WorldWideScience

Sample records for catalytic c-h activation

  1. Asymmetric Intramolecular Alkylation of Chiral Aromatic Imines via Catalytic C-H Bond Activation

    Energy Technology Data Exchange (ETDEWEB)

    Watzke, Anja; Wilson, Rebecca; O' Malley, Steven; Bergman, Robert; Ellman, Jonathan

    2007-04-16

    The asymmetric intramolecular alkylation of chiral aromatic aldimines, in which differentially substituted alkenes are tethered meta to the imine, was investigated. High enantioselectivities were obtained for imines prepared from aminoindane derivatives, which function as directing groups for the rhodium-catalyzed C-H bond activation. Initial demonstration of catalytic asymmetric intramolecular alkylation also was achieved by employing a sterically hindered achiral imine substrate and catalytic amounts of a chiral amine.

  2. Synthesis of a tricyclic mescaline analogue by catalytic C-H bond activation.

    Science.gov (United States)

    Ahrendt, Kateri A; Bergman, Robert G; Ellman, Jonathan A

    2003-04-17

    [reaction: see text] A tetrahydrobis(benzofuran) mescaline analogue has been prepared in six steps and 38% overall yield from (4'-O-methyl)methyl gallate. The key step in this synthesis is a tandem cyclization reaction via directed C[bond]H activation followed by olefin insertion.

  3. Catalytic C-H bond silylation of aromatic heterocycles.

    Science.gov (United States)

    Toutov, Anton A; Liu, Wen-Bo; Betz, Kerry N; Stoltz, Brian M; Grubbs, Robert H

    2015-12-01

    This protocol describes a method for the direct silylation of the carbon-hydrogen (C-H) bond of aromatic heterocycles using inexpensive and abundant potassium tert-butoxide (KOt-Bu) as the catalyst. This catalytic cross-dehydrogenative coupling of simple hydrosilanes and various electron-rich aromatic heterocycles enables the synthesis of valuable silylated heteroarenes. The products thus obtained can be used as versatile intermediates, which facilitate the divergent synthesis of pharmaceutically relevant compound libraries from a single Si-containing building block. Moreover, a variety of complex Si-containing motifs, such as those produced by this protocol, are being actively investigated as next-generation therapeutic agents, because they can have improved pharmacokinetic properties compared with the original all-carbon drug molecules. Current competing methods for C-H bond silylation tend to be incompatible with functionalities, such as Lewis-basic heterocycles, that are often found in pharmaceutical substances; this leaves de novo synthesis as the principal strategy for preparation of the target sila-drug analog. Moreover, competing methods tend to be limited in the scope of hydrosilane that can be used, which restricts the breadth of silicon-containing small molecules that can be accessed. The approach outlined in this protocol enables the chemoselective and regioselective late-stage silylation of small heterocycles, including drugs and drug derivatives, with a broad array of hydrosilanes in the absence of precious metal catalysts, stoichiometric reagents, sacrificial hydrogen acceptors or high temperatures. Moreover, H2 is the only by-product generated. The procedure normally requires 48-75 h to be completed.

  4. Catalytic intermolecular amination of C-H bonds: method development and mechanistic insights.

    Science.gov (United States)

    Fiori, Kristin Williams; Du Bois, J

    2007-01-24

    Reaction methodology for intermolecular C-H amination of benzylic and 3 degrees C-H bonds is described. This process uses the starting alkane as the limiting reagent, gives optically pure tetrasubstituted amines through stereospecific insertion into enantiomeric 3 degrees centers, displays high chemoselectivity for benzylic oxidation, and enables the facile preparation of isotopically enriched 15N-labeled compounds. Access to substituted amines, amino alcohols, and diamines is thereby made possible in a single transformation. Important information relevant to understanding the initial steps in the catalytic cycle, reaction chemoselectivity, the nature of the active oxidant, and pathways for catalyst inactivation has been gained through mechanistic analysis; these studies are also presented.

  5. Moving to Sustainable Metals. Multifunctional Ligands in Catalytic, Outer Sphere C-H, N-H and O-H Activation

    Energy Technology Data Exchange (ETDEWEB)

    Crabtree, Robert [Yale Univ., New Haven, CT (United States)

    2015-03-03

    Much of our work during this grant period has emphasized green chemistry and sustainability. For example, we were able to convert glycerine, a waste byproduct of biodiesel production, into lactic acid, a compound with numerous applications, notably in the food and cosmetics industry, as well as being a source material for a biodegradable plastic. This work required a catalyst, that ceases to work after a certain lapse of time. We were able to identify the way in which this deactivation occurs by identifying some of the metal catalyst deactivation products. These proved to be multimetallic clusters containing up to six metals and up to 14 hydrogen atoms. Both the catalytic reaction itself and the deactivation structures are novel and unexpected. We have previously proposed that nitrogen heterocycles could be good energy carriers in a low CO2 future world. In another part of our study, we found catalysts for introduction of hydrogen, an energy carrier that is hard to store, into nitrogen heterocycles. The mechanism of this process proved to be unusual in that the catalyst transfers the H2 to the heterocycle in the form of H+ and H-, first transferring the H+ and only then the H-. In a third area of study, some of our compounds, originally prepared for DOE catalysis purposes, also proved useful in hydrocarbon oxidation and in water oxidation. The latter is important in solar-to-fuel work, because, by analogy with natural photosynthesis, the goal of the Yale Solar Group of four PIs is to convert sunlight to hydrogen and oxygen, which requires water splitting catalysts. The catalysts that proved useful mediate the latter reaction: water oxidation to oxygen. In a more technical study, we developed methods for distinguishing the case where catalysis is mediated by a soluble catalyst from cases where catalysis arises from a deposit of finely divided solid. One particular application involved electrocatalysis

  6. Bipyridine- and phenanthroline-based metal-organic frameworks for highly efficient and tandem catalytic organic transformations via directed C-H activation

    Energy Technology Data Exchange (ETDEWEB)

    Manna, Kuntal [Univ. of Chicago, Chicago, IL (United States); Zhang, Teng [Univ. of Chicago, Chicago, IL (United States); Greene, Francis X. [Univ. of Chicago, Chicago, IL (United States); Lin, Wenbin [Univ. of Chicago, Chicago, IL (United States)

    2015-02-16

    We report here the synthesis of a series of robust and porous bipyridyl- and phenanthryl-based metal–organic frameworks (MOFs) of UiO topology (BPV-MOF, mBPV-MOF, and mPT-MOF) and their postsynthetic metalation to afford highly active single-site solid catalysts. While BPV-MOF was constructed from only bipyridyl-functionalized dicarboxylate linker, both mBPV- and mPT-MOF were built with a mixture of bipyridyl- or phenanthryl-functionalized and unfunctionalized dicarboxylate linkers. The postsynthetic metalation of these MOFs with [Ir(COD)(OMe)]2 provided Ir-functionalized MOFs (BPV-MOF-Ir, mBPV-MOF-Ir, and mPT-MOF-Ir), which are highly active catalysts for tandem hydrosilylation of aryl ketones and aldehydes followed by dehydrogenative ortho-silylation of benzylicsilyl ethers as well as C–H borylation of arenes using B₂pin₂. Both mBPV-MOF-Ir and mPT-MOF-Ir catalysts displayed superior activities compared to BPV-MOF-Ir due to the presence of larger open channels in the mixed-linker MOFs. Impressively, mBPV-MOF-Ir exhibited high TONs of up to 17000 for C–H borylation reactions and was recycled more than 15 times. The mPT-MOF-Ir system is also active in catalyzing tandem dehydrosilylation/dehydrogenative cyclization of N-methylbenzyl amines to azasilolanes in the absence of a hydrogen acceptor. Importantly, MOF-Ir catalysts are significantly more active (up to 95 times) and stable than their homogeneous counterparts for all three reactions, strongly supporting the beneficial effects of active site isolation within MOFs. This work illustrates the ability to increase MOF open channel sizes by using the mixed linker approach and shows the enormous potential of developing highly active and robust single-site solid catalysts based on MOFs containing nitrogen-donor ligands for important organic transformations.

  7. Catalytic alkylation of remote C-H bonds enabled by proton-coupled electron transfer

    Science.gov (United States)

    Choi, Gilbert J.; Zhu, Qilei; Miller, David C.; Gu, Carol J.; Knowles, Robert R.

    2016-11-01

    Despite advances in hydrogen atom transfer (HAT) catalysis, there are currently no molecular HAT catalysts that are capable of homolysing the strong nitrogen-hydrogen (N-H) bonds of N-alkyl amides. The motivation to develop amide homolysis protocols stems from the utility of the resultant amidyl radicals, which are involved in various synthetically useful transformations, including olefin amination and directed carbon-hydrogen (C-H) bond functionalization. In the latter process—a subset of the classical Hofmann-Löffler-Freytag reaction—amidyl radicals remove hydrogen atoms from unactivated aliphatic C-H bonds. Although powerful, these transformations typically require oxidative N-prefunctionalization of the amide starting materials to achieve efficient amidyl generation. Moreover, because these N-activating groups are often incorporated into the final products, these methods are generally not amenable to the direct construction of carbon-carbon (C-C) bonds. Here we report an approach that overcomes these limitations by homolysing the N-H bonds of N-alkyl amides via proton-coupled electron transfer. In this protocol, an excited-state iridium photocatalyst and a weak phosphate base cooperatively serve to remove both a proton and an electron from an amide substrate in a concerted elementary step. The resultant amidyl radical intermediates are shown to promote subsequent C-H abstraction and radical alkylation steps. This C-H alkylation represents a catalytic variant of the Hofmann-Löffler-Freytag reaction, using simple, unfunctionalized amides to direct the formation of new C-C bonds. Given the prevalence of amides in pharmaceuticals and natural products, we anticipate that this method will simplify the synthesis and structural elaboration of amine-containing targets. Moreover, this study demonstrates that concerted proton-coupled electron transfer can enable homolytic activation of common organic functional groups that are energetically inaccessible using

  8. Oxidative esterification via photocatalytic C-H activation

    Science.gov (United States)

    Direct oxidative esterification of alcohol via photocatalytic C-H activation has been developed using VO@g-C3N4 catalyst; an expeditious esterification of alcohols occurs under neutral conditions using visible light as the source of energy.

  9. A steric tethering approach enables palladium-catalysed C-H activation of primary amino alcohols

    Science.gov (United States)

    Calleja, Jonas; Pla, Daniel; Gorman, Timothy W.; Domingo, Victoriano; Haffemayer, Benjamin; Gaunt, Matthew J.

    2015-12-01

    Aliphatic primary amines are a class of chemical feedstock essential to the synthesis of higher-order nitrogen-containing molecules, commonly found in biologically active compounds and pharmaceutical agents. New methods for the construction of complex amines remain a continuous challenge to synthetic chemists. Here, we outline a general palladium-catalysed strategy for the functionalization of aliphatic C-H bonds within amino alcohols, an important class of small molecule. Central to this strategy is the temporary conversion of catalytically incompatible primary amino alcohols into hindered secondary amines that are capable of undergoing a sterically promoted palladium-catalysed C-H activation. Furthermore, a hydrogen bond between amine and catalyst intensifies interactions around the palladium and orients the aliphatic amine substituents in an ideal geometry for C-H activation. This catalytic method directly transforms simple, easily accessible amines into highly substituted, functionally concentrated and structurally diverse products, and can streamline the synthesis of biologically important amine-containing molecules.

  10. Mechanism of catalytic functionalization of primary C-H bonds using a silylation strategy.

    Science.gov (United States)

    Parija, Abhishek; Sunoj, Raghavan B

    2013-08-16

    The mechanism of Ir-catalyzed γ-functionalization of a primary sp(3)(C-H) bond in 2-methyl cyclohexanol is examined using the density functional theory (M06). The nature of the active catalyst for the initial silylation of alcohol is identified as the monomer derived from [Ir(cod)OMe]2 while that for γ-sp(3)(C-H) activation leading to oxasilolane is [IrH(nbe)(phen)]. The rate-determining step is found to involve Si-C coupling through reductive elimination.

  11. C-H 键活化反应的密度泛函理论模拟对简化模型的评估%Density Functional Theoritical Studies on Catalytic C-H Activation Reaction:Problem of Truncated Model

    Institute of Scientific and Technical Information of China (English)

    张磊; 徐增平; 于皓宇; 方德彩

    2014-01-01

    Density functional theory method was employed to simulate a Rh(PPh3 ) 3 Cl catalyzed C-H activa-tion / C-C cross-coupling reaction, in which three typical processes, namely, C-H activation, migratory in-sertion and reductive elimination, were characterized. The obtained results show that the rate-determining step is migratory insertion with the free-energy barrier of 108. 3 kJ/ mol. In order to test the validation of truncated models, two small catalysts Rh(PMe3 ) 3 Cl and Rh(PH3 ) 3 Cl were also used to study the same coupling reac-tion. Our calculations suggested that truncated models led to misunderstanding of reaction mechanism and free-energy changes, especially for migratory insertion process, since the steric effect and entropic contribution play a great role on these types of reactions.%采用密度泛函理论方法,模拟了 Rh(PPh3)3 Cl 催化的 C-H 键活化/ C-C 键偶联反应.将反应机理分为 C-H 键活化、迁移插入和还原消除3个过程进行讨论.计算结果表明,势能面的最高点为迁移插入的过渡态,相对于初始原料的自由能为108.3 kJ/ mol.为了探索简化计算模型对模拟反应机理的影响,使用2种模型催化剂 Rh(PMe3)3 Cl 和 Rh(PH3)3 Cl 表征相同的反应过程,结果表明配体简化模型不合理,主要是因为 PPh3配体的空间效应和熵效应非常明显.

  12. Synthesis of a Benzodiazepine-derived Rhodium NHC Complex by C-H Bond Activation

    Energy Technology Data Exchange (ETDEWEB)

    Bergman, Roberg G.; Gribble, Jr., Michael W.; Ellman, Jonathan A.

    2008-01-30

    The synthesis and characterization of a Rh(I)-NHC complex generated by C-H activation of 1,4-benzodiazepine heterocycle are reported. This complex constitutes a rare example of a carbene tautomer of a 1,4-benzodiazepine aldimine stabilized by transition metal coordination and demonstrates the ability of the catalytically relevant RhCl(PCy{sub 3}){sub 2} fragment to induce NHC-forming tautomerization of heterocycles possessing a single carbene-stabilizing heteroatom. Implications for the synthesis of benzodiazepines and related pharmacophores via C-H functionalization are discussed.

  13. VTST/MT studies of the catalytic mechanism of C-H activation by transition metal complexes with [Cu2(μ-O2)], [Fe2(μ-O2)] and Fe(IV)-O cores based on DFT potential energy surfaces.

    Science.gov (United States)

    Kim, Yongho; Mai, Binh Khanh; Park, Sumin

    2017-04-01

    High-valent Cu and Fe species, which are generated from dioxygen activation in metalloenzymes, carry out the functionalization of strong C-H bonds. Understanding the atomic details of the catalytic mechanism has long been one of the main objectives of bioinorganic chemistry. Large H/D kinetic isotope effects (KIEs) were observed in the C-H activation by high-valent non-heme Cu or Fe complexes in enzymes and their synthetic models. The H/D KIE depends significantly on the transition state properties, such as structure, energies, frequencies, and shape of the potential energy surface, when the tunneling effect is large. Therefore, theoretical predictions of kinetic parameters such as rate constants and KIEs can provide a reliable link between atomic-level quantum mechanical mechanisms and experiments. The accurate prediction of the tunneling effect is essential to reproduce the kinetic parameters. The rate constants and HD/KIE have been calculated using the variational transition-state theory including multidimensional tunneling based on DFT potential energy surfaces along the reaction coordinate. Excellent agreement was observed between the predicted and experimental results, which assures the validity of the DFT potential energy surfaces and, therefore, the proposed atomic-level mechanisms. The [Cu2(μ-O)2], [Fe2(μ-O)2], and Fe(IV)-oxo species were employed for C-H activation, and their role as catalysts was discussed at an atomic level.

  14. Facile fabrication of magnetically recyclable metal-organic framework nanocomposites for highly efficient and selective catalytic oxidation of benzylic C-H bonds.

    Science.gov (United States)

    Chen, Yifa; Huang, Xianqiang; Feng, Xiao; Li, Jikun; Huang, Yingyu; Zhao, Jingshu; Guo, Yuexin; Dong, Xinmei; Han, Ruodan; Qi, Pengfei; Han, Yuzhen; Li, Haiwei; Hu, Changwen; Wang, Bo

    2014-08-07

    HKUST-1@Fe3O4 chemically bonded core-shell nanoparticles have been prepared by growing HKUST-1 thin layers joined by carboxyl groups onto Fe3O4 nanospheres. These magnetic core-shell MOF nanostructures show exceptional catalytic activity for the oxidation of benzylic C-H bonds and they can be recovered by magnetic separation and reused without losing any activity.

  15. Palladium-catalyzed C-H activation/intramolecular amination reaction: a new route to 3-aryl/alkylindazoles.

    Science.gov (United States)

    Inamoto, Kiyofumi; Saito, Tadataka; Katsuno, Mika; Sakamoto, Takao; Hiroya, Kou

    2007-07-19

    A method for the catalytic C-H activation of hydrazone compounds followed by intramolecular amination is described. It requires the use of a catalytic amount of Pd(OAc)2 in the presence of Cu(OAc)2 and AgOCOCF3, which efficiently effects the cyclization to afford variously substituted indazoles. The reactions proceed under relatively mild conditions and thus tolerate a variety of functional groups, including alkoxycarbonyl and cyano groups and halogen atoms.

  16. Graphene Oxide Catalyzed C-H Bond Activation: The Importance Oxygen Functional Groups for Biaryl Construction

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Yongjun; Tang, Pei; Zhou, Hu; Zhang, Wei; Yang, Hanjun; Yan, Ning; Hu, Gang; Mei, Donghai; Wang, Jianguo; Ma, Ding

    2016-02-24

    A heterogeneous, inexpensive and environment-friendly carbon catalytic system was developed for the C-H bond arylation of benzene resulting in the subsequent formation of biaryl compounds. The oxygen-containing groups on these graphene oxide sheets play an essential role in the observed catalytic activity. The catalytic results of model compounds and DFT calculations show that these functional groups promote this reaction by stabilization and activation of K ions at the same time of facilitating the leaving of I. And further mechanisms studies show that it is the charge induced capabilities of oxygen groups connected to specific carbon skeleton together with the giant π-reaction platform provided by the π-domain of graphene that played the vital roles in the observed excellent catalytic activity. D. Mei acknowledges the support from the US Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. Pacific Northwest National Laboratory (PNNL) is a multiprogram national laboratory operated for DOE by Battelle. Computing time was granted by the grand challenge of computational catalysis of the William R. Wiley Environmental Molecular Sciences Laboratory.

  17. C-H activation: Complex peptides made simple

    Science.gov (United States)

    Bartlett, Sean; Spring, David R.

    2017-01-01

    Nature oxidizes biosynthetic intermediates into structurally and functionally diverse peptides. An iron-catalysed C-H oxidation mimics this approach in the lab, enabling chemists to synthesize structural analogues with ease.

  18. Mechanistic Insight into the Rh(III)-Catalyzed C-H Activation of 2-Acetyl-1-Arythydrazines in Water.

    Science.gov (United States)

    Wu, Weirong; Liu, Tao; Huang, Caiyun; Zhang, Jing; Man, Xiaoping

    2017-03-02

    A mechanistic study of the Cp*Rh(III)-catalyzed C-H functionalization of 2-acetyl-1-arythydrazines with diazo compounds in water was carried out by using density functional theory calculations. The results reveal that the acetyl-bonded N-H deprotonation is prior to the phenyl C-H activation. The mechanisms from protonation by acetic acid disagree with the proposal by the Wang group. Different from the Rh(III)-catalyzed C-H activation reported by experimental literature, the rate-determining step of the whole catalytic cycle with an overall barrier of 31.7 kcal mol(-1) (IV → TS12-P') is the protonation process of hydroxy O rather than the C-H bond cleavage step. The present theoretical study rationalizes the experimental observation at the molecular level.

  19. Site-selective C-H arylation of primary aliphatic amines enabled by a catalytic transient directing group

    Science.gov (United States)

    Liu, Yongbing; Ge, Haibo

    2017-01-01

    Transition-metal-catalysed direct C-H bond functionalization of aliphatic amines is of great importance in organic and medicinal chemistry research. Several methods have been developed for the direct sp3 C-H functionalization of secondary and tertiary aliphatic amines, but site-selective functionalization of primary aliphatic amines in remote positions remains a challenge. Here, we report the direct, highly site-selective γ-arylation of primary alkylamines via a palladium-catalysed C-H bond functionalization process on unactivated sp3 carbons. Using glyoxylic acid as an inexpensive, catalytic and transient directing group, a wide array of γ-arylated primary alkylamines were prepared without any protection or deprotection steps. This approach provides straightforward access to important structural motifs in organic and medicinal chemistry without the need for pre-functionalized substrates or stoichiometric directing groups and is demonstrated here in the synthesis of analogues of the immunomodulatory drug fingolimod directly from commercially available 2-amino-2-propylpropane-1,3-diol.

  20. Iron-Carbonyl-Catalyzed Redox-Neutral [4+2] Annulation of N-H Imines and Internal Alkynes by C-H Bond Activation.

    Science.gov (United States)

    Jia, Teng; Zhao, Chongyang; He, Ruoyu; Chen, Hui; Wang, Congyang

    2016-04-18

    Stoichiometric C-H bond activation of arenes mediated by iron carbonyls was reported by Pauson as early as in 1965, yet the catalytic C-H transformations have not been developed. Herein, an iron-catalyzed annulation of N-H imines and internal alkynes to furnish cis-3,4-dihydroisoquinolines is described, and represents the first iron-carbonyl-catalyzed C-H activation reaction of arenes. Remarkablely, this is also the first redox-neutral [4+2] annulation of imines and alkynes proceeding by C-H activation. The reaction also features only cis stereoselectivity and excellent atom economy as neither base, nor external ligand, nor additive is required. Experimental and theoretical studies reveal an oxidative addition mechanism for C-H bond activation to afford a dinuclear ferracycle and a synergetic diiron-promoted H-transfer to the alkyne as the turnover-determining step.

  1. Oxidative esterification via photocatalytic C-H activation

    Data.gov (United States)

    U.S. Environmental Protection Agency — Direct oxidative esterification of alcohol via photocatalytic C–H activation has been developed using VO@g-C3N4 catalyst; an expeditious esterification of alcohols...

  2. Clean and Selective Catalytic C-H alkylation of Alkenes with Environmental friendly Alcohols

    KAUST Repository

    Poater, Albert

    2016-09-14

    Bearing the alkylation of alkene substrates using alcohol as solvent, catalysed by the cationic Ru-based catalyst [(C6H6)(PCy3)(CO)RuH]+, DFT calculations have been carried out to get mechanistic insights of such an environmental friendly reaction. Hard experimental conditions of Yi and coworkers [Science2011, 333, 1613] allow the formation of a C-C bond between indene and ethanol. The predicted mechanism suggests a cationic Ru-alkenyl species once two equivalents of indene interact releasing a molecule of indane subproduct. Then, oxidative addition of the Csingle bondO bond of alcohol to Ru-alkenyl species leads to Ru-alkenyl-alkyl species, followed by the reductive elimination process produces the desired alkylation product and a Ru-hydroxo complex. Finally, vinylic Csingle bondH activation and water elimination regenerates the Ru-alkenyl species. In this paper we present a full description of the complete reaction pathway along with possible alternative pathways, which are predicted to display higher upper barriers. Furthermore, the present study explains the possible reasons for the absence of undesired products such as indene dimer or hydroxylated indene in the experiments.

  3. Manganese(I)-Catalyzed Dispersion-Enabled C-H/C-C Activation.

    Science.gov (United States)

    Meyer, Tjark H; Liu, Weiping; Feldt, Milica; Wuttke, Axel; Mata, Ricardo A; Ackermann, Lutz

    2017-03-20

    C-H/C-C Functionalizations were achieved with the aid of a versatile manganese(I) catalyst. Thus, an organometallic manganese-catalyzed C-H activation set the stage for silver-free C-H/C-C transformations with ample substrate scope and excellent levels of chemo-, site-, and diastereo-selectivities. The robust nature of the manganese(I) catalysis regime was reflected by the first C-H/C-C functionalization on amino acids under racemization-free reaction conditions. Detailed experimental and computational mechanistic studies provided strong evidence for a facile C-H activation and a rate-determining C-C cleavage, with considerable contribution from London dispersion interactions.

  4. Direct Functionalization of Nitrogen Heterocycles via Rh-Catalyzed C-H Bond Activation

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, Jared; Bergman, Robert; Ellman, Jonathan

    2008-02-04

    Nitrogen heterocycles are present in many compounds of enormous practical importance, ranging from pharmaceutical agents and biological probes to electroactive materials. Direct funtionalization of nitrogen heterocycles through C-H bond activation constitutes a powerful means of regioselectively introducing a variety of substituents with diverse functional groups onto the heterocycle scaffold. Working together, our two groups have developed a family of Rh-catalyzed heterocycle alkylation and arylation reactions that are notable for their high level of functional-group compatibility. This Account describes their work in this area, emphasizing the relevant mechanistic insights that enabled synthetic advances and distinguished the resulting transformations from other methods. They initially discovered an intramolecular Rh-catalyzed C-2-alkylation of azoles by alkenyl groups. That reaction provided access to a number of di-, tri-, and tetracyclic azole derivatives. They then developed conditions that exploited microwave heating to expedite these reactions. While investigating the mechanism of this transformation, they discovered that a novel substrate-derived Rh-N-heterocyclic carbene (NHC) complex was involved as an intermediate. They then synthesized analogous Rh-NHC complexes directly by treating precursors to the intermediate [RhCl(PCy{sub 3}){sub 2}] with N-methylbenzimidazole, 3-methyl-3,4-dihydroquinazolein, and 1-methyl-1,4-benzodiazepine-2-one. Extensive kinetic analysis and DFT calculations supported a mechanism for carbene formation in which the catalytically active RhCl(PCy{sub 3}){sub 2} fragment coordinates to the heterocycle before intramolecular activation of the C-H bond occurs. The resulting Rh-H intermediate ultimately tautomerizes to the observed carbene complex. With this mechanistic information and the discovery that acid co-catalysts accelerate the alkylation, they developed conditions that efficiently and intermolecularly alkylate a variety of

  5. Direct functionalization of nitrogen heterocycles via Rh-catalyzed C-H bond activation.

    Science.gov (United States)

    Lewis, Jared C; Bergman, Robert G; Ellman, Jonathan A

    2008-08-01

    [Reaction: see text]. Nitrogen heterocycles are present in many compounds of enormous practical importance, ranging from pharmaceutical agents and biological probes to electroactive materials. Direct functionalization of nitrogen heterocycles through C-H bond activation constitutes a powerful means of regioselectively introducing a variety of substituents with diverse functional groups onto the heterocycle scaffold. Working together, our two groups have developed a family of Rh-catalyzed heterocycle alkylation and arylation reactions that are notable for their high level of functional-group compatibility. This Account describes our work in this area, emphasizing the relevant mechanistic insights that enabled synthetic advances and distinguished the resulting transformations from other methods. We initially discovered an intramolecular Rh-catalyzed C-2 alkylation of azoles by alkenyl groups. That reaction provided access to a number of di-, tri-, and tetracyclic azole derivatives. We then developed conditions that exploited microwave heating to expedite these reactions. While investigating the mechanism of this transformation, we discovered that a novel substrate-derived Rh- N-heterocyclic carbene (NHC) complex was involved as an intermediate. We then synthesized analogous Rh-NHC complexes directly by treating precursors to the intermediate [RhCl(PCy 3)2] with N-methylbenzimidazole, 3-methyl-3,4-dihydroquinazoline, and 1-methyl-1,4-benzodiazepine-2-one. Extensive kinetic analysis and DFT calculations supported a mechanism for carbene formation in which the catalytically active RhCl(PCy 3) 2 fragment coordinates to the heterocycle before intramolecular activation of the C-H bond occurs. The resulting Rh-H intermediate ultimately tautomerizes to the observed carbene complex. With this mechanistic information and the discovery that acid cocatalysts accelerate the alkylation, we developed conditions that efficiently and intermolecularly alkylate a variety of

  6. Reactivity of mononuclear alkylperoxo copper(II) complex. O-O bond cleavage and C-H bond activation.

    Science.gov (United States)

    Kunishita, Atsushi; Ishimaru, Hirohito; Nakashima, Satoru; Ogura, Takashi; Itoh, Shinobu

    2008-04-02

    A detailed reactivity study has been carried out for the first time on a new mononuclear alkylperoxo copper(II) complex, which is generated by the reaction of copper(II) complex supported by the bis(pyridylmethyl)amine tridentate ligand containing a phenyl group at the 6-position of the pyridine donor groups and cumene hydroperoxide (CmOOH) in CH3CN. The cumylperoxo copper(II) complex thus obtained has been found to undergo homolytic cleavage of the O-O bond and induce C-H bond activation of exogenous substrates, providing important insights into the catalytic mechanism of copper monooxygenases.

  7. Palladium-catalyzed meta-selective C-H bond activation with a nitrile-containing template: computational study on mechanism and origins of selectivity.

    Science.gov (United States)

    Yang, Yun-Fang; Cheng, Gui-Juan; Liu, Peng; Leow, Dasheng; Sun, Tian-Yu; Chen, Ping; Zhang, Xinhao; Yu, Jin-Quan; Wu, Yun-Dong; Houk, K N

    2014-01-08

    Density functional theory investigations have elucidated the mechanism and origins of meta-regioselectivity of Pd(II)-catalyzed C-H olefinations of toluene derivatives that employ a nitrile-containing template. The reaction proceeds through four major steps: C-H activation, alkene insertion, β-hydride elimination, and reductive elimination. The C-H activation step, which proceeds via a concerted metalation-deprotonation (CMD) pathway, is found to be the rate- and regioselectivity-determining step. For the crucial C-H activation, four possible active catalytic species-monomeric Pd(OAc)2, dimeric Pd2(OAc)4, heterodimeric PdAg(OAc)3, and trimeric Pd3(OAc)6-have been investigated. The computations indicated that the C-H activation with the nitrile-containing template occurs via a Pd-Ag heterodimeric transition state. The nitrile directing group coordinates with Ag while the Pd is placed adjacent to the meta-C-H bond in the transition state, leading to the observed high meta-selectivity. The Pd2(OAc)4 dimeric mechanism also leads to the meta-C-H activation product but with higher activation energies than the Pd-Ag heterodimeric mechanism. The Pd monomeric and trimeric mechanisms require much higher activation free energies and are predicted to give ortho products. Structural and distortion energy analysis of the transition states revealed significant effects of distortions of the template on mechanism and regioselectivity, which provided hints for further developments of new templates.

  8. Synthesis of Dihydropyridines and Pyridines from Imines and Alkynes via C-H Activation

    Energy Technology Data Exchange (ETDEWEB)

    Ellman, Jonathan A.; Colby, Denise; Bergman, Robert

    2007-11-20

    A convenient one-pot C-H alkenylation/electrocyclization/aromatization sequence has been developed for the synthesis of highly substituted pyridine derivatives from alkynes and {alpha},{beta}-unsaturated N-benzyl aldimines and ketimines that proceeds through dihydropyridine intermediates. A new class of ligands for C-H activation was developed, providing broader scope for the alkenylation step than could be achieved with previously reported ligands. Substantial information was obtained about the mechanism of the reaction. This included the isolation of a C-H activated complex and its structure determination by X-ray analysis; in addition, kinetic simulations using the Copasi software were employed to determine rate constants for this transformation, implicating facile C-H oxidative addition and slow reductive elimination steps.

  9. C-H bond activation of methane in aqueous solution: a hybrid quantum mechanical/effective fragment potential study.

    Science.gov (United States)

    Da Silva, Júlio C S; Rocha, Willian R

    2011-12-01

    In this study, we investigated the C-H bond activation of methane catalyzed by the complex [PtCl(4)](2-), using the hybrid quantum mechanical/effective fragment potential (EFP) approach. We analyzed the structures, energetic properties, and reaction mechanism involved in the elementary steps that compose the catalytic cycle of the Shilov reaction. Our B3LYP/SBKJC/cc-pVDZ/EFP results show that the methane activation may proceed through two pathways: (i) electrophilic addition or (ii) direct oxidative addition of the C-H bond of the alkane. The electrophilic addition pathway proceeds in two steps with formation of a σ-methane complex, with a Gibbs free energy barrier of 24.6 kcal mol(-1), followed by the cleavage of the C-H bond, with an energy barrier of 4.3 kcal mol(-1) . The activation Gibbs free energy, calculated for the methane uptake step was 24.6 kcal mol(-1), which is in good agreement with experimental value of 23.1 kcal mol(-1) obtained for a related system. The results shows that the activation of the C-H bond promoted by the [PtCl(4)](2-) catalyst in aqueous solution occurs through a direct oxidative addition of the C-H bond, in a single step, with an activation free energy of 25.2 kcal mol(-1), as the electrophilic addition pathway leads to the formation of a σ-methane intermediate that rapidly undergoes decomposition. The inclusion of long-range solvent effects with polarizable continuum model does not change the activation energies computed at the B3LYP/SBKJC/cc-pVDZ/EFP level of theory significantly, indicating that the large EFP water cluster used, obtained from Monte Carlo simulations and analysis of the center-of-mass radial pair distribution function, captures the most important solvent effects.

  10. Inserting CO2 into Aryl C-H Bonds of Metal-Organic Frameworks: CO2 Utilization for Direct Heterogeneous C-H Activation.

    Science.gov (United States)

    Gao, Wen-Yang; Wu, Haifan; Leng, Kunyue; Sun, Yinyong; Ma, Shengqian

    2016-04-25

    Described for the first time is that carbon dioxide (CO2 ) can be successfully inserted into aryl C-H bonds of the backbone of a metal-organic framework (MOF) to generate free carboxylate groups, which serve as Brønsted acid sites for efficiently catalyzing the methanolysis of epoxides. The work delineates the very first example of utilizing CO2 for heterogeneous C-H activation and carboxylation reactions on MOFs, and opens a new avenue for CO2 chemical transformations under mild reaction conditions.

  11. Direct 2-acetoxylation of quinoline N-oxides via copper catalyzed C-H bond activation.

    Science.gov (United States)

    Chen, Xuan; Zhu, Chongwei; Cui, Xiuling; Wu, Yangjie

    2013-08-07

    An efficient and direct 2-acetoxylation of quinoline N-oxides via copper(I) catalyzed C-H bond activation has been developed. This transformation was achieved using TBHP as an oxidant in the cross-dehydrogenative coupling (CDC) reaction of quinoline N-oxides with aldehydes, and provided a practical pathway to 2-acyloxyl quinolines.

  12. Rhodium(III)-Catalyzed C-H Activation Mediated Synthesis of Isoquinolones from Amides and Cyclopropenes.

    Science.gov (United States)

    Hyster, Todd K; Rovis, Tomislav

    2013-01-01

    We have developed a synthesis of 4-substituted isoquinolones from the Rh(III)-catalyzed, C-H activation mediated, coupling of O-pivaloyl benzhydroxamic acids and 3,3-disubstituted cyclopropenes. Experiments suggest the formation of a [4.1.0] bicyclic-system, which can open under acidic conditions to generate the desired isoquinolone.

  13. Time resolved infrared studies of C-H bond activation by organometallics

    Energy Technology Data Exchange (ETDEWEB)

    Asplund, M.C. [Univ. of California, Berkeley, CA (United States). Dept. of Chemistry]|[Lawrence Berkeley National Lab., CA (United States). Chemical Sciences Div.

    1998-06-01

    This work describes how step-scan Fourier Transform Infrared spectroscopy and visible and near infrared ultrafast lasers have been applied to the study of the photochemical activation of C-H bonds in organometallic systems, which allow for the selective breaking of C-H bonds in alkanes. The author has established the photochemical mechanism of C-H activation by Tp{sup *}Rh(CO){sub 2}(Tp{sup *} = HB-Pz{sup *}{sub 3}, Pz = 3,5-dimethylpyrazolyl) in alkane solution. The initially formed monocarbonyl forms a weak solvent complex, which undergoes a change in Tp{sup *} ligand connectivity. The final C-H bond breaking step occurs at different time scales depending on the structure of the alkane. In linear solvents, the time scale is <50 ns and cyclic alkanes is {approximately}200 ps. The reactivity of the Tp{sup *}Rh(CO){sub 2} system has also been studied in aromatic solvents. Here the reaction proceeds through two different pathways, with very different time scales. The first proceeds in a manner analogous to alkanes and takes <50 ns. The second proceeds through a Rh-C-C complex, and takes place on a time scale of 1.8 {micro}s.

  14. C-H bond activation by metal-superoxo species: what drives high reactivity?

    Science.gov (United States)

    Ansari, Azaj; Jayapal, Prabha; Rajaraman, Gopalan

    2015-01-01

    Metal-superoxo species are ubiquitous in metalloenzymes and bioinorganic chemistry and are known for their high reactivity and their ability to activate inert C-H bonds. The comparative oxidative abilities of M-O2(.-) species (M = Cr(III), Mn(III), Fe(III), and Cu(II)) towards C-H bond activation reaction are presented. These superoxo species generated by oxygen activation are found to be aggressive oxidants compared to their high-valent metal-oxo counterparts generated by O⋅⋅⋅O bond cleavage. Our calculations illustrate the superior oxidative abilities of Fe(III)- and Mn(III)-superoxo species compared to the others and suggest that the reactivity may be correlated to the magnetic exchange parameter.

  15. Catalytic activity of Au nanoparticles

    DEFF Research Database (Denmark)

    Larsen, Britt Hvolbæk; Janssens, Ton V.W.; Clausen, Bjerne

    2007-01-01

    Au is usually viewed as an inert metal, but surprisingly it has been found that Au nanoparticles less than 3–5 nm in diameter are catalytically active for several chemical reactions. We discuss the origin of this effect, focusing on the way in which the chemical activity of Au may change with par......Au is usually viewed as an inert metal, but surprisingly it has been found that Au nanoparticles less than 3–5 nm in diameter are catalytically active for several chemical reactions. We discuss the origin of this effect, focusing on the way in which the chemical activity of Au may change...... with particle size. We find that the fraction of low-coordinated Au atoms scales approximately with the catalytic activity, suggesting that atoms on the corners and edges of Au nanoparticles are the active sites. This effect is explained using density functional calculations....

  16. Selective molecular recognition, C-H bond activation, and catalysis in nanoscale reaction vessels

    Energy Technology Data Exchange (ETDEWEB)

    Fiedler, Dorothea; Leung, Dennis H.; Raymond, Kenneth N.; Bergman, Robert G.

    2004-11-27

    Supramolecular chemistry represents a way to mimic enzyme reactivity by using specially designed container molecules. We have shown that a chiral self-assembled M{sub 4}L{sub 6} supramolecular tetrahedron can encapsulate a variety of cationic guests, with varying degrees of stereoselectivity. Reactive iridium guests can be encapsulated and the C-H bond activation of aldehydes occurs, with the host cavity controlling the ability of substrates to interact with the metal center based upon size and shape. In addition, the host container can act as a catalyst by itself. By restricting reaction space and preorganizing the substrates into reactive conformations, it accelerates the sigmatropic rearrangement of enammonium cations.

  17. Understanding trends in C-H bond activation in heterogeneous catalysis

    Science.gov (United States)

    Latimer, Allegra A.; Kulkarni, Ambarish R.; Aljama, Hassan; Montoya, Joseph H.; Yoo, Jong Suk; Tsai, Charlie; Abild-Pedersen, Frank; Studt, Felix; Nørskov, Jens K.

    2016-10-01

    While the search for catalysts capable of directly converting methane to higher value commodity chemicals and liquid fuels has been active for over a century, a viable industrial process for selective methane activation has yet to be developed. Electronic structure calculations are playing an increasingly relevant role in this search, but large-scale materials screening efforts are hindered by computationally expensive transition state barrier calculations. The purpose of the present letter is twofold. First, we show that, for the wide range of catalysts that proceed via a radical intermediate, a unifying framework for predicting C-H activation barriers using a single universal descriptor can be established. Second, we combine this scaling approach with a thermodynamic analysis of active site formation to provide a map of methane activation rates. Our model successfully rationalizes the available empirical data and lays the foundation for future catalyst design strategies that transcend different catalyst classes.

  18. 2008 C. H. McCloy lecture. Social psychology and physical activity: back to the future.

    Science.gov (United States)

    Gill, Diane L

    2009-12-01

    In the early 1970s, both my academic career and the psychology subdiscipline within kinesiology began as "social psychology and physical activity. "Since then, sport and exercise psychology research has shifted away from the social to a narrower biopsycho-(no social) approach, and professional practice has focused on the elite rather than the larger public. Psychology can contribute to an integrative and relevant professional discipline by going back to the future as social psychology and physical activity and by incorporating three of C. H. McCloy's themes (a) evidence-based practice, (b) beyond dualisms, and (c) commitment to public service. Our scholarship must move beyond dualisms to recognize complexities and connections and be truly scholarship for practice. Social psychology and physical activity can serve the public by advocating for inclusive, empowering physical activity programs that promote health and well being for all.

  19. Catalytic Activation of Nitrogen Dioxide for Selective Synthesis of Nitroorganics

    Science.gov (United States)

    2015-01-15

    attack of NO2– at a methyl group in the FA9550-11-1-0253: Catalytic Activation of Nitrogen Dioxide for Selective Synthesis of Nitroorganics PI: Seth...They can be installed (generally as their pinacol esters) by efficient iridium -catalyzed undirected aryl C-H activation. They can then be used to...of ipso nitro-deboronation, in reasonable yields. Trichlorotris(pyridine) iridium (III) is the most selective catalyst for this reaction. The reaction

  20. Enhanced Reactivity in Hydrogen Atom Transfer from Tertiary Sites of Cyclohexanes and Decalins via Strain Release: Equatorial C-H Activation vs Axial C-H Deactivation.

    Science.gov (United States)

    Salamone, Michela; Ortega, Vanesa B; Bietti, Massimo

    2015-05-01

    Absolute rate constants for hydrogen atom transfer (HAT) from cycloalkanes and decalins to the cumyloxyl radical (CumO(•)) were measured by laser flash photolysis. Very similar reactivities were observed for the C-H bonds of cyclopentane and cyclohexane, while the tertiary C-H bond of methylcyclopentane was found to be 6 times more reactive than the tertiary axial C-H bond of methylcyclohexane, pointing toward a certain extent of tertiary axial C-H bond deactivation. Comparison between the cis and trans isomers of 1,2-dimethylcyclohexane, 1,4-dimethylcyclohexane and decalin provides a quantitative evaluation of the role played by strain release in these reactions. kH values for HAT from tertiary equatorial C-H bonds were found to be at least 1 order of magnitude higher than those for HAT from the corresponding tertiary axial C-H bonds (kH(eq)/kH(ax) = 10-14). The higher reactivity of tertiary equatorial C-H bonds was explained in terms of 1,3-diaxial strain release in the HAT transition state. Increase in torsional strain in the HAT transition state accounts instead for tertiary axial C-H bond deactivation. The results are compared with those obtained for the corresponding C-H functionalization reactions by dioxiranes and nonheme metal-oxo species indicating that CumO(•) can represent a convenient model for the reactivity patterns of these oxidants.

  1. Modification of Purine and Pyrimidine Nucleosides by Direct C-H Bond Activation

    Directory of Open Access Journals (Sweden)

    Yong Liang

    2015-03-01

    Full Text Available Transition metal-catalyzed modifications of the activated heterocyclic bases of nucleosides as well as DNA or RNA fragments employing traditional cross-coupling methods have been well-established in nucleic acid chemistry. This review covers advances in the area of cross-coupling reactions in which nucleosides are functionalized via direct activation of the C8-H bond in purine and the C5-H or C6-H bond in uracil bases. The review focuses on Pd/Cu-catalyzed couplings between unactivated nucleoside bases with aryl halides. It also discusses cross-dehydrogenative arylations and alkenylations as well as other reactions used for modification of nucleoside bases that avoid the use of organometallic precursors and involve direct C-H bond activation in at least one substrate. The scope and efficiency of these coupling reactions along with some mechanistic considerations are discussed.

  2. C-H-Activated Direct Arylation of Strong Benzothiadiazole and Quinoxaline-Based Electron Acceptors.

    Science.gov (United States)

    Zhang, Junxiang; Parker, Timothy C; Chen, Wayne; Williams, LaRita; Khrustalev, Victor N; Jucov, Evgheni V; Barlow, Stephen; Timofeeva, Tatiana V; Marder, Seth R

    2016-01-15

    Electron acceptors are important components of π-conjugated materials, but the strong electron-withdrawing properties of the required synthetic intermediates often make them poor substrates in synthetic schemes designed around conventional organometallic cross-coupling. Here, strong benzodiimine-based acceptors, including 5,6-difluoro[2,1,3]benzothiadiazole, 5,6-dicyano[2,1,3]benzothiadiazole, 5,6-dicyanobenzo[d][1,2,3]triazole, 6,7-dicyanoquinoxaline, and 6,7-dinitroquinoxaline, are shown to undergo facile palladium-catalyzed C-H direct arylation with a variety of bromoarenes in moderate to high yields. The electrochemical characteristics of di-2-thienyl derivatives synthesized using this methodology are compared and suggest that, in an electron-transfer sense, 5,6-dicyano[2,1,3]benzothiadiazole is a comparably strong acceptor to benzo[1,2-c:4,5-c']bis[1,2,5]thiadiazole. The synthetic results suggest that high electron-withdrawing ability, which has traditionally limited reaction yields and structural variety in organic electronic materials, may be advantageous when employing C-H activated direct arylation in certain circumstances.

  3. C-H activation of ethers by pyridine tethered PCsp3P-type iridium complexes.

    Science.gov (United States)

    Cui, Peng; Babbini, Dominic C; Iluc, Vlad M

    2016-06-14

    Iridium PCsp3P complexes featuring a novel bis(2-diphenylphosphinophenyl)-2-pyridylmethane ligand (PC(Py)HP) are reported. C-H activation reactions between the dihydride complex [(PC(Py)P)Ir(H)2] and tetrahydrofuran or methyl tert-butyl ether in the presence of a hydrogen acceptor, norbornene (NBE), at ambient temperature led exclusively to the hydrido oxyalkyl complexes, [(PC(Py)P)IrH(C4H7O)] and [(PC(Py)P)IrH(CH2O(t)Bu)], respectively. The internal pyridine donor is important and stabilizes these species by coordination to the iridium center. The coordination of pyridine to the iridium center is labile, however, and its dissociation occurs in the presence of a suitable substrate, as demonstrated by the intramolecular nucleophilic attack of pyridine on a vinylidene intermediate generated from PhC[triple bond, length as m-dash]CH.

  4. Heterogeneously porous γ-MnO₂-catalyzed direct oxidative amination of benzoxazole through C-H activation in the presence of O₂.

    Science.gov (United States)

    Pal, Provas; Giri, Arnab Kanti; Singh, Harshvardhan; Ghosh, Subhash Chandra; Panda, Asit Baran

    2014-09-01

    Oxidative amination of azoles through catalytic C-H bond activation is a very important reaction due to the presence of 2-aminoazoles in several biologically active compounds. However, most of the reported methods are performed under homogeneous reaction conditions using excess reagents and additives. Herein, we report the heterogeneous, porous γ-MnO2-catalyzed direct amination of benzoxazole with wide range of primary and secondary amines. The amination was carried under mild reaction conditions and using molecular oxygen as a green oxidant, without any additives. The catalyst can easily be separated by filtration and reused several times without a significant loss of its catalytic performance. Of note, the reaction tolerates a functional group such as alcohol, thus indicating the broad applicability of this reaction.

  5. Oxygenation via C-H/C-C Bond Activation with Molecular Oxygen.

    Science.gov (United States)

    Liang, Yu-Feng; Jiao, Ning

    2017-07-18

    The selective oxidation of organic molecules is a fundamentally important component of modern synthetic chemistry. In the past decades, direct oxidative C-H and C-C bond functionalization has proved to be one of the most efficient and straightforward methods to synthesize complex products from simple and readily available starting materials. Among these oxidative processes, the use of molecular oxygen as a green and sustainable oxidant has attracted considerable attention because of its highly atom-economical, abundant, and environmentally friendly characteristics. The development of new protocols using molecular oxygen as an ideal oxidant is highly desirable in oxidation chemistry. More importantly, the oxygenation reaction of simple molecules using molecular oxygen as the oxygen source offers one of the most ideal processes for the construction of O-containing compounds. Aerobic oxidation and oxygenation by enzymes, such as monooxygenase, tyrosinase, and dopamine β-monooxygenase, have been observed in some biological C-H bond hydroxylation processes. Encouraged by these biological transformations, transition-metal- or organocatalyst-catalyzed oxygenation through dioxygen activation has attracted academic and industrial prospects. In this Account, we describe some advances from our group in oxygenation via C-H/C-C bond activation with molecular oxygen as the oxidant and oxygen source for the synthesis of O-containing compounds. Under an atmosphere of O2 (1 atm) or air (1 atm), we have successfully incorporated one or two O atoms from O2 into simple and readily available substrates through C-H, C-C, C═C, and C≡C bond cleavage by transition-metal catalysis, organocatalysis, and photocatalysis. Moreover, we have devised cyclization reactions with molecular oxygen to construct O-heterocycles. Most of these transformations can tolerate a broad range of functional groups. Furthermore, on the basis of isotope labeling experiments, electron paramagnetic resonance

  6. Photolysis and thermolysis of bis(imino)pyridine cobalt azides: C-H activation from putative cobalt nitrido complexes.

    Science.gov (United States)

    Hojilla Atienza, Crisita Carmen; Bowman, Amanda C; Lobkovsky, Emil; Chirik, Paul J

    2010-11-24

    A series of planar aryl-substituted bis(imino)pyridine cobalt azide complexes were prepared and evaluated as synthetic precursors for the corresponding cobalt nitrido compounds. Thermolysis or photolysis of two examples resulted in intramolecular C-H activation of the benzylic positions of the aryl substituents. For the mesityl-substituted compound, C-H activation by the putative nitride resulted in formation of a neutral imine ligand and modification of the chelate by hydrogen transfer to the imine carbon.

  7. Anti-inflammatory activity of Arnica montana 6cH: preclinical study in animals.

    Science.gov (United States)

    Macêdo, S B; Ferreira, L R; Perazzo, F F; Carvalho, J C

    2004-04-01

    The anti-inflammatory effect of Arnica montana 6cH was evaluated using acute and chronic inflammation models. In the acute, model, carrageenin-induced rat paw oedema, the group treated with Arnica montana 6cH showed 30% inhibition compared to control (P < 0.05). Treatment with Arnica 6cH, 30 min prior to carrageenin, did not produce any inhibition of the inflammatory process. In the chronic model, Nystatin-induced oedema, the group treated 3 days previously with Arnica montana 6cH had reduced inflammation 6 h after the inflammatory agent was applied (P < 0.05). When treatment was given 6 h after Nystatin treatment, there was no significant inhibitory effect. In a model based on histamine-induced increase of vascular permeability, pretreatment with Arnica montana 6cH blocked the action of histamine in increasing vascular permeability.

  8. N-heterocyclic carbene gold(I) and copper(I) complexes in C-H bond activation.

    Science.gov (United States)

    Gaillard, Sylvain; Cazin, Catherine S J; Nolan, Steven P

    2012-06-19

    Environmental concerns have and will continue to have a significant role in determining how chemistry is carried out. Chemists will be challenged to develop new, efficient synthetic processes that have the fewest possible steps leading to a target molecule, the goal being to decrease the amount of waste generated and reduce energy use. Along this path, chemists will need to develop highly selective reactions with atom-economical pathways producing nontoxic byproduct. In this context, C-H bond activation and functionalization is an extremely attractive method. Indeed, for most organic transformations, the presence of a reactive functionality is required. In Total Synthesis, the "protection and deprotection" approach with such reactive groups limits the overall yield of the synthesis, involves the generation of significant chemical waste, costs energy, and in the end is not as green as one would hope. In turn, if a C-H bond functionalization were possible, instead of the use of a prefunctionalized version of the said C-H bond, the number of steps in a synthesis would obviously be reduced. In this case, the C-H bond can be viewed as a dormant functional group that can be activated when necessary during the synthetic strategy. One issue increasing the challenge of such a desired reaction is selectivity. The cleavage of a C-H bond (bond dissociation requires between 85 and 105 kcal/mol) necessitates a high-energy species, which could quickly become a drawback for the control of chemo-, regio-, and stereoselectivity. Transition metal catalysts are useful reagents for surmounting this problem; they can decrease the kinetic barrier of the reaction yet retain control over selectivity. Transition metal complexes also offer important versatility in having distinct pathways that can lead to activation of the C-H bond. An oxidative addition of the metal in the C-H bond, and a base-assisted metal-carbon bond formation in which the base can be coordinated (or not) to the metal

  9. Advancements in the Synthesis and Applications of Cationic N-Heterocycles through Transition Metal-Catalyzed C-H Activation.

    Science.gov (United States)

    Gandeepan, Parthasarathy; Cheng, Chien-Hong

    2016-02-18

    Cationic N-heterocycles are an important class of organic compounds largely present in natural and bioactive molecules. They are widely used as fluorescent dyes for biological studies, as well as in spectroscopic and microscopic methods. These compounds are key intermediates in many natural and pharmaceutical syntheses. They are also a potential candidate for organic light-emitting diodes (OLEDs). Because of these useful applications, the development of new methods for the synthesis of cationic N-heterocycles has received a lot of attention. In particular, many C-H activation methodologies that realize high step- and atom-economies toward these compounds have been developed. In this review, recent advancements in the synthesis and applications of cationic N-heterocycles through C-H activation reactions are summarized. The new C-H activation reactions described in this review are preferred over their classical analogs.

  10. C-H activation dependent Pd-catalyzed carbonylative coupling of (hetero)aryl bromides and polyfluoroarenes.

    Science.gov (United States)

    Lian, Zhong; Friis, Stig D; Skrydstrup, Troels

    2015-02-04

    The carbonylative coupling of aryl and heteroaryl bromides with polyfluoroarenes via palladium-catalyzed C-H activation is presented. This transformation proceeds efficiently at moderate reaction temperatures and does not require strong base or reactive intermediates. A near stoichiometric amount of CO is sufficient and the methodology can thus be easily expanded to include the preparation of [(13)C]-acyl labeled benzopolyfluorophenones.

  11. Rhodium(III)-catalyzed C-H activation/annulation with vinyl esters as an acetylene equivalent.

    Science.gov (United States)

    Webb, Nicola J; Marsden, Stephen P; Raw, Steven A

    2014-09-19

    The behavior of electron-rich alkenes in rhodium-catalyzed C-H activation/annulation reactions is investigated. Vinyl acetate emerges as a convenient acetylene equivalent, facilitating the synthesis of sixteen 3,4-unsubstituted isoquinolones, as well as select heteroaryl-fused pyridones. The complementary regiochemical preferences of enol ethers versus enol esters/enamides is discussed.

  12. Consequences of metal-oxide interconversion for C-H bond activation during CH4 reactions on Pd catalysts.

    Science.gov (United States)

    Chin, Ya-Huei Cathy; Buda, Corneliu; Neurock, Matthew; Iglesia, Enrique

    2013-10-16

    Mechanistic assessments based on kinetic and isotopic methods combined with density functional theory are used to probe the diverse pathways by which C-H bonds in CH4 react on bare Pd clusters, Pd cluster surfaces saturated with chemisorbed oxygen (O*), and PdO clusters. C-H activation routes change from oxidative addition to H-abstraction and then to σ-bond metathesis with increasing O-content, as active sites evolve from metal atom pairs (*-*) to oxygen atom (O*-O*) pairs and ultimately to Pd cation-lattice oxygen pairs (Pd(2+)-O(2-)) in PdO. The charges in the CH3 and H moieties along the reaction coordinate depend on the accessibility and chemical state of the Pd and O centers involved. Homolytic C-H dissociation prevails on bare (*-*) and O*-covered surfaces (O*-O*), while C-H bonds cleave heterolytically on Pd(2+)-O(2-) pairs at PdO surfaces. On bare surfaces, C-H bonds cleave via oxidative addition, involving Pd atom insertion into the C-H bond with electron backdonation from Pd to C-H antibonding states and the formation of tight three-center (H3C···Pd···H)(‡) transition states. On O*-saturated Pd surfaces, C-H bonds cleave homolytically on O*-O* pairs to form radical-like CH3 species and nearly formed O-H bonds at a transition state (O*···CH3(•)···*OH)(‡) that is looser and higher in enthalpy than on bare Pd surfaces. On PdO surfaces, site pairs consisting of exposed Pd(2+) and vicinal O(2-), Pd(ox)-O(ox), cleave C-H bonds heterolytically via σ-bond metathesis, with Pd(2+) adding to the C-H bond, while O(2-) abstracts the H-atom to form a four-center (H3C(δ-)···Pd(ox)···H(δ+)···O(ox))(‡) transition state without detectable Pd(ox) reduction. The latter is much more stable than transition states on *-* and O*-O* pairs and give rise to a large increase in CH4 oxidation turnover rates at oxygen chemical potentials leading to Pd to PdO transitions. These distinct mechanistic pathways for C-H bond activation, inferred from theory

  13. Computational Mechanistic Study of Redox-Neutral Rh(III)-Catalyzed C-H Activation Reactions of Arylnitrones with Alkynes: Role of Noncovalent Interactions in Controlling Selectivity.

    Science.gov (United States)

    Xing, Yang-Yang; Liu, Jian-Biao; Tian, Ying-Ying; Sun, Chuan-Zhi; Huang, Fang; Chen, De-Zhan

    2016-11-23

    The mechanism of redox-neutral Rh(III)-catalyzed coupling reactions of arylnitrones with alkynes was investigated by density functional theory (DFT) calculations. The free energy profiles associated with the catalytic cycle, involving C(sp(2))-H activation, insertion of alkyne, transfer of O atom, cyclization and protodemetalation, are presented and analyzed. An overwhelming preference for alkyne insertion into Rh-C over Rh-O is observed among all pathways, and the most favorable route is determined. The pivalate-assisted C-H activation step is turnover-limiting, and the cyclization step determines the diastereoselectivity of the reaction, with the stereoselectivity arising mainly from the difference of noncovalent interactions in key transition states. The detailed mechanism of O atom transfer, Rh(III)-Rh(I)-Rh(III) versus Rh(III)-Rh(V)-Rh(III) cycle, is discussed.

  14. Rhodium-Catalyzed C-C Bond Formation via Heteroatom-Directed C-H Bond Activation

    Energy Technology Data Exchange (ETDEWEB)

    Colby, Denise; Bergman, Robert; Ellman, Jonathan

    2010-05-13

    Once considered the 'holy grail' of organometallic chemistry, synthetically useful reactions employing C-H bond activation have increasingly been developed and applied to natural product and drug synthesis over the past decade. The ubiquity and relative low cost of hydrocarbons makes C-H bond functionalization an attractive alternative to classical C-C bond forming reactions such as cross-coupling, which require organohalides and organometallic reagents. In addition to providing an atom economical alternative to standard cross - coupling strategies, C-H bond functionalization also reduces the production of toxic by-products, thereby contributing to the growing field of reactions with decreased environmental impact. In the area of C-C bond forming reactions that proceed via a C-H activation mechanism, rhodium catalysts stand out for their functional group tolerance and wide range of synthetic utility. Over the course of the last decade, many Rh-catalyzed methods for heteroatom-directed C-H bond functionalization have been reported and will be the focus of this review. Material appearing in the literature prior to 2001 has been reviewed previously and will only be introduced as background when necessary. The synthesis of complex molecules from relatively simple precursors has long been a goal for many organic chemists. The ability to selectively functionalize a molecule with minimal pre-activation can streamline syntheses and expand the opportunities to explore the utility of complex molecules in areas ranging from the pharmaceutical industry to materials science. Indeed, the issue of selectivity is paramount in the development of all C-H bond functionalization methods. Several groups have developed elegant approaches towards achieving selectivity in molecules that possess many sterically and electronically similar C-H bonds. Many of these approaches are discussed in detail in the accompanying articles in this special issue of Chemical Reviews. One approach

  15. Oxygen activation and intramolecular C-H bond activation by an amidate-bridged diiron(II) complex.

    Science.gov (United States)

    Jones, Matthew B; Hardcastle, Kenneth I; Hagen, Karl S; MacBeth, Cora E

    2011-07-18

    A diiron(II) complex containing two μ-1,3-(κN:κO)-amidate linkages has been synthesized using the 2,2',2''-tris(isobutyrylamido)triphenylamine (H(3)L(iPr)) ligand. The resulting diiron complex, 1, reacts with dioxygen (or iodosylbenzene) to effect intramolecular C-H bond activation at the methine position of the ligand isopropyl group. The ligand-activated product, 2, has been isolated and characterized by a variety of methods including X-ray crystallography. Electrospray ionization mass spectroscopy of 2 prepared from(18)O(2) was used to confirm that the oxygen atom incorporated into the ligand framework is derived from molecular oxygen.

  16. C-H bond activation of benzene by unsaturated η2-cyclopropene and η2-benzyne complexes of niobium.

    Science.gov (United States)

    Boulho, Cédric; Oulié, Pascal; Vendier, Laure; Etienne, Michel; Pimienta, Véronique; Locati, Abel; Bessac, Fabienne; Maseras, Feliu; Pantazis, Dimitrios A; McGrady, John E

    2010-10-13

    We report the synthesis of a niobium cyclopropyl complex, Tp(Me2)NbMe(c-C(3)H(5))(MeCCMe), and show that thermal loss of methane from this compound generates an intermediate that is capable of activating both aliphatic and aromatic C-H bonds. Isotopic labeling, trapping studies, a detailed kinetic analysis, and density functional theory all suggest that the active intermediate is an η(2)-cyclopropene complex formed via β-hydrogen abstraction rather than an isomeric cyclopropylidene species. C-H activation chemistry of this type represents a rather unusual reactivity pattern for η(2)-alkene complexes but is favored in this case by the strain in the C(3) ring which prevents the decomposition of the key intermediate via loss of cyclopropene.

  17. Interplay of Electronic Cooperativity and Exchange Coupling in Regulating the Reactivity of Diiron(IV)-oxo Complexes towards C-H and O-H Bond Activation.

    Science.gov (United States)

    Ansari, Azaj; Ansari, Mursaleem; Singha, Asmita; Rajaraman, Gopalan

    2017-07-26

    Activation of inert C-H bonds such as those of methane are extremely challenging for chemists but in nature, the soluble methane monooxygenase (sMMO) enzyme readily oxidizes methane to methanol by using a diiron(IV) species. This has prompted chemists to look for similar model systems. Recently, a (μ-oxo)bis(μ-carboxamido)diiron(IV) ([Fe(IV)2 O(L)2 ](2+) L=N,N-bis-(3',5'-dimethyl-4'-methoxypyridyl-2'-methyl)-N'-acetyl-1,2-diaminoethane) complex has been generated by bulk electrolysis and this species activates inert C-H bonds almost 1000 times faster than mononuclear Fe(IV) =O species and at the same time selectively activates O-H bonds of alcohols. The very high reactivity and selectivity of this species is puzzling and herein we use extensive DFT calculations to shed light on this aspect. We have studied the electronic and spectral features of diiron {Fe(III) -μ(O)-Fe(III) }(+2) (complex I), {Fe(III) -μ(O)-Fe(IV) }(+3) (II), and {Fe(IV) -μ(O)-Fe(IV) }(+4) (III) complexes. Strong antiferromagnetic coupling between the Fe centers leads to spin-coupled S=0, S=3/2, and S=0 ground state for species I-III respectively. The mechanistic study of the C-H and O-H bond activation reveals a multistate reactivity scenario where C-H bond activation is found to occur through the S=4 spin-coupled state corresponding to the high-spin state of individual Fe(IV) centers. The O-H bond activation on the other hand, occurs through the S=2 spin-coupled state corresponding to an intermediate state of individual Fe(IV) centers. Molecular orbital analysis reveals σ-π/π-π channels for the reactivity. The nature of the magnetic exchange interaction is found to be switched during the course of the reaction and this offers lower energy pathways. Significant electronic cooperativity between two metal centers during the course of the reaction has been witnessed and this uncovers the reason behind the efficiency and selectivity observed. The catalyst is found to prudently choose the

  18. Ru(ii)-Catalyzed C-H activation and annulation of salicylaldehydes with monosubstituted and disubstituted alkynes.

    Science.gov (United States)

    Baruah, Swagata; Kaishap, Partha Pratim; Gogoi, Sanjib

    2016-10-27

    The Ru(ii)-catalyzed C-H activation and annulation reaction of salicylaldehydes and disubstituted alkynes affords chromones in high yields. This reaction also works with terminal alkynes and tolerates a wide range of sensitive functional groups. The selectivity pattern of this Ru(ii)-catalyzed annulation reaction is different from the known Au(i), Rh(iii)-catalyzed annulation reactions of salicylaldehydes and terminal alkynes.

  19. Enantioselective Intramolecular Hydroarylation of Alkenes via Directed C-H Bond Activation

    Energy Technology Data Exchange (ETDEWEB)

    Harada, Hitoshi; Thalji, Reema; Bergman, Robert; Ellman, Jonathan

    2008-05-22

    Highly enantioselective catalytic intramolecular ortho-alkylation of aromatic imines containing alkenyl groups tethered at the meta position relative to the imine directing group has been achieved using [RhCl(coe){sub 2}]{sub 2} and chiral phosphoramidite ligands. Cyclization of substrates containing 1,1- and 1,2-disubstituted as well as trisubstituted alkenes were achieved with enantioselectivities >90% ee for each substrate class. Cyclization of substrates with Z-alkene isomers proceeded much more efficiently than substrates with E-alkene isomers. This further enabled the highly stereoselective intramolecular alkylation of certain substrates containing Z/E-alkene mixtures via a Rh-catalyzed alkene isomerization with preferential cyclization of the Z-isomer.

  20. Enantioselective Intramolecular Hydroarylation of Alkenes via Directed C-H Bond Activation

    Energy Technology Data Exchange (ETDEWEB)

    Harada, Hitoshi; Thalji, Reema; Bergman, Robert; Ellman, Jonathan

    2008-05-22

    Highly enantioselective catalytic intramolecular ortho-alkylation of aromatic imines containing alkenyl groups tethered at the meta position relative to the imine directing group has been achieved using [RhCl(coe){sub 2}]{sub 2} and chiral phosphoramidite ligands. Cyclization of substrates containing 1,1- and 1,2-disubstituted as well as trisubstituted alkenes were achieved with enantioselectivities >90% ee for each substrate class. Cyclization of substrates with Z-alkene isomers proceeded much more efficiently than substrates with E-alkene isomers. This further enabled the highly stereoselective intramolecular alkylation of certain substrates containing Z/E-alkene mixtures via a Rh-catalyzed alkene isomerization with preferential cyclization of the Z-isomer.

  1. Direct Synthesis of Protoberberine Alkaloids by Rh-Catalyzed C-H Bond Activation as the Key Step.

    Science.gov (United States)

    Jayakumar, Jayachandran; Cheng, Chien-Hong

    2016-01-26

    A one-pot reaction of substituted benzaldehydes with alkyne-amines by a Rh-catalyzed C-H activation and annulation to afford various natural and unnatural protoberberine alkaloids is reported. This reaction provides a convenient route for the generation of a compound library of protoberberine salts, which recently have attracted great attention because of their diverse biological activities. In addition, pyridinium salt derivatives can also be formed in good yields from α,β-unsaturated aldehydes and amino-alkynes. This reaction proceeds with excellent regioselectivity and good functional group compatibility under mild reaction conditions by using O2 as the oxidant.

  2. Mechanism of cooperative catalysis in a Lewis acid promoted nickel-catalyzed dual C-H activation reaction.

    Science.gov (United States)

    Anand, Megha; Sunoj, Raghavan B

    2012-09-07

    The mechanism of cooperativity offered by AlMe(3) in a Ni-catalyzed dehydrogenative cycloaddition between substituted formamides and an alkyne is investigated by using DFT(SMD(toluene)/M06/6-31G**) methods. The preferred pathway is identified to involve dual C-H activation, with first a higher barrier formyl C(sp(2))-H oxidative insertion followed by benzylic methyl C(sp(3))-H activation. The cooperativity is traced to be of kinetic origin as evidenced by stabilized transition states when AlMe(3) is bound to the formyl group, particularly in the oxidative insertion step.

  3. Catalytic C-H imidation of aromatic cores of functional molecules: ligand-accelerated Cu catalysis and application to materials- and biology-oriented aromatics.

    Science.gov (United States)

    Kawakami, Takahiro; Murakami, Kei; Itami, Kenichiro

    2015-02-25

    Versatile imidation of aromatic C-H bonds was accomplished. In the presence of copper bromide and 6,6'-dimethyl-2,2'-bipyridyl, a range of aromatics, such as polycyclic aromatic hydrocarbons, aromatic bowls, porphyrins, heteroaromatics, and natural products, can be imidated by N-fluorobenzenesulfonimide. A dramatic ligand-accelerated copper catalysis and an interesting kinetic profile were uncovered.

  4. 2009 C. H. McCloy Lecture. Seeing Is Believing: Observing Physical Activity and Its Contexts

    Science.gov (United States)

    McKenzie, Thomas L.

    2010-01-01

    Direct (systematic) observation has been a mainstay of my research for over three decades. I believe it is an important tool for assessing physical activity, because it can simultaneously provide contextually rich data on the setting in which the activity occurs. It is particularly useful for those interested in using ecological and…

  5. C-H Bond Activation by Early Transition Metal Carbide Cluster Anion MoC3 (-).

    Science.gov (United States)

    Li, Zi-Yu; Hu, Lianrui; Liu, Qing-Yu; Ning, Chuan-Gang; Chen, Hui; He, Sheng-Gui; Yao, Jiannian

    2015-12-01

    Although early transition metal (ETM) carbides can activate CH bonds in condensed-phase systems, the electronic-level mechanism is unclear. Atomic clusters are ideal model systems for understanding the mechanisms of bond activation. For the first time, CH activation of a simple alkane (ethane) by an ETM carbide cluster anion (MoC3 (-) ) under thermal-collision conditions has been identified by using high-resolution mass spectrometry, photoelectron imaging spectroscopy, and high-level quantum chemical calculations. Dehydrogenation and ethene elimination were observed in the reaction of MoC3 (-) with C2 H6 . The CH activation follows a mechanism of oxidative addition that is much more favorable in the carbon-stabilized low-spin ground electronic state than in the high-spin excited state. The reaction efficiency between the MoC3 (-) anion and C2 H6 is low (0.23±0.05) %. A comparison between the anionic and a highly efficient cationic reaction system (Pt(+) +C2 H6 ) was made. It turned out that the potential-energy surfaces for the entrance channels of the anionic and cationic reaction systems can be very different. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Probing the limits of ligand steric bulk: backbone C-H activation in a saturated N-heterocyclic carbene.

    Science.gov (United States)

    Phillips, Nicholas; Tirfoin, Remi; Aldridge, Simon

    2014-03-24

    The consequences of extremely high steric loading have been probed for late transition metal complexes featuring the expanded ring N-heterocyclic carbene 6-Dipp. The reluctance of this ligand to form 2:1 complexes with d-block metals (rationalised on the basis of its percentage buried volume, % Vbur , of 50.8%) leads to C-H and C-N bond activation processes driven by attack at the backbone β-CH2 unit. In the presence of Ir(I) (or indeed H(+) ) the net result is the formation of an allyl formamidine fragment, while Au(I) brings about an additional ring (re-)closure step via nucleophilic attack at the coordinated alkene. The net transformation of 6-Dipp in the presence of [(6-Dipp)Au](+) represents to our knowledge the first example of backbone C-H activation of a saturated N-heterocyclic carbene, proceeding in this case via a mechanism which involves free carbene in addition to the Au(I) centre. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Tip-induced C-H activation and oligomerization of thienoanthracenes.

    Science.gov (United States)

    Dinca, L E; MacLeod, J M; Lipton-Duffin, J; Fu, C; Ma, D; Perepichka, D F; Rosei, F

    2014-08-14

    The tip of a scanning tunneling microscope (STM) can be used to dehydrogenate freely-diffusing tetrathienoanthracene (TTA) molecules on Cu(111), trapping the molecules into metal-coordinated oligomeric structures. The process proceeds at bias voltages above ~3 V and produces organometallic structures identical to those resulting from the thermally-activated cross-coupling of a halogenated analogue. The process appears to be substrate dependent: no oligomerization was observed on Ag(111) or HOPG. This approach demonstrates the possibility of controlled synthesis and nanoscale patterning of 2D oligomer structures on selected surfaces.

  8. Reactivity control of C-H bond activation over vanadium-silver bimetallic oxide cluster cations.

    Science.gov (United States)

    Li, Xiao-Na; Wu, Xiao-Nan; Ding, Xun-Lei; Xu, Bo; He, Sheng-Gui

    2012-08-27

    Vanadium-silver bimetallic oxide cluster ions (V(x)Ag(y)O(z)(+); x=1-4, y=1-4, z=3-11) are produced by laser ablation and reacted with ethane in a fast-flow reactor. A reflectron time of flight (Re-TOF) mass spectrometer is used to detect the cluster distribution before and after the reactions. Hydrogen atom abstraction (HAA) reactions are identified over VAgO(3)(+), V(2)Ag(2)O(6)(+), V(2)Ag(4)O(7)(+), V(3)AgO(8)(+), V(3)Ag(3)O(9)(+), and V(4)Ag(2)O(11)(+) ions, in which the oxygen-centered radicals terminally bonded on V atoms are active sites for the facile HAA reactions. DFT calculations are performed to study the structures, bonding, and reactivity. The reaction mechanisms of V(2)Ag(2)O(6)(+) +C(2)H(6) are also given. The doped Ag atoms with a valence state of +1 are highly dispersed at the periphery of the V(x)Ag(y)O(z)(+) cluster ions. The reactivity can be well-tuned gradually by controlling the number of Ag atoms. The steric protection due to the peripherally bonded Ag atoms greatly enhances the selectivity of the V-Ag bimetallic oxide clusters with respect to the corresponding pure vanadium oxide systems. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Palladium Catalyzed Allylic C-H Alkylation: A Mechanistic Perspective

    Directory of Open Access Journals (Sweden)

    Casper Junker Engelin

    2011-01-01

    Full Text Available The atom-efficiency of one of the most widely used catalytic reactions for forging C-C bonds, the Tsuji-Trost reaction, is limited by the need of preoxidized reagents. This limitation can be overcome by utilization of the recently discovered palladium-catalyzed C-H activation, the allylic C-H alkylation reaction which is the topic of the current review. Particular emphasis is put on current mechanistic proposals for the three reaction types comprising the overall transformation: C-H activation, nucleophillic addition, and re-oxidation of the active catalyst. Recent advances in C-H bond activation are highlighted with emphasis on those leading to C-C bond formation, but where it was deemed necessary for the general understanding of the process closely related C-H oxidations and aminations are also included. It is found that C-H cleavage is most likely achieved by ligand participation which could involve an acetate ion coordinated to Pd. Several of the reported systems rely on benzoquinone for re-oxidation of the active catalyst. The scope for nucleophilic addition in allylic C-H alkylation is currently limited, due to demands on pKa of the nucleophile. This limitation could be due to the pH dependence of the benzoquinone/hydroquinone redox couple. Alternative methods for re-oxidation that does not rely on benzoquinone could be able to alleviate this limitation.

  10. Bipodal surface organometallic complexes with surface N-donor ligands and application to the catalytic cleavage of C-H and C-C bonds in n -Butane

    KAUST Repository

    Bendjeriou-Sedjerari, Anissa

    2013-11-27

    We present a new generation of "true vicinal" functions well-distributed on the inner surface of SBA15: [(Sî - Si-NH 2)(≡Si-OH)] (1) and [(≡Si-NH2)2] (2). From these amine-modified SBA15s, two new well-defined surface organometallic species [(≡Si-NH-)(≡Si-O-)]Zr(CH2tBu) 2 (3) and [(≡Si-NH-)2]Zr(CH2tBu) 2 (4) have been obtained by reaction with Zr(CH2tBu) 4. The surfaces were characterized with 2D multiple-quantum 1H-1H NMR and infrared spectroscopies. Energy-filtered transmission electron microscopy (EFTEM), mass balance, and elemental analysis unambiguously proved that Zr(CH2tBu)4 reacts with these vicinal amine-modified surfaces to give mainly bipodal bis(neopentyl)zirconium complexes (3) and (4), uniformly distributed in the channels of SBA15. (3) and (4) react with hydrogen to give the homologous hydrides (5) and (6). Hydrogenolysis of n-butane catalyzed by these hydrides was carried out at low temperature (100 C) and low pressure (1 atm). While (6) exhibits a bis(silylamido)zirconium bishydride, [(≡Si-NH-)2]Zr(H) 2 (6a) (60%), and a bis(silylamido)silyloxozirconium monohydride, [(≡Si-NH-)2(≡Si-O-)]ZrH (6b) (40%), (5) displays a new surface organometallic complex characterized by an 1H NMR signal at 14.46 ppm. The latter is assigned to a (silylimido)(silyloxo)zirconium monohydride, [(≡Si-Nî)(≡Si-O-)]ZrH (5b) (30%), coexistent with a (silylamido)(silyloxo)zirconium bishydride, [(≡Si-NH-)(≡Si-O-)] Zr(H)2 (5a) (45%), and a silylamidobis(silyloxo)zirconium monohydride, [(≡Si-NH-)(≡Si-O-)2]ZrH (5c) (25%). Surprisingly, nitrogen surface ligands possess catalytic properties already encountered with silicon oxide surfaces, but interestingly, catalyst (5) with chelating [N,O] shows better activity than (6) with chelating [N,N]. © 2013 American Chemical Society.

  11. Negative catalytic effect of water on the reactivity of hydrogen abstraction from the C-H bond of dimethyl ether by deuterium atoms through tunneling at low temperatures

    Science.gov (United States)

    Oba, Yasuhiro; Watanabe, Naoki; Kouchi, Akira

    2016-10-01

    We report an experimental study on the catalytic effect of solid water on the reactivity of hydrogen abstraction (H-abstraction) from dimethyl ether (DME) in the low-temperature solid DME-H2O complex. When DME reacted with deuterium atoms on a surface at 15-25 K, it was efficiently deuterated via successive tunneling H-abstraction and deuterium (D)-addition reactions. The 'effective' rate constant for DME-H2O + D was found to be about 20 times smaller than that of pure DME + D. This provides the first evidence that the presence of solid water has a negative catalytic effect on tunneling H-abstraction reactions.

  12. Iridium-catalyzed [3 + 2] annulation of cyclic N-sulfonyl ketimines with 1,3-dienes via C-H activation.

    Science.gov (United States)

    Nishimura, Takahiro; Ebe, Yusuke; Hayashi, Tamio

    2013-02-13

    Ir-catalyzed [3 + 2] annulation of cyclic N-sulfonyl ketimines with 1,3-dienes, in which an aryliridium intermediate is formed via C-H activation, gives aminoindane derivatives in high yields with high regio- and diastereoselectivity.

  13. Overcoming the Limitations of C-H Activation with Strongly Coordinating N-Heterocycles by Cobalt Catalysis.

    Science.gov (United States)

    Wang, Hui; Lorion, Mélanie M; Ackermann, Lutz

    2016-08-22

    Strongly coordinating nitrogen heterocycles, including pyrimidines, oxazolines, pyrazoles, and pyridines, were fully tolerated in cobalt-catalyzed C-H amidations by imidate assistance. Structurally complex quinazolines are thus accessible in a step-economic manner. Our findings also establish the relative powers of directing groups in cobalt(III)-catalyzed C-H functionalization for the first time.

  14. Non-innocent additives in a palladium(II)-catalyzed C-H bond activation reaction: insights into multimetallic active catalysts.

    Science.gov (United States)

    Anand, Megha; Sunoj, Raghavan B; Schaefer, Henry F

    2014-04-16

    The role of a widely employed additive (AgOAc) in a palladium acetate-catalyzed ortho-C-H bond activation reaction has been examined using the M06 density functional theory. A new hetero-bimetallic Pd-(μ-OAc)3-Ag is identified as the most likely active species. This finding could have far-reaching implications with respect to the notion of the active species in palladium catalysis in the presence of other metal salt additives.

  15. Ruthenium(II)-catalyzed synthesis of pyrrole- and indole-fused isocoumarins by C-H bond activation in DMF and water

    Digital Repository Service at National Institute of Oceanography (India)

    Singh, K.S.; Sawant, S.G.; Dixneuf, P.H.

    -C-H bond activation offer efficient routes for a fast access to various functional molecules.[12] Initially palladium catalysts were used for the direct C-H functionalization of heterocycles,[13,14] however tremendous progress has been made..., in terms of synthesis efficiency,atom economy and process cost, with the less expensive ruthenium(0)[15] and especially the more stable, even in water, ruthenium(II)catalysts[16--17]for cross C- C bond formation fromsp2C-H bonds.A wide range of N...

  16. Computational rationalization of the selective C-H and C-F activations of fluoroaromatic imines and ketones by cobalt complexes.

    Science.gov (United States)

    Li, Jingjing; Zhang, Dongju; Sun, Hongjian; Li, Xiaoyan

    2014-03-28

    While selective C-H and C-F activations of fluoroaromatic imines and ketones with transition metal complexes supported by PMe3 have been successfully achieved in recent publications, insight into the molecular mechanism and energetics of those reactions is still lacking. Focusing on three typical substrates, 2,6-difluorobenzophenone imine (A) and 2,6-difluorobenzophenone (B), and 2,4'-difluorobenzophenone (C), the present work theoretically studied their C-H and C-F cyclometalation reactions promoted by the activator Co(PMe3)4 or CoMe(PMe3)4. It is found that reaction A + Co(PMe3)4 favors the C-F activation, reaction A + CoMe(PMe3)4 prefers the C-H activation, whereas both the C-H and C-F activation pathways may be viable for reactions B + CoMe(PMe3)4 and C + CoMe(PMe3)4. The experimentally observed C-H and C-F cyclometalation products have been rationalized by analyzing the thermodynamic and kinetic properties of two activation pathways. From calculated results combined with the experimental observations, we believe that three factors, i.e. the oxidation state of the metal center in the activators, the anchoring group of substrates, and substituted fluoroatom counts of the aromatic ring in substrates, affect the selectivity of C-H and C-F activations of fluoroaromatic ketones and imines. Calculated results are enlightening about the rational design of activators and substrates of fluoroaromatic imines and ketones to obtain the exclusive C-H or C-F bond activation product.

  17. An iridium-mediated C-H activation/CO2-carboxylation reaction of 1,1-bisdiphenylphosphinomethane.

    Science.gov (United States)

    Langer, Jens; Fabra, María José; García-Orduña, Pilar; Lahoz, Fernando J; Görls, Helmar; Oro, Luis A; Westerhausen, Matthias

    2010-09-07

    The reaction of 1,1-bisdiphenylphosphinomethane (dppm, 4 eq.) with [IrCl(coe)(2)](2) results in a solvent dependent equilibrium from which the complexes [IrCl(dppm)(dppm-H)(H)] (1) and [Ir(dppm)(2)]Cl (2) were isolated. When 2 is dissolved in methanol, [IrCl(dppm)(2)(H)][OCH(3)] (4) is formed as dominant species in solution. The C-H activation reaction which leads to 1 and 4 can be suppressed by adding an additional dppm ligand per iridium center resulting in the formation of [Ir(dppm)(3)]Cl (5). If the reaction of dppm with [IrX(coe)(2)](2) (X = Cl, I) is performed under an atmosphere of CO(2) the complexes [IrX(dppm)(H){(Ph(2)P)(2)C-COOH}] (6: X = Cl; 7: X = I) are formed by a CH activation/CO(2) carboxylation sequence. The reaction of 6 with NH(4)PF yields [IrCl(dppm)(2)(H)]PF(6).(10). Additionally the lithium compounds [Li(dme)(2)(dppm-H)] (3) and [Li(dme){(Ph(2)P)(2)CHCOO}](2) (8) were prepared for comparison. The molecular structures of the compounds 1, 3, 5, 7, 8 and of the related iridium complex [IrCl(dppm)(2)(H)]I (11) are reported.

  18. PREPARATION AND CATALYTIC ACTIVITY OF BIOACTIVE FIBERS

    Institute of Scientific and Technical Information of China (English)

    Yu-yuan Yao; Wen-xing Chen; Bao-yan Zhao; Shen-shui Lü

    2006-01-01

    Two kinds of water-soluble metallophthalocyanines, binuclear cobalt phthalocyanine (Co2Pc2) and binuclear ferric phthalocyanine (Fe2Pc2), were synthesized through phenylanhydride-urea route and characterized by elemental analysis and FT-IR spectra. Binuclear metallophthalocyanine derivatives (Mt2Pc2) were immobilized on silk fibers and modified viscose fibers to construct bioactive fibers of mimic enzyme. Mt2Pc2 was used as the active center ofbioactive fibers, viscose and silk fibers as the microenvironments. The catalytic oxidation ability of bioactive fibers on the malodors of methanthiol and hydrogen sulfide was investigated at room temperature. The experimental results indicated that the catalytic activity of such bioactive fibers was closely correlative to the types ofbioactive fibers and substrates.

  19. Method to produce catalytically active nanocomposite coatings

    Energy Technology Data Exchange (ETDEWEB)

    Erdemir, Ali; Eryilmaz, Osman Levent; Urgen, Mustafa; Kazmanli, Kursat

    2016-02-09

    A nanocomposite coating and method of making and using the coating. The nanocomposite coating is disposed on a base material, such as a metal or ceramic; and the nanocomposite consists essentially of a matrix of an alloy selected from the group of Cu, Ni, Pd, Pt and Re which are catalytically active for cracking of carbon bonds in oils and greases and a grain structure selected from the group of borides, carbides and nitrides.

  20. Copper-mediated C-H activation/C-S cross-coupling of heterocycles with thiols

    KAUST Repository

    Ranjit, Sadananda

    2011-11-04

    We report the synthesis of a series of aryl- or alkyl-substituted 2-mercaptobenzothiazoles by direct thiolation of benzothiazoles with aryl or alkyl thiols via copper-mediated aerobic C-H bond activation in the presence of stoichiometric CuI, 2,2′-bipyridine and Na 2CO 3. We also show that the approach can be extended to thiazole, benzimidazole, and indole substrates. In addition, we present detailed mechanistic investigations on the Cu(I)-mediated direct thiolation reactions. Both computational studies and experimental results reveal that the copper-thiolate complex [(L)Cu(SR)] (L: nitrogen-based bidentate ligand such as 2,2′-bipyridine; R: aryl or alkyl group) is the first reactive intermediate responsible for the observed organic transformation. Furthermore, our computational studies suggest a stepwise reaction mechanism based on a hydrogen atom abstraction pathway, which is more energetically feasible than many other possible pathways including β-hydride elimination, single electron transfer, hydrogen atom transfer, oxidative addition/reductive elimination, and σ-bond metathesis. © 2011 American Chemical Society.

  1. Two-State Reactivity in Low-Valent Iron-Mediated C-H Activation and the Implications for Other First-Row Transition Metals.

    Science.gov (United States)

    Sun, Yihua; Tang, Hao; Chen, Kejuan; Hu, Lianrui; Yao, Jiannian; Shaik, Sason; Chen, Hui

    2016-03-23

    C-H bond activation/functionalization promoted by low-valent iron complexes has recently emerged as a promising approach for the utilization of earth-abundant first-row transition metals to carry out this difficult transformation. Herein we use extensive density functional theory and high-level ab initio coupled cluster calculations to shed light on the mechanism of these intriguing reactions. Our key mechanistic discovery for C-H arylation reactions reveals a two-state reactivity (TSR) scenario in which the low-spin Fe(II) singlet state, which is initially an excited state, crosses over the high-spin ground state and promotes C-H bond cleavage. Subsequently, aryl transmetalation occurs, followed by oxidation of Fe(II) to Fe(III) in a single-electron transfer (SET) step in which dichloroalkane serves as an oxidant, thus promoting the final C-C coupling and finalizing the C-H functionalization. Regeneration of the Fe(II) catalyst for the next round of C-H activation involves SET oxidation of the Fe(I) species generated after the C-C bond coupling. The ligand sphere of iron is found to play a crucial role in the TSR mechanism by stabilization of the reactive low-spin state that mediates the C-H activation. This is the first time that the successful TSR concept conceived for high-valent iron chemistry is shown to successfully rationalize the reactivity for a reaction promoted by low-valent iron complexes. A comparative study involving other divalent middle and late first-row transition metals implicates iron as the optimum metal in this TSR mechanism for C-H activation. It is predicted that stabilization of low-spin Mn(II) using an appropriate ligand sphere should produce another promising candidate for efficient C-H bond activation. This new TSR scenario therefore emerges as a new strategy for using low-valent first-row transition metals for C-H activation reactions.

  2. Asymmetric Synthesis of (-)-Incarvillateine Employing an Intramolecular Alkylation via Rh-Catalyzed Olefinic C-H Bond Activation

    Energy Technology Data Exchange (ETDEWEB)

    Tsai, Andy; Bergman, Robert; Ellman, Jonathan

    2008-02-18

    An asymmetric total synthesis of (-)-incarvillateine, a natural product having potent analgesic properties, has been achieved in 11 steps and 15.4% overall yield. The key step is a rhodium-catalyzed intramolecular alkylation of an olefinic C-H bond to set two stereocenters. Additionally, this transformation produces an exocyclic, tetrasubstituted alkene through which the bicyclic piperidine moiety can readily be accessed.

  3. Asymmetric Synthesis of (-)-Incarvillateine Employing an Intramolecular Alkylation via Rh-Catalyzed Olefinic C-H Bond Activation

    Energy Technology Data Exchange (ETDEWEB)

    Tsai, Andy; Bergman, Robert; Ellman, Jonathan

    2008-02-18

    An asymmetric total synthesis of (-)-incarvillateine, a natural product having potent analgesic properties, has been achieved in 11 steps and 15.4% overall yield. The key step is a rhodium-catalyzed intramolecular alkylation of an olefinic C-H bond to set two stereocenters. Additionally, this transformation produces an exocyclic, tetrasubstituted alkene through which the bicyclic piperidine moiety can readily be accessed.

  4. Rhodium-Catalyzed β-Selective Oxidative Heck-Type Coupling of Vinyl Acetate via C-H Activation.

    Science.gov (United States)

    Zhang, Hui-Jun; Lin, Weidong; Su, Feng; Wen, Ting-Bin

    2016-12-16

    An efficient Rh(III)-catalyzed direct ortho-C-H olefination of acetanilides with vinyl acetate was developed. This protocol provides a straightforward pathway to a series of (E)-2-acetamidostyryl acetates, giving access to indole derivatives following a simple hydrolysis/cyclization process.

  5. Synthesis of Isocoumarins from Cyclic 2-Diazo-1,3-diketones and Benzoic Acids via Rh(III)-Catalyzed C-H Activation and Esterification.

    Science.gov (United States)

    Yang, Cheng; He, Xinwei; Zhang, Lanlan; Han, Guang; Zuo, Youpeng; Shang, Yongjia

    2017-02-17

    A mild and efficient Rh(III)-catalyzed C-H activation/esterification reaction for the synthesis of isocoumarins has been developed. This procedure uses readily available benzoic acids and cyclic diazo-1,3-diketones as starting materials and involves domino intermolecular C-H activation in combination with intramolecular esterification to give the corresponding isocoumarins in moderate to excellent yields. This process provides a facile approach for the construction of isocoumarins containing various functional groups that does not require any additives.

  6. Mechanistic insights on iodine(III) promoted metal-free dual C-H activation involved in the formation of a spirocyclic bis-oxindole.

    Science.gov (United States)

    Sreenithya, A; Sunoj, Raghavan B

    2014-12-05

    The mechanism of a metal-free, phenyliodine(III) bis(trifluoroacetate) promoted, dual aryl C-H activation of an anilide to a spirocyclic bis-oxindole is examined using density functional theory (M06-2X). The most preferred pathway proceeds through the involvement of a novel iodonium ion intermediate and a pivotal trifluoroacetate counterion. The two sequential aryl C-H activations, assisted by trifluoroacetate as well as the superior leaving group ability of PhI, facilitate the formation of spirocyclic bis-oxindole.

  7. Beyond ferryl-mediated hydroxylation: 40 years of the rebound mechanism and C-H activation.

    Science.gov (United States)

    Huang, Xiongyi; Groves, John T

    2017-04-01

    Since our initial report in 1976, the oxygen rebound mechanism has become the consensus mechanistic feature for an expanding variety of enzymatic C-H functionalization reactions and small molecule biomimetic catalysts. For both the biotransformations and models, an initial hydrogen atom abstraction from the substrate (R-H) by high-valent iron-oxo species (Fe(n)=O) generates a substrate radical and a reduced iron hydroxide, [Fe(n-1)-OH ·R]. This caged radical pair then evolves on a complicated energy landscape through a number of reaction pathways, such as oxygen rebound to form R-OH, rebound to a non-oxygen atom affording R-X, electron transfer of the incipient radical to yield a carbocation, R(+), desaturation to form olefins, and radical cage escape. These various flavors of the rebound process, often in competition with each other, give rise to the wide range of C-H functionalization reactions performed by iron-containing oxygenases. In this review, we first recount the history of radical rebound mechanisms, their general features, and key intermediates involved. We will discuss in detail the factors that affect the behavior of the initial caged radical pair and the lifetimes of the incipient substrate radicals. Several representative examples of enzymatic C-H transformations are selected to illustrate how the behaviors of the radical pair [Fe(n-1)-OH ·R] determine the eventual reaction outcome. Finally, we discuss the powerful potential of "radical rebound" processes as a general paradigm for developing novel C-H functionalization reactions with synthetic, biomimetic catalysts. We envision that new chemistry will continue to arise by bridging enzymatic "radical rebound" with synthetic organic chemistry.

  8. A general strategy for organocatalytic activation of C-H bonds via photoredox catalysis: direct arylation of benzylic ethers.

    Science.gov (United States)

    Qvortrup, Katrine; Rankic, Danica A; MacMillan, David W C

    2014-01-15

    Direct C-H functionalization and arylation of benzyl ethers has been accomplished via photoredox organocatalysis. The productive merger of a thiol catalyst and a commercially available iridium photoredox catalyst in the presence of household light directly affords benzylic arylation products in good to excellent yield. The utility of this methodology is further demonstrated in direct arylation of 2,5-dihydrofuran to form a single regioisomer.

  9. Tuning the Catalytic Activity of Subcellular Nanoreactors.

    Science.gov (United States)

    Jakobson, Christopher M; Chen, Yiqun; Slininger, Marilyn F; Valdivia, Elias; Kim, Edward Y; Tullman-Ercek, Danielle

    2016-07-31

    Bacterial microcompartments are naturally occurring subcellular organelles of bacteria and serve as a promising scaffold for the organization of heterologous biosynthetic pathways. A critical element in the design of custom biosynthetic organelles is quantitative control over the loading of heterologous enzymes to the interior of the organelles. We demonstrate that the loading of heterologous proteins to the 1,2-propanediol utilization microcompartment of Salmonella enterica can be controlled using two strategies: by modulating the transcriptional activation of the microcompartment container and by coordinating the expression of the microcompartment container and the heterologous cargo. These strategies allow general control over the loading of heterologous proteins localized by two different N-terminal targeting peptides and represent an important step toward tuning the catalytic activity of bacterial microcompartments for increased biosynthetic productivity. Copyright © 2016. Published by Elsevier Ltd.

  10. Mechanistic insight into conjugated N-N bond cleavage by Rh(III)-catalyzed redox-neutral C-H activation of pyrazolones.

    Science.gov (United States)

    Wu, Weirong; Liu, Yuxia; Bi, Siwei

    2015-08-14

    Density functional theory (DFT) calculations have been performed to investigate the detailed mechanism of Rh(III)-catalyzed redox-neutral C-H activation of pyrazolones with PhC≡CPh. It is found that (1) the methylene C-H activation is prior to the phenyl C-H activation, (2) the N-N bond cleavage is realized via Rh(III) → Rh(I) → Rh(III) rather than via Rh(III) → Rh(V) → Rh(III). The zwitterionic Rh(I) complex is identified to be a key intermediate in promoting the N-N bond cleavage. (3) Different from the Rh(III)-catalyzed hydrazine-directed C-H activation for indole synthesis, the rate-determining step of the reaction studied in this work is the Rh(III) → Rh(I) → Rh(III) process resulting in the N-N bond cleavage rather than the alkyne insertion step. The present theoretical study provides new insight into the mechanism of the conjugated N-N bond cleavage.

  11. Catalytic

    Directory of Open Access Journals (Sweden)

    S.A. Hanafi

    2014-03-01

    Full Text Available A series of dealuminated Y-zeolites impregnated by 0.5 wt% Pt catalysts promoted by different amounts of Ni, Pd or Cr (0.3 and 0.6 wt% were prepared and characterized as hydrocracking catalysts. The physicochemical and structural characterization of the solid catalysts were investigated and reported through N2 physisorption, XRD, TGA-DSC, FT-IR and TEM techniques. Solid catalysts surface acidities were investigated through FT-IR spectroscopy aided by pyridine adsorption. The solid catalytic activities were evaluated through hydroconversion of n-hexane and n-heptane employing micro-catalytic pulse technique directly connected to a gas chromatograph analyzer. The thermal stability of the solids was also investigated up to 800 °C. Crystallinity studies using the XRD technique of all modified samples proved analogous to the parent Y-zeolite, exhibiting nearly an amorphous and microcrystalline character of the second metal oxides. Disclosure of bimetallic catalysts crystalline characterization, through XRD, was not viable. The nitrogen adsorption–desorption isotherms for all samples concluded type I adsorption isotherms, without any hysteresis loop, indicating that the entire pore system is composed of micropores. TEM micrographs of the solid catalysts demonstrate well-dispersed Pt, Ni and Cr nanoparticles having sizes of 2–4 nm and 7–8 nm, respectively. The catalytic activity results indicate that the bimetallic (0.5Pt–0.3Cr/D18H–Y catalyst is the most active towards n-hexane and n-heptane isomerization while (0.5Pt–0.6Ni/D18H–Y catalyst can be designed as most suitable as a cracking catalyst.

  12. Mechanistic insights into C-H amination via dicopper nitrenes.

    Science.gov (United States)

    Aguila, Mae Joanne B; Badiei, Yosra M; Warren, Timothy H

    2013-06-26

    We examine important reactivity pathways relevant to stoichiometric and catalytic C-H amination via isolable β-diketiminato dicopper alkylnitrene intermediates {[Cl2NN]Cu}2(μ-NR). Kinetic studies involving the stoichiometric amination of ethylbenzene by {[Cl2NN]Cu}2(μ-N(t)Bu) (3) demonstrate that the terminal nitrene [Cl2NN]Cu═N(t)Bu is the active intermediate in C-H amination. Initial rates exhibit saturation behavior at high ethylbenzene loadings and an inverse dependence on the copper species [Cl2NN]Cu, both consistent with dissociation of a [Cl2NN]Cu fragment from 3 prior to C-H amination. C-H amination experiments employing 1,4-dimethylcyclohexane and benzylic radical clock substrate support a stepwise H-atom abstraction/radical rebound pathway. Dicopper nitrenes [Cu]2(μ-NCHRR') derived from 1° and 2° alkylazides are unstable toward tautomerization to copper(I) imine complexes [Cu](HN═CRR'), rendering 1° and 2° alkylnitrene complexes unsuitable for C-H amination.

  13. Tuning the reactivity of an actor ligand for tandem CO2 and C-H activations: from spectator metals to metal-free.

    Science.gov (United States)

    Annibale, Vincent T; Dalessandro, Daniel A; Song, Datong

    2013-10-30

    The 4,5-diazafluorenide ligand (L(-)) serves as an actor ligand in the formal insertion of CO2 into a C-H bond remote from the metal center. With the Ru(II) complex of L(-) as the starting point, Rh(III), Rh(I), and Cu(I) were used as spectator metal centers to tune the reactivity of the actor ligand toward CO2. In the case of Rh(III)-diazafluorenide a room temperature reversible activation of CO2 was observed, similar to the isoelectronic Ru(II) analogue. In the case of Rh(I)- and Cu(I)-diazafluorenide CO2 is trapped by the formation of dinuclear carboxylate complexes and diazafluorene (LH). The spectator metal center could even be replaced entirely with an organic group allowing for the first metal-free reversible tandem CO2 and C-H activation.

  14. Palladium(II)-Catalyzed C-H Bond Activation/C-C and C-O Bond Formation Reaction Cascade: Direct Synthesis of Coumestans.

    Science.gov (United States)

    Neog, Kashmiri; Borah, Ashwini; Gogoi, Pranjal

    2016-12-02

    A palladium catalyzed cascade reaction of 4-hydroxycoumarins and in situ generated arynes has been developed for the direct synthesis of coumestans. This cascade strategy proceeds via C-H bond activation/C-O and C-C bond formations in a single reaction vessel. This methodology affords moderate to good yields of coumestans and is tolerant of a variety of functional groups including halide. The methodology was applied to the synthesis of natural product flemichapparin C.

  15. Theoretical studies on concerted versus two steps hydrogen atom transfer reaction by non-heme Mn(IV/III)=O complexes: how important is the oxo ligand basicity in the C-H activation step?

    Science.gov (United States)

    Jaccob, Madhavan; Ansari, Azaj; Pandey, Bhawana; Rajaraman, Gopalan

    2013-12-21

    High-valent metal-oxo complexes have been extensively studied over the years due to their intriguing properties and their abundant catalytic potential. The majority of the catalytic reactions performed by these metal-oxo complexes involves a C-H activation step and extensive efforts over the years have been undertaken to understand the mechanistic aspects of this step. The C-H activation by metal-oxo complexes proceeds via a hydrogen atom transfer reaction and this could happen by multiple pathways, (i) via a proton-transfer followed by an electron transfer (PT-ET), (ii) via an electron-transfer followed by a proton transfer (ET-PT), (iii) via a concerted proton-coupled electron transfer (PCET) mechanism. Identifying the right mechanism is a surging topic in this area and here using [Mn(III)H3buea(O)](2-) (1) and [Mn(IV)H3buea(O)](-) (2) species (where H3buea = tris[(N'-tert-butylureaylato)-N-ethylene]aminato) and its C-H activation reaction with dihydroanthracene (DHA), we have explored the mechanism of hydrogen atom transfer reactions. The experimental kinetic data reported earlier (T. H. Parsell, M.-Y. Yang and A. S. Borovik, J. Am. Chem. Soc., 2009, 131, 2762) suggests that the mechanism between 1 and 2 is drastically different. By computing the transition states, reaction energies and by analyzing the wavefunction of the reactant and transitions states, we authenticate the proposal that the Mn(III)=O undergoes a step wise PT-ET mechanism where as the Mn(IV)=O species undergo a concerted PCET mechanism. Both the species pass through a [Mn(III)-OH] intermediate and the stability of this species hold the key to the difference in the reactivity. The electronic origin for the difference in reactivity is routed back to the strength and basicity of the Mn-oxo bond and the computed results are in excellent agreement with the experimental results.

  16. Catalytic activity of carbons for methane decomposition reaction

    Energy Technology Data Exchange (ETDEWEB)

    Muradov, Nazim; Smith, Franklyn; T-Raissi, Ali [Florida Solar Energy Center, University of Central Florida, 1679 Clearlake Road, Cocoa, FL 32922 (United States)

    2005-05-15

    Catalytic decomposition of methane is an environmentally attractive approach to CO{sub 2}-free production of hydrogen. The objective of this work is to evaluate catalytic activity of a wide range of carbon materials for methane decomposition reaction and determine major factors governing their activity. It was demonstrated that the catalytic activity of carbon materials for methane decomposition is mostly determined by their structural and surface properties. Kinetics of methane decomposition reaction over disordered (amorphous) carbons such as carbon black and activated carbon were determined. The mechanism of carbon-catalyzed methane decomposition reaction and the nature of active sites on the carbon surface are discussed in this paper.

  17. Activation of C-H Bonds in Pt(+) + x CH4 Reactions, where x = 1-4: Identification of the Platinum Dimethyl Cation.

    Science.gov (United States)

    Wheeler, Oscar W; Salem, Michelle; Gao, Amanda; Bakker, Joost M; Armentrout, P B

    2016-08-11

    Activation of C-H bonds in the sequential reactions of Pt(+) + x(CH4/CD4), where x = 1-4, have been investigated using infrared multiple photon dissociation (IRMPD) spectroscopy and theoretical calculations. Pt(+) cations are formed by laser ablation and exposed to controlled amounts of CH4/CD4 leading to [Pt,xC,(4x-2)H/D](+) dehydrogenation products. Irradiation of these products in the 400-2100 cm(-1) range leads to CH4/CD4 loss from the x = 3 and 4 products, whereas PtCH2(+)/PtCD2(+) products do not decompose at all, and x = 2 products dissociate only when formed from a higher order product. The structures of these complexes were explored theoretically at several levels of theory with three different basis sets. Comparison of the experimental and theoretical results indicate that the species formed have a Pt(CH3)2(+)(CH4)x-2/Pt(CD3)2(+)(CD4)x-2 binding motif for x = 2-4. Thus, reaction of Pt(+) with methane occurs by C-H bond activation to form PtCH2(+), which reacts with an additional methane molecule by C-H bond activation to form the platinum dimethyl cation. This proposed reaction mechanism is consistent with theoretical explorations of the potential energy surface for reactions of Pt(+) with one and two methane molecules.

  18. Promotional effects of chemisorbed oxygen and hydroxide in the activation of C-H and O-H bonds over transition metal surfaces

    Science.gov (United States)

    Hibbitts, David; Neurock, Matthew

    2016-08-01

    Electronegative coadsorbates such as atomic oxygen (O*) and hydroxide (OH*) can act as Brønsted bases when bound to Group 11 as well as particular Group 8-10 metal surfaces and aid in the activation of X-H bonds. First-principle density functional theory calculations were carried out to systematically explore the reactivity of the C-H bonds of methane and surface methyl intermediates as well as the O-H bond of methanol directly and with the assistance of coadsorbed O* and OH* intermediates over Group 11 (Cu, Ag, and Au) and Group 8-10 transition metal (Ru, Rh, Pd, Os, Ir, and Pt) surfaces. C-H as well as O-H bond activation over the metal proceeds via a classic oxidative addition type mechanism involving the insertion of the metal center into the C-H or O-H bond. O* and OH* assist C-H and O-H activation over particular Group 11 and Group 8-10 metal surfaces via a σ-bond metathesis type mechanism involving the oxidative addition of the C-H or O-H bond to the metal along with a reductive deprotonation of the acidic C-H and O-H bond over the M-O* or M-OH* site pair. The O*- and OH*-assisted C-H activation paths are energetically preferred over the direct metal catalyzed C-H scission for all Group 11 metals (Cu, Ag, and Au) with barriers that are 0.4-1.5 eV lower than those for the unassisted routes. The barriers for O*- and OH*-assisted C-H activation of CH4 on the Group 8-10 transition metals, however, are higher than those over the bare transition metal surfaces by as much as 1.4 eV. The C-H activation of adsorbed methyl species show very similar trends to those for CH4 despite the differences in structure between the weakly bound methane and the covalently adsorbed methyl intermediates. The activation of the O-H bond of methanol is significantly promoted by O* as well as OH* intermediates over both the Group 11 metals (Cu, Ag, and Au) as well as on all Group 8-10 metals studied (Ru, Rh, Pd, Os, Ir, and Pt). The O*- and OH*-assisted CH3O-H barriers are 0.6 to 2

  19. Simultaneous structure-activity studies and arming of natural products by C-H amination reveal cellular targets of eupalmerin acetate

    Science.gov (United States)

    Li, Jing; Cisar, Justin S.; Zhou, Cong-Ying; Vera, Brunilda; Williams, Howard; Rodríguez, Abimael D.; Cravatt, Benjamin F.; Romo, Daniel

    2013-06-01

    Natural products have a venerable history of, and enduring potential for the discovery of useful biological activity. To fully exploit this, the development of chemical methodology that can functionalize unique sites within these complex structures is highly desirable. Here, we describe the use of rhodium(II)-catalysed C-H amination reactions developed by Du Bois to carry out simultaneous structure-activity relationship studies and arming (alkynylation) of natural products at ‘unfunctionalized’ positions. Allylic and benzylic C-H bonds in the natural products undergo amination while olefins undergo aziridination, and tertiary amine-containing natural products are converted to amidines by a C-H amination-oxidation sequence or to hydrazine sulfamate zwitterions by an unusual N-amination. The alkynylated derivatives are ready for conversion into cellular probes that can be used for mechanism-of-action studies. Chemo- and site-selectivity was studied with a diverse library of natural products. For one of these—the marine-derived anticancer diterpene, eupalmerin acetate—quantitative proteome profiling led to the identification of several protein targets in HL-60 cells, suggesting a polypharmacological mode of action.

  20. Synthesis and Catalytic Activity of Two New Cyclic Tetraaza Ligands

    Directory of Open Access Journals (Sweden)

    Burkhard König

    2003-05-01

    Full Text Available Two new chiral cyclic tetraaza ligands were synthesized and characterized. Their catalytic activity was tested in the asymmetric addition of diethylzinc to benzaldehyde. The expected secondary alcohol was obtained in moderate yields, but with very low enantioselectivity.

  1. Resolving the Structure of Active Sites on Platinum Catalytic Nanoparticles

    DEFF Research Database (Denmark)

    Chang, Lan Yun; Barnard, Amanda S.; Gontard, Lionel Cervera

    2010-01-01

    Accurate understanding of the structure of active sites is fundamentally important in predicting catalytic properties of heterogeneous nanocatalysts. We present an accurate determination of both experimental and theoretical atomic structures of surface monatomic steps on industrial platinum nanop...

  2. Palladium Catalyzed Allylic C-H Alkylation

    DEFF Research Database (Denmark)

    Engelin, Casper Junker; Fristrup, Peter

    2011-01-01

    -H alkylation reaction which is the topic of the current review. Particular emphasis is put on current mechanistic proposals for the three reaction types comprising the overall transformation: C-H activation, nucleophillic addition, and re-oxidation of the active catalyst. Recent advances in C-H bond activation...... an acetate ion coordinated to Pd. Several of the reported systems rely on benzoquinone for re-oxidation of the active catalyst. The scope for nucleophilic addition in allylic C-H alkylation is currently limited, due to demands on pKa of the nucleophile. This limitation could be due to the pH dependence...

  3. Rh(III)-Catalyzed Carbocyclization of 3-(Indolin-1-yl)-3-oxopropanenitriles with Alkynes and Alkenes through C-H Activation.

    Science.gov (United States)

    Zhou, Tao; Wang, Yanwei; Li, Bin; Wang, Baiquan

    2016-10-07

    Rh(III)-catalyzed carbocyclization reactions of 3-(indolin-1-yl)-3-oxopropanenitriles with alkynes and alkenes have been developed to form 1,7-fused indolines through C-H activation. These reactions have a broad range of substrates and high yields. Unsymmetrical aryl-alkyl substituted alkynes proceeded smoothly with high regioselectivity. Electron-rich alkynes could undergo further oxidative coupling reaction to form polycyclic compounds. For alkenes, 1,2-dihydro-4H-pyrrolo[3,2,1-ij]quinolin-4-ones were formed via C(sp(2))-H bond alkenylation and C(sp(2))-H, C(sp(3))-H oxidative coupling reactions.

  4. Catalytic activities of zeolite compounds for decomposing aqueous ozone.

    Science.gov (United States)

    Kusuda, Ai; Kitayama, Mikito; Ohta, Yoshio

    2013-12-01

    The advanced oxidation process (AOP), chemical oxidation using aqueous ozone in the presence of appropriate catalysts to generate highly reactive oxygen species, offers an attractive option for removing poorly biodegradable pollutants. Using the commercial zeolite powders with various Si/Al ratios and crystal structures, their catalytic activities for decomposing aqueous ozone were evaluated by continuously flowing ozone to water containing the zeolite powders. The hydrophilic zeolites (low Si/Al ratio) with alkali cations in the crystal structures were found to possess high catalytic activity for decomposing aqueous ozone. The hydrophobic zeolite compounds (high Si/Al ratio) were found to absorb ozone very well, but to have no catalytic activity for decomposing aqueous ozone. Their catalytic activities were also evaluated by using the fixed bed column method. When alkali cations were removed by acid rinsing or substituted by alkali-earth cations, the catalytic activities was significantly deteriorated. These results suggest that the metal cations on the crystal surface of the hydrophilic zeolite would play a key role for catalytic activity for decomposing aqueous ozone.

  5. Development of Batch and Flow Immobilized Catalytic Systems with High Catalytic Activity and Reusability.

    Science.gov (United States)

    Yamada, Yoichi M A

    2017-01-01

    My mission in catalysis research is to develop highly active and reusable supported catalytic systems in terms of fundamental chemistry and industrial application. For this purpose, I developed three types of highly active and reusable supported catalytic systems. The first type involves polymeric base-supported metal catalysts: Novel polymeric imidazole-Pd and Cu complexes were developed that worked at the mol ppm level for a variety of organic transformations. The second involves catalytic membrane-installed microflow reactors: Membranous polymeric palladium and copper complex/nanoparticle catalysts were installed at the center of a microtube to produce novel catalytic membrane-immobilized flow microreactor devices. These catalytic devices mediated a variety of organic transformations to afford the corresponding products in high yield within 1-38 s. The third is a silicon nanowire array-immobilized palladium nanoparticle catalyst. This device promoted a variety of organic transformations as a heterogeneous catalyst. The Mizoroki-Heck reaction proceeded with 280 mol ppb (0.000028 mol%) of the catalyst, affording the corresponding products in high yield.

  6. Improved catalytic activity of laser generated bimetallic and trimetallic nanoparticles.

    Science.gov (United States)

    Singh, Rina; Soni, R K

    2014-09-01

    We report synthesis of silver nanoparticles, bimetallic (Al2O3@Ag) nanoparticles and trimetallic (Al2O3@AgAu) nanoparticles by nanosecond pulse laser ablation (PLA) in deionized water. Two-step laser ablation methodologies were adopted for the synthesis of bi- and tri-metallic nanoparticles. In this method a silver or gold target was ablated in colloidal solution of γ-alumina nanoparticles prepared by PLA. The TEM image analysis of bimetallic and trimetallic particles reveals deposition of fine silver particles and Ag-Au alloy particles, respectively, on large alumina particles. The laser generated nanoparticles were tested for catalytic reduction of 4-nitrophenol to 4-aminophenol and showed excellent catalytic behaviour. The catalytic rate was greatly improved by incorporation of additional metal in silver nanoparticles. The catalytic efficiency of trimetallic Al2O3@AgAu for reduction of 4-nitrophenol to 4-aminophenol was remarkably enhanced and the catalytic reaction was completed in just 5 sec. Even at very low concentration, both Al2O3@Ag nanoparticles and Al2O3@AgAu nanoparticles showed improved rate of catalytic reduction than monometallic silver nanoparticles. Our results demonstrate that alumina particles in the solution not only provide the active sites for particle dispersion but also improve the catalytic activity.

  7. 2008 C. H. McCloy Lecture: Social Psychology and Physical Activity--Back to the Future

    Science.gov (United States)

    Gill, Diane L.

    2009-01-01

    In the early 1970s, both my academic career and the psychology subdiscipline within kinesiology began as "social psychology and physical activity." Since then, sport and exercise psychology research has shifted away from the social to a narrower bio-psycho-(no social) approach, and professional practice has focused on the elite rather…

  8. 2008 C. H. McCloy Lecture: Social Psychology and Physical Activity--Back to the Future

    Science.gov (United States)

    Gill, Diane L.

    2009-01-01

    In the early 1970s, both my academic career and the psychology subdiscipline within kinesiology began as "social psychology and physical activity." Since then, sport and exercise psychology research has shifted away from the social to a narrower bio-psycho-(no social) approach, and professional practice has focused on the elite rather than the…

  9. Access to Silylated Pyrazole Derivatives by Palladium-Catalyzed C-H Activation of a TMS group.

    Science.gov (United States)

    Mistico, Laetitia; Querolle, Olivier; Meerpoel, Lieven; Angibaud, Patrick; Durandetti, Muriel; Maddaluno, Jacques

    2016-07-04

    A simple and efficient approach to new silylated heterocycles of potential interest in medicinal chemistry is presented. A set of bromophenyl trimethylsilyl pyrazole intermediates can be transformed by direct organometallic routes into two families of regioisomeric iodoaryl substrates; using either arylzinc or aryllithium chemistry, the TMS group remains on the pyrazole ring or translocates to the aryl moiety. These two families can then be efficiently transformed into benzo silino pyrazoles thanks to a single-step cyclization relying on the Pd-catalyzed activation of a non-activated C(sp(3) )-H bond alpha to a silicon atom. The experimental conditions used, which are fully compatible with the pyrazole ring, suggest that this reaction evolves through a concerted metalation-deprotonation (CMD) mechanism.

  10. Self-optimisation and model-based design of experiments for developing a C-H activation flow process.

    Science.gov (United States)

    Echtermeyer, Alexander; Amar, Yehia; Zakrzewski, Jacek; Lapkin, Alexei

    2017-01-01

    A recently described C(sp(3))-H activation reaction to synthesise aziridines was used as a model reaction to demonstrate the methodology of developing a process model using model-based design of experiments (MBDoE) and self-optimisation approaches in flow. The two approaches are compared in terms of experimental efficiency. The self-optimisation approach required the least number of experiments to reach the specified objectives of cost and product yield, whereas the MBDoE approach enabled a rapid generation of a process model.

  11. Amine Catalyzed Solvent C-H Bond Activation as Deactivation Route for Cationic Decamethylzirconocene Olefin Polymerization Catalysts

    NARCIS (Netherlands)

    Rios, Itzel Guerrero; Novarino, Elena; van der Veer, Siebe; Hessen, Bart; Bouwkamp, Marco W.

    2009-01-01

    [Cp(2)ZrMe)(+) + Me(3)N + C(6)H(6) down arrow TS2 Cp(2)ZrMePh + (Me(3)NH](+) down arrow TS3 [Cp(2)ZrPh](+) + Me(3)N + CH(4) The C-D activation of bromobenzene-d(5), by [CP(2)*ZrMe(BrC(6)D(5)-kappa Br)][B(C(6)F(5))(4)] to form sigma-aryl complex [Cp(2)*Zr(2-BrC(6)D(4)-kappa(2)Br,C)][B(C(6)F(5))(4)

  12. Amine Catalyzed Solvent C-H Bond Activation as Deactivation Route for Cationic Decamethylzirconocene Olefin Polymerization Catalysts

    NARCIS (Netherlands)

    Rios, Itzel Guerrero; Novarino, Elena; van der Veer, Siebe; Hessen, Bart; Bouwkamp, Marco W.

    2009-01-01

    [Cp(2)ZrMe)(+) + Me(3)N + C(6)H(6) down arrow TS2 Cp(2)ZrMePh + (Me(3)NH](+) down arrow TS3 [Cp(2)ZrPh](+) + Me(3)N + CH(4) The C-D activation of bromobenzene-d(5), by [CP(2)*ZrMe(BrC(6)D(5)-kappa Br)][B(C(6)F(5))(4)] to form sigma-aryl complex [Cp(2)*Zr(2-BrC(6)D(4)-kappa(2)Br,C)][B(C(6)F(5))(4)] i

  13. Rh(I)-Catalyzed Arylation of Heterocycles via C-H Bond Activation: Expanded Scope Through Mechanistic Insight

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, Jared; Berman, Ashley; Bergman, Robert; Ellman, Jonathan

    2007-07-18

    A practical, functional group tolerant method for the Rh-catalyzed direct arylation of a variety of pharmaceutically important azoles with aryl bromides is described. Many of the successful azole and aryl bromide coupling partners are not compatible with methods for the direct arylation of heterocycles using Pd(0) or Cu(I) catalysts. The readily prepared, low molecular weight ligand, Z-1-tert-butyl-2,3,6,7-tetrahydrophosphepine, which coordinates to Rh in a bidentate P-olefin fashion to provide a highly active yet thermally stable arylation catalyst, is essential to the success of this method. By using the tetrafluoroborate salt of the corresponding phosphonium, the reactions can be assembled outside of a glove box without purification of reagents or solvent. The reactions are also conducted in THF or dioxane, which greatly simplifies product isolation relative to most other methods for direct arylation of azoles employing high-boiling amide solvents. The reactions are performed with heating in a microwave reactor to obtain excellent product yields in two hours.

  14. Catalytically highly active top gold atom on palladium nanocluster.

    Science.gov (United States)

    Zhang, Haijun; Watanabe, Tatsuya; Okumura, Mitsutaka; Haruta, Masatake; Toshima, Naoki

    2011-10-23

    Catalysis using gold is emerging as an important field of research in connection with 'green' chemistry. Several hypotheses have been presented to explain the markedly high activities of Au catalysts. So far, the origin of the catalytic activities of supported Au catalysts can be assigned to the perimeter interfaces between Au nanoclusters and the support. However, the genesis of the catalytic activities of colloidal Au-based bimetallic nanoclusters is unclear. Moreover, it is still a challenge to synthesize Au-based colloidal catalysts with high activity. Here we now present the 'crown-jewel' concept (Supplementary Fig. S1) for preparation of catalytically highly Au-based colloidal catalysts. Au-Pd colloidal catalysts containing an abundance of top (vertex or corner) Au atoms were synthesized according to the strategy on a large scale. Our results indicate that the genesis of the high activity of the catalysts could be ascribed to the presence of negatively charged top Au atoms.

  15. Characterization of two alkyl hydroperoxide reductase C homologs alkyl hydroperoxide reductase C_H1 and alkyl hydroperoxide reductase C_H2 in Bacillus subtilis

    Institute of Scientific and Technical Information of China (English)

    Mee-Kyung; Cha; Yoo-Jeen; Bae; Kyu-Jeong; Kim; Byung-Joon; Park; Il-Han; Kim

    2015-01-01

    AIM: To identify alkyl hydroperoxide reductase subunit C(AhpC) homologs in Bacillus subtilis(B. subtilis) and to characterize their structural and biochemical properties. AhpC is responsible for the detoxification of reactive oxygen species in bacteria.METHODS: Two AhpC homologs(AhpC_H1 and AhpC_H2) were identified by searching the B. subtilis database; these were then cloned and expressed in Escherichia coli. AhpC mutants carrying substitutions of catalytically important Cys residues(C37S, C47 S, C166 S, C37/47 S, C37/166 S, C47/166 S, and C37/47/166 S for AhpC_H1; C52 S, C169 S, and C52/169 S for AhpC_H2) were obtained by site-directed mutagenesis and purified, and their structure-function relationship was analyzed. The B. subtilis ahp C genes were disrupted by the short flanking homology method, and the phenotypes of the resulting AhpC-deficient bacteria were examined.RESULTS: Comparative characterization of AhpC homologs indicates that AhpC_H1 contains an extra C37, which forms a disulfide bond with the peroxidatic C47, and behaves like an atypical 2-Cys AhpC, while AhpC_H2 functions like a typical 2-Cys AhpC. Tryptic digestion analysis demonstrated the presence of intramolecular Cys37-Cys47 linkage, which could be reduced by thioredoxin, resulting in the association of the dimer into higher-molecular-mass complexes. Peroxidase activity analysis of Cys→Ser mutants indicated that three Cys residues were involved in the catalysis. AhpC_H1 was resistant to inactivation by peroxide substrates, but had lower activity at physiological H2O2 concentrations compared to AhpC_H2, suggesting that in B. subtilis, the enzymes may be physiologically functional at different substrate concentrations. The exposure to organic peroxides induced AhpC_H1 expression, while AhpC_H1-deficient mutants exhibited growth retardation in the stationary phase, suggesting the role of AhpC_H1 as an antioxidant scavenger of lipid hydroperoxides and a stress-response factor in B. subtilis

  16. Theoretical Study on the C-H Activation in Decarbonylation of Acetaldehyde by NiL2 (L=SO3CH3) Using Density Functional Theory

    Institute of Scientific and Technical Information of China (English)

    LIU Hongfei; JIA Tiekun; MIN Xinmin

    2014-01-01

    Density functional theory calculations were carried out to explore the potential energy surface (PES) associated with the gas-phase reaction of NiL2(L=SO3CH3) with acetone. The geometries and energies of the reactants, intermediates, products and transition states of the triplet ground potential energy surfaces of [Ni, O, C2, H4] were obtained at the B3LYP/6-311++G(d,p) levels in C,H,O atoms and B3LYP/Lanl2dz in Ni atom. It was found through our calculations that the decabonylation of acetaldehyde contains four steps including encounter complexation, C-C activation, aldehyde H-shift and nonreactive dissociation. The results revealed that C-C activation induced by NiL2(L=SO3CH3) led to the decarbonylation of acetaldehyde.

  17. DFT Mechanistic Study of the Selective Terminal C-H Activation of n-Pentane with a Tungsten Allyl Nitrosyl Complex

    KAUST Repository

    Lee, Richmond

    2017-01-17

    Mechanistic insights into the selective C-H terminal activation of n-pentane with tungsten allyl nitrosyl complex reported by Legzdins were gained by employing density functional theory with B3LYP hybrid functional. Using Bader’s atom in molecules (AIM) analysis on the elementary steps of the hydrogen transfer process, TS1 and TS2, it was observed that the calculated H-transfer models were closely similar to Hall’s metal-assisted σ-bond metathesis through bond critical point (BCP) comparisons. One distinguishable feature was the fact that the formal oxidation state of the W changed in the concerted H-transfer process. To better differentiate, we term these processes as ‘Formal Reductive Hydrogen Transfer’ (FRHT) for TS1 and ‘Formal Oxidative Hydrogen Transfer’ (FOHT) for TS2.

  18. Trends in the Catalytic CO Oxidation Activity of Nanoparticles

    DEFF Research Database (Denmark)

    Nørskov, Jens Kehlet; Falsig, Hanne; Larsen, Britt Hvolbæk

    2008-01-01

    Going for gold: Density functional calculations show how gold nanoparticles are more active catalysts for CO oxidation than other metal nanoparticles. The high catalytic activity of nanosized gold clusters at low temperature is found to be related to the ability of low-coordinate metal atoms to a...

  19. Catalytically active nanomaterials: a promising candidate for artificial enzymes.

    Science.gov (United States)

    Lin, Youhui; Ren, Jinsong; Qu, Xiaogang

    2014-04-15

    Natural enzymes, exquisite biocatalysts mediating every biological process in living organisms, are able to accelerate the rate of chemical reactions up to 10(19) times for specific substrates and reactions. However, the practical application of enzymes is often hampered by their intrinsic drawbacks, such as low operational stability, sensitivity of catalytic activity to environmental conditions, and high costs in preparation and purification. Therefore, the discovery and development of artificial enzymes is highly desired. Recently, the merging of nanotechnology with biology has ignited extensive research efforts for designing functional nanomaterials that exhibit various properties intrinsic to enzymes. As a promising candidate for artificial enzymes, catalytically active nanomaterials (nanozymes) show several advantages over natural enzymes, such as controlled synthesis in low cost, tunability in catalytic activities, as well as high stability against stringent conditions. In this Account, we focus on our recent progress in exploring and constructing such nanoparticulate artificial enzymes, including graphene oxide, graphene-hemin nanocomposites, carbon nanotubes, carbon nanodots, mesoporous silica-encapsulated gold nanoparticles, gold nanoclusters, and nanoceria. According to their structural characteristics, these enzyme mimics are categorized into three classes: carbon-, metal-, and metal-oxide-based nanomaterials. We aim to highlight the important role of catalytic nanomaterials in the fields of biomimetics. First, we provide a practical introduction to the identification of these nanozymes, the source of the enzyme-like activities, and the enhancement of activities via rational design and engineering. Then we briefly describe new or enhanced applications of certain nanozymes in biomedical diagnosis, environmental monitoring, and therapeutics. For instance, we have successfully used these biomimetic catalysts as colorimetric probes for the detection of

  20. Ligand versus Complex: C-F and C-H Bond Activation of Polyfluoroaromatics at a Cyclic (Alkyl)(Amino)Carbene.

    Science.gov (United States)

    Paul, Ursula S D; Radius, Udo

    2017-03-17

    C-F and C-H bond activation reactions of polyfluoroaromatics at the cyclic (alkyl)(amino)carbene (cAAC) cAAC(methyl) (1) are reported. Studies on the C-F bond activation using the cAAC-stabilized nickel(0) complex [Ni(cAAC(methyl) )2 ] (2) have shown that 2 does not react with fluorinated arenes. However, these investigations led to the observation of C-F bond cleavage of perfluorinated arenes by the carbene ligand cAAC(methyl) (1) itself. The reaction of 1 with C6 F6 , C6 F5 -C6 F5 , C6 F5 -CF3 , and C5 F5 N afforded the insertion products of cAAC into one of the C-F bonds of the substrate, that is, the C-F bond activation products (cAAC(methyl) )F(Ar(f) ) (Ar(f) =C6 F5 4 a, C6 F4 -C6 F5 4 b, C6 F4 -CF3 4 c, C5 F4 N 4 d). These products decompose readily upon heating to 80 °C within a few hours in solution with formation of ionic iminium salts [(cAAC(methyl) )(Ar(f) )][X] 6 a-d or neutral alkenyl perfluoroaryl imine compounds 7 a-d. The compounds (cAAC(methyl) )F(Ar(f) ) 4 a-d readily transfer fluoride, which has been exemplified by the fluoride transfer of all compounds using BF3 etherate as fluoride acceptor. Fluoride transfer has also been achieved starting from (cAAC(methyl) )F(C6 F4 -CF3 ) (4 c) or (cAAC(methyl) )F(C5 F4 N) (4 d) to other selected substrates such as trimethylchlorosilane, benzoyl chloride and tosyl chloride. Instead of C-F bond activation, insertion of the cAAC into the C-H bond was observed if 1 was treated with the partially fluorinated arenes C6 F5 H, 1,2,4,5-C6 F4 H2 , 1,3,5-C6 F3 H3 , and 1,3-C6 F2 H4 . The compounds (cAAC(methyl) )H(Ar(f) ) (Ar(f) =C6 F5 12 e, 2,3,5,6-C6 F4 H 12 f, 2,4,6-C6 F3 H2 12 g and 2,6-C6 F2 H3 12 h) have been isolated in good yields and have been characterized including X-ray analysis. Fluorobenzene C6 FH5 (pKa ≈37), the least C-H acidic fluoroarene used in this study, does not react. In order to investigate the scope and limitations of this type of cAAC C-H bond activation

  1. Design parameters for measurements of local catalytic activity on surfaces

    DEFF Research Database (Denmark)

    Johansson, Martin; Johannessen, Tue; Jørgensen, Jan Hoffmann;

    2006-01-01

    Computational fluid dynamics in combination with experiments is used to characterize a gas sampling device for measurements of the local catalytic activity on surfaces. The device basically consists of a quartz capillary mounted concentrically inside an aluminum tube. Reactant gas is blown toward...

  2. Catalytic Activity Control via Crossover between Two Different Microstructures

    KAUST Repository

    Zhou, Yuheng

    2017-09-08

    Metal nanocatalysts hold great promise for a wide range of heterogeneous catalytic reactions, while the optimization strategy of catalytic activity is largely restricted by particle size or shape control. Here, we demonstrate that a reversible microstructural control through the crossover between multiply-twinned nanoparticle (MTP) and single crystal (SC) can be readily achieved by solvent post-treatment on gold nanoparticles (AuNPs). Polar solvents (e.g. water, methanol) direct the transformation from MTP to SC accompanied by the disappearance of twinning and stacking faults. A reverse transformation from SC to MTP is achieved in non-polar solvent (e.g. toluene) mixed with thiol ligands. The transformation between two different microstructures is directly observed by in-situ TEM and leads to a drastic modulation of catalytic activity towards the gas-phase selective oxidation of alcohols. There is a quasi-linear relationship between TOFs and MTP concentrations. Based on the combined experimental and theoretical investigations of alcohol chemisorption on these nanocatalysts, we propose that the exposure of {211}-like microfacets associated with twin boundaries and stack faults accounts for the strong chemisorption of alcohol molecules on MTP AuNPs and thus the exceptionally high catalytic activity.

  3. Catalytic activity trends of CO oxidation – A DFT study

    DEFF Research Database (Denmark)

    Jiang, Tao

    eigenmodes and eigenvalues, and improving algorithms for geometry optimization in electronic structure calculations. The catalytic activity of gold nanoparticles has received wide attention since the discovery of their activity on CO oxidation by Professor Haruta in 1987. By using density functional theory...... (DFT) and microkinetic modeling, we study CO oxidation reaction pathway on a number of transition and noble metals, i.e. Au, Ag, Pt, Pd, Cu, Ni, Rh, Ru, with different surface morphologies, close packed surfaces, stepped surfaces, kinked surfaces, as well as 12␣atom corner model of a larger...... nanoparticle. The upper bound of the catalytic activity (Sabatier activity) is then obtained and shows that at room temperature gold nanoparticle is the best catalyst for CO oxidation among all the metals considered. Under high temperature reaction condition, however, close packed Pt surface become most...

  4. Catalytic Ethanol Dehydration over Different Acid-activated Montmorillonite Clays.

    Science.gov (United States)

    Krutpijit, Chadaporn; Jongsomjit, Bunjerd

    2016-01-01

    In the present study, the catalytic dehydration of ethanol to obtain ethylene over montmorillonite clays (MMT) with mineral acid activation including H2SO4 (SA-MMT), HCl (HA-MMT) and HNO3 (NA-MMT) was investigated at temperature range of 200 to 400°C. It revealed that HA-MMT exhibited the highest catalytic activity. Ethanol conversion and ethylene selectivity were found to increase with increased reaction temperature. At 400°C, the HA-MMT yielded 82% of ethanol conversion having 78% of ethylene yield. At lower temperature (i.e. 200 to 300°C), diethyl ether (DEE) was a major product. The highest activity obtained from HA-MMT can be attributed to an increase of weak acid sites and acid density by the activation of MMT with HCl. It can be also proven by various characterization techniques that in most case, the main structure of MMT did not alter by acid activation (excepted for NA-MMT). Upon the stability test for 72 h during the reaction, the MMT and HA-MMT showed only slight deactivation due to carbon deposition. Hence, the acid activation of MMT by HCl is promising to enhance the catalytic dehydration of ethanol.

  5. Activity of catalytic silver nanoparticles modulated by capping agent hydrophobicity.

    Science.gov (United States)

    Janani, Seralathan; Stevenson, Priscilla; Veerappan, Anbazhagan

    2014-05-01

    In this paper, a facile in situ method is reported for the preparation of catalytic silver nanoparticles (AgNPs) using N-acyl tyramine (NATA) with variable hydrophobic acyl length. Scanning electron microscopic analysis shows that NATA exists initially as larger aggregates in alkaline aqueous solution. The addition of AgNO3 dissociates these larger aggregate and subsequently promotes the formation of self-assembled NATA and AgNPs. Characterization of AgNPs using UV-vis spectroscopy, scanning electron microscope and transmission electron microscope revealed that the hydrophobic acyl chain length of NATA does not influence the particle size, shape and morphology. All NATA-AgNPs yielded relatively identical values in full width at half-maximum (FWHM) analysis, indicating that the AgNPs prepared with NATA are relatively polydispersed at all tested acyl chain lengths. These nanoparticles are able to efficiently catalyze the reduction of 4-nitro phenol to 4-amino phenol, 2-nitro aniline to 1,2-diamino benzene, 2,4,6-trinitro phenol to 2,4,6-triamino phenol by NaBH4 in an aqueous environment. The reduction reaction rate is determined to be pseudo-first order and the apparent rate constant is linearly dependent on the hydrophobic acyl chain length of the NATA. All reaction kinetics presented an induction period, which is dependent on the N-acyl chain length, indicating that the hydrophobic effects play a critical role in bringing the substrate to the metal nanoparticle surface to induce the catalytic reaction. In this study, however, the five catalytic systems have similar size and polydispersity, differing only in terms of capping agent hydrophobicity, and shows different catalytic activity with respect to the alkyl chain length of the capping agent. As discussed, the ability to modulate the metal nanoparticles catalytic property, by modifying the capping agent hydrophobicity represents a promising future for developing an efficient nanocatalyst without altering the size

  6. Aerobic Linear Allylic C-H Amination: Overcoming Benzoquinone Inhibition.

    Science.gov (United States)

    Pattillo, Christopher C; Strambeanu, Iulia I; Calleja, Pilar; Vermeulen, Nicolaas A; Mizuno, Tomokazu; White, M Christina

    2016-02-03

    An efficient aerobic linear allylic C-H amination reaction is reported under palladium(II)/bis-sulfoxide/Brønsted base catalysis. The reaction operates under preparative, operationally simple conditions (1 equiv of olefin, 1 atm O2 or air) with reduced Pd(II)/bis-sulfoxide catalyst loadings while providing higher turnovers and product yields than systems employing stoichiometric benzoquinone (BQ) as the terminal oxidant. Pd(II)/BQ π-acidic interactions have been invoked in various catalytic processes and are often considered beneficial in promoting reductive functionalizations. When such electrophilic activation for functionalization is not needed, however, BQ at high concentrations may compete with crucial ligand (bis-sulfoxide) binding and inhibit catalysis. Kinetic studies reveal an inverse relationship between the reaction rate and the concentration of BQ, suggesting that BQ is acting as a ligand for Pd(II) which results in an inhibitory effect on catalysis.

  7. Rh(III)-Catalyzed Diastereoselective Annulation of Amides with Quinone Monoacetals: Access to Bridged Nine-Membered Heterocycles via C-H Activation.

    Science.gov (United States)

    Yang, Wei; Dong, Jinhuan; Wang, Jingyi; Xu, Xianxiu

    2017-02-03

    An unprecedented Rh(III)-catalyzed annulation of various benzamides and acrylamides with quinone monoacetals was developed for the facile and efficient one-pot synthesis of bridged nine-membered benzo[c]azonine-1,5(2H)-diones and 2-azabicyclo[4.3.1]dec-4-ene-3,8-diones. It is the first example of synthesis of nine-membered heterocycles through Rh(III)-catalyzed C-H bond functionalization, and both aryl and vinyl C-H bonds are tolerant in this reaction. A plausible mechanism is proposed on the basis of control experiments.

  8. Zwitterionic and cationic bis(phosphine) platinum(II) complexes: structural, electronic, and mechanistic comparisons relevant to ligand exchange and benzene C-H activation processes.

    Science.gov (United States)

    Thomas, J Christopher; Peters, Jonas C

    2003-07-23

    Structurally similar but charge-differentiated platinum complexes have been prepared using the bidentate phosphine ligands [Ph(2)B(CH(2)PPh(2))(2)], ([Ph(2)BP(2)], [1]), Ph(2)Si(CH(2)PPh(2))(2), (Ph(2)SiP(2), 2), and H(2)C(CH(2)PPh(2))(2), (dppp, 3). The relative electronic impact of each ligand with respect to a coordinated metal center's electron-richness has been examined using comparative molybdenum and platinum model carbonyl and alkyl complexes. Complexes supported by anionic [1] are shown to be more electron-rich than those supported by 2 and 3. A study of the temperature and THF dependence of the rate of THF self-exchange between neutral, formally zwitterionic [Ph(2)BP(2)]Pt(Me)(THF) (13) and its cationic relative [(Ph(2)SiP(2))Pt(Me)(THF)][B(C(6)F(5))(4)] (14) demonstrates that different exchange mechanisms are operative for the two systems. Whereas cationic 14 displays THF-dependent, associative THF exchange in benzene, the mechanism of THF exchange for neutral 13 appears to be a THF independent, ligand-assisted process involving an anchimeric, eta(3)-binding mode of the [Ph(2)BP(2)] ligand. The methyl solvento species 13, 14, and [(dppp)Pt(Me)(THF)][B(C(6)F(5))(4)] (15), each undergo a C-H bond activation reaction with benzene that generates their corresponding phenyl solvento complexes [Ph(2)BP(2)]Pt(Ph)(THF) (16), [(Ph(2)SiP(2))Pt(Ph)(THF)][B(C(6)F(5))(4)] (17), and [(dppp)Pt(Ph)(THF)][B(C(6)F(5))(4)] (18). Examination of the kinetics of each C-H bond activation process shows that neutral 13 reacts faster than both of the cations 14 and 15. The magnitude of the primary kinetic isotope effect measured for the neutral versus the cationic systems also differs markedly (k(C(6)H(6))/k(C(6)D(6)): 13 = 1.26; 14 = 6.52; 15 approximately 6). THF inhibits the rate of the thermolysis reaction in all three cases. Extended thermolysis of 17 and 18 results in an aryl coupling process that produces the dicationic, biphenyl-bridged platinum dimers [[(Ph(2)SiP(2))Pt](2

  9. Unprecedented Reaction Pathway of Sterically Crowded Calcium Complexes: Sequential C-N Bond Cleavage Reactions Induced by C-H Bond Activations.

    Science.gov (United States)

    Yang, Yang; Wang, Haobing; Ma, Haiyan

    2017-01-17

    Five bis(quinolylmethyl)-(1H-indolylmethyl)amine (BQIA) compounds, that is, {(quinol-8-yl-CH2 )2 NCH2 (3-Br-1H-indol-2-yl)} (L(1) H) and {[(8-R(3) -quinol-2-yl)CH2 ]2 NCH(R(2) )[3-R(1) -1H-indol-2-yl]} (L(2-5) H) (L(2) H: R(1) =Br, R(2) =H, R(3) =H; L(3) H: R(1) =Br, R(2) =H, R(3) =iPr; L(4) H: R(1) =H, R(2) =CH3 , R(3) =iPr; L(5) H: R(1) =H, R(2) =nBu, R(3) =iPr) were synthesized and used to prepare calcium complexes. The reactions of L(1-5) H with silylamido calcium precursors (Ca[N(SiMe2 R)2 ]2 (THF)2 , R=Me or H) at room temperature gave heteroleptic products (L(1, 2) )CaN(SiMe3 )2 (1, 2), (L(3, 4) )CaN(SiHMe2 )2 (3 a, 4 a) and homoleptic complexes (L(3, 5) )2 Ca (D3, D5). NMR and X-ray analyses proved that these calcium complexes were stabilized through Ca⋅⋅⋅C-Si, Ca⋅⋅⋅H-Si or Ca⋅⋅⋅H-C agostic interactions. Unexpectedly, calcium complexes ((L(3-5) )CaN(SiMe3 )2 ) bearing more sterically encumbered ligands of the same type were extremely unstable and underwent C-N bond cleavage processes as a consequence of intramolecular C-H bond activation, leading to the exclusive formation of (E)-1,2-bis(8-isopropylquinol-2-yl)ethane. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Guiding catalytically active particles with chemically patterned surfaces

    CERN Document Server

    Uspal, W E; Dietrich, S; Tasinkevych, M

    2016-01-01

    Catalytically active Janus particles suspended in solution create gradients in the chemical composition of the solution along their surfaces, as well as along any nearby container walls. The former leads to self-phoresis, while the latter gives rise to chemi-osmosis, providing an additional contribution to self-motility. Chemi-osmosis strongly depends on the molecular interactions between the diffusing chemical species and the wall. We show analytically, using an approximate "point-particle" approach, that by chemically patterning a planar substrate one can direct the motion of Janus particles: the induced chemi-osmotic flows can cause particles to either "dock" at the chemical step between the two materials, or to follow a chemical stripe. These theoretical predictions are confirmed by full numerical calculations. Generically, docking occurs for particles which tend to move away from their catalytic caps, while stripe-following occurs in the opposite case. Our analysis reveals the physical mechanisms governi...

  11. DFT Mechanistic Study of Rh(III)-Catalyzed [3 + 2]/[5 + 2] Annulation of 4-Aryl-1,2,3-triazoles and Alkynes Unveils the Dual C-H Activation Strategy.

    Science.gov (United States)

    Zhang, Zhongchao; Yang, Shengwen; Li, Juan; Liao, Xiaojian

    2016-10-21

    Li and co-workers recently developed a dual C-H bond activation strategy, using a Rh(III) catalyst, for [3 + 2]/[5 + 2] annulation of primary 4-aryl-1,2,3-triazoles and alkynes. The Rh(III)-catalyzed dual annulation of 4-aryl-1,2,3-triazoles and alkynes is challenging because only single annulation is achieved using Rh(II) and Ni(0) catalysts. Intrigued by the novel strategy, we performed a density functional theory study to unravel this challenging dual C-H bond activation. A Friedel-Crafts type mechanism proved be more favorable than a concerted metalation-deprotonation (CMD) mechanism for the first C-H bond activation. The second C-H bond activation proceeded via a CMD mechanism. More importantly, the calculation explained why only AgSbF6, among several candidates, performed perfectly, whereas others failed, and why the dual annulation of 4-aryl-1,2,3-triazoles with alkynes was achieved with a Rh(III) catalyst but not with Rh(II) and Ni(0) catalysts. Due to the active catalyst being [Cp*Rh(OAc)](+), AgSbF6, in which SbF6(-) is a stable anion, among several candidates performed perfectly. The success of the Rh(III)-catalyzed dual C-H bond activation has two origins: (i) the active catalyst [Cp*Rh(OAc)](+) is more stable than Cp*Rh(OAc)2 when the Ag salt is AgSbF6, and this facilitates the first alkyne insertion; and (ii) a rhodium-carbene is easily formed.

  12. Catalytically and biologically active silver nanoparticles synthesized using essential oil

    Science.gov (United States)

    Vilas, Vidya; Philip, Daizy; Mathew, Joseph

    2014-11-01

    There are numerous reports on phytosynthesis of silver nanoparticles and various phytochemicals are involved in the reduction and stabilization. Pure explicit phytosynthetic protocol for catalytically and biologically active silver nanoparticles is of importance as it is an environmentally benign green method. This paper reports the use of essential oil of Myristica fragrans enriched in terpenes and phenyl propenes in the reduction and stabilization. FTIR spectra of the essential oil and the synthesized biogenic silver nanoparticles are in accordance with the GC-MS spectral analysis reports. Nanosilver is initially characterized by an intense SPR band around 420 nm, followed by XRD and TEM analysis revealing the formation of 12-26 nm sized, highly pure, crystalline silver nanoparticles. Excellent catalytic and bioactive potential of the silver nanoparticles is due to the surface modification. The chemocatalytic potential of nanosilver is exhibited by the rapid reduction of the organic pollutant, para nitro phenol and by the degradation of the thiazine dye, methylene blue. Significant antibacterial activity of the silver colloid against Gram positive, Staphylococcus aureus (inhibition zone - 12 mm) and Gram negative, Escherichia coli (inhibition zone - 14 mm) is demonstrated by Agar-well diffusion method. Strong antioxidant activity of the biogenic silver nanoparticles is depicted through NO scavenging, hydrogen peroxide scavenging, reducing power, DPPH and total antioxidant activity assays.

  13. Dioxygen activation by a non-heme iron(II) complex: formation of an iron(IV)-oxo complex via C-H activation by a putative iron(III)-superoxo species.

    Science.gov (United States)

    Lee, Yong-Min; Hong, Seungwoo; Morimoto, Yuma; Shin, Woonsup; Fukuzumi, Shunichi; Nam, Wonwoo

    2010-08-11

    Iron(III)-superoxo intermediates are believed to play key roles in oxygenation reactions by non-heme iron enzymes. We now report that a non-heme iron(II) complex activates O(2) and generates its corresponding iron(IV)-oxo complex in the presence of substrates with weak C-H bonds (e.g., olefins and alkylaromatic compounds). We propose that a putative iron(III)-superoxo intermediate initiates the O(2)-activation chemistry by abstracting a H atom from the substrate, with subsequent generation of a high-valent iron(IV)-oxo intermediate from the resulting iron(III)-hydroperoxo species.

  14. Copper on activated carbon for catalytic wet air oxidation

    Directory of Open Access Journals (Sweden)

    Nora Dolores Martínez

    2009-03-01

    Full Text Available Textile industry is an important source of water contamination. Some of the organic contaminants cannot be eliminated by nature in a reasonable period. Heterogeneous catalytic wet air oxidation is one of the most effective methods to purify wastewater with organic contaminants. In this work, catalysts based on copper supported on activated carbon were synthesized. The activated carbons were obtained from industrial wastes (apricot core and grape stalk of San Juan, Argentina. These were impregnated with a copper salt and thermically treated in an inert atmosphere. Analysis of specific surface, pore volume, p zc, acidity, basicity and XRD patterns were made in order to characterize the catalysts. The catalytic activity was tested in the oxidation of methylene blue (MB and polyvinyl alcohol (PVA in aqueous phase with pure oxygen. Reaction tests were carried out in a Parr batch reactor at different temperatures, with a 0.2 MPa partial pressure of oxygen. The amount of unconverted organics was measured by spectrophotometry. Higher temperatures were necessary for the degradation of PVA compared to those for methylene blue.

  15. N-Doped Cationic PAHs by Rh(III)-Catalyzed Double C-H Activation and Annulation of 2-Arylbenzimidazoles with Alkynes.

    Science.gov (United States)

    Villar, José M; Suárez, Jaime; Varela, Jesús A; Saá, Carlos

    2017-03-16

    A novel class of N-doped cationic PAHs (polycyclic aromatic hydrocarbons) bearing the benzo[c,d]fluoranthene scaffold has been synthesized by the Rh(III)-catalyzed double-oxidative annulation of 2-arylbenzimidazoles with alkynes. The overall process involves a double C-N bond formation through a double C-H/N-H functionalization.The solid-state structures and electronic properties of the new N-doped PAHs were analyzed. These cationic azapolycycles were readily reduced in the presence of LiAlH4 or by the addition of PhLi to give interesting phenyl and diphenylmethanediamine derivatives.

  16. Computational Exploration of Rh(III)/Rh(V) and Rh(III)/Rh(I) Catalysis in Rhodium(III)-Catalyzed C-H Activation Reactions of N-Phenoxyacetamides with Alkynes.

    Science.gov (United States)

    Yang, Yun-Fang; Houk, K N; Wu, Yun-Dong

    2016-06-01

    The selective rhodium-catalyzed functionalization of arenes is greatly facilitated by oxidizing directing groups that act both as directing groups and internal oxidants. We report density functional theory (B3LYP and M06) investigations on the mechanism of rhodium(III)-catalyzed redox coupling reaction of N-phenoxyacetamides with alkynes. The results elucidated the role of the internal oxidizing directing group, and the role of Rh(III)/Rh(I) and Rh(III)/Rh(V) catalysis of C-H functionalizations. A novel Rh(III)-Rh(V)-Rh(III) cycle successfully rationalizes recent experimental observations by Liu and Lu et al. ( Liu , G. Angew. Chem. Int. Ed. 2013 , 52 , 6033 ) on the reactions of N-phenoxyacetamides with alkynes in different solvents. Natural Bond Orbital (NBO) analysis confirms the identity of Rh(V) intermediate in the catalytic cycle.

  17. Active groups for oxidative activation of C-H bond in C{sub 2}-C{sub 5} paraffins on V-P-O catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Zazhigalov, V.A. [AN Ukrainskoj SSR, Kiev (Ukraine). Inst. Fizicheskoj Khimii

    1998-12-31

    For the first time in scientific literature, in our joint work with Dr. G. Ladwig in 1978 it was established phase portraite of the oxide vanadium-phosphorus system within wide range of P/V ratios from 0.5 to 3.2. Some later those data were confirmed. By investigation of the properties of individual vanadium-phosphorus phases it was also shown that the active component of such catalysts in n-butane oxidation was vanadyl pyrophosphate phase (VO){sub 2}Pr{sub 2}O{sub 7}. From then the conclusion has been evidenced by numerous publications and at present it has been out of doubt practically all over the world. It was hypothized that the unique properties of (VO){sub 2}P{sub 2}O{sub 7} in the reaction of n-butane oxidation could be explained by the presence of paired vanadyl groups and nearness of the distances between neighbouring vanadyl pairs and that between the first and fourth carbon atoms in n-butane molecule. The molecule activation occured at the latter atoms by proton abstraction. A comparison of the results on n-butane and butenes oxidation over vanadyl pyrophosphate allowed to conclude that the paraffin oxidation did not take place due to the molecule dehydrogenation process at the first stage of its conversion. Up to now, more than 100 papers related to paraffins oxidation over vanadyl pyrophosphate and the physico-chemical properties of the catalyst have been published. The process of n-butane oxidation is realized in practice. But still, the question about the nature of active sites of the catalyst and the reaction mechanism remains open and provokes further investigations. The present paper deals with our opinion about the problem and the experimental results supporting it. (orig.)

  18. Direct instrumental identification of catalytically active surface sites

    Science.gov (United States)

    Pfisterer, Jonas H. K.; Liang, Yunchang; Schneider, Oliver; Bandarenka, Aliaksandr S.

    2017-09-01

    The activity of heterogeneous catalysts—which are involved in some 80 per cent of processes in the chemical and energy industries—is determined by the electronic structure of specific surface sites that offer optimal binding of reaction intermediates. Directly identifying and monitoring these sites during a reaction should therefore provide insight that might aid the targeted development of heterogeneous catalysts and electrocatalysts (those that participate in electrochemical reactions) for practical applications. The invention of the scanning tunnelling microscope (STM) and the electrochemical STM promised to deliver such imaging capabilities, and both have indeed contributed greatly to our atomistic understanding of heterogeneous catalysis. But although the STM has been used to probe and initiate surface reactions, and has even enabled local measurements of reactivity in some systems, it is not generally thought to be suited to the direct identification of catalytically active surface sites under reaction conditions. Here we demonstrate, however, that common STMs can readily map the catalytic activity of surfaces with high spatial resolution: we show that by monitoring relative changes in the tunnelling current noise, active sites can be distinguished in an almost quantitative fashion according to their ability to catalyse the hydrogen-evolution reaction or the oxygen-reduction reaction. These data allow us to evaluate directly the importance and relative contribution to overall catalyst activity of different defects and sites at the boundaries between two materials. With its ability to deliver such information and its ready applicability to different systems, we anticipate that our method will aid the rational design of heterogeneous catalysts.

  19. Guiding catalytically active particles with chemically patterned surfaces

    Science.gov (United States)

    Uspal, William; Popescu, Mihail; Dietrich, Siegfried; Tasinkevych, Mykola

    Catalytically active Janus particles in solution create gradients in the chemical composition of the solution along their surfaces, as well as along any nearby container walls. The former leads to self-phoresis, while the latter gives rise to chemi-osmosis, providing an additional contribution to self-motility. Chemi-osmosis strongly depends on the molecular interactions between the diffusing chemical species and the wall. We show analytically, using an approximate ``point-particle'' approach, that by chemically patterning a planar substrate (e.g., by adsorbing two different materials) one can direct the motion of Janus particles: the induced chemi-osmotic flows can cause particles to either ``dock'' at a chemical step between the two materials, or to follow a chemical stripe. These theoretical predictions are confirmed by full numerical calculations. Generically, docking occurs for particles which tend to move away from their catalytic caps, while stripe-following occurs in the opposite case. Our analysis reveals the physical mechanisms governing this behavior.

  20. Role of Lewis acid additives in a palladium catalyzed directed C-H functionalization reaction of benzohydroxamic acid to isoxazolone.

    Science.gov (United States)

    Athira, C; Sunoj, Raghavan B

    2016-12-20

    Metallic salts as well as protic additives are widely employed in transition metal catalyzed C-H bond functionalization reactions to improve the efficiency of catalytic protocols. In one such example, ZnCl2 and pivalic acid are used as additives in a palladium catalyzed synthesis of isoxazolone from a readily available benzohydroxamic acid under one pot conditions. In this article, we present some important mechanistic insights into the role of ZnCl2 and pivalic acid, gained by using density functional theory (M06) computations. Two interesting modes of action of ZnCl2 are identified in various catalytic steps involved in the formation of isoxazolone. The conventional Lewis acid coordination wherein zinc chloride (ZnCl2·(DMA)) binds to the carbonyl group is found to be more favored in the C-H activation step. However, the participation of a hetero-bimetallic Pd-Zn species is preferred in reductive elimination leading to Caryl-N bond formation. Pivalic acid helps in relay proton transfer in C-H bond activation through a cyclometallation deprotonation (CMD) process. The explicit inclusion of ZnCl2 and solvent N,N-dimethyl acetamide (DMA) stabilizes the transition state and also helps reduce the activation barrier for the C-H bond activation step. The electronic communication between the two metal species is playing a crucial role in stabilizing the Caryl-N bond formation transition state through a Pd-Zn hetero-bimetallic interaction.

  1. Unexpected formation of chiral pincer CNN nickel complexes with β-diketiminato type ligands via C-H activation: synthesis, properties, structures, and computational studies.

    Science.gov (United States)

    Lu, Zhengliang; Abbina, Srinivas; Sabin, Jared R; Nemykin, Victor N; Du, Guodong

    2013-02-04

    Reaction of lithiated chiral, unsymmetric β-diketimine type ligands HL(2a-e) containing oxazoline moiety (HL(2a-e) = 2-(2'-R(1)NH)-phenyl-4-R(2)-oxazoline) with trans-NiCl(Ph)(PPh(3))(2) afforded a series of new chiral CNN pincer type nickel complexes (3a-3e) via an unexpected cyclometalation at benzylic or aryl C-H positions. Single crystal X-ray diffraction analysis established the pincer coordination mode and the strained conformation. Chirality, and in one case, racemization of the target nickel complexes were confirmed by circular dichroism (CD) spectroscopy. Electronic structure and band assignments in experimental UV-vis and CD spectra were discussed on the basis of Density Functional Theory (DFT) and time-dependent (TD) DFT calculations.

  2. Correlating Reactivity and Selectivity to Cyclopentadienyl Ligand Properties in Rh(III)-Catalyzed C-H Activation Reactions: An Experimental and Computational Study.

    Science.gov (United States)

    Piou, Tiffany; Romanov-Michailidis, Fedor; Romanova-Michaelides, Maria; Jackson, Kelvin E; Semakul, Natthawat; Taggart, Trevor D; Newell, Brian S; Rithner, Christopher D; Paton, Robert S; Rovis, Tomislav

    2017-01-25

    Cp(X)Rh(III)-catalyzed C-H functionalization reactions are a proven method for the efficient assembly of small molecules. However, rationalization of the effects of cyclopentadienyl (Cp(X)) ligand structure on reaction rate and selectivity has been viewed as a black box, and a truly systematic study is lacking. Consequently, predicting the outcomes of these reactions is challenging because subtle variations in ligand structure can cause notable changes in reaction behavior. A predictive tool is, nonetheless, of considerable value to the community as it would greatly accelerate reaction development. Designing a data set in which the steric and electronic properties of the Cp(X)Rh(III) catalysts were systematically varied allowed us to apply multivariate linear regression algorithms to establish correlations between these catalyst-based descriptors and the regio-, diastereoselectivity, and rate of model reactions. This, in turn, led to the development of quantitative predictive models that describe catalyst performance. Our newly described cone angles and Sterimol parameters for Cp(X) ligands served as highly correlative steric descriptors in the regression models. Through rational design of training and validation sets, key diastereoselectivity outliers were identified. Computations reveal the origins of the outstanding stereoinduction displayed by these outliers. The results are consistent with partial η(5)-η(3) ligand slippage that occurs in the transition state of the selectivity-determining step. In addition to the instructive value of our study, we believe that the insights gained are transposable to other group 9 transition metals and pave the way toward rational design of C-H functionalization catalysts.

  3. Size Effect of Gold Sol/γ-Alumina on the Catalytic Activities of CO Oxidation

    Institute of Scientific and Technical Information of China (English)

    WANG Wei-Hua; GAO Geng-Yu

    2006-01-01

    The relationship between particle size and catalytic activity of gold nanoparticle catalysts with γ-Al2O3 as support has been investigated. The catalysts were prepared via the gold sol with different particle sizes by micelle method, and their structures were characterized by HRTEM and XRD, respectively. Furthermore, the catalytic activities were tested by CO oxidation. Experimental results showed that the catalytic activity became much weaker when gold particles were increased from 3.2 to 6.6 nm. Additionally, the particle size was also a key factor to govern catalytic activity with regard to gold supported on TiO2 prepared by the methods of deposition-precipitation.

  4. Cobalt-Catalyzed Oxidative C-H/C-H Cross-Coupling between Two Heteroarenes.

    Science.gov (United States)

    Tan, Guangying; He, Shuang; Huang, Xiaolei; Liao, Xingrong; Cheng, Yangyang; You, Jingsong

    2016-08-22

    The first example of cobalt-catalyzed oxidative C-H/C-H cross-coupling between two heteroarenes is reported, which exhibits a broad substrate scope and a high tolerance level for sensitive functional groups. When the amount of Co(OAc)2 ⋅4 H2 O is reduced from 6.0 to 0.5 mol %, an excellent yield is still obtained at an elevated temperature with a prolonged reaction time. The method can be extended to the reaction between an arene and a heteroarene. It is worth noting that the Ag2 CO3 oxidant is renewable. Preliminary mechanistic studies by radical trapping experiments, hydrogen/deuterium exchange experiments, kinetic isotope effect, electron paramagnetic resonance (EPR), and high resolution mass spectrometry (HRMS) suggest that a single electron transfer (SET) pathway is operative, which is distinctly different from the dual C-H bond activation pathway that the well-described oxidative C-H/C-H cross-coupling reactions between two heteroarenes typically undergo.

  5. The amide C-N bond of isatins as the directing group and the internal oxidant in Ru-catalyzed C-H activation and annulation reactions: access to 8-amido isocoumarins.

    Science.gov (United States)

    Kaishap, Partha Pratim; Sarma, Bipul; Gogoi, Sanjib

    2016-07-28

    The N-O, N-N and O-O bonds are the frequently used internally oxidative directing groups used in various redox-neutral coupling reactions. The sole use of the C-N bond as the oxidizing directing group was reported recently by Li X. and co-workers for the Rh(iii)-catalyzed C-H activation of phenacyl ammonium salts. Herein, we report the use of the amide C-N bond of isatins as the oxidizing directing group for the Ru(ii)-catalyzed redox-neutral C-H activation and annulation reactions with alkynes which afford 8-amido isocoumarins. The reaction also features excellent regioselectivity with alkyl aryl substituted alkynes.

  6. Synthesis, structure characterization and catalytic activity of nickel tungstate nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Pourmortazavi, Seied Mahdi, E-mail: pourmortazavi@yahoo.com [Faculty of Material and Manufacturing Technologies, Malek Ashtar University of Technology, Tehran (Iran, Islamic Republic of); Rahimi-Nasrabadi, Mehdi, E-mail: rahiminasrabadi@gmail.com [Department of Chemistry, Imam Hossein University, Tehran (Iran, Islamic Republic of); Khalilian-Shalamzari, Morteza [Department of Chemistry, Imam Hossein University, Tehran (Iran, Islamic Republic of); Zahedi, Mir Mahdi; Hajimirsadeghi, Seiedeh Somayyeh [Islamic Azad University, Varamin Pishva Branch, Varamin (Iran, Islamic Republic of); Omrani, Ismail [Department of Chemistry, Imam Hossein University, Tehran (Iran, Islamic Republic of)

    2012-12-15

    Graphical abstract: NiWO{sub 4} nanoparticles were prepared via precipitation technique. Experimental parameters of procedure were optimized statistically. Highlights: Black-Right-Pointing-Pointer NiWO{sub 4} spherical nanoparticles were synthesized via direct precipitation method. Black-Right-Pointing-Pointer Taguchi robust design was used for optimization of synthesis reaction parameters. Black-Right-Pointing-Pointer Composition and structural properties of NiWO{sub 4} nanoparticles were characterized. Black-Right-Pointing-Pointer EDAX, XRD, SEM, FT-IR, UV-vis and photoluminescence techniques were employed. Black-Right-Pointing-Pointer Catalytic activity of the product in a cyclo-addition reaction was investigated. - Abstract: Taguchi robust design was applied to optimize experimental parameters for controllable, simple and fast synthesis of nickel tungstate nanoparticles. NiWO{sub 4} nanoparticles were synthesized by precipitation reaction involving addition of nickel ion solution to the tungstate aqueous reagent and then formation of nickel tungstate nucleolus which are insoluble in aqueous media. Effects of various parameters such as nickel and tungstate concentrations, flow rate of reagent addition and reactor temperature on diameter of synthesized nickel tungstate nanoparticles were investigated experimentally by the aid of orthogonal array design. The results for analysis of variance (ANOVA) showed that particle size of nickel tungstate can be effectively tuned by controlling significant variables involving nickel and tungstate concentrations and flow rate; while, temperature of the reactor has a no considerable effect on the size of NiWO{sub 4} particles. The ANOVA results proposed the optimum conditions for synthesis of nickel tungstate nanoparticles via this technique. Also, under optimum condition nanoparticles of NiWO{sub 4} were prepared and their structure and chemical composition were characterized by means of EDAX, XRD, SEM, FT-IR spectroscopy, UV

  7. Rh(III)-Catalyzed Cascade Annulation/C-H Activation of o-Ethynylanilines with Diazo Compounds: One-Pot Synthesis of Benzo[a]carbazoles via 1,4-Rhodium Migration.

    Science.gov (United States)

    Guo, Songjin; Yuan, Kai; Gu, Meng; Lin, Aijun; Yao, Hequan

    2016-10-05

    A Rh(III)-catalyzed cascade annulation/C-H activation of o-ethynylanilines with diazo compounds has been developed. This concise method allows for the rapid formation of a number of benzo[a]carbazoles in high yields, exhibiting good functional group tolerance and scalability. The key to the success of this approach involves one C-N bond and two C-C bond formation, and an aryl-to-aryl 1,4-rhodium migration.

  8. C-H fluorination: U can fluorinate unactivated bonds

    Science.gov (United States)

    Neumann, Constanze N.; Ritter, Tobias

    2016-09-01

    Introducing C-F bonds into organic molecules is a challenging task, particularly through C-H activation methods. Now, a uranium-based photocatalyst turns traditional selectivity rules on their heads and fluorinates unfunctionalized alkane Csp3-H bonds, even in the presence of C-H bonds that are typically more reactive.

  9. Using a non-spin flip model to rationalize the irregular patterns observed in the activation of the C-H and Si-H bonds of small molecules by CpMCO (M = Co, Rh) complexes.

    Science.gov (United States)

    Castro, Guadalupe; Colmenares, Fernando

    2017-09-20

    The activation of the C-H and Si-H bonds of CH(CH3)3 and SiH(CH3)3 molecules by organometallic compounds CpMCO (M = Co, Rh) has been investigated through DFT and CASSCF-MRMP2 calculations. In particular, we have analyzed the pathways joining the lowest-lying triplet and singlet states of the reactants with the products arising from the insertion of the metal atom into the C-H or Si-H bonds of the organic molecules. Channels connecting the reactants with the inserted structure Cp(CO)H-M-C(CH3)3 through the oxidative addition of the C-H bond of the organic molecule to the metal fragment were found only for the reaction CpRhCO + CH(CH3)3. However, inserted structures could also be obtained for the interactions of SiH(CH3)3 with CpCoCO and CpRhCO by two sequential reactions involving the formation and rebounding of the radical fragments Cp(CO)H-M + Si(CH3)3. According to this two-step reaction scheme, the complex CpCoCO is unable to activate the C-H bond of the CH(CH3)3 molecule due to the high energy at which the radical fragments Cp(CO)H-M + C(CH3)3 are located. The picture attained for these interactions is consistent with the available experimental data for this kind of reaction and allows rationalization of the differences in the reactivity patterns determined for them without using spin-flip models, as has been proposed in previous studies.

  10. Synthesis and catalytic activity of polysaccharide templated nanocrystalline sulfated zirconia

    Energy Technology Data Exchange (ETDEWEB)

    Sherly, K. B.; Rakesh, K. [Mahatma Gandhi University Regional Research Center in Chemistry, Department of Chemistry, Mar Athanasius College, Kothamangalam-686666, Kerala (India)

    2014-01-28

    Nanoscaled materials are of great interest due to their unique enhanced optical, electrical and magnetic properties. Sulfate-promoted zirconia has been shown to exhibit super acidic behavior and high activity for acid catalyzed reactions. Nanocrystalline zirconia was prepared in the presence of polysaccharide template by interaction between ZrOCl{sub 2}⋅8H{sub 2}O and chitosan template. The interaction was carried out in aqueous phase, followed by the removal of templates by calcination at optimum temperature and sulfation. The structural and textural features were characterized by powder XRD, TG, SEM and TEM. XRD patterns showed the peaks of the diffractogram were in agreement with the theoretical data of zirconia with the catalytically active tetragonal phase and average crystalline size of the particles was found to be 9 nm, which was confirmed by TEM. TPD using ammonia as probe, FTIR and BET surface area analysis were used for analyzing surface features like acidity and porosity. The BET surface area analysis showed the sample had moderately high surface area. FTIR was used to find the type species attached to the surface of zirconia. UV-DRS found the band gap of the zirconia was found to be 2.8 eV. The benzylation of o-xylene was carried out batchwise in atmospheric pressure and 433K temperature using sulfated zirconia as catalyst.

  11. Synthesis and catalytic activity of polysaccharide templated nanocrystalline sulfated zirconia

    Science.gov (United States)

    Sherly, K. B.; Rakesh, K.

    2014-01-01

    Nanoscaled materials are of great interest due to their unique enhanced optical, electrical and magnetic properties. Sulfate-promoted zirconia has been shown to exhibit super acidic behavior and high activity for acid catalyzed reactions. Nanocrystalline zirconia was prepared in the presence of polysaccharide template by interaction between ZrOCl2ṡ8H2O and chitosan template. The interaction was carried out in aqueous phase, followed by the removal of templates by calcination at optimum temperature and sulfation. The structural and textural features were characterized by powder XRD, TG, SEM and TEM. XRD patterns showed the peaks of the diffractogram were in agreement with the theoretical data of zirconia with the catalytically active tetragonal phase and average crystalline size of the particles was found to be 9 nm, which was confirmed by TEM. TPD using ammonia as probe, FTIR and BET surface area analysis were used for analyzing surface features like acidity and porosity. The BET surface area analysis showed the sample had moderately high surface area. FTIR was used to find the type species attached to the surface of zirconia. UV-DRS found the band gap of the zirconia was found to be 2.8 eV. The benzylation of o-xylene was carried out batchwise in atmospheric pressure and 433K temperature using sulfated zirconia as catalyst.

  12. Synthesis, structure characterization and catalytic activity of nickel tungstate nanoparticles

    Science.gov (United States)

    Pourmortazavi, Seied Mahdi; Rahimi-Nasrabadi, Mehdi; Khalilian-Shalamzari, Morteza; Zahedi, Mir Mahdi; Hajimirsadeghi, Seiedeh Somayyeh; Omrani, Ismail

    2012-12-01

    Taguchi robust design was applied to optimize experimental parameters for controllable, simple and fast synthesis of nickel tungstate nanoparticles. NiWO4 nanoparticles were synthesized by precipitation reaction involving addition of nickel ion solution to the tungstate aqueous reagent and then formation of nickel tungstate nucleolus which are insoluble in aqueous media. Effects of various parameters such as nickel and tungstate concentrations, flow rate of reagent addition and reactor temperature on diameter of synthesized nickel tungstate nanoparticles were investigated experimentally by the aid of orthogonal array design. The results for analysis of variance (ANOVA) showed that particle size of nickel tungstate can be effectively tuned by controlling significant variables involving nickel and tungstate concentrations and flow rate; while, temperature of the reactor has a no considerable effect on the size of NiWO4 particles. The ANOVA results proposed the optimum conditions for synthesis of nickel tungstate nanoparticles via this technique. Also, under optimum condition nanoparticles of NiWO4 were prepared and their structure and chemical composition were characterized by means of EDAX, XRD, SEM, FT-IR spectroscopy, UV-vis spectroscopy, and photoluminescence. Finally, catalytic activity of the nanoparticles in a cycloaddition reaction was examined.

  13. Tailoring micro-mesoporosity in activated carbon fibers to enhance SO₂ catalytic oxidation.

    Science.gov (United States)

    Diez, Noel; Alvarez, Patricia; Granda, Marcos; Blanco, Clara; Gryglewicz, Grażyna; Wróbel-Iwaniec, Iwona; Sliwak, Agata; Machnikowski, Jacek; Menendez, Rosa

    2014-08-15

    Enhanced SO2 adsorption of activated carbon fibers is obtained by tailoring a specific micro-mesoporous structure in the fibers. This architecture is obtained via metal catalytic activation of the fibers with a novel precursor, cobalt naphthenate, which contrary to other precursors, also enhances spinnability and carbon fiber yield. In the SO2 oxidation, it is demonstrated that the combination of micropores and large mesopores is the main factor for an enhanced catalytic activity which is superior to that observed in other similar microporous activated carbon fibers. This provides an alternative way for the development of a new generation of catalytic material.

  14. Nanoscale mapping of catalytic activity using tip-enhanced Raman spectroscopy.

    Science.gov (United States)

    Kumar, N; Stephanidis, B; Zenobi, R; Wain, A J; Roy, D

    2015-04-28

    Chemical mapping of a photocatalytic reaction with nanoscale spatial resolution is demonstrated for the first time using tip-enhanced Raman spectroscopy (TERS). An ultrathin alumina film applied to the Ag-coated TERS tip blocks catalytic interference whilst maintaining near-field electromagnetic enhancement, thus enabling spectroscopic imaging of catalytic activity on nanostructured Ag surfaces.

  15. Graphene incorporated, N doped activated carbon as catalytic electrode in redox active electrolyte mediated supercapacitor

    Science.gov (United States)

    Gao, Zhiyong; Liu, Xiao; Chang, Jiuli; Wu, Dapeng; Xu, Fang; Zhang, Lingcui; Du, Weimin; Jiang, Kai

    2017-01-01

    Graphene incorporated, N doped activated carbons (GNACs) are synthesized by alkali activation of graphene-polypyrrole composite (G-PPy) at different temperatures for application as electrode materials of supercapacitors. Under optimal activation temperature of 700 °C, the resultant samples, labeled as GNAC700, owns hierarchically porous texture with high specific surface area and efficient ions diffusion channels, N, O functionalized surface with apparent pseudocapacitance contribution and high wettability, thus can deliver a moderate capacitance, a high rate capability and a good cycleability when used as supercapacitor electrode. Additionally, the GNAC700 electrode demonstrates high catalytic activity for the redox reaction of pyrocatechol/o-quinone pair in H2SO4 electrolyte, thus enables a high pseudocapacitance from electrolyte. Under optimal pyrocatechol concentration in H2SO4 electrolyte, the electrode capacitance of GNAC700 increases by over 4 folds to 512 F g-1 at 1 A g-1, an excellent cycleability is also achieved simultaneously. Pyridinic- N is deemed to be responsible for the high catalytic activity. This work provides a promising strategy to ameliorate the capacitive performances of supercapacitors via the synergistic interaction between redox-active electrolyte and catalytic electrodes.

  16. Synthesis and characterization of vanadium nanoparticles on activated carbon and their catalytic activity in thiophene hydrodesulphurization

    Energy Technology Data Exchange (ETDEWEB)

    Pinto, Susana [Centro de Catalisis, Petroleo y Petroquimica, Escuela de Quimica, Facultad de Ciencias, Universidad Central de Venezuela, AP, Caracas 40679 (Venezuela); Centro de Quimica Organometalica y Macromolecular, Facultad de Ciencias, Universidad Central de Venezuela, AP, Caracas 47778 (Venezuela); D' Ornelas, Lindora [Centro de Quimica Organometalica y Macromolecular, Facultad de Ciencias, Universidad Central de Venezuela, AP, Caracas 47778 (Venezuela); Betancourt, Paulino [Centro de Catalisis, Petroleo y Petroquimica, Escuela de Quimica, Facultad de Ciencias, Universidad Central de Venezuela, AP, Caracas 40679 (Venezuela)], E-mail: pbetanco@strix.ciens.ucv.ve

    2008-06-30

    Vanadium nanoparticles ({approx}7 nm) stabilized on activated carbon were synthesized by the reduction of VCl{sub 3}.3THF with K[BEt{sub 3}H]. This material was characterized by inductive coupled plasma-atomic emission spectroscopy (ICP-AES), high-resolution transmission electron microscopy (HRTEM) and X-ray photoelectron spectroscopy (XPS) analyses. The catalytic performance of the carbon-supported vanadium was studied using thiophene hydrodesulfurization (HDS) as model reaction at 300 deg. C and P = 1 atm. The catalytic activity of the vanadium carbide phase on the activated carbon carrier was more significant than that of the reference catalysts, alumina supported NiMoS. The method proposed for the synthesis of such a catalyst led to an excellent performance of the HDS process.

  17. An elusive hydridoaluminum(I) complex for facile C-H and C-O bond activation of ethers and access to its isolable hydridogallium(I) analogue: syntheses, structures, and theoretical studies.

    Science.gov (United States)

    Tan, Gengwen; Szilvási, Tibor; Inoue, Shigeyoshi; Blom, Burgert; Driess, Matthias

    2014-07-01

    The reaction of AlBr3 with 1 molar equiv of the chelating bis(N-heterocyclic carbene) ligand bis(N-Dipp-imidazole-2-ylidene)methylene (bisNHC, 1) affords [(bisNHC)AlBr2](+)Br(-) (2) as an ion pair in high yield, representing the first example of a bisNHC-Al(III) complex. Debromination of the latter with 1 molar equiv of K2Fe(CO)4 in tetrahydrofuran (THF) furnishes smoothly, in a redox reaction, the (bisNHC)(Br)Al[Fe(CO)4] complex 3, in which the Al(I) center is stabilized by the Fe(CO)4 moiety through Al(I):→Fe(0) coordination. Strikingly, the Br/H ligand exchange reactions of 3 using potassium hydride as a hydride source in THF or tetrahydropyran (THP) do not yield the anticipated hydridoaluminum(I) complex (bisNHC)Al(H)[Fe(CO)4] (4a) but instead lead to (bisNHC)Al(2-cyclo-OC4H7)[Fe(CO)4] (4) and (bisNHC)Al(2-cyclo-OC5H9)[Fe(CO)4] (5), respectively. The latter are generated via C-H bond activation at the α-carbon positions of THF and THP, respectively, in good yields with concomitant elimination of dihydrogen. This is the first example whereby a low-valent main-group hydrido complex facilitates metalation of sp(3) C-H bonds. Interestingly, when K[BHR3] (R = Et, sBu) is employed as a hydride source to react with 3 in THF, the reaction affords (bisNHC)Al(OnBu)[Fe(CO)4] (6) as the sole product through C-O bond activation and ring opening of THF. The mechanisms for these novel C-H and C-O bond activations mediated by the elusive hydridoaluminum(I) complex 4a were elucidated by density functional theory (DFT) calculations. In contrast, the analogous hydridogallium(I) complex (bisNHC)Ga(H)[Fe(CO)4] (9) can be obtained directly in high yield by the reaction of the (bisNHC)Ga(Cl)[Fe(CO)4] precursor 8 with 1 molar equiv of K[BHR3] (R = Et, sBu) in THF at room temperature. The isolation of 9 and its inertness toward cyclic ethers might be attributed to the higher electronegativity of gallium versus aluminum. The stronger Ga(I)-H bond, in turn, hampers α-C-H metalation

  18. CHARACTERIZATION OF IRON COMPLEXES SUPPORTED ON POLYMER AND THEIR CATALYTIC ACTIVITY IN BUTADIENE POLYMERIZATION

    Institute of Scientific and Technical Information of China (English)

    YU Guangqian; LI Yuliang; YANG Zhifan; WANG Hong

    1990-01-01

    Styrene-acrylic acid copolymer (SAAC)-supported iron complex (SAAC·Fe)was characterized and the effect of the characteristic parameters on the catalytic activity of the complex was investigated. IR spectrum suggested that the complex SAAC·Fe possesses a structure of(C) and the Fe-O bond is higher in covalency. R-C-O-Fe-O-Fe(C) The complex SAAC Fe with the structure of(C) showed a higher catalytic activity in butadiene polymerization. When Fe/- COOH molar ratio in SAAC·Fe was about 0.2 the complex gave optimum catalytic activity. The catalytic activity of SAAC Fe with the higher content of long sequence of acrylic acid units was low. When the content of the short sequence of acrylic acid units was predominant and at the same time the content of the short sequence was approximately equal to that of the long sequence for stryrene, the activity of the complex was high.

  19. Intermolecular C-H activation with an Ir-METAMORPhos piano-stool complex--multiple reaction steps at a reactive ligand.

    Science.gov (United States)

    Oldenhof, S; Lutz, M; van der Vlugt, J I; Reek, J N H

    2015-10-21

    Substrate activation by means of a reactive ligand is a topic of much interest. Herein we describe a stoichiometric anti-Markovnikov C-N bond formation involving ligand reactivity in multiple steps along the reaction coordinate, including ligand assisted substrate (de)protonation and C-N bond formation, as illustrated by a combined experimental, spectroscopic and computational study. This affords a highly unusual four-membered iridacycle bearing an exo-cyclic C=C double bond.

  20. Effects of FGFR2 kinase activation loop dynamics on catalytic activity

    Science.gov (United States)

    2017-01-01

    The structural mechanisms by which receptor tyrosine kinases (RTKs) regulate catalytic activity are diverse and often based on subtle changes in conformational dynamics. The regulatory mechanism of one such RTK, fibroblast growth factor receptor 2 (FGFR2) kinase, is still unknown, as the numerous crystal structures of the unphosphorylated and phosphorylated forms of the kinase domains show no apparent structural change that could explain how phosphorylation could enable catalytic activity. In this study, we use several enhanced sampling molecular dynamics (MD) methods to elucidate the structural changes to the kinase’s activation loop that occur upon phosphorylation. We show that phosphorylation favors inward motion of Arg664, while simultaneously favoring outward motion of Leu665 and Pro666. The latter structural change enables the substrate to bind leading to its resultant phosphorylation. Inward motion of Arg664 allows it to interact with the γ-phosphate of ATP as well as the substrate tyrosine. We show that this stabilizes the tyrosine and primes it for the catalytic phosphotransfer, and it may lower the activation barrier of the phosphotransfer reaction. Our work demonstrates the value of including dynamic information gleaned from computer simulation in deciphering RTK regulatory function. PMID:28151998

  1. Effects of FGFR2 kinase activation loop dynamics on catalytic activity.

    Science.gov (United States)

    Karp, Jerome M; Sparks, Samuel; Cowburn, David

    2017-02-01

    The structural mechanisms by which receptor tyrosine kinases (RTKs) regulate catalytic activity are diverse and often based on subtle changes in conformational dynamics. The regulatory mechanism of one such RTK, fibroblast growth factor receptor 2 (FGFR2) kinase, is still unknown, as the numerous crystal structures of the unphosphorylated and phosphorylated forms of the kinase domains show no apparent structural change that could explain how phosphorylation could enable catalytic activity. In this study, we use several enhanced sampling molecular dynamics (MD) methods to elucidate the structural changes to the kinase's activation loop that occur upon phosphorylation. We show that phosphorylation favors inward motion of Arg664, while simultaneously favoring outward motion of Leu665 and Pro666. The latter structural change enables the substrate to bind leading to its resultant phosphorylation. Inward motion of Arg664 allows it to interact with the γ-phosphate of ATP as well as the substrate tyrosine. We show that this stabilizes the tyrosine and primes it for the catalytic phosphotransfer, and it may lower the activation barrier of the phosphotransfer reaction. Our work demonstrates the value of including dynamic information gleaned from computer simulation in deciphering RTK regulatory function.

  2. Effects of FGFR2 kinase activation loop dynamics on catalytic activity.

    Directory of Open Access Journals (Sweden)

    Jerome M Karp

    2017-02-01

    Full Text Available The structural mechanisms by which receptor tyrosine kinases (RTKs regulate catalytic activity are diverse and often based on subtle changes in conformational dynamics. The regulatory mechanism of one such RTK, fibroblast growth factor receptor 2 (FGFR2 kinase, is still unknown, as the numerous crystal structures of the unphosphorylated and phosphorylated forms of the kinase domains show no apparent structural change that could explain how phosphorylation could enable catalytic activity. In this study, we use several enhanced sampling molecular dynamics (MD methods to elucidate the structural changes to the kinase's activation loop that occur upon phosphorylation. We show that phosphorylation favors inward motion of Arg664, while simultaneously favoring outward motion of Leu665 and Pro666. The latter structural change enables the substrate to bind leading to its resultant phosphorylation. Inward motion of Arg664 allows it to interact with the γ-phosphate of ATP as well as the substrate tyrosine. We show that this stabilizes the tyrosine and primes it for the catalytic phosphotransfer, and it may lower the activation barrier of the phosphotransfer reaction. Our work demonstrates the value of including dynamic information gleaned from computer simulation in deciphering RTK regulatory function.

  3. Manganese Catalyzed C-H Halogenation.

    Science.gov (United States)

    Liu, Wei; Groves, John T

    2015-06-16

    led to the discovery of the first Mn-catalyzed direct aliphatic C-H fluorination reactions utilizing simple, nucleophilic fluoride salts. Mechanistic studies and DFT calculations have revealed a trans-difluoromanganese(IV) species as the key fluorine transfer intermediate. In addition to catalyzing normal (19)F-fluorination reactions, manganese salen complexes were found to enable the incorporation of radioactive (18)F fluorine via C-H activation. This advance represented the first direct Csp(3)-H bond (18)F labeling with no-carrier-added [(18)F]fluoride and facilitated the late-stage labeling of drug molecules for PET imaging. Given the high reactivity and enzymatic-like selectively of metalloporphyrins, we envision that this new Heteroatom-Rebound Catalysis (HRC) strategy will find widespread application in the C-H functionalization arena and serve as an effective tool for forming new carbon-heteroatom bonds at otherwise inaccessible sites in target molecules.

  4. C-H and H-H bond activation via ligand dearomatization/rearomatization of a PN³P-rhodium(I) complex.

    Science.gov (United States)

    Wang, Yuan; Zheng, Bin; Pan, Yupeng; Pan, Chengling; He, Lipeng; Huang, Kuo-Wei

    2015-09-14

    A neutral complex PN(3)P-Rh(I)Cl (2) was prepared from a reaction of the PN(3)P pincer ligand (1) with [Rh(COD)Cl]2 (COD = 1,5-cyclooctadiene). Upon treatment with a suitable base, H-H and C(sp(2))-H activation reactions can be achieved through the deprotonation/reprotonation of one of the N-H arms and dearomatization/rearomatization of the central pyridine ring with the oxidation state of Rh remaining I.

  5. C-H and H-H Bond Activation via Ligand Dearomatization/Rearomatization of a PN3P-Rhodium(I) Complex

    KAUST Repository

    Huang, Kuo-Wei

    2015-04-13

    A neutral complex PN3P-Rh(I)Cl (2) was prepared from a reaction of the PN3P pincer ligand (1) with [Rh(COD)Cl]2 (COD = 1,5-cyclooctadiene). Upon treatment with a suitable base, H–H and Csp2–H activation reactions can be achieved through the deprotonation/reprotonation of one of the N–H arms and dearomatization/rearomatization of the central pyridine ring with the oxidation state of Rh remaining I.

  6. Degradation of paracetamol by catalytic wet air oxidation and sequential adsorption - Catalytic wet air oxidation on activated carbons

    Energy Technology Data Exchange (ETDEWEB)

    Quesada-Penate, I. [Universite de Toulouse, INPT, UPS, Laboratoire de Genie Chimique, 4, Allee Emile Monso, F-31432 Toulouse (France); CNRS, Laboratoire de Genie Chimique, F-31432 Toulouse (France); Julcour-Lebigue, C., E-mail: carine.julcour@ensiacet.fr [Universite de Toulouse, INPT, UPS, Laboratoire de Genie Chimique, 4, Allee Emile Monso, F-31432 Toulouse (France); CNRS, Laboratoire de Genie Chimique, F-31432 Toulouse (France); Jauregui-Haza, U.J. [Instituto Superior de Tecnologias y Ciencias Aplicadas, Ave. Salvador Allende y Luaces, Habana (Cuba); Wilhelm, A.M.; Delmas, H. [Universite de Toulouse, INPT, UPS, Laboratoire de Genie Chimique, 4, Allee Emile Monso, F-31432 Toulouse (France); CNRS, Laboratoire de Genie Chimique, F-31432 Toulouse (France)

    2012-06-30

    Highlights: Black-Right-Pointing-Pointer Three activated carbons (AC) compared as adsorbents and oxidation catalysts. Black-Right-Pointing-Pointer Similar evolution for catalytic and adsorptive properties of AC over reuses. Black-Right-Pointing-Pointer Acidic and mesoporous AC to be preferred, despite lower initial efficiency. Black-Right-Pointing-Pointer Oxidative degradation of paracetamol improves biodegradability. Black-Right-Pointing-Pointer Convenient hybrid adsorption-regenerative oxidation process for continuous treatment. - Abstract: The concern about the fate of pharmaceutical products has raised owing to the increasing contamination of rivers, lakes and groundwater. The aim of this paper is to evaluate two different processes for paracetamol removal. The catalytic wet air oxidation (CWAO) of paracetamol on activated carbon was investigated both as a water treatment technique using an autoclave reactor and as a regenerative treatment of the carbon after adsorption in a sequential fixed bed process. Three activated carbons (ACs) from different source materials were used as catalysts: two microporous basic ACs (S23 and C1) and a meso- and micro-porous acidic one (L27). During the first CWAO experiment the adsorption capacity and catalytic performance of fresh S23 and C1 were higher than those of fresh L27 despite its higher surface area. This situation changed after AC reuse, as finally L27 gave the best results after five CWAO cycles. Respirometry tests with activated sludge revealed that in the studied conditions the use of CWAO enhanced the aerobic biodegradability of the effluent. In the ADOX process L27 also showed better oxidation performances and regeneration efficiency. This different ageing was examined through AC physico-chemical properties.

  7. Size-dependent peroxidase-like catalytic activity of Fe3O4 nanoparticles

    Institute of Scientific and Technical Information of China (English)

    Fang Fang Peng; Yu Zhang; Ning Gu

    2008-01-01

    Peroxidase-like catalytic properties of Fe3O4 nanoparticles (NPs) with three different sizes, synthesized by chemical coprecipitation and sol-gel methods, were investigated by UV-vis spectrum analysis. By comparing Fe3O4 NPs with average diameters of 11,20, and 150 nm, we found that the catalytic activity increases with the reduced nanoparticle size. The electrochemical method to characterize the catalytic activity of Fe3O4 NPs using the response currents of the reaction product and substrate was also developed.

  8. Iridium Cyclooctene Complex That Forms a Hyperpolarization Transfer Catalyst before Converting to a Binuclear C-H Bond Activation Product Responsible for Hydrogen Isotope Exchange.

    Science.gov (United States)

    Iali, Wissam; Green, Gary G R; Hart, Sam J; Whitwood, Adrian C; Duckett, Simon B

    2016-11-21

    [IrCl(COE)2]2 (1) reacts with pyridine (py) and H2 to form crystallographically characterized IrCl(H)2(COE)(py)2 (2). 2 undergoes py loss to form 16-electron IrCl(H)2(COE)(py) (3), with equivalent hydride ligands. When this reaction is studied with parahydrogen, 1 efficiently achieves hyperpolarization of free py (and nicotinamide, nicotine, 5-aminopyrimidine, and 3,5-lutudine) via signal amplification by reversible exchange (SABRE) and hence reflects a simple and readily available precatayst for this process. 2 reacts further over 48 h at 298 K to form crystallographically characterized (Cl)(H)(py)(μ-Cl)(μ-H)(κ-μ-NC5H4)Ir(H)(py)2 (4). This dimer is active in the hydrogen isotope exchange process that is used in radiopharmaceutical preparations. Furthermore, while [Ir(H)2(COE)(py)3]PF6 (6) forms upon the addition of AgPF6 to 2, its stability precludes its efficient involvement in SABRE.

  9. Theoretical study of the mechanism for C-H bond activation in spin-forbidden reaction between Ti+ and C2H4

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    The mechanism of the spin-forbidden reaction Ti+(4F, 3d24s1) + C2H4 → TiC2H2+ (2A2) + H2 on both doublet and quartet potential energy surfaces has been investigated at the B3LYP level of theory. Crossing points between the potential energy surfaces and the possible spin inversion process are discussed by means of spin-orbit coupling (SOC) calculations. The strength of the SOC between the low-lying quartet state and the doublet state is 59.3 cm-1 in the intermediate complex IM1-4B2. Thus, the changes of its spin multiplicity may occur from the quartet to the doublet surface to form IM1- 2A1, leading to a sig-nificant decrease in the barrier height on the quartet PES. After the insertion intermediate IM2, two dis-tinct reaction paths on the doublet PES have been found, i.e., a stepwise path and a concerted path. The latter is found to be the lowest energy path on the doublet PES to exothermic TiC2H2+ (2A2) + H2 products, with the active barrier of 4.52 kcal/mol. In other words, this reaction proceeds in the following way: Ti++C2H4 →4IC→IM1-4B2→4,2ISC→IM1- 2A1→[2TSins]→IM2→[2TSMCTS]→IM5→TiC2H2+(2A2)+H2.

  10. Degradation of paracetamol by catalytic wet air oxidation and sequential adsorption - Catalytic wet air oxidation on activated carbons.

    Science.gov (United States)

    Quesada-Peñate, I; Julcour-Lebigue, C; Jáuregui-Haza, U J; Wilhelm, A M; Delmas, H

    2012-06-30

    The concern about the fate of pharmaceutical products has raised owing to the increasing contamination of rivers, lakes and groundwater. The aim of this paper is to evaluate two different processes for paracetamol removal. The catalytic wet air oxidation (CWAO) of paracetamol on activated carbon was investigated both as a water treatment technique using an autoclave reactor and as a regenerative treatment of the carbon after adsorption in a sequential fixed bed process. Three activated carbons (ACs) from different source materials were used as catalysts: two microporous basic ACs (S23 and C1) and a meso- and micro-porous acidic one (L27). During the first CWAO experiment the adsorption capacity and catalytic performance of fresh S23 and C1 were higher than those of fresh L27 despite its higher surface area. This situation changed after AC reuse, as finally L27 gave the best results after five CWAO cycles. Respirometry tests with activated sludge revealed that in the studied conditions the use of CWAO enhanced the aerobic biodegradability of the effluent. In the ADOX process L27 also showed better oxidation performances and regeneration efficiency. This different ageing was examined through AC physico-chemical properties.

  11. Reactivity of Tp(Me2) -supported yttrium alkyl complexes toward aromatic N-heterocycles: ring-opening or C-C bond formation directed by C-H activation.

    Science.gov (United States)

    Yi, Weiyin; Zhang, Jie; Huang, Shujian; Weng, Linhong; Zhou, Xigeng

    2014-01-13

    Unusual chemical transformations such as three-component combination and ring-opening of N-heterocycles or formation of a carbon-carbon double bond through multiple C-H activation were observed in the reactions of Tp(Me2) -supported yttrium alkyl complexes with aromatic N-heterocycles. The scorpionate-anchored yttrium dialkyl complex [Tp(Me2) Y(CH2 Ph)2 (THF)] reacted with 1-methylimidazole in 1:2 molar ratio to give a rare hexanuclear 24-membered rare-earth metallomacrocyclic compound [Tp(Me2) Y(μ-N,C-Im)(η(2) -N,C-Im)]6 (1; Im=1-methylimidazolyl) through two kinds of C-H activations at the C2- and C5-positions of the imidazole ring. However, [Tp(Me2) Y(CH2 Ph)2 (THF)] reacted with two equivalents of 1-methylbenzimidazole to afford a C-C coupling/ring-opening/C-C coupling product [Tp(Me2) Y{η(3) -(N,N,N)-N(CH3 )C6 H4 NHCHC(Ph)CN(CH3 )C6 H4 NH}] (2). Further investigations indicated that [Tp(Me2) Y(CH2 Ph)2 (THF)] reacted with benzothiazole in 1:1 or 1:2 molar ratio to produce a C-C coupling/ring-opening product {(Tp(Me2) )Y[μ-η(2) :η(1) -SC6 H4 N(CHCHPh)](THF)}2 (3). Moreover, the mixed Tp(Me2) /Cp yttrium monoalkyl complex [(Tp(Me2) )CpYCH2 Ph(THF)] reacted with two equivalents of 1-methylimidazole in THF at room temperature to afford a trinuclear yttrium complex [Tp(Me2) CpY(μ-N,C-Im)]3 (5), whereas when the above reaction was carried out at 55 °C for two days, two structurally characterized metal complexes [Tp(Me2) Y(Im-Tp(Me2) )] (7; Im-Tp(Me2) =1-methyl-imidazolyl-Tp(Me2) ) and [Cp3 Y(HIm)] (8; HIm=1-methylimidazole) were obtained in 26 and 17 % isolated yields, respectively, accompanied by some unidentified materials. The formation of 7 reveals an uncommon example of construction of a CC bond through multiple C-H activations.

  12. Solubility of cerium in LaCoO3-influence on catalytic activity.

    Science.gov (United States)

    French, S A; Catlow, C R A; Oldman, R J; Rogers, S C; Axon, S A

    2002-11-21

    The recent interest in the catalytic properties of lanthanum perovskites for methane combustion and three way catalysis has led to considerable debate as to their structure and defect chemistry. We have investigated the doping of LaCoO3 with the tetravalent cerium cation using atomistic simulation techniques. We have compared three routes for cerium insertion and identified the favoured doping mechanism, which explain experimental observations relating to the effect of cerium on catalytic activity.

  13. The preparation, characterisation and catalytic activity of tungsten bronzes

    OpenAIRE

    Stevenson, Sheena

    1987-01-01

    This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University. The structure and catalytic aspects of tungsten bronzes have been considered. A series of potassium tungsten bronzes, KxW03, 0.05 =< x =< 0.8, and the corresponding series of sodium tungsten bronzes, NaxW03, 0.05 =< x =< 0.8 were prepared by a thermal method. The thermal stability of the prepared samples was studied in the presence of both an oxidising and a reducing gas. The number and...

  14. Immunologically driven chemical engineering of antibodies for catalytic activity.

    Science.gov (United States)

    Dias, Sonia; Jovic, Florence; Renard, Pierre-Yves; Taran, Fréderic; Créminon, Christophe; Mioskowski, Charles; Grassi, Jacques

    2002-11-01

    We describe a new strategy for the preparation of catalytic antibodies based on a two-step procedure. Firstly, monoclonal antibodies are selected only if displaying the following binding features: binding both the substrate and a reactive group in such a way that the two groups are in a reactive position towards each other. Secondly, the selected monoclonal antibodies (mAbs) are chemically engineered by covalently binding the reactive group into the binding pocket of the antibody. Using previously isolated monoclonal antibodies, we have focused our studies on the control of this second step.

  15. Isolated Cu2+ ions: active sites for selective catalytic reduction of NO

    NARCIS (Netherlands)

    Korhonen, S.T.; Fickel, D.W.; Lobo, R.F.; Weckhuysen, B.M.; Beale, A.M.

    2011-01-01

    Cu chabazite catalysts show remarkable low temperature activity in selective catalytic reduction (SCR) of NO. This high activity is due to the unique character of the zeolite framework that allows only the presence of one type of isolated mononuclear Cu2+ species. These Cu2+ species are the active s

  16. Mechanistic Insights of a Selective C-H Alkylation of Alkenes by a Ru-based Catalyst and Alcohols

    KAUST Repository

    Poater, Albert

    2016-09-11

    Density functional theory calculations have been used to investigate the reaction mechanism for [(C6H6)(PCy3)(CO) RuH](+) (1; Cy, cyclohexyl) mediated alkylation of indene substrate using ethanol as solvent. According to Yi et al. [ Science 2011, 333, 1613] the plausible reaction mechanism involves a cationic Rualkenyl species, which is initially formed from 1 with two equivalents of the olefin substrate via the vinylic C-H activation and an alkane elimination step. Once the active catalytic species is achieved the oxidative addition step is faced. The latter step together with the next C-C bond formation might display the upper barrier of the catalytic cycle. Having these experimental insights at hand, we investigated in detail the whole reaction pathway using several computational DFT approaches including alternative pathways, higher in energy.

  17. High activity in catalytic cracking of large molecules over micro-mesoporous silicoaluminophosphate with controlled morphology

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    A novel micro-mesoporous silicoaluminophosphate(MUS-5) with controlled morphology has been first synthesized in a two-step route.The physical properties of the silicoaluminophosphate were characterized using XRD,SEM,TEM,nitrogen adsorption-desorption and NH3-TPD techniques.When the pH value of the solution system was varied in the range from 2.0 to 5.0,three different morphologies of silicoaluminophosphate including chain-like,flower-like and barrel-like morphology were obtained.Catalytic tests showed that the silicoaluminophosphate exhibited higher catalytic activity compared with the conventional microporous SAPO-5 under the same conditions for catalytic cracking of 1,3,5-triisopropylbenzene heavy aromatics.The remarkable catalytic reactivity was mainly attributed to the presence of the hierarchical porosity in the silicoaluminophosphate catalyst.

  18. Structural models of vanadate-dependent haloperoxidases, their reactivity, immobilization on polymer support and catalytic activities

    Indian Academy of Sciences (India)

    Mannar R Maurya

    2011-03-01

    The design of structural and functional models of enzymes vanadate-dependent haloperoxidases (VHPO) and the isolation and/or generation of species having {VO(H2O)}, {VO2}, {VO(OH)} and {VO(O2)} cores, proposed as intermediate(s) during catalytic action, in solution have been studied. Catalytic potential of these complexes have been tested for oxo-transfer as well as oxidative bromination and sulfide oxidation reactions. Some of the oxidovanadium(IV) and dioxidovanadium(V) complexes have been immobilized on polymer support in order to improve their recycle ability during catalytic activities and turn over number. The formulations of the polymer-anchored complexes are based on the respective neat complexes and conclusions drawn from the various characterization studies. These catalysts have successfully been used for all catalytic reactions mentioned above. These catalysts are stable and recyclable.

  19. Effects of copper-precursors on the catalytic activity of Cu/graphene catalysts for the selective catalytic oxidation of ammonia

    Science.gov (United States)

    Li, Jingying; Tang, Xiaolong; Yi, Honghong; Yu, Qingjun; Gao, Fengyu; Zhang, Runcao; Li, Chenlu; Chu, Chao

    2017-08-01

    Different copper-precursors were used to prepare Cu/graphene catalysts by an impregnation method. XRD, Raman spectra, TEM, BET, XPS, H2-TPR, NH3-TPD, DRIFTS and catalytic activity test were used to characterize and study the effect of precursors on the catalytic activity of Cu/graphene catalysts for NH3-SCO reaction. The large specific surface area of Cu/graphene catalysts and high dispersion of the metal particles on the graphene caused the well catalytic activity of NH3-SCO reaction. Compared to Cu/GE(AC), Cu/GE(N) showed better catalytic performance, and the complete NH3 removal efficiency was obtained at 250 °C with N2 selectivity of 85%. The copper-precursors had influence on the distribution of surface Cu species and further affected the catalytic activity of Cu/GE catalysts. The more amount of surface Cu species and highly dispersed CuO particles on the graphene surface formed by using copper nitrate as precursor could significantly improve the reducibility of catalysts and enhance NH3 adsorption, thereby improving the catalytic activity of Cu/graphene catalyst.

  20. Direct bis-arylation of cyclobutanecarboxamide via double C-H activation: an auxiliary-aided diastereoselective Pd-catalyzed access to trisubstituted cyclobutane scaffolds having three contiguous stereocenters and an all-cis stereochemistry.

    Science.gov (United States)

    Parella, Ramarao; Gopalakrishnan, Bojan; Babu, Srinivasarao Arulananda

    2013-12-06

    An auxiliary-aided Pd-catalyzed highly diastereoselective double C-H activation and direct bis-arylation of methylene C(sp(3))-H bonds of cyclobutanecarboxamides and the syntheses of several novel trisubstituted cyclobutanecarboxamide scaffolds having an all-cis stereochemistry are reported. Extensive screening of various auxiliaries and reaction conditions was performed to firmly establish the optimized reaction conditions required for effecting the mono- or double C-H arylation of cyclobutanecarboxamides. The auxiliary-attached cyclobutanecarboxamides 15a, 15g, and 15h, prepared from the auxiliaries such as, 8-aminoquinoline, 2-(methylthio)aniline, and N',N'-dimethylethane-1,2-diamine were found to undergo an efficient direct bis-arylation. The Pd-catalyzed arylation reaction of N-(quinolin-8-yl)cyclobutanecarboxamide 15a with one equivalent or more of aryl iodides, afforded the corresponding bis-arylated cyclobutanecarboxamides 16a-y. Nevertheless, the Pd-catalyzed arylation of 15a with just 0.5 equiv of the aryl iodides 13a, 13b, 13e, and 13m, selectively gave the corresponding monoarylated cyclobutanecarboxamides 17a-17d. The Pd-catalyzed arylation of 15g or 15h with one equivalent or more of aryl iodides afforded the bis-arylated cyclobutanecarboxamides 19a-19c and 21a-21m, respectively. However, the Pd-catalyzed arylations of compounds 15g or 15h with just 0.5 equiv of aryl iodides were ineffective. The stereochemistry of compounds obtained in this work was unambiguously assigned from the X-ray structures of representative products.

  1. Catalytic activity of cerium-doped Ru/Al2O3 during ozonation of dimethyl phthalate

    Institute of Scientific and Technical Information of China (English)

    Yunrui ZHOU; Wanpeng ZHU; Xun CHEN

    2008-01-01

    In this paper, factors influencing the mineraliza-tion of dimethyl phthalate (DMP) during catalytic ozona-tion with a cerium-doped Ru/Al2O3 catalyst were studied. The catalytic contribution was calculated through the results of a companrison experiment. It showed that doping cerium significantly enhanced catalytic activity. The total organic carbon (TOC) removal over the doped catalyst at 100 rain reached 75.1%, 61.3% using Ru/Al2O3 catalyst and only 14.0% using ozone alone. Catalytic activity reached the maximum when 0.2% of ruthenium and 1.0% of cerium'were simultaneously loaded onto Al2O3 support. Results of experiments on oxidation by ozone alone, adsorption of the catalyst, Ce ion's and heterogeneous catalytic ozonation confirmed that the contribution of het-erogeneous catalytic ozonation was about 50%, which showed the obvious effect of Ru-Ce/Al2O3 on catalytic activity.

  2. Study on the correlation between the surface active species of Pd/cordierite monolithic catalyst and its catalytic activity

    Energy Technology Data Exchange (ETDEWEB)

    Liao, Hengcheng, E-mail: hengchengliao@seu.edu.cn; Zuo, Peiyuan; Liu, Miaomiao

    2016-09-15

    Two Pd-loading routes and three Pd-precursor matters were adopted to prepare Pd/(Ce,Y)O{sub 2}/γ-Al{sub 2}O{sub 3}/cordierite monolithic catalyst. The surface active species on the catalyst were characterized by XPS, and its catalytic activity for methane combustion was tested, and the dynamics of the catalytic combustion reaction was also discussed. Pd-loading route and Pd-precursor mass have a significant influence on the catalytic activity and surface active species. The sol dipping method is more advanced than the aqueous solution impregnating method. PN-sol catalyst, by sol dipping combined with Pd(NO{sub 3}){sub 2}-precursor, has the best catalytic activity. The physical reason is the unique active Pd phase coexisting with active PdO phase on the surface, and thus the Pd3d{sub 5/2} binding energy of surface species and apparent activation energy of combustion reaction are considerably decreased. The catalytic activity index, Pd3d{sub 5/2} binding energy and apparent activation energy are highly tied each other with exponential relations.

  3. Removal performance and mechanism of ibuprofen from water by catalytic ozonation using sludge-corncob activated carbon as catalyst.

    Science.gov (United States)

    Wang, Hongjuan; Zhang, Liqiu; Qi, Fei; Wang, Xue; Li, Lu; Feng, Li

    2014-09-01

    To discover the catalytic activity of sludge-corncob activated carbon in catalytic ozonation of Ibuprofen, the performance of sludge-corncob activated carbon and three selected commercial activated carbons as catalysts in catalytic ozonation was investigated. The observation indicates the degradation rate of Ibuprofen increases significantly in the presence of sludge-corncob activated carbon and the catalytic activity of sludge-corncob activated carbon is much higher than that of the other three commercial activated carbons. Ibuprofen's removal rate follows pseudo-first order kinetics model well. It is also found that the adsorption removal of Ibuprofen by sludge-corncob activated carbon is less than 30% after 40 min. And the removal efficiency of Ibuprofen in the hybrid ozone/sludge-corncob activated carbon system is higher than the sum of sludge-corncob activated carbon adsorption and ozonation alone, which is a supportive evidence for catalytic reaction. In addition, the results of radical scavenger experiments demonstrate that catalytic ozonation of Ibuprofen by sludge-corncob activated carbon follows a hydroxyl radical reaction pathway. During ozonation of Ibuprofen in the presence of activated carbon, ozone could be catalytically decomposed to form hydrogen peroxide, which can promote the formation of hydroxyl radical. The maximum amount of hydrogen peroxide occurs in the presence of sludge-corncob activated carbon, which can explain why sludge-corncob activated carbon has the best catalytic activity among four different activated carbons.

  4. The selective activation of a C-F bond with an auxiliary strong Lewis acid: a method to change the activation preference of C-F and C-H bonds.

    Science.gov (United States)

    Wang, Lin; Sun, Hongjian; Li, Xiaoyan; Fuhr, Olaf; Fenske, Dieter

    2016-11-15

    The selective activation of the C-F bonds in substituted (2,6-difluorophenyl)phenylimines (2,6-F2H3C6-(C[double bond, length as m-dash]NH)-n'-R-C6H4 (n' = 2, R = H (1); n' = 2, R = Me (2); n' = 4, R = tBu (3))) by Fe(PMe3)4 with an auxiliary strong Lewis acid (LiBr, LiI, or ZnCl2) was explored. As a result, iron(ii) halides ((H5C6-(C[double bond, length as m-dash]NH)-2-FH3C6)FeX(PMe3)3 (X = Br (8); Cl (9)) and (n-RH4C6-(C[double bond, length as m-dash]NH)-2'-FH3C6)FeX(PMe3)3 (n = 2, R = Me, X = Br (11); n = 4, R = tBu, X = I (12))) were obtained. Under similar reaction conditions, using LiBF4 instead of LiBr or ZnCl2, the reaction of (2,6-difluorophenyl)phenylimine with Fe(PMe3)4 afforded an ionic complex [(2,6-F2H3C6-(C[double bond, length as m-dash]NH)-H4C6)Fe(PMe3)4](BF4) (10) via the activation of a C-H bond. The method of C-F bond activation with an auxiliary strong Lewis acid is appropriate for monofluoroarylmethanimines. Without the Lewis acid, iron(ii) hydrides ((2-RH4C6-(C[double bond, length as m-dash]NH)-2'-FH3C6)FeH(PMe3)3 (R = H (13); Me (14))) were generated from the reactions of Fe(PMe3)4 with the monofluoroarylmethanimines (2-FH4C6-(C[double bond, length as m-dash]NH)-2'-RC6H4 (R = H (4); Me (5))); however, in the presence of ZnCl2 or LiBr, iron(ii) halides ((2-RH4C6-(C[double bond, length as m-dash]NH)-H4C6)FeX(PMe3)3 (R = H, X = Cl (15); R = Me, X = Br (16))) could be obtained through the activation of a C-F bond. Furthermore, a C-F bond activation with good regioselectivity in (pentafluorophenyl)arylmethanimines (F5C6-(C[double bond, length as m-dash]NH)-2,6-Y2C6H3 (Y = F (6); H (7))) could be realized in the presence of ZnCl2 to produce iron(ii) chlorides ((2,6-Y2H3C6-(C[double bond, length as m-dash]NH)-F4C6)FeCl(PMe3)3 (Y = F (17); H (18))). This series of iron(ii) halides could be used to catalyze the hydrosilylation reaction of aldehydes. Due to the stability of iron(ii) halides to high temperature, the reaction mixture was allowed to be

  5. Catalytic activation of carbohydrates as formaldehyde equivalents for Stetter reaction with enones.

    Science.gov (United States)

    Zhang, Junmin; Xing, Chong; Tiwari, Bhoopendra; Chi, Yonggui Robin

    2013-06-05

    We disclose the first catalytic activation of carbohydrates as formaldehyde equivalents to generate acyl anions as one-carbon nucleophilic units for a Stetter reaction. The activation involves N-heterocyclic carbene (NHC)-catalyzed C-C bond cleavage of carbohydrates via a retro-benzoin-type process to generate the acyl anion intermediates. This Stetter reaction constitutes the first success in generating formal formaldehyde-derived acyl anions as one-carbon nucleophiles for non-self-benzoin processes. The renewable nature of carbohydrates, accessible from biomass, further highlights the practical potential of this fundamentally interesting catalytic activation.

  6. Catalytic activity of titania zirconia mixed oxide catalyst for dimerization eugenol

    Science.gov (United States)

    Tursiloadi, S.; Kristiani, A.; Jenie, S. N. Aisyiyah; Laksmono, J. A.

    2017-01-01

    Clove oil has been found to possess antibacterial, antifungal, antiviral, antitumor, antioxidant and insecticidal properties. The major compound of clove oil is eugenol about 49-87%. Eugenol as phenolic compounds exhibits antioxidant and antimicrobial activities. The derivative compound of eugenol, dieugenol, show antioxidant potency better than parent eugenol. A series of TiO2-ZrO2 mixed oxides (TZ) with various titanium contents from 0 to 100wt%, prepared by using sol gel method were tested their catalytic activity for dimerization eugenol, Their catalytic activity show that these catalysts resulted a low yield of dimer eugenol, dieugenol, about 2-9 % and the purity is more than 50%.

  7. Hydrolytic enzymes conjugated to quantum dots mostly retain whole catalytic activity.

    Science.gov (United States)

    Iyer, Aditya; Chandra, Anil; Swaminathan, Rajaram

    2014-09-01

    Tagging a luminescent quantum dot (QD) with a biological like enzyme (Enz) creates value-added entities like quantum dot-enzyme bioconjugates (QDEnzBio) that find utility as sensors to detect glucose or beacons to track enzymes in vivo. For such applications, it is imperative that the enzyme remains catalytically active while the quantum dot is luminescent in the bioconjugate. A critical feature that dictates this is the quantum dot-enzyme linkage chemistry. Previously such linkages have put constraints on polypeptide chain dynamics or hindered substrate diffusion to active site, seriously undermining enzyme catalytic activity. In this work we address this issue using avidin-biotin linkage chemistry together with a flexible spacer to conjugate enzyme to quantum dot. The catalytic activity of three biotinylated hydrolytic enzymes, namely, hen egg white lysozyme (HEWL), alkaline phosphatase (ALP) and acetylcholinesterase (AChE) was investigated post-conjugation to streptavidin linked quantum dot for multiple substrate concentrations and varying degrees of biotinylation. We demonstrate that all enzymes retain full catalytic activity in the quantum dot-enzyme bioconjugates in comparison to biotinylated enzyme alone. However, unlike alkaline phosphatase and acetylcholinesterase, the catalytic activity of hen egg white lysozyme was observed to be increasingly susceptible to ionic strength of medium with rising level of biotinylation. This susceptibility was attributed to arise from depletion of positive charge from lysine amino groups after biotinylation. We reasoned that avidin-biotin linkage in the presence of a flexible seven atom spacer between biotin and enzyme poses no constraints to enzyme structure/dynamics enabling retention of full enzyme activity. Overall our results demonstrate for the first time that streptavidin-biotin chemistry can yield quantum dot enzyme bioconjugates that retain full catalytic activity as native enzyme. Copyright © 2014 Elsevier B

  8. [Catalytic ozonation of nitrobenzene in water by acidification-activated red mud].

    Science.gov (United States)

    Kang, Ya-ning; Li, Hua-nan; Xu, Bing-bing; Qi, Fei; Zhao, Lun

    2013-05-01

    Red mud as one kind of aluminum industrial wastes was used as raw material for catalyst preparation. It was activated by acidification in order to enhance its catalytic activity in the system of catalytic ozonation. Furthermore, removal performance and reaction mechanism in degradation of organic pollutants were discussed. Results showed that acid modified red mud had more significant catalytic activity than the raw red mud. The removal efficiency of nitrobenzene by catalytic ozonation with acidified red mud (RM6.0) increased with the increasing ozone concentration. When the ozone concentration was increased from 0.4 mg x L(-1) to 1.7 mg x L(-1), the removal efficiency of nitrobenzene increased from 45% to 92%. There was a consistent effect of water pH on the removal efficiency and the ozone concentration variation. The variation of the removal efficiency depended on the initial water pH. This was because the concentration of OH(-) led to ozone decomposition to generate hydroxyl radicals. The higher water pH value led to the quenching of hydroxyl radicals, resulting in the reduction of catalytic activity of RM6.0. The experimental results of aqueous ozone concentration variation in the presence of RM6.0 and inhibition by hydroxyl radicals indicated that the main reaction mechanism was catalytic ozonation of NB. Firstly, aqueous ozone was absorbed onto the surface of RM6.0, and then the concentrated ozone oxidized NB in water which was with a combination of direct and indirect oxidation. In catalytic reaction, hydroxyl radicals were present, which were generated during the oxidation of NB on the surface of RM6.0.

  9. Formation and High Reactivity of the anti-Dioxo Form of High-Spin μ-Oxodioxodiiron(IV) as the Active Species That Cleaves Strong C-H Bonds.

    Science.gov (United States)

    Kodera, Masahito; Ishiga, Shin; Tsuji, Tomokazu; Sakurai, Katsutoshi; Hitomi, Yutaka; Shiota, Yoshihito; Sajith, P K; Yoshizawa, Kazunari; Mieda, Kaoru; Ogura, Takashi

    2016-04-18

    Recently, it was shown that μ-oxo-μ-peroxodiiron(III) is converted to high-spin μ-oxodioxodiiron(IV) through O-O bond scission. Herein, the formation and high reactivity of the anti-dioxo form of high-spin μ-oxodioxodiiron(IV) as the active oxidant are demonstrated on the basis of resonance Raman and electronic-absorption spectral changes, detailed kinetic studies, DFT calculations, activation parameters, kinetic isotope effects (KIE), and catalytic oxidation of alkanes. Decay of μ-oxodioxodiiron(IV) was greatly accelerated on addition of substrate. The reactivity order of substrates is toluenecumenereaction with toluene/[D8 ]toluene is 95 at -30 °C, which the largest in diiron systems reported so far. The present diiron complex efficiently catalyzes the oxidation of various alkanes with H2 O2 .

  10. Effect of BaO on Catalytic Activity of Pt-Rh TWC

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The effects of BaO doping on the three-way catalytic activity of Pt-Rh catalyst and on water-gas shift were investigated. The results show that the light-off temperatures of hydrocarbon and carbon monoxide and nitrogen oxides of the fresh catalysts slightly differ from those of the aged catalysts, and the catalysts containing CeO2-ZrO2-BaO have lower lightoff temperature and better catalytic activity than these containing BaO and CeO2-ZrO2 after hydrothermal aging for 5 h at 1000 C. The catalysts were characterized by means of the temperature-programmed reduction (TPR) in hydrogen and the temperature-programmed desorption (TPD) in oxygen. It is confirmed that the suggested route of CeO2-ZrO2-BaO by coprecipitation can improve the catalytic activity of catalysts.

  11. The effect of Ce ion substituted OMS-2 nanostructure in catalytic activity for benzene oxidation

    Science.gov (United States)

    Hou, Jingtao; Li, Yuanzhi; Mao, Mingyang; Zhao, Xiujian; Yue, Yuanzheng

    2014-11-01

    The nanostructure of Ce doped OMS-2 plays a very important role in its catalytic property. We demonstrate by density functional theory (DFT) calculations that the unique nanostructure of the Ce ion substituted OMS-2 with Mn vacancy in the framework is beneficial for the improvement of catalytic activity, while the nanostructure of the Ce ion substituted OMS-2 without defects are detrimental to the catalytic activity. We establish a novel and facile strategy of synthesizing these unique Ce ion substituted OMS-2 nanostructure with Mn vacancies in the framework by hydrothermal redox reaction between Ce(NO3)3 and KMnO4 with KMnO4/Ce(NO3)3 at a molar ratio of 3 : 1 at 120 °C. Compared to pure OMS-2, the produced catalyst of Ce ion substituted OMS-2 ultrathin nanorods exhibits an enormous enhancement in the catalytic activity for benzene oxidation, which is evidenced by a significant decrease (ΔT50 = 100 °C, ΔT90 = 129 °C) in the reaction temperature of T50 and T90 (corresponding to the benzene conversion = 50% and 90%), which is considerably more efficient than the expensive supported noble metal catalyst (Pt/Al2O3). We combine both theoretical and experimental evidence to provide a new physical insight into the significant effect due to the defects induced by the Ce ion substitution on the catalytic activity of OMS-2. The formation of unique Ce ion substituted OMS-2 nanostructure with Mn vacancies in the framework leads to a significant enhancement of the lattice oxygen activity, thus tremendously increasing the catalytic activity.The nanostructure of Ce doped OMS-2 plays a very important role in its catalytic property. We demonstrate by density functional theory (DFT) calculations that the unique nanostructure of the Ce ion substituted OMS-2 with Mn vacancy in the framework is beneficial for the improvement of catalytic activity, while the nanostructure of the Ce ion substituted OMS-2 without defects are detrimental to the catalytic activity. We establish a novel

  12. Selective activation of C-F and C-H bonds with iron complexes, the relevant mechanism study by DFT calculations and study on the chemical properties of hydrido iron complex.

    Science.gov (United States)

    Xu, Xiaofeng; Jia, Jiong; Sun, Hongjian; Liu, Yuxia; Xu, Wengang; Shi, Yujie; Zhang, Dongju; Li, Xiaoyan

    2013-03-14

    The reactions of (2,6-difluorophenyl)phenylmethanone (2,6-F(2)C(6)H(3)-C(=O)-C(6)H(5)) (1) and (2,6-difluorophenyl)phenylmethanimine (2,6-F(2)C(6)H(3)-C(=NH)-C(6)H(5)) (3) with Fe(PMe(3))(4) afforded different selective C-F/C-H bond activation products. The reaction of 1 with Fe(PMe(3))(4) gave rise to bis-chelate iron(II) complex [C(6)H(5)-C(=O)-3-FC(6)H(3))Fe(PMe(3))](2) (2) via C-F bond activation. The reaction of 3 with Fe(PMe(3))(4) delivered chelate hydrido iron(II) complex 2,6-F(2)C(6)H(3)-C(=NH)-C(6)H(4))Fe(H)(PMe(3))(3) (4) through C-H bond activation. The DFT calculations show the detailed elementary steps of the mechanism of formation of hydrido complex 4 and indicate 4 is the kinetically preferred product. Complex 4 reacted with HCl, CH(3)Br and CH(3)I delivered the chelate iron halides (2,6-F(2)C(6)H(3)-C(=NH)-C(6)H(4))Fe(PMe(3))(3)X (X = Cl (5); Br (6); I (7)). A ligand (PMe(3)) replacement by CO of 4 was observed giving (2,6-F(2)C(6)H(3)-C(=NH)-C(6)H(4))Fe(H)(CO)(PMe(3))(2) (8). The chelate ligand exchange occurred through the reaction of 4 with salicylaldehydes. The reaction of 4 with Me(3)SiC[triple bond, length as m-dash]CH afforded (2,6-F(2)C(6)H(3)-C([double bond, length as m-dash]N)-C(6)H(5))Fe(C≡C-SiMe(3))(PMe(3))(3) (11). A reaction mechanism from 4 to 11 was discussed with the support of IR monitoring. The molecular structures of complexes 2, 4, 6, 7, 10 and 11 were determined by X-ray diffraction.

  13. The effect of Ce ion substituted OMS-2 nanostructure in catalytic activity for benzene oxidation.

    Science.gov (United States)

    Hou, Jingtao; Li, Yuanzhi; Mao, Mingyang; Zhao, Xiujian; Yue, Yuanzheng

    2014-12-21

    The nanostructure of Ce doped OMS-2 plays a very important role in its catalytic property. We demonstrate by density functional theory (DFT) calculations that the unique nanostructure of the Ce ion substituted OMS-2 with Mn vacancy in the framework is beneficial for the improvement of catalytic activity, while the nanostructure of the Ce ion substituted OMS-2 without defects are detrimental to the catalytic activity. We establish a novel and facile strategy of synthesizing these unique Ce ion substituted OMS-2 nanostructure with Mn vacancies in the framework by hydrothermal redox reaction between Ce(NO3)3 and KMnO4 with KMnO4/Ce(NO3)3 at a molar ratio of 3 : 1 at 120 °C. Compared to pure OMS-2, the produced catalyst of Ce ion substituted OMS-2 ultrathin nanorods exhibits an enormous enhancement in the catalytic activity for benzene oxidation, which is evidenced by a significant decrease (ΔT(50) = 100 °C, ΔT(90) = 129 °C) in the reaction temperature of T50 and T90 (corresponding to the benzene conversion = 50% and 90%), which is considerably more efficient than the expensive supported noble metal catalyst (Pt/Al2O3). We combine both theoretical and experimental evidence to provide a new physical insight into the significant effect due to the defects induced by the Ce ion substitution on the catalytic activity of OMS-2. The formation of unique Ce ion substituted OMS-2 nanostructure with Mn vacancies in the framework leads to a significant enhancement of the lattice oxygen activity, thus tremendously increasing the catalytic activity.

  14. Catalytic activity of metallic nanoisland coatings. The influence of size effects on the recombination properties

    Science.gov (United States)

    Tomilina, O. A.; Berzhansky, V. N.; Tomilin, S. V.; Shaposhnikov, A. N.

    2016-08-01

    The results of investigations of the quantum-size effects influence on selective properties of heterogeneous nanocatalysts are presents. As etalon exothermic reaction was used the reaction of atomic hydrogen recombination. The nanostructured Pd and Pt films on Teflon substrate were used as a samples of heterogeneous nanocatalysts. It was shown that for nanoparticles with various sizes the catalytic activity has the periodic dependence. It has been found that for certain sizes of nanoparticles their catalytic activity is less than that of Teflon substrate.

  15. A Model of Irregular Impurity at the Surface of Nanoparticle and Catalytic Activity

    Institute of Scientific and Technical Information of China (English)

    I.V.Blinova; V.V.Gusarov; I.Yu.Popov

    2012-01-01

    A problem of nanocatalyst improvement is considered. The existence of irregularities at the surface of nanoparticle leads to the increasing of the surface/volume ratio and, correspondingly, to the improvement of the catalytic activity. But this impurity gives one an additional effect due to the change of the electronic density at the surface. We suggest simple model for the description of this effect. The model allows one to find the discrete spectrum of the Schrdinger operator for nanoparticle. Due to this impurity induced bound states the electron density increases near the surface. It leads to the increase of the catalytic activity of nanoparticles with surface impurities.

  16. Influence of Al content on textural properties and catalytic activity of hierarchical porous aluminosilicate materials

    Indian Academy of Sciences (India)

    Ling Xu; Limei Duan; Zongrui Liu; Jingqi Guan; Qiubin Kan

    2013-12-01

    A series of hierarchical porous aluminosilicate materials were prepared using hydrothermal treatment of the composite formed by polystyrene colloidal spheres and aluminosilicate gel. Influence of Al content on the textural properties, acidic properties and catalytic activity of the hierarchical porous aluminosilicate materials was studied. The results showed that textural and acidic properties of the hierarchical porous aluminosilicate materials were strongly related to Al content. As Al content is increased (Si/Al = 25), the hierarchical porous catalysts exhibited higher catalytic activity and major product selectivity for alkylation of phenol with tert-butanol than the catalysts with a lower Al content (Si/Al = 50).

  17. The Impact of Enzyme Orientation and Electrode Topology on the Catalytic Activity of Adsorbed Redox Enzymes

    Science.gov (United States)

    McMillan, Duncan G. G.; Marritt, Sophie J.; Kemp, Gemma L.; Gordon-Brown, Piers; Butt, Julea N.; Jeuken, Lars J. C.

    2014-01-01

    It is well established that the structural details of electrodes and their interaction with adsorbed enzyme influences the interfacial electron transfer rate. However, for nanostructured electrodes, it is likely that the structure also impacts on substrate flux near the adsorbed enzymes and thus catalytic activity. Furthermore, for enzymes converting macro-molecular substrates it is possible that the enzyme orientation determines the nature of interactions between the adsorbed enzyme and substrate and therefore catalytic rates. In essence the electrode may impede substrate access to the active site of the enzyme. We have tested these possibilities through studies of the catalytic performance of two enzymes adsorbed on topologically distinct electrode materials. Escherichia coli NrfA, a nitrite reductase, was adsorbed on mesoporous, nanocrystalline SnO2 electrodes. CymA from Shewanella oneidensis MR-1 reduces menaquinone-7 within 200 nm sized liposomes and this reaction was studied with the enzyme adsorbed on SAM modified ultra-flat gold electrodes. PMID:24634538

  18. The Impact of Enzyme Orientation and Electrode Topology on the Catalytic Activity of Adsorbed Redox Enzymes.

    Science.gov (United States)

    McMillan, Duncan G G; Marritt, Sophie J; Kemp, Gemma L; Gordon-Brown, Piers; Butt, Julea N; Jeuken, Lars J C

    2013-11-01

    It is well established that the structural details of electrodes and their interaction with adsorbed enzyme influences the interfacial electron transfer rate. However, for nanostructured electrodes, it is likely that the structure also impacts on substrate flux near the adsorbed enzymes and thus catalytic activity. Furthermore, for enzymes converting macro-molecular substrates it is possible that the enzyme orientation determines the nature of interactions between the adsorbed enzyme and substrate and therefore catalytic rates. In essence the electrode may impede substrate access to the active site of the enzyme. We have tested these possibilities through studies of the catalytic performance of two enzymes adsorbed on topologically distinct electrode materials. Escherichia coli NrfA, a nitrite reductase, was adsorbed on mesoporous, nanocrystalline SnO2 electrodes. CymA from Shewanella oneidensis MR-1 reduces menaquinone-7 within 200 nm sized liposomes and this reaction was studied with the enzyme adsorbed on SAM modified ultra-flat gold electrodes.

  19. CuO impregnated activated carbon for catalytic wet peroxide oxidation of phenol.

    Science.gov (United States)

    Liou, Rey-May; Chen, Shih-Hsiung

    2009-12-15

    This paper presents an original approach to the removal of phenol in synthetic wastewater by catalytic wet peroxide oxidation with copper binding activated carbon (CuAC) catalysts. The characteristics and oxidation performance of CuAC in the wet hydrogen peroxide catalytic oxidation of phenol were studied in a batch reactor at 80 degrees C. Complete conversion of the oxidant, hydrogen peroxide, was observed with CuAC catalyst in 20 min oxidation, and a highly efficient phenol removal and chemical oxygen demand (COD) abatement were achieved in the first 30 min. The good oxidation performance of CuAC catalyst was contributed to the activity enhancement of copper oxide, which was binding in the carbon matrix. It can be concluded that the efficiency of oxidation dominated by the residual H2O2 in this study. An over 90% COD removal was achieved by using the multiple-step addition in this catalytic oxidation.

  20. Catalytic decomposition of low level ozone with gold nanoparticles supported on activated carbon

    Institute of Scientific and Technical Information of China (English)

    Pengyi ZHANG; Bo ZHANG; Rui SHI

    2009-01-01

    Highly dispersed gold nanoparticles were supported on coal-based activated carbon (AC) by a sol immobilization method and were used to investigate their catalytic activity for low-level ozone decomposition at ambient temperature. Nitrogen adsorption-desorption,scanning electron microscope (SEM), and X-ray photo-electron spectroscopy (XPS) were used to characterize the catalysts before and after ozone decomposition. The results showed that the supported gold nanoparticles prepared with microwave heating were much smaller and more uniformly dispersed on the activated carbon than those prepared with traditional conduction heating, exhibiting higher catalytic activity for ozone decomposition. The pH values of gold precursor solution significantly influenced the catalytic activity of supported gold for ozone decomposition, and the best pH value was 8. In the case of space velocity of 120000 h-1, inlet ozone concentration of 50mg/m3, and relative humidity of 45%, the Au/AC catalyst maintained the ozone removal ratio at 90.7% after 2500 min. After being used for ozone decomposition, the surface carbon of the catalyst was partly oxidized and the oxygen content increased accordingly, while its specific surface area and pore volume only decreased a little.Ozone was mainly catalytically decomposed by the gold nanoparticles supported on the activated carbon.

  1. Study on the Carbon-Methanation and Catalytic Activity of Ru/AC for Ammonia Synthesis

    Institute of Scientific and Technical Information of China (English)

    祝一锋; 李小年; 季德春; 刘化章

    2004-01-01

    The effects of promoters K, Ba, Sm on the resistance to carbon-methanation and catalytic activity of ruthenium supported on active carbon (Ru/AC) for ammonia synthesis have been studied by means of TG-DTG (thermalgravity-differential thermalgravity), temperature-programmed desorption, and activity test. Promoters Ba,K, and Sm increased the activity of Ru/AC catalysts for ammonia synthesis significantly. Much higher activity can be reached for Ru/AC catalyst with bi- or tri-promoters. Indeed, the triply promoted catalyst showed the highest activity, coupled to a surprisingly high resistance to methanation. The ability of resistance of promoter to methanation of Ru/AC catalyst is dependent on the adsorption intensity of hydrogen. The strong adsorption of hydrogen would enhance methanation and impact the adsorption of nitrogen, which results in the decrease of catalytic activity.

  2. Rh(V) -Nitrenoid as a Key Intermediate in Rh(III) -Catalyzed Heterocyclization by C-H Activation: A Computational Perspective on the Cycloaddition of Benzamide and Diazo Compounds.

    Science.gov (United States)

    Zhou, Tao; Guo, Wei; Xia, Yuanzhi

    2015-06-15

    A mechanistic study of the substituent-dependent ring formations in Rh(III) -catalyzed C-H activation/cycloaddition of benzamide and diazo compounds was carried out by using DFT calculations. The results indicated that the decomposition of the diazo is facilitated upon the formation of the five-membered rhodacycle, in which the Rh(III) center is more electrophilic. The insertion of carbenoid into Rh-C(phenyl) bond occurs readily and forms a 6-membered rhodacycle, however, the following C-N bond formation is difficult both kinetically and thermodynamically by reductive elimination from the Rh(III) species. Instead, the Rh(V) -nitrenoid intermediate could be formed by migration of the pivalate from N to Rh, which undergoes the heterocyclization much more easily and complementary ring-formations could be modulated by the nature of the substituent at the α-carbon. When a vinyl is attached, the stepwise 1,3-allylic migration occurs prior to the pivalate migration and the 8-membered ring product will be formed. On the other hand, the pivalate migration becomes more favorable for the phenyl-contained intermediate because of the difficult 1,3-allylic migration accompanied by dearomatization, thus the 5-membered ring product was formed selectively. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Selective sp3 C-H alkylation via polarity-match-based cross-coupling

    Science.gov (United States)

    Le, Chip; Liang, Yufan; Evans, Ryan W.; Li, Ximing; MacMillan, David W. C.

    2017-07-01

    The functionalization of carbon-hydrogen (C-H) bonds is one of the most attractive strategies for molecular construction in organic chemistry. The hydrogen atom is considered to be an ideal coupling handle, owing to its relative abundance in organic molecules and its availability for functionalization at almost any stage in a synthetic sequence. Although many C-H functionalization reactions involve C(sp3)-C(sp2) coupling, there is a growing demand for C-H alkylation reactions, wherein sp3 C-H bonds are replaced with sp3 C-alkyl groups. Here we describe a polarity-match-based selective sp3 C-H alkylation via the combination of photoredox, nickel and hydrogen-atom transfer catalysis. This methodology simultaneously uses three catalytic cycles to achieve hydridic C-H bond abstraction (enabled by polarity matching), alkyl halide oxidative addition, and reductive elimination to enable alkyl-alkyl fragment coupling. The sp3 C-H alkylation is highly selective for the α-C-H of amines, ethers and sulphides, which are commonly found in pharmaceutically relevant architectures. This cross-coupling protocol should enable broad synthetic applications in de novo synthesis and late-stage functionalization chemistry.

  4. Tailoring nanoscopic confines to maximize catalytic activity of hydronium ions

    Science.gov (United States)

    Shi, Hui; Eckstein, Sebastian; Vjunov, Aleksei; Camaioni, Donald M.; Lercher, Johannes A.

    2017-05-01

    Acid catalysis by hydronium ions is ubiquitous in aqueous-phase organic reactions. Here we show that hydronium ion catalysis, exemplified by intramolecular dehydration of cyclohexanol, is markedly influenced by steric constraints, yielding turnover rates that increase by up to two orders of magnitude in tight confines relative to an aqueous solution of a Brønsted acid. The higher activities in zeolites BEA and FAU than in water are caused by more positive activation entropies that more than offset higher activation enthalpies. The higher activity in zeolite MFI with pores smaller than BEA and FAU is caused by a lower activation enthalpy in the tighter confines that more than offsets a less positive activation entropy. Molecularly sized pores significantly enhance the association between hydronium ions and alcohols in a steric environment resembling the constraints in pockets of enzymes stabilizing active sites.

  5. Activity prediction of substrates in NADH-dependent carbonyl reductase by docking requires catalytic constraints and charge parameterization of catalytic zinc environment.

    Science.gov (United States)

    Dhoke, Gaurao V; Loderer, Christoph; Davari, Mehdi D; Ansorge-Schumacher, Marion; Schwaneberg, Ulrich; Bocola, Marco

    2015-11-01

    Molecular docking of substrates is more challenging compared to inhibitors as the reaction mechanism has to be considered. This becomes more pronounced for zinc-dependent enzymes since the coordination state of the catalytic zinc ion is of greater importance. In order to develop a predictive substrate docking protocol, we have performed molecular docking studies of diketone substrates using the catalytic state of carbonyl reductase 2 from Candida parapsilosis (CPCR2). Different docking protocols using two docking methods (AutoDock Vina and AutoDock4.2) with two different sets of atomic charges (AM1-BCC and HF-RESP) for catalytic zinc environment and substrates as well as two sets of vdW parameters for zinc ion were examined. We have selected the catalytic binding pose of each substrate by applying mechanism based distance criteria. To compare the performance of the docking protocols, the correlation plots for the binding energies of these catalytic poses were obtained against experimental Vmax values of the 11 diketone substrates for CPCR2. The best correlation of 0.73 was achieved with AutoDock4.2 while treating catalytic zinc ion in optimized non-bonded (NBopt) state with +1.01 charge on the zinc ion, compared to 0.36 in non-bonded (+2.00 charge on the zinc ion) state. These results indicate the importance of catalytic constraints and charge parameterization of catalytic zinc environment for the prediction of substrate activity in zinc-dependent enzymes by molecular docking. The developed predictive docking protocol described here is in principle generally applicable for the efficient in silico substrate spectra characterization of zinc-dependent ADH.

  6. Studies relevant to the catalytic activation of carbon monoxide

    Energy Technology Data Exchange (ETDEWEB)

    Ford, P.C.

    1992-06-04

    Research activity during the 1991--1992 funding period has been concerned with the following topics relevant to carbon monoxide activation. (1) Exploratory studies of water gas shift catalysts heterogenized on polystyrene based polymers. (2) Mechanistic investigation of the nucleophilic activation of CO in metal carbonyl clusters. (3) Application of fast reaction techniques to prepare and to investigate reactive organometallic intermediates relevant to the activation of hydrocarbons toward carbonylation and to the formation of carbon-carbon bonds via the migratory insertion of CO into metal alkyl bonds.

  7. Improved acylation of phytosterols catalyzed by Candida antarctica lipase A with superior catalytic activity

    DEFF Research Database (Denmark)

    Panpipat, Worawan; Xu, Xuebing; Guo, Zheng

    2013-01-01

    This work reported a novel approach to synthesize phytosterol (ˇ-sitosterol as a model) fatty acid esters by employing Candida antarctica lipase A (CAL A) which shows a superior catalytic activity to other lipases. A series of ˇ-sitosteryl fatty acid esters (C2–C18) have been successfully prepared...

  8. HIGH-THROUGHPUT IDENTIFICATION OF CATALYTIC REDOX-ACTIVE CYSTEINE RESIDUES

    Science.gov (United States)

    Cysteine (Cys) residues often play critical roles in proteins; however, identification of their specific functions has been limited to case-by-case experimental approaches. We developed a procedure for high-throughput identification of catalytic redox-active Cys in proteins by se...

  9. CATALYTIC ACTIVITIES OF RARE-EARTH CALIXARENE COMPLEXES IN POLYMER SYNTHESES

    Institute of Scientific and Technical Information of China (English)

    Zhi-quan Shen

    2005-01-01

    The studies of our group on the catalytic activities of rare earth calixarene complexes in polymer syntheses are reviewed. Rare earth calixarene complexes are effect catalysts for the polymerizations of butadiene, isoprene, ethylene,styrene, propylene oxide, styrene oxide, trimethylene carbonate and 2,2-dimethyl-trimethylene carbonate.

  10. Aligned carbon nanotube with electro-catalytic activity for oxygen reduction reaction

    Science.gov (United States)

    Liu, Di-Jia; Yang, Junbing; Wang, Xiaoping

    2010-08-03

    A catalyst for an electro-chemical oxygen reduction reaction (ORR) of a bundle of longitudinally aligned carbon nanotubes having a catalytically active transition metal incorporated longitudinally in said nanotubes. A method of making an electro-chemical catalyst for an oxygen reduction reaction (ORR) having a bundle of longitudinally aligned carbon nanotubes with a catalytically active transition metal incorporated throughout the nanotubes, where a substrate is in a first reaction zone, and a combination selected from one or more of a hydrocarbon and an organometallic compound containing an catalytically active transition metal and a nitrogen containing compound and an inert gas and a reducing gas is introduced into the first reaction zone which is maintained at a first reaction temperature for a time sufficient to vaporize material therein. The vaporized material is then introduced to a second reaction zone maintained at a second reaction temperature for a time sufficient to grow longitudinally aligned carbon nanotubes over the substrate with a catalytically active transition metal incorporated throughout the nanotubes.

  11. Catalytic Intermolecular Cross-Couplings of Azides and LUMO-Activated Unsaturated Acyl Azoliums

    KAUST Repository

    Li, Wenjun

    2017-02-15

    An example for the catalytic synthesis of densely functionalized 1,2,3-triazoles through a LUMO activation mode has been developed. The protocol is enabled by intermolecular cross coupling reactions of azides with in situ-generated alpha,beta-unsaturated acyl azoliums. High yields and broad scope as well as the investigation of reaction mechanism are reported.

  12. Natural clinoptilolite exchanged with iron: characterization and catalytic activity in nitrogen monoxide reduction

    Directory of Open Access Journals (Sweden)

    Daria Tito-Ferro

    2016-12-01

    Full Text Available The aim of this work was to characterize the natural clinoptilolite from Tasajeras deposit, Cuba, modified by hydrothermal ion-exchange with solutions of iron (II sulfate and iron (III nitrate in acid medium. Besides this, its catalytic activity to reduce nitrogen monoxide with carbon monoxide/propene in the presence of oxygen was evaluated. The characterization was performed by Mössbauer and UV-Vis diffuse reflectance spectroscopies and adsorption measurements. The obtained results lead to conclude that in exchanged samples, incorporated divalent and trivalent irons are found in octahedral coordination. Both irons should be mainly in cationic extra-framework positions inside clinoptilolite channels as charge compensating cations, and also as iron oxy-hydroxides resulting from limited hydrolysis of these cations. The iron (III exchanged samples has a larger amount of iron oxy-hydroxides agglomerates. The iron (II exchanged samples have additionally iron (II sulfate adsorbed. The catalytic activity in the nitrogen monoxide reduction is higher in the exchanged zeolites than starting. Among all samples, those exchanged of iron (II has the higher catalytic activity. This lead to outline that, main catalytically active centers are associated with divalent iron.

  13. SYNTHESIS AND CATALYTIC ACTIVITY OF PLATINUM COMPLEX OF ACRYLATE TERPOLYMER WITH Se,N BIDENTATE LIGAND

    Institute of Scientific and Technical Information of China (English)

    MengLingzhi; QiLiangwei; 等

    1998-01-01

    Acrylate terpolymer-bound Se,N bidentate ligand was synthesized from the side chain chlorine of copolymer and β-dimethylamino-β′-hydroxyl-diethyl selenoether.The polymer-supported platinum complex exhibited high catalytic activity in the hydrosilylation of olefins with triethoxysilane.

  14. Modulation of catalytic activity in multi-domain protein tyrosine phosphatases.

    Directory of Open Access Journals (Sweden)

    Lalima L Madan

    Full Text Available Signaling mechanisms involving protein tyrosine phosphatases govern several cellular and developmental processes. These enzymes are regulated by several mechanisms which include variation in the catalytic turnover rate based on redox stimuli, subcellular localization or protein-protein interactions. In the case of Receptor Protein Tyrosine Phosphatases (RPTPs containing two PTP domains, phosphatase activity is localized in their membrane-proximal (D1 domains, while the membrane-distal (D2 domain is believed to play a modulatory role. Here we report our analysis of the influence of the D2 domain on the catalytic activity and substrate specificity of the D1 domain using two Drosophila melanogaster RPTPs as a model system. Biochemical studies reveal contrasting roles for the D2 domain of Drosophila Leukocyte antigen Related (DLAR and Protein Tyrosine Phosphatase on Drosophila chromosome band 99A (PTP99A. While D2 lowers the catalytic activity of the D1 domain in DLAR, the D2 domain of PTP99A leads to an increase in the catalytic activity of its D1 domain. Substrate specificity, on the other hand, is cumulative, whereby the individual specificities of the D1 and D2 domains contribute to the substrate specificity of these two-domain enzymes. Molecular dynamics simulations on structural models of DLAR and PTP99A reveal a conformational rationale for the experimental observations. These studies reveal that concerted structural changes mediate inter-domain communication resulting in either inhibitory or activating effects of the membrane distal PTP domain on the catalytic activity of the membrane proximal PTP domain.

  15. Structural Basis for the Catalytic Activity of Human SER/THR Protein Phosphatase-5

    Science.gov (United States)

    Swingle, M. R.; Honkanen, R.; Ciszak, E.

    2004-01-01

    Serinekhreonine protein phosphatase-5 (PP5) affects many signaling networks that regulate cell growth. Here we report the 1.6 Angstrom resolution crystal structure of PP5 catalytic domain with metal and phosphate ions in the active site. The structure reveals a mechanism for PPS-mediated catalysis that requires the precise positioning of two metal ions within a conserved Asp(sup 271)-M(sub 1),-M(sub 2)-His(sup 427)-W(sup 2)-His(sup 304)-Asp(sup 274) catalytic motif, and provides a structural basis for the exceptional catalytic proficiency of protein phosphatases placing them among the most powerful catalysts. Resolution of the entire C-terminus revealed a novel subdomain, and the structure of PP5 should aid development of specific inhibitors.

  16. Controllable synthesis and catalytic activity of SnO_2 nanostructures at room temperature

    Institute of Scientific and Technical Information of China (English)

    ZHAO Qing-rui

    2009-01-01

    SnO_2 hollow spheres and rod bundles were prepared using SnSO_4 as raw material and sodium dodecyl benzenesulfonate and poly(vinyl pyrrolidone) as templates at room temperature through oxidation-crystallization of colloidal spheres in different systems. The products were characterized with X-ray diffractometer, X-ray photoelectron spectrometer, transmission electron microscope and scanning electron microscope. Meanwhile, the catalytic performance of the SnO_2 hollow spheres and rod bundles toward CO oxidation was studied. The result indicates that SnO_2 hollow spheres with the uniform size exhibit a better catalytic activity toward CO oxidation, suggesting that the morphology of the materials has exerted a noticeable influence on the catalytic performance.

  17. A Polyphenylene Support for Pd Catalysts with Exceptional Catalytic Activity

    DEFF Research Database (Denmark)

    Wang, Feng; Mielby, Jerrik Jørgen; Richter, Felix Herrmann

    2014-01-01

    We describe a solid polyphenylene support that serves as an excellent platform for metal-catalyzed reactions that are normally carried out under homogeneous conditions. The catalyst is synthesized by palladium-catalyzed Suzuki coupling which directly results in formation of palladium nanoparticles...... confined to a porous polyphenylene network. The composite solid is in turn highly active for further Suzuki coupling reactions, including non-activated substrates that are challenging even for molecular catalysts....

  18. Lipase immobilized catalytically active membrane for synthesis of lauryl stearate in a pervaporation membrane reactor.

    Science.gov (United States)

    Zhang, Weidong; Qing, Weihua; Ren, Zhongqi; Li, Wei; Chen, Jiangrong

    2014-11-01

    A composite catalytically active membrane immobilized with Candida rugosa lipase has been prepared by immersion phase inversion technique for enzymatic synthesis of lauryl stearate in a pervaporation membrane reactor. SEM images showed that a "sandwich-like" membrane structure with a porous lipase-PVA catalytic layer uniformly coated on a polyvinyl alcohol (PVA)/polyethersulfone (PES) bilayer was obtained. Optimum conditions for lipase immobilization in the catalytic layer were determined. The membrane was proved to exhibit superior thermal stability, pH stability and reusability than free lipase under similar conditions. In the case of pervaporation coupled synthesis of lauryl stearate, benefited from in-situ water removal by the membrane, a conversion enhancement of approximately 40% was achieved in comparison to the equilibrium conversion obtained in batch reactors. In addition to conversion enhancement, it was also found that excess water removal by the catalytically active membrane appears to improve activity of the lipase immobilized. Copyright © 2014 Elsevier Ltd. All rights reserved.

  19. Impact of active phase chemical composition and dispersity on catalytic behavior in PROX reaction

    Science.gov (United States)

    Cherkezova-Zheleva, Z.; Paneva, D.; Todorova, S.; Kolev, H.; Shopska, M.; Yordanova, I.; Mitov, I.

    2014-04-01

    Iron and iron-platinum catalysts supported on activated carbon have been successfully synthesized by wet impregnation method and low-temperature treatment in inert atmosphere. The content of the supported phases corresponds to 10 wt % Fe and 0.5 wt % Pt. Four catalytic samples were synthesized: Sample A—activated carbon impregnated with Fe nitrate; Sample B—activated carbon impregnated with Pt salt; Sample C—activated carbon impregnated consequently with Fe and Pt salts; Sample D—activated carbon impregnated simultaneously with Fe and Pt salts. The as-prepared materials were characterized by Mössbauer spectroscopy, X-ray diffraction, infrared and X-ray photoelectron spectroscopy. The spectra show that the activated carbon support and the preparation procedure give rise to the synthesis of isolated metal Pt ions and ultradispersed Fe and Pt oxide species. Probably the presence of different functional groups of activated carbon gives rise to registered very high dispersion of loaded species on support. The catalytic tests were carried out in PROX reaction. A lower activity of bimetallic Pt-Fe samples was explained with the increase in surface oxygen species as a result of predomination of iron oxide on the support leading to the increase in selectivity to the H2 oxidation. Partial agglomeration of supported iron oxide phase was registered after catalytic tests.

  20. Anacardic acid inhibits the catalytic activity of matrix metalloproteinase-2 and matrix metalloproteinase-9.

    Science.gov (United States)

    Omanakuttan, Athira; Nambiar, Jyotsna; Harris, Rodney M; Bose, Chinchu; Pandurangan, Nanjan; Varghese, Rebu K; Kumar, Geetha B; Tainer, John A; Banerji, Asoke; Perry, J Jefferson P; Nair, Bipin G

    2012-10-01

    Cashew nut shell liquid (CNSL) has been used in traditional medicine for the treatment of a wide variety of pathophysiological conditions. To further define the mechanism of CNSL action, we investigated the effect of cashew nut shell extract (CNSE) on two matrix metalloproteinases, MMP-2/gelatinase A and MMP-9/gelatinase B, which are known to have critical roles in several disease states. We observed that the major constituent of CNSE, anacardic acid, markedly inhibited the gelatinase activity of 3T3-L1 cells. Our gelatin zymography studies on these two secreted gelatinases, present in the conditioned media from 3T3-L1 cells, established that anacardic acid directly inhibited the catalytic activities of both MMP-2 and MMP-9. Our docking studies suggested that anacardic acid binds into the MMP-2/9 active site, with the carboxylate group of anacardic acid chelating the catalytic zinc ion and forming a hydrogen bond to a key catalytic glutamate side chain and the C15 aliphatic group being accommodated within the relatively large S1' pocket of these gelatinases. In agreement with the docking results, our fluorescence-based studies on the recombinant MMP-2 catalytic core domain demonstrated that anacardic acid directly inhibits substrate peptide cleavage in a dose-dependent manner, with an IC₅₀ of 11.11 μM. In addition, our gelatinase zymography and fluorescence data confirmed that the cardol-cardanol mixture, salicylic acid, and aspirin, all of which lack key functional groups present in anacardic acid, are much weaker MMP-2/MMP-9 inhibitors. Our results provide the first evidence for inhibition of gelatinase catalytic activity by anacardic acid, providing a novel template for drug discovery and a molecular mechanism potentially involved in CNSL therapeutic action.

  1. Synthesis, Characterization and Catalytic Activity of Cu/Cu2O Nanoparticles Prepared in Aqueous Medium

    Directory of Open Access Journals (Sweden)

    Sayed M. Badawy

    2015-07-01

    Full Text Available Copper/Copper oxide (Cu/Cu2O nanoparticles were synthesized by modified chemical reduction method in an aqueous medium using hydrazine as reducing agent and copper sulfate pentahydrate as precursor. The Cu/Cu2O nanoparticles were characterized by X-ray Diffraction (XRD, Energy Dispersive X-ray Fluorescence (EDXRF, Scanning Electron Microscope (SEM, and Transmission Electron Microscope (TEM. The analysis revealed the pattern of face-centered cubic (fcc crystal structure of copper Cu metal and cubic cuprites structure for Cu2O. The SEM result showed monodispersed and agglomerated particles with two micron sizes of about 180 nm and 800 nm, respectively. The TEM result showed few single crystal particles of face-centered cubic structures with average particle size about 11-14 nm. The catalytic activity of Cu/Cu2O nanoparticles for the decomposition of hydrogen peroxide was investigated and compared with manganese oxide MnO2. The results showed that the second-order equation provides the best correlation for the catalytic decomposition of H2O2 on Cu/Cu2O. The catalytic activity of hydrogen peroxide by Cu/Cu2O is less than the catalytic activity of MnO2 due to the presence of copper metal Cu with cuprous oxide Cu2O. © 2015 BCREC UNDIP. All rights reservedReceived: 6th January 2015; Revised: 14th March 2015; Accepted: 15th March 2015How to Cite: Badawy, S.M., El-Khashab, R.A., Nayl, A.A. (2015. Synthesis, Characterization and Catalytic Activity of Cu/Cu2O Nanoparticles Prepared in Aqueous Medium. Bulletin of Chemical Reaction Engineering & Catalysis, 10 (2: 169-174. (doi:10.9767/bcrec.10.2.7984.169-174 Permalink/DOI: http://dx.doi.org/10.9767/bcrec.10.2.7984.169-174  

  2. Investigation of the Origin of Catalytic Activity in Oxide-Supported Nanoparticle Gold

    Energy Technology Data Exchange (ETDEWEB)

    Harrison, Ian [Univ. of Virginia, Charlottesville, VA (United States)

    2017-05-26

    Since Haruta’s discovery in 1987 of the surprising catalytic activity of supported Au nanoparticles, we have seen a very large number of experimental and theoretical efforts to explain this activity and to fully understand the nature of the behavior of the responsible active sites. In 2011, we discovered that a dual catalytic site at the perimeter of ~3nm diameter Au particles supported on TiO2 is responsible for oxidative catalytic activity. O2 molecules bind with Au atoms and Ti4+ ions in the TiO2 support and the weakened O-O bond dissociates at low temperatures, proceeding to produce O atoms which act as oxidizing agents for the test molecule, CO. The papers supported by DOE have built on this finding and have been concerned with two aspects of the behavior of Au/TiO2 catalysts: (1). Mechanistic behavior of dual catalytic sites in the oxidation of organic molecules such as ethylene and acetic acid; (2). Studies of the electronic properties of the TiO2 (110) single crystal in relation to its participation in charge transfer at the occupied dual catalytic site. A total of 20 papers have been produced through DOE support of this work. The papers combine IR spectroscopic investigations of Au/TiO2 catalysts with surface science on the TiO2(110) and TiO2 nanoparticle surfaces with modern density functional modeling. The primary goals of the work were to investigate the behavior of the dual Au/Ti4+ site for the partial oxidation of alcohols to acids, the hydrogenation of aldehydes and ketones to alcohols, and the condensation of oxygenate intermediates- all processes related to the utilization of biomass in the production of useful chemical energy sources.

  3. Flexible macrocycles as versatile supports for catalytically active metal clusters

    Energy Technology Data Exchange (ETDEWEB)

    Ryan, JD; Gagnon, KJ; Teat, SJ; McIntosh, RD

    2016-02-12

    Here we present three structurally diverse clusters stabilised by the same macrocyclic polyphenol; t-butylcalix[8]arene. This work demonstrates the range of conformations the flexible ligand is capable of adopting, highlighting its versatility in metal coordination. In addition, a Ti complex displays activity for the ring-opening polymerisation of lactide

  4. Functional and catalytic active sites prediction and docking analysis ...

    African Journals Online (AJOL)

    Bioinformatics

    2015-07-01

    Jul 1, 2015 ... industrially important azo dyes such as the molecular weight, molecular ... et al., 2010). The software possesses structure-based method to predict active sites in proteins based on a Difference of Gaussian (DoG) approach ...

  5. Trends in Catalytic Activity for SOFC Anode materials

    DEFF Research Database (Denmark)

    Rossmeisl, Jan; Bessler, W. G.

    2008-01-01

    for solid oxide fuel cell (SOFC) anodes. The reaction energies along the hydrogen oxidation pathway were quantified for both, oxygen spillover and hydrogen spillover mechanisms at the three-phase boundary. The ab initio results are compared to previously-obtained experimental anode activities measured...

  6. First principles (DFT) characterization of Rh(I) /dppp-catalyzed C-H activation by tandem 1,2-addition/1,4-Rh shift reactions of norbornene to phenylboronic acid.

    Science.gov (United States)

    Kantchev, Eric Assen B; Pangestu, Surya R; Zhou, Feng; Sullivan, Michael B; Su, Hai-Bin

    2014-11-17

    The C-H activation in the tandem, "merry-go-round", [(dppp)Rh]-catalyzed (dppp=1,3-bis(diphenylphosphino)propane), four-fold addition of norborene to PhB(OH)2 has been postulated to occur by a C(alkyl)H oxidative addition to square-pyramidal Rh(III) -H species, which in turn undergoes a C(aryl)-H reductive elimination. Our DFT calculations confirm the Rh(I) /Rh(III) mechanism. At the IEFPCM(toluene, 373.15 K)/PBE0/DGDZVP level of theory, the oxidative addition barrier was calculated to be 12.9 kcal mol(-1) , and that of reductive elimination was 5.0 kcal mol(-1) . The observed selectivity of the reaction correlates well with the relative energy barriers of the cycle steps. The higher barrier (20.9 kcal mol(-1) ) for norbornyl-Rh protonation ensures that the reaction is steered towards the 1,4-shift (total barrier of 16.3 kcal mol(-1) ), acting as an equilibration shuttle. The carborhodation (13.2 kcal mol(-1) ) proceeds through a lower barrier than the protonation (16.7 kcal mol(-1) ) of the rearranged aryl-Rh species in the absence of o- or m-substituents, ensuring multiple carborhodations take place. However, for 2,5-dimethylphenyl, which was used as a model substrate, the barrier for carborhodation is increased to 19.4 kcal mol(-1) , explaining the observed termination of the reaction at 1,2,3,4-tetra(exo-norborn-2-yl)benzene. Finally, calculations with (Z)-2-butene gave a carborhodation barrier of 20.2 kcal mol(-1) , suggesting that carborhodation of non-strained, open-chain substrates would be disfavored relative to protonation. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Study on the active sites of Cu-ZSM-5 in trichloroethylene catalytic combustion with air

    Institute of Scientific and Technical Information of China (English)

    Cheng Hua Xu; Chuan Qi Liu; Yan Zhong; Xiu Zhou Yang; Jian Ying Liu; Ying Chun Yang; Zhi Xiang Ye

    2008-01-01

    The catalytic activity of Cu-ZSM-5 in trichloroethylene (TCE) combustion increases with the increasing skeletal Cu amount and however decreases with the increase of surface amorphous CuO,which is detected by infrared spectroscopy (IR) and diffuse reflectance ultraviolet-visible spectroscopy (DRS-UV-vis),therefore the skeletal Cu species are concluded to be the active sites for the TCE combustion.

  8. Nobel metal-TiO2 nanocomposites : synthesis, characterization and catalytic activity

    OpenAIRE

    Nascimento, Ana Cláudia Lobão do

    2016-01-01

    The work presented in this thesis is focused on the synthesis, characterization and catalytic activity of gold-TiO2 composites. We wanted to take advantage of the experience of the Colloid Chemistry Group, whose activity is strongly focused on the synthesis, characterization and evaluation of the formation mechanism of metal nanocrystals (mainly gold and silver) with size and shape control, which allows a fine-tuning of the optical response of these colloids in the UV-vis-NIR spectral range. ...

  9. Chelating ruthenium phenolate complexes: synthesis, general catalytic activity, and applications in olefin metathesis polymerization.

    Science.gov (United States)

    Kozłowska, Anna; Dranka, Maciej; Zachara, Janusz; Pump, Eva; Slugovc, Christian; Skowerski, Krzysztof; Grela, Karol

    2014-10-20

    Cyclic Ru-phenolates were synthesized, and these compounds were used as olefin metathesis catalysts. Investigation of their catalytic activity pointed out that, after activation with chemical agents, these catalysts promote ring-closing metathesis (RCM), enyne and cross-metathesis (CM) reactions, including butenolysis, with good results. Importantly, these latent catalysts are soluble in neat dicyclopentadiene (DCPD) and show good applicability in ring-opening metathesis polymeriyation (ROMP) of this monomer.

  10. Spectroscopic properties and the catalytic activity of new organo-lead supramolecular coordination polymer containing quinoxaline

    Science.gov (United States)

    Etaiw, Safaa El-din H.; Abdou, Safaa N.

    2015-01-01

    The 3D-supramolecular coordination polymer (SCP) 3∞[ Cu2(CN)3(Me3Pb)(qox)], 1, as the first example of the CuCN SCP containing the (Me3Pb) fragment, was explored to investigate its catalytic and photo-catalytic activities. The structure of 1 contains two chemically identical but crystallographically different [Cu2(CN)3ṡMe3Pbṡqox]2 units with four Cu(I) sites assuming distorted TP-3 geometry. Two non-linear chains of equal abundance are formed producing corrugated parallel chains which are connected laterally by quinoxaline creating 2D-layers which are arranged parallel in an (AB⋯AB⋯AB)n fashion forming 3D-network. IR, mass, electronic absorption and fluorescence spectra are also investigated. The SCP 1 is diamagnetic and exhibits good catalytic and photo-catalytic activities for the degradation of methylene blue (MB). The reaction is first order with respect to MB dye. The irradiation of the reaction with UV-light enhanced the rate of MB mineralization. The efficiency of recycled the 1 and the mechanism of degradation of MB dye were investigated.

  11. Aged nano-structured platinum based catalyst: effect of chemical treatment on adsorption and catalytic activity.

    Science.gov (United States)

    Shim, Wang Geun; Nahm, Seung Won; Park, Hyuk Ryeol; Yun, Hyung Sun; Seo, Seong Gyu; Kim, Sang Chai

    2011-02-01

    To examine the effect of chemical treatment on the adsorption and catalytic activity of nanostructured platinum based catalyst, the aged commercial Pt/AC catalyst was pretreated with sulfuric acid (H2SO4) and a cleaning agent (Hexane). Several reliable methods such as nitrogen adsorption, X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and inductively coupled plasma (ICP) were employed to characterize the aged Pt/AC catalyst and its chemically pretreated Pt/AC catalysts. The catalytic and adsorption activities of nano-structured heterogeneous Pt/AC catalyst were investigated on the basis of toluene oxidation and adsorption isotherm data. In addition, the adsorption isotherms of toluene were used to calculate the adsorption energy distribution functions for the parent catalyst and its pre-treated nano-structured Pt/AC catalysts. It was found that sulfuric acid aqueous treatment can enhance the catalytic performance of aged Pt/AC catalyst toward catalytic oxidation of toluene. It was also shown that a comparative analysis of the energy distribution functions for nano-structured Pt/AC catalysts as well as the pore size distribution provides valuable information about their structural and energetic heterogeneity.

  12. Comparative catalytic activity of PET track-etched membranes with embedded silver and gold nanotubes

    Science.gov (United States)

    Mashentseva, Anastassiya; Borgekov, Daryn; Kislitsin, Sergey; Zdorovets, Maxim; Migunova, Anastassiya

    2015-12-01

    Irradiated by heavy ions nanoporous polyethylene terephthalate track-etched membranes (PET TeMs) after +15Kr84 ions bombardment (1.75 MeV/nucl with the ion fluency of 1 × 109 cm-2) and sequential etching was applied in this research as a template for development of composites with catalytically enriched properties. A highly ordered silver and gold nanotubes arrays were embedded in 100 nm pores of PET TeMs via electroless deposition technique at 4 °C during 1 h. All "as-prepared" composites were examined for catalytic activity using reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) by sodium borohydride as a common reaction to test metallic nanostructures catalysts. The effect of temperature on the catalytic activity was investigated in range of 292-313 K and activation energy were calculated. Kapp of Ag/PET composites linearly increase with an increase of the temperature thus normal Arrhenius behavior have been seen and the activation energy was calculated to be 42.13 kJ/mol. Au/PET composites exhibit not only more powerful catalytic activity but also non-linear dependence of rate constant from temperature. Kapp increased with increasing temperature throughout the 292-308 K temperature range; the reaction had an activation energy 65.32 kJ/mol. In range 311-313 K rate constant dramatically decreased and the apparent activation energy at this temperature rang was -91.44 kJ/mol due some structural changes, i.e. agglomeration of Au nanoparticles on the surface of composite.

  13. Comparative catalytic activity of PET track-etched membranes with embedded silver and gold nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Mashentseva, Anastassiya, E-mail: mashentseva.a@gmail.com [Institute of Nuclear Physics, Ibragimov St. 1, 050032 Almaty (Kazakhstan); The L.N. Gumilyov Eurasian National University, Satpayev Str., 2, 010008 Astana (Kazakhstan); Borgekov, Daryn [Institute of Nuclear Physics, Ibragimov St. 1, 050032 Almaty (Kazakhstan); The L.N. Gumilyov Eurasian National University, Satpayev Str., 2, 010008 Astana (Kazakhstan); Kislitsin, Sergey [Institute of Nuclear Physics, Ibragimov St. 1, 050032 Almaty (Kazakhstan); Zdorovets, Maxim [Institute of Nuclear Physics, Ibragimov St. 1, 050032 Almaty (Kazakhstan); The L.N. Gumilyov Eurasian National University, Satpayev Str., 2, 010008 Astana (Kazakhstan); Migunova, Anastassiya [Institute of Nuclear Physics, Ibragimov St. 1, 050032 Almaty (Kazakhstan)

    2015-12-15

    Irradiated by heavy ions nanoporous polyethylene terephthalate track-etched membranes (PET TeMs) after {sup +15}Kr{sup 84} ions bombardment (1.75 MeV/nucl with the ion fluency of 1 × 10{sup 9} cm{sup −2}) and sequential etching was applied in this research as a template for development of composites with catalytically enriched properties. A highly ordered silver and gold nanotubes arrays were embedded in 100 nm pores of PET TeMs via electroless deposition technique at 4 °C during 1 h. All “as-prepared” composites were examined for catalytic activity using reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) by sodium borohydride as a common reaction to test metallic nanostructures catalysts. The effect of temperature on the catalytic activity was investigated in range of 292–313 K and activation energy were calculated. K{sub app} of Ag/PET composites linearly increase with an increase of the temperature thus normal Arrhenius behavior have been seen and the activation energy was calculated to be 42.13 kJ/mol. Au/PET composites exhibit not only more powerful catalytic activity but also non-linear dependence of rate constant from temperature. K{sub app} increased with increasing temperature throughout the 292–308 K temperature range; the reaction had an activation energy 65.32 kJ/mol. In range 311–313 K rate constant dramatically decreased and the apparent activation energy at this temperature rang was −91.44 kJ/mol due some structural changes, i.e. agglomeration of Au nanoparticles on the surface of composite.

  14. Stability and phase transfer of catalytically active platinum nanoparticle suspensions

    Energy Technology Data Exchange (ETDEWEB)

    Sriram, Indira; Curtin, Alexandra E.; Chiaramonti, Ann N.; Cuchiaro, J. Hunter; Weidner, Andrew R.; Tingley, Tegan M.; Greenlee, Lauren F.; Jeerage, Kavita M., E-mail: jeerage@boulder.nist.gov [National Instrument of Standards and Technology, Applied Chemicals and Materials Division (United States)

    2015-05-15

    In this work, we present a robust synthesis protocol for platinum nanoparticles that yields a monomodal dispersion of particles that are approximately 100 nm in diameter. We determine that these particles are actually agglomerates of much smaller particles, creating a “raspberry” morphology. We demonstrate that these agglomerates are stable at room temperature for at least 8 weeks by dynamic light scattering. Furthermore, we demonstrate consistent electrocatalytic activity for methanol oxidation. Finally, we quantitatively explore the relationship between dispersion solvent and particle agglomeration; specifically, particles are found to agglomerate abruptly as solvent polarity decreases.

  15. C-H ACTIVATION REACTIONS BY YTTRIUM AND LUTETIUM HYDRIDE COMPLEXES - H/D EXCHANGE VS METALATION OF HYDROCARBONS - IMPORTANCE OF THE HYBRIDIZATION STATE AT THE ALPHA-CARBON

    NARCIS (Netherlands)

    DEELMAN, BJ; TEUBEN, JH; MACGREGOR, SA; EISENSTEN, O

    1995-01-01

    Extended Huckel (EHT) calculations have been used to discuss the two alternative sigma-bond C-H metathesis reactions which occur with organo-lanthanide (Ln = Y, Lu) compounds. The two reactions lead either to H/H (H/D) exchange or to metalation and have been modelled by studying the interaction of a

  16. Catalytic oxidation ofS(IV) on activated carbon in aqueous suspension: kinetics and mechanism

    Energy Technology Data Exchange (ETDEWEB)

    Brodzinsky, R.

    1981-02-01

    Activated carbon and combustion produced soot particles have been studied for their catalytic effect on the oxidation of aqueous sulfur(IV) species. Detailed kinetic studies of the reaction were performed on three different activated carbons and on a soot collected in a highway tunnel. Combustion produced soots were tested for their catalytic behavior and found to be similar to the activated carbons. The reaction rate was found to be linearly dependent on the concentration of carbon particles in the solution. The rate was found to follow a Langmuir adsorption isotherm for its dependence on oxygen and the product of two adsorption isotherms for S(IV). The reaction is independent of the pH of the solution when the pH is below 7.6. The reaction does not occur when the pH is above 7.6. The three aqueous S(IV) species are catalyzed in their oxidation by the carbon particles in a similar manner. Activation energies for the reactions on the different carbons are all about 8.5 kcal/mole. A possible four-step reaction mechanism is proposed. It consists of the adsorption of a dissolved oxygen molecule onto the carbon surface, followed by the adsorption of two S(IV) molecules or ions. These are oxidized on the surface to sulfate, which desorbs from the surface, regenerating the catalytically active site.

  17. Structure-based rational design of streptavidin mutants with pseudo-catalytic activity.

    Science.gov (United States)

    Pazy, Yael; Raboy, Bilha; Matto, Meirav; Bayer, Edward A; Wilchek, Meir; Livnah, Oded

    2003-02-28

    Introduction of enzymatic activity into proteins or other types of polymers by rational design is a major objective in the life sciences. To date, relatively low levels of enzymatic activity could be introduced into antibodies by using transition-state analogues of haptens. In the present study, we identify the structural elements that contribute to the observed hydrolytic activity in egg white avidin, which promote the cleavage of active biotin esters (notably biotinyl p-nitrophenyl ester). The latter elements were then incorporated into bacterial streptavidin via genetic engineering. The streptavidin molecule was thus converted from a protector to an enhancer of hydrolysis of biotin esters. The conversion was accomplished by the combined replacement of a "lid-like loop" (L3,4) and a leucine-to-arginine point mutation in streptavidin. Interestingly, neither of these elements play a direct role in the hydrolytic reaction. The latter features were thus shown to be responsible for enhanced substrate hydrolysis. This work indicates that structural and non-catalytic elements of a protein can be modified to promote the induced fit of a substrate for subsequent interaction with either a catalytic residue or water molecules. This approach complements the conventional design of active sites that involves direct modifications of catalytic residues.

  18. Structural properties of cyanase. Denaturation, renaturation, and role of sulfhydryls and oligomeric structure in catalytic activity.

    Science.gov (United States)

    Little, R M; Anderson, P M

    1987-07-25

    Cyanase is an inducible enzyme in Escherichia coli that catalyzes bicarbonate-dependent decomposition of cyanate to give ammonia and bicarbonate. The enzyme is composed of 8-10 identical subunits (Mr = 17,008). The objective of this study was to clarify some of the structural properties of cyanase for the purpose of understanding the relationship between oligomeric structure and catalytic activity. Circular dichroism studies showed that cyanase has a significant amount of alpha-helix and beta-sheet structure. The one sulfhydryl group per subunit does not react with 5,5'-dithiobis-(2-nitrobenzoic acid) (DTNB) unless cyanase is denatured. Denaturation is apparently complete in 10 M urea or 6 M guanidine hydrochloride, but is significantly reduced in 10 M urea by the presence of azide (analog of cyanate) and is incomplete in 8 M urea. Denatured cyanase could be renatured and reactivated (greater than 85%) by removal of denaturants. Reactivation was greatly facilitated by the presence of certain anions, particularly bicarbonate, and by high ionic strength and protein concentration. The catalytic activity of renatured cyanase was associated only with oligomer. Cyanase that had been denatured in the presence of DTNB to give a cyanase-DTNB derivative could also be renatured at 26 degrees C to give active cyanase-DTNB oligomer. The active oligomeric form of the cyanase-DTNB derivative could be converted reversibly to inactive dimer by lowering the temperature to 4 degrees C or by reduction of the ionic strength and removal of monoanions. These results provide evidence that free sulfhydryl groups are not required for catalytic activity and that catalytic activity may be dependent upon oligomeric structure.

  19. Comprehensive Characterization of AMP-Activated Protein Kinase Catalytic Domain by Top-Down Mass Spectrometry

    Science.gov (United States)

    Yu, Deyang; Peng, Ying; Ayaz-Guner, Serife; Gregorich, Zachery R.; Ge, Ying

    2016-02-01

    AMP-activated protein kinase (AMPK) is a serine/threonine protein kinase that is essential in regulating energy metabolism in all eukaryotic cells. It is a heterotrimeric protein complex composed of a catalytic subunit (α) and two regulatory subunits (β and γ). C-terminal truncation of AMPKα at residue 312 yielded a protein that is active upon phosphorylation of Thr172 in the absence of β and γ subunits, which is refered to as the AMPK catalytic domain and commonly used to substitute for the AMPK heterotrimeric complex in in vitro kinase assays. However, a comprehensive characterization of the AMPK catalytic domain is lacking. Herein, we expressed a His-tagged human AMPK catalytic domin (denoted as AMPKΔ) in E. coli, comprehensively characterized AMPKΔ in its basal state and after in vitro phosphorylation using top-down mass spectrometry (MS), and assessed how phosphorylation of AMPKΔ affects its activity. Unexpectedly, we found that bacterially-expressed AMPKΔ was basally phosphorylated and localized the phosphorylation site to the His-tag. We found that AMPKΔ had noticeable basal activity and was capable of phosphorylating itself and its substrates without activating phosphorylation at Thr172. Moreover, our data suggested that Thr172 is the only site phosphorylated by its upstream kinase, liver kinase B1, and that this phosphorylation dramatically increases the kinase activity of AMPKΔ. Importantly, we demonstrated that top-down MS in conjunction with in vitro phosphorylation assay is a powerful approach for monitoring phosphorylation reaction and determining sequential order of phosphorylation events in kinase-substrate systems.

  20. Phosphorylation of Leukotriene C4 Synthase at Serine 36 Impairs Catalytic Activity.

    Science.gov (United States)

    Ahmad, Shabbir; Ytterberg, A Jimmy; Thulasingam, Madhuranayaki; Tholander, Fredrik; Bergman, Tomas; Zubarev, Roman; Wetterholm, Anders; Rinaldo-Matthis, Agnes; Haeggström, Jesper Z

    2016-08-26

    Leukotriene C4 synthase (LTC4S) catalyzes the formation of the proinflammatory lipid mediator leukotriene C4 (LTC4). LTC4 is the parent molecule of the cysteinyl leukotrienes, which are recognized for their pathogenic role in asthma and allergic diseases. Cellular LTC4S activity is suppressed by PKC-mediated phosphorylation, and recently a downstream p70S6k was shown to play an important role in this process. Here, we identified Ser(36) as the major p70S6k phosphorylation site, along with a low frequency site at Thr(40), using an in vitro phosphorylation assay combined with mass spectrometry. The functional consequences of p70S6k phosphorylation were tested with the phosphomimetic mutant S36E, which displayed only about 20% (20 μmol/min/mg) of the activity of WT enzyme (95 μmol/min/mg), whereas the enzyme activity of T40E was not significantly affected. The enzyme activity of S36E increased linearly with increasing LTA4 concentrations during the steady-state kinetics analysis, indicating poor lipid substrate binding. The Ser(36) is located in a loop region close to the entrance of the proposed substrate binding pocket. Comparative molecular dynamics indicated that Ser(36) upon phosphorylation will pull the first luminal loop of LTC4S toward the neighboring subunit of the functional homotrimer, thereby forming hydrogen bonds with Arg(104) in the adjacent subunit. Because Arg(104) is a key catalytic residue responsible for stabilization of the glutathione thiolate anion, this phosphorylation-induced interaction leads to a reduction of the catalytic activity. In addition, the positional shift of the loop and its interaction with the neighboring subunit affect active site access. Thus, our mutational and kinetic data, together with molecular simulations, suggest that phosphorylation of Ser(36) inhibits the catalytic function of LTC4S by interference with the catalytic machinery. © 2016 by The American Society for Biochemistry and Molecular Biology, Inc.

  1. Rational design of ornithine decarboxylase with high catalytic activity for the production of putrescine.

    Science.gov (United States)

    Choi, Hyang; Kyeong, Hyun-Ho; Choi, Jung Min; Kim, Hak-Sung

    2014-09-01

    Putrescine finds wide industrial applications in the synthesis of polymers, pharmaceuticals, agrochemicals, and surfactants. Owing to economic and environmental concerns, the microbial production of putrescine has attracted a great deal of attention, and ornithine decarboxylase (ODC) is known to be a key enzyme in the biosynthetic pathway. Herein, we present the design of ODC from Escherichia coli with high catalytic efficiency using a structure-based rational approach. Through a substrate docking into the model structure of the enzyme, we first selected residues that might lead to an increase in catalytic activity. Of the selected residues that are located in the α-helix and the loops constituting the substrate entry site, a mutational analysis of the single mutants identified two key residues, I163 and E165. A combination of two single mutations resulted in a 62.5-fold increase in the catalytic efficiency when compared with the wild-type enzyme. Molecular dynamics simulations of the best mutant revealed that the substrate entry site becomes more flexible through mutations, while stabilizing the formation of the dimeric interface of the enzyme. Our approach can be applied to the design of other decarboxylases with high catalytic efficiency for the production of various chemicals through bio-based processes.

  2. Preparation of amino-functionalized regenerated cellulose membranes with high catalytic activity.

    Science.gov (United States)

    Wang, Wei; Bai, Qian; Liang, Tao; Bai, Huiyu; Liu, Xiaoya

    2017-09-01

    The modification of regenerated cellulose (RC) membranes was carried out by using silane coupling agents presenting primary and secondary amino-groups. The grafting of the amino groups onto the modified cellulose molecule was confirmed by X-ray photoelectron spectroscopies and (13)C nuclear magnetic resonance spectroscopic analyses. The crystallinity of the cellulose membranes (CM) decreased after chemical modification as indicated by the X-ray diffraction results. Moreover, a denser structure was observed at the surface and cross section of the modified membranes by SEM images. The contact angle measurements showed that the silane coupling treatment enhanced the hydrophobicity of the obtained materials. Then the catalytic properties of two types of modified membranes were studied in a batch process by evaluating their catalytic performance in a Knoevenagel condensation. The results indicated that the cellulose membrane grafted with many secondary amines exhibited a better catalytic activity compared to the one grafted only by primary amines. In addition, the compact structure of the modified membranes permitted their application in a pervaporation catalytic membrane reactor. Therefore, functional CM that prepared in this paper represented a promising material in the field of industrial catalysis. Copyright © 2017 Elsevier B.V. All rights reserved.

  3. Rh(III)-Catalyzed meta-C-H Olefination Directed by a Nitrile Template.

    Science.gov (United States)

    Xu, Hua-Jin; Lu, Yi; Farmer, Marcus E; Wang, Huai-Wei; Zhao, Dan; Kang, Yan-Shang; Sun, Wei-Yin; Yu, Jin-Quan

    2017-02-15

    A range of Rh(III)-catalyzed ortho-C-H functionalizations have been developed; however, extension of this reactivity to remote C-H functionalizations through large-ring rhodacyclic intermediates has yet to be demonstrated. Herein we report the first example of the use of a U-shaped nitrile template to direct Rh(III)-catalyzed remote meta-C-H activation via a postulated 12-membered macrocyclic intermediate. Because the ligands used for Rh(III) catalysts are significantly different from those of Pd(II) catalysts, this offers new opportunities for future development of ligand-promoted meta-C-H activation reactions.

  4. Catalytic activity of pyrite for coal liquefaction reaction; Tennen pyrite no shokubai seino ni kansuru kento

    Energy Technology Data Exchange (ETDEWEB)

    Hirano, K.; Kozu, M.; Okada, T.; Kobayashi, M. [Nippon Coal Oil Co. Ltd., Tokyo (Japan)

    1996-10-28

    Since natural pyrite is easy to obtain and cheap as coal liquefaction catalyst, it is to be used for the 150 t/d scale NEDOL process bituminous coal liquefaction pilot plant. NEDO and NCOL have investigated the improvement of catalytic activity of pulverized natural pyrite for enhancing performance and economy of the NEDOL process. In this study, coal liquefaction tests were conducted using natural pyrite catalyst pulverized by dry-type bowl mill under nitrogen atmosphere. Mechanism of catalytic reaction of the natural pyrite was discussed from relations between properties of the catalyst and liquefaction product. The natural pyrite provided an activity to transfer gaseous hydrogen into the liquefaction product. It was considered that pulverized pyrite promotes the hydrogenation reaction of asphaltene because pulverization increases its contact rate with reactant and the amount of active points on its surface. It was inferred that catalytic activity of pyrite is affected greatly by the chemical state of Fe and S on its surface. 3 refs., 4 figs., 1 tab.

  5. Enhanced catalytic activity of solid and hollow platinum-cobalt nanoparticles towards reduction of 4-nitrophenol

    Science.gov (United States)

    Krajczewski, Jan; Kołątaj, Karol; Kudelski, Andrzej

    2016-12-01

    Previous investigations of hollow platinum nanoparticles have shown that such nanostructures are more active catalysts than their solid counterparts towards the following electrochemical reactions: reduction of oxygen, evolution of hydrogen, and oxidation of borohydride, methanol and formic acid. In this work we show that synthesised using standard galvanic replacement reaction (with Co templates) hollow platinum nanoparticles exhibit enhanced catalytic activity also towards reduction of 4-nitrophenol by sodium borohydride in water. Unlike in the case of procedures involving hollow platinum catalysts employed so far to carry out this reaction it is not necessary to couple analysed platinum nanoparticles to the surface of an electrode. Simplification of the analyzed reaction may eliminate same experimental errors. We found that the enhanced catalytic activity of hollow Pt nanoparticles is not only connected with generally observed larger surface area of hollow nanostructures, but is also due to the contamination of formed hollow nanostructures with cobalt, from which sacrificial templates used in the synthesis of hollow Pt nanostrustures have been formed. Because using sacrificial templates is a typical method of synthesis of hollow metal nanostructures, formed hollow nanoparticles are probably often contaminated, which may significantly influence their catalytic activity.

  6. A substrate-driven allosteric switch that enhances PDI catalytic activity.

    Science.gov (United States)

    Bekendam, Roelof H; Bendapudi, Pavan K; Lin, Lin; Nag, Partha P; Pu, Jun; Kennedy, Daniel R; Feldenzer, Alexandra; Chiu, Joyce; Cook, Kristina M; Furie, Bruce; Huang, Mingdong; Hogg, Philip J; Flaumenhaft, Robert

    2016-08-30

    Protein disulfide isomerase (PDI) is an oxidoreductase essential for folding proteins in the endoplasmic reticulum. The domain structure of PDI is a-b-b'-x-a', wherein the thioredoxin-like a and a' domains mediate disulfide bond shuffling and b and b' domains are substrate binding. The b' and a' domains are connected via the x-linker, a 19-amino-acid flexible peptide. Here we identify a class of compounds, termed bepristats, that target the substrate-binding pocket of b'. Bepristats reversibly block substrate binding and inhibit platelet aggregation and thrombus formation in vivo. Ligation of the substrate-binding pocket by bepristats paradoxically enhances catalytic activity of a and a' by displacing the x-linker, which acts as an allosteric switch to augment reductase activity in the catalytic domains. This substrate-driven allosteric switch is also activated by peptides and proteins and is present in other thiol isomerases. Our results demonstrate a mechanism whereby binding of a substrate to thiol isomerases enhances catalytic activity of remote domains.

  7. Allosteric Activation of Trypanosomatid Deoxyhypusine Synthase by a Catalytically Dead Paralog*♦

    Science.gov (United States)

    Nguyen, Suong; Jones, Deuan C.; Wyllie, Susan; Fairlamb, Alan H.; Phillips, Margaret A.

    2013-01-01

    Polyamine biosynthesis is a key drug target in African trypanosomes. The “resurrection drug” eflornithine (difluoromethylornithine), which is used clinically to treat human African trypanosomiasis, inhibits the first step in polyamine (spermidine) biosynthesis, a highly regulated pathway in most eukaryotic cells. Previously, we showed that activity of a key trypanosomatid spermidine biosynthetic enzyme, S-adenosylmethionine decarboxylase, is regulated by heterodimer formation with a catalytically dead paralog (a prozyme). Here, we describe an expansion of this prozyme paradigm to the enzyme deoxyhypusine synthase, which is required for spermidine-dependent hypusine modification of a lysine residue in the essential translation factor eIF5A. Trypanosoma brucei encodes two deoxyhypusine synthase paralogs, one that is catalytically functional but grossly impaired, and the other is inactive. Co-expression in Escherichia coli results in heterotetramer formation with a 3000-fold increase in enzyme activity. This functional complex is also present in T. brucei, and conditional knock-out studies indicate that both DHS genes are essential for in vitro growth and infectivity in mice. The recurrent evolution of paralogous, catalytically dead enzyme-based activating mechanisms may be a consequence of the unusual gene expression in the parasites, which lack transcriptional regulation. Our results suggest that this mechanism may be more widely used by trypanosomatids to control enzyme activity and ultimately influence pathogenesis than currently appreciated. PMID:23525104

  8. [Mechanism of catalytic ozonation for the degradation of paracetamol by activated carbon].

    Science.gov (United States)

    Wang, Jia-Yu; Dai, Qi-Zhou; Yu, Jie; Yan, Yi-Zhou; Chen, Jian-Meng

    2013-04-01

    The degradation of paracetamol (APAP) in aqueous solution was studied with ozonation integrated with activated carbon (AC). The synergistic effect of ozonation/AC process was explored by comparing the degradation efficiency of APAP in three processes (ozonation alone, activated carbon alone and ozonation integrated with activated carbon). The operational parameters that affected the reaction rate were carefully optimized. Based on the intermediates detected, the possible pathway for catalytic degradation was discussed and the reaction mechanism was also investigated. The results showed that the TOC removal reached 55.11% at 60 min in the AC/O3 system, and was significantly better than the sum of ozonation alone (20.22%) and activated carbon alone (27.39%), showing the great synergistic effect. And the BOD5/COD ratio increased from 0.086 (before reaction) to 0.543 (after reaction), indicating that the biodegradability was also greatly improved. The effects of the initial concentration of APAP, pH value, ozone dosage and AC dosage on the variation of reaction rate were carefully discussed. The catalytic reaction mechanism was different at different pH values: the organic pollutions were removed by adsorption and direct ozone oxidation at acidic pH, and mainly by catalytic ozonation at alkaline pH.

  9. Chaperones are necessary for the expression of catalytically active potato apyrases in prokaryotic cells.

    Science.gov (United States)

    Porowińska, Dorota; Czarnecka, Joanna; Komoszyński, Michał

    2014-07-01

    NTPDases (nucleoside triphosphate diphosphohydrolases) (also called in plants apyrases) hydrolyze nucleoside 5'-tri- and/or diphosphate bonds producing nucleosides di or monophosphate and inorganic phosphate. For years, studies have been carried out to use both plant and animal enzymes for medicine. Therefore, there is a need to develop an efficient method for the quick production of large amounts of homogeneous proteins with high catalytic activity. Expression of proteins in prokaryotic cells is the most common way for the protein production. The aim of our study was to develop a method of expression of potato apyrase (StAPY4, 5, and 6) genes in bacterial cells under conditions that allowed the production of catalytically active form of these enzymes. Apyrase 4 and 6 were overexpressed in BL21-CodonPlus (DE3) bacteria strain but they were accumulated in inclusion bodies, regardless of the culture conditions and induction method. Co-expression of potato apyrases with molecular chaperones allowed the expression of catalytically active apyrase 5. However, its high nucleotidase activity could be toxic for bacteria and is therefore synthesized in small amounts in cells. Our studies show that each protein requires other conditions for maturation and even small differences in amino acid sequence can essentially affect protein folding regardless of presence of chaperones.

  10. Understanding the catalytic activity of nanoporous gold: Role of twinning in fcc lattice

    Science.gov (United States)

    Krajčí, Marian; Kameoka, Satoshi; Tsai, An-Pang

    2017-07-01

    Nanoporous gold (NPG) prepared by de-alloying Al2Au exhibits correlation between the high catalytic reactivity towards CO oxidation and the density of twinning defects in the fcc lattice of NPG. It was also discovered that on the internal surface of NPG, quite common twinning defects can create close-packed rows of six-coordinated catalytically active Au atoms denoted as W-chains. In this work, using density functional theory methods, we investigate energy conditions for formation, thermal stability, and chemical reactivity of these active sites. The possibility of dioxygen chemisorption on various surface sites is studied in detail. A contribution from the dispersion interactions is also considered. The calculated surface density of the active six-coordinated atoms in NPG comparable with that of supported gold nanoparticle catalysts, exothermic chemisorption of dioxygen, and the energy profiles of reaction pathways for CO oxidation indicate that the six-coordinated sites created by twinning can significantly contribute to the catalytic activity of NPG.

  11. Design, synthesis and characterization of a Pt-Gd metal-organic framework containing potentially catalytically active sites.

    Science.gov (United States)

    Szeto, Kai C; Kongshaug, Kjell Ove; Jakobsen, Søren; Tilset, Mats; Lillerud, Karl Petter

    2008-04-21

    The heterobimetallic metal-organic framework {[(BPDC)PtCl(2)](3)(Gd(H(2)O)(3))(2)}.5H(2)O (BPDC = 2,2'-bipyridine-5,5'-dicarboxylate) has been designed and synthesized by hydrothermal methods. The new coordination polymer contains subunits of (BPDC)PtCl(2) (1) where both N atoms of the BPDC ligand are attached to a square-planar Pt(II) center. The two remaining cis coordination sites at Pt(II) are occupied by chloride ions. The final structure (2) of the polymeric network is obtained when Gd(III) ions link together the (BPDC)PtCl(2) units, which are organized in sheets, into larger blocks. These blocks are stacked along the crystallographic [010] direction and are held together by a hydrogen bonding scheme that involves carboxylate oxygen atoms and water molecules in the coordination sphere of Gd. The coordination polymer 2 can be obtained in a single-step reaction or in a two-step synthesis where the corresponding Pt complex (1) was first synthesized followed by reacting 1 with Gd(NO(3))(3).6H(2)O. In situ high temperature powder X-ray diffraction shows that the crystalline coordination polymer transforms into an anhydrous modification at 100 degrees C. This modification is stable to 350 degrees C, at which temperature the structure starts to decompose. The coordination sphere around platinum in the polymer closely resembles organometallic Pt complexes that have been previously found to catalytically or stoichiometrically activate and functionalize hydrocarbon C-H bonds in homogeneous systems.

  12. High catalytic activity of anatase titanium dioxide for decomposition of electrolyte solution in lithium ion battery

    Science.gov (United States)

    Liu, Ming; He, Yan-Bing; Lv, Wei; Zhang, Chen; Du, Hongda; Li, Baohua; Yang, Quan-Hong; Kang, Feiyu

    2014-12-01

    It has been indicated that anatase TiO2 is a promising anode material for lithium ion power battery from many previous researches. Whereas, in this work, we find that the anatase TiO2, when used as an anode for lithium ion battery, has high catalytic activity to initiate the decarboxylation reaction of electrolyte solution, resulting in the large generation of sole gaseous component, CO2. The ROLi species and the new phase of flake-like Li2TiF6 material are the main reaction products between anatase TiO2 and LiPF6 based electrolyte solution. This work provides important and urgent information that the surface chemistry of anatase TiO2 used as the anode material of lithium ion battery must be modified to suppress its catalytic activity for the decomposition of solvents.

  13. An improved d-band model of the catalytic activity of magnetic transition metal surfaces

    CERN Document Server

    Bhattacharjee, Satadeep; Lee, S C

    2016-01-01

    The d-band center model of Hammer and N{\\o}rskov is widely used in understanding and predicting catalytic activity on transition metal (TM) surfaces. Here, we demonstrate that this model is inadequate for capturing the complete catalytic activity of the magnetically polarized TM surfaces and propose its generalization. We validate the generalized model through comparison of adsorption energies of the NH$_3$ molecule on the surfaces of 3d TMs (V, Cr, Mn, Fe, Co, Ni, Cu and Zn) determined with spin-polarized density functional theory (DFT)-based methods with the predictions of our model. Compared to the conventional d-band model, where the nature of the metal-adsorbate interaction is entirely determined through the energy and the occupation of the d-band center, we emphasize that for the surfaces with high spin polarization, the metal-adsorbate system can be stabilized through a competition of the spin-dependent metal-adsorbate interactions.

  14. Twinning in fcc lattice creates low-coordinated catalytically active sites in porous gold.

    Science.gov (United States)

    Krajčí, Marian; Kameoka, Satoshi; Tsai, An-Pang

    2016-08-28

    We describe a new mechanism for creation of catalytically active sites in porous gold. Samples of porous gold prepared by de-alloying Al2Au exhibit a clear correlation between the catalytic reactivity towards CO oxidation and structural defects in the fcc lattice of Au. We have found that on the stepped {211} surfaces quite common twin boundary defects in the bulk structure of porous gold can form long close-packed rows of atoms with the coordination number CN = 6. DFT calculations confirm that on these low-coordinated Au sites dioxygen chemisorbs and CO oxidation can proceed via the Langmuir-Hinshelwood mechanism with the activation energy of 37 kJ/mol or via the CO-OO intermediate with the energy barrier of 19 kJ/mol. The existence of the twins in porous gold is stabilized by the surface energy.

  15. ALD Functionalized Nanoporous Gold: Thermal Stability, Mechanical Properties, and Catalytic Activity

    Energy Technology Data Exchange (ETDEWEB)

    Biener, M M; Biener, J; Wichmann, A; Wittstock, A; Baumann, T F; Baeumer, M; Hamza, A V

    2011-03-24

    Nanoporous metals have many technologically promising applications but their tendency to coarsen limits their long-term stability and excludes high temperature applications. Here, we demonstrate that atomic layer deposition (ALD) can be used to stabilize and functionalize nanoporous metals. Specifically, we studied the effect of nanometer-thick alumina and titania ALD films on thermal stability, mechanical properties, and catalytic activity of nanoporous gold (np-Au). Our results demonstrate that even only one-nm-thick oxide films can stabilize the nanoscale morphology of np-Au up to 1000 C, while simultaneously making the material stronger and stiffer. The catalytic activity of np-Au can be drastically increased by TiO{sub 2} ALD coatings. Our results open the door to high temperature sensor, actuator, and catalysis applications and functionalized electrodes for energy storage and harvesting applications.

  16. Synthesis and Catalytic Activity of Copper(Ⅱ) Resorcylic Acid Nanoparticles

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Copper(Ⅱ) resorcylic acid(CuRes) nanoparticles were synthesized by using reactive precipitation method with resorcylic acid and blue copperas as the raw material in a rotating packed bed. The sample obtained was characterized by using X-ray diffraction( XRD), transmission electron microscopy( TEM ), Fourier transform infrared spectroscopy (FTIR), thermo-gravimetric analyses (TG), and element analysis. In addition, the catalytic activity of CuRes nanoparticles on the thermal decomposition of nitrocellulose-nitroglycerine (NC-NG) was also determined via DSC.The results show that the spherical nanoparticles with a diameter of 20 nm were obtained in ethanol solution. The peak temperature of the thermal decomposition of NC-NG-CuRes decreases by 3 ℃ compared with that of normal CuRes,and the decomposition enthalpy is increased by 735 J/g, and therefore, it is reasonable to assume that CuRes nanoparticles have a better catalytic activity.

  17. Gold Incorporated Mesoporous Silica Thin Film Model Surface as a Robust SERS and Catalytically Active Substrate

    Directory of Open Access Journals (Sweden)

    Anandakumari Chandrasekharan Sunil Sekhar

    2016-05-01

    Full Text Available Ultra-small gold nanoparticles incorporated in mesoporous silica thin films with accessible pore channels perpendicular to the substrate are prepared by a modified sol-gel method. The simple and easy spin coating technique is applied here to make homogeneous thin films. The surface characterization using FESEM shows crack-free films with a perpendicular pore arrangement. The applicability of these thin films as catalysts as well as a robust SERS active substrate for model catalysis study is tested. Compared to bare silica film our gold incorporated silica, GSM-23F gave an enhancement factor of 103 for RhB with a laser source 633 nm. The reduction reaction of p-nitrophenol with sodium borohydride from our thin films shows a decrease in peak intensity corresponding to –NO2 group as time proceeds, confirming the catalytic activity. Such model surfaces can potentially bridge the material gap between a real catalytic system and surface science studies.

  18. Peroxidase-like catalytic activity of Ag3PO4 nanocrystals prepared by a colloidal route.

    Directory of Open Access Journals (Sweden)

    Yuanjun Liu

    Full Text Available Nearly monodispersed Ag3PO4 nanocrystals with size of 10 nm were prepared through a colloidal chemical route. It was proven that the synthesized Ag3PO4 nanoparticles have intrinsic peroxidase-like catalytic activity. They can quickly catalyze oxidation of the peroxidase substrate 3, 3, 5, 5-tetramethylbenzidine (TMB in the presence of H2O2, producing a blue color. The catalysis reaction follows Michaelis-Menten kinetics. The calculated kinetic parameters indicate a high catalytic activity and the strong affinity of Ag3PO4 nanocrystals to the substrate (TMB. These results suggest the potential applications of Ag3PO4 nanocrystals in fields such as biotechnology, environmental chemistry, and medicine.

  19. Characterization and catalytic activity of gold nanoparticles synthesized using ayurvedic arishtams.

    Science.gov (United States)

    Aromal, S Aswathy; Babu, K V Dinesh; Philip, Daizy

    2012-10-01

    The development of new synthesis methods for monodispersed nanocrystals using cheap and nontoxic chemicals, environmentally benign solvents and renewable materials remains a challenge to the scientific community. The present work reports a new green method for the synthesis of gold nanoparticles. Four different ayurvedic arishtams are used for the reduction of Au(3+) to Au nanoparticles. This method is simple, efficient, economic and nontoxic. Gold nanoparticles having different sizes in the range from 15 to 23 nm could be obtained. The nanoparticles have been characterized by UV-Visible spectroscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD) and FTIR analysis. The high crystallinity of nanoparticles is evident from bright circular spots in the SAED pattern and peaks in the XRD pattern. The synthesized gold nanoparticles show good catalytic activity for the reduction of 4-nitrophenol to 4-aminophenol by excess NaBH(4). The synthesized nanoparticles are found to exhibit size dependent catalytic property, the smaller nanoparticles showing faster activity.

  20. Catalytic layer for oxygen activation on ionic solid electrolytes at high temperature

    OpenAIRE

    Serra Alfaro, José Manuel; Vert Belenguer, Vicente Bernard; Escolástico Rozalén, Sonia

    2008-01-01

    The present invention relates to a catalytic porous layer for oxygen activation which may be utilised in solid oxide fuel cells (SOFCs) and in dense ceramic membranes for oxygen separation at high temperature. Said porous layer is principally formed by a mixed electron and oxygen ion conductive material possessing a structure selected from among structures of the simple perovskite or double perovskite type or structures related to perovskite, that is to say: structures of the Ruddlesden-Poppe...

  1. Molecular dynamics simulation and conformational analysis of some catalytically active peptides.

    Science.gov (United States)

    Honarparvar, Bahareh; Skelton, Adam A

    2015-04-01

    The design of stable and inexpensive artificial enzymes with potent catalytic activity is a growing field in peptide science. The first step in this design process is to understand the key factors that can affect the conformational preference of an enzyme and correlate them with its catalytic activity. In this work, molecular dynamics simulations in explicit water of two catalytically active peptides (peptide 1: Fmoc-Phe1-Phe2-His-CONH2; peptide 2: Fmoc-Phe1-Phe2-Arg-CONH2) were performed at temperatures of 300, 400, and 500 K. Conformational analysis of these peptides using Ramachandran plots identified the secondary structures of the amino acid residues involved (Phe1, Phe2, His, Arg) and confirmed their conformational flexibility in solution. Furthermore, Ramachandran maps revealed the intrinsic preference of the constituent residues of these compounds for a helical conformation. Long-range interaction distances and radius of gyration (R g) values obtained during 20 ns MD simulations confirmed their tendency to form folded conformations. Results showed a decrease in side-chain (Phe1, Phe2, His ring, and Arg) contacts as the temperature was raised from 300 to 400 K and then to 500 K. Finally, the radial distribution functions (RDF) of the water molecules around the nitrogen atoms in the catalytically active His and Arg residues of peptide 1 and peptide 2 revealed that the strongest water-peptide interaction occurred with the arginine nitrogen atoms in peptide 2. Our results highlight differences in the secondary structures of the two peptides that can be explained by the different arrangement of water molecules around the nitrogen atoms of Arg in peptide 2 as compared to the arrangement of water molecules around the nitrogen atoms of His in peptide 1. The results of this work thus provide detailed insight into peptide conformations which can be exploited in the future design of peptide analogs.

  2. A simple red-ox titrimetric method for the evaluation of photo-catalytic activity of titania based catalysts

    Indian Academy of Sciences (India)

    Y S Satpute; S A Borkar; S R Dharwadkar

    2003-12-01

    A simple red-ox titrimetry method has been developed for rapid evaluation of the photo catalytic activity of TiO2 based photo-catalysts. The analytical procedure employs monitoring the kinetics of a simple one electron transfer reduction reaction of conversion of Ce4+ to Ce3+ in dilute aqueous solution in presence of sunlight. The photo-catalytic activity of TiO2 synthesized by two different routes was evaluated by the above technique. The effect of surface area, crystallite size and polymorphic contents on the photo-catalytic activity of TiO2 was also studied employing this method.

  3. A microreactor array for spatially resolved measurement of catalytic activity for high-throughput catalysis science

    Energy Technology Data Exchange (ETDEWEB)

    Kondratyuk, Petro; Gumuslu, Gamze; Shukla, Shantanu; Miller, James B; Morreale, Bryan D; Gellman, Andrew J

    2013-04-01

    We describe a 100 channel microreactor array capable of spatially resolved measurement of catalytic activity across the surface of a flat substrate. When used in conjunction with a composition spread alloy film (CSAF, e.g. Pd{sub x}Cu{sub y}Au{sub 1-x-y}) across which component concentrations vary smoothly, such measurements permit high-throughput analysis of catalytic activity and selectivity as a function of catalyst composition. In the reported implementation, the system achieves spatial resolution of 1 mm{sup 2} over a 10×10 mm{sup 2} area. During operation, the reactant gases are delivered at constant flow rate to 100 points of differing composition on the CSAF surface by means of a 100-channel microfluidic device. After coming into contact with the CSAF catalyst surface, the product gas mixture from each of the 100 points is withdrawn separately through a set of 100 isolated channels for analysis using a mass spectrometer. We demonstrate the operation of the device on a Pd{sub x}Cu{sub y}Au{sub 1-x-y} CSAF catalyzing the H{sub 2}-D{sub 2} exchange reaction at 333 K. In essentially a single experiment, we measured the catalytic activity over a broad swathe of concentrations from the ternary composition space of the Pd{sub x}Cu{sub y}Au{sub 1-x-y} alloy.

  4. Direct Single-Enzyme Biomineralization of Catalytically Active Ceria and Ceria–Zirconia Nanocrystals

    Energy Technology Data Exchange (ETDEWEB)

    Curran, Christopher D.; Lu, Li; Jia, Yue; Kiely, Christopher J.; Berger, Bryan W.; McIntosh, Steven

    2017-02-21

    Biomineralization is an intriguing approach to the synthesis of functional inorganic materials for energy applications whereby biological systems are engineered to mineralize inorganic materials and control their structure over multiple length scales under mild reaction conditions. Herein we demonstrate a single-enzyme-mediated biomineralization route to synthesize crystalline, catalytically active, quantum-confined ceria (CeO2–x) and ceria–zirconia (Ce1–yZryO2–x) nanocrystals for application as environmental catalysts. In contrast to typical anthropogenic synthesis routes, the crystalline oxide nanoparticles are formed at room temperature from an otherwise inert aqueous solution without the addition of a precipitant or additional reactant. An engineered form of silicatein, rCeSi, as a single enzyme not only catalyzes the direct biomineralization of the nanocrystalline oxides but also serves as a templating agent to control their morphological structure. The biomineralized nanocrystals of less than 3 nm in diameter are catalytically active toward carbon monoxide oxidation following an oxidative annealing step to remove carbonaceous residue. The introduction of zirconia into the nanocrystals leads to an increase in Ce(III) concentration, associated catalytic activity, and the thermal stability of the nanocrystals.

  5. Direct Visualization of Catalytically Active Sites at the FeO-Pt(111) Interface

    Energy Technology Data Exchange (ETDEWEB)

    Kudernatsch, Wilhelmine; Peng, Guowen; Zeuthen, Helene; Bai, Yunhai; Merte, L. R.; Lammich, Lutz; Besenbacher, Fleming; Mavrikakis, Manos; Wendt, Stefen

    2015-08-25

    Within the area of surface science, one of the “holy grails” is to directly visualize a chemical reaction at the atomic scale. Whereas this goal has been reached by high-resolution scanning tunneling microscopy (STM) in a number of cases for reactions occurring at flat surfaces, such a direct view is often inhibited for reaction occurring at steps and interfaces. Here we have studied the CO oxidation reaction at the interface between ultrathin FeO islands and a Pt(111) support by in situ STM and density functional theory (DFT) calculations. Time-lapsed STM imaging on this inverse model catalyst in O2 and CO environments revealed catalytic activity occurring at the FeO-Pt(111) interface and directly showed that the Fe-edges host the catalytically most active sites for the CO oxidation reaction. This is an important result since previous evidence for the catalytic activity of the FeO-Pt(111) interface is essentially based on averaging techniques in conjunction with DFT calculations. The presented STM results are in accord with DFTþU calculations, in which we compare possible CO oxidation pathways on oxidized Fe-edges and O-edges. We found that the CO oxidation reaction is more favorable on the oxidized Fe-edges, both thermodynamically and kinetically.

  6. Direct Visualization of Catalytically Active Sites at the FeO-Pt(111) Interface.

    Science.gov (United States)

    Kudernatsch, Wilhelmine; Peng, Guowen; Zeuthen, Helene; Bai, Yunhai; Merte, Lindsay R; Lammich, Lutz; Besenbacher, Flemming; Mavrikakis, Manos; Wendt, Stefan

    2015-08-25

    Within the area of surface science, one of the "holy grails" is to directly visualize a chemical reaction at the atomic scale. Whereas this goal has been reached by high-resolution scanning tunneling microscopy (STM) in a number of cases for reactions occurring at flat surfaces, such a direct view is often inhibited for reaction occurring at steps and interfaces. Here we have studied the CO oxidation reaction at the interface between ultrathin FeO islands and a Pt(111) support by in situ STM and density functional theory (DFT) calculations. Time-lapsed STM imaging on this inverse model catalyst in O2 and CO environments revealed catalytic activity occurring at the FeO-Pt(111) interface and directly showed that the Fe-edges host the catalytically most active sites for the CO oxidation reaction. This is an important result since previous evidence for the catalytic activity of the FeO-Pt(111) interface is essentially based on averaging techniques in conjunction with DFT calculations. The presented STM results are in accord with DFT+U calculations, in which we compare possible CO oxidation pathways on oxidized Fe-edges and O-edges. We found that the CO oxidation reaction is more favorable on the oxidized Fe-edges, both thermodynamically and kinetically.

  7. Supercritical CO{sub 2} mediated synthesis and catalytic activity of graphene/Pd nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Tang, Lulu [School of Chemical Engineering, Yeungnam University, Gyeongsan, Gyeoungbuk 712-749 (Korea, Republic of); Nguyen, Van Hoa [School of Chemical Engineering, Yeungnam University, Gyeongsan, Gyeoungbuk 712-749 (Korea, Republic of); Department of Chemistry, Nha Trang University, 2 Nguyen Dinh Chieu, Nha Trang (Viet Nam); Shim, Jae-Jin, E-mail: jjshim@yu.ac.kr [School of Chemical Engineering, Yeungnam University, Gyeongsan, Gyeoungbuk 712-749 (Korea, Republic of)

    2015-11-15

    Highlights: • RGO/Pd composite was efficiently prepared via a facile method in supercritical CO{sub 2}. • Graphene sheets were coated uniformly with Pd nanoparticles with a size of ∼8 nm. • Composites exhibited excellent catalytic activity in the Suzuki reaction even after 10 cycles. - Abstract: Graphene sheets were decorated with palladium nanoparticles using a facile and efficient method in supercritical CO{sub 2}. The nanoparticles were formed on the graphene sheets by the simple hydrogen reduction of palladium(II) hexafluoroacetylacetonate precursor in supercritical CO{sub 2}. The product was characterized by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy. Highly dispersed nanoparticles with various sizes and shapes adhered well to the graphene sheets. The composites showed high catalytic activities for the Suzuki reaction under aqueous and aerobic conditions within 5 min. The effects of the different Pd precursor loadings on the catalytic activities of the composites were also examined.

  8. Probing the electrostatics of active site microenvironments along the catalytic cycle for Escherichia coli dihydrofolate reductase.

    Science.gov (United States)

    Liu, C Tony; Layfield, Joshua P; Stewart, Robert J; French, Jarrod B; Hanoian, Philip; Asbury, John B; Hammes-Schiffer, Sharon; Benkovic, Stephen J

    2014-07-23

    Electrostatic interactions play an important role in enzyme catalysis by guiding ligand binding and facilitating chemical reactions. These electrostatic interactions are modulated by conformational changes occurring over the catalytic cycle. Herein, the changes in active site electrostatic microenvironments are examined for all enzyme complexes along the catalytic cycle of Escherichia coli dihydrofolate reductase (ecDHFR) by incorporation of thiocyanate probes at two site-specific locations in the active site. The electrostatics and degree of hydration of the microenvironments surrounding the probes are investigated with spectroscopic techniques and mixed quantum mechanical/molecular mechanical (QM/MM) calculations. Changes in the electrostatic microenvironments along the catalytic environment lead to different nitrile (CN) vibrational stretching frequencies and (13)C NMR chemical shifts. These environmental changes arise from protein conformational rearrangements during catalysis. The QM/MM calculations reproduce the experimentally measured vibrational frequency shifts of the thiocyanate probes across the catalyzed hydride transfer step, which spans the closed and occluded conformations of the enzyme. Analysis of the molecular dynamics trajectories provides insight into the conformational changes occurring between these two states and the resulting changes in classical electrostatics and specific hydrogen-bonding interactions. The electric fields along the CN axes of the probes are decomposed into contributions from specific residues, ligands, and solvent molecules that make up the microenvironments around the probes. Moreover, calculation of the electric field along the hydride donor-acceptor axis, along with decomposition of this field into specific contributions, indicates that the cofactor and substrate, as well as the enzyme, impose a substantial electric field that facilitates hydride transfer. Overall, experimental and theoretical data provide evidence for

  9. Catalytic activity of copper (II) oxide prepared via ultrasound assisted Fenton-like reaction.

    Science.gov (United States)

    Angı, Arzu; Sanlı, Deniz; Erkey, Can; Birer, Özgür

    2014-03-01

    Copper (II) oxide nanoparticles were synthesized in an ultrasound assisted Fenton-like aqueous reaction between copper (II) cations and hydrogen peroxide. The reactions were initiated with the degradation of hydrogen peroxide by ultrasound induced cavitations at 0 °C or 5 °C and subsequent generation of the OH radical. The radical was converted into hydroxide anion in Fenton-like reactions and copper hydroxides were readily converted to oxides without the need of post annealing or aging of the samples. The products were characterized with X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and Brunauer-Emmett-Teller (BET) surface area analysis. Catalytic activity of the nanoparticles for the hydrogen peroxide assisted degradation of polycyclic aromatic hydrocarbons in the dark was tested by UV-visible spectroscopy with methylene blue as the model compound. The rate of the reaction was first order, however the rate constants changed after the initial hour. Initial rate constants as high as 0.030 min(-1) were associated with the high values of surface area, i.e. 70 m(2)/g. Annealing of the products at 150 °C under vacuum resulted in the decrease of the catalytic activity, underlying the significance of the cavitation induced surface defects in the catalytic process.

  10. Co-Cu Nanoparticles: Synthesis by Galvanic Replacement and Phase Rearrangement during Catalytic Activation.

    Science.gov (United States)

    Nafria, Raquel; Genç, Aziz; Ibáñez, Maria; Arbiol, Jordi; de la Piscina, Pilar Ramírez; Homs, Narcís; Cabot, Andreu

    2016-03-08

    The control of the phase distribution in multicomponent nanomaterials is critical to optimize their catalytic performance. In this direction, while impressive advances have been achieved in the past decade in the synthesis of multicomponent nanoparticles and nanocomposites, element rearrangement during catalyst activation has been frequently overseen. Here, we present a facile galvanic replacement-based procedure to synthesize Co@Cu nanoparticles with narrow size and composition distributions. We further characterize their phase arrangement before and after catalytic activation. When oxidized at 350 °C in air to remove organics, Co@Cu core-shell nanostructures oxidize to polycrystalline CuO-Co3O4 nanoparticles with randomly distributed CuO and Co3O4 crystallites. During a posterior reduction treatment in H2 atmosphere, Cu precipitates in a metallic core and Co migrates to the nanoparticle surface to form Cu@Co core-shell nanostructures. The catalytic behavior of such Cu@Co nanoparticles supported on mesoporous silica was further analyzed toward CO2 hydrogenation in real working conditions.

  11. Facile and green synthesis of cellulose nanocrystal-supported gold nanoparticles with superior catalytic activity.

    Science.gov (United States)

    Yan, Wei; Chen, Chang; Wang, Ling; Zhang, Dan; Li, Ai-Jun; Yao, Zheng; Shi, Li-Yi

    2016-04-20

    The emphasis of science and technology shifts toward environmentally friendly and sustainable resources and processes. Herein, we report a facile, one-pot and green synthesis of biomaterial-supported gold nanoparticles (AuNPs) with superior catalytic activity. Cellulose nanocrystal (CNC)-supported AuNPs were prepared by heating the aqueous mixture of HAuCl4, CNCs and polyethylene glycol, avoiding toxic chemicals, extreme condition and complicated procedure. The resultant CNC-supported AuNPs exhibited catalytic activities for the reduction of 4-nitrophenol by sodium borohydride. The maximum apparent rate constant reached 1.47×10(-2)s(-1), and the turnover frequency reached 641h(-1). The superior catalytic performance can be ascribed to the large amount of highly dispersed AuNPs with few nanometers in size which are loaded on CNCs. About 90% of the AuNPs are smaller than 10nm, and nearly 60% of the AuNPs are smaller than 5nm. The synthesis is eco-friendly, facile and low-cost, thus has great potential for industrial and medical applications.

  12. Introduction of a catalytic triad increases the glutathione peroxidase-like activity of diaryl diselenides.

    Science.gov (United States)

    Bhowmick, Debasish; Mugesh, Govindasamy

    2015-09-14

    Reactive oxygen species (ROS)-mediated diseased states are of major concern in modern day life. Under oxidative stress conditions, the cellular antioxidants deplete, leading to several biological disorders. Small molecule mimics of different antioxidant enzymes are found to be useful in supplementing the biological systems to detoxify ROS. In this study, we have synthesized a series of amine or amide-based diselenides containing an additional amino group as glutathione peroxidase (GPx) mimetics. These diselenides act as a catalytic triad model of the native GPx featuring two basic amino groups near the selenium centre. A comparison of the catalytic activities reveals that the additional amino group increases the activity significantly in the presence of aromatic thiols. Deprotonation of thiol by an additional amine either stabilizes the selenolate intermediate or facilitates the nucleophilic attack of thiol in other intermediates. The (77)Se NMR experiments and DFT calculations show that the amino group does not have any significant effect on the catalytic intermediates. Although the amino moiety increases the nucleophilicity of the thiol, it does not prevent the thiol exchange reactions that take place in the selenenyl sulfide intermediates.

  13. Tough and catalytically active hybrid biofibers wet-spun from nanochitin hydrogels.

    Science.gov (United States)

    Das, Paramita; Heuser, Thomas; Wolf, Andrea; Zhu, Baolei; Demco, Dan Eugen; Ifuku, Shinsuke; Walther, Andreas

    2012-12-10

    Sustainable alternatives for high-performance and functional materials based on renewable resources are intensely needed as future alternatives for present-day, fossil-based materials. Nanochitin represents an emerging class of highly crystalline bionanoparticles with high intrinsic mechanical properties and the ability for conjugation into functional materials owing to reactive amine and hydroxyl groups. Herein we demonstrate that hydrogels containing surface-deacetylated chitin nanofibrils of micrometer length and average diameters of 9 nm, as imaged by cryogenic transmission electron microscopy, can be wet-spun into macrofibers via extrusion in a coagulation bath, a simple low energy and large-scale processing route. The resulting biofibers display attractive mechanical properties with a large plastic region of about 12% in strain, in which frictional sliding of nanofibrils allows dissipation of fracture energy and enables a high work-of-fracture of near 10 MJ/m3. We further show how to add functionality to these macrofibers by exploiting the amine functions of the surface chitosan groups to host catalytically active noble metal nanoparticles, furnishing biobased, renewable catalytic hybrids. These inorganic/organic macrofibers can be used repeatedly for fast catalytic reductions of model compounds without loss of activity, rendering the concept of hybridized chitin materials interesting as novel bioderived supports for nanoparticle catalysts.

  14. Novel class of glutathione transferases from cyanobacteria exhibit high catalytic activities towards naturally occurring isothiocyanates

    Science.gov (United States)

    Wiktelius, Eric; Stenberg, Gun

    2007-01-01

    In the present paper, we report a novel class of GSTs (glutathione transferases), called the Chi class, originating from cyanobacteria and with properties not observed previously in prokaryotic enzymes. GSTs constitute a widespread multifunctional group of proteins, of which mammalian enzymes are the best characterized. Although GSTs have their origin in prokaryotes, few bacterial representatives have been characterized in detail, and the catalytic activities and substrate specificities observed have generally been very modest. The few well-studied bacterial GSTs have largely unknown physiological functions. Genome databases reveal that cyanobacteria have an extensive arsenal of glutathione-associated proteins. We have studied two cyanobacterial GSTs which are the first examples of bacterial enzymes that are as catalytically efficient as the best mammalian enzymes. GSTs from the thermophile Thermosynechococcus elongatus BP-1 and from Synechococcus elongatus PCC 6301 were found to catalyse the conjugation of naturally occurring plant-derived isothiocyanates to glutathione at high rates. The cyanobacterial GSTs studied are smaller than previously described members of this enzyme family, but display many of the typical structural features that are characteristics of GSTs. They are also active towards several classical substrates, but at the same moderate rates that have been observed for other GSTs derived from prokaryotes. The cloning, expression and characterization of two cyanobacterial GSTs are described. The possible significance of the observed catalytic properties is discussed in the context of physiological relevance and GST evolution. PMID:17484723

  15. The non-catalytic domains of Drosophila katanin regulate its abundance and microtubule-disassembly activity.

    Directory of Open Access Journals (Sweden)

    Kyle D Grode

    Full Text Available Microtubule severing is a biochemical reaction that generates an internal break in a microtubule and regulation of microtubule severing is critical for cellular processes such as ciliogenesis, morphogenesis, and meiosis and mitosis. Katanin is a conserved heterodimeric ATPase that severs and disassembles microtubules, but the molecular determinants for regulation of microtubule severing by katanin remain poorly defined. Here we show that the non-catalytic domains of Drosophila katanin regulate its abundance and activity in living cells. Our data indicate that the microtubule-interacting and trafficking (MIT domain and adjacent linker region of the Drosophila katanin catalytic subunit Kat60 cooperate to regulate microtubule severing in two distinct ways. First, the MIT domain and linker region of Kat60 decrease its abundance by enhancing its proteasome-dependent degradation. The Drosophila katanin regulatory subunit Kat80, which is required to stabilize Kat60 in cells, conversely reduces the proteasome-dependent degradation of Kat60. Second, the MIT domain and linker region of Kat60 augment its microtubule-disassembly activity by enhancing its association with microtubules. On the basis of our data, we propose that the non-catalytic domains of Drosophila katanin serve as the principal sites of integration of regulatory inputs, thereby controlling its ability to sever and disassemble microtubules.

  16. Structural, optical and photo-catalytic activity of nanocrystalline NiO thin films

    Energy Technology Data Exchange (ETDEWEB)

    Al-Ghamdi, Attieh A. [Center of Nanotechnology, King Abdulaziz University, Jeddah (Saudi Arabia); Abdel-wahab, M. Sh., E-mail: mshabaan90@yahoo.com [Center of Nanotechnology, King Abdulaziz University, Jeddah (Saudi Arabia); Materials Science and Nanotechnology Department, Faculty of Postgraduate Studies for Advanced Sciences, Beni-Suef University, Beni-Suef (Egypt); Farghali, A.A. [Materials Science and Nanotechnology Department, Faculty of Postgraduate Studies for Advanced Sciences, Beni-Suef University, Beni-Suef (Egypt); Chemistry Department, Faculty of Science, Beni-Suef University, Beni-Suef (Egypt); Hasan, P.M.Z. [Center of Nanotechnology, King Abdulaziz University, Jeddah (Saudi Arabia)

    2016-03-15

    Highlights: • Synthesis of nanocrystalline NiO thin films with different thicknesses using DC magnetron sputtering technique. • Effect of film thickness and particle size on photo-catalytic degradation of methyl green dye under UV light was studied. • The deposited NiO thin films are efficient, stable and possess high photo-catalytic activity upon reuse. - Abstract: Physical deposition of nanocrystalline nickel oxide (NiO) thin films with different thickness 30, 50 and 80 nm have been done on glass substrate by DC magnetron sputtering technique and varying the deposition time from 600, 900 to 1200 s. The results of surface morphology and optical characterization of these films obtained using different characterization techniques such as X-ray diffraction (XRD), field emission scanning electron microscope (FESEM), photoluminescence (PL) and UV–vis spectrophotometry provide important information like formation of distinct nanostructures in different films and its effect on their optical band gap which has decreased from 3.74 to 3.37 eV as the film thickness increases. Most importantly these films have shown very high stability and a specialty to be recycled without much loss of their photo-catalytic activity, when tested as photo-catalysts for the degradation of methyl green dye (MG) from the wastewater under the exposure of 18 W energy of UV lamp.

  17. Block copolymer hollow fiber membranes with catalytic activity and pH-response.

    Science.gov (United States)

    Hilke, Roland; Pradeep, Neelakanda; Madhavan, Poornima; Vainio, Ulla; Behzad, Ali Reza; Sougrat, Rachid; Nunes, Suzana P; Peinemann, Klaus-Viktor

    2013-08-14

    We fabricated block copolymer hollow fiber membranes with self-assembled, shell-side, uniform pore structures. The fibers in these membranes combined pores able to respond to pH and acting as chemical gates that opened above pH 4, and catalytic activity, achieved by the incorporation of gold nanoparticles. We used a dry/wet spinning process to produce the asymmetric hollow fibers and determined the conditions under which the hollow fibers were optimized to create the desired pore morphology and the necessary mechanical stability. To induce ordered micelle assembly in the doped solution, we identified an ideal solvent mixture as confirmed by small-angle X-ray scattering. We then reduced p-nitrophenol with a gold-loaded fiber to confirm the catalytic performance of the membranes.

  18. Layered Double Hydroxide Nanoclusters: Aqueous, Concentrated, Stable, and Catalytically Active Colloids toward Green Chemistry.

    Science.gov (United States)

    Tokudome, Yasuaki; Morimoto, Tsuyoshi; Tarutani, Naoki; Vaz, Pedro D; Nunes, Carla D; Prevot, Vanessa; Stenning, Gavin B G; Takahashi, Masahide

    2016-05-24

    Increasing attention has been dedicated to the development of nanomaterials rendering green and sustainable processes, which occur in benign aqueous reaction media. Herein, we demonstrate the synthesis of another family of green nanomaterials, layered double hydroxide (LDH) nanoclusters, which are concentrated (98.7 g/L in aqueous solvent), stably dispersed (transparent sol for >2 weeks), and catalytically active colloids of nano LDHs (isotropic shape with the size of 7.8 nm as determined by small-angle X-ray scattering). LDH nanoclusters are available as colloidal building blocks to give access to meso- and macroporous LDH materials. Proof-of-concept applications revealed that the LDH nanocluster works as a solid basic catalyst and is separable from solvents of catalytic reactions, confirming the nature of nanocatalysts. The present work closely investigates the unique physical and chemical features of this colloid, the formation mechanism, and the ability to act as basic nanocatalysts in benign aqueous reaction systems.

  19. Graphdiyne oxides as excellent substrate for electroless deposition of Pd clusters with high catalytic activity.

    Science.gov (United States)

    Qi, Hetong; Yu, Ping; Wang, Yuexiang; Han, Guangchao; Liu, Huibiao; Yi, Yuanping; Li, Yuliang; Mao, Lanqun

    2015-04-29

    Graphdiyne (GDY), a novel kind of two-dimensional carbon allotrope consisting of sp- and sp(2)-hybridized carbon atoms, is found to be able to serve as the reducing agent and stabilizer for electroless deposition of highly dispersed Pd nanoparticles owing to its low reduction potential and highly conjugated electronic structure. Furthermore, we observe that graphdiyne oxide (GDYO), the oxidation form of GDY, can be used as an even excellent substrate for electroless deposition of ultrafine Pd clusters to form Pd/GDYO nanocomposite that exhibits a high catalytic performance toward the reduction of 4-nitrophenol. The high catalytic performance is considered to benefit from the rational design and electroless deposition of active metal catalysts with GDYO as the support.

  20. Green synthesis of silver nanoparticles, decorated on graphene oxide nanosheets and their catalytic activity

    Science.gov (United States)

    Sreekanth, T. V. M.; Jung, Min-Ji; Eom, In-Yong

    2016-01-01

    In this study, we develop an inexpensive and green route for the synthesis of silver nanoparticles (AgNPs) using Picrasma quassioides bark aqueous extract as reducing and capping agent and also eco-friendly decorate graphene oxide (GO) nanosheets with AgNPs (GO-AgNPs). Green synthesized AgNPs and GO-AgNPs composites were characterized by UV-Visible spectroscopy, SEM-EDX, and TEM-SAED techniques. The resulting GO-AgNPs contained about 41.35% of Ag and the AgNPs size ranges 17.5-66.5 nm, and GO-AgNPs size ranges 10-49.5 nm. Moreover, the GO-AgNPs exhibited excellent catalytic activity towards the methylene blue (MB) in the presence of sodium borohydride (NaBH4) at room temperature. This catalytic reaction completed within 15 min.

  1. Nickel-doped ceria nanoparticles for promoting catalytic activity of Pt/C for ethanol electrooxidation

    Science.gov (United States)

    Tan, Qiang; Du, Chunyu; Sun, Yongrong; Du, Lei; Yin, Geping; Gao, Yunzhi

    2014-10-01

    This paper reports the facile synthesis of monodispersed nickel-doped ceria nanoparticles by a thermal decomposition method, which is used to promote catalytic properties of Pt/C. The Pt/Ni-doped CeO2/C catalyst obtained exhibits remarkably high activity and stability towards the ethanol electrooxidation in acidic media. This is attributed to higher oxygen releasing capacity and stronger interaction of Ni-doped CeO2 with Pt than pure CeO2 nanoparticles that contribute positively to the removal of poisoning intermediates. We believe that the design concept and synthetic strategy of metal doped oxides used for fuel cell catalysts can be potentially extended to other catalytic fields.

  2. Block copolymer hollow fiber membranes with catalytic activity and pH-response

    KAUST Repository

    Hilke, Roland

    2013-08-14

    We fabricated block copolymer hollow fiber membranes with self-assembled, shell-side, uniform pore structures. The fibers in these membranes combined pores able to respond to pH and acting as chemical gates that opened above pH 4, and catalytic activity, achieved by the incorporation of gold nanoparticles. We used a dry/wet spinning process to produce the asymmetric hollow fibers and determined the conditions under which the hollow fibers were optimized to create the desired pore morphology and the necessary mechanical stability. To induce ordered micelle assembly in the doped solution, we identified an ideal solvent mixture as confirmed by small-angle X-ray scattering. We then reduced p-nitrophenol with a gold-loaded fiber to confirm the catalytic performance of the membranes. © 2013 American Chemical Society.

  3. Advances and perspectives in catalytic oxidation of hydrocarbons in liquid phase

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    This review article summarizes recent advances in catalytic oxidation of hydrocarbons, especially presents two strategies for activation of C-H bonds or molecular oxygen. Based on our own research results, the applications of the two methods in the oxidation of cyclohexane, toluene and ethyl benzene, etc. are introduced, and the perspectives of the two methods are also discussed.

  4. Saccharomyces cerevisiae DNA ligase IV supports imprecise end joining independently of its catalytic activity.

    Directory of Open Access Journals (Sweden)

    Kishore K Chiruvella

    2013-06-01

    Full Text Available DNA ligase IV (Dnl4 in budding yeast is a specialized ligase used in non-homologous end joining (NHEJ of DNA double-strand breaks (DSBs. Although point and truncation mutations arise in the human ligase IV syndrome, the roles of Dnl4 in DSB repair have mainly been examined using gene deletions. Here, Dnl4 catalytic point mutants were generated that were severely defective in auto-adenylation in vitro and NHEJ activity in vivo, despite being hyper-recruited to DSBs and supporting wild-type levels of Lif1 interaction and assembly of a Ku- and Lif1-containing complex at DSBs. Interestingly, residual levels of especially imprecise NHEJ were markedly higher in a deletion-based assay with Dnl4 catalytic mutants than with a gene deletion strain, suggesting a role of DSB-bound Dnl4 in supporting a mode of NHEJ catalyzed by a different ligase. Similarly, next generation sequencing of repair joints in a distinct single-DSB assay showed that dnl4-K466A mutation conferred a significantly different imprecise joining profile than wild-type Dnl4 and that such repair was rarely observed in the absence of Dnl4. Enrichment of DNA ligase I (Cdc9 in yeast at DSBs was observed in wild-type as well as dnl4 point mutant strains, with both Dnl4 and Cdc9 disappearing from DSBs upon 5' resection that was unimpeded by the presence of catalytically inactive Dnl4. These findings indicate that Dnl4 can promote mutagenic end joining independently of its catalytic activity, likely by a mechanism that involves Cdc9.

  5. Saccharomyces cerevisiae DNA ligase IV supports imprecise end joining independently of its catalytic activity.

    Science.gov (United States)

    Chiruvella, Kishore K; Liang, Zhuobin; Birkeland, Shanda R; Basrur, Venkatesha; Wilson, Thomas E

    2013-06-01

    DNA ligase IV (Dnl4 in budding yeast) is a specialized ligase used in non-homologous end joining (NHEJ) of DNA double-strand breaks (DSBs). Although point and truncation mutations arise in the human ligase IV syndrome, the roles of Dnl4 in DSB repair have mainly been examined using gene deletions. Here, Dnl4 catalytic point mutants were generated that were severely defective in auto-adenylation in vitro and NHEJ activity in vivo, despite being hyper-recruited to DSBs and supporting wild-type levels of Lif1 interaction and assembly of a Ku- and Lif1-containing complex at DSBs. Interestingly, residual levels of especially imprecise NHEJ were markedly higher in a deletion-based assay with Dnl4 catalytic mutants than with a gene deletion strain, suggesting a role of DSB-bound Dnl4 in supporting a mode of NHEJ catalyzed by a different ligase. Similarly, next generation sequencing of repair joints in a distinct single-DSB assay showed that dnl4-K466A mutation conferred a significantly different imprecise joining profile than wild-type Dnl4 and that such repair was rarely observed in the absence of Dnl4. Enrichment of DNA ligase I (Cdc9 in yeast) at DSBs was observed in wild-type as well as dnl4 point mutant strains, with both Dnl4 and Cdc9 disappearing from DSBs upon 5' resection that was unimpeded by the presence of catalytically inactive Dnl4. These findings indicate that Dnl4 can promote mutagenic end joining independently of its catalytic activity, likely by a mechanism that involves Cdc9.

  6. Electrosynthesis and catalytic activity of polymer-nickel particles composite electrode materials

    Energy Technology Data Exchange (ETDEWEB)

    Melki, Tahar; Zouaoui, Ahmed; Bendemagh, Barkahoum [Universite Ferhat Abbas, Setif (Algeria). Faculte des Sciences de l' Ingenieur. Dept. du Tronc Commun; Oliveira, Ione M.F. de; Oliveira, Gilver F. de [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Dept. de Quimica; Lepretre, Jean-Claude [UMR-5631 CNRS-INPG-UJF, St. Martin d' Heres Cedex (France). Lab. d' Electrochimie et de Physicochimie des Materiaux et Interfaces; Bucher, Christophe; Mou tet, Jean-Claude [Universite Joseph Fourier Grenoble 1 (France). Dept. de Chimie Moleculaire], e-mail: Jean-Claude.Moutet@ujf-grenoble.fr

    2009-07-01

    Nickel-polymer composite electrode materials have been synthesized using various strategies, all comprising the electrochemical reduction of nickel(II) cations or complexes, incorporated by either ion-exchange or complexation into various poly(pyrrole-carboxylate) thin films coated by oxidative electropolymerization onto carbon electrodes. The electrocatalytic activity and the stability of the different composites have been then evaluated in the course of the electrocatalytic hydrogenation of ketones and enones in aqueous electrolytes. The best results were obtained using nickel-polymer composites synthesized by electroreduction of nickel(II) ions complexed into polycarboxylate films, which are characterized by a high catalytic activity and a good operational stability. (author)

  7. Influence of hydrophobic mismatch on the catalytic activity of Escherichia coli GlpG rhomboid protease.

    Science.gov (United States)

    Foo, Alexander C Y; Harvey, Brandon G R; Metz, Jeff J; Goto, Natalie K

    2015-04-01

    Rhomboids comprise a broad family of intramembrane serine proteases that are found in a wide range of organisms and participate in a diverse array of biological processes. High-resolution structures of the catalytic transmembrane domain of the Escherichia coli GlpG rhomboid have provided numerous insights that help explain how hydrolytic cleavage can be achieved below the membrane surface. Key to this are observations that GlpG hydrophobic domain dimensions may not be sufficient to completely span the native lipid bilayer. This formed the basis for a model where hydrophobic mismatch Induces thinning of the local membrane environment to promote access to transmembrane substrates. However, hydrophobic mismatch also has the potential to alter the functional properties of the rhomboid, a possibility we explore in the current work. For this purpose, we purified the catalytic transmembrane domain of GlpG into phosphocholine or maltoside detergent micelles of varying alkyl chain lengths, and assessed proteolytic function with a model water-soluble substrate. Catalytic turnover numbers were found to depend on detergent alkyl chain length, with saturated chains containing 10-12 carbon atoms supporting maximal activity. Similar results were obtained in phospholipid bicelles, with no proteolytic activity being detected in longer-chain lipids. Although differences in thermal stability and GlpG oligomerization could not explain these activity differences, circular dichroism spectra suggest that mismatch gives rise to a small change in structure. Overall, these results demonstrate that hydrophobic mismatch can exert an inhibitory effect on rhomboid activity, with the potential for changes in local membrane environment to regulate activity in vivo.

  8. Preparation of Rh/Ni Bimetallic Nanoparticles and Their Catalytic Activities for Hydrogen Generation from Hydrolysis of KBH4

    Directory of Open Access Journals (Sweden)

    Liqiong Wang

    2017-04-01

    Full Text Available ISOBAM–104 protected Rh/Ni bimetallic nanoparticles (BNPs of 3.1 nm in diameter were synthesized by a co–reduction method with a rapid injection of KBH4 solution. The catalytic activities of as–prepared BNPs for hydrogen generation from hydrolysis of a basic KBH4 solution were evaluated. Ultraviolet–visible spectrophotometry (UV–Vis, transmission electron microscopy (TEM, and high–resolution transmission electron microscopy (HRTEM were employed to characterize the structure, particle size, and chemical composition of the resultant BNPs. Catalytic activities for hydrolysis of KBH4 and catalytic kinetics of prepared BNPs were also investigated. It was shown that Rh/Ni BNPs displayed much higher catalytic activities than that of Rh or Ni monometallic nanoparticles (MNPs, and the prepared Rh10Ni90 BNPs possessed the highest catalytic activities with a value of 11580 mol–H2·h−1·mol–Rh−1. The high catalytic activities of Rh/Ni BNPs could be attributed to the electron transfer effect between Rh and Ni atoms, which was confirmed by a density functional theory (DFT calculation. The apparent activation energy for hydrogen generation of the prepared Rh10Ni90 BNPs was about 47.2 ± 2.1kJ/mol according to a kinetic study.

  9. Catalytically active and hierarchically porous SAPO-11 zeolite synthesized in the presence of polyhexamethylene biguanidine

    KAUST Repository

    Liu, Yan

    2014-03-01

    Hierarchically porous SAPO-11 zeolite (H-SAPO-11) is rationally synthesized from a starting silicoaluminophosphate gel in the presence of polyhexamethylene biguanidine as a mesoscale template. The sample is well characterized by XRD, N2 sorption, SEM, TEM, NMR, XPS, NH3-TPD, and TG techniques. The results show that the sample obtained has good crystallinity, hierarchical porosity (mesopores at ca. 10nm and macropores at ca. 50-200nm), high BET surface area (226m2/g), large pore volume (0.25cm3/g), and abundant medium and strong acidic sites (0.36mmol/g). After loading Pt (0.5wt.%) on H-SAPO-11 by using wet impregnation method, catalytic hydroisomerization tests of n-dodecane show that the hierarchical Pt/SAPO-11 zeolite exhibits high conversion of n-dodecane and enhanced selectivity for branched products as well as reduced selectivity for cracking products, compared with conventional Pt/SAPO-11 zeolite. This phenomenon is reasonably attributed to the presence of hierarchical porosity, which is favorable for access of reactants on catalytically active sites. The improvement in catalytic performance in long-chain paraffin hydroisomerization over Pt/SAPO-11-based catalyst is of great importance for its industrial applications in the future. © 2013 Elsevier Inc.

  10. Synthesis, characterization and catalytic activity of birnessite type potassium manganese oxide nanotubes and nanorods

    Energy Technology Data Exchange (ETDEWEB)

    Ahmed, Khalid Abdelazez Mohamed, E-mail: khalidgnad@hotmail.com [School of Chemistry and Chemical Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China); Department of Chemistry, School of Chemistry and Chemical Technology, Faculty of Science and Technology, Al-Neelain University, P.O. Box 12702, Khartoum (Sudan); Huang Kaixun, E-mail: hxxzrf@mail.hust.edu.cn [School of Chemistry and Chemical Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China)

    2012-04-16

    Highlights: Black-Right-Pointing-Pointer Birnessite type manganese oxides nanotubes and nanorods were prepared by calcination route. Black-Right-Pointing-Pointer The transition from tube to rod structure is described by an oriented attachment-thermodynamical (OA-TD) process. Black-Right-Pointing-Pointer The catalytic degradation efficiency of safranin O by as-prepared products was compared. - Abstract: Birnessite-type manganese oxide nanotubes and nanorods were synthesized via a calcination process using manganese acetate and potassium hydroxide as precursors in presence of polyethylene glycol-melamine-formaldehyde. As-prepared products were characterized by XRD, FT-IR, FE-SEM, TEM, SA-ED, HR-TEM, Brunauer-Emmett-Teller (BET) and TGA analyses. The influences of reaction temperature and time on the morphology of manganese oxide nanocrystals were investigated. The oriented attachment-thermodynamical (OA-TD) process is suggested to describe the transition from tube to rod structure. Their capability of catalytic degradation of safranin O was compared. The results indicate that birnessite-type manganese oxide nanotube has higher catalytic activity for than nanorod crystal in aqueous solution, because it has a larger surface area. The decomposition of safranin O follows pseudo-first order kinetics and is markedly affected by pH.

  11. Catalytic oxidation of pulping effluent by activated carbon-supported heterogeneous catalysts.

    Science.gov (United States)

    Yadav, Bholu Ram; Garg, Anurag

    2016-01-01

    The present study deals with the non-catalytic and catalytic wet oxidation (CWO) for the removal of persistent organic compounds from the pulping effluent. Two activated carbon-supported heterogeneous catalysts (Cu/Ce/AC and Cu/Mn/AC) were used for CWO after characterization by the following techniques: temperature-programmed reduction, Fourier transform infrared spectroscopy and thermo-gravimetric analysis. The oxidation reaction was performed in a batch high-pressure reactor (capacity = 0.7  L) at moderate oxidation conditions (temperature = 190°C and oxygen pressure = 0.9 MPa). With Cu/Ce/AC catalyst, the maximum chemical oxygen demand (COD), total organic carbon (TOC) and lignin removals of 79%, 77% and 88% were achieved compared to only 50% removal during the non-catalytic process. The 5-day biochemical oxygen demand (BOD5) to COD ratio (a measure for biodegradability) of the pulping effluent was improved to 0.52 from an initial value of 0.16. The mass balance calculations for solid recovered after CWO reaction showed 8% and 10% deduction in catalyst mass primarily attributed to the loss of carbon and metal leaching. After the CWO process, carbon deposition was also observed on the recovered catalyst which was responsible for around 3-4% TOC reduction.

  12. Physics-based enzyme design: predicting binding affinity and catalytic activity.

    Science.gov (United States)

    Sirin, Sarah; Pearlman, David A; Sherman, Woody

    2014-12-01

    Computational enzyme design is an emerging field that has yielded promising success stories, but where numerous challenges remain. Accurate methods to rapidly evaluate possible enzyme design variants could provide significant value when combined with experimental efforts by reducing the number of variants needed to be synthesized and speeding the time to reach the desired endpoint of the design. To that end, extending our computational methods to model the fundamental physical-chemical principles that regulate activity in a protocol that is automated and accessible to a broad population of enzyme design researchers is essential. Here, we apply a physics-based implicit solvent MM-GBSA scoring approach to enzyme design and benchmark the computational predictions against experimentally determined activities. Specifically, we evaluate the ability of MM-GBSA to predict changes in affinity for a steroid binder protein, catalytic turnover for a Kemp eliminase, and catalytic activity for α-Gliadin peptidase variants. Using the enzyme design framework developed here, we accurately rank the most experimentally active enzyme variants, suggesting that this approach could provide enrichment of active variants in real-world enzyme design applications.

  13. Silylation of C-H bonds in aromatic heterocycles by an Earth-abundant metal catalyst

    Science.gov (United States)

    Toutov, Anton A.; Liu, Wen-Bo; Betz, Kerry N.; Fedorov, Alexey; Stoltz, Brian M.; Grubbs, Robert H.

    2015-02-01

    Heteroaromatic compounds containing carbon-silicon (C-Si) bonds are of great interest in the fields of organic electronics and photonics, drug discovery, nuclear medicine and complex molecule synthesis, because these compounds have very useful physicochemical properties. Many of the methods now used to construct heteroaromatic C-Si bonds involve stoichiometric reactions between heteroaryl organometallic species and silicon electrophiles or direct, transition-metal-catalysed intermolecular carbon-hydrogen (C-H) silylation using rhodium or iridium complexes in the presence of excess hydrogen acceptors. Both approaches are useful, but their limitations include functional group incompatibility, narrow scope of application, high cost and low availability of the catalysts, and unproven scalability. For this reason, a new and general catalytic approach to heteroaromatic C-Si bond construction that avoids such limitations is highly desirable. Here we report an example of cross-dehydrogenative heteroaromatic C-H functionalization catalysed by an Earth-abundant alkali metal species. We found that readily available and inexpensive potassium tert-butoxide catalyses the direct silylation of aromatic heterocycles with hydrosilanes, furnishing heteroarylsilanes in a single step. The silylation proceeds under mild conditions, in the absence of hydrogen acceptors, ligands or additives, and is scalable to greater than 100 grams under optionally solvent-free conditions. Substrate classes that are difficult to activate with precious metal catalysts are silylated in good yield and with excellent regioselectivity. The derived heteroarylsilane products readily engage in versatile transformations enabling new synthetic strategies for heteroaromatic elaboration, and are useful in their own right in pharmaceutical and materials science applications.

  14. A Redox 2-Cys Mechanism Regulates the Catalytic Activity of Divergent Cyclophilins1[W

    Science.gov (United States)

    Campos, Bruna Medéia; Sforça, Mauricio Luis; Ambrosio, Andre Luis Berteli; Domingues, Mariane Noronha; Brasil de Souza, Tatiana de Arruda Campos; Barbosa, João Alexandre Ribeiro Gonçalvez; Leme, Adriana Franco Paes; Perez, Carlos Alberto; Whittaker, Sara Britt-Marie; Murakami, Mario Tyago; Zeri, Ana Carolina de Matos; Benedetti, Celso Eduardo

    2013-01-01

    The citrus (Citrus sinensis) cyclophilin CsCyp is a target of the Xanthomonas citri transcription activator-like effector PthA, required to elicit cankers on citrus. CsCyp binds the citrus thioredoxin CsTdx and the carboxyl-terminal domain of RNA polymerase II and is a divergent cyclophilin that carries the additional loop KSGKPLH, invariable cysteine (Cys) residues Cys-40 and Cys-168, and the conserved glutamate (Glu) Glu-83. Despite the suggested roles in ATP and metal binding, the functions of these unique structural elements remain unknown. Here, we show that the conserved Cys residues form a disulfide bond that inactivates the enzyme, whereas Glu-83, which belongs to the catalytic loop and is also critical for enzyme activity, is anchored to the divergent loop to maintain the active site open. In addition, we demonstrate that Cys-40 and Cys-168 are required for the interaction with CsTdx and that CsCyp binds the citrus carboxyl-terminal domain of RNA polymerase II YSPSAP repeat. Our data support a model where formation of the Cys-40-Cys-168 disulfide bond induces a conformational change that disrupts the interaction of the divergent and catalytic loops, via Glu-83, causing the active site to close. This suggests a new type of allosteric regulation in divergent cyclophilins, involving disulfide bond formation and a loop-displacement mechanism. PMID:23709667

  15. Superior acidic catalytic activity and stability of Fe-doped HTaWO6 nanotubes

    KAUST Repository

    Liu, He

    2017-07-26

    Fe-doped HTaWO6 (H1-3xFexTaWO6, x = 0.23) nanotubes as highly active solid acid catalysts were prepared via an exfoliation-scrolling-exchange process. The specific surface area and pore volume of undoped nanotubes (20.8 m2 g-1, 0.057 cm3 g-1) were remarkably enhanced through Fe3+ ion-exchange (>100 m2 g-1, 0.547 cm3 g-1). Doping Fe ions into the nanotubes endowed them with improved thermal stability due to the stronger interaction between the intercalated Fe3+ ions and the host layers. This interaction also facilitated the preservation of effective Brønsted acid sites and the generation of new acid sites. The integration of these functional roles resulted in Fe-doped nanotubes with high acidic catalytic activities in the Friedel-Crafts alkylation of anisole and the esterification of acetic acid. Facile accessibility to active sites, generation of effective Brønsted acid sites, high stability of the tubular structure and strong acid sites were found to synergistically contribute to the excellent acidic catalytic efficiency. Additionally, the activity of cycled nanocatalysts can be easily recovered through annealing treatment.

  16. Green Synthesis and Catalytic Activity of Gold Nanoparticles Synthesized by Artemisia capillaris Water Extract

    Science.gov (United States)

    Lim, Soo Hyeon; Ahn, Eun-Young; Park, Youmie

    2016-10-01

    Gold nanoparticles were synthesized using a water extract of Artemisia capillaris (AC-AuNPs) under different extract concentrations, and their catalytic activity was evaluated in a 4-nitrophenol reduction reaction in the presence of sodium borohydride. The AC-AuNPs showed violet or wine colors with characteristic surface plasmon resonance bands at 534 543 nm that were dependent on the extract concentration. Spherical nanoparticles with an average size of 16.88 ± 5.47 29.93 ± 9.80 nm were observed by transmission electron microscopy. A blue shift in the maximum surface plasmon resonance was observed with increasing extract concentration. The face-centered cubic structure of AC-AuNPs was confirmed by high-resolution X-ray diffraction analysis. Based on phytochemical screening and Fourier transform infrared spectra, flavonoids, phenolic compounds, and amino acids present in the extract contributed to the reduction of Au ions to AC-AuNPs. The average size of the AC-AuNPs decreased as the extract concentration during the synthesis was increased. Higher 4-nitrophenol reduction reaction rate constants were observed for smaller sizes. The extract in the AC-AuNPs was removed by centrifugation to investigate the effect of the extract in the reduction reaction. Interestingly, the removal of extracts greatly enhanced their catalytic activity by up to 50.4 %. The proposed experimental method, which uses simple centrifugation, can be applied to other metallic nanoparticles that are green synthesized with plant extracts to enhance their catalytic activity.

  17. The roles of active site residues in the catalytic mechanism of methylaspartate ammonia-lyase.

    Science.gov (United States)

    Raj, Hans; Poelarends, Gerrit J

    2013-01-01

    Methylaspartate ammonia-lyase (MAL; EC 4.3.1.2) catalyzes the reversible addition of ammonia to mesaconate to yield l-threo-(2S,3S)-3-methylaspartate and l-erythro-(2S,3R)-3-methylaspartate as products. In the proposed minimal mechanism for MAL of Clostridium tetanomorphum, Lys-331 acts as the (S)-specific base catalyst and abstracts the 3S-proton from l-threo-3-methylaspartate, resulting in an enolate anion intermediate. This enolic intermediate is stabilized by coordination to the essential active site Mg(2+) ion and hydrogen bonding to the Gln-329 residue. Collapse of this intermediate results in the release of ammonia and the formation of mesaconate. His-194 likely acts as the (R)-specific base catalyst and abstracts the 3R-proton from the l-erythro isomer of 3-methylaspartate, yielding the enolic intermediate. In the present study, we have investigated the importance of the residues Gln-73, Phe-170, Gln-172, Tyr-356, Thr-360, Cys-361 and Leu-384 for the catalytic activity of C. tetanomorphum MAL. These residues, which are part of the enzyme surface lining the substrate binding pocket, were subjected to site-directed mutagenesis and the mutant enzymes were characterized for their structural integrity, ability to catalyze the amination of mesaconate, and regio- and diastereoselectivity. Based on the observed properties of the mutant enzymes, combined with previous structural studies and protein engineering work, we propose a detailed catalytic mechanism for the MAL-catalyzed reaction, in which the side chains of Gln-73, Gln-172, Tyr-356, Thr-360, and Leu-384 provide favorable interactions with the substrate, which are important for substrate binding and activation. This detailed knowledge of the catalytic mechanism of MAL can serve as a guide for future protein engineering experiments.

  18. Biorecovery of gold as nanoparticles and its catalytic activities for p-nitrophenol degradation.

    Science.gov (United States)

    Zhu, Nengwu; Cao, Yanlan; Shi, Chaohong; Wu, Pingxiao; Ma, Haiqin

    2016-04-01

    Recovery of gold from aqueous solution using simple and economical methodologies is highly desirable. In this work, recovery of gold as gold nanoparticles (AuNPs) by Shewanella haliotis with sodium lactate as electron donor was explored. The results showed that the process was affected by the concentration of biomass, sodium lactate, and initial gold ions as well as pH value. Specifically, the presence of sodium lactate determines the formation of nanoparticles, biomass, and AuCl4 (-) concentration mainly affected the size and dispersity of the products, reaction pH greatly affected the recovery efficiency, and morphology of the products in the recovery process. Under appropriate conditions (5.25 g/L biomass, 40 mM sodium lactate, 0.5 mM AuCl4 (-), and pH of 5), the recovery efficiency was almost 99 %, and the recovered AuNPs were mainly spherical with size range of 10-30 nm (~85 %). Meanwhile, Fourier transforms infrared spectroscopy and X-ray photoelectron spectroscopy demonstrated that carboxyl and amine groups might play an important role in the process. In addition, the catalytic activity of the AuNPs recovered under various conditions was testified by analyzing the reduction rate of p-nitrophenol by borohydride. The biorecovered AuNPs exhibited interesting size and shape-dependent catalytic activity, of which the spherical particle with smaller size showed the highest catalytic reduction activity with rate constant of 0.665 min(-1).

  19. Dynamics of the active site architecture in plant-type ferredoxin-NADP(+) reductases catalytic complexes.

    Science.gov (United States)

    Sánchez-Azqueta, Ana; Catalano-Dupuy, Daniela L; López-Rivero, Arleth; Tondo, María Laura; Orellano, Elena G; Ceccarelli, Eduardo A; Medina, Milagros

    2014-10-01

    Kinetic isotope effects in reactions involving hydride transfer and their temperature dependence are powerful tools to explore dynamics of enzyme catalytic sites. In plant-type ferredoxin-NADP(+) reductases the FAD cofactor exchanges a hydride with the NADP(H) coenzyme. Rates for these processes are considerably faster for the plastidic members (FNR) of the family than for those belonging to the bacterial class (FPR). Hydride transfer (HT) and deuteride transfer (DT) rates for the NADP(+) coenzyme reduction of four plant-type FNRs (two representatives of the plastidic type FNRs and the other two from the bacterial class), and their temperature dependences are here examined applying a full tunnelling model with coupled environmental fluctuations. Parameters for the two plastidic FNRs confirm a tunnelling reaction with active dynamics contributions, but isotope effects on Arrhenius factors indicate a larger contribution for donor-acceptor distance (DAD) dynamics in the Pisum sativum FNR reaction than in the Anabaena FNR reaction. On the other hand, parameters for bacterial FPRs are consistent with passive environmental reorganisation movements dominating the HT coordinate and no contribution of DAD sampling or gating fluctuations. This indicates that active sites of FPRs are more organised and rigid than those of FNRs. These differences must be due to adaptation of the active sites and catalytic mechanisms to fulfil their particular metabolic roles, establishing a compromise between protein flexibility and functional optimisation. Analysis of site-directed mutants in plastidic enzymes additionally indicates the requirement of a minimal optimal architecture in the catalytic complex to provide a favourable gating contribution. Copyright © 2014 Elsevier B.V. All rights reserved.

  20. Fe-Mn bi-metallic oxides loaded on granular activated carbon to enhance dye removal by catalytic ozonation.

    Science.gov (United States)

    Tang, Shoufeng; Yuan, Deling; Zhang, Qi; Liu, Yameng; Zhang, Qi; Liu, Zhengquan; Huang, Haiming

    2016-09-01

    A Fe-Mn bi-metallic oxide supported on granular activated carbon (Fe-Mn GAC) has been fabricated by an impregnation-desiccation method and tested in the catalytic ozonation of methyl orange (MO) degradation and mineralization. X-ray diffraction, scanning electron microscopy, and Fourier transform infrared spectroscopy characterizations revealed that Fe-Mn oxides were successfully loaded and uniformly distributed on the GAC, and nitrogen adsorption isotherms showed that the supported GAC retained a large surface area and a high pore volume compared with the pristine GAC. The catalytic activity was systematically assessed by monitoring the MO removal efficiencies at different operational parameters, such as catalyst dosage, initial solution pH, and ozone flow rate. The Fe-Mn GAC exhibited better catalytic activity relative to ozone alone and GAC alone, improving the TOC removal by 24.5 and 11.5 % and COD removal by 13.6 and 7.3 %, respectively. The reusability of the hybrid was examined over five consecutive cyclic treatments. The Fe-Mn GAC catalytic activity was only a slight loss in the cycles, showing good stability. The addition of Na2CO3 as hydroxyl radicals (•OH) scavengers proved that the catalytic ozonation mechanism was the enhanced generation of •OH by the Fe-Mn GAC. The above results render the Fe-Mn GAC an industrially promising candidate for catalytic ozonation of dye contaminant removal.

  1. Polyvinylpyrrolidone adsorption effects on the morphologies of synthesized platinum particles and its catalytic activity

    Energy Technology Data Exchange (ETDEWEB)

    Ooi, Mahayatun Dayana Johan [Nano - Optoelectronic Research and Technology Laboratory, School of Physics, Universiti Sains Malaysia, 11800, Minden, Pulau Pinang (Malaysia); Aziz, Azlan Abdul [Nano - Optoelectronic Research and Technology Laboratory, School of Physics, Universiti Sains Malaysia, 11800, Minden, Pulau Pinang (Malaysia); Nanobiotechnology Research and Innovation (NanoBRI), INFORMM, Universiti Sains Malaysia, 11800, Minden, Pulau Pinang (Malaysia)

    2015-04-24

    Flower-like Platinum micro-structures were synthesized from different concentration of the PVP using solvothermal method. At 5.0×10{sup −3} mmol of PVP, well-defined flower-like pattern consists of triangular petals radiating from the centre were produced whereas larger flower network developed at higher PVP concentration. High degree of crystallinity was obtained upon each increment of PVP. The well defined flower like pattern synthesized using 5.0×10{sup −3} mmol PVP exhibit the highest catalytic activity and stability towards electro-oxidation of formic acid.

  2. Catalytic Activity and Photophysical Properties of Biomolecules Immobilized on Mesoporous Silica

    DEFF Research Database (Denmark)

    Ikemoto, Hideki

    hybrid materials used for further study. One metalloenzyme, horseradish peroxidase(HRP), was immobilized on rod-shaped SBA-15 by physical adsorption. The catalytic activity of free and immobilized enzyme was first compared at room temperature. Details of the enzyme kinetics including the apparent...... and increased hydration strength of the protein inside the nanopores. A copper-containing enzyme, galactose oxidase (GAOX), was immobilized on SBA-15 with a hexagonally ordered pore structure, or on mesocellular foam (MCF)-type mesoporous silica with a cage-like pore structure. Physical adsorption...

  3. Structure of the catalytic domain of Plasmodium falciparum ARF GTPase-activating protein (ARFGAP)

    Energy Technology Data Exchange (ETDEWEB)

    Cook, William J.; Senkovich, Olga; Chattopadhyay, Debasish (UAB)

    2012-03-26

    The crystal structure of the catalytic domain of the ADP ribosylation factor GTPase-activating protein (ARFGAP) from Plasmodium falciparum has been determined and refined to 2.4 {angstrom} resolution. Multiwavelength anomalous diffraction (MAD) data were collected utilizing the Zn{sup 2+} ion bound at the zinc-finger domain and were used to solve the structure. The overall structure of the domain is similar to those of mammalian ARFGAPs. However, several amino-acid residues in the area where GAP interacts with ARF1 differ in P. falciparum ARFGAP. Moreover, a number of residues that form the dimer interface in the crystal structure are unique in P. falciparum ARFGAP.

  4. Polyvinylpyrrolidone adsorption effects on the morphologies of synthesized platinum particles and its catalytic activity

    Science.gov (United States)

    Ooi, Mahayatun Dayana Johan; Aziz, Azlan Abdul

    2015-04-01

    Flower-like Platinum micro-structures were synthesized from different concentration of the PVP using solvothermal method. At 5.0×10-3 mmol of PVP, well-defined flower-like pattern consists of triangular petals radiating from the centre were produced whereas larger flower network developed at higher PVP concentration. High degree of crystallinity was obtained upon each increment of PVP. The well defined flower like pattern synthesized using 5.0×10-3 mmol PVP exhibit the highest catalytic activity and stability towards electro-oxidation of formic acid.

  5. Facile synthesis and excellent catalytic activity of gold nanoparticles on graphene oxide

    Institute of Scientific and Technical Information of China (English)

    Yong Qiang He; Na Na Zhang; Yu Liu; Jian Ping Gao; Mao Cong Yi; Qiao Juan Gong; Hai Xia Qiu

    2012-01-01

    For the first time,Au nanoparticles on graphene oxide (GO-AuNPs) were successfully fabricated without applying any additional reductants,just by the redox reaction between AuCl4-1 and GO.Their structure was characterized by transmission electron microscopy and X-ray powder diffraction.The results show that flower-like AuNPs were successfully dispersed on GO surface.Importantly,they showed a high catalytic activity for the Suzuki-Miyaura coupling reaction in an aqueous medium.

  6. Nanocaged enzymes with enhanced catalytic activity and increased stability against protease digestion.

    Science.gov (United States)

    Zhao, Zhao; Fu, Jinglin; Dhakal, Soma; Johnson-Buck, Alexander; Liu, Minghui; Zhang, Ting; Woodbury, Neal W; Liu, Yan; Walter, Nils G; Yan, Hao

    2016-02-10

    Cells routinely compartmentalize enzymes for enhanced efficiency of their metabolic pathways. Here we report a general approach to construct DNA nanocaged enzymes for enhancing catalytic activity and stability. Nanocaged enzymes are realized by self-assembly into DNA nanocages with well-controlled stoichiometry and architecture that enabled a systematic study of the impact of both encapsulation and proximal polyanionic surfaces on a set of common metabolic enzymes. Activity assays at both bulk and single-molecule levels demonstrate increased substrate turnover numbers for DNA nanocage-encapsulated enzymes. Unexpectedly, we observe a significant inverse correlation between the size of a protein and its activity enhancement. This effect is consistent with a model wherein distal polyanionic surfaces of the nanocage enhance the stability of active enzyme conformations through the action of a strongly bound hydration layer. We further show that DNA nanocages protect encapsulated enzymes against proteases, demonstrating their practical utility in functional biomaterials and biotechnology.

  7. Nanocaged enzymes with enhanced catalytic activity and increased stability against protease digestion

    Science.gov (United States)

    Zhao, Zhao; Fu, Jinglin; Dhakal, Soma; Johnson-Buck, Alexander; Liu, Minghui; Zhang, Ting; Woodbury, Neal W.; Liu, Yan; Walter, Nils G.; Yan, Hao

    2016-01-01

    Cells routinely compartmentalize enzymes for enhanced efficiency of their metabolic pathways. Here we report a general approach to construct DNA nanocaged enzymes for enhancing catalytic activity and stability. Nanocaged enzymes are realized by self-assembly into DNA nanocages with well-controlled stoichiometry and architecture that enabled a systematic study of the impact of both encapsulation and proximal polyanionic surfaces on a set of common metabolic enzymes. Activity assays at both bulk and single-molecule levels demonstrate increased substrate turnover numbers for DNA nanocage-encapsulated enzymes. Unexpectedly, we observe a significant inverse correlation between the size of a protein and its activity enhancement. This effect is consistent with a model wherein distal polyanionic surfaces of the nanocage enhance the stability of active enzyme conformations through the action of a strongly bound hydration layer. We further show that DNA nanocages protect encapsulated enzymes against proteases, demonstrating their practical utility in functional biomaterials and biotechnology. PMID:26861509

  8. Relation between the structure and catalytic activity for automotive emissions. Use of x-ray anomalous dispersion effect

    CERN Document Server

    Mizuki, J; Tanaka, H

    2003-01-01

    The employment of the X-ray anomalous dispersion effect allows us to detect the change in structure of catalytic converters with the environment exposed. Here we show that palladium atoms in a perovskite crystal move into and out of the crystal by anomalous X-ray diffraction and absorption techniques. This movement of the precious metal plays an important role to keep the catalytic activity long-lived. (author)

  9. Parkin mitochondrial translocation is achieved through a novel catalytic activity coupled mechanism

    Institute of Scientific and Technical Information of China (English)

    Xinde Zheng; Tony Hunter

    2013-01-01

    Pink1,a mitochondrial kinase,and Parkin,an E3 ubiquitin ligase,function in mitochondrial maintenance.Pink1 accumulates on depolarized mitochondria,where it recruits Parkin to mainly induce K63-1inked chain ubiquitination of outer membrane proteins and eventually mitophagy.Parkin belongs to the RBR E3 iigase family.Recently,it has been proposed that the RBR domain transfers ubiquitin to targets via a cysteine-ubiquitin enzyme intermediate,in a manner similar to HECT domain E3 ligases.However,direct evidence for a ubiquitin transfer mechanism and its importance for Parkin's in vivo function is still missing.Here,we report that Parkin E3 activity relies on cysteinemediated ubiquitin transfer during mitophagy.Mutating the putative catalytic cysteine to serine (Parkin C431S)traps ubiquitin,and surprisingly,also abrogates Parkin mitochondrial translocation,indicating that E3 activity is essential for Parkin translocation.We found that Parkin can bind to K63-1inked ubiquitin chains,and that targeting K63-mimicking ubiquitin chains to mitochondria restores Parkin C431S localization.We propose that Parkin translocation is achieved through a novel catalytic activity coupled mechanism.

  10. Parkin mitochondrial translocation is achieved through a novel catalytic activity coupled mechanism

    Science.gov (United States)

    Zheng, Xinde; Hunter, Tony

    2013-01-01

    Pink1, a mitochondrial kinase, and Parkin, an E3 ubiquitin ligase, function in mitochondrial maintenance. Pink1 accumulates on depolarized mitochondria, where it recruits Parkin to mainly induce K63-linked chain ubiquitination of outer membrane proteins and eventually mitophagy. Parkin belongs to the RBR E3 ligase family. Recently, it has been proposed that the RBR domain transfers ubiquitin to targets via a cysteine∼ubiquitin enzyme intermediate, in a manner similar to HECT domain E3 ligases. However, direct evidence for a ubiquitin transfer mechanism and its importance for Parkin's in vivo function is still missing. Here, we report that Parkin E3 activity relies on cysteine-mediated ubiquitin transfer during mitophagy. Mutating the putative catalytic cysteine to serine (Parkin C431S) traps ubiquitin, and surprisingly, also abrogates Parkin mitochondrial translocation, indicating that E3 activity is essential for Parkin translocation. We found that Parkin can bind to K63-linked ubiquitin chains, and that targeting K63-mimicking ubiquitin chains to mitochondria restores Parkin C431S localization. We propose that Parkin translocation is achieved through a novel catalytic activity coupled mechanism. PMID:23670163

  11. CO oxidation over ruthenium: identification of the catalytically active phases at near-atmospheric pressures

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Feng; Goodman, Wayne D.

    2012-05-21

    CO oxidation was carried out over Ru(0001) and RuO2(110) thin film grown on Ru(0001) at various O2/CO ratios near atmospheric pressures. Reaction kinetics, coupled with in situ polarization modulation infrared reflection absorption spectroscopy (PM-IRAS) and post-reaction Auger electron spectroscopy (AES) measurements were used to identify the catalytically relevant phases at different reaction conditions. Under stoichiometric and reducing conditions at all reaction temperatures, as well as net-oxidizing reaction conditions below {approx}475 K, a reduced metallic phase with chemisorbed oxygen is the thermodynamically stable and catalytically active phase. On this surface CO oxidation occurs at surface defect sites, for example step edges. Only at net-oxidizing reaction conditions and above {approx}475 K is the RuO2 thin film grown on metallic Ru stable and active. However, RuO2 is not active itself without the existence of the metal substrate, suggesting the importance of a strong metal-substrate interaction (SMSI).

  12. Relief of autoinhibition by conformational switch explains enzyme activation by a catalytically dead paralog

    Energy Technology Data Exchange (ETDEWEB)

    Volkov, Oleg A.; Kinch, Lisa; Ariagno, Carson; Deng, Xiaoyi; Zhong, Shihua; Grishin, Nick; Tomchick, Diana R.; Chen, Zhe; Phillips, Margaret A.

    2016-12-15

    Catalytically inactive enzyme paralogs occur in many genomes. Some regulate their active counterparts but the structural principles of this regulation remain largely unknown. We report X-ray structures ofTrypanosoma brucei S-adenosylmethionine decarboxylase alone and in functional complex with its catalytically dead paralogous partner, prozyme. We show monomericTbAdoMetDC is inactive because of autoinhibition by its N-terminal sequence. Heterodimerization with prozyme displaces this sequence from the active site through a complex mechanism involving acis-to-transproline isomerization, reorganization of a β-sheet, and insertion of the N-terminal α-helix into the heterodimer interface, leading to enzyme activation. We propose that the evolution of this intricate regulatory mechanism was facilitated by the acquisition of the dimerization domain, a single step that can in principle account for the divergence of regulatory schemes in the AdoMetDC enzyme family. These studies elucidate an allosteric mechanism in an enzyme and a plausible scheme by which such complex cooperativity evolved.

  13. The influence of copper in dealloyed binary platinum–copper electrocatalysts on methanol electroxidation catalytic activities

    Energy Technology Data Exchange (ETDEWEB)

    Poochai, Chatwarin [Department of Chemistry, Faculty of Science, Mahidol University, Bangkok 10400 (Thailand); Center of Excellence for Innovation in Chemistry, Faculty of Science, Mahidol University, Bangkok 10400 (Thailand); Veerasai, Waret, E-mail: waret.vee@mahidol.ac.th [Department of Chemistry, Faculty of Science, Mahidol University, Bangkok 10400 (Thailand); Center of Excellence for Innovation in Chemistry, Faculty of Science, Mahidol University, Bangkok 10400 (Thailand); Somsook, Ekasith [Department of Chemistry, Faculty of Science, Mahidol University, Bangkok 10400 (Thailand); Center of Excellence for Innovation in Chemistry, Faculty of Science, Mahidol University, Bangkok 10400 (Thailand); Dangtip, Somsak [Department of Physics, and NANOTEC COE at Mahidol University, Faculty of Science, Mahidol University, Bangkok 10400 (Thailand)

    2015-08-01

    In this study, we prepared and characterized carbon paper-supported dealloyed binary Pt–Cu core–shell electrocatalysts (denoted as Pt{sub x}Cu{sub (100−x)/}CP) by cyclic co-electrodeposition and selective copper dealloying in an acidic medium, and we investigated the effect of the copper content in the samples on the catalytic activities toward methanol electroxidation reaction (MOR). X-ray photo-emission spectroscopy (XPS) and inductively coupled plasma atomic emission spectroscopy (ICP-AES) indicated that the structure of dealloyed binary Pt–Cu catalysts possessed a Pt-rich shell and a Cu rich core. X-ray absorption near edge spectroscopy (XANES) displayed that the oxidation states of Pt and Cu were zero and one, respectively, implying the formation of metallic Pt and Cu{sub 2}O, respectively. X-ray diffraction spectroscopy (XRD) confirmed that Cu was inserted into a face-centered cubic Pt structure forming Pt–Cu alloys. Scanning electron microscopy (SEM) and transmission electron microscope (TEM) displayed a cubic shape of Pt/CP and a spherical shape of Pt{sub x}Cu{sub (100−x)/}CP with several hundred nanometer sizes of agglomeration that depended on the Cu content. Cyclic voltammetry, chronoamperometry, and electrochemical impedance spectroscopy were performed to confirm that the sample of Pt{sub 70}Cu{sub 30}/CP exhibited the best catalytic activities in terms of the specific current, current density, catalytic poisoning tolerance, and stability. - Graphical abstract: Display Omitted - Highlights: • Binary electrocatalysts of Pt{sub x}Cu{sub (100−x)}/CP were prepared by cyclic co-electrodeposition and selective copper dealloying. • The structures of Pt{sub x}Cu{sub (100−x)}/CP were a Pt rich shell and a Cu rich core. • The Pt{sub 70}Cu{sub 30}/CP was the excellent catalytic activity towards methanol electrooxidation and CO{sub ads} tolerance.

  14. Observation of Fe(V)=O using variable-temperature mass spectrometry and its enzyme-like C-H and C=C oxidation reactions.

    Science.gov (United States)

    Prat, Irene; Mathieson, Jennifer S; Güell, Mireia; Ribas, Xavi; Luis, Josep M; Cronin, Leroy; Costas, Miquel

    2011-09-04

    Oxo-transfer chemistry mediated by iron underpins many biological processes and today is emerging as synthetically very important for the catalytic oxidation of C-H and C=C moieties that are hard to activate conventionally. Despite the vast amount of research in this area, experimental characterization of the reactive species under catalytic conditions is very limited, although a Fe(V)=O moiety was postulated. Here we show, using variable-temperature mass spectrometry, the generation of a Fe(V)=O species within a synthetic non-haem complex at -40 °C and its reaction with an olefin. Also, with isotopic labelling we were able both to follow oxygen-atom transfer from H(2)O(2)/H(2)O through Fe(V)=O to the products and to probe the reactivity as a function of temperature. This study pioneers the implementation of variable-temperature mass spectrometry to investigate reactive intermediates.

  15. The Botrytis cinerea xylanase Xyn11A contributes to virulence with its necrotizing activity, not with its catalytic activity

    Directory of Open Access Journals (Sweden)

    González Celedonio

    2010-02-01

    Full Text Available Abstract Background The Botrytis cinerea xylanase Xyn11A has been previously shown to be required for full virulence of this organism despite its poor contribution to the secreted xylanase activity and the low xylan content of B. cinerea hosts. Intriguingly, xylanases from other fungi have been shown to have the property, independent of the xylan degrading activity, to induce necrosis when applied to plant tissues, so we decided to test the hypothesis that secreted Xyn11A contributes to virulence by promoting the necrosis of the plant tissue surrounding the infection, therefore facilitating the growth of this necrotroph. Results We show here that Xyn11A has necrotizing activity on plants and that this capacity is conserved in site-directed mutants of the protein lacking the catalytic activity. Besides, Xyn11A contributes to the infection process with the necrotizing and not with the xylan hydrolyzing activity, as the catalytically-impaired Xyn11A variants were able to complement the lower virulence of the xyn11A mutant. The necrotizing activity was mapped to a 30-amino acids peptide in the protein surface, and this region was also shown to mediate binding to tobacco spheroplasts by itself. Conclusions The main contribution of the xylanase Xyn11A to the infection process of B. cinerea is to induce necrosis of the infected plant tissue. A conserved 30-amino acids region on the enzyme surface, away from the xylanase active site, is responsible for this effect and mediates binding to plant cells.

  16. Enantioselective, intermolecular benzylic C-H amination catalysed by an engineered iron-haem enzyme

    Science.gov (United States)

    Prier, Christopher K.; Zhang, Ruijie K.; Buller, Andrew R.; Brinkmann-Chen, Sabine; Arnold, Frances H.

    2017-07-01

    C-H bonds are ubiquitous structural units of organic molecules. Although these bonds are generally considered to be chemically inert, the recent emergence of methods for C-H functionalization promises to transform the way synthetic chemistry is performed. The intermolecular amination of C-H bonds represents a particularly desirable and challenging transformation for which no efficient, highly selective, and renewable catalysts exist. Here we report the directed evolution of an iron-containing enzymatic catalyst—based on a cytochrome P450 monooxygenase—for the highly enantioselective intermolecular amination of benzylic C-H bonds. The biocatalyst is capable of up to 1,300 turnovers, exhibits excellent enantioselectivities, and provides access to valuable benzylic amines. Iron complexes are generally poor catalysts for C-H amination: in this catalyst, the enzyme's protein framework confers activity on an otherwise unreactive iron-haem cofactor.

  17. Precursor type affecting surface properties and catalytic activity of sulfated zirconia

    Directory of Open Access Journals (Sweden)

    Zarubica Aleksandra R.

    2007-01-01

    Full Text Available Zirconium-hydroxide precursor samples are synthesized from Zr-hydroxide, Zr-nitrate, and Zr-alkoxide, by precipitation/impregnation, as well as by a modified sol-gel method. Precursor samples are further sulphated for the intended SO4 2- content of 4 wt.%, and calcined at 500-700oC. Differences in precursors’ origin and calcination temperature induce the incorporation of SO4 2- groups into ZrO2 matrices by various mechanisms. As a result, different amounts of residual sulphates are coupled with other structural, as well as surface properties, resulting in various catalytic activities of sulphated zirconia samples. Catalyst activity and selectivity are a complex synergistic function of tetragonal phase fraction, sulphates contents, textural and surface characteristics. Superior activity of SZ of alkoxide origin can be explained by a beneficial effect of meso-pores owing to a better accommodation of coke deposits.

  18. Effect of citrate on Aspergillus niger phytase adsorption and catalytic activity in soil

    Science.gov (United States)

    Mezeli, Malika; Menezes-Blackburn, Daniel; Zhang, Hao; Giles, Courtney; George, Timothy; Shand, Charlie; Lumsdon, David; Cooper, Patricia; Wendler, Renate; Brown, Lawrie; Stutter, Marc; Blackwell, Martin; Darch, Tegan; Wearing, Catherine; Haygarth, Philip

    2015-04-01

    Current developments in cropping systems that promote mobilisation of phytate in agricultural soils, by exploiting plant-root exudation of phytase and organic acids, offer potential for developments in sustainable phosphorus use. However, phytase adsorption to soil particles and phytate complexion has been shown to inhibit phytate dephosphorylation, thereby inhibiting plant P uptake, increasing the risk of this pool contributing to diffuse pollution and reducing the potential benefits of biotechnologies and management strategies aimed to utilise this abundant reserve of 'legacy' phosphorus. Citrate has been seen to increase phytase catalytic efficiency towards complexed forms of phytate, but the mechanisms by which citrate promotes phytase remains poorly understood. In this study, we evaluated phytase (from Aspergillus niger) inactivation, and change in catalytic properties upon addition to soil and the effect citrate had on adsorption of phytase and hydrolysis towards free, precipitated and adsorbed phytate. A Langmuir model was fitted to phytase adsorption isotherms showing a maximum adsorption of 0.23 nKat g-1 (19 mg protein g-1) and affinity constant of 435 nKat gˉ1 (8.5 mg protein g-1 ), demonstrating that phytase from A.niger showed a relatively low affinity for our test soil (Tayport). Phytases were partially inhibited upon adsorption and the specific activity was of 40.44 nKat mgˉ1 protein for the free enzyme and 25.35 nKat mgˉ1 protein when immobilised. The kinetics of adsorption detailed that most of the adsorption occurred within the first 20 min upon addition to soil. Citrate had no effect on the rate or total amount of phytase adsorption or loss of activity, within the studied citrate concentrations (0-4mM). Free phytases in soil solution and phytase immobilised on soil particles showed optimum activity (>80%) at pH 4.5-5.5. Immobilised phytase showed greater loss of activity at pH levels over 5.5 and lower activities at the secondary peak at pH 2

  19. Catalytic activity of phosphoric acid impregnated as a thin layer on quartz

    Energy Technology Data Exchange (ETDEWEB)

    Obraztosv, P.A. (Inst. Chem. Phys. Acad. Sci., USSR); Vinnik, M.I.; Batalin, O.E.

    1978-05-01

    The catalytic activity of phosphoric acid impregnated as a thin layer on quartz was studied in tert.-butanol dehydration at 100/sup 0/C by a pulse chromatographic method, and it was shown that the activity of the catalyst was due only to the free H/sub 3/PO/sub 4/, and that the observed gradual deactivation of the catalyst was caused by loss of the acid due to its interaction with quartz, with the formation of an SiO/sub 2/-P/sub 2/O/sub 5/ complex. Catalyst samples thermally pretreated for 5-7 hr at 330/sup 0/C conserved high activity for over 205 hr, and contained only ortho- but no meta- or pyrophosphoric acid.

  20. Molecular dynamics characterization of five pathogenic factor X mutants associated with decreased catalytic activity

    KAUST Repository

    Abdel-Azeim, Safwat

    2014-11-11

    Factor X (FX) is one of the major players in the blood coagulation cascade. Upon activation to FXa, it converts prothrombin to thrombin, which in turn converts fibrinogen into fibrin (blood clots). FXa deficiency causes hemostasis defects, such as intracranial bleeding, hemathrosis, and gastrointestinal blood loss. Herein, we have analyzed a pool of pathogenic mutations, located in the FXa catalytic domain and directly associated with defects in enzyme catalytic activity. Using chymotrypsinogen numbering, they correspond to D102N, T135M, V160A, G184S, and G197D. Molecular dynamics simulations were performed for 1.68 μs on the wild-type and mutated forms of FXa. Overall, our analysis shows that four of the five mutants considered, D102N, T135M, V160A, and G184S, have rigidities higher than those of the wild type, in terms of both overall protein motion and, specifically, subpocket S4 flexibility, while S1 is rather insensitive to the mutation. This acquired rigidity can clearly impact the substrate recognition of the mutants.

  1. Peroxidase-like catalytic activities of ionic metalloporphyrins supported on functionalised polystyrene surface

    Indian Academy of Sciences (India)

    Mikki V Vinodu; M Padmanabhan

    2001-02-01

    Metalloderivatives of anionic tetrasulphonated tetraphenylporphyrin (MTPPS, M = Mn(III), Fe(III) and Co(III)) were synthesized and immobilized on cationically functionalised divinylbenzene(DVB)-crosslinked polystyrene(PS). These supported catalysts (PS-MTPPS) were found to exhibit peroxidase-like activity. The co-oxidation of 4-aminoantipyrine and phenol by H2O2 was attempted with these catalysts to mimic this enzyme function. The catalytic efficiency of all these immobilized MTPPS was found to be superior to the corresponding unsupported MTPPS in solution. The effect of the central metal ion of the porphyrin, H of the reaction medium and also the temperature effect are investigated. The ideal H was seen to be in the 8 0-8 5 range, with maximum effect at 8 2. The efficiency order for the various PS-MTPPS was seen to be Co>Mn>Fe, with CoTPPS showing efficiency comparable to that of horseradish peroxidase. The catalytic efficiency was found to be increasing with temperature for all the catalysts. The re-usability of these PS-MTPPS systems for peroxidase-like activity was also studied and it was found that they exhibited a very high degree of recyclability without much poisoning.

  2. The AMP-activated protein kinase α2 catalytic subunit controls whole-body insulin sensitivity

    Science.gov (United States)

    Viollet, Benoit; Andreelli, Fabrizio; Jørgensen, Sebastian B.; Perrin, Christophe; Geloen, Alain; Flamez, Daisy; Mu, James; Lenzner, Claudia; Baud, Olivier; Bennoun, Myriam; Gomas, Emmanuel; Nicolas, Gaël; Wojtaszewski, Jørgen F.P.; Kahn, Axel; Carling, David; Schuit, Frans C.; Birnbaum, Morris J.; Richter, Erik A.; Burcelin, Rémy; Vaulont, Sophie

    2003-01-01

    AMP-activated protein kinase (AMPK) is viewed as a fuel sensor for glucose and lipid metabolism. To better understand the physiological role of AMPK, we generated a knockout mouse model in which the AMPKα2 catalytic subunit gene was inactivated. AMPKα2–/– mice presented high glucose levels in the fed period and during an oral glucose challenge associated with low insulin plasma levels. However, in isolated AMPKα2–/– pancreatic islets, glucose- and L-arginine–stimulated insulin secretion were not affected. AMPKα2–/– mice have reduced insulin-stimulated whole-body glucose utilization and muscle glycogen synthesis rates assessed in vivo by the hyperinsulinemic euglycemic clamp technique. Surprisingly, both parameters were not altered in mice expressing a dominant-negative mutant of AMPK in skeletal muscle. Furthermore, glucose transport was normal in incubated isolated AMPKα2–/– muscles. These data indicate that AMPKα2 in tissues other than skeletal muscles regulates insulin action. Concordantly, we found an increased daily urinary catecholamine excretion in AMPKα2–/– mice, suggesting altered function of the autonomic nervous system that could explain both the impaired insulin secretion and insulin sensitivity observed in vivo. Therefore, extramuscular AMPKα2 catalytic subunit is important for whole-body insulin action in vivo, probably through modulation of sympathetic nervous activity. PMID:12511592

  3. The AMP-activated protein kinase alpha2 catalytic subunit controls whole-body insulin sensitivity.

    Science.gov (United States)

    Viollet, Benoit; Andreelli, Fabrizio; Jørgensen, Sebastian B; Perrin, Christophe; Geloen, Alain; Flamez, Daisy; Mu, James; Lenzner, Claudia; Baud, Olivier; Bennoun, Myriam; Gomas, Emmanuel; Nicolas, Gaël; Wojtaszewski, Jørgen F P; Kahn, Axel; Carling, David; Schuit, Frans C; Birnbaum, Morris J; Richter, Erik A; Burcelin, Rémy; Vaulont, Sophie

    2003-01-01

    AMP-activated protein kinase (AMPK) is viewed as a fuel sensor for glucose and lipid metabolism. To better understand the physiological role of AMPK, we generated a knockout mouse model in which the AMPKalpha2 catalytic subunit gene was inactivated. AMPKalpha2(-/-) mice presented high glucose levels in the fed period and during an oral glucose challenge associated with low insulin plasma levels. However, in isolated AMPKalpha2(-/-) pancreatic islets, glucose- and L-arginine-stimulated insulin secretion were not affected. AMPKalpha2(-/-) mice have reduced insulin-stimulated whole-body glucose utilization and muscle glycogen synthesis rates assessed in vivo by the hyperinsulinemic euglycemic clamp technique. Surprisingly, both parameters were not altered in mice expressing a dominant-negative mutant of AMPK in skeletal muscle. Furthermore, glucose transport was normal in incubated isolated AMPKalpha2(-/-) muscles. These data indicate that AMPKalpha2 in tissues other than skeletal muscles regulates insulin action. Concordantly, we found an increased daily urinary catecholamine excretion in AMPKalpha2(-/-) mice, suggesting altered function of the autonomic nervous system that could explain both the impaired insulin secretion and insulin sensitivity observed in vivo. Therefore, extramuscular AMPKalpha2 catalytic subunit is important for whole-body insulin action in vivo, probably through modulation of sympathetic nervous activity.

  4. Generation 9 polyamidoamine dendrimer encapsulated platinum nanoparticle mimics catalase size, shape, and catalytic activity.

    Science.gov (United States)

    Wang, Xinyu; Zhang, Yincong; Li, Tianfu; Tian, Wende; Zhang, Qiang; Cheng, Yiyun

    2013-04-30

    Poly(amidoamine) (PAMAM) encapsulated platinum nanoparticles were synthesized and used as catalase mimics. Acetylated generation 9 (Ac-G9) PAMAM dendrimer with a molecular size around 10 nm was used as a template to synthesize platinum nanoparticles. The feeding molar ratio of Pt(4+) and Ac-G9 is 2048, and the synthesized platinum nanoparticle (Ac-G9/Pt NP) has an average size of 3.3 nm. Ac-G9/Pt NP has a similar molecular size and globular shape with catalase (~11 nm). The catalytic activity of Ac-G9/Pt NP on the decomposition of H2O2 is approaching that of catalase at 37 °C. Ac-G9/Pt NP shows differential response to the changes of pH and temperature compared with catalase, which can be explained by different catalytic mechanisms of Ac-G9/Pt NP and catalase. Ac-G9/Pt NP also shows horseradish peroxidase activity and is able to scavenge free radicals such as di(phenyl)-(2,4,6-trinitrophenyl)iminoazanium (DPPH). Furthermore, Ac-G9/Pt NP shows excellent biocompatibility on different cell lines and can down-regulate H2O2-induced intracellular reactive oxygen species (ROS) in these cells. These results suggest that dendrimers are promising mimics of proteins with different sizes and Ac-G9/Pt NP can be used as an alternative candidate of catalase to decrease oxidation stress in cells.

  5. Prominent catalytic activity of mesoporous molecular sieves in the vapor phase dehydration of cyclohexanol to cyclohexene

    Institute of Scientific and Technical Information of China (English)

    Azhagapillai Prabhu; Ahmed Al Shoaibi; Chandrasekar Srinivasakannan; Muthaiahpillai Palanichamy; Velayutham Murugesan

    2013-01-01

    Cerium incorporated KIT-6 mesoporous materials were synthesized through direct hydrothermal method and characterized by using X-ray diffraction (XRD),nitrogen sorption isotherm (BET),Fourier transform infrared spectroscopy (FT-IR),inductively coupled plasma-atomic emission spectroscopy (ICP-AES),diffuse reflectance ultraviolet visible spectroscopy (DRS-UV-Vis),thermogravimetric analysis (TGA),scanning electron microscopy (SEM) and transmission electron microscopy (TEM) methods.It appeared that stable cerium ions were inserted into the silica framework of KIT-6,thus generating acid properties in their host materials.The catalytic activity of Ce-KIT-6 materials was evaluated in the vapor phase dehydration of cyclohexanol to cyclohexene and dicyclohexyl ether at different temperatures with various Si/Ce molar ratios.Ce-KIT-6 (25) showed higher activity with 54% cyclohexanol conversion and 64% selectivity to cyclohexene.The catalytic results indicated that Ce-KIT-6 mesoporous materials could be used as versatile and stable acid catalysts.

  6. Controllable preparation of CeO2 nanostructure materials and their catalytic activity

    Institute of Scientific and Technical Information of China (English)

    Shan Wenjuan; Guo Hongjuan; Liu Chang; Wang Xiaonan

    2012-01-01

    Well-crystalline CeO2 nanostructures with the morphology ofnanorods and nanocubes were synthesized by a template-free hydrothermal method.X-ray diffraction (XRD),transmission electron microscopy (TEM),Brunauer-Emmett-Teller (BET) nitrogen adsorption-desorption measurements were employed to characterize the synthesized materials.The reducibility and catalytic activity of nanostructured CeO2 were examined by hydrogen temperature-programmed reduction (H2-TPR) and CO oxidation.The results showed that CeO2 nanorods could be converted into CeO2 nanocubes with the increasing of the reaction time and the hydrothermal temperature,CeO2 nanorods became longer gradually with the increasing of the concentrations of NaOH.H2-TPR characterization demonstrated that the intense low-temperature reduction peak in the CeO2 nanorods indicated the amount of hydrogen consumed is larger than CeO2 nanocubes.Meantime the CeO2 nanorods enhanced catalytic activity for CO oxidation,the total conversion temperature was 340 ℃.The reasons were that CeO2 nanorods have much smaller crystalline sizes and higher surface areas than CeO2 nanocubes.

  7. Support-shape Dependent Catalytic Activity in Pt/alumina Systems Using USANS/SANS

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sang Hoon; Han, Sugyeong; Ha, Heonphil; Byun, Jiyoung; Kim, Man-ho [KIST, Seoul (Korea, Republic of)

    2015-10-15

    Pt nanoparticles dispersed on ceramic powder such as alumina and ceria powder are used as catalyst materials to reduce pollution from automobile exhaust, power plant exhaust, etc. Much effort has been put to investigate the relationship between types of catalyst support materials and reactivity of the supported metallic particles. The surface shape of support materials can also be expected to control the catalysts size with the surface shape of support materials. In this presentation, we show our SANS (small angle neutron scattering) -USANS (ultra small angle neutron scattering) analysis on the structural differences of different shapes of the same γ alumina powder with different loadings of Pt nanoparticles. Then, the reactivity of the prepared catalyst materials are presented and discussed based on the investigation of the structure of the support materials by SANS. The shapes of gamma alumina, rod-like or plate-like shape, were determined from nanometer to micrometer with USANS and SANS analysis. We found that the platelet-like alumina consists of an aggregate of 2 - 3 layers, which further reduce specific surface area and catalytic activity compared to rod-like shape. Rod-like shape shows more than 100% enhancement in the catalytic activities in model three-way-catalyst (TWC) reactions of CO, NO, and C{sub 3}H{sub 6} at low temperature around 200 .deg. C.

  8. Emergence of a catalytic tetrad during evolution of a highly active artificial aldolase

    Science.gov (United States)

    Obexer, Richard; Godina, Alexei; Garrabou, Xavier; Mittl, Peer R. E.; Baker, David; Griffiths, Andrew D.; Hilvert, Donald

    2017-01-01

    Designing catalysts that achieve the rates and selectivities of natural enzymes is a long-standing goal in protein chemistry. Here, we show that an ultrahigh-throughput droplet-based microfluidic screening platform can be used to improve a previously optimized artificial aldolase by an additional factor of 30 to give a >109 rate enhancement that rivals the efficiency of class I aldolases. The resulting enzyme catalyses a reversible aldol reaction with high stereoselectivity and tolerates a broad range of substrates. Biochemical and structural studies show that catalysis depends on a Lys-Tyr-Asn-Tyr tetrad that emerged adjacent to a computationally designed hydrophobic pocket during directed evolution. This constellation of residues is poised to activate the substrate by Schiff base formation, promote mechanistically important proton transfers and stabilize multiple transition states along a complex reaction coordinate. The emergence of such a sophisticated catalytic centre shows that there is nothing magical about the catalytic activities or mechanisms of naturally occurring enzymes, or the evolutionary process that gave rise to them.

  9. Electrochemical, catalytic and antimicrobial activity of N-functionalized tetraazamacrocyclic binuclear nickel(II) complexes

    Science.gov (United States)

    Prabu, R.; Vijayaraj, A.; Suresh, R.; Shenbhagaraman, R.; Kaviyarasan, V.; Narayanan, V.

    2011-02-01

    The five binuclear nickel(II) complexes have been synthesized by the Schiff base condensation of 1,8-[bis(3-formyl-2-hydroxy-5-methyl)benzyl]-l,4,8,11-tetraazacyclo-tetradecane (PC) with appropriate aliphatic diamines and nickel(II) perchlorate. All the five complexes were characterized by elemental and spectral analysis. The electronic spectra of the complexes show three d-d transition in the range of 550-1055 nm due to 3A 2g → 3T 2g(F), 3A 2g → 3T 1g(F) and 3A 2g → 3T 1g(P). These spin allowed electronic transitions are characteristic of an octahedral Ni 2+ center. Electrochemical studies of the complexes show two irreversible one electron reduction waves at cathodic region. The reduction potential of the complexes shifts towards anodically upon increasing the chain length of the macrocyclic ring. All the nickel(II) complexes show two irreversible one electron oxidation waves at anodic region. The oxidation potential of the complexes shift towards anodically upon increasing the chain length of the macrocyclic ring. The catalytic activities of the complexes were observed to be increase with increase the macrocyclic ring size. The observed rate constant values for the catalytic hydrolysis of 4-nitrophenyl phosphate are in the range of 5.85 × 10 -3 to 9.14 × 10 -3 min -1. All the complexes were screened for antimicrobial activity.

  10. Activities of human RRP6 and structure of the human RRP6 catalytic domain

    Energy Technology Data Exchange (ETDEWEB)

    Januszyk, Kurt; Liu, Quansheng; Lima, Christopher D. (SKI)

    2011-08-29

    The eukaryotic RNA exosome is a highly conserved multi-subunit complex that catalyzes degradation and processing of coding and noncoding RNA. A noncatalytic nine-subunit exosome core interacts with Rrp44 and Rrp6, two subunits that possess processive and distributive 3'-to-5' exoribonuclease activity, respectively. While both Rrp6 and Rrp44 are responsible for RNA processing in budding yeast, Rrp6 may play a more prominent role in processing, as it has been demonstrated to be inhibited by stable RNA secondary structure in vitro and because the null allele in budding yeast leads to the buildup of specific structured RNA substrates. Human RRP6, otherwise known as PM/SCL-100 or EXOSC10, shares sequence similarity to budding yeast Rrp6 and is proposed to catalyze 3'-to-5' exoribonuclease activity on a variety of nuclear transcripts including ribosomal RNA subunits, RNA that has been poly-adenylated by TRAMP, as well as other nuclear RNA transcripts destined for processing and/or destruction. To characterize human RRP6, we expressed the full-length enzyme as well as truncation mutants that retain catalytic activity, compared their activities to analogous constructs for Saccharomyces cerevisiae Rrp6, and determined the X-ray structure of a human construct containing the exoribonuclease and HRDC domains that retains catalytic activity. Structural data show that the human active site is more exposed when compared to the yeast structure, and biochemical data suggest that this feature may play a role in the ability of human RRP6 to productively engage and degrade structured RNA substrates more effectively than the analogous budding yeast enzyme.

  11. Photo-catalytic activities of plant hormones on semiconductor nanoparticles by laser-activated electron tunneling and emitting.

    Science.gov (United States)

    Tang, Xuemei; Huang, Lulu; Zhang, Wenyang; Jiang, Ruowei; Zhong, Hongying

    2015-01-01

    Understanding of the dynamic process of laser-induced ultrafast electron tunneling is still very limited. It has been thought that the photo-catalytic reaction of adsorbents on the surface is either dependent on the number of resultant electron-hole pairs where excess energy is lost to the lattice through coupling with phonon modes, or dependent on irradiation photon wavelength. We used UV (355 nm) laser pulses to excite electrons from the valence band to the conduction band of titanium dioxide (TiO₂), zinc oxide (ZnO) and bismuth cobalt zinc oxide (Bi₂O₃)₀.₀₇(CoO)₀.₀₃(ZnO)₀.₉ semiconductor nanoparticles with different photo catalytic properties. Photoelectrons are extracted, accelerated in a static electric field and eventually captured by charge deficient atoms of adsorbed organic molecules. A time-of-flight mass spectrometer was used to detect negative molecules and fragment ions generated by un-paired electron directed bond cleavages. We show that the probability of electron tunneling is determined by the strength of the static electric field and intrinsic electron mobility of semiconductors. Photo-catalytic dissociation or polymerization reactions of adsorbents are highly dependent on the kinetic energy of tunneling electrons as well as the strength of laser influx. By using this approach, photo-activities of phytohormones have been investigated.

  12. Photo-catalytic Activities of Plant Hormones on Semiconductor Nanoparticles by Laser-Activated Electron Tunneling and Emitting

    Science.gov (United States)

    Tang, Xuemei; Huang, Lulu; Zhang, Wenyang; Jiang, Ruowei; Zhong, Hongying

    2015-03-01

    Understanding of the dynamic process of laser-induced ultrafast electron tunneling is still very limited. It has been thought that the photo-catalytic reaction of adsorbents on the surface is either dependent on the number of resultant electron-hole pairs where excess energy is lost to the lattice through coupling with phonon modes, or dependent on irradiation photon wavelength. We used UV (355 nm) laser pulses to excite electrons from the valence band to the conduction band of titanium dioxide (TiO2), zinc oxide (ZnO) and bismuth cobalt zinc oxide (Bi2O3)0.07(CoO)0.03(ZnO)0.9 semiconductor nanoparticles with different photo catalytic properties. Photoelectrons are extracted, accelerated in a static electric field and eventually captured by charge deficient atoms of adsorbed organic molecules. A time-of-flight mass spectrometer was used to detect negative molecules and fragment ions generated by un-paired electron directed bond cleavages. We show that the probability of electron tunneling is determined by the strength of the static electric field and intrinsic electron mobility of semiconductors. Photo-catalytic dissociation or polymerization reactions of adsorbents are highly dependent on the kinetic energy of tunneling electrons as well as the strength of laser influx. By using this approach, photo-activities of phytohormones have been investigated.

  13. Metal-Free sp(2)-C-H Borylation as a Common Reactivity Pattern of Frustrated 2-Aminophenylboranes.

    Science.gov (United States)

    Chernichenko, Konstantin; Lindqvist, Markus; Kótai, Bianka; Nieger, Martin; Sorochkina, Kristina; Pápai, Imre; Repo, Timo

    2016-04-13

    C-H borylation is a powerful and atom-efficient method for converting affordable and abundant chemicals into versatile organic reagents used in the production of fine chemicals and functional materials. Herein we report a facile C-H borylation of aromatic and olefinic C-H bonds with 2-aminophenylboranes. Computational and experimental studies reveal that the metal-free C-H insertion proceeds via a frustrated Lewis pair mechanism involving heterolytic splitting of the C-H bond by cooperative action of the amine and boryl groups. The adapted geometry of the reactive B and N centers results in an unprecedentently low kinetic barrier for both insertion into the sp(2)-C-H bond and intramolecular protonation of the sp(2)-C-B bond in 2-ammoniophenyl(aryl)- or -(alkenyl)borates. This common reactivity pattern serves as a platform for various catalytic reactions such as C-H borylation and hydrogenation of alkynes. In particular, we demonstrate that simple 2-aminopyridinium salts efficiently catalyze the C-H borylation of hetarenes with catecholborane. This reaction is presumably mediated by a borenium species isoelectronic to 2-aminophenylboranes.

  14. Mutation in aspartic acid residues modifies catalytic and haemolytic activities of Bacillus cereus sphingomyelinase.

    Science.gov (United States)

    Tamura, H; Tameishi, K; Yamada, A; Tomita, M; Matsuo, Y; Nishikawa, K; Ikezawa, H

    1995-01-01

    Four aspartic acid residues (Asp126, Asp156, Asp233 and Asp295) of Bacillus cereus sphingomyelinase (SMase) in the conservative regions were changed to glycine by in vitro mutagenesis, and the mutant SMases [D126G (Asp126-->Gly etc.), D156G, D233G and D295G] were produced in Bacillus brevis 47, a protein-producing strain. The sphingomyelin (SM)-hydrolysing activity of D295G was completely abolished and those of D126G and D156G were reduced by more than 80%, whereas that of D233G was not so profoundly affected. Two mutant enzymes (D126G and D156G) were purified and characterized further. The hydrolytic activities of D126G and D156G toward four phosphocholine-containing substrates with different hydrophobicities, SM, 2-hexadecanoylamino-4-nitrophenylphosphocholine(HNP), lysophosphatidylcholine (lysoPC) and p-nitro-phenylphosphocholine (p-NPPC), were compared with those of the wild-type. The activity of D126G toward water-soluble p-NPPC was comparable with that of the wild-type. On the other hand, D156G catalysed the hydrolysis of hydrophilic substrates such as HNP and p-NPPC more efficiently (> 4-fold) than the wild-type. These results suggested that Asp126 and Asp156, located in the highly conserved region, may well be involved in a substrate recognition process rather than catalytic action. Haemolytic activities of the mutant enzymes were found to be parallel with their SM-hydrolysing activities. Two regions, including the C-terminal region containing Asp295, were found to show considerable sequence identity with the corresponding regions of bovine pancreatic DNase I. Structural predictions indicated structural similarity between SMase and DNase I. An evolutionary relationship based on the catalytic function was suggested between the structures of these two phosphodiesterases. Images Figure 2 Figure 3 Figure 4 Figure 6 PMID:7639690

  15. Molecular basis of reduced pyridoxine 5'-phosphate oxidase catalytic activity in neonatal epileptic encephalopathy disorder.

    Science.gov (United States)

    Musayev, Faik N; Di Salvo, Martino L; Saavedra, Mario A; Contestabile, Roberto; Ghatge, Mohini S; Haynes, Alexina; Schirch, Verne; Safo, Martin K

    2009-11-06

    Mutations in pyridoxine 5'-phosphate oxidase are known to cause neonatal epileptic encephalopathy. This disorder has no cure or effective treatment and is often fatal. Pyridoxine 5'-phosphate oxidase catalyzes the oxidation of pyridoxine 5'-phosphate to pyridoxal 5'-phosphate, the active cofactor form of vitamin B(6) required by more than 140 different catalytic activities, including enzymes involved in amino acid metabolism and biosynthesis of neurotransmitters. Our aim is to elucidate the mechanism by which a homozygous missense mutation (R229W) in the oxidase, linked to neonatal epileptic encephalopathy, leads to reduced oxidase activity. The R229W variant is approximately 850-fold less efficient than the wild-type enzyme due to an approximately 192-fold decrease in pyridoxine 5'-phosphate affinity and an approximately 4.5-fold decrease in catalytic activity. There is also an approximately 50-fold reduction in the affinity of the R229W variant for the FMN cofactor. A 2.5 A crystal structure of the R229W variant shows that the substitution of Arg-229 at the FMN binding site has led to a loss of hydrogen-bond and/or salt-bridge interactions between FMN and Arg-229 and Ser-175. Additionally, the mutation has led to an alteration of the configuration of a beta-strand-loop-beta-strand structure at the active site, resulting in loss of two critical hydrogen-bond interactions involving residues His-227 and Arg-225, which are important for substrate binding and orientation for catalysis. These results provide a molecular basis for the phenotype associated with the R229W mutation, as well as providing a foundation for understanding the pathophysiological consequences of pyridoxine 5'-phosphate oxidase mutations.

  16. Remediation of actual groundwater polluted with nitrate by the catalytic reduction over copper-palladium supported on active carbon

    OpenAIRE

    Wang, Yi; Sakamoto, Yoshinori; Kamiya, Yuichi

    2009-01-01

    Catalytic reduction of nitrate (NO3-) in groundwater over a Cu-Pd catalyst supported on active carbon was investigated in a gas-liquid co-current flow system at 298 K. Although Cu-Pd/active carbon, in which the Cu/Pd molar ratio was more than 0.66, showed high activity, high selectivity for the formation of N2 and N2O (98%), and high durability for the reduction of 100 ppm NO3- in distilled water, the catalytic performance decreased during the reduction of NO3- in groundwater. The catalyst al...

  17. Direct access to pyrazolo(benzo)thienoquinolines. Highly effective palladium catalysts for the intramolecular C-H heteroarylation of arenes.

    Science.gov (United States)

    Churruca, Fátima; Hernández, Susana; Perea, María; SanMartin, Raul; Domínguez, Esther

    2013-02-18

    A short and atom-efficient strategy to obtain a series of pyrazolo(benzo)thienoquinolines is developed. Alternative catalytic systems for the key intramolecular direct heteroarylation of arenes are presented and include the first example of C-H (hetero)arylation of (hetero)arenes catalyzed by very low catalyst loadings of a palladium source.

  18. Direct sp(3)C-H acroleination of N-aryl-tetrahydroisoquinolines by merging photoredox catalysis with nucleophilic catalysis.

    Science.gov (United States)

    Feng, Zhu-Jia; Xuan, Jun; Xia, Xu-Dong; Ding, Wei; Guo, Wei; Chen, Jia-Rong; Zou, You-Quan; Lu, Liang-Qiu; Xiao, Wen-Jing

    2014-04-07

    Sequence catalysis merging photoredox catalysis (PC) and nucleophilic catalysis (NC) has been realized for the direct sp(3) C-H acroleination of N-aryl-tetrahydroisoquinoline (THIQ). The reaction was performed under very mild conditions and afforded products in 50-91% yields. A catalytic asymmetric variant was proved to be successful with moderate enantioselectivities (up to 83 : 17 er).

  19. Mutations in the catalytic loop HRD motif alter the activity and function of Drosophila Src64.

    Directory of Open Access Journals (Sweden)

    Taylor C Strong

    Full Text Available The catalytic loop HRD motif is found in most protein kinases and these amino acids are predicted to perform functions in catalysis, transition to, and stabilization of the active conformation of the kinase domain. We have identified mutations in a Drosophila src gene, src64, that alter the three HRD amino acids. We have analyzed the mutants for both biochemical activity and biological function during development. Mutation of the aspartate to asparagine eliminates biological function in cytoskeletal processes and severely reduces fertility, supporting the amino acid's critical role in enzymatic activity. The arginine to cysteine mutation has little to no effect on kinase activity or cytoskeletal reorganization, suggesting that the HRD arginine may not be critical for coordinating phosphotyrosine in the active conformation. The histidine to leucine mutant retains some kinase activity and biological function, suggesting that this amino acid may have a biochemical function in the active kinase that is independent of its side chain hydrogen bonding interactions in the active site. We also describe the phenotypic effects of other mutations in the SH2 and tyrosine kinase domains of src64, and we compare them to the phenotypic effects of the src64 null allele.

  20. Non-cell autonomous and non-catalytic activities of ATX in the developing brain

    Directory of Open Access Journals (Sweden)

    Raanan eGreenman

    2015-03-01

    Full Text Available The intricate formation of the cerebral cortex requires a well-coordinated series of events, which are regulated at the level of cell-autonomous and non-cell autonomous mechanisms. Whereas cell-autonomous mechanisms that regulate cortical development are well-studied, the non cell-autonomous mechanisms remain poorly understood. A non-biased screen allowed us to identify Autotaxin (ATX as a non cell-autonomous regulator of neural stem cell proliferation. ATX (also known as ENPP2 is best known to catalyze lysophosphatidic acid (LPA production. Our results demonstrate that ATX affects the localization and adhesion of neuronal progenitors in a cell autonomous and non-cell autonomous manner, and strikingly, this activity is independent from its catalytic activity in producing LPA.

  1. Gold-Loaded Polymeric Micelles with Temperature-Modulated Catalytic Activity

    Institute of Scientific and Technical Information of China (English)

    HU Na; SHI Dongjian; LI Jihang; LI Junfeng; CHEN Mingqing

    2015-01-01

    Four-armed amphiphilic block copolymers, polystyrene-b-poly(N-isopropylacrylamide) (PS-b-PNIPAM)4, were synthesized by atom transfer radical polymerization (ATRP). (PS-b-PNIPAM)4 self-assembled into micelles with PS block as core and thermoresponsive PNIPAM block as corona. The gold nanoparticles (Au NPs) with average diameter about 5.8 nm were immobilized on the surfaces of the micelles by the reduction of the corresponding ions. The micelle-supported gold nanoparticles (Au-micelles) were applied to catalyze the reduction ofp-nitrophenol. Moreover, the activity of the Au-micelle catalyst could be modulated by the temperature and the Au-micelles could be easily recovered by changing the temperature and recycled four times with high catalytic activity.

  2. Inhibition effect of graphene oxide on the catalytic activity of acetylcholinesterase enzyme.

    Science.gov (United States)

    Wang, Yong; Gu, Yao; Ni, Yongnian; Kokot, Serge

    2015-11-01

    Variations in the enzyme activity of acetylcholinesterase (AChE) in the presence of the nano-material, graphene oxide (GO), were investigated with the use of molecular spectroscopy UV-visible and fluorescence methods. From these studies, important kinetic parameters of the enzyme were extracted; these were the maximum reaction rate, Vm , and the Michaelis constant, Km . A comparison of these parameters indicated that GO inhibited the catalytic activity of the AChE because of the presence of the AChE-GO complex. The formation of this complex was confirmed with the use of fluorescence data, which was resolved with the use of the MCR-ALS chemometrics method. Furthermore, it was found that the resonance light-scattering (RLS) intensity of AChE changed in the presence of GO. On this basis, it was demonstrated that the relationship between AChE and GO was linear and such models were used for quantitative analyses of GO.

  3. LASER INDUCED SELECTIVE ACTIVATION UTILIZING AUTO-CATALYTIC ELECTROLESS PLATING ON POLYMER SURFACE

    DEFF Research Database (Denmark)

    Zhang, Yang; Nielsen, Jakob Skov; Tang, Peter Torben

    2009-01-01

    . Characterization of the deposited copper layer was used to select and improve laser parameters. Several types of polymers with different melting points were used as substrate. Using the above mentioned laser treatment, standard grades of thermoplastic materials such as ABS, SAN, PE, PC and others have been......This paper presents a new method for selective micro metallization of polymers induced by laser. An Nd: YAG laser was employed to draw patterns on polymer surfaces using a special set-up. After subsequent activation and auto-catalytic electroless plating, copper only deposited on the laser tracks....... Induced by the laser, porous and rough structures are formed on the surface, which favours the palladium attachment during the activation step prior to the metallization. Laser focus detection, scanning electron microscopy (SEM) and other instruments were used to analyze the topography of the laser track...

  4. Synthesis of 1-dodecanethiol-capped Ag nanoparticles and their high catalytic activity

    Science.gov (United States)

    Zhang, Danhui; Yang, Youbo

    2017-01-01

    Silver nanoparticles, which were produced by the borohydride reduction of silver nitrate, were stabilized by means of 1-dodecanethiol providing sulfur atom in two-phase system involving water and organic solvent (such as toluene, chloroform and hexane). Different organic solvent played a major role in the particle size of silver nanoparticles. These silver nanoparticles synthesized in the three different organic solvent were characterized by X-ray Diffraction, transmission electron microscopy and ultraviolet-visible absorption spectroscopy. The results indicate that the particles size of silver nanoparticles formed in three organic solvents was different. Furthermore, 1-dodecanethiol-capped silver nanoparticles were found to serve as effective catalysts to activate the reduction of 4-nitrophenol (4NP) in the presence of NaBH4, where the size of silver nanoparticles played the determining role in catalytic activity.

  5. Catalytic activity in individual cracking catalyst particles imaged throughout different life stages by selective staining

    Science.gov (United States)

    Buurmans, Inge L. C.; Ruiz-Martínez, Javier; Knowles, William V.; van der Beek, David; Bergwerff, Jaap A.; Vogt, Eelco T. C.; Weckhuysen, Bert M.

    2011-11-01

    Fluid catalytic cracking (FCC) is the major conversion process used in oil refineries to produce valuable hydrocarbons from crude oil fractions. Because the demand for oil-based products is ever increasing, research has been ongoing to improve the performance of FCC catalyst particles, which are complex mixtures of zeolite and binder materials. Unfortunately, there is limited insight into the distribution and activity of individual zeolitic domains at different life stages. Here we introduce a staining method to visualize the structure of zeolite particulates and other FCC components. Brønsted acidity maps have been constructed at the single particle level from fluorescence microscopy images. By applying a statistical methodology to a series of catalysts deactivated via industrial protocols, a correlation is established between Brønsted acidity and cracking activity. The generally applicable method has clear potential for catalyst diagnostics, as it determines intra- and interparticle Brønsted acidity distributions for industrial FCC materials.

  6. Stellated Ag-Pt bimetallic nanoparticles: An effective platform for catalytic activity tuning

    Science.gov (United States)

    Liu, Hui; Ye, Feng; Yao, Qiaofeng; Cao, Hongbin; Xie, Jianping; Lee, Jim Yang; Yang, Jun

    2014-01-01

    The usefulness of Pt-based nanomaterials for catalysis can be greatly enhanced by coupling morphology engineering to the strategic presence of a second or even third metal. Here we demonstrate the design and preparation of stellated Ag-Pt bimetallic nanoparticles where significant activity difference between the methanol oxidation reaction (MOR) and the oxygen reduction reaction (ORR) may be realized by relegating Ag to the core or by hollowing out the core. In particular the stellated Pt surface, with an abundance of steps, edges, corner atoms, and {111} facets, is highly effective for the ORR but is ineffective for MOR. MOR activity is only observed in the presence of a Ag core through electronic coupling to the stellated Pt shell. The bimetallic Ag-Pt stellates therefore demonstrate the feasibility of tuning a Pt surface for two very different structure sensitive catalytic reactions. Stellated bimetallics may therefore be an effective platform for highly tunable catalyst designs. PMID:24495979

  7. Strong and coverage-independent promotion of catalytic activity of a noble metal by subsurface vanadium

    Science.gov (United States)

    Reichl, Wolfgang; Hayek, Konrad

    2003-07-01

    While common bimetallic surfaces have a variable composition, the stable subsurface alloys of V/Rh and V/Pd are characterised by a purely noble metal-terminated surface and the second metal positioned in near-surface layers. The uniform composition of the topmost surface layer excludes conventional ensemble effects in catalysis, and the activity of the surface can be controlled by the metal loading and by the temperature of annealing. For example, the activity of a polycrystalline Rh surface in CO hydrogenation is significantly increased by promotion with subsurface vanadium. The modification of the subsurface layer with a different metal must be considered a promising approach to improve the catalytic properties of a metal surface.

  8. The Origin of the Catalytic Activity of a Metal Hydride in CO2 Reduction.

    Science.gov (United States)

    Kato, Shunsuke; Matam, Santhosh Kumar; Kerger, Philipp; Bernard, Laetitia; Battaglia, Corsin; Vogel, Dirk; Rohwerder, Michael; Züttel, Andreas

    2016-05-10

    Atomic hydrogen on the surface of a metal with high hydrogen solubility is of particular interest for the hydrogenation of carbon dioxide. In a mixture of hydrogen and carbon dioxide, methane was markedly formed on the metal hydride ZrCoHx in the course of the hydrogen desorption and not on the pristine intermetallic. The surface analysis was performed by means of time-of-flight secondary ion mass spectroscopy and near-ambient pressure X-ray photoelectron spectroscopy, for the in situ analysis. The aim was to elucidate the origin of the catalytic activity of the metal hydride. Since at the initial stage the dissociation of impinging hydrogen molecules is hindered by a high activation barrier of the oxidised surface, the atomic hydrogen flux from the metal hydride is crucial for the reduction of carbon dioxide and surface oxides at interfacial sites.

  9. Catalytic activity of Mn-substituted barium hexaaluminates for methane combustion

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The catalysts of hexaaluminate (BaMnxAl12-xO19-δ , x = 1.0, 2.0, 3.0, 4.0) to be used in methane combustion have been successfully synthesized by co-precipitation method and supercritical drying. The crystalline structure and surface area of catalyst were characterized by X-ray diffraction (XRD) and nitrogen adsorption analysis of BET method. BET analysis revealed that the preparing and drying method proposed here provides stable materials with higher surface area of 51.4 m2/g in comparison to materials prepared using conventional ambient drying method for BaMnxAl12?xO19-δ calcined at 1200℃ under oxygen. XRD analysis indicated that formation of a pure single phase BaMnxAl12-xO19-δ occurred up to x = 3 in the case of Mn-substituted barium hexaaluminates. Incorporation of Mn in excess leads to BaAl2O4 phase formation. As far as the valence state of Manganese ions was concerned, the introduced Mn ions were either divalent or trivalent. The first Mn ions were introduced in the matrix essentially as Mn2+ and only for BaMn3Al9O19-δ does manganese exist exclusively as Mn3+; the higher the Mn concen- tration, the higher the proportion of Mn3+. Catalytic activity for methane combustion has been measured for Mn-substituted barium hexaaluminates, light-off temperature was observed in the 512-624℃ range. The highest activity was obtained for catalysts containing 3 Mn ions per unit cell, which reveals that the BaMnxAl12-xO19-δ catalyst was a promising methane combustion catalyst with high activity and good thermal stability. Temperature programmed reduction (TPR) under hydrogen has been used to correlate the catalytic activity with the amount of easily reducible species.

  10. Synthesis of Water Dispersible and Catalytically Active Gold-Decorated Cobalt Ferrite Nanoparticles.

    Science.gov (United States)

    Silvestri, Alessandro; Mondini, Sara; Marelli, Marcello; Pifferi, Valentina; Falciola, Luigi; Ponti, Alessandro; Ferretti, Anna Maria; Polito, Laura

    2016-07-19

    Hetero-nanoparticles represent an important family of composite nanomaterials that in the past years are attracting ever-growing interest. Here, we report a new strategy for the synthesis of water dispersible cobalt ferrite nanoparticles (CoxFe3-xO4 NPs) decorated with ultrasmall (2-3 nm) gold nanoparticles (Au NPs). The synthetic procedure is based on the use of 2,3-meso-dimercaptosuccinic acid (DMSA), which plays a double role. First, it transfers cobalt ferrite NPs from the organic phase to aqueous media. Second, the DMSA reductive power promotes the in situ nucleation of gold NPs in proximity of the magnetic NP surface. Following this procedure, we achieved a water dispersible nanosystem (CoxFe3-xO4-DMSA-Au NPs) which combines the cobalt ferrite magnetic properties with the catalytic features of ultrasmall Au NPs. We showed that CoxFe3-xO4-DMSA-Au NPs act as an efficient nanocatalyst to reduce 4-nitrophenol to 4-aminophenol and that they can be magnetically recovered and recycled. It is noteworthy that such nanosystem is more catalytically active than Au NPs with equal size. Finally, a complete structural and chemical characterization of the hetero-NPs is provided.

  11. Effect of substrate (ZnO) morphology on enzyme immobilization and its catalytic activity

    Science.gov (United States)

    Zhang, Yan; Wu, Haixia; Huang, Xuelei; Zhang, Jingyan; Guo, Shouwu

    2011-07-01

    In this study, zinc oxide (ZnO) nanocrystals with different morphologies were synthesized and used as substrates for enzyme immobilization. The effects of morphology of ZnO nanocrystals on enzyme immobilization and their catalytic activities were investigated. The ZnO nanocrystals were prepared through a hydrothermal procedure using tetramethylammonium hydroxide as a mineralizing agent. The control on the morphology of ZnO nanocrystals was achieved by varying the ratio of CH3OH to H2O, which were used as solvents in the hydrothermal reaction system. The surface of as-prepared ZnO nanoparticles was functionalized with amino groups using 3-aminopropyltriethoxysilane and tetraethyl orthosilicate, and the amino groups on the surface were identified and calculated by FT-IR and the Kaiser assay. Horseradish peroxidase was immobilized on as-modified ZnO nanostructures with glutaraldehyde as a crosslinker. The results showed that three-dimensional nanomultipod is more appropriate for the immobilization of enzyme used further in catalytic reaction.

  12. Antibiotic Binding Drives Catalytic Activation of Aminoglycoside Kinase APH(2″)-Ia.

    Science.gov (United States)

    Caldwell, Shane J; Huang, Yue; Berghuis, Albert M

    2016-06-01

    APH(2″)-Ia is a widely disseminated resistance factor frequently found in clinical isolates of Staphylococcus aureus and pathogenic enterococci, where it is constitutively expressed. APH(2″)-Ia confers high-level resistance to gentamicin and related aminoglycosides through phosphorylation of the antibiotic using guanosine triphosphate (GTP) as phosphate donor. We have determined crystal structures of the APH(2″)-Ia in complex with GTP analogs, guanosine diphosphate, and aminoglycosides. These structures collectively demonstrate that aminoglycoside binding to the GTP-bound kinase drives conformational changes that bring distant regions of the protein into contact. These changes in turn drive a switch of the triphosphate cofactor from an inactive, stabilized conformation to a catalytically competent active conformation. This switch has not been previously reported for antibiotic kinases or for the structurally related eukaryotic protein kinases. This catalytic triphosphate switch presents a means by which the enzyme can curtail wasteful hydrolysis of GTP in the absence of aminoglycosides, providing an evolutionary advantage to this enzyme.

  13. Effect of substrate (ZnO morphology on enzyme immobilization and its catalytic activity

    Directory of Open Access Journals (Sweden)

    Huang Xuelei

    2011-01-01

    Full Text Available Abstract In this study, zinc oxide (ZnO nanocrystals with different morphologies were synthesized and used as substrates for enzyme immobilization. The effects of morphology of ZnO nanocrystals on enzyme immobilization and their catalytic activities were investigated. The ZnO nanocrystals were prepared through a hydrothermal procedure using tetramethylammonium hydroxide as a mineralizing agent. The control on the morphology of ZnO nanocrystals was achieved by varying the ratio of CH3OH to H2O, which were used as solvents in the hydrothermal reaction system. The surface of as-prepared ZnO nanoparticles was functionalized with amino groups using 3-aminopropyltriethoxysilane and tetraethyl orthosilicate, and the amino groups on the surface were identified and calculated by FT-IR and the Kaiser assay. Horseradish peroxidase was immobilized on as-modified ZnO nanostructures with glutaraldehyde as a crosslinker. The results showed that three-dimensional nanomultipod is more appropriate for the immobilization of enzyme used further in catalytic reaction.

  14. Green synthesis, characterization and catalytic activity of silver nanoparticles using Cassia auriculata flower extract separated fraction

    Science.gov (United States)

    Muthu, Karuppiah; Priya, Sethuraman

    2017-05-01

    Cassia auriculata L., the flower aqueous extract was fractionated by separating funnel using n-hexane (A1), chloroform (A2), ethyl acetate (A3) and triple distilled water (A4). The A4 fraction was concentrated and determined the presence of preliminary phytochemicals such as tannins, flavonoids, glycosides, carbohydrates and polyphenolic compounds. These phytochemical compounds acted as reducing as well as a stabilizing agent in the green synthesis of Ag NPs from aqueous silver ions. Initially, the colour change and UV-vis absorbance surface Plasmon resonance strong, wide band located at 435 nm has confirmed the synthesis of Ag NPs. The X-ray diffraction (XRD) pattern of Ag NPs shows a face-centered cubic crystal structure. The observed values were calculated by Debye-Scherrer equation to theoretical confirms the particle size of 18 nm. The surface morphology of Ag NPs was viewed by HRTEM, the particles are spherical and triangle shapes with sizes from 10 to 35 nm. Further, the Ag NPs was effective catalytic activity in the reduction of highly environmental polluted organic compounds of 4-nitrophenol and methyl orange. The green synthesis of Ag NPs seems to eco-friendly, cost-effective, conventional one spot synthesis and greater performance of catalytic degradation of environmentally polluted organic dyes.

  15. Enhancement of catalytic activity by increasing surface area in heterogeneous catalysis

    Science.gov (United States)

    Özkar, Saim

    2009-12-01

    The use of nanoclusters in systems with confined void spaces such as inside mesoporous or microporous solids appears to be an efficient way of preventing aggregation of nanoclusters in their catalytic application. Zeolite-Y is considered as a suitable host providing highly ordered supercages with a diameter of 1.3 nm. Intrazeolite metal(0) nanoclusters were prepared at room temperature by ion-exchange of metal cations with the extra framework Na + ions in Zeolite-Y, followed by the reduction of the metal cations in the cavities of Zeolite-Y with sodium borohydride in aqueous solution, whereby the Zeolite-Y is reloaded with Na + ions. Hence, host framework remains intact as shown by using a multi-prong approach. Intrazeolite transition-metal(0) nanoclusters were isolated by suction filtration and drying in vacuum at room temperature and characterized by a combination of analytical methods. Intrazeolite metal(0) nanoclusters were tested as catalyst in the hydrolysis of sodium borohydride and ammonia-borane, both of which have been considered as a promising hydrogen storage materials. High catalytic activity and the outstandingly long lifetime of intrazeolite transition-metal(0) nanoclusters catalyst in the hydrogen generation from the hydrolysis of both sodium borohydride and ammonia-borane is demonstrated. The results are attributed to the small size of the nanoclusters within the zeolite cages as well as prevention of agglomeration of the nanoclusters.

  16. Improving the catalytic activity of semiconductor nanocrystals through selective domain etching.

    Science.gov (United States)

    Khon, Elena; Lambright, Kelly; Khnayzer, Rony S; Moroz, Pavel; Perera, Dimuthu; Butaeva, Evgeniia; Lambright, Scott; Castellano, Felix N; Zamkov, Mikhail

    2013-05-01

    Colloidal chemistry offers an assortment of synthetic tools for tuning the shape of semiconductor nanocrystals. While many nanocrystal architectures can be obtained directly via colloidal growth, other nanoparticle morphologies require alternative processing strategies. Here, we show that chemical etching of colloidal nanoparticles can facilitate the realization of nanocrystal shapes that are topologically inaccessible by hot-injection techniques alone. The present methodology is demonstrated by synthesizing a two-component CdSe/CdS nanoparticle dimer, constructed in a way that both CdSe and CdS semiconductor domains are exposed to the external environment. This structural morphology is highly desirable for catalytic applications as it enables both reductive and oxidative reactions to occur simultaneously on dissimilar nanoparticle surfaces. Hydrogen production tests confirmed the improved catalytic activity of CdSe/CdS dimers, which was enhanced 3-4 times upon etching treatment. We expect that the demonstrated application of etching to shaping of colloidal heteronanocrystals can become a common methodology in the synthesis of charge-separating nanocrystals, leading to advanced nanoparticles architectures for applications in areas of photocatalysis, photovoltaics, and light detection.

  17. The stability and catalytic activity of W13@Pt42 core-shell structure

    Science.gov (United States)

    Huo, Jin-Rong; Wang, Xiao-Xu; Li, Lu; Cheng, Hai-Xia; Su, Yan-Jing; Qian, Ping

    2016-10-01

    This paper reports a study of the electronic properties, structural stability and catalytic activity of the W13@Pt42 core-shell structure using the First-principles calculations. The degree of corrosion of W13@Pt42 core-shell structure is simulated in acid solutions and through molecular absorption. The absorption energy of OH for this structure is lower than that for Pt55, which inhibits the poison effect of O containing intermediate. Furthermore we present the optimal path of oxygen reduction reaction catalyzed by W13@Pt42. Corresponding to the process of O molecular decomposition, the rate-limiting step of oxygen reduction reaction catalyzed by W13@Pt42 is 0.386 eV, which is lower than that for Pt55 of 0.5 eV. In addition by alloying with W, the core-shell structure reduces the consumption of Pt and enhances the catalytic efficiency, so W13@Pt42 has a promising perspective of industrial application.

  18. Green Synthesis of Smart Metal/Polymer Nanocomposite Particles and Their Tuneable Catalytic Activities

    Directory of Open Access Journals (Sweden)

    Noel Peter Bengzon Tan

    2016-03-01

    Full Text Available Herein we report a simple and green synthesis of smart Au and Ag@Au nanocomposite particles using poly(N-isopropylacrylamide/polyethyleneimine (PNIPAm/PEI core-shell microgels as dual reductant and templates in an aqueous system. The nanocomposite particles were synthesized through a spontaneous reduction of tetrachloroauric (III acid to gold nanoparticles at room temperature, and in situ encapsulation and stabilization of the resultant gold nanoparticles (AuNPs with amine-rich PEI shells. The preformed gold nanoparticles then acted as seed nanoparticles for further generation of Ag@Au bimetallic nanoparticles within the microgel templates at 60 °C. These nanocomposite particles were characterized by TEM, AFM, XPS, UV-vis spectroscopy, zeta-potential, and particle size analysis. The synergistic effects of the smart nanocomposite particles were studied via the reduction of p-nitrophenol to p-aminophenol. The catalytic performance of the bimetallic Ag@Au nanocomposite particles was 25-fold higher than that of the monometallic Au nanoparticles. Finally, the controllable catalytic activities of the Au@PNIPAm/PEI nanocomposite particles were demonstrated via tuning the solution pH and temperature.

  19. Synthesis and catalytic activity of metallo-organic complexes bearing 5-amino 2-ethylpyridine -2-carboximidate

    Indian Academy of Sciences (India)

    LUO MEI; XU JIA; ZHANG JING CHENG

    2016-06-01

    A series of copper, cobalt, nickel and manganese complexes were synthesized and characterized. Reaction of 5-amino-2-cyanopyridine with $ MCl_{2}$·x$H_{2}O$ (M: $Cu^{2+}$, $Co^{2+}$, $Ni^{2+}$, $Mn^{2+})$ in anhydrous ethanol resulted in the formation of four complexes $[NH_{2}EtPyCuCl_{2}(CH_{3}OH)].H_{2}O 1$, $[(NH_{2}EtPyHCl)_{3}Co]$$(Cl)_{3}.3H_{2}O 2$, $[(NH_{2}EtPy)_{2}$ 2$(H_{2}O)Ni]$ $(Cl_{2})$ 3, and $[(NH_{2}EtPy)_{2}$ 2$(H_{2}O)$ Mn]$(Cl_{2})$ 4 $[NH_{2} EtPy=5-amino-oethylpyridine-2-carboximidate], respectively. The structures of these compounds were determined by X-raydiffraction, NMR and IR spectroscopy, and elemental analysis. Each complex was then used as a catalyst in the Henry reaction, and its catalytic activity was determined by 1H NMR. Good catalytic effects were achieved (69–87%).

  20. Catalytic ozonation of pentachlorophenol in aqueous solutions using granular activated carbon

    Science.gov (United States)

    Asgari, Ghorban; Samiee, Fateme; Ahmadian, Mohammad; Poormohammadi, Ali; solimanzadeh, Bahman

    2014-11-01

    The efficiency of granular activated carbon (GAC) was investigated in this study as a catalyst for the elimination of pentachlorophenol (PCP) from contaminated streams in a laboratory-scale semi-batch reactor. The influence of important parameters including solution pH (2-10), radical scavenger (tert-butanol, 0.04 mol/L), catalyst dosage (0.416-8.33 g/L), initial PCP concentration (100-1000 mg/L) and ozone flow rate (2.3-12 mg/min) was examined on the efficiency of the catalytic ozonation process (COP) in degradation and mineralization of PCP in aqueous solution. The experimental results showed that catalytic ozonation with GAC was most effective at pH of 8 with ozone flow rate of 12 mg/min and a GAC dosage of 2 g. Compared to the sole ozonation process (SOP), the removal levels of PCP and COP were, 98, and 79 %, respectively. The degradation rate of kinetics was also investigated. The results showed that using a GAC catalyst in the ozonation of PCP produced an 8.33-fold increase in rate kinetic compared to the SOP under optimum conditions. Tert-butanol alcohol (TBA) was used as a radical scavenger. The results demonstrated that COP was affected less by TBA than by SOP. These findings suggested that GAC acts as a suitable catalyst in COP to remove refractory pollutants from aqueous solution.

  1. The stability and catalytic activity of W13@Pt42 core-shell structure

    Science.gov (United States)

    Huo, Jin-Rong; Wang, Xiao-Xu; Li, Lu; Cheng, Hai-Xia; Su, Yan-Jing; Qian, Ping

    2016-01-01

    This paper reports a study of the electronic properties, structural stability and catalytic activity of the W13@Pt42 core-shell structure using the First-principles calculations. The degree of corrosion of W13@Pt42 core-shell structure is simulated in acid solutions and through molecular absorption. The absorption energy of OH for this structure is lower than that for Pt55, which inhibits the poison effect of O containing intermediate. Furthermore we present the optimal path of oxygen reduction reaction catalyzed by W13@Pt42. Corresponding to the process of O molecular decomposition, the rate-limiting step of oxygen reduction reaction catalyzed by W13@Pt42 is 0.386 eV, which is lower than that for Pt55 of 0.5 eV. In addition by alloying with W, the core-shell structure reduces the consumption of Pt and enhances the catalytic efficiency, so W13@Pt42 has a promising perspective of industrial application. PMID:27759038

  2. The stability and catalytic activity of W13@Pt42 core-shell structure.

    Science.gov (United States)

    Huo, Jin-Rong; Wang, Xiao-Xu; Li, Lu; Cheng, Hai-Xia; Su, Yan-Jing; Qian, Ping

    2016-10-19

    This paper reports a study of the electronic properties, structural stability and catalytic activity of the W13@Pt42 core-shell structure using the First-principles calculations. The degree of corrosion of W13@Pt42 core-shell structure is simulated in acid solutions and through molecular absorption. The absorption energy of OH for this structure is lower than that for Pt55, which inhibits the poison effect of O containing intermediate. Furthermore we present the optimal path of oxygen reduction reaction catalyzed by W13@Pt42. Corresponding to the process of O molecular decomposition, the rate-limiting step of oxygen reduction reaction catalyzed by W13@Pt42 is 0.386 eV, which is lower than that for Pt55 of 0.5 eV. In addition by alloying with W, the core-shell structure reduces the consumption of Pt and enhances the catalytic efficiency, so W13@Pt42 has a promising perspective of industrial application.

  3. Synthesis, structural properties and catalytic activity of MgO-SnO2 nanocatalysts

    Science.gov (United States)

    Perveen, Hina; Farrukh, Muhammad Akhyar; Khaleeq-ur-Rahman, Muhammad; Munir, Badar; Tahir, Muhammad Ashraf

    2015-01-01

    Surfactant controlled synthesis of magnesium oxide-tin oxide (MgO-SnO2) nanocatalysts was carried out via the hydrothermal method. Concentration of sodium dodecyl sulfate (SDS) was varied while all other reaction conditions were kept constant same for this purpose. Furthermore, MgO-SnO2 nanocatalysts were also prepared by changing the precursor's concentration. These precursors are magnesium nitrate Mg(NO3)2 · 6H2O and tin chloride (SnCl4 · 5H2O). The influence of these reaction parameters on the sizes and morphology of the nanocatalysts were studied by using Fourier transform infrared (FTIR) spectroscopy, Scanning electron microscopy-Energy dispersive X-ray (SEM-EDX), Powder X-ray diffraction (XRD), Transmission electron microscopy and Thermo gravimetric analysis (TGA). The catalytic efficiency of MgO-SnO2 was checked against 2,4-dinitrophenylhydrazine (DNPH), which is an explosive compound. The nanocatalysts were found as a good catalyst to degrade the DNPH. Catalytic activity of nanocatalysts was observed up to 19.13% for the degradation DNPH by using UV-spectrophotometer.

  4. Catalytic activity of oil soluble molybdenum compounds for heavy oil hydrotreatment

    Energy Technology Data Exchange (ETDEWEB)

    Kushiyama, Satoshi; Aizawa, Reiji; Kobayashi, Satoru; Koinuma, Yutaka; Uemasu, Isamu; Shimizu, Yoshikazu (National Research Institute for Pollution and Resources, Tsukuba (Japan))

    1989-04-20

    Catalytic activity of oil-soluble molybdenum compounds in the hydrotreatment of heavy oil, with high content of the catalyst-poison compounds such as vanadium compounds and asphaltene, was studied. Reactions were performed using Venezuela Morichal crude and catalysts: molybdenum-dithiophoshpates, -dithiocarbamates and -naphthenates; and cobalt-cotylates, -dioctylphosphates. Catalyst systems containing Mo, Co, P and S (or mixtures of compounds containing each element) were found to show high activity for sulfur and vanadium removal. It was revealed that the addition of P compounds is essential for vanadium removal and the effect of Co compounds on the activity enhancement is shown in the only case of coexistence of P and S. No Mo, Co, P were found in the oil products. Recycle use of the Mo-Co-P-S catalyst resulted in a gradual decline of activity. However, the activity seems to be constant after three to four recycle uses, its activity was still higher than the initial activity of conventional Co-Mo-Al{sub 2}O{sub 3} catalyst. 13 refs., 5 tabs.

  5. Catalytic effect of activated carbon on bioleaching of low-grade primary copper sulfide ores

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The catalytic effect of activated carbon on the bioleaching of low-grade primary copper sulfide ores using mixture of Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans was investigated. The results show that the addition of activated carbon can greatly accelerate the rate and efficiency of copper dissolution from low-grade primary copper sulfide ores. The solution with the concentration of 3.0 g/L activated carbon is most beneficial to the dissolution of copper. The resting time of the mixture of activated carbon and ores has an impact on the bioleaching of low-grade primary copper sulfide ores. The 2 d resting time is most favorable to the dissolution of copper. The enhanced dissolution rate and efficiency of copper can be attributed to the galvanic interaction between activated carbon and chalcopyrite. The addition of activated carbon obviously depresses the dissolution of iron and the bacterial oxidation of ferrous ions in solution. The lower redox potentials are more favorable to the copper dissolution than the higher potentials for low-grade primary copper sulfide ores in the presence of activated carbon.

  6. Water-gas shift reaction on CuO-ZnO catalysts: I. Structure and catalytic activity

    Energy Technology Data Exchange (ETDEWEB)

    Kalchev, M.G.; Andreev, A.A. [Institute of Catalysis, Sofia (Bulgaria); Zotov, N.S. [Institute of Applied Mineralogy, Sofia (Bulgaria)

    1995-11-01

    The physicochemical properties of CuO-ZnO samples with different CuO contents were investgated by a complex of physical methods: DSC, XPS, EPR, TPR, and XRD. The samples containing {approximately}25 wt % CuO exhibited a maximum catalytic activity in the water-gas shift reaction. The catalytic activity was attributed to copper ions aggregated on the highly dispersed and defective CuO surface and to an anion-modified ZnO surface. Aggregates of copper ions, formed on metal species and probably modified with hydroxyl and carbonate groups, were shown to play a decisive role in the catalytic activity of the samples containing more than 15 wt % CuO.

  7. Mechanical bending induced catalytic activity enhancement of monolayer 1 T'-MoS2 for hydrogen evolution reaction

    Science.gov (United States)

    Shi, Wenwu; Wang, Zhiguo; Fu, Yong Qing

    2017-09-01

    In this paper, mechanisms behind enhancement of catalytic activity of MoS2 mono-layer (three atomic layers) for hydrogen evolution reaction (HER) by mechanically applying bending strain were investigated using density functional theory. Results showed that with the increase of bending strains, the Gibbs free energy for hydrogen adsorption on the MoS2 mono-layer was decreased from 0.18 to -0.04 eV and to 0.13 eV for the bend strains applied along the zigzag and armchair directions, respectively. The mechanism for the enhanced catalytic activity comes from the changes of density of electronic states near the Fermi energy level, which are induced by the changes of the Mo-S and Mo-Mo bonds upon bending. This report provides a new design methodology to improve the catalytic activity of catalysts based on two-dimensional transition metal dichalcogenides through a simple mechanical bending.

  8. Optical Absorption Property and Photo-catalytic Activity of Tin Dioxide-doped Titanium Dioxides

    Institute of Scientific and Technical Information of China (English)

    LI,Huai-Xiang; XIA,Rong-Hua; JIANG,Zheng-Wei; CHEN,Shan-Shan; CHEN,De-Zhan

    2008-01-01

    SnO2-doped TiO2 films and composite oxide powders have been prepared by a sol-gel method. Ti(OC4H9)4 and SnCl4·5H2O were used as precursors and C2H5OH was used as solvent. The optical absorption measurements indicate that the composite oxide SnO2-TiO2 thin films exhibit smaller optical energy band gaps than pure TiO2 thin films and the optical energy band gap decreases as calcining temperature increases. X-ray diffraction was used to characterize the phase transition for the composite oxide powders at different calcining temperatures. Aanatase phase is the main crystal structure in both pure TiO2 and Sn0.05Ti0.95O2 samples if calcining temperature is below 500℃. The rutile phase has appeared and coexisted with the anatase crystal phase for both pure TiO2 and Sn0.05Ti0.95O2 composite oxides when calcining was at 600℃ . Transmission electron microscopy analysis shows a smaller grain size in Sn0.05Ti0.95O2 powders than TiO2 powders calcined at 600℃. When calcining temperature is 700℃ , there is only rutile phase in Sn0.05Ti0.95O2 samples, but there are still two crystal phases, anatase and rutile, coexisting in the pure TiO2 samples. Assuming the grain growth obeys the first order kinetics, Arrhenius empirical relation has been used to estimate the activation energy of 47.486 and 33.103 kJ·mol-1 for the grain growth of TiO2 and Sn0.05Ti0.95O2, respectively. The photo-catalytic activity of the powder samples has been examined by measuring the degradation of methylene blue solution under ultra-violet irradiation. Two effective factors of photo-catalytic activity namely, the content of SnO2 in the TiO2 samples and the calcining temperature, have been optimized based on the photo-catalytic degradation of methylene blue solution.

  9. Extending Thymidine Kinase Activity to the Catalytic Repertoire of Human Deoxycytidine Kinase

    Energy Technology Data Exchange (ETDEWEB)

    Hazra, Saugata; Sabini, Eliszbetta; Ort, Stephan; Konrad, Manfred; Lavie, Arnon; (UIC); (MXPL-G)

    2009-03-04

    Salvage of nucleosides in the cytosol of human cells is carried out by deoxycytidine kinase (dCK) and thymidine kinase 1 (TK1). Whereas TK1 is only responsible for thymidine phosphorylation, dCK is capable of converting dC, dA, and dG into their monophosphate forms. Using structural data on dCK, we predicted that select mutations at the active site would, in addition to making the enzyme faster, expand the catalytic repertoire of dCK to include thymidine. Specifically, we hypothesized that steric repulsion between the methyl group of the thymine base and Arg104 is the main factor preventing the phosphorylation of thymidine by wild-type dCK. Here we present kinetic data on several dCK variants where Arg104 has been replaced by select residues, all performed in combination with the mutation of Asp133 to an alanine. We show that several hydrophobic residues at position 104 endow dCK with thymidine kinase activity. Depending on the exact nature of the mutations, the enzyme's substrate preference is modified. The R104M-D133A double mutant is a pyrimidine-specific enzyme due to large K{sub m} values with purines. The crystal structure of the double mutant R104M-D133A in complex with the L-form of thymidine supplies a structural explanation for the ability of this variant to phosphorylate thymidine and thymidine analogs. The replacement of Arg104 by a smaller residue allows L-dT to bind deeper into the active site, making space for the C5-methyl group of the thymine base. The unique catalytic properties of several of the mutants make them good candidates for suicide-gene/protein-therapy applications.

  10. Effect of nitrogen-containing impurities on the activity of perovskitic catalysts for the catalytic combustion of methane.

    Science.gov (United States)

    Buchneva, Olga; Gallo, Alessandro; Rossetti, Ilenia

    2012-11-05

    LaMnO(3), either pure or doped with 10 mol % Sr, has been prepared by flame pyrolysis in nanostructured form. Such catalysts have been tested for the catalytic flameless combustion of methane, achieving very high catalytic activity. The resistance toward poisoning by some model N-containing impurities has been checked in order to assess the possibility of operating the flameless catalytic combustion with biogas, possibly contaminated by S- or N-based compounds. This would be a significant improvement from the environmental point of view because the application of catalytic combustion to gas turbines would couple improved energy conversion efficiency and negligible noxious emissions, while the use of biogas would open the way to energy production from a renewable source by means of very efficient technologies. A different behavior has been observed for the two catalysts; namely, the undoped sample was more or less heavily poisoned, whereas the Sr-doped sample showed slightly increasing activity upon dosage of N-containing compounds. A possible reaction mechanism has been suggested, based on the initial oxidation of the organic backbone, with the formation of NO. The latter may adsorb more or less strongly depending on the availability of surface oxygen vacancies (i.e., depending on doping). Decomposition of NO may leave additional activated oxygen species on the surface, available for low-temperature methane oxidation and so improving the catalytic performance.

  11. Study of nitric oxide catalytic oxidation on manganese oxides-loaded activated carbon at low temperature

    Science.gov (United States)

    You, Fu-Tian; Yu, Guang-Wei; Wang, Yin; Xing, Zhen-Jiao; Liu, Xue-Jiao; Li, Jie

    2017-08-01

    Nitric oxide (NO) is an air pollutant that is difficult to remove at low concentration and low temperature. Manganese oxides (MnOx)-loaded activated carbon (MLAC) was prepared by a co-precipitation method and studied as a new catalyst for NO oxidation at low temperature. Characterization of MLAC included X-ray diffraction (XRD), scanning electron microscopy (SEM), N2 adsorption/desorption and X-ray photoelectron spectroscopy (XPS). Activity tests demonstrated the influence of the amount of MnOx and the test conditions on the reaction. MLAC with 7.5 wt.% MnOx (MLAC003) exhibits the highest NO conversion (38.7%) at 1000 ppm NO, 20 vol.% O2, room temperature and GHSV ca. 16000 h-1. The NO conversion of MLAC003 was elevated by 26% compared with that of activated carbon. The results of the MLAC003 activity test under different test conditions demonstrated that NO conversion is also influenced by inlet NO concentration, inlet O2 concentration, reaction temperature and GHSV. The NO adsorption-desorption process in micropores of activated carbon is fundamental to NO oxidation, which can be controlled by pore structure and reaction temperature. The activity elevation caused by MnOx loading is assumed to be related to Mn4+/Mn3+ ratio. Finally, a mechanism of NO catalytic oxidation on MLAC based on NO adsorption-desorption and MnOx lattice O transfer is proposed.

  12. Dimethylphosphinate bridged binuclear Rh(i) catalysts for the alkoxycarbonylation of aromatic C-H bonds.

    Science.gov (United States)

    Iturmendi, Amaia; Sanz Miguel, Pablo J; Popoola, Saheed A; Al-Saadi, Abdulaziz A; Iglesias, Manuel; Oro, Luis A

    2016-11-14

    A variety of binuclear rhodium(i) complexes featuring two bridging dimethylphosphinate ligands ((CH3)2PO2(-)) have been prepared and tested in the alkoxycarbonylation of aromatic C-H bonds. The complex [Rh(μ-κO,O'-(CH3)2PO2)(cod)]2 has been prepared by a reaction of [Rh(μ-MeO)(cod)]2 with 2 equivalents of dimethylphosphinic acid. Binuclear complexes [Rh(μ-κO,O'-(CH3)2PO2)(CO)L]2 (L = PPh3, P(OMe)Ph2 and P(OPh)3) were obtained by carbonylation of the related mononuclear complexes [Rh(κO-(CH3)2PO2)(cod)(L)], which were prepared in situ by the reaction of [Rh(μ-κO,O'-(CH3)2PO2)(cod)]2 with 2 equivalents of L. Conversely, if L = IPr, the reaction of [Rh(μ-κO,O'-(CH3)2PO2)(CO)L]2 with carbon monoxide affords the mononuclear complex [Rh(κO-(CH3)2PO2)(CO)2IPr]. The subsequent reaction with trimethylamine N-oxide gives the corresponding binuclear complex [Rh(μ-κO,O'-(CH3)2PO2)(CO)(IPr)]2 by abstraction of one of the carbonyl ligands. Complexes [Rh(μ-κO,O'-(CH3)2PO2)(cod)]2 and [Rh(κO-(CH3)2PO2)(cod)(L)] (L = IPr, PPh3, P(OMe)Ph2, P(OPh)3) are active precatalysts in the alkoxycarbonylation of C-H bonds, with the ligand system playing a key role in the catalytic activity. The complexes that feature more labile Rh-L bonds give rise to better catalysts, probably due to the more straightforward substitution of L by a second carbonyl ligand, since a more electrophilic carbonyl carbon atom is more susceptible toward aryl migration. In fact, complexes [Rh(μ-κO,O'-(CH3)2PO2)(CO)2]2 and [Rh(μ-Cl)(CO)2]2, generated in situ from [Rh(μ-κO,O'-(CH3)2PO2)(cod)]2 and [Rh(μ-Cl)(cod)2]2, respectively, are the most active catalysts tested in this work.

  13. Synthesis of novel carbon/silica composites based strong acid catalyst and its catalytic activities for acetalization

    Indian Academy of Sciences (India)

    Yueqing Lu; Xuezheng Liang; Chenze Qi

    2012-06-01

    Novel solid acid based on carbon/silica composites are synthesized through one-pot hydrothermal carbonization of hydroxyethylsulfonic acid, sucrose and tetraethyl orthosilicate (TEOS). The novel solid acid owned the acidity of 2.0 mmol/g, much higher than that of the traditional solid acids such as Nafion and Amberlyst-15 (0.8 mmol/g). The catalytic activities of the solid acid are investigated through acetalization. The results showed that the novel solid acid was very efficient for the reactions. The high acidity and catalytic activities made the novel carbon/silica composites based solid acid hold great potential for the green chemical processes.

  14. Nanocasted synthesis of the mesostructured LaCoO3 perovskite and its catalytic activity in methane combustion.

    Science.gov (United States)

    Wang, Yangang; Wang, Yanqin; Liu, Xiaohui; Guo, Yun; Guo, Yanglong; Lu, Guanzhong

    2009-02-01

    Extremely high surface area, mesostructured LaCoO3 perovskite has been synthesized by nanocasting from mesoporous cubic (Ia3d) vinyl silica. Thus-prepared material was characterized by XRD, TEM, and N2-sorption, and its catalytic property was also tested in methane combustion. The catalytic results demonstrated that thus-prepared mesostructured LaCoO3 perovskite had higher activity than the conventional bulk LaCoO3 perovskite prepared by citrate method. Further analysis showed that both the high surface area and the existence of high valent cobalt ions (Co4+, XPS analysis) were contributed to the high activity.

  15. Synthesis of gold nanoparticles using renewable Punica granatum juice and study of its catalytic activity

    Science.gov (United States)

    Dash, Shib Shankar; Bag, Braja Gopal

    2014-01-01

    Punica granatum juice, a delicious multivitamin drink of great medicinal significance, is rich in different types of phytochemicals, such as terpenoids, alkaloids, sterols, polyphenols, sugars, fatty acids, aromatic compounds, amino acids, tocopherols, etc. We have demonstrated the use of the juice for the synthesis of gold nanoparticles (AuNPs) at room temperature under very mild conditions. The synthesis of the AuNPs was complete in few minutes and no extra stabilizing or capping agents were necessary. The size of the nanoparticles could be controlled by varying the concentration of the fruit extract. The AuNPs were characterized by surface plasmon resonance spectroscopy, high resolution transmission electron microscopy, fourier transform infrared spectroscopy and X-ray diffraction studies. Catalytic activity of the synthesized colloidal AuNPs has also been demonstrated.

  16. Palladium nanoparticle anchored polyphosphazene nanotubes: preparation and catalytic activity on aryl coupling reactions

    Indian Academy of Sciences (India)

    V Devi; A Ashok Kumar; S Sankar; K Dinakaran

    2015-06-01

    Highly accessible-supported palladium (Pd) nanoparticles anchored polyphosphazene (PPZ) nanotubes (NTs) having average diameter of 120 nm were synthesized rapidly at room temperature and homogeneously decorated with Pd nanoparticles. The resultant PPZ–Pd nanocomposites were morphologically and structurally characterized by means of transmission electron microscope equipped with energy-dispersive X-ray spectroscopy and X-ray diffraction analysis. Characterization results showed that the Pd nanoparticles with good dispersibility could be well anchored onto the surfaces of the PPZ NTs. The PPZ–Pd NTs show enhanced catalytic activity for the Suzuki coupling of aryl bromides with arylboronic acid. In addition, these PPZ–Pd NTs show excellent behaviour as reusable catalysts of the Suzuki and Heck coupling reactions.

  17. Phoenix dactylifera L. leaf extract phytosynthesized gold nanoparticles; controlled synthesis and catalytic activity.

    Science.gov (United States)

    Zayed, Mervat F; Eisa, Wael H

    2014-01-01

    A green synthesis route was reported to explore the reducing and capping potential of Phoenix dactylifera extract for the synthesis of gold nanoparticles. The processes of nucleation and growth of gold nanoparticles were followed by monitoring the absorption spectra during the reaction. The size and morphology of these nanoparticles was typically imaged using transmission electron microscopy (TEM). The particle size ranged between 32 and 45 nm and are spherical in shape. Fourier transform infrared (FTIR) analysis suggests that the synthesized gold nanoparticles might be stabilized through the interactions of hydroxyl and carbonyl groups in the carbohydrates, flavonoids, tannins and phenolic acids present in P. dactylifera. The as-synthesized Au colloids exhibited good catalytic activity for the degradation of 4-nitrophenol.

  18. Green synthesis of gold nanoparticles using aspartame and their catalytic activity for p-nitrophenol reduction

    Science.gov (United States)

    Wu, Shufen; Yan, Songjing; Qi, Wei; Huang, Renliang; Cui, Jing; Su, Rongxin; He, Zhimin

    2015-05-01

    We demonstrated a facile and environmental-friendly approach to form gold nanoparticles through the reduction of HAuCl4 by aspartame. The single-crystalline structure was illustrated by transmission electron microscopy (TEM) and X-ray diffraction (XRD). The energy-dispersive X-ray spectroscopy (EDS) and Fourier transform infrared (FTIR) results indicated that aspartame played a pivotal role in the reduction and stabilization of the gold crystals. The crystals were stabilized through the successive hydrogen-bonding network constructed between the water and aspartame molecules. Additionally, gold nanoparticles synthesized through aspartame were shown to have good catalytic activity for the reduction of p-nitrophenol to p-aminophenol in the presence of NaBH4.

  19. Catalytic Activity of Dual Metal Cyanide Complex in Multi-component Coupling Reactions

    Institute of Scientific and Technical Information of China (English)

    Anaswara RAVINDRAN; Rajendra SRIVASTAVA

    2011-01-01

    Several dual metal cyanide catalysts were prepared from potassium ferrocyanide,metal chloride (where metal =Zn2+,Mn2+,Ni2+,Co2+ and Fe2+),t-butanol (complexing agent) and PEG-4000 (co-complexing agent).The catalysts were characterized by elemental analysis (CHN and X-ray fluorescence),X-ray diffraction,N2 adsorption-desorption,scanning electron microscopy,Fourier-transform infiared spectroscopy,and UV-Visible spectroscopy.The dual metal cyanide catalysts were used in several acid catalyzed multi-component coupling reactions for the synthesis of pharmaceutically important organic derivatives.In all these reactions,the Fe-Fe containing dual metal cyanide catalyst was the best catalyst.The catalysts can be recycled without loss in catalytic activity.The advantage of this method is the use of mild,efficient and reusable catalysts for various reactions,which makes them candidates for commercial use.

  20. Catalytic Pyrolyses of Rayon and the Effect on Activated Carbon Fiber

    Institute of Scientific and Technical Information of China (English)

    曾凡龙; 潘鼎

    2004-01-01

    The catalytic pyrolyses of rayon have been studied respectively by thermo-gravimetric analysis (TGA) when rayon was treated with phosphoric acid (PA), three ammonium phosphate salts and ammonium sulfate (AS). The air is favorable to the catalysis of dibasic ammonium phosphate (DAP), but not to those of ADP, PA, AP, and AS obviously. It is put forward that a peak's shape character can be described with the ratio of height to half-height-width (H/W/2) of the peak on a differential thermo-gravimetric (DTG) curve. A flat cracking peak, presenting a more moderate dehydration reaction, has a smaller ratio and could lead to higher carbonization and activation yields. The experimental results prove this view. According to expectation, the order of catalysis is: DAP≥ADP>PA>AP(>>)AS(>>) no catalyst.

  1. Catalytic activity of polymer-bound Ru(III)–EDTA complex

    Indian Academy of Sciences (India)

    Mahesh K Dalal; R N Ram

    2001-04-01

    Chloromethylated styrene–divinylbenzene copolymer was chemically modified with ethylenediaminetetraacetic acid ligand. Catalytically active polymer containing Ru(III) moieties were synthesized from this polymeric ligand. They were characterized using FTIR, UV-vis, SEM, ESR and TGA. Other physico-chemical properties such as bulk density, surface area, moisture content and swelling behaviour in different solvents were also studied. The polymer bound complex was used to study hydrogenation of 1-hexene to -hexane under mild conditions. Influence of [1-hexene], [catalyst], temperature and nature of the solvent on the rate of the reaction was investigated. A rate expression is proposed based on the observed initial rate data. Recycling efficiency of the catalyst has also been studied.

  2. Carbon supported trimetallic nickel-palladium-gold hollow nanoparticles with superior catalytic activity for methanol electrooxidation

    Science.gov (United States)

    Shang, Changshuai; Hong, Wei; Wang, Jin; Wang, Erkang

    2015-07-01

    In this paper, Ni nanoparticles (NPs) are prepared in an aqueous solution by using sodium borohydride as reducing agent. With Ni NPs as the sacrificial template, hollow NiPdAu NPs are successfully prepared via partly galvanic displacement reaction between suitable metal precursors and Ni NPs. The as-synthesized hollow NiPdAu NPs can well dispersed on the carbon substrate. Transmission electron microscopy, X-ray diffraction and inductively coupled plasma mass spectrometry are taken to analyze the morphology, structure and composition of the as-synthesized catalysts. The prepared catalysts show superior catalytic activity and stability for methanol electrooxidation in alkaline media compared with commercial Pd/C and Pt/C. Catalysts prepared in this work show great potential to be anode catalysts in direct methanol fuel cells.

  3. Tunable catalytic activity of solid solution metal-organic frameworks in one-pot multicomponent reactions.

    Science.gov (United States)

    Aguirre-Díaz, Lina María; Gándara, Felipe; Iglesias, Marta; Snejko, Natalia; Gutiérrez-Puebla, Enrique; Monge, M Ángeles

    2015-05-20

    The aim of this research is to establish how metal-organic frameworks (MOFs) composed of more than one metal in equivalent crystallographic sites (solid solution MOFs) exhibit catalytic activity, which is tunable by virtue of the metal ions ratio. New MOFs with general formula [InxGa1-x(O2C2H4)0.5(hfipbb)] were prepared by the combination of Ga and In. They are isostructural with their monometal counterparts, synthesized with Al, Ga, and In. Differences in their behavior as heterogeneous catalysts in the three-component, one pot Strecker reaction illustrate the potential of solid solution MOFs to provide the ability to address the various stages involved in the reaction mechanism.

  4. Synthesis, characterization and catalytic activity of carbon-silica hybrid catalyst from rice straw

    Science.gov (United States)

    Janaun, J.; Safie, N. N.; Siambun, N. J.

    2016-07-01

    The hybrid-carbon catalyst has been studied because of its promising potential to have high porosity and surface area to be used in biodiesel production. Silica has been used as the support to produce hybrid carbon catalyst due to its mesoporous structure and high surface area properties. The chemical synthesis of silica-carbon hybrid is expensive and involves more complicated preparation steps. The presence of natural silica in rice plants especially rice husk has received much attention in research because of the potential as a source for solid acid catalyst synthesis. But study on rice straw, which is available abundantly as agricultural waste is limited. In this study, rice straw undergone pyrolysis and functionalized using fuming sulphuric acid to anchor -SO3H groups. The presence of silica and the physiochemical properties of the catalyst produced were studied before and after sulphonation. The catalytic activity of hybrid carbon silica acid catalyst, (H-CSAC) in esterification of oleic acid with methanol was also studied. The results showed the presence of silica-carbon which had amorphous structure and highly porous. The carbon surface consisted of higher silica composition, had lower S element detected as compared to the surface that had high carbon content but lower silica composition. This was likely due to the fact that Si element which was bonded to oxygen was highly stable and unlikely to break the bond and react with -SO3H ions. H-CSAC conversions were 23.04 %, 35.52 % and 34.2 7% at 333.15 K, 343.15 K and 353.15 K, respectively. From this research, rice straw can be used as carbon precursor to produce hybrid carbon-silica catalyst and has shown catalytic activity in biodiesel production. Rate equation obtained is also presented.

  5. Monoclonal Antibodies Targeting the Alpha-Exosite of Botulinum Neurotoxin Serotype/A Inhibit Catalytic Activity.

    Directory of Open Access Journals (Sweden)

    Yongfeng Fan

    Full Text Available The paralytic disease botulism is caused by botulinum neurotoxins (BoNT, multi-domain proteins containing a zinc endopeptidase that cleaves the cognate SNARE protein, thereby blocking acetylcholine neurotransmitter release. Antitoxins currently used to treat botulism neutralize circulating BoNT but cannot enter, bind to or neutralize BoNT that has already entered the neuron. The light chain endopeptidase domain (LC of BoNT serotype A (BoNT/A was targeted for generation of monoclonal antibodies (mAbs that could reverse paralysis resulting from intoxication by BoNT/A. Single-chain variable fragment (scFv libraries from immunized humans and mice were displayed on the surface of yeast, and 19 BoNT/A LC-specific mAbs were isolated by using fluorescence-activated cell sorting (FACS. Affinities of the mAbs for BoNT/A LC ranged from a KD value of 9.0×10-11 M to 3.53×10-8 M (mean KD 5.38×10-9 M and median KD 1.53×10-9 M, as determined by flow cytometry analysis. Eleven mAbs inhibited BoNT/A LC catalytic activity with IC50 values ranging from 8.3 ~73×10-9 M. The fine epitopes of selected mAbs were also mapped by alanine-scanning mutagenesis, revealing that the inhibitory mAbs bound the α-exosite region remote from the BoNT/A LC catalytic center. The results provide mAbs that could prove useful for intracellular reversal of paralysis post-intoxication and further define epitopes that could be targeted by small molecule inhibitors.

  6. Correlation between the extent of catalytic activity and charge density of montmorillonites.

    Science.gov (United States)

    Ertem, Gözen; Steudel, Annett; Emmerich, Katja; Lagaly, Gerhard; Schuhmann, Rainer

    2010-09-01

    The clay mineral montmorillonite is a member of the phyllosilicate group of minerals, which has been detected on martian soil. Montmorillonite catalyzes the condensation of activated monomers to form RNA-like oligomers. Extent of catalysis, that is, the yield of oligomers, and the length of the longest oligomer formed in these reactions widely varies with the source of montmorillonite (i.e., the locality where the mineral is mined). This study was undertaken to establish whether there exists a correlation between the extent of catalytic property and the charge density of montmorillonites. Charge density was determined by saturating the montmorillonites with alkyl ammonium cations that contained increasing lengths of alkyl chains, [CH₃-(CH₂)(n)-NH₃](+), where n = 3-16 and 18, and then measuring d(₀₀₁), interlayer spacing of the resulting montmorillonite-alkyl ammonium-montmorillonite complex by X-ray diffractometry (XRD). Results demonstrate that catalytic activity of montmorillonites with lower charge density is superior to that of higher charge density montmorillonite. They produce longer oligomers that contain 9 to 10 monomer units, while montmorillonite with high charge density catalyzes the formation of oligomers that contain only 4 monomer units. The charge density of montmorillonites can also be calculated from the chemical composition if elemental analysis data of the pure mineral are available. In the next mission to Mars, CheMin (Chemistry and Mineralogy), a combined X-ray diffraction/X-ray fluorescence instrument, will provide information on the mineralogical and elemental analysis of the samples. Possible significance of these results for planning the future missions to Mars for the search of organic compounds and extinct or extant life is discussed.

  7. Preparation of enzyme nanoparticles and studying the catalytic activity of the immobilized nanoparticles on polyethylene films.

    Science.gov (United States)

    Meridor, David; Gedanken, Aharon

    2013-01-01

    Using high-intensity ultrasound, in situ generated α-amylase nanoparticles (NPs) were immobilized on polyethylene (PE) films. The α-amylase NP-coated PE films have been characterized by E-SEM, FTIR, DLS, XPS and RBS. The PE was reacted with HNO(3) and NPs of the α-amylase were also deposited on the activated PE. The PE impregnated with α-amylase (4 μg per 1mg PE) was used for hydrolyzing soluble potato starch to maltose. The immobilization improved the catalytic activity of α-amylase at all the reaction conditions studied. The kinetic parameters, K(m) (5 and 4 g L(-1) for the regular and activated PE, respectively) and V(max) (5 × 10(-7) mol ml(-1) min(-1), almost the same numbers were obtained for the regular and activated PEs) for the immobilized amylase were found to slightly favor the respective values obtained for the free enzyme (K(m) = 6.6 g L(-1), V(max) = 3.7 × 10(-7) mol ml(-1) min(-1)). The enzyme remained bound to PE even after soaking the PE in a starch solution for 72 h and was still found to be weakly active. Copyright © 2012 Elsevier B.V. All rights reserved.

  8. Catalytic diesel particulate filters reduce the in vitro estrogenic activity of diesel exhaust.

    Science.gov (United States)

    Wenger, Daniela; Gerecke, Andreas C; Heeb, Norbert V; Naegeli, Hanspeter; Zenobi, Renato

    2008-04-01

    An in vitro reporter gene assay based on human breast cancer T47D cells (ER-CALUX) was applied to examine the ability of diesel exhaust to induce or inhibit estrogen receptor (ER)-mediated gene expression. Exhaust from a heavy-duty diesel engine was either treated by iron- or copper/iron-catalyzed diesel particulate filters (DPFs) or studied as unfiltered exhaust. Collected samples included particle-bound and semivolatile constituents of diesel exhaust. Our findings show that all of the samples contained compounds that were able to induce ER-mediated gene expression as well as compounds that suppressed the activity of the endogenous hormone 17beta-estradiol (E2). Estrogenic activity prevailed over antiestrogenic activity. We found an overall ER-mediated activity of 1.63 +/- 0.31 ng E2 CALUX equivalents (E2-CEQs) per m(3) of unfiltered exhaust. In filtered exhaust, we measured 0.74 +/- 0.07 (iron-catalyzed DPF) and 0.55 +/- 0.09 ng E2-CEQ m(-3) (copper/iron-catalyzed DPF), corresponding to reductions in estrogenic activity of 55 and 66%, respectively. Our study demonstrates that both catalytic DPFs lowered the ER-mediated endocrine-disrupting potential of diesel exhaust.

  9. Catalytic diesel particulate filters reduce the in vitro estrogenic activity of diesel exhaust

    Energy Technology Data Exchange (ETDEWEB)

    Wenger, Daniela; Gerecke, Andreas C.; Heeb, Norbert V. [Laboratory for Analytical Chemistry, Empa, Swiss Federal Laboratories for Materials Testing and Research, Duebendorf (Switzerland); Naegeli, Hanspeter [University of Zurich-Vetsuisse, Institute of Pharmacology and Toxicology, Zurich (Switzerland); Zenobi, Renato [ETH Zurich, Department of Chemistry and Applied Biosciences, Zurich (Switzerland)

    2008-04-15

    An in vitro reporter gene assay based on human breast cancer T47D cells (ER-CALUX {sup registered}) was applied to examine the ability of diesel exhaust to induce or inhibit estrogen receptor (ER)-mediated gene expression. Exhaust from a heavy-duty diesel engine was either treated by iron- or copper/iron-catalyzed diesel particulate filters (DPFs) or studied as unfiltered exhaust. Collected samples included particle-bound and semivolatile constituents of diesel exhaust. Our findings show that all of the samples contained compounds that were able to induce ER-mediated gene expression as well as compounds that suppressed the activity of the endogenous hormone 17{beta}-estradiol (E2). Estrogenic activity prevailed over antiestrogenic activity. We found an overall ER-mediated activity of 1.63 {+-} 0.31 ng E2 CALUX equivalents (E2-CEQs) per m{sup 3} of unfiltered exhaust. In filtered exhaust, we measured 0.74 {+-} 0.07 (iron-catalyzed DPF) and 0.55 {+-} 0.09 ng E2-CEQ m{sup -3} (copper/iron-catalyzed DPF), corresponding to reductions in estrogenic activity of 55 and 66%, respectively. Our study demonstrates that both catalytic DPFs lowered the ER-mediated endocrine-disrupting potential of diesel exhaust. (orig.)

  10. Tuning the catalytic activity of graphene nanosheets for oxygen reduction reaction via size and thickness reduction.

    Science.gov (United States)

    Benson, John; Xu, Qian; Wang, Peng; Shen, Yuting; Sun, Litao; Wang, Tanyuan; Li, Meixian; Papakonstantinou, Pagona

    2014-11-26

    Currently, the fundamental factors that control the oxygen reduction reaction (ORR) activity of graphene itself, in particular, the dependence of the ORR activity on the number of exposed edge sites remain elusive, mainly due to limited synthesis routes of achieving small size graphene. In this work, the synthesis of low oxygen content (graphene nanosheets with lateral dimensions smaller than a few hundred nanometers were achieved using a combination of ionic liquid assisted grinding of high purity graphite coupled with sequential centrifugation. We show for the first time that the graphene nanosheets possessing a plethora of edges exhibited considerably higher electron transfer numbers compared to the thicker graphene nanoplatelets. This enhanced ORR activity was accomplished by successfully exploiting the plethora of edges of the nanosized graphene as well as the efficient electron communication between the active edge sites and the electrode substrate. The graphene nanosheets were characterized by an onset potential of -0.13 V vs Ag/AgCl and a current density of -3.85 mA/cm2 at -1 V, which represent the best ORR performance ever achieved from an undoped carbon based catalyst. This work demonstrates how low oxygen content nanosized graphene synthesized by a simple route can considerably impact the ORR catalytic activity and hence it is of significance in designing and optimizing advanced metal-free ORR electrocatalysts.

  11. Environmental Topology and Water Availability Modulates the Catalytic Activity of β-Galactosidase Entrapped in a Nanosporous Silicate Matrix.

    Science.gov (United States)

    Burgos, M Ines; Velasco, Manuel I; Acosta, Rodolfo H; Perillo, María A

    2016-11-04

    In the present work we studied the catalytic activity of E. coli β-Gal confined in a nanoporous silicate matrix (Eβ-Gal) at different times after the beginning of the sol-gel polymerization process. Enzyme kinetic experiments with two substrates (ONPG and PNPG) that differed in the rate-limiting steps of the reaction mechanism for their β-Gal-catalyzed hydrolysis, measurements of transverse relaxation times (T2) of water protons through (1)H-NMR, and scanning electron microscopy analysis of the gel nanostructure, were performed. In conjunction, results provided evidence that water availability is crucial for the modulation observed in the catalytic activity of β-Gal as long as water participate in the rate limiting step of the reaction (only with ONPG). In this case, a biphasic rate vs. substrate concentration was obtained exhibiting one phase with catalytic rate constant (kcA), similar to that observed in solution, and another phase with a higher and aging-dependent catalytic rate constant (kcB). More structured water populations (lower T2) correlates with higher catalytic rate constants (kcB). The T2-kcB negative correlation observed along the aging of gels within the 15-days period assayed reinforces the coupling between water structure and the hydrolysis catalysis inside gels.

  12. Modeling of catalytically active metal complex species and intermediates in reactions of organic halides electroreduction.

    Science.gov (United States)

    Lytvynenko, Anton S; Kolotilov, Sergey V; Kiskin, Mikhail A; Eremenko, Igor L; Novotortsev, Vladimir M

    2015-02-28

    The results of quantum chemical modeling of organic and metal-containing intermediates that occur in electrocatalytic dehalogenation reactions of organic chlorides are presented. Modeling of processes that take place in successive steps of the electrochemical reduction of representative C1 and C2 chlorides - CHCl3 and Freon R113 (1,1,2-trifluoro-1,2,2-trichloroethane) - was carried out by density functional theory (DFT) and second-order Møller-Plesset perturbation theory (MP2). It was found that taking solvation into account using an implicit solvent model (conductor-like screening model, COSMO) or considering explicit solvent molecules gave similar results. In addition to modeling of simple non-catalytic dehalogenation, processes with a number of complexes and their reduced forms, some of which were catalytically active, were investigated by DFT. Complexes M(L1)2 (M = Fe, Co, Ni, Cu, Zn, L1H = Schiff base from 2-pyridinecarbaldehyde and the hydrazide of 4-pyridinecarboxylic acid), Ni(L2) (H2L2 is the Schiff base from salicylaldehyde and 1,2-ethylenediamine, known as salen) and Co(L3)2Cl2, representing a fragment of a redox-active coordination polymer [Co(L3)Cl2]n (L3 is the dithioamide of 1,3-benzenedicarboxylic acid), were considered. Gradual changes in electronic structure in a series of compounds M(L1)2 were observed, and correlations between [M(L1)2](0) spin-up and spin-down LUMO energies and the relative energies of the corresponding high-spin and low-spin reduced forms, as well as the shape of the orbitals, were proposed. These results can be helpful for determination of the nature of redox-processes in similar systems by DFT. No specific covalent interactions between [M(L1)2](-) and the R113 molecule (M = Fe, Co, Ni, Zn) were found, which indicates that M(L1)2 electrocatalysts act rather like electron transfer mediators via outer-shell electron transfer. A relaxed surface scan of the adducts {M(L1)2·R113}(-) (M = Ni or Co) versus the distance between the

  13. Preparation and photo-catalytic activities of FeOOH/ZnO/MMT composite

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Yao, E-mail: zy19830808@163.com [College of Environment and Safety Engineering, Qingdao University of Science and Technology, Qingdao 266042 (China); Liu, Fusheng; Yu, Shitao [College of Chemical Engineering, Qingdao University of Science and Technology, Qingdao 266042 (China)

    2015-11-15

    Highlights: • The montmorillonite was used as the carrier for the synthesis of FeOOH nano-material and FeOOH/ZnO nano-material. • TEM was used to study the structure of the two nano-materials with the composite structure of goethite and wurtzite. • TEM was used to demonstrate FeOOH/ZnO nano-material can formed with the appropriate interface: wurtzite-(1 0 1)/(1 1 1)-goethite. • There were some coupling effect between FeOOH and ZnO, which can improve the photo-catalytic activities of FeOOH. • According to FTIR and TOC, PCP was degraded to aromatic ketone compounds and then to H{sub 2}O, CO{sub 2}, HCl. - Abstract: Montmorillonite (MMT) was used as the carrier for synthesis of FeOOH and FeOOH/ZnO nano-material. FeOOH and FeOOH/ZnO were synthesized by the aqueous solutions of Fe(NO{sub 3}){sub 3}–HNO{sub 3} and Zn(NO{sub 3}){sub 2}–NaOH/Fe(NO{sub 3}){sub 3}–HNO{sub 3} with the carrier of montmorillonite respectively. Transmission electron-microscopy (TEM) and X-ray diffraction (XRD) were used to study the morphology form and structure of the nano-materials. TEM was also used to demonstrate that FeOOH/ZnO can be formed with the appropriate interface. According to UV–vis absorption spectra, FeOOH/ZnO has a better response to visible light than FeOOH and ZnO, which indicates there is some coupling effect between FeOOH and ZnO. Pentachlorophenol (PCP) was used as a representative organic pollutant to evaluate the photo-catalytic efficiency of the FeOOH/ZnO and FeOOH catalysts in visible light (λ > 400 nm). The photo-catalytic efficiency of FeOOH/ZnO/MMT is better than FeOOH/MMT. According to FTIR, changes of pH and TOC, the degradation mechanism was also discussed. PCP was degraded to aromatic ketone and chloro-hydrocarbon compounds and then to H{sub 2}O, CO{sub 2} and HCl.

  14. Solvent templates induced porous metal-organic materials: conformational isomerism and catalytic activity.

    Science.gov (United States)

    Ding, Ran; Huang, Chao; Lu, Jingjing; Wang, Junning; Song, Chuanjun; Wu, Jie; Hou, Hongwei; Fan, Yaoting

    2015-02-16

    Solvent templates induced Co-based metal-organic materials; conformational isomers {[Co2(pdpa)(CH3CN)(H2O)3]·CH3OH·H2O}n (1) and {[Co2(pdpa)(CH3CN)(H2O)3]}n (2) and {[Co5(pdpa)2(μ3-OH)2(H2O)6]·2H2O}n (3) [H4pdpa = 5,5'-(pentane-1,2-diyl)-bis(oxy)diisophthalic acid] were synthesized under the same solvothermal conditions except with different concentrations of cyclic ethers (1,4-dioxane or tetrahydrofuran) as structure-directing agents. Structural transformations from a three-dimensional (3D) framework of 1 containing channels with dimensions of ∼6 Å × 6 Å to a two-dimensional layer structure of 2 consisting of large open channels with a size of ∼15 Å × 8 Å and then to a 3D nonporous framework of 3, resulting from the different concentrations of cyclic ethers, were observed. The anion-π interactions between electron-efficient oxygen atoms of cyclic ethers and electron-deficient dicarboxylic acid aromatic cores in H4pdpa imported into the synthetic process accounted for the conformational change of the ligand H4pdpa and the following structural variations. A systematic investigation was conducted to explore how different concentrations of structure-directing agents affected the frameworks of resultant metal-organic frameworks. Furthermore, 1-3 were shown to be available heterogeneous catalysts for the synthesis of 2-imidazoline and 1,4,5,6-tetrahydropyrimidine derivatives by the cascade cycloaddition reactions of aromatic nitriles with diamines. The results showed that the catalytic activity of 2 was much higher than that of 1 and 3, because of its unique structural features, including accessible catalytic sites and suitable channel size and shape. In addition, a plausible mechanism for these catalytic reactions was proposed, and the reactivity-structure relationship was further clarified.

  15. Cytochrome c oxidase loses catalytic activity and structural integrity during the aging process in Drosophila melanogaster

    Energy Technology Data Exchange (ETDEWEB)

    Ren, Jian-Ching; Rebrin, Igor [Department of Pharmacology and Pharmaceutical Sciences, University of Southern California, Los Angeles, CA 90033 (United States); Klichko, Vladimir; Orr, William C. [Department of Biological Sciences, Southern Methodist University, Dallas, TX 75275 (United States); Sohal, Rajindar S., E-mail: sohal@usc.edu [Department of Pharmacology and Pharmaceutical Sciences, University of Southern California, Los Angeles, CA 90033 (United States)

    2010-10-08

    Research highlights: {yields} Cytochrome c oxidase loses catalytic activity during the aging process. {yields} Abundance of seven nuclear-encoded subunits of cytochrome c oxidase decreased with age in Drosophila. {yields} Cytochrome c oxidase is specific intra-mitochondrial site of age-related deterioration. -- Abstract: The hypothesis, that structural deterioration of cytochrome c oxidase (CcO) is a causal factor in the age-related decline in mitochondrial respiratory activity and an increase in H{sub 2}O{sub 2} generation, was tested in Drosophila melanogaster. CcO activity and the levels of seven different nuclear DNA-encoded CcO subunits were determined at three different stages of adult life, namely, young-, middle-, and old-age. CcO activity declined progressively with age by 33%. Western blot analysis, using antibodies specific to Drosophila CcO subunits IV, Va, Vb, VIb, VIc, VIIc, and VIII, indicated that the abundance these polypeptides decreased, ranging from 11% to 40%, during aging. These and previous results suggest that CcO is a specific intra-mitochondrial site of age-related deterioration, which may have a broad impact on mitochondrial physiology.

  16. Catalytic activation of pre-substrates via dynamic fragment assembly on protein templates.

    Science.gov (United States)

    Burda, Edyta; Rademann, Jörg

    2014-11-18

    Sensitive detection of small molecule fragments binding to defined sites of biomacromolecules is still a considerable challenge. Here we demonstrate that protein-binding fragments are able to induce enzymatic reactions on the protein surface via dynamic fragment ligation. Fragments binding to the S1 pocket of serine proteases containing a nitrogen, oxygen or sulphur nucleophile are found to activate electrophilic pre-substrates through a reversible, covalent ligation reaction. The dynamic ligation reaction positions the pre-substrate molecule at the active site of the protein thereby inducing its enzymatic cleavage. Catalytic activation of pre-substrates is confirmed by fluorescence spectroscopy and by high-performance liquid chromatography. The approach is investigated with 3 pre-substrates and 14 protein-binding fragments and the specific activation and the templating effect exerted by the enzyme is quantified for each protease-fragment-pre-substrate combination. The described approach enables the site-specific identification of protein-binding fragments, the functional characterization of enzymatic sites and the quantitative analysis of protein template-assisted ligation reactions.

  17. Catalytic activity of various pepsin reduced Au nanostructures towards reduction of nitroarenes and resazurin

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, Bhagwati; Mandani, Sonam; Sarma, Tridib K., E-mail: tridib@iiti.ac.in [Indian Institute of Technology Indore, Discipline of Chemistry, School of Basic Sciences (India)

    2015-01-15

    Pepsin, a digestive protease enzyme, could function as a reducing as well as stabilizing agent for the synthesis of Au nanostructures of various size and shape under different reaction conditions. The simple tuning of the pH of the reaction medium led to the formation of spherical Au nanoparticles, anisotropic Au nanostructures such as triangles, hexagons, etc., as well as ultra small fluorescent Au nanoclusters. The activity of the enzyme was significantly inhibited after its participation in the formation of Au nanoparticles due to conformational changes in the native structure of the enzyme which was studied by fluorescence, circular dichroism (CD), and infra red spectroscopy. However, the Au nanoparticle-enzyme composites served as excellent catalyst for the reduction of p-nitrophenol and resazurin, with the catalytic activity varying with size and shape of the nanoparticles. The presence of pepsin as the surface stabilizer played a crucial role in the activity of the Au nanoparticles as reduction catalysts, as the approach of the reacting molecules to the nanoparticle surface was actively controlled by the stabilizing enzyme.

  18. Enhanced catalytic activity and inhibited biofouling of cathode in microbial fuel cells through controlling hydrophilic property

    Science.gov (United States)

    Li, Da; Liu, Jia; Wang, Haiman; Qu, Youpeng; Zhang, Jie; Feng, Yujie

    2016-11-01

    The hydrophilicity of activated carbon cathode directly determines the distribution of three-phase interfaces where oxygen reduction occurs. In this study, activated carbon cathodes are fabricated by using hydrophobic polytetrafluoroethylene (PTFE) and amphiphilic LA132 at various weight ratio to investigate the effect of hydrophilic property on cathode performance. Contact angle tests confirm the positive impact of LA132 content on hydrophilicity. Cathode with 67 wt% LA132 content shows the highest electrochemical activity as exchange current density increases by 71% and charge transfer resistance declines by 44.6% compared to that of PTFE cathode, probably due to the extended reaction interfaces by optimal hydrophilicity of cathode so that oxygen reduction is facilitated. As a result, the highest power density of 1171 ± 71 mW m-2 is obtained which is 14% higher than PTFE cathode. In addition to the hydrophilicity, this cathode had more negative charged surface of catalyst layer, therefore the protein content of cathodic biofilm decreased by 47.5%, indicating the effective bacterial inhibition when 67 wt% LA132 is used. This study shows that the catalytic activity of cathode is improved by controlling proper hydrophilicity of cathode, and that biofilm can be reduced by increasing hydrophilicity and lowering the surface potential.

  19. Catalytic stimulation by restrained active-site floppiness--the case of high density lipoprotein-bound serum paraoxonase-1.

    Science.gov (United States)

    Ben-David, Moshe; Sussman, Joel L; Maxwell, Christopher I; Szeler, Klaudia; Kamerlin, Shina C L; Tawfik, Dan S

    2015-03-27

    Despite the abundance of membrane-associated enzymes, the mechanism by which membrane binding stabilizes these enzymes and stimulates their catalysis remains largely unknown. Serum paraoxonase-1 (PON1) is a lipophilic lactonase whose stability and enzymatic activity are dramatically stimulated when associated with high-density lipoprotein (HDL) particles. Our mutational and structural analyses, combined with empirical valence bond simulations, reveal a network of hydrogen bonds that connect HDL binding residues with Asn168--a key catalytic residue residing >15Å from the HDL contacting interface. This network ensures precise alignment of N168, which, in turn, ligates PON1's catalytic calcium and aligns the lactone substrate for catalysis. HDL binding restrains the overall motion of the active site and particularly of N168, thus reducing the catalytic activation energy barrier. We demonstrate herein that disturbance of this network, even at its most far-reaching periphery, undermines PON1's activity. Membrane binding thus immobilizes long-range interactions via second- and third-shell residues that reduce the active site's floppiness and pre-organize the catalytic residues. Although this network is critical for efficient catalysis, as demonstrated here, unraveling these long-rage interaction networks is challenging, let alone their implementation in artificial enzyme design.

  20. Surface structure and catalytic activity of electrodeposited Ni-Fe-Co-Mo alloy electrode by partially leaching Mo and Fe

    Institute of Scientific and Technical Information of China (English)

    LUO Bei-ping; GONG Zhu-qing; REN Bi-ye; YANG Yu-fang; CHEN Meng-jun

    2006-01-01

    Ni-Fe-Mo-Co alloy electrode was prepared in a citrate solution by electrodeposition, and then Mo and Fe were partially leached out from the electrode in 30% KOH solution. The unique surface micromorphology of a hive-like structure was obtained with an average pore size of about 50 nm. The electrode has a very large real surface area and a stable structure. The effects of sodium molybdate concentration on the composition, surface morphology, and structure of electrodes were analyzed by EDS, SEM and XRD. The polarization curves of the different electrodes show that the catalytic activity of electrodes is strongly correlated with the mole fraction of alloy elements (Ni, Fe, Mo, Co), and the addition of cobalt element to Ni-Fe-Mo alloy improves the catalytic activity. The Ni35.63Fe24.67Mo23.52Co16.18 electrode has the best activity for hydrogen evolution reaction(HER), with an over-potential of 66.2 mV, in 30% KOH at 80 ℃ and 200 mA/cm2. The alloy maintains its good catalytic activity for HER during continuous or intermittent electrolysis. Its electrochemical activity and catalytic stability are much higher than the other iron-group with Mo alloy electrodes.

  1. COMPARISON OF CATALYTIC ACTIVITIES BOTH FOR SELECTIVE OXIDATION AND DECOMPOSITION OF AMMONIA OVER Fe/HZβ CATALYST

    Directory of Open Access Journals (Sweden)

    YELİZ ÇETİN

    2016-11-01

    Full Text Available Ammonia is one of the syngas contaminants that must be removed before using the syngas downstream applications. The most promising hot-gas clean-up techniques of ammonia are selective catalytic oxidation (SCO and catalytic decomposition. In this study, the catalytic activities over Zeolite Hβ supported iron catalyst (Fe/HZβ were compared both for the two catalytic routes. For SCO experiments; temperature (300-550 °C, O2 (2000-6000 ppmv and (0-10% H2 concentrations were investigated with the presence of 800 ppm NH3 in each of the final gas mixture. In the second route, catalytic ammonia decomposition experiments were carried out with H2 in balance N2 (0-30% containing 800 ppm NH3 at 700°C and 800°C. In the SCO, NH3 conversions were increased with increasing reaction temperatures with the absence of H2 in the reaction mixture. With 10% H2, it was shown that NH3 conversions increased with decreasing the reaction temperature. This was interpreted as the competing H2 and NH3 oxidations over the catalyst. On the other hand, in the catalytic decomposition, thermodynamic equilibrium conversion of almost 100% was attained at both 700 and 800 °C. Upon H2 addition, all conversions decreased. The decrease in conversion seemed to be linear with inlet hydrogen concentration. Hydrogen was seen to inhibit ammonia decomposition reaction. It was shown that Fe/HZβ catalyst is better to use for catalytic decomposition of NH3 in syngas rather than SCO of NH3 in spite of higher reaction temperatures needed in the decomposition reaction.

  2. Overcoming the limitations of directed C-H functionalizations of heterocycles.

    Science.gov (United States)

    Liu, Yue-Jin; Xu, Hui; Kong, Wei-Jun; Shang, Ming; Dai, Hui-Xiong; Yu, Jin-Quan

    2014-11-20

    In directed C-H activation reactions, any nitrogen or sulphur atoms present in heterocyclic substrates will coordinate strongly with metal catalysts. This coordination, which can lead to catalyst poisoning or C-H functionalization at an undesired position, limits the application of C-H activation reactions in heterocycle-based drug discovery, in which regard they have attracted much interest from pharmaceutical companies. Here we report a robust and synthetically useful method that overcomes the complications associated with performing C-H functionalization reactions on heterocycles. Our approach employs a simple N-methoxy amide group, which serves as both a directing group and an anionic ligand that promotes the in situ generation of the reactive PdX2 (X = ArCONOMe) species from a Pd(0) source using air as the sole oxidant. In this way, the PdX2 species is localized near the target C-H bond, avoiding interference from any nitrogen or sulphur atoms present in the heterocyclic substrates. This reaction overrides the conventional positional selectivity patterns observed with substrates containing strongly coordinating heteroatoms, including nitrogen, sulphur and phosphorus. Thus, this operationally simple aerobic reaction demonstrates that it is possible to bypass a fundamental limitation that has long plagued applications of directed C-H activation in medicinal chemistry.

  3. Identification of collagen binding domain residues that govern catalytic activities of matrix metalloproteinase-2 (MMP-2).

    Science.gov (United States)

    Mikhailova, Margarita; Xu, Xiaoping; Robichaud, Trista K; Pal, Sanjay; Fields, Gregg B; Steffensen, Bjorn

    2012-01-01

    An innovative approach to enhance the selectivity of matrix metalloproteinase (MMP) inhibitors comprises targeting these inhibitors to catalytically required substrate binding sites (exosites) that are located outside the catalytic cleft. In MMP-2, positioning of collagen substrate molecules occurs via a unique fibronectin-like domain (CBD) that contains three distinct modular collagen binding sites. To characterize the contributions of these exosites to gelatinolysis by MMP-2, seven MMP-2 variants were generated with single, or concurrent double and triple alanine substitutions in the three fibronectin type II modules of the CBD. Circular dichroism spectroscopy verified that recombinant MMP-2 wild-type (WT) and variants had the same fold. Moreover, the MMP-2 WT and variants had the same activity on a short FRET peptide substrate that is hydrolyzed independently of CBD binding. Among single-point variants, substitution in the module 3 binding site had greatest impact on the affinity of MMP-2 for gelatin. Simultaneous substitutions in two or three CBD modules further reduced gelatin binding. The rates of gelatinolysis of MMP-2 variants were reduced by 20-40% following single-point substitutions, by 60-75% after double-point modifications, and by >90% for triple-point variants. Intriguingly, the three CBD modules contributed differentially to cleavage of dissociated α-1(I) and α-2(I) collagen chains. Importantly, kinetic analyses (k(cat)/K(m)) revealed that catalysis of a triple-helical FRET peptide substrate by MMP-2 relied primarily on the module 3 binding site. Thus, we have identified three collagen binding site residues that are essential for gelatinolysis and constitute promising targets for selective inhibition of MMP-2.

  4. Effect of oxidation and catalytic reduction of trace organic contaminants on their activated carbon adsorption.

    Science.gov (United States)

    Schoutteten, Klaas V K M; Hennebel, Tom; Dheere, Ellen; Bertelkamp, Cheryl; De Ridder, David J; Maes, Synthia; Chys, Michael; Van Hulle, Stijn W H; Vanden Bussche, Julie; Vanhaecke, Lynn; Verliefde, Arne R D

    2016-12-01

    The combination of ozonation and activated carbon (AC) adsorption is an established technology for removal of trace organic contaminants (TrOCs). In contrast to oxidation, reduction of TrOCs has recently gained attention as well, however less attention has gone to the combination of reduction with AC adsorption. In addition, no literature has compared the removal behavior of reduction vs. ozonation by-products by AC. In this study, the effect of pre-ozonation vs pre-catalytic reduction on the AC adsorption efficiency of five TrOCs and their by-products was compared. All compounds were susceptible to oxidation and reduction, however the catalytic reductive treatment proved to be a slower reaction than ozonation. New oxidation products were identified for dinoseb and new reduction products were identified for carbamazepine, bromoxynil and dinoseb. In terms of compatibility with AC adsorption, the influence of the oxidative and reductive pretreatments proved to be compound dependent. Oxidation products of bromoxynil and diatrizoic acid adsorbed better than their parent TrOCs, but oxidation products of atrazine, carbamazepine and dinoseb showed a decreased adsorption. The reductive pre-treatment showed an enhanced AC adsorption for dinoseb and a major enhancement for diatrizoic acid. For atrazine and bromoxynil, no clear influence on adsorption was noted, while for carbamazepine, the reductive pretreatment resulted in a decreased AC affinity. It may thus be concluded that when targeting mixtures of TrOCs, a trade-off will undoubtedly have to be made towards overall reactivity and removal of the different constituents, since no single treatment proves to be superior to the other.

  5. Evaluation of Performance Catalytic Ozonation Process with Activated Carbon in the Removal of Humic Acids from Aqueous Solutions

    Directory of Open Access Journals (Sweden)

    Gh. Asgari

    2011-01-01

    Full Text Available Introduction & Objective: In recent years, the use of alternative disinfectants and the control of natural organic matters are two approaches that are typically applied in water treatment utilities to reduce the formation of chlorinated disinfection by-products. Catalytic ozonation is a new technology used to promote the efficiency of ozonation. The goal of this study was to survey the feasibility application of activated carbon as a catalyst in ozonation process for removal of humic acids from aqueous solution. Materials & Methods: This experimental study has been done in laboratory of water and wastewater chemistry, Tarbiat Modarres University. The solid structure and chemical composition of activated carbon were analyzed by X-ray fluorescence (XRF. Ozonation and catalytic ozonation experiments were performed in a semi-batch reactor and the mass of ozone produced was measured by iodometric titration methods. Concentration changes of humic acid in samples with a concentration of 15 mg/l were determined by using spectrophotometer at an absorbance wavelength of 254 nm. To evaluate the performance of catalytic ozonation in humic acid removal, total organic carbon and trihalomethane formation potential were evaluated and the results were analyzed by Excel software. Results: Catalytic ozone results showed that using activated carbon as a catalyst increased humic acid decomposition up to 11 times and removal efficiency increased with increasing pH (4-12 and catalyst dosage (0.25-1.5 g/250cc. The experimental results showed that catalytic ozonation was most effective in less time (10 min with considerable efficiency (95% compared to the sole ozonation process (SOP. Conclusion: The results indicated that the catalytic ozonation process, compared to SOP, was less affected by radical scavenger, and total organic carbon, and trihalomethane formation potential removal achieved were 30% and 83%, respectively. (Sci J Hamadan Univ Med Sci 2011;17(4:25-33

  6. Inhibition of the ATPase activity of the catalytic portion of ATP synthases by cationic amphiphiles.

    Science.gov (United States)

    Datiles, Manuel J; Johnson, Eric A; McCarty, Richard E

    2008-04-01

    Melittin, a cationic, amphiphilic polypeptide, has been reported to inhibit the ATPase activity of the catalytic portions of the mitochondrial (MF1) and chloroplast (CF1) ATP synthases. Gledhill and Walker [J.R. Gledhill, J.E. Walker. Inhibition sites in F1-ATPase from bovine heart mitochondria, Biochem. J. 386 (2005) 591-598.] suggested that melittin bound to the same site on MF1 as IF1, the endogenous inhibitor polypeptide. We have studied the inhibition of the ATPase activity of CF1 and of F1 from Escherichia coli (ECF1) by melittin and the cationic detergent, cetyltrimethylammonium bromide (CTAB). The Ca2+- and Mg2+-ATPase activities of CF1 deficient in its inhibitory epsilon subunit (CF1-epsilon) are sensitive to inhibition by melittin and by CTAB. The inhibition of Ca2+-ATPase activity by CTAB is irreversible. The Ca2+-ATPase activity of F1 from E. coli (ECF1) is inhibited by melittin and the detergent, but Mg2+-ATPase activity is much less sensitive to both reagents. The addition of CTAB or melittin to a solution of CF1-epsilon or ECF1 caused a large increase in the fluorescence of the hydrophobic probe, N-phenyl-1-naphthylamine, indicating that the detergent and melittin cause at least partial dissociation of the enzymes. ATP partially protects CF1-epsilon from inhibition by CTAB. We also show that ATP can cause the aggregation of melittin. This result complicates the interpretation of experiments in which ATP is shown to protect enzyme activity from inhibition by melittin. It is concluded that melittin and CTAB cause at least partial dissociation of the alpha/beta heterohexamer.

  7. Preparation and Acid Catalytic Activity of TiO2 Grafted Silica MCM-41 with Sulfate Treatment

    Institute of Scientific and Technical Information of China (English)

    Dai-shi Guo; Zi-feng Ma; Chun-sheng Yin; Qi-zhong Jiang

    2008-01-01

    TiO2 grafted silica MCM-41 catalyst with and without sulfate treatment were prepared.The structural and acid properties of these materials were investigated by XRD,N2 adsorption-desorption,element analysis,thermal analysis,Raman and FTIR measurements.Their acid-catalytic activities were evaluated using the cyclization reaction of pseudoionone.It was found that the obtained materials possess well-ordered mesostructure,and the grafted TiO2 components were in highly dispersed amorphous form.T/MCM41 without sulfation contained only Lewis acid sites,while Br(o)nsted and Lewis acidities were remarkably improved for the sulfated materials ST/MCM41 and d-ST/MCM41.T/MCM-41 was not active for the cyclization reaction of pseudoionone,but ST/MCM-41 and d-ST/MCM-41 possessed favorable catalytic activities.The catalytic performance of ST/MCM-41 was comparable with that of the commercial solid acid catalyst of Amberlyst-15,and better than that of d-ST/MCM-41,although the latter underwent a second TiO2 grafting process and accordingly had higher Ti and S content.The specific surface structure of Si-O-Ti-O-S=O in ST/MCM-41 and the bilateral induction effect of Si and S=O on Si-O-Ti bonds were speculated to account for its higher acid catalytic activity.

  8. Understanding Catalytic Activity Trends for NO Decomposition and CO Oxidation using Density Functional Theory and Microkinetic Modeling

    DEFF Research Database (Denmark)

    Falsig, Hanne

    -relations between transition energies and adsorption energies. We establish a simple kinetic framework within the Sabatier analysis and obtain trends in catalytic activity based on the descriptors EO and ECO. We show that gold nanoparticles are optimal catalysts for low temperature CO oxidation and Pt closed packed...

  9. Confirmation of Isolated Cu2+ Ions in SSZ-13 Zeolite as Active Sites in NH3-Selective Catalytic Reduction

    NARCIS (Netherlands)

    Deka, U.; Juhin, A.F.; Eilertsen, E.A.; Emerich, H.; Green, M.A.; Korhonen, S.T.; Weckhuysen, B.M.; Beale, A.M.

    2012-01-01

    NH3-Selective Catalytic Reduction (NH3-SCR) is a widely used technology for NOx reduction in the emission control systems of heavy duty diesel vehicles. Copper-based ion exchanged zeolites and in particular Cu-SSZ-13 (CHA framework) catalysts show both exceptional activity and hydrothermal stability

  10. Treatment of organic pollutants in coke plant wastewater by the method of ultrasonic irradiation, catalytic oxidation and activated sludge

    NARCIS (Netherlands)

    Ning, Ping; Bart, Hans-Jörg; Jiang, Yijiao; de Haan, A.B.; Tien, C.

    2005-01-01

    The paper deals with the degradation of the organic pollutants in coke plant wastewater by the combination process of ultrasonic irradiation, catalytic oxidation and activated sludge. The effect factors of ultrasonic irradiation on the degradation of the organic pollutants such as saturating gas,

  11. Preparation of Au-Pd bimetallic nanoparticles in porous germania nanospheres: A study of their morphology and catalytic activity

    Energy Technology Data Exchange (ETDEWEB)

    Regan, Maureen R. [Department of Chemistry, Fordham University, 441, East Fordham Road, Bronx, NY 10458 (United States); Banerjee, Ipsita A. [Department of Chemistry, Fordham University, 441, East Fordham Road, Bronx, NY 10458 (United States)]. E-mail: banerjee@fordham.edu

    2006-03-15

    Size controlled Au-Pd bimetallic nanoparticles with an average size of 7-10 nm were grown in porous germania nanospheres. The properties of the resulting nanocomposites were characterized by electron microscopy, energy dispersive spectroscopy, and ultraviolet-visible spectroscopy. The catalytic activity of the nanocomposites was also examined by studying the degradation of p-nitroaniline.

  12. The role of transition metal sulfides in hydrotreatment. 3. Acidity, XPS and catalytic activity

    Energy Technology Data Exchange (ETDEWEB)

    De Agudelo, M.M.; Reyes, L.G.; Do Campo, N.

    1987-05-15

    Although, recently, most of the research on catalysis has been devoted to hydrotreatment, attention has been paid to hydrodesulfurization (HDS) but very little has been done on hydrodemetallization (HDM). This article is part of a systematic study directed towards defining the role of transition metal sulfides in hydrotreatment reactions. Catalysts supported on silica or alumina have been considered. Acidity has been evaluated using pyridine as probe molecule. This property can be attributed to the sulfide phase of the catalysts. The alumina supported catalysts were more acid than the silica supported catalysts. Since the acidity might exclusively be of Lewis type, the pattern observed through the first row transition metal sulfides reflects the trend of the electron-acceptor character of these sulfides. The XPS results indicate that catalysts are partially sulfided (at 400 C). At the same time, the results corroborate a better Me-support interaction on alumina than on silica. The HDM and HDS intrinsic activities, using a desalphalted (DAO) Morichal as feed were evaluated normalizing conversion in terms of the surface metal sites per surface area. The intrinsic activity patterns obtained for the first row transition metal sulfides, were very similar to those mentioned of acidity, reaffirming the importance of the electronic structure of the sulfide phase on its catalytic activity. 21 refs.

  13. Synthesis and bio-catalytic activity of isostructural cobalt(III)-phenanthroline complexes

    Indian Academy of Sciences (India)

    Dhananjay Dey; Arnab Basu Roy; Anandan Ranjani; Loganathan Gayathri; Saravanan Chandraleka; Dharumadurai Dhanasekaran; Mohammad Abdulkader Akbarsha; Chung-Yu Shen; Hui-Lien Tsai; Milan Maji; Niranjan Kole; Bhaskar Biswas

    2015-04-01

    We have synthesized two isostructural mononuclear cobalt(III) complexes [1]NO3·3H2O and [1]NO3·CH3CO2H·H2O {[1]+ = [Co(1,10-phenanthroline)2Cl2]+} and characterized by single crystal X-ray structural analyses. Mass spectral studies of the complexes indicate both the compounds to produce identical cationic species viz., [Co(phen)2Cl2]+ in methanol solution. [1]+ has been evaluated as model system for the catechol oxidase enzyme by using 3,5-di-tert-butylcatechol (3,5-DTBC) as the substrate in methanol medium, which revealed that the cationic complex efficiently inhibits catalytic activity with kcat value 9.65 × 102 h−1. [1]+ cleaved pBR 322 DNA without addition of an activating agent. Further, the anti-cancer activity of [1]+ on human hepatocarcinoma cell line (HepG2) has been examined. The induction of apoptosis induced in the cell line was assessed base on the changes in cell morphology, which showed the efficacy of [1]+ to induce apoptosis in 53% of cells during 24 h treatment. Interestingly, the observed IC50 values reveal that [1]+ brings about conformational change on DNA strongly and exhibits remarkable cytotoxicity.

  14. Catalytically-active inclusion bodies-Carrier-free protein immobilizates for application in biotechnology and biomedicine.

    Science.gov (United States)

    Krauss, Ulrich; Jäger, Vera D; Diener, Martin; Pohl, Martina; Jaeger, Karl-Erich

    2017-09-20

    Bacterial inclusion bodies (IBs) consist of unfolded protein aggregates and represent inactive waste products often accumulating during heterologous overexpression of recombinant genes in Escherichia coli. This general misconception has been challenged in recent years by the discovery that IBs, apart from misfolded polypeptides, can also contain substantial amounts of active and thus correctly or native-like folded protein. The corresponding catalytically-active inclusion bodies (CatIBs) can be regarded as a biologically-active sub-micrometer sized biomaterial or naturally-produced carrier-free protein immobilizate. Fusion of polypeptide (protein) tags can induce CatIB formation paving the way towards the wider application of CatIBs in synthetic chemistry, biocatalysis and biomedicine. In the present review we summarize the history of CatIBs, present the molecular-biological tools that are available to induce CatIB formation, and highlight potential lines of application. In the second part findings regarding the formation, architecture, and structure of (Cat)IBs are summarized. Finally, an overview is presented about the available bioinformatic tools that potentially allow for the prediction of aggregation and thus (Cat)IB formation. This review aims at demonstrating the potential of CatIBs for biotechnology and hopefully contributes to a wider acceptance of this promising, yet not widely utilized, protein preparation. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. Mechanism of TRIM25 Catalytic Activation in the Antiviral RIG-I Pathway

    Directory of Open Access Journals (Sweden)

    Jacint G. Sanchez

    2016-08-01

    Full Text Available Antiviral response pathways induce interferon by higher-order assembly of signaling complexes called signalosomes. Assembly of the RIG-I signalosome is regulated by K63-linked polyubiquitin chains, which are synthesized by the E3 ubiquitin ligase, TRIM25. We have previously shown that the TRIM25 coiled-coil domain is a stable, antiparallel dimer that positions two catalytic RING domains on opposite ends of an elongated rod. We now show that the RING domain is a separate self-association motif that engages ubiquitin-conjugated E2 enzymes as a dimer. RING dimerization is required for catalysis, TRIM25-mediated RIG-I ubiquitination, interferon induction, and antiviral activity. We also provide evidence that RING dimerization and E3 ligase activity are promoted by binding of the TRIM25 SPRY domain to the RIG-I effector domain. These results indicate that TRIM25 actively participates in higher-order assembly of the RIG-I signalosome and helps to fine-tune the efficiency of the RIG-I-mediated antiviral response.

  16. Antitumour, antimicrobial and catalytic activity of gold nanoparticles synthesized by different pH propolis extracts

    Energy Technology Data Exchange (ETDEWEB)

    Gatea, Florentina; Teodor, Eugenia Dumitra, E-mail: eu-teodor@yahoo.com [National Institute for Biological Sciences, Centre of Bioanalysis (Romania); Seciu, Ana-Maria [National Institute for Biological Sciences, Cellular and Molecular Biology Department (Romania); Covaci, Ovidiu Ilie [SARA Pharm Solutions (Romania); Mănoiu, Sorin [National Institute for Biological Sciences, Cellular and Molecular Biology Department (Romania); Lazăr, Veronica [University of Bucharest, Faculty of Biology (Romania); Radu, Gabriel Lucian [University “Politehnica” Bucharest, Faculty of Applied Chemistry and Materials Science (Romania)

    2015-07-15

    The Romanian propolis was extracted in five different media, respectively, in water (pH 6.8), glycine buffer (pH 2.5), acetate buffer (pH 5), phosphate buffer (pH 7.4) and carbonate buffer (pH 9.2). The extracts presented different amounts of flavonoids and phenolic acids, increasing pH leading to higher concentrations of active compounds. Five variants of gold nanoparticles suspensions based on different pH Romanian propolis aqueous extracts were successfully synthesized. The obtained nanoparticles presented dimensions between 20 and 60 nm in dispersion form and around 18 nm in dried form, and different morphologies (spherical, hexagonal, triangular). Fourier transform infrared spectroscopy proved the attachment of organic compounds from propolis extracts to the colloidal gold suspensions and X-ray diffraction certified that the suspensions contain metallic gold. The obtained propolis gold nanoparticles do not exhibit any antibacterial or antifungal activity, but presented different catalytic activities and toxicity on tumour cells.

  17. Antitumour, antimicrobial and catalytic activity of gold nanoparticles synthesized by different pH propolis extracts

    Science.gov (United States)

    Gatea, Florentina; Teodor, Eugenia Dumitra; Seciu, Ana-Maria; Covaci, Ovidiu Ilie; Mănoiu, Sorin; Lazăr, Veronica; Radu, Gabriel Lucian

    2015-07-01

    The Romanian propolis was extracted in five different media, respectively, in water (pH 6.8), glycine buffer (pH 2.5), acetate buffer (pH 5), phosphate buffer (pH 7.4) and carbonate buffer (pH 9.2). The extracts presented different amounts of flavonoids and phenolic acids, increasing pH leading to higher concentrations of active compounds. Five variants of gold nanoparticles suspensions based on different pH Romanian propolis aqueous extracts were successfully synthesized. The obtained nanoparticles presented dimensions between 20 and 60 nm in dispersion form and around 18 nm in dried form, and different morphologies (spherical, hexagonal, triangular). Fourier transform infrared spectroscopy proved the attachment of organic compounds from propolis extracts to the colloidal gold suspensions and X-ray diffraction certified that the suspensions contain metallic gold. The obtained propolis gold nanoparticles do not exhibit any antibacterial or antifungal activity, but presented different catalytic activities and toxicity on tumour cells.

  18. The activity and selectivity of catalytic peroxide oxidation of chlorophenols over Cu-Al hydrotalcite/clay composite.

    Science.gov (United States)

    Zhou, Shiwei; Gu, Chuantao; Qian, Zhenying; Xu, Jinguang; Xia, Chuanhai

    2011-05-15

    Liquid phase catalytic oxidation of chlorophenols (CPs) was carried out over Cu-Al hydrotalcite/clay composite at ambient temperature and pressure using hydrogen peroxide as oxidant. The results showed that the catalyst had high catalytic activity, with complete oxidation of 4-CP within 40 min at 40 °C. The content and position of chlorine on the aromatic ring had significantly different effects on the oxidation rate of CPs, with the rate sequence of phenol > monochlorophenol (MCP) > dichlorophenol (DCP) > trichlorophenol (TCP), 3-CP > 2-CP > 4-CP, and 3,5-DCP > 3,4-DCP > 2,5-DCP > 2,4-DCP > 2,6-DCP. This was ascribed to the interactions among σ-electron withdrawing conductive effect, π-electron donating conjugative effect, and steric hindrance effect of chlorine. It was evidenced that the catalytic peroxide oxidation of CPs in the first step was selective and rate-limiting, where chlorinated 1,4-benzoquinones formed.

  19. Nanocomposite W-C : H diamond-like carbon coatings

    NARCIS (Netherlands)

    Strondl, Carl Gunnar Christian

    2007-01-01

    It has been demonstrated that the rotation speed of the substrate table and the gas flow rate of acetylene gas are important process parameters for determining the nano/micro-structure of W-C:H coatings. Either a homogeneous or a pronounced multilayer or a nanocomposite structure of the W-C:H

  20. Characterization of the catalytic activity of the membrane-anchored metalloproteinase ADAM15 in cell-based assays.

    Science.gov (United States)

    Maretzky, Thorsten; Yang, Guangli; Ouerfelli, Ouathek; Overall, Christopher M; Worpenberg, Susanne; Hassiepen, Ulrich; Eder, Joerg; Blobel, Carl P

    2009-04-28

    ADAM15 (a disintegrin and metalloproteinase 15) is a membrane-anchored metalloproteinase, which is overexpressed in several human cancers and has been implicated in pathological neovascularization and prostate cancer metastasis. Yet, little is known about the catalytic properties of ADAM15. Here, we purified soluble recombinant ADAM15 to test for its ability to cleave a library of peptide substrates. However, we found no processing of any of the peptide substrates tested here, and therefore turned to cell-based assays to characterize the catalytic properties of ADAM15. Overexpression of full-length membrane-anchored ADAM15 or the catalytically inactive ADAM15E-->A together with various membrane proteins resulted in increased release of the extracellular domain of the fibroblast growth factor receptor 2iiib (FGFR2iiib) by ADAM15, but not ADAM15E-->A. This provided a robust assay for a characterization of the catalytic properties of ADAM15 in intact cells. We found that increased expression of ADAM15 resulted in increased FGFR2iiib shedding, but that ADAM15 was not stimulated by phorbol esters or calcium ionophores, two commonly used activators of ectodomain shedding. Moreover, ADAM15-dependent processing of FGFR2iiib was inhibited by the hydroxamate-based metalloproteinase inhibitors marimastat, TAPI-2 and GM6001, and by 50 nM TIMP-3 (tissue inhibitor of metalloproteinases 3), but not by 100 nM TIMP-1, and only weakly by 100 nM TIMP-2. These results define key catalytic properties of ADAM15 in cells and its response to stimulators and inhibitors of ectodomain shedding. A cell-based assay for the catalytic activity of ADAM15 could aid in identifying compounds, which could be used to block the function of ADAM15 in pathological neovascularization and cancer.

  1. Bifunctional Molecular Photoswitches Based on Overcrowded Alkenes for Dynamic Control of Catalytic Activity in Michael Addition Reactions.

    Science.gov (United States)

    Pizzolato, Stefano F; Collins, Beatrice S L; van Leeuwen, Thomas; Feringa, Ben L

    2017-05-02

    The emerging field of artificial photoswitchable catalysis has recently shown striking examples of functional light-responsive systems allowing for dynamic control of activity and selectivity in organocatalysis and metal-catalysed transformations. While our group has already disclosed systems featuring first generation molecular motors as the switchable central core, a design based on second generation molecular motors is lacking. Here, the syntheses of two bifunctionalised molecular switches based on a photoresponsive tetrasubstituted alkene core are reported. They feature a thiourea substituent as hydrogen-donor moiety in the upper half and a basic dimethylamine group in the lower half. This combination of functional groups offers the possibility for application of these molecules in photoswitchable catalytic processes. The light-responsive central cores were synthesized by a Barton-Kellogg coupling of the prefunctionalized upper and lower halves. Derivatization using Buchwald-Hartwig amination and subsequent introduction of the thiourea substituent afforded the target compounds. Control of catalytic activity in the Michael addition reaction between (E)-3-bromo-β-nitrostyrene and 2,4-pentanedione is achieved upon irradiation of stable-(E) and stable-(Z) isomers of the bifunctional catalyst 1. Both isomers display a decrease in catalytic activity upon irradiation to the metastable state, providing systems with the potential to be applied as ON/OFF catalytic photoswitches. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. Catalytic conversion of methane to methanol using Cu-zeolites.

    Science.gov (United States)

    Alayon, Evalyn Mae C; Nachtegaal, Maarten; Ranocchiari, Marco; van Bokhoven, Jeroen A

    2012-01-01

    The conversion of methane to value-added liquid chemicals is a promising answer to the imminent demand for fuels and chemical synthesis materials in the advent of a dwindling petroleum supply. Current technology requires high energy input for the synthesis gas production, and is characterized by low overall selectivity, which calls for alternative reaction routes. The limitation to achieve high selectivity is the high C-H bond strength of methane. High-temperature reaction systems favor gas-phase radical reactions and total oxidation. This suggests that the catalysts for methane activation should be active at low temperatures. The enzymatic-inspired metal-exchanged zeolite systems apparently fulfill this need, however, methanol yield is low and a catalytic process cannot yet be established. Homogeneous and heterogeneous catalytic systems have been described which stabilize the intermediate formed after the first C-H activation. The understanding of the reaction mechanism and the determination of the active metal sites are important for formulating strategies for the upgrade of methane conversion catalytic technologies.

  3. Restoration of catalytic activity beyond wild-type level in glucoamylase from Aspergillus awamori by oxidation of the Glu400-->Cys catalytic-base mutant to cysteinesulfinic acid.

    Science.gov (United States)

    Fierobe, H P; Mirgorodskaya, E; McGuire, K A; Roepstorff, P; Svensson, B; Clarke, A J

    1998-03-17

    Glucoamylase catalyzes the hydrolysis of glucosidic bonds with inversion of the anomeric configuration. Site-directed mutagenesis and three-dimensional structure determination of the glucoamylase from Aspergillus awamori previously identified Glu179 and Glu400 as the general acid and base catalyst, respectively. The average distance between the two carboxyl groups was measured to be 9.2 A, which is typical for inverting glycosyl hydrolases. In the present study, this distance was increased by replacing the catalytic base Glu400 with cysteine which was then oxidized to cysteinesulfinic acid. Initially, this oxidation occurred during attempts to carboxyalkylate the Cys400 residue with iodoacetic acid, 3-iodopropionic acid, or 4-bromobutyric acid. However, endoproteinase Lys-C digestion of modified glucoamylase followed by high-pressure liquid chromatography in combination with matrix-assisted laser desorption ionization/time-of-flight mass spectrometry on purified peptide fragments demonstrated that all enzyme derivatives contained the cysteinesulfinic acid oxidation product of Cys400. Subsequently, it was demonstrated that treatment of Glu400-->Cys glucoamylase with potassium iodide in the presence of bromine resulted in complete conversion to the cysteinesulfinic acid product. As expected, the catalytic base mutant Glu400-->Cys glucoamylase had very low activity, i.e., 0.2% compared to wild-type. The oxidation of Cys400 to cysteinesulfinic acid, however, restored activity (kcat) on alpha-1,4-linked substrates to levels up to 160% of the wild-type glucoamylase which corresponded to approximately a 700-fold increase in the kcat of the Glu400-->Cys mutant glucoamylase. Whereas Glu400-->Cys glucoamylase was much less thermostable and more sensitive to guanidinium chloride than the wild-type enzyme, the oxidation to cysteinesulfinic acid was accompanied by partial recovery of the stability.

  4. Catalytic Activity of Mono- and Bi-Metallic Nanoparticles Synthesized via Microemulsions

    Directory of Open Access Journals (Sweden)

    Ramona Y.G. König

    2014-07-01

    Full Text Available Water-in-oil (w/o microemulsions were used as a template for the synthesis of mono- and bi-metallic nanoparticles. For that purpose, w/o-microemulsions containing H2PtCl6, H2PtCl6 + Pb(NO32 and H2PtCl6 + Bi(NO3, respectively, were mixed with a w/o-microemulsion containing the reducing agent, NaBH4. The results revealed that it is possible to synthesize Pt, PtPb and PtBi nanoparticles of ~3–8 nm in diameter at temperatures of about 30°C. The catalytic properties of the bimetallic PtBi and PtPb nanoparticles were studied and compared with monometallic platinum nanoparticles. Firstly, the electrochemical oxidation of formic acid to carbon monoxide was investigated, and it was found that the resistance of the PtBi and PtPb nanoparticles against the catalyst-poisoning carbon monoxide was significantly higher compared to the Pt nanoparticles. Secondly, investigating the reduction of 4-nitrophenol to 4-aminophenol,we found that the bimetallic NPs are most active at 23 °C, while the order of the activity changes at higher temperatures, i.e., that the Pt nanoparticles are the most active ones at 36 and 49 °C. Furthermore, we observed a strong influence of the support, which was either a polymer or Al2O3. Thirdly, for the hydrogenation of allylbenzene to propylbenzene, the monometallic Pt NPs turned out to be the most active catalysts, followed by the PtPb and PtBi NPs. Comparing the two bimetallic nanoparticles, one sees that the PtPb NPs are significantly more active than the respective PtBi NPs.

  5. Absolute stereostructures of olibanumols A, B, C, H, I, and J from olibanum, gum-resin of Boswellia carterii, and inhibitors of nitric oxide production in lipopolysaccharide-activated mouse peritoneal macrophages.

    Science.gov (United States)

    Yoshikawa, Masayuki; Morikawa, Toshio; Oominami, Hideo; Matsuda, Hisashi

    2009-09-01

    Three new monoterpenes, olibanumols A (1), B (2), and C (3), and three new triterpenes, olibanumols H (4), I (5), and J (6), were isolated from olibanum, the exuded gum-resin from Boswellia carterii BIRDW. Their structures including the absolute configuration were determined by chemical and physicochemical evidence. Among the constituents, olibanumols A (1), H (4), and I (5), and isofouquierol (12) exhibited nitric oxide production inhibitory activity in lipopolysaccharide-activated mouse peritoneal macrophages.

  6. Small molecule regulation of self-association and catalytic activity in a supramolecular coordination complex.

    Science.gov (United States)

    McGuirk, C Michael; Stern, Charlotte L; Mirkin, Chad A

    2014-03-26

    Herein, we report the synthesis and characterization of the first weak-link approach (WLA) supramolecular construct that employs the small molecule regulation of intermolecular hydrogen bonding interactions for the in situ control of catalytic activity. A biaryl urea group, prone to self-aggregation, was functionalized with a phosphinoalkyl thioether (P,S) hemilabile moiety and incorporated into a homoligated Pt(II) tweezer WLA complex. This urea-containing construct, which has been characterized by a single crystal X-ray diffraction study, can be switched in situ from a rigid fully closed state to a flexible semiopen state via Cl(-) induced changes in the coordination mode at the Pt(II) structural node. FT-IR and (1)H NMR spectroscopy studies were used to demonstrate that while extensive urea self-association persists in the flexible semiopen complex, these interactions are deterred in the rigid, fully closed complex because of geometric and steric restraints. Consequently, the urea moieties in the fully closed complex are able to catalyze a Diels-Alder reaction between cyclopentadiene and methyl vinyl ketone to generate 2-acetyl-5-norbornene. The free urea ligand and the semiopen complex show no such activity. The successful incorporation and regulation of a hydrogen bond donating catalyst in a WLA construct open the doors to a vast and rapidly growing catalogue of allosteric catalysts for applications in the detection and amplification of organic analytes.

  7. A comparative DFT study of the catalytic activity of the 3d transition metal sulphides surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Gomez-Balderas, R. (Depto de F& amp; #237; s. y Qu& amp; #237; m. Te& amp; #243; rica. Edif. B, Fac. de Qu& amp; #237; mica, UNAM ); Oviedo-Roa, R (Instituto Mexicano del Petroleo); Martinez-Magadan, J M.(Instituto Mexicano del Petroleo); Amador, C. (Depto de F& amp; #237; s. y Qu& amp; #237; m. Te& amp; #243; rica. Edif. B, Fac. de Qu& amp; #237; mica, UNAM ); Dixon, David A.(BATTELLE (PACIFIC NW LAB))

    2002-10-10

    The catalytic activity of the first transition metal series sulphides for hydrodesulfurization (HDS) reactions exhibits a particular behaviour when analysed as a function of the metal position in the Periodic Table. This work reports a comparative study of the electronic structure of the bulk and of the (0 0 1) metal surface (assumed to be the reactive surface) for the Sc-Zn monosulphides. The systems were modeled using the NiAs prototype crystal structure for the bulk and by applying the supercell model with seven atomic layers for (0 0 1) surfaces. The electronic structure of closed-packed solids code based on the density-functional theory and adopting the muffin-tin approximation to the potential was employed in the calculations of the electronic properties. For the Co and Ni sulphides, the density of states (DOS) variations between the metal atom present in the bulk and the ones exposed at the surface show that at the surface, there exists a higher DOS in the occupied states region just below the Fermi level. This feature might indicate a good performance of these two metal sulphides substrates in the HDS reactions favouring a donation, back-donation mechanism. In contrast, the DOS at the surface of Mn is increased in the unoccupied states region, just above the Fermi level. This suggests the possibility of a strong interaction with charge dontating sulphur adsorbate atoms poisoning the active substrate surface.

  8. Adenylate kinase from Streptococcus pneumoniae is essential for growth through its catalytic activity

    Directory of Open Access Journals (Sweden)

    Trung Thanh Thach

    2014-01-01

    Full Text Available Streptococcus pneumoniae (pneumococcus infection causes more than 1.6 million deaths worldwide. Pneumococcal growth is a prerequisite for its virulence and requires an appropriate supply of cellular energy. Adenylate kinases constitute a major family of enzymes that regulate cellular ATP levels. Some bacterial adenylate kinases (AdKs are known to be critical for growth, but the physiological effects of AdKs in pneumococci have been poorly understood at the molecular level. Here, by crystallographic and functional studies, we report that the catalytic activity of adenylate kinase from S. pneumoniae (SpAdK serotype 2 D39 is essential for growth. We determined the crystal structure of SpAdK in two conformations: ligand-free open form and closed in complex with a two-substrate mimic inhibitor adenosine pentaphosphate (Ap5A. Crystallographic analysis of SpAdK reveals Arg-89 as a key active site residue. We generated a conditional expression mutant of pneumococcus in which the expression of the adk gene is tightly regulated by fucose. The expression level of adk correlates with growth rate. Expression of the wild-type adk gene in fucose-inducible strains rescued a growth defect, but expression of the Arg-89 mutation did not. SpAdK increased total cellular ATP levels. Furthermore, lack of functional SpAdK caused a growth defect in vivo. Taken together, our results demonstrate that SpAdK is essential for pneumococcal growth in vitro and in vivo.

  9. Microwave-assisted facile green synthesis of silver nanoparticles and spectroscopic investigation of the catalytic activity

    Indian Academy of Sciences (India)

    Siby Joseph; Beena Mathew

    2015-06-01

    Silver nanoparticles have been successfully synthesized in aqueous medium by a green, rapid and costefficient synthetic approach based on microwave irradiation. In this study, iota-carrageenan (I-carrageenan) is used both as reducing and stabilizing agent. The formation of nanoparticles is determined using UV–vis, Fourier transform infrared (FTIR), X-ray diffraction (XRD), energy-dispersive X-ray (EDX) and high-resolution-transmission electron microscopic (HR-TEM) analysis. Transmission electron microscopic (TEM) images show that the nanoparticles are of spherical shape with an average diameter of 18.2 nm. I-carrageenan-stabilized silver nanoparticles show outstanding catalytic activity for the reduction of 4-nitrophenol in the presence of NaBH4 in aqueous medium. The reaction follows pseudo-first-order kinetics and the reaction rate increases with the increase in amount of the catalyst. The study of the temperature dependence of reaction rate gives activation energy of 42.81 kJ mol−1. The synthesized silver nanoparticles are anticipated to be a promising material for pollution abatement.

  10. Single‐molecule mechanochemical characterization of E. coli pol III core catalytic activity

    Science.gov (United States)

    Naufer, M. Nabuan; Murison, David A.; Rouzina, Ioulia; Beuning, Penny J.

    2017-01-01

    Abstract Pol III core is the three‐subunit subassembly of the E. coli replicative DNA polymerase III holoenzyme. It contains the catalytic polymerase subunit α, the 3′ → 5′ proofreading exonuclease ε, and a subunit of unknown function, θ. We employ optical tweezers to characterize pol III core activity on a single DNA substrate. We observe polymerization at applied template forces F  30 pN. Both polymerization and exonucleolysis occur as a series of short bursts separated by pauses. For polymerization, the initiation rate after pausing is independent of force. In contrast, the exonucleolysis initiation rate depends strongly on force. The measured force and concentration dependence of exonucleolysis initiation fits well to a two‐step reaction scheme in which pol III core binds bimolecularly to the primer‐template junction, then converts at rate k 2 into an exo‐competent conformation. Fits to the force dependence of k init show that exo initiation requires fluctuational opening of two base pairs, in agreement with temperature‐ and mismatch‐dependent bulk biochemical assays. Taken together, our results support a model in which the pol and exo activities of pol III core are effectively independent, and in which recognition of the 3′ end of the primer by either α or ε is governed by the primer stability. Thus, binding to an unstable primer is the primary mechanism for mismatch recognition during proofreading, rather than an alternative model of duplex defect recognition. PMID:28263430

  11. Annealing crystallization and catalytic activity of ultrafine NiB amorphous alloy

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Annealing crystallization of ultrafine NiB amorphous alloy prepared by the chemical reduction method was studied by DTA,XRD and XAFS techniques. The XRD and XAFS results have revealed that the crystallization process of ultrafine NiB amorphous alloy proceeds in two steps. First,ultrafine NiB amorphous alloy is crystallized to form metastable nanocrystalline Ni3B at an annealing temperature of 325℃. Second,the nanocrystalline Ni3B is further decom-posed into crystalline Ni at 380℃ or higher tempera ture,the local structure around Ni atoms in resultant product is similar to that in Ni foil. It was found that the catalytic ac-tivity of nanocrystalline Ni3B for benzene hydrogenation is much higher than that of ultrafine NiB amorphous alloy or crystalline Ni. The result indicates that the active sites of nanocrystalline Ni3B for benzene hydrogenation are com-posed of both Ni and B with proper geometry configuration.

  12. Structure of the Photo-catalytically Active Surface of SrTiO 3

    Energy Technology Data Exchange (ETDEWEB)

    Plaza, Manuel; Huang, Xin; Ko, J. Y. Peter; Shen, Mei; Simpson, Burton H.; Rodríguez-López, Joaquín; Ritzert, Nicole L.; Letchworth-Weaver, Kendra; Gunceler, Deniz; Schlom, Darrell G.; Arias, Tomás A.; Brock, Joel D.; Abruña, Héctor D.

    2016-06-29

    A major goal of energy research is to use visible light to cleave water directly, without an applied voltage, into hydrogen and oxygen. Although SrTiO3 requires ultraviolet light, after four decades, it is still the "gold standard" for the photo-catalytic splitting of water. It is chemically robust and can carry out both hydrogen and oxygen evolution reactions without an applied bias. While ultrahigh vacuum surface science techniques have provided useful insights, we still know relatively little about the structure of these electrodes in contact with electrolytes under operating conditions. Here, we report the surface structure evolution of a n-SrTiO3 electrode during water splitting, before and after "training" with an applied positive bias. Operando high-energy X-ray reflectivity measurements demonstrate that training the electrode irreversibly reorders the surface. Scanning electrochemical microscopy at open circuit correlates this training with a 3-fold increase of the activity toward the photo-induced water splitting. A novel first-principles joint density functional theory simulation, constrained to the X-ray data via a generalized penalty function, identifies an anatase-like structure as the more active, trained surface.

  13. Histone acetyltransferase Hbo1: catalytic activity, cellular abundance, and links to primary cancers.

    Science.gov (United States)

    Iizuka, Masayoshi; Takahashi, Yoshihisa; Mizzen, Craig A; Cook, Richard G; Fujita, Masatoshi; Allis, C David; Frierson, Henry F; Fukusato, Toshio; Smith, M Mitchell

    2009-05-01

    In addition to the well-characterized proteins that comprise the pre-replicative complex, recent studies suggest that chromatin structure plays an important role in DNA replication initiation. One of these chromatin factors is the histone acetyltransferase (HAT) Hbo1 which is unique among HAT enzymes in that it serves as a positive regulator of DNA replication. However, several of the basic properties of Hbo1 have not been previously examined, including its intrinsic catalytic activity, its molecular abundance in cells, and its pattern of expression in primary cancer cells. Here we show that recombinant Hbo1 can acetylate nucleosomal histone H4 in vitro, with a preference for lysines 5 and 12. Using semi-quantitative western blot analysis, we find that Hbo1 is approximately equimolar with the number of active replication origins in normal human fibroblasts but is an order of magnitude more abundant in both MCF7 and Saos-2 established cancer cell lines. Immunohistochemistry for Hbo1 in 11 primary human tumor types revealed strong Hbo1 protein expression in carcinomas of the testis, ovary, breast, stomach/esophagus, and bladder.

  14. Controlled synthesis of Pd-Pt alloy hollow nanostructures with enhanced catalytic activities for oxygen reduction.

    Science.gov (United States)

    Hong, Jong Wook; Kang, Shin Wook; Choi, Bu-Seo; Kim, Dongheun; Lee, Sang Bok; Han, Sang Woo

    2012-03-27

    Pd-Pt alloy nanocrystals (NCs) with hollow structures such as nanocages with porous walls and dendritic hollow structures and Pd@Pt core-shell dendritic NCs could be selectively synthesized by a galvanic replacement method with uniform Pd octahedral and cubic NCs as sacrificial templates. Fine control over the degree of galvanic replacement of Pd with Pt allowed the production of Pd-Pt NCs with distinctly different morphologies. The synthesized hollow NCs exhibited considerably enhanced oxygen reduction activities compared to those of Pd@Pt core-shell NCs and a commercial Pt/C catalyst, and their electrocatalytic activities were highly dependent on their morphologies. The Pd-Pt nanocages prepared from octahedral Pd NC templates exhibited the largest improvement in catalytic performance. We expect that the present work will provide a promising strategy for the development of efficient oxygen reduction electrocatalysts and can also be extended to the preparation of other hybrid or hetero-nanostructures with desirable morphologies and functions. © 2012 American Chemical Society

  15. Highly basic CaO nanoparticles in mesoporous carbon materials and their excellent catalytic activity.

    Science.gov (United States)

    Raja, Pradeep Kumar; Chokkalingam, Anand; Priya, Subramaniam V; Balasubramanian, Veerappan V; Benziger, Mercy R; Aldeyab, Salem S; Jayavell, Ramasamy; Ariga, Katsukiho; Vinu, Ajayan

    2012-06-01

    Highly basic CaO nanoparticles immobilized mesoporous carbon materials (CaO-CMK-3) with different pore diameters have been successfully prepared by using wet-impregnation method. The prepared materials were subjected to extensive characterization studies using sophisticated techniques such as XRD, nitrogen adsorption, HRSEM-EDX, HRTEM and temperature programmed desorption of CO2 (TPD of CO2). The physico-chemical characterization results revealed that these materials possess highly dispersed CaO nanoparticles, excellent nanopores with well-ordered structure, high specific surface area, large specific pore volume, pore diameter and very high basicity. We have also demonstrated that the basicity of the CaO-CMK-3 samples can be controlled by simply varying the amount of CaO loading and pore diameter of the carbon support. The basic catalytic performance of the samples was investigated in the base-catalyzed transesterification of ethylacetoacetate by aryl, aliphatic and cyclic primary alcohols. CMK-3 catalyst with higher CaO loading and larger pore diameter was found to be highly active with higher conversion within a very short reaction time. The activity of 30% CaO-CMK3-150 catalyst for transesterification of ethylacetoacetate using different alcohols increases in the following order: octanol > butanol > cyclohexanol > benzyl alcohol > furfuryl alcohol.

  16. Metal nanoparticle/ionic liquid/cellulose: new catalytically active membrane materials for hydrogenation reactions.

    Science.gov (United States)

    Gelesky, Marcos A; Scheeren, Carla W; Foppa, Lucas; Pavan, Flavio A; Dias, Silvio L P; Dupont, Jairton

    2009-07-13

    Transition metal-containing membrane films of 10, 20, and 40 μm thickness were obtained by the combination of irregularly shaped nanoparticles with monomodal size distributions of 4.8 ± 1.1 nm (Rh(0)) and 3.0 ± 0.4 nm (Pt(0)) dispersed in the ionic liquid (IL) 1-n-butyl-3-methylimidazolium bis(trifluoromethane sulfonyl)imide (BMI·(NTf)(2)) with a syrup of cellulose acetate (CA) in acetone. The Rh(0) and Pt(0) metal concentration increased proportionally with increases in film thickness up to 20 μm, and then the material became metal saturated. The presence of small and stable Rh(0) or Pt(0) nanoparticles induced an augmentation in the CA/IL film surface areas. The augmentation of the IL content resulted in an increase of elasticity and decrease in tenacity and toughness, whereas the stress at break was not influenced. The introduction of IL probably causes an increase in the separation between the cellulose macromolecules that results in a higher flexibility, lower viscosity, and better formability of the cellulose material. The nanoparticle/IL/CA combinations exhibit an excellent synergistic effect that enhances the activity and durability of the catalyst for the hydrogenation of cyclohexene. The nanoparticle/IL/cellulose acetate film membranes display higher catalytic activity (up to 7353 h(-1) for the 20 μm film of CA/IL/Pt(0)) and stability than the nanoparticles dispersed only in the IL.

  17. Nanostructured Samarium Doped Fluorapatites and Their Catalytic Activity towards Synthesis of 1,2,4-Triazoles

    Directory of Open Access Journals (Sweden)

    Kranthi Kumar Gangu

    2016-09-01

    Full Text Available An investigation was conducted into the influence of the amino acids as organic modifiers in the facile synthesis of metal incorporated fluorapatites (FAp and their properties. The nanostructured Sm doped fluorapatites (Sm-FAp were prepared by a co-precipitation method using four different amino acids, namely glutamic acid, aspartic acid, glycine and histidine. The materials were characterized by various techniques including X-ray diffraction (XRD, Fourier transform infra-red spectroscopy (FT-IR, field emission scanning electron microscopy (FE-SEM, energy-dispersive X-ray spectroscopy (EDX, high resolution transmission electron microscopy (HR-TEM, N2-adsorption/desorption isotherm, temperature programmed desorption (TPD and fluorescence spectrophotometry. Under similar conditions, Sm-FAp prepared using different amino acids exhibited distinctly different morphological structures, surface area and pore properties. Their activity as catalysts was assessed and Sm-FAp/Glycine displayed excellent efficiency in the synthesis of 1,2,4-triazole catalyzing the reaction between 2-nitrobenzaldehyde and thiosemicarbazide with exceptional selectivity and 98% yield in a short time interval (10 min. The study provides an insight into the role of organic modifiers as controllers of nucleation, growth and aggregation which significantly influence the nature and activity of the catalytic sites on Sm-FAp. Sm-FAp could also have potential as photoactive material.

  18. Directed evolution of a histone acetyltransferase--enhancing thermostability, whilst maintaining catalytic activity and substrate specificity.

    Science.gov (United States)

    Leemhuis, Hans; Nightingale, Karl P; Hollfelder, Florian

    2008-11-01

    Histone acetylation plays an integral role in the epigenetic regulation of gene expression. Transcriptional activity reflects the recruitment of opposing classes of enzymes to promoter elements; histone acetyltransferases (EC 2.3.1.48) that deposit acetyl marks at a subset of histone residues and histone deacetylases that remove them. Many histone acetyltransferases are difficult to study in solution because of their limited stability once purified. We have developed a directed evolution protocol that allows the screening of hundreds of histone acetyltransferase mutants for histone acetylating activity, and used this to enhance the thermostability of the human P/CAF histone acetyltransferase. Two rounds of directed evolution significantly stabilized the enzyme without lowering the catalytic efficiency and substrate specificity of the enzyme. Twenty-four variants with higher thermostability were identified. Detailed analysis revealed twelve single amino acid mutants that were found to possess a higher thermostability. The residues affected are scattered over the entire protein structure, and are different from mutations predicted by sequence alignment approaches, suggesting that sequence comparison and directed evolution methods are complementary strategies in engineering increased protein thermostability. The stabilizing mutations are predominately located at surface of the enzyme, suggesting that the protein's surface is important for stability. The directed evolution approach described in the present study is easily adapted to other histone modifying enzymes, requiring only appropriate peptide substrates and antibodies, which are available from commercial suppliers.

  19. Methodology to assay CYP2E1 mixed function oxidase catalytic activity and its induction

    Directory of Open Access Journals (Sweden)

    Arthur I. Cederbaum

    2014-01-01

    Full Text Available The cytochrome P450 mixed function oxidase enzymes are the major catalysts involved in drug metabolism. There are many forms of P450. CYP2E1 metabolizes many toxicologically important compounds including ethanol and is active in generating reactive oxygen species. Since several of the contributions in the common theme series “Role of CYP2E1 and Oxidative/Nitrosative Stress in the Hepatotoxic Actions of Alcohol” discuss CYP2E1, this methodology review describes assays on how CYP2E1 catalytic activity and its induction by ethanol and other inducers can be measured using substrate probes such as the oxidation of para-nitrophenol to para-nitrocatechol and the oxidation of ethanol to acetaldehyde. Approaches to validate that a particular reaction e.g. oxidation of a drug or toxin is catalyzed by CYP2E1 or that induction of that reaction is due to induction of CYP2E1 are important and specific examples using inhibitors of CYP2E1, anti-CYP2E1 IgG or CYP2E1 knockout and knockin mice will be discussed.

  20. High yield expression of catalytically active USP18 (UBP43 using a Trigger Factor fusion system

    Directory of Open Access Journals (Sweden)

    Basters Anja

    2012-08-01

    Full Text Available Abstract Background Covalent linkage of the ubiquitin-like protein ISG15 interferes with viral infection and USP18 is the major protease which specifically removes ISG15 from target proteins. Thus, boosting ISG15 modification by protease inhibition of USP18 might represent a new strategy to interfere with viral replication. However, so far no heterologous expression system was available to yield sufficient amounts of catalytically active protein for high-throughput based inhibitor screens. Results High-level heterologous expression of USP18 was achieved by applying a chaperone-based fusion system in E. coli. Pure protein was obtained in a single-step on IMAC via a His6-tag. The USP18 fusion protein exhibited enzymatic activity towards cell derived ISG15 conjugated substrates and efficiently hydrolyzed ISG15-AMC. Specificity towards ISG15 was shown by covalent adduct formation with ISG15 vinyl sulfone but not with ubiquitin vinyl sulfone. Conclusion The results presented here show that a chaperone fusion system can provide high yields of proteins that are difficult to express. The USP18 protein obtained here is suited to setup high-throughput small molecule inhibitor screens and forms the basis for detailed biochemical and structural characterization.

  1. Catalytic activity of bimetallic catalysts highly sensitive to the atomic composition and phase structure at the nanoscale.

    Science.gov (United States)

    Shan, Shiyao; Petkov, Valeri; Prasai, Binay; Wu, Jinfang; Joseph, Pharrah; Skeete, Zakiya; Kim, Eunjoo; Mott, Derrick; Malis, Oana; Luo, Jin; Zhong, Chuan-Jian

    2015-12-07

    The ability to determine the atomic arrangement in nanoalloy catalysts and reveal the detailed structural features responsible for the catalytically active sites is essential for understanding the correlation between the atomic structure and catalytic properties, enabling the preparation of efficient nanoalloy catalysts by design. Herein we describe a study of CO oxidation over PdCu nanoalloy catalysts focusing on gaining insights into the correlation between the atomic structures and catalytic activity of nanoalloys. PdCu nanoalloys of different bimetallic compositions are synthesized as a model system and are activated by a controlled thermochemical treatment for assessing their catalytic activity. The results show that the catalytic synergy of Pd and Cu species evolves with both the bimetallic nanoalloy composition and temperature of the thermochemical treatment reaching a maximum at a Pd : Cu ratio close to 50 : 50. The nanoalloys are characterized structurally by ex situ and in situ synchrotron X-ray diffraction, including atomic pair distribution function analysis. The structural data show that, depending on the bimetallic composition and treatment temperature, PdCu nanoalloys adopt two different structure types. One features a chemically ordered, body centered cubic (B2) type alloy consisting of two interpenetrating simple cubic lattices, each occupied with Pd or Cu species alone, and the other structure type features a chemically disordered, face-centered cubic (fcc) type of alloy wherein Pd and Cu species are intermixed at random. The catalytic activity for CO oxidation is strongly influenced by the structural features. In particular, it is revealed that the prevalence of chemical disorder in nanoalloys with a Pd : Cu ratio close to 50 : 50 makes them superior catalysts for CO oxidation in comparison with the same nanoalloys of other bimetallic compositions. However, the catalytic synergy can be diminished if the Pd50Cu50 nanoalloys undergo

  2. Ru(0) and Ru(II) nitrosyl pincer complexes: structure, reactivity, and catalytic activity.

    Science.gov (United States)

    Fogler, Eran; Iron, Mark A; Zhang, Jing; Ben-David, Yehoshoa; Diskin-Posner, Yael; Leitus, Gregory; Shimon, Linda J W; Milstein, David

    2013-10-07

    Despite considerable interest in ruthenium carbonyl pincer complexes and their substantial catalytic activity, there has been relatively little study of the isoelectronic ruthenium nitrosyl complexes. Here we describe the synthesis and reactivity of several complexes of this type as well as the catalytic activity of complex 6. Reaction of the PNP ligand (PNP = 2,6-bis((t)Bu2PCH2)pyridine) with RuCl3(NO)(PPh3)2 yielded the Ru(II) complex 3. Chloride displacement by BAr(F-) (BAr(F-) = tetrakis(3,5-bis(trifluoromethyl)phenyl)borate) gave the crystallographicaly characterized, linear NO Ru(II) complex 4, which upon treatment with NaBEt3H yielded the Ru(0) complexes 5. The crystallographically characterized Ru(0) square planar complex 5·BF4 bears a linear NO ligand located trans to the pyridilic nitrogen. Further treatment of 5·BF4 with excess LiOH gave the crystallographicaly characterized Ru(0) square planar, linear NO complex 6. Complex 6 catalyzes the dehydrogenative coupling of alcohols to esters, reaching full conversion under air or under argon. Reaction of the PNN ligand (PNN = 2-((t)Bu2PCH2)-6-(Et2NCH2)pyridine) with RuCl3(NO)(H2O)2 in ethanol gave an equilibrium mixture of isomers 7a and 7b. Further treatment of 7a + 7b with 2 equivalent of sodium isopropoxide gave the crystallographicaly characterized, bent-nitrosyl, square pyramidal Ru(II) complex 8. Complex 8 was also synthesized by reaction of PNN with RuCl3(NO)(H2O)2 and Et3N in ethanol. Reaction of the "long arm" PN(2)N ligand (PN(2)N = 2-((t)Bu2PCH2-)-6-(Et2NCH2CH2)pyridine) with RuCl3(NO)(H2O)2 in ethanol gave complex 9, which upon treatment with 2 equiv of sodium isopropoxide gave complex 10. Complex 10 was also synthesized directly by reaction of PN(2)N with RuCl3(NO)(H2O)2 and a base in ethanol. A noteworthy aspect of these nitrosyl complexes is their preference for the Ru(0) oxidization state over Ru(II). This preference is observed with both aromatized and dearomatized pincer ligands, in

  3. Surface Acidity as Descriptor of Catalytic Activity for Oxygen Evolution Reaction in Li-O2 Battery.

    Science.gov (United States)

    Zhu, Jinzhen; Wang, Fan; Wang, Beizhou; Wang, Youwei; Liu, Jianjun; Zhang, Wenqing; Wen, Zhaoyin

    2015-10-28

    Unraveling the descriptor of catalytic activity, which is related to physical properties of catalysts, is a major objective of catalysis research. In the present study, the first-principles calculations based on interfacial model were performed to study the oxygen evolution reaction mechanism of Li2O2 supported on active surfaces of transition-metal compounds (TMC: oxides, carbides, and nitrides). Our studies indicate that the O2 evolution and Li(+) desorption energies show linear and volcano relationships with surface acidity of catalysts, respectively. Therefore, the charging voltage and desorption energies of Li(+) and O2 over TMC could correlate with their corresponding surface acidity. It is found that certain materials with an appropriate surface acidity can achieve the high catalytic activity in reducing charging voltage and activation barrier of rate-determinant step. According to this correlation, CoO should have as active catalysis as Co3O4 in reducing charging overpotential, which is further confirmed by our comparative experimental studies. Co3O4, Mo2C, TiC, and TiN are predicted to have a relatively high catalytic activity, which is consistent with the previous experiments. The present study enables the rational design of catalysts with greater activity for charging reactions of Li-O2 battery.

  4. Genetic factors affecting gene transcription and catalytic activity of UDP-glucuronosyltransferases in human liver.

    Science.gov (United States)

    Liu, Wanqing; Ramírez, Jacqueline; Gamazon, Eric R; Mirkov, Snezana; Chen, Peixian; Wu, Kehua; Sun, Chang; Cox, Nancy J; Cook, Edwin; Das, Soma; Ratain, Mark J

    2014-10-15

    The aim of this study was to discover cis- and trans-acting factors significantly affecting mRNA expression and catalytic activity of human hepatic UDP-glucuronosyltransferases (UGTs). Transcription levels of five major hepatic UGT1A (UGT1A1, UGT1A3, UGT1A4, UGT1A6 and UGT1A9) and five UGT2B (UGT2B4, UGT2B7, UGT2B10, UGT2B15 and UGT2B17) genes were quantified in human liver tissue samples (n = 125) using real-time PCR. Glucuronidation activities of 14 substrates were measured in 47 livers. We genotyped 167 tagSNPs (single-nucleotide polymorphisms) in UGT1A (n = 43) and UGT2B (n = 124), as well as the known functional UGT1A1*28 and UGT2B17 CNV (copy number variation) polymorphisms. Transcription levels of 15 transcription factors (TFs) known to regulate these UGTs were quantified. We found that UGT expression and activity were highly variable among the livers (median and range of coefficient of variations: 135%, 74-217% and 52%, 39-105%, respectively). CAR, PXR and ESR1 were found to be the most important trans-regulators of UGT transcription (median and range of correlation coefficients: 46%, 6-58%; 47%, 9-58%; and 52%, 24-75%, respectively). Hepatic UGT activities were mainly determined by UGT gene transcription levels. Twenty-one polymorphisms were significantly (FDR-adjusted P transcription and testosterone glucuronidation rate, in addition to that attributable to the UGT2B17 CNV. Our study discovered novel pharmacogenetic markers and provided detailed insight into the genetic network regulating hepatic UGTs.

  5. Catalytically active bovine serum amine oxidase bound to fluorescent and magnetically drivable nanoparticles

    Directory of Open Access Journals (Sweden)

    Bidollari E

    2012-05-01

    Full Text Available Giulietta Sinigaglia1, Massimiliano Magro1, Giovanni Miotto1, Sara Cardillo1, Enzo Agostinelli2,3, Radek Zboril4, Eris Bidollari2,3, Fabio Vianello11Department of Biological Chemistry, University of Padua, Padua, Italy; 2Istituto Pasteur-Fondazione Cenci Bolognetti, Department of Biochemical Sciences "A. Rossi Fanelli", SAPIENZA University of Rome, Rome, Italy; 3CNR, Institute Biology and Molecular Pathology, Rome, Italy; 4Regional Centre of Advanced Technologies and Materials, Department of Physical Chemistry, Palacky University, Olomouc, Czech RepublicAbstract: Novel superparamagnetic surface-active maghemite nanoparticles (SAMNs characterized by a diameter of 10 ± 2 nm were modified with bovine serum amine oxidase, which used rhodamine B isothiocyanate (RITC adduct as a fluorescent spacer-arm. A fluorescent and magnetically drivable adduct comprised of bovine serum copper-containing amine oxidase (SAMN–RITC–BSAO that immobilized on the surface of specifically functionalized magnetic nanoparticles was developed. The multifunctional nanomaterial was characterized using transmission electron microscopy, infrared spectroscopy, mass spectrometry, and activity measurements. The results of this study demonstrated that bare magnetic nanoparticles form stable colloidal suspensions in aqueous solutions. The maximum binding capacity of bovine serum amine oxidase was approximately 6.4 mg g-1 nanoparticles. The immobilization procedure reduced the catalytic activity of the native enzyme to 30% ± 10% and the Michaelis constant was increased by a factor of 2. We suggest that the SAMN–RITC–BSAO complex, characterized by a specific activity of 0.81 IU g-1, could be used in the presence of polyamines to create a fluorescent magnetically drivable H2O2 and aldehydes-producing system. Selective tumor cell destruction is suggested as a potential future application of this system.Keywords: amine oxidase, hydrogen peroxide production, superparamagnetic

  6. IFCC primary reference procedures for the measurement of catalytic activity concentrations of enzymes at 37 degrees C. International Federation of Clinical Chemistry and Laboratory Medicine. Part 4. Reference procedure for the measurement of catalytic concentration of alanine aminotransferase.

    Science.gov (United States)

    Schumann, Gerhard; Bonora, Roberto; Ceriotti, Ferruccio; Férard, Georges; Ferrero, Carlo A; Franck, Paul F H; Gella, F Javier; Hoelzel, Wieland; Jørgensen, Poul Jørgen; Kanno, Takashi; Kessner, Art; Klauke, Rainer; Kristiansen, Nina; Lessinger, Jean-Marc; Linsinger, Thomas P J; Misaki, Hideo; Panteghini, Mauro; Pauwels, Jean; Schiele, Françoise; Schimmel, Heinz G; Weidemann, Gerhard; Siekmann, Lothar

    2002-07-01

    This paper is the fourth in a series dealing with reference procedures for the measurement of catalytic activity concentrations of enzymes at 37 degrees C and the certification of reference preparations. Other parts deal with: Part 1. The Concept of Reference Procedures for the Measurement of Catalytic Activity Concentrations of Enzymes; Part 2. Reference Procedure for the Measurement of Catalytic Concentration of Creatine Kinase; Part 3. Reference Procedure for the Measurement of Catalytic Concentration of Lactate Dehydrogenase; Part 5. Reference Procedure for the Measurement of Catalytic Concentration of Aspartate Aminotransferase; Part 6. Reference Procedure for the Measurement of Catalytic Concentration of Gamma-Glutamyltransferase; Part 7. Certification of Four Reference Materials for the Determination of Enzymatic Activity of Gamma-Glutamyltransferase, Lactate Dehydrogenase, Alanine Aminotransferase and Creatine Kinase at 37 degrees C. A document describing the determination of preliminary upper reference limits is also in preparation. The procedure described here is deduced from the previously described 30 degrees C IFCC reference method. Differences are tabulated and commented on in Appendix 2.

  7. IFCC primary reference procedures for the measurement of catalytic activity concentrations of enzymes at 37 degrees C. International Federation of Clinical Chemistry and Laboratory Medicine. Part 6. Reference procedure for the measurement of catalytic concentration of gamma-glutamyltransferase.

    Science.gov (United States)

    Schumann, Gerhard; Bonora, Roberto; Ceriotti, Ferruccio; Férard, Georges; Ferrero, Carlo A; Franck, Paul F H; Gella, F Javier; Hoelzel, Wieland; Jørgensen, Poul Jørgen; Kanno, Takashi; Kessner, Art; Klauke, Rainer; Kristiansen, Nina; Lessinger, Jean-Marc; Linsinger, Thomas P J; Misaki, Hideo; Panteghini, Mauro; Pauwels, Jean; Schiele, Françoise; Schimmel, Heinz G; Weidemann, Gerhard; Siekmann, Lothar

    2002-07-01

    This paper is the sixth in a series dealing with reference procedures for the measurement of catalytic activity concentrations of enzymes at 37 degrees C and the certification of reference preparations. Other parts deal with: Part 1. The Concept of Reference Procedures for the Measurement of Catalytic Activity Concentrations of Enzymes; Part 2. Reference Procedure for the Measurement of Catalytic Concentration of Creatine Kinase; Part 3. Reference Procedure for the Measurement of Catalytic Concentration of Lactate Dehydrogenase; Part 4. Reference Procedure for the Measurement of Catalytic Concentration of Alanine Aminotransferase; Part 5. Reference Procedure for the Measurement of Catalytic Concentration of Aspartate Aminotransferase; Part 7. Certification of Four Reference Materials for the Determination of Enzymatic Activity of Gamma-Glutamyltransferase, Lactate Dehydrogenase, Alanine Aminotransferase and Creatine Kinase at 37 degrees C A document describing the determination of preliminary upper reference limits is also in preparation. The procedure described here is deduced from the previously described 30 degrees C IFCC reference method. Differences are tabulated and commented on in Appendix 1.

  8. Molecular Basis of Reduced Pyridoxine 5′-Phosphate Oxidase Catalytic Activity in Neonatal Epileptic Encephalopathy Disorder*

    OpenAIRE

    2009-01-01

    Mutations in pyridoxine 5′-phosphate oxidase are known to cause neonatal epileptic encephalopathy. This disorder has no cure or effective treatment and is often fatal. Pyridoxine 5′-phosphate oxidase catalyzes the oxidation of pyridoxine 5′-phosphate to pyridoxal 5′-phosphate, the active cofactor form of vitamin B6 required by more than 140 different catalytic activities, including enzymes involved in amino acid metabolism and biosynthesis of neurotransmitters. Our aim is to elucidate the mec...

  9. Mesoporous Silica Supported Pd-MnOx Catalysts with Excellent Catalytic Activity in Room-Temperature Formic Acid Decomposition

    Science.gov (United States)

    Jin, Min-Ho; Oh, Duckkyu; Park, Ju-Hyoung; Lee, Chun-Boo; Lee, Sung-Wook; Park, Jong-Soo; Lee, Kwan-Young; Lee, Dong-Wook

    2016-01-01

    For the application of formic acid as a liquid organic hydrogen carrier, development of efficient catalysts for dehydrogenation of formic acid is a challenging topic, and most studies have so far focused on the composition of metals and supports, the size effect of metal nanoparticles, and surface chemistry of supports. Another influential factor is highly desired to overcome the current limitation of heterogeneous catalysis for formic acid decomposition. Here, we first investigated the effect of support pore structure on formic acid decomposition performance at room temperature by using mesoporous silica materials with different pore structures such as KIE-6, MCM-41, and SBA-15, and achieved the excellent catalytic activity (TOF: 593 h−1) by only controlling the pore structure of mesoporous silica supports. In addition, we demonstrated that 3D interconnected pore structure of mesoporous silica supports is more favorable to the mass transfer than 2D cylindrical mesopore structure, and the better mass transfer provides higher catalytic activity in formic acid decomposition. If the pore morphology of catalytic supports such as 3D wormhole or 2D cylinder is identical, large pore size combined with high pore volume is a crucial factor to achieve high catalytic performance. PMID:27666280

  10. Synthesis of Rh/Macro-Porous Alumina Over Micro-Channel Plate and Its Catalytic Activity Tests for Diesel Reforming.

    Science.gov (United States)

    Seong, Yeon Baek; Kim, Yong Sul; Park, No-Kuk; Lee, Tae Jin

    2015-11-01

    Macro-porous Al2O3 as the catalytic support material was synthesized using colloidal polystyrene spheres over a micro-channel plate. The colloidal polystyrene spheres were used as a template for the production of an ordered macro porous material using an alumina nitrate solution as the precursor for Al2O3. The close-packed colloidal crystal array template method was applied to the formulation of ordered macro-porous Al2O3 used as a catalytic support material over a micro-channel plate. The solvent in the mixture solution, which also contained the colloidal polystyrene solution, aluminum nitrate solution and the precursor of the catalytic active materials (Rh), was evaporated in a vacuum oven at 50 degrees C. The ordered polystyrene spheres and aluminum salt of the solid state were deposited over a micro channel plate, and macro-porous Al2O3 was formed after calcination at 600 degrees C to remove the polystyrene spheres. The catalytic activity of the Rh/macro-porous alumina supported over the micro-channel plate was tested for diesel reforming.

  11. Mesoporous Silica Supported Pd-MnOx Catalysts with Excellent Catalytic Activity in Room-Temperature Formic Acid Decomposition

    Science.gov (United States)

    Jin, Min-Ho; Oh, Duckkyu; Park, Ju-Hyoung; Lee, Chun-Boo; Lee, Sung-Wook; Park, Jong-Soo; Lee, Kwan-Young; Lee, Dong-Wook

    2016-09-01

    For the application of formic acid as a liquid organic hydrogen carrier, development of efficient catalysts for dehydrogenation of formic acid is a challenging topic, and most studies have so far focused on the composition of metals and supports, the size effect of metal nanoparticles, and surface chemistry of supports. Another influential factor is highly desired to overcome the current limitation of heterogeneous catalysis for formic acid decomposition. Here, we first investigated the effect of support pore structure on formic acid decomposition performance at room temperature by using mesoporous silica materials with different pore structures such as KIE-6, MCM-41, and SBA-15, and achieved the excellent catalytic activity (TOF: 593 h-1) by only controlling the pore structure of mesoporous silica supports. In addition, we demonstrated that 3D interconnected pore structure of mesoporous silica supports is more favorable to the mass transfer than 2D cylindrical mesopore structure, and the better mass transfer provides higher catalytic activity in formic acid decomposition. If the pore morphology of catalytic supports such as 3D wormhole or 2D cylinder is identical, large pore size combined with high pore volume is a crucial factor to achieve high catalytic performance.

  12. Heterogeneous catalytic ozonation of dibutyl phthalate in aqueous solution in the presence of iron-loaded activated carbon.

    Science.gov (United States)

    Huang, Yuanxing; Cui, Chenchen; Zhang, Daofang; Li, Liang; Pan, Ding

    2015-01-01

    Iron-loaded activated carbon was prepared and used as catalyst in heterogeneous catalytic ozonation of dibutyl phthalate (DBP). The catalytic activity of iron-loaded activated carbon was investigated under various conditions and the mechanisms of DBP removal were deduced. Characterization of catalyst indicated that the iron loaded on activated carbon was mainly in the form of goethite, which reduced its surface area, pore volume and pore diameter. The presence of metals on activated carbon positively contributed to its catalytic activity in ozonation of DBP. Iron loading content of 15% and initial water pH of 8 achieved highest DBP removal among all the tried conditions. Catalyst dosage of 10 mg L(-1) led to approximately 25% of increase in DBP (initial concentration 2 mg L(-1)) removal in 60 min as compared with ozone alone, and when catalyst dosage increased to 100 mg L(-1), the DBP removal was further improved by 46%. Based on a comparison of reaction rates for direct and indirect transformation of DBP, the increased removal of DBP in this study likely occurred via transformation of ozone into hydroxyl radicals on the catalyst surface.

  13. Generating CuII-Oxyl/CuIII-Oxo Species from CuI- α-Ketocarboxylate Complexes and O2: In silico studies on ligand effects and C-H-activation reactivity

    OpenAIRE

    Huber, Stefan M.; Ertem, Mehmed Z.; Aquilante, Francesco; Gagliardi, Laura; Tolman, William B.; Cramer, Christopher J.

    2009-01-01

    The mechanistic details associated with the generation and reaction of [CuO]+ species from CuI-[alpha]-ketocarboxylate complexes, especially with respect to modifications of the ligand supporting the copper center, were investigated (see scheme). Theoretical models were used to characterize the electronic structures of different [CuO]+ species and their reactivity in C—H activation and O-atom transfer reactions.A mechanism for the oxygenation of CuI complexes with -ketocarboxylate ligands tha...

  14. Catalytic Activation of Small Molecules. Development and Characterisation of Ruthenium Complexes for Application in Catalysis

    OpenAIRE

    Choi, Jong-Hoo

    2016-01-01

    In this work, the synthesis, characterisation and catalytic application of ruthenium pincer complexes is presented. In this context, new synthetic strategies are discussed to obtain novel ruthenium pincer dihydrogen complexes. Furthermore, the reactivity of the complexes towards small molecules (e.g. alcohols, boranes, ammonia, amines, nitriles and hydrogen) was observed, delivering fundamental insights into catalytic applications. With the reactivity testing, new borylated B-H-σ-complexes we...

  15. Biosynthesis of gold nanoparticles using Capsicum annuum var. grossum pulp extract and its catalytic activity

    Science.gov (United States)

    Yuan, Chun-Gang; Huo, Can; Yu, Shuixin; Gui, Bing

    2017-01-01

    Biological synthesis approach has been regarded as a green, eco-friendly and cost effective method for nanoparticles preparation without any toxic solvents and hazardous bi-products during the process. This present study reported a facile and rapid biosynthesis method for gold nanoparticles (GNPs) from Capsicum annuum var. grossum pulp extract in a single-pot process. The aqueous pulp extract was used as biotic reducing agent for gold nanoparticle growing. Various shapes (triangle, hexagonal, and quasi-spherical shapes) were observed within range of 6-37 nm. The UV-Vis spectra showed surface plasmon resonance (SPR) peak for the formed GNPs at 560 nm after 10 min incubation at room temperature. The possible influences of extract amount, gold ion concentration, incubation time, reaction temperature and solution pH were evaluated to obtain the optimized synthesis conditions. The effects of the experimental factors on NPs synthesis process were also discussed. The produced gold nanoparticles were characterized by transform electron microscopy (TEM), X-ray diffraction (XRD), energy dispersive X-ray (EDS) and Fourier Transform infrared spectroscopy (FTIR). The results demonstrated that the as-obtained GNPs were well dispersed and stable with good catalytic activity. Biomolecules in the aqueous extract were responsible for the capping and stabilization of GNPs.

  16. Characterization of systems active in selective catalytic reduction of NO{sub x}

    Energy Technology Data Exchange (ETDEWEB)

    Biglino, Daniele

    1998-06-01

    This thesis is in the field of gas emission control from automobile and stationary sources. Out of the possible approaches to the elimination of pollutant gases, such as nitrogen oxides (NO{sub x}), one consists in the selective catalytic reduction (SCR) of these NO{sub x} on a suitable heterogeneous catalyst. Ammonia or hydrocarbons are employed as reducing agents. The most important catalysts active in the SCR of NO{sub x} are based on ions of transition metal either supported on several oxides or dispersed in zeolites. The catalysts have been characterized by electron magnetic resonance techniques (EPR, ENDOR, ESEEM) and the interaction of catalysts with nitrogen oxides, with reducing and poisoned agents have been followed with the same techniques. Copper dispersed on alumina and its interaction with both NO and ammonia has been investigated. Also the interaction between both water and ammonia with copper dispersed in zeolite ZSM-5 has been investigated. The diffusion of NO{sub 2} in zeolites has been monitored 4 refs, 5 figs

  17. CATALYTIC AND ELECTROCATALYTIC ACTIVITY OF Pt-Ru/C ELECTRODE FOR HYDROGEN OXIDATION IN ALKALINE

    Directory of Open Access Journals (Sweden)

    D. LABOU

    2008-07-01

    Full Text Available The kinetics of the oxidation of H2 on PtRu/C gas-diffusion electrode was studied by interfacing the electrode with aqueous electrolytes at different pH values. The conducting electrolytes were KOH and HClO4 aqueous solutions with different concentrations. It is shown that the nature of the aqueous electrolyte plays the role of an active catalyst support for the PtRu/C electrode which drastically affects its catalytic properties. During the aforementioned interaction, termed electrochemical metal support interaction (EMSI, the electrochemical potential of the electrons at the catalyst Fermi level is equalised with the electrochemical potential of the solvated electron in the aqueous electrolyte. The electrochemical experiments carried out at various pH values showed that the electrochemical promotion catalysis (EPOC is more intense when the catalyst-electrode is interfaced with electrolytes with high pH values where the OH– ionic conduction prevails. It was concluded that similar to the solid state electrochemical systems EPOC proceeds through the formation of a polar adsorbed promoting layer of , electrochemically supplied by the OH- species, at the three phase boundaries of the gas exposed gas diffusion catalyst-electrode surface.

  18. Annealed Crystallization and Catalytic activity of Ultrafine NiB Amorphous Alloy

    Institute of Scientific and Technical Information of China (English)

    WEIShiqing; HUTiandou; 等

    2001-01-01

    A Ultrafine amorphous NiB alloy was prepared via chemical reduction method;Its structures during the crystallizatioin precess was characterized by such techniques as Differential thermal analysis (DTA),X-ray absorption fine structure (XAFS) and X-ray diffraction(XRD),and correlated to the catalytic properties for benzene hydrogenation.It was found that the crystallization of amorphous NiB alloy was carried out in two steps,as indicated by two exothermic peaks centered at 598 and 652K respectively.During the first step.two metastable crystalline phases,i.e.,Ni3B and a noaocrstalline Ni phase(Ni-rich NiB alloy),were formed.Further annealing at higher temperature of 652 K may result in the decomposition of crystalline Ni3B and aggregation of nanocrystalline Ni,the benzene hydrogenation is optimized around the annealing temperature of 623K.It most probably results from the maximum amount of active site on nanocrystalline Ni formed by thermal treatment at appropriate annealing temperature.

  19. Facile synthesis of porous Pd nanoflowers with excellent catalytic activity towards CO oxidation☆

    Institute of Scientific and Technical Information of China (English)

    Tareque Odoom-Wubah; Mingming Du; Williams Brown Osei; Daohua Sun; Jiale Huang; Qingbiao Li

    2015-01-01

    Microorganism-mediated, hexadecyltrimethylammonium chloride (CTAC)-directed (MCD) method was employed in this work to synthesize Pd nanoflowers (PdNFs). Proper Pichia pastoris cel s (PPCs) dosage, ascorbic acid (AA), Pd(NO3)2 and CTAC concentrations were essential for the growth of the PdNFs. The size of the as-synthesized PdNFs could be tuned by adjusting the amount of Pd(NO3)2 solution and dosage of PPCs used. Char-acterization techniques such as X-ray diffraction, transmission electron microscopy, and X-ray photoelectron spectroscopy were used to verify the nature of the PdNFs. Finally the PdNF/PPC nanocomposites were immobilized onto TiO2 supports to obtain bio-PdNF/TiO2 catalysts which showed excellent catalytic activity for CO oxidation, obtaining 100%conversion at 100 °C and remaining stable over a period of 52 h of reaction time.

  20. Computational kinetic modeling of the selenol catalytic activity as the glutathione peroxidase nanomimic.

    Science.gov (United States)

    Kheirabadi, Ramesh; Izadyar, Mohammad; Housiandokht, Mohammad Reza

    2016-11-21

    Density functional theory and solvent-assisted proton exchange methods have been applied for computational modeling of the catalytic cycle of selenol zwitterion anion from the kinetic and thermodynamic viewpoints. Selenol zwitterion anion has been represented as an effective glutathione peroxidase nanomimic. It reduces peroxides through a three-step pathway. In the first step, seleninic acid is produced through deprotonating of the selenol zwitterion anion in the presence of the hydrogen peroxide. Seleninic acid reacts with a thiol to form selenylsulfide in the second step. In the last step, selenylsulfide is reduced by the second thiol and regenerates selenolate anion through disulfide formation. Selenol zwitterion anion in comparison to more widely studied compounds such as ebselen has a good activity to react with hydrogen peroxide and producing seleninic acid. The energy barrier of this reaction is 11.7kcalmol(-1) which is smaller than the reported enzyme mimics. Moreover, the reactions of seleninic acid and selenylsulfide with methanethiol, which is used as a nucleophile, are exothermic by -18.4 or -57.0kcalmol(-1), respectively. Based on the global electron density transfer value of -0.507 e from the natural atomic charge analysis, an electronic charge depletion at the transition state (TS), electron-donor substitutions on the selenolate facilitates the reduction reaction, effectively. Finally, the nature of the bond formation/cleavage at the TS has been quantitatively described by using the topological analyses. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. Plasma Enhanced Chemical Vapor Deposition Nanocrystalline Tungsten Carbide Thin Film and Its Electro-catalytic Activity

    Institute of Scientific and Technical Information of China (English)

    Huajun ZHENG; Chunan MA; Jianguo HUANG; Guohua LI

    2005-01-01

    Nanocrystalline tungsten carbide thin films were fabricated on graphite substrates by plasma enhanced chemical vapor deposition (PECVD) at H2 and Ar atmosphere, using WF6 and CH4 as precursors. The crystal phase, structure and chemical components of the films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy-dispersive spectrometer (EDS), respectively. The results show that the film prepared at CH4/WF6concentration ratio of 20 and at 800℃ is composed of spherical particles with a diameter of 20~35 nm. Electrochemical investigations show that the electrochemical real surface area of electrode of the film is large, and the electrode of the film exhibits higher electro-catalytic activity in the reaction of methanol oxidation. The designated constant current of the film catalyst is 123.6 mA/cm2 in the mixture solution of H2SO4 and CH3OH at the concentration of 0.5 and 2.0 mol/L at 70℃, and the designated constant potential is only 0.306 V (vs SCE).

  2. One pot synthesis of copper nanoparticles at room temperature and its catalytic activity

    Directory of Open Access Journals (Sweden)

    Nikhil V. Suramwar

    2016-11-01

    Full Text Available A facile reduction approach with sodium borohydride as a reducing agent and starch as a stabilizing agent leads to monodispersed Cu nanoparticles in aqueous medium at an ambient condition. The synthesized nanoparticles are highly pure with no traces of CuO found on surface. They are uniform in size in the range of 40–80 nm. The Cu nanoparticles have a FCC structure as characterized by powder X-ray diffraction (XRD. Transmission electron microscopy (TEM images show that they are arranged in a regular array which is separated by starch thin layer which controls the growth as well as stabilizes the Cu nanoparticles from air oxidation. The catalytic activity of prepared Cu nanomaterial was tested in Ullman reaction for the synthesis of biphenyl from iodobenzene. We have shown in this paper that the size as well as exposed surface area of the copper nanoparticles is responsible for the increase in yield of biphenyl up to 92%. This is higher compare to the 40% yield with the normal size copper powder under the same reaction condition.

  3. A supramolecular ruthenium macrocycle with high catalytic activity for water oxidation that mechanistically mimics photosystem II

    Science.gov (United States)

    Schulze, Marcus; Kunz, Valentin; Frischmann, Peter D.; Würthner, Frank

    2016-06-01

    Mimicking the ingenuity of nature and exploiting the billions of years over which natural selection has developed numerous effective biochemical conversions is one of the most successful strategies in a chemist's toolbox. However, an inability to replicate the elegance and efficiency of the oxygen-evolving complex of photosystem II (OEC-PSII) in its oxidation of water into O2 is a significant bottleneck in the development of a closed-loop sustainable energy cycle. Here, we present an artificial metallosupramolecular macrocycle that gathers three Ru(bda) centres (bda = 2,2‧-bipyridine-6,6‧-dicarboxylic acid) that catalyses water oxidation. The macrocyclic architecture accelerates the rate of water oxidation via a water nucleophilic attack mechanism, similar to the mechanism exhibited by OEC-PSII, and reaches remarkable catalytic turnover frequencies >100 s-1. Photo-driven water oxidation yields outstanding activity, even in the nM concentration regime, with a turnover number of >1,255 and turnover frequency of >13.1 s-1.

  4. Effects of a TiC substrate on the catalytic activity of Pt for NO reduction.

    Science.gov (United States)

    Chu, Xingli; Fu, Zhaoming; Li, Shasha; Zhang, Xilin; Yang, Zongxian

    2016-05-11

    Density functional theory calculations are used to elucidate the catalytic properties of a Pt monolayer supported on a TiC(001) substrate (Pt/TiC) toward NO reduction. It is found that the compound system of Pt/TiC has a good stability due to the strong Pt-TiC interaction. The diverse dissociation paths (namely the direct dissociation mechanism and the dimeric mechanism) are investigated. The transition state searching calculations suggest that NO has strong diffusion ability and small activation energy for dissociation on the Pt/TiC. For NO reduction on the Pt/TiC surface, we have found that the direct dissociation mechanisms (NO + N + O → NO2 + N and NO + N + O → N2 + O + O) are easier with a smaller dissociation barrier than those on the Pt(111) surface; and the dimeric process (NO + NO → (NO)2 → N2O + O → N2 + O + O) is considered to be dominant or significant with even a lower energy barrier than that of the direct dissociation. The results show that Pt/TiC can serve as an efficient catalyst for NO reduction.

  5. Maternal High Fat Diet Alters Skeletal Muscle Mitochondrial Catalytic Activity in Adult Male Rat Offspring

    Science.gov (United States)

    Pileggi, Chantal A.; Hedges, Christopher P.; Segovia, Stephanie A.; Markworth, James F.; Durainayagam, Brenan R.; Gray, Clint; Zhang, Xiaoyuan D.; Barnett, Matthew P. G.; Vickers, Mark H.; Hickey, Anthony J. R.; Reynolds, Clare M.; Cameron-Smith, David

    2016-01-01

    A maternal high-fat (HF) diet during pregnancy can lead to metabolic compromise, such as insulin resistance in adult offspring. Skeletal muscle mitochondrial dysfunction is one mechanism contributing to metabolic impairments in insulin resistant states. Therefore, the present study aimed to investigate whether mitochondrial dysfunction is evident in metabolically compromised offspring born to HF-fed dams. Sprague-Dawley dams were randomly assigned to receive a purified control diet (CD; 10% kcal from fat) or a high fat diet (HFD; 45% kcal from fat) for 10 days prior to mating, throughout pregnancy and during lactation. From weaning, all male offspring received a standard chow diet and soleus muscle was collected at day 150. Expression of the mitochondrial transcription factors nuclear respiratory factor-1 (NRF1) and mitochondrial transcription factor A (mtTFA) were downregulated in HF offspring. Furthermore, genes encoding the mitochondrial electron transport system (ETS) respiratory complex subunits were suppressed in HF offspring. Moreover, protein expression of the complex I subunit, NDUFB8, was downregulated in HF offspring (36%), which was paralleled by decreased maximal catalytic linked activity of complex I and III (40%). Together, these results indicate that exposure to a maternal HF diet during development may elicit lifelong mitochondrial alterations in offspring skeletal muscle. PMID:27917127

  6. Band gap calculation and photo catalytic activity of rare earths doped rutile TiO2

    Institute of Scientific and Technical Information of China (English)

    BIAN Liang; SONG Mianxin; ZHOU Tianliang; ZHAO Xiaoyong; DAI Qingqing

    2009-01-01

    The density of states (DOS) of 17 kinds of rare earths (RE) doped futile TiO2 was by using fast-principles density functional the-ory (DFF) calculation. The band gap widths of RE doped rutile TiO2 were important factors for altering their absorbing wavelengths. The results show that RE ions could obviously reduce the band gap widths and form of energy of rutile TiO2 except Lu, Y, Yb and Sc, and the order of absorbing wavelengths of RE doped rutile TiO2 were the same as that of the results of calculation. The ratio of RE dopant was an-other important factor for the photo catalytic activity of RE doped rutile TiO2, and there was an optimal ratio of dopant. There was a constant for predigesting the calculation difficulty, respectively, which were 0.5mol.% and 100 mol-1 under supposition. The band gap widths of RE doped rutile TiO2 by DFT calculation were much larger than that by experiment. Finally, by transferring the calculation values to experiment values, it could be found and predicted that RE enlarged obviously the absorbing wavelengh of futile TiO2. In addition, the degree of RE ions edging out the Ti atom using the parameters of RE elements was computed.

  7. Heterogeneous Au-Pt nanostructures with enhanced catalytic activity toward oxygen reduction.

    Science.gov (United States)

    Ye, Feng; Liu, Hui; Hu, Weiwei; Zhong, Junyu; Chen, Yingying; Cao, Hongbin; Yang, Jun

    2012-03-14

    Heterogeneous Au-Pt nanostructures have been synthesized using a sacrificial template-based approach. Typically, monodispersed Au nanoparticles are prepared first, followed by Ag coating to form core-shell Au-Ag nanoparticles. Next, the galvanic replacement reaction between Ag shells and an aqueous H(2)PtCl(6) solution, whose chemical reaction can be described as 4Ag + PtCl(6)(2-)→ Pt + 4AgCl + 2Cl(-), is carried out at room temperature. Pure Ag shell is transformed into a shell made of Ag/Pt alloy by galvanic replacement. The AgCl formed simultaneously roughens the surface of alloy Ag-Pt shells, which can be manipulated to create a porous Pt surface for oxygen reduction reaction. Finally, Ag and AgCl are removed from core-shell Au-Ag/Pt nanoparticles using bis(p-sulfonatophenyl)phenylphosphane dihydrate dipotassium salt to produce heterogeneous Au-Pt nanostructures. The heterogeneous Au-Pt nanostructures have displayed superior catalytic activity towards oxygen reduction in direct methanol fuel cells because of the electronic coupling effect between the inner-placed Au core and the Pt shell.

  8. Role of the NC-loop in catalytic activity and stability in lipase from Fervidobacterium changbaicum.

    Directory of Open Access Journals (Sweden)

    Binchun Li

    Full Text Available Flexible NC-loops between the catalytic domain and the cap domain of the α/β hydrolase fold enzymes show remarkable diversity in length, sequence, and configuration. Recent investigations have suggested that the NC-loop might be involved in catalysis and substrate recognition in many enzymes from the α/β hydrolase fold superfamily. To foster a deep understanding of its role in catalysis, stability, and divergent evolution, we here systemically investigated the function of the NC-loop (residues 131-151 in a lipase (FClip1 from thermophilic bacterium Fervidobacterium changbaicum by loop deletion, alanine-scanning mutagenesis and site-directed mutagenesis. We found that the upper part of the NC-loop (residues 131-138 was of great importance to enzyme catalysis. Single substitutions in this region could fine-tune the activity of FClip1 as much as 41-fold, and any deletions from this region rendered the enzyme completely inactive. The lower part of the NC-loop (residues 139-151 was capable of enduring extensive deletions without loss of activity. The shortened mutants in this region were found to show both improved activity and increased stability simultaneously. We therefore speculated that the NC-loop, especially the lower part, would be a perfect target for enzyme engineering to optimize the enzymatic properties, and might present a hot zone for the divergent evolution of α/β hydrolases. Our findings may provide an opportunity for better understanding of the mechanism of divergent evolution in the α/β hydrolase fold superfamily, and may also guide the design of novel biocatalysts for industrial applications.

  9. Facile preparation of SERS and catalytically active Au nanostructures using furfuryl derivatives

    Science.gov (United States)

    Kim, Ki-Jung; Kim, Hyun-Chul; Park, Minsun; Huh, Seong

    2017-08-01

    Six different types of Au nanostructures with rough surfaces were readily prepared through the redox reactions between Au precursor, AuCl4-, and furfuryl derivatives without extra metal surface capping ligands, in deionized water at room temperature. Furfuryl alcohol (FA) or furfurylamine (FFA) was used as a sole reducing agent for the reduction of Au precursor. Both FA and FFA effectively polymerized during the redox reactions to form polyfuran polymers. These polymers are thought to act as surface capping ligands during the formation of Au nanostructures. Experiments were conducted with three different concentrations of each furfuryl derivative. Interestingly, Au particles prepared from the reaction with varying concentration of FA or FFA showed large differences in size, and revealed that the higher the ratios of [FA]/[AuCl4-] or [FFA]/[AuCl4-], the smaller the size of Au particles. The size of Au particles was in the range of 1 μm to under 30 nm. Among these samples, two nanostructured Au particles, AuFA-4 and AuFFA-1, deposited on a Si wafer by a simple drop-casting method, were revealed as highly active surface-enhanced Raman scattering (SERS) substrates for the detection of methylene blue (MB) and crystal violet (CV). High SERS enhancement factors (EFs) of 106 ∼ 108 for MB and CV were observed. Small size Au nanoparticles (AuFFA-2 and AuFFA-4) were also found to be very active for the catalytic hydrogenation of 4-nitrophenol to 4-aminophenol in the presence of NaBH4 at room temperature. AuFFA-2 could be recycled eight times, without losing its activity.

  10. Promotion of catalytic activity for methanol electro-oxidation on CoPc-Pt/C co-catalysts

    Institute of Scientific and Technical Information of China (English)

    WU JingJie; XU YiMin; PAN Mu; MA WenTao; TANG HaoLin

    2009-01-01

    The catalytic activity for methanol electro-oxidation on CoPc-Pt/C co-catalysts, prepared by impregnation method, was studied in details through electrochemical methods. Cyclic voltammetry (CV) result demonstrates that CoPc has higher forward anodic peak current density and jf/jb value (forward anodic peak current density/backward anodic peak current density) than Pt/C. Chronoamperometry (CA) analysis indicates that CoPc-Pt/C exhibits both excellent transient current density and stable current density for methanol electro-oxidation compared with Pt/C. Two main mechanisms related to the promotion of catalytic activity are as follows: CoPc-Pt/C has the activity of tolerance to carbonaceous intermediates, thus inhibiting the self-poisoning of catalysts; CoPc-Pt/C owns prominent intrinsic catalytic activity indicated by the apparent activation energy for methanol oxidation on CoPc-Pt/C, which is 18 kJ/mol, less than that on Pt and PtRu catalysts as reported.

  11. Activating basal-plane catalytic activity of two-dimensional MoS2 monolayer with remote hydrogen plasma

    KAUST Repository

    Cheng, Chia-Chin

    2016-09-10

    Two-dimensional layered transition metal dichalcogenide (TMD) materials such as Molybdenum disufide (MoS2) have been recognized as one of the low-cost and efficient electrocatalysts for hydrogen evolution reaction (HER). The crystal edges that account for a small percentage of the surface area, rather than the basal planes, of MoS2 monolayer have been confirmed as their active catalytic sites. As a result, extensive efforts have been developing in activating the basal planes of MoS2 for enhancing their HER activity. Here, we report a simple and efficient approach-using a remote hydrogen-plasma process-to creating S-vacancies on the basal plane of monolayer crystalline MoS2; this process can generate high density of S-vacancies while mainly maintaining the morphology and structure of MoS2 monolayer. The density of S-vacancies (defects) on MoS2 monolayers resulted from the remote hydrogen-plasma process can be tuned and play a critical role in HER, as evidenced in the results of our spectroscopic and electrical measurements. The H2-plasma treated MoS2 also provides an excellent platform for systematic and fundamental study of defect-property relationships in TMDs, which provides insights for future applications including electrical, optical and magnetic devices. © 2016 Elsevier Ltd.

  12. Enantioselective amine α-functionalization via palladium-catalysed C-H arylation of thioamides

    Science.gov (United States)

    Jain, Pankaj; Verma, Pritha; Xia, Guoqin; Yu, Jin-Quan

    2017-02-01

    Saturated aza-heterocycles are highly privileged building blocks that are commonly encountered in bioactive compounds and approved therapeutic agents. These N-heterocycles are also incorporated as chiral auxiliaries and ligands in asymmetric synthesis. As such, the development of methods to functionalize the α-methylene C-H bonds of these systems enantioselectively is of great importance, especially in drug discovery. Currently, enantioselective lithiation with (-)-sparteine followed by Pd(0) catalysed cross-coupling to prepare α-arylated amines is largely limited to pyrrolidines. Here we report a Pd(II)-catalysed enantioselective α-C-H coupling of a wide range of amines, which include ethyl amines, azetidines, pyrrolidines, piperidines, azepanes, indolines and tetrahydroisoquinolines. Chiral phosphoric acids are demonstrated as effective anionic ligands for the enantioselective coupling of methylene C-H bonds with aryl boronic acids. This catalytic reaction not only affords high enantioselectivities, but also provides exclusive regioselectivity in the presence of two methylene groups in different steric environments.

  13. Identification of residues in the heme domain of soluble guanylyl cyclase that are important for basal and stimulated catalytic activity.

    Directory of Open Access Journals (Sweden)

    Padmamalini Baskaran

    Full Text Available Nitric oxide signals through activation of soluble guanylyl cyclase (sGC, a heme-containing heterodimer. NO binds to the heme domain located in the N-terminal part of the β subunit of sGC resulting in increased production of cGMP in the catalytic domain located at the C-terminal part of sGC. Little is known about the mechanism by which the NO signaling is propagated from the receptor domain (heme domain to the effector domain (catalytic domain, in particular events subsequent to the breakage of the bond between the heme iron and Histidine 105 (H105 of the β subunit. Our modeling of the heme-binding domain as well as previous homologous heme domain structures in different states point to two regions that could be critical for propagation of the NO activation signal. Structure-based mutational analysis of these regions revealed that residues T110 and R116 in the αF helix-β1 strand, and residues I41 and R40 in the αB-αC loop mediate propagation of activation between the heme domain and the catalytic domain. Biochemical analysis of these heme mutants allows refinement of the map of the residues that are critical for heme stability and propagation of the NO/YC-1 activation signal in sGC.

  14. Pt skin coated hollow Ag-Pt bimetallic nanoparticles with high catalytic activity for oxygen reduction reaction

    Science.gov (United States)

    Fu, Tao; Huang, Jianxing; Lai, Shaobo; Zhang, Size; Fang, Jun; Zhao, Jinbao

    2017-10-01

    The catalytic activity and stability of electrocatalyst is critical for the commercialization of fuel cells, and recent reports reveal the great potential of the hollow structures with Pt skin coat for developing high-powered electrocatalysts due to their highly efficient utilization of the Pt atoms. Here, we provide a novel strategy to prepare the Pt skin coated hollow Ag-Pt structure (Ag-Pt@Pt) of ∼8 nm size at room temperature. As loaded on the graphene, the Ag-Pt@Pt exhibits a remarkable mass activity of 0.864 A/mgPt (at 0.9 V, vs. reversible hydrogen electrode (RHE)) towards oxygen reduction reaction (ORR), which is 5.30 times of the commercial Pt/C catalyst, and the Ag-Pt@Pt also shows a better stability during the ORR catalytic process. The mechanism of this significant enhancement can be attributed to the higher Pt utilization and the unique Pt on Ag-Pt surface structure, which is confirmed by the density functional theory (DFT) calculations and other characterization methods. In conclusion, this original work offers a low-cost and environment-friendly method to prepare a high active electrocatalyst with cheaper price, and this work also discloses the correlation between surface structures and ORR catalytic activity for the hollow structures with Pt skin coat, which can be instructive for designing novel advanced electrocatalysts for fuel cells.

  15. Enhancement in the Catalytic Activity of Pd/USY in the Heck Reaction Induced by H2 Bubbling

    Directory of Open Access Journals (Sweden)

    Miki Niwa

    2010-12-01

    Full Text Available Pd was loaded on ultra stable Y (USY zeolites prepared by steaming NH4-Y zeolite under different conditions. Heck reactions were carried out over the prepared Pd/USY. We found that H2 bubbling was effective in improving not only the catalytic activity of Pd/USY, but also that of other supported Pd catalysts and Pd(OAc2. Moreover, the catalytic activity of Pd/USY could be optimized by choosing appropriate steaming conditions for the preparation of the USY zeolites; Pd loaded on USY prepared at 873 K with 100% H2O gave the highest activity (TOF = 61,000 h−1, which was higher than that of Pd loaded on other kinds of supports. The prepared Pd/USY catalysts were applicable to the Heck reactions using various kinds of substrates including bromo- and chloro-substituted aromatic and heteroaromatic compounds. Characterization of the acid properties of the USY zeolites revealed that the strong acid site (OHstrong generated as a result of steaming had a profound effect on the catalytic activity of Pd.

  16. Synthesis and characterization of magnetically recyclable Ag nanoparticles immobilized on Fe3O4@C nanospheres with catalytic activity

    Science.gov (United States)

    Li, Wei-hong; Yue, Xiu-ping; Guo, Chang-sheng; Lv, Jia-pei; Liu, Si-si; Zhang, Yuan; Xu, Jian

    2015-04-01

    A novel approach for the synthesis of Ag-loaded Fe3O4@C nanospheres (Ag-Fe3O4@C) was successfully developed. The catalysts possessed a carbon-coated magnetic core and grew active silver nanoparticles on the outer shell using hydrazine monohydrate as the AgNO3 reductant in ethanol. The morphology, inner structure, and magnetic properties of the as-prepared composites were studied with transmission electron microscopy (TEM), X-ray powder diffraction (XRD), fourier translation infrared spectroscopy (FT-IR), and vibrating sample magnetometer (VSM) techniques. Catalytic activity was investigated by degrading rhodamine B (RhB) in the designed experiment. The obtained products were monodispersed and bifunctional with high magnetization, as well as exhibited excellent catalytic activity toward organic dye with 98% of RhB conversion within 20 min in the presence of NaBH4. The product also exhibited convenient magnetic separability and maintained high catalytic activity after six cycle runs.

  17. Spectroscopic characterization of the catalytically competent ferrous site of the resting, activated, and substrate-bound forms of phenylalanine hydroxylase

    Energy Technology Data Exchange (ETDEWEB)

    Loeb, K.E.; Westre, T.E.; Hedman, B.; Hodgson, K.O.; Solomon, E.I. [Stanford Univ., CA (United States); Kappock, T.J.; Mitic, N.; Glasfeld, E.; Caradonna, J.P. [Yale Univ., New Haven, CT (United States)

    1997-02-26

    The geometric structure of the catalytically relevant ferrous active site of phenylalanine hydroxylase (PAH) has been investigated using magnetic circular dichroism (MCD) and X-ray absorption (XAS) spectroscopies. From the excited state ligand field transitions in the MCD spectrum, the temperature and field dependence of these transitions, and the XAS pre-edge shapes and intensities, the resting ferrous site of the `tense` from PAH is six-coordinate distorted octahedral. The low ligand field strength observed in the MCD spectrum results from significant oxygen ligation and longer Fe-O/N bond distances relative to model complexes as determined from an EXAFS analysis. Substrate-induced allosteric activation ({approx}34 kcal/mol) does not alter the structure of the iron site in the `relaxed` form of PAH compared to the substrate-bound `tense` state. Thus, while activation is necessary for the enzyme to achieve complete catalytic competence, it does not appear to affect the geometry of the catalytically relevent six-coordinate ferrous active site and only directly influences the surrounding protein conformation. In contrast, substrate addition results in a geometric and electronic structural change at the iron center which may help orient the substrate for completely coupled hydroxylation. 106 refs., 10 figs., 6 tabs.

  18. The MOF-driven synthesis of supported palladium clusters with catalytic activity for carbene-mediated chemistry

    Science.gov (United States)

    Fortea-Pérez, Francisco R.; Mon, Marta; Ferrando-Soria, Jesús; Boronat, Mercedes; Leyva-Pérez, Antonio; Corma, Avelino; Herrera, Juan Manuel; Osadchii, Dmitrii; Gascon, Jorge; Armentano, Donatella; Pardo, Emilio

    2017-07-01

    The development of catalysts able to assist industrially important chemical processes is a topic of high importance. In view of the catalytic capabilities of small metal clusters, research efforts are being focused on the synthesis of novel catalysts bearing such active sites. Here we report a heterogeneous catalyst consisting of Pd4 clusters with mixed-valence 0/+1 oxidation states, stabilized and homogeneously organized within the walls of a metal-organic framework (MOF). The resulting solid catalyst outperforms state-of-the-art metal catalysts in carbene-mediated reactions of diazoacetates, with high yields (>90%) and turnover numbers (up to 100,000). In addition, the MOF-supported Pd4 clusters retain their catalytic activity in repeated batch and flow reactions (>20 cycles). Our findings demonstrate how this synthetic approach may now instruct the future design of heterogeneous catalysts with advantageous reaction capabilities for other important processes.

  19. Photo-catalytic activity of Zn1-x Mn x S nanocrystals synthesized by wet chemical technique

    Directory of Open Access Journals (Sweden)

    Singh Karamjit

    2011-01-01

    Full Text Available Abstract Polyvinyl pyrrolidone capped Zn1-x Mn x S (0 ≤ x ≤ 0.1 nanocrystals have been synthesized using wet chemical co-precipitation method. Crystallographic and morphological characterization of the synthesized materials have been done using X-ray diffraction and transmission electron microscope. Crystallographic studies show the zinc blende crystals having average crystallite size approx. 3 nm, which is almost similar to the average particle size calculated from electron micrographs. Atomic absorption spectrometer has been used for qualitative and quantitative analysis of synthesized nanomaterials. Photo-catalytic activity has been studied using methylene blue dye as a test contaminant. Energy resolved luminescence spectra have been recorded for the detailed description of radiative and non-radiative recombination mechanisms. Photo-catalytic activity dependence on dopant concentration and luminescence quantum yield has been studied in detail.

  20. Mononuclear Nickel(II Complexes with Schiff Base Ligands: Synthesis, Characterization, and Catalytic Activity in Norbornene Polymerization

    Directory of Open Access Journals (Sweden)

    Yi-Mei Xu

    2017-03-01

    Full Text Available The nickel(II catalyst has manifested higher catalytic activity compared to that of other late transition metal catalysts for norbornene polymerization. Therefore, several structurally similar trans-nickel(II compounds of N,O-chelate bidentate ligands were synthesized and characterized. Both the electronic effect and the steric hindrance influence polymerization. The molecular structures of 2, 4 and 5 were further confirmed by single-crystal X-ray diffraction.

  1. Catalytic activity of tripeptidase from Lactococcus lactis to which amino acid substitution was introduced according to natural mutation.

    Science.gov (United States)

    Mori, Sumiko; Kaneko, Satoshi; Kasumi, Takafumi

    2004-05-01

    Four mutations observed between tripeptidases from Lactococcus lactis subsp. lactis and subsp. cremoris were introduced one by one to the corresponding points in wild-type tripeptidase from L. lactis subsp. lactis. The k(cat) values of four resultant mutants were analyzed and discussed in stereographical terms. Change in catalytic activity appeared to be related to the sequential and steric location of mutation point within the enzyme protein, even though no drastic change was observed with one point mutation.

  2. Engineering interface and surface of noble metal nanoparticle nanotubes toward enhanced catalytic activity for fuel cell applications.

    Science.gov (United States)

    Cui, Chun-Hua; Yu, Shu-Hong

    2013-07-16

    In order for fuel cells to have commercial viability as alternative fuel sources, researchers need to develop highly active and robust fuel cell electrocatalysts. In recent years, the focus has been on the design and synthesis of novel catalytic materials with controlled interface and surface structures. Another goal is to uncover potential catalytic activity and selectivity, as well as understand their fundamental catalytic mechanisms. Scientists have achieved great progress in the experimental and theoretical investigation due to the urgent demand for broad commercialization of fuel cells in automotive applications. However, there are still three main problems: cost, performance, and stability. To meet these targets, the catalyst needs to have multisynergic functions. In addition, the composition and structure changes of the catalysts during the reactions still need to be explored. Activity in catalytic nanomaterials is generally controlled by the size, shape, composition, and interface and surface engineering. As such, one-dimensional nanostructures such as nanowires and nanotubes are of special interest. However, these structures tend to lose the nanoparticle morphology and inhibit the use of catalysts in both fuel cell anodes and cathodes. In 2003, Rubinstein and co-workers proposed the idea of nanoparticle nanotubes (NNs), which combine the geometry of nanotubes and the morphology of nanoparticles. This concept gives both the high surface-to-volume ratio and the size effect, which are both appealing in electrocatalyst design. In this Account, we describe our developments in the construction of highly active NNs with unique surface and heterogeneous interface structures. We try to clarify enhanced activity and stability in catalytic systems by taking into account the activity impact factors. We briefly introduce material structural effects on the electrocatalytic reactivity including metal oxide/metal and metal/metal interfaces, dealloyed pure Pt, and mixed Pt

  3. Effect of structure and surface properties on the catalytic activity of nanodiamond in the conversion of 1,2-dichloroethane

    Science.gov (United States)

    Tveritinova, E. A.; Zhitnev, Yu. N.; Kulakova, I. I.; Maslakov, K. I.; Nesterova, E. A.; Kharlanov, A. N.; Ivanov, A. S.; Savilov, S. V.; Lunin, V. V.

    2015-04-01

    The catalytic activity of a detonation nanodiamond and its Ni-containing forms in the conversion of 1,2-dichloroethane is studied and compared with the activity of other carbon and nanocarbon materials: carbon nanotubes, "Dalan" synthetic diamond, and fluorinated graphite. The surface and structure of the carbon materials are characterized using XRD, diffuse reflectance IR spectroscopy, XPS, BET, and TPR. The catalytic properties of the materials are studied using the pulsed microcatalytic method. It is found that the synthetic diamond, the nanodiamond, and its Ni-containing forms are catalysts for dichloroethane conversion in a nitrogen atmosphere, where the main product is ethylene. It is noted that the catalytic activity of deactivated diamond catalysts is restored after hydrogen treatment. It is shown that the carbon structure of the nanodiamond and the "Dalan" synthetic diamond with hydrogen groups located on it plays a key role in the dichloroethane conversion. It is found that the nanodiamond acts simultaneously as a catalyst and an adsorbent of chlorine-containing products of dichloroethane conversion.

  4. Ultrafine Au and Ag Nanoparticles Synthesized from Self-Assembled Peptide Fibers and Their Excellent Catalytic Activity.

    Science.gov (United States)

    Xu, Wenlong; Hong, Yue; Hu, Yuanyuan; Hao, Jingcheng; Song, Aixin

    2016-07-18

    The self-assembly of an amphiphilic peptide molecule to form nanofibers facilitated by Ag(+) ions was investigated. Ultrafine AgNPs (NPs=nanoparticles) with an average size of 1.67 nm were synthesized in situ along the fibers due to the weak reducibility of the -SH group on the peptide molecule. By adding NaBH4 to the peptide solution, ultrafine AgNPs and AuNPs were synthesized with an average size of 1.35 and 1.18 nm, respectively. The AuNPs, AgNPs, and AgNPs/nanofibers all exhibited excellent catalytic activity toward the reduction of 4-nitrophenol, with turnover frequency (TOF) values of 720, 188, and 96 h(-1) , respectively. Three dyes were selected for catalytic degradation by the prepared nanoparticles and the nanoparticles showed selective catalysis activity toward the different dyes. It was a surprising discovery that the ultrafine AuNPs in this work had an extremely high catalytic activity toward methylene blue, with a reaction rate constant of 0.21 s(-1) and a TOF value of 1899 h(-1) .

  5. Preparation of Ru Nanocatalysts Supported on SBA-15 and Their Excellent Catalytic Activity Towards Decolorization of Various Dyes.

    Science.gov (United States)

    Ghosh, Barun; Hazra, Subhenjit; Naik, Bhanudas; Ghosh, Narendra Nath

    2015-09-01

    In this paper, we report a simple aqueous solution based chemical method for preparation Ru nanocatalysts supported on mesoporous silica SBA-15 (Ru@SBA-15) catalysts. Synthesized catalysts were characterized by powder X-ray diffraction (XRD), Optical emission spectroscopy (ICP-OES), Fourier transform infrared spectroscopy (FTIR), high resolution transmission electron microscope (HRTEM) and N2 adsorption-desorption surface area and pore size analyzer, and particle size analyzer. Catalytic activity of the synthesized catalysts towards decolorization of various dyes, such as 4-nitrophenol, Methyl Orange, Congo Red, Rhodamine B, Methylene Blue and mixture of dyes was investigated in presence of excess NaBH4. Catalysis reactions were monitored by employing UV-vis spectroscopy. Catalysis reactions followed pseudo-first order rate equation. The catalyst with 2.5 wt% Ru nanoparticle exhibited excellent catalytic activity and convenient recycling. The high catalytic activity and simple preparation methodology make 2.5Ru@SBA-15 an attractive catalyst for decolorization of organic dyes.

  6. DNMT3B isoforms without catalytic activity stimulate gene body methylation as accessory proteins in somatic cells.

    Science.gov (United States)

    Duymich, Christopher E; Charlet, Jessica; Yang, Xiaojing; Jones, Peter A; Liang, Gangning

    2016-04-28

    Promoter DNA methylation is a key epigenetic mechanism for stable gene silencing, but is correlated with expression when located in gene bodies. Maintenance and de novo DNA methylation by catalytically active DNA methyltransferases (DNMT1 and DNMT3A/B) require accessory proteins such as UHRF1 and DNMT3L. DNMT3B isoforms are widely expressed, although some do not have active catalytic domains and their expression can be altered during cell development and tumourigenesis, questioning their biological roles. Here, we show that DNMT3B isoforms stimulate gene body methylation and re-methylation after methylation-inhibitor treatment. This occurs independently of the isoforms' catalytic activity, demonstrating a similar functional role to the accessory protein DNMT3L, which is only expressed in undifferentiated cells and recruits DNMT3A to initiate DNA methylation. This unexpected role for DNMT3B suggests that it might substitute for the absent accessory protein DNMT3L to recruit DNMT3A in somatic cells.

  7. Effect of chromium oxide as active site over TiO2-PILC for selective catalytic oxidation of NO.

    Science.gov (United States)

    Zhang, Jingxin; Zhang, Shule; Cai, Wei; Zhong, Qin

    2013-12-01

    This study introduced TiO2-pillared clays (TiO2-PILC) as a support for the catalytic oxidation of NO and analyzed the performance of chromium oxides as the active site of the oxidation process. Cr-based catalysts were prepared by a wet impregnation method. It was found that the 10 wt.% chromium doping on the support achieved the best catalytic activity. At 350 degrees C, the NO conversion was 61% under conditions of GHSV = 23600 hr(-1). The BET data showed that the support particles had a mesoporous structure. H2-TPR showed that Cr(10)TiP (10 wt.% Cr doping on TiO2-PILC) clearly exhibited a smooth single peak. EPR and XPS were used to elucidate the oxidation process. During the NO + O2 adsorption, the intensity of evolution of superoxide ions (O2(-)) increased. The content of Cr3+ on the surface of the used catalyst was 40.37%, but when the used catalyst continued adsorbing NO, the Cr3+ increased to 50.28%. Additionally, O(alpha)/O(beta) increased markedly through the oxidation process. The NO conversion decreased when SO2 was added into the system, but when the SO2 was removed, the catalytic activity recovered almost up to the initial level. FT-IR spectra did not show a distinct characteristic peak of SO4(2-).

  8. Determination of the catalytic activity of binuclear metallohydrolases using isothermal titration calorimetry.

    Science.gov (United States)

    Pedroso, Marcelo M; Ely, Fernanda; Lonhienne, Thierry; Gahan, Lawrence R; Ollis, David L; Guddat, Luke W; Schenk, Gerhard

    2014-03-01

    Binuclear metallohydrolases are a large and diverse family of enzymes that are involved in numerous metabolic functions. An increasing number of members find applications as drug targets or in processes such as bioremediation. It is thus essential to have an assay available that allows the rapid and reliable determination of relevant catalytic parameters (k cat, K m, and k cat/K m). Continuous spectroscopic assays are frequently only possible by using synthetic (i.e., nonbiological) substrates that possess a suitable chromophoric marker (e.g., nitrophenol). Isothermal titration calorimetry, in contrast, affords a rapid assay independent of the chromophoric properties of the substrate-the heat associated with the hydrolytic reaction can be directly related to catalytic properties. Here, we demonstrate the efficiency of the method on several selected examples of this family of enzymes and show that, in general, the catalytic parameters obtained by isothermal titration calorimetry are in good agreement with those obtained from spectroscopic assays.

  9. Structural Basis for the Catalytic Activity of Human Serine/Threonine Protein Phosphatase-5

    Science.gov (United States)

    Swingle, M. R.; Honkanen, R.; Ciszak, E. M.

    2004-01-01

    Serinehhreonine protein phosphatase-5 (PP5) affects many signaling networks that regulate cell growth and cellular responses to stress. Here we report the crystal structure of the PP5 catalytic domain (PP5c) at a resolution of 1.6 A. From this structure we resolved the mechanism for PP5-mediated hydrolysis of phosphoprotein substrates, which requires the precise positioning of two metal ions within a con served Aspn-271-M(sub 1):M(sub 2)-W(sup 1)-His-427-His-304-Asp-274 catalytic motif. The structure of PPSc provides a structural basis for explaining the exceptional catalytic proficiency of protein phosphatases, which are among the most powerful known catalysts. Resolution of the entire C-terminus revealed a novel subdomain, and the structure of the PP5c should also aid development of type-specific inhibitors.

  10. Microbially supported synthesis of catalytically active bimetallic Pd-Au nanoparticles.

    Science.gov (United States)

    Hosseinkhani, Baharak; Søbjerg, Lina Sveidal; Rotaru, Amelia-Elena; Emtiazi, Giti; Skrydstrup, Troels; Meyer, Rikke Louise

    2012-01-01

    Bimetallic nanoparticles are considered the next generation of nanocatalysts with increased stability and catalytic activity. Bio-supported synthesis of monometallic nanoparticles has been proposed as an environmentally friendly alternative to the conventional chemical and physical protocols. In this study we synthesize bimetallic bio-supported Pd-Au nanoparticles for the first time using microorganisms as support material. The synthesis involved two steps: (1) Formation of monometallic bio-supported Pd(0) and Au(0) nanoparticles on the surface of Cupriavidus necator cells, and (2) formation of bimetallic bio-supported nanoparticles by reduction of either Au(III) or Pd(II) on to the nanoparticles prepared in step one. Bio-supported monometallic Pd(0) or Au(0) nanoparticles were formed on the surface of C. necator by reduction of Pd(II) or Au(III) with formate. Addition of Au(III) or Pd(II) to the bio-supported particles resulted in increased particle size. UV-Vis spectrophotometry and HR-TEM analyses indicated that the previously monometallic nanoparticles had become fully or partially covered by Au(0) or Pd(0), respectively. Furthermore, Energy Dispersive Spectrometry (EDS) and Fast Fourier Transformation (FFT) analyses confirmed that the nanoparticles indeed were bimetallic. The bimetallic nanoparticles did not have a core-shell structure, but were superior to monometallic particles at reducing p-nitrophenol to p-aminophenol. Hence, formation of microbially supported nanoparticles may be a cheap and environmentally friendly approach for production of bimetallic nanocatalysts. Copyright © 2011 Wiley Periodicals, Inc.

  11. Surface composition and catalytic activity of La-Fe mixed oxides for methane oxidation

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Fengxiang [School of Chemistry, Beijing Institute of Technology, Liangxiang East Road, Beijing 102488 (China); Li, Zhanping [Analysis Center, Tsinghua University, Beijing 100084 (China); Ma, Hongwei [School of Chemistry, Beijing Institute of Technology, Liangxiang East Road, Beijing 102488 (China); Gao, Zhiming, E-mail: zgao@bit.edu.cn [School of Chemistry, Beijing Institute of Technology, Liangxiang East Road, Beijing 102488 (China)

    2015-10-01

    Graphical abstract: - Highlights: • The sample with La/Fe atomic ratio of 0.94 is single phase perovskite La{sub 0.94}FeO{sub 3−d}. • The excess ironic oxide exists on the surface of the perovskite crystallites. • La{sup 3+} ions are enriched on surface of the oxides even for the La{sub 0.68}Fe sample. - Abstract: Four La-Fe oxide samples with La/Fe atomic ratio y = 1.02 ∼ 0.68 (denoted as LayFe) were prepared by the citrate method. The samples had a decreased specific surface area with the La/Fe atomic ratio decreasing. XRD pattern proved that the sample La{sub 0.94}Fe is single phase perovskite La{sub 0.94}FeO{sub 3−d}. Phase composition of the samples was estimated by the Rietveld refinement method. XPS analyses indicate that La{sup 3+} ions are enriched on surface of crystallites for all the samples, and surface carbonate ions are relatively abundant on the samples La{sub 1.02}Fe and La{sub 0.94}Fe. Catalytic activity for methane oxidation per unit surface area of the samples is in the order of La{sub 0.68}Fe > La{sub 0.76}Fe > La{sub 0.94}Fe > La{sub 1.02}Fe both in the presence and in the absence of gaseous oxygen. A reason for this order would be the higher concentration of Fe{sup 3+} ion on the surface of the samples La{sub 0.68}Fe and La{sub 0.76}Fe.

  12. Preparation and catalytic activities for H{sub 2}O{sub 2} decomposition of Rh/Au bimetallic nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Haijun, E-mail: zhanghaijun@wust.edu.cn [Key Laboratory of Integrated Exploitation of Bayan Obo Multi-Metal Resources, Inner Mongolia University of Science and Technology, Baotou 014010 (China); The State Key Laboratory of Refractory and Metallurgy, Wuhan University of Science and Technology, Wuhan 430081 (China); Deng, Xiangong; Jiao, Chengpeng; Lu, Lilin; Zhang, Shaowei [The State Key Laboratory of Refractory and Metallurgy, Wuhan University of Science and Technology, Wuhan 430081 (China)

    2016-07-15

    Graphical abstract: PVP-protected Rh/Au bimetallic nanoparticles (BNPs) were prepared by using hydrogen sacrificial reduction method, the activity of Rh80Au20 BNPs were about 3.6 times higher than that of Rh NPs. - Highlights: • Rh/Au bimetallic nanoparticles (BNPs) of 3∼5 nm in diameter were prepared. • Activity for H{sub 2}O{sub 2} decomposition of BNPs is 3.6 times higher than that of Rh NPs. • The high activity of BNPs was caused by the existence of charged Rh atoms. • The apparent activation energy for H{sub 2}O{sub 2} decomposition over the BNPs was calculated. - Abstract: PVP-protected Rh/Au bimetallic nanoparticles (BNPs) were prepared by using hydrogen sacrificial reduction method and characterized by UV–vis, XRD, FT-IR, XPS, TEM, HR-TEM and DF-STEM, the effects of composition on their particle sizes and catalytic activities for H{sub 2}O{sub 2} decomposition were also studied. The as-prepared Rh/Au BNPs possessed a high catalytic activity for the H{sub 2}O{sub 2} decomposition, and the activity of the Rh{sub 80}Au{sub 20} BNPs with average size of 2.7 nm were about 3.6 times higher than that of Rh monometallic nanoparticles (MNPs) even the Rh MNPs possess a smaller particle size of 1.7 nm. In contrast, Au MNPs with size of 2.7 nm show no any activity. Density functional theory (DFT) calculation as well as XPS results showed that charged Rh and Au atoms formed via electronic charge transfer effects could be responsible for the high catalytic activity of the BNPs.

  13. Investigation on preparation of CuO-SnO2-CeO2/γ-Al2O3 catalysts for catalytic wet air oxidation process and their catalytic activity for degradation of phenol

    Institute of Scientific and Technical Information of China (English)

    SUN Xiao-jun; ZHANG Mi-lin; WAN Jia-feng; XIA Zhi; LIU Xiao-hui; LIU hui

    2008-01-01

    Catalytic Wet Air Oxidation process is an efficient measure for treatment of wastewater with great strength which is not biodegradable. Heterocatalysts now become the key investigation subject of catalytic wet air oxidation process due to their good stability and easy separation. In the paper, CuO-SnOE-CeO2/γ-Al2O3 catalysts are prepared by impregnation method, with SnO2 as a doping component, CuO as an active component, CeO2 as a structure stabilizer, γ-Al2O3 as a substrate. XPS test is carried out to investigate the effect of Sn on the chemical surrounding of Cu and O element on the catalyst surface and their catalytic activity. It is shown that the right do-ping of Sn can increase Cu+ content on the catalyst surface, as a result the quantity of adsorption oxygen is also increased. It is found that Cu + content on the catalyst surface is one of the primary factors that determin catalytic activity of catalyst through analyzing the catalytic wet air oxidation process of phenol.

  14. Wet hydrogen peroxide catalytic oxidation of phenol with FeAC (iron-embedded activated carbon) catalysts.

    Science.gov (United States)

    Liou, Rey-May; Chen, Shih-Hsiung; Huang, Cheng-Hsien; Hung, Mu-Ya; Chang, Jing-Song; Lai, Cheng-Lee

    2010-01-01

    This investigation aims at exploring the catalytic oxidation activity of iron-embedded activated carbon (FeAC) and the application for the degradation of phenol in the wet hydrogen peroxide catalytic oxidation (WHPCO). FeAC catalysts were prepared by pre-impregnating iron in coconut shell with various iron loadings in the range of 27.5 to 46.5% before they were activated. The FeAC catalysts were characterised by measuring their surface area, pore distribution, functional groups on the surface, and X-ray diffraction patterns. The effects of iron loading strongly inhibited the pore development of the catalyst but benefited the oxidation activity in WHPCO. It was found that the complete conversion of phenol was observed with all FeAC catalysts in oxidation. High level of chemical oxygen demand (COD) abatement can be achieved within the first 30 minutes of oxidation. The iron embedded in the activated carbon showed good performance in the degradation and mineralisation of phenol during the oxidation due to the active sites as iron oxides formed on the surface of the activated carbon. It was found that the embedding irons were presented in gamma-Fe(2)O(3), alpha-Fe(2)O(3), and alpha-FeCOOH forms on the activated carbon. The aging tests on FeAC catalysts showed less activity loss, and less iron leaching was found after four oxidation runs.

  15. Probing substrate interactions in the active tunnel of a catalytically deficient cellobiohydrolase (Cel7)

    DEFF Research Database (Denmark)

    Westh, Peter; Colussi, Francieli; Sørensen, Trine Holst

    2015-01-01

    Cellobiohydrolases (CBHs) break down cellulose sequentially by sliding along the crystal surface with a single cellulose strand threaded through the catalytic tunnel of the enzyme. This so-called processive mechanism relies on a complex pattern of enzyme-substrate interactions, which need...... to be addressed in molecular descriptions of processivity and its driving forces. Here, we have used titration calorimetry to study interactions of cellooligosaccharides (COS) and a catalytically deficient variant (E212Q) of the enzyme Cel7A from Trichoderma reesei. This enzyme has about 10 glucopyranose sub...

  16. VaSP1, catalytically active serine proteinase from Vipera ammodytes ammodytes venom with unconventional active site triad.

    Science.gov (United States)

    Kurtović, Tihana; Brgles, Marija; Leonardi, Adrijana; Lang Balija, Maja; Sajevic, Tamara; Križaj, Igor; Allmaier, Günter; Marchetti-Deschmann, Martina; Halassy, Beata

    2014-01-01

    VaSP1, a serine proteinase from Vipera ammodytes ammodytes venom, is a glycosylated monomer of 31.5 kDa, as determined by MALDI mass spectrometry, showing multiple isoelectric points between pH 6.5 and pH 8.5. Partial amino acid sequencing of VaSP1 by Edman degradation and MS/MS analysis identified sequences which allowed its classification among the so-called snake venom serine proteinase homologues, members of the peptidase S1 family, however being devoid of the canonical catalytic triad. Only few representatives of this group have been identified so far with just two of them characterised in detail at the protein level. Despite substitution of His57 with Arg, VaSP1 possesses proteolytic activity which can be inhibited by Pefabloc, benzamidine, Zn²⁺ ions, DTT and trypsin inhibitor II, a Kunitz/BPTI group member. It hydrolyses N(α)-benzoyl-Phe-Val-Arg-p-NA, exhibiting Michaelis-Menten behaviour with K(m) = 48.2 μM and V(m) = 0.019 nM s⁻¹. The pH for optimal activity on tested substrate is around 9.0. VaSP1 also cleaves insulin B-chain, digesting it at positions His¹⁰-Leu¹¹, Ala¹⁴-Leu¹⁵ and Tyr¹⁶-Leu¹⁷. Furthermore, the novel serine proteinase is active towards wide array of proteins involved in haemostasis where its degradation of fibrinogen, fibrin, prothrombin, factor X and plasminogen in vivo probably results in depletion of coagulation factors in blood circulation. The possibility that VaSP1 possesses anticoagulant properties has been further indicated by its ability to prolong prothrombin time and activated partial thromboplastin time. Copyright © 2013 Elsevier Ltd. All rights reserved.

  17. Transition metal-free intramolecular regioselective couplings of aliphatic and aromatic C-H bonds.

    Science.gov (United States)

    Tian, Hua; Yang, Haijun; Zhu, Changjin; Fu, Hua

    2016-01-29

    Cross-dehydrogenative couplings of two different C-H bonds have emerged as an attractive goal in organic synthesis. However, achieving regioselective C-H activation is a great challenge because C-H bonds are ubiquitous in organic compounds. Actually, the regioselective couplings promoted by enzymes are a common occurrence in nature. Herein, we have developed simple, efficient and general transition metal-free intramolecular couplings of alphatic and aromatic C-H bonds. The protocol uses readily available aryl triazene as the radical initiator, cheap K2S2O8 as the oxidant, and the couplings were performed well with excellent tolerance of functional groups. Interestingly, α-carbon configuration of some amino acid residues in the substrates was kept after the reactions, and the couplings for substrates with substituted phenylalanine residues exhibited complete β-carbon diastereoselectivity for induction of the chiral α-carbon. Therefore, the present study should provide a novel strategy for regioselective cross-dehydrogenative couplings of two different C-H bonds.

  18. Scalable and sustainable electrochemical allylic C-H oxidation

    Science.gov (United States)

    Horn, Evan J.; Rosen, Brandon R.; Chen, Yong; Tang, Jiaze; Chen, Ke; Eastgate, Martin D.; Baran, Phil S.

    2016-05-01

    New methods and strategies for the direct functionalization of C-H bonds are beginning to reshape the field of retrosynthetic analysis, affecting the synthesis of natural products, medicines and materials. The oxidation of allylic systems has played a prominent role in this context as possibly the most widely applied C-H functionalization, owing to the utility of enones and allylic alcohols as versatile intermediates, and their prevalence in natural and unnatural materials. Allylic oxidations have featured in hundreds of syntheses, including some natural product syntheses regarded as “classics”. Despite many attempts to improve the efficiency and practicality of this transformation, the majority of conditions still use highly toxic reagents (based around toxic elements such as chromium or selenium) or expensive catalysts (such as palladium or rhodium). These requirements are problematic in industrial settings; currently, no scalable and sustainable solution to allylic oxidation exists. This oxidation strategy is therefore rarely used for large-scale synthetic applications, limiting the adoption of this retrosynthetic strategy by industrial scientists. Here we describe an electrochemical C-H oxidation strategy that exhibits broad substrate scope, operational simplicity and high chemoselectivity. It uses inexpensive and readily available materials, and represents a scalable allylic C-H oxidation (demonstrated on 100 grams), enabling the adoption of this C-H oxidation strategy in large-scale industrial settings without substantial environmental impact.

  19. Preparation of silver nanoparticles/polydopamine functionalized polyacrylonitrile fiber paper and its catalytic activity for the reduction 4-nitrophenol

    Science.gov (United States)

    Lu, Shixiang; Yu, Jianying; Cheng, Yuanyuan; Wang, Qian; Barras, Alexandre; Xu, Wenguo; Szunerits, Sabine; Cornu, David; Boukherroub, Rabah

    2017-07-01

    The study reports on the preparation of polyacrylonitrile fiber paper (PANFP) functionalized with polydopamine (PD) and silver nanoparticles (Ag NPs), named as Ag NPs/PD/PANFP. The composite material was obtained via a simple two-step chemical process. First, a thin polydopamine layer was coated onto the PANFP surface through immersion into an alkaline dopamine (pH 8.5) aqueous solution at room temperature. The reductive properties of polydopamine were further exploited for the deposition of Ag NPs. The morphology and chemical composition of the composite material were characterized using scanning electron microscopy (SEM), X-ray diffraction pattern (XRD) and X-ray photoelectron spectroscopy (XPS). The catalytic activity of the nanocomposite was evaluated for the reduction of 4-nitrophenol using sodium borohydride (NaBH4) at room temperature. The Ag NPs/PD/PANFP displayed good catalytic performance with a full reduction of 4-nitrophenol into the corresponding 4-aminophenol within 30 min. Moreover, the composite material exhibited a good stability up to 4 cycles without a significant loss of its catalytic activity.

  20. Catalytic modification of conventional SOFC anodes with a view to reducing their activity for direct internal reforming of natural gas

    Energy Technology Data Exchange (ETDEWEB)

    Boder, M.; Dittmeyer, R. [Research Group Technical Chemistry, Karl-Winnacker-Institut, DECHEMA e.V., Theodor-Heuss-Allee 25, D-60486 Frankfurt (Germany)

    2006-04-18

    When using natural gas as fuel for the solid oxide fuel cell (SOFC), direct internal reforming lowers the requirement for cell cooling and, theoretically, offers advantages with respect to capital cost and efficiency. The high metal content of a nickel/zirconia anode and the high temperature, however, cause the endothermic reforming reaction to take place very fast. The resulting drop of temperature at the inlet produces thermal stresses, which may lower the system efficiency and limit the stack lifetime. To reduce the reforming rate without lowering the electrochemical activity of the cell, a wet impregnation procedure for modifying conventional cermets by coverage with a less active metal was developed. As the coating material copper was chosen. Copper is affordable, catalytically inert for the reforming reaction and exhibits excellent electronic conductivity. The current density-voltage characteristics of the modified units showed that it is possible to maintain a good electrochemical performance of the cells despite the catalytic modification. A copper to nickel ratio of 1:3 resulted in a strong diminution of the catalytic reaction rate. This indicates that the modification could be a promising method to improve the performance of solid oxide fuel cells with direct internal reforming of hydrocarbons. (author)