WorldWideScience

Sample records for catalyst names amberlyst-15

  1. A Single-step Process to Convert Karanja Oil to Fatty Acid Methyl Esters Using Amberlyst15 as a Catalyst

    Directory of Open Access Journals (Sweden)

    Arun K. Gupta

    2018-03-01

    Full Text Available Karanja oil was successfully converted to fatty acid methyl esters (FAME in a single- step process using Amberlyst15 as a catalyst. A methanol to oil ratio of 6 was required to retain the physical structure of the Amberlyst15 catalyst. At higher methanol to oil ratios, the Amberlyst15 catalyst disintegrated. Disintegration of Amberlyst15 caused an irreversible loss in catalytic activity. This loss in activity was due to a decrease in surface area of Amberlyst15, which was caused by a decrease in its mesoporous volume. It appeared that the chemical nature of Amberlyst15 was unaffected. Reuse of Amberlyst15 with a methanol to oil ratio of 6:1 also revealed a loss in FAME yield. However, this loss in activity was recovered by heating the used Amberlyst15 catalyst to 393 K. The kinetic parameters of a power law model were successfully determined for a methanol to oil ratio of 6:1. An activation energy of 54.9 kJ mol–1 was obtained.

  2. Amberlyst-15: An Efficient and reusable heterogeneous catalyst for the synthesis of β-amino carbonyl compounds

    Directory of Open Access Journals (Sweden)

    Pathakota Venkata Ramana

    2015-12-01

    Full Text Available A simple and efficient method has been developed for the synthesis of β-amino carbonyl compounds from aromatic ketones, aldehydes and amines by Mannich reaction in the presence of amberlyst-15 as a reusable heterogeneous catalyst at room temperature under solvent-free conditions. The noteworthy advantages of the present method are short reaction times, good product yields, simple procedures and use of non-toxic catalyst.

  3. Facile Condensation of Aromatic Aldehydes with Chroman-4-ones and 1-Thiochroman-4-ones Catalysed by Amberlyst-15 under Microwave Irradiation Condition

    Directory of Open Access Journals (Sweden)

    Tapas K. Mandal

    2011-01-01

    Full Text Available Different aromatic aldehydes and cinnamaldehyde undergo cross-aldol condensation with chroman-4-ones and1-thiochroman-4-ones in the presence of amberlyst-15 under microwave irradiation in solvent free condition to afford rapidly the corresponding E-3-arylidene and E-3-cinnamylidene derivatives, respectively, in high yield. This process is simple, efficient and environmentally benign.

  4. Influência da mono-hidrogenação da fração C5 na síntese do TAME usando Amberlyst 15 como catalisador Influence of mono-hydrogenation of C5 cut on the synthesis of TAME using Amberlyst 15

    Directory of Open Access Journals (Sweden)

    Gilberto da Cunha Gonçalves

    2001-05-01

    Full Text Available No presente trabalho, foi estudada a síntese do TAME, em fase líquida, a partir de uma fração C5 e metanol, utilizando Amberlyst 15 como catalisador. A fração C5 utilizada possui uma diolefina, que tem uma alta tendência à formação de gomas e um alto teor de mono-olefinas. Deste modo, o objetivo deste trabalho foi avaliar o efeito da mono-hidrogenação da fração C5 na síntese do TAME. A hidrogenação foi feita a 80oC e 10 kgf/cm2 de H2, usando um catalisador 0,3% Pt/Al2O3. A diolefina foi totalmente hidrogenada e o teor de mono-olefinas significativamente reduzido sem um decréscimo apreciável no teor de isoamilenos reativos. A eterificação foi feita em um reator tipo batelada de 250 mL, com agitação magnética. A temperatura foi variada na faixa de 50 a 90oC, com uma pressão de 10 kgf/cm2 e razão molar isoamileno/metanol de aproximadamente um. Os produtos de reação foram analisados por cromatografia gasosa. A conversão total observada foi aproximadamente a mesma para o os cortes original e mono-hidrogenado. Entretanto, os produtos obtidos utilizando a fração C5 original apresentaram cheiro forte e coloração, mesmos para os testes a temperaturas mais baixas, que são características da formação de gomas. Por outro lado, quando a fração mono-hidrogenada foi usada na eterificação, o cheiro forte e coloração não foram observados. Portanto, a mono-hidrogenação da fração C5 contendo os isoamilenos reativos é necessária para que o TAME produzido na reação de eterificação possa ser adicionado à gasolinaTAME was synthesized in liquid phase from refinery C5 cut and methanol using Amberlyst 15 as catalyst. The C5 stream contains mainly mono-olefins and, in a less amount, a diolefin, which have a high gum formation tendency. The main purpose of this research was to evaluate the effect of mono-hydrogenation of C5 cut on TAME synthesis. The hydrogenation step was carried out at 80 oC and 10 kgf/cm2 of H2

  5. Fructose dehydration to 5-hydroxymethylfurfural over solid acid catalysts in a biphasic system

    NARCIS (Netherlands)

    Ordomskiy, V.; Schouten, J.C.; Schaaf, van der J.; Nijhuis, T.A.

    2012-01-01

    Different acidic heterogeneous catalysts like alumina, aluminosilicate, zirconium phosphate, niobic acid, ion-exchange resin Amberlyst-15, and zeolite MOR have been studied in fructose dehydration to 5-hydroxymethylfurfural (HMF). The acidity of these materials was characterized using

  6. Two-step microalgal biodiesel production using acidic catalyst generated from pyrolysis-derived bio-char

    International Nuclear Information System (INIS)

    Dong, Tao; Gao, Difeng; Miao, Chao; Yu, Xiaochen; Degan, Charles; Garcia-Pérez, Manuel; Rasco, Barbara; Sablani, Shyam S.; Chen, Shulin

    2015-01-01

    Highlights: • Highly active catalyst was prepared using bio-char co-produced in Auger pyrolysis. • Catalyst inhibitors in crude oil were effectively removed by a practical refinery process. • Free fatty acids (FFA) content in refined microalgal oil was reduced to less than 0.5%. • A total fatty acid methyl ester (FAME) yield of 99% was obtained via a two-step process. • The inexpensive bio-char catalyst is superior to Amberlyst-15 in pre-esterification. - Abstract: An efficient process for biodiesel production from fast-refined microalgal oil was demonstrated. A low cost catalyst prepared from pyrolysis-derived bio-char, was applied in pre-esterification to reduce free fatty acid (FFA) content. Results showed that the bio-char catalyst was highly active in esterification; however, the performance of the catalyst significantly reduced when crude microalgal oil was used as feedstock. To solve the problem caused by catalyst-fouling, a fast and scalable crude oil refinery procedure was carried out to remove chlorophyll and phospholipids that might degrade the catalyst and the quality of biodiesel. The activity and reusability of bio-char catalyst were remarkably improved in the fast-refined oil. FFA content in the refined microalgal oil was reduced to less than 0.5% after pre-esterification. The bio-char catalyst could be reused for 10 cycles without dramatic loss in activity. The pre-esterification fits the first-order kinetic reaction with activation energy of 42.16 kJ/mol. The activity of bio-char catalyst was superior to commercial Amberlyst-15 under the same reaction condition. A total fatty acid methyl ester (FAME, namely biodiesel) yield of 99% was obtained following the second-step CaO-catalyzed transesterification. The cost-effective bio-char catalyst has great potential for biodiesel production using feedstocks having high FFA content.

  7. Effects of water on the esterification of free fatty acids by acid catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Park, Ji-Yeon; Kim, Deog-Keun; Lee, Jin-Suk [Korea Institute of Energy Research, 71-2, Jang-dong, Yuseong-gu, Daejeon 305-343 (Korea); Wang, Zhong-Ming [Guangzhou Institute of Energy Conversion, No. 2 Nengyuan Rd, Wushan, Tianhe, Guangzhou 510-640 (China)

    2010-03-15

    To maximize the production of biodiesel from soybean soapstock, the effects of water on the esterification of high-FFA (free fatty acid) oils were investigated. Oleic acid and high acid acid oil (HAAO) were esterified by reaction with methanol in the presence of Amberlyst-15 as a heterogeneous catalyst or sulfuric acid as a homogeneous catalyst. The yield of fatty acid methyl ester (FAME) was studied at oil to methanol molar ratios of 1:3 and 1:6 and reaction temperatures of 60 and 80 C. The rate of esterification of oleic acid significantly decreased as the initial water content increased to 20% of the oil. The activity of Amberlyst-15 decreased more rapidly than that of sulfuric acid, due to the direct poisoning of acid sites by water. Esterification using sulfuric acid was not affected by water until there was a 5% water addition at a 1:6 molar ratio of oil to methanol. FAME content of HAAO prepared from soapstock rapidly increased for the first 30 min of esterification. Following the 30-min mark, the rate of FAME production decreased significantly due to the accumulation of water. When methanol and Amberlyst-15 were removed from the HAAO after 30 min of esterification and fresh methanol and a catalyst were added, the time required to reach 85% FAME content was reduced from 6 h to 1.8 h. (author)

  8. Preparation of a Carbon-Based Solid Acid Catalyst by Sulfonating Activated Carbon in a Chemical Reduction Process

    Directory of Open Access Journals (Sweden)

    Xiao-Yan Liu

    2010-10-01

    Full Text Available Sulfonated (SO3H-bearing activated carbon (AC-SO3H was synthesized by an aryl diazonium salt reduction process. The obtained material had a SO3H density of 0.64 mmol·g-1 and a specific surface area of 602 m2·g-1. The catalytic properties of AC-SO3H were compared with that of two commercial solid acid catalysts, Nafion NR50 and Amberlyst-15. In a 10-h esterification reaction of acetic acid with ethanol, the acid conversion with AC-SO3H (78% was lower than that of Amberlyst-15 (86%, which could be attributed to the fact that the SO3H density of the sulfonated carbon was lower than that of Amberlyst-15 (4.60 mmol·g-1. However, AC-SO3H exhibited comparable and even much higher catalytic activities than the commercial catalysts in the esterification of aliphatic acids with longer carbon chains such as hexanoic acid and decanoic acid, which may be due to the large specific surface area and mesoporous structures of the activated carbon. The disadvantage of AC-SO3H is the leaching of SO3H group during the reactions.

  9. New heterogeneous acid catalysts in the synthesis of biodiesel; Estudo de novos catalisadores heterogeneous acidos na sintese de biodiesel

    Energy Technology Data Exchange (ETDEWEB)

    Soldi, Rafael A.; Cesar-Oliveira, Maria Aparecida F. [Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil). Dept. de Quimica. Lab. de Polimeros Sinteticos], e-mail: mafco@quimica.ufpr.br; Oliveira, Angelo R.S.; Ramos, Luiz P. [Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil). Dept. de Quimica. Centro de Pesquisa em Quimica Aplicada (CEPESQ)

    2007-07-01

    In this work, sulfonated polystyrene compounds (PSS) were synthesized from linear polystyrene (PS). Several methods and experimental conditions were investigated for the sulfonation of PS, producing catalytically active polymeric materials with sulfonation degrees in the range of 5.0-6.2 mmol -SO{sub 3}H/g of dry polymer. The performance of these catalysts was evaluated in transesterification reactions of beef tallow and vegetable oils with ethanol and methanol. For the sake of comparison, the same reaction conditions employed for the PSS catalysts were also used for an Amberlyst 15 (3,7 mmol SO{sub 3}H/g - Aldrich). The PSS samples were shown to be insoluble in the reaction media, leading to conversion rates of 85%, 75% and 80% of the refined soybean oil, beef tallow and crude corn oil in to ethyl esters, respectively, and 94% of the refined soybean oil methyl esters. Amberlyst 15 was studied as an alternative to the process, but its conversion rate to alkyl esters was very low in the employed conditions. These results demonstrated that our synthetic PSS materials have a great potential to act as heterogeneous catalysts for transesterification. (author)

  10. Preparation of a Sulfonated Carbonaceous Material from Lignosulfonate and Its Usefulness as an Esterification Catalyst

    Directory of Open Access Journals (Sweden)

    Duckhee Lee

    2013-07-01

    Full Text Available Sulfonated carbonaceous material useful as a solid acid catalyst was prepared from lignosulfonate, a waste of the paper-making industry sulfite pulping process, and characterized by 13C-NMR, FT-IR, TGA, SEM and elemental analysis, etc. The sulfonic acid group density and total density of all acid groups in the sulfonated carbonaceous material was determined by titration to be 1.24 mmol/g and 5.90 mmol/g, respectively. Its catalytic activity in the esterification of cyclohexanecarboxylic acid with anhydrous ethanol was shown to be comparable to that of the ionic exchange resin Amberlyst-15, when they were used in the same amount. In the meantime, the sulfonic acid group was found to be leached out by 26%–29% after it was exposed to hot water (95 °C for 5 h. The catalytic usefulness of the prepared carbonaceous material was investigated by performing esterifications.

  11. Screening, optimization and kinetics of Jatropha curcas oil transesterification with heterogeneous catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Zanette, Andreia F.; Barella, Rodrigo A.; Silva, Edson A. [Department of Chemical Engineering, Universidade Estadual do Oeste do Parana, Toledo (Brazil); Pergher, Sibele B.C.; Treichel, Helen; Oliveira, Debora; Mazutti, Marcio A.; Oliveira, J. Vladimir [Department of Food Engineering, URI, Campus de Erechim, CEP 99700-000, Erechim (Brazil)

    2011-02-15

    This work investigates the production of fatty acid methyl esters (FAME) from Jatropha curcas oil using a variety of heterogeneous catalysts: resins, zeolites, clays, hydrotalcites, aluminas and niobium oxide. For this purpose, a catalyst screening was first conducted in a batch reactor at the following operating conditions: oil to methanol molar ratio of 1:9, 6 h of reaction, 5 wt% catalyst, at 333 and 393 K. From the screening step, KSF clay and Amberlyst 15 catalysts were selected to carry out a 2{sup 3} full factorial central composite rotatable design so as to elucidate the effects of process variables on FAME yield. The optimum reaction conditions for both catalysts were found to be oil to methanol molar ratio of 1:12, 5 wt% of catalyst, 433 K and 6 h of reaction with a FAME yield of about 70 wt%. A kinetic study was then experimentally performed and a semi-empirical model was built to represent the experimental data. Finally, catalyst re-utilization in five successive batch experiments was evaluated at the optimized conditions. (author)

  12. What's in a Name

    Science.gov (United States)

    Bush, Sarah B.; Albanese, Judith; Karp, Karen S.

    2016-01-01

    Historically, some baby names have been more popular during a specific time span, whereas other names are considered timeless. The Internet article, "How to Tell Someone's Age When All You Know Is Her Name" (Silver and McCann 2014), describes the phenomenon of the rise and fall of name popularity, which served as a catalyst for the…

  13. Syntheses of Calix[4]Pyrroles by Amberlyst-15 Catalyzed Cyclocondensations of Pyrrole with Selected Ketones

    Directory of Open Access Journals (Sweden)

    Tanuja Bisht

    2007-11-01

    Full Text Available A facile and efficient protocol is reported for the synthesis of calix[4]pyrrolesand N-confused calix[4]pyrroles in moderate to excellent yields by reaction of dialkyl orcycloalkyl ketones with pyrrole catalyzed by reusable AmberlystTM-15 under eco-friendlyconditions.

  14. Esterification of Palmitic Acid with Methanol in the Presence of Macroporous Ion Exchange Resin as Catalyst

    Directory of Open Access Journals (Sweden)

    Amelia Qarina Yaakob and Subhash Bhatia

    2012-10-01

    Full Text Available The esterification of palmitic acid with methanol was studied in a batch reactor using macro porous ion exchange resin Amberlyst 15 as a catalyst. Methyl palmitate was produced from the reaction between palmitic acid and methanol in the presence of catalyst. The effects of processing parameters, molar ratio of alcohol to acid M, (4-10, catalyst loading (0-10 g cat/liter, water inhibition (0-2 mol/liter, agitator speed (200-800 rpm and reaction temperature (343-373K were studied. The experimental kinetic data were correlated using homogenous as well as heterogeneous models (based on single as well as dual site mechanisms. The activation energy of the reaction was 11.552 kJ/mol for forward reaction whilst 5.464 kJ/mol for backward reaction. The experimental data fitted well with the simulated data obtained from the kinetic models. Keywords: Palmitic Acid, Methanol, Esterification, Ion Exchange Resin, Kinetics.

  15. Acid monolayer functionalized iron oxide nanoparticle catalysts

    Science.gov (United States)

    Ikenberry, Myles

    Superparamagnetic iron oxide nanoparticle functionalization is an area of intensely active research, with applications across disciplines such as biomedical science and heterogeneous catalysis. This work demonstrates the functionalization of iron oxide nanoparticles with a quasi-monolayer of 11-sulfoundecanoic acid, 10-phosphono-1-decanesulfonic acid, and 11-aminoundecanoic acid. The carboxylic and phosphonic moieties form bonds to the iron oxide particle core, while the sulfonic acid groups face outward where they are available for catalysis. The particles were characterized by thermogravimetric analysis (TGA), transmission electron microscopy (TEM), potentiometric titration, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), inductively coupled plasma optical emission spectrometry (ICP-OES), X-ray photoelectron spectrometry (XPS), and dynamic light scattering (DLS). The sulfonic acid functionalized particles were used to catalyze the hydrolysis of sucrose at 80° and starch at 130°, showing a higher activity per acid site than the traditional solid acid catalyst Amberlyst-15, and comparing well against results reported in the literature for sulfonic acid functionalized mesoporous silicas. In sucrose catalysis reactions, the phosphonic-sulfonic nanoparticles (PSNPs) were seen to be incompletely recovered by an external magnetic field, while the carboxylic-sulfonic nanoparticles (CSNPs) showed a trend of increasing activity over the first four recycle runs. Between the two sulfonic ligands, the phosphonates produced a more tightly packed monolayer, which corresponded to a higher sulfonic acid loading, lower agglomeration, lower recoverability through application of an external magnetic field, and higher activity per acid site for the hydrolysis of starch. Functionalizations with 11-aminoundecanoic acid resulted in some amine groups binding to the surfaces of iron oxide nanoparticles. This amine binding is commonly ignored in iron oxide

  16. Green acetylation of solketal and glycerol formal by heterogeneous acid catalysts to form a biodiesel fuel additive.

    Science.gov (United States)

    Dodson, Jennifer R; Leite, Thays d C M; Pontes, Nathália S; Peres Pinto, Bianca; Mota, Claudio J A

    2014-09-01

    A glut of glycerol has formed from the increased production of biodiesel, with the potential to integrate the supply chain by using glycerol additives to improve biodiesel properties. Acetylated acetals show interesting cold flow and viscosity effects. Herein, a solventless heterogeneously catalyzed process for the acetylation of both solketal and glycerol formal to new products is demonstrated. The process is optimized by studying the effect of acetylating reagent (acetic acid and acetic anhydride), reagent molar ratios, and a variety of commercial solid acid catalysts (Amberlyst-15, zeolite Beta, K-10 Montmorillonite, and niobium phosphate) on the conversion and selectivities. High conversions (72-95%) and selectivities (86-99%) to the desired products results from using acetic anhydride as the acetylation reagent and a 1:1 molar ratio with all catalysts. Overall, there is a complex interplay between the solid catalyst, reagent ratio, and acetylating agent on the conversion, selectivities, and byproducts formed. The variations are discussed and explained in terms of reactivity, thermodynamics, and reaction mechanisms. An alternative and efficient approach to the formation of 100% triacetin involves the ring-opening, acid-catalyzed acetylation from solketal or glycerol formal with excesses of acetic anhydride. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Esterification of oleic acid in a three-phase, fixed-bed reactor packed with a cation exchange resin catalyst.

    Science.gov (United States)

    Son, Sung Mo; Kimura, Hiroko; Kusakabe, Katsuki

    2011-01-01

    Esterification of oleic acid was performed in a three-phase fixed-bed reactor with a cation exchange resin catalyst (Amberlyst-15) at high temperature, which was varied from 80 to 120 °C. The fatty acid methyl ester (FAME) yields in the fixed-bed reactor were increased with increases in the reaction temperature, methanol flow rate and bed height. Moreover, the FAME yields were higher than those obtained using a batch reactor due to an equilibrium shift toward the product that resulted from continuous evaporation of the produced water. In addition, there was no catalyst deactivation during the esterification of oleic acid. However, addition of sunflower oil to the oleic acid reduced the FAME yield obtained from simultaneous esterification and transesterification. The FAME yield was 97.5% at a reaction temperature of 100 °C in the fixed-bed with a height of 5 cm when the methanol and oleic acid feed rates were 8.6 and 9.0 mL/h, respectively. Copyright © 2010 Elsevier Ltd. All rights reserved.

  18. Direct catalytic conversion of brown seaweed-derived alginic acid to furfural using 12-tungstophosphoric acid catalyst in tetrahydrofuran/water co-solvent

    International Nuclear Information System (INIS)

    Park, Geonu; Jeon, Wonjin; Ban, Chunghyeon; Woo, Hee Chul; Kim, Do Heui

    2016-01-01

    Highlights: • Furfural was produced by catalytic conversion of macroalgae-derived alginic acid. • 12-Tungstophosphoric acid (H_3PW_1_2O_4_0) showed remarkable catalytic performance. • Tetrahydrofuran (THF) as a reaction medium significantly enhanced production of furfural. - Abstract: Furfural, a biomass-derived platform chemical, was produced by acid-catalyzed reaction of alginic acid extracted from brown seaweed. Three acid catalysts, H_2SO_4, Amberlyst15 and 12-tungstophosphoric acid (H_3PW_1_2O_4_0), were compared to evaluate their catalytic performance for the alginic acid conversion. The H_3PW_1_2O_4_0 catalyst showed the highest catalytic activity, yielding the maximum furfural yield (33.8%) at 180 °C for 30 min in tetrahydrofuran/water co-solvent. Higher reaction temperature promoted the conversion of alginic acid to furfural, but the transformation of furfural to humin was also accelerated. To our knowledge, this is the highest furfural yield among studies about the direct catalytic conversion of alginic acid. Furthermore, products distribution with time-on-stream was investigated in detail, which led us to propose a reaction pathway.

  19. Synthesis of bio-additives: transesterification of ethyl acetate with glycerol using homogeneous or heterogeneous acid catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Meireles, Bruno A.; Pereira, Vera Lucia P., E-mail: patrocinio@nppn.ufrj.br [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Centro de Ciencias da Saude. Nucleo de Pesquisas de Produtos Naturais

    2013-01-15

    A new catalytic route with potential practical interest to sustainable production of bioadditives from glycerol is described. Ethyl acetate was transesterified with glycerol, in the ratio glycerol:EtOAc 1:10, at 25 or 90 deg C using 0.1 equiv.of H{sub 2}SO{sub 4} or TsOH, as homogeneous catalysts. H{sub 2}SO{sub 4} led to the total glycerol consumption in 2 h. In the equilibrium, attained in 9 h, 100% yield of a diacetin:triacetin (55:45) mixture was formed. Using Amberlyst Registered-Sign 15 dry and Amberlyst Registered-Sign 16 wet in 1:30 glycerol:EtOAc ratio and reflux at 90 Degree-Sign C the total glycerol consumption was achieved in 2 and 10h, respectively. The lower reactivity of Amberlyst-16 wet was explained in terms of deactivation of acid sites and decrease in glycerol diffusion to the inner resin pores, both factors caused by adsorbed water. The kinetics of glycerol transformation and product distribution in the equilibrium in relation to the H{sub 2}SO{sub 4}, Amberlyst-15 (dry) and Amberlyst-16 (wet) catalyzed reactions were measured. (author)

  20. Geographic Names

    Data.gov (United States)

    Minnesota Department of Natural Resources — The Geographic Names Information System (GNIS), developed by the United States Geological Survey in cooperation with the U.S. Board of Geographic Names, provides...

  1. Oxidation catalyst

    Science.gov (United States)

    Ceyer, Sylvia T.; Lahr, David L.

    2010-11-09

    The present invention generally relates to catalyst systems and methods for oxidation of carbon monoxide. The invention involves catalyst compositions which may be advantageously altered by, for example, modification of the catalyst surface to enhance catalyst performance. Catalyst systems of the present invention may be capable of performing the oxidation of carbon monoxide at relatively lower temperatures (e.g., 200 K and below) and at relatively higher reaction rates than known catalysts. Additionally, catalyst systems disclosed herein may be substantially lower in cost than current commercial catalysts. Such catalyst systems may be useful in, for example, catalytic converters, fuel cells, sensors, and the like.

  2. Fe–Al/clay as an efficient heterogeneous catalyst for solvent-free ...

    Indian Academy of Sciences (India)

    SiO2,27 amberlyst-15,28 etc. ... tometer, using Ni-filtered Cu Ka (0.15418 nm) radia- ... The spectral data of some ... C).29 1H NMR ... 3.99(q, j = 7.1 Hz, 2H), 5.12 (s,1H), 7.23 (d, j = 8.35 .... Recyclability was studied in both solvent-free and.

  3. Communicating catalysts

    Science.gov (United States)

    Weckhuysen, Bert M.

    2018-06-01

    The beauty and activity of enzymes inspire chemists to tailor new and better non-biological catalysts. Now, a study reveals that the active sites within heterogeneous catalysts actively cooperate in a fashion phenomenologically similar to, but mechanistically distinct, from enzymes.

  4. The three names

    NARCIS (Netherlands)

    Bas Jongenelen

    2011-01-01

    Two spectators are each asked to think of a girl's name (because your sister in law is pregnant and names are a big issue at the moment in your family.) You explain that you have a boy's name in your head, and you ask the spectators to think what this boy's name might be. You write three names on a

  5. Lunar CATALYST

    Data.gov (United States)

    National Aeronautics and Space Administration — Lunar Cargo Transportation and Landing by Soft Touchdown (Lunar CATALYST) is a NASA initiative to encourage the development of U.S. private-sector robotic lunar...

  6. British Sign Name Customs

    Science.gov (United States)

    Day, Linda; Sutton-Spence, Rachel

    2010-01-01

    Research presented here describes the sign names and the customs of name allocation within the British Deaf community. While some aspects of British Sign Language sign names and British Deaf naming customs differ from those in most Western societies, there are many similarities. There are also similarities with other societies outside the more…

  7. Photosystem Inspired Peptide Hybrid Catalysts

    Science.gov (United States)

    2017-06-07

    materials defined at the molecular level. We propose a novel way to make hybrid catalyst composed of inorganic nanomaterials and peptides. The...Distribution approved for public release. AF Office Of Scientific Research (AFOSR)/ IOA Arlington, Virginia 22203 Air Force Research Laboratory Air...ORGANIZATION NAME(S) AND ADDRESS(ES) SEOUL NATIONAL UNIVERSITY SNUR&DB FOUNDATION RESEARCH PARK CENTER SEOUL, 151742 KR 8. PERFORMING ORGANIZATION REPORT

  8. Highly dispersed metal catalyst

    Science.gov (United States)

    Xiao, Xin; West, William L.; Rhodes, William D.

    2016-11-08

    A supported catalyst having an atomic level single atom structure is provided such that substantially all the catalyst is available for catalytic function. A process of forming a single atom catalyst unto a porous catalyst support is also provided.

  9. Distribution of Chinese names

    Science.gov (United States)

    Huang, Ding-wei

    2013-03-01

    We present a statistical model for the distribution of Chinese names. Both family names and given names are studied on the same basis. With naive expectation, the distribution of family names can be very different from that of given names. One is affected mostly by genealogy, while the other can be dominated by cultural effects. However, we find that both distributions can be well described by the same model. Various scaling behaviors can be understood as a result of stochastic processes. The exponents of different power-law distributions are controlled by a single parameter. We also comment on the significance of full-name repetition in Chinese population.

  10. Marine Place Names

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains the geographic place names for features in the U.S territorial waters and outer continental shelf. These names can be used to find or define a...

  11. Naming as Strategic Communication

    DEFF Research Database (Denmark)

    Schmeltz, Line; Kjeldsen, Anna Karina

    2016-01-01

    This article presents a framework for understanding corporate name change as strategic communication. From a corporate branding perspective, the choice of a new name can be seen as a wish to stand out from a group of similar organizations. Conversely, from an institutional perspective, name change...

  12. Sputtered catalysts

    International Nuclear Information System (INIS)

    Tyerman, W.J.R.

    1978-01-01

    A method is described for preparing a supported catalyst by a sputtering process. A material that is catalytic, or which is a component of a catalytic system, is sputtered on to the surface of refractory oxide particles that are compatible with the sputtered material and the sputtered particles are consolidated into aggregate form. The oxide particles before sputtering should have a diameter in the range 1000A to 50μ and a porosity less than 0.4 ml/g, and may comprise MgO, Al 2 O 3 or SiO 2 or mixtures of these oxides, including hydraulic cement. The particles may possess catalytic activity by themselves or in combination with the catalytic material deposited on them. Sputtering may be effected epitaxially and consolidation may be effected by compaction pelleting, extrusion or spray drying of a slurry. Examples of the use of such catalysts are given. (U.K.)

  13. The Name Game.

    Science.gov (United States)

    Crawley, Sharon J.

    Described is a game which provides a method for teaching students to locate cities and towns on a map. Students are provided with a list of descriptive phrases which stand for the name of a city, e.g., hot weather town (Summerville, Georgia); a chocolate candy bar (Hershey, Pennsylvania). Using a map, students must then try to find the name of a…

  14. Directory of awardee names

    Energy Technology Data Exchange (ETDEWEB)

    1999-07-01

    Standardization of grant and contract awardee names has been an area of concern since the development of the Department`s Procurement and Assistance Data System (PADS). A joint effort was begun in 1983 by the Office of Scientific and Technical Information (OSTI) and the Office of Procurement and Assistance Management/Information Systems and Analysis Division to develop a means for providing uniformity of awardee names. As a result of this effort, a method of assigning vendor identification codes to each unique awardee name, division, city, and state combination was developed and is maintained by OSTI. Changes to vendor identification codes or awardee names contained in PADS can be made only by OSTI. Awardee names in the Directory indicate that the awardee has had a prime contract (excluding purchase orders of $10,000 or less) with, or a financial assistance award from, the Department. Award status--active, inactive, or retired--is not shown. The Directory is in alphabetic sequence based on awardee name and reflects the OSTI-assigned vendor identification code to the right of the name. A vendor identification code is assigned to each unique awardee name, division, city, and state (for place of performance). The same vendor identification code is used for awards throughout the Department.

  15. Name agreement in picture naming : An ERP study

    NARCIS (Netherlands)

    Cheng, Xiaorong; Schafer, Graham; Akyürek, Elkan G.

    Name agreement is the extent to which different people agree on a name for a particular picture. Previous studies have found that it takes longer to name low name agreement pictures than high name agreement pictures. To examine the effect of name agreement in the online process of picture naming, we

  16. An introduction to catalyst

    International Nuclear Information System (INIS)

    Jeon, Hak Je

    1988-11-01

    This book explains basic conception of catalyst such as definition, velocity of chemical reaction and velocity of catalyst reaction, absorption with absorption energy and chemical absorption, pore structure with the role of pore and measurement of pore structure, catalyst activity on solid structure, electrical property on catalyst activity, choice and design of catalyst, catalytic reaction with reaction velocity and chemical equilibrium and reaction velocity model, measurement of reaction velocity and material analysis, catalyst for mixed compound, catalyst for solid acid and catalyst for supported metal.

  17. "Name" that Animal

    Science.gov (United States)

    Laird, Shirley

    2010-01-01

    In this article, the author describes a texture and pattern project. Students started by doing an outline contour drawing of an animal. With the outline drawn, the students then write one of their names to fit "inside" the animal.

  18. Direct transformation of carbohydrates to the biofuel 5-ethoxymethylfurfural by solid acid catalysts

    DEFF Research Database (Denmark)

    Li, Hu; Shunmugavel, Saravanamurugan; Yang, Song

    2016-01-01

    employed, dealuminated beta zeolites [DeAl-H-beta-12.5 (700)] gave a moderate yield of EMF (37%) in a single step catalytic process. A combined catalytic system consisting of H-form zeolite and Amberlyst-15 was found to be more efficient for the transformation of glucose to EMF (46%) via an one-pot, two......-step reaction protocol. Alternative biomass-based mono-, di- and polysaccharides formed also moderate to good yields of EMF with the catalytic systems, including fructose which yielded 67 % of EMF and 4% of ethyl levulinate (ELevu) along with 10 % 5-hydroxymethylfurfural (HMF) in the combined reaction protocol...... recovery and thermal stability during regeneration....

  19. MULTIPATH COMMUNICATIONS USING NAMES

    OpenAIRE

    Purushothama, Rashmi

    2011-01-01

    Increased host mobility, and multi-homing make IP address management very complex in applications. Due to host mobility, the IP address of a host may change dynamically, and also frequently. Multi-homing leads to multiple IP addresses for a single host. Name-based socket is a solution to address the complex IP address management. It relieves the applications from the overhead, and moves it to the operating system. It uses a constant name, instead of an IP address to establish a connection, th...

  20. Measuring name system health

    NARCIS (Netherlands)

    Casalicchio, Emiliano; Caselli, Marco; Coletta, Alessio; Di Blasi, Salvatore; Fovino, Igor Nai; Butts, Jonathan; Shenoi, Sujeet

    2012-01-01

    Modern critical infrastructure assets are exposed to security threats arising from their use of IP networks and the Domain Name System (DNS). This paper focuses on the health of DNS. Indeed, due to the increased reliance on the Internet, the degradation of DNS could have significant consequences for

  1. Theriocide: Naming Animal Killing

    Directory of Open Access Journals (Sweden)

    Piers Beirne

    2014-08-01

    Full Text Available In this essay I recommend ‘theriocide’ as the name for those diverse human actions that cause the deaths of animals. Like the killing of one human by another, theriocide may be socially acceptable or unacceptable, legal or illegal. It may be intentional or unintentional and may involve active maltreatment or passive neglect. Theriocide may occur one-on-one, in small groups or in large-scale social institutions. The numerous and sometimes intersecting sites of theriocide include intensive rearing regimes; hunting and fishing; trafficking; vivisection; militarism; pollution; and human-induced climate change. If the killing of animals by humans is as harmful to them as homicide is to humans, then the proper naming of such deaths offers a remedy, however small, to the extensive privileging of human lives over those of other animals. Inevitably, the essay leads to a shocking question: Is theriocide murder?

  2. Names For Free

    DEFF Research Database (Denmark)

    Pouillard, Nicolas; Bernardy, Jean-Philippe

    2013-01-01

    We propose a novel technique to represent names and binders in Haskell. The dynamic (run-time) representation is based on de Bruijn indices, but it features an interface to write and manipulate variables conviently, using Haskell-level lambdas and variables. The key idea is to use rich types...... and manipulation in a natural way, while retaining the good properties of representations based on de Bruijn indices....

  3. Design of heterogeneous catalysts

    DEFF Research Database (Denmark)

    Frey, Anne Mette

    was inspired by a computational screening, suggesting that alloys such as Ni-Fe, Co-Ni, and Co-Fe should show superior activity to the industrially used nickel catalyst. Especially the Ni-Fe system was considered to be interesting, since such alloy catalysts should be both more active and cheaper than the Ni...... catalyst. The results from the screening were experimentally verified for CO hydrogenation, CO2 hydrogenation, and simultaneous CO and CO2 hydrogenation by bimetallic Ni-Fe catalysts. These catalysts were found to be highly active and selective. The Co-Ni and Co-Fe systems were investigated for CO...... well, and the best catalyst prepared had a C5+ yield almost a factor of two higher than a standard air calcined Co catalyst. In the NH3-SCR reaction it is desirable to develop an active and stable catalyst for NOx removal in automotive applications, since the traditionally used vanadium-based catalyst...

  4. Heterogeneously Catalysed Aldol Reactions in Supercritical Carbon Dioxide as Innovative and Non-Flammable Reaction Medium

    DEFF Research Database (Denmark)

    Musko, Nikolai; Grunwaldt, Jan-Dierk

    2011-01-01

    Aldol reactions of several aldehydes have been investigated over acidic and basic catalysts in supercritical carbon dioxide at 180 bar and 100 °C. Both acidic (Amberlyst-15, tungstosilicic acid (TSA) on SiO2 and MCM-41) and basic (hydrotalcite) materials showed interesting performance in this pre...

  5. Conversion of methanol and isobutanol to MTBE

    CSIR Research Space (South Africa)

    Nicolaides, CP

    1993-09-24

    Full Text Available Over the resin catalyst Amberlyst 15, and under our reaction conditions, the yield of MTBE (methyl tert-butyl ether), from the reaction of methanol and isobutene, is at a maximum in the temperature rang of 40-60-degrees-C. Slightly higher...

  6. Biphasic single-reactor process for dehydration of xylose and hydrogenation of produced furfural

    NARCIS (Netherlands)

    Ordomskiy, V.; Schouten, J.C.; Schaaf, van der J.; Nijhuis, T.A.

    2013-01-01

    The processes of xylose dehydration and the consecutive furfural hydrogenation have been combined in a single biphasic reactor. The dehydration was studied over Amberlyst-15 and the hydrogenation over a hydrophobic Ru/C catalyst. 1-Butanol, 2-methyltetrahydrofuran and cyclohexane were used as

  7. What's in a Name?

    Science.gov (United States)

    Bonneau, Joseph; Just, Mike; Matthews, Greg

    We study the efficiency of statistical attacks on human authentication systems relying on personal knowledge questions. We adapt techniques from guessing theory to measure security against a trawling attacker attempting to compromise a large number of strangers' accounts. We then examine a diverse corpus of real-world statistical distributions for likely answer categories such as the names of people, pets, and places and find that personal knowledge questions are significantly less secure than graphical or textual passwords. We also demonstrate that statistics can be used to increase security by proactively shaping the answer distribution to lower the prevalence of common responses.

  8. What's in a name?

    Science.gov (United States)

    Whalley, Mark

    2008-03-01

    During a lesson with my A-level physics class, my school's head of English came into the lab and happened to notice the whiteboard. I had just started teaching a section on particle physics and was acquainting the students with the multitude of names found in the particle world. Among others, the board contained the words lepton, hadron, meson, baryon, photon, gluon, boson, muon, neutrino, fermion and quark. The head of English pointed out that none of the words on the board were intelligible to anyone else in the school. He added that the words themselves were utterly bizarre, although in fairness he did recognize the reference to James Joyce.

  9. Branding a business name

    Directory of Open Access Journals (Sweden)

    Bulatović Ivan

    2016-01-01

    Full Text Available The process of globalization, international businesses, as well as competitive markets imposed the companies (large ones, as well as the others to position in the required market. Making profit, which is the basic aim of every company, in such market environment can only be achieved by demonstrating distinct characteristics of a company, the characteristics which distinguish it from others with the same or similar activities. Historical and analysis of the current market have shown that being recognizable in the multitude of similar companies is a huge challenge, but also one of the main preconditions for successful operations. The moment a company is registered it acquires a specific identity primarily owing to its business name, which distinguishes it from other companies during that first period. Practically at the same time, the company starts creating its image or goodwill by means of several distinctive ways. One of them is branding business name or corporate branding. However, apart from large benefits, companies may also have big difficulties and risks in the same process as well.

  10. Named Entity Linking Algorithm

    Directory of Open Access Journals (Sweden)

    M. F. Panteleev

    2017-01-01

    Full Text Available In the tasks of processing text in natural language, Named Entity Linking (NEL represents the task to define and link some entity, which is found in the text, with some entity in the knowledge base (for example, Dbpedia. Currently, there is a diversity of approaches to solve this problem, but two main classes can be identified: graph-based approaches and machine learning-based ones. Graph and Machine Learning approaches-based algorithm is proposed accordingly to the stated assumptions about the interrelations of named entities in a sentence and in general.In the case of graph-based approaches, it is necessary to solve the problem of identifying an optimal set of the related entities according to some metric that characterizes the distance between these entities in a graph built on some knowledge base. Due to limitations in processing power, to solve this task directly is impossible. Therefore, its modification is proposed. Based on the algorithms of machine learning, an independent solution cannot be built due to small volumes of training datasets relevant to NEL task. However, their use can contribute to improving the quality of the algorithm. The adaptation of the Latent Dirichlet Allocation model is proposed in order to obtain a measure of the compatibility of attributes of various entities encountered in one context.The efficiency of the proposed algorithm was experimentally tested. A test dataset was independently generated. On its basis the performance of the model was compared using the proposed algorithm with the open source product DBpedia Spotlight, which solves the NEL problem.The mockup, based on the proposed algorithm, showed a low speed as compared to DBpedia Spotlight. However, the fact that it has shown higher accuracy, stipulates the prospects for work in this direction.The main directions of development were proposed in order to increase the accuracy of the system and its productivity.

  11. HZSM-5 Catalyst for Cracking Palm Oil to Gasoline: A Comparative Study with and without Impregnation

    OpenAIRE

    Achmad Roesyadi; Danawati Hariprajitno; Nurjannah Nurjannah; Santi Dyah Savitri

    2013-01-01

    It is important to develop a renewable source of energy to overcome a limited source fossil energy. Palm oil is a potential alternative and environmental friendly energy resource in Indonesia due to high production capacity of this vegetable oil. The research studied effect of catalyst to selectivity of biofuel product from cracking of palm oil. The catalyst consisted of HZSM-5 catalyst with or without impregnation. The research was conducted in two steps, namely catalyst synthesized and cata...

  12. Socioeconomic determinants of first names

    NARCIS (Netherlands)

    Bloothooft, G.; Onland, D.

    2011-01-01

    Modern naming practices in the Netherlands between 1982 and 2005 were studied on the basis of 1409 popular first names, divided into fourteen name groups determined by the common preferences of parents for the names involved. Socioeconomic variables such as family income, parents' level of

  13. Dictionary of Alaska place names

    Science.gov (United States)

    Orth, Donald J.

    1971-01-01

    This work is an alphabetical list of the geographic names that are now applied and have been applied to places and features of the Alaska landscape. Principal names, compiled from modem maps and charts and printed in boldface type, generally reflect present-day local usage. They conform to the principles of the U.S. Board on Geographic Names for establishing standard names for use on Government maps and in other Government publications. Each name entry gives the present-day spelling along with variant spellings and names; identifies the feature named; presents the origin and history of the name; and, where possible, gives the meaning of an Eskimo, Aleut, Indian, or foreign name. Variant, obsolete, and doubtful names are alphabetically listed and are cross referenced, where necessary, to the principal entries.

  14. History of NAMES Conferences

    Science.gov (United States)

    Filippov, Lev

    2013-03-01

    Franco-Russian NAMES Seminars are held for the purpose of reviewing and discussing actual developments in the field of materials science by researchers from Russia and from the Lorraine Region of France. In more precise terms, as set down by the organizers of the seminar (the Moscow Institute of Steel and Alloys and the Institut National Polytechnique de Lorraine), the mission of the seminars is as follows: the development of scientific and academic contacts, giving a new impulse to joint fundamental research and technology transfer the development and consolidation of scientific, technical and business collaboration between the regions of Russia and Lorraine through direct contact between the universities, institutes and companies involved The first Seminar took place on 27-29 October 2004, at the Institut National Polytechnique de Lorraine (on the premises of the Ecole Européenne d'Ingénieurs en Génie des Matériaux, Nancy, France). The number, variety and quality of the oral presentations given and posters exhibited at the first Seminar were of high international standard. 30 oral presentations were given and 72 posters were presented by 19 participants from five universities and three institutes of the Russian Academy of Sciences participants from 11 laboratories of three universities from the Lorraine region three industrial companies, including the European Aeronautic Defence and Space Company—EADS, and ANVAR (Agence Nationale de Valorisation de la Recherche) From 2005 onwards, it was decided to organize the Seminar every other year. The second Seminar convened on the occasion of the 75th Anniversary of the Moscow Institute of Steel and Alloys on 10-12 November 2005 in Moscow, Russia. The seminar demonstrated the efficiency of the scientific partnership founded between the research groups of Russia and France during the first Seminar. High productivity of the Franco-Russian scientific cooperation on the basis of the Research-Educational Franco

  15. Methods of making textured catalysts

    Science.gov (United States)

    Werpy, Todd [West Richland, WA; Frye, Jr., John G.; Wang, Yong [Richland, WA; Zacher, Alan H [Kennewick, WA

    2010-08-17

    A textured catalyst having a hydrothermally-stable support, a metal oxide and a catalyst component is described. Methods of conducting aqueous phase reactions that are catalyzed by a textured catalyst are also described. The invention also provides methods of making textured catalysts and methods of making chemical products using a textured catalyst.

  16. Can You Say My Name?

    DEFF Research Database (Denmark)

    Erz, Antonia; Christensen, Bo T.

    Whereas brand name research has focused on the semantic meaning or sounds of names, processing fluency lends further support to the idea that meaning goes beyond semantics. Extant research has shown that phonological fluency, i.e., the ease or difficulty with which people pronounce names, can...

  17. A family of names : rune-names and ogam-names and their relation to alphabet letter-names

    NARCIS (Netherlands)

    Griffiths, Alan

    2013-01-01

    The current consensus is that vernacular names assigned to the runes of the Germanic fuþark and to Irish ogam characters are indigenous creations independent of Mediterranean alphabet traditions. I propose, however, that ogam-names are based on interpretations of Hebrew, Greek or Latin letter-names

  18. Alloy catalyst material

    DEFF Research Database (Denmark)

    2014-01-01

    The present invention relates to a novel alloy catalyst material for use in the synthesis of hydrogen peroxide from oxygen and hydrogen, or from oxygen and water. The present invention also relates to a cathode and an electrochemical cell comprising the novel catalyst material, and the process use...... of the novel catalyst material for synthesising hydrogen peroxide from oxygen and hydrogen, or from oxygen and water....

  19. Metal catalysts fight back

    OpenAIRE

    George Marsh

    1998-01-01

    In recent years organometallic catalysts, especially metallocenes, have been a major focus of attention in terms of polymerisation chemistry. But the news earlier this year of a family of iron-based catalysts able to rival the effectiveness of both conventional and metallocene catalysts in the polymerisation of ethylene has excited the plastics industry. Because of the impact of this discovery and its potential as a route to lower-priced commodity plastics in the future, it may be useful at t...

  20. GEOGRAPHIC NAMES INFORMATION SYSTEM (GNIS) ...

    Science.gov (United States)

    The Geographic Names Information System (GNIS), developed by the U.S. Geological Survey in cooperation with the U.S. Board on Geographic Names (BGN), contains information about physical and cultural geographic features in the United States and associated areas, both current and historical, but not including roads and highways. The database also contains geographic names in Antarctica. The database holds the Federally recognized name of each feature and defines the location of the feature by state, county, USGS topographic map, and geographic coordinates. Other feature attributes include names or spellings other than the official name, feature designations, feature class, historical and descriptive information, and for some categories of features the geometric boundaries. The database assigns a unique feature identifier, a random number, that is a key for accessing, integrating, or reconciling GNIS data with other data sets. The GNIS is our Nation's official repository of domestic geographic feature names information.

  1. Preparation of biodiesel from soybean oil by using heterogeneous catalyst

    Energy Technology Data Exchange (ETDEWEB)

    Ferdous, Kaniz; Rakib Uddin, M.; Islam, M.A. [Department of Chemical Engineering and Polymer Science, Shah Jalal University of Science and Technology, Sylhet 3114 (Bangladesh); Khan, Maksudur R. [Department of Chemical Engineering and Polymer Science, Shah Jalal University of Science and Technology, Sylhet 3114 (Bangladesh); Faculty of Chemical and Natural Resources Engineering, University Malaysia Pahang, 26300 Gambang, Kuantan, Pahang (Malaysia)

    2013-07-01

    The predicted shortage of fossil fuels and related environmental concerns has recently attracted significant attention to search alternative fuel. Biodiesel is one of the alternatives to fossil fuel. Now-a-days, most biodiesel is produced by the transesterification of oils using methanol and a homogeneous base catalyst. The use of homogeneous catalysts is normally limited to batch mode processing followed by a catalyst separation step. The immiscible glycerol phase, which accumulates during the course of the reaction, solubilizes the homogeneous base catalyst and therefore, withdraws from the reaction medium. Moreover, other difficulties of using homogeneous base catalysts relate to their sensitivity to free fatty acid (FFA) and water and resulting saponification phenomenon. High energy consumption and costly separation of the catalyst from the reaction mixture have inspired the use of heterogeneous catalyst. The use of heterogeneous catalysts does not lead to the formation of soaps through neutralization of FFA and saponification of oil. In the present paper, biodiesel was prepared from crude (soybean) oil by transesterification reaction using heterogeneous base catalyst name calcium oxide (CaO). Various reaction parameters were optimized and the biodiesel properties were evaluated.

  2. Hydroxide catalysts for lignin depolymerization

    Energy Technology Data Exchange (ETDEWEB)

    Beckham, Gregg T.; Biddy, Mary J.; Chmely, Stephen C.; Sturgeon, Matthew

    2017-04-25

    Solid base catalysts and their use for the base-catalyzed depolymerization (BCD) of lignin to compounds such as aromatics are presented herein. Exemplary catalysts include layered double hydroxides (LDHs) as recyclable, heterogeneous catalysts for BCD of lignin.

  3. Hydroxide catalysts for lignin depolymerization

    Science.gov (United States)

    Beckham, Gregg T; Biddy, Mary J.; Kruger, Jacob S.; Chmely, Stephen C.; Sturgeon, Matthew

    2017-10-17

    Solid base catalysts and their use for the base-catalyzed depolymerization (BCD) of lignin to compounds such as aromatics are presented herein. Exemplary catalysts include layered double hydroxides (LDHs) as recyclable, heterogeneous catalysts for BCD of lignin.

  4. Hydroprocessing catalyst development

    Energy Technology Data Exchange (ETDEWEB)

    Boorman, P.M.; Kydd, R.A.; Sorensen, T.S.; Chong, K.; Lewis, J.

    1992-08-01

    Co-Mo and Ni-Mo hydroprocessing catalysts were examined for their activity in removal of sulfur from thiophene in model compounds, and in the cracking and hydrocracking of cumene. Three types of support materials were examined: carbon, modified carbon, and carbon covered alumina. The objective of the study was to examine the correlation between catalyst activity in the hydrodenitrogenation of model compounds, and the resistance of the catalyst to nitrogen poisoning during use in the hydroprocessing of gas oils. The use of model compound testing provided information on the individual catalytic reactions promoted by those materials. Infrared spectroscopy was used to study surface species on the catalysts and to explain many of the trends in activity observed, revealing the role of fluoride and phosphorus as a secondary promoter. Testing of the catalysts in hydrotreating of gas oils allowed comparison of model compound results with those from a real feedstock. The gas oil was also spiked with a model nitrogen compound and the results from catalytic hydrotreating of this material were compared with those from unspiked material. A key finding was that the carbon supported catalysts were the most effective in treating high-nitrogen feeds. The very favorable deactivation properties of carbon and carbon-covered alumina supported catalysts make these promising from an industrial point of view where catalyst deactivation is a limiting factor. 171 refs., 25 figs., 43 tabs.

  5. Catalyst for hydrocarbon conversion

    International Nuclear Information System (INIS)

    Duhaut, P.; Miquel, J.

    1975-01-01

    A description is given for a catalyst and process for hydrocarbon conversions, e.g., reforming. The catalyst contains an alumina carrier, platinum, iridium, at least one metal selected from uranium, vanadium, and gallium, and optionally halogen in the form of metal halide of one of the aforesaid components. (U.S.)

  6. Catalyst for Ammonia Oxidation

    DEFF Research Database (Denmark)

    2015-01-01

    The present invention relates to a bimetallic catalyst for ammonia oxidation, a method for producing a bimetallic catalyst for ammonia oxidation and a method for tuning the catalytic activity of a transition metal. By depositing an overlayer of less catalytic active metal onto a more catalytic...

  7. Magnetic catalyst bodies

    NARCIS (Netherlands)

    Teunissen, Wendy; Bol, A.A.; Geus, John W.

    1999-01-01

    After a discussion about the importance of the size of the catalyst bodies with reactions in the liquid-phase with a suspended catalyst, the possibilities of magnetic separation are dealt with. Deficiencies of the usual ferromagnetic particles are the reactivity and the clustering of the

  8. Reducible oxide based catalysts

    Science.gov (United States)

    Thompson, Levi T.; Kim, Chang Hwan; Bej, Shyamal K.

    2010-04-06

    A catalyst is disclosed herein. The catalyst includes a reducible oxide support and at least one noble metal fixed on the reducible oxide support. The noble metal(s) is loaded on the support at a substantially constant temperature and pH.

  9. Names of Southern African grasses: Name changes and additional ...

    African Journals Online (AJOL)

    The main reasons for changes in botanical names are briefly reviewed, with examples from the lists. At this time, about 1040 grass species and subspecific taxa are recognized in the subcontinent. Keywords: botanical research; botanical research institute; botany; grass; grasses; identification; name change; nomenclature; ...

  10. Cognitive components of picture naming.

    Science.gov (United States)

    Johnson, C J; Paivio, A; Clark, J M

    1996-07-01

    A substantial research literature documents the effects of diverse item attributes, task conditions, and participant characteristics on the case of picture naming. The authors review what the research has revealed about 3 generally accepted stages of naming a pictured object: object identification, name activation, and response generation. They also show that dual coding theory gives a coherent and plausible account of these findings without positing amodal conceptual representations, and they identify issues and methods that may further advance the understanding of picture naming and related cognitive tasks.

  11. Fictional names and fictional discourse

    OpenAIRE

    Panizza, Chiara

    2017-01-01

    [eng] In this dissertation I present a critical study of fiction, focusing on the semantics of fictional names and fictional discourse. I am concerned with the issue of whether fictional names need to refer, and also with the related issue of whether fictional characters need to exist, in order to best account for our linguistic practices involving fictional names. Fictional names like ‘Sherlock Holmes’, ‘Anna Karenina’, ‘Emma Woodhouse’ and ‘Don Quixote of La Mancha’ ordinarily occur in diff...

  12. Catalysts, methods of making catalysts, and methods of use

    KAUST Repository

    Renard, Laetitia; El Eter, Mohamad; Caps, Valerie; Basset, Jean-Marie

    2014-01-01

    Embodiments of the present disclosure provide for catalysts, methods of making catalysts, methods of using catalysts, and the like. In an embodiment, the method of making the catalysts can be performed in a single step with a metal nanoparticle precursor and a metal oxide precursor, where a separate stabilizing agent is not needed.

  13. Catalysts, methods of making catalysts, and methods of use

    KAUST Repository

    Renard, Laetitia

    2014-03-06

    Embodiments of the present disclosure provide for catalysts, methods of making catalysts, methods of using catalysts, and the like. In an embodiment, the method of making the catalysts can be performed in a single step with a metal nanoparticle precursor and a metal oxide precursor, where a separate stabilizing agent is not needed.

  14. Etherification of Glycerol with Propylene or 1-Butene for Fuel Additives

    Directory of Open Access Journals (Sweden)

    Chakrapong Saengarun

    2017-01-01

    Full Text Available The etherification of glycerol with propylene over acidic heterogeneous catalysts, Amberlyst-15, S100, and S200 resins, produced mono-propyl glycerol ethers (MPGEs, 1,3-di- and 1,2-di-propyl glycerol ethers (DPGEs, and tri-propyl glycerol ether (TPGE. The propylation of glycerol over Amberlyst-15 yielded only TPGE. The glycerol etherification with 1-butene over Amberlyst-15 and S200 resins produced 1-mono-, 2-mono-, 1,2-di-, and 1,3-di-butyl glycerol ethers (1-MBGE, 2-MBGE, 1,2-DBGE, and 1,3-DBGE. The use of Amberlyst-15 resulted in the propylation and butylation of glycerol with higher yields than those obtained from the S100 and S200 resins. The PGEs, TPGE, and BGEs were evaluated as cold flow improvers and octane boosters. These alkyl glycerol ethers can reduce the cloud point of blended palm biodiesels with diesel. They can increase the research octane number and the motor octane number of gasoline.

  15. A name is a name is a name: some thoughts and personal opinions about molluscan scientific names

    NARCIS (Netherlands)

    Dance, S.P.

    2009-01-01

    Since 1758, with the publication of Systema Naturae by Linnaeus, thousands of scientific names have been proposed for molluscs. The derivation and uses of many of them are here examined from various viewpoints, beginning with names based on appearance, size, vertical distribution, and location.

  16. Catalyst in Basic Oleochemicals

    Directory of Open Access Journals (Sweden)

    Eva Suyenty

    2007-10-01

    Full Text Available Currently Indonesia is the world largest palm oil producer with production volume reaching 16 million tones per annum. The high crude oil and ethylene prices in the last 3 – 4 years contribute to the healthy demand growth for basic oleochemicals: fatty acids and fatty alcohols. Oleochemicals are starting to replace crude oil derived products in various applications. As widely practiced in petrochemical industry, catalyst plays a very important role in the production of basic oleochemicals. Catalytic reactions are abound in the production of oleochemicals: Nickel based catalysts are used in the hydrogenation of unsaturated fatty acids; sodium methylate catalyst in the transesterification of triglycerides; sulfonic based polystyrene resin catalyst in esterification of fatty acids; and copper chromite/copper zinc catalyst in the high pressure hydrogenation of methyl esters or fatty acids to produce fatty alcohols. To maintain long catalyst life, it is crucial to ensure the absence of catalyst poisons and inhibitors in the feed. The preparation methods of nickel and copper chromite catalysts are as follows: precipitation, filtration, drying, and calcinations. Sodium methylate is derived from direct reaction of sodium metal and methanol under inert gas. The sulfonic based polystyrene resin is derived from sulfonation of polystyrene crosslinked with di-vinyl-benzene. © 2007 BCREC UNDIP. All rights reserved.[Presented at Symposium and Congress of MKICS 2007, 18-19 April 2007, Semarang, Indonesia][How to Cite: E. Suyenty, H. Sentosa, M. Agustine, S. Anwar, A. Lie, E. Sutanto. (2007. Catalyst in Basic Oleochemicals. Bulletin of Chemical Reaction Engineering and Catalysis, 2 (2-3: 22-31.  doi:10.9767/bcrec.2.2-3.6.22-31][How to Link/DOI: http://dx.doi.org/10.9767/bcrec.2.2-3.6.22-31 || or local: http://ejournal.undip.ac.id/index.php/bcrec/article/view/6

  17. ALKALI RESISTANT CATALYST

    DEFF Research Database (Denmark)

    2008-01-01

    The present invention concerns the selective removal of nitrogen oxides (NOx) from gasses. In particular, the invention concerns a process, a catalyst and the use of a catalyst for the selective removal of nitrogen oxides in the presence of ammonia from gases containing a significant amount...... of alkali metal and/or alkali-earth compounds which process comprises using a catalyst combined of (i) a formed porous superacidic support, said superacidic support having an Hammett acidity stronger than Ho=-12, and (ii) a metal oxide catalytic component deposited on said superacidic support selected from...

  18. Multi-language naming game

    Science.gov (United States)

    Zhou, Jianfeng; Lou, Yang; Chen, Guanrong; Tang, Wallace K. S.

    2018-04-01

    Naming game is a simulation-based experiment used to study the evolution of languages. The conventional naming game focuses on a single language. In this paper, a novel naming game model named multi-language naming game (MLNG) is proposed, where the agents are different-language speakers who cannot communicate with each other without a translator (interpreter) in between. The MLNG model is general, capable of managing k different languages with k ≥ 2. For illustration, the paper only discusses the MLNG with two different languages, and studies five representative network topologies, namely random-graph, WS small-world, NW small-world, scale-free, and random-triangle topologies. Simulation and analysis results both show that: 1) using the network features and based on the proportion of translators the probability of establishing a conversation between two or three agents can be theoretically estimated; 2) the relationship between the convergence speed and the proportion of translators has a power-law-like relation; 3) different agents require different memory sizes, thus a local memory allocation rule is recommended for saving memory resources. The new model and new findings should be useful for further studies of naming games and for better understanding of languages evolution from a dynamical network perspective.

  19. Number names and number understanding

    DEFF Research Database (Denmark)

    Ejersbo, Lisser Rye; Misfeldt, Morten

    2014-01-01

    This paper concerns the results from the first year of a three-year research project involving the relationship between Danish number names and their corresponding digits in the canonical base 10 system. The project aims to develop a system to help the students’ understanding of the base 10 syste...... the Danish number names are more complicated than in other languages. Keywords: A research project in grade 0 and 1th in a Danish school, Base-10 system, two-digit number names, semiotic, cognitive perspectives....

  20. Catalyst for microelectromechanical systems microreactors

    Science.gov (United States)

    Morse, Jeffrey D [Martinez, CA; Sopchak, David A [Livermore, CA; Upadhye, Ravindra S [Pleasanton, CA; Reynolds, John G [San Ramon, CA; Satcher, Joseph H [Patterson, CA; Gash, Alex E [Brentwood, CA

    2010-06-29

    A microreactor comprising a silicon wafer, a multiplicity of microchannels in the silicon wafer, and a catalyst coating the microchannels. In one embodiment the catalyst coating the microchannels comprises a nanostructured material. In another embodiment the catalyst coating the microchannels comprises an aerogel. In another embodiment the catalyst coating the microchannels comprises a solgel. In another embodiment the catalyst coating the microchannels comprises carbon nanotubes.

  1. Epoxidation catalyst and process

    Science.gov (United States)

    Linic, Suljo; Christopher, Phillip

    2010-10-26

    Disclosed herein is a catalytic method of converting alkenes to epoxides. This method generally includes reacting alkenes with oxygen in the presence of a specific silver catalyst under conditions suitable to produce a yield of the epoxides. The specific silver catalyst is a silver nanocrystal having a plurality of surface planes, a substantial portion of which is defined by Miller indices of (100). The reaction is performed by charging a suitable reactor with this silver catalyst and then feeding the reactants to the reactor under conditions to carry out the reaction. The reaction may be performed in batch, or as a continuous process that employs a recycle of any unreacted alkenes. The specific silver catalyst has unexpectedly high selectivity for epoxide products. Consequently, this general method (and its various embodiments) will result in extraordinarily high epoxide yields heretofore unattainable.

  2. Asteroid named after CAS scientist

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ An asteroid has been named after CAS astronomy historian XI Zezong with the approval of the International Minor Planet Nomenclature Committee (IMPNC), announced China's National Astronomical Observatories at CAS (NAOC) on 17 August.

  3. Dictionary of Minor Planet Names

    CERN Document Server

    Schmadel, Lutz D

    2007-01-01

    Dictionary of Minor Planet Names, Fifth Edition, is the official reference for the field of the IAU, which serves as the internationally recognised authority for assigning designations to celestial bodies and any surface features on them. The accelerating rate of the discovery of minor planets has not only made a new edition of this established compendium necessary but has also significantly altered its scope: this thoroughly revised edition concentrates on the approximately 10,000 minor planets that carry a name. It provides authoritative information about the basis for all names of minor planets. In addition to being of practical value for identification purposes, this collection provides a most interesting historical insight into the work of those astronomers who over two centuries vested their affinities in a rich and colorful variety of ingenious names, from heavenly goddesses to more prosaic constructions. The fifth edition serves as the primary reference, with plans for complementary booklets with newl...

  4. Elemental Etymology: What's in a Name?

    Science.gov (United States)

    Ball, David W.

    1985-01-01

    Examines the origin of the names (or etymologies) of the chemical elements. Includes tables listing elements: (1) with names of obscure origin; (2) named for colors; (3) named after real or mythical people; (4) named after places; (5) named after heavenly bodies; and (6) having names of miscellaneous origin. (JN)

  5. Naming analog clocks conceptually facilitates naming digital clocks

    NARCIS (Netherlands)

    Meeuwissen, M.H.W.; Roelofs, A.P.A.; Levelt, W.J.M.

    2004-01-01

    Naming digital clocks (e.g., 2:45, say "quarter to three") requires conceptual operations on the minute and hour information displayed in the input for producing the correct relative time expression. The interplay of these conceptual operations was investigated using a repetition priming paradigm.

  6. Design criteria for stable Pt/C fuel cell catalysts

    Directory of Open Access Journals (Sweden)

    Josef C. Meier

    2014-01-01

    Full Text Available Platinum and Pt alloy nanoparticles supported on carbon are the state of the art electrocatalysts in proton exchange membrane fuel cells. To develop a better understanding on how material design can influence the degradation processes on the nanoscale, three specific Pt/C catalysts with different structural characteristics were investigated in depth: a conventional Pt/Vulcan catalyst with a particle size of 3–4 nm and two Pt@HGS catalysts with different particle size, 1–2 nm and 3–4 nm. Specifically, Pt@HGS corresponds to platinum nanoparticles incorporated and confined within the pore structure of the nanostructured carbon support, i.e., hollow graphitic spheres (HGS. All three materials are characterized by the same platinum loading, so that the differences in their performance can be correlated to the structural characteristics of each material. The comparison of the activity and stability behavior of the three catalysts, as obtained from thin film rotating disk electrode measurements and identical location electron microscopy, is also extended to commercial materials and used as a basis for a discussion of general fuel cell catalyst design principles. Namely, the effects of particle size, inter-particle distance, certain support characteristics and thermal treatment on the catalyst performance and in particular the catalyst stability are evaluated. Based on our results, a set of design criteria for more stable and active Pt/C and Pt-alloy/C materials is suggested.

  7. Moving eyes and naming objects

    NARCIS (Netherlands)

    Meulen, F.F. van der

    2001-01-01

    The coordination between eye movements and speech was examined while speakers were naming objects. Earlier research has shown that eye movements reflect on the underlying visual attention. Also, eye movements were found to reflect upon not only the visual and conceptual processing of an object, but

  8. Can You Say My Name?

    DEFF Research Database (Denmark)

    Erz, Antonia; Christensen, Bo T.

    affect their judgments of people and objects. We extend this research by investigating the effect of phonological fluency on recognition and recall of novel non-word brand names in three laboratory experiments. The results provide us with a more fine-grained idea of fluency effects on memory of non...

  9. African names for American plants

    NARCIS (Netherlands)

    Andel, van T.R.

    2015-01-01

    African slaves brought plant knowledge to the New World, sometimes applying it to related plants they found there and sometimes bringing Old World plants with them. By tracing the linguistic parallels between names for plants in African languages and in communities descended from African slaves,

  10. Academy named after newsreader's wife.

    Science.gov (United States)

    2010-06-24

    AN ADMIRAL nurse academy named in honour of Bonnie Suchet, the wife of former newsreader John Suchet, has opened. The 'virtual' academy, set up by charity dementia UK, Canterbury Christ Church University and the Avante Partnership, will provide continuing professional development and a networking environment for n nurses through its website. Ms Suchet has Alzheimer's disease and is in a care home.

  11. Niobium, catalyst repair kit

    International Nuclear Information System (INIS)

    Tanabe, K.

    1991-01-01

    This paper reports that niobium oxides, when small amounts are added to known catalysts, enhance catalytic activity and selectivity and prolong catalyst life. Moreover, niobium oxides exhibit a pronounced effect as supports of metal or metal oxide catalysts. Recently we found that the surface acidity of hydrated niobium pentoxide, niobic acid (Nb 2 O 5 · nH 2 O), corresponds to the acidity of 70% sulfuric acid and exhibits high catalytic activity, selectivity, and stability for acid-catalyzed reactions in which water molecules participate. Although there are few differences in electronegativity and ionic radius between niobium and its neighbors in the periodic table, it is interesting that the promoter effect, support effect, and acidic nature of niobium compounds are quite different from those of compounds of the surrounding elements. Here we review what's known of niobium compounds from the viewpoint of their pronounced catalytic behavior

  12. Naming names: the first women taxonomists in mycology

    Directory of Open Access Journals (Sweden)

    Sara Maroske

    2018-03-01

    Full Text Available The transition from amateur to professional in natural history is generally regarded as having taken place in the nineteenth century, but landmark events such as the 1917 appointment of mycologist Johanna Westerdijk (1883–1961 as the first female professor in the Netherlands indicate that the pattern of change for women was more varied and delayed than for men. We investigate this transition in mycology, and identify only 43 women in the Western World who published scientific mycological literature pre-1900, of whom twelve published new fungal taxa. By charting the emergence of these women over time, and comparing the output of self-taught amateurs and university graduates, we establish the key role of access to higher education in female participation in mycology. Using a suite of strategies, six of the self-taught amateurs managed to overcome their educational disadvantages and name names — Catharina Dörrien (the first to name a fungal taxon, Marie-Anne Libert, Mary Elizabeth Banning, Élise-Caroline Bommer, Mariette Rousseau, and Annie Lorrain Smith. By 1900, the professional era for women in mycology was underway, and increasing numbers published new taxa. Parity with male colleagues in recognition and promotion, however, remains an ongoing issue. Key words: Amateurs, Fungi, Gender studies, History of science, Plant pathology

  13. Dynamics of Catalyst Nanoparticles

    DEFF Research Database (Denmark)

    Hansen, Thomas Willum; Cavalca, Filippo; Wagner, Jakob Birkedal

    and pharmaceuticals, and the cleanup of exhaust from automobiles and stationary power plants. Sintering, or thermal deactivation, is an important mechanism for the loss of catalyst activity. In order to initiate a systematic study of the dynamics and sintering of nanoparticles, various catalytic systems have been...... under gas exposure, dynamic phenomena such as sintering and growth can be observed with sub-Ångstrøm resolution. Metal nanoparticles contain the active sites in heterogeneous catalysts, which are important for many industrial applications including the production of clean fuels, chemicals...

  14. Fuel cell catalyst degradation

    DEFF Research Database (Denmark)

    Arenz, Matthias; Zana, Alessandro

    2016-01-01

    Fuel cells are an important piece in our quest for a sustainable energy supply. Although there are several different types of fuel cells, the by far most popular is the proton exchange membrane fuel cell (PEMFC). Among its many favorable properties are a short start up time and a high power density...... increasing focus. Activity of the catalyst is important, but stability is essential. In the presented perspective paper, we review recent efforts to investigate fuel cell catalysts ex-situ in electrochemical half-cell measurements. Due to the amount of different studies, this review has no intention to give...

  15. Deactivation-resistant catalyst for selective catalyst reduction of NOx

    DEFF Research Database (Denmark)

    2011-01-01

    The present invention relates to a catalyst for selective catalytic reduction of NOx in alkali metal containing flue gas using ammonia as reductant, the catalyst comprising a surface with catalytically active sites, wherein the surface is at least partly coated with a coating comprising at least...... one metal oxide. In another aspect the present invention relates to the use of said catalyst and to a method of producing said catalyst. In addition, the present invention relates to a method of treating an catalyst for conferring thereon an improved resistance to alkali poisoning....

  16. Zefinha - the name of abandonment.

    Science.gov (United States)

    Diniz, Debora

    2015-09-01

    Zefinha has been living in a forensic hospital for the last 39 years. She is the longest female inhabitant surviving under compulsory psychiatric treatment in Brazil. This paper discusses how the ethical rule of anonymity might be revised in research concerning a unique case involving severe violations of human rights. My argument is that there are cases in which disclosing the names of research participants protects their interests and rights.

  17. Hydrogen evolution reaction catalyst

    Science.gov (United States)

    Subbaraman, Ram; Stamenkovic, Vojislav; Markovic, Nenad; Tripkovic, Dusan

    2016-02-09

    Systems and methods for a hydrogen evolution reaction catalyst are provided. Electrode material includes a plurality of clusters. The electrode exhibits bifunctionality with respect to the hydrogen evolution reaction. The electrode with clusters exhibits improved performance with respect to the intrinsic material of the electrode absent the clusters.

  18. Heterogeneous chromium catalysts

    NARCIS (Netherlands)

    2005-01-01

    The present invention relates to a heterogeneous chromium catalyst system for the polymerisation of ethylene and/or alpha olefins prepared by the steps of: (a) providing a silica-containing support, (b) treating the silica-containing support with a chromium compound to form a chromium-based

  19. Sabatier Catalyst Poisoning Investigation

    Science.gov (United States)

    Nallette, Tim; Perry, Jay; Abney, Morgan; Knox, Jim; Goldblatt, Loel

    2013-01-01

    The Carbon Dioxide Reduction Assembly (CRA) on the International Space Station (ISS) has been operational since 2010. The CRA uses a Sabatier reactor to produce water and methane by reaction of the metabolic CO2 scrubbed from the cabin air and the hydrogen byproduct from the water electrolysis system used for metabolic oxygen generation. Incorporating the CRA into the overall air revitalization system has facilitated life support system loop closure on the ISS reducing resupply logistics and thereby enhancing longer term missions. The CRA utilizes CO2 which has been adsorbed in a 5A molecular sieve within the Carbon Dioxide Removal Assembly, CDRA. There is a potential of compounds with molecular dimensions similar to, or less than CO2 to also be adsorbed. In this fashion trace contaminants may be concentrated within the CDRA and subsequently desorbed with the CO2 to the CRA. Currently, there is no provision to remove contaminants prior to entering the Sabatier catalyst bed. The risk associated with this is potential catalyst degradation due to trace organic contaminants in the CRA carbon dioxide feed acting as catalyst poisons. To better understand this risk, United Technologies Aerospace System (UTAS) has teamed with MSFC to investigate the impact of various trace contaminants on the CRA catalyst performance at relative ISS cabin air concentrations and at about 200/400 times of ISS concentrations, representative of the potential concentrating effect of the CDRA molecular sieve. This paper summarizes our initial assessment results.

  20. Catalysts for Environmental Remediation

    DEFF Research Database (Denmark)

    Abrams, B. L.; Vesborg, Peter Christian Kjærgaard

    2013-01-01

    The properties of catalysts used in environmental remediation are described here through specific examples in heterogeneous catalysis and photocatalysis. In the area of heterogeneous catalysis, selective catalytic reduction (SCR) of NOx was used as an example reaction with vanadia and tungsta...

  1. Sustainable Utility of Magnetically Recyclable Nano-Catalysts in Water: Applications in Organic Synthesis

    Directory of Open Access Journals (Sweden)

    Manoj B. Gawande

    2013-10-01

    Full Text Available Magnetically recyclable nano-catalysts and their use in aqueous media is a perfect combination for the development of greener sustainable methodologies in organic synthesis. It is well established that magnetically separable nano-catalysts avoid waste of catalysts or reagents and it is possible to recover >95% of catalysts, which is again recyclable for subsequent use. Water is the ideal medium to perform the chemical reactions with magnetically recyclable nano-catalysts, as this combination adds tremendous value to the overall benign reaction process development. In this review, we highlight recent developments inthe use of water and magnetically recyclable nano-catalysts (W-MRNs for a variety of organic reactions namely hydrogenation, condensation, oxidation, and Suzuki–Miyaura cross-coupling reactions, among others.

  2. Catalyst support structure, catalyst including the structure, reactor including a catalyst, and methods of forming same

    Science.gov (United States)

    Van Norman, Staci A.; Aston, Victoria J.; Weimer, Alan W.

    2017-05-09

    Structures, catalysts, and reactors suitable for use for a variety of applications, including gas-to-liquid and coal-to-liquid processes and methods of forming the structures, catalysts, and reactors are disclosed. The catalyst material can be deposited onto an inner wall of a microtubular reactor and/or onto porous tungsten support structures using atomic layer deposition techniques.

  3. 27 CFR 5.34 - Brand names.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Brand names. 5.34 Section... Spirits § 5.34 Brand names. (a) Misleading brand names. No label shall contain any brand name, which... officer finds that such brand name (when appropriately qualified if required) conveys no erroneous...

  4. 27 CFR 7.23 - Brand names.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Brand names. 7.23 Section... Beverages § 7.23 Brand names. (a) General. The product shall bear a brand name, except that if not sold under a brand name, then the name of the person required to appear on the brand label shall be deemed a...

  5. Catalysts for synthetic liquid fuels

    Energy Technology Data Exchange (ETDEWEB)

    Bruce, L.A.; Turney, T.W.

    1987-12-01

    Fischer-Tropsch catalysts have been designed, characterized and tested for the selective production of hydrocarbons suitable as synthetic liquid transport fuels from synthesis gas (i.e., by the reduction of carbon monoxide with hydrogen). It was found that hydrocarbons in the middle distillate range, or suitable for conversion to that range, could be produced over several of the new catalyst systems. The various catalysts examined included: (1) synthetic cobalt clays, mainly cobalt chlorites; (2) cobalt hydrotalcites; (3) ruthenium metal supported on rare earth oxides of high surface area; and (4) a novel promoted cobalt catalyst. Active and selective catalysts have been obtained, in each category. With the exception of the clays, reproducibility of catalyst performance has been good. Catalysts in groups 2 and 4 have exhibited very high activity, with long lifetimes and easy regeneration.

  6. In the Name of Love

    DEFF Research Database (Denmark)

    Bojesen, Anders; Muhr, Sara Louise

    Accepted Abstract: Most current Human Resource Management discourse stresses coaching, developing and empowering in order to do ‘good' and care for the ‘well-being' of the employees (Steyaert & Janssens, 1999). Legge (1999) symbolizes HRM discourse by the employee being a family member subordinated...... for mankind - in the name of care for the other", and Zizek (2003:23) in a similar matter when he points out that "the ultimate source of evil is compassion itself". Butler (2005) refers to ethical violence when she describes the rigid ethical standards set out to be what Kaulingfreks calls the ‘keeper...

  7. Endurance testing of a WDS catalyst

    International Nuclear Information System (INIS)

    Vladu, Mihaela; Brad, Sebastian; Vijulie, Mihai; Vasut, Felicia; Constantin, Marin

    2007-01-01

    the Pt high efficiency and due to the possibility of hydrophobization. During experiments carried out within this project, the Pt/C/PTFE catalyst used was manufactured from a mixture of Pt/C and Teflon, dyed onto cylindrical shape catalyst of sizes F = 2,5 mm, L = 15 mm and subsequently sintered to improve the mechanical stability. The sintering process was done into a glass equipment at 355-360 deg. C for maximum 10 min. All the experimental parameters will be acquired with a Field-Point acquisition system and the data will be modeled with the LabVIEW software. The results obtained and presented in this paper are part of project more extended. Until now the first objectives were attained, namely, designing and building of the experimental facility and manufacturing of the catalyst that will be used for endurance determinations. (authors)

  8. Vibration measurements of automobile catalyst

    Science.gov (United States)

    Aatola, Seppo

    1994-09-01

    Vibration of catalyst cell, which is inside the casing of the catalyst, is difficult to measure with usual measuring instrumentation. When catalyst is in use, there is hot exhaust gas flow though the catalyst cell and temperature of the cell is approximately +900 degree(s)C. Therefore non-contact Laser- Doppler-Vibrometer was used to measure vibration velocity of the catalyst cell. The laser beam was directed towards the cell through pipe which was put through and welded to the casing of the catalyst. The outer end of the pipe was screw down with a tempered class to prevent exhaust gas flow from the pipe. The inner end of the pipe was open and few millimeters away from the measuring point. Catalyst was attached to the engine with two ways, rigidly close to the engine and flexible under the engine. The engine was running in test bench under controlled conditions. Vibration measurements were carried out during constant running speeds of the engine. Vibration signals were captured and analyzed with FFT-analyzer. Vibration of catalyst cell was strongest at running speed of 5000 rpm, from 10 to 20 g (1 g equals 9.81 ms-2), when catalyst was attached rigidly close to the engine. At running speed of 3000 rpm, vibration of catalyst cell was from 2 to 3 g in most cases, when catalyst was attached either rigidly or flexible to the engine. It is estimated that in real life, i.e. when catalyst is attached to car with same engine, vibration of catalyst cell at running speed of 5000 rpm is somewhere between 1 and 10 g. At running speed of 3000 rpm, which may be more often used when driving car (car speed approximately 100 kmh-1), vibration of catalyst cell is probably few g's.

  9. Synthesis of palm biodiesel using sodium methoxide catalyst

    International Nuclear Information System (INIS)

    Azhari; Robiah Yunus; Rasyid, S.A.; Abdullah, L.C.

    2006-01-01

    Synthesis of palm biodiesel (methyl ester) was successfully carried out from refined bleached deodorized palm oil (RBDPO) by transesterification reaction. Two kinds of alkali catalyst were selected for this reaction namely sodium hydroxide (NaOH) and sodium methoxide (NaOCH 3 ), and the effects of operating variables such as molar ratio, reaction temperature and quantity of catalyst were also investigated. The reaction was carried out under atmosphere pressure. The reaction temperature and time were varied between 55 to 70 degree C and 50 to 90 minutes respectively. The methanol to oil molar ratios were also varied at 6:1, 5:1, 4:1 and 3:1 to examine its effect on reaction yield. The reaction conversion was 99% by use of NaOCH 3 as a catalyst. However, with NaOH as catalyst, the conversion was slightly lower compared to using NaOCH 3 . The optimum conditions for NaOCH 3 as catalyst were reaction temperature, 65 degree C; reaction time, 60 minutes; molar ratio, 6:1; and catalyst amount, 1.0% w/w. The kinetics study on transesterification of RBDPO with methanol established that the reaction occurred via two stepwise and irreversible elementary reactions following second order model. A vacuum distillation process was used to reduce the pour point of palm biodiesel. The lowest pour point attainable for palm biodiesel was at 3 degree C. (Author)

  10. A Catalyst for Change

    DEFF Research Database (Denmark)

    Lønsmann, Dorte

    2017-01-01

    This case study of a team in an international workplace investigates processes of language socialization in a transient multilingual setting. Using interview and observational data, the analysis shows how social and linguistic norms are negotiated, with the newcomer positioned as a catalyst...... for changing language practices toward more English, with the ultimate aim of creating a 'global mindset' in the organization. Language socialization in a transient multilingual setting is shown to focus on and assign positive value to new linguistic norms that experienced members are socialized...... into in a process that hinges on new members functioning as tools for management to bring about the desired change. The article shows that while the newcomer is used as a catalyst for increased use of English and for the creation of a 'global mindset,' she is at the same time socialized into the existing Danish...

  11. Photo catalyst; Ko shokubai

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    While titanium oxide is excited by the light, electrons of titanium oxide are taken away by the light energy to form positive holes. Water will be decomposed into hydrogen ion and hydroxy radical (OH) by these positive holes. This hydroxy radical is a strong reactive substance called active oxygen, it decomposes organisms. Besides this photo- catalyst function, the titanium oxide can also make surface of a substance superhydrophilic. The super hydrophilicity results in not forming water drops on the glass surface but spreading all over the surface to prevent a covering of fog on the glass surface. The published patents concerning the photo catalysts were 593 from Jan. 1998 to Jan. 1999. The applicant order is the first TOTO 143, the second Daikin Industry 19, the third Toshiba Raitech, Nitto Denko, Hitachi 17 respectively. (NEDO)

  12. High-Activity Dealloyed Catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Kongkanand, Anusorn [General Motors LLC, Pontiac, MI (United States)

    2014-09-30

    Reduction of costly Pt usage in proton exchange membrane fuel cell electrodes is one of the major challenges towards development and commercialization of fuel cell vehicles. Although few have met the initial-kinetic activity requirements in a realistic fuel cell device, no catalyst material has ever met the demanding fuel cell durability targets set by DOE. In this project, a team of 4 universities and 2 companies came together to investigate a concept that appeared promising in preliminary non-fuel cell tests then to further develop the catalyst to a mature level ready for vehicle implementation. The team consists of academia with technical leadership in their respective areas, a catalyst supplier, and a fuel cell system integrator.The tightly collaborative project enabled development of a highly active and durable catalyst with performance that significantly exceeds that of previous catalysts and meets the DOE targets for the first time (Figure 1A). The catalyst was then further evaluated in full-active-area stack in a realistic vehicle operating condition (Figure 1B). This is the first public demonstration that one can realize the performance benefit and Pt cost reduction over a conventional pure Pt catalyst in a long-term realistic PEMFC system. Furthermore, systematic analyses of a range of catalysts with different performance after fuel cell testing allowed for correlation between catalyst microstructure and its electrocatalytic activity and durability. This will in turn aid future catalyst development.

  13. Non-PGM cell catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Colon-Mercado, H. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Elvington, M. [Savannah River Consulting, Aiken, SC (United States); Ganesan, P. [Savannah River Consulting, Aiken, SC (United States)

    2017-09-27

    A unique approach has been developed to probe the non-PGM catalyst active site for the Oxygen Reduction Reaction (ORR) for PEMFCs. Iron based functionalities have been engineered into a variety of catalysts to evaluate their impact on activity for the ORR. A series of high surface area catalysts were synthesized and the impact of the chemical structure on the electrochemical and electrocatalytic properties was investigated. Elemental and surface analyses of the prepared catalysts reveal the incorporation of iron in a targeted and controlled manner. A high surface area framework catalyst was prepared that shows exceptional activity, comparable to state-of-the-art materials. The results of this research project provided critical seed data for the newly awarded ElectroCat project, which focuses on rationally designed framework catalysts for the oxygen reduction reaction.

  14. 27 CFR 4.33 - Brand names.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Brand names. 4.33 Section... THE TREASURY LIQUORS LABELING AND ADVERTISING OF WINE Labeling Requirements for Wine § 4.33 Brand names. (a) General. The product shall bear a brand name, except that if not sold under a brand name...

  15. Name fashion dynamics and social class

    NARCIS (Netherlands)

    Bloothooft, G.; Schraagen, M.P.

    2011-01-01

    Modern parents in The Netherlands choose the first names they like for their children. In this decision most follow fashion and as a typical property of fashion, many popular names now have a life cycle of only one generation. Some names show a symmetry between rise and fall of the name, but most

  16. A radiographic anthology of vertebral names

    International Nuclear Information System (INIS)

    Yochum, T.R.; Hartley, B.; Thomas, D.P.; Guebert, G.M.

    1987-01-01

    A total of 88 such named vertebrae have been extracted from the literature. With so many names from scattered sources, the authors collated them in a single presentation. A description is given and the anatomical and pathogenic reasons for the appearances are considered. A list of conditions associated with each named vertebra accompanies the descriptive paragraph. The named vertebrae are presented in alphabetical order

  17. Oxygen-reducing catalyst layer

    Science.gov (United States)

    O'Brien, Dennis P [Maplewood, MN; Schmoeckel, Alison K [Stillwater, MN; Vernstrom, George D [Cottage Grove, MN; Atanasoski, Radoslav [Edina, MN; Wood, Thomas E [Stillwater, MN; Yang, Ruizhi [Halifax, CA; Easton, E Bradley [Halifax, CA; Dahn, Jeffrey R [Hubley, CA; O'Neill, David G [Lake Elmo, MN

    2011-03-22

    An oxygen-reducing catalyst layer, and a method of making the oxygen-reducing catalyst layer, where the oxygen-reducing catalyst layer includes a catalytic material film disposed on a substrate with the use of physical vapor deposition and thermal treatment. The catalytic material film includes a transition metal that is substantially free of platinum. At least one of the physical vapor deposition and the thermal treatment is performed in a processing environment comprising a nitrogen-containing gas.

  18. Catalyst systems and uses thereof

    Science.gov (United States)

    Ozkan, Umit S [Worthington, OH; Holmgreen, Erik M [Columbus, OH; Yung, Matthew M [Columbus, OH

    2012-07-24

    A method of carbon monoxide (CO) removal comprises providing an oxidation catalyst comprising cobalt supported on an inorganic oxide. The method further comprises feeding a gaseous stream comprising CO, and oxygen (O.sub.2) to the catalyst system, and removing CO from the gaseous stream by oxidizing the CO to carbon dioxide (CO.sub.2) in the presence of the oxidation catalyst at a temperature between about 20 to about 200.degree. C.

  19. Development of GREET Catalyst Module

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Zhichao [Argonne National Lab. (ANL), Argonne, IL (United States); Benavides, Pahola T. [Argonne National Lab. (ANL), Argonne, IL (United States); Dunn, Jennifer B. [Argonne National Lab. (ANL), Argonne, IL (United States); Cronauer, Donald C. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-09-01

    In this report, we develop energy and material flows for the production of five different catalysts (tar reforming, alcohol synthesis, Zeolite Socony Mobil-5 [ZSM-5], Mo/Co/ γ-Al2O3, and Pt/ γ-Al2O3) and two chemicals (olivine, dimethyl ether of polyethylene glycol [DEPG]). These compounds and catalysts are now included in the Greenhouse Gases, Regulated Emissions and Energy Use in Transportation (GREET™) catalyst module.

  20. Feeling-of-knowing for proper names.

    Science.gov (United States)

    Izaute, Marie; Chambres, Patrick; Larochelle, Serge

    2002-12-01

    The main objective of the presented study was to study feeling-of-knowing (FOK) in proper name retrieval. Many studies show that FOK can predict performance on a subsequent criterion test. Although feeling-of-knowing studies involve questions about proper names, none make this distinction between proper names and common names. Nevertheless, the specific character of proper names as a unique label referring to a person should allow participants to target precisely the desired verbal label. Our idea here was that the unique character of proper name information should result in more accurate FOK evaluations. In the experiment, participants evaluated feeling-of-knowing for proper and common name descriptions. The study demonstrates that FOK judgments are more accurate for proper names than for common names. The implications of the findings for proper names are briefly discussed in terms of feeling-of-knowing hypotheses.

  1. Reduction of Nitrogen Oxides using zeolite catalysts exchanged with cobalt

    International Nuclear Information System (INIS)

    Garcia M, E.A.; Bustamante L, F.; Montes de C, C.

    1999-01-01

    The Selective Catalytic Reduction (SCR) of NOx by methane in excess oxygen was studied over several zeolite catalysts; namely cobalt loaded mordenite, ferrierite, SM-5 and the corresponding acid forms. When NO2 predominated n the NOx mixture the acid forms showed the highest N2 formation rates under dry conditions. Mordenite supported catalysts were the most active ones followed by ferrierite and ZSM-5. The most active Co-Mordenite catalyst was tested using a NOx mixture, containing mostly NO, under dry conditions and in the presence of water and SO2. The addition of 8 % water to the reaction mixture lead to a reversible deactivation, mainly at low temperatures. When the reaction mixture contained 60 ppm SO2, the N2 formation rate decreased about a half likely due to SO2 poisoning

  2. Reuse of Hydrotreating Spent Catalyst

    International Nuclear Information System (INIS)

    Habib, A.M.; Menoufy, M.F.; Amhed, S.H.

    2004-01-01

    All hydro treating catalysts used in petroleum refining processes gradually lose activity through coking, poisoning by metal, sulfur or halides or lose surface area from sintering at high process temperatures. Waste hydrotreating catalyst, which have been used in re-refining of waste lube oil at Alexandria Petroleum Company (after 5 years lifetime) compared with the same fresh catalyst were used in the present work. Studies are conducted on partial extraction of the active metals of spent catalyst (Mo and Ni) using three leaching solvents,4% oxidized oxalic acid, 10% aqueous sodium hydroxide and 10% citric acid. The leaching experiments are conducting on the de coked extrude [un crushed] spent catalyst samples. These steps are carried out in order to rejuvenate the spent catalyst to be reused in other reactions. The results indicated that 4% oxidized oxalic acid leaching solution gave total metal removal 45.6 for de coked catalyst samples while NaOH gave 35% and citric acid gave 31.9 % The oxidized leaching agent was the most efficient leaching solvent to facilitate the metal removal, and the rejuvenated catalyst was characterized by the unchanged crystalline phase The rejuvenated catalyst was applied for hydrodesulfurization (HDS) of vacuum gas oil as a feedstock, under different hydrogen pressure 20-80 bar in order to compare its HDS activity

  3. Novel Reforming Catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Pfefferle, Lisa D; Haller, Gary L

    2012-10-16

    Aqueous phase reforming is useful for processing oxygenated hydrocarbons to hydrogen and other more useful products. Current processing is hampered by the fact that oxide based catalysts are not stable under high temperature hydrothermal conditions. Silica in the form of structured MCM-41 is thermally a more stable support for Co and Ni than conventional high surface area amorphous silica but hydrothermal stability is not demonstrated. Carbon nanotube supports, in contrast, are highly stable under hydrothermal reaction conditions. In this project we show that carbon nanotubes are stable high activity/selectivity supports for the conversion of ethylene glycol to hydrogen.

  4. Catalysts for petroleum desulfurization

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, A.; Diemann, E.; Baumann, F.W.

    1988-01-01

    In order to obtain marketable products from low-quality oils, efficient hydrogenation processes are required for removing sulfur (hydrodesulfurization, HDS), nitrogen (hydrodenitrification, HDN), and oxygen (hydrodeoxygenation, HDO), which would poison the noble metal catalysts of the downstream petrochemical processes. Hydrogenation will produce low-sulfur, low-nitrogen fuels and thus contribute to the reduction of SO/sub 2/ and NO/sub x/ emissions which is long overdue from the ecological point of view (forest decline, acidification of surface bodies of water, etc.).

  5. Medieval Karelian Calendar Names: A Cognitive Perspective

    Directory of Open Access Journals (Sweden)

    Irina A. Kyurshunova

    2013-11-01

    Full Text Available The article focuses on calendar personal names recorded in the 15–17th centuries Russian and Swedish manuscripts written in Karelia. Revealing the cognitive potential of this historical stratum of names, the author analyzes the frequency of full (official and modified forms of calendar names, the regional peculiarities of their linguistic adaptation, their ethnolinguisitic and social status, as well as the functioning of calendar names in the regional onomastic system. The analysis shows that the calendar onomasticon holds the leading positions, which reflects important axiological and mental shifts in the people’s culture. The list of most frequent Christian names of the region generally coincides with the onomastic data related to other Russian territories of the same period. The conservation of the name nomenclature is due to family traditions, namely, to familial practices of naming. However, the adaptation and distribution of names display some regional features, particularly in the frequency of different groups of anthroponyms. The peripheral situation of the region and the presence of Balto-Fennic population which adapted the Russian calendar athroponymicon determined the “conservatism” of the calendar names nomenclature: for naming, they selected the names which were better adapted and more extensively used among Russians. The formation of modified names depended mostly on the morphemic structure of the Russian language, regional features being relatively insignificant. The frequency of modified forms of names correlates with the genre of the manuscript and the scribe’s arbitrariness.

  6. In-situ characterization of heterogeneous catalysts

    CERN Document Server

    Rodriguez, Jose A; Chupas, Peter J

    2013-01-01

    Helps researchers develop new catalysts for sustainable fuel and chemical production Reviewing the latest developments in the field, this book explores the in-situ characterization of heterogeneous catalysts, enabling readers to take full advantage of the sophisticated techniques used to study heterogeneous catalysts and reaction mechanisms. In using these techniques, readers can learn to improve the selectivity and the performance of catalysts and how to prepare catalysts as efficiently as possible, with minimum waste. In-situ Characterization of Heterogeneous Catalysts feat

  7. Activating catalysts with mechanical force

    NARCIS (Netherlands)

    Piermattei, A.; Karthikeyan, S.; Sijbesma, R.P.

    2009-01-01

    Homogeneously catalysed reactions can be ‘switched on’ by activating latent catalysts. Usually, activation is brought about by heat or an external chemical agent. However, activation of homogeneous catalysts with a mechanical trigger has not been demonstrated. Here, we introduce a general method to

  8. Principal component analysis of NEXAFS spectra for molybdenum speciation in hydrotreating catalysts

    International Nuclear Information System (INIS)

    Faro Junior, Arnaldo da C.; Rodrigues, Victor de O.; Eon, Jean-G.; Rocha, Angela S.

    2010-01-01

    Bulk and supported molybdenum based catalysts, modified by nickel, phosphorous or tungsten were studied by NEXAFS spectroscopy at the Mo L III and L II edges. The techniques of principal component analysis (PCA) together with a linear combination analysis (LCA) allowed the detection and quantification of molybdenum atoms in two different coordination states in the oxide form of the catalysts, namely tetrahedral and octahedral coordination. (author)

  9. Graphene Nanowalls as Ingenious Material for Catalysts and Superconductors

    Science.gov (United States)

    2011-03-12

    whole transferred graphene films by using ECOPIA Hall measurement system HMS-3000 with silver paint used as electrodes at the four corners of graphene ...introduced for 15 min during growth stage. On the right: (a) A picture of the transferred graphene on SiO2/Si wafer with silver paint as electrodes at...Final Report for AOARD Grant 104057 “ Graphene Nanowalls as Ingenious Material for Catalysts and Superconductors” March 12, 2011 Name of

  10. SOCIOLINGUISTIC IMPORT OF NAME-CLIPPING AMONG ...

    African Journals Online (AJOL)

    NGOZI

    2013-02-27

    Feb 27, 2013 ... experiences which, most of the times, encompass cultural and philosophical ... The art of name clipping goes way back in language history ... describes Akan names as “iconic representation of complete social variables that ...

  11. Naming game with learning errors in communications

    OpenAIRE

    Lou, Yang; Chen, Guanrong

    2014-01-01

    Naming game simulates the process of naming an objective by a population of agents organized in a certain communication network topology. By pair-wise iterative interactions, the population reaches a consensus state asymptotically. In this paper, we study naming game with communication errors during pair-wise conversations, where errors are represented by error rates in a uniform probability distribution. First, a model of naming game with learning errors in communications (NGLE) is proposed....

  12. 27 CFR 19.165 - Trade names.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Trade names. 19.165 Section 19.165 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT... Trade names. (a) Operating permits. Where a trade name is to be used in connection with the operations...

  13. Once more the generic name Passerina Vieillot

    NARCIS (Netherlands)

    Oort, van E.D.

    1910-01-01

    The note on the generic name of the Snow-bunting by Dr. E. Hartert in this part of our periodical gives me cause to revert to the subject of my note on the generic name Passerina Vieillot and to state here, that I stand to what I have said about the rejection of this name in Zoology (Notes Leyden

  14. Towards proper name generation : A corpus analysis

    NARCIS (Netherlands)

    Castro Ferreira, Thiago; Wubben, Sander; Krahmer, Emiel

    We introduce a corpus for the study of proper name generation. The corpus consists of proper name references to people in webpages, extracted from the Wikilinks corpus. In our analyses, we aim to identify the different ways, in terms of length and form, in which a proper names are produced

  15. Resolving person names in web people search

    NARCIS (Netherlands)

    Balog, K.; Azzopardi, L.; de Rijke, M.; King, I.; Baeza-Yates, R.

    2009-01-01

    Disambiguating person names in a set of documents (such as a set of web pages returned in response to a person name) is a key task for the presentation of results and the automatic profiling of experts. With largely unstructured documents and an unknown number of people with the same name the

  16. Assigned value improves memory of proper names.

    Science.gov (United States)

    Festini, Sara B; Hartley, Alan A; Tauber, Sarah K; Rhodes, Matthew G

    2013-01-01

    Names are more difficult to remember than other personal information such as occupations. The current research examined the influence of assigned point value on memory and metamemory judgements for names and occupations to determine whether incentive can improve recall of proper names. In Experiment 1 participants studied face-name and face-occupation pairs assigned 1 or 10 points, made judgements of learning, and were given a cued recall test. High-value names were recalled more often than low-value names. However, recall of occupations was not influenced by value. In Experiment 2 meaningless nonwords were used for both names and occupations. The name difficulty disappeared, and value influenced recall of both names and occupations. Thus value similarly influenced names and occupations when meaningfulness was held constant. In Experiment 3 participants were required to use overt rote rehearsal for all items. Value did not boost recall of high-value names, suggesting that differential processing could not be implemented to improve memory. Thus incentives may improve memory for proper names by motivating people to engage in selective rehearsal and effortful elaborative processing.

  17. Color Naming Experiment in Mongolian Language

    Directory of Open Access Journals (Sweden)

    Nandin-Erdene Osorjamaa

    2015-11-01

    Full Text Available There are numerous researches on color terms and names in many languages. In Mongolian language there are few doctoral theses on color naming. Cross cultural studies of color naming have demonstrated Semantic relevance in French and Mongolian color name Gerlee Sh. (2000; Comparisons of color naming across English and Mongolian Uranchimeg B. (2004; Semantic comparison between Russian and Mongolian idioms Enhdelger O. (1996; across symbolism Dulam S. (2007 and few others. Also a few articles on color naming by some Mongolian scholars are Tsevel, Ya. (1947, Baldan, L. (1979, Bazarragchaa, M. (1997 and others. Color naming studies are not sufficiently studied in Modern Mongolian. Our research is considered to be the first intended research on color naming in Modern Mongolian, because it is one part of Ph.D dissertation on color naming. There are two color naming categories in Mongolian, basic color terms and non- basic color terms. There are seven basic color terms in Mongolian. This paper aims to consider how Mongolian color names are derived from basic colors by using psycholinguistics associative experiment. It maintains the students and researchers to acquire the specific understanding of the differences and similarities of color naming in Mongolian and  English languages from the psycho-linguistic aspect.

  18. The Private Legal Governance of Domain Names

    DEFF Research Database (Denmark)

    Schovsbo, Jens Hemmingsen

    2015-01-01

    . the UDRP (WIPO) and the Danish Complaints Board for Internet Domain Names (the Board) to discuss how and to what extent the domain name system balances interests between trademark owners and other users of domain names and secures the rule of law (legal certainty and predictability) with a special focus...

  19. Development of GREET Catalyst Module

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Zhichao [Argonne National Lab. (ANL), Argonne, IL (United States). Energy Systems Division; Dunn, Jennifer B. [Argonne National Lab. (ANL), Argonne, IL (United States). Energy Systems Division; Cronauer, Donald C. [Argonne National Lab. (ANL), Argonne, IL (United States). Energy Systems Division

    2014-09-01

    Catalysts are critical inputs for many pathways that convert biomass into biofuels. Energy consumption and greenhouse gas (GHG) emissions during the production of catalysts and chemical inputs influence the life-cycle energy consumption, and GHG emissions of biofuels and need to be considered in biofuel life-cycle analysis (LCA). In this report, we develop energy and material flows for the production of three different catalysts (tar reforming, alcohol synthesis, Zeolite Socony Mobil-5 [ZSM-5]) and two chemicals (olivine, dimethyl ether of polyethylene glycol [DEPG]). These compounds and catalysts are now included in the Greenhouse Gases, Regulated Emissions and Energy Use in Transportation (GREET™) catalyst module. They were selected because they are consumed in existing U.S. Department of Energy (DOE) analyses of biofuel processes. For example, a thermochemical ethanol production pathway (indirect gasification and mixed alcohol synthesis) developed by the National Renewable Energy Laboratory (NREL) uses olivine, DEPG, and tar reforming and alcohol synthesis catalysts (Dutta et al., 2011). ZSM-5 can be used in biofuel production pathways such as catalytic upgrading of sugars into hydrocarbons (Biddy and Jones, 2013). Other uses for these compounds and catalysts are certainly possible. In this report, we document the data sources and methodology we used to develop material and energy flows for the catalysts and compounds in the GREET catalyst module. In Section 2 we focus on compounds used in the model Dutta et al. (2011) developed. In Section 3, we report material and energy flows associated with ZSM-5 production. Finally, in Section 4, we report results.

  20. Official Naming in Hå, Klepp and Time

    Directory of Open Access Journals (Sweden)

    Inge Særheim

    2012-08-01

    Full Text Available Toponyms localize, reflect and give information about historical traditions and various phenomena in an area. They form part of the local heritage and culture. The relationship between place names, heritage and identity is often underlined in guidelines regarding official naming of streets and roads. In what way is heritage and local identity reflected in the road names of the three municipalities Hå, Klepp and Time (Southwest-Norway, and how is the special character of this area expressed in the names? More than half of the official road names in the three municipalities are either identical with a local toponym, or they consist of a word for ‘road’ and a local toponym (or an appellative describing the location. This shows that there is a strong commitment to base the official naming on local tradition and thus contribute to identity. Quite a few elements from the dialect, e.g. special pronunciation, grammatical forms or local words, appear in the names, especially in the road names from Hå, reflecting that the names are part of the local culture, and due to the fact that the dialect is unique. Consistency is a challenge, however; the same word is sometimes spelled in different ways in different names. It appears that, with some exceptions, cultural heritage and local tradition have been preferred principles and guidelines with regard to naming of roads in the three municipalities, due to a consciousness that heritage and tradition create identity.

  1. Name signs in Danish Sign Language

    DEFF Research Database (Denmark)

    Bakken Jepsen, Julie

    2018-01-01

    in spoken languages, where a person working as a blacksmith by his friends might be referred to as ‘The Blacksmith’ (‘Here comes the Blacksmith!’) instead of using the person’s first name. Name signs are found not only in Danish Sign Language (DSL) but in most, if not all, sign languages studied to date....... This article provides examples of the creativity of the users of Danish Sign Language, including some of the processes in the use of metaphors, visual motivation and influence from Danish when name signs are created.......A name sign is a personal sign assigned to deaf, hearing impaired and hearing persons who enter the deaf community. The mouth action accompanying the sign reproduces all or part of the formal first name that the person has received by baptism or naming. Name signs can be compared to nicknames...

  2. An optimization study of PtSn/C catalysts applied to direct ethanol fuel cell: Effect of the preparation method on the electrocatalytic activity of the catalysts

    Science.gov (United States)

    Almeida, T. S.; Palma, L. M.; Leonello, P. H.; Morais, C.; Kokoh, K. B.; De Andrade, A. R.

    2012-10-01

    The aim of this work was to perform a systematic study of the parameters that can influence the composition, morphology, and catalytic activity of PtSn/C nanoparticles and compare two different methods of nanocatalyst preparation, namely microwave-assisted heating (MW) and thermal decomposition of polymeric precursors (DPP). An investigation of the effects of the reducing and stabilizing agents on the catalytic activity and morphology of Pt75Sn25/C catalysts prepared by microwave-assisted heating was undertaken for optimization purposes. The effect of short-chain alcohols such as ethanol, ethylene glycol, and propylene glycol as reducing agents was evaluated, and the use of sodium acetate and citric acid as stabilizing agents for the MW procedure was examined. Catalysts obtained from propylene glycol displayed higher catalytic activity compared with catalysts prepared in ethylene glycol. Introduction of sodium acetate enhanced the catalytic activity, but this beneficial effect was observed until a critical acetate concentration was reached. Optimization of the MW synthesis allowed for the preparation of highly dispersed catalysts with average sizes lying between 2.0 and 5.0 nm. Comparison of the best catalyst prepared by MW with a catalyst of similar composition prepared by the polymeric precursors method showed that the catalytic activity of the material can be improved when a proper condition for catalyst preparation is achieved.

  3. Deactivation and regeneration of refinery catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Furimsky, E.

    1979-08-01

    A discussion covers the mechanisms of catalyst aging, poisoning, coke deposition, and metals deposition; feedstock pretreatment to extend catalyst life; the effects of operating conditions; the effects of catalyst composition and structure on its stability; nonchemical deactivation processes; and methods of catalyst regeneration, including coke burn-off and solvent extraction.

  4. Increasing the lifetime of fuel cell catalysts

    NARCIS (Netherlands)

    Latsuzbaia, R.

    2015-01-01

    In this thesis, I discuss a novel idea of fuel cell catalyst regeneration to increase lifetime of the PEM fuel cell electrode/catalyst operation and, therefore, reduce the catalyst costs. As many of the catalyst degradation mechanisms are difficult to avoid, the regeneration is alternative option to

  5. Impeded solid state reactions and transformations in ceramic catalysts supports and catalysts

    Directory of Open Access Journals (Sweden)

    Ernő E. Kiss

    2012-12-01

    Full Text Available Impeded chemical reactions and impeded polymorphous transformation in materials are discussed, as desired effects, for stabilization of ceramic catalyst supports and ceramic based catalysts. This paper gives a short overview about the possibilities of slowing down the aging processes in ceramic catalyst supports and catalysts. Special attention is given to alumina and titania based catalysts.

  6. On the History of the Name Ruslan

    Directory of Open Access Journals (Sweden)

    Roza Yu. Namitokova

    2016-12-01

    Full Text Available The authors postulate that there exists a common stock of Russian personal names resulting from a partial blending of national anthroponymicons. The main part of the paper focuses on the history of the personal name Ruslan which has etymological ties with the widespread Turkic name Arslan having the pre-onomastic meaning ‘lion’. The authors study the variation of the name in Russian folklore and in the 15th–17th centuries documents and historical sources. They also pay particular attention to the role of Pushkin’s poem Ruslan and Ludmila in the formation of the associative background of the studied name and to various onomastic derivatives, the latter include patronyms, surnames and the female name Ruslana. The author conclude that the name Ruslan became especially popular in Soviet and post-Soviet periods when it acquired a specific “semantic aura”, namely, in Caucasus where Ruslan became a kind of mark of Russian identity and, thus, contributed to the unification of the anthroponymic space. This conclusion was verified in the course of a survey done among 40 respondents representing different peoples of Caucasus. For most respondents the name has positive connotations and is associated with the Turkic name Arslan and the name of Pushkin’s character. However, some respondents consider it as a “non-Muslim”, Russian name and point out that it is often perceived as such outside Russia. The history of the name Ruslan and the ways of its transonymisation can be an interesting object for further research, especially due to the emergence of new communication technologies and onomastic discourses.

  7. Parents accidentally substitute similar sounding sibling names more often than dissimilar names.

    Directory of Open Access Journals (Sweden)

    Zenzi M Griffin

    Full Text Available When parents select similar sounding names for their children, do they set themselves up for more speech errors in the future? Questionnaire data from 334 respondents suggest that they do. Respondents whose names shared initial or final sounds with a sibling's reported that their parents accidentally called them by the sibling's name more often than those without such name overlap. Having a sibling of the same gender, similar appearance, or similar age was also associated with more frequent name substitutions. Almost all other name substitutions by parents involved other family members and over 5% of respondents reported a parent substituting the name of a pet, which suggests a strong role for social and situational cues in retrieving personal names for direct address. To the extent that retrieval cues are shared with other people or animals, other names become available and may substitute for the intended name, particularly when names sound similar.

  8. Rare earth metals for automotive exhaust catalysts

    International Nuclear Information System (INIS)

    Shinjoh, Hirohumi

    2006-01-01

    The usage of rare earth metals for automotive exhaust catalysts is demonstrated in this paper. Rare earth metals have been widely used in automotive catalysts. In particular, three-way catalysts require the use of ceria compounds as oxygen storage materials, and lanthana as both a stabilizer of alumina and a promoter. The application for diesel catalysts is also illustrated. Effects of inclusion of rare earth metals in automotive catalysts are discussed

  9. Biomass processing over gold catalysts

    CERN Document Server

    Simakova, Olga A; Murzin, Dmitry Yu

    2014-01-01

    The book describes the valorization of biomass-derived compounds over gold catalysts. Since biomass is a rich renewable feedstock for diverse platform molecules, including those currently derived from petroleum, the interest in various transformation routes has become intense. Catalytic conversion of biomass is one of the main approaches to improving the economic viability of biorefineries.  In addition, Gold catalysts were found to have outstanding activity and selectivity in many key reactions. This book collects information about transformations of the most promising and important compounds derived from cellulose, hemicelluloses, and woody biomass extractives. Since gold catalysts possess high stability under oxidative conditions, selective oxidation reactions were discussed more thoroughly than other critical reactions such as partial hydrogenation, acetalization, and isomerization. The influence of reaction conditions, the role of the catalyst, and the advantages and disadvantages of using gold are pre...

  10. Amerindian names of Colombian palms (Palmae

    Directory of Open Access Journals (Sweden)

    Diana Marmolejo

    2014-03-01

    Full Text Available A glossary of 1276 Amerindian names or name variants of palms is presented, representing at least 121 species in 64 aboriginal languages of Colombia. The species with documented names in the largest number of languages are Bactris gasipaes, Oenocarpus bataua, Mauritia flexuosa,Euterpe precatoria, andAstrocaryum chambira, which are five of the most used palms in South America. The languages with the largest number of named species are uitoto (48, tikuna (47, muinane (43, siona (34, sikuani (31 and miraña (30. These figures reflect the detailed studies carried out with these ethnic groups, besides the palm diversity of their territories and their knowledge about it. The names are presented in three separate lists –arranged by species, by language, and a global list of names that includes references for each individual record.

  11. Gorlin-Goltz: what's in a name?

    LENUS (Irish Health Repository)

    McNamara, T

    1998-03-01

    This paper describes the clinical features of two very distinct syndromes with similar names: Gorlin-Goltz and Goltz-Gorlin Syndromes. A case report is presented that highlights the differences between these syndromes. To avoid errors in diagnosis because of the similarity in names, the authors caution that, based on additional information now available, the preferred names should be Focal Dermal Hypoplasia syndrome for Goltz-Gorlin syndrome and Nevoid Basal Cell Carcinoma syndrome for Gorlin-Goltz syndrome.

  12. Navy Ship Names: Background for Congress

    Science.gov (United States)

    2016-09-14

    Secretary considers these nominations , along with others he receives as well as his own thoughts in this matter. At appropriate times, he selects names...Research Service 16 “ nomination ” process is often fiercely contested as differing groups make the case that “their” ship name is the most fitting...and practices of the Navy for naming vessels of the Navy, and an explanation for such variances;  Assesses the feasibility and advisability of

  13. Enhanced Source Memory for Names of Cheaters

    OpenAIRE

    Raoul Bell; Axel Buchner

    2009-01-01

    The present experiment shows that source memory for names associated with a history of cheating is better than source memory for names associated with irrelevant or trustworthy behavior, whereas old-new discrimination is not affected by whether a name was associated with cheating. This data pattern closely replicates findings obtained in previous experiments using facial stimuli, thus demonstrating that enhanced source memory for cheaters is not due to a cheater-detection module closely tied ...

  14. A radiographic anthology of vertebral names.

    Science.gov (United States)

    Yochum, T R; Hartley, B; Thomas, D P; Guebert, G M

    1985-06-01

    There are many conditions of the spine to which various authors have applied descriptive names. This paper, an extensive review of the literature, provides the first complete source for such named vertebrae. Included are 88 names covering all categories of bone disease. A brief description of the radiographic appearance and its pathogenesis is provided for each, along with a consideration of the disease processes which may produce the appearance.

  15. Can Your Institution's Name Influence Constituent Response? An Initial Assessment of Consumer Response to College Names.

    Science.gov (United States)

    Treadwell, D. F.

    2003-01-01

    Presents names of college and universities unfamiliar to potential students. Finds that one cluster of respondents had a clear preference for geographic or aspirational names while a second cluster had a preference for proper names. Notes that there was an overall preference for proper names. (SG)

  16. The innovation catalysts.

    Science.gov (United States)

    Martin, Roger L

    2011-06-01

    A few years ago the software development company Intuit realized that it needed a new approach to galvanizing customers. The company's Net Promoter Score was faltering, and customer recommendations of new products were especially disappointing. Intuit decided to hold a two-day, off-site meeting for the company's top 300 managers with a focus on the role of design in innovation. One of the days was dedicated to a program called Design for Delight. The centerpiece of the day was a PowerPoint presentation by Intuit founder Scott Cook, who realized midway through that he was no Steve Jobs: The managers listened dutifully, but there was little energy in the room. By contrast, a subsequent exercise in which the participants worked through a design challenge by creating prototypes, getting feedback, iterating, and refining, had them mesmerized. The eventual result was the creation of a team of nine design-thinking coaches--"innovation catalysts"--from across Intuit who were made available to help any work group create prototypes, run experiments, and learn from customers. The process includes a "painstorm" (to determine the customer's greatest pain point), a "soljam" (to generate and then winnow possible solutions), and a "code-jam" (to write code "good enough" to take to customers within two weeks). Design for Delight has enabled employees throughout Intuit to move from satisfying customers to delighting them.

  17. Production and Characterization of Biodiesel from Tung Oil

    Science.gov (United States)

    Park, Ji-Yeon; Kim, Deog-Keun; Wang, Zhong-Ming; Lu, Pengmei; Park, Soon-Chul; Lee, Jin-Suk

    The feasibility of biodiesel production from tung oil was investigated. The esterification reaction of the free fatty acids of rung oil was performed using Amberlyst-15. Optimal molar ratio of methanol to oil was determined to be 7.5:1, and Amberlyst-15 was 20.8wt% of oil by response surface methodology. Under these reaction conditions, the acid value of rung oil was reduced to 0.72mg KOH/g. In the range of the molar equivalents of methanol to oil under 5, the esterification was strongly affected by the amount of methanol but not the catalyst. When the molar ratio of methanol to oil was 4.1:1 and Amberlyst-15 was 29.8wt% of the oil, the acid value decreased to 0.85mg KOH/g. After the transesterification reaction of pretreated rung oil, the purity of rung biodiesel was 90.2wt%. The high viscosity of crude rung oil decreased to 9.8mm2/s at 40 °C. Because of the presence of eleostearic acid, which is a main component of tung oil, the oxidation stability as determined by the Rancimat method was very low, 0.5h, but the cold filter plugging point, -11 °C, was good. The distillation process did not improve the fatty acid methyl ester content and the viscosity.

  18. Hydroprocessing catalysts utilization and regeneration schemes

    Energy Technology Data Exchange (ETDEWEB)

    Furimsky, E.

    The catalyst reactor inventory represents an important part of the cost of hydroprocessing operation. The selection of a suitable catalyst and reactor is influenced by feedstock properties. Processes ensuring an uninterrupted operation during catalyst addition and withdrawal are preferred for processing high asphaltene and metal content feedstocks. The spent catalyst can be regenerated and returned to the operation if the extent of its deactivation is not high. The regeneration may be performed either in-situ or off-site. The former is suitable for fixed bed reactors whereas the catalyst from ebullated bed reactors must be regenerated off-site. The regeneration of spent catalysts heavily loaded with metals such as V, Ni and Fe may not be economic. Such catalysts may be suitable for metal reclamation. An environmentally safe method for catalyst disposal must be found if neither regeneration nor metal reclamation from spent catalysts can be performed.

  19. Pen- Name in Persian and Arabic Poetry

    Directory of Open Access Journals (Sweden)

    Ebrahim Khodayar

    2012-03-01

    Full Text Available  Abstract Pen-name (Takhalloss is one of the main features of Persian poetry. It has been a matter of concern among many of Persian language geography poets in the orient at least up to the Mashrouteh era. Pen-name has been promoted among the other Muslim nations throuph Persian poetry. Although it is not as famous in the Arab nations as in the Persian speaking nations, it is known as “Alqab-o-shoara” among the Arab nations and, through this way, it has affected the poetrical wealth of the Arabic poets.   The Present paper, using description-analystic approach, compares the pen-names of Persian and Arabic poets under the title of “pen-names” and investigates their features in both cultures. The main research question is: What are the similarities and differences of poetic-names, in Persian and Arabic poets in terms of the type of name, position and importance? The results showed that Pseudonym by its amazing expansion in Persian poetry has also influenced Arabic poetry. In addition to the factors affecting in the choice of pen-names (like pseudonym, pen-name, nickname..., sometimes such external factors as events, commends, community benefactors and climate, as well as internal factors including the poets’ inner beliefs are associated too. .

  20. Enhancing Communication through Gesture and Naming Therapy

    Science.gov (United States)

    Caute, Anna; Pring, Tim; Cocks, Naomi; Cruice, Madeline; Best, Wendy; Marshall, Jane

    2013-01-01

    Purpose: In this study, the authors investigated whether gesture, naming, and strategic treatment improved the communication skills of 14 people with severe aphasia. Method: All participants received 15 hr of gesture and naming treatment (reported in a companion article [Marshall et al., 2012]). Half the group received a further 15 hr of strategic…

  1. In the Names of Chinese Women.

    Science.gov (United States)

    Lee, Wen Shu

    1998-01-01

    Contributes to both feminist scholarship and Chinese Studies by coming to grips with the deep, culturally embedded, and politically significant meaning of the names given to Chinese women. Uses the analysis of two names to advance theory that will link and enrich rhetorical, feminist, and intercultural studies and break through the limits of…

  2. MILITARY NAMES IN SOUTH AFRICA - QUO VADIS?

    African Journals Online (AJOL)

    pride and unit traditions. After the war and the subsequent demobilisation of the UDF the procedures for naming were described and certain require- ments laid down. During the term of office of the Minister of Defence at the time, F.C. Erasmus,the following proce- dure for naming was promulgated - a procedure that has not ...

  3. Semantic category interference in overt picture naming

    NARCIS (Netherlands)

    Maess, B.; Friederici, A.D.; Damian, M.F.; Meyer, A.S.; Levelt, W.J.M.

    2002-01-01

    The study investigated the neuronal basis of the retrieval of words from the mental lexicon. The semantic category interference effect was used to locate lexical retrieval processes in time and space. This effect reflects the finding that, for overt naming, volunteers are slower when naming pictures

  4. 32 CFR 635.6 - Name checks.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true Name checks. 635.6 Section 635.6 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) LAW ENFORCEMENT AND CRIMINAL INVESTIGATIONS LAW ENFORCEMENT REPORTING Records Administration § 635.6 Name checks. (a) Information contained in military police records may be...

  5. Towards secure name resolution on the internet

    NARCIS (Netherlands)

    Grothoff, C.; Wachs, M.; Ermert, M.; Appelbaum, J.

    2018-01-01

    The Domain Name System (DNS) provides crucial name resolution functions for most Internet services. As a result, DNS traffic provides an important attack vector for spy agencies, as demonstrated by the QUANTUMDNS and MORECOWBELL programs of the NSA. This article reviews how DNS works, and explains

  6. Studies on recycling and utilization of spent catalysts. Preparation of active hydrodemetallization catalyst compositions from spent residue hydroprocessing catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Marafi, Meena; Stanislaus, Antony [Petroleum Refining Department, Petroleum Research and Studies Center, Kuwait Institute for Scientific Research, P.O. Box 24885, Safat (Kuwait)

    2007-02-15

    Spent catalysts form a major source of solid wastes in the petroleum refining industries. Due to environmental concerns, increasing emphasis has been placed on the development of recycling processes for the waste catalyst materials as much as possible. In the present study the potential reuse of spent catalysts in the preparation of active new catalysts for residual oil hydrotreating was examined. A series of catalysts were prepared by mixing and extruding spent residue hydroprocessing catalysts that contained C, V, Mo, Ni and Al{sub 2}O{sub 3} with boehmite in different proportions. All prepared catalysts were characterized by chemical analysis and by surface area, pore volume, pore size and crushing strength measurements. The hydrodesulfurization (HDS) and hydrodemetallization (HDM) activities of the catalysts were evaluated by testing in a high pressure fixed-bed microreactor unit using Kuwait atmospheric residue as feed. A commercial HDM catalyst was also tested under similar operating conditions and their HDS and HDM activities were compared with that of the prepared catalysts. The results revealed that catalyst prepared with addition of up to 40 wt% spent catalyst to boehmite had fairly high surface area and pore volume together with large pores. The catalyst prepared by mixing and extruding about 40 wt% spent catalyst with boehmite was relatively more active for promoting HDM and HDS reactions than a reference commercial HDM catalyst. The formation of some kind of new active sites from the metals (V, Mo and Ni) present in the spent catalyst is suggested to be responsible for the high HDM activity of the prepared catalyst. (author)

  7. Porous bimetallic PdNi catalyst with high electrocatalytic activity for ethanol electrooxidation.

    Science.gov (United States)

    Feng, Yue; Bin, Duan; Yan, Bo; Du, Yukou; Majima, Tetsuro; Zhou, Weiqiang

    2017-05-01

    Porous bimetallic PdNi catalysts were fabricated by a novel method, namely, reduction of Pd and Ni oxides prepared via calcining the complex chelate of PdNi-dimethylglyoxime (PdNi-dmg). The morphology and composition of the as-prepared PdNi were investigated by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD). Furthermore, the electrochemical properties of PdNi catalysts towards ethanol electrooxidation were also studied by electrochemical impedance spectrometry (EIS), cyclic voltammetry (CV) and chronoamperometry (CA) measurement. In comparison with porous Pd and commercial Pd/C catalysts, porous structural PdNi catalysts showed higher electrocatalytic activity and durability for ethanol electrooxidation, which may be ascribed to Pd and Ni property, large electroactive surface area and high electron transfer property. The Ni exist in the catalyst in the form of the nickel hydroxides (Ni(OH) 2 and NiOOH) which have a high electron and proton conductivity enhances the catalytic activity of the catalysts. All results highlight the great potential application of the calcination-reduction method for synthesizing high active porous PdNi catalysts in direct ethanol fuel cells. Copyright © 2017 Elsevier Inc. All rights reserved.

  8. A novel hybrid catalyst for the esterification of high FFA in Jatropha oil for biodiesel production

    International Nuclear Information System (INIS)

    Mushtaq, M.; Tan, I.M.; Sagir, M.; Suleman Tahir, M.; Pervaiz, M.

    2016-01-01

    The synthesis and application of a hybrid catalyst for the esterification of free fatty acids (FFA) in Jatropha oil is reported. Three catalysts, namely silica sulfuric acid, silica supported boron trifluoride and a combination of the two in the weight ratio of 1:1, the hybrid catalyst, were investigated. Jatropha oil samples with a wide range of FFA values i.e. 6.64 to 45.64% were prepared and utilized for the experimental work. This study revealed that silica sulfuric acid and silica supported boron trifluoride were not very effective when used independently. However, a strong synergistic effect was noted in the catalytic activity of the hybrid catalyst which reduced the FFA value from 45.64 to 0.903% with a conversion efficiency of 98%. Reusability of the catalyst was also tested and the results were promising in up to three cycles of use when used with lower amounts of FFA (6.64%) in the oil. Under the influence of the catalyst, the reaction was found to follow first order kinetics. Activation energy was calculated to be 45.42 KJ·mol−1 for 2 wt.% of hybrid catalyst. The products were analyzed by FT-IR and NMR spectroscopic techniques and the results are reported. [es

  9. Domain learning naming game for color categorization.

    Science.gov (United States)

    Li, Doujie; Fan, Zhongyan; Tang, Wallace K S

    2017-01-01

    Naming game simulates the evolution of vocabulary in a population of agents. Through pairwise interactions in the games, agents acquire a set of vocabulary in their memory for object naming. The existing model confines to a one-to-one mapping between a name and an object. Focus is usually put onto name consensus in the population rather than knowledge learning in agents, and hence simple learning model is usually adopted. However, the cognition system of human being is much more complex and knowledge is usually presented in a complicated form. Therefore, in this work, we extend the agent learning model and design a new game to incorporate domain learning, which is essential for more complicated form of knowledge. In particular, we demonstrate the evolution of color categorization and naming in a population of agents. We incorporate the human perceptive model into the agents and introduce two new concepts, namely subjective perception and subliminal stimulation, in domain learning. Simulation results show that, even without any supervision or pre-requisition, a consensus of a color naming system can be reached in a population solely via the interactions. Our work confirms the importance of society interactions in color categorization, which is a long debate topic in human cognition. Moreover, our work also demonstrates the possibility of cognitive system development in autonomous intelligent agents.

  10. Precedent Names of Chinese National Culture

    Directory of Open Access Journals (Sweden)

    Валентина Алексеевна Ленинцева

    2015-12-01

    Full Text Available The article presents an analysis of precedent names as symbols of precedent phenomena in the material and spiritual culture of the Chinese. An evaluation of daily events and the attitude of the Chinese towards the world are reflected in the vocabulary of their language. The symbols of precedent phenomena can be proper names (anthroponomy, names of places, the date, as well as figurative and expressive means of language (idioms, sayings. Precedent names as symbols of precedent phenomena vividly and accurately capture the above-mentioned points, and encompass almost all spheres of life, history and spiritual development. The subject of our study are national precedent phenomena that define the ethno-cultural specificity, reflecting the history and culture of the Chinese people and their national character. Representatives of different cultures have different perceptions of the same precedent phenomena. Inadequate understanding of national invariants of precedent phenomena is often the source of communication failures. The aim of this paper is to highlight precedent names as a symbol of precedent phenomena in the discourse of the Chinese linguocultural community. For this purpose a classification of precedent names in Chinese was carried out. Precedent names which play an important role in shaping the Chinese national consciousness were taken from the Chinese-Russian Dictionary.

  11. Magnetic minerals from volcanic Ultisols as heterogeneous Fenton catalysts

    International Nuclear Information System (INIS)

    Aravena, S.; Pizarro, C.; Rubio, M. A.; Cavalcante, L. C. D.; Garg, V. K.; Pereira, M. C.; Fabris, J. D.

    2010-01-01

    This study was devoted to the evaluation of the effectiveness of Fenton catalysts, based on magnetically-concentrated portions of iron oxide-rich sand fractions from two magnetic Ultisols, derived from volcanic materials of southern Chile. The samples were labeled according to the municipality where the sample sites are geographically located, namely Metrenco and Collipulli, and were characterized with Moessbauer spectroscopy at 298 K and saturation magnetization (σ) measurements. Moessbauer data revealed a complex magnetic hyperfine structure for these magnetic portions from both soil-sand materials, suggesting relatively complex mineral assemblages. The monitored rate of H 2 O 2 decomposition via heterogeneous Fenton reaction revealed that materials from the Collipulli soil are more efficient Fenton catalyst than are those from the Metrenco soil. The reasons for these differences are from now on being explored on basis of a more detailed chemical investigation of these samples.

  12. Changing the Family Name by Administrative Means

    Directory of Open Access Journals (Sweden)

    Duret Nicu

    2009-06-01

    Full Text Available In the Roman law, changing the name was possible except for the case in which this changewould have been fraudulent. This possibility was kept also in the Middle Age but with some restrictions:the handicraftsmen were not allowed to change their name when it served as a factory brand, the notarycould not change his name without having an authorization, and neither could he change his normalsignature. Gradually, the monarchy increased its control in this matter, tending to transform a socialinstitution into a police one.

  13. Origin names of gochu, kimchi, and bibimbap

    Directory of Open Access Journals (Sweden)

    Hye-Jeong Yang

    2015-12-01

    Conclusion: Gochu, kimchi, and bibimbap have thousands of years of history and have been called with pure Korean name words. It was only that they were recorded in the form of hanja during the time written Korean was undervalued where people insisted borrowing Chinese characters to write despite written Korean being available. Thus, gocho (苦椒, chimchae (沈菜, and koldonban (滑董飯 are not the origin names. The pure Korean names used even by the people back then are the actual ones: gochyo (고쵸, dimchae (딤, and bubuimbap (부뷤밥.

  14. Enhanced Source Memory for Names of Cheaters

    Directory of Open Access Journals (Sweden)

    Raoul Bell

    2009-04-01

    Full Text Available The present experiment shows that source memory for names associated with a history of cheating is better than source memory for names associated with irrelevant or trustworthy behavior, whereas old-new discrimination is not affected by whether a name was associated with cheating. This data pattern closely replicates findings obtained in previous experiments using facial stimuli, thus demonstrating that enhanced source memory for cheaters is not due to a cheater-detection module closely tied to the face processing system, but is rather due to a more general bias towards remembering the source of information associated with cheating.

  15. Regeneration of Hydrotreating and FCC Catalysts

    Energy Technology Data Exchange (ETDEWEB)

    CM Wai; JG Frye; JL Fulton; LE Bowman; LJ Silva; MA Gerber

    1999-09-30

    Hydrotreating, hydrocracking, and fluid catalytic cracking (FCC) catalysts are important components of petroleum refining processes. Hydrotreating and hydrocracking catalysts are used to improve the yield of high-quality light oil fractions from heavier crude oil and petroleum feedstocks containing high levels of impurities. FCC catalysts improve the yield of higher octane gasoline from crude oil. Residuum hydrotreating and cracking catalysts are susceptible to irreversible deactivation caused by adsorption of sulfur and by metals impurities, such as vanadium and nickel. The gradual buildup of these impurities in a hydrotreating catalyst eventually plugs the pores and deactivates it. Nickel and vanadium adversely affect the behavior of cracking catalysts, reducing product yield and quality. Replacing deactivated catalysts represents a significant cost in petroleum refining. Equally important are the costs and potential liabilities associated with treating and disposing spent catalysts. For example, recent US Environmental Protection Agency rulings have listed spent hydrotreating and hydrorefining catalysts as hazardous wastes. FCC catalysts, though more easily disposed of as road-base or as filler in asphalt and cement, are still an economic concern mainly because of the large volumes of spent catalysts generated. New processes are being considered to increase the useful life of catalysts or for meeting more stringent disposal requirements for spent catalysts containing metals. This report discusses a collaborative effort between Pacific Northwest National Laboratory (PNNL) and Phillips Petroleum, Inc., to identify promising chemical processes for removing metals adhered to spent hydrodesulfurization (HDS, a type of hydrotreating catalyst) and FCC catalysts. This study, conducted by PNNL, was funded by the US Department of Energy's Bartlesville Project Office. Fresh and spent catalysts were provided by Phillips Petroleum. The FCC catalyst was a rare

  16. Coking of residue hydroprocessing catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Gray, M.R.; Zhao, Y.X. [Alberta Univ., Edmonton, AB (Canada). Dept. of Chemical Engineering; McKnight, C.A. [Syncrude Canada Ltd., Edmonton, AB (Canada); Komar, D.A.; Carruthers, J.D. [Cytec Industries Inc., Stamford, CT (United States)

    1997-11-01

    One of the major causes of deactivation of Ni/Mo and Co/Mo sulfide catalysts for hydroprocessing of heavy petroleum and bitumen fractions is coke deposition. The composition and amount of coke deposited on residue hydroprocessing catalysts depends on the composition of the liquid phase of the reactor. In the Athabasca bitumen, the high molecular weight components encourage coke deposition at temperatures of 430 to 440 degrees C and at pressures of 10 to 20 MPa hydrogen pressure. A study was conducted to determine which components in the heavy residual oil fraction were responsible for coking of catalysts. Seven samples of Athabasca vacuum residue were prepared by supercritical fluid extraction with pentane before being placed in the reactor. Carbon content and hydrodesulfurization activity was measured. It was concluded that the deposition of coke depended on the presence of asphaltenes and not on other compositional variables such as content of nitrogen, aromatic carbon or vanadium.

  17. Catalyst containing oxygen transport membrane

    Science.gov (United States)

    Christie, Gervase Maxwell; Wilson, Jamie Robyn; van Hassel, Bart Antonie

    2012-12-04

    A composite oxygen transport membrane having a dense layer, a porous support layer and an intermediate porous layer located between the dense layer and the porous support layer. Both the dense layer and the intermediate porous layer are formed from an ionic conductive material to conduct oxygen ions and an electrically conductive material to conduct electrons. The porous support layer has a high permeability, high porosity, and a high average pore diameter and the intermediate porous layer has a lower permeability and lower pore diameter than the porous support layer. Catalyst particles selected to promote oxidation of a combustible substance are located in the intermediate porous layer and in the porous support adjacent to the intermediate porous layer. The catalyst particles can be formed by wicking a solution of catalyst precursors through the porous support toward the intermediate porous layer.

  18. What’s in a Name? – Consequences of Naming Non-Human Animals

    DEFF Research Database (Denmark)

    Borkfelt, Sune

    2011-01-01

    have consequences for the way we think about animals (human and non-human), peoples, species, places, things etc. Through a blend of history, philosophy and representational theory—and using examples from, among other things, the Bible, Martin Luther, colonialism/imperialism and contemporary ways......The act of naming is among the most basic actions of language. Indeed, it is naming something that enables us to communicate about it in specific terms, whether the object named is human or non-human, animate or inanimate. However, naming is not as uncomplicated as we may usually think and names...... of keeping and regarding non-human animals—this paper attempts to trace the importance of (both specific and generic) naming to our relationships with the non-human. It explores this topic from the naming of the animals in Genesis to the names given and used by scientists, keepers of companion animals, media...

  19. Geographic Names Information System (GNIS) Structures

    Data.gov (United States)

    Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

  20. Geographic Names Information System (GNIS) Historical Features

    Data.gov (United States)

    Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

  1. Geographic Names Information System (GNIS) Admin Features

    Data.gov (United States)

    Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

  2. Geographic Names Information System (GNIS) Hydrography Lines

    Data.gov (United States)

    Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

  3. Geographic Names Information System (GNIS) Cultural Features

    Data.gov (United States)

    Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

  4. Geographic Names Information System (GNIS) Landform Features

    Data.gov (United States)

    Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

  5. Geographic Names Information System (GNIS) Hydrography Points

    Data.gov (United States)

    Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

  6. Geographic Names Information System (GNIS) Community Features

    Data.gov (United States)

    Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

  7. Geographic Names Information System (GNIS) Transportation Features

    Data.gov (United States)

    Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

  8. The change of religion and the names

    Directory of Open Access Journals (Sweden)

    John Kousgård Sørensen

    1990-01-01

    Full Text Available What actually happened at the time when Denmark was christianized? An important viewpoint to the topic is the nomenclature, both personal names and place-names. What happened to these in the missionary period? Can they be exploited as evidence about the change of religion? What happened to these and to the naming practices in connection with the introduction of Christianity? These questions are relevant, because several pre-Christian cultic words entered into the personal nomenclature which the Christian mission found in use on its arrival. The fate of the nomenclature in the period does suggest that the change in religion took place reasonably peacefully and gradually. There are, however, certain features about the place-names suggesting that there were local differences in the conduct of the mission.

  9. Listing of awardee names: Active awards

    Energy Technology Data Exchange (ETDEWEB)

    1994-07-01

    This catalog/directory presents DOE`s procurement and assistance data system, arranged according to awardee name, bin, completion date, description of work, division, vendor ID, city, state, congressional district, contract value, obligations to date, P/S.

  10. Geographic Names Information System (GNIS) Antarctica Features

    Data.gov (United States)

    Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

  11. About the scientific names of paraphyletic taxa

    OpenAIRE

    TIMM, Tarmo

    2012-01-01

    The 'naturality' of monophyletic taxa in comparison with that of paraphyletic ones is discussed, with examples from Clitellata. Regular scientific names for paraphyletic taxa are inevitable in a workable biological classification.

  12. GNIS: Geographic Names Information Systems - All features

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The Geographic Names Information System (GNIS) actively seeks data from and partnerships with Government agencies at all levels and other interested organizations....

  13. Analisi Pengaruh Store Name, Brand Name, Dan Price Discounts Terhadap Purchase Intentions Konsumen Infinite Tunjungan Plaza

    OpenAIRE

    Gunawan, Andy

    2013-01-01

    Andy Gunawan:SkripsiAnalisis pengaruh store name, brand name dan price discounts terhadap purchase intention konsumen infnite tunjungan plaza Di era globalisasi ini, persaingan dagang antara Perusahaan – Perusahaan baik lokal maupun global menjadi semakin ketat, oleh karena itu Perusahaan selalu berusaha untuk meningkatkan ketertarikan minat beli konsumen. Beberapa variabel yang menjadi fokus Perusahaan adalah store name, brand name, dan price discount. Tujuan penelitian ini adalah untuk meng...

  14. exchanged Mg-Al hydrotalcite catalyst

    Indian Academy of Sciences (India)

    ) catalysts, ... The catalyst can be easily separated by simple filtration ... surface area by the single-point N2 adsorption method ... concentration of carbonate anions (by treating the cat- .... hydrotalcite phase along with copper hydroxide and.

  15. Use of lanthanide catalysts in air electrodes

    International Nuclear Information System (INIS)

    Souza Parente, L.T. de

    1982-01-01

    A review on the lanthanide catalysts suitable for the reduction catalysis of oxygen in air electrodes is presented. The kinds of lanthanide indicated to be used as catalysts of oxygen reduction are shown. (A.R.H.) [pt

  16. Catalyst for Decomposition of Nitrogen Oxides

    Science.gov (United States)

    Schryer, David R. (Inventor); Jordan, Jeffrey D. (Inventor); Akyurtlu, Ates (Inventor); Akyurtlu, Jale (Inventor)

    2015-01-01

    This invention relates generally to a platinized tin oxide-based catalyst. It relates particularly to an improved platinized tin oxide-based catalyst able to decompose nitric oxide to nitrogen and oxygen without the necessity of a reducing gas.

  17. Polymer-bound rhodium hydroformylation catalysts

    NARCIS (Netherlands)

    Jongsma, Tjeerd

    1992-01-01

    Homogeneous catalysts are superior in activity, selectivity as well as specificity, but heterogeneous catalyst are often preferred in industrial processes, because of their good recoverability and their applicability in continuous flow reactors. It would be of great environmental, commercial and

  18. Novel Fischer-Tropsch catalysts. [DOE patent

    Science.gov (United States)

    Vollhardt, K.P.C.; Perkins, P.

    Novel compounds are described which are used as improved Fischer-Tropsch catalysts particularly for the conversion of CO + H/sub 2/ to gaseous and liquid hydrocarbons at milder conditions than with prior catalysts.

  19. A novel magnetically recyclable heterogeneous catalyst

    Indian Academy of Sciences (India)

    propanesultone. 1. Introduction ... O. Scheme 2. The reaction of benzaldehyde with 1-phenyl-3- ... (2 mmol), catalyst (2 mol%, except for entries 7 and 9), room temperature. bCatalyst = 1 .... The electronic supporting information can be seen in.

  20. Rhenium Nanochemistry for Catalyst Preparation

    Directory of Open Access Journals (Sweden)

    Vadim G. Kessler

    2012-08-01

    Full Text Available The review presents synthetic approaches to modern rhenium-based catalysts. Creation of an active center is considered as a process of obtaining a nanoparticle or a molecule, immobilized within a matrix of the substrate. Selective chemical routes to preparation of particles of rhenium alloys, rhenium oxides and the molecules of alkyltrioxorhenium, and their insertion into porous structure of zeolites, ordered mesoporous MCM matrices, anodic mesoporous alumina, and porous transition metal oxides are considered. Structure-property relationships are traced for these catalysts in relation to such processes as alkylation and isomerization, olefin metathesis, selective oxidation of olefins, methanol to formaldehyde conversion, etc.

  1. Hydrothermal performance of catalyst supports

    Energy Technology Data Exchange (ETDEWEB)

    Elam, Jeffrey W.; Marshall, Christopher L.; Libera, Joseph A.; Dumesic, James A.; Pagan-Torres, Yomaira J.

    2018-04-10

    A high surface area catalyst with a mesoporous support structure and a thin conformal coating over the surface of the support structure. The high surface area catalyst support is adapted for carrying out a reaction in a reaction environment where the thin conformal coating protects the support structure within the reaction environment. In various embodiments, the support structure is a mesoporous silica catalytic support and the thin conformal coating comprises a layer of metal oxide resistant to the reaction environment which may be a hydrothermal environment.

  2. Quick Guide to Flash Catalyst

    CERN Document Server

    Elmansy, Rafiq

    2011-01-01

    How do you transform user interface designs created in Photoshop or Illustrator into interactive web pages? It's easier than you think. This guide shows you how to use Adobe Flash Catalyst to create interactive UIs and website wireframes for Rich Internet Applications-without writing a single line of code. Ideal for web designers, this book introduces Flash Catalyst basics with detailed step-by-step instructions and screenshots that illustrate every part of the process. You'll learn hands-on how to turn your static design or artwork into working user interfaces that can be implemented in Fla

  3. Preparation of inorganic hydrophobic catalysts

    International Nuclear Information System (INIS)

    Yang, Yong; Wang, Heyi; Du, Yang

    2009-04-01

    In order to catalyse the oxidation of tritium gas, two inorganic hydrophobic catalysts are prepared. Under room temperature, the catalysed oxidation ratio of 0.3%-1% (V/V) hydrogen gas in air is higher than 95%. Pt-II inorganic hydrophobic catalysts has obviously better catalysing ability than Pt-PTFE and lower ability than Pt-SDB in H 2 -HTO isotopic exchange, because the pressure resistence of Pt-II is much higher than Pt-SDB, it can be used to the CECE cell of heavy water detritium system. (authors)

  4. The Translation of Chinese Dish Names

    Institute of Scientific and Technical Information of China (English)

    龚佳文

    2015-01-01

    The traditional food of a nation reflects its historical and cultural characteristics This thesis begins with an introduction to the translation situation of Chinese dish names and its existing problem nowadays, and proceeds to the translation principles and tactics for English translation of the names of Chinese dishes, based on Eugene A. Nida’ s Functional Equivalence, with an aim to improve translation efficiency and promote cross-cultural communication, and promoting Chinese food culture throughout the globe.

  5. Passive Detection of Misbehaving Name Servers

    Science.gov (United States)

    2013-10-01

    name servers that changed IP address five or more times in a month. Solid red line indicates those servers possibly linked to pharmaceutical scams . 12...malicious and stated that fast-flux hosting “is considered one of the most serious threats to online activities today” [ICANN 2008, p. 2]. The...that time, apparently independent of filters on name-server flux, a large number of pharmaceutical scams1 were taken down. These scams apparently

  6. The Private Legal Governance of Domain Names

    DEFF Research Database (Denmark)

    Schovsbo, Jens Hemmingsen

    2016-01-01

    This chapter evaluates the performance of the special private tribunals or panels such as the UDRP which have been developed within complicated systems of self- and co-regulation such as ICANN to decide disputes over domain names. It uses two different dispute resolution models viz. the UDRP (WIP...... trademarks are used as (parts of) domain names to express criticism of the trademark holder or the trademark itself (e.g. “TMsucks.com” / “lorteTM.dk”)....

  7. Sustained Attention Ability Affects Simple Picture Naming

    Directory of Open Access Journals (Sweden)

    Suzanne R. Jongman

    2017-07-01

    Full Text Available Sustained attention has previously been shown as a requirement for language production. However, this is mostly evident for difficult conditions, such as a dual-task situation. The current study provides corroborating evidence that this relationship holds even for simple picture naming. Sustained attention ability, indexed both by participants’ reaction times and individuals’ hit rate (the proportion of correctly detected targets on a digit discrimination task, correlated with picture naming latencies. Individuals with poor sustained attention were consistently slower and their RT distributions were more positively skewed when naming pictures compared to individuals with better sustained attention. Additionally, the need to sustain attention was manipulated by changing the speed of stimulus presentation. Research has suggested that fast event rates tax sustained attention resources to a larger degree than slow event rates. However, in this study the fast event rate did not result in increased difficulty, neither for the picture naming task nor for the sustained attention task. Instead, the results point to a speed-accuracy trade-off in the sustained attention task (lower accuracy but faster responses in the fast than in the slow event rate, and to a benefit for faster rates in the picture naming task (shorter naming latencies with no difference in accuracy. Performance on both tasks was largely comparable, supporting previous findings that sustained attention is called upon during language production.

  8. The history of Latin teeth names.

    Science.gov (United States)

    Šimon, František

    2015-01-01

    This paper aims to give an account of the Latin naming of the different types of teeth by reviewing relevant historical and contemporary literature. The paper presents etymologies of Latin or Greek teeth names, their development, variants and synonyms, and sometimes the names of their authors. The Greek names did not have the status of official terms, but the Latin terms for particular types of teeth gradually established themselves. Names for the incisors, canines and molars are Latin calques for the Greek ones (tomeis, kynodontes, mylai), dens serotinus is an indirect calque of the Greek name (odús) opsigonos, and the term pre-molar is created in the way which is now common in modern anatomical terminology, using the prefix prae- = pre and the adjective molaris. The Latin terms dentes canini and dentes molares occur in the Classical Latin literature, the term (dentes) incisivi is found first time in medieval literature, and the terms dentes premolares and dens serotinus are modern-age ones.

  9. Plants and geographical names in Croatia.

    Science.gov (United States)

    Cargonja, Hrvoje; Daković, Branko; Alegro, Antun

    2008-09-01

    The main purpose of this paper is to present some general observations, regularities and insights into a complex relationship between plants and people through symbolic systems like geographical names on the territory of Croatia. The basic sources of data for this research were maps from atlas of Croatia of the scale 1:100000. Five groups of maps or areas were selected in order to represent main Croatian phytogeographic regions. A selection of toponyms from each of the map was made in which the name for a plant in Croatian language was recognized (phytotoponyms). Results showed that of all plant names recognized in geographical names the most represented are trees, and among them birch and oak the most. Furthermore, an attempt was made to explain the presence of the most represented plant species in the phytotoponyms in the light of general phytogeographical and sociocultural differences and similarities of comparing areas. The findings confirm an expectation that the genera of climazonal vegetation of particular area are the most represented among the phytotoponyms. Nevertheless, there are ample examples where representation of a plant name in the names of human environment can only be ascribed to ethno-linguistic and socio-cultural motives. Despite the reductionist character of applied methodology, this research also points out some advantages of this approach for ethnobotanic and ethnolinguistic studies of greater areas of human environment.

  10. Paraffin Alkylation Using Zeolite Catalysts in a slurry reactor: Chemical Engineering Principles to Extend Catalyst Lifetime

    NARCIS (Netherlands)

    Jong, K.P. de; Mesters, C.M.A.M.; Peferoen, D.G.R.; Brugge, P.T.M. van; Groot, C. de

    1996-01-01

    The alkylation of isobutane with 2-butene is carried out using a zeolitic catalyst in a well stirred slurry reactor. Whereas application of fixed bed technology using a solid acid alkylation catalyst has in the led to catalysts lifetimes in the range of minutes, in this work we report catalyst

  11. Rare behaviour of a catalyst pellet catalyst dynamics

    NARCIS (Netherlands)

    Westerterp, K.R.; Loonen, R.A.; Martens, A.

    1986-01-01

    Temperature overshoots and undershoots were found for a Pd on alumina catalyst pellet in its course towards a new steady state after a change in concentration of one of the reactants ethylene or hydrogen. When cooling the pellet, after heat-up by reaction, with pure hydrogen a sudden temperature

  12. Colloidal nanoparticles as catalysts and catalyst precursors for nitrite hydrogenation

    NARCIS (Netherlands)

    Zhao, Yingnan

    2015-01-01

    The most distinguished advantage to use colloidal methods for catalyst preparation is that the size and the shape of nanoparticles can be manipulated easily under good control, which is normally difficult to achieve by using traditional methods, such as impregnation and precipitation. This

  13. Alternative deNO{sub x} catalysts and technologies

    Energy Technology Data Exchange (ETDEWEB)

    Due-Hansen, J.

    2010-06-15

    Two approaches are undertaken in the present work to reduce the emission of NO{sub x}: by means of catalytic removal, and by NO absorption in ionic liquids. The commercial catalyst used for the selective catalytic reduction (SCR) of nitrogen oxides exhibits high activity and selectivity towards N{sub 2}. However, the vanadia-titania-based catalyst used is very sensitive to deactivation by alkali-species (primarily potassium), which are typically present in high amounts in the flue gas when biomass is combusted. By co-firing with large amounts of CO{sub 2}-neutral straw or wood (to meet stringent CO{sub 2} emission legislation), the lifetime of the traditional SCR catalyst is thus significantly reduced due to the presence of deactivating species originating from the fuel. To develop a catalyst less susceptible to the poisons present in the flue gas, a number of catalysts have been synthesized and tested in the present work, all based on commercially available supports. A highly acidic support consisting of sulfated zirconia was chosen based on preliminary studies. A number of different active species distributed on the support were investigated, such as iron, copper and vanadium oxides. However, based on the catalysts performance in the SCR reaction and their resistances towards potassium, the most promising candidate of the formulations studied was the vanadia-loaded catalyst, i.e. V{sub 2}O{sub 5}-SO{sub 4}2-ZrO{sub 2}. This work, together with an introduction to the catalytic removal of NO{sub x}, are described in chapter 3. The remainder of the first part is concerned with the catalytic NO{sub x} removal (chapter 4) and it addresses the upscaling of the best catalyst candidate. The catalyst was mixed with the natural binding clay (sepiolite) to upscale the selected catalyst to the monolithic level, suitable for installation in gas stream with high flows, e.g. a flue gas duct of a power plant. A series of catalyst pellets with increasing levels of sepiolite were

  14. Green nano-catalyst for methanolysis of non-edible Jatropha oil

    International Nuclear Information System (INIS)

    Teo, Siow Hwa; Rashid, Umer; Taufiq-Yap, Yun Hin

    2014-01-01

    Highlights: • A green nano heterogeneous base catalyst was prepared from CaO. • Transesterified Jatropha curcas oil achieved 95% of biodiesel yield at 65 °C. • Parameters affecting catalyst reaction were optimized. • Biodiesel produced was satisfied the International biodiesel standards. - Abstract: Non-edible feedstocks are regarded as a sustainable source of renewable energy. In order to find renewable, cheaper and easier methods to obtain energy, attention has been paid to develop potential green catalyst to produce renewable biodiesel. The catalyst was characterized by X-ray diffraction (XRD) results in combination with thermogravimetry–differential thermal analysis (TG–DTA), Brunauer–Emmer–Teller (BET), Fourier transfrom-infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). TEM analysis depicted that calcium methoxide (Ca(OCH 3 ) 2 ) catalysts were in size of 34.7 nm. The reaction parameters namely; reaction time, methanol/oil molar ratio, catalyst dosage were investigated for fatty acid methyl ester (FAME) yield. The highest biodiesel yield (95%) was appraised under the optimum condition (i.e. catalyst amount of 2 wt.%; methanol/oil molar ratio of 15:1, reaction time of 90 min). The Ca(OCH 3 ) 2 phase of catalyst can be regarded as an active phase to get high yield of biodiesel which was confirmed from characterization study. Furthermore, important fuel properties were also investigated and satisfied the ASTM D6751 and European 14214 biodiesel standards. Thus, Ca(OCH 3 ) 2 catalyst prepared in this study was having efficient, low toxicity, cost effective and easy to prepare for green fuels production especially biodiesel

  15. Development of supported noble metal catalyst for U(VI) to U(IV) reduction

    International Nuclear Information System (INIS)

    Tyagi, Deepak; Varma, Salil; Bhattacharyya, K.; Tripathi, A.K.; Bharadwaj, S.R.; Jain, V.K.; Sahu, Avinash; Vincent, Tessy; Jagatap, B.N.; Wattal, P.K.

    2015-01-01

    Uranium-plutonium separation is an essential step in the PUREX process employed in spent nuclear fuel reprocessing. This partitioning in the PUREX process is achieved by selective reduction of Pu(IV) to Pu(III) using uranous nitrate as reductant and hydrazine as stabilizer. Currently in our Indian reprocessing plants, the requirement of uranous nitrate is met by electrolytic reduction of uranyl nitrate. This process, however, suffers from a major drawback of incomplete reduction with a maximum conversion of ~ 60%. Catalytic reduction of U(VI) to U(IV) is being considered as one of the promising alternatives to the electro-reduction process due to fast kinetics and near total conversion. Various catalysts involving noble metals like platinum (Adams catalyst, Pt/Al 2 O 3 , Pt/SiO 2 etc.) have been reported for the reduction. Sustained activity and stability of the catalyst under harsh reaction conditions are still the issues that need to be resolved. We present here the results on zirconia supported noble metal catalyst that is developed in BARC for reduction of uranyl nitrate to uranous nitrate. Supported noble metal catalysts with varying metal loadings (0.5 - 2 wt%) were prepared via support precipitation and noble metal impregnation. The green catalysts were reduced either by chemical reduction using hydrazine hydrate or by heating in hydrogen flow or combination of both the steps. These catalysts were characterized by various techniques such as, XRD, SEM, TEM, N 2 adsorption and H 2 chemisorption. Performance of these catalysts was evaluated for U(VI) to U(IV) reduction with uranyl nitrate feed using hydrazine as reductant. The results with the most active catalyst are named as 'BARC-CAT', which was developed in our lab. (author)

  16. Catalysts and methods of using the same

    Energy Technology Data Exchange (ETDEWEB)

    Slowing, Igor Ivan; Kandel, Kapil

    2017-02-14

    The present invention provides a catalyst including a mesoporous silica nanoparticle and a catalytic material comprising iron. In various embodiments, the present invention provides methods of using and making the catalyst. In some examples, the catalyst can be used to hydrotreat fatty acids or to selectively remove fatty acids from feedstocks.

  17. Novel non-platinum metal catalyst material

    DEFF Research Database (Denmark)

    2014-01-01

    The present invention relates to a novel non-platinum metal catalyst material for use in low temperature fuel cells and electrolysers and to fuel cells and electrolysers comprising the novel non-platinum metal catalyst material. The present invention also relates to a novel method for synthesizing...... the novel non-platinum metal catalyst material....

  18. Efficient epoxidation of propene using molecular catalysts

    DEFF Research Database (Denmark)

    Markovits, Iulius I. E.; Anthofer, Michael H.; Kolding, Helene

    2014-01-01

    The epoxidation of propene is performed in homogeneous phase using various molecular catalysts and H2O2 or tert-butyl hydroperoxide as oxidants. A comparison between some molybdenum catalysts and methyltrioxorhenium (MTO) shows that the well known Re catalyst is the best among the examined...

  19. The Stability of Supported Gold Catalysts

    NARCIS (Netherlands)

    Masoud, Nazila

    2018-01-01

    Gold has supreme cultural and financial value and, in form of nanoparticles smaller than 10 nm, is a unique catalyst for different industrially relevant reactions. Intriguing properties of the gold catalysts have spurred demand in the chemical industry for Au catalysts, the application of which

  20. Low platinum catalyst and method of preparation

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Di-Jia; Chong, Lina

    2017-11-21

    A low platinum catalyst and method for making same. The catalyst comprises platinum-transition metal bimetallic alloy microcrystallites over a transition metal-nitrogen-carbon composite. A method of making a catalyst comprises preparation of transition metal organic frameworks, infusion of platinum, thermal treatment, and reduction to form the microcrystallites and composite.

  1. The Names of God in Jewish Mysticism

    Directory of Open Access Journals (Sweden)

    Konstantin Burmistrov

    2014-12-01

    Full Text Available The concept of the names of God and their role in the creation and existence of the world, as well as the practice of their veneration constitute an essential part of Judaism in general, and are elaborated in detail in Jewish mysticism. In Kabbalah, an idea of the creative power of the Tetragrammaton (the ineff able four-letter Name and other names occupies an especially prominent place. It is based on the idea of linguistic mysticism conveyed in the Jewish mystical treatise Sefer Yetzirah (“Book of Creation”, 3–6 centuries AD.. According to this ancient text, the creation of the world is seen as a linguistic process in which the Hebrew letters are thought of as both the creative forces and the material of which the world is created. The article analyses the main features of the symbolism of the divine names in medieval Kabbalah. We have identifi ed two main areas in the understanding of the divine names, peculiar to the two main schools of classical medieval Kabbalah — theosophical (theurgic and ecstatic (prophetic. The ideas of these schools are considered according to the works of two prominent kabbalists of the 13th c. — Joseph Gikatilla and Abraham Abulafi a. In the fi rst of these schools, knowing the names of God leads to the actualization of the latent mystical forces and results in a transformation and reintegration of our world and the world of the divine. This process, in turn, is understood as having an eschatological and messianic signifi cance. Abraham Abulafi a elaborated sophisticated practices of combining the divine names aimed at transforming the adept’s consciousness, its purifi cation and development of special mental abilities. At the end of the mystical path the practitioner achieves the state of prophecy and eventually merges with the Divine.

  2. Perovskite catalysts for oxidative coupling

    Science.gov (United States)

    Campbell, Kenneth D.

    1991-01-01

    Perovskites of the structure A.sub.2 B.sub.2 C.sub.3 O.sub.10 are useful as catalysts for the oxidative coupling of lower alkane to heavier hydrocarbons. A is alkali metal; B is lanthanide or lanthanum, cerium, neodymium, samarium, praseodymium, gadolinium or dysprosium; and C is titanium.

  3. Standardizing Naming Conventions in Radiation Oncology

    Energy Technology Data Exchange (ETDEWEB)

    Santanam, Lakshmi [Department of Radiation Oncology, Washington University School of Medicine, St. Louis, MO (United States); Hurkmans, Coen [Department of Radiation Oncology, Catharina Hospital, Eindhoven (Netherlands); Mutic, Sasa [Department of Radiation Oncology, Washington University School of Medicine, St. Louis, MO (United States); Vliet-Vroegindeweij, Corine van [Department of Radiation Oncology, Thomas Jefferson University Hospital, Philadelphia, PA (United States); Brame, Scott; Straube, William [Department of Radiation Oncology, Washington University School of Medicine, St. Louis, MO (United States); Galvin, James [Department of Radiation Oncology, Thomas Jefferson University Hospital, Philadelphia, PA (United States); Tripuraneni, Prabhakar [Department of Radiation Oncology, Scripps Clinic, LaJolla, CA (United States); Michalski, Jeff [Department of Radiation Oncology, Washington University School of Medicine, St. Louis, MO (United States); Bosch, Walter, E-mail: wbosch@radonc.wustl.edu [Department of Radiation Oncology, Washington University School of Medicine, St. Louis, MO (United States); Advanced Technology Consortium, Image-guided Therapy QA Center, St. Louis, MO (United States)

    2012-07-15

    Purpose: The aim of this study was to report on the development of a standardized target and organ-at-risk naming convention for use in radiation therapy and to present the nomenclature for structure naming for interinstitutional data sharing, clinical trial repositories, integrated multi-institutional collaborative databases, and quality control centers. This taxonomy should also enable improved plan benchmarking between clinical institutions and vendors and facilitation of automated treatment plan quality control. Materials and Methods: The Advanced Technology Consortium, Washington University in St. Louis, Radiation Therapy Oncology Group, Dutch Radiation Oncology Society, and the Clinical Trials RT QA Harmonization Group collaborated in creating this new naming convention. The International Commission on Radiation Units and Measurements guidelines have been used to create standardized nomenclature for target volumes (clinical target volume, internal target volume, planning target volume, etc.), organs at risk, and planning organ-at-risk volumes in radiation therapy. The nomenclature also includes rules for specifying laterality and margins for various structures. The naming rules distinguish tumor and nodal planning target volumes, with correspondence to their respective tumor/nodal clinical target volumes. It also provides rules for basic structure naming, as well as an option for more detailed names. Names of nonstandard structures used mainly for plan optimization or evaluation (rings, islands of dose avoidance, islands where additional dose is needed [dose painting]) are identified separately. Results: In addition to its use in 16 ongoing Radiation Therapy Oncology Group advanced technology clinical trial protocols and several new European Organization for Research and Treatment of Cancer protocols, a pilot version of this naming convention has been evaluated using patient data sets with varying treatment sites. All structures in these data sets were

  4. Standardizing Naming Conventions in Radiation Oncology

    International Nuclear Information System (INIS)

    Santanam, Lakshmi; Hurkmans, Coen; Mutic, Sasa; Vliet-Vroegindeweij, Corine van; Brame, Scott; Straube, William; Galvin, James; Tripuraneni, Prabhakar; Michalski, Jeff; Bosch, Walter

    2012-01-01

    Purpose: The aim of this study was to report on the development of a standardized target and organ-at-risk naming convention for use in radiation therapy and to present the nomenclature for structure naming for interinstitutional data sharing, clinical trial repositories, integrated multi-institutional collaborative databases, and quality control centers. This taxonomy should also enable improved plan benchmarking between clinical institutions and vendors and facilitation of automated treatment plan quality control. Materials and Methods: The Advanced Technology Consortium, Washington University in St. Louis, Radiation Therapy Oncology Group, Dutch Radiation Oncology Society, and the Clinical Trials RT QA Harmonization Group collaborated in creating this new naming convention. The International Commission on Radiation Units and Measurements guidelines have been used to create standardized nomenclature for target volumes (clinical target volume, internal target volume, planning target volume, etc.), organs at risk, and planning organ-at-risk volumes in radiation therapy. The nomenclature also includes rules for specifying laterality and margins for various structures. The naming rules distinguish tumor and nodal planning target volumes, with correspondence to their respective tumor/nodal clinical target volumes. It also provides rules for basic structure naming, as well as an option for more detailed names. Names of nonstandard structures used mainly for plan optimization or evaluation (rings, islands of dose avoidance, islands where additional dose is needed [dose painting]) are identified separately. Results: In addition to its use in 16 ongoing Radiation Therapy Oncology Group advanced technology clinical trial protocols and several new European Organization for Research and Treatment of Cancer protocols, a pilot version of this naming convention has been evaluated using patient data sets with varying treatment sites. All structures in these data sets were

  5. Standardizing naming conventions in radiation oncology.

    Science.gov (United States)

    Santanam, Lakshmi; Hurkmans, Coen; Mutic, Sasa; van Vliet-Vroegindeweij, Corine; Brame, Scott; Straube, William; Galvin, James; Tripuraneni, Prabhakar; Michalski, Jeff; Bosch, Walter

    2012-07-15

    The aim of this study was to report on the development of a standardized target and organ-at-risk naming convention for use in radiation therapy and to present the nomenclature for structure naming for interinstitutional data sharing, clinical trial repositories, integrated multi-institutional collaborative databases, and quality control centers. This taxonomy should also enable improved plan benchmarking between clinical institutions and vendors and facilitation of automated treatment plan quality control. The Advanced Technology Consortium, Washington University in St. Louis, Radiation Therapy Oncology Group, Dutch Radiation Oncology Society, and the Clinical Trials RT QA Harmonization Group collaborated in creating this new naming convention. The International Commission on Radiation Units and Measurements guidelines have been used to create standardized nomenclature for target volumes (clinical target volume, internal target volume, planning target volume, etc.), organs at risk, and planning organ-at-risk volumes in radiation therapy. The nomenclature also includes rules for specifying laterality and margins for various structures. The naming rules distinguish tumor and nodal planning target volumes, with correspondence to their respective tumor/nodal clinical target volumes. It also provides rules for basic structure naming, as well as an option for more detailed names. Names of nonstandard structures used mainly for plan optimization or evaluation (rings, islands of dose avoidance, islands where additional dose is needed [dose painting]) are identified separately. In addition to its use in 16 ongoing Radiation Therapy Oncology Group advanced technology clinical trial protocols and several new European Organization for Research and Treatment of Cancer protocols, a pilot version of this naming convention has been evaluated using patient data sets with varying treatment sites. All structures in these data sets were satisfactorily identified using this

  6. SNAD: sequence name annotation-based designer

    Directory of Open Access Journals (Sweden)

    Gorbalenya Alexander E

    2009-08-01

    Full Text Available Abstract Background A growing diversity of biological data is tagged with unique identifiers (UIDs associated with polynucleotides and proteins to ensure efficient computer-mediated data storage, maintenance, and processing. These identifiers, which are not informative for most people, are often substituted by biologically meaningful names in various presentations to facilitate utilization and dissemination of sequence-based knowledge. This substitution is commonly done manually that may be a tedious exercise prone to mistakes and omissions. Results Here we introduce SNAD (Sequence Name Annotation-based Designer that mediates automatic conversion of sequence UIDs (associated with multiple alignment or phylogenetic tree, or supplied as plain text list into biologically meaningful names and acronyms. This conversion is directed by precompiled or user-defined templates that exploit wealth of annotation available in cognate entries of external databases. Using examples, we demonstrate how this tool can be used to generate names for practical purposes, particularly in virology. Conclusion A tool for controllable annotation-based conversion of sequence UIDs into biologically meaningful names and acronyms has been developed and placed into service, fostering links between quality of sequence annotation, and efficiency of communication and knowledge dissemination among researchers.

  7. Kinetics of transesterification of methyl acetate and n-octanol catalyzed by cation exchange resins

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Yong; Gao, Li; Li, Xiying; Mao, Liqun [Henan University, Kaifeng (China); Wei, Min [Henan University of Technology, Zhengzhou (China)

    2013-05-15

    The transesterification kinetics of methyl acetate with n-octanol to octyl acetate and methanol were studied using Amberlyst 15 as catalyst in a batch stirred reactor. The influence of the agitation speed, particle size, temperature, catalyst loading, and initial reactants molar ratio was investigated in detail. A pseudo-homogeneous (PH) kinetic model was applied to correlate the experimental data in the temperature range of 313.15 K to 328.15 K. The estimated kinetic parameters made the calculated results in good agreement with the experimental data. A kinetic model describing the transesterification reaction catalyzed by cation exchange resins was developed.

  8. Tagging Named Entities in Croatian Tweets

    Directory of Open Access Journals (Sweden)

    Krešimir Baksa

    2017-01-01

    Full Text Available Named entity extraction tools designed for recognizing named entities in texts written in standard language (e.g., news stories or legal texts have been shown to be inadequate for user-generated textual content (e.g., tweets, forum posts. In this work, we propose a supervised approach to named entity recognition and classification for Croatian tweets. We compare two sequence labelling models: a hidden Markov model (HMM and conditional random fields (CRF. Our experiments reveal that CRF is the best model for the task, achieving a very good performance of over 87% micro-averaged F1 score. We analyse the contributions of different feature groups and influence of the training set size on the performance of the CRF model.

  9. English Shop Signs and Brand Names

    Directory of Open Access Journals (Sweden)

    Parvaneh Khosravizadeh

    2016-07-01

    Full Text Available The present study tries to investigate the people’s attitude to the use of English words in TV commercials, brand-naming and shop signs in Iran and specifically in Tehran where due to the fact that it is the capital, more English might be used for the sake of foreigners. The widespread use of English shop signs and English brand names for recently produced goodsdrove the researchers to investigate peoples’ attitude as consumers from two aspects of age and education. To reach the research goal, a questionnaire was devised and distributed to 100 people at random selection probing their attitudes while considering two factors of age and education. The result of the research will mostly benefit sociolinguists and business marketers.Keywords: age, education, advertising, brand-naming, shop signs, globalization

  10. Precedent Proper Names in Informal Oikonymy

    Directory of Open Access Journals (Sweden)

    Maria V. Akhmetova

    2013-06-01

    Full Text Available The paper deals with the Russian language informal city names (oikonyms motivated by other toponyms (with reference to Russia and the CIS. The author shows that the motivating proper name can replace the city name (e. g. Глазго < Glasgow ‘Glazov’ or contaminate with it (e. g. Экибостон < Ekibastuz + Boston, the “alien” onym being attracted to construct an informal oikonym due to its phonetic similarity or, on occasion, due to an affinity, either real or imaginary, between the two settlements. The author argues that the phonetic motivation is more characteristic for the modern urban tradition, than for popular dialects.

  11. Learning the Students' Names: Does it Matter?

    DEFF Research Database (Denmark)

    Jørgensen, Anker Helms

    2014-01-01

    on the effect of learning the students' names are sparse. Against this background, this paper reports on a method for learning all the students' names and two studies of the effect, based on my use of the method in my teaching. The two survey studies were carried in 2011 and in 2014. A survey was in the first...... sent to 50 students and I received 18 answers (38%). The second survey was sent to 86 students and I received 48 answers (56%). These figures provides a good indication.The answers showed a marked positive effect: the students felt welcome, accepted and respected; the learning environment was more......A key factor in successful teaching and learning is the relationship between the students and the teacher. A simple approach nurturing this relationship is learning the students' names. This is often suggested in the literature, but seems rarely practised. Substantial reports in the literature...

  12. North-American norms for name disagreement: pictorial stimuli naming discrepancies.

    Directory of Open Access Journals (Sweden)

    Mary O'Sullivan

    Full Text Available Pictorial stimuli are commonly used by scientists to explore central processes; including memory, attention, and language. Pictures that have been collected and put into sets for these purposes often contain visual ambiguities that lead to name disagreement amongst subjects. In the present work, we propose new norms which reflect these sources of name disagreement, and we apply this method to two sets of pictures: the Snodgrass and Vanderwart (S&V set and the Bank of Standardized Stimuli (BOSS. Naming responses of the presented pictures were classified within response categories based on whether they were correct, incorrect, or equivocal. To characterize the naming strategy where an alternative name was being used, responses were further divided into different sub-categories that reflected various sources of name disagreement. Naming strategies were also compared across the two sets of stimuli. Results showed that the pictures of the S&V set and the BOSS were more likely to elicit alternative specific and equivocal names, respectively. It was also found that the use of incorrect names was not significantly different across stimulus sets but that errors were more likely caused by visual ambiguity in the S&V set and by a misuse of names in the BOSS. Norms for name disagreement presented in this paper are useful for subsequent research for their categorization and elucidation of name disagreement that occurs when choosing visual stimuli from one or both stimulus sets. The sources of disagreement should be examined carefully as they help to provide an explanation of errors and inconsistencies of many concepts during picture naming tasks.

  13. Automatic Recognition of Object Names in Literature

    Science.gov (United States)

    Bonnin, C.; Lesteven, S.; Derriere, S.; Oberto, A.

    2008-08-01

    SIMBAD is a database of astronomical objects that provides (among other things) their bibliographic references in a large number of journals. Currently, these references have to be entered manually by librarians who read each paper. To cope with the increasing number of papers, CDS develops a tool to assist the librarians in their work, taking advantage of the Dictionary of Nomenclature of Celestial Objects, which keeps track of object acronyms and of their origin. The program searches for object names directly in PDF documents by comparing the words with all the formats stored in the Dictionary of Nomenclature. It also searches for variable star names based on constellation names and for a large list of usual names such as Aldebaran or the Crab. Object names found in the documents often correspond to several astronomical objects. The system retrieves all possible matches, displays them with their object type given by SIMBAD, and lets the librarian make the final choice. The bibliographic reference can then be automatically added to the object identifiers in the database. Besides, the systematic usage of the Dictionary of Nomenclature, which is updated manually, permitted to automatically check it and to detect errors and inconsistencies. Last but not least, the program collects some additional information such as the position of the object names in the document (in the title, subtitle, abstract, table, figure caption...) and their number of occurrences. In the future, this will permit to calculate the 'weight' of an object in a reference and to provide SIMBAD users with an important new information, which will help them to find the most relevant papers in the object reference list.

  14. Gene name ambiguity of eukaryotic nomenclatures.

    Science.gov (United States)

    Chen, Lifeng; Liu, Hongfang; Friedman, Carol

    2005-01-15

    With more and more scientific literature published online, the effective management and reuse of this knowledge has become problematic. Natural language processing (NLP) may be a potential solution by extracting, structuring and organizing biomedical information in online literature in a timely manner. One essential task is to recognize and identify genomic entities in text. 'Recognition' can be accomplished using pattern matching and machine learning. But for 'identification' these techniques are not adequate. In order to identify genomic entities, NLP needs a comprehensive resource that specifies and classifies genomic entities as they occur in text and that associates them with normalized terms and also unique identifiers so that the extracted entities are well defined. Online organism databases are an excellent resource to create such a lexical resource. However, gene name ambiguity is a serious problem because it affects the appropriate identification of gene entities. In this paper, we explore the extent of the problem and suggest ways to address it. We obtained gene information from 21 organisms and quantified naming ambiguities within species, across species, with English words and with medical terms. When the case (of letters) was retained, official symbols displayed negligible intra-species ambiguity (0.02%) and modest ambiguities with general English words (0.57%) and medical terms (1.01%). In contrast, the across-species ambiguity was high (14.20%). The inclusion of gene synonyms increased intra-species ambiguity substantially and full names contributed greatly to gene-medical-term ambiguity. A comprehensive lexical resource that covers gene information for the 21 organisms was then created and used to identify gene names by using a straightforward string matching program to process 45,000 abstracts associated with the mouse model organism while ignoring case and gene names that were also English words. We found that 85.1% of correctly retrieved mouse

  15. Cross domains Arabic named entity recognition system

    Science.gov (United States)

    Al-Ahmari, S. Saad; Abdullatif Al-Johar, B.

    2016-07-01

    Named Entity Recognition (NER) plays an important role in many Natural Language Processing (NLP) applications such as; Information Extraction (IE), Question Answering (QA), Text Clustering, Text Summarization and Word Sense Disambiguation. This paper presents the development and implementation of domain independent system to recognize three types of Arabic named entities. The system works based on a set of domain independent grammar-rules along with Arabic part of speech tagger in addition to gazetteers and lists of trigger words. The experimental results shown, that the system performed as good as other systems with better results in some cases of cross-domains corpora.

  16. Love me, love me not: changed names

    OpenAIRE

    2010-01-01

    Tiré du site Internet de Onestar Press: " A selection of 150 cities within Slavs and Tatars’ Eurasian remit, Love Me, Love Me Not : Changed Names plucks the petals off the past to reveal an impossibly thorny stem : a lineage of names changed by the course of the region’s grueling history. Some cities divulge a resolutely Asian heritage, so often forgotten in today’s quest, at all costs, for European integration. Some vacillate almost painfully, and others with numbing repetition, entire metro...

  17. Centrally managed name resolution schemes for EPICS

    International Nuclear Information System (INIS)

    Jun, D.

    1997-01-01

    The Experimental Physics and Industrial Control System (EPICS) uses a broadcast method to locate resources and controls distributed across control servers. There are many advantages offered by using a centrally managed name resolution method, in which resources are located using a repository. The suitability of DCE Directory Service as a name resolution method is explored, and results from a study involving DCE are discussed. An alternative nameserver method developed and in use at the Thomas Jefferson national Accelerator Facility (Jefferson Lab) is described and results of integrating this new method with existing EPICS utilities presented. The various methods discussed in the paper are compared

  18. [Why the name "Erasmus" for an hospital ?

    Science.gov (United States)

    Noterman, J

    2017-01-01

    Why the name "Erasmus" for an hospital ? Apart for local circumstances, there are far more obvious reasons for this choice. Erasmus was in close contact with the medical world. Indeed, he suffered all his life from more or less severe diseases and had therefore frequent contacts with doctors. Also, the ideas he was defending stood for the principle of free inquiry before its time. For these various reasons giving the name « Erasmus » to the university clinics of the Free University of Brussels (ULB) was a judicious choise.

  19. Automotive Catalyst State Diagnosis Using Microwaves

    Directory of Open Access Journals (Sweden)

    Moos Ralf

    2015-01-01

    Full Text Available The state of catalysts plays a key role in automotive exhaust gas aftertreatment. The soot or ash loading of Diesel particulate filters, the oxygen loading degree in three-way catalysts, the amount of stored ammonia in SCR catalysts, or the NOx loading degree in NOx storage catalysts are important parameters that are today determined indirectly and in a model-based manner with gas sensors installed upstream and/or downstream of the catalysts. This contribution gives an overview on a novel approach to determine the catalyst state directly by a microwave-based technique. The method exploits the fact that the catalyst housing acts as a microwave cavity resonator. As “sensing” elements, one or two simple antennas are mounted inside the catalyst canning. The electrical properties of the catalyst device (ceramic honeycomb plus coating and storage material can be measured. Preferably, the resonance characteristics, e.g., the resonance frequencies, of selected cavity modes are observed. The information on the catalyst interior obtained in such a contactless manner is very well correlated with the catalyst state as will be demonstrated for different exhaust gas aftertreatment systems.

  20. Rejuvenation of the SCR catalyst at Mehrum

    Energy Technology Data Exchange (ETDEWEB)

    Nagai, Y.; Inatsume, Y.; Morita, I.; Kato, Y.; Yokoyama, K.; Ito, K. [Babcock Hitachi K.K., Kure-shi, Hiroshima-ken (Japan)

    2004-07-01

    Babcock Hitachi K.K. (BHK) received the contract of the rejuvenation of the SCR catalyst at the 750 MW coal-fired Mehrum Power Station (in Hohenhameln, Germany) in March 2003. The contractual coverage was 160 m{sup 3} of the entire catalyst layer. The catalyst, which had been in operation for 16 years since 1987, was originally supplied by BHK. The rejuvenation process developed for the Mehrum project consisted of two major steps: the first is to dust off the catalyst and remove the catalyst poison, and the second step is to add active material to enhance the catalyst activity. The catalyst must be dried after each washing. In order to minimize transportation cost and time, the rejuvenation work was done at the Mehrum station site. The scope of the rejuvenation work was shared between the owner and BHK. It took about one and a half months to complete the (total) on-site rejuvenation worked. The performance of the rejuvenated catalyst was superior to show the same level of activity as the unused catalyst and maintain the same SO{sub 2} conversion rate as the spent catalyst. This paper gives the details of the spent coal-fired SCR catalyst rejuvenation work. 13 figs., 1 tab.

  1. Hydroprocessing using regenerated spent heavy hydrocarbon catalyst

    International Nuclear Information System (INIS)

    Clark, F.T.; Hensley, A.L. Jr.

    1992-01-01

    This patent describes a process for hydroprocessing a hydrocarbon feedstock. It comprises: contacting the feedstock with hydrogen under hydroprocessing conditions with a hydroprocessing catalyst wherein the hydroprocessing catalyst contains a total contaminant metals build-up of greater than about 4 wt. % nickel plus vanadium, a hydrogenation component selected from the group consisting of Group VIB metals and Group VIII metals and is regenerated spent hydroprocessing catalyst regenerated by a process comprising the steps: partially decoking the spent catalyst in an initial coke-burning step; impregnating the partially decoked catalyst with a Group IIA metal-containing impregnation solution; and decoking the impregnated catalyst in a final coke-burning step wherein the impregnated catalyst is contacted with an oxygen-containing gas at a temperature of about 600 degrees F to about 1400 degrees F

  2. Autothermal reforming catalyst having perovskite structure

    Science.gov (United States)

    Krumpel, Michael [Naperville, IL; Liu, Di-Jia [Naperville, IL

    2009-03-24

    The invention addressed two critical issues in fuel processing for fuel cell application, i.e. catalyst cost and operating stability. The existing state-of-the-art fuel reforming catalyst uses Rh and platinum supported over refractory oxide which add significant cost to the fuel cell system. Supported metals agglomerate under elevated temperature during reforming and decrease the catalyst activity. The catalyst is a perovskite oxide or a Ruddlesden-Popper type oxide containing rare-earth elements, catalytically active firs row transition metal elements, and stabilizing elements, such that the catalyst is a single phase in high temperature oxidizing conditions and maintains a primarily perovskite or Ruddlesden-Popper structure under high temperature reducing conditions. The catalyst can also contain alkaline earth dopants, which enhance the catalytic activity of the catalyst, but do not compromise the stability of the perovskite structure.

  3. Isotope exchange in oxide-containing catalyst

    Science.gov (United States)

    Brown, Kenneth G. (Inventor); Upchurch, Billy T. (Inventor); Hess, Robert V. (Inventor); Miller, Irvin M. (Inventor); Schryer, David R. (Inventor); Sidney, Barry D. (Inventor); Wood, George M. (Inventor); Hoyt, Ronald F. (Inventor)

    1989-01-01

    A method of exchanging rare-isotope oxygen for common-isotope oxygen in the top several layers of an oxide-containing catalyst is disclosed. A sample of an oxide-containing catalyst is exposed to a flowing stream of reducing gas in an inert carrier gas at a temperature suitable for the removal of the reactive common-isotope oxygen atoms from the surface layer or layers of the catalyst without damaging the catalyst structure. The reduction temperature must be higher than any at which the catalyst will subsequently operate. Sufficient reducing gas is used to allow removal of all the reactive common-isotope oxygen atoms in the top several layers of the catalyst. The catalyst is then reoxidized with the desired rare-isotope oxygen in sufficient quantity to replace all of the common-isotope oxygen that was removed.

  4. Catalyst for Carbon Monoxide Oxidation

    Science.gov (United States)

    Davis, Patricia; Brown, Kenneth; VanNorman, John; Brown, David; Upchurch, Billy; Schryer, David; Miller, Irvin

    2010-01-01

    In many applications, it is highly desirable to operate a CO2 laser in a sealed condition, for in an open system the laser requires a continuous flow of laser gas to remove the dissociation products that occur in the discharge zone of the laser, in order to maintain a stable power output. This adds to the operating cost of the laser, and in airborne or space applications, it also adds to the weight penalty of the laser. In a sealed CO2 laser, a small amount of CO2 gas is decomposed in the electrical discharge zone into corresponding quantities of CO and O2. As the laser continues to operate, the concentration of CO2 decreases, while the concentrations of CO and O2 correspondingly increase. The increasing concentration of O2 reduces laser power, because O2 scavenges electrons in the electrical discharge, thereby causing arcing in the electric discharge and a loss of the energetic electrons required to boost CO2 molecules to lasing energy levels. As a result, laser power decreases rapidly. The primary object of this invention is to provide a catalyst that, by composition of matter alone, contains chemisorbed water within and upon its structure. Such bound moisture renders the catalyst highly active and very long-lived, such that only a small quantity of it needs to be used with a CO2 laser under ambient operating conditions. This object is achieved by a catalyst that consists essentially of about 1 to 40 percent by weight of one or more platinum group metals (Pt, Pd, Rh, Ir, Ru, Os, Pt being preferred); about 1 to 90 percent by weight of one or more oxides of reducible metals having multiple valence states (such as Sn, Ti, Mn, Cu, and Ce, with SnO2 being preferred); and about 1 to 90 percent by weight of a compound that can bind water to its structure (such as silica gel, calcium chloride, magnesium sulfate, hydrated alumina, and magnesium perchlorate, with silica gel being preferred). Especially beneficial results are obtained when platinum is present in the

  5. On identifying name equivalences in digital libraries. Name equivalence, Surname matching, Author identification, Databases

    Directory of Open Access Journals (Sweden)

    Dror G. Feitelson

    2004-01-01

    Full Text Available The services provided by digital libraries can be much improved by correctly identifying variants of the same name. For example, this will allow for better retrieval of all the works by a certain author. We focus on variants caused by abbreviations of first names, and show that significant achievements are possible by simple lexical analysis and comparison of names. This is done in two steps: first a pairwise matching of names is performed, and then these are used to find cliques of equivalent names. However, these steps can each be performed in a variety of ways. We therefore conduct an experimental analysis using two real datasets to find which approaches actually work well in practice. Interestingly, this depends on the size of the repository, as larger repositories may have many more similar names.

  6. On streamlining the Ukrainian names of plants. Information 7. Spelling the names of plant varieties.

    Directory of Open Access Journals (Sweden)

    В. М. Меженський

    2016-07-01

    Full Text Available Purpose. To analyse the practice of transliteration of the Ukrainian cultivar names and rendering foreign names by means of the Ukrainian language, as well as special aspects of cultivar names spelling in special literature. Results. Cultivar names as a special category require preservation of primary graphics or sound type in the other language. This can be achieved by direct inclusion of the original name to the Ukrainian text or by practical transcribing, but not by transliteration or translation. Otherwise, Ukrainian names should be transliterated for inclusion to the texts in Latin characters. Transcription/transliteration in both directions is performed from the source language, though, as practice shows, in some Ukrainian publications the Russian is wrongly used as an intermediary language. Some national scientific publications ignore the recommendations of the International Code of Nomenclature for Cultivated Plants that is not conducive to the success of scientific communication in the globalized world. Conclusions. The foreign names of plant varieties should be entered into the Ukrainian text keeping the original spelling or by means of practical transcription. The loan of foreign names is performed by transcribing directly from the source language; if the language doesn’t have the Latin alphabet, Latinized name transcription is acceptable. Recommendations of the International Code of Nomenclature for Cultivated Plants that concern graphic highlighting of the cultivar names in the text enclosing them in single quotation marks and writing each word of a cultivar name with a capital letter should necessarily be applied in the foreign-language publications and extended to the Ukrainian special literature, at least, in terms of the use of single quotation marks. Ukrainian names should be transliterated only in accordance with the regulations.

  7. What's in a Name? Interlocutors Dynamically Update Expectations about Shared Names.

    Science.gov (United States)

    Gegg-Harrison, Whitney M; Tanenhaus, Michael K

    2016-01-01

    In order to refer using a name, speakers must believe that their addressee knows about the link between the name and the intended referent. In cases where speakers and addressees learned a subset of names together, speakers are adept at using only the names their partner knows. But speakers do not always share such learning experience with their conversational partners. In these situations, what information guides speakers' choice of referring expression? A speaker who is uncertain about a names' common ground (CG) status often uses a name and description together. This N+D form allows speakers to demonstrate knowledge of a name, and could provide, even in the absence of miscommunication, useful evidence to the addressee regarding the speaker's knowledge. In cases where knowledge of one name is associated with knowledge of other names, this could provide indirect evidence regarding knowledge of other names that could support generalizations used to update beliefs about CG. Using Bayesian approaches to language processing as a guiding framework, we predict that interlocutors can use their partner's choice of referring expression, in particular their use of an N+D form, to generate more accurate beliefs regarding their partner's knowledge of other names. In Experiment 1, we find that domain experts are able to use their partner's referring expression choices to generate more accurate estimates of CG. In Experiment 2, we find that interlocutors are able to infer from a partner's use of an N+D form which other names that partner is likely to know or not know. Our results suggest that interlocutors can use the information conveyed in their partner's choice of referring expression to make generalizations that contribute to more accurate beliefs about what is shared with their partner, and further, that models of CG for reference need to account not just for the status of referents, but the status of means of referring to those referents.

  8. Apparatus Named after Our Academic Ancestors, III

    Science.gov (United States)

    Greenslade, Thomas B., Jr.

    2014-01-01

    My academic ancestors in physics have called on me once more to tell you about the apparatus that they devised, and that many of you have used in your demonstrations and labs. This article is about apparatus named after François Arago, Heinrich Helmholtz, Leon Foucault, and James Watt.

  9. Predictable Locations Aid Early Object Name Learning

    Science.gov (United States)

    Benitez, Viridiana L.; Smith, Linda B.

    2012-01-01

    Expectancy-based localized attention has been shown to promote the formation and retrieval of multisensory memories in adults. Three experiments show that these processes also characterize attention and learning in 16- to 18-month old infants and, moreover, that these processes may play a critical role in supporting early object name learning. The…

  10. Measuring the global domain name system

    NARCIS (Netherlands)

    Casalicchio, E.; Shen, Xuemin; Caselli, M.; Coletta, A.

    2013-01-01

    The Internet is a worldwide distributed critical infrastructure, and it is composed of many vital components. While IP routing is the most important service, today the Domain Name System can be classified as the second most important, and has been defined as a critical infrastructure as well. DNS

  11. Implementing XML Schema Naming and Design Rules

    Energy Technology Data Exchange (ETDEWEB)

    Lubell, Joshua [National Institute of Standards and Technology (NIST); Kulvatunyou, Boonserm [ORNL; Morris, Katherine [National Institute of Standards and Technology (NIST); Harvey, Betty [Electronic Commerce Connection, Inc.

    2006-08-01

    We are building a methodology and tool kit for encoding XML schema Naming and Design Rules (NDRs) in a computer-interpretable fashion, enabling automated rule enforcement and improving schema quality. Through our experience implementing rules from various NDR specifications, we discuss some issues and offer practical guidance to organizations grappling with NDR development.

  12. Griffon – what's in a name?

    African Journals Online (AJOL)

    Campbell Murn

    genus name of Gyps for Gyps vulgaris [= G.fulvus], which he ... Appendix to this note my translation of Perrault's article; curiously he ... My translation of Mr. Perrault's article. ANATOMICAL DESCRIPTION OF. TWO GRIFONS. The description that previous. Authors made of the Grifon does not fit any known animal: besides the.

  13. Named entity normalization in user generated content

    NARCIS (Netherlands)

    Jijkoun, V.; Khalid, M.A.; Marx, M.; de Rijke, M.

    2008-01-01

    Named entity recognition is important for semantically oriented retrieval tasks, such as question answering, entity retrieval, biomedical retrieval, trend detection, and event and entity tracking. In many of these tasks it is important to be able to accurately normalize the recognized entities,

  14. Cognitive Predictors of Rapid Picture Naming

    Science.gov (United States)

    Decker, Scott L.; Roberts, Alycia M.; Englund, Julia A.

    2013-01-01

    Deficits in rapid automatized naming (RAN) have been found to be a sensitive cognitive marker for children with dyslexia. However, there is a lack of consensus regarding the construct validity and theoretical neuro-cognitive processes involved in RAN. Additionally, most studies investigating RAN include a narrow range of cognitive measures. The…

  15. Registering Names and Addresses for Information Technology.

    Science.gov (United States)

    Knapp, Arthur A.

    The identification of administrative authorities and the development of associated procedures for registering and accessing names and addresses of communications data systems are considered in this paper. It is noted that, for data communications systems using standards based on the Open Systems Interconnection (OSI) Reference Model specified by…

  16. Spatial Planning: What's in a Name?

    NARCIS (Netherlands)

    Faludi, A.K.F.

    2003-01-01

    Spatial Planning: What's in a Name? Andreas Faludi, University of Nijmegen Spatial planning is Euro-English and means different things to different people. In the UK it now carries the connotation of 'Modernising Planning', taking it beyond land-use management. In the EU context ,too, regulatory and

  17. Naming Speed in Dyslexia and Dyscalculia

    Science.gov (United States)

    Willburger, Edith; Fussenegger, Barbara; Moll, Kristina; Wood, Guilherme; Landerl, Karin

    2008-01-01

    In four carefully selected samples of 8- to 10-year old children with dyslexia (but age adequate arithmetic skills), dyscalculia (but age adequate reading skills), dyslexia/dyscalculia and controls a domain-general deficit in rapid automatized naming (RAN) was found for both dyslexia groups. Dyscalculic children exhibited a domain-specific deficit…

  18. Biggert named chairman of energy subcommittee

    CERN Multimedia

    2003-01-01

    U.S. Representative Judy Biggert has been named Chairman of the Energy Subcommittee of the House Science Committee, a key panel with jurisdiction over the federal government's civilian energy and science research activities, including the work done at Argonne and Fermilab (1 page).

  19. PS, SL and LHC Auditoria change names

    CERN Multimedia

    2003-01-01

    Following the replacement of the PS, SL and LHC Divisions by the AB and AT Divisions, the Auditoria are also changing their names. PS Auditorium is renamed AB Meyrin SL Auditorium is renamed AB Prévessin LHC Auditorium is renamed AT

  20. Degradation forecast for PEMFC cathode-catalysts under cyclic loads

    Science.gov (United States)

    Moein-Jahromi, M.; Kermani, M. J.; Movahed, S.

    2017-08-01

    Degradation of Fuel Cell (FC) components under cyclic loads is one of the biggest bottlenecks in FC commercialization. In this paper, a novel experimental based algorithm is presented to predict the Catalyst Layer (CL) performance loss during cyclic load. The algorithm consists of two models namely Models 1 and 2. The Model 1 calculates the Electro-Chemical Surface Area (ECSA) and agglomerate size (e.g. agglomerate radius, rt,agg) for the catalyst layer under cyclic load. The Model 2 is the already-existing model from our earlier studies that computes catalyst performance with fixed structural parameters. Combinations of these two Models predict the CL performance under an arbitrary cyclic load. A set of parametric/sensitivity studies is performed to investigate the effects of operating parameters on the percentage of Voltage Degradation Rate (VDR%) with rank 1 for the most influential one. Amongst the considered parameters (such as: temperature, relative humidity, pressure, minimum and maximum voltage of the cyclic load), the results show that temperature and pressure have the most and the least influences on the VDR%, respectively. So that, increase of temperature from 60 °C to 80 °C leads to over 20% VDR intensification, the VDR will also reduce 1.41% by increasing pressure from 2 atm to 4 atm.

  1. What’s In Your Name? Associated Meanings of the Common Filipino Names Among Young Filipinos

    Directory of Open Access Journals (Sweden)

    Shaira G. Castillo

    2016-11-01

    Full Text Available Name is important in knowing someone’s identity. By a person’s name someone can know his or her character. It is also possible that they bear a particular name because of their background and other factors that can lead to something important. This study aimed to find out the associative meanings of the most common Filipino male and female names among the Polytechnic University of the Philippines-Sta. Mesa students. Different factors such as character traits, physical appearance, and skills/talents were considered in determining meanings of the names. The study used quantitative and qualitative research approach, specifically the descriptive method, to analyze the gathered data. A selfadministered survey was distributed to 400 randomly selected respondents. General findings revealed that the respondents associated the most common Filipino male names in the same way regarding character traits and skills/talents. However, they have different associations to the male names in terms of physical appearance. On the other hand, the respondents associated the most common Filipino female names into similar character traits and physical appearance but associated them with different skills/talents. Results also revealed that the most common factors that influence the respondents’ associated meanings were relationships, experiences, popularity, and perception. The results imply that while young Filipinos associate similar character traits, physical appearances and skills to common Filipino names, they have different reasons in giving meanings to them.

  2. 27 CFR 41.251 - Change in name.

    Science.gov (United States)

    2010-04-01

    ... corporate name. When there is a change in the corporate name of an importer of processed tobacco, the... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Change in name. 41.251... name. (a) Change in individual name. When there is a change in the name of an individual operating...

  3. Cognitive abilities and creating metaphorical names

    Directory of Open Access Journals (Sweden)

    Avanesyan, Marina O.

    2016-06-01

    Full Text Available The cognitive processing of metaphor creation has been insufficiently investigated. Creating metaphors requires the ability to work in a fantastic, impossible context, using symbolic and associative means to express oneís thoughts. It has been shown recently that intelligence plays an important role in the creation of metaphors, but it is not the main factor in determining their success. The present research explores the roles of conceptual abilities, categorical abilities, and flexibility (as the factor creativity in metaphor creation. Participants (n = 38 young adults were asked to come up with names for three photos, without any special instruction to create metaphors. To classify conceptual abilities we used ìConceptual Synthesisî (M. A. Kholodnaya, 2012; to measure categorical ability we used the subtest ìSimilaritiesî (D. Wechsler, 1955; to identify the role of creativity in the metaphor process we used the test of ìUnusual Usesî (J. P. Guilford, 1960. The creation of complex metaphorical names was associated with a tendency to create highly organized mental structures and to retain them within the general semantic context (r = 0.344, p < 0.05. The tendency to create single-level situational connections was associated with a tendency to give specific names to photos (r = 0.475, p < 0.01. Photographic images proved out to be fruitful stimuli to investigate the processing of visual information. We developed a preliminary classification of names: 1 concrete; 2 situational; 3 abstract; 4 metaphorical (M1 and M2. We identified two types of metaphorical names — perceptual and complex metaphors — that relate to conceptual abilities in different ways. It is inaccurate to speak about a general concept of ìmetaphorical abilitiesî; we should differentiate the psychological mechanisms that lie at their base.

  4. Kinetic study of the hydration of propylene oxide in the presence of heterogeneous catalyst

    Directory of Open Access Journals (Sweden)

    Akyalcin Sema

    2017-01-01

    Full Text Available The kinetics of the hydration of propylene oxide was studied using a pressurized batch reactor for both uncatalyzed and heterogeneously catalyzed reactions. Lewatit MonoPlus M500/HCO3 - was used as heterogeneous catalyst, which showed better performance than Dowex Marathon A/HCO3 -. The effects of the parameters, namely internal and external diffusion resistances, temperature, catalyst loading and mole ratios of reactants, on the reaction rate were studied. The uncatalyzed and heterogeneously catalyzed reactions were proven to follow a series-parallel irreversible homogeneous mechanism. The temperature dependencies of the rate constants appearing in the rate expressions were determined.

  5. The List of Available Names (LAN): A new generation for stable taxonomic names in zoology?

    Science.gov (United States)

    Alonso-Zarazaga, Miguel A; Fautin, Daphne Gail; Michel, Ellinor

    2016-01-01

    The List of Available Names in Zoology (LAN) is an inventory of names with specific scope in time and content, presented and approved in parts, and constituted as a cumulative index of names available for use in zoological nomenclature. It was defined in Article 79 in the fourth edition of the International Code of Zoological Nomenclature. The LAN is likely to gain importance with the development of the online Official Registry for Zoological Nomenclature (ZooBank) as it is potentially a source of many nomenclaturally certified names. Article 79 describes the deliberative process for adding large numbers of names to the LAN simultaneously, detailing steps and chronology for submission of a candidate Part to the LAN and consideration of a candidate Part by the public and Commission, but it is largely mute about the contents of a candidate Part. It does make clear that a name within the scope of a Part but not on the LAN has no nomenclatural standing, even if it had previously been considered available, thereby preventing long-forgotten names from displacing accepted ones and the accumulation of nomina dubia. Thus, for taxa on the LAN, nomenclatural archaeology - the resurrecting of old unused names to replace by priority names in current usage - will not be worthwhile. Beyond that, it has been unclear if Article 79 is intended to document every available name known within the scope of the Part, or if its intention is to pare the inventory of available names within the scope of the Part. Consideration by the Commission and two committees to deal with the LAN have defined steps to implement Article 79 with the latter intent. Procedures for consideration of a candidate Part are defined in a manual, published as an appendix in this volume.

  6. What's in a Name? Interlocutors dynamically update expectations about shared names

    Directory of Open Access Journals (Sweden)

    Whitney Marie Gegg-Harrison

    2016-02-01

    Full Text Available In order to refer using a name, speakers must know that their addressee knows about the link between the name and the intended referent. In cases where speakers and addressees learned names together, speakers are adept at using names only when their addressee knows them. But speakers do not always share such learning experience with their conversational partners. In these situations, what information guides speakers’ choice of referring expression? A speaker who is uncertain about a names’ common ground (CG status often uses a name and description together. This N+D form allows speakers to demonstrate knowledge of a name, and could provide, even in the absence of miscommunication, useful evidence to the addressee regarding the speaker’s knowledge. In cases where knowledge of one name is associated with knowledge of other names, could provide indirect evidence regarding knowledge of other names that could support generalizations used to update beliefs about CG. Using data explanation approaches to language processing as a guiding framework, we predict that interlocutors can use their partner’s choice of referring expression, in particular their use of an N+D form, to generate more accurate beliefs regarding their partner’s knowledge of other names. In Experiment 1, we find that domain experts are able to use their partner’s referring expression choices to generate more accurate estimates of CG. In Experiment 2, we find that interlocutors are able to infer from a partner’s use of an N+D form which other names that partner is likely to know or not know. Our results suggest that interlocutors can use the information conveyed in their partner’s choice of referring expression to make generalizations that contribute to more accurate beliefs about what is shared with their partner, and further, that models of CG for reference need to account not just for the status of referents, but the status of means of referring to those referents.

  7. Dimethyl carbonate synthesis via transesterification of propylene carbonate with methanol by ceria-zinc catalysts: Role of catalyst support and reaction parameters

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, Praveen; Srivastava, Vimal Chandra; Mishra, Indra Mani [Indian Institute of Technology Roorkee, Roorkee 247667, Uttarakhand (India)

    2015-09-15

    Ceria and zinc oxide catalyst were impregnated onto various oxide supports, namely Al{sub 2}O{sub 3}, TiO{sub 2} and SiO{sub 2}, individually by deposition-coprecipitation method. The synthesized catalysts (CZA, CZS and CZT having supports Al{sub 2}O{sub 3}, TiO{sub 2} and SiO{sub 2}, respectively) were characterized by X-ray diffraction (XRD), NH{sub 3}- and CO{sub 2}-temperature programmed desorption (TPD) and N2 adsorption. These catalysts were used for synthesis of dimethyl carbonate (DMC) from methanol and propylene carbonate in a batch reactor. CZS was found to have larger average grain size as compared to CZA and CZT. Composite oxides (catalysts) were found to contain individual phases of ZnO, CeO{sub 2} and some spinel forms of Zn, Ce along with their supports. CZS having highest basicity and surface area showed better catalytic activity as compared to CZA and CZT. Effect of reaction temperature and methanol/PC molar ratio on DMC yield was studied and a reaction mechanism has been discussed. Maximum DMC yield of 77% was observed with CZS catalyst at 170 .deg. C with methanol/PC molar ratio of 10.

  8. Recombination Catalysts for Hypersonic Fuels

    Science.gov (United States)

    Chinitz, W.

    1998-01-01

    The goal of commercially-viable access to space will require technologies that reduce propulsion system weight and complexity, while extracting maximum energy from the products of combustion. This work is directed toward developing effective nozzle recombination catalysts for the supersonic and hypersonic aeropropulsion engines used to provide such access to space. Effective nozzle recombination will significantly reduce rk=le length (hence, propulsion system weight) and reduce fuel requirements, further decreasing the vehicle's gross lift-off weight. Two such catalysts have been identified in this work, barium and antimony compounds, by developing chemical kinetic reaction mechanisms for these materials and determining the engine performance enhancement for a typical flight trajectory. Significant performance improvements are indicated, using only 2% (mole or mass) of these compounds in the combustor product gas.

  9. HZSM-5 Catalyst for Cracking Palm Oil to Gasoline: A Comparative Study with and without Impregnation

    Directory of Open Access Journals (Sweden)

    Achmad Roesyadi

    2013-03-01

    Full Text Available It is important to develop a renewable source of energy to overcome a limited source fossil energy. Palm oil is a potential alternative and environmental friendly energy resource in Indonesia due to high production capacity of this vegetable oil. The research studied effect of catalyst to selectivity of biofuel product from cracking of palm oil. The catalyst consisted of HZSM-5 catalyst with or without impregnation. The research was conducted in two steps, namely catalyst synthesized and catalytic cracking process. HZSM-5 was synthesized using Plank methods. The characterization of the synthesized catalysts used AAS (Atomic Absorption Spectroscopy and BET (Brunaueur Emmet Teller. The cracking was carried out in a fixed bed microreactor with diameter of 1 cm and length of 16 cm which was filled with 0.6 gram catalyst. The Zn/HZSM-5 catalyst was recommended for cracking palm oil for the high selectivity to gasoline. © 2013 BCREC UNDIP. All rights reserved.(Selected Paper from International Conference on Chemical and Material Engineering (ICCME 2012Received: 28th September 2012; Revised: 19th November 2012; Accepted: 20th December 2012[How to Cite: A. Roesyadi, D. Hariprajitno, N. Nurjannah, S.D. Savitri, (2013. HZSM-5 Catalyst for Cracking Palm Oil to Gasoline: A Comparative Study with and without Impregnation. Bulletin of Chemical Reaction Engineering & Catalysis, 7 (3: 185-190.(doi:10.9767/bcrec.7.3.4045.185-190][Permalink/DOI: http://dx.doi.org/10.9767/bcrec.7.3.4045.185-190 ] View in  |

  10. Catalyst for Expanding Human Spaceflight

    Science.gov (United States)

    Lueders, Kathryn L.

    2014-01-01

    History supplies us with many models of how and how not to commercialize an industry. This presentation draws parallels between industries with government roots, like the railroad, air transport, communications and the internet, and NASAs Commercial Crew Program. In these examples, government served as a catalyst for what became a booming industry. The building block approach the Commercial Crew Program is taking is very simple -- establish a need, laying the groundwork, enabling industry and legal framework.

  11. Alternative alkali resistant deNOx catalysts

    DEFF Research Database (Denmark)

    Putluru, Siva Sankar Reddy; Kristensen, Steffen Buus; Due-Hansen, Johannes

    2012-01-01

    by onepot sol–gel method. All catalysts were characterized by BET, XRPD and NH3-TPD. Initial SCR activities of 8 out of 9 catalysts showed higher NO conversion at least at one temperature in the temperature range 300–500 ◦C compared to the conventional V2O5-WO3/TiO2 catalyst. After potassium poisoning (100......Alternative alkali resistant deNOx catalysts were prepared using three different supports ZrO2, TiO2 and Mordenite zeolite. The majority of the catalysts were prepared by incipient wetness impregnation of a commercial support, with vanadium, copper or iron precursor, one catalyst was prepared......–130 µmol of K/g of catalyst) the relative drop in SCR activity and acidity was lower for all the alternative catalysts compared to the industrial V2O5-WO3/TiO2 catalyst. Furthermore, Cu/MOR and Nano-V2O5/Sul-TiO2 catalysts showed 8–16 times higher SCR activities than the conventional even after high...

  12. What's in a Name? For A Million Bucks or So, You can Name that School

    Science.gov (United States)

    Altbach, Philip G.

    2006-01-01

    Although "naming rights" have proliferated in American higher education for the past several decades, the phenomenon has recently expanded to extraordinary lengths. In this area, academe fits right in with the larger culture, which has named everything from AutoZone Park to Gillette Stadium to the children's wing of your local hospital. Anything…

  13. A Doctor's Name as a Brand: A Nationwide Survey on Registered Clinic Names in Taiwan.

    Science.gov (United States)

    Chu, Feng-Yuan; Dai, Ying-Xiu; Liu, Jui-Yao; Chen, Tzeng-Ji; Chou, Li-Fang; Hwang, Shinn-Jang

    2018-06-01

    In countries where the private clinics of physicians can be freely named, registering a clinic with a physician's name is one way to make patients familiar with the physician. No previous study had investigated how clinics make use of this method of personal branding. Therefore, the current study analyzed 10,847 private physician Western medicine clinics in Taiwan. Of those clinics, 31.0% ( n = 3363) were named with a physician's full name, 8.9% ( n = 960) with a surname, and 8.1% ( n = 884) with a given name. The proportion of clinics registered with a physician's name was lower in rural areas (37.3%) than in urban (48.5%) and suburban areas (49.2%), respectively. Among clinics with only one kind of specialist, a physician's name was used most frequently in clinics of obstetrics and gynecology (64.9%), otorhinolaryngology (64.1%), and dermatology (63.4%). In Taiwan, fewer than half of clinics used a physician's name as a brand. The sociocultural or strategic factors and real benefits of doing so could be further studied in the future for a better understanding of healthcare services management.

  14. Family-group names in Coleoptera (Insecta)

    Science.gov (United States)

    Bouchard, Patrice; Bousquet, Yves; Davies, Anthony E.; Alonso-Zarazaga, Miguel A.; Lawrence, John F.; Lyal, Chris H. C.; Newton, Alfred F.; Reid, Chris A. M.; Schmitt, Michael; Ślipiński, S. Adam; Smith, Andrew B. T.

    2011-01-01

    Abstract We synthesize data on all known extant and fossil Coleoptera family-group names for the first time. A catalogue of 4887 family-group names (124 fossil, 4763 extant) based on 4707 distinct genera in Coleoptera is given. A total of 4492 names are available, 183 of which are permanently invalid because they are based on a preoccupied or a suppressed type genus. Names are listed in a classification framework. We recognize as valid 24 superfamilies, 211 families, 541 subfamilies, 1663 tribes and 740 subtribes. For each name, the original spelling, author, year of publication, page number, correct stem and type genus are included. The original spelling and availability of each name were checked from primary literature. A list of necessary changes due to Priority and Homonymy problems, and actions taken, is given. Current usage of names was conserved, whenever possible, to promote stability of the classification. New synonymies (family-group names followed by genus-group names): Agronomina Gistel, 1848 syn. nov. of Amarina Zimmermann, 1832 (Carabidae), Hylepnigalioini Gistel, 1856 syn. nov. of Melandryini Leach, 1815 (Melandryidae), Polycystophoridae Gistel, 1856 syn. nov. of Malachiinae Fleming, 1821 (Melyridae), Sclerasteinae Gistel, 1856 syn. nov. of Ptilininae Shuckard, 1839 (Ptinidae), Phloeonomini Ádám, 2001 syn. nov. of Omaliini MacLeay, 1825 (Staphylinidae), Sepedophilini Ádám, 2001 syn. nov. of Tachyporini MacLeay, 1825 (Staphylinidae), Phibalini Gistel, 1856 syn. nov. of Cteniopodini Solier, 1835 (Tenebrionidae); Agronoma Gistel 1848 (type species Carabus familiaris Duftschmid, 1812, designated herein) syn. nov. of Amara Bonelli, 1810 (Carabidae), Hylepnigalio Gistel, 1856 (type species Chrysomela caraboides Linnaeus, 1760, by monotypy) syn. nov. of Melandrya Fabricius, 1801 (Melandryidae), Polycystophorus Gistel, 1856 (type species Cantharis aeneus Linnaeus, 1758, designated herein) syn. nov. of Malachius Fabricius, 1775 (Melyridae), Sclerastes

  15. Family-Group Names In Coleoptera (Insecta

    Directory of Open Access Journals (Sweden)

    Patrice Bouchard

    2011-04-01

    Full Text Available We synthesize data on all known extant and fossil Coleoptera family-group names for the first time. A catalogue of 4887 family-group names (124 fossil, 4763 extant based on 4707 distinct genera in Coleoptera is given. A total of 4492 names are available, 183 of which are permanently invalid because they are based on a preoccupied or a suppressed type genus. Names are listed in a classification framework. We recognize as valid 24 superfamilies, 211 families, 541 subfamilies, 1663 tribes and 740 subtribes. For each name, the original spelling, author, year of publication, page number, correct stem and type genus are included. The original spelling and availability of each name were checked from primary literature. A list of necessary changes due to Priority and Homonymy problems, and actions taken, is given. Current usage of names was conserved, whenever possible, to promote stability of the classification. New synonymies (family-group names followed by genus-group names: Agronomina Gistel, 1848 syn. n. of Amarina Zimmermann, 1832 (Carabidae, Hylepnigalioini Gistel, 1856 syn. n. of Melandryini Leach, 1815 (Melandryidae, Polycystophoridae Gistel, 1856 syn. n. of Malachiinae Fleming, 1821 (Melyridae, Sclerasteinae Gistel, 1856 syn. n. of Ptilininae Shuckard, 1839 (Ptinidae, Phloeonomini Ádám, 2001 syn. n. of Omaliini MacLeay, 1825 (Staphylinidae, Sepedophilini Ádám, 2001 syn. n. of Tachyporini MacLeay, 1825 (Staphylinidae, Phibalini Gistel, 1856 syn. n. of Cteniopodini Solier, 1835 (Tenebrionidae; Agronoma Gistel 1848 (type species Carabus familiaris Duftschmid, 1812, designated herein syn. n. of Amara Bonelli, 1810 (Carabidae, Hylepnigalio Gistel, 1856 (type species Chrysomela caraboides Linnaeus, 1760, by monotypy syn. n. of Melandrya Fabricius, 1801 (Melandryidae, Polycystophorus Gistel, 1856 (type species Cantharis aeneus Linnaeus, 1758, designated herein syn. n. of Malachius Fabricius, 1775 (Melyridae, Sclerastes Gistel, 1856 (type species

  16. Taxonomic names, metadata, and the Semantic Web

    Directory of Open Access Journals (Sweden)

    Roderic D. M. Page

    2006-01-01

    Full Text Available Life Science Identifiers (LSIDs offer an attractive solution to the problem of globally unique identifiers for digital objects in biology. However, I suggest that in the context of taxonomic names, the most compelling benefit of adopting these identifiers comes from the metadata associated with each LSID. By using existing vocabularies wherever possible, and using a simple vocabulary for taxonomy-specific concepts we can quickly capture the essential information about a taxonomic name in the Resource Description Framework (RDF format. This opens up the prospect of using technologies developed for the Semantic Web to add ``taxonomic intelligence" to biodiversity databases. This essay explores some of these ideas in the context of providing a taxonomic framework for the phylogenetic database TreeBASE.

  17. Their Name is Half-Way

    Directory of Open Access Journals (Sweden)

    Elena Bagina

    2014-01-01

    Full Text Available The article is devoted to the phenomenon of the Soviet architecture of the late 1950s – 60s. The name of the article is “Their name is halfway”. It expresses the sense of all the processes occurring both in society and architecture during the Khrushchev Thaw. Developing the socalled Stalin’s Empire in the 1930-1950s, the masters of architecture had travelled only half the way. If the power had not abruptly stopped this movement, we would probably have a unique modern architecture dissimilar to the “international style”. The collapse of the Soviet Union stopped the evolution of architecture again: the unique features of the Soviet architecture of the 1960s ceased to develop. Architects were carried away with ironic games of postmodernism, which led them to deadlock.

  18. Cross domains Arabic named entity recognition system

    KAUST Repository

    Al-Ahmari, S. Saad

    2016-07-11

    Named Entity Recognition (NER) plays an important role in many Natural Language Processing (NLP) applications such as; Information Extraction (IE), Question Answering (QA), Text Clustering, Text Summarization and Word Sense Disambiguation. This paper presents the development and implementation of domain independent system to recognize three types of Arabic named entities. The system works based on a set of domain independent grammar-rules along with Arabic part of speech tagger in addition to gazetteers and lists of trigger words. The experimental results shown, that the system performed as good as other systems with better results in some cases of cross-domains corpora. © (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

  19. Cross domains Arabic named entity recognition system

    KAUST Repository

    Al-Ahmari, S. Saad; Abdullatif Al-Johar, B.

    2016-01-01

    Named Entity Recognition (NER) plays an important role in many Natural Language Processing (NLP) applications such as; Information Extraction (IE), Question Answering (QA), Text Clustering, Text Summarization and Word Sense Disambiguation. This paper presents the development and implementation of domain independent system to recognize three types of Arabic named entities. The system works based on a set of domain independent grammar-rules along with Arabic part of speech tagger in addition to gazetteers and lists of trigger words. The experimental results shown, that the system performed as good as other systems with better results in some cases of cross-domains corpora. © (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

  20. Naming the Mystery: An Augustinian Ideal

    Directory of Open Access Journals (Sweden)

    Allan Fitzgerald

    2015-03-01

    Full Text Available This article, by noticing Augustine’s constant questioning, shows that he often talks about not knowing and about his need for God’s help to know more. It is therefore better to see how he identifies the mystery than to focus on his answers, because he too recognizes his limits. His intellectual prowess can be seen more clearly when he “names the mystery” than by thinking that he has solved it.

  1. Exploring historical trends using taxonomic name metadata

    Directory of Open Access Journals (Sweden)

    Schenk Ryan

    2008-05-01

    Full Text Available Abstract Background Authority and year information have been attached to taxonomic names since Linnaean times. The systematic structure of taxonomic nomenclature facilitates the ability to develop tools that can be used to explore historical trends that may be associated with taxonomy. Results From the over 10.7 million taxonomic names that are part of the uBio system 4, approximately 3 million names were identified to have taxonomic authority information from the years 1750 to 2004. A pipe-delimited file was then generated, organized according to a Linnaean hierarchy and by years from 1750 to 2004, and imported into an Excel workbook. A series of macros were developed to create an Excel-based tool and a complementary Web site to explore the taxonomic data. A cursory and speculative analysis of the data reveals observable trends that may be attributable to significant events that are of both taxonomic (e.g., publishing of key monographs and societal importance (e.g., world wars. The findings also help quantify the number of taxonomic descriptions that may be made available through digitization initiatives. Conclusion Temporal organization of taxonomic data can be used to identify interesting biological epochs relative to historically significant events and ongoing efforts. We have developed an Excel workbook and complementary Web site that enables one to explore taxonomic trends for Linnaean taxonomic groupings, from Kingdoms to Families.

  2. Naming asteroids for the popularisation of astronomy

    Science.gov (United States)

    Naranjo, O. A.

    2008-06-01

    We give a detailed description of how the naming of asteroids was used as a prize in competitions run by educational institutions and museums. There were two events, one in Venezuela and one in Brazil, which used this as an attractive alternative method for the popularisation of astronomy. The first competition, named Bautizo Espacial (Space Baptism), consisted of scientific stories written by high school students. The second, called Grande Desafio (Big Challenge), was a competition where teams of students were challenged to design and build prototype equipment to fight forest fires. Nationally, both events received wide publicity through newspapers, radio, TV and web pages, reaching many people in both countries. As part of both the events, several activities promoting the public knowledge of astronomy were held. The asteroids that were named in these competitions are just some of the many discovered in a search programme developed by the Group of Theoretical Astrophysics of University of Los Andes in Mérida, Venezuela (Grupo de Astrofisica Teórica de la Universidad de Los Andes) as a mainstream research programme. Finally, Asteroids for the Popularisation of Astronomy has been formally proposed to the IAU as a worldwide programme during the celebration of the International Year of Astronomy in 2009 (IYA2009).

  3. Carbonaceous deposits on naptha reforming catalysts

    International Nuclear Information System (INIS)

    Redwan, D.S.

    1999-01-01

    Carbonaceous deposits on naphtha reforming catalysts play a decisive role in limiting process performance. The deposits negatively after catalyst activity, selectivity and the production cycle of a semi regenerative reformer. The magnitude of negative effect of those deposits is directly proportional to their amounts and complexity. Investigations on used reforming catalysts samples reveal that the amount and type (complexity of the chemical nature) of carbonaceous deposits are directly proportional to the catalysts life on stream and the severity of operating conditions. In addition, the combustibility behavior of carbonaceous deposits on the catalyst samples taken from different reformers are found to be different. Optimal carbon removal, for in situ catalyst regeneration, requires the specific conditions be developed, based on the results of well designed and properly performed investigations of the amount and type of carbonaceous deposits. (author)

  4. Hydrous titanium oxide-supported catalysts

    International Nuclear Information System (INIS)

    Dosch, R.G.; Stohl, F.V.; Richardson, J.T.

    1990-01-01

    Catalysts were prepared on hydrous titanium oxide (HTO) supports by ion exchange of an active metal for Na + ions incorporated in the HTO support during preparation by reaction with the parent Ti alkoxide. Strong active metal-HTO interactions as a result of the ion exchange reaction can require significantly different conditions for activation as compared to catalysts prepared by more widely used incipient wetness methods. The latter catalysts typically involve conversion or while the HTO catalysts require the alteration of electrostatic bonds between the metal and support with subsequent alteration of the support itself. In this paper, the authors discuss the activation, via sulfidation or reduction, of catalysts consisting of Co, Mo, or Ni-Mo dispersed on HTO supports by ion exchange. Correlations between the activation process and the hydrogenation, hydrodeoxygenation, and hydrodesulfurization activities of the catalysts are presented

  5. Optimization of catalyst system reaps economic benefits

    International Nuclear Information System (INIS)

    Le Roy, C.F.; Hanshaw, M.J.; Fischer, S.M.; Malik, T.; Kooiman, R.R.

    1991-01-01

    Champlin Refining and Chemicals Inc. is learning to optimize its catalyst systems for hydrotreating Venezuelan gas oils through a program of research, pilot plant testing, and commercial unit operation. The economic results of this project have been evaluated, and the benefits are most evident in improvements in product yields and qualities. The project has involved six commercial test runs, to date (Runs 10-15), with a seventh run planned. A summary of the different types of catalyst systems used in the test runs, and the catalyst philosophy that developed is given. Runs 10 and 11 used standard CoMo and NiMo catalysts for heavy gas oils hydrotreating. These catalysts had small pore sizes and suffered high deactivation rates because of metals contamination. When it was discovered that metals contamination was a problem, catalyst options were reviewed

  6. The Mystery of the River Name Mezen

    Directory of Open Access Journals (Sweden)

    Nadezhda V. Kabinina

    2017-11-01

    Full Text Available The article focuses on the origins of the name Mezen that refers to a large river in the north of the European part of Russia. The author critically reviews the earlier etymologies, in which the hydronym has been interpreted on the basis of the Ugric and Balto-Fennic-Sami data, and hypothesizes for Proto-Permic or Finno-Permic origins of the name as an alternative. According to this hypothesis, the name Mezen originates from an old lexical item related to the obsolete Komi-Zyrian mös and Udmurtian -mes (Permic *mεs with the general meaning of ‘source, spring, brook,’ which in toponymy stands for ‘river’ or ‘stream’. In evidence of the former toponymic productivity of this Permic word, the author provides multiple examples of hydronyms with the determinant -mVs to be found on the territory of the Republic of Komi and adjacent regions — the Russian North and the Perm Region (Vaimos, Kochmas, Madmas, Chermos, etc.. The author suggests that the lexical unit correlating with the Komi-Zyrian mös, Udmurtian -mes, and Common Permic *mεs was once part of a more complex term represented not only in the name Mezen, but also in its North Russian “counterparts,” Mezen’ga and Mezenda, as well as in substrate toponymy of the Komi Republic (Mozyn / Mozym = Russian Mezen; Mozimdіn, Mozimlyva, Mozimözin and in some substrate hydronyms of the modern Ob-Ugric areas (Khanty dialectal Mǒśaŋ = Russian Mozym, and Mоsəm = Nazym. Recognizing that ethnolinguistic attribution of the original lexical unit for these names seems problematic, the author is inclined to think that this is an old compound in which the final component, reconstructed as Common Permic *-εŋ, had the meaning of ‘river, stream’. Summing up all phonetic, morphological, semantic, and geographical evidence, the author concludes that the presently multilingual hydronyms of the MVsVn / MVsVm type most likely date back to the dialects of ancient “Permians,” still

  7. By which name should I call thee? The consequences of having multiple names.

    Science.gov (United States)

    Stevenage, Sarah V; Lewis, Hugh G

    2005-11-01

    The nominal competitor effect suggests that, when a person has two names associated with them, recall of either name is more difficult than if they just had one name. Drawing on a connectionist framework, this effect could arise either if multiple names were represented as being connected to a single person identity node (PIN), or if multiple names were represented as being connected via one-to-one links to multiple PINs. Whilst the latter has intuitive appeal, results from two experiments support the former architecture. Having two names connected to a single PIN not only gives rise to a nominal competitor effect (Experiment 1), but also gives rise to a familiarity enhancement effect (Experiment 2). These empirical results are simulated using an extension of Brédart, Valentine, Calder, and Gassi's (1995) connectionist architecture, which reveals that both effects hold even when the association of both names to the PIN is unequal. These results are presented in terms of a more complete model for person recognition, and the representation of semantic information within such a model is examined.

  8. Molecular catalysts structure and functional design

    CERN Document Server

    Gade, Lutz H

    2014-01-01

    Highlighting the key aspects and latest advances in the rapidly developing field of molecular catalysis, this book covers new strategies to investigate reaction mechanisms, the enhancement of the catalysts' selectivity and efficiency, as well as the rational design of well-defined molecular catalysts. The interdisciplinary author team with an excellent reputation within the community discusses experimental and theoretical studies, along with examples of improved catalysts, and their application in organic synthesis, biocatalysis, and supported organometallic catalysis. As a result, readers wil

  9. Oxidation catalysts on alkaline earth supports

    Science.gov (United States)

    Mohajeri, Nahid

    2017-03-21

    An oxidation catalyst includes a support including particles of an alkaline earth salt, and first particles including a palladium compound on the support. The oxidation catalyst can also include precious metal group (PMG) metal particles in addition to the first particles intermixed together on the support. A gas permeable polymer that provides a continuous phase can completely encapsulate the particles and the support. The oxidation catalyst may be used as a gas sensor, where the first particles are chemochromic particles.

  10. What's in a Name ?The Effect of an Artist's Name on Aesthetic Judgements

    OpenAIRE

    Cleeremans, Axel; Ginsburgh, Victor; Klein, Olivier; Noury, Abdul Ghafar

    2016-01-01

    Both economists and art historians suggest that the name of the artist is important and belongs with the work. We carried out an experiment to explore the influence that the presence and knowledge of an artist’s name exert on aesthetic judgments. Forty participants (20 students majoring in psychology and 20 in art history) were asked to rank twelve works painted by different artists, some of which bore the name of their actual creators, others not. The results demonstrated that the presence o...

  11. Recent progress in solution plasma-synthesized-carbon-supported catalysts for energy conversion systems

    Science.gov (United States)

    Lun Li, Oi; Lee, Hoonseung; Ishizaki, Takahiro

    2018-01-01

    Carbon-based materials have been widely utilized as the electrode materials in energy conversion and storage technologies, such as fuel cells and metal-air batteries. In these systems, the oxygen reduction reaction is an important step that determines the overall performance. A novel synthesis route, named the solution plasma process, has been recently utilized to synthesize various types of metal-based and heteroatom-doped carbon catalysts. In this review, we summarize cutting-edge technologies involving the synthesis and modeling of carbon-supported catalysts synthesized via solution plasma process, followed by current progress on the electrocatalytic performance of these catalysts. This review provides the fundamental and state-of-the-art performance of solution-plasma-synthesized electrode materials, as well as the remaining scientific and technological challenges for this process.

  12. Esterification of phenyl acetic acid with p-cresol using metal cation exchanged montmorillonite nanoclay catalysts.

    Science.gov (United States)

    Bhaskar, M; Surekha, M; Suma, N

    2018-02-01

    The liquid phase esterification of phenyl acetic acid with p -cresol over different metal cation exchanged montmorillonite nanoclays yields p -cresyl phenyl acetate. Different metal cation exchanged montmorillonite nanoclays (M n +  = Al 3+ , Zn 2+ , Mn 2+ , Fe 3+ , Cu 2+ ) were prepared and the catalytic activity was studied. The esterification reaction was conducted by varying molar ratio of the reactants, reaction time and catalyst amount on the yield of the ester. Among the different metal cation exchanged catalysts used, Al 3+ -montmorillonite nanoclay was found to be more active. The characterization of the material used was studied under different techniques, namely X-ray diffraction, scanning electron microscopy and thermogravimetric analysis. The product obtained, p -cresyl phenyl acetate, was identified by thin-layer chromotography and confirmed by Fourier transform infrared, 1 H NMR and 13 C NMR. The regeneration activity of used catalyst was also investigated up to fourth generation.

  13. Relation between catalyst-assisted transformation and multiple-copy transformation for bipartite pure states

    International Nuclear Information System (INIS)

    Feng Yuan; Duan Runyao; Ying Mingsheng

    2006-01-01

    We show that in some cases, catalyst-assisted entanglement transformation cannot be implemented by multiple-copy transformation for pure states. This fact, together with the result we obtained in R. Y. Duan, Y. Feng, X. Li, and M. S. Ying, Phys. Rev. A 71, 042319 (2005), namely that the latter can be completely implemented by the former, indicates that catalyst-assisted transformation is strictly more powerful than multiple-copy transformation. For the purely probabilistic setting we find, however, these two kinds of transformations are geometrically equivalent in the sense that the sets of pure states that can be converted into a given pure state with maximal probabilities not less than a given value have the same closure, regardless of whether catalyst-assisted transformation or multiple-copy transformation is used

  14. A comprehensive study of olefin metathesis catalyzed by Ru-based catalysts

    KAUST Repository

    Poater, Albert

    2015-09-29

    During a Ru-catalyzed reaction of an olefin with an alkylidene moiety that leads to a metallacycle intermediate, the cis insertion of the olefin can occur from two different directions, namely side and bottom with respect to the phosphine or N-heterocyclic ligand (NHC), depending on the first or second generation Grubbs catalyst. Here, DFT calculations unravel to which extent the bottom coordination of olefins with respect is favored over the side coordination through screening a wide range of catalysts, including first and second generation Grubbs catalysts as well as the subsequent Hoveyda derivatives. The equilibrium between bottom and side coordination is influenced by sterics, electronics, and polarity of the solvent. The side attack is favored for sterically less demanding NHC and/or alkylidene ligands. Moreover the generation of a 14-electron species is also discussed, with either pyridine or phosphine ligands to dissociate.

  15. A comprehensive study of olefin metathesis catalyzed by Ru-based catalysts

    KAUST Repository

    Poater, Albert; Cavallo, Luigi

    2015-01-01

    During a Ru-catalyzed reaction of an olefin with an alkylidene moiety that leads to a metallacycle intermediate, the cis insertion of the olefin can occur from two different directions, namely side and bottom with respect to the phosphine or N-heterocyclic ligand (NHC), depending on the first or second generation Grubbs catalyst. Here, DFT calculations unravel to which extent the bottom coordination of olefins with respect is favored over the side coordination through screening a wide range of catalysts, including first and second generation Grubbs catalysts as well as the subsequent Hoveyda derivatives. The equilibrium between bottom and side coordination is influenced by sterics, electronics, and polarity of the solvent. The side attack is favored for sterically less demanding NHC and/or alkylidene ligands. Moreover the generation of a 14-electron species is also discussed, with either pyridine or phosphine ligands to dissociate.

  16. Polyfunctional catalyst for processiing benzene fractions

    Energy Technology Data Exchange (ETDEWEB)

    G. Byakov; B.D. Zubitskii; B.G. Tryasunov; I.Ya. Petrov [Kuznetsk Basin State Technical University, Kemerovo (Russian Federation)

    2009-05-15

    A by-product of the coke industry is a raw benzene fraction benzene- 1 which may serve as for catalytic processes. The paper reports a study on the influence of the composition and temperatures on the activity and selectivity of NiO-V{sub 2}O{sub 6}-MoO{sub 3}/{gamma}-Al{sub 2}O{sub 3} catalysts and the corresponding binary and tertiary subsystems are studied by a pulse method in model reactions; the hydrodealkylating of toluene and the hydrodesulfurizing of thioprhene. The optimal catalyst composition is established. The new catalyst is compared with industrial catalysts.

  17. Nanoparticular metal oxide/anatase catalysts

    DEFF Research Database (Denmark)

    2010-01-01

    The present invention concerns a method of preparation of nanoparticular metal oxide catalysts having a narrow particle size distribution. In particular, the invention concerns preparation of nanoparticular metal oxide catalyst precursors comprising combustible crystallization seeds upon which...... the catalyst metai oxide is co-precipitated with the carrier metal oxide, which crystallization seeds are removed by combustion in a final calcining step. The present invention also concerns processes wherein the nanoparticular metal oxide catalysts of the invention are used, such as SCR (deNOx) reactions...

  18. Bifunctional cobalt F-T catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Miller, J.G.; Coughlin, P.K.; Yang, C.L.; Rabo, J.A.

    1986-03-01

    Results on the catalytic screening of Fischer-Tropsch catalysts containing shape selective components are reported. Catalysts consist of promoted cobalt intimately contacted with Union Carbide molecular sieves and were tested using a Berty type internally recycled reactor. Methods of preparation, promoters and shape selective components were varied and aimed at improving catalyst performance. Catalysts were developed demonstrating high C/sub 5/ + yields with high olefin content and low methane production while maintaining stability under both low and high H/sub 2/:CO ratio conditions.

  19. Nitrogen oxides storage catalysts containing cobalt

    Science.gov (United States)

    Lauterbach, Jochen; Snively, Christopher M.; Vijay, Rohit; Hendershot, Reed; Feist, Ben

    2010-10-12

    Nitrogen oxides (NO.sub.x) storage catalysts comprising cobalt and barium with a lean NO.sub.x storage ratio of 1.3 or greater. The NO.sub.x storage catalysts can be used to reduce NO.sub.x emissions from diesel or gas combustion engines by contacting the catalysts with the exhaust gas from the engines. The NO.sub.x storage catalysts can be one of the active components of a catalytic converter, which is used to treat exhaust gas from such engines.

  20. Planning levels in naming and reading complex numerals

    NARCIS (Netherlands)

    Meeuwissen, M.H.W.; Roelofs, A.P.A.; Levelt, W.J.M.

    2003-01-01

    On the basis of evidence from studies of the naming and reading of numerals, Ferrand (1999) argued that the naming of objects is slower than reading their names, due to a greater response uncertainty in naming than in reading, rather than to an obligatory conceptual preparation for naming, but not

  1. 27 CFR 40.93 - Change in corporate name.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Change in corporate name... Changes in Name § 40.93 Change in corporate name. Where there is a change in the name of a corporate... to establish that the corporate name has been changed. (72 Stat. 1421; 26 U.S.C. 5712) Changes in...

  2. 27 CFR 44.103 - Change in corporate name.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Change in corporate name... Warehouse Proprietors Changes in Name § 44.103 Change in corporate name. Where there is a change in the name... may be necessary to establish that the corporate name has been changed. (72 Stat. 1421; 26 U.S.C. 5712...

  3. Recognising and Interpreting Named Temporal Expressions

    DEFF Research Database (Denmark)

    Brucato, Matteo; Derczynski, Leon; Llorens, Hectjor

    2013-01-01

    This paper introduces a new class of temporal expression – named temporal expressions – and methods for recognising and interpreting its members. The commonest temporal expressions typically contain date and time words, like April or hours. Research into recognising and interpreting these typical...... expressions is mature in many languages. However, there is a class of expressions that are less typical, very varied, and difficult to automatically interpret. These indicate dates and times, but are harder to detect because they often do not contain time words and are not used frequently enough to appear...

  4. Star names their lore and meaning

    CERN Document Server

    Allen, Richard H

    1963-01-01

    Here is an unusual book for anyone who appreciates the beauty and wonder of the stars. Solidly based upon years of thorough research into astronomical writings and observations of the ancient Chinese, Arabic, Euphrates, Hellenic, and Roman civilizations, it is an informative, non-technical excursion into the vast heritage of folklore and history associated with the heavenly bodies. From his studies of the writings of scores of ancient astronomers, the author has come up with a fascinating history of the names various cultures have given the constellations, the literary and folkloristic uses

  5. Named data networking-based smart home

    OpenAIRE

    Syed Hassan Ahmed; Dongkyun Kim

    2016-01-01

    Named data networking (NDN) treats content/data as a “first class citizen” of the network by giving it a “name”. This content “name” is used to retrieve any information, unlike in device-centric networks (i.e., the current Internet), which depend on physical IP addresses. Meanwhile, the smart home concept has been gaining attention in academia and industries; various low-cost embedded devices are considered that can sense, process, store, and communicate data autonomously. In this paper, we s...

  6. Abbreviations of polymer names and guidelines for abbreviating polymer names (IUPAC Recommendations 2014)

    Czech Academy of Sciences Publication Activity Database

    He, J.; Chen, J.; Hellwich, K. H.; Hess, M.; Horie, K.; Jones, R. G.; Kahovec, Jaroslav; Kitayama, T.; Kratochvíl, Pavel; Meille, S. V.; Mita, I.; dos Santos, C.; Vert, M.; Vohlídal, J.

    2014-01-01

    Roč. 86, č. 6 (2014), s. 1003-1015 ISSN 0033-4545 Institutional support: RVO:61389013 Keywords : abbreviations * IUPAC Polymer Division * polymer names Subject RIV: CD - Macromolecular Chemistry Impact factor: 2.492, year: 2014

  7. What's in a Name? Sound Symbolism and Gender in First Names.

    Directory of Open Access Journals (Sweden)

    David M Sidhu

    Full Text Available Although the arbitrariness of language has been considered one of its defining features, studies have demonstrated that certain phonemes tend to be associated with certain kinds of meaning. A well-known example is the Bouba/Kiki effect, in which nonwords like bouba are associated with round shapes while nonwords like kiki are associated with sharp shapes. These sound symbolic associations have thus far been limited to nonwords. Here we tested whether or not the Bouba/Kiki effect extends to existing lexical stimuli; in particular, real first names. We found that the roundness/sharpness of the phonemes in first names impacted whether the names were associated with round or sharp shapes in the form of character silhouettes (Experiments 1a and 1b. We also observed an association between femaleness and round shapes, and maleness and sharp shapes. We next investigated whether this association would extend to the features of language and found the proportion of round-sounding phonemes was related to name gender (Analysis of Category Norms. Finally, we investigated whether sound symbolic associations for first names would be observed for other abstract properties; in particular, personality traits (Experiment 2. We found that adjectives previously judged to be either descriptive of a figuratively 'round' or a 'sharp' personality were associated with names containing either round- or sharp-sounding phonemes, respectively. These results demonstrate that sound symbolic associations extend to existing lexical stimuli, providing a new example of non-arbitrary mappings between form and meaning.

  8. Ultra advanced projects. ; Naming hyper-hightech projects. (Cho) no tsuku project. ; Naming no shikumi

    Energy Technology Data Exchange (ETDEWEB)

    Goto, Y. (Ministry of International Trade and Industry, Tokyo (Japan))

    1992-10-05

    Significance of using 'super' for naming a project of technological development is discussed. Functions of naming are classified into (1) recognition, (2) display and (3) sales-promotion, whereby mechanism of naming of merchandise that is developed through the technique of 3 is considered. Further, the mechanism of naming is discussed in relation to marketing. It is pointed out that naming of merchandise is determined on the basis of (1) concept of planned goods and (2) marketing-mixes composed of goods, price, sales-roots and sales-promotion. The same mechanism works also in a project for technological development. Technical trends are caught and projects are targetted by taking supposed regimes into account, thereby the most suitable mix is formed. The mix in the technological development is assumed to be composed of purpose, specification, regime and sales-promotion. Two examples of the governmental projects by Ministry of International Trade and Industry, 'the big regime for research and development on industrial technologies' and 'the regime for development of the fundamental technologies in the next generation' are introduced and the significance of their naming is described. 2 tabs.

  9. New Trends in Gold Catalysts

    Directory of Open Access Journals (Sweden)

    Leonarda F. Liotta

    2014-07-01

    Full Text Available Gold is an element that has fascinated mankind for millennia. The catalytic properties of gold have been a source of debate, due to its complete chemical inertness when in a bulk form, while it can oxidize CO at temperatures as low as ~200 K when in a nanocrystalline state, as discovered by Haruta in the late 1980s [1]. Since then, extensive activity in both applied and fundamental research on gold has been initiated. The importance of the catalysis by gold represents one of the fasted growing fields in science and is proven by the promising applications in several fields, such as green chemistry and environmental catalysis, in the synthesis of single-walled carbon nanotubes, as modifiers of Ni catalysts for methane steam and dry reforming reactions and in biological and electrochemistry applications. The range of reactions catalyzed by gold, as well as the suitability of different supports and the influence of the preparation conditions have been widely explored and optimized in applied research [2]. Gold catalysts appeared to be very different from the other noble metal-based catalysts, due to their marked dependence on the preparation method, which is crucial for the genesis of the catalytic activity. Several methods, including deposition-precipitation, chemical vapor deposition and cation adsorption, have been applied for the preparation of gold catalysts over reducible oxides, like TiO2. Among these methods, deposition-precipitation has been the most frequently employed method for Au loading, and it involves the use of tetrachloroauric (III acid as a precursor. On the other hand, the number of articles dealing with Au-loaded acidic supports is smaller than that on basic supports, possibly because the deposition of [AuCl4]− or [AuOHxCl4−x]− species on acidic supports is difficult, due to their very low point of zero charge. Despite this challenge, several groups have reported the use of acidic zeolites as supports for gold. Zeolites

  10. Active carbon catalyst for heavy oil upgrading

    Energy Technology Data Exchange (ETDEWEB)

    Fukuyama, Hidetsugu; Terai, Satoshi [Technology Research Center, Toyo Engineering Corporation, 1818 Azafujimi, Togo, Mobara-shi, Chiba 297-00017 (Japan); Uchida, Masayuki [Business Planning and Exploring Department, Overseas Business Development and Marketing Division, Toyo Engineering Corporation, 2-8-1 Akanehama, Narashino-shi, Chiba 275-0024 (Japan); Cano, Jose L.; Ancheyta, Jorge [Maya Crude Treatment Project, Instituto Mexicano del Petroleo, Eje Central Lazaro Cardenas No. 152, Col. San Bartolo Atepehuacan, Mexico D.F. 07730 (Mexico)

    2004-11-24

    The active carbon (AC) catalyst was studied by hydrocracking of Middle Eastern vacuum residue (VR) for heavy oil upgrading. It was observed that the active carbon has the affinity to heavy hydrocarbon compounds and adsorption selectivity to asphaltenes, and exhibits better ability to restrict the coke formation during the hydrocracking reaction of VR. The mesopore of active carbon was thought to play an important role for effective conversion of heavy hydrocarbon compounds into lighter fractions restricting carbon formation. The performance of the AC catalyst was examined by continuous hydrocracking by CSTR for the removal of such impurities as sulfur and heavy metals (nickel and vanadium), which are mostly concentrated in the asphaltenes. The AC catalyst was confirmed to be very effective for the removal of heavy metals from Middle Eastern VR, Maya/Istmo VR and Maya VR. The extruded AC catalysts were produced by industrial manufacturing method. The application test of the extruded AC catalyst for ebullating-bed reactor as one of the commercially applicable reactors was carried out at the ebullating-bed pilot plant for 500h. The ebullition of the extruded AC catalyst was successfully traced and confirmed by existing {gamma}-ray density meter. The extruded AC catalyst showed stable performance with less sediment formation at an equivalent conversion by conventional alumina catalyst at commercial ebullating-bed unit. The degradation of the AC catalyst at the aging test was observed to be less than that of the conventional alumina catalyst. Thus, the AC catalyst was confirmed to be effective and suitable for upgrading of heavy oil, especially such heavy oils as Maya, which contains much heavy metals.

  11. Microscopic activity patterns in the naming game

    International Nuclear Information System (INIS)

    Dall'Asta, Luca; Baronchelli, Andrea

    2006-01-01

    The models of statistical physics used to study collective phenomena in some interdisciplinary contexts, such as social dynamics and opinion spreading, do not consider the effects of the memory on individual decision processes. In contrast, in the naming game, a recently proposed model of language formation, each agent chooses a particular state, or opinion, by means of a memory-based negotiation process, during which a variable number of states is collected and kept in memory. In this perspective, the statistical features of the number of states collected by the agents become a relevant quantity to understand the dynamics of the model, and the influence of topological properties on memory-based models. By means of a master equation approach, we analyse the internal agent dynamics of the naming game in populations embedded on networks, finding that it strongly depends on very general topological properties of the system (e.g. average and fluctuations of the degree). However, the influence of topological properties on the microscopic individual dynamics is a general phenomenon that should characterize all those social interactions that can be modelled by memory-based negotiation processes

  12. Armenian Demons Called Kaj: Image and Name

    Directory of Open Access Journals (Sweden)

    Armen Y. Petrosyan

    2018-03-01

    Full Text Available The article provides a study of Armenian demons, the kajs, and their superior deity — the dragonslayer Vahagn, in the historical-etymological and ethno-cultural perspective. Specific features of kajs and their leader as imagined by ancient people are identifi ed: they resemble vishap-dragons and devs, live in the mountains and have temples there, make war, hunt, steal wheat and wine from people, love music, arrange weddings, drive people crazy, braid horsehair, and so on. Clear linkages are drawn between Armenian kajs and their leader with the mythological characters of Indo-European (Iranian, Indian traditions. In Armenian, the fi rst meaning of k‘aǰ is ‘good, select; of fi ne / better quality’. This is exactly how some Armenian spirits, including kajs, are often referred to — as “good” — mezane laver, mezne ałekner ‘better than us,’ ałek manuk ‘good youngster / warrior’. This is also true to some other traditions: the Persian az mā behtarān, German Gude (cf. also the names of Indian vasu and sādhya. The article develops the etymology of the name k‘aǰ (a corrected version of that proposed by H. Pedersen in 1906: *swo-sHdhyo- — ‘self / own + right / righteous,’ i.e. ‘good’. This image passed into the Georgian and Ossetian traditions (Georgian kajs, Ossetian kadzi.

  13. Undersea Feature Place Names as of June 2014

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — There are approximately 5100 undersea features with names approved by the United States Board on Geographic Names (BGN) currently in the Geographic Names Data Base...

  14. Highly Stable and Active Catalyst for Sabatier Reactions

    Science.gov (United States)

    Hu, Jianli; Brooks, Kriston P.

    2012-01-01

    Highly active Ru/TiO2 catalysts for Sabatier reaction have been developed. The catalysts have shown to be stable under repeated shutting down/startup conditions. When the Ru/TiO2 catalyst is coated on the engineered substrate Fe-CrAlY felt, activity enhancement is more than doubled when compared with an identically prepared engineered catalyst made from commercial Degussa catalyst. Also, bimetallic Ru-Rh/TiO2 catalysts show high activity at high throughput.

  15. Phonaesthemes and sound symbolism in Swedish brand names

    OpenAIRE

    Abelin, Åsa

    2015-01-01

    This study examines the prevalence of sound symbolism in Swedish brand names. A general principle of brand name design is that effective names should be distinctive, recognizable, easy to pronounce and meaningful. Much money is invested in designing powerful brand names, where the emotional impact of the names on consumers is also relevant and it is important to avoid negative connotations. Customers prefer brand names, which say something about the product, as this reduces product uncertaint...

  16. LaFePdO3 perovskite automotive catalyst having a self-regenerative function

    International Nuclear Information System (INIS)

    Tanaka, Hirohisa; Tan, Isao; Uenishi, Mari; Taniguchi, Masashi; Kimura, Mareo; Nishihata, Yasuo; Mizuki, Jun'ichiro

    2006-01-01

    An automotive gasoline engine is operated close to the stoichiometric air-to-fuel ratio to convert the pollutant emissions simultaneously, accompanying with redox (reduction and oxidation) fluctuations in exhaust-gas composition through adjusting the air-to-fuel ratio. An innovative LaFe 0.95 Pd 0.05 O 3 perovskite catalyst, named 'the intelligent catalyst', has been developed, and which has a new self-regenerative function of the precious metal in the inherent fluctuations of automotive exhaust-gas. The LaFe 0.95 Pd 0.05 O 3 perovskite catalyst, La located at the A-site, was prepared by the alkoxide method. Pd located at the B-site of the perovskite lattice in the oxidative atmosphere, and segregated out to form small metallic particles in the reductive atmosphere. The catalyst retained a predominantly perovskite structure throughout a redox cycle of the exhaust-gas, while the local structure around Pd could be changed in a completely reversible manner. The agglomeration and growth of Pd particles is suppressed, even under the severe environment, as a result of the movement between inside and outside the perovskite lattice. It is revealed that the self-regenerative function of Pd occurs even at 200 deg. C, unexpectedly low temperature, in the LaFe 0.95 Pd 0.05 O 3 catalyst. Since the high catalytic activity is maintained, the great reduction of Pd loading has been achieved. The intelligent catalyst is expected as a new application of the rare earth, and then the technology is expected in the same way in the global standard of the catalyst designing

  17. Spillover effect induced Pt-TiO2/C as ethanol tolerant oxygen reduction reaction catalyst for direct ethanol fuel cells

    International Nuclear Information System (INIS)

    Meenakshi, S.; Nishanth, K.G.; Sridhar, P.; Pitchumani, S.

    2014-01-01

    Hypo-hyper-d-electronic interactive nature is used to develop a new carbon supported HT-Pt-TiO 2 composite catalyst comprising Pt and Ti in varying atomic ratio, namely 1:1, 2:1 and 3:1. The electro-catalysts are characterized by XRD, TEM, SEM-EDAX, Cyclic Voltammetry (CV) and Linear sweep voltammetry (LSV) techniques. HT-Pt-TiO 2 /C catalysts exhibit significant improvement in oxygen reduction reaction (ORR) over Pt/C. The effect of composition towards ORR with and without ethanol has been studied. The direct ethanol fuel cell (DEFC) with HT-Pt-TiO 2 /C cathode catalyst exhibits an enhanced peak power density of 41 mW cm −2 , whereas 21 mW cm −2 is obtained for the DEFCs with carbon-supported Pt catalyst operating under identical conditions

  18. Preparation of catalyst coated membrane by modified decal transfer method for proton exchange membrane fuel cell

    Science.gov (United States)

    Indriyati; Irmawati, Y.; Prihandoko, B.

    2017-07-01

    A new catalyst coated membrane (CCM) was prepared by modified decal transfer method. A structure of ionomer/catalyst/carbon/substrate was used to facilitate the transfer of catalyst layer from decal substrate to the membrane at quite low hot-pressing temperature (120 °C) for 8 min. Several decal substrates were tested to select a proper substrate, namely PTFE cloth, PTFE film, aluminium foil, and OHP transparent sheet. The transfer degree of catalyst layer was estimated. Elemental analysis and SEM-mapping were performed to evaluate the residue, whereas contact angle measurement was conducted to characterize the hydrophobicity of decal substrates. The results showed that PTFE cloth and PFTE film transferred approximately 90% of catalyst layer onto the membrane, while the other two substrates were around 70%. Furthermore, the elemental analysis of the residue on the substrate revealed that it was mainly composed of carbon and fluorine for PTFE cloth and PTFE film. This result supports other findings that PTFE cloth and PTFE film are suitable as decal substrate at low temperature hot pressing for fabricating CCM.

  19. Nature of nitrogen specie in coke and their role in NOx formation during FCC catalyst regeneration

    International Nuclear Information System (INIS)

    Babich, I.V.; Seshan, K.; Lefferts, L.

    2005-01-01

    NO x emission during the regeneration of coked fluid catalytic cracking (FCC) catalysts is an environmental problem. In order to follow the route to NO x formation and try to find ways to suppress it, a coked industrial FCC catalyst has been prepared using model N-containing compounds, e.g., pyridine, pyrrole, aniline and hexadecane-pyridine mixture. Nitrogen present in the FCC feed is incorporated as polyaromatic compounds in the coke deposited on the catalyst during cracking. Its functionality has been characterized using XPS. Nitrogen specie of different types, namely, pyridine, pyrrolic or quaternary-nitrogen (Q-N) have been discriminated. Decomposition of the coke during the catalyst regeneration (temperature programmed oxidation (TPO) and isothermal oxidation) has been monitored by GC and MS measurements of the gaseous products formed. The pyrrolic- and pyridinic-type N specie, present more in the outer coke layers, are oxidized under conditions when still large amount of C or CO is available from coke to reduced NO x formed to N 2 . ''Q-N'' type species are present in the inner layer, strongly adsorbed on the acid sites on the catalyst. They are combusted last during regeneration. As most of the coke is already combusted at this point, lack of reductants (C, CO, etc.) results in the presence of NO x in the tail gas

  20. Nanosheet Supported Single-Metal Atom Bifunctional Catalyst for Overall Water Splitting.

    Science.gov (United States)

    Ling, Chongyi; Shi, Li; Ouyang, Yixin; Zeng, Xiao Cheng; Wang, Jinlan

    2017-08-09

    Nanosheet supported single-atom catalysts (SACs) can make full use of metal atoms and yet entail high selectivity and activity, and bifunctional catalysts can enable higher performance while lowering the cost than two separate unifunctional catalysts. Supported single-atom bifunctional catalysts are therefore of great economic interest and scientific importance. Here, on the basis of first-principles computations, we report a design of the first single-atom bifunctional eletrocatalyst, namely, isolated nickel atom supported on β 12 boron monolayer (Ni 1 /β 12 -BM), to achieve overall water splitting. This nanosheet supported SAC exhibits remarkable electrocatalytic performance with the computed overpotential for oxygen/hydrogen evolution reaction being just 0.40/0.06 V. The ab initio molecular dynamics simulation shows that the SAC can survive up to 800 K elevated temperature, while enacting a high energy barrier of 1.68 eV to prevent isolated Ni atoms from clustering. A viable experimental route for the synthesis of Ni 1 /β 12 -BM SAC is demonstrated from computer simulation. The desired nanosheet supported single-atom bifunctional catalysts not only show great potential for achieving overall water splitting but also offer cost-effective opportunities for advancing clean energy technology.

  1. Strategies for catalyst development: possibilities of the ``rational approach`` illustrated with partial oxidation reactions

    Energy Technology Data Exchange (ETDEWEB)

    Weiss, W.; Schedel-Niedrig, T.; Schloegl, R. [Fritz-Haber-Institut der Max-Planck-Gesellschaft, Berlin (Germany). Abt. Oberflaechenphysik

    1998-12-31

    The paper discusses two petrochemical selective oxidation reactions namely the practised formation of styrene (STY) and the desired oxidative functionalisation of propane. The present knowledge about the mode of operation of oxide catalysts is critically considered. The dehydrogenation of ethylbenzene (EB) should be described by an oxidehydration with water acting as oxidant. The potential role of the coke formed during catalytic reaction as co-catalyst will be discussed. Selective oxidation is connected with the participation of lattice oxygen mechanism which transforms unselective gas phase oxygen into selective oxygen. The atomistic description of this process is still quite unclear as well as the electron structural properties of the activated oxygen atom. The Role of solid state acidity as compared to the role of lattice oxygen is much less well investigated modern multiphase-multielement oxide (MMO) catalysts. The rationale is that the significant efforts made to improve current MMO systems by chemical modifications can be very much more fruitful when in a first step the mode of action of a catalyst is clarified on the basis of suitable experiments. Such time-consuming experiments at the beginning of a campaign for catalyst improvement pay back their investment in later stages of the project when strategies of chemical development can be derived on grounds of understanding. (orig.)

  2. Synthesis and application of new polymer bound catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Fetterly, Brandon Michael [Iowa State Univ., Ames, IA (United States)

    2005-01-01

    Nitric acid has been shown to be a weak acid in acetonitrile. It is conceivable that a nitrate salt of a weakly Lewis acidic cation could furnish a ''naked'' nitrate anion as a basic catalyst in a variety of reactions in non-aqueous solvents. Such a nitrate salt could also be bound to a polymeric support via the cation, thereby allowing for reclamation and recycling of the nitrate ion. This subject is dealt with in Chapter 2, wherein my contributions consisted of performing all the reactions with the polymer supported catalyst and carrying out the experiments necessary to shed light on the reaction mechanisms. Chapter 3 contains a description of the structure and catalytic properties of an azidoproazaphosphatrane. This compound is an air-stable versatile catalyst that has proven useful not only homogeneously, but also when bound to a solid support. The synthesis of a polymer bound proazaphosphatrane containing a trivalent phosphorus is presented in Chapter 4. Such a compound has been sought after by our group for a number of years. Not only does the synthesis I have accomplished for it allow for easier separation of proazaphosphatrane catalysts from reaction mixtures, but recycling of the base is made much simpler. Proazaphosphatranes are useful homogeneous catalysts that activate atoms in other reagents, thus enhancing their reactivity. The next chapters deal with two such reactions with aldehydes and ketones, namely silylcyanations with trialkylsilylcyanides (Chapters 5 and 6) and reductions with poly(methylhydrosiloxane), in Chapter 7. In Chapter 5, Zhigang Wang performed the initial optimization and scoping of the reaction, while repetitions of the scoping experiments for reproducibility, determination of diastereomeric ratios, and experiments aimed at elucidating aspects of the mechanism were performed by me. The proazaphosphatrane coordinates to the silicon atom in both cases, thereby allowing the aforementioned reactions to proceed under

  3. MARKED PERSONAL NAMES: AN ANTROPONIMIC STUDY OF BALINESE STUDENTS’ NAMES IN DENPASAR

    Directory of Open Access Journals (Sweden)

    Ni Made Iwan Indrawan

    2015-07-01

    Full Text Available The research aims to account for the Marked Balinese Students’ Personal Names. Four research problems are studied, namely (1 the criteria used to distinguish the marked names (NDMBmk and the unmarked ones (NDMTBmk, (2 the functions of the markedness, (3 the factors that influence it, and (4 the ideologies that operate behind it. The markedness of personal names reflect a relation between the arbitrariness in language uses and the extralinguistic factors influencing it. In the context of Balinese, the tradition, legal practices, and the globalisation may affect the arbitrariness. In order to determine NDMBmk, criteria of markedness was constructed. According to the criteria, structurally, NDMBmk consist of at least five elements, as Anak Agung Arim Kasunu Arya Penarungan. Behaviorally, they may consist of names not derived from Balinese and/or Sanskrit, such as Giovani on I Gede Adeyaka Giovani, adopt a foreign spelling system as Chrisna on Ni Putu Chrisna Wulandari, or use no markers of Balinese ethnics or caste as Yunisari Wira Putri. Out of 698 sampled names, NDMBmk are found 54. Besides denoting, the marked elements also function to distinguish personal identities, to shape the existence of the name holder, to connote particular perception, and to reflect the changing era. The factors influencing the markedness are the need to express something new, a wish to acculturate, to raise status or keep a distance socially, and to demonstrate a linguistic expertise, or when seeing from the concept of imagery, the factors are the imagery on something new and on social status or distancing. The ideologies behind the phenomenon are globalist, nationalist, and the casteless-Balinese.

  4. MARKED PERSONAL NAMES: AN ANTROPONIMIC STUDY OF BALINESE STUDENTS’ NAMES IN DENPASAR

    Directory of Open Access Journals (Sweden)

    Ni Made Iwan Indrawan

    2012-07-01

    Full Text Available The research aims to account for the Marked Balinese Students’ Personal Names. Four research problems are studied, namely (1 the criteria used to distinguish the marked names (NDMBmk and the unmarked ones (NDMTBmk, (2 the functions of the markedness, (3 the factors that influence it, and (4 the ideologies that operate behind it. The markedness of personal names reflect a relation between the arbitrariness in language uses and the extralinguistic factors influencing it. In the context of Balinese, the tradition, legal practices, and the globalisation may affect the arbitrariness. In order to determine NDMBmk, criteria of markedness was constructed. According to the criteria, structurally, NDMBmk consist of at least five elements, as Anak Agung Arim Kasunu Arya Penarungan. Behaviorally, they may consist of names not derived from Balinese and/or Sanskrit, such as Giovani on I Gede Adeyaka Giovani, adopt a foreign spelling system as Chrisna on Ni Putu Chrisna Wulandari, or use no markers of Balinese ethnics or caste as Yunisari Wira Putri. Out of 698 sampled names, NDMBmk are found 54. Besides denoting, the marked elements also function to distinguish personal identities, to shape the existence of the name holder, to connote particular perception, and to reflect the changing era. The factors influencing the markedness are the need to express something new, a wish to acculturate, to raise status or keep a distance socially, and to demonstrate a linguistic expertise, or when seeing from the concept of imagery, the factors are the imagery on something new and on social status or distancing. The ideologies behind the phenomenon are globalist, nationalist, and the casteless-Balinese.

  5. Novel metalloporphyrin catalysts for the oxidation of hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Showalter, M.C.; Nenoff, T.M.; Shelnutt, J.A.

    1996-11-01

    Work was done for developing biomimetic oxidation catalysts. Two classes of metalloporphyrin catalysts were studied. The first class of catalysts studied were a novel series of highly substituted metalloporphyrins, the fluorinated iron dodecaphenylporphyrins. These homogeneous metalloporphyrin catalysts were screened for activity as catalysts in the oxidation of hydrocarbons by dioxygen. Results are discussed with respect to catalyst structural features. The second type of catalysts studied were heterogeneous catalysts consisting of metalloporphyrins applied to inorganic supports. Preliminary catalytic testing results with these materials are presented.

  6. European workshop on spent catalysts. Book of abstracts

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    In 1999 and 2002 two well attended workshops on recycling, regeneration, reuse and disposal of spent catalysts took place in Frankfurt. This series has been continued in Berlin. The workshop was organized in collaboration with DGMK, the German Society for Petroleum and Coal Science and Technology. Contributions were in the following areas of catalyst deactivation: recycling of spent catalysts in chemical and petrochemical industry, recycling of precious metal catalysts and heterogenous base metal catalysts, legal aspects of transboundary movements, catalyst regeneration, quality control, slurry catalysts, commercial reactivation of hydrotreating catalysts. (uke)

  7. EPONYMY BASED ON NAMES OF COMPANIES

    Directory of Open Access Journals (Sweden)

    Éva Kovács

    2016-03-01

    Full Text Available As is generally defined, eponymy, one of the word-formation processes refers to the derivation of a name of a city, country, era, institution, or other place or thing from that of a person such as sandwich, wellington, mackintosh or cardigan. Eponymy can be classified in several ways, some refer to foods (Pizza Margaritha, diseases (Alzheimer disease, places (Washington, scientific laws (Archimedes’s principle and sport terms (Axel jump, whereas others indicate trademarks, brand names (aspirin, prizes, awards (Nobel Prize, inventions (Rubic’s Cube, ideologies (Darwinism, colleges, universities (Stanford University and companies (Ford. The present paper discusses eponyms which denote companies based on the name of their founder(s (e.g. Porsche, Siemens, Gucci, Campari, Cadbury, McDonald’s and Walt Disney, etc. by revealing what kind of a metonymic relationship is manifested in them. Cognitive linguists, such as Lakoff and Johnson (1980, Radden and Kövecses (1999 and Kövecses (2002 state that metonymy is essentially a conceptual phenomenon, in which one conceptual entity, the vehicle, provides mental access to another conceptual entity, the target, within the same idealized cognitive model. In fact, metonymy is part of our everyday way of thinking, and is grounded in experience. Common metonymies include PRODUCER FOR PRODUCT (Pass me the Shakespeare on the top shelf., PLACE FOR EVENT (Iraq nearly cost Tony Blair the premiership, PLACE FOR INSTITUTION (Downing Street refused comment., PART FOR THE WHOLE (She’s not just a pretty face., WHOLE FOR THE PART (England beat Australia in the 2003 Rugby World Cup final. and EFFECT FOR CAUSE (He has a long face.. Following the cognitive approach to metonyms, I tentatively suggest that the metonymy PRODUCER FOR THE PRODUCT can be observed in the case of car makes, products of famous fashion houses, cosmetics and drinks as is illustrated by examples like He’s bought a Ferrari. I ate a McDonald or

  8. Transmission electron microscopy on live catalysts

    NARCIS (Netherlands)

    Bremmer, G.M.

    2017-01-01

    The dissertation describes TEM experiments on heterogeneous catalysts. Starting with characterization of (Ni/Co)MoS2 on Alumina and the effect of oxidation, and sequential resulfidation. After that, Co-based catalysts are used for high-resolution (S)TEM/EDX caracterization studies, and in situ

  9. Chemical engineering design of CO oxidation catalysts

    Science.gov (United States)

    Herz, Richard K.

    1987-01-01

    How a chemical reaction engineer would approach the challenge of designing a CO oxidation catalyst for pulsed CO2 lasers is described. CO oxidation catalysts have a long history of application, of course, so it is instructive to first consider the special requirements of the laser application and then to compare them to the characteristics of existing processes which utilize CO oxidation catalysts. All CO2 laser applications require a CO oxidation catalyst with the following characteristics: (1) active at stoichiometric ratios of O2 and CO, (2) no inhibition by CO2 or other components of the laser environment, (3) releases no particulates during vibration or thermal cycling, and (4) long lifetime with a stable activity. In all applications, low consumption of power is desirable, a characteristic especially critical in aerospace applications and, thus, catalyst activity at low temperatures is highly desirable. High power lasers with high pulse repetition rates inherently require circulation of the gas mixture and this forced circulation is available for moving gas past the catalyst. Low repetition rate lasers, however, do not inherently require gas circulation, so a catalyst that did not require such circulation would be favorable from the standpoint of minimum power consumption. Lasers designed for atmospheric penetration of their infrared radiation utilize CO2 formed from rare isotopes of oxygen and this application has the additional constraint that normal abundance oxygen isotopes in the catalyst must not exchange with rare isotopes in the gas mixture.

  10. Carbons and carbon supported catalysts in hydroprocessing

    Energy Technology Data Exchange (ETDEWEB)

    Furimsky, Edward

    2009-07-01

    This book is a comprehensive summary of recent research in the field and covers all areas of carbons and carbon materials. The potential application of carbon supports, particularly those of carbon black (CB) and activated carbon (AC) in hydroprocessing catalysis are covered. Novel carbon materials such as carbon fibers and carbon nano tubes (CNT) are also covered, including the more recent developments in the use of fullerenes in hydroprocessing applications. Although the primary focus of this book is on carbons and carbon supported catalysts, it also identifies the difference in the effect of carbon supports compared with the oxidic supports, particularly that of the Al{sub 2}O{sub 3}. The difference in catalyst activity and stability was estimated using both model compounds and real feeds under variable conditions. The conditions applied during the preparation of carbon supported catalysts are also comprehensively covered and include various methods of pretreatment of carbon supports to enhance catalyst performance. The model compounds results consistently show higher hydrodesulfurization and hydrodeoxygenation activities of carbon supported catalysts than that of the Al{sub 2}O{sub 3} supported catalysts. Also, the deactivation of the former catalysts by coke deposition was much less evident. Chapter 6.3.1.3 is on carbon-supported catalysts: coal-derived liquids.

  11. Ligand iron catalysts for selective hydrogenation

    Science.gov (United States)

    Casey, Charles P.; Guan, Hairong

    2010-11-16

    Disclosed are iron ligand catalysts for selective hydrogenation of aldehydes, ketones and imines. A catalyst such as dicarbonyl iron hydride hydroxycyclopentadiene) complex uses the OH on the five member ring and hydrogen linked to the iron to facilitate hydrogenation reactions, particularly in the presence of hydrogen gas.

  12. The strange case of the "oscillating" catalysts

    NARCIS (Netherlands)

    Busico, [No Value; Cipullo, R; Kretschmer, W; Talarico, G; Vacatello, M; Castelli, VV

    The field of stereoselective propene polymerization has been dramatically innovated by the discovery of homogeneous metallocene-based catalysts with well-defined and tunable molecular structure. Of all, "oscillating" metallocenes are probably the most ingenious and challenging example of catalyst

  13. New catalysts for clean environment

    Energy Technology Data Exchange (ETDEWEB)

    Maijanen, A; Hase, A [eds.; VTT Chemical Technology, Espoo (Finland)

    1997-12-31

    VTT launched a Research Programme on Chemical Reaction Mechanisms (CREAM) in 1993. The three-year programme (1993-1995) has focused on reaction mechanisms relevant to process industries and aimed at developing novel catalysts and biocatalysts for forest, food, and specialty chemicals industries as well as for energy production. The preliminary results of this programme have already been presented in the first symposium organized in Espoo in September 1994. To conclude the programme the second symposium is organized in Otaniemi, Espoo on January 29 - 30, 1996. Papers by 19 speakers and 17 poster presentations of the 1996 Symposium are included in this book. The Symposium consists of four sessions: Biotechnology for Natural Fibers Processing, New Biocatalysts, Catalysts for Clean Energy, and New Opportunities for Chemical Industry. The CREAM programme has tried to foresee solutions for the problems challenged by the public concern on environmental aspects, especially dealing with industrial processes and novel use of raw materials and energy. The programme has followed the basic routes that can lead to natural and simple solutions to develop processes in the fields of forest, food fine chemicals, and energy industry. This symposium presents the results of the programme to learn and further discuss together with the international experts that have been invited as keynote speakers. (author)

  14. New catalysts for clean environment

    Energy Technology Data Exchange (ETDEWEB)

    Maijanen, A.; Hase, A. [eds.] [VTT Chemical Technology, Espoo (Finland)

    1996-12-31

    VTT launched a Research Programme on Chemical Reaction Mechanisms (CREAM) in 1993. The three-year programme (1993-1995) has focused on reaction mechanisms relevant to process industries and aimed at developing novel catalysts and biocatalysts for forest, food, and specialty chemicals industries as well as for energy production. The preliminary results of this programme have already been presented in the first symposium organized in Espoo in September 1994. To conclude the programme the second symposium is organized in Otaniemi, Espoo on January 29 - 30, 1996. Papers by 19 speakers and 17 poster presentations of the 1996 Symposium are included in this book. The Symposium consists of four sessions: Biotechnology for Natural Fibers Processing, New Biocatalysts, Catalysts for Clean Energy, and New Opportunities for Chemical Industry. The CREAM programme has tried to foresee solutions for the problems challenged by the public concern on environmental aspects, especially dealing with industrial processes and novel use of raw materials and energy. The programme has followed the basic routes that can lead to natural and simple solutions to develop processes in the fields of forest, food fine chemicals, and energy industry. This symposium presents the results of the programme to learn and further discuss together with the international experts that have been invited as keynote speakers. (author)

  15. Isobutane alkylation over solid catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Kozorezov, Y.I.; Lisin, V.I.

    1979-05-01

    Commercial alumina modified with 6Vertical Bar3< by wt boron trifluoride was active in isobutane alkylation with ethylene in a flow reactor at 5:1 isobutane-ethylene and 5-20 min reaction time. The reaction rate was first-order in ethylene and increased with increasing temperature (20/sup 0/-80/sup 0/C) and ethylene pressure (0.2-3 atm). The calculated activation energy was 8.4 kj. Kinetic data and the activity of tert.-butyl chloride, but not ethyl chloride as alkylating agents in place of ethylene suggested a carbonium-ion chain mechanism involving both surface and gas-phase reactions. The ethylene-based yield of the alkylate decreased from 132 to 41Vertical Bar3< by wt after nine hours on stream, and its bromine number increased from 0.2 to 1 g Br/sub 2//100 ml. This inhibition was attributed to adsorption on the active acidic sites of the reaction products, particularly C/sub 10//sup +/ olefins. Catalyst stabilization could probably be achieved by selecting an appropriate solvent that would continuously desorb the inhibiting products from the catalyst surface.

  16. Forgotten names: herpetologist Boris Vladimirovich Pestinskiy

    Directory of Open Access Journals (Sweden)

    Cherlin Vladimir Alexandrovich

    2017-12-01

    Full Text Available Boris Pestinskiy was the herpetologist whose name, unfortunately, is lost in history. We decided to restore justice, and in this article we describe the life of this remarkable person. He was really engaged both in painting and in herpetology. After graduating from the Academy of Arts in Leningrad he wrote mainly the portraits of his contemporaries, illustrated magazines, taught children to draw. Some of his paintings were placed in the Russian Museum. He also studied reptiles. He was devoted to Middle Asia and spent the main part of his life in Tashkent. In Tashkent’s zoo he organized the department of reptiles and on the base of it the first in Middle Asia serpentarium. There poison was regularly taken from venomous snakes. Boris studied snakes’ biology, methods of their capture, conditions of their keeping in captivity, organization of the work of the serpentarium. His students were the young men who later became prominent Russian biologists.

  17. Four are named Editors of Earth Interactions

    Science.gov (United States)

    Eric J. Barron of the Earth System Science Center at The Pennsylvania State University has been named chief editor of the new electronic journal, Earth Interactions. This journal will be co-published by AGU, the American Meteorological Society, and the Association of American Geographers. The three societies jointly agreed on the appointment of Barron. Each of the societies also appointed an editor to the board. George F. Hepner for AAG is from the Department of Geography at the University of Utah, David T. Sandwell for AGU is at the Institute of Geophysics and Planetary Physics at Scripps Institution of Oceanography, and Kevin E. Trenberth for AMS is at the Climate and Global Dynamics Division at the National Center for Atmospheric Research.

  18. Recognition of names of eminent psychologists.

    Science.gov (United States)

    Duncan, C P

    1976-10-01

    Faculty members, graduate students, undergraduate majors, and introductory psychology students checked those names they recognized in the list of 228 deceased psychologists, rated for eminence, provided by Annin, Boring, and Watson. Mean percentage recognition was less than 50% for the 128 American psychologists, and less than 25% for the 100 foreign psychologists, by the faculty subjects. The other three groups of subjects gave even lower recognition scores. Recognition was probably also influenced by recency; median year of death of the American psychologists was 1955, of the foreign psychologists, 1943. High recognition (defined as recognition by 80% or more of the faculty group) was achieved by only 34 psychologists, almost all of them American. These highly recognized psychologists also had high eminence ratings, but there was an equal number of psychologists with high eminence ratings that were poorly recognized.

  19. Named data networking-based smart home

    Directory of Open Access Journals (Sweden)

    Syed Hassan Ahmed

    2016-09-01

    Full Text Available Named data networking (NDN treats content/data as a “first class citizen” of the network by giving it a “name”. This content “name” is used to retrieve any information, unlike in device-centric networks (i.e., the current Internet, which depend on physical IP addresses. Meanwhile, the smart home concept has been gaining attention in academia and industries; various low-cost embedded devices are considered that can sense, process, store, and communicate data autonomously. In this paper, we study NDN in the context of smart-home communications, discuss the preliminary evaluations, and describe the future challenges of applying NDN in smart-home applications.

  20. Computer Security: in the name of CERN

    CERN Multimedia

    Stefan Lueders, Computer Security Team

    2015-01-01

    This summer, the American/Canadian dating website Ashley Madison was successfully compromised by a group of hackers (see here) who subsequently published tons of confidential information: addresses, dates of birth, e-mail addresses, ethnicities, genders, names, passwords, payment histories, phone numbers, security questions, sexual preferences, usernames and website activity.   Initially, these attackers blackmailed Ashley Madison and requested that the service be shut down. Later, however, they just made their stolen data public on the Internet. More than 30 million unique e-mail addresses – a hallelujah for miscreants. What can they do with this data? One possibility is blackmailing the people whose e-mail addresses were exposed by threatening to tell their spouses (“Pay me X bitcoins or I will tell your spouse that you are looking for a date!”). Another is targeting those people who have registered with their company e-...

  1. Tough by name, tough by nature.

    Science.gov (United States)

    Baillie, Jonathan

    2015-04-01

    Few beds, one would imagine, could withstand three-quarters of a ton landing on them, but this was the challenge successfully met by a box bed from a furniture manufacturer for challenging behaviour environments, Tough Furniture, when, to reassure a customer that the bed could accommodate 30-stone patients, 13 of the company's staff jumped repeatedly on it to ensure that it would survive intact in a real-world setting. Such testing may seem extreme, but is vital, since much of the company's furniture is destined for environments where patients will abuse, and indeed attempt to destroy, components. As MD David Vesty explained to HEJ editor, Jonathan Baillie, when he visited the company's Shropshire headquarters, it is through manufacturing premium quality cabinet furniture that is both attractive and distinctly non-institutional, but will equally withstand the harshest use, that the company has ensured that its products can live up to the brand name.

  2. A changed name with an evolving function.

    Science.gov (United States)

    Xie, Z

    1995-12-01

    Changes in family planning, which took place in 1994, are described for the Mianzhu County Family Planning Committee and other townships in Sichuan Province. The Committee changed its name to Population Committee. The administrative structure changed at the town and township level. The Secretary of the Chinese Communist Party assigned the former Director of the township Family Planning Office to serve as Director of the General Office of township Population Committee. This administrative change did not take place in the county office. Reforms at the county level were expected to be more gradual, since there was no other model elsewhere in China to follow. The name change reflected a change in function and not a decline in family planning. The function will include implementation, management, and coordination instead of just fertility control. The Committee joined with the Women's Federation in offering premarital education to young people and in establishing a kindergarten for 3-5 year old children. In Qifu there were 18 township businesses, which hired surplus labor. In Qifu preferential treatment in hiring was given to single-child and two-daughter families. Wage labor has resulted in higher income and less time in the fields. The average Qifu township income in 1994 was 1250 yuan. 3200 of the 6100 single-child households were given elderly insurance by the Population Committee. In Dongbei town 4173 households had single children (56.4% of total households). In 1994 average household yearly income was 1400 yuan. 3350 households (80.2% of total single-child households) had an average yearly income of 1500-3000 yuan. 307 households (7.5%) had a yearly income of 3000-5000 yuan. 100 households (2.5%) had income greater than 5000 yuan.

  3. Brand Suicide? Memory and Liking of Negative Brand Names.

    Science.gov (United States)

    Guest, Duncan; Estes, Zachary; Gibbert, Michael; Mazursky, David

    2016-01-01

    Negative brand names are surprisingly common in the marketplace (e.g., Poison perfume; Hell pizza, and Monster energy drink), yet their effects on consumer behavior are currently unknown. Three studies investigated the effects of negative brand name valence on brand name memory and liking of a branded product. Study 1 demonstrates that relative to non-negative brand names, negative brand names and their associated logos are better recognised. Studies 2 and 3 demonstrate that negative valence of a brand name tends to have a detrimental influence on product evaluation with evaluations worsening as negative valence increases. However, evaluation is also dependent on brand name arousal, with high arousal brand names resulting in more positive evaluations, such that moderately negative brand names are equally as attractive as some non-negative brand names. Study 3 shows evidence for affective habituation, whereby the effects of negative valence reduce with repeated exposures to some classes of negative brand name.

  4. Brand Suicide? Memory and Liking of Negative Brand Names

    Science.gov (United States)

    Guest, Duncan; Estes, Zachary; Gibbert, Michael; Mazursky, David

    2016-01-01

    Negative brand names are surprisingly common in the marketplace (e.g., Poison perfume; Hell pizza, and Monster energy drink), yet their effects on consumer behavior are currently unknown. Three studies investigated the effects of negative brand name valence on brand name memory and liking of a branded product. Study 1 demonstrates that relative to non-negative brand names, negative brand names and their associated logos are better recognised. Studies 2 and 3 demonstrate that negative valence of a brand name tends to have a detrimental influence on product evaluation with evaluations worsening as negative valence increases. However, evaluation is also dependent on brand name arousal, with high arousal brand names resulting in more positive evaluations, such that moderately negative brand names are equally as attractive as some non-negative brand names. Study 3 shows evidence for affective habituation, whereby the effects of negative valence reduce with repeated exposures to some classes of negative brand name. PMID:27023872

  5. Brand Reputation and the Cost of Capital: Evidence of Adopting a Brand Name as the Corporate Name

    OpenAIRE

    YiLin Wu

    2011-01-01

    This paper studies how the capital market perceives brand name adoption. I distinguish between brand adoption and radical type of corporate name change. A brand adoption name change occurs when the firm adopts one of its well-established brands as its new corporate name and a radical type occurs when the new name is semantically unrelated to firm history. Improved profitability and increased net investment accompany brand name adoption. After controlling for changes in the competing informati...

  6. What's in a name? Group fitness class names and women's reasons for exercising.

    Science.gov (United States)

    Brown, Theresa C; Miller, Bridget M; Adams, Bailey M

    2017-01-01

    The benefits of intrinsic exercise motivation are well recognized, yet extrinsically focused group-fitness class names/descriptions dominate the fitness industry. To explore the impact of how fitness classes are marketed, women (N = 389) were asked to indicate their preference for either intrinsically or extrinsically focused fitness classes based on title/description. Participants who favored intrinsic class names/descriptions were more likely to report greater interest/enjoyment, perceived competence, and greater effort and report exercising for health/fitness-related reasons. Those favoring extrinsic class names/descriptions were more likely to experience tension/pressure when exercising and report exercising for appearance/weight-related reasons. The results demonstrate the importance of wording when marketing fitness classes.

  7. Naming Lunar Mare Basalts: Quo Vadimus Redux

    Science.gov (United States)

    Ryder, G.

    1999-01-01

    Nearly a decade ago, I noted that the nomenclature of lunar mare basalts was inconsistent, complicated, and arcane. I suggested that this reflected both the limitations of our understanding of the basalts, and the piecemeal progression made in lunar science by the nature of the Apollo missions. Although the word "classification" is commonly attached to various schemes of mare basalt nomenclature, there is still no classification of mare basalts that has any fundamental grounding. We remain basically at a classification of the first kind in the terms of Shand; that is, things have names. Quoting John Stuart Mill, Shand discussed classification of the second kind: "The ends of scientific classification are best answered when the objects are formed into groups respecting which a greater number of propositions can be made, and those propositions more important than could be made respecting any other groups into which the same things could be distributed." Here I repeat some of the main contents of my discussion from a decade ago, and add a further discussion based on events of the last decade. A necessary first step of sample studies that aims to understand lunar mare basalt processes is to associate samples with one another as members of the same igneous event, such as a single eruption lava flow, or differentiation event. This has been fairly successful, and discrete suites have been identified at all mare sites, members that are eruptively related to each other but not to members of other suites. These eruptive members have been given site-specific labels, e.g., Luna24 VLT, Apollo 11 hi-K, A12 olivine basalts, and Apollo 15 Green Glass C. This is classification of the first kind, but is not a useful classification of any other kind. At a minimum, a classification is inclusive (all objects have a place) and exclusive (all objects have only one place). The answer to "How should rocks be classified?" is far from trivial, for it demands a fundamental choice about nature

  8. Recommended conservation of the names Streptococcus sanguis, Streptococcus rattus, Streptococcus cricetus, and seven other names included in the Approved Lists of Bacterial Names. Request for an opinion

    DEFF Research Database (Denmark)

    Kilian, Mogens

    2001-01-01

    With reference to the first Principle of the International Code of Nomenclature of Bacteria, which emphasizes stability of names, it is proposed that the original names Streptococcus sanguis, Streptococcus rattus, Streptococcus cricetus, Erwinia ananas, Eubacterium tarantellus, Lactobacillus sake......, Nitrosococcus oceanus, Pseudomonas betle, Rickettsia canada and Streptomyces rangoon, all included in the Approved Lists of Bacterial Names, be conserved. Request for an Opinion...

  9. VLT Unit Telescopes Named at Paranal Inauguration

    Science.gov (United States)

    1999-03-01

    General, speeches were delivered by the President of the ESO Council and the President of Chile. The speakers praised the great achievement of bringing the very complex, high-technology VLT project this far so successfully and also the wonderful new opportunities for front-line research with this new facility. This would not have been possible without excellent cooperation between the many parties to this project, individuals as well as research institutes, companies and governments, all working towards a common goal. The ceremony was concluded with a discourse on "Understanding the Universe" by Physics Nobel Prize winner, Professor Carlo Rubbia, former Director of CERN. At the end of the day, the President of the ESO Council, the ESO Director General and the Heads of Delegations had the opportunity to witness an observing session with the UT1 from the VLT Control Room. The 300 other guests followed this event via internal video broadcast. Mapuche names for the Unit Telescopes It had long been ESO's intention to provide "real" names to the four VLT Unit Telescopes, to replace the current, somewhat dry and technical designations as UT1 to UT4. Four meaningful names of objects in the sky in the Mapuche language were chosen. This indigeneous people lives mostly in the area south of Santiago de Chile. An essay contest was arranged in this connection among schoolchildren of the Chilean II Region of which Antofagasta is the capital to write about the implications of these names. It drew many excellent entries dealing with the rich cultural heritage of ESO's host country. The jury was unanimous in its choice of the winning essay. This was submitted by 17-year old Jorssy Albanez Castilla from Chuquicamata near the city of Calama. She received the prize, an amateur telescope, during the Paranal Inauguration. Henceforth, the four Unit Telescopes will be known as ANTU (UT1; pronounced an-too ; The Sun), KUEYEN (UT2; qua-yen , like in "quake"; The Moon), MELIPAL (UT3; me-li-pal ; The

  10. Is visual attention automatically attracted to one's own name?

    DEFF Research Database (Denmark)

    Bundesen, C; Kyllingsbæk, Søren; Houmann, K J

    1997-01-01

    Subjects were presented with briefly exposed visual displays of words that were common first names with a length of four to six letters. In the main experiment, each display consisted of four words: two names shown in red and two shown in white. The subject's task was to report the red names (tar......, visual attention was not automatically attracted by the subject's own name....

  11. An Exploratory Study Of The Meaning And Perception Of Names ...

    African Journals Online (AJOL)

    In Nigeria, personal names particularly indigenous names are not arbitrarily given, they bear significant connotative meanings, reflecting the circumstance surrounding the birth of the bearer and the belief and philosophy of the name giver. The significance placed on names gives it immense psychological undertones.

  12. 37 CFR 10.35 - Firm names and letterheads.

    Science.gov (United States)

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Firm names and letterheads... Office Code of Professional Responsibility § 10.35 Firm names and letterheads. (a) A practitioner shall not use a firm name, letterhead, or other professional designation that violates § 10.31. A trade name...

  13. 48 CFR 52.211-6 - Brand name or equal.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Brand name or equal. 52....211-6 Brand name or equal. As prescribed in 11.107(a), insert the following provision: Brand Name or Equal (AUG 1999) (a) If an item in this solicitation is identified as “brand name or equal,” the...

  14. 27 CFR 1.40 - Change of name.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Change of name. 1.40... Amendment and Duration of Basic Permits § 1.40 Change of name. In the event of any change in the name (trade or corporate name) of a permittee, or, in the event a permittee desires to engage in operations under...

  15. 27 CFR 40.511 - Change in name.

    Science.gov (United States)

    2010-04-01

    ... corporate name. When there is a change in the corporate name of a manufacturer of processed tobacco, the... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Change in name. 40.511... PROCESSED TOBACCO Manufacture of Processed Tobacco Changes After Qualification § 40.511 Change in name. (a...

  16. 27 CFR 41.222 - Change in corporate name.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Change in corporate name... Change in corporate name. Where there is a change in the corporate name of an importer of tobacco... corporate name has been changed. [T.D. ATF-422, 64 FR 71953, Dec. 22, 1999. Redesignated and amended by T.D...

  17. The proper name as starting point for basic reading skills

    NARCIS (Netherlands)

    Both-De Vries, Anna C.; Bus, Adriana G

    Does alphabetic-phonetic writing start with the proper name and how does the name affect reading and writing skills? Sixty 4- to 5(1/2)-year-old children from middle SES families with Dutch as their first language wrote their proper name and named letters. For each child we created unique sets of

  18. Parents' Perspectives on Adopting English Names in Taiwan

    Science.gov (United States)

    Huang, Chiu-Yen; Ke, I-Chung

    2016-01-01

    This study investigated the adoption of English names in Taiwan through questionnaires and interviews with parents of junior high school students. In total, 564 parents filled out a questionnaire regarding their adoption of an English name, reasons for needing an English name, and their perspectives about their child's English name. We interviewed…

  19. Spent catalyst waste management. A review. Part 1. Developments in hydroprocessing catalyst waste reduction and use

    Energy Technology Data Exchange (ETDEWEB)

    Marafi, M.; Stanislaus, A. [Petroleum Refining Department, Petroleum Research and Studies Center, Kuwait Institute for Scientific Research, P.O. Box 24885, 13109-Safat (Kuwait)

    2008-04-15

    Solid catalysts containing metals, metal oxides or sulfides, which play a key role in the refining of petroleum to clean fuels and many other valuable products, become solid wastes after use. In many refineries, the spent catalysts discarded from hydroprocessing units form a major part of these solid wastes. Disposal of spent hydroprocessing catalysts requires compliance with stringent environmental regulations because of their hazardous nature and toxic chemicals content. Various options such as minimizing spent catalyst waste generation by regeneration and reuse, metals recovery, utilization to produce useful materials and treatment for safe disposal, could be considered to deal with the spent catalyst environmental problem. In this paper, information available in the literature on spent hydroprocessing catalyst waste reduction at source by using improved more active and more stable catalysts, regeneration, rejuvenation and reuse of deactivated catalysts in many cycles, and reusing in other processes are reviewed in detail with focus on recent developments. Available methods for recycling of spent hydroprocessing catalysts by using them as raw materials for the preparation of active new catalysts and many other valuable products are also reviewed. (author)

  20. Catalysts, Protection Layers, and Semiconductors

    DEFF Research Database (Denmark)

    Chorkendorff, Ib

    2015-01-01

    Hydrogen is the simplest solar fuel to produce and in this presentation we shall give a short overview of the pros and cons of various tandem devices [1]. The large band gap semiconductor needs to be in front, but apart from that we can chose to have either the anode in front or back using either...... acid or alkaline conditions. Since most relevant semiconductors are very prone to corrosion the advantage of using buried junctions and using protection layers offering shall be discussed [2-4]. Next we shall discuss the availability of various catalysts for being coupled to these protections layers...... and how their stability may be evaluated [5, 6]. Examples of half-cell reaction using protection layers for both cathode and anode will be discussed though some of recent examples under both alkaline and acidic conditions. Si is a very good low band gap semiconductor and by using TiO2 as a protection...

  1. Fundamental investigations of catalyst nanoparticles

    DEFF Research Database (Denmark)

    Elkjær, Christian Fink

    and economic development in the 20th century. There is however a downside to this development and we are seeing significant pollution and pressure on resources. Catalysis therefore has an increasingly important role in limiting pollution and optimizing the use of resources. This development will depend on our...... fundamental understanding of catalytic processes and our ability to make use of that understanding. This thesis presents fundamental studies of catalyst nanoparticles with particular focus on dynamic processes. Such studies often require atomic-scale characterization, because the catalytic conversion takes...... important that we only study intrinsic structures and phenomena and not those that may be induced by the high energy electrons used to image the specimen. This requires careful consideration of the influence of the electron beam in order to understand, control and minimize that influence. I present four...

  2. A Discrete Model for Color Naming

    Directory of Open Access Journals (Sweden)

    J. M. Boi

    2007-01-01

    Full Text Available The ability to associate labels to colors is very natural for human beings. Though, this apparently simple task hides very complex and still unsolved problems, spreading over many different disciplines ranging from neurophysiology to psychology and imaging. In this paper, we propose a discrete model for computational color categorization and naming. Starting from the 424 color specimens of the OSA-UCS set, we propose a fuzzy partitioning of the color space. Each of the 11 basic color categories identified by Berlin and Kay is modeled as a fuzzy set whose membership function is implicitly defined by fitting the model to the results of an ad hoc psychophysical experiment (Experiment 1. Each OSA-UCS sample is represented by a feature vector whose components are the memberships to the different categories. The discrete model consists of a three-dimensional Delaunay triangulation of the CIELAB color space which associates each OSA-UCS sample to a vertex of a 3D tetrahedron. Linear interpolation is used to estimate the membership values of any other point in the color space. Model validation is performed both directly, through the comparison of the predicted membership values to the subjective counterparts, as evaluated via another psychophysical test (Experiment 2, and indirectly, through the investigation of its exploitability for image segmentation. The model has proved to be successful in both cases, providing an estimation of the membership values in good agreement with the subjective measures as well as a semantically meaningful color-based segmentation map.

  3. A Discrete Model for Color Naming

    Science.gov (United States)

    Menegaz, G.; Le Troter, A.; Sequeira, J.; Boi, J. M.

    2006-12-01

    The ability to associate labels to colors is very natural for human beings. Though, this apparently simple task hides very complex and still unsolved problems, spreading over many different disciplines ranging from neurophysiology to psychology and imaging. In this paper, we propose a discrete model for computational color categorization and naming. Starting from the 424 color specimens of the OSA-UCS set, we propose a fuzzy partitioning of the color space. Each of the 11 basic color categories identified by Berlin and Kay is modeled as a fuzzy set whose membership function is implicitly defined by fitting the model to the results of an ad hoc psychophysical experiment (Experiment 1). Each OSA-UCS sample is represented by a feature vector whose components are the memberships to the different categories. The discrete model consists of a three-dimensional Delaunay triangulation of the CIELAB color space which associates each OSA-UCS sample to a vertex of a 3D tetrahedron. Linear interpolation is used to estimate the membership values of any other point in the color space. Model validation is performed both directly, through the comparison of the predicted membership values to the subjective counterparts, as evaluated via another psychophysical test (Experiment 2), and indirectly, through the investigation of its exploitability for image segmentation. The model has proved to be successful in both cases, providing an estimation of the membership values in good agreement with the subjective measures as well as a semantically meaningful color-based segmentation map.

  4. A public health physician named Walter Leser.

    Science.gov (United States)

    Mello, Guilherme Arantes; Bonfim, José Ruben de Alcântara

    2015-09-01

    A brief review of the career of the public health physician Walter Sidney Pereira Leser, who died in 2004 aged 94. Self-taught, from his 1933 doctoral thesis he became a country reference in the field of statistics and epidemiology, with dozens of studies and supervisions. In the clinical field he is one of the founders of Fleury Laboratory, and participates in the creation of CREMESP. As an academic, Leser was a professor at the Escola de Sociologia e Política de São Paulo, Escola Paulista de Medicina e Faculdade de Farmácia e Odontologia da USP. Also, Leser introduced objective tests in the college entrance examination, and led the creation of CESCEM and Carlos Chagas Foundation. In the Escola Paulista de Medicina he created the first Preventive Medicine Department of the country. As a public official, he was secretary of the State Department of Health of São Paulo between 1967 and 1971 and between 1975 and 1979, responsible for extensive reforms and innovations. Among the most remembered, the creation of sanitary medical career. Throughout this legacy, he lent his name to the "Medal of Honor and Merit Public Health Management" of the State of São Paulo.

  5. SMC 1 or What's in a Name?

    Science.gov (United States)

    Dickel, H. R.

    What's in a name? everything! SMC 1 is a planetary nebula in the Large Magellanic Cloud! This new planetary nebula near the LMC was noted by Savage, Murdin and Clark (in The Observatory 1982); it is also known as SMP LMC 104A (Sanduleak, MacConnell, and Philip in PASP 1978). In an effort to promote clear and unambiguous identification of all astronomical objects outside the solar system, the IAU Task Group on Designations attempts to clarify existing astronomical designations and the TG reviews, updates, and advertises the IAU Recommendations for Nomenclature. The following documents on the Web are provided as a service to astronomers to help them with designating astronomical sources of radiation outside the solar system: How to refer to a source or designate a new one: instructions IAU Recommendations for Nomenclature: nomenclature Second Reference Dictionary of Nomenclature of Celestial Objects: dictionary **NEW** (pre-)Registry of New Acronyms: acronym registry The Task Group in collaboration with several editors of astronomical journals and managers of large data archives is now studying the feasibility of an automated system to detect nonconforming designations when an article and/or survey data are submitted for publication and/or to an electronic archive. H. Dickel is available during the Symposium to discuss your designation concerns and to offer possible solutions.

  6. Anatomical eponyms - unloved names in medical terminology.

    Science.gov (United States)

    Burdan, F; Dworzański, W; Cendrowska-Pinkosz, M; Burdan, M; Dworzańska, A

    2016-01-01

    Uniform international terminology is a fundamental issue of medicine. Names of various organs or structures have developed since early human history. The first proper anatomical books were written by Hippocrates, Aristotle and Galen. For this reason the modern terms originated from Latin or Greek. In a modern time the terminology was improved in particular by Vasalius, Fabricius and Harvey. Presently each known structure has internationally approved term that is explained in anatomical or histological terminology. However, some elements received eponyms, terms that incorporate the surname of the people that usually describe them for the first time or studied them (e.g., circle of Willis, follicle of Graff, fossa of Sylvious, foramen of Monro, Adamkiewicz artery). Literature and historical hero also influenced medical vocabulary (e.g. Achilles tendon and Atlas). According to various scientists, all the eponyms bring colour to medicine, embed medical traditions and culture to our history but lack accuracy, lead of confusion, and hamper scientific discussion. The current article presents a wide list of the anatomical eponyms with their proper anatomical term or description according to international anatomical terminology. However, since different eponyms are used in various countries, the list could be expanded.

  7. BDNLS - BESSY device name location service

    International Nuclear Information System (INIS)

    Engel, D.; Laux, P.; Mueller, R.

    2012-01-01

    Initially the relational database (RDB) for control system configuration at BESSY has been built around the device concept. Maintenance and consistency issues as well as complexity of scripts generating the configuration data, triggered the development of a novel, generic RDB structure based on hierarchies of named nodes with attribute/ value pairs. Unfortunately, it turned out that usability of this generic RDB structure for a comprehensive configuration management relies on sophisticated data maintenance tools. On this background BDNLS, a new database management tool, is currently under development using the framework of the Eclipse Rich Client Platform. It uses the Model View Controller (MVC) layer of JFace to cleanly separate retrieval processes, data path, data visualization and actualization. It is based on extensible configurations defined in XML allowing to chain SQL calls and compose profiles for various cases. It solves the problem of data key forwarding to the subsequent SQL statement. BDNLS has the potential to map various levels of complexity into the XML configurations. This provides usable, tailored database access to configuration maintainers for different underlying database structures. Based on Eclipse, the integration of BDNLS into Control System Studio is straight forward. (authors)

  8. Method and System for Name Resolution Across Heterogeneous Architectures

    Science.gov (United States)

    Sevilla, Spencer (Inventor); Mahadevan, Priya (Inventor); Garcia-Luna-Aceves, Jose J. (Inventor)

    2018-01-01

    One embodiment of the present invention provides a system for resolving a name request in a network comprising a plurality of groups that use different name-resolution schemes. During operation, the system receives, at a first group, the name request; identifies a parent group of the first group, which is a member of the parent group; and in response to failing to resolve the name request within the first group, forwards the name request to the identified parent group.

  9. 27 CFR 46.126 - Change in name or address.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Change in name or address... (occupational) Tax Stamps § 46.126 Change in name or address. (a) Change in name. If there is a change in the corporate or firm name, or in the trade name, as shown on TTB Form 5630.5t, the taxpayer must file an...

  10. Improved Vocabulary Production after Naming Therapy in Aphasia: Can Gains in Picture Naming Generalise to Connected Speech?

    Science.gov (United States)

    Conroy, Paul; Sage, Karen; Ralph, Matt Lambon

    2009-01-01

    Background: Naming accuracy for nouns and verbs in aphasia can vary across different elicitation contexts, for example, simple picture naming, composite picture description, narratives, and conversation. For some people with aphasia, naming may be more accurate to simple pictures as opposed to naming in spontaneous, connected speech; for others,…

  11. Temporal Features of the Differentiation between Self-Name and Religious Leader Name among Christians: An ERP Study

    Directory of Open Access Journals (Sweden)

    Ruixue Xia

    2018-01-01

    Full Text Available Existing neuroimaging studies have shown that religion, as a subjective culture, can influence self-referential processing. However, the time course of this impact remains unclear. The present study examined how Christians process their own names, the name of their religious leader (i.e., Jesus, and a famous person’s name (i.e., Yao Ming. Behavioral and EEG data were recorded while the participants performed a name-color judgment task for these three names. The behavioral data showed no significant differences in reaction time or accuracy among the names. However, the ERP data showed that the P200 and P300 amplitudes elicited by the self-name and religious leader name were larger than those elicited by the famous name. Furthermore, the self-name also elicited a larger P300 amplitude than the religious leader name did. These results suggested that both the self-name and the religious leader name were processed preferentially due to their important social value for the self as compared to a generally famous name. Importantly, the dissociation between the self-name and the religious leader name was observed at a high-order cognitive stage, which might be attributed to their different roles in one’s self-concept.

  12. Characterization of three-way automotive catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Kenik, E.A.; More, K.L. [Oak Ridge National Laboratory, TN (United States); LaBarge, W. [General Motors-AC Delco Systems, Flint, MI (United States)] [and others

    1995-05-01

    This has been the second year of a CRADA between General Motors - AC Delco Systems (GM-ACDS) and Martin Marietta Energy Systems (MMES) aimed at improved performance/lifetime of platinum-rhodium based three-way-catalysts (TWC) for automotive emission control systems. While current formulations meet existing emission standards, higher than optimum Pt-Rh loadings are often required. In additionk, more stringent emission standards have been imposed for the near future, demanding improved performance and service life from these catalysts. Understanding the changes of TWC conversion efficiency with ageing is a critical need in improving these catalysts.

  13. Catalyst for hydrogen-amine D exchange

    International Nuclear Information System (INIS)

    Holtslander, W.J.; Johnson, R.E.

    1976-01-01

    A process is claimed for deuterium isotopic enrichment (suitable for use in heavy water production) by amine-hydrogen exchange in which the exchange catalyst comprises a mixture of alkyl amides of two metals selected from the group consisting of the alkali metals. Catalyst mixtures comprising at least one of the alkali amides of lithium and potassium are preferred. At least one of the following benefits are obtained: decreased hydride formation, decreased thermal decomposition of alkyl amide, increased catalyst solubility in the amine phase, and increased exchange efficiency. 11 claims

  14. deNOx catalysts for biomass combustion

    DEFF Research Database (Denmark)

    Kristensen, Steffen Buus

    The present thesis revolves around the challenges involved in removal of nitrogen oxides in biomass fired power plants. Nitrogen oxides are unwanted byproducts formed to some extent during almost any combustion. In coal fired plants these byproducts are removed by selective catalytic reduction......, however the alkali in biomass complicate matters. Alkali in biomass severely deactivates the catalyst used for the selective catalytic reduction in matter of weeks, hence a more alkali resistant catalyst is needed. In the thesis a solution to the problem is presented, the nano particle deNOx catalyst...

  15. Towards the computational design of solid catalysts

    DEFF Research Database (Denmark)

    Nørskov, Jens Kehlet; Bligaard, Thomas; Rossmeisl, Jan

    2009-01-01

    Over the past decade the theoretical description of surface reactions has undergone a radical development. Advances in density functional theory mean it is now possible to describe catalytic reactions at surfaces with the detail and accuracy required for computational results to compare favourably...... with experiments. Theoretical methods can be used to describe surface chemical reactions in detail and to understand variations in catalytic activity from one catalyst to another. Here, we review the first steps towards using computational methods to design new catalysts. Examples include screening for catalysts...

  16. Grafting heterogeneous catalyst with gamma radiation

    International Nuclear Information System (INIS)

    Garnett, J.L.; Long, M.A.; Levot, R.G.

    1984-01-01

    A process for the production of a heterogeneous catalyst comprises the steps of: irradiating an organic macromolecular substrate or a metal substrate with ionising or ultra violet radiation in the presence of a monomer selected from the group consisting of o-, m-, or p- styryl diphenyl phosphine and o-, m- or p- phenyl acrylyl diphenyl phosphine, to graft the monomer to the substrate; and reacting the graft copolymer with a homogeneous catalyst selected from the group consisting of catalytic metal salts and catalytic organometallic complexes such that the graft copolymer conjugate becomes a ligand of the catalyst

  17. Designing Pd-based supported bimetallic catalysts for environmental applications

    OpenAIRE

    Nowicka, Ewa; Meenakshisundaram, Sankar

    2018-01-01

    Supported bimetallic nanoparticulate catalysts are an important class of heterogeneous catalysts for many reactions including selective oxidation, hydrogenation/hydrogenolysis, reforming, biomass conversion reactions, and many more. The activity, selectivity, and stability of these catalysts depend on their structural features including particle size, composition, and morphology. In this review, we present important structural features relevant to supported bimetallic catalysts focusing on Pd...

  18. 40 CFR 90.427 - Catalyst thermal stress resistance evaluation.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Catalyst thermal stress resistance... Gaseous Exhaust Test Procedures § 90.427 Catalyst thermal stress resistance evaluation. (a) The purpose of... catalyst conversion efficiency for Phase 1 engines. The thermal stress is imposed on the test catalyst by...

  19. Bio-oil hydrodeoxygenation catalysts produced using strong electrostatic adsorption

    Science.gov (United States)

    We synthesized hydrothermally stable metal catalysts with controlled particle size and distribution, with the goal of determining which catalyst(s) can selectively catalyze the production of aromatics from bio-oil (from pyrolysis of biomass). Both precious and base transition metal catalysts (Ru, Pt...

  20. Chemical Recycling of PET Wastes with Different Catalysts

    Directory of Open Access Journals (Sweden)

    Mohammad Khoonkari

    2015-01-01

    Full Text Available Chemical recycling of polyethylene terephthalate, known as PET, has been the subject of increased interest as a valuable feedstock for different chemical processes. In this work, glycolysis of PET waste granules was carried out using excess ethylene glycol in the presence of different simple chemicals acting as catalysts, which are, namely, categorized in ionic liquids, metal salts, hydrotalcites, and enzymes. From every category, some materials as a sample were used, and the one which is going to bring the best result is noted. The effect of some parameters such as temperature, pressure, amount of sample, material ratio, and stirring rate was investigated. As a result we compared the best of each category with the others and final result is shown.

  1. In-situ hydrodeoxygenation of phenol by supported Ni catalyst-explanation for catalyst performance

    DEFF Research Database (Denmark)

    Wang, Ze; Zeng, Ying; Lin, Weigang

    2017-01-01

    In-situ hydrodeoxygenation of phenol with aqueous hydrogen donor over supported Ni catalyst was investigated. The supported Ni catalysts exerted very poor performance, if formic acid was used as the hydrogen donor. Catalyst modification by loading K, Na, Mg or La salt could not make the catalyst...... performance improved. If gaseous hydrogen was used as the hydrogen source the activity of Ni/Al2O3 was pretty high. CO2 was found poisonous to the catalysis, due to the competitive adoption of phenol with CO2. If formic acid was replaced by methanol, the catalyst performance improved remarkably, with major...... products of cyclohexanone and cyclohexanol. The better effect of methanol enlightened the application of the supported Ni catalyst in in-situ hydrodeoxygenation of phenol....

  2. Effect of coke and catalyst structure on oxidative regeneration of hydroprocessing catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Furimsky, E. (CANMET, Ottawa, ON (Canada). Energy Research Laboratories)

    1991-04-01

    Two industrial hydroprocessing catalysts used for upgrading an atmospheric residue and a gas oil, respectively were regenerated in a fixed bed using air and 2 vol.% O{sub 2}+N{sub 2} balance mixture. The regeneration in air resulted in a significant sintering of the catalyst's material. The surface area of catalysts regenerated in 2 vol.% O{sub 2} mixture was similar to that of fresh catalysts, whereas a significant loss of surface area was observed after regeneration in air. The X-ray diffraction pattern of catalysts regenerated in 2 vol.% O{sub 2}+N{sub 2} balance mixture was also similar to that of fresh catalysts. 22 refs., 9 figs., 7 tabs.

  3. Supported catalyst systems and method of making biodiesel products using such catalysts

    Science.gov (United States)

    Kim, Manhoe; Yan, Shuli; Salley, Steven O.; Ng, K. Y. Simon

    2015-10-20

    A heterogeneous catalyst system, a method of preparing the catalyst system and a method of forming a biodiesel product via transesterification reactions using the catalyst system is disclosed. The catalyst system according to one aspect of the present disclosure represents a class of supported mixed metal oxides that include at least calcium oxide and another metal oxide deposited on a lanthanum oxide or cerium oxide support. Preferably, the catalysts include CaO--CeO.sub.2ZLa.sub.2O.sub.3 or CaO--La.sub.2O.sub.3/CeO.sub.2. Optionally, the catalyst may further include additional metal oxides, such as CaO--La.sub.2O.sub.3--GdOxZLa.sub.2O.sub.3.

  4. CATALYSTS BASED ON UKRAINIAN NATURAL SORBENTS FOR LOW-TEMPERATURE CARBON MONOXIDE OXIDATION MEANT FOR INDIVIDUAL RESPIRATORY PROTECTIVE DEVICES

    Directory of Open Access Journals (Sweden)

    T. L. Rakyts’ka

    2015-11-01

    Full Text Available In spite of a great number of patented formulas of catalysts for neutralization of carbon monoxide (CO which is the most widespread atmospheric pollutant, only batch-produced hopcalite and alumina supported palladium (Pd/Al2O3 are used in practice. The named catalysts have significant defects: hopcalite is poisonable in the presence of water vapor and Pd/Al2O3 is characterized by the great content of palladium. We have found the possibility of using inexpensive Ukrainian natural sorbents differing by their mineralogical and chemical compositions, i.e. zeolites, bentonites, basalt tuffs, and disperse silicas, as supports for development and subsequent application of palladium(II and copper(II based catalysts for carbon monoxide oxidation. Acid-thermally modified Ukrainian sorbents have been found to be proper for obtaining supported copper-palladium complexes the most catalytically active in the reaction. Application of Ukrainian natural tripolis permitted to avoid the step of acid-thermal modification complicating the technique of catalyst production. As was found, the origin and phase composition of tripolis affect the activity of catalysts supported on them in the reaction of low-temperature Co oxidation. The most active catalyst permitting sanitary purification of air from CO to a level permissible for atmosphere of populated areas have been obtained in the case of insignificantly (thermally or hydrothermally modified tripoli from Konoplianskoe deposit.

  5. The National Geographic Names Data Base: Phase II instructions

    Science.gov (United States)

    Orth, Donald J.; Payne, Roger L.

    1987-01-01

    The Geographic Names Information System is a computer-based information system developed to meet major national needs by providing information for named entities in the United States, its territories, and outlying areas. The National Geographic Names Data Base, a component of the Geographic Names Information System, currently contains most names and associated information recorded on the 1:24,000-scale (or largest scale available) topographic maps of the U.S. Geological Survey. The work involved in this initial compilation of names shown on the topographic-map series, and the development and editing of the National Geographic Names Data Base, is referred to as Phase I. Optimal use and effectiveness of an automated names system require that the names of features

  6. Fast, Inclusive Searches for Geographic Names Using Digraphs

    Science.gov (United States)

    Donato, David I.

    2008-01-01

    An algorithm specifies how to quickly identify names that approximately match any specified name when searching a list or database of geographic names. Based on comparisons of the digraphs (ordered letter pairs) contained in geographic names, this algorithmic technique identifies approximately matching names by applying an artificial but useful measure of name similarity. A digraph index enables computer name searches that are carried out using this technique to be fast enough for deployment in a Web application. This technique, which is a member of the class of n-gram algorithms, is related to, but distinct from, the soundex, PHONIX, and metaphone phonetic algorithms. Despite this technique's tendency to return some counterintuitive approximate matches, it is an effective aid for fast, inclusive searches for geographic names when the exact name sought, or its correct spelling, is unknown.

  7. Growth of vertically aligned single-walled carbon nanotubes with metallic chirality through faceted FePt-Au catalysts

    Science.gov (United States)

    Ohashi, Toshiyuki; Iwama, Hiroki; Shima, Toshiyuki

    2016-02-01

    Direct synthesis of vertically aligned metallic single-walled carbon nanotubes (m-SWCNT forests) is a difficult challenge. We have successfully synthesized m-SWCNT forests using faceted iron platinum-gold catalysts epitaxially grown on a single crystalline magnesium oxide substrate. The metallic content of the forests estimated by Raman spectroscopy reaches 90%. From the standpoint of growth rate of the forests, the growth mechanism is probably based on the catalyst of solid state. It is suggested that preferential growth of m-SWCNTs is achieved when both factors are satisfied, namely, {111} dominant octahedral facet and ideal size (fine particles) of FePt particles.

  8. Mordenite - Type Zeolite SCR Catalysts with Iron or Copper

    DEFF Research Database (Denmark)

    2012-01-01

    Cu/mordenite catalysts were found to be highly active for the SCR of NO with NH3 and exhibited high resistance to alkali poisoning. Redox and acidic properties of Cu/mordenite were well preserved after poisoning with potassium unlike that of vanadium catalysts. Fe-mordenite catalysts also reveale...... to be essential requirements for the high alkali resistance. Mordenite-type zeolite based catalysts could therefore be attractive alternatives to conventional SCR catalysts for biomass fired power plant flue gas treatment....

  9. Preparative characteristics of hydrophobic polymer catalyst for the tritium removal

    International Nuclear Information System (INIS)

    Kang, Hee Suk; Choi, H. J.; Lee, H. S.; Ahn, D. H.; Kim, K. R.; Paek, S. W.; Paek, S. W.; Kim, J. G.; Chung, H. S.

    2001-05-01

    The optimum method for the fabrication of hydrophobic catalyst was selected and the apparatuses for the preparation of catalyst support with high yield was developed for the large scale production. Also, we summarized the method of improving the physical property of the catalyst support, the loading characteristics of Pt metal as a catalyst, and the characteristics of the apparatus for the fabrication of the catalysts on a large scale

  10. Preparative characteristics of hydrophobic polymer catalyst for the tritium removal

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Hee Suk; Choi, H. J.; Lee, H. S.; Ahn, D. H.; Kim, K. R.; Paek, S. W.; Kim, J. G.; Chung, H. S

    2001-05-01

    The optimum method for the fabrication of hydrophobic catalyst was selected and the apparatuses for the preparation of catalyst support with high yield was developed for the large scale production. Also, we summarized the method of improving the physical property of the catalyst support, the loading characteristics of Pt metal as a catalyst, and the characteristics of the apparatus for the fabrication of the catalysts on a large scale.

  11. Platinum-Bismuth Bimetallic Catalysts: Synthesis, Characterization and Applications

    OpenAIRE

    Saucedo, Jose A, Jr; Xiao, Yang; Varma, Arvind

    2015-01-01

    Bimetallic catalysts have been explored and shown to exhibit unique characteristics which are not present in monometallic catalysts. Platinum is well known as an effective catalyst for oxidation and reduction reactions, and it can be made more effective when bismuth is introduced as a promotor. Thus, the effectiveness of the Pt-Bi catalyst was demonstrated in prior work. What is not clear, however, is the mechanism behind the catalyst function; why addition of bismuth to platinum decreases de...

  12. Bi-metallic catalysts, methods of making, and uses thereof

    KAUST Repository

    Basset, Jean-Marie

    2017-01-19

    Provided herein are bi-metallic catalysts, methods of making, and uses thereof. In some embodiments, the bi-metallic catalyst contains two different metal catalysts that can be used in hydrocarbon metathesis reactions, in some embodiments, the methods of making the bi-metallic catalysts can include two steps utilizing a surface organometallic chemistry approach in which the two different metal catalysts are sequentially grafted onto a support.

  13. Bi-metallic catalysts, methods of making, and uses thereof

    KAUST Repository

    Basset, Jean-Marie; Samantaray, Manoja K.; Dey, Raju; Abou-Hamad, Edy; Kavitake, Santosh

    2017-01-01

    Provided herein are bi-metallic catalysts, methods of making, and uses thereof. In some embodiments, the bi-metallic catalyst contains two different metal catalysts that can be used in hydrocarbon metathesis reactions, in some embodiments, the methods of making the bi-metallic catalysts can include two steps utilizing a surface organometallic chemistry approach in which the two different metal catalysts are sequentially grafted onto a support.

  14. Heterogeneous Metal Catalysts for Oxidation Reactions

    Directory of Open Access Journals (Sweden)

    Md. Eaqub Ali

    2014-01-01

    Full Text Available Oxidation reactions may be considered as the heart of chemical synthesis. However, the indiscriminate uses of harsh and corrosive chemicals in this endeavor are threating to the ecosystems, public health, and terrestrial, aquatic, and aerial flora and fauna. Heterogeneous catalysts with various supports are brought to the spotlight because of their excellent capabilities to accelerate the rate of chemical reactions with low cost. They also minimize the use of chemicals in industries and thus are friendly and green to the environment. However, heterogeneous oxidation catalysis are not comprehensively presented in literature. In this short review, we clearly depicted the current state of catalytic oxidation reactions in chemical industries with specific emphasis on heterogeneous catalysts. We outlined here both the synthesis and applications of important oxidation catalysts. We believe it would serve as a reference guide for the selection of oxidation catalysts for both industries and academics.

  15. Environmentally benign catalysts for clean organic reactions

    CERN Document Server

    Patel, Anjali

    2013-01-01

    Heterogeneous catalysis attracts researchers and industry because it satisfies most of green chemistry's requirements. Emphasizing the development of third generation catalysts, this book surveys trends and opportunities in academic and industrial research.

  16. Oxidation catalysts and process for preparing same

    International Nuclear Information System (INIS)

    1980-01-01

    Compounds particularly suitable as oxidation catalysis are described, comprising specified amounts of uranium, antimony and tin as oxides. Processes for making and using the catalysts are described. (U.K.)

  17. Selection of catalysts and reactors for hydroprocessing

    Energy Technology Data Exchange (ETDEWEB)

    Furimsky, E. [Imaf Group, Ottawa, ON (Canada)

    1998-07-13

    The performance of hydroprocessing units can be influenced by the selection of the catalysts and the type of reactor to suit a particular feed. The catalysts and reactors selected for light feeds differ markedly from those selected for heavy feeds. Fixed-bed reactors have been traditionally used for light feeds. High asphaltene and high metal content feeds are successfully processed using moving-bed and/or ebullated bed reactors. Multi-reactor systems consisting of moving-bed and/or ebullated bed reactors in series with fixed-bed reactors can be used to process difficult feeds. For heavy feeds, the physical properties (e.g. porosity), shape and size of the catalyst particles become crucial parameters. Pretreatment of catalysts by presulfiding improves the performance of the units.

  18. Highly sensitive silicon microreactor for catalyst testing

    DEFF Research Database (Denmark)

    Henriksen, Toke Riishøj; Olsen, Jakob Lind; Vesborg, Peter Christian Kjærgaard

    2009-01-01

    by directing the entire gas flow through the catalyst bed to a mass spectrometer, thus ensuring that nearly all reaction products are present in the analyzed gas flow. Although the device can be employed for testing a wide range of catalysts, the primary aim of the design is to allow characterization of model...... catalysts which can only be obtained in small quantities. Such measurements are of significant fundamental interest but are challenging because of the low surface areas involved. The relationship between the reaction zone gas flow and the pressure in the reaction zone is investigated experimentally......, it is found that platinum catalysts with areas as small as 15 mu m(2) are conveniently characterized with the device. (C) 2009 American Institute of Physics. [doi:10.1063/1.3270191]...

  19. Finding furfural hydrogenation catalysts via predictive modelling

    NARCIS (Netherlands)

    Strassberger, Z.; Mooijman, M.; Ruijter, E.; Alberts, A.H.; Maldonado, A.G.; Orru, R.V.A.; Rothenberg, G.

    2010-01-01

    We combine multicomponent reactions, catalytic performance studies and predictive modelling to find transfer hydrogenation catalysts. An initial set of 18 ruthenium-carbene complexes were synthesized and screened in the transfer hydrogenation of furfural to furfurol with isopropyl alcohol complexes

  20. Photoexcited iron porphyrin as biomimetic catalysts

    International Nuclear Information System (INIS)

    Bartocci, C.; Maldotti, A.; Varani, G.; Consiglio Nazionale delle Ricerche, Ferrara

    1996-01-01

    Photoexcited iron porphyrins can be of some interest in both fine and industrial chemistry in view of the preparation of new efficient biomimetic catalysts, working with high selectivity under mild temperature and pressure

  1. Age of acquisition and word frequency in written picture naming.

    Science.gov (United States)

    Bonin, P; Fayol, M; Chalard, M

    2001-05-01

    This study investigates age of acquisition (AoA) and word frequency effects in both spoken and written picture naming. In the first two experiments, reliable AoA effects on object naming speed, with objective word frequency controlled for, were found in both spoken (Experiment 1) and written picture naming (Experiment 2). In contrast, no reliable objective word frequency effects were observed on naming speed, with AoA controlled for, in either spoken (Experiment 3) or written (Experiment 4) picture naming. The implications of the findings for written picture naming are briefly discussed.

  2. Should general practitioners call patients by their first names?

    Science.gov (United States)

    McKinstry, B

    1990-10-06

    To assess the acceptability to patients of the use of patients' first names by doctors and doctors' first names by patients in general practice. An administered questionnaire survey. 5 General practices in Lothian. 475 Patients consulting 30 general practitioners. Response by patients to questionnaire on attitude to use of first names. Most of the patients either liked (223) or did not mind (175) being called by their first names. Only 77 disliked it, most of whom were aged over 65. Most patients (324) did not, however, want to call the doctor by his or her first name. General practitioners should consider using patients' first names more often, particularly with younger patients.

  3. Thermal effects in highly dispersed iron catalysts

    International Nuclear Information System (INIS)

    Alvarez, A.M.; Cagnoli, M.V.; Gallegos, N.G.; Marchetti, S.G.; Yeramian, A.A.; Mercader, R.C.

    1994-01-01

    The Moessbauer spectra of three Fe/SiO 2 catalysts with 5 wt% iron content show the presence of several Fe species and display different magnetic behaviours when the precursors are subjected to various thermal treatments. Based on the Moessbauer parameters and CO chemisorption measurements, the average crystal sizes of the catalysts are estimated and discussed in connection with the thermal pretreatment severity and magnetic properties of the samples. (orig.)

  4. Dehydration of alcohols using solid acid catalysts

    OpenAIRE

    Cholerton, Mary

    2014-01-01

    Solid acid catalysts were prepared through silicon substitution into aluminophosphate frameworks. Silicon incorporation was confirmed using solid state nuclear magnetic resonance spectroscopy. The nature of the acid sites generated was determined using Fourier Transform infrared spectroscopy. These materials were tested as catalysts for the dehydration of ethanol to ethylene at low operating temperatures. The materials were active for dehydration of ethanol to ethylene with significant differ...

  5. Advances in propane ammoxidation catalyst technology

    Energy Technology Data Exchange (ETDEWEB)

    Prada Silvy, R.; Grange, P. [Unite de Catalyse et Chimie des Materiaux Divises, Univ. Cathologique de Louvain, Louvain-la-Neuve (Belgium)

    2003-09-01

    Comparison of the catalytic performance of different propane ammoxidation catalyst systems from the patent literature is established in order to identify the most promising formulation towards process commercialization scale. Vanadium aluminum oxynitride material shows the highest acrylonitrile production level per hour and per amount of catalyst with respect to conventional vanadium-molybdate and vanadium- antimonate mixed oxide propane ammoxidation systems. Acrylonitrile, hydrogen cyanide and acetonitrile production from propane ammoxidation is the key factor for obtaining competitive advantages over current propylene technology. (orig.)

  6. Performance of supported catalysts for water electrolysis

    OpenAIRE

    Gurrik, Stian

    2012-01-01

    The most active catalyst for oxygen evolution in PEM water electrolysis is ruthenium oxide. Its major drawback as a commercial catalyst is its poor stability. In a mixed oxide with iridium, ruthenium becomes more stable. However, it would be favorable to find a less expensive substitute to iridium. In this work, the dissolution potential and lifetime of mixed oxides containing ruthenium and tantalum are investigated. In order to effectively determine what effects tantalum and particle size ha...

  7. Sulfur deactivation of fatty ester hydrogenolysis catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Brands, D.S.; U-A-Sai, G.; Poels, E.K.; Bliek, A. [Univ. of Amsterdam (Netherlands). Dept. of Chemical Engineering

    1999-08-15

    Trace organosulfur compounds present as natural impurities in oleochemical feedstocks may lead to activation of copper-containing catalysts applied for hydrogenolysis of esters toward fatty alcohols. In this paper, the sulfur deactivation of Cu/SiO{sub 2} and Cu/ZnO/SiO{sub 2} catalysts was studied in the liquid-phase hydrogenolysis of methyl palmitate. The rate of deactivation is fast and increases as a function of the sulfur-containing compound present: octadecanethiol {approx} dihexadecyl disulfide < benzyl isothiocyanate < methyl p-toluene sulfonate < dihexadecyl sulfide < dibenzothiophene. The rapid deactivation is caused by the fact that sulfur is quantitatively removed from the reaction mixture and because mainly surface sulfides are formed under hydrogenolysis conditions. The life time of a zinc-promoted catalyst is up to two times higher than that of the Cu/SiO{sub 2} catalyst, most likely due to zinc surface sulfide formation. The maximum sulfur coverage obtained after full catalyst deactivation with dibenzothiophene and dihexadecyl sulfide--the sulfur compounds that cause the fastest deactivation--may be as low as 0.07. This is due to the fact that decomposition of these compounds as well as the hydrogenolysis reaction itself proceeds on ensembles of copper atoms. Catalyst regeneration studies reveal that activity cannot be regained by reduction or combined oxidation/reduction treatments. XRD, TPR, and TPO results confirm that no distinct bulk copper or zinc sulfide or sulfate phases are present.

  8. Design of Embedded Metal Catalysts via Reverser Micro-Emulsion System: a Way to Suppress Catalyst Deactivation by Metal Sintering

    KAUST Repository

    AlMana, Noor

    2016-06-19

    The development of highly selective and active, long-lasting, robust, low-cost and environmentally benign catalytic materials is the greatest challenge in the area of catalysis study. In this context, core-shell structures where the active sites are embedded inside the protecting shell have attracted a lot of researchers working in the field of catalysis owing to their enhanced physical and chemical properties suppress catalyst deactivation. Also, a new active site generated at the interface between the core and shell may increases the activity and efficiency of the catalyst in catalytic reactions especially for oxide shells that exhibit redox properties such as TiO2 and CeO2. Moreover, coating oxide layer over metal nanoparticles (NPs) can be designed to provide porosity (micropore/mesopore) that gives selectivity of the various reactants by the different gas diffusion rates. In this thesis, we will discuss the concept of catalyst stabilization against metal sintering by a core-shell system. In particular we will study the mechanistic of forming core-shell particles and the key parameters that can influence the properties and morphology of the Pt metal particle core and SiO2 shell (Pt@SiO2) using the reverse micro-emulsion method. The Pt@SiO2 core-shell catalysts were investigated for low-temperature CO oxidation reaction. The study was further extended to other catalytic applications by varying the composition of the core as well as the chemical nature of the shell material. The Pt NPs were embedded within another oxide matrix such as ZrO2 and TiO2 for CO oxidation reaction. These materials were studied in details to identify the factors governing the coating of the oxide around the metal NPs. Next, a more challenging system, namely, bimetallic Ni9Pt NPs embedded in TiO2 and ZrO2 matrix were investigated for dry reforming of methane reaction at high temperatures. The challenges of designing Ni9Pt@oxide core-shell structure with TiO2 and ZrO2 and their tolerance

  9. Philip Morris changes its name, but not its harmful practices.

    Science.gov (United States)

    Myers, M L

    2002-09-01

    After spending more than $250 million on an advertising campaign to improve its name and reputation, Philip Morris has abruptly shifted course and decided instead to change its corporate name-to The Altria Group, Inc.

  10. A Semantic and Pragmatic Analyses of Igbo Names

    African Journals Online (AJOL)

    Key words: personal names, Igbo, semantic content, pragmatic content, structure. Background to the Study ... Igbo name is a story, a book or a dictionary itself. ..... the meaning (literal meaning) of some of the data structurally presented above.

  11. Name Authority Challenges for Indexing and Abstracting Databases

    OpenAIRE

    Denise Beaubien Bennett; Priscilla Williams

    2006-01-01

    Objective - This analysis explores alternative methods for managing author name changes in Indexing and Abstarcting (I&A) databases. A searcher may retrieve incomplete or inaccurate results when the database provides no or faulty assistance in linking author name variations. Methods - The article includes an analysis of current name authority practices in I&A databases and of selected research into name disambiguation models applied to authorship of articles. Results - Several potential...

  12. Task choice and semantic interference in picture naming

    OpenAIRE

    Piai, V.; Roelofs, A.P.A.; Schriefers, H.J.

    2015-01-01

    Evidence from dual-task performance indicates that speakers prefer not to select simultaneous responses in picture naming and another unrelated task, suggesting a response selection bottleneck in naming. In particular, when participants respond to tones with a manual response and name pictures with superimposed semantically related or unrelated distractor words, semantic interference in naming tends to be constant across stimulus onset asynchronies (SOAs) between the tone stimulus and the pic...

  13. 27 CFR 41.221 - Change in trade name.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Change in trade name. 41.221 Section 41.221 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU... Change in trade name. Where there is a change in, or an addition or discontinuance of, a trade name used...

  14. 27 CFR 44.102 - Change in trade name.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Change in trade name. 44.102 Section 44.102 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU... Warehouse Proprietors Changes in Name § 44.102 Change in trade name. Where there is a change in, or an...

  15. 27 CFR 478.53 - Change in trade name.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Change in trade name. 478....53 Change in trade name. A licensee continuing to conduct business at the location shown on his license is not required to obtain a new license by reason of a mere change in trade name under which he...

  16. 27 CFR 40.92 - Change in trade name.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Change in trade name. 40.92 Section 40.92 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU... Changes in Name § 40.92 Change in trade name. Where there is a change in, or an addition or discontinuance...

  17. 27 CFR 555.56 - Change in trade name.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Change in trade name. 555... trade name. A licensee or permittee continuing to conduct business or operations at the location shown... in trade name under which he conducts his business or operations. However, the licensee or permittee...

  18. Referential processing: reciprocity and correlates of naming and imaging.

    Science.gov (United States)

    Paivio, A; Clark, J M; Digdon, N; Bons, T

    1989-03-01

    To shed light on the referential processes that underlie mental translation between representations of objects and words, we studied the reciprocity and determinants of naming and imaging reaction times (RT). Ninety-six subjects pressed a key when they had covertly named 248 pictures or imaged to their names. Mean naming and imagery RTs for each item were correlated with one another, and with properties of names, images, and their interconnections suggested by prior research and dual coding theory. Imagery RTs correlated .56 (df = 246) with manual naming RTs and .58 with voicekey naming RTs from prior studies. A factor analysis of the RTs and of 31 item characteristics revealed 7 dimensions. Imagery and naming RTs loaded on a common referential factor that included variables related to both directions of processing (e.g., missing names and missing images). Naming RTs also loaded on a nonverbal-to-verbal factor that included such variables as number of different names, whereas imagery RTs loaded on a verbal-to-nonverbal factor that included such variables as rated consistency of imagery. The other factors were verbal familiarity, verbal complexity, nonverbal familiarity, and nonverbal complexity. The findings confirm the reciprocity of imaging and naming, and their relation to constructs associated with distinct phases of referential processing.

  19. Sociolinguistic import of name-clipping among Omambala cultural ...

    African Journals Online (AJOL)

    This study examines the perceived but obvious manifestation of name-clipping among Omambala cultural zone of Anambra State. This situation has given rise to distortion of names and most often, to either mis-interpretation or complete loss of the original and full meanings of the names. This situation of misinterpretation is ...

  20. 48 CFR 452.211-70 - Brand Name or Equal.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Brand Name or Equal. 452... FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Texts of Provisions and Clauses 452.211-70 Brand Name or Equal. As prescribed in 411.171, insert the following provision: Brand Name or Equal (NOV 1996...

  1. 48 CFR 852.211-73 - Brand name or equal.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Brand name or equal. 852... Brand name or equal. As prescribed in 811.104-71, insert the following clause: Brand Name or Equal (JAN 2008) (Note: As used in this clause, the term “brand name” includes identification of products by make...

  2. 48 CFR 411.170 - Brand name or equal.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Brand name or equal. 411... ACQUISITION PLANNING DESCRIBING AGENCY NEEDS Selecting and Developing Requirements Documents 411.170 Brand name or equal. (a) A “brand name or equal” purchase description shall include the following type of...

  3. 77 FR 189 - Federal Acquisition Regulation; Brand-Name Specifications

    Science.gov (United States)

    2012-01-03

    ... 2006-0020, Sequence 26] RIN 9000-AK55 Federal Acquisition Regulation; Brand-Name Specifications... Management and Budget memoranda on brand-name specifications. DATES: Effective Date: February 2, 2012. FOR... brand- name specifications. Eight respondents submitted 32 comments in response to the interim rule. The...

  4. 48 CFR 1852.210-70 - Brand name or equal.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Brand name or equal. 1852... 1852.210-70 Brand name or equal. As prescribed in 1810.011-70(a), insert the following provision: Brand Name or Equal (DEC 1988) (a) As used in this provision, “brand name” means identification of products...

  5. 27 CFR 19.922 - Change in name of proprietor.

    Science.gov (United States)

    2010-04-01

    ... Changes Affecting Applications and Permits § 19.922 Change in name of proprietor. Where there is to be a change in the individual, firm, or corporate name, the proprietor shall, within 30 days of the change... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Change in name of...

  6. 27 CFR 18.32 - Change in name.

    Science.gov (United States)

    2010-04-01

    ... Original Establishment § 18.32 Change in name. The proprietor shall submit an amended application to cover any change in the individual, firm, or corporate name. (Approved by the Office of Management and... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Change in name. 18.32...

  7. 27 CFR 19.182 - Change in name of proprietor.

    Science.gov (United States)

    2010-04-01

    ... Plants Changes After Original Qualification § 19.182 Change in name of proprietor. Where there is to be a change in the individual, firm, or corporate name, the proprietor shall file application to amend the... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Change in name of...

  8. 27 CFR 40.395 - Change in name.

    Science.gov (United States)

    2010-04-01

    ... § 40.395 Change in name. Where there is a change in the individual, trade, or corporate name of a manufacturer of cigarette papers and tubes, the manufacturer shall, within 30 days of the change, furnish the... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Change in name. 40.395...

  9. Correlates of Gay-Related Name-Calling in Schools

    Science.gov (United States)

    Slaatten, Hilde; Hetland, Jørn; Anderssen, Norman

    2015-01-01

    The aim of this study was to examine whether attitudes about gay-related name-calling, social norms concerning gay-related name-calling among co-students, teacher intervention, and school-related support would predict whether secondary school pupils had called another pupil a gay-related name during the last month. A total of 921 ninth-grade…

  10. Acts of naming: The detective plot in Masondo's fiction | Mhlambi ...

    African Journals Online (AJOL)

    Masondo's acts of naming as a literary device are peculiar and unconventional. Similar names for characters migrate across all his detective narratives, representing varying personalities, psychologies and emotional states. He achieves this by using familiar names, not to create stereotypes and archetypes, but to ...

  11. Task choice and semantic interference in picture naming

    NARCIS (Netherlands)

    Piai, V.; Roelofs, A.P.A.; Schriefers, H.J.

    2015-01-01

    Evidence from dual-task performance indicates that speakers prefer not to select simultaneous responses in picture naming and another unrelated task, suggesting a response selection bottleneck in naming. In particular, when participants respond to tones with a manual response and name pictures with

  12. Design of Brand Names of Medicines Considering Subjects' Preferences.

    Science.gov (United States)

    Pires, Carla Maria Batista Ferreira; Cavaco, Afonso

    2018-03-01

    Only recently, regulations on the names of medicines were developed. Regulations are mainly focused on avoiding the approval of medicine names that may be confusing to others. Furthermore, legal requirements do not include testing for human factors, such as potential users' preferences. To develop a set of new brand names of medicines, to determine subjects' preferred names, and to evaluate if the linguistic features of these names were related to subjects' preferences. Forty-six new names linguistically equivalent to the Portuguese brand names of medicines were developed. A panel of 13 postgraduates on linguistic studies were purposively enrolled. Participants were required to select and categorize the 6 most preferred names. From the 29 selected names: 62.1% ended in consonants, 65.5% contained at least one syllable of the CVC type, and 62.1% presented final stress. Considering these 3 linguistic features, there were statistically significant differences between the preferred and underpreferred names: χ 2 = 4.572, P = .032; χ 2 = 5.599, P = .018; and χ 2 = 4.572; P = .032, respectively. Some linguistic features of the evaluated names were related to subjects' preferences. Tests on subjects' preferences about the names of medicines may provide additional safety features addressed by the present regulations.

  13. How Does Using Object Names Influence Visual Recognition Memory?

    Science.gov (United States)

    Richler, Jennifer J.; Palmeri, Thomas J.; Gauthier, Isabel

    2013-01-01

    Two recent lines of research suggest that explicitly naming objects at study influences subsequent memory for those objects at test. Lupyan (2008) suggested that naming "impairs" memory by a representational shift of stored representations of named objects toward the prototype (labeling effect). MacLeod, Gopie, Hourihan, Neary, and Ozubko (2010)…

  14. 27 CFR 4.35 - Name and address.

    Science.gov (United States)

    2010-04-01

    ... named winery: (A) Fermented not less than 75% of such wine at the stated address, or (B) Changed the.... (iv) Blended means that the named winery mixed the wine with other wines of the same class and type at the stated address. (v) Cellared, Vinted or Prepared means that the named winery, at the stated...

  15. Inventing and naming America:  Place and Place Names in Vladimir Nabokov’s Lolita

    Directory of Open Access Journals (Sweden)

    Monica Manolescu-Oancea

    2009-06-01

    Full Text Available In the afterword to Lolita, Nabokov claimed that in this book he had to invent both Lolita and America after having invented Europe in his previous fiction. This paper focuses precisely on the various ways in which Nabokov “invented” America in his best-known novel. This invention is first of all the result of the author’s evolving stance on the complexity of what he called “average ‘reality’” in his works. Through a survey of Nabokov’s statements on the choice and role of place in the forewords to his Russian works and in his critical texts, I show that Lolita is indeed considered by Nabokov to be a “recreation” of American reality, to a much greater extent than his Russian works had been recreations of a given milieu. I take the metaphor of the “crazy quilt” mentioned in Lolita to suggest complexity, chromatic exuberance, hybridity. The invention of America is also the result of a process of naming. Place names will be examined, not only those which make up Quilty’s “cryptogrammic paperchase”, but also Humbert’s choice of place names. The problem of referentiality is discussed and the way recent criticism has dealt with it. Finally, the interplay between one and many is emphasized, the way in which the diversity of the “crazy quilt” is counterbalanced by the uniqueness of the mastermind having produced it. The American motto “From many make one” could be reinterpreted as “From one make many”.

  16. Indexing concepts and/or named entities Indicizzare concetti e/o named entities

    Directory of Open Access Journals (Sweden)

    Pino Buizza

    2011-12-01

    Full Text Available

    A partire da un punto di vista semantico più che morfologico, l'articolo è focalizzato il problema del significato dei nomi propri, con contributi della filosofia del linguaggio e della linguistica semantica. Sono indagate le entità individuali: il loro isolamento all’interno della rete di soggetti e la relazione esemplificativa, il trattamento nelle classificazioni. Le profonde diversità rilevate fra concetti e entità denominate suggeriscono di dichiararle esplicitamente da un punto di vista teorico e di adottare dispositivi che diano risultati unitari ma chiaramente distinguibili nei sistemi di recupero dell’informazione.  
    Questo contributo è stato presentato col titolo Indexing concepts and/or named entities all'11th ISKO Conference, Paradigms and conceptual systems in knowledge organization, Roma, 23-26 febbraio 2010, non pubblicato negli atti, e qui leggermente ampliato.

    Starting from a semantic rather than form a morphological point of view, the essay examines the problem of the meaning of proper names, with contributions coming from the philosophy of language and the semantic linguistics. Individual entities are explored: the way they are isolated in the thread of subjects, the illustrative relation, and the classification treatment. The deep differences between concepts and called entities suggest to declare them specifically in a theoretical way, and to adopt devices that lead to uniform but noticeable results in information retrieval systems.
    This article has been discussed as "Indexing concepts and/or named entities" to the 11th ISKO Conference, Paradigms and conceptual systems in knowledge organization, Rome, 23-26 February 2010, here extended since it is not published in the conference proceedings.

  17. A Man with No Name, or Too Many Names if You Think About it

    OpenAIRE

    Singh, Danvir

    2014-01-01

    Danvir. Jimmy. Danny V. Danny V & the Bumblebees. Danny Valentine. Double D. Deezus. D Weezy. DJ Takeover. Or ahh forget it. From lowly beginnings as a Window cleaner in Tin Pan Alley-era New York City singing "hello hello Tokio" to an "inn-keeper" in the countryside waxing rhapsodically about his famous battles while those around him push his buttons, this man with numerous names has had the opportunity to experience multiple worlds and the challenges that each of these bring up for the acto...

  18. New antipollution processing of a used refining catalyst and complete recovery of the catalyst metallic components

    Energy Technology Data Exchange (ETDEWEB)

    Trinh Dinh Chan; Llido, E.

    1992-05-15

    The used refining catalyst, containing metals such as vanadium, nickel and iron, is first processed by stripping; it is then calcined in critical conditions and heat processed in the presence of a melted alkaline base; the resulting solid matter is then water processed. The antipollution process can be applied to oil fraction hydroconversion or hydroprocessing catalysts.

  19. FCC catalyst technologies expand limits of process capability

    International Nuclear Information System (INIS)

    Leiby, S.

    1992-01-01

    This paper reports that over the past 30 or so years, many improvements in fluid catalytic cracking (FCC) operation have been achieved as the result of innovations in catalyst formulation. During the 1990s, new environmental regulations on issues such as reformulated gasoline will place new demands on both the refining industry and catalyst suppliers. An overview of cracking catalyst technology therefore seems in order. Today, high-technology innovations by catalyst manufacturers are rapid, but profit margins are slim. Catalyst formulations are shrouded in secrecy and probably depend almost as much on art as on science. Special formulations for specific cracking applications get the greatest emphasis today. To illustrate this point, OGJ's Worldwide Catalyst Report lists over 200 FCC catalyst designations. Catalysts containing components to enhance gasoline octane now account for about 70% of total U.S. FCC catalyst usage

  20. Catalytic Transformation of Ethylbenzene over Y-Zeolite-based Catalysts

    KAUST Repository

    Al-Khattaf, Sulaiman

    2008-11-19

    Catalytic transformation of ethylbenzene (EB) has been investigated over ultrastable Y (USY)-zeolite-based catalysts in a novel riser simulator at different operating conditions. The effect of reaction conditions on EB conversion is reported. The USY catalyst (FCC-Y) was modified by steaming to form a significantly lower acidity catalyst (FCC-SY). The current study shows that the FCC-SY catalyst favors EB disproportionation more than cracking. A comparison has been made between the results of EB conversion over the lowly acidic catalyst (FCC-SY) and the highly acidic catalyst (FCC-Y) under identical conditions. It was observed that increase in catalyst acidity favored cracking of EB at the expense of disproportionation. Kinetic parameters for EB disappearance during disproportionation reaction over the FCC-SY catalyst were calculated using the catalyst activity decay function based on time on stream (TOS). © 2008 American Chemical Society.

  1. Zircon Supported Copper Catalysts for the Steam Reforming of Methanol

    Science.gov (United States)

    Widiastri, M.; Fendy, Marsih, I. N.

    2008-03-01

    Steam reforming of methanol (SRM) is known as one of the most favorable catalytic processes for producing hydrogen. Current research on zirconia, ZrO2 supported copper catalyst revealed that CuO/ZrO2 as an active catalyst for the SRM. Zircon, ZrSiO4 is available from the by-product of tin mining. In the work presented here, the catalytic properties of CuO/ZrSiO4 with various copper oxide compositions ranging from 2.70% (catalyst I), 4.12% (catalyst II), and 7.12%-mass (catalyst III), synthesized by an incipient wetness impregnation technique, were investigated to methanol conversion, selectivity towards CO formation, and effect of ZnO addition (7.83%CuO/8.01%ZnO/ZrSiO4 = catalyst V). The catalytic activity was obtained using a fixed bed reactor and the zircon supported catalyst activity was compared to those of CuO/ZnO/Al2O3 catalyst (catalyst IV) and commercial Kujang LTSC catalyst. An X-ray powder diffraction (XRD) analysis was done to identify the abundant phases of the catalysts. The catalysts topography and particle diameter were measured with scanning electron microscopy (SEM) and composition of the catalysts was measured by SEM-EDX, scanning electron microscope-energy dispersive using X-ray analysis. The results of this research provide information on the possibility of using zircon (ZrSiO4) as solid support for SRM catalysts.

  2. The challenges of treating high strength wastewaters: CWAO using MWNT supported ruthenium catalysts

    International Nuclear Information System (INIS)

    GarcIa, J.; Gomes, H.T.; Figueiredo, J.L.; Faria, J.L.; Garcia, J.; Serp, P.; Kalck, P.

    2005-01-01

    High strength wastewaters containing aromatic compounds are normally not efficiently treated by conventional methods, including the common biological treatment. In these cases a more sophisticated approach is necessary to attain the desired levels of purification. Catalytic wet air oxidation (CWAO) using carbon based catalysts is employed worldwide as effective pre-treatment of effluents with these characteristics. Carbon materials are preferred as active catalysts or support for preparing them due to their morphological and structural characteristics. In the last 10 years, due to a tremendous development in materials production and processing, carbon nano-structures are becoming more accessible and common widening their range of applications [1]. In this context, the scope of the present work is to illustrate a potential use of multi-walled carbon nano-tubes (MWNT) supported ruthenium catalysts for catalytic wet air oxidation of aniline polluted wastewaters. The metal was supported by incipient wetness and excess impregnation, starting from liquid solutions of three different Ru precursors. Impregnation was carried out on modified MWNT, namely on MWNT-COOH (HNO 3 modified) and MWNT-COONa (HNO 3 /Na 2 CO 3 modified). For the 1% weight Ru/MWNT catalysts, the order of activities decreased in the sequence Ru(COD)(COT)≥RuCl 3 ≥Ru(C 5 H 5 ) 2 . The conversion of aniline after 45 min of reaction was 100% for the catalyst prepared with Ru(COD)(COT). The influence of the Ru precursor, preparation method and the support surface modification was studied comparing the conversion of aniline obtained for the different prepared Ru/MWNT catalysts (Figure 1). MWNT as support material, provide a significant metal dispersion with very small Ru nanoparticles (Figure 2) being observed. This will induce an efficient surface contact between the aniline molecule and the active sites [2]. The excellent catalytic performances of Ru/MWNT are explained in terms of the high dispersion of

  3. The challenges of treating high strength wastewaters: CWAO using MWNT supported ruthenium catalysts

    Energy Technology Data Exchange (ETDEWEB)

    GarcIa, J.; Gomes, H.T.; Figueiredo, J.L.; Faria, J.L. [Porto Univ., Lab. de Catalise e Materiais, Dept. de Engenharia Quimica, Faculdade de Engenharia (Portugal); Garcia, J. [Madrid Univ. Complutense, Grupo de Catalisis y Operaciones de Separacion, Dept. de Ingenieria Quimica, Facultad de Ciencias (Spain); Serp, P.; Kalck, P. [Ecole Nationale Superieure des Ingenieurs en Arts Chimiques et Technologiques, Lab. de Catalyse, Chimie Fine et Polymeres, 31 - Toulouse (France)

    2005-07-01

    High strength wastewaters containing aromatic compounds are normally not efficiently treated by conventional methods, including the common biological treatment. In these cases a more sophisticated approach is necessary to attain the desired levels of purification. Catalytic wet air oxidation (CWAO) using carbon based catalysts is employed worldwide as effective pre-treatment of effluents with these characteristics. Carbon materials are preferred as active catalysts or support for preparing them due to their morphological and structural characteristics. In the last 10 years, due to a tremendous development in materials production and processing, carbon nano-structures are becoming more accessible and common widening their range of applications [1]. In this context, the scope of the present work is to illustrate a potential use of multi-walled carbon nano-tubes (MWNT) supported ruthenium catalysts for catalytic wet air oxidation of aniline polluted wastewaters. The metal was supported by incipient wetness and excess impregnation, starting from liquid solutions of three different Ru precursors. Impregnation was carried out on modified MWNT, namely on MWNT-COOH (HNO{sub 3} modified) and MWNT-COONa (HNO{sub 3}/Na{sub 2}CO{sub 3} modified). For the 1% weight Ru/MWNT catalysts, the order of activities decreased in the sequence Ru(COD)(COT){>=}RuCl{sub 3}{>=}Ru(C{sub 5}H{sub 5}){sub 2}. The conversion of aniline after 45 min of reaction was 100% for the catalyst prepared with Ru(COD)(COT). The influence of the Ru precursor, preparation method and the support surface modification was studied comparing the conversion of aniline obtained for the different prepared Ru/MWNT catalysts (Figure 1). MWNT as support material, provide a significant metal dispersion with very small Ru nanoparticles (Figure 2) being observed. This will induce an efficient surface contact between the aniline molecule and the active sites [2]. The excellent catalytic performances of Ru/MWNT are explained

  4. Methanol conversion to hydrocarbons using modified clinoptilolite catalysts. Investigation of catalyst lifetime and reactivation

    Energy Technology Data Exchange (ETDEWEB)

    Hutchings, G J; Themistocleous, T; Copperthwaite, R G

    1988-10-17

    A study of the deactivation and reactivation of modified clinoptilolite catalysts for methanol conversion to hydrocarbons is reported. Clinoptilolite catalysts, modified by either ammonium ion exchange or hydrochloric acid treatment, exhibit a short useful catalyst lifetime for this reaction (ca. 2-3 h) due to a high rate of coke deposition (3-5.10/sup -3/ g carbon/g catalyst/h). A comparative study of reactivation using oxygen, nitrous oxide and ozone/oxygen as oxidants indicated that nitrous oxide reactivation gives improved catalytic performance when compared to the activity and lifetime of the fresh catalyst. Both oxygen and ozone/oxygen were found to be ineffective for the reactivation of clinoptilolite. Initial studies of in situ on-line reactivation are also described. 3 figs., 15 refs., 4 tabs.

  5. Optimal catalyst curves: Connecting density functional theory calculations with industrial reactor design and catalyst selection

    DEFF Research Database (Denmark)

    Jacobsen, C.J.H.; Dahl, Søren; Boisen, A.

    2002-01-01

    For ammonia synthesis catalysts a volcano-type relationship has been found experimentally. We demonstrate that by combining density functional theory calculations with a microkinetic model the position of the maximum of the volcano curve is sensitive to the reaction conditions. The catalytic...... ammonia synthesis activity, to a first approximation, is a function only of the binding energy of nitrogen to the catalyst. Therefore, it is possible to evaluate which nitrogen binding energy is optimal under given reaction conditions. This leads to the concept of optimal catalyst curves, which illustrate...... the nitrogen binding energies of the optimal catalysts at different temperatures, pressures, and synthesis gas compositions. Using this concept together with the ability to prepare catalysts with desired binding energies it is possible to optimize the ammonia process. In this way a link between first...

  6. Name Stanislaus (Stanisław in Slavic Onomastic Tradition

    Directory of Open Access Journals (Sweden)

    Franciszek Sowa

    2003-12-01

    Full Text Available St. Stanislaus, bishop and martyr, is one of the few saints of the Church bearing a traditional Slavic name. It belongs to an Indo-European Anthroponomastic system as a compound name whose components represent a pattern inherited from the period of the Indo-European community. This is a fortune-telling name (a nomen-omen given to a child on a wish of the parents, who wanted him to be famous (Polish ‘slawa’ means ‘fame’- Today, in our Christian culture, in choosing a name for the child we consider the following: 1 the child ‘brought’ his/her name (i.e. is given the name of the day’s patron; this is the gist of our ‘nameday’, 2 a family tradition, 3 respect for the grandfather or father (grandmother, mother, 4 fashion. Today’s anthroponomastic system in Slavic languages (except Bulgarian has grown cold leaving us unable to acquire precise understanding of the meaning of the name. Besides, nowadays names only denote, they do not mean anything. Compound Slavic names refer in their structure to names from other groups of the Indo-European community and are closely linked with a nation’s spiritual culture and appropriate ultimate and instrumental values. In Indo-European languages a different number of lexical components is used in names as their first or second part: in Old Indian - 865; in Old Persian and Median - 43; in Greek - 1015; in the Celtic group - 336; the German one - 1800 and in the Slavic group - 220. The most numerous in Old Polish anthroponomastics were names with the component slaw. As the first component - slaw appears in 4 names, and as the second, in 100. This component has appeared from times immemorial in Indian, Avestan, Greek and Illyrian names. Name Stanislaus is known in all Slavic countries, while its feminine form only in Polish, Bulgarian, Serb and Croatian. In Poland it has been in use since very old times up to now. Numerous surnames and names of places derive from it. The popularity of the name

  7. Electrically conductive aluminum oxide thin film used as cobalt catalyst-support layer in vertically aligned carbon nanotube growth

    International Nuclear Information System (INIS)

    Azam, Mohd Asyadi; Ismail, Syahriza; Mohamad, Noraiham; Isomura, Kazuki; Shimoda, Tatsuya

    2015-01-01

    This paper will present the unique characteristics of aluminum oxide (Al–O) and cobalt catalyst included in aligned carbon nanotube (CNT) electrode system of energy storage device, namely electrochemical capacitor. Electrical conductivity and nanostructure of the thermally oxidized Al–O used as catalyst-support layer in vertically grown single-walled CNTs were studied. Al–O films were characterized by means of current–voltage measurement and high resolution transmission electron microscopy analysis. The Al–O support layer was found to be conductive, with a relatively low resistance and, approximately 20 nm film thickness of Al–O is suggested to be too thin to form insulating barrier. The scanning TEM—annular dark field analysis confirmed that the nanosized cobalt catalyst particles distributed on Al–O surfaces and also embedded inside the Al–O film structure. (paper)

  8. Ruthenium–Platinum Catalysts and Direct Methanol Fuel Cells (DMFC: A Review of Theoretical and Experimental Breakthroughs

    Directory of Open Access Journals (Sweden)

    Ana S. Moura

    2017-02-01

    Full Text Available The increasing miniaturization of devices creates the need for adequate power sources and direct methanol fuel cells (DMFC are a strong option in the various possibilities under current development. DMFC catalysts are mostly based on platinum, for its outperformance in three key areas (activity, selectivity and stability within methanol oxidation framework. However, platinum poisoning with products of methanol oxidation led to the use of alloys. Ruthenium–platinum alloys are preferred catalysts active phases for methanol oxidation from an industrial point of view and, indeed, ruthenium itself is a viable catalyst for this reaction. In addition, the route of methanol decomposition is crucial in the goal of producing H2 from water reaction with methanol. However, the reaction pathway remains elusive and new approaches, namely in computational methods, have been ensued to determine it. This article reviews the various recent theoretical approaches for determining the pathway of methanol decomposition, and systematizes their validation with experimental data, within methodological context.

  9. Naming as Strategic Communication: Understanding Corporate Name Change through an Integrative Framework Encompassing Branding, Identity and Institutional Theory

    DEFF Research Database (Denmark)

    Schmeltz, Line; Kjeldsen, Anna Karina

    2016-01-01

    This article presents a framework for understanding corporate name change as strategic communication. From a corporate branding perspective, the choice of a new name can be seen as a wish to stand out from a group of similar organizations. Conversely, from an institutional perspective, name change...

  10. Robust hybrid name disambiguation framework for large databases

    KAUST Repository

    Zhu, Jia

    2013-10-26

    In many databases, science bibliography database for example, name attribute is the most commonly chosen identifier to identify entities. However, names are often ambiguous and not always unique which cause problems in many fields. Name disambiguation is a non-trivial task in data management that aims to properly distinguish different entities which share the same name, particularly for large databases like digital libraries, as only limited information can be used to identify authors\\' name. In digital libraries, ambiguous author names occur due to the existence of multiple authors with the same name or different name variations for the same person. Also known as name disambiguation, most of the previous works to solve this issue often employ hierarchical clustering approaches based on information inside the citation records, e.g. co-authors and publication titles. In this paper, we focus on proposing a robust hybrid name disambiguation framework that is not only applicable for digital libraries but also can be easily extended to other application based on different data sources. We propose a web pages genre identification component to identify the genre of a web page, e.g. whether the page is a personal homepage. In addition, we propose a re-clustering model based on multidimensional scaling that can further improve the performance of name disambiguation. We evaluated our approach on known corpora, and the favorable experiment results indicated that our proposed framework is feasible. © 2013 Akadémiai Kiadó, Budapest, Hungary.

  11. Humorous Names in the Light of Incongruity Theory

    Directory of Open Access Journals (Sweden)

    Mariusz Rutkowski

    2016-07-01

    Full Text Available The article addresses the humorous function of proper names in the light of incongruity theory. It aims at proving that, although names are often defined as pragmatically “transparent,” they may possess some humorous value due to semantic and pragmatic shifts resulting from the disturbance of ordinary patterns of proper names identification and interpretation. After a brief introduction, the author discusses different variants of incongruity theory as resented in the works by Victor Raskin and Thomas C. Veatch as well as their possible application to the study of humorous names. The second part of the paper provides an analysis of the humorous effects of proper names which includes anthroponyms, toponyms, trade names, football team names and names in literature. The first section of this part concentrates on names in which humour is unintentional and seems to be induced by the context, while the second section focuses on names which are intentionally humourous, i.e. supposed to amuse from the moment of their creation. The author argues that the incongruity theory can provide a useful framework for the study of the different mechanisms responsible of the semantic shifts which determine the variation of pragmatic values of proper names.

  12. Robust hybrid name disambiguation framework for large databases

    KAUST Repository

    Zhu, Jia; Yang, Yi; Xie, Qing; Wang, Liwei; Hassan, Saeed-Ul

    2013-01-01

    In many databases, science bibliography database for example, name attribute is the most commonly chosen identifier to identify entities. However, names are often ambiguous and not always unique which cause problems in many fields. Name disambiguation is a non-trivial task in data management that aims to properly distinguish different entities which share the same name, particularly for large databases like digital libraries, as only limited information can be used to identify authors' name. In digital libraries, ambiguous author names occur due to the existence of multiple authors with the same name or different name variations for the same person. Also known as name disambiguation, most of the previous works to solve this issue often employ hierarchical clustering approaches based on information inside the citation records, e.g. co-authors and publication titles. In this paper, we focus on proposing a robust hybrid name disambiguation framework that is not only applicable for digital libraries but also can be easily extended to other application based on different data sources. We propose a web pages genre identification component to identify the genre of a web page, e.g. whether the page is a personal homepage. In addition, we propose a re-clustering model based on multidimensional scaling that can further improve the performance of name disambiguation. We evaluated our approach on known corpora, and the favorable experiment results indicated that our proposed framework is feasible. © 2013 Akadémiai Kiadó, Budapest, Hungary.

  13. Testing protects against proactive interference in face-name learning.

    Science.gov (United States)

    Weinstein, Yana; McDermott, Kathleen B; Szpunar, Karl K

    2011-06-01

    Learning face-name pairings at a social function becomes increasingly more difficult the more individuals one meets. This phenomenon is attributable to proactive interference--the negative influence of prior learning on subsequent learning. Recent evidence suggests that taking a memory test can alleviate proactive interference in verbal list learning paradigms. We apply this technique to face-name pair learning. Participants studied four lists of 12 face-name pairings and either attempted to name the 12 faces just studied after every list or did not. Recall attempts after every list improved learning of the fourth list by over 100%. Moreover, no reduction in learning of face-name pairings occurred from list 1 to list 4 for participants who attempted to name studied faces between lists. These results suggest that testing oneself on the names of a group of new acquaintances before moving on to the next group is an effective mnemonic technique for social functions.

  14. Synthesis H-Zeolite catalyst by impregnation KI/KIO3 and performance test catalyst for biodiesel production

    Science.gov (United States)

    Widayat, W.; Rizky Wicaksono, Adit; Hakim Firdaus, Lukman; Okvitarini, Ndaru

    2016-02-01

    The objective of this research is to produce H-catalyst catalyst that was impregnated with KI/KIO3. The catalyst was analyzed about surface area, X-Ray Diffraction (XRD) and performance test of catalyst for biodiesel production. An H-Zeolite catalyst was synthesized from natural zeolite with chemical treatment processing, impregnation KI/KIO3 and physical treatment. The results shows that the surface area of the catalyst by 27.236 m2/g at a concentration of 5% KI. XRD analysis shows peak 2-θ at 23.627o indicating that KI was impregnated on H-zeolite catalyst. The catalyst was tested in production of biodiesel using palm oil with conventional methods for 3 hour at temperature of 70-80 oC. The result for conversion Fatty Acid Methyl Ester (FAME) reached maximum value on 87.91% under production process using catalyst 5% KIO3-H zeolite.

  15. Steam dealkylation catalyst and a method for its activation

    International Nuclear Information System (INIS)

    Dorawala, T.; Reinhard, R.

    1980-01-01

    The method of activating a supported catalyst containing oxides of a group viii metal and of a group 1 a metal which comprises heating said catalyst at a rate of 10 0 to 500 0 F/hr to a temperature of 650 0 to 1400 0 F in a hydrogen atmosphere; maintaining said heated catalyst in a hydrogen atmosphere at 650 0 to 1400 0 F for 2 to 30 hours thereby forming a hydrogen-treated catalyst; and maintaining the hydrogen-treated catalyst in a steam-hydrogen atmosphere at 650 0 to 1400 0 F for 2 to 20 hours thereby forming a steamed hydrogen-treated catalyst

  16. Effects of navigated TMS on object and action naming

    Directory of Open Access Journals (Sweden)

    Julio Cesar Hernandez-Pavon

    2014-09-01

    Full Text Available Transcranial magnetic stimulation (TMS has been used to induce speech disturbances and to affect speech performance during different naming tasks. Lately, repetitive navigated TMS (nTMS has been used for non-invasive mapping of cortical speech-related areas. Different naming tasks may give different information that can be useful for presurgical evaluation. We studied the sensitivity of object and action naming tasks to nTMS and compared the distributions of cortical sites where nTMS produced naming errors. Eight healthy subjects named pictures of objects and actions during repetitive nTMS delivered to semi-random left-hemispheric sites. Subject-validated image stacks were obtained in the baseline naming of all pictures before nTMS. Thereafter, nTMS pulse trains were delivered while the subjects were naming the images of objects or actions. The sessions were video-recorded for offline analysis. Naming during nTMS was compared with the baseline performance. The nTMS-induced naming errors were categorized by error type and location. nTMS produced no-response errors, phonological paraphasias, and semantic paraphasias. In seven out of eight subjects, nTMS produced more errors during object than action naming. Both intrasubject and intersubject analysis showed that object naming was significantly more sensitive to nTMS. When the number of errors was compared according to a given area, nTMS to postcentral gyrus induced more errors during object than action naming. Object naming is apparently more easily disrupted by TMS than action naming. Different stimulus types can be useful for locating different aspects of speech functions. This provides new possibilities in both basic and clinical research of cortical speech representations.

  17. Thermal decomposition of supported lithium nitrate catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Ruiz, Maria Lucia [INTEQUI (CONICET-UNSL), 25 de Mayo 384, V. Mercedes, 5730, San Luis (Argentina); Lick, Ileana Daniela [CINDECA (CONICET-UNLP), Calle 47 No 257, La Plata, 1900, Buenos Aires (Argentina); Ponzi, Marta Isabel [INTEQUI (CONICET-UNSL), 25 de Mayo 384, V. Mercedes, 5730, San Luis (Argentina); Castellon, Enrique Rodriguez; Jimenez-Lopez, Antonio [Departamento de Quimica Inorganica, Cristalografia y Mineralogia. Facultad de Ciencias, Universidad de Malaga, Campus de Teatinos, 29071 Malaga (Spain); Ponzi, Esther Natalia, E-mail: eponzi@quimica.unlp.edu.ar [CINDECA (CONICET-UNLP), Calle 47 No 257, La Plata, 1900, Buenos Aires (Argentina)

    2010-02-20

    New catalysts for soot combustion were prepared by impregnation of different supports (SiO{sub 2}, ZrO{sub 2} and ZrO{sub 2}.nH{sub 2}O) with a LiNO{sub 3} solution and then characterized by means of FTIR, XPS, TGA and UV-vis spectroscopy, whereby the presence of lithium nitrate in the prepared catalysts was identified and quantified. The soot combustion rate using this series of catalysts (LiNO{sub 3}/support) was compared with the activity of a series of impregnated catalysts prepared using LiOH (Li{sub 2}O/supports). Catalysts prepared using LiNO{sub 3} are found to be more active than those prepared using LiOH. The catalytic performance was also studied with a NO/O{sub 2} mixture in the feed, demonstrating that NO increases the combustion rate of soot, probably as a consequence of lithium oxide forming an 'in situ' nitrate ion.

  18. Finding Furfural Hydrogenation Catalysts via Predictive Modelling.

    Science.gov (United States)

    Strassberger, Zea; Mooijman, Maurice; Ruijter, Eelco; Alberts, Albert H; Maldonado, Ana G; Orru, Romano V A; Rothenberg, Gadi

    2010-09-10

    We combine multicomponent reactions, catalytic performance studies and predictive modelling to find transfer hydrogenation catalysts. An initial set of 18 ruthenium-carbene complexes were synthesized and screened in the transfer hydrogenation of furfural to furfurol with isopropyl alcohol complexes gave varied yields, from 62% up to >99.9%, with no obvious structure/activity correlations. Control experiments proved that the carbene ligand remains coordinated to the ruthenium centre throughout the reaction. Deuterium-labelling studies showed a secondary isotope effect (k(H):k(D)=1.5). Further mechanistic studies showed that this transfer hydrogenation follows the so-called monohydride pathway. Using these data, we built a predictive model for 13 of the catalysts, based on 2D and 3D molecular descriptors. We tested and validated the model using the remaining five catalysts (cross-validation, R(2)=0.913). Then, with this model, the conversion and selectivity were predicted for four completely new ruthenium-carbene complexes. These four catalysts were then synthesized and tested. The results were within 3% of the model's predictions, demonstrating the validity and value of predictive modelling in catalyst optimization.

  19. New catalysts for exhaust gas cleaning

    Energy Technology Data Exchange (ETDEWEB)

    Haerkoenen, M [Kemira Metalkat Oy, Oulu (Finland)

    1997-12-31

    Major challenge for future catalyst systems was to develop thermally more stable washcoats for close coupled operating conditions and for engines operating under high speed and load conditions. To design these future emission systems extensive research and development was undertaken to develop methods to disperse and stabilize the key catalytic materials for operation at much higher temperatures. Second priority was to design catalysts that are more effective under low temperature exhaust conditions and have improved oxygen storage properties in the washcoats. Incorporating new materials and modified preparation technology a new generation of metallic catalyst formulations emerged, those being trimetallic K6 (Pt:Pd:Rh and bimetallic K7) (Pd+Pd:Rh). The target was to combine the best property of Pt:Rh (good NO{sub x} reduction) with that of the good HC oxidation activity of Pd and to ensure that precious metal/support interactions were positively maintained. Both K6 and K7 concepts contain special catalyst structures with optimized washcoat performance which can be brick converter configuration. Improvement in light-off, thermal stability and transient performance with these new catalyst formulations have clearly been shown in both laboratory and vehicle testing. (author) (20 refs.)

  20. Characterization of three-way automotive catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Kenik, E.A.; More, K.L. [Oak Ridge National Lab., TN (United States); LaBarge, W. [Delphi Automotive Systems, Flint, MI (United States)] [and others

    1997-04-01

    The CRADA between Delphi Automotive Systems (Delphi; formerly General Motors - AC Delco, Systems) and Lockheed Martin Energy Research (LMER) on automotive catalysts was completed at the end of FY96, after a ten month, no-cost extension. The CRADA was aimed at improved performance and lifetime of noble metal based three-way-catalysts (TWC), which are the primary catalytic system for automotive emission control systems. While these TWC can meet the currently required emission standards, higher than optimum noble metal loadings are often required to meet lifetime requirements. In addition, more stringent emission standards will be imposed in the near future, demanding improved performance and service life from these catalysts. Understanding the changes of TWC conversion efficiency with ageing is a critical need in improving these catalysts. Initially in a fresh catalyst, the active material is often distributed on a very fine scale, approaching single atoms or small atomic clusters. As such, a wide range of analytical techniques have been employed to provide high spatial resolution characterization of the evolving state of the catalytic material.

  1. Finding Furfural Hydrogenation Catalysts via Predictive Modelling

    Science.gov (United States)

    Strassberger, Zea; Mooijman, Maurice; Ruijter, Eelco; Alberts, Albert H; Maldonado, Ana G; Orru, Romano V A; Rothenberg, Gadi

    2010-01-01

    Abstract We combine multicomponent reactions, catalytic performance studies and predictive modelling to find transfer hydrogenation catalysts. An initial set of 18 ruthenium-carbene complexes were synthesized and screened in the transfer hydrogenation of furfural to furfurol with isopropyl alcohol complexes gave varied yields, from 62% up to >99.9%, with no obvious structure/activity correlations. Control experiments proved that the carbene ligand remains coordinated to the ruthenium centre throughout the reaction. Deuterium-labelling studies showed a secondary isotope effect (kH:kD=1.5). Further mechanistic studies showed that this transfer hydrogenation follows the so-called monohydride pathway. Using these data, we built a predictive model for 13 of the catalysts, based on 2D and 3D molecular descriptors. We tested and validated the model using the remaining five catalysts (cross-validation, R2=0.913). Then, with this model, the conversion and selectivity were predicted for four completely new ruthenium-carbene complexes. These four catalysts were then synthesized and tested. The results were within 3% of the model’s predictions, demonstrating the validity and value of predictive modelling in catalyst optimization. PMID:23193388

  2. New catalysts for exhaust gas cleaning

    Energy Technology Data Exchange (ETDEWEB)

    Haerkoenen, M. [Kemira Metalkat Oy, Oulu (Finland)

    1996-12-31

    Major challenge for future catalyst systems was to develop thermally more stable washcoats for close coupled operating conditions and for engines operating under high speed and load conditions. To design these future emission systems extensive research and development was undertaken to develop methods to disperse and stabilize the key catalytic materials for operation at much higher temperatures. Second priority was to design catalysts that are more effective under low temperature exhaust conditions and have improved oxygen storage properties in the washcoats. Incorporating new materials and modified preparation technology a new generation of metallic catalyst formulations emerged, those being trimetallic K6 (Pt:Pd:Rh and bimetallic K7) (Pd+Pd:Rh). The target was to combine the best property of Pt:Rh (good NO{sub x} reduction) with that of the good HC oxidation activity of Pd and to ensure that precious metal/support interactions were positively maintained. Both K6 and K7 concepts contain special catalyst structures with optimized washcoat performance which can be brick converter configuration. Improvement in light-off, thermal stability and transient performance with these new catalyst formulations have clearly been shown in both laboratory and vehicle testing. (author) (20 refs.)

  3. Study of ammonia synthesis using technetium catalysts

    International Nuclear Information System (INIS)

    Spitsyn, V.I.; Mikhajlenko, I.E.; Pokrovskaya, O.V.

    1982-01-01

    A study was made on catalytic properties of technetium in ammonia synthesis reaction. The preparation of technetium catalysts on ν-Al 2 O 3 , BaTiO 3 , BaO-ν-Al 2 O 3 substrates is described. The investigation of catalytic activity of catalysts was carried out at a pressure of 1 atm. in vertical reactor with volume rate of 15000 h - 1 in the temperature range of 350-425 deg. The amount of catalyst was 0.5-1 g, the volume- 0.5 ml, the size of granules- 2-3 mm. Rate constants of ammonia synthesis reaction were calculated. Seeming activation energies of the process have meanings wihtin the limits of 40-50 kcal/mol. It was shown that with increase in concentration of Tc on BaTiO 3 the catalytic activity rises in comparison with pure Tc. The reduction of catalytic activity with increase of metal content on Al 2 O 3 begins in the limits of 3.5-6.7% Tc/ν-Al 2 O 3 . The catalyst of 5.3% Tc/4.1% Ba/ν -Al 2 O 3 compound has the maximum activity. Technetium catalysts possess the stable catalytic activity and don't requre its reduction during several months

  4. Characterization and Catalytic Activity of Montmorillonite K10-Supported Cobalt Catalysts

    International Nuclear Information System (INIS)

    Gobara, H.M.; Ghattas, M.S.; Henien, S.A.

    2010-01-01

    Montmorillonite K10-supported cobalt catalysts were prepared by wet impregnation method. The samples were analyzed by XRD, TPR, FTTR and BET characterization techniques. [Three phases of cobalt species were identified namely, cobalt oxide (Co 3 O 4 ), cobalt silicate (Co 2 S 1 O 4 ) and cobalt aluminate (CoAl 2 O 4 ). These species were most probably existing within the inter lamellar spaces of the meso porous montmorillonite K10 support]. The two bands observed at 1385 and 760 cm 1 were characteristic of metal species rather than the support, being mostly of Co - O bond vibration. The hysteresis loop, pore size distribution, pore volume and BET surface area were greatly affected by cobalt loading. The catalyst containing 18 wt% cobalt was the most selective sample for ethylene production from ethanol dehydration.

  5. A Green Approach for Allylations of Aldehydes and Ketones: Combining Allylborate, Mechanochemistry and Lanthanide Catalyst

    Directory of Open Access Journals (Sweden)

    Viviane P. de Souza

    2016-11-01

    Full Text Available Secondary and tertiary alcohols synthesized via allylation of aldehydes and ketones are important compounds in bioactive natural products and industry, including pharmaceuticals. Development of a mechanochemical method using potassium allyltrifluoroborate salt and water, to successfully perform the allylation of aromatic and aliphatic carbonyl compounds is reported for the first time. By controlling the grinding parameters, the methodology can be selective, namely, very efficient for aldehydes and ineffective for ketones, but by employing lanthanide catalysts, the reactions with ketones can become practically quantitative. The catalyzed reactions can also be performed under mild aqueous stirring conditions. Considering the allylation agent and its by-products, aqueous media, energy efficiency and use of catalyst, the methodology meets most of the green chemistry principles.

  6. PENGATURAN PASSING OFF DALAM PENGGUNAAN DOMAIN NAME TERKAIT DENGAN MEREK

    Directory of Open Access Journals (Sweden)

    Herti Yunita Putri

    2016-09-01

    Full Text Available In cyber world we often hear about domain name’s term. Domain name is a unique name to identify the server computer’s name like a web server or email server on a computer network or Internet. Passing off also make causes confusion in using merk from a famous brand or merk on the goods and services. Selected domain name in the internet media often creates the similar domain name with the other parties. This similar domain name are often used by people who are not responsible to take advantages of the domain name for themself. This can be caused by the presence of competition from Internet media business. This things called passing off. This research is a normative juridical research with a qualitative analysis. The legal materials include primary legal, secondary law and tertiary legal materials. Collection technique applied is literary study. Legal materials were analyzed to see the argument implementation of the definition of merk, the definition of domain name, definition of passing off, passing off in use related by merk and domain name and the rules of law in Indonesia related by merk, domain name and passing off. Big wishes in the future it can assist as a basic reference and legal considerations which are useful in Indonesian law practice. There are two passing off related to the merk and domain name, called Crybersquatting and Tiposquatting. Domain name rules are not regulated clearly in merk regulation named Act No. 15 of 2001. It regulated in PP 24 Year 1993 about The Class List of Goods or Services In Merk, Telecommunications are included in the goods or services in merk. Domain name are regulated in UDRP (Uniform Dispute Resolution Policy with competent institutions called ICANN (Internet Corporation for Assigned Names and Numbers. Dalam dunia maya (cyber world, kita sering mendengar istilah domain name. Domain name adalah nama unik yang diberikan untuk mengidentifikasi nama server komputer seperti web server atau email server di

  7. Semantic Web Compatible Names and Descriptions for Organisms

    Science.gov (United States)

    Wang, H.; Wilson, N.; McGuinness, D. L.

    2012-12-01

    Modern scientific names are critical for understanding the biological literature and provide a valuable way to understand evolutionary relationships. To validly publish a name, a description is required to separate the described group of organisms from those described by other names at the same level of the taxonomic hierarchy. The frequent revision of descriptions due to new evolutionary evidence has lead to situations where a single given scientific name may over time have multiple descriptions associated with it and a given published description may apply to multiple scientific names. Because of these many-to-many relationships between scientific names and descriptions, the usage of scientific names as a proxy for descriptions is inevitably ambiguous. Another issue lies in the fact that the precise application of scientific names often requires careful microscopic work, or increasingly, genetic sequencing, as scientific names are focused on the evolutionary relatedness between and within named groups such as species, genera, families, etc. This is problematic to many audiences, especially field biologists, who often do not have access to the instruments and tools required to make identifications on a microscopic or genetic basis. To better connect scientific names to descriptions and find a more convenient way to support computer assisted identification, we proposed the Semantic Vernacular System, a novel naming system that creates named, machine-interpretable descriptions for groups of organisms, and is compatible with the Semantic Web. Unlike the evolutionary relationship based scientific naming system, it emphasizes the observable features of organisms. By independently naming the descriptions composed of sets of observational features, as well as maintaining connections to scientific names, it preserves the observational data used to identify organisms. The system is designed to support a peer-review mechanism for creating new names, and uses a controlled

  8. Current Trends in Name Giving among Bulgarians: A Study of the Names of Newborns in the Sofia Region

    Directory of Open Access Journals (Sweden)

    Maya Vlahova-Angelova

    2017-11-01

    Full Text Available The article showcases a large-scale study of the modern Bulgarian anthroponymic system conducted by the Applied Onomastics section of the Bulgarian Academy of Sciences Institute for the Bulgarian Language (IBL with the aim of revealing the current trends in the choice of personal names by the Bulgarians at the beginning of the 21st century. The study focuses on personal names of Bulgarians born in 2010 in the Sofia region, as extracted from the Unified System of Civil Registration and Administrative Services of the Population of the Republic of Bulgaria. The total number of births this year was 1,005, of which 51.5% were boys, 48.5% were girls. Statistical and linguistic analysis of names allowed to measure the popularity of both individual personal names and different name types. It shows the quantitative ratio between most commonly chosen names and those of a singular use in relation to the total number of anthroponyms in the corpus, and proves that the male names are more sustainable in terms of usage than female. The derivational and etymological analysis of personal names helped to identify the productive word-formation types of names and the so-called “unisex names,” to distinguish between the native Bulgarian and the borrowed foreign names, as well as to classify graphic and phonetic variants of the same anthroponym. A number of quantitative comparisons were made between certain categories of names, for example, between compound (two-stem personal names (such as Miroslav and simple names (such as Biser, showing the ratio of the two-component personal names (such as Anna-Maria to the rest of the anthroponyms. It was found that the Bulgarian anthroponymic system in the beginning of the 21st century is more open to the non-adapted foreign names (like Mishel, Nancy, shows wider usage of diminutive “unisex names” (Moni, Stephy, Toni, as well as the growing popularity of shortened forms used as official names (Alex, Boni, Pepi, and the

  9. Polypropylene obtained through zeolite supported catalysts

    International Nuclear Information System (INIS)

    Bastos, Queli C.; Marques, Maria de Fatima V.

    2004-01-01

    Propylene polymerizations were carried out with φ 2 C(Flu)(Cp)ZrCl 2 and SiMe 2 (Ind)2ZrCl 2 catalysts supported on silica, zeolite sodic mordenite (NaM) and acid mordenite (HM). The polymerizations were performed at different temperatures and varying aluminium/zirconium molar ratios ([Al]/[Zr]). The effect of these reaction parameters on the catalyst activity was investigated using a proposed statistical experimental planning. In the case of f 2 C(Flu)(Cp)ZrCl 2 , SiO 2 and NaM were used as support and the catalyst performance evaluated using toluene and pentane as polymerization solvent. The molecular weight, molecular weight distribution, melting point and crystallinity of the polymers were examined. The results indicate very high activities for the syndiospecific heterogeneous system. Also, the polymers obtained had superior Mw and stereo regularity. (author)

  10. Selective Oxidations using Nanostructured Heterogeneous Catalysts

    DEFF Research Database (Denmark)

    Mielby, Jerrik Jørgen

    and because they produce H2O as the only by-product. Chapter 1 gives a short introduction to basic concepts in heterogeneous catalysis and green chemistry. Furthermore, the chapter gives an overview of the most important strategies to synthesise functional nanostructured materials and highlights how detailed......The aim of this thesis is to investigate and develop new efficient methods to oxidise alcohols and amines using heterogeneous catalysts and either O2 or H2O2 as oxidants. From an economic and environmental point of view, these oxidants are ideal, because they are cheap and readily available...... understanding of size, shape and structure can help in the development of new and more efficient heterogeneous catalysts. The chapter is not intended to give a complete survey, but rather to introduce some of the recent developments in the synthesis of nanostructured heterogeneous catalysts. Finally...

  11. Polypropylene obtained through zeolite supported catalysts

    Directory of Open Access Journals (Sweden)

    Queli C. Bastos

    2004-01-01

    Full Text Available Propylene polymerizations were carried out with f2C(Flu(CpZrCl2 and SiMe2(Ind2ZrCl2 catalysts supported on silica, zeolite sodic mordenite (NaM and acid mordenite (HM. The polymerizations were performed at different temperatures and varying aluminium/zirconium molar ratios ([Al]/[Zr]. The effect of these reaction parameters on the catalyst activity was investigated using a proposed statistical experimental planning. In the case of f2C(Flu(CpZrCl2, SiO2 and NaM were used as support and the catalyst performance evaluated using toluene and pentane as polymerization solvent. The molecular weight, molecular weight distribution, melting point and crystallinity of the polymers were examined. The results indicate very high activities for the syndiospecific heterogeneous system. Also, the polymers obtained had superior Mw and stereoregularity.

  12. Deactivation of molybdate catalysts by nitrogen bases

    Energy Technology Data Exchange (ETDEWEB)

    Furimsky, E.

    1982-10-01

    Nitrogen bases present in petroleum deactivate the surface of molybdate catalysts. The detrimental effect is attributed either to interactions of the bases with Lewis sites via unpaired electrons on nitrogen or to their ability to remove proton from the surface. The later effect results in a decrease of concentration of Bronsted sites known to be active in catalytic reactions. This enhances rate of coke forming reactions. Resistence of molybdate catalysts to coke formation depends on the form and redistribution of active ingredients on the surface. This can be effected by conditions applied during preparation and pretreatment of the catalysts. Processing parameters used during catalytic hydrotreatment are also important; i.e., the coke formation is slow under conditions ensuring high rate of removal of basic nitrogen containing compounds.

  13. Automotive catalyst strategies for future emission systems

    International Nuclear Information System (INIS)

    Williamson, W.B.; Summers, J.C.; Scaparo, J.A.

    1992-01-01

    This paper reports that while significant advances in Pt/Rh three-way catalyst (TWC) formulations have been accomplished, the use of Pd-containing catalysts for three-way emission control are of interest for overall noble metal cost reduction, lower Rh usage, and potential durability improvements. Applications of Pd are demonstrated for replacement of Pt in conventional Pt/Rh TWC systems, for use in Pd-only three-way catalysts and for lowering methanol and formaldehyde emissions at close-coupled locations on a methanol-fueled vehicle. The individual contributions of Pt, Pd and Rh for aged three-way performance indicate significant advantages of using Pd over Pt. A comparison of vehicle system control strategies illustrates that higher system temperatures significantly lower HC emissions, while air/fuel control strategies are most critical in lowering NO x emissions

  14. Protein Scaffolding for Small Molecule Catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Baker, David [Univ. of Washington, Seattle, WA (United States)

    2014-09-14

    We aim to design hybrid catalysts for energy production and storage that combine the high specificity, affinity, and tunability of proteins with the potent chemical reactivities of small organometallic molecules. The widely used Rosetta and RosettaDesign methodologies will be extended to model novel protein / small molecule catalysts in which one or many small molecule active centers are supported and coordinated by protein scaffolding. The promise of such hybrid molecular systems will be demonstrated with the nickel-phosphine hydrogenase of DuBois et. al.We will enhance the hydrogenase activity of the catalyst by designing protein scaffolds that incorporate proton relays and systematically modulate the local environment of the catalyticcenter. In collaboration with DuBois and Shaw, the designs will be experimentally synthesized and characterized.

  15. Process for the regeneration of metallic catalysts

    Science.gov (United States)

    Katzer, James R.; Windawi, Hassan

    1981-01-01

    A method for the regeneration of metallic hydrogenation catalysts from the class consisting of Ni, Rh, Pd, Ir, Pt and Ru poisoned with sulfur, with or without accompanying carbon deposition, comprising subjecting the catalyst to exposure to oxygen gas in a concentration of about 1-10 ppm. intermixed with an inert gas of the group consisting of He, A, Xe, Kr, N.sub.2 and air substantially free of oxygen to an extent such that the total oxygen molecule throughout is in the range of about 10 to 20 times that of the hydrogen sulfide molecular exposure producing the catalyst poisoning while maintaining the temperature in the range of about 300.degree. to 500.degree. C.

  16. Alternative deNOx catalysts and technologies

    DEFF Research Database (Denmark)

    Due-Hansen, Johannes

    The present thesis entitled Alternative deNOx Catalysts and technologies revolves around the topic of removal of nitrogen oxides. Nitrogen oxides, NOx, are unwanted byproducts formed during combustion (e.g. in engines or power plants). If emitted to the atmosphere, they are involved...... in the formation of acid rain and photochemical smog. Some basic concepts and reactions regarding the formation and removal of NOx are presented in chapter 1 and 2. Two approaches are undertaken in the present work to reduce the emission of NOx: by means of catalytic removal, and by NO absorption in ionic liquids....... The commercial catalyst used for the selective catalytic reduction (SCR) of nitrogen oxides exhibits high activity and selectivity towards N2. However, the vanadia-titania-based catalyst used is very sensitive to deactivation by alkali-species (primarily potassium), which are typically present in high amounts...

  17. Cerium promoted Fischer-Tropsch catalysts

    International Nuclear Information System (INIS)

    Fiato, R.A.; Bar-Gadda, R.; Miseo, S.

    1987-01-01

    This patent describes a hydrocarbon synthesis catalyst composition comprising sintered combination metal oxides having the following components in the stated weight percentage of the catalyst composition: (a) about 5 to about 80 weight percent Fe oxide; (b) about 4 to about 20 weight percent Zn oxide; (c) about 10 to about 40 weight percent Ti and/or Mn oxide; (d) about 1 to about 5 weight percent K, Rb, and/or Cs oxide; and (e) about 1 to about 10 weight percent Ce oxide, such that where the catalyst contains Fe, the sintered combination comprises a series of Fe, Zn, and/or Ti and/or Mn spinels and oxides of K, Rb and/or Cs, dispersed in a Ce oxide matrix

  18. Ship-in-a-bottle catalysts

    Science.gov (United States)

    Haw, James F.; Song, Weiguo

    2006-07-18

    In accordance with the present invention there is provided a novel catalyst system in which the catalytic structure is tailormade at the nanometer scale using the invention's novel ship-in-a-bottle synthesis techniques. The invention describes modified forms of solid catalysts for use in heterogeneous catalysis that have a microporous structure defined by nanocages. Examples include zeolites, SAPOs, and analogous materials that have the controlled pore dimensions and hydrothermal stability required for many industrial processes. The invention provides for modification of these catalysts using reagents that are small enough to pass through the windows used to access the cages. The small reagents are then reacted to form larger molecules in the cages.

  19. Study of ammonia synthesis over uranium catalysts

    International Nuclear Information System (INIS)

    Spitsyn, V.I.; Erofeev, B.V.; Mikhajlenko, I.E.; Gorelkin, I.I.; Ivanov, L.S.

    1980-01-01

    The effect of induced radiactivity and chemical composition of uranium catalysts on their catalytic activity in the ammonia synthesis reaction has been studied. The catalyst samples comprise pieces of metal uranium and chip irradiated in nuclear reactor by the 4.3x10 16 n/cm 2 integral flux of slow neutrons. Studies of catalytic activity was carried out at 1 atm and 340-510 deg C when stoichiometric nitrogen-hydrogen mixture passed through the following installation. At different temperatures uranium nitrides of different composition are shown to be formed. Uranium nitrides with the composition close to UN 2 are the samples with the highest catalYtic activity. The reduction of catalytic activity of uranium catalysts with the increased temperature of their formation above 400 deg C is explained by low catalytic activity of forming UNsub(1.7) in comparison with UN 2 . Catalytic properties of irradiated and nonirradiated samples do not differ from one another

  20. Productions of palm oil bio diesel whit heterogeneous basic catalysts compared to conventional homogeneous catalysts

    International Nuclear Information System (INIS)

    Rios, Luis A; Franco C, Alexander; Zuleta S, Ernesto

    2009-01-01

    The conventional process to produce biodiesel involves the presence of homogeneous basic catalysts. However, these catalysts have disadvantages associated to the need of purification steps, which increase the cost of the final product and generate pollution problems caused by the effluents. This paper compares different homogeneous and heterogeneous catalysts for the biodiesel production from palm oil. For this, heterogeneous catalysts supported on alumina were prepared and characterized by nitrogen adsorption, scanning electron microscopy, energy dispersive X ray spectroscopy and X ray diffraction. Transesterification of palm oil with methanol was accomplished at 60 celsius degrade and one hour, varying methanol/oil ratio, the type of catalyst and its concentration. Yields of the reaction and purity of the so obtained biodiesel were evaluated. Comparing the catalysts performance, based on the amount, was found that sodium methoxide (CH 3 ONa) and potassium carbonate supported on alumina (K 2 CO 3 /Al 2 O 3 ) were the catalysts that give the higher purity of biodiesel (96.8 and 95.85% respectively). When was determined the active site quality, by dividing the performance by each mole of active sites, it was found that calcined Na 2 SO 4 /Al 2 O 3 has the most active sites.

  1. CHARACTERIZATION OF H-Y AND CR-Y ZEOLITE CATALYSTS DURING THE OXIDATIVE DESTRUCTION OF CFC11 AND CFC12

    Science.gov (United States)

    The long term stability-deactivation characteristics of two Y zeolite catalysts, namely H-Y and cation exchanged Cr-Y, were studied during the oxidative destruction of CFC11 and CFC12 feeds. Experiments were carried out at 300 degrees C and 500 h-1 space velocity. Properties of...

  2. Concerning the Deactivation of Cobalt(III)-Based Porphyrin and Salen Catalysts in Epoxide/CO 2 Copolymerization

    KAUST Repository

    Xia, Wei

    2015-02-05

    © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim. Functioning as active catalysts for propylene oxide (PO) and carbon dioxide copolymerization, cobalt(III)-based salen and porphyrin complexes have drawn great attention owing to their readily modifiable nature and promising catalytic behavior, such as high selectivity for the copolymer formation and good regioselectivity with respect to the polymer microstructure. Both cobalt(III)-salen and porphyrin catalysts have been found to undergo reduction reactions to their corresponding catalytically inactive cobalt(II) species in the presence of propylene oxide, as evidenced by UV/Vis and NMR spectroscopies and X-ray crystallography (for cobalt(II)-salen). Further investigations on a TPPCoCl (TPP=tetraphenylporphyrin) and NaOMe system reveal that such a catalyst reduction is attributed to the presence of alkoxide anions. Kinetic studies of the redox reaction of TPPCoCl with NaOMe suggests a pseudo-first order in cobalt(III)-porphyrin. The addition of a co-catalyst, namely bis(triphenylphosphine)iminium chloride (PPNCl), into the reaction system of cobalt(III)-salen/porphyrin and PO shows no direct stabilizing effect. However, the results of PO/CO2 copolymerization by cobalt(III)-salen/porphyrin with PPNCl suggest a suppressed catalyst reduction. This phenomenon is explained by a rapid transformation of the alkoxide into the carbonate chain end in the course of the polymer formation, greatly shortening the lifetime of the autoreducible PO-ring-opening intermediates, cobalt(III)-salen/porphyrin alkoxides. CO2 saves: The deactivation of cobalt(III)-porphyrin and salen catalysts in propylene oxide/carbon dioxide copolymerization is systematically investigated, revealing a proposed mechanism for the catalyst reduction (see scheme).

  3. Concerning the Deactivation of Cobalt(III)-Based Porphyrin and Salen Catalysts in Epoxide/CO 2 Copolymerization

    KAUST Repository

    Xia, Wei; Salmeia, Khalifah A.; Vagin, Sergei I.; Rieger, Bernhard

    2015-01-01

    © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim. Functioning as active catalysts for propylene oxide (PO) and carbon dioxide copolymerization, cobalt(III)-based salen and porphyrin complexes have drawn great attention owing to their readily modifiable nature and promising catalytic behavior, such as high selectivity for the copolymer formation and good regioselectivity with respect to the polymer microstructure. Both cobalt(III)-salen and porphyrin catalysts have been found to undergo reduction reactions to their corresponding catalytically inactive cobalt(II) species in the presence of propylene oxide, as evidenced by UV/Vis and NMR spectroscopies and X-ray crystallography (for cobalt(II)-salen). Further investigations on a TPPCoCl (TPP=tetraphenylporphyrin) and NaOMe system reveal that such a catalyst reduction is attributed to the presence of alkoxide anions. Kinetic studies of the redox reaction of TPPCoCl with NaOMe suggests a pseudo-first order in cobalt(III)-porphyrin. The addition of a co-catalyst, namely bis(triphenylphosphine)iminium chloride (PPNCl), into the reaction system of cobalt(III)-salen/porphyrin and PO shows no direct stabilizing effect. However, the results of PO/CO2 copolymerization by cobalt(III)-salen/porphyrin with PPNCl suggest a suppressed catalyst reduction. This phenomenon is explained by a rapid transformation of the alkoxide into the carbonate chain end in the course of the polymer formation, greatly shortening the lifetime of the autoreducible PO-ring-opening intermediates, cobalt(III)-salen/porphyrin alkoxides. CO2 saves: The deactivation of cobalt(III)-porphyrin and salen catalysts in propylene oxide/carbon dioxide copolymerization is systematically investigated, revealing a proposed mechanism for the catalyst reduction (see scheme).

  4. Direct esterification of olive-pomace oil using mesoporous silica supported sulfonic acids

    Directory of Open Access Journals (Sweden)

    F. Alrouh

    2017-02-01

    Full Text Available Mesoporous silica MCM-41 and SBA-15 containing propyl sulfonic acid groups were synthesized according to the literature and were characterized by X-ray diffraction, N2 adsorption and the H+ exchange capacities of the sulfonic acid groups were titrated. The esterification reaction of glycerol with olive-pomace oil has been carried out by using prepared functionalized mesoporous silica (MCM-41 and SBA-15 as catalysts. It has been monitored by GC two fatty acids (palmitic and oleic acids as reactants in olive-pomace oil and their related monoacylglycerols (Glycerol monopalmitate GMP and monooleate GMO as reaction product. The catalytic activities of the functionalized mesoporous silica were compared with commercial catalysts, these included homogeneous catalysts (p-toluenesulfonic acid and heterogeneous catalysts (Amberlyst-15. The total yield of monoacylglycerols (GMO + GMP was nearly 40%. Remarkably, we found that MCM-41-SO3H was recycled at least 3 times without any loss of activity.

  5. New sulfide catalysts for the hydroliquefaction of coal

    NARCIS (Netherlands)

    Vissers, J.P.R.; Oers, van E.M.; Beer, de V.H.J.; Prins, R.

    1987-01-01

    Possibilities for the preparation of new metal sulfide catalyst systems based on carbon carriers having favourable textural and surface properties have been explored, and attention has been given to the characterization (structure) and evaluation (hydrosulfurization activity) of these catalysts. Two

  6. Immobilization of molecular catalysts in supported ionic liquid phases.

    Science.gov (United States)

    Van Doorslaer, Charlie; Wahlen, Joos; Mertens, Pascal; Binnemans, Koen; De Vos, Dirk

    2010-09-28

    In a supported ionic liquid phase (SILP) catalyst system, an ionic liquid (IL) film is immobilized on a high-surface area porous solid and a homogeneous catalyst is dissolved in this supported IL layer, thereby combining the attractive features of homogeneous catalysts with the benefits of heterogeneous catalysts. In this review reliable strategies for the immobilization of molecular catalysts in SILPs are surveyed. In the first part, general aspects concerning the application of SILP catalysts are presented, focusing on the type of catalyst, support, ionic liquid and reaction conditions. Secondly, organic reactions in which SILP technology is applied to improve the performance of homogeneous transition-metal catalysts are presented: hydroformylation, metathesis reactions, carbonylation, hydrogenation, hydroamination, coupling reactions and asymmetric reactions.

  7. Sulfur Tolerance of Carbide Catalysts Under Hydrocarbon Reforming Conditions

    National Research Council Canada - National Science Library

    Thomson, William

    2004-01-01

    .... These conditions are all related to lowering gas-solid mass transfer rate has also been determined that tedious TPR catalyst synthesis techniques are not necessary to achieve either catalyst activity or stability...

  8. Dearomatization of jet fuel on irradiated platinum-supported catalyst

    International Nuclear Information System (INIS)

    Mucka, V.; Ostrihonova, A.; Kopernicky, I.; Mikula, O.

    1983-01-01

    The effect of ionizing radiation ( 60 Co #betta#-rays) on Pt-supported catalyst used for the dearomatization of jet fuel with distillation in the range 395 to 534 K has been studied. Pre-irradiation of the catalyst with doses in the range 10 2 to 5 x 10 4 Gy leads to the partial catalyst activation. Irradiation of the catalyst enhances its resistance to catalyst poisons, particularly to sulphur-compounds, and this is probably the reason for its catalytic activity being approx. 60 to 100% greater than that of un-irradiated catalyst. Optimum conditions for dearomatization on the irradiated catalyst were found and, by means of a rotary three-factorial experiment, it was shown that these lie at lower temperatures and lower pressures than those for un-irradiated catalyst. (author)

  9. In situ Transmission Electron Microscopy of catalyst sintering

    DEFF Research Database (Denmark)

    DeLaRiva, Andrew T.; Hansen, Thomas Willum; Challa, Sivakumar R.

    2013-01-01

    Recent advancements in the field of electron microscopy, such as aberration correctors, have now been integrated into Environmental Transmission Electron Microscopes (TEMs), making it possible to study the behavior of supported metal catalysts under operating conditions at atomic resolution. Here......, we focus on in situ electron microscopy studies of catalysts that shed light on the mechanistic aspects of catalyst sintering. Catalyst sintering is an important mechanism for activity loss, especially for catalysts that operate at elevated temperatures. Literature from the past decade is reviewed...... along with our recent in situ TEM studies on the sintering of Ni/MgAl2O4 catalysts. These results suggest that the rapid loss of catalyst activity in the earliest stages of catalyst sintering could result from Ostwald ripening rather than through particle migration and coalescence. The smallest...

  10. Method of performing sugar dehydration and catalyst treatment

    Science.gov (United States)

    Hu, Jianli [Kennewick, WA; Holladay, Johnathan E [Kennewick, WA; Zhang, Xinjie [Burlington, MA; Wang, Yong [Richland, WA

    2010-06-01

    The invention includes a method of treating a solid acid catalyst. After exposing the catalyst to a mixture containing a sugar alcohol, the catalyst is washed with an organic solvent and is then exposed to a second reaction mixture. The invention includes a process for production of anhydrosugar alcohol. A solid acid catalyst is provided to convert sugar alcohol in a first sample to an anhydrosugar alcohol. The catalyst is then washed with an organic solvent and is subsequently utilized to expose a second sample. The invention includes a method for selective production of an anhydrosugar. A solid acid catalyst is provided within a reactor and anhydrosugar alcohol is formed by flowing a starting sugar alcohol into the reactor. The acid catalyst is then exposed to an organic solvent which allows a greater amount of additional anhydrosugar to be produced than would occur without exposing the acid catalyst to the organic solvent.

  11. Calcium and lanthanum solid base catalysts for transesterification

    Science.gov (United States)

    Ng, K. Y. Simon; Yan, Shuli; Salley, Steven O.

    2015-07-28

    In one aspect, a heterogeneous catalyst comprises calcium hydroxide and lanthanum hydroxide, wherein the catalyst has a specific surface area of more than about 10 m.sup.2/g. In another aspect, a heterogeneous catalyst comprises a calcium compound and a lanthanum compound, wherein the catalyst has a specific surface area of more than about 10 m.sup.2/g, and a total basicity of about 13.6 mmol/g. In further another aspect, a heterogeneous catalyst comprises calcium oxide and lanthanum oxide, wherein the catalyst has a specific surface area of more than about 10 m.sup.2/g. In still another aspect, a process for preparing a catalyst comprises introducing a base precipitant, a neutral precipitant, and an acid precipitant to a solution comprising a first metal ion and a second metal ion to form a precipitate. The process further comprises calcining the precipitate to provide the catalyst.

  12. Catalysts for oxidation of mercury in flue gas

    Science.gov (United States)

    Granite, Evan J [Wexford, PA; Pennline, Henry W [Bethel Park, PA

    2010-08-17

    Two new classes of catalysts for the removal of heavy metal contaminants, especially mercury (Hg) from effluent gases. Both of these classes of catalysts are excellent absorbers of HCl and Cl.sub.2 present in effluent gases. This adsorption of oxidizing agents aids in the oxidation of heavy metal contaminants. The catalysts remove mercury by oxidizing the Hg into mercury (II) moieties. For one class of catalysts, the active component is selected from the group consisting of iridium (Ir) and iridum-platinum (Ir/Pt) alloys. The Ir and Ir/Pt alloy catalysts are especially corrosion resistant. For the other class of catalyst, the active component is partially combusted coal or "Thief" carbon impregnated with Cl.sub.2. Untreated Thief carbon catalyst can be self-activating in the presence of effluent gas streams. The Thief carbon catalyst is disposable by means of capture from the effluent gas stream in a particulate collection device (PCD).

  13. Enhancement of alkylation catalysts for improved supercritical fluid regeneration

    Science.gov (United States)

    Ginosar, Daniel M.; Petkovic, Lucia M.

    2010-12-28

    A method of modifying an alkylation catalyst to reduce the formation of condensed hydrocarbon species thereon. The method comprises providing an alkylation catalyst comprising a plurality of active sites. The plurality of active sites on the alkylation catalyst may include a plurality of weakly acidic active sites, intermediate acidity active sites, and strongly acidic active sites. A base is adsorbed to a portion of the plurality of active sites, such as the strongly acidic active sites, selectively poisoning the strongly acidic active sites. A method of modifying the alkylation catalyst by providing an alkylation catalyst comprising a pore size distribution that sterically constrains formation of the condensed hydrocarbon species on the alkylation catalyst or by synthesizing the alkylation catalyst to comprise a decreased number of strongly acidic active sites is also disclosed, as is a method of improving a regeneration efficiency of the alkylation catalyst.

  14. SSZ-13-supported manganese oxide catalysts for low temperature ...

    Indian Academy of Sciences (India)

    YONGZHOU YE

    Their performances for the selective catalytic reduction (SCR) of NOx with NH3 were evaluated. ... catalysts have received considerable attention.2,3 More- over, catalysts ..... zeolite channels or causing agglomeration on the cat- alyst surface ...

  15. Design of sintering-stable heterogeneous catalysts

    DEFF Research Database (Denmark)

    Gallas-Hulin, Agata

    One of the major issues in the use of metal nanoparticles in heterogeneous catalysis is sintering. Sintering occurs at elevated temperatures because of increased mobility of nanoparticles, leading to their agglomeration and, as a consequence, to the deactivation of the catalyst. It is an emerging...... problem especially for the noble metals-based catalysis. These metals being expensive and scarce, it is worth developing catalyst systems which preserve their activity over time. Encapsulation of nanoparticles inside zeolites is one of the ways to prevent sintering. Entrapment of nanoparticles inside...

  16. Catalyst for reforming hydrocarbons with water vapors

    International Nuclear Information System (INIS)

    Nicklin, T.; Farrington, F.; Whittaker, J.R.

    1979-01-01

    The catalyst should reform hydrocarbons with water vapour. It consists of a carrier substance (preferably clay) on whose surface the catalytically active substances are formed. By impregnation one obtains this with a mixture of thermally destructable nickel and uranium compounds and calcination of the impregnated carrier. The catalyst is marked by a definite weight ratio of uranium to nickel (about 0.6 to 1), the addition of barium compounds and a maximum limit of these additives. All details of manufacture and the range of variations are described in detail. (UWI) [de

  17. Asymptotic stability of a catalyst particle

    DEFF Research Database (Denmark)

    Wedel, Stig; Michelsen, Michael L.; Villadsen, John

    1977-01-01

    The catalyst asymptotic stability problem is studied by means of several new methods that allow accurate solutions to be calculated where other methods have given qualitatively erroneous results. The underlying eigenvalue problem is considered in three limiting situations Le = ∞, 1 and 0. These a......The catalyst asymptotic stability problem is studied by means of several new methods that allow accurate solutions to be calculated where other methods have given qualitatively erroneous results. The underlying eigenvalue problem is considered in three limiting situations Le = ∞, 1 and 0...

  18. Production of olefins from bioethanol. Catalysts, mechanism

    Directory of Open Access Journals (Sweden)

    Kusman Dossumov

    2012-12-01

    Full Text Available This review describes methods of catalytic obtaining from bioethanol of valuable industrial products – olefins, particularly ethylene. Аmong olefins, ethylene is the most popular key raw material of petrochemical synthesis. The scope of appllication of ethylene is almost unlimited in petrochemical products: polyethylene, ethylbenzene, styrene, ethylene dichloride, vinyl chloride etc. It also examines catalysts for the production of olefins and their properties. The most promising and commercially advantageous process of ethylene production by catalytic dehydration of ethanol on catalysts based on modified alumina. And this review discusses the mechanisms of catalytic conversion of ethanol to ethylene.

  19. Characterization of steam-reforming catalysts

    Directory of Open Access Journals (Sweden)

    Santos D. C. R.M.

    2004-01-01

    Full Text Available The effect of the addition of Mg and Ca to Ni/ a-Al2O3 catalysts was investigatedstudied, aiming to detail the promotion mechanismaddress their role as promoters in the steam reforming reaction. Temperature- programmed reduction and H2 and CO temperature-programmed desorption experiments indicated that Mg interacts with the metallic phase. Mg-promoted catalysts showed a greater difficulty for Ni precursors reduction besides different probe molecules (H2 and CO adsorbed states. In the conversion of cyclohexane, Mg inhibited the formation of hydrogenolysis products. Nonetheless, the presence of Ca did not influence the metallic phase.

  20. Characterization of alumina supported molybdenum catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Pastura, N M; Carmo, L M.P.M.; Sachett, C M.M.; Lam, Y L [Instituto Militar de Engenharia, Rio de Janeiro (Brazil). Secao de Quimica

    1983-10-01

    In order to optimize a bifunctional catalyst (acid and hydrogenating) of Mo/Al/sub 2/O/sub 3/, oxygen adsorption at 195 K and ethanol dehydration at 480-520 K were carried out using a series of these catalysts. The increase of Mo content increased the quantity of adsorbed oxygen, thus indicating that the number of hydrogenating sites also increased. The specific activity of ethanol dehydration varied slightly, indicating that the number of acid sites remains almost constant. On the other hand, the selectivity in ethylene (versus ether) increased markedly. This may be attributed to the increase in acid force of the acid sites.