WorldWideScience

Sample records for cell-laden hydrogel droplets

  1. Layer by layer three-dimensional tissue epitaxy by cell-laden hydrogel droplets.

    Science.gov (United States)

    Moon, SangJun; Hasan, Syed K; Song, Young S; Xu, Feng; Keles, Hasan Onur; Manzur, Fahim; Mikkilineni, Sohan; Hong, Jong Wook; Nagatomi, Jiro; Haeggstrom, Edward; Khademhosseini, Ali; Demirci, Utkan

    2010-02-01

    The ability to bioengineer three-dimensional (3D) tissues is a potentially powerful approach to treat diverse diseases such as cancer, loss of tissue function, or organ failure. Traditional tissue engineering methods, however, face challenges in fabricating 3D tissue constructs that resemble the native tissue microvasculature and microarchitectures. We have developed a bioprinter that can be used to print 3D patches of smooth muscle cells (5 mm x 5 mm x 81 microm) encapsulated within collagen. Current inkjet printing systems suffer from loss of cell viability and clogging. To overcome these limitations, we developed a system that uses mechanical valves to print high viscosity hydrogel precursors containing cells. The bioprinting platform that we developed enables (i) printing of multilayered 3D cell-laden hydrogel structures (16.2 microm thick per layer) with controlled spatial resolution (proximal axis: 18.0 +/- 7.0 microm and distal axis: 0.5 +/- 4.9 microm), (ii) high-throughput droplet generation (1 s per layer, 160 droplets/s), (iii) cell seeding uniformity (26 +/- 2 cells/mm(2) at 1 million cells/mL, 122 +/- 20 cells/mm(2) at 5 million cells/mL, and 216 +/- 38 cells/mm(2) at 10 million cells/mL), and (iv) long-term viability in culture (>90%, 14 days). This platform to print 3D tissue constructs may be beneficial for regenerative medicine applications by enabling the fabrication of printed replacement tissues.

  2. Gellan gum microgel-reinforced cell-laden gelatin hydrogels

    OpenAIRE

    Shin, Hyeongho; Olsen, Bradley D.; Khademhosseini, Ali

    2013-01-01

    The relatively weak mechanical properties of hydrogels remain a major drawback for their application as load-bearing tissue scaffolds. Previously, we developed cell-laden double-network (DN) hydrogels that were composed of photocrosslinkable gellan gum (GG) and gelatin. Further research into the materials as tissue scaffolds determined that the strength of the DN hydrogels decreased when they were prepared at cell-compatible conditions, and the encapsulated cells in the DN hydrogels did not f...

  3. Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels.

    Science.gov (United States)

    Bertassoni, Luiz E; Cardoso, Juliana C; Manoharan, Vijayan; Cristino, Ana L; Bhise, Nupura S; Araujo, Wesleyan A; Zorlutuna, Pinar; Vrana, Nihal E; Ghaemmaghami, Amir M; Dokmeci, Mehmet R; Khademhosseini, Ali

    2014-06-01

    Fabrication of three dimensional (3D) organoids with controlled microarchitectures has been shown to enhance tissue functionality. Bioprinting can be used to precisely position cells and cell-laden materials to generate controlled tissue architecture. Therefore, it represents an exciting alternative for organ fabrication. Despite the rapid progress in the field, the development of printing processes that can be used to fabricate macroscale tissue constructs from ECM-derived hydrogels has remained a challenge. Here we report a strategy for bioprinting of photolabile cell-laden methacrylated gelatin (GelMA) hydrogels. We bioprinted cell-laden GelMA at concentrations ranging from 7 to 15% with varying cell densities and found a direct correlation between printability and the hydrogel mechanical properties. Furthermore, encapsulated HepG2 cells preserved cell viability for at least eight days following the bioprinting process. In summary, this work presents a strategy for direct-write bioprinting of a cell-laden photolabile ECM-derived hydrogel, which may find widespread application for tissue engineering, organ printing and the development of 3D drug discovery platforms.

  4. 3-Dimensional cell-laden nano-hydroxyapatite/protein hydrogels for bone regeneration applications

    Energy Technology Data Exchange (ETDEWEB)

    Sadat-Shojai, Mehdi, E-mail: msadatshojai@gmail.com [Department of Chemistry, College of Sciences, Shiraz University, Shiraz 71454 (Iran, Islamic Republic of); Department of Biomaterials, Iran Polymer and Petrochemical Institute, Tehran (Iran, Islamic Republic of); Khorasani, Mohammad-Taghi [Department of Biomaterials, Iran Polymer and Petrochemical Institute, Tehran (Iran, Islamic Republic of); Jamshidi, Ahmad [Department of Novel Drug Delivery Systems, Iran Polymer and Petrochemical Institute, Tehran (Iran, Islamic Republic of)

    2015-04-01

    The ability to encapsulate cells in three-dimensional (3D) protein-based hydrogels is potentially of benefit for tissue engineering and regenerative medicine. However, as a result of their poor mechanical strength, protein-based hydrogels have traditionally been considered for soft tissue engineering only. Hence, in this study we tried to render these hydrogels suitable for hard tissue regeneration, simply by incorporation of bioactive nano-hydroxyapatite (HAp) into a photocrosslinkable gelatin hydrogel. Different cell types were also encapsulated in three dimensions in the resulting composites to prepare cell-laden constructs. According to the results, HAp significantly improves the stiffness of gelatin hydrogels, while it maintains their structural integrity and swelling ratio. It was also found that while the bare hydrogel (control) was completely inert in terms of bioactivity, a homogeneous 3D mineralization occurs throughout the nanocomposites after incubation in simulated body fluid. Moreover, encapsulated cells readily elongated, proliferated, and formed a 3D interconnected network with neighboring cells in the nanocomposite, showing the suitability of the nano-HAp/protein hydrogels for cellular growth in 3D. Therefore, the hydrogel nanocomposites developed in this study may be promising candidates for preparing cell-laden tissue-like structures with enhanced stiffness and increased osteoconductivity to induce bone formation in vivo. - Highlights: • We tried to render protein-based hydrogels suitable for hard tissue regeneration. • We developed a three-component system comprising hydrogel, nano-HAp, and cells. • Nano-HAp significantly improved the mechanical strength of hydrogel. • Encapsulated cells readily elongated and proliferated in 3D cell-laden nanocomposite. • 3D deposition of bone crystals occurred in the hydrogel nanocomposites.

  5. Rapid Fabrication of Cell-Laden Alginate Hydrogel 3D Structures by Micro Dip-Coating

    Science.gov (United States)

    Ghanizadeh Tabriz, Atabak; Mills, Christopher G.; Mullins, John J.; Davies, Jamie A.; Shu, Wenmiao

    2017-01-01

    Development of a simple, straightforward 3D fabrication method to culture cells in 3D, without relying on any complex fabrication methods, remains a challenge. In this paper, we describe a new technique that allows fabrication of scalable 3D cell-laden hydrogel structures easily, without complex machinery: the technique can be done using only apparatus already available in a typical cell biology laboratory. The fabrication method involves micro dip-coating of cell-laden hydrogels covering the surface of a metal bar, into the cross-linking reagents calcium chloride or barium chloride to form hollow tubular structures. This method can be used to form single layers with thickness ranging from 126 to 220 µm or multilayered tubular structures. This fabrication method uses alginate hydrogel as the primary biomaterial and a secondary biomaterial can be added depending on the desired application. We demonstrate the feasibility of this method, with survival rate over 75% immediately after fabrication and normal responsiveness of cells within these tubular structures using mouse dermal embryonic fibroblast cells and human embryonic kidney 293 cells containing a tetracycline-responsive, red fluorescent protein (tHEK cells). PMID:28286747

  6. Microfabrication of proangiogenic cell-laden alginate-g-pyrrole hydrogels.

    Science.gov (United States)

    DeVolder, Ross J; Zill, Andrew T; Jeong, Jae H; Kong, Hyunjoon

    2012-11-01

    Cells have been extensively studied for their uses in various therapies because of their capacities to produce therapeutic proteins and recreate new tissues. It has often been suggested that the efficacy of cell therapies can greatly be improved through the ability to localize and regulate cellular activities at a transplantation site; however, the technologies for this control are lacking. Therefore, this study reports a cell-Laden hydrogel patch engineered to support the proliferation and angiogenic growth factor expression of cells adhered to their surfaces, and to further promote neovascularization. Hydrogels consisting of alginate chemically linked with pyrrole units, termed alginate-g-pyrrole, were prepared through an oxidative cross-linking reaction between pyrrole units. Fibroblasts adhered to the alginate-g-pyrrole hydrogels, and exhibited increased proliferation and overall vascular endothelial growth factor (VEGF) expression, compared to those on pyrrole-free hydrogels. Furthermore, the alginate-g-pyrrole hydrogel surfaces were modified to present microposts, subsequently increasing the amount of pyrrole units on their surfaces. Cells adhered to the microfabricated gel surfaces exhibited increased proliferation and overall VEGF expression proportional to the density of the microposts. The resulting micropatterned alginate-g-pyrrole hydrogels exhibited increases in the size and density of mature blood vessels when implanted on chick chorioallantoic membranes (CAMs). The hydrogel system developed in this study will be broadly useful for improving the efficacy of a wide array of cell-based wound healing and tissue regenerative therapies.

  7. Three-dimensional bioprinting of complex cell laden alginate hydrogel structures.

    Science.gov (United States)

    Tabriz, Atabak Ghanizadeh; Hermida, Miguel A; Leslie, Nicholas R; Shu, Wenmiao

    2015-12-21

    Different bioprinting techniques have been used to produce cell-laden alginate hydrogel structures, however these approaches have been limited to 2D or simple three-dimension (3D) structures. In this study, a new extrusion based bioprinting technique was developed to produce more complex alginate hydrogel structures. This was achieved by dividing the alginate hydrogel cross-linking process into three stages: primary calcium ion cross-linking for printability of the gel, secondary calcium cross-linking for rigidity of the alginate hydrogel immediately after printing and tertiary barium ion cross-linking for long-term stability of the alginate hydrogel in culture medium. Simple 3D structures including tubes were first printed to ensure the feasibility of the bioprinting technique and then complex 3D structures such as branched vascular structures were successfully printed. The static stiffness of the alginate hydrogel after printing was 20.18 ± 1.62 KPa which was rigid enough to sustain the integrity of the complex 3D alginate hydrogel structure during the printing. The addition of 60 mM barium chloride was found to significantly extend the stability of the cross-linked alginate hydrogel from 3 d to beyond 11 d without compromising the cellular viability. The results based on cell bioprinting suggested that viability of U87-MG cells was 93 ± 0.9% immediately after bioprinting and cell viability maintained above 88% ± 4.3% in the alginate hydrogel over the period of 11 d.

  8. In Vivo Chondrogenesis in 3D Bioprinted Human Cell-laden Hydrogel Constructs

    Science.gov (United States)

    Möller, Thomas; Hägg, Daniel; Brantsing, Camilla; Rotter, Nicole; Apelgren, Peter; Lindahl, Anders; Kölby, Lars; Gatenholm, Paul

    2017-01-01

    Background: The three-dimensional (3D) bioprinting technology allows creation of 3D constructs in a layer-by-layer fashion utilizing biologically relevant materials such as biopolymers and cells. The aim of this study is to investigate the use of 3D bioprinting in a clinically relevant setting to evaluate the potential of this technique for in vivo chondrogenesis. Methods: Thirty-six nude mice (Balb-C, female) received a 5- × 5- × 1-mm piece of bioprinted cell-laden nanofibrillated cellulose/alginate construct in a subcutaneous pocket. Four groups of printed constructs were used: (1) human (male) nasal chondrocytes (hNCs), (2) human (female) bone marrow–derived mesenchymal stem cells (hBMSCs), (3) coculture of hNCs and hBMSCs in a 20/80 ratio, and (4) Cell-free scaffolds (blank). After 14, 30, and 60 days, the scaffolds were harvested for histological, immunohistochemical, and mechanical analysis. Results: The constructs had good mechanical properties and keep their structural integrity after 60 days of implantation. For both the hNC constructs and the cocultured constructs, a gradual increase of glycosaminoglycan production and hNC proliferation was observed. However, the cocultured group showed a more pronounced cell proliferation and enhanced deposition of human collagen II demonstrated by immunohistochemical analysis. Conclusions: In vivo chondrogenesis in a 3D bioprinted human cell-laden hydrogel construct has been demonstrated. The trophic role of the hBMSCs in stimulating hNC proliferation and matrix deposition in the coculture group suggests the potential of 3D bioprinting of human cartilage for future application in reconstructive surgery. PMID:28280669

  9. Hydrosoluble, UV-crosslinkable and injectable chitosan for patterned cell-laden microgel and rapid transdermal curing hydrogel in vivo.

    Science.gov (United States)

    Li, Baoqiang; Wang, Lei; Xu, Feng; Gang, Xiaomin; Demirci, Utkan; Wei, Daqing; Li, Ying; Feng, Yujie; Jia, Dechang; Zhou, Yu

    2015-08-01

    Natural and biodegradable chitosan with unique amino groups has found widespread applications in tissue engineering and drug delivery. However, its applications have been limited by the poor solubility of native chitosan in neutral pH solution, which subsequently fails to achieve cell-laden hydrogel at physiological pH. To address this, we incorporated UV crosslinking ability in chitosan, allowing fabrication of patterned cell-laden and rapid transdermal curing hydrogel in vivo. The hydrosoluble, UV crosslinkable and injectable N-methacryloyl chitosan (N-MAC) was synthesized via single-step chemoselective N-acylation reaction, which simultaneously endowed chitosan with well solubility in neutral pH solution, UV crosslinkable ability and injectability. The solubility of N-MAC in neutral pH solution increased 2.21-fold with substitution degree increasing from 10.9% to 28.4%. The N-MAC allowed fabrication of cell-laden microgels with on-demand patterns via photolithography, and the cell viability in N-MAC hydrogel maintained 96.3 ± 1.3% N-MAC allowed rapid transdermal curing hydrogel in vivo within 60s through minimally invasive clinical surgery. Histological analysis revealed that low-dose UV irradiation hardly induced skin injury and acute inflammatory response disappeared after 7 days. N-MAC would allow rapid, robust and cost-effective fabrication of patterned cell-laden polysaccharide microgels with unique amino groups serving as building blocks for tissue engineering and rapid transdermal curing hydrogel in vivo for localized and sustained protein delivery.

  10. Fabrication of 3D cell-laden hydrogel microstructures through photo-mold patterning.

    Science.gov (United States)

    Occhetta, P; Sadr, N; Piraino, F; Redaelli, A; Moretti, M; Rasponi, M

    2013-09-01

    Native tissues are characterized by spatially organized three-dimensional (3D) microscaled units which functionally define cells-cells and cells-extracellular matrix interactions. The ability to engineer biomimetic constructs mimicking these 3D microarchitectures is subject to the control over cell distribution and organization. In the present study we introduce a novel protocol to generate 3D cell laden hydrogel micropatterns with defined size and shape. The method, named photo-mold patterning (PMP), combines hydrogel micromolding within polydimethylsiloxane (PDMS) stamps and photopolymerization through a recently introduced biocompatible ultraviolet (UVA) activated photoinitiator (VA-086). Exploiting PDMS micromolds as geometrical constraints for two methacrylated prepolymers (polyethylene glycol diacrylate and gelatin methacrylate), micrometrically resolved structures were obtained within a 3 min exposure to a low cost and commercially available UVA LED. The PMP was validated both on a continuous cell line (human umbilical vein endothelial cells expressing green fluorescent protein, HUVEC GFP) and on primary human bone marrow stromal cells (BMSCs). HUVEC GFP and BMSCs were exposed to 1.5% w/v VA-086 and UVA light (1 W, 385 nm, distance from sample = 5 cm). Photocrosslinking conditions applied during the PMP did not negatively affect cells viability or specific metabolic activity. Quantitative analyses demonstrated the potentiality of PMP to uniformly embed viable cells within 3D microgels, creating biocompatible and favorable environments for cell proliferation and spreading during a seven days' culture. PMP can thus be considered as a promising and cost effective tool for designing spatially accurate in vitro models and, in perspective, functional constructs.

  11. Bioprinting 3D cell-laden hydrogel microarray for screening human periodontal ligament stem cell response to extracellular matrix.

    Science.gov (United States)

    Ma, Yufei; Ji, Yuan; Huang, Guoyou; Ling, Kai; Zhang, Xiaohui; Xu, Feng

    2015-12-22

    Periodontitis is an inflammatory disease negatively affecting up to 15% of adults worldwide. Periodontal ligament stem cells (PDLSCs) hold great promises for periodontal tissue regeneration, where it is necessary to find proper extracellular matrix (ECM) materials (e.g., composition, concentration). In this study, we proposed a bioprinting-based approach to generate nano-liter sized three-dimensional (3D) cell-laden hydrogel array with gradient of ECM components, through controlling the volume ratio of two hydrogels, such as gelatin methacrylate (GelMA) and poly(ethylene glycol) (PEG) dimethacrylate. The resulting cell-laden array with a gradient of GelMA/PEG composition was used to screen human PDLSC response to ECM. The behavior (e.g., cell viability, spreading) of human PDLSCs in GelMA/PEG array were found to be depended on the volume ratios of GelMA/PEG, with cell viability and spreading area decreased along with increasing the ratio of PEG. The developed approach would be useful for screening cell-biomaterial interaction in 3D and promoting regeneration of functional tissue.

  12. In vitro-ex vivo correlations between a cell-laden hydrogel and mucosal tissue for screening composite delivery systems.

    Science.gov (United States)

    Blakney, Anna K; Little, Adam B; Jiang, Yonghou; Woodrow, Kim A

    2016-11-01

    Composite delivery systems where drugs are electrospun in different layers and vary the drug stacking-order are posited to affect bioavailability. We evaluated how the formulation characteristics of both burst- and sustained-release electrospun fibers containing three physicochemically diverse drugs: dapivirine (DPV), maraviroc (MVC) and tenofovir (TFV) affect in vitro and ex vivo release. We developed a poly(hydroxyethyl methacrylate) (pHEMA) hydrogel release platform for the rapid, inexpensive in vitro evaluation of burst- and sustained-release topical or dermal drug delivery systems with varying microarchitecture. We investigated properties of the hydrogel that could recapitulate ex vivo release into nonhuman primate vaginal tissue. Using a dimethyl sulfoxide extraction protocol and high-performance liquid chromatography analysis, we achieved >93% recovery from the hydrogels and >88% recovery from tissue explants for all three drugs. We found that DPV loading, but not stacking order (layers of fiber containing a single drug) or microarchitecture (layers with isolated drug compared to all drugs in the same layer) impacted the burst release in vitro and ex vivo. Our burst-release formulations showed a correlation for DPV accumulation between the hydrogel and tissue (R(2)=( )0.80), but the correlation was not significant for MVC or TFV. For the sustained-release formulations, the PLGA/PCL content did not affect TFV release in vitro or ex vivo. Incorporation of cells into the hydrogel matrix improved the correlation between hydrogel and tissue explant release for TFV. We expect that this hydrogel-tissue mimic may be a promising preclinical model to evaluate topical or transdermal drug delivery systems with complex microarchitectures.

  13. Cell-laden photocrosslinked GelMA-DexMA copolymer hydrogels with tunable mechanical properties for tissue engineering.

    Science.gov (United States)

    Wang, Hang; Zhou, Lei; Liao, Jingwen; Tan, Ying; Ouyang, Kongyou; Ning, Chenyun; Ni, Guoxin; Tan, Guoxin

    2014-09-01

    To effectively repair or replace damaged tissues, it is necessary to design three dimensional (3D) extracellular matrix (ECM) mimicking scaffolds with tunable biomechanical properties close to the desired tissue application. In the present work, gelatin methacrylate (GelMA) and dextran glycidyl methacrylate (DexMA) with tunable mechanical and biological properties were utilized to prepared novel bicomponent polymeric hydrogels by cross-linking polymerization using photoinitiation. We controlled the degree of substitution (DS) of glycidyl methacrylate in DexMA so that they could obtain relevant mechanical properties. The results indicated that copolymer hydrogels demonstrated a lower swelling ratio and higher compressive modulus as compared to the GelMA. Moreover, all of the hydrogels exhibited a honeycomb-like architecture, the pore sizes decreased as DS increased, and NIH-3T3 fibroblasts encapsulated in these hydrogels all exhibited excellent viability. These characteristics suggest a class of photocrosslinkable, tunable mechanically copolymer hydrogels that may find potential application in tissue engineering and regenerative medicine applications.

  14. 3D bioprinting of neural stem cell-laden thermoresponsive biodegradable polyurethane hydrogel and potential in central nervous system repair.

    Science.gov (United States)

    Hsieh, Fu-Yu; Lin, Hsin-Hua; Hsu, Shan-Hui

    2015-12-01

    The 3D bioprinting technology serves as a powerful tool for building tissue in the field of tissue engineering. Traditional 3D printing methods involve the use of heat, toxic organic solvents, or toxic photoinitiators for fabrication of synthetic scaffolds. In this study, two thermoresponsive water-based biodegradable polyurethane dispersions (PU1 and PU2) were synthesized which may form gel near 37 °C without any crosslinker. The stiffness of the hydrogel could be easily fine-tuned by the solid content of the dispersion. Neural stem cells (NSCs) were embedded into the polyurethane dispersions before gelation. The dispersions containing NSCs were subsequently printed and maintained at 37 °C. The NSCs in 25-30% PU2 hydrogels (∼680-2400 Pa) had excellent proliferation and differentiation but not in 25-30% PU1 hydrogels. Moreover, NSC-laden 25-30% PU2 hydrogels injected into the zebrafish embryo neural injury model could rescue the function of impaired nervous system. However, NSC-laden 25-30% PU1 hydrogels only showed a minor repair effect in the zebrafish model. In addition, the function of adult zebrafish with traumatic brain injury was rescued after implantation of the 3D-printed NSC-laden 25% PU2 constructs. Therefore, the newly developed 3D bioprinting technique involving NSCs embedded in the thermoresponsive biodegradable polyurethane ink offers new possibilities for future applications of 3D bioprinting in neural tissue engineering.

  15. 载细胞水凝胶体系中微通道结构对营养物输送能力的影响%Influence of Microfluidic Channels on Delivery of Nutrient in Cell-Laden Hydrogels

    Institute of Scientific and Technical Information of China (English)

    黄国友; 徐峰; 周丽宏; 周进雄; 陈咏梅; 卢天健

    2011-01-01

    为了优化栽细胞水凝胶中微通道的结构设计,通过数值模拟,系统地研究了孔隙率、微通道数目及排布方式等参数对营养物输送能力的影响.研究结果表明:在给定微通道数目下,微通道尺寸和间距均存在最优值,与此相对应的营养物输送能力最佳;当孔隙率或微通道数目较大时,微通道排布方式对营养物的输送能力无明显影响.通过参数优化,可以更好地提高微通道的营养物输送能力,尤其是保证远离微通道表面的细胞得到充足的营养物供应,为组织工程化组织中微通道结构的优化设计提供指导.%To optimize the structural parameters of microfluidic cell-laden hydrogels embedded with microchannels, a mathematical model is developed to systematically investigate the influence of microchannel size, inter-channel separation, number of channels and their distribution on nutrient transport in cell-laden hydrogels. The simulation results show that there exist the optimal microchannel size and inter-channel separation for enhanced nutrient utilization. While the porosity is fixed, the capability of nutrient transport is improved with the increasing channel number.The distribution of channels exerts slight effect on the nutrient delivery as the number of channels gets beyond 6. In addition, the nutrient transport can be enhanced by adjusting the diffusion properties of hydrogels. The present results provide useful guidance for the experimental design of microfluidic tissue constructs.

  16. Engineering zonal cartilaginous tissue by modulating oxygen levels and mechanical cues through the depth of infrapatellar fat pad stem cell laden hydrogels.

    Science.gov (United States)

    Luo, Lu; O'Reilly, Adam R; Thorpe, Stephen D; Buckley, Conor T; Kelly, Daniel J

    2016-05-03

    Engineering tissues with a structure and spatial composition mimicking those of native articular cartilage (AC) remains a challenge. This study examined if infrapatellar fat pad-derived stem cells (FPSCs) can be used to engineer cartilage grafts with a bulk composition and a spatial distribution of matrix similar to the native tissue. In an attempt to mimic the oxygen gradients and mechanical environment within AC, FPSC-laden hydrogels (either 2 mm or 4 mm in height) were confined to half of their thickness and/or subjected to dynamic compression (DC). Confining FPSC-laden hydrogels was predicted to accentuate the gradient in oxygen tension through the depth of the constructs (higher in the top and lower in the bottom), leading to enhanced glycosaminoglycan (GAG) and collagen synthesis in 2 mm high tissues. When subjected to DC alone, both GAG and collagen accumulation increased within 2 mm high unconfined constructs. Furthermore, the dynamic modulus of constructs increased from 0.96 MPa to 1.45 MPa following the application of DC. There was no synergistic benefit of coupling confinement and DC on overall levels of matrix accumulation; however in all constructs, irrespective of their height, the combination of these boundary conditions led to the development of engineered tissues that spatially best resembled native AC. The superficial region of these constructs mimicked that of native tissue, staining weakly for GAG, strongly for type II collagen, and in 4 mm high tissues more intensely for proteoglycan 4 (lubricin). This study demonstrated that FPSCs respond to joint-like environmental conditions by producing cartilage tissues mimicking native AC. Copyright © 2016 John Wiley & Sons, Ltd.

  17. Adsorption of protein-coated lipid droplets to mixed biopolymer hydrogel surfaces: role of biopolymer diffusion.

    Science.gov (United States)

    Vargas, Maria; Weiss, Jochen; McClements, D Julian

    2007-12-18

    The adsorption of charged particles to hydrogel surfaces is important in a number of natural and industrial processes. In this study, the adsorption of cationic lipid droplets to the surfaces of anionic hydrogels was examined. An oil-in-water emulsion containing cationic beta-lactoglobulin-coated lipid droplets was prepared (d32=0.24 microm, zeta=+74 mV, pH 3.0). An anionic hydrogel containing 0.1 wt % beet pectin and 1.5 wt % agar (pH 3.0) was prepared. Emulsions containing different lipid droplet concentrations (0.3-5 wt %) were brought into contact with the hydrogel surfaces for different times (0-24 h). The adsorption of lipid droplets to the hydrogel surfaces could not be explained by a typical adsorption isotherm. We found that the electrical charge on the nonadsorbed lipid droplets became less positive or even became negative in the presence of the hydrogel and that extensive droplet aggregation occurred, which was attributed to the ability of pectin molecules to diffuse through the hydrogels and interact with the lipid droplets. These results may have important consequences for understanding certain industrial and biological processes, as well as for the design of controlled or triggered release systems.

  18. Enhanced cellular activities of polycaprolactone/alginate-based cell-laden hierarchical scaffolds for hard tissue engineering applications.

    Science.gov (United States)

    Lee, HyeongJin; Kim, GeunHyung

    2014-09-15

    Biomedical scaffolds have been widely investigated because they are essential for support and promotion of cell adhesion, proliferation and differentiation in three-dimensional (3D) structures. An ideal scaffold should be highly porous to enable efficient nutrient and oxygen transfer and have a 3D structure that provides optimal micro-environmental conditions for the seeded cells to obtain homogeneous growth after a long culture period. In this study, new hierarchical osteoblast-like cell (MG-63)-laden scaffolds consisting of micro-sized struts/inter-layered micro-nanofibres and cell-laden hydrogel struts with mechanically stable and biologically superior properties were introduced. Poly(ethylene oxide) (PEO) was used as a sacrificial component to generate pores within the cell-laden hydrogel struts to attain a homogeneous cell distribution and rapid cell growth in the scaffold interior. The alginate-based cell-laden struts with PEO induced fast/homogeneous cell release, in contrast to nonporous cell-laden struts. Various weight fractions (0.5, 1, 2, 3 and 3.5 wt%) of PEO were used, of which 2 wt% PEO in the cell-laden strut resulted in the most appropriate cell release and enhanced biological activities (cell proliferation and calcium deposition), compared to nonporous cell-laden struts.

  19. Multi-compartment encapsulation of communicating droplets and droplet networks in hydrogel as a model for artificial cells

    Science.gov (United States)

    Bayoumi, Mariam; Bayley, Hagan; Maglia, Giovanni; Sapra, K. Tanuj

    2017-01-01

    Constructing a cell mimic is a major challenge posed by synthetic biologists. Efforts to this end have been primarily focused on lipid- and polymer-encapsulated containers, liposomes and polymersomes, respectively. Here, we introduce a multi-compartment, nested system comprising aqueous droplets stabilized in an oil/lipid mixture, all encapsulated in hydrogel. Functional capabilities (electrical and chemical communication) were imparted by protein nanopores spanning the lipid bilayer formed at the interface of the encapsulated aqueous droplets and the encasing hydrogel. Crucially, the compartmentalization enabled the formation of two adjoining lipid bilayers in a controlled manner, a requirement for the realization of a functional protocell or prototissue. PMID:28367984

  20. Enhancing the biocompatibility of microfluidics-assisted fabrication of cell-laden microgels with channel geometry.

    Science.gov (United States)

    Kim, Suntae; Oh, Jonghyun; Cha, Chaenyung

    2016-11-01

    Microfluidic flow-focusing devices (FFD) are widely used to generate monodisperse droplets and microgels with controllable size, shape and composition for various biomedical applications. However, highly inconsistent and often low viability of cells encapsulated within the microgels prepared via microfluidic FFD has been a major concern, and yet this aspect has not been systematically explored. In this study, we demonstrate that the biocompatibility of microfluidic FFD to fabricate cell-laden microgels can be significantly enhanced by controlling the channel geometry. When a single emulsion ("single") microfluidic FFD is used to fabricate cell-laden microgels, there is a significant decrease and batch-to-batch variability in the cell viability, regardless of their size and composition. It is determined that during droplet generation, some of the cells are exposed to the oil phase which is shown to have a cytotoxic effect. Therefore, a microfluidic device with a sequential ('double') flow-focusing channels is employed instead, in which a secondary aqueous phase containing cells enters the primary aqueous phase, so the cells' exposure to the oil phase is minimized by directing them to the center of droplets. This microfluidic channel geometry significantly enhances the biocompatibility of cell-laden microgels, while maintaining the benefits of a typical microfluidic process. This study therefore provides a simple and yet highly effective strategy to improve the biocompatibility of microfluidic fabrication of cell-laden microgels.

  1. Hydrogel Droplet Microfluidics for High-Throughput Single Molecule/Cell Analysis.

    Science.gov (United States)

    Zhu, Zhi; Yang, Chaoyong James

    2017-01-17

    Heterogeneity among individual molecules and cells has posed significant challenges to traditional bulk assays, due to the assumption of average behavior, which would lose important biological information in heterogeneity and result in a misleading interpretation. Single molecule/cell analysis has become an important and emerging field in biological and biomedical research for insights into heterogeneity between large populations at high resolution. Compared with the ensemble bulk method, single molecule/cell analysis explores the information on time trajectories, conformational states, and interactions of individual molecules/cells, all key factors in the study of chemical and biological reaction pathways. Various powerful techniques have been developed for single molecule/cell analysis, including flow cytometry, atomic force microscopy, optical and magnetic tweezers, single-molecule fluorescence spectroscopy, and so forth. However, some of them have the low-throughput issue that has to analyze single molecules/cells one by one. Flow cytometry is a widely used high-throughput technique for single cell analysis but lacks the ability for intercellular interaction study and local environment control. Droplet microfluidics becomes attractive for single molecule/cell manipulation because single molecules/cells can be individually encased in monodisperse microdroplets, allowing high-throughput analysis and manipulation with precise control of the local environment. Moreover, hydrogels, cross-linked polymer networks that swell in the presence of water, have been introduced into droplet microfluidic systems as hydrogel droplet microfluidics. By replacing an aqueous phase with a monomer or polymer solution, hydrogel droplets can be generated on microfluidic chips for encapsulation of single molecules/cells according to the Poisson distribution. The sol-gel transition property endows the hydrogel droplets with new functionalities and diversified applications in single

  2. Three-dimensional fiber deposition of cell-laden, viable, patterned constructs for bone tissue printing.

    Science.gov (United States)

    Fedorovich, Natalja E; De Wijn, Joost R; Verbout, Abraham J; Alblas, Jacqueline; Dhert, Wouter J A

    2008-01-01

    Organ or tissue printing, a novel approach in tissue engineering, creates layered, cell-laden hydrogel scaffolds with a defined three-dimensional (3D) structure and organized cell placement. In applying the concept of tissue printing for the development of vascularized bone grafts, the primary focus lies on combining endothelial progenitors and bone marrow stromal cells (BMSCs). Here we characterize the applicability of 3D fiber deposition with a plotting device, Bioplotter, for the fabrication of spatially organized, cell-laden hydrogel constructs. The viability of printed BMSCs was studied in time, in several hydrogels, and extruded from different needle diameters. Our findings indicate that cells survive the extrusion and that their subsequent viability was not different from that of unprinted cells. The applied extrusion conditions did not affect cell survival, and BMSCs could subsequently differentiate along the osteoblast lineage. Furthermore, we were able to combine two distinct cell populations within a single scaffold by exchanging the printing syringe during deposition, indicating that this 3D fiber deposition system is suited for the development of bone grafts containing multiple cell types.

  3. Enzymatic Crosslinking of Polymer Conjugates is Superior over Ionic or UV Crosslinking for the On-Chip Production of Cell-Laden Microgels

    NARCIS (Netherlands)

    Henke, S.J.; Leijten, J.C.H.; Kemna, E.W.M.; Neubauer, M.; Fery, A.; Berg, van den A.; Apeldoorn, van A.A.; Karperien, H.B.J.

    2016-01-01

    Cell-laden micrometer-sized hydrogels (microgels) hold great promise for improving high throughput ex-vivo drug screening and engineering biomimetic tissues. Microfluidics is a powerful tool to produce microgels. However, only a limited amount of biomaterials have been reported to be compatible with

  4. Bioprinting three-dimensional cell-laden tissue constructs with controllable degradation

    Science.gov (United States)

    Wu, Zhengjie; Su, Xin; Xu, Yuanyuan; Kong, Bin; Sun, Wei; Mi, Shengli

    2016-01-01

    Alginate hydrogel is a popular biologically inert material that is widely used in 3D bioprinting, especially in extrusion-based printing. However, the printed cells in this hydrogel could not degrade the surrounding alginate gel matrix, causing them to remain in a poorly proliferating and non-differentiating state. Here, we report a novel study of the 3D printing of human corneal epithelial cells (HCECs)/collagen/gelatin/alginate hydrogel incubated with a medium containing sodium citrate to obtain degradation-controllable cell-laden tissue constructs. The 3D-printed hydrogel network with interconnected channels and a macroporous structure was stable and achieved high cell viability (over 90%). By altering the mole ratio of sodium citrate/sodium alginate, the degradation time of the bioprinting constructs can be controlled. Cell proliferation and specific marker protein expression results also revealed that with the help of sodium citrate degradation, the printed HCECs showed a higher proliferation rate and greater cytokeratin 3(CK3) expression, indicating that this newly developed method may help to improve the alginate bioink system for the application of 3D bioprinting in tissue engineering. PMID:27091175

  5. Evaluation of Photocrosslinked Lutrol Hydrogel for Tissue Printing Applications

    NARCIS (Netherlands)

    Fedorovich, Natalja E.; Swennen, Ives; Girones, Jordi; Moroni, Lorenzo; Blitterswijk, van Clemens A.; Schacht, Etienne; Alblas, Jacqueline; Dhert, Wouter J.A.

    2009-01-01

    Application of hydrogels in tissue engineering and innovative strategies such as organ printing, which is based on layered 3D deposition of cell-laden hydrogels, requires design of novel hydrogel matrices. Hydrogel demands for 3D printing include: 1) preservation of the printed shape after the depos

  6. Pneumatic-aided micro-molding for flexible fabrication of homogeneous and heterogeneous cell-laden microgels.

    Science.gov (United States)

    Ma, Chao; Tian, Chang; Zhao, Lei; Wang, Jinyi

    2016-07-01

    Microgels are favorable for numerous applications such as drug delivery, biomaterials science and tissue engineering. Conventionally, photolithographic methods and micro-molding techniques are extensively exploited to prepare microgels; however, they are, respectively, limited to photocrosslinkable polymers and inadequate to generate serially patterned hydrogels due to the static nature of utilized molds. Herein, we proposed a simple and versatile approach, termed pneumatic-aided micro-molding (PAM), to flexibly fabricate microgels with precise control over multiple cell types and microarchitectures of hydrogels through strategically designed pneumatic microvalves. Using the PAM approach, different cells were encapsulated in various hydrogels that had well-defined geometries. Additionally, single/multiple micro-channeled cell-laden microgels were fabricated, of which the shape, number and arrangement could be finely tuned by varying microvalve configurations. Moreover, multi-compartmental microgels comprising composite hydrogel structures were engineered following a two-step PAM, which demonstrated the utility for biomimetically constructing a three-dimensional (3D) liver microtissue composed of a radially orchestrated network of hepatic cords and sinusoids. The resulting microtissue resembled the organizational complexity of the liver lobule and was applied for the evaluation of acetaminophen-induced hepatotoxicity. Collectively, the PAM strategy could be a useful and powerful tool in biomedical engineering, in vitro 3D cell culture, and fundamental biological studies.

  7. The 3D printing of gelatin methacrylamide cell-laden tissue-engineered constructs with high cell viability.

    Science.gov (United States)

    Billiet, Thomas; Gevaert, Elien; De Schryver, Thomas; Cornelissen, Maria; Dubruel, Peter

    2014-01-01

    In the present study, we report on the combined efforts of material chemistry, engineering and biology as a systemic approach for the fabrication of high viability 3D printed macroporous gelatin methacrylamide constructs. First, we propose the use and optimization of VA-086 as a photo-initiator with enhanced biocompatibility compared to the conventional Irgacure 2959. Second, a parametric study on the printing of gelatins was performed in order to characterize and compare construct architectures. Hereby, the influence of the hydrogel building block concentration, the printing temperature, the printing pressure, the printing speed, and the cell density were analyzed in depth. As a result, scaffolds could be designed having a 100% interconnected pore network in the gelatin concentration range of 10-20 w/v%. In the last part, the fabrication of cell-laden scaffolds was studied, whereby the application for tissue engineering was tested by encapsulation of the hepatocarcinoma cell line (HepG2). Printing pressure and needle shape was revealed to impact the overall cell viability. Mechanically stable cell-laden gelatin methacrylamide scaffolds with high cell viability (>97%) could be printed.

  8. Biofabrication of tissue constructs by 3D bioprinting of cell-laden microcarriers.

    Science.gov (United States)

    Levato, Riccardo; Visser, Jetze; Planell, Josep A; Engel, Elisabeth; Malda, Jos; Mateos-Timoneda, Miguel A

    2014-09-01

    Bioprinting allows the fabrication of living constructs with custom-made architectures by spatially controlled deposition of multiple bioinks. This is important for the generation of tissue, such as osteochondral tissue, which displays a zonal composition in the cartilage domain supported by the underlying subchondral bone. Challenges in fabricating functional grafts of clinically relevant size include the incorporation of cues to guide specific cell differentiation and the generation of sufficient cells, which is hard to obtain with conventional cell culture techniques. A novel strategy to address these demands is to combine bioprinting with microcarrier technology. This technology allows for the extensive expansion of cells, while they form multi-cellular aggregates, and their phenotype can be controlled. In this work, living constructs were fabricated via bioprinting of cell-laden microcarriers. Mesenchymal stromal cell (MSC)-laden polylactic acid microcarriers, obtained via static culture or spinner flask expansion, were encapsulated in gelatin methacrylamide-gellan gum bioinks, and the printability of the composite material was studied. This bioprinting approach allowed for the fabrication of constructs with high cell concentration and viability. Microcarrier encapsulation improved the compressive modulus of the hydrogel constructs, facilitated cell adhesion, and supported osteogenic differentiation and bone matrix deposition by MSCs. Bilayered osteochondral models were fabricated using microcarrier-laden bioink for the bone compartment. These findings underscore the potential of this new microcarrier-based biofabrication approach for bone and osteochondral constructs.

  9. Bioprinting of a mechanically enhanced three-dimensional dual cell-laden construct for osteochondral tissue engineering using a multi-head tissue/organ building system

    Science.gov (United States)

    Shim, Jin-Hyung; Lee, Jung-Seob; Kim, Jong Young; Cho, Dong-Woo

    2012-08-01

    The aim of this study was to build a mechanically enhanced three-dimensional (3D) bioprinted construct containing two different cell types for osteochondral tissue regeneration. Recently, the production of 3D cell-laden structures using various scaffold-free cell printing technologies has opened up new possibilities. However, ideal 3D complex tissues or organs have not yet been printed because gel-state hydrogels have been used as the principal material and are unable to maintain the desired 3D structure due to their poor mechanical strength. In this study, thermoplastic biomaterial polycaprolactone (PCL), which shows relatively high mechanical properties as compared with hydrogel, was used as a framework for enhancing the mechanical stability of the bioprinted construct. Two different alginate solutions were then infused into the previously prepared framework consisting of PCL to create the 3D construct for osteochondral printing. For this work, a multi-head tissue/organ building system (MtoBS), which was particularly designed to dispense thermoplastic biomaterial and hydrogel having completely different rheology properties, was newly developed and used to bioprint osteochondral tissue. It was confirmed that the line width, position and volume control of PCL and alginate solutions were adjustable in the MtoBS. Most importantly, dual cell-laden 3D constructs consisting of osteoblasts and chondrocytes were successfully fabricated. Further, the separately dispensed osteoblasts and chondrocytes not only retained their initial position and viability, but also proliferated up to 7 days after being dispensed.

  10. 3D-printed microfluidic chips with patterned, cell-laden hydrogel constructs.

    Science.gov (United States)

    Knowlton, Stephanie; Yu, Chu Hsiang; Ersoy, Fulya; Emadi, Sharareh; Khademhosseini, Ali; Tasoglu, Savas

    2016-06-20

    Three-dimensional (3D) printing offers potential to fabricate high-throughput and low-cost fabrication of microfluidic devices as a promising alternative to traditional techniques which enables efficient design iterations in the development stage. In this study, we demonstrate a single-step fabrication of a 3D transparent microfluidic chip using two alternative techniques: a stereolithography-based desktop 3D printer and a two-step fabrication using an industrial 3D printer based on polyjet technology. This method, compared to conventional fabrication using relatively expensive materials and labor-intensive processes, presents a low-cost, rapid prototyping technique to print functional 3D microfluidic chips. We enhance the capabilities of 3D-printed microfluidic devices by coupling 3D cell encapsulation and spatial patterning within photocrosslinkable gelatin methacryloyl (GelMA). The platform presented here serves as a 3D culture environment for long-term cell culture and growth. Furthermore, we have demonstrated the ability to print complex 3D microfluidic channels to create predictable and controllable fluid flow regimes. Here, we demonstrate the novel use of 3D-printed microfluidic chips as controllable 3D cell culture environments, advancing the applicability of 3D printing to engineering physiological systems for future applications in bioengineering.

  11. Hygroscopic growth and cloud droplet activation of xanthan gum as a proxy for marine hydrogels

    Science.gov (United States)

    Dawson, K. W.; Petters, M. D.; Meskhidze, N.; Petters, S. Suda; Kreidenweis, S. M.

    2016-10-01

    Knowledge of the physical characteristics and chemical composition of marine organic aerosols is needed for the quantification of their effects on cloud microphysical processes and solar radiative transfer. Here we use xanthan gum (XG)—a bacterial biopolymer—as a proxy for marine hydrogels. Measurements were performed for pure XG particles and mixtures of XG with sodium chloride, calcium nitrate, and calcium carbonate. The aerosol hygroscopicity parameter (κ) is derived from hygroscopic growth factor measurements (κgf) at variable water activity (aw) and from cloud condensation nuclei activation efficiency (κccn). The Zdanovskii, Stokes, and Robinson (ZSR) hygroscopicity parameter derived for multicomponent systems (κmix, sol) is used to compare measurements of κgf and κccn. Pure XG shows close agreement of κgf (at aw = 0.9) and κccn of 0.09 and 0.10, respectively. Adding salts to the system results in deviations of κgf (at aw = 0.9) from κccn. The measured κgf and ZSR-derived hygroscopicity parameter (κmix, sol) values for different solutions show close agreement at aw > 0.9, while κgf is lower in comparison to κmix, sol at aw < 0.9. The differences between predicted κmix, sol and measured κgf and κccn values are explained by the effects of hydration and presence of salt ions on the structure of the polymer networks. Results from this study imply that at supersaturations of 0.1 and 0.5%, the presence of 30% sea salt by mass can reduce the activation diameter of pure primary marine organic aerosols from 257 to 156 nm and from 87 to 53 nm, respectively.

  12. The matrix reloaded: the evolution of regenerative hydrogels

    Directory of Open Access Journals (Sweden)

    Esmaiel Jabbari

    2016-05-01

    Full Text Available Cell-laden hydrogels can regenerate lost, damaged or malfunctioning tissues. Clinical success of such hydrogels is strongly dependent on the ability to tune their chemical, physico-mechanical, and biological properties to a specific application. In particular, mimicking the intricate arrangement of cell-interactive ligands of natural tissues is crucial to proper tissue function. Natural extracellular matrix elements represent a unique source for generating such interactions. A plethora of extracellular matrix-based approaches have been explored to augment the regenerative potential of hydrogels. These efforts include the development of matrix-like hydrogels, hydrogels containing matrix-like molecules, hydrogels containing decellularized matrix, hydrogels derived from decellularized matrix, and decellularized tissues as reimplantable matrix hydrogels. Here we review the evolution, strengths and weaknesses of these developments from the perspective of creating tissue regenerating hydrogels.

  13. Fabrication of uniformly cell-laden porous scaffolds using a gas-in-liquid templating technique.

    Science.gov (United States)

    Takei, Takayuki; Aokawa, Ryuta; Shigemitsu, Takamasa; Kawakami, Koei; Yoshida, Masahiro

    2015-11-01

    Design of porous scaffolds in tissue engineering field was challenging. Uniform immobilization of cells in the scaffolds with high porosity was essential for homogeneous tissue formation. The present study was aimed at fabricating uniformly cell-laden porous scaffolds with porosity >74% using the gas-in-liquid foam templating technique. To this end, we used gelatin, microbial transglutaminase and argon gas as a scaffold material, cross-linker of the protein and porogen of scaffold, respectively. We confirmed that a porosity of >74% could be achieved by increasing the gas volume delivered to a gelatin solution. Pore size in the scaffold could be controlled by stirring speed, stirring time and the pore size of the filter through which the gas passed. The foaming technique enabled us to uniformly immobilize a human hepatoblastoma cell line in scaffold. Engraftment efficiency of the cell line entrapped within the scaffold in nude mice was higher than that of cells in free-form. These results showed that the uniformly cell-laden porous scaffolds were promising for tissue engineering.

  14. Contact assembly of cell-laden hollow microtubes through automated micromanipulator tip locating

    Science.gov (United States)

    Wang, Huaping; Shi, Qing; Guo, Yanan; Li, Yanan; Sun, Tao; Huang, Qiang; Fukuda, Toshio

    2017-01-01

    This paper presents an automated contact assembly method to fabricate a cell-laden microtube based on accurate locating of the micromanipulator tip. Essential for delivering nutrients in thick engineered tissues, a vessel-mimetic microtube can be precisely assembled through microrobotic contact biomanipulation. The biomanipulation is a technique to spatially order and immobilize cellular targets with high precision. However, due to image occlusion during contact, it is challenging to locate the micromanipulator tip for fully automated assembly. To achieve pixel-wise tracking and locating of the tip in contact, a particle filter algorithm integrated with a determined level set model is employed here. The model ensures precise convergence of the micromanipulator’s contour during occlusion. With the converged active contour, the algorithm is able to pixel-wisely separate the micromanipulator from the low-contrast background and precisely locate the tip with error around 1 pixel (2 µm at 4  ×  magnification). As a result, the cell-laden microtube is automatically assembled at six layers/min, which is effective enough to fabricate vessel-mimetic constructs for vascularization in tissue engineering.

  15. Evaluation of cell viability and functionality in vessel-like bioprintable cell-laden tubular channels.

    Science.gov (United States)

    Yu, Yin; Zhang, Yahui; Martin, James A; Ozbolat, Ibrahim T

    2013-09-01

    Organ printing is a novel concept recently introduced in developing artificial three-dimensional organs to bridge the gap between transplantation needs and organ shortage. One of the major challenges is inclusion of blood-vessellike channels between layers to support cell viability, postprinting functionality in terms of nutrient transport, and waste removal. In this research, we developed a novel and effective method to print tubular channels encapsulating cells in alginate to mimic the natural vascular system. An experimental investigation into the influence on cartilage progenitor cell (CPCs) survival, and the function of printing parameters during and after the printing process were presented. CPC functionality was evaluated by checking tissue-specific genetic marker expression and extracellular matrix production. Our results demonstrated the capability of direct fabrication of cell-laden tubular channels by our newly designed coaxial nozzle assembly and revealed that the bioprinting process could induce quantifiable cell death due to changes in dispensing pressure, coaxial nozzle geometry, and biomaterial concentration. Cells were able to recover during incubation, as well as to undergo differentiation with high-level cartilage-associated gene expression. These findings may not only help optimize our system but also can be applied to biomanufacturing of 3D functional cellular tissue engineering constructs for various organ systems.

  16. Cell origami: self-folding of three-dimensional cell-laden microstructures driven by cell traction force.

    Directory of Open Access Journals (Sweden)

    Kaori Kuribayashi-Shigetomi

    Full Text Available This paper describes a method of generating three-dimensional (3D cell-laden microstructures by applying the principle of origami folding technique and cell traction force (CTF. We harness the CTF as a biological driving force to fold the microstructures. Cells stretch and adhere across multiple microplates. Upon detaching the microplates from a substrate, CTF causes the plates to lift and fold according to a prescribed pattern. This self-folding technique using cells is highly biocompatible and does not involve special material requirements for the microplates and hinges to induce folding. We successfully produced various 3D cell-laden microstructures by just changing the geometry of the patterned 2D plates. We also achieved mass-production of the 3D cell-laden microstructures without causing damage to the cells. We believe that our methods will be useful for biotechnology applications that require analysis of cells in 3D configurations and for self-assembly of cell-based micro-medical devices.

  17. Cell Origami: Self-Folding of Three-Dimensional Cell-Laden Microstructures Driven by Cell Traction Force

    Science.gov (United States)

    Kuribayashi-Shigetomi, Kaori; Onoe, Hiroaki; Takeuchi, Shoji

    2012-01-01

    This paper describes a method of generating three-dimensional (3D) cell-laden microstructures by applying the principle of origami folding technique and cell traction force (CTF). We harness the CTF as a biological driving force to fold the microstructures. Cells stretch and adhere across multiple microplates. Upon detaching the microplates from a substrate, CTF causes the plates to lift and fold according to a prescribed pattern. This self-folding technique using cells is highly biocompatible and does not involve special material requirements for the microplates and hinges to induce folding. We successfully produced various 3D cell-laden microstructures by just changing the geometry of the patterned 2D plates. We also achieved mass-production of the 3D cell-laden microstructures without causing damage to the cells. We believe that our methods will be useful for biotechnology applications that require analysis of cells in 3D configurations and for self-assembly of cell-based micro-medical devices. PMID:23251426

  18. Three-dimensional bioprinting is not only about cell-laden structures

    Institute of Scientific and Technical Information of China (English)

    Hong-Bo Zhang; Tian-Long Xing; Rui-Xue Yin; Yong Shi; Shi-Mo Yang; Wen-Jun Zhang

    2016-01-01

    In this review,we focused on a few obstacles that hinder three-dimensional (3D) bioprinting process in tissue engineering.One of the obstacles is the bioinks used to deliver cells.Hydrogels are the most widely used bioink materials;however,they are mechanically weak in nature and cannot meet the requirements for supporting structures,especially when the tissues,such as cartilage,require extracellular matrix to be mechanically strong.Secondly and more importantly,tissue regeneration is not only about building all the components in a way that mimics the structures of living tissues,but also about how to make the constructs function normally in the long term.One of the key issues is sufficient nutrient and oxygen supply to the engineered living constructs.The other is to coordinate the interplays between cells,bioactive agents and extracellular matrix in a natural way.This article reviews the approaches to improve the mechanical strength of hydrogels and their suitability for 3D bioprinting;moreover,the key issues of multiple cell lines coprinting with multiple growth factors,vascularization within engineered living constructs etc.were also reviewed.

  19. An Innovative Collagen-Based Cell-Printing Method for Obtaining Human Adipose Stem Cell-Laden Structures Consisting of Core-Sheath Structures for Tissue Engineering.

    Science.gov (United States)

    Yeo, MyungGu; Lee, Ji-Seon; Chun, Wook; Kim, Geun Hyung

    2016-04-11

    Three-dimensional (3D) cell printing processes have been used widely in various tissue engineering applications due to the efficient embedding of living cells in appropriately designed micro- or macro-structures. However, there are several issues to overcome, such as the limited choice of bioinks and tailor-made fabricating strategies. Here, we suggest a new, innovative cell-printing process, supplemented with a core-sheath nozzle and an aerosol cross-linking method, to obtain multilayered cell-laden mesh structure and a newly considered collagen-based cell-laden bioink. To obtain a mechanically and biologically enhanced cell-laden structure, we used collagen-bioink in the core region, and also used pure alginate in the sheath region to protect the cells in the collagen during the printing and cross-linking process and support the 3D cell-laden mesh structure. To achieve the most appropriate conditions for fabricating cell-embedded cylindrical core-sheath struts, various processing conditions, including weight fractions of the cross-linking agent and pneumatic pressure in the core region, were tested. The fabricated 3D MG63-laden mesh structure showed significantly higher cell viability (92 ± 3%) compared with that (83 ± 4%) of the control, obtained using a general alginate-based cell-printing process. To expand the feasibility to stem cell-embedded structures, we fabricated a cell-laden mesh structure consisting of core (cell-laden collagen)/sheath (pure alginate) using human adipose stem cells (hASCs). Using the selected processing conditions, we could achieve a stable 3D hASC-laden mesh structure. The fabricated cell-laden 3D core-sheath structure exhibited outstanding cell viability (91%) compared to that (83%) of an alginate-based hASC-laden mesh structure (control), and more efficient hepatogenic differentiations (albumin: ∼ 1.7-fold, TDO-2: ∼ 7.6-fold) were observed versus the control. The selection of collagen-bioink and the new printing strategy

  20. Stem cells and injectable hydrogels: Synergistic therapeutics in myocardial repair.

    Science.gov (United States)

    Sepantafar, Mohammadmajid; Maheronnaghsh, Reihan; Mohammadi, Hossein; Rajabi-Zeleti, Sareh; Annabi, Nasim; Aghdami, Nasser; Baharvand, Hossein

    2016-01-01

    One of the major problems in the treatment of cardiovascular diseases is the inability of myocardium to self-regenerate. Current therapies are unable to restore the heart's function after myocardial infarction. Myocardial tissue engineering is potentially a key approach to regenerate damaged heart muscle. Myocardial patches are applied surgically, whereas injectable hydrogels provide effective minimally invasive approaches to recover functional myocardium. These hydrogels are easily administered and can be either cell free or loaded with bioactive agents and/or cardiac stem cells, which may apply paracrine effects. The aim of this review is to investigate the advantages and disadvantages of injectable stem cell-laden hydrogels and highlight their potential applications for myocardium repair.

  1. Evaluation of photocrosslinked Lutrol hydrogel for tissue printing applications.

    Science.gov (United States)

    Fedorovich, Natalja E; Swennen, Ives; Girones, Jordi; Moroni, Lorenzo; van Blitterswijk, Clemens A; Schacht, Etienne; Alblas, Jacqueline; Dhert, Wouter J A

    2009-07-13

    Application of hydrogels in tissue engineering and innovative strategies such as organ printing, which is based on layered 3D deposition of cell-laden hydrogels, requires design of novel hydrogel matrices. Hydrogel demands for 3D printing include: 1) preservation of the printed shape after the deposition; 2) maintaining cell viability and cell function and 3) easy handling of the printed construct. In this study we analyze the applicability of a novel, photosensitive hydrogel (Lutrol) for printing of 3D structured bone grafts. We benefit from the fast temperature-responsive gelation ability of thermosensitive Lutrol-F127, ensuring organized 3D extrusion, and the additional stability provided by covalent photocrosslinking allows handling of the printed scaffolds. We studied the cytotoxicity of the hydrogel and osteogenic differentiation of embedded osteogenic progenitor cells. After photopolymerization of the modified Lutrol hydrogel, cells remain viable for up to three weeks and retain the ability to differentiate. Encapsulation of cells does not compromise the mechanical properties of the formed gels and multilayered porous Lutrol structures were successfully printed.

  2. Enzymatic regulation of functional vascular networks using gelatin hydrogels.

    Science.gov (United States)

    Chuang, Chia-Hui; Lin, Ruei-Zeng; Tien, Han-Wen; Chu, Ya-Chun; Li, Yen-Cheng; Melero-Martin, Juan M; Chen, Ying-Chieh

    2015-06-01

    To manufacture tissue engineering-based functional tissues, scaffold materials that can be sufficiently vascularized to mimic the functionality and complexity of native tissues are needed. Currently, vascular network bioengineering is largely carried out using natural hydrogels as embedding scaffolds, but most natural hydrogels have poor mechanical stability and durability, factors that critically limit their widespread use. In this study, we examined the suitability of gelatin-phenolic hydroxyl (gelatin-Ph) hydrogels that can be enzymatically crosslinked, allowing tuning of the storage modulus and the proteolytic degradation rate, for use as injectable hydrogels to support the human progenitor cell-based formation of a stable and mature vascular network. Porcine gelatin-Ph hydrogels were found to be cytocompatible with human blood-derived endothelial colony-forming cells and white adipose tissue-derived mesenchymal stem cells, resulting in >87% viability, and cell proliferation and spreading could be modulated by using hydrogels with different proteolytic degradability and stiffness. In addition, gelatin was extracted from mouse dermis and murine gelatin-Ph hydrogels were prepared. Importantly, implantation of human cell-laden porcine or murine gelatin-Ph hydrogels into immunodeficient mice resulted in the rapid formation of functional anastomoses between the bioengineered human vascular network and the mouse vasculature. Furthermore, the degree of enzymatic crosslinking of the gelatin-Ph hydrogels could be used to modulate cell behavior and the extent of vascular network formation in vivo. Our report details a technique for the synthesis of gelatin-Ph hydrogels from allogeneic or xenogeneic dermal skin and suggests that these hydrogels can be used for biomedical applications that require the formation of microvascular networks, including the development of complex engineered tissues.

  3. Control of β-carotene bioaccessibility using starch-based filled hydrogels.

    Science.gov (United States)

    Mun, Saehun; Kim, Yong-Ro; McClements, David Julian

    2015-04-15

    β-Carotene was incorporated into three types of delivery system: (i) "emulsions": protein-coated fat droplets dispersed in water; (ii) "hydrogels": rice starch gels; and (iii) "filled hydrogels": protein-coated fat droplets dispersed in rice starch gels. Fat droplets in filled hydrogels were stable in simulated mouth and stomach conditions, but aggregated under small intestinal conditions. Fat droplets in emulsions aggregated under oral, gastric, and intestinal conditions. β-Carotene bioaccessibility was higher when encapsulated in filled hydrogels than in emulsions or hydrogels, which was attributed to increased aggregation stability of the fat droplets leading to a larger exposed lipid surface area. β-Carotene bioaccessibility in starch hydrogels containing no fat was very low (≈1%) due to its crystalline nature and lack of mixed micelles to solubilise it. The information presented may be useful for the design of rice-starch based gel products fortified with lipophilic nutraceuticals.

  4. Connections matter: channeled hydrogels to improve vascularization

    Directory of Open Access Journals (Sweden)

    Severin eMuehleder

    2014-11-01

    Full Text Available The use of cell-laden hydrogels to engineer soft tissue has been emerging within the past years. Despite several newly developed and sophisticated techniques to encapsulate different cell types the importance of vascularization of the engineered constructs is often underestimated. As a result, cell death within a construct leads to impaired function and inclusion of the implant. Here, we discuss the fabrication of hollow channels within hydrogels as a promising strategy to facilitate vascularization. Furthermore, we present an overview on the feasible use of removable spacers, 3D laser- and planar processing strategies to create channels within hydrogels. The implementation of these structures promotes control over cell distribution and increases oxygen transport and nutrient supply in vitro. However, many studies lack the use of endothelial cells in their approaches leaving out an important factor to enhance vessel ingrowth and anastomosis formation upon implantation. In addition, the adequate endothelial cell type needs to be considered to make these approaches bridge the gap to in vivo applications.

  5. Hydrogel films and coatings by swelling-induced gelation.

    Science.gov (United States)

    Moreau, David; Chauvet, Caroline; Etienne, François; Rannou, François P; Corté, Laurent

    2016-11-22

    Hydrogel films used as membranes or coatings are essential components of devices interfaced with biological systems. Their design is greatly challenged by the need to find mild synthesis and processing conditions that preserve their biocompatibility and the integrity of encapsulated compounds. Here, we report an approach to produce hydrogel films spontaneously in aqueous polymer solutions. This method uses the solvent depletion created at the surface of swelling polymer substrates to induce the gelation of a thin layer of polymer solution. Using a biocompatible polymer that self-assembles at high concentration [poly(vinyl alcohol)], hydrogel films were produced within minutes to hours with thicknesses ranging from tens to hundreds of micrometers. A simple model and numerical simulations of mass transport during swelling capture the experiments and predict how film growth depends on the solution composition, substrate geometry, and swelling properties. The versatility of the approach was verified with a variety of swelling substrates and hydrogel-forming solutions. We also demonstrate the potential of this technique by incorporating other solutes such as inorganic particles to fabricate ceramic-hydrogel coatings for bone anchoring and cells to fabricate cell-laden membranes for cell culture or tissue engineering.

  6. Spontaneous transfer of droplets across microfluidic laminar interfaces.

    Science.gov (United States)

    Deng, Nan-Nan; Wang, Wei; Ju, Xiao-Jie; Xie, Rui; Chu, Liang-Yin

    2016-11-01

    The precise manipulation of droplets in microfluidics has revolutionized a myriad of drop-based technologies, such as multiple emulsion preparation, drop fusion, drop fission, drop trapping and drop sorting, which offer promising new opportunities in chemical and biological fields. In this paper, we present an interfacial-tension-directed strategy for the migration of droplets across liquid-liquid laminar streams. By carefully controlling the interfacial energies, droplets of phase A are able to pass across the laminar interfaces of two immiscible fluids from phase B to phase C due to a positive spreading coefficient of phase C over phase B. To demonstrate this, we successfully perform the transfer of water droplets across an oil-oil laminar interface and the transfer of oil droplets across an oil-water laminar interface. The whole transfer process is spontaneous and only takes about 50 ms. We find that the fluid dynamics have an impact on the transfer processes. Only if the flowrate ratios are well matched will the droplets pass through the laminar interface successfully. This interfacial-tension-directed transfer of droplets provides a versatile procedure to make new structures and control microreactions as exemplified by the fabrication of giant unilamellar vesicles and cell-laden microgels.

  7. Assembly of cell-laden hydrogel fiber into non-liquefied and liquefied 3D spiral constructs by perfusion-based layer-by-layer technique.

    Science.gov (United States)

    Sher, Praveen; Oliveira, Sara M; Borges, João; Mano, João F

    2015-01-06

    In this work, three-dimensional (3D) self-sustaining, spiral-shaped constructs were produced through a combination of ionotropic gelation, to form cell-encapsulated alginate fibers, and a perfusion-based layer-by-layer (LbL) technique. Single fibers were assembled over cylindrical molds by reeling to form spiral shapes, both having different geometries and sizes. An uninterrupted nanometric multilayer coating produced by a perfusion-based LbL technique, using alginate and chitosan, generated stable 3D spiral-shaped macrostructures by gripping and affixing the threads together without using any crosslinking/binding agent. The chelation process altered the internal microenvironment of the 3D construct from the solid to the liquefied state while preserving the external geometry. L929 cell viability by MTS and dsDNA quantification favor liquefied 3D constructs more than non-liquefied ones. The proposed technique setup helps us to generate complex polyelectrolyte-based 3D constructs for tissue engineering applications and organ printing.

  8. Hydrogel based occlusion systems

    OpenAIRE

    Stam, F.A.; Jackson, N.; Dubruel, P.; Adesanya, K.; Embrechts, A; Mendes, E.; Neves, H.P.; Herijgers, P; Verbrugghe, Y.; Shacham, Y.; Engel, L.; Krylov, V

    2013-01-01

    A hydrogel based occlusion system, a method for occluding vessels, appendages or aneurysms, and a method for hydrogel synthesis are disclosed. The hydrogel based occlusion system includes a hydrogel having a shrunken and a swollen state and a delivery tool configured to deliver the hydrogel to a target occlusion location. The hydrogel is configured to permanently occlude the target occlusion location in the swollen state. The hydrogel may be an electro-activated hydrogel (EAH) which could be ...

  9. Dancing Droplets

    Science.gov (United States)

    Cira, Nate; Prakash, Manu

    2013-11-01

    Inspired by the observation of intricate and beautifully dynamic patterns generated by food coloring on corona treated glass slides, we have investigated the behavior of propylene glycol and water droplets on clean glass surfaces. These droplets exhibit a range of interesting behaviors including long distance attraction or repulsion, and chasing/fleeing upon contact. We present explanations for each of these behaviors, and propose a detailed model for the long distance interactions based on vapor facilitated coupling. Finally we use our understanding to create several novel devices which: passively sort droplets by surface tension, spontaneously align droplets, drive droplets in circles, and cause droplets to bounce on a vertical surface. The simplicity of this system lends it particularly well to application as a toy model for physical systems with force fields and biological systems such as chemotaxis and motility.

  10. Swimming Droplets

    Science.gov (United States)

    Maass, Corinna C.; Krüger, Carsten; Herminghaus, Stephan; Bahr, Christian

    2016-03-01

    Swimming droplets are artificial microswimmers based on liquid droplets that show self-propelled motion when immersed in a second liquid. These systems are of tremendous interest as experimental models for the study of collective dynamics far from thermal equilibrium. For biological systems, such as bacterial colonies, plankton, or fish swarms, swimming droplets can provide a vital link between simulations and real life. We review the experimental systems and discuss the mechanisms of self-propulsion. Most systems are based on surfactant-stabilized droplets, the surfactant layer of which is modified in a way that leads to a steady Marangoni stress resulting in an autonomous motion of the droplet. The modification of the surfactant layer is caused either by the advection of a chemical reactant or by a solubilization process. Some types of swimming droplets possess a very simple design and long active periods, rendering them promising model systems for future studies of collective behavior.

  11. Fabrication of viable centimeter-sized 3D tissue constructs with microchannel conduits for improved tissue properties through assembly of cell-laden microbeads.

    Science.gov (United States)

    Luo, Houyong; Chen, Maiqin; Wang, Xiu; Mei, Yang; Ye, Zhaoyang; Zhou, Yan; Tan, Wen-Song

    2014-06-01

    Bottom-up approaches have emerged as a new philosophy in tissue engineering, enabling precise control over tissue morphogenesis at the cellular level. We previously prepared large bone-like tissues using cell-laden microbeads (microtissues) by following a modular approach to ensure cell viability. However, a long-term culture of such avascular macroscopic tissues (macrotissues) has not been evaluated. In the present study, microtissues were fabricated by cultivating human fibroblasts on Cytopore-2 microbeads in spinner flasks for 16 days. We then examined the long-term perfusion culture for macrotissues. Specifically, following assembly in a perfusion chamber for 15 days, cell death was found to be prominent at a depth of 500 µm from the surface of macrotissues towards the interior, suggesting that there was a new mass transfer limit leading to cell death instead of tissue maturation. Subsequently, we developed a strategy by incorporating microchannel structures in centimeter-sized tissue constructs to promote mass transport. By installing glass rods (1 mm diameter, 1 mm wall-to-wall spacing) in the perfusion chamber, stable microchannel architectures were introduced during the microtissue assembly process. Based on live/dead assay and scanning electron microscopy (SEM), these channelled macrotissues (length × diameter, 1.6 × 2.0 cm) demonstrated high cell viability and compact packing of microbeads. Comparative biochemical analysis further suggested a more homogeneous spatial distribution of cells and extracellular matrix (ECM) in the channelled macrotissues than in solid ones. Viable 3D large tissues can therefore be prepared by assembling cell-laden microbeads in conjunction with microchannel carving, meeting clinical needs in tissue repair.

  12. Characterization of novel photocrosslinked carboxymethylcellulose hydrogels for encapsulation of nucleus pulposus cells.

    Science.gov (United States)

    Reza, Anna T; Nicoll, Steven B

    2010-01-01

    Back pain is a significant clinical concern often associated with degeneration of the intervertebral disc (IVD). Tissue engineering strategies may provide a viable IVD replacement therapy; however, an ideal biomaterial scaffold has yet to be identified. One candidate material is carboxymethylcellulose (CMC), a water-soluble derivative of cellulose. In this study, 90 and 250 kDa CMC polymers were modified with functional methacrylate groups and photocrosslinked to produce hydrogels at different macromer concentrations. At 7 days, bovine nucleus pulposus (NP) cells encapsulated in these hydrogels were viable, with values for the elastic modulus ranging from 1.07 + or - 0.06 to 4.29 + or - 1.25 kPa. Three specific formulations were chosen for further study based on cell viability and mechanical integrity assessments: 4% 90 kDa, 2% 250 kDa and 3% 250 kDa CMC. The equilibrium weight swelling ratio of these formulations remained steady throughout the 2 week study (46.45 + or - 3.14, 48.55 + or - 2.91 and 42.41 + or - 3.06, respectively). The equilibrium Young's modulus of all cell-laden and cell-free control samples decreased over time, with the exception of cell-laden 3% 250 kDa CMC constructs, indicating an interplay between limited hydrolysis of interchain crosslinks and the elaboration of a functional matrix. Histological analyses of 3% 250 kDa CMC hydrogels confirmed the presence of rounded cells in lacunae and the pericellular deposition of chondroitin sulfate proteoglycan, a phenotypic NP marker. Taken together, these studies support the use of photocrosslinked CMC hydrogels as tunable biomaterials for NP cell encapsulation.

  13. Black Droplets

    CERN Document Server

    Santos, Jorge E

    2014-01-01

    Black droplets and black funnels are gravitational duals to states of a large N, strongly coupled CFT on a fixed black hole background. We numerically construct black droplets corresponding to a CFT on a Schwarzchild background with finite asymptotic temperature. We find two branches of such droplet solutions which meet at a turning point. Our results suggest that the equilibrium black droplet solution does not exist, which would imply that the Hartle-Hawking state in this system is dual to the black funnel constructed in \\cite{Santos:2012he}. We also compute the holographic stress energy tensor and match its asymptotic behaviour to perturbation theory.

  14. 3D bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels.

    Science.gov (United States)

    Duan, Bin; Hockaday, Laura A; Kang, Kevin H; Butcher, Jonathan T

    2013-05-01

    Heart valve disease is a serious and growing public health problem for which prosthetic replacement is most commonly indicated. Current prosthetic devices are inadequate for younger adults and growing children. Tissue engineered living aortic valve conduits have potential for remodeling, regeneration, and growth, but fabricating natural anatomical complexity with cellular heterogeneity remain challenging. In the current study, we implement 3D bioprinting to fabricate living alginate/gelatin hydrogel valve conduits with anatomical architecture and direct incorporation of dual cell types in a regionally constrained manner. Encapsulated aortic root sinus smooth muscle cells (SMC) and aortic valve leaflet interstitial cells (VIC) were viable within alginate/gelatin hydrogel discs over 7 days in culture. Acellular 3D printed hydrogels exhibited reduced modulus, ultimate strength, and peak strain reducing slightly over 7-day culture, while the tensile biomechanics of cell-laden hydrogels were maintained. Aortic valve conduits were successfully bioprinted with direct encapsulation of SMC in the valve root and VIC in the leaflets. Both cell types were viable (81.4 ± 3.4% for SMC and 83.2 ± 4.0% for VIC) within 3D printed tissues. Encapsulated SMC expressed elevated alpha-smooth muscle actin, while VIC expressed elevated vimentin. These results demonstrate that anatomically complex, heterogeneously encapsulated aortic valve hydrogel conduits can be fabricated with 3D bioprinting.

  15. Dancing Droplets

    CERN Document Server

    Cira, Nate J

    2013-01-01

    Inspired by the observation of intricate and beautifully dynamic patterns generated by food coloring on clean glass slides, we have investigated the behavior of propylene glycol and water droplets on high energy surfaces. In this fluid dynamics video we show a range of interesting behaviors including long distance attraction, and chasing/fleeing upon contact. We present explanations for each of these behaviors including a mechanism for the long distance interactions based on vapor facilitated coupling. Finally we use our understanding to create several novel devices which: spontaneously align droplets, drive droplets in circles, cause droplets to bounce on a vertical surface, and passively sort droplets by surface tension. The simplicity of this system lends it particularly well to application as a toy model for physical systems with force fields and biological systems such as chemotaxis and motility.

  16. Three-dimensional bioprinting of cell-laden constructs with polycaprolactone protective layers for using various thermoplastic polymers.

    Science.gov (United States)

    Kim, Byoung Soo; Jang, Jinah; Chae, Suhun; Gao, Ge; Kong, Jeong-Sik; Ahn, Minjun; Cho, Dong-Woo

    2016-08-22

    Three-dimensional (3D) cell-printed constructs have been recognized as promising biological substitutes for tissue/organ regeneration. They provide tailored physical properties and biological cues via multi-material printing process. In particular, hybrid bioprinting, enabling to use biodegradable synthetic polymers as framework, has been an attractive method to support weak hydrogels. The constructs with controlled architecture and high shape fidelity were fabricated through this method, depositing spatial arrangement of multi-cell types into microscale constructs. Among biodegradable synthetic polymers, polycaprolactone (PCL) has been commonly chosen in fabrication of cell-printed constructs because of its low melting temperature of 60 °C to be dispensed with extrusion-based bioprinting system. However, in addition to PCL, various synthetic polymers have been widely applied for tissue regeneration. These polymers have distinctive characteristics essential for tissue/organ regeneration. Nevertheless, it is difficult to use some polymers, such as poly (lactic-co-glycolic acid) (PLGA) and polylactic acid (PLA) with 3D bioprinting technology because of their high melting temperature to be dispensed, which can result in thermal damage to the cells in the printed constructs during the fabrication process. We present a novel bioprinting method to use various synthetic polymers in fabrication of cell-printed constructs. PCL was introduced as a protective layer to prevent thermal damage caused by high temperature of polymers during fabrication. Remarkable improvement in cellular activities in the printed constructs with PCL layers was observed compared with the construct without PCL. This bioprinting method can be applied to fabricate more tissue-like constructs through the use of various biomaterials.

  17. PRAGMATIC HYDROGELS

    Directory of Open Access Journals (Sweden)

    Patil S.A.

    2011-03-01

    Full Text Available Man has always been plagued with many ailments and diseases. The field of pharmaceutical science has today become more invaluable in helping to keep us healthy and prevent disease. The availability of large molecular weight protein and peptide-based drugs due to the recent advances has given us a new ways to treat a number of diseases. I wish to present new and promising techniques for the production of drug and protein delivery formulations that have been developed that is Hydrogel. These are presently under investigation as a delivery system for bioactive molecules as having similar physical properties as that of living tissue, which is due to their high water content, soft and rubbery consistency and low interfacial tension with water and biological fluids. Hydrogels are three-dimensional, hydrophilic, polymeric networks capable of imbibing large amounts of water or biological fluids. The networks are composed of homopolymers or copolymers, and are insoluble due to the presence of chemical crosslink (tie-points, junctions or physical crosslink, such as entanglements or crystallite. The latter provide the network structure and physical integrity. These hydrogels exhibit a thermodynamic compatibility with water which allows them to swell in aqueous media. The nature of the degradation product can be tailored by a rational and proper selection of building blocks. The soft and rubbery nature of hydrogels minimizes irritation to surrounding tissues. In general, hydrogels possess good biocompatibility and biodegradability.

  18. Droplets Acoustics

    CERN Document Server

    Dahan, Raphael; Carmon, Tal

    2015-01-01

    Contrary to their capillary resonances (Rayleigh, 1879) and their optical resonances (Ashkin, 1977), droplets acoustical resonances were rarely considered. Here we experimentally excite, for the first time, the acoustical resonances of a droplet that relies on sound instead of capillary waves. Droplets vibrations at 37 MHz rates and 100 quality factor are optically excited and interrogated at an optical threshold of 68 microWatt. Our vibrations span a spectral band that is 1000 times higher when compared with drops previously-studied capillary vibration.

  19. Hydrogel based occlusion systems

    NARCIS (Netherlands)

    Stam, F.A.; Jackson, N.; Dubruel, P.; Adesanya, K.; Embrechts, A.; Mendes, E.; Neves, H.P.; Herijgers, P.; Verbrugghe, Y.; Shacham, Y.; Engel, L.; Krylov, V.

    2013-01-01

    A hydrogel based occlusion system, a method for occluding vessels, appendages or aneurysms, and a method for hydrogel synthesis are disclosed. The hydrogel based occlusion system includes a hydrogel having a shrunken and a swollen state and a delivery tool configured to deliver the hydrogel to a tar

  20. Bioresponsive hydrogels

    Directory of Open Access Journals (Sweden)

    Rein V. Ulijn

    2007-04-01

    Full Text Available We highlight recent developments in hydrogel materials with biological responsiveness built in. These ‘smart’ biomaterials change properties in response to selective biological recognition events. When exposed to a biological target (nutrient, growth factor, receptor, antibody, enzyme, or whole cell, molecular recognition events trigger changes in molecular interactions that translate into macroscopic responses, such as swelling/collapse or solution-to-gel transitions. The hydrogel transitions may be used directly as optical readouts for biosensing, linked to the release of actives for drug delivery, or instigate biochemical signaling events that control or direct cellular behavior. Accordingly, bioresponsive hydrogels have gained significant interest for application in diagnostics, drug delivery, and tissue regeneration/wound healing.

  1. Mechanically reinforced cell-laden scaffolds formed using alginate-based bioink printed onto the surface of a PCL/alginate mesh structure for regeneration of hard tissue.

    Science.gov (United States)

    Kim, Yong Bok; Lee, Hyeongjin; Yang, Gi-Hoon; Choi, Chang Hyun; Lee, DaeWeon; Hwang, Heon; Jung, Won-Kyo; Yoon, Hyeon; Kim, Geun Hyung

    2016-01-01

    Cell-printing technology has provided a new paradigm for biofabrication, with potential to overcome several shortcomings of conventional scaffold-based tissue regeneration strategies via controlled delivery of various cell types in well-defined target regions. Here we describe a cell-printing method to obtain mechanically reinforced multi-layered cell-embedded scaffolds, formed of micron-scale poly(ε-caprolactone) (PCL)/alginate struts coated with alginate-based bioink. To compare the physical and cellular activities, we used a scaffold composed of pure alginate (without cells) coated PCL/alginate struts as a control. We systematically varied the ratio of alginate cross-linking agent, and determined the optimal cell-coating conditions to form the PCL/alginate struts. Following fabrication of the cell (MG63)-laden PCL/alginate scaffold, the bioactivity was evaluated in vitro. The laden cells exhibited a substantially more developed cytoskeleton compared with those on a control scaffold consisting of the same material composition. Based on these results, the printed cells exhibited a significantly more homogenous distribution within the scaffold compared with the control. Cell proliferation was determined via MTT assays at 1, 3, 7, and 14 days of culture, and the proliferation of the cell-printed scaffold was substantially in excess (∼2.4-fold) of that on the control. Furthermore, the osteogenic activity such as ALP was measured, and the cell-laden scaffold exhibited significantly greater activity (∼3.2-fold) compared with the control scaffold.

  2. Capillary Origami Inspired Fabrication of Complex 3D Hydrogel Constructs.

    Science.gov (United States)

    Li, Moxiao; Yang, Qingzhen; Liu, Hao; Qiu, Mushu; Lu, Tian Jian; Xu, Feng

    2016-09-01

    Hydrogels have found broad applications in various engineering and biomedical fields, where the shape and size of hydrogels can profoundly influence their functions. Although numerous methods have been developed to tailor 3D hydrogel structures, it is still challenging to fabricate complex 3D hydrogel constructs. Inspired by the capillary origami phenomenon where surface tension of a droplet on an elastic membrane can induce spontaneous folding of the membrane into 3D structures along with droplet evaporation, a facile strategy is established for the fabrication of complex 3D hydrogel constructs with programmable shapes and sizes by crosslinking hydrogels during the folding process. A mathematical model is further proposed to predict the temporal structure evolution of the folded 3D hydrogel constructs. Using this model, precise control is achieved over the 3D shapes (e.g., pyramid, pentahedron, and cube) and sizes (ranging from hundreds of micrometers to millimeters) through tuning membrane shape, dimensionless parameter of the process (elastocapillary number Ce ), and evaporation time. This work would be favorable to multiple areas, such as flexible electronics, tissue regeneration, and drug delivery.

  3. Droplet organelles?

    Science.gov (United States)

    Courchaine, Edward M; Lu, Alice; Neugebauer, Karla M

    2016-08-01

    Cells contain numerous, molecularly distinct cellular compartments that are not enclosed by lipid bilayers. These compartments are implicated in a wide range of cellular activities, and they have been variously described as bodies, granules, or organelles. Recent evidence suggests that a liquid-liquid phase separation (LLPS) process may drive their formation, possibly justifying the unifying term "droplet organelle". A veritable deluge of recent publications points to the importance of low-complexity proteins and RNA in determining the physical properties of phase-separated structures. Many of the proteins linked to such structures are implicated in human diseases, such as amyotrophic lateral sclerosis (ALS). We provide an overview of the organizational principles that characterize putative "droplet organelles" in healthy and diseased cells, connecting protein biochemistry with cell physiology.

  4. Dynamic three-dimensional micropatterned cell co-cultures within photocurable and chemically degradable hydrogels.

    Science.gov (United States)

    Sugiura, Shinji; Cha, Jae Min; Yanagawa, Fumiki; Zorlutuna, Pinar; Bae, Hojae; Khademhosseini, Ali

    2016-08-01

    In this paper we report on the development of dynamically controlled three-dimensional (3D) micropatterned cellular co-cultures within photocurable and chemically degradable hydrogels. Specifically, we generated dynamic co-cultures of micropatterned murine embryonic stem (mES) cells with human hepatocellular carcinoma (HepG2) cells within 3D hydrogels. HepG2 cells were used due to their ability to direct the differentiation of mES cells through secreted paracrine factors. To generate dynamic co-cultures, mES cells were first encapsulated within micropatterned photocurable poly(ethylene glycol) (PEG) hydrogels. These micropatterned cell-laden PEG hydrogels were subsequently surrounded by calcium alginate (Ca-Alg) hydrogels containing HepG2 cells. After 4 days, the co-culture step was halted by exposing the system to sodium citrate solution, which removed the alginate gels and the encapsulated HepG2 cells. The encapsulated mES cells were then maintained in the resulting cultures for 16 days and cardiac differentiation was analysed. We observed that the mES cells that were exposed to HepG2 cells in the co-cultures generated cells with higher expression of cardiac genes and proteins, as well as increased spontaneous beating. Due to its ability to control the 3D microenvironment of cells in a spatially and temporally regulated manner, the method presented in this study is useful for a range of cell-culture applications related to tissue engineering and regenerative medicine. Copyright © 2013 John Wiley & Sons, Ltd.

  5. Structure of Block Copolymer Hydrogel Formed by Complex Coacervate Process

    Science.gov (United States)

    Choi, Soohyung; Ortony, Julia; Krogstad, Daniel; Spruell, Jason; Lynd, Nathaniel; Han, Songi; Kramer, Edward

    2012-02-01

    Complex coacervation occurs when oppositely charged polyelectrolytes associate in solution, forming dense micron-sized droplets. Hydrogels with coacervate block domains were formed by mixing two ABA and A'BA' triblock copolymer solutions in water where the A and A' blocks are oppositely charged. Small-angle neutron scattering (SANS) was used to investigate the structure of hydrogels formed by ABA triblock copolymers (A block: poly(allyl glycidyl ether) functionalized with guanidinium (A) or sulfonate (A'), B block: poly(ethylene oxide)). By using an appropriate fitting model, structural information such as coacervate core block radius and water volume fraction w can be extracted from SANS data. The results reveal that w in the coacervate core block was significantly higher than in conventional triblock copolymer hydrogels where microphase separation is driven by the hydrophobicity of the core-forming blocks.

  6. Biocompatible Hydrogels for Microarray Cell Printing and Encapsulation

    Directory of Open Access Journals (Sweden)

    Akshata Datar

    2015-10-01

    Full Text Available Conventional drug screening processes are a time-consuming and expensive endeavor, but highly rewarding when they are successful. To identify promising lead compounds, millions of compounds are traditionally screened against therapeutic targets on human cells grown on the surface of 96-wells. These two-dimensional (2D cell monolayers are physiologically irrelevant, thus, often providing false-positive or false-negative results, when compared to cells grown in three-dimensional (3D structures such as hydrogel droplets. However, 3D cell culture systems are not easily amenable to high-throughput screening (HTS, thus inherently low throughput, and requiring relatively large volume for cell-based assays. In addition, it is difficult to control cellular microenvironments and hard to obtain reliable cell images due to focus position and transparency issues. To overcome these problems, miniaturized 3D cell cultures in hydrogels were developed via cell printing techniques where cell spots in hydrogels can be arrayed on the surface of glass slides or plastic chips by microarray spotters and cultured in growth media to form cells encapsulated 3D droplets for various cell-based assays. These approaches can dramatically reduce assay volume, provide accurate control over cellular microenvironments, and allow us to obtain clear 3D cell images for high-content imaging (HCI. In this review, several hydrogels that are compatible to microarray printing robots are discussed for miniaturized 3D cell cultures.

  7. Hydrogels Constructed from Engineered Proteins.

    Science.gov (United States)

    Li, Hongbin; Kong, Na; Laver, Bryce; Liu, Junqiu

    2016-02-24

    Due to their various potential biomedical applications, hydrogels based on engineered proteins have attracted considerable interest. Benefitting from significant progress in recombinant DNA technology and protein engineering/design techniques, the field of protein hydrogels has made amazing progress. The latest progress of hydrogels constructed from engineered recombinant proteins are presented, mainly focused on biorecognition-driven physical hydrogels as well as chemically crosslinked hydrogels. The various bio-recognition based physical crosslinking strategies are discussed, as well as chemical crosslinking chemistries used to engineer protein hydrogels, and protein hydrogels' various biomedical applications. The future perspectives of this fast evolving field of biomaterials are also discussed.

  8. 3D Cell Culture in Alginate Hydrogels

    Directory of Open Access Journals (Sweden)

    Therese Andersen

    2015-03-01

    Full Text Available This review compiles information regarding the use of alginate, and in particular alginate hydrogels, in culturing cells in 3D. Knowledge of alginate chemical structure and functionality are shown to be important parameters in design of alginate-based matrices for cell culture. Gel elasticity as well as hydrogel stability can be impacted by the type of alginate used, its concentration, the choice of gelation technique (ionic or covalent, and divalent cation chosen as the gel inducing ion. The use of peptide-coupled alginate can control cell–matrix interactions. Gelation of alginate with concomitant immobilization of cells can take various forms. Droplets or beads have been utilized since the 1980s for immobilizing cells. Newer matrices such as macroporous scaffolds are now entering the 3D cell culture product market. Finally, delayed gelling, injectable, alginate systems show utility in the translation of in vitro cell culture to in vivo tissue engineering applications. Alginate has a history and a future in 3D cell culture. Historically, cells were encapsulated in alginate droplets cross-linked with calcium for the development of artificial organs. Now, several commercial products based on alginate are being used as 3D cell culture systems that also demonstrate the possibility of replacing or regenerating tissue.

  9. Dynamics of droplets

    Energy Technology Data Exchange (ETDEWEB)

    Frohn, A.; Roth, N. [Stuttgart Univ. (Germany). Inst. fuer Thermodynamik der Luft- und Raumfahrt

    2000-07-01

    Intended to privide an up-to-date overview of the field, this book is also likely to become a standard work of reference on the science of droplets. Beginning with the theoretical background important for droplet dynamics, it continues with a presentation of the various methods for generating single droplets and regular droplet systems. Also included is a detailed description of the experimental methods employed in droplet research. A special chapter is devoted to the various types of droplet interactions without phase transition. A separate chapter then treats many examples of the possible phase transition processes. The final part of the book gives a summary of important applications. With its comprehensive content, this book will be of interest to all scientists and lecturers concerned with two-phase flow, spray technology, heterogeneous combustion, and aerosol science. (orig.)

  10. A droplet-based building block approach for bladder smooth muscle cell (SMC) proliferation.

    Science.gov (United States)

    Xu, F; Moon, S J; Emre, A E; Turali, E S; Song, Y S; Hacking, S A; Nagatomi, J; Demirci, U

    2010-03-01

    Tissue engineering based on building blocks is an emerging method to fabricate 3D tissue constructs. This method requires depositing and assembling building blocks (cell-laden microgels) at high throughput. The current technologies (e.g., molding and photolithography) to fabricate microgels have throughput challenges and provide limited control over building block properties (e.g., cell density). The cell-encapsulating droplet generation technique has potential to address these challenges. In this study, we monitored individual building blocks for viability, proliferation and cell density. The results showed that (i) SMCs can be encapsulated in collagen droplets with high viability (>94.2 +/- 3.2%) for four cases of initial number of cells per building block (i.e. 7 +/- 2, 16 +/- 2, 26 +/- 3 and 37 +/- 3 cells/building block). (ii) Encapsulated SMCs can proliferate in building blocks at rates that are consistent (1.49 +/- 0.29) across all four cases, compared to that of the controls. (iii) By assembling these building blocks, we created an SMC patch (5 mm x 5 mm x 20 microm), which was cultured for 51 days forming a 3D tissue-like construct. The histology of the cultured patch was compared to that of a native rat bladder. These results indicate the potential of creating 3D tissue models at high throughput in vitro using building blocks.

  11. Cell-laden poly(ɛ-caprolactone)/alginate hybrid scaffolds fabricated by an aerosol cross-linking process for obtaining homogeneous cell distribution: fabrication, seeding efficiency, and cell proliferation and distribution.

    Science.gov (United States)

    Lee, HyeongJin; Ahn, SeungHyun; Bonassar, Lawrence J; Chun, Wook; Kim, GeunHyung

    2013-10-01

    Generally, solid-freeform fabricated scaffolds show a controllable pore structure (pore size, porosity, pore connectivity, and permeability) and mechanical properties by using computer-aided techniques. Although the scaffolds can provide repeated and appropriate pore structures for tissue regeneration, they have a low biological activity, such as low cell-seeding efficiency and nonuniform cell density in the scaffold interior after a long culture period, due to a large pore size and completely open pores. Here we fabricated three different poly(ɛ-caprolactone) (PCL)/alginate scaffolds: (1) a rapid prototyped porous PCL scaffold coated with an alginate, (2) the same PCL scaffold coated with a mixture of alginate and cells, and (3) a multidispensed hybrid PCL/alginate scaffold embedded with cell-laden alginate struts. The three scaffolds had similar micropore structures (pore size = 430-580 μm, porosity = 62%-68%, square pore shape). Preosteoblast cells (MC3T3-E1) were used at the same cell density in each scaffold. By measuring cell-seeding efficiency, cell viability, and cell distribution after various periods of culturing, we sought to determine which scaffold was more appropriate for homogeneously regenerated tissues.

  12. Levitated droplet dye laser

    DEFF Research Database (Denmark)

    Azzouz, H.; Alkafadiji, L.; Balslev, Søren

    2006-01-01

    a high quality optical resonator. Our 750 nL lasing droplets consist of Rhodamine 6G dissolved in ethylene glycol, at a concentration of 0.02 M. The droplets are optically pumped at 532 nm light from a pulsed, frequency doubled Nd:YAG laser, and the dye laser emission is analyzed by a fixed grating...

  13. Droplet collisions in turbulence

    NARCIS (Netherlands)

    Oldenziel, G.

    2014-01-01

    Liquid droplets occur in many natural phenomena and play an important role in a large number of industrial applications. One of the distinct properties of droplets as opposed to solid particles is their ability to merge, or coalesce upon collision. Coalescence of liquid drops is of importance in for

  14. Self-propelled droplets

    Science.gov (United States)

    Seemann, Ralf; Fleury, Jean-Baptiste; Maass, Corinna C.

    2016-11-01

    Self-propelled droplets are a special kind of self-propelled matter that are easily fabricated by standard microfluidic tools and locomote for a certain time without external sources of energy. The typical driving mechanism is a Marangoni flow due to gradients in the interfacial energy on the droplet interface. In this article we review the hydrodynamic prerequisites for self-sustained locomotion and present two examples to realize those conditions for emulsion droplets, i.e. droplets stabilized by a surfactant layer in a surrounding immiscible liquid. One possibility to achieve self-propelled motion relies on chemical reactions affecting the surface active properties of the surfactant molecules. The other relies on micellar solubilization of the droplet phase into the surrounding liquid phase. Remarkable cruising ranges can be achieved in both cases and the relative insensitivity to their own `exhausts' allows to additionally study collective phenomena.

  15. Template-synthesized opal hydrogels

    Institute of Scientific and Technical Information of China (English)

    LI Jun; JI Lijun; RONG Jianhua; YANG Zhenzhong

    2003-01-01

    Opal hydrogels could be synthesized with polymer inverse opal template. A pH responsive opal N-iso- propylacrylamide/acrylic acid copolymerized hydrogel was prepared as an example. The ordered structure and response to pH were investigated. Through the sol-gel process of tetrabutyl titanate, opal titania was obtained with the opal hydrogel template.

  16. Waveguides for walking droplets

    CERN Document Server

    Filoux, Boris; Schlagheck, Peter; Vandewalle, Nicolas

    2015-01-01

    When gently placing a droplet onto a vertically vibrated bath, a drop can bounce permanently. Upon increasing the forcing acceleration, the droplet is propelled by the wave it generates and becomes a walker with a well defined speed. We investigate the confinement of a walker in different rectangular cavities, used as waveguides for the Faraday waves emitted by successive droplet bounces. By studying the walker velocities, we discover that 1d confinement is optimal for narrow channels. We also propose an analogy with waveguide models based on the observation of the Faraday instability within the channels.

  17. Electrostatic charging of jumping droplets

    Science.gov (United States)

    Miljkovic, Nenad; Preston, Daniel J.; Enright, Ryan; Wang, Evelyn N.

    2013-09-01

    With the broad interest in and development of superhydrophobic surfaces for self-cleaning, condensation heat transfer enhancement and anti-icing applications, more detailed insights on droplet interactions on these surfaces have emerged. Specifically, when two droplets coalesce, they can spontaneously jump away from a superhydrophobic surface due to the release of excess surface energy. Here we show that jumping droplets gain a net positive charge that causes them to repel each other mid-flight. We used electric fields to quantify the charge on the droplets and identified the mechanism for the charge accumulation, which is associated with the formation of the electric double layer at the droplet-surface interface. The observation of droplet charge accumulation provides insight into jumping droplet physics as well as processes involving charged liquid droplets. Furthermore, this work is a starting point for more advanced approaches for enhancing jumping droplet surface performance by using external electric fields to control droplet jumping.

  18. Homogeneous deposition of particles on hydrogels by absorption

    Science.gov (United States)

    Boulogne, François; Ingremeau, François; Dervaux, Julien; Limat, Laurent; Stone, Howard

    2016-11-01

    A drying drop containing solid particles, such as coffee, leaves a ring stain resulting from the accumulation of the particles near a contact line. In many industrial applications such as printing, coating or biological microtechnologies, these inhomogeneities must be avoided. To suppress the coffee stain effect, different strategies have been developed.In the present work, we propose to substitute the drying by absorption in hydrogels to extract the solvent of a colloidal drop. We study the deposition mechanisms of micrometer-sized particles on the surface of swelling hydrogels. To the best of our knowledge, we show for the first time that the particle deposition on these gels is homogeneous. Using fluorescence microscopy coupled with particle tracking techniques, we record the flow field inside the droplet and analyze the particle deposition mechanism. We rationalize our findings with a theoretical model for the absorption and the particle deposition dynamics that enables the measurement of the diffusion coefficient in the gels.

  19. Adhesion in hydrogel contacts

    Science.gov (United States)

    Torres, J. R.; Jay, G. D.; Kim, K.-S.; Bothun, G. D.

    2016-05-01

    A generalized thermomechanical model for adhesion was developed to elucidate the mechanisms of dissipation within the viscoelastic bulk of a hyperelastic hydrogel. Results show that in addition to the expected energy release rate of interface formation, as well as the viscous flow dissipation, the bulk composition exhibits dissipation due to phase inhomogeneity morphological changes. The mixing thermodynamics of the matrix and solvent determines the dynamics of the phase inhomogeneities, which can enhance or disrupt adhesion. The model also accounts for the time-dependent behaviour. A parameter is proposed to discern the dominant dissipation mechanism in hydrogel contact detachment.

  20. Microwave sensing and heating of individual droplets in microfluidic devices.

    Science.gov (United States)

    Boybay, Muhammed S; Jiao, Austin; Glawdel, Tomasz; Ren, Carolyn L

    2013-10-07

    Droplet-based microfluidics is an emerging high-throughput screening technology finding applications in a variety of areas such as life science research, drug discovery and material synthesis. In this paper we present a cost-effective, scalable microwave system that can be integrated with microfluidic devices enabling remote, simultaneous sensing and heating of individual nanoliter-sized droplets generated in microchannels. The key component of this microwave system is an electrically small resonator that is able to distinguish between materials with different electrical properties (i.e. permittivity, conductivity). The change in these properties causes a shift in the operating frequency of the resonator, which can be used for sensing purposes. Alternatively, if microwave power is delivered to the sensing region at the frequency associated with a particular material (i.e. droplet), then only this material receives the power while passing the resonator leaving the surrounding materials (i.e. carrier fluid and chip material) unaffected. Therefore this method allows sensing and heating of individual droplets to be inherently synchronized, eliminating the need for external triggers. We confirmed the performance of the sensor by applying it to differentiate between various dairy fluids, identify salt solutions and detect water droplets with different glycerol concentrations. We experimentally verified that this system can increase the droplet temperature from room temperature by 42 °C within 5.62 ms with an input power of 27 dBm. Finally we employed this system to thermally initiate the formation of hydrogel particles out of the droplets that are being heated by this system.

  1. Resonant and rolling droplet

    CERN Document Server

    Dorbolo, S; Vandewalle, N; Gilet, T

    2008-01-01

    When an oil droplet is placed on a quiescent oil bath, it eventually collapses into the bath due to gravity. The resulting coalescence may be eliminated when the bath is vertically vibrated. The droplet bounces periodically on the bath, and the air layer between the droplet and the bath is replenished at each bounce. This sustained bouncing motion is achieved when the forcing acceleration is higher than a threshold value. When the droplet has a sufficiently low viscosity, it significantly deforms : spherical harmonic \\boldmath{$Y_{\\ell}^m$} modes are excited, resulting in resonant effects on the threshold acceleration curve. Indeed, a lower acceleration is needed when $\\ell$ modes with $m=0$ are excited. Modes $m \

  2. Butschli Dynamic Droplet System

    DEFF Research Database (Denmark)

    Armstrong, R.; Hanczyc, M.

    2013-01-01

    Dynamical oil-water systems such as droplets display lifelike properties and may lend themselves to chemical programming to perform useful work, specifically with respect to the built environment. We present Butschli water-in-oil droplets as a model for further investigation into the development...... of a technology with living properties. Otto Butschli first described the system in 1898, when he used alkaline water droplets in olive oil to initiate a saponification reaction. This simple recipe produced structures that moved and exhibited characteristics that resembled, at least superficially, the amoeba. We...... temporal and spatial order in the system with the potential for chemical programmability. The authors propose that the discrete formation of dynamic droplets, characterized by their lifelike behavior patterns, during a variable window of time (from 30 s to 30 min after the addition of alkaline water...

  3. Bioprinting: Functional droplet networks

    Science.gov (United States)

    Durmus, Naside Gozde; Tasoglu, Savas; Demirci, Utkan

    2013-06-01

    Tissue-mimicking printed networks of droplets separated by lipid bilayers that can be functionalized with membrane proteins are able to spontaneously fold and transmit electrical currents along predefined paths.

  4. Functions of the Coacervate Droplets

    Science.gov (United States)

    Okihana, Hiroyuki; Ponnamperuma, Cyril

    1982-12-01

    Functions of coacervate droplets as protocells are studied by using synthetic polymers. The coacervate droplets were made from PVA-A and PVA-S. When glycine or diglycine were in the surrounding medium, the coacervate droplets concentrated them. The concentration of glycine in the coacervate droplets was higher than that of diglycine. When this mixture was irradiated by UV light, the coacervate droplets protected them from the photochemical decomposition.

  5. Droplet impacts upon liquid surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Ching, B.; Golay, M.W.; Johnson, T.J.

    1984-11-02

    The absorption and rebounding of single droplets and streams of droplets (of diameter less than 1200 micrometers) impacting upon the surface of a deep liquid were examined experimentally. Conservation of mechanical energy and momentum were used to explain rebounding droplet interactions, and impaction criteria have been established regarding the absorption of droplet streams. Surface tension is the dominant mechanism governing the observed behavior. Single droplets were never observed to rebound.

  6. Droplet based microfluidics

    Science.gov (United States)

    Seemann, Ralf; Brinkmann, Martin; Pfohl, Thomas; Herminghaus, Stephan

    2012-01-01

    Droplet based microfluidics is a rapidly growing interdisciplinary field of research combining soft matter physics, biochemistry and microsystems engineering. Its applications range from fast analytical systems or the synthesis of advanced materials to protein crystallization and biological assays for living cells. Precise control of droplet volumes and reliable manipulation of individual droplets such as coalescence, mixing of their contents, and sorting in combination with fast analysis tools allow us to perform chemical reactions inside the droplets under defined conditions. In this paper, we will review available drop generation and manipulation techniques. The main focus of this review is not to be comprehensive and explain all techniques in great detail but to identify and shed light on similarities and underlying physical principles. Since geometry and wetting properties of the microfluidic channels are crucial factors for droplet generation, we also briefly describe typical device fabrication methods in droplet based microfluidics. Examples of applications and reaction schemes which rely on the discussed manipulation techniques are also presented, such as the fabrication of special materials and biophysical experiments.

  7. Droplet based microfluidics.

    Science.gov (United States)

    Seemann, Ralf; Brinkmann, Martin; Pfohl, Thomas; Herminghaus, Stephan

    2012-01-01

    Droplet based microfluidics is a rapidly growing interdisciplinary field of research combining soft matter physics, biochemistry and microsystems engineering. Its applications range from fast analytical systems or the synthesis of advanced materials to protein crystallization and biological assays for living cells. Precise control of droplet volumes and reliable manipulation of individual droplets such as coalescence, mixing of their contents, and sorting in combination with fast analysis tools allow us to perform chemical reactions inside the droplets under defined conditions. In this paper, we will review available drop generation and manipulation techniques. The main focus of this review is not to be comprehensive and explain all techniques in great detail but to identify and shed light on similarities and underlying physical principles. Since geometry and wetting properties of the microfluidic channels are crucial factors for droplet generation, we also briefly describe typical device fabrication methods in droplet based microfluidics. Examples of applications and reaction schemes which rely on the discussed manipulation techniques are also presented, such as the fabrication of special materials and biophysical experiments.

  8. Microfluidic devices for droplet injection

    Science.gov (United States)

    Aubrecht, Donald; Akartuna, Ilke; Weitz, David

    2012-02-01

    As picoliter-scale reaction vessels, microfluidic water-in-oil emulsions have found application for high-throughput, large-sample number analyses. Often, the biological or chemical system under investigation needs to be encapsulated into droplets to prevent cross contamination prior to the introduction of reaction reagents. Previous techniques of picoinjection or droplet synchronization and merging enable the addition of reagents to individual droplets, but present limitations on what can be added to each droplet. We present microfluidic devices that couple the strengths of picoinjection and droplet merging, allowing us to selectively add precise volume to our droplet reactions.

  9. Microfluidics assisted generation of innovative polysaccharide hydrogel microparticles.

    Science.gov (United States)

    Marquis, M; Davy, J; Cathala, B; Fang, A; Renard, D

    2015-02-13

    Capillary flow-based approach such as microfluidic devices offer a number of advantages over conventional flow control technology because they ensure highly versatile geometry and can be used to produce monodisperse spherical and non-spherical polymeric microparticles. Based on the principle of a flow-focusing device to emulsify the coflow of aqueous solutions in an organic phase, we were able to produce the following innovative polysaccharide hydrogel microparticles: - Janus hydrogel microparticles made of pectin–pectin (homo Janus) and pectin–alginate (hetero Janus) were produced. The efficiency of separation of the two hemispheres was investigated by confocal scanning laser microscopy (CSLM) of previously labelled biopolymers. The Janus structure was confirmed by subjecting each microparticle hemisphere to specific enzymatic degradation. As a proof of concept, free BSA or BSA grafted with dextran, were encapsulated in each hemisphere of the hetero Janus hydrogel microparticles. While BSA, free or grafted with dextran, was always confined in the alginate hemisphere, a fraction of BSA diffused from the pectin to the alginate hemisphere. Methoxy groups along the pectin chain will be responsible of the decrease of the number of attractive electrostatic interactions occurring between amino groups of BSA and carboxylic groups of pectin. - Pectin hydrogel microparticles of complex shapes were successfully produced by combining on-chip the phenomenon of gelation and water diffusion induced self-assembly, using dimethyl carbonate as continuous phase, or by deformation of the pre-gelled droplets off-chip at a fluid–fluid interface. Sphere, oblate ellipsoid, torus or mushroom-type morphologies were thus obtained. Moreover, it was established that after crossing the interface during their collect, mushroom-type microparticles did not migrate in the calcium or DMC phase but stayed at the liquid–liquid interface. These new and original hydrogel microparticles will

  10. Chip-based droplet sorting

    Science.gov (United States)

    Beer, Neil Reginald; Lee, Abraham; Hatch, Andrew

    2014-07-01

    A non-contact system for sorting monodisperse water-in-oil emulsion droplets in a microfluidic device based on the droplet's contents and their interaction with an applied electromagnetic field or by identification and sorting.

  11. Chip-based droplet sorting

    Energy Technology Data Exchange (ETDEWEB)

    Beer, Neil Reginald; Lee, Abraham; Hatch, Andrew

    2014-07-01

    A non-contact system for sorting monodisperse water-in-oil emulsion droplets in a microfluidic device based on the droplet's contents and their interaction with an applied electromagnetic field or by identification and sorting.

  12. Enhancing Throughput of Combinatorial Droplet Devices via Droplet Bifurcation, Parallelized Droplet Fusion, and Parallelized Detection

    Directory of Open Access Journals (Sweden)

    Kuangwen Hsieh

    2015-10-01

    Full Text Available Combinatorial droplet microfluidic devices with programmable microfluidic valves have recently emerged as a viable approach for performing multiplexed experiments in microfluidic droplets. However, the serial operation in these devices restricts their throughput. To address this limitation, we present a parallelized combinatorial droplet device that enhances device throughput via droplet bifurcation, parallelized droplet fusion, and parallelized droplet detection. In this device, sample droplets split evenly at bifurcating Y-junctions before multiple independent reagent droplets are injected directly into the split sample droplets for robust droplet fusion. Finally, the fused sample and reagent droplets can be imaged in parallel via microscopy. The combination of these approaches enabled us to improve the throughput over traditional, serially-operated combinatorial droplet devices by 16-fold—with ready potential for further enhancement. Given its current performance and prospect for future improvements, we believe the parallelized combinatorial droplet device has the potential to meet the demand as a flexible and cost-effective tool that can perform high throughput screening applications.

  13. Self-Adjustable Adhesion of Polyampholyte Hydrogels.

    Science.gov (United States)

    Roy, Chanchal Kumar; Guo, Hong Lei; Sun, Tao Lin; Ihsan, Abu Bin; Kurokawa, Takayuki; Takahata, Masakazu; Nonoyama, Takayuki; Nakajima, Tasuku; Gong, Jian Ping

    2015-12-02

    Developing nonspecific, fast, and strong adhesives that can glue hydrogels and biotissues substantially promotes the application of hydrogels as biomaterials. Inspired by the ubiquitous adhesiveness of bacteria, it is reported that neutral polyampholyte hydrogels, through their self-adjustable surface, can show rapid, strong, and reversible adhesion to charged hydrogels and biological tissues through the Coulombic interaction.

  14. Impact of blood droplets

    NARCIS (Netherlands)

    N. Laan

    2015-01-01

    Within Bloodstain Pattern Analysis, forensic experts commonly use the stringing method, based on a straight line approximation of the blood droplets trajectories to determine where the source of a bloodstain pattern was. However, by ignoring gravity, large errors may arise when inferring the 3D-loca

  15. Sessile nanofluid droplet drying.

    Science.gov (United States)

    Zhong, Xin; Crivoi, Alexandru; Duan, Fei

    2015-03-01

    Nanofluid droplet evaporation has gained much audience nowadays due to its wide applications in painting, coating, surface patterning, particle deposition, etc. This paper reviews the drying progress and deposition formation from the evaporative sessile droplets with the suspended insoluble solutes, especially nanoparticles. The main content covers the evaporation fundamental, the particle self-assembly, and deposition patterns in sessile nanofluid droplet. Both experimental and theoretical studies are presented. The effects of the type, concentration and size of nanoparticles on the spreading and evaporative dynamics are elucidated at first, serving the basis for the understanding of particle motion and deposition process which are introduced afterward. Stressing on particle assembly and production of desirable residue patterns, we express abundant experimental interventions, various types of deposits, and the effects on nanoparticle deposition. The review ends with the introduction of theoretical investigations, including the Navier-Stokes equations in terms of solutions, the Diffusion Limited Aggregation approach, the Kinetic Monte Carlo method, and the Dynamical Density Functional Theory. Nanoparticles have shown great influences in spreading, evaporation rate, evaporation regime, fluid flow and pattern formation of sessile droplets. Under different experimental conditions, various deposition patterns can be formed. The existing theoretical approaches are able to predict fluid dynamics, particle motion and deposition patterns in the particular cases. On the basis of further understanding of the effects of fluid dynamics and particle motion, the desirable patterns can be obtained with appropriate experimental regulations.

  16. Stretchable Hydrogel Electronics and Devices.

    Science.gov (United States)

    Lin, Shaoting; Yuk, Hyunwoo; Zhang, Teng; Parada, German Alberto; Koo, Hyunwoo; Yu, Cunjiang; Zhao, Xuanhe

    2016-06-01

    Stretchable hydrogel electronics and devices are designed by integrating stretchable conductors, functional chips, drug-delivery channels, and reservoirs into stretchable, robust, and biocompatible hydrogel matrices. Novel applications include a smart wound dressing capable of sensing the temperatures of various locations on the skin, delivering different drugs to these locations, and subsequently maintaining sustained release of drugs.

  17. Hydrogels with micellar hydrophobic (nanodomains

    Directory of Open Access Journals (Sweden)

    Miloslav ePekař

    2015-01-01

    Full Text Available Hydrogels containing hydrophobic domains or nanodomains, especially of the micellar type, are reviewed. Examples of the reasons for introducing hydrophobic domains into hydrophilic gels are given; typology of these materials is introduced. Synthesis routes are exemplified and properties of a variety of such hydrogels in relation with their intended applications are described. Future research needs are identified briefly.

  18. MESO—STRUCTURED POLYMERIC HYDROGELS

    Institute of Scientific and Technical Information of China (English)

    Zhen-zhongYang; Jian-huaRong; DanLi

    2003-01-01

    Meso-structured(opal and inverse opal) polymeric hydrogels of varied morphology and composition were prepared by using two methods:post-modification of the template-synthesized structured polymers and templatepolymerization of functional monomers.A polyacrylic acid based inverse opal hydrogel was chosen to demonstrate its fast pH response by changing color,which is important in designing tunable photonic crystals.Template effects of the hydrogels on controlling structure of the template-synthesized inorganic materials were discussed.The catalytic effect of acid groups in the templates was emphasized for a preferential formation of TiO2 in the region containing acid groups,which allowed duplicating inorganic colloidal crystals from colloidal crystal hydrogels (or macroporous products from macroporous hydrogels) via one step duplication.

  19. MESO-STRUCTURED POLYMERIC HYDROGELS

    Institute of Scientific and Technical Information of China (English)

    Zhen-zhong Yang; Jian-hua Rong; Dan Li

    2003-01-01

    Meso-structured (opal and inverse opal) polymeric hydrogels of varied morphology and composition were prepared by using two methods: post-modification of the template-synthesized structured polymers and templatepolymerization of functional monomers. A polyacrylic acid based inverse opal hydrogel was chosen to demonstrate its fast pH response by changing color, which is important in designing tunable photonic crystals. Template effects of the hydrogels on controlling structure of the template-synthesized inorganic materials were discussed. The catalytic effect of acid groups inthe templates was emphasized for a preferential formation of TiO2 in the region containing acid groups, which allowed duplicating inorganic colloidal crystals from colloidal crystal hydrogels (or macroporous products from macroporous hydrogels) via one step duplication.

  20. Buckling instability of squeezed droplets

    CERN Document Server

    Elfring, Gwynn J

    2015-01-01

    Motivated by recent experiments, we consider theoretically the compression of droplets pinned at the bottom on a surface of finite area. We show that if the droplet is sufficiently compressed at the top by a surface, it will always develop a shape instability at a critical compression. When the top surface is flat, the shape instability occurs precisely when the apparent contact angle of the droplet at the pinned surface is pi, regardless of the contact angle of the upper surface, reminiscent of past work on liquid bridges and sessile droplets as first observed by Plateau. After the critical compression, the droplet transitions from a symmetric to an asymmetric shape. The force required to deform the droplet peaks at the critical point then progressively decreases indicative of catastrophic buckling. We characterize the transition in droplet shape using illustrative examples in two dimensions followed by perturbative analysis as well as numerical simulation in three dimensions. When the upper surface is not f...

  1. Droplets and sprays

    CERN Document Server

    Sazhin, Sergei

    2014-01-01

    Providing a clear and systematic description of droplets and spray dynamic models, this book maximises reader insight into the underlying physics of the processes involved, outlines the development of new physical and mathematical models, and broadens understanding of interactions between the complex physical processes which take place in sprays. Complementing approaches based on the direct application of computational fluid dynamics (CFD), Droplets and Sprays treats both theoretical and practical aspects of internal combustion engine process such as the direct injection of liquid fuel, subcritical heating and evaporation. Includes case studies that illustrate the approaches relevance to automotive applications,  it is also anticipated that the described models can find use in other areas such as in medicine and environmental science.

  2. Hovering UFO Droplets

    CERN Document Server

    Anand, Sushant; Dhiman, Rajeev; Smith, J David; Varanasi, Kripa K

    2012-01-01

    This fluid dynamics video is an entry for the Gallery of Fluid Motion of the 65th Annual Meeting of the APS-DFD. This video shows behavior of condensing droplets on a lubricant impregnated surface and a comparison with a superhydrophobic surface. On impregnated surfaces, drops appear like UFOs hovering over a surface. The videos were recorded in an Environmental SEM and a specially built condensation rig.

  3. Syneresis in agar hydrogels.

    Science.gov (United States)

    Boral, Shilpi; Saxena, Anita; Bohidar, H B

    2010-03-01

    Agar hydrogels exhibit syneresis which creates internal osmotic stress on the physical network. It was observed that such a stress gives rise to characteristic pulsating modes (breathing modes). Experiments carried over a period of 60-day revealed that the network deformations grew monotonously when the solvent released by syneresis was removed periodically from gel surface. However, when the solvent was not withdrawn, the gel exhibited very slowly relaxing breathing modes. The swelling-deswelling dynamics has been discussed in the generalized framework of a dissipative damped oscillator.

  4. Rapidly pulsed helium droplet source

    Energy Technology Data Exchange (ETDEWEB)

    Pentlehner, Dominik; Riechers, Ricarda; Dick, Bernhard; Slenczka, Alkwin [Institute for Physical and Theoretical Chemistry, University of Regensburg, 93053 Regensburg (Germany); Even, Uzi; Lavie, Nachum; Brown, Raviv; Luria, Kfir [Sackler Faculty of Exact Sciences, School of Chemistry, Tel Aviv University, Ramat Aviv, 69978 Tel Aviv (Israel)

    2009-04-15

    A pulsed valve connected to a closed-cycle cryostat was optimized for producing helium droplets. The pulsed droplet beam appeared with a bimodal size distribution. The leading part of the pulse consists of droplets suitable for doping with molecules. The average size of this part can be varied between 10{sup 4} and 10{sup 6} helium atoms, and the width of the distribution is smaller as compared to a continuous-flow droplet source. The system has been tested in a single pulse mode and at repetition rates of up to 500 Hz with almost constant intensity. The droplet density was found to be increased by more than an order of magnitude as compared to a continuous-flow droplet source.

  5. Evaporation of inclined water droplets

    Science.gov (United States)

    Kim, Jin Young; Hwang, In Gyu; Weon, Byung Mook

    2017-02-01

    When a drop is placed on a flat substrate tilted at an inclined angle, it can be deformed by gravity and its initial contact angle divides into front and rear contact angles by inclination. Here we study on evaporation dynamics of a pure water droplet on a flat solid substrate by controlling substrate inclination and measuring mass and volume changes of an evaporating droplet with time. We find that complete evaporation time of an inclined droplet becomes longer as gravitational influence by inclination becomes stronger. The gravity itself does not change the evaporation dynamics directly, whereas the gravity-induced droplet deformation increases the difference between front and rear angles, which quickens the onset of depinning and consequently reduces the contact radius. This result makes the evaporation rate of an inclined droplet to be slow. This finding would be important to improve understanding on evaporation dynamics of inclined droplets.

  6. Droplet microfluidics based microseparation systems.

    Science.gov (United States)

    Xiao, Zhiliang; Niu, Menglei; Zhang, Bo

    2012-06-01

    Lab on a chip (LOC) technology is a promising miniaturization approach. The feature that it significantly reduced sample consumption makes great sense in analytical and bioanalytical chemistry. Since the start of LOC technology, much attention has been focused on continuous flow microfluidic systems. At the turn of the century, droplet microfluidics, which was also termed segmented flow microfluidics, was introduced. Droplet microfluidics employs two immiscible phases to form discrete droplets, which are ideal vessels with confined volume, restricted dispersion, limited cross-contamination, and high surface area. Due to these unique features, droplet microfluidics proves to be a versatile tool in microscale sample handling. This article reviews the utility of droplet microfluidics in microanalytical systems with an emphasize on separation science, including sample encapsulation at ultra-small volume, compartmentalization of separation bands, isolation of droplet contents, and related detection techniques.

  7. Evaporation of inclined water droplets

    Science.gov (United States)

    Kim, Jin Young; Hwang, In Gyu; Weon, Byung Mook

    2017-01-01

    When a drop is placed on a flat substrate tilted at an inclined angle, it can be deformed by gravity and its initial contact angle divides into front and rear contact angles by inclination. Here we study on evaporation dynamics of a pure water droplet on a flat solid substrate by controlling substrate inclination and measuring mass and volume changes of an evaporating droplet with time. We find that complete evaporation time of an inclined droplet becomes longer as gravitational influence by inclination becomes stronger. The gravity itself does not change the evaporation dynamics directly, whereas the gravity-induced droplet deformation increases the difference between front and rear angles, which quickens the onset of depinning and consequently reduces the contact radius. This result makes the evaporation rate of an inclined droplet to be slow. This finding would be important to improve understanding on evaporation dynamics of inclined droplets. PMID:28205642

  8. Droplets Evaporation on Heated Wall

    Directory of Open Access Journals (Sweden)

    Misyura S. Y.

    2015-01-01

    Full Text Available Various modes of evaporation in a wide range of droplet sizes and wall temperatures have been investigated in the present work. For any initial drop size there are three typical boiling regime: 1 the nucleate boiling; 2 the transitional regime; 3 the film boiling. The width of the transition region of boiling crisis increases with increasing the initial volume V0. Evaporation of large droplets at high superheat depends on the initial droplet shape.

  9. Small droplets on superhydrophobic substrates.

    Science.gov (United States)

    Gross, Markus; Varnik, Fathollah; Raabe, Dierk; Steinbach, Ingo

    2010-05-01

    We investigate the wetting behavior of liquid droplets on rough hydrophobic substrates for the case of droplets that are of comparable size to the surface asperities. Using a simple three-dimensional analytical free-energy model, we have shown in a recent letter [M. Gross, F. Varnik, and D. Raabe, EPL 88, 26002 (2009)] that, in addition to the well-known Cassie-Baxter and Wenzel states, there exists a further metastable wetting state where the droplet is immersed into the texture to a finite depth, yet not touching the bottom of the substrate. Due to this new state, a quasistatically evaporating droplet can be saved from going over to the Wenzel state and instead remains close to the top of the surface. In the present paper, we give an in-depth account of the droplet behavior based on the results of extensive computer simulations and an improved theoretical model. In particular, we show that releasing the assumption that the droplet is pinned at the outer edges of the pillars improves the analytical results for larger droplets. Interestingly, all qualitative aspects, such as the existence of an intermediate minimum and the "reentrant transition," remain unchanged. We also give a detailed description of the evaporation process for droplets of varying sizes. Our results point out the role of droplet size for superhydrophobicity and give hints for achieving the desired wetting properties of technically produced materials.

  10. Synthetically simple, highly resilient hydrogels.

    Science.gov (United States)

    Cui, Jun; Lackey, Melissa A; Madkour, Ahmad E; Saffer, Erika M; Griffin, David M; Bhatia, Surita R; Crosby, Alfred J; Tew, Gregory N

    2012-03-12

    Highly resilient synthetic hydrogels were synthesized by using the efficient thiol-norbornene chemistry to cross-link hydrophilic poly(ethylene glycol) (PEG) and hydrophobic polydimethylsiloxane (PDMS) polymer chains. The swelling and mechanical properties of the hydrogels were controlled by the relative amounts of PEG and PDMS. The fracture toughness (G(c)) was increased to 80 J/m(2) as the water content of the hydrogel decreased from 95% to 82%. In addition, the mechanical energy storage efficiency (resilience) was more than 97% at strains up to 300%. This is comparable with one of the most resilient materials known: natural resilin, an elastic protein found in many insects, such as in the tendons of fleas and the wings of dragonflies. The high resilience of these hydrogels can be attributed to the well-defined network structure provided by the versatile chemistry, low cross-link density, and lack of secondary structure in the polymer chains.

  11. Cytocompatible cellulose hydrogels containing trace lignin.

    Science.gov (United States)

    Nakasone, Kazuki; Kobayashi, Takaomi

    2016-07-01

    Sugarcane bagasse was used as a cellulose resource to prepare transparent and flexible cellulose hydrogel films. On the purification process from bagasse to cellulose, the effect of lignin residues in the cellulose was examined for the properties and cytocompatibility of the resultant hydrogel films. The cellulose was dissolved in lithium chloride/N,N-dimethylacetamide solution and converted to hydrogel films by phase inversion. In the purification process, sodium hydroxide (NaOH) treatment time was changed from 1 to 12h. This resulted in cellulose hydrogel films having small amounts of lignin from 1.62 to 0.68%. The remaining lignin greatly affected hydrogel properties. Water content of the hydrogel films was increased from 1153 to 1525% with a decrease of lignin content. Moreover, lower lignin content caused weakening of tensile strength from 0.80 to 0.43N/mm(2) and elongation from 45.2 to 26.5%. Also, similar tendency was observed in viscoelastic behavior of the cellulose hydrogel films. Evidence was shown that the lignin residue was effective for the high strength of the hydrogel films. In addition, scanning probe microscopy in the morphological observation was suggested that the trace lignin in the cellulose hydrogel affected the cellulose fiber aggregation in the hydrogel network. The trace of lignin in the hydrogels also influenced fibroblast cell culture on the hydrogel films. The hydrogel film containing 1.68% lignin showed better fibroblast compatibility as compared to cell culture polystyrene dish used as reference.

  12. Energy conversion in polyelectrolyte hydrogels

    Science.gov (United States)

    Olvera de La Cruz, Monica; Erbas, Aykut; Olvera de la Cruz Team

    Energy conversion and storage have been an active field of research in nanotechnology parallel to recent interests towards renewable energy. Polyelectrolyte (PE) hydrogels have attracted considerable attention in this field due to their mechanical flexibility and stimuli-responsive properties. Ideally, when a hydrogel is deformed, applied mechanical work can be converted into electrostatic, elastic and steric-interaction energies. In this talk, we discuss the results of our extensive molecular dynamics simulations of PE hydrogels. We demonstrate that, on deformation, hydrogels adjust their deformed state predominantly by altering electrostatic interactions between their charged groups rather than excluded-volume and bond energies. This is due to the hydrogel's inherent tendency to preserve electro-neutrality in its interior, in combination with correlations imposed by backbone charges. Our findings are valid for a wide range of compression ratios and ionic strengths. The electrostatic-energy alterations that we observe in our MD simulations may induce pH or redox-potential changes inside the hydrogels. The resulting energetic difference can be harvested, for instance, analogously to a Carnot engine, or facilitated for sensor applications. Center for Bio-inspired Energy Science (CBES).

  13. Significance of droplet-droplet interactions in droplet streams: Atmospheric to supercritical conditions

    Science.gov (United States)

    Connon, Corinne Shirley

    In an effort to optimize liquid fuel combustion a considerable amount of research has been directed towards the atomization of large liquid masses into small droplets to increase the surface area available for vaporization. The current work uses a single linear array of moving droplets of uniform size and spacing to investigate the behavior of interacting droplets. A series of experiments, over a range of ambient conditions, demonstrate how a lead droplet alters the environment experienced by its trailing neighbor. This behavior is of particular interest for droplet groups under high pressure and temperature, where experimental data has been limited. Gas phase velocity and vapor concentration measurements show that as the space between adjacent droplets decreases entrainment of fluid towards the axis of motion is reduced. Trapped gases create a gaseous cylinder, composed of ambient gas and fuel vapor, which surrounds and moves with the droplet stream. As ambient pressure increase, the oscillatory behavior of the lead droplet wake begins to interfere with its trailing neighbor. Loss of stream stability and enhanced droplet stripping in part result from these oscillating wakes. However, acceleration of droplet stripping is mainly produced by liquid and gas density similarity, which increases the centrifugal stress and the growth rate of capillary waves. Further, injection of subcritical droplets into an ambient environment at temperatures and pressures above the liquid droplet critical point shows behavior not greatly different from the results obtained at high ambient pressures. The similarity results from thermal heatup times exceeding the breakup times generated from the severe aerodynamics encountered at high ambient density and high liquid-gas relative velocities.

  14. Supramolecular hydrogels as drug delivery systems.

    Science.gov (United States)

    Saboktakin, Mohammad Reza; Tabatabaei, Roya Mahdavi

    2015-04-01

    Drug delivery from a hydrogel carrier implanted under the kidney capsule is an innovative way to induce kidney tissue regeneration and/or prevent kidney inflammation or fibrosis. We report here on the development of supramolecular hydrogels for this application. Chain-extended hydrogelators containing hydrogen bonding units in the main chain, and bifunctional hydrogelators end-functionalized with hydrogen bonding moieties, were made. The influence of these hydrogels on the renal cortex when implanted under the kidney capsule was studied. The overall tissue response to these hydrogels was found to be mild, and minimal damage to the cortex was observed, using the infiltration of macrophages, formation of myofibroblasts, and the deposition of collagen III as relevant read-out parameters. Differences in tissue response to these hydrogels could be related to the different physico-chemical properties of the three hydrogels.

  15. Patterns in swelling hydrogels

    Science.gov (United States)

    MacMinn, Chris; Bertrand, Thibault; Peixinho, Jorge; Mukhopadhyay, Shomeek

    2016-11-01

    Swelling is a process in which a porous material spontaneously grows by absorbing additional pore fluid. Polymeric hydrogels are highly deformable materials that can experience very large volume changes during swelling. This allows a small amount of dry gel to absorb a large amount of fluid, making gels extremely useful in applications from moisture control to drug delivery. However, a well-known consequence of these extreme volume changes is the emergence of a striking morphological instability. We study the transient mechanics of this instability here by combining a theoretical model with a series of simple experiments, focusing on the extent to which this instability can be controlled by manipulating the rate of swelling.

  16. Hydrodynamics of a quark droplet

    DEFF Research Database (Denmark)

    Bjerrum-Bohr, Johan J.; Mishustin, Igor N.; Døssing, Thomas

    2012-01-01

    model. We have considered evolution of baryon-free droplets which have different initial temperatures and expansion rates. As a typical trend we observe an oscillating behavior of the droplet radius superimposed with a gradual shrinkage due to the hadron emission. The characteristic life time...

  17. Coalescence-induced droplet actuation

    Science.gov (United States)

    Sellier, Mathieu; Verdier, Claude; Nock, Volker

    2011-11-01

    This work investigates a little explored driving mechanism to actuate droplets: the surface tension gradient which arises during the coalescence of two droplets of liquid having different compositions and therefore surface tensions. The resulting surface tension gradient gives rise to a Marangoni flow which, if sufficiently large, can displace the droplet. In order to understand, the flow dynamics arising during the coalescence of droplets of different fluids, a model has been developed in the lubrication framework. The numerical results confirm the existence of a self-propulsion window which depends on two dimensionless groups representing competing effects during the coalescence: the surface tension contrast between the droplets which promotes actuation and species diffusion which tends to make the mixture uniform thereby anihilating Marangoni flow and droplet motion. In parallel, experiments have been conducted to confirm this self-propulsion behaviour. The experiment consists in depositing a droplet of distilled water on a ``hydrophilic highway.'' This stripe was obtained by plasma-treating a piece of PDMS shielded in some parts by glass coverslips. This surface functionalization was found to be the most convenient way to control the coalescence. When a droplet of ethanol is deposited near the ``water slug,'' coalescence occurs and a rapid motion of the resulting mixture is observed. The support of the Dumont d'Urville NZ-France Science & Technology program is gratefully acknowledged.

  18. Alginate-Collagen Fibril Composite Hydrogel

    Directory of Open Access Journals (Sweden)

    Mahmoud Baniasadi

    2015-02-01

    Full Text Available We report on the synthesis and the mechanical characterization of an alginate-collagen fibril composite hydrogel. Native type I collagen fibrils were used to synthesize the fibrous composite hydrogel. We characterized the mechanical properties of the fabricated fibrous hydrogel using tensile testing; rheometry and atomic force microscope (AFM-based nanoindentation experiments. The results show that addition of type I collagen fibrils improves the rheological and indentation properties of the hydrogel.

  19. DROPLET COLLISION AND COALESCENCE MODEL

    Institute of Scientific and Technical Information of China (English)

    LI Qiang; CAI Ti-min; HE Guo-qiang; HU Chun-bo

    2006-01-01

    A new droplet collision and coalescence model was presented, a quick-sort method for locating collision partners was also devised and based on theoretical and experimental results, further advancement was made to the droplet collision outcome.The advantages of the two implementations of smoothed particle hydrodynamics (SPH)method were used to limit the collision of droplets to a given number of nearest droplets and define the probability of coalescence, numerical simulations were carried out for model validation. Results show that the model presented is mesh-independent and less time consuming, it can not only maintains the system momentum conservation perfectly, but not susceptible to initial droplet size distribution as well.

  20. Hydrogels with covalent and noncovalent crosslinks

    Science.gov (United States)

    Kilck, Kristi L. (Inventor); Yamaguchi, Nori (Inventor)

    2013-01-01

    A method for targeted delivery of therapeutic compounds from hydrogels is presented. The method involves administering to a cell a hydrogel in which a therapeutic compound is noncovalently bound to heparin. The hydrogel may contain covalent and non-covalent crosslinks.

  1. Magnetically Remanent Hydrogels with Colloidal Crosslinkers

    NARCIS (Netherlands)

    van Berkum, S.

    2014-01-01

    Hydrogels are widely used in biomedical applications such as drug delivery and tissue engineering. In this research, the feasibility of a hydrogel with embedded magnetic nanoparticles, also called a ferrogel, for biosensor applications was tested. A pH sensitive poly(acrylic acid) hydrogel was used

  2. Leidenfrost levitation: beyond droplets.

    Science.gov (United States)

    Hashmi, Ali; Xu, Yuhao; Coder, Benjamin; Osborne, Paul A; Spafford, Jonathon; Michael, Grant E; Yu, Gan; Xu, Jie

    2012-01-01

    Friction is a major inhibitor in almost every mechanical system. Enlightened by the Leidenfrost effect - a droplet can be levitated by its own vapor layer on a sufficiently hot surface - we demonstrate for the first time that a small cart can also be levitated by Leidenfrost vapor. The levitated cart can carry certain amount of load and move frictionlessly over the hot surface. The maximum load that the cart can carry is experimentally tested over a range of surface temperatures. We show that the levitated cart can be propelled not only by gravitational force over a slanted flat surface, but also self-propelled over a ratchet shaped horizontal surface. In the end, we experimentally tested water consumption rate for sustaining the levitated cart, and compared the results to theoretical calculations. If perfected, this frictionless Leidenfrost cart could be used in numerous engineering applications where relative motion exists between surfaces.

  3. In vivo behavior of hydrogel beads based on amidated pectins.

    Science.gov (United States)

    Munjeri, O; Collett, J H; Fell, J T; Sharma, H L; Smith, A M

    1998-01-01

    Radio-labeled hydrogel beads, based on amidated pectin, have been produced by adding droplets of an amidated pectin solution to calcium chloride. Incorporation of model drugs into the beads and measurement of the dissolution rate showed that the properties of the beads were unaffected by the incorporation of the radiolabel. The labeled beads were used to carry out an in vivo study of their behavior in the gastrointestinal tract using human volunteers. The volunteers were given the beads after an overnight fast and images were obtained at frequent intervals during transit through the upper gastrointestinal tract and the colon. The beads exhibited rapid gastric emptying and proceeded to pass through the small intestine individually before regrouping at the ileo-caecal junction. Once in the colon, the beads again proceeded as individuals and evidence of the degradation of the beads was observed.

  4. Droplets, Bubbles and Ultrasound Interactions.

    Science.gov (United States)

    Shpak, Oleksandr; Verweij, Martin; de Jong, Nico; Versluis, Michel

    2016-01-01

    The interaction of droplets and bubbles with ultrasound has been studied extensively in the last 25 years. Microbubbles are broadly used in diagnostic and therapeutic medical applications, for instance, as ultrasound contrast agents. They have a similar size as red blood cells, and thus are able to circulate within blood vessels. Perfluorocarbon liquid droplets can be a potential new generation of microbubble agents as ultrasound can trigger their conversion into gas bubbles. Prior to activation, they are at least five times smaller in diameter than the resulting bubbles. Together with the violent nature of the phase-transition, the droplets can be used for local drug delivery, embolotherapy, HIFU enhancement and tumor imaging. Here we explain the basics of bubble dynamics, described by the Rayleigh-Plesset equation, bubble resonance frequency, damping and quality factor. We show the elegant calculation of the above characteristics for the case of small amplitude oscillations by linearizing the equations. The effect and importance of a bubble coating and effective surface tension are also discussed. We give the main characteristics of the power spectrum of bubble oscillations. Preceding bubble dynamics, ultrasound propagation is introduced. We explain the speed of sound, nonlinearity and attenuation terms. We examine bubble ultrasound scattering and how it depends on the wave-shape of the incident wave. Finally, we introduce droplet interaction with ultrasound. We elucidate the ultrasound-focusing concept within a droplets sphere, droplet shaking due to media compressibility and droplet phase-conversion dynamics.

  5. Electrochemical characterization of hydrogels for biomimetic applications

    DEFF Research Database (Denmark)

    Peláez, L.; Romero, V.; Escalera, S.

    2011-01-01

    ) or a photoinitiator (P) to encapsulate and stabilize biomimetic membranes for novel separation technologies or biosensor applications. In this paper, we have investigated the electrochemical properties of the hydrogels used for membrane encapsulation. Specifically, we studied the crosslinked hydrogels by using...... electrochemical impedance spectroscopy (EIS), and we demonstrated that chemically crosslinked hydrogels had lower values for the effective electrical resistance and higher values for the electrical capacitance compared with hydrogels with photoinitiated crosslinking. Transport numbers were obtained using......〉 and 〈Pw〉 values than PEG‐1000‐DMA‐P and PEG‐400‐DA‐P hydrogels. In conclusion, our results show that hydrogel electrochemical properties can be controlled by the choice of polymer and type of crosslinking used and that their water and salt permeability properties are congruent with the use of hydrogels...

  6. Tough photoluminescent hydrogels doped with lanthanide.

    Science.gov (United States)

    Wang, Mei Xiang; Yang, Can Hui; Liu, Zhen Qi; Zhou, Jinxiong; Xu, Feng; Suo, Zhigang; Yang, Jian Hai; Chen, Yong Mei

    2015-03-01

    Photoluminescent hydrogels have emerged as novel soft materials with potential applications in many fields. Although many photoluminescent hydrogels have been fabricated, their scope of usage has been severely limited by their poor mechanical performance. Here, a facile strategy is reported for preparing lanthanide (Ln)-alginate/polyacrylamide (PAAm) hydrogels with both high toughness and photoluminescence, which has been achieved by doping Ln(3+) ions (Ln = Eu, Tb, Eu/Tb) into alginate/PAAm hydrogel networks, where Ln(3+) ions serve as both photoluminescent emitters and physical cross-linkers. The resulting hydrogels exhibit versatile advantages including excellent mechanical properties (∼ MPa strength, ≈ 20 tensile strains, ≈ 10(4) kJ m(-3) energy dissipation), good photoluminescent performance, tunable emission color, excellent processability, and cytocompatibility. The developed tough photoluminescent hydrogels hold great promises for expanding the usage scope of hydrogels.

  7. Droplet depinning in a wake

    Science.gov (United States)

    Hooshanginejad, Alireza; Lee, Sungyon

    2017-03-01

    Pinning and depinning of a windswept droplet on a surface is familiar yet deceptively complex for it depends on the interaction of the contact line with the microscopic features of the solid substrate. This physical picture is further compounded when wind of the Reynolds number greater than 100 blows over pinned drops, leading to the boundary layer separation and wake generation. In this Rapid Communication, we incorporate the well-developed ideas of the classical boundary layer to study partially wetting droplets in a wake created by a leader object. Depending on its distance from the leader, the droplet is observed to exhibit drafting, upstream motion, and splitting, due to the wake-induced hydrodynamic coupling that is analogous to drafting of moving bodies. We successfully rationalize the onset of the upstream motion regime using a reduced model that computes the droplet shape governed by the pressure field inside the wake.

  8. The energetics of bouncing droplets

    Science.gov (United States)

    Turton, Sam; Molacek, Jan; Bush, John

    2016-11-01

    We present the results of a theoretical investigation of the energetics of droplets bouncing on the surface of a vertically vibrating bath. We first assess the relative magnitudes of the kinetic, surface and gravitational potential energies of both the droplet and its wave field. We then seek to rationalize the transitions between the various bouncing and walking states that arise as the vibrational forcing is increased. Our results are compared with prior theoretical and experimental work.

  9. Magnetic droplets and dynamical skyrmions

    Science.gov (United States)

    Akerman, Johan

    2015-03-01

    Nanocontact spin-torque oscillators (NC-STOs) provide an excellent environment for studying nano-magnetic phenomena such as localized and propagating auto-oscillatory spin wave (SW) modes. The recent experimental observation of magnetic droplet solitons in NC-STOs with perpendicular magnetic anisotropy (PMA) free layers, and the numerical and experimental demonstrations of spin transfer torque (STT) nucleated skyrmions in similar magnetic thin films add two interesting and useful nanoscale magnetic objects. Due to the competition between exchange, anisotropy, and, in the case of skyrmions, the Dzyaloshinskii-Moriya interaction (DMI), the droplet and the skyrmion are extremely compact, on the order of 10-100 nm. One of the main differences between a magnetic dissipative droplet soliton and a skyrmion is that the former is a dynamical object with all its spins precessing around an effective field and stabilized by STT, exchange, and PMA, while the latter has static spins and an internal structure stabilized by DMI, exchange, and PMA. The dissipative droplet is furthermore a non-topological soliton, while the skyrmion is topologically protected. In this work I will report on our most recent droplet experiments, including droplet collapse at very high fields, droplets excited in nano-wire based NC-STOs, and studies of the field-current droplet nucleation boundary. I will also demonstrate numerically and analytically that STT driven precession can stabilize so-called dynamical skyrmions even in the absence of DMI, and I will describe their very promising properties in detail. From a more fundamental perspective, precession is hence a third independent possibility to stabilize a skyrmion, without the need for the conventional stabilization from either dipolar energy or DMI.

  10. Fabrication of keratin-silica hydrogel for biomedical applications

    Energy Technology Data Exchange (ETDEWEB)

    Kakkar, Prachi; Madhan, Balaraman, E-mail: bmadhan76@yahoo.co.in

    2016-09-01

    In the recent past, keratin has been fabricated into different forms of biomaterials like scaffold, gel, sponge, film etc. In lieu of the myriad advantages of the hydrogels for biomedical applications, a keratin-silica hydrogel was fabricated using tetraethyl orthosilicate (TEOS). Textural analysis shed light on the physical properties of the fabricated hydrogel, inturn enabling the optimization of the hydrogel. The optimized keratin-silica hydrogel was found to exhibit instant springiness, optimum hardness, with ease of spreadability. Moreover, the hydrogel showed excellent swelling with highly porous microarchitecture. MTT assay and DAPI staining revealed that keratin-silica hydrogel was biocompatible with fibroblast cells. Collectively, these properties make the fabricated keratin-silica hydrogel, a suitable dressing material for biomedical applications. - Highlights: • Keratin-silica hydrogel has been fabricated using sol–gel technique. • The hydrogel shows appropriate textural properties. • The hydrogel promotes fibroblast cells proliferation. • The hydrogel has potential soft tissue engineering applications like wound healing.

  11. Polyvinyl alcohol hydrogels for iontohporesis

    Science.gov (United States)

    Bera, Prasanta; Alam, Asif Ali; Arora, Neha; Tibarewala, Dewaki Nandan; Basak, Piyali

    2013-06-01

    Transdermal therapeutic systems propound controlled release of active ingredients through the skin into the systemic circulation in a predictive manner. Drugs administered through these systems escape first-pass metabolism and maintain a steady state scenario similar to a continuous intravenous infusion for up to several days. The iontophoresis deal with the systemic delivery of the bioactive agents (drug) by applying an electric current. It is basically an injection without the needle. The iontophoretic system requires a gel-based matrix to accommodate the bioactive agent. Hydrogels have been used by many investigators in controlled-release drug delivery systems because of their good tissue compatibility and easy manipulation of swelling level and, thereby, solute permeability. In this work we have prepared polyvinyl alcohol (PVA) hydrogel. We have cross linked polyvinyl alcohol chemically with Glutaraldehyde with different wt%. FTIR study reveals the chemical changes during cross linking. Swelling in water, is done to have an idea about drug loading and drug release from the membrane. After drug loading to the hydrogels, we have studied the drug release property of the hydrogels using salicylic acid as a model drug.

  12. Heparin release from thermosensitive hydrogels

    NARCIS (Netherlands)

    Gutowska, Anna; Bae, You Han; Feijen, Jan; Kim, Sung Wan

    1992-01-01

    Thermosensitive hydrogels (TSH) were synthesized and investigated as heparin releasing polymers for the prevention of surface induced thrombosis. TSH were synthesized with N-isopropyl acrylamide (NiPAAm) copolymerized with butyl methacrylate (BMA) (hydrophobic) or acrylic acid (AAc) (hydrophilic) co

  13. Hydrogels for therapeutic cardiovascular angiogenesis.

    Science.gov (United States)

    Rufaihah, Abdul Jalil; Seliktar, Dror

    2016-01-15

    Acute myocardial infarction (MI) caused by ischemia is the most common cause of cardiac dysfunction. While growth factor or cell therapy is promising, the retention of bioactive agents in the highly vascularized myocardium is limited and prevents sustained activation needed for adequate cellular responses. Various types of biomaterials with different physical and chemical properties have been developed to improve the localized delivery of growth factor and/or cells for therapeutic angiogenesis in ischemic tissues. Hydrogels are particularly advantageous as carrier systems because they are structurally similar to the tissue extracellular matrix (ECM), they can be processed under relatively mild conditions and can be delivered in a minimally invasive manner. Moreover, hydrogels can be designed to degrade in a timely fashion that coincides with the angiogenic process. For these reasons, hydrogels have shown great potential as pro-angiogenic matrices. This paper reviews a few of the hydrogel systems currently being applied together with growth factor delivery and/or cell therapy to promote therapeutic angiogenesis in ischemic tissues, with emphasis on myocardial applications.

  14. Peptide hydrogelation triggered by enzymatic induced pH switch

    Science.gov (United States)

    Cheng, Wei; Li, Ying

    2016-07-01

    It remains challenging to develop methods that can precisely control the self-assembling kinetics and thermodynamics of peptide hydrogelators to achieve hydrogels with optimal properties. Here we report the hydrogelation of peptide hydrogelators by an enzymatically induced pH switch, which involves the combination of glucose oxidase and catalase with D-glucose as the substrate, in which both the gelation kinetics and thermodynamics can be controlled by the concentrations of D-glucose. This novel hydrogelation method could result in hydrogels with higher mechanical stability and lower hydrogelation concentrations. We further illustrate the application of this hydrogelation method to differentiate different D-glucose levels.

  15. Uniform-droplet spray forming

    Energy Technology Data Exchange (ETDEWEB)

    Blue, C.A.; Sikka, V.K. [Oak Ridge National Lab., TN (United States); Chun, Jung-Hoon [Massachusetts Institute of Technology, Cambridge, MA (United States); Ando, T. [Tufts Univ., Medford, MA (United States)

    1997-04-01

    The uniform-droplet process is a new method of liquid-metal atomization that results in single droplets that can be used to produce mono-size powders or sprayed-on to substrates to produce near-net shapes with tailored microstructure. The mono-sized powder-production capability of the uniform-droplet process also has the potential of permitting engineered powder blends to produce components of controlled porosity. Metal and alloy powders are commercially produced by at least three different methods: gas atomization, water atomization, and rotating disk. All three methods produce powders of a broad range in size with a very small yield of fine powders with single-sized droplets that can be used to produce mono-size powders or sprayed-on substrates to produce near-net shapes with tailored microstructures. The economical analysis has shown the process to have the potential of reducing capital cost by 50% and operating cost by 37.5% when applied to powder making. For the spray-forming process, a 25% savings is expected in both the capital and operating costs. The project is jointly carried out at Massachusetts Institute of Technology (MIT), Tuffs University, and Oak Ridge National Laboratory (ORNL). Preliminary interactions with both finished parts and powder producers have shown a strong interest in the uniform-droplet process. Systematic studies are being conducted to optimize the process parameters, understand the solidification of droplets and spray deposits, and develop a uniform-droplet-system (UDS) apparatus appropriate for processing engineering alloys.

  16. An amidated carboxymethylcellulose hydrogel for cartilage regeneration.

    Science.gov (United States)

    Leone, Gemma; Fini, Milena; Torricelli, Paola; Giardino, Roberto; Barbucci, Rolando

    2008-08-01

    An amidic derivative of carboxymethylcellulose was synthesized (CMCA). The new polysaccharide was obtained by converting a large percentage of carboxylic groups ( approximately 50%) of carboxymethylcellulose into amidic groups rendering the macromolecule quite similar to hyaluronan. Then, the polysaccharide (CMCA) was crosslinked. The behavior of CMCA hydrogel towards normal human articular chondrocytes (NHAC) was in vitro studied monitoring the cell proliferation and synthesis of extra cellular matrix (ECM) components and compared with a hyaluronan based hydrogel (Hyal). An extracellular matrix rich in cartilage-specific collagen and proteoglycans was secreted in the presence of hydrogels. The injectability of the new hydrogels was also analysed. An experimental in vivo model was realized to study the effect of CMCA and Hyal hydrogels in the treatment of surgically created partial thickness chondral defects in the rabbit knee. The preliminary results pointed out that CMCA hydrogel could be considered as a potential compound for cartilage regeneration.

  17. Hydrogels for Engineering of Perfusable Vascular Networks.

    Science.gov (United States)

    Liu, Juan; Zheng, Huaiyuan; Poh, Patrina S P; Machens, Hans-Günther; Schilling, Arndt F

    2015-07-14

    Hydrogels are commonly used biomaterials for tissue engineering. With their high-water content, good biocompatibility and biodegradability they resemble the natural extracellular environment and have been widely used as scaffolds for 3D cell culture and studies of cell biology. The possible size of such hydrogel constructs with embedded cells is limited by the cellular demand for oxygen and nutrients. For the fabrication of large and complex tissue constructs, vascular structures become necessary within the hydrogels to supply the encapsulated cells. In this review, we discuss the types of hydrogels that are currently used for the fabrication of constructs with embedded vascular networks, the key properties of hydrogels needed for this purpose and current techniques to engineer perfusable vascular structures into these hydrogels. We then discuss directions for future research aimed at engineering of vascularized tissue for implantation.

  18. Injectable, Biodegradable Hydrogels for Tissue Engineering Applications

    Directory of Open Access Journals (Sweden)

    Huaping Tan

    2010-03-01

    Full Text Available Hydrogels have many different applications in the field of regenerative medicine. Biodegradable, injectable hydrogels could be utilized as delivery systems, cell carriers, and scaffolds for tissue engineering. Injectable hydrogels are an appealing scaffold because they are structurally similar to the extracellular matrix of many tissues, can often be processed under relatively mild conditions, and may be delivered in a minimally invasive manner. This review will discuss recent advances in the field of injectable hydrogels, including both synthetic and native polymeric materials, which can be potentially used in cartilage and soft tissue engineering applications.

  19. Photocrosslinkable Gelatin Hydrogel for Epidermal Tissue Engineering.

    Science.gov (United States)

    Zhao, Xin; Lang, Qi; Yildirimer, Lara; Lin, Zhi Yuan; Cui, Wenguo; Annabi, Nasim; Ng, Kee Woei; Dokmeci, Mehmet R; Ghaemmaghami, Amir M; Khademhosseini, Ali

    2016-01-01

    Natural hydrogels are promising scaffolds to engineer epidermis. Currently, natural hydrogels used to support epidermal regeneration are mainly collagen- or gelatin-based, which mimic the natural dermal extracellular matrix but often suffer from insufficient and uncontrollable mechanical and degradation properties. In this study, a photocrosslinkable gelatin (i.e., gelatin methacrylamide (GelMA)) with tunable mechanical, degradation, and biological properties is used to engineer the epidermis for skin tissue engineering applications. The results reveal that the mechanical and degradation properties of the developed hydrogels can be readily modified by varying the hydrogel concentration, with elastic and compressive moduli tuned from a few kPa to a few hundred kPa, and the degradation times varied from a few days to several months. Additionally, hydrogels of all concentrations displayed excellent cell viability (>90%) with increasing cell adhesion and proliferation corresponding to increases in hydrogel concentrations. Furthermore, the hydrogels are found to support keratinocyte growth, differentiation, and stratification into a reconstructed multilayered epidermis with adequate barrier functions. The robust and tunable properties of GelMA hydrogels suggest that the keratinocyte laden hydrogels can be used as epidermal substitutes, wound dressings, or substrates to construct various in vitro skin models.

  20. Walking droplets in linear channels

    Science.gov (United States)

    Filoux, Boris; Hubert, Maxime; Schlagheck, Peter; Vandewalle, Nicolas

    2017-01-01

    When a droplet is placed onto a vertically vibrated bath, it can bounce without coalescing. Upon an increase of the forcing acceleration, the droplet is propelled by the wave it generates and becomes a walker with a well-defined speed. We investigate the confinement of a walker in different rectangular cavities, used as waveguides for the Faraday waves emitted by successive droplet bounces. By studying the walker velocities, we discover that one-dimensional confinement is optimal for narrow channels of width of D ≃1.5 λF . Thereby, the walker follows a quasilinear path. We also propose an analogy with waveguide models based on the observation of the Faraday instability within the channels.

  1. Snell's law and walking droplets

    Science.gov (United States)

    Bush, John; Pucci, Giuseppe; Aubin, Benjamin; Brun, Pierre-Thomas; Faria, Luiz

    2016-11-01

    Droplets walking on the surface of a vibrating bath have been shown to exhibit a number of quantum-like features. We here present the results of a combined experimental and theoretical investigation of such droplets crossing a linear step corresponding to a reduction in bath depth. When the step is sufficiently large, the walker reflects off the step; otherwise, it is refracted as it crosses the step. Particular attention is given to an examination of the regime in which the droplet obeys a form of Snell's Law, a behavior captured in accompanying simulations. Attempts to provide theoretical rationale for the dependence of the effective refractive index on the system parameters are described. Supported by NSF through CMMI-1333242.

  2. Soft substrates suppress droplet splashing

    CERN Document Server

    Howland, Christopher J; Style, Robert W; Castrejón-Pita, A A

    2015-01-01

    Droplets splash when they impact dry, flat substrates above a critical velocity that depends on parameters such as droplet size, viscosity and air pressure. We show that substrate stiffness also impacts the splashing threshold by imaging ethanol drops impacting silicone gels of different stiffnesses. Splashing is significantly suppressed: droplets on the softest substrates need over 70% more kinetic energy to splash than they do on rigid substrates. We show that splash suppression is likely to be due to energy losses caused by deformations of soft substrates during the first few microseconds of impact. We find that solids with Youngs modulus $\\lesssim O(10^5)$Pa suppress splashing, in agreement with simple scaling arguments. Thus materials like soft gels and elastomers can be used as simple coatings for effective splash prevention.

  3. Evaporation of elongated droplets on chemically stripe-patterned surfaces

    NARCIS (Netherlands)

    Jansen, H.P.; Zandvliet, H.J.W.; Kooij, E.S.

    2015-01-01

    We investigate the evaporation of elongated droplets on chemically striped patterned surfaces. Variation of elongation is achieved by depositing droplets on surfaces with varying ratios of hydrophobic and hydrophilic stripe widths. Elongated droplets evaporate faster than more spherical droplets. Bo

  4. Film boiling of mercury droplets

    Science.gov (United States)

    Baumeister, K. J.; Schoessow, G. J.; Chmielewski, C. E.

    1975-01-01

    Vaporization times of mercury droplets in Leidenfrost film boiling on a flat horizontal plate are measured in an air atmosphere. Extreme care was used to prevent large amplitude droplet vibrations and surface wetting; therefore, these data can be compared to film boiling theory. For these data, diffusion from the upper surface of the drop is a dominant mode of mass transfer from the drop. A closed-form analytical film boiling theory is developed to account for the diffusive evaporation. Reasonable agreement between data and theory is seen.

  5. Materials science: Droplets leap into action

    Science.gov (United States)

    Vollmer, Doris; Butt, Hans-Jürgen

    2015-11-01

    What could cause a water droplet to start bouncing on a surface? It seems that a combination of evaporation and a highly water-repellent surface induces droplet bouncing when ambient pressure is reduced. See Letter p.82

  6. Droplet migration characteristics in confined oscillatory microflows

    CERN Document Server

    Chaudhury, Kaustav; Chakraborty, Suman

    2015-01-01

    We analyze the migration characteristics of a droplet in an oscillatory flow field in a parallel plate micro-confinement. Using phase filed formalism, we capture the dynamical evolution of the droplet over a wide range of the frequency of the imposed oscillation in the flow field, drop size relative to the channel gap, and the capillary number. The latter two factors imply the contribution of droplet deformability, commonly considered in the study of droplet migration under steady shear flow conditions. We show that the imposed oscillation brings in additional time complexity in the droplet movement, realized through temporally varying drop-shape, flow direction and the inertial response of the droplet. As a consequence, we observe a spatially complicated pathway of the droplet along the transverse direction, in sharp contrast to the smooth migration under a similar yet steady shear flow condition. Intuitively, the longitudinal component of the droplet movement is in tandem with the flow continuity and evolve...

  7. Bundle Formation in Biomimetic Hydrogels.

    Science.gov (United States)

    Jaspers, Maarten; Pape, A C H; Voets, Ilja K; Rowan, Alan E; Portale, Giuseppe; Kouwer, Paul H J

    2016-08-08

    Bundling of single polymer chains is a crucial process in the formation of biopolymer network gels that make up the extracellular matrix and the cytoskeleton. This bundled architecture leads to gels with distinctive properties, including a large-pore-size gel formation at very low concentrations and mechanical responsiveness through nonlinear mechanics, properties that are rarely observed in synthetic hydrogels. Using small-angle X-ray scattering (SAXS), we study the bundle formation and hydrogelation process of polyisocyanide gels, a synthetic material that uniquely mimics the structure and mechanics of biogels. We show how the structure of the material changes at the (thermally induced) gelation point and how factors such as concentration and polymer length determine the architecture, and with that, the mechanical properties. The correlation of the gel mechanics and the structural parameters obtained from SAXS experiments is essential in the design of future (synthetic) mimics of biopolymer networks.

  8. Fewer Bacteria Adhere to Softer Hydrogels.

    Science.gov (United States)

    Kolewe, Kristopher W; Peyton, Shelly R; Schiffman, Jessica D

    2015-09-01

    Clinically, biofilm-associated infections commonly form on intravascular catheters and other hydrogel surfaces. The overuse of antibiotics to treat these infections has led to the spread of antibiotic resistance and underscores the importance of developing alternative strategies that delay the onset of biofilm formation. Previously, it has been reported that during surface contact, bacteria can detect surfaces through subtle changes in the function of their motors. However, how the stiffness of a polymer hydrogel influences the initial attachment of bacteria is unknown. Systematically, we investigated poly(ethylene glycol) dimethacrylate (PEGDMA) and agar hydrogels that were 20 times thicker than the cumulative size of bacterial cell appendages, as a function of Young's moduli. Soft (44.05-308.5 kPa), intermediate (1495-2877 kPa), and stiff (5152-6489 kPa) hydrogels were synthesized. Escherichia coli and Staphylococcus aureus attachment onto the hydrogels was analyzed using confocal microscopy after 2 and 24 h incubation periods. Independent of hydrogel chemistry and incubation time, E. coli and S. aureus attachment correlated positively to increasing hydrogel stiffness. For example, after a 24 h incubation period, there were 52 and 82% fewer E. coli adhered to soft PEGDMA hydrogels than to the intermediate and stiff PEGDMA hydrogels, respectively. A 62 and 79% reduction in the area coverage by the Gram-positive microbe S. aureus occurred after 24 h incubation on the soft versus intermediate and stiff PEGDMA hydrogels. We suggest that hydrogel stiffness is an easily tunable variable that could potentially be used synergistically with traditional antimicrobial strategies to reduce early bacterial adhesion and therefore the occurrence of biofilm-associated infections.

  9. Fewer Bacteria Adhere to Softer Hydrogels

    Science.gov (United States)

    Kolewe, Kristopher W.; Peyton, Shelly R.; Schiffman, Jessica D.

    2015-01-01

    Clinically, biofilm-associated infections commonly form on intravascular catheters and other hydrogel surfaces. The overuse of antibiotics to treat these infections has led to the spread of antibiotic resistance and underscores the importance of developing alternative strategies that delay the onset of biofilm formation. Previously, it has been reported that during surface contact, bacteria can detect surfaces through subtle changes in the function of their motors. However, how the stiffness of a polymer hydrogel influences the initial attachment of bacteria is unknown. Systematically, we investigated poly(ethylene glycol) dimethacrylate (PEGDMA) and agar hydrogels that were twenty times thicker than the cumulative size of bacterial cell appendages, as a function of Young’s moduli. Soft (44.05 – 308.5 kPa), intermediate (1495 – 2877 kPa), and stiff (5152 – 6489 kPa) hydrogels were synthesized. Escherichia coli and Staphylococcus aureus attachment onto the hydrogels was analyzed using confocal microscopy after 2 and 24 hr incubation periods. Independent of hydrogel chemistry and incubation time, E. coli and S. aureus attachment correlated positively to increasing hydrogel stiffness. For example, after a 24 hr incubation period, there were 52% and 82% less E. coli adhered to soft PEGDMA hydrogels, than to the intermediate and stiff PEGDMA hydrogels, respectively. A 62% and 79% reduction in the area coverage by the Gram-positive microbe S. aureus occurred after 24 hr incubation on the soft versus intermediate and stiff PEGDMA hydrogels. We suggest that hydrogel stiffness is an easily tunable variable that, potentially, could be used synergistically with traditional antimicrobial strategies to reduce early bacterial adhesion, and therefore the occurrence of biofilm-associated infections. PMID:26291308

  10. Mechanical vibrations of pendant liquid droplets

    OpenAIRE

    Temperton, Robert H.; Smith, Michael I.; Sharp, James S.

    2015-01-01

    A simple optical deflection technique was used to monitor the vibrations of microlitre pendant droplets of deuterium oxide, formamide, and 1,1,2,2-tetrabromoethane. Droplets of different volumes of each liquid were suspended from the end of a microlitre pipette and vibrated using a small puff of nitrogen gas. A laser was passed through the droplets and the scattered light was collected using a photodiode. Vibration of the droplets resulted in the motion of the scattered beam and time-dependen...

  11. Bioprinting of 3D hydrogels.

    Science.gov (United States)

    Stanton, M M; Samitier, J; Sánchez, S

    2015-08-07

    Three-dimensional (3D) bioprinting has recently emerged as an extension of 3D material printing, by using biocompatible or cellular components to build structures in an additive, layer-by-layer methodology for encapsulation and culture of cells. These 3D systems allow for cell culture in a suspension for formation of highly organized tissue or controlled spatial orientation of cell environments. The in vitro 3D cellular environments simulate the complexity of an in vivo environment and natural extracellular matrices (ECM). This paper will focus on bioprinting utilizing hydrogels as 3D scaffolds. Hydrogels are advantageous for cell culture as they are highly permeable to cell culture media, nutrients, and waste products generated during metabolic cell processes. They have the ability to be fabricated in customized shapes with various material properties with dimensions at the micron scale. 3D hydrogels are a reliable method for biocompatible 3D printing and have applications in tissue engineering, drug screening, and organ on a chip models.

  12. Floating Droplet Array: An Ultrahigh-Throughput Device for Droplet Trapping, Real-time Analysisand Recovery

    Directory of Open Access Journals (Sweden)

    Louai Labanieh

    2015-09-01

    Full Text Available We describe the design, fabrication and use of a dual-layered microfluidic device for ultrahigh-throughput droplet trapping, analysis, and recovery using droplet buoyancy. To demonstrate the utility of this device for digital quantification of analytes, we quantify the number of droplets, which contain a β-galactosidase-conjugated bead among more than 100,000 immobilized droplets. In addition, we demonstrate that this device can be used for droplet clustering and real-time analysis by clustering several droplets together into microwells and monitoring diffusion of fluorescein, a product of the enzymatic reaction of β-galactosidase and its fluorogenic substrate FDG, between droplets.

  13. Switchable antimicrobial and antifouling hydrogels with enhanced mechanical properties.

    Science.gov (United States)

    Cao, Bin; Tang, Qiong; Li, Linlin; Humble, Jayson; Wu, Haiyan; Liu, Lingyun; Cheng, Gang

    2013-08-01

    New switchable hydrogels are developed. Under acidic conditions, hydrogels undergo self-cyclization and can catch and kill bacteria. Under neutral/basic conditions, hydrogels undergo ring-opening and can release killed bacterial cells and resist protein adsorption and bacterial attachment. Smart hydrogels also show a dramatically improved mechanical property, which is highly desired for biomedical applications.

  14. Rapid Self-Integrating, Injectable Hydrogel for Tissue Complex Regeneration.

    Science.gov (United States)

    Hou, Sen; Wang, Xuefei; Park, Sean; Jin, Xiaobing; Ma, Peter X

    2015-07-15

    A novel rapid self-integrating, injectable, and bioerodible hydrogel is developed for bone-cartilage tissue complex regeneration. The hydrogels are able to self-integrate to form various structures, as can be seen after dying some hydrogel disks pink with rodamine. This hydrogel is demonstrated to engineer cartilage-bone complex.

  15. Droplet size influences division of mammalian cell factories in droplet microfluidic cultivation

    DEFF Research Database (Denmark)

    Periyannan Rajeswari, Prem Kumar; Joensson, Haakan N.; Svahn, Helene Andersson

    2017-01-01

    The potential of using droplet microfluidics for screening mammalian cell factories has been limited by the difficulty in achieving continuous cell division during cultivation in droplets. Here, we report the influence of droplet size on mammalian cell division and viability during cultivation......, making them a more suitable droplet size for 72-h cultivation. This study shows a direct correlation of microfluidic droplet size to the division and viability of mammalian cells. This highlights the importance of selecting suitable droplet size for mammalian cell factory screening assays....... in droplets. Chinese Hamster Ovary (CHO) cells, the most widely used mammalian host cells for biopharmaceuticals production were encapsulated and cultivated in 33, 180 and 320 pL droplets for 3 days. Periodic monitoring of the droplets during incubation showed that the cell divisions in 33 pL droplets stopped...

  16. Droplet based cavities and lasers

    DEFF Research Database (Denmark)

    Mølhave, Kristian; Kristensen, Anders; Mortensen, Asger

    2009-01-01

    The self-organized and molecularly smooth surface on liquid microdroplets makes them attractive as optical cavities with very high quality factors. This chapter describes the basic theory of optical modes in spherical droplets. The mechanical properties including vibrational excitation are also d...

  17. Salt stains from evaporating droplets

    NARCIS (Netherlands)

    Shahidzadeh, N.; Schut, M.F.L.; Desarnaud, J.; Prat, M.; Bonn, D.

    2015-01-01

    The study of the behavior of sessile droplets on solid substrates is not only associated with common everyday phenomena, such as the coffee stain effect, limescale deposits on our bathroom walls, but also very important in many applications such as purification of pharmaceuticals, deicing of airplan

  18. Droplets, Bubbles and Ultrasound Interactions

    NARCIS (Netherlands)

    Shpak, O.; Verweij, M.; Jong, de N.; Versluis, M.; Escoffre, J.M.; Bouakaz, A.

    2016-01-01

    The interaction of droplets and bubbles with ultrasound has been studied extensively in the last 25 years. Microbubbles are broadly used in diagnostic and therapeutic medical applications, for instance, as ultrasound contrast agents. They have a similar size as red blood cells, and thus are able to

  19. Hydrogels with micellar hydrophobic (nano)domains

    Science.gov (United States)

    Pekař, Miloslav

    2014-12-01

    Hydrogels containing hydrophobic domains or nanodomains, especially of the micellar type, are reviewed. Examples of the reasons for introducing hydrophobic domains into hydrophilic gels are given; typology of these materials is introduced. Synthesis routes are exemplified and properties of a variety of such hydrogels in relation with their intended applications are described. Future research needs are identified briefly.

  20. Photopatterning of hydrogel microarryas in closed microchips

    NARCIS (Netherlands)

    Gumuscu, Burcu; Bomer, Johan G.; Berg, van den Albert; Eijkel, Jan C.T.

    2015-01-01

    To date, optical lithography has been extensively used for in situ patterning of hydrogel structures in a scale range from hundreds of microns to a few millimeters. The two main limitations which prevent smaller feature sizes of hydrogel structures are (1) the upper glass layer of a microchip mainta

  1. Hydrogels with Micellar Hydrophobic (Nano)Domains

    OpenAIRE

    Pekař, Miloslav

    2015-01-01

    Hydrogels containing hydrophobic domains or nanodomains, especially of the micellar type, are reviewed. Examples of the reasons for introducing hydrophobic domains into hydrophilic gels are given; typology of these materials is introduced. Synthesis routes are exemplified and properties of a variety of such hydrogels in relation with their intended applications are described. Future research needs are identified briefly.

  2. Hydrogels with micellar hydrophobic (nano)domains

    OpenAIRE

    Miloslav ePekař

    2015-01-01

    Hydrogels containing hydrophobic domains or nanodomains, especially of the micellar type, are reviewed. Examples of the reasons for introducing hydrophobic domains into hydrophilic gels are given; typology of these materials is introduced. Synthesis routes are exemplified and properties of a variety of such hydrogels in relation with their intended applications are described. Future research needs are identified briefly.

  3. Flexible hydrogel-based functional composite materials

    Science.gov (United States)

    Song, Jie; Saiz, Eduardo; Bertozzi, Carolyn R; Tomasia, Antoni P

    2013-10-08

    A composite having a flexible hydrogel polymer formed by mixing an organic phase with an inorganic composition, the organic phase selected from the group consisting of a hydrogel monomer, a crosslinker, a radical initiator, and/or a solvent. A polymerization mixture is formed and polymerized into a desired shape and size.

  4. Soy-based Hydrogels for Biomedical Applications

    Science.gov (United States)

    Soy based hydrogels were prepared by ring-opening polymerization of epoxidized soybean oil, following hydrolysis of formed polymers. The hydrogels were evaluated loading and releasing water-soluble anticancer drug doxorubin (Dox). The results suggest that this new system offers a great potential t...

  5. Design of Hydrogels for Biomedical Applications.

    Science.gov (United States)

    Kamata, Hiroyuki; Li, Xiang; Chung, Ung-Il; Sakai, Takamasa

    2015-11-18

    Hydrogels are considered key tools for the design of biomaterials, such as wound dressings, drug reservoirs, and temporary scaffolds for cells. Despite their potential, conventional hydrogels have limited applicability under wet physiological conditions because they suffer from the uncontrollable temporal change in shape: swelling takes place immediately after the installation. Swollen hydrogels easily fail under mechanical stress. The morphological change may cause not only the slippage from the installation site but also local nerve compression. The design of hydrogels that can retain their original shape and mechanical properties in an aqueous environment is, therefore, of great importance. On the one hand, the controlled degradation of used hydrogels has to be realized in some biomedical applications. This Progress Report provides a brief overview of the recent progress in the development of hydrogels for biomedical applications. Practical approaches to control the swelling properties of hydrogels are discussed. The designs of hydrogels with controlled degradation properties as well as the theoretical models to predict the degradation behavior are also introduced. Moreover, current challenges and limitation toward biomedical applications are discussed, and future directions are offered.

  6. Dispensing pico to nanolitre of a natural hydrogel by laser-assisted bioprinting

    Directory of Open Access Journals (Sweden)

    Deiwick Andrea

    2011-03-01

    Full Text Available Abstract Background Laser-assisted bioprinting of multi-cellular replicates in accordance with CAD blueprint may substantially improve our understandings of fundamental aspects of 3 D cell-cell and cell-matrix interactions in vitro. For predictable printing results, a profound knowledge about effects of different processing parameters is essential for realisation of 3 D cell models with well-defined cell densities. Methods Time-resolved imaging of the hydrogel jet dynamics and quantitative assessment of the dependence of printed droplet diameter on the process characteristics were conducted. Results The existence of a counterjet was visualised, proving the bubble collapsing theory for the jet formation. Furthermore, by adjusting the viscosity and height of the applied hydrogel layer in combination with different laser pulse energies, the printing of volumes in the range of 10 to 7000 picolitres was demonstrated. Additionally, the relationship between the viscosity and the layer thickness at different laser pulse energies on the printed droplet volume was identified. Conclusions These findings are essential for the advancement of laser-assisted bioprinting by enabling predictable printing results and the integration of computational methods in the generation of 3 D multi-cellular constructs.

  7. Cellulose/polyvinyl alcohol-based hydrogels for reconfigurable lens

    Science.gov (United States)

    Jayaramudu, T.; Ko, Hyun-U.; Gao, Xiaoyuan; Li, Yaguang; Kim, Sang Youn; Kim, Jaehwan

    2016-04-01

    Electroactive hydrogels are attractive for soft robotics and reconfigurable lens applications. Here we describe the design and fabrication of cellulose-poly vinyl alcohol based hydrogels. The fabricated hydrogels were confirmed by Fourier transformer spectroscopy, swelling studies, thermal analysis, surface morphology of fabricated hydrogel was study by using scanning electron microscopy. The effect of poly vinyl alcohol concentration on the optical and electrical behavior of hydrogels was studied.

  8. Thermophoresis of water droplets inside carbon nanotubes

    Science.gov (United States)

    Zambrano, Harvey; Walther, Jh; Oyarzua, Elton; Rojano, Andres

    2016-11-01

    Carbon Nanotubes (CNTs) offer unique possibilities as fluid conduits with applications ranging from lab on a chip devices to encapsulation media for drug delivery. CNTs feature high mechanical strength, chemical and thermal stability and biocompatibility therefore they are promising candidates for nanodevice fabrication. Thermal gradients have been proposed as mechanism to drive particles, fullerenes and droplets inside CNTs. Here, by conducting Molecular Dynamics (MD) simulations, we study thermophoresis of water droplets inside CNTs. We systematically change the size of the droplets, the axial thermal gradient and CNT chirality. We find that the droplet motion in the armchair CNTs exhibits two clearly delimited stages, a regime wherein the droplet is accelerated and subsequently, a regime wherein the droplet moves with constant velocity. Inside the zig zag CNTs, the droplet accelerates during a very short time and then it moves with constant velocity. We compute the net force during the droplet acceleration and find a correlation between the droplet acceleration and the magnitude of the thermal gradient without any dependence on the droplet size. Moreover, we conduct velocity constrained MD simulations to determine the friction and thermophoretic forces acting on the droplet. We acknowledge partial funding from FONDECYT through the Project No. 11130559 and from VRID Universidad de Concepcion.

  9. Dynamics of droplet motion under electrowetting actuation.

    Science.gov (United States)

    Annapragada, S Ravi; Dash, Susmita; Garimella, Suresh V; Murthy, Jayathi Y

    2011-07-05

    The static shape of droplets under electrowetting actuation is well understood. The steady-state shape of the droplet is obtained on the basis of the balance of surface tension and electrowetting forces, and the change in the apparent contact angle is well characterized by the Young-Lippmann equation. However, the transient droplet shape behavior when a voltage is suddenly applied across a droplet has received less attention. Additional dynamic frictional forces are at play during this transient process. We present a model to predict this transient behavior of the droplet shape under electrowetting actuation. The droplet shape is modeled using the volume of fluid method. The electrowetting and dynamic frictional forces are included as an effective dynamic contact angle through a force balance at the contact line. The model is used to predict the transient behavior of water droplets on smooth hydrophobic surfaces under electrowetting actuation. The predictions of the transient behavior of droplet shape and contact radius are in excellent agreement with our experimental measurements. The internal fluid motion is explained, and the droplet motion is shown to initiate from the contact line. An approximate mathematical model is also developed to understand the physics of the droplet motion and to describe the overall droplet motion and the contact line velocities.

  10. Enhanced Droplet Control by Transition Boiling

    Science.gov (United States)

    Grounds, Alex; Still, Richard; Takashina, Kei

    2012-10-01

    A droplet of water on a heated surface can levitate over a film of gas produced by its own evaporation in the Leidenfrost effect. When the surface is prepared with ratchet-like saw-teeth topography, these droplets can self-propel and can even climb uphill. However, the extent to which the droplets can be controlled is limited by the physics of the Leidenfrost effect. Here, we show that transition boiling can be induced even at very high surface temperatures and provide additional control over the droplets. Ratchets with acute protrusions enable droplets to climb steeper inclines while ratchets with sub-structures enable their direction of motion to be controlled by varying the temperature of the surface. The droplets' departure from the Leidenfrost regime is assessed by analysing the sound produced by their boiling. We anticipate these techniques will enable the development of more sophisticated methods for controlling small droplets and heat transfer.

  11. Leidenfrost droplets in an electric field

    Science.gov (United States)

    Wildeman, Sander; Sun, Chao; Lohse, Detlef

    2014-11-01

    In a recent video broadcast dubbed the ``Knitting Needle Experiment,'' astronaut Don Petit aboard the ISS demonstrated how weightless water droplets can be made to orbit a statically charged Teflon rod. We study the earthly analogue of mobile droplets in an electric field, whereby the mobility is ensured by a thin vapor film sustained between the droplet and a hot plate (the Leidenfrost effect). We find that in a strong vertical electric field the droplet starts to bounce progressively higher, defying gravitational attraction. From its trajectory we can deduce the temporal evolution of the charge on the droplet. The measurements show that the charge starts high and then decreases in a step-like manner as the droplet evaporates. The discharge trend is predicted well by treating the droplet as a dielectric sphere in electrical contact with the hot plate, but the mechanism by which definite lumps of charge are transferred through the vapor film is still an open question.

  12. Uptake of water droplets by nonwetting capillaries

    CERN Document Server

    Willmott, Geoff R; Hendy, Shaun C

    2010-01-01

    We present direct experimental evidence that water droplets can spontaneously penetrate non-wetting capillaries, driven by the action of Laplace pressure due to high droplet curvature. Using high-speed optical imaging, microcapillaries of radius 50 to 150 micron, and water microdroplets of average radius between 100 and 1900 micron, we demonstrate that there is a critical droplet radius below which water droplets can be taken up by hydrophobised glass and polytetrafluoroethylene (PTFE) capillaries. The rate of capillary uptake is shown to depend strongly on droplet size, with smaller droplets being absorbed more quickly. Droplet size is also shown to influence meniscus motion in a pre-filled non-wetting capillary, and quantitative measurements of this effect result in a derived water-PTFE static contact angle between 96 degrees and 114 degrees. Our measurements confirm recent theoretical predictions and simulations for metal nanodroplets penetrating carbon nanotubes (CNTs). The results are relevant to a wide ...

  13. Dancing droplets: Autonomous surface tension-driven droplet motion

    OpenAIRE

    Cira, Nate J.; Benusiglio, Adrien; Prakash, Manu

    2014-01-01

    International audience; When droplets of water and food coloring at different concentrations are deposited on a clean glass slide they enter a complex dance. We reproduce this phenomenon by using a two-component mixture of propylene glycol and water deposited on corona treated (Electro-TechnicBD-20AC) glass slides and record the phenomena using a Cannon 5D Mark II camera with a 50mm macro lens

  14. Integrated microfluidic system capable of size-specific droplet generation with size-dependent droplet separation.

    Science.gov (United States)

    Lee, Sangmin; Hong, Seok Jun; Yoo, Hyung Jung; Ahn, Jae Hyun; Cho, Dong-il Dan

    2013-06-01

    Droplet-based microfluidics is receiving much attention in biomedical research area due to its advantage in uniform size droplet generation. Our previous results have reported that droplet size plays an important role in drug delivery actuated by flagellated bacteria. Recently, many research groups have been reported the size-dependent separation of emulsion droplets by a microfluidic system. In this paper, an integrated microfluidic system is proposed to produce and sort specificsized droplets sequentially. Operation of the system relies on two microfluidic transport processes: initial generation of droplets by hydrodynamic focusing and subsequent separation of droplets by a T-junction channel. The microfluidic system is fabricated by the SU-8 rapid prototyping method and poly-di-methyl-siloxane (PDMS) replica molding. A biodegradable polymer, poly-capro-lactone (PCL), is used for the droplet material. Using the proposed integrated microfluidic system, specific-sized droplets which can be delivered by flagellated bacteria are successfully generated and obtained.

  15. Orthogonal Enzymatic Reactions to Control Supramolecular Hydrogelations%Orthogonal Enzymatic Reactions to Control Supramolecular Hydrogelations

    Institute of Scientific and Technical Information of China (English)

    陈国钦; 任春华; 王玲; 徐兵; 杨志谋

    2012-01-01

    Enzyme-responsive hydrogels have great potential in applications of controlled drug release, tissue engineering, etc. In this study, we reported on a supramolecular hydrogel that showed responses to two enzymes, phosphatase which was used to form the hydrogels and esterase which could trigger gelsol phase transitions. The gelation process and visco-elasticity property of the resulting gel, morphology of the nanostructures in hydrogel, and peptide conformation in the self-assembled nanostructure were characterized by theology, transmission electron microscope (TEM), and circular dichroism (CD), respectively. Potential application of the enzyme-responsive hydrogel in drug release was also demonstrated in this study. Though only one potential application of drug release was proved in this study, the responsive hydrogel system in this study might have potentials for the applications in fields of cell culture, controlled-drug release, etc.

  16. Walking droplets in confined geometries

    Science.gov (United States)

    Filoux, Boris; Mathieu, Olivier; Vandewalle, Nicolas

    2014-11-01

    When gently placing a droplet onto a vertically vibrated bath, coalescence may be avoided: the drop bounces permanently. Upon increasing forcing acceleration, a drop interacts with the wave it generates, and becomes a ``walker'' with a well defined velocity. In this work, we investigate the confinement of a walker in a mono-dimensional geometry. The system consists of linear submarine channels used as waveguides for a walker. By studying the dynamics of walkers in those channels, we discover some 1D-2D transition. We also propose a model based on an analogy with ``Quantum Wires.'' Finally, we consider the situation of a walker in a circular submarine channel, and examine the behavior of several walking droplets in this system. We show the quantization of the drop distances, and correlate it to their bouncing modes.

  17. Shape-Shifting Droplet Networks

    Science.gov (United States)

    Zhang, T.; Wan, Duanduan; Schwarz, J. M.; Bowick, M. J.

    2016-03-01

    We consider a three-dimensional network of aqueous droplets joined by single lipid bilayers to form a cohesive, tissuelike material. The droplets in these networks can be programed to have distinct osmolarities so that osmotic gradients generate internal stresses via local fluid flows to cause the network to change shape. We discover, using molecular dynamics simulations, a reversible folding-unfolding process by adding an osmotic interaction with the surrounding environment which necessarily evolves dynamically as the shape of the network changes. This discovery is the next important step towards osmotic robotics in this system. We also explore analytically and numerically how the networks become faceted via buckling and how quasi-one-dimensional networks become three dimensional.

  18. RF-interrogatable hydrogel-actuated biosensor

    Energy Technology Data Exchange (ETDEWEB)

    Hoel, Z; Wang, A W; Darrow, C B; Lee, A P; McConaghy, C F; Krulevitch, P; Gilman, A; Satcher, J H; Lane, S M

    2000-01-10

    The authors present a novel micromachined sensor that couples a swellable hydrogel with capacitive detection. The hydrogel swells in response to analyte concentration, exerting contact pressure on a deformable conducting membrane. Results are presented for characterization of a PHEMA hydrogel swelling in response to a calcium nitrate solution. Pressure-deflection measurements are performed on NiTi-based membranes. Hydrogel-actuated deflections of the membranes are measured. These measurements are correlated to determine the pressure generating characteristics of the hydrogel. Membrane deflection techniques have not previously been employed for hydrogel characterization. The PHEMA sample exhibited greatest sensitivity in the pH range of 6.0--6.5 and performed an average of 2.8 Joules of work per m{sup 3} per pH unit in response to ambient conditions over the pH range 3.5--6.5. The membrane deflections correspond to capacitive shifts of about 4 pF per pH unit for a capacitive transducer with initial gap of 100 {micro}m, capacitor plate area of 18.5 mm{sup 2} , and initial hydrogel volume of 11 {micro}L.

  19. Designing hydrogels for controlled drug delivery

    Science.gov (United States)

    Li, Jianyu; Mooney, David J.

    2016-12-01

    Hydrogel delivery systems can leverage therapeutically beneficial outcomes of drug delivery and have found clinical use. Hydrogels can provide spatial and temporal control over the release of various therapeutic agents, including small-molecule drugs, macromolecular drugs and cells. Owing to their tunable physical properties, controllable degradability and capability to protect labile drugs from degradation, hydrogels serve as a platform on which various physiochemical interactions with the encapsulated drugs occur to control drug release. In this Review, we cover multiscale mechanisms underlying the design of hydrogel drug delivery systems, focusing on physical and chemical properties of the hydrogel network and the hydrogel-drug interactions across the network, mesh and molecular (or atomistic) scales. We discuss how different mechanisms interact and can be integrated to exert fine control in time and space over drug presentation. We also collect experimental release data from the literature, review clinical translation to date of these systems and present quantitative comparisons between different systems to provide guidelines for the rational design of hydrogel delivery systems.

  20. Photopatterning of Hydrogel Microarrays in Closed Microchips.

    Science.gov (United States)

    Gumuscu, Burcu; Bomer, Johan G; van den Berg, Albert; Eijkel, Jan C T

    2015-12-14

    To date, optical lithography has been extensively used for in situ patterning of hydrogel structures in a scale range from hundreds of microns to a few millimeters. The two main limitations which prevent smaller feature sizes of hydrogel structures are (1) the upper glass layer of a microchip maintains a large spacing (typically 525 μm) between the photomask and hydrogel precursor, leading to diffraction of UV light at the edges of mask patterns, (2) diffusion of free radicals and monomers results in irregular polymerization near the illumination interface. In this work, we present a simple approach to enable the use of optical lithography to fabricate hydrogel arrays with a minimum feature size of 4 μm inside closed microchips. To achieve this, we combined two different techniques. First, the upper glass layer of the microchip was thinned by mechanical polishing to reduce the spacing between the photomask and hydrogel precursor, and thereby the diffraction of UV light at the edges of mask patterns. The polishing process reduces the upper layer thickness from ∼525 to ∼100 μm, and the mean surface roughness from 20 to 3 nm. Second, we developed an intermittent illumination technique consisting of short illumination periods followed by relatively longer dark periods, which decrease the diffusion of monomers. Combination of these two methods allows for fabrication of 0.4 × 10(6) sub-10 μm sized hydrogel patterns over large areas (cm(2)) with high reproducibility (∼98.5% patterning success). The patterning method is tested with two different types of photopolymerizing hydrogels: polyacrylamide and polyethylene glycol diacrylate. This method enables in situ fabrication of well-defined hydrogel patterns and presents a simple approach to fabricate 3-D hydrogel matrices for biomolecule separation, biosensing, tissue engineering, and immobilized protein microarray applications.

  1. Vortices catapult droplets in atomization

    Science.gov (United States)

    Jerome, J. John Soundar; Marty, Sylvain; Matas, Jean-Philippe; Zaleski, Stéphane; Hoepffner, Jérôme

    2013-11-01

    A droplet ejection mechanism in planar two-phase mixing layers is examined. Any disturbance on the gas-liquid interface grows into a Kelvin-Helmholtz wave, and the wave crest forms a thin liquid film that flaps as the wave grows downstream. Increasing the gas speed, it is observed that the film breaks up into droplets which are eventually thrown into the gas stream at large angles. In a flow where most of the momentum is in the horizontal direction, it is surprising to observe these large ejection angles. Our experiments and simulations show that a recirculation region grows downstream of the wave and leads to vortex shedding similar to the wake of a backward-facing step. The ejection mechanism results from the interaction between the liquid film and the vortex shedding sequence: a recirculation zone appears in the wake of the wave and a liquid film emerges from the wave crest; the recirculation region detaches into a vortex and the gas flow over the wave momentarily reattaches due to the departure of the vortex; this reattached flow pushes the liquid film down; by now, a new recirculation vortex is being created in the wake of the wave—just where the liquid film is now located; the liquid film is blown up from below by the newly formed recirculation vortex in a manner similar to a bag-breakup event; the resulting droplets are catapulted by the recirculation vortex.

  2. Vortices catapult droplets in atomization

    Energy Technology Data Exchange (ETDEWEB)

    Jerome, J. John Soundar, E-mail: soundar@dalembert.upmc.fr; Zaleski, Stéphane; Hoepffner, Jérôme [Institut Jean Le Rond d' Alembert, UPMC Univ. Paris 06 and CNRS-UMR 7190, F-75005 Paris (France); Marty, Sylvain; Matas, Jean-Philippe [Laboratoire des Écoulements Géophysiques et Industriels (LEGI), Univ. Grenoble Alpes and CNRS - UMR 5519, F-38000 Grenoble (France)

    2013-11-15

    A droplet ejection mechanism in planar two-phase mixing layers is examined. Any disturbance on the gas-liquid interface grows into a Kelvin-Helmholtz wave, and the wave crest forms a thin liquid film that flaps as the wave grows downstream. Increasing the gas speed, it is observed that the film breaks up into droplets which are eventually thrown into the gas stream at large angles. In a flow where most of the momentum is in the horizontal direction, it is surprising to observe these large ejection angles. Our experiments and simulations show that a recirculation region grows downstream of the wave and leads to vortex shedding similar to the wake of a backward-facing step. The ejection mechanism results from the interaction between the liquid film and the vortex shedding sequence: a recirculation zone appears in the wake of the wave and a liquid film emerges from the wave crest; the recirculation region detaches into a vortex and the gas flow over the wave momentarily reattaches due to the departure of the vortex; this reattached flow pushes the liquid film down; by now, a new recirculation vortex is being created in the wake of the wave—just where the liquid film is now located; the liquid film is blown up from below by the newly formed recirculation vortex in a manner similar to a bag-breakup event; the resulting droplets are catapulted by the recirculation vortex.

  3. Grating droplets with a mesh

    Science.gov (United States)

    Soto, Dan; Le Helloco, Antoine; Clanet, Cristophe; Quere, David; Varanasi, Kripa

    2016-11-01

    A drop thrown against a mesh can pass through its holes if impacting with enough inertia. As a result, although part of the droplet may remain on one side of the sieve, the rest will end up grated through the other side. This inexpensive method to break up millimetric droplets into micrometric ones may be of particular interest in a wide variety of applications: enhancing evaporation of droplets launched from the top of an evaporative cooling tower or preventing drift of pesticides sprayed above crops by increasing their initial size and atomizing them at the very last moment with a mesh. In order to understand how much liquid will be grated we propose in this presentation to start first by studying a simpler situation: a drop impacting a plate pierced with a single off centered hole. The study of the role of natural parameters such as the radius drop and speed or the hole position, size and thickness allows us to discuss then the more general situation of a plate pierced with multiple holes: the mesh.

  4. Bouncing of polymeric droplets on liquid interfaces

    Science.gov (United States)

    Gier, S.; Dorbolo, S.; Terwagne, D.; Vandewalle, N.; Wagner, C.

    2012-12-01

    The effect of polymers on the bouncing behavior of droplets in a highly viscous, vertically shaken silicone oil bath was investigated in this study. Droplets of a sample liquid were carefully placed on a vibrating bath that was maintained well below the threshold of Faraday waves. The bouncing threshold of the plate acceleration depended on the acceleration frequency. For pure water droplets and droplets of aqueous polymer solutions, a minimum acceleration amplitude was observed in the acceleration threshold curves as a function of frequency. The bouncing acceleration amplitude for a droplet of a dilute aqueous polymer solution was higher than the acceleration amplitude for a pure water droplet. Measurements of the center of mass trajectory and the droplet deformations showed that the controlling parameter in the bouncing process was the oscillating elongational rate of the droplet. This parameter can be directly related to the elongational viscosity of the polymeric samples. The large elongational viscosity of the polymer solution droplets suppressed large droplet deformations, resulting in less chaotic bouncing.

  5. Electrochemical Hydrogel Lithography of Calcium-Alginate Hydrogels for Cell Culture

    Directory of Open Access Journals (Sweden)

    Fumisato Ozawa

    2016-08-01

    Full Text Available Here we propose a novel electrochemical lithography methodology for fabricating calcium-alginate hydrogels having controlled shapes. We separated the chambers for Ca2+ production and gel formation with alginate with a semipermeable membrane. Ca2+ formed in the production chamber permeated through the membrane to fabricate a gel structure on the membrane in the gel formation chamber. When the calcium-alginate hydrogels were modified with collagen, HepG2 cells proliferated on the hydrogels. These results show that electrochemical hydrogel lithography is useful for cell culture.

  6. Vibration-induced droplet atomization

    Science.gov (United States)

    Vukasinovic, Bojan

    The atomization of liquid drops is investigated experimentally using laser vibrometry, high-speed imaging, and particle tracking techniques. The spray is generated by a novel vibration-induced droplet atomization (VIDA) process in which a sessile drop is atomized by an underlying vibrating thin metal diaphragm, resulting in rapid ejection of small secondary droplets from the free surface of the primary drop. Under some conditions, the primary drop can be atomized extremely rapidly by a bursting-like mechanism (e.g., a 0.1 ml water drop can be atomized in 0.4 seconds). The present research has focused on four major areas: global characteristics of VIDA process, instability modes and free surface dynamics of the forced drop, mechanisms of the interface breakup, and parametric characterization of the ensuing spray. Prior to atomization, the drop free surface undergoes three transitions: from axisymmetric standing waves to azimuthal waves, to a newly-observed lattice mode, and to a disordered pre-ejection state. The droplet ejection results from localized collapse of surface troughs and initiation and ultimate breakup of momentary liquid spikes. Breakup begins with capillary pinch-off from spike tips and can be followed by additional pinching of liquid droplets. For a relatively low-viscosity liquid, e.g., water, a capillary-wave instability of the spike is observed in some cases, while for a very viscous liquid, e.g., a glycerin/water solution, the first breakup occurs near the stem of the spike, with or without subsequent breakup of the detached, elongated thread. Different mechanisms dominating the primary breakup of the spike are operative in the low- and high-viscosity ejection regimes. When ejection of the secondary droplets is triggered, the evolution and rate of atomization depend on the coupled dynamics of the primary drop and the vibrating diaphragm. Due to these dynamics, the process can be either self-intensifying or self-decaying. The resulting VIDA spray

  7. [Micro-droplet characterization and its application for amino acid detection in droplet microfluidic system].

    Science.gov (United States)

    Yuan, Huiling; Dong, Libing; Tu, Ran; Du, Wenbin; Ji, Shiru; Wang, Qinhong

    2014-01-01

    Recently, the droplet microfluidic system attracts interests due to its high throughput and low cost to detect and screen. The picoliter micro-droplets from droplet microfluidics are uniform with respect to the size and shape, and could be used as monodispensed micro-reactors for encapsulation and detection of single cell or its metabolites. Therefore, it is indispensable to characterize micro-droplet and its application from droplet microfluidic system. We first constructed the custom-designed droplet microfluidic system for generating micro-droplets, and then used the micro-droplets to encapsulate important amino acids such as glutamic acid, phenylalanine, tryptophan or tyrosine to test the droplets' properties, including the stability, diffusivity and bio-compatibility for investigating its application for amino acid detection and sorting. The custom-designed droplet microfluidic system could generate the uniformed micro-droplets with a controllable size between 20 to 50 microm. The micro-droplets could be stable for more than 20 h without cross-contamination or fusion each other. The throughput of detection and sorting of the system is about 600 micro-droplets per minute. This study provides a high-throughput platform for the analysis and screening of amino acid-producing microorganisms.

  8. Fluid displacement during droplet formation at microfluidic flow-focusing junctions.

    Science.gov (United States)

    Huang, Haishui; He, Xiaoming

    2015-11-07

    Microdroplets and microcapsules have been widely produced using microfluidic flow-focusing junctions for biomedical and chemical applications. However, the multiphase microfluidic flow at the flow-focusing junction has not been well investigated. In this study, the displacement of two (core and shell) aqueous fluids that disperse into droplets altogether in a carrier oil emulsion was investigated both numerically and experimentally. It was found that extensive displacement of the two aqueous fluids within the droplet during its formation could occur as a result of the shear effect of the carrier fluid and the capillary effect of interfacial tension. We further identified that the two mechanisms of fluid displacement can be evaluated by two dimensionless parameters. The quantitative relationship between the degree of fluid displacement and these two dimensionless parameters was determined experimentally. Finally, we demonstrated that the degree of fluid displacement could be controlled to generate hydrogel microparticles of different morphologies using planar or nonplanar flow-focusing junctions. These findings should provide useful guidance to the microfluidic production of microscale droplets or capsules for various biomedical and chemical applications.

  9. Fabricating customized hydrogel contact lens

    Science.gov (United States)

    Childs, Andre; Li, Hao; Lewittes, Daniella M.; Dong, Biqin; Liu, Wenzhong; Shu, Xiao; Sun, Cheng; Zhang, Hao F.

    2016-10-01

    Contact lenses are increasingly used in laboratories for in vivo animal retinal imaging and pre-clinical studies. The lens shapes often need modification to optimally fit corneas of individual test subjects. However, the choices from commercially available contact lenses are rather limited. Here, we report a flexible method to fabricate customized hydrogel contact lenses. We showed that the fabricated hydrogel is highly transparent, with refractive indices ranging from 1.42 to 1.45 in the spectra range from 400 nm to 800 nm. The Young’s modulus (1.47 MPa) and hydrophobicity (with a sessile drop contact angle of 40.5°) have also been characterized experimentally. Retinal imaging using optical coherence tomography in rats wearing our customized contact lenses has the quality comparable to the control case without the contact lens. Our method could significantly reduce the cost and the lead time for fabricating soft contact lenses with customized shapes, and benefit the laboratorial-used contact lenses in pre-clinical studies.

  10. Supercritical droplet combustion and related transport phenomena

    Science.gov (United States)

    Yang, Vigor; Hsieh, K. C.; Shuen, J. S.

    1993-01-01

    An overview of recent advances in theoretical analyses of supercritical droplet vaporization and combustion is conducted. Both hydrocarbon and cryogenic liquid droplets over a wide range of thermodynamic states are considered. Various important high-pressure effects on droplet behavior, such as thermodynamic non-ideality, transport anomaly, and property variation, are reviewed. Results indicate that the ambient gas pressure exerts significant control of droplet gasification and burning processes through its influence on fluid transport, gas-liquid interfacial thermodynamics, and chemical reactions. The droplet gasification rate increases progressively with pressure. However, the data for the overall burnout time exhibit a considerable change in the combustion mechanism at the criticl pressure, mainly as a result of reduced mass diffusivity and latent heat of vaporization with increased pressure. The influence of droplet size on the burning characteristics is also noted.

  11. Electroporation of cells in microfluidic droplets.

    Science.gov (United States)

    Zhan, Yihong; Wang, Jun; Bao, Ning; Lu, Chang

    2009-03-01

    Droplet-based microfluidics has raised a lot of interest recently due to its wide applications to screening biological/chemical assays with high throughput. Despite the advances on droplet-based assays involving cells, gene delivery methods that are compatible with the droplet platform have been lacking. In this report, we demonstrate a simple microfluidic device that encapsulates cells into aqueous droplets and then electroporates the encapsulated cells. The electroporation occurs when the cell-containing droplets (in oil) flow through a pair of microelectrodes with a constant voltage established in between. We investigate the parameters and characteristics of the electroporation. We demonstrate delivering enhanced green fluorescent protein (EGFP) plasmid into Chinese hamster ovary (CHO) cells. We envision the application of this technique to high-throughput functional genomics studies based on droplet microfluidics.

  12. Processing silk hydrogel and its applications in biomedical materials.

    Science.gov (United States)

    Wang, Hai-Yan; Zhang, Yu-Qing

    2015-01-01

    This review mainly introduces the types of silk hydrogels, their processing methods, and applications. There are various methods for hydrogel preparation, and many new processes are being developed for various applications. Silk hydrogels can be used in cartilage tissue engineering, drug release materials, 3D scaffolds for cells, and artificial skin, among other applications because of their porous structure and high porosity and the large surface area for growth, migration, adhesion and proliferation of cells that the hydrogels provide. All of these advantages have made silk hydrogels increasingly attractive. In addition, silk hydrogels have wide prospects for application in the field of biomedical materials.

  13. Self-propelled chemotactic ionic liquid droplets

    OpenAIRE

    Francis, Wayne; Fay, Cormac; Florea, Larisa; Diamond, Dermot

    2015-01-01

    Herein we report the chemotactic behaviour of self-propelled droplets composed solely of the ionic liquid trihexyl(tetradecyl)phosphonium chloride ([P6,6,6,14][Cl]). These droplets spontaneously move along an aqueous-air boundary in the direction of chloride gradients to specific destinations due to asymmetric release of [P6,6,6,14]+ cationic surfactant from the droplet into the aqueous phase.

  14. Thermophoresis of water droplets inside carbon nanotubes

    DEFF Research Database (Denmark)

    Zambrano, Harvey; Walther, Jens Honore; Oyarzua, Elton

    2016-01-01

    Carbon Nanotubes(CNTs) offer unique possibilities as fluid conduits with applications ranging from lab on a chip devices to encapsulation media for drug delivery. CNTs feature high mechanical strength, chemical and thermalstability and biocompatibility therefore they are promising candidates...... for nanodevice fabrication. Thermal gradients have been proposed as mechanism to drive particles, fullerenes and droplets inside CNTs. Here, by conducting Molecular Dynamics (MD) simulations, we study thermophoresis of water droplets inside CNTs. We systematically change the size of the droplets, the axial...

  15. Droplets as reaction compartments for protein nanotechnology.

    Science.gov (United States)

    Devenish, Sean R A; Kaltenbach, Miriam; Fischlechner, Martin; Hollfelder, Florian

    2013-01-01

    Extreme miniaturization of biological and chemical reactions in pico- to nanoliter microdroplets is emerging as an experimental paradigm that enables more experiments to be carried out with much lower sample consumption, paving the way for high-throughput experiments. This review provides the protein scientist with an experimental framework for (a) formation of polydisperse droplets by emulsification or, alternatively, of monodisperse droplets using microfluidic devices; (b) construction of experimental rigs and microfluidic chips for this purpose; and (c) handling and analysis of droplets.

  16. Temperature responsive hydrogel nanofibers and nanoparticles

    Science.gov (United States)

    Ruokolainen, Janne

    2011-03-01

    Poly(N-isopropylacrylamide) (PNIPAM) is one of the most extensively investigated synthetic temperature-responsive polymers. In this work temperature-responsive PNIPAM based triblock copolymer hydrogels, their self-assembly and phase behavior in bulk, are described. Additionally, recent results from responsive hydrogel nanofibers and hydrogel nanoparticles are shown. It is known that block copolymers form well-organized nano structures in bulk or thin films when annealed thermally or in solvent vapours. However, in the case of nanofibers or nanoparticles, the annealing leads in most cases to aggregation and particle sintering. This work utilizes aerosol-based gas phase method where the preparation and annealing of hydrogel nanoparticles with well-organized, hierarchical inner structures are performed without any particle coagulation or sintering. In the method, the block copolymers assemble within aerosol nanoparticles to form, for instance, lamellar onion-like or gyroid inner structures.

  17. Responsive polyelectrolyte hydrogels and soft matter micromanipulation

    NARCIS (Netherlands)

    Glazer, P.J.

    2013-01-01

    This dissertation describes experimental studies on the mechanisms underlying the dynamic response of polyelectrolyte hydrogels when submitted to an external electric potential. In addition, we explore the possibilities of miniaturization and manipulation of responsive gels and other soft matter sys

  18. Hydrogels made from chitosan and silver nitrate.

    Science.gov (United States)

    Kozicki, Marek; Kołodziejczyk, Marek; Szynkowska, Małgorzata; Pawlaczyk, Aleksandra; Leśniewska, Ewa; Matusiak, Aleksandra; Adamus, Agnieszka; Karolczak, Aleksandra

    2016-04-20

    This work describes a gelation of chitosan solution with silver nitrate. Above the critical concentration of chitosan (c*), continuous hydrogels of chitosan-silver can be formed. At lower concentrations, the formation of nano- and micro-hydrogels is discussed. The sol-gel analysis was performed to characterise the hydrogels' swelling properties. Moreover, the following were employed: (i) mechanical testing of hydrogels, (ii) inductively coupled plasma-optical emission spectroscopy (ICP-OES) for the measurement of silver concentration, (iii) scanning electron microscopy (SEM) to examine the morphology of products obtained, and (iv) dynamic light scattering (DLS) and UV-vis spectrophotometry to examine products formed at low concentration of chitosan (chydrogels were used for modification of cotton fabric in order to give it antimicrobial properties. The products obtained acted against Escherichia coli and Bacillus subtilis apart from the chitosan used that showed no such activity.

  19. Liquid Droplets on a Highly Deformable Membrane

    Science.gov (United States)

    Schulman, Rafael; Dalnoki-Veress, Kari

    2015-11-01

    We present measurements of the deformation produced by micro-droplets atop thin elastomeric and glassy free-standing films. Due to the Laplace pressure, the droplets deform the elastic membrane thereby forming a bulge. Thus, there are two angles that define the droplet/membrane geometry: the angle the liquid surface makes with the film and the angle the deformed bulge makes with the film. The contact line geometry is well captured by a Neumann construction which includes contributions from interfacial and mechanical tensions. Finally, we show that a droplet atop a film with biaxial tension assumes an equilibrium shape which is elongated along the axis of high tension.

  20. Droplet evaporation with complexity of evaporation modes

    Science.gov (United States)

    Hwang, In Gyu; Kim, Jin Young; Weon, Byung Mook

    2017-01-01

    Evaporation of a sessile droplet often exhibits a mixed evaporation mode, where the contact radius and the contact angle simultaneously vary with time. For sessile water droplets containing polymers with different initial polymer concentrations, we experimentally study their evaporation dynamics by measuring mass and volume changes. We show how diffusion-limited evaporation governs droplet evaporation, regardless of the complexity of evaporation behavior, and how the evaporation rate depends on the polymer concentration. Finally, we suggest a unified expression for a diffusion-limited evaporation rate for a sessile droplet with complexity in evaporation dynamics.

  1. Compound droplet manipulations on fiber arrays

    CERN Document Server

    Weyer, Floriane; Dreesen, Laurent; Vandewalle, Nicolas

    2015-01-01

    Recent works demonstrated that fiber arrays may constitue the basis of an open digital microfluidics. Various processes, such as droplet motion, fragmentation, trapping, release, mixing and encapsulation, may be achieved on fiber arrays. However, handling a large number of tiny droplets resulting from the mixing of several liquid components is still a challenge for developing microreactors, smart sensors or microemulsifying drugs. Here, we show that the manipulation of tiny droplets onto fiber networks allows for creating compound droplets with a high complexity level. Moreover, this cost-effective and flexible method may also be implemented with optical fibers in order to develop fluorescence-based biosensor.

  2. Dissonant Black Droplets and Black Funnels

    CERN Document Server

    Fischetti, Sebastian; Way, Benson

    2016-01-01

    A holographic field theory on a fixed black hole background has a gravitational dual represented by a black funnel or a black droplet. These states are "detuned" when the temperature of the field theory near the horizon does not match the temperature of the background black hole. In particular, the gravitational dual to the Boulware state must be a detuned solution. We construct detuned droplets and funnels dual to a Schwarzschild background and show that the Boulware phase is represented by a droplet. We also construct hairy black droplets associated to a low-temperature scalar condensation instability and show that they are thermodynamically preferred to their hairless counterparts.

  3. Evaporation of nanofluid droplet on heated surface

    Directory of Open Access Journals (Sweden)

    Yeung Chan Kim

    2015-04-01

    Full Text Available In this study, an experiment on the evaporation of nanofluid sessile droplet on a heated surface was conducted. A nanofluid of 0.5% volumetric concentration mixed with 80-nm-sized CuO powder and pure water were used for experiment. Droplet was applied to the heated surface, and images of the evaporation process were obtained. The recorded images were analyzed to find the volume, diameter, and contact angle of the droplet. In addition, the evaporative heat transfer coefficient was calculated from experimental result. The results of this study are summarized as follows: the base diameter of the droplet was maintained stably during the evaporation. The measured temperature of the droplet was increased rapidly for a very short time, then maintained constantly. The nanofluid droplet was evaporated faster than the pure water droplet under the experimental conditions of the same initial volume and temperature, and the average evaporative heat transfer coefficient of the nanofluid droplet was higher than that of pure water. We can consider the effects of the initial contact angle and thermal conductivity of nanofluid as the reason for this experimental result. However, the effect of surface roughness on the evaporative heat transfer of nanofluid droplet appeared unclear.

  4. Quantitative DNA Analysis Using Droplet Digital PCR.

    Science.gov (United States)

    Vossen, Rolf H A M; White, Stefan J

    2017-01-01

    Droplet digital PCR (ddPCR) is based on the isolated amplification of thousands of individual DNA molecules simultaneously, with each molecule compartmentalized in a droplet. The presence of amplified product in each droplet is indicated by a fluorescent signal, and the proportion of positive droplets allows the precise quantification of a given sequence. In this chapter we briefly outline the basis of ddPCR, and describe two different applications using the Bio-Rad QX200 system: genotyping copy number variation and quantification of Illumina sequencing libraries.

  5. A Theory of Shape-Shifting Droplets

    Science.gov (United States)

    Haas, Pierre; Goldstein, Raymond; Smoukov, Stoyan; Denkov, Nikolai

    2016-11-01

    Recent observations of cooled oil emulsion droplets uncovered a remarkable array of shape transformations: the initially spherical droplets flatten into polygonal shapes, first hexagons, then triangles or quadrilaterals that ultimately grow thin protrusions from their corners. These transformations are driven by a partial phase transition of the bulk liquid phase. In this talk, we explore theoretically the simplest geometric competition between this phase transition and surface tension in planar polygons. We recover the experimental sequence of shapes and predict shape statistics in qualitative agreement with experiments. Extending the model to capture some of the three-dimensional structure of the droplets, we analyse the topological transition of droplet puncture observed in experiments.

  6. Multitriggered Shape-Memory Acrylamide-DNA Hydrogels.

    Science.gov (United States)

    Lu, Chun-Hua; Guo, Weiwei; Hu, Yuwei; Qi, Xiu-Juan; Willner, Itamar

    2015-12-23

    Acrylamide-acrylamide nucleic acids are cross-linked by two cooperative functional motives to form shaped acrylamide-DNA hydrogels. One of the cross-linking motives responds to an external trigger, leading to the dissociation of one of the stimuli-responsive bridges, and to the transition of the stiff shaped hydrogels into soft shapeless states, where the residual bridging units, due to the chains entanglement, provide an intrinsic memory for the reshaping of the hydrogels. Subjecting the shapeless states to counter stimuli restores the dissociated bridges, and regenerates the original shape of the hydrogels. By the cyclic dissociation and reassembly of the stimuli-responsive bridges, the reversible switchable transitions of the hydrogels between stiff shaped hydrogel structures and soft shapeless states are demonstrated. Shaped hydrogels bridged by K(+)-stabilized G-quadruplexes/duplex units, by i-motif/duplex units, or by two different duplex bridges are described. The cyclic transitions of the hydrogels between shaped and shapeless states are stimulated, in the presence of appropriate triggers and counter triggers (K(+) ion/crown ether; pH = 5.0/8.0; fuel/antifuel strands). The shape-memory hydrogels are integrated into shaped two-hydrogel or three-hydrogel hybrid structures. The cyclic programmed transitions of selective domains of the hybrid structures between shaped hydrogel and shapeless states are demonstrated. The possible applications of the shape-memory hydrogels for sensing, inscription of information, and controlled release of loads are discussed.

  7. Droplet dynamics on patterned substrates

    Indian Academy of Sciences (India)

    A Dupuis; J M Yeomans

    2005-06-01

    We present a lattice Boltzmann algorithm which can be used to explore the spreading of droplets on chemically and topologically patterned substrates. As an example we use the method to show that the final configuration of a drop on a substrate comprising hydrophobic and hydrophilic stripes can depend sensitively on the dynamical pathway by which the state is reached. We also consider a substrate covered with micron-scale posts and investigate how this can lead to superhydrophobic behaviour. Finally we model how a Namibian desert beetle collects water from the wind.

  8. The epididymis, cytoplasmic droplets and male fertility

    Institute of Scientific and Technical Information of China (English)

    Trevor G Cooper

    2011-01-01

    The potential of spermatozoa to become motile during post-testicular maturation,and the relationship between the cytoplasmic droplet and fertilizing capacity are reviewed.Post-testicular maturation of spermatozoa involves the autonomous induction of motility,which can occur in vivo in testes with occluded excurrent ducts and in vitro in testicular explants,and artefactual changes in morphology that appear to occur in the testis in vitro.Both modifications may reflect time-dependent oxidation of disulphide bonds of head and tail proteins.Regulatory volume decrease(RVD),which counters sperm swelling at ejaculation,is discussed in relation to loss of cytoplasmic droplets and consequences for fertility.It is postulated that:(i)fertile males possess spermatozoa with sufficient osmolytes to drive RVD at ejaculation,permitting the droplet to round up and pinch off without membrane rupture; and(ⅱ)infertile males possess spermatozoa with insufficient osmolytes so that RVD is inadequate,the droplet swells and the resulting flagellar angulation prevents droplet loss.Droplet retention at ejaculation is a harbinger of infertility caused by failure of the spermatozoon to negotiate the uterotubal junction or mucous and reach the egg.In this hypothesis,the epididymis regulates fertility indirectly by the extent of osmolyte provision to spermatozoa,which influences RVD and therefore droplet loss.Man is an exception,because ejaculated human spermatozoa retain their droplets.This may reflect their short midpiece,approximating head length,permitting a swollen droplet to extend along the entire midpiece; this not only obviates droplet migration and flagellar angulation but also hampers droplet loss.

  9. Synthesis and characterization of novel carboxymethylcellulose hydrogels and carboxymethylcellulolse-hydrogel-ZnO-nanocomposites.

    Science.gov (United States)

    Hashem, M; Sharaf, S; Abd El-Hady, M M; Hebeish, A

    2013-06-05

    New approach for preparation of CMC hydrogels was undertaken through reacting CMC with either malic, succinic or citric acid. Characteristics of the hydrogels, as monitored by the swelling behavior, FTIR, SEM, EDX, TEM and XRD were dependent on nature and concentration of the polycarboxylic acid, time and temperature of curing. The best practice achieved from these studies was harnessed to synthesize and characterize CMC hydrogel-ZnO-nanocomposites with additional study pertaining to the antibacterial activity of the nanocomposites. CMC hydrogel with excellent swelling behavior could be prepared by adding succinic acid (0.5%) to CMC solution then drying the obtained paste at 80 °C for 5 min followed by curing at 120 °C for 3 min. Similarly, addition of ZnNO3 solution to the CMC paste results in CMC hydrogel-ZnO-nanocomposites having biocidal activity to gram +ve and gram -ve bacteria.

  10. Fabrication of keratin-silica hydrogel for biomedical applications.

    Science.gov (United States)

    Kakkar, Prachi; Madhan, Balaraman

    2016-09-01

    In the recent past, keratin has been fabricated into different forms of biomaterials like scaffold, gel, sponge, film etc. In lieu of the myriad advantages of the hydrogels for biomedical applications, a keratin-silica hydrogel was fabricated using tetraethyl orthosilicate (TEOS). Textural analysis shed light on the physical properties of the fabricated hydrogel, inturn enabling the optimization of the hydrogel. The optimized keratin-silica hydrogel was found to exhibit instant springiness, optimum hardness, with ease of spreadability. Moreover, the hydrogel showed excellent swelling with highly porous microarchitecture. MTT assay and DAPI staining revealed that keratin-silica hydrogel was biocompatible with fibroblast cells. Collectively, these properties make the fabricated keratin-silica hydrogel, a suitable dressing material for biomedical applications.

  11. A pH-sensitive Modified Polyacrylamide Hydrogel

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    A pH-sensitive modified polyacrylamide hydrogel was prepared by two steps and the modified polyacrylamide was characterized by 1HNMR spectrum. The surface morphology and swelling behavior of the hydrogels were investigated.

  12. New in situ crosslinking chemistries for hydrogelation

    Science.gov (United States)

    Roberts, Meredith Colleen

    Over the last half century, hydrogels have found immense value as biomaterials in a vast number of biomedical and pharmaceutical applications. One subset of hydrogels receiving increased attention is in situ forming gels. Gelling by either bioresponsive self-assembly or mixing of binary crosslinking systems, these technologies are useful in minimally invasive applications as well as drug delivery systems in which the sol-to-gel transition aids the formulation's performance. Thus far, the field of in situ crosslinking hydrogels has received limited attention in the development of new crosslinking chemistries. Moreover, not only does the chemical nature of the crosslinking moieties allow these systems to perform in situ, but they contribute dramatically to the mechanical properties of the hydrogel networks. For example, reversible crosslinks with finite lifetimes generate dynamic viscoelastic gels with time-dependent properties, whereas irreversible crosslinks form highly elastic networks. The aim of this dissertation is to explore two new covalent chemistries for their ability to crosslink hydrogels in situ under physiological conditions. First, reversible phenylboronate-salicylhydroxamate crosslinking was implemented in a binary, multivalent polymeric system. These gels formed rapidly and generated hydrogel networks with frequency-dependent dynamic rheological properties. Analysis of the composition-structure-property relationships of these hydrogels---specifically considering the effects of pH, degree of polymer functionality, charge of the polymer backbone and polymer concentration on dynamic theological properties---was performed. These gels demonstrate diverse mechanical properties, due to adjustments in the binding equilibrium of the pH-sensitive crosslinks, and thus have the potential to perform in a range of dynamic or bioresponsive applications. Second, irreversible catalyst-free "click" chemistry was employed in the hydrogelation of multivalent azide

  13. Vortices catapult droplets in atomization

    CERN Document Server

    Jerome, J John Soundar; Matas, Jean-Philippe; Zaleski, Stéphane; Hoepffner, Jérôme

    2016-01-01

    A droplet ejection mechanism in planar two-phase mixing layers is examined. Any disturbance on the gas-liquid interface grows into a Kelvin-Helmholtz wave, and the wave crest forms a thin liquid film that flaps as the wave grows downstream. Increasing the gas speed, it is observed that the film breaks up into droplets which are eventually thrown into the gas stream at large angles. In a flow where most of the momentum is in the horizontal direction, it is surprising to observe these large ejection angles. Our experiments and simulations show that a recirculation region grows downstream of the wave and leads to vortex shedding similar to the wake of a backward-facing step. The ejection mechanism results from the interaction between the liquid film and the vortex shedding sequence: a recirculation zone appears in the wake of the wave and a liquid film emerges from the wave crest; the recirculation region detaches into a vortex and the gas flow over the wave momentarily reattaches due to the departure of the vor...

  14. Droplet turbulence interactions under subcritical and supercritical conditions

    Science.gov (United States)

    Coy, E. B.; Greenfield, S. C.; Ondas, M. S.; Song, Y.-H.; Spegar, T. D.; Santavicca, D. A.

    1993-01-01

    The goal of this research is to experimentally characterize the behavior of droplets in vaporizing liquid sprays under conditions typical of those encountered in high pressure combustion systems such as liquid fueled rocket engines. Of particular interest are measurements of droplet drag, droplet heating, droplet vaporization, droplet distortion, and secondary droplet breakup, under both subcritical and supercritical conditions. The paper presents a brief description of the specific accomplishments which have been made over the past year.

  15. Forces Acting on Sessile Droplet on Inclined Surfaces

    OpenAIRE

    Annapragada, S. Ravi; Murthy, Jayathi Y.; Garimella, Suresh V.

    2009-01-01

    Although many analytical, experimental and numerical studies have focused on droplet motion, the mechanics of the droplet while still in its static state, and just before motion starts, are not well understood. A study of static droplets would shed light on the threshold voltage (or critical inclination) for initiating electrically (or gravitationally) induced droplet motion. Before the droplet starts to move, the droplet shape changes such that the forces acting at the triple contact line ba...

  16. Preparation of bacterial cellulose based hydrogels and their viscoelastic behavior

    OpenAIRE

    2015-01-01

    Bacterial cellulose (BC) based hydrogels have been prepared in blended with carboxymethylcellulose and polyvinyl pyrrolidone by using heat treatment. The properties of BC-CMC and BC-PVP hydrogels were compared with pure BC, CMC and PVP hydrogels. These hydrogels were investigated by measuring their structural, morphological and viscoelastic properties. Through the morphological images, alignment of the porous flake like structures could be seen clearly within the inter-polymeric network of th...

  17. Research on the printability of hydrogels in 3D bioprinting

    OpenAIRE

    Yong He; FeiFei Yang; HaiMing Zhao; Qing Gao; Bing Xia; JianZhong Fu

    2016-01-01

    As the biocompatible materials, hydrogels have been widely used in three- dimensional (3D) bioprinting/organ printing to load cell for tissue engineering. It is important to precisely control hydrogels deposition during printing the mimic organ structures. However, the printability of hydrogels about printing parameters is seldom addressed. In this paper, we systemically investigated the printability of hydrogels from printing lines (one dimensional, 1D structures) to printing lattices/films ...

  18. Exotic states of bouncing and walking droplets

    DEFF Research Database (Denmark)

    Wind-Willassen, Øistein; Moláček, Jan; Harris, Daniel M.;

    2013-01-01

    We present the results of an integrated experimental and theoretical investigation of droplets bouncing on a vibrating fluid bath. A comprehensive series of experiments provides the most detailed characterisation to date of the system's dependence on fluid properties, droplet size, and vibrationa...

  19. Droplets bouncing over a vibrating fluid layer

    CERN Document Server

    Cabrera-Garcia, Pablo

    2012-01-01

    This is an entry for the Gallery of Fluid Motion of the 65st Annual Meeting of the APS-DFD (fluid dynamics video). This video shows the motion of levitated liquid droplets. The levitation is produced by the vertical vibration of a liquid container. We made visualizations of the motion of many droplets to study the formation of clusters and their stability.

  20. Analysis of coalescence behavior for compressed droplets

    Science.gov (United States)

    Choi, Sung Woong; Lee, Dong Eon; Lee, Woo Il; Kim, Han Sang

    2017-03-01

    Coalescence of droplets is a significant phenomenon, and it has been adapted to many applications such as raindrop formation, emulsion polymerization, ink-jet printing, coating, and multiphase flows. In this study, the morphological characteristics of two compressed adjacent droplets between two parallel plates were investigated to study the phenomenon of coalescence of droplets. By controlling the distance of the dispensed droplets, various results for coalescence of droplets were evaluated, especially, from the view of the minor axis, major axis, and meniscus liquid bridge of the coalesced droplet. Experimental results show that the length of the meniscus liquid bridge rapidly increases and then the rate of increase slows with time. The increase rate of the major and minor axes is largely influenced by the meniscus liquid bridge, which is mainly due to the curvature between the droplets. The numerical modeling of the coalescence of the two compressed droplets between two parallel plates was presented and simulation was conducted to realize the coalescence behavior. Comparison with numerical simulation showed that there was a good agreement with the experimental results.

  1. Driving Droplets by Curvi-Propulsion

    CERN Document Server

    Lv, Cunjing; Chuang, Yin-Chuan; Tseng, Fan-Gang; Yin, Yajun; Grey, Francois; Zheng, Quanshui

    2012-01-01

    How to make small liquid droplets move spontaneously and directionally on solid surfaces is a challenge in lab-on-chip technologies, DNA analysis, and heat exchangers. The best-known mechanism, a wettability gradient, does not move droplets rapidly enough for most purposes and cannot move droplets smaller than a critical size defined by the contact angle hysteresis. Here we report on a mechanism using curvature gradients, which we show is particularly effective at accelerating small droplets, and works for both hydrophilic and hydrophobic surfaces. Experiments for water droplets on glass cones in the sub-millimeter range show a maximum speed of 0.28 m/s, two orders of magnitude higher than obtained by wettability gradient. From simple considerations of droplet surface area change, we show that the force exerted on a droplet on a conical surface scales as the curvature gradient. This force therefore diverges for small droplets near the tip of a cone. We illustrate this using molecular dynamics simulations, and...

  2. Dynamic Morphologies of Microscale Droplet Interface Bilayers

    Energy Technology Data Exchange (ETDEWEB)

    Mruetusatorn, Prachya [ORNL; Boreyko, Jonathan B [ORNL; Sarles, Stephen A [ORNL; Venkatesan, Guru [The University of Tennessee; Hayes, Douglas G [ORNL; Collier, Pat [ORNL

    2014-01-01

    Droplet interface bilayers (DIBs) are a powerful platform for studying the dynamics of synthetic cellular membranes; however, very little has been done to exploit the unique dynamical features of DIBs. Here, we generate microscale droplet interface bilayers ( DIBs) by bringing together femtoliter-volume water droplets in a microfluidic oil channel, and characterize morphological changes of the DIBs as the droplets shrink due to evaporation. By varying the initial conditions of the system, we identify three distinct classes of dynamic morphology. (1) Buckling and Fission: When forming DIBs using the lipid-out method (lipids in oil phase), lipids in the shrinking monolayers continually pair together and slide into the bilayer to conserve their mass. As the bilayer continues to grow, it becomes confined, buckles, and eventually fissions one or more vesicles. (2) Uniform Shrinking: When using the lipid-in method (lipids in water phase) to form DIBs, lipids uniformly transfer from the monolayers and bilayer into vesicles contained inside the water droplets. (3) Stretching and Unzipping: Finally, when the droplets are pinned to the wall(s) of the microfluidic channel, the droplets become stretched during evaporation, culminating in the unzipping of the bilayer and droplet separation. These findings offer a better understanding of the dynamics of coupled lipid interfaces.

  3. Experimental Study on Self-assembly of KLD-12 Peptide Hydrogel and 3-D Culture of MSC Encapsulated within Hydrogel In Vitro

    Institute of Scientific and Technical Information of China (English)

    Jianhua SUN; Qixin ZHENG

    2009-01-01

    o-fiber hydrogel in vitro. MSCs in KLD-12 peptide hydrogel grew well and proliferated with the culture time. KLD-12 peptide hydrogel can serve as an excellent injectable material of biological scaffolds in tissue engineering of IVD.

  4. A novel cellulose hydrogel prepared from its ionic liquid solution

    Institute of Scientific and Technical Information of China (English)

    LI Lu; LIN ZhangBi; YANG Xiao; WAN ZhenZhen; CUI ShuXun

    2009-01-01

    A novel cellulose hydrogel is prepared by regenerating cellulose from its ionic liquid solution. The transparency cellulose hydrogel presents a good chemical stability and an acceptable mechanical property. This non-toxic cellulose hydrogel should be biocompatibie and may be useful in the future as a biomaterial.

  5. Co-assembly of chitosan and phospholipids into hybrid hydrogels

    DEFF Research Database (Denmark)

    Mendes, Ana Carina Loureiro; Shekarforoush, Elhamalsadat; Engwer, Christoph

    2016-01-01

    Novel hybrid hydrogels were formed by adding chitosan (Ch) to phospholipids (P) self-assembled particles in lactic acid. The effect of the phospholipid concentration on the hydrogel properties was investigated and was observed to affect the rate of hydrogel formation and viscoelastic properties...

  6. 4D Printing with Mechanically Robust, Thermally Actuating Hydrogels.

    Science.gov (United States)

    Bakarich, Shannon E; Gorkin, Robert; in het Panhuis, Marc; Spinks, Geoffrey M

    2015-06-01

    A smart valve is created by 4D printing of hydrogels that are both mechanically robust and thermally actuating. The printed hydrogels are made up of an interpenetrating network of alginate and poly(N-isopropylacrylamide). 4D structures are created by printing the "dynamic" hydrogel ink alongside other static materials.

  7. A hydrogel-based enzyme-loaded polymersome reactor

    NARCIS (Netherlands)

    Hoog, de Hans-Peter; Arends, Isabel W.C.E.; Rowan, Alan E.; Cornelissen, Jeroen J.L.M.; Nolte, Roeland J.M.

    2010-01-01

    In this study we report the immobilization of enzyme-containing polymersomes into a macromolecular hydrogel. Whereas free enzyme shows progressive leakage from the hydrogel in a period of days, leakage of the polymersome-protected enzyme is virtually absent. The preparation of the hydrogel occurs un

  8. Hydrogels for an accommodating intraocular lens. An explorative study

    NARCIS (Netherlands)

    de Groot, JH; Spaans, CJ; van Calck, RV; van Beijma, FJ; Norrby, S; Pennings, AJ

    2003-01-01

    In this study it was investigated whether hydrogels could be used for an accommodating lens. The requirements of such a hydrogels are a low modulus, high refractive index, transparency, and strength. Since conventional hydrogels do not possess this combination of properties, a novel preparation meth

  9. Acoustophoresis in Variously Shaped Liquid Droplets

    CERN Document Server

    Yu, Gan; Xu, Jie; 10.1039/c1sm05871a

    2012-01-01

    The ability to precisely trap, transport and manipulate micrometer-sized objects, including biological cells, DNA-coated microspheres and microorganisms, is very important in life science studies and biomedical applications. In this study, acoustic radiation force in an ultrasonic standing wave field is used for micro-objects manipulation, a technique termed as acoustophoresis. Free surfaces of liquid droplets are used as sound reflectors to confine sound waves inside the droplets. Two techniques were developed for precise control of droplet shapes: edge pinning and hydrophilic/hydrophobic interface pinning. For all tested droplet shapes, including circular, annular and rectangular, our experiments show that polymer micro particles can be manipulated by ultrasound and form into a variety of patterns, for example, concentric rings and radial lines in an annular droplet. The complexity of the pattern increases with increasing frequency, and the observations are in line with simulation results. The acoustic mani...

  10. New models for droplet heating and evaporation

    KAUST Repository

    Sazhin, Sergei S.

    2013-02-01

    A brief summary of new models for droplet heating and evaporation, developed mainly at the Sir Harry Ricardo Laboratory of the University of Brighton during 2011-2012, is presented. These are hydrodynamic models for mono-component droplet heating and evaporation, taking into account the effects of the moving boundary due to evaporation, hydrodynamic models of multi-component droplet heating and evaporation, taking and not taking into account the effects of the moving boundary, new kinetic models of mono-component droplet heating and evaporation, and a model for mono-component droplet evaporation, based on molecular dynamics simulation. The results, predicted by the new models are compared with experimental data and the prehctions of the previously developed models where possible. © 2013 Asian Network for Scientific Information.

  11. Preparation and nucleation of spherical metallic droplet

    Directory of Open Access Journals (Sweden)

    Bing-ge Zhao

    2015-03-01

    Full Text Available The preparation and solidification of metallic droplets attract more and more attention for their significance in both engineering and scientific fields. In this paper, the preparation and characterization of Sn-based alloy droplets using different methods such as atomization and consumable electrode direct current arc (CDCA technique are reviewed. The morphology and structure of these droplets were determined by optical microscopy, X-ray diffraction (XRD and scanning electron microscopy (SEM. The solidification behavior of single droplet was systematically studied by means of scanning calorimetry (DSC, and the nucleation kinetics was also calculated. In particular, the development of fast scanning calorimetry (FSC made it possible to investigate the evolution of undercooling under ultrafast but controllable heating and cooling conditions. The combination of CDCA technique and FSC measurements opens up a new door for quantitative studies on droplet solidification, which is accessible to demonstrate some theories by experiments.

  12. Statistical steady state in turbulent droplet condensation

    CERN Document Server

    Siewert, Christoph; Krstulovic, Giorgio

    2016-01-01

    Motivated by the early stages of clouds and other systems in which droplets grow and shrink in a turbulence-driven supersaturation field, we investigate the problem of turbulent condensation using direct numerical simulations. The turbulent fluctuations of the supersaturation field offer different conditions for the growth of droplets which evolve in time due to turbulent transport and mixing. Based on that, we propose a Lagrangian stochastic model for condensation and evaporation of small droplets in turbulent flows. It consists of a set of stochastic integro-differential equations for the joint evolution of the squared radius and the supersaturation along the droplet trajectories. The model has two parameters fixed by the total amount of water and the thermodynamic properties, as well as the Lagrangian integral timescale of the turbulent supersaturation. The model reproduces very well the droplet size distributions obtained from direct numerical simulations and their time evolution. A noticeable result is t...

  13. Generation of droplets to serpentine threads on a rotating compact-disk platform

    Science.gov (United States)

    Kar, Shantimoy; Joshi, Sumit; Chaudhary, Kaustav; Maiti, Tapas Kumar; Chakraborty, Suman

    2015-12-01

    We generate stable monodisperse droplets of nano-liter volumes and long serpentine liquid threads in a single, simple "Y"-shaped microchannel mounted on a rotationally actuated lab-on-a-compact-disk platform. Exploitation of Coriolis force offers versatile modus operandi of the present setup, without involving any design complications. Based on the fundamental understanding and subsequent analysis, we present scaling theories consistent with the experimental observations. We also outline specific applications of this technique, in the biological as well as in the physical domain, including digital polymerase chain reaction (PCR), controlled release of medical components, digital counting of colony forming units, hydrogel engineering, optical sensors and scaffolds for living tissues, to name a few.

  14. Fluoropolymer surface coatings to control droplets in microfluidic devices.

    Science.gov (United States)

    Riche, Carson T; Zhang, Chuchu; Gupta, Malancha; Malmstadt, Noah

    2014-06-07

    We have demonstrated the application of low surface energy fluoropolymer coatings onto poly(dimethylsiloxane) (PDMS) microfluidic devices for droplet formation and extraction-induced merger of droplets. Initiated chemical vapor deposition (iCVD) was used to pattern fluoropolymer coatings within microchannels based on geometrical constraints. In a two-phase flow system, the range of accessible flow rates for droplet formation was greatly enhanced in the coated devices. The ability to controllably apply the coating only at the inlet facilitated a method for merging droplets. An organic spacer droplet was extracted from between a pair of aqueous droplets. The size of the organic droplet and the flow rate controlled the time to merge the aqueous droplets; the process of merging was independent of the droplet sizes. Extraction-induced droplet merging is a robust method for manipulating droplets that could be applied in translating multi-step reactions to microfluidic platforms.

  15. Growth and Division of Active Droplets: A Model for Protocells

    CERN Document Server

    Zwicker, David; Weber, Christoph A; Hyman, Anthony A; Jülicher, Frank

    2016-01-01

    It has been proposed that during the early steps in the origin of life, small droplets could have formed via the segregation of molecules from complex mixtures by phase separation. These droplets could have provided chemical reaction centers. However, whether these droplets could divide and propagate is unclear. Here we examine the behavior of droplets in systems that are maintained away from thermodynamic equilibrium by an external supply of energy. In these systems, droplets grow by the addition of droplet material generated by chemical reactions. Surprisingly, we find that chemically driven droplet growth can lead to shape instabilities that trigger the division of droplets into two smaller daughters. Therefore, chemically active droplets can exhibit cycles of growth and division that resemble the proliferation of living cells. Dividing active droplets could serve as a model for prebiotic protocells, where chemical reactions in the droplet play the role of a prebiotic metabolism.

  16. Hydrogel Actuation by Electric Field Driven Effects

    Science.gov (United States)

    Morales, Daniel Humphrey

    Hydrogels are networks of crosslinked, hydrophilic polymers capable of absorbing and releasing large amounts of water while maintaining their structural integrity. Polyelectrolyte hydrogels are a subset of hydrogels that contain ionizable moieties, which render the network sensitive to the pH and the ionic strength of the media and provide mobile counterions, which impart conductivity. These networks are part of a class of "smart" material systems that can sense and adjust their shape in response to the external environment. Hence, the ability to program and modulate hydrogel shape change has great potential for novel biomaterial and soft robotics applications. We utilized electric field driven effects to manipulate the interaction of ions within polyelectrolyte hydrogels in order to induce controlled deformation and patterning. Additionally, electric fields can be used to promote the interactions of separate gel networks, as modular components, and particle assemblies within gel networks to develop new types of soft composite systems. First, we present and analyze a walking gel actuator comprised of cationic and anionic gel legs attached by electric field-promoted polyion complexation. We characterize the electro-osmotic response of the hydrogels as a function of charge density and external salt concentration. The gel walkers achieve unidirectional motion on flat elastomer substrates and exemplify a simple way to move and manipulate soft matter devices in aqueous solutions. An 'ionoprinting' technique is presented with the capability to topographically structure and actuate hydrated gels in two and three dimensions by locally patterning ions induced by electric fields. The bound charges change the local mechanical properties of the gel to induce relief patterns and evoke localized stress, causing rapid folding in air. The ionically patterned hydrogels exhibit programmable temporal and spatial shape transitions which can be tuned by the duration and/or strength of

  17. Microfluidics-assisted diffusion self-assembly: toward the control of the shape and size of pectin hydrogel microparticles.

    Science.gov (United States)

    Marquis, Mélanie; Davy, Joelle; Fang, Aiping; Renard, Denis

    2014-05-12

    We demonstrated the generation of pectin hydrogel microparticles having complex shapes either by combining the phenomenon of gelation and water diffusion-induced self-assembly in microfluidic channels (on-chip) or by the deformation of the pregelled droplets outside the channels (off-chip) at a fluid-fluid interface. We proved that by tuning the mode of pectin cross-linking (CaCl2 vs CaCO3) and the degree of shrinking (water content in the dimethyl carbonate (DMC) organic continuous phase) we can control the shape of the final particle. Sphere, doughnut, oblate ellipsoid, or mushroom-type morphologies were thus produced, demonstrating the ability to control the formation of anisotropic biopolymer-based hydrogel microparticles using microfluidics. Shape changes were explained by the redistribution of calcium ions in combination with the local Peclet number experienced by the microdroplets during the on-chip process. Moreover, during the off-chip process, the interplay between elastic and viscous forces for microdroplets entering the CaCl2-DMC interface caused deformation of the pregelled droplets to occur and therefore resulted in the formation of microparticles with a mushroom-like morphology.

  18. Numerical simulations of pendant droplets

    Science.gov (United States)

    Pena, Carlos; Kahouadji, Lyes; Matar, Omar; Chergui, Jalel; Juric, Damir; Shin, Seungwon

    2015-11-01

    We simulate the evolution of a three-dimensional pendant droplet through pinch-off using a new parallel two-phase flow solver called BLUE. The parallelization of the code is based on the technique of algebraic domain decomposition where the velocity field is solved by a parallel GMRes method for the viscous terms and the pressure by a parallel multigrid/GMRes method. Communication is handled by MPI message passing procedures. The method for the treatment of the fluid interfaces uses a hybrid Front Tracking/Level Set technique which defines the interface both by a discontinuous density field as well as by a local triangular Lagrangian mesh. This structure allows the interface to undergo large deformations including the rupture and coalescence of fluid interfaces. EPSRC Programme Grant, MEMPHIS, EP/K0039761/1.

  19. Magnetic hyaluronate hydrogels: preparation and characterization

    Energy Technology Data Exchange (ETDEWEB)

    Tóth, Ildikó Y., E-mail: Ildiko.Toth@chem.u-szeged.hu; Veress, Gábor; Szekeres, Márta; Illés, Erzsébet; Tombácz, Etelka, E-mail: tombacz@chem.u-szeged.hu

    2015-04-15

    A novel soft way of hyaluronate (HyA) based magnetic hydrogel preparation was revealed. Magnetite nanoparticles (MNPs) were prepared by co-precipitation. Since the naked MNPs cannot be dispersed homogenously in HyA-gel, their surface was modified with natural and biocompatible chondroitin-sulfate-A (CSA) to obtain CSA-coated MNPs (CSA@MNPs). The aggregation state of MNPs and that loaded with increasing amount of CSA up to 1 mmol/g was measured by dynamic light scattering at pH~6. Only CSA@MNP with ≥0.2 mmol/g CSA content was suitable for magnetic HyA-gel preparation. Rheological studies showed that the presence of CSA@MNP with up to 2 g/L did not affect the hydrogel's rheological behavior significantly. The results suggest that the HyA-based magnetic hydrogels may be promising formulations for future biomedical applications, e.g. as intra-articular injections in the treatment of osteoarthritis. - Highlights: • Novel hyaluronate(HyA)-based biocompatible magnetic hydrogels were prepared. • Chondroitin-sulfate-A coating is needed to disperse magnetite particles in HyA-gel. • Rheological behavior of hydrogels was independent of the magnetite content (<2 g/L). • Gels remained in stable and homogeneously dispersed state even after 90 days storage. • Magnetic HyA-gels are promising candidates for use as intra-articular injection.

  20. Self-propelled droplet behavior during condensation on superhydrophobic surfaces

    Science.gov (United States)

    Chu, Fuqiang; Wu, Xiaomin; Zhu, Bei; Zhang, Xuan

    2016-05-01

    Self-propelled droplet motion has applications in various engineering fields such as self-cleaning surfaces, heat transfer enhancement, and anti-icing methods. A superhydrophobic surface was fabricated using two simultaneous chemical reactions with droplet condensation experiments performed on the horizontal superhydrophobic surface to characterize the droplet behavior. The droplet behavior is classified into three types based on their motion features and leftover marks as immobile droplet coalescence, self-propelled droplet jumping, and self-propelled droplet sweeping. This study focuses on the droplet sweeping that occurs due to the ultra-small rolling angle of the superhydrophobic surface, where the resulting droplet sweeps along the surface, merging with all the droplets it meets and leaving a long, narrow, clear track with a large droplet at the end of the track. An easy method is developed to predict the droplet sweeping direction based on the relative positions of the droplets just before coalescence. The droplet sweeping always absorbs dozens of droplets and is not limited by the surface structures; thus, this sweeping has many useful applications. In addition, the relationships between the droplet behavior and the number of participating droplets are also analyzed statistically.

  1. NIR and MR imaging supported hydrogel based delivery system for anti-TNF alpha probiotic therapy of IBD

    Science.gov (United States)

    Janjic, Jelena M.; Berlec, Ales; Bagia, Christina; Liu, Lu S.; Jeric, Irenej; Gach, Michael; Janjic, Bratislav M.; Strukelj, Borut

    2016-03-01

    Current treatment of inflammatory bowel disease (IBD) is largely symptomatic and consists of anti-inflammatory agents, immune-suppressives or antibiotics, whereby local luminal action is preferred to minimize systemic side-effects. Recently, anti-TNFα therapy has shown considerable success and is now being routinely used. Here we present a novel approach of using perfluorocarbon (PFC) nanoemulsion containing hydrogels (nanoemulgels) as imaging supported delivery systems for anti-TNF alpha probiotic delivery in IBD. To further facilitate image-guided therapy a food-grade lactic acid bacterium Lactococcus lactis capable of TNFα-binding was engineered to incorporate infrared fluorescent protein (IRFP). This modified bacteria was then incorporated into novel PFC nanoemulgels. The nanoemulgels presented here are designed to deliver locally anti-TNFα probiotic in the lower colon and rectum and provide dual imaging signature of gel delivery (MRI) across the rectum and lower colon and bacteria release (NIR). NIR imaging data in vitro demonstrates high IRFP expressing and TNFα-binding bacteria loading in the hydrogel and complete release in 3 hours. Stability tests indicate that gels remain stable for at least 14 days showing no significant change in droplet size, zeta potential and pH. Flow cytometry analyses demonstrate the NIRF expressing bacteria L. lactis binds TNFα in vitro upon release from the gels. Magnetic resonance and near-infrared imaging in vitro demonstrates homogeneity of hydrogels and the imaging capacity of the overall formulation.

  2. Thermo-mechanical behavior of graphene oxide hydrogel

    Science.gov (United States)

    Ghosh, Rituparna; Deka Boruah, Buddha; Misra, Abha

    2017-02-01

    Graphene oxide hydrogel with encapsulated water presents a unique structural characteristic similar to open cell foam. It is demonstrated that the encapsulated water plays a vital role in tailoring compressive behavior of graphene oxide hydrogel under varying thermal conditions. The present study is focused on systematically evaluating both the temperature and frequency dependence on compressive behavior of hydrogel to elucidate the evolution of stiffness in a wider temperature range. The stiffness of the hydrogel is further tailored through encapsulation of nanoparticles to achieve an extraordinary enhancement in storage modulus. It is concluded that the change in phase of water provides a large gradient in the stiffness of the hydrogel.

  3. Radiation synthesis and characterization of polyacrylic acid hydrogels

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The pH-sensitive polyacrylic acid (PAA) hydrogels were synthesized by gamma-ray irradiation at an ambient temperature. The influences of dose, monomer concentration, cross-linking agent content, pH, and ionic strength on the swelling ratio (SR) of the PAA hydrogels were investigated in detail. The results show that the SR of the hydrogel decreases with an increase in the dose, monomer concentration, and cross-linking agent content. In alkaline solution, the SR of the hydrogels is much higher than that in acid solution. Also, the ionic strength can influence the SR of the hydrogels. The more the concentration, the lower the SR.

  4. Self-arraying of charged levitating droplets.

    Science.gov (United States)

    Kauffmann, Paul; Nussbaumer, Jérémie; Masse, Alain; Jeandey, Christian; Grateau, Henri; Pham, Pascale; Reyne, Gilbert; Haguet, Vincent

    2011-06-01

    Diamagnetic levitation of water droplets in air is a promising phenomenon to achieve contactless manipulation of chemical or biochemical samples. This noncontact handling technique prevents contaminations of samples as well as provides measurements of interaction forces between levitating reactors. Under a nonuniform magnetic field, diamagnetic bodies such as water droplets experience a repulsive force which may lead to diamagnetic levitation of a single or few micro-objects. The levitation of several repulsively charged picoliter droplets was successfully performed in a ~1 mm(2) adjustable flat magnetic well provided by a centimeter-sized cylindrical permanent magnet structure. Each droplet position results from the balance between the centripetal diamagnetic force and the repulsive Coulombian forces. Levitating water droplets self-organize into satellite patterns or thin clouds, according to their charge and size. Small triangular lattices of identical droplets reproduce magneto-Wigner crystals. Repulsive forces and inner charges can be measured in the piconewton and the femtocoulomb ranges, respectively. Evolution of interaction forces is accurately followed up over time during droplet evaporation.

  5. Burning Behavior of Liquid Fuel Droplets

    Directory of Open Access Journals (Sweden)

    Shah Shahood Alam

    2015-06-01

    Full Text Available Ignition of flammable liquids by hot surfaces is well known to automotive and aviation industries. However, only a limited data regarding hot surface ignition (HSI of pure and commercial fuels is available in literature. Further, relatively few studies have determined the ignition delay and to our knowledge the combustion lifetime. In the present work, we have generated results from an efficient, reproducible, yet simple experimental setup involving a liquid fuel droplet, a horizontal heated stainless steel plate and quiescent environment. Tests were conducted for diesel, biodiesel and its blends as well as vegetable oils, applied/used as single droplets under variety of conditions to the heated surface. The droplet size range was approximately between 1500 micron to 2000 micron. The objective of this experiment was to determine the minimum temperatures for HSI and also the temperatures where 100% probability of ignition was expected. Further, from this experiment, we were also able to obtain the ignition delay and droplet lifetime. As an extension to this study, a separate droplet combustion model was developed to closely study the general burning behavior of these droplets by generating temperature and species concentration profiles. The droplet mass burning rate was also determined. The results obtained in the present work were in a general agreement with the experimental and modeling observations of other studies.

  6. Electrowetting Actuation of Polydisperse Nanofluid Droplets

    Directory of Open Access Journals (Sweden)

    Crismar Patacsil

    2017-01-01

    Full Text Available We present results of electrowetting experiments employing droplets formed from aqueous suspensions of Au nanoparticles. A planar electrowetting system, consisting of a Pt wire electrode and a bottom Cu electrode with an insulating silicone layer, is used to observe changes in droplet contact angle when an external electric field is applied. The equilibrium contact angle at 0 V decreases with increasing nanoparticle concentration, dropping from 100.4° for pure deionized water to 94.7° for a 0.5 μM nanofluid. Increasing the nanoparticle content also lowers the required voltage for effective actuation. With actuation at 15 V, contact angle decreases by 9% and 35% for droplets formed from pure water and a 0.5 μM nanoparticle suspension, respectively. Contact angle saturation is observed with nanofluid droplets, with the threshold voltage decreasing as nanoparticle concentration rises. Maximum droplet actuation before contact angle saturation is achieved at only 10 V for a concentration of 0.5 μM. A proposed mechanism for the enhanced electrowetting response of a nanofluid droplet involves a reduction in surface tension of the droplet as nanoparticles accumulate at the liquid-vapor interface.

  7. Three dimensional force balance of asymmetric droplets

    Science.gov (United States)

    Kim, Yeseul; Lim, Su Jin; Cho, Kun; Weon, Byung Mook

    2016-11-01

    An equilibrium contact angle of a droplet is determined by a horizontal force balance among vapor, liquid, and solid, which is known as Young's law. Conventional wetting law is valid only for axis-symmetric droplets, whereas real droplets are often asymmetric. Here we show that three-dimensional geometry must be considered for a force balance for asymmetric droplets. By visualizing asymmetric droplets placed on a free-standing membrane in air with X-ray microscopy, we are able to identify that force balances in one side and in other side control pinning behaviors during evaporation of droplets. We find that X-ray microscopy is powerful for realizing the three-dimensional force balance, which would be essential in interpretation and manipulation of wetting, spreading, and drying dynamics for asymmetric droplets. This research was supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (NRF-2016R1D1A1B01007133).

  8. Mechanical vibration of viscoelastic liquid droplets

    Science.gov (United States)

    Sharp, James; Harrold, Victoria

    2014-03-01

    The resonant vibrations of viscoelastic sessile droplets supported on different substrates were monitored using a simple laser light scattering technique. In these experiments, laser light was reflected from the surfaces of droplets of high Mw poly acrylamide-co-acrylic acid (PAA) dissolved in water. The scattered light was allowed to fall on the surface of a photodiode detector and a mechanical impulse was applied to the drops using a vibration motor mounted beneath the substrates. The mechanical impulse caused the droplets to vibrate and the scattered light moved across the surface of the photodiode. The resulting time dependent photodiode signal was then Fourier transformed to obtain the mechanical vibrational spectra of the droplets. The frequencies and widths of the resonant peaks were extracted for droplets containing different concentrations of PAA and with a range of sizes. This was repeated for PAA loaded water drops on surfaces which displayed different values of the three phase contact angle. The results were compared to a simple model of droplet vibration which considers the formation of standing wave states on the surface of a viscoelastic droplet. We gratefully acknowledge the support of the Leverhulme trust under grant number RPG-2012-702.

  9. Development of high effectiveness droplet heat exchangers

    Science.gov (United States)

    Thayer, W. J., III; Sekins, K. M.; Bruckner, A. P.

    1985-04-01

    An experimental and analytical investigation has been carried out to assess the feasibility of developing high effectiveness, high temperature droplet heat exchangers and to identify practical applications for this type of direct contact heat exchanger. The droplet heat exchanger (DHX) concept studies uses a counterflowing gas and droplet configuration, uniformly sized droplets or particles, and a uniform dispersion of droplets in gas to achieve high heat exchanger effectiveness. Direct contact between the heat transfer media eliminates the solid heat transfer surfaces that are used in conventional heat exchangers and is expected to make very high temperature heat transfer practical. Low temperature simulation tests and analysis have been used to demonstrate that uniformly sized droplets can be generated over a wide range of fluid properties and operating conditions appropriate for high temperature droplet heat exchanger applications. One- and two-dimensional, two-phase flow and heat transfer computer models have been developed and used to characterize both individual component configurations and overall DHX heat transfer rates and effectiveness. The computer model and test data began to diverge as the operating pressure was increased, indicating a need for more general transport rate correlations and a better understanding of the two-phase flows that govern DHX operation.

  10. Fast-Track, One-Step E. coli Detection: A Miniaturized Hydrogel Array Permits Specific Direct PCR and DNA Hybridization while Amplification.

    Science.gov (United States)

    Beyer, Antje; Pollok, Sibyll; Rudloff, Anne; Cialla-May, Dana; Weber, Karina; Popp, Jürgen

    2016-09-01

    A timesaving and convenient method for bacterial detection based on one-step, one-tube deoxyribonucleic acid (DNA) hybridization on hydrogel array while target gene amplification is described. The hydrogel array is generated by a fast one-pot synthesis, where N,N'-dimethylacrylamide/polyethyleneglycol(PEG1900 )-bisacrylamide mixture polymerizes via radical photoinitiation by visible light within 20 min concomitant with in situ capture probe immobilization. These DNA-functionalized hydrogel droplets arrayed on a planar glass surface are placed in the polymerase chain reaction (PCR) mixture during the thermal amplification cycles. The bacterial cells can be implemented in a direct PCR reaction, omitting the need for prior template DNA extraction. The resulting fluorescence signal is immediately detectable after the end of the PCR (1 h) following one short washing step by microscopy. Therefore a valid signal can be reached within 1.5 h including 10 min for pipetting and placement of the tubes and chips. The performance of this novel hydrogel DNA array was successfully proven with varying cell numbers down to a limit of 10(1) Escherichia coli cells.

  11. Photoacoustic spectral characterization of perfluorocarbon droplets

    Science.gov (United States)

    Strohm, Eric; Gorelikov, Ivan; Matsuura, Naomi; Kolios, Michael

    2012-02-01

    Perfluorocarbon droplets containing optical absorbing nanoparticles have been developed for use as theranostic agents (for both imaging and therapy) and as dual-mode contrast agents. Droplets can be used as photoacoustic contrast agents, vaporized via optical irradiation, then the resulting bubbles can be used as ultrasound imaging and therapeutic agents. The photoacoustic signals from micron-sized droplets containing silica coated gold nanospheres were measured using ultra-high frequencies (100-1000 MHz). The spectra of droplets embedded in a gelatin phantom were compared to a theoretical model which calculates the pressure wave from a spherical homogenous liquid undergoing thermoelastic expansion resulting from laser absorption. The location of the spectral features of the theoretical model and experimental spectra were in agreement after accounting for increases in the droplet sound speed with frequency. The agreement between experiment and model indicate that droplets (which have negligible optical absorption in the visible and infrared spectra by themselves) emitted pressure waves related to the droplet composition and size, and was independent of the physical characteristics of the optical absorbing nanoparticles. The diameter of individual droplets was calculated using three independent methods: the time domain photoacoustic signal, the time domain pulse echo ultrasound signal, and a fit to the photoacoustic model, then compared to the diameter as measured by optical microscopy. It was found the photoacoustic and ultrasound methods calculated diameters an average of 2.6% of each other, and 8.8% lower than that measured using optical microscopy. The discrepancy between the calculated diameters and the optical measurements may be due to the difficulty in resolving the droplet edges after being embedded in the translucent gelatin medium.

  12. High Velocity Droplet Rebound On Liquid Pools

    Science.gov (United States)

    Doak, William; Laiacona, Danielle; Chiarot, Paul; German, Guy

    2015-11-01

    Rebound of high velocity, periodic droplet streams off viscous liquid pools is studied experimentally. Droplets, approximately 60 micrometers in diameter, impact the oil surface at velocities up to 13 m/s and at angles between 2-25 degrees. The oil surface does not degrade or lose its ability to provide rebound even after millions of droplet impacts. The oil was varied to examine the effect that surface tension and viscosity had on droplet rebound. Stable rebound is achievable on oils varying in dynamic viscosity in the range 13-970 Pa.s and surface tensions in the range 19-28 mN/m. When rebound occurs, a consistent 29% loss of droplet kinetic energy is observed. This is a surprising relationship due to the fact that it holds true for all cases of stable rebound regardless of the oil used. We further observe an upper inertial limit where droplets no longer provide stable rebound and instead become fully entrained in the oil pool. This limit is governed by the Rayleigh-Plateau instability and can be characterized and predicted using a modified version of the Weber number. The droplet rebound presented in this study is unique due to the size, velocity, and frequency of the droplets used. Another unique feature is that the rebound manifests itself as an effectively static phenomenon. No motion of the interface - oscillations, waves, or otherwise - was observed during rebound. The quasi-static nature of rebound enabled distinctions to be made regarding energy dissipation and the transition from droplet rebound to entrainment.

  13. Commercialization of hydrogel for topical anesthesia by irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Nho, Youngchang; Kang, Philhyun; Lim, Younmook; Gwon, Huijeong; Park, Jongseok

    2013-09-15

    - The technologies to develop topical asesthetic hydrogels were developed and the preliminary clinical test was carried out for the prepared hydrogels at Kyunghee University. - The topical asesthetic hydrogels made by radiation are founded to have appropriate strengths and accelerant delivery behavior for lidocane which has a function of anesthetic. - New type of Hydrogels were designed in these experiments so that they had voids in hydrogels which led to much more absorption of exudate. - Several companies and Philippine Nuclear Research Institute(PNRI) are interested in our technologies to produce the hydrogels, we signed a MOA to support PNRI technically in the field of hydrogels and perform the general technical cooperation between Advanced Radiation Technology and PNRI.

  14. Thermoresponsive chitosan-agarose hydrogel for skin regeneration.

    Science.gov (United States)

    Miguel, Sónia P; Ribeiro, Maximiano P; Brancal, Hugo; Coutinho, Paula; Correia, Ilídio J

    2014-10-13

    Healing enhancement and pain control are critical issues on wound management. So far, different wound dressings have been developed. Among them, hydrogels are the most applied. Herein, a thermoresponsive hydrogel was produced using chitosan (deacetylation degree 95%) and agarose. Hydrogel bactericidal activity, biocompatibility, morphology, porosity and wettability were characterized by confocal microscopy, MTS assay and SEM. The performance of the hydrogel in the wound healing process was evaluated through in vivo assays, during 21 days. The attained results revealed that hydrogel has a pore size (90-400 μm) compatible with cellular internalization and proliferation. A bactericidal activity was observed for hydrogels containing more than 188 μg/mL of chitosan. The improved healing and the lack of a reactive or a granulomatous inflammatory reaction in skin lesions treated with hydrogel demonstrate its suitability to be used in a near future as a wound dressing.

  15. Hydrogels: a journey from diapers to gene delivery.

    Science.gov (United States)

    Chawla, Pooja; Srivastava, Alok Ranjan; Pandey, Priyanka; Chawla, Viney

    2014-02-01

    Hydrogels are the biomaterials comprising network of natural or synthetic polymers capable of absorbing large amount of water. Hydrogels are "Smart Gels" or "Intelligent Gels" which can be made to respond to the various environmental conditions like temperature, pH, magnetic/electric field, ionic strength, inflammation, external stress etc. There are numerous potential applications of hydrogels in modern day life ranging from a diaper to gene delivery. This review succinctly describes the classification, properties and preparation methods along with numerous diverse applications of hydrogels like agricultural hydrogels, hydrogel for drug delivery, sensing, dental adhesives, wound healing and tissue regeneration, diet aid and gastric retention and in tissue engineering etc. Hydrogels can be regarded as highly valuable biomaterials for human-beings.

  16. Radiation processed hydrogel of poly (vinyl alcohol) with biodegradable polysaccharides.

    Science.gov (United States)

    Chowdhury, M N K; Alam, A K M M; Dafader, N C; Haque, M E; Akhtar, F; Ahmed, M U; Rashid, H; Begum, R

    2006-01-01

    Poly(vinyl alcohol) (PVA) can be modified to polymer hydrogels by radiation crosslinking and can be used in different biomedical applications. A study was done on the optimization of ingredients concentration for preparing good quality PVA hydrogels with natural polysaccharides. The synthesized hydrogels were also characterized by measuring the different physical properties e.g. gel fraction, swelling and absorption rate. Besides these, sterility test were also performed. Good quality hydrogels were obtained from PVA and natural polysaccharides solutions with 27 kGy radiation dose. There is an influence of natural polysaccharides on the gel fraction of hydrogel. The increase in the amount of polysaccharide causes a decrease in gel fraction that is decrease in the crosslinking density of PVA hydrogel network. The prepared hydrogels were found to be sterile.

  17. pH-Sensitive Hydrogel for Micro-Fluidic Valve

    Directory of Open Access Journals (Sweden)

    Zhengzhi Yang

    2012-07-01

    Full Text Available The deformation behavior of a pH-sensitive hydrogel micro-fluidic valve system is investigated using inhomogeneous gel deformation theory, in which the fluid-structure interaction (FSI of the gel solid and fluid flow in the pipe is considered. We use a finite element method with a well adopted hydrogel constitutive equation, which is coded in commercial software, ABAQUS, to simulate the hydrogel valve swelling deformation, while FLUENT is adopted to model the fluid flow in the pipe of the hydrogel valve system. The study demonstrates that FSI significantly affects the gel swelling deformed shapes, fluid flow pressure and velocity patterns. FSI has to be considered in the study on fluid flow regulated by hydrogel microfluidic valve. The study provides a more accurate and adoptable model for future design of new pH-sensitive hydrogel valves, and also gives a useful guideline for further studies on hydrogel fluidic applications.

  18. From Single Droplet to Column Design

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The technique state to design counter-current extraction columns is based on the performance of pilot plant experiments. The modelling is then either with the equilibrium or dispersion model, whereas in the latter the dispersion coefficient accounts for all hydrodynamic non-idealities. A new approach uses single droplet experiments to obtain the basic laws and functions governing droplet breakage, coalescence,relative velocity, and axial dispersion when using droplet populance balance models (DPBM). The hydrodynamics simulation results show that the mean Sauter diameter, hold-up, and concentration profiles could be well predicted, which promotes the use of DPBM models for further applications in industrial scale.

  19. Electronically droplet energy harvesting using piezoelectric cantilevers

    KAUST Repository

    Al Ahmad, Mahmoud Al

    2012-01-01

    A report is presented on free falling droplet energy harvesting using piezoelectric cantilevers. The harvester incorporates a multimorph clamped-free cantilever which is composed of five layers of lead zirconate titanate piezoelectric thick films. During the impact, the droplet kinetic energy is transferred into the form of mechanical stress forcing the piezoelectric structure to vibrate. Experimental results show energy of 0.3 μJ per droplet. The scenario of moderate falling drop intensity, i.e. 230 drops per second, yields a total energy of 400 μJ. © 2012 The Institution of Engineering and Technology.

  20. Orbiting droplets on a vibrated bath

    Science.gov (United States)

    Sampara, Naresh; Burger, Loic; Gilet, Tristan; Microfluidics, university of liege Team

    2015-11-01

    A millimeter-sized oil droplet can bounce on a vertically vibrated liquid bath for unlimited time. It may couple to the surface wave it emits; leading to horizontal self-propulsion called walking. When several walkers coexist close to one another, they either repel or attract each other, in response to the superposition of the waves they generate. Attraction leads to various bound states, including droplets that orbit around each other. We have experimentally investigated the variety of quantized orbital motions exhibited by two, three and more identical walkers, as a function of forcing acceleration. Each motion is quantified in terms of droplet and wave energy.

  1. Nonisothermal desorption of droplets of complex compositions

    Directory of Open Access Journals (Sweden)

    Nakoryakov Vladimir E.

    2012-01-01

    Full Text Available This paper presents the process of nonstationary evaporation of aqueous solutions of LiBr-H2O, CaCl2-H2O, NaCl-H2O droplets on a horizontal heating surface. The following typical stages of heat and mass transfer depending on wall temperature have been considered: evaporation below boiling temperature and nucleate boiling. The significant decrease in desorption intensity with a rise of initial mass concentration of salt has been observed. Formation of a surface crystallization front at evaporation of a droplet has been detected. We have developed the experimental method for direct measurements of the mass of evaporating droplet.

  2. Controlled Angiogenesis in Peptide Nanofiber Composite Hydrogels.

    Science.gov (United States)

    Wickremasinghe, Navindee C; Kumar, Vivek A; Shi, Siyu; Hartgerink, Jeffrey D

    2015-09-14

    Multidomain peptide (MDP) nanofibers create scaffolds that can present bioactive cues to promote biological responses. Orthogonal self-assembly of MDPs and growth-factor-loaded liposomes generate supramolecular composite hydrogels. These composites can act as delivery vehicles with time-controlled release. Here we examine the controlled release of placental growth factor-1 (PlGF-1) for its ability to induce angiogenic responses. PlGF-1 was loaded either in MDP matrices or within liposomes bound inside MDP matrices. Scaffolds showed expected rapid infiltration of macrophages. When released through liposomes incorporated in MDP gels (MDP(Lipo)), PlGF-1 modulates HUVEC VEGF receptor activation in vitro and robust vessel formation in vivo. These loaded MDP(Lipo) hydrogels induce a high level of growth-factor-mediated neovascular maturity. MDP(Lipo) hydrogels offer a biocompatible and injectable platform to tailor drug delivery and treat ischemic tissue diseases.

  3. Antimicrobial hydrogels for the treatment of infection.

    Science.gov (United States)

    Veiga, Ana Salomé; Schneider, Joel P

    2013-11-01

    The increasing prevalence of microbial infections, especially those associated with impaired wound healing and biomedical implant failure has spurred the development of new materials having antimicrobial activity. Hydrogels are a class of highly hydrated material finding use in diverse medical applications such as drug delivery, tissue engineering, as wound fillers, and as implant coatings, to name a few. The biocompatible nature of many gels make them a convenient starting platform to develop selectively active antimicrobial materials. Hydrogels with antimicrobial properties can be obtained through the encapsulation or covalent immobilization of known antimicrobial agents, or the material itself can be designed to possess inherent antimicrobial activity. In this review we present an overview of antimicrobial hydrogels that have recently been developed and when possible provide a discussion relevant to their mechanism of action.

  4. Influence of clay particles on microfluidic-based preparation of hydrogel composite microsphere

    Science.gov (United States)

    Hong, Joung Sook

    2016-05-01

    For the successful fabrication of a hydrogel composite microsphere, this study aimed to investigate the influence of clay particles on microsphere formation in a microfluidic device which has flow focusing and a 4.5:1 contraction channel. A poly alginic acid solution (2.0 wt.%) with clay particles was used as the dispersed phase to generate drops in an oil medium, which then merged with drops of a CaCl2 solution for gelation. Drop generations were observed with different flow rates and particles types. When the flow rate increased, drop generation was enhanced and drop size decreased by the build-up of more favorable hydrodynamic flow conditions to detach the droplets. The addition of a small amount of particles insignificantly changed the drop generation behavior even though it reduced interfacial tension and increased the viscosity of the solution. Instead, clays particles significantly affected hydro-gelation depending on the hydrophobicity of particles, which produced further heterogeneity in the shape and size of microsphere.

  5. Analysis of droplet jumping phenomenon with lattice Boltzmann simulation of droplet coalescence

    Science.gov (United States)

    Peng, Benli; Wang, Sifang; Lan, Zhong; Xu, Wei; Wen, Rongfu; Ma, Xuehu

    2013-04-01

    Droplet jumping from condensing surfaces induced by droplet coalescence during dropwise condensation of mixed steam on a superhydrophobic surface can significantly enhance condensation heat transfer of mixed steam with non-condensable gas. This phenomenon was visually observed and theoretically analyzed in the present paper. The dynamic evolution of droplet and the velocity distribution inside the droplet during coalescence were simulated using multiphase lattice Boltzmann method. The energy distribution released by droplet coalescence was calculated statistically, and the jumping height induced by droplet coalescence on a superhydrophobic surface was predicted based on the energy conservation method. The theoretical predictions obtained by the modified model proposed in this paper agree well with the experimental observations.

  6. The effects of turbulence on droplet drag and secondary droplet breakup

    Science.gov (United States)

    Song, Y.-H.; Coy, E.; Greenfield, S.; Ondas, M.; Prevish, T.; Spegar, T.; Santavicca, D.

    1994-01-01

    The objective of this research is to obtain an improved understanding of the behavior of droplets in vaporizing sprays, particularly under conditions typical of those in high pressure rocket sprays. Experiments are conducted in a variety of high pressure, high temperature, optically-accessible flow systems, including one which is capable of operation at pressures up to 70 atm, temperatures up to 600 K, gas velocities up to 30 m/sec and turbulence intensities up to 40 percent. Single droplets, 50 to 500 micron in diameter, are produced by an aerodynamic droplet generator and transversely injected into the flow. Measurements are made of the droplet position, size, velocity and temperature and of the droplet's vapor wake from which droplet drag, dispersion, heating, vaporization and breakup are characterized.

  7. Self-propelled oil droplets consuming "fuel" surfactant

    DEFF Research Database (Denmark)

    Toyota, Taro; Maru, Naoto; Hanczyc, Martin M

    2009-01-01

    A micrometer-sized oil droplet of 4-octylaniline containing 5 mol % of an amphiphilic catalyst exhibited a self-propelled motion, producing tiny oil droplets, in an aqueous dispersion of an amphiphilic precursor of 4-octylaniline. The tiny droplets on the surface of the self-propelled droplet wer...

  8. Injectable silk-polyethylene glycol hydrogels.

    Science.gov (United States)

    Wang, Xiaoqin; Partlow, Benjamin; Liu, Jian; Zheng, Zhaozhu; Su, Bo; Wang, Yansong; Kaplan, David L

    2015-01-01

    Silk hydrogels for tissue repair are usually pre-formed via chemical or physical treatments from silk solutions. For many medical applications, it is desirable to utilize injectable silk hydrogels at high concentrations (>8%) to avoid surgical implantation and to achieve slow in vivo degradation of the gel. In the present study, injectable silk solutions that formed hydrogels in situ were generated by mixing silk with low-molecular-weight polyethylene glycol (PEG), especially PEG300 and 400 (molecular weight 300 and 400g mol(-1)). Gelation time was dependent on the concentration and molecular weight of PEG. When the concentration of PEG in the gel reached 40-45%, gelation time was less than 30min, as revealed by measurements of optical density and rheological studies, with kinetics of PEG400 faster than PEG300. Gelation was accompanied by structural changes in silk, leading to the conversion from random coil in solution to crystalline β-sheets in the gels, based on circular dichroism, attenuated total reflection Fourier transform infrared spectroscopy and X-ray diffraction. The modulus (127.5kPa) and yield strength (11.5kPa) determined were comparable to those of sonication-induced hydrogels at the same concentrations of silk. The time-dependent injectability of 15% PEG-silk hydrogel through 27G needles showed a gradual increase of compression forces from ∼10 to 50N within 60min. The growth of human mesenchymal stem cells on the PEG-silk hydrogels was hindered, likely due to the presence of PEG, which grew after a 5 day delay, presumably while the PEG solubilized away from the gel. When 5% PEG-silk hydrogel was subcutaneously injected in rats, significant degradation and tissue in-growth took place after 20 days, as revealed by ultrasound imaging and histological analysis. No significant inflammation around the gel was observed. The features of injectability, slow degradation and low initial cell attachment suggests that these PEG-silk hydrogels are of interest

  9. Application of hydrogel system for neutron attenuation

    CERN Document Server

    Gupta, S C; Gupta, B P

    2000-01-01

    Hydrogel sheets based on poly(vinyl alcohol) (PVA) and poly(vinyl acetate) (PVAc) have been prepared by the technique of acetalization of PVA using formaldehyde and grafting of acrylic acid onto PVAc by gamma irradiation. PVA hydrogel (PVAB) sheets have been prepared in geometrically stable shapes by compression moulding process and characterised for their thermal properties, geometrical stability on water absorption, and neutron shielding efficiency. The effective protection from fast neutrons can be increased by a factor of 18% by swelling the PVAB sheets to 210% in water. The water intake and subsequent retention of water by the sheet can be tailored as per shielding requirements.

  10. Quasistatic packings of droplets in flat microfluidic channels

    Science.gov (United States)

    Kadivar, Erfan

    2016-02-01

    As observed in recent experiments, monodisperse droplets self-assemble spontaneously in different ordered packings. In this work, we present a numerical study of the droplet packings in the flat rectangular microfluidic channels. Employing the boundary element method, we numerically solve the Stokes equation in two-dimension and investigate the appearance of droplet packing and transition between one and two-row packings of monodisperse emulsion droplets. By calculating packing force applied on the droplet interface, we investigate the effect of flow rate, droplet size, and surface tension on the packing configurations of droplets and transition between different topological packings.

  11. The synthesis of hydrogels with controlled distribution of polymer brushes in hydrogel network

    Energy Technology Data Exchange (ETDEWEB)

    Sun, YuWei; Zhou, Chao; Zhang, AoKai; Xu, LiQun; Yao, Fang [School of Chemistry and Chemical Engineering, Southeast University, Jiangning District, Nanjing, Jiangsu Province, 211189 (China); Cen, Lian, E-mail: cenlian@hotmail.com [National Tissue Engineering Center of China, No.68, East Jiang Chuan Road, Shanghai, 200241 (China); School of Chemical Engineering, East China University of Science and Technology, No.130, Mei Long Road, Shanghai, 200237 (China); Fu, Guo-Dong, E-mail: fu7352@seu.edu.cn [School of Chemistry and Chemical Engineering, Southeast University, Jiangning District, Nanjing, Jiangsu Province, 211189 (China)

    2014-11-30

    Highlights: • Many biological tissues are 3-dimensionally asymmetric in structure and properties, it would be desirable if hydrogels could bear such structural similarity with specialized surface and bulk properties. Moreover, gradual but continuous variation in spatial structural and property is also a common phenomenon in biological tissues, such as interfaces between bone and tendon, or between bone and cartilage. Hence, the development of a method to introduce well-defined functional polymer brushes on PEG hydrogels, especially with precisely controlled spatial structure in 3-dimensions, would impart the hydrogels with special functionalities and wider applications. Poly(ethylene glycol) (PEG) hydrogels with 3-dimensionally controlled well-defined poly(N-isopropylacrylamide) (poly(NIPAAm)) brushes were prepared by combined copper(I)-catalyzed azide-alkyne cycloaddition (“Click Chemistry”) and atom transfer radical polymerization (ATRP). The resulting hydrogels were presented as representatives with their detailed synthesis routes and characterization. H{sub PEG}-S-poly(NIPAAm) is a hydrogel with poly(NIPAAm) brushes mainly grafted on surface, whereas H{sub PEG}-G-poly(NIPAAm) has a gradiently decreased poly(NIPAAm) brushes in their chain length from surface to inside. On the other hand, poly(NIPAAm) brushes in H{sub PEG}-U-poly(NIPAAm) are uniformly dispersed throughout the whole hydrogel network. Successful preparation of H{sub PEG}-S-poly(NIPAAm), H{sub PEG}-G-poly(NIPAAm) and H{sub PEG}-U-poly(NIPAAm) were ascertained by X-ray photoelectron spectroscopy (XPS) and water contact angle measurement. Hence, the flexibility and controllability of the synthetic strategy in varying the distribution of polymer brushes and hydrogel surface properties was demonstrated. Hydrogels with tunable and well-defined 3-dimensional poly(NIPAAm) polymer brushes could be tailor-designed to find potential applications in smart devices or skin dressing, such as for diabetics

  12. Electrostatic charging and control of droplets in microfluidic devices.

    Science.gov (United States)

    Zhou, Hongbo; Yao, Shuhuai

    2013-03-07

    Precharged droplets can facilitate manipulation and control of low-volume liquids in droplet-based microfluidics. In this paper, we demonstrate non-contact electrostatic charging of droplets by polarizing a neutral droplet and splitting it into two oppositely charged daughter droplets in a T-junction microchannel. We performed numerical simulation to analyze the non-contact charging process and proposed a new design with a notch at the T-junction in aid of droplet splitting for more efficient charging. We experimentally characterized the induced charge in droplets in microfabricated devices. The experimental results agreed well with the simulation. Finally, we demonstrated highly effective droplet manipulation in a path selection unit appending to the droplet charging. We expect our work could enable precision manipulation of droplets for more complex liquid handling in microfluidics and promote electric-force based manipulation in 'lab-on-a-chip' systems.

  13. The role of the droplet deformations in the bouncing droplet dynamics

    Science.gov (United States)

    Terwagne, D.; Ludewig, F.; Vandewalle, N.; Dorbolo, S.

    2013-12-01

    Droplets bouncing on a vibrated liquid bath open ways to methods of manipulating droplets, creating double emulsion, and performing pilot wave model experiments. In this work, we focus on the role of the droplet deformations in the vertical bouncing dynamics by neglecting the deformation of the surface of the bath. To be under this favorable condition, low viscous oil droplets are dropped over a highly viscous oil bath that is vibrated. These droplets bounce vertically on the surface of the bath and exhibit many periodic trajectories and resonant modes when tuning the forcing parameters, i.e., the oscillation of the bath. This complex dynamics emphasizes the interplay between elastic energy storage and energy dissipation in droplets at each bounce. We propose to model droplets using a bouncing mass-spring-damper system that mimics a deformable droplet bouncing on a non-deformable liquid bath. From the experimental measurements, we constructed bifurcation diagrams of the bouncing trajectories and challenged our bouncing spring model. The agreement between experiment and the spring model reveals that this model can be used to rationalize and predict a variety of bouncing droplets behaviors involving multi-periodicities.

  14. Droplet Microfluidics for Chip-Based Diagnostics

    Directory of Open Access Journals (Sweden)

    Karan V. I. S. Kaler

    2014-12-01

    Full Text Available Droplet microfluidics (DMF is a fluidic handling technology that enables precision control over dispensing and subsequent manipulation of droplets in the volume range of microliters to picoliters, on a micro-fabricated device. There are several different droplet actuation methods, all of which can generate external stimuli, to either actively or passively control the shape and positioning of fluidic droplets over patterned substrates. In this review article, we focus on the operation and utility of electro-actuation-based DMF devices, which utilize one or more micro-/nano-patterned substrates to facilitate electric field-based handling of chemical and/or biological samples. The underlying theory of DMF actuations, device fabrication methods and integration of optical and opto-electronic detectors is discussed in this review. Example applications of such electro-actuation-based DMF devices have also been included, illustrating the various actuation methods and their utility in conducting chip-based laboratory and clinical diagnostic assays.

  15. Immersed Boundary Simulations of Active Fluid Droplets

    CERN Document Server

    Whitfield, Carl A

    2016-01-01

    We present numerical simulations of active fluid droplets immersed in an external fluid in 2-dimensions. We use an Immersed Boundary method to simulate the fluid droplet interface as a Lagrangian mesh. We present results from two example systems, firstly a droplet filled with an active polar fluid with polar anchoring at the droplet interface. Secondly, an active isotropic fluid consisting of particles that can bind and unbind from the interface and generate surface tension gradients through active contractility. These two systems demonstrate spontaneous symmetry breaking and steady state dynamics resembling cell motility and division and show complex feedback mechanisms with minimal degrees of freedom. The simulations outlined here will be useful for quantifying the wide range of dynamics observable in these active systems and modelling the effects of confinement in a consistent and adaptable way.

  16. Manipulation of microfluidic droplets by electrorheological fluid

    KAUST Repository

    Zhang, Menying

    2009-09-01

    Microfluidics, especially droplet microfluidics, attracts more and more researchers from diverse fields, because it requires fewer materials and less time, produces less waste and has the potential of highly integrated and computer-controlled reaction processes for chemistry and biology. Electrorheological fluid, especially giant electrorheological fluid (GERF), which is considered as a kind of smart material, has been applied to the microfluidic systems to achieve active and precise control of fluid by electrical signal. In this review article, we will introduce recent results of microfluidic droplet manipulation, GERF and some pertinent achievements by introducing GERF into microfluidic system: digital generation, manipulation of "smart droplets" and droplet manipulation by GERF. Once it is combined with real-time detection, integrated chip with multiple functions can be realized. © 2009 Wiley-VCH Verlag GmbH & Co. KGaA.

  17. Dynamics of bouncing droplets in annular cavities

    Science.gov (United States)

    Lentz, Zachary Louis; Jalali, Mir Abbas; Alam, Mohammad-Reza

    2014-11-01

    In a cylindrical bath of silicon oil, vertically excited by a frequency of 45 Hz, we trace the motion of bouncing droplets as they fill an annular region. We compute the mean tangential and radial velocity components of the droplets and show that the maximum tangential velocity is larger than the maximum radial velocity by one order of magnitude. Velocity dispersions have almost equal levels in the radial and tangential directions, and their mean values are 1/4 times smaller than the mean tangential velocity. These results show that bouncing droplets undergo random motions within annular cavities determined by the interference patterns of self-induced circumferential waves. We derive analytical relations between the velocity dispersion and the wavelength of surface waves, and calculate the mean tangential velocity of droplets using the random kicks that they experience at the boundaries of the cavity by inward and outward traveling waves.

  18. Capillary droplets on Leidenfrost micro-ratchets

    CERN Document Server

    Marin, Alvaro G; Römer, Gertwillem R B E; Pathiraj, B; Veld, Albertus Huis in 't; Lohse, Detlef

    2012-01-01

    Leidenfrost ratchets are structures with the ability of transporting liquid droplets when heated over the critical Leidenfrost temperature. Once this temperature is reached, the droplet levitates over the surface and moves in the direction marked by the slope of the ratchet at terminal velocities around 10 cm/s. Here we provide new experiments with micron-sized ratchets, which have been produced with picosecond pulse laser ablation. In the following work, we use a simple method to measure the thrust driving droplets of capillary size over the micro-ratchets. The mechanism responsible for the force acting on the drop on superheated ratchets has been recently under debate. We extend the recently proposed 'viscous mechanism' proposed by Dupeaux et al. [Europhys. Lett., 96, 58001 (2011)] to capillary droplets and find good agreement with our measurements.

  19. Dispensing nano-pico droplets of ferrofluids

    Science.gov (United States)

    Irajizad, Peyman; Farokhnia, Nazanin; Ghasemi, Hadi

    2015-11-01

    Dispensing miniature volumes of a ferrofluid is of fundamental and practical importance for diverse applications ranging from biomedical devices, optics, and self-assembly of materials. Current dispensing systems are based on microfluidics flow-focusing approaches or acoustic actuation requiring complicated structures. A simple method is presented to continuously dispense the miniature droplets from a ferrofluid reservoir. Once a jet of the ferrofluid is subjected to a constrained flux through a membrane and an inhomogeneous magnetic field, the jet experiences a curvature-driven instability and transforms to a droplet. Ferrofluid droplets in the range of 0.1-1000 nl are dispensed with tunable dispensing frequencies. A model is developed that predicts the dispensed volume of the ferrofluid droplets with an excellent agreement with the measurements.

  20. Catching proteins in liquid helium droplets

    CERN Document Server

    Kupser, Peter; Meijer, Gerard; von Helden, Gert

    2010-01-01

    An experimental approach is presented that allows for the incorporation of large mass/charge selected ions in liquid helium droplets. It is demonstrated that droplets can be efficiently doped with a mass/charge selected amino acid as well as with the much bigger m$\\approx$12 000 amu protein Cytochrome C in selected charge states. The sizes of the ion-doped droplets are determined via electrostatic deflection. Under the experimental conditions employed, the observed droplet sizes are very large and range, dependent on the incorporated ion, from 10$^{10}$ helium atoms for protonated Phenylalanine to 10$^{12}$ helium atoms for Cytochrome C. As a possible explanation, a simple model based on the size- and internal energy-dependence of the pickup efficiency is given.

  1. Janus droplet as a catalytic micromotor

    CERN Document Server

    Shklyaev, Sergey

    2015-01-01

    Self-propulsion of a Janus droplet in a solution of surfactant, which reacts on a half of a drop surface, is studied theoretically. The droplet acts as a catalytic motor creating a concentration gradient, which generates its surface-tension-driven motion; the self-propulsion speed is rather high, $60\\; {\\rm \\mu m/s}$ and more. This catalytic motor has several advantages over other micromotors: simple manufacturing, easily attained neutral buoyancy. In contrast to a single-fluid droplet, which demonstrates a self-propulsion as a result of symmetry breaking instability, for Janus one no stability threshold exists; hence, the droplet radius can be scaled down to micrometers. The paper was finalized and submitted by Denis S. Goldobin after Sergey Sklyaev had sadly passed away on June 2, 2014.

  2. Manipulation of microfluidic droplets by electrorheological fluid.

    Science.gov (United States)

    Zhang, Menying; Gong, Xiuqing; Wen, Weijia

    2009-09-01

    Microfluidics, especially droplet microfluidics, attracts more and more researchers from diverse fields, because it requires fewer materials and less time, produces less waste and has the potential of highly integrated and computer-controlled reaction processes for chemistry and biology. Electrorheological fluid, especially giant electrorheological fluid (GERF), which is considered as a kind of smart material, has been applied to the microfluidic systems to achieve active and precise control of fluid by electrical signal. In this review article, we will introduce recent results of microfluidic droplet manipulation, GERF and some pertinent achievements by introducing GERF into microfluidic system: digital generation, manipulation of "smart droplets" and droplet manipulation by GERF. Once it is combined with real-time detection, integrated chip with multiple functions can be realized.

  3. Micro-droplets lubrication film thickness dynamics

    Science.gov (United States)

    Huerre, Axel; Theodoly, Olivier; Cantat, Isabelle; Leshansky, Alexander; Valignat, Marie-Pierre; Jullien, Marie-Caroline; MMN Team; LAI Team; IPR Team; Department of Chemical Engineering Team

    2014-11-01

    The motion of droplets or bubbles in confined geometries has been extensively studied; showing an intrinsic relationship between the lubrication film thickness and the droplet velocity. When capillary forces dominate, the lubrication film thickness evolves non linearly with the capillary number due to viscous dissipation between meniscus and wall. However, this film may become thin enough that intermolecular forces come into play and affect classical scalings. We report here the first experimental evidence of the disjoining pressure effect on confined droplets by measuring droplet lubrication film thicknesses in a microfluidic Hele-Shaw cell. We find and characterize two distinct dynamical regimes, dominated respectively by capillary and intermolecular forces. In the former case rolling boundary conditions at the interface are evidenced through film thickness dynamics, interface velocity measurement and film thickness profile.

  4. Programmable Electrowetting with Channels and Droplets

    OpenAIRE

    Ananda Banerjee; Joo Hyon Noh; Yuguang Liu; Philip D. Rack; Ian Papautsky

    2015-01-01

    In this work, we demonstrate continuous and discrete functions in a digital microfluidic platform in a programmed manner. Digital microfluidics is gaining popularity in biological and biomedical applications due to its ability to manipulate discrete droplet volumes (nL–pL), which significantly reduces the need for a costly and precious biological and physiological sample volume and, thus, diagnostic time. Despite the importance of discrete droplet volume handling, the ability of continuous mi...

  5. Numerical simulation of droplet impact on interfaces

    Science.gov (United States)

    Kahouadji, Lyes; Che, Zhizhao; Matar, Omar; Shin, Seungwon; Chergui, Jalel; Juric, Damir

    2015-11-01

    Simulations of three-dimensional droplet impact on interfaces are carried out using BLUE, a massively-parallel code based on a hybrid Front-Tracking/Level-Set algorithm for Lagrangian tracking of arbitrarily deformable phase interfaces. High resolution numerical results show fine details and features of droplet ejection, crown formation and rim instability observed under similar experimental conditions. EPSRC Programme Grant, MEMPHIS, EP/K0039761/1.

  6. Droplets climbing a rotating helical fiber

    CERN Document Server

    Texier, Baptiste Darbois

    2015-01-01

    A liquid droplet is placed on a rotating helical fiber. We find that the droplet may slide down, attach or climb up the fiber. We inspect experimentally the domain of existence of these three behaviors as a function of the geometrical characteristics of the fiber, its angle relatively to the horizontal, the wetting properties of the fluid and the rotating speed of the helix. A theoretical model is proposed in order to capture the boundaries of the experimental phase diagram.

  7. Combustion Behavior of Free Boron Slurry Droplets,

    Science.gov (United States)

    2014-09-26

    weak disruptive behavior while pure JP-1t burn quiescently, except for a flash extinction which occurs at the termination of combustion. The...I AD-R158 628 COMBUSTION BEHAVIOR OF FREE BORON SLURRY DROPLETS(U) i/i I PRINCETON UNIV NJ DEPT OF MECHANICAL AND AEROSPACE ENINEERIN., F TAKAHASHI...COMBUSTION BEHAVIOR OF FREE BORON SLURRY DROPLETS TAM by F. Takahashi, F.L. Dryer, and F.A. Williams Department of M~echanical and keyosase Engineering

  8. Bioinspired, biomimetic, double-enzymatic mineralization of hydrogels for bone regeneration with calcium carbonate

    DEFF Research Database (Denmark)

    Lopez-Heredia, Marco A.; Łapa, Agata; Mendes, Ana Carina Loureiro

    2017-01-01

    Hydrogels are popular materials for tissue regeneration. Incorporation of biologically active substances, e.g. enzymes, is straightforward. Hydrogel mineralization is desirable for bone regeneration. Here, hydrogels of Gellan Gum (GG), a biocompatible polysaccharide, were mineralized biomimetical...

  9. Dual Drug Release of Triamterene and Aminophylline from Poly (N-Isopropylacrylamide Hydrogels

    Directory of Open Access Journals (Sweden)

    Emilio Castro

    2012-06-01

    hydrogel decreased and increased again without reaching the initial pore size of the hydrogel, respectively. We observed that the greater the concentration of drug loaded into the hydrogel, the greater the reduction in pore size.

  10. Whole Teflon valves for handling droplets.

    Science.gov (United States)

    Cybulski, Olgierd; Jakiela, Slawomir; Garstecki, Piotr

    2016-06-21

    We propose and test a new whole-Teflon gate valve for handling droplets. The valve allows droplet plugs to pass through without disturbing them. This is possible due to the geometric design, the choice of material and lack of any pulses of flow generated by closing or opening the valve. The duct through the valve resembles a simple segment of tubing, without constrictions, change in lumen or side pockets. There are no extra sealing materials with different wettability or chemical resistance. The only material exposed to liquids is FEP Teflon, which is resistant to aggressive chemicals and fully biocompatible. The valve can be integrated into microfluidic systems: we demonstrate a complex system for culturing bacteria in hundreds of microliter droplet chemostats. The valve effectively isolates modules of the system to increase precision of operations on droplets. We verified that the valve allowed millions of droplet plugs to safely pass through, without any cross-contamination with bacteria between the droplets. The valve can be used in automating complex microfluidic systems for experiments in biochemistry, biology and organic chemistry.

  11. Predicting Droplet Formation on Centrifugal Microfluidic Platforms

    Science.gov (United States)

    Moebius, Jacob Alfred

    Centrifugal microfluidics is a widely known research tool for biological sample and water quality analysis. Currently, the standard equipment used for such diagnostic applications include slow, bulky machines controlled by multiple operators. These machines can be condensed into a smaller, faster benchtop sample-to-answer system. Sample processing is an important step taken to extract, isolate, and convert biological factors, such as nucleic acids or proteins, from a raw sample to an analyzable solution. Volume definition is one such step. The focus of this thesis is the development of a model predicting monodispersed droplet formation and the application of droplets as a technique for volume definition. First, a background of droplet microfluidic platforms is presented, along with current biological analysis technologies and the advantages of integrating such technologies onto microfluidic platforms. Second, background and theories of centrifugal microfluidics is given, followed by theories relevant to droplet emulsions. Third, fabrication techniques for centrifugal microfluidic designs are discussed. Finally, the development of a model for predicting droplet formation on the centrifugal microfluidic platform are presented for the rest of the thesis. Predicting droplet formation analytically based on the volumetric flow rates of the continuous and dispersed phases, the ratios of these two flow rates, and the interfacial tension between the continuous and dispersed phases presented many challenges, which will be discussed in this work. Experimental validation was completed using continuous phase solutions of different interfacial tensions. To conclude, prospective applications are discussed with expected challenges.

  12. Programmable Electrowetting with Channels and Droplets

    Directory of Open Access Journals (Sweden)

    Ananda Banerjee

    2015-01-01

    Full Text Available In this work, we demonstrate continuous and discrete functions in a digital microfluidic platform in a programmed manner. Digital microfluidics is gaining popularity in biological and biomedical applications due to its ability to manipulate discrete droplet volumes (nL–pL, which significantly reduces the need for a costly and precious biological and physiological sample volume and, thus, diagnostic time. Despite the importance of discrete droplet volume handling, the ability of continuous microfluidics to process larger sample volumes at a higher throughput cannot be easily reproduced by merely using droplets. To bridge this gap, in this work, parallel channels are formed and programmed to split into multiple droplets, while droplets are programmed to be split from one channel, transferred and merged into another channel. This programmable handling of channels and droplets combines the continuous and digital paradigms of microfluidics, showing the potential for a wider range of microfluidic functions to enable applications ranging from clinical diagnostics in resource-limited environments, to rapid system prototyping, to high throughput pharmaceutical applications.

  13. Mechanical vibrations of pendant liquid droplets.

    Science.gov (United States)

    Temperton, Robert H; Smith, Michael I; Sharp, James S

    2015-07-01

    A simple optical deflection technique was used to monitor the vibrations of microlitre pendant droplets of deuterium oxide, formamide, and 1,1,2,2-tetrabromoethane. Droplets of different volumes of each liquid were suspended from the end of a microlitre pipette and vibrated using a small puff of nitrogen gas. A laser was passed through the droplets and the scattered light was collected using a photodiode. Vibration of the droplets resulted in the motion of the scattered beam and time-dependent intensity variations were recorded using the photodiode. These time-dependent variations were Fourier transformed and the frequencies and widths of the mechanical droplet resonances were extracted. A simple model of vibrations in pendant/sessile drops was used to relate these parameters to the surface tension, density and viscosity of the liquid droplets. The surface tension values obtained from this method were found to be in good agreement with results obtained using the standard pendant drop technique. Damping of capillary waves on pendant drops was shown to be similar to that observed for deep liquid baths and the kinematic viscosities obtained were in agreement with literature values for all three liquids studied.

  14. Combustion of Interacting Droplet Arrays Being Studied

    Science.gov (United States)

    Dietrich, Daniel L.

    2002-01-01

    The combustion of liquid fuels is a major source of energy in the world today, and the majority of these fuels are burned in the form of a spray. This droplet combustion project at the NASA Glenn Research Center has the overall goal of providing a better understanding of spray combustion by extending existing studies of single droplets to a regime where droplet interactions are important (as occurs in a practical spray). The Combustion of Interacting Droplet Arrays is a collaborative effort between Glenn and the National Center for Microgravity Research. The group at Glenn also collaborates with scientists at the National Institute of Advanced Industrial Science and Technology in Hokkaido, Japan. The project is studying the combustion of a small number of droplets suspended on small quartz fibers in a 0.1-atm combustion chamber. Data consist primarily of video images of the flames and droplets. The tests are being conducted in Glenn's reduced-gravity facilities (2.2-sec and 5.2-sec drop towers) and in the Japan Microgravity Center's 10-sec drop tower (JAMIC).

  15. Lipid droplets, lipophagy, and beyond.

    Science.gov (United States)

    Wang, Chao-Wen

    2016-08-01

    Lipids are essential components for life. Their various structural and physical properties influence diverse cellular processes and, thereby, human health. Lipids are not genetically encoded but are synthesized and modified by complex metabolic pathways, supplying energy, membranes, signaling molecules, and hormones to affect growth, physiology, and response to environmental insults. Lipid homeostasis is crucial, such that excess fatty acids (FAs) can be harmful to cells. To prevent such lipotoxicity, cells convert excess FAs into neutral lipids for storage in organelles called lipid droplets (LDs). These organelles do not simply manage lipid storage and metabolism but also are involved in protein quality management, pathogenesis, immune responses, and, potentially, neurodegeneration. In recent years, a major trend in LD biology has centered around the physiology of lipid mobilization via lipophagy of fat stored within LDs. This review summarizes key findings in LD biology and lipophagy, offering novel insights into this rapidly growing field. This article is part of a Special Issue entitled: The cellular lipid landscape edited by Tim P. Levine and Anant K. Menon.

  16. Cloud droplet activation: solubility revisited

    Directory of Open Access Journals (Sweden)

    L. T. Padró

    2007-02-01

    Full Text Available Soluble compounds present in atmospheric aerosol facilitate their transformation into cloud droplets by depressing the equilibrium vapor pressure required for activation. Their impact depends on the amount of dissolved substance in the aerosol aqueous phase, which in turn is controlled by its solubility. This study explores the impact of particle curvature on solubility, expressed in terms of a Kelvin enhancement. The augmented solubility, termed "Curvature Enhanced Solubility" (CES, is then introduced into Köhler theory for assessment of its impact on CCN activity for several organic compounds with a wide range of aqueous solubility. The interfacial energy between solute and aqueous phase required for quantification of CES is determined from existing correlations based on bulk solubility, and concurrent measurements of contact angle and surface tension. A number of important findings arise from this study: i CES can substantially increase solubility and impact CCN activity but only if the aerosol is initially wet, ii CES can stabilize highly supersaturated solutions, and provide a mechanism for retention of an aerosol aqueous phase even at very low relative humidity (RH, and, iii trace amounts of surfactant impurities can magnify the impact of CES.

  17. An Experimental Investigation of Vibration-Induced Single Droplet Ejection.

    Science.gov (United States)

    Range, Kai; Smith, Marc K.; Glezer, Ari

    1998-11-01

    Vibration-induced droplet atomization occurs when small secondary droplets are ejected from the free surface of a larger droplet placed on a vibrating membrane. To model a single ejection event, a liquid droplet is placed on a small piston and vibrated using an electromagnetic driver. The droplet oscillates in a characteristic mode shape that depends on the driving frequency and amplitude, the properties of the liquid, and the size of the droplet. When the excitation amplitude is large enough, a small secondary droplet is ejected from the primary droplet. Observations of this process using high-speed digital video imaging show that droplet ejection occurs when a small liquid column or jet appears on the primary droplet and a secondary droplet forms on the column by a capillary-pinching mechanism. The liquid column or jet emanates from a crater in the primary droplet. As the driving frequency increases, this crater becomes smaller and the diameter of the ejected droplet decreases. We shall present results showing how the ejected droplet diameter and speed depends on the driving frequency and amplitude, the liquid properties, and the primary droplet volume.

  18. Preparation of bacterial cellulose based hydrogels and their viscoelastic behavior

    Science.gov (United States)

    Shah, Rushita; Vyroubal, Radek; Fei, Haojei; Saha, Nabanita; Kitano, Takeshi; Saha, Petr

    2015-04-01

    Bacterial cellulose (BC) based hydrogels have been prepared in blended with carboxymethylcellulose and polyvinyl pyrrolidone by using heat treatment. The properties of BC-CMC and BC-PVP hydrogels were compared with pure BC, CMC and PVP hydrogels. These hydrogels were investigated by measuring their structural, morphological and viscoelastic properties. Through the morphological images, alignment of the porous flake like structures could be seen clearly within the inter-polymeric network of the hydrogels. Also, the detail structure analysis of the polymers blended during the hydrogel formation confirms their interactions with each other were studied. Further, the viscoelastic behavior of all the hydrogels in terms of elastic and viscous property was studied. It is observed that at 1% strain, including CMC and PVP hydrogels, all the BC based hydrogels exhibited the linear trend throughout. Also the elastic nature of the material remains high compared to viscous nature. Moreover, the changes could be noticed in case of blended polymer based hydrogels. The values of complex viscosity (η*) decreases with increase in angular frequency within the range of ω = 0.1-100 rad.s-1.

  19. Polymer Micelles Laden Hydrogel Contact Lenses for Ophthalmic Drug Delivery.

    Science.gov (United States)

    Hu, Xiaohong; Tan, Huaping; Chen, Pin; Wang, Xin; Pang, Juan

    2016-06-01

    Hydrogel contact lens is an attractive drug carrier for the delivery of ophthalmic drugs. But limited drug loading capacity and burst release restricted its application in this field. Polymer micelle laden hydrogel contact lenses were designed for ophthalmic drug delivery in the work. β-CD/PAA/PEG ternary system was chosen to form polymer micelle. The micelle size could be adjusted by β-CD content and PAA/PEG concentration. The zeta potential of micelle was irrelevant to β-CD content, but influenced by PAA/PEG concentration. The absorbed drug concentration in micelle solution depended on both β-CD content and PAA/PEG concentration. Polymer micelle laden hydrogels were obtained by radical polymerization in situ. The transparency of polymer micelle laden hydrogel declined with PAA/PEG concentration increasing. The equilibrium water content and water loss showed that polymer micelle laden hydrogel with higher PAA/PEG concentration was in a higher swollen state. The dynamic viscoelastic properties howed that all polymer micelle laden hydrogels had some characteristics of crosslinked elastomers. The surface structure of freeze dried composite hydrogels was different from freeze dried pure hydrogel. The drug loading and releasing behaviors were detected to evaluate the drug loading and releasing capacity of hydrogels using orfloxacin and puerarin as model drugs. The results indicated the polymer micelle in hydrogel could hold or help to hold some ophthalmic drugs, and slow down orfloxacin release speed or keep puerarin stably stay for a time in hydrogels. In the end, it was found that the transparency of composite hydrogel became better after the hydrogel had been immersed in PBS for several weeks.

  20. Enhancement of Curcumin Bioavailability Using Nanocellulose Reinforced Chitosan Hydrogel

    Directory of Open Access Journals (Sweden)

    Thennakoon M. Sampath Udeni Gunathilake

    2017-02-01

    Full Text Available A unique biodegradable, superporous, swellable and pH sensitive nanocellulose reinforced chitosan hydrogel with dynamic mechanical properties was prepared for oral administration of curcumin. Curcumin, a less water-soluble drug was used due to the fact that the fast swellable, superporous hydrogel could release a water-insoluble drug to a great extent. CO2 gas foaming was used to fabricate hydrogel as it eradicates using organic solvents. Field emission scanning electron microscope images revealed that the pore size significantly increased with the formation of widely interconnected porous structure in gas foamed hydrogels. The maximum compression of pure chitosan hydrogel was 25.9 ± 1 kPa and it increased to 38.4 ± 1 kPa with the introduction of 0.5% cellulose nanocrystals. In vitro degradation of hydrogels was found dependent on the swelling ratio and the amount of CNC of the hydrogel. All the hydrogels showed maximum swelling ratios greater than 300%. The 0.5% CNC-chitosan hydrogel showed the highest swelling ratio of 438% ± 11%. FTIR spectrum indicated that there is no interaction between drug and ingredients present in hydrogels. The drug release occurred in non-Fickian (anomalous manner in simulated gastric medium. The drug release profiles of hydrogels are consistent with the data obtained from the swelling studies. After gas foaming of the hydrogel, the drug loading efficiency increased from 41% ± 2.4% to 50% ± 2.0% and release increased from 0.74 to 1.06 mg/L. The drug release data showed good fitting to Ritger-Peppas model. Moreover, the results revealed that the drug maintained its chemical activity after in vitro release. According to the results of this study, CNC reinforced chitosan hydrogel can be suggested to improve the bioavailability of curcumin for the absorption from stomach and upper intestinal tract.

  1. Polyacrylamide Hydrogel Properties for Horticultural Applications

    Science.gov (United States)

    Polyacrylamide (PAAm) hydrogels are commonly employed to ensure hydration of the growth media and minimize crop losses during the crop production and postproduction phases in horticulture. However, studies of the effect of these materials have shown that they have a minimal effect on crop life and q...

  2. Polymer hydrogels as optimized delivery systems

    Energy Technology Data Exchange (ETDEWEB)

    Batista, Jorge G.S.; Varca, Gustavo H.C.; Ferraz, Caroline C.; Garrido, Gabriela P.; Diniz, Bruna M.; Carvalho, Vinicius S.; Lugao, Ademar B., E-mail: jorgegabriel@usp.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2013-07-01

    Hydrogels are formed by polymers capable of absorbing large quantities of water. They consist of one or more three-dimensionally structured polymer networks formed by macromolecular chains linked by covalent bonds-crosslinks - and physical interactions. The application of hydrogels, has been widely studied. Biodegradable synthetic or natural polymers such as chitosan, starch and poly-lactic-co-glycolic acid, have properties that allow the development of biodegradable systems for drug and nutraceutics delivery. This study aimed to develop polymeric hydrogels based on polyvinyl alcohol, polyacrylamide and polyvinylpyrrolidone using ionizing radiation in order to develop hydrogels for improved loading and release of compounds. Polymer solutions were solubilized in water and poured into thermoformed packages. After sealing, the material was subjected to γ-irradiation at 25kGy. The samples were assayed by means of mechanical properties, gel fraction and swelling degree. Nanostructure characterization was performed using Flory's equation to determine crosslinking density. The systems developed showed swelling degree and adequate mechanical resistance. The nanostructure evaluation showed different results for each system demonstrating the need of choosing the polymer based on the specific properties of each material. (author)

  3. Transparent hydrogel with enhanced water retention capacity by introducing highly hydratable salt

    Energy Technology Data Exchange (ETDEWEB)

    Bai, Yuanyuan; Xiang, Feng; Wang, Hong, E-mail: hwang@mail.xjtu.edu.cn, E-mail: suo@seas.harvard.edu [Electronic Materials Research Laboratory, School of Electronics and Information Engineering, Xi' an Jiaotong University, Xi' an 710049 (China); Chen, Baohong; Zhou, Jinxiong [State Key Laboratory for Strength and Vibration of Mechanical Structures, International Center for Applied Mechanics and School of Aerospace, Xi' an Jiaotong University, Xi' an 710049 (China); Suo, Zhigang, E-mail: hwang@mail.xjtu.edu.cn, E-mail: suo@seas.harvard.edu [School of Engineering and Applied Sciences, Kavli Institute of Bionano Science and Technology, Harvard University, Cambridge, Massachusetts 02138 (United States)

    2014-10-13

    Polyacrylamide hydrogels containing salt as electrolyte have been used as highly stretchable transparent electrodes in flexible electronics, but those hydrogels are easy to dry out due to water evaporation. Targeted, we try to enhance water retention capacity of polyacrylamide hydrogel by introducing highly hydratable salts into the hydrogel. These hydrogels show enhanced water retention capacity in different level. Specially, polyacrylamide hydrogel containing high content of lithium chloride can retain over 70% of its initial water even in environment with relative humidity of only 10% RH. The excellent water retention capacities of these hydrogels will make more applications of hydrogels become possible.

  4. Modeling of Droplet Evaporation on Superhydrophobic Surfaces.

    Science.gov (United States)

    Fernandes, Heitor C M; Vainstein, Mendeli H; Brito, Carolina

    2015-07-14

    When a drop of water is placed on a rough surface, there are two possible extreme regimes of wetting: the one called Cassie-Baxter (CB) with air pockets trapped underneath the droplet and the one called the Wenzel (W) state characterized by the homogeneous wetting of the surface. A way to investigate the transition between these two states is by means of evaporation experiments, in which the droplet starts in a CB state and, as its volume decreases, penetrates the surface's grooves, reaching a W state. Here we present a theoretical model based on the global interfacial energies for CB and W states that allows us to predict the thermodynamic wetting state of the droplet for a given volume and surface texture. We first analyze the influence of the surface geometric parameters on the droplet's final wetting state with constant volume and show that it depends strongly on the surface texture. We then vary the volume of the droplet, keeping the geometric surface parameters fixed to mimic evaporation and show that the drop experiences a transition from the CB to the W state when its volume reduces, as observed in experiments. To investigate the dependency of the wetting state on the initial state of the droplet, we implement a cellular Potts model in three dimensions. Simulations show very good agreement with theory when the initial state is W, but it disagrees when the droplet is initialized in a CB state, in accordance with previous observations which show that the CB state is metastable in many cases. Both simulations and the theoretical model can be modified to study other types of surfaces.

  5. Vibration-Induced Droplet Atomization --- A Theoretical Investigation.

    Science.gov (United States)

    James, Ashley; Smith, Marc K.; Glezer, Ari

    1997-11-01

    The atomization of a liquid droplet placed on a vibrating membrane starts with the development of Faraday free surface waves. As the excitation amplitude increases, the waves grow in amplitude and ultimately begin to eject smaller secondary droplets from the wave crests. The rate of droplet ejection can be large enough to completely drain the primary droplet, an event we call bursting. The evolution of the droplet ejection process depends on a coupled system dynamic between the droplet and the membrane. When droplets are ejected the resonant frequency of the system increases. This changes the acceleration felt by the droplet and, in turn, the rate of droplet ejection. Depending on the excitation frequency and amplitude, various types of bursting or droplet ejection processes may occur. A simple, single degree-of-freedom model of this coupled system is presented. The model is used to illustrate the effect of the excitation frequency and amplitude and the initial droplet size on the acceleration of the membrane and the droplet ejection rate. The results of the model will be compared to our experimental data on droplet ejection. Additional work is directed towards an understanding of the mechanism behind the droplet ejection process.

  6. Swelling Behaviors of Polyaniline-Poly(Acrylic Acid) Hydrogels

    Institute of Scientific and Technical Information of China (English)

    ZHANG You-wei; ZHAO Jiong-xin; LI Xiao-feng; TAO Yong; WU Cheng-xun

    2005-01-01

    Using poly(acrylic acid) (PAA) aqueous solution, NaOH aqueous solution, aniline(An) and ammonim persulfate(APS), PAn-PAA hydrogels with a semi-interpenetrating structure connected by physical interlocks, chemical ion bonds and hydrogen bonds wcre prepared. The swelling properties of the hydrogels in solutions of different pH values(adjusted by adding NaOH or HCl) were studied. All the hydrogels prepared have similar swelling curves (the curves of equilibrium swelling ratio vs. pH value) and reach their maximum swelling at pH of 8 - 10. The maximum swelling ratio of the hydrogels is dependent on composition, including molecular weight of PAA, polymer content of the hydrogel,and molar ratios of AA to An, APS to An, and NaOH to AA.And the compositional dependence of the swelling capacity of PAn-PAA hydrogels was also studied.

  7. Antimicrobial Activity of Chitosan-Carbon Nanotube Hydrogels

    Directory of Open Access Journals (Sweden)

    Jayachandran Venkatesan

    2014-05-01

    Full Text Available In the present study, we have prepared chitosan-carbon nanotube (Chitosan-CNT hydrogels by the freeze-lyophilization method and examined their antimicrobial activity. Different concentrations of CNT were used in the preparation of Chitosan-CNT hydrogels. These differently concentrated CNT hydrogels were chemically characterized using Fourier Transform-Infrared Spectroscopy, Scanning Electron Microscopy and Optical microscopy. The porosity of the hydrogels were found to be >94%. Dispersion of chitosan was observed in the CNT matrix by normal photography and optical microscopy. The addition of CNT in the composite scaffold significantly reduced the water uptake ability. In order to evaluate antimicrobial activity, the serial dilution method was used towards Staphylococcus aureus, Escherichia coli and Candida tropicalis. The composite Chitosan-CNT hydrogel showed greater antimicrobial activity with increasing CNT concentration, suggesting that Chitosan-CNT hydrogel scaffold will be a promising biomaterial in biomedical applications.

  8. ADDITIVE-INDUCED ENHANCEMENT OF OPTICAL CLARITY OF POLYACRYLAMIDE HYDROGEL

    Institute of Scientific and Technical Information of China (English)

    Jeffery Franklin; Zhi Yuan Wang

    2003-01-01

    The aqueous polymerization of acrylamide and crosslinking with N,N-methylenebisacrylamide afforded hydrogels displaying high levels of light scattering (poor optical clarity). Enhancement of the optical clarity within a polyacrylamide (PAm) hydrogel was accomplished through the implementation of"refractive index matching", Water-soluble additives were utilised to better match the refractive index inhomogeneities throughout a given hydrogel. This resulted in lower light scattering within the system and hence improved clarity. Amino acids, sugars, polymers, and other water-soluble additives such as glycerol were investigated by this methodology. Most additives investigated displayed potential for effectively reducing the light scattering within a PAm hydrogel as a function of increased additive concentration. On increasing the refractive index of the water medium, the overall refractive index of a PAm hydrogel was also observed to increase. This provided a quantitative means of determining the effectiveness of a given additive for improving the optical clarity within a hydrogel.

  9. Comparison of Pectin Hydrogel Collection Methods in Microfluidic Device

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Chaeyeon; Park, Ki-Su; Kang, Sung-Min; Kim, Jongmin; Song, YoungShin; Lee, Chang-Soo [Chungnam National University, Daejeon (Korea, Republic of)

    2015-12-15

    This study investigated the effect of different collection methods on physical properties of pectin hydrogels in microfluidic synthetic approach. The pectin hydrogels were simply produced by the incorporation of calcium ions dissolved in continuous mineral oil. Then, different collection methods, pipetting, tubing, and settling, for harvesting pectin hydrogels were applied. The settling method showed most uniform and monodispersed hydrogels. In the case of settling, a coefficient of variation was 3.46 which was lower than pipetting method (18.60) and tubing method (14.76). Under the settling method, we could control the size of hydrogels, ranging from 30 μm to 180 μm, by simple manipulation of the viscosity of pectin and volumetric flow rate of dispersed and continuous phase. Finally, according to the characteristics of simple encapsulation of biological materials, we envision that the pectin hydrogels can be applied to drug delivery, food, and biocompatible materials.

  10. Versatile Molding Process for Tough Cellulose Hydrogel Materials.

    Science.gov (United States)

    Kimura, Mutsumi; Shinohara, Yoshie; Takizawa, Junko; Ren, Sixiao; Sagisaka, Kento; Lin, Yudeng; Hattori, Yoshiyuki; Hinestroza, Juan P

    2015-11-05

    Shape-persistent and tough cellulose hydrogels were fabricated by a stepwise solvent exchange from a homogeneous ionic liquid solution of cellulose exposure to methanol vapor. The cellulose hydrogels maintain their shapes under changing temperature, pH, and solvents. The micrometer-scale patterns on the mold were precisely transferred onto the surface of cellulose hydrogels. We also succeeded in the spinning of cellulose hydrogel fibers through a dry jet-wet spinning process. The mechanical property of regenerated cellulose fibers improved by the drawing of cellulose hydrogel fibers during the spinning process. This approach for the fabrication of tough cellulose hydrogels is a major advance in the fabrication of cellulose-based structures with defined shapes.

  11. Mechanical Behavior of Tough Hydrogels for Structural Applications

    Science.gov (United States)

    Illeperuma, Widusha Ruwangi Kaushalya

    Hydrogels are widely used in many commercial products including Jell-O, contact lenses, and superabsorbent diapers. In recent decades, hydrogels have been under intense development for biomedical applications, such as scaffolds in tissue engineering, carriers for drug delivery, and valves in microfluidic systems. But the scope is severely limited as conventional hydrogels are weak and brittle and are not very stretchable. This thesis investigates the approaches that enhance the mechanical properties of hydrogels and their structural applications. We discov¬ered a class of exceptionally stretchable and tough hydrogels made from poly-mers that form networks via ionic and covalent crosslinks. Although such a hydrogel contains ~90% water, it can be stretched beyond 20 times its initial length, and has a fracture energy of ~9000 J/m2. The combination of large stretchability, remarkable toughness, and recoverability of stiffness and toughness, along with easy synthesis makes this material much superior over existing hydrogels. Extreme stretchability and blunted crack tips of these hydrogels question the validity of traditional fracture testing methods. We re-examine a widely used pure shear test method to measure the fracture energy. With the experimental and simulation results, we conclude that the pure shear test method can be used to measure fracture energy of extremely stretchable materials. Even though polyacrylamide-alginate hydrogels have an extremely high toughness, it has a relatively low stiffness and strength. We improved the stiffness and strength by embedding fibers. Most hydrogels are brittle, allowing the fibers to cut through the hydrogel when the composite is loaded. But tough hydrogel composites do not fail by the fibers cutting the hydrogel; instead, it undergoes large deforming by fibers sliding through the matrix. Hydrogels were not considered as materials for structural applications. But with enhanced mechanical properties, they have opened up

  12. Stimuli-responsive hydrogels in drug delivery and tissue engineering.

    Science.gov (United States)

    Sood, Nikhil; Bhardwaj, Ankur; Mehta, Shuchi; Mehta, Abhinav

    2016-01-01

    Hydrogels are the three-dimensional network structures obtained from a class of synthetic or natural polymers which can absorb and retain a significant amount of water. Hydrogels are one of the most studied classes of polymer-based controlled drug release. These have attracted considerable attention in biochemical and biomedical fields because of their characteristics, such as swelling in aqueous medium, biocompatibility, pH and temperature sensitivity or sensitivity towards other stimuli, which can be utilized for their controlled zero-order release. The hydrogels are expected to explore new generation of self-regulated delivery system having a wide array of desirable properties. This review highlights the exciting opportunities and challenges in the area of hydrogels. Here, we review different literatures on stimuli-sensitive hydrogels, such as role of temperature, electric potential, pH and ionic strength to control the release of drug from hydrogels.

  13. Dielectric properties of Rhodamine-B and metal doped hydrogels

    Energy Technology Data Exchange (ETDEWEB)

    Okutan, M. [Department of Physics, Yıldız Technical University, 34210 Istanbul (Turkey); Coşkun, R. [Department of Chemistry, Bozok University, 66100 Yozgat (Turkey); Öztürk, M. [Institute of Science, Niğde University, 51240 Niğde (Turkey); Yalçın, O., E-mail: o.yalcin@nigde.edu.tr [Department of Physics, Niğde University, 51240 Niğde (Turkey)

    2015-01-15

    The electric and dielectric properties of Rhodamine-B (RB) and metal ions (Ag{sup +}, Co{sup 2+}, Cr{sup 3+}, Mn{sup 2+} and Ni{sup 2+}) doped hydrogels have been analyzed in an extended frequency range by impedance spectroscopy. The RB doped hydrogels has been found to be sensitive to ionic conduction and electrode polarization according to the metal doped hydrogels. We have shown that the ionic conductive of RB doped hydrogels is originated from the free ions motion within the doped hydrogels at high frequency. We have also taken into account the Cl{sup −} and N{sup +} ions in the structure of RB provide additional ionic contribution to RB doped hydrogels.

  14. Thermocapillary migration of an isolated droplet and interaction of two droplets in zero gravity

    Science.gov (United States)

    Alhendal, Yousuf; Turan, Ali; Kalendar, Abdulrahim

    2016-09-01

    Fluid transfer within a stagnant liquid presents a significant challenge in zero-gravity conditions due to the lack of buoyancy effects. This challenge can be overcome by the utilisation of the Marangoni effect, or more specifically thermocapillary migration. The thermocapillary migration of droplets is driven by temperature gradients within the multiphase system which bring about a surface tension gradient driving the flow from the cold to the hot region. The migration speed of the droplet is significantly impacted by the heat transfer both inside the droplet and in its surroundings. This paper presents the analysis of drop movement in a stagnant liquid using computational fluid dynamics (CFD). The commercial software package Ansys-Fluent v.13 [1] is used to solve the governing continuum conservation equations for two-phase flow using the Volume of Fluid (VOF) method to track the liquid/liquid interface in 2D domain. This approach has been shown to be a valuable tool for studying the phenomena of liquid-liquid interaction. A strong agreement has been found with experimental observations conducted in microgravity. The inherent velocity of drops has been found to decrease with increasing Marangoni number. This finding is in line with the previous space experiments of Xie et al. (2005) [2] and in contrast to the numerical results of Ma (1999) [3] using the same liquid for the droplet and the host liquid. Data obtained in the present numerical study has been used to derive an expression predicting the scaled droplet velocity as a function of Marangoni number. A numerical study of the interaction of two spherical droplets undergoing thermocapillary migration in microgravity is also presented. The temperature thrust from the leading droplet towards the trailing droplet was found to disturb its migration velocity, but the trailing droplet was found to have no influence on the migration of the leading droplet.

  15. Photochemical Patterning of Ionically Cross-Linked Hydrogels

    Directory of Open Access Journals (Sweden)

    Marion Bruchet

    2013-08-01

    Full Text Available Iron(III cross-linked alginate hydrogel incorporating sodium lactate undergoes photoinduced degradation, thus serving as a biocompatible positive photoresist suitable for photochemical patterning. Alternatively, surface etching of iron(III cross-linked hydrogel contacting lactic acid solution can be used for controlling the thickness of the photochemical pattering. Due to biocompatibility, both of these approaches appear potentially useful for advanced manipulation with cell cultures including growing cells on the surface or entrapping them within the hydrogel.

  16. Bouncing droplets on a billiard table

    CERN Document Server

    Shirokoff, David

    2012-01-01

    In a set of experiments, Couder et. al. demonstrate that an oscillating fluid bed may propagate a bouncing droplet through the guidance of the surface waves. We present a dynamical systems model, in the form of an iterative map, for a droplet on an oscillating bath. We examine the droplet bifurcation from bouncing to walking, and prescribe general requirements for the surface wave to support stable walking states. We show that in addition to walking, there is a region of large forcing that may support the chaotic bouncing of the droplet. Using the map, we then investigate the droplet trajectories for two different wave responses in a square (billiard ball) domain. We show that for waves which are quickly damped in space, the long time trajectories in a square domain are either non-periodic dense curves, or approach a quasiperiodic orbit. In contrast, for waves which extend over many wavelengths, at low forcing, trajectories tend to approach an array of circular attracting sets. As the forcing increases, the a...

  17. MODEL OF LASER INTERACTION WITH LIQUID DROPLET

    Directory of Open Access Journals (Sweden)

    K. N. Volkov,

    2016-09-01

    Full Text Available Subject of Research. A mathematical model of optical breakdown in the dielectric liquid droplets when exposed to pulsed laser radiation was developed. The process is considered in several stages: heating, evaporation of the particle, forming a steam halo, ionization of the steam halo. Numerical study was carried out on the basis of the mathematical model to determine the threshold characteristics of the laser pulse. Main Results.Distributions of pressure, density and temperature of the particle steam halo were obtained by means of a calculation. The temperature field around the liquid droplet was determined. It has been found that at high energies in the gas bubble, the conditions are provided for thermal gas ionization and start of the electron avalanche, leading to plasma formation. Due to the volumetric heat generation, the droplet is overheated and is in a metastable state. The plasma cloud is almost opaque to radiation that causes an abrupt increase of temperature. As a result, an explosion occurs inside the droplet with the formation of a shock wave that is propagating outward. Practical Relevance.The results can be used to assess the performance of high-power laser scanning (LIDAR under the presence of liquid droplets in the atmosphere and other suspensions. Lasers can be used in fire and explosion aerospace systems. Obtained findings can be applied also in the systems of laser ignition and detonation initiation.

  18. Simulation of sliding of liquid droplets

    Science.gov (United States)

    Alen, Saif Khan; Farhat, Nazia; Rahman, Md. Ashiqur

    2016-07-01

    Numerical simulations of sliding behavior of liquid droplets on flat and periodic microgrooved surfaces with a range of groove geometry are conducted. A numerical model is developed which is capable of predicting the critical sliding angle of the drop by comparing the advancing and the receding angles obtained from numerical and experimental findings. The effect of microgroove topography, droplet size and inclination angle on the droplet sliding characteristics is analysed. Using an open-source platform (Surface Evolver), a 3D drop-shape model is developed to numerically determine the drop stability and contact angle hysteresis on tilted surfaces. In this numerical model, the three phase contact line of the drop is obtained by numerically calculating the vertex force and local contact angle at each vertex of the base contour. Several numerical models are developed based on various assumptions of base contour shape (circular or elliptical) and implementation of gravitational force to the droplet. Droplet shapes and critical sliding angles, obtained from these numerical models, are compared with those of experimental results and are found to be in very good agreement.

  19. Droplet impact on soft viscoelastic surfaces

    Science.gov (United States)

    Chen, Longquan; Bonaccurso, Elmar; Deng, Peigang; Zhang, Haibo

    2016-12-01

    In this work, we experimentally investigate the impact of water droplets onto soft viscoelastic surfaces with a wide range of impact velocities. Several impact phenomena, which depend on the dynamic interaction between the droplets and viscoelastic surfaces, have been identified and analyzed. At low We , complete rebound is observed when the impact velocity is between a lower and an upper threshold, beyond which droplets are deposited on the surface after impact. At intermediate We , entrapment of an air bubble inside the impinging droplets is found on soft surfaces, while a bubble entrapment on the surface is observed on rigid surfaces. At high We , partial rebound is only identified on the most rigid surface at We ≳92 . Rebounding droplets behave similarly to elastic drops rebounding on superhydrophobic surfaces and the impact process is independent of surface viscoelasticity. Further, surface viscoelasticity does not influence drop spreading after impact—as the surfaces behave like rigid surfaces—but it does affect drop recoiling. Also, the postimpact drop oscillation on soft viscoelastic surfaces is influenced by dynamic wettability of these surfaces. Comparing sessile drop oscillation with a damped harmonic oscillator allows us to conclude that surface viscoelasticity affects the damping coefficient and liquid surface tension sets the spring constant of the system.

  20. Structural Transitions in Cholesteric Liquid Crystal Droplets

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Ye; Bukusoglu, Emre; Martinez-Gonzalez, Jose A.; Rahimi, Mohammad; Roberts, Tyler F.; Zhang, Rui; Wang, Xiaoguang; Abbott, Nicholas L.; de Pablo, Juan J.

    2016-07-01

    Confinement of cholesteric liquid crystals (ChLC) into droplets leads to a delicate interplay between elasticity, chirality, and surface energy. In this work, we rely on a combination of theory and experiments to understand the rich morphological behavior that arises from that balance. More specifically, a systematic study of micrometer-sized ChLC droplets is presented as a function of chirality and surface energy (or anchoring). With increasing chirality, a continuous transition is observed from a twisted bipolar structure to a radial spherical structure, all within a narrow range of chirality. During such a transition, a bent structure is predicted by simulations and confirmed by experimental observations. Simulations are also able to capture the dynamics of the quenching process observed in experiments. Consistent with published work, it is found that nanoparticles are attracted to defect regions on the surface of the droplets. For weak anchoring conditions at the nanoparticle surface, ChLC droplets adopt a morphology similar to that of the equilibrium helical phase observed for ChLCs in the bulk. As the anchoring strength increases, a planar bipolar structure arises, followed by a morphological transition to a bent structure. The influence of chirality and surface interactions are discussed in the context of the potential use of ChLC droplets as stimuli-responsive materials for reporting molecular adsorbates.

  1. Bead mediated separation of microparticles in droplets

    Science.gov (United States)

    Sung, Ki-Joo; Lin, Xiaoxia Nina; Burns, Mark A.

    2017-01-01

    Exchange of components such as particles and cells in droplets is important and highly desired in droplet microfluidic assays, and many current technologies use electrical or magnetic fields to accomplish this process. Bead-based microfluidic techniques offer an alternative approach that uses the bead’s solid surface to immobilize targets like particles or biological material. In this paper, we demonstrate a bead-based technique for exchanging droplet content by separating fluorescent microparticles in a microfluidic device. The device uses posts to filter surface-functionalized beads from a droplet and re-capture the filtered beads in a new droplet. With post spacing of 7 μm, beads above 10 μm had 100% capture efficiency. We demonstrate the efficacy of this system using targeted particles that bind onto the functionalized beads and are, therefore, transferred from one solution to another in the device. Binding capacity tests performed in the bulk phase showed an average binding capacity of 5 particles to each bead. The microfluidic device successfully separated the targeted particles from the non-targeted particles with up to 98% purity and 100% yield. PMID:28282412

  2. Droplet breakup dynamics of weakly viscoelastic fluids

    Science.gov (United States)

    Marshall, Kristin; Walker, Travis

    2016-11-01

    The addition of macromolecules to solvent, even in dilute quantities, can alter a fluid's response in an extensional flow. For low-viscosity fluids, the presence of elasticity may not be apparent when measured using a standard rotational rheometer, yet it may still alter the response of a fluid when undergoing an extensional deformation, especially at small length scales where elastic effects are enhanced. Applications such as microfluidics necessitate investigating the dynamics of fluids with elastic properties that are not pronounced at large length scales. In the present work, a microfluidic cross-slot configuration is used to study the effects of elasticity on droplet breakup. Droplet breakup and the subsequent iterated-stretching - where beads form along a filament connecting two primary droplets - were observed for a variety of material and flow conditions. We present a relationship on the modes of bead formation and how and when these modes will form based on key parameters such as the properties of the outer continuous-phase fluid. The results are vital not only for simulating the droplet breakup of weakly viscoelastic fluids but also for understanding how the droplet breakup event can be used for characterizing the extensional properties of weakly-viscoelastic fluids.

  3. Bioeffects due to acoustic droplet vaporization

    Science.gov (United States)

    Bull, Joseph

    2015-11-01

    Encapsulated micro- and nano-droplets can be vaporized via ultrasound, a process termed acoustic droplet vaporization. Our interest is primarily motivated by a developmental gas embolotherapy technique for cancer treatment. In this methodology, infarction of tumors is induced by selectively formed vascular gas bubbles that arise from the acoustic vaporization of vascular microdroplets. Additionally, the microdroplets may be used as vehicles for localized drug delivery, with or without flow occlusion. In this talk, we examine the dynamics of acoustic droplet vaporization through experiments and theoretical/computational fluid mechanics models, and investigate the bioeffects of acoustic droplet vaporization on endothelial cells and in vivo. Early timescale vaporization events, including phase change, are directly visualized using ultra-high speed imaging, and the influence of acoustic parameters on droplet/bubble dynamics is discussed. Acoustic and fluid mechanics parameters affecting the severity of endothelial cell bioeffects are explored. These findings suggest parameter spaces for which bioeffects may be reduced or enhanced, depending on the objective of the therapy. This work was supported by NIH grant R01EB006476.

  4. SPH Modeling of Droplet Impact on Solid Boundary

    Institute of Scientific and Technical Information of China (English)

    李大鸣; 白玲; 李玲玲; 赵明宇

    2014-01-01

    A droplet undergoes spreading, rebounding or splashing when it impacts solid boundary, which is a typical phenomenon of free surface flow that exists widely in modern industry. Smoothed particle hydrodynamics (SPH) method is applied to numerically study the dynamical behaviors of the droplet impacting solid boundary, and both the spreading and rebounding phenomena of the droplet are reproduced in the simulation. The droplet deformation, flow fields and pressure fields inside the droplet at different moments are analyzed. Two important factors, the initial veloc-ity and diameter, are discussed in determining the maximum spreading factor, revealing that the maximum spreading factor increases with the increase of the impact velocity and droplet diameter respectively.

  5. Possible transmission experiments with low-velocity helium droplets

    Science.gov (United States)

    Wynveen, A.; Lidke, K. A.; Lutsyshyn, Y.; Halley, J. W.

    2007-02-01

    We show that very low velocity droplets can be used to carry out an experiment to test whether condensate mediated transmission processes can occur in a superfluid droplet of He4 . By appropriately choosing the droplet radius and temperature, we can eliminate the competing roton, phonon, and ripplon mediated elastic transmission events. Then a calculation shows that if a few percent or more of the incident atoms experience anomalous condensate mediated transmission, the effects should be detectable in the droplet trajectories. We consider two forms of the experiment, involving a freely falling droplet in ambient vapor in the first instance and an oscillating droplet in a magnetic trap in the second.

  6. Dynamics of Coalescence-Induced Jumping Water Droplets

    CERN Document Server

    Miljkovic, Nenad; Enright, Ryan; Wang, Evelyn N

    2013-01-01

    This fluid dynamics video shows the different interaction mechanisms of coalescence-induced droplet jumping during condensation on a nanostructured superhydrophobic surface. High speed imaging was used to show jumping behavior on superhydrophobic copper oxide and carbon nanotube surfaces. Videos demonstrating multi-jumping droplets, jumping droplet return to the surface, and droplet-droplet electrostatic repulsions were analyzed. Experiments using external electric fields in conjunction with high speed imaging in a custom built experimental chamber were used to show that all coalescence-induced jumping droplets on superhydrophobic surfaces become positively charged upon leaving the surface, which is detailed in the video.

  7. Injectable Biopolymer-hydroxyapatite Hydrogels: Obtaining and their Characterization

    Directory of Open Access Journals (Sweden)

    L.B. Sukhodub

    2016-03-01

    Full Text Available Hydrogels based on hydroxyapatite (HA and Chitosan (CS with addition of sodium alginate (Alg were synthesized by in situ precipitation method. Structure, morphology, chemical and phase composition of the HA/CS and HA/CS/Alg hydrogels were characterized by TEM, FTIR and XRD. Hydrogels consist of low crystallinity calcium deficient hydroxyapatite (JCPDS 9 432, the needle-like crystallites have an average size 25 nm. The introduction of Alginate powder into HA/CS hydrogel solution demonstrate the viscosity enhancing of the HA/CS hydrogel due to polyelectrolyte reaction between Alginate and Chitosan macromolecules. Two natural polymers and partially released from hydroxyapatite Ca2+ ions formed a matrix by crosslinking the polymer macromolecules through hydroxyl, amino and carbonyl groups. These processes promote the formation of a more stable structure of HA/CS/Alg hydrogel as compared to HA/CS. The structural integrity and degradation tests have demonstrated that HA/CS/Alg1.0 saved its initial shape in 7 days of shaking in SBF solution, meanwhile for HA/CS, a structural decay was observed. The HA/CS hydrogel had completely lost its volume support after 1 day shaking in SBF. Thus, the ability of HA/CS hydrogel to maintain its shape with implantation into bone tissue defect may be enhanced with alginate addition, but alginate content more than 1 w/w % reduces the hydrogel plasticity, increases the swelling and accelerates the shape decay.

  8. Tumor Growth Suppression Induced by Biomimetic Silk Fibroin Hydrogels

    Science.gov (United States)

    Yan, Le-Ping; Silva-Correia, Joana; Ribeiro, Viviana P.; Miranda-Gonçalves, Vera; Correia, Cristina; da Silva Morais, Alain; Sousa, Rui A.; Reis, Rui M.; Oliveira, Ana L.; Oliveira, Joaquim M.; Reis, Rui L.

    2016-08-01

    Protein-based hydrogels with distinct conformations which enable encapsulation or differentiation of cells are of great interest in 3D cancer research models. Conformational changes may cause macroscopic shifts in the hydrogels, allowing for its use as biosensors and drug carriers. In depth knowledge on how 3D conformational changes in proteins may affect cell fate and tumor formation is required. Thus, this study reports an enzymatically crosslinked silk fibroin (SF) hydrogel system that can undergo intrinsic conformation changes from random coil to β-sheet conformation. In random coil status, the SF hydrogels are transparent, elastic, and present ionic strength and pH stimuli-responses. The random coil hydrogels become β-sheet conformation after 10 days in vitro incubation and 14 days in vivo subcutaneous implantation in rat. When encapsulated with ATDC-5 cells, the random coil SF hydrogel promotes cell survival up to 7 days, whereas the subsequent β-sheet transition induces cell apoptosis in vitro. HeLa cells are further incorporated in SF hydrogels and the constructs are investigated in vitro and in an in vivo chick chorioallantoic membrane model for tumor formation. In vivo, Angiogenesis and tumor formation are suppressed in SF hydrogels. Therefore, these hydrogels provide new insights for cancer research and uses of biomaterials.

  9. Thermo-Responsive Hydrogels for Stimuli-Responsive Membranes

    Directory of Open Access Journals (Sweden)

    Evan Mah

    2013-09-01

    Full Text Available Composite membranes with stimuli-responsive properties can be made by coating a thermo-responsive hydrogel onto a micro- or macroporous support. These hydrogels undergo a temperature induced volume-phase transition, which contributes towards the composite membrane’s stimuli-responsive properties. This paper reviews research done on complimentary forms of temperature responsive “thermophilic” hydrogels, those exhibiting positive volume-phase transitions in aqueous solvent. The influences of intermolecular forces on the mechanism of phase-transition are discussed along with case examples of typical thermophilic hydrogels.

  10. PVA/atapulgite hydrogels; Hidrogeis de PVA/atapulgita

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, R.N.; Soares, G.A., E-mail: nunes@metalmat.ufrj.b [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil); Paranhos, C.M. [Universidade Federal de Sao Carlos (UFSCAR), SP (Brazil); Barreto, L.S. [Universidade Federal de Sergipe (UFS), Aracaju, SE (Brazil)

    2010-07-01

    PVA hydrogels can be used as wound-healing as a consequence of their biocompatibility, flexibility, etc. In order to improve mechanical resistance of wound-healing, polymeric hydrogels reinforced with clay have been studied. Among national clays, attapulgite stands out. Once it is a natural material, acid treatment can be required in order to remove impurities. In the present work, PVA hydrogels reinforced with attapulgite were produced and they were characterized by swelling behavior, XRD, DSC and traction test. Among all properties studied, hydrogels reinforced with activated attapulgite showed better mechanical resistance and Young module than the other samples. (author)

  11. Physically crosslinked-sacran hydrogel films for wound dressing application.

    Science.gov (United States)

    Wathoni, Nasrul; Motoyama, Keiichi; Higashi, Taishi; Okajima, Maiko; Kaneko, Tatsuo; Arima, Hidetoshi

    2016-08-01

    The thin hydrogel films consisting of water-swollen polymer networks can potentially be applied for biomedical fields. Recently, natural polysaccharides have great attentions to be developed as wound healing and protection. In the present study, we newly prepared and characterized a physically crosslinked-hydrogel film composed of a novel megamolecular polysaccharide sacran for wound dressing application. We successfully fabricated a physically crosslinked-sacran hydrogel film by a solvent-casting method. The thickness of a sacran hydrogel film was lower than that of a sodium alginate (Na-alginate) film. Importantly, the swollen ratio of a sacran hydrogel film in water at 24h was 19-fold, compared to initial weight. Meanwhile, a Na-alginate hydrogel film was completely broken apart after rehydration. Moreover, a sacran hydrogel film did not show any cytotoxicity on NIH3T3 cells, a murine fibroblast cell line. The in vivo skin hydration study revealed that a sacran hydrogel film significantly increased the moisture content on hairless mice skin and considerably improved wound healing ability, compared to control (non-treated), probably due to not only the moisturing effect but also the anti-inflammatory effect of sacran. These results suggest that sacran has the potential properties as a basic biomaterial in a hydrogel film for wound dressing application.

  12. Bragg grating chemical sensor with hydrogel as sensitive element

    Institute of Scientific and Technical Information of China (English)

    Xiaomei Liu(刘小梅); Shilie Zheng(郑史烈); Xianmin Zhang(章献民); Jun Cong(丛军); Kangsheng Chen(陈抗生); Jian Xu(徐坚)

    2004-01-01

    A novel fiber Bragg grating (FBG) based chemical sensor using hydrogel, a swellable polymer, as sensitive element is demonstrated. The sensing mechanism relies on the shift of Bragg wavelength due to the stress resulted from volume change of sensitive swellable hydrogel responding to the change of external environment. A polyacrylamide hydrogel fiber grating chemical sensor is made, and the experiments on its sensitivity to the salinity are performed. The sensitivity is low due to the less stress from the shrinking or swelling of hydrogels. Reducing the cross diameter of the grating through etching with hydrofluoric acid can greatly improve the sensitivity of the sensor.

  13. Biodegradable HEMA-based hydrogels with enhanced mechanical properties.

    Science.gov (United States)

    Moghadam, Mohamadreza Nassajian; Pioletti, Dominique P

    2016-08-01

    Hydrogels are widely used in the biomedical field. Their main purposes are either to deliver biological active agents or to temporarily fill a defect until they degrade and are followed by new host tissue formation. However, for this latter application, biodegradable hydrogels are usually not capable to sustain any significant load. The development of biodegradable hydrogels presenting load-bearing capabilities would open new possibilities to utilize this class of material in the biomedical field. In this work, an original formulation of biodegradable photo-crosslinked hydrogels based on hydroxyethyl methacrylate (HEMA) is presented. The hydrogels consist of short-length poly(2-hydroxyethyl methacrylate) (PHEMA) chains in a star shape structure, obtained by introducing a tetra-functional chain transfer agent in the backbone of the hydrogels. They are cross-linked with a biodegradable N,O-dimethacryloyl hydroxylamine (DMHA) molecule sensitive to hydrolytic cleavage. We characterized the degradation properties of these hydrogels submitted to mechanical loadings. We showed that the developed hydrogels undergo long-term degradation and specially meet the two essential requirements of a biodegradable hydrogel suitable for load bearing applications: enhanced mechanical properties and low molecular weight degradation products. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 1161-1169, 2016.

  14. Force-compensated hydrogel-based pH sensor

    Science.gov (United States)

    Deng, Kangfa; Gerlach, Gerald; Guenther, Margarita

    2015-04-01

    This paper presents the design, simulation, assembly and testing of a force-compensated hydrogel-based pH sensor. In the conventional deflection method, a piezoresistive pressure sensor is used as a chemical-mechanical-electronic transducer to measure the volume change of a pH-sensitive hydrogel. In this compensation method, the pH-sensitive hydrogel keeps its volume constant during the whole measuring process, independent of applied pH value. In order to maintain a balanced state, an additional thermal actuator is integrated into the close-loop sensor system with higher precision and faster dynamic response. Poly (N-isopropylacrylamide) (PNIPAAm) with 5 mol% monomer 3-acrylamido propionic acid (AAmPA) is used as the temperature-sensitive hydrogel, while poly (vinyl alcohol) with poly (acrylic acid) (PAA) serves as the pH-sensitive hydrogel. A thermal simulation is introduced to assess the temperature distribution of the whole microsystem, especially the temperature influence on both hydrogels. Following tests are detailed to verify the working functions of a sensor based on pH-sensitive hydrogel and an actuator based on temperature-sensitive hydrogel. A miniaturized prototype is assembled and investigated in deionized water: the response time amounts to about 25 min, just half of that one of a sensor based on the conventional deflection method. The results confirm the applicability of t he compensation method to the hydrogel-based sensors.

  15. Responsive Hydrogels for Label-Free Signal Transduction within Biosensors

    Directory of Open Access Journals (Sweden)

    Kamila Gawel

    2010-04-01

    Full Text Available Hydrogels have found wide application in biosensors due to their versatile nature. This family of materials is applied in biosensing either to increase the loading capacity compared to two-dimensional surfaces, or to support biospecific hydrogel swelling occurring subsequent to specific recognition of an analyte. This review focuses on various principles underpinning the design of biospecific hydrogels acting through various molecular mechanisms in transducing the recognition event of label-free analytes. Towards this end, we describe several promising hydrogel systems that when combined with the appropriate readout platform and quantitative approach could lead to future real-life applications.

  16. PVA-Sago starch hydrogel and the preliminary clinical animal study of the hydrogel

    Energy Technology Data Exchange (ETDEWEB)

    Hashim, Kamaruddin; Mohd Dahlan, Khairul Zaman [Malaysian Institute for Nuclear Technology Research, Bangi, Kajang (Malaysia); Halim, Ahmad Sukari; Md Nor, Mohd Tarmizi [Sciences University of Malaysia, School of Medical Sciences, Kerian, Kelantan (Malaysia); Yoshii, Fumio [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment

    2002-03-01

    Sago starch granule dissolves in hot water to form physically crosslink semi-gel structure. Polyvinyl alcohol (PVA) in aqueous solution is chemically crosslink and form hydrogel after expose to gamma or electron beam irradiation. Combination of sago starch and PVA give tremendous improvement on strength and elasticity of the gel. Adding additive such as carboxymethyl cellulose enhance the swelling or absorption property of the gel. These properties of hydrogel are important for wound dressing application. The preliminary clinical animal study on the PVA Sago hydrogel dressing shows promising results of healing process in comparison with the conventional dressing using vaseline impregnated gauze acting as control dressing. This re-confirmed by biopsy tests on the wound tissue taking during the healing process. The tests show the increasing amount of fibroblast and endothelial cells on both wounds using hydrogel and jalonet during the healing process. Also, the rate of epitheliazation is almost completed for both wounds after 10 days of dressing and the lymphocytes cell increase tremendously for the first 14 days with hydrogel dressing. (author)

  17. Droplet sizes, dynamics and deposition in vertical annular flow

    Energy Technology Data Exchange (ETDEWEB)

    Lopes, J C.B.; Dukler, A E

    1985-10-01

    The role of droplets in vertical upwards annular flow is investigated, focusing on the droplet size distributions, dynamics, and deposition phenomena. An experimental program was performed based on a new laser optical technique developed in these laboratories and implemented here for annular flow. This permitted the simultaneous measurement of droplet size, axial and radial velocity. The dependence of droplet size distributions on flow conditions is analyzed. The Upper-Log Normal function proves to be a good model for the size distribution. The mechanism controlling the maximum stable drop size was found to result from the interaction of the pressure fluctuations of the turbulent flow of the gas core with the droplet. The average axial droplet velocity showed a weak dependence on gas rates. This can be explained once the droplet size distribution and droplet size-velocity relationship are analyzed simultaneously. The surprising result from the droplet conditional analysis is that larger droplet travel faster than smaller ones. This dependence cannot be explained if the drag curves used do not take into account the high levels of turbulence present in the gas core in annular flow. If these are considered, then interesting new situations of multiplicity and stability of droplet terminal velocities are encountered. Also, the observed size-velocity relationship can be explained. A droplet deposition is formulated based on the particle inertia control. This permitted the calculation of rates of drop deposition directly from the droplet size and velocities data.

  18. Lattice-Boltzmann simulations of droplet evaporation

    KAUST Repository

    Ledesma-Aguilar, Rodrigo

    2014-09-04

    © the Partner Organisations 2014. We study the utility and validity of lattice-Boltzmann (LB) simulations to explore droplet evaporation driven by a concentration gradient. Using a binary-fluid lattice-Boltzmann algorithm based on Cahn-Hilliard dynamics, we study the evaporation of planar films and 3D sessile droplets from smooth solid surfaces. Our results show that LB simulations accurately reproduce the classical regime of quasi-static dynamics. Beyond this limit, we show that the algorithm can be used to explore regimes where the evaporative and diffusive timescales are not widely separated, and to include the effect of boundaries of prescribed driving concentration. We illustrate the method by considering the evaporation of a droplet from a solid surface that is chemically patterned with hydrophilic and hydrophobic stripes. This journal is

  19. Droplet Manipulations in Two Phase Flow Microfluidics

    Directory of Open Access Journals (Sweden)

    Arjen M. Pit

    2015-11-01

    Full Text Available Even though droplet microfluidics has been developed since the early 1980s, the number of applications that have resulted in commercial products is still relatively small. This is partly due to an ongoing maturation and integration of existing methods, but possibly also because of the emergence of new techniques, whose potential has not been fully realized. This review summarizes the currently existing techniques for manipulating droplets in two-phase flow microfluidics. Specifically, very recent developments like the use of acoustic waves, magnetic fields, surface energy wells, and electrostatic traps and rails are discussed. The physical principles are explained, and (potential advantages and drawbacks of different methods in the sense of versatility, flexibility, tunability and durability are discussed, where possible, per technique and per droplet operation: generation, transport, sorting, coalescence and splitting.

  20. Effect of water droplet in solvent sublation

    Institute of Scientific and Technical Information of China (English)

    Peng Yu Bi; Hui Ru Dong; Nan Nan Wang

    2008-01-01

    Aqueous phase layer around bubble and water droplet are two additional processes in solvent sublation. In the dynamic processof mass transfer, they are always neglected, but they are very important in the investigation of thermodynamic equilibrium. In thispaper, the effect of water droplet in solvent sublation was discussed in detail, and the previous mathematical model of solventsubaltion was improved. Matlab 6.5 was used to simulate the process of water droplets, and the comparison between the previoushypothesis and the improvement in this paper showed the superiority, especially in the investigation of thermodynamic equilibrium.Moreover, the separation and concentration of the complex compound dithizone-Co(Ⅱ) from aqueous phase to n-octanol by solventsublation also proved the improved mathematical model was reasonable.2008 Hui Ru Dong. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.

  1. The dynamics of laser droplet generation

    CERN Document Server

    Krese, Blaz; Govekar, Edvard

    2010-01-01

    We propose an experimental setup allowing for the characterization of laser droplet generation in terms of the underlying dynamics, primarily showing that the latter is deterministically chaotic by means of nonlinear time series analysis methods. In particular, we use a laser pulse to melt the end of a properly fed vertically placed metal wire. Due to the interplay of surface tension, gravity force and light-metal interaction, undulating pendant droplets are formed at the molten end, which eventually completely detach from the wire as a consequence of their increasing mass. We capture the dynamics of this process by employing a high-speed infrared camera, thereby indirectly measuring the temperature of the wire end and the pendant droplets. The time series is subsequently generated as the mean value over the pixel intensity of every infrared snapshot. Finally, we employ methods of nonlinear time series analysis to reconstruct the phase space from the observed variable and test it against determinism and stati...

  2. Versatile microfluidic droplets array for bioanalysis.

    Science.gov (United States)

    Hu, Shan-Wen; Xu, Bi-Yi; Ye, Wei-Ke; Xia, Xing-Hua; Chen, Hong-Yuan; Xu, Jing-Juan

    2015-01-14

    We propose a novel method to obtain versatile droplets arrays on a regional hydrophilic chip that is fabricated by PDMS soft lithography and regional plasma treatment. It enables rapid liquid dispensation and droplets array formation just making the chip surface in contact with solution. By combining this chip with a special Christmas Tree structure, the droplets array with concentrations in gradient is generated. It possesses the greatly improved performance of convenience and versatility in bioscreening and biosensing. For example, high throughput condition screening of toxic tests of CdSe quantum dots on HL-60 cells are conducted and cell death rates are successfully counted quickly and efficiently. Furthermore, a rapid biosensing approach for cancer biomarkers carcinoma embryonic antigen (CEA) is developed via magnetic beads (MBs)-based sandwich immunoassay methods.

  3. Simulation of Interpersonal Transport of Expiratory Droplets and Droplet Nuclei between Two Standing Manikins

    DEFF Research Database (Denmark)

    Liu, Li; Y, Li,

    2012-01-01

    numerical breathing thermal manikins and a full-scale test room model. Displacement ventilation with a ventilation rate of 6 h-1 was used to introduce ventilation air into the room. Two manikins were set to breathing periodically and their breathing functions were identical and synchronized. The number...... of droplet nuclei inhaled by the susceptible manikin and the numbers of droplet nuclei deposited on the surfaces of the susceptible manikin, e.g. face, front, etc. were recorded at separation distances of 0.5, 1.0, 1.5 and 3.0 m. In our preliminary study, for one breath from the source person, 1,600 droplets...... with an initial diameter of 100 μm were released. All the droplets became droplet nuclei within 16 seconds. Three (3) and nine (9) droplet nuclei were inhaled by the susceptible person at a mutual distance of 0.5 and 1.0 m, respectively. No droplet nuclei were inhaled at 1.5 and 3.0 m. This result illustrates...

  4. Optical droplet vaporization of micron-sized perfluorocarbon droplets and their photoacoustic detection

    Science.gov (United States)

    Strohm, Eric; Rui, Min; Gorelikov, Ivan; Matsuura, Naomi; Kolios, Michael

    2011-03-01

    An acoustic and photoacoustic characterization of micron-sized perfluorocarbon (PFC) droplets is presented. PFC droplets are currently being investigated as acoustic and photoacoustic contrast agents and as cancer therapy agents. Pulse echo measurements at 375 MHz were used to determine the diameter, ranging from 3.2 to 6.5 μm, and the sound velocity, ranging from 311 to 406 m/s of nine droplets. An average sound velocity of 379 +/- 18 m/s was calculated for droplets larger than the ultrasound beam width of 4.0 μm. Optical droplet vaporization, where vaporization of a single droplet occurred upon laser irradiation of sufficient intensity, was verified using pulse echo acoustic methods. The ultrasonic backscatter amplitude, acoustic impedance and attenuation increased after vaporization, consistent with a phase change from a liquid to gas core. Photoacoustic measurements were used to compare the spectra of three droplets ranging in diameter from 3.0 to 6.2 μm to a theoretical model. Good agreement in the spectral features was observed over the bandwidth of the 375 MHz transducer.

  5. Burning of droplets and particles of explosives

    Energy Technology Data Exchange (ETDEWEB)

    Kondrikov, B.N. [Mendeleev University of Chemical Technology, Moscow (Russian Federation)

    1996-12-31

    Small droplets of organic diazides investigated by C.K. Law and coworkers burn in hot gas at 1 atm with rates inversely proportional to the droplet diameter presumably owing to leading chemical reaction proceeds in gas phase. These burning rates are obviously much lower than those obtained by extrapolation of the results measured for the some substances in glass tubes (at pressure of about 10{sup -2}-10{sup -1} atm, and temperature 0-100 deg C) on the burning conditions of the droplets. Kinetic constants estimated using Zel`dovich equation for the burning rate in gas phase and Semenov relation for delay time of the droplets micro-explosion in liquid phase are about the same: E {approx_equal} 0.17 MJ/mol, log{sub 10}k{sub o} {approx_equal} 15(S{sup -1}). In both of the cases the leading chemical reaction is supposed to be of the first order. Landau instability is assumed to be reflected in distortion of the droplets at burning but, as opposed to the liquids pools or columns burning, it is not followed by the burning rate augmentation or (as it is observed sometimes) by the combustion extinguishment. Simple dependence of burning rate of droplets of diazides of the row of normal alkanes on their enthalpy of formation is obtained. Burning rate of ball-shaped particles of polyvinyl-nitrate estimated by A. Merzhanov and collaborators is about the same as measured by the data E.I. Maximov, the member of the same team, for PVN strands, at extrapolation of his results on the suggested preheating temperature of the particle. Probably it is a result of the leading chemical reaction proceeding in condensed phase. (author) 10 refs.

  6. Vitrification and devitrification of micro-droplets

    Science.gov (United States)

    Ryoun Youn, Jae; Song, Young Seok

    2012-11-01

    Vitrification can be achieved by flash freezing and thawing (i.e. quenching) when ice crystal formation is inhibited in a cryogenic environment. Such ultra-rapid cooling and rewarming occurs due to the large temperature difference between the liquid and its surrounding medium. Here, we analyze the crystallization behavior of a droplet (i.e. vitrification and devitrification) by using a numerical model. The numerical results were found to explain the experimental observations successfully. The findings showed that for successful cryopreservation not only sufficiently fast cooling, but also rewarming processes should be designed and controlled to avoid devitrification of a droplet.

  7. Recent Advances in Applications of Droplet Microfluidics

    Directory of Open Access Journals (Sweden)

    Wei-Lung Chou

    2015-09-01

    Full Text Available Droplet-based microfluidics is a colloidal and interfacial system that has rapidly progressed in the past decade because of the advantages of low fabrication costs, small sample volumes, reduced analysis durations, high-throughput analysis with exceptional sensitivity, enhanced operational flexibility, and facile automation. This technology has emerged as a new tool for many recently used applications in molecular detection, imaging, drug delivery, diagnostics, cell biology and other fields. Herein, we review recent applications of droplet microfluidics proposed since 2013.

  8. Free running droplets on packed powder beds

    Science.gov (United States)

    Whitby, Catherine P.; Bian, Xun; Sedev, Rossen

    2013-06-01

    We observed that water drops placed on horizontal beds of fine molybdenite particles move freely over the bed surface for about 1 second. The drops collect an irregular coating of unevenly distributed particles as they bounce and roll. We manipulated the distance that the drops travel, and hence the area of the droplet surface coated with particles, by varying the water surface tension and the kinetic energy of the initial droplet impact on the bed surface. Our results highlight the role of contact angle hysteresis in particle encapsulation of liquid drops.

  9. Simulation of Droplet Trains in Microfluidic Networks

    CERN Document Server

    Behzad, Mehran Djalali; Ejtehadi, Mohammad Reza

    2009-01-01

    In this work we show that in a microfluidic network and in low Reynolds numbers a system can be irreversible because of hysteresis effects.The network, which is employed in our simulations, is taken from recent experiments. The network consists of one loop connected to input and output pipes. A train of droplets enter the system at a uniform rate, but they may leave it in different patterns, e.g. periodic or even chaotic. The out put pattern depends on the time interval among the incoming droplets as well as the network geometry and for some parameters the system is not reversible.

  10. Poly(N-vinylpyrrolidone) hydrogels. Pt. 2; Hydrogel composites as wound dressing for tropical environment

    Energy Technology Data Exchange (ETDEWEB)

    Hilmy, N.; Darwis, D.; Hardiningsih, L. (Center for the Application of Isotopes and Radiation, BATAN, Jakarta (Indonesia))

    The effects of irradiation on hydration and other properties of poly(vinylpyrrolidone) (PVP) hydrogel composites have been investigated. The aqueous solution of vinylpyrrolidone (VP) 10 wt % was mixed with several additives such as agar and polyethylene glycol (PEG). The solution was then irradiated with gamma rays from a Cobalt-60 source at room temperature. Several parameters such as elongation at break (EB), tensile strength (TS), degree of swelling (DS), water vapor transmission rate (WVTR), equilibrium water content (EWC), microbial growth and penetration tests, and water activity (Aw) were analysed at room temperature of 29 [+-] 2[sup o]C humidity of 80 [+-] 10%. Such hydrogel membranes exhibit the following properties: they are elastic, transparent, flexible, impermeable for bacteria. They absorb a high capacity of water, attach to healthy skin but not to the wound and they are easy to remove. These properties of the hydrogel membranes allow application as a wound dressing in a tropical environment. (author).

  11. Evaluating the capabilities and uncertainties of droplet measurements for the fog droplet spectrometer (FM-100

    Directory of Open Access Journals (Sweden)

    J. K. Spiegel

    2012-05-01

    Full Text Available Droplet size spectra measurements are crucial to obtain a quantitative microphysical description of clouds and fog. However, cloud droplet size measurements are subject to various uncertainties. This work focuses on the evaluation of two key measurement uncertainties arising during cloud droplet size measurements with a conventional droplet size spectrometer (FM-100: first, we addressed the precision with which droplets can be sized with the FM-100 on the basis of Mie theory. We deduced error assumptions and proposed how to correct measured size distributions for these errors by redistributing the measured droplet size distribution using a stochastic approach. Second, based on a literature study, we derived corrections for particle losses during sampling with the FM-100. We applied both corrections to cloud droplet size spectra measured at the high alpine site Jungfraujoch for a temperature range from 0 °C to 11 °C. We show that Mie scattering led to spikes in the droplet size distributions using the default sizing procedure, while the stochastic approach reproduced the ambient size distribution adequately. A detailed analysis of the FM-100 sampling efficiency revealed that particle losses were typically below 10% for droplet diameters up to 10 μm. For larger droplets, particle losses can increase up to 90% for the largest droplets of 50 μm at ambient windspeeds below 4.4 m s−1 and even to >90% for larger angles between the instrument orientation and the wind vector (sampling angle at higher wind speeds. Comparisons of the FM-100 to other reference instruments revealed that the total liquid water content (LWC measured by the FM-100 was more sensitive to particle losses than to re-sizing based on Mie scattering, while the total number concentration was only marginally influenced by particle losses. As a consequence, for further LWC measurements with the FM-100 we strongly recommend to consider (1 the error arising due to Mie

  12. Evaluating the capabilities and uncertainties of droplet measurements for the fog droplet spectrometer (FM-100

    Directory of Open Access Journals (Sweden)

    J. K. Spiegel

    2012-09-01

    Full Text Available Droplet size spectra measurements are crucial to obtain a quantitative microphysical description of clouds and fog. However, cloud droplet size measurements are subject to various uncertainties. This work focuses on the error analysis of two key measurement uncertainties arising during cloud droplet size measurements with a conventional droplet size spectrometer (FM-100: first, we addressed the precision with which droplets can be sized with the FM-100 on the basis of the Mie theory. We deduced error assumptions and proposed a new method on how to correct measured size distributions for these errors by redistributing the measured droplet size distribution using a stochastic approach. Second, based on a literature study, we summarized corrections for particle losses during sampling with the FM-100. We applied both corrections to cloud droplet size spectra measured at the high alpine site Jungfraujoch for a temperature range from 0 °C to 11 °C. We showed that Mie scattering led to spikes in the droplet size distributions using the default sizing procedure, while the new stochastic approach reproduced the ambient size distribution adequately. A detailed analysis of the FM-100 sampling efficiency revealed that particle losses were typically below 10% for droplet diameters up to 10 μm. For larger droplets, particle losses can increase up to 90% for the largest droplets of 50 μm at ambient wind speeds below 4.4 m s−1 and even to >90% for larger angles between the instrument orientation and the wind vector (sampling angle at higher wind speeds. Comparisons of the FM-100 to other reference instruments revealed that the total liquid water content (LWC measured by the FM-100 was more sensitive to particle losses than to re-sizing based on Mie scattering, while the total number concentration was only marginally influenced by particle losses. Consequently, for further LWC measurements with the FM-100 we strongly recommend to consider (1 the

  13. Biomimetic Membrane Arrays on Cast Hydrogel Supports

    DEFF Research Database (Denmark)

    Roerdink-Lander, Monique; Ibragimova, Sania; Rein Hansen, Christian;

    2011-01-01

    Lipid bilayers are intrinsically fragile and require mechanical support in technical applications based on biomimetic membranes. Tethering the lipid bilayer membranes to solid substrates, either directly through covalent or ionic substrate−lipid links or indirectly on substrate-supported cushions......, provides mechanical support but at the cost of small molecule transport through the membrane−support sandwich. To stabilize biomimetic membranes while allowing transport through a membrane−support sandwich, we have investigated the feasibility of using an ethylene tetrafluoroethylene (ETFE......)/hydrogel sandwich as the support. The sandwich is realized as a perforated surface-treated ETFE film onto which a hydrogel composite support structure is cast. We report a simple method to prepare arrays of lipid bilayer membranes with low intrinsic electrical conductance on the highly permeable, self...

  14. Using hydrogels in microscopy: A tutorial.

    Science.gov (United States)

    Flood, Peter; Page, Henry; Reynaud, Emmanuel G

    2016-05-01

    Sample preparation for microscopy is a crucial step to ensure the best experimental outcome. It often requires the use of specific mounting media that have to be tailored to not just the sample but the chosen microscopy technique. The media must not damage the sample or impair the optical path, and may also have to support the correct physiological function/development of the sample. For decades, researchers have used embedding media such as hydrogels to maintain samples in place. Their ease of use and transparency has promoted them as mainstream mounting media. However, they are not as straightforward to implement as assumed. They can contain contaminants, generate forces on the sample, have complex diffusion and structural properties that are influenced by multiple factors and are generally not designed for microscopy in mind. This short review will discuss the advantages and disadvantages of using hydrogels for microscopy sample preparation and highlight some of the less obvious problems associated with the area.

  15. Piezoresistive Chemical Sensors Based on Functionalized Hydrogels

    Directory of Open Access Journals (Sweden)

    Margarita Guenther

    2014-06-01

    Full Text Available Thin films of analyte-specific hydrogels were combined with microfabricated piezoresistive pressure transducers to obtain chemomechanical sensors that can serve as selective biochemical sensors for a continuous monitoring of metabolites. The gel swelling pressure has been monitored in simulated physiological solutions by means of the output signal of piezoresistive sensors. The interference by fructose, human serum albumin, pH, and ionic concentration on glucose sensing was studied. With the help of a database containing the calibration curves of the hydrogel-based sensors at different values of pH and ionic strength, the corrected values of pH and glucose concentration were determined using a novel calibration algorithm.

  16. Protease-degradable electrospun fibrous hydrogels

    Science.gov (United States)

    Wade, Ryan J.; Bassin, Ethan J.; Rodell, Christopher B.; Burdick, Jason A.

    2015-03-01

    Electrospun nanofibres are promising in biomedical applications to replicate features of the natural extracellular matrix (ECM). However, nearly all electrospun scaffolds are either non-degradable or degrade hydrolytically, whereas natural ECM degrades proteolytically, often through matrix metalloproteinases. Here we synthesize reactive macromers that contain protease-cleavable and fluorescent peptides and are able to form both isotropic hydrogels and electrospun fibrous hydrogels through a photoinitiated polymerization. These biomimetic scaffolds are susceptible to protease-mediated cleavage in vitro in a protease dose-dependent manner and in vivo in a subcutaneous mouse model using transdermal fluorescent imaging to monitor degradation. Importantly, materials containing an alternate and non-protease-cleavable peptide sequence are stable in both in vitro and in vivo settings. To illustrate the specificity in degradation, scaffolds with mixed fibre populations support selective fibre degradation based on individual fibre degradability. Overall, this represents a novel biomimetic approach to generate protease-sensitive fibrous scaffolds for biomedical applications.

  17. Hydrogels for central nervous system therapeutic strategies.

    Science.gov (United States)

    Russo, Teresa; Tunesi, Marta; Giordano, Carmen; Gloria, Antonio; Ambrosio, Luigi

    2015-12-01

    The central nervous system shows a limited regenerative capacity, and injuries or diseases, such as those in the spinal, brain and retina, are a great problem since current therapies seem to be unable to achieve good results in terms of significant functional recovery. Different promising therapies have been suggested, the aim being to restore at least some of the lost functions. The current review deals with the use of hydrogels in developing advanced devices for central nervous system therapeutic strategies. Several approaches, involving cell-based therapy, delivery of bioactive molecules and nanoparticle-based drug delivery, will be first reviewed. Finally, some examples of injectable hydrogels for the delivery of bioactive molecules in central nervous system will be reported, and the key features as well as the basic principles in designing multifunctional devices will be described.

  18. Droplet motion driven by electro-elasto-capillary effects

    Science.gov (United States)

    Shah, Jaymeen; Yang, Xin; Sun, Ying

    2013-11-01

    The motion of droplets on natural and synthetic fibers underlines many technological applications including flexible displays, insulation, and smart filters. However, there is a lack of fundamental understanding of the coupled electrical, elastic, and capillary forces on droplets in fiber networks. In the present study, the motion of a water droplet suspended between two electrically insulated fibers of different Young's modulus, lengths and diameters are examined under electric fields. The results on rigid fibers reveal a critical voltage, under which the droplet remain stationary. Above this critical voltage, droplet self-propulsion is observed as a result of the interplay of electro, elasto and capillary forces on the droplet. The effects of the inter-fiber distance and Young's modulus on droplet motion are also discussed. The controllable motion of droplets can be used to manipulate or transport liquid at small scales.

  19. Heat transfer and phase change in an impinging droplet

    Science.gov (United States)

    Rangchian, Aysan; Shirazi, Nikki L.; Kavehpour, H. Pirouz

    2016-11-01

    Non isothermal droplet impact on solid surfaces has several industrial applications such as spray cooling and 3D printing. Impinging of a droplet on a surface involves an initial phase of spreading followed by a subsequent return to the equilibrium shape. Thermal energy exchanged within the droplet fluid as well as between liquid/solid during the impact has been studied using an ultra high speed infrared camera. Variable parameters in the experiment include droplet temperature and kinetic energy of the droplet during the impact. The evolution of droplet shape viewed by IR camera is similar to what previously observed by high speed photography. The thermal map of droplet over time in these experiments agrees with previously reported numerical simulation. In addition, spacial and temporal temperature variations of liquid droplets on a surface as they solidify are presented. IR camera provides an accurate temperature diagram as the phase change occurs, which is essential for understanding the physics of 3D printing.

  20. Droplets Fusion in a Microchannel on a Piezoelectric Substrate

    Directory of Open Access Journals (Sweden)

    Fu Xiang-ting

    2013-07-01

    Full Text Available Fusion droplets is a key operation in a microfluidic device for microfluidic analysis. A new fusion method for droplets was presented. An interditigal transducer and a reflector were fabricated on 1280-yx LiNbO3 piezoelectric substrate using microelectric technology. A poly-dimethyl silicone micro-channel was made by soft lithography technology and mounted on the piezoelectric substrate. Droplets in the microchannel were actuated by surface acoustic wave and fussed each other. Coloured dye solution droplets were used to fusion experiments. Results show that the two droplets in the microchannel can be fused by help of surface acoustic wave, and size of droplets, distance of droplets and RF signal power can affect successful fusion of the droplets. The fusion method is valuable for microlfuidic biological and chemical analysis in a microfluidic device.

  1. Droplet Velocity in an Electrowetting on Dielectric Digital Microfluidic Device

    Directory of Open Access Journals (Sweden)

    Mun Mun Nahar

    2016-04-01

    Full Text Available In many electrowetting on dielectric (EWOD based microfluidics devices, droplet actuation speed is a crucial performance-controlling parameter. Our present study aims to characterize and study droplet speed in a typical EWOD device. First, a practical droplet speed measurement method has been methodically demonstrated and some related velocity terms have been introduced. Next, influence of electrode shape on droplet speed has been studied and a new design to enhance droplet speed has been proposed and experimentally demonstrated. Instead of using square shaped electrodes, rectangular electrodes with smaller widths are used to actuate droplets. Additionally, different schemes of activating electrodes are studied and compared for the same applied voltage. The experiments show that a particular scheme of activating the array of rectangular electrodes enhances the droplet speed up to 100% in comparison to the droplet speed in a conventional device with square shaped electrodes.

  2. Combinatorial microfluidic droplet engineering for biomimetic material synthesis

    Science.gov (United States)

    Bawazer, Lukmaan A.; McNally, Ciara S.; Empson, Christopher J.; Marchant, William J.; Comyn, Tim P.; Niu, Xize; Cho, Soongwon; McPherson, Michael J.; Binks, Bernard P.; deMello, Andrew; Meldrum, Fiona C.

    2016-01-01

    Although droplet-based systems are used in a wide range of technologies, opportunities for systematically customizing their interface chemistries remain relatively unexplored. This article describes a new microfluidic strategy for rapidly tailoring emulsion droplet compositions and properties. The approach uses a simple platform for screening arrays of droplet-based microfluidic devices and couples this with combinatorial selection of the droplet compositions. Through the application of genetic algorithms over multiple screening rounds, droplets with target properties can be rapidly generated. The potential of this method is demonstrated by creating droplets with enhanced stability, where this is achieved by selecting carrier fluid chemistries that promote titanium dioxide formation at the droplet interfaces. The interface is a mixture of amorphous and crystalline phases, and the resulting composite droplets are biocompatible, supporting in vitro protein expression in their interiors. This general strategy will find widespread application in advancing emulsion properties for use in chemistry, biology, materials, and medicine.

  3. Comparison of Development of Dry Eye in Conventional Hydrogel and Silicone Hydrogel Contact Lens Users

    Directory of Open Access Journals (Sweden)

    Rukiye Aydın

    2013-01-01

    Full Text Available Pur po se: To compare the level and severity of dry eye between conventional hydrogel and silicone hydrogel contact lens users by using dry eye questionnaires and clinical tests. Ma te ri al and Met hod: Forty-two contact lens users who attended the Cornea and Contact Lens Unit, Department of Ophthalmology at Dokuz Eylül University, were included in this study. The first group consisted of subjects who have used conventional hydrogel (CHL contact lens for minimum one year and maximum five years. The second group consisted of subjects who have used silicone hydrogel (SHL contact lens for minimum one year and maximum 5 years. Twenty healthy individuals with no history of contact lens use were included in the control group. OSDI (Ocular Surface Disease Index questionnaire was performed to all patients. The tear function was determined by Schirmer’s test and tear break-up time in all three groups. Re sults: There was no statistically significant OSDI score differences between CHL and SHL users. Nevertheless, it was noted that OSDI score in both groups was statistically higher than in the control group. There was no statistically significant difference in tear break-up time between CHL and SHL users. On the other hand, tear break-up time was significantly lower in both groups when compared to the control group. There was no significant difference among the groups for Schirmer scoring. Dis cus si on: The use of conventional hydrogel and silicone hydrogel lenses causes a decline in tear break-up time leading to dry eye symptoms. However, no differences were determined between CHL and SHL users with regard to the severity of dry eye symptoms. (Turk J Ophthalmol 2013; 43: 7-14

  4. Measurement errors related to contact angle analysis of hydrogel and silicone hydrogel contact lenses.

    Science.gov (United States)

    Read, Michael L; Morgan, Philip B; Maldonado-Codina, Carole

    2009-11-01

    This work sought to undertake a comprehensive investigation of the measurement errors associated with contact angle assessment of curved hydrogel contact lens surfaces. The contact angle coefficient of repeatability (COR) associated with three measurement conditions (image analysis COR, intralens COR, and interlens COR) was determined by measuring the contact angles (using both sessile drop and captive bubble methods) for three silicone hydrogel lenses (senofilcon A, balafilcon A, lotrafilcon A) and one conventional hydrogel lens (etafilcon A). Image analysis COR values were about 2 degrees , whereas intralens COR values (95% confidence intervals) ranged from 4.0 degrees (3.3 degrees , 4.7 degrees ) (lotrafilcon A, captive bubble) to 10.2 degrees (8.4 degrees , 12.1 degrees ) (senofilcon A, sessile drop). Interlens COR values ranged from 4.5 degrees (3.7 degrees , 5.2 degrees ) (lotrafilcon A, captive bubble) to 16.5 degrees (13.6 degrees , 19.4 degrees ) (senofilcon A, sessile drop). Measurement error associated with image analysis was shown to be small as an absolute measure, although proportionally more significant for lenses with low contact angle. Sessile drop contact angles were typically less repeatable than captive bubble contact angles. For sessile drop measures, repeatability was poorer with the silicone hydrogel lenses when compared with the conventional hydrogel lens; this phenomenon was not observed for the captive bubble method, suggesting that methodological factors related to the sessile drop technique (such as surface dehydration and blotting) may play a role in the increased variability of contact angle measurements observed with silicone hydrogel contact lenses.

  5. Controlled Delivery of Vancomycin via Charged Hydrogels.

    Directory of Open Access Journals (Sweden)

    Carl T Gustafson

    Full Text Available Surgical site infection (SSI remains a significant risk for any clean orthopedic surgical procedure. Complications resulting from an SSI often require a second surgery and lengthen patient recovery time. The efficacy of antimicrobial agents delivered to combat SSI is diminished by systemic toxicity, bacterial resistance, and patient compliance to dosing schedules. We submit that development of localized, controlled release formulations for antimicrobial compounds would improve the effectiveness of prophylactic surgical wound antibiotic treatment while decreasing systemic side effects. Our research group developed and characterized oligo(poly(ethylene glycolfumarate/sodium methacrylate (OPF/SMA charged copolymers as biocompatible hydrogel matrices. Here, we report the engineering of this copolymer for use as an antibiotic delivery vehicle in surgical applications. We demonstrate that these hydrogels can be efficiently loaded with vancomycin (over 500 μg drug per mg hydrogel and this loading mechanism is both time- and charge-dependent. Vancomycin release kinetics are shown to be dependent on copolymer negative charge. In the first 6 hours, we achieved as low as 33.7% release. In the first 24 hours, under 80% of total loaded drug was released. Further, vancomycin release from this system can be extended past four days. Finally, we show that the antimicrobial activity of released vancomycin is equivalent to stock vancomycin in inhibiting the growth of colonies of a clinically derived strain of methicillin-resistant Staphylococcus aureus. In summary, our work demonstrates that OPF/SMA hydrogels are appropriate candidates to deliver local antibiotic therapy for prophylaxis of surgical site infection.

  6. Controlled Angiogenesis in Peptide Nanofiber Composite Hydrogels

    OpenAIRE

    Wickremasinghe, Navindee C.; Kumar, Vivek A.; Shi, Siyu; Hartgerink, Jeffrey D.

    2015-01-01

    Multidomain peptide (MDP) nanofibers create scaffolds that can present bioactive cues to promote biological responses. Orthogonal self-assembly of MDPs and growth-factor-loaded liposomes generate supramolecular composite hydrogels. These composites can act as delivery vehicles with time-controlled release. Here we examine the controlled release of placental growth factor-1 (PlGF-1) for its ability to induce angiogenic responses. PlGF-1 was loaded either in MDP matrices or within liposomes bou...

  7. Controlled Delivery of Vancomycin via Charged Hydrogels.

    Science.gov (United States)

    Gustafson, Carl T; Boakye-Agyeman, Felix; Brinkman, Cassandra L; Reid, Joel M; Patel, Robin; Bajzer, Zeljko; Dadsetan, Mahrokh; Yaszemski, Michael J

    2016-01-01

    Surgical site infection (SSI) remains a significant risk for any clean orthopedic surgical procedure. Complications resulting from an SSI often require a second surgery and lengthen patient recovery time. The efficacy of antimicrobial agents delivered to combat SSI is diminished by systemic toxicity, bacterial resistance, and patient compliance to dosing schedules. We submit that development of localized, controlled release formulations for antimicrobial compounds would improve the effectiveness of prophylactic surgical wound antibiotic treatment while decreasing systemic side effects. Our research group developed and characterized oligo(poly(ethylene glycol)fumarate)/sodium methacrylate (OPF/SMA) charged copolymers as biocompatible hydrogel matrices. Here, we report the engineering of this copolymer for use as an antibiotic delivery vehicle in surgical applications. We demonstrate that these hydrogels can be efficiently loaded with vancomycin (over 500 μg drug per mg hydrogel) and this loading mechanism is both time- and charge-dependent. Vancomycin release kinetics are shown to be dependent on copolymer negative charge. In the first 6 hours, we achieved as low as 33.7% release. In the first 24 hours, under 80% of total loaded drug was released. Further, vancomycin release from this system can be extended past four days. Finally, we show that the antimicrobial activity of released vancomycin is equivalent to stock vancomycin in inhibiting the growth of colonies of a clinically derived strain of methicillin-resistant Staphylococcus aureus. In summary, our work demonstrates that OPF/SMA hydrogels are appropriate candidates to deliver local antibiotic therapy for prophylaxis of surgical site infection.

  8. Insitu grafting silica nanoparticles reinforced nanocomposite hydrogels

    Science.gov (United States)

    Yang, Jun; Han, Chun-Rui; Duan, Jiu-Fang; Xu, Feng; Sun, Run-Cang

    2013-10-01

    Highly flexible nanocomposite hydrogels were prepared by using silica nanoparticles (SNPs) as fillers and multi-functional cross-links to graft hydrophilic poly(acrylic acid) (PAA) by free radical polymerization from an aqueous solution. The SNPs were collected by neighboring polymer chains and dispersed uniformly within a PAA matrix. The mechanical properties of the nanocomposite hydrogels were tailored by the concentration of SNPs according to the percolation model. It was proposed that covalent bonds of adsorbed chains on the filler surface resulted in the formation of a shell of an immobilized glassy layer and trapped entanglements, where the glassy polymer layer greatly enhanced the elastic modulus and the release of trapped entanglements at deformation contributed to the viscoelastic properties.Highly flexible nanocomposite hydrogels were prepared by using silica nanoparticles (SNPs) as fillers and multi-functional cross-links to graft hydrophilic poly(acrylic acid) (PAA) by free radical polymerization from an aqueous solution. The SNPs were collected by neighboring polymer chains and dispersed uniformly within a PAA matrix. The mechanical properties of the nanocomposite hydrogels were tailored by the concentration of SNPs according to the percolation model. It was proposed that covalent bonds of adsorbed chains on the filler surface resulted in the formation of a shell of an immobilized glassy layer and trapped entanglements, where the glassy polymer layer greatly enhanced the elastic modulus and the release of trapped entanglements at deformation contributed to the viscoelastic properties. Electronic supplementary information (ESI) available: FTIR spectra of SNP after silane treatment, dynamic oscillatory shear measurements as a function of frequency, constrained polymer chain analysis by a change in the peak height in loss factor spectra, molecular weight of grafted chains at different stages of gelation, prediction of the SNP reinforcing mechanism in the

  9. Sensitive and predictable separation of microfluidic droplets by size using in-line passive filter.

    Science.gov (United States)

    Ding, Ruihua; Ung, W Lloyd; Heyman, John A; Weitz, David A

    2017-01-01

    Active manipulation of droplets is crucial in droplet microfluidics. However, droplet polydispersity decreases the accuracy of active manipulation. We develop a microfluidic "droplet filter" that accurately separates droplets by size. The droplet filter has a sharp size cutoff and is capable of distinguishing droplets differing in volume by 20%. A simple model explains the behavior of the droplets as they pass through the filter. We show application of the filter in improving dielectric sorting efficiency.

  10. Engineering hydrogels as extracellular matrix mimics.

    Science.gov (United States)

    Geckil, Hikmet; Xu, Feng; Zhang, Xiaohui; Moon, SangJun; Demirci, Utkan

    2010-04-01

    Extracellular matrix (ECM) is a complex cellular environment consisting of proteins, proteoglycans, and other soluble molecules. ECM provides structural support to mammalian cells and a regulatory milieu with a variety of important cell functions, including assembling cells into various tissues and organs, regulating growth and cell-cell communication. Developing a tailored in vitro cell culture environment that mimics the intricate and organized nanoscale meshwork of native ECM is desirable. Recent studies have shown the potential of hydrogels to mimic native ECM. Such an engineered native-like ECM is more likely to provide cells with rational cues for diagnostic and therapeutic studies. The research for novel biomaterials has led to an extension of the scope and techniques used to fabricate biomimetic hydrogel scaffolds for tissue engineering and regenerative medicine applications. In this article, we detail the progress of the current state-of-the-art engineering methods to create cell-encapsulating hydrogel tissue constructs as well as their applications in in vitro models in biomedicine.

  11. Novel thermosensitive chitosan hydrogels: in vivo evaluation.

    Science.gov (United States)

    Patois, Emilie; Osorio-da Cruz, Suzanne; Tille, Jean-Christophe; Walpoth, Beat; Gurny, Robert; Jordan, Olivier

    2009-11-01

    Chitosan is an attractive biopolymer for the preparation of hydrogels. Its unique combination of biocompatibility, biodegradability, bioadhesivity, and tissue-promoting abilities allows pharmaceutical applications. We investigated novel thermosensitive hydrogels based on chitosan homogeneously reacetylated to a deacetylation degree of about 50%, combined with selected polyols or polyoses such as trehalose, a nontoxic polysaccharide. The latter, a gel-inducing and lyoprotective agent enabled the formulation to be lyophilized and rehydrated without affecting the thermosensitive behavior. This made possible long-term storage and promoted its use in a clinical setup. The thermally induced sol-gel transition allowed injectability and in situ setting. Rheological characterization revealed that storage moduli could be increased by one decade by increasing the chitosan concentration from 1.4 to 2.2% (w/w). Evaluation in vivo provided evidence of in situ implant formation in subcutaneous tissue of Sprague-Dawley rats and permanence for up to 3 months. Histopathological analysis demonstrated a mild, chronic, inflammatory reaction that disappeared with the complete absorption of the gel implant over a few months period. Such in situ forming hydrogels could be advantageous for specific applications in drug delivery and tissue engineering.

  12. Chitosan Hydrogel Structure Modulated by Metal Ions

    Science.gov (United States)

    Nie, Jingyi; Wang, Zhengke; Hu, Qiaoling

    2016-10-01

    As one of the most important polysaccharide, chitosan (CS) has generated a great deal of interest for its desirable properties and wide applications. In the utilization of CS materials, hydrogel is a major and vital branch. CS has the ability to coordinate with many metal ions by a chelation mechanism. While most researchers focused on the applications of complexes between CS and metal ions, the complexes can also influence gelation process and structure of CS hydrogel. In the present work, such influence was studied with different metal ions, revealing two different kinds of mechanisms. Strong affinity between CS and metal ions leads to structural transition from orientation to multi-layers, while weak affinity leads to composite gel with in-situ formed inorganic particles. The study gave a better understanding of the gelation mechanism and provided strategies for the modulation of hydrogel morphology, which benefited the design of new CS-based materials with hierarchical structure and facilitated the utilization of polysaccharide resources.

  13. Protein surface patterning using nanoscale PEG hydrogels.

    Science.gov (United States)

    Hong, Ye; Krsko, Peter; Libera, Matthew

    2004-12-01

    We have used focused electron-beam cross-linking to create nanosized hydrogels and thus present a new method with which to bring the attractive biocompatibility associated with macroscopic hydrogels into the submicron length-scale regime. Using amine-terminated poly(ethylene glycol) thin films on silicon substrates, we generate nanohydrogels with lateral dimensions of order 200 nm which can swell by a factor of at least five, depending on the radiative dose. With the focused electron beam, high-density arrays of such nanohydrogels can be flexibly patterned onto silicon surfaces. Significantly, the amine groups remain functional after e-beam exposure, and we show that they can be used to covalently bind proteins and other molecules. We use bovine serum albumin to amplify the number of amine groups, and we further demonstrate that different proteins can be covalently bound to different hydrogel pads on the same substrate to create multifunctional surfaces useful in emerging bio/proteomic and sensor technologies.

  14. 21 CFR 878.4022 - Hydrogel wound dressing and burn dressing.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Hydrogel wound dressing and burn dressing. 878... Hydrogel wound dressing and burn dressing. (a) Identification. A hydrogel wound dressing is a sterile or... percent) and capable of absorbing exudate. This classification does not include a hydrogel wound...

  15. An extension of dynamic droplet deformation models to secondary atomization

    NARCIS (Netherlands)

    Bartz, F.O.; Schmehl, R.; Koch, R.; Bauer, H.J.

    2010-01-01

    A detailed model for secondary atomization of liquid droplets by aerodynamic forces is presented. As an empirical extension of dynamic droplet deformation models, it accounts for temporal variations of the relative velocity between droplet and gas phase during the deformation and breakup process and

  16. Lattice Boltzmann simulations of droplet formation during microchannel emulsification

    NARCIS (Netherlands)

    Zwan, van der E.A.; Sman, van der R.G.M.; Schroën, C.G.P.H.; Boom, R.M.

    2009-01-01

    In this study, we compared microchannel droplet formation in a microfluidics device with a two phase lattice Boltzmann simulation. The droplet formation was found to be qualitatively described, with a slightly smaller droplet in the simulation. This was due to the finite thickness of the interface i

  17. Current status of droplet evaporation in turbulent flows

    Energy Technology Data Exchange (ETDEWEB)

    Birouk, Madjid [Department of Mechanical and Manufacturing Engineering, University of Manitoba, Winnipeg, MB (Canada); Goekalp, Iskender [Laboratoire de Combustion et Systemes Reactifs, Centre National de la Recherche Scientifique, 45071 Orleans Cedex 2 (France)

    2006-07-01

    This article reviews the available literature results concerning the effects of turbulence on the transport (heat and mass transfer) rates from a droplet. The survey emphasizes recent findings related specifically to physical models and correlations for predicting turbulence effects on the vaporization rate of a droplet. In addition, several research challenges on the vaporization of fuel droplets in turbulent flow environments are outlined. (author)

  18. Rheology and phase behavior of aggregating emulsions related to droplet-droplet interactions

    Directory of Open Access Journals (Sweden)

    C. L. A. Berli

    2007-06-01

    Full Text Available The present work deals with the relationship between colloidal interactions and physical properties of emulsions, in particular rheology and gel transition. Experimental data on protein-stabilized oil-in-water emulsions are considered. In this system, the excess of protein in the aqueous phase yields reversible droplet aggregation by the mechanism of depletion. Thus both phase and flow behaviors can be controlled by changing protein concentration, ionic strength and temperature. Calculations of the potential of interaction between droplets are carried out in the framework of colloid science. Particular emphasis is placed on the role that droplet-droplet interaction plays in defining the morphology of the aggregates, hence the microstructure and finally, the bulk physical properties. This understanding offers new perspectives in the study of complex food systems.

  19. Hydrogel microspheres from biodegradable polymers as drug delivery systems

    Science.gov (United States)

    A series of hydrogel microspheres were prepared from pectin, a hydrophilic biopolymer, and zein, a hydrophobic biopolymer, at varying weight ratios. The hydrogel formulation was conducted in the presence of calcium or other divalent metal ions at room temperature under mild conditions. Studies of ...

  20. Application of hydrogels in heart valve tissue engineering.

    Science.gov (United States)

    Zhang, Xing; Xu, Bin; Puperi, Daniel S; Wu, Yan; West, Jennifer L; Grande-Allen, K Jane

    2015-01-01

    With an increasing number of patients requiring valve replacements, there is heightened interest in advancing heart valve tissue engineering (HVTE) to provide solutions to the many limitations of current surgical treatments. A variety of materials have been developed as scaffolds for HVTE including natural polymers, synthetic polymers, and decellularized valvular matrices. Among them, biocompatible hydrogels are generating growing interest. Natural hydrogels, such as collagen and fibrin, generally show good bioactivity but poor mechanical durability. Synthetic hydrogels, on the other hand, have tunable mechanical properties; however, appropriate cell-matrix interactions are difficult to obtain. Moreover, hydrogels can be used as cell carriers when the cellular component is seeded into the polymer meshes or decellularized valve scaffolds. In this review, we discuss current research strategies for HVTE with an emphasis on hydrogel applications. The physicochemical properties and fabrication methods of these hydrogels, as well as their mechanical properties and bioactivities are described. Performance of some hydrogels including in vitro evaluation using bioreactors and in vivo tests in different animal models are also discussed. For future HVTE, it will be compelling to examine how hydrogels can be constructed from composite materials to replicate mechanical properties and mimic biological functions of the native heart valve.

  1. Difference between Chitosan Hydrogels via Alkaline and Acidic Solvent Systems

    Science.gov (United States)

    Nie, Jingyi; Wang, Zhengke; Hu, Qiaoling

    2016-10-01

    Chitosan (CS) has generated considerable interest for its desirable properties and wide applications. Hydrogel has been proven to be a major and vital form in the applications of CS materials. Among various types of CS hydrogels, physical cross-linked CS hydrogels are popular, because they avoided the potential toxicity and sacrifice of intrinsic properties caused by cross-linking or reinforcements. Alkaline solvent system and acidic solvent system are two important solvent systems for the preparation of physical cross-linked CS hydrogels, and also lay the foundations of CS hydrogel-based materials in many aspects. As members of physical cross-linked CS hydrogels, gel material via alkaline solvent system showed significant differences from that via acidic solvent system, but the reasons behind are still unexplored. In the present work, we studied the difference between CS hydrogel via alkaline system and acidic system, in terms of gelation process, hydrogel structure and mechanical property. In-situ/pseudo in-situ studies were carried out, including fluorescent imaging of gelation process, which provided dynamic visualization. Finally, the reasons behind the differences were explained, accompanied by the discussion about design strategy based on gelation behavior of the two systems.

  2. Biocompatible cellulose-based superabsorbent hydrogels with antimicrobial activity.

    Science.gov (United States)

    Peng, Na; Wang, Yanfeng; Ye, Qifa; Liang, Lei; An, Yuxing; Li, Qiwei; Chang, Chunyu

    2016-02-10

    Current superabsorbent hydrogels commercially applied in the disposable diapers have disadvantages such as weak mechanical strength, poor biocompatibility, and lack of antimicrobial activity, which may induce skin allergy of body. To overcome these hassles, we have developed novel cellulose based hydrogels via simple chemical cross-linking of quaternized cellulose (QC) and native cellulose in NaOH/urea aqueous solution. The prepared hydrogel showed superabsorbent property, high mechanical strength, good biocompatibility, and excellent antimicrobial efficacy against Saccharomyces cerevisiae. The presence of QC in the hydrogel networks not only improved their swelling ratio via electrostatic repulsion of quaternary ammonium groups, but also endowed their antimicrobial activity by attraction of sections of anionic microbial membrane into internal pores of poly cationic hydrogel leading to the disruption of microbial membrane. Moreover, the swelling properties, mechanical strength, and antibacterial activity of hydrogels strongly depended on the contents of quaternary ammonium groups in hydrogel networks. The obtained data encouraged the use of these hydrogels for hygienic application such as disposable diapers.

  3. Hydrogel coated monoliths for enzymatic hydrolysis of penicillin G

    NARCIS (Netherlands)

    De Lathouder, K.M.; Smeltink, M.W.; Straathof, A.J.J.; Paasman, M.A.; Van de Sandt, E.J.A.X.; Kapteijn, F.; Moulijn, J.A.

    2008-01-01

    The objective of this work was to develop a hydrogel-coated monolith for the entrapment of penicillin G acylase (E. coli, PGA). After screening of different hydrogels, chitosan was chosen as the carrier material for the preparation of monolithic biocatalysts. This protocol leads to active immobilize

  4. Reinforcement of hydrogels using three-dimensionally printed microfibres

    NARCIS (Netherlands)

    Visser, Jetze; Melchels, Ferry P. W.; Jeon, June E.; van Bussel, Erik M.; Kimpton, Laura S.; Byrne, Helen M.; Dhert, Wouter J. A.; Dalton, Paul D.; Hutmacher, Dietmar W.; Malda, J

    2015-01-01

    Despite intensive research, hydrogels currently available for tissue repair in the musculoskeletal system are unable to meet the mechanical, as well as the biological, requirements for successful outcomes. Here we reinforce soft hydrogels with highly organized, high-porosity microfibre networks that

  5. Synthesis and Swelling Properties of Thermosensitive Hydrogels based on Terpolymerization

    Institute of Scientific and Technical Information of China (English)

    Cai Hua NI; Xian Yu ZENG; He HUANG

    2005-01-01

    Novel thermosensitive hydrogels based on polymerization of N-isopropyl acrylamide,Sodium acrylate, and diacetone acrylamide were synthesized. The swelling ratio and dynamic swelling were investigated. The results indicated that the hydrogels exhibited high water uptake and themosensitivity. The swelling properties and volume phase transition temperature could be adjusted by contents of the comonomers in the gels.

  6. Keratin sponge/hydrogel II, active agent delivery

    Science.gov (United States)

    Keratin sponge/hydrogels from oxidation and reduction hydrolysis of fine and coarse wool fibers were formed to behave as cationic hydrogels to swell and release active agents in the specific region of the gastro-intestinal (GI) tract. Their porous, interpenetrating networks (IPN) were effective for...

  7. Synthesis and Characterization of Phosphated Konjac Glucomannan Hydrogels

    Institute of Scientific and Technical Information of China (English)

    Li Gui CHEN; Zhi Lan LIU; Ying Jun CHEN; Ren Xi ZHUO

    2005-01-01

    Konjac glucomannan (KGM) was crosslinked with sodium tripolyphosphate (STPP) to synthesize hydrogels. The crosslinking reaction was confirmed by FT-IR. The results of degradation test show that the hydrogels retain the enzymatic degradation character of KGM and can be degraded for 74.45% in 5 days by cellulase E0240.

  8. Injectable hyaluronic acid hydrogel for 19F magnetic resonance imaging

    NARCIS (Netherlands)

    Yang, X.; Sun, Y.; Kootala, S.; Hilborn, J.; Heerschap, A.; Ossipov, D.

    2014-01-01

    We report on a 19F labeled injectable hyaluronic acid (HA) hydrogel that can be monitored by both 1H and 19F MR imaging. The HA based hydrogel formed via carbazone reaction can be obtained within a minute by simple mixing of HA-carbazate and HA-aldehyde derivatized polymers. 19F contrast agent was l

  9. Hydrogel-based sensor for CO2 measurements

    NARCIS (Netherlands)

    Herber, S.; Olthuis, W.; Bergveld, P.; Berg, van den A.

    2004-01-01

    A hydrogel-based sensor is presented for CO2 measurements. The sensor consists of a pressure sensor and porous silicon cover. A pH-sensitive hydrogel is confined between the two parts. Furthermore the porous cover contains a bicarbonate solution and a gaspermeable membrane. CO2 reacts with the solut

  10. Functionalized graphene hydrogel-based high-performance supercapacitors.

    Science.gov (United States)

    Xu, Yuxi; Lin, Zhaoyang; Huang, Xiaoqing; Wang, Yang; Huang, Yu; Duan, Xiangfeng

    2013-10-25

    Functionalized graphene hydrogels are prepared by a one-step low-temperature reduction process and exhibit ultrahigh specific capacitances and excellent cycling stability in the aqueous electrolyte. Flexible solid-state supercapacitors based on functionalized graphene hydrogels are demonstrated with superior capacitive performances and extraordinary mechanical flexibility.

  11. A Photochromic Copolymer Hydrogel Contact Lens: From Synthesis to Application

    Directory of Open Access Journals (Sweden)

    Xiaoli Yang

    2016-01-01

    Full Text Available A photochromic poly(2-hydroxyl-ethyl methacrylate-N-vinylpyrrolidone-spironaphthoxazine hydrogel (p(HEMA-NVP-SPO has been designed and synthesized by free radical polymerization in this work. The chemical and structural information of hydrogels was investigated by IR spectra, equilibrium water content (EWC, and SEM. The IR spectra confirmed successful synthesis of copolymer. The domain of NVP contributed to not only EWC but also inner structure of hydrogel, while SPO had little influence on these properties of hydrogel. The photochromic behaviors of hydrogel including photochromic properties and thermal fading kinetics were systematically studied and compared with hydrogel made by immersing method. Results showed that when SPO was incorporated in hydrogel by polymerization, maximum absorbance wavelength got shorter, and the relaxation half-life became longer. In addition, salicylic acid as a drug model could be loaded into hydrogel by immersing method, and its sustained drug release in a given period was dependent on the characteristics of solution and loading time.

  12. Versatile click alginate hydrogels crosslinked via tetrazine-norbornene chemistry.

    Science.gov (United States)

    Desai, Rajiv M; Koshy, Sandeep T; Hilderbrand, Scott A; Mooney, David J; Joshi, Neel S

    2015-05-01

    Alginate hydrogels are well-characterized, biologically inert materials that are used in many biomedical applications for the delivery of drugs, proteins, and cells. Unfortunately, canonical covalently crosslinked alginate hydrogels are formed using chemical strategies that can be biologically harmful due to their lack of chemoselectivity. In this work we introduce tetrazine and norbornene groups to alginate polymer chains and subsequently form covalently crosslinked click alginate hydrogels capable of encapsulating cells without damaging them. The rapid, bioorthogonal, and specific click reaction is irreversible and allows for easy incorporation of cells with high post-encapsulation viability. The swelling and mechanical properties of the click alginate hydrogel can be tuned via the total polymer concentration and the stoichiometric ratio of the complementary click functional groups. The click alginate hydrogel can be modified after gelation to display cell adhesion peptides for 2D cell culture using thiol-ene chemistry. Furthermore, click alginate hydrogels are minimally inflammatory, maintain structural integrity over several months, and reject cell infiltration when injected subcutaneously in mice. Click alginate hydrogels combine the numerous benefits of alginate hydrogels with powerful bioorthogonal click chemistry for use in tissue engineering applications involving the stable encapsulation or delivery of cells or bioactive molecules.

  13. A constitutive model of nanocomposite hydrogels with nanoparticle crosslinkers

    Science.gov (United States)

    Wang, Qiming; Gao, Zheming

    2016-09-01

    Nanocomposite hydrogels with only nanoparticle crosslinkers exhibit extraordinarily higher stretchability and toughness than the conventional organically crosslinked hydrogels, thus showing great potential in the applications of artificial muscles and cartilages. Despite their potential, the microscopic mechanics details underlying their mechanical performance have remained largely elusive. Here, we develop a constitutive model of the nanoparticle hydrogels to elucidate the microscopic mechanics behaviors, including the microarchitecture and evolution of the nanoparticle crosslinked polymer chains during the mechanical deformation. The constitutive model enables us to understand the Mullins effect of the nanocomposite hydrogels, and the effects of nanoparticle concentrations and sizes on their cyclic stress-strain behaviors. The theory is quantitatively validated by the tensile tests on a nanocomposite hydrogel with nanosilica crosslinkers. The theory can also be extended to explain the mechanical behaviors of existing hydrogels with nanoclay crosslinkers, and the necking instability of the composite hydrogels with both nanoparticle crosslinkers and organic crosslinkers. We expect that this constitutive model can be further exploited to reveal mechanics behaviors of novel particle-polymer chain interactions, and to design unprecedented hydrogels with both high stretchability and toughness.

  14. Macromolecular diffusion in self-assembling biodegradable thermosensitive hydrogels

    NARCIS (Netherlands)

    Vermonden, T.; Jena, S.S.; Barriet, D.; Censi, R.; Gucht, van der J.; Hennink, W.E.; Siegel, R.A.

    2010-01-01

    Hydrogel formation triggered by a change in temperature is an attractive mechanism for in situ gelling biomaterials for pharmaceutical applications such as the delivery of therapeutic proteins. In this study, hydrogels were prepared from ABA triblock polymers having thermosensitive poly(N-(2-hydroxy

  15. HIGH-STRENGTH POLY(METH)ACRYLAMIDE COPOLYMER HYDROGELS

    NARCIS (Netherlands)

    WIERSMA, JA; SOS, M; PENNINGS, AJ

    1994-01-01

    The hydrogels described here are copolymers of acrylamide and methacrylamide highly cross-linked with piperazine diacrylamide or 4,7,10-trioxa-1,13-tridecanediamine diacrylamide by radical polymerisation in highly concentrated aqueous and aqueous gelatin solutions. The hydrogels were characterised b

  16. Processing Techniques and Applications of Silk Hydrogels in Bioengineering

    Directory of Open Access Journals (Sweden)

    Michael Floren

    2016-09-01

    Full Text Available Hydrogels are an attractive class of tunable material platforms that, combined with their structural and functional likeness to biological environments, have a diversity of applications in bioengineering. Several polymers, natural and synthetic, can be used, the material selection being based on the required functional characteristics of the prepared hydrogels. Silk fibroin (SF is an attractive natural polymer for its excellent processability, biocompatibility, controlled degradation, mechanical properties and tunable formats and a good candidate for the fabrication of hydrogels. Tremendous effort has been made to control the structural and functional characteristic of silk hydrogels, integrating novel biological features with advanced processing techniques, to develop the next generation of functional SF hydrogels. Here, we review the several processing methods developed to prepare advanced SF hydrogel formats, emphasizing a bottom-up approach beginning with critical structural characteristics of silk proteins and their behavior under specific gelation environments. Additionally, the preparation of SF hydrogel blends and other advanced formats will also be discussed. We conclude with a brief description of the attractive utility of SF hydrogels in relevant bioengineering applications.

  17. Processing Techniques and Applications of Silk Hydrogels in Bioengineering

    Science.gov (United States)

    Floren, Michael; Migliaresi, Claudio; Motta, Antonella

    2016-01-01

    Hydrogels are an attractive class of tunable material platforms that, combined with their structural and functional likeness to biological environments, have a diversity of applications in bioengineering. Several polymers, natural and synthetic, can be used, the material selection being based on the required functional characteristics of the prepared hydrogels. Silk fibroin (SF) is an attractive natural polymer for its excellent processability, biocompatibility, controlled degradation, mechanical properties and tunable formats and a good candidate for the fabrication of hydrogels. Tremendous effort has been made to control the structural and functional characteristic of silk hydrogels, integrating novel biological features with advanced processing techniques, to develop the next generation of functional SF hydrogels. Here, we review the several processing methods developed to prepare advanced SF hydrogel formats, emphasizing a bottom-up approach beginning with critical structural characteristics of silk proteins and their behavior under specific gelation environments. Additionally, the preparation of SF hydrogel blends and other advanced formats will also be discussed. We conclude with a brief description of the attractive utility of SF hydrogels in relevant bioengineering applications. PMID:27649251

  18. CFD Simulations of Vibration Induced Droplet Ejection.

    Science.gov (United States)

    James, Ashley; Smith, Marc K.; Glezer, Ari

    1998-11-01

    Vibration-induced droplet ejection is a process that occurs when a liquid droplet is placed on a vibrating membrane. Above a critical value of the excitation amplitude, Faraday waves form on the surface of the drop. As the amplitude is increased secondary drops are ejected from the wave crests. A Navier-Stokes solver designed to simulate the transient fluid mechanics of the process is presented. The solver is based on a MAC method on a staggered grid. A volume of fluid method is implemented to track the free surface. The volume fraction is advected via a second-order, unsplit method that minimizes numerical diffusion of the interface. Surface tension is incorporated as a continuum surface force. This work is intended to provide a comprehensive description of the fluid dynamics involved in vibration-induced droplet ejection, with the aim of understanding the mechanism behind the ejection process. The evolution of the interface through droplet ejection will be simulated. The dependence of the ejection process on the driving parameters will be evaluated and the resonance characteristics of the drop will be determined. The results of the computations will be compared with experimental results.

  19. Moving droplets: The measurement of contact lines

    NARCIS (Netherlands)

    Poelma, C.; Franken, M.J.Z.; Kim, H.; Westerweel, J.

    2014-01-01

    Contact lines are the locations where a gas, liquid and a solid meet. From everyday experience we know that such contact lines can be mobile, for example in the case of a water droplet sliding over a glass surface. However, the continuum description of the flow towards or away from a contact line im

  20. The Physics of Foams, Droplets and Bubbles

    Science.gov (United States)

    Sarker, Dipak K.

    2013-01-01

    Foams or bubble dispersions are common to milkshakes, bread, champagne froth, shaving mousse, shampoo, crude oil extraction systems, upholstery packing and bubble wrap, whereas the term droplet is often synonymous with either a small drop of water or a drop of oil--a type of coarse dispersion. The latter are seen in butter and milk, household…

  1. Superheated Droplet Detector Response for Temperature

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Superheated droplet detector has the following advantages: Used repeatedly, recording the cumulative dose, using both indoors and outdoors, compacting; relatively low cost, direct reading of the bubbles using the naked eye, and working in gamma-neutron mixed-field well

  2. Surface tension of evaporating nanofluid droplets

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Ruey-Hung [Univ. of Central Florida, Orlando, FL (United States); Phuoc, Tran X. [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Martello, Donald [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States)

    2011-05-01

    Measurements of nanofluid surface tension were made using the pendant droplet method. Three different types of nanoparticles were used - laponite, silver and Fe2O3 - with de-ionized water (DW) as the base fluid. The reported results focus on the following categories; (1) because some nanoparticles require surfactants to form stable colloids, the individual effects of the surfactant and the particles were investigated; (2) due to evaporation of the pendant droplet, the particle concentration increases, affecting the apparent surface tension; (3) because of the evaporation process, a hysteresis was found where the evaporating droplet can only achieve lower values of surface tension than that of nanofluids at the same prepared concentrations: and (4) the Stefan equation relating the apparent surface tension and heat of evaporation was found to be inapplicable for nanofluids investigated. Comparisons with findings for sessile droplets are also discussed, pointing to additional effects of nanoparticles other than the non-equilibrium evaporation process.

  3. Adjuvants for single droplet application of glyphosate

    DEFF Research Database (Denmark)

    Mathiassen, Solvejg K.; Kudsk, Per; Lund, Ivar

    2016-01-01

    Retention and biological activity of droplets of glyphosate deposited onto plant leaves using a Drop on Demand inkjet printer application system, was examined on pot-grown Brassica napus, Solanum nigrum, Chenopodium album, Silene noctiflora and Echinocloa crus-galli plants. Retention was measured...... but the biological activity of glyphosate was not improved....

  4. Prediction on Droplet Sauter Mean Diameter in Gas-Liquid Mist Flow Based on Droplet Fractal Theory

    OpenAIRE

    Jian-Yi Liu; Xiao-Hua Tan; Zhou Fan; Xu-Tao You; Zhou Li; Jia-Hui Zhao

    2015-01-01

    We present a fractal model for droplet Sauter mean diameter in gas-liquid mist flow, based on the droplet fractal theory and the balance relationship between total droplet surface energy and total gas turbulent kinetic energy. The present model is expressed as functions of the droplet fractal dimension, gas superficial velocity, liquid superficial velocity, and other fluid characteristics. Agreement between the present model predictions and experimental measurements is obtained. Results verif...

  5. Prediction on Droplet Sauter Mean Diameter in Gas-Liquid Mist Flow Based on Droplet Fractal Theory

    Directory of Open Access Journals (Sweden)

    Jian-Yi Liu

    2015-01-01

    Full Text Available We present a fractal model for droplet Sauter mean diameter in gas-liquid mist flow, based on the droplet fractal theory and the balance relationship between total droplet surface energy and total gas turbulent kinetic energy. The present model is expressed as functions of the droplet fractal dimension, gas superficial velocity, liquid superficial velocity, and other fluid characteristics. Agreement between the present model predictions and experimental measurements is obtained. Results verify the reliability of the present model.

  6. Structural study and preliminary biological evaluation on the collagen hydrogel crosslinked by γ-irradiation.

    Science.gov (United States)

    Zhang, Xiangmei; Xu, Ling; Huang, Xin; Wei, Shicheng; Zhai, Maolin

    2012-11-01

    Under γ-irradiation, concentrated collagen solutions yielded collagen hydrogels and liquid products. The molecular structure of collagen hydrogels and the source of the liquid products were studied. Furthermore, preliminary biological properties of the hydrogels were investigated. The results revealed that crosslinking occurred to form collagen hydrogel and the crosslinking density increased with the increasing of the absorbed dose, and the collagen hydrogels showed enhanced mechanical properties. Meanwhile, collagen underwent radiation degradation and water was squeezed out from hydrogel by contraction of hydrogel, yielding liquid products. Collagen hydrogels induced by γ-irradiation maintained the backbone structure of collagen, and tyrosine partially involved in crosslinking. The irradiated collagen hydrogels have higher denatured temperature, can promote fibroblasts proliferation, and their degradation rate in vivo depended on the absorbed dose. The comprehensive results suggested that the collagen hydrogels prepared by radiation crosslinking preserved the triple helical conformation, possessed improved thermal stability and mechanical properties, excellent biocompatibility, which is expected to favor its application as biomaterials.

  7. Fabrication of Negative Charged Poly (Ethylene glycol)-diacrylate Hydrogel as a Bone Tissue Engineering scaffold

    Institute of Scientific and Technical Information of China (English)

    WANG Ya-qi; LIU Jie; TAN Fei; XIE Wei

    2016-01-01

    Objective To improve the cell attachment of PEGDA hydrogel, the SMAS small molecule was used to modify the PEGDA hydrogel. The charged hydrogel would show improved cell attachment and enhanced protein adsorption caused by enhancement of electrostatic adsorption.Method In this study, a series of charged hydrogels were produced by adding different concentrations of charged small molecule monomer into the PEGDA solution. Then, we investigate the physicochemical and biological characteristics of charged hydrogels, including FTIR, swelling ratio, contact angle, cell attachment.Result The results indicate that the charged monomer had been successfully incorporated into PEGDA hydrogel. Meanwhile, the protein adsorption of the hydrogel increased with increasing concentration of charge modification. Moreover, compared to PEGDA hydrogel, the cell attachment significantly improved on the charged hydrogel.Conclusion The charged hydrogel would be a promising scaffold candidate for bone tissue engineering.

  8. Reflectivity of NaK Droplets

    Science.gov (United States)

    Wiedemann, C.; Oswald, M.; Stabroth, S.; Klinkrad, H.; Vörsmann, P.

    An important contribution to the space debris population near 900 km orbital altitude are the NaK droplets. Sixteen nuclear powered satellites of the type RORSAT launched between 1980 and 1988 activated a reactor core ejection system close to this altitude. The core ejection causes an opening of the primary coolant circuit. The liquid coolant has been released into space during these core ejections, forming droplets up to a diameter of 5.5 cm. These droplets consist of an alloy of two alkali metals, sodium and potassium (NaK). In this paper the monochromatic and the total reflectivity of NaK is calculated using theoretical models. The reflectivity depends on the alloy composition and temperature of a droplet. The alloy composition may change due to evaporation, resulting in an enrichment of sodium especially at the droplet surface. According to the literature, there is only a limited number of available measurement data concerning the optical properties of NaK alloys. Furthermore the published data for pure sodium and potassium are controversial. Thus it is necessary to investigate the optical properties of alkali metals and their alloys. Mainly two types of optical absorption, the intraband and the interband absorption, are considered. The intraband absorption is calculated using the Drude-model which uses electrical properties to derive the optical constants of pure metals or alloys. Drude assumes that the valence electrons can be treated as free electrons. The electrons behave like an ideal gas of uncharged particles. The theory of free electrons is a very simple model for the description of the valence electrons in metals. This assumption is sufficient for alkali metals, because they show a nearly free electron behavior. For the interband absorption the classical Butcher-model is used. Furthermore an absorption anomaly which has been observed in some alkali metals is discussed. Especially for potassium, some measurements revealed an unexpected absorption in the

  9. Kinetics of Iododeoxyuridine release from sodium alginate hydrogel in vitro

    Institute of Scientific and Technical Information of China (English)

    XU Yong-hua; Mandar R Jagtap; ZHANG Dian-bo; YING Jun; Ronald C McGarry; Marc S. Mendonca; Gordon McLennan

    2006-01-01

    Objective To investigate the kinetics of Iododeoxyuridine (IUdR)release from sodium alginate hydrogel cross-linked with varying amounts of calcium chloride, and to optimize sustained release for further periadventitial I125-labeled IUdR delivery to suppress intimal hyperplasia following angioplasty in vivo.Methods Four hydrogels,composed of 0.16 mEq sodium alginate and 200 g IUdR, were cross-linked with calcium chloride to yield ion equivalence (IE) ratios (Calcium: alginate) of 3:1, 4:1, 5:1, or 6:1. 2 ml of normal saline was placed on top of each hydrogel and allowed to remain in contact at 37℃ for up to 30 days. At set time intervals, the concentration and amount of IUdR in the eluate were assayed by high performance liquid chromatography using UV detection and Water symmetry C18 column. The data for accumulated release rate and concentration in the eluate were calculated based on the calibration curve of peak area versus IUdR concentration. The hydrogel morphologic degradations were also observed. Results The hydrogels entrapped 92.9%, 98.6%, 98.4% and 98.6% of the IUdR with 3:1, 4:1, 5:1 and 6:1 IE ratios, respectively. IUdR concentration in eluates from 3:1 IE ratio hydrogel decreased faster than that from other hydrogels over time (P < 0.01). The 4:1, 5:1 and 6:1 IE ratio hydrogels produced more than 10 μm IUdR concentrations in eluates for the first 8 days, while the 3:1 IE ratio hydrogel for 4 days. IUdR release rates of the 4:1, 5:1 and 6:1 IE ratio hydrogels were very close, however they were lower than that of the 3:1 IE hydrogel in the first 48 hours (P < 0.05). At day 30, the 3:1 and 4:1 IE ratio hydrogels had 100% and 88% degradation, but no significant degradation was observed in the other hydrogels. Conclusion The sodium alginate hydrogel with 4:1 IE ratio exhibited an optimal IUdR sustained release and almost complete degradation in 30 days. (J Intervent Radiol,2006 , 15: 293-298)

  10. Extracellular matrix hydrogels from decellularized tissues: Structure and function.

    Science.gov (United States)

    Saldin, Lindsey T; Cramer, Madeline C; Velankar, Sachin S; White, Lisa J; Badylak, Stephen F

    2017-02-01

    Extracellular matrix (ECM) bioscaffolds prepared from decellularized tissues have been used to facilitate constructive and functional tissue remodeling in a variety of clinical applications. The discovery that these ECM materials could be solubilized and subsequently manipulated to form hydrogels expanded their potential in vitro and in vivo utility; i.e. as culture substrates comparable to collagen or Matrigel, and as injectable materials that fill irregularly-shaped defects. The mechanisms by which ECM hydrogels direct cell behavior and influence remodeling outcomes are only partially understood, but likely include structural and biological signals retained from the native source tissue. The present review describes the utility, formation, and physical and biological characterization of ECM hydrogels. Two examples of clinical application are presented to demonstrate in vivo utility of ECM hydrogels in different organ systems. Finally, new research directions and clinical translation of ECM hydrogels are discussed.

  11. Radiation-chemical preparation of poly(vinyl alcohol) hydrogels

    Science.gov (United States)

    Duflot, Anastasia V.; Kitaeva, Natalia K.; Duflot, Vladimir R.

    2015-02-01

    This work reports the usage of method of radiation-chemical synthesis to prepare cross-linked hydrogels from poly(vinyl alcohol) modified with glycidyl methacrylate. Synthesis kinetics of modified poly(vinyl alcohol) and properties of hydrogels were studied. The gel fraction, swelling, mechanical properties, and water content of the hydrogels were measured. It was found that gel fraction increases with increasing radiation dose, concentration of modified poly(vinyl alcohol), and reaches 60%. It was established by differential scanning calorimetry that a fraction of the "bound" water in hydrogels is 50-70% and independent of gel fraction content. In addition to "bound" and "free" states, water in hydrogels is also present in the intermediate state.

  12. Removal of toxic metal ions with magnetic hydrogels.

    Science.gov (United States)

    Ozay, Ozgur; Ekici, Sema; Baran, Yakup; Aktas, Nahit; Sahiner, Nurettin

    2009-09-01

    Hydrogels, based on 2-acrylamido-2-methyl-1-propansulfonic acid (AMPS) were synthesized via photopolymerization technique and used for the preparation of magnetic responsive composite hydrogels. These composite hydrogels with magnetic properties were further utilized for the removal of toxic metal ions such as Cd(II), Co(II), Fe(II), Pb(II), Ni(II), Cu(II) and Cr(III) from aqueous environments. It was revealed that hydrogel networks with magnetic properties can effectively be utilized in the removal of pollutants. The results verified that magnetic iron particle containing p(AMPS) hydrogel networks provide advantageous over conventional techniques. Langmuir and Freundlich adsorption isotherms were applied for toxic metal removal and both isotherms were fit reasonably well for the metal ion absorptions.

  13. Engineered Polymeric Hydrogels for 3D Tissue Models

    Directory of Open Access Journals (Sweden)

    Sujin Park

    2016-01-01

    Full Text Available Polymeric biomaterials are widely used in a wide range of biomedical applications due to their unique properties, such as biocompatibility, multi-tunability and easy fabrication. Specifically, polymeric hydrogel materials are extensively utilized as therapeutic implants and therapeutic vehicles for tissue regeneration and drug delivery systems. Recently, hydrogels have been developed as artificial cellular microenvironments because of the structural and physiological similarity to native extracellular matrices. With recent advances in hydrogel materials, many researchers are creating three-dimensional tissue models using engineered hydrogels and various cell sources, which is a promising platform for tissue regeneration, drug discovery, alternatives to animal models and the study of basic cell biology. In this review, we discuss how polymeric hydrogels are used to create engineered tissue constructs. Specifically, we focus on emerging technologies to generate advanced tissue models that precisely recapitulate complex native tissues in vivo.

  14. Advances in the Fabrication of Antimicrobial Hydrogels for Biomedical Applications

    Directory of Open Access Journals (Sweden)

    Carmen M. González-Henríquez

    2017-02-01

    Full Text Available This review describes, in an organized manner, the recent developments in the elaboration of hydrogels that possess antimicrobial activity. The fabrication of antibacterial hydrogels for biomedical applications that permits cell adhesion and proliferation still remains as an interesting challenge, in particular for tissue engineering applications. In this context, a large number of studies has been carried out in the design of hydrogels that serve as support for antimicrobial agents (nanoparticles, antibiotics, etc.. Another interesting approach is to use polymers with inherent antimicrobial activity provided by functional groups contained in their structures, such as quaternary ammonium salt or hydrogels fabricated from antimicrobial peptides (AMPs or natural polymers, such as chitosan. A summary of the different alternatives employed for this purpose is described in this review, considering their advantages and disadvantages. Finally, more recent methodologies that lead to more sophisticated hydrogels that are able to react to external stimuli are equally depicted in this review.

  15. States of Water in Hydrogels Containing with Glyceryl Methacrylate

    Institute of Scientific and Technical Information of China (English)

    LI Qin-hua; LIU Li; HUANG Zhi-rong; LIN Dong-qing

    2014-01-01

    Hydrogel materials were prepared by thermopolymerization with different content of glyceryl methacrylate and hydroxyethyl methacrylate. The different states of water in swelling hydrogels were described and studied by differential scanning calorimetry (DSC). It was found that the hydrophilicity of GMA was stronger than HEMA, the water content and bound water of GMA hydrogel are higher than HEMA hydrogel. With the increase of GMA content, the content of free water in hydrogel increased. When GMA content was lower than 50%, the increase of GMA content also increased the content of bound water; but when GMA content was higher than 50%, the increase of GMA content decreased the content of bound water, which was caused by the chain hydrogen bond formed on the GMA chain with hydroxyl group each other.

  16. Synthesis and characterization of hydrogel bonded with rare earth

    Institute of Scientific and Technical Information of China (English)

    YAN Changhao; JIAO Lianlian; GUO Chunfang; ZHANG Ming; QIU Guanming

    2008-01-01

    Chitosan-poly(acrylic acid) hydrogel bonded with Eu3+ was prepared by radical solution polymerization. Biodegradable chitosan,N,N'-methylen-diacrylamide, and potassium persulphate were used as the basic material, cross-linking agent, and initiator, respectively. The structure and thermal property of hydrogel were characterized by infrared spectrometry, X-ray diffraction, scanning electron microscopy, and differential scanning calorimetry. The swollen property and fluorescent performance were also characterized. The results showed that the rare earth presented unique distribution in the hydrogel due to the formation of chemical bonds after polymerization. The glass transition tem-perature of the hydrogel decreased remarkably, which might broaden the range of its elastic application considerably. Moreover, the charac-teristic fluorescent emission of Eu3+ was observed in the hydrogel, which was indicative of the excellent luminescent performance.

  17. Engineering three-dimensional cell mechanical microenvironment with hydrogels.

    Science.gov (United States)

    Huang, Guoyou; Wang, Lin; Wang, Shuqi; Han, Yulong; Wu, Jinhui; Zhang, Qiancheng; Xu, Feng; Lu, Tian Jian

    2012-12-01

    Cell mechanical microenvironment (CMM) significantly affects cell behaviors such as spreading, migration, proliferation and differentiation. However, most studies on cell response to mechanical stimulation are based on two-dimensional (2D) planar substrates, which cannot mimic native three-dimensional (3D) CMM. Accumulating evidence has shown that there is a significant difference in cell behavior in 2D and 3D microenvironments. Among the materials used for engineering 3D CMM, hydrogels have gained increasing attention due to their tunable properties (e.g. chemical and mechanical properties). In this paper, we provide an overview of recent advances in engineering hydrogel-based 3D CMM. Effects of mechanical cues (e.g. hydrogel stiffness and externally induced stress/strain in hydrogels) on cell behaviors are described. A variety of approaches to load mechanical stimuli in 3D hydrogel-based constructs are also discussed.

  18. Chitosan Hydrogel in combination with Nerolidol for healing wounds.

    Science.gov (United States)

    Ferreira, Maria Onaira Gonçalves; Leite, Layara Lorrana Ribeiro; de Lima, Idglan Sá; Barreto, Humberto Medeiros; Nunes, Lívio César Cunha; Ribeiro, Alessandra Braga; Osajima, Josy Anteveli; da Silva Filho, Edson Cavalcanti

    2016-11-01

    Chitosan is a natural polymer with antibacterial property, that is biodegradable, extremely abundant and non-toxic. This study aimed to develop and characterize chitosan hydrogels in combination with nerolidol, in order to optimize the antimicrobial and healing properties. The hydrogels were prepared using a reaction of the chitosan with acetic acid solution, followed by the addition of 2 or 4% of the nerolidol. Using thermogravimetry, differential scanning calorimetry and infrared spectroscopy, the incorporation of nerolidol in the hydrogel was confirmed. Direct contact tests using hydrogels and Staphylococcus aureus showed a synergistic effect in the materials, enabling total inhibition of bacterial growth. The hydrogel containing 2% nerolidol showed excellent healing effects. The beginning of re-epithelialization and reorganization of collagen was already observed on the 7th day of treatment. The material created proofed to be promising as a healing and antibacterial agent.

  19. Development of sago starch hydrogel for wound dressing

    Energy Technology Data Exchange (ETDEWEB)

    Kamaruddin Hashim; Khairul Zaman HJ. Mohd Dahlan; Kamarudin Bahari [Malaysian Institute for Nuclear Technology Research (MINT), Bangi (Malaysia); Yoshii, Fumio; Kume, Tamikazu [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment

    2001-03-01

    Sago starch is utilized in Malaysia mainly for food production. The purpose of the research is to diversify the use of sago starch for medical application particularly in development of hydrogel burn wound dressing. The sago starch is blending with mixture of PVP and PVA to improve the degree of crosslink, mechanical properties, swelling ability and tackiness of the blend hydrogel (sago/PVA and sago PVP). Additives have been introduced into the system such as, polypropylene glycol or carboxymethyl cellulose to improved further the swelling ability and tackiness properties of the blend hydrogel as well as other properties. Effect of irradiation dose on the blend hydrogel has also been studied to optimize the effective dose for blend hydrogel and simultaneously for sterilization purpose. (author)

  20. Thermoresponsive hydrogels in biomedical applications: A seven-year update.

    Science.gov (United States)

    Klouda, Leda

    2015-11-01

    Thermally responsive hydrogels modulate their gelation behavior upon temperature change. Aqueous solutions solidify into hydrogels when a critical temperature is reached. In biomedical applications, the change from ambient temperature to physiological temperature can be employed. Their potential as in situ forming biomaterials has rendered these hydrogels very attractive. Advances in drug delivery, tissue engineering and cell sheet engineering have been made in recent years with the use of thermoresponsive hydrogels. The scope of this article is to review the literature on thermosensitive hydrogels published over the past seven years. The article concentrates on natural polymers as well as synthetic polymers, including systems based on N-isopropylacrylamide (NIPAAm), poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (PEO-PPO-PEO), poly(ethylene glycol) (PEG)-biodegradable polyester copolymers, poly(organophosphazenes) and 2-(dimethylamino) ethyl methacrylate (DMAEMA).

  1. Classification, processing and application of hydrogels: A review.

    Science.gov (United States)

    Ullah, Faheem; Othman, Muhammad Bisyrul Hafi; Javed, Fatima; Ahmad, Zulkifli; Md Akil, Hazizan

    2015-12-01

    This article aims to review the literature concerning the choice of selectivity for hydrogels based on classification, application and processing. Super porous hydrogels (SPHs) and superabsorbent polymers (SAPs) represent an innovative category of recent generation highlighted as an ideal mould system for the study of solution-dependent phenomena. Hydrogels, also termed as smart and/or hungry networks, are currently subject of considerable scientific research due to their potential in hi-tech applications in the biomedical, pharmaceutical, biotechnology, bioseparation, biosensor, agriculture, oil recovery and cosmetics fields. Smart hydrogels display a significant physiochemical change in response to small changes in the surroundings. However, such changes are reversible; therefore, the hydrogels are capable of returning to its initial state after a reaction as soon as the trigger is removed.

  2. Preparation and characterization of bioglass/polyvinyl alcohol composite hydrogel

    Energy Technology Data Exchange (ETDEWEB)

    Xu Hong [College of Materials Science and Engineering, South China University of Technology, Guangzhou 510641 (China); Wang Yingjun [College of Materials Science and Engineering, South China University of Technology, Guangzhou 510641 (China); Zheng Yudong [College of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083 (China); Chen Xiaofeng [College of Materials Science and Engineering, South China University of Technology, Guangzhou 510641 (China); Ren Li [College of Materials Science and Engineering, South China University of Technology, Guangzhou 510641 (China); Wu Gang [College of Materials Science and Engineering, South China University of Technology, Guangzhou 510641 (China); Huang Xiaoshan [College of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083 (China)

    2007-06-01

    In order to form firm active fixation with the adjacent bone, a new kind of bioactive composite hydrogel was prepared with polyvinyl alcohol (PVA) and bioglass (BG) through ultrasonic dispersion, heat-high-pressure and freeze/thawed technique. A digital speckle correlation method (DSCM) was utilized to characterize the mechanical properties of the series of BG/PVA composites. Results showed that at different load pressures, the composite hydrogel displayed different displacement and deformation in the V field. Results also showed that an increase of PVA percentage (15-30 wt%) or of bioglass percentage (2-10 wt%) in composite hydrogel could lead to an increase in the elastic compression modulus. Scanning electron microscope results indicated that bioglass was uniformly dispersed in the BG/PVA composite hydrogel. The BG/PVA composite hydrogel shows a promising prospect as a new bionic cartilage implantation material.

  3. An interface tracking model for droplet electrocoalescence.

    Energy Technology Data Exchange (ETDEWEB)

    Erickson, Lindsay Crowl

    2013-09-01

    This report describes an Early Career Laboratory Directed Research and Development (LDRD) project to develop an interface tracking model for droplet electrocoalescence. Many fluid-based technologies rely on electrical fields to control the motion of droplets, e.g. microfluidic devices for high-speed droplet sorting, solution separation for chemical detectors, and purification of biodiesel fuel. Precise control over droplets is crucial to these applications. However, electric fields can induce complex and unpredictable fluid dynamics. Recent experiments (Ristenpart et al. 2009) have demonstrated that oppositely charged droplets bounce rather than coalesce in the presence of strong electric fields. A transient aqueous bridge forms between approaching drops prior to pinch-off. This observation applies to many types of fluids, but neither theory nor experiments have been able to offer a satisfactory explanation. Analytic hydrodynamic approximations for interfaces become invalid near coalescence, and therefore detailed numerical simulations are necessary. This is a computationally challenging problem that involves tracking a moving interface and solving complex multi-physics and multi-scale dynamics, which are beyond the capabilities of most state-of-the-art simulations. An interface-tracking model for electro-coalescence can provide a new perspective to a variety of applications in which interfacial physics are coupled with electrodynamics, including electro-osmosis, fabrication of microelectronics, fuel atomization, oil dehydration, nuclear waste reprocessing and solution separation for chemical detectors. We present a conformal decomposition finite element (CDFEM) interface-tracking method for the electrohydrodynamics of two-phase flow to demonstrate electro-coalescence. CDFEM is a sharp interface method that decomposes elements along fluid-fluid boundaries and uses a level set function to represent the interface.

  4. Investigations of Abrupt Movements of Optically Trapped Water Droplets

    Science.gov (United States)

    Murphy, Shawntel; McCann, Lowell I.

    2007-03-01

    We have used a single beam optical trap (optical tweezers) to capture individual water droplets in air. A 3-dimensional viewing system consisting of a two axis microscope allows the trapped droplet to be viewed from the top and the side simultaneously. The position of the droplet is determined with a digital camera at a rate up to 700Hz. We have observed abrupt movements along the beam in two situations: As a pure water droplet evaporates, the movements occur at specific size intervals as the diameter decreases. For non-evaporating saltwater droplets the movements rapidly occur for certain ranges of beam power, and not at all for other ranges of power.

  5. A soft microchannel decreases polydispersity of droplet generation.

    Science.gov (United States)

    Pang, Yan; Kim, Hyoungsoo; Liu, Zhaomiao; Stone, Howard A

    2014-10-21

    We study the effect of softness of the microchannel on the process of droplet generation in two-phase flows in a T-junction microchannel. One side of the microchannel has a flexible thin PDMS layer, which vibrates naturally while droplets are generated; the deformation frequency coincides with the frequency of droplet formation. Furthermore, we compare the polydispersity of water-in-oil droplets formed with a microchannel with one soft wall with those formed in a conventional rigid microchannel. We show that deformation of the soft wall reduces the polydispersity in the droplet size.

  6. Photophoretic trampoline - Interaction of single airborne absorbing droplets with light

    CERN Document Server

    Esseling, Michael; Alpmann, Christina; Denz, Cornelia

    2012-01-01

    We present the light-induced manipulation of absorbing liquid droplets in air. Ink droplets from a printer cartridge are used to demonstrate that absorbing liquids - just like their solid counterparts - can interact with regions of high light intensity due to the photophoretic force. It is shown that droplets follow a quasi-ballistic trajectory after bouncing off a high intensity light sheet. We estimate the intensities necessary for this rebound of airborne droplets and change the droplet trajectories through a variation of the manipulating light field.

  7. Influence of Liquid Viscosity on Droplet Impingement on Superhydrophobic Surfaces

    CERN Document Server

    Pearson, John T; Webb, Brent W

    2010-01-01

    This fluid dynamics video describes droplet impingement experiments performed on superhydrophobic surfaces. When droplets of pure water are impinged upon superhydrophobic surfaces, a region of thin coherent jets are observed for Weber numbers between 5 and 15. Also, peripheral splashing is observed for Weber numbers above about 200. When the viscosity of the droplet is increased by mixing glycerol with the water, the thin jets are not observed and peripheral splashing is delayed somewhat. In the Weber number range where pure water droplets are observed to splash peripherally, the water/glycerol droplets are observed to have two-pronged jets.

  8. Stearate organogel-gelatin hydrogel based bigels: physicochemical, thermal, mechanical characterizations and in vitro drug delivery applications.

    Science.gov (United States)

    Sagiri, Sai Sateesh; Singh, Vinay K; Kulanthaivel, Senthilguru; Banerjee, Indranil; Basak, Piyali; Battachrya, M K; Pal, Kunal

    2015-03-01

    Over the past decade, researchers have been trying to develop alternative gel based formulations in comparison to the traditional hydrogels and emulgels. In this perspective, bigels were synthesized by mixing gelatin hydrogel and stearic acid based organogel by hot emulsification method. Two types of bigels were synthesized using sesame oil and soy bean oil based stearate organogels. Gelatin based emulgels prepared using sesame oil and soy bean oil were used as the controls. Microscopic studies revealed that the bigels contained aggregates of droplets, whereas, emulgels showed dispersed droplets within the continuum phase. The emulgels showed higher amount of leaching of oils, whereas, the leaching of the internal phase was negligible from the bigels. Presence of organogel matrix within the bigels was confirmed by XRD, FTIR and DSC methods. Bigels showed higher mucoadhesive and mechanical properties compared to emulgels. Cyclic creep-recovery and stress relaxation studies confirmed the viscoelastic nature of the formulations. Four elemental Burger's model was employed to analyze the cyclic creep-recovery data. Cyclic creep-recovery studies suggested that the deformation of the bigels were lower due to the presence of the organogels within its structure. The formulations showed almost 100% recovery after the creep stage and can be explained by the higher elastic nature of the formulations. Stress relaxation study showed that the relaxation time was higher in the emulgels as compared to the bigels. Also, the % relaxation was higher in emulgels suggesting its fluid dominant nature. The in vitro biocompatibility of the bigels was checked using human epidermal keratinocyte cell line (HaCaT). Both emulgels and bigels were biocompatible in nature. The in vitro drug (ciprofloxacin) release behavior indicated non-Fickian diffusion of the drug from the matrices. The drug release showed good antimicrobial effect against Escherichia coli. Based on the results, it was concluded

  9. Hydrogel design of experiments methodology to optimize hydrogel for iPSC-NPC culture.

    Science.gov (United States)

    Lam, Jonathan; Carmichael, S Thomas; Lowry, William E; Segura, Tatiana

    2015-03-11

    Bioactive signals can be incorporated in hydrogels to direct encapsulated cell behavior. Design of experiments methodology methodically varies the signals systematically to determine the individual and combinatorial effects of each factor on cell activity. Using this approach enables the optimization of three ligands concentrations (RGD, YIGSR, IKVAV) for the survival and differentiation of neural progenitor cells.

  10. Electric-Field-Enhanced Jumping-Droplet Condensation

    Science.gov (United States)

    Miljkovic, Nenad; Preston, Daniel; Enright, Ryan; Limia, Alexander; Wang, Evelyn

    2013-11-01

    When condensed droplets coalesce on a superhydrophobic surface, the resulting droplet can jump due to the conversion of surface energy into kinetic energy. This frequent out-of-plane droplet jumping has the potential to enhance condensation heat and mass transfer. In this work, we demonstrated that these jumping droplets accumulate positive charge that can be used to further increase condensation heat transfer via electric fields. We studied droplet jumping dynamics on silanized nanostructured copper oxide surfaces. By characterizing the droplet trajectories under various applied external electric fields (0 - 50 V/cm), we show that condensation on superhydrophobic surfaces results in a buildup of negative surface charge (OH-) due to dissociated water ion adsorption on the superhydrophobic coating. Consequently, the opposite charge (H3O +) accumulates on the coalesced jumping droplet. Using this knowledge, we demonstrate electric-field-enhanced jumping droplet condensation whereby an external electric field opposes the droplet vapor flow entrainment towards the condensing surface to increase the droplet removal rate and overall surface heat transfer by 100% when compared to state-of-the-art dropwise condensing surfaces. This work not only shows significant condensation heat transfer enhancement through the passive charging of condensed droplets, but promises a low cost approach to increase efficiency for applications such as atmospheric water harvesting and dehumidification.

  11. Modeling of sea spray droplets in the ocean

    Directory of Open Access Journals (Sweden)

    Zhu Jian-Bin

    2014-01-01

    Full Text Available Droplets are known to play an important role in momentum, heat, and moisture transfer between the ocean and atmosphere. A lot of scholars and experts aim to investigate the effects of droplets on the climate and make precise forecast for hurricane conditions. So the profiles of droplets concentration at different heights above the sea surface are important. For a better study of the momentum and energy transport among the boundary layer, we also need to know the distribution of droplets with different radii. After wave break, with the coupled effects of inertia, gravity, wind updraught, and turbulent mixing, droplets can be transported to certain heights above the sea surface. In the present study, we develop a modified subgrid-scale flow field model coupled with the large eddy simulation to investigate the profiles of spay droplets concentration after wave break. The results in our simulation show that, the distribution of the droplets with the same radii in vertical direction is roughly Gaussian distribution, and the maximum appears at the height nearly above the significant wave height. For different radii, the concentration of droplets with larger radii can be higher than that of the smaller ones at some heights. Since the droplets in our model only include the spay droplets generated by wave break, the data will not be identical with the measurement in the open ocean and laboratory, which include all the kinds of droplets above the ocean.

  12. Vibration-Induced Droplet Atomization --- An Experimental Investigation.

    Science.gov (United States)

    Vukasinovic, Bojan; Smith, Marc K.; Glezer, Ari

    1997-11-01

    The atomization of a liquid droplet placed on a vibrating membrane starts with the development of Faraday free surface waves. As the excitation amplitude increases, the waves grow in amplitude and ultimately begin to eject smaller secondary droplets from the wave crests. The rate of droplet ejection can be large enough to completely drain the primary droplet, an event we call bursting. The evolution of the droplet ejection process depends on a coupled system dynamic between the droplet and the membrane. When droplets are ejected the resonant frequency of the system increases. This changes the acceleration felt by the droplet and, in turn, the rate of droplet ejection. Depending on the excitation frequency and amplitude, various types of bursting or droplet ejection processes may occur. In the present experiments, the high acceleration needed to attain ejection (typically 300g) is achieved by driving a light-weight membrane near its resonant frequency (nominally 1000 Hz). The resonant characteristics and the acceleration during the ejection process for various droplet sizes and excitation amplitudes are investigated using a surface-mounted microfabricated accelerometer and a laboratory computer system.

  13. Hydrodynamics of Leidenfrost droplets in one-component fluids

    KAUST Repository

    Xu, Xinpeng

    2013-04-24

    Using the dynamic van der Waals theory [Phys. Rev. E 75, 036304 (2007)], we numerically investigate the hydrodynamics of Leidenfrost droplets under gravity in two dimensions. Some recent theoretical predictions and experimental observations are confirmed in our simulations. A Leidenfrost droplet larger than a critical size is shown to be unstable and break up into smaller droplets due to the Rayleigh-Taylor instability of the bottom surface of the droplet. Our simulations demonstrate that an evaporating Leidenfrost droplet changes continuously from a puddle to a circular droplet, with the droplet shape controlled by its size in comparison with a few characteristic length scales. The geometry of the vapor layer under the droplet is found to mainly depend on the droplet size and is nearly independent of the substrate temperature, as reported in a recent experimental study [Phys. Rev. Lett. 109, 074301 (2012)]. Finally, our simulations demonstrate that a Leidenfrost droplet smaller than a characteristic size takes off from the hot substrate because the levitating force due to evaporation can no longer be balanced by the weight of the droplet, as observed in a recent experimental study [Phys. Rev. Lett. 109, 034501 (2012)].

  14. Stick-jump mode in surface droplet dissolution

    CERN Document Server

    Dietrich, Erik; Zhang, Xuehua; Zandvliet, Harold J W; Lohse, Detlef

    2016-01-01

    The analogy between evaporating surface droplets in air to dissolving long-chain alcohol droplets in water is worked out. We show that next to the three known modi for surface droplet evaporation or dissolution (constant contact angle mode, constant contact radius mode, and stick-slide mode), a fourth mode exists for small droplets on supposedly smooth substrates, namely the stick-jump mode: intermittent contact line pinning causes the droplet to switch between sticking and jumping during the dissolution. We present experimental data and compare them to theory to predict the dissolution time in this stick-jump mode. We also explain why these jumps were easily observed for microscale droplets but not for larger droplets.

  15. Separation of Iron Droplets From Titania Bearing Slag

    Institute of Scientific and Technical Information of China (English)

    WANG Ming-yu; LOU Tai-ping; ZHANG Li; SUI Zhi-tong

    2008-01-01

    Owing to smelting vanadium-titanium magnetite ore, the amount of iron entrainment in slag as droplets is far higher than that in conventional BF slag. However, the iron droplets can be easily settled by blowing air into the molten slag. The results show that more than 80% of iron droplets in titania bearing slag can be settled and separated after treatment. The temperature rise of molten slag during the oxidizing process and the decreased viscosity caused by the component change of slag as well as air stirring in slag both accelerate the iron droplets settling. The vanadium content in the settled iron droplets and the original iron droplets was obtained by chemical analysis. The possible reason for the increased vanadium in the settled iron droplets was discussed by thermodynamic principles.

  16. Structure formation by nanosilica particles suspended in levitated droplet

    CERN Document Server

    Saha, Abhishek; Kumar, Ranganathan; Basu, Saptarshi

    2010-01-01

    Vaporization of liquid droplets containing particles has been studied extensively for its applications in combustion, thermal coating, ink-jet printing, spray cooling, drug delivery, and surface patterning. Droplets containing solid particles show a preferential solute-migration during drying process. Recently we carried out experiments with vaporizing droplet suspended in an acoustic levitator. In this work, we present detailed study of a laser irradiated droplet containing nanosilica particles. Infrared and High speed imaging of the heating process for different concentrations of nanosilica revealed an interesting solute migration pattern. Further investigation with Particle Image Velocimetry shows presence of strong recirculation within the levitated droplet. It also reveals that with increasing viscosity of the liquid the strength of this recirculation decreases. Due to the droplets rotation about the levitator axis, a centrifugal force also dominated the flow field within the droplet. High speed imaging ...

  17. Magnetohydrodynamic actuation of droplets for millimetric planar fluidic systems

    Energy Technology Data Exchange (ETDEWEB)

    Ahmadi, A., E-mail: ali.ahmadi@ubc.ca; McDermid, C. M.; Markley, L. [School of Engineering, University of British Columbia, Kelowna, British Columbia V1V 1V7 (Canada)

    2016-01-04

    In this work, a magnetohydrodynamic method is proposed for the actuation of droplets in small-scale planar fluidic systems, providing an alternative to commonly used methods such as electrowetting-on-dielectric. Elementary droplet-based operations, including transport, merging, and mixing, are demonstrated. The forces acting on millimetric droplets are carefully investigated, with a primary focus on the magnetic actuation force and on the unbalanced capillary forces that arise due to hysteresis. A super-hydrophobic channel is 3D printed to guide the droplets, with thin wires installed as contact electrodes and permanent magnets providing a static magnetic field. It is shown that droplet motion is enhanced by increasing the droplet size and minimizing the electrode contact surface. The effects of channel geometry on threshold voltage and minimum moveable droplet volume are characterized. Finally, the presence of electrolysis is investigated and mitigating strategies are discussed.

  18. Evaporation dynamics of water droplets on inclined surfaces

    Science.gov (United States)

    Kim, Jin Young; Hwang, In Gyu; Weon, Byung Mook

    2016-11-01

    When a water droplet is gently placed on a flat substrate, particularly which is tilted at an inclined angle, usually there are advancing and receding angles inside the droplet formed by inclination under gravitational force. Evaporation dynamics of an nonspherical inclined droplet at inclinations would deviate from that of a spherical droplet. Here we study on evaporation dynamics rates of inclined droplets by measuring mass changes with time and their lifetimes. We find that the lifetime of an evaporating inclined droplets becomes longer as the gravitational influence becomes stronger. The lifetime depends on the pinning-depinning transitions and the depinning onset times, which are changed by the gravitational influence. This The dependence inclination-induced evaporation behavior would be useful important in understanding evaporation dynamics of inclined droplets. This research was supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (NRF-2016R1D1A1B01007133).

  19. Impact of Droplets on Inclined Flowing Liquid Films

    CERN Document Server

    Che, Zhizhao; Matar, Omar K

    2015-01-01

    The impact of droplets on an inclined falling liquid film is studied experimentally using high-speed imaging. The falling film is created on a flat substrate with controllable thicknesses and flow rates. Droplets with different sizes and speeds are used to study the impact process under various Ohnesorge and Weber numbers, and film Reynolds numbers. A number of phenomena associated with droplet impact are identified and analysed, such as bouncing, partial coalescence, total coalescence, and splashing. The effects of droplet size, speed, as well the film flow rate are studied culminating in the generation of an impact regime map. The analysis of the lubrication force acted on the droplet via the gas layer shows that a higher flow rate in the liquid film produces a larger lubrication force, slows down the drainage process, and increases the probability of droplet bouncing. Our results demonstrate that the flowing film has a profound effect on the droplet impact process and associated phenomena, which are marked...

  20. Effective doping of low energy ions into superfluid helium droplets

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Jie; Chen, Lei; Freund, William M.; Kong, Wei, E-mail: wei.kong@oregonstate.edu [Department of Chemistry, Oregon State University, Corvallis, Oregon 97331 (United States)

    2015-08-21

    We report a facile method of doping cations from an electrospray ionization (ESI) source into superfluid helium droplets. By decelerating and stopping the ion pulse of reserpine and substance P from an ESI source in the path of the droplet beam, about 10{sup 4} ion-doped droplets (one ion per droplet) can be recorded, corresponding to a pickup efficiency of nearly 1 out of 1000 ions. We attribute the success of this simple approach to the long residence time of the cations in the droplet beam. The resulting size of the doped droplets, on the order of 10{sup 5}/droplet, is measured using deflection and retardation methods. Our method does not require an ion trap in the doping region, which significantly simplifies the experimental setup and procedure for future spectroscopic and diffraction studies.

  1. Effect of slip on circulation inside a droplet

    CERN Document Server

    Thalakkottor, Joseph J

    2013-01-01

    Internal recirculation in a moving droplet plays an important role in several droplet-based microfluidic devices as it enhances mixing, chemical reaction and heat transfer. The occurrence of fluid slip at the wall, which becomes prominent at high shear rates and lower length scales, results in a significant change in droplet circulation. Using molecular dynamics (MD) simulations, the presence of circulation in droplets is demonstrated and quantified. Circulation is shown to vary inversely with slip length, which is a measure of interface wettability. A simple circulation model is established that captures the effect of slip on droplet circulation. Scaling parameters for circulation and slip length are identified from the circulation model which leads to the collapse of data for droplets with varying aspect ratio (AR) and slip length. The model is validated using continuum and MD simulations and is shown to be accurate for droplets with high AR.

  2. Image-based analysis of droplets in microfluidics.

    Science.gov (United States)

    Zantow, Miné; Dendere, Ronald; Douglas, Tania S

    2013-01-01

    In order to design a microfluidic device that can produce monodispersed encapsulated enzymes as droplets, it is essential to be able to evaluate the system during its development. An automated method to determine the size of the droplets as well as a method to tag and track droplets as they move in the system is desirable for system evaluation. We apply the Hough transform for circles to determine droplet size. Most of the droplets in the images are detected, and the best results are obtained at 20x magnification. We also test the ability of the ImageJ 'particle tracker' plugin to determine the behaviour of the droplets as they move in microfluidic systems. It is effective in tracking droplets that travel less than 50 pixels between frames.

  3. Non-equilibrium solidification of undercooled droplets during atomization process

    Indian Academy of Sciences (India)

    Prashant Shukla; R K Mandal; S N Ojha

    2001-10-01

    Thermal history of droplets associated with gas atomization of melt has been investigated. A mathematical model, based on classical theory of heterogeneous nucleation and volume separation of nucleants among droplets size distribution, is described to predict undercooling of droplets. Newtonian heat flow condition coupled with velocity dependent heat transfer coefficient is used to obtain cooling rate before and after nucleation of droplets. The results indicate that temperature profile of droplets in the spray during recalescence, segregated and eutectic solidification regimes is dependent on their size and related undercooling. The interface temperature during solidification of undercooled droplets rapidly approaches the liquidus temperature of the alloy with a subsequent decrease in solid–liquid interface velocity. A comparison in cooling rates of atomized powder particles estimated from secondary dendrite arm spacing measurements are observed to be closer to those predicted from the model during segregated solidification regime of large size droplets.

  4. Sorting and Manipulation of Magnetic Droplets in Continuous Flow

    Science.gov (United States)

    Al-Hetlani, Entesar; Hatt, Oliver J.; Vojtíšek, Martin; Tarn, Mark D.; Iles, Alexander; Pamme, Nicole

    2010-12-01

    We report the rapid on-chip generation and subsequent manipulation of magnetic droplets in continuous flow. Magnetic droplets were formed using aqueous-based ferrofluid as the dispersed phase and fluorocarbon oil as the continuous phase. Droplet manipulation was demonstrated with simple permanent magnets using two microfluidic platforms: (i) flow focusing droplet generation followed by their splitting into daughter droplets containing different amounts of magnetic nanoparticles, and (ii) droplet generation at a T-junction and their downstream deflection across a chamber for sorting based on the applied magnetic field and magnetite loading of the droplet. Both systems show great potential for performing a wide range of high throughput continuous flow processes including sample dilution, cell sorting and screening, and microparticle fabrication.

  5. Global rainbow refractometry for droplet temperature measurement

    Energy Technology Data Exchange (ETDEWEB)

    Pascal Lemaitre; Emmanuel Porcheron; Amandine Nuboer; Philippe Brun; Pierre Cornet; Jeanne Malet; Jacques Vendel; Laurent Bouilloux [Institut de Radioprotection et de Surete Nucleaire DSU/SERAC, BP 68, 91192 Gif-sur-Yvette Cedex (France); Gerard Grehan [UMR 6614 CORIA, Laboratoire d' Electromagnetisme et Systemes Particulaires Site Universitaire du Madrillet, Avenue de l' universite BP 12, 76 801 Saint Etienne du Rouvray Cedex, (France)

    2005-07-01

    Full text of publication follows: In order to establish an accurate database to characterize the heat and mass transfers between a spray and the atmosphere with thermal-hydraulic conditions representative of a hypothetical nuclear reactor accident in the containment enclosure of a pressurized water reactor (PWR), the French Institut de Radioprotection et de Surete Nucleaire (IRSN) has developed the TOSQAN experimental facility. This experiment is highly instrumented with non-intrusive diagnostics allowing to measure droplet size and velocity and gas concentrations [1]. The aim of this work is to present the Global Rainbow Thermometry (GRT), which is an advanced non-intrusive optical diagnostic, developed to measure the mean temperature of a set of falling droplets, in a measurement volume of 1 cm{sup 3}. The final paper will be divided in three parts. In the first one, we will explain the principle of the rainbow formation and how droplet temperature can be deduced from the rainbow analysis [2]. This part will be illustrated with the theoretical background on the rainbow and numerical simulations of the global rainbow. The second part will be devoted to present the global rainbow experimental set-up we have developed on optical table, its experimental qualification and finally its implementation on the TOSQAN facility [3]. Finally, we will present the temperature measurements achieved in TOSQAN for thermal-hydraulic conditions representative of a hypothetical nuclear reactor accident. These measurements are useful to characterize the heat and mass transfers between the spraying droplets and the air-steam mixture composing the atmosphere. This analysis will be exposed in a two companion papers. References: [1] E. Porcheron, P. Brun, P. Cornet, J. Malet, J. Vendel. Optical diagnostics applied for single and multi-phase flow characterization in the TOSQAN facility dedicated for thermal hydraulic containment studies. NURETH-10 Seoul, Korea, October 5-9, 2003. [2] P

  6. Computer-aided multiple-head 3D printing system for printing of heterogeneous organ/tissue constructs

    OpenAIRE

    Jin Woo Jung; Jung-Seob Lee; Dong-Woo Cho

    2016-01-01

    Recently, much attention has focused on replacement or/and enhancement of biological tissues via the use of cell-laden hydrogel scaffolds with an architecture that mimics the tissue matrix, and with the desired three-dimensional (3D) external geometry. However, mimicking the heterogeneous tissues that most organs and tissues are formed of is challenging. Although multiple-head 3D printing systems have been proposed for fabricating heterogeneous cell-laden hydrogel scaffolds, to date only the ...

  7. Droplet-based single cell isolation microfluidic device%基于液滴微流控芯片的单细胞分离

    Institute of Scientific and Technical Information of China (English)

    洪龙烨; 郭峰; 国世上; 赵兴中

    2012-01-01

    We developed a droplet-based single cell isolation microfluidic device to collect the single cell droplets for the further single cell assays.Based on the fabrication technique of microfluidics, we designed and fabricated the PDMS chip with flow-focusing structure.We used the flow-focusing structure microfluidic device to generate alginate hydrogel droplets which contain single cell by changing flow rate of the dispersed phase and continuous phase.Then we statistically analyzed the number of encapsulated cells in these droplets.And the number of single cell droplets was less than 10% of the number of total droplets.By integrating microelectrode into the microfluidic chip and inspired by the self-charged phenomenon of the aqueous droplet, we achieved the single cell droplet isolation and enrichment using electrostatic force which was generated by the pulse of voltage in the microelectrode.%开发基于静电场力和集成微电极的微液滴操控技术以实现单细胞的分离.结合微流控技术的发展,设计并制作了以有机聚合物PDMS( polydinethylsiloxane)为材料的具有流聚焦结构的芯片,利用流聚焦结构的芯片,通过改变分散相和连续相的流速,制备包裹着悬浮癌细胞( HCT116)的海藻酸钠凝胶溶液微液滴,并对其包裹细胞数目进行统计分析,其中包裹单细胞的微液滴少于总液滴数的10%.受到液滴自带电现象的启发,通过集成微电极到微流控芯片中,利用电压脉冲产生静电场力,实现了单颗单细胞微液滴的电分离和富集.

  8. Encapsulation of single cells into monodisperse droplets by fluorescence-activated droplet formation on a microfluidic chip.

    Science.gov (United States)

    Hu, Rui; Liu, Pian; Chen, Pu; Wu, Liang; Wang, Yao; Feng, Xiaojun; Liu, Bi-Feng

    2016-06-01

    Random compartmentalization of cells by common droplet formation methods, i.e., T-junction and flow-focusing, results in low occupancy of droplets by single cells. To resolve this issue, a fluorescence-activated droplet formation method was developed for the on-command generation of droplets and encapsulation of single cells. In this method, droplets containing one cell were generated by switching on/off a two-phase hydrodynamic gating valve upon optical detection of single cells. To evaluate the developed method, flow visualization experiments were conducted with fluorescein. Results indicated that picoliter droplets of uniform sizes (RSDdroplets contained one bead. Further application of the developed methods to the compartmentalization of individual HeLa cells indicated 82.5% occupancy of droplets by single cells, representing a 3 fold increase in comparison to random compartmentalization.

  9. Magnetic hydrogel nanocomposites as remote controlled microfluidic valves.

    Science.gov (United States)

    Satarkar, Nitin S; Zhang, Wenli; Eitel, Richard E; Hilt, J Zach

    2009-06-21

    In recent years, hydrogels have attracted attention as active components in microfluidic devices. Here, we present a demonstration of remote controlled flow regulation in a microfluidic device using a hydrogel nanocomposite valve. To create the nanocomposite hydrogel, magnetic nanoparticles were dispersed in temperature-responsive N-isopropylacrylamide (NIPAAm) hydrogels. The swelling and collapse of the resultant nanocomposite can be remotely controlled by application of an alternating magnetic field (AMF). A ceramic microfluidic device with Y-junction channels was fabricated using low temperature co-fired ceramic (LTCC) technology. The nanocomposite was incorporated as a valve in one of the channels of the device. An AMF of frequency 293 kHz was then applied to the device and ON-OFF control on flow was achieved. A pressure transducer was placed at the inlet of the channel and pressure measurements were done for multiple AMF ON-OFF cycles to evaluate the reproducibility of the valve. Furthermore, the effect of the hydrogel geometry on the response time was characterized by hydrogels with different dimensions. Magnetic hydrogel nanocomposite films of different thicknesses (0.5, 1, 1.5 mm) were subjected to AMF and the kinetics of collapse and recovery were studied.

  10. Amidated pectin based hydrogels: synthesis, characterization and cytocompatibility study.

    Science.gov (United States)

    Mishra, R K; Singhal, J P; Datt, M; Banthia, A K

    2007-01-01

    The design and development of pectin-based hydrogels were attempted through the chemical modification of pectin with diethanolamine (DA). Diethanolamine modified pectin (DAMP) was synthesized by the chemical modification of pectin with varying concentrations of DA (1:1,1:2,1:3 and 1:4) at 5 oC in methanol. The modified product was used for the preparation of the hydrogel with glutaraldehyde (GA) reagent. The prepared hydrogels were characterized by Fourier transform infrared (FTIR) spectroscopy; organic elemental analysis, and X-ray diffraction (XRD), and swelling, hemocompatibility and cytocompatibility studies of the prepared hydrogels were also done. FTIR spectroscopy indicated the presence of primary and secondary amide absorption bands. The XRD pattern of the DAMP hydrogel clearly indicated that there was a considerable increase in crystallinity as compared to parent pectin. The degree of amidation (DA) and molar and mass reaction yields (Ym and Yn) was calculated based on the results of organic elemental analysis. Drug release studies from the hydrogel membranes were also evaluated in a Franz's diffusion cell. The hydrogels demonstrated good water holding properties and were found to be compatible with B-16 melanoma cells and human blood.

  11. Properties of radiation-synthesized polyvinylpyrrolidone/chitosan hydrogel blends

    Science.gov (United States)

    Mahmud, Maznah; Daik, Rusli; Adam, Zainah

    2015-09-01

    Poly(vinylpyrrolidone) (PVP)-crosslinked chitosan hydrogels were prepared by gamma radiation at various doses; 1, 3 5, 7, 10, 15, 20, 25 and 30kGy. Gamma radiation was used as a crosslinking tool which requires no chemical initiator, no heating process and need no purification step on the end products obtained. The hydrogel formulations were composed of 6% chitosan with average molecular weight (Mw) = 48 800 g/mol and 14% PVP with Mw = 10 000 g/mol in 2% lactic acid. Physical properties of hydrogels such as gel fraction and swelling property at pH 5.5 and pH 7.0 as well as syneresis activity were determined. It was found that different radiation dose induces different effect on hydrogels' network formed. Morphological study of hydrogels has been carried out by scanning electron microscope (SEM). From these preliminary evaluations, it can be concluded that gamma radiation is an effective tool for network development of hydrogels and it also induces enhancement on characteristics of hydrogels synthesized.

  12. Electrically responsive smart hydrogels in drug delivery: a review.

    Science.gov (United States)

    Kulkarni, R V; Biswanath, Sa

    2007-01-01

    Recently, much of the research activity has been focused on the development of stimuli-responsive hydrogels. Such hydrogels can show a response to the external or internal stimuli in the form of rapid changes in the physical nature of the polymeric network. This hydrogel property can be utilized for drug delivery applications. A literature search suggests that current research related to stimuli responsive drug delivery systems deals with temperature sensitive, pH sensitive, glucose sensitive and bio-molecule sensitive hydrogels. Electrically responsive hydrogels have also been recently developed in the form of gel matrices, implants and membranes for drug delivery. Control over the release of drugs such as quantity and timing, is essential to optimize drug therapy. Reports say that the electrically controlled in vitro and in vivo drug release studies have been carried out on polyelectrolyte hydrogels. A pulsatile pattern of drug release was achieved with the alternative application and removal of the electrical stimulus. This article gives an overview of the latest developments in the formulation of drug delivery systems using electrically responsive hydrogels.

  13. Injectable shear-thinning nanoengineered hydrogels for stem cell delivery

    Science.gov (United States)

    Thakur, Ashish; Jaiswal, Manish K.; Peak, Charles W.; Carrow, James K.; Gentry, James; Dolatshahi-Pirouz, Alireza; Gaharwar, Akhilesh K.

    2016-06-01

    Injectable hydrogels are investigated for cell encapsulation and delivery as they can shield cells from high shear forces. One of the approaches to obtain injectable hydrogels is to reinforce polymeric networks with high aspect ratio nanoparticles such as two-dimensional (2D) nanomaterials. 2D nanomaterials are an emerging class of ultrathin materials with a high degree of anisotropy and they strongly interact with polymers resulting in the formation of shear-thinning hydrogels. Here, we present 2D nanosilicate reinforced kappa-carrageenan (κCA) hydrogels for cellular delivery. κCA is a natural polysaccharide that resembles native glycosaminoglycans and can form brittle hydrogels via ionic crosslinking. The chemical modification of κCA with photocrosslinkable methacrylate groups renders the formation of a covalently crosslinked network (MκCA). Reinforcing the MκCA with 2D nanosilicates results in shear-thinning characteristics, and enhanced mechanical stiffness, elastomeric properties, and physiological stability. The shear-thinning characteristics of nanocomposite hydrogels are investigated for human mesenchymal stem cell (hMSC) delivery. The hMSCs showed high cell viability after injection and encapsulated cells showed a circular morphology. The proposed shear-thinning nanoengineered hydrogels can be used for cell delivery for cartilage tissue regeneration and 3D bioprinting.

  14. Lipid Structure in Triolein Lipid Droplets

    DEFF Research Database (Denmark)

    Chaban, Vitaly V; Khandelia, Himanshu

    2014-01-01

    Lipid droplets (LDs) are primary repositories of esterified fatty acids and sterols in animal cells. These organelles originate on the lumenal or cytoplasmic side of endoplasmic reticulum (ER) membrane and are released to the cytosol. In contrast to other intracellular organelles, LDs are composed...... of a mass of hydrophobic lipid esters coved by phospholipid monolayer. The small size and unique architecture of LDs makes it complicated to study LD structure by modern experimental methods. We discuss coarse-grained molecular dynamics (MD) simulations of LD formation in systems containing 1-palmitoyl-2...... to coarse-grained simulations, the presence of PE lipids at the interface has a little impact on distribution of components and on the overall LD structure. (4) The thickness of the lipid monolayer at the surface of the droplet is similar to the thickness of one leaflet of a bilayer. Computer simulations...

  15. Ballistic model to estimate microsprinkler droplet distribution

    Directory of Open Access Journals (Sweden)

    Conceição Marco Antônio Fonseca

    2003-01-01

    Full Text Available Experimental determination of microsprinkler droplets is difficult and time-consuming. This determination, however, could be achieved using ballistic models. The present study aimed to compare simulated and measured values of microsprinkler droplet diameters. Experimental measurements were made using the flour method, and simulations using a ballistic model adopted by the SIRIAS computational software. Drop diameters quantified in the experiment varied between 0.30 mm and 1.30 mm, while the simulated between 0.28 mm and 1.06 mm. The greatest differences between simulated and measured values were registered at the highest radial distance from the emitter. The model presented a performance classified as excellent for simulating microsprinkler drop distribution.

  16. Sessile droplet evaporation on superheated superhydrophobic surfaces

    CERN Document Server

    Hays, Robb C; Maynes, Daniel; Webb, Brent W

    2013-01-01

    This fluid dynamics video depicts the evaporation of sessile water droplets placed on heated superhydrophobic (SH) surfaces of varying cavity fraction, F_c, and surface temperature, T_s, above the saturation temperature, T_sat. Images were captured at 10,000 FPS and are played back at 30 FPS in this video. Teflon-coated silicon surfaces of F_c = 0, 0.5, 0.8, and 0.95 were used for these experiments. T_s ranging from 110{\\deg}C to 210{\\deg}C were studied. The video clips show how the boiling behavior of sessile droplets is altered with changes in surface microstructure. Quantitative results from heat transfer rate experiments conducted by the authors are briefly discussed near the end of the video.

  17. Adjuvants for single droplet application of glyphosate

    DEFF Research Database (Denmark)

    Mathiassen, Solvejg Kopp; Kudsk, Per; Lund, Ivar

    2016-01-01

    Retention and biological activity of droplets of glyphosate deposited onto plant leaves using a Drop on Demand inkjet printer application system, was examined on pot-grown Brassica napus, Solanum nigrum, Chenopodium album, Silene noctiflora and Echinocloa crus-galli plants. Retention was measured...... in admixture with the adjuvant Control was significantly higher on B. napus than with any of the other adjuvants, whereas on S. nigrum no difference was observed between Control and Bermocoll E 230 FQ. Only small differences among the adjuvants were observed on C. album, S. noctiflora and E. crus......-galli. The biological performance was not significantly influenced by the adjuvants except with C. album. However droplet volumes varied significantly with a minimum of 0.3 μl in admixture with Control and a maximum of 0.6 μl in combination with Adhere. In conclusion, retention could be optimized by adjuvant selection...

  18. Dancing droplets: Chemical space, substrates, and control

    Science.gov (United States)

    Cira, Nate; Benusiglio, Adrien; Prakash, Manu

    2015-11-01

    Previously we showed that droplets of propylene glycol and water display remarkable properties when placed on clean glass due to an interplay between surface tension and evaporation. (Cira, Benusiglio, Prakash: Nature, 2015). We showed that these mechanisms apply to a range of two-component mixtures of miscible liquids where one component has both higher surface tension and higher vapor pressure on a variety of high energy surfaces. We now show how this rule can be cheated using a simple trick. We go on to demonstrate applications for cleaning, and show how this system works on substrates prepared only with sunlight. We finish by demonstrating active control of droplets, allowing access to a host of new possibilities.

  19. Single Molecule Sensitive FRET in Attoliter Droplets

    CERN Document Server

    Milas, Peker; Gamari, Ben D; Goldner, Lori S

    2013-01-01

    Single molecular-pair fluorescence resonance energy transfer (spFRET) has become an cross-disciplinary tool for understanding molecular folding and interactions. While providing detailed information about the individual members of a molecular ensemble, this technique is always limited by fluorophore brightness and stability. In the case of diffusing molecules, the experiment is further limited by the number of photons that can be collected during the time it takes for a molecule to diffuse across the detection volume. To maximize the number of photons it is common to either increase the detection volume at the expense of increased background, or increase the diffusion time by adding glycerol or sucrose to increase viscosity. Here we demonstrate that FRET from attoliter volume (100 nm radius) aqueous droplets in perfluorinated oil has significantly higher signal-to-noise and a much wider dynamic range than FRET from molecules diffusing in solution. However, our measurements also reveal a droplet environment th...

  20. Engineering particle morphology with microfluidic droplets

    Science.gov (United States)

    Kang, Zhanxiao; Kong, Tiantian; Lei, Leyan; Zhu, Pingan; Tian, Xiaowei; Wang, Liqiu

    2016-07-01

    The controlled generation of microparticles with non-spherical features is of increasing importance. Such particles are useful for fundamental studies in areas such as self-assembly, as well as biomedical applications from drug carriers to photonic devices. We propose a simple model that captures the dominating factors controlling the size and morphology of non-spherical particles from phase separated droplets. The validity of our model is verified by comparing the generated non-spherical microparticles by droplet microfluidics. This simple relationship between the dominating factors and the final morphologies enables the production of non-spherical particles with well-defined shapes and tightly-controlled dimensions for a variety of applications from drug delivery vehicles to structural materials.

  1. Mechanism of supercooled droplet freezing on surfaces

    Science.gov (United States)

    Jung, Stefan; Tiwari, Manish K.; Doan, N. Vuong; Poulikakos, Dimos

    2012-01-01

    Understanding ice formation from supercooled water on surfaces is a problem of fundamental importance and general utility. Superhydrophobic surfaces promise to have remarkable 'icephobicity' and low ice adhesion. Here we show that their icephobicity can be rendered ineffective by simple changes in environmental conditions. Through experiments, nucleation theory and heat transfer physics, we establish that humidity and/or the flow of a surrounding gas can fundamentally switch the ice crystallization mechanism, drastically affecting surface icephobicity. Evaporative cooling of the supercooled liquid can engender ice crystallization by homogeneous nucleation at the droplet-free surface as opposed to the expected heterogeneous nucleation at the substrate. The related interplay between droplet roll-off and rapid crystallization is also studied. Overall, we bring a novel perspective to icing and icephobicity, unveiling the strong influence of environmental conditions in addition to the accepted effects of the surface conditions and hydrophobicity.

  2. Fundamental thermal noise in droplet microresonators

    CERN Document Server

    Giorgini, Antonio; Malara, Pietro; De Natale, Paolo; Gagliardi, Gianluca

    2016-01-01

    Liquid droplet whispering-gallery-mode microresonators open a new research frontier for optomechanics and photonic devices. At visible wavelengths, where most liquids are transparent, a major contribution to a droplet optical quality factor is expected theoretically from thermal surface distortions and capillary waves. Here, we investigate experimentally these predictions using transient cavity ring-down spectroscopy. In this way, the optical out-coupling and intrinsic loss are measured independently while any perturbation induced by thermal, acoustic and laser-frequency noise is avoided thanks to the ultra-short light-cavity interaction time. The measurements reveal a photon lifetime ten times longer than the thermal limit and suggest that capillary fluctuations activate surface scattering effects responsible for light coupling.

  3. Droplet Impact Dynamics on Micropillared Hydrophobic Surfaces

    CERN Document Server

    Patil, Nagesh D; Sharma, Atul

    2016-01-01

    The effect of pitch of the pillars and impact velocity are studied for the impact dynamics of a microliter water droplet on a micropillared hydrophobic surface. The results are presented qualitatively by the high-speed photography and quantitatively by the temporal variation of wetted diameter and droplet height. A characterization of the transient quantitative results is a novel aspect of our work. Three distinct regimes, namely, non-bouncing, complete bouncing and partial bouncing are presented. A critical pitch as well as impact velocity exists for the transition from one regime to another. This is explained with a demonstration of Cassie to Wenzel wetting transition in which the liquid penetrates in the grooves between the pillars at larger pitch or impact velocity. The regimes are demarcated on a map of pitch and impact velocity. A good agreement is reported between the present measurements and published analytical models.

  4. Injectable bioadhesive hydrogels with innate antibacterial properties

    Science.gov (United States)

    Giano, Michael C.; Ibrahim, Zuhaib; Medina, Scott H.; Sarhane, Karim A.; Christensen, Joani M.; Yamada, Yuji; Brandacher, Gerald; Schneider, Joel P.

    2014-06-01

    Surgical site infections cause significant postoperative morbidity and increased healthcare costs. Bioadhesives used to fill surgical voids and support wound healing are typically devoid of antibacterial activity. Here we report novel syringe-injectable bioadhesive hydrogels with inherent antibacterial properties prepared from mixing polydextran aldehyde and branched polyethylenimine. These adhesives kill both Gram-negative and Gram-positive bacteria, while sparing human erythrocytes. An optimal composition of 2.5 wt% oxidized dextran and 6.9 wt% polyethylenimine sets within seconds forming a mechanically rigid (~\

  5. Hydrogels for osteochondral repair based on photocrosslinkable carbamate dendrimers.

    Science.gov (United States)

    Degoricija, Lovorka; Bansal, Prashant N; Söntjens, Serge H M; Joshi, Neel S; Takahashi, Masaya; Snyder, Brian; Grinstaff, Mark W

    2008-10-01

    First generation, photocrosslinkable dendrimers consisting of natural metabolites (i.e., succinic acid, glycerol, and beta-alanine) and nonimmunogenic poly(ethylene glycol) (PEG) were synthesized divergently in high yields using ester and carbamate forming reactions. Aqueous solutions of these dendrimers were photocrosslinked with an eosin-based photoinitiator to afford hydrogels. The hydrogels displayed a range of mechanical properties based on their structure, generation size, and concentration in solution. All of the hydrogels showed minimal swelling characteristics. The dendrimer solutions were then photocrosslinked in situ in an ex vivo rabbit osteochondral defect (3 mm diameter and 10 mm depth), and the resulting hydrogels were subjected to physiologically relevant dynamic loads. Magnetic resonance imaging (MRI) showed the hydrogels to be fixated in the defect site after the repetitive loading regimen. The ([G1]-PGLBA-MA) 2-PEG hydrogel was chosen for the 6 month pilot in vivo rabbit study because this hydrogel scaffold could be prepared at low polymer weight (10 wt %) and possessed the largest compressive modulus of the 10% formulations, a low swelling ratio, and contained carbamate linkages, which are more hydrolytically stable than the ester linkages. The hydrogel-treated osteochondral defects showed good attachment in the defect site and histological analysis showed the presence of collagen II and glycosaminoglycans (GAGs) in the treated defects. By contrast, the contralateral unfilled defects showed poor healing and negligible GAG or collagen II production. Good mechanical properties, low swelling, good attachment to the defect site, and positive in vivo results illustrate the potential of these dendrimer-based hydrogels as scaffolds for osteochondral defect repair.

  6. Spreading of charged micro-droplets

    Directory of Open Access Journals (Sweden)

    Joseph Iaia

    2013-09-01

    Full Text Available We consider the spreading of a charged microdroplet on a flat dielectric surface whose spreading is driven by surface tension and electrostatic repulsion. This leads to a third order nonlinear partial differential equation that gives the evolution of the height profile. Assuming the droplets are circular we are able to prove existence of solutions with infinite contact angle and in many cases we are able to prove nonexistence of solutions with finite contact angle.

  7. Computational Fluid Dynamics of rising droplets

    Energy Technology Data Exchange (ETDEWEB)

    Wagner, Matthew [Lake Superior State University; Francois, Marianne M. [Los Alamos National Laboratory

    2012-09-05

    The main goal of this study is to perform simulations of droplet dynamics using Truchas, a LANL-developed computational fluid dynamics (CFD) software, and compare them to a computational study of Hysing et al.[IJNMF, 2009, 60:1259]. Understanding droplet dynamics is of fundamental importance in liquid-liquid extraction, a process used in the nuclear fuel cycle to separate various components. Simulations of a single droplet rising by buoyancy are conducted in two-dimensions. Multiple parametric studies are carried out to ensure the problem set-up is optimized. An Interface Smoothing Length (ISL) study and mesh resolution study are performed to verify convergence of the calculations. ISL is a parameter for the interface curvature calculation. Further, wall effects are investigated and checked against existing correlations. The ISL study found that the optimal ISL value is 2.5{Delta}x, with {Delta}x being the mesh cell spacing. The mesh resolution study found that the optimal mesh resolution is d/h=40, for d=drop diameter and h={Delta}x. In order for wall effects on terminal velocity to be insignificant, a conservative wall width of 9d or a nonconservative wall width of 7d can be used. The percentage difference between Hysing et al.[IJNMF, 2009, 60:1259] and Truchas for the velocity profiles vary from 7.9% to 9.9%. The computed droplet velocity and interface profiles are found in agreement with the study. The CFD calculations are performed on multiple cores, using LANL's Institutional High Performance Computing.

  8. Droplets and modes of respiratory disease transmission

    Science.gov (United States)

    Bourouiba, Lydia

    2014-11-01

    Direct observation of violent expirations such as sneezes and coughs events reveal that such flows are multiphase turbulent buoyant clouds with suspended droplets of various sizes. The effects of ambient conditions indoors, such as moisture and temperature, coupled with the water content of such clouds are key in shaping the pathogen footprint emitted by potentially sick individuals. Such pathogen footprint can change the patterns of respiratory disease transmission. We discuss how the fluid dynamics of violent expirations can help inform how.

  9. Splashing onset in dense suspension droplets

    OpenAIRE

    Peters, Ivo; Xu, Qin; Jaeger, Heinrich M.

    2013-01-01

    We investigate the impact of droplets of dense suspensions onto a solid substrate. We show that a global hydrodynamic balance is unable to predict the splash onset and propose to replace it by an energy balance at the level of the particles in the suspension. We experimentally verify that the resulting, particle-based Weber number gives a reliable, particle size and density dependent splash onset criterion. We further show that the same argument also explains why, in bimodal systems, smaller ...

  10. Droplet Microfluidic System with On-Demand Trapping and Releasing of Droplet for Drug Screening Applications.

    Science.gov (United States)

    Courtney, Matthew; Chen, Xiaoming; Chan, Sarah; Mohamed, Tarek; Rao, Praveen P N; Ren, Carolyn L

    2017-01-03

    96-Well plate has been the traditional method used for screening drug compounds libraries for potential bioactivity. Although this method has been proven successful in testing dose-response analysis, the microliter consumption of expensive reagents and hours of reaction and analysis time call for innovative methods for improvements. This work demonstrates a droplet microfluidic platform that has the potential to significantly reduce the reagent consumption and shorten the reaction and analysis time by utilizing nanoliter-sized droplets as a replacement of wells. This platform is evaluated by applying it to screen drug compounds that inhibit the tau-peptide aggregation, a phenomena related to Alzheimer's disease. In this platform, sample reagents are first dispersed into nanolitre-sized droplets by an immiscible carrier oil and then these droplets are trapped on-demand in the downstream of the microfluidic device. The relative decrease in fluorescence through drug inhibition is characterized using an inverted epifluorescence microscope. Finally, the trapped droplets are released on-demand after each test by manipulating the applied pressures to the channel network which allows continuous processing. The testing results agree well with that obtained from 96-well plates with much lower sample consumption (∼200 times lower than 96-well plate) and reduced reaction time due to increased surface volume ratio (2.5 min vs 2 h).

  11. Radiation crosslinking of starch/water-soluble polymer blends for hydrogel

    Energy Technology Data Exchange (ETDEWEB)

    Hashim, K.; Mohid, N.; Bahari, K.; Dahlan, K.Z. [Radiation Processing Technology Division, Malaysian Institute Nuclear Technology Research Malaysia (MINT), Bangi, 43000 Kajang (Malaysia)

    2000-03-01

    Water-soluble polymers such as PVP(polyvinyl pyrrolidone) and PVA(polyvinyl alcohol), in aqueous solution can form hydrogel easily upon gamma or electron beam irradiation. The properties of hydrogels, particularly for wound dressing application, can be further improved by adding sago starch to the blend. Results show improved gel strength and elongation properties of the hydrogel with increasing sago concentration. It was found that the PVA/sago hydrogel gives better gel strength and elongation than the PVP/sago hydrogel. The tackiness property of the PVA/sago hydrogel increased with increase amount of sago starch added. In case of PVP/sago hydrogel, the tackiness property shows significant increase with increasing amount of sago except for the 5%PVP composition. The swelling properties of PVP/sago and PVA/sago hydrogel decreased with increasing amount of sago but the crosslink density of the hydrogels also reduced. (author)

  12. Synthesis and characterization of antibacterial carboxymethyl cellulose/ZnO nanocomposite hydrogels.

    Science.gov (United States)

    Yadollahi, Mehdi; Gholamali, Iman; Namazi, Hassan; Aghazadeh, Mohammad

    2015-03-01

    In this study, carboxymethyl cellulose/ZnO nanocomposite hydrogels have been synthesized through the in situ formation of ZnO nanoparticles within swollen carboxymethyl cellulose hydrogels. The formation of ZnO nanoparticles in the hydrogels was confirmed using X-ray diffraction, UV-vis spectroscopy and scanning electron microscopy (SEM) studies. SEM micrographs revealed the formation of ZnO nanoparticles with size range of 10-20 nm within the hydrogel matrix. The prepared nanocomposite hydrogels showed a pH and salt sensitive swelling behavior. The ZnO nanocomposite hydrogels have rather higher swelling in different aqueous solutions in comparison with neat hydrogel. The nanocomposite hydrogels demonstrated antibacterial effects against Escherichia coli and Staphylococcus aureus bacteria. The developed carboxymethyl cellulose/ZnO nanocomposite hydrogels can be used effectively for biomedical application.

  13. Synthesis and characterization of antibacterial carboxymethylcellulose/CuO bio-nanocomposite hydrogels.

    Science.gov (United States)

    Yadollahi, Mehdi; Gholamali, Iman; Namazi, Hassan; Aghazadeh, Mohammad

    2015-02-01

    In this study, carboxymethyl cellulose/CuO nanocomposite hydrogels have been synthesized through the in situ formation of CuO nanoparticles within swollen carboxymethyl cellulose hydrogels. The aim of the study was to investigate whether these hydrogels have the potential to be used in antibacterial applications. The formation of CuO nanoparticles in the hydrogels was confirmed using X-ray diffraction and scanning electron microscopy studies. In addition, swelling behavior of nanocomposite hydrogels was investigated in various pH values and salt solutions. Furthermore, the CuO nanocomposite hydrogels were tested for antibacterial activities. The antibacterial activity of the nanocomposite hydrogels was studied by inhibition zone method against Escherichia coli and Staphylococcus aureus. The nanocomposite hydrogels demonstrated excellent antibacterial effects. Therefore, the developed carboxymethyl cellulose/CuO nanocomposite hydrogels can be used effectively for biomedical application.

  14. Bioinspired Smart Actuator Based on Graphene Oxide-Polymer Hybrid Hydrogels.

    Science.gov (United States)

    Wang, Tao; Huang, Jiahe; Yang, Yiqing; Zhang, Enzhong; Sun, Weixiang; Tong, Zhen

    2015-10-28

    Rapid response and strong mechanical properties are desired for smart materials used in soft actuators. A bioinspired hybrid hydrogel actuator was designed and prepared by series combination of three trunks of tough polymer-clay hydrogels to accomplish the comprehensive actuation of "extension-grasp-retraction" like a fishing rod. The hydrogels with thermo-creep and thermo-shrinking features were successively irradiated by near-infrared (NIR) to execute extension and retraction, respectively. The GO in the hydrogels absorbed the NIR energy and transformed it into thermo-energy rapidly and effectively. The hydrogel with adhesion or magnetic force was adopted as the "hook" of the hybrid hydrogel actuator for grasping object. The hook of the hybrid hydrogel actuator was replaceable according to applications, even with functional materials other than hydrogels. This study provides an innovative concept to explore new soft actuators through combining response hydrogels and programming the same stimulus.

  15. Decreasing luminescence lifetime of evaporating phosphorescent droplets

    Science.gov (United States)

    van der Voort, D. D.; Dam, N. J.; Sweep, A. M.; Kunnen, R. P. J.; van Heijst, G. J. F.; Clercx, H. J. H.; van de Water, W.

    2016-12-01

    Laser-induced phosphorescence has been used extensively to study spray dynamics. It is important to understand the influence of droplet evaporation in the interpretation of such measurements, as it increases luminescence quenching. By suspending a single evaporating n-heptane droplet in an acoustic levitator, the properties of lanthanide-complex europium-thenoyltrifluoroacetone-trioctylphosphine oxide (Eu-TTA-TOPO) phosphorescence are determined through high-speed imaging. A decrease was found in the measured phosphorescence decay coefficient (780 → 200 μs) with decreasing droplet volumes (10-9 → 10-11 m3) corresponding to increasing concentrations (10-4 → 10-2 M). This decrease continues up to the point of shell-formation at supersaturated concentrations. The diminished luminescence is shown not to be attributable to triplet-triplet annihilation, quenching between excited triplet-state molecules. Instead, the pure exponential decays found in the measurements show that a non-phosphorescent quencher, such as free TTA/TOPO, can be attributable to this decay. The concentration dependence of the phosphorescence lifetime can therefore be used as a diagnostic of evaporation in sprays.

  16. A frictional sliding algorithm for liquid droplets

    Science.gov (United States)

    Sauer, Roger A.

    2016-12-01

    This work presents a new frictional sliding algorithm for liquid menisci in contact with solid substrates. In contrast to solid-solid contact, the liquid-solid contact behavior is governed by the contact line, where a contact angle forms and undergoes hysteresis. The new algorithm admits arbitrary meniscus shapes and arbitrary substrate roughness, heterogeneity and compliance. It is discussed and analyzed in the context of droplet contact, but it also applies to liquid films and solids with surface tension. The droplet is modeled as a stabilized membrane enclosing an incompressible medium. The contact formulation is considered rate-independent such that hydrostatic conditions apply. Three distinct contact algorithms are needed to describe the cases of frictionless surface contact, frictionless line contact and frictional line contact. For the latter, a predictor-corrector algorithm is proposed in order to enforce the contact conditions at the contact line and thus distinguish between the cases of advancing, pinning and receding. The algorithms are discretized within a monolithic finite element formulation. Several numerical examples are presented to illustrate the numerical and physical behavior of sliding droplets.

  17. Adaptive Liquid Lens Actuated by Droplet Movement

    Directory of Open Access Journals (Sweden)

    Chao Liu

    2014-08-01

    Full Text Available In this paper we report an adaptive liquid lens actuated by droplet movement. Four rectangular PMMA (Polymethyl Methacrylate substrates are stacked to form the device structure. Two ITO (Indium Tin Oxide sheets stick on the bottom substrate. One PMMA sheet with a light hole is inserted in the middle of the device. A conductive droplet is placed on the substrate and touches the PMMA sheet to form a small closed reservoir. The reservoir is filled with another immiscible non-conductive liquid. The non-conductive liquid can form a smooth concave interface with the light hole. When the device is applied with voltage, the droplet stretches towards the reservoir. The volume of the reservoir reduces, changing the curvature of the interface. The device can thus achieve the function of an adaptive lens. Our experiments show that the focal length can be varied from −10 to −159 mm as the applied voltage changes from 0 to 65 V. The response time of the liquid lens is ~75 ms. The proposed device has potential applications in many fields such as information displays, imaging systems, and laser scanning systems.

  18. Characteristics of droplet motion in effervescent sprays

    Directory of Open Access Journals (Sweden)

    Jedelský Jan

    2014-03-01

    Full Text Available Time resolved droplet size and velocity measurement was made using Phase-Doppler anemometry in an effervescent spray at GLR of 6 % and operation pressure drops 21 – 52 kPa. The spray shows a size dependent variation of mean as well as fluctuating axial and radial velocities of droplets similarly for all operation regimes. Particles under 13 μm follow the gas flow, axially decelerated due to gas expansion. Velocity of medium sized particles is positively size correlated and larger particles keep high velocity, given them during discharge. Fluctuating radial velocity of small particles is larger than that of large particles while fluctuating axial velocity increases with size. Small particles thus reach a ratio of radial to axial velocity fluctuations ~ 0.6 but large particles only ~ 0.1, which indicates large transverse dispersion of small particles. Overall fluctuating velocity ratios smaller than 0.5 document an anisotropic character of the liquid mass fluctuations. Power spectral density (PSD of axial velocity fluctuations of large droplets is uniform up to 1 kHz, while PSD of smaller particles drops down with frequency for frequencies > 100 Hz. Large particles thus preserve the fluctuations imposed during discharge while the gas turbulence drops with frequency. Turbulence intensity reaches 14 to 21 % depending on pressure. Such high-turbulence character of the flow probably results from a heterogeneous gas–liquid mixture at the discharge.

  19. Dynamics of nanoscale droplets on moving surfaces.

    Science.gov (United States)

    Ritos, Konstantinos; Dongari, Nishanth; Borg, Matthew K; Zhang, Yonghao; Reese, Jason M

    2013-06-11

    We use molecular dynamics (MD) simulations to investigate the dynamic wetting of nanoscale water droplets on moving surfaces. The density and hydrogen bonding profiles along the direction normal to the surface are reported, and the width of the water depletion layer is evaluated first for droplets on three different static surfaces: silicon, graphite, and a fictitious superhydrophobic surface. The advancing and receding contact angles, and contact angle hysteresis, are then measured as a function of capillary number on smooth moving silicon and graphite surfaces. Our results for the silicon surface show that molecular displacements at the contact line are influenced greatly by interactions with the solid surface and partly by viscous dissipation effects induced through the movement of the surface. For the graphite surface, however, both the advancing and receding contact angles values are close to the static contact angle value and are independent of the capillary number; i.e., viscous dissipation effects are negligible. This finding is in contrast with the wetting dynamics of macroscale water droplets, which show significant dependence on the capillary number.

  20. Lattice Boltzmann Simulations of Evaporating Droplets with Nanoparticles

    Science.gov (United States)

    Zhao, Mingfei; Yong, Xin

    2016-11-01

    Elucidating the nanoparticle dynamics in drying droplets provides fundamental hydrodynamic insight into the evaporation-induced self-assembly, which is of great importance to materials printing and thin film processing. We develop a free-energy-based multiphase lattice Boltzmann model coupled with Lagrangian particle tracking to simulate evaporating particle-laden droplets on a solid substrate with specified wetting behavior. This work focuses on the interplay between the evaporation-driven advection and the self-organization of nanoparticles inside the droplet and at the droplet surface. For static droplets, the different parameters, fluid-particle interaction strength and particle number, governing the nanoparticle-droplet dynamics are systematically investigated, such as particle radial and circumferential distribution. We clarify the effect of nanoparticle presence on the droplet surface tension and wetting behavior. For evaporating droplets, we observe how droplet evaporation modulates the self-assembly of nanoparticles when the droplet has different static contact angles and hysteresis windows. We also confirm that the number of nanoparticles at the liquid-vapor interface influences the evaporation flux at the liquid-vapor interface.

  1. Volume changes in hydrogels subjected to finite deformations

    DEFF Research Database (Denmark)

    Drozdov, Aleksey; Christiansen, Jesper de Claville

    2013-01-01

    Constitutive equations are derived for the elastic response of hydrogels under an arbitrary deformationwith finite strains. An expression is proposed for the free energy density of a hydrogel based on the Floryconcept of a network of flexible chains with constrained junctions whose reference...... configuration differsfrom the initial configuration of a fully swollen gel. Adjustable parameters in the stress–strain relationsare found by fitting observations on poly(acrylamide) and gellan hydrogels under uniaxial tension andcompression. The effect of elongation ratio on osmotic Poisson’s ratio is examined...

  2. Anion-Responsive Metallopolymer Hydrogels for Healthcare Applications

    Science.gov (United States)

    Zhang, Jiuyang; Yan, Jing; Pageni, Parasmani; Yan, Yi; Wirth, Adam; Chen, Yun-Ping; Qiao, Yali; Wang, Qian; Decho, Alan W.; Tang, Chuanbing

    2015-01-01

    Metallopolymers combine a processable, versatile organic polymeric skeleton with functional metals, providing multiple functions and methodologies in materials science. Taking advantage of cationic cobaltocenium as the key building block, organogels could be simply switched to hydrogels via a highly efficient ion exchange. With the unique ionic complexion ability, cobaltocenium moieties provide a robust soft substrate for recycling antibiotics from water. The essential polyelectrolyte nature offers the metallopolymer hydrogels to kill multidrug resistant bacteria. The multifunctional characteristics of these hydrogels highlight the potential for metallopolymers in the field of healthcare and environmental treatment. PMID:26202475

  3. Patterning surface by site selective capture of biopolymer hydrogel beads.

    Science.gov (United States)

    Guyomard-Lack, Aurélie; Moreau, Céline; Delorme, Nicolas; Marquis, Mélanie; Fang, Aiping; Bardeau, Jean-François; Cathala, Bernard

    2012-06-01

    This communication describes the fabrication of microstructured biopolymer surfaces by the site-selective capture of pectin hydrogel beads. A positively charged surface consisting of poly-L-lysine (PLL) was subjected to site-selective enzymatic degradation using patterned polydimethylsiloxane (PDMS) stamps covalently modified with trypsin, according to the recently described method. The patterned surface was used to capture ionically cross-linked pectin beads. The desired patterning of the hydrogel surfaces was generated by site-selective immobilization of these pectin beads. The ability of the hydrogels to be dried and swollen in water was assessed.

  4. ON SWELLING CHARACTERISTICS AND MECHANISM OF TEMPERATURE SENSITIVE HYDROGELS

    Institute of Scientific and Technical Information of China (English)

    YU Xisheng; TONG Shuixin; SUN Yishi

    1990-01-01

    A series of N-substituted acrylamide monomers and the temperature sensitive hydrogels of their copolymer with N, N ' methylene-bis -acrylamide (Bis) have been synthesized. The effects of monomer structures, composition of the initial monomer mixture, polymerization temperature, the extent of ionization of the network and the presence of acid, base, salt or organic compound on the formation and the swelling characteristics of the temperature sensitive hydrogels have been systematically studied. The mechanism of the temperature sensitive phase transformation of the hydrogels was also investigated.

  5. Three-dimensional biomimetic mineralization of dense hydrogel templates.

    Science.gov (United States)

    Liu, Gao; Zhao, Dacheng; Tomsia, Antoni P; Minor, Andrew M; Song, Xiangyun; Saiz, Eduardo

    2009-07-29

    An electric-current-assisted method was used to mineralize dense hydrogels and create hydroxyapatite/hydrogel composites with unique hierarchical structures. The microstructure of the final material can be controlled by the mineralization technique and the chemistry of the organic matrix. A hydroxyapatite/hydrogel composite was obtained with a large inorganic content (approximately 60% of the weight of the organics). After being heated to 1050 degrees C, the sintered inorganic phase has a very uniformly distributed porosity and its Brunauer-Emmett-Teller (BET) surface area is 0.68 m(2)/g.

  6. Conducting polymer-hydrogels for medical electrode applications

    Directory of Open Access Journals (Sweden)

    Rylie A Green, Sungchul Baek, Laura A Poole-Warren and Penny J Martens

    2010-01-01

    Full Text Available Conducting polymers hold significant promise as electrode coatings; however, they are characterized by inherently poor mechanical properties. Blending or producing layered conducting polymers with other polymer forms, such as hydrogels, has been proposed as an approach to improving these properties. There are many challenges to producing hybrid polymers incorporating conducting polymers and hydrogels, including the fabrication of structures based on two such dissimilar materials and evaluation of the properties of the resulting structures. Although both fabrication and evaluation of structure–property relationships remain challenges, materials comprised of conducting polymers and hydrogels are promising for the next generation of bioactive electrode coatings.

  7. In vitro characterization of perfluorocarbon droplets for focused ultrasound therapy

    Energy Technology Data Exchange (ETDEWEB)

    Schad, Kelly C; Hynynen, Kullervo, E-mail: khynynen@sri.utoronto.c [Imaging Research, Sunnybrook Health Sciences Centre, 2075 Bayview Ave, Toronto, Ontario M4N 3M5 (Canada); Department of Medical Biophysics, University of Toronto (Canada)

    2010-09-07

    Focused ultrasound therapy can be enhanced with microbubbles by thermal and cavitation effects. However, localization of treatment is difficult as bioeffects can occur outside of the target region. Spatial control of bubbles can be achieved by ultrasound-induced conversion of liquid perfluorocarbon droplets to gas bubbles. This study was undertaken to determine the acoustic parameters for bubble production by droplet conversion and how it depends on the acoustic conditions and droplet physical parameters. Lipid-encapsulated droplets containing dodecafluoropentane were manufactured with sizes ranging from 1.9 to 7.2 {mu}m in diameter and diluted to a concentration of 8 x 10{sup 6} droplets mL{sup -1}. The droplets were sonicated in vitro with a focused ultrasound transducer and varying frequency and exposure under flow conditions through an acoustically transparent vessel. The sonications were 10 ms in duration at frequencies of 0.578, 1.736 and 2.855 MHz. The pressure threshold for droplet conversion was measured with an active transducer operating in pulse-echo mode and simultaneous measurements of broadband acoustic emissions were performed with passive acoustic detection. The results show that droplets cannot be converted at low frequency without broadband emissions occurring. However, the pressure threshold for droplet conversion decreased with increasing frequency, exposure and droplet size. The pressure threshold for broadband emissions was independent of the droplet size and was 2.9, 4.4 and 5.3 MPa for 0.578, 1736 and 2.855 MHz, respectively. In summary, we have demonstrated that droplet conversion is feasible for clinically relevant sized droplets and acoustic exposures.

  8. Inertial migration of deformable droplets in a microchannel

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Xiaodong; Xue, Chundong; Hu, Guoqing, E-mail: guoqing.hu@imech.ac.cn, E-mail: sunjs@nanoctr.cn [State Key Laboratory of Nonlinear Mechanics, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190 (China); Zhang, Li [Research and Development Center, Synfuels China Technology Co., Ltd., Beijing 101407 (China); Jiang, Xingyu; Sun, Jiashu, E-mail: guoqing.hu@imech.ac.cn, E-mail: sunjs@nanoctr.cn [Beijing Engineering Research Center for BioNanotechnology and Key Lab for Biological Effects of Nanomaterials and Nanosafety, National Center for Nanoscience and Technology, Beijing 100190 (China)

    2014-11-15

    The microfluidic inertial effect is an effective way of focusing and sorting droplets suspended in a carrier fluid in microchannels. To understand the flow dynamics of microscale droplet migration, we conduct numerical simulations on the droplet motion and deformation in a straight microchannel. The results are compared with preliminary experiments and theoretical analysis. In contrast to most existing literature, the present simulations are three-dimensional and full length in the streamwise direction and consider the confinement effects for a rectangular cross section. To thoroughly examine the effect of the velocity distribution, the release positions of single droplets are varied in a quarter of the channel cross section based on the geometrical symmetries. The migration dynamics and equilibrium positions of the droplets are obtained for different fluid velocities and droplet sizes. Droplets with diameters larger than half of the channel height migrate to the centerline in the height direction and two equilibrium positions are observed between the centerline and the wall in the width direction. In addition to the well-known Segré-Silberberg equilibrium positions, new equilibrium positions closer to the centerline are observed. This finding is validated by preliminary experiments that are designed to introduce droplets at different initial lateral positions. Small droplets also migrate to two equilibrium positions in the quarter of the channel cross section, but the coordinates in the width direction are between the centerline and the wall. The equilibrium positions move toward the centerlines with increasing Reynolds number due to increasing deformations of the droplets. The distributions of the lift forces, angular velocities, and the deformation parameters of droplets along the two confinement direction are investigated in detail. Comparisons are made with theoretical predictions to determine the fundamentals of droplet migration in microchannels. In

  9. In vitro characterization of perfluorocarbon droplets for focused ultrasound therapy

    Science.gov (United States)

    Schad, Kelly C.; Hynynen, Kullervo

    2010-09-01

    Focused ultrasound therapy can be enhanced with microbubbles by thermal and cavitation effects. However, localization of treatment is difficult as bioeffects can occur outside of the target region. Spatial control of bubbles can be achieved by ultrasound-induced conversion of liquid perfluorocarbon droplets to gas bubbles. This study was undertaken to determine the acoustic parameters for bubble production by droplet conversion and how it depends on the acoustic conditions and droplet physical parameters. Lipid-encapsulated droplets containing dodecafluoropentane were manufactured with sizes ranging from 1.9 to 7.2 µm in diameter and diluted to a concentration of 8 × 106 droplets mL-1. The droplets were sonicated in vitro with a focused ultrasound transducer and varying frequency and exposure under flow conditions through an acoustically transparent vessel. The sonications were 10 ms in duration at frequencies of 0.578, 1.736 and 2.855 MHz. The pressure threshold for droplet conversion was measured with an active transducer operating in pulse-echo mode and simultaneous measurements of broadband acoustic emissions were performed with passive acoustic detection. The results show that droplets cannot be converted at low frequency without broadband emissions occurring. However, the pressure threshold for droplet conversion decreased with increasing frequency, exposure and droplet size. The pressure threshold for broadband emissions was independent of the droplet size and was 2.9, 4.4 and 5.3 MPa for 0.578, 1736 and 2.855 MHz, respectively. In summary, we have demonstrated that droplet conversion is feasible for clinically relevant sized droplets and acoustic exposures.

  10. Evaporation of Droplets on Superhydrophobic Surfaces: Surface Roughness and Small Droplet Size Effects

    Science.gov (United States)

    Chen, Xuemei; Ma, Ruiyuan; Li, Jintao; Hao, Chonglei; Guo, Wei; Luk, B. L.; Li, Shuai Cheng; Yao, Shuhuai; Wang, Zuankai

    2012-09-01

    Evaporation of a sessile droplet is a complex, nonequilibrium phenomenon. Although evaporating droplets upon superhydrophobic surfaces have been known to exhibit distinctive evaporation modes such as a constant contact line (CCL), a constant contact angle (CCA), or both, our fundamental understanding of the effects of surface roughness on the wetting transition remains elusive. We show that the onset time for the CCL-CCA transition and the critical base size at the Cassie-Wenzel transition exhibit remarkable dependence on the surface roughness. Through global interfacial energy analysis we reveal that, when the size of the evaporating droplet becomes comparable to the surface roughness, the line tension at the triple line becomes important in the prediction of the critical base size. Last, we show that both the CCL evaporation mode and the Cassie-Wenzel transition can be effectively inhibited by engineering a surface with hierarchical roughness.

  11. Hydrogel microphones for stealthy underwater listening

    Science.gov (United States)

    Gao, Yang; Song, Jingfeng; Li, Shumin; Elowsky, Christian; Zhou, You; Ducharme, Stephen; Chen, Yong Mei; Zhou, Qin; Tan, Li

    2016-08-01

    Exploring the abundant resources in the ocean requires underwater acoustic detectors with a high-sensitivity reception of low-frequency sound from greater distances and zero reflections. Here we address both challenges by integrating an easily deformable network of metal nanoparticles in a hydrogel matrix for use as a cavity-free microphone. Since metal nanoparticles can be densely implanted as inclusions, and can even be arranged in coherent arrays, this microphone can detect static loads and air breezes from different angles, as well as underwater acoustic signals from 20 Hz to 3 kHz at amplitudes as low as 4 Pa. Unlike dielectric capacitors or cavity-based microphones that respond to stimuli by deforming the device in thickness directions, this hydrogel device responds with a transient modulation of electric double layers, resulting in an extraordinary sensitivity (217 nF kPa-1 or 24 μC N-1 at a bias of 1.0 V) without using any signal amplification tools.

  12. Evaluation of hydrogel-coated glutamate microsensors.

    Science.gov (United States)

    Oldenziel, Weite H; Dijkstra, Gerrit; Cremers, Thomas I F H; Westerink, Ben H C

    2006-05-15

    Glutamate microsensors form a promising analytical tool for monitoring neuronally derived glutamate directly in the brain. However, when a microsensor is implanted in brain tissue, many factors can diminish its performance. Consequently, a thorough characterization and evaluation of a microsensor is required concerning all factors that may possibly be encountered in vivo. The present report deals with the validation of a hydrogel-coated glutamate microsensor. This microsensor is constructed by coating a carbon fiber electrode (10-microm diameter; 300-500 microm long) with a five-component redox hydrogel, in which L-glutamate oxidase, horseradish peroxidase, and ascorbate oxidase are wired via poly(ethylene glycol) diglycidyl ether to an osmium-containing redox polymer. A thin Nafion coating completes the construction. Although this microsensor was previously used in vivo, information concerning its validation is limited. In the present study, attention was given to its selectivity, specificity, calibration, oxygen dependency, biofouling, operating potential dependency, and linear range. In addition, successful microsensor experiments in microdialysate, in vitro (in organotypic hippocampal slice cultures), and in vivo (in anesthesized rats) are shown.

  13. Structure and Conductivity of Semiconducting Polymer Hydrogels

    Energy Technology Data Exchange (ETDEWEB)

    Huber, Rachel C.; Ferreira, Amy S.; Aguirre, Jordan C.; Kilbride, Daniel; Toso, Daniel B.; Mayoral, Kenny; Zhou, Z. Hong; Kopidakis, Nikos; Rubin, Yves; Schwartz, Benjamin J.; Mason, Thomas G.; Tolbert, Sarah H.

    2016-07-07

    Poly(fluorene-alt-thiophene) (PFT) is a conjugated polyelectrolyte that self-assembles into rod-like micelles in water, with the conjugated polymer backbone running along the length of the micelle. At modest concentrations (-10 mg/mL in aqueous solutions), PFT forms hydrogels, and this work focuses on understanding the structure and intermolecular interactions in those gel networks. The network structure can be directly visualized using cryo electron microscopy. Oscillatory rheology studies further tell us about connectivity within the gel network, and the data are consistent with a picture where polymer chains bridge between micelles to hold the network together. Addition of tetrahydrofuran (THF) to the gels breaks those connections, but once the THF is removed, the gel becomes stronger than it was before, presumably due to the creation of a more interconnected nanoscale architecture. Small polymer oligomers can also passivate the bridging polymer chains, breaking connections between micelles and dramatically weakening the hydrogel network. Fits to solution-phase small-angle X-ray scattering data using a Dammin bead model support the hypothesis of a bridging connection between PFT micelles, even in dilute aqueous solutions. Finally, time-resolved microwave conductivity measurements on dried samples show an increase in carrier mobility after THF annealing of the PFT gel, likely due to increased connectivity within the polymer network.

  14. Biological response of hydrogels embedding gold nanoparticles.

    Science.gov (United States)

    Marsich, Eleonora; Travan, Andrea; Donati, Ivan; Di Luca, Andrea; Benincasa, Monica; Crosera, Matteo; Paoletti, Sergio

    2011-04-01

    A nanocomposite hydrogel based on natural polysaccharides and gold nanoparticles (ACnAu) has been prepared and its biological effects were tested in vitro with both bacteria and eukaryotic cells. Antimicrobial tests showed that AC-nAu gels are effective in killing both gram+ (Staphylococcus aureus) and gram- (Pseudomonas aeruginosa) bacteria. LDH assays pointed at a toxic effect towards eukaryotic cell-lines (HepG2 and MG63), in contrast with the case of silver-based hydrogels; cytofluorimetry studies demonstrated an apoptosis-related mechanism induced by increase of ROS intracellular level which leads to cell death after 24 h of direct contact with AC-nAu gels. In vivo biocompatibility has been evaluated in a rat model, investigating the peri-implant soft tissue reaction after 1 month of implantation. The results show that silver-containing samples induced a fibrotic capsule of the same average thickness of the control sample (devoid of nanoparticles) (∼50 μm), while in the case of gold containing materials the fibrotic capsule was thicker (∼100 μm), confirming a higher biocompatibility for silver-based samples than for gold-based ones.

  15. Hands-off preparation of monodisperse emulsion droplets using a poly(dimethylsiloxane) microfluidic chip for droplet digital PCR.

    Science.gov (United States)

    Tanaka, Hironari; Yamamoto, Shunsuke; Nakamura, Arichika; Nakashoji, Yuta; Okura, Naoaki; Nakamoto, Norimitsu; Tsukagoshi, Kazuhiko; Hashimoto, Masahiko

    2015-04-21

    A fully autonomous method of creating highly monodispersed emulsion droplets with a low sample dead volume was realized using a degassed poly(dimethylsiloxane) (PDMS) microfluidic chip possessing a simple T-junction channel geometry with two inlet reservoirs for oil and water to be loaded and one outlet reservoir for the collection of generated droplets. Autonomous transport of oil and water phases in the channel was executed by permeation of air confined inside the outlet reservoir into the degassed PDMS. The only operation required for droplet creation was simple pipetting of oil and aqueous solutions into the inlet reservoirs. Long-lasting fluid transport in the current system enabled us to create ca. 51,000 monodispersed droplets (with a coefficient of variation of droplet diameter) in 80 min with a maximum droplet generation rate of ca. 12 Hz using a PDMS chip that had been degassed overnight. With multiple time-course measurements, the reproducibility in the current method of droplet preparation was confirmed, with tunable droplet sizes achieved simply by changing the cross-sectional dimensions of the microchannel. Furthermore, it was verified that the resultant droplets could serve as microreactors for digital polymerase chain reactions. This hands-free technique for preparing monodispersed droplets in a very facile and inexpensive fashion is intended for, but not limited to, bioanalytical applications and is also applicable to material syntheses.

  16. Formation of droplets of alternating composition in microfluidic channels and applications to indexing of concentrations in droplet-based assays.

    Science.gov (United States)

    Zheng, Bo; Tice, Joshua D; Ismagilov, Rustem F

    2004-09-01

    For screening the conditions for a reaction by using droplets (or plugs) as microreactors, the composition of the droplets must be indexed. Indexing here refers to measuring the concentration of a solute by addition of a marker, either internal or external. Indexing may be performed by forming droplet pairs, where in each pair the first droplet is used to conduct the reaction, and the second droplet is used to index the composition of the first droplet. This paper characterizes a method for creating droplet pairs by generating alternating droplets, of two sets of aqueous solutions in a flow of immiscible carrier fluid within PDMS and glass microfluidic channels. The paper also demonstrates that the technique can be used to index the composition of the droplets, and this application is illustrated by screening conditions of protein crystallization. The fluid properties required to form the steady flow of the alternating droplets in a microchannel were characterized as a function of the capillary number Ca and water fraction. Four regimes were observed. At the lowest values of Ca, the droplets of the two streams coalesced; at intermediate values of Ca the alternating droplets formed reliably. At even higher values of Ca, shear forces dominated and caused formation of droplets that were smaller than the cross-sectional dimension of the channel; at the highest values of Ca, coflowing laminar streams of the two immiscible fluids formed. In addition to screening of protein crystallization conditions, understanding of the fluid flow in this system may extend this indexing approach to other chemical and biological assays performed on a microfluidic chip.

  17. Generation and mixing of subfemtoliter aqueous droplets on demand.

    Science.gov (United States)

    Tang, Jianyong; Jofre, Ana M; Kishore, Rani B; Reiner, Joseph E; Greene, Mark E; Lowman, Geoffrey M; Denker, John S; Willis, Christina C C; Helmerson, Kristian; Goldner, Lori S

    2009-10-01

    We describe a novel method of generating monodisperse subfemtoliter aqueous droplets on demand by means of piezoelectric injection. Droplets with volumes down to 200 aL are generated by this technique. The droplets are injected into a low refractive index perfluorocarbon so that they can be optically trapped. We demonstrate the use of optical tweezers to manipulate and mix droplets. For example, using optical tweezers we bring two droplets, one containing a calcium sensitive dye and the other calcium chloride, into contact. The droplets coalesce with a resulting reaction time of about 1 ms. The monodispersity, manipulability, repeatability, small size, and fast mixing afforded by this system offer many opportunities for nanochemistry and observation of chemical reactions on a molecule-by-molecule basis.

  18. Collective waves in dense and confined microfluidic droplet arrays

    Science.gov (United States)

    Schiller, Ulf D.; Fleury, Jean-Baptiste; Seemann, Ralf; Gompper, Gerhard

    Excitation mechanisms for collective waves in confined dense one-dimensional microfluidic droplet arrays are investigated by experiments and computer simulations. We demonstrate that distinct modes can be excited by creating specific `defect' patterns in flowing droplet trains. Excited longitudinal modes exhibit a short-lived cascade of pairs of laterally displacing droplets. Transversely excited modes obey the dispersion relation of microfluidic phonons and induce a coupling between longitudinal and transverse modes, whose origin is the hydrodynamic interaction of the droplets with the confining walls. Moreover, we investigate the long-time behaviour of the oscillations and discuss possible mechanisms for the onset of instabilities. Our findings demonstrate that the collective dynamics of microfluidic droplet ensembles can be studied particularly well in dense and confined systems. Experimentally, the ability to control microfluidic droplets may allow to modulate the refractive index of optofluidic crystals which is a promising approach for the production of dynamically programmable metamaterials.

  19. Effects of induced vibration modes on droplet sliding phenomena

    Science.gov (United States)

    Mejia, Jose Eduardo; Alvarado, Jorge; Yao, Chun-Wei; Dropwise Condensation Collaboration; Engineered Surfaces Collaboration

    2016-11-01

    An analytical and experimental investigation has been undertaken to understand the effects of induced vibration modes on droplet sliding phenomena. A mathematical model has been postulated which is capable of estimating accurately droplet sliding angles when using hydrophobic and hydrophilic surfaces. The model, which takes into account equilibrium contact angle, contact angle hysteresis, and droplet volume, has been validated using experimental data. The model has been modified to be able to estimate droplet sliding angle when different modes of vibrations are imposed on the surfaces. Experimental results to date reveal that when resonance modes of vibrations are imposed, the droplet sliding angles decrease considerably. The results also indicate that the modified model can be used effectively to relate imposed resonance frequencies to the critical sliding angle of droplets. LSAMP sponsored NSF Fellowship.

  20. Droplet actuation induced by coalescence: experimental evidences and phenomenological modeling

    CERN Document Server

    Sellier, Mathieu; Gaubert, Cécile; Verdier, Claude

    2012-01-01

    This paper considers the interaction between two droplets placed on a substrate in immediate vicinity. We show here that when the two droplets are of different fluids and especially when one of the droplet is highly volatile, a wealth of fascinating phenomena can be observed. In particular, the interaction may result in the actuation of the droplet system, i.e. its displacement over a finite length. In order to control this displacement, we consider droplets confined on a hydrophilic stripe created by plasma-treating a PDMS substrate. This controlled actuation opens up unexplored opportunities in the field of microfluidics. In order to explain the observed actuation phenomenon, we propose a simple phenomenological model based on Newton's second law and a simple balance between the driving force arising from surface energy gradients and the viscous resistive force. This simple model is able to reproduce qualitatively and quantitatively the observed droplet dynamics.