A Case Study of Educational Computer Game Design by Middle School Students

Science.gov (United States)

An, Yun-Jo

2016-01-01

Only a limited number of research studies have investigated how students design educational computer games and its impact on student learning. In addition, most studies on educational game design by students were conducted in the areas of mathematics and science. Using the qualitative case study approach, this study explored how seventh graders…

CASE STUDIES OF USE OF DESIGN OF EXPERIMENTS IN MATERIAL RESEARCH

Directory of Open Access Journals (Sweden)

Salil Kumar Roy

2003-01-01

Full Text Available The paper describes principles of factorial and fractional factorial design of experiments. The various ways of analysing data obtained by these procedures are shown via four case studies. Yates method was followed in case 1 where the effect of anode type, carbon content of steel, temperature, and agitation on cathodic protection of steel in seawater, on current density, was studied. In case 2, a glass was formulated within 10 constituante melted, quantity water and tested for flow caracteristics, from the result the factor effect was calculated. In case 3, analysis of results is done in a very simple way. In this case, the effect of carbon content, surface condition, temperature, and agitation on the corrosion of steel in seawater was studied. In case 4, the effect of eleven constituents on acid resistance of a cast iron enamel has been studied through sixteen experimental compositions. This case gives a method to find out which of the sixteen experimental compositions is nearest to a target value.

Scenario for concurrent conceptual assembly line design: A case study

Science.gov (United States)

Mas, F.; Ríos, J.; Menéndez, J. L.

2012-04-01

The decision to design and build a new aircraft is preceded by years of research and study. Different disciplines work together throughout the lifecycle to ensure not only a complete functional definition of the product, but also a complete industrialization, a marketing plan, a maintenance plan, etc. This case study focuses on the conceptual design phase. During this phase, the design solutions that will meet the functional and industrial requirements are defined, i.e.: the basic requirements of industrialization. During this phase, several alternatives are studied, and the most attractive in terms of performance and cost requirements is selected. As a result of the study of these alternatives, it is possible to define an early conceptual design of the assembly line and its basic parameters. The plant needs, long cycle jigs & tools or industrial means and human resources with the necessary skills can be determined in advance.

A Human Work Interaction Design (HWID) Case Study in E-Government and Public Information Systems

DEFF Research Database (Denmark)

Clemmensen, Torkil

2011-01-01

This paper first outlines a revised version of the general HWID framework, with a focus on what connects empirical work analysis and interaction design, and then presents a case study of the Danish government one-for-all authentication system NemID. The case is briefly analyzed, using ethnomethod...... in studying how human work analysis and interaction design in concrete cases are related and connected.......This paper first outlines a revised version of the general HWID framework, with a focus on what connects empirical work analysis and interaction design, and then presents a case study of the Danish government one-for-all authentication system NemID. The case is briefly analyzed, using...... ethnomethodology, work domain/task analysis, and the HWID approach, and comparing the results. Compared to the traditional approaches, the HWID focus on case-specific connections between human work and interaction design, gives different and supplementary answers. The conclusion is that there are benefits...

Architecture and Design for Virtual Conferences: A Case Study

Directory of Open Access Journals (Sweden)

Andrew Sempere

2011-07-01

Full Text Available This paper presents a case study of the design issues facing a large multi-format virtual conference. The conference took place twice in two different years, each time using an avatar-based 3D world with spatialized audio including keynote, poster and social sessions. Between year 1 and 2, major adjustments were made to the architecture and design of the space, leading to improvement in the nature of interaction between the participants. While virtual meetings will likely never supplant the effectiveness of face-to-face meetings, this paper seeks to outline a few design principles learned from this experience, which can be applied generally to make computer mediated collaboration more effective.

A case study analysis of the application of design for manufacture principles by industrial design students

OpenAIRE

Marshall, R; Page, T

2016-01-01

This paper describes a case study evaluation of a module that engages students on product and industrial design programmes with the principles of Design for Manufacturing (DFM). The primary element of the module is to expose students to the constraints of a full design to manufacture process. The module explores the design of a small polymer promotional item, together with the means of mass producing that item. This is done through the process of injection moulding and students design an inje...

Design Fixation and Cooperative Learning in Elementary Engineering Design Project: A Case Study

Directory of Open Access Journals (Sweden)

Yi Luo

2015-09-01

Full Text Available This paper presents a case study examining 3rd, 4th and 5th graders’ design fixation and cooperative learning in an engineering design project. A mixed methods instrument, the Cooperative Learning Observation Protocol (CLOP, was adapted to record frequency and class observation on cooperative learning engagement through detailed field notes. Students’ design journals and reflections were also analyzed for an inductive qualitative analysis. The findings indicate three major themes of design fixation: 1 fixation on common features of things; 2 fixation on popular teenage culture; 3 fixation on the first design idea. In the cooperative learning process of elementary engineering design project, although pupils had demonstrated some abilities to solve concrete problems in a logical fashion, the participants encountered a number of obstacles in the group. Dominance, social loafing, and other problems occurring in the group process might have offset certain benefits of cooperative learning. Implications of the findings are also discussed.

Design fixation and cooperative learning in elementary engineering design project: A case study

Directory of Open Access Journals (Sweden)

Yi Luo

2015-09-01

Full Text Available This paper presents a case study examining 3rd, 4th and 5th graders’ design fixation and cooperative learning in an engineering design project. A mixed methods instrument, the Cooperative Learning Observation Protocol (CLOP, was adapted to record frequency and class observation on cooperative learning engagement through detailed field notes. Students’ design journals and reflections were also analyzed for an inductive qualitative analysis. The findings indicate three major themes of design fixation: 1 fixation on common features of things; 2 fixation on popular teenage culture; 3 fixation on the first design idea. In the cooperative learning process of elementary engineering design project, although pupils had demonstrated some abilities to solve concrete problems in a logical fashion, the participants encountered a number of obstacles in the group. Dominance, social loafing, and other problems occurring in the group process might have offset certain benefits of cooperative learning. Implications of the findings are also discussed.

Does decision documentation help junior designers rationalize their decisions? A comparative multiple-case study

OpenAIRE

Heesch, U. van; Avgeriou, P.; Tang, A.

2013-01-01

Software architecture design is challenging, especially for junior software designers. Lacking practice and experience, junior designers need process support in order to make rational architecture decisions. In this paper, we present the results of a comparative multiple-case study conducted to find out if decision viewpoints from van Heesch et al. (2012, in press) can provide such a support. The case study was conducted with four teams of software engineering students working in industrial s...

Service platforms management strategy: case study of an interior design firm

Directory of Open Access Journals (Sweden)

Leonel Del Rey de Melo Filho

2015-03-01

Full Text Available Platform management is a strategic tool for firms of various sizes, although it demands studies in the service sector. The aim of this paper is to investigate a use of platform management, designed to reach flexibility and operational dynamics in service projects. The studied platform is evaluated as a strategic resource in a particular case. The contributions of the service platform were explored from Resource-Based View (RBV and Service Marketing (SM perspectives, to study their effects on firms’ performance. The research strategy used was an exploratory case study in an interior design firm. The data collection techniques included a participant observation, document analysis and a focus group with firm managers. The research demonstrated that platform management is a strategic resource that assists with the planning of internal capabilities, market positioning, and provides better customer service.

Teachers as Participatory Designers: Two Case Studies with Technology-Enhanced Learning Environments

Science.gov (United States)

Cober, Rebecca; Tan, Esther; Slotta, Jim; So, Hyo-Jeong; Könings, Karen D.

2015-01-01

Teachers are not typically involved as participatory designers in the design of technology-enhanced learning environments. As they have unique and valuable perspectives on the role of technology in education, it is of utmost importance to engage them in a participatory design process. Adopting a case study methodology, we aim to reveal in what…

Fostering Integrated Learning and Faculty Collaboration through Curriculum Design: A Case Study

Science.gov (United States)

Routhieaux, Robert L.

2015-01-01

Designing and implementing innovative curricula can enhance student learning while simultaneously fostering faculty collaboration. However, innovative curricula can also surface numerous challenges for faculty, staff, students, and administration. This case study documents the design and implementation of an innovative Master of Business…

The applicability of constructivist user studies: how can constructivist inquiry inform service providers and systems designers? Constructivist inquiry, Case study, Systems design, User behaviour

Directory of Open Access Journals (Sweden)

Alison Pickard

2004-01-01

Full Text Available This paper has attempted to clarify the ways in which individual, holistic case studies, produced via the process of constructivist inquiry, can be tested for trustworthiness and applied to other, similar situations. Service providers and systems designers need contextual information concerning their users in order to design and provide systems and services that will function effectively and efficiently within those contexts. Abstract models can only provide abstract insight into human behaviour and this is rarely sufficient detail upon which to base the planning and delivery of a service. The methodological issues which surround the applicability of individual, holistic case studies are discussed, explaining the concept of 'contextual applicability.' The relevance and usefulness of in-depth case study research to systems designers and service providers is highlighted.

All my friends are here: Four initial case studies on student design agencies

Directory of Open Access Journals (Sweden)

Peter Benz

2013-10-01

Full Text Available Student design agencies have not previously received much – if any – academic attention, despite their having become fairly common in the context of tertiary design / visual arts institutions since the late 1990s as a way of providing work–study experiences. This article, for the first time, outlines case studies of four international student design agencies in Germany, Malaysia and the USA, including their background, their legal set-up, their relations with their parent institutions, and their (business activities and general operations, as well as their members’ motivations for participation. All case studies are based on interviews by email or Skype with respective agency heads conducted from November 2012 to January 2013. The information obtained from the interviews was further rounded by additional materials – where available – and turned into short comprehensive narratives that highlight the particular qualities of the respective cases. The concluding comparison of these four narratives establishes that student design agencies are worthwhile knowledge transfer endeavours with strong indications of educational value, though more formal research would need to be done to confirm quantitative and qualitative effects. The four cases also allow for the deduction that the most important criterion for the success of a student design agency is its ability to create an intensive working experience with a strong focus on team interaction, and that the achievement of such experience is essentially based on on-campus space, staff involvement, competitive admission and non-business-related activities. Keywords: student design agency, knowledge transfer, student entrepreneurs, entrepreneurship, business innovation

Collaborative Design of World Wide Web Pages: A Case Study.

Science.gov (United States)

Andrew, Paige G; Musser, Linda R.

1997-01-01

This case study of the collaborative design of an earth science World Wide Web page at Pennsylvania State University highlights the role of librarians. Discusses the original Web site and links, planning, the intended audience, and redesign and recommended changes; and considers the potential contributions of librarians. (LRW)

TA Treatment of Depression - A Hermeneutic Single-Case Efficacy Design Study - ‘Linda’ - a mixed outcome case

Directory of Open Access Journals (Sweden)

Mark Widdowson

2013-07-01

Full Text Available Hermeneutic Single-Case EfficacyDesign (HSCED is a systematic case study research method involving the cross-examination of mixed method data to generate both plausible arguments that the client changed due to therapy and alternative explanations. The present study is the fourth article of a case series which has investigated the process and outcome of transactional analysis psychotherapy using Hermeneutic Single-Case Efficacy Design (Elliott 2002. The client, Linda, was a 45 yearold white British woman with mild depression who attended nine sessions of therapy. The conclusion of the judges was that this was a mixed-outcome case:whilst the client improved over the course of therapy and was positive about her experience of therapy, her changes did not last when she experienced considerable stressful events during follow-up. Linda provided a detailed and idiosyncratic description of the aspects of the therapy which were most helpful for her. A cross-case comparison with other cases in this series suggests several interesting features which are worthy of further investigation. Specifically, the use of a shared theoretical framework and an egalitarian therapeutic relationship were helpful. As with other cases in this series, the client experienced positive changes in her interpersonal relationships suggesting that this outcome of TA therapy warrants further investigation

The Need for Design Cases: Disseminating Design Knowledge

Directory of Open Access Journals (Sweden)

Elizabeth Boling

2010-01-01

Full Text Available This article covers the definition of a design case as a specialized and critical form of design knowledge, including discussion of similar types of scholarship that are not design cases and the characteristic ways in which design cases are used. Arguments for developing rigorous design cases are presented.

Designing for Diverse Learning: Case Study of Place-Based Learning in Design and Technologies Pre-Service Teacher Education

Science.gov (United States)

Best, Marnie; MacGregor, Denise; Price, Deborah

2017-01-01

Place-based learning experiences in Design and Technologies education connect people and place with design processes and products. Drawing on place-based learning, this case study shares the experiences of eight final year pre-service Design and Technologies education students from the University of South Australia as they collaborated with…

Sampling design considerations for demographic studies: a case of colonial seabirds

Science.gov (United States)

Kendall, William L.; Converse, Sarah J.; Doherty, Paul F.; Naughton, Maura B.; Anders, Angela; Hines, James E.; Flint, Elizabeth

2009-01-01

For the purposes of making many informed conservation decisions, the main goal for data collection is to assess population status and allow prediction of the consequences of candidate management actions. Reducing the bias and variance of estimates of population parameters reduces uncertainty in population status and projections, thereby reducing the overall uncertainty under which a population manager must make a decision. In capture-recapture studies, imperfect detection of individuals, unobservable life-history states, local movement outside study areas, and tag loss can cause bias or precision problems with estimates of population parameters. Furthermore, excessive disturbance to individuals during capture?recapture sampling may be of concern because disturbance may have demographic consequences. We address these problems using as an example a monitoring program for Black-footed Albatross (Phoebastria nigripes) and Laysan Albatross (Phoebastria immutabilis) nesting populations in the northwestern Hawaiian Islands. To mitigate these estimation problems, we describe a synergistic combination of sampling design and modeling approaches. Solutions include multiple capture periods per season and multistate, robust design statistical models, dead recoveries and incidental observations, telemetry and data loggers, buffer areas around study plots to neutralize the effect of local movements outside study plots, and double banding and statistical models that account for band loss. We also present a variation on the robust capture?recapture design and a corresponding statistical model that minimizes disturbance to individuals. For the albatross case study, this less invasive robust design was more time efficient and, when used in combination with a traditional robust design, reduced the standard error of detection probability by 14% with only two hours of additional effort in the field. These field techniques and associated modeling approaches are applicable to studies of

Complexity in Design-Driven Innovation: A Case Study of Knowledge Transfer Flow in Subsea Seismic Sensor Technology and Design Education

Science.gov (United States)

Pavel, Nenad; Berg, Arild

2015-01-01

To the extent previously claimed, concept exploration is not the key to product innovation. However, companies that are design-focused are twice as innovative as those that are not. To study design-driven innovation and its occurrence in design education, two case studies are conducted. The first is an example of design practice which includes…

Urban design for post-earthquake reconstruction: A case study of Wenchuan County, China

NARCIS (Netherlands)

Liu, L.X.; Lin, Y.L.; Wang, S.F.

2014-01-01

Urban design for post-earthquake reconstruction emphasizes strategies, safety, memorials and institutional arrangements. It is closely related to earthquake recovery plans. This article reviews general studies on urban design for post-earthquake reconstruction, before focussing on the case of

Workspace Design: A case study applying participatory design principles of healthy workplaces in an industrial setting

DEFF Research Database (Denmark)

Broberg, Ole

2010-01-01

The Danish Workspace Design (WSD) research program is aimed to develop and trial a potential new concept for ergonomists and other workplace consultants who are to engage in socio-technical design processes. The objective of this paper is to report on the trial of the workspace design concept...... in a case involving the design and implementation of a new mixing technology in an industrial plant. The case showed how the WSD concept can contribute to an engineering design process. The WSD team took the role as workspace designer and by the participatory workshops achieved an impact on the technology...... project. In the role as workspace designer it was important for the WSD team to make sure that the achievements in the workshops were “transmitted” to and sustained in the ordinary engineering design process. In this case, it turned out that the artefacts such as a layout game board and documents...

Quantification of construction waste prevented by BIM-based design validation: Case studies in South Korea.

Science.gov (United States)

Won, Jongsung; Cheng, Jack C P; Lee, Ghang

2016-03-01

Waste generated in construction and demolition processes comprised around 50% of the solid waste in South Korea in 2013. Many cases show that design validation based on building information modeling (BIM) is an effective means to reduce the amount of construction waste since construction waste is mainly generated due to improper design and unexpected changes in the design and construction phases. However, the amount of construction waste that could be avoided by adopting BIM-based design validation has been unknown. This paper aims to estimate the amount of construction waste prevented by a BIM-based design validation process based on the amount of construction waste that might be generated due to design errors. Two project cases in South Korea were studied in this paper, with 381 and 136 design errors detected, respectively during the BIM-based design validation. Each design error was categorized according to its cause and the likelihood of detection before construction. The case studies show that BIM-based design validation could prevent 4.3-15.2% of construction waste that might have been generated without using BIM. Copyright © 2015 Elsevier Ltd. All rights reserved.

Five Principles for MOOC Design: With a Case Study

Directory of Open Access Journals (Sweden)

John R. Drake

2015-05-01

Full Text Available New web technologies have enabled online education to take on a massive scale, prompting many universities to create massively open online courses (MOOCs that take advantage of these technologies in a seemingly effortless manner. Designing a MOOC, however, is anything but trivial. It involves developing content, learning activities, and assessments to accommodate both the massiveness and openness of the course. To design an effective MOOC, instructors need to integrate both pedagogical and information systems theory. In this paper, we present a case study of a MOOC grant and a series of decisions made in its development. These decisions, when paired with the theoretical framework, suggest five principles – meaningful, engaging, measurable, accessible, and scalable – may be applicable to future MOOC development projects.

Does decision documentation help junior designers rationalize their decisions? A comparative multiple-case study

NARCIS (Netherlands)

Heesch, U. van; Avgeriou, P.; Tang, A.

Software architecture design is challenging, especially for junior software designers. Lacking practice and experience, junior designers need process support in order to make rational architecture decisions. In this paper, we present the results of a comparative multiple-case study conducted to find

Applying Case-Based Method in Designing Self-Directed Online Instruction: A Formative Research Study

Science.gov (United States)

Luo, Heng; Koszalka, Tiffany A.; Arnone, Marilyn P.; Choi, Ikseon

2018-01-01

This study investigated the case-based method (CBM) instructional-design theory and its application in designing self-directed online instruction. The purpose of this study was to validate and refine the theory for a self-directed online instruction context. Guided by formative research methodology, this study first developed an online tutorial…

APPLIED KNOWLEDGE MANAGEMENT IN SMALL DESIGN FIRMS: CASE STUDY

Directory of Open Access Journals (Sweden)

Christian Donin

2016-09-01

Full Text Available Knowledge is the new strategic imperative of organizations. The ability to manage knowledge is a crucial part of any organizations operational processes. The creation and diffusion of knowledge have become ever more important factors in competitiveness. This paper investigates the Knowledge Management and flow information and in small design firms. It is divided into three main parts. The first part of this paper describes the importance of Knowledge Management for organizations are described together with responsibilities needed to ensure successful Knowledge Management implementations and the Spiral of Organizational Knowledge Creation conception. The second part approaches literature available about process and organizational structure and information flow related to Brazilian design firms. Finally, this paper presents a case study of small design office of Civil Engineering identifying organizational process, verifying the types of communication practices and identifying the types of dynamic process of The Spiral of Organizational Knowledge Creation, KM strategy and dynamic through Knowledge Transfer.

What's in a Name? The Incorrect Use of Case Series as a Study Design Label in Studies Involving Dogs and Cats.

Science.gov (United States)

Sargeant, J M; O'Connor, A M; Cullen, J N; Makielski, K M; Jones-Bitton, A

2017-07-01

Study design labels are used to identify relevant literature to address specific clinical and research questions and to aid in evaluating the evidentiary value of research. Evidence from the human healthcare literature indicates that the label "case series" may be used inconsistently and inappropriately. Our primary objective was to determine the proportion of studies in the canine and feline veterinary literature labeled as case series that actually corresponded to descriptive cohort studies, population-based cohort studies, or other study designs. Our secondary objective was to identify the proportion of case series in which potentially inappropriate inferential statements were made. Descriptive evaluation of published literature. One-hundred published studies (from 19 journals) labeled as case series. Studies were identified by a structured literature search, with random selection of 100 studies from the relevant citations. Two reviewers independently characterized each study, with disagreements resolved by consensus. Of the 100 studies, 16 were case series. The remaining studies were descriptive cohort studies (35), population-based cohort studies (36), or other observational or experimental study designs (13). Almost half (48.8%) of the case series or descriptive cohort studies, with no control group and no formal statistical analysis, included inferential statements about the efficacy of treatment or statistical significance of potential risk factors. Authors, peer-reviewers, and editors should carefully consider the design elements of a study to accurately identify and label the study design. Doing so will facilitate an understanding of the evidentiary value of the results. Copyright © 2017 The Authors. Journal of Veterinary Internal Medicine published by Wiley Periodicals, Inc. on behalf of the American College of Veterinary Internal Medicine.

Beyond access: a case study on the intersection between accessibility, sustainability, and universal design.

Science.gov (United States)

Gossett, Andrea; Mirza, Mansha; Barnds, Ann Kathleen; Feidt, Daisy

2009-11-01

A growing emphasis has been placed on providing equal opportunities for all people, particularly people with disabilities, to support participation. Barriers to participation are represented in part by physical space restrictions. This article explores the decision-making process during the construction of a new office building housing a disability-rights organization. The building project featured in this study was developed on the principles of universal design, maximal accessibility, and sustainability to support access and participation. A qualitative case study approach was used involving collection of data through in-depth interviews with key decision-makers; non-participant observations at design meetings; and on-site tours. Qualitative thematic analysis along with the development of a classification system was used to understand specific building elements and the relevant decision processes from which they resulted. Recording and analyzing the design process revealed several key issues including grassroots involvement of stakeholders; interaction between universal design and sustainable design; addressing diversity through flexibility and universality; and segregationist accessibility versus universal design. This case study revealed complex interactions between accessibility, universal design, and sustainability. Two visual models were proposed to understand and analyze these complexities.

Access, Astronomy and Science Fiction. A Case Study in Curriculum Design

Science.gov (United States)

Saunders, Danny; Brake, Mark; Griffiths, Martin; Thornton, Rosi

2004-01-01

It is argued that a positive response to lifelong learning policies involves the use of imaginative curriculum design in order to attract learners from disadvantaged backgrounds who are otherwise alienated from higher education. In this article a case study is presented based on the popularity of science fiction within popular culture, beginning…

Issues in Designing a Hypermedia Document System: The Intermedia Case Study.

Science.gov (United States)

Yankelovich, Nicole; And Others

1986-01-01

Intermedia, a hypermedia system developed at Brown University's Institute for Research (Rhode Island) in Information and Scholarship, is first described, and then used as a case study to explore a number of key issues that software designers must consider in the development of hypermedia document systems. A hypermedia document system is defined as…

Emergency Response Program Designing Based On Case Study ERP Regulations In Ilam Gas Refinery

Directory of Open Access Journals (Sweden)

Mehdi Tahmasbi

2015-08-01

Full Text Available The study of Emergency response plan designing is one of the most important prevention approaches in crisis management. This study aims to design emergency response plan based on case study ERP regulations in Ilam gas refinery. On the basis of risk assessment and identification techniques such as HAZOP and FMEA in Ilam gas refinery the risks have been prioritized and then according to this prioritization the design of possible scenarios which have the highest rate of occurrence and the highest level of damage has been separated. Possible scenarios were simulated with PHAST software. Then emergency response program has been designed for the special mode or similar cases. According to the internal emergency response plan for Ilam gas refinery and predictable conditions of the process special instructions should be considered at the time of the incident to suffer the least damage on people and environment in the shortest time possible.

Case-Based Instructional Practices: A Multiple-Case Study from Torts, Marketing, and Online Instructional Design Classes

Science.gov (United States)

Jung, Ji yoon

2017-01-01

The purpose of this study is to provide a comprehensive account on case-based instructional practices. Semester-long participant observation records in torts, marketing, and online instructional design classes, instructor interviews, course syllabi and teaching materials were used to describe the within-class complexity of the practices in terms…

Layout Design for a Low Capacity Manufacturing Line: A Case Study

Directory of Open Access Journals (Sweden)

Filippo De Carlo

2013-08-01

transportation times and costs. The result of the case study showed a slight advantage with the lean approach in considering such efficiency indicators. In addition, the lean production methods allowed the designers to identify some inefficiencies that other approaches could not see, since the latter did not focus on production in a holistic way.

Designing human-robot collaborations in industry 4.0: explorative case studies

DEFF Research Database (Denmark)

Kadir, Bzhwen A; Broberg, Ole; Souza da Conceição, Carolina

2018-01-01

We are experiencing an increase in human-robot interactions and the use of collaborative robots (cobots) in industrial work systems. To make full use of cobots, it is essential to understand emerging challenges and opportunities. In this paper, we analyse three successful industrial case studies...... of cobots’ implementation. We highlight the top three challenges and opportunities, from the empirical evidence, relate them to current available literature on the topic, and use them to identify key design factor to consider when designing industrial work system with human-robot collaborations....

POOR QUALITY OF PRODUCT DESIGN AS A CAUSE OF OCCUPATIONAL HEALTH HAZARDS: A CASE STUDY

Directory of Open Access Journals (Sweden)

Janko D. Jovanović

2007-12-01

Full Text Available Quality of product design, which is expected from manufacturers on world market these days, could be provided exclusively by integral approach to product design. Such approach aims to achievement of optimal design solution of product, which is in line with a number of requirements, conditions and limitations of functionality, technology, market and usage. Only those manufacturers who are able to provide such approach to product design have prospective on market. This paper deals with a case study of neglect of integral approach to product design and its consequencies, in order to spread awareness of necessity of its adoption. Scope of this case study is focused on bridge crane whose working vibrations are meant to be potential cause of occupational desease of spinal column of crane operator.

Integrating Quality Matters into Hybrid Course Design: A Principles of Marketing Case Study

Science.gov (United States)

Young, Mark R.

2014-01-01

Previous research supports the idea that the success of hybrid or online delivery modes is more a function of course design than delivery media. This article describes a case study of a hybrid Principles of Marketing course that implemented a comprehensive redesign based on design principles espoused by the Quality Matters Program, a center for…

How To Design A Triple Bottom Line Organization: A Start-Up Case Study

Directory of Open Access Journals (Sweden)

Bernhard Schroeder

2014-05-01

Full Text Available In today’s business environment, where success for a start-up company is measured by early revenue and profit, it can be quite challenging to design a triple bottom line organization (people/planet/profit from the very beginning. We present a case study of a U.S.-based start-up firm and discuss its early challenges, developmental processes, and current success as a triple bottom line firm. The company’s founder and CEO, with no initial product, distribution, or revenue strategy, sought to develop a company that could provide the marketplace with a valuable product while also staying true to a corporate vision of positively affecting less fortunate people. Our analysis of the case suggests that the founder’s vision, passion, transparent communication, and leveraging of partners’ resources were key elements in building the firm. We draw implications of our case study for the designers of future triple bottom line organizations.

A Case Study of Designing an E-learning Electrical Engineering Course

Directory of Open Access Journals (Sweden)

Sameer Hanna Khader

2012-08-01

Full Text Available Abstract: This paper presents a case study of designing an e-learning course in the field of electrical engineering- Industrial automation program at Palestine Polytechnic University. The applied methodology consisting of few stages starting with formulating the major course objectives, extracting topics outcomes, design the appropriate teaching tools and storyboard, and as final stage the evaluation system is designed. On other hand, an information communication technology (ICT questionnaire has been designed and targeting attended in the course students with purpose evaluating student ICT knowledge, knowledge leveling, and treatment their weaknesses. The designed topics are modified according to feedback evaluation obtained from students throughout designed for this purpose questionnaire. The observed weaknesses in course topics have been eliminated and finally the modified course was uploaded to the university e-learning platform. Electrical engineering core course with 300 level was carried out for department students, where the obtained results shows significant enhancement in teaching and learning performances of both course instructors and students.

Risk Identification in the Early Design Stage Using Thermal Simulations—A Case Study

Directory of Open Access Journals (Sweden)

Seyed Masoud Sajjadian

2018-01-01

Full Text Available The likely increasing temperature predicted by UK Climate Impacts Program (UKCIP underlines the risk of overheating and potential increase in cooling loads in most of UK dwellings. This could also increase the possibility of failure in building performance evaluation methods and add even more uncertainty to the decision-making process in a low-carbon building design process. This paper uses a 55-unit residential unit project in Cardiff, UK as a case study to evaluate the potential of thermal simulations to identify risk in the early design stage. Overheating, increase in energy loads, carbon emissions, and thermal bridges are considered as potential risks in this study. DesignBuilder (DesignBuilder Software Ltd., Stroud, UK was the dynamic thermal simulation software used in this research. Simulations compare results in the present, 2050, and 2080 time slices and quantifies the overall cooling and heating loads required to keep the operative temperature within the comfort zone. Overall carbon emissions are also calculated and a considerable reduction in the future is predicted. Further analysis was taken by THERM (Lawrence Berkeley National Laboratory, Berkeley, CA, USA and Psi THERM (Passivate, London, UK to evaluate the thermal bridge risk in most common junctions of the case study and the results reveal the potential of thermal assessment methods to improve design details before the start of construction stage.

Integration process of theoretical courses with design studios in undergraduate education: Case studies of architecture and interior design studios

Directory of Open Access Journals (Sweden)

Ozmehmet Ecehan

2016-01-01

Full Text Available The formulations of studios are the most critical problem of design studies, because the foundation of further architectural education is based on these design studios. This paper focuses on discussions of studiobased design learning systems and curriculum developments on integral design studios that aims significant and innovative frameworks. In this context, integrated design studios are the newest approaches of architectural education. In this education system every studio has its own integral course. Integral courses give support to the design studios. This support can be either theoretical or practical. Knowledge that is related with the context of the design studio can be explained in this integrated course in some cases, in some cases as simulation program can be explained in some parts of the course. The support of the integral courses to the studios must be evaluated deeply. This paper presents the positive parts and negative parts of the new integral studio approach in this context. By this way, strong and weak parts of this education system is put forward.

Case Study Research Methodology

Directory of Open Access Journals (Sweden)

Mark Widdowson

2011-01-01

Full Text Available Commenting on the lack of case studies published in modern psychotherapy publications, the author reviews the strengths of case study methodology and responds to common criticisms, before providing a summary of types of case studies including clinical, experimental and naturalistic. Suggestions are included for developing systematic case studies and brief descriptions are given of a range of research resources relating to outcome and process measures. Examples of a pragmatic case study design and a hermeneutic single-case efficacy design are given and the paper concludes with some ethical considerations and an exhortation to the TA community to engage more widely in case study research.

Experimental design: Case studies of diagnostics optimization for W7-X

International Nuclear Information System (INIS)

Dreier, H.; Dinklage, A.; Fischer, R.; Hartfuss, H.-J.; Hirsch, M.; Kornejew, P.; Pasch, E.; Turkin, Yu.

2005-01-01

The preparation of diagnostics for Wendelstein 7-X is accompanied by diagnostics simulations and optimization. Starting from the physical objectives, the design of diagnostics should incorporate predictive modelling (e.g. transport modelling) and simulations of respective measurements. Although technical constraints are governing design considerations, it appears that several design parameters of different diagnostics can be optimized. However, a general formulation for fusion diagnostics design in terms of optimization is lacking. In this paper, first case studies of Bayesian experimental design aiming at applications on W7-X diagnostics preparation are presented. The information gain of a measurement is formulated as a utility function which is expressed in terms of the Kullback-Leibler divergence. Then, the expected range of data is to be included and the resulting expected utility represents the objective for optimization. Bayesian probability theory gives a framework allowing us for an appropriate formulation of the design problem in terms of probability distribution functions. Results are obtained for the information gain from interferometry and for the design of polychromators for Thomson scattering. For interferometry, studies of the choice of line-of-sights for optimum signal and for the reproduction of gradient positions are presented for circular, elliptical and W7-X geometries. For Thomson scattering, the design of filter transmissions for density and temperature measurements are discussed. (author)

The impacts of product design changes on supply chain risk: a case study

OpenAIRE

Lin, Yong; Zhou, Li

2011-01-01

Purpose: The main purpose of this paper is to address the impact of product design changes on supply chain risk, and to identify the supply chain risk dimensions in the Chinese special-purpose vehicle (SPV) industry in the context of product design change.\\ud \\ud Design/methodology/approach: Case study methodology is adopted to describe the current situation of supply chain risk management in the Chinese SPV industry. Data are mainly collected from in-depth semi-structured interviews, and a c...

Design of Diagnostics: Case Studies for Wendelstein 7-X

International Nuclear Information System (INIS)

Dreier, H.; Dinklage, A.; Fischer, R.; Hirsch, M.; Kornejew, P.; Pasch, E.

2005-01-01

The set of start-up diagnostics for Wendelstein 7-X is oriented to resolve physical issues of stellarator optimization [1]. The diagnostics philosophy of W7-X aims at extendable set-ups which are to be supplemented along the operation of the device. Planning diagnostics directly lead to the requirement to optimize their respective outcome. In many cases, the optimization is much restricted by technical constraints. But even in those cases, figures of robustness of the chosen design settings are beneficial for the diagnostic strategy. In this paper a framework for diagnostic design is presented employing the Bayesian probability theory. Part of the approach can be regarded as a virtual diagnostic, which describes the future experimental unit including its error statistics and is able to produce artificial data. The virtual diagnostic is fed with mock-up quantities of interest and hence it enables the designer to compare the outcome of the virtual diagnostic with its input. For the design of diagnostics in fusion experiments several figures of merit are possible, depend- ing on the optimization goal. Here physical questions like estimation of the density distribution or the density gradient are possible optimization targets as well as technical issues as the robustness of density measurements, e.g, for controlling purposes. Also the estimation of derived quantities - like gradients needed for modeling of the bootstrap current or of the radial electric field - might be considered to be the goal of a diagnostic design. (Author)

A Case Study of MOOCs Design and Administration at Seoul National University

Science.gov (United States)

Lim, Cheolil; Kim, Sunyoung; Kim, Mihwa; Han, Songlee; Seo, Seungil

2014-01-01

This research, based on the case study of edX at Seoul National University, which is running Korea's first Massive Open Online Courses (MOOCs), discussed and proposed the roles of principal facilitators, the process, and the relationships among various facilitators in selecting, designing, opening and administrating MOOCs classes. Researches on…

Integrating ergonomics in design processes: a case study within an engineering consultancy firm.

Science.gov (United States)

Sørensen, Lene Bjerg; Broberg, Ole

2012-01-01

This paper reports on a case study within an engineering consultancy firm, where engineering designers and ergonomists were working together on the design of a new hospital sterile processing plant. The objective of the paper is to gain a better understanding of the premises for integrating ergonomics into engineering design processes and how different factors either promote or limit the integration. Based on a grounded theory approach a model illustrating these factors is developed and different hypotheses about how these factors either promote and/or limit the integration of ergonomics into design processes is presented along with the model.

Sustainable Design Approach: A case study of BIM use

Science.gov (United States)

Abdelhameed, Wael

2017-11-01

alternative's consequences. The architect would settle down and proceed in the alternative design of the best sustainable analysis. In later design stages, using the sustainable types of materials such as insulation, cladding, etc., and applying sustainable building components such as doors, windows, etc. would add more improvements and enhancements in reaching better values and metrics. The paper describes the methodology of this design approach through BIM strategies adopted in design creation. Case studies of architectural designs are used to highlight the details and benefits of this proposed approach.

Design of a PLC control program for a batch plant : VHS case study 1

NARCIS (Netherlands)

Mader, A.H.; Brinksma, E.; Wupper, H.; Bauer, N.

2001-01-01

This article reports on the systematic design and validation of a PLC control program for the batch plant that has been selected as a case study for the EC project on Verification of Hybrid Systems (VHS). We show how a correct design of the control program can be obtained in an incremental manner

Design of a PLC Control Program for a Batch Plant - VHS Case Study 1

NARCIS (Netherlands)

Mader, Angelika H.; Brinksma, Hendrik; Wupper, H.; Bauer, N.

2001-01-01

This article reports on the systematic design and validation of a PLC control program for the batch plant that has been selected as a case study for the EC project on Verification of Hybrid Systems (VHS). We show how a correct design of the control program can be obtained in an incremental manner

Publishing Single-Case Research Design Studies That Do Not Demonstrate Experimental Control

Science.gov (United States)

Tincani, Matt; Travers, Jason

2018-01-01

Demonstration of experimental control is considered a hallmark of high-quality single-case research design (SCRD). Studies that fail to demonstrate experimental control may not be published because researchers are unwilling to submit these papers for publication and journals are unlikely to publish negative results (i.e., the file drawer effect).…

User-Centered Design for Interactive Maps: A Case Study in Crime Analysis

Directory of Open Access Journals (Sweden)

Robert E. Roth

2015-02-01

Full Text Available In this paper, we address the topic of user-centered design (UCD for cartography, GIScience, and visual analytics. Interactive maps are ubiquitous in modern society, yet they often fail to “work” as they could or should. UCD describes the process of ensuring interface success—map-based or otherwise—by gathering input and feedback from target users throughout the design and development of the interface. We contribute to the expanding literature on UCD for interactive maps in two ways. First, we synthesize core concepts on UCD from cartography and related fields, as well as offer new ideas, in order to organize existing frameworks and recommendations regarding the UCD of interactive maps. Second, we report on a case study UCD process for GeoVISTA CrimeViz, an interactive and web-based mapping application supporting visual analytics of criminal activity in space and time. The GeoVISTA CrimeViz concept and interface were improved iteratively by working through a series of user→utility→usability loops in which target users provided input and feedback on needs and designs (user, prompting revisions to the conceptualization and functional requirements of the interface (utility, and ultimately leading to new mockups and prototypes of the interface (usability for additional evaluation by target users (user… and so on. Together, the background review and case study offer guidance for applying UCD to interactive mapping projects, and demonstrate the benefit of including target users throughout design and development.

Case-only designs in pharmacoepidemiology: a systematic review.

Directory of Open Access Journals (Sweden)

Sandra Nordmann

Full Text Available BACKGROUND: Case-only designs have been used since late 1980's. In these, as opposed to case-control or cohort studies for instance, only cases are required and are self-controlled, eliminating selection biases and confounding related to control subjects, and time-invariant characteristics. The objectives of this systematic review were to analyze how the two main case-only designs - case-crossover (CC and self-controlled case series (SCCS - have been applied and reported in pharmacoepidemiology literature, in terms of applicability assumptions and specificities of these designs. METHODOLOGY/PRINCIPAL FINDINGS: We systematically selected all reports in this field involving case-only designs from MEDLINE and EMBASE up to September 15, 2010. Data were extracted using a standardized form. The analysis included 93 reports 50 (54% of CC and 45 (48% SCCS, 2 reports combined both designs. In 12 (24% CC and 18 (40% SCCS articles, all applicable validity assumptions of the designs were fulfilled, respectively. Fifty (54% articles (15 CC (30% and 35 (78% SCCS adequately addressed the specificities of the case-only analyses in the way they reported results. CONCLUSIONS/SIGNIFICANCE: Our systematic review underlines that implementation of CC and SCCS designs needs to be more rigorous with regard to validity assumptions, as well as improvement in results reporting.

Case-based Agile Fixture Design

Institute of Scientific and Technical Information of China (English)

无

2001-01-01

In order to realize the agility of the fixture design, such asreconfigurability, rescalability and reusability, fixture structure is function unit-based decomposed from a fire-new point of view. Which makes it easy for agile fixture to be reconfigured and modified. Thereby, the base of case-based agile fixture design system info is established.Whole case-based agile fixture design model is presented. In which, three modules are added relative to the other models, including case matching of fixture planning module, conflict arbitration module and agile fixture case modify module. The three modules could solve the previous problem that the experience and result are difficult to be reused in the process of design.Two key techniques in the process of the agile fixture design, the evaluation of case similarity, and restriction-based conflict arbitration, are listed. And some methods are presented to evaluate the similarity and clear up the conflict.

Designing Optical Spreadsheets-Technological Pedagogical Content Knowledge Simulation (S-TPACK): A Case Study of Pre-Service Teachers Course

Science.gov (United States)

Thohir, M. Anas

2018-01-01

In the 21st century, the competence of instructional technological design is important for pre-service physics teachers. This case study described the pre-service physics teachers' design of optical spreadsheet simulation and evaluated teaching and learning the task in the classroom. The case study chose three of thirty pre-service teacher's…

Design Case Retrieval by Generic Representations

NARCIS (Netherlands)

Achten, H.H.; Gero, J.S.

2000-01-01

Case-Based Reasoning and Case-Based Design have been proposed to utilize knowledge of previous design solutions to understand or solve current design problems. Case retrieval is often performed on the basis of verbal indexing systems, whereas in design the use of graphic representations is

Theory Testing Using Case Studies

DEFF Research Database (Denmark)

Møller, Ann-Kristina Løkke; Dissing Sørensen, Pernille

2014-01-01

The appropriateness of case studies as a tool for theory testing is still a controversial issue, and discussions about the weaknesses of such research designs have previously taken precedence over those about its strengths. The purpose of the paper is to examine and revive the approach of theory...... testing using case studies, including the associated research goal, analysis, and generalisability. We argue that research designs for theory testing using case studies differ from theorybuilding case study research designs because different research projects serve different purposes and follow different...... research paths....

Developing a quality by design approach to model tablet dissolution testing: an industrial case study.

Science.gov (United States)

Yekpe, Ketsia; Abatzoglou, Nicolas; Bataille, Bernard; Gosselin, Ryan; Sharkawi, Tahmer; Simard, Jean-Sébastien; Cournoyer, Antoine

2017-11-02

This study applied the concept of Quality by Design (QbD) to tablet dissolution. Its goal was to propose a quality control strategy to model dissolution testing of solid oral dose products according to International Conference on Harmonization guidelines. The methodology involved the following three steps: (1) a risk analysis to identify the material- and process-related parameters impacting the critical quality attributes of dissolution testing, (2) an experimental design to evaluate the influence of design factors (attributes and parameters selected by risk analysis) on dissolution testing, and (3) an investigation of the relationship between design factors and dissolution profiles. Results show that (a) in the case studied, the two parameters impacting dissolution kinetics are active pharmaceutical ingredient particle size distributions and tablet hardness and (b) these two parameters could be monitored with PAT tools to predict dissolution profiles. Moreover, based on the results obtained, modeling dissolution is possible. The practicality and effectiveness of the QbD approach were demonstrated through this industrial case study. Implementing such an approach systematically in industrial pharmaceutical production would reduce the need for tablet dissolution testing.

GIS-based landscape design research: Stourhead landscape garden as a case study

Directory of Open Access Journals (Sweden)

Steffen Nijhuis

2017-11-01

Full Text Available Landscape design research is important for cultivating spatial intelligence in landscape architecture. This study explores GIS (geographic information systems as a tool for landscape design research - investigating landscape designs to understand them as architectonic compositions (architectonic plan analysis. The concept ‘composition’ refers to a conceivable arrangement, an architectural expression of a mental construct that is legible and open to interpretation. Landscape architectonic compositions and their representations embody a great wealth of design knowledge as objects of our material culture and reflect the possible treatment of the ground, space, image and program as a characteristic coherence. By exploring landscape architectonic compositions with GIS, design researchers can acquire design knowledge that can be used in the creation and refinement of a design.  The research aims to identify and illustrate the potential role of GIS as a tool in landscape design research, so as to provide insight into the possibilities and limitations of using GIS in this capacity. The critical, information-oriented case of Stourhead landscape garden (Wiltshire, UK, an example of a designed landscape that covers the scope and remit of landscape architecture design, forms the heart of the study. The exploration of Stourhead by means of GIS can be understood as a plausibility probe. Here the case study is considered a form of ‘quasi-experiment’, testing the hypothesis and generating a learning process that constitutes a prerequisite for advanced understanding, while using an adjusted version of the framework for landscape design analysis by Steenbergen and Reh (2003. This is a theoretically informed analytical method based on the formal interpretation of the landscape architectonic composition addressing four landscape architectonic categories: the basic, the spatial, the symbolic and the programmatic form. This study includes new aspects to be

Application of a Novel Collaboration Engineering Method for Learning Design: A Case Study

Science.gov (United States)

Cheng, Xusen; Li, Yuanyuan; Sun, Jianshan; Huang, Jianqing

2016-01-01

Collaborative case studies and computer-supported collaborative learning (CSCL) play an important role in the modern education environment. A number of researchers have given significant attention to learning design in order to improve the satisfaction of collaborative learning. Although collaboration engineering (CE) is a mature method widely…

Power for genetic association study of human longevity using the case-control design

DEFF Research Database (Denmark)

Tan, Qihua; Zhao, Jing Hua; Zhang, Dongfeng

2008-01-01

The efficiency of the popular case-control design in gene-longevity association studies needs to be verified because, different from a binary trait, longevity represents only the extreme end of the continuous life span distribution without a clear cutoff for defining the phenotype. In this paper...

Response rates in case-control studies of cancer by era of fieldwork and by characteristics of study design.

Science.gov (United States)

Xu, Mengting; Richardson, Lesley; Campbell, Sally; Pintos, Javier; Siemiatycki, Jack

2018-04-09

The purpose of this study was to describe time trends in response rates in case-control studies of cancer and identify study design factors that influence response rate. We reviewed 370 case-control studies of cancer published in 12 journals during indicator years in each of the last four decades. We estimated time trends of response rates and reasons for nonresponse in each of the following types of study subjects: cases, medical source controls, and population controls. We also estimated response rates according to characteristics of study context. Median response rates among cases and population controls were between 75% and 80% in the 1970s. Between 1971 and 2010, study response rates declined by 0.31% per year for cases and 0.78% for population controls. Only a minority of studies reported reasons for nonparticipation; subject refusal was the most common reported reason. Studies conducted in North America had lower median response rates than studies conducted in Europe. In-person and telephone interviews elicited higher response rates than mail questionnaires. Response rates from case-control studies of cancer have declined, and this could threaten the validity of results derived from these studies. Copyright © 2018 Elsevier Inc. All rights reserved.

Case-Control Studies - An Efficient Observational Study Design

NARCIS (Netherlands)

van Stralen, Karlijn J.; Dekker, Friedo W.; Zoccali, Carmine; Jager, Kitty J.

2010-01-01

Case-control studies are an efficient research method for investigating risk factors of a disease. The method involves the comparison of the odds of exposure in a patient group with that of the odds of exposure in a control group. As only a minority of the population is included in the study, less

A Database Design and Development Case: NanoTEK Networks

Science.gov (United States)

Ballenger, Robert M.

2010-01-01

This case provides a real-world project-oriented case study for students enrolled in a management information systems, database management, or systems analysis and design course in which database design and development are taught. The case consists of a business scenario to provide background information and details of the unique operating…

Applications of ATILA FEM software to smart materials case studies in designing devices

CERN Document Server

Uchino, Kenji

2013-01-01

ATILA Finite Element Method (FEM) software facilitates the modelling and analysis of applications using piezoelectric, magnetostrictor and shape memory materials. It allows entire designs to be constructed, refined and optimized before production begins. Through a range of instructive case studies, Applications of ATILA FEM software to smart materials provides an indispensable guide to the use of this software in the design of effective products.Part one provides an introduction to ATILA FEM software, beginning with an overview of the software code. New capabilities and loss integratio

Comparing Single Case Design Overlap-Based Effect Size Metrics from Studies Examining Speech Generating Device Interventions

Science.gov (United States)

Chen, Mo; Hyppa-Martin, Jolene K.; Reichle, Joe E.; Symons, Frank J.

2016-01-01

Meaningfully synthesizing single case experimental data from intervention studies comprised of individuals with low incidence conditions and generating effect size estimates remains challenging. Seven effect size metrics were compared for single case design (SCD) data focused on teaching speech generating device use to individuals with…

Implementation of an Industrial-Based Case Study as the Basis for a Design Project in an Introduction to Mechanical Design Course

Science.gov (United States)

Lackey, Ellen

2011-01-01

The purpose of this paper is to discuss the implementation of an industrial-based case study as the basis for a design project for the Spring 2009 Introduction to Mechanical Design Course at the University of Mississippi. Course surveys documented the lack of student exposure in classes to the types of projects typically experienced by engineers…

Toward Eco Product Development with Qualitative and CAE Design Process - Case Study of Flame Guiding Module

Science.gov (United States)

Chen, W. L.; Chao, F. L.

2018-04-01

Sustainable products become increasingly important for company in addressing eco-performance to satisfy global environmental regulations. Case study of flame guiding module reviewed design process and concerns related to the torch design. For enhancing flame height, the torch was embedded with an airflow guidance structure. The design process and design methodologies were investigated as an eco-design case study. Combine qualitative and CAE simulation were proposed to fulfil its main and auxiliary functions including reduction of impact during use. The design guidelines help prevent mistake arrangements, CAE helps understand combustion phenomenon. The flow field simulation enables fine tune of geometric design. Functional test and measurement are carried out to confirm the product features. On Eco-performance, we choose 5 items for evaluation the status of previous and redesign module, namely function need, low impact material, few manufacturing steps, low energy consumption, and safety. The radar diagram indicates that eco-performance of redesign module is better. Life cycle assessment calculated the carbon footprint of the manufacturing and processing stage with Eco-it. By using recycled steel in the flame module, it reduces raw material stage carbon footprint significantly.

A Case Study in Collaboration: Looking Back at the National Graphic Design Archive

Science.gov (United States)

Remington, R. Roger

2004-01-01

Inspired by the 1980s interest in graphic design history, an initially productive, but difficult to sustain, collaboration among three American universities from the late 1980s to the mid-1990s, is the subject of this case study. The ideas behind a much-needed archival consortium, its organization and its difficulties in sustaining collaboration…

Study designs may influence results

DEFF Research Database (Denmark)

Johansen, Christoffer; Schüz, Joachim; Andreasen, Anne-Marie Serena

2017-01-01

appeared to show an inverse association, whereas nested case-control and cohort studies showed no association. For allergies, the inverse association was observed irrespective of study design. We recommend that the questionnaire-based case-control design be placed lower in the hierarchy of studies...... for establishing cause-and-effect for diseases such as glioma. We suggest that a state-of-the-art case-control study should, as a minimum, be accompanied by extensive validation of the exposure assessment methods and the representativeness of the study sample with regard to the exposures of interest. Otherwise...

Student Teachers of Technology and Design into Industry: A Northern Ireland Case Study

Science.gov (United States)

Gibson, Ken

2013-01-01

This paper, based in Northern Ireland, is a case study of an innovative programme which places year 3 B.Ed. post-primary student teachers of Technology and Design into industry for a five-day period. The industrial placement programme is set in an international context of evolving pre-service field placements and in a local context defined by the…

Game Coaching System Design and Development: A Retrospective Case Study of FPS Trainer

Science.gov (United States)

Tan, Wee Hoe

2013-01-01

This paper is a retrospective case study of a game-based learning (GBL) researcher who cooperated with a professional gamer and a team of game developers to design and develop a coaching system for First-Person Shooter (FPS) players. The GBL researcher intended to verify the ecological validity of a model of cooperation; the developers wanted to…

Engineering Design Tools for Shape Memory Alloy Actuators: CASMART Collaborative Best Practices and Case Studies

Science.gov (United States)

Wheeler, Robert W.; Benafan, Othmane; Gao, Xiujie; Calkins, Frederick T; Ghanbari, Zahra; Hommer, Garrison; Lagoudas, Dimitris; Petersen, Andrew; Pless, Jennifer M.; Stebner, Aaron P.;

Improving Internal Communication Management in SMEs: Two Case Studies in Service Design

Directory of Open Access Journals (Sweden)

Tuomo Eskelinen

2017-06-01

Full Text Available Effective information management is a success factor for business growth, but small and medium-sized enterprises (SMEs face challenges in transferring knowledge and information from one organizational unit to another. In this study of two case companies, participative business model development processes were designed to identify challenges and solutions in internal communication management. A service design approach based on CIMO logic (context, intervention, mechanism, and output showed that the participative business model technique and process can identify problems and challenges in internal communication management, as well as in the prioritization of actions. The process is a creative service design process including both divergent and convergent phases. The process increased motivation among personnel to find solutions, encouraged communication, and created joint understanding on how to solve problems. The technique helped to bring tacit information into use.

Enhanced ergonomics approaches for product design: a user experience ecosystem perspective and case studies.

Science.gov (United States)

Xu, Wei

2014-01-01

This paper first discusses the major inefficiencies faced in current human factors and ergonomics (HFE) approaches: (1) delivering an optimal end-to-end user experience (UX) to users of a solution across its solution lifecycle stages; (2) strategically influencing the product business and technology capability roadmaps from a UX perspective and (3) proactively identifying new market opportunities and influencing the platform architecture capabilities on which the UX of end products relies. In response to these challenges, three case studies are presented to demonstrate how enhanced ergonomics design approaches have effectively addressed the challenges faced in current HFE approaches. Then, the enhanced ergonomics design approaches are conceptualised by a user-experience ecosystem (UXE) framework, from a UX ecosystem perspective. Finally, evidence supporting the UXE, the advantage and the formalised process for executing UXE and methodological considerations are discussed. Practitioner Summary: This paper presents enhanced ergonomics approaches to product design via three case studies to effectively address current HFE challenges by leveraging a systematic end-to-end UX approach, UX roadmaps and emerging UX associated with prioritised user needs and usages. Thus, HFE professionals can be more strategic, creative and influential.

Virtual patients: the influence of case design and teamwork on students' perception and knowledge - a pilot study.

Science.gov (United States)

Jäger, Frederik; Riemer, Martin; Abendroth, Martin; Sehner, Susanne; Harendza, Sigrid

2014-07-08

Virtual patient (VP) cases are an effective teaching method, although little is known about how to design and implement them for maximum effectiveness. The aim of this study was to explore the effect of case design and teamwork on students' learning outcome. One hundred forty-six undergraduate medical students participated in a mandatory medical computer science course consisting of five seminars. At the end of each seminar, they worked on one VP case, either in teams of two or individually. Each student filled out an introductory and a final survey and a feedback sheet after completing each case. Additionally, there was a surprise multiple choice (MC) test after the last seminar with three questions regarding each case. Students with more clinical experience and students who had worked in a team performed significantly better on MC questions. Students with less clinical experience more frequently used information which had been positioned less prominently on the case material. Certain aspects of case design were rated more positively by students who had an interest in e-learning. In general, students preferred to work on cases for less than 15 minutes. Clinically more advanced students and students working with a partner seem to benefit most from short VP cases with prominently presented information.

Case study B. Architectural design management using a project web

NARCIS (Netherlands)

DeClerck, F.; Pels, H.J.; Otter, den A.F.H.J.; Emmitt, S.; Prins, M.; Otter, den A.F.

2009-01-01

In this chapter the use and organization of use of a project website is described in the design and realization of a construction project. The case concerns a complicated project with a high number of different parties involved, managed by an architectural office and having an internationally

Using case study within a sequential explanatory design to evaluate the impact of specialist and advanced practice roles on clinical outcomes: the SCAPE study.

Science.gov (United States)

Lalor, Joan G; Casey, Dympna; Elliott, Naomi; Coyne, Imelda; Comiskey, Catherine; Higgins, Agnes; Murphy, Kathy; Devane, Declan; Begley, Cecily

2013-04-08

The role of the clinical nurse/midwife specialist and advanced nurse/midwife practitioner is complex not least because of the diversity in how the roles are operationalised across health settings and within multidisciplinary teams. This aim of this paper is to use The SCAPE Study: Specialist Clinical and Advanced Practitioner Evaluation in Ireland to illustrate how case study was used to strengthen a Sequential Explanatory Design. In Phase 1, clinicians identified indicators of specialist and advanced practice which were then used to guide the instrumental case study design which formed the second phase of the larger study. Phase 2 used matched case studies to evaluate the effectiveness of specialist and advanced practitioners on clinical outcomes for service users. Data were collected through observation, documentary analysis, and interviews. Observations were made of 23 Clinical Specialists or Advanced Practitioners, and 23 matched clinicians in similar matched non-postholding sites, while they delivered care. Forty-one service users, 41 clinicians, and 23 Directors of Nursing or Midwifery were interviewed, and 279 service users completed a survey based on the components of CS and AP practice identified in Phase 1. A coding framework, and the generation of cross tabulation matrices in NVivo, was used to make explicit how the outcome measures were confirmed and validated from multiple sources. This strengthened the potential to examine single cases that seemed 'different', and allowed for cases to be redefined. Phase 3 involved interviews with policy-makers to set the findings in context. Case study is a powerful research strategy to use within sequential explanatory mixed method designs, and adds completeness to the exploration of complex issues in clinical practice. The design is flexible, allowing the use of multiple data collection methods from both qualitative and quantitative paradigms. Multiple approaches to data collection are needed to evaluate the impact

Analysis of Clinical Cohort Data Using Nested Case-control and Case-cohort Sampling Designs. A Powerful and Economical Tool.

Science.gov (United States)

Ohneberg, K; Wolkewitz, M; Beyersmann, J; Palomar-Martinez, M; Olaechea-Astigarraga, P; Alvarez-Lerma, F; Schumacher, M

2015-01-01

Sampling from a large cohort in order to derive a subsample that would be sufficient for statistical analysis is a frequently used method for handling large data sets in epidemiological studies with limited resources for exposure measurement. For clinical studies however, when interest is in the influence of a potential risk factor, cohort studies are often the first choice with all individuals entering the analysis. Our aim is to close the gap between epidemiological and clinical studies with respect to design and power considerations. Schoenfeld's formula for the number of events required for a Cox' proportional hazards model is fundamental. Our objective is to compare the power of analyzing the full cohort and the power of a nested case-control and a case-cohort design. We compare formulas for power for sampling designs and cohort studies. In our data example we simultaneously apply a nested case-control design with a varying number of controls matched to each case, a case cohort design with varying subcohort size, a random subsample and a full cohort analysis. For each design we calculate the standard error for estimated regression coefficients and the mean number of distinct persons, for whom covariate information is required. The formula for the power of a nested case-control design and the power of a case-cohort design is directly connected to the power of a cohort study using the well known Schoenfeld formula. The loss in precision of parameter estimates is relatively small compared to the saving in resources. Nested case-control and case-cohort studies, but not random subsamples yield an attractive alternative for analyzing clinical studies in the situation of a low event rate. Power calculations can be conducted straightforwardly to quantify the loss of power compared to the savings in the num-ber of patients using a sampling design instead of analyzing the full cohort.

Repository design sensitivity study: Engineering study report

International Nuclear Information System (INIS)

1987-01-01

A preliminary sensitivity study of the salt repository design has been performed to identify critical site and design parameters to help guide future site characterization and design optimization activities. The study considered the SCP-conceptual design at the Deaf Smith County site in Texas with the horizontal waste package emplacement mode as the base case. Relative to this base case, parameter variations were compared. Limited studies were performed which considered the vertical emplacement mode geometry. The report presents the reference data base and design parameters on which the study was based (including the range of parameters that might be expected). Detailed descriptions of the numerical modeling methods and assumptions are included for the thermal, thermomechanical and hydrogeological analyses. The impacts of parameter variations on the sensitivity of the rock mass response are discussed. Recommendations are provided to help guide site characterization activities and advanced conceptual design optimization activities. 47 refs., 119 refs., 22 tabs

Developing effective web-based regional anesthesia education: a randomized study evaluating case-based versus non-case-based module design.

Science.gov (United States)

Kopp, Sandra L; Smith, Hugh M

2011-01-01

Little is known about the use of Web-based education in regional anesthesia training. Benefits of Web-based education include the ability to standardize learning material quality and content, build appropriate learning progressions, use interactive multimedia technologies, and individualize delivery of course materials. The goals of this investigation were (1) to determine whether module design influences regional anesthesia knowledge acquisition, (2) to characterize learner preference patterns among anesthesia residents, and (3) to determine whether learner preferences play a role in knowledge acquisition. Direct comparison of knowledge assessments, learning styles, and learner preferences will be made between an interactive case-based and a traditional textbook-style module design. Forty-three Mayo Clinic anesthesiology residents completed 2 online modules, a knowledge pretest, posttest, an Index of Learning Styles assessment, and a participant satisfaction survey. Interscalene and lumbar plexus regional techniques were selected as the learning content for 4 Web modules constructed using the Blackboard Vista coursework application. One traditional textbook-style module and 1 interactive case-based module were designed for each of the interscalene and lumbar plexus techniques. Participants scored higher on the postmodule knowledge assessment for both of the interscalene and lumbar plexus modules. Postmodule knowledge performance scores were independent of both module design (interactive case-based versus traditional textbook style) and learning style preferences. However, nearly all participants reported a preference for Web-based learning and believe that it should be used in anesthesia resident education. Participants did not feel that Web-base learning should replace the current lecture-based curriculum. All residents scored higher on the postmodule knowledge assessment, but this improvement was independent of the module design and individual learning styles

Designed for Learning: A Case Study in Rethinking Teaching and Learning for a Large First Year Class

Science.gov (United States)

Goldacre, Lisa; Bolt, Susan; Lambiris, Michael

2013-01-01

This paper presents a case study in which the principles of scholarship were applied to designing an approach to learning suitable for large classes. While this case study describes an Australian first year Business Law unit, the findings presented in this paper would be relevant to a wide range of teachers faced with large enrollments in first…

A case study on better iconographic design in electronic medical records' user interface.

Science.gov (United States)

Tasa, Umut Burcu; Ozcan, Oguzhan; Yantac, Asim Evren; Unluer, Ayca

2008-06-01

It is a known fact that there is a conflict between what users expect and what user interface designers create in the field of medical informatics along with other fields of interface design. The objective of the study is to suggest, from the 'design art' perspective, a method for improving the usability of an electronic medical record (EMR) interface. The suggestion is based on the hypothesis that the user interface of an EMR should be iconographic. The proposed three-step method consists of a questionnaire survey on how hospital users perceive concepts/terms that are going to be used in the EMR user interface. Then icons associated with the terms are designed by a designer, following a guideline which is prepared according to the results of the first questionnaire. Finally the icons are asked back to the target group for proof. A case study was conducted with 64 medical staff and 30 professional designers for the first questionnaire, and with 30 medical staff for the second. In the second questionnaire 7.53 icons out of 10 were matched correctly with a standard deviation of 0.98. Also, all icons except three were matched correctly in at least 83.3% of the forms. The proposed new method differs from the majority of previous studies which are based on user requirements by leaning on user experiments instead. The study demonstrated that the user interface of EMRs should be designed according to a guideline that results from a survey on users' experiences on metaphoric perception of the terms.

Advantages of the nested case-control design in diagnostic research

Directory of Open Access Journals (Sweden)

Hoes Arno W

2008-07-01

Full Text Available Abstract Background Despite its benefits, it is uncommon to apply the nested case-control design in diagnostic research. We aim to show advantages of this design for diagnostic accuracy studies. Methods We used data from a full cross-sectional diagnostic study comprising a cohort of 1295 consecutive patients who were selected on their suspicion of having deep vein thrombosis (DVT. We draw nested case-control samples from the full study population with case:control ratios of 1:1, 1:2, 1:3 and 1:4 (per ratio 100 samples were taken. We calculated diagnostic accuracy estimates for two tests that are used to detect DVT in clinical practice. Results Estimates of diagnostic accuracy in the nested case-control samples were very similar to those in the full study population. For example, for each case:control ratio, the positive predictive value of the D-dimer test was 0.30 in the full study population and 0.30 in the nested case-control samples (median of the 100 samples. As expected, variability of the estimates decreased with increasing sample size. Conclusion Our findings support the view that the nested case-control study is a valid and efficient design for diagnostic studies and should also be (reappraised in current guidelines on diagnostic accuracy research.

Design and construction strategies for reducing embodied impacts from buildings – Case study analysis

DEFF Research Database (Denmark)

Malmqvist, Tove; Nehasilova, Marie; Moncaster, Alice

2018-01-01

, individual building projects. This is done by a systematic analysis of the Annex 57 case study collection as well as additional scientific literature. While it should be noted that the actual EEG savings at building level illustrated in this collection of studies are only applicable to each specific case...... of national energy mixes. Stakeholders therefore have a growing interest in understanding the possibilities for reducing em- bodied impacts in buildings. In the IEA EBC project ‘Annex 57’ a broad call for case studies was launched with the aim to identify design strategies for reducing embodied energy and GHG...... emissions (EEG) from buildings. The aim of this paper is to identify and provide a collected and comprehensive overview of quantitative reduction potentials of the particular EEG reduction strategies which should be considered by the stakeholders engaged in, and with the capacity to influence the outcome of...

Case Studies of Secondary School Teachers Designing Socioscientific Issues-Based Instruction and Their Students' Socioscientific Reasoning

Science.gov (United States)

Karahan, Engin

Addressing socioscientific issues (SSI) has been one of the main focuses in science education since the Science, Technology, and Society (STS) movement in the 1970s (Levinson, 2006); however, teaching controversial socioscientific issues has always been challenging for teachers (Dillon, 1994; Osborne, Duschl, & Fairbrother, 2002). Although teachers exhibit positive attitudes for using controversial socioscientific issues in their science classrooms, only a small percentage of them actually incorporate SSI content into their science curricula on a regular basis (Sadler, Amirshokoohi, Kazempour, & Allspaw, 2006; Lee & Witz, 2009). The literature in science education has highlighted the signi?cant relationships among teacher beliefs, teaching practices, and student learning (Bryan & Atwater, 2002; King, Shumow, & Lietz, 2001; Lederman, 1992). Despite the fact that the case studies present a relatively detailed picture of teachers' values and motivations for teaching SSI (e.g. Lee, 2006; Lee & Witz, 2009; Reis & Galvao, 2004), these studies still miss the practices of these teachers and potential outcomes for their students. Therefore, there is a great need for in-depth case studies that would focus on teachers' practices of designing and teaching SSI-based learning environments, their deeper beliefs and motivations for teaching SSI, and their students' response to these practices (Lee, 2006). This dissertation is structured as three separate, but related, studies about secondary school teachers' experiences of designing and teaching SSI-based classes and their students' understanding of science and SSI reasoning. The case studies in this dissertation seek answers for (1) teachers' practices of designing and teaching SSI-based instruction, as well as its relation to their deeper personal beliefs and motivations to teach SSI, and (2) how their students respond to their approaches of teaching SSI in terms of their science understanding and SSI reasoning. The first paper

Transit Network Design: a Hybrid Enhanced Artificial Bee Colony Approach and a Case Study

Directory of Open Access Journals (Sweden)

Y. Jiang

2013-09-01

Full Text Available A bus network design problem in a suburban area of Hong Kong is studied. The objective is to minimize the weighted sum of the number of transfers and the total travel time of passengers by restructuring bus routes and determining new frequencies. A mixed integer optimization model is developed and was solved by a Hybrid Enhanced Artificial Bee Colony algorithm (HEABC. A case study was conducted to investigate the effects of different design parameters, including the total number of bus routes available, the maximum route duration within the study area and the maximum allowable number of bus routes that originated from each terminal. The model and results are useful for improving bus service policies.

Buffer Size Design in Pharmaceutical Packaging Lines: an Analytical Methodology Proposal and Case Study

Directory of Open Access Journals (Sweden)

Miriam Benedetti

2014-11-01

increasing overall equipment effectiveness (OEE of production lines (activities that had previously been somewhat neglected in the pharmaceutical sector. In this paper, the paradigm of buffer design for availability (BDFA - an approach developed to conciliate these apparently conflicting strategies to achieve performance improvement and cost reduction - is briefly recalled and discussed, being contextualized in the state-of-the-art of buffer design research. Its valuable practical applicability and effectiveness is then demonstrated by the means of a real case study application, and future developments are eventually presented.

[Case-non case studies: Principles, methods, bias and interpretation].

Science.gov (United States)

Faillie, Jean-Luc

2017-10-31

Case-non case studies belongs to the methods assessing drug safety by analyzing the disproportionality of notifications of adverse drug reactions in pharmacovigilance databases. Used for the first time in the 1980s, the last few decades have seen a significant increase in the use of this design. The principle of the case-non case study is to compare drug exposure in cases of a studied adverse reaction with that of cases of other reported adverse reactions and called "non cases". Results are presented in the form of a reporting odds ratio (ROR), the interpretation of which makes it possible to identify drug safety signals. This article describes the principle of the case-non case study, the method of calculating the ROR and its confidence interval, the different modalities of analysis and how to interpret its results with regard to the advantages and limitations of this design. Copyright © 2017 Société française de pharmacologie et de thérapeutique. Published by Elsevier Masson SAS. All rights reserved.

ASRM case insulation design and development

Science.gov (United States)

Bell, Matthew S.; Tam, William F. S.

1992-10-01

This paper describes the achievements made on the Advanced Solid Rocket Motor (ASRM) case insulation design and development program. The ASRM case insulation system described herein protects the metal case and joints from direct radiation and hot gas impingement. Critical failure of solid rocket systems is often traceable to failure of the insulation design. The wide ranging accomplishments included the development of a nonasbestos insulation material for ASRM that replaced the existing Redesigned Solid Rocket Motor (RSRM) asbestos-filled nitrile butadiene rubber (NBR) along with a performance gain of 300 pounds, and improved reliability of all the insulation joint designs, i.e., segmented case joint, case-to-nozzle and case-to-igniter joint. The insulation process development program included the internal stripwinding process. This process advancement allowed Aerojet to match to exceed the capability of other propulsion companies.

Low-cost housing design and provision: A case study of Kenya

Science.gov (United States)

Kabo, Felichism W.

Shelter is as basic a human need as food and water. Today, many people in Third World countries live in sub-standard housing, or lack shelter altogether. Prior research addresses either one of two housing dimensions: broader provision processes, or specific aspects of design. This dissertation is an effort at addressing both dimensions, the underlying premise being that their inter-connectedness demands an integrative approach. More specifically, this dissertation is a combined strategy case study of housing design and provision in Kenya, a sub-Saharan African country with serious shelter problems. A majority of Kenya's urban population lives in slums or squatter settlements. This dissertation covers four major areas of housing design and provision in Kenya: building materials, user preferences for building materials and housing designs, interior layouts, and the organizational context of the housing sector. These four areas are theoretically unified by Canter's (1977) model of place. Each of the first three areas (housing design) relates to one or more of the three domains in the model. The fourth area (housing provision) pertains to the model's context and framework. The technical building materials research reveals the feasibility of making low-cost materials (soil-cements) with satisfactory engineering performance. The research in preference for building materials reveals that the two independent variables, soil and mix, have a significant effect on potential users' ratings. The housing preference study reveals that of the four independent variables, design and type had a significant effect on potential users' ratings, while materials and construction method did not have a significant effect. The interior layout studies reveal important associations between spatial configurations and a key space (the kitchen), and between configuration and conceptualizations of living, cooking, and sleeping spaces. The findings from the studies of preferences and interior

Case-positive versus case-negative designs for low-rate lithium thionyl chloride cells

Science.gov (United States)

Mahy, T. X.

1982-03-01

Case polarity design choices are discussed. Two examples of case-negative designs are presented. One battery is thionyl chloride limited and the other is lithium limited. The case-positive design is thionyl chloride limited. It is found that the case-positive/case-negative design consideration does not seem to have much bearing on storage. However, during low rate discharge, the case-negative cells show a steadily decreasing capacity as you go to lower and lower rates.

Design thinking for website optimization. A case study

DEFF Research Database (Denmark)

Somoza Sanchez, Vella Veronica; Andersen, Frederik; Schneider-Kamp, Peter

This paper presents results from a pilot study, which is part of a larger research project where we study the process innovation of website optimization as a service through the use of big data. Over a process of design thinking we investigate which type of website design best addresses the needs...... for observing the users in their native environment. Furthermore, we use the method of Digital Anthropology to complete the loop between the human-centric designs and the possibilities offered by the analysis of big data....

Bias correction of risk estimates in vaccine safety studies with rare adverse events using a self-controlled case series design.

Science.gov (United States)

Zeng, Chan; Newcomer, Sophia R; Glanz, Jason M; Shoup, Jo Ann; Daley, Matthew F; Hambidge, Simon J; Xu, Stanley

2013-12-15

The self-controlled case series (SCCS) method is often used to examine the temporal association between vaccination and adverse events using only data from patients who experienced such events. Conditional Poisson regression models are used to estimate incidence rate ratios, and these models perform well with large or medium-sized case samples. However, in some vaccine safety studies, the adverse events studied are rare and the maximum likelihood estimates may be biased. Several bias correction methods have been examined in case-control studies using conditional logistic regression, but none of these methods have been evaluated in studies using the SCCS design. In this study, we used simulations to evaluate 2 bias correction approaches-the Firth penalized maximum likelihood method and Cordeiro and McCullagh's bias reduction after maximum likelihood estimation-with small sample sizes in studies using the SCCS design. The simulations showed that the bias under the SCCS design with a small number of cases can be large and is also sensitive to a short risk period. The Firth correction method provides finite and less biased estimates than the maximum likelihood method and Cordeiro and McCullagh's method. However, limitations still exist when the risk period in the SCCS design is short relative to the entire observation period.

Virtual patients: the influence of case design and teamwork on students’ perception and knowledge – a pilot study

Science.gov (United States)

2014-01-01

Background Virtual patient (VP) cases are an effective teaching method, although little is known about how to design and implement them for maximum effectiveness. The aim of this study was to explore the effect of case design and teamwork on students’ learning outcome. Methods One hundred forty-six undergraduate medical students participated in a mandatory medical computer science course consisting of five seminars. At the end of each seminar, they worked on one VP case, either in teams of two or individually. Each student filled out an introductory and a final survey and a feedback sheet after completing each case. Additionally, there was a surprise multiple choice (MC) test after the last seminar with three questions regarding each case. Results Students with more clinical experience and students who had worked in a team performed significantly better on MC questions. Students with less clinical experience more frequently used information which had been positioned less prominently on the case material. Certain aspects of case design were rated more positively by students who had an interest in e-learning. In general, students preferred to work on cases for less than 15 minutes. Conclusions Clinically more advanced students and students working with a partner seem to benefit most from short VP cases with prominently presented information. PMID:25000965

The Role of Re-Appropriation in Open Design: A Case Study on How Openness in Higher Education for Industrial Design Engineering Can Trigger Global Discussions on the Theme of Urban Gardening

Science.gov (United States)

Ostuzzi, Francesca; Conradie, Peter; De Couvreur, Lieven; Detand, Jan; Saldien, Jelle

2016-01-01

This case study explores the opportunities for students of Industrial Design Engineering to engage with direct and indirect stakeholders by making their design process and results into open-ended designed solutions. The reported case study involved 47 students during a two-weeks intensive course on the topic of urban gardening. Observations were…

Interior Design Supports Art Education: A Case Study

Science.gov (United States)

Clemons, Stephanie A.

2006-01-01

Interior design, as a field of study, is a rapidly growing area of interest--particularly for teenagers in the United States. Part of this interest stems from the proliferation of design-related reality shows available through television media. Some art educators and curriculum specialists in the nation perceive the study of interior spaces as a…

Symphony: A case study for exploring and describing design methods and guidelines for learner-centered design

Science.gov (United States)

Quintana, Christopher

Learner-centered design is an evolving software design perspective addressing the needs of learners---a specific audience trying to work in and understand new work practices in which they have a novice or naive understanding. Learner-centered design involves designing software that incorporates work support features (or scaffolding features) informed by social constructivist learning theories. By adopting a constructivist "learning by doing" perspective, scaffolds should support learners so they can mindfully engage in previously inaccessible work activity, which in turn allows those learners to progressively gain a better understanding of the new work. While there is an intuitive notion of "learner-centered design", there is less specific design information for developing learner-centered software. As a result, learner-centered software results from "educated guesses" and ad-hoc design approaches rather than from systematic design methods. Thus there is a need for specific design guidance to facilitate the development of learner-centered tools that help learners see the tasks, terminology, tools, etc. in the new work context and engage in that work. The research in this dissertation provides a more specific base of learner-centered design descriptions, methods, and guidelines to analyze work practices and design and evaluate scaffolds. The research approach involves using the development of Symphony---a scaffolded integrated tool environment for high-school students learning the work of computational science inquiry---as a case study to develop the learner-centered design approach. Symphony incorporates a variety of science tools with process scaffolding to support students in performing complex air pollution investigations. Six ninth-grade students used Symphony to investigate air quality questions for several weeks in an environmental science class. The student testing helped assess the effectiveness of the software scaffolding and in turn, the learner

A Case Study on Collective Cognition and Operation in Team-Based Computer Game Design by Middle-School Children

Science.gov (United States)

Ke, Fengfeng; Im, Tami

2014-01-01

This case study examined team-based computer-game design efforts by children with diverse abilities to explore the nature of their collective design actions and cognitive processes. Ten teams of middle-school children, with a high percentage of minority students, participated in a 6-weeks, computer-assisted math-game-design program. Essential…

Developing Tools to Counteract and Prevent Suicide Bomber Incidents: A Case Study in Value Sensitive Design.

Science.gov (United States)

Royakkers, Lambèr; Steen, Marc

2017-08-01

Developers and designers make all sorts of moral decisions throughout an innovation project. In this article, we describe how teams of developers and designers engaged with ethics in the early phases of innovation based on case studies in the SUBCOP project (SUBCOP stands for 'SUicide Bomber COunteraction and Prevention'). For that purpose, Value Sensitive Design (VSD) will be used as a reference. Specifically, we focus on the following two research questions: How can researchers/developers learn about users' perspectives and values during the innovation process? and How can researchers/developers take into account these values, and related design criteria, in their decision-making during the innovation process? Based on a case study of several innovation processes in this project, we conclude the researchers/developers involved are able to do something similar to VSD (without them knowing about VSD or calling it 'VSD'), supported by relatively simple exercises in the project, e.g., meetings with potential end-users and discussions with members of the Ethical Advisory Board of the project. Furthermore, we also found-possibly somewhat counterintuitively-that a commercial, with its focus on understanding and satisfying customers' needs, can promote VSD.

A comparison of Cox and logistic regression for use in genome-wide association studies of cohort and case-cohort design.

Science.gov (United States)

Staley, James R; Jones, Edmund; Kaptoge, Stephen; Butterworth, Adam S; Sweeting, Michael J; Wood, Angela M; Howson, Joanna M M

2017-06-01

Logistic regression is often used instead of Cox regression to analyse genome-wide association studies (GWAS) of single-nucleotide polymorphisms (SNPs) and disease outcomes with cohort and case-cohort designs, as it is less computationally expensive. Although Cox and logistic regression models have been compared previously in cohort studies, this work does not completely cover the GWAS setting nor extend to the case-cohort study design. Here, we evaluated Cox and logistic regression applied to cohort and case-cohort genetic association studies using simulated data and genetic data from the EPIC-CVD study. In the cohort setting, there was a modest improvement in power to detect SNP-disease associations using Cox regression compared with logistic regression, which increased as the disease incidence increased. In contrast, logistic regression had more power than (Prentice weighted) Cox regression in the case-cohort setting. Logistic regression yielded inflated effect estimates (assuming the hazard ratio is the underlying measure of association) for both study designs, especially for SNPs with greater effect on disease. Given logistic regression is substantially more computationally efficient than Cox regression in both settings, we propose a two-step approach to GWAS in cohort and case-cohort studies. First to analyse all SNPs with logistic regression to identify associated variants below a pre-defined P-value threshold, and second to fit Cox regression (appropriately weighted in case-cohort studies) to those identified SNPs to ensure accurate estimation of association with disease.

Innovative wetland reclamation design case studies : the Suncor fen and pond 1 marsh

Energy Technology Data Exchange (ETDEWEB)

Daly, C.A. [Suncor Energy, Fort McMurray, AB (Canada); Price, J.; Rezanezhad, F. [Waterloo Univ., ON (Canada); Rochefort, L.; Graf, M. [Laval Univ., Quebec City, PQ (Canada); Russell, B. [BGC Engineering Inc., Calgary, AB (Canada)

2010-07-01

Suncor Energy Inc. is an energy company strategically focused in Canada's Athabasca oil sands region. The company has more than 40 years of experience in pioneering commercial development. This presentation discussed reclamation requirements for Suncor Energy. Reclamation objectives that were addressed in this presentation included operating approvals, biodiversity and meeting stakeholder expectations. Several photographs of reclaimed forest areas were shown along with 5 freshwater wetland types and wetland values. Two innovative wetland reclamation design case studies were also presented, described and illustrated, with particular reference to the Suncor fen and pond 1 marsh. It was concluded that future work will involve finalizing site investigation and designs, as well as construction, vegetation, and monitoring. figs.

Making Design Decisions Visible: Applying the Case-Based Method in Designing Online Instruction

Directory of Open Access Journals (Sweden)

Heng Luo,

2011-01-01

Full Text Available The instructional intervention in this design case is a self-directed online tutorial that applies the case-based method to teach educators how to design and conduct entrepreneurship programs for elementary school students. In this article, the authors describe the major decisions made in each phase of the design and development process, explicate the rationales behind them, and demonstrate their effect on the production of the tutorial. Based on such analysis, the guidelines for designing case-based online instruction are summarized for the design case.

How design-inclusive UXR influenced the integration of project activities. Three design cases from industry

NARCIS (Netherlands)

van Kollenburg, J.W.M.; Bogers, S.J.A.; Deckers, E.J.L.; Frens, J.W.; Hummels, C.C.M.

2017-01-01

In this paper, we discuss how the implementation of design-inclusive User Experience Research (UXR) has influenced the composition of UXR and design activities in the industrial setting of Philips Design. We present three design case studies that were executed in a time span of three years: a baby

Designing for Nomadic Play: A case study of participatory design with children

DEFF Research Database (Denmark)

Brynskov, Martin; Christensen, Bent Guldbjerg; Ludvigsen, Martin

This poster presents the results from an empirical probe study trying to engage children creatively in the design process of systems and artifacts that support nomadic life-style. Based on observational studies and interviews with children of different ages (5-15 years), we conducted a participat......This poster presents the results from an empirical probe study trying to engage children creatively in the design process of systems and artifacts that support nomadic life-style. Based on observational studies and interviews with children of different ages (5-15 years), we conducted...... a participatory design workshop cycle where children were encouraged to envision and virtually play with not-yet-invented future technology. Findings include qualitative characterizations of children’s activities (e.g. ‘play’ culture, use of digital media, age and gender differences, relation to space...

Instructional Design, Facilitation, and Perceived Learning Outcomes: An Exploratory Case Study of a Human Trafficking MOOC for Attitudinal Change

Science.gov (United States)

Watson, Sunnie Lee; Loizzo, Jamie; Watson, William R.; Mueller, Chad; Lim, Jieun; Ertmer, Peggy A.

2016-01-01

This exploratory case study describes the design and facilitation of a massive open online course (MOOC) for attitudinal change regarding human trafficking. It examines the course from the learners', instructor's, and instructional designer's perspectives. Two interviews with the instructor and instructional designer were conducted, and data from…

Objectivist case study research

DEFF Research Database (Denmark)

Ridder, Hanne Mette Ochsner; Fachner, Jörg

2016-01-01

be achieved through the use of objectivist case study research. The strength of the case study design is that it allows for uncovering or suggesting causal relationships in real-life settings through an intensive and rich collection of data. According to Hilliard (1993), the opposite applies for extensive......In order to comprehend the impact of music therapy or music therapy processes, a researcher might look for an approach where the topic under investigation can be understood within a broader context. This calls for a rich inclusion of data and consequently a limited number of participants and may...... designs, in which a small amount of data is gathered on a large number of subjects. With the richness of data, the intensive design is ―the primary pragmatic reason for engaging in single-case or small N research‖ (p. 374) and for working from an idiographic rather than a nomothetic perspective....

REGENERATIVE DESIGN PRACTICES IN NIGERIA: A CASE ...

African Journals Online (AJOL)

User

2017-07-01

Jul 1, 2017 ... a view to effectively implement the concept within the study area. ... REGENERATIVE DESIGN PRACTICES IN NIGERIA: A CASE STUDY OF NGOZIKA HOUSING .... could mean greater acceptance of new development by the public and .... human/environment relations based on the Cartesian separation of ...

Reliability-based load and resistance factor design for piping: an exploratory case study

International Nuclear Information System (INIS)

Gupta, Abhinav; Choi, Byounghoan

2003-01-01

This paper presents an exploratory case study on the application of Load and Resistance Factor Design (LRFD) approach to the Section III of ASME Boiler and Pressure Vessel code for piping design. The failure criterion for defining the performance function is considered as plastic instability. Presently used design equation is calibrated by evaluating the minimum reliability levels associated with it. If the target reliability in the LRFD approach is same as that evaluated for the presently used design equation, it is shown that the total safety factors for the two design equations are identical. It is observed that the load and resistance factors are not dependent upon the diameter to thickness ratio. A sensitivity analysis is also conducted to study the variations in the load and resistance factors due to changes in (a) coefficients of variation for pressure, moment, and ultimate stress, (b) ratio of mean design pressure to mean design moment, (c) distribution types used for characterizing the random variables, and (d) statistical correlation between random variables. It is observed that characterization of random variables by log-normal distribution is reasonable. Consideration of statistical correlation between the ultimate stress and section modulus gives higher values of the load factor for pressure but lower value for the moment than the corresponding values obtained by considering the variables to be uncorrelated. Since the effect of statistical correlation on the load and resistance factors is relatively insignificant for target reliability values of practical interest, the effect of correlated variables may be neglected

Design Flow Instantiation for Run-Time Reconfigurable Systems: A Case Study

Directory of Open Access Journals (Sweden)

Yang Qu

2007-12-01

Full Text Available Reconfigurable system is a promising alternative to deliver both flexibility and performance at the same time. New reconfigurable technologies and technology-dependent tools have been developed, but a complete overview of the whole design flow for run-time reconfigurable systems is missing. In this work, we present a design flow instantiation for such systems using a real-life application. The design flow is roughly divided into two parts: system level and implementation. At system level, our supports for hardware resource estimation and performance evaluation are applied. At implementation level, technology-dependent tools are used to realize the run-time reconfiguration. The design case is part of a WCDMA decoder on a commercially available reconfigurable platform. The results show that using run-time reconfiguration can save over 40% area when compared to a functionally equivalent fixed system and achieve 30 times speedup in processing time when compared to a functionally equivalent pure software design.

The Impact of School Design and Arrangement on Learning Experiences: A Case Study of an Architecturally Significant Elementary School

Science.gov (United States)

Churchill, Deirdre Lyne

2014-01-01

This qualitative study examined the impact of architectural design and arrangement on the learning experiences of students. Specifically, it examined how school design and arrangement foster interactions and relationships among students and adults relevant to integral learning experiences. This case study was limited to the breadth of knowledge…

Supporting More Inclusive Learning with Social Networking: A Case Study of Blended Socialised Design Education

Science.gov (United States)

Rodrigo, Russell; Nguyen, Tam

2013-01-01

This paper presents a qualitative case study of socialised blended learning, using a social network platform to investigate the level of literacies and interactions of students in a blended learning environment of traditional face-to-face design studio and online participatory teaching. Using student and staff feedback, the paper examines the use…

JPL Thermal Design Modeling Philosophy and NASA-STD-7009 Standard for Models and Simulations - A Case Study

Science.gov (United States)

Avila, Arturo

2011-01-01

The Standard JPL thermal engineering practice prescribes worst-case methodologies for design. In this process, environmental and key uncertain thermal parameters (e.g., thermal blanket performance, interface conductance, optical properties) are stacked in a worst case fashion to yield the most hot- or cold-biased temperature. Thus, these simulations would represent the upper and lower bounds. This, effectively, represents JPL thermal design margin philosophy. Uncertainty in the margins and the absolute temperatures is usually estimated by sensitivity analyses and/or by comparing the worst-case results with "expected" results. Applicability of the analytical model for specific design purposes along with any temperature requirement violations are documented in peer and project design review material. In 2008, NASA released NASA-STD-7009, Standard for Models and Simulations. The scope of this standard covers the development and maintenance of models, the operation of simulations, the analysis of the results, training, recommended practices, the assessment of the Modeling and Simulation (M&S) credibility, and the reporting of the M&S results. The Mars Exploration Rover (MER) project thermal control system M&S activity was chosen as a case study determining whether JPL practice is in line with the standard and to identify areas of non-compliance. This paper summarizes the results and makes recommendations regarding the application of this standard to JPL thermal M&S practices.

Case Study of Online Banking in India: User Behaviors and Design Guidelines

Science.gov (United States)

Iyengar, Jhumkee; Belvalkar, Manisha

This paper documents online banking trends, behaviors and expectations of Indian consumers and banks. It is based on excerpts of a large industry case study of users from 4 leading banks. While banks view online banking essentially as a technology solution, it is a relatively new area for Indian consumers and not yet self-supporting. Being a savings based culture still, Indian consumers are cautious about their financial assets. They are also relatively recent entrants to internet based services. Design of these systems must therefore be based on an understanding of these users' outlook and priorities through task centric, security assured and service oriented solutions minus the technological challenges. Design lessons suggest viewing online banking not just as a convenience alone anymore but beyond it, to provide service, simplicity and security. This will create satisfied online banking customers and therefore profitability for the bank.

The effect of a loss of model structural detail due to network skeletonization on contamination warning system design: case studies

Science.gov (United States)

Davis, Michael J.; Janke, Robert

2018-05-01

The effect of limitations in the structural detail available in a network model on contamination warning system (CWS) design was examined in case studies using the original and skeletonized network models for two water distribution systems (WDSs). The skeletonized models were used as proxies for incomplete network models. CWS designs were developed by optimizing sensor placements for worst-case and mean-case contamination events. Designs developed using the skeletonized network models were transplanted into the original network model for evaluation. CWS performance was defined as the number of people who ingest more than some quantity of a contaminant in tap water before the CWS detects the presence of contamination. Lack of structural detail in a network model can result in CWS designs that (1) provide considerably less protection against worst-case contamination events than that obtained when a more complete network model is available and (2) yield substantial underestimates of the consequences associated with a contamination event. Nevertheless, CWSs developed using skeletonized network models can provide useful reductions in consequences for contaminants whose effects are not localized near the injection location. Mean-case designs can yield worst-case performances similar to those for worst-case designs when there is uncertainty in the network model. Improvements in network models for WDSs have the potential to yield significant improvements in CWS designs as well as more realistic evaluations of those designs. Although such improvements would be expected to yield improved CWS performance, the expected improvements in CWS performance have not been quantified previously. The results presented here should be useful to those responsible for the design or implementation of CWSs, particularly managers and engineers in water utilities, and encourage the development of improved network models.

Contradictions of Designing with Building Information Modelling - A Case Study with an Activity Theory Perspective

DEFF Research Database (Denmark)

Gade, Peter; Gade, Anne Nørkjær; Otrel-Cass, Kathrin

2018-01-01

Building information modelling (BIM) offers a great potential for increasing efficiency in the building industry. However, this potential remains largely unfulfilled; substantiating the need for a sound understanding of the existing practices involved in the building design process, to implement...... BIM efficiently. The aim of this article is to discuss the unfolding activity of a building design process and the role of BIM as a mediating tool. A case study was carried out to investigate contradictions related to the use of BIM in an inter-organizational design process of a naval rescue station...... in Denmark. Aspects of the design activity and the development of practices during the project were explored through the lens of Activity Theory. We were able to examine how BIM-mediated the production of the building design, how BIM use evolved. The article presents and discusses four main contradictions...

Making the case for evidence-based design in healthcare: a descriptive case study of organizational decision making.

Science.gov (United States)

Shoemaker, Lorie K; Kazley, Abby Swanson; White, Andrea

2010-01-01

The aim of this study was to describe the organizational decision-making process used in the selection of evidence-based design (EBD) concepts, the criteria used to make these decisions, and the extent to which leadership style may have influenced the decision-making process. Five research questions were formulated to frame the direction of this study, including: (1) How did healthcare leaders learn of innovations in design? (2) How did healthcare leaders make decisions in the selection of healthcare design concepts? (3) What criteria did healthcare leaders use in the decision-making process? (4) How did healthcare leaders consider input from the staff in design decisions? and (5) To what extent did the leadership style of administrators affect the outcomes of the decision-making process? Current issues affecting healthcare in the community led the principal investigator's organization to undertake an ambitious facilities expansion project. As part of its planning process, the organization learned of EBD principles that seemingly had a positive impact on patient care and safety and staff working conditions. Although promising, a paucity of empirical research addressed the cost/benefit of incorporating many EBD concepts into one hospital setting, and there was no research that articulated the organizational decision-making process used by healthcare administrators when considering the use of EBD in expansion projects. A mixed-method, descriptive, qualitative, single-case study and quantitative design were used to address the five research questions. The Systems Research Organizing Model provided the theoretical framework. A variety of data collection methods was used, including interviews of key respondents, the review of documentary evidence, and the Multifactor Leadership Questionnaire. A participatory process was used throughout the design decision phases, involving staff at all levels of the organization. The Internet and architects facilitated learning about

Systems metabolic engineering design: fatty acid production as an emerging case study.

Science.gov (United States)

Tee, Ting Wei; Chowdhury, Anupam; Maranas, Costas D; Shanks, Jacqueline V

2014-05-01

Increasing demand for petroleum has stimulated industry to develop sustainable production of chemicals and biofuels using microbial cell factories. Fatty acids of chain lengths from C6 to C16 are propitious intermediates for the catalytic synthesis of industrial chemicals and diesel-like biofuels. The abundance of genetic information available for Escherichia coli and specifically, fatty acid metabolism in E. coli, supports this bacterium as a promising host for engineering a biocatalyst for the microbial production of fatty acids. Recent successes rooted in different features of systems metabolic engineering in the strain design of high-yielding medium chain fatty acid producing E. coli strains provide an emerging case study of design methods for effective strain design. Classical metabolic engineering and synthetic biology approaches enabled different and distinct design paths towards a high-yielding strain. Here we highlight a rational strain design process in systems biology, an integrated computational and experimental approach for carboxylic acid production, as an alternative method. Additional challenges inherent in achieving an optimal strain for commercialization of medium chain-length fatty acids will likely require a collection of strategies from systems metabolic engineering. Not only will the continued advancement in systems metabolic engineering result in these highly productive strains more quickly, this knowledge will extend more rapidly the carboxylic acid platform to the microbial production of carboxylic acids with alternate chain-lengths and functionalities. © 2014 Wiley Periodicals, Inc.

Design of safety-critical systems using the complementarities of success and failure domains with a case study

International Nuclear Information System (INIS)

Ahmed, Rizwan; Koo, June Mo; Jeong, Yong Hoon; Heo, Gyunyoung

2011-01-01

A safety-critical system has to qualify the performance-related requirements and the safety-related requirements simultaneously. Conceptually, design processes should consider both of them simultaneously but the practices do not and/or cannot follow such a theoretical approach due to the limitation of design resources. From our experience, we found that safety-related functions must be simultaneously resolved with the development of performance-related functions, particularly, in case of safety-critical systems. Since, success and failure domain analyses are essential for the investigation of performance-related and safety-related requirements, respectively, we articulated our perception to Axiomatic Design (AD), Fault Tree Analysis (FTA), and TRIZ. A design evolution procedure considering feedbacks from AD to identify functional couplings, TRIZ methodology to explore uncoupling solutions and FTA to improve reliability in a systematic way is presented here. A case study regarding design of safety injection tank installed in a nuclear power plant is also included to illustrate the proposed framework. It is expected that several iterations between AD-TRIZ-FTA would result into an optimized design which could be tested against the desired performance and safety criteria.

Design of safety-critical systems using the complementarities of success and failure domains with a case study

Energy Technology Data Exchange (ETDEWEB)

Ahmed, Rizwan; Koo, June Mo [Department of Nuclear Engineering, Kyung Hee University, Yongin-si, Gyeonggi-do 446-701 (Korea, Republic of); Jeong, Yong Hoon [Korea Advanced Institute of Science and Technology, 373-1 Guseong-dong, Yuseong-gu, Daejeon 305-701 (Korea, Republic of); Heo, Gyunyoung, E-mail: gheo@khu.ac.k [Department of Nuclear Engineering, Kyung Hee University, Yongin-si, Gyeonggi-do 446-701 (Korea, Republic of)

2011-01-15

A safety-critical system has to qualify the performance-related requirements and the safety-related requirements simultaneously. Conceptually, design processes should consider both of them simultaneously but the practices do not and/or cannot follow such a theoretical approach due to the limitation of design resources. From our experience, we found that safety-related functions must be simultaneously resolved with the development of performance-related functions, particularly, in case of safety-critical systems. Since, success and failure domain analyses are essential for the investigation of performance-related and safety-related requirements, respectively, we articulated our perception to Axiomatic Design (AD), Fault Tree Analysis (FTA), and TRIZ. A design evolution procedure considering feedbacks from AD to identify functional couplings, TRIZ methodology to explore uncoupling solutions and FTA to improve reliability in a systematic way is presented here. A case study regarding design of safety injection tank installed in a nuclear power plant is also included to illustrate the proposed framework. It is expected that several iterations between AD-TRIZ-FTA would result into an optimized design which could be tested against the desired performance and safety criteria.

Paired split-plot designs of multireader multicase studies.

Science.gov (United States)

Chen, Weijie; Gong, Qi; Gallas, Brandon D

2018-07-01

The widely used multireader multicase ROC study design for comparing imaging modalities is the fully crossed (FC) design: every reader reads every case of both modalities. We investigate paired split-plot (PSP) designs that may allow for reduced cost and increased flexibility compared with the FC design. In the PSP design, case images from two modalities are read by the same readers, thereby the readings are paired across modalities. However, within each modality, not every reader reads every case. Instead, both the readers and the cases are partitioned into a fixed number of groups and each group of readers reads its own group of cases-a split-plot design. Using a [Formula: see text]-statistic based variance analysis for AUC (i.e., area under the ROC curve), we show analytically that precision can be gained by the PSP design as compared with the FC design with the same number of readers and readings. Equivalently, we show that the PSP design can achieve the same statistical power as the FC design with a reduced number of readings. The trade-off for the increased precision in the PSP design is the cost of collecting a larger number of truth-verified patient cases than the FC design. This means that one can trade-off between different sources of cost and choose a least burdensome design. We provide a validation study to show the iMRMC software can be reliably used for analyzing data from both FC and PSP designs. Finally, we demonstrate the advantages of the PSP design with a reader study comparing full-field digital mammography with screen-film mammography.

Enhancing the hermeneutic single-case efficacy design: Bridging the research-practice gap.

Science.gov (United States)

Wall, Jessie M; Kwee, Janelle L; Hu, Monica; McDonald, Marvin J

2017-09-01

Systematic case study designs are emerging as alternative paradigm strategies for psychotherapy and social science research. Through enhanced sensitivity to context, these designs examine idiographic profiles of causal processes. We specifically advocate the use of the hermeneutic single-case efficacy design (HSCED). HSCED has recently been used to investigate the efficacy of an existing therapy with a new population (Observed and Experiential Integration for athlete performance barriers) and an emerging therapy (Lifespan Integration Therapy). We describe innovations in HSCED that were implemented for these studies. These developments include (a) integrating psychotherapists as case developers, (b) incorporating multiple cases in one investigation, and (c) tailoring the repertoire of assessment tools. These extensions strategically incorporated principles of contextual paradigms in HSCED, thus complementing single-case designs that neglect idiographic contexts. We discuss recommendations for using HSCED in practice-based research, highlighting its potential as a bridge to address the research-practice gap.

Bridging the Gap: A Design-based Case Study of a Mathematics Skills Intervention Program

OpenAIRE

Safaralian, Leila

2017-01-01

Abstract of the DissertationBridge the Gap: A Design-based Case Study of a Mathematics Skills Intervention ProgrambyLeila SafaralianDoctor of Education in Educational LeadershipUniversity of California, San Diego, 2017California State University, San Marcos, 2017Kenneth P. Gonzalez, ChairMany students aspire to continue their educational journey, but far too many enter college without the basic content knowledge, skills, or habits of mind needed to succeed. Research on college readiness indic...

Producer responsibility, waste minimisation and the WEEE Directive: case studies in eco-design from the European lighting sector.

Science.gov (United States)

Gottberg, Annika; Morris, Joe; Pollard, Simon; Mark-Herbert, Cecilia; Cook, Matthew

2006-04-15

The EU Directive on Waste Electrical and Electrical Equipment (WEEE) (2002/96/EC), to be implemented in stages from August 2004, attempts to tackle the growing quantity WEEE by making producers responsible for the costs of the collection and recycling of their products at the end of usable life. This is considered to give producers a financial incentive to reduce waste at source through eco-design. This link is, however, under-researched and little is known generally about the effectiveness of extended producer responsibility (EPR) and policies to promote it. This paper presents the findings of an exploratory study to address these important gaps in knowledge. Literature review was used to develop an analytical framework to explain the relationships between the drivers for eco-design and the role of policies to promote EPR. This was applied to eight case studies of firms from the European lighting sector. While quantitative data to confirm the link between EPR and eco-design were difficult to obtain, the case studies showed that EPR has had little effect on product development so far. Within the sector studied, most producers have been able to pass on incremental costs associated with EPR to customers with negligible effects on sales. This reflects perceptions in the lighting sector that, because demand for products is relatively price inelastic and the regulation affects all producers equally, EPR is unlikely to drive eco-design at least in the short run. The cases also showed that choice between individual and centrally provided waste recovery schemes rested on perceptions of relative costs and practicability. It was evident that other drivers, such as bans on hazardous substances, product declarations and supply chain pressures, were often more effective promoters of eco-design. Thus it seems a mix of policy measures is required rather than reliance on economic instruments alone.

Introducing a design exigency to promote student learning through assessment: A case study.

Science.gov (United States)

Grealish, Laurie A; Shaw, Julie M

2018-02-01

Assessment technologies are often used to classify student and newly qualified nurse performance as 'pass' or 'fail', with little attention to how these decisions are achieved. Examining the design exigencies of classification technologies, such as performance assessment technologies, provides opportunities to explore flexibility and change in the process of using those technologies. Evaluate an established assessment technology for nursing performance as a classification system. A case study analysis that is focused on the assessment approach and a priori design exigencies of performance assessment technology, in this case the Australian Nursing Standards Assessment Tool 2016. Nurse assessors are required to draw upon their expertise to judge performance, but that judgement is described as a source of bias, creating confusion. The definition of satisfactory performance is 'ready to enter practice'. To pass, the performance on each criterion must be at least satisfactory, indicating to the student that no further improvement is required. The Australian Nursing Standards Assessment Tool 2016 does not have a third 'other' category, which is usually found in classification systems. Introducing a 'not yet competent' category and creating a two-part, mixed methods assessment process can improve the Australian Nursing Standards Assessment Tool 2016 assessment technology. Using a standards approach in the first part, judgement is valued and can generate learning opportunities across a program. Using a measurement approach in the second part, student performance can be 'not yet competent' but still meet criteria for year level performance and a graded pass. Subjecting the Australian Nursing Standards Assessment Tool 2016 assessment technology to analysis as a classification system provides opportunities for innovation in design. This design innovation has the potential to support students who move between programs and clinicians who assess students from different

Building a Case-Based Design Assistant for Workplace Environment Design

NARCIS (Netherlands)

Mallory-Hill, S.M.; Timmermans, H.J.P.

1998-01-01

This paper reports on the early stages of development of a case-based design tool. The purpose of this tool, called the Workplace Environment Design Advisor (WEDA), is to support architects in the conceptual design of workplace environments. The objective of this system is to provide electronic

Design of the real time systems using temporal logic specifications: a case study

Directory of Open Access Journals (Sweden)

A. Ursu

1996-07-01

Full Text Available An implementation method for real time systems is proposed in this article. The implementation starts with the design of the functional specifications of the systems behaviour. The functional specifications are introduced as a set of rules describing the partial time ordering of the actions performed by the system. These rules are then written in terms of temporal logic formulae. The temporal logic formulae are checked using Z.Manna-P.Wolper satisfiability analysis procedure [1]. It is known that this procedure generates a state-graph which can be regarded as a state- based automaton of the system. The sate-based automaton is used then to generate the dual (inverted automaton of the system. The dual automaton is called action-based automaton and can be created using the procedure proposed by authors in [4,5]. Using the action-based automaton of the system the design method introduced in [5,6] is applied to implement the system driver in a systematic manner which can be computerised. The method proposed in this paper is an efficient complementation and generalisation of the results [4,5,6] mentioned above. The method is used for a case study. An elevator control system is designed using the proposed method. The design is carried out in a systematic manner which includes: a design of functional specifications, b design of temporal logic specifications, c satisfiability analysis of temporal logic specifications, d design of the state-based automaton of the specifications, e design of the action-based automaton of the system, f design of the transition activation conditions, g design of the action activation conditions, h design of the functional model of the elevator control system, i implementation of the elevator's actions, j design of the elevator control system driver.

Case Studies of Leading Edge Small Urban High Schools. Relevance Strategic Designs: 4. Boston Arts Academy

Science.gov (United States)

Shields, Regis Anne; Ireland, Nicole; City, Elizabeth; Derderian, Julie; Miles, Karen Hawley

2008-01-01

This report is one of nine detailed case studies of small urban high schools that served as the foundation for the Education Resource Strategies (ERS) report "Strategic Designs: Lessons from Leading Edge Small Urban High Schools." These nine schools were dubbed "Leading Edge Schools" because they stand apart from other high…

Case Studies of Leading Edge Small Urban High Schools. Relevance Strategic Designs: 6. Perspectives Charter School

Science.gov (United States)

Shields, Regis Anne; Ireland, Nicole; City, Elizabeth; Derderian, Julie; Miles, Karen Hawley

2008-01-01

This report is one of nine detailed case studies of small urban high schools that served as the foundation for the Education Resource Strategies (ERS) report "Strategic Designs: Lessons from Leading Edge Small Urban High Schools." These nine schools were dubbed "Leading Edge Schools" because they stand apart from other high…

Case Studies of Leading Edge Small Urban High Schools. Relevance Strategic Designs: 7. TechBoston Academy

Science.gov (United States)

Shields, Regis Anne; Ireland, Nicole; City, Elizabeth; Derderian, Julie; Miles, Karen Hawley

2008-01-01

This report is one of nine detailed case studies of small urban high schools that served as the foundation for the Education Resource Strategies (ERS) report "Strategic Designs: Lessons from Leading Edge Small Urban High Schools." These nine schools were dubbed "Leading Edge Schools" because they stand apart from other high…

Methodology Series Module 2: Case-control Studies.

Science.gov (United States)

Setia, Maninder Singh

2016-01-01

Case-Control study design is a type of observational study. In this design, participants are selected for the study based on their outcome status. Thus, some participants have the outcome of interest (referred to as cases), whereas others do not have the outcome of interest (referred to as controls). The investigator then assesses the exposure in both these groups. The investigator should define the cases as specifically as possible. Sometimes, definition of a disease may be based on multiple criteria; thus, all these points should be explicitly stated in case definition. An important aspect of selecting a control is that they should be from the same 'study base' as that of the cases. We can select controls from a variety of groups. Some of them are: General population; relatives or friends; and hospital patients. Matching is often used in case-control control studies to ensure that the cases and controls are similar in certain characteristics, and it is a useful technique to increase the efficiency of the study. Case-Control studies can usually be conducted relatively faster and are inexpensive - particularly when compared with cohort studies (prospective). It is useful to study rare outcomes and outcomes with long latent periods. This design is not very useful to study rare exposures. Furthermore, they may also be prone to certain biases - selection bias and recall bias.

SWOT analysis of program design and implementation: a case study on the reduction of maternal mortality in Afghanistan.

Science.gov (United States)

Ahmadi, Qudratullah; Danesh, Homayoon; Makharashvili, Vasil; Mishkin, Kathryn; Mupfukura, Lovemore; Teed, Hillary; Huff-Rousselle, Maggie

2016-07-01

This case study analyzes the design and implementation of the Basic Package of Health Services (BPHS) in Afghanistan by synthesizing the literature with a focus on maternal health services. The authors are a group of graduate students in the Brandeis University International Health Policy and Management Program and Sustainable International Development Program who used the experience in Afghanistan to analyze an example of successfully implementing policy; two of the authors are Afghan physicians with direct experience in implementing the BPHS. Data is drawn from a literature review, and a unique aspect of the case study is the application of the business-oriented SWOT analysis to the design and implementation of the program that successfully targeted lowering maternal mortality in Afghanistan. It provides a useful example of how SWOT analysis can be used to consider the reasons for, or likelihood of, successful or unsuccessful design and implementation of a policy or program. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.

Single-case research design in pediatric psychology: considerations regarding data analysis.

Science.gov (United States)

Cohen, Lindsey L; Feinstein, Amanda; Masuda, Akihiko; Vowles, Kevin E

2014-03-01

Single-case research allows for an examination of behavior and can demonstrate the functional relation between intervention and outcome in pediatric psychology. This review highlights key assumptions, methodological and design considerations, and options for data analysis. Single-case methodology and guidelines are reviewed with an in-depth focus on visual and statistical analyses. Guidelines allow for the careful evaluation of design quality and visual analysis. A number of statistical techniques have been introduced to supplement visual analysis, but to date, there is no consensus on their recommended use in single-case research design. Single-case methodology is invaluable for advancing pediatric psychology science and practice, and guidelines have been introduced to enhance the consistency, validity, and reliability of these studies. Experts generally agree that visual inspection is the optimal method of analysis in single-case design; however, statistical approaches are becoming increasingly evaluated and used to augment data interpretation.

Collective design in 3D printing: A large scale empirical study of designs, designers and evolution

DEFF Research Database (Denmark)

Özkil, Ali Gürcan

2017-01-01

This paper provides an empirical study of a collective design platform (Thingiverse); with the aim of understanding the phenomenon and investigating how designs concurrently evolve through the large and complex network of designers. The case study is based on the meta-data collected from 158 489 ...

Instruction in Divergent Thinking for Conceptual Design: A Case Study Based on a Corkscrew

OpenAIRE

Ying-Chieh Liu; Chin-Yu Kao; Amaresh Chakrabarti

2015-01-01

Abstraction is a powerful tool for designers in the conceptual design stage. Such abstractions take various forms, and little is known as to how a particular method of abstraction would support designers in specific design cases. A method is proposed which includes a deliberate step for divergent thinking. The method presents learners with an abstract representation of an existing artifact, and encourages them to explore potential concepts that are different in style but are based on the same...

Final report on case studies

DEFF Research Database (Denmark)

Ljungberg, Daniel; McKelvey, Maureen; Lassen, Astrid Heidemann

2012-01-01

Case study as a research design means investigating a single or multiple instance(s) or setting(s) (i.e. a case) and its entire context to explain a phenomenon and its processes. This is achieved through detailed understanding, usually comprised of multiple sources of information. In this way, case...... studies attempt to provide as a complete an understanding of a (complex) phenomenon as possible. Within the AEGIS project, survey and case study research are complementary. They are complementary in the sense that the former can provide more generalizable evidence on a phenomenon in terms of cross......-sectional data, while the latter can provide more in-depth (qualitative) understanding on specific issues. In systematically examining the case studies, however, this report goes beyond a typical single case study. Here we provide a synthesis of 86 case studies. Multiple case studies, following similar focus...

Agile Data Curation Case Studies Leading to the Identification and Development of Data Curation Design Patterns

Science.gov (United States)

Benedict, K. K.; Lenhardt, W. C.; Young, J. W.; Gordon, L. C.; Hughes, S.; Santhana Vannan, S. K.

2017-12-01

The planning for and development of efficient workflows for the creation, reuse, sharing, documentation, publication and preservation of research data is a general challenge that research teams of all sizes face. In response to: requirements from funding agencies for full-lifecycle data management plans that will result in well documented, preserved, and shared research data products increasing requirements from publishers for shared data in conjunction with submitted papers interdisciplinary research team's needs for efficient data sharing within projects, and increasing reuse of research data for replication and new, unanticipated research, policy development, and public use alternative strategies to traditional data life cycle approaches must be developed and shared that enable research teams to meet these requirements while meeting the core science objectives of their projects within the available resources. In support of achieving these goals, the concept of Agile Data Curation has been developed in which there have been parallel activities in support of 1) identifying a set of shared values and principles that underlie the objectives of agile data curation, 2) soliciting case studies from the Earth science and other research communities that illustrate aspects of what the contributors consider agile data curation methods and practices, and 3) identifying or developing design patterns that are high-level abstractions from successful data curation practice that are related to common data curation problems for which common solution strategies may be employed. This paper provides a collection of case studies that have been contributed by the Earth science community, and an initial analysis of those case studies to map them to emerging shared data curation problems and their potential solutions. Following the initial analysis of these problems and potential solutions, existing design patterns from software engineering and related disciplines are identified as a

A Case Study in Classroom Management and School Involvement: Designing an Art Room for Effective Learning

Science.gov (United States)

Broome, Jeffrey L.

2013-01-01

The purpose of this research project is to investigate the design of classroom environments through the lens of a uniquely selected art educator. More specifically, the purpose is to use case study methodology (Stake, 1995) to characterize the resulting instructional experiences for an art educator who had the unique opportunity to collaborate…

Free Material Design with Multiple Load Cases

DEFF Research Database (Denmark)

Pedersen, Pauli; Pedersen, Niels Leergaard

2012-01-01

Multiple load cases and the consideration of strength is a reality that most structural designs are exposed to. Improved possibility to produce specific materials, say by fiber lay-up, put focus on research on free material optimization. A formulation for such design problems together with a prac......Multiple load cases and the consideration of strength is a reality that most structural designs are exposed to. Improved possibility to produce specific materials, say by fiber lay-up, put focus on research on free material optimization. A formulation for such design problems together...... with a practical recursive design procedure is presented and illustrated with examples. The presented finite element analysis involve many elements as well as many load cases. Separating the local amount of material from a description with unit trace for the local anisotropy, gives the free materials formulation...... a more physical interpretation of the material constraint....

Interactive design computation : A case study on quantum design paradigm

NARCIS (Netherlands)

Feng, H.

2013-01-01

The ever-increasing complexity of design processes fosters novel design computation models to be employed in architectural research and design in order to facilitate accurate data processing and refined decision making. These computation models have enabled designers to work with complex geometry

A case study in value design

Directory of Open Access Journals (Sweden)

M. Sinclair

2003-12-01

Full Text Available The design of a special type of valve gave rise to a problem which lead the mechanical engineers who designed the valve to call in the help of the author. The final solution to the problem may not be mathematically sophisticated (in fact, it may seem trivial to some readers, but the steps through which the design team struggled and the final approach which resulted in a practically feasible solution may be of interest to other practitioners.

Teaching Case: MiHotel--Applicant Processing System Design Case

Science.gov (United States)

Miller, Robert E.; Dunn, Paul

2018-01-01

This teaching case describes the functionality of an applicant processing system designed for a fictitious hotel chain. The system detailed in the case includes a webform where applicants complete and submit job applications. The system also includes a desktop application used by hotel managers and Human Resources to track applications and process…

Analysis of functionality free CASE-tools databases design

Directory of Open Access Journals (Sweden)

A. V. Gavrilov

2016-01-01

Full Text Available The introduction in the educational process of database design CASEtechnologies requires the institution of significant costs for the purchase of software. A possible solution could be the use of free software peers. At the same time this kind of substitution should be based on even-com representation of the functional characteristics and features of operation of these programs. The purpose of the article – a review of the free and non-profi t CASE-tools database design, as well as their classifi cation on the basis of the analysis functionality. When writing this article were used materials from the offi cial websites of the tool developers. Evaluation of the functional characteristics of CASEtools for database design made exclusively empirically with the direct work with software products. Analysis functionality of tools allow you to distinguish the two categories CASE-tools database design. The first category includes systems with a basic set of features and tools. The most important basic functions of these systems are: management connections to database servers, visual tools to create and modify database objects (tables, views, triggers, procedures, the ability to enter and edit data in table mode, user and privilege management tools, editor SQL-code, means export/import data. CASE-system related to the first category can be used to design and develop simple databases, data management, as well as a means of administration server database. A distinctive feature of the second category of CASE-tools for database design (full-featured systems is the presence of visual designer, allowing to carry out the construction of the database model and automatic creation of the database on the server based on this model. CASE-system related to this categories can be used for the design and development of databases of any structural complexity, as well as a database server administration tool. The article concluded that the

Sizing rules for the pressure design of pump casings

International Nuclear Information System (INIS)

Aflalo, C.; Barbarulo, R.; Courcot, M.; Marolles, M. de; Douarin, M.; Grandemange, J.M.; Martin, R.

1987-01-01

The paper presents the theoretical and experimental studies undertaken by AFCEN (French Society for Design and Construction Rules for nuclear island components) and SCP (French Union of Pump Manufacturers) in order to develop sizing rules for the pressure design of radially split pump casings. Shape factors used in simplified design formulas have been developed for different configurations using results of finite element analyses and experimental extensometric analyses. (orig.)

BioFleet case studies

International Nuclear Information System (INIS)

2007-01-01

These six case studies examined the use of different biodiesel blends as fuel supply sources for businesses in British Columbia (BC). In the first case study, 6 municipalities participated in a pilot program designed to compare the performance of biodiesel and diesel fuels. Each municipality operated 2 base vehicles running on conventional diesel along with 2 similar vehicles which used biodiesel. Real time emissions tests and analyses of the vehicles using biodiesel were also conducted by 2 of the participating municipalities. All municipalities participating in the study agreed to purchase significant volumes of biodiesel. The second case study described a pilot study conducted by the City of Vancouver's equipment services branch in 2004. As a result of the study, the city now has over 530 types of equipment that use biodiesel. The third case study described a program designed by TSI Terminals in Vancouver to assess the emission reduction impact of using biodiesel at its port facility. Six different pieces of equipment were used to confirm that biodiesel could be used throughout the terminal. Test results confirmed that biodiesel blends could be used to reduce emissions. Overall emissions were reduced by 30 per cent. The fourth case study described a waste renderer that used a fleet of 36 trucks to deliver raw products to its plants. The company made the decision to use only biodiesel for its entire fleet of trucks. Since July 2005, the company has logged over 1.7 million km using biodiesel blends. The fifth case study described a salmon hatchery that switched from diesel to biodiesel in order to reduce emissions. The biodiesel blends are used to fuel the hatchery's 2 diesel generators. The hatchery has reduced emissions of greenhouse gases (GHGs) by an estimated 1800 tonnes annually. The sixth case study described how the Township of Langley has started using biodiesel for its entire fleet of of approximately 250 pieces of equipment. The township has not

Case-based reasoning support for engineering design

Science.gov (United States)

Lees, Brian; Hamza, Meer; Irgens, Chris

2000-10-01

The potential application of case-based reasoning (CBR) in design support is illustrated through examples drawn from research at the University of Paisley, demonstrating the suitability of CBR for different aspects of design, different problem areas, and different design goals. A quality advisory system has been developed for the early stages of mechanical engineering design, the aim of which is to provide quality advice in a variant design situation. In the domain of software engineering CBR has been applied to advise on which metrics are appropriate fora assessing the quality of the software currently under design. The system integrates CBR with concepts from quality function deployment (QFD) and incorporates a case library holding past software quality histories. CBR has been applied in support of conceptual design: to capture detailed design histories by monitoring designer actions, and thereby support design reuse through the evaluation of designs, through the provision of query, browsing and replay facilities. The resulting system is aimed to support the design of safety critical systems, by assisting in the construction of safety arguments, and cooperative design.

A tool for early workstation design for small and medium enterprises evaluated in five cases

NARCIS (Netherlands)

Hallbeck, M.S.; Bosch, T.; Rhijn, J.W.van; Krause, F.; Looze, M.P.de; Vink, P.

2010-01-01

Five case studies on production line design were described to study the effect of an early design support tool. Based on these case studies, the simple, interactive, real-time, medium-fidelity, mixed-reality methodology was not only found to be a good early design stage evaluative tool for

Techniques for Conducting Effective Concept Design and Design-to-Cost Trade Studies

Science.gov (United States)

Di Pietro, David A.

2015-01-01

Concept design plays a central role in project success as its product effectively locks the majority of system life cycle cost. Such extraordinary leverage presents a business case for conducting concept design in a credible fashion, particularly for first-of-a-kind systems that advance the state of the art and that have high design uncertainty. A key challenge, however, is to know when credible design convergence has been achieved in such systems. Using a space system example, this paper characterizes the level of convergence needed for concept design in the context of technical and programmatic resource margins available in preliminary design and highlights the importance of design and cost evaluation learning curves in determining credible convergence. It also provides techniques for selecting trade study cases that promote objective concept evaluation, help reveal unknowns, and expedite convergence within the trade space and conveys general practices for conducting effective concept design-to-cost studies.

Performable Case Studies in Ethics Education.

Science.gov (United States)

Robeson, Richard; King, Nancy M P

2017-09-12

Bioethics education often includes the study of short stories, novels, plays, and films, because such materials present case examples that can highlight relevant issues and questions especially vividly for a wide range of students. In addition, creative writing is widely used in the education of health professional students and in continuing education settings for health professionals. There are very few academic or professional disciplines that do not use case studies, but the case study in dialogic form has not been standard practice for thousands of years. Dramatic arts casuistry-the creation and performance of short case studies designed specifically to raise bioethics issues for discussion-represents an application of literature and the medical humanities that is both unique and uniquely valuable. This essay describes the development and history of a course that has been successfully taught to medical students and graduate bioethics students, in which the class researches, writes, and performs a case study designed to elicit reflection and discussion about a topic and set of bioethics issues of current interest to both academic and general audiences. The model is also suited to the presentation and discussion of existing case studies, both live and via on-demand audio.

Design of an Embedded Multi-Camera Vision System—A Case Study in Mobile Robotics

Directory of Open Access Journals (Sweden)

Valter Costa

2018-02-01

Full Text Available The purpose of this work is to explore the design principles for a Real-Time Robotic Multi Camera Vision System, in a case study involving a real world competition of autonomous driving. Design practices from vision and real-time research areas are applied into a Real-Time Robotic Vision application, thus exemplifying good algorithm design practices, the advantages of employing the “zero copy one pass” methodology and associated trade-offs leading to the selection of a controller platform. The vision tasks under study are: (i recognition of a “flat” signal; and (ii track following, requiring 3D reconstruction. This research firstly improves the used algorithms for the mentioned tasks and finally selects the controller hardware. Optimization for the shown algorithms yielded from 1.5 times to 190 times improvements, always with acceptable quality for the target application, with algorithm optimization being more important on lower computing power platforms. Results also include a 3-cm and five-degree accuracy for lane tracking and 100% accuracy for signalling panel recognition, which are better than most results found in the literature for this application. Clear results comparing different PC platforms for the mentioned Robotic Vision tasks are also shown, demonstrating trade-offs between accuracy and computing power, leading to the proper choice of control platform. The presented design principles are portable to other applications, where Real-Time constraints exist.

Contemporary large-scale international design competitions1 in China. A case study of Baietan, Guangzhou

Directory of Open Access Journals (Sweden)

Zheng Liang

2013-12-01

Full Text Available The importance of contemporary design competitions has been increasingly recognized in fast-growing China in the course of World Trade Organization (WTO integration and globalization. However, scientific and systematic analysis is rare on how international design competitions are introduced, and how they interact and transplant in the Chinese context. The well-known Chinese-Western culture gap and complicated social and political background make this topic more challenging. Herein, the authors focus on how the international design competitions were “translated” into both international and local perspectives with a compara­tive analysis on development of international design competitions between the Chinese and the Finnish model. To fully exemplify the design-completion procedure and the different roles of Chinese stakeholders and their perspectives on design competitions, the authors study the Baietan case, which was chosen due to its specific relationship with the city’s strategic plan, its representativeness in using international design competitions in connection to large-scale urban projects in China and its public access to the relevant documentation. The preliminary findings suggest that Chinese-style design competitions, acting as ‘designed trading zones’, with less-defined competition rules compared to the Finnish model, may foster the settings of local transformation in adopting international urban planning and design knowledge. However, an integrated approach is required to address subsequent implementation.

Case Studies of Leading Edge Small Urban High Schools. Relevance Strategic Designs: 8. High Tech High School

Science.gov (United States)

Shields, Regis Anne; Ireland, Nicole; City, Elizabeth; Derderian, Julie; Miles, Karen Hawley

2008-01-01

This report is one of nine detailed case studies of small urban high schools that served as the foundation for the Education Resource Strategies (ERS) report "Strategic Designs: Lessons from Leading Edge Small Urban High Schools." These nine schools were dubbed "Leading Edge Schools" because they stand apart from other high…

Case Studies of Leading Edge Small Urban High Schools. Personalization Strategic Designs: 9. MetWest High School

Science.gov (United States)

Shields, Regis Anne; Ireland, Nicole; City, Elizabeth; Derderian, Julie; Miles, Karen Hawley

2008-01-01

This report is one of nine detailed case studies of small urban high schools that served as the foundation for the Education Resource Strategies (ERS) report "Strategic Designs: Lessons from Leading Edge Small Urban High Schools." These nine schools were dubbed "Leading Edge Schools" because they stand apart from other high…

Research on conflict resolution of collaborative design with fuzzy case-based reasoning method

Institute of Scientific and Technical Information of China (English)

HOU Jun-ming; SU Chong; LIANG Shuang; WANG Wan-shan

2009-01-01

Collaborative design is a new style for modern mechanical design to meet the requirement of increasing competition. Designers of different places complete the same work, but the conflict appears in the process of design which may interface the design. Case-based reasoning (CBR) method is applied to the problem of conflict resolution, which is in the artificial intelligence field. However, due to the uncertainties in knowledge representation, attribute description, and similarity measures of CBR, it is very difficult to find the similar cases from case database. A fuzzy CBR method was proposed to solve the problem of conflict resolution in collaborative design. The process of fuzzy CBR was introduced. Based on the feature attributes and their relative weights determined by a fuzzy technique, a fuzzy CBR retrieving mechanism was developed to retrieve conflict resolution cases that tend to enhance the functions of the database. By indexing, calculating the weight and defuzzicating of the cases, the case similarity can be obtained. Then the case consistency was measured to keep the right result. Finally, the fuzzy CBR method for conflict resolution was demonstrated by means of a case study. The prototype system based on web is developed to illustrate the methodology.

Visual memory effects on intraoperator study design: determining a minimum time gap between case reviews to reduce recall bias.

Science.gov (United States)

Campbell, W Scott; Talmon, Geoffrey A; Foster, Kirk W; Baker, John J; Smith, Lynette M; Hinrichs, Steven H

2015-03-01

The objective of this research was to determine test intervals between intraoperator case reviews to minimize the impact of recall. Three pathologists were presented with a group of 120 slides and subsequently challenged with a study set of 120 slides after 2-week and 4-week intervals. The challenge set consisted of 60 slides seen during the initial review and 60 slides previously unseen within the study. Pathologists rendered a diagnosis for each slide and indicated whether they recalled seeing the slide previously (yes/no). Two weeks after having been shown 60 cases from a challenge set of 120 cases, the pathologists correctly remembered 26, 22, and 24 cases or 40% overall. After 4 weeks, the pathologists correctly recalled 31% of cases previously seen. Pathologists were capable of recalling from memory cases seen previously at 2 and 4 weeks. Recall rates may be sufficiently high to affect intraobserver study design. Copyright© by the American Society for Clinical Pathology.

Proposal for elicitation and analysis of environmental requirements into the construction design process: a case study

Directory of Open Access Journals (Sweden)

Camila Pegoraro

2010-05-01

Full Text Available Proposal: As new demands from sustainable development, environmental requirements arise as another challenge to design process management. It is already known that companies which design buildings are usually exposed to many managerial difficulties. Faced to the environmental demands, these companies require new facilities to align environmental requirements to the business goals and to include them properly in design process. This paper is based on a case study in a construction company, which was developed through interviews and document analysis. It is intended to present a procedure for the project environmental requirements elicitation, organization and analysis, which is based on the requirements engineering (ER concepts. As results it was concluded that the ER concepts are useful for the environmental requirements integration into the design process and that strategic planning should give directions for the effective environmental requirements adherence. Moreover, a procedure for environmental requirements modeling is proposed. Key-words: Design process, Requirements management, Environmental requirements, Construction

Case study on chemical plant accidents for flow-sheet design of the HTTR-IS system

International Nuclear Information System (INIS)

Homma, Hiroyuki; Sato, Hiroyuki; Kasahara, Seiji; Hara, Teruo; Kato, Ryoma; Sakaba, Nariaki; Ohashi, Hirofumi

2007-02-01

At the present time, we are alarmed by depletion of fossil energy and adverse effect of rapid increase in fossil fuel burning on environment such as climate changes and acid rain, because our lives depend still heavily upon fossil energy. It is thus widely recognized that hydrogen is one of important future energy carriers in which it is used without emission of carbon dioxide greenhouse gas and atmospheric pollutants and that hydrogen demand will increase greatly as fuel cells are developed and applied widely in the near future. To meet massive demand of hydrogen, hydrogen production from water utilizing nuclear, especially by thermochemical water-splitting Iodine-Sulphur (IS) process utilizing heat from High-Temperature Gas-cooled Reactors (HTGRs), offers one of the most attractive zero-emission energy strategies and the only one practical on a substantial scale. However, to establish a technology based for the HTGR hydrogen production by the IS process, we should close several technology gaps through R and D with the High-Temperature Engineering Test Reactor (HTTR), which is the only Japanese HTGR built and operated at the Oarai Research and Development Centre of Japan Atomic Energy Agency (JAEA). We have launched design studies of the IS process hydrogen production system coupled with the HTTR (HTTR-IS system) to demonstrate HTGR hydrogen production. In designing the HTTR-IS system, it is necessary to consider preventive and breakdown maintenance against accidents occurred in the IS process as a chemical plant. This report describes case study on chemical plant accidents relating to the IS process plant and shows a proposal of accident protection measures based on above case study, which is necessary for flow-sheet design of the HTTR-IS system. (author)

The LITERACY-Portal as the Subject of a Case Study on a Human-Centered Design Solution Supporting Users with Special Needs

Science.gov (United States)

Hagelkruys, Dominik; Motschnig, Renate

2017-01-01

Case studies help to reflect and to capture information about complex processes and domains and to make it reusable for future application in related contexts. In the case study reported in this article, we aim to capture and share processes and experience that we gained while designing a web-portal for supporting the specific user group of…

Systems approach for condition management design: JET neutral beam system-A fusion case study

Energy Technology Data Exchange (ETDEWEB)

Khella, M., E-mail: M.Khella@lboro.ac.uk [Systems Engineering Innovation Centre (SEIC) - BAE Systems, Loughborough University, Holywell Park, Leicestershire LE11 3TU (United Kingdom); Pearson, J. [Systems Engineering Innovation Centre (SEIC) - BAE Systems, Loughborough University, Holywell Park, Leicestershire LE11 3TU (United Kingdom); Dixon, R. [Electronic and Electrical Engineering, Loughborough University, Leicestershire LE11 3TU (United Kingdom); Ciric, D.; Day, I.; King, R.; Milnes, J.; Stafford-Allen, R. [EURATOM/CCFE Fusion Association, Culham Science Centre, Oxfordshire OX14 3DB (United Kingdom)

2011-10-15

The maturation of any new technology can be coarsely divided into three stages of a development lifecycle: (1) fundamental research, (2) experimental rig development and testing through to (3) commercialization. With the enhancement of machines like JET, the building of ITER and the initiation of DEMO design activities, the fusion community is moving from stages 1 and 2 towards stage 3. One of the consequences of this transition will be a shift in emphasis from scientific achievement to maximizing machine reliability and availability. The fusion community should therefore be preparing itself for this shift by examining all methods and tools utilized in established engineering sectors that might help to improve these fundamental performance parameters. To this end, the Culham Centre for Fusion Energy (CCFE) has proactively engaged with UK industry to examine whether the development of condition management (CM) systems could help improve such performance parameters. This paper describes an initial CM design case study on the JET neutral beam system. The primary output of this study was the development of a CM design methodology that captures existing experience in fault detection, and classification as well as new methods for fault diagnosis. A summary of the methods used and the potential benefits of data fusion are presented here.

Theory testing using case studies

DEFF Research Database (Denmark)

Dissing Sørensen, Pernille; Løkke Nielsen, Ann-Kristina

2006-01-01

on the strengths of theory-testing case studies. We specify research paths associated with theory testing in case studies and present a coherent argument for the logic of theoretical development and refinement using case studies. We emphasize different uses of rival explanations and their implications for research...... design. Finally, we discuss the epistemological logic, i.e., the value to larger research programmes, of such studies and, following Lakatos, conclude that the value of theory-testing case studies lies beyond naïve falsification and in their contribution to developing research programmes in a progressive......Case studies may have different research goals. One such goal is the testing of small-scale and middle-range theories. Theory testing refers to the critical examination, observation, and evaluation of the 'why' and 'how' of a specified phenomenon in a particular setting. In this paper, we focus...

Specifying design conservatism: Worst case versus probabilistic analysis

Science.gov (United States)

Miles, Ralph F., Jr.

1993-01-01

Design conservatism is the difference between specified and required performance, and is introduced when uncertainty is present. The classical approach of worst-case analysis for specifying design conservatism is presented, along with the modern approach of probabilistic analysis. The appropriate degree of design conservatism is a tradeoff between the required resources and the probability and consequences of a failure. A probabilistic analysis properly models this tradeoff, while a worst-case analysis reveals nothing about the probability of failure, and can significantly overstate the consequences of failure. Two aerospace examples will be presented that illustrate problems that can arise with a worst-case analysis.

Human factors guidelines and methodology in the design of a user computer interface: a case study

International Nuclear Information System (INIS)

Richards, R.E.; Gilmore, W.E.; Haney, L.N.

1986-01-01

In this case study, human factors personnel were requested to participate in a project team of programmers and operations specialists to design a cathode ray tube (CRT) display system for a complex process control application. This presentation describes the process and benefits obtained by incorporating human factors guidelines and methods in system design. Standard human engineering guidelines and techniques were utilized by the project team. In addition, previously published documents and research findings sponsored by the US Nuclear Regulatory Commission (USNRC) were used. Preliminary tasks involved a review of the draft plant procedures. Then, interviews with operators were conducted to establish the initial information for the displays. These initial requirements were evaluated against existing guidelines and criteria to determine the optimal presentation formats. Detailed steps of the approaches used, design decisions made, and tradeoffs that resulted in the final user acceptable design are discussed. 7 refs., 2 figs

Uncertainties in Early-Stage Capital Cost Estimation of Process Design – A Case Study on Biorefinery Design

International Nuclear Information System (INIS)

Cheali, Peam; Gernaey, Krist V.; Sin, Gürkan

2015-01-01

Capital investment, next to the product demand, sales, and production costs, is one of the key metrics commonly used for project evaluation and feasibility assessment. Estimating the investment costs of a new product/process alternative during early-stage design is a challenging task, which is especially relevant in biorefinery research where information about new technologies and experience with new technologies is limited. A systematic methodology for uncertainty analysis of cost data is proposed that employs: (a) bootstrapping as a regression method when cost data are available; and, (b) the Monte Carlo technique as an error propagation method based on expert input when cost data are not available. Four well-known models for early-stage cost estimation are reviewed and analyzed using the methodology. The significance of uncertainties of cost data for early-stage process design is highlighted using the synthesis and design of a biorefinery as a case study. The impact of uncertainties in cost estimation on the identification of optimal processing paths is indeed found to be profound. To tackle this challenge, a comprehensive techno-economic risk analysis framework is presented to enable robust decision-making under uncertainties. One of the results using order-of-magnitude estimates shows that the production of diethyl ether and 1,3-butadiene are the most promising with the lowest economic risks (among the alternatives considered) of 0.24 MM$/a and 4.6 MM$/a, respectively.

Uncertainties in Early Stage Capital Cost Estimation of Process Design – A case study on biorefinery design

Directory of Open Access Journals (Sweden)

Gurkan eSin

2015-02-01

Full Text Available Capital investment, next to the product demand, sales and production costs, is one of the key metrics commonly used for project evaluation and feasibility assessment. Estimating the investment costs of a new product/process alternative during early stage design is a challenging task. This is especially important in biorefinery research, where available information and experiences with new technologies is limited. A systematic methodology for uncertainty analysis of cost data is proposed that employs (a Bootstrapping as a regression method when cost data is available and (b the Monte Carlo technique as an error propagation method based on expert input when cost data is not available. Four well-known models for early stage cost estimation are reviewed an analyzed using the methodology. The significance of uncertainties of cost data for early stage process design is highlighted using the synthesis and design of a biorefinery as a case study. The impact of uncertainties in cost estimation on the identification of optimal processing paths is found to be profound. To tackle this challenge, a comprehensive techno-economic risk analysis framework is presented to enable robust decision making under uncertainties. One of the results using an order-of-magnitude estimate shows that the production of diethyl ether and 1,3-butadiene are the most promising with economic risks of 0.24 MM$/a and 4.6 MM$/a due to uncertainties in cost estimations, respectively.

Uncertainties in Early-Stage Capital Cost Estimation of Process Design – A Case Study on Biorefinery Design

Energy Technology Data Exchange (ETDEWEB)

Cheali, Peam; Gernaey, Krist V.; Sin, Gürkan, E-mail: gsi@kt.dtu.dk [Department of Chemical and Biochemical Engineering, Technical University of Denmark, Lyngby (Denmark)

2015-02-06

Capital investment, next to the product demand, sales, and production costs, is one of the key metrics commonly used for project evaluation and feasibility assessment. Estimating the investment costs of a new product/process alternative during early-stage design is a challenging task, which is especially relevant in biorefinery research where information about new technologies and experience with new technologies is limited. A systematic methodology for uncertainty analysis of cost data is proposed that employs: (a) bootstrapping as a regression method when cost data are available; and, (b) the Monte Carlo technique as an error propagation method based on expert input when cost data are not available. Four well-known models for early-stage cost estimation are reviewed and analyzed using the methodology. The significance of uncertainties of cost data for early-stage process design is highlighted using the synthesis and design of a biorefinery as a case study. The impact of uncertainties in cost estimation on the identification of optimal processing paths is indeed found to be profound. To tackle this challenge, a comprehensive techno-economic risk analysis framework is presented to enable robust decision-making under uncertainties. One of the results using order-of-magnitude estimates shows that the production of diethyl ether and 1,3-butadiene are the most promising with the lowest economic risks (among the alternatives considered) of 0.24 MM$/a and 4.6 MM$/a, respectively.

Design of farm winery façades for the optimisation of indoor natural lighting: a case study

Directory of Open Access Journals (Sweden)

Daniele Torreggiani

2013-06-01

Full Text Available This paper deals with the theme of daylighting performances of rural buildings, within a broader research context aimed at establishing design criteria for farm wineries. The objective is to benchmark the performances of different window systems in order to define design guidelines directed towards the optimisation of natural lighting to improve visual comfort and reduce energy consumption. A winegrowing and producing farm with standard features in the Emilia- Romagna region, Northern Italy, is considered as a case study. Particular attention was given to the part of the building designated for tasting activities. The study considered several opening solutions in the building envelope, and showed the effectiveness of those involving south façade glazing with appropriate screening systems. Further analyses will aim to investigate the performance of windows distributed on several fronts, including heat balance assessment.

Portraying the nature of corruption: Using an explorative case-study design

NARCIS (Netherlands)

de Graaf, G.; Huberts, L.W.J.C.

2008-01-01

What is the nature of corruption in Western democracies? To answer this research question, the authors study 10 Dutch corruption cases in depth, looking at confidential criminal files. The cases allow them to sketch a general profile of a corruption case. The authors offer nine propositions to

Design of Composite Structures Using Knowledge-Based and Case Based Reasoning

Science.gov (United States)

Lambright, Jonathan Paul

1996-01-01

A method of using knowledge based and case based reasoning to assist designers during conceptual design tasks of composite structures was proposed. The cooperative use of heuristics, procedural knowledge, and previous similar design cases suggests a potential reduction in design cycle time and ultimately product lead time. The hypothesis of this work is that the design process of composite structures can be improved by using Case-Based Reasoning (CBR) and Knowledge-Based (KB) reasoning in the early design stages. The technique of using knowledge-based and case-based reasoning facilitates the gathering of disparate information into one location that is easily and readily available. The method suggests that the inclusion of downstream life-cycle issues into the conceptual design phase reduces potential of defective, and sub-optimal composite structures. Three industry experts were interviewed extensively. The experts provided design rules, previous design cases, and test problems. A Knowledge Based Reasoning system was developed using the CLIPS (C Language Interpretive Procedural System) environment and a Case Based Reasoning System was developed using the Design Memory Utility For Sharing Experiences (MUSE) xviii environment. A Design Characteristic State (DCS) was used to document the design specifications, constraints, and problem areas using attribute-value pair relationships. The DCS provided consistent design information between the knowledge base and case base. Results indicated that the use of knowledge based and case based reasoning provided a robust design environment for composite structures. The knowledge base provided design guidance from well defined rules and procedural knowledge. The case base provided suggestions on design and manufacturing techniques based on previous similar designs and warnings of potential problems and pitfalls. The case base complemented the knowledge base and extended the problem solving capability beyond the existence of

Numerical modeling for longwall pillar design: a case study from a typical longwall panel in China

Science.gov (United States)

Zhang, Guangchao; Liang, Saijiang; Tan, Yunliang; Xie, Fuxing; Chen, Shaojie; Jia, Hongguo

2018-02-01

This paper presents a new numerical modeling procedure and design principle for longwall pillar design with the assistance of numerical simulation of FLAC3D. A coal mine located in Yanzhou city, Shandong Province, China, was selected for this case study. A meticulously validated numerical model was developed to investigate the stress changes across the longwall pillar with various sizes. In order to improve the reliability of the numerical modeling, a calibration procedure is undertaken to match the Salamon and Munro pillar strength formula for the coal pillar, while a similar calibration procedure is used to estimate the stress-strain response of a gob. The model results demonstrated that when the coal pillar width was 7-8 m, most of the vertical load was carried by the panel rib, whilst the gateroad was overall in a relatively low stress environment and could keep its stability with proper supports. Thus, the rational longwall pillar width was set as 8 m and the field monitoring results confirmed the feasibility of this pillar size. The proposed numerical simulation procedure and design principle presented in this study could be a viable alternative approach for longwall pillar design for other similar projects.

A new design approach to innovative spectrometers. Case study: TROPOLITE

Science.gov (United States)

Volatier, Jean-Baptiste; Baümer, Stefan; Kruizinga, Bob; Vink, Rob

2014-05-01

Designing a novel optical system is a nested iterative process. The optimization loop, from a starting point to final system is already mostly automated. However this loop is part of a wider loop which is not. This wider loop starts with an optical specification and ends with a manufacturability assessment. When designing a new spectrometer with emphasis on weight and cost, numerous iterations between the optical- and mechanical designer are inevitable. The optical designer must then be able to reliably produce optical designs based on new input gained from multidisciplinary studies. This paper presents a procedure that can automatically generate new starting points based on any kind of input or new constraint that might arise. These starting points can then be handed over to a generic optimization routine to make the design tasks extremely efficient. The optical designer job is then not to design optical systems, but to meta-design a procedure that produces optical systems paving the way for system level optimization. We present here this procedure and its application to the design of TROPOLITE a lightweight push broom imaging spectrometer.

Supporting Affect Regulation in Children With Multiple Disabilities During Psychotherapy: A Multiple Case Design Study of Therapeutic Attachment. [Miscellaneous Article

NARCIS (Netherlands)

Schuengel, C; Sterkenburg, P S; Jeczynski, P; Janssen, C G C; Jongbloed, G

2009-01-01

: In a controlled multiple case design study, the development of a therapeutic relationship and its role in affect regulation were studied in 6 children with visual disabilities, severe intellectual disabilities, severe challenging behavior, and prolonged social deprivation. In the 1st phase,

The order and priority of research and design method application within an assistive technology new product development process: a summative content analysis of 20 case studies.

Science.gov (United States)

Torrens, George Edward

2018-01-01

Summative content analysis was used to define methods and heuristics from each case study. The review process was in two parts: (1) A literature review to identify conventional research methods and (2) a summative content analysis of published case studies, based on the identified methods and heuristics to suggest an order and priority of where and when were used. Over 200 research and design methods and design heuristics were identified. From the review of the 20 case studies 42 were identified as being applied. The majority of methods and heuristics were applied in phase two, market choice. There appeared a disparity between the limited numbers of methods frequently used, under 10 within the 20 case studies, when hundreds were available. Implications for Rehabilitation The communication highlights a number of issues that have implication for those involved in assistive technology new product development: •The study defined over 200 well-established research and design methods and design heuristics that are available for use by those who specify and design assistive technology products, which provide a comprehensive reference list for practitioners in the field; •The review within the study suggests only a limited number of research and design methods are regularly used by industrial design focused assistive technology new product developers; and, •Debate is required within the practitioners working in this field to reflect on how a wider range of potentially more effective methods and heuristics may be incorporated into daily working practice.

Case Studies of Leading Edge Small Urban High Schools. Core Academic Strategic Designs: 3. University Park Campus School

Science.gov (United States)

Shields, Regis Anne; Ireland, Nicole; City, Elizabeth; Derderian, Julie; Miles, Karen Hawley

2008-01-01

This report is one of nine detailed case studies of small urban high schools that served as the foundation for the Education Resource Strategies (ERS) report "Strategic Designs: Lessons from Leading Edge Small Urban High Schools." These nine schools were dubbed "Leading Edge Schools" because they stand apart from other high…

Resiliency and affordability of housing design, Kampong Cieunteung-Bale Endah in Bandung Regency as a case study

Science.gov (United States)

Nurdini, Allis; Yovita, Wanda; Negri, Patriot

2017-12-01

Recently the discussion about resiliency and housing design has been fast developed, including design for housing on riverfront as marginal area that usually occupied by low income people. The low income people generally will be the worst affected community in flood disaster situation, because of their un-affordability to achieve quality housing design. In other side, the funding support capacity especially from the local government is limited, so that the resilient environment also need to be supported by the community itself. In this context, the study about low income people's affordability to achieve resilient housing design is essential. This study was conducted to identify two important points: the design choice and the affordability level of resilient housing from the community viewpoints. Kampong Cieunteung, in Bale Endah Area, Bandung Regency is chosen as a case study, because this area annually experience severe flood from overflow of the Citarum River branch. In preliminary research phase, approximately 60% of the Kampong Cieunteung's resident need to stay and become indication that the community need resilient housing design to accommodate their live hood. The next phase, the contingent valuation method was implemented to gain resilient design choice and affordability perspective from the community. It is concluded that the community have ability to choose the resilient housing design based on their aspiration and based on their ability to pay. The result indicates that resilient housing design should have character of optional, module co-operational, and incremental to be afforded by the low income people.

Stakeholder involvement in stages of a participatory process illustrated in interior design cases

DEFF Research Database (Denmark)

Vink, Peter; van Rhijn, Gu; Seim, Rikke

2008-01-01

In a previous study (Vink et al., 2008) an overview was made of the involvement of different stakeholders in a participatory design process. In this paper this overview was used to describe four participatory design cases focused on improvising productivity, health, and comfort by interior design....... It appeared that this overview is useful to describe the involvement in participatory interior design projects. However, it can only serve as an initial benchmark as much is dependent on the specific case at hand....

The Influence of Game Design on the Collaborative Problem Solving Process: A Cross-Case Study of Multi-Player Collaborative Gameplay Analysis

Science.gov (United States)

Yildirim, Nilay

2013-01-01

This cross-case study examines the relationships between game design attributes and collaborative problem solving process in the context of multi-player video games. The following game design attributes: sensory stimuli elements, level of challenge, and presentation of game goals and rules were examined to determine their influence on game…

The possible designation of the Mediterranean Sea as a SECA: A case study

DEFF Research Database (Denmark)

Panagakos, George P.; Stamatopoulou, Eirini V.; Psaraftis, Harilaos N.

2014-01-01

In view of the ongoing discussions concerning the possible designation of the Mediterranean Sea as a Sulphur Emission Control Area (SECA), a modal split model was applied to a case involving the transportation of consolidated cargoes between Thessaloniki, Greece and industrial hubs of northern...... with a small transport service provider, typical for Greece, and are based on actual trips made (revealed preferences). The results predict that the designation of the Mediterranean as a SECA will cause a modal shift in favour of the road-only route by 5.2%, which under certain assumptions can reach 17...

ED-WAVE tool design approach: Case of a textile wastewater treatment plant in Blantyre, Malawi

Science.gov (United States)

Chipofya, V.; Kraslawski, A.; Avramenko, Y.

The ED-WAVE tool is a PC based package for imparting training on wastewater treatment technologies. The system consists of four modules viz. Reference Library, Process Builder, Case Study Manager, and Treatment Adviser. The principles of case-based design and case-based reasoning as applied in the ED-WAVE tool are utilised in this paper to evaluate the design approach of the wastewater treatment plant at Mapeto David Whitehead & Sons (MDW&S) textile and garments factory, Blantyre, Malawi. The case being compared with MDW&S in the ED-WAVE tool is Textile Case 4 in Sri Lanka (2003). Equalisation, coagulation and rotating biological contactors is the sequencing of treatment units at Textile Case 4 in Sri Lanka. Screening, oxidation ditches and sedimentation is the sequencing of treatment units at MDW&S textile and garments factory. The study suggests that aerobic biological treatment is necessary in the treatment of wastewater from a textile and garments factory. MDW&S incorporates a sedimentation process which is necessary for the removal of settleable matter before the effluent is discharged to the municipal wastewater treatment plant. The study confirmed the practical use of the ED-WAVE tool in the design of wastewater treatment systems, where after encountering a new situation; already collected decision scenarios (cases) are invoked and modified in order to arrive at a particular design alternative. What is necessary, however, is to appropriately modify the case arrived at through the Case Study Manager in order to come up with a design appropriate to the local situation taking into account technical, socio-economic and environmental aspects.

Case-control studies in neurosurgery.

Science.gov (United States)

Nesvick, Cody L; Thompson, Clinton J; Boop, Frederick A; Klimo, Paul

2014-08-01

/intervention and true case-control studies was strengthened (OR 0.053, 95% CI 0.0064-0.44). There was a trend toward a negative association between the use of survival analysis or Kaplan-Meier curves and true case-control studies (OR 0.13, 95% CI 0.015-1.12). True case-control studies were no more likely than their counterparts to use a potential study design "expert" (OR 1.50, 95% CI 0.57-3.95). The overall average STROBE score was 72% (range 50-86%). Examples of reporting deficiencies were reporting of bias (28%), missing data (55%), and funding (44%). The results of this analysis show that the majority of studies in the neurosurgical literature that identify themselves as "case-control" studies are, in fact, labeled incorrectly. Positive and negative predictors were identified. The authors provide several recommendations that may reverse the incorrect and inappropriate use of the term "case-control" and improve the quality of design and reporting of true case-control studies in neurosurgery.

Barrier Free Park Design for the Disabled Persons: A Case Study of the KLCC Park

Directory of Open Access Journals (Sweden)

Hazreena Hussein

2006-12-01

Full Text Available Making green spaces accessible to as many people as possible is now mainstream thinking in planning, design and management. Green spaces call be internal or external, integrated or separated with building. The purpose of this paper is to investigate and identify the characteristics in creating green spaces for the disabled persons' to enjoy. This research is dedicated specially for those with sensory disabilities, i.e. visually impaired' persons.The research will focus on issues and constraints that seem to impede their basic necessity, which is a barrier to them in enjoying the green spaces alongside their sighted peers. However, this research can also be applied to other users such as children, elderly people, pregnant women and parent with strollers. An example of a case study selected is the Kuala Lumpur City Centre (KLCC Park, where the author will explore the objectives and design principles of the Park. The findings are intended to provide recommendation on appropriate design criteria for the visually impaired persons in helping to maintain and manage green spaces. This is also to provide general information on different type of plants, highlighting their value and use in design as advised by landscape architects.

The Application of an Engineering Design and Information Systems Case Study in a Senior Level Product Data Management Course

Science.gov (United States)

Connolly, Patrick

2011-01-01

This study examines the use of an engineering design and information systems case study over a three week period in a senior level class covering the topics of product data management (PDM) and product lifecycle management (PLM). Students that have taken the course in the past have struggled with the sometimes nebulous and difficult to…

Writing and Rewriting the Instructional Design Case: A View from Two Sides

Directory of Open Access Journals (Sweden)

Craig D. Howard, Rodney Myers

2011-01-01

Full Text Available This article analyzes five problem areas educators grapple with when writing designs cases about learning interventions. The article is written from the vantage point of IJDL’s assistant editor who edited, reviewed, and coordinated the reviews of design cases over a period of two years while also writing his own design case (Howard & Myers, 2010: International Journal of Designs for Learning. The knowledge building genre of the instructional design case is viewed from the perspective of commonalities between articles published in a Tech Trends feature, the Instructional Design Portfolio, and this venue. The areas of concern common among reviews for these publications shed light on how the design case is developing into a rigorous form of educational inquiry. The areas of concern brought up in reviews of cases are discussed in light of the author’s first hand experiences of satisfying reviewers’ concerns and, in turn, coaching other educators through the process of a finalized design case. Those common areas are: (1 situating the design, (2 describing the design, (3 depicting the experience of the design, (4 developing trustworthiness through transparency, analysis, and reflection (5 removing aspects of design cases which confound their purpose. Specific examples from design cases that have gone through peer review describe how author-educators may approach the dissemination of design precedent through the careful documentation of pedagogical designs.

Acoustical case studies of three green buildings

Science.gov (United States)

Siebein, Gary; Lilkendey, Robert; Skorski, Stephen

2005-04-01

Case studies of 3 green buildings with LEED certifications that required extensive acoustical retrofit work to become satisfactory work environments for their intended user groups will be used to define areas where green building design concepts and acoustical design concepts require reconciliation. Case study 1 is an office and conference center for a city environmental education agency. Large open spaces intended to collect daylight through clerestory windows provided large, reverberant volumes with few acoustic finishes that rendered them unsuitable as open office space and a conference room/auditorium. Case Study 2 describes one of the first gold LEED buildings in the southeast whose primary design concepts were so narrowly focused on thermal and lighting issues that they often worked directly against basic acoustical requirements resulting in sound levels of NC 50-55 in classrooms and faculty offices, crosstalk between classrooms and poor room acoustics. Case study 3 is an environmental education and conference center with open public areas, very high ceilings, and all reflective surfaces made from wood and other environmentally friendly materials that result in excessive loudness when the building is used by the numbers of people which it was intended to serve.

The therapeutic collaboration in life design counselling: The case of ...

African Journals Online (AJOL)

This study examined the therapeutic collaboration in a case of Life Design ... In globalised societies, job opportunities and employment conditions are fragile and unstable, requiring ..... balance of therapeutic exchanges involving suppor-.

Toolkit for healthcare facility design evaluation - some case studies

CSIR Research Space (South Africa)

De Jager, Peta

2007-10-01

Full Text Available themes in approach. Further study is indicated, but preliminary research shows that, whilst these toolkits can be applied to the South African context, there are compelling reasons for them to be adapted. This paper briefly outlines these three case...

Toolkit for healthcare facility design evaluation - some case studies.

CSIR Research Space (South Africa)

De Jager, Peta

2007-10-01

Full Text Available themes in approach. Further study is indicated, but preliminary research shows that, whilst these toolkits can be applied to the South African context, there are compelling reasons for them to be adapted. This paper briefly outlines these three case...

An Evaluation of Current Stormwater Best Management Practice Relationships Between Design and Efficiency: A Series of Local and National Case Studies

OpenAIRE

Goodwin, Amanda Ann

2013-01-01

Water quality continues to be threatened by human development activities such as stormwater runoff from urbanization. This study addresses the question of how stormwater Best Management Practice (BMP) system design choices affect pollutant removal efficiency, through the examination of 12 case study sites (across five states) that use three common BMP system design types (detention, retention, and wetland channel). Water quality information was obtained from the International Stormwater Datab...

Design criteria monograph for pressurized metal cases

Science.gov (United States)

1972-01-01

Organiation and presentation of data pertaining to design of solid propellant rocket engine cases are discussed. Design criteria are presented in form of monograph based on accumulated experience and knowledge. Improvements in reliability, cost effectiveness, and engine efficiency are stressed.

Integration of case study approach, project design and computer ...

African Journals Online (AJOL)

pc

2018-03-05

Mar 5, 2018 ... computer modeling used as a research method applied in the process ... conclusions discuss the benefits for students who analyzed the ... accounting education process the case study method should not .... providing travel safety information to passengers ... from literature readings with practical problems.

Clean Cities Case Study: Barwood Cab Fleet Study Summary

International Nuclear Information System (INIS)

Whalen, P.

1999-01-01

Barwood Cab Fleet Study Summary is the second in a new series called''Alternative Fuel Information Case Studies,'' designed to present real-world experiences with alternative fuels to fleet managers and other industry stakeholders

Passive solar design studies for non-domestic buildings. Case studies

Energy Technology Data Exchange (ETDEWEB)

1988-01-01

Of the passive solar designs reported, those for a light industrial building, a nurses hostel and a low rise office block were considered to be clearly cost effective. A retrofit study of a secondary school showed that incorporating passive solar measures into refurbishment could be cost effective. Designs for a sports hall and medium rise office block were considered to be only marginally cost effective and those for a hotel bedroom block and DIY superstore were judged not to be cost effective. The maximization of daylight penetration coupled with controls on the lighting systems produced the main energy saving. This orientation, built form, fenestration, window shape, perimeter (and overhead) daylight and atria were primary solar features. Direct gain considered in conjunction with building weight/response factor could contribute to a lesser degree. Trombe walls were shown to be generally uneconomic for this type of building and conservatories contributed to amenity value more than to savings.

Design and implementation of pay-for-quality in primary healthcare: A case study from Iran

Directory of Open Access Journals (Sweden)

Jafar Sadegh Tabrizi

2017-06-01

Full Text Available Background The common methods of payment to healthcare providers such as capitation and salary are not designed to be stimulation for high quality healthcare. The pay-for -quality (P4Q programs are designed to provide the financial incentives to the service providers in order to improve quality of services based on specified criteria. Aims This study describes the design and implementation of a P4Q program in the primary healthcare (PHc in East Azerbaijan Province, Iran. Methods The present study is a case study that describes the process of designing and implementing the P4Q program in PHC in East-Azerbaijan province in 2015. To design the P4Q program, after identifying core components of the program through literature review and Focus Group Discussion (FGD, final decision about each component was made by achieving consensus from a panel of recognised experts in the area of PHc. Altogether two FGD and seven expert panel sessions were hold in EAPHC in order to design the P4Q program. Results Key components of P4Q program were selected by qualitative studies and the results were categorized in five headings including P4Q formula, quality measures, payment strategy, data reporting and performance evaluation. The formula consists of five elements including fixed payment, individual, team and organization performance and managerial appraisal. A total of 37 measures, which covers the domains of quality of PHc, human resource development and responsibility were selected. ‘Improvement’ and ‘absolute level of measures’ were selected as the payment strategy. The methods of data reporting included valid questionnaire, organization’s documents and medical records. The final P4Q program was used for paying incentives to all primary health care providers in public health centres affiliated to Tabriz University of Medical Sciences. Conclusion Designing and implementing the P4Q program led to a shift in paying the incentives to healthcare providers

Evolutionary experience design – the case of Otopia

DEFF Research Database (Denmark)

Hansen, Kenneth

experiences with the case of “Otopia”. “Otopia” is a large scale, new media experiment, which combines the areas of computer games, sports and performance in to a spectator oriented concept; it was premiered in a dome tent at the Roskilde Festival in Denmark the summer 2005. This paper presents and discusses......The design of experiences is a complicated challenge. It might not even be possible to design such a “thing”, but only to design for it. If this is the case it could seem appropriate with an evolutionary approach. This paper introduces such an approach to the design of new public oriented...... used as a means of specifying the basic immaterial design form. This discussion leads to the suggestion of a rule-based evolutionary model for the design of situations as a practical option for designers of new spectator oriented experiences in the future The project of Otopia was supported...

Theory Testing Using Case Studies

DEFF Research Database (Denmark)

Sørensen, Pernille Dissing; Løkke, Ann-Kristina

2006-01-01

design. Finally, we discuss the epistemological logic, i.e., the value to larger research programmes, of such studies and, following Lakatos, conclude that the value of theory-testing case studies lies beyond naïve falsification and in their contribution to developing research programmes in a progressive...

Design for happiness : A telehomecare product case

NARCIS (Netherlands)

Schot, M.; Desmet, P.M.A.; Van Dijk, M.B.; Schoone-Harmsen, M.

2009-01-01

In this paper a design approach is introduced for designing products to increase happiness. Happiness reflects the degree to which people’s concerns are fulfilled. Based on this fact, a framework of all human concerns was created. After that, the framework was applied to a telehomecare case.

A Case Study in CAD Design Automation

Science.gov (United States)

Lowe, Andrew G.; Hartman, Nathan W.

2011-01-01

Computer-aided design (CAD) software and other product life-cycle management (PLM) tools have become ubiquitous in industry during the past 20 years. Over this time they have continuously evolved, becoming programs with enormous capabilities, but the companies that use them have not evolved their design practices at the same rate. Due to the…

Case study of siting technology for underground nuclear power plant

International Nuclear Information System (INIS)

Hibino, Satoshi; Komada, Hiroya; Honsho, Shizumitsu; Fujiwara, Yoshikazu; Motojima, Mutsumi; Nakagawa, Kameichiro; Nosaki, Takashi

1991-01-01

Underground siting method is one of new feasible siting methods for nuclear power plants. This report presents the results on case studies on underground siting. Two sites of a steeply inclined and plateau like configurations were selected. 'Tunnel type cavern; all underground siting' method was applied for the steeply inclined configuration, and 'shaft type semi-cavern; partial underground siting' method was applied for the plateau like configuration. The following designs were carried out for these two sites as case studies; (1) conceptual designs, (2) geological surveys and rock mechanics tests, (3) stability analysis during cavern excavations, (4) seismic stability analysis of caverns during earthquake, (5) reinforcement designs for caverns, (6) drainage designs. The case studies showed that these two cases were fully feasible, and comparison between two cases revealed that the 'shaft type semi-cavern; partial underground siting' method was more suitable for Japanese islands. As a first step of underground siting, therefore, the authors recommend to construct a nuclear power plant by this method. (author)

Case Studies of Leading Edge Small Urban High Schools. Relevance Strategic Designs: 5. Life Academy of Health and Bioscience

Science.gov (United States)

Shields, Regis Anne; Ireland, Nicole; City, Elizabeth; Derderian, Julie; Miles, Karen Hawley

2008-01-01

This report is one of nine detailed case studies of small urban high schools that served as the foundation for the Education Resource Strategies (ERS) report "Strategic Designs: Lessons from Leading Edge Small Urban High Schools." These nine schools were dubbed "Leading Edge Schools" because they stand apart from other high…

Case Studies of Leading Edge Small Urban High Schools. Core Academic Strategic Designs: 1. Academy of the Pacific Rim

Science.gov (United States)

Shields, Regis Anne; Ireland, Nicole; City, Elizabeth; Derderian, Julie; Miles, Karen Hawley

2008-01-01

This report is one of nine detailed case studies of small urban high schools that served as the foundation for the Education Resource Strategies (ERS) report "Strategic Designs: Lessons from Leading Edge Small Urban High Schools." These nine schools were dubbed "Leading Edge Schools" because they stand apart from other high…

Case Studies of Leading Edge Small Urban High Schools. Core Academic Strategic Designs: 2. Noble Street Charter High School

Science.gov (United States)

Shields, Regis Anne; Ireland, Nicole; City, Elizabeth; Derderian, Julie; Miles, Karen Hawley

2008-01-01

This report is one of nine detailed case studies of small urban high schools that served as the foundation for the Education Resource Strategies (ERS) report "Strategic Designs: Lessons from Leading Edge Small Urban High Schools." These nine schools were dubbed "Leading Edge Schools" because they stand apart from other high…

The Misconception of Case-Control Studies in the Plastic Surgery Literature: A Literature Audit.

Science.gov (United States)

Hatchell, Alexandra C; Farrokhyar, Forough; Choi, Matthew

2017-06-01

Case-control study designs are commonly used. However, many published case-control studies are not true case-controls and are in fact mislabeled. The purpose of this study was to identify all case-control studies published in the top three plastic surgery journals over the past 10 years, assess which were truly case-control studies, clarify the actual design of the articles, and address common misconceptions. MEDLINE, Embase, and Web of Science databases were searched for case-control studies in the three highest-impact factor plastic surgery journals (2005 to 2015). Two independent reviewers screened the resulting titles, abstracts, and methods, if applicable, to identify articles labeled as case-control studies. These articles were appraised and classified as true case-control studies or non-case-control studies. The authors found 28 articles labeled as case-control studies. However, only six of these articles (21 percent) were truly case-control designs. Of the 22 incorrectly labeled studies, one (5 percent) was a randomized controlled trial, three (14 percent) were nonrandomized trials, two (9 percent) were prospective comparative cohort designs, 14 (64 percent) were retrospective comparative cohort designs, and two (9 percent) were cross-sectional designs. The mislabeling was worse in recent years, despite increases in evidence-based medicine awareness. The majority of published case-control studies are not in fact case-control studies. This misunderstanding is worsening with time. Most of these studies are actually comparative cohort designs. However, some studies are truly clinical trials and thus a higher level of evidence than originally proposed.

Interactive Level Design for iOS Assignment Delivery: A Case Study

Directory of Open Access Journals (Sweden)

Anson Brown

2014-02-01

Full Text Available This paper presents an application of an iOS-based online gaming assignment in a real classroom. The core concept of the project is a gameplay environment involving two players that have full control over creation and modification of levels. This level design mechanism was implemented in an iOS-based game in the area of genetics and based on an existing written assignment. The game includes support for both instructors, who have the ability to create and post assignments and students, who can take the assignments. Two trials of the iOS application consisted of in-class testing of twenty- one students. Students first took the original paper assignment, followed by the iOS version. Start times, end times, and grades were recorded for both versions. A comprehensive study of the grades and times for the iOS version of the assignment versus the paper version was conducted and is presented in this paper. Our Study showed that the iOS version was completed much faster in nearly every case while a strong delivery mechanism is needed to ensure student grades and completion of the assignment will not be affected. These results are not unexpected due to some major difference between the two formats. Future updates and additions will address any currently existing issues.

Safety assessment in plant layout design using indexing approach: implementing inherent safety perspective. Part 2-Domino Hazard Index and case study.

Science.gov (United States)

Tugnoli, Alessandro; Khan, Faisal; Amyotte, Paul; Cozzani, Valerio

2008-12-15

The design of layout plans requires adequate assessment tools for the quantification of safety performance. The general focus of the present work is to introduce an inherent safety perspective at different points of the layout design process. In particular, index approaches for safety assessment and decision-making in the early stages of layout design are developed and discussed in this two-part contribution. Part 1 (accompanying paper) of the current work presents an integrated index approach for safety assessment of early plant layout. In the present paper (Part 2), an index for evaluation of the hazard related to the potential of domino effects is developed. The index considers the actual consequences of possible escalation scenarios and scores or ranks the subsequent accident propagation potential. The effects of inherent and passive protection measures are also assessed. The result is a rapid quantification of domino hazard potential that can provide substantial support for choices in the early stages of layout design. Additionally, a case study concerning selection among various layout options is presented and analyzed. The case study demonstrates the use and applicability of the indices developed in both parts of the current work and highlights the value of introducing inherent safety features early in layout design.

Automated simulation and study of spatial-structural design processes

NARCIS (Netherlands)

Davila Delgado, J.M.; Hofmeyer, H.; Stouffs, R.; Sariyildiz, S.

2013-01-01

A so-called "Design Process Investigation toolbox" (DPI toolbox), has been developed. It is a set of computational tools that simulate spatial-structural design processes. Its objectives are to study spatial-structural design processes and to support the involved actors. Two case-studies are

Case Study: Testing with Case Studies

Science.gov (United States)

Herreid, Clyde Freeman

2015-01-01

This column provides original articles on innovations in case study teaching, assessment of the method, as well as case studies with teaching notes. This month's issue discusses using case studies to test for knowledge or lessons learned.

Choosing between responsive-design websites versus mobile apps for your mobile behavioral intervention: presenting four case studies.

Science.gov (United States)

Turner-McGrievy, Gabrielle M; Hales, Sarah B; Schoffman, Danielle E; Valafar, Homay; Brazendale, Keith; Weaver, R Glenn; Beets, Michael W; Wirth, Michael D; Shivappa, Nitin; Mandes, Trisha; Hébert, James R; Wilcox, Sara; Hester, Andrew; McGrievy, Matthew J

2017-06-01

Both mobile apps and responsive-design websites (web apps) can be used to deliver mobile health (mHealth) interventions, but it can be difficult to discern which to use in research. The goal of this paper is to present four case studies from behavioral interventions that developed either a mobile app or a web app for research and present an information table to help researchers determine which mobile option would work best for them. Four behavioral intervention case studies (two developed a mobile app, and two developed a web app) presented include time, cost, and expertise. Considerations for adopting a mobile app or a web app-such as time, cost, access to programmers, data collection, security needs, and intervention components- are presented. Future studies will likely integrate both mobile app and web app modalities. The considerations presented here can help guide researchers on which platforms to choose prior to starting an mHealth intervention.

a case study ondo state

African Journals Online (AJOL)

user

the design of a Government Cloud (G-Cloud) network for Ondo State Government which will ... network for a developing economy; a case study of ... France is one of those countries that favour .... Arequipa city. .... Where region 0 = Akure, 1 =.

Human-centered approaches in geovisualization design: investigating multiple methods through a long-term case study.

Science.gov (United States)

Lloyd, David; Dykes, Jason

2011-12-01

Working with three domain specialists we investigate human-centered approaches to geovisualization following an ISO13407 taxonomy covering context of use, requirements and early stages of design. Our case study, undertaken over three years, draws attention to repeating trends: that generic approaches fail to elicit adequate requirements for geovis application design; that the use of real data is key to understanding needs and possibilities; that trust and knowledge must be built and developed with collaborators. These processes take time but modified human-centred approaches can be effective. A scenario developed through contextual inquiry but supplemented with domain data and graphics is useful to geovis designers. Wireframe, paper and digital prototypes enable successful communication between specialist and geovis domains when incorporating real and interesting data, prompting exploratory behaviour and eliciting previously unconsidered requirements. Paper prototypes are particularly successful at eliciting suggestions, especially for novel visualization. Enabling specialists to explore their data freely with a digital prototype is as effective as using a structured task protocol and is easier to administer. Autoethnography has potential for framing the design process. We conclude that a common understanding of context of use, domain data and visualization possibilities are essential to successful geovis design and develop as this progresses. HC approaches can make a significant contribution here. However, modified approaches, applied with flexibility, are most promising. We advise early, collaborative engagement with data – through simple, transient visual artefacts supported by data sketches and existing designs – before moving to successively more sophisticated data wireframes and data prototypes. © 2011 IEEE

Masked Visual Analysis: Minimizing Type I Error in Visually Guided Single-Case Design for Communication Disorders

Science.gov (United States)

Byun, Tara McAllister; Hitchcock, Elaine R.; Ferron, John

2017-01-01

Purpose: Single-case experimental designs are widely used to study interventions for communication disorders. Traditionally, single-case experiments follow a response-guided approach, where design decisions during the study are based on participants' observed patterns of behavior. However, this approach has been criticized for its high rate of…

Persistent User Bias in Case-Crossover Studies in Pharmacoepidemiology

DEFF Research Database (Denmark)

Hallas, Jesper; Pottegård, Anton; Wang, Shirley

2016-01-01

Studying the effect of chronic medication exposure by means of a case-crossover design may result in an upward-biased odds ratio. In this study, our aim was to assess the occurrence of this bias and to evaluate whether it is remedied by including a control group (the case-time-control design...... for the retinal detachment controls were similar, leading to near-null case-time-control estimates for all 3 medication classes. For wrist fracture and stroke, the odds ratios were higher for cases than for controls, and case-time-control odds ratios were consistently above unity, thus implying significant...... residual bias. In case-crossover studies of medications, contamination by persistent users confers a moderate bias upward, which is partly remedied by using a control group. The optimal strategy for dealing with this problem is currently unknown....

The networked student: A design-based research case study of student constructed personal learning environments in a middle school science course

Science.gov (United States)

Drexler, Wendy

This design-based research case study applied a networked learning approach to a seventh grade science class at a public school in the southeastern United States. Students adapted emerging Web applications to construct personal learning environments for in-depth scientific inquiry of poisonous and venomous life forms. The personal learning environments constructed used Application Programming Interface (API) widgets to access, organize, and synthesize content from a number of educational Internet resources and social network connections. This study examined the nature of personal learning environments; the processes students go through during construction, and patterns that emerged. The project was documented from both an instructional and student-design perspective. Findings revealed that students applied the processes of: practicing digital responsibility; practicing digital literacy; organizing content; collaborating and socializing; and synthesizing and creating. These processes informed a model of the networked student that will serve as a framework for future instructional designs. A networked learning approach that incorporates these processes into future designs has implications for student learning, teacher roles, professional development, administrative policies, and delivery. This work is significant in that it shifts the focus from technology innovations based on tools to student empowerment based on the processes required to support learning. It affirms the need for greater attention to digital literacy and responsibility in K12 schools as well as consideration for those skills students will need to achieve success in the 21st century. The design-based research case study provides a set of design principles for teachers to follow when facilitating student construction of personal learning environments.

Mobile Variable Depth Sampling System Design Study

International Nuclear Information System (INIS)

BOGER, R.M.

2000-01-01

A design study is presented for a mobile, variable depth sampling system (MVDSS) that will support the treatment and immobilization of Hanford LAW and HLW. The sampler can be deployed in a 4-inch tank riser and has a design that is based on requirements identified in the Level 2 Specification (latest revision). The waste feed sequence for the MVDSS is based on Phase 1, Case 3S6 waste feed sequence. Technical information is also presented that supports the design study

Mobile Variable Depth Sampling System Design Study

Energy Technology Data Exchange (ETDEWEB)

BOGER, R.M.

2000-08-25

A design study is presented for a mobile, variable depth sampling system (MVDSS) that will support the treatment and immobilization of Hanford LAW and HLW. The sampler can be deployed in a 4-inch tank riser and has a design that is based on requirements identified in the Level 2 Specification (latest revision). The waste feed sequence for the MVDSS is based on Phase 1, Case 3S6 waste feed sequence. Technical information is also presented that supports the design study.

Model-based design languages: A case study

OpenAIRE

Cibrario Bertolotti, Ivan; Hu, Tingting; Navet, Nicolas

2017-01-01

Fast-paced innovation in the embedded systems domain puts an ever increasing pressure on effective software development methods, leading to the growing popularity of Model-Based Design (MBD). In this context, a proper choice of modeling languages and related tools - depending on design goals and problem qualities - is crucial to make the most of MBD benefits. In this paper, a comparison between two dissimilar approaches to modeling is carried out, with the goal of highlighting their relative ...

Case Study Observational Research: A Framework for Conducting Case Study Research Where Observation Data Are the Focus.

Science.gov (United States)

Morgan, Sonya J; Pullon, Susan R H; Macdonald, Lindsay M; McKinlay, Eileen M; Gray, Ben V

2017-06-01

Case study research is a comprehensive method that incorporates multiple sources of data to provide detailed accounts of complex research phenomena in real-life contexts. However, current models of case study research do not particularly distinguish the unique contribution observation data can make. Observation methods have the potential to reach beyond other methods that rely largely or solely on self-report. This article describes the distinctive characteristics of case study observational research, a modified form of Yin's 2014 model of case study research the authors used in a study exploring interprofessional collaboration in primary care. In this approach, observation data are positioned as the central component of the research design. Case study observational research offers a promising approach for researchers in a wide range of health care settings seeking more complete understandings of complex topics, where contextual influences are of primary concern. Future research is needed to refine and evaluate the approach.

Worst-case execution time analysis-driven object cache design

DEFF Research Database (Denmark)

Huber, Benedikt; Puffitsch, Wolfgang; Schoeberl, Martin

2012-01-01

result in a WCET analysis‐friendly design. Aiming for a time‐predictable design, we therefore propose to employ WCET analysis techniques for the design space exploration of processor architectures. We evaluated different object cache configurations using static analysis techniques. The number of field......Hard real‐time systems need a time‐predictable computing platform to enable static worst‐case execution time (WCET) analysis. All performance‐enhancing features need to be WCET analyzable. However, standard data caches containing heap‐allocated data are very hard to analyze statically....... In this paper we explore a new object cache design, which is driven by the capabilities of static WCET analysis. Simulations of standard benchmarks estimating the expected average case performance usually drive computer architecture design. The design decisions derived from this methodology do not necessarily...

Universal design of workplaces through the use of Poka-Yokes: Case study and implications

Directory of Open Access Journals (Sweden)

Cristóbal Miralles

2011-10-01

Full Text Available Purpose: Employment plays an important part in many people’s lives beyond merely providing income, since continued participation in work can have many therapeutic benefits for workers defined as disabled. However, disabled workers face a range of barriers to employment, despite legislation intended to improve workplace accessibility emphasizing adaptations to the workplace, which many employers often find difficult and expensive. The Poka-Yoke approach was developed in the manufacturing industry as a way of improving productivity by reducing errors using often very simple adaptations. This paper argues that, as Poka-Yokes are designed to make life easier and improve the performance of workers without impairments, they are closer to the philosophy of Universal Design than to Accessible Design, and offer an easy and inclusive way of making work more accessible for all kind of workers. Design/methodology/approach: This paper provides a case study demonstrating the use of the Poka-Yoke approach in a sheltered work centre for disabled; highlighting how they served to improve accessibility to work by fulfilling Universal Design principles. Findings: Our research allows us to demonstrate the great potential of Poka-yokes for gaining accessibility to the workplace. The real application of this approach, both in sheltered work centres and ordinary companies, can contribute to improve the high unemployment rates of disabled people. Research limitations/implications: The proposal is innovative and was applied in one specific company. Thus, a range of customized Poka-yokes would be desirable for different industrial sectors. Practical implications: Managers of sheltered work centres, and also of ordinary companies, can realize about the great potential of Poka-Yokes as an easy means of gaining flexibility and accessibility. Originality/value: There are very few papers relating lean manufacturing tools and disability. Our approach analyzes the benefits of

Case Study Research in Software Engineering Guidelines and Examples

CERN Document Server

Runeson, Per; Rainer, Austen; Regnell, Bjorn

2012-01-01

Based on their own experiences of in-depth case studies of software projects in international corporations, in this book the authors present detailed practical guidelines on the preparation, conduct, design and reporting of case studies of software engineering.  This is the first software engineering specific book on the case study research method.

Making Professional Development Flexible: A Case Study.

Science.gov (United States)

Forsyth, Rachel

2002-01-01

Presents a case study of an online course that was designed for staff professional development at Manchester Metropolitan University (United Kingdom). Discusses the flexibility of online courses; course design; activities for short online workshops; evaluation methods for course evaluation; and results of participant questionnaires. (LRW)

Design method of large-diameter rock-socketed pile with steel casing

Science.gov (United States)

Liu, Ming-wei; Fang, Fang; Liang, Yue

2018-02-01

There is a lack of the design and calculation method of large-diameter rock-socketed pile with steel casing. Combined with the “twelfth five-year plan” of the National Science & Technology Pillar Program of China about “Key technologies on the ports and wharfs constructions of the mountain canalization channels”, this paper put forward the structured design requirements of concrete, steel bar distribution and steel casing, and a checking calculation method of the bearing capacity of the normal section of the pile and the maximum crack width at the bottom of the steel casing. The design method will have some degree of guiding significance for the design of large-diameter rock-socketed pile with steel casing.

Case study: design, operation, maintenance and water quality management of sustainable storm water ponds for roof runoff.

Science.gov (United States)

Scholz, Miklas

2004-12-01

The purpose of this case study was to optimise design, operation and maintenance guidelines, and to assess the water treatment potential of a storm water pond system after 15 months of operation. The system was based on a combined silt trap, attenuation pond and vegetated infiltration basin. This combination was used as the basis for construction of a roof water runoff system from a single domestic property. United Kingdom Building Research Establishment and Construction Industry Research and Information Association, and German Association for Water, Wastewater and Waste design guidelines were tested. These design guidelines failed because they did not consider local conditions. The infiltration function for the infiltration basin was logarithmic. Algal control techniques were successfully applied, and treatment of rainwater runoff from roofs was found to be largely unnecessary for recycling (e.g., watering plants). However, seasonal and diurnal variations of biochemical oxygen demand, dissolved oxygen and pH were recorded.

Post processing of Design Load Cases using Pdap

DEFF Research Database (Denmark)

Pedersen, Mads Mølgaard

Pdap provides functions for post-processing and documentation of a set of hawc2 result files, e.g. a full design load case. This report describes the input and its syntax, the mathematical foundation and the output in terms of statistic files and standard reports.......Pdap provides functions for post-processing and documentation of a set of hawc2 result files, e.g. a full design load case. This report describes the input and its syntax, the mathematical foundation and the output in terms of statistic files and standard reports....

Research designs and making causal inferences from health care studies.

Science.gov (United States)

Flannelly, Kevin J; Jankowski, Katherine R B

2014-01-01

This article summarizes the major types of research designs used in healthcare research, including experimental, quasi-experimental, and observational studies. Observational studies are divided into survey studies (descriptive and correlational studies), case-studies and analytic studies, the last of which are commonly used in epidemiology: case-control, retrospective cohort, and prospective cohort studies. Similarities and differences among the research designs are described and the relative strength of evidence they provide is discussed. Emphasis is placed on five criteria for drawing causal inferences that are derived from the writings of the philosopher John Stuart Mill, especially his methods or canons. The application of the criteria to experimentation is explained. Particular attention is given to the degree to which different designs meet the five criteria for making causal inferences. Examples of specific studies that have used various designs in chaplaincy research are provided.

Handling uncertainty in bioenergy policy design – A case study analysis of UK and German bioelectricity policy instruments

International Nuclear Information System (INIS)

Purkus, Alexandra; Röder, Mirjam; Gawel, Erik; Thrän, Daniela; Thornley, Patricia

2015-01-01

In designing policies to promote bioenergy, policy makers face challenges concerning uncertainties about the sustainability of bioenergy pathways (including greenhouse gas balances), technology and resource costs, or future energy market framework conditions. New information becomes available with time, but policy adjustments can involve high levels of adaptation costs. To enable an effective steering of technology choices and innovation, policies have to strike a balance between creating a consistent institutional framework, which establishes planning security for investors, and sufficient flexibility to adapt to new information. This paper examines implications of economic theory for handling cost and benefit uncertainty in bioelectricity policy design, focussing on choices between price and quantity instruments, technology differentiation, and policy adjustment. Findings are applied to two case studies, the UK's Renewables Obligation and the German feed-in tariff/feed-in premium scheme. Case study results show the trade-offs that are involved in instrument choice and design – depending on political priorities and a country's specific context, different options can prove more adequate. Combining market-based remuneration with sustainability criteria results in strong incentives for bioenergy producers to search for low-cost solutions; whereas cost-based price instruments with centrally steered technology and feedstock choices offer higher planning security for investors and more direct control for policy makers over what pathways are implemented. Independent of the choice of instrument type and technology differentiation mechanism, findings emphasise the importance of a careful policy design, which determines the exact balance between performance criteria such as cost control, incentive intensity, planning security and adaptive efficiency. - Highlights: • Bioelectricity policy design must deal with simultaneous cost and benefit uncertainty. �

The household contact study design for genetic epidemiological studies of infectious diseases

Directory of Open Access Journals (Sweden)

Catherine eStein

2013-04-01

Full Text Available Most genetic epidemiological study designs fall into one of two categories: family-based and population-based (case-control. However, recent advances in statistical genetics call for study designs that combine these two approaches. We describe the household contact study design as we have applied it in our several years of study of the epidemiology of tuberculosis. Though we highlight its applicability for genetic epidemiological studies of infectious diseases, there are many facets of this design that are appealing for modern genetic studies, including the simultaneous enrollment of related and unrelated individuals, closely and distantly related individuals, collection of extensive epidemiologic and phenotypic data, and evaluation of effects of shared environment and gene by environment interaction. These study design characteristics are particularly appealing for current sequencing studies.

Designing groupwork activities: a case study

OpenAIRE

Durant, Alan

1996-01-01

This chapter starts from college teachers’ frequent recognition that pedagogic materials, in ‘language through literature’ as in many other fields, often work best when designed with a particular group (or at least kind) of student in mind, and with sensitivity to linguistic, cultural and other factors which characterise a given teaching situation. Despite widespread acknowledgement of the value in targeting materials this way, however, not much importance is given in teacher-development or d...

Managing multi-architect collaborative design: case study of design competition for Ground Zero in New York

NARCIS (Netherlands)

Sebastian, R.

2006-01-01

This paper presents a part of the PhD research by the author that responds to the need of an innovative approach to manage collaborative design in the conceptual design phase of a multi-architect building project. The research studied recent multi-architect building projects in the Netherlands,

QuantifyMe: An Open-Source Automated Single-Case Experimental Design Platform

Directory of Open Access Journals (Sweden)

Sara Taylor

2018-04-01

Full Text Available Smartphones and wearable sensors have enabled unprecedented data collection, with many products now providing feedback to users about recommended step counts or sleep durations. However, these recommendations do not provide personalized insights that have been shown to be best suited for a specific individual. A scientific way to find individualized recommendations and causal links is to conduct experiments using single-case experimental design; however, properly designed single-case experiments are not easy to conduct on oneself. We designed, developed, and evaluated a novel platform, QuantifyMe, for novice self-experimenters to conduct proper-methodology single-case self-experiments in an automated and scientific manner using their smartphones. We provide software for the platform that we used (available for free on GitHub, which provides the methodological elements to run many kinds of customized studies. In this work, we evaluate its use with four different kinds of personalized investigations, examining how variables such as sleep duration and regularity, activity, and leisure time affect personal happiness, stress, productivity, and sleep efficiency. We conducted a six-week pilot study (N = 13 to evaluate QuantifyMe. We describe the lessons learned developing the platform and recommendations for its improvement, as well as its potential for enabling personalized insights to be scientifically evaluated in many individuals, reducing the high administrative cost for advancing human health and wellbeing.

QuantifyMe: An Open-Source Automated Single-Case Experimental Design Platform.

Science.gov (United States)

Taylor, Sara; Sano, Akane; Ferguson, Craig; Mohan, Akshay; Picard, Rosalind W

2018-04-05

Smartphones and wearable sensors have enabled unprecedented data collection, with many products now providing feedback to users about recommended step counts or sleep durations. However, these recommendations do not provide personalized insights that have been shown to be best suited for a specific individual. A scientific way to find individualized recommendations and causal links is to conduct experiments using single-case experimental design; however, properly designed single-case experiments are not easy to conduct on oneself. We designed, developed, and evaluated a novel platform, QuantifyMe, for novice self-experimenters to conduct proper-methodology single-case self-experiments in an automated and scientific manner using their smartphones. We provide software for the platform that we used (available for free on GitHub), which provides the methodological elements to run many kinds of customized studies. In this work, we evaluate its use with four different kinds of personalized investigations, examining how variables such as sleep duration and regularity, activity, and leisure time affect personal happiness, stress, productivity, and sleep efficiency. We conducted a six-week pilot study ( N = 13) to evaluate QuantifyMe. We describe the lessons learned developing the platform and recommendations for its improvement, as well as its potential for enabling personalized insights to be scientifically evaluated in many individuals, reducing the high administrative cost for advancing human health and wellbeing.

Deriving Design Flood Hydrograph Based on Conditional Distribution: A Case Study of Danjiangkou Reservoir in Hanjiang Basin

Directory of Open Access Journals (Sweden)

Changjiang Xu

2016-01-01

Full Text Available Design flood hydrograph (DFH for a dam is the flood of suitable probability and magnitude adopted to ensure safety of the dam in accordance with appropriate design standards. Estimated quantiles of peak discharge and flood volumes are necessary for deriving the DFH, which are mutually correlated and need to be described by multivariate analysis methods. The joint probability distributions of peak discharge and flood volumes were established using copula functions. Then the general formulae of conditional most likely composition (CMLC and conditional expectation composition (CEC methods that consider the inherent relationship between flood peak and volumes were derived for estimating DFH. The Danjiangkou reservoir in Hanjiang basin was selected as a case study. The design values of flood volumes and 90% confidence intervals with different peak discharges were estimated by the proposed methods. The performance of CMLC and CEC methods was also compared with conventional flood frequency analysis, and the results show that CMLC method performs best for both bivariate and trivariate distributions which has the smallest relative error and root mean square error. The proposed CMLC method has strong statistical basis with unique design flood composition scheme and provides an alternative way for deriving DFH.

Space engineering modeling and optimization with case studies

CERN Document Server

Pintér, János

2016-01-01

This book presents a selection of advanced case studies that cover a substantial range of issues and real-world challenges and applications in space engineering. Vital mathematical modeling, optimization methodologies and numerical solution aspects of each application case study are presented in detail, with discussions of a range of advanced model development and solution techniques and tools. Space engineering challenges are discussed in the following contexts: •Advanced Space Vehicle Design •Computation of Optimal Low Thrust Transfers •Indirect Optimization of Spacecraft Trajectories •Resource-Constrained Scheduling, •Packing Problems in Space •Design of Complex Interplanetary Trajectories •Satellite Constellation Image Acquisition •Re-entry Test Vehicle Configuration Selection •Collision Risk Assessment on Perturbed Orbits •Optimal Robust Design of Hybrid Rocket Engines •Nonlinear Regression Analysis in Space Engineering< •Regression-Based Sensitivity Analysis and Robust Design ...

An Industrial Case Study: Identification of Competencies of Design Engineers

DEFF Research Database (Denmark)

Ahmed, Saeema

2007-01-01

identified and the importance of these for design engineers in industry was investigated. In addition, the number of years of relevant experience required to become an expert in these types of knowledge was investigated. Knowledge related to the process was perceived as more important to those related......This paper describes the findings from an empirical study carried out with engineers in senior roles within a large company manufacturing complex products. This research aimed to identify the types of knowledge that are important for design engineers. Twenty-four knowledge categories were...... to the product. However, the number of years to become an expert in process knowledge was found to be lower than for product knowledge, despite process knowledge being perceived as more important. The findings of this research contribute to the education and training of design engineers....

The International Children’s Digital Library: A Case Study in Designing for a Multilingual, Multicultural, Multigenerational Audience

Directory of Open Access Journals (Sweden)

Hilary Browne Hutchinson

2005-03-01

Full Text Available The challenges encountered in building the InternationalChildren’s Digital Library (ICDL, a freely availableonline library of children’s literature are described. Thesechallenges include selecting and processing books fromdifferent countries, handling and presenting multiplelanguages simultaneously, and addressing cultural differences. Unlike other digital libraries that present content from one or a few languages and cultures, and focuson either adult or child audiences, ICDL must serve amultilingual, multicultural, multigenerational audience.The research is presented as a case study for addressingthese design criteria; current solutions and plans forfuture work are described.

Radical university-industry innovation – research design and preliminary findings from an on-going qualitative case study

DEFF Research Database (Denmark)

Gertsen, Frank; Nielsen, René Nesgaard

and it is arguing that there is a lack of in-depth understanding of such collaborative radical innovation processes. The paper then suggests an abductive research design for an explorative in-depth case study of collaborative radical innovation involving a university and an established Danish manufacturing firm....... Some preliminary findings are presented and briefly discussed, including the role of the university’s formal set-up to deal with IPR/commercialisation and the researchers’ personal networking with industry as well as challenges concerning the sharing of IPR/commercialisation outcomes....

Designing and Maintaining a Communication Consulting Relationship: A Fire Officer Case Study

Science.gov (United States)

Cragan, John F.

2008-01-01

This case study describes a 35-year communication consulting relationship with the Illinois Fire Chiefs' Association. This case explains the fire chiefs' educational problems, the five-step method for creating an educational curriculum for fire officers, and the five-step procedure for continuous evaluation of the curriculum. Finally, an…

Case Designs for Ill-Structured Problems: Analysis and Implications for Practice

Science.gov (United States)

Dabbagh, Nada; Blijd, Cecily Williams

2009-01-01

This study is a third in a series of studies that examined students' information seeking and problem solving behaviors while interacting with one of two types of web-based representations of an ill-structured instructional design case: hierarchical (tree-like) and heterarchical (network-like). A Java program was used to track students' hypermedia…

Risk of Infective Endocarditis After Invasive Dental Treatments: A Case-Only Study.

Science.gov (United States)

Chen, Tzu-Ting; Yeh, Yi-Chun; Chien, Kuo-Liong; Lai, Mei-Shu; Tu, Yu-Kang

2018-04-19

Background -Invasive dental treatments (IDTs) can yield temporary bacteremia and has therefore been considered a potential risk factor of infective endocarditis (IE). It is hypothesized that, through the trauma caused by IDTs, bacteria gain entry to the bloodstream and may attach to abnormal heart valves or damaged heart tissue, giving rise to IE. However, the association between IDTs and IE remains controversial. The aim of this study is to estimate the association between IDTs and IE. Methods -The data in this study were obtained from the Health Insurance Database in Taiwan. We selected two case-only study designs, case-crossover and self-controlled case series, to analyze the data. The advantage of these methods is that confounding factors which do not vary with time are adjusted for implicitly. In the case-crossover design, conditional logistic regression model with exposure to IDTs was used to estimate the risks of IE following an IDT with 4, 8, 12, and 16 weeks delay, respectively. In the self-controlled case series design, conditional Poisson regression model was used to estimate the risk of IE for the risk periods of 1-4, 5-8, 9-12, and 13-16 weeks following an IDT. Results -In total, 9120 and 8181 IE patients were included in case-crossover design and self-controlled case series design, respectively. In case-crossover design, 277 cases and 249 controls received IDTs during the exposure period, and the odds ratio was 1.12 (95% Confidence Interval (CI): 0.94-1.34) for 4 weeks. In self-controlled case series design, we observed that 407 IE occurred during the first four weeks after IDTs, and the age-adjusted incidence rate ratio was 1.14 (95% CI: 1.02-1.26) for 1-4 weeks after IDTs. Conclusions -In both study designs, we did not observe a clinically larger risk for IE in the short periods after IDTs. We also found no association between IDTs and IE among high-risk patients. Therefore, antibiotic prophylaxis for prevention of IE is not required for the

A Case Study in Design Thinking Applied Through Aviation Mission Support Tactical Advancements for the Next Generation (TANG)

Science.gov (United States)

2017-12-01

world, there is some ambiguity when discussing the design of a product , and ambiguity driven by market competition focus on a product’s meanings...constrained interpretation of design . One such case is the Artemide manufacturing company based out of Milan, highly awarded and regarded within the...project was a new design strategy radically divergent from convention, differentiating the product from competing groups while developing new

Case Studies in the Field of Marketing Education: Learner Impact, Case Performance, and Cost Efficiency

Science.gov (United States)

Spais, George S.

2005-01-01

The major objective of this study is to identify a methodology that will help educators in marketing to efficiently manage the design, impact, and cost of case studies. It is my intention is to examine the impact of case study characteristics in relation to the degree of learner involvement in the learning process. The author proposes that…

Exploring Young Children's Understanding about the Concept of Volume through Engineering Design in a STEM Activity: A Case Study

Science.gov (United States)

Park, Do-Yong; Park, Mi-Hwa; Bates, Alan B.

2018-01-01

This case study explores young children's understanding and application of the concept of volume through the practices of engineering design in a STEM activity. STEM stands for science, technology, engineering, and mathematics. However, engineering stands out as a challenging area to implement. In addition, most early engineering education…

Designing a Care Pathway Model - A Case Study of the Outpatient Total Hip Arthroplasty Care Pathway.

Science.gov (United States)

Oosterholt, Robin I; Simonse, Lianne Wl; Boess, Stella U; Vehmeijer, Stephan Bw

2017-03-09

Although the clinical attributes of total hip arthroplasty (THA) care pathways have been thoroughly researched, a detailed understanding of the equally important organisational attributes is still lacking. The aim of this article is to contribute with a model of the outpatient THA care pathway that depicts how the care team should be organised to enable patient discharge on the day of surgery. The outpatient THA care pathway enables patients to be discharged on the day of surgery, shortening the length of stay and intensifying the provision and organisation of care. We utilise visual care modelling to construct a visual design of the organisation of the care pathway. An embedded case study was conducted of the outpatient THA care pathway at a teaching hospital in the Netherlands. The data were collected using a visual care modelling toolkit in 16 semi-structured interviews. Problems and inefficiencies in the care pathway were identified and addressed in the iterative design process. The results are two visual models of the most critical phases of the outpatient THA care pathway: diagnosis & preparation (1) and mobilisation & discharge (4). The results show the care team composition, critical value exchanges, and sequence that enable patient discharge on the day of surgery. The design addressed existing problems and is an optimisation of the case hospital's pathway. The network of actors consists of the patient (1), radiologist (1), anaesthetist (1), nurse specialist (1), pharmacist (1), orthopaedic surgeon (1,4), physiotherapist (1,4), nurse (4), doctor (4) and patient application (1,4). The critical value exchanges include patient preparation (mental and practical), patient education, aligned care team, efficient sequence of value exchanges, early patient mobilisation, flexible availability of the physiotherapist, functional discharge criteria, joint decision making and availability of the care team.

Design of a Nanosatellite Ground Monitoring and Control Software – a Case Study

Directory of Open Access Journals (Sweden)

Freddy Alexander Díaz González

2016-04-01

Full Text Available The growing countries that have carried out the development of CubeSat missions for academic purposes do not offer aerospace engineering programs at their universities. This causes difficulties for traditional engineers upon the formal use of different standards and frameworks for aerospace development, such as the European Cooperation for Space Standardization and Space Mission Analysis and Design . One way in which traditional software engineers can easily understand the structure of an aerospace framework, in order to apply it on the development of CubeSat mission software parts, is comparing its most important elements in relation to the elements suggested by a more familiar method. In this paper, we present a hybrid framework between the ECSS-E-ST-40C standard and the Rational Unified Process, which can be used by traditional software engineers as a guide model for the development of software elements in academic nanosatellite missions. The model integrates the processes and documentation suggested by the ECSS-E-ST-40C with the disciplines, workflows and artifacts suggested in Rational Unified Process. This simplifies the structure of ECSS-E-ST-40C and allows traditional software engineers to easily understand its work elements. The paper describes as study case the implementation of the hybrid model in the analysis and design of ground monitoring and control software for the Libertad-2 satellite mission, which is currently being developed by the Universidad Sergio Arboleda in Colombia.

The Use of Computer Tools in the Design Process of Students’ Architectural Projects. Case Studies in Algeria

Science.gov (United States)

Saighi, Ouafa; Salah Zerouala, Mohamed

2017-12-01

This The paper particularly deals with the way in which computer tools are used by students in their design studio’s projects. Four institutions of architecture education in Algeria are considered as a case study to evaluate the impact of such tools on student design process. This aims to inspect in depth such use, to sort out its advantages and shortcomings in order to suggest some solutions. A field survey was undertaken on a sample of students and their teachers at the same institutions. The analysed results mainly show that computer tools are highly focusing on improving the quality of drawings representation and images seeking observers’ satisfaction hence influencing their decision. Some teachers are not very keen to overuse the computer during the design phase; they prefer the “traditional” approach. This is the present situation that Algerian university is facing which leads to conflict and disagreement between students and teachers. Meanwhile, there was no doubt that computer tools have effectively contributed to improve the competitive level among students.

Deployment of pollution prevention during design -- a case study

International Nuclear Information System (INIS)

Del Mar, R.A.; Ambalam, T.T.

1997-08-01

Traditionally, pollution prevention (P2) assessments have been performed on existing facilities and ongoing operations, well after the completion of design and construction. It has been theorized that more success can be achieved by moving P2 upstream into the design process, where an estimated 70% of a project's total life cycle costs are initially fixed. Decisions made during design to prevent or minimize the amount of waste generated can reap benefits for many years to come. This is especially true when designing systems for handling hazardous and radioactive wastes for treatment, storage, and disposal. P2 assessments performed during design of such projects can uncover significant savings to be reaped during project construction, operations, and/or decommissioning. However, many project managers are still reluctant to include some type of P2 review or assessment as part of the design effort, because the immediate payback to the design entity is difficult to quantify. This paper presents the results of a P2 assessment performed on a design project at Hanford which identified close to $500,000 in construction savings while minimizing low-level and mixed radioactive waste generation. This paper describes the process used to per-form the assessment, discusses its results, and provides lessons-learned for future P2 design assessments

KYPO Cyber Range: Design and Use Cases

OpenAIRE

Vykopal Jan; Ošlejšek Radek; Čeleda Pavel; Vizváry Martin; Tovarňák Daniel

2017-01-01

The physical and cyber worlds are increasingly intertwined and exposed to cyber attacks. The KYPO cyber range provides complex cyber systems and networks in a virtualized, fully controlled and monitored environment. Time-efficient and cost-effective deployment is feasible using cloud resources instead of a dedicated hardware infrastructure. This paper describes the design decisions made during it’s development. We prepared a set of use cases to evaluate the proposed design decisions and to de...

Team effectiveness in academic medical libraries: a multiple case study.

Science.gov (United States)

Martin, Elaine Russo

2006-07-01

The objective of this study is to apply J. Richard Hackman's framework on team effectiveness to academic medical library settings. The study uses a qualitative, multiple case study design, employing interviews and focus groups to examine team effectiveness in three academic medical libraries. Another site was selected as a pilot to validate the research design, field procedures, and methods to be used with the cases. In all, three interviews and twelve focus groups, with approximately seventy-five participants, were conducted at the case study libraries. Hackman identified five conditions leading to team effectiveness and three outcomes dimensions that defined effectiveness. The participants in this study identified additional characteristics of effectiveness that focused on enhanced communication, leadership personality and behavior, and relationship building. The study also revealed an additional outcome dimension related to the evolution of teams. Introducing teams into an organization is not a trivial matter. Hackman's model of effectiveness has implications for designing successful library teams.

Team effectiveness in academic medical libraries: a multiple case study*

Science.gov (United States)

Russo Martin, Elaine

2006-01-01

Objectives: The objective of this study is to apply J. Richard Hackman's framework on team effectiveness to academic medical library settings. Methods: The study uses a qualitative, multiple case study design, employing interviews and focus groups to examine team effectiveness in three academic medical libraries. Another site was selected as a pilot to validate the research design, field procedures, and methods to be used with the cases. In all, three interviews and twelve focus groups, with approximately seventy-five participants, were conducted at the case study libraries. Findings: Hackman identified five conditions leading to team effectiveness and three outcomes dimensions that defined effectiveness. The participants in this study identified additional characteristics of effectiveness that focused on enhanced communication, leadership personality and behavior, and relationship building. The study also revealed an additional outcome dimension related to the evolution of teams. Conclusions: Introducing teams into an organization is not a trivial matter. Hackman's model of effectiveness has implications for designing successful library teams. PMID:16888659

Overview of energy-conserving development planning and design techniques based on five case studies

Energy Technology Data Exchange (ETDEWEB)

1980-06-01

Findings and recommendations are presented of a review of five case studies of ways to conserve energy through development planning and site design in communities. Two approaches were used. In the first approach, a conventional, pre-existing plan was analyzed to determine potential energy use. Once energy-conservation options were identified and evaluated, the conventional plan was modified by employing those options. This approach was used in The Woodlands, Burke Center, and Radisson studies. In the second approach, energy-conservation options are independently identified and evaluated. Those options that passed specific criteria screening were then utilized in developing one or more totally new plans based on energy objectives. This approach was used in Greenbrier and Shenandoah. Radisson is a new town on the outskirts of Syracuse, New York. Greenbrier is a 3000 acre planned community adjacent to Norfolk and Virginia Beach. Shenandoah is a proposed new town in the Atlanta urbanized area. The Woodlands is a new community under development north of Houston. Burke Center is a residential planned unit development in Fairfax County, Virgnia. (MCW)

A Review of Case-Based Learning Practices in an Online MBA Program: A Program-Level Case Study

Science.gov (United States)

Lee, Seung-hee; Lee, Jieun; Liu, Xiaojing; Bonk, Curt J.; Magjuka, Richard J.

2009-01-01

This study examines how a case-based learning approach was used and facilitated in online business education. Perceptions of students and instructors regarding the practices of case-based learning in online environments are explored in terms of instructional design, facilitation, and technology support. This study finds case-based learning to be a…

Patterns of change in design metaphor: A case study

Energy Technology Data Exchange (ETDEWEB)

Stubblefield, W.A.

1998-04-01

Design metaphors play an important role in the development of many software projects. However, the influence of metaphors on project functionality, design methodology and the interactions among members of the development team is not well understood. This paper seeks insights into these issues by examining the experiences of a design team in building a system under the influence of a particularly strong design metaphor.

Case Study Research: Foundations and Methodological Orientations

Directory of Open Access Journals (Sweden)

Helena Harrison

2017-01-01

Full Text Available Over the last forty years, case study research has undergone substantial methodological development. This evolution has resulted in a pragmatic, flexible research approach, capable of providing comprehensive in-depth understanding of a diverse range of issues across a number of disciplines. Change and progress have stemmed from parallel influences of historical transformations in approaches to research and individual researcher's preferences, perspectives, and interpretations of this design. Researchers who have contributed to the development of case study research come from diverse disciplines with different philosophical perspectives, resulting in a variety of definitions and approaches. For the researcher new to using case study, such variety can create a confusing platform for its application. In this article, we explore the evolution of case study research, discuss methodological variations, and summarize key elements with the aim of providing guidance on the available options for researchers wanting to use case study in their work. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs1701195

Preliminary Field Tests and Long-Term Monitoring as a Method of Design Risk Mitigation: A Case Study of Gdańsk Deepwater Container Terminal

Directory of Open Access Journals (Sweden)

Miśkiewicz Mikołaj

2017-09-01

Full Text Available Appropriate risk assessment plays a fundamental role in the design. . The authors propose a possible method of design risk mitigation, which follows recommendations included in Eurocode 7. The so-called “Observational Method” (OM can produce savings in costs and programmes on engineering projects without compromising safety. The case study presented is a complex design solution that deals with the heavy foundations of a gantry crane beam as one of the elements of a Deepwater Container Terminal extension. The paper presents a detailed process of the design of the rear crane beam being a part of the brand new berth, together with its static analysis, as well as the long-term results of observations, which have revealed the real performance of the marine structure. The case presented is based on excessive preliminary field tests and technical monitoring of the structure, and is an example of a successful OM implementation and design risk mitigation.

Reliability improvement through alternative designs-A case study

International Nuclear Information System (INIS)

Kumar, Saurabh; Chattopadhyay, Gopi; Kumar, Uday

2007-01-01

In today's competitive world, reliability of equipment is extremely important to maintain quality and delivery deadlines. This is achieved by using proper maintenance and design changes for unreliable subsystems and components of a complex system. It is significant to develop a strategy for maintenance, replacement and design changes related to those subsystems and components. An analysis of down time along with causes is essential to identify the unreliable components and subsystems. This paper presents an analysis of failure data of solenoid coils of automatic internal grinding machine used in a bearing manufacturing plant. It analyses various replacement and change of design options such as introduction of pneumatic system in place of electromagnetic solenoids for improvement of reliability of the plunger movement mechanism

Medical Big Data Warehouse: Architecture and System Design, a Case Study: Improving Healthcare Resources Distribution.

Science.gov (United States)

Sebaa, Abderrazak; Chikh, Fatima; Nouicer, Amina; Tari, AbdelKamel

2018-02-19

The huge increases in medical devices and clinical applications which generate enormous data have raised a big issue in managing, processing, and mining this massive amount of data. Indeed, traditional data warehousing frameworks can not be effective when managing the volume, variety, and velocity of current medical applications. As a result, several data warehouses face many issues over medical data and many challenges need to be addressed. New solutions have emerged and Hadoop is one of the best examples, it can be used to process these streams of medical data. However, without an efficient system design and architecture, these performances will not be significant and valuable for medical managers. In this paper, we provide a short review of the literature about research issues of traditional data warehouses and we present some important Hadoop-based data warehouses. In addition, a Hadoop-based architecture and a conceptual data model for designing medical Big Data warehouse are given. In our case study, we provide implementation detail of big data warehouse based on the proposed architecture and data model in the Apache Hadoop platform to ensure an optimal allocation of health resources.

On strength design using free material subjected to multiple load cases

DEFF Research Database (Denmark)

Pedersen, Pauli; Pedersen, Niels Leergaard

2013-01-01

Multiple load cases and the consideration of strength is a reality that most structural designs are exposed to. Improved possibility to produce specific materials, say by fiber lay-up, put focus on research on free material optimization. A formulation for such design problems together with a prac......Multiple load cases and the consideration of strength is a reality that most structural designs are exposed to. Improved possibility to produce specific materials, say by fiber lay-up, put focus on research on free material optimization. A formulation for such design problems together...... with a practical recursive design procedure is presented and illustrated with examples. The presented finite element analysis involve many elements as well as many load cases. Separating the local amount of material from a description with unit trace for the local anisotropy, gives the free materials formulation...

Children as Educational Computer Game Designers: An Exploratory Study

Science.gov (United States)

Baytak, Ahmet; Land, Susan M.; Smith, Brian K.

2011-01-01

This study investigated how children designed computer games as artifacts that reflected their understanding of nutrition. Ten 5th grade students were asked to design computer games with the software "Game Maker" for the purpose of teaching 1st graders about nutrition. The results from the case study show that students were able to…

User-centered design in brain-computer interfaces-a case study.

Science.gov (United States)

Schreuder, Martijn; Riccio, Angela; Risetti, Monica; Dähne, Sven; Ramsay, Andrew; Williamson, John; Mattia, Donatella; Tangermann, Michael

2013-10-01

The array of available brain-computer interface (BCI) paradigms has continued to grow, and so has the corresponding set of machine learning methods which are at the core of BCI systems. The latter have evolved to provide more robust data analysis solutions, and as a consequence the proportion of healthy BCI users who can use a BCI successfully is growing. With this development the chances have increased that the needs and abilities of specific patients, the end-users, can be covered by an existing BCI approach. However, most end-users who have experienced the use of a BCI system at all have encountered a single paradigm only. This paradigm is typically the one that is being tested in the study that the end-user happens to be enrolled in, along with other end-users. Though this corresponds to the preferred study arrangement for basic research, it does not ensure that the end-user experiences a working BCI. In this study, a different approach was taken; that of a user-centered design. It is the prevailing process in traditional assistive technology. Given an individual user with a particular clinical profile, several available BCI approaches are tested and - if necessary - adapted to him/her until a suitable BCI system is found. Described is the case of a 48-year-old woman who suffered from an ischemic brain stem stroke, leading to a severe motor- and communication deficit. She was enrolled in studies with two different BCI systems before a suitable system was found. The first was an auditory event-related potential (ERP) paradigm and the second a visual ERP paradigm, both of which are established in literature. The auditory paradigm did not work successfully, despite favorable preconditions. The visual paradigm worked flawlessly, as found over several sessions. This discrepancy in performance can possibly be explained by the user's clinical deficit in several key neuropsychological indicators, such as attention and working memory. While the auditory paradigm relies

Effectiveness of inactivated quadrivalent influenza vaccine in the 2015/2016 season as assessed in both a test-negative case-control study design and a traditional case-control study design.

Science.gov (United States)

Kimiya, Takahisa; Shinjoh, Masayoshi; Anzo, Makoto; Takahashi, Hiroki; Sekiguchi, Shinichiro; Sugaya, Norio; Takahashi, Takao

2018-04-21

Both traditional case-control studies (TCCSs) and test-negative case-control studies (TNCCSs) are commonly used to assess influenza vaccine effectiveness (VE). To compensate for the fact that observational studies are susceptible to bias, we combined both methods to assess VE in one geographical area during the 2015/2016 season, when influenza A (H1N1)pdm was dominant. Our TNCCS covered 331 children aged 6 months to 15 years who visited our hospital with fever, including 182 with influenza, and our TCCS covered 812 pediatric outpatients aged 6 months to 15 years, including 214 with influenza. Influenza infection and vaccination history were reviewed, and VE was calculated as (1 - odds ratio) × 100. In the TNCCS, VE against influenza A was 68% (95% CI 47-81) overall, and 70% (48-83) for those given two doses; against influenza B, VE was 37% (- 12-64) overall and 49% (2-74) for two doses. In the TCCS, VE against influenza A was 44% (15-63) overall and 44% (13-64) for two doses, and VE against influenza B was 24% (- 19-52) overall and 41% (3-64) for two doses. Both studies confirmed significant VE against influenza A, significant two-dose VE against influenza B, and better two-dose VE than one-dose VE. What is Known: • Influenza vaccine effectiveness (VE) varies from year to year. • Observational studies are conventionally used for VE assessment. However, they are inherently susceptible to bias and confounding. What is New: • This is the first report of influenza VE assessment using more than one observational study and performed in a specific area during the same season. • VE estimates obtained in our traditional case-control study were lower than those in our test-negative case-control study, but both studies found significant VE against influenza.

DHM simulation in virtual environments: a case-study on control room design.

Science.gov (United States)

Zamberlan, M; Santos, V; Streit, P; Oliveira, J; Cury, R; Negri, T; Pastura, F; Guimarães, C; Cid, G

2012-01-01

This paper will present the workflow developed for the application of serious games in the design of complex cooperative work settings. The project was based on ergonomic studies and development of a control room among participative design process. Our main concerns were the 3D human virtual representation acquired from 3D scanning, human interaction, workspace layout and equipment designed considering ergonomics standards. Using Unity3D platform to design the virtual environment, the virtual human model can be controlled by users on dynamic scenario in order to evaluate the new work settings and simulate work activities. The results obtained showed that this virtual technology can drastically change the design process by improving the level of interaction between final users and, managers and human factors team.

Design of emergency plans due to the failure risk of hydraulic works - Theory and case study

International Nuclear Information System (INIS)

Ochoa Rivera, Juan Camilo

2006-01-01

Dams are built to be highly safe hydraulic works. Nevertheless, they are not exempt from a certain failure risk, which turns in a variable value along the time service of the dam. As the mentioned dam-failure risk can be a significant hazard, analysis on dam-break is becoming important, as same as the assessment of its consequences. This type of studies are intended to reduce the costs linked to dam-failure, which are mainly due to the losses of human beings and material goods. A suitable way to minimize such losses consists of designing emergency plans, which permit to prepare and implant appropriate protection measures. A methodological framework to carry out this kind of emergency plans is introduced in this paper, accompanied by a case study corresponding to an emergency plan of a Spanish dam

Influenza vaccine effectiveness estimates in the Dutch population from 2003 to 2014: the test-negative design case-control study with different control groups.

NARCIS (Netherlands)

Doorn, E. van; Darvishian, M.; Dijkstra, F.; Donker, G.A.; Overduin, P.; Meijer, A.; Hak, E.

2017-01-01

Information about influenza vaccine effectiveness (IVE) is important for vaccine strain selection and immunization policy decisions. The test-negative design (TND) case-control study is commonly used to obtain IVE estimates. However, the definition of the control patients may influence IVE

Influenza vaccine effectiveness estimates in the Dutch population from 2003 to 2014 : The test-negative design case-control study with different control groups

NARCIS (Netherlands)

van Doorn, Eva; Darvishian, Maryam; Dijkstra, Frederika; Donker, Gé A; Overduin, Pieter; Meijer, Adam; Hak, Eelko

2017-01-01

Information about influenza vaccine effectiveness (IVE) is important for vaccine strain selection and immunization policy decisions. The test-negative design (TND) case-control study is commonly used to obtain IVE estimates. However, the definition of the control patients may influence IVE

Influenza vaccine effectiveness estimates in the Dutch population from 2003 to 2014: The test-negative design case-control study with different control groups.

NARCIS (Netherlands)

van Doorn, Eva; Darvishian, Maryam; Dijkstra, Frederika; Donker, Gé A; Overduin, Pieter; Meijer, Adam; Hak, Eelko

2017-01-01

Information about influenza vaccine effectiveness (IVE) is important for vaccine strain selection and immunization policy decisions. The test-negative design (TND) case-control study is commonly used to obtain IVE estimates. However, the definition of the control patients may influence IVE

A Competence-Based Approach to the Design of a Teaching Sequence about Oral and Dental Health and Hygiene: A Case Study

Science.gov (United States)

Blanco-López, Ángel; Franco-Mariscal, Antonio Joaquín; España-Ramos, Enrique

2016-01-01

We present a case study to illustrate the design and implementation of a teaching sequence about oral and dental health and hygiene. This teaching sequence was aimed at year 10 students (age 15-16) and sought to develop their scientific competences. In line with the PISA assessment framework for science and the tenets of a context-based approach…

Audio Key Finding: Considerations in System Design and Case Studies on Chopin's 24 Preludes

Directory of Open Access Journals (Sweden)

Elaine Chew

2007-01-01

Full Text Available We systematically analyze audio key finding to determine factors important to system design, and the selection and evaluation of solutions. First, we present a basic system, fuzzy analysis spiral array center of effect generator algorithm, with three key determination policies: nearest-neighbor (NN, relative distance (RD, and average distance (AD. AD achieved a 79% accuracy rate in an evaluation on 410 classical pieces, more than 8% higher RD and NN. We show why audio key finding sometimes outperforms symbolic key finding. We next propose three extensions to the basic key finding system—the modified spiral array (mSA, fundamental frequency identification (F0, and post-weight balancing (PWB—to improve performance, with evaluations using Chopin's Preludes (Romantic repertoire was the most challenging. F0 provided the greatest improvement in the first 8 seconds, while mSA gave the best performance after 8 seconds. Case studies examine when all systems were correct, or all incorrect.

QuantifyMe: An Open-Source Automated Single-Case Experimental Design Platform †

Science.gov (United States)

Sano, Akane; Ferguson, Craig; Mohan, Akshay; Picard, Rosalind W.

2018-01-01

Smartphones and wearable sensors have enabled unprecedented data collection, with many products now providing feedback to users about recommended step counts or sleep durations. However, these recommendations do not provide personalized insights that have been shown to be best suited for a specific individual. A scientific way to find individualized recommendations and causal links is to conduct experiments using single-case experimental design; however, properly designed single-case experiments are not easy to conduct on oneself. We designed, developed, and evaluated a novel platform, QuantifyMe, for novice self-experimenters to conduct proper-methodology single-case self-experiments in an automated and scientific manner using their smartphones. We provide software for the platform that we used (available for free on GitHub), which provides the methodological elements to run many kinds of customized studies. In this work, we evaluate its use with four different kinds of personalized investigations, examining how variables such as sleep duration and regularity, activity, and leisure time affect personal happiness, stress, productivity, and sleep efficiency. We conducted a six-week pilot study (N = 13) to evaluate QuantifyMe. We describe the lessons learned developing the platform and recommendations for its improvement, as well as its potential for enabling personalized insights to be scientifically evaluated in many individuals, reducing the high administrative cost for advancing human health and wellbeing. PMID:29621133

Report - Production of Gasoline and Diesel from Biomass via Fast Pyrolysis, Hydrotreating and Hydrocracking: A Design Case

Energy Technology Data Exchange (ETDEWEB)

Jones, S. B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Valkenburg, C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Walton, C. W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Elliott, D. C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Holladay, J. E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Stevens, D. J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kinchin, C. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Czernik, S. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2009-02-01

The purpose of this design case study is to evaluate a processing pathway for converting biomass into infrastructure-compatible hydrocarbon biofuels. This design case investigates production of fast pyrolysis oil from biomass and the upgrading of that bio-oil as a means for generating infrastructure-ready renewable gasoline and diesel fuels.

How and Why of User Studies: RLG's RedLightGreen as a Case Study

Science.gov (United States)

Proffitt, Merrilee

2006-01-01

This article documents a lifecycle approach to employing user-centered design, covering both qualitative and quantitative data gathering methods in support of using this approach for product design, usability testing, and market research. The author provides specific case studies of usability studies, focus groups, interviews, ethnographic…

[Application of nested case-control study on safe evaluation of post-marketing traditional Chinese medicine injection].

Science.gov (United States)

Xiao, Ying; Zhao, Yubin; Xie, Yanming

2011-10-01

The nested case-control study design (or the case-control in a cohort study) is described here as a new study design used in safe evaluation of post-marketing traditional Chinese medicine injection. In the nested case-control study, cases of a disease that occur in a defined cohort are identified and, for each, a specified number of matched controls is selected from among those in the cohort who have not developed the disease by the time of disease occurrence in the case. For many research questions, the nested case-control design potentially offers impressive reductions in costs and efforts of data collection and analysis compared with the full cohort approach, with relatively minor loss in statistical efficiency. The nested case-control design is particularly advantageous for studies in safe evaluation of post-marketing traditional Chinese medicine injection. Some examples of the application of nested case-control study were given.

Facilitating Case Studies in Massage Therapy Clinical Education

Science.gov (United States)

Baskwill, Amanda

2013-01-01

The integration of evidence into reflective health care practice has been on the rise in recent years and is a phenomenon that has affected all health care professions, including massage therapy. Clinical case studies are a research design that follows one patient or subject, making the studies ideal for use in clinical practice. They are valuable for communicating information from clinical practice to the broader community. Case studies have face validity that may be more valuable to individual practitioners than homogeneous randomized controlled trials, as the practitioner may recognize a complex patient in the case report. At Humber College, Student Massage Therapists (SMTs) create, conduct, and communicate results of a clinical case study prior to graduation. This article describes the process and experience. PMID:23730397

A case study on robust optimal experimental design for model calibration of ω-Transaminase

DEFF Research Database (Denmark)

Daele, Timothy, Van; Van Hauwermeiren, Daan; Ringborg, Rolf Hoffmeyer

the experimental space. However, it is expected that more informative experiments can be designed to increase the confidence of the parameter estimates. Therefore, we apply Optimal Experimental Design (OED) to the calibrated model of Shin and Kim (1998). The total number of samples was retained to allow fair......” parameter values are not known before finishing the model calibration. However, it is important that the chosen parameter values are close to the real parameter values, otherwise the OED can possibly yield non-informative experiments. To counter this problem, one can use robust OED. The idea of robust OED......Proper calibration of models describing enzyme kinetics can be quite challenging. This is especially the case for more complex models like transaminase models (Shin and Kim, 1998). The latter fitted model parameters, but the confidence on the parameter estimation was not derived. Hence...

Projecting the Future for Design Science Research: An Action‐Case Based Analysis

DEFF Research Database (Denmark)

Baskerville, Richard; Pries-Heje, Jan

2015-01-01

and theories appears to be a key challenge. In this paper we commence with a DESRIST paper from 2012 that instantiated design principles in an artifact for a bank. That paper included plans and techniques for future use of its principles (propagation), including prescriptions for a five-phase adoption process...... or theories have stimulated many actual projections. We demonstrate these concepts in a case study of propagation: a chemical manufacturer and service provider that adopted the design principles arising from that 2012 DESRIST banking-based design science research. We conclude that generalizability is too well...

Designing, Prototyping and Evaluating Digital Mindfulness Applications: A Case Study of Mindful Breathing for Stress Reduction.

Science.gov (United States)

Zhu, Bin; Hedman, Anders; Feng, Shuo; Li, Haibo; Osika, Walter

2017-06-14

During the past decade, there has been a rapid increase of interactive apps designed for health and well-being. Yet, little research has been published on developing frameworks for design and evaluation of digital mindfulness facilitating technologies. Moreover, many existing digital mindfulness applications are purely software based. There is room for further exploration and assessment of designs that make more use of physical qualities of artifacts. The study aimed to develop and test a new physical digital mindfulness prototype designed for stress reduction. In this case study, we designed, developed, and evaluated HU, a physical digital mindfulness prototype designed for stress reduction. In the first phase, we used vapor and light to support mindful breathing and invited 25 participants through snowball sampling to test HU. In the second phase, we added sonification. We deployed a package of probes such as photos, diaries, and cards to collect data from users who explored HU in their homes. Thereafter, we evaluated our installation using both self-assessed stress levels and heart rate (HR) and heart rate variability (HRV) measures in a pilot study, in order to measure stress resilience effects. After the experiment, we performed a semistructured interview to reflect on HU and investigate the design of digital mindfulness apps for stress reduction. The results of the first phase showed that 22 of 25 participants (88%) claimed vapor and light could be effective ways of promoting mindful breathing. Vapor could potentially support mindful breathing better than light (especially for mindfulness beginners). In addition, a majority of the participants mentioned sound as an alternative medium. In the second phase, we found that participants thought that HU could work well for stress reduction. We compared the effect of silent HU (using light and vapor without sound) and sonified HU on 5 participants. Subjective stress levels were statistically improved with both

May Stakeholders be Involved in Design Without Informed Consent? The Case of Hidden Design.

Science.gov (United States)

Pols, A J K

2017-06-01

Stakeholder involvement in design is desirable from both a practical and an ethical point of view. It is difficult to do well, however, and some problems recur again and again, both of a practical nature, e.g. stakeholders acting strategically rather than openly, and of an ethical nature, e.g. power imbalances unduly affecting the outcome of the process. Hidden Design has been proposed as a method to deal with the practical problems of stakeholder involvement. It aims to do so by taking the observation of stakeholder actions, rather than the outcomes of a deliberative process, as its input. Furthermore, it hides from stakeholders the fact that a design process is taking place so that they will not behave differently than they otherwise would. Both aspects of Hidden Design have raised ethical worries. In this paper I make an ethical analysis of what it means for a design process to leave participants uninformed or deceived rather than acquiring their informed consent beforehand, and to use observation of actions rather than deliberation as input for design, using Hidden Design as a case study. This analysis is based on two sets of normative guidelines: the ethical guidelines for psychological research involving deception or uninformed participants from two professional psychological organisations, and Habermasian norms for a fair and just (deliberative) process. It supports the conclusion that stakeholder involvement in design organised in this way can be ethically acceptable, though under a number of conditions and constraints.

Designing a Care Pathway Model – A Case Study of the Outpatient Total Hip Arthroplasty Care Pathway

Directory of Open Access Journals (Sweden)

Robin I. Oosterholt

2017-03-01

Full Text Available Introduction: Although the clinical attributes of total hip arthroplasty (THA care pathways have been thoroughly researched, a detailed understanding of the equally important organisational attributes is still lacking. The aim of this article is to contribute with a model of the outpatient THA care pathway that depicts how the care team should be organised to enable patient discharge on the day of surgery. Theory: The outpatient THA care pathway enables patients to be discharged on the day of surgery, short- ening the length of stay and intensifying the provision and organisation of care. We utilise visual care modelling to construct a visual design of the organisation of the care pathway. Methods: An embedded case study was conducted of the outpatient THA care pathway at a teaching hospital in the Netherlands. The data were collected using a visual care modelling toolkit in 16 semi- structured interviews. Problems and inefficiencies in the care pathway were identified and addressed in the iterative design process. Results: The results are two visual models of the most critical phases of the outpatient THA care pathway: diagnosis & preparation (1 and mobilisation & discharge (4. The results show the care team composition, critical value exchanges, and sequence that enable patient discharge on the day of surgery. Conclusion: The design addressed existing problems and is an optimisation of the case hospital’s pathway. The network of actors consists of the patient (1, radiologist (1, anaesthetist (1, nurse specialist (1, pharmacist (1, orthopaedic surgeon (1,4, physiotherapist (1,4, nurse (4, doctor (4 and patient applica- tion (1,4. The critical value exchanges include patient preparation (mental and practical, patient education, aligned care team, efficient sequence of value exchanges, early patient mobilisation, flexible availability of the physiotherapist, functional discharge criteria, joint decision making and availability of the care team.

A Database Design and Development Case: Home Theater Video

Science.gov (United States)

Ballenger, Robert; Pratt, Renee

2012-01-01

This case consists of a business scenario of a small video rental store, Home Theater Video, which provides background information, a description of the functional business requirements, and sample data. The case provides sufficient information to design and develop a moderately complex database to assist Home Theater Video in solving their…

Supplementing consumer insights at Electrolux by mining social media: An exploratory case study

OpenAIRE

Chaudhary, Amit

2011-01-01

Purpose – The aim of this thesis is to explore the possibility of text mining social media, for consumer insights from an organizational perspective. Design/methodology/approach – An exploratory, single case embedded case study with inductive approach and partially mixed, concurrent, dominant status mixed method research design. The case study contains three different studies to try to triangulate the research findings and support research objective of using social media for consumer insights...

How to Design for Strategic Resilience: A Case Study in Retailing

Directory of Open Access Journals (Sweden)

Liisa Välikangas

2013-08-01

Full Text Available Few firms can be said to be truly resilient by sustaining high performance for a long time. We draw on a case study of a large U.S.-based retailer to explore how an organization develops resilience – the ability to recover quickly from environmental jolts or misfortunes. The company’s CEO, concerned about the company’s ability to maintain its industry leadership and excellent performance, sought to engage the organization in a broad quest for developing resilience capabilities. Our analysis of this case suggests that generative doubt, organizational slack, and mindful engagement throughout the organization are key conditions for resilience. These three conditions need to co-exist to develop and sustain strategic resilience.

A Capstone Wiki Knowledge Base: A Case Study of an Online Tool Designed to Promote Life-Long Learning through Engineering Literature Research

Science.gov (United States)

Clarke, James B.; Coyle, James R.

2011-01-01

This article reports the results of a case study in which an experimental wiki knowledge base was designed, developed, and tested by the Brill Science Library at Miami University for an undergraduate engineering senior capstone project. The wiki knowledge base was created to determine if the science library could enhance the engineering literature…

CASE STUDY CRITIQUE; UPPER CLINCH CASE STUDY

Science.gov (United States)

Case study critique: Upper Clinch case study (from Research on Methods for Integrating Ecological Economics and Ecological Risk Assessment: A Trade-off Weighted Index Approach to Integrating Economics and Ecological Risk Assessment). This critique answers the questions: 1) does ...

Human-Centered Design as an Approach for Place-Based Innovation in Public Health: A Case Study from Oakland, California.

Science.gov (United States)

Vechakul, Jessica; Shrimali, Bina Patel; Sandhu, Jaspal S

2015-12-01

This case study provides a high-level overview of the human-centered design (HCD) or "design thinking" process and its relevance to public health. The Best Babies Zone (BBZ) initiative is a multi-year project aimed at reducing inequities in infant mortality rates. In 2012, BBZ launched pilot programs in three US cities: Cincinnati, Ohio; New Orleans, Louisiana; and Oakland, California. The Alameda County Public Health Department (ACPHD), the lead for the Oakland BBZ site, identified HCD as a promising approach for addressing the social and economic conditions that are important drivers of health inequities. HCD is a process for creating innovative products, services, and strategies that prioritizes the needs of the intended population. ACPHD partnered with the Gobee Group (a social innovation design consultancy) to develop the Design Sprint. The Design Sprint was a 12-week pilot in which 14 professionals from nine organizations used the HCD process to develop concepts for stimulating a vibrant local economy in the Oakland Best Babies Zone. Thirty- to sixty-minute semi-structured interviews were conducted with all 14 individuals involved in the Design Sprint. With the exception of one interview, the interviews were audio-recorded, transcribed, and inductively coded to identify themes. Our experience suggests that HCD can: enhance community engagement; expedite the timeframe for challenge identification, program design, and implementation; and create innovative programs that address complex challenges.

Daylight case study building. A working document of Task 21. Daylight in buildings

Energy Technology Data Exchange (ETDEWEB)

Kristensen, P E

1997-05-01

This report describes 16 buildings, that have been selected as Task 21 case studies. Totally 15 buildings will be monitored and described according to the procedures developed in Task 21. One case study building is in design stage, the new ISE Headquarters in Freiburg, and this project has been selected as a case study on building design. The monitoring programme for the buildings runs through 1997 until mid 1998. The present document serves as a basic document describing the case studies, until the projects will be described in more detail, including monitoring results, towards the end of the Task. (au)

The Design of Case Products’ Shape Form Information Database Based on NURBS Surface

Science.gov (United States)

Liu, Xing; Liu, Guo-zhong; Xu, Nuo-qi; Zhang, Wei-she

2017-07-01

In order to improve the computer design of product shape design,applying the Non-uniform Rational B-splines(NURBS) of curves and surfaces surface to the representation of the product shape helps designers to design the product effectively.On the basis of the typical product image contour extraction and using Pro/Engineer(Pro/E) to extract the geometric feature of scanning mold,in order to structure the information data base system of value point,control point and node vector parameter information,this paper put forward a unified expression method of using NURBS curves and surfaces to describe products’ geometric shape and using matrix laboratory(MATLAB) to simulate when products have the same or similar function.A case study of electric vehicle’s front cover illustrates the access process of geometric shape information of case product in this paper.This method can not only greatly reduce the capacity of information debate,but also improve the effectiveness of computer aided geometric innovation modeling.

Misclassification of Case-Control Studies in Neurosurgery and Proposed Solutions.

Science.gov (United States)

Esene, Ignatius Ngene; Mbuagbaw, Lawrence; Dechambenoit, Gilbert; Reda, Wael; Kalangu, Kazadi K

2018-04-01

Case-control studies (CCS) and cohort studies (CS) are common research designs in neurosurgery. But the term case-control study is frequently misused in the neurosurgical literature, with many articles reported as CCS, even although their methodology does not respect the basic components of a CCS. We sought to estimate the extent of these discrepancies in neurosurgical literature, explore factors contributing to mislabeling, and shed some light on study design reporting. We identified 31 top-ranking pure neurosurgical journals and searched them for articles reported as CCS, either in the title or in the abstract. The articles were read to determine if they really were CCS according to STROBE (Strengthening the Reporting of Observational Studies in Epidemiology) guidelines. Article assessment was conducted in duplicate (agreement [κ statistics] = 99.82%). Two hundred and twenty-four articles met our inclusion criteria, 133 of which (59.38%) correctly labeled the case-control design, whereas 91 (40.62%) misclassified this study design. Cohort studies (CS) were the most common design mislabeled as case-control studies in 76 articles (33.93%), 57 of which (25.45%) were retrospective CS. The mislabeling of CCS impairs the appropriate indexing, classification, and sorting of evidence. Mislabeling CS for CCS leads to a downgrading of evidence as CS represent the highest level of evidence for observational studies. Odds ratios instead of relative risk are reported for these studies, resulting in a distortion of the measurement of the effect size, compounded when these are summarized in systematic reviews and pooled in meta-analyses. Many studies reported as CCS are not true CCS. Reporting guidelines should include items that ensure that studies are labeled correctly. STROBE guidelines should be implemented in assessment of observational studies. Researchers in neurosurgery need better training in research methods and terminology. We also recommend accrued vigilance from

Designing and Developing a Programme-Focused Assessment Strategy: A Case Study

Science.gov (United States)

Brunton, James; Brown, Mark; Costello, Eamon; Walsh, Elaine

2016-01-01

This case study describes the process that the Humanities Programme Team, in Dublin City University's Open Education Unit, has undertaken with regard to developing a systematic, programme-focused assessment strategy. It charts the development of an Assessment Matrix that facilitated the enhancement of programme coherence in the context of a…

Case Studies on Superconducting Magnets for Particle Accelerators

International Nuclear Information System (INIS)

Ferracin, P

2014-01-01

During the CERN Accelerator School 'Superconductivity for accelerators', the students were divided into 18 groups, and 6 different exercises (case studies), involving the design and analysis of superconducting magnets and RF cavities, were assigned. The problems covered a broad spectrum of topics, from properties of superconducting materials to operation conditions and general dimensions of components. The work carried out by the students turned out to be an extremely useful opportunity to review the material explained during the lectures, to become familiar with the orders of magnitude of the key parameters, and to understand and compare different design options. We provide in this paper a summary of the activities related to the case studies on superconducting magnets and present the main outcomes

Case Studies on Superconducting Magnets for Particle Accelerators

Energy Technology Data Exchange (ETDEWEB)

Ferracin, P [European Organization for Nuclear Research, Geneva (Switzerland)

2014-07-01

During the CERN Accelerator School 'Superconductivity for accelerators', the students were divided into 18 groups, and 6 different exercises (case studies), involving the design and analysis of superconducting magnets and RF cavities, were assigned. The problems covered a broad spectrum of topics, from properties of superconducting materials to operation conditions and general dimensions of components. The work carried out by the students turned out to be an extremely useful opportunity to review the material explained during the lectures, to become familiar with the orders of magnitude of the key parameters, and to understand and compare different design options. We provide in this paper a summary of the activities related to the case studies on superconducting magnets and present the main outcomes.

How to design for strategic resilience : a case study in retailing

NARCIS (Netherlands)

Välikangas, L.; Romme, A.G.L.

2013-01-01

Few firms can be said to be truly resilient by sustaining high performance for a long time. We draw on a case study of a large U.S.-based retailer to explore how an organization develops resilience – the ability to recover quickly from environmental jolts or misfortunes. The company’s CEO, concerned

Case studies on design, simulation and visualization of control and measurement applications using REX control system

Energy Technology Data Exchange (ETDEWEB)

Ozana, Stepan, E-mail: stepan.ozana@vsb.cz; Pies, Martin, E-mail: martin.pies@vsb.cz; Docekal, Tomas, E-mail: docekalt@email.cz [VSB-Technical University of Ostrava, Faculty of Electrical Engineering and Computer Science, Department of Cybernetics and Biomedical Engineering, 17. listopadu 15/2172, Ostrava-Poruba, 700 30 (Czech Republic)

2016-06-08

REX Control System is a professional advanced tool for design and implementation of complex control systems that belongs to softPLC category. It covers the entire process starting from simulation of functionality of the application before deployment, through implementation on real-time target, towards analysis, diagnostics and visualization. Basically it consists of two parts: the development tools and the runtime system. It is also compatible with Simulink environment, and the way of implementation of control algorithm is very similar. The control scheme is finally compiled (using RexDraw utility) and uploaded into a chosen real-time target (using RexView utility). There is a wide variety of hardware platforms and real-time operating systems supported by REX Control System such as for example Windows Embedded, Linux, Linux/Xenomai deployed on SBC, IPC, PAC, Raspberry Pi and others with many I/O interfaces. It is modern system designed both for measurement and control applications, offering a lot of additional functions concerning data archiving, visualization based on HTML5, and communication standards. The paper will sum up possibilities of its use in educational process, focused on control of case studies of physical models with classical and advanced control algorithms.

Using customer-focused research and design to build a self-service online store: a case study

Directory of Open Access Journals (Sweden)

Ahmadi MB

2013-02-01

Full Text Available Michael B Ahmadi,1 William Trefzger,2 Rich Morey,1 Ileana Quintas31Substance Abuse and Mental Health Services Administration, Rockville, 2Centers for Medicare and Medicaid Services, Baltimore, 3IQ Solutions, Inc, Rockville, MD, USAAbstract: American government information centers need to be responsive to an increasingly customer driven information environment while ensuring the sustainability of operations. Enhanced self-service options offer one avenue for addressing both of these needs. This article presents a case study of how the US Substance Abuse and Mental Health Services Administration used extensive stakeholder research and a customer-centric design to reframe its service model by building a self-service online store that integrates access to more than 1300 behavioral health publications previously housed in two separate clearinghouses. The redesigned Substance Abuse and Mental Health Services Administration Store offers users a modern e-commerce website that not only helps customers find, order, download, and share products, but also encourages serendipitous content exploration, which has led to increased orders containing both substance abuse and mental health publications.Keywords: customer research, taxonomy, usability testing, web analytics, web design

Case studies on design, simulation and visualization of control and measurement applications using REX control system

International Nuclear Information System (INIS)

Ozana, Stepan; Pies, Martin; Docekal, Tomas

2016-01-01

REX Control System is a professional advanced tool for design and implementation of complex control systems that belongs to softPLC category. It covers the entire process starting from simulation of functionality of the application before deployment, through implementation on real-time target, towards analysis, diagnostics and visualization. Basically it consists of two parts: the development tools and the runtime system. It is also compatible with Simulink environment, and the way of implementation of control algorithm is very similar. The control scheme is finally compiled (using RexDraw utility) and uploaded into a chosen real-time target (using RexView utility). There is a wide variety of hardware platforms and real-time operating systems supported by REX Control System such as for example Windows Embedded, Linux, Linux/Xenomai deployed on SBC, IPC, PAC, Raspberry Pi and others with many I/O interfaces. It is modern system designed both for measurement and control applications, offering a lot of additional functions concerning data archiving, visualization based on HTML5, and communication standards. The paper will sum up possibilities of its use in educational process, focused on control of case studies of physical models with classical and advanced control algorithms.

Case studies on design, simulation and visualization of control and measurement applications using REX control system

Science.gov (United States)

Ozana, Stepan; Pies, Martin; Docekal, Tomas

2016-06-01

REX Control System is a professional advanced tool for design and implementation of complex control systems that belongs to softPLC category. It covers the entire process starting from simulation of functionality of the application before deployment, through implementation on real-time target, towards analysis, diagnostics and visualization. Basically it consists of two parts: the development tools and the runtime system. It is also compatible with Simulink environment, and the way of implementation of control algorithm is very similar. The control scheme is finally compiled (using RexDraw utility) and uploaded into a chosen real-time target (using RexView utility). There is a wide variety of hardware platforms and real-time operating systems supported by REX Control System such as for example Windows Embedded, Linux, Linux/Xenomai deployed on SBC, IPC, PAC, Raspberry Pi and others with many I/O interfaces. It is modern system designed both for measurement and control applications, offering a lot of additional functions concerning data archiving, visualization based on HTML5, and communication standards. The paper will sum up possibilities of its use in educational process, focused on control of case studies of physical models with classical and advanced control algorithms.

Embracing Wicked Problems: The Turn to Design in Composition Studies

Science.gov (United States)

Marback, Richard

2009-01-01

Recent appeal to the concept of design in composition studies benefits teaching writing in digital media. Yet the concept of design has not been developed enough to fully benefit composition instruction. This article develops an understanding of design as a matter of resolving wicked problems and makes a case for the advantages of this…

Single case design studies in music therapy: resurrecting experimental evidence in small group and individual music therapy clinical settings.

Science.gov (United States)

Geist, Kamile; Hitchcock, John H

2014-01-01

The profession would benefit from greater and routine generation of causal evidence pertaining to the impact of music therapy interventions on client outcomes. One way to meet this goal is to revisit the use of Single Case Designs (SCDs) in clinical practice and research endeavors in music therapy. Given the appropriate setting and goals, this design can be accomplished with small sample sizes and it is often appropriate for studying music therapy interventions. In this article, we promote and discuss implementation of SCD studies in music therapy settings, review the meaning of internal study validity and by extension the notion of causality, and describe two of the most commonly used SCDs to demonstrate how they can help generate causal evidence to inform the field. In closing, we describe the need for replication and future meta-analysis of SCD studies completed in music therapy settings. SCD studies are both feasible and appropriate for use in music therapy clinical practice settings, particularly for testing effectiveness of interventions for individuals or small groups. © the American Music Therapy Association 2014. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Design for manufacturability of macro and micro products: a case study of heat exchanger design

DEFF Research Database (Denmark)

Omidvarnia, F.; Weng Feng, L.; Hansen, H. N.

2018-01-01

In this paper, a novel methodology in designing a micro heat exchanger is proposed by modifying a conventional design methodology for macro products with the considerations of differences between design of a micro and a macro product. The methodology starts with the identification of differences...... for fabricating micro heat exchangers are ranked based on the defined criteria. Following the design methodology, primary design ideas for micro heat exchangers are generated according to the heat transfer principles for macro heat exchangers. Taking micro design considerations into account, the designs from next...... iteration are created. Finally, the performances of the designs for micro heat exchangers are compared with their macro counterparts. The most appropriate designs for micro heat exchangers are finalized. The micro specific design guidelines obtained by the designer through evaluating the modeling results...

Large-Scale Demand Driven Design of a Customized Bus Network: A Methodological Framework and Beijing Case Study

Directory of Open Access Journals (Sweden)

Jihui Ma

2017-01-01

Full Text Available In recent years, an innovative public transportation (PT mode known as the customized bus (CB has been proposed and implemented in many cities in China to efficiently and effectively shift private car users to PT to alleviate traffic congestion and traffic-related environmental pollution. The route network design activity plays an important role in the CB operation planning process because it serves as the basis for other operation planning activities, for example, timetable development, vehicle scheduling, and crew scheduling. In this paper, according to the demand characteristics and operational purpose, a methodological framework that includes the elements of large-scale travel demand data processing and analysis, hierarchical clustering-based route origin-destination (OD region division, route OD region pairing, and a route selection model is proposed for CB network design. Considering the operating cost and social benefits, a route selection model is proposed and a branch-and-bound-based solution method is developed. In addition, a computer-aided program is developed to analyze a real-world Beijing CB route network design problem. The results of the case study demonstrate that the current CB network of Beijing can be significantly improved, thus demonstrating the effectiveness of the proposed methodology.

Case Study: The Hunger Pains--Ghrelin, Weight Loss, and Maintenance

Science.gov (United States)

Diener, Lynn M.

2013-01-01

This article presents a case study regarding healthy weight loss and the role of the hormone ghrelin in maintaining a lower body weight. This study was designed specifically for use in an introductory college-level physiology course. It addresses the use of the case study in teaching digestion and metabolism, exploring the role of hormones in…

Graduate Students in a Service Learning Design Case: The Development of a Parenting Program

Science.gov (United States)

Tracey, Monica W.; Kacin, Sara E.

2014-01-01

The following design case illustrates the approach a group of advanced graduate online-design students, two design coaches, and an instructor used to design an online instructional intervention as a service-learning project for parents interested in improving their parenting skills with their pre-teens. This design case is distinctive in that it…

A case-control study assessing depression in patients with periodontitis

Directory of Open Access Journals (Sweden)

Shiyamali Sundararajan

2017-01-01

Full Text Available Background: Chronic periodontitis is an inflammatory disease of the supporting structures of the tooth. One of the important non-oral risk factors for periodontitis is psychosocial stress and depression. Depression affects oral health by affecting the immune system through its effects on hypothalamic pituitary axis system. Periodontal inflammatory surface area (PISA is a system used to assess inflammatory burden in the periodontal tissue. Aim: The aim of this study is to assess the relationship between PISA and depression. Settings and Design: The design of the study is case-control study. Materials and Methods: The study design is a case-control study with forty patients each in case and control groups. The periodontal inflammatory level was assessed by PISA system and the levels of depression was assessed by using Beck's Depression Inventory (BDI. Statistical Analysis: Student's t-test was used to compare PISA and BDI scores. The BDI score (mean ± standard deviation [SD] for controls was 12.75 ± 6.82 compared to 22.73 ± 4.40 for the cases. The comparison (t = 7.78 was statistically significant at P < 0.0001. The PISA score (mean ± SD for controls was 210.47 ± 76.80 compared to the PISA score of 1069.50 ± 204.21 for cases which was statistically significant (t = 24.90; P < 0.0001. Results: Significantly higher BDI scores were observed in patients with chronic periodontitis than healthy controls. Conclusion: This study clearly reveals a significant association between the severity of depression and inflammatory burden.

Operationalizing privacy by design: the Ontario smart grid case study

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-02-15

The electrical industry is under perpetual evolution and the changes are becoming more and more complex. The current evolution of the Smart Grid in Ontario, Canada, will modify the entire utility infrastructure and it is therefore critical that the proposed solution also meets customer needs. The aim of this paper is to determine how best practices can be operationalized into smart grid systems. This study showed that the easiest, fastest and best way to implement privacy is in the earliest design stage. This study demonstrated the strategy of dealing with privacy after the fact makes it more difficult to satisfy privacy considerations.

Willowglen Systems Inc. : 8 case studies

Energy Technology Data Exchange (ETDEWEB)

NONE

2010-07-01

The various supervisory control and data acquisition (SCADA) systems designed by Willowglen Systems Inc. were described. The company provides custom SCADA technology products, automation systems, and technical services for various applications. Their remote terminal units (RTUs) were designed to have a very low power consumption rate, and can be operated from any power source. The company has also designed integrated metering and communications solutions for remote locations. The following 8 case studies of Willowglen System solutions were highlighted: (1) a SCADA system designed for the Northwest Territories Power Corporation, (2) a system of RTUs installed at the Shell Canada Ltd. Caroline Gas Complex, (3) a SCADA system designed to monitor a natural gas pipeline, (4) a SCADA system designed to monitor a transmission pipeline and distribution system in Singapore, (5) RTUs designed to monitor gas dehydration units in Bahrain, (6) a SCADA system designed for a refined petroleum products pipeline, (7) a SCADA system installed at an electric power utility in New Brunswick, and (8) a tank gauging system designed for a large oil refinery in Alberta. 7 figs.

The role of requirements management in the design of built environments: a case study

Directory of Open Access Journals (Sweden)

Camila Pegoraro

2011-12-01

Full Text Available Due to the known difficulties on managing the design process of built environments, researchers and entrepreneurs have continuously developed and implemented best practices from areas such as Project Management (PM. However, there are still gaps to be filled, such as difficulties on monitoring the stakeholder’s requirements and their dynamics. In attempt to eliminate this gap, this paper aims to analyze if requirements management (RM can be integrated to PM and which are the main advantages and disadvantages of this integration. The research includes a literature review which presents PM and RM concepts, the last one based on software engineering approach. Moreover, a case study was performed in a construction company, using semi-structured interviews. The research showed that the use of RM is advantageous, even not solving all the projects difficulties, and that the proper structuring of the projects is a condition for the success of RM implementation. The main contribution is a generic and systematic proposal for integrating the stages of the RM to the projects.

Underwater fuel handling equipment maintenance. Verification of design assumptions, specific problems and tools, case study

International Nuclear Information System (INIS)

Kurek, J.B.

1995-01-01

The majority of CANDU Fuel Transfer System equipment at Pickering is located under fourteen feet of water, as dictated by the containment and shielding requirements. Such arrangement, however, creates specific problems with equipment maintenance. Each single piece of equipment serves two generating units, which means in case of defect- double losses on production, or two units shut down simultaneously for planned maintenance. The requirement for underwater maintenance was not anticipated at the design stage, which multiples the level of difficulty, and creates requirement for developing special tools for each work. Removal of the damaged fuel from the receiving bays and decontamination of submerged equipment is also part of the problem. The purpose of this presentation is to share our experience with the designers, operators, maintenance mechanics and technical personnel of the other CANDU generating stations

Evaluation of Standard Concepts Design of Library Interior Physical Environment (Case Study at University of Ma Chung

Directory of Open Access Journals (Sweden)

Debri Haryndia Putri

2016-12-01

Full Text Available Currently the function of a room is not only used as a shelter, the function of the room itself to be increased as a refreshing or relaxation area for users to follow the development of creativity and technology in the field of design. The comfortable factor becomes the main factor that indicates a successful process of creating a space. No exception library. The nature of library seemed stiff because of its function as a place to read, now can be developed and made into more dynamic with the special design concepts or color patterns used. Libraries can be created a special concept that suits the characteristics of the users themselves. Most users of the library, especially in college libraries are teenagers. Naturally, teenagers like to gather with their friends and we have to facilitate this activity in our library design concept. In addition we can also determine the needs of users through research by questionnaire method. The answers of users can be mapped and drawn conclusions. To explore the research, the author reviewed some literature about library interior design and observed the library of Ma Chung University as a case study. The combined results of the method can be concluded and the discovery of ideal standards of physical environment. So, the library can be made as a comfortable reading environment so as to increased interest in reading behavior and the frequent visits of students in the library.

Postponed variety creation: case study in consumer electronics retail

DEFF Research Database (Denmark)

Appelqvist, Patrik; Gubi, Ebbe

2005-01-01

Purpose – Postponement is known as a way to reduce risk and inventories while still providing high product variety and acceptable response times. The paper is a case study that uses simulation for quantifying these benefits for a consumer electronics company. Design/methodology/approach – Improve...... modular product architecture can be utilised to improve operational supply chain performance.......Purpose – Postponement is known as a way to reduce risk and inventories while still providing high product variety and acceptable response times. The paper is a case study that uses simulation for quantifying these benefits for a consumer electronics company. Design....../methodology/approach – Improvement potential is first evaluated qualitatively through interviews with dealers of the case company. Next, the benefit of postponement is evaluated quantitatively using discrete-event simulation with data from operational ERP systems. The conclusions identify conditions under which postponement...

Hybrid-Wing-Body Vehicle Composite Fuselage Analysis and Case Study

Science.gov (United States)

Mukhopadhyay, Vivek

2014-01-01

Recent progress in the structural analysis of a Hybrid Wing-Body (HWB) fuselage concept is presented with the objective of structural weight reduction under a set of critical design loads. This pressurized efficient HWB fuselage design is presently being investigated by the NASA Environmentally Responsible Aviation (ERA) project in collaboration with the Boeing Company, Huntington Beach. The Pultruded Rod-Stiffened Efficient Unitized Structure (PRSEUS) composite concept, developed at the Boeing Company, is approximately modeled for an analytical study and finite element analysis. Stiffened plate linear theories are employed for a parametric case study. Maximum deflection and stress levels are obtained with appropriate assumptions for a set of feasible stiffened panel configurations. An analytical parametric case study is presented to examine the effects of discrete stiffener spacing and skin thickness on structural weight, deflection and stress. A finite-element model (FEM) of an integrated fuselage section with bulkhead is developed for an independent assessment. Stress analysis and scenario based case studies are conducted for design improvement. The FEM model specific weight of the improved fuselage concept is computed and compared to previous studies, in order to assess the relative weight/strength advantages of this advanced composite airframe technology

Management in Virtual Environments. Case Studies

OpenAIRE

Mazurek, Grzegorz; Gembicki, Michał; Krzemień, Grzegorz; Przegalińska, Aleksandra K.; Starostka, Justyna; Skorulska, Karolina; Prystupa-Rządca, Kaja

2015-01-01

The following publication consists of 12 case studies, which encompass various aspects of the ICT impact on contemporary businesses, focusing – among other things – on such concepts as: crowdsourcing, the internet of things, design thinking, digital entertainment, e-commerce, online and off-line distribution or social media marketing. EEA, Norway Grants Anna Goryńska

Genetic variations in the Dravidian population of South West coast of India: Implications in designing case-control studies.

Science.gov (United States)

D'Cunha, Anitha; Pandit, Lekha; Malli, Chaithra

2017-06-01

Indian data have been largely missing from genome-wide databases that provide information on genetic variations in different populations. This hinders association studies for complex disorders in India. This study was aimed to determine whether the complex genetic structure and endogamy among Indians could potentially influence the design of case-control studies for autoimmune disorders in the south Indian population. A total of 12 single nucleotide variations (SNVs) related to genes associated with autoimmune disorders were genotyped in 370 healthy individuals belonging to six different caste groups in southern India. Allele frequencies were estimated; genetic divergence and phylogenetic relationship within the various caste groups and other HapMap populations were ascertained. Allele frequencies for all genotyped SNVs did not vary significantly among the different groups studied. Wright's FSTwas 0.001 per cent among study population and 0.38 per cent when compared with Gujarati in Houston (GIH) population on HapMap data. The analysis of molecular variance results showed a 97 per cent variation attributable to differences within the study population and variation due to differences between castes. Phylogenetic analysis showed a separation of Dravidian population from other HapMap populations and particularly from GIH population. Despite the complex genetic origins of the Indian population, our study indicated a low level of genetic differentiation among Dravidian language-speaking people of south India. Case-control studies of association among Dravidians of south India may not require stratification based on language and caste.

Case Study: A Step-by-Step Guide to Students Writing Case Studies (and Tools for Novice Case Authors)

Science.gov (United States)

Prud'homme-Genereux, Annie

2015-01-01

In experimenting with ways of structuring the assignment and providing guidance to students, the author developed a series of tools that may be of interest to instructors wishing to implement a case-writing assignment in their course. This assignment is more suited for instructors experienced in case writing, as their knowledge of how to design a…

Evaluating a Tacit Knowledge Sharing Initiative: A Case Study

Science.gov (United States)

Gubbins, Claire; Corrigan, Siobhan; Garavan, Thomas N.; O'Connor, Christy; Leahy, Damien; Long, David; Murphy, Eamonn

2012-01-01

Purpose: This paper aims to present a case study illustrating the issues involved in the tacit knowledge conversion process and to determine whether such conversion delivers value to the organisation in terms of business value and return on investment (ROI). Design/methodology/approach: A single-case multiple baseline participants experimental…

Strategically Focused Training in Six Sigma Way: A Case Study

Science.gov (United States)

Pandey, Ashish

2007-01-01

Purpose: The purpose of the current study is to examine the utility of Six Sigma interventions as a performance measure and explore its applicability for making the training design and delivery operationally efficient and strategically effective. Design/methodology/approach: This is a single revelatory case study. Data were collected from multiple…

Masked Visual Analysis: Minimizing Type I Error in Visually Guided Single-Case Design for Communication Disorders.

Science.gov (United States)

Byun, Tara McAllister; Hitchcock, Elaine R; Ferron, John

2017-06-10

Single-case experimental designs are widely used to study interventions for communication disorders. Traditionally, single-case experiments follow a response-guided approach, where design decisions during the study are based on participants' observed patterns of behavior. However, this approach has been criticized for its high rate of Type I error. In masked visual analysis (MVA), response-guided decisions are made by a researcher who is blinded to participants' identities and treatment assignments. MVA also makes it possible to conduct a hypothesis test assessing the significance of treatment effects. This tutorial describes the principles of MVA, including both how experiments can be set up and how results can be used for hypothesis testing. We then report a case study showing how MVA was deployed in a multiple-baseline across-subjects study investigating treatment for residual errors affecting rhotics. Strengths and weaknesses of MVA are discussed. Given their important role in the evidence base that informs clinical decision making, it is critical for single-case experimental studies to be conducted in a way that allows researchers to draw valid inferences. As a method that can increase the rigor of single-case studies while preserving the benefits of a response-guided approach, MVA warrants expanded attention from researchers in communication disorders.

Applying social innovation theory to examine how community co-designed health services develop: using a case study approach and mixed methods.

Science.gov (United States)

Farmer, Jane; Carlisle, Karen; Dickson-Swift, Virginia; Teasdale, Simon; Kenny, Amanda; Taylor, Judy; Croker, Felicity; Marini, Karen; Gussy, Mark

2018-01-31

Citizen participation in health service co-production is increasingly enacted. A reason for engaging community members is to co-design services that are locally-appropriate and harness local assets. To date, much literature examines processes of involving participants, with little consideration of innovative services are designed, how innovations emerge, develop and whether they sustain or diffuse. This paper addresses this gap by examining co-designed initiatives through the lens of social innovation - a conceptualisation more attuned to analysing grassroots innovation than common health services research approaches considering top-down, technical innovations. This paper considers whether social innovation is a useful frame for examining co-designed services. Eighty-eight volunteer community-based participants from six rural Australian communities were engaged using the same, tested co-design framework for a 12-month design and then 12-month implementation phase, in 24 workshops (2014-16). Mixed, qualitative data were collected and used to formulate five case studies of community co-designed innovations. A social innovation theory, derived from literature, was applied as an analytical frame to examine co-design cases at 3 stages: innovation growth, development and sustainability/diffusion. Social innovation theory was found relevant in examining and understanding what occurred at each stage of innovation development. Innovations themselves were all adaptations of existing ideas. They emerged due to local participants combining knowledge from local context, own experiences and exemplars. External facilitation brought resources together. The project provided a protective niche in which pilot innovations developed, but they needed support from managers and/or policymakers to be implemented; and to be compatible with existing health system practices. For innovations to move to sustainability/diffusion required political relationships. Challenging existing practice

Servant Leadership through Distance Learning: A Case Study

Science.gov (United States)

Russell, Eric James

2013-01-01

This qualitative study explored the influence a distance learning servant leadership course had on the emergency service students' understanding of leadership. The research study utilized a case study design in order to tell the story of the lived experiences of the participants. The setting for the study was a state university in Utah, with the…

Information Design for “Weak Signal” detection and processing in Economic Intelligence: A case study on Health resources

Directory of Open Access Journals (Sweden)

Sahbi Sidhom

2011-12-01

Full Text Available The topics of this research cover all phases of “Information Design” applied to detect and profit from weak signals in economic intelligence (EI or business intelligence (BI. The field of the information design (ID applies to the process of translating complex, unorganized or unstructured data into valuable and meaningful information. ID practice requires an interdisciplinary approach, which combines skills in graphic design (writing, analysis processing and editing, human performances technology and human factors. Applied in the context of information system, it allows end-users to easily detect implicit topics known as “weak signals” (WS. In our approach to implement the ID, the processes cover the development of a knowledge management (KM process in the context of EI. A case study concerning information monitoring health resources is presented using ID processes to outline weak signals. Both French and American bibliographic databases were applied to make the connection to multilingual concepts in the health watch process.

A d-statistic for single-case designs that is equivalent to the usual between-groups d-statistic.

Science.gov (United States)

Shadish, William R; Hedges, Larry V; Pustejovsky, James E; Boyajian, Jonathan G; Sullivan, Kristynn J; Andrade, Alma; Barrientos, Jeannette L

2014-01-01

We describe a standardised mean difference statistic (d) for single-case designs that is equivalent to the usual d in between-groups experiments. We show how it can be used to summarise treatment effects over cases within a study, to do power analyses in planning new studies and grant proposals, and to meta-analyse effects across studies of the same question. We discuss limitations of this d-statistic, and possible remedies to them. Even so, this d-statistic is better founded statistically than other effect size measures for single-case design, and unlike many general linear model approaches such as multilevel modelling or generalised additive models, it produces a standardised effect size that can be integrated over studies with different outcome measures. SPSS macros for both effect size computation and power analysis are available.

Is it Possible to Design a Math-Art Instructional Practice? Cases of Pre-service Teachers

Directory of Open Access Journals (Sweden)

Işıkhan UĞUREL

2013-10-01

Full Text Available To many people, establishing relationships between mathematics and art is difficult or surprising. However, these two disciplines are quite interrelated. Today, the literature of mathematics reveals that there has been an increasing interest in interaction between these two disciplines. As also observed in our country, the studies on relationships between mathematics and art have gained more popularity in mathematics education. There is a course entitled, “Mathematics and Art” offered as one of elective courses and taught for ten years to juniors of the Department of Secondary Mathematics Education, Dokuz Eylül University. The course covers a wide range of activities derived from relationships between mathematics and music to activities derived from those between mathematics and handicraft. In this study, cases of pre-service teachers attending this course were analysed. They were asked to do an instructional design integrating mathematics into art at secondary education level. Their designs were analyzed based on the use of art in which contexts and for what purposes. Furthermore, their designs were analyzed in terms of whether they enhance learning. This qualitative study had a case study design. The participants were 43 pre-service mathematics teachers voluntarily selected from students taking the course. Descriptive analysis was done to analyze the data. As a consequence of the analysis, math-art instructional practices developed by pre-service teachers were clustered under three primary categories (good, average and inadequate. The majority of math-art instructional practices were categorized under the average category. In the study, these categories were described and cases in each category were discussed.

Designing Program Roadmaps to Catalyze Community Formation: A Case Study of the Long-Term Stewardship Science and Technology Roadmapword

International Nuclear Information System (INIS)

Dixon, Brent; Hanson, Duane; Matthern, Gretchen

2003-01-01

A number of broad perspective technology roadmaps have been developed in the last few years as tools for coordinating nation-wide research in targeted areas. These roadmaps share a common characteristic of coalescing the associated stakeholder groups into a special-interest community that is willing to work cooperatively in achieving the roadmap goals. These communities are key to roadmap implementation as they provide the collaborative energy necessary to obtain the political support and funding required for identified science and technology development efforts. This paper discusses the relationship between roadmaps and special-interest communities, using the recently drafted Department of Energy's Long-Term Stewardship Science and Technology Roadmap as a case study. Specific aspects this roadmap's design facilitated the development of a long-term stewardship community while specific realities during roadmap development impacted the realization of the design

Postponed variety creation: case study in consumer electronics retail

DEFF Research Database (Denmark)

Appelqvist, Patrik; Gubi, Ebbe

2004-01-01

Purpose – Postponement is known as a way to reduce risk and inventories while still providing high product variety and acceptable response times. The paper is a case study that uses simulation for quantifying these benefits for a consumer electronics company. Design/methodology/approach – Improve......Purpose – Postponement is known as a way to reduce risk and inventories while still providing high product variety and acceptable response times. The paper is a case study that uses simulation for quantifying these benefits for a consumer electronics company. Design...... is beneficial in retail. Findings – In the case company, shop inventory is necessary for high-volume and low-variety products. Postponing variety creation to shops has the potential to decrease inventories for these products by 40-80 per cent. The benefits of postponement depend on delivery speed requirement......, product value, product variety and shop size. Research limitations/implications – Many contributions on postponement have been conceptual. This study contains a quantitative test. The study considers both the spatial dimension (where) and the temporal dimension (when) of postponement. Practical...

Postponed variety creation: case study in consumer electronics retail

DEFF Research Database (Denmark)

Appelqvist, Patrik; Gubi, Ebbe

2005-01-01

Purpose – Postponement is known as a way to reduce risk and inventories while still providing high product variety and acceptable response times. The paper is a case study that uses simulation for quantifying these benefits for a consumer electronics company. Design/methodology/approach – Improve......Purpose – Postponement is known as a way to reduce risk and inventories while still providing high product variety and acceptable response times. The paper is a case study that uses simulation for quantifying these benefits for a consumer electronics company. Design...... is beneficial in retail. Findings – In the case company, shop inventory is necessary for high-volume and low-variety products. Postponing variety creation to shops has the potential to decrease inventories for these products by 40-80 per cent. The benefits of postponement depend on delivery speed requirement......, product value, product variety and shop size. Research limitations/implications – Many contributions on postponement have been conceptual. This study contains a quantitative test. The study considers both the spatial dimension (where) and the temporal dimension (when) of postponement. Practical...

The role of economic evaluation in the decision-making process of family physicians: design and methods of a qualitative embedded multiple-case study

Science.gov (United States)

Lessard, Chantale; Contandriopoulos, André-Pierre; Beaulieu, Marie-Dominique

2009-01-01

Background A considerable amount of resource allocation decisions take place daily at the point of the clinical encounter; especially in primary care, where 80 percent of health problems are managed. Ignoring economic evaluation evidence in individual clinical decision-making may have a broad impact on the efficiency of health services. To date, almost all studies on the use of economic evaluation in decision-making used a quantitative approach, and few investigated decision-making at the clinical level. An important question is whether economic evaluations affect clinical practice. The project is an intervention research study designed to understand the role of economic evaluation in the decision-making process of family physicians (FPs). The contributions of the project will be from the perspective of Pierre Bourdieu's sociological theory. Methods/design A qualitative research strategy is proposed. We will conduct an embedded multiple-case study design. Ten case studies will be performed. The FPs will be the unit of analysis. The sampling strategies will be directed towards theoretical generalization. The 10 selected cases will be intended to reflect a diversity of FPs. There will be two embedded units of analysis: FPs (micro-level of analysis) and field of family medicine (macro-level of analysis). The division of the determinants of practice/behaviour into two groups, corresponding to the macro-structural level and the micro-individual level, is the basis for Bourdieu's mode of analysis. The sources of data collection for the micro-level analysis will be 10 life history interviews with FPs, documents and observational evidence. The sources of data collection for the macro-level analysis will be documents and 9 open-ended, focused interviews with key informants from medical associations and academic institutions. The analytic induction approach to data analysis will be used. A list of codes will be generated based on both the original framework and new themes

The role of economic evaluation in the decision-making process of family physicians: design and methods of a qualitative embedded multiple-case study

Directory of Open Access Journals (Sweden)

Beaulieu Marie-Dominique

2009-02-01

Full Text Available Abstract Background A considerable amount of resource allocation decisions take place daily at the point of the clinical encounter; especially in primary care, where 80 percent of health problems are managed. Ignoring economic evaluation evidence in individual clinical decision-making may have a broad impact on the efficiency of health services. To date, almost all studies on the use of economic evaluation in decision-making used a quantitative approach, and few investigated decision-making at the clinical level. An important question is whether economic evaluations affect clinical practice. The project is an intervention research study designed to understand the role of economic evaluation in the decision-making process of family physicians (FPs. The contributions of the project will be from the perspective of Pierre Bourdieu's sociological theory. Methods/design A qualitative research strategy is proposed. We will conduct an embedded multiple-case study design. Ten case studies will be performed. The FPs will be the unit of analysis. The sampling strategies will be directed towards theoretical generalization. The 10 selected cases will be intended to reflect a diversity of FPs. There will be two embedded units of analysis: FPs (micro-level of analysis and field of family medicine (macro-level of analysis. The division of the determinants of practice/behaviour into two groups, corresponding to the macro-structural level and the micro-individual level, is the basis for Bourdieu's mode of analysis. The sources of data collection for the micro-level analysis will be 10 life history interviews with FPs, documents and observational evidence. The sources of data collection for the macro-level analysis will be documents and 9 open-ended, focused interviews with key informants from medical associations and academic institutions. The analytic induction approach to data analysis will be used. A list of codes will be generated based on both the original

Basics of case report form designing in clinical research.

Science.gov (United States)

Bellary, Shantala; Krishnankutty, Binny; Latha, M S

2014-10-01

Case report form (CRF) is a specialized document in clinical research. It should be study protocol driven, robust in content and have material to collect the study specific data. Though paper CRFs are still used largely, use of electronic CRFs (eCRFS) are gaining popularity due to the advantages they offer such as improved data quality, online discrepancy management and faster database lock etc. Main objectives behind CRF development are preserving and maintaining quality and integrity of data. CRF design should be standardized to address the needs of all users such as investigator, site coordinator, study monitor, data entry personnel, medical coder and statistician. Data should be organized in a format that facilitates and simplifies data analysis. Collection of large amount of data will result in wasted resources in collecting and processing it and in many circumstances, will not be utilized for analysis. Apart from that, standard guidelines should be followed while designing the CRF. CRF completion manual should be provided to the site personnel to promote accurate data entry by them. These measures will result in reduced query generations and improved data integrity. It is recommended to establish and maintain a library of templates of standard CRF modules as they are time saving and cost-effective. This article is an attempt to describe the methods of CRF designing in clinical research and discusses the challenges encountered in this process.

Nature-inspired design strategies in sustainable product development : A case study of student projects

NARCIS (Netherlands)

De Pauw, I.C.; Karana, E.; Kandachar, P.V.

2012-01-01

In design practice, Nature-Inspired Design Strategies (NIDS) can be applied when developing sustainable products. However, knowledge on how this actually helps designers is lacking. This study explores the effects of applying Cradle to Cradle and Biomimicry in student projects, as compared to using

Implementation of case studies in undergraduate didactic nursing courses: a qualitative study.

Science.gov (United States)

Dutra, Danette K

2013-07-04

The implementation of unfolding scenario-based case studies in the didactic classroom is associated with learner-centered education. The utilization of learner-centered pedagogies, such as case studies, removes the focus from the instructor and instead places it on the student. Learner-centered pedagogies are believed to improve students' levels of cognition. The purpose of this study was to examine how nurse educators are implementing the pedagogies of case studies in their undergraduate didactic courses. The goal was to examine, document, report, and, ultimately, implement the strategies. Purposeful sampling was utilized in this qualitative, multisite-designed study. For each of the four participants, three separate site visits were completed. Observations and post-observational interviews took place at each site visit. Transcribed data from interviews, observations, and course documents were imported into the computer program Nvivo8. Repetitive comparative analysis was utilized to complete the data coding process. The guiding research question of this study sought to investigate the implementation strategies of case studies in didactic nursing courses. The implementation of case studies by the participants reflected two primary patterns: Formal Implementation (FI) and Informal Implementation (II) of case studies. The FI of case studies was further divided into two subcategories: Formal Implementation of case studies used Inside the Classroom setting (FIIC) and Formal Implementation of cases studies used Outside of the Classroom (FIOC). Results of this investigation have led to an increased understanding of implementation strategies of unfolding scenario-based case studies in undergraduate nursing didactic courses. Data collected were rich in the description of specific methodologies for utilization of case studies and may serve as a resource for faculty in development of creative strategies to enhance the didactic classroom experience.

DOE ZERH Case Study: Heirloom Design Build, Euclid Avenue, Atlanta, GA

Energy Technology Data Exchange (ETDEWEB)

none,

2015-09-01

Case study of a DOE 2015 Housing Innovation Award winning custom home in the mixed-humid climate that got a HERS 50 without PV, with 2x6 16” on center walls with R-19 ocsf; basement with R-28 ccsf, R-5 rigid foam under slab; sealed attic with R-28 ocsf under roof deck; 22.8 SEER; 12.5 HSPF heat pump.

Single-Case Designs and Qualitative Methods: Applying a Mixed Methods Research Perspective

Science.gov (United States)

Hitchcock, John H.; Nastasi, Bonnie K.; Summerville, Meredith

2010-01-01

The purpose of this conceptual paper is to describe a design that mixes single-case (sometimes referred to as single-subject) and qualitative methods, hereafter referred to as a single-case mixed methods design (SCD-MM). Minimal attention has been given to the topic of applying qualitative methods to SCD work in the literature. These two…

Using multimedia cases for educating the primary school mathematics teacher educator: a design study

NARCIS (Netherlands)

Dolk, M.L.A.M.; Hertog, den J.B.; Gravemeijer, K.P.E.

2002-01-01

The overarching goal of this chapter is to better understand how multimedia video case studies can support the professionalization of primary-school-mathematics teacher educators. We investigate the use of multimedia cases to support teacher educators in learning to mathematize and didactize and to

Design and control of automated guided vehicle systems: A case study

NARCIS (Netherlands)

Li, Q.; Adriaansen, A.C.; Udding, J.T.; Pogromski, A.Y.

2011-01-01

In this paper, we study the design and control of automated guided vehicle (AGV) systems, with the focus on the quayside container transport in an automated container terminal. We first set up an event-driven model for an AGV system in the zone control framework. Then a number of layouts of the road

Unified modeling language and design of a case-based retrieval system in medical imaging.

Science.gov (United States)

LeBozec, C; Jaulent, M C; Zapletal, E; Degoulet, P

1998-01-01

One goal of artificial intelligence research into case-based reasoning (CBR) systems is to develop approaches for designing useful and practical interactive case-based environments. Explaining each step of the design of the case-base and of the retrieval process is critical for the application of case-based systems to the real world. We describe herein our approach to the design of IDEM--Images and Diagnosis from Examples in Medicine--a medical image case-based retrieval system for pathologists. Our approach is based on the expressiveness of an object-oriented modeling language standard: the Unified Modeling Language (UML). We created a set of diagrams in UML notation illustrating the steps of the CBR methodology we used. The key aspect of this approach was selecting the relevant objects of the system according to user requirements and making visualization of cases and of the components of the case retrieval process. Further evaluation of the expressiveness of the design document is required but UML seems to be a promising formalism, improving the communication between the developers and users.

Design study of superconducting magnets for a combustion magnetohydrodynamic (MHD) generator

Science.gov (United States)

Thome, R. J.; Ayers, J. W.

1977-01-01

Design trade off studies for 13 different superconducting magnet systems were carried out. Based on these results, preliminary design characteristics were prepared for several superconducting magnet systems suitable for use with a combustion driven MHD generator. Each magnet generates a field level of 8 T in a volume 1.524 m (60 in.) long with a cross section 0.254 m x 0.254 m (10 in. x 10 in.) at the inlet and 0.406 m x .406 m (16 in. x 16 in.) at the outlet. The first design involves a racetrack coil geometry intended for operation at 4.2 K; the second design uses a racetrack geometry at 2.0 K; and the third design utilizes a rectangular saddle geometry at 4.2 K. Each case was oriented differently in terms of MHD channel axis and main field direction relative to gravity in order to evaluate fabrication ease. All cases were designed such that the system could be disassembled to allow for alteration of field gradient in the MHD channel by changing the angle between coils. Preliminary design characteristics and assembly drawings were generated for each case.

The Role of Habitability Studies in Space Facility and Vehicle Design

Science.gov (United States)

Adams, Constance M.

1999-01-01

This document is a viewgraph presentation which reviews the role of the space architect in designing a space vehicle with habitability as a chief concern. Habitability is composed of the qualities of the environment or system which support the crew in working and living. All the impacts from habitability are interdependent; i.e., impacts to well-being can impact performance, safety or efficiency. After reviewing the issues relating to habitability the presentation discusses the application of these issues in two case studies. The first studies the Bio-Plex Hab chamber which includes designs of the living and working areas. The second case study is the ISS-TransHab which is being studied as a prototype for Mars transit.

Identifying Effective Design Approaches to Allocate Genotypes in Two-Phase Designs: A Case Study in Pelargonium zonale

Directory of Open Access Journals (Sweden)

Heike Molenaar

2018-01-01

Full Text Available Robust phenotypic data allow adequate statistical analysis and are crucial for any breeding purpose. Such data is obtained from experiments laid out to best control local variation. Additionally, experiments frequently involve two phases, each contributing environmental sources of variation. For example, in a former experiment we conducted to evaluate production related traits in Pelargonium zonale, there were two consecutive phases, each performed in a different greenhouse. Phase one involved the propagation of the breeding strains to obtain the stem cutting count, and phase two involved the assessment of root formation. The evaluation of the former study raised questions regarding options for improving the experimental layout: (i Is there a disadvantage to using exactly the same design in both phases? (ii Instead of generating a separate layout for each phase, can the design be optimized across both phases, such that the mean variance of a pair-wise treatment difference (MVD can be decreased? To answer these questions, alternative approaches were explored to generate two-phase designs either in phase-wise order (Option 1 or across phases (Option 2. In Option 1 we considered the scenarios (i using in both phases the same experimental design and (ii randomizing each phase separately. In Option 2, we considered the scenarios (iii generating a single design with eight replicates and splitting these among the two phases, (iv separating the block structure across phases by dummy coding, and (v design generation with optimal alignment of block units in the two phases. In both options, we considered the same or different block structures in each phase. The designs were evaluated by the MVD obtained by the intra-block analysis and the joint inter-block–intra-block analysis. The smallest MVD was most frequently obtained for designs generated across phases rather than for each phase separately, in particular when both phases of the design were

Identifying Effective Design Approaches to Allocate Genotypes in Two-Phase Designs: A Case Study in Pelargonium zonale.

Science.gov (United States)

Molenaar, Heike; Boehm, Robert; Piepho, Hans-Peter

2017-01-01

Robust phenotypic data allow adequate statistical analysis and are crucial for any breeding purpose. Such data is obtained from experiments laid out to best control local variation. Additionally, experiments frequently involve two phases, each contributing environmental sources of variation. For example, in a former experiment we conducted to evaluate production related traits in Pelargonium zonale , there were two consecutive phases, each performed in a different greenhouse. Phase one involved the propagation of the breeding strains to obtain the stem cutting count, and phase two involved the assessment of root formation. The evaluation of the former study raised questions regarding options for improving the experimental layout: (i) Is there a disadvantage to using exactly the same design in both phases? (ii) Instead of generating a separate layout for each phase, can the design be optimized across both phases, such that the mean variance of a pair-wise treatment difference (MVD) can be decreased? To answer these questions, alternative approaches were explored to generate two-phase designs either in phase-wise order (Option 1) or across phases (Option 2). In Option 1 we considered the scenarios (i) using in both phases the same experimental design and (ii) randomizing each phase separately. In Option 2, we considered the scenarios (iii) generating a single design with eight replicates and splitting these among the two phases, (iv) separating the block structure across phases by dummy coding, and (v) design generation with optimal alignment of block units in the two phases. In both options, we considered the same or different block structures in each phase. The designs were evaluated by the MVD obtained by the intra-block analysis and the joint inter-block-intra-block analysis. The smallest MVD was most frequently obtained for designs generated across phases rather than for each phase separately, in particular when both phases of the design were separated with a

Designing a Mobile Application: The Case of iAdvocate

Directory of Open Access Journals (Sweden)

Alan R. Foley

2012-01-01

Full Text Available In this article, the design of a mobile application (app called iAdvocate is illustrated. The goal of iAdvocate is to share and develop specific strategies with parents of children with disabilities for working collaboratively with a school team to improve their children’s education. iAdvocate uses problem-based learning strategies, simulations, and provides contextual access resources to build parental advocacy skills and knowledge. iAdvocate provides parents with both information and strategies regarding their educational rights and getting their child’s needs met. The goal of iAdvocate is to share and develop specific strategies with parents for working collaboratively with a school team to improve their children’s education. iAdvocate contains three sections: strategies, a compilation of approaches that parents can pursue as advocates; resources, which lists and, where possible, links to such references as laws, books, articles, web sites, video presentations, and organizations that provide information on inclusive education; and, responses, which features simulated interactions, such as replies to common statements made by school professionals regarding services and accommodations for children. This case illustrates the design processes and techniques used to develop an instructional mobile application by presenting the background and context of the project, initial design and design iterations, negative case analysis, and prototyping. Additional documents illustrating the project background, and design process are also included.

Drug and alcohol crash risk : a case-control study.

Science.gov (United States)

2016-12-01

This study used a case-control design to estimate the risk of crashes involving drivers using drugs, alcohol or both. Data was collected in Virginia Beach, Virginia, for 20 months. The study obtained biological measures on more than 3,000 crash...

Rationale and design of INTERSTROKE: a global case-control study of risk factors for stroke

DEFF Research Database (Denmark)

O'Donnell, M; Serpault, Damien Xavier; Diener, C

2010-01-01

with a first stroke within 72 h of hospital presentation in whom CT or MRI is performed. Proxy respondents are used for cases unable to communicate. Etiological and topographical stroke subtype is documented for all cases. Controls are hospital- and community-based, matched for gender, ethnicity and age (+/-5...... years). A questionnaire (cases and controls) is used to acquire information on known and proposed risk factors for stroke. Cardiovascular (e.g. blood pressure) and anthropometric (e.g. waist-to-hip ratio) measurements are obtained at the time of interview. Nonfasting blood samples and random urine......-income countries is inadequate, where a very large burden of stroke occurs. Accordingly, a similar epidemiological study is required for stroke, to inform effective population-based strategies to reduce the risk of stroke. Methods: INTERSTROKE is an international, multicenter case-control study. Cases are patients...

Theories and Applications of Massive Online Open Courses (MOOCs): The Case for Hybrid Design

Science.gov (United States)

Anders, Abram

2015-01-01

Initial studies of learning in massive open online courses (MOOCs) primarily focused on participation patterns and participant experiences. More recently, research has addressed learning theories and offered case studies of different pedagogical designs for MOOCs. Based on a meta-analysis and synthesis of the research literature, this study…

Professional development for design-based learning in engineering education: a case study

Science.gov (United States)

Gómez Puente, Sonia M.; van Eijck, Michiel; Jochems, Wim

2015-01-01

Design-based learning (DBL) is an educational approach in which students gather and apply theoretical knowledge to solve design problems. In this study, we examined how critical DBL dimensions (project characteristics, design elements, the teacher's role, assessment, and social context) are applied by teachers in the redesign of DBL projects. We conducted an intervention for the professional development of the DBL teachers in the Mechanical Engineering and the Electrical Engineering departments. We used the Experiential Learning Cycle as an educational model for the professionalisation programme. The findings show that the programme encouraged teachers to apply the DBL theoretical framework. However, there are some limitations with regard to specific project characteristics. Further research into supporting teachers to develop open-ended and multidisciplinary activities in the projects that support learning is recommended.

Methodology or method? A critical review of qualitative case study reports

Directory of Open Access Journals (Sweden)

Nerida Hyett

2014-05-01

Full Text Available Despite on-going debate about credibility, and reported limitations in comparison to other approaches, case study is an increasingly popular approach among qualitative researchers. We critically analysed the methodological descriptions of published case studies. Three high-impact qualitative methods journals were searched to locate case studies published in the past 5 years; 34 were selected for analysis. Articles were categorized as health and health services (n=12, social sciences and anthropology (n=7, or methods (n=15 case studies. The articles were reviewed using an adapted version of established criteria to determine whether adequate methodological justification was present, and if study aims, methods, and reported findings were consistent with a qualitative case study approach. Findings were grouped into five themes outlining key methodological issues: case study methodology or method, case of something particular and case selection, contextually bound case study, researcher and case interactions and triangulation, and study design inconsistent with methodology reported. Improved reporting of case studies by qualitative researchers will advance the methodology for the benefit of researchers and practitioners.

Methodology or method? A critical review of qualitative case study reports

Science.gov (United States)

Hyett, Nerida; Kenny, Amanda; Dickson-Swift, Virginia

2014-01-01

Despite on-going debate about credibility, and reported limitations in comparison to other approaches, case study is an increasingly popular approach among qualitative researchers. We critically analysed the methodological descriptions of published case studies. Three high-impact qualitative methods journals were searched to locate case studies published in the past 5 years; 34 were selected for analysis. Articles were categorized as health and health services (n=12), social sciences and anthropology (n=7), or methods (n=15) case studies. The articles were reviewed using an adapted version of established criteria to determine whether adequate methodological justification was present, and if study aims, methods, and reported findings were consistent with a qualitative case study approach. Findings were grouped into five themes outlining key methodological issues: case study methodology or method, case of something particular and case selection, contextually bound case study, researcher and case interactions and triangulation, and study design inconsistent with methodology reported. Improved reporting of case studies by qualitative researchers will advance the methodology for the benefit of researchers and practitioners. PMID:24809980

Examination of Student Outcomes in Play Therapy: A Qualitative Case Study Design

Science.gov (United States)

Dillman Taylor, Dalena L.; Blount, Ashley J.; Bloom, Zachary

2017-01-01

Outcome research examining the effectiveness of teaching methods in counselor education is sparse. The researchers conducted a qualitative investigation utilizing an instrumental case study to examine the influence of a constructivist-developmental format on a play therapy counseling course in a large CACREP accredited university in the…

Using Interpretive Qualitative Case Studies for Exploratory Research in Doctoral Studies: A Case of Information Systems Research in Small and Medium Enterprises

Directory of Open Access Journals (Sweden)

Shana R. Ponelis

2015-12-01

Full Text Available The use of the case study method has gained mainstream acceptance in both entrepreneurship and information systems research to develop conceptual and theoretical models that are novel, yet grounded in the literature. In spite of many texts on the case study method and the growing acceptance and use of thereof, there are relatively few examples that discuss how to apply the case study method. The purpose of this paper is to provide such an example by drawing upon the author’s research for her doctoral dissertation in the discipline of information systems and entrepreneurship research. First, the use of qualitative case studies as research method is motivated, then the importance of the research paradigm is discussed and the interpretivist research paradigm justified followed by a detailed discussion of the research design. The paper concludes with a discussion of lessons learned and recommendations based on the author’s experience with using the case study method. The practical yet theoretically founded approach of this paper may be useful to doctoral students who are considering or using the case study method. Equally, supervisors and others involved in research training may find this paper useful as an illustrative example of the case study method for their students.

Teacher design of technology for emergent literacy: An explorative feasibility study

NARCIS (Netherlands)

McKenney, Susan; Voogt, Joke

2012-01-01

The active participation of teachers in designing classroom learning experiences contributes to teacher abilities to facilitate learning. This paper reports on a case study of one Dutch teacher designing a technology-rich learning environment for emergent literacy. Data was collected to explore the

System Dynamic Modelling for a Balanced Scorecard: A Case Study

DEFF Research Database (Denmark)

Nielsen, Steen; Nielsen, Erland Hejn

Purpose - The purpose of this research is to make an analytical model of the BSC foundation by using a dynamic simulation approach for a 'hypothetical case' model, based on only part of an actual case study of BSC. Design/methodology/approach - The model includes five perspectives and a number...

Structural design of an in-line bolted joint for the space shuttle solid rocket motor case segments

Science.gov (United States)

Dorsey, John T.; Stein, Peter A.; Bush, Harold G.

1987-01-01

Results of a structural design study of an in-line bolted joint concept which can be used to assemble Space Shuttle Solid Rocket Motor (SRM) case segments are presented. Numerous parametric studies are performed to characterize the in-line bolted joint behavior as major design variables are altered, with the primary objective always being to keep the inside of the joint (where the O-rings are located) closed during the SRM firing. The resulting design has 180 1-inch studs, an eccentricity of -0.5 inch, a flange thickness of 3/4 inch, a bearing plate thickness of 1/4 inch, and the studs are subjected to a preload which is 70% of ultimate. The mass penalty per case segment joint for the in-line design is 346 lbm more than the weight penalty for the proposed capture tang fix.

Case Studies in a Physiology Course on the Autonomic Nervous System: Design, Implementation, and Evaluation

Science.gov (United States)

Zimmermann, Martina

2010-01-01

The introduction of case studies on the autonomic nervous system in a fourth-semester physiology course unit for Pharmacy students is described in this article. This article considers how these case studies were developed and presents their content. Moreover, it reflects on their implementation and, finally, the reception of such a transformation…

Basics of case report form designing in clinical research

Directory of Open Access Journals (Sweden)

Shantala Bellary

2014-01-01

Full Text Available Case report form (CRF is a specialized document in clinical research. It should be study protocol driven, robust in content and have material to collect the study specific data. Though paper CRFs are still used largely, use of electronic CRFs (eCRFS are gaining popularity due to the advantages they offer such as improved data quality, online discrepancy management and faster database lock etc. Main objectives behind CRF development are preserving and maintaining quality and integrity of data. CRF design should be standardized to address the needs of all users such as investigator, site coordinator, study monitor, data entry personnel, medical coder and statistician. Data should be organized in a format that facilitates and simplifies data analysis. Collection of large amount of data will result in wasted resources in collecting and processing it and in many circumstances, will not be utilized for analysis. Apart from that, standard guidelines should be followed while designing the CRF. CRF completion manual should be provided to the site personnel to promote accurate data entry by them. These measures will result in reduced query generations and improved data integrity. It is recommended to establish and maintain a library of templates of standard CRF modules as they are time saving and cost-effective. This article is an attempt to describe the methods of CRF designing in clinical research and discusses the challenges encountered in this process.

Effectiveness of the live attenuated rotavirus vaccine produced by a domestic manufacturer in China studied using a population-based case-control design.

Science.gov (United States)

Zhen, Shan-Shan; Li, Yue; Wang, Song-Mei; Zhang, Xin-Jiang; Hao, Zhi-Yong; Chen, Ying; Wang, Dan; Zhang, Yan-Hong; Zhang, Zhi-Yong; Ma, Jing-Chen; Zhou, Peng; Zhang, Zhen; Jiang, Zhi-Wei; Zhao, Yu-Liang; Wang, Xuan-Yi

2015-10-01

A universal rotavirus (RV) immunization program is a potentially cost-effective measure for preventing RV infection in China. However, the efficacy of the only licensed RV vaccine (Lanzhou lamb rotavirus vaccine, LLR), which is made by a domestic manufacturer, has not been proven by a properly designed clinical trial. In October 2011 to March 2012, to measure the potential protection provided by LLR, a case-control study nested in a population-based active diarrhea surveillance study of children control study comparing non-RV viral diarrheal cases with non-diarrheal controls in the same population found that the RV vaccine offered no protection against non-RV diarrhea. Even under a less ideal immunization schedule, the oral LLR conferred a certain level of protection against RV gastroenteritis. However, further studies are needed to understand the full characteristics of the LLR, including its efficacy when administered following the optimal regimen, the potential risk of inducing intussusception, and the direct and indirect protective effects of LLR.

Computer aided fixture design - A case based approach

Science.gov (United States)

Tanji, Shekhar; Raiker, Saiesh; Mathew, Arun Tom

2017-11-01

Automated fixture design plays important role in process planning and integration of CAD and CAM. An automated fixture setup design system is developed where when fixturing surfaces and points are described allowing modular fixture components to get automatically select for generating fixture units and placed into position with satisfying assembled conditions. In past, various knowledge based system have been developed to implement CAFD in practice. In this paper, to obtain an acceptable automated machining fixture design, a case-based reasoning method with developed retrieval system is proposed. Visual Basic (VB) programming language is used in integrating with SolidWorks API (Application programming interface) module for better retrieval procedure reducing computational time. These properties are incorporated in numerical simulation to determine the best fit for practical use.