WorldWideScience

Sample records for castor

  1. Castor oil overdose

    Science.gov (United States)

    Castor oil is a yellowish liquid often used as a lubricant and in laxatives. This article discusses poisoning from swallowing a large amount (overdose) of castor oil. This is for information only and not for ...

  2. The CASTOR initiative

    Energy Technology Data Exchange (ETDEWEB)

    Le Thiez, Pierre [GEOGREEN (France)

    2008-07-15

    In this paper it is spoken over the CASTOR project, which has 31 partners of 12 European countries. Also it is spoken on the strategy for the CO{sub 2} reduction in Europe; what on the capture and post-combustion has been done, and what as far as geologic CO{sub 2} storage has been accomplished. [Spanish] En esta ponencia se habla sobre el proyecto Castor, el cual cuenta con 31 socios de 12 paises europeos. Tambien se habla sobre la estrategia para la reduccion de CO{sub 2} en Europa; lo que se ha hecho en cuanto a captura post-combustion y lo que se ha hecho para el almacenamiento geologico de CO{sub 2}.

  3. ECRH on CASTOR

    Czech Academy of Sciences Publication Activity Database

    Preinhaelter, Josef; Žáček, František; Irzak, M. A.; Vahala, L.; Vahala, G.

    2000-01-01

    Roč. 50, S 3 (2000), s. 51-56. ISSN 0011-4626. [Symposium on Plasma Physics and Technology/19th./. Prague, 06.06.2000-09.06.2000] R&D Projects: GA ČR GA202/00/1215; GA ČR GA202/97/0778 Institutional research plan: CEZ:AV0Z2043910 Keywords : plasma * tokamak * CASTOR Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 0.298, year: 2000

  4. Biotechnology for Castor oil Production

    Science.gov (United States)

    We conducted a series of seed development studies in castor and L. fendleri, including seed morphogenesis, oil and storage protein accumulation and lipid gene expression. In castor, the entire course of seed development can be divided into eight stages and each stage can be distinguished by seed co...

  5. Induced mutations in castor

    International Nuclear Information System (INIS)

    Castor (Ricinus communis L.) is an important oilseed crop in India. To create variability mutations were induced in two cultivars 'TMV5' (maturing in 130-140 days) and 'CO1' (perennial type). Gamma rays and diethyl sulphate and ethidium bromide were used for seed treatment. Ten doses, from 100 to 1000 Gy were employed. For chemical mutagenesis five concentrations of mutagenes from 10 to 50 mM were tried. No economic mutants could be isolated after treatment with the chemical mutagens. The following economic mutants were identified in the dose 300 Gy of gamma rays. Annual types from perennial CO 1 castor CO 1 is a perennial variety (8-10 years) with bold seeds (100 seed weight 90 g) and high oil content (57%). Twenty-one lines were isolated with annual types (160-180 days) with high yield potential as well as bold seeds and high oil content. These mutants, identified in M3 generation were bred true in subsequent generations up to M8 generation. Critical evaluation of the mutants in yield evaluation trials is in progress

  6. 21 CFR 172.876 - Castor oil.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Castor oil. 172.876 Section 172.876 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN... Multipurpose Additives § 172.876 Castor oil. The food additive castor oil may be safely used in accordance...

  7. Toxin content of commercial castor cultivars

    Science.gov (United States)

    The castor plant Ricinus communis L. is the source of castor oil which has numerous uses and is a key chemical feedstock for an array of products from polymers to cosmetics. Although castor was once widely grown throughout the world, the presence of the toxic protein ricin has deterred the re-introd...

  8. LHCD experiments on tokamak CASTOR

    International Nuclear Information System (INIS)

    A short survey is given of the experimental activities at the small Prague tokamak CASTOR. They concern primarily the LH current drive using multijunction waveguide grills as launching antennae. During two last years the, efforts were focused on a study of the electrostatic and magnetic fluctuations under conditions of combined inductive/LHCD regimes and of the relation of the level of these fluctuations to the anomalous particles transport in tokamak CASTOR. Results of the study are discussed in some detail. (author). 24 figs., 51 refs

  9. Effect of glyphosate on the castor plant Ricinus communis L

    Science.gov (United States)

    The presence of a toxin in the castor seed has been a major impediment to the reintroduction of castor as a domestic crop in the US. Because dehiscent forms of castor are invasive and castor seed remains viable for years under the right conditions, there is concern that if castor were widely cultiva...

  10. CASTOR Calorimeter Installation Review at CMS

    CERN Multimedia

    CERN Video Productions

    2011-01-01

    This test is a part of CASTOR EDR process. The CASTOR phys-tech review held on 14 Jan 2011 and the subsequent EDR held on 17 Jun 2011, the CMS Management Board has endorsed a strategy in which CASTOR is removed during the 2011 Year-End Technical Stop, but is then refurbished, replacing a substantial fraction of the phototubes, so that it is ready for re-installation in the Technical Stop just before 2012 heavy-ion operation.

  11. Castor Oil-Based Biodegradable Polyesters.

    Science.gov (United States)

    Kunduru, Konda Reddy; Basu, Arijit; Haim Zada, Moran; Domb, Abraham J

    2015-09-14

    This Review compiles the synthesis, physical properties, and biomedical applications for the polyesters based on castor oil and ricinoleic acid. Castor oil has been known for its medicinal value since ancient times. It contains ∼90% ricinoleic acid, which enables direct chemical transformation into polyesters without interference of other fatty acids. The presence of ricinoleic acid (hydroxyl containing fatty acid) enables synthesis of various polyester/anhydrides. In addition, castor oil contains a cis-double bond that can be hydrogenated, oxidized, halogenated, and polymerized. Castor oil is obtained pure in large quantities from natural sources; it is safe and biocompatible. PMID:26301922

  12. Weed management strategies for castor bean crops

    Directory of Open Access Journals (Sweden)

    Augusto Guerreiro Fontoura Costa

    2014-04-01

    Full Text Available Castor bean crops are agriculturally relevant due to the quality and versatility of their oil, both for the chemical industry and for biodiesel production. Proper weed management is important for both the cultivation and the yield of castor bean crops; therefore, the intention of the present work is to review pertinent information regarding weed management, including the studies regarding weed interference periods, chemical controls for use in different crop production systems and herbicide selectivity, for castor bean crops. Weed science research for castor bean crops is scarce. One of the main weed management challenges for castor bean crops is the absence of herbicides registered with the Ministry of Agriculture, Livestock and Food Supply (MALFS. Research for viable herbicides for weed control in castor bean crops should be directed by research and/or rural extension institutions, associations and farmers cooperatives, as well as by manufactures, for the registration of these selective herbicides, which would be primarily used to control eudicotyledons in castor bean crops. New studies involving the integration of weed control methods in castor bean also may increase the efficiency of weed management, for both small farmers using traditional crop methods in the Brazilian Northeast region, as well as for areas with the potential for large scale production, using conservation tillage systems, such as the no-tillage crop production system.

  13. Synthesis of novel castor oil phosphonates

    Science.gov (United States)

    Castor oil has served as a versatile hydroxy fatty acid (HFA); its principle component, ricinoleic acid, can be isolated from castor oil and has been modified extensively for a number of applications. Additionally, phosphonates and their corresponding phosphonic acids are a functional moiety that ha...

  14. Thermoanalytical characterization of castor oil biodiesel

    Energy Technology Data Exchange (ETDEWEB)

    Conceicao, Marta M.; Fernandes, Valter J. [Universidade Federal do Rio Grande do Norte, Departamento de Quimica, Laboratorio de Combustiveis, Natal, RN, Lagoa Nova, CEP 59072970 (Brazil); Candeia, Roberlucia A.; Bezerra, Aline F.; Souza, Antonio G. [Universidade Federal da Paraiba, Departamento Quimica, Joao Pessoa, PB (Brazil); Silva, Fernando C. [Universidade Federal do Maranhao, Sao Luis, Maranhao (Brazil)

    2007-06-15

    The castor oil seed has 47-49% of oil. Biodiesel obtained from castor oil has a lower cost compared to the ones obtained from other oils, as due its solvability in alcohol transesterification occurs without heating. The use of biodiesel will allow a reduction on the consumption of petroleum-derived fuels minimizing the harmful effects on the environment. This work wants to provide a thermoanalytical and physical-chemistry characterization of castor oil and biodiesel. Biodiesel was obtained with methyl alcohol and characterized through several techniques. Gas chromatography indicated methyl ester content of 97.7%. The volatilization of biodiesel starts and finishes under inferior temperatures than the beginning and final volatilization temperatures of castor oil. Biodiesel data are very close to the volatilization temperatures of conventional diesel. (author)

  15. Weed management strategies for castor bean crops

    OpenAIRE

    Augusto Guerreiro Fontoura Costa; Valdinei Sofiatti; Cleber Daniel de Góes Maciel; Juliana Parisotto Poletine; João Igor de Sousa

    2014-01-01

    Castor bean crops are agriculturally relevant due to the quality and versatility of their oil, both for the chemical industry and for biodiesel production. Proper weed management is important for both the cultivation and the yield of castor bean crops; therefore, the intention of the present work is to review pertinent information regarding weed management, including the studies regarding weed interference periods, chemical controls for use in different crop production systems and herbicide s...

  16. Modified Castor Oil as an Epoxy Resin Curing Agent

    OpenAIRE

    Patel, B. P.; H. S. Patel; Patel, S R

    2004-01-01

    A castor oil, an agricultural product, is an unsaturated material. Hence the castor oil is brominated by bromine liquid. The brominated castor oil (BCO) was then reacted with excess of aliphatic diamines viz; ethylene diamine, 1,3-propane diamine and 1,6-hexane diamine. The resultant amino functionalized castor oil (ACO) samples were then characterized by elemental analysis, IR spectral study and number of amino groups. All the three ACO samples were then employed for the curing of commercial...

  17. 75 FR 44917 - Castor Oil, Ethoxylated, Dioleate; Tolerance Exemption

    Science.gov (United States)

    2010-07-30

    ... AGENCY 40 CFR Part 180 Castor Oil, Ethoxylated, Dioleate; Tolerance Exemption AGENCY: Environmental... requirement of a tolerance for residues of castor oil, ethoxylated, dioleate; when used as an inert ingredient... permissible level for residues of castor oil, ethoxylated, dioleate on food or feed commodities. DATES:...

  18. Tape write-efficiency improvements in CASTOR

    International Nuclear Information System (INIS)

    The CERN Advanced STORage manager (CASTOR) is used to archive to tape the physics data of past and present physics experiments. For reasons of physical storage space, all of the tape resident data in CASTOR are repacked onto higher density tapes approximately every two years. Improving the performance of writing files smaller than 2GB to tape is essential in order to keep the time needed to repack all of the tape resident data within a period of no more than 1 year. This paper reports on the solution to writing efficiently to tape that is currently in its early deployment phases at CERN.

  19. Gamma ray induced female mutation in castor

    International Nuclear Information System (INIS)

    Three female mutants in castor (Ricinus communis L.) were obtained from 100 to 125 kR gamma-rays treated M2 population. The racemes of these mutants bore only pistillate flowers. This character is monogenic, recessive and these mutants can be used for large scale hybrid seed production

  20. Tough Blends of Polylactide and Castor Oil

    Energy Technology Data Exchange (ETDEWEB)

    Robertson, Megan L.; Paxton, Jessica M.; Hillmyer, Marc A. (UMM)

    2012-10-10

    Poly(l-lactide) (PLLA) is a renewable resource polymer derived from plant sugars with several commercial applications. Broader implementation of the material is limited due to its inherent brittleness. We show that the addition of 5 wt % castor oil to PLLA significantly enhances the overall tensile toughness with minimal reductions in the modulus and no plasticization of the PLLA matrix. In addition, we used poly(ricinoleic acid)-PLLA diblock copolymers, synthesized entirely from renewable resources, as compatibilizers for the PLLA/castor oil blends. Ricinoleic acid, the majority fatty acid comprising castor oil, was polymerized through a lipase-catalyzed condensation reaction. The resulting polymers contained a hydroxyl end-group that was subsequently used to initiate the ring-opening polymerization of L-lactide. The binary PLLA/castor oil blend exhibited a tensile toughness seven times greater than neat PLLA. The addition of block copolymer allowed for control over the morphology of the blends, and even further improvement in the tensile toughness was realized - an order of magnitude larger than that of neat PLLA.

  1. Castor bean response to zinc fertilization

    Energy Technology Data Exchange (ETDEWEB)

    Chaves, Lucia Helena Garofalo; Cunha, Tassio Henrique Cavalcanti da Silva; Lima, Vinicius Mota; Cabral, Paulo Cesar Pinto; Barros Junior, Genival; Lacerda, Rogerio Dantas de [Universidade Federal de Campina Grande (UAEAg/UFCG), PB (Brazil). Unidade Academica de Engenharia Agricola

    2008-07-01

    Zinc is a trace element and it is absolutely essential for the normal healthy growth of plants. This element plays a part of several enzyme systems and other metabolic functions in the plants. Castor beans (Ricinus communis L.) crop is raising attention as an alternative crop for oil and biodiesel production. Despite the mineral fertilization is an important factor for increasing castor beans yield, few researches has been made on this issue, mainly on the use of zinc. In order to evaluate the effects of zinc on growth of this plant an experiment was carried out in a greenhouse, in Campina Grande, Paraiba State, Brazil, from July to December 2007. The substrate for the pot plants was a 6 mm-sieved surface soil (Neossolo Quartzarenico). The experimental design was a completely randomized with three replications. The treatments were composed of five levels of Zn (0; 2; 4; 6 and 8 mg dm{sup -3}), which were applied at the time of planting. One plant of castor bean, cultivar BRS 188 - Paraguacu, was grown per pot after thinning and was irrigated whenever necessary. Data on plant height, number and length of leaves and stem diameter were measured at 21, 34, 77 and 103 days after planting. Under conditions that the experiment was carried out the results showed that the Zn levels used, did not affect the castor bean plants growth. (author)

  2. Phenylpropanoid esters of lesquerella and castor oil

    Science.gov (United States)

    Lesquerella (LO) and castor oil (CO) were esterified at the secondary hydroxyl groups of their 14-hydroxyeicos-cis-11-enoic fatty acids and 12-hydroxyoctadec-cis-9-enoic fatty acids, respectively, with 4-acetoxy-3-methoxycinnamic acid (acetoxyferulic acid). The unconventional esterifications were co...

  3. The Castor Plant: Technology and Biotechnology

    Science.gov (United States)

    Production of hydroxy fatty acids in plants is of current interest principally due to the novel properties, physical and chemical, that are characteristic of hydroxy fatty acids. Castor oil is currently the only major source of hydroxy fatty acids. It has a long history in medicinal applications, se...

  4. Castor Bean Organelle Genome Sequencing and Worldwide Genetic Diversity Analysis

    OpenAIRE

    Rivarola, Maximo; Foster, Jeffrey T.; Chan, Agnes P.; Williams, Amber L.; Rice, Danny W; Liu, Xinyue; Melake-Berhan, Admasu; Huot Creasy, Heather; Puiu, Daniela; Rosovitz, M. J.; Khouri, Hoda M.; Beckstrom-Sternberg, Stephen M.; Allan, Gerard J; Keim, Paul; Ravel, Jacques

    2011-01-01

    Castor bean is an important oil-producing plant in the Euphorbiaceae family. Its high-quality oil contains up to 90% of the unusual fatty acid ricinoleate, which has many industrial and medical applications. Castor bean seeds also contain ricin, a highly toxic Type 2 ribosome-inactivating protein, which has gained relevance in recent years due to biosafety concerns. In order to gain knowledge on global genetic diversity in castor bean and to ultimately help the development of breeding and for...

  5. Polydimethylsiloxane and Castor Oil Comodified Waterborne Polyurethane

    OpenAIRE

    Xuan Ji; Yanming Zhou; Baoling Zhang; Caiying Hou; Guozhang Ma

    2013-01-01

    In view of both improving properties of waterborne polyurethane (WPU) and sufficient utilization of renewable resources, a series of polydimethylsiloxane (PDMS) and castor oil (C.O.) comodified anionic WPUs with internal cross-linking was prepared through a prepolymer mixing process. The chemical structure of synthesized polymers was characterized by Fourier transforms infrared spectroscopy (FT-IR). In comparison with traditional linear WPU synthesized from petroleum-based polyols, these nove...

  6. Compression tests of castor oil biopolymer

    OpenAIRE

    Amauri Bravo Ferneda; Romeu Rony Cavalcante da Costa; Volnei Tita; Sérgio Persival Baroncini Proença; Jonas de Carvalho; Benedito de Moraes Purquerio

    2006-01-01

    Many methods have been developed to test and evaluate the mechanical properties of the biopolymer from castor oil employed in implants and osteo-repositions, among other things. Most of the methods are performed under quasi-static and cyclic loads (creep and relaxation tests) and under high strain rate, uniaxial compression conditions. This paper presents and discusses the development and applicability of a simple load-application apparatus, devised to reduce shear and barrelling effects on s...

  7. Synthesis of branched naphthoquinones from castor oil

    Directory of Open Access Journals (Sweden)

    Adriano Olímpio da Silva

    2012-06-01

    Full Text Available The naphthoquinones are cyclic aromatic α,β-dienonas with a basic framework derived from naphthalene. They are also found in many higher plants, algae, fungi and as the product of the  metabolism  of some  bacteria  having large biologica activity described in the literature such as antibacterial, anti-inflammatory, antitumor, anticancer and trypanocidal [1-3]. Castor oil is an abundant raw material in Brazil of great versatility and, it is present in biodiesel production, surfactants, cosmetics and others. Considering the importance of naphthoquinones and, the availability of the ricinoleic acid from castor oil, the aim of this study was the preparation of new branched naphthoquinones in order to test their trypanocidal activity. Castor oil was submitted to saponification with sodium hydroxide, ethanol and water under reflux for 6 h. We then carried out an acid hydrolysis with hydrochloric acid and the formed ricinoleic acid was extracted with ethyl acetate. Following, through Kochi-Anderson addition reaction it was performed the alkylation of a naphthoquinone 1 and 2, using ammonium persulfate, silver nitrate, acetonitrile and water, under heating at 70-80 ° C during 3 h, to give the branched naphthoquinones 4 and 5 (scheme 1. The naphthoquinone 3 will be similarly submitted to this procedure. The naphthoquinones 4 and 5 were purified by column chromatography on sílica gel using hexane as the eluent. The compounds were characterized by mass spectrometry and 1H and 13CNMR spectroscopy.

  8. LHCb: CASTORFS - A Filesystem to Access CASTOR

    CERN Multimedia

    Mazurov, A

    2009-01-01

    CASTOR provides a powerful and rich interface for managing files and pools of files backed by tape-storage. The API is modelled very closely on that of a POSIX filesystem, where part of the actual I/O part is handled by the rfio library. While the API is very close to POSIX it is still separated, which unfortunately makes it impossible to use standard tools and scripts straight away. This is particularly inconvenient when applications are written in languages other than C/C++ such as is frequently the case in web-apps. Here up to now the only the recourse was to use command-line utilities and parse their output, which is clearly a kludge. We have implemented a complete POSIX filesystem to access CASTOR using FUSE (Filesystem in Userspace) and have successfully tested and used this on SLC4 and SLC5 (both in 32 and 64 bit). We call it CastorFS. In this paper we will present its architecture and implementation, with emphasis on performance and caching aspects.

  9. Agronomically valuable mutant lines of castor

    International Nuclear Information System (INIS)

    Dry seeds of four castor varieties (VNIIMK 165-improved, VNIIMK 18, Chervonnaya and Antika) were treated with six chemical mutagens, N-nitroso-N-methyl urea (NMU), N-nitroso-N-ethyl urea (NEU), dimethyl sulphate (DMS), diethyl sulphate (DES), ethylenimine (EI) and 1,4-bis-diazoacetyl-butane (DAB) in various doses during 18 hours. About 40,000 plants were studied in M2 and 80 types of mutations were found, including a number of valuable mutants: short-stemmed, semi-dwarf, dwarf, early maturing, with female and interspersed types of racemes, highly productive etc. Based on trials in M3-M4, on small plots with two or three replications, the superior mutant lines were identified. The best mutants are presented in the table. Early maturation is very important for growing castor in the USSR, as it is the predecessor of winter wheat in crop rotation. The mutants M2-323 and Ml-83 are of great value as they show early maturation and high yield. Their productivity is mainly conditioned by a high percentage of interspersed plants. The reduction of plant height is of great importance for the successful combine harvesting of castor. Mutant lines M2-119 and Ml-284 characterised by low plant height and high yield are very interesting in this respect. The obtained initial material will be used in further breeding work

  10. Evaluation of Genetic Diversity of Castor Bean for Biodiesel Utilization

    Science.gov (United States)

    Castor bean (Ricinus communis L., 2n=20) is a cross-pollinated diploid species belonging to the family Euphorbiaceae instead of the Leguminosae. It is a native of Africa but may have originated in India. Castor bean plants grow as annual or perennial, depending on geographical locations, climate a...

  11. CASTOR detector. Model, objectives and simulated performance

    International Nuclear Information System (INIS)

    It is presented a phenomenological model describing the formation and evolution of a Centauro fireball in the baryon-rich region in nucleus-nucleus interactions in the upper atmosphere and at the LHC. The small particle multiplicity and imbalance of electromagnetic and hadronic content characterizing a Centauro event and also the strongly penetrating particles (assumed to be strangelets) frequently accompanying them can be naturally explained. It is described the CASTOR calorimeter, a sub detector of the ALICE experiment dedicated to the search for Centauro in the very forward, baryon-rich region of central Pb+Pb collisions at the LHC. The basic characteristics and simulated performance of the calorimeter are presented

  12. Optimization and Characterization of Castor Seed Oil

    OpenAIRE

    Bagali S. SHRIDHAR; K. V. BEENA; M. V. ANITA; K. B. PARAMJEET

    2010-01-01

    The response surface methodology (RSM) was employed to optimize the dilution level and agitation time for castor oil extraction. The % recovery of oil was investigated with respect to two variable including dilution level (X1) and agitation time (X2). As a result, a polynomial regression model equation was fitted as follows: Y1 = 47.50 + 7.41 x1 + 2.08 x2 + 0.63 x1 x2 -16.62 x12 - 2.87 x2. The optimal dilution level and agitation time were found to be 7.3 and 2.38 hr respectively. The maximum...

  13. Production of Detergent from Castor Oil

    OpenAIRE

    Abubakar Garba ISAH

    2006-01-01

    This research work was carried out with the objective of extraction of oil from castor seeds and its utilization to produce a synthetic detergent. Solvent extraction method was employed in extracting the oil and the total percent oil yield was found to be 23.8%. The experimentally determined saponification value of the oil was 183.7275mgKOH/g of oil. The detergent efficiency, determined as a measure of the foamability of the detergent was found to be 2.6cm. The pH tests revealed mildly basic ...

  14. Castor transport and storage casks for VVER and RBMK fuel assemblies

    Energy Technology Data Exchange (ETDEWEB)

    Gartz, R.; Gobler, A.; John, R.; Diersch, R. [GNB Gesellschaft fur Nuklear-Behalter mbH, Essen (Germany); Nemec, P. [Skoda Nuclear Machinery Plzen (Czech Republic)

    1998-12-31

    CASTOR casks have been successfully developed, manufactured and delivered for Russian type reactor fuel assemblies. These casks fulfill both the requirements for type B packages according to IAEA regulations and the requirements covering different accident situations to be assumed at the storage site. In the following, the CASTOR casks CASTOR 440/84, CASTOR RBMK and CASTOR VVER 1000 are described, the nuclear content is characterized and an overview about the status of licensing, manufacturing and delivery is given. (authors) 3 refs.

  15. Draft genome sequence of the ricin-producing oilseed castor bean

    OpenAIRE

    Chan, Agnes P.; Crabtree, Jonathan; Zhao, Qi; Lorenzi, Hernan; Orvis, Joshua; Puiu, Daniela; Melake-Berhan, Admasu; Kristine M Jones; Redman, Julia; Chen, Grace; Cahoon, Edgar B.; Gedil, Melaku; Stanke, Mario; Haas, Brian J.; Wortman, Jennifer R

    2010-01-01

    Castor bean (Ricinus communis) is an oil crop that belongs to the spurge (Euphorbiaceae) family. Its seeds are the source of castor oil, used for the production of high-quality lubricants due to its high proportion of the unusual fatty acid ricinoleic acid. Castor bean seeds also produce ricin, a highly toxic ribosome inactivating protein, making castor bean relevant for biosafety. We report here the 4.6X draft genome sequence of castor bean, representing the first reported Euphorbiaceae geno...

  16. Role of tachykinins in castor oil diarrhoea in rats

    OpenAIRE

    Croci, Tiziano; Landi, Marco; Emonds-Alt, Xavier; Le Fur, Gérard; Maffrand, Jean-Pierre; Manara, Luciano

    1997-01-01

    We set out to ascertain the role of tachykinins, neurokinin A and substance P, in castor oil-induced diarrhoea in rats as disclosed by the inhibitory effect of the non-peptide NK1- and NK2-receptor antagonists, SR 140333 and SR 48968, respectively.SR 48968 (0.02 to 20 μg kg−1, s.c. or p.o.), and the opioid receptor agonist loperamide (1–10 mg kg−1, p.o.), dose-dependently prevented castor oil effects: % inhibition vs castor oil, diarrhoea 0 to 100, increase in faecal mass 7 to 90 and water co...

  17. Extraction and Characterization of Drilling Fluid from Castor Oil

    OpenAIRE

    Manase Auta

    2013-01-01

    Drilling fluid is an essential component in drilling operations. It is used to prevent blowouts by creating adequate hydrostatic pressure, lubricating the walls of a well and the drill string, flushing to the surface of cuttings, and keeping the drill bit clean and cool. Extraction, characterization and formation of drilling fluid from castor seed oil were investigated. The castor seeds used were obtained from a local market and the extraction of the oil was done mechanically. The extracted o...

  18. Toxicity of ricin present in castor bean seeds

    OpenAIRE

    Nayanna Brunna da Silva Fonseca; Benito Soto-Blanco

    2014-01-01

    The castor bean (Ricinus communis) is a bush from Euphorbiacea family cultivated for obtaining oil from the seeds. This oil has broad industrial employment, particularly for biodiesel. However, castor bean seeds exhibit a potent toxin, ricin. It is a glycoprotein with highly toxic action of inactivating ribosomes. The toxic action of ricin is due to inhibition of protein synthesis in eukaryotic cells, causing cell death. Only one molecule of ricin that enters the cytosol is able to inactivate...

  19. Laser-fabricated castor oil-capped silver nanoparticles

    OpenAIRE

    Zamiri, Reza; Zakaria, Azmi; Abbastabar, Hossein; Darroudi, Majid; Husin, Mohd Shahril; Mahdi, Mohd. Adzir

    2011-01-01

    Silver nanoparticles were fabricated by ablation of a pure silver plate immersed in castor oil. A Nd:YAG-pulsed Q-switch laser with 1064-nm wavelength and 10-Hz frequency was used to ablate the plate for 10 minutes. The sample was characterized by ultraviolet-visible, atomic absorption, Fourier transform-infrared spectroscopies, and transmission electron microscopy. The results of the fabricated sample showed that the nanoparticles in castor oil were about 5-nm in diameter, well dispersed, an...

  20. CastorDB: a comprehensive knowledge base for Ricinus communis

    Directory of Open Access Journals (Sweden)

    Chattoo Bharat B

    2011-09-01

    Full Text Available Abstract Background Ricinus communis is an industrially important non-edible oil seed crop, native to tropical and subtropical regions of the world. Although, R. communis genome was assembled in 4X draft by JCVI, and is predicted to contain 31,221 proteins, the function of most of the genes remains to be elucidated. A large amount of information of different aspects of the biology of R. communis is available, but most of the data are scattered one not easily accessible. Therefore a comprehensive resource on Castor, Castor DB, is required to facilitate research on this important plant. Findings CastorDB is a specialized and comprehensive database for the oil seed plant R. communis, integrating information from several diverse resources. CastorDB contains information on gene and protein sequences, gene expression and gene ontology annotation of protein sequences obtained from a variety of repositories, as primary data. In addition, computational analysis was used to predict cellular localization, domains, pathways, protein-protein interactions, sumoylation sites and biochemical properties and has been included as derived data. This database has an intuitive user interface that prompts the user to explore various possible information resources available on a given gene or a protein. Conclusion CastorDB provides a user friendly comprehensive resource on castor with particular emphasis on its genome, transcriptome, and proteome and on protein domains, pathways, protein localization, presence of sumoylation sites, expression data and protein interacting partners.

  1. Castor oil induces laxation and uterus contraction via ricinoleic acid activating prostaglandin EP3 receptors

    OpenAIRE

    Tunaru, Sorin; Althoff, Till F.; Nüsing, Rolf M.; Diener, Martin; Offermanns, Stefan

    2012-01-01

    Castor oil is one of the oldest drugs. When given orally, it has a laxative effect and induces labor in pregnant females. The effects of castor oil are mediated by ricinoleic acid, a hydroxylated fatty acid released from castor oil by intestinal lipases. Despite the wide-spread use of castor oil in conventional and folk medicine, the molecular mechanism by which ricinoleic acid acts remains unknown. Here we show that the EP3 prostanoid receptor is specifically activated by ricinoleic acid and...

  2. Genetic and chemical evaluation of the U.S. castor germplasm collection for biodiesel production

    Science.gov (United States)

    Castor has multiple industrial applications including potential as a feedstock for biodiesel production. The oil content and fatty acid composition in castor seed are important factors to determine the price for production and affect the key fuel properties of biodiesel. The entire U.S. castor germp...

  3. Analysis of acylglycerols containing mono- and dihydroxy fatty acids in castor oil by HPLC and MS

    Science.gov (United States)

    Ricinoleate, a monohydroxy fatty acid, has many industrial uses such as the manufacture of aviation lubricant, plastic, paint and cosmetics. Ricinoleate occurs as acylglycerols (AG) in castor oil, and about 70% of castor oil is triricinolein. Castor oil is the only commercial source of ricinoleate. ...

  4. Regiospecific Quantification of Triacylglycerols Containing Ricinoleate and Dihydroxy Fatty Acids in Castor Oil by Mass Spectrometry

    Science.gov (United States)

    Ricinoleate, a monohydroxy fatty acid, has many industrial uses such as the manufacture of aviation lubricant, plastic, paint and cosmetics. Ricinoleate occurs as acylglycerols (AG) in castor oil, and about 70% of castor oil is triricinolein. Castor oil is the only commercial source of ricinoleate. ...

  5. EVALUATION OF ANTIULCER ACTIVITY OF CASTOR OIL IN RATS

    Directory of Open Access Journals (Sweden)

    Rachhadiya Rakesh M.

    2011-04-01

    Full Text Available To study the antiulcer activity of oil of Ricinus communis seed using different models of gastric ulceration in rats. Antiulcer activity of castor oil was studied in rats by administration of ethanol or aspirin or by pyloric ligation. Castor oil was administered in the dose of 500 mg/kg and 1000 mg/kg orally 30 min prior to ulcer induction. The antiulcer activity was assessed by determining and comparing the ulcer index in the test drug group with that of the ulcerated control group. Gastric total acid output and pepsin activity were estimated in the pylorus ligated rats. Ranitidine and Sucralfate were used as a reference drug. The ulcer index in the castor oil treated animals was found to be significantly less in all the models compared to ulcerated control animals. This antiulcer property was more prominent in animals in whom ulcers were induced by ethanol, aspirin and pyloric ligation. Ranitidine (30 mg/kg produced a significant gastric ulcer protection when compared with the control group. The anti-ulcer activity of castor oil was however, less than that of ranitidine. Our results suggest that castor oil possesses significant antiulcer property which could be either due to cytoprotective action of the drug or by strengthening of gastric mucosa and thus enhancing mucosal defence.

  6. Castor oil biodiesel as an alternative fuel for diesel engines

    International Nuclear Information System (INIS)

    In this paper, a study related to the production and use of castor oil biodiesel is presented. The maximum methyl esters yield of the castor oil transesterification reaction is obtained under the following conditions: ambient temperature, a molar ratio of methanol to vegetable oil equal to 9 and a catalyst percentage equal to 0.8%. The castor oil biodiesel can be blended with petroleum diesel as far as 15% in such way that the resulting blend complies with national and international technical standards for diesel fuels. Its high viscosity becomes the main difficulty for using castor oil biodiesel in engines. However this biofuel exhibits excellent cold flow properties (low values of cloud and pour points). The motor tests using castor oil biodiesel petroleum diesel blends, for the biodiesel proportion tested; show that a biodiesel percentage increase leads to an increase in the specific fuel consumption, a decrease in the fuel air ratio, a slight decrease in smoke opacity, while the fuel conversion efficiency and the CO and CO2 emissions practically remain constants

  7. The 'Castor' incidence: Statements and opinions

    International Nuclear Information System (INIS)

    Incidents like the recently unveiled, highly publicised 'Castor' incident involving real or alleged radiation hazards to the population as a consequence of nuclear activities in the broader sense, are an acute challenge to the editors of this journal, who of course are expected to promptly react and contribute information and opinions to the public debate. The editorial staff, however, is subject to restraints in such a situation as regards retrieval and scanning of reliable information. Such restraints are due not only to manpower resources, but also involve time delay aspects - who can know in advance, at the time of writing an article for a quarterly scientific journal, how the topical debate will have proceeded at the time the issue in the making will appear? The editors tried to obtain from colleagues in France and Germany their views and opinions as well as competent information, but for reasons to be respected, we have not been successful. So we decided to compile the background information and history of events published in this issue, based on information available from reliable sources, hoping that the survey will contribute to presenting a true picture of the situation. (orig./CB)

  8. Heterogeneous catalysis afford biodiesel of babassu, castor oil and blends

    International Nuclear Information System (INIS)

    This work describes the preparation of babassu, castor oil biodiesel and mixtures in various proportions of these oils, using alkaline compounds of strontium (SrCO3 + SrO + Sr (OH)2) as heterogeneous catalysts. The mixture of oils of these oleaginous sources was used in the production of biodiesel with quality parameters that meet current legislation. The catalyst was characterized by X-ray diffractometry (XDR), physisorption of gas (BET method), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDX) and Fourier transform infrared spectroscopy (FTIR). The viscometric technique was used to monitor the optimization.The transesterification reactions performed using strontium compounds reached conversion rates of 97.2% babassu biodiesel (BB), 96.4% castor oil biodiesel (COB) and 95.3% Babassu/Castor Oil Biodiesel 4:1 (BBCO41). (author)

  9. Experimental Study of Castor Oil Based Lubricant for Automotive Applications

    Directory of Open Access Journals (Sweden)

    Amit Suhane,

    2014-01-01

    Full Text Available Vegetable oils due to their better natural propertiescan be used as an alternative to reduce the dependency on the conventional lubricants. With the depletion of conventional resources at faster pace, need of hour is to approach the safer alternatives for ensuring the availability of such resources for longer periods with lesser harm to the mankind and sorroundings.This workevaluates the prospects of Castor oil based lubricant for automotive applications in contrast to the available commercial servo gear oil. Experimentation has been performed on four ball tester set up.Material used is carbon steel balls. Refined castor and mahua oils are blended in fixed ratios and subjected to friction and wear tests. Experimentation reveals that castor mahua oil blend possess immense potential in contrast to servo gear oil due to good wear reducing traits apart from environmental benefits.

  10. Heterogeneous catalysis afford biodiesel of babassu, castor oil and blends

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, Lee M.G. de; Abreu, Wiury C. de; Silva, Maria das Gracas de O. e; Matos, Jose Milton E. de; Moura, Carla V.R. de; Moura, Edmilson M. de, E-mail: mmoura@ufpi.edu.br [Universidade Federal do Piaui (UFPI), Teresina, PI (Brazil). Departamento de Quimica; Lima, Jose Renato de O.; Oliveira, Jose Eduardo de [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP/IQ/CEMPEQC), Araraquara, SP (Brazil). Instituto de Quimica. Centro de Monitoramento e Pesquisa da Qualidade de Combustiveis, Biocombustiveis, Petroleo e Derivados

    2013-04-15

    This work describes the preparation of babassu, castor oil biodiesel and mixtures in various proportions of these oils, using alkaline compounds of strontium (SrCO{sub 3} + SrO + Sr (OH){sub 2}) as heterogeneous catalysts. The mixture of oils of these oleaginous sources was used in the production of biodiesel with quality parameters that meet current legislation. The catalyst was characterized by X-ray diffractometry (XDR), physisorption of gas (BET method), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDX) and Fourier transform infrared spectroscopy (FTIR). The viscometric technique was used to monitor the optimization.The transesterification reactions performed using strontium compounds reached conversion rates of 97.2% babassu biodiesel (BB), 96.4% castor oil biodiesel (COB) and 95.3% Babassu/Castor Oil Biodiesel 4:1 (BBCO41). (author)

  11. Mixed Field Modification of Thermally Cured Castor Oil Based Polyurethanes

    International Nuclear Information System (INIS)

    Thermally cured polyurethanes were prepared from castor oil and hexamethylene diisocyanatee (HMDI). Due to the long aliphatic chain of the castor oil component of polyurethane, thermal curing of castor oil based polyurethane (COPU) is limited by increasing polymer viscosity. To enhance further crosslinking, COPUs were subjected to a range of accumulated doses (0.0-3.0 MGy) produced by the mixed ionizing field of the SLOWPOKE-2 research reactor. The physico-mechanical properties of COPU, unirradiated and irradiated, were characterized by mechanical tests. Increased bond formation resulting from radiation-induced crosslinking was confirmed by favorable increases in mechanical properties and by solid-state 13C-NMR and FTIR spectra

  12. Mixed field radiation modification of polyurethanes based on castor oil

    International Nuclear Information System (INIS)

    Polyurethane is among the polymers and polymer-based composite materials being investigated at the Royal Military College of Canada for the fabrication of leak-tight containers for the long-term disposal of radioactive waste. Due to the long aliphatic chain of the castor oil component of polyurethane, thermal curing of castor oil based polyurethane (COPU) is limited by increasing polymer viscosity. To enhance further crosslinking, COPUs were subjected to a range of doses (0.0 - 3.0 MGy) produced by the mixed ionizing radiation field of a SLOWPOKE-2 research nuclear reactor. The tensile mechanical properties of castor oil based polyurethanes (COPU), unirradiated and irradiated, were characterized by mechanical tensile tests. Increases in mechanical strength due to radiation-induced crosslinking and limitations of thermal curing were confirmed by tensile tests and changing 13C-NMR and FTIR spectra. (author)

  13. CASTOR: Cathode/Anode Satellite Thruster for Orbital Repositioning

    Science.gov (United States)

    Mruphy, Gloria A.

    2010-01-01

    The purpose of CASTOR (Cathode/Anode Satellite Thruster for Orbital Repositioning) satellite is to demonstrate in Low Earth Orbit (LEO) a nanosatellite that uses a Divergent Cusped Field Thruster (DCFT) to perform orbital maneuvers representative of an orbital transfer vehicle. Powered by semi-deployable solar arrays generating 165W of power, CASTOR will achieve nearly 1 km/s of velocity increment over one year. As a technology demonstration mission, success of CASTOR in LEO will pave the way for a low cost, high delta-V orbital transfer capability for small military and civilian payloads in support of Air Force and NASA missions. The educational objective is to engage graduate and undergraduate students in critical roles in the design, development, test, carrier integration and on-orbit operations of CASTOR as a supplement to their curricular activities. This program is laying the foundation for a long-term satellite construction program at MIT. The satellite is being designed as a part of AFRL's University Nanosatellite Program, which provides the funding and a framework in which student satellite teams compete for a launch to orbit. To this end, the satellite must fit within an envelope of 50cmx50cmx60cm, have a mass of less than 50kg, and meet stringent structural and other requirements. In this framework, the CASTOR team successfully completed PDR in August 2009 and CDR in April 2010 and will compete at FCR (Flight Competition Review) in January 2011. The complexity of the project requires implementation of many systems engineering techniques which allow for development of CASTOR from conception through FCR and encompass the full design, fabrication, and testing process.

  14. The use of castor oil on cervical ripening in pregnancies

    OpenAIRE

    Saadat, Z; M. Abedzadeh; F. Saberi

    2008-01-01

    AbstractBackground and Purpose: The role of castor oil on cervical ripening is poorly understood and data in examining its efficacy within clinical trial are limited. This study was performed to evaluate the effect of utilizing castor oil on cervical ripening in pregnancies after 40 weeks.Materials and Methods: A randomized clinical trial study was performed on 200 pregnant women after 40 weeks in Shabikhany Hospital, in the City of Kashan, in 2004 to 2006. Women were divided to two groups (1...

  15. Studies on Ricinus Lipase Enzyme Isolated from Castor Seeds

    OpenAIRE

    Alka Srivastava; Rashmi Mohan Mathur; Rachna Prakash; Shashi Agrawal

    2016-01-01

    Healthy and bold seeds of castor variety “Aruna“ were collected. The de-hulled castor kernels were separated from seed coat and finely grounded in an electric grinder. The powdered kernels were passed through 60 mesh sieve and defatted using n-hexane in a soxhlet extractor. After complete extraction of oil seed meal was made free from solvent at low temperature. The defatted seed meal was pulverized and again passed through 60-mesh sieve to get final product .The RICINUS LIPASE source thus, o...

  16. Large nonlocal nonlinear optical response of castor oil

    Science.gov (United States)

    Souza, Rogério F.; Alencar, Márcio A. R. C.; Meneghetti, Mario R.; Hickmann, Jandir M.

    2009-09-01

    The nonlocal nonlinearity of castor oil was investigated using the Z-scan technique in the CW regime at 514 nm and in femtosecond regime at 810 nm. Large negative nonlinear refractive indexes of thermal origin, thermo-optical coefficients and degree of nonlocality were obtained for both laser excitation wavelengths. The results indicate that the electronic part of the nonlinear refractive index and nonlinear absorption were negligible. Our results suggest that castor oil is promising candidate as a nonlinear medium for several nonlocal optical applications, such as in spatial soliton propagation, as well as a dispersant agent in the measurement of absorptive properties of nanoparticles.

  17. EVALUATION OF ANTIULCER ACTIVITY OF CASTOR OIL IN RATS

    OpenAIRE

    Rachhadiya Rakesh M.; Kabra Mahaveer Prasad; Shete Rajkumar V

    2011-01-01

    To study the antiulcer activity of oil of Ricinus communis seed using different models of gastric ulceration in rats. Antiulcer activity of castor oil was studied in rats by administration of ethanol or aspirin or by pyloric ligation. Castor oil was administered in the dose of 500 mg/kg and 1000 mg/kg orally 30 min prior to ulcer induction. The antiulcer activity was assessed by determining and comparing the ulcer index in the test drug group with that of the ulcerated control group. Gastric ...

  18. Synthesis of carbon nanotubes using natural carbon precursor: Castor oil

    Science.gov (United States)

    Raziah, A. Z.; Junizah, A. R.; Saifuddin, N.

    2012-09-01

    Castor oil has long been an article of commerce due to its versatility as it is widely used as a starting material for many industrial chemical products because of its unique structure. In this study, carbon nanotubes has been synthesized by thermal decomposition of castor oil in nitrogen atmosphere at 300-400δC using custom-made microwave processing unit. The precursor material was catalyzed by iron clusters originating from the addition of ferrocene. The morphology and characterization of the CNTs were studied and discussed by transmission electron microscopy (TEM).

  19. HYDRA and COBRA-SFS temperature calculations for CASTOR-IC, REA-2023, CASTOR-V/21, and TN-24P

    International Nuclear Information System (INIS)

    The COBRA-SFS and HYDRA thermal analysis computer codes were used to perform ''pretest'' or ''prelook'' calculations on the CASTOR-1C, REA-2023, CASTOR-V/21 and TN-24P spent fuel storage casks. HYDRA results were compared to 24 different test runs, while COBRA-SFS results were compared to 25 runs. These comparisons included tests with three different fill media, vacuum (low-pressure nitrogen), helium, and nitrogen, in both horizontal and vertical casks. The mean difference in peak clad temperature for of all comparisons was +100C for HYDRA and +30C for COBRA-SFS. Their respective standard deviations were +-100C and +-110C. These comparisons have demonstrated that even with the limited amount of experience in modeling the thermal characteristics of casks, both codes do an excellent job of predicting peak clad temperatures for a wide variety of cask configurations

  20. GNS Castor V/21 Headspace Gas Sampling 2014

    Energy Technology Data Exchange (ETDEWEB)

    Winston, Philip Lon [Idaho National Laboratory

    2016-01-01

    Prior to performing an internal visual inspection, samples of the headspace gas of the GNS Castor V/21 cask were taken on June 12, 2014. These samples were taken in support of the CREIPI/Japanese nuclear industry effort to validate fuel integrity without visual inspection by measuring the 85Kr content of the cask headspace

  1. Detoxification of castor meal through reactive seed crushing

    Science.gov (United States)

    Non-edible oil crops, such as castor or jatropha, contain several toxic components. Post-harvest treatments should be used to reduce the risks associated with the possible dispersion of toxic compounds in the environment. A new processing technology named Reactive Seed Crushing was developed, which ...

  2. GNS Castor V/21 Headspace Gas Sampling 2014

    Energy Technology Data Exchange (ETDEWEB)

    Winston, Philip Lon [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-01-01

    Prior to performing an internal visual inspection, samples of the headspace gas of the GNS Castor V/21 cask were taken on June 12, 2014. These samples were taken in support of the CREIPI/Japanese nuclear industry effort to validate fuel integrity without visual inspection by measuring the 85Kr content of the cask headspace

  3. Measurements with an emissive probe in the CASTOR tokamak

    Czech Academy of Sciences Publication Activity Database

    Schrittwieser, R.; Adámek, Jiří; Balan, P.; Hron, Martin; Ionita, C.; Jakubka, Karel; Kryška, Ladislav; Martines, E.; Stöckel, Jan; Tichý, M.; Van Oost, G.

    2002-01-01

    Roč. 44, č. 5 (2002), s. 567-578. ISSN 0741-3335 R&D Projects: GA ČR GA202/00/1217 Institutional research plan: CEZ:AV0Z2043910 Keywords : CASTOR tokamak, plasma Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 2.121, year: 2002

  4. 21 CFR 178.3280 - Castor oil, hydrogenated.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Castor oil, hydrogenated. 178.3280 Section 178.3280 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) INDIRECT FOOD ADDITIVES: ADJUVANTS, PRODUCTION AIDS, AND SANITIZERS Certain Adjuvants and Production Aids...

  5. Develop a New Lesquerella fendleri Crop for Castor Oil Production

    Science.gov (United States)

    Seed oil of Lesquerella fendleri contains a valuable hydroxy fatty acid (HFA), lesquerolic acid (20:1OH). The conventional source of HFA is ricinoleic acid (18:1OH) from castor seeds. Ricinoleic acid and its derivatives are used as raw materials for numerous industrial products, such as lubricants, ...

  6. Edge plasma studies on the CASTOR tokamak

    International Nuclear Information System (INIS)

    This paper will present an overview of recent edge plasma experiments on the CASTOR tokamak (R = 0.4 m, a = 0.085 m, BT = 1.3 T, Ip ∼ 10 kA, ne ∼ 2 x 1019 m-3). A poloidal array of 96 Langmuir probes, 16 magnetic coils, and 16 Hall sensors surrounding the full poloidal circumference monitors poloidal profiles of electric field, density, and magnetic field with high temporal resolution. A radial array of Langmuir probes measures the radial profiles of floating potential, poloidal electric field, and ion saturation current. A Gundestrup probe measures the parallel and perpendicular flows, a segmented tunnel probe measures the electron and ion temperatures. All data are acquired with 1 MHz sampling rate. First, an overview of the edge turbulence measurements will be given. Correlation analysis of the poloidal structure of the edge turbulence indicates that the behaviour of the scrape-off layer (SOL) turbulence is strongly linked to the magnetic field configuration in this region. The fluctuation measurements can be interpreted in a straightforward way assuming a single long structure, aligned with the magnetic field lines, which intersects a given poloidal cross section several times, giving rise to an apparent m = q mode. Next, behaviour of the plasma is presented for biasing experiments performed using a graphite electrode, immersed into the SOL and edge plasma, respectively. In the SOL, the measurements have shown presence of a region with long connection length (several toroidal turns), in which a biased flux tube is created. Thus, not only the radial field, but also a rather strong poloidal electric field is formed at the magnetic surface associated with the biased electrode. This poloidal field changes its sign periodically along the poloidal circumference and, as a consequence of the Epol x BT drift, the density is also poloidally modulated. The overall result is a creation of a pattern of particle flux with a strong poloidal modulation, which can be seen

  7. Castor and jatropha oils: production strategies – A review

    Directory of Open Access Journals (Sweden)

    Lago Regina C.A.

    2009-07-01

    Full Text Available The Brazilian bioenergy matrix is based on four platforms: ethanol, energy forests, residues and co-products and biodiesel. The food-energy dichotomy in the use of edible oils is one factor which has stimulated the search for non-edible oleaginous energy crops, such as many native palms. By the year 2000 Brazil had an annual deficit of 80 thousand tons of castor oil, making necessary to import oil from China and India. After a strong debate the National Program on Biodiesel Production (NPBP was launched by December 2004. After an initial excessive enthusiasm, small producers being focused in the program, a more mature and realistic planning is undertaken. Production in semi arid lands is being stimulated, mainly castor (Ricinus communis and Jatropha (Jatropha curcas. Apart from belonging to the same botanical family (Euphorbiaceae, both plants are well resistant to poor soils. Castor plant is well adapted to practically the whole country, except for some extreme areas (too low water availability or too much rain. Castor keeps being an alternative for the semi arid region but much more technology is requested to make it largely exploited. Following the petroleum crisis of 1980’s an ambitious research program on Jatropha curcas was initiated, later on discontinued and presently retaken by Embrapa and some Universities. Progress is slower than in the case of Ricinus communis. The first agronomical observations confirmed low productivity, problems with pests and diseases, high harvesting costs etc. Some strategic factors should be considered for the production of castor and Jatropha oils: 1. Production of raw materials; 2. Production of oils; 3. Detoxification and value aggregation to the extraction cakes and residues. Regarding raw material production, it is necessary a strong, long term research program on genetic breeding (short cycle varieties, with high productivity and allowing a sole harvesting, soil fertility, pest control, domestication

  8. Preparation and research on properties of castor oil as a diesel fuel additive

    OpenAIRE

    Nurbakhit Imankulov

    2012-01-01

    The research shows an opportunity of preparing biodiesel fuel on the basis of local diesel fuel and the bioadditive - castor oil. Limiting optimum concentration of introduction of the bioadditive equal was established as 5% mass ratio. The castor oil released from seeds of Palma Christi grown on experimental field. All physical and chemical characteristics of the oil including IR-spectra were determined. Operating conditions of castor oil introduction (temperature, solubility, concentra-tion,...

  9. Impacto del castor (Castor canadensis, Rodentia) en bosques de lenga (Nothofagus pumilio) de Tierra del Fuego, Chile Impact of american beaver (Castor canadensis, Rodentia) in lenga (Nothofagus pumilio) forests of Tierra del Fuego, Chile

    OpenAIRE

    Aida Baldini U; Juan Oltremari A; Mauricio Ramírez

    2008-01-01

    Castor canadensis es un roedor de Norteamérica introducido a la porción argentina de Tierra del Fuego en el año 1946, invadiendo territorios chilenos del mismo sector. En esta zona los castores construyen diques y se alimentan de material arbóreo extraído principalmente de Nothofagus pumilio. En el estudio se intentó probar que los castores provocan daño en la biomasa y volumen de los bosques de N. pumilio. Los objetivos del estudio fueron identificar los tipos de daños y cuantificar las pérd...

  10. Extraction, Characterization and Modification of Castor Seed Oil

    Directory of Open Access Journals (Sweden)

    A. D. MOHAMMED

    2006-01-01

    Full Text Available This paper carried out experimental study, through extraction and characterization of both crude and refined castor oil. Normal hexane was used as solvent for the extraction process. The oil produced was refined through degumming, neutralization and bleaching process using local adsorbent (activated clay. The characterization analysis revealed that tested parameters, which include specific gravity, refractive index, acid value, saponification value and iodine value for both crude and refined castor oil produced, were within the ASTM standard specifications. In fact the iodine value obtained (84.8 for the refined oil indicates that the oil could certainly be used as lubricant, hydraulic break fluid and protecting coatings. The oil was modified via sulphation method to produce Turkey – red oil that was tested on wooden material, paper and cloth. The test revealed that the Turkey – red oil produced is suitable to be used as a good dying agent and polish.

  11. Studies on Ricinus Lipase Enzyme Isolated from Castor Seeds

    Directory of Open Access Journals (Sweden)

    Alka Srivastava

    2016-05-01

    Full Text Available Healthy and bold seeds of castor variety “Aruna“ were collected. The de-hulled castor kernels were separated from seed coat and finely grounded in an electric grinder. The powdered kernels were passed through 60 mesh sieve and defatted using n-hexane in a soxhlet extractor. After complete extraction of oil seed meal was made free from solvent at low temperature. The defatted seed meal was pulverized and again passed through 60-mesh sieve to get final product .The RICINUS LIPASE source thus, obtained was stored in a screw capped glass vial and kept in a desiccator. As and when required portions from this preparation were used in further enzymatic studies.

  12. Biodiesel production from castor oil in Brazil: A difficult reality

    International Nuclear Information System (INIS)

    The Brazilian National Program for Production and Use of Biodiesel (PNPB in Portuguese) has created a huge demand for biodiesel in Brazil. The PNPB is strongly based on social development through the inclusion of family farmers in projects integrated with biodiesel power plants. Among the various oilseeds, castor bean (Ricinus communis L.) was identified as the ideal one to promote social development in the semi-arid region. However, although promising, the mechanisms of the federal program are still insufficient to promote the effective participation of family farmers. This research shows that companies are facing huge problems in implementing contracts with family farmers. It describes and analyzes the functioning dynamics of this agro-production chain. This paper addresses the identification and the discussion of these obstacles, in order to increase the competitiveness of the biodiesel agribusiness chain, based on castor oil social projects in Brazil.

  13. RESTORATIVE ASPECT OF CASTOR PLANT ON MAMMALIAN PHYSIOLOGY: A REVIEW

    OpenAIRE

    Attila Kádasi; Zuzana Baková; Sirotkin, Alexander V; Anupam Das Talukdar; Shubhadeep Roychoudhury; Manabendra Dutta Choudhury; Sushmita Nath; Nora Maruniaková; Adriana Kolesárová

    2011-01-01

    The castor plant (Ricinus communis L.) is a robust perennial shrub of Euphorbiaceae family and different parts of the plant are widely used by various communities and forest dwellers in many regions of the world for treating a variety of ailments. About 80% of world population is still dependent on traditional herbal medicines. The plant is documented to possess beneficial effects as anti-oxidant, antifertility, anti inflammatory, antimicrobial, central nervous system stimulant, anti diabetic...

  14. Numerical fracture analysis for the structural design of CASTOR casks

    International Nuclear Information System (INIS)

    The numerical implementation of the dynamic J-Integral is presented as one method to compute the dynamic stress intensity factor (DSIF). The applicability of the computational method is demonstrated by a finite element simulation of a free drop test of a ductile cast iron CASTOR cask with a pre-crack. The results of the simulation are contrasted with the data from the real experiment. (author)

  15. Rheological behavior of castor oil mixed with different pyromellitic esters

    OpenAIRE

    Boran Sorina; Tamas Andra

    2014-01-01

    The paper presents the rheological behavior study of castor oil mixed with different pyromellitic esters. The pyromellitic tetraesters used were obtained through the esterification of pyromellitic anhydride with a special alcohol of a complex alkyl-aryl structure (2-phenoxy-ethanol) in conjunction with a linear aliphatic alcohol with variable length (n-butanol, n-decanol). The influence of pyromellitic esters’ structure and concentration was determined, as ...

  16. Results on CASTOR Performance during LHC Run 2

    CERN Document Server

    CMS Collaboration

    2016-01-01

    The intercalibration of the gains of the fine mesh PMT's using beam-halo muons is discussed, this in combination with results of a study on the noise and baseline. Two methods on obtaining gain correction factors for reweighing the gains between different high voltage settings are compared. Results on the efficiency of a CASTOR jet trigger are compared for LHC Run 2 collision data and Monte Carlo event generator predictions.

  17. Characterization of Novel Castor Oil-Based Polyurethane Polymer Electrolytes

    OpenAIRE

    Salmiah Ibrahim; Azizan Ahmad; Nor Sabirin Mohamed

    2015-01-01

    Castor oil-based polyurethane as a renewable resource polymer has been synthesized for application as a host in polymer electrolyte for electrochemical devices. The polyurethane was added with LiI and NaI in different wt% to form a film of polymer electrolytes. The films were characterized by using attenuated total reflectance-Fourier transform infrared spectroscopy, dynamic mechanical analysis, electrochemical impedance spectroscopy, linear sweep voltammetry and transference number measurem...

  18. Experimental Study of Castor Oil Based Lubricant for Automotive Applications

    OpenAIRE

    Amit Suhane; R.M.Sarviya

    2014-01-01

    Vegetable oils due to their better natural propertiescan be used as an alternative to reduce the dependency on the conventional lubricants. With the depletion of conventional resources at faster pace, need of hour is to approach the safer alternatives for ensuring the availability of such resources for longer periods with lesser harm to the mankind and sorroundings.This workevaluates the prospects of Castor oil based lubricant for automotive applications in contrast to the ava...

  19. 75 FR 40751 - Castor Oil, Ethoxylated, Oleate; Tolerance Exemption

    Science.gov (United States)

    2010-07-14

    ...This regulation establishes an exemption from the requirement of a tolerance for residues of castor oil, ethoxylated, oleate (CAS Reg. No. 220037-02-5) with a minimum number average molecular weight (in amu) of 1,600 when used as an inert ingredient in a pesticide chemical formulation under 40 CFR 180.960. SciReg. Inc. on behalf of Rhodia, Inc, submitted a petition to EPA under the Federal......

  20. Extraction, Characterization and Modification of Castor Seed Oil

    OpenAIRE

    A. D. MOHAMMED; A. JIMOH; U. G. AKPAN

    2006-01-01

    This paper carried out experimental study, through extraction and characterization of both crude and refined castor oil. Normal hexane was used as solvent for the extraction process. The oil produced was refined through degumming, neutralization and bleaching process using local adsorbent (activated clay). The characterization analysis revealed that tested parameters, which include specific gravity, refractive index, acid value, saponification value and iodine value for both crude and refined...

  1. Low-modulus PMMA bone cement modified with castor oil

    OpenAIRE

    López, Alejandro; Hoess, Andreas; Thersleff, Thomas; Ott, Marjam; Engqvist, Håkan; Persson, Cecilia

    2011-01-01

    Some of the current clinical and biomechanical data suggest that vertebroplasty causes the development of adjacent vertebral fractures shortly after augmentation. These findings have been attributed to high injection volumes as well as high Young’s moduli of PMMA bone cements compared to that of the osteoporotic cancellous bone. The aim of this study was to evaluate the use of castor oil as a plasticizer for PMMA bone cements. The Young’s modulus, yield strength, maximum polymerization temper...

  2. Encounters between Otters (Lontra canadensis) and American Beavers (Castor canadensis)

    OpenAIRE

    Bob Arnebeck

    2004-01-01

    Six encounters between otters (Lontra canadensis) and American beavers (Castor canadensis) were observed between 1997 and 2003 at Wellesley Island State Park, New York. Contrary to the observer’s expectations, in each case the beaver moved aggressively toward the otter or otters, and the otters retreated. The author offers detailed accounts of each of the interactions, which may offer some insight into the relationship between otters and beavers. In half of the encounters, the beaver appeared...

  3. Extraction and Characterization of Drilling Fluid from Castor Oil

    Directory of Open Access Journals (Sweden)

    Manase Auta

    2013-06-01

    Full Text Available Drilling fluid is an essential component in drilling operations. It is used to prevent blowouts by creating adequate hydrostatic pressure, lubricating the walls of a well and the drill string, flushing to the surface of cuttings, and keeping the drill bit clean and cool. Extraction, characterization and formation of drilling fluid from castor seed oil were investigated. The castor seeds used were obtained from a local market and the extraction of the oil was done mechanically. The extracted oil characteristics such as specific gravity, pH, acid value, iodine value, saponification value, refractive index and viscosity were within the standard range before before formulating it to drilling fluid by the addition of additives. The result of the formulation obtained showed that the formulated drilling fluid had an electrical stability of 222 V, High Pressure/High Temperature of 8.8, mass funnel viscosity at 30 and 50 oC were 26.5 and 25 s, respectively; chemical alkalinity was 0.3 and excess lime of 0.39 Ib/bbI. The findings in this research have shown that formulated drilling fluid from castor seed oil is safe as drilling fluid and has characteristics close to that of the standard drilling mud equivalent circulating density 99. The formulated drilling fluid can adequately serve as an alternative to the commercial products.

  4. Effect of copper on castor bean (Ricinus communis L.) growth

    Energy Technology Data Exchange (ETDEWEB)

    Chaves, Lucia Helena Garofalo; Cunha, Tassio Cavalcanti da Silva; Lima, Vinicius Mota; Cabral, Paulo Cesar Pinto; Barros Junior, Genival; Lacerda, Rogerio Dantas de [Universidade Federal de Campina Grande (UAEAg/UFCG), PB (Brazil). Unidade Academica de Engenharia Agricola

    2008-07-01

    Castor beans crop (Ricinus communis L.) is raising attention as an alternative crop for oil and biodiesel production. Despite the mineral fertilization is an important factor for increasing castor yield, few research has been made on this issue, mainly on the use de copper. In order to evaluate the effects of copper on growth of this plant an experiment was carried out in a greenhouse, in Campina Grande, Paraiba State, Brazil, from July to December 2007. The substrate for the pot plants was a 6 mm-sieved surface soil (Neossolo Quartzarenico). The experimental design was a completely randomized with three replications. The treatments were composed of five levels of Cu (0; 1; 2; 3 and 4 mg dm{sup -3}), which were applied at the time of planting. One plant of castor bean, cultivar BRS 188 - Paraguacu, was grown per pot after thinning and was irrigated whenever necessary. Data on plant height, number and length of leaves and stem diameter were measured at 21, 34, 77 and 103 days after planting. Copper levels used, in general, did not affect the plant height, stem diameter and leaf area, however they influenced the leaves and shoot biomass dry mass and the quadratic trend was the best to show the behavior of these. (author)

  5. Measurement of quadratic electrogyration effect in castor oil

    Science.gov (United States)

    Izdebski, Marek; Ledzion, Rafał; Górski, Piotr

    2015-07-01

    This work presents a detailed analysis of electrogyration measurement in liquids with the usage of an optical polarimetric technique. Theoretical analysis of the optical response to an applied electric field is illustrated by experimental data for castor oil which exhibits natural optical activity, quadratic electro-optic effect and quadratic electrogyration effect. Moreover, the experimental data show that interaction of the oil with a pair of flat electrodes induces a significant dichroism and natural linear birefringence. The combination of these effects occurring at the same time complicates the procedure of measurements. It has been found that a single measurement is insufficient to separate the contribution of the electrogyration effect, but it is possible on the basis of several measurements performed with various orientations of the polarizer and the analyser. The obtained average values of the quadratic electrogyration coefficient β13 in castor oil at room temperature are from - 0.92 ×10-22 to - 1.44 ×10-22m2V-2 depending on the origin of the oil. Although this study is focused on measurements in castor oil, the presented analysis is much more general.

  6. The experiences from interim spent fuel storage operation with CASTOR 440/84 CASKS in NPP Dukovany

    International Nuclear Information System (INIS)

    In this lecture are presented: principles of the CASTOR 440/84 design; design development works; commissioning of interim spent fuel storage facility; international transports of spent fuel utilising CASTOR 440/84 casks

  7. Demodex castoris sp. nov. (Acari: Demodecidae) parasitizing Castor fiber (Rodentia), and other parasitic arthropods associated with Castor spp.

    Science.gov (United States)

    Izdebska, Joanna N; Fryderyk, Sławomira; Rolbiecki, Leszek

    2016-02-11

    A new species of demodecid mite, Demodex castoris sp. nov. (Acari: Prostigmata: Demodecidae), is described based on adult stages from the skin of the nasal region of the Eurasian beaver Castor fiber Linnaeus, 1758, collected in Poland. This is the first detection of a representative demodecid mite in rodents of the suborder Castorimorpha and also represents the first detection of a skin mite in Eurasian beavers. The new species is a small skin mite (average 173 µm in length) characterized by sexual dimorphism related to body proportions. D. castoris sp. nov. was observed in 4 out of 6 beavers examined (66.6%), with a mean intensity of 10.8 and an intensity range of 2-23 ind. host(-1). This paper also contains a checklist of parasitic arthropods known from Castor spp. PMID:26865230

  8. The use of castor oil on cervical ripening in pregnancies

    Directory of Open Access Journals (Sweden)

    Z. Saadat

    2008-01-01

    Full Text Available AbstractBackground and Purpose: The role of castor oil on cervical ripening is poorly understood and data in examining its efficacy within clinical trial are limited. This study was performed to evaluate the effect of utilizing castor oil on cervical ripening in pregnancies after 40 weeks.Materials and Methods: A randomized clinical trial study was performed on 200 pregnant women after 40 weeks in Shabikhany Hospital, in the City of Kashan, in 2004 to 2006. Women were divided to two groups (100 women in case group and 100 women in control group. Case group took 60 ml castor oil, while the control group omitted treatment. Comparison was then compared between the two groups for demographic characteristics: increase of Bishop Score, means of Bishop Score at entrance to study and 24 hours after entrance to study, onset of labor within 24 hours, method and time of delivery and newborns Apgar score by X2, followed by Fisher’s exact test, and paired-samples T and T-tests.Results: Results showed that there were no significant differences in mother’s age, education, nationality, gravidity, gestational age, parity between two groups. Paired-sample T test showed significant difference between means of Bishop Score at entrance of study and 24 hours after entrance of study in case and control groups(p=0.00. Furthermore, the mean increase of Bishop score in the case group was 4.5±3.63 versus 0.67±1.25 in the control group during the 24 hour period. During 24 hours after entrance to study, uterine contraction occurred in 70% women in case and 12% women in control groups. Statistical test showed significant difference between the two groups and an increase of Bishop Score at the onset of uterine contractions (P<0.001. There were no significant differences in method of delivery and Apgar score in their newborns between the two groups.Conclusion: The results of this study showed that use of castor oil may lead to cervical ripening in pregnant women after 40

  9. Study of the Castor Oil Plant Pie in the Planting of the Castor Beans with Different Global Density of the Soil

    OpenAIRE

    Fabiana Xavier Costa; Edivan Silva Nunes Júnior; José Sebastião de Melo Filho

    2010-01-01

    It was aimed at with this work to evaluate the chlorophyll tenor in the leaves, of potassium in the pecíolos of the castor beans, the physical analysis of the soil and the tenors of the present macronutrientes in the leaves of the castor beans cultivated with growing doses of castor oil plant pie and degrees different from density of the soil. The experiment had beginning in the period of May 02, 2006 and he/she extended to September 02, 2006, in house-of-vegetation, without atmosphere contro...

  10. Surface Coating Studies of Polyurethane Derived from [(Alkyd)-(Epoxy Resin Treated Castor Oil)] Using Isophorene Diisocynate - II

    OpenAIRE

    Dinesh. P. Patel; Kiran Nimavat; Kartik Vyas

    2012-01-01

    Castor oil (C) was reacted with profitable epoxy resin (E) (diglycidylether of bisphenol-A, DGEBF) at a range of mole ratios. The consequential products (Castor oil- Epoxy resin) were nominated as CEs. Isocyanate terminated castor oil Polyurethane (ICOPU) was prepared by reaction of castor oil and various proportion of Isophoren diisocyanate. A commercial alkyd resin was blended with various proportions of CEs and ICOPU. A unique solvent system, which shows a one – phase clear solution and a ...

  11. HYDRA and COBRA-SFS temperature calculations for CASTOR-IC, REA-2023, CASTOR-V/21, and TN-24P

    Energy Technology Data Exchange (ETDEWEB)

    Wheeler, C.L.; McCann, R.A.; Michener, T.E.; Lombardo, N.J.; Rector, D.R.

    1986-03-01

    The COBRA-SFS and HYDRA thermal analysis computer codes were used to perform ''pretest'' or ''prelook'' calculations on the CASTOR-1C, REA-2023, CASTOR-V/21 and TN-24P spent fuel storage casks. HYDRA results were compared to 24 different test runs, while COBRA-SFS results were compared to 25 runs. These comparisons included tests with three different fill media, vacuum (low-pressure nitrogen), helium, and nitrogen, in both horizontal and vertical casks. The mean difference in peak clad temperature for of all comparisons was +10/sup 0/C for HYDRA and +3/sup 0/C for COBRA-SFS. Their respective standard deviations were +-10/sup 0/C and +-11/sup 0/C. These comparisons have demonstrated that even with the limited amount of experience in modeling the thermal characteristics of casks, both codes do an excellent job of predicting peak clad temperatures for a wide variety of cask configurations.

  12. Evaluation of oil content and fatty acid composition in the USDA castor germplasm collection for biodiesel production.

    Science.gov (United States)

    Castor has potential as a feedstock for biodiesel production. The oil content and fatty acid composition in castor seed are important factors to determine the price for production and affect the key fuel properties of biodiesel. There were 1033 available castor accessions collected or donated from 4...

  13. Mass spectrometry of the lithium adducts of diacylglycerols containing hydroxy FA in castor oil and two normal FA

    Science.gov (United States)

    Castor oil can be used in industry. The molecular species of triacylglycerols containing hydroxy fatty acids (FA) in castor oil have been identified. We report here the identification of twelve diacylglycerols (DAG) containing hydroxy FA in castor oil using positive ion electrospray ionization mass ...

  14. Identification of diacylglycerol and triacylglycerol containing 11,12,13-trihydroxy-9-14-octadecadienoic acids in castor oil

    Science.gov (United States)

    Castor oil has many industrial uses. Molecular species of acylglycerols containing monohydroxy, dihydroxy and trihydroxy fatty acids in castor oil have been reported. We report here the identification of acylglycerols containing triOH18:2 fatty acid in castor oil. The structure of this novel fa...

  15. An innovative European integrated project: Castor-CO2 from capture to storage

    NARCIS (Netherlands)

    Thiez, P.L.; Mosditchian, G.; Torp, T.; Feron, P.; Ritsema, I.; Zweigel, P.; Lindeberg, E.

    2005-01-01

    This chapter gives an overview of the CASTOR (CO2, from Capture to Storage) R and D project, funded by the European Union (EU) under the 6th Framework Program. With a partnership involving Industry and Research organizations, CASTOR aims at developing new technologies for post-combustion capture and

  16. Analysis of germination of castor and peanuts seeds by 13C NMR

    International Nuclear Information System (INIS)

    Germination of castor and peanut seeds was followed by 13C NMR. Results are comparable to those observed for soybean seeds and reveal that this technique is generally applicable in cases in which a reasonable amount of soluble material is present during germination. Different pathways for oil degradation by castor and peanut seeds may be distinguished. (Author)

  17. Expression profile of the genes involved in reserve synthesis in castor (Ricinus communis L.)

    Science.gov (United States)

    Oil derived from the seed of castor (Ricinus communis L.) contains 90% ricinoleate (12-hydroxy-oleate) and has numerous industrial uses. Despite its economic importance, the production of castor oil is hampered by the presence of detrimental seed storage proteins, the toxin ricin and hyper-allergeni...

  18. Identification of acylglycerols containing dihydroxy fatty acids in castor oil by mass spectrometry

    Science.gov (United States)

    Ricinoleate, a monohydroxy fatty acid, in castor oil has many industrial uses. Dihydroxy fatty acids can also be used in industry. The C18 HPLC fractions of castor oil were used for mass spectrometry to identify the acylglycerols containing dihydroxy fatty acids. Four diacylglycerols identified were...

  19. 21 CFR 524.2620 - Liquid crystalline trypsin, Peru balsam, castor oil.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Liquid crystalline trypsin, Peru balsam, castor... NEW ANIMAL DRUGS § 524.2620 Liquid crystalline trypsin, Peru balsam, castor oil. (a)(1) Specifications... delivered to the wound site contains 0.12 milligram of crystalline trypsin, 87.0 milligrams of Peru...

  20. EVALUATION OF PHYSIOLOGY AND BIOCHEMISTRY THE CASTOR BEAN FUNCTION OF DOSES AND FERTILIZER IN SOIL

    Directory of Open Access Journals (Sweden)

    Fabiana Xavier Costa

    2011-04-01

    Full Text Available Aimed at with this work to investigate the physiology and biochemistry of the castor bean, after use of compost and organic castor bean. The trial began on October 3, 2005 ending on March 20, 2006, in green-house, controlled environment of the National Center of Cotton Research (CNPA / EMBRAPA, in Campina Grande , State of Paraiba. Was used to cultivate castor BRS Paraguaçu. We used a randomized block design with four replications, totaling 11 treatments, since they are derived from doses of castor-oil and organic compost (four doses of each and three witnesses, with further study of orthogonal contrasts . The castor bean showed effective results in the variables chlorophyll content (ppm in leaves and number of days to flowering of the first cluster (DIAFI. Compost organic waste not produced any significant result for both variables.

  1. Characterization and Digestibility of Detoxified Castor Oil Meal for Japanese Quails

    Directory of Open Access Journals (Sweden)

    PA dos Santos

    2015-12-01

    Full Text Available ABSTRACT These experiments were performed to determine the chemical composition, coefficients of nutrient and energy metabolizability, amino acid composition, and cytotoxicity of different castor oil meals subjected to different detoxification processes and added to the diet of Japanese quails. In the trial, 180 46-d-old female Japanese quails were distributed according to a completely randomized design into five treatments and with replicates of six bird each. The treatments consisted of following detoxification methods of castor oil meal: Castor oil meal A (CMA - recovery in alcohol at 80 °C for 20 minutes and drying at 80 °C; castor oil meal B (CMB and C (CMC - recovery in alcohol at 80 °C for 6 minutes, neutralization with 5% NaOH, and drying under direct sunlight sun for two days (CMB or pelleted (CMC; castor oil meal D (CMD - recovery in alcohol at 110 °C for 15 minutes and drying at 110 °C. Castor oil meal was added replacing 20% of the reference diet. There was slight chemical composition variation (1.21% in crude protein, 6% in dry matter, 2.2% in ether extract and 64 kcal/kg in gross energy among the castor oil meals submitted to the different treatments. The castor oil meal submitted to treatment C showed the highest amino acid values. In the cytotoxicity test, treatment D presented lower ricin activity. Castor oil meals A, C, and D may be included in Japanese quail diets; however, castor oil meal D is recommended due to the simplicity its industrial process, its low toxicity, and metabolizability coefficients obtained.

  2. Isocyanate-functionalized castor oil as a novel bitumen modifier

    OpenAIRE

    Cuadri Vega, Antonio Abad; García Morales, Moisés; Navarro Domínguez, Francisco Javier; Partal López, Pedro

    2013-01-01

    The use of biomaterials from renewable sources in the synthesis of polyurethane-derived polymers is lately receiving great attention from social, environmental and economic standpoints. In this work, prepolymers having different -NCO/-OH ratio were synthesized, by reaction of 4,4´-diphenylmethane diisocyanate (MDI) with castor oil (CO), to be used as modifying agent of asphaltic bitumen. Reactions between MDI and CO, performed with -NCO/-OH molar ratios of 8:1 and 4:1, have led to suitable bi...

  3. Safety analysis report for packaging (onsite) Castor GSF cask

    International Nuclear Information System (INIS)

    The CASTOR GSF packaging was designed and fabricated to be a certified Type B(U) packaging and comply with the requirements of the International Atomic Energy Agency (IAEA) for transport of up to five sealed canisters of vitrified radioactive materials. This onsite Safety Analysis Report for Packaging (SARP) provides the analysis and evaluations necessary to demonstrate that the casks, with the canister payload, meet the intent of the Type B packaging regulations set forth in 10 CFR 71 and therefore meet the onsite transportation safety requirements of WHC-CM-2-14, Hazardous Material Packaging and Shipping

  4. Global energy balance and density limit on CASTOR tokamak

    International Nuclear Information System (INIS)

    Total radiative power losses were measured with a pyroelectric detector on the CASTOR tokamak in a broad range of plasma parameters. It was shown that while the most important channel of energy losses for the low density operation (average ne19 m-3) is thermal conductivity, the high density regimes are radiative dominant. Using a simple analytic energy balance model, the connection is discussed between such a high level of radiation and the shrinking of the current channel resulting in an enhanced MHD activity. (author)

  5. Example of industrial valorisation of derivative products of Castor oil

    Directory of Open Access Journals (Sweden)

    Borg Patrick

    2009-07-01

    Full Text Available Known since antiquity, Castor Oil has been first used in medicine. Now, even if it remains present in small quantities as an excipient in many pharmaceutical specialties, it finds a lot of applicationsin cosmetics, industrial applications and chemical industry. Castor Oil specificity comes from its high content of ricinoleic acid (up to 85% that combines a double bond and an hydroxyl function in the heart of a 18 carbons linear chain. This particular structure is the key of an unique chemistry developed by ARKEMA that gives by thermal cracking a wide range of compounds with either 7 or 11 carbon atoms. A whole range of innovative chemistries and end use products are generated from these base reaction products. They are used in every-day life, to improve our comfort and safety but also in very specific applications with very high technical requirements. Synthesized from undecylenic acid, 11-amino-undecanoic acid, 100% based on renewable resources, is the precursor to biobased polymers combining high performance and sustainability: Rilsan®, Rilsan Fine Powder®, Pebax Rnew®.

  6. Purification and Biochemical Characterisation of Ricin from Castor Seeds

    Directory of Open Access Journals (Sweden)

    Om Kumar

    2004-07-01

    Full Text Available Ricin is a highly toxic plant toxin of Ricinus comtnunis seeds, commonly known as castor seeds. The toxin was extracted and purified using affinity and size exclusion  chromatography. The purity of ricin was evaluated by the sodium dodecylsulphate-polyacrylamide gel electrophoresis. Purified ricin gives a single band under non-reduced condition and two bands under reduced condition. The molecular weight of ricin was 65,0000 approx. The subunit structure of ricin on treatment with p-mercaptoethanol (1 % at molecular level revealed that the reducing agent converts ricin into two peptides. The molecular weight of these two peptides was estimated to be 34000 and 32000. The western-blot analysis revealed two dots for its two peptides in 29 kDa to 36 kDa regions. The heamagglutination litres for ricin and Ricinus communis agglutinins were 1:8 and 1:256. The purity of purified ricin was further confirmed by the electrophoresis and the western-blot analysis. The Indian variety of castor seeds, known as Ricinus communis used in this study, contains approx. 0.12 per cent ricin.

  7. Higroscopic properties of castor seeds (Ricinus Comunis L.

    Directory of Open Access Journals (Sweden)

    M. C. Gely

    2009-03-01

    Full Text Available Sorption isotherms of castor seeds were evaluated at 30, 40, 50 and 60ºC using the static gravimetric method. Sigmoid trends were observed for isotherms obtained showing a clear effect of temperature. Experimental values were adjusted using the modified isotherms of Henderson, Halsey, Oswin and Guggenheim-Anderson-de Boer (GAB. Models were compared using four statistics parameters. The results showed that Modified Henderson model adjusted adequately the experimental values in the range of temperature evaluated. The experimental values of the safe storage moisture content for castor seeds varied between 6.1 to 8.4 % (d.b. between 20 and 40ºC, showing lower values than those reported for other traditional oilseeds as sunflower or rapeseed. The sorption heats evaluated from the combination of Clapeyron equation and Modified Henderson equation varied between 3400 and 2373 kJ/kg for moisture contents between 1 and 28 % (d.b.. Through Othmer relationship the value of the ratio Lb/Lf varied between 1.01 and 1.34 (for 14.5 and 1% d.b. moisture content respectively. The values obtained showed an exponential relationship with moisture content, of the form Lb/Lf=1+0.44exp(-0.17M with a determination coefficient R² of 0.97.

  8. Characterization of Novel Castor Oil-Based Polyurethane Polymer Electrolytes

    Directory of Open Access Journals (Sweden)

    Salmiah Ibrahim

    2015-04-01

    Full Text Available Castor oil-based polyurethane as a renewable resource polymer has been synthesized for application as a host in polymer electrolyte for electrochemical devices. The polyurethane was added with LiI and NaI in different wt% to form a film of polymer electrolytes. The films were characterized by using attenuated total reflectance-Fourier transform infrared spectroscopy, dynamic mechanical analysis, electrochemical impedance spectroscopy, linear sweep voltammetry and transference number measurement. The highest conductivity of 1.42 × 10−6 S cm−1 was achieved with the addition of 30 wt% LiI and 4.28 × 10−7 S·cm−1 upon addition of 30 wt% NaI at room temperature. The temperature dependence conductivity plot indicated that both systems obeyed Arrhenius law. The activation energy for the PU-LiI and PU-NaI systems were 0.13 and 0.22 eV. Glass transition temperature of the synthesized polyurethane decreased from −15.8 °C to ~ −26 to −28 °C upon salts addition. These characterizations exhibited the castor oil-based polyurethane polymer electrolytes have potential to be used as alternative membrane for electrochemical devices.

  9. Trial of an experimental castor oil solution for cleaning dentures.

    Science.gov (United States)

    Andrade, Ingrid Machado de; Andrade, Kelly Machado de; Pisani, Marina Xavier; Silva-Lovato, Cláudia Helena; de Souza, Raphael Freitas; Paranhos, Helena de Freitas Oliveira

    2014-01-01

    Denture hygiene is essential because denture biofilm is involved in oral infections and systemic diseases. Although there are chemical agents available on the market, none of them have ideal properties and research on such products is still necessary. The aim of this study was to evaluate the efficacy of a castor bean (Ricinus communis)-based solution for removing denture biofilm, compared to two traditional products (sodium hypochlorite and alkaline peroxide). Fifty maxillary complete denture wearers were instructed to brush their dentures after meals and to immerse their dentures once a day in the following solutions: Saline (20 min; control), Polident alkaline peroxide (3 min), NaOCl (20 min) and 2% castor oil solution (20 min). Participants used each solution for a period of 7 consecutive days, according to a random sequence. After each period, the internal surfaces of maxillary complete dentures were stained with a disclosing solution (1% neutral red), photographed and the disclosed biofilm was quantified with the aid of specific software. The influence of treatments on results was verified by the Friedman test (α=0.05). Tested solutions presented significant difference (Fr=51.67; pbiofilm removal. PMID:24789291

  10. Sanitary quality of castor bean seeds (cv. IAC-226

    Directory of Open Access Journals (Sweden)

    Andréia Márcia Santos de Souza David

    2014-09-01

    Full Text Available The objective of this work was to evaluate the fungicides efficacy on the castor seeds IAC-226 sanitary quality. The seeds were treated with two doses of the fungicides captan (250 and 300 g ai 100 kg-1 seed, thiophanate-methyl (100 and 150 g ai 100 kg-1 seed and thiabendazole (100 and 150 g kg ai 100 seeds. Seeds without fungicide treatment were the control. The seeds sanitary quality was evaluated by sanity test, using 10 replications of 20 seeds per treatment/lot, superficially sterilized (sodium hypochlorite and placed in plastic boxes (gerbox with filter paper and sterilized distilled water, under controlled temperature 25°C for 20 days. Seeds were examinated individually using a stereoscopic microscope and optical microscope. The results were expressed as percentage of infected seeds. The experimental design was completely randomized in a factorial arrangement (2 x 7, two lots and seven treatments, with ten repetitions. The fungicides captan, tiabendazol and tiofanato-metílico reduced the incidence of fungi, being recommended for the castor seeds IAC-226 treatment. There was a predominance of fungi Alternaria alternata, Aspergillus flavus, Aspergillus niger, Bipolar, Botrytis ricini, Curvularia sp., Penicillium sp. and Rhizopus sp.

  11. Seed borne mycoflora of castor bean (ricinus communis l.) from pakistan

    International Nuclear Information System (INIS)

    Castor bean seeds were analyzed by using ISTA (International seed testing association) for the detection of seed borne mycoflora. Thirty one fungal species belonging to 15 genera were isolated from 12 samples of castor bean seeds collected from different areas of Pakistan. Fusarium solani, Alternaria alternata, Cephaliophora tropica were most predominant fungal species isolated while the saprophytic fungi like A. niger, A. flavus were common in all samples of castor bean seed tested. Blotter method was considered to be better technique which gave maximum number of fungi followed by agar plate and deep freezing methods. (author)

  12. Study on Emission and Performance of Diesel Engine Using Castor Biodiesel

    OpenAIRE

    2014-01-01

    This paper presents the result of investigations carried out in studying the emission and performance of diesel engine using the castor biodiesel and its blend with diesel from 0% to 40% by volume. The acid-based catalyzed transesterification system was used to produce castor biodiesel and the highest yield of 82.5% was obtained under the optimized condition. The FTIR spectrum of castor biodiesel indicates the presence of C=O and C–O functional groups, which is due to the ester compound in bi...

  13. EVALUATION OF PHYSIOLOGY AND BIOCHEMISTRY THE CASTOR BEAN FUNCTION OF DOSES AND FERTILIZER IN SOIL

    OpenAIRE

    Fabiana Xavier Costa

    2011-01-01

    Aimed at with this work to investigate the physiology and biochemistry of the castor bean, after use of compost and organic castor bean. The trial began on October 3, 2005 ending on March 20, 2006, in green-house, controlled environment of the National Center of Cotton Research (CNPA / EMBRAPA), in Campina Grande , State of Paraiba. Was used to cultivate castor BRS Paraguaçu. We used a randomized block design with four replications, totaling 11 treatments, since they are derived from doses of...

  14. Application of Factorial Design of Experiments for the Continuous Hydrogenation of Enriched Castor Oil Methyl Esters

    OpenAIRE

    Tulasi Sri Venkata Ramana Neeharika; Karna Narayana Prasanna Rani; Kasturi Venkata Sesha Adinarayana Rao; Thella Prathap Kumar; Rachapudi Badari Narayana Prasad

    2013-01-01

    Castor oil methyl esters contains nearly 90% ricinoleic acid (12-hydroxy-cis-9-octadecenoic acid). Hydrogen-ated castor oil methyl esters finds several applications in coating, lubricants formulations and pharmaceu-tical areas. The present study reports a fast, simple, efficient and continuous hydrogenation of enriched castor oil methyl ester (ECME) using 10% Pd/C catalyst at different pressures and temperatures. The range of process conditions for this study varied from 30-60 °C, 5-15 bar wi...

  15. Study on Emission and Performance of Diesel Engine Using Castor Biodiesel

    OpenAIRE

    Md. Saiful Islam; Abu Saleh Ahmed; Aminul Islam; Sidek Abdul Aziz; Low Chyi Xian; Moniruzzaman Mridha

    2014-01-01

    This paper presents the result of investigations carried out in studying the emission and performance of diesel engine using the castor biodiesel and its blend with diesel from 0% to 40% by volume. The acid-based catalyzed transesterification system was used to produce castor biodiesel and the highest yield of 82.5% was obtained under the optimized condition. The FTIR spectrum of castor biodiesel indicates the presence of C=O and C–O functional groups, which is due to the ester compound in...

  16. Unbodied dehydrated castor oil from oil of castor beans cultivated in tropical and sub tropical zones of pakistan

    International Nuclear Information System (INIS)

    Commercially available castor oil was analysed for specific gravity at 25/25 degree C (0.959), acid value (0.5), iodine value (85), refractive index at 25 degree C (1.4769), viscosity at 25 degree C (6.8), and hydroxyl value (162). Fatty acid composition, including palmitic acid (I. 7%), stearic acid (1.39%), oleic acid (5.73%), linoleic acid (6.25%), and ricinoleic acid (84.2%) was estimated by means of GLC. Unbodied dehydrated castor oil (DCO- 15) 93% was prepared by using sodium bisulphate and sodium bisulphite and other reaction conditions. Unbodied DCO was analysed for iodine value (139), acid value (3.6), refractive index at 25 degree C (1.4820), specific gravity at 25/25 degree C and 30/30 degree C (0.9333 and 0.925) viscosity at 25 degree C and 30 degree C (200 cps and 1.85 poise), respectively. Fatty acid composition was also determined to ascertain the extent of dehydration due to the formation of conjugated linoleic acid (CLA, 36.9%) and non conjugated linoleic acid (NCLA, 46.8%). Ricinoleic acid was estimated as 3.83%. Unbodied DCO-15 was in good conformance with the standard specification of ASTM and other values cited in the literature. (author)

  17. LDPE/PHB blends filled with castor oil cake

    Science.gov (United States)

    Burlein, Gustavo A.; Rocha, Marisa C. G.

    2015-05-01

    The response surface methodology (RSM) is a collection of mathematical techniques useful for developing, improving and optimizing process. In this study, RSM technique was applied to evaluate the effect of the components proportion on the mechanical properties of low density polyethylene (LDPE)/ poly (3-hydroxy-butyrate) (PHB) blends filled with castor oil cake (CC). The blends were prepared by melt mixing in a twin screw extruder. Low density polyethylene, poly (3-hydroxy-butyrate) and castor oil pressed cake were represented by the input variables designated as LDPE, PHB and CC, respectively. As it was desirable to consider the largest LDPE content in the ternary system, the components of the mixture were subjected to the following constraints: 0.7 ≤ LDPE ≤ 1.0, 0≤ PHB≤0.3 e 0 ≤ CC ≤0.3. The mechanical properties of the different mixtures were determined by conventional ASTM tests and were evaluated through analysis of variance performed by the Minitab software. Some polynomial equations were tested in order to describe the mechanical behavior of the samples. The quadratic model in pseudo components was selected for describing the tensile behavior because it was the most efficient from a statistical point of view (p-value ≤ 0.05; coefficient of determination (r2) close to 1 and variation inflation factor (VIF) values cake to LDPE. The morphological study of the materials obtained showed that LDPE/PHB blends are immiscible and form morphological structures with well distinguished phase boundaries between dispersed phase and matrix. Biodegradation was evaluated burying the samples in simulated soil for different periods of time. The LDPE/PHB/CC mixtures with higher content of PHB showed more pronounced degradation. Under the experimental conditions studied the LDPE/CC compositions presented no degradation. However, the loss of mass of the LDPE/PHB/CC mixtures was higher than the loss of mass of the corresponding LDPE/PHB binary blend. This result

  18. Isotope labeling-based quantitative proteomics of developing seeds of castor oil seed (Ricinus communis L.)

    DEFF Research Database (Denmark)

    Nogueira, Fábio C S; Palmisano, Giuseppe; Schwämmle, Veit;

    2013-01-01

    In this study, we used a mass spectrometry-based quantification approach employing isotopic (ICPL) and isobaric (iTRAQ) labeling to investigate the pattern of protein deposition during castor oil seed (Ricinus communis L.) development, including that of proteins involved in fatty acid metabolism...... give important insights into certain aspects of the biology of castor oil seed development such as carbon flow, anabolism, and catabolism of fatty acid and the pattern of deposition of SSPs, toxins, and allergens such as ricin and 2S albumins. We also found, for the first time, some genes of SSP that...... could be mapped to extant castor gene models, considerably expanding the number of proteins so far identified from developing castor seeds. Cluster validation and statistical analysis resulted in 975 protein trend patterns and the relative abundance of 618 proteins. The results presented in this work...

  19. Performance of the CASTOR calorimeter at CMS during Run II of LHC

    CERN Document Server

    Van De Klundert, Merijn H F

    2016-01-01

    The detector has pseudorapidity borders at -5.2 and -6.6. An overview is presented on the various aspects of CASTOR's performance and their relations during LHC Run 2. The equalisation of CASTOR's channels is performed using beam-halo muons. Thereafter, CASTOR's pedestal spectrum is studied. It is shown that noise estimates which are extracted using a fit, give on average a 10\\% lower threshold than statistical estimates. Gain correction factors, which are needed for the intercalibration, are obtained using a statistical, in-situ applicable method. The results of this method are shown to be reasonably consistent with laboratory measurements. Penultimately the absolute calibration is discussed, with emphasis on the relation between the scale uncertainty and CASTOR's alignment. It is shown that the alignment's contribution to the systematic uncerta...

  20. Mechanical and thermal properties of castor oil polyurethane bone cement after gamma irradiation

    International Nuclear Information System (INIS)

    Polyurethanes from castor oil are being employed as bone cement in medical applications. In this work the thermal and mechanical properties of gamma irradiated polyurethanes derivative from castor oil were investigated by instrumented indentation, thermogravimetry and scanning electron microscopy. A slightly increase in hardness is observed only for doses as high as 100 kGy. Thermal analysis indicates stability at human body temperature. The glass transition temperature has small changes after gamma irradiation. (author)

  1. ISOLATED PROTEIN FROM CASTOR BEAN, PEANUT, SOY BEAN AND SAFFLOWER MEALS

    OpenAIRE

    B.Tavasolian; S.Nikpour; B.Makanvand

    1981-01-01

    Castor bean, peanut, Soy bean and safflower protein isolates were prepared. The amino acid content of each of the protein isolates was analysed and the essential amino acid contents were compared with the FAO human requirements. The results indicated that castor bean has the highest oil and the protein content of defatted meal. Safflower 3148 (Marand, Iran) has the highest amount of essential amino acids. Peanut (Gilan Iran) has the lowest content of essential amino acids, however, in compari...

  2. Use of castor oil-based polyurethane adhesive in the production of glued laminated timber beams

    OpenAIRE

    Maximiliano dos Anjos Azambuja; Antonio Alves Dias

    2006-01-01

    Researchers from the Polymer Technology and Analytical Chemistry (LQATP) group at the São Carlos Institute of Chemistry, University of São Paulo, developed a polyurethane adhesive based on castor oil. In addition to deriving it from a renewable source, this adhesive is nonaggressive to humans and the environment. The purpose of this study is to investigate the feasible use of polyurethane adhesive based on castor oil in the production of 12 beams of Glulam, using the species Pinus caribea hon...

  3. Comparison of lubricant properties of castor oil and commercial engine oil

    OpenAIRE

    Binfa Bongfa; Peter A. Atabor; Atuci Barnabas; M.O. Adeoti

    2015-01-01

    The tribological performance of crude Nigeria-based castor oil has been investigated and compared with that of a foreign, 20W-50 high quality crankcase oil, to see its suitability as base oil for lubricating oils in indigenous vehicle and power plants engines. The experiment was conducted using a four ball tester. The results showed that unrefined castor oil has superior friction reduction and load bearing capability in an unformulated form than the commercial oil; can compete favourably with...

  4. UV and gamma irradiation effects on surface properties of polyurethane derivate from castor oil

    OpenAIRE

    Elaine C. Azevedo; Eduardo M. Nascimento; Gilberto O. Chierice; Salvador Claro Neto; Carlos M. Lepienski

    2013-01-01

    Gamma and ultraviolet radiation effects on hardness, elastic modulus and viscoelastic properties of polyurethane derived from castor oil (PU) were investigated by nanoindentation tests. Modifications on surface morphology, induced by radiation, were observed by atomic force microscopy. The polyurethane derivate from castor oil shows good resistance to gamma radiation, with only small changes in hardness, elastic modulus, viscoelastic properties and contact angle. The hardness of PU increases ...

  5. First results from sin-cos reflectometer on CASTOR

    International Nuclear Information System (INIS)

    An analysis is given of the first experimental data from a sin-cos reflectometer used at the CASTOR tokamak for the measurement of density fluctuations. The reflectometer operates at frequencies of 8.5 GHz and 10.26 GHz. Discrete Fourier transformation, fast Fourier transformation and autocorrelation analysis were used to obtain frequency spectra of density fluctuations and the time evolution of the Δτ parameter. The character of the spectra is shown to depend on the frequency used. The content of higher frequencies in the spectrum increases for density fluctuations at the plasma periphery. The correlation of fluctuations increases for the fluctuation at layers near to the plasma centrum. (J.B.) 8 figs., 5 refs

  6. Electron cyclotron emission and absorption experiment on the CASTOR tokamak

    International Nuclear Information System (INIS)

    Electron cyclotron radiation and absorption measurements on the CASTOR tokamak are reported. Emission spectra were obtained using fast-scanning Fourier spectrometer and InSb detectors, operating in the spectral range 30 to 300 GHz and receiving two orthogonal polarization components simultaneously. In the high plasma loop voltage runaway electrons gave rise to an intense broad-band emission. Runaway particles can be removed by increasing the plasma density. The electron temperature profile was deduced from thermal emission and absorption around second cyclotron harmonics. From the second and third harmonics of the non-thermal emission the energy and number of non-thermal particles can be calculated. During the lower-hybrid-current-drive (LHCD) experiments, the presence of 60 keV electrons with density of 1.1016 m-3 was deduced from emission spectra. (author). 5 figs., 6 refs

  7. Castor and Pollux - shielded cells for studying fuel treatment processes

    International Nuclear Information System (INIS)

    CASTOR and POLLUX, two alpha, beta, gamma cells are described in the present paper. They are located in the CEN at Fontenay-aux-Roses (France). They are designed for improvement studies of the various aqueous separation processes used in irradiated fuels reprocessing plants. Located in the same air-tight steel encasement, they arc inter-connected by a pneumatic transfer. These two cells have a similar in-line conception and they include: a gamma shielding in lead of 10 cm of thickness; an inner air-tight box, made with stainless steel and plexiglas, is maintained in lowering in comparison to room pressure. Eleven Hobson model seven master-slave manipulators allow inner manipulations. Then the inner equipment is described briefly. (author)

  8. The Castor Moving Group The age of Fomalhaut and Vega

    CERN Document Server

    Barrado y Navascués, D

    1998-01-01

    We have recomputed the kinematic properties of several of dozens nearby stars, to try to verify if Castor has a cohort of stars sharing the same space motion and age. We used kinematics, the location of the stars in CM diagrams, their lithium abundances, and their activity, to establish that the moving group seems to be real and to reject several stars which were believed to be part of this group. Of the initial 26 stars, we show that probably only 16 stars are physically associated. The moving group contains several A spectral type stars. Among them, Vega and Fomalhaut, two of the prototypes of the beta Pic type stars. Since this association includes several late spectral type stars, we used their properties to estimate their age and, therefore, the age of the group and that of Vega and Fomalhaut. Our estimate for that age is 200$\\pm$100 Myr.

  9. Secure and documented screwing down of Castor containers

    International Nuclear Information System (INIS)

    The castor container is sealed using a multiple lid system comprising a primary lid and a secondary lid. The two lids are positioned one above the other and screwed securely to the body of the container. In addition, the tightness of the lids is guaranteed by a special metal seal. A further steel plate is screwed securely over the lids providing additional protection for the lids from moisture and various influences. The central element connecting the lids to the container comprises fixed threaded connections which must be accurately tightened with a torque of 900 Nm, 1500 Nm or more. The basic function of a threaded connection, in terms of a positive fit and detachable joint, is to join together two or more parts in such a way that they always behave as a single part whatever operational forces are present. This can only be achieved by means of an accurate and sufficient pre-tensioning force. This pretensioning force is transferred to the threaded connection with the help of a particular torque and presses the components together. This loading brought about by the pretensioning force is referred to as the prestress. In order to create a correct and high quality connection, this prestress must be arrived at in an optimum manner. The prestress must therefore be high enough to withstand the full loading for which the connection is designed. In addition the connection should not come loose unintentionally if it is exposed to externally acting forces. Since under no circumstances should threaded connections on a castor container fail, a suitable screwing process must guarantee that this does not happen. The securing of threaded joints can only be ensured by introducing and maintaining a constant and accurate prestress. VDI Guideline 2230, Part 1, mentions various threaded connection or tightening processes, including torque-controlled tightening, angle-controlled tightening and yield-controlled tightening. (orig.)

  10. Some properties of castor oil affecting its performance as a capacitor impregnant and their significance to future impregnant research

    International Nuclear Information System (INIS)

    For a considerable time castor oil and polychlorinated biphenyl (PCB) have been the principal impregnants used in energy-storage capacitors. Castor oil has proven to be better than PCB for pulsed applications. PCB's have come under attack as an environmental hazard, while castor oil is a vegetable product and its supply and quality are subject to fluctuation. These two facts make the development of new impregnants desirable. The properties of PCB as a capacitor impregnant are well known. This paper first compares a number of properties of castor oil and PCB's. A comparison is made between the lives of castor oil capacitors and comparable PCB energy-storage capacitors. Some of the physical and chemical properties of castor oil which make it a good pulse capacitor impregnant are examined. These properties can be used as a guide for future research on new pulse capacitor impregnants

  11. Expression of Castor LPAT2 Enhances Ricinoleic Acid Content at the sn-2 Position of Triacylglycerols in Lesquerella Seed

    OpenAIRE

    Grace Q. Chen; Harrie van Erp; Jose Martin-Moreno; Kumiko Johnson; Eva Morales; John Browse; Peter J. Eastmond; Jiann-Tsyh Lin

    2016-01-01

    Lesquerella is a potential industrial oilseed crop that makes hydroxy fatty acid (HFA). Unlike castor its seeds are not poisonous but accumulate lesquerolic acid mostly at the sn-1 and sn-3 positions of triacylglycerol (TAG), whereas castor contains ricinoleic acid (18:1OH) at all three positions. To investigate whether lesquerella can be engineered to accumulate HFAs in the sn-2 position, multiple transgenic lines were made that express castor lysophosphatidic acid acyltransferase 2 (RcLPAT2...

  12. Evaluation of the performance of a castor-oil based formulation in limiting pesticide residues in strawberry crops

    OpenAIRE

    Mário Sérgio Galhiane; Sandra Regina Rissato; Lucídio de Sousa Santos; Gilberto Orivaldo Chierice; Marcos Vinícius de Almeida; Terezinha Fumis; Inês Chechim; Aloísio Costa Sampaio

    2012-01-01

    A study was made to evaluate the effect of a castor oil-based detergent on strawberry crops treated with different classes of pesticides, namely deltamethrin, folpet, tebuconazole, abamectin and mancozeb, in a controlled environment. Experimental crops of greenhouse strawberries were cultivated in five different ways with control groups using pesticides and castor oil-based detergent. The results showed that the group 2, which was treated with castor oil-based detergent, presented the lowest ...

  13. Surface Coating Studies of Polyurethane Derived from [(Alkyd-(Epoxy Resin Treated Castor Oil] Using Isophorene Diisocynate - II

    Directory of Open Access Journals (Sweden)

    Dinesh. P. Patel

    2012-07-01

    Full Text Available Castor oil (C was reacted with profitable epoxy resin (E (diglycidylether of bisphenol-A, DGEBF at a range of mole ratios. The consequential products (Castor oil- Epoxy resin were nominated as CEs. Isocyanate terminated castor oil Polyurethane (ICOPU was prepared by reaction of castor oil and various proportion of Isophoren diisocyanate. A commercial alkyd resin was blended with various proportions of CEs and ICOPU. A unique solvent system, which shows a one – phase clear solution and a clear coat of binder system, was used. All the blends were applied on mild steel panels and characterized for drying time, adhesion, flexibility, hardness, impact resistance and chemical resistance properties.

  14. Effects of Process Parameters on the Yield of oil from Castor Seed

    Directory of Open Access Journals (Sweden)

    Mbah, G.O

    2016-08-01

    Full Text Available The physicochemical properties of castor seed oil were evaluated in this work using standard analytical technique. The results showed the percentage (% moisture, crude lipid, crude protein, ash and carbohydrate contents of the castor seed as 0.700, 48.800, 7.200, 10.600, 31.615 respectively. The oil from the castor seed was odourless and yellowish at room temperature (30℃. The treatment combinations used (leaching time, leaching temperature and solvent: solute ratio showed significant differences (p< 0.05 in yield of castor oil seed flour with % oil yield of 35.52 – 53.90%. Lipid indices of the castor seed oil indicated the acid value (AV as 1.100mg NaOH/g of oil, free fatty acid (FFA as 0.550%, saponification value (SV as 188.300mgkOH/g of oil, iodine value (IV as 74.700I2/g of oil, peroxide value as 1.500ml/g of oil, and viscosity as 0.008. A standard statistical package Minitab version 16.0 program was used in the regression analysis and analysis of variance (ANOVA. The statistical software mentioned above was also used to generate various plots such as single effect, interaction plot, contour plot and 3D surface plot. The response or yield of oil extracted from castor flour was used to develop a mathematical model that correlates the yield of oil. The optimum condition obtained to give the highest yield of castor oil extraction are leaching time of 2hrs, leaching temperature of 50℃ and solute: solvent ratio of 0.05g/ml.

  15. Identification of diacylglycerol and triacylglycerols containing 11,12,13-trihydroxy-9,14-octadecadienoic acid in castor oil by mass spectrometry

    Science.gov (United States)

    Castor oil has many industrial uses. Molecular species of acylglycerols containing monohydroxy, dihydroxy and trihydroxy fatty acids in castor oil have been reported. The identification of acylglycerols containing a triOH18:2 fatty acid in castor oil is reported here. The structure of this novel fat...

  16. Identification of acylglycerols containing dihydroxy fatty acids in castor (Ricinus communis L.)oil by mass spectrometry

    Science.gov (United States)

    Ricinoleate, a monohydroxy fatty acid, in castor oil has many industrial uses. Dihydroxy fatty acids can also be used in industry. The C18 HPLC fractions of castor oil were used for mass spectrometry to identify the acylglycerols containing dihydroxy fatty acids. Four diacylglycerols identified were...

  17. The castor oil production in Brazil and the biodiesel program (Probiodiesel); A producao de mamona no Brasil e o Probiodiesel

    Energy Technology Data Exchange (ETDEWEB)

    Almeida, Cezar Menezes; Almeida Neto, Jose Adolfo de; Pires, Monica de Moura [Universidade Estadual de Santa Cruz, Ilheus, BA (Brazil). Grupo Bioenergia e Meio Ambiente]. E-mails: biocomb@uesc.br; Rocha, Pauletti Karllien [Secretaria de Ciencia, Tecnologia e Inovacao do Estado da Bahia (SECTI), Salvador, BA (Brazil)]. E-mail: pauletti@secti.ba.gov.br

    2004-07-01

    The objective of this work is to present a prospective study of the national production of biodiesel and castor oil and to determine the level of the public investment necessary to attain the proposed production. For replacement of 2% of the diesel internal consumption, 786 millions of liters of biodiesel will be necessary, based on the consumption of 2003. From this amount 293 millions of liters (40%) will be derived from the castor oil. Considering the castor oil agricultural productivity of 1.8 t/ha and the 45% industrial income in oil, it will be necessary the planting of 360.000 ha and investment amount of R$ 370 million. An idleness of 71% of the castor oil crushing industry has been detected, but this sector works with profit as function of castor oil price. An deficit of 55% between the castor oil planting area and the necessary one for biodiesel production was identified, considering that all the castor oil will be exclusively used for this purpose. With the proposed goals and without the necessary allocation of public resources for castor oil production, probably it will not be possible to expect that 1/5 of the biodiesel national production can come from the domestic agricultural planting.

  18. Streamlining CASTOR to manage the LHC data torrent

    International Nuclear Information System (INIS)

    This contribution describes the evolution of the main CERN storage system, CASTOR, as it manages the bulk data stream of the LHC and other CERN experiments, achieving over 90 PB of stored data by the end of LHC Run 1. This evolution was marked by the introduction of policies to optimize the tape sub-system throughput, going towards a cold storage system where data placement is managed by the experiments' production managers. More efficient tape migrations and recalls have been implemented and deployed where bulk meta-data operations greatly reduce the overhead due to small files. A repack facility is now integrated in the system and it has been enhanced in order to automate the repacking of several tens of petabytes, required in 2014 in order to prepare for the next LHC run. Finally the scheduling system has been evolved to integrate the internal monitoring. To efficiently manage the service a solid monitoring infrastructure is required, able to analyze the logs produced by the different components (about 1 kHz of log messages). A new system has been developed and deployed, which uses a transport messaging layer provided by the CERN-IT Agile Infrastructure and exploits technologies including Hadoop and HBase. This enables efficient data mining by making use of MapReduce techniques, and real-time data aggregation and visualization. The outlook for the future is also presented. Directions and possible evolution will be discussed in view of the restart of data taking activities.

  19. Streamlining CASTOR to manage the LHC data torrent

    Science.gov (United States)

    Lo Presti, G.; Espinal Curull, X.; Cano, E.; Fiorini, B.; Ieri, A.; Murray, S.; Ponce, S.; Sindrilaru, E.

    2014-06-01

    This contribution describes the evolution of the main CERN storage system, CASTOR, as it manages the bulk data stream of the LHC and other CERN experiments, achieving over 90 PB of stored data by the end of LHC Run 1. This evolution was marked by the introduction of policies to optimize the tape sub-system throughput, going towards a cold storage system where data placement is managed by the experiments' production managers. More efficient tape migrations and recalls have been implemented and deployed where bulk meta-data operations greatly reduce the overhead due to small files. A repack facility is now integrated in the system and it has been enhanced in order to automate the repacking of several tens of petabytes, required in 2014 in order to prepare for the next LHC run. Finally the scheduling system has been evolved to integrate the internal monitoring. To efficiently manage the service a solid monitoring infrastructure is required, able to analyze the logs produced by the different components (about 1 kHz of log messages). A new system has been developed and deployed, which uses a transport messaging layer provided by the CERN-IT Agile Infrastructure and exploits technologies including Hadoop and HBase. This enables efficient data mining by making use of MapReduce techniques, and real-time data aggregation and visualization. The outlook for the future is also presented. Directions and possible evolution will be discussed in view of the restart of data taking activities.

  20. Morphology and viability of castor bean genotypes pollen grains

    Directory of Open Access Journals (Sweden)

    Maria Selma Alves Silva Diamantino

    2016-01-01

    Full Text Available The objective of this work was to characterize the morphology and viability of the pollen of 15 genotypes of castor bean (Ricinus communis L. and to generate information that can assist in the selection of highly promising male parents for future use in genetic improvement programs aimed at producing seeds for oil extraction. Acetolysis and scanning electron microscopy was used to characterize the morphology of the pollen. The viability of the pollen grains was estimated by in vitro germination and colorimetric analysis (acetocarmine 2% and 2, 3, 5-triphenyltetrazolium chloride 1%. For the in vitro germination, pollen grains were grown in 10 types of solidified culture medium consisting of different concentrations of sucrose, boric acid, calcium nitrate, magnesium sulfate and potassium nitrate. The pollen grains had the following characteristics: medium size, isopolar and subspheroidal shape, radial symmetry, circular ambit, 3-colporate, elongated endoapertures, tectate exine and granulated sexine. The acetocarmine dye overestimated pollen viability. The media M5 and M8 were the most efficient at promoting the germination of pollen grains. The studied genotypes had high levels of viability and can therefore be used as male parents in genetic improvement programs.

  1. Impact of an exploding LPG rail tank car onto a CASTOR spent fuel cask

    International Nuclear Information System (INIS)

    On 27 April 1999 a fire test was performed with a 45 m3 rail tank car partially filled with 10 m3 pressurised liquid propane. A CASTOR THTR/AVR spent fuel transport cask was positioned beside the propane tank as to suffer maximum damage from any explosion. About 17 min after fire ignition the propane tank ruptured. This resulted in a BLEVE with an expanding fireball, heat radiation, explosion overpressure, and tank fragments projected towards the cask. This imposed severe mechanical and thermal impacts directly onto the CASTOR cask, moving it 17 m from its original position. This involved rotation of the cask with the lid end travelling 10 m before it crashed into the ground. Post-test investigations of the CASTOR cask demonstrated that no loss of leaktightness or containment and shielding integrity occurred. (author)

  2. Study on Emission and Performance of Diesel Engine Using Castor Biodiesel

    Directory of Open Access Journals (Sweden)

    Md. Saiful Islam

    2014-01-01

    performance of diesel engine using the castor biodiesel and its blend with diesel from 0% to 40% by volume. The acid-based catalyzed transesterification system was used to produce castor biodiesel and the highest yield of 82.5% was obtained under the optimized condition. The FTIR spectrum of castor biodiesel indicates the presence of C=O and C–O functional groups, which is due to the ester compound in biodiesel. The smoke emission test revealed that B40 (biodiesel blend with 40% biodiesel and 60% diesel had the least black smoke compared to the conventional diesel. Diesel engine performance test indicated that the specific fuel consumption of biodiesel blend was increased sufficiently when the blending ratio was optimized. Thus, the reduction in exhaust emissions and reduction in brake-specific fuel consumption made the blends of caster seed oil (B20 a suitable alternative fuel for diesel and could help in controlling air pollution.

  3. Production of Castor Culture in Depending to Fertilization With Bed Chicken

    Directory of Open Access Journals (Sweden)

    Maria Ednalva Cavalcanti de Oliveira

    2010-04-01

    Full Text Available Fertilization of crops with organic products, where the content organic matter in soil is low, it is viable alternatives for increasing crop productivity and improvement of the physical, chemical and biological conditions of soil. The experiment was conducted in a randomized block design with five treatments (0, 3, 6, 9, 12 and 15 t / ha of chicken bed and four replications. The chicken bed had a positive influence on the length of the bunch of castor, the number of fruit per bunch, the average weight of bunch, the 100 grain weight and grain yield. The highest yield of castor was 1131 kg ha-1, obtained with 11,53 t ha-1 of cattle manure. Addition of 11,53 t ha-1 of cattle manure increased the grain yield of castor at 580 kg ha-1, equivalent to 51,28% more.

  4. STUDY ON CASTOR OIL POLYURETHANE/POLY (METHYL METHACRYLATE) AB CROSSLINKED POLYMERS

    Institute of Scientific and Technical Information of China (English)

    DU Ying; HAN Xiaozu; LIU Wenzhong

    1991-01-01

    Castor oil polyurethane/poly(methyl methacrylate) AB crosslinked polymers (ABCP) were synthesized by free radical copolymerization of MMA and vinyl-terminated castor oil polyurethane which was obtained from isocyanate-terminated castor oil polyurethane and hydroxyethyl methacrylate.The mechanical properties, transition and relaxation, as well as compatibility and morphology of the ABCP were investigated by changing the component. The results show that the ABCP is a semicompatible system and the compatibility of the two components decreases with increasing content of the hard segment. The mechanical and damping properties of the ABCP are obviously superior to that of their homopolymers. The damping value is mainly controlled by crosslink density of the ABCP but the Tg value by component.

  5. Small x physics and multiple interactions with the forward calorimeter Castor in the CMS experiment

    Energy Technology Data Exchange (ETDEWEB)

    Knutsson, Albert; Behrens, Ulf; Borras, Kerstin; Campbell, Alan; Goettlicher, Peter; Jung, Hannes; Katkov, Igor; Rurikova, Zuzana [Deutsches Elektronen-Synchrotron, Hamburg (Germany)

    2008-07-01

    The Large Hadron Collider at CERN will give excellent possibilities to improve our understanding of QCD phenomena. The presentation concentrates on small x physics expected to be accessible with the forward calorimeter CASTOR in the CMS experiment. Studies of forward jet production, as well as studies on multiple interactions will be presented. This physics is studied in order to understand the dynamics of the strong force. The gained knowledge can be used to reduce the QCD background and to minimize uncertainties in more discovery oriented measurements. In the study of forward jets, sensitivity to parton dynamics beyond DGLAP are seen for 3-jet events with a forward jet in the CASTOR region and a di-jet pair in the main CMS detector. In the multiple interaction study it is shown that different scenarios can be distinguished by looking at the long range correlation between the energy deposit in CASTOR and the particle multiplicity in the main detector.

  6. Thermophysical properties of biodiesel and related systems: (Liquid + liquid) equilibrium data for castor oil biodiesel

    International Nuclear Information System (INIS)

    Highlights: ► (Liquid + liquid) equilibrium data for multicomponent castor oil FAME and FAEE castor oil. ► Tie-lines and solubility curves (binodal) by cloud-point method for FAME and FAEE systems. ► Experimental data correlated using the UNIQUAC model. -- Abstract: This work reports new liquid–liquid solubility values (binodal curves) as well as (liquid + liquid) equilibrium data for, ternary and quaternary systems containing fatty acid methyl esters (FAME) and fatty acid ethyl esters (FAEE) from castor oil, water, glycerol, methanol and anhydrous ethanol at T = (303.15, 318.15, and 333.15) K. Solubility curves (binodal) were also obtained by the cloud-point method for binary systems containing FAME, FAEE, water, or glycerol. All results obtained can be considered of good quality. The experimental values were correlated using the UNIQUAC model, whose results presented good performance and satisfactory fitting of equilibrium values

  7. Castor oil biodiesel: an economic evaluation; Biodiesel de mamona: uma avaliacao economica

    Energy Technology Data Exchange (ETDEWEB)

    Pires, Monica de Moura; Alves, Jaenes Miranda; Almeida Neto, Jose Adolfo de; Almeida, Cezar Menezes; Sousa, Geovania Silva de; Cruz, Rosenira Serpa da; Monteiro, Renata; Lopes, Beatriz Sampaio; Robra, Sabine [Universidade Estadual de Santa Cruz, Ilheus, BA (Brazil). Grupo Bioenergia e Meio Ambiente]. E-mails: mpires@uesc.br; jaenes@uesc.br; jalmeida@uesc.br; roserpa@uesc.br

    2004-07-01

    The production cost of castor oil biodiesel by methyl way and its economic viability, using as reference the production cost data of castor oil and the implantation of the pilot plant at UESC - state university of Santa Cruz, Bahia State, Brazil was determined. From this information, it was seen that the estimated price of castor oil biodiesel is close to the diesel price in the Itabuna market, Bahia state, Brazil. The indicators show economic viability of the mini-power plant installation. Such information are preliminary estimative for the market and can be modified as function of changes in the main factors used to have the production costs, as well as the sectorial policies that drives the activity as much in levels of raw material production as in biodiesel.

  8. Use of castor oil-based polyurethane adhesive in the production of glued laminated timber beams

    Directory of Open Access Journals (Sweden)

    Maximiliano dos Anjos Azambuja

    2006-09-01

    Full Text Available Researchers from the Polymer Technology and Analytical Chemistry (LQATP group at the São Carlos Institute of Chemistry, University of São Paulo, developed a polyurethane adhesive based on castor oil. In addition to deriving it from a renewable source, this adhesive is nonaggressive to humans and the environment. The purpose of this study is to investigate the feasible use of polyurethane adhesive based on castor oil in the production of 12 beams of Glulam, using the species Pinus caribea hondurensis and Eucaliptus grandis. The structural performance of the beams of Glulam was evaluated through static bending tests. The results obtained enabled to conclude good efficiency of the polyurethane adhesive based on castor oil, for use in Glulam.

  9. Simultaneous allergen inactivation and detoxification of castor bean cake by treatment with calcium compounds

    OpenAIRE

    K.V. Fernandes; Deus-de-Oliveira, N.; Godoy, M.G.; Z.A.S. Guimarães; V.V. Nascimento; de Melo, E.J.T.; Freire, D. M.G.; M. Dansa-Petretski; O.L.T. Machado

    2012-01-01

    Ricinus communis L. is of great economic importance due to the oil extracted from its seeds. Castor oil has been used for pharmaceutical and industrial applications, as a lubricant or coating agent, as a component of plastic products, as a fungicide or in the synthesis of biodiesel fuels. After oil extraction, a castor cake with a large amount of protein is obtained. However, this by-product cannot be used as animal feed due to the presence of toxic (ricin) and allergenic (2S albumin) protein...

  10. Synthesis and characterization of castor oil based polyurethane–polyacrylonitrile interpenetrating polymer networks

    Indian Academy of Sciences (India)

    P Mallu; Siddaramaiah; R Somashekar

    2000-10-01

    A series of interpenetrating polymer networks (IPNs) of castor oil based polyurethane/polyacrylonitrile (PU/PAN: 80/20, 60/40, 50/50, 40/60 and 20/80) were synthesized by condensation reaction of castor oil with methylene diisocyanate and acrylonitrile, employing benzoyl peroxide (BPO) and ethylene glycol dimethylacrylate (EGDM) as initiator and crosslinkers respectively. The physical, chemical, optical and some of the mechanical properties of PU/PAN were studied. Phase stabilization in IPNs was investigated by wide angle X-ray (WAXS) profile analysis. Variation of crystal size distribution was studied in these polymer networks.

  11. Inhibitors of nitric oxide synthetase prevent castor-oil-induced diarrhoea in the rat.

    OpenAIRE

    Mascolo, N; Izzo, A A; Barbato, F.; Capasso, F

    1993-01-01

    1. Castor oil (2 ml orally) produced copious diarrhoea in rats 3 h after its administration. 2. Pretreatment (intraperitoneal, i.p.) of rats with the NO synthesis inhibitors NG-nitro-L-arginine methyl ester (L-NAME, 1-25 mg kg-1) and NG-monomethyl-L-arginine (L-NMMA, 2.5-100 mg kg-1) inhibited or prevented castor-oil-induced diarrhoea. L-Arginine (150-600 mg kg-1, i.p.) administered to rats pretreated with L-NAME 10 mg kg-1, drastically reduced the antidiarrhoeal activity of L-NAME in a dose-...

  12. EVALUATION OF OIL CONTENT AND SEED WEIGHT IN CASTOR USING VARIOUS APPROACHES

    OpenAIRE

    Edinete Maria Oliveira

    2011-01-01

    The objective with this work to analyze the oil tenor and weight of several accesses of castor oil plant seeds for ends of genetic improvement, planted in different years. The analyses were accomplished at Embrapa Algodão Laboratory Multidisciplinary in Campina Grande -PB. 143 samples of castor oil plant seeds were used, coming of the city of Lagoa Seca - PB in 1998, 1999 and 2000, planted according to design random blocks. Initially the seeds were removed of the cold camera and made sampling...

  13. Pattern of genetic diversity among Fusarium wilt resistant castor germplasm accessions (Ricinus communis L.

    Directory of Open Access Journals (Sweden)

    K. Anjani

    2010-03-01

    Full Text Available Wilt caused by Fusarium oxysporum f.sp. ricini (Wr Gordon is one of the major yield losing diseases in castor.Cultivating wilt resistant cultivars is an effective strategy to control the disease. Utilization of diverse sources ofstable resistance is a prerequisite for durable resistance breeding. The experiment was conducted to identifygenetically diverse resistant sources in castor germplasm. Genetic diversity among 20 identified wilt resistantgermplasm was assessed using multivariate classificatory methods. Wide genetic diversity was demonstratedamong these accessions. These accessions are valuable in wilt resistance breeding programme. They wouldserve as base diverse material for wilt resistance breeding, wilt resistant genepool construction and moleculartagging of resistant genes.

  14. Joint Experiments on the Tokamaks CASTOR and T-10

    International Nuclear Information System (INIS)

    Small tokamaks may significantly contribute to the better understanding of phenomena in a wide range of fields such as plasma confiement and energy transport; plasma stability in different magnetic configurations; plasma turbulence and its impact on local and global plasma parameters; processes at the plasma edge and plasma-wall interaction; scenarios of additional heating and non-inductive current drive; new methods of plasma profile and parameter control; development of novel plasma diagnostics; benchmarking of new numerical codes and so on. Furthermore, due to the compactness, flexibility, low operation costs and high skill of their personnel small tokamaks are very convenient to develop and test new materials and technologies. Small tokamaks are suitable and important for broad international cooperation, providing the necessary environment and manpower to conduct dedicated joint research programmes. In addition, the experimental work on small tokamaks is very appropriate for the education of students, scientific activities of post-graduate students and for the training of personnel for large tokamaks. The first Joint (Host Laboratory) Experiment (JE1) has been carried out in 2005 on the CASTOR tokamak at the IPP Prague, Czech Republic. It was jointly organized by the IPP-ASCR and KFKI HAC, Budapest, involved 20 scientists from 7 countries and was supported through the IAEA and the ICTP, Trieste. The objective of JE1 was to perform studies of plasma edge turbulence and plasma confinement. Following the success of JE1, JE2 has been performed on T-10 at RRC 'Kurchatov Institute' in Moscow; 30 scientists from 13 countries participated in this experiment. This experiment aimed to continue JE1 turbulence studies, now extending them to the plasma core. Results of JE1 and JE2 will be overviewed and compared

  15. Production of bran castor biochar through slow pyrolysis

    Science.gov (United States)

    Pissinati de Rezende, E. I.; Mangrich, A. S.; Batista, M. G. F.; Toledo, J. M. S.; Novotny, E. H.

    2012-04-01

    Pyrolysis is a thermal process of great importance in the present context, since it constitutes a significant alternative to adequate use of organic waste. The principal products obtained in the pyrolysis of discarded biomass are bio-oil, biogas and biochar. Biochar, in turn, may play a relevant role when applied to the soil to sequester carbon and as a soil conditioner, a material comparable to organic matter of Indians Black Earths from the Amazon Region [1]. Seeking to determine the best methods of preparation of biochar, we studied the pyrolysis of bran castor residue of the Brazilian biodiesel industry. Eight samples, from FM1 to FM8, were prepared in a factorial design 23 using two temperature (300 and 350 °C), two heating velocity (5 and 10 °C min-1) and two period of heating (30 and 60 min). The eight samples were studied using the spectroscopy: EPR, FTIR, RMN, XPS, and elemental analysis. By elemental analysis, the samples that keep for lower temperature of pyrolysis, 300 °C, showed H/C and N/C ratios greater than the samples of 350 °C. That higher value can be attributed to chemical structure more aliphatic than aromatic mainly in the FM7 sample (V = 10 °C min-1, T = 300 °C, P = 30 min). The greater N/C ratio correlated with a superior amount of nitrogenous functions, presenting by both FM7 and FM4 samples, as determined by 13C NMR spectroscopy with absorptions in 175 ppm (amide) and 55 ppm (N-alkyl).

  16. 蓖麻饼粕的脱毒及综合开发利用%The Detoxification and Comprehensive Development and Utilization of Castor Bean Meal

    Institute of Scientific and Technical Information of China (English)

    张树军; 狄建军; 白靓; 黄凤兰; 穆莎茉莉; 魏永春; 张国文

    2011-01-01

    Castor bean meal is a by-product after oil extraction,it contains rich protein and amino acids castor bean hulls and a spot of castor toxins,has a high utilization value.This paper reviewes the detoxification of castor bean meal,the development and utilization of proteins in detoxificated castor bean meal,castor toxins and castor bean hull.%蓖麻饼粕是蓖麻籽榨油后的副产品,含有丰富的蛋白和氨基酸、蓖麻壳及少量的蓖麻毒素,具有较高的综合利用价值.本文综述了蓖麻饼的脱毒,脱毒蓖麻饼蛋白质、蓖麻饼中毒素及蓖麻壳的开发利用.

  17. Organic matter and soil water content influence on BRS 188 castor bean growth

    Energy Technology Data Exchange (ETDEWEB)

    Lacerda, Rogerio Dantas de; Araujo, Ester Luiz de; Nascimento, Elka Costa Santos; Barros Junior, Genival [Universidade Federal de Campina Grande (UFCG), PB (Brazil); Guerra, Hugo O. Carvallo; Chaves, Lucia Helena G. [Universidade Federal de Campina Grande (UAEAg/UFCG), PB (Brazil). Unidade Academica de Engenharia Agricola

    2008-07-01

    The castor bean culture has been highlighted due to the several applications of its oil, which constitutes one of the best row materials for biodiesel manufacturing, and the base for several other industrial products. The objective of the present work was to study the effect of different soil water and soil organic matter on the castor bean growth. The experiment was conducted from April to August 2006 under greenhouse conditions using a randomized block 2x4 factorial design with two soil organic mater content (5.0 g.kg{sup -1} e 25.0 g.kg{sup -1}), four levels of available water (100, 90, 80 e 70% ) and three replicates. For this, 24 plastic containers, 75 kg capacity, were used on which was grown one plant 120 days after the seedling. At regular intervals the plant height was measured and the results analyzed statistically. For the qualitative treatments (with and without organic matter) the treatment means were compared through the Tukey test. For the quantitative ones (water levels) were used regressions. The castor bean cultivar height was significantly influenced by the organic matter content only after 80 days. Castor bean height increased significantly with the soil water content after 40 days of growing. (author)

  18. Lipase catalyzed transesterification of castor oil by straight chain higher alcohols.

    Science.gov (United States)

    Malhotra, Deepika; Mukherjee, Joyeeta; Gupta, Munishwar N

    2015-03-01

    Biolubricants from Castor oil were produced enzymatically by transesterification with higher alcohols using a lipase mixture of immobilized Mucor miehei (RMIM) and immobilized Candida antarctica lipase B (Novozym 435) under low water conditions. The conversions were in the range of 80-95% under the optimized conditions. PMID:25204793

  19. Coherent structures in the plasma edge turbulence of the RFX and CASTOR experiments

    Czech Academy of Sciences Publication Activity Database

    Martines, E.; Antoni, V.; Cavazzana, R.; Regnoli, G.; Serianni, G.; Hron, Martin; Stöckel, Jan

    2002-01-01

    Roč. 52, supplement D (2002), s. D13-D24. ISSN 0011-4626. [Symposium on Plasma Physics and Technology/20th./. Prague, 10.06.2002-13.06.2002] Institutional research plan: CEZ:AV0Z2043910 Keywords : CASTOR, coherent structures, plasma edge turbulence Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 0.311, year: 2002

  20. REGIOSPECIFIC ANALYSIS OF DIRICINOLEOYL-ACYL-GLYCEROL IN CASTOR OIL USING ELECTROSPRAY IONIZATION-MASS SPECTROMETRY

    Science.gov (United States)

    HPLC fractions of castor oil were used to identify the regiospecific location of non-hydroxyl fatty acids on glycerol backbone in diricinoleoyl-acyl-glycerols using electrospray ionization MS3 of lithium adducts. The regiospecific ions in MS3 spectra were from the loss of 'a,B'-unsaturated fatty aci...

  1. Impact of castor meal on root-knot and free-living nematodes

    Directory of Open Access Journals (Sweden)

    Cecilia Helena Silvino Prata Ritzinger

    2014-08-01

    Full Text Available Soil amendment may enhance soil quality as well as reduce plant-parasitic nematode. Despite the many applications already undertaken using castor meal, its efficiency in controlling root-knot nematodes (RKN, Meloidogyne incognita when applied to melon (Cucumis melo is still not clear. Three different amounts of castor meal (Ricinus communis applied were evaluated in microplots planted with melon either with or without RKN. The impact of castor meal on soil free-living nematode communities was also determined. Total nematode genera richness was estimated as 37 for the entire set of microplots sampled across both sampling dates. Rarefaction analysis resulted in 12 collector's curves out of the total of 30 that reached the horizontal asymptote. Univariate ANOVA with two factors yielded differences (p < 0.05 only with regard to the time factor. Simpson, Shannon, Evenness and Equitability indices showed a trend toward moderate increases by the end of the experiment, while the other indices were higher for tomato in pre-transplant sampling compared to harvest. Nematode community and diversity changed during the course of the experiment, although there was substantial confounding heterogeneity within and between the factorial combinations from the beginning. Root knot population was not reduced by the castor meal but increased throughout the period, regardless of treatment. RKN reduced melon yield, number and weight of melon.

  2. Recycling of waste poly(ethylene terephthalate) with castor oil using microwave heating

    Czech Academy of Sciences Publication Activity Database

    Beneš, Hynek; Slabá, J.; Walterová, Zuzana; Rais, David

    2013-01-01

    Roč. 98, č. 11 (2013), s. 2232-2243. ISSN 0141-3910 R&D Projects: GA MPO 2A-2TP1/135 Institutional support: RVO:61389013 Keywords : poly(ethylene terephthalate) * castor oil * chemical recycling Subject RIV: CD - Macromolecular Chemistry Impact factor: 2.633, year: 2013

  3. Characterization and Utilization of castor bean seed oil extract for production of medicated soap.

    Directory of Open Access Journals (Sweden)

    Abdulrasheed A

    2015-12-01

    Full Text Available The research work is to investigate the potential utilization of castor bean seed oil extract in the production of medicated soap. The oil was extracted via soxhlet extractor using hexane as solvent. The characterization analysis reveals the acid value and saponification value of the oil which were between the ranges of values specified by ASTM. The soap produced gave a pH of (8.9, foam height (16cm, alcohol insoluble (3.45%, moisture content (4.2% and free acidity of (0.10. The antibacterial activity of soap produced from castor oil on bacteria isolate (Staphylococcus Aureus was promising with an inhibition zone of 15.5mm but at dilutions of 10-1 , 10-2 and 10-3 , were found to be 11.5mm, 9.5mm and 6mm respectively. This shows that as concentration decreases, the sensitivity of the soap to the bacteria isolate also decreases. The sensitivity of the medicated soap to the bacteria isolate is as a result of the presence of ricinoleic acid present in large proportion in the fatty acid composition of castor oil. It can be concluded that a highly effective soap can be produced from castor bean seed oil extract.

  4. Film-forming properties of castor oil polyol ester blends in elastohydrodynamic conditions

    Science.gov (United States)

    The viscosities and elastohydrodynamic (EHD) film thickness properties of binary blends of castor oil with polyol esters were determined experimentally. Predicted blend viscosity was calculated from the viscosity of the pure blend components. Measured viscosity values were closer to the values pre...

  5. Differential Contribution of Malic Enzymes during Soybean and Castor Seeds Maturation.

    Directory of Open Access Journals (Sweden)

    Mariel Claudia Gerrard Wheeler

    Full Text Available Malic enzymes (ME catalyze the decarboxylation of malate generating pyruvate, CO2 and NADH or NADPH. In some organisms it has been established that ME is involved in lipids biosynthesis supplying carbon skeletons and reducing power. In this work we studied the MEs of soybean and castor, metabolically different oilseeds. The comparison of enzymatic activities, transcript profiles and organic acid contents suggest different metabolic strategies operating in soybean embryo and castor endosperm in order to generate precursors for lipid biosynthesis. In castor, the malate accumulation pattern agrees with a central role of this metabolite in the provision of carbon to plastids, where the biosynthesis of fatty acids occurs. In this regard, the genome of castor possesses a single gene encoding a putative plastidic NADP-ME, whose expression level is high when lipid deposition is active. On the other hand, NAD-ME showed an important contribution to the maturation of soybean embryos, perhaps driving the carbon relocation from mitochondria to plastids to support the fatty acids synthesis in the last stages of seed filling. These findings provide new insights into intermediary metabolism in oilseeds and provide new biotechnological targets to improve oil yields.

  6. Simultaneous allergen inactivation and detoxification of castor bean cake by treatment with calcium compounds

    International Nuclear Information System (INIS)

    Ricinus communis L. is of great economic importance due to the oil extracted from its seeds. Castor oil has been used for pharmaceutical and industrial applications, as a lubricant or coating agent, as a component of plastic products, as a fungicide or in the synthesis of biodiesel fuels. After oil extraction, a castor cake with a large amount of protein is obtained. However, this by-product cannot be used as animal feed due to the presence of toxic (ricin) and allergenic (2S albumin) proteins. Here, we propose two processes for detoxification and allergen inactivation of the castor cake. In addition, we establish a biological test to detect ricin and validate these detoxification processes. In this test, Vero cells were treated with ricin, and cell death was assessed by cell counting and measurement of lactate dehydrogenase activity. The limit of detection of the Vero cell assay was 10 ng/mL using a concentration of 1.6 × 105 cells/well. Solid-state fermentation (SSF) and treatment with calcium compounds were used as cake detoxification processes. For SSF, Aspergillus niger was grown using a castor cake as a substrate, and this cake was analyzed after 24, 48, 72, and 96 h of SSF. Ricin was eliminated after 24 h of SSF treatment. The cake was treated with 4 or 8% Ca(OH)2 or CaO, and both the toxicity and the allergenic properties were entirely abolished. A by-product free of toxicity and allergens was obtained

  7. Regiospecific analysis of diricinoleoylacylglycerols in castor (Ricinus communis L.) oil by electrospray ionization-mass spectrometry

    Science.gov (United States)

    HPLC fractions of diricinoleoyl-acyl-glycerols containing one non-ricinoleoyl chain from castor oil were used to identify the regiospecific location of this non-ricinoleoyl chain on glycerol backbone using electrospray ionization-MS3 of lithium adducts. The regiospecific ions used were from the loss...

  8. Synthesis and properties of radiation modified thermally cured castor oil based polyurethanes

    Science.gov (United States)

    Mortley, Aba; Bonin, H. W.; Bui, V. T.

    2007-12-01

    Thermally cured polyurethanes were prepared from castor oil and hexamethylene diisocyanate (HMDI). Due to the long aliphatic chain of the castor oil component of polyurethane, thermal curing of castor oil based polyurethane (COPU) is limited by increasing polymer viscosity. To enhance further crosslinking, COPUs were exposed to doses up to 3.0 MGy produced by the mixed ionizing radiation field of a SLOWPOKE-2 research nuclear reactor. The physico-mechanical properties of castor oil based polyurethanes (COPU), unirradiated and irradiated, were characterized by mechanical tensile tests. A four-fold increase in modulus and tensile strength values from 0.930 to 4.365 MPa and 0.149 to 0.747 MPa, respectively, suggests improved physico-mechanical properties resulting from radiation. The changing areas of the carbonyl and the NH absorbance peaks and the disappearance of the isocyanate peak in the FTIR spectra as radiation progressed, indicates increased hydrogen bonding and intermolecular crosslinking, which is in agreement with the mechanical tests. Unchanging 13C solid state NMR spectra imply limited sample degradation with increasing radiation.

  9. Synthesis and properties of radiation modified thermally cured castor oil based polyurethanes

    International Nuclear Information System (INIS)

    Thermally cured polyurethanes were prepared from castor oil and hexamethylene diisocyanate (HMDI). Due to the long aliphatic chain of the castor oil component of polyurethane, thermal curing of castor oil based polyurethane (COPU) is limited by increasing polymer viscosity. To enhance further crosslinking, COPUs were exposed to doses up to 3.0 MGy produced by the mixed ionizing radiation field of a SLOWPOKE-2 research nuclear reactor. The physico-mechanical properties of castor oil based polyurethanes (COPU), unirradiated and irradiated, were characterized by mechanical tensile tests. A four-fold increase in modulus and tensile strength values from 0.930 to 4.365 MPa and 0.149 to 0.747 MPa, respectively, suggests improved physico-mechanical properties resulting from radiation. The changing areas of the carbonyl and the NH absorbance peaks and the disappearance of the isocyanate peak in the FTIR spectra as radiation progressed, indicates increased hydrogen bonding and intermolecular crosslinking, which is in agreement with the mechanical tests. Unchanging 13C solid state NMR spectra imply limited sample degradation with increasing radiation

  10. Measurement of the Fluctuation-Induced Flux with Emissive Probe in the CASTOR Tokamak

    Czech Academy of Sciences Publication Activity Database

    Balan, P.; Adámek, Jiří; Ďuran, Ivan; Hron, Martin; Ionita, C.; Martines, E.; Schrittwieser, R.; Stöckel, Jan; Tichý, M.; Van Oost, G.

    Mulhouse: European Physical Society, 2002 - (Behn, R.; Varandas, C.), s. P-2.072 [EPS Conference on Controlled Fusion and Plasma Physics /29./. Montreux (CH), 17.06.2002-21.06.2002] Institutional research plan: CEZ:AV0Z2043910 Keywords : CASTOR tokamak, electric field Subject RIV: BL - Plasma and Gas Discharge Physics

  11. Differential Contribution of Malic Enzymes during Soybean and Castor Seeds Maturation.

    Science.gov (United States)

    Gerrard Wheeler, Mariel Claudia; Arias, Cintia Lucía; Righini, Silvana; Badia, Mariana Beatriz; Andreo, Carlos Santiago; Drincovich, María Fabiana; Saigo, Mariana

    2016-01-01

    Malic enzymes (ME) catalyze the decarboxylation of malate generating pyruvate, CO2 and NADH or NADPH. In some organisms it has been established that ME is involved in lipids biosynthesis supplying carbon skeletons and reducing power. In this work we studied the MEs of soybean and castor, metabolically different oilseeds. The comparison of enzymatic activities, transcript profiles and organic acid contents suggest different metabolic strategies operating in soybean embryo and castor endosperm in order to generate precursors for lipid biosynthesis. In castor, the malate accumulation pattern agrees with a central role of this metabolite in the provision of carbon to plastids, where the biosynthesis of fatty acids occurs. In this regard, the genome of castor possesses a single gene encoding a putative plastidic NADP-ME, whose expression level is high when lipid deposition is active. On the other hand, NAD-ME showed an important contribution to the maturation of soybean embryos, perhaps driving the carbon relocation from mitochondria to plastids to support the fatty acids synthesis in the last stages of seed filling. These findings provide new insights into intermediary metabolism in oilseeds and provide new biotechnological targets to improve oil yields. PMID:27347875

  12. Sources of nitrogenous fertilizers and their effects in the growth of the castor bean plant

    Directory of Open Access Journals (Sweden)

    Joelma Sales dos Santos

    2008-12-01

    Full Text Available The main goal of this research was to verify and quantify the effects of doses (equivalent to nitrogen of fertilizers, manure from corral, residential sewage sludge, castor oil cake and urea, in the early growth of castor beans, BRS Nordestina in a greenhouse. The experiment was conducted in the Embrapa, at county of Campina Grande, state of Paraiba, Brazil, and it was used an experimental design of randomized with three replicates and 13 treatments, with a factorial 4 x 3 + 1, which factors were: types of organic fertilizers (manure from corral and manure, biosolids and castor bean cake and urea at rates of (85,170 and 255 kg N ha-¹, plus an additional treatment, which was the absolute witness without the fertilization. All the treatments witness received a mineral supplement P and K, at doses of 80 kg of P2O2 and K2O, applied in the foundation, with triple superphosphate and potassium chloride. Among the fertilizers, which further promoted the initial growth of castor beans was the pie of Euphorbia that, in addition to nutrients, especially of nitrogen, have much fiber, more than 35%, constituting themselves, thus a factor in improving soil physical environment.

  13. Treatment of Sebacic Acid Industrial Wastewater by Extraction Process Using Castor Oil Acid as Extractant*

    Institute of Scientific and Technical Information of China (English)

    徐航; 周全; 王金福

    2013-01-01

    Wastewater containing high concentrations of phenol and sodium sulfate is generated in sebacic acid (SA) industry. Castor oil acid, a raw material for producing SA, can be used to extract phenol from wastewater in order to reduce the amount of phenol used in the process and discharge of phenol. The results show that the extrac-tion mechanism is that hydroxyl group of phenol is linked to carboxyl group of castor oil acid by hydrogen bond. The extraction process approaches equilibrium in 30 min. Extraction ratio increases with the increase of sodium sulfate and castor oil acid, and decreases as phenol increases. When the oil-water ratio is 1︰3, the optimal distribu-tion coefficient of 40 is obtained. Phenol saturation concentration in castor oil acid is 1.03 mol·L−1 after extraction for 4 times. The equilibrium constant (Kex) at 25 °C is 8.41 and the endothermic enthalpy (ΔH) is 1.513 kJ·mol−1. The Gibbs free energy (ΔG) is−5.277 kJ·mol−1 and the value ofΔS is calculated to be 22.3 J·mol−1·K−1.

  14. Ratios of regioisomers of triacylglycerols containing dihydroxy fatty acids in castor oil by mass spectrometry

    Science.gov (United States)

    The triacylglycerols (TAG) containing dihydroxy fatty acids have been recently identified by mass spectrometry in castor oil. These new dihydroxy fatty acids were proposed earlier as 11,12-dihydroxy-9-octadecenoic acid (diOH18:1), 11,12-dihydroxy-9,13-octadecadienoic acid (diOH18:2) and 11,12-dihydr...

  15. Regiospecific Quantification of Triacylglycerols Containing Dihydroxy Fatty Acids in Castor Oil by Mass Spectrometry

    Science.gov (United States)

    The triacylglycerols (TAG) containing dihydroxy fatty acids have been recently identified by mass spectrometry in castor oil. These new dihydroxy fatty acids were proposed earlier as 11,12-dihydroxy-9-octadecenoic acid (diOH18:1), 11,12-dihydroxy-9,13-octadecadienoic acid (diOH18:2) and 11,12-dihydr...

  16. Repertoire of SSRs in the Castor Bean Genome and Their Utilization in Genetic Diversity Analysis in Jatropha curcas

    OpenAIRE

    Arti Sharma; Rajinder Singh Chauhan

    2011-01-01

    Castor bean and Jatropha contain seed oil of industrial importance, share taxonomical and biochemical similarities, which can be explored for identifying SSRs in the whole genome sequence of castor bean and utilized in Jatropha curcas. Whole genome analysis of castor bean identified 5,80,986 SSRs with a frequency of 1 per 680 bp. Genomic distribution of SSRs revealed that 27% were present in the non-genic region whereas 73% were also present in the putative genic regions with 26% in 5′UTRs, 2...

  17. A rapid method for evaluation of the oxidation stability of castor oil FAME: influence of antioxidant type and concentration

    Energy Technology Data Exchange (ETDEWEB)

    Araujo, Susana V.; Luna, F. Murilo T.; Rola, Estelio M. Jr.; Azevedo, Diana C.S.; Cavalcante, Celio L. Jr. [Universidade Federal do Ceara, Departamento de Engenharia Quimica, Grupo de Pesquisa em Separacoes por Adsorcao - GPSA, Campus do Pici, 709, Fortaleza, CE, 60.455-900 (Brazil)

    2009-10-15

    The oxidation stability of castor oil fatty methyl ester (FAME), doped with four different phenolic antioxidants, was evaluated using a rapid method of thermal and air-contact degradation. The methodology is based on the induction times observed when the samples are contacted with pure oxygen at elevated pressures and temperatures. The results indicate different performances of the antioxidants as well as synergisms between antioxidants and biodiesel. In general, the addition of antioxidants increased from 6-15 times the stability of castor oil FAME., with BHA (butylated hydroxyanisol) showing the best results for improving antioxidation in castor oil biodiesel. (author)

  18. Effect of the organic garbage and castor oil plant pie on of crop growth characteristics of mamoneira (ricinus communis l.)

    OpenAIRE

    Márcia Maria Bezerra Guimarães; Edivan Silva Nunes Júnior; Vera Lúcia Antunes de Lima; Napoleão Esberard de Macedo Beltrão; Fabiana Xavier Costa; Francisco Ademilton Vieira Damaceno

    2009-01-01

    The main goal of this work was to evaluate the growth and development of the castor oil plant (Ricinus communis L.) submitted to the organic manuring, with castor oil plant pie and composed of organic garbage. The experiment was led at greenhouse, from October 2005 to March 2006, at Embrapa Algodão, state of Paraiba. The treatments were constituted from the addition of castor oil plant pie to the soil in the levels of 1.0; 2.0; 3.0 and 4.0 t ha-1 and organic garbage in the levels of 11.2; 22....

  19. Transesterification of triacetin and castor oil with methanol catalyzed by supported polyaniline-sulfate. A role of polymer morphology

    Czech Academy of Sciences Publication Activity Database

    Drelinkiewicz, A.; Kalemba-Jaje, Z.; Lalik, E.; Zieba, A.; Mucha, D.; Konyushenko, Elena; Stejskal, Jaroslav

    2013-01-01

    Roč. 455, 30 March (2013), s. 92-106. ISSN 0926-860X Institutional support: RVO:61389013 Keywords : transesterification * triacetin * castor oil Subject RIV: CD - Macromolecular Chemistry Impact factor: 3.674, year: 2013

  20. Evaluation of Drought Stress and Foliar Chitosan on Biochemical Characterices of Castor Bean (Ricinus communis L.)

    OpenAIRE

    Hassan Makarian; Jafar Masoud Sinaki; Hossein Abbaspour; Sara Karimi

    2012-01-01

    Drought is the most significant factor restricting plant production on majority of agricultural fields of the world. In order to study the effects of drought stress and chitosan foliar on antioxidant enzymes and proline content of three castor bean cultivars under field conditions. The results showed that with an increase in the intensity of drought stress on castor bean cultivars there was a increased CAT, POD enzymes activity. That highest CAT activity related to drought stress levels (D2, ...

  1. Synthesis and Physicochemical Behaviour of Polyurethane-Multiwalled Carbon Nanotubes Nanocomposites Based on Renewable Castor Oil Polyols

    OpenAIRE

    2014-01-01

    Polyurethanes (PUs) are high performance materials, with vast industrial and engineering applications. In this research, effects of Multiwalled Carbon Nanotubes (MWCNTs) on physicochemical properties of Castor Oil based Polyurethanes (COPUs) were studied. MWCNTs were added in different weight percentages (0% to 1% wt) in a castor oil based polyurethane (COPUs-MWCNTs) nanocomposites. The composition, structure, and morphology of polyurethanes were characterized by Fourier transform infrared sp...

  2. Polyols Prepared from Ring-Opening Epoxidized Soybean Oil by a Castor Oil-Based Fatty Diol

    OpenAIRE

    Jing Zhang; Ji Jun Tang; Jiao Xia Zhang

    2015-01-01

    Several biorenewable vegetable oil-based polyols with different molecular weights and various hydroxyl functionalities were successfully prepared by ring-opening epoxidized soybean oil with a castor oil-based fatty diol. It was found that several factors, including reaction time, reaction temperature, and molar ratios between epoxidized soybean oil and castor oil diol, affect structures and rheology behaviors of the final polyols. Proton NMR, FT-IR, GPC, and rheometry results revealed that th...

  3. Gene Structures, Evolution, Classification and Expression Profiles of the Aquaporin Gene Family in Castor Bean (Ricinus communis L.)

    OpenAIRE

    Zhi Zou; Jun Gong; Qixing Huang; Yeyong Mo; Lifu Yang; Guishui Xie

    2015-01-01

    Aquaporins (AQPs) are a class of integral membrane proteins that facilitate the passive transport of water and other small solutes across biological membranes. Castor bean (Ricinus communis L., Euphobiaceae), an important non-edible oilseed crop, is widely cultivated for industrial, medicinal and cosmetic purposes. Its recently available genome provides an opportunity to analyze specific gene families. In this study, a total of 37 full-length AQP genes were identified from the castor bean gen...

  4. Fatty acid methyl esters (FAMEs) from castor oil: Production process assessment and synergistic effects in its properties

    Energy Technology Data Exchange (ETDEWEB)

    Canoira, Laureano; Garcia Galean, Juan; Alcantara, Ramon [Department of Chemical Engineering and Fuels, ETS Ingenieros de Minas, Universidad Politecnica de Madrid, Rios Rosas 21, 28003 Madrid (Spain); Lapuerta, Magin; Garcia-Contreras, Reyes [Maquinas y Motores Termicos, ETS Ingenieros Industriales, Universidad de Castilla La Mancha, Avda. Camilo Jose Cela s/n, 13071 Ciudad Real (Spain)

    2010-01-15

    Fatty acid methyl esters (FAMEs) from castor oil have been synthesized by methanolysis catalyzed by sodium methoxide and the optimal transesterification conditions have been found. However, some properties of the castor FAME render it unsuitable in pure state for its direct use as fuel in internal combustion engines. Thus, blends with reference diesel have been prepared and their properties have been evaluated. Among these properties, the oxidative stability of the blends shows a negative anti-synergistic effect, that is, all the blends have an induction period lower than the pure reference diesel and the pure castor FAME. On the contrary, the lubricity shows a positive synergistic effect, the wear scar of the blends being always lower than those of the pure components. The cold-filter plugging point of the blends shows also a singular effect, since the filterability remains identical to that of the reference diesel until around 50 vol% of castor FAME has been blended with it. The blends of castor FAME and reference diesel until approximately 40 vol% of castor FAME meet most of the specifications of the EN 590 standard. (author)

  5. Analysis of quality of the biogasoils of palm oil and castor oil

    International Nuclear Information System (INIS)

    Biodiesel is a fuel made from raw materials of renewable origin such as vegetable oils. The objective of this work is to make a quality analysis of two types of biodiesel made from raw materials available in Colombia such as palm oil and castor oil. Biodiesel from palm oil complies with the majority of technical requirements specified by ASTM standards D-975 y D-6751. A high cloud point is the main drawback of this kind of biodiesel. This is a consequence of its highly saturated chemical nature. On the other hand, biodiesel from castor oil presents more difficulties in order to be used in diesel engines because of having a low cetane index and a high viscosity

  6. Growth of castor bean BRS-149 nordestina fertilized with nitrogen, phosphorus and potassium

    Directory of Open Access Journals (Sweden)

    Diva Lima de Araujo

    2009-12-01

    Full Text Available A trial was carried out in a greenhouse located at the Federal University of Campina Grande, in Campina Grande, Paraiba State, Brazil, with castor bean plants (Ricinus communis L., cv BRS Nordestina, in order to evaluate the effects of nitrogen, phosphorus and potassium on the growth. A completely randomized design with three replications and 15 treatments originated from a baconian matrix was adopted. Reference doses were 40:90:60 kg ha-1 of N:P2O5:K2O, respectively. Plant height, stem diameter, number and length of leaves were measured at 20, 40, 60, 80, 100, 120 and 140 days after planting (DAP. The unbalanced fertilization affected the development and seed production of castor bean, and the best response of the plants was observed at levels of 200 kg ha-1 de N; 150 kg ha-1 de P2O5 and 150 kg ha-1 de K2O.

  7. Comparison of lubricant properties of castor oil and commercial engine oil

    Directory of Open Access Journals (Sweden)

    Binfa Bongfa

    2015-06-01

    Full Text Available The tribological performance of crude Nigeria-based castor oil has been investigated and compared with that of a foreign, 20W-50 high quality crankcase oil, to see its suitability as base oil for lubricating oils in indigenous vehicle and power plants engines. The experiment was conducted using a four ball tester. The results showed that unrefined castor oil has superior friction reduction and load bearing capability in an unformulated form than the commercial oil; can compete favourably with the commercial oil in wear protection when formulated with suitable antiwear agent, hence can be a good alternative base stock for crankcase oils suitable for Nigeria serviced vehicles, and plants engines from tribological, environmental, and non-food competitive points of view.

  8. Prospective study for the production of oleochemicals derivates from castor oil in Colombia

    Directory of Open Access Journals (Sweden)

    Margarita Guerrero

    2010-04-01

    Full Text Available There are many ways get closet to the future, being the prospective the one that conceives the future, not like an unique reality but like a multiple one, obtained as a result of the identification of the human beign future actions. For all this, the human being takes knowledge, the yearings and the fears that he sees for the actions he will undertake. Using the prospective, this article outlines the dynamics that will have the oleochemical castor oil sector, because Colombia has resources to develop Ricinus comunnis cultivation and industrial uses of castor oil and its derivates. The study establishes the keys that define the current and future behaviour of the system, the position and the power of each one of the involved actors will have, and the determination of the scenarios (future representations with more probability to occur, as well as the definition of the scenario wanted and the strategies that will allow to reach it.

  9. Production and characterization of MDF using eucalyptus fibers and castor oil-based polyurethane resin

    Directory of Open Access Journals (Sweden)

    Campos Cristiane Inácio de

    2004-01-01

    Full Text Available The growing popularity of wooden panels renders this market segment increasingly competitive. MDF (Medium Density Fiberboard, in particular, is widely employed for a variety of applications, including civil construction, furniture, and packaging. This paper discusses a study of MDF produced from alternative raw materials, i.e., Eucalyptus fibers and castor-oil-based polyurethane resin. Physical and mechanical tests were performed to determine the MDF's modulus of elasticity and modulus of rupture in static bending tests, its swelling, water absorption, moisture and density. The results of the physical and mechanical characterization of this laboratory-produced MDF are discussed and compared with the Euro MDF Board standard. MDF produced with eucalyptus fiber and castor-oil-based polyurethane resin presents results very satisfactory.

  10. Performance of Amblyseius herbicolus on broad mites and on castor bean and sunnhemp pollen.

    Science.gov (United States)

    Rodríguez-Cruz, Fredy Alexander; Venzon, Madelaine; Pinto, Cleide Maria Ferreira

    2013-08-01

    Amblyseius herbicolus (Banks) is found associated with broad mites Polyphagotarsonemus latus in crops such as chili pepper in Brazil. The species has a potential for controlling P. latus, but little is known about its development and reproduction on this pest as well as on other food sources. We studied biological, reproductive and life table parameters of A. herbicolus on three different diets: broad mites, castor bean pollen (Ricinus communis) and sunnhemp pollen (Crotalaria juncea). The predator was able to develop and reproduce on all diets. However, its intrinsic growth rate was higher on the diet of broad mites or on castor bean pollen than on sunnhemp pollen. Differences among pollen species may be due to their nutritional content. Feeding on alternative food such as pollen can facilitate the predator's mass rearing and maintain its population on crops when prey is absent or scarce. Other strategies of using pollen to sustain predator population and reduce pest damage are discussed. PMID:23417701

  11. Large spatial self-phase modulation in castor oil enhanced by gold nanoparticles

    Science.gov (United States)

    Alencar, Márcio A. R. C.; Nascimento, César M.; Chávez-Cerda, Sabino; da Silva, Monique G. A.; Meneghetti, Mario R.; Hickmann, Jandir M.

    2006-02-01

    Spatial self-phase modulation was observed when a CW laser beam propagated along a cell containing castor oil. The minimum power needed to excite this effect decreases when the sample length is increased, as well as when the laser wavelength approaches to the absorption band of the medium. The same phenomenon was also observed when a laser beam interacts with a colloidal solution of gold nanoparticles in castor oil. For this system the self-phase modulation minimum power decreased dramatically, which indicates that the nonlinear refractive index for this system is enhanced due to the gold nanoparticles. Moreover, for laser wavelength near to the plasmon resonance of the gold nanoparticles, this enhancement factor is even higher. Although the large value of those media nonlinearity, its temporal response is slow. This fact suggests that this phenomenon is due to thermal effects mainly.

  12. Comments on edge turbulence during lower hybrid current drive experiment on CASTOR tokamak

    International Nuclear Information System (INIS)

    Edge plasma electrostatic turbulence is discussed from the point of view of its role in inducing anomalous particle transport. Preliminary results are presented of plasma edge fluctuation measurements obtained in the CASTOR tokamak by using the Langmuir probe technique. The level of edge turbulence found is sufficiently high to explain the anomalous particle losses observed in the ohmic heting regime of the tokamak discharge. On the other hand, it decreases appreciably during the combined lower hybrid current drive and ohmic heating regimes, the particle confinement time simultaneously increasing about twice. Thus, the fluctuation induced transport seems to be responsible for the anomalous particle transport in the CASTOR tokamak. (J.U.). 10 figs., 26 refs

  13. Analyses to demonstrate the thermal performance of the CASTOR KN12

    Energy Technology Data Exchange (ETDEWEB)

    Diersch, R.; Weiss, M. [Gesellschaft fuer Nuklear-Behaelter mbH (Germany); Tso, C.F.; Powell, D. [Arup (United Kingdom); Choy, B.I.; Lee, H.Y. [KHNP-NETEC (Korea)

    2004-07-01

    The CASTOR {sup registered} KN-12 is a new cask design of GNB for dry and wet transportation of up to 12 PWR spent nuclear fuel assemblies in Korea. It complies with the requirements of 10 CFR 71 [1] and IAEA ST-1 [2] for TYPE B(U)F packages. It received its transport license from the Korean Competent Authority KINS in July 2002 and is now in use in South Korea. Demonstration of the cask's compliance with the regulatory requirements in the area of thermal performance has been carried out by a combination of testing carried out by Korea Atomic Energy Research Institute and analyses carried out by Arup. This paper describes the analyses to demonstrate the thermal performance of the cask and compliance with regulatory requirements under normal and hypothetical accident conditions of transport. Other aspects of the design of the CASTOR {sup registered} KN12 are presented in other papers at this conference.

  14. Exploiting EST databases for the development and characterization of EST-SSR markers in castor bean (Ricinus communis L.

    Directory of Open Access Journals (Sweden)

    Yang Jun-Bo

    2010-12-01

    Full Text Available Abstract Background The castor bean (Ricinus communis L., a monotypic species in the spurge family (Euphorbiaceae, 2n = 20, is an important non-edible oilseed crop widely cultivated in tropical, sub-tropical and temperate countries for its high economic value. Because of the high level of ricinoleic acid (over 85% in its seed oil, the castor bean seed derivatives are often used in aviation oil, lubricants, nylon, dyes, inks, soaps, adhesive and biodiesel. Due to lack of efficient molecular markers, little is known about the population genetic diversity and the genetic relationships among castor bean germplasm. Efficient and robust molecular markers are increasingly needed for breeding and improving varieties in castor bean. The advent of modern genomics has produced large amounts of publicly available DNA sequence data. In particular, expressed sequence tags (ESTs provide valuable resources to develop gene-associated SSR markers. Results In total, 18,928 publicly available non-redundant castor bean EST sequences, representing approximately 17.03 Mb, were evaluated and 7732 SSR sites in 5,122 ESTs were identified by data mining. Castor bean exhibited considerably high frequency of EST-SSRs. We developed and characterized 118 polymorphic EST-SSR markers from 379 primer pairs flanking repeats by screening 24 castor bean samples collected from different countries. A total of 350 alleles were identified from 118 polymorphic SSR loci, ranging from 2-6 per locus (A with an average of 2.97. The EST-SSR markers developed displayed moderate gene diversity (He with an average of 0.41. Genetic relationships among 24 germplasms were investigated using the genotypes of 350 alleles, showing geographic pattern of genotypes across genetic diversity centers of castor bean. Conclusion Castor bean EST sequences exhibited considerably high frequency of SSR sites, and were rich resources for developing EST-SSR markers. These EST-SSR markers would be particularly

  15. Characterization of adhesive of polyurethane from castor oil by FTIR, TGA and XRD

    International Nuclear Information System (INIS)

    Castor oil polyurethanes are an alternative to adhesives that emanate volatile compounds. This adhesive come from a renewable source and has very low toxicity. In this work the microstructural and thermal characterization is presented. This material is partially crystalline. The mass loss start at 240 deg C and the glass transition temperature is 60 deg C. Then the adhesive is adequate to be employed at temperatures lower than 60 deg C. (author)

  16. Field anaesthetic and surgical techniques for implantation of intraperitoneal radio transmitters in Eurasian beavers Castor fiber

    OpenAIRE

    Ranheim, Birgit; Rosell, Frank; Haga, Henning Andreas; Arnemo, Jon Martin

    2004-01-01

    Radio transmitters were implanted intraperitoneally in 22 (nine females, 13 males) adult, territorial Eurasian beavers Castor fiber under field conditions. Two different injectable anaesthestic drug combinations were tested. Access to the peritoneal cavity was made through a ventral midline incision. The animals in group # 1 (N = 10) were initially injected with medetomidine (0.05 mg/kg), ketamine (5 mg/kg) and butorphanol (0.1 mg/kg). Three animals needed additional injections of the drug co...

  17. Glutathione Preservation during Storage of Rat Lenses in Optisol-GS and Castor Oil

    DEFF Research Database (Denmark)

    Holm, Thomas; Brøgger-Jensen, Martin Rocho; Johnson, Leif;

    2013-01-01

    Glutathione concentration in the lens decreases in aging and cataractous lenses, providing a marker for tissue condition. Experimental procedures requiring unfrozen lenses from donor banks rely on transportation in storage medium, affecting lens homeostasis and alterations in glutathione levels....... The aim of the study was to examine the effects of Optisol-GS and castor oil on lens condition, determined from their ability to maintain glutathione concentrations....

  18. Optimum Operating Conditions for Epoxidation Reaction of Jojoba and Castor Oils

    Directory of Open Access Journals (Sweden)

    El-Adly R. A

    2014-03-01

    Full Text Available The goal of this paper is to determine the best set of parameters such as, glacial acetic acid to ethylenic unsaturation mole ratio (acid/ethylene, hydrogen peroxide to ethylenic unsaturation mole ratio (H2O2/ethylene and temperature on epoxidation conversion based on experimental results, with respect to time. The effect of these parameters has been studied in a separate set of experiments. Their ranges were as follows: 0.2-0.8Wt%, 0.75-3Wt%, and 40oC-80oC respectively. Six models have been introduced to indicate the effect of these three variables on conversion for both jojoba and castor oil, and the prediction abilities of the resultant models were tested. Regression analysis is used to extract the introduced non linear models. In addition, two new correlations have been introduced to incorporate all the studied variables and their effect on conversion simultaneously for both jojoba and castor oil. An optimization program has been introduced to determine the optimum operating conditions for maximum conversion for both jojoba and castor oil. The study shows that, the maximum conversion for epoxidized jojoba oil (66% could be achieved at acid/ethylene ratio: 0.4, H2O2/ethylene ratio: 1.44; temp: 66.5 and time is 8hr. While the maximum conversion for epoxidized castor oil (53.24% could be achieved at acid/ethylene ratio: 0.37; H2O2/ethylenes ratio: 1.32; temp: 61 and time is 8hr. the model results are strongly agreed with the experimental results.

  19. Accelerated artificial aging of particleboards from residues of CCB treated Pinus sp. and castor oil resin

    OpenAIRE

    Marília da Silva Bertolini; Francisco Antonio Rocco Lahr; Maria Fátima do Nascimento; José Augusto Marcondes Agnelli

    2013-01-01

    Tests simulating exposure to severe weather conditions have been relevant in seeking new applications for particleboard. This study aimed to produce particleboards with residues of CCB (chromium-copper-boron oxides) impregnated Pinus sp. and castor oil-based polyurethane resin, and to evaluate their performance before and after artificial accelerated aging. Panels were produced with different particle mass, resin content and pressing time, resulting eight treatments. Particles moisture and si...

  20. Production and Characterization of Biodiesel Using Nonedible Castor Oil by Immobilized Lipase from Bacillus aerius

    OpenAIRE

    2015-01-01

    A novel thermotolerant lipase from Bacillus aerius was immobilized on inexpensive silica gel matrix. The immobilized lipase was used for the synthesis of biodiesel using castor oil as a substrate in a solvent free system at 55°C under shaking in a chemical reactor. Several crucial parameters affecting biodiesel yield such as incubation time, temperature, substrate molar ratio, and amount of lipase were optimized. Under the optimized conditions, the highest biodiesel yield was up to 78.13%. Th...

  1. Formation of convective cells in the scrape-off layer of the Castor tokamak

    International Nuclear Information System (INIS)

    We describe experiments with a biased electrode inserted into the scrape-off layer (SOL) of the CASTOR tokamak. The resulting radial and poloidal electric field and plasma density modification are measured by means of Langmuir probe arrays with high temporal and spatial resolutions. Poloidally and radially localized stationary structures of the electric field (convective cells) are identified and a related significant modification of the particle transport in the SOL is observed. (authors)

  2. Castor oil and commercial thermoplastic polyurethane membranes modified with polyaniline: a comparative study

    OpenAIRE

    José Humberto Santos Almeida Júnior; Daniel Assumpção Bertuol; Alvaro Meneguzzi; Carlos Arthur Ferreira; Franco Dani Rico Amado

    2013-01-01

    The study of conducting polymeric membranes is decisive in some areas, as in fuel cells and electrodialysis. This work aims the study of membranes using conventional and conductive polymers blends. Two types of polyurethane were used as conventional polymers, commercial thermoplastic polyurethane and polyurethane synthesized from castor oil and 4-4-dicyclohexylmethane isocyanate. Two kinds of conducting polymers were used, polyaniline doped with organic acid and a self doped polyaniline. The ...

  3. Simultaneous allergen inactivation and detoxification of castor bean cake by treatment with calcium compounds

    Directory of Open Access Journals (Sweden)

    K.V. Fernandes

    2012-11-01

    Full Text Available Ricinus communis L. is of great economic importance due to the oil extracted from its seeds. Castor oil has been used for pharmaceutical and industrial applications, as a lubricant or coating agent, as a component of plastic products, as a fungicide or in the synthesis of biodiesel fuels. After oil extraction, a castor cake with a large amount of protein is obtained. However, this by-product cannot be used as animal feed due to the presence of toxic (ricin and allergenic (2S albumin proteins. Here, we propose two processes for detoxification and allergen inactivation of the castor cake. In addition, we establish a biological test to detect ricin and validate these detoxification processes. In this test, Vero cells were treated with ricin, and cell death was assessed by cell counting and measurement of lactate dehydrogenase activity. The limit of detection of the Vero cell assay was 10 ng/mL using a concentration of 1.6 x 10(5 cells/well. Solid-state fermentation (SSF and treatment with calcium compounds were used as cake detoxification processes. For SSF, Aspergillus niger was grown using a castor cake as a substrate, and this cake was analyzed after 24, 48, 72, and 96 h of SSF. Ricin was eliminated after 24 h of SSF treatment. The cake was treated with 4 or 8% Ca(OH2 or CaO, and both the toxicity and the allergenic properties were entirely abolished. A by-product free of toxicity and allergens was obtained.

  4. Antimicrobial action of sodium hypochlorite and castor oil solutions for denture cleaning – in vitro evaluation

    Directory of Open Access Journals (Sweden)

    Marcela Moreira SALLES

    2015-01-01

    Full Text Available The objective of this in vitro study was to evaluate the antimicrobial action of sodium hypochlorite (0.25% and 0.50% and 10% castor oil solutions against specific microorganisms, by counting Colony Forming Units (CFU of clinically important bacteria and Candida species. Acrylic resin specimens (n = 320; Lucitone 550 were obtained from square metal matrices (10 x 10 x 2 mm, sterilized by microwave (650W, for 6 minutes and contaminated by Staphylococcus aureus, Pseudomonas aeruginosa, Candida albicans, Bacillus subtilis, Escherichia coli, Streptococcus mutans, Enterococcus faecalisand Candida glabrata. The specimens were immersed for 20 minutes in one of the following hygiene solutions (n = 10/each: A – 0.25% Sodium hypochlorite; B – 0.5% Sodium hypochlorite; C – 10% Castor oil solution; and D (Control – saline. Adhered cells were suspended and inoculated into a selective solid medium (37ºC for 24 h. The Student’s t-test (α = 0.05 was performed to compare log10(CFU+1/mL between Groups C and D. The results showed that sodium hypochlorite (0.25% and 0.5% completely eliminated all detectable microorganisms. The castor oil solution eliminatedB. subtilisand reduced counts for other strains. Differences between C and D were significant (p E. faecalis. Both sodium hypochlorite solutions (0.25% and 0.5% were effective in eliminating all microorganisms evaluated, and may be useful as cleaning solutions for complete dentures. The castor oil solution provided moderate efficacy and performed differently on the tested species, with the strongest effect on B. subtilis and with non-significant action on E. faecalis.

  5. Graphite–castor oil polyurethane composite electrode surfaces – AFM morphological and electrochemical characterisation

    OpenAIRE

    Chiorcea-Paquim, Ana-Maria; Diculescu, Victor Constantin; Cervini, Priscila; Cavalheiro, Eder Tadeu Gomes; Brett, Ana Maria Oliveira

    2014-01-01

    Graphite–castor oil polyurethane composite electrodes with different graphite weight percentages, 30–70% graphite–polyurethane w w−1, were morphologically studied by atomic force microscopy (AFM) and voltammetry. AFM images and r.m.s. roughness measurements demonstrated that the polyurethane roughness decreased with increasing the graphite content, composites of 50% and 60% graphite–polyurethane w w−1 showing the smother electrode surface. The electrochemical characterisation was performed in...

  6. Production and characterization of MDF using eucalyptus fibers and castor oil-based polyurethane resin

    OpenAIRE

    Campos Cristiane Inácio de; Lahr Francisco Antonio Rocco

    2004-01-01

    The growing popularity of wooden panels renders this market segment increasingly competitive. MDF (Medium Density Fiberboard), in particular, is widely employed for a variety of applications, including civil construction, furniture, and packaging. This paper discusses a study of MDF produced from alternative raw materials, i.e., Eucalyptus fibers and castor-oil-based polyurethane resin. Physical and mechanical tests were performed to determine the MDF's modulus of elasticity and modulus of ru...

  7. Isocyanate-Functionalized Chitin and Chitosan as Gelling Agents of Castor Oil

    OpenAIRE

    Franco, José M.; Rocío Gallego; Jesús F. Arteaga; Concepción Valencia

    2013-01-01

    The main objective of this work was the incorporation of reactive isocyanate groups into chitin and chitosan in order to effectively use the products as reactive thickening agents in castor oil. The resulting gel-like dispersions could be potentially used as biodegradable lubricating greases. Three different NCO–functionalized polymers were obtained: two of them by promoting the reaction of chitosan with 1,6-hexamethylene diisocyanate (HMDI), and the other by using chitin instead of chitosan....

  8. Alternative castor oil-based polyurethane adhesive used in the production of plywood

    OpenAIRE

    2004-01-01

    Plywood is normally produced with urea-formaldehyde and/or phenol-formaldehyde adhesives. However, the former is considerably toxic and environmentally damaging, while the latter is expensive, thus motivating the search for alternative raw materials in plywood production. The castor oil-based polyurethane adhesive developed at the São Carlos Institute of Chemistry, University of São Paulo, is an environmentally friendly vegetal oil-based polymer that is harmless to humans. The wood species Eu...

  9. Effect of microwave-assisted system on transesterification of castor oil with ethanol

    OpenAIRE

    Gina M. Hincapié1, Sabine Valange2, Joël Barrault2, Jorge A. Moreno1, Diana P. López1

    2014-01-01

    Abstract A systematic study of microwave-assisted transesterification of castor oil was conducted in the presence of ethanol and of potassium hydroxide as catalyst. Effects of various reaction parameters such as reaction time, catalyst concentration, reaction temperature and ethanol-oil molar ratio were analyzed. Ethyl esters were successfully produced by microwave-assisted transesterification. The maximum yield was 80.1% at 60°C, 10:1 alcohol: oil molar ratio, 1.5% potassium hydroxide...

  10. Cadmium sulfide quantum dots stabilized by castor oil and ricinoleic acid

    Science.gov (United States)

    Kyobe, Joseph William; Mubofu, Egid Beatus; Makame, Yahya M. M.; Mlowe, Sixberth; Revaprasadu, Neerish

    2016-02-01

    Castor oil and ricinoleic acid (an isolate of castor oil) are environmentally friendly bio-based organic surfactants that have been used as capping agents to prepare nearly spherical cadmium sulfide quantum dots (QDs) at 230, 250 and 280 °C. The prepared quantum dots were characterized by Ultra violet-visible (UV-vis), Photoluminescence (PL), Transmission Electron Microscopy (TEM), High Resolution Transmission Electron Microscopy (HRTEM) and X-ray diffraction (XRD) giving an overall CdS QDs average size of 5.14±0.39 nm. The broad XRD pattern and crystal lattice fringes in the HRTEM images showed a hexagonal phase composition of the CdS QDs. The calculated/estimated average size of the prepared castor oil capped CdS QDs for various techniques were 4.64 nm (TEM), 4.65 nm (EMA), 5.35 nm (UV-vis) and 6.46 nm (XRD). For ricinoleic acid capped CdS QDs, the average sizes were 5.56 nm (TEM), 4.78 nm (EMA), 5.52 nm (UV-vis) and 8.21 nm (XRD). Optical properties of CdS QDs showed a change of band gap energy from its bulk band gap of 2.42-2.82 eV due to quantum size confinement effect for temperature range of 230-280 °C. Similarly, a blue shift was observed in the photoluminescence spectra. Scanning electron microscope (SEM) observations show that the as-synthesized CdS QDs structures are spherical in shape. Fourier transform infra-red (FTIR) studies confirms the formation of castor oil and ricinoleic acid capped CdS QDs.

  11. Characterization and Digestibility of Detoxified Castor Oil Meal for Japanese Quails

    OpenAIRE

    PA dos Santos; MCMM Ludke; JV Ludke; CBV Rabello; MJB dos Santos; TR Torres

    2015-01-01

    ABSTRACT These experiments were performed to determine the chemical composition, coefficients of nutrient and energy metabolizability, amino acid composition, and cytotoxicity of different castor oil meals subjected to different detoxification processes and added to the diet of Japanese quails. In the trial, 180 46-d-old female Japanese quails were distributed according to a completely randomized design into five treatments and with replicates of six bird each. The treatments consisted of fol...

  12. Simultaneous allergen inactivation and detoxification of castor bean cake by treatment with calcium compounds

    Energy Technology Data Exchange (ETDEWEB)

    Fernandes, K.V.; Deus-de-Oliveira, N. [Laboratório de Química e Função de Proteínas e Peptídeos, Centro de Biociências e Biotecnologia, Universidade Estadual do Norte Fluminense Darcy Ribeiro, Rio de Janeiro, RJ (Brazil); Godoy, M.G. [Laboratório de Biotecnologia Microbiana, Instituto de Química, Universidade Federal do Rio de Janeiro, Rio de Janeiro, RJ (Brazil); Guimarães, Z.A.S. [Laboratório de Biologia Celular e Tecidual, Centro de Biociências e Biotecnologia, Universidade Estadual do Norte Fluminense Darcy Ribeiro, Rio de Janeiro, RJ (Brazil); Nascimento, V.V. [Laboratório de Química e Função de Proteínas e Peptídeos, Centro de Biociências e Biotecnologia, Universidade Estadual do Norte Fluminense Darcy Ribeiro, Rio de Janeiro, RJ (Brazil); Melo, E.J.T. de [Laboratório de Biologia Celular e Tecidual, Centro de Biociências e Biotecnologia, Universidade Estadual do Norte Fluminense Darcy Ribeiro, Rio de Janeiro, RJ (Brazil); Freire, D.M.G. [Laboratório de Biotecnologia Microbiana, Instituto de Química, Universidade Federal do Rio de Janeiro, Rio de Janeiro, RJ (Brazil); Dansa-Petretski, M.; Machado, O.L.T. [Laboratório de Química e Função de Proteínas e Peptídeos, Centro de Biociências e Biotecnologia, Universidade Estadual do Norte Fluminense Darcy Ribeiro, Rio de Janeiro, RJ (Brazil)

    2012-08-24

    Ricinus communis L. is of great economic importance due to the oil extracted from its seeds. Castor oil has been used for pharmaceutical and industrial applications, as a lubricant or coating agent, as a component of plastic products, as a fungicide or in the synthesis of biodiesel fuels. After oil extraction, a castor cake with a large amount of protein is obtained. However, this by-product cannot be used as animal feed due to the presence of toxic (ricin) and allergenic (2S albumin) proteins. Here, we propose two processes for detoxification and allergen inactivation of the castor cake. In addition, we establish a biological test to detect ricin and validate these detoxification processes. In this test, Vero cells were treated with ricin, and cell death was assessed by cell counting and measurement of lactate dehydrogenase activity. The limit of detection of the Vero cell assay was 10 ng/mL using a concentration of 1.6 × 10{sup 5} cells/well. Solid-state fermentation (SSF) and treatment with calcium compounds were used as cake detoxification processes. For SSF, Aspergillus niger was grown using a castor cake as a substrate, and this cake was analyzed after 24, 48, 72, and 96 h of SSF. Ricin was eliminated after 24 h of SSF treatment. The cake was treated with 4 or 8% Ca(OH){sub 2} or CaO, and both the toxicity and the allergenic properties were entirely abolished. A by-product free of toxicity and allergens was obtained.

  13. Can beaver Castor fiber be selectively harvested by sex and age during spring hunting?

    OpenAIRE

    Parker, Howard; Rosell, Frank; Hermansen, Tore André; Sørløkk, Gjermund; Stærk, Martin

    2000-01-01

    In Norway, Sweden and Finland hunting Eurasian beaver Castor fiber Linnaeus, 1758 with firearms is presently the main harvest form and most are shot in late April and early May. As beaver cannot be sexed from external characteristics, and ageing by size is difficult, hunters usually shoot the first animal seen. This tends to select for pregnant females, which may conflict with management objectives. This study investigated whether pregnant females were more susceptible to being shot at a pa...

  14. Magnetic measurements using array of integrated Hall sensors on the CASTOR tokamak

    Czech Academy of Sciences Publication Activity Database

    Ďuran, Ivan; Hronová-Bilyková, Olena; Stöckel, Jan; Sentkerestiová, J.; Havlíček, Josef

    2008-01-01

    Roč. 79, č. 10 (2008), 10F123-10F123. ISSN 0034-6748. [Topical Conference on High-Temperature Plasma Diagnostics/17th./. Albuquerque, 11.05.2008-15.05.2008] R&D Projects: GA MPO 2A-1TP1/101 Institutional research plan: CEZ:AV0Z20430508 Keywords : Galvanomagnetic Sensor * Fusion Reactor * Magnetic Diagnostics * CASTOR tokamak Subject RIV: BG - Nuclear, Atomic and Molecular Physics, Colliders Impact factor: 1.738, year: 2008

  15. 环氧蓖麻油合成研究%Synthesis of Epoxidized Castor Oil

    Institute of Scientific and Technical Information of China (English)

    侯宾; 向开权; 黄东海; 杨艳

    2012-01-01

    The castor oil was prepared using the peroxyacetic acid by catalysis of phosphoric acid. Some factors which had effect on the epoxy value of product, such as reaction time, reaction temperature, the a- mounts of hydrogen peroxide etc were discussed. The result showed the effects of various parameters as follows:reaction time〉reaction temperature 〉 the amount of acid consumption〉 the amount of hydrogen peroxide 〉 catalyst concentration. FI-IPt was exploited to characterize the epoxidized castor oil, and then the differences of TG and DTG were compared to examine the thermal stability of epoxidized castor oil.%以磷酸为催化剂、采用过氧乙酸法对蓖麻油(CO)进行环氧化研究,探索了反应时间、反应温度和双氧水的用量等变量参数对蓖麻油环氧化的影响,得到各变量参数对反应的影响大小为:时间〉温度〉酸量〉双氧水的量〉催化剂的浓度.利用FI-IR对环氧蓖麻油(ECO)进行了表征,然后对比了CO和ECO的TG和DTG热稳定性.

  16. Alternative castor oil-based polyurethane adhesive used in the production of plywood

    Directory of Open Access Journals (Sweden)

    Fabricio Moura Dias

    2004-09-01

    Full Text Available Plywood is normally produced with urea-formaldehyde and/or phenol-formaldehyde adhesives. However, the former is considerably toxic and environmentally damaging, while the latter is expensive, thus motivating the search for alternative raw materials in plywood production. The castor oil-based polyurethane adhesive developed at the São Carlos Institute of Chemistry, University of São Paulo, is an environmentally friendly vegetal oil-based polymer that is harmless to humans. The wood species Eucalyptus grandis offers favorable properties for plywood the manufacture. The study reported on here involved the use of castor oil-based polyurethane adhesive to produce plywood with Eucalyptus grandis layers. The plywood's performance was evaluated based on the results of physical and mechanical tests recommended by the Brazilian code, ABNT. Tests results showed higher values than those reported in the literature and recommended by the ABNT, indicating that the castor oil-based polyurethane adhesive is a promising glue for the manufacture of plywood.

  17. UV and gamma irradiation effects on surface properties of polyurethane derivative from castor oil

    International Nuclear Information System (INIS)

    Gamma and ultraviolet radiation effects on hardness, elastic modulus and viscoelastic properties of polyurethane derived from castor oil (PU) were investigated by nanoindentation tests. Modifications on surface morphology, induce by radiation, were observed by atomic force microscopy. The polyurethane derivative from castor oil shows good resistance to gamma radiation, with only small changes in hardness, elastic modulus, viscoelastic properties and contact angle. The hardness of PY increases at the near surface region due to UVA radiation and decreases after UVC radiation. The contact angle for water drop decreases after UVC radiation, by not after gamma radiation, despite a significant increase in roughness. Such results are attributed to different responses from polyurethane to radiation energy. Increase in hardness due to UVA is attributed to a higher crosslinking at shallow depths, while a decrease in mechanical properties may be attributed to chain scission. These results are consistent with the modifications on viscoelastic properties. Shore D hardness did not show the same trend as observed by nanoindentation results. Hardness, viscoelastic properties and contact angle of castor oil polyurethane are more severely influenced by UVC radiation, while gamma radiation does not have a significant effect. (author)

  18. UV and gamma irradiation effects on surface properties of polyurethane derivative from castor oil

    Energy Technology Data Exchange (ETDEWEB)

    Azevedo, Elaine C.; Nascimento, Eduardo M., E-mail: helunica@yahoo.com.br [Universidade Tecnologica Federal do Parana (UTFPR), Curitiba, PR (Brazil); Chierice, Gilberto O.; Claro Neto, Salvador [Universidade de Sao Paulo (IQSC/USP), Sao Carlos, SP (Brazil). Instituto de Quimica; Lepienski, Carlos M. [Universidade Federal do Parana (UFPR), Curitiba (Brazil)

    2013-07-01

    Gamma and ultraviolet radiation effects on hardness, elastic modulus and viscoelastic properties of polyurethane derived from castor oil (PU) were investigated by nanoindentation tests. Modifications on surface morphology, induce by radiation, were observed by atomic force microscopy. The polyurethane derivative from castor oil shows good resistance to gamma radiation, with only small changes in hardness, elastic modulus, viscoelastic properties and contact angle. The hardness of PY increases at the near surface region due to UVA radiation and decreases after UVC radiation. The contact angle for water drop decreases after UVC radiation, by not after gamma radiation, despite a significant increase in roughness. Such results are attributed to different responses from polyurethane to radiation energy. Increase in hardness due to UVA is attributed to a higher crosslinking at shallow depths, while a decrease in mechanical properties may be attributed to chain scission. These results are consistent with the modifications on viscoelastic properties. Shore D hardness did not show the same trend as observed by nanoindentation results. Hardness, viscoelastic properties and contact angle of castor oil polyurethane are more severely influenced by UVC radiation, while gamma radiation does not have a significant effect. (author)

  19. Potential of sunflower, castor bean, common buckwheat and vetiver as lead phytoaccumulators

    Directory of Open Access Journals (Sweden)

    Jailson do C. Alves

    2016-03-01

    Full Text Available ABSTRACT Studies concerning the tolerance, absorption and distribution of heavy metals in plants are essential for the success of phytoremediation programs. The present study was carried out in order to evaluate the potential of the sunflower, castor bean, common buckwheat and vetiver as lead phytoaccumulators. The species were grown in nutrient solution containing increasing doses of Pb (0, 50, 100, 200 and 400 mg L-1 during a 30-day exposure period. A completely randomized split-plot design was used, with a 4 x 5 factorial and three replicates. Significant reductions of dry matter of the root, shoot and whole plant were found in the all species under study as a function of the increased Pb doses. Vetiver showed higher tolerance to Pb contamination; sunflower and castor bean had intermediate tolerance and the common buckwheat proved to be the most sensitive species. The concentration and total content of Pb in plant compartments were significantly affected by the increased Pb doses in solution, and higher accumulation of this element was observed, in general, in the roots of the studied species. Common buckwheat proved to be not much promising for Pb-phytoremediation programs; sunflower showed potential for Pb phytoextraction and castor bean and vetiver were the most appropriate for Pb phytostabilization.

  20. Yield of castor bean fertilized with sewage sludge and potassium and magnesium sulphate

    Directory of Open Access Journals (Sweden)

    Thâmara F. M. Cavalcanti

    2015-08-01

    Full Text Available ABSTRACTThe aim of this study was to evaluate the yield and nutrition of castor bean in response to fertilization with sewage sludge and potassium (K and magnesium (Mg sulphate. The experiment was carried out from January to July 2011. The treatments, in a randomized block design with three replicates, in a Nitosol, corresponded to a factorial scheme (2 x 4 +1: two doses of K and Mg sulphate combined with four doses of sewage sludge (0, 2.60, 5.20 and 10.40 t ha-1, dry basis, applied based on its nitrogen (N content and the N requirement for the crop and an additional treatment with NPK. The castor bean grain yield fertilized with sewage sludge did not differ from conventional fertilization, with the maximum value achieved at a dose of 7.5 t ha-1 of sewage sludge. The fertilization with sewage sludge increased zinc and copper levels in the soil to values close to or higher than those in conventional fertilization, without any influence on the concentrations in the leaf. Fertilization with K and Mg sulphate increased the levels of these cations in the soil without affecting the concentrations in the leaves. The fertilization with sewage sludge increased the contents of organic matter, sulfur, zinc, iron, copper and boron in the soil, and manganese and boron in castor bean leaves.

  1. Two decades of experience with more than 750 CASTOR and CONSTOR transport and storage casks

    International Nuclear Information System (INIS)

    In 1983 the world-wide first dual purpose transport and storage cask - a CASTOR registered Ic-DIORIT - was loaded in Wuerenlingen/ Switzerland. Meanwhile CASTOR registered casks are used at 24 sites on four continents. Spent fuel assemblies of PWR, BWR, VVER, RBMK, FBR, MTR and THTR as well as vitrified high active waste canisters are transported and/or stored in these kinds of monolithic metal casks. MOX spent fuel of PWR and BWR has been loaded, too. Starting in the mid of the 90s, GNB developed the new CONSTOR registered cask concept, which is based on a double liner technology with a layer of heavy concrete as shielding material inbetween. This CONSTOR registered cask concept fulfils all design criteria for transport and for storage given by the IAEA recommendations and by national authorities. Up to now, more than 750 CASTOR registered and CONSTOR registered casks have been used for transports or/and loaded for longterm interim storage. More than two decades of storage experience attest to the excellent behavior of the casks including the metallic gaskets and the tightness monitoring system. Detailed measurements of temperatures and of gamma and neutron dose rates have shown in each case that the safety requirements have been fulfilled. These measurements allowed to reduce unnecessary safety margins to optimize the benefit for the user

  2. Energetic balance of castor oil methyl and ethyl esters; Balanco energetico de esteres metilicos e etilicos de oleo de mamona

    Energy Technology Data Exchange (ETDEWEB)

    Almeida Neto, Jose Adolfo de; Cruz, Rosenira Serpa da; Alves, Jaenes Miranda; Pires, Monica de Moura; Robra, Sabine [Universidade Estadual de Santa Cruz, Ilheus BA (Brazil). Grupo Bioenergia e Meio Ambiente]. E-mails: jalmeida@uesc.br; Parente Junior, Expedito [Tecnologias Bioenergeticas Ltda. (TECBIO), Fortaleza, CE (Brazil); Fundacao Nucleo de Tecnologia Industrial (NUTEC), Fortaleza, CE (Brazil)]. E-mail: expeditojr@tecbio.com.br

    2004-07-01

    Castor oil (Ricinus communis L.) is one of the cultures chosen by the biodiesel federal and state programs to supply raw material for biodiesel production - a biofuel indicated as renewable and less pollutant than its fossil competitor. An energetic balance was performed based on LCA - Life Cycle Analysis principles and Input-Output Analysis, comparing the castor oil energy performance with others traditional cultures: colza (Brassica napus) in Europe and soybean (Glycine max) in the United States. Energy balance (O-I) was positive in both production ways (methyl and ethyl) independent of coproduct use allocation alternative. The relation Output-Input (O-I) calculated for castor oil biodiesel [1.3-2.9] was higher than the colza (1.2-1.9) and lower than the soybean (3.2--3.4), independent of the way and allocation of the used byproduct. Both indicators suggest the energy and environmental viability of the castor oil biodiesel, provided that high agricultural productivity (higher than 1.500 kg/ha year) can be guaranteed. The potentialization of the positive energetic and environmental effects depends on the adequate utilization of the coproducts and process residues, the improvement of the energy efficiency in the the castor oil and biodiesel processing and the implementation of efficient management in the use of the chemical inputs (specially the N), responsible for up 5% of the total energy input.

  3. Genome-Wide Identification, Evolutionary Analysis, and Stress Responses of the GRAS Gene Family in Castor Beans

    Directory of Open Access Journals (Sweden)

    Wei Xu

    2016-06-01

    Full Text Available Plant-specific GRAS transcription factors play important roles in regulating growth, development, and stress responses. Castor beans (Ricinus communis are important non-edible oilseed plants, cultivated worldwide for its seed oils and its adaptability to growth conditions. In this study, we identified and characterized a total of 48 GRAS genes based on the castor bean genome. Combined with phylogenetic analysis, the castor bean GRAS members were divided into 13 distinct groups. Functional divergence analysis revealed the presence of mostly Type-I functional divergence. The gene structures and conserved motifs, both within and outside the GRAS domain, were characterized. Gene expression analysis, performed in various tissues and under a range of abiotic stress conditions, uncovered the potential functions of GRAS members in regulating plant growth development and stress responses. The results obtained from this study provide valuable information toward understanding the potential molecular mechanisms of GRAS proteins in castor beans. These findings also serve as a resource for identifying the genes that allow castor beans to grow in stressful conditions and to enable further breeding and genetic improvements in agriculture.

  4. Identification of trihydroxy fatty acids and the regiospecific quantification of the triacylglycerols containing trihydroxy fatty acids in castor oil by mass spectrometry

    Science.gov (United States)

    Ricinoleate, a monohydroxy fatty acid in castor oil, has many industrial uses. Dihydroxy and trihydroxy fatty acids can also be used in industry. We report here the identification of diacylglycerols and triacylglycerols containing trihydroxy fatty acids in castor oil. The Ci8 HPLC fractions of casto...

  5. Identification of Diacylglycerols and Triacylglycerols Containing Trihydroxy Fatty Acids in Castor Oil and the Regiospecific Identification of Triacylglycerols by Mass SpecTrometry

    Science.gov (United States)

    Ricinoleate, a monohydroxy fatty acid in castor oil, has many industrial uses. Dihydroxy and trihydroxy fatty acids can also be used in industry. We report here the identification of diacylglycerols and triacylglycerols containing trihydroxy fatty acids in castor oil. The C18 HPLC fractions of casto...

  6. Exogenous glutamine increases lipid accumulation in developing seeds of castor bean (Ricinus communis L. cultured in vitro

    Directory of Open Access Journals (Sweden)

    Zhang Yang

    2015-01-01

    Full Text Available This report describes biomass production and compositional changes of developing castor seeds in response to change in the nitrogen resource (glutamine of the medium. During the early developmental period (24-36 days after pollination, oil was found to initially accumulate in the developing seeds. Carbohydrates and oil were inversely related after glutamine provision (35 mM, in the culture medium. [U-14C] sucrose labeling was used to investigate the effect of metabolic fluxes among different storage materials. Addition of glutamine led to a 7% increase of labeling in lipids and an inverse decrease of labeling in carbohydrates. It was postulated that changes in the glutamine concentration in the medium are likely to influence the partitioning of resources between the various storage products, especially carbohydrates and oil. These observations will contribute to a better understanding of assimilate partitioning in developing castor seeds and the development of molecular strategies to improve castor bean seed quality and plant breeding studies.

  7. Single Functional Group Reactions of Castor Oil%蓖麻油的单官能团反应

    Institute of Scientific and Technical Information of China (English)

    张海飞; 朱新宝

    2015-01-01

    蓖麻油是具有独特性能的植物油类,分子中含有羟基、酯基、烯键等官能团,这些官能团可以单独进行反应得到蓖麻油衍生物,也可以其中两个或三个基团组合先后进行不同反应得到特殊用途的蓖麻油衍生物。主要对三种官能团单独进行化学反应综述归类,系统地介绍蓖麻油中各官能团所能发生的反应,简述不同反应产物的用途,较全面地介绍了蓖麻油基础化学反应知识,便于新反应和多官能团反应的设计和新产品的开发,提高蓖麻油深加工技术水平。%Castor oil is a kind of plant oils with unique properties,its molecule contains functional groups such as hydroxyl, ester group,ethylenic bond. Among these functional groups,single group can react to form castor oil derivatives,two or three groups of them also have different reactions to get special application of castor oil derivatives. Chemical reaction is summarized and classified according to the single group reaction. This article systematically introduces the reaction of the castor oil,briefly describes a variety of purposes of different products,comprehensively recommends castor oils basis chemistry knowledge,facilitates the design of the new chemical reaction and the development of new products,improves the castor oil deep processing technology.

  8. Analysis to foliate of mamoneira with emphasis in macronutrientes using organic garbage it is crooked of castor oil plant

    Directory of Open Access Journals (Sweden)

    Fabiana Xavier Costa

    2009-12-01

    Full Text Available Aimed with this work to evaluate the present macronutrientes in the leaves of the castor beans, in accomplished rehearsal being used the organic manuring front to three witness. The rehearsal was developed in the year of 2006, in house-of-vegetation of Embrapa Algodão, in Campina Grande PB. The treatments were constituted of the addition of the castor oil plant pie to the soil in the dosagens of 1, 2, 3, and 4 t. have-1 and I sand organic in the dosagens of 11,2; 22,4; 33,6 and 44,8 t. have-1 compared with three witness: the absolute (soil without addition of fertilizers; b he/she testifies relative 1 with the addition of NPK, in the dosagens of 180 kg N have-1, 64 kg P N have-1, 52 kg K have-1, he/she testifies relative 2, with addition of the micronutrients: boron (B, copper (Cu, iron (Fe, manganese (Mg and zinc (Zn , The used variable was her it analyzes to foliate to the 130 days after the emergency of the plântulas. An experimental design was used in blocks randomized with 11 treatments and four repetitions and the results of the macronutrientes were submitted to the variance analysis and of regression. The tenor of macronutrientes of the leaf of the castor beans had positive effect, when it was just used the castor oil plant pie in the variables. The composed of organic garbage didn't influence in the studied variables. Being, like this, the castor oil plant pie is constituted in a very interesting organic fertilizer for the growth, development, productivity and tenor of oil of the castor beans.

  9. Dry Cask Storage Characterization Project - Phase 1: CASTOR V/21 Cask Opening and Examination

    International Nuclear Information System (INIS)

    This report documents visual examination and testing conducted in 1999 and early 2000 at the Idaho National Engineering and Environmental Laboratory (INEEL) on a Gesellschaft fuer Nuklear Service (GNS) CASTOR V/21 pressurized water reactor (PWR) spent fuel dry storage cask. The purpose of the examination and testing is to develop a technical basis for renewal of licenses and Certificates of Compliance for dry storage systems for spent nuclear fuel and high-level waste at independent spent fuel storage installation sites. The examination and testing was conducted to assess the condition of the cask internal and external surfaces, cask contents consisting of 21 Westinghouse PWR spent fuel assemblies from Dominion's (formerly named Virginia Power) Surry Power Station and cask concrete storage pad. The assemblies have been continuously stored in the CASTOR cask since 1985. Cask exterior surface and selected fuel assembly temperatures, and cask surface gamma and neutron dose rates were measured. Cask external/internal surfaces, fuel basket components including accessible weldments, fuel assembly exteriors, and primary lid seals were visually examined. Selected fuel rods were removed from one fuel assembly, visually examined, and then shipped to Argonne National Laboratory for nondestructive, destructive, and mechanical examination. Cask interior crud samples and helium cover gas samples were collected and analyzed. The results of the examination and testing indicate the concrete storage pad, CASTOR V/21 cask, and cask contents exhibited sound structural and seal integrity and that long-term storage has not caused detectable degradation of the spent fuel cladding or the release of gaseous fission products between 1985 and 1999

  10. Single nucleotide polymorphisms for assessing genetic diversity in castor bean (Ricinus communis

    Directory of Open Access Journals (Sweden)

    Rabinowicz Pablo D

    2010-01-01

    Full Text Available Abstract Background Castor bean (Ricinus communis is an agricultural crop and garden ornamental that is widely cultivated and has been introduced worldwide. Understanding population structure and the distribution of castor bean cultivars has been challenging because of limited genetic variability. We analyzed the population genetics of R. communis in a worldwide collection of plants from germplasm and from naturalized populations in Florida, U.S. To assess genetic diversity we conducted survey sequencing of the genomes of seven diverse cultivars and compared the data to a reference genome assembly of a widespread cultivar (Hale. We determined the population genetic structure of 676 samples using single nucleotide polymorphisms (SNPs at 48 loci. Results Bayesian clustering indicated five main groups worldwide and a repeated pattern of mixed genotypes in most countries. High levels of population differentiation occurred between most populations but this structure was not geographically based. Most molecular variance occurred within populations (74% followed by 22% among populations, and 4% among continents. Samples from naturalized populations in Florida indicated significant population structuring consistent with local demes. There was significant population differentiation for 56 of 78 comparisons in Florida (pairwise population ϕPT values, p Conclusion Low levels of genetic diversity and mixing of genotypes have led to minimal geographic structuring of castor bean populations worldwide. Relatively few lineages occur and these are widely distributed. Our approach of determining population genetic structure using SNPs from genome-wide comparisons constitutes a framework for high-throughput analyses of genetic diversity in plants, particularly in species with limited genetic diversity.

  11. Glutathione preservation during storage of rat lenses in optisol-GS and castor oil.

    Directory of Open Access Journals (Sweden)

    Thomas Holm

    Full Text Available BACKGROUND: Glutathione concentration in the lens decreases in aging and cataractous lenses, providing a marker for tissue condition. Experimental procedures requiring unfrozen lenses from donor banks rely on transportation in storage medium, affecting lens homeostasis and alterations in glutathione levels. The aim of the study was to examine the effects of Optisol-GS and castor oil on lens condition, determined from their ability to maintain glutathione concentrations. METHODOLOGY/PRINCIPAL FINDINGS: Rat lenses were stored in the two types of storage media at varying time intervals up to 3 days. Glutathione concentration was afterwards determined in an enzymatic detection assay, specific for both reduced and oxidized forms. Lenses removed immediately after death exhibited a glutathione concentration of 4.70±0.29 mM. In vitro stored lenses in Optisol-GS lost glutathione quickly, ending with a concentration of 0.60±0.34 mM after 3 days while castor oil stored lenses exhibited a slower decline and ended at 3 times the concentration. A group of lenses were additionally stored under post mortem conditions within the host for 6 hours before its removal. Total glutathione after 6 hours was similar to that of lenses removed immediately after death, but with altered GSH and GSSG concentrations. Subsequent storage of these lenses in media showed changes similar to those in the first series of experiments, albeit to a lesser degree. CONCLUSIONS/SIGNIFICANCE: It was determined that storage in Optisol-GS resulted in a higher loss of glutathione than lenses stored in castor oil. Storage for more than 12 hours reduced glutathione to half its original concentration, and was considered unusable after 24 hours.

  12. Reproductive responses and productive characteristics in ewes supplemented with detoxified castor meal for a long period

    Directory of Open Access Journals (Sweden)

    Liliane Moreira Silva

    2014-08-01

    Full Text Available The objective of the present study was to evaluate the effects of supplementation with detoxified castor meal (DCM in the diet of ewes during pregnancy, partum, and post-partum on the weight development of their offspring and at slaughter. The study included 56 ewes with synchronized estrus that were naturally mated. At the beginning of pregnancy and in post-partum, hepatic and renal function-related parameters and progesterone levels were measured. At slaughter, the proximate composition and fatty acid profile were determined in the loin of ewes. There was no effect of diet on reproductive response after estrus synchronization. At the beginning of pregnancy, albumin and creatinine levels were lower in the DCM group. Supplementation with DCM did not alter the weight or body condition of ewes at partum. However, at weaning, the DCM group showed a higher loin-eye area (LEA in relation to the group fed diets without detoxified castor meal (WDCM. At partum, as well as at weaning, the offspring of the ewes supplemented with DCM had a larger LEA than the WDCM group. In post-partum, levels of glucose, urea, protein, and cholesterol were lower in the DCM group. The return to cyclicity was similar in both groups, with an average of 47 days after partum. At slaughter, neither anatomical and carcass components nor the results of the proximate analysis were affected by the type of diet, except for an increase in heptadecanoic acid in the DCM group. Supplementation with detoxified castor meal in the diet of ewes does not affect lambing, pregnancy, prolificacy, return to cyclicity, milk production, blood biochemical parameters, or carcass characteristics.

  13. Characteristics and Composition of a High Oil Yielding Castor Variety from Pakistan.

    Science.gov (United States)

    Panhwar, Tarique; Mahesar, Sarfaraz Ahmed; Mahesar, Abdul Waheed; Kandhro, Aftab Ahmed; Talpur, Farah Naz; Laghari, Zahid Hussain; Chang, Abdul Sattar; Hussain Sherazi, Syed Tufail

    2016-01-01

    Keeping in view the versatile applications of castor oil in cosmetic, pharmaceutical and recently as renewable source, the present work is a step towards the commercialization of castor on large scale in Pakistan. The current study introduces a castor variety with high oil content. Initially seeds were physically examined for some physical parameters. Seed moisture, ash content and linear dimensions such as length, width and thickness were found to be 4.53%, 6.44%, 12.24 mm, 8.31 mm and 5.67 mm, respectively. For oil extraction, Soxhlet method was used which resulted in the high oil content 54.0%. For quality assessment of oil, physicochemical parameters were checked according to official standard AOCS methods and compared with ASTM specifications. The determined parameters were as follows; specific gravity 0.953 g/cm(-3), refractive index 1.431, viscosity 672.0 mPas.s, moisture content 0.32%, FFA 0.14%, IV 83.61 gI2/100 g, PV 2.25 meq/Kg and SV 186.0 mgKOH/g. Furthermore, fatty acid analysis of oil showed that, most abundant fatty acid was ricinoleic acid 94.59%, followed by palmitic 0.31%, linoleic 1.84%, oleic (n-9) 2.05%, oleic (n-10) 0.22%, stearic 0.45% and eicosenoic acid 0.53%. The detected fatty acids were compared with registered variety and varieties of other regions. PMID:27250560

  14. Good Practice of Interim Storage of RRSNF1 inside Castor MTR-2 Flasks in Ahaus, Germany

    International Nuclear Information System (INIS)

    In Germany the interim storage of RRSNF (Research Reactor Spent Nuclear Fuel) in away-from-reactor facilities is subject to the Atomic Act, as it is the case for the storage of commercial reactor spent nuclear fuels too. The central storage facilities in Germany, such as Ahaus, are usually licensed in accordance to the atomic law for a period of 40 years, after having undergone a thorough application procedure referring to all applicable nuclear safety aspects and subsidiary regulations. The Ahaus facility was built between 1984 and 1989. It was first licensed in 1987, and in 1997, it successfully underwent a re-licensing procedure, obtaining a valid licence until 2036. It is a dry storage facility for spent nuclear fuel loaded in transport and storage flasks. It has been designed and licensed for a capacity of 420 LWR flasks. In 2005, 18 CASTOR MTR2 flasks with RRSNF from VKTA Rossendorf were shipped to Ahaus. They were stored amongst 305 CASTOR THTR/AVR flasks containing spherical fuel elements from the decommissioned Thorium-High-Temperature-Reactor from Hamm-Uentrop. The CASTOR MTR2 is a smaller version of the dual purpose flask concept suitable for transport and storage, specially designed for research reactor spent fuel elements. It fulfils the long term storage as well as the international transportation safety requirements. Particular attention is paid to quality assurance during flask manufacturing and surveillance also on quality control of the proper technical function during the entire storage phase, and of course on safeguards. Furthermore, an integrated management system, that covers all aspects of quality, safety and the protection of health and environment has been established, and supports the management by the classical structural organization and personal responsibilities. Internal and external audits contribute to a high level management performance. In 2007, the facility took part in a WENRA (Western European Nuclear Regulator's Association

  15. Transesterification of castor oil usingMgO/SiO2 catalyst and coconutoilas co-reactant

    OpenAIRE

    Kamisah D. Pandiangan; Novesar Jamarun; Syukri Arief; Wasinton Simanjuntak

    2016-01-01

    This paper describes the transesterification of castor oil with the use of coconut oil as co-reactant and MgO/SiO2as heterogeneous base catalyst. The catalyst was preparedfrom rice husk silica and magnesium nitrate by sol-gel method, with MgO load of 20% relative to silica, and then subjected to sintering treatment at 600 oC for 6 hours. A series of experiments was carried out, indicating that the use of coconut oil as co-reactant significantly promoted the conversion of castor oil into b...

  16. Development of Castor Oil Based Poly(urethane-esteramide)/TiO2 Nanocomposites as Anticorrosive and Antimicrobial Coatings

    OpenAIRE

    Mohammed Rafi Shaik; Manawwer Alam; Naser M. Alandis

    2015-01-01

    Castor oil based polyesteramide (CPEA) resin has been successfully synthesized by the condensation polymerization of N-N-bis (2-hydroxyethyl) castor oil fatty amide (HECA) with terephthalic acid and further modified with different percentages of 7, 9, 11, and 13 wt.% of toluene-2,4-diisocyanate (TDI) to obtain poly(urethane-esteramide) (UCPEA), via addition polymerization. TiO2 (0.1, 0.2, 0.3, 0.4, and 0.5 wt%) nanoparticles were dispersed in UCPEA resin. The structural elucidation of HECA, C...

  17. Castor oil increases intestinal formation of platelet-activating factor and acid phosphatase release in the rat.

    OpenAIRE

    Pinto, A; Calignano, A; Mascolo, N; Autore, G; Capasso, F

    1989-01-01

    1. When castor oil was administered by gavage to rats, the duodenum and jejunum but not ileum and colon produced large amounts (5-6 fold greater than control) of platelet activating factor (Paf). 2. Intraluminal release of acid phosphatase (AP) was also markedly increased (5-6 fold greater than control) in the duodenum and jejunum of castor oil-treated rats and there was a correlation between the elevated release of AP and intestinal hyperaemia. 3. These findings support a role for Paf as a m...

  18. Formulasi Lipstik Menggunakan Kombinasi Minyak Biji Anggur (Grapeseed Oil) Dan Minyak Jarak (Castor Oil) Sebagai Pelarut Zat Warna Sintetis

    OpenAIRE

    Mahyuni, Sri

    2015-01-01

    Background: Lipstick is a cosmetical availability used to color the lips by artistic touch in improving the esthetic of facial make-up. The lipstick is a lip colorer packaged in stick form made of wax, oil and fat. Castor oil is the components of lipstick used that usually a dye solvent, but the result is less good. Therefore, it was combined with grapeseed oil. Objective: The objective of research was to make the formula of lipstick using combination grapeseed oil and castor oil as a sol...

  19. Yield of castor bean fertilized with sewage sludge and potassium and magnesium sulphate

    OpenAIRE

    Thâmara F. M. Cavalcanti; Geraldo R. Zuba; Regynaldo A. Sampaio; João P. Carneiro; Ely S. A. de Oliveira; Márcio N. Rodrigues

    2015-01-01

    ABSTRACTThe aim of this study was to evaluate the yield and nutrition of castor bean in response to fertilization with sewage sludge and potassium (K) and magnesium (Mg) sulphate. The experiment was carried out from January to July 2011. The treatments, in a randomized block design with three replicates, in a Nitosol, corresponded to a factorial scheme (2 x 4 +1): two doses of K and Mg sulphate combined with four doses of sewage sludge (0, 2.60, 5.20 and 10.40 t ha-1, dry basis), applied base...

  20. Aluminum and steel adhesion with polyurethanes from castor oil adhesives submitted to gamma irradiation

    International Nuclear Information System (INIS)

    Polyurethanes adhesive from castor oil is used to join aluminum and steel pieces. The effect of gamma radiation on the resistance to tension tests is investigated. The aluminum and steel pieces after being glued with the adhesive were submitted to gamma irradiation in doses of 1 kGy, 25 kGy and 100 kGy. The rupture strength of the joints after irradiation have a slightly increase or remains practically unchanged indicating that the adhesive properties is not affected by the gamma radiation. (author)

  1. GNS experience of CASTOR cask loading for storage and transport of spent fuel assemblies

    International Nuclear Information System (INIS)

    With over 25 years of experience in the design, manufacturing, assembly and loading of CASTOR registered casks, GNS is one of the worldwide leading suppliers of casks for the transport and storage of spent fuel assemblies as well as for canisters with vitrified high level wastes. GNS products are used at around 30 sites worldwide for a wide range of inventories from pressurized and boiling water reactor fuels (PWR and BWR), thorium high-temperature reactor fuels (THTR) and research reactor fuels to vitrified high-active wastes (HAW) from reprocessing plants

  2. Kinematics Modeling of an Omnidirectional Autonomous Mobile Robot with Castor Wheels

    Institute of Scientific and Technical Information of China (English)

    Peng Yiqiang

    2006-01-01

    The kinematics model of an omnidirectional wheeled mobile robot (WMR) platform with 3 castor wheels was built, which includes the actuated inverse solution and the sensed forward solution. Motion simulations verify the consistency between the actuated inverse solution and the sensed forward solution. Analysis results show that the WMR possesses 3 degrees of freedom, and its motion trajectory is a straight line. The "pushing" and "pulling" motion patterns of the WMR can be generated by using different wheel orientations. It can be used in the places where the space is limited.

  3. Production and characterization of biodiesel using nonedible castor oil by immobilized lipase from Bacillus aerius.

    Science.gov (United States)

    Narwal, Sunil Kumar; Saun, Nitin Kumar; Dogra, Priyanka; Chauhan, Ghanshyam; Gupta, Reena

    2015-01-01

    A novel thermotolerant lipase from Bacillus aerius was immobilized on inexpensive silica gel matrix. The immobilized lipase was used for the synthesis of biodiesel using castor oil as a substrate in a solvent free system at 55°C under shaking in a chemical reactor. Several crucial parameters affecting biodiesel yield such as incubation time, temperature, substrate molar ratio, and amount of lipase were optimized. Under the optimized conditions, the highest biodiesel yield was up to 78.13%. The characterization of synthesized biodiesel was done through FTIR spectroscopy, (1)H NMR spectra, and gas chromatography. PMID:25874205

  4. Meat quality assessment from young goats fed for long periods with castor de-oiled cake.

    Science.gov (United States)

    Oliveira, C H A; Silva, A M; Silva, L M; van Tilburg, M F; Fernandes, C C L; Moura, A A; Moreno, F B M B; Monteiro-Moreira, A C O; Moreira, R A; Bezerra, F J; Rondina, D

    2015-08-01

    Diet can influence both the qualitative and quantitative traits of ruminant meat. This study evaluated the effects of castor de-oiled cake on the meat of mixed-breed male goat kids. After 165days of diet treatment, no alterations (p>0.05) were observed in the in vivo performance, anatomic components, dissection and proximate composition of the Longissimus dorsi muscle, as well as in the color and pH of the carcasses. However, diet had an effect (pgoats led to alterations in meat quality, without compromising its consumption qualities. PMID:25866931

  5. Role of runaway electrons in LHCD regimes with improved confinement on the CASTOR tokamak

    Energy Technology Data Exchange (ETDEWEB)

    Voitsekhovich, I. [Kurchatov Institute, Moscow (Russian Federation); Stoeckel, J.; Zacek, F. [Akademie Ved Ceske Republiky, Prague (Czech Republic). Ustav Fyziky Plazmatu

    1993-12-31

    Lower hybrid current drive (LHCD) experiments in low density plasmas on ASDEX, CASTOR, WT-3, VERSATOR and HT-6B tokamaks demonstrated an improvement of the particle confinement at moderate lower hybrid powers (P{sub LH}). Moreover, the experiments have shown that a reduction of edge electrostatic fluctuations is probably responsible for this effect. However, the mechanism behind the reduction of fluctuations has remained unclear. Here we try to explain the reduction of fluctuations by enhanced population and non-ambipolar losses of runaway electrons with LHCD. (author) 8 refs., 3 figs.

  6. Characterization and Utilization of castor bean seed oil extract for production of medicated soap.

    OpenAIRE

    Abdulrasheed A; Aroke U. O; Muazu M.T.

    2015-01-01

    The research work is to investigate the potential utilization of castor bean seed oil extract in the production of medicated soap. The oil was extracted via soxhlet extractor using hexane as solvent. The characterization analysis reveals the acid value and saponification value of the oil which were between the ranges of values specified by ASTM. The soap produced gave a pH of (8.9), foam height (16cm), alcohol insoluble (3.45%), moisture content (4.2%) and free acidity of (0.10). The antibact...

  7. Evaluation of the properties of iron oxide-filled castor oil polyurethane

    OpenAIRE

    Eleonora Mussatti; Claudia Merlini; Guilherme Mariz de Oliveira Barra; Saulo Güths; Antonio Pedro Novaes de Oliveira; Cristina Siligardi

    2013-01-01

    The aim of this study was to obtain and evaluate the electrical, thermal and mechanical properties of iron oxide-filled castor oil polyurethane (PU/Fe2O3). The iron oxide used in this study was a residue derived from the steel pickling process of a Brazilian steel rolling industry. Polymeric composites with different iron oxide volume fractions (2.5, 5.0, 7.5, 10.0 and 12.5%) were prepared through the casting process followed by compression molding at room temperature. The composites were ana...

  8. Study of very forward jets at 13 TeV with the CASTOR calorimeter of CMS

    International Nuclear Information System (INIS)

    The CASTOR calorimeter of CMS measures QCD jets at pseudorapidities -5.2 ≥ η ≥ -6.6. Due to this unique very forward acceptance, such data is very discriminating for hadronic event generators. In particular since values of Bjorken-x down to 10-6 are probed. In preparation for the upcoming LHC Run 2 at √(s) = 13 TeV, a Monte Carlo study of such jets is presented, including full detector simulation with GEANT4. We investigate methods of data- and Monte Carlo-driven jet energy corrections. First results of pt-balancing and detector unfolding are presented.

  9. Measurement of electron temperature and density by Thomson scattering diagnostic on the Tokamak CASTOR

    International Nuclear Information System (INIS)

    A new Thomson scattering diagnostics is being built on the tokamak CASTOR. The source of the light is a high-power pulsed ruby laser (10 J in one 10 - 20 ns pulse). The detection system is composed from a monochromator with ten photomultipliers. Included is a brief introduction to the physical principle of this method. The designed experimental setup of the diagnostic and its key elements are shown. The calculations of the overall efficiency of the detection system are presented and discussed. (author)

  10. Validation of certificates for Type B(U)F transport and storage casks of CASTOR type

    International Nuclear Information System (INIS)

    GNB has profound practical experiences with validations of Type B(U)F certificates for CASTOR casks around the world. There are big differences in the approach of the competent authorities concerning the amount of documents needed for a validation and in the approach to the evaluation of these documents which all have been already evaluated by the competent authority of the country of origin. This holds in general for ADR member states and other countries. Examples showing the scope of differences are given and propositions for a uniform approach are presented. (author)

  11. Synthesis of colloids based on gold nanoparticles dispersed in castor oil

    International Nuclear Information System (INIS)

    New colloidal solutions of gold nanoparticles (AuNP), using castor oil as a nontoxic organic dispersant agent, were prepared via three different methods. In all three cases, tetrachloroauric(III) acid was employed as the gold source. The colloids were characterized by UV-Vis spectroscopy and transmission electron microscopy (TEM). The AuNP produced by the three methods were quasispherical in shape, however with different average sizes. The individual characteristics of the nanoparticles presented in each colloidal system were also confirmed by observation of absorption maxima at different wavelengths of visible light. Each method of synthesis leads to colloids with different grades of stability with respect to particle agglomeration.

  12. Castor industry development:from cultivation to product exploitation%蓖麻产业发展:从种植到利用

    Institute of Scientific and Technical Information of China (English)

    孙振钧; 吕丽媛; 伍玉鹏

    2012-01-01

    蓖麻作为世界十大油料作物之一,具有很高的开发利用价值。本文从产业发展的角度,综述了蓖麻种植的历史和高产栽培技术现状,分析了蓖麻利用特别是蓖麻基生物燃油及蓖麻深加工产品的研发现状及发展趋势。论述了蓖麻的耐盐性及蓖麻栽培对盐碱地的修复作用,并结合我国边际土地的情况,分析了我国种植蓖麻的潜力。据此提出我国蓖麻研究及产业发展的重点为:蓖麻适宜种植区调查与区划、种质资源调查与创新、低质非耕土壤蓖麻高产栽培技术研究、蓖麻基生物燃油制备工艺研究、蓖麻综合利用研究和蓖麻产业可持续发展及保障系统研究。%As one of the world's ten largest oil crops,castor has broad utilization prospects based on its high economic value.This paper analyzes the current situation of high-yielding castor cultivation technology,summarizes the comprehensive utilization of castor and describes the development of castor biodiesel fuel.Castor salt resistance and the remediation of saline-alkali soil by castor cultivationis are also discussed,as well as the potential of China's cultivation of castor.In this paper,recommendation for castor research and industrial development were also proposed,including the castor surrey and zoning in suitable planting area,the investigation and innovation of germplasm resources,high-yielding cultivation technology of castor in low quality and non-farming soil,preparation process of castor biodiesel fuel,comprehensive utilization research of castor,sustainable development and security system of castor industry.

  13. Influence of the organic matter and soil water deficit on the castor bean absolute growth rate

    Energy Technology Data Exchange (ETDEWEB)

    Lacerda, Rogerio Dantas de; Guerra, Hugo O. Carvallo; Chaves, Lucia Helena G. [Universidade Federal de Campina Grande (UAEAg/UFCG), PB (Brazil). Unidade Academica de Engenharia Agricola; Araujo, Ester Luiz de; Nascimento, Elka Costa Santos; Barros Junior, Genival [Universidade Federal de Campina Grande (UFCG), PB (Brazil)

    2008-07-01

    Even when under low precipitations conditions, the castor bean production decrease, it constitutes a very good alternative. It has an elevated economical importance, because from the plant it is used their leaves, stem and seeds. From the stem it is obtained cellulose for the paper industry, from the leaves textile products and from the seeds oil and tort. The oil is the only glycerin soluble in alcohol and the base for several industrial products such as the biodiesel. The objective of the present work was to study the effect of different soil water and soil organic matter on the castor bean, BRS 188 cultivar rate growth. The experiment was conducted from April to August 2006 under greenhouse conditions using a randomized block 2x4 factorial design with two soil organic mater content (5.0 g.kg{sup -1} e 25.0 g.kg{sup -1}), four levels of available water (100, 90, 80 e 70% ) and three replicates. For this, 24 plastic containers, 75 kg capacity, were used on which was grown one plant 120 days after the seedling. At regular intervals the plant height was measured and the results analyzed statistically. For the qualitative treatments (with and without organic matter) the treatment means were compared through the Tukey test. For the quantitative ones (water levels) regressions were used. It was observed that both, organic matter and available water for plants proportionated benefit effects to the growth rate of the plant. (author)

  14. Effect of the organic matter and soil water deficit on the castor bean inflorescences emission

    Energy Technology Data Exchange (ETDEWEB)

    Lacerda, Rogerio Dantas de; Araujo, Ester Luiz de; Nascimento, Elka Costa Santos; Barros Junior, Genival [Universidade Federal de Campina Grande (UFCG), PB (Brazil); Guerra, Hugo O. Carvallo; Chaves, Lucia Helena G. [Universidade Federal de Campina Grande (UAEAg/UFCG), PB (Brazil). Unidade Academica de Engenharia Agricola

    2008-07-01

    The castor bean culture has become important due to the several applications of its oil, which constitutes one of the best row materials for biodiesel manufacturing, and the base for several other industrial products. The objective of the present work was to study the effect of different soil water and soil organic matter on the castor bean inflorescence emission. The experiment was conducted from April to August 2006 under Greenhouse conditions using a randomized block 2x4 factorial design with two soil organic mater content (5.0 g.kg{sup -1} e 25.0 g.kg{sup -1}), four levels of available water (100, 90, 80 e 70% ) and three replicates. For this, 24 plastic containers, 75 kg capacity, were used on which was grown one plant 120 days after the seedling. When flowering occurred it was measured the number, the time required for the emission and the height of the emissions. The results were analyzed statistically; for the qualitative factor (with and without organic matter) the treatment means were compared through the Tukey test. For the quantitative ones (water levels) regressions were used. The time for the emission of the inflorescences was affected significantly by the organic matter and the available soil water content for plants. The number of inflorescences was affected positively by both treatments. (author)

  15. Green superlubricity of Nitinol 60 alloy against steel in presence of castor oil

    Science.gov (United States)

    Zeng, Qunfeng; Dong, Guangneng; Martin, Jean Michel

    2016-07-01

    In the present work, first, we show that sliding Nitinol 60 alloy against steel under castor oil lubrication exhibits a new case of superlubricity (coefficient of friction CoF ≪ 0.01). So far, CoF below 0.01 have never been achieved under boundary lubrication at high contact pressure and in presence of vegetable oil as a green lubricant. Next, it is demonstrated that superlubricity is controlled by tribochemical reactions, involving chemical degradation of castor oil and the formation of metal oxy-hydroxides. Finally, to explain these findings, we propose a novel superlubricity mechanism consisting of hexanoic acid molecules intercalated between nickel and iron oxy-hydroxide lamellar layers, a structure very similar to the one found in Fe-Ni batteries. We propose that superlubricity is achieved due to repulsive electrostatic forces acting between the intercalated metal oxy-hydroxide lamellar compounds. This system would be suitable for practical engineering applications in many fields including biotechnologies.

  16. Castor-1C spent fuel storage cask decay heat, heat transfer, and shielding analyses

    International Nuclear Information System (INIS)

    This report documents the decay heat, heat transfer, and shielding analyses of the Gesellschaft fuer Nuklear Services (GNS) CASTOR-1C cask used in a spent fuel storage demonstration performed at Preussen Elektra's Wurgassen nuclear power plant. The demonstration was performed between March 1982 and January 1984, and resulted in cask and fuel temperature data and cask exterior surface gamma-ray and neutron radiation dose rate measurements. The purpose of the analyses reported here was to evaluate decay heat, heat transfer, and shielding computer codes. The analyses consisted of (1) performing pre-look predictions (predictions performed before the analysts were provided the test data), (2) comparing ORIGEN2 (decay heat), COBRA-SFS and HYDRA (heat transfer), and QAD and DOT (shielding) results to data, and (3) performing post-test analyses if appropriate. Even though two heat transfer codes were used to predict CASTOR-1C cask test data, no attempt was made to compare the two codes. The codes are being evaluated with other test data (single-assembly data and other cask data), and to compare the codes based on one set of data may be premature and lead to erroneous conclusions

  17. Energetic characterization of the husk of the castor bean fruits of the variety Guarani

    Energy Technology Data Exchange (ETDEWEB)

    Teramoto, Erico Tadao; Sousa, Frederico Faula; Castro Neto, Pedro [Universidade Federal de Lavras (DEG/UFLA), MG (Brazil). Dept. de Engenharia; Trugilho, Paulo Fernando [Universidade Federal de Lavras (DCF/UFLA), MG (Brazil). Dept. de Ciencias Florestais; Fraga, Antonio Carlos [Universidade Federal de Lavras (DAG/UFLA), MG (Brazil). Dept. de Agricultura; Nunes, Ramon Rachide [Universidade Federal de Lavras (DAG/UFLA), MG (Brazil). Dept. de Quimica

    2008-07-01

    The knowledge of the physical properties and of the calorific power and of the immediate chemical analysis certain products are interesting for the development of new technologies and equipment for your processing or use as fuel. This way, due to the scarce readiness of referring works for the husk of the castor bean fruits, the present study seeks complemental the available data in the literature. For such were certain the following properties of the husk of the castor bean fruits of variety Guarani: angle of repose, hectolitre weigh, moisture, ash content, volatile material content, fixed carbon content and superior calorific power and inferior calorific power. The following values were found: 42 deg for the angle of repose, 13.92 kg for the hectolitre weight, 4223.19 kcal/kg for the superior calorific power, 3829.92 kcal/kg for the inferior calorific power, 8.21% for the moisture, 9.86% for the ash content, 73.67% for the volatile material content and 8.26% for the fixed carbon content. (author)

  18. Performance evaluation of a diesel engine fueled with methyl ester of castor seed oil

    Directory of Open Access Journals (Sweden)

    G.DURGA DEVI

    2012-07-01

    Full Text Available Diesel engines are widely used as power sources in medium and heavy-duty applications because of their lower fuel consumption and lower emissions of carbon monoxide (CO and unburned hydrocarbons (HC compared with gasoline engines. Rudolf Diesel, the inventor ofthe diesel engine, ran an engine on groundnut oil at the Paris Exposition of 1900. Since then, vegetable oils have been used as fuels when petroleum supplies were expensive or difficult to obtain. With the increased availability of petroleum in the 1940s, research into vegetable oils decreased. Since the oil crisis of the 1970s research interest has expanded in the area of alternative fuels. The difficulties associated with using raw vegetable oils in diesel engines identified in the literature are injector coking, severe engine deposits, filter gumming problems, piston ring sticking, and injector coking and thickening of the lubricating oil. The highviscosity and low volatility of raw vegetable oils are generally considered to be the major drawbacks for their utilization as fuels in diesel engines. Castor methyl ester (CME blends showed performance characteristics close to diesel. Therefore castor methylester blends can be used in CI engines in rural area for meeting energy requirement in various agricultural operations such as irrigation, threshing, indistries etc.

  19. Synthesis of biodiesel from castor oil: Silent versus sonicated methylation and energy studies

    International Nuclear Information System (INIS)

    Highlights: • Sonicated transesterification leads to higher conversion than conventional one. • Energy consumption required by conventional and ultrasound-assisted transesterification was compared. • Ultrasound-assisted methylation is more competitive in terms of energy than conventional one. - Abstract: In recent years, biodiesel is evolving to be one of the most employed biofuels for partial replacement of petrodiesel. The most widely used feedstocks for biodiesel production are vegetable oils. Among them, castor oil presents two interesting features as biodiesel raw material; on one hand, it does not compete with edible oils; on the other, the cultivar does not require high inputs. In this research, a comparison between conventional and ultrasound-assisted transesterification was carried out in terms of castor oil methyl ester (COME) yield and energy efficiency. Results show that sonicated transesterification leads to higher COME yields under lower methanol-to-oil molar ratio, lower amount of catalyst, shorter reaction time and lower amount of energy required. Ultrasound-assisted transesterification parameters were optimized resulting in the following optimum conditions: 20 kHz fixed frequency, 70% duty cycle, 40% sonication amplitude, 4.87 methanol-to-oil molar ratio, 1.4% w/w amount of catalyst and 3 sonication cycles (3 min 48 s) that provided 86.57% w/w COME yield. The energy required along each type of transesterification was measured leading to the conclusion that sonicated transesterification consumes a significant lower amount of energy than conventional one, thus achieving higher COME yield

  20. Quivers For Special Fuel Rods-Disposal Of Special Fuel Rods In CASTOR V Casks

    Energy Technology Data Exchange (ETDEWEB)

    Bannani, Amin; Cebula, Wojciech; Buchmuller, Olga; Huggenberg, Roland [GNS, Essen (Germany); Helmut Kuhl [WTI, Julich (Germany)

    2015-05-15

    While GNS casks of the CASTOR family are a suitable means to transfer fuel assemblies (FA) from the NPP to an interim dry storage site, Germanys phase-out of nuclear energy has triggered the demand for an additional solution to dispose of special fuel rods (SFR), normally remaining in the fuel pond until the final shutdown of the NPP. SFR are fuel rods that had to be removed from fuel assemblies mainly due to their special condition, e. g. damages in the cladding of the fuel rods which may have occurred during reactor operations. SFR are usually stored in the spent fuel pond after they are removed from the FA. The quiver for special fuel rods features a robust yet simple design, with a high mechanical stability, a reliable leak-tightness and large safety margins for future requirements on safety analysis. The quiver for special fuel rods can be easily adapted to a large variety of different damaged fuel rods and tailored to the specific need of the customer. The quiver for special fuel rods is adaptable e.g. in length and diameter for use in other types of transport and storage casks and is applicable in other countries as well. The overall concept presented here is a first of its kind solution for the disposal of SFRs via Castor V-casks. This provides an important precondition in achieving the status 'free from nuclear fuel' of the shut down German NPPs.

  1. Phosphorylation of glyoxysomal malate synthase from castor oil seed endosperm and cucumber cotyledon

    International Nuclear Information System (INIS)

    Glyoxysomal malate synthase (MS) was purified to apparent homogeneity from 3-d germinating castor oil seed endosperm by a relatively simple procedure including two sucrose density gradient centrifugations. Antibodies raised to the caster oil seed MS crossreacted with MS from cucumber cotyledon. MS was phosphorylated in both tissues in an MgATP dependent reaction. The phosphorylation pattern was similar for both enzymes and both enzymes were inhibited by NaF, NaMo, (NH4)SO4, glyoxylate and high concentration of MgCl2 (60 mM), but was not inhibited by NaCl and malate. Further characterization of the phosphorylation of MS from castor oil seed endosperms showed that the 5S form of MS is the form which is labelled by 32P. The addition of exogenous alkaline phosphatase to MS not only decreased enzyme activity, but could also dephosphorylate phospho-MS. The relationship between dephosphorylation of MS and the decrease of MS activity is currently under investigation

  2. Polyurethane and polyurea nanoparticles based on polyoxyethylene castor oil derivative surfactant suitable for endovascular applications.

    Science.gov (United States)

    Morral-Ruíz, Genoveva; Melgar-Lesmes, Pedro; García, María Luísa; Solans, Conxita; García-Celma, María José

    2014-01-30

    The design of new, safe and effective nanotherapeutic systems is an important challenge for the researchers in the nanotechnology area. This study describes the formation of biocompatible polyurethane and polyurea nanoparticles based on polyoxyethylene castor oil derivative surfactant formed from O/W nano-emulsions by polymerization at the droplet interfaces in systems composed by aqueous solution/Kolliphor(®) ELP/medium chain triglyceride suitable for intravenous administration. Initial nano-emulsions incorporating highly hydrophilic materials were prepared by the phase inversion composition (PIC) method. After polymerization, nanoparticles with a small particle diameter (25-55 nm) and low polydispersity index were obtained. Parameters such as concentration of monomer, O/S weight ratio as well as the polymerization temperature were crucial to achieve a correct formation of these nanoparticles. Moreover, FT-IR studies showed the full conversion of the monomer to polyurethane and polyurea polymers. Likewise the involvement of the surfactant in the polymerization process through their nucleophilic groups to form the polymeric matrix was demonstrated. This could mean a first step in the development of biocompatible systems formulated with polyoxyethylene castor oil derivative surfactants. In addition, haemolysis and cell viability assays evidenced the good biocompatibility of KELP polyurethane and polyurea nanoparticles thus indicating the potential of these nanosystems as promising drug carriers. PMID:24275445

  3. Sugarcane bagasse and castor oil polyurethane adhesive-based particulate composite

    Directory of Open Access Journals (Sweden)

    Juliano Fiorelli

    2013-04-01

    Full Text Available This paper discusses the potential use of sugarcane bagasse in two different fiber lengths (5 mm and 8 mm of the same density as a raw material for the production of particleboards, using castor oil-based two-component polyurethane adhesive. The quality of the product that can be manufactured industrially was evaluated based on density, thickness swell (TS, absorption (WA, modulus of elasticity (MOE, modulus of rupture (MOR in static bending and internal bond (IB, according to the Brazilian NBR 14.810:2006 standard. The results revealed a significant difference between the particleboards made with 5-mm-long fibers and those made with 8-mm-long fibers. An analysis by scanning electron microscopy (SEM indicates that the interparticle spaces are filled with castor oil-based two-component polyurethane adhesive, contributing to improve the physicomechanical properties of the particleboards. A durability assessment based on accelerated aging tests shows that waterproofed particleboards can be used in moist environments.

  4. [Analysis of Trace Inorganic Elements in Castor Oil by Inductively Coupled Plasma Mass Spectrometry].

    Science.gov (United States)

    Li, Tan-ping; Xie, Hua-lin; Nie, Xi-du

    2015-10-01

    A method for the determination of Na, Mg, Si, P, K, Ca, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Sr, Mo, Cd, Hg and Pb in castor oil after direct dilution with ethanol by inductively coupled plasma mass spectrometry (ICP-MS) was established. The sample was diluted by ethanol before ICP-MS determination. The condensation and deposition of high concentrations of carbon in mass cone interface and ion lens, which will decrease the sensitivity of element analysis, were avoided effectively by introducing O2 to plasma. The mass spectral interferences were eliminated by octopole reaction system (ORS). The matrix effects were calibrated to using Sc, Ge, Rh and Ir as internal standard elements. Au standard solution, which could form amalgam alloy with Hg, was dropped to eliminate the memory effect of Hg. The results show that the correlation coefficient for analyte is no less than 0.999 5, the detection limits is in the range of 0.06 - 20.1 ng x L(-1), the recovery is in the range of 990.4% - 110.2%, and the RSD is less than 4.8%. This method was very fast, simple and accurate to simultaneously analyze multi-elements in castor oil. PMID:26904837

  5. Enhanced accumulation of Cd in castor (Ricinus communis L) by soil-applied chelators.

    Science.gov (United States)

    Chhajro, Muhammad Afzal; Rizwan, Muhammad Shahid; Guoyong, Huang; Jun, Zhu; Kubar, Kashif Ali; Hongqing, Hu

    2016-07-01

    Phytoextraction has been identified as one of the most propitious methods of phytoremediation. This pot experiment were treated with varying amounts of (ethylenediamine triacetic acid) EDTA 3-15, (Nitriloacetic acid) NTA 3-10, (Ammonium citrate) NH4 citrate 10 - 25 mmol and one mg kg(-1)Cd, filled with 5 kg soil. The addition of chelators significantly increased Cd concentration in soil and plant. The results showed that maximum Cd uptake was noted under root, shoot and leaf of castor plant tissue (2.26, 1.54, and 0.72 mg kg(-1)) under EDTA 15, NTA 10, and NH4 citrate 25 mmol treatments respectively, and in soil 1.08, 1.06 and 0.52 mg kg(-1) pot(-1) under NH4 citrate 25, NTA 10 and EDTA 15 mmol treatments respectively, as against to control (p EDTA 15 mmol as compared to other treatments, However, Bioconcentration factor (BCF), translocation factor (TF) and remediation factor (RF) were significantly increased under EDTA 15 and NH4 citrate 25 mmol as against control. Our results demonstrated that castor plant proved satisfactory for phytoextraction on contaminated soil, and EDTA 15 and NH4 citrate 25 mmol had the affirmative effect on the Cd uptake in the artificial Cd-contaminated soil. PMID:26588431

  6. Population genetic structure in natural and reintroduced beaver (Castor fiber populations in Central Europe

    Directory of Open Access Journals (Sweden)

    Kautenburger, R.

    2008-12-01

    Full Text Available Castor fiber Linnaeus, 1758 is the only indigenous species of the genus Castor in Europe and Asia. Due to extensive hunting until the beginning of the 20th century, the distribution of the formerly widespread Eurasian beaver was dramatically reduced. Only a few populations remained and these were in isolated locations, such as the region of the German Elbe River. The loss of genetic diversity in small or captive populations throughgenetic drift and inbreeding is a severe conservation problem. However, the reintroduction of beaver populations from several regions in Europe has shown high viability and populations today are growing fast. In the present study we analysed the population genetic structure of a natural and two reintroduced beaver populations in Germany and Austria. Furthermore, we studied the genetic differentiation between two beaver species, C. fiber and the American beaver (C. canadensis, using RAPD (Random Amplified Polymorphic DNA as a genetic marker. The reintroduced beaver populations of different origins and the autochthonous population of the Elbe River showed a similar low genetic heterogeneity. There was an overall high genetic similarity in the species C. fiber, and no evidence was found for a clear subspecific structure in the populations studied.

  7. Dry storage of the BR3 spent fuel in the Castor BR3 cask

    Energy Technology Data Exchange (ETDEWEB)

    Ooms, L.; Massaut, V.; Noynaert, L. [SCK/CEN, B-2400 Mol (Belgium); Braeckeveldt, M. [Niras/Ondraf, B-1210 Brussels (Belgium)

    2001-07-01

    Twenty-five years of operation has resulted in an inventory of spent fuel with a wide variety in the BR3 nuclear pilot power plant. Studies were launched to evaluate all possible solutions for the BR3 experimental and 'exotic' spent fuel, i.e. reprocessing, dry storage in containers and dry storage in canisters. For the BR3 spent fuel the interim dry storage in Castor BR3 containers was chosen. The present paper describes in a first part the history and characteristics of the spent fuel. A second part handles with the different options, which were studied for the spent fuel evacuation. The last part focuses on the spent fuel preparation and the production of the Castor BR3. This project allowed the SCK-CEN to build up an important know-how in the field of spent fuel management, especially the management of research reactor fuel, which is very specific and not comparable with spent fuel of commercial nuclear power plants. (author)

  8. A Comparative Experimental Analysis of Tribological Properties Between Commercial Mineral Oil and Neat Castor Oil using Taguchi Method in Boundary Lubrication Regime

    Directory of Open Access Journals (Sweden)

    S. Bhaumik

    2016-03-01

    Full Text Available The present work aims to carry out a comparative experimental analysis of tribological properties of 372cSt mineral oil and 229cSt castor oil. The antiwear and extreme pressure properties of both the oils have been analysed according to ASTM G 99 and ASTM D-2783 standards. The surfaces of the balls and pins after tribo tests have been analysed using Scanning Electron Microscope (SEM images. The present test results predict that the antiwear and extreme pressure properties in case of the selected commercially available mineral oil are better than neat castor oil. Both coefficient of friction and frictional force increased by 16-42 % and 16-35 % respectively in case of neat castor oil as compared with that of the mineral oil. The load carrying capacity in case of mineral oil has been found to be 250 kg while in case of castor oil it has been found to be 126 kg. SEM images show a higher plastic deformation in case of castor oil as compared to the mineral oil. Both mineral oil and castor oil showed surface deteriorations and increase in roughness after 40 hrs of intermittent running during scuffing test. Thus, the present investigation indicates that the tribological properties of neat castor are inferior to that of mineral oil although close observation of the results shows that both AW and EP properties of neat castor oil are much closer to that of commercial mineral oil. Thus, the present work would help in formulating castor oil based new bio lubricants with better anti wear and extreme pressure properties

  9. Computer simulation of 3D steady and 2D transient loading of CASTOR 440/84 using FEM

    International Nuclear Information System (INIS)

    The system of computer codes, developed at the NRI Rez, plc. for the CEZ a.s. company, is described, aimed to the realistic best estimate evaluations of the temperature field in the CASTOR 440/84 container, which is used for the Dukovany NPP spent fuel. (author)

  10. Castor Oil Functional Reaction Review%蓖麻油多官能团反应进展

    Institute of Scientific and Technical Information of China (English)

    张海飞; 朱新宝

    2015-01-01

    蓖麻油分子中含有羟基、酯基、烯键等官能团,其中二种或三种官能团组合能进行一系列化学反应,已合成出许多新的蓖麻油衍生物,开发出很多新的用途,现对其系列化学反应进行综述归类,系统地介绍蓖麻油多官能团组合所能发生的反应,简述不同反应产物的多种用途,便于新反应的设计和新产品的开发,提高蓖麻油深加工技术。%Castor oil molecules contain functional groups such as hydroxyl,ester group,ethylenic bond,two or three kinds of functional groups can perform a series of chemical reactions,which form many new castor oil deriva-tives,and develop many new application,now the series of chemical reactions were reviewed and classified,authors systematically introduced the reaction of castor oil and briefly described different a variety of purposes of product,to facilitate the design of the new reaction and the development of new products,to improve the castor oil deep process-ing technology.

  11. Photosynthetic pigments and gas exchange in castor bean under conditions of above the optimal temperature and high CO2

    Directory of Open Access Journals (Sweden)

    Fabiola França Silva

    2015-08-01

    Full Text Available The castor bean plant, a Euphorbiaceae oil seed C3-metabolism rustic and drought-resistant plant, is cultivated in a wide range of environments due to its good adaptive capacity. However, given the current environmental changes, many biochemical and physiological impacts may affect the productivity of important crops, such as castor bean. This work aimed to evaluate the impacts of the castor bean gas exchange in response to high temperature and increased CO2concentration.Our experiment was conducted in a phytotron located at Embrapa Algodão in 2010. We adopted a completely randomized design, with four treatments in a factorial combination of two temperatures (30/20 and 37/30°C and two CO2 levels (400 and 800 mmol L-1; four replications were performed, obtained in five surveys over the growth cycle, for a total of 80 sample units. An infrared gas analyzer (IRGA - Infra Red Gas Analyzer was used for the quantification of the photosynthetic rate, stomatal conductance and transpiration. An increase in the atmospheric CO2 concentration and temperature negatively affected the physiology of the castor bean plants, decreasing the net rate of photosynthesis, transpiration and stomatal conductance.

  12. A review of nutritional and toxicological implications of castor bean (Ricinus communis L.) meal in animal feeding systems.

    Science.gov (United States)

    Akande, T O; Odunsi, A A; Akinfala, E O

    2016-04-01

    The nutrient-rich defatted castor meal has been tested as a potential source of protein in diets of many livestock species but has limitation due to challenges of toxins. This review was conducted to compile the relevant research information on advances in the use of raw and differently processed castor seed meal in animal feed. In this article, distribution and uses of castor and its products were identified. Research findings on the nutrients profile, principal toxins, various detoxification strategies, nutritional value and toxicity on common livestock species were compiled and reviewed. The defatted seed meal had crude protein range of 32-48%, gross energy of about 3200 kcal/kg. Ricin content was 9.3 mg/g seed, and the average RCA content was 9.9 mg/g. The meal had high activity of lectin, which produced agglutination at about 4.70 mg/ml minimum assays. Reports of detoxification strategies showed varying degrees of success but high pH, moist heating and microbial techniques appeared to exert greater effect on deactivating ricin. Detoxification strategy for the allergen component is inconclusive. Tannins and the phenolic contents were present at trace level and did not constitute notable threat. It was concluded that castor seed holds great potential as feedstuff when upgraded but such upgrading must be safe, cost-effective and labour efficient for commercial acceptability. PMID:26150062

  13. Sorption of oil in the polyurethane from oil or castor oil; Sorcao de oleo no poliuretano derivado do petroleo ou do oleo de mamona

    Energy Technology Data Exchange (ETDEWEB)

    Florentino, Wagner M.; Goulart, Shane A.S.; Mulinari, Daniella R. [Centro Universitario de Volta Redonda (UniFOA), Volta Redonda, RJ (Brazil)], e-mail: wagner-can@hotmail.com

    2011-07-01

    The oil outpouring has caused serious environmental problems. To minimize this damage polyurethane foams have been used. In this work, the use of polyurethane from oil and castor oil, in different polyol/diisocyanate mass ratios, to absorb oil was evaluated. Results revealed that the proportion of polyol and diisocyanate influenced in the sorption capacity and the polyurethane from castor oil presented greater sorption capacity. Of this way, can say that the polyurethane from oil can be replaced by castor oil, contributing to sustainable development. (author)

  14. THE EFFECTS OF POSSIBLE CONTAMINATION ON THE RADIOCARBON DATING OF THE DEAD SEA SCROLLS II: EMPIRICAL METHODS TO REMOVE CASTOR OIL AND SUGGESTIONS FOR REDATING

    OpenAIRE

    Rasmussen, Kaare Lund; Van der Plicht, Johannes; Doudna, Gregory; Nielsen, Frederik; Hojrup, Peter; Stenby, Erling Halfdan; Pedersen, Carl Th; Højrup, Peter

    2009-01-01

    While kept at the Rockefeller Museum in East Jerusalem, many Dead Sea Scroll fragments were exposed to castor oil by the original team of editors in the course of cleaning the parchments. Castor oil must be regarded as a serious contaminant in relation to radiocarbon dating. If modern castor oil is present and is not removed prior to dating, the (14)C dates will be skewed artificially towards modern values. In Rasmussen et al. (2001), it was shown that the standard AAA pretreatment procedure ...

  15. Behaviour of neutron moderator materials at high temperatures in CASTOR registered -casks: qualification and assessment

    International Nuclear Information System (INIS)

    The Federal Institute for Materials Research and Testing (BAM) is the responsible German authority for the assessment of mechanical and thermal designs of transport and storage casks for radioactive materials. BAM checks up the proofs of the applicants in their safety reports and assesses the conformity to the Regulations for the Safe Transport of Radioactive Material. One applicant is the Gesellschaft fuer Nuklear-Behaelter mbH (GNB) with a new generation of transport and storage casks of CASTOR registered -design. GNB typically uses ultra high molecular weight Polyethylene (UHMW-PE) for the moderation of free neutrons. Rods made of UHMW-PE are positioned in axial bore holes in the wall of the cask and plates of UHMW-PE are in free spaces between primary and secondary lid and between the bottom of the cask and an outer plate (Figure 1). Because of the heat generated by the radioactive inventory and because of a strained spring at the bottom of every bore hole, UHMW-PE is subjected to permanent thermal and mechanical loads as well as loads from gamma and neutron radiation. UHMW-PE has been used under routine- and normal conditions of transport for maximum temperatures up to 130 C. For new generations of CASTOR registered -design maximum temperatures will be increased up to 160 C. That means a permanent use of UHMW-PE at temperatures within and above the melting region of the crystallites. In this paper, some results of special investigations for the proofs of usability of UHMW-PE at temperatures up to 160 C under real conditions of transport and storage in CASTOR registered -casks are given. For that, investigations on temperature dependent expansion behaviour under laboratory conditions as well as in large scale experiments, especially in the case of multiple heating and cooling, were done. Besides, geometrical creep strength for long-term loading by temperatures and pressures with regard to the chemical and physical stability properties of UHMW-PE above the

  16. Síntesis de espumas rígidas de poliuretano obtenidas a partir de aceite de castor y poliglicerol empleando calentamiento por microondas Synthesis of rigid polyurethane foams obtained from castor oil and polyglycerol using microwave heating

    Directory of Open Access Journals (Sweden)

    Paula Mazo

    2011-01-01

    Full Text Available En este trabajo se realizó la síntesis de espumas rígidas de poliuretano utilizando un macropoliol sintetizado a partir de aceite de castor y poliglicerol, se optimizó mediante un análisis de superficie de respuesta, empleando un diseño factorial 32, los factores evaluados fueron: cantidad de agua y de ácido tartárico, el cual actúa como agente entrecruzante y catalizador; se evalúaron las propiedades mecánicas de las espumas como: densidad aparente (ASTM D1622-08, resistencia a la compresión (ASTM D1621, conductividad térmica (ASTM C177-04 y friabilidad (ASTM C421-8; se realizó Microscopia Electrónica de Barrido (SEM y Análisis de Calorimetría Diferencial de Barrido (DSC. El macropoliol fue obtenido desde fuentes renovables, mediante la transesterificación de Aceite de Castor (CO ó Aceite de Castor Maleinizado (MACO con Poliglicerol (PG. Se evalúo el efecto de las microondas en las reacciones, donde se encuentra una disminución del tiempo; el seguimiento y la caracterización de los productos intermedios se realiza mediante la cuantificación de valor ácido por titulación (ASTM D4662-03 y número de hidroxilos (ASTM D4274-05.In this work we showed the polyurethane rigid foams synthesis using a macropolyol synthesized from castor oil and polyglycerol. This process is optimized employing a response surface analysis and using a 3² factorial design. The factors evaluated were: amount of water and tartaric acid, where tartaric acid acts as crosslinking agent and catalyst; mechanical properties of foams were evaluated as bulk density (ASTM D1622-08, compressive strength (ASTM D1621, thermal conductivity (ASTM C177-04, and friability (ASTM C421-8; scanning electronic microscopic (SEM and differential scanning calorimetry (DSC. The macropolyol was obtained from renewable sources by the transesterification of castor oil (CO or maleinized castor oil (MACO and polyglycerol (PG. The effect of microwaves on the reactions was

  17. A Comparison of the Efficacy, Adverse Effects, and Patient Compliance of the Sena-Graph®Syrup and Castor Oil Regimens for Bowel Preparation

    OpenAIRE

    Ghazikhanlou Sani, Karim; Jafari, Mahmood-Reza; Shams, Safar

    2010-01-01

    Sena-Graph syrup has recently been formulated by an Iranian pharmaceutical company for being used in bowel evacuation before radiography, colonoscopy and surgery. This study compares the efficacy, adverse effects and patient compliance of two bowel preparation regimens with castor oil and Sena-Graph syrup in of outpatients for Intravenous Urography (IVU). One hundred and fourteen consecutive outpatients were randomized to receive either the standard bowel preparation with 60 mL of castor oil ...

  18. Exploiting EST databases for the development and characterization of EST-SSR markers in castor bean (Ricinus communis L.)

    OpenAIRE

    Yang Jun-Bo; Tian Bo; Yang Chun; Qiu Lijun; Liu Aizhong

    2010-01-01

    Abstract Background The castor bean (Ricinus communis L.), a monotypic species in the spurge family (Euphorbiaceae, 2n = 20), is an important non-edible oilseed crop widely cultivated in tropical, sub-tropical and temperate countries for its high economic value. Because of the high level of ricinoleic acid (over 85%) in its seed oil, the castor bean seed derivatives are often used in aviation oil, lubricants, nylon, dyes, inks, soaps, adhesive and biodiesel. Due to lack of efficient molecular...

  19. Positive plasma biasing in front of the lower hybrid grill of Castor tokamak

    International Nuclear Information System (INIS)

    Parasitic generation of suprathermal particles in front of lower hybrid (LH) antennas in tokamaks represents a serious danger for the parts of tokamak first wall connected with this region directly by magnetic field lines. Presence of electrons in radially very narrow wave-plasma interaction region, accelerated up to the energy 200 eV, has been proved recently on Castor tokamak by Langmuir probes (a substantial drop of floating potential is observed). Using emissive Langmuir probes, first experimental evidence of increase of plasma potential in the interaction region is given in this paper. This result confirms predictions of theory about the charge separation due to the escape of accelerated electrons with successive acceleration of plasma ions. (authors)

  20. Castor oil and commercial thermoplastic polyurethane membranes modified with polyaniline: a comparative study

    Energy Technology Data Exchange (ETDEWEB)

    Almeida Junior, Jose Humberto Santos; Meneguzzi, Alvaro; Ferreira, Carlos Arthur, E-mail: jhsajunior@globomail.com [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegtre, RS (Brazil). Dept. de Engenharia de Materiais; Bertuol, Daniel Assumpcao [Universidade Federal de Santa Maria (UFSM), RS (Brazil). Dept. de Engenharia Quimica; Amado, Franco Dani Rico [Universidade Estadual de Santa Cruz (UESC), Ilheus, BA (Brazil). Dept. de Ciencias Exatas e Tecnologia

    2013-11-01

    The study of conducting polymeric membranes is decisive in some areas, as in fuel cells and electrodialysis. This work aims the study of membranes using conventional and conductive polymers blends. Two types of polyurethane were used as conventional polymers, commercial thermoplastic polyurethane and polyurethane synthesized from castor oil and 4-4-dicyclohexylmethane isocyanate. Two kinds of conducting polymers were used, polyaniline doped with organic acid and a self doped polyaniline. The polymers and the membranes were characterized by electrical conductivity, Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA) and scanning electron microscopy (SEM). The synthesis of the membranes produced was proper, featuring a complete reaction, analyzed by FTIR. The membranes also showed good mechanical properties and thermal stability ( Almost-Equal-To 220 Degree-Sign C). Among the membranes studied, the polyaniline doped with p-toluenesulphonic acid obtained higher thermal and viscoelastic properties. Thus they can be used in separation techniques using membranes. (author)

  1. Design and test beam studies for the CASTOR calorimeter of the CMS experiment

    International Nuclear Information System (INIS)

    CASTOR is a calorimeter designed for the very forward region of the CMS experiment at the LHC: 5.2I deep calorimeter. The electronics has to deal with a high occupancy and a high dynamic range (104) to measure minimum ionizing particles and full beam energy (7 TeV) jets. The charge of the PMT's is digitized for every bunch crossing (25 ns) and sent as 1.6 Gbit/s streams via 78 optical links to the service cavern. There FGPA's calculate trigger bits, buffer the data and communicate with the CMS systems. A granularity of 224 channels allows to reconstruct shower profiles. Electrons, hadrons and muons have been measured in test beams. The optical response has been extracted to be ∼9-12 photoelectrons(ph.e.)/readout-unit for muons, ∼30ph.e./GeV for electrons and ∼13ph.e./GeV for high energetic pions.

  2. Castor oil and commercial thermoplastic polyurethane membranes modified with polyaniline: a comparative study

    Directory of Open Access Journals (Sweden)

    José Humberto Santos Almeida Júnior

    2013-01-01

    Full Text Available The study of conducting polymeric membranes is decisive in some areas, as in fuel cells and electrodialysis. This work aims the study of membranes using conventional and conductive polymers blends. Two types of polyurethane were used as conventional polymers, commercial thermoplastic polyurethane and polyurethane synthesized from castor oil and 4-4-dicyclohexylmethane isocyanate. Two kinds of conducting polymers were used, polyaniline doped with organic acid and a self doped polyaniline. The polymers and the membranes were characterized by electrical conductivity, Fourier transform infrared spectroscopy (FTIR, thermogravimetric analysis (TGA, dynamic mechanical analysis (DMA and scanning electron microscopy (SEM. The synthesis of the membranes produced was proper, featuring a complete reaction, analyzed by FTIR. The membranes also showed good mechanical properties and thermal stability (≈ 220 °C. Among the membranes studied, the polyaniline doped with p-toluenesulphonic acid obtained higher thermal and viscoelastic properties. Thus they can be used in separation techniques using membranes.

  3. Phosphatidylcholine synthesis in castor bean endosperm. Metabolism of S-adenosylmethionine and ethanolamine

    International Nuclear Information System (INIS)

    The methylation steps in the biosynthesis of phosphatidylcholine by castor bean endosperm have been studied. Endosperm halves were incubated with tracer concentrations of [2-14C] ethanolamine or [14C]S-adenosyl-L-methionine for 10 or 30 minutes, respectively. The kinetics of appearance were followed in methyl- and dimethylethanolamine, choline, and their phospho-, CDP-, and phosphatidyl-derivatives. Methyl groups from S-adenosyl-L-methionine rapidly labeled the three methylated-ethanolamine derivatives. Radioactivity then decreased in these compounds and accumulated in phosphatidylcholine. The initial methylation utilized ethanolamine as a substrate to form methyl-ethanolamine, which was partially converted to dimethyl-ethanolamine, choline, and phosphomethylethanolamine. Subsequent methylations occurred at both phospho-base and phosphatidyl-base levels. Experiments with ethanolamine confirmed these results

  4. Toroidal electric field in front of the lower hybrid grill of the castor tokamak

    International Nuclear Information System (INIS)

    A small tokamak Castor (R/a = 0.4/0.85 m) with low plasma energy density and short pulses (20 ms) offers a unique possibility to carry out probe measurements in front of the grill antenna and as a consequence to provide direct information about the local electric fields in this region. For measurements of the toroidal electrical field, a small double probe with 2 tips separated by 3.5 mm in the toroidal direction has been used. The tips are oriented in the radial direction. The probe is radially movable in front of the central grill waveguide. Cross-correlations and FFT (fast Fourier transform) analysis of the measured Vfl signals are given together with an attempt to investigate characteristics of toroidal electric field Etor (up to 500 kHz), derived from Vfl measured by 2 toroidally separated tips

  5. Castor oil and commercial thermoplastic polyurethane membranes modified with polyaniline: a comparative study

    International Nuclear Information System (INIS)

    The study of conducting polymeric membranes is decisive in some areas, as in fuel cells and electrodialysis. This work aims the study of membranes using conventional and conductive polymers blends. Two types of polyurethane were used as conventional polymers, commercial thermoplastic polyurethane and polyurethane synthesized from castor oil and 4-4-dicyclohexylmethane isocyanate. Two kinds of conducting polymers were used, polyaniline doped with organic acid and a self doped polyaniline. The polymers and the membranes were characterized by electrical conductivity, Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA) and scanning electron microscopy (SEM). The synthesis of the membranes produced was proper, featuring a complete reaction, analyzed by FTIR. The membranes also showed good mechanical properties and thermal stability (≈ 220 °C). Among the membranes studied, the polyaniline doped with p-toluenesulphonic acid obtained higher thermal and viscoelastic properties. Thus they can be used in separation techniques using membranes. (author)

  6. Prevalence of agglutinating antibodies to Toxoplasma gondii and Sarcocystis neurona in beavers (Castor canadensis) from Massachusetts

    Science.gov (United States)

    Jordan, C.N.; Kaur, T.; Koenen, K.; DeStefano, S.; Zajac, A.M.; Lindsay, D.S.

    2005-01-01

    The present study examined the seroprevalence of Toxoplasma gondii and Sarcocystls neurona in a population of beavers (Castor canadensis) from Massachusetts. Sixty-two blood samples were collected during the field seasons over 3 consecutive years from different animals. Blood was collected onto filter paper and shipped to the Department of Biomedical Sciences, Virginia Tech, Blacksburg, Virginia, for parasite testing. The samples were tested at dilutions of 1:25, 1:50, and 1:100 against each parasite antigen by modified agglutination tests to determine whether antibodies to either parasite were present in the blood. Six of 62 samples (10%) were positive for T. gondii, with 2 samples having titers of 1:25 and 4 having titers of 1:50. Four of 62 samples (6%) were positive for S. neurona, with 2 samples having titers of 1:25 and 2 having titers of 1:50. ?? American Society of Pathologists 2005.

  7. The Mechanical Properties of Castor Seed Shell-polyester Matrix Composites

    Directory of Open Access Journals (Sweden)

    S.C. Nwigbo

    2013-05-01

    Full Text Available A composite with a polyester matrix reinforced with chemically modified shells of castor seed (Ricinus communis was produced. The effect of the shell (filler on the mechanical properties of the composite was experimentally quantified. A preliminary study was earlier carried out the shell in terms of their chemical constituents, functional group and mechanical strength. The shell was ground and chemically treated to enhance good bonding and adhesion to the matrix. Composites were fabricated using a hand lay-up or contact mould method for different percentage compositions of the filler. Tests, with respect to the mechanical properties (i.e., tensile, flexural and creep response were carried out. The result obtained was compared with the unreinforced polyester plate. It was observed that the inclusion of the filler (shell added strength to the composite. Scanning Electron Microscopy (SEM was taken on the composite samples to study the morphology of the composites.

  8. High pressure changes of the castor oil viscosity by ultrasonic method

    Science.gov (United States)

    Rostocki, A. J.; Siegoczyński, R. M.; Kielczyński, P.; Szalewski, M.

    2008-07-01

    The pressure change of viscosity of castor oil have been measured by ultrasonic method within the range of pressure up to 0.9 GPa. For the measurement, the authors have applied a new ultrasonic method based on Bleustein-Gulyaev (B-G) waves. For the lower pressures (up to 0.3 GPa) the results have been compared with earlier results obtained by falling body method, whereas for the higher pressure range results were compared with those obtained by the flow type viscometer. The measurements have shown: 1. Exponential rise of viscosity with pressure up to 0.4 GPa according to the Barus formula. 2. Extraordinary increment of viscosity at constant pressure during phase transition. 3. The decomposition of the high pressure phase during the decompression process have shown very large hysteresis of viscosity on pressure. 4. After the decompression process the viscosity lasts higher then a initial value for several hours.

  9. Plasma formation and sustainment by a multijunction grill on the CASTOR tokamak

    International Nuclear Information System (INIS)

    Radiofrequency power up to 40 kW, injected into the vacuum chamber of the CASTOR tokamak by a multijunction grill, was used for plasma production during the ramp-up phase of a toroidal magnetic field. When electron cyclotron resonance (ECR) appears inside the tokamak chamber for the given pumping frequency (f=1.25 GHz) plasma with a density greater than 2x1018 m-3 and a temperature of Te=10 to 40 eV is produced. The plasma is sustained at some lower value of density during the whole RF pulse. Simultaneously, a toroidal current of up to ≅ 0.2 kA is generated. The energy confinement time is estimated to be about 30 μs during the ECR breakdown. (author)

  10. Effect of gamma radiation on the antioxidant activity of castor oil: Preliminary report

    International Nuclear Information System (INIS)

    The effect of gamma radiation in the antioxidant activity of castor oil, Ricinus communis L., has been studied by the DPPH method. The IC50 of the oil is 0,28 μL/mL, which indicates that this oil contain compounds with the ability to neutralize DPPH radicals. The antioxidant activity does not vary too much when the oil is irradiated up to 20 kGy, except for 15 kGy where it decreased 6%. If the oil was obtained from irradiated seeds, the activity does not vary too much up to 3 kGy. However, for 5 kGy it was observed a reduction of 20%. (orig.)

  11. Rhipicephalus sanguineus (Acari: Ixodidae) female ticks exposed to castor oil (Ricinus communis): an ultrastructural overview.

    Science.gov (United States)

    Sampieri, B R; Furquim, K C S; Nunes, P H; Camargo-Mathias, M I

    2013-02-01

    Tick control has been accomplished through the use of synthetic acaricides, which has created resistant individuals, as well as contaminating the environment and nontarget organisms. Substances of plant origin, such as oils and extracts of eucalyptus and neem leaves, have been researched as an alternative to replace the synthetic acaricides. Ricinoleic acid esters from castor oil have recently been shown as a promising alternative in eliminating bacterial contamination during ethanol fermentation, by acting as an effective biocide. The same positive results have been observed when these esters are added to the food given to tick-infested rabbits. This study tested the effect of these substance on the reproductive system of Rhipicephalus sanguineus females, added to rabbit food, more specifically on oogenesis. For this, four groups were established: four control groups (CG1, CG2, CG3, and CG4) and four treatment groups (TG1, TG2, TG3, and TG4) with one rabbit in each (New Zealand White), used as hosts. After full 4 days feeding (semi-engorgement), the females were collected and had their ovaries extracted. In this study, it was observed that R. sanguineus females exposed to esters had their ovaries modified, which was demonstrated through transmission electron microscopy techniques. The addition of ricinoleic esters to the diet of tick-infested rabbits revealed how toxic such substances are for the cytoplasmic organelles of oocytes and pedicel cells. These compounds can change the morphophysiology of germ and somatic cells, consequently influencing their viability and, therefore, confirming that the ricinoleic acid esters from castor oil are a promising substance in the control of R. sanguineus. PMID:23086445

  12. Kinetic and Thermodynamics studies for Castor Oil Extraction Using Subcritical Water Technology.

    Science.gov (United States)

    Abdelmoez, Wael; Ashour, Eman; Naguib, Shahenaz M; Hilal, Amr; Al Mahdy, Dalia A; Mahrous, Engy A; Abdel-Sattar, Essam

    2016-06-01

    In this work both kinetic and thermodynamics of castor oil extraction from its seeds using subcritical water technique were studied. It was found that the extraction process followed two consecutive steps. In these steps, the oil was firstly extracted from inside the powder by diffusion mechanism. Then the extracted oil, due to extending the extraction time under high temperature and pressure, was subjected to a decomposition reaction following first order mechanism. The experimental data correlated well with the irreversible consecutive unimolecular-type first order mechanism. The values of both oil extraction rate constants and decomposition rate constants were calculated through non-linear fitting using DataFit software. The extraction rate constants were found to be 0.0019, 0.024, 0.098, 0.1 and 0.117 min(-1), while the decomposition rate constants were 0.057, 0.059, 0.014, 0.019 and 0.17 min(-1) at extraction temperatures of 240, 250, 260, 270 and 280°C, respectively. The thermodynamic properties of the oil extraction process were investigated using Arrhenius equation. The values of the activation energy, Ea, and the frequency factor, A, were 73 kJ mol(-1) and 946, 002 min(-1), respectively. The physicochemical properties of the extracted castor oil including the specific gravity, viscosity, acid value, pH value and calorific value were found to be 0.947, 7.487, 1.094 mg KOH/g, 6.1, and 41.5 MJ/Kg, respectively. Gas chromatography analysis showed that ricinoleic acid (83.6%) appears as the predominant fatty acid in the extracted oil followed by oleic acid (5.5%) and linoleic acid (2.3%). PMID:27181250

  13. Anatomic and tissue characteristics in goats fed for extended periods with residue of castor biodiesel production

    Directory of Open Access Journals (Sweden)

    Cláudio Henrique de Almeida Oliveira

    2013-12-01

    Full Text Available Twenty-five adult crossbred goats, divided in two groups, were fed over a period of 16 months with diets based on Tifton hay and concentrate feed with (DCO or without (WDCO detoxified castor bean meal as a substitute for soybean meal. Throughout 480 days, blood samples were taken to measure lactate dehydrogenase, aspartate aminotransferase, alanine aminotransferase, urea, albumin and creatinine. The animals were euthanized, and the anatomical components (lungs, heart, spleen, liver, kidneys, tongue, empty stomach, empty intestines, omentum, cardiac and renal adipose tissue, carcass and commercial cuts (shoulder, ham, loin, ribs and neck were weighed. Thereafter, an anatomic dissection of the loin was performed, separating the muscle, adipose and bone tissues. On the muscular part of the loin, longissimus dorsi, the proximate composition, fatty acid profile and the expression of SEW-1, IGF-I and IGF-II were analyzed. A higher incidence of bone tissue was observed in the anatomical dissections of the loin and a lower incidence of fat in the proximate composition of the longissimus dorsi of the DCO group compared to the WDCO group (p<0.05. The expression of the IGF-II and SEW-1 genes was higher (p<0.001 for each in the muscle tissue of the DCO animals. Thus, using detoxified castor bean meal for long periods does not produce significant changes in the anatomical composition of the loin or the proximate composition of the longissimus dorsi. However, the differences in gene expression suggest the need for new investigations and care when using this product for animal feeding.

  14. CASTOR registered HAW28M - a high heat load cask for transport and storage of vitrified high level waste containers

    International Nuclear Information System (INIS)

    Within the German return programme for vitrified high level waste (HLW) from reprocessing at COGEMA and BNFL up to now 39 casks loaded with 28 containers each were transported back to Germany and are stored in the Interim Storage Facility Gorleben (TBL-G) for up to 40 years. For transport and storage in all but one case the GNB casks CASTOR registered HAW 20/28 CG have been used. This cask type is designed to accommodate 20 or 28 HLW containers with a total thermal power of 45 kW maximum. In the near future, among the high level waste, which has to be returned to Germany, there will be an increasing number of containers of which the heat capacity and radioactive inventory will exceed the technical limits of the CASTOR registered HAW 20/28 CG. Therefore GNB has started the development of a new cask generation, named CASTOR registered HAW28M, meeting these future requirements. The CASTOR registered HAW28M is especially developed for the transport of vitrified residues from France and Great Britain to Germany. It complies with the international regulations for type B packages according to IAEA (International Atomic Energy Agency). It is thus guaranteed that even in case of any accident the cask body and the lid system remain functional and the safe confinement of the radioactive contents remains intact during transport. The CASTOR registered HAW28M fulfills not only the requirements for transport but also the acceptance criteria of interim storage: radiation shielding, heat dissipation, safe confinement under both normal and hypothetical accident conditions. Storage buildings such as the TBL-G simply support the safety functions of the cask. The challenge for the development results from higher requirements of the technical specification, particularly related to fuel which is reprocessed. As a consequence of the reprocessing of fuel with increased enrichment and burn up, higher heat capacity and sophisticated shielding measures have to be considered. For the CASTOR

  15. Effect of γ-radiation sterilization on the stability of polyurethane potting compounds based on castor oil/SMDI and caprolactone polyol/SMDI, used for hollow fibre haemodialyzer

    International Nuclear Information System (INIS)

    Stability of polyurethane potting compounds based on castor oil/SMDI and caprolactone polyol/SMDI in repeated gamma radiation sterilization was studied. Radiation-induced degradation and leaching of low molecular weight fragments are higher in castor oil based polyurethane than in caprolactone polyol based polyurethane. For castor oil and caprolactone polyol based polyurethanes degradation increases up to 5 Mrad dose of sterilization. Further increase of dose of sterilization decreases leaching in caprolactone polyol based polyurethane which has resulted from secondary reactions leading to crosslinking. In the case of castor oil based polyurethane such crosslinks undergo cleavage at 10 Mrad dose of sterilization. (author)

  16. Sexual and Asexual Reproduction of Salix sitchensis and the Influence of Beaver (Castor canadensis) Herbivory on Reproductive Success

    OpenAIRE

    Travis G. Gerwing; Alyssa M. Allen Gerwing; Rapaport, Eric; Alström-Rapaport, Cecilia

    2012-01-01

    The influence of beaver (Castor canadensis Kuhl) herbivory on Salix reproduction, specifically the stimulation of asexual reproduction via browsed stem fragments, is relatively unknown. This study aimed to determine if beaver herbivory stimulates asexual reproduction of riparian willows and results in mature populations dominated by clones. The survival of seedlings and asexual propagules produced by beaver browse in populations of the riparian willow Salix sitchensis (Sanson in Bongard) were...

  17. Experience with the loading and transport of fuel assembly transport casks, including CASTOR casks, and the radiation exposure of personnel

    International Nuclear Information System (INIS)

    In 1997 and 1998, six spent fuel assembly transports started from the nuclear power plant Gemeinschaftskernkraftwerk Neckar (GKN), using CASTOR-V19 casks. Professor Kuni of Marburg University challenged the statement made by the German Federal Office for Radiation Protection (Bundesamt fuer Strahlenschutz (BfS)) based on accepted scientific knowledge, according to which so-called CASTOR transports present no risk, either to the population or to the escorting police units. This paper shows that the collective dose during the loading of the CASTOR casks amounted to 4.5 mSv (gamma and neutrons) per cask at the most, and that the maximum individual dose amounted to 0.26 mSv. In addition to these doses, the collective dose during handling and transport must be considered: this amounted to 0.35 mSv (gamma and neutrons). The dose to the police escort was -2 (limit for surface contamination), presented degrees of contamination >4 Bq cm-2 upon reaching the Valognes/Cogema terminal. However, transport casks coming from French plants also revealed degrees of contamination >4 Bq cm-2, as well as 'hot spots'. No such contamination was found on NTL 11 casks transported from the GKN to Sellafield. Neither was any increased contamination found upon the arrival of CASTOR-V19 casks transported from GKN to Gorleben or Ahaus. The partially sensationalist media reports were inversely proportional to the actual radiological relevance of the matter. The German Commission on Radiation Protection (SSK) confirmed that the radiological effect of such contaminated spent fuel transports is negligible. (author)

  18. Exogenous glutamine increases lipid accumulation in developing seeds of castor bean (Ricinus communis L.) cultured in vitro

    OpenAIRE

    Zhang Yang; Mulpuri Sujatha; Liu Aizhong

    2015-01-01

    This report describes biomass production and compositional changes of developing castor seeds in response to change in the nitrogen resource (glutamine) of the medium. During the early developmental period (24-36 days after pollination), oil was found to initially accumulate in the developing seeds. Carbohydrates and oil were inversely related after glutamine provision (35 mM, in the culture medium). [U-14C] sucrose labeling was used to investigate the effe...

  19. Genome-wide survey and expression profiles of the AP2/ERF family in castor bean (Ricinus communis L.)

    OpenAIRE

    Xu, Wei; Li, Fei; Ling, Lizhen; Liu, Aizhong

    2013-01-01

    Background The AP2/ERF transcription factor, one of the largest gene families in plants, plays a crucial role in the regulation of growth and development, metabolism, and responses to biotic and abiotic stresses. Castor bean (Ricinus communis L., Euphobiaceae) is one of most important non-edible oilseed crops and its seed oil is broadly used for industrial applications. The available genome provides a great chance to identify and characterize the global information on AP2/ERF transcription fa...

  20. A Comparison of the Efficacy of Castor Oil and Senagroph Herbal Extract in Patients' Bowel Preparation

    OpenAIRE

    Karim Ghazikanlou Sani; Mahmoodreza Jafari; Hasan Gheshlaghi

    2011-01-01

    Background/Objective: Bowel preparation has been"nconsidered necessary in radiologic examinations of the"nabdominal region to improve the diagnostic quality and"naccuracy. This study compares the effectiveness, side"neffects and patient tolerance of two bowel preparation"nregimens with castor oil and Senagraph herbal extract"nin bowel preparation of outpatients for intravenous"nurography (IVU)."nPatients and Methods: One-hundred fourteen"nconsecuti...

  1. Lipase-mediated hydrolysis of castor oil on its biotransformation into γ-decalactone by Yarrowia lipolytica

    OpenAIRE

    Braga, Adelaide; Gomes, Nelma; Belo, Isabel

    2011-01-01

    γ-Decalactone is a peach-like flavour compound that can be obtained biotechnologically by the biotransformation of ricinoleic acid. Castor oil is the substrate most usually used in the biotechnological production of γ-decalactone and it needs to be hydrolyzed in order to release ricinoleic acid. That biotransformation can be carried out by various microorganisms, such as the non-conventional yeast Yarrowia lipolytica, considered as non-pathogenic and as GRAS by the FDA. In order to ...

  2. The Use of Acceleration to Code for Animal Behaviours; A Case Study in Free-Ranging Eurasian Beavers Castor fiber

    OpenAIRE

    Graf, Patricia M.; Rory P Wilson; Lama Qasem; Klaus Hackländer; Frank Rosell

    2015-01-01

    Recent technological innovations have led to the development of miniature, accelerometer-containing electronic loggers which can be attached to free-living animals. Accelerometers provide information on both body posture and dynamism which can be used as descriptors to define behaviour. We deployed tri-axial accelerometer loggers on 12 free-ranging Eurasian beavers Castor fiber in the county of Telemark, Norway, and on four captive beavers (two Eurasian beavers and two North American beavers ...

  3. Characterization of castor bean genotypes under various environments using sds-page of total seed storage proteins

    International Nuclear Information System (INIS)

    Castor bean (Ricinus communis L.) is an indeterminate, non-edible oil seed crop grown in low rainfall regions of semi-arid tropics and sub-tropics. The present work was conducted to see the feasibility of electrophoresis for intra-specific characterization of castor bean on the basis of their total seed storage proteins. The protein profiles of all the four accessions were very much alike, both in number of bands and in their distribution on the gel, even though accessions represented a wide range of geographic origin. Occasionally, variation was observed in the density or sharpness of bands. The seed protein patterns were also uniform among various accessions grown under various environments. On the basis of banding pattern, polypeptides could be divided into three regions, A to C, equivalent to increasing Rf value and decreasing molecular weight. The present investigation revealed no variation in different accessions and under different environments with regards to their total seed protein profiles. The results clearly showed that it was impossible to discriminate various genotypes from each other, as they were characterized by same banding patterns. However, it might be useful to distinguish diverse forms of it from one another. The present investigation revealed very limited variation in castor bean genotypes in Pakistan. (author)

  4. Isolation and Characterization of Castor Seed Oil and Its Utilization Potential in the Production of Polyurethane Foam

    Directory of Open Access Journals (Sweden)

    Aishat IMASUEN

    2014-05-01

    Full Text Available Firm polyurethane (PU foams were prepared using Nigerian grown brown and white castor seed oil starting materials extracted at ambient temperature. Polyol with terminal primary hydroxyl groups synthesized from crude castor oil were reacted with aromatic diphenylmethane diisocyanate to prepare the foams. Castor seeds were decorticated and milled, after which they were weighed into filter bags for expression at ambient temperature, 50, 100 and 150 °C respectively at a constant pressure of 2 ton. Evaluation of the oil yield shows that the brown seeds with lower weight at a temperature of 150 °C gave a high yield of 54.79 %, compared to high weight at ambient temperature, which yielded 29.45 %. The white seeds with lower weight at a temperature of 150 °C gave high yields of 52.75 %, compared to higher weight at ambient temperature yielding 30.06 %. The oil was characterized in terms of moisture content, volatile content, acid value, free fatty acid and saponification value. The results are within the range reported in literature. In-situ polymerization was used in the production of polyurethane foam using the extracted oil as polyol. The results of the foam characterization in terms of compression set and density conform to standard foams.doi:10.14456/WJST.2014.20

  5. Gene Structures, Evolution and Transcriptional Profiling of the WRKY Gene Family in Castor Bean (Ricinus communis L.).

    Science.gov (United States)

    Zou, Zhi; Yang, Lifu; Wang, Danhua; Huang, Qixing; Mo, Yeyong; Xie, Guishui

    2016-01-01

    WRKY proteins comprise one of the largest transcription factor families in plants and form key regulators of many plant processes. This study presents the characterization of 58 WRKY genes from the castor bean (Ricinus communis L., Euphorbiaceae) genome. Compared with the automatic genome annotation, one more WRKY-encoding locus was identified and 20 out of the 57 predicted gene models were manually corrected. All RcWRKY genes were shown to contain at least one intron in their coding sequences. According to the structural features of the present WRKY domains, the identified RcWRKY genes were assigned to three previously defined groups (I-III). Although castor bean underwent no recent whole-genome duplication event like physic nut (Jatropha curcas L., Euphorbiaceae), comparative genomics analysis indicated that one gene loss, one intron loss and one recent proximal duplication occurred in the RcWRKY gene family. The expression of all 58 RcWRKY genes was supported by ESTs and/or RNA sequencing reads derived from roots, leaves, flowers, seeds and endosperms. Further global expression profiles with RNA sequencing data revealed diverse expression patterns among various tissues. Results obtained from this study not only provide valuable information for future functional analysis and utilization of the castor bean WRKY genes, but also provide a useful reference to investigate the gene family expansion and evolution in Euphorbiaceus plants. PMID:26849139

  6. Gene Structures, Evolution, Classification and Expression Profiles of the Aquaporin Gene Family in Castor Bean (Ricinus communis L..

    Directory of Open Access Journals (Sweden)

    Zhi Zou

    Full Text Available Aquaporins (AQPs are a class of integral membrane proteins that facilitate the passive transport of water and other small solutes across biological membranes. Castor bean (Ricinus communis L., Euphobiaceae, an important non-edible oilseed crop, is widely cultivated for industrial, medicinal and cosmetic purposes. Its recently available genome provides an opportunity to analyze specific gene families. In this study, a total of 37 full-length AQP genes were identified from the castor bean genome, which were assigned to five subfamilies, including 10 plasma membrane intrinsic proteins (PIPs, 9 tonoplast intrinsic proteins (TIPs, 8 NOD26-like intrinsic proteins (NIPs, 6 X intrinsic proteins (XIPs and 4 small basic intrinsic proteins (SIPs on the basis of sequence similarities. Functional prediction based on the analysis of the aromatic/arginine (ar/R selectivity filter, Froger's positions and specificity-determining positions (SDPs showed a remarkable difference in substrate specificity among subfamilies. Homology analysis supported the expression of all 37 RcAQP genes in at least one of examined tissues, e.g., root, leaf, flower, seed and endosperm. Furthermore, global expression profiles with deep transcriptome sequencing data revealed diverse expression patterns among various tissues. The current study presents the first genome-wide analysis of the AQP gene family in castor bean. Results obtained from this study provide valuable information for future functional analysis and utilization.

  7. Gene Structures, Evolution, Classification and Expression Profiles of the Aquaporin Gene Family in Castor Bean (Ricinus communis L.).

    Science.gov (United States)

    Zou, Zhi; Gong, Jun; Huang, Qixing; Mo, Yeyong; Yang, Lifu; Xie, Guishui

    2015-01-01

    Aquaporins (AQPs) are a class of integral membrane proteins that facilitate the passive transport of water and other small solutes across biological membranes. Castor bean (Ricinus communis L., Euphobiaceae), an important non-edible oilseed crop, is widely cultivated for industrial, medicinal and cosmetic purposes. Its recently available genome provides an opportunity to analyze specific gene families. In this study, a total of 37 full-length AQP genes were identified from the castor bean genome, which were assigned to five subfamilies, including 10 plasma membrane intrinsic proteins (PIPs), 9 tonoplast intrinsic proteins (TIPs), 8 NOD26-like intrinsic proteins (NIPs), 6 X intrinsic proteins (XIPs) and 4 small basic intrinsic proteins (SIPs) on the basis of sequence similarities. Functional prediction based on the analysis of the aromatic/arginine (ar/R) selectivity filter, Froger's positions and specificity-determining positions (SDPs) showed a remarkable difference in substrate specificity among subfamilies. Homology analysis supported the expression of all 37 RcAQP genes in at least one of examined tissues, e.g., root, leaf, flower, seed and endosperm. Furthermore, global expression profiles with deep transcriptome sequencing data revealed diverse expression patterns among various tissues. The current study presents the first genome-wide analysis of the AQP gene family in castor bean. Results obtained from this study provide valuable information for future functional analysis and utilization. PMID:26509832

  8. Expression of Castor LPAT2 Enhances Ricinoleic Acid Content at the sn-2 Position of Triacylglycerols in Lesquerella Seed

    Science.gov (United States)

    Chen, Grace Q.; van Erp, Harrie; Martin-Moreno, Jose; Johnson, Kumiko; Morales, Eva; Browse, John; Eastmond, Peter J.; Lin, Jiann-Tsyh

    2016-01-01

    Lesquerella is a potential industrial oilseed crop that makes hydroxy fatty acid (HFA). Unlike castor its seeds are not poisonous but accumulate lesquerolic acid mostly at the sn-1 and sn-3 positions of triacylglycerol (TAG), whereas castor contains ricinoleic acid (18:1OH) at all three positions. To investigate whether lesquerella can be engineered to accumulate HFAs in the sn-2 position, multiple transgenic lines were made that express castor lysophosphatidic acid acyltransferase 2 (RcLPAT2) in the seed. RcLPAT2 increased 18:1OH at the sn-2 position of TAGs from 2% to 14%–17%, which resulted in an increase of tri-HFA-TAGs from 5% to 13%–14%. Our result is the first example of using a LPAT to increase ricinoleic acid at the sn-2 position of seed TAG. This work provides insights to the mechanism of HFA-containing TAG assembly in lesquerella and directs future research to optimize this plant for HFA production. PMID:27058535

  9. Mitochondrial genomes reveal slow rates of molecular evolution and the timing of speciation in beavers (Castor, one of the largest rodent species.

    Directory of Open Access Journals (Sweden)

    Susanne Horn

    Full Text Available BACKGROUND: Beavers are one of the largest and ecologically most distinct rodent species. Little is known about their evolution and even their closest phylogenetic relatives have not yet been identified with certainty. Similarly, little is known about the timing of divergence events within the genus Castor. METHODOLOGY/PRINCIPAL FINDINGS: We sequenced complete mitochondrial genomes from both extant beaver species and used these sequences to place beavers in the phylogenetic tree of rodents and date their divergence from other rodents as well as the divergence events within the genus Castor. Our analyses support the phylogenetic position of beavers as a sister lineage to the scaly tailed squirrel Anomalurus within the mouse related clade. Molecular dating places the divergence time of the lineages leading to beavers and Anomalurus as early as around 54 million years ago (mya. The living beaver species, Castor canadensis from North America and Castor fiber from Eurasia, although similar in appearance, appear to have diverged from a common ancestor more than seven mya. This result is consistent with the hypothesis that a migration of Castor from Eurasia to North America as early as 7.5 mya could have initiated their speciation. We date the common ancestor of the extant Eurasian beaver relict populations to around 210,000 years ago, much earlier than previously thought. Finally, the substitution rate of Castor mitochondrial DNA is considerably lower than that of other rodents. We found evidence that this is correlated with the longer life span of beavers compared to other rodents. CONCLUSIONS/SIGNIFICANCE: A phylogenetic analysis of mitochondrial genome sequences suggests a sister-group relationship between Castor and Anomalurus, and allows molecular dating of species divergence in congruence with paleontological data. The implementation of a relaxed molecular clock enabled us to estimate mitochondrial substitution rates and to evaluate the effect

  10. Long-term experience with the storage of spent fuel and vitrified high level waste in CASTOR and CONSTOR casks

    International Nuclear Information System (INIS)

    Two decades ago the world-wide first transport and storage cask-a CASTOR Ic-DIORIT-was loaded in Wurenlingen/Switzerland. Meanwhile CASTOR casks are used at 24 sites on four continents. Spent fuel assemblies of PWR, BWR, VVER, RBMK, MTR and THTR as well as vitrified high active waste containers are stored in these kinds of full metal casks. Also MOX fuel of PWR and BWR has been stored. Starting in the mid of the 90ies, GNB developed the new CONSTOR cask concept, which is based on a double liner technology with heavy concrete as shielding material in between. This CONSTOR cask concept fulfils as well all design criteria for transport and for storage given by the IAEA recommendations and by national authorities. The advantages of the CONSTORR casks are the much simpler manufacturing requirements compared to the fabrication of full metal casks. The CASTOR and CONSTOR casks have been thoroughly investigated by many experiments. There have been around 100 drop tests, a lot of them with full scale casks, fire tests, simulations of airplane crash, investigations with anti tank weapons, and an explosion of a railway tank with liquid gas beside a CASTOR cask. The casks are stored in especially designed buildings, on simple concrete pads, or on pads with additional shielding walls around it. Most of the casks are stored vertically, but some of them horizontally in a storage cradle. Up to now, around 700 CASTOR and CONSTOR casks have been loaded for long-term storage. This results in around 4,800 cask years and 24,000 metallic gasket years, allowing to draw conclusions with respect to the safety of dry storage, especially for the safe confinement of the radioactive inventory. The storage experience shows the excellent behaviour of the metallic gaskets and of the tightness control system. The two decades of storage have shown that the basic requirements, which are safe confinement, criticality safety, sufficient shielding and appropriate heat transfer have been fulfilled in

  11. Effect of fermentation period on the organic acid and amino acid contents of Ogiri from castor oil bean seeds

    Directory of Open Access Journals (Sweden)

    Ojinnaka, M-T. C.

    2013-01-01

    Full Text Available Aims: To monitor the changes in the concentration of organic acid and amino acid contents during the fermentation of castor oil bean seed into ogiri.Methodology and results: In this study, ogiri, a Nigerian fermented food condiment was prepared from castor oil bean using Bacillus subtilis as a monoculture starter for the production of three different fermented castor oil bean condiment samples: B1 (0% NaCl/lime, B2 (2% NaCl, B3 (3% lime. Variations in the composition of the castor oil bean with fermentation over 96 h periods were evaluated for organic acid and amino acid contents using High Performance Liquid Chromatography. Organic acids were detected in the fermented castor oil bean samples as fermentation period increased to 96 h. Organic acids identified were oxalic, citric, tartaric, malic, succinic, lactic, formic, acetic, propionic and butyric acids. The lactic acid contents in sample B1 (0% NaCl/lime decreased initially and then increased as the fermentation period progressed. The value at 96 h fermentation was 1.336 µg/mL as against 0.775 µg/mL at 0 h fermentation. Sample B3 (3% lime had lactic acid content that increased as fermentation period increased with lactic acid content of 1.298 µg/mL at 96 h fermentation. The acetic acid content of sample B1 increased as fermentation progressed and at 96 h fermentation, its value was 1.204 µg/mL while those of B2 and B3 were 0.677 µg/mL and 1.401 µg/mL respectively. The three fermented castor oil bean samples also contained sufficient amount of amino acids. Sample B1 had the highest values in isoleucine glycine and histidine with values 1.382 µg/mL, 0.814 µg/mL and 1.022 µg/mL respectively while sample B2 had the highest value in leucine content with 0.915 µg/mL at 96 h fermentation, closely followed by sample B3 and B1 with 0.798 µg/mL and 0.205 µg/mL respectively. The results of amino acid analysis indicated a high concentration of all amino acids at 96 h of fermentation

  12. Diesel-alcohol-castor oil fuel blend as an alternative fuel for compression ignition motors; Misturas diesel-alcool-oleo de ricina como um combustivel alternativo para motores de ignicao por compressao

    Energy Technology Data Exchange (ETDEWEB)

    Peralta, Eduardo Gagliuffi; Bastos, Jose Guilherme R.R.; Barbosa, Cleiton Rubens Formiga [Rio Grande do Norte Univ., Natal, RN (Brazil). Centro de Tecnologia. Dept. de Engenharia Mecanica]. E-mail: eduardo@dem.ufrn.br

    2000-07-01

    This work evaluates some characteristics of the diesel-alcohol-castor oil ternary blends, where the castor oil is used as co-solvent viewing the using in compression ignition motors. The obtained results present the possibility of using those ternary blends as alternative fuels in compression ignition motors to be adopted in regions where the blend components are available.

  13. Polyurethane resins derived from castor oil (Ricinus communis) for tibial crest deviation in dogs

    International Nuclear Information System (INIS)

    Medial patellar luxation is one of the most common orthopedic problems in small breeds of dogs and tibial crest deviation is a frequent accompaining anatomical abnormality. For that reason, the purpose of this study was to evaluate the behavior of castor oil derived polyurethane implants when apllied to experimental defects created on the medial side of the proximal tibia of normal puppies. Twelve dogs were randomly divided in 3 groups of 4 animals and were submitted to the same treatment. Histopathological study was performed respectively at 30 (GI), 60 (GII) and 90 (GIII) days post-surgery. Evaluations methods included clinical assessment, radiology, gross and macroscopic study, tomography and statistical analysis. Clinically, there were no signs of implant rejection. Radiology revealed intense periosteal reaction and new bone formation. On gross examination, there was thickening and lateral deviation of the tibial crest and new bone neoformation. On microscopic examination, there was fibrous tissue around the polyurethane, periosteal proliferation on the medial side of the tibia and no bone proliferation towards the implant. Cat scans reveled lateral deviation of the tibial crest in eleven animals, which was statistically significant (p<5; pared T test)

  14. Experimental determination of radiation safety of spent nuclear fuel dry storage casks CASTOR and CONSTOR

    International Nuclear Information System (INIS)

    When Ignalina NPP was built it was planned that spent nuclear fuel (SNF) will be stored at the pools for 3-5 years and after that will be transported to Russia for reprocessing or disposal. But after reestablishment of independence the situation changed totally and an urgent need arose to solve the questions related with interim storage of spent nuclear fuel in Lithuania, because storage pools were almost totally filled. Various possibilities have been analysed and finally it was decided to use dry storage technology for interim storage (up to 50 years) of Ignalina NPP spent nuclear fuel. For this purpose GNB (Germany) duel-purpose casks have been chosen. The part of them are ductile cast iron CASTOR RBMK-1500 casks and the rest part are metal-concrete CONSTOR RBMK-1500 casks. In order to evaluate radiation characteristics of the casks, combined experimental investigations (measurements of the equivalent dose and γ-spectrum on the cask surface at dry storage) and computer modeling (calculations of the equivalent dose rates, activities of nuclides, etc.) were performed. The obtained results show that equivalent dose rate values on the surface of the casks are much less than the design criteria value of 1000 μSv/h. (author)

  15. Evaluating the effect of temperature on biodiesel production from castor oil

    Directory of Open Access Journals (Sweden)

    Carlos Alberto Guerrero Fajardo

    2010-06-01

    Full Text Available Problems arising between biofuels and food as raw materials have led to investigating the use of inedible raw materials for their production. This work was aimed at studying the effect of temperature on converting castor oil in biodiesel production. Oil transesterification with methanol was carried out using an alkaline catalyst (0.5% NaOH - water solution for 1 hour using a 6:1 alcohol/oil molar ratio, at atmospheric pressure and taking temperature as a free variable. The temperature was evaluated at 68°F, 86°F, 104°F and 122ºF. The reaction products were analyzed by gas chromatography (CG-FID for quantifying the fatty acid methyl esters (FAME present. The results showed different dispersion depending on temperature, finding that 122°F resulted in less dispersion than the others. CG-FID analysis showed that most FAME content was reached at 122ºF, such temperature giving the highest ricinoleic acid conversion rate. Gas chromatography also revealed that reaction time was adequate, in process conditions, for obtaining ricinoleic acid-based 94.26% con- version.

  16. Flexural behavior of Sisal/Castor oil-Based Polyurethane and Sisal/Phenolic Composites

    Directory of Open Access Journals (Sweden)

    Andressa Cecília Milanese

    2012-04-01

    Full Text Available Natural fibers used as reinforcement of polymeric composites are interesting research subjects in polymer technology. Nowadays, these materials are being considered as a way to reinforce timber structures improvement. Fibers with larger structural applications are glass and carbon fibers, however, the use of natural fibers is an economic alternative and present many advantages such as biodegradability and having its origin from a renewable source. Castor oil, a triglyceride vegetable with hydroxyl groups, was reacted with 4,4' methylene diphenyl diisocyanate (MDI to produce the polyurethane matrix. The composites were prepared by compress molding at room temperature using woven sisal fiber as a reinforcement, with and without thermal treatment (at 60 ºC for 72 hours to the fabrics before the composites molding process. The present paper presents the preparation and a flexural caracterization of sisal/polyurethane and sisal/phenolic composites by using the three-point bending. The sisal fibers moisture content influence on the flexural behaviour was also analyzed. Experimental results showed a higher stiffness for the sisal/phenolic composite (11.2 MPa followed by the sisal/polyurethane (3.7 MPa, respectively.

  17. Accelerated artificial aging of particleboards from residues of CCB treated Pinus sp. and castor oil resin

    Directory of Open Access Journals (Sweden)

    Marília da Silva Bertolini

    2013-04-01

    Full Text Available Tests simulating exposure to severe weather conditions have been relevant in seeking new applications for particleboard. This study aimed to produce particleboards with residues of CCB (chromium-copper-boron oxides impregnated Pinus sp. and castor oil-based polyurethane resin, and to evaluate their performance before and after artificial accelerated aging. Panels were produced with different particle mass, resin content and pressing time, resulting eight treatments. Particles moisture and size distribution were determined, beyond panel physical and mechanical properties, according to NBR14810-3: 2006. After characterization, treatments B and G (small adhesive consumption and better mechanical performance, respectively were chosen to artificial aging tests. Statistical results analysis showed best performances were achieved for waterproof aged samples, of both B and G treatments. As example, in treatment B, MOR and MOE values were 23 MPa and 2,297 MPa, samples before exposure; 26 MPa and 3,185 MPa, 32 MPa and 3,982 MPa for samples after exposure (non-sealed and sealed, respectively.

  18. Preparation and characterization of activated carbon from castor de-oiled cake

    Directory of Open Access Journals (Sweden)

    Viviana M. Ospina-Guarín

    2014-01-01

    Full Text Available Biomass residues have been used to produce activated carbons. On this process, the activation method and the raw composition determine the properties as porosity and surface area of the charcoal. After the extraction of castor oil, there is a solid byproduct (cake of low added value, which was used in the production of activated carbon to add value to this waste. For this purpose two traditional methods were used, first, physical activation using as activating agents steam, CO2 and mixture of both, and additionally chemical activation using K2CO3 as the activating agent. Some activated carbons were characterized using N2 adsorption isotherms, BET surface areas varied between 255.98 (m2/g and 1218.43 (m2/g. By SEM and EDS analysis was possible to observe that materials obtained by the two types of activation are principally amorphous and morphological characteristics of the carbon obtained by physical activation are very different from those obtained by chemical activation. Finally, through impregnation of inorganic phases of Ni and Mo was revealed that the high dispersion characteristics, these carbonaceous materials will have potential to be used as catalyst support.

  19. Barge shipment and reactor handling of a castor V/21 cask

    International Nuclear Information System (INIS)

    The results of this study consist of a complete handling time/dose assessment for barge transport and reactor loading of a Castor V/21 storage cask. Observations are based on the barge transport and spent-fuel loading of storage casks at the Surry, Virginia, nuclear power plant during 1987. The minimum time required to perform all storage cask-handling activities from ship off-loading through placement of the loaded cask in at-reactor storage was 43.8 h. The addition of delays (due to backshifts not worked, etc.) resulted in a total turnaround time for the operation of ∼6 days (24 h/day). Total labor requirement was 136 person-hours. Occupational dose for these activities totaled 416 person-mrem of exposure was due to background dose, representing ∼40% of total dose. The highest dose-producing activity consisted of those steps involved with draining the loaded storage cask (i.e., installing drain pipe and pumping water from cask). This activity resulted in 75 person-mrem of exposure. Lid installation and vacuum drying of the cavity resulted in 56 person-mrem of exposure. The actual loading of spent-fuel assemblies into the storage cask was the third highest dose-contributing activity, resulting in 38 person-mrem of exposure

  20. Dry storage of the BR3 spent fuel in the CASTOR BR3 cask

    International Nuclear Information System (INIS)

    The BR3 reactor was the first PWR plant installed in Europe. Started in 1962, BR3 was definitely shut down on June 30th, 1987. Used at the beginning of its life as a training device for commercial plant operators, it was also used during its whole life as test-reactor for new fuel types and assemblies. Most of the spent fuel was stored in the deactivation pool of the plant for more than 15 years. The reactor being now in decommissioning, it was decided to remove the spent fuel from the plant. After comparison of different solutions, the long term storage in dual purpose storage casks was selected in 1997. The selected CASTOR-BR3 cask is designed as a transport and storage cask for accommodating 30 spent fuel assemblies. As a type B(U) cask fitted with shock absorbers, it meets the transport requirements according to the IAEA guidelines and fulfils also the conditions for cask storage. (author)

  1. Subcutaneous tissue reaction to castor oil bean and calcium hydroxide in rats

    Directory of Open Access Journals (Sweden)

    Samira Esteves Afonso Camargo

    2010-06-01

    Full Text Available Castor oil bean cement (COB is a new material that has been used as an endodontic sealer, and is a candidate material for direct pulp capping. OBJECTIVE: The purpose of this study was to evaluate the biocompatibility of a new formulation of COB compared to calcium hydroxide cement (CH and a control group without any material, in the subcutaneous tissue of rats. MATERIAL AND METHODS: The materials were prepared, packed into polyethylene tubes, and implanted in the rat dorsal subcutaneous tissue. Animals were sacrificed at the 7th and 50th days after implantation. A quantitative analysis of inflammatory cells was performed and data were subjected to ANOVA and Tukey's tests at 5% significance level. RESULTS: Comparing the mean number of inflammatory cells between the two experimental groups (COB and CH and the control group, statistically significant difference (p=0.0001 was observed at 7 and 50 days. There were no significant differences (p=0.111 between tissue reaction to CH (382 inflammatory cells and COB (330 inflammatory cells after 7 days. After 50 days, significantly more inflammatory cells (p=0.02 were observed in the CH group (404 inflammatory cells than in the COB group (177 inflammatory cells. CONCLUSIONS: These results demonstrate that the COB cement induces less inflammatory response within long periods.

  2. Heterosis and inbreeding depression for seed yield and its component traits in castor (Ricinus communis L.

    Directory of Open Access Journals (Sweden)

    Singh A. P., Mehta D. R. and Desale C. S.

    2013-06-01

    Full Text Available The present investigation was undertaken with a view to generate genetic information on heterosis and inbreeding depression for seed yield and its component traits. The heterosis over better parent was found significant in desirable direction for number of capsules on main raceme in JP 96 x JI 368; for length of main raceme, effective length of main raceme and number of capsules on main raceme in cross JP 96 x JI 372; and for oil content in cross JP 101 x SKI 215. Inbreeding depression was observed significant for shelling outturn, seed yield per plant and 100-seed weight in JP 96 x JI 368; for length and effective length of main raceme, number of capsules per plant and oil content in cross JP 96 x JI 372; and for days to maturity, plant height, number of nodes and 100-seed weight in cross JP 101 x SKI 215. In majority of cases, a close agreement was seen between the observed and the expected values of relative heterosis, heterobeltiosis and inbreeding depression in all the three castor crossses with few exemptions

  3. Evaluation of the Properties of Iron Oxide-Filled Castor Oil Polyurethane

    Directory of Open Access Journals (Sweden)

    Eleonora Mussatti

    2012-01-01

    Full Text Available The aim of this study was to obtain and evaluate the electrical, thermal and mechanical properties of iron oxide-filled castor oil polyurethane (PU/Fe2O3. The iron oxide used in this study was a residue derived from the steel pickling process of a Brazilian steel rolling industry. Polymeric composites with different iron oxide volume fractions (2.5, 5.0, 7.5, 10.0 and 12.5% were prepared through the casting process followed by compression molding at room temperature. The composites were analyzed by FTIR, XRD and densities, tensile strength, Young's modulus, electrical and thermal conductivities measurements. By increasing the iron oxide content, the apparent density, tensile strength, Young's modulus and electrical conductivity values of the composites were also increased. The iron oxide additions did not change significantly the value of thermal conductivity (from 0.191 W.mK-1 for PU up to 0.340 W.mK-1 for PU enriched with 12.5% v/v of iron oxide. Thus, even at the higher iron oxide concentration, the compounds as well as the pure polyurethane can be classified as thermal insulators.

  4. ROMP-based thermosetting polymers from modified castor oil with various cross-linking agents

    Science.gov (United States)

    Ding, Rui

    Polymers derived from bio-renewable resources are finding an increase in global demand. In addition, polymers with distinctive functionalities are required in certain advanced fields, such as aerospace and civil engineering. In an attempt to meet both these needs, the goal of this work aims to develop a range of bio-based thermosetting matrix polymers for potential applications in multifunctional composites. Ring-opening metathesis polymerization (ROMP), which recently has been explored as a powerful method in polymer chemistry, was employed as a unique pathway to polymerize agricultural oil-based reactants. Specifically, a novel norbornyl-functionalized castor oil alcohol (NCA) was investigated to polymerize different cross-linking agents using ROMP. The effects of incorporating dicyclopentadiene (DCPD) and a norbornene-based crosslinker (CL) were systematically evaluated with respect to curing behavior and thermal mechanical properties of the polymers. Isothermal differential scanning calorimetry (DSC) was used to investigate the conversion during cure. Dynamic DSC scans at multiple heating rates revealed conversion-dependent activation energy by Ozawa-Flynn-Wall analysis. The glass transition temperature, storage modulus, and loss modulus for NCA/DCPD and NCA/CL copolymers with different cross-linking agent loading were compared using dynamic mechanical analysis. Cross-link density was examined to explain the very different dynamic mechanical behavior. Mechanical stress-strain curves were developed through tensile test, and thermal stability of the cross-linked polymers was evaluated by thermogravimetric analysis to further investigate the structure-property relationships in these systems.

  5. Gamma radiation effects on mechanical properties and morphology of a polyurethane derivate from castor oil

    Science.gov (United States)

    Azevedo, Elaine Cristina; Orivaldo Chierice, Gilberto; Claro Neto, Salvador; Scheidegger Soboll, Daniel; Mauro Nascimento, Eduardo; Lepienski, Carlos Mauricio

    2011-03-01

    In this study, an adhesive of a polyurethane derivate from castor oil was irradiated with gamma radiation from a 60Co source, at doses from 0.2 to 25 kGy. This adhesive polyurethane is considered for use in hospital furniture because it does not liberate dangerous solvents. Hardness and elastic modulus were measured by instrumented indentation with a pyramidal Berkovich indenter, using loads from 0.08-40 mN with a nanoindenter XP. The instrumented indentation hardness was 110 MPa for an untreated sample, increasing to 124 MPa after irradiation with 25 kGy, at penetration depths of about 5 μm. The increases in elastic modulus induced by radiation were less pronounced. This polyurethane is naturally cross-linked and the relative modifications in the hardness are attributed to an additional cross-linking process induced by radiation. X-ray diffraction indicates a slight increase in crystallinity. The roughness measured by atomic force microscopy increases after gamma irradiation.

  6. The role of nanocrystalline cellulose on the microstructure of foamed castor-oil polyurethane nanocomposites.

    Science.gov (United States)

    Cordero, Andrés Ignacio; Amalvy, Javier Ignacio; Fortunati, Elena; Kenny, José María; Chiacchiarelli, Leonel Matías

    2015-12-10

    Nanocrystalline cellulose (CNC), obtained by sulphuric acid hydrolysis, was used to synthesize polyurethane foams (PUFs) based on a functionalized castor oil polyol and a Methylene diphenyl diisocyanate (MDI). Formulations with varying isocyanate index (FI) and NCO number were prepared. At 0.5 wt.%, SEM's of the fractured surface underlined that the CNC acted both as a nucleation agent and as a particulate surfactant with cell geometries and apparent density changing selectively. The chemical structure of the PUF (FTIR) changed after the incorporation of CNC by a relative change of the amount of urea, urethane and isocyanurate groups. A low NCO number and isocyanate index contributed to the migration of the CNC to the Hard Segment (HS), acting as reinforcement and improving substantially the compressive mechanical properties (Ec and σc improvements of 63 and 50%, respectively). For a high NCO number or isocyanate index, the CNC migrated to the Soft Segment (SS), without causing a reinforcement effect. The migration of the CNC was also detected with DSC, TGA and DMA, furtherly supporting the hypothesis that a low NCO number and index contributed both to the formation of a microstructure with a higher content of urethane groups. PMID:26428106

  7. The emulsion crystallization of hydrogenated castor oil into long thin fibers

    Science.gov (United States)

    De Meirleir, Niels; Pellens, Linda; Broeckx, Walter; De Malsche, Wim

    2013-11-01

    The present study discusses the optimal crystal growth conditions required for the emulsion crystallization of hydrogenated castor oil (HCO) into several crystal morphologies. The best possible crystal shape is furthermore identified in case high rheology modifying performance is required. HCO was crystallized in a meso- and micro-continuous process which allowed for a controlled and fast screening of several crystal morphologies at different crystallization conditions. Applying high isothermal temperatures (above 55 °C) resulted in a combination of rosettes, thick fibers and thin fibers. At lower isothermal temperatures (below 55 °C) the shape gradually evolved to a combination of short needles, spherically shaped and/or irregularly shaped crystals. Crystals with the highest aspect ratio were obtained when crystals were grown between 30 °C and 45 °C and were subsequently reheated above 63 °C, forming high amounts of large thin fibrous crystals. When diluted to 0.25 wt% these fibrous crystals increased the low shear viscosity far better compared to the other crystal shapes.

  8. Evaluation of the properties of iron oxide-filled castor oil polyurethane

    Directory of Open Access Journals (Sweden)

    Eleonora Mussatti

    2013-02-01

    Full Text Available The aim of this study was to obtain and evaluate the electrical, thermal and mechanical properties of iron oxide-filled castor oil polyurethane (PU/Fe2O3. The iron oxide used in this study was a residue derived from the steel pickling process of a Brazilian steel rolling industry. Polymeric composites with different iron oxide volume fractions (2.5, 5.0, 7.5, 10.0 and 12.5% were prepared through the casting process followed by compression molding at room temperature. The composites were analyzed by FTIR, XRD and densities, tensile strength, Young's modulus, electrical and thermal conductivities measurements. By increasing the iron oxide content, the apparent density, tensile strength, Young's modulus and electrical conductivity values of the composites were also increased. The iron oxide additions did not change significantly the value of thermal conductivity (from 0.191 W.mK-1 for PU up to 0.340 W.mK-1 for PU enriched with 12.5% v/v of iron oxide. Thus, even at the higher iron oxide concentration, the compounds as well as the pure polyurethane can be classified as thermal insulators.

  9. Water solubility enhancements of PAHs by sodium castor oil sulfonate microemulsions

    Institute of Scientific and Technical Information of China (English)

    ZHU Li-zhong; ZHAO Bao-wei; LI Zong-lai

    2003-01-01

    Water solubility enhancements of naphthalene(Naph), phenantherene(Phen) and pyrene(Py) in sodium castor oil sulfonate(SCOS) microemulsions were evaluated. The apparent solubilities of PAHs are linearly proportional to the concentrations of SCOS microemulsion, and the enhancement extent by SCOS solutions is greater than that by ordinary surfactants on the basis of weight solubilization ratio(WSR). The logKem values of Naph, Phen, and Py are 3.13, 4.44 and 5.01 respectively, which are about the same as the logKow values. At 5000 mg/L of SCOS conccentration, the apparent solubilities are 8.80, 121, and 674 times as the intrinsic solubilities for Naph, Phen, and Py. The effects of inorganic ions and temperature on the solubilization of solutes are also investigated. The solubilization is improved with a moderate addition of Ca2+, Na+, NH4+ and the mixture of Na+, K+, Ca2+, Mg2+ and NH4+. WSR values are enhanced by 22.0% for Naph, 23.4% for Phen, and 24.6% for Py with temperature increasing by 5℃. The results indicated that SCOS microemulsions improve the performance of the surfactant-enhanced remediation(SER) of soil, by increasing solubilities of organic pollutants and reducing the level of surfactant pollution and remediation expenses.

  10. Effects of compression ratio on variation of stresses and residual oil of cake in pressing process of castor beans and its curve fitting

    Institute of Scientific and Technical Information of China (English)

    刘汝宽; 许方雷; 肖志红; 李昌珠; 李辉; 曾凡涛; 叶红齐

    2015-01-01

    The relationships among compression ratio and stress, compression ratio and residual oil of cake in pressing process of castor beans were studied using the test equipment under different states of oilseeds and ways of pressing manners. The results show that variation of stress increases nonlinearly and residual oil rate decreases with the increase of compression ratio. Lower residual oil of cake was obtained by pressing gently and frequently. Curve fitting on both relationships had been built and parameters for the model were obtained by least square procedure and deepening research on pressing process of the castor beans for castor oil. By assuming that the value of oil production is equivalent to the value of energy consumption, the critical compression ratio of intact seeds is 6.2 while that of crushed seeds is 3.6.

  11. Síntesis de espumas rígidas de poliuretano obtenidas a partir de aceite de castor y poliglicerol empleando calentamiento por microondas Synthesis of rigid polyurethane foams obtained from castor oil and polyglycerol using microwave heating

    OpenAIRE

    Paula Mazo; Omar Yarce; Luis A Rios

    2011-01-01

    En este trabajo se realizó la síntesis de espumas rígidas de poliuretano utilizando un macropoliol sintetizado a partir de aceite de castor y poliglicerol, se optimizó mediante un análisis de superficie de respuesta, empleando un diseño factorial 32, los factores evaluados fueron: cantidad de agua y de ácido tartárico, el cual actúa como agente entrecruzante y catalizador; se evalúaron las propiedades mecánicas de las espumas como: densidad aparente (ASTM D1622-08), resistencia a la compresió...

  12. Síntesis y caracterización de espumas flexibles de poliuretano obtenidas a partir de aceite de castor maleinizado Flexible polyurethane foam synthesis and characterization obtained from maleinizated castor oil

    OpenAIRE

    Paula Mazo; RIOS, LUIS A.; Diana Estenoz

    2009-01-01

    En este trabajo se realiza la síntesis de espumas flexibles de poliuretano empleando un diseño experimental Taguchi, utilizando aceite de castor con y sin maleinización, se estudia la cinética de la reacción de esterificación del aceite por cuantificación de los grupos ácido (ASTM D4662 - 03) y se evalúan las propiedades mecánicas de las espumas (densidad, resistencia tensil, % elongación, resiliencia y dureza. Norma NTC 2019 Icontec) obtenidas en función de las variables de síntesis (cantida...

  13. Síntesis y caracterización de adhesivos reposicionables de poliuretano dispersos en agua, obtenidos a partir de aceite de castor maleinizado Synthesis and characterization of pressure-sensitive adhesives of waterborne polyurethane from maleinizated castor oil

    OpenAIRE

    Paula Mazo; Lysa López; David Restrepo; Luis Rios

    2010-01-01

    El presente trabajo se centró en la producción de dispersiones acuosas de poliuretano empleando el método de emulsificación por inversión de fases. Para la síntesis fueron empleados dos polioles: uno comercial tipo poliéster y el otro es aceite de castor maleinizado (MACO); dos diisocianatos, uno aromático Toluen diisocianato (TDI) y otro alifático Hexametilen diisocianato (HDI), siendo poco comunes para esta aplicación. Como emulsificante interno se empleó ácido cítrico el cual es muy económ...

  14. Intake, nutrient apparent digestibility and ruminal constituents of sheep fed diets with canola, sunflower or castor oils

    Directory of Open Access Journals (Sweden)

    Michelle de Oliveira Maia

    2012-11-01

    Full Text Available The objective in this experiment was to determine the effects of feeding diets with canola, sunflower or castor oils on intake, nutrient apparent digestibility and ruminal constituents of crossbred Dorper × Santa Inês sheep. Four rumen-cannulated animals of 90.2±11.4 kg average body weight were assigned to a 4 × 4 latin square. Animals remained individually in cages for the metabolism assay and were fed diets containing roughage at 500 g/kg and concentrate based on ground corn and soybean meal also at 500 g/kg. No oil was added to the control diet, whereas the others had canola, sunflower or castor oils at 30 g/kg (DM basis. There was no difference for the intake of DM and nutrients, except for ether extract, which was greater when animals received oil. The digestibility coefficients of dry matter, organic matter, crude protein, non-fiber carbohydrates and neutral detergent fiber were not changed; however, the addition of oil increased the ether extract digestibility. The values of total digestible nutrients (TDN, g/kg of DM, digestible energy (DE, Mcal/kg of DM, TDN intake and DE intake also did not change with the addition of lipids. Concerning the ruminal constituents, the addition of vegetable oils reduced the concentrations of acetate, butyrate and total short-chain fatty acids. Adding canola, sunflower or castor oils at 30 g/kg in diets with 500 g roughage/kg and 500 g concentrate/kg does not impair the intake or digestibility of nutrients in sheep, although it reduces the concentration of short-chain fatty acids in the rumen.

  15. HETEROSIS AND COMBINING ABILITY FOR YIELD AND YIELD COMPONENT CHARACTERS OF NEWLY DEVELOPED CASTOR (RICINUS COMMUNIS L. HYBRID

    Directory of Open Access Journals (Sweden)

    M RAMESH

    2013-12-01

    Full Text Available The estimates of the components of genetic variation were worked out by Kempthorne method from a Line x Tester analysis in castor for fourteen plant type related traits. The analysis for combining ability revealed significant mean sum of squares of both general combining ability (GCA and specific combining ability (SCA for all the characters which indicated the presence of both additive and non-additive gene actions. The ratio of GCA variance and SCA variance ratio revealed the predominance of non-additive gene action for all the traits except plant height up to primary spike, no. of nodes up to primary spike, no. of capsules/primary spike and total spike length of secondary. JP-87 was good general combiner for most of the characters including seed yield. The line DCS-106 was also a good general combiner for early flowering, days to maturity and number of capsules on secondary spike. Cross JP-87 × RG-1740/A was a good specific combiner for seed yield per plant and for other yield component. The hybrid DPC-9 × RG-156 with good specific combining ability for days to maturity can be used for yield improvement in castor. In general for yield and other yield attributing traits the promising hybrids with high heterosis were JP-87 × RG-1740/A, JP-87 × DCS-106, DPC-17 × RG-156, DPC-17 × DCS-106 and DPC-17 × DCS-107 were on par with the check. These cross combinations could be utilized for further use in breeding programme for improvement in yield of castor.

  16. Productive performance and efficiency of utilization of the diet components in dairy cows fed castor meal treated with calcium oxide

    OpenAIRE

    Juliana Variz Cobianchi; André Soares de Oliveira; José Maurício de Souza Campos; Amanda Vasconcelos Guimarães; Sebastião de Campos Valadares Filho; Flávio Pereira Cobianchi; Thalita Evani Silva de Oliveira

    2012-01-01

    The effect of replacing of 0; 0.33; 0.67 and 1.0 (kg/kg) of soybean meal (SBM) by undecorticated castor seed meal treated with calcium oxide (CMT - 60 g/kg) was evaluated on performance and efficiency of nutrient utilization in dairy cows. Sixteen Holstein and crossbred cows were distributed in four 4 × 4 latin squares. Animals received concentrated feed at a ratio of 1 kg for 3 kg of milk produced, in the natural matter. The diets had the same amount of nitrogen (150.4 g crude protein/kg DM)...

  17. Interpenetrating polymer networks based on polyol modified castor oil polyurethane and poly(2-hydroxyethylmethacrylate): Synthesis, chemical, mechanical and thermal properties

    Indian Academy of Sciences (India)

    K Prashantha; K Vasanth Kumar Pai; B S Sherigara; S Prasannakumar

    2001-10-01

    Interpenetrating polymer networks (IPNs) of glycerol modified castor oil polyurethane (GC–PU) and poly[2-hydroxyethylmethacrylate] (PHEMA) were synthesized using benzoyl peroxide as initiator and N,N-methylene bis acrylamide as crosslinker. GC–PU/PHEMA interpenetrating polymer networks were obtained by transfer moulding. These were characterized with respect to their resistance to chemical reagents and mechanical properties such as tensile strength, per cent elongation and shore A hardness. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were undertaken for thermal characterization. The changes in NCO/OH ratio and GC–PU/PHEMA composition on the properties of the IPNs were studied.

  18. Solid dispersions with hydrogenated castor oil increase solubility, dissolution rate and intestinal absorption of praziquantel

    Directory of Open Access Journals (Sweden)

    Marco Vinicius Chaud

    2010-09-01

    Full Text Available The solubility behavior of drugs remains one of the most challenging aspects in formulation development. Solid Dispersion (SD has tremendous potential for improving drug solubility. Although praziquantel (PZQ is the first drug of choice in the treatment of schistosomiasis, its poor solubility has restricted its delivery oral route. In spite of its poor solubility, PZQ is well absorbed in the gastrointestinal tract, but large doses are required to achieve adequate concentration at the target sites. The aim of this study was to improve the solubility and dissolution rate of PZQ and to evaluate its intestinal absorption. SDs were formulated with PEG-60 castor oil hydrogenated (CR-60 using a fusion and evaporation method. Pure PZQ and physical mixtures (PM and PZQ-CR-60 (2:1; 1:1; 1:2 ratios were compared as regards their solubility, dissolution and intestinal absorption. The experimental results demonstrated the improvement in the solubility, dissolution rate and intestinal absorption. In addition, the solubility behavior showed pH dependency and that the solubility of PZQ was slower in acidic medium than in neutral and basic mediums. The increase in PZQ solubility of the SD with the CR-60 could be attributed to several factors such as improved wettability, local solubilization, drug particle size reduction and crystalline or, interstitial solid solution reduction.A solubilidade de fármacos ainda é um dos principais desafios no desenvolvimento de formulações farmacêuticas. As dispersões sólidas (DS apresentam grande potencial para melhorar a solubilidade de fármacos. O praziquantel é o fármaco de primeira escolha no tratamento da esquistossomose, contudo a baixa solubilidade em água restringe seu uso à administração pela via oral. Apesar da baixa solubilidade, o PZQ é bem absorvido através do trato gastrintestinal, mas doses orais elevadas são requeridas para garantir concentrações suficientes de fármaco para o tecido alvo. O

  19. Die Bedeutung des instrumentalen Spiels im Höllenakt aus Rameaus Castor et Pollux

    Directory of Open Access Journals (Sweden)

    Büttner, Fred

    2013-12-01

    Full Text Available In modern Music History the continuity of instrumental playing gets increasingly broken up and changes into discontinuity – a process which, in the works of the Viennese Classic, culminates in a compositional mindset that brings the continuous instrumental fl ow and its abrupt break-up to ideal balance. A significant stadium in this development is formed by the music of "Opera buffa" as new genre in the first half of the eighteenth century, as it is represented by Pergolesi’s Serva padrona. On the other hand the French contribution, which makes itself felt with Rameau’s "Tragédies en musique", should not be neglected. A detailed study of the Hell Act from Castor et Pollux shows that also in the works of Rameau instrumental playing, even if it is able to realize, with its at times disquieting motivity, once again the old continuity of instrumental music, gets repeatedly stroken by discontinuity, in which the exciting actions on the stage find their musical expression.[de] In der neueren Musikgeschichte wird das Kontinuum des instrumentalen Spiels zunehmend aufgebrochen und in Diskontinuität verwandelt – ein Vorgang, der mit dem Schaffen der Wiener Klassik in einer kompositorischen Faktur gipfelt, in der die fortlaufende Spielbewegung im Taktsystem und deren abruptes Aufbrechen zu idealem Ausgleich gebracht werden. Eine wesentliche Station auf diesem Entwicklungsgang bildet, wie Thrasybulos Georgiades anschaulich gezeigt hat, die Musik der "Opera buffa" als neuer Gattung in der ersten Hälfte des 18. Jahrhunderts, wie sie namentlich durch Pergolesis Serva padrona vertreten wird. Darüber sollte man jedoch den französischen Anteil nicht vernachlässigen, der sich in Rameaus "Tragédies en musique" eindrucksvoll zu Wort meldet. Eine Betrachtung des Höllenakts aus Castor et Pollux macht deutlich, dass auch bei Rameau das instrumentale Spiel, obwohl es mit seiner zuweilen beunruhigenden Motorik noch einmal das alte Kontinuum der

  20. Quantifying the dynamic transition of hydrogenated castor oil gels measured via multiple particle tracking microrheology.

    Science.gov (United States)

    Wehrman, Matthew D; Lindberg, Seth; Schultz, Kelly M

    2016-08-14

    Rheological modifiers are essential ingredients in commercial materials that exploit facile and repeatable phase transitions. Although rheological modifiers are used to change flow behavior or quiescent stability, the complex properties of particulate gels during dilution is not well studied. We characterize a dynamically evolving colloidal gel, hydrogenated castor oil (HCO), a naturally sourced material, used in consumer products. This HCO scaffold consists of fibrous colloids, a surfactant (linear alkylbenzene sulfonate) and water. The gel undergoes critical transitions, degradation and formation, in response to an osmotic pressure gradient. Multiple particle tracking microrheology (MPT) measures the evolving material properties. In MPT, fluorescent probe particles are embedded into the sample and Brownian motion is measured. MPT data are analyzed using time-cure superposition, identifying critical transition times and critical relaxation exponents for degradation and formation where tc,deg = 102.5 min, ndeg = 0.77 ± 0.09, tc,for = 31.9 min, and nfor = 0.94 ± 0.11, respectively. During degradation and formation HCO gels evolve heterogeneously, this heterogeneity is characterized spatially and temporally. Heterogeneity of the gel is quantified by comparing variances of single particle van Hove correlation functions using an F-test with a 95% confidence interval. HCO transitions have rheological heterogeneous microenvironments that are homogeneously distributed throughout the field of view. Although HCO gels do evolve heterogeneously, this work determines that these heterogeneities do not significantly change traditional MPT measurements but the analysis techniques developed provide additional information on the unique heterogeneous scaffold microenvironments. This creates a toolbox that can be widely applied to other scaffolds during dynamic transitions. PMID:27396611

  1. Bacterial and Archaeal Diversity in the Gastrointestinal Tract of the North American Beaver (Castor canadensis)

    Science.gov (United States)

    Gruninger, Robert J.; McAllister, Tim A.; Forster, Robert J.

    2016-01-01

    The North American Beaver (Castor canadensis) is the second largest living rodent and an iconic symbol of Canada. The beaver is a semi-aquatic browser whose diet consists of lignocellulose from a variety of plants. The beaver is a hindgut fermenter and has an enlarged ceacum that houses a complex microbiome. There have been few studies examining the microbial diversity in gastrointestinal tract of hindgut fermenting herbivores. To examine the bacterial and archaeal communities inhabiting the gastrointestinal tract of the beaver, the microbiome of the ceacum and feaces was examined using culture-independent methods. DNA from the microbial community of the ceacum and feaces of 4 adult beavers was extracted, and the16S rRNA gene was sequenced using either bacterial or archaeal specific primers. A total of 1447 and 1435 unique bacterial OTUs were sequenced from the ceacum and feaces, respectively. On average, the majority of OTUs within the ceacum were classified as Bacteroidetes (49.2%) and Firmicutes (47.6%). The feaces was also dominated by OTUs from Bacteroidetes (36.8%) and Firmicutes (58.9%). The composition of bacterial community was not significantly different among animals. The composition of the ceacal and feacal microbiome differed, but this difference is due to changes in the abundance of closely related OTUs, not because of major differences in the taxonomic composition of the communities. Within these communities, known degraders of lignocellulose were identified. In contrast, to the bacterial microbiome, the archaeal community was dominated by a single species of methanogen, Methanosphaera stadtmanae. The data presented here provide the first insight into the microbial community within the hindgut of the beaver. PMID:27227334

  2. Diametral tensile strength and film thickness of an experimental dental luting agent derived from castor oil

    Directory of Open Access Journals (Sweden)

    Juliana Cabrini Carmello

    2012-02-01

    Full Text Available The need to develop new dental luting agents in order to improve the success of treatments has greatly motivated research. OBJECTIVE: The aim of this study was to evaluate the diametral tensile strength (DTS and film thickness (FT of an experimental dental luting agent derived from castor oil (COP with or without addition of different quantities of filler (calcium carbonate - CaCO3. MATERIAL AND METHODS: Eighty specimens were manufactured (DTS N=40; FT N=40 and divided into 4 groups: Pure COP; COP 10%; COP 50% and zinc phosphate (control. The cements were mixed according to the manufacturers' recommendations and submitted to the tests. The DTS test was performed in the MTS 810 testing machine (10 KN, 0.5 mm/min. For FT test, the cements were sandwiched between two glass plates (2 cm² and a load of 15 kg was applied vertically on the top of the specimen for 10 min. The data were analyzed by means of one-way ANOVA and Tukey's test (α=0.05. RESULTS: The values of DTS (MPa were: Pure COP- 10.94±1.30; COP 10%- 30.06±0.64; COP 50%- 29.87±0.27; zinc phosphate- 4.88±0.96. The values of FT (µm were: Pure COP- 31.09±3.16; COP 10%- 17.05±4.83; COP 50%- 13.03±4.83; Zinc Phosphate- 20.00±0.12. One-way ANOVA showed statistically significant differences among the groups (DTS - p=1.01E-40; FT - p=2.4E-10. CONCLUSION: The experimental dental luting agent with 50% of filler showed the best diametral tensile strength and film thickness.

  3. A novel solubilization of phenanthrene using Winsor I microemulsion-based sodium castor oil sulfate.

    Science.gov (United States)

    Zhao, Baowei; Zhu, Lizhong; Gao, Yanzheng

    2005-03-17

    Problems associated with polycyclic aromatic hydrocarbons (PAHs) contaminated site in environmental media have received increasing attention. Ex situ soil washing is commonly used for treating contaminated soils by separating the most contaminated fraction of the soil for disposal. Surfactant-enhanced soil washing is being considered with increasing frequency to actually achieve soil-contaminant separation. In this research, a novel solubilization of phenanthrene and extraction of phenanthrene from spiked soil by sodium castor oil sulfate (SCOS) microemulsion was presented and compared with the conventional surfactants, Triton X-100 (TX100), Tween 80 (TW80), Brij35, sodium dodecylbenzene sulfonate (SDBS) and sodium dodecyl sulfate (SDS). Unlike conventional surfactants, SCOS forms stable microemulsion in water and thus behaves much like a separate bulk phase in concentrating organic solutes. The extent of solubility enhancement is linearly proportional to the concentration of SCOS microemulsion, in contrast with the effect of a conventional surfactant in which a sharp inflection occurs in the vicinity of the measured critical micelle concentration. SCOS microemulsion exhibits the largest mass solubilization ratio among the selected surface active agents (SAAs) in both soil-free system and soil-water system. The partitioning coefficients of phenanthrene between the emulsified phase and the aqueous phase, Kem, is slightly larger than those between the micellar pseudo phase and the aqueous phase, Kmc. The extraction experiments demonstrate high and fast desorption of phenanthrene from spiked soil by SCOS microemulsion perhaps due to its high solubilization capacity compared with the conventional surfactant solutions. The results show that SCOS could be an attractive alternative to synthetic surfactants in ex situ washing for PAH-contaminated soils. PMID:15752867

  4. Stichorchis subtriquetrus (Digenea: Paramphistomatidae) from Eurasian beaver (Castor fiber) in the Czech Republic.

    Science.gov (United States)

    Máca, Ondřej; Pavlásek, Ivan; Vorel, Aleš

    2015-08-01

    Between March 2012 and April 2014, we performed post-mortem parasitological examinations of 11 Eurasian beavers (Castor fiber Linnaeus, 1758) from the basins of four main rivers (Dyje, Labe, Morava, Vltava) in the Czech Republic. The cause of death of five adult animals was unknown, three adult animals died after being hit by cars, while one young and one adult as a result of serious injuries and one juvenile male drowned. The trematode Stichorchis subtriquetrus (Rudolphi, 1814) Lühe, 1909 was only found in the caecum body and caecum apex of nine beavers (82%), with no significant differences in parasite intensity among beavers. The highest number of trematodes (271) occurred in an adult female in July 2013; while a range of 1-57 individuals were found in other positive beavers. S. subtriquetrus size in both parts of the caecum was 11.0-17.0 × 5.5-8.0 mm (mean 14.3 × 6.9 mm). Results demonstrated that for the optimal detection of eggs, it was necessary to examine at least 10 g of faeces with a new modified method of sedimentation. The size range of 30 eggs was 157.1-182.5 × 99.3-109.8 μm (mean 168.0 × 104.4 μm). There were no differences in prevalence and seasonal occurrence of S. subtriquetrus between male and female beavers. We did not find any other intestinal endoparasites or tissue parasites (Sarcocystis spp., Trichinella spp.). PMID:25916466

  5. Removal of cadmium from aqueous solution using castor seed hull: a kinetic and equilibrium study

    Energy Technology Data Exchange (ETDEWEB)

    Sen, Tushar Kanti [Department of Chemical Engineering, Curtin University of Technology, Perth (Australia); Mohammod, Masita; Maitra, Saikat [Chemical Engineering Department, Universiti Teknologi Petronas, Petronas (Malaysia); Dutta, Binay K. [Chemical Engineering Program, Petroleum Institute, Abu Dhabi (United Arab Emirates)

    2010-09-15

    The effects of various parameters such as initial concentration, adsorbent loading, pH, and contact time on kinetics and equilibrium of adsorption of Cd{sup 2+} metal ion from its aqueous solution by castor seed hull (CSH) and also by activated carbon have been investigated by batch adsorption experiments. The amount of adsorption increases with initial metal ion concentration, contact time, solution pH, and the loading of adsorbent for both the systems. Kinetic experiments indicate that adsorption of cadmium metal ion on both CSH and on activated carbon consists of three steps - a rapid adsorption of cadmium metal ion, a transition phase, and an almost flat plateau region. This has also been confirmed by the intraparticle diffusion model. The lumped kinetic results show that the cadmium adsorption process follows a pseudo-second order rate law. The kinetic parameters including the rate constant are determined at different initial metal ion concentrations, pH, amount, and type of adsorbent, respectively. The Langmuir and Freundlich adsorption isotherm models are used to describe the experimental data. The Langmuir model yields a better correlation coefficient than the other model. A comparison of the monolayer adsorption capacity (q{sub m}) of CSH, activated carbon, and several other reported adsorbents has been provided. The value of separation factor (R{sub L}) calculated from the Langmuir equation also gives an indication of favorable adsorption of the metal ion. From comparative studies, it has been found that CSH is a potentially attractive adsorbent than commercial activated carbon for cadmium metal ion (Cd{sup 2+}) removal. (Abstract Copyright [2010], Wiley Periodicals, Inc.)

  6. Optimizing row spacing and plant population arrangement for a new short-height castor genotype in fall-winter

    Directory of Open Access Journals (Sweden)

    Genivaldo David de Souza-Schlick

    2014-08-01

    Full Text Available Plant population and arrangement should be properly designed to maximize the seed yield of short-height genotypes of castor (Ricinus communis L. in each cropping season. Experiments were performed in the in the fall-winter cropping season of 2008 and 2009 in Botucatu, State of São Paulo, Brazil, to evaluate the effects of row spacing (0.45, 0.60, 0.75, and 0.90 m and plant population (25,000, 40,000, 55,000, and 70,000 plants ha-1 on agronomical traits, yield components, seed yield, and oil yield of the genotype FCA-PB. A high plant density caused a reduction in plant survival and increased the first raceme insertion height, particularly in the year with the higher rainfall. The basal stem diameter, number of racemes per plant, and seeds per raceme were reduced by increasing the plant density. However, the seed and oil yields were minimally influenced by plant population density and row spacing because the castor plant compensated for a low plant population with a high number of racemes and seeds. The maximum seed yield was achieved with an estimated 0.64 m of row spacing and 50,107 plants ha-1 (i.e., 3.2 plants m-1.

  7. Fractional characterisation of jatropha, neem, moringa, trisperma, castor and candlenut seeds as potential feedstocks for biodiesel production in Cuba

    Energy Technology Data Exchange (ETDEWEB)

    Martin, Carlos [Bioresource Technology group, Department of Chemistry and Chemical Engineering, University of Matanzas, Autopista a Varadero, km 3, Matanzas 44740 (Cuba); Department of Chemical Engineering, University of Vigo (Campus Ourense), Polytechnical Building, As Lagoas, 32004 Ourense (Spain); Moure, Andres; Dominguez, Herminia; Parajo, Juan C. [Department of Chemical Engineering, University of Vigo (Campus Ourense), Polytechnical Building, As Lagoas, 32004 Ourense (Spain); Martin, Giraldo [Experimental Station of Pastures and Forages ' ' Indio Hatuey' ' , Central Espana Republicana, CP 44280, Matanzas (Cuba); Carrillo, Eugenio [Biomass Energy Department, National Renewable Energy Centre (CENER), Ciudad de la Innovacion 4, Sarriguren, 31621 Pamplona (Spain)

    2010-04-15

    A preliminary investigation on the suitability of various non-edible oil seeds for the integral utilisation of their fractions for production of biodiesel and other products was carried out. The oil seeds considered were jatropha (Jatropha curcas), neem (Azadirachta indica), moringa (Moringa oleifera), trisperma (Aleurites trisperma), castor beans (Ricinus communis) and candlenut (Aleurites moluccana). The highest oil content (62.0% (w/w)) was found in trisperma seeds, but the use of that oil for biodiesel production is restricted by its high content of polyunsaturated fatty acids. The oils of castor beans and moringa contained 86.0% of ricinoleic acid and 70.6% of oleic acid, respectively, while in the oils from the other seeds no predominance of any acid was observed. According to the oil yield and to the fatty acid composition of the oil, jatropha was identified as the most promising oil seed for biodiesel production in Cuba. All the press cakes were rich in protein, the highest content (68.6%) being detected in moringa cake. The investigation revealed that the husks of neem and moringa can be considered potential substrates for ethanol production due to their high cellulose content (approximately 30%). A high concentration (4.3%) of acetyl groups was found in neem husks, what is favourable for the hydrolytic conversion of polysaccharides to simple sugars. A high protein content (15.2%) was detected in moringa husks, which is a positive feature for lowering the cost of nutrient supplementation in ethanolic fermentation. (author)

  8. Synthesis and Physicochemical Behaviour of Polyurethane-Multiwalled Carbon Nanotubes Nanocomposites Based on Renewable Castor Oil Polyols

    Directory of Open Access Journals (Sweden)

    Alaa Ali

    2014-01-01

    Full Text Available Polyurethanes (PUs are high performance materials, with vast industrial and engineering applications. In this research, effects of Multiwalled Carbon Nanotubes (MWCNTs on physicochemical properties of Castor Oil based Polyurethanes (COPUs were studied. MWCNTs were added in different weight percentages (0% to 1% wt in a castor oil based polyurethane (COPUs-MWCNTs nanocomposites. The composition, structure, and morphology of polyurethanes were characterized by Fourier transform infrared spectroscopy (FTIR, X-ray diffraction (XRD, scanning electron microscopy (SEM, field emission scanning electron microscopy (FESEM, and element detection by energy dispersive spectroscopy (EDX analysis, respectively. Thermal stability was studied by thermogravimetric analysis (TGA. Barrier properties and surface area studies were investigated by nitrogen permeability machine and BET technique. Mechanical properties were calculated by tensile universal testing machine. Results showed well dispersed MWCNTs in polyurethane matrix at different weight percentages. The best results were obtained with 0.3 wt% of MWCNTs in the composite. Surface area studies revealed presence of very few pores which is in a good agreement with barrier permeability, reduced up to ~68% in 1 wt% and ~70% in 0.5 wt% of MWCNTs in polymer matrix, with respect to pure COPUs samples.

  9. A COMPARATIVE STUDY OF CASTOR AND JATROPHA OIL SOURCE AND ITS METHYL ESTER TEST ON THE DIESEL ENGINE

    Directory of Open Access Journals (Sweden)

    DEVENDRA VASHIST,

    2011-06-01

    Full Text Available Neat non-edible oils pose problems when subjected to use when used in the CI engines. These problems are attributed to high viscosity, low volatility and polyunsaturated character of these oils. Two non-edible sources of the oils were identified i.e jatropha and castor. The biodiesel was prepared from neat oils and blends preparedwith diesel. up till 20 percent of biodiesel. Produced blends were tested for their use as a substitute fuel for diesel in a single cylinder diesel engine at varying loads. The best engine operating condition based on lower brake specific fuel consumption and higher brake thermal efficiency were identified and compared. On the observed data for both the fuels, Chi square (2 statistical test was applied. The values calculated for 2 jatropha oil methyl ester (JOME = 0.0104 and 2 castor oil methyl ester (COME = 0.0524. The values concluded that there is no effect of fuel type on fuel consumption up till 20 percent biodiesel blended fuel.

  10. A Novel Methodology for the Synthesis of Acyloxy Castor Polyol Esters: Low Pour Point Lubricant Base Stocks.

    Science.gov (United States)

    Kamalakar, Kotte; Mahesh, Goli; Prasad, Rachapudi B N; Karuna, Mallampalli S L

    2015-01-01

    Castor oil, a non-edible oil containing hydroxyl fatty acid, ricinoleic acid (89.3 %) was chemically modified employing a two step procedure. The first step involved acylation (C(2)-C(6) alkanoic anhydrides) of -OH functionality employing a green catalyst, Kieselguhr-G and solvent free medium. The catalyst after reaction was filtered and reused several times without loss in activity. The second step is esterification of acylated castor fatty acids with branched mono alcohol, 2-ethylhexanol and polyols namely neopentyl glycol (NPG), trimethylolpropane (TMP) and pentaerythritol (PE) to obtain 16 novel base stocks. The base stocks when evaluated for different lubricant properties have shown very low pour points (-30 to -45°C) and broad viscosity ranges 20.27 cSt to 370.73 cSt, higher viscosity indices (144-171), good thermal and oxidative stabilities, and high weld load capacities suitable for multi-range industrial applications such as hydraulic fluids, metal working fluids, gear oil, forging and aviation applications. The study revealed that acylated branched mono- and polyol esters rich in monounsaturation is desirable for developing low pour point base stocks. PMID:26582154

  11. Effect of Hydro-Alcoholic Extract of Teucrium Polium on Castor Oil-Induced Diarrhea in Male Rat

    Directory of Open Access Journals (Sweden)

    Mohammad Allahtavakoli

    2013-06-01

    Full Text Available Background: Diarrhea is one of the world's health problems as the most common causes of death in children. In this study, the effect of Teucrium Polium (TP extract on diarrhea induced by castor oil has been studied. Materials and Methods: 30 male rats were divided into five equal groups containing extract with doses of 100, 200 and 600 mg/kg; diphenoxylate (5 mg/kg; and control group or vehicle (normal saline groups. One hour after feeding the drugs or vehicle in the volume of 10 ml/kg, 2 ml of castor oil were fed to each animal through an oral-gastric catheter. Then excrements of animals were separately observed in the cages for 4 hours and their quality, frequency and stool weight were determined. Data analysis was performed using one-way ANOVA and Tukey post-test and p<0.05 was considered as significant.Results: Diphenoxylate and 600 mg/kg dose of TP reduced the percentage of the weight loss of animals, their excretion frequency and defecation index (p< 0.001. The 600 mg/kg dose of TP decreased the fecal water content compared to the control group (p< 0.01.Conclusion: Based on our data, essential oil of TP has an effect similar to diphenoxylate on the reduction of osmotic diarrhea symptoms and also reduces the volume of excreted water

  12. Synthesis and characterization of castor oil-based polyurethane for potential application as host in polymer electrolytes

    Indian Academy of Sciences (India)

    S Ibrahim; A Ahmad; N S Mohamed

    2015-09-01

    Polyurethane (PU) based on polyol, derived from castor oil has been synthesized and characterized for potential use as a base material for electrolytes. Transesterification process of castor oil formed a polyol with hydroxyl value of 190 mg KOH g–1 and molecular weight of 2786 g mol–1. The polyols together with 4,4′-diphenylmethane diisocyanate were used to synthesize the desired bio-based PU. The molecular structure of PU was investigated by Fourier transform infrared (FTIR) spectroscopy. The disappearance of NCO peak in the FTIR spectrum at 2270–2250 cm–1 showed that diisocyanate has completely reacted to form PU. Morphological characteristic of the PU film was analysed using scanning electron microscopy, whereas thermal characteristics of the materials were characterized using dynamic mechanical analysis and thermal gravimetric analysis. The cross-sectional micrograph showed that the prepared film was highly amorphous and homogeneous. Thermal studies revealed that the film had low glass transition temperature, –15.8°C, and was thermally stable up to 259°C. These observations indicated the synthesized PU possessed favourable properties to act as a base material in polymer electrolytes.

  13. Synthesis of carboxylate complexes and evaluation of their catalytic activities for polyesterification of castor oil (Ricinum communis with terephthalic acid

    Directory of Open Access Journals (Sweden)

    Eduardo Ulisses Xavier Peres

    2015-07-01

    Full Text Available The use of castor oil (Ricinus communis has been pointed out as an interesting alternative to produce several polymers obtained from step-growth polymerization and are suitable to be used as resins and coatings. The ricinoleate metal complexes Ni[C17H34(OHCOO]2, Sn[C17H34(OHCOO]2, Co[C17H34(OHCOO]2 and Fe[C17H34(OHCOO]2 have been prepared and used as catalyst precursors for polyesterification of castor oil and terephthalic acid (TFA. The observed catalytic activity decreased in the order: Fe[C17H34(OHCOO]2 > Co[C17H34(OHCOO]2 > Sn[C17H34(OHCOO]2 > Ni[C17H34(OHCOO]2. The new polymeric materials did not show homogeneity in their chains, as indicated by their high polydispersity. Indeed, the polydispersity index value varied from 5.49 for the polymer produced in the presence of the nickel complex to 12.42 for these prepared with the cobalt compound. On the other hand, the final material presented high molecular weight, being the lower value (Mw = 13400 Da observed for the polymer prepared with the nickel complex and the highest (Mw = 36400 Da verified for the one obtained with the cobalt compound. It was observed only a glass transition temperature for all the materials, suggesting an amorphous structure of polymeric chains.

  14. Fatty Acid Profile of Cheese from Dairy Goats Fed a Diet Enriched with Castor, Sesame and Faveleira Vegetable Oils

    Directory of Open Access Journals (Sweden)

    Ertha Medeiros

    2014-01-01

    Full Text Available The addition of vegetable oils to the diets of dairy goats is an alternative to supplemental feeding during the dry period and improves the lipid profile of milk and by-products. Cheeses were produced using milk from cross bred goats (Saanen × Alpina fed diets enriched with 4% vegetable oil (faveleira, sesame or castor, the fatty acid profile of cheeses was studied. Supplementation with vegetable oils did not increase the total fat percentage of the cheese (p ≥ 0.05 but did increase the percentage of CLA isomers, long-chain fatty acids (LCFA and polyunsaturated fatty acids (PUFA; in addition, the index of desirable fatty acids (DFA - expressed as the sum of unsaturated fatty acids plus stearic acid was increased for cheese made from milk from goats fed sesame or faveleira oil. Cheeses may have had increased percentages of cis-9,trans-11-CLA due to the supplementation of animal diets with vegetable oils rich in C18:2, such as faveleira and sesame oils. The fatty acid profile of goat cheese did not change significantly in response to the use of castor oil. Thus, the addition of sesame and faveleira oils to goat diets positively altered the fatty acid profile, which improved the nutritional characteristics of the fat present in goat cheese.

  15. Building Supply Systems from Scratch: The Case of the Castor Bean for Biodiesel Chain in Minas Gerais, Brazil

    Directory of Open Access Journals (Sweden)

    Kassia Watanabe

    2012-12-01

    Full Text Available The present study contributes to identifying obstacles to the development of a local biodiesel agro-industrial system (AGS in the state of Minas Gerais, Brazil. The research questions are: “How do local social characteristics influence the organizational effectiveness of agents involved in the joint production effort?”; and “How can the institutional arrangement of biodiesel production be described?” The method adopted is the case study, focused on family farmers served by the Family Farmers Rural Extension and Technical Assistance Company (EMATER. This state organization introduced castor beans (Ricinus communis L. to family farmers as an alternative crop to supply a processing plant (Darcy Ribeiro Biodiesel Plant—DRBP in northern Minas Gerais state, Brazil. These family farmers are not horizontally organized, and sign individual contracts with DRBP. The paper concludes that the primary obstacle to developing the biodiesel AGS with castor beans in Minas Gerais is the lack of horizontal organization among family farmers.

  16. Transport behavior of n-alkane penetrants into castor oil based polyurethane-polyester nonwoven fabric composites

    International Nuclear Information System (INIS)

    Castor oil based polyurethane (PU)-polyester nonwoven fabric composites were fabricated by impregnating the polyester nonwoven fabric in a composition containing castor oil and diisocyanate. Composites were fabricated with two different isocyanates such as toluene-2,4-diisocyanate (TDI) and hexamethylene diisocyanate (HMDI). Transport behavior of n-alkane penetrants (pentane, hexane and heptane) into both PUs and PU-polyester nonwoven fabric composites were studied. Sorption studies were carried out at different temperatures. From the sorption results, the diffusion (D) and permeation (P) coefficients of penetrants have been calculated. Significant increase in the diffusion and permeation coefficients was observed with increase in the temperature of sorption experiments. Drastical reduction in diffusion and permeation coefficients was noticed in the composites compared to neat PUs. Attempts were made to estimate the empirical parameters like n, which suggests the mode of transport and K is a constant depends on the structural characteristics of the composite in addition to its interaction with penetrants. The temperature dependence of the transport coefficients has been used to estimate the activation energy parameter for diffusion (ED) and permeation (EP) processes from Arrhenius plots. Furthermore, the sorption results have been interpreted in terms of the thermodynamic parameters such as enthalpy (ΔH) and entropy (ΔS)

  17. Radiation and water use efficiencies of rainfed castor beans (Ricinus communis L.) in relation to different weather parameters

    International Nuclear Information System (INIS)

    Field experiments on rainfed castor beans (Ricinus communis L.) were conducted for 4 years (1990–1993) to explain the variability in radiation use efficiency (RUE) and water use efficiency (WUE) in relation to meteorological parameters. In these experiments castor c.v. Aruna was sown on three different dates (treatments) in each year. The results from this study indicate that both RUE and WUE vary from year to year and also were influenced by the planting dates. Variations in RUE and WUE ranged from 0.79–1.19 g MJ−1 and 0.72–1.25 g kg−1, respectively. The variability in RUE and WUE before and after flower initiation were quite contrasting. The variability in RUE and WUE was associated with saturation vapour pressure deficit (SVPD), drought index, temperature and wind velocity. RUE was related positively with SVPD and wind velocity and negatively with drought index and temperature. WUE showed inverse relationships with SVPD and temperature and a direct relation with wind velocity. The study emphasises the need for incorporation of the effect of weather on RUE and WUE in the algorithms for biomass estimation of crop simulation models. (author)

  18. Traditional crop for biodiesel. Castor oil could be an alternative, but it is a problematic additive; Traditionspflanze fuer Biodiesel. Rizinusoel koennte eine Alternative sein - problematisch als Beimischung

    Energy Technology Data Exchange (ETDEWEB)

    Ristau, Oliver

    2012-11-01

    As the demand for energy crops like soy is increasing, so are prices. The castor-oil plant may soon become one of these crops. An Israeli-Brazilian cooperation project is to raise the yields of this old culture plant and make it profitable.

  19. Effect of castor bean (Ricinus communis L.) aqueous extracts on the performance of root-knot nematodes (Meloidogyne spp.) on tomato (Solanum lycopersicum L.)

    International Nuclear Information System (INIS)

    The increased concern for environmental and health hazards have called for a reduction in the use of synthetic nematicides for nematode control. Experiments were, therefore, conducted to ascertain the nematicidal potential of castor bean's crude extract and its five lower concentrations with water as control. In the in vitro studies, crude castor bean aqueous extract and 10, 20, 30 and 40% different concentrations with 100 root-knot nematode eggs or juveniles in separate Petri dishes showed that all the different concentrations had toxic effects on eggs and juveniles of root-knot nematode. Egg hatch inhibition and juvenile mortality increased with increased concentration of the extracts. With an increase in exposure time, juvenile mortality increased. In potted plant studies, crude castor bean aqueous extracts and its lower concentrations of 20, 40 and 60% caused significant improvement in plant growth measures such as height and fresh shoot weight over the water blank control. The crude castor bean extract was nematotoxic to root -knot nematodes in vitro and in potted-tomato plants, but this was not demonstrated in field studies. Further work needs to be done before a firm recommendation can be made. (au)

  20. Ratios of Fatty Acids at the sn-2 Position of Triacylglycerols Containing Dihydroxy Fatty Acids in Castor Oil by Mass Sprectrometry

    Science.gov (United States)

    The triacylglycerols (TAG) containing dihydroxy fatty acids have been recently identified by mass spectrometry in castor oil. These new dihydroxy fatty acids were proposed earlier as 11,12-dihydroxy-9-octadecenoic acid (diOH18:1), 11,12-dihydroxy-9,13-octadecadienoic acid (diOH18:2) and 11,12-dihydr...

  1. Regiospecific Indentification of 2-(12-Ricinoleoylricinoleoyl)-1,3-diricinoleoyl-glycerol in Castor Oil by Mass Spectrometry and sn-1,3 Specific Lipase

    Science.gov (United States)

    (12-Ricinoleoylricinoleoyl)diricinoleoylglycerol (RRRR), a tetraacylglycerol, was identified earlier in castor oil. Using ESI-MS4, 95% of the 12-ricinoleoylricinoleoyl chain was identified at the sn-2 position on the glycerol backbone of RRRR. Regiospecific location of the 12-ricinoleoylricinoleoyl ...

  2. Preparation and Characterization of Castor Oil Based Polyester Polyol%蓖麻油基聚酯多元醇的制备及表征

    Institute of Scientific and Technical Information of China (English)

    张猛; 周永红; 潘青良; 曹振华

    2012-01-01

    Castor oil based polyester polyol was prepared by renewable resources castor oil, phthalic anhydride and small molecular alcohol respectively as raw materials via alcoholysis and polyesterification reaction, tetra-n-butyl titanate as catalyst. The influence of the reaction time on the acid value of polyester polyol and different degree of hy-droxy functionality on the hydroxy value and structure of alcoholysis of castor oil were investigated. Further, the quality and thermal stability of alcoholysis of castor oil and castor oil based polyester polyol were charactered by the FT-IR, GPC and TGA. The experimental results showed that, with the degree of hydroxy functionality of small molecular alcohol increasing, the conversion rate and the content of monoglycerol and diglycerol decreased. The alcoholysis of castor oil by glycerol and castor oil based polyester polyol had higher thermal stability than polyether polyol 635.%以可再生资源蓖麻油、苯酐和小分子醇为原料,钛酸正丁酯为催化剂,经酯化、缩聚合成蓖麻油基聚酯多元醇,考察了反应时间对聚酯多元醇酸值的影响以及不同官能度的小分子醇对醇解蓖麻油结构和羟值的影响.采用红外光谱仪(FT-IR)、凝胶色谱(GPC)、热失重仪(TGA)对醇解蓖麻油、蓖麻油基聚酯多元醇的相对分子质量、热稳定性进行了表征.结果表明,随着小分子醇官能度的增加,醇解体系中单酯和二酯含量明显减少,转化率也相应减小;甘油醇解蓖麻油和蓖麻油基聚酯多元醇较普通聚醚多元醇635具有更高的热稳定性.

  3. Optimization of radiation protection by optimizing technology of CASTOR-Cask loading

    International Nuclear Information System (INIS)

    Full text: Germany Optimization of Protection is one of the basic principles of the ICRP System of Radiation Protection. Often this principle is misunderstood and people try to achieve minimal doses irrespective of the amount of manpower or money they have to afford to reach this aim. The better way of optimization is to optimize the technology or the practise which is the cause of radiation exposure and at the same time reduce the dose uptake. Three measures have been used for this purpose in the management of spent fuel in Germany in preparation for the dry storage in CASTOR-Casks. The casks have to be loaded with the spent fuel in the pond of the power plant. After the loading the cask has to be dewatered and dried. The remaining humidity has to be checked with respect to a given maximum residual humidity to avoid corrosion during the long-term storage. Initially a measuring device using the dew point mirror method was used. The mirror was often polluted and needed recalibration. This led to a large variety of measuring times, the time period needed for the above mentioned three steps ranged from 55 to 120 hours. Thus the work could not be reliably planned. To solve this problem we now use a pressure-rise method to measure the humidity within the cask. The time needed is now nearly equal and reliable for all cask loadings and considerably lower than using the dew point method. Thereby the dose uptake of the cask handling staff could be reduced to 2.5 man mSv on average in comparison to the former collective dose of 4 to 5 man mSv. A second step for reducing the dose of the staff is the introduction of remotely controlled valves for the drying process, the humidity measurement and the subsequent filling with Helium. The valves are located at the lid of the cask where a remarkable dose rate could be. The equipment for the remote valve handling has been successfully tested. In the same line is a third measure: to record the process data by computer. The supervising

  4. [Succession caused by beaver (Castor fiber L.) life activity: II. A refined Markov model].

    Science.gov (United States)

    Logofet; Evstigneev, O I; Aleinikov, A A; Morozova, A O

    2015-01-01

    The refined Markov model of cyclic zoogenic successions caused by beaver (Castor fiber L.) life activity represents a discrete chain of the following six states: flooded forest, swamped forest, pond, grassy swamp, shrubby swamp, and wet forest, which correspond to certain stages of succession. Those stages are defined, and a conceptual scheme of probable transitions between them for one time step is constructed from the knowledge of beaver behaviour in small river floodplains of "Bryanskii Les" Reserve. We calibrated the corresponding matrix of transition probabilities according to the optimization principle: minimizing differences between the model outcome and reality; the model generates a distribution of relative areas corresponding to the stages of succession, that has to be compared to those gained from case studies in the Reserve during 2002-2006. The time step is chosen to equal 2 years, and the first-step data in the sum of differences are given various weights, w (between 0 and 1). The value of w = 0.2 is selected due to its optimality and for some additional reasons. By the formulae of finite homogeneous Markov chain theory, we obtained the main results of the calibrated model, namely, a steady-state distribution of stage areas, indexes of cyclicity, and the mean durations (M(j)) of succession stages. The results of calibration give an objective quantitative nature to the expert knowledge of the course of succession and get a proper interpretation. The 2010 data, which are not involved in the calibration procedure, enabled assessing the quality of prediction by the homogeneous model in short-term (from the 2006 situation): the error of model area distribution relative to the distribution observed in 2010 falls into the range of 9-17%, the best prognosis being given by the least optimal matrices (rejected values of w). This indicates a formally heterogeneous nature of succession processes in time. Thus, the refined version of the homogeneous Markov chain

  5. Acute toxicity study of tilmicosin-loaded hydrogenated castor oil-solid lipid nanoparticles

    Directory of Open Access Journals (Sweden)

    Xie Shuyu

    2011-11-01

    Full Text Available Abstract Background Our previous studies demonstrated that tilmicosin-loaded hydrogenated castor oil solid lipid nanoparticles (Til-HCO-SLN are a promising formulation for enhanced pharmacological activity and therapeutic efficacy in veterinary use. The purpose of this work was to evaluate the acute toxicity of Til-HCO-SLN. Methods Two nanoparticle doses were used for the study in ICR mice. The low dose (766 mg/kg.bw with tilmicosin 7.5 times of the clinic dosage and below the median lethal dose (LD50 was subcutaneously administered twice on the first and 7th day. The single high dose (5 g/kg.bw was the practical upper limit in an acute toxicity study and was administered subcutaneously on the first day. Blank HCO-SLN, native tilmicosin, and saline solution were included as controls. After medication, animals were monitored over 14 days, and then necropsied. Signs of toxicity were evaluated via mortality, symptoms of treatment effect, gross and microscopic pathology, and hematologic and biochemical parameters. Results After administration of native tilmicosin, all mice died within 2 h in the high dose group, in the low dose group 3 died after the first and 2 died after the second injections. The surviving mice in the tilmicosin low dose group showed hypoactivity, accelerated breath, gloomy spirit and lethargy. In contrast, all mice in Til-HCO-SLN and blank HCO-SLN groups survived at both low and high doses. The high nanoparticle dose induced transient clinical symptoms of treatment effect such as transient reversible action retardation, anorexy and gloomy spirit, increased spleen and liver coefficients and decreased heart coefficients, microscopic pathological changes of liver, spleen and heart, and minor changes in hematologic and biochemical parameters, but no adverse effects were observed in the nanoparticle low dose group. Conclusions The results revealed that the LD50 of Til-HCO-SLN and blank HCO-SLN exceeded 5 g/kg.bw and thus the

  6. In-vitro regeneration of castor bean (ricinus communis, L) and physic nut (jatropha curcas, L.)

    International Nuclear Information System (INIS)

    Investigations were conducted on in vitro regeneration of physic nut (Jatropha curcas, 1.) and castor bean (Ricinus communis, 1.) using zygotic embryo culture, shoot tip and meristem culture as well as somatic embryogenesis. Zygotic embryos from different stages of fruit maturity cultured on Murashige and Skoog (MS) medium supplemented with benzylaminopurine (BAP), kinetin and 2-isopentyl (2iP) produced vigorous seedlings with roots. However the optimal concentration of cytokinin for seedling development depended on the type cytokinin as well as the maturity stage of the fruit. Embryos from yellow fruits of Jatropha had the highest germination (100%) on an MS medium supplemented with 0.5 mg/L kinetin or 1 mg/L BAP while in Ricinus embryos from black fruits had the highest percentage germination (97%) on an MS medium modified with I mg/L 2iP or 0.5 or I mg/L BAP. Decrease in embryo viability especially in Jatropha as the seed matured may be due to high oil content in matured (black) fruit. Oil content in both Jatropha and Ricinus increased as the fruit matured from green to black and this may have effect on germination of zygotic embryos. In vitro culture response of shoot tip or meristem was significantly influenced by the concentration of growth regulators in the culture medium as well as the plant species. In both plant species, 2iP resulted in highest percentage shoot regeneration. The optimal concentration of 2iP was 0.5 mg/L for Ricinus shoot tip and 1.5 or 2.0 mg/L for Jatropha, indicating genotypic difference between the species. However excessive callus formation and browning in Ricinus led to the loss of all the regenerants. Shoot regeneration from meristem explants was also influenced by growth regulators with 2iP again being the best. Cultures of cotyledon and leaf lobe explants on MS medium supplemented with 2, 4-D and picloram resulted in callus induction with the exception of cotyledons obtained from black fruits. However transfer of calli onto fresh

  7. Opening of the first CO{sub 2} capture installation on the fumes of a coal power plant - european project Castor, Denmark; Inauguration de la premiere installation de captage du CO{sub 2} sur les fumees d'une centrale electrique au charbon - Projet europeen Castor, Danemark

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-03-15

    The 15 March 2006, was launched the first industrial pilot of CO{sub 2} capture of the Castor project, coordinated by the IFP and financed by the european commission, on the site of the Esbjerg (Denmark) power plant. It is the first world installation allowing the CO{sub 2} capture on the fumes of a coal power plant. This document presents the pilot installation, discusses the european project Castor, the advantages of the CO{sub 2} capture and storage for a better use of the fossil energies, where and how capturing the CO{sub 2} and the Denmark energy context. (A.L.B.)

  8. Plantio direto de mamona 'IAC 80' com culturas alimentares No tillage of castor bean 'IAC 80' with food crops

    Directory of Open Access Journals (Sweden)

    Antonio Carlos Pries Devide

    2010-06-01

    Full Text Available Avaliou-se o desempenho da mamona 'IAC 80' cultivada em fileiras duplas, no espaçamento 4,0 x (1,0 x 1,0 m em plantio direto na palha da aveia branca; consorciada com culturas alimentares. O cereal foi utilizado para a produção de grãos (1.375 kg ha-1 e cobertura do solo (1.593 kg ha-1 MS; ciclagem de 35 kg K ha-1. Os consortes foram semeados nas entrelinhas duplas de mamona (Ma: Ma + milho; Ma + feijão; Ma + milho + feijão e Ma + milho + abóbora. Apesar de suscetível ao mofo cinzento, a IAC 80 produziu 1.060 kg ha-1 de grãos; do milho foram colhidas 22.542 espigas verdes ha-1 (5.333 kg ha-1 significando um aporte de 3,15 t ha-1 MS (39 kg N ha-1; 58 kg K ha-1. A abóbora e o feijão não produziram colheitas comerciais. O sistema contendo aveia, mamona e milho, apresentou produtividade satisfatória, contribuindo para a produção de bioenergia com segurança alimentar e conservação ambiental.The objective of this study was to evaluate the performance of castor bean 'IAC 80' grown in double rows spaced at 4.0 x (1.0 x 1.0 m in no-tillage in the white oat straw, intercropped with food crops. The cereal was used for grain production (1375 kg ha-1 and soil coverage (1593 kg ha-1 MS; cycling of 35 kg K ha-1. The associated cultivation was double seeded between the lines of castor beans (Ma: Ma + corn, beans + Ma, Ma + beans and maize corn Ma + pumpkin. The cv. IAC 80, though susceptible to gray mold, produced 1060 kg ha-1 grain; corn ears were harvested with 22.542 ha-1 (5.333 kg ha-1, meaning an input of 3.15 t ha-1 MS (39 kg N ha-1, 58 kg K ha-1. Pumpkin and bean crops did not yield commercial crops. The system containing oats, castor beans, and corn yielded satisfactory and contributed to the production of bioenergy with food security and environmental conservation.

  9. Impacto del castor en la estructura de bosques ribereños de Nothofagus pumilio en Tierra del Fuego, Chile Impact of beavers on Nothofagus pumilio riparian forest structure in Tierra del Fuego, Chile

    OpenAIRE

    Iván Arismendi; Paul Szejner; Antonio Lara; MAURO E GONZÁLEZ

    2008-01-01

    El castor es una especie exótica introducida en Tierra del Fuego en el año 1946. Sus represas construidas en los cursos de agua han modificado las zonas ribereñas existentes antes de su invasión. El presente estudio cuantificó el impacto del castor en la estructura del bosque ribereño de N. pumilio en lugares con y sin castores en dos sectores de la isla. En cada lugar se midieron la densidad, distribución diamétrica y área basal de árboles vivos y muertos. Los árboles muertos por el castor f...

  10. 蓖麻及其衍生制品在食品工业中应用的研究进展%Research progress in application of castor and its derivative products in the food field

    Institute of Scientific and Technical Information of China (English)

    张智勇; 倪娜; 李国瑞; 黄凤兰

    2012-01-01

    Being rich in ricinoleic acid,proteins and some functional factors,castor and its derivatives products are widely used in the food industry.Developments in the study of application of castor products in food industry were reviewed from the utilization of castor oil,castor bean meal,etc.%蓖麻中含有丰富的蓖麻油酸、蛋白质及一些功能成分,因此其衍生制品在食品工业中具有广泛的应用。文章从蓖麻油、蓖麻饼粕蛋白及其他成分的利用等几个方面,对蓖麻产品在食品工业中应用的研究进展情况进行了综述。

  11. Ectopic overexpression of castor bean LEAFY COTYLEDON2 (LEC2) in Arabidopsis triggers the expression of genes that encode regulators of seed maturation and oil body proteins in vegetative tissues ☆

    OpenAIRE

    Hyun Uk Kim; Su-Jin Jung; Kyeong-Ryeol Lee; Eun Ha Kim; Sang-Min Lee; Kyung Hee Roh; Jong-Bum Kim

    2013-01-01

    The LEAFY COTYLEDON2 (LEC2) gene plays critically important regulatory roles during both early and late embryonic development. Here, we report the identification of the LEC2 gene from the castor bean plant (Ricinus communis), and characterize the effects of its overexpression on gene regulation and lipid metabolism in transgenic Arabidopsis plants. LEC2 exists as a single-copy gene in castor bean, is expressed predominantly in embryos, and encodes a protein with a conserved B3 domain, but dif...

  12. Thermal stability and fracture toughness of epoxy resins modified with epoxidized castor oil and Al2O3 nanoparticles

    International Nuclear Information System (INIS)

    This study examined the effects of the epoxidized castor oil (ECO) and Al2O3 content on the thermal stability and fracture toughness of the diglycidylether of bisphenol-A (DGEBA)/ECO/Al2O3 ternary composites using a range of techniques. The thermal stability of the composites was decreased by the addition of ECO and Al2O3 nanoparticles. The fracture toughness of the composites was improved significantly by the addition of ECO and Al2O3 nanoparticles. The composite containing 3 wt % Al2O3 nanoparticles showed the maximum flexural strength. Scanning electron microscopy (SEM) revealed tortuous cracks in the DGEBA/ECO/Al2O3 composites, which prevented deformation and crack propagation

  13. Preparation and properties of aqueous castor oil-based polyurethane-silica nanocomposite dispersions through a sol-gel process.

    Science.gov (United States)

    Xia, Ying; Larock, Richard C

    2011-09-01

    Waterborne castor oil-based polyurethane-silica nanocomposites with the polymer matrix and silica nanoparticles chemically bonded have been successfully prepared through a sol-gel process. The formation of silica nanoparticles in water not only reinforces the resulting coatings, but also increases the crosslink density of the nanocomposites. The (29)Si solid state NMR spectrum indicates the formation of silica and the TEM indicates that the nanoparticles are embedded in the polymers, resembling a core-shell structure. The silica nanoparticles in the polymer matrix play an important role in improving both the mechanical properties and the thermal stabilities of the resulting nanocomposites. This work provides an effective and promising way to prepare biorenewable, high performance nanocomposite coatings. PMID:25867899

  14. WATER CONSUMPTION AND WATER USE EFFICIENCY OF CASTOR BEAN PARAGUAÇÚ CULTIVAR SUBMITTED TO NITROGEN FERTILIZATION

    Directory of Open Access Journals (Sweden)

    Lucia Helena Garófalo Chaves

    2011-04-01

    Full Text Available Although the productivity of castor bean reduces under water deficit it is considered resistant to low precipitation conditions, thus constituting an alternative form of income for the semi-arid. The scarce information about the effect of nitrogen fertilization on water consumption and efficiency of use motivated this study. The study was conducted in a greenhouse located at the Federal University of Campina Grande – Campus I, with plants arranged in a factorial design with three replications and five treatments, totaling fifteen experimental units, which consisted of five nitrogen levels (40, 80, 120, 160 and 200 kg ha-1. Analyzing the phytomass, water consumption and water use efficiency it was observed that the cultivar phytomass increases, water consumption and water use efficiency with the levels of nitrogen, indicating an elevated efficiency on the conversion of water used into dry matter.

  15. Development status of the experimental and numerical load analysis of package units CASTOR registered under drop test conditions

    International Nuclear Information System (INIS)

    The mechanical integrity of package units CASTOR registered for a 9-m drop test under accident conditions has to be demonstrated according the requirements of IAEA among others. For reduction of the loads the containers have to be equipped with shock absorbers on the bottom and top sides. The determination of loads under drop test conditions can be performed with experimental or numerical methods. Due to the complexity of the load state and the verification of results both methods are usually used for integrity demonstration. The numerical codes have to model the short-term dynamic behavior of the whole container for different drop orientations and temperatures, local stress states have to be quantifiable for assessment. One of the problems is the modeling of the material behavior of wood that is used in the shock absorbers. The so far used energetic calculation approach will be replaced by a dynamic approach, the numerical models will have to be verified by experimental drop tests.

  16. Nickel-carbon nanocomposites prepared using castor oil as precursor: A novel catalyst for ethanol steam reforming

    Science.gov (United States)

    Carreño, Neftalí L. V.; Garcia, Irene T. S.; Raubach, Cristiane W.; Krolow, Mateus; Santos, Cláudia C. G.; Probst, Luiz F. D.; Fajardo, Humberto V.

    A novel and simple method to prepare nickel-based catalysts for ethanol steam reforming is proposed. The present method was developed using castor oil as a precursor. The results clarify that the nickel-carbon (Ni/C) catalyst has a high activity for ethanol steam reforming. It was observed that the catalytic behavior could be modified according to the experimental conditions employed. Moreover, it is interesting to note that the increase in the catalytic activity of the Ni/C nanocomposite over time, at 500 and 600 °C of reaction temperature, may be associated with the formation of filamentous carbon. The preliminary results indicate that the novel methodology used, led to the obtainment of materials with important properties that can be extended to applications in different catalytic process.

  17. Production of multifunctional lipases by Penicillium verrucosum and Penicillium brevicompactum under solid state fermentation of babassu cake and castor meal.

    Science.gov (United States)

    Silva, Marceli Fernandes; Freire, Denise M G; de Castro, Aline Machado; Di Luccio, Marco; Mazutti, Marcio A; Oliveira, J Vladimir; Treichel, Helen; Oliveira, Débora

    2011-02-01

    The main objective of this work was to optimize lipase production, in terms of hydrolytic and esterification activities, by Penicillium brevicompactum and Penicillium verrucosum in solid state fermentation using agroindustrial residues as raw material. Maxima hydrolytic activities of 48.6 and 87.7 U/g were achieved when P. brevicompactum was cultured in babassu cake and castor meal, respectively. Higher esterification activities (around 244 U/g) were achieved when P. brevicompactum was used as microorganism and babassu cake as raw material. Different experimental conditions led to these promising values, clearly showing that no correlation can be attributed between hydrolytic and esterification activities. In spite of the several applications of lipases which are capable of catalyze synthesis reactions, only few works in this subject are presented in the literature, especially when low cost raw materials are used. PMID:20652598

  18. Productive performance and efficiency of utilization of the diet components in dairy cows fed castor meal treated with calcium oxide

    Directory of Open Access Journals (Sweden)

    Juliana Variz Cobianchi

    2012-10-01

    Full Text Available The effect of replacing of 0; 0.33; 0.67 and 1.0 (kg/kg of soybean meal (SBM by undecorticated castor seed meal treated with calcium oxide (CMT - 60 g/kg was evaluated on performance and efficiency of nutrient utilization in dairy cows. Sixteen Holstein and crossbred cows were distributed in four 4 × 4 latin squares. Animals received concentrated feed at a ratio of 1 kg for 3 kg of milk produced, in the natural matter. The diets had the same amount of nitrogen (150.4 g crude protein/kg DM, containing 325.6 g of concentrated feed/kg DM. There was no effect on the serum concentration of transaminase and the animals showed no clinical symptoms of intoxication by ricin. The intake of DM, crude protein (CP and non-fibrous carbohydrates (NFC reduced from 0.67 replacement of SBM by CMT. The intake of neutral detergent fibers corrected for ash and protein (NDFap increased from 0.33 replacement of SBM with CMT. Although the digestibility of dietary components decreased from 0.33 replacement, the intake of digestible components only reduced from 0.67 replacement. Because of the reduction of digestible energy, the synthesis of microbial CP and the utilization efficiency of rumen-degradable protein for the synthesis of microbial CP reduced with full replacement of SBM by CMT. Milk yield, milk composition, daily variation of body weight and the efficiency of utilization of the nutrients for the synthesis of N in milk reduced from 0.67 replacement of SBM by CMT. Castor seed meal treated with calcium oxide can replace up to 0.33 of SBM (50 g/kg DM diet DM in the diet of dairy cows with an average milk production of 20 kg/day.

  19. Propolis or cashew and castor oils effects on composition of Longissimus muscle of crossbred bulls finished in feedlot

    Directory of Open Access Journals (Sweden)

    Maribel Velandia Valero

    2014-12-01

    Full Text Available The natural additive products (propolis or essential oils, in replacing antibiotics, could be used as an alternative for feed strategies to improve animal production. This work was performed to evaluate the effect of natural additives as propolis or essential oils on meat quality of crossbred (Aberdeen Angus vs. Nellore bulls. Thirty bulls were kept in feedlot (individual pen for 55 d and randomly assigned to one of three diets (n = 10: control (CON, propolis (PRO, or essential oils (OIL. CON diet consists of corn silage (45% DM and concentrate (cracked corn, soybean meal, glycerin, limestone, and mineral salt, 55% DM. The PRO group received same CON diet plus 3 g animal-1 d-1 of propolis premix added to the concentrate. The OIL group received same CON diet and 3 g animal-1 d-1 of a premix (cashew Anacardium occidentale L. and castor Ricinus communis L. oils added to the concentrate. Fat thickness (5.0 mm, pH (5.9, Longissimus muscle area 58.0 cm², marbling, texture, color (L* = 36.6, a* = 17.3, and b* = 5.9, lipid oxidation (0.08 malonaldehyde kg-1 meat, and Warner-Bratzler shear force (3.3 kg were unaffected by the diet. PRO and OIL diets had no effect neither on moisture (73.7%, ashes (1.1%, protein (23.8%, and lipids (1.7%, fatty acid composition or polyunsaturated/saturated fatty acid (PUFA/ SFA, 0.13, and n-6/n-3 ratio (6.9 on Longissimus muscle. Addition of natural additives as propolis extract or cashew and castor oils in the diet of bulls when they are finished in a feedlot did not change meat qualities.

  20. Performance of single-cylinder compression ignition engine with indigenous castor oil bio diesel / Tek Silindirli Sıkıştırma Ateşlemeli Motorun Yöresel Hintyağı Otu Biyodizeli ile Performansı

    OpenAIRE

    Vashist, Devendra; Ahmad, Mukhtar

    2014-01-01

    Neat castor oil poses problems when used in CI engine. Problems are reduced to minimum by subjecting the castor oil to transesterification. Castor oil was converted to bio diesel and blended by 5%, 10%, 15% and 20% in quantity (by volume) with high-speed mineral diesel (HSD) fuel. This fuel was used on a single-cylinder compression-ignition, four-stroke diesel engine. The blended fuel gave lower emissions of CO but resulted in higher values of CO2...

  1. 蓖麻种质资源创新及育种方向研究%Germplasm Resource Innovation and Breeding Direction of Castor

    Institute of Scientific and Technical Information of China (English)

    张宝贤; 王光明; 刘红光; 谭德云; 刘婷婷; 孙慧博

    2013-01-01

    Castor is dicotyledonous annual or perennial herb,which is originally produced in eastern Affica,and successively introduced to Asia,America and Europe.Because of wide adaptability and high survival rate,it is widely grown in various countries,being one of the world's ten most important oil crops.Castor has very wide application range,which is recognized as the most promising plant oil in deep processing instead of oil.It has very high development and utilization value,and has been paid attention by a large number of researches.However,the current international castor seed breach is serious,so the development and utilization of castor industry is restricted.Castro breeding research in China began in early 1950s.Currently,castor breeding technology and variety yield level in China have reached international advanced level.Although great improvement has been made,there still have space in many ways.Based on long-term castor breeding practice,the paper discusses the feasibility and importance of using wild resources,native variety and imported varieties to improve and innovate germplasm resources of castor,and breed disease-resistant inbred lines and hybrids.According to regional characteristics of castor cultivation in China,the main breeding objectives including high yield and high oil,suitable for mechanized cultivation,high resistance and strong stress tolerance are put forward in the paper.%蓖麻为双子叶一年生或多年生草本植物,原产于非洲东部,先后传入亚洲、美洲和欧洲.因其适应性广、存活率高,故广泛存在于各国家,是世界十大重要油料作物之一.蓖麻油应用范围十分广泛,在替代石油的深加工方面是公认的最有前景的植物油,其综合开发利用的经济价值极高,已被众多研究者所瞩目.但是,目前国际上蓖麻籽缺口严重,使得蓖麻产业的开发利用受到较大限制.我国蓖麻育种研究工作始于上世纪50年代初,目前,我国蓖麻育种技术及品

  2. Radiological and thermal characteristics of CASTOR RBMK-1500 and CONSTOR RBMK-1500 casks for spent nuclear fuel storage at Ignalina nuclear power plant

    International Nuclear Information System (INIS)

    The main characteristics, such as temperatures of the fuel rod cladding and cask surface, dose rates at the surface and at the some distance for CASTOR RBMK-1500 and CONSTOR RBMK-1500 casks loaded with spent nuclear fuel are presented. These casks are used for an interim dry storage of spent nuclear fuel at Ignalina Nuclear Power Plant. Numerical modeling (calculation of the equivalent dose rates, activities of nuclides, etc.) and experimental measurements of the equivalent dose and gamma spectrum on the cask surface at the dry storage facility were performed for assessment of radiation characteristics. Temperatures were evaluated using only numerical modeling. Rather good agreement between experimentally determined and calculated dose rates for CASTOR RBMK-1500 and CONSTOR RBMK-1500 casks was obtained. Also it was revealed that maximum fuel rod cladding temperature is higher for CONSTOR RBMK-1500 cask, but never exceeds the maximum allowable value. The cask surface temperatures are similar for both cask types. (orig.)

  3. 蓖麻油基下游产物及蓖麻油增塑剂的研究及其应用进展%Research and application progress of castor oil-based downstream products and its plasticizer

    Institute of Scientific and Technical Information of China (English)

    许伟; 葛小东; 金丽珠; 邵荣

    2015-01-01

    随着全球化石资源消耗量的不断剧增,能源危机问题引起了广泛的关注。在植物资源能源化的利用中,以蓖麻油为原料开发高附加值下游产品已成为研究热点。本文介绍了国内外蓖麻油基下游产品的制备方法、产品性能及应用领域等方面。回顾了脱水蓖麻油、酯交换蓖麻油、环氧化蓖麻油、蓖麻油基聚氨酯等下游产物的制备与应用性能研究。简述了蓖麻油基增塑剂的种类及应用领域,具体分析了环氧乙酰蓖麻油酸甲酯的制备方法及产品特性。提出了在我国蓖麻油基增塑剂的生产过程中反应温度、催化剂用量等因素影响环氧基团稳定性的问题,指出目前我国催化合成蓖麻油基增塑剂的趋势和发展方向。%With the rapid consumption of fossil resources,the global energy crisis has caused serious concern. In the utilization of plant resources,the exploitation of downstream products,during which castor oil used as raw materials,has become to be a hot research area. The preparation methods, performance as well as the application fields of castor oil-based downstream products were introduced in this work. The preparation and properties of some castor oil-based downstream products,such as dehydrated castor oil,transesterification of castor oil,exploitation of castor oil,polyurethane of castor oil and so on,were reviewed. The types and application areas of castor oil-based plasticizers were sketched and the preparation methods and the properties of epoxidized methyl acetorieinoleate were analyzed. The problems of the effects of the reaction temperature and the dosage of catalyst on the stability of epoxy group in the production process of the castor oil-based plasticizer were discussed,and the developing trends in the field of castor oil-based plasticizers were proposed.

  4. 无溶剂法合成环氧蓖麻油的工艺研究%Technical Study on Non-solvent Synthesis of Epoxidized Castor Oil

    Institute of Scientific and Technical Information of China (English)

    赵栋; 卢倩倩; 李驰宇; 史以俊; 何明; 罗振扬

    2011-01-01

    以可再生的蓖麻油为主要原料,H3P04作为催化剂,30% H2O2作为氧源,在无溶剂条件下合成环氧蓖麻油.通过正交实验的方法对蓖麻油环氧化反应进行了研究和探讨,得出最佳反应条件为:n(H202):n(蓖麻油双键)=1.4:1,n(甲酸):n(蓖麻油双键)=0.5:1,催化剂H3POa质量分数为蓖麻油的0.3%,反应时间6h,所得产物环氧值为3.23%,并采用红外光谱、碘值分析和薄.层色谱对环氧化产品进行了分析表征.%Using renewable castor oil as the main raw material, H3PO4 as catalyst and H2O2 (30%, mass fraction) as oxidation agent, epoxidized castor oil was prepared without solvent.The synthesis conditions were studied using orthogonal experiment.The optimized reaction conditions were as follows: n( H2O2): n( double bonds of castor oil) = 1.4: 1, n ( formic acid): n ( double bonds of castor oil) = 0.5: 1, the amount of catalyst H3PO4 was 0.3% and reaction time was 6 h.Under these optimized conditons, the epoxy value of the final product was 3.23%.FT-IR, iodine value analysis and TLC were employed to characterize the product.

  5. Growth, carcass characteristics, chemical composition and fatty acid profile of the longissimus dorsi muscle in goat kids fed diets with castor oil

    OpenAIRE

    Michelle de Oliveira Maia; Ivanete Susin; Alexandre Vaz Pires; Renato Shinkai Gentil; Evandro Maia Ferreira; Clayton Quirino Mendes; Severino Matias de Alencar

    2012-01-01

    The objective in this study was to determine growth, carcass characteristics, chemical composition and fatty acid profile of the longissimus dorsi of crossbred Boer × Saanen kids fed castor oil. Twenty-four kids (12 males and 12 females) were assigned in a randomized complete block design with two treatments and twelve replications. Blocks were defined according to weight, gender and initial age of animals for the evaluation of performance. The experimental treatments consisted of two diets c...

  6. Comparison Between Polyurethanes Containing Castor Oil (Soft Segment) and Cancellous Bone Autograft in the Treatment of Segmental Bone Defect Induced in Rabbits

    OpenAIRE

    Marques Pereira-Júnior, Oduvaldo Câmara; Rahal, Sheila Canevese; Iamaguti, Paulo; Felisbino, Sérgio Luis; Pavan, Priscila Teodoro; Vulcano, Luiz Carlos

    2007-01-01

    Abstract The aim of this study is to compare polyurethanes containing castor oil (soft segment) in granular form compared to cancellous bone autograft applied to a segmental bone defect. Norfolk adult female rabbits ? approximately 13 months of age with a mean body weight of 4.5 kg ? are used. In both radial diaphyses, 1 cm osteoperiosteal segmental defects are created. The defect in the ...

  7. Evaluation of dentin cleansing by a detergent derived from castor oil (Ricinus communis) used as root canal irrigant: a scanning electron miscroscopy study

    OpenAIRE

    Letícia Molteni Aguiar; Lilian Eiko Maekawa; Adriana Chung; Maria Renata Giazzi Nassri

    2010-01-01

    Introduction and objective: To evaluate, by scanning electron microscopy (SEM), the cleaning of root canal walls after biomechanical preparation and irrigation with castor oil (Endoquil®) and 0.5% sodium hypochlorite (NaOCl). Material and methods: Fifteen maxillary incisors were subjected to standardized root canal instrumentation with different irrigants (n = 5): G1 – Endoquil; G2 – 0.5% NaOCl; G3 – saline solution (control). After instrumentation, the teeth were prepared for SEM analysis (...

  8. High light exposure on seed coat increases lipid accumulation in seeds of castor bean (Ricinus communis L.), a nongreen oilseed crop.

    Science.gov (United States)

    Zhang, Yang; Mulpuri, Sujatha; Liu, Aizhong

    2016-05-01

    Little was known on how sunlight affects the seed metabolism in nongreen seeds. Castor bean (Ricinus communis L.) is a typical nongreen oilseed crop and its seed oil is an important feedstock in industry. In this study, photosynthetic activity of seed coat tissues of castor bean in natural conditions was evaluated in comparison to shaded conditions. Our results indicate that exposure to high light enhances photosynthetic activity in seed coats and consequently increases oil accumulation. Consistent results were also reached using cultured seeds. High-throughput RNA-Seq analyses further revealed that genes involved in photosynthesis and carbon conversion in both the Calvin-Benson cycle and malate transport were differentially expressed between seeds cultured under light and dark conditions, implying several venues potentially contributing to light-enhanced lipid accumulation such as increased reducing power and CO2 refixation which underlie the overall lipid biosynthesis. This study demonstrated the effects of light exposure on oil accumulation in nongreen oilseeds and greatly expands our understanding of the physiological roles that light may play during seed development in nongreen oilseeds. Essentially, our studies suggest that potential exists to enhance castor oil yield through increasing exposure of the inflorescences to sunlight either by genetically changing the plant architecture (smart canopy) or its growing environment. PMID:26589321

  9. The so-called 'Castor-Crisis': Transport of spent nuclear fuel elements and German 'Angst'. How to prevent the public relations catastrophe

    International Nuclear Information System (INIS)

    Full text: 1. 'Castor-Crisis' - The Real Facts. - the background: radioactive contamination on the surface of transport containers for spent nuclear fuel elements; - legal aspects: transport limit values and notification obligations; - health aspects: radioactive contamination and ionising radiation; - the news media: divergence between technical facts and public perception. 2. 'Castor-Crisis' - The Reactions. 2.1 Technical measures: - 'action plan' of the Federal Ministry for Environment Protection and Reactor Safety; - IT-based European Information and Report System for the transport of nuclear combustibles => 'Transparent Transport Procedures'; - optimisation of decontamination procedures and transport organisation; - simplification of logistics, clearer responsibilities. 2.2 Communications measures: - defense strategy: 'we made a mistake...'; - information campaign: 'we owe you some answers...'; - regaining credibility: public testimonials of employees in newspaper ads, brochures etc.; - regaining credibility: neutral investigation of all relevant circumstances by KPMG. 3. 'Castor-Crisis' - The Lessons: - internal crisis management: improved co-ordination at company and branch level; - pro-active strategy: 'The benefits of nuclear energy' (avoidance Of CO2-emissions); - limits of communications; - communications efforts for nuclear energy - the European context. (author)

  10. CASTOR registered 1000/19. Shipping and storage cask for dry intermediate storage of spent fuel elements from the Temelin nuclear power station

    International Nuclear Information System (INIS)

    The CASTOR registered 1000/19-type cask newly developed by GNS Gesellschaft fuer Nuklear-Service mbH has been designed for shipment and dry storage of 19 spent fuel elements from the two VVER-1000 pressurized water reactors of the Temelin nuclear power station. The design and expert approval followed the internationally recognized shipping regulations of IAEA and the Czech rules and regulations for dry intermediate storage. One June 21, 2010, the Czech regulatory authority issued a type approval (integral transport and storage permit) valid for a period of 5 years for the casks of the new CASTOR registered 1000/19 line. As early as on September 9, 2010, which is less than 4 years after the delivery contract had been signed by CEZ and GNS in November 2006, the first cask of the CASTOR registered 1000/19 line was loaded with 19 spent fuel elements in only 5 days and emplaced in the newly built intermediate cask store. Loading, handling, in-plant transport, and emplacement of the cask made successful use of the extensive handling and management equipment furnished by GNS. After successful commissioning of the equipment and cold handling in both power plant units and in the intermediate cask store, successful loading and emplacement represents one of the most important milestones in the project. (orig.)

  11. Effect of temperature and composition on density, viscosity and thermal conductivity of fatty acid methyl esters from soybean, castor and Jatropha curcas oils

    International Nuclear Information System (INIS)

    Highlights: ► Thermophysical properties of soybean, castor and Jatropha curcas oils and related systems. ► Effect of temperature and composition on density, viscosity and thermal conductivity of the systems studied. ► Density, dynamic viscosity and thermal conductivity data were correlated using empirical equations. -- Abstract: This work is focused on experimental determination of density, viscosity and thermal conductivity as a function of temperature and composition for fatty acid methyl esters (FAME) from soybean, castor and Jatropha curcas oils. Results show that an increase in temperature, over the range of (273 to 363) K, resulted in a decrease of all properties studied. FAME from soybean and J. curcas oils presented similar rheological behaviour, while FAME from castor oil presented higher values for density and viscosity. Density, dynamic viscosity and thermal conductivity data for all systems obtained here were correlated using empirical equations with good agreement between experimental and calculated values. Experimental data presented here may be useful as a database for specification purposes and equipment design and plant operation in the biodiesel industry

  12. Castor Seed from Melkasa Agricultural Research Centre, East Showa, Ethiopia and it’s biodiesel performance in Four Stroke Diesel Engine

    Directory of Open Access Journals (Sweden)

    Tesfahun Tegegne Akanawa

    2014-05-01

    Full Text Available This study focused in investigating the fuel properties of Castor oil Methyl Ester (CME and its blend with diesel fuel in running a diesel engine. Engine tests have been carried out with the aim of obtaining comparative measures of torque, power, and specific fuel consumption. Castor oil was extracted by using a mechanical pressing machine and trans-esterification was made by methyl alcohol and potassium hydroxide as a catalyst.  So that its viscosity and density were reduced and by increasing its volatility.  By following the procedures given in American Society for Testing and Materials (ASTM book the fuel characteristics were identified whether it fulfil the requirements needed to be used as a fuel in internal combustion engines or not. From the characterization result, it was proved that trans-esterified castor oil was found to be a promising alternative fuel for compression ignition (diesel engines. But the viscosity of CME was still higher and the energy content was a little bit less as compared to petro diesel. To solve these problems CME was blended with petro diesel in some proportion (B5, B10, B20, B40, B80. The torque, power and brake specific fuel consumption performances of CME and its blends with petro diesel were tested in a four stroke diesel engine. The analyzed results were compared with that of petro diesel and found to be very nearly similar, making CME a suiTable alternative fuel for petro diesel.

  13. Study on Screening of Castor Herbicide in Tongliao Area%通辽地区蓖麻田除草剂筛选研究

    Institute of Scientific and Technical Information of China (English)

    乔文杰; 朱国立; 贾娟霞; 何智彪; 张智勇; 莫德乐吐; 敖立芹

    2015-01-01

    在蓖麻播后苗前和幼苗期进行化学除草剂筛选试验,结果表明:播后苗前除草剂以浓度为10 mL/L的50%乙草胺乳油防效最佳,对蓖麻安全;苗期除草剂以浓度为6 mL/L的20.8%烯禾氟磺胺乳油对杂草有较好的防治效果。10%乙氧氟草醚对蓖麻叶片产生轻度药害,后期可恢复。%Chemical herbicides screening test in castor after sowing and before seedling was carried out.The results showed that control effect at the concentration of 50%acetochlor EC 10 mL/L after sowing before herbicide was the best and safety to castor.Herbicide at the concentration of 20.8%sethoxydim-fomesafen EC 6 mL/L in seedling stage had good control effect on weeds.10%oxyfluorfen had mild injury on castor leaves,and could return to normal in later stage.

  14. Absolute dimensions of the M-type eclipsing binary YY Geminorum (Castor C) a challenge to evolutionary models in the lower main-sequence

    CERN Document Server

    Torres, G; Torres, Guillermo; Ribas, Ignasi

    2001-01-01

    We present new spectroscopic observations of the detached late-type double-lined eclipsing binary YY Gem, a member of the Castor sextuple system and one of the benchmarks for the comparison between observations and stellar evolution theory in the lower main-sequence. In addition, we have re-analyzed existing light curves in several passbands using modern techniques that account for the conspicuous presence of spots. This, combined with the spectroscopy, has yielded a very precise determination of the absolute dimensions of the components, which are virtually identical to each other. We obtain mean values of M=0.5992+/-0.0047 Mo, R=0.6191+/-0.0057 Ro, and Teff=3820+/-100 K. Both the mass and the radius determinations are good to better than 1%. A re-analysis of the Hipparcos transit data for Castor AB has yielded an improved parallax for the system of 66.90+/-0.63 mas. With this, we have estimated the age (~370 Myr) and metal abundance ([Fe/H]~0.0) of YY Gem from isochrone fits to Castor A and B. We have compa...

  15. Síntesis y caracterización de adhesivos reposicionables de poliuretano dispersos en agua, obtenidos a partir de aceite de castor maleinizado Synthesis and characterization of pressure-sensitive adhesives of waterborne polyurethane from maleinizated castor oil

    Directory of Open Access Journals (Sweden)

    Paula Mazo

    2010-06-01

    Full Text Available El presente trabajo se centró en la producción de dispersiones acuosas de poliuretano empleando el método de emulsificación por inversión de fases. Para la síntesis fueron empleados dos polioles: uno comercial tipo poliéster y el otro es aceite de castor maleinizado (MACO; dos diisocianatos, uno aromático Toluen diisocianato (TDI y otro alifático Hexametilen diisocianato (HDI, siendo poco comunes para esta aplicación. Como emulsificante interno se empleó ácido cítrico el cual es muy económico y de fácil adquisición. Como factores se evaluaron la cantidad de ácido cítrico y la relación molar de grupos isocianato a hidroxilos (NCO/OH, generando un diseño de experimentos factorial 3² y minimizando el contenido de sólidos sedimentados. Mediante la metodología de superficie de respuesta, se obtuvo una ecuación polinomial cuadrática por un análisis de regresión múltiple. Los poliuretanos formados fueron evaluados en cuanto a sus propiedades adhesivas y mecánicas (pegajosidad tack, pegajosidad en cinta loop tack, cohesión hold, pelado peel, lo que permitió clasificar el adhesivo como reposicionable, para emplearlo en etiquetas.This work focused on the production of aqueous dispersions of polyurethane using the emulsification method by phase inversion. For the synthesis two polyols were employed, viz. a commercial polyester and Maleinizated Castor Oil (MACO, with two diisocyanates: one aromatic, toluene diisocyanate (TDI and another aliphatic, hexamethylene diisocyanate (HDI, which are not common for this application. Citric acid was used as internal emulsifier which is inexpensive and readily available. The parameters were the amount of citric acid and the mole ratio of isocyanate groups to hydroxyl (NCO/OH, generating a 3² factorial design, with minimization of the sedimented solids. The surface methodology was used to obtain a quadratic polynomial equation by multiple regression analysis. Polyurethanes synthesized were

  16. Synthesis Process of Castor Oil Glycidyl Ether%蓖麻油缩水甘油醚合成工艺研究

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    Using castor oil and epoxy chloropropane( ECH) as the main raw materials under the alkali condition, a novel castor oil glycidyl ether ( COGE) was synthesized through two steps, namely open loop and closed loop reaction. The effects of process conditions on epoxy values were investigated. The results showed that the highest epoxy value the product achieved was 1. 56 mmol/g under the condition that the open loop reaction was set at 0. 4% catalyst dosage,3. 5 molar ratio of ECH and castor oil, and reaction temperature at 60 ℃ for 5 h, and as well as the close-loop reaction was set 0. 4% catalyst dosage, 1. 1 molar ratio of NaOH and ECH, and reaction temperature at 60 ℃ for 6 h. The chemical structure of the castor oil glycidyl ether was characterized by FT-IR and 1H NMR. TGA analysis showed that castor oil glycidyl ether had good thermal stability at high temperature. Viscosity test showed that the product could reduce the viscosity of epoxy resin.%以蓖麻油、环氧氯丙烷( ECH)和液碱为主要原料,经二步法开环闭环反应合成了蓖麻油缩水甘油醚( COGE),研究了开环、闭环工艺条件对产物环氧值的影响。结果表明,开环催化剂三氟化硼-二乙基醚用量0.4%,ECH与蓖麻油的物质的量比3.5∶1,反应温度60℃,反应时间5 h;闭环催化剂四甲基氯化铵用量0.4%,反应时间6 h,反应温度60℃,NaOH与ECH物质的量比1.1∶1时产物环氧值最高为1.56 mmol/g。采用红外光谱(FT-IR)、核磁共振氢谱(1H NMR)表征了合成产物的化学结构,热失重(TG)分析表明蓖麻油缩水甘油醚具有优良的高温热稳定性,黏度测试表明该产物可以降低环氧树脂的黏度,加入量15%时,黏度降低46%。

  17. Use of gamma rays for development of leaf hopper resistant pistillate lines in castor (Ricinus communis L.)

    International Nuclear Information System (INIS)

    A non revertant stable pistillate line -DPC 9 of castor was developed at Directorate of Oilseeds Research, Hyderabad. It is resistant to a major biotic stress like soil borne Fusarium wilt but susceptible to the incidence of leaf hopper - Empoasca flavescenes (Fabr). Resistance to leaf hopper is linked to presence of waxy coating called bloom on plant parts which is a highly heritable character and controlled by dominant, single to oligogenes. Castor is a sexually polymorphic species and pistillate character in S type is controlled by dominant and epistatic factors. Mutation breeding is resorted to strike a balance between a complex character like non revertant pistillate expression and a simply inherited character like presence of bloom. Seeds of DPC 9 were treated with different doses of gamma rays starting from 400, 450, 500, 550 and 600 Gy rays in 2001. Observations recorded on germination (%), hypocotyl length and root length in 50 seedlings of 15 day age, grown under pot culture conditions indicated that 600Gy gamma rays resulted in 25-30% reduction in these parameters. Three hundred M1 plants of 550Gy gamma ray treated lot were raised in Rabi season, 2002-03 at a spacing of 90 x 45 cm and continued up to 6th to 7th order of spike for selection of stable pistillate expression and selfed. Plant to row progenies were continued in M2 and selection for pistillate expression continued up to M5 in Rabi season every year. Break down of resistance to Fusarium wilt was observed in M3 and majority of the plant progenies succumbed to wilt under filed conditions of the inoculum. In M5, DPC 9 plants with the presence of bloom on all parts (triple bloom), stem and lower side of the leaf (double bloom) were observed and advanced to M6. In M6, DPC 9 pistillate plants with triple bloom and high intensity of bloom on older leaves were identified. The pistillate line is under stabilization for its presence of bloom and stable pistillate character. Selection criteria in the

  18. 混合催化剂催化蓖麻油合成蓖麻油多元醇%Preparation of Castor Oil Polyol by Mixed Catalyst

    Institute of Scientific and Technical Information of China (English)

    张立强; 张猛; 周永红; 胡丽红; 杨晓慧

    2013-01-01

    The castor oil polyols were prepared by using renewable castor oil as the main raw material,using sodium methoxide and triethanolamine as mixed catalyst,through transesterification reaction with cheap glycerol in nitrogen atmosphere.The effects of catalyst dosage,mass ratio,reaction temperature and reaction time on the conversion rate of castor oil monoglycerides,castor oil Kennedy diester and all product were investigated,respectively.The chemical structures,molecular mass and yield of the products were characterized by means of FT-IR,GPC.The optimum process was optimized by single variable experiment.The highest yield(92.54%) of castor oil polyol was obtained when mixed catalyst dosage was 0.75% of the castor oil mass,reaction temperature was 180 ℃,the mass ratio of castor oil and glycerol was 50 ∶ 12.33 and reaction time was 2.5 hours.Compared with sodium methoxide and tetrabutyl titanate as catalyst,not only the convention rate but also the hydroxyl value of the product was improved using the mixed catalyst,and the color of the product was reduced.%以可再生的蓖麻油为主要原料,首次采用甲醇钠和三乙醇胺为混合催化剂,与甘油在N2环境中发生酯交换反应,生成蓖麻油单甘脂和蓖麻油甘二酯.考察了催化剂用量、甘油用量、反应温度、反应时间对蓖麻油单甘脂转化率、蓖麻油甘二酯转化率和总转化率的影响,并与传统的催化剂甲醇钠、钛酸四丁酯催化酯交换反应进行了比较.采用FT-IR、GPC对产物的结构、相对分子质量和转化率进行了表征.通过单一变量控制法对反应的条件进行优化.结果表明,催化剂用量为蓖麻油质量的0.75%、蓖麻油和甘油的质量比为50∶12.33、反应温度为180℃、反应时间为2.5h时,蓖麻油多元醇的转化率最高,可达92.54%,与传统催化剂相比较,混合催化剂不仅提高了产物的转化率和羟值,而且使产品的色泽降低.

  19. Toxicity of water-soluble fractions of biodiesel fuels derived from castor oil, palm oil, and waste cooking oil.

    Science.gov (United States)

    Leite, Maria Bernadete Neiva Lemos; de Araújo, Milena Maria Sampaio; Nascimento, Iracema Andrade; da Cruz, Andrea Cristina Santos; Pereira, Solange Andrade; do Nascimento, Núbia Costa

    2011-04-01

    Concerns over the sustained availability of fossil fuels and their impact on global warming and pollution have led to the search for fuels from renewable sources to address worldwide rising energy demands. Biodiesel is emerging as one of the possible solutions for the transport sector. It shows comparable engine performance to that of conventional diesel fuel, while reducing greenhouse gas emissions. However, the toxicity of products and effluents from the biodiesel industry has not yet been sufficiently investigated. Brazil has a very high potential as a biodiesel producer, in view of its climatic conditions and vast areas for cropland, with consequent environmental risks because of possible accidental biodiesel spillages into water bodies and runoff to coastal areas. This research determined the toxicity to two marine organisms of the water-soluble fractions (WSF) of three different biodiesel fuels obtained by methanol transesterification of castor oil (CO), palm oil (PO), and waste cooking oil (WCO). Microalgae and sea urchins were used as the test organisms, respectively, for culture-growth-inhibition and early-life-stage-toxicity tests. The toxicity levels of the analyzed biodiesel WSF showed the highest toxicity for the CO, followed by WCO and the PO. Methanol was the most prominent contaminant; concentrations increased over time in WSF samples stored up to 120 d. PMID:21184529

  20. Performance and Emission Characteristics of a Compression Ignition Engine Operating on Blends of Castor Oil Biodiesel-Diesel

    Science.gov (United States)

    Kanwar, Roopesh; Sharma, Pushpendra Kumar; Singh, Aditya Narayan; Agrawal, Yadvendra Kumar

    2016-06-01

    Diesel vehicles are the nerves and veins of transportation, particularly in developing countries. With the rapid rate of modernization, increasing demand of fuel is inevitable. The exponential increase in fuel prices and the scarcity of its supply from the environment have promoted interest in the development of alternative sources of fuel. In this work, genus Ricinus communis L. was studied in order to delimit their potential as a raw material for biodiesel production. Further, castor oil, ethyl ester were prepared by transesterification using potassium hydroxide (KOH) as a catalyst and tested on a four-stroke, single-cylinder compression ignition engine. The test was carried out at a constant speed of 3000 rpm at different loads. The results represent a substantial decrease in carbon monoxide (CO) emission with an increasing biodiesel percentage. The reduction of CO in B05, B10, B15 and B20 averaged 11.75, 22.02, 24.23 and 28.79 %, respectively, compared to mineral diesel. The emission results of the comparative test indicated that CO, oxygen (O2) and smoke density emissions are found to be lower when the engine is filled with B05, B10, B15 and B20 as compared to mineral diesel, while carbon dioxide (CO2) and nitrogen oxide (NOx) with B05, B10, B15 and B20 are found to increase marginally. Brake thermal efficiency and brake specific fuel consumption decrease and increase respectively in biodiesel with different blends in comparison of mineral diesel.

  1. Synthesis and characterization of gold nanotube/nanowire–polyurethane composite based on castor oil and polyethylene glycol

    Energy Technology Data Exchange (ETDEWEB)

    Ganji, Yasaman, E-mail: y.ganji@aut.ac.ir [Faculty of Biomedical Engineering, Amirkabir University of Technology, 424 Hafez Ave., Tehran (Iran, Islamic Republic of); Kasra, Mehran, E-mail: mkasra@aut.ac.ir [Faculty of Biomedical Engineering, Amirkabir University of Technology, 424 Hafez Ave., Tehran (Iran, Islamic Republic of); Salahshour Kordestani, Soheila, E-mail: s.kordestani@aut.ac.ir [Faculty of Biomedical Engineering, Amirkabir University of Technology, 424 Hafez Ave., Tehran (Iran, Islamic Republic of); Bagheri Hariri, Mohiedin, E-mail: mohibagheri@gmail.com [Materials Science and Engineering Department, Sharif University of Technology, Azadi Ave., Tehran (Iran, Islamic Republic of)

    2014-09-01

    Gold nanotubes/nanowires (GNT/NW) were synthesized by using the template-assisted electrodeposition technique and mixed with castor oil–polyethylene glycol based polyurethane (PU) to fabricate porous composite scaffolds for biomedical application. 100 and 50 ppm of GNT/NW were used to synthesize composites. The composite scaffolds were characterized by Fourier transform infrared spectroscopy, dynamic mechanical thermal analysis, differential scanning calorimetry, and scanning electron microscopy. Cell attachment on polyurethane–GNT/NW composites was investigated using fat-derived mesenchymal stem cells. Addition of 50 or 100 ppm GNT/NW had significant effects on thermal, mechanical, and cell attachment of polyurethane. Higher crosslink density and better cell attachment and proliferation were observed in polyurethane containing 50 ppm GNT/NW. The results revealed that GNT/NW formed hydrogen bonding with the polyurethane matrix and improved the thermomechanical properties of nanocomposites. Compared with pure PU, better cellular attachment on polyurethane–GNT/NW composites was observed resulting from the improved surface properties of composites. - Highlights: • Polyurethane–gold nanotubes/nanowires (GNT/NWs) composites were synthesized. • Tan δ, E′ and E″ were increased upon addition of 50 ppm of GNT/NW. • Better cell attachment was observed in composites containing 50 ppm of GNT/NW. • GNT/NWs can make a bridge between the pores of the porous polymeric scaffolds. • GNT/NWs increased the crosslink density of the polymeric matrix.

  2. Synthesis and characterization of gold nanotube/nanowire–polyurethane composite based on castor oil and polyethylene glycol

    International Nuclear Information System (INIS)

    Gold nanotubes/nanowires (GNT/NW) were synthesized by using the template-assisted electrodeposition technique and mixed with castor oil–polyethylene glycol based polyurethane (PU) to fabricate porous composite scaffolds for biomedical application. 100 and 50 ppm of GNT/NW were used to synthesize composites. The composite scaffolds were characterized by Fourier transform infrared spectroscopy, dynamic mechanical thermal analysis, differential scanning calorimetry, and scanning electron microscopy. Cell attachment on polyurethane–GNT/NW composites was investigated using fat-derived mesenchymal stem cells. Addition of 50 or 100 ppm GNT/NW had significant effects on thermal, mechanical, and cell attachment of polyurethane. Higher crosslink density and better cell attachment and proliferation were observed in polyurethane containing 50 ppm GNT/NW. The results revealed that GNT/NW formed hydrogen bonding with the polyurethane matrix and improved the thermomechanical properties of nanocomposites. Compared with pure PU, better cellular attachment on polyurethane–GNT/NW composites was observed resulting from the improved surface properties of composites. - Highlights: • Polyurethane–gold nanotubes/nanowires (GNT/NWs) composites were synthesized. • Tan δ, E′ and E″ were increased upon addition of 50 ppm of GNT/NW. • Better cell attachment was observed in composites containing 50 ppm of GNT/NW. • GNT/NWs can make a bridge between the pores of the porous polymeric scaffolds. • GNT/NWs increased the crosslink density of the polymeric matrix

  3. The Use of Acceleration to Code for Animal Behaviours; A Case Study in Free-Ranging Eurasian Beavers Castor fiber.

    Directory of Open Access Journals (Sweden)

    Patricia M Graf

    Full Text Available Recent technological innovations have led to the development of miniature, accelerometer-containing electronic loggers which can be attached to free-living animals. Accelerometers provide information on both body posture and dynamism which can be used as descriptors to define behaviour. We deployed tri-axial accelerometer loggers on 12 free-ranging Eurasian beavers Castor fiber in the county of Telemark, Norway, and on four captive beavers (two Eurasian beavers and two North American beavers C. canadensis to corroborate acceleration signals with observed behaviours. By using random forests for classifying behavioural patterns of beavers from accelerometry data, we were able to distinguish seven behaviours; standing, walking, swimming, feeding, grooming, diving and sleeping. We show how to apply the use of acceleration to determine behaviour, and emphasise the ease with which this non-invasive method can be implemented. Furthermore, we discuss the strengths and weaknesses of this, and the implementation of accelerometry on animals, illustrating limitations, suggestions and solutions. Ultimately, this approach may also serve as a template facilitating studies on other animals with similar locomotor modes and deliver new insights into hitherto unknown aspects of behavioural ecology.

  4. The Use of Acceleration to Code for Animal Behaviours; A Case Study in Free-Ranging Eurasian Beavers Castor fiber.

    Science.gov (United States)

    Graf, Patricia M; Wilson, Rory P; Qasem, Lama; Hackländer, Klaus; Rosell, Frank

    2015-01-01

    Recent technological innovations have led to the development of miniature, accelerometer-containing electronic loggers which can be attached to free-living animals. Accelerometers provide information on both body posture and dynamism which can be used as descriptors to define behaviour. We deployed tri-axial accelerometer loggers on 12 free-ranging Eurasian beavers Castor fiber in the county of Telemark, Norway, and on four captive beavers (two Eurasian beavers and two North American beavers C. canadensis) to corroborate acceleration signals with observed behaviours. By using random forests for classifying behavioural patterns of beavers from accelerometry data, we were able to distinguish seven behaviours; standing, walking, swimming, feeding, grooming, diving and sleeping. We show how to apply the use of acceleration to determine behaviour, and emphasise the ease with which this non-invasive method can be implemented. Furthermore, we discuss the strengths and weaknesses of this, and the implementation of accelerometry on animals, illustrating limitations, suggestions and solutions. Ultimately, this approach may also serve as a template facilitating studies on other animals with similar locomotor modes and deliver new insights into hitherto unknown aspects of behavioural ecology. PMID:26317623

  5. HDO of guaiacol over NiMo catalyst supported on activated carbon derived from castor de-oiled cake

    Directory of Open Access Journals (Sweden)

    Viviana Ospina

    2015-08-01

    Full Text Available Physical and chemical activation methods were used to prepare two different activated carbons (ACs from castor de-oiled cake. H2O/CO2 mixture was used as the physical activating agent, and for chemical activation potassium carbonate (K2CO3 was used. For both materials, textural and chemical properties were characterized by N2 adsorption–desorption isotherms, thermogravimetric analysis (TGA, Fourier Transform Infrared Spectroscopy (FTIR, thermal programmed reduction (TPR, X-ray fluorescence (XRF, and scanning electron microscopy (SEM. The ACs were used as supports for NiMo sulfide catalysts, which were prepared by wetness impregnation and in-situ sulfided for the hydrodeoxygenation (HDO of guaiacol (GUA as a model compound of bio-oil. The HDO reaction was carried out in a typical batch reactor at 5 MPa of H2 and 350 °C. Under the same test conditions, commercial catalysts were also tested in the reaction. Although the commercial catalysts displayed higher GUA conversion, the prepared catalysts showed higher activity and non-oxygenated and saturated products yield. 

  6. Production of a novel mannosylerythritol lipid containing a hydroxy fatty acid from castor oil by Pseudozyma tsukubaensis.

    Science.gov (United States)

    Yamamoto, Shuhei; Fukuoka, Tokuma; Imura, Tomohiro; Morita, Tomotake; Yanagidani, Shusaku; Kitamoto, Dai; Kitagawa, Masaru

    2013-01-01

    Mannosylerythritol lipids (MELs) are glycolipid biosurfactants produced by various yeasts belonging to the genus Pseudozyma, which exhibit excellent surface activities as well as versatile biochemical activities. A study on P. tsukubaensis NBRC1940 as a mono-acetylated MEL (MEL-B) producer revealed that the yeast accumulated a novel glycolipid from castor oil at a yield of 22 g/L. Its main chemical structure was identified as 1-O-β-(2'-O-alka(e)noyl-3'-O-hydroxyalka(e)noyl-6'-O-acetyl-D-mannopyranosyl)-D-erythritol designated as "new MEL-B." The new MEL-B, comprising a hydroxy fatty acid had a reduced surface tension of 28.5 mN/m at a critical micelle concentration (CMC) of 2.2×10⁻⁵ M in water. The observed CMC was 5-fold higher than that of conventional MEL-B. When conventional MEL-B was dispersed in water, it self-assembled to form the lamellar (L(α)) phase at a wide range of concentrations. In contrast, new MEL-B formed spherical oily droplets similar to the sponge (L₃) phase, which is observed in aqueous solutions of di-acetylated MEL (MEL-A). The data suggest that the newly identified MEL-B is likely to have a different structure and interfacial properties compared to the conventional MELs, and could facilitate an increase in the application of glycolipid biosurfactants. PMID:23728329

  7. Inhibition of neutral lipase from castor bean lipid bodies by coenzyme A (CoA) and Oleoyl-CoA

    International Nuclear Information System (INIS)

    The neutral lipase (EC 3.1.1.3) in lipid body membranes isolated from the endosperm of 4 day old castor (Ricinus communis L.) seedlings catalyzes the hydrolysis of [14C]trioleoylglycerol, releasing [14C]oleic acid for up to 4 hours. However, the addition of Mg-ATP and coenzyme A (CoA), which are present in the cytoplasm of plant cells, caused a progressive inhibition of the neutral lipase such that after 15 minutes, release of [14C]oleic acid was almost undetectable. A fatty acyl CoA synthetase was found in the lipid body membrane which converts [14C]oleic acid produced from the lipase reaction to [14C]oleoyl-CoA under these conditions. The concentration of free oleoyl-CoA in the reaction mixture when the lipase was inhibited by 50% was calculated to be about 21 micromolar. It was found that a mixture of exogenously added oleoyl-CoA and CoA was most effective in causing lipase inhibition. Little inhibition of lipase was detected in the presence of CoA alone. It is possible that this effect is important in vivo in coordinating lipase activity with fatty acid oxidation

  8. New generation of CASTOR registered casks for high enriched, high burn-up fuel from German NPP

    International Nuclear Information System (INIS)

    Requirements for new cask designs for transport and long-term dry storage of spent fuel assemblies (FA) from LWR-reactors are based on both increased source terms of the LWR FA including MOX FA, as well as the demand for economical optimisation of decommissioning costs by increased cask capacities. For this, cask development is the challenge to create and establish cask designs that can accommodate more FA with higher source terms, each under fixed boundary conditions (i.e. transport requirements and limitations of the power plants as crane loads and/or fixed maximum dimensions). This task has been elaborated by working simultaneously on different development actions each focussed to improve the cask performance. In the following a brief summary will be presented to give an overview which developments and investigations have been and are still will be performed for development and safety analyses of the new CASTOR registered -designs under the main subjects: material investigation and qualification, component tests and verifications, detailed design analysis and not at least design verification

  9. 蓖麻油缓释微囊的研制%Study on the Preparation of Sustained-release Castor Oil Microcapsule

    Institute of Scientific and Technical Information of China (English)

    常明; 岳红坤; 牟微; 李慧; 郭敬敬

    2011-01-01

    [目的]对蓖麻油进行微胶囊化,制成蓖麻油缓释微胶囊.[方法]运用复凝聚法,以明胶和阿拉伯胶为囊材,蓖麻油为囊心物制备微囊.借助显微镜观察微囊形态;通过紫外分光光度计进行蓖麻油含量测定;以水为溶出介质考察该制剂的体外溶出情况;以包封率作为质量判定指标,采用单因素考察和正交试验优化处方工艺.[结果]蓖麻油缓释微囊的最佳制备工艺条件为:明胶和阿拉伯胶浓度皆为7.5%,甲醛用量为1.0 ml,pH值为3.80,材药比为6:1.按该处方制得的微囊囊型圆整光滑,载药量较高,并具有一定的缓释效果.[结论]复凝聚法可成功制备出包封率较高的蓖麻油缓释微囊,且产品稳定性良好.该法可操作性强,重复性好,有一定的实用价值.%[ Objective ] Microencapsulation was carried out for castor oil, thus, sustained-release castor oil microcapsule was prepared. [ Method ]Complex coacervation method was used, and taking gelatin and Arabic gum as capsule materials, in addition, castor oil was viewed as core materials to prepare micro-capsule. The shapes of microcapsules were observed with the help of microscope, the content of castor oil was determined based on ultraviolet spectrophotometer; and dissolution rate in vitro with water were investigated. With encapsulation efficiency as quahty evaluation index, furthermore, the prescription was optimized by single phoneme and orthogonal experiment. [ Result ] The best preparation technological conditions of sustained-release castor oil microcapsule were:the gelatin and the Arabic gum density was 7.5%, the formaldehyde amount was the 1.0 ml, pH value was 3.80, the proportion of raw material to medicine was 6∶1. According to this prescription, the shape of micro-capsule was rounding and smooth, and showed larger loading capacity, moreover, had certain sustained-release effect. [ Conclusion ] The duplicate condensation law may successfully prepared

  10. Irrigation of Castor Bean (Ricinus communis L. and Sunflower (Helianthus annus L. Plant Species with Municipal Wastewater Effluent: Impacts on Soil Properties and Seed Yield

    Directory of Open Access Journals (Sweden)

    Vasileios A. Tzanakakis

    2011-11-01

    Full Text Available The effects of plant species (castor bean (Ricinus communis L. versus sunflower (Helianthus annus L. and irrigation regime (freshwater versus secondary treated municipal wastewater on soil properties and on seed and biodiesel yield were studied in a three year pot trial. Plant species were irrigated at rates according to their water requirements with either freshwater or wastewater effluent. Pots irrigated with freshwater received commercial fertilizer, containing N, P, and K, applied at the beginning of each irrigation period. The results obtained in this study showed that irrigation with effluent did not result in significant changes in soil pH, soil organic matter (SOM, total kjeldahl nitrogen (TKN, and dehydrogenase activity, whereas soil available P was found to increase in the upper soil layer. Soil salinity varied slightly throughout the experiment in effluent irrigated pots but no change was detected at the end of the experiment compared to the initial value, suggesting sufficient salt leaching. Pots irrigated with effluent had higher soil salinity, P, and dehydrogenase activity but lower SOM and TKN than freshwater irrigated pots. Sunflower showed greater SOM and TKN values than castor bean suggesting differences between plant species in the microorganisms carrying out C and N mineralization in the soil. Plant species irrigated with freshwater achieved higher seed yield compared to those irrigated with effluent probably reflecting the lower level of soil salinity in freshwater irrigated pots. Castor bean achieved greater seed yield than sunflower. Biodiesel production followed the pattern of seed yield. The findings of this study suggest that wastewater effluent can constitute an important source of irrigation water and nutrients for bioenergy crop cultivations with minor adverse impacts on soil properties and seed yield. Plant species play an important role with regard to the changes in soil properties and to the related factors of

  11. IDENTIFICATION OF CASTOR (RICINUS COMMUNIS L. ECOTYPES THROUGH MOLECULAR CHARACTERIZATION IN THE SELECTED REGIONS OF THE WESTERN GHATS OF KARNATAKA, INDIA

    Directory of Open Access Journals (Sweden)

    KG Manjunath and B Sannappa*

    2014-10-01

    Full Text Available Castor (Ricinus communis L. being a perennial crop widely grown for oil seed production in tropical and sub-tropical regions of the world.  Nevertheless, the leaf of castor serves as a primary food for the eri silkworm, Samia cynthia ricini Boisduval. Eri silkworm being a polyvoltine requires leaf throughout the year for its survival and cocoon production. Keeping this in view, an attempt has been made to identify (through molecular characterization the best castor ecotype(s found in different regions of Western Ghats of Karnataka, India for leaf production. The ecotypes were processed through DNA sequencing using ITS4 and ITS5 primers. The sequence results were authenticated through National Centre for Biotechnology Information by way of obtaining accession numbers (phylogenetic tree. Further, leaf samples were subjected to SDS-PAGE to know the variations existed among the ecotypes in protein profile. The results revealed that, ecotypes of different regions exhibits close relation among them and some marginal variations were evident in phylogenetic tree as well as in dendrogram. However, phylogenetic relationship of ecotypes in the major clade II and cluster III showed similar in both phylogeny and dendrogram for eight among 12 ecotypes representing different agro-ecological regions of Western Ghats of Karnataka.  Further, five ecotypes showed close relationship in both phylogenetic as well as in cluster dendrogram, but in clades I and III, bootstrap values showed minor variation among the ecotypes representing different regions of the Western Ghats. Whereas, in protein profile clusters I and II showed similarities between the ecotypes having genetic distance of 0.57. The maximum of 18 protein bands were found in KJ130046 ecotype, accordingly, minimum bands (10 were noticed in both KJ000404 and KJ000405 ecotypes.

  12. Adding value to a toxic residue from the biodiesel industry: production of two distinct pool of lipases from Penicillium simplicissimum in castor bean waste.

    Science.gov (United States)

    Godoy, Mateus G; Gutarra, Melissa L E; Castro, Aline M; Machado, Olga L T; Freire, Denise M G

    2011-08-01

    In countries with a strong agricultural base, such as Brazil, the generation of solid residues is very high. In some cases, these wastes present no utility due to their toxic and allergenic compounds, and so are an environmental concern. The castor bean (Ricinus communis) is a promising candidate for biodiesel production. From the biodiesel production process developed in the Petrobras Research Center using castor bean seeds, a toxic and alkaline waste is produced. The use of agroindustrial wastes in solid-state fermentation (SSF) is a very interesting alternative for obtaining enzymes at low cost. Therefore, in this work, castor bean waste was used, without any treatment, as a culture medium for fungal growth and lipase production. The fungus Penicillium simplicissimum was able to grow and produce an enzyme in this waste. In order to maximize the enzyme production, two sequential designs-Plackett-Burman (variable screening) followed by central composite rotatable design (CCRD)-were carried out, attaining a considerable increase in lipase production, reaching an activity of 155.0 U/g after 96 h of fermentation. The use of experimental design strategy was efficient, leading to an increase of 340% in the lipase production. Zymography showed the presence of different lipases in the crude extract. The partial characterization of such extract showed the occurrence of two lipase pools with distinct characteristics of pH and temperature of action: one group with optimal action at pH 6.5 and 45°C and another one at pH 9.0 and 25°C. These results demonstrate how to add value to a toxic and worthless residue through the production of lipases with distinct characteristics. This pool of enzymes, produced through a low cost methodology, can be applied in different areas of biotechnology. PMID:20844923

  13. 响应面法优化蓖麻碱提取工艺%Optimization of extraction process for ricinine from castor by response surface methodology

    Institute of Scientific and Technical Information of China (English)

    穆莎茉莉; 冀照君; 张树军; 苏亚拉图; 狄建军

    2012-01-01

    The extraction process for ricinine from castor was optimized by response surface methodology with the yield of ricinine from castor as investigare index. Based on the single-factor tests, the center combination experiment was esbablished with three key factors of extraction temperature,extraction time and solvent volume. The extraction process parameters of extraction temperature, extraction time and solvent volume were optimized through response surface analysis.The results showed that optimal extraction process parameters were extraction temperature of 86℃,extraction time of 4.3h and solvent volume of 132mL.Under the optimal extraction conditions, the yield of ricinine from castor was up to 2.88‰.%采用响应面法优化蓖麻碱提取工艺。以蓖麻碱提取率为考察指标,在单因素实验的基础上,选取提取温度、提取时间及溶剂加入量三个因素进行中心组合实验,通过响应面分析法对提取温度、提取时间及溶剂加入量进行优化,得到蓖麻碱提取的最佳温度86℃,最佳提取时间4.3h,最佳溶剂量132mL,此时蓖麻碱的提取率为2.88‰。

  14. AGRIFIS - simulator prospecting scenarios and evaluation of projects for production of seeds, in nature oil and castor oil biodiesel; AGRIFIS - simulador de prospeccao de cenarios e avaliacao de projetos de producao de sementes, oleo in natura e biodiesel de mamona

    Energy Technology Data Exchange (ETDEWEB)

    Polizel, L.H.; Tahan, C.M.V.; Pelegrini, M. A.; Soares, B.F. [Universidade de Sao Paulo (ENERQ/USP), SP (Brazil). Centro de Estudos em Regulacao e Qualidade de Energia], Email: cmvtahan@pea.usp.br; Takeno, H.K. [Companhia Energetica de Petrolina (CEP), PE (Brazil); Silva, O.C. da; Monteiro, B.; Velazquez, S.M.S.G. [Universidade de Sao Paulo (CENBIO/USP), SP (Brazil). Centro Nacional de Referencia em Biomassa; Drumond, M.A.; Anjos, J.B. dos [EMBRAPA Semi-Arido - Empresa Brasileira de Pesquisa Agropecuaria (EMBRAPA), Petrolina, PE (Brazil)

    2006-07-01

    This paper presents a model conceived for scenario prospection and project evaluation of small scale castor bean farming, oil extraction and bio diesel production (transesterification) integrated chain. To evaluate the performance of each project the model adopts financial, social and environmental index such as NPV, IRR, SPB, DPB, production costs, family income, number of settled families and employment. The model was implemented in a computational environment, allowing its use as a decision support tool for investments on the castor bean production chain; it calculates the cash flow of the entire project and of each family, including earnings, debts, taxes, interest and amortization. (author)

  15. 蓖麻油合成尼龙-11树脂可行性研究%STUDY ON THE SYNTHESIS OF OYLON-11 RESIN FEASIBILITY OF CASTOR OIL

    Institute of Scientific and Technical Information of China (English)

    王枝光; 孙天鹤; 王宏波

    2014-01-01

    The development and application of castor oil are elucidated. Describes the research status of nylon 11 at home and abroad, finally introduced the research process and the feasibility of synthetic nylon11 with castor oil as raw material.%论述了蓖麻油的发展和应用开发。阐述了尼龙11的国内外研究现况,最后介绍了以蓖麻油为原料合成尼龙11的生产工艺和可行性研究。

  16. Preparation and Characterization of All-Biomass Soy Protein Isolate-Based Films Enhanced by Epoxy Castor Oil Acid Sodium and Hydroxypropyl Cellulose

    OpenAIRE

    La Wang; Jianzhang Li; Shifeng Zhang; Junyou Shi

    2016-01-01

    All-biomass soy protein-based films were prepared using soy protein isolate (SPI), glycerol, hydroxypropyl cellulose (HPC) and epoxy castor oil acid sodium (ECOS). The effect of the incorporated HPC and ECOS on the properties of the SPI film was investigated. The experimental results showed that the tensile strength of the resultant films increased from 2.84 MPa (control) to 4.04 MPa and the elongation at break increased by 22.7% when the SPI was modified with 2% HPC and 10% ECOS. The increas...

  17. 蓖麻油脂肪酸镁生产技术研究与应用%Production Technology Research and Application of Magnesium Castor Oil Fatty Acid

    Institute of Scientific and Technical Information of China (English)

    王恩; 许广秀

    2011-01-01

    In this thesis,the production technology of Magnesium castor oil fatty acid was studied,saponification reaction,double decomposition reaction,spin-drying,drying processes,etc were studied specially to determine the appropriate technology specification.%研究了蓖麻油脂肪酸镁的生产技术,对生产过程中的皂化反应、复分解反应、甩干、烘干工序等进行了专题研究,确定了相应的工艺技术指标.

  18. A Comparative Experimental Analysis of Tribological Properties Between Commercial Mineral Oil and Neat Castor Oil using Taguchi Method in Boundary Lubrication Regime

    OpenAIRE

    Bhaumik, S; Pathak, S. D.

    2016-01-01

    The present work aims to carry out a comparative experimental analysis of tribological properties of 372cSt mineral oil and 229cSt castor oil. The antiwear and extreme pressure properties of both the oils have been analysed according to ASTM G 99 and ASTM D-2783 standards. The surfaces of the balls and pins after tribo tests have been analysed using Scanning Electron Microscope (SEM) images. The present test results predict that the antiwear and extreme pressure properties in case of the sele...

  19. Stability Assessment of Injectable Castor Oil-Based Nano-sized Emulsion Containing Cationic Droplets Stabilized by Poloxamer–Chitosan Emulsifier Films

    OpenAIRE

    S Tamilvanan; Kumar, B. Ajith; Senthilkumar, S. R.; Baskar, Raj; Sekharan, T. Raja

    2010-01-01

    The objectives of the present work were to prepare castor oil-based nano-sized emulsion containing cationic droplets stabilized by poloxamer–chitosan emulgator film and to assess the kinetic stability of the prepared cationic emulsion after subjecting it to thermal processing and freeze–thaw cycling. Presence of cryoprotectants (5%, w/w, sucrose +5%, w/w, sorbitol) improved the stability of emulsions to droplet aggregation during freeze–thaw cycling. After storing the emulsion at 4°C, 25°C, a...

  20. Dissociation of castor oil-induced diarrhoea and intestinal mucosal injury in rat: effect of NG-nitro-L-arginine methyl ester.

    OpenAIRE

    Capasso, F; Mascolo, N; Izzo, A A; Gaginella, T S

    1994-01-01

    1. Castor oil (2 ml orally) produced diarrhoea in rats 1-7 h after challenge, which was associated with gross damage to the duodenal and jejunal mucosa. 2. The injury was accompanied by release of acid phosphatase into the gut lumen, indicating cellular injury. 3. Intraperitoneal injection of the nitric oxide (NO) synthase inhibitor NG-nitro-L-arginine methyl ester (L-NAME, 2.5-50 mg kg-1 twice), prevented the diarrhoea. The dose of L-NAME (50 mg kg-1) completely blocked the diarrhoea but inc...

  1. Design to monitor trend in abundance and presence of American beaver (Castor canadensis) at the national forest scale.

    Science.gov (United States)

    Beck, Jeffrey L; Dauwalter, Daniel C; Gerow, Kenneth G; Hayward, Gregory D

    2010-05-01

    Wildlife conservationists design monitoring programs to assess population dynamics, project future population states, and evaluate the impacts of management actions on populations. Because agency mandates and conservation laws call for monitoring data to elicit management responses, it is imperative to design programs that match the administrative scale for which management decisions are made. We describe a program to monitor population trends in American beaver (Castor canadensis) on the US Department of Agriculture, Black Hills National Forest (BHNF) in southwestern South Dakota and northeastern Wyoming, USA. Beaver have been designated as a management indicator species on the BHNF because of their association with riparian and aquatic habitats and its status as a keystone species. We designed our program to monitor the density of beaver food caches (abundance) within sampling units with beaver and the proportion of sampling units with beavers present at the scale of a national forest. We designated watersheds as sampling units in a stratified random sampling design that we developed based on habitat modeling results. Habitat modeling indicated that the most suitable beaver habitat was near perennial water, near aspen (Populus tremuloides) and willow (Salix spp.), and in low gradient streams at lower elevations. Results from the initial monitoring period in October 2007 allowed us to assess costs and logistical considerations, validate our habitat model, and conduct power analyses to assess whether our sampling design could detect the level of declines in beaver stated in the monitoring objectives. Beaver food caches were located in 20 of 52 sampled watersheds. Monitoring 20 to 25 watersheds with beaver should provide sufficient power to detect 15-40% declines in the beaver food cache index as well as a twofold decline in the odds of beaver being present in watersheds. Indices of abundance, such as the beaver food cache index, provide a practical measure of

  2. Use of linear and areal habitat models to establish and distribute beaver Castor fiber harvest quotas in Norway

    Directory of Open Access Journals (Sweden)

    Howard Parker

    2013-12-01

    Full Text Available In Norway the Eurasian beaver Castor fiber harvest is quota-regulated. Once the annual quota for each municipality has been determined it is distributed to landowner-organized beaver management units. Municipal wildlife managers can choose between two distributional models: the traditional “areal model” whereby each management unit receives its portion of the municipal quota based on the relative area of beaver habitat within the township that it contains, or the more recently developed “linear model” based on the relative length of beaver-utilized shoreline it contains. The linear model was developed in an attempt to increase the precision of the quota distribution process and is based on the fact that beaver occupy landscapes in a linear fashion along strips of shoreline rather than exploiting extensive areas. The assumption was that the linear model would provide a more precise and just method of distributing the municipal quota among landowners. Here we test the hypothesis that the length of beaverutilized shoreline is a better predictor of beaver colony density than the area of beaver habitat on 13 beaver management units of typical size (794 – 2200 hectares in Bø Township, Norway, during 2 years. As hypothesized, the number of beaver occupied sites on management units correlated significantly (p≤ 0.001 with the length of beaver-utilized shoreline, but not with the area of beaver habitat. Therefore municipalities should employ the linear model when a precise distribution of quotas is necessary. The density of Eurasian beaver colonies at the landscape scale (>100 km2 in south-central Scandinavia averages approximately 1 occupied site per 4 km2. This figure can be employed by municipal wildlife managers to estimate the colony density in their townships, and to calculate municipal quotas, when more precise census information is lacking.

  3. Detoxified castor meal in substitution of soybean meal in sheep diet: growth performance, carcass characteristics and meat yield.

    Science.gov (United States)

    Menezes, Daniel Ribeiro; Costa, Roberto Germano; de Araújo, Gherman Garcia Leal; Pereira, Luiz Gustavo Ribeiro; de Medeiros, Geovergue Rodrigues; Oliveira, Juliana Silva; Nascimento, Thiago Vinicius Costa; de Souza Rodrigues, Rafael Torres; Filho, José Morais Pereira; Busato, Karina Costa

    2016-02-01

    The aim of this study was to evaluate the intake, digestibility, performance, and carcass characteristics of lambs fed different levels of replacement (0, 15, 30, and 45 % based on dry matter, DM) of soybean meal (SM) by detoxified castor meal (DCM). Twenty-four and 32 intact hair lambs of nondescript breed (21.7 ± 2.6 kg of initial average body weight and approximately 10 months old) were used, respectively, in the intake and digestibility and performance experiments. The diets were composed of buffel grass hay, ground corn grain, and different levels of SM, DCM, and urea, in a roughage-to-concentrate ratio of 40:60. There was no effect of treatments on DM intake. However, crude protein (CP) and neutral detergent fiber (NDF) intakes were higher at 30 and 45 % than at 0 and 15 % of DCM, which in turn showed higher intake of non-fiber carbohydrates (NFC) (P < 0.05). The organic matter, CP, and NDF digestibilities were not affected, but the digestibility of NFC was lower at 30 and 45 % than at 0 % of DCM (P < 0.05). The average daily gain, feed conversion, slaughter and carcass weights, chilling losses, ribeye area, and absolute values and yields of neck, ribs, loin, and leg were not affected. However, the carcass yield was lower at 45 % of DCM and the absolute value of shoulder was lower at 30 and 45 % of DCM (P < 0.05). The replacement of SM by DCM up to 45 % in the feed of lambs did not negatively affect the intake, digestibility, performance, and main carcass features. PMID:26563274

  4. Wound Healing Bionanocomposites Based on Castor Oil Polymeric Films Reinforced with Chitosan-Modified ZnO Nanoparticles.

    Science.gov (United States)

    Díez-Pascual, Ana M; Díez-Vicente, Angel L

    2015-09-14

    Castor oil (CO), which is a readily available, relatively inexpensive, and environmentally benign nonedible oil, has been successfully used as matrix material to prepare biocompatible and biodegradable nanocomposite films filled with chitosan (CS)-modified ZnO nanoparticles. The biocomposites were synthesized via a simple and versatile solution mixing and casting method. The morphology, structure, thermal stability, water absorption, biodegradability, cytocompatibility, barrier, mechanical, viscoelastic, antibacterial, and wound healing properties of the films have been analyzed. FT-IR spectra were used to obtain information about the nanoparticle-matrix interactions. The thermal stability, hydrophilicity, degree of porosity, water absorption, water vapor transmission rate (WVTR), oxygen permeability (Dk), and biodegradability of the films increased with the CS-ZnO loading. The WVTR and Dk data obtained are within the range of values reported for commercial wound dressings. Tensile tests demonstrated that the nanocomposites displayed a good balance between elasticity, strength, and flexibility under both dry and simulated body fluid (SBF) environments. The flexibility increased in a moist atmosphere due to the plasticization effect of absorbed water. The nanocomposites also exhibited significantly enhanced dynamic mechanical performance (storage modulus and glass transition temperature) than neat CO under different humidity conditions. The antibacterial activity of the films against Escherichia coli, Staphylococcus aureus, and Micrococcus luteus bacteria was investigated in the presence and the absence of UV light. The biocide effect increased progressively with the CS-ZnO content and was systematically stronger against Gram-positive cells. Composites with nanoparticle loading ≤5.0 wt % exhibited very good in vitro cytocompatibility and enabled a faster wound healing than neat CO and control gauze, hence showing great potential to be applied as antibacterial

  5. Calculation methods for demonstration of cladding tube integrity during dry long-term interim storage of fuel elements in CASTOR registered V casks

    International Nuclear Information System (INIS)

    The interim storage of spent fuel elements at the plant site of German nuclear power plants is using CASTOR registered V casks. In the frame of inventory extension fuel elements with higher burn-up are stored that result in higher decay heat und higher EOL pressures. For demonstration of heat removal of the CASTOR registered V cask during the interim storage it has to be shown that the reached temperatures comply with the limiting values to ensure the safety objective. To exclude cladding tuve failure two criteria have to be fulfilled during the interim storage: (A) the maximum tangential stress in the cladding must not surmount 120 MPa. (B) the persistent tangential strain at the cladding at the end of the storage time must not surmount 1%. The authors describe the calculation methodology for the temperatures in the casks taking into account the heat removal from the cask surface by radiant heat transfer and convection, the maximum allowable internal pressure and the resulting tangential strain in the cladding tube.

  6. Supply chain management of the castor biodiesel in the Bahia state, Brazil; Gestao da cadeia de suprimentos do biodiesel de mamona no estado da Bahia

    Energy Technology Data Exchange (ETDEWEB)

    Freires, Francisco G.M.; Goncalo, Thomas E.E.; Oliveira, Danillo R.S.B. [Universidade Federal do Vale do Sao Francisco (UNIVASF), Juazeiro, BA (Brazil)], E-mail: francisco.gaudencio@univasf.edu.br

    2009-07-01

    In front of the global trend for developing new ways of energy that pollute less and are renewable, Brazil emerges as a major actor in the development and use of technology for the production of biofuels. In the context of the potential of semi-arid to produce some oil used in production, the Brazilian government is enabling the production of Northeastern region. The State of Bahia is the largest producer of castor oil from Brazil, with an estimated production of 102.8 thousand tonnes of grain in the season 2008/2009 (CONAB, 2009). The development of the sector depends on appropriate government actions to support their competitive sustainability, and encouraging the improvement of management techniques in all involved. In that scenario, the logistics contributes to the development of this sector through the supply chain management. One conclusion is that the competitiveness and sustainability of the supply chain of castor in the Semi-arid of Bahia practices depends on the adoption of integrated logistics, without which the current failures prevent the consolidation of governmental objectives defined. (author)

  7. Research on Castor Oil Modified Epoxy Primer for Polyurea%蓖麻油改性环氧基聚脲底漆的研究

    Institute of Scientific and Technical Information of China (English)

    张虎; 张伶俐; 陈博远; 李国荣; 廖昔虬; 纪凤龙

    2013-01-01

    Aproprietary epoxy primer for polyurea was prepared with castor oil, silane coupling agent, etc. In the film -forming process, castor oil's hydroxyl was bonded on substrate via hydrogen bond, which also reacted with the residual isocyanate group (-NCO) in polyurea layer, forming a bridge, reducing the internal stress of the paint film and improving the film flexibility, impact resistance, bonding strength and peel resistance.%采用蓖麻油、硅烷偶联剂等制备了聚脲专用环氧树脂底漆.在底漆的成膜过程中,蓖麻油能与基材形成氢键,同时与聚脲层中残留的异氰酸根(-NCO)反应,起到桥接作用,降低了漆膜的内应力,改善了漆膜柔韧性、耐冲击性,提高了粘结强度及耐剥离性能.

  8. Conditioning of spent fuel assemblies from the Rossendorf RFR research reactor in transport and storage containers of the type CASTOR MTR 2

    International Nuclear Information System (INIS)

    Most of the spent fuel assemblies are temporarily stored in the flooded fuel ponds AB 1 and AB 2 of the RFR, and some are still in the reactor core. The conditioning task described here is part of the RFR spent fuel management concept and covers the safe emplacement of the spent fuel elements in the CASTOR MTR 2 shipping containers and the sealing of the containers in compliance with the nuclear licence issued for the conditioning task. The transfer of the spent fuel assemblies from the present wet storage conditions to the dry storage conditions in the CASTOR MTR 2 containers is done by a mobile manipulation equipment consisting essentially of the transfer sluice gate and a transfer container. Subsequent to conditioning, the shipping containers are to be transported to a licensed intermediate storage facility to await their transport to a national radwaste repository. The technical handling tools for the transfer and manipulation are briefly described, as well as the process steps involved, putting emphasis on the detailed description of processes and the accompanying time frame, so that the conditioning task can be incorporated into the work plan of the entire project. The report further presents the EDP concept established for the task, including the required data archivation and documentation. (orig.)

  9. Synthesis and characterisation of simultaneous interpenetrating polymer networks (SIN formed by polystyrene and polyurethane obtained from castor oil and cassava starch polyol-suspensions

    Directory of Open Access Journals (Sweden)

    Juan Manuel Cabrera Anaya

    2011-01-01

    Full Text Available Castor oil was modified by transesterification with pentaerythritol and cassava starch was subsequently incorporated into this oil (oil modified by incorporating starch is called a polyol-suspension. Polyurethane/polystyrene SINs (simulta- neously produced IPNs were synthesised from them and styrene. Reactants used in the synthesis were MDI (methylene diphenyl diisocyanate as diisocyanate, DVB (divinylbenzene as crosslinking agent for polystyrene, dibutylamine as redox primer and benzoyl peroxide as styrene polymerisation primer. The variables considered in SIN synthesis were percentage weight ratio used in the modification (1.32%; 2.64% and 5.28% to increase polyol hydroxyl functionality, starch species incorporated into polyol (Brazilian, Venezuelan and commercial to vary the amount of amylopectin within the polyol-suspension, diisocyanate/hydroxyl NCO/OH (0.85 and 1 functional groups’ molar ratio and polyurethane/ polystyrene PU/PS weight ratio (70/30 and 80/20. A wide range of materials was obtained and characterised by tensile strength, hardness, chemical attack and Soxhlet extraction. The physical-mechanical properties of the materials produced with polyols (transesterified castor oil were improved when starch was incorporated into the polyol. Several tests indicated that 24 hours as curing time were not enough, because the SINs showed lower physical-mechanical properties than the homologous polyurethane elastomers did; thus, the curing time had to be increased to 48 hours.

  10. 蓖麻油及其衍生物的制备与应用研究进展%Research advance in preparation and application of castor seed oil and its derivatives

    Institute of Scientific and Technical Information of China (English)

    黄晓义; 路遥

    2011-01-01

    As a kind of cheap and essential reproducible bio - resource, castor seed oil is used widely in the chemical field, medicine and national defense. The research progresses of castor seed oil and its derivatives in polyurethane materials, biodiesel, coating, lubricants, nylon and medicine were introduced.Castor seed oil could be used as raw stuff to prepare many materials which could solve the problem of absent petroleum and extend its application fields, and promote the development of castor seed oil deep -processing industrial.%蓖麻油作为一种价格低廉的可再生资源,在化工、医药、国防等领域有着广泛应用.介绍了蓖麻油及其衍生物在聚氨醋材料、生物柴油、涂料、润滑油、尼龙材料、药物等方面的应用研究进展,指出以蓖麻油为原料改性和制备各种产品不仅可缓解对日趋紧缺的石油资源的依赖,而且拓宽了蓖麻油的应用领域,对于推动我国蓖麻油深加工的发展有着重要意义.

  11. Lubricity and Lubricating Mechanism of Castor Oil as Lubricity Improver of Jet Fuel%蓖麻油用作喷气燃料润滑剂的润滑性及润滑机制

    Institute of Scientific and Technical Information of China (English)

    李进; 陈国需; 胡泽祥; 赵立涛; 杜鹏飞

    2015-01-01

    利用红外光谱仪分析蓖麻油结构特征,采用高频往复试验机HFRR考察蓖麻油在喷气燃料中的摩擦学性能,利用SEM及EDS能谱仪对蓖麻油润滑下的钢球磨斑形貌和表面组成进行分析,并探讨其润滑机制。结果表明,喷气燃料对蓖麻油具有较好的感受性,蓖麻油在喷气燃料中具有一定润滑作用,其作用机制可能是蓖麻酸先物理吸附在金属表面上,形成一层物理吸附膜,随着蓖麻油添加量的增加,蓖麻油开始化学吸附在金属表面上,形成了一层含氧的化学保护膜,起到了抗磨效果。%The castor oil was characterized using Infrared spectrometer and its tribological properties as anti⁃wear addi⁃tive in jet fuel were evaluated using the High Frequency reciprocating rig (HFRR).The morphologies and elemental distri⁃butions of the worn steel surface lubricated by castor oil were analyzed by means of scanning electron microscopy and EDS for discussing its lubricating mechanism.The results show that the jet fuel shows a good sensitivity to castor oil, and castor acid contributes to improve the lubricity of jet fuel.The anti⁃wear mechanism of castor oil can be concluded that castor acid is adsorbed on the metal surface physically at first, while a chemical⁃adsorbing film of containing oxygen is formed at a mass addition of castor oil, resulting in a good lubricating effect.

  12. Ectopic overexpression of castor bean LEAFY COTYLEDON2 (LEC2 in Arabidopsis triggers the expression of genes that encode regulators of seed maturation and oil body proteins in vegetative tissues

    Directory of Open Access Journals (Sweden)

    Hyun Uk Kim

    2014-01-01

    Full Text Available The LEAFY COTYLEDON2 (LEC2 gene plays critically important regulatory roles during both early and late embryonic development. Here, we report the identification of the LEC2 gene from the castor bean plant (Ricinus communis, and characterize the effects of its overexpression on gene regulation and lipid metabolism in transgenic Arabidopsis plants. LEC2 exists as a single-copy gene in castor bean, is expressed predominantly in embryos, and encodes a protein with a conserved B3 domain, but different N- and C-terminal domains to those found in LEC2 from Arabidopsis. Ectopic overexpression of LEC2 from castor bean under the control of the cauliflower mosaic virus (CaMV 35S promoter in Arabidopsis plants induces the accumulation of transcripts that encodes five major transcription factors (the LEAFY COTYLEDON1 (LEC1, LEAFY COTYLEDON1-LIKE (L1L, FUSCA3 (FUS3, and ABSCISIC ACID INSENSITIVE 3 (ABI3 transcripts for seed maturation, and WRINKELED1 (WRI1 transcripts for fatty acid biosynthesis, as well as OLEOSIN transcripts for the formation of oil bodies in vegetative tissues. Transgenic Arabidopsis plants that express the LEC2 gene from castor bean show a range of dose-dependent morphological phenotypes and effects on the expression of LEC2-regulated genes during seedling establishment and vegetative growth. Expression of castor bean LEC2 in Arabidopsis increased the expression of fatty acid elongase 1 (FAE1 and induced the accumulation of triacylglycerols, especially those containing the seed-specific fatty acid, eicosenoic acid (20:1Δ11, in vegetative tissues.

  13. Identificación de los mecanismos subyacentes a la invasión de Castor canadensis (Rodentia) en el archipiélago de Tierra del Fuego, Chile Identifying the mechanisms underlying the invasion of Castor canadensis (Rodentia) into Tierra del Fuego archipelago, Chile

    OpenAIRE

    PETRA K WALLEM; Jones, Clive G; Marquet, Pablo A.; Fabián M. Jaksic

    2007-01-01

    Castor canadensis es considerado un ingeniero ecosistémico arquetípico, ya que altera el estado de factores bióticos y abióticos, mediante interacciones no tróficas, modificando sustancialmente los ecosistemas que habita. Esta especie fue introducida en la Isla Grande de Tierra del Fuego en 1946 por el gobierno argentino, con el fin de estimular la industria peletera. Actualmente se encuentra presente en las principales islas del archipiélago, incluyendo Tierra del Fuego, Navarino, Dawson y H...

  14. Considerations on the construction testing of the CASTOR registered HAW 28M cask with respect to the traffic law in the view of the responsible authority BAM

    International Nuclear Information System (INIS)

    The authors reflect the construction testing of the CASTOR registered HAW 28M cask with respect to the traffic law in the view of the responsible authority BAM. The test procedures are based on the recommendations of the IAEA and the respective national and international legal regulations for the transport of radioactive materials. BAM is performing mechanical and thermal tests to investigate the safety of the containers in case of a severe accident. The radionuclide release has to be restricted to a defined limiting value, the radiation shielding and the nuclear safety have to be ensured. The component test is performed using prototypes of model containers combined with calculations or transferability considerations. The safety evaluation is usually based on experimental tests and numerical analyses.

  15. Study of castor oil polyurethane - poly(methyl methacrylate semi-interpenetrating polymer network (SIPN reaction parameters using a 2³ factorial experimental design

    Directory of Open Access Journals (Sweden)

    Fernanda Oliveira Vieira da Cunha

    2004-12-01

    Full Text Available In this work was employed a 2³ factorial experiment design to evaluate the castor oil polyurethane-poly(methyl methacrylate semi-IPN synthesis. The reaction parameters used as independent variables were NCO/OH molar ratio, polyurethane polymerization time and methyl methacrylate (MMA content. The semi-IPNs were cured over 28 h using two thermal treatments. The polymers were characterized by infrared and Raman spectroscopy, thermal analysis and swelling profiles in n-hexane. The glass transition temperature (Tg and the swelling were more affect by the NCO/OH molar ratio variation. The semi-IPNs showed Tg from - 27 to - 6 °C and the swelling range was from 3 to 22%, according to the crosslink density. The IPN mechanical properties were dependent on the cure temperature and MMA content in it. Lower elastic modulus values were observed in IPNs cured at room temperature.

  16. Thermal stability and fracture toughness of epoxy resins modified with epoxidized castor oil and Al{sub 2}O{sub 3} nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Lin; Jin, Fanlong [Jilin Institute of Chemical Technology, Jilin (China); Park, Soojin [Inha Univ., Incheon (Korea, Republic of)

    2012-04-15

    This study examined the effects of the epoxidized castor oil (ECO) and Al{sub 2}O{sub 3} content on the thermal stability and fracture toughness of the diglycidylether of bisphenol-A (DGEBA)/ECO/Al{sub 2}O{sub 3} ternary composites using a range of techniques. The thermal stability of the composites was decreased by the addition of ECO and Al{sub 2}O{sub 3} nanoparticles. The fracture toughness of the composites was improved significantly by the addition of ECO and Al{sub 2}O{sub 3} nanoparticles. The composite containing 3 wt % Al{sub 2}O{sub 3} nanoparticles showed the maximum flexural strength. Scanning electron microscopy (SEM) revealed tortuous cracks in the DGEBA/ECO/Al{sub 2}O{sub 3} composites, which prevented deformation and crack propagation.

  17. Terminal Derivative Product of Castor Oil:Nylon1010%蓖麻油的终端衍生产品-尼龙1010

    Institute of Scientific and Technical Information of China (English)

    赵学敬

    2016-01-01

    尼龙1010是我国研制成功的材料品种,工业用途重要。文章把它视作蓖麻油衍生产品的终端,对其产出的化工原理、各种性能、工业用途、以它为原料的制品加工方法,一一作了论述。%Nylon 1010 is a material developed in China, and has important industrial applications. As the terminal product of castor oil derivatives, this paper discussed the production theory, properties, industrial application, and preparation method of products made of nylon 1010.

  18. Evaluation of Castor Oil Cake Starch and Recovered Glycerol and Development of “Green” Composites Based on Those with Plant Fibers

    Directory of Open Access Journals (Sweden)

    José Luis Guimarães

    2016-01-01

    Full Text Available Continuous efforts are being made in some countries for the recovery of crude glycerin (RG/CG and castor oil cake (COC, the two byproducts of biodiesel production. These are expected to help, not only in addressing environmental safety, but also in adding value to those byproducts, which otherwise may go to waste. Finding ways to utilize those byproducts underlines the main objective of this study. This paper presents the evaluation of (i COC, glycerin and banana and sugarcane fibers for moisture content; (ii COC for structural and thermal properties; and (iii CG for its chemical characteristics. The possibility of using COC and CG with the selected fibers as reinforcement in the development of bio-composites is attempted through thermo-molding. Results revealed enhanced mechanical properties for these composites. The obtained results are discussed in terms of the observed morphology.

  19. Fitotoxicidade e seletividade do herbicida trifloxysulfuron sodium na mamona cultivar BRS Nordestina Toxicity and selectivity of trifloxysulfuron-sodium herbicide in castor bean cultivar BRS Nordestina

    Directory of Open Access Journals (Sweden)

    Uilma C. de Q. Ferreira

    2009-12-01

    Full Text Available A mamoneira (Ricinus communis L. da família das Euforbiáceas, é uma planta rústica, heliófila e resistente à seca, caracteriza-se por sua sensibilidade a diversos herbicidas e à competição imposta pelas plantas daninhas. Objetivou-se neste trabalho estudar a influência de distintas doses do herbicida trifloxysulfuron-sodium* em vários estádios de desenvolvimento da mamoneira, cultivar BRS Nordestina. O experimento foi conduzido em 2006, em condições de casa de vegetação da EMBRAPA - Algodão de Campina Grande, PB. O delineamento experimental foi inteiramente ao acaso, com esquema fatorial 4 x 4 + 1, constando de quatro dosagens 5,0; 7,5; 10,0 e 12,5 g ha-1 de trifloxysulfuron sodium e quatro estádios do desenvolvimento da planta (folhas cotiledonares, duas folhas verdadeiras, duas folhas expandidas e quatro folhas e uma testemunha absoluta. Foram testados, no total, dezessete tratamentos com quatro repetições. As variáveis mensuradas foram redução de crescimento e matéria seca da mamoneira, cultivar BRS Nordestina. Verificou-se, com base nos resultados obtidos para a variável redução de crescimento, refletida pela altura e tamanho das plantas, efeito significativo por doses e estádios do desenvolvimento e a interação entre eles, em que a planta mais nova foi mais sensível ao produto. O herbicida que atua nas folhas e raízes é fitotóxico para a mamoneira, cultivar BRS Nordestina, mesmo na menor dose testada.The castor been (Ricinus communis L. is a rustic plant, heliophile, resistant to drought, belonging to the family of Euforbiace. It is characterized by being sensitive to several herbicides and the competition imposed by harmful plants. This work had as objective to study the influence of different doses of the herbicide trifloxysulfuron-sodium in different states of development of the castor been, cultivar BRS Nordestina. The experiment was conducted during 2006, in a greenhouse of EMBRAPA - Cotton at Campina

  20. Studies on biodegradable and crosslinkable poly(castor oil fumarate)/poly(propylene fumarate) composite adhesive as a potential injectable biomaterial.

    Science.gov (United States)

    Mitha, M K; Jayabalan, M

    2009-12-01

    Biodegradable hydroxyl terminated-poly(castor oil fumarate) (HT-PCF) and poly(propylene fumarate) (HT-PPF) resins were synthesized as an injectable and in situ-cross linkable polyester resins for orthopedic applications. An injectable adhesive formulation containing this resin blend, N-vinyl pyrrolidone (NVP), hydroxy apatite, free radical initiator and accelerator was developed. The Composite adhesives containing the ratio of resin blend and NVP, 2.1:1.5, 2.1:1.2 and 2.1:1.0 set fast with tolerable exothermic temperature as a three dimensionally cross linked toughened material. Crosslink density and mechanical properties of the crosslinked composite increase with increase of NVP. The present crosslinked composite has hydrophilic character and cytocompatibility with L929 fibroblast cells. PMID:18592346

  1. Effects of reintroduced beaver (Castor canadensis) on riparian bird community structure along the upper San Pedro River, southeastern Arizona and northern Sonora, Mexico

    Science.gov (United States)

    Johnson, Glenn E.; van Riper, Charles, III

    2014-01-01

    Chapter 1.—We measured bird abundance and richness along the upper San Pedro River in 2005 and 2006, in order to document how beavers (Castor canadensis) may act as ecosystem engineers after their reintroduction to a desert riparian area in the Southwestern United States. In areas where beavers colonized, we found higher bird abundance and richness of bird groups, such as all breeding birds, insectivorous birds, and riparian specialists, and higher relative abundance of many individual species—including several avian species of conservation concern. Chapter 2.—We conducted bird surveys in riparian areas along the upper San Pedro River in southeastern Arizona (United States) and northern Sonora (Mexico) in order to describe factors influencing bird community dynamics and the distribution and abundance of species, particularly those of conservation concern. These surveys were also used to document the effects of the ecosystem-altering activities of a recently reintroduced beavers (Castor canadensis). Chapter 3.—We reviewed Southwestern Willow Flycatcher (Empidonax traillii extimus) nest records and investigated the potential for future breeding along the upper San Pedro River in southeastern Arizona, where in July 2005 we encountered the southernmost verifiable nest attempt for the species. Continued conservation and management of the area’s riparian vegetation and surface water has potential to contribute additional breeding sites for this endangered Willow Flycatcher subspecies. Given the nest record along the upper San Pedro River and the presence of high-density breeding sites to the north, the native cottonwood-willow forests of the upper San Pedro River could become increasingly important to E. t. extimus recovery, especially considering the anticipated effect of the tamarisk leaf beetle (Diorhabda carinulata) on riparian habitat north of the region.

  2. The Application of AMMO Model in Cross Breeding of Castor%AMMI模型在蓖麻杂交育种中的应用

    Institute of Scientific and Technical Information of China (English)

    张宝贤; 孙丽娟; 谭德云; 刘红光; 王光明

    2011-01-01

    The stability of variety yield traits is an important factor in the process of castor variety breeding and promotion. The general linear regression equation can only explain a small part of the interaction due to the interaction between genotype of variety and environment. Addition main effects and multiplication interaction (AMMI) model not only response interaction variance, but also accurately analyze the stability of varieties. The yield stability of four castor varieties was analyzed with AMMI model and biplot using data from multi-point tests in 2008-2009, and then evaluated stability and adaptability of varieties.%在蓖麻品种的育成与推广过程中,品种产量性状的稳定性是一个重要影响因子.由于品种的基因型和环境存在着交互作用,用一般的线性回归方程只能解释小部分交互作用.主效可加互作可乘模型(AMMI模型),不仅最大程度地反应互作变异,而且能准确地分析品种的稳定性.本文应用AMMI模型及双标图对4个蓖麻杂交组合2008-2009年多点试验的产量性状进行稳定性分析,进而评价各参试组合的稳定性和适应性.

  3. Identification of reference genes for quantitative RT-PCR analysis of microRNAs and mRNAs in castor bean (Ricinus communis L.) under drought stress.

    Science.gov (United States)

    Cassol, Daniela; Cruz, Fernanda P; Espindola, Kauê; Mangeon, Amanda; Müller, Caroline; Loureiro, Marcelo Ehlers; Corrêa, Régis L; Sachetto-Martins, Gilberto

    2016-09-01

    Quantitative real-time PCR (RT-qPCR) is one of the most powerful and sensitive techniques to the study of gene expression. Several factors influence RT-qPCR performance though, including the stability of the reference genes used for data normalization. While the selection of appropriate reference genes is crucial for accurate and reliable gene expression analysis, no suitable reference genes have been previously identified in castor bean under drought stress. In this study, the expression stability of eleven mRNAs, thirteen microRNAs (miRNAs) and one small nuclear RNA were analyzed in roots and leaves across different levels of water deficit. Three different algorithms were employed to analyze the RT-qPCR data, and the resulting outputs were merged using a non-weighted unsupervised rank aggregation method. Our analysis indicated that the Elongation factor 1-beta (EF1B), Protein phosphatase 2A (PP2A) and ADP-ribosylation factor (ADP) ranked as the best candidates across diverse samples submitted to different levels of drought conditions. EF1B and Glyceraldehyde 3-phosphate dehydrogenase (GAPDH), and EF1B and SKP1/ASK-interacting protein 16 (SKIP16) were found as the most suitable reference genes for expression analysis in roots and leaves, respectively. In addition, miRNAs miR168, miR160 and miR397 were selected as optimal reference genes across all tissues and treatments. miR168 and miR156 were recommended as reference for roots, while miR168 and miR160 were recommended for leaves. Together, our results constitute the first attempt to identify and validate the most suitable reference genes for accurate normalization of gene expression in castor bean under drought stress. PMID:27156134

  4. Synthesis and Properties of Cationic Waterborne Polyurethane Dispersions Modified by Castor Oil%蓖麻油改性阳离子型水性聚氨酯的合成及性能

    Institute of Scientific and Technical Information of China (English)

    饶舟; 张威; 王焕; 许戈文; 黄毅萍

    2012-01-01

    采用蓖麻油、异佛尔酮二异氰酸酯、聚己二酸乙二醇酯、聚丙二醇、一缩二乙二醇、N-甲基二乙醇胺、三羟甲基丙烷,合成了一系列蓖麻油改性阳离子型水性聚氨酯分散液.用红外光谱分析、粒径测试、智能电子拉力试验、摆杆硬度测试、热分析等对所合成的聚氨酯的结构、乳液的粒径和膜性能进行测试.结果表明:随着蓖麻油用量的增加,阳离子型水性聚氨酯乳液的粒径逐渐增加,膜的摆杆硬度及耐水性能逐渐增强:蓖麻油在树脂中质量分数达8.4%时,膜的摆杆硬度达到0.86;而蓖麻油在树脂中质量分数达6.4%时,阳离子型水性聚氨酯胶膜浸泡24 h的吸水率几近为零;且蓖麻油的引入,使胶膜的耐热性也有所提高.%Castor oil modified cationic waterborne polyurethane ( WPU) dispersions are prepared from castor oil,isophorone diisocyanate ( IPDI) ,polyethyleneglycol adipate ( PEGA ) ,polypropylene glycol (PPG),diethylene glycol (DEG) ,N - methyldiethanolamine ( MDEA) and trimethylolpropane(TMP) . The structure,emulsion particle distribution and film properties of the resulted WPU are characterized by Fourier transform infrared( FT - IR) ,particle size analyzer,intelligent tensile machine,pendulum tester and thermal gravimetric analysis ( TGA ) . The result indicates that the increase of castor oil leads to increase of emulsion particle size,and improvement of pendulum hardness and water resistance of the cured film. Specifically when the content of castor oil is 8. 4% ,the pendulum hardness of film is 0. 86. And when the content of castor oil is wt. 6. 4% ,the film shows its water absorption nearly zero after immersed for 24 hrs. Additionally ,the incorporation of castor oil causes improvement of heat resistance.

  5. Castor Rocket Launch [video

    OpenAIRE

    Yakimenko, Oleg; Naval Postgraduate School (U.S.)

    2010-01-01

    The Naval Postgraduate School (NPS) and the AIAA Point Lobos section (PLS) entered three rockets into the 2010 AIAA Young Professionals Rocket Competition (YPRC). The event took place in the Mojave Desert on Koehn Dry lakebed July 17th 2010.

  6. 蓖麻粕基生物有机无机复混肥及其应用%Castor Bean Cereal Based Bio-Organic-Inorganic Compound Fertilizers and Use

    Institute of Scientific and Technical Information of China (English)

    陈绍荣; 邵建华; 赵立新; 刘园园

    2014-01-01

    简要介绍了蓖麻粕基生物有机无机复混肥的性能及特点。通过玉米、水稻、花生大田肥效试验,结果证明蓖麻粕基生物有机无机复混肥具有较好的增产改土效果,可在粮油作物上推广应用。%A brief account is given of the properties and features of castor bean cereal based bio-organic-inorganic compound fertilizers.By field experiment of fertilizer efficiency with corn, rice and peanut , it is proved that castor bean cereal based bio-organic-inorganic compound fertilizers have better effects on increasing production and improving the properities of soil, and can be widely applied to grain and oil crops.

  7. Sample size to estimate the Pearson correlation coefficient among characters of castor bean
    Tamanho de amostra para a estimação do coeficiente de correlação linear de Pearson entre caracteres de mamoneira

    OpenAIRE

    Tatiani Reis da Silveira; Marcos Toebe; Betânia Brum; Sidinei José Lopes; Alberto Cargnelutti Filho; Gabriele Casarotto

    2012-01-01

    In the study of linear relationships, it is important to define correctly the sample size, to estimate the Pearson correlation coefficient among pairs of characters, with acceptable reliability. The aim of this research was to determine the sample size (number of plants) to estimate the Pearson correlation coefficient among 21 characters of castor bean. It was evaluated 41 and 55 plants of the Sara and Lyra hybrids, respectively, regarding to the characters of seed, seedling, adult plant and ...

  8. Development of Castor oil Modified Epoxy Polyurethane Anti-corrosion Coatings%蓖麻油改性环氧聚氨酯防腐蚀涂料的研制

    Institute of Scientific and Technical Information of China (English)

    李阳

    2012-01-01

    A kind of castor oil-modified epoxy polyurethane anti-corrosion coating was introduced. Castor oil modified isocyanate prepolymer and epoxy resin were used as basic materials,cheap talc, titanium dioxide, precipitated barium sulfate were used as pigment and filler , a kind of low cost and excellent performance anti-corrosion coating was developed. The performance of the coating developed under optimized conditions was detected. Castor oil modified epoxy polyurethane anti-corrosion coating and epoxy polyurethane anti-corrosion coating were compared. The results show that castor oil modified epoxy polyurethane anti-corrosion coating is better than epoxy polyurethane anti-corrosion coating in the aspects of acid - resistant, alkali - resistant and seawater - resistant.%介绍了一种蓖麻油改性的环氧聚氨酯防腐蚀涂料、以蓖麻油改性异氰酸酯预聚物和环氧树脂为基料,以价格较为低廉的滑石粉、钛白粉、沉淀硫酸钡为颜填料制备了成本较低,件能较为优异的防腐蚀涂料.检测了优化条件下制备的涂料的性能.以蓖麻油改性环氧聚氨酯防腐蚀涂料和未经蓖麻油改件的环氧聚氨酯防腐蚀涂料进行防腐蚀性能对比,蓖麻油改性环氧聚氨酯防腐蚀涂料的耐酸、碱、盐水等防腐蚀性能更好.

  9. Clinical analysis of castor oiled egg combined with diazepam in hastening parturition and inducing labor in 400 cases%蓖麻油联合地西泮用于催引产400例临床分析

    Institute of Scientific and Technical Information of China (English)

    贺同强; 米阳; 赵三纯

    2012-01-01

    Objective To investigate the effect and security of applying castor oiled egg and diazepam in hastening parturition and inducing labor for late pregnancy. Methods The clinical data of 400 cases of applying castor oiled egg and diazepam to hasten parturition and induce labor and taking vaginal delivery and that of 200 cases of natural childbirth without human intervention at the same period was retrospectively analyzed. Results The success rate of hastening with castor oiled egg and diazepam to hasten parturition for late pregnancy was 96. 5% , and that of inducing labor was 86.0% (X2 = 13. 81 ,P <0.01 ). Gestational weeks, indications of pregnancy termination and cervical maturity were related with the success rate. Conclusion The success rate is high and it is safe and convenient by applying castor oiled egg and diazepam to hasten parturition and induce labor.%目的 探讨蓖麻油蛋餐联合地西泮用于晚期妊娠催引产的效果及安全性.方法 对400例应用蓖麻油蛋餐联合地西泮催引产并经阴道分娩者与200例同期自然分娩无人为干预者的临床资料进行回顾性分析.结果 蓖麻油蛋餐联合地西泮用于晚期妊娠催产成功率为96.5%,引产成功率为86.0%,χ2=13.81,P<0.01.孕周、终止妊娠指征及宫颈成熟度与催引产成功率有关.结论 蓖麻油蛋餐联合地西泮催引产成功率高,用药安全方便.

  10. Sustainable and economic feasibility of castor bean oil production: a methodology to support investments decision taking; Viabilidade economica e sustentabilidade da producao de oleo de mamona: uma metodologia de suporte a decisao de investimentos

    Energy Technology Data Exchange (ETDEWEB)

    Maia, Glawther Lima [Universidade Federal do Ceara (UFC), Fortaleza, CE (Brazil). Mestrado em Logistica e Pesquisa Operacional; Arruda, Joao Bosco Furtado [Universidade Federal do Ceara (UFC), Fortaleza, CE (Brazil)

    2008-07-01

    The castor bean agribusiness is supported by a complex supply chain that involves several inputs, main products and other derived products. So, the control of production costs is a basic and extremely important activity for the optimization of management processes. Using literature research, case study and assessment of scenarios, the present work was developed with the objective of conceiving a methodology, based on theoretical and economical aspects, the formation of costs and the revenue forecasting, which is applied with the aid of a computational program for supporting decision taking in the castor bean small producers agribusiness. The results obtained in the case study show, for example, that about 40% of the projects are considered accepted under the criterion of recovering the invested capital in less than 2 years. Also, it reveals that 75% of the projects contribute for the increase of the producer income and about 63% of the projects provide enough profit to add value to the producer's properties. Finally, it is clear that the proposed methodology makes easier a better agricultural planning, allowing a better utilization of the raw material and it facilitates the analysis of diversifying other derived products and revenue sources in the castor bean chain. (author)

  11. Energy flow in castor bean (Ricinus communis L. production systems Fluxos de energia em sistemas de produção de mamona (Ricinus communis L.

    Directory of Open Access Journals (Sweden)

    Adilson Nunes da Silva

    2010-12-01

    Full Text Available Although energy analysis is a way to evaluate the sustainability of production systems, this practice is not often used in the agribusiness. In this context, the castor bean (Ricinus communis L is an agricultural crop not yet well studied despite its great potential in the Brazilian energetic scenario. This article aimed to evaluate the productive potential of the castor bean oil, using an energetic view applied to two management systems: low (System 1 and medium (System 2 technologies. The quantification of the used material fluxes was made converting these factors in energy units. The input energy fluxes were 3,170.6 MJ ha¹ and 10,366.0 MJ ha¹ for Systems 1 and 2, respectively. The energy balance of System 1 was 11,938.2 MJ ha¹ and that of System 2 16,296.5 MJ ha¹. The net energetic gain or the energy gain over the invested energy (EROI of System 1 was 3.8 and of System 2, 2.6. Although presenting a greater energy demand and a lower EROI, System 2 had a greater energy balance, demonstrating a better viability of this cultivation system for the production of castor bean oil.A análise energética é uma forma de se avaliar a sustentabilidade de um sistema produtivo, apesar de ainda pouco utilizada no setor agropecuário. Inserida neste setor encontra-se a produção da mamoneira (Ricinus communis L., cultura ainda pouco estudada e que apresenta grande importância para o agronegócio brasileiro. Avaliou-se sob a ótica energética a produção potencial de óleo de mamona em dois sistemas de cultivo: com baixa (Sistema 1 e média (Sistema 2 tecnologias. Foi realizada a quantificação dos fluxos de materiais empregados nos dois sistemas de produção e conversão destes fatores em unidades de energia. Os fluxos de energia de entrada foram de 3.170,6 MJ ha¹ e 10.366 MJ ha¹ para os sistemas 1 e 2, respectivamente. O balanço de energia foi de 11.938,2 MJ ha¹ no sistema 1 e 16.296,5 MJ ha¹ no sistema 2. A lucratividade energética, retorno

  12. Synthetic technology of castor oleic acid Trimethylolpropane ester%蓖麻油酸三羟甲基丙烷酯的合成工艺条件及性能

    Institute of Scientific and Technical Information of China (English)

    焦体; 胡文云; 唐志辉; 周诗磊; 邹晨

    2012-01-01

    以蓖麻油和三羟甲基丙烷为原料,通过皂化,酯化合成蓖麻油酸三羟酯,研究了原料配比,催化剂用量,反应温度,反应时间等对酯化反应的影响,最佳条件为:蓖麻油与三羟甲基丙烷的摩尔比为5∶4,,催化剂用量为蓖麻油酸质量的0.5%,反应温度180 ~ 200℃,反应时间4h.生成的蓖麻油酸三羟甲基丙烷酯为黄色透明液体,产率为86.48%,用红外光谱进行了定性分析,证明了目标产物的存在,采用了热重/差热综合热分析仪研究了其热稳定性,采用了运动粘度测定仪研究了其粘温性能.结果表明:其润滑性能、热稳定性、粘温性能满足工艺润滑油基础油的要求.%With castor oil and Trimethylolpropane as raw material, castor oleic acid ester was synthesized by the saponification and esterification. The ratio of raw material, catalyst dosage, reaction temperature and reaction time on the esterification of influence was studied. And the best conditions were as follows; castor oil and Trimethylolpropane mole ratio of 5: 4, catalyst dosage of the mass of oleic acid castor for 0. 5 % , reaction temperature 180-200 °C , reaction time 4 h. The Castor oleic acid Trimethylolpropane ester is a kind of yellow transparent liquid, production rate is 86.48%. It is proved the existence of the target product with infrared spectra of qualitative analysis. The results show that; the lubrication properties, thermal stability, glue temperature performance meet the technological requirements of base oil lubricating oil.

  13. 离子液体[Emim]Br中蓖麻油裂解制备仲辛醇的工艺%Preparation of 2-octanol through Castor Oil Pyrolysis in Ionic Liquid [Emim]Br

    Institute of Scientific and Technical Information of China (English)

    张东明; 张月娥; 黄凤岐

    2014-01-01

    The technological conditions for producing 2-octanol from castor oil in ionic liquid,[Emim]Br,was studied through single factor experiments and orthogonal experiments. The mass ratio of castor oil acid to ionic liquid,pyrolysis reaction time,temperature,and the ratio of castor oil acid to NaOH were investigated in detail. The optimal technological conditions obtained are as follows:the temperature was 300,℃,pyrolysis time was 90,min,the mass ratio of castor oil to ionic liquid was 1∶1,and the ratio of castor oil to alkali(6,mol/L)was 1∶1.5. The yield of 2-octanol was about 28.2%under the optimal technological conditions. In addition,the traditional solvent cresol was replaced by ionic liquid [Emim]Br,and pollution was reduced with this clean production method. The ionic liquid can be recycled and used again.%通过单因素实验和正交实验研究溴化3-甲基-1-乙基咪唑([Emim]Br)离子液体中蓖麻油裂解制备仲辛醇的工艺条件,分别考察蓖麻油酸与离子液体的质量比、裂解反应时间、裂解温度以及蓖麻油酸与 NaOH 溶液质量比对仲辛醇产率的影响,得出优化工艺条件:裂解温度300,℃、裂解时间90,min、蓖麻油酸和离子液体的质量比1∶1、蓖麻油酸与NaOH溶液(6,mol/L)的质量比1∶1.5,最优条件下仲辛醇的产率为28.2%.此方法用离子液体[Emim]Br替代传统有机溶剂甲酚,减少了污染,属清洁生产,而且离子液体可以回收再利用.

  14. Research on a clean preparation process of sebacic acid by catalytic cracking of castor oil%蓖麻油催化裂解制备癸二酸的清洁工艺研究

    Institute of Scientific and Technical Information of China (English)

    王彦雄; 张小里; 李红亚; 豆坤坤; 张甜甜; 姚娜

    2012-01-01

    The traditional preparation process of sebacic acid by cracking castor oil could cause serious environment pollution because of using o-cresol as the diluent and lead oxide as the catalyst. Using liquid paraffin as the diluent, an environmental friendly catalyst for preparation of sebacic acid was screened and the clean preparation process of sebacic acid was investigated. The results showed that iron oxide as the catalyst exhibited good cracking effect;sebacic acid yield of 67.2% and the purity of 99.0% after separation were attained under the optimum condition as follows:catalyst dosage 1.00% of castor oil mass, V( diluent) : V( castor oil) =4-1, V( sodium hydroxide): V( castor oil) =1:1,reaction temperature 280?, and reaction time 4 h. Using iron oxide as the catalyst and liquid paraffin as the diluent,a clean preparation process of sebacic acid by cracking castor oil will be expected to be developed.%传统的蓖麻油裂解制备癸二酸工艺因使用稀释剂邻甲酚和催化剂铅氧化物而导致严重的环境污染.以对环境温和的液体石蜡作稀释剂,筛选环境友好型催化剂制备癸二酸,开发清洁生产工艺,研究发现,采用氧化铁作催化剂可取得良好的裂解反应效果.最佳工艺条件为:催化剂用量为蓖麻油质量的1.00%,V(稀释剂)∶V(蓖麻油)=4∶1,V(碱液)∶V(蓖麻油)=1∶1,反应温度280℃,反应时间4h.在此条件下,癸二酸收率达67.2%,分离后纯度达到99.0%.表明氧化铁作为催化剂配合液体石蜡作稀释剂可望开发一条蓖麻油裂解制备癸二酸的清洁生产工艺.

  15. 基于AMMI模型对蓖麻杂交种适应性的分析%Adaptability Analysis of Hybrid Castor Based on AMMI Model

    Institute of Scientific and Technical Information of China (English)

    张宝贤; 王光明; 谭德云; 刘红光; 孙丽娟

    2011-01-01

    [目的]分析4个蓖麻杂交种的生产适应性和稳定性,探讨AMMI模型在品种评价中的应用方法。[方法]应用AMMI模型及双标图对4个蓖麻杂交组合2008-2009年多点试验的产量性状进行稳定性分析,进而评价各参试组合的稳定性和适应性。[结果]AMMI模型分析表明,交互作用主成分轴奇异值IPCA1、IPCA2两项共解释了92.24%的互作变异,AMMI模型不仅最大程度地反应互作变异,而且能准确地分析品种的适应能力和稳产性。[结论]AMMI模型把方差分析和主成分分析结合在一起,相对于传统的方差分析方法提高了精确度。甚至能够对自身没有结果能力的雌性系,也可以通过鉴定其F1代的基因和环境的互作效应,间接评价雌性系的适应性。%[Objective] The paper analyzed production adaptability and stability of 4 hybrids of castor,so as to explore the application method of AMMI model in variety evaluation.[Method] AMMI model and biplot were used to carry out stability analysis on 4 castor combinations in multi-point test during 2008 and 2009,and further evaluate the stability and adaptability of various tested combinations.[Result] AMMI model analysis showed that the singular values IPCA1 and IPCA2 in principal component axis of interaction totally explained 92.24% of the interaction variance.AMMI model not only maximizes the reflection on variation of interaction,but also can accurately analyze the adaptability and yield stability of varieties.[Conclusion] AMMI model integrates variance analysis and principal component analysis together,which improves accuracy compared with the traditional method.Even the adaptability of female line without fertility could be indirectly evaluated through the identification on the genotype and environment interaction effects in F1 generation.

  16. Life history of Neoseiulus californicus (McGregor, 1954) (Acari: Phytoseiidae) fed with castor bean (Ricinus communis L.) pollen in laboratory conditions.

    Science.gov (United States)

    Marafeli, P P; Reis, P R; Silveira, E C da; Souza-Pimentel, G C; de Toledo, M A

    2014-08-01

    The predatory mite, Neoseiulus californicus (McGregor, 1954) (Acari: Phytoseiidae) is one of the principal natural enemies of tetranychid mites in several countries, promoting efficient control of those mites in several food and ornamental crops. Pest attacks such as that of the spider mite, Tetranychus urticae Koch, 1836 (Acari: Tetranychidae), is one of the problems faced by farmers, especially in the greenhouse, due to the difficulty of its control with the use of chemicals because of the development of fast resistance making it hard to control it. The objective of this work was to study the life history of the predatory mite N. californicus as a contribution to its mass laboratory rearing, having castor bean plant [Ricinus communis L. (Euphorbiaceae)] pollen as food, for its subsequent use as a natural enemy of T. urticae on a cultivation of greenhouse rosebushes. The studies were carried out in the laboratory, at 25 ± 2°C of temperature, 70 ± 10% RH and a 14 hour photophase. The biological aspects and the fertility life table were appraised. Longevity of 32.9 days was verified for adult females and 40.4 days for males. The intrinsic rate of increase (rm) was 0.2 and the mean generation time (T) was 17.2 days. The population doubled every 4.1 days. The results obtained were similar to those in which the predatory mite N. californicus fed on T. urticae. PMID:25296220

  17. Variation in the oxygen isotope ratio of phloem sap sucrose from castor bean. Evidence in support of the Péclet effect.

    Science.gov (United States)

    Barbour, M M; Schurr, U; Henry, B K; Wong, S C; Farquhar, G D

    2000-06-01

    Theory suggests that the level of enrichment of (18)O above source water in plant organic material (Delta) may provide an integrative indicator of control of water loss. However, there are still gaps in our understanding of the processes affecting Delta. One such gap is the observed discrepancy between modeled enrichment of water at the sites of evaporation within the leaf and measured enrichment of the leaf water as a whole (Delta(L)). Farquhar and Lloyd (1993) suggested that this may be caused by a Péclet effect. It is also unclear whether organic material formed in the leaf reflects enrichment of water at the sites of evaporation within the leaf or Delta(L). To investigate this question castor bean (Ricinus communis L.) leaves, still attached to the plant, were sealed into a controlled-environment gas exchange chamber and subjected to a step change in leaf-to-air vapor pressure difference. Sucrose was collected from a cut on the petiole of the leaf in the chamber under equilibrium conditions and every hour for 6 h after the change in leaf-to-air vapor pressure difference. Oxygen isotope composition of sucrose in the phloem sap (Delta(suc)) reflected modeled Delta(L). A model is presented describing Delta(suc) at isotopic steady state, and accounts for 96% of variation in measured Delta(suc). The data strongly support the Péclet effect theory. PMID:10859197

  18. Castor Plant and Culture%陕西关中地区蓖麻新品种高产栽培技术

    Institute of Scientific and Technical Information of China (English)

    庞宁; 姚学慧; 杨世琦; 孙兆敏

    2005-01-01

    1关中地区蓖麻生产概况 蓖麻(Castor-oil plant)属大戟科经济作物,掌状裂叶,盾状着生,圆锥花序顶生,雌花位于上部,雄花位于下部,雄蕊很多,蒴果具有软刺,种子有种阜,胚乳丰富。蓖麻原产于非洲东部,其栽培历史悠久,为世界十大油料作物之一。世界蓖麻年种植面积在330万hm2,蓖麻籽年产量120万t左右,主要生产国有印度、中国和巴西。我国常年种植面积约27万hm2,

  19. Study on Pyrolyzing Castor Oil Catalytically in Preparing Undecenoic Acid%蓖麻油催化裂解-制十一烯酸研究

    Institute of Scientific and Technical Information of China (English)

    靳福泉

    2001-01-01

    采用减压催化的方式,对蓖麻油直接裂解制备十一烯酸的方法进行了研究。结果表明:使用N型催化剂,在温度400℃,压力23.3 kPa,物料流量700g/h的条件下,十一烯酸收率达24.6%,庚醛18.3%。该法降低了解裂温度,简化了工艺,节省了原料,且催化剂可反复再生使用。%Castor oil was catalytically pyrolyzed for preparing undecenoic acid under reduced pressure. Results showed that the yield of undecenoic acid was up to 24. 6% and that of heptaldehyde to 18.3% in pres ence of N catalyst and at 400℃ and 23.3 kPa pressure, 700 g/h flow rate. In the process, pyrolytic temperature was reduced, the process simplified and the material economized. Moreover, the catalyst can be regenerated.

  20. Effects of ethyl and benzyl groups on the miscibility and properties of castor oil-based polyurethane/starch derivative semi-interpenetrating polymer networks.

    Science.gov (United States)

    Cao, Xiaodong; Wang, Yixiang; Zhang, Lina

    2005-09-16

    Cornstarch derivative (ES), prepared using diethyl sulfate as an etherifying reagent, was blended with castor oil-based polyurethane (PU) prepolymer to obtain a series of semi-interpenetrating polymer network (semi-IPN) materials, named as UES films. Simultaneously, other kinds of semi-IPN (UBS2) were prepared from PU and benzyl starch (BS2) to compare the effects of the substitute groups. The differences in the miscibility and properties of the two series of materials were investigated using attenuated total reflection Fourier transform infrared spectroscopy, atomic force microscopy, dynamic mechanical thermal analysis, ultraviolet-visible spectroscopy, water-sensitivity and tensile testing. The experimental results revealed that UBS2 films exhibit stronger interfacial attraction and better phase mixing than the UES films, as a result of specific interactions between the PU hard segments and BS2 phenyl groups. The optical transmittance, water-resistivity, tensile strength, and elongation at break of the UBS2 films were clearly higher than those of the UES films containing the same concentration of PU. In particular, the miscibility and properties of the UES film with 40 wt.-% ES, were very poor, whereas the semi-IPN films containing 70 wt.-% benzyl starch still had a certain miscibility and good properties. Therefore, the phenyl groups play an important role in the improvement of the miscibility and properties of the semi-IPN materials. PMID:16143996

  1. Concentration, partial characterization, and immobilization of lipase extract from P. brevicompactum by solid-state fermentation of babassu cake and castor bean cake.

    Science.gov (United States)

    Silva, Marceli Fernandes; Freire, Denise M G; de Castro, Aline Machado; Di Luccio, Marco; Mazutti, Marcio A; Oliveira, J Vladimir; Treichel, Helen; de Oliveira, Débora

    2011-07-01

    One relevant limitation hindering the industrial application of microbial lipases has been attributed to their production cost, which is determined by the production yield, enzyme stability among other. The objective of this work was to evaluate the concentration and immobilization of lipase extracts from Penicillium brevicompactum obtained by solid-state fermentation of babassu cake and castor bean cake. The precipitation with ammonium sulfate 60% of saturation of crude extract obtained with babassu cake as raw material showed an enhancement in hydrolytic and esterification activities from 31.82 to 227.57 U/g and from 170.92 to 207.40 U/g, respectively. Concentrated lipase extracts showed preference to medium-chain triglycerides and fatty acids. It is shown that the enzyme activity is maintained during storage at low temperatures (4 and -10°C) for up to 30 days. Higher esterification activities were achieved when the lipase extract was immobilized in sodium alginate and activated coal. PMID:21258873

  2. Biochar prepared from castor oil cake at different temperatures: A voltammetric study applied for Pb(2+), Cd(2+) and Cu(2+) ions preconcentration.

    Science.gov (United States)

    Kalinke, Cristiane; Mangrich, Antonio Sálvio; Marcolino-Junior, Luiz H; Bergamini, Márcio F

    2016-11-15

    Biochar is a carbonaceous material similar produced by pyrolysis of biomass under oxygen-limited conditions. Pyrolysis temperature is an important parameter that can alters biochar characteristics (e.g. surface area, pore size distribution and surface functional groups) and affects it efficacy for adsorption of several probes. In this work, biochar samples have been prepared from castor oil cake using different temperatures of pyrolysis (200-600°C). For the first time, a voltammetric procedure based on carbon paste modified electrode (CPME) was used to investigate the effect of temperature of pyrolysis on the adsorptive characteristics of biochar for Pb(II), Cd(II) and Cu(II) ions. Besides the electrochemical techniques, several characterizations have been performed to evaluate the physicochemical properties of biochar in function of the increase of the pyrolysis temperature. Results suggest that biochar pyrolized at 400°C (BC400) showed a better potential for ions adsorption. The CPME modified with BC400 showed better relative current signal with adsorption affinity: Pb(II)>Cd(II)>Cu(II). Kinetic studies revealed that the pseudo-second order model describes more accurately the adsorption process suggesting that the surface reactions control the adsorption rate. Values found for amount adsorbed were 15.94±0.09; 4.29±0.13 and 2.38±0.39μgg(-1) for Pb(II), Cd(II) and Cu(II) ions, respectively. PMID:27469040

  3. Poliuretanos elastoméricos obtenidos a partir de aceite de ricino y almidón de yuca original y modificado con anhídrido propiónico: síntesis, propiedades fisicoquímicas y fisicomecánicas Polyurethane elastomers from castor oil and chemically modified yucca starch: synthesis and physical-chemical, physical-mechanical and thermical properties

    OpenAIRE

    Manuel F. Valero; Jorge E. Pulido; Álvaro Ramírez; Luz E. Higuita; Sandra M. Arias; Carlos S. Gonzáles; Leonidas J. Ruiz

    2010-01-01

    Chemical modification of cassava starch was conducted through an acylation reaction by using pyridine and propionic anhydride to replace the functional groups of starch. Polyurethane elastomers were prepared using suspensions of the mixture obtained from castor oil and yucca starch that was modified by a propionic anhydride reaction. The suspensions were characterized by means of tests based on The Fourier Transform Infrared Spectroscopy and the Hydroxyl Index. The castor oil-AMP suspensions ...

  4. Adição de torta de mamona em substratos na aclimatação de mudas micropropagadas de bananeira Effect of addition of castor bean pie in substrates in acclimatization of micropropagated banana plantlets

    Directory of Open Access Journals (Sweden)

    Adriana Novais Martins

    2011-03-01

    Full Text Available A utilização de mudas micropropagadas de bananeira que oferecem qualidade genética e fitossanitária, favorecendo o desenvolvimento, instalação e uniformidade do pomar, é importante para a exploração comercial da bananicultura. O objetivo deste trabalho foi avaliar a influência da adição da torta de mamona nos substratos na aclimatação de mudas micropropagadas de bananeira da cv. Willians. O delineamento estatístico utilizado foi o inteiramente casualizado, com 10 tratamentos, sendo 2 substratos e 5 dosagens de torta de mamona (0; 6; 12; 18 e 24 g vaso-1. O substrato Vivatto Slim Plus® possibilitou o melhor desenvolvimento das plantas na aclimatação. Não são recomendadas doses superiores a 12 g planta-1 de torta de mamona misturadas ao substrato na aclimatação de mudas de bananeira.The use of micropropagated banana tree seedlings offer genetic and phytosanitary qualities, favoring the development, installation and uniformity of the yield and it is very important for the commercial exploration of banana fruits. The objective of this study was to evaluate the influence of castor oil plant pie added to the substrate in the acclimatization of micropropagated banana plantlets cv. 'Willians'. It was use the completely randomized, with 10 treatments, being 2 substrates and 5 dosages of castor oil plant pie (0; 6; 12; 18 and 24 g for each recipient. The substrate Vivatto Slim Plus® showed the best development of the plants in acclimatization processes. Dosages above 12 g of castor oil plant pie for each plant are not recommended mixed to the substrate in the acclimatization of banana tree seedlings

  5. 蓖麻油硅氧烷双重交联改善水性聚氨酯的耐水性%Improving Water Resistance of Waterborne Polyurethane by Double Crosslinking Using Castor Oil and 3-Aminopropyltriethoxysilane as Crosslink Agents

    Institute of Scientific and Technical Information of China (English)

    吕建平; 李彬; 张磊; 梁亚平; 冯志媚

    2011-01-01

    Polyester waterborne polyurethane dispersion (WPU) was synthesized with benzoic acid anhydride polyester polyol, dimethylolpropionic acid (DMPA) and 2, 4-diisocyanatotoluene (TDI) as raw materials, respectively. Water resistance of WPU was improved evidently by double crosslink method, which using castor oil and 3-aminopropyltriethoxysilane (KH-550) as crosslink agents. The effects of the amount of castor oil and KH-550 on the properties of the emulsion and cast film were discussed. The results showed that in the process of synthesizing polyester WPU, the suitable amount of castor oil and KH-550 were 1O% and 1% , respectively. After double crosslinking modification, WPU film with good water resistance was obtained, and water absorption of cast film could be decreased from 34.3% to 5.7% . The WPU film could be used as paving materials in sport field.%以苯酐聚酯多元醇、二羟甲基丙酸和甲苯二异氰酸酯为主要原料,选用蓖麻油及3-氨基丙基三乙氧基硅烷(KH-550)为交联剂,通过预聚物的合成和水相扩链两步反应,制备了水性聚氨酯,研究了蓖麻油和KH-550用量对水性聚氨酯力学性能、附着力和吸水率等的影响.结果表明,当蓖麻油质量分数为10%、KH-550质量分数为1%,经过双重交联改性,水性聚氨酯成膜物具有较好耐水性,其吸水率从34.3%下降到5.7%,可以用于体育场地铺装材料.

  6. Effect of emulsion method and co- emulsifier on performance of castor oil emulsion%乳化方式及助乳化剂对蓖麻油乳化液性能的影响

    Institute of Scientific and Technical Information of China (English)

    鲍艳; 吴成兰; 马建中

    2012-01-01

    A blended emulsifier consisting of nonionic surfactant sorbitan mono - fatty acid ester ( Span) and polyoxyethylene sorbitan mono -fatty acid ester (Tween) was applied to emulsify castor oil by three different emulsion methods,constant speed mixing,high shearing and ultrasonic,respectively. The influences of different co - emulsifiers with different chain length such as octanol, ethyl hexanol and dodecanol on stability of the caster oil emulsion were investigated. Results indicated that the stability of castor oil emulsion is improved with the increase of carbon number of the fatty alcohol. The castor oil emulsion prepared via ultrasonic method,both the original emulsion and diluted emulsion, shows good stability.%分别采用恒速搅拌乳化、高剪切乳化及超声波乳化3种方式,以非离子型表面活性剂失水山梨醇单脂肪酸酯(Span)与聚氧乙烯失水山梨醇单脂肪酸酯(Tween)为复合乳化剂对蓖麻油进行乳化,考察了助乳化剂正辛醇、异辛醇、十二醇对乳化体系稳定性的影响.结果表明,随助乳化剂脂肪醇碳链长度的增加,蓖麻油的乳化稳定性提高;采用超声波乳化方式可制得稳定的蓖麻油乳化液,且稀释稳定性良好.

  7. Proposition to use 'in natura' vegetable oil and biodiesel from castor oil in thermal power plants; Proposicao de uso de oleo vegetal in natura e biodiesel de mamona em termeletricas

    Energy Technology Data Exchange (ETDEWEB)

    Soares, B.F.; Tahan, C.M.V.; Pelegrini, M.A.; Polizel, L.H. [Universidade de Sao Paulo (ENERQ/USP), SP (Brazil). Centro de Estudo em Regulacao e Qualidade de Energia; Vandelli, M.V.M. [Termocabo Ltda., Recife, PE (Brazil); Takeno, H.K. [Companhia Energetica de Petrolina (CEP), PE (Brazil)

    2006-07-01

    This paper proposes the adoption of renewable fuels on thermal power plants using diesel or high sulfur fuel oil generator sets. The renewable fuels proposed to partially or fully replace the fossil fuels are castor oil in natura or transesterified (biodiesel). Physical and chemical analyses were carried out on laboratory, establishing the energetic performance of each sample. The results showed that mixtures of bio diesel-fossil fuel offers similar performance when compared to the conventional fuels, allowing its use on thermal power plants in a satisfactory basis. (author)

  8. Producing Process of Sebaconitrile from Sebacic Acid in Castor Oil%蓖麻油制取工程之癸二酸制取癸二腈工艺设计研究

    Institute of Scientific and Technical Information of China (English)

    赵云发; 赵学敬; 苗泽凯

    2015-01-01

    本文针对蓖麻油制取工艺中癸二酸制取癸二腈的制取机理及工艺设计做了理论与实践的研究。通过实践优化了工艺操作的反应温度及相关的操作条件。%Preparation mechanism and technology of sebaconitrile from sebacic acid in castor oil were studied in theory and practice. Operating temperature and conditions were optimized through practice.

  9. Isolation and Identification of Waste Castor-based Oil-highly Efficient Degrading Strains%废弃蓖麻基润滑油高效降解菌的分离与鉴定

    Institute of Scientific and Technical Information of China (English)

    刘亚琼; 王昌禄; 李风娟; 叶峰

    2012-01-01

    M-4 strain which was screened out of the sewage and sludge in a castor oil refinery (Inner Mongolia, China) belongs to Alternaria altemata sp., and was identified by 18S rDNA gene sequence analysis. Degradation test of castor based lubricant base oil showed that after 7 days' work, the degradation rate of M-4 strain analysed with GC was 71.3%. Studies of the growth characteristics of M-4 have shown that, in the case of the same inoculum, M-4 strains grew well in the concentration of 120 g/L waste castor oil-based mineral medium and the caster oil was degraded into the form of sludge. The results showed that M-4 strain can grow well in high content of oil and has remarkable restoration effect on the environment polluted by the castor based lubricants, which indicaties that it will have good prospect in application.%从内蒙古某蓖麻榨油车间排污口取样,经分离,筛选出菌株M-4,通过对该菌株菌落形态及18S rDNA基因扩增序列分析,鉴定为链格孢属.菌株M-4降解废弃蓖麻基润滑油基础油结果表明,降解7d后,采用气相色谱法(GC)进行定量分析,降解率达71.3%.对菌株生长特性研究表明,在相同接种量下,菌株M-4在含废弃蓖麻基润滑油12%的培养基中仍能较好地生长,并将其降解成污泥状,表明菌株M-4能在含油量较高的环境中良好生长,具有研发应用前景.

  10. 磺化蓖麻油应用于无煮茧自动缫丝工艺的研究%Research on Application of Sulfonated Castor Oil in Non-cocoon Cooking Automatic Silk Reeling Technology

    Institute of Scientific and Technical Information of China (English)

    肖海波; 李军生; 阎柳娟; 黄国霞; 邓塔; 韦德科; 徐立勤

    2013-01-01

    This paper conducts a practical reeling test using raw materials with different cocoon qualities based on non-cocoon cooking automatic silk reeling technology and discusses the influence of sulfonated castor oil additive on the performance of silk reeling. The test result shows that sulfonated castor oil additive can improve the reelability percentage of non-cocoon cooking automatic silk reeling technology, reduce the frequency rushing upon cocoons per 10 km averages, decrease the maximum deviation and mean square deviation, improve machine-hour output and cleanness and neatness, thus increasing the overall grade of raw silk by 0. 64 A on average. Sulfonated castor oil non-cocoon cooking automatic silk reeling technology inherits all advantages of non-cocoon cooking automatic silk reeling technology and overcomes the deficiency that non-cocoon cooking technology is inappropriate for raw material cocoon with a poor reelability performance. It is highly feasible to use sulfonated castor oil additive to improve the silk reeling performance of non-cocoon cooking automatic silk reeling technology.%在无煮茧自动缫丝工艺的基础上,采用不同茧质的原料进行实缫试验,探讨了磺化蓖麻油助剂对缫丝成绩的影响.试验结果表明:磺化蓖麻油助剂可提高无煮茧自动缫丝工艺的解舒率,降低万米吊糙次数、减小最大偏差和均方差、增加台时产量、提高清洁和洁净,使生丝的综合等级平均提高了0.64 A.磺化蓖麻油无煮茧自动缫丝工艺继承了无煮茧自动缫丝工艺的全部优点,并克服了无煮茧工艺对解舒成绩较差的原料茧不宜使用的不足,利用磺化蓖麻油助剂来改善无煮茧自动缫丝工艺的缫丝性能具有很大的可行性.

  11. Aluminum and steel adhesion with polyurethanes from castor oil adhesives submitted to gamma irradiation;Estudo da adesividade do aco e aluminio com adesivo de poliuretana derivada de oleo de mamona submetido a radiacao gama

    Energy Technology Data Exchange (ETDEWEB)

    Azevedo, Elaine C.; Assumpcao, Roberto L.; Nascimento, Eduardo M. do, E-mail: elainazeve@utfpr.edu.b [Universidade Tecnologia Federal do Parana (UTFPR), Curitiba, PR (Brazil); Claro Neto, Salvador [Universidade de Sao Paulo (USP), Sao Carlos, SP (Brazil); Soboll, Daniel S. [Universidade Tecnologia Federal do Parana (CPGEI/UTFPR), Curitiba, PR (Brazil). Programa de Pos-Graduacao em Engenharia Eletrica e Informatica Industrial; Lepienski, Carlos M., E-mail: elainazeve@utfpr.edu.b [Universidade Tecnologia Federal do Parana (UTFPR), Curitiba, PR (Brazil)

    2009-07-01

    Polyurethanes adhesive from castor oil is used to join aluminum and steel pieces. The effect of gamma radiation on the resistance to tension tests is investigated. The aluminum and steel pieces after being glued with the adhesive were submitted to gamma irradiation in doses of 1 kGy, 25 kGy and 100 kGy. The rupture strength of the joints after irradiation have a slightly increase or remains practically unchanged indicating that the adhesive properties is not affected by the gamma radiation. (author)

  12. Synthesis and Stabilization of Gold Nanoparticles in Castor Oil [Síntese e Estabilização de Nanopartículas de Ouro em Óleo de Mamona

    Directory of Open Access Journals (Sweden)

    Sara F. A. Morais

    2013-02-01

    Full Text Available In this manuscript we show some examples of the scientific literature about formation of hybrid organic-inorganic colloids based on vegetable oils as stabilizing and dispersing agents of metal nanoparticles (or salts. These systems display a strong Green Chemistry link, since a matrix of vegetable oil-based, being an organic, renewable, and non toxic medium, allows the development of new devices that can be applied in biomedical and environmental areas. We also show some of our main results related to the synthesis of stable colloidal castor oil-based systems containing gold nanoparticles dispersed into them.

  13. Analysis of Trace Inorganic Elements in Castor Oil by Inductively Coupled Plasma Mass Spectrometry%蓖麻油中无机元素的质谱分析

    Institute of Scientific and Technical Information of China (English)

    李坦平; 谢华林; 聂西度

    2015-01-01

    A method for the determination of Na ,Mg ,Si ,P ,K ,Ca ,Cr ,Mn ,Fe ,Co ,Ni ,Cu ,Zn ,As ,Se ,Sr ,Mo ,Cd ,Hg and Pb in castor oil after direct dilution with ethanol by inductively coupled plasma mass spectrometry (ICP‐MS) was estab‐lished .The sample was diluted by ethanol before ICP‐MS determination .The condensation and deposition of high concentrations of carbon in mass cone interface and ion lens ,which will decrease the sensitivity of element analysis ,were avoided effectively by introducing O2 to plasma .The mass spectral interferences were eliminated by octopole reaction system (ORS) .The matrix effects were calibrated to using Sc ,Ge ,Rh and Ir as internal standard elements .Au standard solution ,which could form amal‐gam alloy with Hg ,was dropped to eliminate the memory effect of Hg .The results show that the correlation coefficient for ana‐lyte is no less than 0.999 5 ,the detection limits is in the range of 0.06~20.1 ng・L -1 ,the recovery is in the range of 990.4%~110.2% ,and the RSD is less than 4.8% .This method was very fast ,simple and accurate to simultaneously analyze multi‐ele‐ments in castor oil .%建立了乙醇稀释‐电感耦合等离子体质谱(IC P‐M S )法测定蓖麻油中多个无机微量元素的分析方法。蓖麻油样品用乙醇稀释,使用IC P‐M S法直接测定。在等离子体氩气流中加入少量氧气,使高浓度有机溶液进入等离子体中完全燃烧,防止了高碳在质谱锥口和离子透镜上的冷凝沉积,采用八极杆碰撞/反应池(ORS)消除了质谱干扰,多元素(Sc ,Ge ,Rh ,Ir)内标溶液的使用消除了基体效应,维持了各元素分析信号的稳定,通过向待测溶液中加入A u标准溶液,使元素 H g形成金汞齐消除了记忆效应。20个待测元素的线性相关系数≥0.9995,检出限在0.06~20.1 ng・ L -1之间,回收率为90.4%~110.2%,相对标准偏差(RSD )≤4.8%。通过对不同

  14. Substrate-Driven Convergence of the Microbial Community in Lignocellulose-Amended Enrichments of Gut Microflora from the Canadian Beaver (Castor canadensis) and North American Moose (Alces americanus).

    Science.gov (United States)

    Wong, Mabel T; Wang, Weijun; Lacourt, Michael; Couturier, Marie; Edwards, Elizabeth A; Master, Emma R

    2016-01-01

    Strategic enrichment of microcosms derived from wood foragers can facilitate the discovery of key microbes that produce enzymes for the bioconversion of plant fiber (i.e., lignocellulose) into valuable chemicals and energy. In this study, lignocellulose-degrading microorganisms from the digestive systems of Canadian beaver (Castor canadensis) and North American moose (Alces americanus) were enriched under methanogenic conditions for over 3 years using various wood-derived substrates, including (i) cellulose (C), (ii) cellulose + lignosulphonate (CL), (iii) cellulose + tannic acid (CT), and (iv) poplar hydrolysate (PH). Substantial improvement in the conversion of amended organic substrates into biogas was observed in both beaver dropping and moose rumen enrichment cultures over the enrichment phases (up to 0.36-0.68 ml biogas/mg COD added), except for enrichments amended with tannic acid where conversion was approximately 0.15 ml biogas/mg COD added. Multiplex-pyrosequencing of 16S rRNA genes revealed systematic shifts in the population of Firmicutes, Bacteroidetes, Chlorobi, Spirochaetes, Chloroflexi, and Elusimicrobia in response to the enrichment. These shifts were predominantly substrate driven, not inoculum driven, as revealed by both UPGMA clustering pattern and OTU distribution. Additionally, the relative abundance of multiple OTUs from poorly defined taxonomic lineages increased from less than 1% to 25-50% in microcosms amended with lignocellulosic substrates, including OTUs from classes SJA-28, Endomicrobia, orders Bacteroidales, OPB54, and family Lachnospiraceae. This study provides the first direct comparison of shifts in microbial communities that occurred in different environmental samples in response to multiple relevant lignocellulosic carbon sources, and demonstrates the potential of enrichment to increase the abundance of key lignocellulolytic microorganisms and encoded activities. PMID:27446004

  15. Characterization of a pollen-specific and desiccation-associated AP2/ERF type transcription factor gene from castor bean (Ricinus communis L.

    Directory of Open Access Journals (Sweden)

    Thaís de Moura Cipriano

    2013-09-01

    Full Text Available DREB transcription factors (TF belong to the superfamily of AP2/ERF and their involvement in protein-protein interactions and DNA binding has been proposed. AP2/ERF proteins have important functions in the transcriptional regulation of a variety of biological processes related to growth and development, as well as various responses to environmental stimuli, regulating expression of plant biotic and abiotic stress-responsive genes. In this study an AP2/ERF TF gene (named RcDREB1 was isolated from castor bean (Ricinus communis L. and its expression was analyzed in developing seeds, leaves, ovules, stems and petals of plants cultivated under field conditions. Transcripts were only observed in pollen grains, peaking during anthesis. The RcDREB1 deduced amino acid sequence was compared to other AP2/ERF TF proteins and presented 38-78% identity. Phylogenetic analysis classified it as a member of the CBF/DREB subfamily, rooting with the subgroup A-5. The RcDREB1 promoter was fused to the gus reporter gene and used to transform tobacco. Transgenic plants were exposed to various abiotic stress treatments (low and high tempera- tures, drought, salinity and exogenous ABA and no detectable GUS expression was observed, suggesting that the RcDREB1 promoter is not active under tested conditions. In silico analyses revealed the presence of three copies of the regulatory late pollen-specific element (AGAAA in the RcDREB1 5 ́-region. Interestingly, GUS expression was only observed in pollen grains, starting when the flower opened and initiating the senescence process; at this point, desiccated mature pollen grains are released from anthers. In addition, dehydrated developing pollen grains also expressed the gus gene. This is the first study on a DREB gene presenting pollen-specific expression.

  16. Substrate-Driven Convergence of the Microbial Community in Lignocellulose-Amended Enrichments of Gut Microflora from the Canadian Beaver (Castor canadensis) and North American Moose (Alces americanus)

    Science.gov (United States)

    Wong, Mabel T.; Wang, Weijun; Lacourt, Michael; Couturier, Marie; Edwards, Elizabeth A.; Master, Emma R.

    2016-01-01

    Strategic enrichment of microcosms derived from wood foragers can facilitate the discovery of key microbes that produce enzymes for the bioconversion of plant fiber (i.e., lignocellulose) into valuable chemicals and energy. In this study, lignocellulose-degrading microorganisms from the digestive systems of Canadian beaver (Castor canadensis) and North American moose (Alces americanus) were enriched under methanogenic conditions for over 3 years using various wood-derived substrates, including (i) cellulose (C), (ii) cellulose + lignosulphonate (CL), (iii) cellulose + tannic acid (CT), and (iv) poplar hydrolysate (PH). Substantial improvement in the conversion of amended organic substrates into biogas was observed in both beaver dropping and moose rumen enrichment cultures over the enrichment phases (up to 0.36–0.68 ml biogas/mg COD added), except for enrichments amended with tannic acid where conversion was approximately 0.15 ml biogas/mg COD added. Multiplex-pyrosequencing of 16S rRNA genes revealed systematic shifts in the population of Firmicutes, Bacteroidetes, Chlorobi, Spirochaetes, Chloroflexi, and Elusimicrobia in response to the enrichment. These shifts were predominantly substrate driven, not inoculum driven, as revealed by both UPGMA clustering pattern and OTU distribution. Additionally, the relative abundance of multiple OTUs from poorly defined taxonomic lineages increased from less than 1% to 25–50% in microcosms amended with lignocellulosic substrates, including OTUs from classes SJA-28, Endomicrobia, orders Bacteroidales, OPB54, and family Lachnospiraceae. This study provides the first direct comparison of shifts in microbial communities that occurred in different environmental samples in response to multiple relevant lignocellulosic carbon sources, and demonstrates the potential of enrichment to increase the abundance of key lignocellulolytic microorganisms and encoded activities.

  17. 固体酸催化蓖麻油制备生物柴油%Preparation of biodiesel from castor seed oil using solid acid as a catalyst

    Institute of Scientific and Technical Information of China (English)

    靳福全; 牛宇岚; 李晓红

    2011-01-01

    以一水硫酸氢钠固体酸为催化剂,对蓖麻油酯交换制备生物柴油进行了研究.在反应温度为75℃条件下,考察了醇油摩尔比、催化剂用量(占油质量)及反应时间对酯交换反应的影响.在反应温度为75℃、醇油摩尔比为9:1、催化剂用量为4%、反应时间为8 h的优化工艺条件下,平均甘油收率达93%,产物中甲酯总含量为95.20%.甲酯和甘油静置分层快,后处理简单,对环境无污染.%The transesterification of castor seed oil to produce biodiesel catalyzed by solid acid sodium bisulfate monohydrate was studied. At the temperature of 75 ℃, effects of molar ratio of methanol to oil, catalyst dosage ( mass ratio of catalyst to oil) and reaction time on the transesterification were investigated. Under the optimal conditions of reaction temperature 75 ℃, molar ratio of methanol to oil 9: 1, catalyst dosage 4% and reaction time 8 h, the average yield of glycerine arrived 93% . The products were analyzed by GC - MS and the mass fraction of methyl ester was 95.20%. The methyl ester and the glycerine were easily separated, and the method had no pollution to the environment.

  18. Cytoxicity, dynamic and thermal properties of bio-based rosin-epoxy resin/ castor oil polyurethane/ carbon nanotubes bio-nanocomposites.

    Science.gov (United States)

    Huo, Li; Wang, Dan; Liu, Hongmei; Jia, Pan; Gao, Jungang

    2016-08-01

    In order to prepare bio-nanocomposites with no-cytotoxicity, the rosin-based epoxy resin (MPAER) and castor oil-based polyurethane (COPU) were synthesized and carbon nanotubes (CNTs) was used to enhance the properties of curing MPAER/COPU materials. The curing reaction, dynamic mechanical and thermal properties of this system were characterized by FTIR, NMR, DMA, TG et al. The cytotoxicity of materials is evaluated for HeLa cells using a MTT cell-viability assay. The results showed that COPU can cure MPAER and CNTs can increase effectively the properties of MPAER/COPU nanocomposites. The Tg of MPAER/COPU/CNTs has the highest value when CNTs content is 0.4 wt%, which is 52.4 °C higher than the pure MPAER/COPU. Thermal stability of the nanocomposites is enhanced by the addition of CNTs, the initial decomposition temperature Td5 of the sample No. 0.4 has increased from 284.5 to 305.2 °C, which is 20.7 °C higher than No. 0. The impact strength of the No. 0.4 film is 15 kg cm higher than the pure resin system. The survival rate of HeLa cells to the products is greater than 90% within 48 and 72 h, which demonstrate that this material has excellent biocompatibility and no obvious cytotoxicity for HeLa cells, which may be used in the medical treatment. PMID:27117086

  19. Substrate-driven convergence of the microbial community in lignocellulose-amended enrichments of gut microflora from the Canadian beaver (Castor canadensis and North American moose (Alces americanus

    Directory of Open Access Journals (Sweden)

    Mabel Ting eWong

    2016-06-01

    Full Text Available Strategic enrichment of microcosms derived from wood foragers can facilitate the discovery of key microbes that produce enzymes for the bioconversion of plant fibre (i.e. lignocellulose into valuable chemicals and energy. In this study, lignocellulose-degrading microorganisms from the digestive systems of Canadian beaver (Castor canadensis and North American moose (Alces americanus were enriched under methanogenic conditions for over three years using various wood-derived substrates, including i cellulose (C, ii cellulose + lignosulphonate (CL, iii cellulose + tannic acid (CT, and iv poplar hydrolysate (PH. Substantial improvement in the conversion of amended organic substrates to biogas was observed in both beaver dropping and moose rumen enrichment cultures over the enrichment phases (up to 0.36 to 0.68 ml biogas/ mg COD added, except for enrichments amended with tannic acid where conversion was only about 0.15 ml biogas/ mg COD added. Multiplex-pyrosequencing of 16S rRNA genes revealed systematic shifts in the population of Firmicutes, Bacteroidetes, Chlorobi, Spirochaetes, Chloroflexi and Elusimicrobia in response to the enrichment. These shifts were predominantly substrate-driven, not inoculum driven, as revealed by both UPGMA clustering pattern and OTU distribution. Additionally, the relative abundance of multiple OTUs from poorly-defined taxonomic lineages increased from less than 1% to 25-50% in microcosms amended with lignocellulosic substrates, including OTUs from classes SJA-28, Endomicrobia, orders Bacteroidales, OPB54 and family Lachnospiraceae. This study provides the first direct comparison of shifts in microbial communities that occurred in different environmental samples in response to multiple relevant lignocellulosic carbon sources, and demonstrates the potential of enrichment to increase the abundance of key lignocellulolytic microorganisms and encoded activities.

  20. [Succession caused by beaver (Castor fiber L.) life activity: I. What is learnt from the calibration of a simple Markov model].

    Science.gov (United States)

    2014-01-01

    A homogeneous Markov chain of three aggregated states "pond--swamp--wood" is proposed as a model of cyclic zoogenic successions caused by beaver (Castor fiber L.) life activity in a forest biogeocoenosis. To calibrate the chain transition matrix, the data have appeared sufficient that were gained from field studies undertaken in "Bryanskii Les" Reserve in the years of 2002-2008. Major outcomes of the calibrated model ensue from the formulae of finite homogeneous Markov chain theory: the stationary probability distribution of states, thematrix (T) of mean first passage times, and the mean durations (M(j)) of succession stages. The former illustrates the distribution of relative areas under succession stages if the current trends and transition rates of succession are conserved in the long-term--it has appeared close to the observed distribution. Matrix T provides for quantitative characteristics of the cyclic process, specifying the ranges the experts proposed for the duration of stages in the conceptual scheme of succession. The calculated values of M(j) detect potential discrepancies between empirical data, the expert knowledge that summarizes the data, and the postulates accepted in the mathematical model. The calculated M2 value falls outside the expert range, which gives a reason to doubt the validity of expert estimation proposed, the aggregation mode chosen for chain states, or/and the accuracy-of data available, i.e., to draw certain "lessons" from partially successful calibration. Refusal to postulate the time homogeneity or the Markov property of the chain is also discussed among possible ways to improve the model. PMID:25509040

  1. COBRA-SFS [Spent-Fuel Storage] thermal-hydraulic analyses of the CASTOR-1C and REA 2023 BWR storage casks containing consolidated spent fuel

    International Nuclear Information System (INIS)

    Consolidation of spent nuclear fuel rods is being considered as one option for more efficient and compact storage of reactor spent fuel assemblies. In this concept, rods from two disassembled spent fuel assemblies will be consolidated in a space originally intended to store a single unconsolidated assembly. The thermal performance of consolidated fuel rods in dry storage, especially in multiassembly storage systems, is one of the major issues that must be addressed prior to implementation. In this study, Pacific Northwest Laboratory researchers performed thermal-hydraulic analyses for both the REA 2023 cask and the CASTOR-1C cask containing either unconsolidated or consolidated BWR spent fuel assemblies. The objective was to determine the effect of consolidating spent fuel assemblies on the temperature distributions within both types of casks. Two major conclusions resulted from this study. First, a lumping technique (combining rods and flow channels), which reduces the number of computational nodes required to model complex multiassembly geometries, could be used for both unconsolidated and consolidated rods with negligible effect on prediction accuracies. Second, with a relatively high thermal conductivity backfill gas (e.g., helium), the predicted peak fuel rod temperature in a canister of consolidated rods generating the same amount of heat as an unconsolidated assembly is essentially the same as the peak temperature in the unconsolidated assembly. In contrast, with a relatively low thermal conductivity backfill gas (e.g., nitrogen), the opposite is true and the predicted peak temperature in a consolidated canister is significantly higher than in an unconsolidated assembly. Therefore, when rods are consolidated, selection of the backfill gas is important in maintaining peak rod temperatures below allowable values for rods with relatively high decay heat generation rates

  2. Boron affects the growth and ultrastructure of castor bean plants Boro afeta o crescimento e a ultra-estrutura da mamoneira

    Directory of Open Access Journals (Sweden)

    Denis Herisson da Silva

    2008-12-01

    Full Text Available The cultivation of oleaginous plants like the castor bean guarantees employment for agricultural families and can contribute in energy and chemical sectors, especially in the northeastern semi-arid regions of Brazil. Boron (B deficiency is a widespread nutritional disorder despite the fact that various anthropogenic sources with high B content may increase soil B to toxic levels for plants. The present study was designed to investigate the ultrastructural effects of boron deficiency and toxicity on castor bean plants which were grown under greenhouse condition using plastic containers with 10 L of nutrient solution. Boron treatments comprised: control (no B; 0.27 mg L-1, 5.40 mg L-1 B pots (one plant per pot, tested in a completely randomized design with three replicates. The dry matter of all plant parts and B concentration were determined. Cellular ultrastructure was evaluated by transmission and scanning electron microscopy on samples of leaves and petioles. Dry matter yield was affected by the B absence treatment but there was no difference for the 5.4 mg L-1 B (toxic conditions treatment. A marginal leaf burn at edge and tips of oldest leaves and absence of starch granules in chloroplasts were noted for the B toxicity treatment. The deformation of the youngest leaves, the death of the apical meristem as well as the swelling of the middle lamella, absence of starch granules in chloroplasts and petiole vessels untidily were observed in the B absent treatment. It is concluded that the production and development of castor bean plants is affected by boron deficiency, but not for boron toxicity conditions.A mamoneira é uma oleaginosa com grande potencial para a geração de renda na agricultura familiar e para produção de matéria prima para a indústria química e setor energético brasileiro, especialmente em regiões do semi-árido nordestino. A deficiência de boro (B ocorre de forma generalizada no Brasil e a aplicação excessiva deste

  3. 紫外分光光度法测定蓖麻籽饼中蓖麻碱的含量%Quantity Determination of Ricinine in Castor Pomace by Ultroviolet Spectrometry Method

    Institute of Scientific and Technical Information of China (English)

    徐文清; 陈艾; 庄湘莲; 李美佳

    2001-01-01

    [Objective]Quantification of ricinine in castor pomac e.[method]To determine absorbance of ricinine at 313 nm by UV-300[Result]Se ven samples was determined,the result indicate that the quantity of ricinine in castor pomace which treated by reducing poison is lower than those which wasnt treaed by reducing poison,the rate of recovery of ricinine is 94.31%,RSD is 1 .18%(n=5)[Conclusion]The method that quantity determinetion of ricinine in c astor pomace by Ultroviolet spetrometry is simple,accurate,stability and good re coverty.%测定蓖麻籽饼中蓖麻碱的含量。用紫外分光光度计,在313 nm处测定蓖麻碱的吸光度。测定了七种样品,结果表明减毒之后蓖麻碱含量明显降低,回收率实验表明,蓖麻碱回收率为94.31%,RSD为1.18%。紫外分光光度法测定蓖麻碱的含量具有简便、准确、稳定、重现性好的特点。

  4. Preparation of triglyceride polybasic carboxylic acid by ozonolysis of castor oil%臭氧氧化蓖麻油制备甘油三酸酯多元酸的研究

    Institute of Scientific and Technical Information of China (English)

    艾买提江·萨伍提; 吾满江·艾力; 司马义·努尔拉

    2009-01-01

    以蓖麻油为原料,经臭氧氧化法制备甘油三酸酯多元酸.考察了溶剂、臭氧化反应温度及时间,氧化裂解温度及时间对反应的影响.实验结果表明,合成甘油三酸酯多元酸的最佳条件为:m(蓖麻油):m(乙酸) 为1:4,臭氧化反应温度10~15 ℃,时间2 h;氧化裂解温度90~95 ℃,时间2.5 h.在此条件下收率达83%以上.%The preparation of triglyceride polybasic carboxylic acid by ozonolysis reaction from castor oil was studied.The effects of reaction factors such as solvent,reaction time and temperature of ozonolysis,reaction time and temperature of oxygenolysis were discussed.The results showed that the optimum conditions of synthesizing polybasic carboxylic acid were as follows:mass ratio of castor oil to 10-15 ℃,oxygenolysis time 2.5 h and oxygenolysis temperature 90-95 ℃.The yield was over 83% under the optimum conditions.

  5. Research on the recovery of phenol and alkali in the products of castor oil cracking%蓖麻油碱裂解液中酚及碱的回收方法研究

    Institute of Scientific and Technical Information of China (English)

    王文举; 赵晓波; 张哲宇

    2011-01-01

    采用气相色谱-质谱联用仪分析了蓖麻油碱裂解料液的化学组成,研究了溶剂种类、用量对碱裂解料中苯酚和NaOH浸出性能的影响.结果表明:甲醇-叔丁醇混合溶剂(体积比为1∶1)对苯酚和NaOH的浸出具有高选择性;当溶剂用量为6 mL/g时,苯酚回收率可达80%,NaOH回收率可达72%.%The chemical compositions of the products of castor oil cracking were analyzed by gas chromatography-mass spectrometry and then the effect of solvents and its volume on the leaching performance of phenol and sodium hydroxide in the products of castor oil cracking were studied. The results show that methanol-tert-butanol(V(methanol) : V(butanol)= 1: 1) mixed solvents exhibit high leaching selectivity towards phenol and sodium hydroxide. When the solvent dosage is 6 mL/g, the recovery of phenol and sodium hydroxide can be up to 80% and 72% ,respectively.

  6. Catalytic Conversion of Castor Oil to Biodiesel Using Ionic Liquid as Catalyst%碱性离子液体在制备生物柴油中的应用

    Institute of Scientific and Technical Information of China (English)

    马洁; 顾俊; 夏晓莉; 倪邦庆; 王海军

    2012-01-01

    Efficient catalytic conversion of castor oil to biodiesel,is achieved using 1-buthyl-3-methylimidazolium hydroxide(OH) as the catalyst.The influence factors,such as alcohol-oil ratio,catalyst dosage,reaction temperature,reaction time are investigated in detail.The results showed that OH was an efficient catalyst for catalytic conversion of castor oil to biodiesel,and 82.3 % yield of HMF was obtained for 90 min at 50 ℃ in the presence of the load of catalyst was 8 % and the CH3OH: oil ratio was 9∶1.%文章研究了碱性离子液体1-丁基-3-甲基咪唑氢氧盐([Bmim]OH)催化蓖麻油酯交换制备生物柴油的工艺。考察了醇油比、催化剂用量、反应温度、反应时间等因素对脂肪酸甲酯的得率的影响。研究表明以[Bmim]OH为催化剂,脂肪酸甲酯得率达到82.3%。最佳反应条件为:醇油摩尔比9∶1,催化剂用量8%,反应温度50℃,反应时间90 min。

  7. Fitting Time Functions of Castor Oil Viscous Coefficient by Origin%Origin软件在拟合蓖麻油黏滞系数随温度变化关系曲线中的应用

    Institute of Scientific and Technical Information of China (English)

    金叶; 彭川黔; 梁霄; 张锋; 冯文林; 蒲利春

    2012-01-01

    蓖麻油在不同温度下的黏度系数差别很大,国际公认的标准值只有几个特定温度下的数值,这给实际应用及实验测量结果的比较带来了较大的困难。根据不同温度获得的实验数据,借助于Origin软件,利用曲线拟合方法得出了蓖麻油的黏滞系数随温度变化的函数曲线及相应的经验方程,计算值与实验值符合较好。%The viscosity coefficient of Castor oil is various under different temperature.Under internationally recognized standard,there are only a few values,which is not propitious for application.This paper shows a new method to fit viscosity coefficient of Castor oil with various temperature by Origin.

  8. Effect of the available soil water and organic matter on the castor bean foliar area growth; Influencia da agua disponivel e materia organica no crescimento da area foliar da mamoneira

    Energy Technology Data Exchange (ETDEWEB)

    Lacerda, Rogerio D. de; Almeida, Larissa C.; Guerra, Hugo O. Carvalho; Souza, Cristiana M. de; Batista, Faed R. [Universidade Federal de Campina Grande (UFCG), PB (Brazil)], Emails: rogerio_dl@yahoo.com.br, laris_almeida@yahoo.com.br, hugo_carvallo@hotmail.com, crismsouza@hotmail.com, faedrideiro@hotmail.com

    2010-07-01

    The Brazilian potential for bio fuel production through the cultivation of oil seeds is immeasurable. On the Northeast is possible to cultivate the castor bean, peanuts, sesame, babassu and other species. Just for the castor bean there exist 3.0 millions of hectares able for cultivation. The experiment had as objective to study the effect of available soil water for plants and organic matter on the foliar area production. It was conducted on the field during the period of October 2008 to March 2009 using an experimental design 2 x 4 factorial on a randomized-complete block design, constituted of two soil organic matter contents (5.0 g.kg{sup -1} and 25.0 g.kg{sup -1}) and four soil water contents (100, 90, 80 and 70% of the soil available water for the plants) with 3 replicates. On each 100 m{sup 2} parcel 50 plants were cultivated until 180 days after the sowing, DAS. The analyses of variance allowed to observe that the addition of organic matter increased the foliar areas in 20,7% and the available water produced an increment of 51,5% when were elevated from 70 to 100%. (author)

  9. Biologia comparada de Spodoptera cosmioides (Walk. (Lepidoptera: Noctuidae em cebola, mamona, soja e feijão Compared biology of Spodoptera cosmioides (Walk. (Lepidoptera: Noctuidae in onion, castor oil plant, soybean and bean

    Directory of Open Access Journals (Sweden)

    Alvimar Bavaresco

    2003-12-01

    Full Text Available Estudou-se a biologia de Spodoptera cosmioides (Walk. sobre quatro hospedeiros naturais (folhas de cebola, mamona, soja cv. Embrapa 48 e feijão cv. Carioca. Foram avaliados a duração e viabilidade das fases imaturas e do ciclo total, número de ínstares, peso de pupas, razão sexual, porcentagem de deformação de adultos e de adultos não liberados dos invólucros pupais, longevidade de adultos, fecundidade e viabilidade de ovos. Observou-se menor duração e maior viabilidade do período ovo-adulto para mamona e cebola (39,7 dias e 21,7% e 40,5 dias e 21,8%, respectivamente, do que para soja (46,0 dias e 3,9%. O peso pupal foi de 444,6 mg em cebola, 420,0 em feijão, 396,6 em mamona e 298,7 em soja. Constatou-se um predomínio de seis ínstares larvais em folhas de cebola e mamona, ocorrendo também sete para alguns indivíduos, enquanto que em soja predominou a ocorrência de sete, também verificando oito ínstares, indicando uma menor adequação nutricional deste hospedeiro. As fêmeas apresentaram duração da fase pupal significativamente menor do que os machos em todos hospedeiros, fazendo com que a emergência do adulto ocorresse antes dos machos. Em cebola, a longevidade de adultos foi significativamente superior aos demais hospedeiros. A fecundidade foi maior em cebola e mamona (3224 e 3206 ovos/fêmea, respectivamente, enquanto que para soja observou-se 1353 ovos/fêmea. Em folhas de feijão, o desenvolvimento do inseto foi prejudicado por caracteres morfológicos - pilosidade, que promoveram elevada mortalidade na fase larval.The biology of Spodoptera cosmioides (Walk. was studied on four natural hosts (onion leaves, castor oil plant, soy cv. Embrapa 48 and bean cv. Carioca. The duration and viability of immature phases and total cycle, instar number, pupals weight, sexual ratio, percentage of deformed adults and adults not released of pupal beg, adults' longevity, fecundity and eggs viability were evaluated. It was observed in

  10. Synthesis & Property of Siloxane-endcapped Castor Oil-modified Polyurethane%硅烷封端蓖麻油改性聚氨酯预聚物合成及性能研究

    Institute of Scientific and Technical Information of China (English)

    游胜勇; 陈衍华; 邹怀华; 詹媖

    2013-01-01

    The isocyanate endcapped castor oil-modified polyurethane prepolymer was synthesized with renewable castor oil,polyether polyols,and toluene diisocyanate (TDI) as the starting material.The obtained isocyanate capped polyurethane prepolymer was reacted with 3-aminopropyltriethoxysilane to produce siloxaneendcapped castor oil modified polyurethane prepolymer.IR was used for the analysis of the structure of materials,and TGA was used for the thermal property.The mechanical properties of the film were also tested.Results indicated that the proper temperature of siloxane-endcapped castor oil-modified polyurethane and KH 550 was 70℃,the reaction time was 4 h; as the curing temperature was increased,the tack-free time of the polyurethane film was decreased.When the curing temperature exceeded 30℃,the downtrend tends to be smooth.The film kept stable before 230℃,its tensile strength reached to 11.6 MPa with an elongation of 460%.Compared with castor oil-modified prepolymer,its elongation improved by 37.8% and 22.1%,respectively.%以可再生的蓖麻油、聚酯多元醇、甲苯二异氰酸酯为原料,合成出异氰酸酯基封端蓖麻油改性聚氨酯预聚体;再与γ-氨丙基三乙氧基硅烷(KH 550)反应,制备出硅烷封端蓖麻油改性聚氨酯预聚物.采用红外光谱对预聚体结构进行了定性分析,采用热失重对成膜物进行热性能分析,并测试了成膜物的力学性能.结果表明,异氰酸酯基封端蓖麻油改性聚氨酯与KH 550的较佳反应温度为70℃,反应时间为4h;随固化温度的增加,硅烷封端蓖麻油改性聚氨酯胶膜的表干时间缩短,固化温度大于30℃后下降趋势趋于平坦;固化膜能在230℃前保持稳定,其拉伸强度达到11.6 MPa、拉断伸长率为460%,与蓖麻油改性聚氨酯相比分别提高37.8%、22.1%.

  11. Semeadura do híbrido Lyra de mamona (Ricinus communis L. sob plantio direto Seeding of castor bean (Ricinus communis L. hybrid Lyra in no-tillage system

    Directory of Open Access Journals (Sweden)

    Nilza Patrícia Ramos

    2008-04-01

    Full Text Available A semeadura mecanizada da mamona (Ricinus communis L. pode reduzir o tempo de operação e os custos associados à mão-de-obra, porém a escassez de informações nesta área tem prejudicado a adoção correta desta tecnologia. Assim, objetivou-se com esse trabalho verificar a regularidade da distribuição longitudinal de sementes do híbrido Lyra de mamona, em área de plantio direto e sua relação com rendimento de grãos; bem como a viabilidade da aplicação de cartas de controle para a avaliação do processo de semeadura, nesta cultura. O ensaio foi conduzido em área comercial de produção de grãos de mamona sob plantio direto, sendo avaliadas: distribuição longitudinal, porcentagens de espaçamentos normais, falhos e duplos na linha, número de planta por metro linear, altura de plantas, altura e comprimento do racemo primário e rendimento de grãos. Utilizou-se a estatística descritiva, a análise de correlações e as cartas de controle para a avaliação dos parâmetros propostos. Há necessidade de refinamento nas regulagens de semeadoras-adubadoras de precisão para a semeadura do híbrido Lyra de mamona, em áreas de plantio direto; a distribuição longitudinal de sementes de mamona influencia vários parâmetros fitotécnicos, incluindo o rendimento de grãos; a aplicação da carta de controle é uma ferramenta eficiente para a avaliação do processo de semeadura da mamona.The mechanized sowing of castor bean (Ricinus communis L. can reduce the operation time and the costs associated to labor, however the privation of information in this area have damaged the correct adoption of this technology. Thus, the research had as an aim to verify the regularity of longitudinal distribution of hybrid Lyra castor bean seeds, in a no-tillage system area, and its relationship with yield; and the viability of control charts for evaluation of sowing in this crop. The essay was carded out in a commercial area of grain production in no

  12. Waterborne polyurethane adhesive modified by castor oil and silane%蓖麻油/硅烷双重改性水性聚氨酯黏合剂

    Institute of Scientific and Technical Information of China (English)

    段启勇; 潘飞; 曾县明; 朱守玉; 吕建平

    2011-01-01

    With polyether diol (N220 and N240) and isophorone diisocyanate (IPDI) as main raw materials,dimethylolpropionic acid (DMPA) as hydrophilic chain extender, trihydroxylmethylpropane (TMP), castor oil (CO)and organic silane(KH-550) as cross linkers, a waterborne polyurethane (WPU) adhesive modified by CO/KH-550 was synthesized.The influences of some factors such as the mass ratio of m(N220)∶m(N240),CO and KH-550 contents on the properties of WPU adhesive and its pigment printing fabric were discussed.The results showed that the WPU adhesive modified by CO/KH-550 had better water resistance,the rubbing fastness and soaping fastness of fabric with CO/KH-550 modified WPU as adhesive of pigment printing were obviously higher than those with unmodified WPU as adhesive of pigment printing,and the former fabric was more soft when R value(namely molar ratio of-NCO to -OH) was l.4,the mass fractions of CO and KH-550 were 5% and 4% respectively,the mass ratio of m(N220)∶m(N240) was 2∶1.%以聚醚二元醇(N220和N240)和异佛尔酮二异氰酸酯(IPDI)为主要原料,二羟甲基丙酸(DMPA)为亲水扩链剂,三羟甲基丙烷(TMP)、蓖麻油(CO)和有机硅烷(KH-550)为交联剂,合成了CO/KH-550双重改性WPU(水性聚氨酯)黏合剂.探讨了m(N220)∶m(N240)比例、CO和KH-550用量对WPU黏合剂及其涂料印花织物性能的影响.结果表明:当R=n(-NCO)/n(-OH)=1.4、w(CO)=5%、m(N220):m(N240)=2∶1和w(KH-550)=4%时,CO/KH-550双重改性WPU黏合剂的耐水性较好,其涂料印花织物的摩擦牢度及皂洗牢度均明显高于未改性WPU,并且织物手感较柔软.

  13. Estratégias de irrigação com água salina na mamoneira Irrigation strategies with saline water in castor oil plant

    Directory of Open Access Journals (Sweden)

    Maria Eugênia da Costa

    2013-03-01

    Full Text Available Este experimento foi realizado em campo para avaliar estratégias de irrigação com água salina no crescimento e na produção da mamoneira (BRS Energia, além de identificar eventuais estádios de maior tolerância à salinidade e monitorar alguns atributos químicos do solo. Os tratamentos consistiram da irrigação com águas de CE 0,53; 2,09; 3,66 dS m-1 de acordo com a fase de desenvolvimento da cultura, totalizando cinco estratégias de irrigação com água salina e uma testemunha. As avaliações de crescimento foram realizadas aos 20; 40; 60; 80; 100 dias após a semeadura (DAS. As coletas de solo foram realizadas concomitantemente às avaliações de crescimento, nas camadas 0-0,10; 0,10-0,30; 0,30-0,50 m. A irrigação contínua com água de CE 3,66 dS m-1 reduziu a altura de planta, o comprimento de racemo terciário, o número de frutos por área útil e a produtividade de frutos. Essa estratégia aumentou acentuadamente os teores de Na+ e a CE do solo no final do ciclo. Por outro lado, a irrigação com água salina começando aos 45 DAS não prejudicou as variáveis de crescimento e os componentes de produção. Essa estratégia minimizou os impactos negativos sobre a salinidade/sodicidade do solo no final do ciclo. Comportamento similar foi observado para a irrigação contínua com água de CE 2,09 dS m-1 (mistura de águas com CE de 0,53 e 3,66 dS m-1. A mamoneira não apresentou tolerância diferenciada à salinidade em função da fase de desenvolvimento, embora tenha sido prejudicada quando aumentaram a intensidade e a duração do estresse salino.This experiment was conducted under field conditions to evaluate irrigation strategies with saline water on growth and production of castor oil plant (cv. BRS Energia, identify eventual stages with higher tolerance to salinity and monitor some soil chemical attributes. The treatments consisted of irrigations with water of EC 0.53; 2.09; 3.66 dS m-1 according to the development

  14. Influência da colheita e períodos de armazenamento na qualidade sanitária de sementes de mamoneira Influence of harvesting time and storage periods in the sanitary quality of castor bean seeds

    Directory of Open Access Journals (Sweden)

    Sheila Fanan

    2009-09-01

    Full Text Available As atuais preocupações quanto à escassez das reservas de petróleo e o agravamento do efeito estufa, pela emissão de CO2, levam a cultura da mamona a ser uma das fontes para energia renovável. Sabe-se que ao longo do ciclo da mamona são produzidos racemos de várias ordens, que se desenvolvem sob diferentes condições ambientais, podendo provocar variações na qualidade das sementes. Assim, objetivou-se avaliar a interferência da colheita e de cinco períodos de armazenamento na qualidade sanitária das sementes de mamona, cultivar IAC-2028. Para tanto, foram instalados os testes de germinação e sanidade, logo após a colheita e aos 3; 6; 9 e 12 meses de armazenamento em condições não controladas de temperatura e umidade relativa do ar. As avaliações foram feitas em esquema de parcela subdividida no tempo, onde as parcelas foram constituídas por cinco épocas trimestrais de avaliação e as sub-parcelas por 11 tratamentos. Os resultados sugerem que todos os racemos podem ser colhidos em uma única etapa, sem que ocorram perdas de qualidade das sementes.The current concerns with the scarcity of oil reserves and the aggravation of the stove effect due to CO2 emission makes the castor bean oil one viable sources for renewable energy. During the crop growth racemes are produced in several orders that develop under different environment conditions, which can cause variations in quality of the seeds on the field and storage. The purpose of this work was to evaluate effect of harvest and five periods of storage on sanitary quality of seeds of castor bean cultivar IAC-2028. The evaluation of the quality of the seeds consisted of germination and sanitary test immediately after harvest, and at 3; 6; 9 and 12 months of storage under uncontrolled conditions of air temperature and relative humidity. The results suggest that all the racemes can be harvested in a single harvesting time, without losses quality of the castor bean seeds.

  15. Inibição do desenvolvimento de fungos fitopatogênicos por detergente derivado de óleo da mamona (Ricinus communis The castor oil plant detergent (Ricinus communis inhibits the asexual development of phytopathogenic fungi

    Directory of Open Access Journals (Sweden)

    Eunice Hitomi Takano

    2007-10-01

    Full Text Available No presente estudo avaliou-se o efeito fungitóxico do detergente derivado do óleo da mamona (Ricinus communis sobre o desenvolvimento dos fitopatógenos: Pyricularia grisea, Fusarium graminearum e Colletotrichum lindemuthianum. Seis concentrações do detergente (12,5mL L-1 a 300mL L-1 foram, individualmente, incorporadas ao Meio Basal; a seguir, após inoculação fúngica, o crescimento radial dos micélios foi avaliado. A inibição total do desenvolvimento de C. lindemuthianum e P. grisea foi observada entre as concentrações de 50mL L-1 e 200mL L-1, respectivamente. Com base no crescimento miceliano das colônias de F. graminearum, a atividade antifúngica do detergente do óleo da mamona (DOM determinou inibição variável entre 79,4 e 91% para a raça F2 e entre 80,7 e 90,7% para a raça F4. O detergente, nas concentrações de 100 a 300mL L-1, inibiu em 100% a germinação de conídios de F. graminearum (raças F-4 e F-2. Os resultados demonstram nítida atividade antifúngica do detergente derivado do óleo da mamona sobre fitopatógenos.In the present study the fungitoxic effect of the castor oil plant detergent (Ricinus communis on the development of the phytopathogens Pyricularia grisea, Fusarium graminearum and Colletotrichum lindemuthianum was evaluated. Six concentrations of the detergent (12.5mL L-1 to 300mL L-1 had been, individually, incorporated to the Basal Medium. After fungi inoculations, the radial growth of mycelia were evaluated. Detergent at 50mL L-1 and 200mL L-1 inhibited completely the development of P. grisea and C. lindemuthianum, respectively. On the basis of the mycelial growth of F. graminearum, the fungitoxic activity of the castor oil plant detergent (DOM determined inhibition in the range of 79.4 and 91% for the F2 race and 80.7 and 90.7% for the F4 race. Detergent at the concentrations of 100mL L-1 to 300mL L-1 inhibited in 100% the F. graminearum germination conidia (races F-4 and F-2. Results

  16. Production of Ricinoleic Acid from Castor Oil by Free Lipase-mediated Hydrolysis%游离脂肪酶催化蓖麻油制备蓖麻油酸

    Institute of Scientific and Technical Information of China (English)

    杨威; 杜伟; 刘德华

    2014-01-01

    游离脂肪酶与固定化脂肪酶相比具有成本低、反应速率快等优势,是油脂化工中新的研究方向。前期研究表明,游离脂肪酶NS81006能高效催化多种油脂水解,进一步研究其对含独特羟基的绿色石油材料蓖麻油的水解过程,对于促进游离脂肪酶在新能源领域的应用具有重要意义。本文对影响游离脂肪酶NS81006催化蓖麻油水解过程的主要因素,温度、酶用量、水用量和搅拌速率进行了研究和优化,在优化后的条件下48 h水解率可达94.8%,且发现通过离心分离可有效实现NS81006的重复使用,连续回用5个批次,游离脂肪酶仍能有效催化水解反应。而对比高温高压法水解蓖麻油,发现游离脂肪酶NS81006具有明显优势。%Compared to immobilized lipase, free lipase has the merits of lower cost and faster reaction rate, which is a rising research orientation in oil chemical industry. The previous study showed that free lipase NS81006 is capable of efficiently hydrolyzing oil to fatty acids. Further study on its unique hydrolysis process of castor oil, an environmentally friendly hydroxyl oil, is of great importance for its application in new energy. By means of optimizing the main influence factors of the castor oil hydrolysis catalyzed by NS81006 involving temperature, enzyme dosage, water usage, and stirring speed, 98. 4% degree of hydrolysis was achieved under the optimum conditions at 48 h. The free lipase could be reused after centrifugation and maintained high catalytic efficiency in 5 consecutive recovery batches. It was also found that enzyme catalysis has obvious advantage in castor oil hydrolyzation compared with HTHP .

  17. 蓖麻油聚氧乙烯醚水基润滑液摩擦学特性研究%Lubricating Properties of the Aqueous Solution of Castor Oil Polyoxyethylene Ether

    Institute of Scientific and Technical Information of China (English)

    刘俊铭; 张晨辉; 张朝辉; 王岩; 刘思思

    2011-01-01

    本文以蓖麻油聚氧乙烯醚水基润滑液为研究对象,分别使用润滑膜厚度测量仪、微摩擦试验机和四球摩擦试验机对其成膜特性、摩擦磨损特性和抗磨极压特性进行了系统的研究,并用扫描电子显微镜和能量色散光谱仪对摩擦磨损机制进行了分析.结果表明:蓖麻油聚氧乙烯醚提高了纯水的成膜能力,能够在钢-铝摩擦副形成有效的润滑膜,起到良好的减摩抗磨效果.随着浓度的增大,对钢-铝摩擦副的减摩抗磨性能和四球摩擦试验的抗磨极压性能都得到了提高.%The soluble polyether has attracted more attention due to its excellent lubricating performance and environment -friendly properties. The lubricating characteristics of castor oil polyoxyethylene ether solution, e. G. Film forming ability, friction-reducing, ami -wear and extreme pressure properties, were systematically investigated on the lubricating film measuring instrument, universal micro - tribotester and four - ball friction tester, respectively. The friction and wear mechanisms were analyzed by scanning electron microscopy and energy dispersive spectroscopy. The results show that the film forming ability of water was improved by mixing in castor oil polyoxyethylene ether. The effective lubricating film can be formed at the tribo - interface of steel/aluminum tribo - pair to reduce friction coefficient and improve anti - wear properties. The performance of the castor oil polyoxyethylene ether solution in friction reduction, anti -wear and extreme pressure was improved with the increasing solution concentration.

  18. Clinical efficacy of oral or nasal feeding of castor oil for simple intestinal obstruction%蓖麻油辅助治疗单纯性肠梗阻疗效观察

    Institute of Scientific and Technical Information of China (English)

    李正才

    2011-01-01

    Objective To study the clinical efficacy of oral or nasal feeding of castor oil for simple intestinal obstruction. Methods 120 patients with intestinal obstruction were randomly divided into treatment group(n =60)and control group(n = 60). The patients in treatment group were given both o-ral or nasal feeding castor oil and conventional therapy for 5 days, and those in control group administered with conventional therapy alone. The clinical outcome was compared between two groups. Results The total curative rate wassignificantly higher in treatment group than in control group(P<0. 05). The mean time of gastrointestinal function recovery, passage of flatus or stool and hospital stay in treatment group were significantly shorter than in control group(P<0. 05). Conclusion Oral or nasal feeding castor oil is effective,quick and safe for treatment of simple intestinal obstruction.%目的 观察口服或鼻饲蓖麻油辅助治疗单纯性肠梗阻的临床疗效.方法 将120例肠梗阻病人随机分为治疗组(60例)和对照组(60例).治疗组在常规基础治疗上加口服或鼻饲蓖麻油,对照组仅予常规基础治疗.观察治疗5d,比较两组疗效.结果 治疗组治愈率及总有效率明显高于对照组,且临床症状改善时间、肛门排气排便时间及住院时间也均显著早于对照组,差异具有统计学意义(P<0.05).结论 口服或鼻饲蓖麻油治疗肠梗阻疗效肯定,见效快,使用安全,可以推广应用.

  19. Ocorrência de Erinnyis ello e Spodoptera marima na cultura da mamona no Rio Grande do Sul Occurrence of Erinnyis ello and Spodoptera marima in castor bean plantation in Rio Grande do Sul State, Brazil

    Directory of Open Access Journals (Sweden)

    Leandro do Prado Ribeiro

    2008-11-01

    Full Text Available O objetivo do trabalho foi realizar o levantamento populacional e verificar a ocorrência de lepidópteros associados à cultura da mamona no Rio Grande do Sul, Brasil. O estudo populacional foi realizado em cultivos de mamona, cultivar "AL Guarany 2002", implantados na área experimental do Departamento de Solos da Universidade Federal de Santa Maria, em Santa Maria, RS. A semeadura ocorreu na primeira quinzena do mês de novembro de 2006, em uma área de 0,3ha, aproximadamente. As avaliações semanais iniciaram aos 20 dias após a emergência das plantas e persistiram até a maturação das bagas, perfazendo um total de 15 avaliações, sendo as lagartas coletadas manualmente em 40 plantas aleatórias/data de avaliação. Os espécimens coletados foram levados ao Laboratório de Entomologia do DFS/UFSM, onde foram mantidos até a fase adulta. Spodoptera marima Schs. (Lepidoptera: Noctuidae e Erinnyis ello L. (Lepidoptera: Sphingidae representaram um percentual de 15,2 e 28,3% do total de lagartas coletadas, respectivamente. Assim, este estudo relata a primeira ocorrência dessas duas espécies de lepidópteros em associação à cultura da mamona no Rio Grande do Sul.The aim of this research was to carry out the population survey and check an occurrence of lepidopterous associated to castor bean plantation in Rio Grande do Sul State, Brazil. The population study was performed in castor bean plantation, AL Guarany 2002 cultivate, implemented in the experimental area Soils Department at Federal University of Santa Maria, in Santa Maria, Rio Grande do Sul State. The sow occurred in the first fifteen days of november of 2006, in an area of around 0,3 ha. The weekly appraisement started 20 days after the emergency of the plants and went until their maturation, creating a total of 15 evaluations, being the caterpillars hand collected in 40 random plants/ date of evaluation. The collected samples were brought to the Laboratory of Entomology at DFS

  20. Substratos para produção de mudas de mamoneira compostos por misturas de cinco fontes de matéria orgânica Substrates for castor seedlings production composed by blends of five organic materials

    Directory of Open Access Journals (Sweden)

    Rosiane de Lourdes Silva de Lima

    2006-06-01

    Full Text Available O plantio de mamona (Ricinus communis L. através de mudas pode ser uma alternativa para um melhor aproveitamento da curta estação chuvosa do semi-árido brasileiro, porém ainda não se dispõe de informações básicas para o emprego desta técnica. Na formulação de substratos para produção de mudas de mamona, as características físicas, principalmente a aeração, são fatores de grande importância. O presente estudo objetivou avaliar a composição de substratos utilizando misturas de solo, esterco bovino, casca de amendoim, mucilagem de sisal, bagaço de cana e cama de frango. Utilizou-se delineamento em blocos casualizados com 12 tratamentos e quatro repetições. Sementes da cultivar BRS Nordestina foram semeadas em sacos plásticos de 17 x 28cm, contendo misturas dos materiais a serem testados. Valores de altura, área foliar, número de folhas e diâmetro caulinar foram registrados semanalmente entre 15 e 43 dias após a emergência. Na última coleta também se registraram a massa seca da parte aérea e das raízes. O substrato composto por solo + casca de amendoim + cama de frango + mucilagem de sisal propiciou o melhor crescimento das mudas. A cama de frango contribuiu para o enriquecimento químico do substrato, enquanto a casca de amendoim e a mucilagem de sisal contribuíram para adequar as características físicas de aeração e retenção de água.Planting castor (Ricinus communis L. by seedlings can be an alternative for a better use of the short rainy season at brazilian semi-arid region, however there has been a lack of information necessary for this technique adoption. Physics characteristics, mainly aeration, are very important in a substrate for castor seedlings production. A trial was run in a randomized block design with 12 treatments and 4 replications in order to evaluate substrates for castor seedlings production. Treatments were blends of sand, bovine manure, peanut hulls, agave mucilage, sugarcane bagasse