WorldWideScience

Sample records for case study final

  1. The Industry Coupled Case Study Program final report

    Energy Technology Data Exchange (ETDEWEB)

    Stringfellow, J. [ed.

    1982-10-01

    The Industry Coupled Case Study Program was conceived as a short-term cooperative program between the Federal government and private industry. Federal funds were committed to stimulate geothermal exploration and development between 1977 and 1979, although some work under the program continues into 1982. Federal funding has been phased out and the remaining information developed during the program is being disseminated and reported. This report presents an overview of the program and documents the technical results and open-file data base resulting from the program.

  2. Energy conserving site design case study: Shenandoah, Georgia. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    The case study examines the means by which energy conservation can be achieved at an aggregate community level by using proper planning and analytical techniques for a new town, Shenandoah, Georgia, located twenty-five miles southwest of Atlanta's Hartsfield International Airport. A potentially implementable energy conservation community plan is achieved by a study team examining the land use options, siting characteristics of each building type, alternate infrastructure plans, possible decentralized energy options, and central utility schemes to determine how community energy conservation can be achieved by use of pre-construction planning. The concept for the development of mixed land uses as a passively sited, energy conserving community is based on a plan (Level 1 Plan) that uses the natural site characteristics, maximizes on passive energy siting requirement, and allows flexibility for the changing needs of the developers. The Level 2 Plan is identical with Level 1 plan plus a series of decentraized systems that have been added to the residential units: the single-family detached, the apartments, and the townhouses. Level 3 Plan is similar to the Level 1 Plan except that higher density dwellings have been moved to areas adjacent to central site. The total energy savings for each plan relative to the conventional plan are indicated. (MCW)

  3. Climate Change Vulnerability Assessments: Four Case Studies of Water Utility Practices (2011 Final)

    Science.gov (United States)

    EPA is releasing the final report titled, Climate Change Vulnerability Assessments: Four Case Studies of Water Utility Practices. This report was prepared by the National Center for Environmental Assessment's Global Climate Research Staff in the Office of Research and Developmen...

  4. Technology commercialization cost model and component case study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1991-12-01

    Fuel cells seem poised to emerge as a clean, efficient, and cost competitive source of fossil fuel based electric power and thermal energy. Sponsors of fuel cell technology development need to determine the validity and the attractiveness of a technology to the market in terms of meeting requirements and providing value which exceeds the total cost of ownership. Sponsors of fuel cell development have addressed this issue by requiring the developers to prepare projections of the future production cost of their fuel cells in commercial quantities. These projected costs, together with performance and life projections, provide a preliminary measure of the total value and cost of the product to the customer. Booz-Allen & Hamilton Inc. and Michael A. Cobb & Company have been retained in several assignments over the years to audit these cost projections. The audits have gone well beyond a simple review of the numbers. They have probed the underlying technical and financial assumptions, the sources of data on material and equipment costs, and explored issues such as the realistic manufacturing yields which can be expected in various processes. Based on the experience gained from these audits, the DOE gave Booz-Allen and Michael A. Cobb & company the task to develop a criteria to be used in the execution of future fuel cell manufacturing cost studies. It was thought that such a criteria would make it easier to execute such studies in the future as well as to cause such studies to be more understandable and comparable.

  5. The Impact of CETA on Institutional Vocational Education. Case Studies and Final Report, 1977.

    Science.gov (United States)

    Anderson, Robert; Rozansky, Rosa D.

    This final report summarizes the findings of the National League of Cities and U.S. Conference of Mayors concerning CETA funded programs. It also examines three case studies in Chicago; Erie, Pennsylvania; and the Virginia Peninsula. The report discusses the need for cooperation between CETA and the vocational education system. Characteristics of…

  6. CEAMF study, volume 2 : cumulative effects indicators, thresholds, and case studies : final

    International Nuclear Information System (INIS)

    The four types of cumulative effects on the environment are: alteration, loss, and fragmentation of habitat; disturbance; barriers to movement; and direct and indirect mortality. Defining where and how human activities can be continued without irreversible net harm to the environment is part of cumulative effects management. Various land-use and habitat indicators were tested in the Blueberry and Sukunka study areas of British Columbia, to address the environmental effects associated with oil and gas development. As recommended, a tiered threshold approach was used to allow for flexibility in different land management regimes and ecological settings. Success will depend on defining acceptable change, threshold values, standard public database, standard processes to calculate indicator values using the database, and project-specific and cooperative management actions. A pilot study was suggested to test the candidate thresholds and implementation process. The two areas proposed for consideration were the Jedney Enhanced Resource Development Resource Management Zone in the Fort St. John Forest District, and the Etsho Enhanced Resource Development Resource Management Zone in the Fort Nelson Forest District. Both are of interest to the petroleum and forest sectors, and support the woodland caribou, a species which is extremely sensitive to cumulative effects of habitat fragmentation and disturbance. 117 refs., 11 tabs., 39 figs.

  7. 2007 Wholesale Power Rate Case Final Proposal : Wholesale Power Rate Development Study.

    Energy Technology Data Exchange (ETDEWEB)

    United States. Bonneville Power Administration.

    2006-07-01

    The Wholesale Power Rate Development Study (WPRDS) serves two primary purposes. It synthesizes information supplied by the other final studies that comprise the BPA rate proposal and shows the actual calculations for BPA's power rates. In addition, the WPRDS is the primary source for certain information used in establishing the power rates. Information developed in the WPRDS includes rate design (including seasonal and diurnal shapes for energy rates, demand, and load variance rates), the risk mitigation tools (Cost Recovery Adjustment Clause (CRAC), along with the [N]ational Marine Fisheries Service [F]ederal Columbia River Power System [B]iological Opinion (NFB) Adjustment, the Emergency NFB Surcharge, and Dividend Distribution Clause (DDC)), development of the Slice rate, and all discounts and other adjustments that are included in the rate schedules and the General Rate Schedule Provisions. The WPRDS also includes the description of the methodology for the Cost of Service Analysis (COSA), and the various rate design steps necessary to establish BPA's power rates. The WPRDS also shows the calculations for inter-business line revenues and expenses, the revenue forecast and, finally, includes a description of all of the rate schedules. The actual rate schedules are shown in ''Administrator's Final Record of Decision (ROD), Appendix A: 2007 Wholesale Power Rate Schedules and General Rate Schedule Provisions, WP-07-A-02''. The WPRDS also includes the Partial Resolution of Issues, shown in Attachment 1 of the ROD. The Partial Resolution of Issues affected many of the features described in this study. These are noted where appropriate.

  8. Case studies of thermal energy storage (TES) systems: Evaluation and verification of system performance. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Akbari, H.; Sezgen, O.

    1992-01-01

    We have developed two case studies to review and analyze energy performance of thermal energy storage CMS systems in commercial buildings. Our case studies considered two partial ice storage systems in Northern California. For each case, we compiled historical data on TES design, installation, and operation. This information was further enhanced by data obtained through interviews with the building owners and operators. The performance and historical data of the TES systems and their components were grouped into issues related to design, installation, operation, and maintenance of the systems. Our analysis indicated that (1) almost all problems related to the operation of TES and non-TES systems could be traced back to the design of the system, and (2) the identified problems were not unique to the TES systems. There were as many original problems with ``conventional`` HVAC systems and components as with TES systems. Judging from the problems related to non-TES components identified in these two case studies, it is reasonable to conclude that conventional systems have as many problems as TES systems, but a failure, in a TES system may have a more dramatic impact on thermal comfort and electricity charges. The objective of the designers of the TES systems in the case-study buildings was to design just-the-right-size systems so that both the initial investment and operating costs would be minimized. Given such criteria, a system is typically designed only for normal and steady-state operating conditions-which often precludes due consideration to factors such as maintenance, growth in the needed capacity, ease of the operation, and modularity of the systems. Therefore, it is not surprising to find that these systems, at least initially, did not perform to the design intent and expectation and that they had to go through extended periods of trouble-shooting.

  9. Tornado missile risk analysis: probability modeling, simulation methodology, and case studies. Final report

    International Nuclear Information System (INIS)

    Mathematical models of the contributing events to the tornado missile hazard at nuclear power plants have been developed in which the major sources of uncertainty have been considered in a probabilistic framework. These models have been structured into a sequential event formalism which permits the treatment of both single and multiple missile generation events. A simulation computer code utilizing these models has been developed to obtain estimates of tornado missile event likelihoods. Two case studies have been analyzed: a single unit plant using the current NRC set of missiles and a two unit arrangement using an expanded missile set. Preliminary results suggest that the likelihood of missile strike and that of subsequent plant damage may be acceptably small

  10. Energy-conserving site-design case study, Radisson, New York. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1979-12-01

    Radisson is a 2,950-acre new community currently being developed by the New York State Urban Development Corporation and located in central New York, 12 miles north-west of Syracuse. Case-study sites selected for this project are a 95-acre residential site and the 51-acre Town Center of the new community. Development on the Residential Site is a low-density (2.8 dwelling units/acre) mixture of single-family, townhouse and multi-family units. Development on the Town Center site is a mixture of small-scale commercial use (144,000 sq. ft.) and 330+ multi-family dwelling units. Energy-conserving plans developed for both sites have focused on passive measures to reduce energy use for space heating. Utility-system options have been identified for both sites, but require further study as to feasibility and cost. This report summarizes energy savings and cost differentials due to passive measures incorporated in both the residential and Town Center Plans. The future implementation schedule, also discussed, summarizes the procedures an schedule required for implementation of the passive measures, as well as further study required for the development of utility-system options. 4 tables.

  11. Final Report for High Latitude Climate Modeling: ARM Takes Us Beyond Case Studies

    Energy Technology Data Exchange (ETDEWEB)

    Russell, Lynn M [Scripps/UCSD; Lubin, Dan [Scripps/UCSD

    2013-06-18

    The main thrust of this project was to devise a method by which the majority of North Slope of Alaska (NSA) meteorological and radiometric data, collected on a daily basis, could be used to evaluate and improve global climate model (GCM) simulations and their parameterizations, particularly for cloud microphysics. Although the standard ARM Program sensors for a less complete suite of instruments for cloud and aerosol studies than the instruments on an intensive field program such as the 2008 Indirect and Semi-Direct Aerosol Campaign (ISDAC), the advantage they offer lies in the long time base and large volume of data that covers a wide range of meteorological and climatological conditions. The challenge has been devising a method to interpret the NSA data in a practical way, so that a wide variety of meteorological conditions in all seasons can be examined with climate models. If successful, climate modelers would have a robust alternative to the usual “case study” approach (i.e., from intensive field programs only) for testing and evaluating their parameterizations’ performance. Understanding climate change on regional scales requires a broad scientific consideration of anthropogenic influences that goes beyond greenhouse gas emissions to also include aerosol-induced changes in cloud properties. For instance, it is now clear that on small scales, human-induced aerosol plumes can exert microclimatic radiative and hydrologic forcing that rivals that of greenhouse gas–forced warming. This project has made significant scientific progress by investigating what causes successive versions of climate models continue to exhibit errors in cloud amount, cloud microphysical and radiative properties, precipitation, and radiation balance, as compared with observations and, in particular, in Arctic regions. To find out what is going wrong, we have tested the models' cloud representation over the full range of meteorological conditions found in the Arctic using the

  12. PR and PP evaluation. ESFR full system case study final report (Tentative translation)

    International Nuclear Information System (INIS)

    The Generation IV (GEN IV) International Forum (GIF) Proliferation Resistance and Physical Protection Working Group (PRPP WG) was established in December, 2002, as one of the crosscut groups under GIF, in order to develop a methodology for evaluating PR and PP of potential GEN IV options. The group currently consists of the experts from the U.S. national laboratories and universities, from Canada, France, Republic of Korea (ROK), Japan, the International Atomic Energy Agency (IAEA), and European Union(EU). The present report, published in Oct. 2009, was used as a supporting study for development of the evaluation methodology for proliferation resistance and physical protection of GEN IV nuclear energy systems. The present report is summarizing the case study of the PR and PP evaluation of Example Sodium Fast Reactor (ESFR), a hypothetical nuclear energy system consisting of nine main system elements, and it provides for designers the practical experience of applying the PR and PP evaluation methodology to a nuclear energy system. The development of the future nuclear fuel cycle system with sufficient PR and PP features is a crucial task in Japan, and the demonstration and explanation about its effectiveness to the domestic and international society will be required. With the usefulness the present report for such purposes, it was translated and published here as a Japanese-language edition with the concurrence of the OECD-NEA. The original report in English language can be downloaded at the OECD-NEA website. The translation was performed as closely as possible to the original, and special attention was paid to the technical term translation for consistency. Terms difficult to be translated appropriately into Japanese was written with the original English wording. Safeguards terms were translated with reference to “IAEA Safeguards Glossary 2001 Edition” (Japanese), published by the Nuclear Material Control Center Japan (NMCC). The authors are grateful to the GIF

  13. The Identity Project: in-depth case studies of Identity Management - UCL institutional audit. Final report

    OpenAIRE

    Stone, M

    2008-01-01

    This report presents the results of an audit of identity management practices at UCL, as part of Work Package 2 of The Identity Project (http://www.identity-project.info), a study funded under the JISC e-infrastructure programme, to address the current practice and future needs of UK academic institutions in Identity Management. After an introduction to the organisational context and a description of the audit methodology, the results of fifteen interviews are presented thematically

  14. Case Studies

    International Nuclear Information System (INIS)

    Proven options available to Sri Lanka for large scale electricity generation in the future are coal-fired thermal, oil-fired thermal and Nuclear. Four case studies for groups participated are indicated. Case study for group 1 is comparison of the three options by taking into consideration the capital and recurrent expenditure involved. Environmental effects of the three options are also given. Case study for group 2 is economic comparison of three renewable energy based power generation system. Case study for group 3 is based on energy conservation, efficiency, improvement and demand management. Assuming that a continuous saving of 20 MW of demand from 1996 onwards is effective two projects are suggested to achieve this result. Case study for group 4 is a feasibility study for hydro power development of the Kukule Ganga (river) in Sri Lanka. Participants are required to evaluate one of the three optional development concepts which are technically feasible

  15. The Impact of the Pre-Instructional Cognitive Profile on Learning Gain and Final Exam of Physics Courses: A Case Study

    Science.gov (United States)

    Capizzo, Maria Concetta; Nuzzo, Silvana; Zarcone, Michelangelo

    2006-01-01

    The case study described in this paper investigates the relationship among some pre-instructional knowledge, the learning gain and the final physics performance of computing engineering students in the introductory physics course. The results of the entrance engineering test (EET) have been used as a measurement of reading comprehension, logic and…

  16. A CASE STUDY IN HUNGARIAN EDUCATION POLITICS: THE 2005 REFORM OF MIDDLE SCHOOL FINAL EXAM AND UNIVERSITY ENTRANCE EXAM

    OpenAIRE

    Lilla BAUER

    2012-01-01

    This study attempts to show how a public policy issue can contribute to abandoning the traditional model of public administration and government in favour of what has been called the model of public administration management and the theory of good governance. The chosen issue is the Hungarian reform of Middle School Final Exam and University Entrance Exam that took place in the course of overarching governments from the initial steps in 1993 until its realization in 2005. As we follow the pro...

  17. Development of a risk analysis model. Appendix F. District heating and cooling system case study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-10-01

    The risk analysis reported in this appendix was concerned with a business venture in the area of district energy systems using thermal energy cogenerated at existing electric power plants. After an introductory section, Section 2, Institutional Issues, discusses investment decisions and regulatory constraints and issues; Section 3 reviews public utility company objectives and investment analysis approach; Section 4 reviews the case study of district heating and cooling systems (DHCS) in Washington, DC; Section 5 results of the Minneapolis/St. Paul case DHCS study; Section 6 summarizes the desired risk-analysis methodology for evaluating regulated utility investment decisions; and Section 7 presents overall conclusions. (MCW)

  18. Information Flow Management in Port Agency for Final Disbursement Accounts (FDA) : Case Study: Supermaritime Company Limited, Ghana

    OpenAIRE

    Amoako, Shirley Baaba

    2014-01-01

    Information flow management in the shipping industry can be very challenging since the operations in the industry deals with dozens of chartering operations, heavy volume of data, documentations and several paperwork which cuts across various functional departments and also within the internal and external network chain in the industry. The process of a Final Disbursement Account is one such area of operation in the industry that though little attention has been given to it, is a daunting tas...

  19. Solid waste containing persistent organic pollutants in Serbia: From precautionary measures to the final treatment (case study).

    Science.gov (United States)

    Stevanovic-Carapina, Hristina; Milic, Jelena; Curcic, Marijana; Randjelovic, Jasminka; Krinulovic, Katarina; Jovovic, Aleksandar; Brnjas, Zvonko

    2016-07-01

    Sustainable solid waste management needs more dedicated attention in respect of environmental and human health protection. Solid waste containing persistent organic pollutants is of special concern, since persistent organic pollutants are persistent, toxic and of high risk to human health and the environment. The objective of this investigation was to identify critical points in the Serbian system of solid waste and persistent organic pollutants management, to assure the life cycle management of persistent organic pollutants and products containing these chemicals, including prevention and final destruction. Data were collected from the Serbian competent authorities, and led us to identify preventive actions for solid waste management that should reduce or minimise release of persistent organic pollutants into the environment, and to propose actions necessary for persistent organic pollutants solid waste. The adverse impact of persistent organic pollutants is multidimensional. Owing to the lack of treatment or disposal plants for hazardous waste in Serbia, the only option at the moment to manage persistent organic pollutants waste is to keep it in temporary storage and when conditions are created (primarily financial), such waste should be exported for destruction in hazardous waste incinerators. Meanwhile, it needs to be assured that any persistent organic pollutants management activity does not negatively impact recycling flows or disturb progress towards a more circular economy in Serbia. PMID:27281225

  20. An Analysis of CMPF112 Computing Skills Final Examination Subsection Questions for Foundation Students in CFGS: A Case Study

    OpenAIRE

    Noorazizun Mohd Saad; Law Yi Feng

    2014-01-01

    Foundation students are those students after SPM, and starting new life in campus environment. The transition between the styles of education from spoon-fed in high school to lectures in university surely affected the way they think and act. As CMPF112 Computing Skills are among the early subject being taught, it is interesting to study how the student answering questions which created based on Bloom Taxonomy, using their high school experiences only. This study analyzed three sections in CMP...

  1. Post licensing case study of community effects at two operating nuclear power plants. Final report, March 1975--March 1976

    Energy Technology Data Exchange (ETDEWEB)

    Purdy, B.J.; Peelle, E.; Bjornstad, D.J.; Mattingly, T.J. Jr.; Soderstrom, J.; DeVault, R.C.

    1976-06-01

    The social, economic, and political/institutional impacts of two operating nuclear power complexes on two New England communities are studied. The report includes discussions of the study design and objectives, profiles of the towns of Plymouth, Massachusetts, and Waterford, Connecticut, and analysis of the social, economic, and political impacts as observed by members of the ORNL staff. Results are presented from an attitude survey as well as a social impact classification schema devised as a methodological tool.

  2. Post licensing case study of community effects at two operating nuclear power plants. Final report, March 1975--March 1976

    International Nuclear Information System (INIS)

    The social, economic, and political/institutional impacts of two operating nuclear power complexes on two New England communities are studied. The report includes discussions of the study design and objectives, profiles of the towns of Plymouth, Massachusetts, and Waterford, Connecticut, and analysis of the social, economic, and political impacts as observed by members of the ORNL staff. Results are presented from an attitude survey as well as a social impact classification schema devised as a methodological tool

  3. Impact of the Mexican Alien Commuter on the Apparel Industry of El Paso, Texas--A Case Study. Final Report.

    Science.gov (United States)

    Rungeling, Brian Scott

    This study analyzed what effect commuters had on wage levels, employment, and industrial locations, and the relative importance of the commuter as part of the work force. A questionnaire was administered to 190 workers and to their 20 employers in the apparel industry of El Paso, Texas. The questionnaires revealed that the commuters were paid the…

  4. Case Study: Writing a Journal Case Study

    Science.gov (United States)

    Prud'homme-Genereux, Annie

    2016-01-01

    This column provides original articles on innovations in case study teaching, assessment of the method, as well as case studies with teaching notes. This month's issue describes incorporating a journal article into the classroom by first converting it into a case study.

  5. NOx trade. Case studies

    International Nuclear Information System (INIS)

    Some of the questions with respect to the trade of nitrogen oxides that businesses in the Netherlands have to deal with are dealt with: should a business buy or sell rights for NOx emission; which measures must be taken to reduce NOx emission; how much must be invested; and how to deal with uncertainties with regard to prices. Simulations were carried out with the MOSES model to find the answers to those questions. Results of some case studies are presented, focusing on the chemical sector in the Netherlands. Finally, the financial (dis)advantages of NOx trade and the related uncertainties for a single enterprise are discussed

  6. Case Decision Project. Final Report (Process Evaluation).

    Science.gov (United States)

    McDaniel, Garry

    The goal of the Case Decision Project (CDP) was to develop a method to improve the efficiency and effectiveness of program management in child protective services in Texas. At the onset of the project, workers across the state had no uniform method of obtaining case information. Therefore, an automated case investigation system was developed.…

  7. Case study Sylt - Consequences and integrated assessment of climate change. Final report; Klimaaenderung und Kueste. Fallstudie Sylt - Integrative Analyse und Bewertung der Folgen von Klimaaenderungen. Endbericht

    Energy Technology Data Exchange (ETDEWEB)

    Fraenzle, O.; Sterr, H.; Daschkeit, A.

    2001-05-01

    This final report deals with the structure of the 'case study Sylt' against the background of climate change and possible consequences. In cooperation with the other projects of the case study an instrument is developed which maintains interdisciplinary communication and cooperation. First the 'System Sylt' is described to identify and specify the relevant aspects of functional relationships between the natural and the social system. The focal points are (1) the first-order impacts of climate change, (2) the potential ecological changes in the near future and (3) the image of the North-Sea island Sylt. With regard to the image of Sylt we find some discrepancies existing between a statical respectively a dynamical view; these discrepancies are inherent parts of the future development. All results are seen in the context of 'Integrated Coastal Zone Management' (ICZM) to derive general and specific recommendations for political action and further research. (orig.) [German] Vor dem Hintergrund von Annahmen bezueglich der zukuenftigen klimatischen Entwicklung werden die Konzeption sowie die Vorgehensweise der integrativen Analyse im Rahmen der Fallstudie Sylt dargestellt. Unter Anbindung an das Sylt-GIS wird ein Instrument entwickelt und erprobt, das die (bislang seltene) fachuebergreifende Analyse von Klimafolgen unterstuetzt. Diese muendet zunaechst in eine Darstellung des 'Systems Sylt' auf der Grundlage der wichtigsten Prozesse und Randbedingungen. Die auf dieser Basis identifizierten Kernberichte des 'Systems Sylt' werden in einem weiteren exemplarisch und unter Einbezug des in den disziplinaeren Teilvorhaben der Fallstudie erarbeiteten Wissens einer vertiefenden Analyse unterzogen. Dabei wird erstens auf den Bereich der Folgen eines moeglichen Klimawandels eingegangen, zweitens auf vergangene und zukuenftig moegliche oekologische Veraenderungen und drittens auf das Sylt-Image. Durch eine detailliertere Analyse des

  8. Case Studies of integrated hydrogen systems. International Energy Agency Hydrogen Implementing Agreement, Final report for Subtask A of task 11 - Integrated Systems

    Energy Technology Data Exchange (ETDEWEB)

    Schucan, T. [Paul Scherrer Inst., Villigen PSI (Switzerland)

    1999-12-31

    Within the framework of the International Energy Agency Hydrogen Implementing Agreement, Task 11 was undertaken to develop tools to assist in the design and evaluation of existing and potential hydrogen demonstration projects. Emphasis was placed on integrated systems, from input energy to hydrogen end use. Included in the PDF document are the Executive Summary of the final report and the various case studies. The activities of task 11 were focused on near- and mid-term applications, with consideration for the transition from fossil-based systems to sustainable hydrogen energy systems. The participating countries were Canada, Italy, Japan, the Netherlands, Spain, Switzerland and the United States. In order for hydrogen to become a competitive energy carrier, experience and operating data need to be generated and collected through demonstration projects. A framework of scientific principles, technical expertise, and analytical evaluation and assessment needed to be developed to aid in the design and optimization of hydrogen demonstration projects to promote implementation. The task participants undertook research within the framework of three highly coordinated subtasks that focused on the collection and critical evaluation of data from existing demonstration projects around the world, the development and testing of computer models of hydrogen components and integrated systems, and the evaluation and comparison of hydrogen systems. While the Executive Summary reflects work on all three subtasks, this collection of chapters refers only to the work performed under Subtask A. Ten projects were analyzed and evaluated in detail as part of Subtask A, Case Studies. The projects and the project partners were: Solar Hydrogen Demonstration Project, Solar-Wasserstoff-Bayern, Bayernwerk, BMW, Linde, Siemens (Germany); Solar Hydrogen Plant on Residential House, M. Friedli (Switzerland); A.T. Stuart Renewable Energy Test Site; Stuart Energy Systems (Canada); PHOEBUS Juelich

  9. Case studies to assess and compare different energy sources in sustainable energy and electricity supply strategies. Final report of a co-ordinated project 1997-2000

    International Nuclear Information System (INIS)

    easy integration into other energy planning or analysis tools. DECADES was thus organized as a data management system rather than as an overall or long range energy planning tool. In 1997, the IAEA initiated a co-ordinated research project (CRP) on Case Studies to Assess and Compare Different Sources in Sustainable Energy and Electricity Supply Strategies under the aegis of the DECADES project to conduct a series of national studies using the DECADES package (DECPAC). Under this CRP, experts from more than twenty countries utilized databases and methodologies developed and reviewed under the DECADES project to carry out national comparative assessment studies. At a final Research Co-ordination Meeting (RCM), held from 14 to 16 December 1999, meeting participants agreed on the format of executive summaries to be prepared for each of the national case studies. This publication summarizes the results obtained and the lessons learned from national case studies carried out under the CRP. The report is intended primarily for managers and senior experts in governmental organizations, research institutes and power utilities who are involved in energy and environmental analysis, interpretation of model results and translation into decision and policy making

  10. Case Study Teaching

    Science.gov (United States)

    Herreid, Clyde Freeman

    2011-01-01

    This chapter describes the history of case study teaching, types of cases, and experimental data supporting their effectiveness. It also describes a model for comparing the efficacy of the various case study methods. (Contains 1 figure.)

  11. Small-scale bioenergy initiatives: brief description and preliminary lessons on livelihood impacts from case studies in Asia, Latin America and Afica. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-01-15

    Fifteen case studies from Africa, Asia, and Latin America were undertaken to assess the impacts that different types of local-level bioenergy initiatives can have on rural livelihoods. The report concludes with preliminary lessons and recommendations for further work.

  12. Project management case studies

    CERN Document Server

    Kerzner, Harold R

    2013-01-01

    A new edition of the most popular book of project management case studies, expanded to include more than 100 cases plus a ""super case"" on the Iridium Project Case studies are an important part of project management education and training. This Fourth Edition of Harold Kerzner''s Project Management Case Studies features a number of new cases covering value measurement in project management. Also included is the well-received ""super case,"" which covers all aspects of project management and may be used as a capstone for a course. This new edition:Contains 100-plus case studies drawn from re

  13. IGSC Safety Case Brochure - Final Comment Opportunity

    International Nuclear Information System (INIS)

    Abe Van Luik (IGSC Chairman, US-DOE-YM) gave a quick overview of the status of the IGSC safety case brochure titled: 'The Nature and Purpose of the Post-closure Safety Case in Geological Disposal'. The need for IGSC member review, and the schedule for the review process, was explained. The objective was to have a document to present to the March 2004 RWMC meeting for its approval. In discussion it was noted that this document was in good agreement with the safety case content of the Safety Requirements document described by the preceding presenter. It accurately paraphrases the IAEA document's definition and expands on the idea of a safety case without contradiction of that document

  14. Theory testing using case studies

    DEFF Research Database (Denmark)

    Dissing Sørensen, Pernille; Løkke Nielsen, Ann-Kristina

    Case studies may have different research goals. One such goal is the testing of small-scale and middle-range theories. Theory testing refers to the critical examination, observation, and evaluation of the 'why' and 'how' of a specified phenomenon in a particular setting. In this paper, we focus on...... the strengths of theory-testing case studies. We specify research paths associated with theory testing in case studies and present a coherent argument for the logic of theoretical development and refinement using case studies. We emphasize different uses of rival explanations and their implications...... for research design. Finally, we discuss the epistemological logic, i.e., the value to larger research programmes, of such studies and, following Lakatos, conclude that the value of theory-testing case studies lies beyond naïve falsification and in their contribution to developing research programmes...

  15. Vertebral Angiosarcoma. Case Study.

    Science.gov (United States)

    Guzik, Grzegorz

    2015-01-01

    Bone angiosarcomas, especially vertebral angiosarcomas, are very rare. There are no studies based on large clinical samples in the literature, and only a few single case reports can be found. The symptoms of the disease are not specific. It is usually detected incidentally or at a late stage when pathological vertebral fractures or neurological complications occur. Diagnostic imaging and history help to recognize the tumour behind the symptoms, but do not allow accurate clinical diagnosis. The basis for a diagnosis is the histopathological examination supported by immunohistochemistry (IHC) assays. The case of a 26-year-old woman with an angiosarcoma involving the eighth thoracic vertebra we report reflects diagnostic problems adversely affecting the efficacy and accuracy of treatment offered to patients. The patient underwent three surgeries of the spine, including two biopsies. A needle biopsy did not provide sufficient information for the diagnosis. An open excisional biopsy, which at the same time temporarily reduced neurological deficits in the patient, was the only chance to obtain an accurate diagnosis. The third surgery was posterior decompression of the spinal cord due to the rapidly escalating paraparesis. It was not until 8 weeks later that the final diagnosis was established. At that time, the patient could not be qualified for any supplementary treatment. The patient died in hospital 6 months after the onset of disease. PMID:26468177

  16. Project SEARCH: Special Education as Requirements in Charter Schools. Final Report of a Research Study: Cross-State Analysis of Findings and Summaries of State Case Studies.

    Science.gov (United States)

    Ahearn, Eileen M.; Lange, Cheryl M.; Rhim, Lauren Morando; McLaughlin, Margaret J.

    This document presents findings of Project SEARCH, a qualitative research study of how charter schools interpret laws and regulations governing the education of children with disabilities, especially the federal Individuals with Disabilities Education Act (IDEA). The project involved a preliminary 15-state policy analysis followed by in-depth case…

  17. Integrated health and environmental risk assessment and risk management in large industrial areas. Case study Zagreb (CSZ). Final report for 1992

    International Nuclear Information System (INIS)

    This report is the result of the Phase 1 of the research within the Case Study Zagreb co-financed by the IAEA according to the project YUG/9/029. The basic long term aim of the project is the reduction in hazards to human health and to the environment in the area of Zagreb. This project is about risk assessment and risk management to achieve the environment protection goals

  18. Comparison of cost effectiveness of risk reduction among different energy systems: French case studies. Final report of the co-ordinated research programme

    International Nuclear Information System (INIS)

    This report presents the three French case studies performed in the framework of the coordinated research program on 'Comparison of Cost-effectiveness of Risk Reduction among different Energy Systems': Cost effectiveness of robotics and remote tooling for occupational risk reduction at a nuclear fuel fabrication facility; Cost-effectiveness of protection actions to reduce occupational exposures in underground uranium mines; Cost-effectiveness of safety measures to reduce public risk associated with the transportation of UF6 by truck and trains

  19. Comparison of cost effectiveness of risk reduction among different energy systems: French case studies. Final report for the period 1 May 1982 - 20 February 1988

    International Nuclear Information System (INIS)

    The report presents the three French case studies performed in the framework of the co-ordinated research programme on ''Comparison of Cost-Effectiveness of Risk Reduction Among Different Energy Systems'': cost-effectiveness of robotics and remote tooling for occupational risk reduction at a nuclear fuel fabrication facility; cost-effectiveness of protection actions to reduce occupational exposure in underground uranium mines; cost effectiveness of safety measures to reduce public risk associated with the transportation of UF6 by truck and trains. Figs and tabs

  20. FMCT verification: Case studies

    International Nuclear Information System (INIS)

    for states that have traditionally had 'less transparency' in their military sectors. As case studies, first we investigate how to applied verification measures including remote sensing, off-site environmental sampling and on-site inspections to monitor the shutdown status of plutonium production facilities, and what measures could be taken to prevent the disclosure of sensitive information at the site. We find the most effective verification measure to monitor the status of the reprocessing plant would be on-site environmental sampling. Some countries may worry that sample analysis could disclose sensitive information about their past plutonium production activities. However, we find that sample analysis at the reprocessing site need not reveal such information. Sampling would not reveal such information as long as inspectors are not able to measure total quantities of Cs-137 and Sr-90 from HLW produced at former military plutonium production facilities. Secondly, we consider verification measures for shutdown gaseous diffusion uranium-enrichment plants (GDPs). The GDPs could be monitored effectively by satellite imagery, as one telltale operational signature of the GDP would be the water-vapor plume coming from the cooling tower, which should be easy to detect with satellite images. Furthermore, the hot roof of the enrichment building could be detectable using satellite thermal-infrared images. Finally, some on-site verification measures should be allowed, such as visual observation, surveillance and tamper-indicating seals. Finally, FMCT verification regime would have to be designed to detect undeclared fissile material production activities and facilities. These verification measures could include something like special or challenge inspections or complementary access. There would need to be provisions to prevent the abuse of such inspections, especially at sensitive and non-proscribed military and nuclear activities. In particular, to protect sensitive

  1. Environmental costs and benefits case study: nuclear power plant. Quantification and economic valuation of selected environmental impacts/effects. Final report

    International Nuclear Information System (INIS)

    This case study is an application, to a nuclear power plant, of the methodology for quantifying environmental costs and benefits, contained in the regional energy plan, adopted in April, 1983, by the Northwest Power Planning Council, pursuant to Public Law 96-501.The study is based on plant number 2 of the Washington Public Power Supply System (WNP-2), currently nearing completion on the Hanford Nuclear Reservation in eastern Washington State. This report describes and documents efforts to quantify and estimate monetary values for the following seven areas of environmental effects: radiation/health effects, socioeconomic/infrastructure effects, consumptive use of water, psychological/health effects (fear/stress), waste management, nuclear power plant accidents, and decommissioning costs. 103 references

  2. Compact torus studies: Final report

    International Nuclear Information System (INIS)

    The compact torus (CT) device has been proposed for use in some applications which are of interest in Laboratory programs in the areas of pulsed power and inertial confinement fusion. These applications involve compression and acceleration of CT plasmas. The RACE (Ring Accelerator Experiment) experimental program at Livermore has been initiated to study these applications. The work reported here involves studies of plasma physics and other aspects of these compact torus applications. The studies conducted identify specific problem areas associated with the CT device and examine these areas in some detail. This report contains studies of three particular problem areas of the CT applications. These three areas are: the general nonlinear properties of the CT as a magnetohydrodynamic (MHD) equilibrium, particle simulation of the compression of the CT, with a focus on the non-MHD effects, and nonlinear RF interaction problems in the CT

  3. Preliminary study Malaa. Final report

    International Nuclear Information System (INIS)

    Factors of importance for a possible localization of a deep nuclear waste repository at Malaa in northern Sweden are mapped in this study. The geologic structures in the area have been reviewed, mostly from already existing knowledge. Existing infrastructure and necessary improvements are discussed, as well as land use and environment, employment and other social effects. 47 refs, 41 figs, 8 tabs

  4. Spelling in African American Children: The Case of Final Consonant Devoicing

    Science.gov (United States)

    Treiman, Rebecca; Bowman, Margo

    2015-01-01

    This study examined the effect of dialect variation on children's spelling by using devoicing of final /d/ in African American Vernacular English (AAVE) as a test case. In line with the linguistic interference hypothesis, African American 6-year-olds were significantly poorer at spelling the final "d" of words such as "salad"…

  5. IEA Wind Task 26 - Multi-national Case Study of the Financial Cost of Wind Energy; Work Package 1 Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Schwabe, P.; Lensink, S.; Hand, M.

    2011-03-01

    The lifetime cost of wind energy is comprised of a number of components including the investment cost, operation and maintenance costs, financing costs, and annual energy production. Accurate representation of these cost streams is critical in estimating a wind plant's cost of energy. Some of these cost streams will vary over the life of a given project. From the outset of project development, investors in wind energy have relatively certain knowledge of the plant's lifetime cost of wind energy. This is because a wind energy project's installed costs and mean wind speed are known early on, and wind generation generally has low variable operation and maintenance costs, zero fuel cost, and no carbon emissions cost. Despite these inherent characteristics, there are wide variations in the cost of wind energy internationally, which is the focus of this report. Using a multinational case-study approach, this work seeks to understand the sources of wind energy cost differences among seven countries under International Energy Agency (IEA) Wind Task 26 - Cost of Wind Energy. The participating countries in this study include Denmark, Germany, the Netherlands, Spain, Sweden, Switzerland, and the United States. Due to data availability, onshore wind energy is the primary focus of this study, though a small sample of reported offshore cost data is also included.

  6. Dickinson geothermal study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Fossum, G.O.; Harris, K.L.; Hassett, D.J.; Mathsen, D.V.; Owens, T.C.

    1982-06-01

    The Inyan Kara Formation provides an abundant source of warm (54 to 71/sup 0/C) but salty (7400 mg/l combined Na and Cl ions) water for much of southwestern North Dakota. The city of Dickinson, ND, overlies this aquifer at 1676 to 1768 meters. This study investigates the potential of usng this hydrothermal resource as an energy source for a district heating system in a new undeveloped addition to Dickinson. In addition, the use of a reverse osmosis system to desalinate the water is considered along with other water treatment processes necessary to allow use of this water in the existing city water supply. The results of the study indicate the economic requirements to make this concept feasible and outline the consideration to carry the project into the design phase.

  7. Laser fusion study. Final report

    International Nuclear Information System (INIS)

    The following appendices are included: (1) sensor performance calculation techniques, (2) focus sensing, (3) purchased item data, (4) pointing and focusing configuration tradeoff studies, (5) false start centering sensor, (6) RCA application notes on quad delection, (7) elliptical flex pivot analysis, (8) servo mirrors cross coupling, (9) optical misalignment analysis, (10) stress induced birefrigent quarter-wave retarder, (11) data bulletin on incramute damping alloy, (12) the utilization of stepping motors, and (13) computer program listing for stepper motor load simulation

  8. Subject search study. Final report

    International Nuclear Information System (INIS)

    The study gathered information on how users search the database of the International Nuclear Information System (INIS), using indicators such as Subject categories, Controlled terms, Subject headings, Free-text words, combinations of the above. Users participated from the Australian, French, Russian and Spanish INIS Centres, that have different national languages. Participants, both intermediaries and end users, replied to a questionnaire and executed search queries. The INIS Secretariat at the IAEA also participated. A protocol of all search strategies used in actual searches in the database was kept. The thought process for Russian and Spanish users is predominantly non-English and also the actual initial search formulation is predominantly non-English among Russian and Spanish users while it tends to be more in English among French users. A total of 1002 searches were executed by the five INIS centres including the IAEA. The search protocols indicate the following search behaviour: 1) free text words represent about 40% of search points on an average query; 2) descriptors used as search keys have the widest range as percentage of search points, from a low of 25% to a high of 48%; 3) search keys consisting of free text that coincides with a descriptor account for about 15% of search points; 4) Subject Categories are not used in many searches; 5) free text words are present as search points in about 80% of all searches; 6) controlled terms (descriptors) are used very extensively and appear in about 90% of all searches; 7) Subject Headings were used in only a few percent of searches. From the results of the study one can conclude that there is a greater reluctance on the part of non-native English speakers in initiating their searches by using free text word searches. Also: Subject Categories are little used in searching the database; both free text terms and controlled terms are the predominant types of search keys used, whereby the controlled terms are used more

  9. HYDROGEOLOGIC CASE STUDIES

    Science.gov (United States)

    Hydrogeology is the foundation of subsurface site characterization for evaluations of monitored natural attenuation (MNA). Three case studies are presented. Examples of the potentially detrimental effects of drilling additives on ground-water samples from monitoring wells are d...

  10. Development of a geothermal resource in a fractured volcanic formation: Case study of the Sumikawa Geothermal Field, Japan. Final report, May 1, 1995--November 30, 1997

    Energy Technology Data Exchange (ETDEWEB)

    Garg, S.K.; Combs, J.; Pritchett, J.W. [and others

    1997-07-01

    The principal purpose of this case study of the Sumikawa Geothermal Field is to document and to evaluate the use of drilling logs, surface and downhole geophysical measurements, chemical analyses and pressure transient data for the assessment of a high temperature volcanic geothermal field. This comprehensive report describes the work accomplished during FY 1993-1996. A brief review of the geological and geophysical surveys at the Sumikawa Geothermal Field is presented (Section 2). Chemical data, consisting of analyses of steam and water from Sumikawa wells, are described and interpreted to indicate compositions and temperatures of reservoir fluids (Section 3). The drilling information and downhole pressure, temperature and spinner surveys are used to determine feedzone locations, pressures and temperatures (Section 4). Available injection and production data from both slim holes and large-diameter wells are analyzed to evaluate injectivity/productivity indices and to investigate the variation of discharge rate with borehole diameter (Section 5). New interpretations of pressure transient data from several wells are discussed (Section 6). The available data have been synthesized to formulate a conceptual model for the Sumikawa Geothermal Field (Section 7).

  11. Objectivist case study research

    DEFF Research Database (Denmark)

    Ridder, Hanne Mette Ochsner; Fachner, Jörg

    2016-01-01

    In order to comprehend the impact of music therapy or music therapy processes, a researcher might look for an approach where the topic under investigation can be understood within a broader context. This calls for a rich inclusion of data and consequently a limited number of participants and may be...... achieved through the use of objectivist case study research. The strength of the case study design is that it allows for uncovering or suggesting causal relationships in real-life settings through an intensive and rich collection of data. According to Hilliard (1993), the opposite applies for extensive...... designs, in which a small amount of data is gathered on a large number of subjects. With the richness of data, the intensive design is ―the primary pragmatic reason for engaging in single-case or small N research‖ (p. 374) and for working from an idiographic rather than a nomothetic perspective....

  12. Nesidioblastosis: a case study.

    Science.gov (United States)

    Starbuck, A L

    1997-09-01

    Hypoglycemia is a common problem among neonates. Transient in nature, it usually resolves with an increase in glucose intake. However, as clinicians, we must recognize that prolonged hypoglycemia may be caused by increased insulin production. Nesidioblastosis is one cause of persistent hyperinsulinism of the newborn. This case study reviews fetal physiology, neonatal presentation, and treatment. PMID:9325879

  13. : Case studies: France

    OpenAIRE

    Bonerandi, Emmanuelle; Santamaria, Frédéric

    2005-01-01

    Case studies on territorial governance : urban region of Lyon (France) and the "Pays" policy (France) in the framework of the ESPON 2.3.2 project Études de cas sur la gouvernance territoriale : région urbaine de Lyon et politique des pays

  14. Rotordynamic Stability Case Studies

    OpenAIRE

    Choudhury Pranabesh

    2004-01-01

    In this article case studies are presented involving rotordynamic instability of modern high-speed turbomachinery relating the field data to analytical methods. The studies include oil seal related field problems, instability caused by aerodynamic cross-coupling in high-pressure, high-speed compressors, and hydrodynamic bearing instability resulting in subsynchronous vibration of a high-speed turbocharger. It has been shown that the analytical tools not only help in problem diagnostics, bu...

  15. Prague Case Study Report

    Czech Academy of Sciences Publication Activity Database

    Kostelecký, Tomáš; Patočková, Věra; Illner, Michal; Vobecká, Jana; Čermák, Daniel

    Aarau: Centre for Democracy Studies Aarau (ZDA), 2014 - (Widmer, C.; Kübler, D.), s. 131-177 ISBN 978-3-9524228-2-3 R&D Projects: GA AV ČR IAA700280802 Institutional support: RVO:68378025 Keywords : urban neighbourhods * regeneration * Prague Subject RIV: AD - Politology ; Political Sciences http://www.zdaarau.ch/dokumente/en/ZDA_Working-Papers/No3_RUN_case-studies_2014.pdf

  16. MIDAS case studies

    Energy Technology Data Exchange (ETDEWEB)

    Brusger, E.C.; Farber, M.A.; Sharpe Hayes, M.M.

    1989-07-01

    This series of three case studies illustrates the validity and usefulness of MIDAS, a microcomputer-based tool for integrated resource planning under uncertainty. The first, at Union Electric, serves to test and validate the model and to illustrate its use for demand/supply option evaluation. Focusing on nuclear plant life extension, the Virginia Power case demonstrates the model's extensive detail, particularly in the production cost and financial areas, as well as its flexibility in addressing approximately 70 uncertainty scenarios. Puget Sound Power Light, the third case, used MIDAS for the preparation of its integrated resource plan. A 108-endpoint decision tree illustrates the full power of the decision analysis capability.

  17. Corporate Governance. Case Studies

    OpenAIRE

    Manuel, Eduardo

    2007-01-01

    This paper pretends to do a theoretical approach of Corporate Governance, having as support some case studies about companies like Coca-Cola, Nokia, Microsoft, and Amazon.com. The methodology adopted for this work is based in information from these companies available in their websites and annual reports. I concluded that both companies show the corporate governance components according to their core business and their environmental business.

  18. Case study - Czechoslovakia

    International Nuclear Information System (INIS)

    In the lecture Case Study - Czechoslovakia with the sub-title 'Unified System of Personnel Preparation for Nuclear Programme in Czechoslovakia' the actual status and the current experience of NPP personnel training and preparation in Czechoslovakia are introduced. The above mentioned training system is presented and demonstrated by the story of a proxy person who is going to become shift engineer in a nuclear power plant in Czechoslovakia. (orig./HP)

  19. Case Studies - Cervical Cancer

    Centers for Disease Control (CDC) Podcasts

    2010-10-15

    Dr. Alan Waxman, a professor of obstetrics and gynecology at the University of New Mexico and chair of the American College of Obstetricians and Gynecologists (ACOG) committee for the underserved, talks about several case studies for cervical cancer screening and management.  Created: 10/15/2010 by National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP), Division of Cancer Prevention and Control (DCPC).   Date Released: 6/9/2010.

  20. Reverse Engineering and Software Products Reuse to Teach Collaborative Web Portals: A Case Study with Final-Year Computer Science Students

    Science.gov (United States)

    Medina-Dominguez, Fuensanta; Sanchez-Segura, Maria-Isabel; Mora-Soto, Arturo; Amescua, Antonio

    2010-01-01

    The development of collaborative Web applications does not follow a software engineering methodology. This is because when university students study Web applications in general, and collaborative Web portals in particular, they are not being trained in the use of software engineering techniques to develop collaborative Web portals. This paper…

  1. Case studies in the application of probabilistic safety assessment techniques to radiation sources. Final report of a coordinated research project 2001-2003

    International Nuclear Information System (INIS)

    Radiation sources are used worldwide in many industrial and medical applications. In general, the safety record associated with their use has been very good. However, accidents involving these sources have occasionally resulted in unplanned exposures to individuals. When assessed prospectively, this type of exposure is termed a 'potential exposure'. The International Commission on Radiological Protection (ICRP) has recommended the assessment of potential exposures that may result from radiation sources and has suggested that probabilistic safety assessment (PSA) techniques may be used in this process. Also, Paragraph 2.13 of the International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources (BSS) requires that the authorization process for radiation sources include an assessment of all exposures, including potential exposures, which may result from the use of a radiation source. In light of the ICRP's work described above, and the possibility that PSA techniques could be used in exposure assessments that are required by the BSS, the IAEA initiated a coordinated research project (CRP) to study the benefits and limitations of the application of PSA techniques to radiation sources. The results of this CRP are presented in this publication. It should be noted that these results are based solely on the work performed, and the conclusions drawn, by the research teams involved in this CRP. It is intended that international organizations involved in radiation protection will review the information in this report and will take account of it during the development of guidance and requirements related to the assessment of potential exposures from radiation sources. Also, it is anticipated that the risk insights obtained through the studies will be considered by medical practitioners, facility staff and management, equipment designers, and regulators in their safety management and risk evaluation activities. A draft

  2. Goiania incident case study

    International Nuclear Information System (INIS)

    The reasons for wanting to document this case study and present the findings are simple. According to USDOE technical risk assessments (and our own initial work on the Hanford socioeconomic study), the likelihood of a major accident involving exposure to radioactive materials in the process of site characterization, construction, operation, and closure of a high-level waste repository is extremely remote. Most would agree, however, that there is a relatively high probability that a minor accident involving radiological contamination will occur sometime during the lifetime of the repository -- for example, during transport, at an MRS site or at the permanent site itself during repacking and deposition. Thus, one of the major concerns of the Yucca Mountain Socioeconomic Study is the potential impact of a relatively minor radiation-related accident. A large number of potential impact of a relatively minor radiation-related accident. A large number of potential accident scenarios have been under consideration (such as a transportation or other surface accident which results in a significant decline in tourism, the number of conventions, or the selection of Nevada as a retirement residence). The results of the work in Goiania make it clear, however, that such a significant shift in established social patterns and trends is not likely to occur as a direct outcome of a single nuclear-related accident (even, perhaps, a relatively major one), but rather, are likely to occur as a result of the enduring social interpretations of such an accident -- that is, as a result of the process of understanding, communicating, and socially sustaining a particular set of associations with respect to the initial incident

  3. Natural Learning Case Study Archives

    Science.gov (United States)

    Lawler, Robert W.

    2015-01-01

    Natural Learning Case Study Archives (NLCSA) is a research facility for those interested in using case study analysis to deepen their understanding of common sense knowledge and natural learning (how the mind interacts with everyday experiences to develop common sense knowledge). The database comprises three case study corpora based on experiences…

  4. Termination: A Case Study.

    Science.gov (United States)

    Friedberg, Ahron L

    2015-12-01

    In this article I posit and examine certain criteria and qualities for ending an analysis. The case study describes the end phase of a four-year psychoanalysis in which the patient's decision to move to another area forced the end of his analysis. We continued to explore and work through his core neurotic conflicts that included issues of competitive rivalry, dominance and submission, control, and anxiety about birth and death. A shift in the transference from me as a negative father to me as a supportive but competitive older brother was also examined in the context of ending treatment as well as other aspects of the transference. In addition, we analyzed the meaning of his ending treatment based on an extra-analytic circumstance. In discussing this phase of treatment, the definition and history of the term "termination" and its connotations are reviewed. Various criteria for completing an analysis are examined, and technical observations about this phase of treatment are investigated. It was found that while a significant shift in the transference occurred in this phase of the patient's analysis, conflicts related to the transference were not "resolved" in the classical sense. Terminating treatment was considered as a practical matter in which the patient's autonomy and sense of choice were respected and analyzed. PMID:26583444

  5. Teaching Pharmacology by Case Study.

    Science.gov (United States)

    Jordan, Sue

    1997-01-01

    Using pharmacology case studies with nursing students encourages theory-practice links and infuses real-life content. Cases provide rich qualitative data for evaluating curriculum. However, they are not a substitute for evidence-based practice. (SK)

  6. Intercultural Communicative Case Study

    Institute of Scientific and Technical Information of China (English)

    吴冬梅

    2009-01-01

    The essay is mainly about the author's comprehension of cultural differences and intercultural communication after reading the book Communication Between Cultures.In addition,the author also analyses three cases with the theories and approaches mentioned in Communication Between Cultures.

  7. Repository shafts relocation study: Final report

    International Nuclear Information System (INIS)

    This study was undertaken to reconfigure the sub-surface layout so as to move the shaft pillar out of the area of the probable maximum flood (PMF). The reconfiguration consisted of two major changes in the layout. First, two emplacement entries at the south end of the repository were moved into an area west of the shaft pillar. Secondly, the width of the shaft pillar was reduced from 1800 ft to 1200 ft. This change was based on more detailed scoping studies than had been conducted during SCP-CD. Finite element analysis and calculation of shaft pillar size by empirical methods, data evaluation from operating evaporite mines, thermomechanical analysis, and review of damaged mine shafts all went into this scoping study. It was assumed that there are tolerable vertical and horizontal displacements to shaft linings and surface facilities and that these structures can be designed and constructed to withstand these deformations. In a preliminary revised underground layout, the exploratory shafts (ESs) were 369 ft west of the locations identified in the Draft Environmental Assessment (DEA). However, there was a desire to keep them in the DEA, hence the final Environmental Assessment (EA, DOE, 1986), locations. This was accomplished by moving shaft A and its connecting entries 625 ft to the east and making certain other modifications to the layout. This change would require excavating an additional 40,000 tons of salt and a 1.2 month extension of pre-emplacement development activity. 12 ref., 19 figs., 3 tabs

  8. CAT: A CASE STUDY OF GRE

    Institute of Scientific and Technical Information of China (English)

    WangZe; ChenJiliang

    2004-01-01

    The Computer Adaptive Testing (CAT) has developedsuccessfully with its adoption by testing agencies. The authors ofthis paper point out the advantages and disadvantages of CATsand then take GRE as a case study to probe into the scoringalgorithm in CAT. By analyzing some typical score reports ofcomputer-adaptive GRE General Test, they study some majorfactors affecting the final score such as the percentage ofcorrectness and difficulty levels.

  9. Case histories of West Valley spent fuel shipments: Final report

    International Nuclear Information System (INIS)

    In 1983, NRC/FC initiated a study on institutional issues related to spent fuel shipments originating at the former spent fuel processing facility in West Valley, New York. FC staff viewed the shipment campaigns as a one-time opportunity to document the institutional issues that may arise with a substantial increase in spent fuel shipping activity. NRC subsequently contracted with the Aerospace Corporation for the West Valley Study. This report contains a detailed description of the events which took place prior to and during the spent fuel shipments. The report also contains a discussion of the shipment issues that arose, and presents general findings. Most of the institutional issues discussed in the report do not fall under NRC's transportation authority. The case histories provide a reference to agencies and other institutions that may be involved in future spent fuel shipping campaigns. 130 refs., 7 figs., 19 tabs

  10. Case histories of West Valley spent fuel shipments: Final report

    Energy Technology Data Exchange (ETDEWEB)

    1987-01-01

    In 1983, NRC/FC initiated a study on institutional issues related to spent fuel shipments originating at the former spent fuel processing facility in West Valley, New York. FC staff viewed the shipment campaigns as a one-time opportunity to document the institutional issues that may arise with a substantial increase in spent fuel shipping activity. NRC subsequently contracted with the Aerospace Corporation for the West Valley Study. This report contains a detailed description of the events which took place prior to and during the spent fuel shipments. The report also contains a discussion of the shipment issues that arose, and presents general findings. Most of the institutional issues discussed in the report do not fall under NRC's transportation authority. The case histories provide a reference to agencies and other institutions that may be involved in future spent fuel shipping campaigns. 130 refs., 7 figs., 19 tabs.

  11. Case Study: Case Studies and the Flipped Classroom

    Science.gov (United States)

    Herreid, Clyde Freeman; Schiller, Nancy A.

    2013-01-01

    This column provides original articles on innovations in case study teaching, assessment of the method, as well as case studies with teaching notes. This month's issue discusses the positive and negative aspects of the "flipped classroom." In the flipped classroom model, what is normally done in class and what is normally done as…

  12. Customs Modernization Initiatives : Case Studies

    OpenAIRE

    De Wulf, Luc; José B. Sokol

    2004-01-01

    This volume presents case studies of customs modernization initiatives in eight developing countries: Bolivia, Ghana, Morocco, Mozambique, Peru, the Philippines, Turkey, and Uganda. The purpose of these case studies was to obtain a firsthand view of how these countries undertook customs reforms and to assess their success. The overall lessons learned from these studies are presented in cha...

  13. Theory Testing Using Case Studies

    DEFF Research Database (Denmark)

    Møller, Ann-Kristina Løkke; Dissing Sørensen, Pernille

    2014-01-01

    The appropriateness of case studies as a tool for theory testing is still a controversial issue, and discussions about the weaknesses of such research designs have previously taken precedence over those about its strengths. The purpose of the paper is to examine and revive the approach of theory...... testing using case studies, including the associated research goal, analysis, and generalisability. We argue that research designs for theory testing using case studies differ from theorybuilding case study research designs because different research projects serve different purposes and follow different...

  14. Automated diagnostics scoping study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Quadrel, R.W.; Lash, T.A.

    1994-06-01

    The objective of the Automated Diagnostics Scoping Study was to investigate the needs for diagnostics in building operation and to examine some of the current technologies in automated diagnostics that can address these needs. The study was conducted in two parts. In the needs analysis, the authors interviewed facility managers and engineers at five building sites. In the technology survey, they collected published information on automated diagnostic technologies in commercial and military applications as well as on technologies currently under research. The following describe key areas that the authors identify for the research, development, and deployment of automated diagnostic technologies: tools and techniques to aid diagnosis during building commissioning, especially those that address issues arising from integrating building systems and diagnosing multiple simultaneous faults; technologies to aid diagnosis for systems and components that are unmonitored or unalarmed; automated capabilities to assist cause-and-effect exploration during diagnosis; inexpensive, reliable sensors, especially those that expand the current range of sensory input; technologies that aid predictive diagnosis through trend analysis; integration of simulation and optimization tools with building automation systems to optimize control strategies and energy performance; integration of diagnostic, control, and preventive maintenance technologies. By relating existing technologies to perceived and actual needs, the authors reached some conclusions about the opportunities for automated diagnostics in building operation. Some of a building operator`s needs can be satisfied by off-the-shelf hardware and software. Other needs are not so easily satisfied, suggesting directions for future research. Their conclusions and suggestions are offered in the final section of this study.

  15. Additional EIPC Study Analysis. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Hadley, Stanton W [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Gotham, Douglas J. [Purdue Univ., West Lafayette, IN (United States); Luciani, Ralph L. [Navigant Consultant Inc., Suwanee, GA (United States)

    2014-12-01

    Between 2010 and 2012 the Eastern Interconnection Planning Collaborative (EIPC) conducted a major long-term resource and transmission study of the Eastern Interconnection (EI). With guidance from a Stakeholder Steering Committee (SSC) that included representatives from the Eastern Interconnection States Planning Council (EISPC) among others, the project was conducted in two phases. Phase 1 involved a long-term capacity expansion analysis that involved creation of eight major futures plus 72 sensitivities. Three scenarios were selected for more extensive transmission- focused evaluation in Phase 2. Five power flow analyses, nine production cost model runs (including six sensitivities), and three capital cost estimations were developed during this second phase. The results from Phase 1 and 2 provided a wealth of data that could be examined further to address energy-related questions. A list of 14 topics was developed for further analysis. This paper brings together the earlier interim reports of the first 13 topics plus one additional topic into a single final report.

  16. Theoretical studies of controlled fusion: Final report

    International Nuclear Information System (INIS)

    This report summarizes the results of a study of low frequency stability in the Field Reversed Configuration (FRC), with emphasis on the transport resulting from this stability behavior. Anomalous transport plays an obvious role in the confinement physics of the Field Reversed Configuration. Other anomalies are also observed, including an apparent absence of MHD instability and, in some cases, of lower-hybrid-drift instability. In current FRC experiments at LANL and Spectra Technology, particle, energy, and magnetic flux loss are observed to differ from classical prediction, both in size and in scaling. Early models proposed to explain that transport properties were based on anomalous radial loss of plasma particles in the vicinity of the separatrix between closed and open field lines produced by lower-hybrid instabilities. Our present work has shown that low frequency drift waves were also unstable in FRC, and produce energy and flux loss consistent with observation. 11 refs., 5 figs., 2 tabs

  17. NLRB CATS Final C-Case Data in XML - 2002

    Data.gov (United States)

    National Labor Relations Board — NLRB C-Case (Unfair Labor Practice) data from CATS (Case Activity Tracking System) for the period of 01/01/2002 through 12/31/2002. This dataset represents all data...

  18. NLRB CATS Final C-Case Data in XML - 2001

    Data.gov (United States)

    National Labor Relations Board — NLRB C-Case (Unfair Labor Practice) data from CATS (Case Activity Tracking System) for the period of 01/01/2001 through 12/31/2001. This dataset represents all data...

  19. NLRB CATS Final C-Case Data in XML - 2008

    Data.gov (United States)

    National Labor Relations Board — NLRB C-Case (Unfair Labor Practice) data from CATS (Case Activity Tracking System) for the period of 01/01/2008 through 12/31/2008. This dataset represents all data...

  20. NLRB CATS Final C-Case Data in XML - 2004

    Data.gov (United States)

    National Labor Relations Board — NLRB C-Case (Unfair Labor Practice) data from CATS (Case Activity Tracking System) for the period of 01/01/2004 through 12/31/2004. This dataset represents all data...

  1. NLRB CATS Final C-Case Data in XML - 2005

    Data.gov (United States)

    National Labor Relations Board — NLRB C-Case (Unfair Labor Practice) data from CATS (Case Activity Tracking System) for the period of 01/01/2005 through 12/31/2005. This dataset represents all data...

  2. NLRB CATS Final C-Case Data in XML - 2010

    Data.gov (United States)

    National Labor Relations Board — NLRB C-Case (Unfair Labor Practice) data from CATS (Case Activity Tracking System) for the period of 01/01/2010 through 12/31/2010. This dataset represents all data...

  3. NLRB CATS Final C-Case Data in XML - 2009

    Data.gov (United States)

    National Labor Relations Board — NLRB C-Case (Unfair Labor Practice) data from CATS (Case Activity Tracking System) for the period of 01/01/2009 through 12/31/2009. This dataset represents all data...

  4. NLRB CATS Final C-Case Data in XML - 2007

    Data.gov (United States)

    National Labor Relations Board — NLRB C-Case (Unfair Labor Practice) data from CATS (Case Activity Tracking System) for the period of 01/01/2007 through 12/31/2007. This dataset represents all data...

  5. NLRB CATS Final C-Case Data in XML - 2003

    Data.gov (United States)

    National Labor Relations Board — NLRB C-Case (Unfair Labor Practice) data from CATS (Case Activity Tracking System) for the period of 01/01/2003 through 12/31/2003. This dataset represents all data...

  6. NLRB CATS Final C-Case Data in XML - 2011

    Data.gov (United States)

    National Labor Relations Board — NLRB C-Case (Unfair Labor Practice) data from CATS (Case Activity Tracking System) for the period of 01/01/2011 through 12/31/2011. This dataset represents all data...

  7. Case management's value is finally recognized. What happens now? .

    Science.gov (United States)

    2015-10-01

    In recent years, case management has been recognized as a key in improving healthcare quality and reducing costs, but while hospitals are giving case managers more responsibilities, many administrators are not approving an increase in staff to handle the extra work. Case managers can help their hospital succeed with the Centers for Medicare & Medicaid Services' Value-based Purchasing program, the readmission reduction program, and bundled payments. Case management directors should make sure the hospital's senior leadership understands the roles and responsibilities of case managers and how their interventions can affect outcomes and the bottom line. The number of caseloads depends on the case management model, the responsibilities of case managers, and whether they have assistants or case management extenders who can take over some tasks and allow the licensed staff to work at the top of their licenses. Don't let technology replace communication and patient-centered interactions. PMID:26427224

  8. NLRB CATS Final C-Case Data in XML - 2006

    Data.gov (United States)

    National Labor Relations Board — NLRB C-Case (Unfair Labor Practice) data from CATS (Case Activity Tracking System) for the period of 01/01/2006 through 12/31/2006. This dataset represents all data...

  9. Pipeline bottoming cycle study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1980-06-01

    The technical and economic feasibility of applying bottoming cycles to the prime movers that drive the compressors of natural gas pipelines was studied. These bottoming cycles convert some of the waste heat from the exhaust gas of the prime movers into shaft power and conserve gas. Three typical compressor station sites were selected, each on a different pipeline. Although the prime movers were different, they were similar enough in exhaust gas flow rate and temperature that a single bottoming cycle system could be designed, with some modifications, for all three sites. Preliminary design included selection of the bottoming cycle working fluid, optimization of the cycle, and design of the components, such as turbine, vapor generator and condensers. Installation drawings were made and hardware and installation costs were estimated. The results of the economic assessment of retrofitting bottoming cycle systems on the three selected sites indicated that profitability was strongly dependent upon the site-specific installation costs, how the energy was used and the yearly utilization of the apparatus. The study indicated that the bottoming cycles are a competitive investment alternative for certain applications for the pipeline industry. Bottoming cycles are technically feasible. It was concluded that proper design and operating practices would reduce the environmental and safety hazards to acceptable levels. The amount of gas that could be saved through the year 2000 by the adoption of bottoming cycles for two different supply projections was estimated as from 0.296 trillion ft/sup 3/ for a low supply projection to 0.734 trillion ft/sup 3/ for a high supply projection. The potential market for bottoming cycle equipment for the two supply projections varied from 170 to 500 units of varying size. Finally, a demonstration program plan was developed.

  10. Case Studies on Sustainable Buildings

    OpenAIRE

    Hui, Sam CM

    2005-01-01

    This web site is developed with the aim to promote sustainable design and planning of buildings. A knowledge base of case studies and resources has been established to illustrate the sustainable design strategies and features in realistic building projects all over the world. The database of case studies can be searched by project names, locations, design strategies and design features.

  11. Three Community College Case Studies

    Science.gov (United States)

    Wojtysiak, Joseph; Sutton, William J., II; Wright, Tommy; Brantley, Linda

    2011-01-01

    This article presents three case studies that focus on specific projects that are underway or have been completed. In the first case study, Joseph Wojtysiak and William J. Sutton, II discuss the Green Center of Central Pennsylvania, which is designed to serve as the state's preeminent source for education, training and public information about…

  12. The Big Read: Case Studies

    Science.gov (United States)

    National Endowment for the Arts, 2009

    2009-01-01

    The Big Read evaluation included a series of 35 case studies designed to gather more in-depth information on the program's implementation and impact. The case studies gave readers a valuable first-hand look at The Big Read in context. Both formal and informal interviews, focus groups, attendance at a wide range of events--all showed how…

  13. Kickstarter - A Case Study

    OpenAIRE

    Willumsen, Ea Christina; Byg-Fabritius, Edith Ursula Tvede

    2013-01-01

    This paper is an investigation of the online crowdfunding platform Kickstarter, and discusses what makes a Kickstarter campaign successful. Two previous Kickstarter campaigns have been debated in focus groups interviews, as the basis of the study is a reception analysis of two focus group interviews. Ee apply theories from Schrøder (2000) and Batey (2008) to our analysis to study how the campaigns appeal to their backers. By drawing on ideas from Rogers (2003) and Pine & Gilmore (1998), we fu...

  14. Case study - Argentina

    International Nuclear Information System (INIS)

    Antecedents and experience of nuclear activities in Argentina; the Atomic Energy Commission (CNEA). First development and research activities. Research reactors and radioisotopes plants. Health physics and safety regulations. - Feasibility studies for the first nuclear power plant. Awarding the first plant CNA I (Atucha I). Relevant data related to the different project stages. Plant performance. - Feasibility study for the second nuclear power plant. Awarding the second plant CNE (Central Nuclear Embalse). Relevant data related to established targets. Differences compared with the first station targets. Local participation. Plant performance. (orig./GL)

  15. Technical study gas storage. Final report

    International Nuclear Information System (INIS)

    This study will answer the following questions: (a) For what uses was the storage facility designed and for what use is it currently applied? Provide an overview of the technical data per gas storage facility: for instance, what is its capacity, volume, start-up time, etc.; (b) How often has this facility been used during the past 10 years? With what purpose was the facility brought into operation at the time? How much gas was supplied at the time from the storage facility?; (c) Given the characteristics and the use of the storage facility during the past 10 years and projected gas consumption in the future, how will the storage facility be used in the future?; (d) Are there other uses for which the gas storage facility can be deployed, or can a single facility be deployed for numerous uses? What are the technical possibilities in such cases? Questions (a) and (b) are answered separately for every storage facility. Questions (c) and (d) in a single chapter each (Chapter 2 and 3). An overview of the relevant storage data relating to current use, use in the last 10 years and use in future is given in the Annex

  16. Shuttle Case Study Collection Website Development

    Science.gov (United States)

    Ransom, Khadijah S.; Johnson, Grace K.

    2012-01-01

    As a continuation from summer 2012, the Shuttle Case Study Collection has been developed using lessons learned documented by NASA engineers, analysts, and contractors. Decades of information related to processing and launching the Space Shuttle is gathered into a single database to provide educators with an alternative means to teach real-world engineering processes. The goal is to provide additional engineering materials that enhance critical thinking, decision making, and problem solving skills. During this second phase of the project, the Shuttle Case Study Collection website was developed. Extensive HTML coding to link downloadable documents, videos, and images was required, as was training to learn NASA's Content Management System (CMS) for website design. As the final stage of the collection development, the website is designed to allow for distribution of information to the public as well as for case study report submissions from other educators online.

  17. Geostatistical case studies

    International Nuclear Information System (INIS)

    The objective of this volume of contributed chapters is to present a series of applications of geostatistics. These range from a careful variographic analysis on uranium data, through detailed studies on geologically complex deposits, right up to the latest nonlinear methods applied to deposits with highly skewed data contributions. Applications of new techniques such as the external drift method for combining well data with seismic information have also been included. The volume emphasizes geostatistics in practice. Notation has been kept to a minimum and mathematical details have been relegated to annexes

  18. Case Studies in Science Ethics

    Science.gov (United States)

    Williams, Karen

    2010-03-01

    Everyone in science should have ethics education training. I have seen graduate students taken advantage of by their mentors. Many of us have seen misconduct...but what should we do about it? Young scientists are often unaware of the rules in science and make mistakes because of their ignorance of the rules in that particular field of study. Then there are an increasing number of cases in the news of overt cases of misrepresentation in science. All are welcome to attend this discussion of case studies. A case study on topics such as: how to treat data properly, how our values in science affect our work, who gets authorship on scientific papers, who is first author on a paper, what you should do if you uncover misconduct or plagiarism in your university, and we will discuss the scientist's role in society. This will be a painless, non-confrontational small group, then large group discussion of each case

  19. Teaching astronomy with case studies

    Science.gov (United States)

    Slater, Timothy F.

    2015-11-01

    Breaking the students into small, collaborative learning groups to solve a meaningful task together is one of the most successful and fully evaluated teaching techniques implemented over the last century. Although there are many ways to accomplish small group learning, a long-standing and consistently successful collaborative class activity is to use the case study teaching strategy. The use of case studies is common in medical schools and law schools, but not so common in the teaching of astronomy. Case studies create meaningful conversations among students and with the professor by focusing on life-like dilemmas to be solved. Case study tasks ask audience members to synthesize several ideas or evaluate scenarios that have not been explicitly presented to them in the lecture or in available readings.

  20. Nasopharyngeal Case-Control Study

    Science.gov (United States)

    A case-control study conducted in Taiwan between 1991-1994 among approximately 1,000 individuals to examine the role of viral, environmental, and genetic factors associated with the development of nasopharyngeal carcinoma

  1. HYDROGEOLOGIC CASE STUDIES (CHICAGO, IL)

    Science.gov (United States)

    Hydrogeology is the foundation of subsurface site characterization for evaluations of monitored natural attenuation (MNA). Three case studies are presented. Examples of the potentially detrimental effects of drilling additives on ground-water samples from monitoring wells are d...

  2. HYDROGEOLOGIC CASE STUDIES (DENVER PRESENTATION)

    Science.gov (United States)

    Hydrogeology is the foundation of subsurface site characterization for evaluations of monitored natural attenuation (MNA). Three case studies are presented. Examples of the potentially detrimental effects of drilling additives on ground-water samples from monitoring wells are d...

  3. Hydrogeologic Case Studies (Seattle, WA)

    Science.gov (United States)

    Hydrogeology is the foundation of subsurface site characterization for evaluations of monitored natural attenuation (MNA). Three case studies are presented. Examples of the potentially detrimental effects of drilling additives on ground-water samples from monitoring wells are d...

  4. Medical waste irradiation study. Final report

    International Nuclear Information System (INIS)

    The North Star Research Corporation Medical Waste project is described in this report, with details of design, construction, operation, and results to date. The project began with preliminary design of the accelerator. The initial design was for a single accelerator chamber with a vacuum tube cavity driver built into the chamber itself, rather than using a commercial tube separate from the RF accelerator. The authors believed that this would provide more adjustability and permit better coupling to be obtained. They did not have sufficient success with that approach, and finally completed the project using a DC accelerator with a unique new scanning system to irradiate the waste

  5. Evaluation of the contribution of radiological imaging to the final diagnosis in medical case reports

    International Nuclear Information System (INIS)

    To evaluate the clinical value and impact of radiological imaging in published medial case reports. We analysed 671 consecutively published case reports of a peer-reviewed medical journal for case reports. The general use of radiological imaging as well as the specific imaging modality used in each case (ultrasound, x-ray, fluoroscopy, CT, MRI) was documented, and most importantly the 'final problem solver', i.e. the diagnostic modality giving the final clue to the patient's diagnosis, was identified. In 511 of 671 (76.1 %) analysed case reports at least one radiological modality was used in the diagnostic cascade. In 28.6 % of all cases the final diagnosis was achieved by radiological imaging. All other cases were solved by the patient's history and physical examination (15.2 %), histology (12.4 %), and blood analysis (9.6 %). When radiology was the 'final problem solver', it was mainly CT (51.6 %) and MRI (30.6 %). In 52.2 % of the case reports the radiological image was included in the article. In case reports published in a prominent general medical journal radiological imaging is an important key player in the diagnostic process. In many cases, it is also the diagnostic tool which ultimately leads to determining the final diagnosis. (orig.)

  6. Evaluation of the contribution of radiological imaging to the final diagnosis in medical case reports

    Energy Technology Data Exchange (ETDEWEB)

    Wiesinger, Isabel; Scharf, Gregor; Platz, Natascha; Dendl, Lena M.; Stroszczynski, Christian; Schreyer, Andreas G. [University Hospital Regensburg, Institute of Radiology, Regensburg (Germany); Pawlik, Michael T. [Intensive Care and Emergency Medicine, Institute of Anaesthesiology, Regensburg (Germany)

    2015-05-01

    To evaluate the clinical value and impact of radiological imaging in published medial case reports. We analysed 671 consecutively published case reports of a peer-reviewed medical journal for case reports. The general use of radiological imaging as well as the specific imaging modality used in each case (ultrasound, x-ray, fluoroscopy, CT, MRI) was documented, and most importantly the 'final problem solver', i.e. the diagnostic modality giving the final clue to the patient's diagnosis, was identified. In 511 of 671 (76.1 %) analysed case reports at least one radiological modality was used in the diagnostic cascade. In 28.6 % of all cases the final diagnosis was achieved by radiological imaging. All other cases were solved by the patient's history and physical examination (15.2 %), histology (12.4 %), and blood analysis (9.6 %). When radiology was the 'final problem solver', it was mainly CT (51.6 %) and MRI (30.6 %). In 52.2 % of the case reports the radiological image was included in the article. In case reports published in a prominent general medical journal radiological imaging is an important key player in the diagnostic process. In many cases, it is also the diagnostic tool which ultimately leads to determining the final diagnosis. (orig.)

  7. Sternocleidomastoid syndrome: a case study

    OpenAIRE

    Missaghi, Babak

    2004-01-01

    This article presents a case study of a patient diagnosed with dysfunction of the sternocleidomastoid (SCM) muscle, a condition which can result in head and face pain, nausea, dizziness, coryza, and lacrimation. In this particular case, the SCM muscle had developed tightness and weakness with presence of multiple trigger points within both heads. A combination of passive and active treatments were utilized to successfully treat this condition.

  8. Kenya Groundwater Governance Case Study

    OpenAIRE

    Mumma, Albert; Lane, Michael; Kairu, Edward; Tuinhof, Albert; Hirji, Rafik

    2011-01-01

    This report presents a case study on groundwater governance in Kenya. The objectives of the study were to: (a) describe groundwater resource and socioeconomic settings for four selected aquifers; (b) describe governance arrangements for groundwater management in Kenya; and (c) identify the relevance of these arrangements for planning and implementing climate change mitigation measures. The ...

  9. Case Study on Logistics Performance

    OpenAIRE

    Sorooshian, Shahryar; Jambulingam, Manimekalai; Dodangeh, Javad

    2013-01-01

    The paper presents research carried out at a medium‐size manufacturing organization in east Asia. The study tries to highlight the importance of supply chain management; specifically, our aim for this study is to understand logistics and performance measurement in the logistics and supply chain, and we include a theoretical discussion of online data collected and a case study of the logistic performance of a real organization. The study also examines the performance of the selected company, i...

  10. eCompetence Case Studies

    DEFF Research Database (Denmark)

    Jensen, Helle Bækkelund

    2006-01-01

    In this paper we present some details of the processes undertaken in the European eCompetence Initiative. We present two illustrative and representative case studies. The research aims to identify and understand patterns of individual and organisational eCompetence approaches.......In this paper we present some details of the processes undertaken in the European eCompetence Initiative. We present two illustrative and representative case studies. The research aims to identify and understand patterns of individual and organisational eCompetence approaches....

  11. Case Study on Logistics Performance

    Directory of Open Access Journals (Sweden)

    Shahryar Sorooshian

    2013-05-01

    Full Text Available The paper presents research carried out at a medium‐size manufacturing organization in east Asia. The study tries to highlight the importance of supply chain management; specifically, our aim for this study is to understand logistics and performance measurement in the logistics and supply chain, and we include a theoretical discussion of online data collected and a case study of the logistic performance of a real organization. The study also examines the performance of the selected company, identifies the problems and provides recommendations for improvements. This study can be a guide for business advisers and those interested in analysing company performance, especially from a logistics viewpoint. We also suggest the methodology of this case study for those who want to have a better understanding of a business environment before starting their own business, or for benchmarking practice during strategic planning.

  12. Technology transfer pilot study. Final report

    International Nuclear Information System (INIS)

    Four specific technologies based on the Initial Fusion Program were targeted for this initial study. The areas chosen were the CO2 laser, high pressure from cleaning, video multiplexer, and plans-optics polishing. The study concluded that both Government and Industry are willing and anxious to promote and to reap the benefits of technology transfer. Recommendations were made in the areas of patent policy, documentation procedures in the transfer process, awareness training, and expansion of the scope of the study. 18 refs

  13. 90% Compliance Pilot Studies Final Report

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-06-01

    In early 2010, the U.S. Department of Energy (DOE) announced an opportunity for states to participate in energy code compliance evaluation pilot studies. DOE worked with five Regional Energy Efficiency Organizations (REEOs, formerly referred to as Energy Efficiency Partnerships, or EEPs) to fund pilot studies covering nine states. This report details conclusions stated in individual state reports, as well as conclusions drawn by DOE based on their oversight of the pilot studies, and based on discussions held with the REEOs and representatives from the pilot study states and their contractors.

  14. Canister storage building trade study. Final report

    International Nuclear Information System (INIS)

    This study was performed to evaluate the impact of several technical issues related to the usage of the Canister Storage Building (CSB) to safely stage and store N-Reactor spent fuel currently located at K-Basin 100KW and 100KE. Each technical issue formed the basis for an individual trade study used to develop the ROM cost and schedule estimates. The study used concept 2D from the Fluor prepared ''Staging and Storage Facility (SSF) Feasibility Report'' as the basis for development of the individual trade studies

  15. Teaching Case: Enterprise Architecture Specification Case Study

    Science.gov (United States)

    Steenkamp, Annette Lerine; Alawdah, Amal; Almasri, Osama; Gai, Keke; Khattab, Nidal; Swaby, Carval; Abaas, Ramy

    2013-01-01

    A graduate course in enterprise architecture had a team project component in which a real-world business case, provided by an industry sponsor, formed the basis of the project charter and the architecture statement of work. The paper aims to share the team project experience on developing the architecture specifications based on the business case…

  16. Studies in genetic discrimination. Final progress report

    Energy Technology Data Exchange (ETDEWEB)

    1994-06-01

    We have screened 1006 respondents in a study of genetic discrimination. Analysis of these responses has produced evidence of the range of institutions engaged in genetic discrimination and demonstrates the impact of this discrimination on the respondents to the study. We have found that both ignorance and policy underlie genetic discrimination and that anti-discrimination laws are being violated.

  17. Gasohol: economic feasibility study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    David, M. L.; Hammaker, G. S.; Buzenberg, R. J.; Wagner, J. P.

    1978-07-01

    This report was prepared by Development Planning and Research Associates, Inc. under a contract with the Energy Research and Development Center of the University of Nebraska in cooperation with the Agricultural Products Industrial Utilization Committee and the State of Nebraska. Funding for this study was provided to the Energy Research and Development Center by the U.S. Department of Energy and the Old West Regional Commission. The primary objective of the study was to: determine the fiscal and market conditions under which the production of gasohol would be profitable for private producers. For purposes of this study, gasohol is a motor fuel consisting of 10 percent agriculturally-derived anhydrous ethanol and 90 percent unleaded gasoline. The study assumes that gasohol can be a fuel substitute for gasoline; indeed, the cost of gasoline will significantly influence that for gasohol. Gasoline prices are determined by factors external to ethanol; thus, the economic feasibility study of gasohol is in large part an economic feasibility study of fuel-grade ethanol production. More specifically, the study examined the following: the technical aspects of distributing, marketing, and using gasohol; the costs of the distribution and marketing of ethanol and gasohol; the energy balance of ethanol production; the cost of producing ethanol; the factors influencing ehtanol plant size and location; and the conditions that would make ethanol economicaly feasible for private producers.

  18. Model-based studies into ground water movement, with water density depending on salt content. Case studies and model validation with respect to the long-term safety of radwaste repositories. Final report

    International Nuclear Information System (INIS)

    Near-to-reality studies into ground water movement in the environment of planned radwaste repositories have to take into account that the flow conditions are influenced by the water density which in turn depends on the salt content. Based on results from earlier studies, computer programs were established that allow computation and modelling of ground water movement in salt water/fresh water systems, and the programs were tested and improved according to progress of the studies performed under the INTRAVAL international project. The computed models of ground water movement in the region of the Gorlebener Rinne showed for strongly simplified model profiles that the developing salinity distribution varies very sensitively in response to the applied model geometry, initial input data for salinity distribution, time frame of the model, and size of the transversal dispersion length. The WIPP 2 INTRAVAL experiment likewise studied a large-area ground water movement system influenced by salt water. Based on the concept of a hydraulically closed, regional ground water system (basin model), a sectional profile was worked out covering all relevant layers of the cap rock above the salt formation planned to serve as a repository. The model data derived to describe the salt water/fresh water movements in this profile resulted in essential enlargements and modifications of the ROCKFLOW computer program applied, (relating to input data for dispersion modelling, particle-tracker, computer graphics interface), and yielded important information for the modelling of such systems (relating to initial pressure data at the upper margin, network enhancement for important concentration boundary conditions, or treatment of permeability contrasts). (orig.)

  19. Deep Disposal. Preliminary Study Storuman. Final Report

    International Nuclear Information System (INIS)

    This is the first study of a potential site for a swedish repository for high-level radioactive waste, based on already existing information. The study was performed in close contact with local political and administrative representatives, and produced about 30 technical reports. The present report gives a review of the findings, and discusses the positive and negative effects of a localization to Storuman. Overall, it is concluded that there is a good potential for building the repository at Storuman, but that further studies of the rock down to a depth of 500 m are needed. Similar studies at other sites will however first be made, before any decisions on a more detailed examination. 84 refs, 32 figs

  20. 2006 Final Transmission Proposal: Revenue Requirements Study.

    Energy Technology Data Exchange (ETDEWEB)

    United States. Bonneville Power Administration.

    2005-06-01

    The purpose of the Revenue Requirement Study (Study) is to establish the level of revenues needed from rates for Bonneville Power Administration's (BPA's) transmission and ancillary services to recover, in accordance with sound business principles, costs associated with the transmission of electric power over the Federal Columbia River Transmission System (FCRTS). The FCRTS is part of the larger Federal Columbia River Power System (FCRPS) which also includes the hydroelectric, multipurpose facilities constructed and operated by the U.S. Army Corps of Engineers and the Bureau of Reclamation in the Pacific Northwest. The FCRPS costs that are not included in the FCRTS costs are funded and repaid through BPA power rates. The transmission revenue requirements herein include: recovery of the Federal investment in transmission and transmission-related assets; the operations and maintenance (O&M) and other annual expenses associated with the provision of transmission and ancillary services; the cost of generation inputs for ancillary services and other between business-line services necessary for the transmission of power; and all other transmission-related costs incurred by the Administrator. The cost evaluation period for this rate proposal includes Fiscal Years (FYs) 2005-2007, the period extending from the last year for which historical information is available through the proposed rate test period. The Study includes the transmission revenue requirements for the rate test period, FYs 2006-2007 (Rate Period) and the results of transmission repayment studies. This Study outlines the policies, forecasts, assumptions, and calculations used to determine BPA's transmission revenue requirements. Legal requirements are summarized in Chapter 5 of this Study. The Revenue Requirement Study Documentation (Documentation), TR-06-FS-BPA-01A, contains key technical assumptions and calculations, the results of the transmission repayment studies, and a further

  1. The reflexive case study method

    DEFF Research Database (Denmark)

    Rittenhofer, Iris

    2015-01-01

    This paper extends the international business research on small to medium-sized enterprises (SME) at the nexus of globalization. Based on a conceptual synthesis across disciplines and theoretical perspectives, it offers management research a reflexive method for case study research of postnational...

  2. Barwood CNG Cab Fleet Study: Final Results

    Energy Technology Data Exchange (ETDEWEB)

    Whalen, P.; Kelly, K.; John, M.

    1999-05-03

    This report describes a fleet study conducted over a 12-month period to evaluate the operation of dedicated compress natural gas (CNG) Ford Crown Victoria sedans in a taxicab fleet. In the study, we assess the performance and reliability of the vehicles and the cost of operating the CNG vehicles compared to gasoline vehicles. The study results reveal that the CNG vehicles operated by this fleet offer both economic and environmental advantages. The total operating costs of the CNG vehicles were about 25% lower than those of the gasoline vehicles. The CNG vehicles performed as well as the gasoline vehicles, and were just as reliable. Barwood representatives and drivers have come to consider the CNG vehicles an asset to their business and to the air quality of the local community.

  3. Energy-deposition studies. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Vroom, D.A.

    1976-08-31

    Studies on energy deposition in materials by high energy radiation based on excitation measurements and measurements of secondary electron emission from the ionization process are reported. The experimental apparatus used for studying excitation in low-energy electron collisions with hydrogen and deuterium is described. Differential angular distribution measurements of photoelectrons emitted from water vapor and nitric oxide are reported. Also, electron impact secondary electron differential cross sections are presented for hydrogen, methane, acetylene, ethylene, ethane, propane, and butane at 1, 2.5, 5, 7.5, and 10 keV. (WHK)

  4. Final version dry cask storage study

    International Nuclear Information System (INIS)

    This report was prepared in response to Section 5064 of the Nuclear Waste Policy Amendments Act of 1987 (the Amendments Act--Public Law 100-203), which directs the Secretary of Energy to conduct a study of the use of dry-cask-storage technology for storing spent fuel at the sites of civilian nuclear reactors until a geologic repository is available. In conducting this study, whose results are being reported to the Congress, the Secretary was to consider such factors as costs, effects on human health and the environment, and the extent to which the Nuclear Waste Fund can and should be used to provide funds for at-reactor storage. In addition, the Secretary was to consult with the Nuclear Regulatory Commission (NRC), include NRC comments in the report, and solicit the views of State and local governments and the public. The study performed in response to these requirements was based largely on data published by the DOE or the NRC or included in documents issued by the DOE. Among the DOE documents are the 1987 MRS proposal to the Congress and a subsequent report, prepared to supply the Congress with additional information on the MRS facility. Because in evaluating dry storage at reactor sites it is necessary to take into account other options for meeting storage needs, this study covered all forms of at-reactor storage. 107 refs., 15 figs., 10 tabs

  5. Laser fusion system design study. Final report

    International Nuclear Information System (INIS)

    The following studies were completed: (1) The synthesis of a pointing/control system compatible with existing and advanced laser opto-mechanical configurations. (2) Attainment of the required pointing angle, longitudinal focus, and differential pathlength accuracies. (3) Maximum modularization of the sensor and gimbal assemblies to provide the required accuracies at minimum cost. Detailed information is given on each. (MOW)

  6. ETHOS: Education Through Organ Study. Final Report.

    Science.gov (United States)

    Wohl, Seth F.

    This document describes the Education Through Organ Study Program (ETHOS) designed to counteract disaffected students' falling academic achievement, absenteeism and truancy, and negative attitudes toward education and the school. The program attempted to assure success in acquiring musical skill by providing portable desk reed organs, programmed…

  7. External wave-launcher study. Final report

    International Nuclear Information System (INIS)

    The rationale for liquid dielectrically-loaded external wave-guide launchers is discussed. The arguments are strongly indicative that a liquid dielectric-filled waveguide system could be a practical technique for launching ICRH power into a fusion reactor. A detailed summary of the work performed in the study is presented

  8. Tallahassee Community College Retention Study. Final Report.

    Science.gov (United States)

    Johnston, Archie B.

    A retention study was conducted at Tallahassee Community College (TCC) to determine reasons student withdrew from TCC prior to meeting their educational objectives. The survey population consisted of all students, apart from graduates and those who had been academically suspended, who were enrolled in winter 1981 but had not returned by winter…

  9. Geothermal reservoir insurance study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1981-10-09

    The principal goal of this study was to provide analysis of and recommendations on the need for and feasibility of a geothermal reservoir insurance program. Five major tasks are reported: perception of risk by major market sectors, status of private sector insurance programs, analysis of reservoir risks, alternative government roles, and recommendations.

  10. Nuclear safety code study. Final report

    International Nuclear Information System (INIS)

    An unprotected overpower accident in a Liquid Metal Fast Breeder Reactor is studied. A mathematical model and a system of partial differential equations for the temperature are derived. After spatial discretization, a large system of ordinary differential equations is obtained. The steady state version of the equations is solved analytically

  11. Nova Scotia wind integration study : final report

    International Nuclear Information System (INIS)

    An independent study was commissioned by the Nova Scotia Department of Energy to identify and assess the impacts of integrating large scale wind power generation into Nova Scotia's electric power system. The purpose of the study was to help Nova Scotia's efforts towards building its renewable energy supply, in order to secure a local energy resource and to protect the environment. This report provided an overview of Nova Scotia's electric power sector, including organizations involved; existing generation system; existing transmission system; renewable energy standards; Nova Scotia Power integrated resource plan; and 2007 renewable energy request for proposals. The major assumptions for the study that were discussed included system parameters; system capacity reserve requirements; expansion plans to 2020; and allocation of new wind generation by zone. Wind resource data and system dispatch modeling were also presented and transmission system modeling was outlined. This included a discussion of steady state reliability requirements; inputs to the load flow model; load flow study and contingency analysis; intra-province transmission congestion; and potential impacts on system security. The report also presented an approach to impact analysis and mitigation such as the impact on greenhouse gas and other air emissions and the impact of wind energy prices on system costs. It was concluded that one of the most important factors in evaluation of the economic impact of wind power integration is the forecasted fuel prices for the thermal units. If the fuel prices had varied significantly from the forecasted values, the study economic impact results could have been quite different. 55 tabs., 64 figs., 1 appendix

  12. Physical protection equipment study. Final report

    International Nuclear Information System (INIS)

    This report summarizes the work performed by MITRE for the U.S. Nuclear Regulatory Commission. The major products of this effort are a Catalog of Physical Protection Equipment, a Guide for Evaluation of Physical Protection Equipment, a book of Reference Materials, and a set of guidelines for use in the development of a methodology for measuring levels of security system effectiveness. A summary of recommendations resulting from this study is also presented

  13. Physical protection equipment study. Final report

    International Nuclear Information System (INIS)

    The report summarizes the work performed by MITRE for the U.S. Nuclear Regulatory Commission on each assigned task. The major products of this effort are a Catalog of Physical Protection Equipment, a Guide for Evaluation of Physical Protection Equipment, a book of Reference Materials, and a set of guidelines for use in the development of a methodology for measuring levels of security system effectiveness. A summary of recommendations resulting from this study are also presented

  14. Millimeter wave study program. Final report

    International Nuclear Information System (INIS)

    The purpose of this program was to study the various approaches to building an amplifier to produce 100 kW or more cw power at 120 GHz to decide on an optimum approach, and to perform design calculations. The study has led to the conclusion that a cyclotron resonance amplifier (gyrotron) is the optimum approach for 100 kW and that this type of interaction offers the best possibilities for going to still higher power levels. This report includes discussion in depth of all the topics and approaches considered in the study. Sections 2 and 3 deal with output waveguide and window designs. The fourth section discusses linear-beam amplifiers. The fifth section considers periodic-beam (other than cyclotron resonance) devices. Cyclotron resonance devices are considered in detail. Arguments are given leading to the choice of the gyrotron as the optimum approach in section 7. Design calculations for a 100 kW gyrotron amplifier are given based on the background and theory presented in section 6

  15. Renewable Energy Feasibility Study Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Rooney, Tim [Antares Group Inc.

    2013-10-30

    The Gila River Indian Community (GRIC or the Community) contracted the ANTARES Group, Inc. (“ANTARES”) to assess the feasibility of solar photovoltaic (PV) installations. A solar energy project could provide a number of benefits to the Community in terms of potential future energy savings, increased employment, environmental benefits from renewable energy generation and usage, and increased energy self-sufficiency. The study addresses a number of facets of a solar project’s overall feasibility, including:  Technical appropriateness;  Solar resource characteristics and expected system performance;  Levelized cost of electricity (LCOE) economic assessment. The Gila River Indian Community (GRIC or the Community) contracted the ANTARES Group, Inc. (“ANTARES”) to prepare a biomass resource assessment study and evaluate the feasibility of a bioenergy project on Community land. A biomass project could provide a number of benefits to the Community in terms of increased employment, environmental benefits from renewable energy generation and usage, and increased energy self-sufficiency. The study addresses a number of facets of a biomass project’s overall feasibility, including:  Resource analysis and costs;  Identification of potential bioenergy projects;  Technical and economic (levelized cost of energy) modeling for selected project configuration.

  16. Canadian consumer battery baseline study : final report

    International Nuclear Information System (INIS)

    This report provided information about the estimated number of consumer and household batteries sold, re-used, stored, recycled, and disposed each year in Canada. The report discussed the ways in which different batteries posed risks to human health and the environment, and legislative trends were also reviewed. Data used in the report were obtained from a literature review as well as through a series of interviews. The study showed that alkaline batteries are the most common primary batteries used by Canadians, followed by zinc carbon batteries. However, lithium primary batteries are gaining in popularity, and silver oxide and zinc air button cell batteries are also used in applications requiring a flat voltage and high energy. Secondary batteries used in laptop computers, and cell phones are often made of nickel-cadmium, nickel-metal-hydroxide, and lithium ion. Small sealed lead batteries are also commonly used in emergency lighting and alarm systems. Annual consumption statistics for all types of batteries were provided. Results of the study showed that the primary battery market is expected to decline. Total units of secondary batteries are expected to increase to 38.6 million units by 2010. The report also used a spreadsheet model to estimate the flow of consumer batteries through the Canadian waste management system. An estimated 347 million consumer batteries were discarded in 2004. By 2010, it is expected that an estimated 494 million units will be discarded by consumers. The study also considered issues related to lead, cadmium, mercury, and nickel disposal and the potential for groundwater contamination. It was concluded that neither Canada nor its provinces or territories have initiated legislative or producer responsibility programs targeting primary or secondary consumer batteries. 79 refs., 37 tabs., 1 fig

  17. Heat treatment study 2. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Workman, G.L.

    1990-04-01

    The microstructural variations in nickel based superalloys that result from modifications in processing were examined. These superalloys include MAR-M246(HF) and PWA1480. Alternate heat treatments for equiaxed as-cast specimens were studied and a sample matrix of 42 variations in the heat treatments were processed, as well as different directional solidification parameters. Variation in temperature and times for both solution and aging were performed. Photomicrographs were made of the microstructure and volume fraction analysis of primary gamma-prime and aged gamma-prime precipitates were performed. The results of the heat treatment, cooling rate, and directional solidification experiments are discussed.

  18. Comparison of provisional with final notifiable disease case counts - National Notifiable Diseases Surveillance System, 2009.

    Science.gov (United States)

    2013-09-13

    States report notifiable disease cases to CDC through the National Notifiable Diseases Surveillance System (NNDSS). This allows CDC to assist with public health action and monitor infectious diseases across jurisdictional boundaries nationwide. The Morbidity and Mortality Weekly Report (MMWR) is used to disseminate these data on infectious disease incidence. The extent to which the weekly notifiable conditions are overreported or underreported can affect public health understanding of changes in the burden, distribution, and trends in disease, which is essential for control of communicable diseases. NNDSS encourages state health departments to notify CDC of a case when initially reported. These cases are included in the weekly provisional counts. The status of reported cases can change after further investigation by the states, resulting in differences between provisional and final counts. Increased knowledge of these differences can help in guiding the use of information from NNDSS. To quantify the extent to which final counts differ from provisional counts of notifiable infectious disease in the United States, CDC analyzed 2009 NNDSS data for 67 conditions. The results of this analysis demonstrate that for five conditions, final case counts were lower than provisional counts, but for 59 conditions, final counts were higher than provisional counts. The median difference between final and provisional counts was 16.7%; differences were ≤20% for 39 diseases but >50% for 12. These differences occur for various diseases and in all states. Provisional case counts should be interpreted with caution and an understanding of the reporting process. PMID:24025757

  19. Geochemistry studies in Eastern Kentucky. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Negus-de Wys, J.

    1981-04-01

    Presented here are the results of inorganic geochemical studies on well cuttings from fourteen wells in the Big Sandy Gas Field. Both x-ray fluorescence and x-ray diffraction were used in analysis. Resultant mineralic data and elemental data were mapped by computer and by hand for five intervals of Ohio Shale and for the Berea/Bedford sequence. Comparisons of the geochemistry trend maps were made with lithology, structure, thermal maturation, gas open flow, and paleoenvironment. Techniques used included visual map comparison, computer map comparison programs utilizing correlation coefficients based on grid derived data sets, cluster analysis, x-y plots, and r/sup 2/ (coefficient of determination). A limited number of regional maps are included. It is concluded that inorganic geochemical analysis can be useful in: (1) suggesting paleoenvironmental trends; (2) establishing depositional trends; (3) enhancing exploration in terms of setting limits and pinpointing potential areas for hydrocarbon recovery; and (4) identification of likely locations for large gas fields when used with other geological studies. Elemental data analysis is the most accurate, and can be done quickly and inexpensively. It is concluded that the Big Sandy gas field area is a unique stratigraphic-structural gas trap, in which sedimentary factors, depositional basin features, plant evolution and occurrence, and structural elements all played important roles. Combinations of certain of these ingredients in different amounts may exist in other parts of the basin, and thus, suggest areas for hydrocarbon accumulation and potential recovery.

  20. Pinellas Plant feasibility study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    The Pinellas Plant was built in 1956 to manufacture neutron generators, a principal component in nuclear weapons. In September 1990, the Department of Health and Rehabilitative Services (HRS) entered into an agreement with DOE to independently examine environmental monitoring data from the plant and health data from Pinellas County to determine if an epidemiological study is technically feasible to measure possible off-site health effects from ionizing radiation. Through normal plant operations, some radioactive materials have been released to the environment. Eighty percent of the total plant releases of 107,707 curies occurred in the early years of plant operation (1957--1960). The primary materials released were tritium gas, tritium oxide and krypton-85. Environmental monitoring for radioactive releases from the plant has been done regularly since 1975. The US Public Health Service Centers for Disease Control and Prevention (CDC), in assisting HRS, has determined that sufficient radiological data exist by which a dose reconstruction can be done. A dose reconstruction can provide an estimate of how much radiological exposure someone living in the vicinity of the Pinellas Plant may have suffered from environmental releases.

  1. New Particle Formation Study Final Campaign Report

    Energy Technology Data Exchange (ETDEWEB)

    Smith, JN; McMurry, PH [University of Minnesota

    2015-01-01

    The scientific foci of the New Particle Formation Study were the formation and evolution of atmospheric aerosols and the impacts of newly formed particles on cloud processes. Specifically, we planned to: (1) to identify the species and mechanisms responsible for the initial steps of new particle formation, i.e., the formation of thermodynamically stable clusters; (2) investigate the role of acid-base chemistry in new particle growth through measurements of ammonia and amines as well as organic and inorganic acids in both atmospheric nanoparticles and the gas phase; (3) investigate the contribution of other surface area or volume-controlled processes to nanoparticle formation and growth; (4) create a comprehensive dataset related to new particle formation and growth that can be used as input for our own thermodynamic models as well as the modeling efforts by our Department of Energy (DOE) Aerosol Life Cycle working group collaborators; (5) characterize the increase of the number and activity of cloud condensation nuclei (CCN) due to particle formation and growth; (6) determine the regional extent of new particle formation to address the role that atmospheric transport plays in determining the impacts, if any, of new particle formation on cloud number and properties.

  2. Uranium miner lung cancer study. Final report

    International Nuclear Information System (INIS)

    This study on uranium miners was started in 1957 and extended through June 30, 1986. It consisted of the routine screening of sputum from uranium miners of the Colorado Plateau, and collection of surgical and autopsy material from uranium miners who developed lung cancer. The projects resulted in: (1) Proof, for the first time, that cancer takes from 10 to 15 years to develop from the maximum accumulated carcinogenic insult and can be demonstrated through progressive cellular changes of the bronchial tree; (2) Development of a method for preserving, concentrating, and processing sputum samples. This is known as the Saccomanno Technique, and is used worldwide in diagnosing lung cancer; (3) Publication of the 1st and 2nd editions of a full-color textbook entitled ''Diagnostic Pulmonary Cytology;'' (4) Presentation of conclusive data on the effects of cigarette smoking and alpha progeny radiation on uranium miners, and information on safe radiation exposure levels; (5) Development of a brush-wash tube for collecting, concentrating, and preparing bronchial brushings and washings; (6) Development of cytological criteria which has improved sensitivity from 30% to about 60%; (7) Development of criteria for cytologic identification of carcinoma in situ, making it possible to diagnose lung cancer before it can be detected on chest x-ray

  3. Study of The Final Customer Loyalty Process

    Directory of Open Access Journals (Sweden)

    Juan Carlos Fandos

    2013-12-01

    Full Text Available For any business is important to maintain a loyal customer base to help they to survive over time. This situation is accentuated even to the extent that increases competition and increases uncertainty. At present these are two features that are really developed. Because of the deep crisis in which we are, and other elements such as globalization and the development of new technologies and communication systems, we are faced with a scenario of intense competition and uncertainty manifest. It is therefore more necessary than ever to know in depth how to get customers to be faithful, and develop true loyalty strategies.In this paper, we present the sequential approach to the formation of consumer loyalty in order to deepen understanding of the concept. It is supplemented by studying the combined effect of switching costs as an element that promotes the continuity of the relationship. The results shows that the consumer takes a more cognitive process information in their initial assessments of the service and therefore in the early stages of loyalty. As advances in consumer behavior process becomes more direct and mechanic, so we can say that the customer-company bond is stronger.

  4. Final LDRD Report for Feasibility Study

    International Nuclear Information System (INIS)

    Extreme conditions of density and temperature of interest to DNT are similar to conditions of low-altitude atmospheres of neutron stars. Consequently, HED experimental capabilities being developed at LLNL (NIF, petawatt lasers) will open the door to laboratory studies of neutron star atmospheres. This capability will seed a new era in the study of extreme physics generated by strongly radiation dominated flows and laser-plasma interactions for the laboratory study of distant astrophysical phenomena. Indeed as has been noted by the recent Davidsen report on Frontiers of HEDPP (p. 85) ''Accretion disks and atmospheres of neutron stars likely fall in the radiation-dominated regimes, where the radiation pressure dominates the particle pressure. Unique dynamics can ensue in such a radiation dominated plasma, especially in the presence of turbulent flows and magnetic fields. With the next generation of HED facilities such as ZR, NIF, coupled with ultra-intense laser ''heater beams'', it may become possible to create radiation-dominated plasma conditions in the laboratory relevant to neutron star (and black hole) accretion dynamics''. With the recent advent of the Rossi XTE time-resolved x-ray satellite, we have entered a new era in our ability to probe the physics and dynamics of neutron stars and black holes on rapid timescales not previously possible. With RXTE, we have diagnosed the dynamics occurring near the surface of a neutron star on timescales less than a millisecond, and have discovered a new phenomena, photon bubble instabilities, in an a accreting X-ray pulsar Centaurus X-3, some 30,000 light years across the galaxy. (Jerningan, Klein and Arons, ApJ, 2000) We in fact, predicted this instability in simulations with time-dependent 2D radiation-hydrodynamics codes that we had developed. (Klein (and others) ApJ 1996a, 1996b) Strongly magnetized neutron stars accrete mass from a nearby normal star that is in orbit with the neutron star. The mass is transferred by

  5. Adsorption isotherm special study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-05-01

    The study was designed to identify methods to determine adsorption applicable to Uranium Mill Tailings Remedial Action (UMTRA) Project sites, and to determine how changes in aquifer conditions affect metal adsorption, resulting retardation factors, and estimated contaminant migration rates. EPA and ASTM procedures were used to estimate sediment sorption of U, As, and Mo under varying groundwater geochemical conditions. Aquifer matrix materials from three distinct locations at the DOE UMTRA Project site in Rifle, CO, were used as the adsorbents under different pH conditions; these conditions stimulated geochemical environments under the tailings, near the tailings, and downgradient from the tailings. Grain size, total surface area, bulk and clay mineralogy, and petrography of the sediments were characterized. U and Mo yielded linear isotherms, while As had nonlinear ones. U and Mo were adsorbed strongly on sediments acidified to levels similar to tailings leachate. Changes in pH had much less effect on As adsorption. Mo was adsorbed very little at pH 7-7.3, U was weakly sorbed, and As was moderately sorbed. Velocities were estimated for metal transport at different pHs. Results show that the aquifer materials must be characterized to estimate metal transport velocities in aquifers and to develop groundwater restoration strategies for the UMTRA project.

  6. Adsorption isotherm special study. Final report

    International Nuclear Information System (INIS)

    The study was designed to identify methods to determine adsorption applicable to Uranium Mill Tailings Remedial Action (UMTRA) Project sites, and to determine how changes in aquifer conditions affect metal adsorption, resulting retardation factors, and estimated contaminant migration rates. EPA and ASTM procedures were used to estimate sediment sorption of U, As, and Mo under varying groundwater geochemical conditions. Aquifer matrix materials from three distinct locations at the DOE UMTRA Project site in Rifle, CO, were used as the adsorbents under different pH conditions; these conditions stimulated geochemical environments under the tailings, near the tailings, and downgradient from the tailings. Grain size, total surface area, bulk and clay mineralogy, and petrography of the sediments were characterized. U and Mo yielded linear isotherms, while As had nonlinear ones. U and Mo were adsorbed strongly on sediments acidified to levels similar to tailings leachate. Changes in pH had much less effect on As adsorption. Mo was adsorbed very little at pH 7-7.3, U was weakly sorbed, and As was moderately sorbed. Velocities were estimated for metal transport at different pHs. Results show that the aquifer materials must be characterized to estimate metal transport velocities in aquifers and to develop groundwater restoration strategies for the UMTRA project

  7. Pinellas Plant feasibility study. Final report

    International Nuclear Information System (INIS)

    The Pinellas Plant was built in 1956 to manufacture neutron generators, a principal component in nuclear weapons. In September 1990, the Department of Health and Rehabilitative Services (HRS) entered into an agreement with DOE to independently examine environmental monitoring data from the plant and health data from Pinellas County to determine if an epidemiological study is technically feasible to measure possible off-site health effects from ionizing radiation. Through normal plant operations, some radioactive materials have been released to the environment. Eighty percent of the total plant releases of 107,707 curies occurred in the early years of plant operation (1957--1960). The primary materials released were tritium gas, tritium oxide and krypton-85. Environmental monitoring for radioactive releases from the plant has been done regularly since 1975. The US Public Health Service Centers for Disease Control and Prevention (CDC), in assisting HRS, has determined that sufficient radiological data exist by which a dose reconstruction can be done. A dose reconstruction can provide an estimate of how much radiological exposure someone living in the vicinity of the Pinellas Plant may have suffered from environmental releases

  8. Microbial field pilot study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Knapp, R.M.; McInerney, M.J.; Menzie, D.E.; Coates, J.D.; Chisholm, J.L.

    1993-05-01

    A multi-well microbially enhanced oil recovery field pilot has been performed in the Southeast Vassar Vertz Sand Unit in Payne County, Oklahoma. The primary emphasis of the experiment was preferential plugging of high permeability zones for the purpose of improving waterflood sweep efficiency. Studies were performed to determine reservoir chemistry, ecology, and indigenous bacteria populations. Growth experiments were used to select a nutrient system compatible with the reservoir that encouraged growth of a group of indigenous nitrate-using bacteria and inhibit growth of sulfate-reducing bacteria. A specific field pilot area behind an active line drive waterflood was selected. Surface facilities were designed and installed. Injection protocols of bulk nutrient materials were prepared to facilitate uniform distribution of nutrients within the pilot area. By the end of December, 1991, 82.5 tons (75.0 tonnes) of nutrients had been injected in the field. A tracer test identified significant heterogeneity in the SEVVSU and made it necessary to monitor additional production wells in the field. The tracer tests and changes in production behavior indicate the additional production wells monitored during the field trial were also affected. Eighty two and one half barrels (13.1 m{sup 3}) of tertiary oil have been recovered. Microbial activity has increased CO{sub 2} content as indicated by increased alkalinity. A temporary rise in sulfide concentration was experienced. These indicate an active microbial community was generated in the field by the nutrient injection. Pilot area interwell pressure interference test results showed that significant permeability reduction occurred. The interwell permeabilities in the pilot area between the injector and the three pilot production wells were made more uniform which indicates a successful preferential plugging enhanced oil recovery project.

  9. Case Studies on Crossborder Ecotrade

    OpenAIRE

    Asian Development Bank

    2012-01-01

    This compilation of four country case studies provides a comprehensive understanding of challenges, good practices, and lessons learnt under different situations. In the Lao People’s Democratic Republic, a cross-border vegetable trade agreement with its neighboring, Thailand, aided in stabilizing market prices and provided financial benefits to local contract farmers. Similarly, organic certification and geographic indication of sugar palm in Cambodia linked local farmers to the global market...

  10. Study of diffractively produced five-pion final states

    International Nuclear Information System (INIS)

    Diffractively produced five-pion final states are studied in the reaction π-d→3π-2π+d at 15 GeV/c and compared with predictions of the statistical dissociation model and multiperipheral models. (Auth.)

  11. A case study of embarrassment.

    Science.gov (United States)

    Dann, O T

    1977-01-01

    The psychoanalytic references to embarrassment are reviewed. Embarrassment, in the literature, is seen largely as an affect involving exhibitionistic and scopophilic conflicts and defenses against these. A case in which embarrassment was prominent is discussed. Embarrassment in the patient was an ego response which implied an external object for its manifestation. It involved exhibitionistic and scopophilic conflicts and projective defenses, but also operated in ego-gratifying and adaptive ways. Her embarrassment was understood through the analysis of an initial embarrassing dream of nakedness and other dreams and associated material as the defensive out-grouth of repeated exposures to the primal scene. Embarrassment was a resistance to remembering in the analysis, and the primal-scene experiences were partially reconstructed. The analytic situation was, in many ways, a symbolic re-creation of the primal scene, including the patient's response of embarrassment. The development of embarrassment in the patient's childhood was furthered and confirmed by its being an identification with the attitudes of both parents. Finally, some reflections on embarrassment and shame in its various forms are set forth. PMID:560404

  12. Fiscal Responsiveness, Persistence and Discretion: A Case Study of Pakistan

    Directory of Open Access Journals (Sweden)

    Syed Ammad

    2012-09-01

    Full Text Available The main objective of this study is to analyses the fiscal policy conditions in Pakistan; in case of output change ( fiscal responsiveness, effect of last year policy on this year( fiscal persistence and finally fiscal discretion, through a 2SLS method the study period consist of 1972 to 2010. The main finding of the study is government expenditures are more responsive in case Pakistan which is the main cause of this fiscal imbalances and also indicating an unstable fiscal stance.

  13. A case study of Impetigo

    Directory of Open Access Journals (Sweden)

    Mansouri P

    1993-05-01

    Full Text Available This is a report of a case study on 234 patients with impetigo who referred to Razi Dermatology Hospital from April to November, 1989. Treatment was started immediately after obtaining direct smear and performing culture and antibiotic sensitivity test. The most common organism responsible for impetigo was the coagulase-positive staphylococcus (71%. In 13.7% of the cases, the coagulase-negative staphylococcus was grown on culture media, but none of the cultures showed streptococcus as the main organism. Treatment was started with oral penicillin V, oral erythromycin, benzathine penicillin G injection, oral cephalexin, and topical fuccidin. Clinical and bacteriological evaluation after 3-7 days showed that it is preferable to use oral cephalexin instead of other protocols such as oral erythromycin, which has previously been the drug of choice for impetigo. In addition, topical fuccidin with a 75% curative rate was the first drug for treatment, with the same effect as the oral cephalexin

  14. 'Key' sectors in final energy consumption: an input-output application to the Spanish case

    International Nuclear Information System (INIS)

    In this paper we analyze the determination of 'key' sectors in the final energy consumption. We approach this issue from an input-output perspective and we design a methodology based on the elasticities of the demands of final energy consumption. As an exercise, we apply the proposed methodology to the Spanish economy. The analysis allows us to indicate the greater or lesser relevance of the different sectors in the consumption of final energy, pointing out which sectors deserve greater attention in the Spanish case and showing the implications for energy policy

  15. Case studies in canonical stewardship.

    Science.gov (United States)

    Cafardi, N P; Hite, J

    1985-11-01

    In facing the challenges that confront Catholic health care today, it is important to know which civil law forms will assist in preserving the Church's ministry. The proper meshing of civil law and canon law thus provides a vehicle to strengthen the apostolate's work. The case studies presented here suggest several means of applying the principles in the new Code of Canon Law to three potentially problematic situations: the merger of a Catholic and non-Catholic hospital, the leasing of a Catholic hospital to an operating company, and the use of the multicorporate format. PMID:10274590

  16. Expanded studies of linear collider final focus systems at the Final Focus Test Beam

    Energy Technology Data Exchange (ETDEWEB)

    Tenenbaum, P.G.

    1995-12-01

    In order to meet their luminosity goals, linear colliders operating in the center-of-mass energy range from 3,50 to 1,500 GeV will need to deliver beams which are as small as a few Manometers tall, with x:y aspect ratios as large as 100. The Final Focus Test Beam (FFTB) is a prototype for the final focus demanded by these colliders: its purpose is to provide demagnification equivalent to those in the future linear collider, which corresponds to a focused spot size in the FFTB of 1.7 microns (horizontal) by 60 manometers (vertical). In order to achieve the desired spot sizes, the FFTB beam optics must be tuned to eliminate aberrations and other errors, and to ensure that the optics conform to the desired final conditions and the measured initial conditions of the beam. Using a combination of incoming-beam diagnostics. beam-based local diagnostics, and global tuning algorithms, the FFTB beam size has been reduced to a stable final size of 1.7 microns by 70 manometers. In addition, the chromatic properties of the FFTB have been studied using two techniques and found to be acceptable. Descriptions of the hardware and techniques used in these studies are presented, along with results and suggestions for future research.

  17. Expanded studies of linear collider final focus systems at the Final Focus Test Beam

    International Nuclear Information System (INIS)

    In order to meet their luminosity goals, linear colliders operating in the center-of-mass energy range from 3,50 to 1,500 GeV will need to deliver beams which are as small as a few Manometers tall, with x:y aspect ratios as large as 100. The Final Focus Test Beam (FFTB) is a prototype for the final focus demanded by these colliders: its purpose is to provide demagnification equivalent to those in the future linear collider, which corresponds to a focused spot size in the FFTB of 1.7 microns (horizontal) by 60 manometers (vertical). In order to achieve the desired spot sizes, the FFTB beam optics must be tuned to eliminate aberrations and other errors, and to ensure that the optics conform to the desired final conditions and the measured initial conditions of the beam. Using a combination of incoming-beam diagnostics. beam-based local diagnostics, and global tuning algorithms, the FFTB beam size has been reduced to a stable final size of 1.7 microns by 70 manometers. In addition, the chromatic properties of the FFTB have been studied using two techniques and found to be acceptable. Descriptions of the hardware and techniques used in these studies are presented, along with results and suggestions for future research

  18. A parathyroid scintigraphy case study

    Energy Technology Data Exchange (ETDEWEB)

    O' Leary, Desiree [UCD School of Diagnostic Imaging, St Anthony' s Campus, Herbert Avenue, Dublin 4 (Ireland)]. E-mail: desiree.oleary@ucd.ie

    2005-05-01

    Background: There has been much debate concerning the most suitable protocol for parathyroid scintigraphy; the merits of various radiopharmaceuticals versus the correct imaging protocol to visualise both ectopic and anatomically placed adenomas against the various equipment choices have been debated. Aim: To demonstrate, through the use of a case study, the necessity of changing imaging protocols for parathyroid scintigraphy where a definitive imaging diagnosis is absent in the face of strong clinical suspicion. Method: Use is made of Tc99mMIBI, full field chest scintigraphy, a clearly defined imaging protocol and SPECT imaging to locate ectopic parathyroid tissue in a female patient with significant symptoms of parathyroid hyperfunction. Results: A single hyperfunctioning adenoma is located in the pre-carinal area of the mediastinum. Using a radioguided surgical technique the hyperfunctioning tissue is excised and confirmed by histopathology. Conclusion: Whilst a dramatic reduction in patient symptoms was not seen immediately in this patient, the symptoms of the illness have been subsiding since January 2003. This case study demonstrates the necessity of changing imaging protocols for parathyroid scintigraphy where a definitive imaging diagnosis is absent in the face of strong clinical suspicion.

  19. Case studies in Bayesian microbial risk assessments

    Directory of Open Access Journals (Sweden)

    Turner Joanne

    2009-12-01

    Full Text Available Abstract Background The quantification of uncertainty and variability is a key component of quantitative risk analysis. Recent advances in Bayesian statistics make it ideal for integrating multiple sources of information, of different types and quality, and providing a realistic estimate of the combined uncertainty in the final risk estimates. Methods We present two case studies related to foodborne microbial risks. In the first, we combine models to describe the sequence of events resulting in illness from consumption of milk contaminated with VTEC O157. We used Monte Carlo simulation to propagate uncertainty in some of the inputs to computer models describing the farm and pasteurisation process. Resulting simulated contamination levels were then assigned to consumption events from a dietary survey. Finally we accounted for uncertainty in the dose-response relationship and uncertainty due to limited incidence data to derive uncertainty about yearly incidences of illness in young children. Options for altering the risk were considered by running the model with different hypothetical policy-driven exposure scenarios. In the second case study we illustrate an efficient Bayesian sensitivity analysis for identifying the most important parameters of a complex computer code that simulated VTEC O157 prevalence within a managed dairy herd. This was carried out in 2 stages, first to screen out the unimportant inputs, then to perform a more detailed analysis on the remaining inputs. The method works by building a Bayesian statistical approximation to the computer code using a number of known code input/output pairs (training runs. Results We estimated that the expected total number of children aged 1.5-4.5 who become ill due to VTEC O157 in milk is 8.6 per year, with 95% uncertainty interval (0,11.5. The most extreme policy we considered was banning on-farm pasteurisation of milk, which reduced the estimate to 6.4 with 95% interval (0,11. In the second

  20. Electric utility engineer`s FGD manual -- Volume 2: Major mechanical equipment; FGD proposal evaluations; Use of FGDPRISM in FGD system modification, proposal, evaluation, and design; FGD system case study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-04

    Part 2 of this manual provides the electric utility engineer with detailed technical information on some of the major mechanical equipment used in the FGD system. The objectives of Part 2 are the following: to provide the electric utility engineer with information on equipment that may be unfamiliar to him, including ball mills, vacuum filters, and mist eliminators; and to identify the unique technique considerations imposed by an FGD system on more familiar electric utility equipment such as fans, gas dampers, piping, valves, and pumps. Part 3 provides an overview of the recommended procedures for evaluating proposals received from FGD system vendors. The objectives are to provide procedures for evaluating the technical aspects of proposals, and to provide procedures for determining the total costs of proposals considering both initial capital costs and annual operating and maintenance costs. The primary objective of Part 4 of this manual is to provide the utility engineer who has a special interest in the capabilities of FGDPRISM [Flue Gas Desulfurization PRocess Integration and Simulation Model] with more detailed discussions of its uses, requirements, and limitations. Part 5 is a case study in using this manual in the preparation of a purchase specification and in the evaluation of proposals received from vendors. The objectives are to demonstrate how the information contained in Parts 1 and 2 can be used to improve the technical content of an FGD system purchase specification; to demonstrate how the techniques presented in Part 3 can be used to evaluate proposals received in response to the purchase specification; and to illustrate how the FGDPRISM computer program can be used to establish design parameters for the specification and evaluate vendor designs.

  1. KAIZEN – A case study

    Directory of Open Access Journals (Sweden)

    Manjunath Shettar

    2015-05-01

    Full Text Available The ultimate objective of manufacturing industries is to increase productivity with high quality. At present, many manufacturing companies are facing problems such as high quality rejection, high inventories, high lead time, high costs of production, and inability to cope with customer orders. By implementing and practicing the lean production system many problems can be solved without employing high-tech and high-touch approaches but by involving people on the shop floor in Kaizen activities. Kaizen is one of the powerful tools of lean manufacturing. Kaizen refers to continuous improvement in performance, cost and quality. Kaizen ensures that manufacturing processes become leaner and fitter, but eliminate waste (problem where value is added. The main objective of this paper is to provide a background on kaizen, present an overview of kaizen concepts that are used to transform a company into a high performing lean enterprise. A case study of implementation of Kaizen‟s has been discussed.

  2. STS Case Study Development Support

    Science.gov (United States)

    Rosa de Jesus, Dan A.; Johnson, Grace K.

    2013-01-01

    The Shuttle Case Study Collection (SCSC) has been developed using lessons learned documented by NASA engineers, analysts, and contractors. The SCSC provides educators with a new tool to teach real-world engineering processes with the goal of providing unique educational materials that enhance critical thinking, decision-making and problem-solving skills. During this third phase of the project, responsibilities included: the revision of the Hyper Text Markup Language (HTML) source code to ensure all pages follow World Wide Web Consortium (W3C) standards, and the addition and edition of website content, including text, documents, and images. Basic HTML knowledge was required, as was basic knowledge of photo editing software, and training to learn how to use NASA's Content Management System for website design. The outcome of this project was its release to the public.

  3. A retrospective study of nine cases of Acanthamoeba keratitis

    Directory of Open Access Journals (Sweden)

    Tetsuya Mutoh

    2010-10-01

    Full Text Available Tetsuya Mutoh, Isao Ishikawa, Yukihiro Matsumoto, Makoto ChikudaDokkyo Medical University Koshigaya Hospital, Saitama, JapanPurpose: To evaluate the clinical features of Acanthamoeba keratitis in nine patients diagnosed at Dokkyo Medical University Koshigaya Hospital, Saitama, Japan.Methods: In nine eyes of nine patients, Acanthamoeba keratitis was diagnosed by direct light microscopy of corneal scrapings stained by the Parker ink-potassium hydroxide method between September 2006 and September 2009. Their clinical features and course were studied retrospectively. Antifungal eye drops, systemic antifungal therapy, and surgical debridement of the corneal lesions were performed in all patients.Results: At presentation, the clinical stage was initial in six cases, transient in one case, and complete in two cases. The patients were all contact lens wearers who had washed their lens storage cases with tap water. After treatment, final visual acuity was improved in six cases, unchanged in one case, and worse in two cases. The patient with the worst final vision (hand motion had rheumatoid arthritis and was taking oral prednisolone, which led to corneal perforation and prevented adequate debridement from being done.Conclusion: Acanthamoeba keratitis is closely related to wearing contact lenses and washing the lens storage case with tap water. Although final visual acuity improved after treatment in most patients, insufficient surgical debridement resulted in a poor visual prognosis.Keywords: surgical debridement, Acanthamoeba keratitis, contact lens wearers

  4. Using Case Studies To Teach Science.

    Science.gov (United States)

    Gabel, Connie

    Using case studies in science instruction develops problem solving and enhances listening and cooperative learning skills. Unlike other disciplines such as law and medicine, the case study method is rarely used in science education to enrich the curriculum. This study investigates the use of content-based case studies as a means of developing…

  5. The case study of biomaterials and biominerals

    Science.gov (United States)

    Del Hoyo Martínez, Carmen

    2013-04-01

    The teaching of biomaterials as case study by on-line platform , susceptible to develop both individually and in groups, got different objectives proposed by the European Higher Education System, among which include: participate actively in the teaching-learning process by students, interpreting situations, adapt processes and solutions. It also improves oral and written communication, analytical skills and synthesis and also the ability to think critically. Biomaterials have their origin in biominerals. These are solid inorganic compounds of defined structure, consisting of molecular control mechanisms that operate in biological systems. Its main functions are: structural support, a reservoir of essential elements, sensors, mechanical protection and storage of toxic elements. Following the demand of materials compatible with certain functional systems of our body, developed biomaterials. Always meet the condition of biocompatibility. Should be tolerated by the body and do not provoke rejection. This involves a comprehensive study of physiological conditions and the anatomy of the body where a biomaterial has to be implemented. The possibility of generating new materials from biominerals has a major impact in medicine and other fields could reach as geology, construction, crystallography, etc. While the study of these issues is in its infancy today, can be viewed as an impact on the art and future technology. Planning case study that students would prepare its report for discussion in subgroups. Occurs then the pooling of individual analysis, joint case discussion and adoption by the subgroup of a consensual solution to the problem. The teacher as facilitator and coordinator of the final case analysis, sharing leads to group-wide class and said the unanimous decision reached by the students and gives his opinion on the resolution of the case. REFERENCES D.P. Ausubel. Psicología Educativa. Un punto de vista cognoscitivo. Trillas. Ed. 1983. E.W. Eisner. Procesos

  6. Catalog of NASA-Related Case Studies

    Data.gov (United States)

    National Aeronautics and Space Administration — The OCKO has developed over 50 case studies to enhance learning at workshops, training, retreats and conferences. Case studies make mission knowledge attractive and...

  7. Model validation studies of solar systems, Phase III. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Lantz, L.J.; Winn, C.B.

    1978-12-01

    Results obtained from a validation study of the TRNSYS, SIMSHAC, and SOLCOST solar system simulation and design are presented. Also included are comparisons between the FCHART and SOLCOST solar system design programs and some changes that were made to the SOLCOST program. Finally, results obtained from the analysis of several solar radiation models are presented. Separate abstracts were prepared for ten papers.

  8. Plant systems/components modularization study. Final report

    International Nuclear Information System (INIS)

    The final results are summarized of a Plant Systems/Components Modularization Study based on Stone and Webster's Pressurized Water Reactor Reference Design. The program has been modified to include evaluation of the most promising areas for modular consideration based on the level of the Sundesert Project engineering design completion and the feasibility of their incorporation into the plant construction effort

  9. Conceptual Tutoring Software for Promoting Deep Learning: A Case Study

    Science.gov (United States)

    Stott, Angela; Hattingh, Annemarie

    2015-01-01

    The paper presents a case study of the use of conceptual tutoring software to promote deep learning of the scientific concept of density among 50 final year pre-service student teachers in a natural sciences course in a South African university. Individually-paced electronic tutoring is potentially an effective way of meeting the students' varied…

  10. The Fisher Effect in the Spanish Case: A Preliminary Study

    OpenAIRE

    Francisco Jareño; Marta Tolentino

    2012-01-01

    We revise previous literature about Fisher Effect, in order to check if the majority of nominal interest rates movements are caused by inflation rate fluctuations, remaining constant the real interest rate. Finally, we analyse the Fisher Effect in the Spanish case with a preliminary analysis in order to validate future studies.

  11. Primary Datasets for Case Studies of River-Water Quality

    Science.gov (United States)

    Goulder, Raymond

    2008-01-01

    Level 6 (final-year BSc) students undertook case studies on between-site and temporal variation in river-water quality. They used professionally-collected datasets supplied by the Environment Agency. The exercise gave students the experience of working with large, real-world datasets and led to their understanding how the quality of river water is…

  12. Systems study 'Alternative Entsorgung'. Final report. Technical annex 23

    International Nuclear Information System (INIS)

    Reprocessing is not sensible for a number of certain spent fuel elements. From this point of view, it is necessary to develop a concept which takes into account the final storage of vitrified fission products and also fuel elements which are not processed. The aim of the mixed fuel processing concept is to design a method of treatment, which provides externally identical final storage barrels for both ways of fuel disposal and which provides associated standardized handling equipment. The study shows a way which provides for the packing of processed spent fuel elements in moulds with the external dimensions of the HAW mould and which makes it possible to store these fuel element final storage moulds together with HAW moulds in boreholes. (orig./HP)

  13. Summary of case studies for cooperation mechanisms

    DEFF Research Database (Denmark)

    Longa, Francesco Dalla; Klinge Jacobsen, Henrik; Hansen, Lise-Lotte Pade; Tantareanu, Cristian; Caldes-Gomez, Natalia; Santamaria-Belda, Marta

    2012-01-01

    This document is a summary report highlighting the main aspect analyzed in the RES4LESS case studies. The document starts with an introductory chapter where the background that led to the selection of the case studies is outlined. In the following three chapters the case studies are presented, hi...

  14. Case Study: The Chemistry of Cocaine

    Science.gov (United States)

    Dewprashad, Brahmadeo

    2011-01-01

    This column provides original articles on innovations in case study teaching, assessment of the method, as well as case studies with teaching notes. This month's case study focuses on the chemistry of cocaine to teach a number of core concepts in organic chemistry. It also requires that students read and analyze an original research paper on…

  15. Concentrated photovoltaics, a case study

    Directory of Open Access Journals (Sweden)

    Antonini Piergiorgio

    2014-01-01

    Full Text Available Concentrated Photovoltaics (CPV, once a niche technology, has now reached the maturity and reliability for large scale power generation. Especially in regions where temperatures are very high, the use of high efficiency triple junction solar cells with concentrating optics allows stable energy yield. Thus CPV can be seen as complementary and not in concurrence with silicon photovoltaics. The state of the art, the advantages and limitations of this technology will be shown. Among the main advantages of CPV is the possibility of a much higher energy supply, when compared to silicon photovoltaics, both comparing CPV and silicon with same area or the same installed power. The use of recycled and recyclable materials allows a more environmentally friendly production. The possibility to couple CPV with desalination facilities, energy storage will be analysed. As an example a case study of a CPV installation in Northern Italy is discussed. Here the use of mature technologies, derived from automotive and lighting sectors resulted in a simple and efficient module.

  16. Concentrated photovoltaics, a case study

    Science.gov (United States)

    Antonini, Piergiorgio; Centro, Sandro; Golfetto, Stelvio; Saccà, Alessandro

    2014-12-01

    Concentrated Photovoltaics (CPV), once a niche technology, has now reached the maturity and reliability for large scale power generation. Especially in regions where temperatures are very high, the use of high efficiency triple junction solar cells with concentrating optics allows stable energy yield. Thus CPV can be seen as complementary and not in concurrence with silicon photovoltaics. The state of the art, the advantages and limitations of this technology will be shown. Among the main advantages of CPV is the possibility of a much higher energy supply, when compared to silicon photovoltaics, both comparing CPV and silicon with same area or the same installed power. The use of recycled and recyclable materials allows a more environmentally friendly production. The possibility to couple CPV with desalination facilities, energy storage will be analysed. As an example a case study of a CPV installation in Northern Italy is discussed. Here the use of mature technologies, derived from automotive and lighting sectors resulted in a simple and efficient module.

  17. Building Energy Information Systems: User Case Studies

    Energy Technology Data Exchange (ETDEWEB)

    Granderson, Jessica; Piette, Mary Ann; Ghatikar, Girish

    2010-03-22

    Measured energy performance data are essential to national efforts to improve building efficiency, as evidenced in recent benchmarking mandates, and in a growing body of work that indicates the value of permanent monitoring and energy information feedback. This paper presents case studies of energy information systems (EIS) at four enterprises and university campuses, focusing on the attained energy savings, and successes and challenges in technology use and integration. EIS are broadly defined as performance monitoring software, data acquisition hardware, and communication systems to store, analyze and display building energy information. Case investigations showed that the most common energy savings and instances of waste concerned scheduling errors, measurement and verification, and inefficient operations. Data quality is critical to effective EIS use, and is most challenging at the subsystem or component level, and with non-electric energy sources. Sophisticated prediction algorithms may not be well understood but can be applied quite effectively, and sites with custom benchmark models or metrics are more likely to perform analyses external to the EIS. Finally, resources and staffing were identified as a universal challenge, indicating a need to identify additional models of EIS use that extend beyond exclusive in-house use, to analysis services.

  18. Building energy information systems. User case studies

    Energy Technology Data Exchange (ETDEWEB)

    Granderson, J.; Piette, M.A.; Ghatikar, G. [Lawrence Berkeley, National Laboratory, 1 Cyclotron Road, Berkeley, CA 94720 (United States)

    2011-01-15

    Measured energy performance data are essential to national efforts to improve building efficiency, as evidenced in recent benchmarking mandates, and in a growing body of work that indicates the value of permanent monitoring and energy information feedback. This paper presents case studies of energy information systems (EIS) at four enterprises and university campuses, focusing on the attained energy savings, and successes and challenges in technology use and integration. EIS are broadly defined as performance monitoring software, data acquisition hardware, and communication systems to store, analyze, and display building energy information. Case investigations showed that the most common energy savings and instances of waste concerned scheduling errors, measurement and verification, and inefficient operations. Data quality is critical to effective EIS use, and is most challenging at the subsystem or component level, and with non-electric energy sources. Sophisticated prediction algorithms may not be well understood but can be applied quite effectively, and sites with custom benchmark models or metrics are more likely to perform analyses external to the EIS. Finally, resources and staffing were identified as a universal challenge, indicating a need to identify additional models of EIS use that extend beyond exclusive in-house use, to analysis services.

  19. Hanford 100-N Area Tracer Study Final Report

    International Nuclear Information System (INIS)

    This document provides an engineering tracer study final report for the determination of contact time for the disinfection process at Group A Nontransient Noncommunity water treatment plant for the 100- N Water Plant (located on the Hanford Site in Richland, Washington). The purpose of this study is to determine the actual detention time within the plant clearwell, and the disinfection contact time at several clearwell effluent flow rates

  20. A HARD CHOICE (CASE STUDY)

    OpenAIRE

    KRAVCHENKO NATALIYA A.; KUZNETSOVA SVETLANA A.

    2014-01-01

    The case describes the problems of strategic choice: a small company successfully working in the engineering market (automation of technological processes) in the electric power industry has to make a decision on its further development in a changing external environment and increased competition. The case was carried out to be used in training programs of different levels within the courses “Strategic Management”, “Innovation Management”, “Strategic Analysis Methods”, “Change Management” whe...

  1. Case Study Methodology and Homelessness Research

    OpenAIRE

    Jill Pable

    2013-01-01

    This paper describes the potential suitability of case study methodology for inquiry with the homeless population. It references a research study that uses case study research method to build theory. This study's topic is the lived experience of destitute individuals who reside in homeless shelters, and explores the homeless shelter built environment's potential influence on resident satisfaction and recovery. Case study methodology may be appropriate because it explores real-life contextual ...

  2. Five Misunderstandings About Case-Study Research

    DEFF Research Database (Denmark)

    Flyvbjerg, Bent

    2006-01-01

    one and concludes with the Kuhnian insight that a scientific discipline without a large number of thoroughly executed case studies is a discipline without systematic production of exemplars, and a discipline without exemplars is an ineffective one. Social science may be strengthened by the execution......This article examines five common misunderstandings about case-study research: (a) theoretical knowledge is more valuable than practical knowledge; (b) one cannot generalize from a single case, therefore, the single-case study cannot contribute to scientific development; (c) the case study is most...... useful for generating hypotheses, whereas other methods are more suitable for hypotheses testing and theory building; (d) the case study contains a bias toward verification; and (e) it is often difficult to summarize specific case studies. This article explains and corrects these misunderstandings one by...

  3. Five misunderstandings about case study research

    DEFF Research Database (Denmark)

    Flyvbjerg, Bent

    2004-01-01

    and concludes with the Kuhnian insight that a scientific discipline without a large number of thoroughly executed case studies is a discipline without systematic production of exemplars, and that a discipline without exemplars is an ineffective one. Social science may be strengthened by the execution......This article examines five common misunderstandings about case-study research: (1) Theoretical knowledge is more valuable than practical knowledge; (2) One cannot generalize from a single case, therefore the single case study cannot contribute to scientific development; (3) The case study is most...... useful for generating hypotheses, while other methods aremore suitable for hypotheses testing and theory building; (4) The case study contains a bias toward verification; and (5) It is often difficult to summarize specific case studies. The article explains and corrects these misunderstandings one by one...

  4. Five misunderstandings about Case-study Research

    DEFF Research Database (Denmark)

    Flyvbjerg, Bent

    and concludes with the Kuhnian insight that a scientific discipline without a large number of thoroughly executed case studies is a discipline without systematic production of exemplars, and that a discipline without  exemplars is an ineffective one. Social science may be strengthened by the execution......This article examines five common misunderstandings about case-study research: (1) Theoretical knowledge is more valuable than practical knowledge; (2) One cannot generalize from a single case, therefore the single case study cannot contribute to scientific development; (3) The case study is most...... useful for generating hypotheses, while other methods aremore suitable for hypotheses testing and theory building; (4) The case study contains a bias toward verification; and (5) It is often difficult to summarize specific case studies. The article explains and corrects these misunderstandings one by one...

  5. Drive Electric Vermont Case Study

    Energy Technology Data Exchange (ETDEWEB)

    Wagner, Fred [Energetics Incorporated, Columbia, MD (United States); Roberts, Dave [Vermont Energy Investment Corporation (VEIC), Burlington, VT (United States); Francfort, Jim [Idaho National Lab. (INL), Idaho Falls, ID (United States); White, Sera [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-03-01

    Currently in the United States, the heavy majority of plug-in electric vehicle (PEV) sales have been in highly conducive, selected, metropolitan areas; opposed to more broad distribution across the country. The U.S. Department of Energy’s EV Everywhere Grand Challenge is looking carefully at the barriers and opportunities that exist to enable small and midsize communities to partake in the PEV market and benefit from the economic and environmental advantages of PEVs. In order to gain insight into these challenges and barriers, DOE selected a success story (i.e., Drive Electric Vermont) as the subject of this case study, as the state of Vermont is tied with Detroit, Michigan in having the highest percentage of 2014 (most recent complete data) PEV registrations for cold weather U.S. cities and has seen more than a sixfold increase in charging stations over the last three years. The overall objective of this case study was to use the lessons learned from Drive Electric Vermont to determine what activities are most effective at encouraging acquisitions of PEVs and deployment of charging infrastructure in small to midsize communities, prioritizing and sequencing their implementation, identifying robust means for extrapolation, and applying this understanding to other small to midsize communities across the nation. The Drive Electric Vermont Program was formed in 2012 with a goal of increasing the use of electrified transportation in Vermont through policy development, education and outreach, and infrastructure development. The Drive Electric Vermont Program can be broadly broken into four components: (1) strategic planning/leadership, (2) stakeholder/partnership development, (3) education and outreach, and (4) incentives. The early phases of the program focused heavily on strategic planning, and stakeholder and partnership development, followed by a transition to education and outreach activities, charging infrastructure development, and grant and incentive programs

  6. Laser fusion study. Final report, volume I, study results

    International Nuclear Information System (INIS)

    The primary goal of this study was to devise, evaluate, and conceptually design a complete, end-to-end, alignment system capable of handling 30 to 32 Shiva amplifier chains to specified accuracies in space and time. A secondary goal was to accomplish the primary goal with an acceptably low development and procurement cost and with an acceptably high day-after-day performance reliability. This report presents such a system: it is comprised of sensors, actuating mechanisms, controls, and displays that perform well within the current art-state. (U.S.)

  7. CFD simulation in emptying tanks for calculating submergence in the case of storage tanks, the CFD simulation is based on the modeling of the suction nozzle which affects the study and final part of the storage tank

    International Nuclear Information System (INIS)

    The study consists in simulating the emptying of the tank when the water level is near the level of the suction nozzle. The objective pursued is to detect the harmful phenomena that may occur in aspiration, ranging from the appearance of vortices and bubble formation to excessive fluid accelerations. (Author)

  8. Roadmaster Roading Contractors Case Study

    Directory of Open Access Journals (Sweden)

    Hazel Taylor

    1999-01-01

    Full Text Available Systems analysis students seldom experience the practical difficulties of the initial investigation into a client’s requirements. They get little chance to practice the skills they need to investigate complex and confused problem situations, or to appreciate the wider organizational issues that can impact on a situation. This teaching case is designed to give students the opportunity to practice and apply investigation skills and to challenge them to consider the wider work environment when considering possible solutions to a problem situation. The case is conducted as a role-play, with students acting as systems analysts and teaching staff role-playing the clients. The students develop a report analyzing the client’s situation based on the issues that arise during the interviews. Feed-back sessions focus on discussing how well the students applied various interviewing strategies previously covered in lectures, and on the wider organizational problems that could impact proposed information system solutions.

  9. Associative Visual Agnosia: A Case Study

    OpenAIRE

    A. Charnallet; S. Carbonnel; David, D; O. Moreaud

    2008-01-01

    We report a case of massive associative visual agnosia. In the light of current theories of identification and semantic knowledge organization, a deficit involving both levels of structural description system and visual semantics must be assumed to explain the case. We suggest, in line with a previous case study [1], an alternative account in the framework of (non abstractive) episodic models of memory [4].

  10. Study on Case Teaching of Financial Management

    Science.gov (United States)

    Che, Zhenghong; Che, Zhengmei

    2011-01-01

    Case teaching is an efficient teaching method of management. It plays an important role to enhance the students' ability to practice the theory. However, case teaching of financial management has not achieved the expected results. The paper aims to study the importance, characteristics and corresponding methods of case teaching method of financial…

  11. Interdisciplinary studies on the long-term safety of an underground waste repository in salt rock in case of solution ingress. More precise definition of modelling requirements. Final report

    International Nuclear Information System (INIS)

    The study investigates how and to what extent numerical models will be able to describe the geomechanical, hydrological and geochemical effects and their interactions in the event of influx of solutions into potassium and salt rock shafts. Cause-and-effect mechanisms are discussed, taking into account mass transfer, dissolution processes, permeability, porosity, rock mechanics and stresses, hydraulic pressure, and reactions of solutions and salt rock. (DG)

  12. Multnomah County Hydrokinetic Feasibility Study: Final Feasibility Study Report

    Energy Technology Data Exchange (ETDEWEB)

    Spain, Stephen

    2012-03-15

    HDR has completed a study of the technical, regulatory, and economic feasibility of installing hydrokinetic turbines under the Morrison, Broadway, and Sellwood bridges. The primary objective of installing hydrokinetic turbines is a demonstration of in-stream hydrokinetic technologies for public education and outreach. Due to the low gradient of the Lower Willamette and the effects of the tide, velocities in the area in consideration are simply not high enough to economically support a commercial installation. While the velocities in the river may at times provide enough energy for a commercial turbine to reach capacity, the frequency and duration of high flow events which provide suitable velocities is not sufficient to support a commercial hydrokinetic installation. We have observed that over an 11 year period, daily average velocities in the Lower Willamette exceeded a nominal cut-in speed of 0.75 m/s only 20% of the time, leaving net zero power production for the remaining 80% of days. The Sellwood Bridge site was estimated to have the best hydrokinetic resource, with an estimated average annual production of about 9,000 kWh. The estimated production could range from 2,500 kWh to 15,000 kWh. Based on these energy estimates, the amount of revenue generated through either a power purchase agreement (PPA) or recovered through net metering is not sufficient to repay the project costs within the life of the turbine. The hydrokinetic resource at the Morrison and Broadway Bridges is slightly smaller than at the Sellwood Bridge. While the Broadway and Morrison Bridges have existing infrastructure that could be utilized, the project is not expected to generate enough revenue to repay the investment. Despite low velocities and energy production, the sites themselves are favorable for installation of a demonstration or experimental project. With high public interest in renewable energy, the possibility exists to develop a hydrokinetic test site which could provide

  13. Academic Planning: Four Institutional Case Studies.

    Science.gov (United States)

    Kieft, Raymond N.

    As part of a project studying intrainstitutional planning, management, and evaluation, four case studies were undertaken in 1976 of academic planning at Villa Maria College, Kansas City Metropolitan Community College District, West Virginia University, and Western Washington University. The case studies were part of an ongoing project, the…

  14. The Danish National Case Study Report

    DEFF Research Database (Denmark)

    Brodersen, Søsser; Jørgensen, Michael Søgaard

    Three case studies from Danish science shops within the environmental field are analysed with respect to societal background, interaction between the involved actors and the societal impact of the co-operation. The report is one of the seven national case study reports from the EU-financed INTERA......Three case studies from Danish science shops within the environmental field are analysed with respect to societal background, interaction between the involved actors and the societal impact of the co-operation. The report is one of the seven national case study reports from the EU......-financed INTERACTS project....

  15. Study of elimination of vapor atom deposition. Final report

    International Nuclear Information System (INIS)

    The major objective of this study was to define and evaluate methods by which an optical system could be protected from performance degradation arising from exposure to a beam of heavy metal atoms. The optical system is coupled to a chamber in which the metal atoms are being produced and processed. The coupling aperture is the source of the contaminating metal atom beam, which, if un-attenuated, would degrade the system performance in an unacceptably short period of time. It was agreed early in the program to concentrate on a gaseous scattering technique, with a stated objective of metal beam flux reduction of about 106. Additional constraints require that the scattering gas must not effuse back into the main process chamber at such a rate that it has significant effect on the vacuum level in the chamber, which is of the order of 10-6 torr; finally, the path length between the main chamber and the optical system must not be increased unduly. This report summarizes the analyses that were performed under the program. Section 2 presents a summary review, while the details of the analyses are described in Section 3. Recommendations leading toward final system design are given in Section 4. Finally, an appendix contains a description and printout of a program that was developed and used to facilitate the evaluation of system performance parametrically. 6 refs., 9 figs

  16. Final Report on User Interface Studies, Cognitive and User Modelling

    OpenAIRE

    Carl, Michael; García-Martínez, Mercedes; Hill, Robin; Keller, Frank; Mesa-Lao, Bartolomé; Schaeffer, Moritz

    2014-01-01

    D1.3 marks the final CASMACAT report on user interface studies, cognitive and user modelling covering the completion of tasks T1.5 (Cognitive Modelling) and T1.6 (User Modelling) as part of Work Package 1. Within tasks T1.1 to T1.4, a series of experiments have established a solid understanding of human behaviour in computer-aided translation, focusing on the use of visualization options, different translation modalities, individual differences in translation production, transl...

  17. Giant adrenal cyst: case study.

    Science.gov (United States)

    Poiana, Catalina; Carsote, Mara; Chirita, Corina; Terzea, Dana; Paun, S; Beuran, M

    2010-01-01

    One of the rarest situations regarding an adrenal incidentaloma is an adrenal cyst. We present the case of a 61-year-old male patient diagnosed with peritonitis. During surgery, a right adrenal tumor of 2 cm is discovered. The patient was referred to endocrinology. 6 months later the diameter of the tumor is 7 times bigger than the initial stage. It has no secretory phenotype, except for the small increase of serum aldosterone and the 24-h 17-ketosteroids. Open right adrenalectomy is performed and a cyst of 15 cm is removed. The evolution after surgery is good. The pathological exam reveals an adrenal cyst with calcifications and osteoid metaplasia. The immunohistochemistry showed a positive reaction for CD34 and ACT in the vessels and VIM in the stroma. The adrenal cysts are not frequent and represent a challenge regarding the preoperative diagnostic and surgical procedure of resection. The pathological exam highlights the major aspects. PMID:20945822

  18. Jellyfish, jellypress and jellyperception: Final report - Belgian case study

    OpenAIRE

    Vandendriessche, S.; Vansteenbrugge, L.; K. Hostens; Maelfait, H.

    2013-01-01

    During the last decades, the number of reports on invasions and blooms of jellyfish has increased, both in scientific literature as in the general media. There is however no clarity about a global rise of gelatinous zooplankton due to the lack of extended time series, and due to the fact that public perception is potentially driven by the media. However, public perception is a key driver in policy decisions, including coastal zone governance and research funding. Consequently, it is useful to...

  19. Library Power in Philadelphia: Final Report from Seven Case Studies.

    Science.gov (United States)

    Useem, Elizabeth; Coe, Cati

    Library Power seeks to activate an underutilized resource--a school's library program--in ways that promote schoolwide changes in the curriculum and instruction. This three-year initiative of the DeWitt Wallace-Readers' Digest Fund, located in 19 sites across the country, connects elementary and middle school libraries more directly to classroom…

  20. Final report for NIF chamber dynamics studies. Final report (May 1997), Subcontract No. B291847

    International Nuclear Information System (INIS)

    The National Ignition Facility (NIF), a 1.8 MJ, 192 laser beam facility, will have anticipated fusion yields of up to 20 MJ from D-T pellets encased in a gold hohlraum target. The energy emitted from the target in the form of x rays, neutrons, target debris kinetic energy, and target shrapnel will be contained in a 5 m. radius spherical target chamber. Various diagnostics will be stationed around the target at varying distances from the target. During each shot, the target will emit x rays that will vaporize nearby target facing surfaces including those of the diagnostics, the target positioner, and other chamber structures. This ablated vapor will be transported throughout the chamber, and will eventually condense and deposit on surfaces in the chamber, including the final optics debris shields. The research at the University of California at Berkeley relates primarily to the NIF chamber dynamics. The key design issues are the ablation of the chamber structures, transport of the vapor through the chamber and the condensation or deposition processes of those vaporized materials. An understanding of these processes is essential in developing a concept for protecting the final optics debris shields from an excessive coating (> 10 Angstrom) of target debris and ablated material, thereby prolonging their lifetime between change- outs. At Berkeley, we have studied the physical issues of the ablation process and the effects of varying materials, the condensation process of the vaporized material, and design schemes that can lower the threat posed to the debris shields by these processes. In addition to the work described briefly above, we performed extensive analysis of the target-chamber thermal response to in- chamber CO2 Cleaning and of work performed to model the behavior of silica vapor. The work completed this year has been published in several papers and a dissertation -6 This report provides a summary of the work completed this year, as well as copies of

  1. Five case studies of multifamily weatherization programs

    Energy Technology Data Exchange (ETDEWEB)

    Kinney, L; Wilson, T.; Lewis, G. [Synertech Systems Corp. (United States); MacDonald, M. [Oak Ridge National Lab., TN (United States)

    1997-12-31

    The multifamily case studies that are the subject of this report were conducted to provide a better understanding of the approach taken by program operators in weatherizing large buildings. Because of significant variations in building construction and energy systems across the country, five states were selected based on their high level of multifamily weatherization. This report summarizes findings from case studies conducted by multifamily weatherization operations in five cities. The case studies were conducted between January and November 1994. Each of the case studies involved extensive interviews with the staff of weatherization subgrantees conducting multifamily weatherization, the inspection of 4 to 12 buildings weatherized between 1991 and 1993, and the analysis of savings and costs. The case studies focused on innovative techniques which appear to work well.

  2. Theoretical pluralism in psychoanalytic case studies

    Science.gov (United States)

    Willemsen, Jochem; Cornelis, Shana; Geerardyn, Filip M.; Desmet, Mattias; Meganck, Reitske; Inslegers, Ruth; Cauwe, Joachim M. B. D.

    2015-01-01

    The aim of this study is to provide an overview of the scientific activity of different psychoanalytic schools of thought in terms of the content and production of case studies published on ISI Web of Knowledge. Between March 2013 and November 2013, we contacted all case study authors included in the online archive of psychoanalytic and psychodynamic case studies (www.singlecasearchive.com) to inquire about their psychoanalytic orientation during their work with the patient. The response rate for this study was 45%. It appears that the two oldest psychoanalytic schools, Object-relations psychoanalysis and Ego psychology or “Classical psychoanalysis” dominate the literature of published case studies. However, most authors stated that they feel attached to two or more psychoanalytic schools of thought. This confirms that the theoretical pluralism in psychoanalysis stretches to the field of single case studies. The single case studies of each psychoanalytic school are described separately in terms of methodology, patient, therapist, or treatment features. We conclude that published case studies features are fairly similar across different psychoanalytic schools. The results of this study are not representative of all psychoanalytic schools, as some do not publish their work in ISI ranked journals. PMID:26483725

  3. Implementation of PV plants in Spain: A case study

    Energy Technology Data Exchange (ETDEWEB)

    Diez-Mediavilla, M.; Alonso-Tristan, C. [Dpto. Ingenieria Electromecanica, Escuela Politecnica Superior. Universidad de Burgos, Avda. Cantabria s/n, 09006 Burgos (Spain); Rodriguez-Amigo, M.C.; Garcia-Calderon, T. [Dpto. Matematicas y Computacion Escuela Politecnica Superior. Universidad de Burgos, Avda. Cantabria s/n, 09006 Burgos (Spain)

    2010-05-15

    The implementation process of a photovoltaic system and its connection to the national grid in Spain is examined from an economic, an administrative and a legal standpoint. In the first place, this case study describes the solar farm, and it goes on to examine the economic aspects of electricity production, its associated costs, and relevant grants and financial subsidies. Finally, problems related to the administration of the project and the issuing of permits by local and regional authorities are discussed. (author)

  4. Rebranding: a Case Study Approach

    OpenAIRE

    Size, Maria, (Thesis)

    2005-01-01

    The primary objective of this study is to explore how and why companies implement rebranding campaigns. The study stemmed from a realisation by the author that the area of rebranding is very much under-researched academically although anecdotal evidence indicates and increase in the occurrence of the phenomenon in recent years. Therefore the purpose of this research is to add to the insufficient body of literature on rebranding through exploring it from a corporate perspective. The two chapte...

  5. Outage management: A case study

    International Nuclear Information System (INIS)

    Outage management issues identified from a field study conducted at a two-unit commercial pressurized water reactor (PWR), when one unit was in a refueling outage and the other unit was at full power operation, are the focus of this paper. The study was conduced as part of the US Nuclear Regulatory Commission's (NRC) organizational factors research program, and therefore the issues to be addressed are from an organizational perspective. Topics discussed refer to areas identified by the NRC as critical for safety during shutdown operations, including outage planning and control, personnel stress, and improvements in training and procedures. Specifically, issues in communication, management attention, involvement and oversight, administrative processes, organizational culture, and human resources relevant to each of the areas are highlighted by example from field data collection. Insights regarding future guidance in these areas are presented based upon additional data collection subsequent to the original study

  6. Outage management: A case study

    Energy Technology Data Exchange (ETDEWEB)

    Haber, S.B.; Barriere, M.T. (Brookhaven National Lab., Upton, NY (United States)); Roberts, K.H. (California Univ., Berkeley, CA (United States). Walter A. Haas School of Business)

    1992-01-01

    Outage management issues identified from a field study conducted at a two-unit commercial pressurized water reactor (PWR), when one unit was in a refueling outage and the other unit was at full power operation, are the focus of this paper. The study was conduced as part of the US Nuclear Regulatory Commission's (NRC) organizational factors research program, and therefore the issues to be addressed are from an organizational perspective. Topics discussed refer to areas identified by the NRC as critical for safety during shutdown operations, including outage planning and control, personnel stress, and improvements in training and procedures. Specifically, issues in communication, management attention, involvement and oversight, administrative processes, organizational culture, and human resources relevant to each of the areas are highlighted by example from field data collection. Insights regarding future guidance in these areas are presented based upon additional data collection subsequent to the original study.

  7. Outage management: A case study

    Energy Technology Data Exchange (ETDEWEB)

    Haber, S.B.; Barriere, M.T. [Brookhaven National Lab., Upton, NY (United States); Roberts, K.H. [California Univ., Berkeley, CA (United States). Walter A. Haas School of Business

    1992-09-01

    Outage management issues identified from a field study conducted at a two-unit commercial pressurized water reactor (PWR), when one unit was in a refueling outage and the other unit was at full power operation, are the focus of this paper. The study was conduced as part of the US Nuclear Regulatory Commission`s (NRC) organizational factors research program, and therefore the issues to be addressed are from an organizational perspective. Topics discussed refer to areas identified by the NRC as critical for safety during shutdown operations, including outage planning and control, personnel stress, and improvements in training and procedures. Specifically, issues in communication, management attention, involvement and oversight, administrative processes, organizational culture, and human resources relevant to each of the areas are highlighted by example from field data collection. Insights regarding future guidance in these areas are presented based upon additional data collection subsequent to the original study.

  8. Ripeness sensor development. Final report of a Phase 2 study

    Energy Technology Data Exchange (ETDEWEB)

    Stroshine, R.

    1995-08-01

    This is a final report for the Phase II study entitled ``Ripeness Sensor Development.`` The overall objective of the study was the development of a prototype device capable of testing whole fruits for sugar content. Although ripeness and sugar content are not synonymous, they are closely related. Furthermore, the consumer`s acceptance of or preference for fruits is strongly influenced by sugar content. Therefore, the device was called a ripeness sensor. The principle behind the measurement is proton magnetic resonance ({sup 1}H-MR). For several decades, chemists, pharmacists and other scientists have been using {sup 1}H-MR to investigate chemical structure and composition. More recently, the technique has been used in laboratories of the food industry for quality control. This effort represents one of the first attempts to adapt {sup 1}H-MR to use in a commercial facility. 28 refs., 36 figs., 7 tabs.

  9. Case Study Methodology and Homelessness Research

    Directory of Open Access Journals (Sweden)

    Jill Pable

    2013-10-01

    Full Text Available This paper describes the potential suitability of case study methodology for inquiry with the homeless population. It references a research study that uses case study research method to build theory. This study's topic is the lived experience of destitute individuals who reside in homeless shelters, and explores the homeless shelter built environment's potential influence on resident satisfaction and recovery. Case study methodology may be appropriate because it explores real-life contextual issues that characterize homelessness and can also accommodate the wide range of homeless person demographics that make this group difficult to study in a generalized fashion. Further, case study method accommodates the need within research in this area to understand individualized treatments as a potential solution for homelessness.

  10. Comparative evaluation of energy-related aspects in urban and in rural districts - Case study in the Canton of Neuchatel, Switzerland; Analyse comparative des aspects energetiques de quartiers urbains et ruraux. Etude de cas dans le canton de Neuchatel. Rapport final

    Energy Technology Data Exchange (ETDEWEB)

    Perret, L.; Vuilleumier, R.; Bonhote, P. [Planair SA, La Sagne (Switzerland); Rey, E. [Bauart Architectes et Urbanistes SA, Neuchatel (Switzerland)

    2007-07-01

    The project aims at identifying the energy impact of various current ways of regional planning through a case study of eight districts in the canton of Neuchatel. The districts reveal the trends of planning in an urban centre, and in incorporated (suburb) or unincorporated territory. Thus, the influence of the distance to the centre of the agglomeration named 'centrality' has been studied. The energy expenditure for the buildings' construction phase (buildings, roads, networks) and utilization phase (heating, electricity, water, waste, networks) has been taken into account as well as the mobility. The energy investments have been evaluated by the method SNARC. The energy expenditure for operation and mobility has been evaluated based on questionnaires addressed to the inhabitants. As a result, the variable 'centrality' has only a weak role on the life cycle analysis (LCA) per inhabitant. In our case, the LCA for incorporated districts (suburb) and unincorporated districts are similar. With a LCA per square meter, the impact is completely similar and no correlation with the variable 'centrality' has been noticed. As the households are larger per inhabitants when the district is located in a suburban zone, the LCA per square meter remains stable. On the contrary, if the LCA is determined per household, the LCA is perfectly correlated with the variable 'centrality'. Thus, a household in the centre of Neuchatel consumes twice less energy resources than a household in Val-of-Ruz (rural area). The study highlights also the critical impacts of a LCA on a district scale. Finally, this study gives recommendations based on the energy and demographic prospects in order to respond to the objective of a 2000 watts society. (author)

  11. A Case Study of Engineering Ethics

    Science.gov (United States)

    Shimizu, Kazuo

    In Engineering Ethics Class at Shizuoka University, the Code of Ethics and Cases for Electrical Engineers by IEEJ Ethics committee is used to promote for high education effect to correspond large number of students (140students). In this paper, a case study in the class, and survey results for ethics value of students are presented. In addition, some comments for role playing act on the case of virtual experiences by students are described.

  12. Study of electron and neutrino interactions. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Abashian, A.

    1997-03-18

    This is the final report for the DOE-sponsored experimental particle physics program at Virginia Tech to study the properties of the Standard Model of strong and electroweak interactions. This contract (DE-AS05-80ER10713) covers the period from August 1, 1980 to January 31, 1993. Task B of this contract, headed by Professor Alexander Abashian, is described in this final report. This program has been pursued on many fronts by the researchers in a search for axions at SLAC, in electron-positron collisions in the AMY experiment at the TRISTAN collider in Japan, in measurements of muon decay properties in the MEGA and RHO experiments at the LAMPF accelerator, in a detailed analysis of scattering effects in the purported observation of a 17 keV neutrino at Oxford, in a search for a disoriented chiral condensate with the MiniMax experiment at Fermilab, and in an R&D program on resistive plate counters that could find use in low-cost high-quality charged particle detection at low rates.

  13. Environmental contracting: a case study

    OpenAIRE

    Kubiak, Joseph C.

    1994-01-01

    Approved for public release, distribution unlimited The end of cold war levels of defense expenditures has promoted the reduction in the number of defense-related companies, creating potential monopolistic economic scenarios for defense procurement. This thesis studies one methodology to deal with these scenarios, based on the Baron-Myerson monopolist regulation mechanisms. The Baron-Myerson mechanism provides a tool to regulate monopolists when their costs are unknown or cannot be measure...

  14. Marketing-Indonesia case study

    OpenAIRE

    Kurniawan, Iwan; Roshetko, James M.

    2007-01-01

    The purpose of research are (1) to identify the potential VAF species or products for Nanggung Farmers; (2) identify market channels & marketing problems; (3) enhances farmers' understanding of market mechanism; and (4) identify opportunities to improve the quantity & quality of VAF. The study was conducted on Sept-Oct 2006. Data and information are collected through Focus Group Discussion (FGD) in each village that attended both men and women. LTRA-5 (Agroforestry and Sustainable Vegetabl...

  15. Linguistic Overgeneralization: A Case Study

    Directory of Open Access Journals (Sweden)

    Wasan Nazar Al-Baldawi

    2011-08-01

    Full Text Available The current study described a single child’s language acquisition. The importance of this study resided in the circumstances and the environment in which the child lived. He came from a family in which the parents were from different countries and cultures; spoke different Arabic dialects and who lived in a country in which English is spoken. The child was in his critical period of language acquisition. He seemed to have established a unique way of communicating with people surrounding him to cope with all the linguistic varieties around him. The study showed that the child had semantic, syntactic and morphological overgeneralized structures. The data and results showed that overgeneralization and language acquisition were primarily an innate faculty of the human mind and that imitation did played a primary role in language acquisition.It showed, nevertheless, that imitation and behaviorist approaches could not fully account for language acquisition nor did the generative approach. The results went in favor of an Emergentist approach of language acquisition where both innateness and imitations were crucial constituents of children’s acquisition of linguistic forms.

  16. Case Study: A Strategic Research Methodology

    Directory of Open Access Journals (Sweden)

    Khairul B.M. Noor

    2008-01-01

    Full Text Available This research reviews the literature on case study as a strategic qualitative research methodology. Although case studies have been criticised by some authors as lacking scientific rigour and do not address generalizability, this research, however, reiterated its appropriateness when dealing with a process or a complex real-life activities in great-depth. Case study has been commonly used in social science fields like sociology, industrial relations and anthropology eventhough generally was considered an underutilized strategy. Hence, this research explained the general concept of a case study, strengths and weaknesses of using this method knowing that theoretically case is exciting and data rich. Based on a study of four organizations and the researcher’s own experience, this article described matters on how case study was undertaken, gaining excess to those organizations and the systematic process of data collection and triangulation (multiple techniques. It was noted that combining multiple techniques for elicitng data in case study research actually strengthens and confirmed results.

  17. Brick handling: a case study.

    Science.gov (United States)

    Webb, R D; Handyside, J

    1982-09-01

    A small change in brick dimensions resulted in an increase in the perceived work-load of men loading and unloading pallets of bricks by hand. A laboratory study indicated that the change in brick dimensions required changes in grip pattern in order to unload bricks at the same rate, moving the same number at a time. These changed grip patterns resulted in increased upper body movement, increased chest-muscle activity and higher heart rates. These differences were reflected in higher subjective ratings of fatigue. PMID:15676442

  18. Ownership and Control Structures: A Case Study

    OpenAIRE

    Apostolov, Mico

    2015-01-01

    This is a study on separation of ownership and control in Southeast Europe, and in particular it is a case study of Macedonia. For structured analysis of this case study we use the World Bank Microdata Library, specifically the Enterprise Surveys which contains firm-level data of a representative sample of economies private sectors. What we are interested in are the ties of ownership and control and whether such linkages contribute to the development of domestic firms and the overall ec...

  19. Digital dentistry and implant dentistry--a case study.

    Science.gov (United States)

    Zimmermann, Richard; Seitz, Stefanie; Nyugen, Donald

    2014-04-01

    In the area of fixed prosthodontics, implants have evolved to become the gold standard in terms of longevity and esthetic outcome (1). As in all of dentistry, careful diagnosis and treatment planning is a must to achieve an optimum result. When evaluating the recipient site, one must determine if any type of defect (hard or soft tissue) exists which would require augmentation. The existing occlusion must also be evaluated to ensure the dentist is aware of possible prosthetic complications. In straightforward cases, such as those without the need for augmentation, the conventional timeline requires a waiting period of 3 months following surgical placement to begin the restorative procedures. Factoring in the restorative time frame, the patient may wait up to approximately 4 months for the final implant prosthesis. Various advancements in dentistry are changing the way dentists approach implant dentistry--from diagnosis and treatment planning to final restorations. This article illustrates these advances through a case study. PMID:24937892

  20. Case studies of steel structure failures

    Directory of Open Access Journals (Sweden)

    P. Bernasovský

    2010-01-01

    Full Text Available The contribution deals with some case studies of steel structure failures, which happened in Slovakia a few years ago. Features of cracking are illustrated on real cases of breakdowns in the transmission gas pipelines, at the cement works and in the petrochemical indus-try. All failures were caused by an incorrect technical approach. Possible remedial measures are proposed.

  1. Case Studies of Environmental Risks to Children.

    Science.gov (United States)

    Goldman, Lynn R.

    1995-01-01

    Presents case studies on children's exposure to pesticides, including risks through the use of the insecticide aldicarb on bananas, the home use of diazinon, and the use of interior house paint containing mercury. These cases illustrate how regulatory agencies, parents, health-care providers, and others who come into contact with children have…

  2. Abbreviated Case Studies in Organizational Communication

    Science.gov (United States)

    Wanguri, Deloris McGee

    2005-01-01

    The cases contained within organizational communication texts are generally two to three pages, often followed by questions. These case studies are certainly useful. They generally describe events in the present, provide some type of organizational context, include first-hand data, include a record of what people say and think, develop a…

  3. Case study on printed matter

    DEFF Research Database (Denmark)

    global warming, acidification and nutrification. The studies focus on energy consumption including the emissions and impact categories related to energy. The chemical-related impact categories comprising ecotoxicity and human toxicity are not included at all or only to a limited degree. In this paper we...... European/global ones are used for sensitivity analysis. The weighting factors for the impact categories are based on political reduction targets. Conlusion  The distribution of potential environmental impacts along the life cycle of a generic printed matter produced on a model sheet feed offset printing...... distribution of potential environmental impacts and consumption of resources along the life cycle of a generic printed matter produced on a model sheet feed offset printing industry in Europe. Main activities at all stages in the life cycle are covered. However special focus is on the production stage but...

  4. A network security case study

    International Nuclear Information System (INIS)

    This paper reports on a study to validate the Graphical Network Representation (GRPHREP) model which is being conducted on the Los Alamos National Laboratory Integrated Computer Network (ICN). The GRPHREP model is a software system application based on graph theory and object-oriented programming methodologies. It codified the Department of Energy (DOE) Order 5637.1, which is concerned with classified computer secret policy, restrictions, and requirements. The Los Alamos ICN is required to control access to and support large-scale scientific and administrative computing. Thus, large-scale scientific and administrative computing. Thus we felt that this large, complex, and dynamic network would provide a good test for the graphical and functional capabilities of the model. Furthermore, the ICN is composed of multiple partitions that reflect the sensitivity and classification of the computation (data) and designate the required clearance level for the user

  5. Anatomy studies for an artificial heart. Final summary report

    International Nuclear Information System (INIS)

    In the interval from February of 1972 through December of 1977, studies were conducted relating to the anatomical feasibility of implanting a total artificial heart system. These studies included both the calf as an experimental animal as well as the ultimate human recipient of the artificial heart system. Studies with the calf included definition of the thoracic anatomy relative to the size, shape, and vascular connections for implanting the blood pump. To test the animal's tolerance to an implanted engine system, mockups of the thermal converter were implanted chronically in various locations within the calf. No problems developed in retroperitoneal or intraperitoneal implants ranging from 8 to 15 months. A study to determine accelerations experienced by an abdominally implanted thermal converter was performed in calves. Under the most severe conditions, accelerations of a maximum of 34 Gs were experienced. The largest effort was devoted to defining the human anatomy relative to implanting an artificial heart in the thorax. From a number of data sources, including cadavers as well as living patients, a quantitative, statistical analysis of the size and shape of the male thorax was obtained. Finally, an in vivo study of a functional intrathoracic compliance bag in a calf demonstrated the feasibility of this method

  6. Mining Product Data Models: A Case Study

    OpenAIRE

    Cristina-Claudia DOLEAN

    2014-01-01

    This paper presents two case studies used to prove the validity of some data-flow mining algorithms. We proposed the data-flow mining algorithms because most part of mining algorithms focuses on the control-flow perspective. First case study uses event logs generated by an ERP system (Navision) after we set several trackers on the data elements needed in the process analyzed; while the second case study uses the event logs generated by YAWL system. We offered a general solution of data-flow m...

  7. Case study in professionally-oriented training

    Directory of Open Access Journals (Sweden)

    Valitov Shamil M.

    2016-01-01

    Full Text Available Modern educational technologies are based on competence approach and focus on the future professional activity. Case study is one of the most significant technologies in modern higher education. The basic concepts used in the case study method are a “situation” and an “analysis”, as well as their derivative - “analysis of the situation”. The case study method of is one of the best tools for gaining experience, as it investigates practical situations that occur in managerial job. It combines theoretical knowledge with the analysis of the actual practical experience in accordance with a major. Doing case studies students read the description of the situation and offer divergent projects of managerial decisions that could be used by real managers dealing with the problem posed by the case study author. Answers to the questions posed in the case description are not given, as a rule, since the main purpose in the case analysis is to organize a discussion in the classroom or provoke speculations of those who do the self-study.

  8. Waste package/repository impact study: Final report

    Energy Technology Data Exchange (ETDEWEB)

    1985-09-01

    The Waste Package/Repository Impact Study was conducted to evaluate the feasibility of using the current reference salt waste package in the salt repository conceptual design. All elements of the repository that may impact waste package parameters, i.e., (size, weight, heat load) were evaluated. The repository elements considered included waste hoist feasibility, transporter and emplacement machine feasibility, subsurface entry dimensions, feasibility of emplacement configuration, and temperature limits. The evaluations are discussed in detail with supplemental technical data included in Appendices to this report, as appropriate. Results and conclusions of the evaluations are discussed in light of the acceptability of the current reference waste package as the basis for salt conceptual design. Finally, recommendations are made relative to the salt project position on the application of the reference waste package as a basis for future design activities. 31 refs., 11 figs., 11 tabs.

  9. Waste package/repository impact study: Final report

    International Nuclear Information System (INIS)

    The Waste Package/Repository Impact Study was conducted to evaluate the feasibility of using the current reference salt waste package in the salt repository conceptual design. All elements of the repository that may impact waste package parameters, i.e., (size, weight, heat load) were evaluated. The repository elements considered included waste hoist feasibility, transporter and emplacement machine feasibility, subsurface entry dimensions, feasibility of emplacement configuration, and temperature limits. The evaluations are discussed in detail with supplemental technical data included in Appendices to this report, as appropriate. Results and conclusions of the evaluations are discussed in light of the acceptability of the current reference waste package as the basis for salt conceptual design. Finally, recommendations are made relative to the salt project position on the application of the reference waste package as a basis for future design activities. 31 refs., 11 figs., 11 tabs

  10. Antiphospholipid syndrome: A case study

    International Nuclear Information System (INIS)

    Full text: A forty-two-year-old male presented to the Royal Adelaide Hospital with symptoms of increasing shortness of breath, swelling in both ankles, petechial rash and blood in his sputum. Initial investigations showed cardiomegaly, right ventricular hypertrophy, patchy lung infiltrates, a platelet count of 1500 and a clotting time of 60 seconds. A V/Q scan indicated a high probability of pulmonary embolism. Further investigations showed that the patient was positive for lupus anticoagulant and cardiolipin antibodies. A diagnosis of primary antiphospholipid syndrome was made. The patient''s high risk of strokes and hemorrhaging prompted investigation by a 99mTc-HMPAO brain scan. Further V/Q scans were performed to follow up the initial finding of multiple pulmonary embolism and a R-L shunt study was performed to investigate a left subclavian murmur. The patient was admitted for four weeks and began treatment which included cyclaphosphamide, corticosteroids and plasmaphoresis and was discharged when stable. Over the next six months he was re admitted three times for relapse of antiphospholipid syndrome. On his fourth admission he collapsed and died five hours after admission. Cause of death was due to cardiac arrhythmia secondary to severe right ventricular hypertrophy and dilation. The effects of antiphospholipid syndrome was believed to be responsible for this outcome

  11. Antiphospholipid syndrome: A case study

    Energy Technology Data Exchange (ETDEWEB)

    Davies, T. [Royal Adelaide Hospital, Adelaide, SA (Australia). Department of Nuclear Medicine

    1998-03-01

    Full text: A forty-two-year-old male presented to the Royal Adelaide Hospital with symptoms of increasing shortness of breath, swelling in both ankles, petechial rash and blood in his sputum. Initial investigations showed cardiomegaly, right ventricular hypertrophy, patchy lung infiltrates, a platelet count of 1500 and a clotting time of 60 seconds. A V/Q scan indicated a high probability of pulmonary embolism. Further investigations showed that the patient was positive for lupus anticoagulant and cardiolipin antibodies. A diagnosis of primary antiphospholipid syndrome was made. The patient``s high risk of strokes and hemorrhaging prompted investigation by a {sup 99}mTc-HMPAO brain scan. Further V/Q scans were performed to follow up the initial finding of multiple pulmonary embolism and a R-L shunt study was performed to investigate a left subclavian murmur. The patient was admitted for four weeks and began treatment which included cyclaphosphamide, corticosteroids and plasmaphoresis and was discharged when stable. Over the next six months he was re admitted three times for relapse of antiphospholipid syndrome. On his fourth admission he collapsed and died five hours after admission. Cause of death was due to cardiac arrhythmia secondary to severe right ventricular hypertrophy and dilation. The effects of antiphospholipid syndrome was believed to be responsible for this outcome.

  12. Towards More Case Study Research in Entrepreneurship

    Directory of Open Access Journals (Sweden)

    Tom Duxbury

    2012-03-01

    Full Text Available Entrepreneurship as an emerging discipline has made good strides, but according to some, has fallen short of bringing its theory and literature up to the standards of others in the management sciences. Rich with the descriptive detail needed for insightful theory building in entrepreneurship, scholars have called for more case study research, particularly those incorporating non-retrospective and longitudinal observations. At the same time however, it has become rare to find such research published in A-level journals dedicated to entrepreneurship. A survey presented here of major entrepreneurship journals over the past six years revealed a publication rate of only 3% using the case study method. This presents a major impediment for developing fresh research in this field based upon the study of real cases. The author explores how the case study method has been applied to entrepreneurship research and provides recommendations for improved publication rates.

  13. BTS Case Study: The Galloway Family Home

    International Nuclear Information System (INIS)

    Case study of an energy-efficient Habitat for Humanity house that uses 30% less energy than conventional residential construction. The project was part of the Jimmy Carter Work Project in rural Appalachia in 1997

  14. Educational Potential of Case-Study Technology

    OpenAIRE

    Fedorinova, Zoya Vladimirovna; Vorobyeva, Viktoriya Vladimirovna; Malyanova, Marina

    2015-01-01

    This article presents the results of phenomenological and typological analysis of case-study technology educational potential. The definition “educational potential of case-study technology” is given, the main characteristics of which are changed in communication and collaborative activity quality, appearance of educational initiatives, change of participants’ position in learning process, formation of “collective subject” in collaborative activity, increase of learning (subject) results. Dep...

  15. SYNONYMS IN ACTION: A CASE STUDY

    OpenAIRE

    Rebecca Clift

    2003-01-01

    This paper discusses what the methods of conversation analysis (CA) might have to offer the study of linguistic synonymy. It takes as a case study two items commonly held to be synonyms -'actually' and 'in fact'- and shows considerable differences between the two in their interactional implementation: they are implicated in the prosecution of differing courses of action. Such cases argue that it is analytically more profitable to consider what a lexical item does in the context of talk than w...

  16. TOP-10 DATA MINING CASE STUDIES

    OpenAIRE

    GABOR MELLI; XINDONG WU; PAUL BEINAT; FRANCESCO BONCHI; LONGBING CAO; RONG DUAN; CHRISTOS FALOUTSOS; RAYID GHANI; BRENDAN KITTS; BART GOETHALS; GEOFF MCLACHLAN; JIAN PEI; ASHOK SRIVASTAVA; OSMAR ZAÏANE

    2012-01-01

    We report on the panel discussion held at the ICDM'10 conference on the top 10 data mining case studies in order to provide a snapshot of where and how data mining techniques have made significant real-world impact. The tasks covered by 10 case studies range from the detection of anomalies such as cancer, fraud, and system failures to the optimization of organizational operations, and include the automated extraction of information from unstructured sources. From the 10 cases we find that sup...

  17. System study of alternative waste management techniques: Final report

    International Nuclear Information System (INIS)

    This report summarizes the important results achieved in conjunction with the Research and Development Priority ''Alternative Waste Management Techniques'' sponsored by the Federal Ministry of Research and Technology from 1981 to 1984. The subject of these studies was solely ''direct disposal'' of spent fuel elements. For this purpose a reference concept was selected from a variety of possible processes and engineered in detailed form by firms in the nuclear industry. Those who worked on the engineering concepts consider this waste management method technically feasible. Several disposal casks have been fabricated. The basic licensability of direct disposal can be evaluated on the basis of the documentation developed by the companies. The direct disposal method was compared with the ''integrated waste management concept'' using reference fuel cycles with respect to the following criteria: radiological safety and nuclear material safeguards and, in addition, economic and energy-policy aspects. It was found that with respect to radiological safety, including the long-term safety of the final repository, there are no significant differences between the two fuel cycles with and without reprocessing. With respect to the nuclear material safeguards of a final repository containing spent fuel elements, there are still a number of unanswered questions. From an economic standpoint, direct disposal will be more economical in the foreseeable future than integrated waste management. Quantification of the effects of one or the other waste management method on the national economy is not necessarily possible. Reprocessing is supported primarily by technological and energy-policy considerations. On the basis of the results, the conclusion is reached that reprocessing should be pursued further, but that at the same time direct disposal should be developed to the point of practical maturity

  18. Systematic study of double beta decay to excited final states

    International Nuclear Information System (INIS)

    A systematic study of two-neutrino double beta (2νββ) decay to the final ground state and excited states is performed within a microscopic quasiparticle random phase approximation (QRPA) model. The excited states are assumed to have the structure of one or two QRPA phonons. This study of the 2νββ decay rates is complemented with the study of single-beta-decay feeding of the relevant nuclei taking part in the double beta process. The Woods-Saxon single-particle energies have been corrected near the Fermi surface by comparing the BCS quasi-particle energies with spectroscopic data of the relevant odd-mass nuclei. Pairing gaps, energy systematics of the Gamow-Teller-States and the available beta-decay data have been used to obtain effective, model-space adapted, two-body matrix elements starting from the G-matrix elements of the Bonn one-boson-exchange potential. This enables a parameter-free calculation of the double Gamow-Teller matrix elements and theoretical prediction of double-beta half lives. The harmonic two-phonon approximation has been used in the beta-decay analysis and the subsequent 2νββ calculations. (authors)

  19. Predicting Students Drop Out: A Case Study

    Science.gov (United States)

    Dekker, Gerben W.; Pechenizkiy, Mykola; Vleeshouwers, Jan M.

    2009-01-01

    The monitoring and support of university freshmen is considered very important at many educational institutions. In this paper we describe the results of the educational data mining case study aimed at predicting the Electrical Engineering (EE) students drop out after the first semester of their studies or even before they enter the study program…

  20. Study of $\\pi^{-}$p Interactions with Neutral Final States

    CERN Multimedia

    2002-01-01

    This experiment is a study of the production of neutral particles or states decaying into photons in the reaction @p|- + p @A M|0 + n at SPS energies. \\\\ \\\\ Special attention is paid to the measurement of the production of heavy particles with hidden quantum numbers and of possible new heavy spinless states decaying into two photons. \\\\ \\\\ The large four-momentum transfer behaviour of binary processes involving known neutral mesons and the production of new meson resonances with high mass and spin will also be studied. Complex multiparticle final states will be analysed as a by-product.\\\\ \\\\ The central unit of the experimental set-up is a 4000 cell Cerenkov hodoscope spectrometer (GAMS) which allows the measurement of the momentum vector of each $\\gamma$ in a multigamma event. \\\\ \\\\ The longitudinal position of the interaction point in the liquid hydrogen target is measured by the Cerenkov light intensity. \\\\ \\\\ A guard system, made of scintillation counters and lead-glass Cerenkov counters, is used to trigg...

  1. Case Studies in Systems Chemistry. Final Report. [Includes Complete Case Study, Carboxylic Acid Equilibria

    Science.gov (United States)

    Fleck, George

    This publication was produced as a teaching tool for college chemistry. The book is a text for a computer-based unit on the chemistry of acid-base titrations, and is designed for use with FORTRAN or BASIC computer systems, and with a programmable electronic calculator, in a variety of educational settings. The text attempts to present computer…

  2. An Investigation of Strategic Decision Making in Service Marketing through Case Study Development and Analysis

    Science.gov (United States)

    Rosetti, Joseph L.; Maceiko, Meghan

    2009-01-01

    Through the collaborative efforts of an undergraduate student and a professor of marketing, this paper focuses on a case study and corresponding teaching notes developed as a final component of an independent study in service marketing. The case utilizes the hospitality industry as the template for analysis of the appropriateness of marketing…

  3. A Case Study: Problem-Based Learning for Civil Engineering Students in Transportation Courses

    Science.gov (United States)

    Ahern, A. A.

    2010-01-01

    This paper describes two case studies where problem-based learning (PBL) has been introduced to undergraduate civil engineering students in University College Dublin. PBL has recently been put in place in the penultimate and final year transport engineering classes in the civil engineering degree in University College Dublin. In this case study,…

  4. TGLF Recalibration for ITER Standard Case Parameters FY2015: Theory and Simulation Performance Target Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Candy, J. [General Atomics, San Diego, CA (United States)

    2015-12-01

    flows that fit the GYRO simulations, the parameters of the model had to be tuned to each case. A physics basis for the zonal flow model was lacking. Electron energy transport at short wavelength: A secondary issue – the high-k electron energy flux – was initially assumed to be independent of the zonal flow effect. However, detailed studies of the fluctuation spectra from recent multiscale (electron and ion scale) GYRO simulations provided a critical new insight into the role of zonal flows. The multiscale simulations suggested that advection by the zonal flows strongly suppressed electron-scale turbulence. Radial shear of the zonal ExB fluctuation could not compete with the large electron-scale linear growth rate, but the kx-mixing rate of the ExB advection could. This insight led to a preliminary new model for the way zonal flows saturate both electron and ion-scale turbulence. It was also discovered that the strength of the zonal ExB velocity could be computed from the linear growth rate spectrum. The new saturation model (SAT1), which replaces the original model (SAT0), was fit to the multiscale GYRO simulations as well as the ion-scale GYRO simulations used to calibrate the original SAT0 model. Thus, SAT1 captures the physics of both multiscale electron transport and zonal-flow stabilization. In future work, it the SAT1 model will require significant further testing and (expensive) calibration with nonlinear multiscale gyrokinetic simulations over a wider variety of plasma conditions – certainly more than the small set of scans about a single C-Mod L-mode discharge. We believe the SAT1 model holds great promise as a physics-based model of the multiscale turbulent transport in fusion devices. Correction to ITER performance predictions: Finally, the impact of the SAT1model on the ITER hybrid case is mixed. Without the electron-scale contribution to the fluxes, the Dimits shift makes a significant improvement in the predicted fusion power as originally

  5. Systems study 'Alternative Entsorgung'. Final report. Technical annex 1

    International Nuclear Information System (INIS)

    The technical development led to different final storage barrels, which satisfied the requirements during handling, during transport and in the final store. The planning bases of the final store for the final storage barrels with the requirements: - maximum transport weight 55 tonnes - maximum length 6.2 m together with other requirements, e.g. for the surface dose rate, lead to certain geometric dimensions. Other important characteristics of the final storage barrel are - the dry storage box for gastight enclosure of fuel elements - the actual final storage container, which protects against corrosion and load due to handling and rock pressure, and - the lost shielding, which makes direct handling possible. The dry storage box of the final storage barrel can accommodate a maximum of three complete fuel elements or the fuel rods of ten fuel elements. The engineering of both variants of packing the stored material was examined, where the container for fuel rods has clear advantages with regard to making use of the volume of the container. (orig./HP)

  6. Finalization of the feasibility study for Rocky Mountain arsenal

    International Nuclear Information System (INIS)

    The environmental remediation program at the Army's premier cleanup site, Rocky Mountain Arsenal, is fast approaching the climax of the study phase and will be moving into the cleanup phase. Selecting the cleanup approach for this extremely complex site involves addressing a number of precedent-setting issues. The Remedial Investigation (RI) for this 27-sq. mile former Army chemical munitions and commercial pesticide manufacturing facility, completed in January 1992, included the collection of over 50,000 samples from soil, surface water, groundwater, structures, air and plants and animals. Samples were analyzed for over 60 specific chemical analytes and screened for hundreds of others. The RI found a number of contaminated groundwater plumes, hundreds of contaminated structures, high concentrations of contaminants in soils in former disposal basins and manufacturing areas and buried munitions. Some of the major contaminants targeted for remediation include benzene, chloroform, tetrachloroethylene, dibromochloropropane, diisopropylmethyl phosphonate, aldrin, adieldrin, isodrin, chlordane, lead, arsenic and mercury. The Feasibility Study (FS) has reviewed potential remediation alternatives. The first phase of the FS, the Development and Screening of Alternatives (DSA) presented a range of alternatives. An equally complex and parallel study, the Integrated Endangerment Assessment, is in final stages. The goal of the second phase of the FS, the Detailed Analysis of Alternatives (DAA), is to analyze the soils, water and structures alternatives retained in the DSA in greater technical detail. The Army's draft version of the DAA, released in the Fall of 1993, has proposed a wide range of alternatives to remediate 27 different contamination groups and is included in the presentation

  7. Gigantic Suprapubic Lymphedema: A Case Study.

    Science.gov (United States)

    Tanhaeivash, Roozbeh; Franiel, Tobias; Grimm, Marc-Oliver; Horstmann, Marcus

    2016-08-01

    We present the first case study of idiopathic gigantic suprapubic lymphedema and buried penis treated with puboscrotal reconstruction in a patient with initial extreme obesity after an extensive weight reduction (120 kg). Massive localized lymphedema of the suprapubic region should be differentiated from the scrotal type. Severe lymphedema could not resolve on its own and weight reduction does not seem to be helpful in such cases. PMID:27574599

  8. Management by Values: A Case Study

    OpenAIRE

    Liu, Zhen

    2012-01-01

    The intention of this paper is to conclude the management approach by the case study of Chinese enterprise. There are a lot of management approaches in practice, one of the most influential and famous one is management by objective which is invented by the father of modern management discipline Peter F Drucker, he observed the case of American most successful enterprise such as GM and then concluded and created the relevant meaningful management tools, in effect, such valuable manage...

  9. Final technical report on studies of plasma transport

    International Nuclear Information System (INIS)

    This document gives an overview of the scientific results obtained under the DOE grant, and references the journal articles which give more complete descriptions of the various topics. Recently, the research has been focused on 2-dimensional vortices and turbulence: experiments using a new camera-diagnosed electron plasma apparatus have given surprising results which both clarify and challenge theories. Here, the crossfield E x B flow of the electron plasma is directly analogous to the 2-d flow of an ideal fluid such as water, and may also give insight into more complicated poloidal flows exhibited in toroidal plasmas. The shear-flow instabilities, turbulence, and vortices can be accurately observed, and the free relaxation of this turbulence has been characterized. The physical processes underlying the complicated turbulent evolution can also be studied in more controlled near-linear regimes. The original experimental focus of this program was on radial particle transport from applied external field asymmetries. Here, this research program clearly identified the importance of the collective response of the plasma, giving smaller fields from shielding, or enhanced fields from resonant modes. Experiments and theory work have also elucidated the flow of a plasma along the magnetic field. Finally, some theory was pursued for direct application to fusion plasmas, and to gravitating gas clouds in astrophysics. This program was highly successful in clarifying basic plasma transport processes

  10. Study of Final States in Deep Inelastic Muon Scattering

    CERN Multimedia

    2002-01-01

    The aim of this experiment is to study the different possible final states in deep inelastic muon scattering from hydrogen in connection with the detection of the scattered muon in a forward spectrometer (Experiment NA2).\\\\ \\\\ A vertex detector will be used which extends the hadron detection capabilities into the backward hemisphere of the centre-of-mass system. Particle momenta can be measured down to 200 MeV/c in a vertex magnet, which contains a streamer chamber (SC Particle identification will be done in a series of wide angle Cerenkov counters (C^0,C^1,CA) and at low momenta in time-of-flight counter hodoscopes (F1-F4). An 8-plane module of MWPC chambers (PV) will be used in conjunction with the streamer chamber and the drift chambers WV1, WV2 and WV3. \\\\ \\\\ The vertex magnet is a C magnet with circular pole tips of 2 m diameter and 1 m gap width. The central magnetic field will be 1.5 T. The streamer chamber (2m x 1.2m x 0.72m) will contain a 1 m liquid H^2 target.\\\\ \\\\ As a natural extension of the for...

  11. Clean Cities Case Study: Barwood Cab Fleet Study Summary

    International Nuclear Information System (INIS)

    Barwood Cab Fleet Study Summary is the second in a new series called''Alternative Fuel Information Case Studies,'' designed to present real-world experiences with alternative fuels to fleet managers and other industry stakeholders

  12. Social Studies Project Evaluation: Case Study and Recommendations.

    Science.gov (United States)

    Napier, John

    1982-01-01

    Describes the development and application of a model for social studies program evaluations. A case study showing how the model's three-step process was used to evaluate the Improving Citizenship Education Project in Fulton County, Georgia is included. (AM)

  13. An Analisys of Business VPN Case Studies

    OpenAIRE

    Crescenzio Gallo; Michele Perilli; Michelangelo De Bonis

    2009-01-01

    A VPN (Virtual Private Network) simulates a secure private network through a shared public insecure infrastructure like the Internet. The VPN protocol provides a secure and reliable access from home/office on any networking technology transporting IP packets. In this article we study the standards for VPN implementation and analyze two case studies regarding a VPN between two routers and two firewalls.

  14. Collaborative Assessment: Middle School Case Study

    Science.gov (United States)

    Parkison, Paul T.

    2014-01-01

    Utilizing a participant observer research model, a case study of the efficacy of a collaborative assessment methodology within a middle school social studies class was conducted. A review of existing research revealed that students' perceptions of assessment, evaluation, and accountability influence their intrinsic motivation to learn. A…

  15. Measuring marketing performance - A case study

    OpenAIRE

    Laakso, Vesa-Pekka

    2011-01-01

    PURPOSE OF THE STUDY The purpose of this study is to develop a marketing dashboard for a Finnish company that operates in the financial industry. The identification of suitable metrics for assessing marketing performance is considered central. This study proposes a new construct (a dashboard) that aims to providing management relevant information on marketing performance from decision-making perspective. METHODOLOGY AND DATA The methodology is a constructive case study. In the...

  16. Studying Tourism Indicators In Iran (Case Study: Khoramabad City

    Directory of Open Access Journals (Sweden)

    Mahdi Garavand

    2014-12-01

    Full Text Available Now tourism industry is one of the greatest World Industries from point of view development and with attention to be use financial sources and involved persons with that. This industry, has third rank in financial and commercial classifications and including more than 7 percent of whole world exports, also it influence gross national product in all countries; so that increase rate of gross national product 2billion $ in all world nations. Tourism industry important to stress tow important ways: first, the dynamic familiarity with other cultures, nations, races, tribes, dialects and …; second, it provides sources of income and foreign exchanges from an economic point of view. The different world countries fallowed attraction of tourists because of that they have various facilities and various attractions.Iran is ranked as one of the 10 top attractive countries in the world but Iran was place 114th ranking of the countries in terms of attracting tourists (World Economic Forum, 2011, tourism receipts is ranked as 77th, and the number of international tourists arrivals ranked as place 70th (UNWTO, 2009.So, the aim of this research is, studying main indicators in tourism location in order to improving their qualify. This research is qualitative. Also was used the "Descriptive/ Explanatory" through contain analysis. The research method are phenomenological, conceptual and constructive theory in field of tourism industry in context of Iran, Which eventually is bound to lead to the development of tourism industry in Iran. The strategy of this research is qualitative method by using case study in the area of tourism industry in fabric of Iran. So, was introduced touristic-historical building. Then according to visitor comments was ranked. At finally was used T-Test method in order to analyzing hypothesis.

  17. Clinical observed performance evaluation: a prospective study in final year students of surgery.

    LENUS (Irish Health Repository)

    Markey, G C

    2010-06-24

    We report a prospective study of clinical observed performance evaluation (COPE) for 197 medical students in the pre-qualification year of clinical education. Psychometric quality was the main endpoint. Students were assessed in groups of 5 in 40-min patient encounters, with each student the focus of evaluation for 8 min. Each student had a series of assessments in a 25-week teaching programme. Over time, several clinicians from a pool of 16 surgical consultants and registrars evaluated each student by direct observation. A structured rating form was used for assessment data. Variance component analysis (VCA), internal consistency and inter-rater agreement were used to estimate reliability. The predictive and convergent validity of COPE in relation to summative OSCE, long case, and overall final examination was estimated. Median number of COPE assessments per student was 7. Generalisability of a mean score over 7 COPE assessments was 0.66, equal to that of an 8 x 7.5 min station final OSCE. Internal consistency was 0.88-0.97 and inter-rater agreement 0.82. Significant correlations were observed with OSCE performance (R = 0.55 disattenuated) and long case (R = 0.47 disattenuated). Convergent validity was 0.81 by VCA. Overall final examination performance was linearly related to mean COPE score with standard error 3.7%. COPE permitted efficient serial assessment of a large cohort of final year students in a real world setting. Its psychometric quality compared well with conventional assessments and with other direct observation instruments as reported in the literature. Effect on learning, and translation to clinical care, are directions for future research.

  18. Study of B Meson Decays to ppbarh Final States

    Energy Technology Data Exchange (ETDEWEB)

    Hryn' ova, Tetiana B.; /SLAC

    2006-03-22

    B mesons are unique among well-established non-quarkonium mesons in their ability to decay into baryons. Baryonic B decays offer a wide range of interesting areas of study: they can be used to test our theoretical understanding of rare decay processes involving baryons, search for direct CP violation and study low-energy QCD. This thesis presents measurements of branching fractions and a study of the decay dynamics of the charmless three-body decays of B meson into p{bar p}h final states, where h = {pi}{sup +}, K{sup +}, K{sub S}{sup 0}, K*{sup 0} or K*{sup +}. With a sample of 232 million {Upsilon}(4S) {yields} B{bar B} events collected with the BaBar detector, we report the first observation of the B {yields} p{bar p}K*{sup 0} decay, and provide improved measurements of branching fractions of the other modes. The distribution of the three final-state particles is of particular interest since it provides dynamical information on the possible presence of exotic intermediate states such as the hypothetical pentaquark states {Theta}*{sup ++} and {Theta}{sup +}in the m{sub pK{sup +}} and m{sub pK{sub S}{sup 0}} spectra, respectively, or glueball states (such as the tensor glueball f{sub J}(2220)) in the m{sub p{bar p}} spectrum. No evidence for exotic states is found and upper limits on the branching fractions are set. An enhancement at low p{bar p} mass is observed in all the B {yields} p{bar p}h modes, and its shape is compared between the decay modes and with the shape of the time-like proton form factor. A Dalitz plot asymmetry in B {yields} p{bar p}K{sup +} mode suggests dominance of the penguin amplitude in this decay and disfavors the possibility that the low mass p{bar p} enhancement originates from the presence of a resonance below threshold (such as the recently seen baryonium candidate at 1835 MeV/c{sup 2}). We also identify decays of the type B {yields} X{sub c{bar c}}h {yields} p{bar p}h, where h = K{sup +}, K{sub S}{sup 0}, K*{sup 0} or K*{sup +}, and X

  19. Mining Product Data Models: A Case Study

    Directory of Open Access Journals (Sweden)

    Cristina-Claudia DOLEAN

    2014-01-01

    Full Text Available This paper presents two case studies used to prove the validity of some data-flow mining algorithms. We proposed the data-flow mining algorithms because most part of mining algorithms focuses on the control-flow perspective. First case study uses event logs generated by an ERP system (Navision after we set several trackers on the data elements needed in the process analyzed; while the second case study uses the event logs generated by YAWL system. We offered a general solution of data-flow model extraction from different data sources. In order to apply the data-flow mining algorithms the event logs must comply a certain format (using InputOutput extension. But to respect this format, a set of conversion tools is needed. We depicted the conversion tools used and how we got the data-flow models. Moreover, the data-flow model is compared to the control-flow model.

  20. Cryostat design case studies, principles and engineering

    CERN Document Server

    2016-01-01

    This book enables the reader to learn the fundamental and applied aspects of practical cryostat design by examining previous design choices and resulting cryostat performance. Through a series of extended case studies the book presents an overview of existing cryostat design covering a wide range of cryostat types and applications, including the magnet cryostats that comprise the majority of the Large Hadron Collider at CERN, space-borne cryostats containing sensors operating below 1 K, and large cryogenic liquid storage vessels. It starts with an introductory section on the principles of cryostat design including practical data and equations. This section is followed by a series of case studies on existing cryostats, describing the specific requirements of the cryostat, the challenges involved and the design choices made along with the resulting performance of the cryostat. The cryostat examples used in the studies are chosen to cover a broad range of cryostat applications and the authors of each case are ...

  1. The bussola study. Final results, conclusions and proposals

    Directory of Open Access Journals (Sweden)

    Antonio Luiz da Silva Brasileiro

    2000-09-01

    Full Text Available OBJECTIVE: To evaluate the use of thrombolytic and acetylsalicylic acid therapies in acute myocardial infarct patients as well as the availability of technical and human resources for the care of these patients in the emergency units of the city of Rio de Janeiro. Additional objectives were the evaluation of the use of primary angioplasty and the level of acceptance of SBC /RJ as an entity responsible for programs of continued medical education. METHODS: Interviews with physicians at 46 emergency units in the city of Rio de Janeiro. RESULTS: Of the 46 emergency units inspected, a policy of encouragement to use thrombolytic therapy was only prescribed in 6.5%. In 1/3 of the public wards no thrombolytic agents were available, and in none of them was access to primary angioplasty regularly available; 45.9% did not offer the minimal conditions required for the handling of cases of acute myocardial infarction; 60% of the physicians on-call (at both public and private emergency units, appeared not to know the importance of the use of acetylsalicylic acid in acute myocardial infarct patients; all physicians interviewed would participate in programs of continued medical education organized by the SBC/RJ. CONCLUSION: The study suggests there was: 1 the low probability of the use of thrombolytic therapy in the majority of the emergency units in of the city of Rio de Janeiro due to the inadequate policy of waiting for the transfer of the patient to coronary or intensive care unit; 2 a low awareness to the importance of early use of acetylsalic acid in acute myocardial infarct; 3 half of the emergency units of the public net do not have the minimal conditions required for the handling of cases of acute myocardial infarction; 4 a high level of credibility exists that would enable the SBC/RJ to set up programs for continued medical education to change the mentality regarding the use of thrombolytic therapy and of acetylsalicylic acid.

  2. ''Key'' sectors in final energy consumption: an input-output application to the Spanish case

    Energy Technology Data Exchange (ETDEWEB)

    Alcantara, V.; Padilla, E. [Universitat Autonoma de Barcelona, Bellaterra (Spain). Dept. d' Economia Aplicada

    2003-12-01

    In this paper we analyze the determination of ''key'' sectors in the final energy consumption. We approach this issue from an input-output perspective and we design a methodology based on the elasticities of the demands of final energy consumption. As an exercise, we apply the proposed methodology to the Spanish economy. The analysis allows us to indicate the greater or lesser relevance of the different sectors in the consumption of final energy, pointing out which sectors deserve greater,attention in the Spanish case and showing the implications for energy policy. (author)

  3. 'Key' sectors in final energy consumption: an input-output application to the Spanish case

    Energy Technology Data Exchange (ETDEWEB)

    Alcantara, Vicent E-mail: vicent.alcantara@uab.es; Padilla, Emilio E-mail: emilio.padilla@uab.es

    2003-12-01

    In this paper we analyze the determination of 'key' sectors in the final energy consumption. We approach this issue from an input-output perspective and we design a methodology based on the elasticities of the demands of final energy consumption. As an exercise, we apply the proposed methodology to the Spanish economy. The analysis allows us to indicate the greater or lesser relevance of the different sectors in the consumption of final energy, pointing out which sectors deserve greater attention in the Spanish case and showing the implications for energy policy.

  4. Repurposing legacy data innovative case studies

    CERN Document Server

    Berman, Jules J

    2015-01-01

    Repurposing Legacy Data: Innovative Case Studies takes a look at how data scientists have re-purposed legacy data, whether their own, or legacy data that has been donated to the public domain. Most of the data stored worldwide is legacy data-data created some time in the past, for a particular purpose, and left in obsolete formats. As with keepsakes in an attic, we retain this information thinking it may have value in the future, though we have no current use for it. The case studies in this book, from such diverse fields as cosmology, quantum physics, high-energy physics, microbiology,

  5. Case study in time series analysis

    CERN Document Server

    Zhongjie, Xie

    1993-01-01

    This book is a monograph on case studies using time series analysis, which includes the main research works applied to practical projects by the author in the past 15 years. The works cover different problems in broad fields, such as: engineering, labour protection, astronomy, physiology, endocrinology, oil development, etc. The first part of this book introduces some basic knowledge of time series analysis which is necessary for the reader to understand the methods and the theory used in the procedure for solving problems. The second part is the main part of this book - case studies in differ

  6. Pulsed Neutron Scattering Studies of Strongly Fluctuating solids, Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Collin Broholm

    2006-06-22

    The conventional description of a solid is based on a static atomic structure with small amplitude so-called harmonic fluctuations about it. This is a final technical report for a project that has explored materials where fluctuations are sufficiently strong to severely challenge this approach and lead to unexpected and potentially useful materials properties. Fluctuations are enhanced when a large number of configurations share the same energy. We used pulsed spallation source neutron scattering to obtain detailed microscopic information about structure and fluctuations in such materials. The results enhance our understanding of strongly fluctuating solids and their potential for technical applications. Because new materials require new experimental techniques, the project has also developed new techniques for probing strongly fluctuating solids. Examples of material that were studied are ZrW2O8 with large amplitude molecular motion that leads to negative thermal expansion, NiGa2S4 where competing interactions lead to an anomalous short range ordered magnet, Pr1- xBixRu2O7 where a partially filled electron shell (Pr) in a weakly disordered environment produces anomalous metallic properties, and TbMnO3 where competing interactions lead to a magneto-electric phase. The experiments on TbMnO3 exemplify the relationship between research funded by this project and future applications. Magneto-electric materials may produce a magnetic field when an electric field is applied or vise versa. Our experiments have clarified the reason why electric and magnetic polarization is coupled in TbMnO3. While this knowledge does not render TbMnO3 useful for applications it will focus the search for a practical room temperature magneto-electric for applications.

  7. Corporate Social Responsibility : A Case Study

    OpenAIRE

    Björkqvist, Kira

    2012-01-01

    The importance of taking responsibility for the common environmental and social welfare has become of essence in the business world of the 21st century. This thesis provides the reader with knowledge on corporate social responsibility (CSR) and shows the reader a comparative study on how CSR is reported on in three case study companies chosen for this thesis. This thesis is a descriptive study that uses the research method of content analysis to determine the commonalities and differences...

  8. Study supporting the phasing out of environmentally harmful subsidies. Annexes to Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Withana, S.; Ten Brink, P.; Franckx, L.; Hirschnitz-Garbers, M.; Mayeres, I.; Oosterhuis, F.; Porsch, L.

    2012-10-15

    The need to reform ineffective or harmful public subsidies has long been recognised and has been a contentious point of discussion for several years. The EU has a long-standing commitment to removing or phasing out environmentally harmful subsidies (EHS). Most recently, the need to phase out EHS is reiterated in the 'Roadmap for a resource efficient Europe' which includes a milestone that 'by 2020 EHS will be phased out, with due regard to the impact on people in need'. Despite several commitments, progress has been slow and subsidies remain an issue in most EU countries. This study focuses specifically on EHS at the level of EU Member States; it identifies key types of EHS and examines cases of existing EHS across a range of environmental sectors and issues, including subsidies from non-action. The study also analyses examples of good practices in the reform of EHS in EU Member States and the lessons that can be learnt from these cases. Finally, based on this analysis, it develops practical recommendations on phasing out and reforming EHS to support the objectives of the Europe 2020 Strategy and the resource efficiency agenda. The study was carried out between January and October 2012 and is based on an analysis of literature and consultation with experts and policy makers. The sectoral cases studied are listed and discussed in this annex report: agriculture, climate and energy, fisheries, food, forestry, materials, transport, waste, and water.

  9. Improvability of assembly systems II: Improvability indicators and case study

    Directory of Open Access Journals (Sweden)

    S.-Y. Chiang

    2000-01-01

    Full Text Available Based on the performance analysis technique developed in Part I, this paper presents improvability indicators for assembly lines with unreliable machines. In particular, it shows that assembly lines are unimprovable with respect to workforce re-distribution if each buffer is, on the average, close to being half full. These lines are unimprovable with respect to buffer capacity re-distribution if each machine is starved and blocked with almost equal frequency. In addition, the paper provides indicators for identification of bottleneck machines and bottleneck buffers. Finally, the paper reports on an application of these improvability indicators in a case study at an automotive components plant.

  10. OCAD University's Imagination Catalyst: a Case Study.

    OpenAIRE

    Reichenbacher, Helmut

    2015-01-01

    In order to provide the context for an incubator case study, this paper provides a brief overview of the support mechanisms for Canadian university-based innovation and commercialization, especially regarding government (federal, provincial, municipal). It then proceeds to describe OCAD University’s specialized commercialization and incubator unit, the Imagination Catalyst, which supports talent

  11. Learning Machine Learning: A Case Study

    Science.gov (United States)

    Lavesson, N.

    2010-01-01

    This correspondence reports on a case study conducted in the Master's-level Machine Learning (ML) course at Blekinge Institute of Technology, Sweden. The students participated in a self-assessment test and a diagnostic test of prerequisite subjects, and their results on these tests are correlated with their achievement of the course's learning…

  12. LCA – Unique and Controversial Case Studies

    Science.gov (United States)

    This session will focus on case studies and applications that have a unique or controversial aspect. Some of the most recent topics that seem to have significant interest include: LCA-based product declarations, LCA-based standards, LCA-based labels, alternative energy, agricul...

  13. A Case Study from South Africa.

    Science.gov (United States)

    Casazza, Martha

    2000-01-01

    Presents the case study success story of a University of Port Elizabeth Advancement Program student named Elroy Africander. Underscores two significant components of student transition programs: the need for support for students' personal and emotional growth, and that practitioners should regularly assess the strengths and weaknesses of programs…

  14. WMOST v2 Case Study: Monponsett Ponds

    Science.gov (United States)

    This webinar presents an overview of the preliminary results of a case study application of EPA's Watershed Management Optimization Support Tool v2 (WMOST) for stakeholders in the Monponsett Ponds Watershed Workgroup. Monponsett Ponds is a large water system consisting of two ba...

  15. Case Studies on Globalization and Money Laundering

    OpenAIRE

    Eckhard Freyer

    2008-01-01

    Financial globalization has greatly improved the efficiency of capital transfers around the world, with the cost of facilitating criminal money laundering activities. Based on case studies on conditions for money laundering in the process of globalization and transformation in Europe, are discussed the challenges that a “global financial village” must confront.

  16. Physical Science Connected Classrooms: Case Studies

    Science.gov (United States)

    Irving, Karen; Sanalan, Vehbi; Shirley, Melissa

    2009-01-01

    Case-study descriptions of secondary and middle school classrooms in diverse contexts provide examples of how teachers implement connected classroom technology to facilitate formative assessment in science instruction. Connected classroom technology refers to a networked system of handheld devices designed for classroom use. Teachers were…

  17. The Verbal Noncommunicator: A Case Study.

    Science.gov (United States)

    Fujiki, Martin; Brinton, Bonnie

    1991-01-01

    This article presents a case study of a nine-year-old male with language impairment and specific pragmatic disabilities. His interactions with an adult, a language age-matched peer, and a chronological age-matched peer were observed and analyzed to determine conversational responsiveness and assertiveness. Findings support Fey's (1986) verbal…

  18. Acoustical case studies of three green buildings

    Science.gov (United States)

    Siebein, Gary; Lilkendey, Robert; Skorski, Stephen

    2005-04-01

    Case studies of 3 green buildings with LEED certifications that required extensive acoustical retrofit work to become satisfactory work environments for their intended user groups will be used to define areas where green building design concepts and acoustical design concepts require reconciliation. Case study 1 is an office and conference center for a city environmental education agency. Large open spaces intended to collect daylight through clerestory windows provided large, reverberant volumes with few acoustic finishes that rendered them unsuitable as open office space and a conference room/auditorium. Case Study 2 describes one of the first gold LEED buildings in the southeast whose primary design concepts were so narrowly focused on thermal and lighting issues that they often worked directly against basic acoustical requirements resulting in sound levels of NC 50-55 in classrooms and faculty offices, crosstalk between classrooms and poor room acoustics. Case study 3 is an environmental education and conference center with open public areas, very high ceilings, and all reflective surfaces made from wood and other environmentally friendly materials that result in excessive loudness when the building is used by the numbers of people which it was intended to serve.

  19. Case Studies: Windows onto Clinical Supervision.

    Science.gov (United States)

    Nolan, Jim; And Others

    1993-01-01

    By examining the structures and activities common to six case studies of clinical teacher supervision, this article identifies five conditions that facilitate changes in teacher thinking and behavior: development of a supportive, collegial relationship; teacher control over supervision products; continuity over time; focused, descriptive records…

  20. Firefighter Workplace Learning: An Exploratory Case Study

    Science.gov (United States)

    Tracey, Edward A.

    2014-01-01

    Despite there being a significant amount of research investigating workplace learning, research exploring firefighter workplace learning is almost nonexistent. The purpose of this qualitative multi-case study was to explore how firefighters conceptualize, report, and practice workplace learning. The researcher also investigated how firefighters…

  1. Performance Support Case Studies from IBM.

    Science.gov (United States)

    Duke-Moran, Celia; Swope, Ginger; Morariu, Janis; deKam, Peter

    1999-01-01

    Presents two case studies that show how IBM addressed performance support solutions and electronic learning. The first developed a performance support and expert coaching solution; the second applied performance support to reducing implementation time and total cost of ownership of enterprise resource planning systems. (Author/LRW)

  2. Climate wise case study compendium: Report 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-02-01

    This case study compendium is one of several Climate Wise tools available to help interested companies identify cost-effective options. Climate Wise, a private-public partnership program, is a key Federal initiative to return greenhouse gas emissions to 1990 levels by 2000.

  3. Teaching the Holocaust through Case Study

    Science.gov (United States)

    Misco, Thomas

    2009-01-01

    This article responds to the curricular challenges teachers face with Holocaust education, including cursory treatments and a lack of focus on individual experiences. First, the author argues for a case-study approach to help students reengage concrete and complex features of the Holocaust as a point of departure for subsequent inquiry. In…

  4. Library Virtual Tours: A Case Study

    Science.gov (United States)

    Ashmore, Beth; Grogg, Jill E.

    2004-01-01

    Virtual tours delivered via the Web have become a common tool for both instruction and outreach. This article is a case study of the creation of a virtual tour for a university library and is intended to provide others interested in creating a virtual tour of their library the opportunity to learn from the mistakes and successes of fellow…

  5. It's Not Funny: A Case Study

    Science.gov (United States)

    Méndez-Morse, Sylvia

    2015-01-01

    This case study may be used with personnel supervision, school law, and other school leadership courses. It describes the behavior and actions of one teacher toward another. Student discussions can focus on supervision, workplace mobbing, workplace bullying, as well as sexual harassment. Students should focus on a school leader's role in such…

  6. Comparative Environmental Threat Analysis: Three Case Studies.

    Science.gov (United States)

    Latour, J. B.; Reiling, R.

    1994-01-01

    Reviews how carrying capacity for different environmental problems is operationalized. Discusses whether it is possible to compare threats, using the exceeding of carrying capacity as a yardstick. Points out problems in comparative threat analysis using three case studies: threats to European groundwater resources, threats to ecosystems in Europe,…

  7. Acquaintance Rape: A Case Study Approach.

    Science.gov (United States)

    Marinelli, Rosalie D.

    1994-01-01

    Describes a case study approach to acquaintance rape used in a Personal Health and Lifestyles course at the University of Nevada in Reno that allows students to discuss the characters in a scenario, an instructional process seen as less threatening than describing personal experiences. (MDM)

  8. Suitability of the Kannonkoski municipality for final disposal of spent fuel. Preliminary study

    International Nuclear Information System (INIS)

    Teollisuuden Voima Oy (TVO) studies the Finnish bedrock for the final disposal of the spent nuclear fuel from the Olkiluoto NPP. Detailed site investigations have since 1993 been concentrated on three areas, the Olkiluoto area i Eurajoki, Romuvaara in Kuhmo and Kivetty in Aeaenekoski. The Kivetty investigation area is situated on a large bedrock block that extends to the area of Aeaenekoski's western neighbour municipality, Kannonkoski. In 1993 the municipality of Kannonkoski and TVO agreed that TVO also studies the feasibility of siting the repository in Kannonkoski. In this pre-study consideration is given to both geologic and other prerequisite of siting the disposal facility, such as transport arrangements and infrastructure. The report also includes an estimate of the economic impact on Kannonkoski in case its area is chosen for the site of the disposal facility. (34 refs., 23 figs., 2 tabs.)

  9. Case studies on selected natural food antioxidants

    OpenAIRE

    Herrero, Miguel; Mendiola, J. A.; Cifuentes, Alejandro; Ibáñez, Elena

    2013-01-01

    In this chapter, a broad description of several case studies related to common antioxidants found in food-related products is presented. In this regard, special attention is put on the novel advanced environmentally-friendly extraction methods nowadays employed to extract and purify those potent antioxidants from natural matrices. A brief description of these extraction processes is provided together with some of the instrumentation needed. Besides, the studies carried out so f...

  10. MARKET INTEGRATION: CASE STUDIES OF STRUCTURAL CHANGE

    OpenAIRE

    Franken, Jason R.V.; Parcell, Joseph L.

    2003-01-01

    The grain/oilseed industry is undergoing considerable structural change in the form of mergers and the addition of new processing facilities to add value beyond commodity grade. The rapid structural changes in this industry call into question the relevance of previous research conducted in these areas. Focusing on two structural change events in northeast Missouri as case studies provides an incisive glimpse at the larger impact of structural change on the grain/oilseed industry. This study a...

  11. Empathy Development Through Case Study and Simulation.

    Science.gov (United States)

    Mennenga, Heidi A; Bassett, Susan; Pasquariello, Libby

    2016-01-01

    Because empathy is integral to the nurse-patient relationship, nurse educators are challenged to explore teaching strategies that may aid in the development of empathy among students. The purpose of this study was to determine whether consistent exposure to a single patient through case study and simulation had an impact on empathy levels in senior-level baccalaureate nursing students. Results provide interesting conclusions for faculty members and offer a basis for ongoing discussion. PMID:26448156

  12. Success against the odds: A case study

    OpenAIRE

    Ahmadbayli, Aydan

    2015-01-01

    The purpose of this dissertation is to examine the leadership behaviours and practices necessary for school ‘turnaround’. The research was conducted by taking a multi perspective approach within a qualitative research study to explore the case of a UK based school facing ‘special measures’ and in disadvantaged circumstances. Research methods employed include a documentary study and semi-structured interviews with six members of staff. The results indicated that effective turnaround leaders em...

  13. Can We Generalize from Case Studies?

    OpenAIRE

    Paul F. Steinberg

    2015-01-01

    This article considers the role of generalization in comparative case studies, using as exemplars the contributions to this special issue on climate change politics. As a research practice, generalization is a logical argument for extending one’s claims beyond the data, positing a connection between events that were studied and those that were not. No methodological tradition is exempt from the requirement to demonstrate a compelling logic of generalization. The article presents a taxonomy of...

  14. Mobile Technologies Adoption: An Exploratory Case Study

    Institute of Scientific and Technical Information of China (English)

    CHU Yan; HUANG Lihua

    2008-01-01

    Based on the theory of task-technology fit and literature review of mobile technology acceptance, a research model is presented based on the features of mobile technologies and the actual usage of mobile applications in business environments, which identifies the characteristics of mobile applications and fitting tasks. An exploratory case is studied to understand how ABC Company, Hong Kong, utilizes mobile selling applications in their sales management process. This study gives some managerial suggestions for enterprises to successfully use mobile applications.

  15. Blade System Design Study. Part II, final project report (GEC).

    Energy Technology Data Exchange (ETDEWEB)

    Griffin, Dayton A. (DNV Global Energy Concepts Inc., Seattle, WA)

    2009-05-01

    As part of the U.S. Department of Energy's Low Wind Speed Turbine program, Global Energy Concepts LLC (GEC)1 has studied alternative composite materials for wind turbine blades in the multi-megawatt size range. This work in one of the Blade System Design Studies (BSDS) funded through Sandia National Laboratories. The BSDS program was conducted in two phases. In the Part I BSDS, GEC assessed candidate innovations in composite materials, manufacturing processes, and structural configurations. GEC also made recommendations for testing composite coupons, details, assemblies, and blade substructures to be carried out in the Part II study (BSDS-II). The BSDS-II contract period began in May 2003, and testing was initiated in June 2004. The current report summarizes the results from the BSDS-II test program. Composite materials evaluated include carbon fiber in both pre-impregnated and vacuum-assisted resin transfer molding (VARTM) forms. Initial thin-coupon static testing included a wide range of parameters, including variation in manufacturer, fiber tow size, fabric architecture, and resin type. A smaller set of these materials and process types was also evaluated in thin-coupon fatigue testing, and in ply-drop and ply-transition panels. The majority of materials used epoxy resin, with vinyl ester (VE) resin also used for selected cases. Late in the project, testing of unidirectional fiberglass was added to provide an updated baseline against which to evaluate the carbon material performance. Numerous unidirectional carbon fabrics were considered for evaluation with VARTM infusion. All but one fabric style considered suffered either from poor infusibility or waviness of fibers combined with poor compaction. The exception was a triaxial carbon-fiberglass fabric produced by SAERTEX. This fabric became the primary choice for infused articles throughout the test program. The generally positive results obtained in this program for the SAERTEX material have led to its

  16. FINAL REPORT ON THE AQUATIC MERCURY ASSESSMENT STUDY

    Energy Technology Data Exchange (ETDEWEB)

    Halverson, N

    2008-09-30

    In February 2000, the United States Environmental Protection Agency (EPA) Region 4 issued a proposed Total Maximum Daily Load (TMDL) for total mercury in the middle and lower Savannah River. The initial TMDL, which would have imposed a 1 ng/l mercury limit for discharges to the middle/lower Savannah River, was revised to 2.8 ng/l in the final TMDL released in February 2001. The TMDL was intended to protect people from the consumption of contaminated fish, which is the major route of mercury exposure to humans. The most bioaccumulative form of mercury is methylmercury, which is produced in aquatic environments by the action of microorganisms on inorganic mercury. Because of the environmental and economic significance of the mercury discharge limits that would have been imposed by the TMDL, the Savannah River Site (SRS) initiated several studies concerning: (1) mercury in SRS discharges, SRS streams and the Savannah River, (2) mercury bioaccumulation factors for Savannah River fish, (3) the use of clams to monitor the influence of mercury from tributary streams on biota in the Savannah River, and (4) mercury in rainwater falling on the SRS. The results of these studies are presented in detail in this report. The first study documented the occurrence, distribution and variation of total and methylmercury at SRS industrial outfalls, principal SRS streams and the Savannah River where it forms the border with the SRS. All of the analyses were performed using the EPA Method 1630/31 ultra low-level and contaminant-free techniques for measuring total and methylmercury. Total mercury at National Pollutant Discharge Elimination System (NPDES) outfalls ranged from 0.31-604 ng/l with a mean of 8.71 ng/l. Mercury-contaminated groundwater was the source for outfalls with significantly elevated mercury concentrations. Total mercury in SRS streams ranged from 0.95-15.7 ng/l. Mean total mercury levels in the streams varied from 2.39 ng/l in Pen Branch to 5.26 ng/l in Tims Branch

  17. Chloride Channel Myotonia: Study of Five Cases

    Directory of Open Access Journals (Sweden)

    M Ghofrani

    2002-09-01

    Full Text Available Chloride channel Myotonia is a form of channelopathy, and Myotonia is its manifestation. Myotonia may be defined as delayed relaxation of skeletal muscle after its contraction. Decreased chloride conductance across the transverse tubular system, renders the muscle membrane hyper-excitable and leads to repetitive firing, creating Myotonia. Myotonia congenital is another name for chloride channel Myotonia. Myotonia congenital appears in autosomal dominant type called Thomson disease, autosomal recessive type called Becker disease, and a type with sporadic occurrence. Symptoms appear in the first or second decade of life. Repeated muscle contraction, the so called warm up, result in resolution of the Myotonia stiffness. Muscle stiffness and hypertrophy is another finding at physical examination. In this study we report on 5 patients, which had clinical and electrical signs of Myotonia. Muscle hypertrophy and warm up phenomena were present in all cases. CPK measurement of all cases were normal. 2 patients underwent muscle biopsy that showed only atrophy and increased central nuclei. In three cases autosomal recessive inheritance (Becker, in one case autosomal dominant inheritance (Thomsen and in one case sporadic occurrence was suggested. With respect to successful results of carbamazepine therapy in 4 patients, and being excellent in one of them, we suggest carbamazepine for the first choice of Myotonia treatment.

  18. New atomic beam studies at low energies. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Neynaber, R.H.; Rutherford, J.A.; Vroom, D.A.

    1975-10-08

    Final cross sections have been obtained for charge transfer between the ions O/sup +/ and N/sup +/ and the neutral atoms uranium and thorium. In the course of these measurements, cross sections were also obtained for some of the other charge transfer reactions. A second task completed was the measurement of cross sections for the reaction of Al/sup +/ with molecular nitrogen and oxygen. Attempts were made to measure cross sections for other processes involving these reactants, but no measurable signals could be detected. A final set of experiments involved a search for a route for formation of H/sub 3/O/sup +/ using NO/sup +/ as a precursor. No conclusive evidence for such a process could be found in the energy range covered by the experiments. (GRA)

  19. Using case studies in management education: the student perspective.

    OpenAIRE

    BRENNAN, ROSS; Ahmad, S. Jaseem

    2005-01-01

    Case studies are widely used in management education. Most of the literature discussing the case study method has reflected the perspective of the teacher, implying a teacher-centred view of the case study as a learning strategy. Little is known about the student perspective on case studies. If we are to use the case study method as a component of a student-centred learning experience, then we must know how students perceive case studies, and understand the differences in attitude...

  20. Vitiligo: A study of 120 cases

    Directory of Open Access Journals (Sweden)

    Kar P

    2001-11-01

    Full Text Available Vitiligo is a common pignientary disorder and of major social and cosmetic concern in India. Purpose of the study was to find out age at onset and sex incidence in vitiligo, role of hereditary factors and associations with other diseases. 120 self reporting vitiligo patients attending out patient department of a service hospital were selected for the study and this data was analysed. In the present series out of 120 cases 62 (51.6% were males and 58(48.35%were females. There was practically no difference in sex incidence. The lowest age of onset was two years and the oldest was 65 years. In the majority of patients,52(43.2%, disease started before twenty years of age.8 (6.6% cases gave definite family history of vitiligo. Exposed areas of the body were commonly affected in majority (66.6% of cases. The legs were commonest site of involvement in 60(50% cases. Circunicript type of vitiligo (46.6% was heading the list. Majority of patients (56.6% had multiple lesions. Diabetes mellitus was found in 2 (2.6% patients. Cause of vitiligo is still idiopathic. Hereditary factors hardly play any role in manifestation of vitiligo

  1. Biomarkers in differentiating clinical dengue cases: A prospective cohort study

    Directory of Open Access Journals (Sweden)

    Gary Kim Kuan Low

    2015-12-01

    Full Text Available Objective: To evaluate five biomarkers (neopterin, vascular endothelial growth factor-A, thrombomodulin, soluble vascular cell adhesion molecule 1 and pentraxin 3 in differentiating clinical dengue cases. Methods: A prospective cohort study was conducted whereby the blood samples were obtained at day of presentation and the final diagnosis were obtained at the end of patients’ follow-up. All patients included in the study were 15 years old or older, not pregnant, not infected by dengue previously and did not have cancer, autoimmune or haematological disorder. Median test was performed to compare the biomarker levels. A subgroup Mann-Whitney U test was analysed between severe dengue and non-severe dengue cases. Monte Carlo method was used to estimate the 2-tailed probability (P value for independent variables with unequal number of patients. Results: All biomarkers except thrombomodulin has P value < 0.001 in differentiating among the healthy subjects, non-dengue fever, dengue without warning signs and dengue with warning signs/severe dengue. Subgroup analysis for all the biomarkers between severe dengue and non-severe dengue cases was not statistically significant except vascular endothelial growth factor-A (P < 0.05. Conclusions: Certain biomarkers were able to differentiate the clinical dengue cases. This could be potentially useful in classifying and determining the severity of dengue infected patients in the hospital.

  2. Case studies of nurseries in Malawi

    DEFF Research Database (Denmark)

    Namoto, M.; Likoswe, M.G.

    This study of 42 case studies of nurseries was made as part of a major sample survey of 360 nurseries in 6 districts in Malawi. The purpose of the study was to let the small nurseries in the country explain in their own words how they source seed, how and for whom they produce seedlings, and to...... explain about their problems and opportunities in the nursery business. The assessment was made within the framework of Improved Seed Supply for Agroforestry in African Countries (ISSAAC), a Danida supported programme implemented in cooperation between Forest & Landscape Denmark and World Agroforestry...

  3. The Pendulum A Case Study in Physics

    CERN Document Server

    Baker, Gregory L

    2005-01-01

    The pendulum: a case study in physics is a unique book in several ways. Firstly, it is a comprehensive quantitative study of one physical system, the pendulum, from the viewpoint of elementary and more advanced classical physics, modern chaotic dynamics, and quantum mechanics. In addition, coupled pendulums and pendulum analogs of superconducting devices are also discussed. Secondly, this book treats the physics of the pendulum within a historical and cultural context,showing, for example, that the pendulum has been intimately connected with studies of the earth's density, the earth's motion,

  4. Management & Communication: Project Management Case Study

    CERN Multimedia

    Nathalie Dumeaux

    2004-01-01

    We are pleased to announce the recent launch of a new workshop on Project Management. This is designed for People with budgetary, scheduling and/or organizational responsibilities in a project or a sub-project. The objectives through a management case study specially suited to CERN are: to become familiar with modern management techniques in use for structuring, planning, scheduling, costing and progress monitoring of a project or a sub-project. to understand in-depth issues associated with Deliverable-oriented Project Management, Earned Value Management, Advanced Project Cost Engineering and Project Risk Management. The full description of this workshop can be found here. The next session will be held on 8 October 2004. If you are interested in this workshop, please contact Nathalie Dumeaux, email or 78144. Programme of Seminars October to December 2004 Situation : 21.09.2004 Séminaires bilingues Dates Jours Places disponibles Project Management Case study 8 October 1 oui Intr...

  5. Marketing and clinical trials: a case study

    Directory of Open Access Journals (Sweden)

    Entwistle Vikki A

    2007-11-01

    Full Text Available Abstract Background Publicly funded clinical trials require a substantial commitment of time and money. To ensure that sufficient numbers of patients are recruited it is essential that they address important questions in a rigorous manner and are managed well, adopting effective marketing strategies. Methods Using methods of analysis drawn from management studies, this paper presents a structured assessment framework or reference model, derived from a case analysis of the MRC's CRASH trial, of 12 factors that may affect the success of the marketing and sales activities associated with clinical trials. Results The case study demonstrates that trials need various categories of people to buy in – hence, to be successful, trialists must embrace marketing strategies to some extent. Conclusion The performance of future clinical trials could be enhanced if trialists routinely considered these factors.

  6. FINAL DISPOSAL OF SOLID URBAN WASTE: ALTERNATIVES FOR THE CITY OF SÃO PAULO BY MEANS OF SUCCESS CASES

    Directory of Open Access Journals (Sweden)

    Ana Karolina Tanaka Seara

    2013-08-01

    Full Text Available The article studies public sanitation services - in as much as solid domestic waste is concerned - within the municipality of São Paulo and employs as base year, that of 2010. Highlights include issues related to the current waste management model in the region and solutions are proposed to those deemed most critical, utilizing as benchmarks, adequate treatments conducted at other globalized cities. The bibliographical review seeks to elucidate concepts that are most aligned with the theme under study. Information concerning the management of solid domestic waste and reverse logistics in the private sector was gathered, whilst findings as to impairments observed in the municipality are listed. Local and international success cases concerning waste disposal were studied with views to encountering sources of potential improvements. It is understood that the adequate destination of residues, by means of recycling, composting or generation of fuels, calls for the population´s commitment in terms of developing separation and waste disposal habits, municipal administration involvement - in as much as supplying the required resources is concerned to ensure progress of alternatives - and finally, cannot do without reverse logistics actions undertaken by producing companies, in full compliance with existing federal rulings. In the quest to expand discussions concerning solid waste, the article attempts to include this matter - in a more effective manner - within strategic and investment decisions taken by both the public and private sectors.

  7. The Graduate Experience: Living and Studying Abroad (A Case Study

    Directory of Open Access Journals (Sweden)

    Rosario Hernández Castañeda

    2008-11-01

    Full Text Available This article is a qualitative case study describing the experience of Angélica an international graduate student from Latin America, who received her doctorate at the University of New Mexico in the United States. Her case demonstrated how administrators and faculty learn about the experience and struggles endured by international students, especially those who learned English a short time before admission to graduate studies. While a single case is understandably idiographic in nature and inevitably requires a larger sample, from the analysis of Angélica’s case and the analysis of the relevant literature common topics emerged persuading me to conclude that the issues that commonly impact the life of international students have to do with: 1 second language problems; 2 the quality of academic advisement received; 3 the availability of financial support; 4 the level of integration into their academic program; and 5 the level of cultural adjustment in their host country.

  8. BOOK REVIEW: Case Studies in Knowledge Management

    OpenAIRE

    Reviewed by Dr. Adnan BOYACI

    2005-01-01

    161Case Studies in Knowledge ManagementEdited by Murray JennexHersley: PA: Idea Group, 2005, pp. 372, ISBN 1-59140-352-9Reviewed by Dr. Adnan BOYACIAnadolu UniversityEskişehir-TurkeyKnowledge management (KM) as a structured system and the way to the effectiveness isrelatively new field for the contemporary organizations functioning in different andcompetitive domain of public and private sectors in terms of getting optimal effectivenessunderlined by the concepts such as quality, productivity…...

  9. Gamification in teaching music : case study

    OpenAIRE

    Gomes, Cristina; Figueiredo, Mauro; Bidarra, José

    2014-01-01

    The study presented here aims to assess the quality of learning that occurred by the introduction of an educational application in the teaching/learning process of music education – 2nd cycle of basic education. The investigation focused on the use of a set of multimedia materials designed to provide support for instrumental practice (recorder and guitar) and backing vocals, according to the technique of the sing along. The students had access to the materials in two ways: in the first case, ...

  10. Case Study on Inventory Management Improvement

    OpenAIRE

    Plinere Darya; Borisov Arkady

    2015-01-01

    Inventory management is a challenging problem area in supply chain management. Companies need to have inventories in warehouses in order to fulfil customer demand, meanwhile these inventories have holding costs and this is frozen fund that can be lost. Therefore, the task of inventory management is to find the quantity of inventories that will fulfil the demand, avoiding overstocks. This paper presents a case study for the assembling company on inventory management. It is proposed to use inve...

  11. Private power financing: a case study

    International Nuclear Information System (INIS)

    The Public Utility Regulatory Power Act (PURPA) in the USA and the UK's Electricity Act passed in 1989 are discussed and the first UK private power project is considered. A case study is presented, and covers the questions of when to approach the bank; banker versus investment bank; project fundamentals; the sponsor and the management team; the strength of the key project agreements; syndication of the project debt; and bank support during construction and operation. (author)

  12. Six Case Studies of Economically Successful Cities

    OpenAIRE

    Kulenovic, Z. Joe; Cech, Alexandra

    2015-01-01

    The objective of this paper is to synthesize the findings of six individual case studies (Bucaramanga, Colombia; Coimbatore, India; Kigali, Rwanda; Gaziantep, Turkey; Changsha, China; and Tangier, Morocco) by analyzing the similarities and dissimilarities among them and identifying common, cross-cutting themes. The intent is to highlight what institutions and strategies successful cities have relied on to spur economic development, under what conditions such success has occurred, and what ...

  13. Systemic Design: Two Canadian Case Studies

    OpenAIRE

    Alex Ryan; Mark Leung

    2014-01-01

    This paper introduces two novel applications of systemic design to facilitate a comparison of alternative methodologies that integrate systems thinking and design. In the first case study, systemic design helped the Procurement Department at the University of Toronto re-envision how public policy is implemented and how value is created in the broader university purchasing ecosystem. This resulted in an estimated $1.5 million in savings in the first year, and a rise in user retention rates fro...

  14. Customer Buying Behavior : Case Study: Algol Technics

    OpenAIRE

    Weckman, Nina

    2009-01-01

    The purpose of this study is to research the customer buying behavior in a specific market. This thesis is made for a subgroup of Algol Technics which specializes in the marketing of driver seats. The research areas included brand recognition, price and quality, as well as the communications channels. The theoretical framework presented consists of the marketing strategies, marketing mix, Porter’s five forces analysis, customer relationship marketing, and market analysis. The case compan...

  15. Six case studies of contents tourism

    OpenAIRE

    Seaton, Philip

    2015-01-01

    This short series of research notes brings together some of the case studies that have been researched by members of the project ‘International Comparative Research on the Spreading and Reception of Culture through Contents Tourism’. This research has been funded since April 2014 by a Japan Society for the Promotion of Science grant (Kiban A, grant number 26243007). However, the project had its roots in a small group research project started in the Research Faculty of Media and...

  16. Case Study for Holylight(HK)

    OpenAIRE

    Ha, Kong Ho

    2013-01-01

    In this thesis the case company – Holylight (HK) was thoroughly studied. The company structure, business strategic management and Marketing mix (4ps) were analyzed using SWOT analysis. It was found that Holylight (HK) had huge poten-tial in the business its stable supplies from the United States of America, Europe and Australia; Alliance partnership company ensure the steady sales channel in potential market – China that further development and expansion are highly feasible. However th...

  17. Hawaii Macadamia Nut Company- A Case Study

    OpenAIRE

    George H. (Jody) Tompson; Dan Verreault; Tompson, Holly B.

    2009-01-01

    Owners of the Hawaii Macadamia Nut Company (HMNC) are facing an expansion opportunity. A land owner has preperty available that would enable the HMNC to expand its acreage and revenue by about 20%. To fully consider this opportunity the owners must decide 1)whether the expansion is strategically and financially viable, 2)how to raise capital to finance the expansion, and 3)whether they have the skills to manage the company's growth during expansion. This is a case study describing a real comp...

  18. Telepractice for Pediatric Dysphagia: A Case Study

    OpenAIRE

    Malandraki, Georgia A.; Melissa Roth; Justine Joan Sheppard

    2014-01-01

    A closed-ended intensive pediatric swallowing telepractice program was developed and piloted in one pediatric patient with Opitz BBB/G and Asperger’s Syndromes, oropharyngeal dysphagia and aerophagia. The present study is a case report. Outcome variables included behavioral, swallowing and quality of life variables, and were assessed at baseline and at the end of the four-week program. Selective variables were also assessed at a follow-up family interview four weeks post program completion. O...

  19. Rumination Syndrome in Ethiopia: A Case Study

    OpenAIRE

    Bruni, Andrea

    2014-01-01

    Eating disorders are commonly believed to be rare or nonexistent in Africa. However, due to exposure to Western culture, a rise in eating disorders among African women is reported in the literature. This case study describes a 17-year-old Ethiopian girl who meets the DSM-IV-TR and DSM-5 diagnostic criteria for bulimia nervosa and the Rome III Diagnostic Criteria for Functional Gastrointestinal Disorders criteria for rumination syndrome. The article discusses the diagnostic delays, the difficu...

  20. Power and organisational change: a case study

    OpenAIRE

    João Pedro Oliveira

    2010-01-01

    This thesis reports the results of a case study conducted in a Portuguese manufacturing organization, a part of a large group, which endured profound organizational changes. The initial objective of the research was to explore, in a processual way, the long-term interactions between an Enterprise Resource Planning (ERP) system, the consultants that implemented it and management accounting and control, in this organization. However, during the fieldwork, the researcher was confronted with an a...

  1. Mobile phone surveys: the Slovenian case study

    OpenAIRE

    VEHOVAR Vasja; Belak, Eva; Batagelj, Zenel; Čikić, Sanja

    2014-01-01

    almost 10% of households are now available only over the mobile phone. With this, Slovenia positions itself as a typical EU country andcan serve as a case study for issues related to mobile phone interview surveys. The paper addresses the general context of mobile phone usage and thecalculations of mobile phone coverage rates. It also discusses the non-coverage problems related to mobile and mobile-only households. It is shown, that even with a relatively small non-coverage the corresponding ...

  2. Mobile phone surveys: the Slovenian case study:

    OpenAIRE

    Batagelj, Zenel; Belak, Eva; Čikić, Sanja; VEHOVAR Vasja

    2004-01-01

    In 2004, the number of mobile phone subscriptions in Slovenia reached the total number of inhabitants. Consequently, the fixed telephone coverage has started to decline; almost 10% of households are now available only over the mobile phone. With this, Slovenia positions itself as a typical EU country and can serve as a case study for issues related to mobile phone interview surveys. The paper addresses the general context of mobile phone usage and the calculations of mobile phone coverage rat...

  3. Case studies of soil in art

    Science.gov (United States)

    Feller, C.; Landa, E. R.; Toland, A.; Wessolek, G.

    2015-08-01

    The material and symbolic appropriations of soil in artworks are numerous and diverse, spanning many centuries and artistic traditions, from prehistoric painting and ceramics to early Renaissance works in Western literature, poetry, paintings, and sculpture, to recent developments in film, architecture, and contemporary art. Case studies focused on painting, installation, and film are presented with the view of encouraging further exploration of art about, in, and with soil as a contribution to raising soil awareness.

  4. Case study: Wireless Sensor Networks Technology

    OpenAIRE

    Naveen Jain; Pawan Shakdwipee; Sunil Sharma

    2013-01-01

    This paper present the history of research in sensor networks over the past decades, including two important programs of the Defense Advanced Research Projects Agency (DARPA), and the Distributed Sensor Networks (DSN) and the Sensor Information Technology (SensIT) programs. Technology trends that impact the development of sensor networks are reviewed, and new applications such as infrastructure security, habitat monitoring. The paper concludes by presenting some recent case studies results in...

  5. A Codesign Case Study in Computer Graphics

    OpenAIRE

    Brage, Jens P.; Madsen, Jan

    1994-01-01

    The paper describes a codesign case study where a computer graphics application is examined with the intention to speed up its execution. The application is specified as a C program, and is characterized by the lack of a simple compute-intensive kernel. The hardware/software partitioning is based on information obtained from software profiling and the resulting design is validated through cosimulation. A locally developed interface model, Merlin, is used as the basis for co-simulation. The ac...

  6. A warehouse design decision model: case study

    OpenAIRE

    Geraldes, Carla A. S.; Carvalho, Maria do Sameiro; Pereira, Guilherme

    2008-01-01

    Today’s competitive and volatile market requires flexibility, quality and efficiency from the logistics operations. In this context, warehouses are an important link of the logistic chain and warehouse management plays an important role over customer's service. Throughout this work we analyze a mathematical model aiming to support warehouse management decisions. A case study is used for that purpose and the model jointly identifies product allocation to the functional areas in the warehouse, ...

  7. Web Fuzzy Clustering and a Case Study

    Institute of Scientific and Technical Information of China (English)

    LIU Mao-fu; HE Jing; HE Yan-xiang; HU Hui-jun

    2004-01-01

    We combine the web usage mining and fuzzy clustering and give the concept of web fuzzy clustering, and then put forward the web fuzzy clustering processing model which is discussed in detail. Web fuzzy clustering can be used in the web users clustering and web pages clustering. In the end, a case study is given and the result has proved the feasibility of using web fuzzy clustering in web pages clustering.

  8. Marketing and clinical trials: a case study

    OpenAIRE

    Entwistle Vikki A; Snowdon Claire; Garcia Jo; Knight Rosemary C; Shakur Haleema; Elbourne Diana R; Roberts Ian; Francis David; McDonald Alison M; Grant Adrian M; Campbell Marion K

    2007-01-01

    Abstract Background Publicly funded clinical trials require a substantial commitment of time and money. To ensure that sufficient numbers of patients are recruited it is essential that they address important questions in a rigorous manner and are managed well, adopting effective marketing strategies. Methods Using methods of analysis drawn from management studies, this paper presents a structured assessment framework or reference model, derived from a case analysis of the MRC's CRASH trial, o...

  9. Studies of direct final disposal of fuel elements

    International Nuclear Information System (INIS)

    The research and development programme for 'Direct Final Disposal' comprises works compiled for direct disposal of high-temperature fuel elements which, as regards the direct disposal of IWR fuel elements, are either carried out independently by the DWK (conditioning and development of tanks), or coordinated by the project group for Other Waste Disposal Techniques (PAE) of the KfK on behalf of the Federal Ministry of Research and Technology (repository). Part A of the research and development programme includes work on the direct disposal of high-temperature fuel elements. Part B comprises work on the direct disposal of LWR fuel elements. (orig./DG)

  10. Final Report for Studies in Elementary Particle Physics

    Energy Technology Data Exchange (ETDEWEB)

    Piilonen, Leo; Takeuchi, Tatsu; Minic, Djordje; Link, Jonathan

    2013-11-01

    This is the final report of DOE Grant DE-FG05-92ER40709 awarded to the Virginia Tech high energy physics group. It covers the period February 1, 2010 through April 30, 2013. The high energy physics program at Virginia Tech supported by this grant is organized into three tasks: A for theory (Profs. Tatsu Takeuchi and Djordje Minic), B for heavy flavor physics with the Belle and Belle II experiments (Prof. Leo Piilonen), and N for neutrino physics (Profs. Jonathan Link and Piilonen).

  11. Studies of multihadronic final states in photon-photon interactions

    International Nuclear Information System (INIS)

    We have measured the cross section and Q2-dependence of the reaction γγ→multihadrons, using the CELLO detector at DESY, for visible final-state masses between 4 and 9 GeV. The data are well fitted by an incoherent sum of Generalised Vector Meson Dominance and Quark Parton Model terms, but at low Q2 require the addition of a third component which resembles the QPM but is less two-jet-like. With and without this term, the GVDM cross section at Q2=0 is found to be 200±20 and 250±25 nb, respectively. (orig.)

  12. Shuttle Transportation System Case-Study Development

    Science.gov (United States)

    Ransom, Khadijah

    2012-01-01

    A case-study collection was developed for NASA's Space Shuttle Program. Using lessons learned and documented by NASA KSC engineers, analysts, and contractors, decades of information related to processing and launching the Space Shuttle was gathered into a single database. The goal was to provide educators with an alternative means to teach real-world engineering processes and to enhance critical thinking, decision making, and problem solving skills. Suggested formats were created to assist both external educators and internal NASA employees to develop and contribute their own case-study reports to share with other educators and students. Via group project, class discussion, or open-ended research format, students will be introduced to the unique decision making process related to Shuttle missions and development. Teaching notes, images, and related documents will be made accessible to the public for presentation of Space Shuttle reports. Lessons investigated included the engine cutoff (ECO) sensor anomaly which occurred during mission STS-114. Students will be presented with general mission infom1ation as well as an explanation of ECO sensors. The project will conclude with the design of a website that allows for distribution of information to the public as well as case-study report submissions from other educators online.

  13. Systemic Design: Two Canadian Case Studies

    Directory of Open Access Journals (Sweden)

    Alex Ryan

    2014-12-01

    Full Text Available This paper introduces two novel applications of systemic design to facilitate a comparison of alternative methodologies that integrate systems thinking and design. In the first case study, systemic design helped the Procurement Department at the University of Toronto re-envision how public policy is implemented and how value is created in the broader university purchasing ecosystem. This resulted in an estimated $1.5 million in savings in the first year, and a rise in user retention rates from 40% to 99%. In the second case study, systemic design helped the clean energy and natural resources group within the Government of Alberta to design a more efficient and effective resource management system and shift the way that natural resource departments work together. This resulted in the formation of a standing systemic design team and contributed to the creation of an integrated resource management system. A comparative analysis of the two projects identifies a shared set of core principles for systemic design as well as areas of differentiation that reveal potential for learning across methodologies. Together, these case studies demonstrate the complementarity of systems thinking and design thinking, and show how they may be integrated to guide positive change within complex sociotechnical systems.

  14. Capturing Cultural Glossaries: Case-study II

    Directory of Open Access Journals (Sweden)

    Matete Madiba

    2011-10-01

    Full Text Available

    ABSTRACT: This case-study attempts to present a brief glossary of Northern Sotho medical terms. It is a follow-up of a similar case-study (Madiba, Mphahlele and Kganyago 2003, which was an attempt to capture and present Northern Sotho cooking terms. Case-study I consists of the names for utensils, ingredients and the processes involved in the preparation of cultural dishes. With both these case-studies, the intention has been to use the opportunities availing themselves for the pres-ervation and valorisation of Northern Sotho, including the extension of its corpora to support national dictionary-making processes. The case-study methodology has been very useful for the purposes of this project and the context within which it was undertaken. It aims to provide a model for the collection and presentation of authentic Northern Sotho terminology which otherwise would hardly have been accessible.

    Keywords: CULTURAL GLOSSARY, INDIGENOUS KNOWLEDGE SYSTEMS, CORPUS, OUTCOMES-BASED EDUCATION, ASSESSMENT CRITERIA, TRADITIONAL MEDICAL TERMS, COMMUNICATIVE APPROACH, STRUCTURAL APPROACH, METONYMY, HANDS-ON ACTIVITIES, TASK-BASED LEARNING

    *****

    OPSOMMING: Die totstandbrenging van kulturele woordversamelings: Ge-vallestudie II. Hierdie gevallestudie probeer om 'n beperkte woordelys van Noord-Sotho- mediese terme aan te bied. Dit is 'n voortsetting van 'n soortgelyke gevallestudie (Madiba, Mpha-hlele en Kganyago 2003 wat 'n poging was om Noord-Sothokookterme te versamel en aan te bied. Gevallestudie I bestaan uit die name van gereedskap, bestanddele, en die prosesse betrokke by die voorbereiding van kulturele geregte. Met altwee hierdie gevallestudies was die bedoeling om die geleenthede te gebruik wat hulleself aanbied vir die bewaring en bestendiging van Noord-Sotho, insluitende die uitbreiding van sy korpora om die nasionale woordeboeksamestellingsprosesse te ondersteun. Die gevallestudiemetodologie was baie nuttig vir die doeleindes van

  15. Case studies in atomic collision physics

    CERN Document Server

    McDaniel, E W

    2013-01-01

    Case Studies in Atomic Collision Physics II focuses on studies on the role of atomic collision processes in astrophysical plasmas, including ionic recombination, electron transport, and position scattering. The book first discusses three-body recombination of positive and negative ions, as well as introduction to ionic recombination, calculation of the recombination coefficient, ions recombining in their parent gas, and three-body recombination at moderate and high gas-densities. The manuscript also takes a look at precision measurements of electron transport coefficients and differential cr

  16. Using Case Studies to Teach About Global Issues, Bali: A Case Study

    Science.gov (United States)

    Oswald, James M.

    1974-01-01

    The South Pacific island of Bali is used as a case study of overpopulation and food shortage. A brief description of the resources, the typical lifestyle of the Balinese farmer, and possible teaching techniques are given. (DE)

  17. Discrete Surface Modeling Based on Google Earth: A Case Study

    CERN Document Server

    Mei, Gang; Xu, Nengxiong

    2012-01-01

    Google Earth (GE) has become a powerful tool for geological, geophysical and geographical modeling; yet GE can be accepted to acquire elevation data of terrain. In this paper, we present a real study case of building the discrete surface model (DSM) at Haut-Barr Castle in France based on the elevation data of terrain points extracted from GE using the COM API. We first locate the position of Haut-Barr Castle and determine the region of the study area, then extract elevation data of terrain at Haut-Barr, and thirdly create a planar triangular mesh that covers the study area and finally generate the desired DSM by calculating the elevation of vertices in the planar mesh via interpolating with Universal Kriging (UK) and Inverse Distance Weighting (IDW). The generated DSM can reflect the features of the ground surface at Haut-Barr well, and can be used for constructingthe Sealed Engineering Geological Model (SEGM) in further step.

  18. Using Case Study Analysis and Case Writing to Structure Clinical Experiences in a Teacher Education Program

    Science.gov (United States)

    Floyd, Deborah M.; Bodur, Yasar

    2005-01-01

    This study reports on the design and results of a two-semester study on the use of case study analysis and case writing in clinical experiences in an undergraduate teacher education program. Findings indicated that structured experiences with case studies and case writing increase preservice teachers' informed decision making on educational…

  19. NLRB CATS Final C-Case Data Bulk 19990101-20110930 in XML

    Data.gov (United States)

    National Labor Relations Board — NLRB C-Case (Unfair Labor Practice) data from CATS (Case Activity Tracking System) for the period of 01/01/1999 through 09/30/2011. Please be aware that from April...

  20. NLRB CATS Final R-Case Data Bulk 19990101-20110930 in XML

    Data.gov (United States)

    National Labor Relations Board — NLRB R-Case (Elections) data from CATS (Case Activity Tracking System) for the period of 01/01/2010 through 12/31/2010. Please be aware that from April 2011 through...

  1. The Danish National Case Study Report

    DEFF Research Database (Denmark)

    Brodersen, Søsser; Jørgensen, Michael Søgaard

    This report is the Danish case study report in the EU-financed project INTERACTS, which analyses experience and expectations to the interaction between NGOs, Science Shops and universities. The report analyses potentials and barriers to NGO’s and similar civil society groups’ use of research and...... pond. Each case is described and reflected separately. A cross-analysis analyses the interactions among the involved actor group (clients, students, researchers, and Science Shops) discussing how the knowledge in the projects were developed and how the knowledge were used by the actors to try to gain...... impact on either research development or societal discourses. When civil society groups request assistance through the Science Shops, their need for knowledge and research is based on a need for scientific documentation of a certain topic, a need for enhancement of new knowledge and/or a need for...

  2. Study of sampling systems for comets and Mars. Final report

    International Nuclear Information System (INIS)

    Several aspects of the techniques that can be applied to acquisition and preservation of samples from Mars and a cometary nucleus were examined. Scientific approaches to sampling, grounded in proven engineering methods are the key to achieving the maximum science value from the sample return mission. If development of these approaches for collecting and preserving does not preceed mission definition, it is likely that only suboptimal techniques will be available because of the constraints of formal schedule timelines and the normal pressure to select only the most conservative and least sophisticated approaches when development has lagged the mission milestones. With a reasonable investment now, before the final mission definition, the sampling approach can become highly developed, ready for implementation, and mature enough to help set the requirements for the mission hardware and its performance

  3. Studies of final state interactions via femtoscopy in ALICE

    CERN Document Server

    ,

    2016-01-01

    Femtoscopy is a technique enabling measurements of the space-time characteristics of particle-emitting sources. However, the femtoscopic analysis is also sensitive to the interaction cross-section. In this paper we show the first preliminary measurements of $\\rm K^0_SK^{\\pm}$ correlation functions in Pb-Pb collisions at $\\sqrt{s_{\\rm NN}}=5.02$ TeV. These correlations originate from the final-state interactions which proceed through the $a_0(980)$ resonance only and can be employed to constrain its parameters. A similar approach can be applied to baryon pairs to extract the unknown interaction cross-sections for some (anti-)baryon-(anti-)baryon pairs. We show baryon--baryon and baryon--anti-baryon correlation functions of protons and lambdas, as well as discuss shortly the fitting method.

  4. Supplement to final report for ''Theoretical studies in tokamaks''

    International Nuclear Information System (INIS)

    In a previous report we summarized the results obtained for Task I of Contract Number AC03-88ER53270 for the two-year period of performance of the work supported by the contract. That report constituted the final report for Task 1. Since then, the contract was extended and the funding for Task I was incremented with $35K of new funds. The purpose for incrementing the contract was to begin a collaboration with the PBX-M group at Princeton Plasma Physics Laboratory (PPPL) in the area of ion Bernstein wave (IBW) effects in the PBX-M experiment. This report summarizes the initial results of that collaboration obtained under the incremental continuation funding. In the intervening period, experimental and theoretical program directions changed so that no further funds were committed to Task 1

  5. Studies of high energy phenomena using muons. Final report

    International Nuclear Information System (INIS)

    This report covers the activities of the NIU high energy physics group as supported by DOE contract DE-FG02-91ER40641.A000 during the period from 1992 to 1995, and is the final report for this award. The group had three main efforts. The first was the D0 experiment at the Fermilab proton-antiproton collider, with major emphasis on its muon system. The second is the involvement of a portion of the group in Fermilab Experiment 789. Finally, the authors were members of the SDC collaboration at the SSC. The group consisted of four faculty members, three research associates, and undergraduate and graduate students. The D0 experiment at Fermilab is one of two (the other is CDF) general purpose experiments operating at the Tevatron proton-antiproton collider. Starting in the Fall of 1992, the first data collection occurred at D0. Physics publications are tabulated in the Appendix, with the discovery of the top quark in 1995 being the most prominent. Members of the NIU group worked on a variety of physics topics: Hedin on B-physics and the top-quark search, Fortner on Drell-Yan and other QCD topics, Green on di-Boson production, and Markeloff on excited-quark states. Hedin was also co-coordinator of the B-physics group during this period. The primary emphasis of the NIU D0 group was the muon system. NIU had particular responsibilities for data acquisition; chamber calibration; the Level-2 trigger; and the reconstruction. Hedin also was coordinator of muon software and had the responsibility for muon identification. Work on these items is summarized in a series of D0 Notes listed in the Appendix. Willis, Sirotenko, Hedin and Fortener were also members of the SDC collaboration at the SSC. NIU was a key participant in the calculation of low-energy neutron and photon backgrounds in the SDC experiment, and in designing shielding for the proposed muon system

  6. Interdisciplinary study of reservoir compartments and heterogeneity. Final report, October 1, 1993--December 31, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Van Kirk, C.

    1998-01-01

    A case study approach using Terry Sandstone production from the Hambert-Aristocrat Field, Weld County, Colorado was used to document the process of integration. One specific project goal is to demonstrate how a multidisciplinary approach can be used to detect reservoir compartmentalization and improve reserve estimates. The final project goal is to derive a general strategy for integration for independent operators. Teamwork is the norm for the petroleum industry where teams of geologists, geophysicists, and petroleum engineers work together to improve profits through a better understanding of reservoir size, compartmentalization, and orientation as well as reservoir flow characteristics. In this manner, integration of data narrows the uncertainty in reserve estimates and enhances reservoir management decisions. The process of integration has proven to be iterative. Integration has helped identify reservoir compartmentalization and reduce the uncertainty in the reserve estimates. This research report documents specific examples of integration and the economic benefits of integration.

  7. Guidelines for Conducting Positivist Case Study Research in Information Systems

    OpenAIRE

    Graeme Shanks

    2002-01-01

    The case study research approach is widely used in a number of different ways within the information systems community. This paper focuses on positivist, deductive case study research in information systems. It provides clear definitions of important concepts in positivist case study research and illustrates these with an example research study. A critical analysis of the conduct and outcomes of two recently published positivist case studies is reported. One is a multiple case study that vali...

  8. [Clinical and etiologic study of 90 cases of chronic diarrhea].

    Science.gov (United States)

    Farfán Flores, G; Sánchez, G; Tello, R; Villanueva, G

    1993-01-01

    90 patients with chronic diarrhoea underwent this prospective study. They were seen in a private hospital of Lima during 1990 and 1991. According to a methodologic plan for determining sources and the diseases that originate chronic diarrhoea. In all patients hematologic, bioquimic, coprocultures, coproparasitologic exams were done, chest and intestinal transit X-rays. All underwent duodenal content culture. Colon X-ray in 25 cases; proctosigmoidoscopy in 14 and upper digestive endoscopy in 19 patients. Abdominal echography in 12 and TAC in 2 cases. The final results showed as determinant diseases for chronic diarrhoea, according to their frequency: enteroparasitosis (23.3%), functional digestive disorders (20.0%), intestinal bacterial overpopulation (15.5%) of unknown origin (8.8%), colon diverticulus (7.7%) proven and probably (5.5%), lactose intolerance (3.3%), diabetes mellitus (2.2%), and in one case (1.1%) the following: intestinal linfoma, pancreas malignancy, AIDS, colonic and deformation and megaloblastic anemia. The causes of chronic diarrhoea are several and multifactorals and in this study we prove the preeminence of the intestinal parasitosis, functional disorders and intestinal bacterial overpopulation and with less frequency other pathologies. PMID:8219099

  9. AM(VI) PARTITIONING STUDIES: FY14 FINAL REPORT

    Energy Technology Data Exchange (ETDEWEB)

    Bruce J Mincher

    2014-10-01

    The use of higher oxidation states of americium in partitioning from the lanthanides is under continued investigation by the sigma team. This is based on the hypothesis that Am(VI) can be produced and remain stable in irradiated first cycle raffinate solution long enough to perform solvent extraction for separations. The stability of Am(VI) to autoreduction was measured using millimolar americium concentrations in a 1-cm cell with a Cary 6000 UV/Vis spectrophotometer for data acquisition. At millimolar americium concentrations, Am(VI) is stable enough against its own autoreduction for separations purposes. A second major accomplishment during FY14 was the hot test. Americium oxidation and extraction was performed using a centrifugal contactor-based test bed consisting of an extraction stage and two stripping stages. Sixty-three percent americium extraction was obtained in one extraction stage, in agreement with batch contacts. Promising electrochemical oxidation results have also been obtained, using terpyridine ligand derivatized electrodes for binding of Am(III). Approximately 50 % of the Am(III) was oxidized to Am(V) over the course of 1 hour. It is believed that this is the first demonstration of the electrolytic oxidation of americium in a non-complexing solution. Finally, an initial investigation of Am(VI) extraction using diethylhexylbutyramide (DEHBA) was performed.

  10. Environmental qualification - facilities and case studies

    International Nuclear Information System (INIS)

    The term environmental qualification is used for assurance or guarantee for satisfactory performance of hardware under specified environmental conditions including normal, abnormal and accident conditions. To generate confidence about satisfactory performance in reasonable time, hardware must be tested under accelerated conditions. For testing and measuring performance parameters, it is essential to have adequate facilities and experienced and inquisitive staff so that qualified and reliable hardware can be manufactured by active participation of manufacturers, users and researchers. Top priority is given to the determination of characteristics, capabilities and limitations of hardware before really starting accelerated testing so that maximum information can be extracted before failure of hardware. This paper describes test and measurement facilities set up at the Bhabha Atomic Research Centre for environmental qualification and some case studies where it has been possible to make significant contributions towards reliability assessment, upgrading and indigenisation. Apart from climatic test facilities (thermal and humidity chambers), a Loss Of Coolant Accident (LOCA) environment simulator and synergistic simulator (combined environment test facility comprising temperature, humidity, gamma radiation and electrical stresses for studying interaction effects) have been set up. Notable case studies are :(1) Assessment of residual life-spans of cables and elastomeric components, (2) Reliability upgradation of indicating alarm meters and solenoid valves, (3) Assessment of survival capability of process instruments under LOCA environment, (4)Assessment of reusability of relays exposed to smoke and water spray in fire incident in a nuclear power station. (author)

  11. Case Study of the California Cement Industry

    OpenAIRE

    Coito, Fred; Powell, Frank; Worrell, Ernst; Price, Lynn; Friedmann, Rafael

    2005-01-01

    California is the largest cement producing state in the U.S., accounting for between 10 percent and 15 percent of U.S. cement production and cement industry employment. The cement industry in California consists of 31 sites that consume large amounts of energy, annually: 1,600 GWh of electricity, 22 million therms of natural gas, 2.3 million tons of coal, 0.25 tons of coke, and smaller amounts of waste materials, including tires. The case study summarized in this paper focused on providi...

  12. Metrology in Pharmaceutical Industry - A Case Study

    Science.gov (United States)

    Yuvamoto, Priscila D.; Fermam, Ricardo K. S.; Nascimento, Elizabeth S.

    2016-07-01

    Metrology is recognized by improving production process, increasing the productivity, giving more reliability to the measurements and consequently, it impacts in the economy of a country. Pharmaceutical area developed GMP (Good Manufacture Practice) requeriments, with no introduction of metrological concepts. However, due to Nanomedicines, it is expected this approach and the consequent positive results. The aim of this work is to verify the level of metrology implementation in a Brazilian pharmaceutical industry, using a case study. The purpose is a better mutual comprehension by both areas, acting together and governmental support to robustness of Brazilian pharmaceutical area.

  13. A Codesign Case Study in Computer Graphics

    DEFF Research Database (Denmark)

    Brage, Jens P.; Madsen, Jan

    1994-01-01

    The paper describes a codesign case study where a computer graphics application is examined with the intention to speed up its execution. The application is specified as a C program, and is characterized by the lack of a simple compute-intensive kernel. The hardware/software partitioning is based...... on information obtained from software profiling and the resulting design is validated through cosimulation. A locally developed interface model, Merlin, is used as the basis for co-simulation. The achieved speed-up is estimated based on an analysis of profile information....

  14. Russian Media Educators: Case Studies Portraits

    Directory of Open Access Journals (Sweden)

    Alexander Fedorov

    2013-01-01

    Full Text Available This article is devoted to case studies of the media education works of some well knowns Russian media educators. The analysis of media educational work of the famous Russian media educators leads us to the conclusion that media education in Russia is developing, building on the synthesis of the aesthetic, socio-cultural, and practical concepts, with a focus on the development of media competence of the audience, mainly school and youth. The enthusiasts of media education, even devoid of substantial public support for its innovative projects, achieve significant and meaningful results.

  15. Reinforcement learning: Solving two case studies

    Science.gov (United States)

    Duarte, Ana Filipa; Silva, Pedro; dos Santos, Cristina Peixoto

    2012-09-01

    Reinforcement Learning algorithms offer interesting features for the control of autonomous systems, such as the ability to learn from direct interaction with the environment, and the use of a simple reward signalas opposed to the input-outputs pairsused in classic supervised learning. The reward signal indicates the success of failure of the actions executed by the agent in the environment. In this work, are described RL algorithmsapplied to two case studies: the Crawler robot and the widely known inverted pendulum. We explore RL capabilities to autonomously learn a basic locomotion pattern in the Crawler, andapproach the balancing problem of biped locomotion using the inverted pendulum.

  16. Case study: Bioremediation in the Aleutian Islands

    International Nuclear Information System (INIS)

    This case study describes the design, construction, and operation of a bioremediation pile on Adak Island, which is located in the Aleutian Island chain. Approximately 1,900 m3 of petroleum-contaminated soil were placed in the bioremediation pile. The natural bioremediation process was enhanced by an oxygen and nutrient addition system to stimulate microbial activity. Despite the harsh weather on the island, after the first 6 months of operation, laboratory analyses of soil samples indicated a significant (80%) reduction in diesel concentrations

  17. Wind to Hydrogen in California: Case Study

    Energy Technology Data Exchange (ETDEWEB)

    Antonia, O.; Saur, G.

    2012-08-01

    This analysis presents a case study in California for a large scale, standalone wind electrolysis site. This is a techno-economic analysis of the 40,000 kg/day renewable production of hydrogen and subsequent delivery by truck to a fueling station in the Los Angeles area. This quantity of hydrogen represents about 1% vehicle market penetration for a city such as Los Angeles (assuming 0.62 kg/day/vehicle and 0.69 vehicles/person) [8]. A wind site near the Mojave Desert was selected for proximity to the LA area where hydrogen refueling stations are already built.

  18. Study of polyelectrolytes for Los Alamos National Laboratory. Final report

    International Nuclear Information System (INIS)

    To assess the safety of a potential radioactive waste repository, analysis of the fluid solution containing low levels of activity need to be performed. In some cases, the radioactivity would be so weak (3--30 pCi/L) that the solution must be concentrated for measurement. For this purpose, Los Alamos National Laboratory scientists are synthesizing some water soluble polyelectrolytes, which, because they are strong complexing agents for inorganic cations, can concentrate the radioelements in solution. To assist in characterization of these polyelectrolytes, the author has performed experiments to determine physico-chemical constants, such as pKa values and stability constants. The complexation constants between both polyelectrolytes and europium were determined by two methods: solvent extraction and ion exchange. Results are presented

  19. A Case Study on Primary Problem Student in Yemen

    Institute of Scientific and Technical Information of China (English)

    DENG Hui-hua

    2014-01-01

    Nowadays, problem student is a common phenomenon exiting in primary and secondary school, Yemen. However, current unknown is why problem students appear and how to make an effective intervention way for reducing the problem behaviors. Although there have been many researches about problem student's problem behaviors researches on causes, developmental mechanism and educational strategies of problem students mainly stay on the theoretical research stage. This study aimed to investigate main reason for the formation of problem students and then make an effective intervention way and examine the invention effect.Firstly, combining existing research literature and teaching experience, this study sums up that problem behavior of problem students is mainly learning problem, interpersonal problem and willpower problem.Secondly, this study selected ten“problem students”of primary school as the participants. They are simply classified into three categories in accordance with the severity of the problem behaviors of problem students. I summarized various causes and affecting factors of problem behaviors through observing their performances and behaviors, and conduct in-depth interviews and explorations throughout the whole research process.Thirdly, on the basis of kind and severity of problems, various flexibly methods were used for the intervention study of problem behaviors. After that, I conducted interviews with the study cases, parents and teachers once again and made tracked records for the intervention effect. The intervention achieves marked improvement. For example, most students greatly improve their behaviors in class.Finally, I reflect the research process itself, considering that the case study is necessary method for the issue of"problem students". The use of qualitative research method is more conducive to enter the inner world of the studying cases, and better understand their true conditions as well. And on this basis, it is easier to find a breakthrough

  20. Description of common methodology used in all case studies, following the ILCD methodology guide and the ISO standards for LCA (ISO 14040 and 14044)

    DEFF Research Database (Denmark)

    Sonesson, Ulf; Anton, Assumpcio; Ohlau, Katrin;

    2011-01-01

    This document describes common methodological issues for the case studies within LC-IMPACT. There will be five case studies in three areas performed within the project. The case studies are: Tomatoes, Margarine, Fish, Paper and printing and finally car manufacture and operation. In each case stud...

  1. Employee perceptions of code of conduct content, purpose and implementation: a case study

    OpenAIRE

    Karhujoki, Helena

    2013-01-01

    Objective of the study The objective of the study was to determine how employees of the case company perceive and understand the purpose and content of the company's updated code of conduct, and how they experienced the code of conduct implementation. The final objective was to help the case organization to identify what measures should be taken in order to ensure the vitality of the code of conduct also in the future, and to further improve the ethical and compliant corporate culture. ...

  2. Washoe Tribe Alternative Energy Feasibility Study Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Jennifer [Washoe Tribe of NV and CA

    2014-10-01

    The Washoe Tribe of Nevada and California was awarded funding to complete the Washoe Tribe Alternative Energy Feasibility Study project. The main goal of the project was to complete an alternative energy feasibility study. This study was completed to evaluate “the potential for development of a variety of renewable energy projects and to conduct an alternative energy feasibility study that determines which alternative energy resources have the greatest economic opportunity for the Tribe, while respecting cultural and environmental values” (Baker-Tilly, 2014). The study concluded that distributed generation solar projects are the best option for renewable energy development and asset ownership for the Washoe Tribe. Concentrating solar projects, utility scale wind projects, geothermal, and biomass resource projects were also evaluated during the study and it was determined that these alternatives would not be feasible at this time.

  3. The Effect of Using Case Studies in Business Statistics

    Science.gov (United States)

    Pariseau, Susan E.; Kezim, Boualem

    2007-01-01

    The authors evaluated the effect on learning of using case studies in business statistics courses. The authors divided students into 3 groups: a control group, a group that completed 1 case study, and a group that completed 3 case studies. Results evidenced that, on average, students whom the authors required to complete a case analysis received…

  4. Combining genetic association study designs: a GWAS case study

    OpenAIRE

    Estus, Janice L.; ,; Fardo, David W.

    2013-01-01

    Genome-wide association studies (GWAS) explore the relationship between genome variability and disease susceptibility with either population- or family-based data. Here, we have evaluated the utility of combining population- and family-based statistical association tests and have proposed a method for reducing the burden of multiple testing. Unrelated singleton and parent-offspring trio cases and controls from the Genetics of Kidneys in Diabetes (GoKinD) study were analyzed for genetic associ...

  5. Industrial Education Ventilation Study. Volume 1: Final Report.

    Science.gov (United States)

    Stanley Associates, Edmonton (Alberta).

    A study assessed aspects of ventilation in industrial education facilities in selected junior and senior highs schools in Alberta (Canada). This report describes the purpose of the study and the four test methods used to acquire school specific information. Also discussed are (1) the results of the instructors' perception survey, the ventilation…

  6. Social Architecture: An Emergency Management Case Study

    Directory of Open Access Journals (Sweden)

    Asif Qumer Gill

    2015-03-01

    Full Text Available Emergency management agencies are progressively using social media for the sourcing and distribution of disaster information. Emergency management agencies are often unsure as to how to best identify and assess social media concerns (e.g. information security, trust which must be addressed to develop a social media-enabled disaster information management environment. This paper adopts the Social Architecture Viewpoint Assessment (SAVA framework for identifying and assessing social media concerns from four different viewpoints: IT, Value, Resource and Management. This paper demonstrates the use of the SAVA framework in the context of an in-depth empirical case study of an Australian emergency management agency. The results of this study indicate that the SAVA framework is useful for emergency information management managers in identifying and assessing social media concerns.

  7. Commercializing Emerging Renewable Energy: A Case Study

    Directory of Open Access Journals (Sweden)

    Matti Lehtovaara

    2012-12-01

    Full Text Available A broad scientific consensus exists that the global climate is changing. The Earth’s surface temperature could rise significantly over the next few decades, leading to us witnessing an entirely new and unknown planet. Improved energy efficiency, decreasing use of fossil fuels and wide diffusion of various renewable energy sources are among the focal measures to limit global warming to a sustainable level. The objective of this study is to analyse how renewable energy, such as wind power and bioenergy, could be efficiently commercialized. The evaluation is based on a case study and expert analyses exploiting lateral and parallel thinking methods, and group decision support systems tools. The results reveal that some of the generated ideas are ready for implementation to commercialize renewable energy, whereas others still require technical and commercial development and improvements before maturity.

  8. [Paleoclimatology studies for Yucca Mountain site characterization]. Final report

    International Nuclear Information System (INIS)

    This report consists of two separate papers: Fernley Basin studies; and Influence of sediment supply and climate change on late Quaternary eolian accumulation patterns in the Mojave Desert. The first study involved geologic mapping of late Quaternary sediments and lacustrine features combined with precise control of elevations and descriptions of sediments for each of the major sedimentary units. The second paper documents the response of a major eolian sediment transport system in the east-central Mojave Desert: that which feeds the Kelso Dune field. Information from geomorphic, stratigraphic, and sedimentologic studies of eolian deposits and landforms is combined with luminescence dating of these deposits to develop a chronology of periods of eolian deposition. Both studies are related to site characterization studies of Yucca Mountain and the forecasting of rainfall patterns possible for the high-level radioactive waste repository lifetime

  9. Marin Solar Village: feasibility study and technical analysis. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1980-08-31

    The energy needs of Hamilton Air Force Base's Solar Village for electricity and heating and cooling of buildings are considered and alternative ways of meeting the Village's requirements for these forms of energy are evaluated. First, Solar Village's energy demand is calculated and compared to a base case representing calculations for typical energy usage for a development of similar size and density that is in conformance with current state and local ordinances. The potential of selected alternative technologies to meet the Solar Village projected demand for electrical power and natural gas is evaluated. Scenarios were developed to reduce demand, particularly in the building sector. Four alternative on-site energy technologies have been evaluated: wind, solar thermal electric, biomass conversion, photovoltaics. Each alternative is analyzed in detail. Of the four alternatives considered, the one with the greatest present potential is biomass conversion. Two technologies have been incorporated into the design. A 3-acre land fill is covered with a mantle of soil. A network of pipes carries off the methane gas which is a natural product of anaerobic decomposition of the materials in the land fill. The second technology involves the planting of rapidly-growing trees on denuded and unused portions of the site; 50 acres devoted to tree production could yield 12% of the back-up energy required for home heating on a sustainable basis.

  10. Final Report: Feasibility Study of Biomass in Snohomish County, Washington

    Energy Technology Data Exchange (ETDEWEB)

    Daryl Williams (Tulalip Tribes); Ray Clark (Clark Group)

    2005-01-31

    This report and its attachments summarizes the results of a unique tribal-farmer cooperative study to evaluate the feasibility of building one or more regional anaerobic digestion systems in Snohomish County, Washington.

  11. Networking and Information Technology Workforce Study: Final Report

    Data.gov (United States)

    Networking and Information Technology Research and Development, Executive Office of the President — This report presents the results of a study of the global Networking and Information Technology NIT workforce undertaken for the Networking and Information...

  12. 2006 Final Transmission Proposal: Revenue Requirement Study Documentation.

    Energy Technology Data Exchange (ETDEWEB)

    United States. Bonneville Power Administration.

    2005-06-01

    The purpose of the Revenue Requirement Study (Study) is to establish the level of revenues needed from rates for Bonneville Power Administration's (BPA's) transmission and ancillary services to recover, in accordance with sound business principles, costs associated with the transmission of electric power over the Federal Columbia River Transmission System (FCRTS). The FCRTS is part of the larger Federal Columbia River Power System (FCRPS) which also includes the hydroelectric, multipurpose facilities constructed and operated by the U.S. Army Corps of Engineers and the Bureau of Reclamation in the Pacific Northwest. The FCRPS costs that are not included in the FCRTS costs are funded and repaid through BPA power rates. The transmission revenue requirements herein include: recovery of the Federal investment in transmission and transmission-related assets; the operations and maintenance (O&M) and other annual expenses associated with the provision of transmission and ancillary services; the cost of generation inputs for ancillary services and other between business-line services necessary for the transmission of power; and all other transmission-related costs incurred by the Administrator. The cost evaluation period for this rate proposal includes Fiscal Years (FYs) 2005-2007, the period extending from the last year for which historical information is available through the proposed rate test period. The Study includes the transmission revenue requirements for the rate test period, FYs 2006-2007 (Rate Period) and the results of transmission repayment studies. This Study outlines the policies, forecasts, assumptions, and calculations used to determine BPA's transmission revenue requirements. Legal requirements are summarized in Chapter 5 of this Study. The Revenue Requirement Study Documentation (Documentation), TR-06-FS-BPA-01A, contains key technical assumptions and calculations, the results of the transmission repayment studies, and a further

  13. From survey data to virtual environment. Two case studies

    Directory of Open Access Journals (Sweden)

    Manuela Incerti

    2014-12-01

    Full Text Available In this paper we present the latest experiences carried out by our research group in the field of multimedia communication. Starting from the construction of virtual models, interactive and non-interactive, we pursued the aim to introduce edutainment paths in some museum contexts, both increasing the value of cultural assets and creating an attractive pole for the visitors. The current trends are gradually transforming museums from static places of conservation into active and engaging spaces to deliver accessible culture to the masses, using digital technologies for creating new paradigms of interaction and enhance the experience of the visitor. Here we present two case studies, whose purpose is to bring together the different competences by various experts to test the potential of digital products as non-formal teaching tools to allow a satisfying learning experience. The case explored are those of the Civic Museum of Schifanoia (Ferrara and the octagonal cloister of the Carracci in San Michele in Bosco (Bologna. The multimedia products discussed here relate to these two research themes, and up to now 3 out of 5 planned products have been made (in final mode, or in prototype form. The experimentation led to concrete results that introduced a reflection on what investigative methodologies and protocols are more suitable to be adopted in these cases, in compliance to the aim identified by the project.

  14. Case-control study on infant mortality in Southern Brazil

    Directory of Open Access Journals (Sweden)

    Mendes Karina Giane

    2006-01-01

    Full Text Available OBJECTIVE: To identify risk factors associated with infant mortality and, more specifically, with neonatal mortality. METHODS: A case-control study was carried out in the municipality of Caxias do Sul, Southern Brazil. Characteristics of prenatal care and causes of mortality were assessed for all live births in the 2001-2002 period with a completed live-birth certificate and whose mothers lived in the municipality. Cases were defined as all deaths within the first year of life. As controls, there were selected the two children born immediately after each case in the same hospital, who were of the same sex, and did not die within their first year of life. Multivariate analysis was performed using conditional logistic regression. RESULTS: There was a reduction in infant mortality, the greatest reduction was observed in the post-neonatal period. The variables gestational age (<36 weeks, birth weight (<2,500 g, and 5-minute Apgar (<6 remained in the final model of the multivariate analysis, after adjustment. CONCLUSIONS: Perinatal conditions comprise almost the totality of neonatal deaths, and the majority of deaths occur at delivery. The challenge for reducing infant mortality rate in the city is to reduce the mortality by perinatal conditions in the neonatal period.

  15. CO/sub 2/ formation damage study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Patton, J.T.

    1983-07-01

    The literature did provide insight into four possible damage mechanisms, namely: (1) precipitation of reservoir mineral in the vicinity around the producing well as carbon dioxide escapes from the water phase due to pressure draw down; (2) plugging of reservoir interstices by insoluble organic solids precipitated as the carbon dioxide dissolves in crude oil; (3) formation of an immobile gas phase, predominately CO/sub 2/, which would drastically lower the effective permeability to oil and, especially water; and (4) dissolution of cementation, especially carbonates or feldspars, that could allow fines to migrate in the reservoir and plug tiny flow passages. Each of these mechanisms was investigated in depth during the laboratory experiments. Occasional reports from industry suggested that the use of carbon dioxide to enhance the recovery of tertiary oil might be causing formation damage. This project was undertaken to define the mechanisms responsible for such occurrences. The objectives were threefold: (1) provide a comprehensive literature survey to elicit all that is currently known or suspected, relative to formation damage that might occur during the injection of carbon dioxide into an oil reservoir; (2) under simulated reservoir conditions, demonstrate in the laboratory each of the damage mechanisms and quantify the degree to which each mechanism could cause damage; and (3) for those damage mechanisms identified to be significant, develop a feasible remedy, easily applied in actual field operations. The third mechanism, related to the presence of an immobile gas phase, is a real problem but not unique to the injection of carbon dioxide. In the case of carbon dioxide, the damage should be self-correcting, as the solubility of carbon dioxide in water will eventually allow the water to dissolve away the gas and, hence, the blocking effect.

  16. Inertial confinement fusion reactor studies. Final report, 9 August 1982-31 December 1983

    International Nuclear Information System (INIS)

    The main output of this work is in the area of model development for cavity phenomena. Computer codes have been proposed and in some cases completed describing liquid metal condensation, ion beam propagation, and fireball development in ICF chambers. A brief description of the progress during the final phase of the contract is given

  17. Nuclear asphalt content gauge study. Research report (Final)

    International Nuclear Information System (INIS)

    This research ascertains if the Troxler Model 3241 Gauge could accurately determine the asphalt content of bituminous-concrete mixtures by nuclear means. The study was divided into three phases. Phase I was conducted in the Central Laboratory where a series of controlled tests were performed for variables that may effect the gauge's asphalt-content determinations. Phase II evolved into a cooperative study between the Maryland State Highway Administration (SHA) and several bituminous concrete producers. Phase III was to report the findings of the study and make a recommendation on the overall practical application of the gauge. The results indicate that the gauge can accurately determine asphalt contents on normal surface and base bituminous mixtures

  18. Os Trigonum Syndrome: A Case Study

    Directory of Open Access Journals (Sweden)

    Yasemin Turan

    2013-05-01

    Full Text Available Os trigonum syndrome is one of the rare causes of posterior foot pain. Ostrigonum, which is placed at the posterior of talus, is an accessory bone. Ostrigonum syndrome causes back foot pain due to compression between talusand calcaneus. In this study, we present a case of os trigonum syndrome ,which is a rare disease and is generally missed. A 65-year-old female patientwith a complaint of left foot pain for the last 2 months persented to our outpatientclinic. In the physical examination, plantar flexion of the ankle andtoe was painful. Patient’s pain was evaluated by the visual analog scale andnoted as 8 cm. There was sensitivity at the posterior of talus during palpation.Os trigonum syndrome was diagnosed based on radiological examinationsand a physical therapy program consisting of transcutaneous electrical nervestimulation (TENS, cold pack, foot and ankle range of motion and strengtheningexercises was started. After the treatment, pain VAS decreased to 2cm,and then the patient was followed clinically. As in our case, os trigonum syndromeshould also be taken into consideration in patients complaining withposterior foot pain apart from other frequently encountered causes. In suchcases, physical therapy programs are very effective in pain management andin reducing the cost of treatment. Turk J Phys Med Rehab 2013;59:161-4.

  19. Dark Energy Studies with LSST Image Simulations, Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, John Russell [Purdue Univ., West Lafayette, IN (United States)

    2016-07-26

    This grant funded the development and dissemination of the Photon Simulator (PhoSim) for the purpose of studying dark energy at high precision with the upcoming Large Synoptic Survey Telescope (LSST) astronomical survey. The work was in collaboration with the LSST Dark Energy Science Collaboration (DESC). Several detailed physics improvements were made in the optics, atmosphere, and sensor, a number of validation studies were performed, and a significant number of usability features were implemented. Future work in DESC will use PhoSim as the image simulation tool for data challenges used by the analysis groups.

  20. 32nd European Study Group with Industry, Final Report

    DEFF Research Database (Denmark)

    ESGI (European Study Group with Industry) is Europe's leading workshop for interaction between mathematicians and industry. These workshops have taken place in Great Britain for a number of years, going back to 1968 when Prof. Alan Tayler initiated the so-called Oxford Study Group with Industry...... mathematical expertise.Danfoss wanted a an analysis and optimization of a scroll compressor.DANISCO wanted a model for the heat and moisture transport in sugar silos.Danish Maritime Institute wanted to optimize a dynamical position system in order to keep a wessel stationary on the surface of the ocean...

  1. Mirror Fusion Test Facility data compression study. Final report

    International Nuclear Information System (INIS)

    This report is organized as follows. Discussions are given of three of the most important data compression methods that have been developed and studied over the years: coding, transforms, and redundancy reduction. (A brief discussion of how to combine and synthesize these ideas, and others, into a system is given). Specific ideas for compressing MFTF diagnostics and control data are developed. Listings and instructions for using FORTRAN programs that were compiled on the Livermore MFTF computers during the course of the study are also given

  2. APPLIED KNOWLEDGE MANAGEMENT IN SMALL DESIGN FIRMS: CASE STUDY

    Directory of Open Access Journals (Sweden)

    Christian Donin

    2016-09-01

    Full Text Available Knowledge is the new strategic imperative of organizations. The ability to manage knowledge is a crucial part of any organizations operational processes. The creation and diffusion of knowledge have become ever more important factors in competitiveness. This paper investigates the Knowledge Management and flow information and in small design firms. It is divided into three main parts. The first part of this paper describes the importance of Knowledge Management for organizations are described together with responsibilities needed to ensure successful Knowledge Management implementations and the Spiral of Organizational Knowledge Creation conception. The second part approaches literature available about process and organizational structure and information flow related to Brazilian design firms. Finally, this paper presents a case study of small design office of Civil Engineering identifying organizational process, verifying the types of communication practices and identifying the types of dynamic process of The Spiral of Organizational Knowledge Creation, KM strategy and dynamic through Knowledge Transfer.

  3. Gradual consolidation of synesthesia during adolescence: a case study

    DEFF Research Database (Denmark)

    Sørensen, Thomas Alrik; Nordfang, Maria; Ásgeirsson, Árni Gunnar

    2016-01-01

    modulated by expertise (Sørensen & Kyllingsbæk, 2012; Dall, Watanabe, & Sørensen, in review). Here we explore a case of a young female synesthete; AR (age 13), who presented an unusual, but consistent, color profile that allowed us to explore the effects of partial color encoding in synesthesia...... expertise related modulation between long-term colour-grapheme associations. To explore this hypothesis a follow-up screening of AR’s colour-grapheme associations revealed that a number of letters are still settling on their final colour association – colour changes that AR herself was unaware of, e.g. that......), visual priming (Mattingley, Rich, Yelland, & Bradshaw, 2001), and the Stroop task (Mills, Boteler, & Oliver, 1999). In a recent study Ásgeirsson, Nordfang, & Sørensen (2015) isolated specific components of attention that are modulated by synesthesia, and which seem to correspond to attentional changes...

  4. Evaluation of E-learning Platforms: a Case Study

    Directory of Open Access Journals (Sweden)

    Cristina POP

    2012-01-01

    Full Text Available In the recent past, a great number of e-learning platforms have been introduced on the market showing different characteristics and services. These platforms can be evaluated using multiple criteria and methods. This paper proposes a list of selected quality criteria for describing, characterizing and selecting e-learning platform. These criteria were designed based on e-learning standards. I also propose a mathematical model to determine the probability that a student uses an e-learning platform based on the factors (criteria that determine the quality of the platform and the socio-demographic variables of the student. The case study presented is an application of the model and the input data, intermediate calculations and final results were processed using SAS (Statistical Analysis Software.

  5. GLOBAL IMPACT OF SOLAR ENERGY, CASE STUDY - GERMANY

    Directory of Open Access Journals (Sweden)

    Gheorghe Caralicea Marculescu

    2014-02-01

    Full Text Available Renewable energy is a socially and politically defined category of energy sources. Renewable energy is generally defined as energy that comes from resources which are continually replenished on a human timescale such as sunlight, wind, rain, tides, waves and geothermal heat. About 16% of global final energy consumption comes from renewable resources, with 10% of all energy from traditional biomass, mainly used for heating, and 3.4% from hydroelectricity. New renewables (small hydro, modern biomass, wind, solar, geothermal, and biofuels accounted for another 3% and are growing rapidly. This paper seeks is aimed at presenting the impact solar energy could have on a world level given the finitude, reachability and ever increasing prices of fossil fuels. As a case study we will present the solar energy industry in Germany emphasizing the advantages and disadvantages this form of energy has in this country and worldwide.

  6. 1976-77 Internal Revenue Service Comparison Study. Final Report.

    Science.gov (United States)

    Applied Management Sciences, Inc., Silver Spring, MD.

    Application forms for the Basic Educational Opportunity Grant (BEOG) program for 1976-1977 were compared to 1975 tax forms filed with the Internal Revenue Service (IRS). Comparisons were also made to data from a similar 1974-1975 study. Based on a sample of 212,263 applicants, findings include the following: during 1976-1977, 70.7 percent of all…

  7. 1979-80 Internal Revenue Service Comparison Study. Final Report.

    Science.gov (United States)

    Applied Management Sciences, Inc., Silver Spring, MD.

    Application forms for the Basic Educational Opportunity Grant (BEOG) program for 1979-1980 were compared to 1978 tax forms filed with the Internal Revenue Service (IRS). Comparisons were also made to data from similar 1974-1975 and 1976-1977 studies. Based on a sample of 407,596 applicants, findings include the following: between 1976-1977 and…

  8. Psychological and Educational Studies with Spina Bifida Children. Final Report.

    Science.gov (United States)

    Diller, Leonard; And Others

    To measure school achievements in spina bifida children, to relate these measures to certain variables, to obtain information on educational problems, and to study facets of cognition and its changes with age, 77 spina bifida children and 53 amputees (all aged 5 to 15) were tested. Sixty non-disabled children were at times used for controls. The…

  9. Staging and storage facility feasibility study. Final report

    International Nuclear Information System (INIS)

    This study was performed to investigate the feasibility of adapting the design of the HWVP Canister Storage Building (CSB) to meet the needs of the WHC Spent Nuclear Fuel Project for Staging and Storage Facility (SSF), and to develop Rough Order of Magnitude (ROM) cost and schedule estimates

  10. (Studies of autoionizing states relevant to dielectronic recombination. Final report)

    International Nuclear Information System (INIS)

    Laser spectroscopy experiments on autoionizing states of alkaline earth atoms allow the inverse process, dielectronic recombination, to be studied in great detail under controlled and variable conditions. The research is also relevant to problems in physical chemistry involving excited molecules, and it has helped to clarify the physical processes of zero kinetic energy electron spectroscopy and coherent control

  11. Preliminary study Malaa. Final report; Foerstudie Malaa. Slutrapport

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Factors of importance for a possible localization of a deep nuclear waste repository at Malaa in northern Sweden are mapped in this study. The geologic structures in the area have been reviewed, mostly from already existing knowledge. Existing infrastructure and necessary improvements are discussed, as well as land use and environment, employment and other social effects. 47 refs, 41 figs, 8 tabs.

  12. Final Technical Report: Renewable Energy Feasibility Study and Resources Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Rivero, Mariah [BEC Environmental, Inc., Las Vegas, NV (United States)

    2016-02-28

    In March 2011, the U.S. Department of Energy (DOE) awarded White Pine County, Nevada, a grant to assess the feasibility of renewable resource-related economic development activities in the area. The grant project included a public outreach and training component and was to include a demonstration project; however, the demonstration project was not completed due to lack of identification of an entity willing to locate a project in White Pine County. White Pine County completed the assessment of renewable resources and a feasibility study on the potential for a renewable energy-focused economic sector within the County. The feasibility study concluded "all resources studied were present and in sufficient quantity and quality to warrant consideration for development" and there were varying degrees of potential economic impact based on the resource type and project size. The feasibility study and its components were to be used as tools to attract potential developers and other business ventures to the local market. White Pine County also marketed the County’s resources to the renewable energy business community in an effort to develop contracts for demonstration projects. The County also worked to develop partnerships with local educational institutions, including the White Pine County School District, conducted outreach and training for the local community.

  13. Study on Case-Based Fixture Design

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Fixture is an important manufacturing activity. A fixture design system based on case-based reasoning (CBR) is proposed in this paper. A new method of case representation on the basis of fixture function is presented, where the case representation is constituted of workpiece knowledge, processing feature knowledge, and fixture feature knowledge. Running the prototype system shows that the knowledge representation method, using cases, is a better way to transform and explain the design knowledge.

  14. Systems study of fuels from grains and grasses. Phase I. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Benson, W.; Allen, A.; Athey, R.; McElroy, A.; Davis, M.; Bennett, M.

    1978-02-24

    The program reported on herein consists of a first phase analysis of the potential for significant and economically viable contributions to U.S. energy needs from grasses and grains by the photosynthetic production of biomass. The study does not include other cultivated crops such as sugar cane, sugar beets, cotton, tobacco, vegetables, fruits, etc. The scope of the study encompasses grain crop residues, whole plant biomass from grain crops and nongrain crops on cropland, and whole plant biomass from grasses on pasture, rangeland, and federal range. The basic approach to the study involves first an assessment of current total biomass generation from the various grasses and grains on cropland, pasture, range, and federal range, and aggregating the production by combinations of crop residues and whole plant biomass; second, evaluation of possibilities for introduction of new crops and expanding production to marginal or presently idle land; third, development of proposed reasonable scenarios for actually harvesting biomass from selected combinations of crop residues, forages and hays, and new crops from land now in production, plus additional marginal or underutilized land brought into production; and finally, assessment on national and regional or local scales of the production that might be affected by reasonable scenarios. This latter effort includes analysis of tentative possibilities for reallocating priorities and needs with regard to production of grain for export or for livestock production. The overall program includes a case study analysis of production economics for a representative farm of about 1,000 acres (405 ha) located in Iowa.

  15. Logistics opportunity costs: A mining case study

    Directory of Open Access Journals (Sweden)

    Leani van Jaarsveld

    2013-05-01

    Full Text Available This study highlighted the importance of determining the impact that an ineffective mode of transport has on a firm’s transportation model and costs. The main focus of this study was to determine the logistics opportunity costs of using road transport within a mining firm. A case study approach was followed, as the investigation aimed to analyse a complex problem experienced by one company and present it in an easily understandable format. From the results of this study, it was apparent that the logistics opportunity costs associated with the mode of transport was substantial. This highlighted the need for firms to revise their choice of transport mode on a regular basis, as it has a major impact not only on their transportation costs, but also on their inventory holding and carbon emissions. The results also have implications for South Africa’s only freight railway, Transnet Freight Rail, which should not only focus on expanding its existing capacity, but also on improving its customer service delivery whilst containing tariff increases.

  16. Final report for CCS cross-layer reliability visioning study

    Energy Technology Data Exchange (ETDEWEB)

    Quinn, Heather M [Los Alamos National Laboratory; Dehon, Andre [U. PENN; Carter, Nicj [INTEL

    2010-12-20

    correct operation in spite of rare events, such as one high-threshold transistor in a billion or one erroneous gate evaluation in an hour of computation, cross-layer reliability schemes make reliability management a cooperative effort across the system stack, sharing information across layers so that they only expend energy on reliability when an error actually occurs. Figure 1 illustrates an example of such a system that uses a combination of information from the application and cheap architecture-level techniques to detect errors. When an error occurs, mechanisms at higher levels in the stack correct the error, efficiently delivering correct operation to the user in spite of errors at the device or circuit levels. In the realms of memory and communication, engineers have a long history of success in tolerating unpredictable effects such as fabrication variability, transient upsets, and lifetime wear using information sharing, limited redundancy, and cross-layer approaches that anticipate, accommodate, and suppress errors. Networks use a combination of hardware and software to guarantee end-toend correctness. Error-detection and correction codes use additional information to correct the most common errors, single-bit transmission errors. When errors occur that cannot be corrected by these codes, the network protocol requests re-transmission of one or more packets until the correct data is received. Similarly, computer memory systems exploit a cross-layer division of labor to achieve high performance with modest hardware. Rather than demanding that hardware alone provide the virtual memory abstraction, software page-fault and TLB-miss handlers allow a modest piece of hardware, the TLB, to handle the common-case operations on a cyc1e-by-cycle basis while infrequent misses are handled in system software. Unfortunately, mitigating logic errors is not as simple or as well researched as memory or communication systems. This lack of understanding has led to very expensive

  17. Obsessional Slowness in College Students: Case Studies

    Science.gov (United States)

    Johnson, Aleta

    2014-01-01

    Cases of obsessional slowness, a variant of obsessive compulsive disorder, have been documented in case literature regarding relatively low functioning populations. However, obsessional slowness can also present in higher functioning populations, including college and graduate students, as illustrated here by three case examples from a competitive…

  18. VHTR engineering design study: intermediate heat exchanger program. Final report

    International Nuclear Information System (INIS)

    The work reported is the result of a follow-on program to earlier Very High Temperature Reactor (VHTR) studies. The primary use of the VHTR is to provide heat for various industrial processes, such as hydrocarbon reforming and coal gasification. For many processes the use of an intermediate heat transfer barrier between the reactor coolant and the process is desirable; for some processes it is mandatory. Various intermediate heat exchanger (IHX) concepts for the VHTR were investigated with respect to safety, cost, and engineering design considerations. The reference processes chosen were steam-hydrocarbon reforming, with emphasis on the chemical heat pipe, and steam gasification of coal. The study investigates the critically important area of heat transfer between the reactor coolant, helium, and the various chemical processes

  19. Photovoltaic module electrical termination design requirement study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Mosna, F.J. Jr.; Donlinger, J.

    1980-07-01

    Motorola Inc., in conjunction with ITT Cannon, has conducted a study to develop information to facilitate the selection of existing, commercial, electrical termination hardware for photovoltaic modules and arrays. Details of the study are presented in this volume. Module and array design parameters were investigated and recommendations were developed for use in surveying, evaluating, and comparing electrical termination hardware. Electrical termination selection criteria factors were developed and applied to nine generic termination types in each of the four application sectors. Remote, residential, intermediate and industrial. Existing terminations best suited for photovoltaic modules and arrays were identified. Cost information was developed to identify cost drivers and/or requirements which might lead to cost reductions. The general conclusion is that there is no single generic termination that is best suited for photovoltaic application, but that the appropriate termination is strongly dependent upon the module construction and its support structure as well as the specific application sector.

  20. VHTR engineering design study: intermediate heat exchanger program. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1976-11-01

    The work reported is the result of a follow-on program to earlier Very High Temperature Reactor (VHTR) studies. The primary use of the VHTR is to provide heat for various industrial processes, such as hydrocarbon reforming and coal gasification. For many processes the use of an intermediate heat transfer barrier between the reactor coolant and the process is desirable; for some processes it is mandatory. Various intermediate heat exchanger (IHX) concepts for the VHTR were investigated with respect to safety, cost, and engineering design considerations. The reference processes chosen were steam-hydrocarbon reforming, with emphasis on the chemical heat pipe, and steam gasification of coal. The study investigates the critically important area of heat transfer between the reactor coolant, helium, and the various chemical processes.

  1. Unraveling phonological conspiracies: A case study.

    Science.gov (United States)

    Dinnsen, Daniel A; Gierut, Judith A; Morrisette, Michele L; Rose, Darcy E

    2014-01-01

    This paper focuses on three seemingly unrelated error patterns in the sound system of a child with a phonological delay, Child 218 (male, age 4 years 6 months) and ascribes those error patterns to a larger conspiracy to eliminate fricatives from the phonetic inventory. Employing Optimality Theory for its advantages in characterizing conspiracies, our analysis offers a unified account of the observed repairs. The contextual restrictions on those repairs are, moreover, attributed to early developmental prominence effects, which are independently manifested in another error pattern involving rhotic consonants. Comparisons are made with a published case study involving a different implementation of the same conspiracy, the intent being to disambiguate the force behind certain error patterns. The clinical implications of the account are also considered. PMID:25000372

  2. Telepractice for pediatric Dysphagia: a case study.

    Science.gov (United States)

    Malandraki, Georgia A; Roth, Melissa; Sheppard, Justine Joan

    2014-01-01

    A closed-ended intensive pediatric swallowing telepractice program was developed and piloted in one pediatric patient with Opitz BBB/G and Asperger's Syndromes, oropharyngeal dysphagia and aerophagia. The present study is a case report. Outcome variables included behavioral, swallowing and quality of life variables, and were assessed at baseline and at the end of the four-week program. Selective variables were also assessed at a follow-up family interview four weeks post program completion. Over the four-week intervention period, the patient demonstrated substantial improvements in: oral acceptance of eating-related objects and a variety of foods (behavioral variable), timing of voluntary saliva swallows and aerophagia levels (swallowing variables) and quality of life. Follow-up interview analysis showed that most skills were retained or improved one-month post intervention. This intensive telepractice program proved to be feasible and effective for this pediatric patient with dysphagia. PMID:25945217

  3. Telepractice for Pediatric Dysphagia: A Case Study

    Directory of Open Access Journals (Sweden)

    Georgia A. Malandraki

    2014-09-01

    Full Text Available A closed-ended intensive pediatric swallowing telepractice program was developed and piloted in one pediatric patient with Opitz BBB/G and Asperger’s Syndromes, oropharyngeal dysphagia and aerophagia. The present study is a case report. Outcome variables included behavioral, swallowing and quality of life variables, and were assessed at baseline and at the end of the four-week program. Selective variables were also assessed at a follow-up family interview four weeks post program completion. Over the four-week intervention period, the patient demonstrated substantial improvements in: oral acceptance of eating-related objects and a variety of foods (behavioral variable, timing of voluntary saliva swallows and aerophagia levels (swallowing variables and quality of life. Follow-up interview analysis showed that most skills were retained or improved one-month post intervention. This intensive telepractice program proved to be feasible and effective for this pediatric patient with dysphagia.

  4. Understanding Support - lessons from a case study

    Directory of Open Access Journals (Sweden)

    Chris Sauer

    1993-11-01

    Full Text Available Support from top management and others is agreed to be an important factor in information systems success and failure, but little is written about how it has its effect and how it might be managed to a project's advantage. A recently developed conceptual framework is described. It covers the nature and forms of support, the way support affects project outcomes, the bases on which support is provided, and the strategies by which support may be managed. The framework is used to analyse a case study in several stages. At the end of the analysis of each stage, the framework's utility is assessed in terms of its explanatory value and the practical advice it suggests. Areas for further research are identified.

  5. Unmasking Cleckley's psychopath: assessing historical case studies.

    Science.gov (United States)

    DeShong, Hilary L; Helle, Ashley C; Mullins-Sweatt, Stephanie N

    2016-05-01

    The current study investigated original case descriptions of psychopathy (Cleckley, 1941) in relation to current conceptualizations and general personality traits. Attorneys, forensic psychologists and clinical faculty members completed ratings of psychopathy and personality after reading vignettes based on Cleckley's descriptions of a psychopath. The results suggest that professionals' ratings are consistent with current conceptualizations of psychopathy. Furthermore, the five-factor model (FFM) personality traits of the vignettes aligned with the current literature on the FFM and psychopathy (i.e. low neuroticism, conscientiousness and agreeableness). The results further supported that a general trait model, like the FFM, may be well suited to describe the underlying personality traits of psychopathy. Gender differences were also examined. PMID:26931520

  6. Case studies of attacks on communication networks

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Sin Bok; Han, Eon Suk [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1996-06-15

    Recently, as the computer hardware and communications are developed, the data exchange through inter-networking has been highlighted and the data is being recognized as a great asset. Most of the organizations, businesses and enterprises are open to the external world-computer communication networks, attention must be focused on the securities of the information infrastructure. A government organization has been developing 'Circuits Analyzers', and 'Hacker-Tracking Program' and is struggling to track down sneakers. In this report, we analyze the contents of the cases where the communication network has been invaded, from the past up until now in Korea. This report also contains the result of a study on E-mail security, for the protection of KAERI Integrated Management Information System under which utilizes the CALS concepts and web services. (Author)

  7. The virtual information: a case study

    Directory of Open Access Journals (Sweden)

    Ginevra Gravili

    2012-09-01

    Full Text Available In todays economics, the fact that information is a major factor of production and of increasing importance as a source of competitive advantage is a generally accepted truism. The trend towards global markets has strongly impacted the competitive situation of many enterprises. Never has the economic environment been subject to so many drastic and rapid changes. This put new weight factors on the requirements for design of business process. This paper explores the case of an Italian legal office that has studied more and more innovative solutions both to satisfy the demands of the clienteles and to oppose the action of the new competitors. Comparing classic models and the theories of Porter with the characteristics and needs of new economy, it shows as the ability to possess, to easily have access, to creatively use of information constitutes one of the more strategic sources of the competitive advantage.

  8. Automated cardiopulmonary resuscitation: a case study.

    Science.gov (United States)

    Spiro, Jon; Theodosiou, Maria; Doshi, Sagar

    2014-02-01

    Rates of survival after cardiac arrest are low and correlate with the quality of cardiopulmonary resuscitation (CPR). Devices that deliver automated CPR (A-CPR) can provide sustained and effective chest compressions, which are especially useful during patient transfer and while simultaneous invasive procedures are being performed. The use of such devices can also release members of resuscitation teams for other work. This article presents a case study involving a man with acute myocardial infarction complicated by cardiogenic shock and pulmonary oedema. It describes how ED nursing and medical teams worked together to deliver A-CPR, discusses the use of A-CPR devices in a tertiary cardiac centre, and highlights the advantages of using such devices. PMID:24494769

  9. Robust control systems theory and case studies

    CERN Document Server

    Mackenroth, Uwe

    2004-01-01

    "Robust Control Systems" gives a self-contained introduction to modern Control Theory. It thus adds a textbook to the existing research-oriented literature on Robust Control. The author lays emphasis on the modern aspects of the design of controllers with prescribed performance and robustness properties. Different to the classical engineering approach, a rigorous mathematical treatment is essential for the full understanding and applicability of the modern methods such as H2 or H8 control or methods based on the structured singular value µ. Nevertheless, no prior knowledge of Control Theory is required as the classical fundamentals are introduced within the first few chapters. Subsequently a large part of the text provides elementary examples and industrial case studies, which are developed in full detail to show how modern methods can be applied to advanced problems. They make intensive use of MATLAB, especially the Control Systems Toolbox and the µ-Analysis and Synthesis Toolbox.

  10. Case studies of attacks on communication networks

    International Nuclear Information System (INIS)

    Recently, as the computer hardware and communications are developed, the data exchange through inter-networking has been highlighted and the data is being recognized as a great asset. Most of the organizations, businesses and enterprises are open to the external world-computer communication networks, attention must be focused on the securities of the information infrastructure. A government organization has been developing 'Circuits Analyzers', and 'Hacker-Tracking Program' and is struggling to track down sneakers. In this report, we analyze the contents of the cases where the communication network has been invaded, from the past up until now in Korea. This report also contains the result of a study on E-mail security, for the protection of KAERI Integrated Management Information System under which utilizes the CALS concepts and web services. (Author)

  11. Yakima River Spring Chinook Enhancement Study Appendices, 1991 Final Report.

    Energy Technology Data Exchange (ETDEWEB)

    Fast, David E.

    1991-05-01

    This document consists of the appendices for annual report DOE/BP/39461--9 which is summarized as follows. The population of Yakima River spring chinook salmon (Oncorhynchus tschawytscha) has been drastically reduced from historic levels reported to be as high as 250,000 adults (Smoker 1956). This reduction is the result of a series of problems including mainstem Columbia dams, dams within the Yakima itself, severely reduced flows due to irrigation diversions, outmigrant loss in irrigation canals, increased thermal and sediment loading, and overfishing. Despite these problems, the return of spring chinook to the Yakima River has continued at levels ranging from 854 to 9,442 adults since 1958. In October 1982, the Bonneville Power Administration contracted the Yakima Indian Nation to develop methods to increase production of spring chinook in the Yakima system. The Yakima Nation's current enhancement policy attempts to maintain the genetic integrity of the spring chinook stock native to the Yakima Basin. Relatively small numbers of hatchery fish have been released into the basin in past years. The goal of this study was to develop data that will be used to present management alternatives for Yakima River spring chinook. A major objective of this study is to determine the distribution, abundance and survival of wild Yakima River spring chinook. The second major objective of this study is to determine the relative effectiveness of different methods of hatchery supplementation. The last three major objectives of the study are to locate and define areas in the watershed that may be used for the rearing of spring chinook; to define strategies for enhancing natural production of spring chinook in the Yakima River; and to determine the physical and biological limitations on production within the system.

  12. Yakima River Spring Chinook Enhancement Study, 1991 Final Report.

    Energy Technology Data Exchange (ETDEWEB)

    Fast, David E.

    1991-05-01

    The population of Yakima River spring chinook salmon (Oncorhynchus tschawytscha) has been drastically reduced from historic levels reported to be as high as 250,000 adults (Smoker 1956). This reduction is the result of a series of problems including mainstem Columbia dams, dams within the Yakima itself, severely reduced flows due to irrigation diversions, outmigrant loss in irrigation canals, increased thermal and sediment loading, and overfishing. Despite these problems, the return of spring chinook to the Yakima River has continued at levels ranging from 854 to 9,442 adults since 1958. In October 1982, the Bonneville Power Administration contracted the Yakima Indian Nation to develop methods to increase production of spring chinook in the Yakima system. The Yakima Nation's current enhancement policy attempts to maintain the genetic integrity of the spring chinook stock native to the Yakima Basin. Relatively small numbers of hatchery fish have been released into the basin in past years. The goal of this study was to develop data that will be used to present management alternatives for Yakima River spring chinook. A major objective of this study is to determine the distribution, abundance and survival of wild Yakima River spring chinook. The second major objective of this study is to determine the relative effectiveness of different methods of hatchery supplementation. The last three major objectives of the study are to locate and define areas in the watershed that may be used for the rearing of spring chinook; to define strategies for enhancing natural production of spring chinook in the Yakima River; and to determine the physical and biological limitations on production within the system. 47 refs., 89 figs., 67 tabs.

  13. Commercial motor vehicle health and fatigue study : final report

    OpenAIRE

    Wiegand, Douglas M.; Hanowski, Richard J.; McDonald, Shelby E.

    2009-01-01

    Fatigue is a major risk factor in commercial motor vehicle operations, identified in naturalistic driving studies as a contributing factor in approximately 20 percent of safety-critical incidents. Understanding the nature of fatigued driving requires attention to several elements of the driving situation, including driver characteristics. The purpose of the present report is to explore driver body mass index (BMI) as a characteristic which may put one at increased risk for driving while fatig...

  14. Nuclear electric propulsion mission engineering study. Volume 2: Final report

    Science.gov (United States)

    1973-01-01

    Results of a mission engineering analysis of nuclear-thermionic electric propulsion spacecraft for unmanned interplanetary and geocentric missions are summarized. Critical technologies associated with the development of nuclear electric propulsion (NEP) are assessed, along with the impact of its availability on future space programs. Outer planet and comet rendezvous mission analysis, NEP stage design for geocentric and interplanetary missions, NEP system development cost and unit costs, and technology requirements for NEP stage development are studied.

  15. Aerosol analysis for the regional air pollution study. Final report

    International Nuclear Information System (INIS)

    The design and operation of an aerosol sampling and analysis program implemented during the 1975 to 1977 St. Louis Regional Air Pollution Study is described. A network of ten samplers were operated at selected sites in the St. Louis area and the total mass and elemental composition of the collected particulates were determined. Sampling periods of 2 to 24 hours were employed. The samplers were capable of collecting aerosol particles in two distinct size ranges corresponding to fine ( 2.4 μm diameter) particles. This unique feature allowed the separation of the particulate samples into two distinct fractions with differing chemical origins and health effects. The analysis methods were also newly developed for use in the St. Louis RAPS study. Total particulate mass was measured by a beta-particle attenuation method in which a precision of +- 5 μm/cm2 could be obtained in a one minute measurement time. Elemental compositions of the samples were determined using an energy dispersive x-ray fluorescence method in which detectable limits of 5 ng/cm2 or less were routinely achieved for elements ranging in atomic number from Al to Pb. The advantages of these analytical methods over more conventional techniques arise from the ability to automate the measurements. During the course of the two year study, a total of more than 35,000 individual samples were processed and a total of 28 concentrations measured for each sample

  16. Project on Alternative Systems Study - PASS. Final report

    International Nuclear Information System (INIS)

    Alternative repository systems for deep disposal of spent fuel and different types of canisters are studied regarding technical aspects in Project on Alternative System Study (PASS). The objective is to present a ranking of repository systems as well as of canister types for each system. The studies and compared systems are: KBS-3, Medium Long Tunnels (MLH), Long tunnels (VLH) and Deep Boreholes (VDH). For KBS-3 and MLH five canister types are compared (copper/steel, copper/lead, copper (HIP), steel/lead and steel), for VLH two types (copper/steel and steel), and for VDH three types (titanium/concrete with non-consolidated fuel assemblies, titanium/concrete with consolidated assemblies and copper (HIP) with non-consolidated assemblies). The comparison is separated into three sub-comparisons (Technology, Long-term performance and safety, and Costs), which eventually are merged into one ranking. With respect to canister alternatives the result is that the copper/steel canister is ranked first for KBS-3, MLH and VLH, while the titanium/concrete canister is ranked first for VDH (non-consolidated as well as consolidated assemblies. With these canister alternatives the merged ranking of repository systems results in placing KBS-3 slightly in front of MLH. VLH comes thereafter and VDH last. (32 refs.)

  17. Atomistic studies of grain boundaries and heterophase interfaces in alloys and compounds. Final report, July 1987-August 1998

    Energy Technology Data Exchange (ETDEWEB)

    Vitek, Vaclav

    1998-08-01

    The overarching goal of the research supported by this grant was investigation of the structure and properties of interfaces in multicomponent systems by atomistic modeling. Initially, the research was devoted to studies of segregation to grain boundaries in binary disordered alloys. The next step was then studies of the structure and properties of grain boundaries in ordered compounds, specifically Ni3Al and NiAl, and grain boundary segregation in these compounds in the case of off-stoichiometry. Finally, the structure of Nb/sapphire interfaces, in particular the core configurations of the misfit dislocations, was studied.

  18. NEXT GENERATION GAS TURBINE (NGGT) SYSTEMS STUDY; FINAL

    International Nuclear Information System (INIS)

    Building upon the 1999 AD Little Study, an expanded market analysis was performed by GE Power Systems in 2001 to quantify the potential demand for an NGGT product. This analysis concluded that improvements to the US energy situation might be best served in the near/mid term (2002-2009) by a ''Technology-Focused'' program rather than a specific ''Product-Focused'' program. Within this new program focus, GEPS performed a parametric screening study of options in the three broad candidate categories of gas turbines: aero-derivative, heavy duty, and a potential hybrid combining components of the other two categories. GEPS's goal was to determine the best candidate systems that could achieve the DOE PRDA expectations and GEPS's internal design criteria in the period specified for initial product introduction, circa 2005. Performance feasibility studies were conducted on candidate systems selected in the screening task, and critical technology areas were identified where further development would be required to meet the program goals. DOE PRDA operating parameters were found to be achievable by 2005 through evolutionary technology. As a result, the study was re-directed toward technology enhancements for interim product introductions and advanced/revolutionary technology for potential NGGT product configurations. Candidate technologies were identified, both evolutionary and revolutionary, with a potential for possible development products via growth step improvements. Benefits were analyzed from two perspectives: (1) What would be the attributes of the top candidate system assuming the relevant technologies were developed and available for an NGGT market opportunity in 2009/2010; and (2) What would be the expected level of public benefit, assuming relevant technologies were incorporated into existing new and current field products as they became available. Candidate systems incorporating these technologies were assessed as to how they could serve multiple applications

  19. A case study in value design

    OpenAIRE

    Sinclair, M.

    2003-01-01

    The design of a special type of valve gave rise to a problem which lead the mechanical engineers who designed the valve to call in the help of the author. The final solution to the problem may not be mathematically sophisticated (in fact, it may seem trivial to some readers), but the steps through which the design team struggled and the final approach which resulted in a practically feasible solution may be of interest to other practitioners.

  20. A case study in value design

    Directory of Open Access Journals (Sweden)

    M. Sinclair

    2003-12-01

    Full Text Available The design of a special type of valve gave rise to a problem which lead the mechanical engineers who designed the valve to call in the help of the author. The final solution to the problem may not be mathematically sophisticated (in fact, it may seem trivial to some readers, but the steps through which the design team struggled and the final approach which resulted in a practically feasible solution may be of interest to other practitioners.

  1. White phosphorus pits focused feasibility study final July 2007.

    Energy Technology Data Exchange (ETDEWEB)

    Davis, B.; Martino, L.

    2007-08-21

    The White Phosphorus Burning Pits (WPP) Area of Concern (AOC) is a site of about 5.5 acres (2.2 ha) located in the J-Field Study Area, in the Edgewood Area of Aberdeen Proving Ground (APG), Maryland (Figure 1.1). Considerable information about the WPP exists as a result of efforts to characterize the hazards associated with J-Field. Contamination in the J-Field Study Area was first detected during an environmental survey of the APG Edgewood Area conducted in 1977 and 1978 (Nemeth et al. 1983) by the U.S. Army Toxic and Hazardous Materials Agency (USATHAMA; predecessor to the U.S. Army Environmental Center). As part of a subsequent USATHAMA environmental survey, 11 wells were installed and sampled at J-Field (three of them at the WPP) (Nemeth 1989). Contamination was also detected in 1983 during a munitions disposal survey conducted by Princeton Aqua Science (1984). The Princeton Aqua Science investigation involved installing and sampling nine wells (four at the WPP) and collecting and analyzing surficial and deep composite soil samples (including samples from the WPP area). In 1986, the U.S. Environmental Protection Agency (EPA) issued a Resource Conservation and Recovery Act (RCRA) Permit (MD3-21-002-1355) requiring a post-wide RCRA Facility Assessment (RFA) and a hydrogeologic assessment of J-Field. In 1987, the U.S. Geological Survey (USGS) began a two-phase hydrogeologic assessment in which data were collected to model groundwater flow at J-Field. Soil-gas investigations were conducted, several well clusters were installed (four at the WPP), a groundwater flow model was developed, and groundwater and surface water monitoring programs were established that continue today. The results of the USGS study were published by Hughes (1993).

  2. Study for an energy prospective concerning the France. Final report

    International Nuclear Information System (INIS)

    This study aims to define two scenari in the energy prospective domain: a underlying scenario of reference at 2030 following a classical method, and a ''factor 4'' scenario following a more teleological method. In the first scenario the energy demand and the economical framework are presented and the following sectors discussed in terms of simulation and hypothesis for 2030: the industry, the transports, the residential sector and the ternary. The scenario is extrapolated to 2050. In the second scenario the main orientations and the framework are discussed with evaluation for the industry, the transports, the residential and the ternary sectors. The energy accounting for the France are also discussed. (A.L.B.)

  3. Mirror Advanced Reactor Study (MARS) final report summary

    International Nuclear Information System (INIS)

    The Mirror Advanced Reactor Study (MARS) has resulted in an overview of a first-generation tandem mirror reactor. The central cell fusion plasma is self-sustained by alpha heating (ignition), while electron-cyclotron resonance heating and negative ion beams maintain the electrostatic confining potentials in the end plugs. Plug injection power is reduced by the use of high-field choke coils and thermal barriers, concepts to be tested in the Tandem Mirror Experiment-Upgrade (TMX-U) and Mirror Fusion Test Facility (MFTF-B) at Lawrence Livermore National Laboratory

  4. Laser fusion systems design study. Final technical report

    International Nuclear Information System (INIS)

    This study investigated: (1) the formulation and evaluation of an alignment system to accomplish pointing, focusing, centering and translation for the 20-arm SHIVA laser, (2) the formulation and evaluation of concepts for the correction of static phase distortions introduced by the accumulated optical elements in the laser chains, (3) the formulation and evaluation of concepts for the correction of optical path length differences between the arms of the SHIVA system, and (4) the conceptual design of appropriate control system hardware. (U.S.)

  5. Coastal-inland solar radiation difference study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Bach, W.D. Jr.; Vukovich, F.M.

    1980-04-01

    The purpose of this study was to quantify the characteristics of solar insolation in the coastal zone and to determine the effect of the sea breeze circulation on the global insolation. In order to satisfy these objectives, a six station sampling network was established in the coastal plain of southeastern North Carolina, where previous evidence has indicated that the sea breeze circulation is almost a daily occurrence from late May through October. Three sites (Sloop Point, Onslow Beach, and Cape Fear Technical Institute (CFTI)) were located near the coast (coastal sites) to assess the insolation at the coast. A site (Clinton) was located in an area seldom affected by the sea breeze (about 100 km from the coast). Two additional sites, Wallace and Ellis Airport, located between the coastal sites and the control site, were to be used to assess the transient impact of the sea breeze upon the insolation. Pyranometers were located at each site to measure the global insolation. Direct normal insolation measured by a pyrheliometer and ultraviolet radiation measured by uv radiometers were observed at the Sloop Point and Clinton sites only. Data were collected during the calendar year 1978. The results of the study indicated that the global insolation had greater variability over the network during the summer season (June, July, and August). During the summer, there was a systematicdiurnal variation of the difference in global insolation between the inland and the coastal sites.

  6. Radioactivity studies: Final report, June 1985-August 1986

    International Nuclear Information System (INIS)

    We instigated studies of neptunium metabolism in two nonhuman primate species to derive dosimetric parameters necessary for accurate human radiation risk assessments. The metabolism of neptunium was studied in adult female baboons and tamarins following intravenous injection and intragastric intubation. Neptunium-237 and 239Np isotopes were prepared as citrate, nitrate, and bicarbonate complexs with valence states of +4, +5 and +6. Samples of blood, urine, feces and autopsy tissues were measured by both gamma-ray and alpha spectrometry techniques. Retention of injected neptunium was determined in vivo using whole and partial body gamma-scintillation spectroscopy. Immediately following intravenous injection, neptunium (+5 and +6) cleared rapidly from blood, deposited primarily in the skeleton (54 +- 5%) and liver (3 +- 1%), and was excreted predominately via urine (40 +- 3%). For the first year post injection, neptunium was retained with a composite biological half-time of 100 yrs in liver and 1.5 yrs in bone. In comparison, injected Np(+4) was retained in blood in higher concentrations and was eliminated initially via urine to a lesser extent (12%). Np(+4) was deposited primarily in the carcass (38 +- 4%) and liver (43 +- 4%). Differences in the chemical forms and radionuclide concentrations injected did not alter neptunium metabolic patterns. 78 refs., 20 figs., 30 tabs

  7. Plutonium disposition study phase 1b final report

    International Nuclear Information System (INIS)

    This report provides the results of the Westinghouse activities performed as part of the Plutonium Disposition Study Phase 1b. These activities, which took place from May 16, 1993 to September 15, 1993, build upon the work completed in Phase 1a, which concluded on May 15, 1993. In Phase 1a, three Plutonium Disposal Reactor (PDR) options were developed for the disposal of excess weapons grade plutonium from returned and dismantled nuclear weapons. This report documents the results of several tasks that were performed to further knowledge in specific areas leading up to Phase 2 of the PDR Study. The Westinghouse activities for Phase 1b are summarized as follows: (1) resolved technical issues concerning reactor physics including equilibrium cycle calculations, use of gadolinium, moderator temperature coefficient, and others as documented in Section 2.0; (2) analyzed large Westinghouse commercial plants for plutonium disposal; (3) reactor safety issues including the steam line break were resolved, and are included in Section 2.0; (4) several tasks related to the PDR Fuel Cycle were examined; (5) cost and deployment options were examined to determine optimal configuration for both plutonium disposal and tritium production; (6) response to questions from DOE and National Academy of Scientists (NAS) reviewers concerning the PDR Phase 1a report are included in Appendix A

  8. Bioenergetic and physiological studies of hyperthermophilic archaea. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Kelly, R.M.

    1999-03-01

    This project focuses on physiological and bioenergetic characteristics of two representative hyperthermophilic archaea: Thermococcus litoralis (T{sub opt} 88 C) and Pyrococcus furiosus (T{sub opt} 98 C). Both are obligately anaerobic heterotrophs which grow in the presence or absence of reducible sulfur compounds. T. litoralis was studied in relation to information previously developed for P. furiosus: effect of sulfur reduction on bioenergetics, preferred fermentation patterns, tungsten requirement, etc. A defined medium was developed for T. litoralis consisting of amino acids, vitamins and nucleotides. This serves as the basis for continuous culture studies probing metabolic response to media changes. P. furiosus and T. litoralis have also been found to produce a polysaccharide in the presence of maltose and yeast extract. The composition and chemical structure of this polysaccharide was investigated as well as the metabolic motivation for its production. A novel and, perhaps, primitive intracellular proteolytic complex (previously designated as protease S66) in P. furiosus was isolated and the gene encoding the subunit of the complex was cloned, sequenced and the protease expressed in active form in Eschericia coli. Among other issues, the role of this complex in protein turnover and stress response was examined in the context of this organism in addition to comparing it to other complexes in eubacterial and eukaryotic cells. Biochemical characteristics of the protease have been measured in addition to examining other proteolytic species in P. furiosus.

  9. Nuclear reactor system study for NASA/JPL. Final report

    International Nuclear Information System (INIS)

    Reactor shielding and safety studies and heat pipe development work undertaken for the Jet Propulsion Laboratory during the period March 1, 1981 to October 30, 1981 are described. Monte Carlo calculations of gamma and neutron shield configurations show that substantial weight penalties are incurred if exposures at 25 m to neutrons and gammas must be limited to 1012 nvt and 106 rad, instead of the 1013 nvt and 107 rad values used earlier. For a 1.6 MW/sub t/ reactor, the required shield weight increases from 400 to 815 kg. Water immersion criticality calculations have been extended to study the effect of water in fuel void spaces as well as in the core heat pipes. These show that the insertion into the core of eight blades of B4C with a mass totaling 2.5 kg will guarantee subcriticality. The design, fabrication procedure, and testing of a 4-m-long molybdenum/lithium heat pipe are described. It appears that an excess of oxygen in the wick prevented the attainment of expected performance capability

  10. Extraction studies. Final report, May 6, 1996--September 30, 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-10-09

    During the first week of this effort, an Alpkem RFA-300 4-channel automated chemical analyzer was transferred to the basement of building 42 at TA-46 for the purpose of performing extraction studies. Initially, this instrumentation was applied to soil samples known to contain DNA. Using the SFA (Segmented Flow Analysis) technique, several fluidic systems were evaluated to perform on-line filtration of several varieties of soil obtained from Cheryl Kuske and Kaysie Banton (TA-43, Bldg. 1). Progress reports were issued monthly beginning May 15, 1996. Early in 1997 there was a shift from the conventional 2-phase system (aqueous + air) to a 3-phase system (oil + aqueous + air) to drastically reduce sample size and reagent consumption. Computer animation was recorded on videotape for presentations. The time remaining on the subcontract was devoted to setting up existing equipment to incorporate the 3rd phase (a special fluorocarbon oil obtained from DuPont).

  11. 100 GHz, 1 MW, CW gyrotron study program. Final report

    International Nuclear Information System (INIS)

    The results of a study program to investigate the feasibility of various approaches in designing a 100 GHz, 1 MW CW gyrotron are presented. A summary is given of the possible configurations for a high average power, high frequency gyrotron, including an historical survey of experimental results which are relevant to the various approaches. A set of basic scaling considerations which enable qualitative comparisons between particular gyrotron interaction circuits is presented. These calculations are important in understanding the role of various electron beam and circuit parameters in achieving a viable gyrotron design. Following these scaling exercises, a series of design calculations is presented for a possible approach in achieving 100 GHz, 1 MW CW. These calculations include analyses of the electron gun and interaction circuit parts of the gyrotron, and a general analysis of other aspects of a high average power, high frequency gyrotron. Scalability of important aspects of the design to other frequencies is also discussed, as well as key technology issues

  12. Hycom Pre - Feasibility study. Final report[Hydrogen communities

    Energy Technology Data Exchange (ETDEWEB)

    Lacobazzi, A.; Mario, F di [ENEA, (Italy); Hasenauer, U. [Fraunhofer IS, (Germany); Joergensen, B.H.; Bromand Noergaard, P. [Risoe National Lab., (Denmark)

    2005-07-01

    The Quick-start Programme of the European Union Initiative for Growth identifies the hydrogen economy as one of the key areas for investment in the medium term (2004-2015). In this context the HyCOM (Hydrogen Communities) programme has been initiated. The main goal of this programme is the creation of a limited number of strategically sited stand-alone hydrogen communities producing hydrogen from various primary sources (mostly renewables) and using it for heat and electricity production and as fuel for vehicles. This report looks at the establishment of such hydrogen communities, analysing the main technical, economic, social, and environmental aspects as well as financial and regulatory barriers associated with the creation and operation of hydrogen communities. It also proposes a number of concepts for Hydrogen Communities and criteria with which a Hydrogen Community should be evaluated. The study is not in any way intended to be prescriptive. (ln)

  13. Laser fusion driven breeder design study. Final report

    International Nuclear Information System (INIS)

    The results of the Laser Fusion Breeder Design Study are given. This information primarily relates to the conceptual design of an inertial confinement fusion (ICF) breeder reactor (or fusion-fission hybrid) based upon the HYLIFE liquid metal wall protection concept developed at Lawrence Livermore National Laboratory. The blanket design for this breeder is optimized to both reduce fissions and maximize the production of fissile fuel for subsequent use in conventional light water reactors (LWRs). When the suppressed fission blanket is compared with its fast fission counterparts, a minimal fission rate in the blanket results in a unique reactor safety advantage for this concept with respect to reduced radioactive inventory and reduced fission product decay afterheat in the event of a loss-of-coolant-accident

  14. Blanket comparison and selection study. Final report. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    1984-09-01

    The study focused on: (1) Development of reference design guidelines, evaluation criteria, and a methodology for evaluating and ranking candidate blanket concepts. (2) Compilation of the required data base and development of a uniform systems analysis for comparison. (3) Development of conceptual designs for the comparative evaluation. (4) Evaluation of leading concepts for engineering feasibility, economic performance, and safety. (5) Identification and prioritization of R and D requirements for the leading blanket concepts. Sixteen concepts (nine TMR and seven tokamak) which were identified as leading candidates in the early phases of the study, were evaluated in detail. The overall evaluation concluded that the following concepts should provide the focus for the blanket R and D program: (Breeder/Coolant/Structure), Lithium/Lithium/Vanadium Alloy, Li/sub 2/O/Helium/Ferritic Steel, LiPb Alloy/LiPb Alloy/Vanadium Alloy, and Lithium/Helium/Ferritic Steel. The primary R and D issues for the Li/Li/V concept are the development of an advanced structural alloy, resolution of MHD and corrosion problems, provision for an inert atmosphere (e.g., N/sub 2/) in the reactor building, and the development of non-water cooled near-plasma components, particularly for the tokamak. The main issues for the LiPb/LiPb/V concept are similar to the Li/Li/V blanket with the addition of resolving the tritium recovery issue. The R and D issues for Li/sub 2/O/He/FS concept include resolution of the tritium recovery/containment issue, achieving adequate tritium breeding and resolving other solid breeder issues such as swelling and fabrication concerns. Major concerns for the Li/He/FS concept are related to its rather poor economic performance. Improvement of its economic performance will be somewhat concept-dependent and will be more of a systems engineering issue.

  15. Volcanism Studies: Final Report for the Yucca Mountain Project

    International Nuclear Information System (INIS)

    This report synthesizes the results of volcanism studies conducted by scientists at the Los Alamos National Laboratory and collaborating institutions on behalf of the Department of Energy's Yucca Mountain Project. An assessment of the risk of future volcanic activity is one of many site characterization studies that must be completed to evaluate the Yucca Mountain site for potential long-term storage of high-level radioactive waste. The presence of several basaltic volcanic centers in the Yucca Mountain region of Pliocene and Quaternary age indicates that there is a finite risk of a future volcanic event occurring during the 10,000-year isolation period of a potential repository. Chapter 1 introduces the volcanism issue for the Yucca Mountain site and provides the reader with an overview of the organization, content, and significant conclusions of this report. The risk of future basaltic volcanism is the primary topic of concern including both events that intersect a potential repository and events that occur near or within the waste isolation system of a repository. Future volcanic events cannot be predicted with certainty but instead are estimated using formal methods of probabilistic volcanic hazard assessment (PVHA). Chapter 2 describes the volcanic history of the Yucca Mountain region (YMR) and emphasizes the Pliocene and Quaternary volcanic record, the interval of primary concern for volcanic risk assessment. The distribution, eruptive history, and geochronology of Plio-Quaternary basalt centers are described by individual center emphasizing the younger postcaldera basalt ( than about 7 x 10-8 events yr-1 . Simple probability estimates are used to assess possible implications of not drilling aeromagnetic anomalies in the Amargosa Valley. The sensitivity of the disruption probability to the location of northeast boundaries of volcanic zones near the Yucca Mountain sit

  16. Blanket comparison and selection study. Final report. Volume 2

    International Nuclear Information System (INIS)

    The study focused on: (1) Development of reference design guidelines, evaluation criteria, and a methodology for evaluating and ranking candidate blanket concepts. (2) Compilation of the required data base and development of a uniform systems analysis for comparison. (3) Development of conceptual designs for the comparative evaluation. (4) Evaluation of leading concepts for engineering feasibility, economic performance, and safety. (5) Identification and prioritization of R and D requirements for the leading blanket concepts. Sixteen concepts (nine TMR and seven tokamak) which were identified as leading candidates in the early phases of the study, were evaluated in detail. The overall evaluation concluded that the following concepts should provide the focus for the blanket R and D program: (Breeder/Coolant/Structure), Lithium/Lithium/Vanadium Alloy, Li2O/Helium/Ferritic Steel, LiPb Alloy/LiPb Alloy/Vanadium Alloy, and Lithium/Helium/Ferritic Steel. The primary R and D issues for the Li/Li/V concept are the development of an advanced structural alloy, resolution of MHD and corrosion problems, provision for an inert atmosphere (e.g., N2) in the reactor building, and the development of non-water cooled near-plasma components, particularly for the tokamak. The main issues for the LiPb/LiPb/V concepts are similar to the Li/Li/V blanket with the addition of resolving the tritium recovery issue. The R and D issues for Li2O/He/FS concept include resolution of the tritium recovery/containment issue, achieving adequate tritium breeding and resolving other solid breeder issues such as swelling and fabrication concerns. Major concerns for the Li/He/FS concept are related to its rather poor economic performance. Improvement of its economic performance will be somewhat concept-dependent and will be more of a systems engineering issue

  17. Blanket comparison and selection study. Final report. Volume 1

    International Nuclear Information System (INIS)

    The study focused on: (1) Development of reference design guidelines, evaluation criteria, and a methodology for evaluating and ranking candidate blanket concepts. (2) Compilation of the required data base and development of a uniform systems analysis for comparison. (3) Development of conceptual designs for the comparative evaluation. (4) Evaluation of leading concepts for engineering feasibility, economic performance, and safety. (5) Identification and prioritization of R and D requirements for the leading blanket concepts. Sixteen concepts (nine TMR and seven tokamak) which were identified as leading candidates in the early phases of the study, were evaluated in detail. The overall evaluation concluded that the following concepts should provide the focus for the blanket R and D program: (Breeder/Coolant/Structure), Lithium/Lithium/Vanadium Alloy, Li2O/Helium/Ferritic Steel, LiPb Alloy/LiPb Alloy/Vanadium Alloy, and Lithium/Helium/Ferritic Steel. The primary R and D issues for the Li/Li/V concept are the development of an advanced structural alloy, resolution of MHD and corrosion problems, provision for an inert atmosphere (e.g., N2) in the reactor building, and the development of non-water cooled near-plasma components, particularly for the tokamak. The main issues for the LiPb/LiPb/V concept are similar to the Li/Li/V blanket with the addition of resolving the tritium recovery issue. The R and D issues for Li2O/He/FS concept include resolution of the tritium recovery/containment issue, achieving adequate tritium breeding and resolving other solid breeder issues such as swelling and fabrication concerns. Major concerns for the Li/He/FS concept are related to its rather poor economic performance. Improvement of its economic performance will be somewhat concept-dependent and will be more of a systems engineering issue

  18. Blanket comparison and selection study. Final report. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    1984-09-01

    The study focused on: (1) Development of reference design guidelines, evaluation criteria, and a methodology for evaluating and ranking candidate blanket concepts. (2) Compilation of the required data base and development of a uniform systems analysis for comparison. (3) Development of conceptual designs for the comparative evaluation. (4) Evaluation of leading concepts for engineering feasibility, economic performance, and safety. (5) Identification and prioritization of R and D requirements for the leading blanket concepts. Sixteen concepts (nine TMR and seven tokamak) which were identified as leading candidates in the early phases of the study, were evaluated in detail. The overall evaluation concluded that the following concepts should provide the focus for the blanket R and D program: (Breeder/Coolant/Structure), Lithium/Lithium/Vanadium Alloy, Li/sub 2/O/Helium/Ferritic Steel, LiPb Alloy/LiPb Alloy/Vanadium Alloy, and Lithium/Helium/Ferritic Steel. The primary R and D issues for the Li/Li/V concept are the development of an advanced structural alloy, resolution of MHD and corrosion problems, provision for an inert atmosphere (e.g., N/sub 2/) in the reactor building, and the development of non-water cooled near-plasma components, particularly for the tokamak. The main issues for the LiPb/LiPb/V concepts are similar to the Li/Li/V blanket with the addition of resolving the tritium recovery issue. The R and D issues for Li/sub 2/O/He/FS concept include resolution of the tritium recovery/containment issue, achieving adequate tritium breeding and resolving other solid breeder issues such as swelling and fabrication concerns. Major concerns for the Li/He/FS concept are related to its rather poor economic performance. Improvement of its economic performance will be somewhat concept-dependent and will be more of a systems engineering issue.

  19. Blanket comparison and selection study. Final report. Volume 3

    Energy Technology Data Exchange (ETDEWEB)

    1984-09-01

    The study focused on: (1) Development of reference design guidelines, evaluation criteria, and a methodology for evaluating and ranking candidate blanket concepts. (2) Compilation of the required data base and development of a uniform systems analysis for comparison. (3) Development of conceptual designs for the comparative evaluation. (4) Evaluation of leading concepts for engineering feasibility, economic performance, and safety. (5) Identification and prioritization of R and D requirements for the leading blanket concepts. Sixteen concepts (nine TMR and seven tokamak) which were identified as leading candidates in the early phases of the study, were evaluated in detail. The overall evaluation concluded that the following concepts should provide the focus for the blanket R and D program: (Breeder/Coolant/Structure), Lithium/Lithium/Vanadium Alloy, Li/sub 2/O/Helium/Ferritic Steel, LiPb Alloy/LiPb Alloy/Vanadium Alloy, and Lithium/Helium/Ferritic Steel. The primary R and D issues for the Li/Li/V concept are the development of an advanced structural alloy, resolution of MHD and corrosion problems, provision for an inert atmosphere (e.g., N/sub 2/) in the reactor building, and the development of non-water cooled near-plasma components, particularly for the tokamak. The main issues for the LiPb/LiPb/V concept are similar to the Li/Li/V blanket with the addition of resolving the tritium recovery issue. The R and D issues for Li/sub 2/O/He/FS concept include resolution of the tritium recovery/containment issue, achieving adequate tritium breeding and resolving other solid breeder issues such as swelling and fabrication concerns. Major concerns for the Li/He/FS concepts are related to its rather poor economic performance. Improvement of its economic performance will be somewhat concept-dependent and will be more of a systems engineering issue.

  20. Dedicated medical ion accelerator design study. Final report

    International Nuclear Information System (INIS)

    Results and conclusions are reported from a design study for a dedicated medical accelerator. Basing efforts on the current consensus regarding medical requirements, the resulting demands on accelerator and beam delivery systems were analyzed, and existing accelerator technology was reviewed to evaluate the feasibility of meeting these demands. This general analysis was augmented and verified by preparing detailed preliminary designs for sources of therapeutic beams of neutrons, protons and heavy ions. The study indicates that circular accelerators are the most desirable and economical solutions for such sources. Synchrotrons are clearly superior for beams of helium and heavier ions, while synchrotrons and cyclotrons seem equally well suited for protons although they have different strengths and weaknesses. Advanced techniques of beam delivery are of utmost importance in fully utilizing the advantages of particle beams. Several issues are invloved here. First, multi-treatment room arrangements are essential for making optimal use of the high dose rate capabilities of ion accelerators. The design of corresponding beam switching systems, the principles of which are already developed for physics experimental areas, pose no problems. Second, isocentric beam delivery substantially enhances flexibility of dose delivery. After several designs for such devices were completed, it was concluded that high field magnets are necessary to keep size, bulk and cost acceptable. Third, and most important, is the generation of large, homogeneous radiation fields. This is presently accomplished with the aid of scattering foils, occluding rings, collimators, ridge filters, and boluses. A novel approach, three-dimensional beam scanning, was developed here, and the most demanding components of such a system (fast-scanning magnet and power supply) were built and tested

  1. Blanket comparison and selection study. Final report. Volume 3

    International Nuclear Information System (INIS)

    The study focused on: (1) Development of reference design guidelines, evaluation criteria, and a methodology for evaluating and ranking candidate blanket concepts. (2) Compilation of the required data base and development of a uniform systems analysis for comparison. (3) Development of conceptual designs for the comparative evaluation. (4) Evaluation of leading concepts for engineering feasibility, economic performance, and safety. (5) Identification and prioritization of R and D requirements for the leading blanket concepts. Sixteen concepts (nine TMR and seven tokamak) which were identified as leading candidates in the early phases of the study, were evaluated in detail. The overall evaluation concluded that the following concepts should provide the focus for the blanket R and D program: (Breeder/Coolant/Structure), Lithium/Lithium/Vanadium Alloy, Li2O/Helium/Ferritic Steel, LiPb Alloy/LiPb Alloy/Vanadium Alloy, and Lithium/Helium/Ferritic Steel. The primary R and D issues for the Li/Li/V concept are the development of an advanced structural alloy, resolution of MHD and corrosion problems, provision for an inert atmosphere (e.g., N2) in the reactor building, and the development of non-water cooled near-plasma components, particularly for the tokamak. The main issues for the LiPb/LiPb/V concept are similar to the Li/Li/V blanket with the addition of resolving the tritium recovery issue. The R and D issues for Li2O/He/FS concept include resolution of the tritium recovery/containment issue, achieving adequate tritium breeding and resolving other solid breeder issues such as swelling and fabrication concerns. Major concerns for the Li/He/FS concepts are related to its rather poor economic performance. Improvement of its economic performance will be somewhat concept-dependent and will be more of a systems engineering issue

  2. Landslide Economics: Concepts and Case Studies

    Science.gov (United States)

    Klose, Martin; Damm, Bodo

    2015-04-01

    Landslide economics is vital for fundamental understanding of landslide risk as dealing with two important topics: (i) impact assessment, either as damage statistics or cost modeling, and (ii) vulnerability assessment, i.e., the study of exposure, sensitivity, and resilience to landslide damage, ideally from both sociotechnical and financial perspective (e.g., Crovelli and Coe, 2009; Wills et al., 2014). Many aspects addressed in landslide economics have direct influence on landslide risk, including: (i) human activity is often a major causative factor of landslides, not only by predisposing or triggering them, but also as a result of inadequate (low-cost) landslide mitigation; (ii) the level of tolerable or acceptable risk, a measure driving a large part of landslide costs in industrialized countries, is highly variable, differing between individuals, public or private organizations, and societies, with its nature being to change over time; and (iii) decision makers are faced with finding the right balance in landslide mitigation, thus need to weight diverse geological and socioeconomic factors that control its effectiveness in both technical and financial terms (e.g., Klose et al., 2014a). A large part of the complexity in assessing landslide risk as measured by economic costs is due to unique problems in understanding of (i) what types of landslide damage affect human activity and infrastructure in which way, (ii) how society contributes and responds to various kinds of damage, and (iii) how landslide damage is valued in monetary terms. Landslide economics shows the potential to take account of these sociocultural factors to the benefit of risk analysis (e.g., Klose et al., 2014b). The present contribution introduces local and regional case studies in which different economic issues of landslide risk are highlighted using the example of public infrastructures in NW Germany. A special focus is on the following topics: (i) risk culture and created risk, (ii

  3. Industrialization: Different Approaches and Case Studies Industrialization: Different Approaches and Case Studies

    OpenAIRE

    Keith Griffin

    1987-01-01

    Industrialization: Different Approaches and Case Studies This paper enquires whether an industrialisation policy designed by the state might be successful in achieving industrialisation and development in the third world. Three common approaches to industrialisation are analysed in terms of their structural features and consequences: import substitution, capital goods sector promotion, and manufacturing export promotion. Associating these strategies to Brazil, India and South Korea, respectiv...

  4. Case studies on age-management in organisations: report on organisational case studies

    NARCIS (Netherlands)

    Punte, E.; Conen, W.S.; Schippers, J.; Henkens, C.J.I.M.

    2011-01-01

    The acquisition of case studies was thwarted by the economic crisis and the feeling of being ‘over-researched’ by potential organisations. Although organisations in some sectors (e.g. chemical manufacturing) reported the worst part of the economic crisis was behind, many organisations indicated gett

  5. Case Study: The Mystery of the Seven Deaths--A Case Study in Cellular Respiration

    Science.gov (United States)

    Gazdik, Michaela

    2014-01-01

    Cellular respiration, the central component of cellular metabolism, can be a difficult concept for many students to fully understand. In this interrupted, problem-based case study, students explore the purpose of cellular respiration as they play the role of medical examiner, analyzing autopsy evidence to determine the mysterious cause of death…

  6. Determinants of the Final Size and Case Rate of Nosocomial Outbreaks.

    Directory of Open Access Journals (Sweden)

    Amy Hurford

    Full Text Available Different nosocomial pathogen species have varying infectivity and durations of infectiousness, while the transmission route determines the contact rate between pathogens and susceptible patients. To determine if the pathogen species and transmission route affects the size and spread of outbreaks, we perform a meta-analysis that examines data from 933 outbreaks of hospital-acquired infection representing 14 pathogen species and 8 transmission routes. We find that the mean number of cases in an outbreak is best predicted by the pathogen species and the mean number of cases per day is best predicted by the species-transmission route combination. Our fitted model predicts the largest mean number of cases for Salmonella outbreaks (22.3 and the smallest mean number of cases for Streptococci outbreaks (8.5. The largest mean number of cases per day occurs during Salmonella outbreaks spread via the environment (0.33 and the smallest occurs for Legionella outbreaks spread by multiple transmission routes (0.005. When combined with information on the frequency of outbreaks these findings could inform the design of infection control policies in hospitals.

  7. High temperature facility for atomic physics studies. Final report

    International Nuclear Information System (INIS)

    The results of a program designed to develop a laser heated plasma sample for atomic physics studies in the 30 to 100 eV range of electron temperature and the 3 x 1017 to 1018 cm-3 range in electron density are presented. The approach used was discussed in detail in Mathematical Sciences Northwest, Inc., (MSNW) Proposal 1660, that is, the laser breakdown mode of heating in a slow solenoid. An extensive rework of the plasma sample facility was done in order to use this mode of heating. Specifically, a new solenoid magnet was constructed to allow higher field operation and the plasma chamber was modified to allow the use of puff filling orifices and small bore tube liners. The vacuum system and focussing optics were changed to allow the use of an on-axis Cassagranian system capable of focussing the laser radiation to a nearly diffraction limited spot as is necessary when heating through a small aperture. The 10 liter CO2 laser optics were charged to an unstable oscillator configuration and additional windows were provided into the optical cavity for alignment purposes

  8. Barrow Black Carbon Source and Impact Study Final Campaign Report

    Energy Technology Data Exchange (ETDEWEB)

    Barrett, Tate [Baylor Univ., Waco, TX (United States)

    2014-07-01

    The goal of the Barrow Black Carbon Source and Impact (BBCSI) Study was to characterize the concentration and isotopic composition of carbonaceous atmospheric particulate matter (PM) at the Atmospheric Radiation Measurement site in Barrow, AK. The carbonaceous component was characterized via measurement of the organic and black carbon (OC and BC) components of the total PM. To facilitate complete characterization of the particulate matter, filter-based collections were used, including a medium volume PM2.5 sampler and a high volume PM10 sampler. Thirty-eight fine (PM2.5) and 49 coarse (PM10) particulate matter fractions were collected at weekly and bi-monthly intervals. The PM2.5 sampler operated with minimal maintenance during the 12 month campaign. The PM10 sampler used for the BBCSI used standard Tisch hi-vol motors which have a known lifetime of ~1 month under constant use; this necessitated monthly maintenance and it is suggested that the motors be upgraded to industrial blowers for future deployment in the Arctic. The BBCSI sampling campaign successfully collected and archived 87 ambient atmospheric particulate matter samples from Barrow, AK from July 2012 to June 2013. Preliminary analysis of the organic and black carbon concentrations has been completed. This campaign confirmed known trends of high BC lasting from the winter through to spring haze periods and low BC concentrations in the summer.

  9. Revised CTUIR Renewable Energy Feasibility Study Final Report

    Energy Technology Data Exchange (ETDEWEB)

    John Cox; Thomas Bailor; Theodore Repasky; Lisa Breckenridge

    2005-10-31

    This preliminary assessment of renewable energy resources on the Umatilla Indian Reservation (UIR) has been performed by CTUIR Department of Science and Engineering (DOSE). This analysis focused primarily identifying renewable resources that may be applied on or near the Umatilla Indian Reservation. In addition preliminary technical and economic feasibility of developing renewable energy resources have been prepared and initial land use planning issues identified. Renewable energies examined in the course of the investigation included solar thermal, solar photovoltaic, wind, bioethanol, bio-diesel and bio-pellet fuel. All renewable energy options studied were found to have some potential for the CTUIR. These renewable energy options are environmentally friendly, sustainable, and compliment many of the policy goals of the CTUIR. This report seeks to provide an overall review of renewable energy technologies and applications. It tries to identify existing projects near to the CTUIR and the efforts of the federal government, state government and the private sector in the renewable energy arena. It seeks to provide an understanding of the CTUIR as an energy entity. This report intends to provide general information to assist tribal leadership in making decisions related to energy, specifically renewable energy deve lopment.

  10. Final report of experimental studies on siphon breaker

    International Nuclear Information System (INIS)

    Experimental studies on siphon breaker are a research reactor. Most research reactors are required to be contained in the enormous pool for a safety aspect. Because it is necessary to keep the reactor pool water level during normal operation, a pool water service system is designed to supply demineralized water. The water supply is automatically controlled by opening or closing a valve installed on the system with a signal. If the pool water loss is greater than the pool water make-up capacity and the pool level continues to drop, other system pumps or heaters should be stopped. For preventing to drop the pool water level above the reactor core, all system should be located above the core. However, a component of a system can be installed below the core level due to the component purpose. Then, the system should install a siphon breaker to cover the reactor core with pool water and to protect from a siphon leak of the reactor pool water during and after all postulated initiating events. The purpose of this research is to determine the siphon break type according to the research reactor types for designing the siphon breaker

  11. Studies of Transport Properties of Fractures: Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Stephen R. Brown

    2006-06-30

    We proposed to study several key factors controlling the character and evolution of fracture system permeability and transport processes. We suggest that due to surface roughness and the consequent channeling in single fractures and in fracture intersections, the tendency of a fracture system to plug up, remain permeable, or for permeability to increase due to chemical dissolution/precipitation conditions will depend strongly on the instantaneous flow channel geometry. This geometry will change as chemical interaction occurs, thus changing the permeability through time. To test this hypothesis and advance further understanding toward a predictive capability, we endeavored to physically model and analyze several configurations of flow and transport of inert and chemically active fluids through channels in single fractures and through fracture intersections. This was an integrated program utilizing quantitative observations of fractures and veins in drill core, quantitative and visual observations of flow and chemical dissolution and precipitation within replicas of real rough-walled fractures and fracture intersections, and numerical modeling via lattice Boltzmann methods.

  12. Anticipatory precrash restraint sensor feasibility study: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Kercel, S.W.; Dress, W.B.

    1995-08-01

    This report explores feasibility of an anticipatory precrash restraint sensor. The foundation principle is the anticipation mechanism found at a primitive level of biological intelligence and originally formalized by the mathematical biologist Robert Rosen. A system based on formal anticipatory principles should significantly outperform conventional technologies. It offers the prospect of high payoff in prevention of death and injury. Sensors and processes are available to provide a good, fast, and inexpensive description of the present dynamical state of the vehicle to the embedded system model in the anticipation engine. The experimental part of this study found that inexpensive radar in a real-world setting does return useful data on target dynamics. The data produced by a radar system can be converted to target dynamical information by good, fast and inexpensive signal-processing techniques. Not only is the anticipatory sensor feasible, but further development under the sponsorship of the National Highway Traffic Safety Administration is necessary and desirable. There are a number of possible lines of follow-on investigation. The level of effort and expected benefits of various alternatives are discussed.

  13. RETROSPECTIVE STUDY OF 861 CASES OF ENDOSCOPIC ENDONASAL DCR: OUR EXPERIENCE

    OpenAIRE

    Mahajan,, S.; Priya; James,, Alan L; Girija; Mayur; Paresh; Anshuman; Kapil

    2014-01-01

    AIM: To focus on difficulties in endoscopic endonasal DCR, to improve the final outcome of endoscopic endonasal DCR. To elaborate the steps this will avoid recurrence. MATERIAL AND METHODS: This article presents retrospective study of 861 cases that underwent Endoscopic endonasal DCR between Oct 2004 and Nov 2011. The patients operated were in the age group from 5 years to 94 years. The cases of lacrimal abscesses were tackled by endo DCR which gave a substantial advantage over the convention...

  14. Knowledge management and cognitive theory: An African case study

    Directory of Open Access Journals (Sweden)

    A. Misch

    2006-12-01

    Full Text Available Purpose: The aim of this paper is to report on research into whether knowledge can be managed more effectively by taking into consideration the nature and complexity of information being received by members of an organisation; the cognitive abilities of those members; and finally the nature and composition of the hierarchical structure of the organisation within which those members operate. Design/Methodology/Approach: The research reported on in this paper was carried out using a case study approach, with the focus on a single organisation to which the authors had special access. Data was gathered using a combination of interviews and a focus group, with participants drawn from a cross-section of members of the case study organisation. Analysis was conducted within the framework associated with the primary theoretical model (Jaques & Clement, 1991 that underpins this research. Findings: This research helps to further an understanding of how individual and organisational performance may be influenced by issues such as cognitive processes and the relationship to information complexity. The research findings support the work of Jaques and Clement (1991. Implications: This research had important implications for the organisation in the case study investigation. Other organisations would need to evaluate the research findings in terms of their applicability to other organisations in the same industry, in the same country (South Africa or elsewhere in other industries or in other countries on the African continent. Originality/Value: This research is original in terms of the application of cognitive theory in conjunction with knowledge management principles in the context of the legal profession in South Africa. It has potential value in many other industries and countries.

  15. Volcanism Studies: Final Report for the Yucca Mountain Project

    Energy Technology Data Exchange (ETDEWEB)

    Bruce M. Crowe; Frank V. Perry; Greg A. Valentine; Lynn M. Bowker

    1998-12-01

    This report synthesizes the results of volcanism studies conducted by scientists at the Los Alamos National Laboratory and collaborating institutions on behalf of the Department of Energy's Yucca Mountain Project. An assessment of the risk of future volcanic activity is one of many site characterization studies that must be completed to evaluate the Yucca Mountain site for potential long-term storage of high-level radioactive waste. The presence of several basaltic volcanic centers in the Yucca Mountain region of Pliocene and Quaternary age indicates that there is a finite risk of a future volcanic event occurring during the 10,000-year isolation period of a potential repository. Chapter 1 introduces the volcanism issue for the Yucca Mountain site and provides the reader with an overview of the organization, content, and significant conclusions of this report. The risk of future basaltic volcanism is the primary topic of concern including both events that intersect a potential repository and events that occur near or within the waste isolation system of a repository. Future volcanic events cannot be predicted with certainty but instead are estimated using formal methods of probabilistic volcanic hazard assessment (PVHA). Chapter 2 describes the volcanic history of the Yucca Mountain region (YMR) and emphasizes the Pliocene and Quaternary volcanic record, the interval of primary concern for volcanic risk assessment. The distribution, eruptive history, and geochronology of Plio-Quaternary basalt centers are described by individual center emphasizing the younger postcaldera basalt (<5 Ma). The Lathrop Wells volcanic center is described in detail because it is the youngest basalt center in the YMR. The age of the Lathrop Wells center is now confidently determined to be about 75 thousand years old. Chapter 3 describes the tectonic setting of the YMR and presents and assesses the significance of multiple alternative tectonic models. The Crater Flat volcanic zone is

  16. Master plan study - District heating Sillamaee municipality. Estonia. Final report

    International Nuclear Information System (INIS)

    The main deficiencies of the district heating system in Sillamae (Estonia) were identified as being inefficiency of the heat and power production plant, which has a very low capacity, lack of means for consumers to control their energy consumption due to the existing constant flow system, pollution from heat and power production based on oil shale, water and heat losses from the network and unclear agreements between the Silmet factory and Sillamae municipality. The available capital for funding is limited. It was investigated where in the system investments would have the greatest effect. A scenario where heat is supplied from individual gas-fired boilers was calculated. A financially viable scenario would be to change from cogeneration of heat and power (CHP) based on oil shale to either individual natural gas supply or peat-fueled heat production. The Sillamae municipality and the Estonian government should agree on a solution for Sillamae. There will be a cash flow problem if the project is implemented. This can be partly solved by introducing a longer loan period. it is expected that there will be no substantial changes in the consumers' heat demand in the 'do nothing'scenario, and in other scenarios ca. 520 Tj/p.a. from the Solmet factory, 530 Tj/p.a. from the town and 260 Tj/p.a. as heat losses, totaling 1310 Tj/p.a.. In another scenario - the introduction of natural gas - the town's heat demand will be 530 Tj/p.a. and there will be no heat losses. More detailed studies of environmental impacts should be undertaken

  17. Barrow Black Carbon Source and Impact Study Final Campaign Report

    Energy Technology Data Exchange (ETDEWEB)

    Barrett, Tate

    2014-07-01

    The goal of the Barrow Black Carbon Source and Impact campaign was to characterize the concentration and isotopic composition of carbonaceous atmospheric particulate matter (PM) at the Atmospheric Radiation Measurement (ARM) Climate Research Facility site in Barrow, Alaska. The carbonaceous component was characterized by measuring the organic and black carbon (OC and BC) components of the total PM. To facilitate complete characterization of the PM, filter-based collections were used, including a medium volume PM2.5 sampler and a high volume PM10 sampler. Thirty-eight fine PM fractions (PM2.5) and 49 coarse (PM10) PM fractions were collected at weekly and bi-monthly intervals. The PM2.5 sampler operated with minimal maintenance during the 12 month campaign. The PM10 sampler used for the Barrow Black Carbon Source and Impact (BBCSI) study used standard Tisch “hi-vol” motors that have a known lifetime of approximately 1 month under constant use; this necessitated monthly maintenance, and it is suggested that, for future deployment in the Arctic, the motors be upgraded to industrial blowers. The BBCSI sampling campaign successfully collected and archived 87 ambient atmospheric PM samples from Barrow, Alaska, from July 2012 to June 2013. Preliminary analysis of the OC and BC concentrations has been completed. This campaign confirmed known trends of high BC lasting from the winter through to spring haze periods and low BC concentrations in the summer. However, the annual OC concentrations had a very different seasonal pattern with the highest concentrations during the summer, lowest concentrations during the fall, and increased concentrations during the winter and spring (Figure 1).

  18. Geologic study of Kettle dome, northeast Washington. Final report

    International Nuclear Information System (INIS)

    This geologic study of Kettle dome, northeast Washington, encompasses an area of approximately 800 square miles (2048 sq km). The evaluation of uranium occurrences associated with the igneous and metamorphic rocks of the dome and the determination of the relationship between uranium mineralization and stratigraphic, structural, and metamorphic features of the dome are the principal objectives. Evaluation of the validity of a gneiss dome model is a specific objective. The principal sources of data are detailed geologic mapping, surface radiometric surveys, and chemical analyses of rock samples. Uranium mineralization is directly related to the presence of pegmatite dikes and sills in biotite gneiss and amphibolite. Other characteristics of the uranium occurrences include the associated migmatization and high-grade metamorphism of wallrock adjacent to the pegmatite and the abrupt decrease in uranium mineralization at the pegmatite-gneiss contact. Subtle chemical characteristics found in mineralized pegmatites include: (1) U increase as K2O increases, (2) U decreases as Na2O increases, and (3) U increases as CaO increases at CaO values above 3.8%. The concentration of uranium occurrences in biotite gneiss and amphibolite units results from the preferential intrusion of pegmitites into these well-foliated rocks. Structural zones of weakness along dome margins permit intrusive and migmatitic activity to affect higher structural levels of the dome complex. As a result, uranium mineralization is localized along dome margins. The uranium occurrences in the Kettle dome area are classified as pegmatitic. Sufficient geologic similarities exist between Kettle dome and the Rossing uranium deposit to propose the existence of economic uranium targets within Kettle dome

  19. Antineutrino reactor safeguards - a case study

    CERN Document Server

    Christensen, Eric; Jaffke, Patrick

    2013-01-01

    Antineutrinos have been proposed as a means of reactor safeguards for more than 30 years and there has been impressive experimental progress in neutrino detection. In this paper we conduct, for the first time, a case study of the application of antineutrino safeguards to a real-world scenario - the North Korean nuclear crisis in 1994. We derive detection limits to a partial or full core discharge in 1989 based on actual IAEA safeguards access and find that two independent methods would have yielded positive evidence for a second core with very high confidence. To generalize our results, we provide detailed estimates for the sensitivity to the plutonium content of various types of reactors, including most types of plutonium production reactors, based on detailed reactor simulations. A key finding of this study is that a wide class of reactors with a thermal power of less than 0.1-1 GWth can be safeguarded achieving IAEA goals for quantitative sensitivity and timeliness with detectors right outside the reactor ...

  20. Odontoma: a retrospective study of 73 cases

    Energy Technology Data Exchange (ETDEWEB)

    An, Seo Young; An, Chang Hyeon; Choi, Karp Shik [School of Dentistry, Kyungpook National University, Daegu (Korea, Republic of)

    2012-06-15

    The purpose of the present study was to retrospectively evaluate the clinical findings and treatment results for impacted permanent teeth associated with odontomas. We retrospectively investigated 73 odontomas in 72 patients who visited Kyungpook National University Dental Hospital from April 2004 through November 2011. The study was performed using medical records, panoramic radiographs, and pathological reports. Data gathered included age, gender, location, chief complaints, effects on dentition, and treatment of odontoma and the impacted tooth associated with odontoma. Most compound odontomas (46.7%) were found in the second decade and complex odontomas were not related to age. Odontomas showed no gender predilection. Fifty-five cases (75.3%) of odontomas were detected on routine dental radiographs. Sixty percent of compound odontomas occurred in the canine area and 57.1% of complex odontomas in the molar areas. Impaction of permanent teeth (61.6%) was the most common complication on the adjacent teeth. Most odontomas (84.9%) were removed surgically and impacted permanent teeth were managed by surgical removal (53.2%), orthodontic treatment (25.5%), or surgical repositioning (6.4%). There was a statistically significant relation between age and preservation of the impacted permanent teeth associated with odontomas (p<0.01). Early detection and treatment of odontomas increase the possibility of preservation of the impacted tooth. Therefore, it would be suggested that periodic panoramic examination during the first and second decade of life might be beneficial for the early detection and better prognosis of odontomas.

  1. Tactile Astronomy - a Portuguese case study

    Science.gov (United States)

    Canas, L.; Alves, F.; Correia, A.

    2012-09-01

    Although astronomy plays an important role in the most various outreach initiatives, as well as school science curricula, due to its strong visual component in knowledge acquisition, astronomy subjects are not entirely well addressed and accessed by visually impaired students and/or general public. This stresses the need of more tactile material production, still very scarce in an educational context whether formal or informal. This is a case study activity developed based on different schematic tactile images of several objects present in our solar system. These images in relief, highlight, through touch, several relevant features present in the different astronomical objects studied. The scientific knowledge is apprehended through the use of a tactile key, complemented with additional information. Through proper hands-on activities implementation and careful analysis of the outcome, the adapted images associated with an explanatory key prove to be a valuable resource in tactile astronomy domain. Here we describe the process of implementing such initiative near visually impaired students. The struggles and challenges perceived by all involved and the enrichment experience of engaging astronomy with visually impaired audiences, broadening horizons in an overall experience accessible to all.

  2. Odontoma: a retrospective study of 73 cases

    International Nuclear Information System (INIS)

    The purpose of the present study was to retrospectively evaluate the clinical findings and treatment results for impacted permanent teeth associated with odontomas. We retrospectively investigated 73 odontomas in 72 patients who visited Kyungpook National University Dental Hospital from April 2004 through November 2011. The study was performed using medical records, panoramic radiographs, and pathological reports. Data gathered included age, gender, location, chief complaints, effects on dentition, and treatment of odontoma and the impacted tooth associated with odontoma. Most compound odontomas (46.7%) were found in the second decade and complex odontomas were not related to age. Odontomas showed no gender predilection. Fifty-five cases (75.3%) of odontomas were detected on routine dental radiographs. Sixty percent of compound odontomas occurred in the canine area and 57.1% of complex odontomas in the molar areas. Impaction of permanent teeth (61.6%) was the most common complication on the adjacent teeth. Most odontomas (84.9%) were removed surgically and impacted permanent teeth were managed by surgical removal (53.2%), orthodontic treatment (25.5%), or surgical repositioning (6.4%). There was a statistically significant relation between age and preservation of the impacted permanent teeth associated with odontomas (p<0.01). Early detection and treatment of odontomas increase the possibility of preservation of the impacted tooth. Therefore, it would be suggested that periodic panoramic examination during the first and second decade of life might be beneficial for the early detection and better prognosis of odontomas.

  3. Anorexia in the Adolescence - case study

    Directory of Open Access Journals (Sweden)

    Almeida de Paiva, Maria O

    2010-07-01

    Full Text Available Eating disorders lead to special biological and psychological states. The result of the total lack of food is treated in a distinct way by anorexia. Nutritionists have thus had difficulty in coming to an agreement on the best therapy to prevent such disorders. First it is essential to understand which treatment aims are and then to attempt to know how the several treatment models used nowadays can reach those aims. Someone who suffers from eating disorders, together with an inner deformation, suffers from too much sensitiveness. In order to solve these problems, one needs a change in the relationship with oneself, with the others and with the world. This study presents a teenager’s case study – Anorexia. Is, in fact, a problem that society faces and can’t ignore. Many youngsters have already died and others are following their steps. But there are also those ones that succeeded in overcoming the problem and now are reporting their stories.

  4. BOOK REVIEW: Case Studies in Knowledge Management

    Directory of Open Access Journals (Sweden)

    Reviewed by Dr. Adnan BOYACI

    2005-10-01

    Full Text Available 161Case Studies in Knowledge ManagementEdited by Murray JennexHersley: PA: Idea Group, 2005, pp. 372, ISBN 1-59140-352-9Reviewed by Dr. Adnan BOYACIAnadolu UniversityEskişehir-TurkeyKnowledge management (KM as a structured system and the way to the effectiveness isrelatively new field for the contemporary organizations functioning in different andcompetitive domain of public and private sectors in terms of getting optimal effectivenessunderlined by the concepts such as quality, productivity…etc. Because of the growingimportance and the popularity of the KM either as a research topic or specialized coursesubject, a crucial need for understanding, conceptualization and implementation of KM asa system has emerged since the mid 1990’s. In this sense, the book contributes criticallyto fill the gap between theory and implementation as a teaching material.This edited book is published by Idea Group Publishing. The book has twenty chaptersdivided into seven sections. In addition to a section of authors’ biography contributing thebook and an index, there is a preface that the basic terms and key concepts underliningthe cases discussed following chapters, which is explained in a schematized way.Besides the editor, total of 47 authors have contributed to the book. These authors arefrom different countries, academic backgrounds, and institutions. Although approximatelyone third of the authors are from USA, the rest of the authors are from Canada, England,Austria, Germany, Australia, New Zealand, Egypt, Bahrain and China. The authorsrepresent a variety of universities, private companies, and military institutions. Most ofthem have strong professional backgrounds, which help them address the issues bothfrom theoretical and practical perspectives. Contributions of authors having differentbackgrounds and institutions enable the book to have very comprehensive spectrum andthis makes the book attractive practically for those working different sectors

  5. Clinical Study on Acute Pancreatitis in Pregnancy in 26 Cases

    OpenAIRE

    Cheng Qihui; Zhang Xiping; Ding Xianfeng

    2012-01-01

    Aim. This paper investigated the pathogenesis and treatment strategies of acute pancreatitis (AP) in pregnancy. Methods. We analyzed retrospectively the characteristics, auxiliary diagnosis, treatment strategies, and clinical outcomes of 26 cases of patients with AP in pregnancy. Results. All patients were cured finally. (1) Nine cases of 22 mild acute pancreatitis (MAP) patients selected automatic termination of pregnancy because of the unsatisfied therapeutic efficacy or those patients' req...

  6. SUSTAINABLE DEVELOPMENT – AN IMPERATIVE OF INDUSTRIAL COMPANIES. CASE STUDY: COCA-COLA HBC ROMANIA

    Directory of Open Access Journals (Sweden)

    Catalin POPESCU

    2015-06-01

    Full Text Available The paper begins with a summary of the concept, emphasizing that sustainable development is a strongly supported policy around the world. The case study examines specific aspects of sustainable development in Coca-Cola HBC Romania. Finally it presents the main obstacles and opportunities identified for adoption by Romanian companies in their business of sustainable competitiveness strategies.

  7. Guidelines for Conducting Positivist Case Study Research in Information Systems

    Directory of Open Access Journals (Sweden)

    Graeme Shanks

    2002-11-01

    Full Text Available The case study research approach is widely used in a number of different ways within the information systems community. This paper focuses on positivist, deductive case study research in information systems. It provides clear definitions of important concepts in positivist case study research and illustrates these with an example research study. A critical analysis of the conduct and outcomes of two recently published positivist case studies is reported. One is a multiple case study that validated concepts in a framework for viewpoint development in requirements definition. The other is a single case study that examined the role of social enablers in enterprise resource planning systems implementation. A number of guidelines for successfully undertaking positivist case study research are identified including developing a clear understanding of key concepts and assumptions within the positivist paradigm; providing clear and unambiguous definitions of the units and interactions when using any theory; carefully defining the boundary of the theory used in the case study; using hypotheses rather than propositions in the empirical testing of theory; using fuzzy or probabilistic propositions in recognising that reality can never be perfectly known; selecting case studies carefully, particularly single case studies; and recognising that generalisation from positivist, single case studies is inherently different from generalisation from single experiments. When properly undertaken, positivist, deductive case study research is a valuable research approach for information systems researchers, particularly when used within pluralist research programs that use a number of different research approaches from different paradigms.

  8. Quantifying Wetland Functions: A Case Study

    Science.gov (United States)

    Potter, K. W.; Rogers, J. S.; Hoffman, A. R.; Wu, C.; Hoopes, J. A.; Armstrong, D. E.

    2007-05-01

    Wetlands are reputed to reduce peak flows and improve water quality by trapping sediment and phosphorus. However, there are relatively few studies that quantify these wetland functions. This paper reports on a study of a 45-hectare wetland in southern Wisconsin. The wetland is traversed by a stream channel that drains a predominantly agricultural 17.4 km2 watershed. During the spring and summer of 2006, we collected stage data and water samples at stations upstream and downstream of the wetland, with the former accounting for 82% of the contributing area. Continuous measurements of water stage at these stations were used to construct a streamflow record. During storm events water samples were taken automatically at 2-hour intervals for the first 12 samples and 8-hour intervals for the next 12 samples. Samples were analyzed for total suspended solids, total phosphorus, and dissolved reactive phosphorus. Ten events were observed during the observation period; the two largest events were 1 to 2-year storms. One-dimensional unsteady flow routing was used to estimate the maximum extent of wetland inundation for each event. When normalized for flow volume, all peak flows were attenuated by the wetland, with the maximum attenuation corresponding to the intermediate events. The reduced attenuation of the larger events appears to be due to filling of storage, either due to antecedent conditions or the event itself. In the case of sediment, the amount leaving the wetland in the two largest storms, which accounted for 96% of the exported sediment during the period of observation, was twice the amount entering the wetland. The failure of the wetland to trap sediment is apparently due to the role of drainage ditches, which trap sediment during the wetland-filling phase and release it during drainage. The export of sediment during the largest events appears to result from remobilization of sediment deposited in the low-gradient stream channel during smaller events. This

  9. Case Study: Camptocormia, a Rare Conversion Disorder.

    Science.gov (United States)

    Rajmohan, Velayudhan; Thomas, Biju; Sreekumar, Kumaran

    2004-01-01

    Camptocormia is a condition characterized by severe frontal flexion of the spinal cord and knees, with passive drooping of both arms. It occurs as a form of conversion disorder. Some cases are associated with behavioral problems. A case of camptocormia of 2-year duration in a south Indian adolescent girl with oppositional defiant disorder and…

  10. Case Study Research in Software Engineering Guidelines and Examples

    CERN Document Server

    Runeson, Per; Rainer, Austen; Regnell, Bjorn

    2012-01-01

    Based on their own experiences of in-depth case studies of software projects in international corporations, in this book the authors present detailed practical guidelines on the preparation, conduct, design and reporting of case studies of software engineering.  This is the first software engineering specific book on the case study research method.

  11. STUDY OF MATERNAL AND PERINATAL OUTCOME IN REFERRED OBSTETRICS CASES

    OpenAIRE

    Umesh; Alka Murlidhar

    2015-01-01

    OBJECTIVE: To review the referred obstetric cases for reason of referral and to study the maternal and perinatal outcome. DESIGN: Prospective Observational study . STUDY POPULATION: 380 cases referred from periphery to tertiary care institute in one year duration. METHODS: INCLUSION C RITERIA : All referred ANC cases to our tertiary care i...

  12. A molecular-genetic approach to studying source-sink interactions in Arabidopsis thalian. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Gibson, S. I.

    2000-06-01

    This is a final report describing the results of the research funded by the DOE Energy Biosciences Program grant entitled ''A Molecular-Genetic Approach to Studying Source-Sink Interactions in Arabidiopsis thaliana''.

  13. Jazz improvisers’ shared understanding: A case study

    Directory of Open Access Journals (Sweden)

    Michael F. Schober

    2014-08-01

    Full Text Available To what extent and in what arenas do collaborating musicians need to understand what they are doing in the same way? Two experienced jazz musicians who had never previously played together played three improvisations on a jazz standard (It Could Happen to You on either side of a visual barrier. They were then immediately interviewed separately about the performances, their musical intentions, and their judgments of their partner’s musical intentions, both from memory and prompted with the audiorecordings of the performances. Statements from both (audiorecorded interviews as well as statements from an expert listener were extracted and anonymized. Two months later, the performers listened to the recordings and rated the extent to which they endorsed each statement. Performers endorsed statements they themselves had generated more often than statements by their performing partner and the expert listener; their overall level of agreement with each other was greater than chance but moderate to low, with disagreements about the quality of one of the performances and about who was responsible for it. The quality of the performances combined with the disparities in agreement suggest that, at least in this case study, fully shared understanding of what happened is not essential for successful improvisation. The fact that the performers endorsed an expert listener’s statements more than their partner’s argues against a simple notion that performers’ interpretations are always privileged relative to an outsider’s.

  14. Environmental injustice: case studies from the South

    Science.gov (United States)

    Cifuentes, Enrique; Frumkin, Howard

    2007-10-01

    We selected three case studies to illustrate environmental injustice issues in the South. These examples relate to migrant agricultural workers, the maquiladora industry and artisanal mining, while reviewing some of the major mechanisms involved, e.g. multinational corporations, the development of free trade zones, multilateral free trade agreements and the export of hazards. A series of strategies are discussed in order to address environmental injustice and health disparities that exist on a global scale. Some of the recommendations involve policy initiatives; others, such as research and mentorship, fall within the traditional domain of public health practice. In this paper, special attention is given to concerned environmental and occupational health professionals using evidence-based data for advocacy. For lasting changes to be made, however, stronger institutions and legislation are required. Those who have the 'right to know' about environmental injustice issues include communities of concern, workers' representatives and lawyers. Government officials and company officials may eventually work on the basis of conflict resolution, compensation and remediation, to quote some examples. Systematic approaches to protect both the environment and public health must be updated.

  15. VINCRISTINE INDUCED NEUROTOXICITY: STUDY OF 75 CASES

    Directory of Open Access Journals (Sweden)

    M.T. Arzanian

    2009-08-01

    Full Text Available ObjectiveConcern for side-effects of therapy related to treatment of childhood malignancies is becoming an increasingly important topic. In this study, we evaluated extent of vincristine (VCR induced neurotoxicity in a group of children who underwent chemotherapy, with VCR being part of the regimen.Materials & MethodsIn this investigation, for 75 children (54% boys, 46% girls, aged between 1 to 14 (mean 6.5±4.3 years, serial weekly neurological examinations were performed; of the 75, 70 had acute lymphoblastic leukemia and 5 Wilm's tumor. All patients were on a chemotherapy protocol of at least 4 consecutive VCR (1.5mg/m2 injections.ResultsDecreased deep tendons reflexes were seen in the Achilles reflex in 78%, and the patellar reflex in 53% of patients. Muscle weakness was found in 70% of patients, being mild in 76% of them. Four  percent of patients showed severe weakness. Petosis, jaw pain, hoarseness, abdominal pain and constipation were seen in 15%, 6%, 12%, 12% and 12% respectively. Paresthesia was observed in 32 of 52 patients, over 4 years old. No cases of foot drop, urinary retention or facial nerve palsy were seen in this patient group.ConclusionChildren on usual doses of vincristine regimen may have neuropathic side effects but most of these side effects are mild and not troublesome.Key words: Vincristine, neuropathy, neurotoxicity, side effect

  16. High Penetration Photovoltaic Case Study Report

    Energy Technology Data Exchange (ETDEWEB)

    Bank, J.; Mather, B.; Keller, J.; Coddington, M.

    2013-01-01

    Technical concerns with integrating higher penetrations of photovoltaic (PV) systems include grid stability, voltage regulation, power quality (voltage rise, sags, flicker, and frequency fluctuations), and protection and coordination. The current utility grid was designed to accommodate power flows from the central generation source to the transmission system and eventually to the distribution feeders. At the distribution level, the system was designed to carry power from the substation toward the load. Renewable distributed generation, particularly solar PV, provides power at the distribution level challenging this classical paradigm. As these resources become more commonplace the nature of the distribution network and its operation is changing to handle power flow in both directions. This report is focused on large PV installations in which penetration is significantly greater than 15% of maximum daytime feeder load. These case studies are intended to demonstrate success stories with integration of large PV plants at the distribution level as well as some of the solutions used by the utility to ensure safe, reliable operation of both the PV system and the distribution network.

  17. Hybrid Risk Management Methodology: A Case Study

    Directory of Open Access Journals (Sweden)

    Jacky Siu-Lun Ting

    2009-10-01

    Full Text Available Risk management is a decision-making process involving considerations of political, social, economic and engineering factors with relevant risk assessments relating to a potential hazard. In the last decade, a number of risk management tools are introduced and employed to manage and minimize the uncertainty and threats realization to the organizations. However, the focus of these methodologies are different; in which companies need to adopt various risk management principles to visualize a full picture of the organizational risk level. Regarding to this, this paper presents a new approach of risk management that integrates Hierarchical Holographic Modeling (HHM, Enterprise Risk Management (ERM and Business Recovery Planning (BCP for identifying and assessing risks as well as managing the consequences of realized residual risks. To illustrate the procedures of the proposed methodology, a logistic company ABC Limited is chosen to serve as a case study Through applying HHM and ERM to investigate and assess the risk, ABC Limited can be better evaluated the potential risks and then took the responsive actions (e.g. BCP to handle the risks and crisis in near future.

  18. Dynamic optimization case studies in DYNOPT tool

    Science.gov (United States)

    Ozana, Stepan; Pies, Martin; Docekal, Tomas

    2016-06-01

    Dynamic programming is typically applied to optimization problems. As the analytical solutions are generally very difficult, chosen software tools are used widely. These software packages are often third-party products bound for standard simulation software tools on the market. As typical examples of such tools, TOMLAB and DYNOPT could be effectively applied for solution of problems of dynamic programming. DYNOPT will be presented in this paper due to its licensing policy (free product under GPL) and simplicity of use. DYNOPT is a set of MATLAB functions for determination of optimal control trajectory by given description of the process, the cost to be minimized, subject to equality and inequality constraints, using orthogonal collocation on finite elements method. The actual optimal control problem is solved by complete parameterization both the control and the state profile vector. It is assumed, that the optimized dynamic model may be described by a set of ordinary differential equations (ODEs) or differential-algebraic equations (DAEs). This collection of functions extends the capability of the MATLAB Optimization Tool-box. The paper will introduce use of DYNOPT in the field of dynamic optimization problems by means of case studies regarding chosen laboratory physical educational models.

  19. Comparative economic analysis: Anaerobic digester case study

    International Nuclear Information System (INIS)

    An economic guide is developed to assess the value of anaerobic digesters used on dairy farms. Two varieties of anaerobic digesters, a conventional mixed-tank mesophilic and an innovative earthen psychrophilic, are comparatively evaluated using a cost-effectiveness index. The two case study examples are also evaluated using three other investment merit statistics: simple payback period, net present value, and internal rate of return. Life-cycle savings are estimated for both varieties, with sensitivities considered for investment risk. The conclusion is that an earthen psychrophilic digester can have a significant economic advantage over a mixed-tank mesophilic digester because of lower capital cost and reduced operation and maintenance expenses. Because of this economic advantage, additional projects are being conducted in North Carolina to increase the rate of biogas utilization. The initial step includes using biogas for milk cooling at the dairy farm where the existing psychrophilic digester is located. Further, a new project is being initiated for electricity production with thermal reclaim at a swine operation

  20. Jazz improvisers' shared understanding: a case study.

    Science.gov (United States)

    Schober, Michael F; Spiro, Neta

    2014-01-01

    To what extent and in what arenas do collaborating musicians need to understand what they are doing in the same way? Two experienced jazz musicians who had never previously played together played three improvisations on a jazz standard ("It Could Happen to You") on either side of a visual barrier. They were then immediately interviewed separately about the performances, their musical intentions, and their judgments of their partner's musical intentions, both from memory and prompted with the audiorecordings of the performances. Statements from both (audiorecorded) interviews as well as statements from an expert listener were extracted and anonymized. Two months later, the performers listened to the recordings and rated the extent to which they endorsed each statement. Performers endorsed statements they themselves had generated more often than statements by their performing partner and the expert listener; their overall level of agreement with each other was greater than chance but moderate to low, with disagreements about the quality of one of the performances and about who was responsible for it. The quality of the performances combined with the disparities in agreement suggest that, at least in this case study, fully shared understanding of what happened is not essential for successful improvisation. The fact that the performers endorsed an expert listener's statements more than their partner's argues against a simple notion that performers' interpretations are always privileged relative to an outsider's. PMID:25152740

  1. Refugee Problem in Europe – Case Studies

    Directory of Open Access Journals (Sweden)

    Esztella Varga

    2015-11-01

    Full Text Available The European refugee problem has grown dramatically in the last few months, putting a considerable amount of pressure on the European countries. Not only are they facing migrants from North Africa, but from the Middle East as well.In March 2011 the Arab Spring has reached Syria, causing a huge number of Syrians to flee their country and seek asylum in Turkey, and possibly going further to the EU. The refugees who fled Syria as well as those who are leaving North Africa (mostly the failed state of Libya are aiming to reach European soil, but Italy, Greece or Turkey is not ready to handle the amount of refugees. The cooperation of the Mediterranean countries and Europe has not been able to slow down the flow of refugees, and the Mediterranean and Aegean seas have become dangerous routes for the desperate migrants who attempt the sea-crossing. In my analysis I would like to highlight the role of the so-called elements of ‘soft power’ in the way of dealing with the refugee problem. According to my hypothesis, the issue can’t be successfully addressed using only the means of the ‘soft power’. No real solution for the crisis has been offered yet, and I would like to give case studies of the different ways of dealing with the problem – inside (Greece, Italy and outside (Turkey of the European Union.

  2. Environmental injustice: case studies from the South

    International Nuclear Information System (INIS)

    We selected three case studies to illustrate environmental injustice issues in the South. These examples relate to migrant agricultural workers, the maquiladora industry and artisanal mining, while reviewing some of the major mechanisms involved, e.g. multinational corporations, the development of free trade zones, multilateral free trade agreements and the export of hazards. A series of strategies are discussed in order to address environmental injustice and health disparities that exist on a global scale. Some of the recommendations involve policy initiatives; others, such as research and mentorship, fall within the traditional domain of public health practice. In this paper, special attention is given to concerned environmental and occupational health professionals using evidence-based data for advocacy. For lasting changes to be made, however, stronger institutions and legislation are required. Those who have the 'right to know' about environmental injustice issues include communities of concern, workers' representatives and lawyers. Government officials and company officials may eventually work on the basis of conflict resolution, compensation and remediation, to quote some examples. Systematic approaches to protect both the environment and public health must be updated

  3. PHYSICAL THERAPY TREATMENT ON ATHLETES WITH MUSCLE RUPTURE (CASE STUDY

    Directory of Open Access Journals (Sweden)

    Balteanu Veronica

    2014-12-01

    Full Text Available This paper aims to analyze the means and possibilities of recovery and reintegration in sport trauma preceding the muscle, muscle rupture. Theoretical concepts are presented on the topic, therapeutic conduit - physical recovery -specific trauma, applied in individual treatment and the results obtained from assessments and of the case study analysis. Hypothesis - "Early kinetic treatment applied through use, specific and nonspecific, and appropriate methodology leads to full recovery of athletes subjected to a muscular injury". The purpose of this paper is to present a program of early physical therapy and the application using appropriate means of diagnosis, stage and individual particularitiesof sport, for full recovery of athletes who suffered a muscle injury, without risk of relapse. Results and discussion. Following the hypothesis, by having performed the therapy program; significant differences were found between the initial and final results of the evaluation, to all interested parameters. Conclusions. The recovery allowed the reintegration in sport performance of the athlete and readaptation for competitive requirements without reducing sports performance. The period of immobilization, being short and segmentary, in this case helped to reduce the time needed for recovery.

  4. A qualitative study of final-year medical students' perspectives of general practitioners' competencies

    OpenAIRE

    Björn Landström; Bengt Mattsson; Rudebeck, Carl E.

    2011-01-01

    Objectives: To investigate final-year medical students' perspectives of general practitioners' competencies. A further aim of the study was to investigate which type of clinical problems is properly managed by GPs according to students. Methods: We conducted a qualitative study of 49 final year medical students from two programmes. Reflective writing statements were used to collect data. Qualitative content analysis was employed to analyse data. Results: Three themes were identified to explai...

  5. Evaluations of Regional Competitiveness: Making a Case for Case Studies

    OpenAIRE

    Barkley, David L.

    2008-01-01

    This paper provides an overview of the concepts of regional competitiveness, including definitions, conceptual models, measurements, and the benefits and shortcomings of following a strategy to enhance competitiveness. Next, city-region rankings and indices of competitiveness are reviewed and the usefulness of these studies is summarized. Potential roles for regional scientists for improving (1) evaluations of regional competitiveness and (2) applications of evaluations to regional developmen...

  6. Cases for the Net Generation: An Empirical Examination of Students' Attitude toward Multimedia Case Studies

    Science.gov (United States)

    Sheppard, Michael; Vibert, Conor

    2016-01-01

    Case studies have been an important tool in business, legal, and medical education for generations of students. Traditional text-based cases tend to be self-contained and structured in such a way as to teach a particular concept. The multimedia cases introduced in this study feature unscripted web-hosted video interviews with business owners and…

  7. Enrique: A case study of a gifted computer user

    Energy Technology Data Exchange (ETDEWEB)

    Sesko, S C

    2000-03-17

    The author has been investigating the affective and intellectual views that gifted children have about computers. These studies have used various methodological approaches in order to develop a broad perspective on the issues involved in this topic. The author has used survey instruments (Sesko, 1998) and interview techniques (Sesko, 1999) to capture both statistical and narrative data. The objective of this study is to explore in depth the interactions that one student has with the machine and its applications. The driver for this and the previous studies was the paucity of research in the area of gifted and talented children and their involvement with what has become the primary intellectual tool of the century (Turkel, 1984). The second reason is that it has been posited that the intellectual characteristics of gifted children should enable those who are interested in computers to achieve a high level of proficiency with either computer applications or programming. Further, the ability to learn things at a young age should allow gifted children who use computers to develop a large variety of computer-based activities. The author has shown evidence to support these ideas in previous work. Finally, as Hausman (1985) claims, facilities with computers should allow these children to create new activities for using computers. The author found no published research to demonstrate whether they do; but still believes the results of this case study strongly support Hausman's contentions.

  8. Mathematical modelling with case studies using Maple and Matlab

    CERN Document Server

    Barnes, B

    2014-01-01

    Introduction to Mathematical ModelingMathematical models An overview of the book Some modeling approaches Modeling for decision makingCompartmental Models Introduction Exponential decay and radioactivity Case study: detecting art forgeries Case study: Pacific rats colonize New Zealand Lake pollution models Case study: Lake Burley Griffin Drug assimilation into the blood Case study: dull, dizzy, or dead? Cascades of compartments First-order linear DEs Equilibrium points and stability Case study: money, money, money makes the world go aroundModels of Single PopulationsExponential growth Density-

  9. Case studies on age-management in organisations: report on organisational case studies

    OpenAIRE

    Punte, E.; Conen, W.S.; Schippers, J.; Henkens, C.J.I.M.

    2011-01-01

    The acquisition of case studies was thwarted by the economic crisis and the feeling of being ‘over-researched’ by potential organisations. Although organisations in some sectors (e.g. chemical manufacturing) reported the worst part of the economic crisis was behind, many organisations indicated getting through the crisis was their top priority. Especially in the first few months we had difficulties with getting through to organisations. The most difficulties we had at that time with longitudi...

  10. Structured Controversy: A Case Study Strategy.

    Science.gov (United States)

    Herreid, Clyde Freeman

    1996-01-01

    Introduces a dynamic form of the case instruction method that involves debate and compromise. Discusses two versions of structured controversy and presents an example of structured controversy that involves the use of DNA fingerprinting in forensic medicine. (JRH)

  11. Jane: A Case Study in Anorexia Nervosa.

    Science.gov (United States)

    Willingham, Barbara

    1988-01-01

    The article reports the case history of a 15-year-old Australian girl with anorexia nervosa. Information is also given on prevalence, causes, definitions, and treatments including hospitalization, co-therapy, psychotherapy, behavior modification, family therapy, and counseling. (DB)

  12. Phyllodes tumor in adolescent. Case study.

    OpenAIRE

    Lidia Torres Aja; Julio Sarmiento Sánchez; María Caridad Rubio Hernández

    2008-01-01

    Presentation of the case of a patient (18 years old) who was assisted in the provincial mastology consultation for a non painful tumor, of sudden growth covering almost all the right breast, without other symptom or sing. After some tests, it was decided to operate. The tumor turned to be benign phyllodes. The relevance of this case lies in the infrequent appearance of this type of tumor, being even the first to be operated in our hospital.

  13. CERVICO-VAGINAL SWABS TO PREDICT PROM: A CASE STUDY

    Directory of Open Access Journals (Sweden)

    Boricha

    2013-04-01

    Full Text Available ABSTRACT: BACKGROUND: The presence of lower genital tract infections poses a threat to the health of a woman. During pregnancy, these infection s may also have a direct effect on the fetus or may indirectly predispose to fetal damage secondar y to premature labour or premature rupture of membranes. Early detection is thus import ant because maternal physiological alterations and the presence of a fetus may hamper the diagnosis and the management of such infections. Antepartum treatment of lower genital tr act infections or bacterial colonization has been found to reduce the incidence of preterm births . OBJECTIVES: To study the impact of education and socio-economic background, to assess diagnostic efficacy in pregnancy, to study the effect of intervention on the outcome of pregnan cy and finally, to study the appropriate trimester for taking a cervicovaginal swab in pregna nt women. MATERIALS AND METHODS - Our case study was a prospective study involving 100 pregnant women following up in the outpatient department of a community hospital from 200 8-2010 with respect to their cervicovaginal microbial growth in each trimester. Patients were divided into culture positive and negative groups and treated accordingly RESULTS – In our study, we found that streptococcus, candida and staphylococcus were the mo st commonly prevalent among all the microorganisms isolated. Out of 100 women, 27 were swab positive in the 1 st trimester with an increasing trend of 1% in swab positivity in subsequ ent trimesters. Among swab positive cases, 51.85%(1 st , 50%(2 nd and 51.72%(3 rd landed up in preterm labour with or without PROM. CONCLUSION – There was a very high positive correlation between the incidence of a positive swab culture and preterm events. We found that the best time for a cervicovaginal swab was during the 3 rd trimester. Our study had a high negative predictiv e value i.e. absence of growth were best in predicting that cases would not go in t o

  14. Consideration of social scientific issues in a safety case. Final report

    International Nuclear Information System (INIS)

    The research outcome presented here - a model for identifying and describing safety-relevant social scientific issues - provides a scientific basis for addressing these issues in a safety case. In order for them to be implemented in a repository process, it would be necessary to elaborate in greater detail the initial conceptual foundations that have been laid in this research project in line with the project's terms of reference. The requisite elaboration relates to binding rules for designing the repository process, particularly with regard to the stages in which the safety case is to be developed during planning, approval, construction and operation through to repository closure. Such detailed elaboration also needs to involve specifying the extent to which each social scientific issue and sub-issue is to be addressed in the different stages. Consideration would need to be given not only to the relevance of the issue for a given stage but also to the various options and methods for providing proof of safety. It would be possible to draw on experiences with handling safety management in nuclear power plants - a sphere in which over the last ten years efforts have been ongoing to develop methods for presentation by the operator and review by the authorities. Furthermore, it is likely that the social scientific issues relevant to a safety case cannot be defined once and for all in a single process, but that the need for continual revision and adaptation will arise due to both the increasing knowledge acquired during the course of the repository process and the experiences and expectations of stakeholders (similarly to experiences in the sphere of scientific-technological requirements). Appropriate conditions need to be defined for such a process. This process could be supported by implementing the option mentioned above whereby a regulatory definition of safety management for geological disposal is formulated which encompasses all safety-relevant social scientific

  15. Brazilian oil spills chemical characterization : case studies

    International Nuclear Information System (INIS)

    The Petrobras Research Centre has been active in responding to some significant oil spills in Brazil in the past decade. The centre has characterized spilled oil, monitored the affected ecosystems and determined the fate of oil in the environment. This paper described the use of some advanced chemical analytical techniques used in Brazilian oil spill studies to determine fractions and individual petroleum hydrocarbons in water, groundwater, sediment, sand, fish and the spilled oil itself. Some of the most recent oil spill cases were discussed in terms of chemical characterization of the spilled oil and the environmental samples from different matrices of the affected ecosystems for determining the fate of the oil in the environment and to assess environmental damage. In particular, methods such as gas chromatography/flame ionization detector, P and T/GC/PID and gas chromatography/mass spectrometry have been used to examine crude and fuel oil spills in Guanabara Bay, Barigui and Iguassu Rivers, and the Sao Sebastiao Channel. The chemical analytical methods are used to determine total petroleum hydrocarbons, n-alkanes, isoprenoids, unresolved complex mixtures, volatile monoaromatic compounds such as BTEX (benzene, toluene, ethylbenzene and xylenes), as well as parent and alkylated homologues polycyclic aromatic hydrocarbons (PAH) and terpanes and steranes. Acute ecotoxicity data for water and sediment samples was also included. It was determined that with certain limitations, PAH ratios can help determine the origin of hydrocarbons as being either petrogenic or pyrolytic. However, alkylated PAH homologues and parent compounds such as dibenzothiophene and perylene give more precise interpretation of the data. 30 refs., 9 tabs., 11 figs

  16. A Case Study Model for Augmentative and Alternative Communication Outcomes

    Science.gov (United States)

    Hill, Katya

    2006-01-01

    Case studies are an accepted method for reporting treatment outcomes. However, to be useful and authentic, a systematic and principled approach to collecting, analyzing, and reporting case data must be observed. This paper proposes a basic case study format for documenting augmentative and alternative communication (AAC) intervention to ensure…

  17. Case Studies In Business Market Research: An Abductive Approach

    OpenAIRE

    DuBois, A.; Gadde, L

    1999-01-01

    Case studies are frequently used in industrial network research. In this paper we discuss the difficulties and opportunities characterizing the case study approach. In particular we deal with single case research aiming at theory generation. For this purpose we suggest an approach based on 'systematic combining' grounded in an 'abductive' logic.

  18. A clinico-pathological study of 70 cases of pemphigus

    Directory of Open Access Journals (Sweden)

    Arya S

    1999-01-01

    Full Text Available A clinicopalhological study of 70 cases of pemphigus observed over a span of four and a half years from January 1992 to June 1996 at the Sir J.J. Group of Hospitals and Grant Medical College, Mumbai is reported. Pemphigus vulgaris constituted the single largest group of 43 cases, followed by pemphigus foliaceus (25 cases and pemphigus vegetans (2 cases. Majority of the cases were seen in the age group of 21-60 years, with a slight male predominance. The youngest patient was 14 years while the eldest was aged 75 years. Mucosal involvement was seen in 31 cases of pemphigus vulgaris, as opposed to only 5 cases of pemphigus foliaceus. Flaccid bullae were present in 100% cases. Pruritus was complained of in 14 cases, though it was more common in pemphigus vegetans and vulgaris. Salient histopathological features of pemphigus vulgaris observed were (I intraepidermal suprabasal blisters (35 cases, (2 presence of acantholytic cells (40 cases, (3 "Row of tombstone appearance" (I8 cases and (4 acantholysis involving follicular sheath (20 cases. Main histopathological features of pemphigus foliaceus were (1 subcorneal blister (15 case, (2 acantholysis (24 cases and (3 bulla cavity containing inflammatory infiltrate (12 cases. Both cases of pemphigus vegetans showed hyperkeratosis, papillomatosis and irregular acanthosis with intra-epidermal eosinophilic abscesses besides suprabasal lacunae.

  19. ON FRACTAL MECHANISM OF COASTLINE -A Case Study of China

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    MANDELBROT enunciated the uncertainty of the length of a coastline in his paper" How long is the coastline of Britain?" published in " Science" in 1967. The fractal concept was presented for the first time in that paper and has been applied to many fields ever since. According to the fractal theory and conditions of fractal research of coastline, the controls of faults and biologic function on the fractal character of coastline are preliminarily discussed on the basis of GIS in this paper . Finally, some significant conclusions are drawn: 1) the faults control the basic trends of coastlines of two study areas;2) the fractal dimension of coastline of Taiwan is smaller than that of Changle- Lufeng, because the faults of Taiwan more intensely control the trend and fractal dimension of the coastline;3) the larger the fractal dimension of the faults or the major faults, the more the controlling effect of them on the trend and fractal dimension of coastline; 4) the larger fractal dimension of the coastline of Changle- Lufeng indicates that the biologic function intensely shapes the coastline. In a word, the controls of faults and biologic function on the fractal character of coastline are discussed with a case study of China in this paper, it can be seen that faults and biologic function both have influence over the trend and fractal dimension of coastline, the fractal mechanism of coastline of two study areas may be so.

  20. Neutron Scattering Studies of Fundamental Processes in Earth Materials, Final Report

    International Nuclear Information System (INIS)

    The aim of this work was to use neutron scattering techniques to explore the dynamics and structure of water in rock samples. The dynamics of water in rock at low (residual) saturation are directly related to the transport properties of fluids within the host rock. The structure of water in rock may be related to the elastic behavior of the rock, which in many cases is nonlinear and hysteretic. Neutron scattering techniques allow us to study water in intact rock samples at both the molecular and microstructural scales. Our samples were Berea sandstone, Calico Hills and Prow Pass tuffs from Yucca Mountain, NV, and pure samples of the tuff constituents, specifically mordenite and clinoptilolite. We chose Berea sandstone because its macroscopic elastic behavior is known to be highly unusual, and the microscopic mechanisms producing this behavior are not understood. We chose Yucca Mountain tuff, because the fluid transport properties of the geologic structure at Yucca Mountain, Nevada could be relevant to the performance of a high level nuclear waste repository at that site. Neutron scattering methods have a number of properties that are extremely useful for the study of earth materials. In contrast to X-rays, neutrons have very low absorption cross-sections for most elements so that entire bulk samples of considerable size can be 'illuminated' by the neutron beam. Similarly, samples that are optically opaque can be readily investigated by inelastic neutron scattering techniques. Neutrons are equally sensitive to light atoms as to heavy atoms, and can, for example, readily distinguish between Al and Si, neighboring atoms in the periodic table that are difficult to tell apart by X-ray diffraction. Finally, neutrons are particularly sensitive to hydrogen and thus can be used to study the motions, both vibrational and diffusive, of H-containing molecules in rocks, most notably of course, water. Our studies were primarily studies of guest molecules (in our case, water) in