Sample records for capillary electrophoretic monitoring


    The electrophoretic behavior of bensulfuron Me, sulfometuron Me, nicosulfuron (Accent), chlorimuron Et, thifensulfuron Me (Harmony), metsulfuron Me, and chlorsulfuron was studied under capillary zone electrophoresis (CZE) and micellar electrokinetic chromatography (MEKC) conditio...

  2. Capillary electrophoretic behavior of seven sulfonylureas. (United States)

    Matchett, W H; Winnik, W; Brumley, W C


    The electrophoretic behavior of seven sulfonylureas (bensulfuron methyl, sulfometuron methyl, nicosulfuron [accent], chlorimuron ethyl, thifensulfuron methyl [harmony], metsulfuron methyl, and chlorsulfuron) was studied under capillary zone electrophoresis (CZE) and micellar electrokinetic chromatography (MEKC) conditions. Mixtures of these compounds were separated with very high efficiencies (2 x 10(5) theoretical plates) in a running buffer consisting of 3 parts acetate buffer (25 mM, pH 5.0) and 1 part acetonitrile. In this buffer system, acetonitrile was shown to be superior to methanol, acetone, and ethanol as a nonpolar additive, but any of these solvents can be used to reduce electroosmotic flow (EOF) and to obtain adequate separation. On-column detection limits at 214 nM were of the order of 80-100 fM. Micellar agents such as sodium dodecyl sulfate (SDS) and sodium cholate (but not monosialoganglioside-Gm1 or starburst dendrimer, generation 2.5) improved separation in phosphate and borate buffers. Implications of these results for the development of methods to detect these compounds on matrices of environmental origin are discussed. In particular, the instability of these compounds in methanol is noted and degradation products are detected using free zone CE. The methanolysis products of sulfometuron are tentatively identified by tandem MS (negative ion conditions) as 2-amino-4,6-dimethylpyrimidine and 2-carboxymethylbenz(N-carboxymethyl)sulfonamide.

  3. Capillary electrophoretic and mass spectrometric analysis of a polydisperse fluorosurfactant. (United States)

    Al-Jarah, Suhair Yousif; Sjödahl, Johan; Woldegiorgis, Andreas; Emmer, Asa


    A fluorosurfactant has been studied using capillary electrophoresis and mass spectrometry. The fluorosurfactant, FC134, can be used as a buffer additive in capillary electrophoresis in order to decrease wall adsorption of proteins and in micellar electrokinetic chromatography. However, it has been discovered that this fluorosurfactant is polydisperse, thus containing substances with different lengths and structures. In this work, the fluorosurfactant sample components were separated by capillary electrophoresis. An uncoated as well as a poly(vinyl alcohol)-coated capillary were used with running electrolytes containing methanol and acetic acid. Following the capillary electrophoretic separation, fractions were collected for further analysis by MALDI-MS. Non-fractionated samples were also analyzed both by MALDI-MS and by ESI-MS.

  4. Capillary electrophoretic study on UDP-sugars in cells

    Institute of Scientific and Technical Information of China (English)


    Glucose is an important regulator of cell growth and metabolism. Uridine diphosphate sugars (UDP-sugars), as the intermediate products of metabolism, play pivotal roles as precursors in the synthesis of complex carbohydrates and glycolipids as well as lectose. It is very important to study their metabolism in cells in clinical biochemistry. A capillary electrophoretic method has been developed for the analysis of UDP-sugars and nucleotides. By using an uncoated capillary (70cm×50 μm) and 20 mmol/L borax buffer (pH 9), 4 important UDP-sugars can be analyzed in 15 min at 22 kV with satisfactory precision and sensitivity. The developed method has been applied to analyze UDP-sugars concentrations in lymphocytes, fibroblasts and mesangial cells, and the results show it not only is much better than HPLC method, but also can be used to measure the energy charge of cells.

  5. Capillary electrophoretic study on UDP-sugars in cells

    Institute of Scientific and Technical Information of China (English)

    许国旺; R.Lehmann; 路鑫; H.M.Liebich; 张玉奎; 卢佩章


    Glucose is an important regulator of cell growth and metabolism. Uridine diphosphate sugars (UDP-sugars), as the intermediate products of metabolism, play pivotal roles as precursors in the synthesis of complex carbohydrates and glycolipids as well as lectose. It is very important to study their metabolism in cells in clinical biochemistry. A capillary electrophoretic method has been developed for the analysis of UDP-sugars and nucleotides. By using an uncoated capillary (70cm×50μm) and 20 mmol/L borax buffer (pH 9), 4 important UDP-sugars can be analyzed in 15 min at 22 kV with satisfactory precision and sensitivity. The developed method has been applied to analyze UDP-sugars concentrations in lymphocytes, fibroblasts and mesangial cells, and the results show it not only is much better than HPLC method, but also can be used to measure the energy charge of cells.

  6. Bacterial surface layer proteins as a novel capillary coating material for capillary electrophoretic separations

    Energy Technology Data Exchange (ETDEWEB)

    Moreno-Gordaliza, Estefanía, E-mail: [Division of Analytical Biosciences, Leiden Academic Centre for Drug Research, Universiteit Leiden, Einsteinweg 55, 2300, RA, Leiden (Netherlands); Department of Analytical Chemistry, Faculty of Chemistry, Universidad Complutense de Madrid, Avda. Complutense s/n, 28040, Madrid (Spain); Stigter, Edwin C.A. [Division of Analytical Biosciences, Leiden Academic Centre for Drug Research, Universiteit Leiden, Einsteinweg 55, 2300, RA, Leiden (Netherlands); Department of Molecular Cancer Research, Universitair Medisch Centrum Utrecht, Wilhelmina Kinder Ziekenhuis, Lundlaan 6, 3584, EA Utrecht (Netherlands); Lindenburg, Petrus W.; Hankemeier, Thomas [Division of Analytical Biosciences, Leiden Academic Centre for Drug Research, Universiteit Leiden, Einsteinweg 55, 2300, RA, Leiden (Netherlands)


    A novel concept for stable coating in capillary electrophoresis, based on recrystallization of surface layer proteins on hydrophobized fused silica capillaries, was demonstrated. Surface layer protein A (SlpA) from Lactobacillus acidophilus bacteria was extracted, purified and used for coating pre-silanized glass substrates presenting different surface wettabilities (either hydrophobic or hydrophilic). Contact angle determination on SlpA-coated hydrophobic silica slides showed that the surfaces turned to hydrophilic after coating (53 ± 5°), due to a protein monolayer formation by protein-surface hydrophobic interactions. Visualization by atomic force microscopy demonstrated the presence of a SlpA layer on methylated silica slides displaying a surface roughness of 0.44 ± 0.02 nm. Additionally, a protein layer was visualized by fluorescence microscopy in methylated silica capillaries coated with SlpA and fluorescein isothiocyanate-labeled. The SlpA-coating showed an outstanding stability, even after treatment with 20 mM NaOH (pH 12.3). The electroosmotic flow in coated capillaries showed a partial suppression at pH 7.50 (3.8 ± 0.5 10{sup −9} m{sup 2} V{sup −1} s{sup −1}) when compared with unmodified fused silica (5.9 ± 0.1 10{sup −8} m{sup 2} V{sup −1} s{sup −1}). To demonstrate the potential of this novel coating, the SlpA-coated capillaries were applied for the first time for electrophoretic separation, and proved to be very suitable for the isotachophoretic separation of lipoproteins in human serum. The separations showed a high degree of repeatability (absolute migration times with 1.1–1.8% coefficient-of-variation (CV) within a day) and 2–3% CV inter-capillary reproducibility. The capillaries were stable for more than 100 runs at pH 9.40, and showed to be an exceptional alternative for challenging electrophoretic separations at long-term use. - Highlights: • New coating using recrystallized surface-layer proteins on

  7. Electrophoretic Focusing: An Alternative to Capillary Electrophoresis Project (United States)

    National Aeronautics and Space Administration — Electrophoretic focusing is a new separation method intended to achieve high resolution within very short sample residence times because one fraction is separated at...

  8. On-capillary sample cleanup method for the electrophoretic determination of carbohydrates in juice samples. (United States)

    Morales-Cid, Gabriel; Simonet, Bartolomé M; Cárdenas, Soledad; Valcárcel, Miguel


    On many occasions, sample treatment is a critical step in electrophoretic analysis. As an alternative to batch procedures, in this work, a new strategy is presented with a view to develop an on-capillary sample cleanup method. This strategy is based on the partial filling of the capillary with carboxylated single-walled carbon nanotube (c-SWNT). The nanoparticles retain interferences from the matrix allowing the determination and quantification of carbohydrates (viz glucose, maltose and fructose). The precision of the method for the analysis of real samples ranged from 5.3 to 6.4%. The proposed method was compared with a method based on a batch filtration of the juice sample through diatomaceous earth and further electrophoretic determination. This method was also validated in this work. The RSD for this other method ranged from 5.1 to 6%. The results obtained by both methods were statistically comparable demonstrating the accuracy of the proposed methods and their effectiveness. Electrophoretic separation of carbohydrates was achieved using 200 mM borate solution as a buffer at pH 9.5 and applying 15 kV. During separation, the capillary temperature was kept constant at 40 degrees C. For the on-capillary cleanup method, a solution containing 50 mg/L of c-SWNTs prepared in 300 mM borate solution at pH 9.5 was introduced for 60 s into the capillary just before sample introduction. For the electrophoretic analysis of samples cleaned in batch with diatomaceous earth, it is also recommended to introduce into the capillary, just before the sample, a 300 mM borate solution as it enhances the sensitivity and electrophoretic resolution.

  9. Capillary Electrophoretic Immunoassay with Laser-induced Fluorescence Detection for Interferon-gamma

    Institute of Scientific and Technical Information of China (English)

    Hua ZHANG; Hai Ming WEI; Wen Rui JIN


    Capillary electrophoretic immunoassay with laser-induced fluorescence detection for recombinant human interferon-gamma (IFN-γ) was established. The limits of detection for three forms of IFN-γare 6.9 ng/L, 5.7 ng/L and 5.0 ng/L, respectively.

  10. Electrophoretic behavior of charge regulated zwitter ionic buffers in covalently and dynamically coated fused silica capillaries

    Directory of Open Access Journals (Sweden)

    Medhat A. Al-Ghobashy


    Full Text Available In this work, the electrophoretic behavior of zwitterionic buffers is investigated in the absence of electroosmotic flow (EOF. Electro mobilization of capillary contents is noted when zwitterionic buffers are employed as the background electrolyte at a pH where the buffering moiety carries a net charge. The bulk flow of capillary contents was demonstrated via monitoring the migration of a neutral marker as well as a free and micellar negatively charged marker and SDS–protein complexes. This electrolyte-driven mobilization (EDM was investigated in detail using 4-(2-hydroxyethylpiprazine-1-ethanesulfonic acid (HEPES buffer over a wide pH range (pH 4.0–8.0. Results confirmed that at a pH where HEPES molecules carry a net negative charge, a bulk flow toward the anode is observed. This was attributed to the migration of HEPES ions toward the anode along with their hydration shells. The relatively large difference in size and solvation number between the ionic buffering moiety and its counter-migrating ions (Na+ or H+ resulted in such a net movement. Results indicated that at constant voltage, plotting the measured current versus buffer pH can be used for determination of the isoelectric point of the zwitterionic buffering moiety. Furthermore, this novel mobilization modality was demonstrated using five different HEPES analogs over pH range 5.0–8.0. More in depth investigations are required in order to explore the applicability of EDM in coated capillaries of different wall chemistries and dimensions.

  11. Effective electrophoretic mobilities and charges of anti-VEGF proteins determined by capillary zone electrophoresis. (United States)

    Li, S Kevin; Liddell, Mark R; Wen, He


    Macromolecules such as therapeutic proteins currently serve an important role in the treatment of eye diseases such as wet age-related macular degeneration and diabetic retinopathy. Particularly, bevacizumab and ranibizumab have been shown to be effective in the treatment of these diseases. Iontophoresis can be employed to enhance ocular delivery of these macromolecules, but the lack of information on the properties of these macromolecules has hindered its development. The objectives of the present study were to determine the effective electrophoretic mobilities and charges of bevacizumab, ranibizumab, and model compound polystyrene sulfonate (PSS) using capillary zone electrophoresis. Salicylate, lidocaine, and bovine serum albumin (BSA), which have known electrophoretic mobilities in the literature, were also studied to validate the present technique. The hydrodynamic radii and diffusion coefficients of BSA, bevacizumab, ranibizumab, and PSS were measured by dynamic light scattering. The effective charges were calculated using the Einstein relation between diffusion coefficient and electrophoretic mobility and the Henry equation. The results show that bevacizumab and ranibizumab have low electrophoretic mobilities and are net negatively charged in phosphate buffered saline (PBS) of pH 7.4 and 0.16M ionic strength. PSS has high negative charge but the electrophoretic mobility in PBS is lower than that expected from the polymer structure. The present study demonstrated that capillary electrophoresis could be used to characterize the mobility and charge properties of drug candidates in the development of iontophoretic drug delivery.

  12. Capillary electrophoretic study of green fluorescent hollow carbon nanoparticles. (United States)

    Liu, Lizhen; Feng, Feng; Hu, Qin; Paau, Man Chin; Liu, Yang; Chen, Zezhong; Bai, Yunfeng; Guo, Fangfang; Choi, Martin M F


    CE coupled with laser-induced fluorescence and UV absorption detections has been applied to study the complexity of as-synthesized green fluorescent hollow carbon nanoparticles (HC-NP) samples. The effects of pH, type, and concentration of the run buffer and SDS on the separation of HC-NP are studied in detail. It is observed that phosphate run buffer is more effective in separating the HC-NP and the optimal run buffer is found to be 30 mM phosphate and 10 mM SDS at pH 9.0. The CE separation of this HC-NP is based on the difference in size and electrophoretic mobility of HC-NP. Some selected HC-NP fractions are collected and further characterized by UV-visible absorption and photoluminescence (PL) spectroscopy, MS, and transmission electron microscopy. The fractionated HC-NP show profound differences in absorption, emission characteristics, and PL quantum yield that would have been otherwise misled by studying the complex mixture alone. It is anticipated that our CE methodology will open a new initiative on extensive studies of individual HC-NP species in the biomedical, catalysis, electronic, and optical device, energy storage, material, and sensing field.

  13. Ligand-substitution mode capillary electrophoretic reactor: extending capillary electrophoretic reactor toward measurement of slow dissociation kinetics with a half-life of hours. (United States)

    Iki, Nobuhiko; Takahashi, Mariko; Takahashi, Toru; Hoshino, Hitoshi


    A method employing capillary electrophoresis (CE) was developed to determine the rate constant of the very slow spontaneous dissociation of a complex species. The method uses a CE reactor (CER) to electrophoretically separate components from a complex zone and, thus, spontaneously dissociate a complex. The dissociation is accelerated by ligand substitution (LS) involving a competing ligand added to the electrophoretic buffer. The LS-CER method is validated using the dissociation of a Ti(IV)-catechin complex and EDTA as a competing ligand. There is good agreement between the spontaneous dissociation rate constant (k(d) = (1.64 +/- 0.63) x 10(-4) s(-1)) and the rate constant obtained by a conventional batchwise LS reaction (k(d) = (1.43 +/- 0.04) x 10(-4) s(-1)). Furthermore, the usefulness of the method is demonstrated using a Ti(IV)-tiron complex, for which k(d) = (0.51 +/- 0.43) x 10(-4) s(-1), corresponding to a half-life (t(1/2)) of 3.8 h. Notably, a single run of LS-CER for the Ti(IV) complex is completed within 40 min, implying that LS-CER requires a considerably shorter measurement time (roughly equal to t(1/2)) than conventional CER. LS-CER can be widely applied to determine the spontaneous dissociation rates of inorganic diagnostic and therapeutic reagents as well as of biomolecular complexes.

  14. Study on the Interaction between Strychnine and Bovine Serum Albumin by Capillary Electrophoretic Frontal Analysis

    Institute of Scientific and Technical Information of China (English)


    The protein binding constant, binding sites of the Strychnos alkaloid-strychnine and bovine serum albumin (BSA) was determined by capillary electrophoretic frontal analysis (CE-FA)for the first time. The experiment was carried out in a polyacrylamide-coated fused silica capillary (48.4 cm×50 μm i.d., 38.1 cm effective length) with 20 mmol/L citrate/MES buffer (pH 6.0, ionic strength 0.17). The applied voltage was 12 kV and detection wavelength was set at 257nm. The plateau height of the peak was employed to determine the unbound concentration of drug in BSA equilibrated sample solution based on the external drug standard in the absence of protein. The present method provides a convenient, accurate technique for the early stage of drug screening.

  15. Use of gemini surfactants as semipermanent capillary coatings in aqueous-organic solvents for capillary electrophoretic separation of inorganic anions. (United States)

    Liu, Qian; Li, Yanqing; Yao, Lihua; Yao, Shouzhuo


    This paper proposes a new method for CE separation of inorganic anions based on the use of gemini surfactants as capillary coatings in mixed aqueous-organic solvents. The semipermanent gemini surfactant coatings were facilely prepared by rinsing the capillary with 18-s-18 solutions; they can keep be stable during the electrophoretic runs without surfactants in buffer. The coatings showed a good tolerance of methanol (MeOH) or ACN, e.g. at pH 8.0 and with 40% v/v MeOH or ACN, the EOF magnitude after 60 min of continuous electrokinetic rinsing only decreased by 2.9 or 6.0%, respectively. The coatings were successfully applied to the separation of inorganic anions. Adding organic solvents in buffer can effectively improve the resolution and efficiencies; however, it remarkably prolonged the analysis time due to the suppression of EOF. Interestingly, varying the spacer length of the gemini surfactants can also modulate (improve) the resolution but without any sacrifice of analysis time. This benefit was resulted from the unique chemical structures of gemini surfactants because it introduced a new variable, i.e. the spacer length, to the separation mechanism.

  16. Correlation between Molecular Structures and Relative Electrophoretic Mobility in Capillary Electrophoresis: Alkylpyridines

    Institute of Scientific and Technical Information of China (English)

    YAO, Xiao-Jun; FAN, Bo-Tao; DOUCET, J. P.; PANAYE, A.; LIU, Man-Cang; ZHANG, Rui-Sheng; HU, Zhi-De


    The quantitative relationship between relative electrophoretic mobility in capillary electrophoresis for a series of 31 closely related alkylpyridines and their molecular structures was studied by using CODESSA. According to the t-test on the results, we found that the three most important descriptors affecting the mobility are the relative number of rings (NR), Min e-n attraction for a C-N bond (MEN) and average complementary information index (ACIC). With these structure descriptors a good three-parameter linear model was developed to correlate the mobility of these compounds with their structures. This model can not only correctly predict the migration behavior of these compounds, but also find the structural factors which are responsible for the migration behavior of these compounds,thus can help to explain the separation mechanism of these compounds. The method used in this work can also be extended to the mobility-structure relationship research of other compounds.

  17. Development of a Capillary Zone Electrophoretic Method for the Rapid Separation and Detection of Hepatotoxic Microcystins

    Energy Technology Data Exchange (ETDEWEB)

    Li, Paul C.H.; Hu, Shen; Lam, Paul K.S


    Analysis of trace amounts of various hepatotoxic microcystins in marine and freshwater samples is very important since these toxins, especially microcystin-LR, have been demonstrated to have tumour-promoting activity. In this study, instead of measuring the total amount of microcystins, we developed a capillary zone electrophoretic method for the separation and detection of individual toxin standards. No additives were used for enhancement of resolution. This technique is characterized by a high separation efficiency, short analysis time and small sample volume. In order to improve the detection sensitivity, a laser-induced fluorescence detector was used, and the labelling of microcystins was accomplished through a two-step procedure. First, the microcystin standards were converted into cysteine conjugates, followed by derivatization with Fluorescein 5-Isothiocyanate (FITC). After derivatization, the FITC-labelled microcystins were directly injected, separated and detected in 8 min. This method was shown to be a promising technique for sensitive and rapid analysis of individual microcystin toxins.

  18. Analysis of urinary drugs of abuse by a multianalyte capillary electrophoretic immunoassay. (United States)

    Caslavska, J; Allemann, D; Thormann, W


    This paper characterizes a novel multianalyte competitive binding, electrokinetic capillary-based immunoassay for urinary methadone, opiates, benzoylecgonine (cocaine metabolite) and amphetamines. After incubation of 25 microliters urine with the reactants for several minutes in the presence of an internal standard, a small aliquot of the mixture is applied onto a fused-silica capillary and the unbound fluorescein labelled drug tracers are monitored by capillary electrophoresis with on-column laser induced fluorescence detection. The multianalyte assay is shown to be rapid, simple, quantitative, capable of recognizing urinary drug concentrations > or = 30 ng/ml and suitable for screening of patient urines. Data are demonstrated to compare well with those obtained by routine screening methods based on enzyme multiplied immunoassay techniques and fluorescence polarization immunoassays. The electrokinetic capillary assay has been validated via analysis of external quality control urines and confirmation analysis of patient urines using GC-MS.

  19. Effect of surfactant species and electrophoretic medium composition on the electrophoretic behavior of neutral and water-insoluble linear synthetic polymers in nonaqueous capillary zone electrophoresis. (United States)

    Fukai, Nao; Kitagawa, Shinya; Ohtani, Hajime


    We have recently demonstrated the separation of neutral and water-insoluble linear synthetic polymers in nonaqueous capillary zone electrophoresis (NACZE) using a cationic surfactant of cetyltrimethylammonium chloride (CTAC). In this study, eight ionic surfactants were investigated for the separation of four synthetic polymers (polystyrene, polymethylmethacrylates, polybutadiene, and polycarbonate); only three surfactants (CTAC, dimethyldioctadecylammonium bromide, and sodium dodecylsulfate) caused their separation. The order of the interaction between the polymers and the surfactants depended on both the surfactant species and the composition of the electrophoretic medium. Their investigation revealed that the separation is majorly affected by the hydrophobic interactions between the polymers and the ionic surfactants. In addition, the electrophoretic behavior of polycarbonate suggested that electrostatic interaction also affects the selectivity of the polymers. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Capillary electrophoretic study of individual exocytotic events in single mast cells

    Energy Technology Data Exchange (ETDEWEB)

    Ho, Andrea Ming-Wei [Iowa State Univ., Ames, IA (United States)


    The peak profile of individual degranulation events from the on-column release of serotonin from single rat peritoneal mast cells (RPMCs) was monitored using capillary electrophoresis with laser-induced native fluorescence detection (CE-LINF). Serotonin, an important biogenic amine, is contained in granules (0.25 fL) within RPMCs and is extruded by a process termed exocytosis. The secretagogue, Polymyxin B sulfate, was used as the CE running buffer after injection of a single RPMC into the separation capillary to stimulate the release of the granules. Because the release process occurs on a ms time scale, monitoring individual exocytotic events is possible with the coupling of high-speed CE and LINF detection.



    Fitri, Noor; Thiele, Björn; Günther, Klaus; Buchari, Buchari


    A capillary electrophoretic (CE) analysis with ultra-violet (UV) detection was performed for further separation of low-molecular-mass (LMM) calcium species in phloem sap of Ricinus communis L. Two different background electrolytes (BGE) were used for the separation; these are (1) hydrogen phosphate/dihydrogen phosphate buffer containing cetyltrimethylammonium bromide (CTAB) as an electro-osmotic flow (EOF) modifier, and (2) boric acid buffer containing CTAB. Various parameters affecting the a...

  2. Increasing conclusiveness of metabonomic studies by chem-informatic preprocessing of capillary electrophoretic data on urinary nucleoside profiles. (United States)

    Szymańska, E; Markuszewski, M J; Capron, X; van Nederkassel, A-M; Heyden, Y Vander; Markuszewski, M; Krajka, K; Kaliszan, R


    Nowadays, bioinformatics offers advanced tools and procedures of data mining aimed at finding consistent patterns or systematic relationships between variables. Numerous metabolites concentrations can readily be determined in a given biological system by high-throughput analytical methods. However, such row analytical data comprise noninformative components due to many disturbances normally occurring in analysis of biological samples. To eliminate those unwanted original analytical data components advanced chemometric data preprocessing methods might be of help. Here, such methods are applied to electrophoretic nucleoside profiles in urine samples of cancer patients and healthy volunteers. The electrophoretic nucleoside profiles were obtained under following conditions: 100 mM borate, 72.5 mM phosphate, 160 mM SDS, pH 6.7; 25 kV voltage, 30 degrees C temperature; untreated fused silica capillary 70 cm effective length, 50 microm I.D. Different most advanced preprocessing tools were applied for baseline correction, denoising and alignment of electrophoretic data. That approach was compared to standard procedure of electrophoretic peak integration. The best results of preprocessing were obtained after application of the so-called correlation optimized warping (COW) to align the data. The principal component analysis (PCA) of preprocessed data provides a clearly better consistency of the nucleoside electrophoretic profiles with health status of subjects than PCA of peak areas of original data (without preprocessing).


    Directory of Open Access Journals (Sweden)

    Noor Fitri


    Full Text Available A capillary electrophoretic (CE analysis with ultra-violet (UV detection was performed for further separation of low-molecular-mass (LMM calcium species in phloem sap of Ricinus communis L. Two different background electrolytes (BGE were used for the separation; these are (1 hydrogen phosphate/dihydrogen phosphate buffer containing cetyltrimethylammonium bromide (CTAB as an electro-osmotic flow (EOF modifier, and (2 boric acid buffer containing CTAB. Various parameters affecting the analysis, including the composition and pH of the BGE were systematically studied. The sensitivity, resolution, baseline noise, migration time of the species peaks, and reproducibility of the method were evaluated under optimised condition. At least 13 UV-active species were optimally separated within about ten minutes. The optimised measurement condition was also achieved using 10 mM hydrogen phosphate/10 mM dihydrogen phosphate containing 0.5 mM CTAB at pH 8.0 as BGE, and by applying voltage of ‑20 kV and temperature of 14°C. Evidently, the analytical method was successfully used for the separation of LMM calcium species in phloem sap of R. communis L.   Keywords: capillary electrophoresis, calcium species, phloem sap, Ricinus communis

  4. Electrophoretic analysis of biomarkers using capillary modification with gold nanoparticles embedded in a polycation and boron doped diamond electrode. (United States)

    Zhou, Lin; Glennon, Jeremy D; Luong, John H T


    Field-amplified sample stacking using a fused silica capillary coated with gold nanoparticles (AuNPs) embedded in poly(diallyl dimethylammonium) chloride (PDDA) has been investigated for the electrophoretic separation of indoxyl sulfate, homovanillic acid (HVA), and vanillylmandelic acid (VMA). AuNPs (27 nm) exhibit ionic and hydrophobic interactions, as well as hydrogen bonding with the PDDA network to form a stable layer on the internal wall of the capillary. This approach reverses electro-osmotic flow allowing for fast migration of the analytes while retarding other endogenous compounds including ascorbic acid, uric acid, catecholamines, and indoleamines. Notably, the two closely related biomarkers of clinical significance, HVA and VMA, displayed differential interaction with PDDA-AuNPs which enabled the separation of this pair. The detection limit of the three analytes obtained by using a boron doped diamond electrode was approximately 75 nM, which was significantly below their normal physiological levels in biological fluids. This combined separation and detection scheme was applied to the direct analysis of these analytes and other interfering chemicals including uric and ascorbic acids in urine samples without off-line sample treatment or preconcentration.

  5. Capillary electrophoretic determination of main components of natural dyes with MS detection. (United States)

    Surowiec, Izabella; Pawelec, Katarzyna; Rezeli, Melinda; Kilar, Ferenc; Trojanowicz, Marek


    CE with UV-Vis and MS detections was investigated as a technique for detection of main components of selected natural dyes of plant and insect origin. The BGE giving the best separation of the investigated flavonoids and anthraquinoids, suitable for MS detection consisted of 40 mM ammonium acetate solution of pH 9.5 with 40% ACN. LODs obtained with MS detection were even one order of magnitude lower than the ones obtained with UV-Vis detection. Application of MS detection enabled determination of eleven dye compounds from three different chemical groups in 15 min. and proved to be more satisfactory than diode-array detection in the electrophoretic analysis of main classes of natural dyes both in terms of selectivity and sensitivity of analysis.

  6. Screening for urinary amphetamine and analogs by capillary electrophoretic immunoassays and confirmation by capillary electrophoresis with on-column multiwavelength absorbance detection. (United States)

    Ramseier, A; Caslavska, J; Thormann, W


    This paper characterizes competitive binding, electrokinetic capillary-based immunoassays for screening of urinary amphetamine (A) and analogs using reagents which were commercialized for a fluorescence polarization immunoassay (FPIA). After incubation of 25 microL urine with the reactants, a small aliquot of the mixture is applied onto a fused-silica capillary and unbound fluorescein-labeled tracer compounds are monitored by capillary electrophoresis with on-column laser-induced fluorescence detection. Configurations in presence and absence of micelles were investigated and found to be capable of recognizing urinary D-(+)-amphetamine at concentrations > about 80 ng/mL. Similar responses were obtained for racemic methamphetamine (MA) and 3,4-methylenedioxymethamphetamine (MDMA). The electrokinetic immunoassay data suggest that the FPIA reagent kit includes two immunoassay systems (two antibodies and two tracer molecules), one that recognizes MA and MDMA, and one that is geared towards monitoring of A. For confirmation analysis of urinary amphetamines and ephedrines, capillary electrophoresis in a pH 9.2 buffer and multiwavelength UV detection was employed. The suitability of the electrokinetic methods for screening and confirmation is demonstrated via analysis of patient and external quality control urines.

  7. Inter-instrumental method transfer of chiral capillary electrophoretic methods using robustness test information. (United States)

    De Cock, Bart; Borsuk, Agnieszka; Dejaegher, Bieke; Stiens, Johan; Mangelings, Debby; Vander Heyden, Yvan


    Capillary electrophoresis (CE) is an electrodriven separation technique that is often used for the separation of chiral molecules. Advantages of CE are its flexibility, low cost and efficiency. On the other hand, the precision and transfer of CE methods are well-known problems of the technique. Reasons for the more complicated method transfer are the more diverse instrumental differences, such as total capillary lengths and capillary cooling systems; and the higher response variability of CE methods compared to other techniques, such as liquid chromatography (HPLC). Therefore, a larger systematic change in peak resolutions, migration times and peak areas, with a loss of separation and efficiency may be seen when a CE method is transferred to another laboratory or another type of instrument. A swift and successful method transfer is required because development and routine use of analytical methods are usually not performed in the same laboratory and/or on the same type of equipment. The aim of our study was to develop transfer rules to facilitate CE method transfers between different laboratories and instruments. In our case study, three β-blockers were chirally separated and inter-instrumental transfers were performed. The first step of our study was to optimise the precision of the chiral CE method. Next, a robustness test was performed to identify the instrumental and experimental parameters that were most influencing the considered responses. The precision- and the robustness study results were used to adapt instrumental and/or method settings to improve the transfer between different instruments. Finally, the comparison of adapted and non-adapted transfers allowed deriving some rules to facilitate CE method transfers.

  8. Characterization of Dickeya and Pectobacterium species by capillary electrophoretic techniques and MALDI-TOF MS. (United States)

    Šalplachta, Jiří; Kubesová, Anna; Horký, Jaroslav; Matoušková, Hana; Tesařová, Marie; Horká, Marie


    Dickeya and Pectobacterium species represent an important group of broad-host-range phytopathogens responsible for blackleg and soft rot diseases on numerous plants including many economically important plants. Although these species are commonly detected using cultural, serological, and molecular methods, these methods are sometimes insufficient to classify the bacteria correctly. On that account, this study was undertaken to investigate the feasibility of three individual analytical techniques, capillary zone electrophoresis (CZE), capillary isoelectric focusing (CIEF), and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS), for reliable classification of Dickeya and Pectobacterium species. Forty-three strains, representing different Dickeya and Pectobacterium species, namely Dickeya dianthicola, Dickeya dadantii, Dickeya dieffenbachiae, Dickeya chrysanthemi, Dickeya zeae, Dickeya paradisiaca, Dickeya solani, Pectobacterium carotovorum, and Pectobacterium atrosepticum, were selected for this purpose. Furthermore, the selected bacteria included one strain which could not be classified using traditional microbiological methods. Characterization of the bacteria was based on different pI values (CIEF), migration velocities (CZE), or specific mass fingerprints (MALDI-TOF MS) of intact cells. All the examined strains, including the undetermined bacterium, were characterized and classified correctly into respective species. MALDI-TOF MS provided the most reliable results in this respect.

  9. Synthesis, analytical characterization and capillary electrophoretic use of the single-isomer heptakis-(6-O-sulfobutyl)-beta-cyclodextrin. (United States)

    Malanga, Milo; Fejős, Ida; Varga, Erzsébet; Benkovics, Gábor; Darcsi, András; Szemán, Julianna; Béni, Szabolcs


    This contribution reports the synthesis, characterization and capillary electrophoretic application of heptakis-(6-O-sulfobutyl-ether)-β-cyclodextrin sodium salt, (6-(SB)7-β-CD). The compound was obtained through a five-steps synthesis and it represents the first example of single-isomer sulfobutylated cyclodextrin that carries the negatively charged functions exclusively on its primary side and it is unmodified on the lower rim. The purity of each intermediate was determined by appropriate liquid chromatographic methods, while the isomeric purity of the final product was established by an ad-hoc developed HPLC method based on a CD-Screen-IEC column. The structural identification of 6-(SB)7-β-CD was carried out by 1D, 2D NMR spectroscopy and ESI-MS. The chiral separation ability of 6-(SB)7-β-CD was studied by chiral capillary electrophoresis using the single-isomer host as a background electrolyte additive to separate the enantiomers of a representative set of pharmacologically significant model compounds such as verapamil, dapoxetine, ondansetron, propranolol, atenolol, metoprolol, carvedilol, terbutaline, amlodipine and tadalafil. The enantiomer migration order and the effects of the selector concentration on the enantiorecognition properties were investigated. NMR spectroscopy was applied to deepen and further confirm the host-guest interactions and in the case of the model compound dapoxetine a potential representation for the supramolecular assembly was developed based on the dataset collected by the extensive 2D NMR analysis. This single-isomer chiral selector offers a new alternative to the widely applied randomly sulfobutylated- and sulfated-beta-cylodextrins as well as to the single-isomer sulfated and carboxymethylated derivatives in chiral separations. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. Capillary electrophoretic analysis of flavonoids in single-styled hawthorn (Crataegus monogyna Jacq.) ethanolic extracts. (United States)

    Urbonaviciūte, A; Jakstas, V; Kornysova, O; Janulis, V; Maruska, A


    Flavonoids are an important group of natural compounds, which can prevent coronary heart disease and have antioxidant properties. Hawthorn is a well known and widely used medicinal plant due to its cardiotonic activity. Previous studies refer mostly to the HPLC analysis of the flavonoids: vitexin, quercetin, hyperoside, oligomeric procyanidins, which appear to be primarily responsible for the cardiac action of the plant. Aqueous ethanolic extracts of single-styled hawthorn (Crataegus monogyna Jacq., f.: Rosaceae Juss.) leaves and sprouts were analyzed by means of capillary zone electrophoresis (CZE). Influence of vegetation period on the extract qualitative composition and flavonoids quantities was evaluated. Sample preparation by extraction using different concentration of aqueous ethanol (40-96%, v/v) and the influence of extractant composition on the recovery of flavonoids are discussed in detail. The results obtained using CZE are compared to the results of spectrophotometric and HPLC analysis of the extracts. The effect of storage conditions of extracts (solar irradiation, temperature and duration) on degradation of flavonoids was investigated.

  11. Study of nucleic acid-ligand interactions by capillary electrophoretic techniques: A review. (United States)

    Neaga, I O; Bodoki, E; Hambye, S; Blankert, B; Oprean, R


    The understanding of nucleic acids-ligand (proteins, nucleic acids or various xenobiotics) interactions is of fundamental value, representing the basis of complex mechanisms that govern life. The development of improved therapeutic strategies, as well as the much expected breakthroughs in case of currently untreatable diseases often relies on the elucidation of such biomolecular interactions. Capillary electrophoresis (CE) is becoming an indispensable analytical tool in this field of study due to its high versatility, ease of method development, high separation efficiency, but most importantly due to its low sample and buffer volume requirements. Most often the availability of the compounds of interest is severely limited either by the complexity of the purification procedures or by the cost of their synthesis. Several reviews covering the investigation of protein-protein and protein-xenobiotics interactions by CE have been published in the recent literature; however none of them promotes the use of these techniques in the study of nucleic acid interactions. Therefore, various CE techniques applicable for such interaction studies are discussed in detail in the present review. The paper points out the particular features of these techniques with respect the estimation of the binding parameters, in analytical signal acquisition and data processing, as well as their current shortcomings and limitations.

  12. Rational use of stacking principles for signal enhancement in capillary electrophoretic separations of poliovirus samples. (United States)

    Oita, Iuliana; Halewyck, Hadewych; Pieters, Sigrid; Dejaegher, Bieke; Thys, Bert; Rombaut, Bart; Vander Heyden, Yvan


    The use of an earlier developed capillary electrophoresis (CE) method, either to investigate poliovirus (PV) samples with a low viral-purity level or to study the less abundant sub-viral particles, revealed the necessity for an intra-column signal enhancement strategy. Although intra-column signal enhancement is a very popular approach to assay small molecules, it is less straightforward for the analysis of biological macromolecules or particles. A reason could be that, for a proper signal enhancement approach, these samples have to be thoroughly studied to understand the factors affecting the separation process. For the investigated PV samples, a screening design revealed that injecting larger sample plugs significantly enhanced the analytical signal, but also significantly decreased the separation efficiency. A subsequently executed central composite design determined the largest sample plug that can be injected without compromising the separation. Finally, the sample dilution and the length of the injected plug were used for tuning the intensity of the analytical response. Two combinations of sample dilution and injected plug size, at extreme values, were investigated in detail to define the best procedure for PV analysis using CE. In both situations, PV was effectively separated and quantified in rather complex samples, showing a good repeatability, an acceptable linearity for the PV particles and a decreased limit of detection in comparison with the existing method. In conclusion, intra-column signal enhancement can be successfully applied for viral suspensions, extending the applicability of CE methods to samples with lower virus concentrations, and/or allowing a significant reduction in the minimum required volume of sample. For PV samples, 5μl of sample is necessary instead of the previous 20μl, while the analytical signal was enhanced up to 14 times. The results of this study can provide a basis for the development of routine CE methods for viral

  13. Capillary electrophoretic study of the synergistic biological effects of alkaloids from Chelidonium majus L. in normal and cancer cells. (United States)

    Kulp, Maria; Bragina, Olga


    In this study, the synergistic biological action of five celandine alkaloids in normal and cancer cells was investigated by capillary electrophoresis with light-emitting diode-induced native fluorescence detection. The specific capacity of each alkaloid to penetrate into the cells was estimated by monitoring alkaloid concentration decreases in the cell medium during incubation with murine fibroblast NIH/3T3, mouse melanoma B16F10, and human breast cancer MCF7 cell lines. Mixtures of isoquinoline alkaloids containing protopine, chelidonine, sanguinarine, allocryptopine, and stylopine were applied to cell cultures for 20 and 40 min, and the content of alkaloids in the cell media was measured by capillary electrophoresis (CE). CE separation of isoquinoline alkaloids was performed in 30 mM phosphate buffer (pH 2.5). As these alkaloids have native fluorescence, they were directly detected using the commercially available UV light-emitting diode without troublesome fluorescent derivatization. The results showed a differential ability of celandine alkaloids to penetrate into the normal and cancer cell interior, which was inversely proportional to their cytotoxic activity. While the most effective transport of celandine alkaloids from the cell medium to the cell interior was observed for normal murine fibroblast NIH/3T3 cells (about 55% of total content), cytotoxicity tests demonstrated selective and profound apoptotic effects of a five-alkaloid combination in the mouse melanoma B16F10 cell line.

  14. Capillary electrophoresis, gas-phase electrophoretic mobility molecular analysis, and electron microscopy: effective tools for quality assessment and basic rhinovirus research. (United States)

    Weiss, Victor U; Subirats, Xavier; Kumar, Mohit; Harutyunyan, Shushan; Gösler, Irene; Kowalski, Heinrich; Blaas, Dieter


    We describe standard methods for propagation, purification, quality control, and physicochemical characterization of human rhinoviruses, using HRV-A2 as an example. Virus is propagated in HeLa-OHIO cells grown in suspension culture and purified via sucrose density gradient centrifugation. Purity and homogeneity of the preparations are assessed with SDS-polyacrylamide gel electrophoresis (SDS-PAGE), capillary electrophoresis (CE), gas-phase electrophoretic mobility molecular analysis (GEMMA), and electron microscopy (EM). We also briefly describe usage of these methods for the characterization of subviral particles as well as for the analysis of their complexes with antibodies and soluble recombinant receptor mimics.

  15. Capillary electrophoretic separation of humic substances using hydroxyethyl cellulose as a buffer additive and its application to characterization of humic substances in a river water sample. (United States)

    Takahashi, Toru; Kawana, Jun; Hoshino, Hitoshi


    We have developed a concise tool for the investigation of the transition of humic substances in environmental water. The separation of water-soluble humic substances was achieved rapidly and effectively by capillary electrophoresis using a polyacrylamide-coated capillary and a phosphate electrophoretic buffer solution (pH 7.0) containing hydroxyethyl cellulose. The separation mechanism was assessed using the ultrafiltration technique. The effect of the complexation of humic substances with metal ions was studied by using the proposed method. When Fe(III) ions or EDTA was added to the sample solution of fulvic acid, a distinct change in the electropherogram pattern based on the conformational change of fulvic acid was observed. The successful application of the proposed method to the characterization of humic substances in a river water sample was also demonstrated.

  16. ESI-MS compatible permanent coating of glass surfaces using poly(ethylene glycol)-terminated alkoxysilanes for capillary zone electrophoretic protein separations. (United States)

    Razunguzwa, Trust T; Warrier, Manoj; Timperman, Aaron T


    Thin poly(ethylene glycol) silane (PEG-silane) coatings formed from N-(triethoxysilyl propyl)-O-poly(ethylene oxide) urethane with different chain lengths of poly(ethylene glycol) (MW 750 and 4000-5000) are used to modify glass microfluidic channels and fused-silica capillaries for electrophoretic separations of proteins. These coatings combine three important properties, which make them favorable for proteomic analyses including reduction of protein adsorption, compatibility with mass spectrometry due to their stability, and the ability to control the magnitude of electroosmotic flow (EOF). The coatings have been successfully used in microfluidic chips and fused-silica capillaries for separation of protein sample mixtures under low EOF conditions. The long-chain and mixed PEG-silane coatings suppress electroosmotic flow by more than 90%, whereas the short-chain PEG silane suppresses EOF by 65-75% at pH values of 3-9. The long-chain and mixed PEG-silane coatings are suitable for low EOF applications or for cases where negative effects of EOF are to be minimized. Efficient separations of unlabeled basic proteins at low pH and FITC-labeled proteins at high pH were achieved, as well as excellent stability for at least 200 electrophoretic runs. Additionally, these covalent coatings produce no detectable background ions in ESI-MS, making them compatible with on-line mass spectrometry.

  17. Characterization of rhinovirus subviral A particles via capillary electrophoresis, electron microscopy and gas-phase electrophoretic mobility molecular analysis: Part I. (United States)

    Weiss, Victor U; Subirats, Xavier; Pickl-Herk, Angela; Bilek, Gerhard; Winkler, Wolfgang; Kumar, Mohit; Allmaier, Günter; Blaas, Dieter; Kenndler, Ernst


    During infection, enteroviruses, such as human rhinoviruses (HRVs), convert from the native, infective form with a sedimentation coefficient of 150S to empty subviral particles sedimenting at 80S (B particles). B particles lack viral capsid protein 4 (VP4) and the single-stranded RNA genome. On the way to this end stage, a metastable intermediate particle is observed in the cell early after infection. This subviral A particle still contains the RNA but lacks VP4 and sediments at 135S. Native (150S) HRV serotype 2 (HRV2) as well as its empty (80S) capsid have been well characterized by capillary electrophoresis. In the present paper, we demonstrate separation of at least two forms of subviral A particles on the midway between native virions and empty 80S capsids by CE. For one of these intermediates, we established a reproducible way for its preparation and characterized this particle in terms of its electrophoretic mobility and its appearance in transmission electron microscopy (TEM). Furthermore, the conversion of this intermediate to 80S particles was investigated. Gas-phase electrophoretic mobility molecular analysis (GEMMA) yielded additional insights into sample composition. More data on particle characterization including its protein composition and RNA content (for unambiguous identification of the detected intermediate as subviral A particle) will be presented in the second part of the publication.

  18. Monitoring of alcohol markers by capillary electrophoresis. (United States)

    Caslavska, Jitka; Thormann, Wolfgang


    Work dealing with the monitoring of alcohol markers by CE performed during the past two decades led to the development of assays for carbohydrate-deficient transferrin (CDT), ethyl sulfate, ethyl glucuronide, and phosphatidylethanol in body fluids and first attempts for the detection of the urinary 5-hydroxytryptophol/5-hydroxyindoleacetic acid ratio and stable hemoglobin acetaldehyde adducts. Most notably are assays for CDT that have been commercialized and are being used in many laboratories under routine conditions. This paper provides insight into the development, specifications, and use of the currently known CE-based assays suitable to detect alcohol markers. The achievements reached so far indicate that CE is an attractive technology for monitoring alcohol markers. This is particularly seen with the CDT assays that do not require an elaborate sample pretreatment and thus could be fully automated for high-throughput analyses on multicapillary instruments.

  19. Electrophoretic and zymographic techniques for production monitoring of two lipase forms from Candida antarctica DSM 70725

    Directory of Open Access Journals (Sweden)

    Dimitrijević Aleksandra S.


    Full Text Available Yeast Candida antarctica produces two lipase forms, which are widely used as catalysts in variety of organic reactions, many of which are applied on a large scale. In this work, production of two forms of lipase from C. antarctica DSM 70725 (CAL A and CAL B was monitored during seven days of cultivation in the optimal medium using different electrophoretic and zymographic techniques. According to electrophoresis after silver staining, C. antarctica lipase A (molecular mass 45 kDa was produced starting from the second day of cultivation. C. antarctica lipase B (CAL B was also produced starting from the second day, but protein was present in the fermentation broth predominantly as dimer (molecular weight 66 kDa, while presence of monomeric form of CAL B (molecular weight of 33 kDa was observed starting from the fourth day of cultivation. Both types of zymograms (based on hydrolysis and synthesis reactions were used for detection of lipase activity in the fermentation broth. C. antarctica lipase A showed activity only in hydrolytic zymogram, when α-naphtyl butyrate was used as substrate. In the same zymogram, with α-naphtyl acetate as substrate no CAL A activity was detected. Similarly, CAL A showed no activity in synthesis based zymograms towards oleic acid and octanol as substrates, indicating that CAL A is not active towards very short or long-chain substrates. As opposite of CAL A, both monomeric and dimeric form of CAL B were detected in the all zymograms, suggesting that CAL B is active towards wide range of substrates, regardless to the chain length. Thus, zymogram based on hydrolysis of α-naphtyl butyrate represents a simple method for monitoring the production of two forms of lipase from C. antarctica, that greatly differ in their characteristics.

  20. Classification of Spanish white wines using their electrophoretic profiles obtained by capillary zone electrophoresis with amperometric detection. (United States)

    Arribas, Alberto Sánchez; Martínez-Fernández, Marta; Moreno, Mónica; Bermejo, Esperanza; Zapardiel, Antonio; Chicharro, Manuel


    A method was developed for the simultaneous detection of eight polyphenols (t-resveratrol, (+)-catechin, quercetin and p-coumaric, caffeic, sinapic, ferulic, and gallic acids) by CZE with electrochemical detection. Separation of these polyphenols was achieved within 25 min using a 200 mM borate buffer (pH 9.4) containing 10% methanol as separation electrolyte. Amperometric detection of polyphenols was carried out with a glassy carbon electrode (GCE) modified with a multiwalled carbon nanotubes (CNT) layer obtained from a dispersion of CNT in polyethylenimine. The excellent electrochemical properties of this modified electrode allowed the detection and quantification of the selected polyphenols in white wines without any pretreatment step, showing remarkable signal stability despite the presence of potential fouling substances in wine. The electrophoretic profiles of white wines, obtained using this methodology, have proven to be useful for the classification of these wines by means of chemometric multivariate techniques. Principal component analysis and discriminant analysis allowed accurate classification of wine samples on the basis of their grape varietal (verdejo and airén) using the information contained in selected zones of the electropherogram. The utility of the proposed CZE methodology based on the electrochemical response of CNT-modified electrodes appears to be promising in the field of wine industry and it is expected to be successfully extended to classification of a wider range of wines made of other grape varietals. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Capillary electrophoretic methods in the development of metal-based therapeutics and diagnostics: new methodology and applications. (United States)

    Bytzek, Anna K; Hartinger, Christian G


    In recent years, capillary electrophoresis (CE) has matured to a standard method in medicinal inorganic chemistry. More and more steps of the drug discovery process are followed by CE. However, not only the number of applications has steadily increased but also the variety of used methodology has significantly broadened and, as compared to a few years ago, a wider scope of separation modes and hyphenated systems has been used. Herein, a summary of the newly utilized CE methods and their applications in metallodrug research in the timeframe 2006-2011 is presented, following related reviews from 2003 and 2007 (Electrophoresis, 2003, 24, 2023-2037; Electrophoresis 2007, 28, 3436-3446). Areas covered include impurity profiling, quality control of pharmaceutical formulations, lipophilicity estimation, interactions between metallodrugs and proteins or nucleotides, and characterization and also quantification of metabolites in biological matrices and real-world samples.

  2. Characterization of rhinovirus subviral A particles via capillary electrophoresis, electron microscopy and gas phase electrophoretic mobility molecular analysis: part II. (United States)

    Subirats, Xavier; Weiss, Victor U; Gösler, Irene; Puls, Christoph; Limbeck, Andreas; Allmaier, Günter; Kenndler, Ernst


    Human rhinoviruses (HRVs) are valuable tools in the investigation of early viral infection steps due to their far reaching (although still incomplete) characterization. During endocytosis, native virions first loose one of the four capsid proteins (VP4); corresponding particles sediment at 135S and were termed subviral A particles. Subsequently, the viral RNA genome leaves the viral shell giving rise to empty capsids. In continuation of our previous work with HRV serotype 2 (HRV2) intermediate subviral particles, in which we were able to discriminate by CE even between two intermediates (AI and AII) of virus uncoating, we further concentrated on the characterization of AI particles with the electrophoretic mobility of around -17.2 × 10(-9) m(2) /Vs at 20°C. In the course of our present work we related these particles to virions as previously described at the subviral A stage of uncoating (and as such sedimenting at 135S) by determination of their protein and RNA content--in comparison to native virions AI particles did not include VP4, however, still 93% of their initial RNA content. Binding of an mAb specific for subviral particles demonstrated antigenic rearrangements on the capsid surface at the AI stage. Furthermore, we investigated possible factors stabilizing intermediates of virus uncoating. We could exclude the influence of the previously suspected so-called contaminant of virus preparation on HRV2 subviral particle formation. Instead, we regarded other factors being part of the virus preparation system and found a dependence of AI particle formation on the presence of divalent cations.

  3. Use of beta-cyclodextrin in the capillary zone electrophoretic separation of the components of clandestine heroin preparations. (United States)

    Macchia, M; Manetto, G; Mori, C; Papi, C; Di Pietro, N; Salotti, V; Bortolotti, F; Tagliaro, F


    The present paper describes the methodological optimization and validation of a capillary zone electrophoresis method for the rapid determination of heroin, secondary products and additives present in clandestine heroin samples, by using 20 mM beta-cyclodextrins in phosphate buffer, pH 3.23. Applied potential was 15 kV and separation temperature was 24 degrees C; detection was by UV absorption at 200 nm wavelength. Heroin samples were first dissolved in CHCl3-MeOH (96:4, v/v) and injected by pressure (0.5 p.s.i., 3 s; 1 p.s.i.=6894.76 Pa) after evaporation of the organic mixture and reconstitution in aqueous buffer. Under the described conditions, phenylethylamine (internal standard), morphine, monoacetylmorphine, heroin, acetylcodeine, papaverine, codeine and narcotine were baseline resolved in less than 10 min. The limit of detection was better than 1 microg/ml for each analyte. The study of the intra-day and day-to-day precision showed, in terms of migration times, RSDs < or = 0.71% and, in terms of peak areas, RSDs < or = 3.2%. Also, the evaluation of linearity and analytical accuracy of the method provided good results for all the analytes investigated, thus allowing its application to real cases of seized controlled drug preparations.

  4. Toward high-throughput monitoring of metallodrug-protein interaction using capillary electrophoresis in chemically modified capillaries. (United States)

    Shmykov, Alexei Y; Filippov, Vladimir N; Foteeva, Lidia S; Keppler, Bernhard K; Timerbaev, Andrei R


    The performance of capillary electrophoresis (CE) operating with a sulfonated capillary for the separation of protein adducts of anticancer ruthenium(III)-based drugs was evaluated. The coated capillary was shown to yield improved resolution of albumin- and transferrin-bound species of ruthenium compared with that attained with the bare fused-silica capillary. The coating also showed an increased reproducibility of migration times and peak areas and allowed reasonably high efficiency separation of analytes (up to 1300 theoretical plates per meter), which display high affinity toward a fused-silica surface. In addition, due to rather high electroosmotic flow (EOF, > 45 x 10(-5)cm(2)V(-1)s(-1)) in the coated capillary, it enabled fast counter-EOF monitoring of albumin and transferrin adducts. This benefit, together with requiring only a short flush with the background electrolyte to have migration times reproducible (at capillary holding promise for CE examination of fast reactions such as those accompanying protein-drug interactions and biotransformations associated with drug delivery via protein binding.

  5. Evaluation of the Capillary Blood Glucose Self-monitoring Program (United States)

    Augusto, Mariana Cristina; Nitsche, Maria José Trevizani; Parada, Cristina Maria Garcia de Lima; Zanetti, Maria Lúcia; Carvalhaes, Maria Antonieta de Barros Leite


    OBJECTIVE: to evaluate the structure, process and results of the Capillary Blood Glucose Self-monitoring Program in a Brazilian city. METHOD: epidemiological, cross-sectional study. The methodological framework of Donabedian was used to construct indicators of structure, process and outcome. A random sample (n = 288) of users enrolled and 96 health professionals who worked in the program was studied. Two questionnaires were used that were constructed for this study, one for professionals and one for users, both containing data for the evaluation of structure, process and outcome. Anthropometric measures and laboratory results were collected by consulting the patients' health records. The analysis involved descriptive statistics. RESULTS: most of the professionals were not qualified to work in the program and were not knowledgeable about the set of criteria for patient registration. None of the patients received complete and correct orientations about the program and the percentage with skills to perform conducts autonomously was 10%. As regards the result indicators, 86.4% of the patients and 81.3% of the professionals evaluated the program positively. CONCLUSION: the evaluation indicators designed revealed that one of the main objectives of the program, self-care skills, has not been achieved. PMID:25493676

  6. Evaluation of the Capillary Blood Glucose Self-monitoring Program

    Directory of Open Access Journals (Sweden)

    Mariana Cristina Augusto


    Full Text Available OBJECTIVE: to evaluate the structure, process and results of the Capillary Blood Glucose Self-monitoring Program in a Brazilian city.METHOD: epidemiological, cross-sectional study. The methodological framework of Donabedian was used to construct indicators of structure, process and outcome. A random sample (n = 288 of users enrolled and 96 health professionals who worked in the program was studied. Two questionnaires were used that were constructed for this study, one for professionals and one for users, both containing data for the evaluation of structure, process and outcome. Anthropometric measures and laboratory results were collected by consulting the patients' health records. The analysis involved descriptive statistics.RESULTS: most of the professionals were not qualified to work in the program and were not knowledgeable about the set of criteria for patient registration. None of the patients received complete and correct orientations about the program and the percentage with skills to perform conducts autonomously was 10%. As regards the result indicators, 86.4% of the patients and 81.3% of the professionals evaluated the program positively.CONCLUSION: the evaluation indicators designed revealed that one of the main objectives of the program, self-care skills, has not been achieved.

  7. Monitoring of enzymatic reactions using capillary electrophoresis with conductivity detection



    Capillary electrophoresis combined with contactless conductivity detection allows to separate and detect the ionic species, which are neither UV absorbing nor fluorescent. This thesis focuses on the applications of this method on enzymatic reactions in different analytical tasks. First, the non-ionic species ethanol, glucose, ethyl acetate and ethyl butyrate were made accessible for analysis by capillary electrophoresis via charged products or byproducts obtained in enzymati...

  8. Estratégias de pré-concentração em eletroforese capilar (CE: parte 1. Manipulação da velocidade eletroforética do analito Preconcentration strategies in capillary electrophoresis (CE: part 1. Manipulation of the analyte electrophoretic velocity

    Directory of Open Access Journals (Sweden)

    Maria de Lourdes Leite de Moraes


    Full Text Available Capillary electrophoresis has become a well-established and routine-based separation technique. It is based on the differences between charged analyte mobility in aqueous or organic electrolytes. Its major limitation is the sensitivity due to small sample injection volumes and the narrow diameter of the capillaries, especially when UV detection is used. There are a number of ways to increase the concentration sensitivity. This report shows some on-line preconcentration strategies to perform it in free solution capillary electrophoresis that are based on manipulation of the analyte electrophoretic velocity during the sample introduction (stacking, field amplification and transient isotachophoresis.

  9. Effect of Joule heating on efficiency and performance for microchip-based and capillary-based electrophoretic separation systems: a closer look. (United States)

    Petersen, Nickolaj J; Nikolajsen, Rikke P H; Mogensen, Klaus B; Kutter, Jörg P


    An attempt is made to revisit the main theoretical considerations concerning temperature effects ("Joule heating") in electro-driven separation systems, in particular lab-on-a-chip systems. Measurements of efficiencies in microfabricated devices under different Joule heating conditions are evaluated and compared to both theoretical models and measurements performed on conventional capillary systems. The widely accepted notion that planar microdevices are less susceptible to Joule heating effects is largely confirmed. The heat dissipation from a nonthermostatically controlled glass microdevice was found to be comparable to that from a liquid-cooled-fused silica capillary. Using typically dimensioned glass and glass/silicon microdevices, the experimental results indicate that 5-10 times higher electric field strengths can be applied than on conventional capillaries, before detrimental effects on the separation efficiency occur. The main influence of Joule heating on efficiency is via the establishment of a radial temperature profile across the lumen of the capillary or channel. An overall temperature increase of the buffer solution has only little influence on the quality of the separation. Still, active temperature control (cooling, thermostatting) can help prevent boiling of the buffer and increase the reproducibility of the results.

  10. Graphene/poly(ethylene-co-vinyl acetate) composite electrode fabricated by melt compounding for capillary electrophoretic determination of flavones in Cacumen platycladi. (United States)

    Sheng, Shijun; Liu, Shuang; Zhang, Luyan; Chen, Gang


    In this report, a graphene/poly(ethylene-co-vinyl acetate) composite electrode was fabricated by melt compounding for the amperometric detection of capillary electrophoresis. The composite electrode was fabricated by packing a mixture of graphene and melted poly(ethylene-co-vinyl acetate) in a piece of fused silica capillary under heat. The structure of the composite was investigated by scanning electron microscopy and Fourier transform infrared spectroscopy. The results indicated that graphene sheets were well dispersed in the composite to form an interconnected conducting network. The performance of this unique graphene-based detector has been demonstrated by separating and detecting rutin, quercitrin, kaempferol, and quercetin in Cacumen platycladi in combination with capillary electrophoresis. The four flavones have been well separated within 9 min in a 50-cm-long capillary at a separation voltage of 12 kV using a 50 mM sodium borate buffer (pH 9.2). The graphene-based detector offered significantly lower operating potentials, substantially enhanced signal-to-noise characteristics, lower expense of operation, high resistance to surface fouling, and enhanced stability. It showed long-term stability and repeatability with relative standard deviations of <5% for the peak current (n = 15).

  11. Water management in capillary gas chromatographic air monitoring systems

    Energy Technology Data Exchange (ETDEWEB)

    Tipler, A. [Perkin Elmer Corp., Norwalk, CT (United States). Fresh Aire Lab.


    Capillary gas chromatography is an excellent technique for the speciated quantitation of low-level volatile organic compounds (VOCs) in ambient air. Although GC detectors have excellent sensitivity, some sample pre-concentration will be necessary to enable detection of VOCs at sub-ppb levels. This process normally employs a cooled and/or adsorbent trap to retain the analytes from a large volume of sample air. For very volatile VOCs, a very retentive trap is used and this may also retain water present as vapor in the sample. This trapped water causes significant problems with the chromatography and detector operation and methods must be sought to remove it or eliminate its effects. This paper investigates the magnitude of the problem and examines the various alternatives for managing the trapped water. The application of some of these techniques is demonstrated in a method for the determination of volatile polar and non-polar toxic organic compounds in ambient air.

  12. Development and validation of a stability-indicating capillary zone electrophoretic method for the assessment of entecavir and its correlation with liquid chromatographic methods. (United States)

    Dalmora, Sergio Luiz; Nogueira, Daniele Rubert; D'Avila, Felipe Bianchini; Souto, Ricardo Bizogne; Leal, Diogo Paim


    A stability-indicating capillary zone electrophoresis (CZE) method was validated for the analysis of entecavir in pharmaceutical formulations, using nimesulide as an internal standard. A fused-silica capillary (50 µm i.d.; effective length, 40 cm) was used while being maintained at 25°C; the applied voltage was 25 kV. A background electrolyte solution consisted of a 20 mM sodium tetraborate solution at pH 10. Injections were performed using a pressure mode at 50 mbar for 5 s, with detection at 216 nm. The specificity and stability-indicating capability were proven through forced degradation studies, evaluating also the in vitro cytotoxicity test of the degraded products. The method was linear over the concentration range of 1-200 µg mL(-1) (r(2) = 0.9999), and was applied for the analysis of entecavir in tablet dosage forms. The results were correlated to those of validated conventional and fast LC methods, showing non-significant differences (p > 0.05).

  13. The sensitive capillary electrophoretic-LIF method for simultaneous determination of curcuminoids in turmeric by enhancing fluorescence intensities of molecules upon inclusion into (2-hydroxypropyl)-β-cyclodextrin. (United States)

    Kalaycıoğlu, Zeynep; Hashemi, Parya; Günaydın, Keriman; Erim, F Bedia


    Curcuminoids have received great attention in the past decades due to their health benefit properties. The aim of this study is to develop a very simple, rapid, and sensitive capillary zone electrophoresis technique coupled with a laser induced fluorescence detector (LIF) for the simultaneous determination of three major curcuminoids of turmeric, namely, curcumin, demethoxy curcumin (DMC), and bisdemethoxy curcumin (BDMC). Background electrolyte was selected as borate at pH 9.6 and (2-hydroxypropyl)-β-cyclodextrin (2-HP-β-CD) was added to prevent rapid alkali degradation of curcuminoids in buffer and to increase fluorescence intensities of molecules. With the addition of 2-HP-β-CD to the separation electrolyte, the fluorescence signal intensities of curcuminoids were enhanced considerably by 30, 40, and 54 fold for curcumin, DMC, and BDMC, respectively. The three curcuminoids of turmeric were fully separated and quantified in less than 4.5 min. The repeatability of the peak areas of curcuminoids for intra-day and inter-day experiments was in the satisfactory range of 2.26 and 2.55%, respectively. The LOD and LOQ values for the developed method were equal to or less than 0.081 and 0.270 μg/mL, respectively, for all curcuminoids. The developed method was successfully applied to find curcuminoids amount in turmeric samples and herbal supplements.

  14. glyXalign: high-throughput migration time alignment preprocessing of electrophoretic data retrieved via multiplexed capillary gel electrophoresis with laser-induced fluorescence detection-based glycoprofiling. (United States)

    Behne, Alexander; Muth, Thilo; Borowiak, Matthias; Reichl, Udo; Rapp, Erdmann


    Glycomics has become a rapidly emerging field and monitoring of protein glycosylation is needed to ensure quality and consistency during production processes of biologicals such as therapeutic antibodies or vaccines. Glycoanalysis via multiplexed CGE with LIF detection (xCGE-LIF) represents a powerful technique featuring high resolution, high sensitivity as well as high-throughput performance. However, sample data retrieved from this method exhibit challenges for downstream computational analysis due to intersample migration time shifts as well as stretching and compression of electropherograms. Here, we present glyXalign, a freely available and easy-to-use software package to automatically correct for distortions in xCGE-LIF based glycan data. We demonstrate its ability to outperform conventional algorithms such as dynamic time warping and correlation optimized warping in terms of processing time and alignment accuracy for high-resolution datasets. Built upon a set of rapid algorithms, the tool includes an intuitive graphical user interface and allows full control over all parameters. Additionally, it visualizes the alignment process and enables the user to readjust misaligned results. Software and documentation are available at © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Monitoring of phenolic compounds for the quality control of Melissa officinalis products by capillary electrophoresis. (United States)

    Acosta, Gimena; Arce, Silvia; Martínez, Luis D; Llabot, Juan; Gomez, María R


    Official assays for the quality control of Melissa officinalis L. (Lamiaceae) leaves establish the quantification of total hydroxycinnamic derivatives expressed as rosmarinic acid. The goal of this work was to develop a simple, fast and reliable method for monitoring the phenolic composition in herbs from the Lamiaceae family and for rapidly detecting M. officinalis adulteration or substitution in commercial medicinal samples in Argentina. A capillary zone electrophoresis (CZE) method was performed under the following conditions: the background electrolyte (BGE) consisted of 20 m m sodium tetraborate buffer, pH 9.2; the applied voltage was 25 kV; the capillary and sample temperatures were kept at 25 °C; the hydrodynamic mode was selected for the sample injection (3.45 kPa during 5 s). A CZE method that achieved the separation and simultaneous determination of eight related phenolic compounds in less than 11 min was optimised for application to control quality analysis of M. officinalis-based products. The method was validated according to the US Federal Drug Agency requirements and offers advantages in terms of analysis time, cost and operation. The proposed methodology can be applied to the standardisation and quality control of plant material and phytopharmaceutical products derived from the Lamiaceae family, as indicated by the results obtained in the analysis of commercial medicinal products in Argentina. Copyright © 2011 John Wiley & Sons, Ltd.

  16. Monitoring exocytosis and release from individual mast cells by capillary electrophoresis and UV imaging microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Yeung, E.S. [Ames Lab., IA (United States)]|[Iowa State Univ., Ames, IA (United States); Lillard, S.J. [Stanford Univ., CA (United States); McCloskey, M.A. [Iowa State Univ., Ames, IA (United States)


    The complex temporal evolution of on-column exocytotic release of serotonin from individual peritoneal mast cells (RPMCs) was monitored by using capillary electrophoresis and UV imaging microscopy. Laser-induced native fluorescence detection with 275-nm excitation was used, and a detection limit of 1.7 amol (S/N = 3; rms) was obtained for serotonin. A physiological running buffer was used to ensure that the cell remained viable throughout. The secretagogue was polymyxin B sulfate (Pmx). Following the injection of a single mast cell into the capillary, electromigration of Pmx toward and past the cell induced degranulation and release of serotonin. The time course of release was registered in the electropherograms with subsecond resolution. Subsequent introduction of SDS caused the cell to lyse completely and allowed the residual serotonin to be quantified. The average amount of serotonin observed per RPMC was 1.6 {+-} 0.6 fmol; the average percentage of serotonin released was 28 {+-} 14%. Events that are consistent with released serontonin from single submicron granules (250 aL each) were evident, each of which contained an average amount of 5.9 {+-} 3 amol. Alternatively, UV movies can be taken of the entire event to provide temporal and spatial information.

  17. Monitoring and scoring counter-diffusion protein crystallization experiments in capillaries by in situ dynamic light scattering.

    Directory of Open Access Journals (Sweden)

    Dominik Oberthuer

    Full Text Available In this paper, we demonstrate the feasibility of using in situ Dynamic Light Scattering (DLS to monitor counter-diffusion crystallization experiments in capillaries. Firstly, we have validated the quality of the DLS signal in thin capillaries, which is comparable to that obtained in standard quartz cuvettes. Then, we have carried out DLS measurements of a counter-diffusion crystallization experiment of glucose isomerase in capillaries of different diameters (0.1, 0.2 and 0.3 mm in order to follow the temporal evolution of protein supersaturation. Finally, we have compared DLS data with optical recordings of the progression of the crystallization front and with a simulation model of counter-diffusion in 1D.

  18. Monitoring and scoring counter-diffusion protein crystallization experiments in capillaries by in situ dynamic light scattering. (United States)

    Oberthuer, Dominik; Melero-García, Emilio; Dierks, Karsten; Meyer, Arne; Betzel, Christian; Garcia-Caballero, Alfonso; Gavira, Jose A


    In this paper, we demonstrate the feasibility of using in situ Dynamic Light Scattering (DLS) to monitor counter-diffusion crystallization experiments in capillaries. Firstly, we have validated the quality of the DLS signal in thin capillaries, which is comparable to that obtained in standard quartz cuvettes. Then, we have carried out DLS measurements of a counter-diffusion crystallization experiment of glucose isomerase in capillaries of different diameters (0.1, 0.2 and 0.3 mm) in order to follow the temporal evolution of protein supersaturation. Finally, we have compared DLS data with optical recordings of the progression of the crystallization front and with a simulation model of counter-diffusion in 1D.

  19. Particle separations by electrophoretic techniques

    Energy Technology Data Exchange (ETDEWEB)

    Ballou, N.E.; Petersen, S.L.; Ducatte, G.R.; Remcho, V.T.


    A new method for particle separations based on capillary electrophoresis has been developed and characterized. It uniquely separates particles according to their chemical nature. Separations have been demonstrated with chemically modified latex particles and with inorganic oxide and silicate particles. Separations have been shown both experimentally and theoretically to be essentially independent of particle size in the range of about 0.2 {mu}m to 10 {mu}m. The method has been applied to separations of U0{sub 2} particles from environmental particulate material. For this, an integrated method was developed for capillary electrophoretic separation, collection of separated fractions, and determinations of U0{sub 2} and environmental particles in each fraction. Experimental runs with the integrated method on mixtures of UO{sub 2} particles and environmental particulate material demonstrated enrichment factors of 20 for UO{sub 2} particles in respect to environmental particles in the U0{sub 2}containing fractions. This enrichment factor reduces the costs and time for processing particulate samples by the lexan process by a factor of about 20.

  20. Principles of Micellar Electrokinetic Capillary Chromatography Applied in Pharmaceutical Analysis


    Árpád Gyéresi; Eleonora Mircia; Brigitta Simon; Aura Rusu; Gabriel Hancu


    Since its introduction capillary electrophoresis has shown great potential in areas where electrophoretic techniques have rarely been used before, including here the analysis of pharmaceutical substances. The large majority of pharmaceutical substances are neutral from electrophoretic point of view, consequently separations by the classic capillary zone electrophoresis; where separation is based on the differences between the own electrophoretic mobilities of the analytes; are hard to achieve...

  1. Monitoring Homovanillic Acid and Vanillylmandelic Acid in Human Urine by Capillary Electrophoresis with Electrochemical Detection

    Institute of Scientific and Technical Information of China (English)


    A simple, rapid and low-cost method of separation and determination of homovanillic acid and vanillylmandelic acid in human urine was developed based on capillary zone electrophoresis / amperometric detection with high sensitivity and good resolution.

  2. Enhanced electrophoretic DNA separation in photonic crystal fiber. (United States)

    Sun, Yi; Nguyen, Nam-Trung; Kwok, Yien Chian


    Joule heating generated by the electrical current in capillary electrophoresis leads to a temperature gradient along the separation channel and consequently affects the separation quality. We describe a method of reducing the Joule heating effect by incorporating photonic crystal fiber into a micro capillary electrophoresis chip. The photonic crystal fiber consists of a bundle of extremely narrow hollow channels, which ideally work as separation columns. Electrophoretic separation of DNA fragments was simultaneously but independently carried out in 54 narrow capillaries with a diameter of 3.7 microm each. The capillary bundle offers more efficient heat dissipation owing to the high surface-to-volume ratio. Under the same electrical field strength, notable improvement in resolution was obtained in the capillary bundle chip.

  3. Capillaries for use in a multiplexed capillary electrophoresis system (United States)

    Yeung, E.S.; Chang, H.T.; Fung, E.N.


    The invention provides a side-entry optical excitation geometry for use in a multiplexed capillary electrophoresis system. A charge-injection device is optically coupled to capillaries in the array such that the interior of a capillary is imaged onto only one pixel. In Sanger-type 4-label DNA sequencing reactions, nucleotide identification (``base calling``) is improved by using two long-pass filters to split fluorescence emission into two emission channels. A binary poly(ethyleneoxide) matrix is used in the electrophoretic separations. 19 figs.

  4. [Quantitative monitoring the concentration changes of organic acids in fermentation process of Clostridium acetobutylicum using capillary ion electrophoresis]. (United States)

    Cheng, Jiayi; Wang, Tongdan; Kang, Jingwu


    A method for monitoring the concentration changes of organic acids in the fermentation process of Clostridium acetobutylicum by capillary ion electrophoresis has been developed. In this study, 4-methoxybenzoic acid was used as the background electrolyte for the indirect ultraviolet detection, and cetyltrimethylammonium chloride (CTAC) was employed as the electroosmotic flow modifier. The sample of fermentation was simply treated by centrifugation and dilution. The optimal conditions for the separation were established as 10 mmol/L of 4-methoxybenzoic acid solution (pH 5. 8) and 0. 15 mmol/L of CTAC solution. The limits of quantification for lactate, acetate and n-butyrate were 1.22, 0.38 and 0.58 mg/L, respectively. The method can be successfully used for the metabolic flux analysis of Clostridium acetobutylicum.

  5. Column-coupling strategies for multidimensional electrophoretic separation techniques. (United States)

    Kler, Pablo A; Sydes, Daniel; Huhn, Carolin


    Multidimensional electrophoretic separations represent one of the most common strategies for dealing with the analysis of complex samples. In recent years we have been witnessing the explosive growth of separation techniques for the analysis of complex samples in applications ranging from life sciences to industry. In this sense, electrophoretic separations offer several strategic advantages such as excellent separation efficiency, different methods with a broad range of separation mechanisms, and low liquid consumption generating less waste effluents and lower costs per analysis, among others. Despite their impressive separation efficiency, multidimensional electrophoretic separations present some drawbacks that have delayed their extensive use: the volumes of the columns, and consequently of the injected sample, are significantly smaller compared to other analytical techniques, thus the coupling interfaces between two separations components must be very efficient in terms of providing geometrical precision with low dead volume. Likewise, very sensitive detection systems are required. Additionally, in electrophoretic separation techniques, the surface properties of the columns play a fundamental role for electroosmosis as well as the unwanted adsorption of proteins or other complex biomolecules. In this sense the requirements for an efficient coupling for electrophoretic separation techniques involve several aspects related to microfluidics and physicochemical interactions of the electrolyte solutions and the solid capillary walls. It is interesting to see how these multidimensional electrophoretic separation techniques have been used jointly with different detection techniques, for intermediate detection as well as for final identification and quantification, particularly important in the case of mass spectrometry. In this work we present a critical review about the different strategies for coupling two or more electrophoretic separation techniques and the

  6. Principles of micellar electrokinetic capillary chromatography applied in pharmaceutical analysis. (United States)

    Hancu, Gabriel; Simon, Brigitta; Rusu, Aura; Mircia, Eleonora; Gyéresi, Arpád


    Since its introduction capillary electrophoresis has shown great potential in areas where electrophoretic techniques have rarely been used before, including here the analysis of pharmaceutical substances. The large majority of pharmaceutical substances are neutral from electrophoretic point of view, consequently separations by the classic capillary zone electrophoresis; where separation is based on the differences between the own electrophoretic mobilities of the analytes; are hard to achieve. Micellar electrokinetic capillary chromatography, a hybrid method that combines chromatographic and electrophoretic separation principles, extends the applicability of capillary electrophoretic methods to neutral analytes. In micellar electrokinetic capillary chromatography, surfactants are added to the buffer solution in concentration above their critical micellar concentrations, consequently micelles are formed; micelles that undergo electrophoretic migration like any other charged particle. The separation is based on the differential partitioning of an analyte between the two-phase system: the mobile aqueous phase and micellar pseudostationary phase. The present paper aims to summarize the basic aspects regarding separation principles and practical applications of micellar electrokinetic capillary chromatography, with particular attention to those relevant in pharmaceutical analysis.

  7. Principles of Micellar Electrokinetic Capillary Chromatography Applied in Pharmaceutical Analysis

    Directory of Open Access Journals (Sweden)

    Árpád Gyéresi


    Full Text Available Since its introduction capillary electrophoresis has shown great potential in areas where electrophoretic techniques have rarely been used before, including here the analysis of pharmaceutical substances. The large majority of pharmaceutical substances are neutral from electrophoretic point of view, consequently separations by the classic capillary zone electrophoresis; where separation is based on the differences between the own electrophoretic mobilities of the analytes; are hard to achieve. Micellar electrokinetic capillary chromatography, a hybrid method that combines chromatographic and electrophoretic separation principles, extends the applicability of capillary electrophoretic methods to neutral analytes. In micellar electrokinetic capillary chromatography, surfactants are added to the buffer solution in concentration above their critical micellar concentrations, consequently micelles are formed; micelles that undergo electrophoretic migration like any other charged particle. The separation is based on the differential partitioning of an analyte between the two-phase system: the mobile aqueous phase and micellar pseudostationary phase. The present paper aims to summarize the basic aspects regarding separation principles and practical applications of micellar electrokinetic capillary chromatography, with particular attention to those relevant in pharmaceutical analysis.

  8. Capillary Hemangioma (United States)

    ... Frequently Asked Questions Español Condiciones Chinese Conditions Capillary Hemangioma En Español Read in Chinese What is a capillary hemangioma? A capillary hemangioma (“strawberry” birthmark) is a benign ( ...

  9. Capillary electrophoresis single-strand conformation polymorphism for the monitoring of gastrointestinal microbiota of chicken flocks. (United States)

    Pissavin, C; Burel, C; Gabriel, I; Beven, V; Mallet, S; Maurice, R; Queguiner, M; Lessire, M; Fravalo, P


    The objective of the present study was to evaluate the capillary electrophoresis single-strand conformation polymorphism (CE-SSCP) to characterize poultry gut microbiota and the ability of this molecular method to detect modifications related to rearing conditions to be used as an epidemiological tool. The V3 region of the 16S rRNA gene was selected as the PCR target. Our results showed that this method provides reproducible data. The microbiota analysis of individuals showed that variability between individual fingerprints was higher for ileum and cloaca than for ceca. However, pooling the samples decreased this variability. To estimate the variability within and between farms, we compared molecular gut patterns of animals from the same hatchery reared under similar conditions and fed the same diet in 2 separate farms. Total aerobic bacteria, coliforms, and lactic acid bacteria were enumerated using conventional bacteriological methods. A significant difference was observed for coliforms present in the ceca and the cloaca depending on the farm. Ileal contents fingerprints were more closely related to those of cloacal contents than to those of ceca contents. When comparing samples from the 2 farms, a specific microbiota was highlighted for each farm. For each gut compartment, the microbiota fingerprints were joined in clusters according to the farm. Thus, this rapid and potentially high-throughput method to obtain gut flora fingerprints is sensitive enough to detect a "farm effect" on the balance of poultry gut microbiota despite the birds being fed the same regimens and reared under similar conditions.

  10. Combined electrophoretic-separation and electrospray method and system (United States)

    Smith, R.D.; Olivares, J.A.


    A system and method for analyzing molecular constituents of a composition sample includes: forming a solution of the sample, separating the solution by capillary zone electrophoresis into an eluent of constituents longitudinally separated according to their relative electrophoretic mobilities, electrospraying the eluent to form a charged spray in which the molecular constituents have a temporal distribution; and detecting or collecting the separated constituents in accordance with the temporal distribution in the spray. A first high-voltage (e.g., 5--100 kVDC) is applied to the solution. The spray is charged by applying a second high voltage (e.g., [+-]2--8 kVDC) between the eluent at the capillary exit and a cathode spaced in front of the exit. A complete electrical circuit is formed by a conductor which directly contacts the eluent at the capillary exit. 10 figs.

  11. Monitoring of cefepime in human serum and plasma by micellar electrokinetic capillary chromatography: Improvement of sample preparation and validation by liquid chromatography coupled to mass spectrometry. (United States)

    Šestáková, Nela; Theurillat, Regula; Sendi, Parham; Thormann, Wolfgang


    Cefepime monitoring in deproteinized human serum and plasma by micellar electrokinetic capillary chromatography and liquid chromatography coupled to mass spectrometry in presence of other drugs is reported. For micellar electrokinetic capillary chromatography, sample preparation comprised dodecylsulfate protein precipitation at pH 4.5 using an increased buffer concentration compared to that of a previous assay and removal of hydrophobic compounds with dichloromethane. This provided robust conditions for cefepime analysis in the presence of sulfamethoxazole and thus enabled its determination in samples of patients that receive co-trimoxazole. The liquid chromatography assay is based upon use of a column with a pentafluorophenyl-propyl modified and multi-endcapped stationary phase and the coupling to electrospray ionization with a single quadrupole detector. The performances of both assays with multi-level internal calibration were assessed with calibration and control samples and both assays were determined to be robust. Cefepime levels monitored by micellar electrokinetic capillary chromatography in samples from patients that were treated with cefepime only and with cefepime and co-trimoxazole were found to compare well with those obtained by liquid chromatography coupled to mass spectrometry. Cefepime drug levels determined by micellar electrokinetic capillary chromatography could thereby be validated. This article is protected by copyright. All rights reserved.

  12. Chiral ionic liquids in chromatographic and electrophoretic separations. (United States)

    Kapnissi-Christodoulou, Constantina P; Stavrou, Ioannis J; Mavroudi, Maria C


    This report provides an overview of the application of chiral ionic liquids (CILs) in separation technology, and particularly in capillary electrophoresis and both gas and liquid chromatography. There is a large number of CILs that have been synthesized and designed as chiral agents. However, only a few have successfully been applied in separation technology. Even though this application of CILs is still in its early stages, the scientific interest is increasing dramatically. This article is focused on the use of CILs as chiral selectors, background electrolyte additives, chiral ligands and chiral stationary phases in electrophoretic and chromatographic techniques. Different examples of CILs, which contain either a chiral cation, a chiral anion or both, are presented in this review article, and their major advantages along with their potential applications in chiral electrophoretic and chromatographic recognition are discussed. Copyright © 2014 Elsevier B.V. All rights reserved.

  13. Cross-validity of a portable glucose capillary monitors in relation to enzymatic spectrophotometer methods

    Directory of Open Access Journals (Sweden)

    William Alves Lima


    Full Text Available The glucose is an important substrate utilizaded during exercise. Accurate measurement of glucose is vital to obtain trustworthy results. The enzymatic spectrophotometer methods are generally considered the “goldstandard” laboratory procedure for measuring of glucose (GEnz, is time consuming, costly, and inappropriate for large scale field testing. Compact and portable glucose monitors (GAccu are quick and easy methods to assess glucose on large numbers of subjects. So, this study aimed to test the cross-validity of GAccu. The sample was composed of 107 men (aged= 35.4±10.7 years; stature= 168.4±6.9 cm; body mass= 73.4±11.2 kg; %fat= 20.9±8.3% – by dual energy x-ray absorptiometry. Blood for measuring fasting glucose was taken in basilar vein (Genz, Bioplus: Bio-2000 and in ring finger (GAccu: Accu-Chek© Advantage©, after a 12-hour overnight fast. GEnz was used as the criterion for cross-validity. Paired t-test shown differences (p RESUMO A glicose é um substrato importante utilizado durante o exercício físico. Medidas acuradas da glicose são fundamentais para a obtenção de resultados confiáveis. O método laboratorial de espectrofotometria enzimática geralmente é considerado o procedimento “padrão ouro” para medir a glicose (GEnz, o qual requer tempo, custo e é inapropriado para o uso em larga escala. Monitores portáteis de glicose (GAccu são rápidos e fáceis para medir a glicose em um grande número de sujeitos. Então, este estudo teve por objetivo testar a validade concorrente do GAccu. A amostra foi composta por 107 homens (idade= 35,4±10,7 anos; estatura= 168,4±6,9 cm; massa corporal= 73,4±11,2 kg; %gordura= 20,9±8,3% – por absortometria de raio-x de dupla energia. O sangue para mensurar a glicose em jejum foi tirado na veia basilar (Genz, Bioplus: Bio-2000 e no dedo anular (GAccu - Accu- Chek© Advantage©, depois de 12h de jejum noturno. O GEnz foi usado como critério para testar a validade

  14. Capillary sample (United States)

    ... several times a day using capillary blood sampling. Disadvantages to capillary blood sampling include: Only a limited ... do not constitute endorsements of those other sites. Copyright 1997-2017, A.D.A.M., Inc. Duplication ...

  15. A capillary electrophoresis method with dynamic pH junction stacking for the monitoring of cerebroside sulfotransferase. (United States)

    Li, Wenjin; Zech, Isabell; Gieselmann, Volkmar; Müller, Christa E


    Metachromatic leukodystrophy (MLD) is a rare and severe genetic disease. Inhibition of cerebroside sulfotransferase (CST) has been proposed as a promising new therapeutic strategy for the treatment of MLD. CST catalyzes the transfer of a sulfate group from the coenzyme 3'-phosphoadenosine-5'-phosphosulfate (PAPS) to cerebroside yielding cerebroside sulfate and adenosine-3',5'-diphosphate (PAP). So far only a few weak CST inhibitors have been described. The goal of the present study was to establish a suitable assay for identifying and characterizing novel CST inhibitors. To this end, we developed and optimized a capillary electrophoresis (CE) based assay for monitoring the catalytic activity of CST by measuring the formation of PAP. A sample matrix consisting of 5mM phosphate buffer with about 0.0001% polybrene at pH 7.4 and a background electrolyte (BGE) containing 75 mM phosphate buffer with 0.002% polybrene at pH 5.6 were utilized to achieve a stacking effect for PAP by dynamic pH junction. This led to a limit of detection for the enzymatic product PAP of 66.6 nM. The CE method was sensitive, robust, and suitable for CST inhibitor screening, Ki value determination, and enzyme kinetic studies. Selected reference compounds were tested in order to validate the assay, including the substrates cerebroside and psychosine, and the inhibitor Congo Red. The newly developed CE method will be useful for the identification and development of novel CST inhibitors which are urgently needed for the treatment of MLD.

  16. Capillary electrophoresis in a fused-silica capillary with surface roughness gradient. (United States)

    Horká, Marie; Šlais, Karel; Karásek, Pavel; Růžička, Filip; Šalplachta, Jiří; Šesták, Jozef; Kahle, Vladislav; Roth, Michal


    The electro-osmotic flow, a significant factor in capillary electrophoretic separations, is very sensitive to small changes in structure and surface roughness of the inner surface of fused silica capillary. Besides a number of negative effects, the electro-osmotic flow can also have a positive effect on the separation. An example could be fused silica capillaries with homogenous surface roughness along their entire separation length as produced by etching with supercritical water. Different strains of methicillin-resistant and methicillin-susceptible Staphylococcus aureus were separated on that type of capillaries. In the present study, fused-silica capillaries with a gradient of surface roughness were prepared and their basic behavior was studied in capillary zone electrophoresis with UV-visible detection. First the influence of the electro-osmotic flow on the peak shape of a marker of electro-osmotic flow, thiourea, has been discussed. An antifungal agent, hydrophobic amphotericin B, and a protein marker, albumin, have been used as model analytes. A significant narrowing of the detected zones of the examined analytes was achieved in supercritical-water-treated capillaries as compared to the electrophoretic separation in smooth capillaries. Minimum detectable amounts of 5 ng/mL amphotericin B and 5 μg/mL albumin were reached with this method.

  17. Capillary Electrophoresis in the Analysis of Polyunsaturated Fatty Acids

    Directory of Open Access Journals (Sweden)

    Gabriel Hancu


    Full Text Available The aim of this study to inventory the main electrophoretic methods for identification and quantitative determination of fatty acids from different biological matrices. Critical analysis of electrophoretic methods reported in the literature show that the determination of polyunsaturated fatty acids can be made by: capillary zone electrophoresis, micellar electrokinetic chromatography and microemulsion electrokinetic chromatography using different detection systems such as ultraviolet diode array detection, laser induced fluorescence or mass – spectrometry. Capillary electrophoresis is a fast, low-cost technique used for polyunsaturated fatty acids analysis although their determination is mostly based on gas chromatography.

  18. Fast methods for analysis of neurotransmitters from single cell and monitoring their releases in central nervous system by capillary electrophoresis, fluorescence microscopy and luminescence imaging

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Ziqiang [Iowa State Univ., Ames, IA (United States)


    Fast methods for separation and detection of important neurotransmitters and the releases in central nervous system (CNS) were developed. Enzyme based immunoassay combined with capillary electrophoresis was used to analyze the contents of amino acid neurotransmitters from single neuron cells. The release of amino acid neurotransmitters from neuron cultures was monitored by laser induced fluorescence imaging method. The release and signal transduction of adenosine triphosphate (ATP) in CNS was studied with sensitive luminescence imaging method. A new dual-enzyme on-column reaction method combined with capillary electrophoresis has been developed for determining the glutamate content in single cells. Detection was based on monitoring the laser-induced fluorescence of the reaction product NADH, and the measured fluorescence intensity was related to the concentration of glutamate in each cell. The detection limit of glutamate is down to 10-8 M level, which is 1 order of magnitude lower than the previously reported detection limit based on similar detection methods. The mass detection limit of a few attomoles is far superior to that of any other reports. Selectivity for glutamate is excellent over most of amino acids. The glutamate content in single human erythrocyte and baby rat brain neurons were determined with this method and results agreed well with literature values.

  19. Impact of screening and monitoring of capillary blood glucose in the detection of hyperglycemia and hypoglycemia in non-critical inpatients

    Directory of Open Access Journals (Sweden)

    Rogerio Silicani Ribeiro


    Full Text Available Objective: To evaluate the impact of screening hyper and hypoglycemia measured by capillary glycemia and standard monitorization of  hyperglycemic patients hospitalized in regular care units of Hospital Israelita Albert Einstein. Methods: The capillary glycemia was  measured by the Precision PCx (Abbott glucosimeter, using the PrecisionWeb (Abbott software. The detection of hyper and hypoglycemia during the months of May/June were compared to those of March/April in 2009 and to the frequency of the diagnosis of diabetes in 2007. Rresults: There was an increase in the glycemia screening from 27.7 to 77.5% of hospitalized patients (p < 0.001, of hyperglycemia detection (from 9.3 to 12.2%; p < 0.001 and of hypoglycemia (from 1.5 to 3.3%; p < 0.001 during  the months of May/June  2009. According to this action 14 patients for each additional case of hyperglycemia and 26 cases for each case of hypoglycemia were identified. The detection of hyperglycemia was significantly higher (p < 0.001 than the frequency of registered diagnosis related do diabetes in the year of 2007. Cconclusions: the adoption of an institutional program of glycemia monitorization improves the detection of hyper and hypoglycemia and glycemia control in hospitalized patients in regular care units.

  20. Fast methods for analysis of neurotransmitters from single cell and monitoring their releases in central nervous system by capillary electrophoresis, fluorescence microscopy and luminescence imaging

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Ziqiang


    Fast methods for separation and detection of important neurotransmitters and the releases in central nervous system (CNS) were developed. Enzyme based immunoassay combined with capillary electrophoresis was used to analyze the contents of amino acid neurotransmitters from single neuron cells. The release of amino acid neurotransmitters from neuron cultures was monitored by laser induced fluorescence imaging method. The release and signal transduction of adenosine triphosphate (ATP) in CNS was studied with sensitive luminescence imaging method. A new dual-enzyme on-column reaction method combined with capillary electrophoresis has been developed for determining the glutamate content in single cells. Detection was based on monitoring the laser-induced fluorescence of the reaction product NADH, and the measured fluorescence intensity was related to the concentration of glutamate in each cell. The detection limit of glutamate is down to 10{sup {minus}8} M level, which is 1 order of magnitude lower than the previously reported detection limit based on similar detection methods. The mass detection limit of a few attomoles is far superior to that of any other reports. Selectivity for glutamate is excellent over most of amino acids. The glutamate content in single human erythrocyte and baby rat brain neurons were determined with this method and results agreed well with literature values.

  1. Impact of capillary conditioning and background electrolyte composition on capillary electrophoresis analysis of prostate specific antigen isoforms. (United States)

    Farina-Gomez, Noemi; Puerta, Angel; Gonzalez, Monica; Diez-Masa, Jose Carlos; de Frutos, Mercedes


    Glycoproteins expressed in the human body can experience modifications as result of pathological situations. Detection of those changes can be useful as disease biomarkers. As a result of these modifications, size and/or electrical charge of the glycoprotein can be altered. Migration in capillary zone electrophoresis (CZE) is governed by the size to charge ratio of the analyte and therefore this separation technique can be used to monitor those modifications. At its turn, the alteration of the electrophoretical pattern of a given glycoprotein could be used as disease biomarker. To this aim, high repeatability for separation of a large number of peaks for a given glycoprotein is desirable. For prostate cancer, new markers are needed to decrease the high number of false positive results provided by the biomarkers currently used in clinics. In this sense, CZE methods for analysis of the several prostate specific antigen (PSA) peaks which this glycoprotein exhibit, called isoforms and containing one or more glycoforms, could be useful to study the PSA pattern as prostate cancer marker. In this study two complementary strategies to achieve both lot-to-lot capillary repeatability and high resolution of a large number of PSA isoforms are developed. Better performance and precision have been obtained for capillaries conditioned with HCl than for those conditioned with NaOH. Optimization of the background electrolyte (BGE) pH value to 8.0 and inclusion of 3M urea on its composition were the two factors of highest impact for enhancing resolution of the highest number of PSA peaks. Under the optimized conditions for capillary conditioning and BGE pH and composition, long-term resolution of 10 isoforms of PSA was achieved. Inter-day (n=3) %RSD was 0.55 for the ratio tm/tEOF, 1.15 for μeff, and 5.02 for % Acorr of the PSA peaks.

  2. Selective Photo-Initiated Electrophoretic Separator Project (United States)

    National Aeronautics and Space Administration — Physical Optics Corporation (POC) proposes to develop a Selective Photoinitiated Electrophoretic Separator (SPIES) System to address NASA's volatile gas separation...

  3. Evaluation of migration behaviour of therapeutic peptide hormones in capillary electrophoresis using polybrene-coated capillaries. (United States)

    Aptisa, Ghiulendan; Benavente, Fernando; Sanz-Nebot, Victoria; Chirila, Elisabeta; Barbosa, José


    Modelling electrophoretic mobility as a function of pH can be simultaneously used for determination of ionization constants and for rapid selection of the optimum pH for separation of mixtures of the modelled compounds. In this work, equations describing the effect of pH on electrophoretic behaviour were used to investigate migration of a series of polyprotic amphoteric peptide hormones between pH 2 and 12 in polybrene-coated capillaries. Polybrene (hexadimethrin bromide) is a polymer composed of quaternary amines that is strongly adsorbed by the fused-silica inner surface, preventing undesired interactions between the peptides and the inner capillary wall. In polybrene-coated capillaries the separation voltage must be reversed, because of the anodic electroosmotic flow promoted by the polycationic polymer attached to the inner capillary wall. The possibility of using polybrene-coated capillaries for determination of accurate ionization constants has been evaluated and the optimum pH for separation of a mixture of the peptide hormones studied has been selected. Advantages and disadvantages of using bare fused-silica and polybrene-coated capillaries for these purposes are discussed.

  4. Capillary electrophoresis as a versatile tool for the bioanalysis of drugs - a review

    NARCIS (Netherlands)

    Boone, CM; Waterval, JCM; Lingeman, H; Ensing, K; Underberg, WJM


    This review article presents an overview of current research on the use of capillary electrophoretic techniques for the analysis of drugs in biological matrices. The principles of capillary electrophoresis and its various separation and detection modes are briefly discussed. Sample pretreatment meth

  5. A New Method to Measure Electroosmotic Flow Mobility of Capillary Electrophoresis by Abrupt Change of Current De-noising via Wavelet Transform

    Institute of Scientific and Technical Information of China (English)

    LI,Qian-Feng; ZHANG,Xiao-Yun; ZHANG,Hong-Yi; CHEN,Xing-Guo; LIU,Man-Cang; HU,Zhi-De


    The electroosmotic flow mobility has been measured by the combination of monitoring the change in electric current dur ing electrophoretic run and operating the wavelet transform. Once the sample solvent zone with different ionic stenggth from background electrolyte migrated from the capillary, a sudden change in current could be observed from the ekectric current record of time history. The exact time (in the middle of abrupt range) corresponding to the abrupt change in cur rent was determined by wavelet transform. This work showed posed method was in a good agreement with the neutral mark er method commonly used.

  6. Automated dual capillary electrophoresis system with hydrodynamic injection for the concurrent determination of cations and anions

    Energy Technology Data Exchange (ETDEWEB)

    Pham, Thi Thanh Thuy; Mai, Thanh Duc [University of Basel, Department of Chemistry, Spitalstrasse 51, Basel 4056 (Switzerland); Centre for Environmental Technology and Sustainable Development (CETASD), Hanoi University of Science, Nguyen Trai Street 334, Hanoi (Viet Nam); Nguyen, Thanh Dam [Centre for Environmental Technology and Sustainable Development (CETASD), Hanoi University of Science, Nguyen Trai Street 334, Hanoi (Viet Nam); Sáiz, Jorge [Department of Analytical Chemistry, Physical Chemistry and Chemical Engineering – University of Alcalá, Ctra. Madrid-Barcelona km 33.6, Alcalá de Henares, Madrid 28871 (Spain); Pham, Hung Viet, E-mail: [Centre for Environmental Technology and Sustainable Development (CETASD), Hanoi University of Science, Nguyen Trai Street 334, Hanoi (Viet Nam); Hauser, Peter C., E-mail: [University of Basel, Department of Chemistry, Spitalstrasse 51, Basel 4056 (Switzerland)


    Highlights: • Concurrent determination of cations and anions was carried out by electrophoretic separation. • Optimized conditions for each class of analystes was possible by using separate capillaries. • Simultaneous hydrodynamic injection was carried out. • Pneumatic actuation was used for flushing and sample handling. • The denitrification of drinking water was successfully demonstrated. - Abstract: The capillary electrophoresis instrument developed for the concurrent determination of cations and anions features two separate capillaries and individual detectors to allow independent optimization for each group of ions. The capillaries are joined in a common injector block. The sample is drawn into the injector with a small membrane pump and automated simultaneous injection into both capillaries is achieved by pressurization of the fluid with compressed air. Flushing of the injector and of the capillaries with the background electrolyte is also carried out automatically by the same means. The buffer consisted of 12 mM histidine and 2 mM 18-crown-6 adjusted to pH 4 with acetic acid and was suitable for the contactless conductivity detection employed. The system was optimized for the determination of cationic NH{sub 4}{sup +} and anionic NO{sub 3}{sup −} and NO{sub 2}{sup −}, and linear calibration curves from about 20 μM up to about 1.5 mM were obtained for these ions. In a test run over 8 h, the reproducibility for the peak areas was within ±7%. For demonstration, the instrument was successfully applied to the concurrent monitoring of the concentrations of the three ions during the biological removal of ammonium from contaminated groundwater in a sequencing batch reactor, where NO{sub 3}{sup −} and NO{sub 2}{sup −} are formed as intermediate products.

  7. Use of capillary electrophoresis-sodium dodecyl sulfate to monitor disulfide scrambled forms of an Fc fusion protein during purification process. (United States)

    Hapuarachchi, Suminda; Fodor, Szilan; Apostol, Izydor; Huang, Gang


    Overexpression of recombinant Fc fusion proteins in Escherichia coli frequently results in the production of inclusion bodies that are subsequently used to produce fully functional protein by an in vitro refolding process. During the refolding step, misfolded proteins such as disulfide scrambled forms can be formed, and purification steps are used to remove these product-related impurities to produce highly purified therapeutic proteins. A variety of analytical methods are commonly used to monitor protein variants throughout the purification process. Capillary electrophoresis (CE)-based techniques are gaining popularity for such applications. In this work, we used a nonreduced capillary electrophoresis-sodium dodecyl sulfate (nrCE-SDS) method for the analysis of disulfide scrambled forms in a fusion protein. Under denatured nonreduced conditions, an extra post-shoulder peak was observed at all purification steps. Detailed characterization revealed that the peak was related to the disulfide scrambled forms and was isobaric with the correctly folded product. In addition, when sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) was used during the CE-SDS peak characterization, we observed that the migration order of scrambled forms is reversed on CE-SDS versus SDS-PAGE. This illustrates the importance of establishing proper correlation of these two techniques when they are used interchangeably to guide the purification process and to characterize proteins.

  8. High-sensitivity capillary electrophoresis method for monitoring purine nucleoside phosphorylase and adenosine deaminase reactions by a reversed electrode polarity switching mode. (United States)

    Iqbal, Jamshed; Müller, Christa E


    A simple, efficient, and highly sensitive in-line CE method was developed for the characterization and for inhibition studies of the nucleoside-metabolizing enzymes purine nucleoside phosphorylase (PNP) and adenosine deaminase (ADA) present in membrane preparations of human 1539 melanoma cells. After filling the running buffer (50 mM borate buffer, 100 mM SDS, pH 9.10) into a fused-silica capillary (50 cm effective length × 75 μm), a large sample volume was loaded by hydrodynamic injection (5 psi, 36 s), followed by the removal of the large plug of sample matrix from the capillary using polarity switching (-20 kV). The current was monitored and the polarity was reversed when 95% of the current had been recovered. The separation of the neutral analytes (nucleosides and nucleobases) was performed by applying a voltage of 15 kV. An about 10-fold improvement of sensitivity for the five investigated analytes (adenosine, inosine, adenine, hypoxanthine, xanthine) was achieved by large-volume stacking with polarity switching when compared with CE without stacking. For inosine and adenine detection limits as low as 60 nM were achieved. To the best of our knowledge, this represents the highest sensitivity for nucleoside and nucleobase analysis using CE with UV detection reported so far. The Michaelis-Menten constants (K(m)) for PNP and ADA and the inhibition constants (K(i)) for standard inhibitors determined with the new method were consistent with literature data.

  9. Separation and analysis of triazine herbcide residues by capillary electrophoresis. (United States)

    Elbashir, Abdalla A; Aboul-Enein, Hassan Y


    Triazines are widely used in agriculture around the world as selective pre- and post-emergence herbicides for the control of broad leaf and grassy weeds. With high toxicity and persistence, triazines can contaminate the environment and crops, so the development of rapid and sensitive methods for the determination of different triazines is necessary. Capillary electrophoresis comprises a group of techniques used to separate chemical mixtures. Analytical separation is based on different electrophoretic mobilities. This review focuses on the analysis of triazine herbicides with different modes of capillary electrophoresis, including capillary zone electrophoresis, micellar electrokinetic capillary electrophoresis, capillary electrochromatography and nonaqueous capillary electrophoresis. Determinations of triazines in various matrices such as surface water, groundwater, vegetables, soil and grains are emphasized.

  10. Electrophoretic karyotype of Cercospora kikuchii. (United States)

    Hightower, R C; Callahan, T M; Upchurch, R G


    Classical genetic analyses are not possible with the phytopathogenic fungus Cercospora kikuchii since no sexual stage has been identified. To facilitate gene mapping and to develop an understanding of the genome organization of C. kikuchii, an electrophoretic karyotype has been obtained using contour-clamped homogeneous electric field gel electrophoresis (CHEF). Eight chromosomes, two of which migrate as a doublet, have been separated into seven bands ranging from 2.0 to 5.5 Mb. Using this determination of chromosome number and size, the total genome size of C. kikuchii is estimated to be 28.4 Mb. In addition, genes encoding tubulin, ribosomal DNA, and four previously isolated light-enhanced cDNAs from C. kikuchii were assigned to chromosomes by Southern-hybridization analysis of CHEF blots.

  11. Direct methods for dynamic monitoring of secretions from single cells by capillary electrophoresis and microscopy with laser-induced native fluorescence detection

    Energy Technology Data Exchange (ETDEWEB)

    Tong, W.


    Microscale separation and detection methods for real-time monitoring of dynamic cellular processes (e.g., secretion) by capillary electrophoresis (CE) and microscopic imaging were developed. Ultraviolet laser-induced native fluorescence (LINF) provides simple, sensitive and direct detection of neurotransmitters and proteins without any derivatization. An on-column CE-LINF protocol for quantification of the release from single cell was demonstrated. Quantitative measurements of both the amount of insulin released from and the amount remaining in the cell ({beta}TC3) were achieved simultaneously. Secretion of catecholamines (norepinephrine (NE) and epinephrine (E)) from individual bovine adrenal chromaffin cells was determined using the on-column CE-LINF. Direct visualization of the secretion process of individual bovine adrenal chromaffin cells was achieved by LINF imaging microscopy with high temporal and spatial resolution. The secretion of serotonin from individual leech Retzius neurons was directly characterized by LINF microscopy with high spatial resolution.

  12. Direct methods for dynamic monitoring of secretions from single cells by capillary electrophoresis and microscopy with laser-induced native fluorescence detection

    Energy Technology Data Exchange (ETDEWEB)

    Tong, Wei [Iowa State Univ., Ames, IA (United States)


    Microscale separation and detection methods for real-time monitoring of dynamic cellular processes (e.g., secretion) by capillary electrophoresis (CE) and microscopic imaging were developed. Ultraviolet laser-induced native fluorescence (LINF) provides simple, sensitive and direct detection of neurotransmitters and proteins without any derivatization. An on-column CE-LINF protocol for quantification of the release from single cell was demonstrated. Quantitative measurements of both the amount of insulin released from and the amount remaining in the cell (βTC3) were achieved simultaneously. Secretion of catecholamines (norepinephrine (NE) and epinephrine (E)) from individual bovine adrenal chromaffin cells was determined using the on-column CE-LINF. Direct visualization of the secretion process of individual bovine adrenal chromaffin cells was achieved by LINF imaging microscopy with high temporal and spatial resolution. The secretion of serotonin from individual leech Retzius neurons was directly characterized by LINF microscopy with high spatial resolution.

  13. Biomedical applications of capillary electrophoresis (United States)

    Kartsova, L. A.; Bessonova, E. A.


    The review deals with modern analytical approaches used in capillary electrophoresis for solving medical and biological problems: search for biomarkers of various diseases and rapid diagnosis based on characteristic profiles of biologically active compounds by capillary electrophoresis with mass spectrometric detection; monitoring of the residual drugs in biological fluids for evaluating the efficiency of drug therapy; testing of the enantiomeric purity of pharmaceutical products; the use of novel materials as components of stationary and pseudo-stationary phases in capillary electrophoresis and capillary electrochromatography to increase the selectivity of separation of components of complex matrices; and identification of various on-line preconcentration techniques to reduce the detection limits of biologically active analytes. A topical trend in capillary electrophoresis required in clinical practice, viz., the design of microfluidic systems, is discussed. The bibliography includes 173 references.

  14. Electrophoretic fingerprinting of benzodiazepine tablets in spike drinks. (United States)

    Sáiz, Jorge; Ortega-Ojeda, Fernando; López-Melero, Lucía; Montalvo, Gema; García-Ruiz, Carmen


    Over the last few years, there has been an increase in the reports of drug-facilitated crimes. The list of drugs associated with these crimes is extensive and benzodiazepines constitute one of the groups of substances more commonly used. The sedative properties, which characterize benzodiazepines, are enhanced when such drugs are combined with alcohol, being more attractive for committing these types of crimes. In this work, a capillary electrophoresis method was applied to the analysis of 63 different samples of club drinks spiked with benzodiazepine tablets. The resulting electropherograms were processed and analyzed with the chemometric multivariate techniques: principal component analysis (PCA) and soft independent modeling of class analogies (SIMCA) classification. The PCA results allowed a clear differentiation of each drug class in a 3D plot. In addition, the SIMCA classification model (5% significance level) showed that eight out of nine test samples were automatically assigned by software to their proper sample class. The conflicting sample was correctly classified in the Coomans' plot (95% confidence). This novel approach based on the comparison of electrophoretic profiles of spiked drinks by chemometric tools allows determining the benzodiazepine used for drink spiking without the use of drug standards. Moreover, it provides an opportunity for the forensic laboratories to incorporate the identification capability provided by the electrophoretic fingerprinting of benzodiazepine solutions in existing or new databases. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Nonaqueous capillary electrophoresis of dextromethorphan and its metabolites. (United States)

    Pelcová, Marta; Langmajerová, Monika; Cvingráfová, Eliška; Juřica, Jan; Glatz, Zdeněk


    This study deals with the nonaqueous capillary electrophoretic separation of dextromethorphan and its metabolites using a methanolic background electrolyte. The optimization of separation conditions was performed in terms of the resolution of dextromethorphan and dextrorphan and the effect of separation temperature, voltage, and the characteristics of the background electrolyte were studied. Complete separation of all analytes was achieved in 40 mM ammonium acetate dissolved in methanol. Hydrodynamic injection was performed at 3 kPa for 4 s. The separation voltage was 20 kV accompanied by a low electric current. The ultraviolet detection was performed at 214 nm, the temperature of the capillary was 25°C. These conditions enabled the separation of four analytes plus the internal standard within 9 min. Further, the developed method was validated in terms of linearity, sensitivity, and repeatability. Rat liver perfusate samples were subjected to the nonaqueous capillary electrophoretic method to illustrate its applicability.

  16. Capillary origami


    Py, Charlotte; Reverdy, Paul; Doppler, L.; J. Bico; Roman, B.; Baroud, Charles,


    International audience; The hairs of a wet dog rushing out from a pond assemble into bundles; this is a common example of the effect of capillary forces on flexible structures. From a practical point of the deformation and adhesion of compliant structures induced by interfacial forces may lead to disastrous effects in mechanical microsystems.

  17. Polyacrylamide medium for the electrophoretic separation of biomolecules (United States)

    Madabhushi, Ramakrishna S.; Gammon, Stuart A.


    A polyacryalmide medium for the electrophoretic separation of biomolecules. The polyacryalmide medium comprises high molecular weight polyacrylamides (PAAm) having a viscosity average molecular weight (M.sub.v) of about 675-725 kDa were synthesized by conventional red-ox polymerization technique. Using this separation medium, capillary electrophoresis of BigDye DNA sequencing standard was performed. A single base resolution of .about.725 bases was achieved in .about.60 minute in a non-covalently coated capillary of 50 .mu.m i.d., 40 cm effective length, and a filed of 160 V/cm at C. The resolution achieved with this formulation to separate DNA under identical conditions is much superior (725 bases vs. 625 bases) and faster (60 min. vs. 75 min.) to the commercially available PAAm, such as supplied by Amersham. The formulation method employed here to synthesize PAAm is straight-forward, simple and does not require cumbersome methods such as emulsion polymerizaiton in order to achieve very high molecular weights. Also, the formulation here does not require separation of PAAm from the reaction mixture prior to reconstituting the polymer to a final concentration. Furthermore, the formulation here is prepared from a single average mol. wt. PAAm as opposed to the mixture of two different average mo. wt. PAAm previously required to achieve high resolution.

  18. Capillary electrophoresis combined with microdialysis in the human spinal cord: a new tool for monitoring rapid peroperative changes in amino acid neurotransmitters within the dorsal horn. (United States)

    Parrot, Sandrine; Sauvinet, Valérie; Xavier, Jean-Michel; Chavagnac, Delphine; Mouly-Badina, Laurence; Garcia-Larrea, Luis; Mertens, Patrick; Renaud, Bernard


    A method originally developed for the separation of the three neurotransmitters gamma-aminobutyric acid (GABA), glutamate (Glu) and L-aspartate (L-Asp) in microdialysis samples from rat brain (Sauvinet et al., Electrophoresis 2003, 24, 3187-3196) was applied to human spinal dialysates obtained during peroperative microdialysis from patients undergoing surgery against chronic pain. Molecules were tagged on their primary amine function with the fluorogene agent, naphthalene-2,3-dicarboxaldehyde (NDA), and, after separation by capillary electrophoresis (CE, 75 mmol/L borate buffer, pH 9.2, containing 70 mmol/L sodium dodecyl sulfate and 10 mmol/L hydroxypropyl-beta-cyclodextrin, + 25 kV voltage), were detected by laser-induced fluorescence detection (LIFD) using a 442 nm helium-cadmium laser. The complete method, including microdialysis sampling and analysis by CE-LIFD, has been validated for the analysis of human spinal microdialysates. The analytical detection limits were 1, 3.7 and 17 nmol/L for GABA, Glu and L-Asp respectively. This method allows an accurate measurement of the three amino acid neurotransmitters during an in vivo monitoring performed as rapidly as every minute in the human spinal dorsal horn. In addition, the effect of a brief peroperative electrical stimulation of the dorsal rootlets was investigated. The results obtained illustrate the advantages of combining microdialysis with CE-LIFD for studying neurotransmitters with such a high sampling rate.

  19. Monitoring of threo-methylphenidate enantiomers in oral fluid by capillary electrophoresis with head-column field-amplified sample injection. (United States)

    Theurillat, Regula; Thormann, Wolfgang


    Threo-methylphenidate is a chiral psychostimulant drug widely prescribed to treat attention-deficit hyperactivity disorder in children and adolescents. An enantioselective CE-based assay with head-column field-amplified sample stacking for analysis of threo-methylphenidate enantiomers in liquid/liquid extracts of oral fluid is described. Analytes are electrokinetically injected across a short water plug placed at the capillary inlet and become stacked at the interface between plug and buffer. Enantiomeric separation occurs within a few minutes in a pH 3.0 phosphate/triethanolamine buffer containing 20 mg/mL (2-hydroxypropyl)-β-CD as chiral selector. The assay with six point multilevel internal calibration provides a linear response for each enantiomer in the 10-200 ng/mL concentration range, is simple, inexpensive, and reproducible, and has an LOQ of 5 ng/mL. It was applied to oral fluid patient samples that were collected up to 12 h after intake of an immediate release tablet and two different extended release formulations with racemic methylphenidate. Drug profiles could thereby be assessed in a stereoselective way. Almost no levorotary threo-methylphenidate enantiomer was detected after intake of the two extended release formulations, whereas this enantiomer was detected during the first 2.5 h after intake of the immediate release preparation. The noninvasive collection of oral fluid is an attractive alternative to plasma for the monitoring of methylphenidate exposure in the pediatric community.

  20. Surface initiated polymerization of a cationic monomer on inner surfaces of silica capillaries: analyte separation by capillary electrophoresis versus polyelectrolyte behavior. (United States)

    Witos, Joanna; Karesoja, Mikko; Karjalainen, Erno; Tenhu, Heikki; Riekkola, Marja-Liisa


    [2-(Methacryloyl)oxyethyl]trimethylammonium chloride was successfully polymerized by surface-initiated atom transfer radical polymerization method on the inner surface of fused-silica capillaries resulting in a covalently bound poly([2-(methacryloyl)oxyethyl]trimethylammonium chloride) coating. The coated capillaries provided in capillary electrophoresis an excellent run-to-run repeatability, capillary-to-capillary and day-to-day reproducibility. The capillaries worked reliably over 1 month with EOF repeatability below 0.5%. The positively charged coated capillaries were successfully applied to the capillary electrophoretic separation of three standard proteins and five β-blockers with the separation efficiencies ranging from 132,000 to 303,000 plates/m, and from 82,000 to 189,000 plates/m, respectively. In addition, challenging high- and low-density lipoprotein particles could be separated. The hydrodynamic sizes of free polymer chains in buffers used in the capillary electrophoretic experiments were measured for the characterization of the coatings.

  1. Electrophoretic mobilities of erythrocytes in various buffers (United States)

    Plank, L. D.; Kunze, M. E.; Todd, P. W.


    The calibration of space flight equipment depends on a source of standard test particles, this test particle of choice is the fixed erythrocyte. Erythrocytes from different species have different electrophoretic mobilities. Electrophoretic mobility depends upon zeta potential, which, in turn depends upon ionic strength. Zeta potential decreases with increasing ionic strength, so cells have high electrophoretic mobility in space electrophoresis buffers than in typical physiological buffers. The electrophoretic mobilities of fixed human, rat, and rabbit erythrocytes in 0.145 M salt and buffers of varying ionic strength, temperature, and composition, to assess the effects of some of the unique combinations used in space buffers were characterized. Several effects were assessed: glycerol or DMSO (dimethylsulfoxide) were considered for use as cryoprotectants. The effect of these substances on erythrocyte electrophoretic mobility was examined. The choice of buffer depended upon cell mobility. Primary experiments with kidney cells established the choice of buffer and cryoprotectant. A nonstandard temperature of EPM in the suitable buffer was determined. A loss of ionic strength control occurs in the course of preparing columns for flight, the effects of small increases in ionic strength over the expected low values need to be evaluated.

  2. High temporal resolution for in vivo monitoring of neurotransmitters in awake epileptic rats using brain microdialysis and capillary electrophoresis with laser-induced fluorescence detection. (United States)

    Parrot, Sandrine; Sauvinet, Valérie; Riban, Véronique; Depaulis, Antoine; Renaud, Bernard; Denoroy, Luc


    A method for high temporal resolution monitoring of five neurotransmitters, dopamine (DA), noradrenaline (NA), gamma-aminobutyric acid (GABA), glutamate (Glu), l-aspartate (L-Asp), in freely-moving rats using microdialysis and capillary electrophoresis with laser-induced fluorescence detection (CE-LIFD) was developed. An on-line device, including microdialysis and derivatization with naphthalene-2,3-dicarboxaldehyde, mixes the dialysate with derivatization reagents directly in the collection tube, i.e. with no reactor. Thereafter, collected derivatized samples are analyzed off-line with an automated CE system coupled to a LIFD using a 442 nm excitation. The sampling time was limited by the minimal volume required for the analysis by the automated CE system used: neurotransmitters could be determined in 667 nl dialysates (940 nl after derivatization), i.e. in samples collected every 20 s with a flow rate of 2 microl/min. The detection limits at the dialysis probe were 3 x 10(-9), 1 x 10(-9), 1.9 x 10(-8), 4.2 x 10(-7), 2.1 x 10(-7) mol/l for DA, NA, GABA, Glu and L-Asp, respectively. The protocol was validated using in vitro/in vivo tests and the performances--repeatability, linearity, characteristics of the probes--were determined. Finally, the high temporal resolution allowed the simultaneous monitoring of these neurotransmitters in rats with genetic absence epilepsy and revealed, for the first time, increases in GABA concentrations concomitantly with the seizures, detected when our new microdialysis method was combined to electroencephalographic recordings.

  3. In-capillary derivatization and capillary electrophoresis separation of amino acid neurotransmitters from brain microdialysis samples. (United States)

    Denoroy, Luc; Parrot, Sandrine; Renaud, Louis; Renaud, Bernard; Zimmer, Luc


    A new in-capillary derivatization method with naphtalene-2,3-dicarboxyaldehyde (NDA)/CN(-) has been developed for capillary electrophoresis with laser-induced fluorescence detection of brain microdialysate amino acids. Samples are sandwiched between two plugs of reagent mixture at the capillary inlet and subsequently separated. Highest derivatization yields are obtained by using a reagent to sample plug length ratio equal to 4, performing a first electrophoretic mixing followed by a zero potential amplification step before applying the separation voltage and using a NaCN to NDA concentration ratio equal to 1. This new single-step methodology allows the analysis of amino acid neurotransmitters in rat brain microdialysis samples.

  4. Electrophoretic karyotypes of some related Mucor species. (United States)

    Nagy, A; Palagyi, Z; Vastag, M; Ferenczy, L; Vágvölgyi, C


    Contour clamped homogeneous electric field (CHEF) gel electrophoresis was used to obtain electrophoretic karyotypes from nine Mucor strains representing five different species (M. bainieri, M. circinelloides, M. mucedo, M. plumbeus and M. racemosus). The chromosomal banding patterns revealed high variability among the isolates. The sizes of the DNA in the Mucor chromosomes were estimated to be between 2.5 and 8.7 Mb. The total genome sizes were calculated to be between 30.0 and 44.7 Mb. The applicability of these electrophoretic karyotypes for the investigation of genome structure, for strain identification and for species delimitation is considered.

  5. Gold nanoparticles deposited capillaries for in-capillary microextraction capillary zone electrophoresis of monohydroxy-polycyclic aromatic hydrocarbons. (United States)

    Wang, Huiyong; Knobel, Gaston; Wilson, Walter B; Calimag-Williams, Korina; Campiglia, Andres D


    This article presents the first application of gold nanoparticles deposited capillaries as pre-concentration devices for in-capillary microextraction CZE and their use for the analysis of monohydroxy-polycyclic aromatic hydrocarbons in synthetic urine samples. The successful separation of 1-hydroxypyrene, 9-hydroxyphenanthrene, 3-hydroxybenzo[a]pyrene (3-OHbap), 4-hydroxybenzo[a]pyrene and 5-hydroxybenzo[a]pyrene under a single set of electrophoretic conditions is demonstrated as well as the feasibility to obtain competitive ultraviolet absorption LOD with commercial instrumentation. Enrichment factors ranging from 87 (9-OHphe) to 100 (3-OHbap) made it possible to obtain LOD ranging from 9 ng/mL (9-OHphe and 3-OHbap) to 14 ng/mL (4-hydroxybenzo[a]pyrene).

  6. Theory of Cast Formation in Electrophoretic Deposition

    NARCIS (Netherlands)

    Biesheuvel, P. Maarten; Verweij, Henk


    The rate of cast formation in electrophoretic deposition is described by a combination of the equation of continuity for the suspension phase with expressions for the particle velocity and the movement of the cast-suspension boundary. The assumptions necessary to arrive at the well-known equations o

  7. Assessment of an expert system for the automated validation of electrophoretic profiles. (United States)

    Dorizzi, Romolo M; Zanardi, Valerio; Agnoletti, Riziero; Alberelli, Anna; Babini, Alessandra; De Vita, Paolo


    The Core-lab of the Greater Romagna Area Hub Laboratory carries out about 250,000 capillary electrophoresis assays/year. The huge workload demands the assessing of an Experimental Expert System (EES) capable to sort out the negative samples. Capillarys 2 analyzer has been employed coupled with an EES (based on five simple rules) integrated with the electrophoretic test management software PhoresisCore for assessing the entire workload of a week (5,683 samples). The classification was compared with that of two expert laboratorians. The expert system automatically classified 2974 profiles as negative and no positive samples were erroneously classified as negative (negative predictive value: 100%). The EES sensitivity was 100% and the FTE required for the validation was reduced from 1.26 to 0.63. The EES could be easily implemented in routine activity embedded in a middleware or directly running in the analyzer improving the workflow.

  8. 21 CFR 864.7440 - Electrophoretic hemoglobin analysis system. (United States)


    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Electrophoretic hemoglobin analysis system. 864....7440 Electrophoretic hemoglobin analysis system. (a) Identification. An electrophoretic hemoglobin... hemoglobin types as an aid in the diagnosis of anemia or erythrocytosis (increased total red cell mass)...

  9. Nitromethane as solvent in capillary electrophoresis. (United States)

    Subirats, Xavier; Porras, Simo P; Rosés, Martí; Kenndler, Ernst


    Nitromethane has several properties that make it an interesting solvent for capillary electrophoresis especially for lipophilic analytes that are not sufficiently soluble in water: freezing and boiling points are suitable for laboratory conditions, low viscosity leads to favourable electrophoretic mobilities, or an intermediate dielectric constant enables dissolution of electrolytes. In the present work we investigate the change of electrophoretically relevant analyte properties - mobilities and pKa values - in nitromethane in dependence on the most important experimental conditions determined by the background electrolyte: the ionic strength, I, and the pH. It was found that the mobility decreases with increasing ionic strength (by, e.g. up to 30% from I = 0 to 50 mmol/L) according to theory. An appropriate pH scale is established by the aid of applying different concentration ratios of a buffer acid with known pKa and its conjugate base. The mobility of the anionic analytes (from weak neutral acids) depends on the pH with the typical sigmoidal curve in accordance with theory. The pKa of neutral acids derived from these curves is shifted by as much as 14 pK units in nitromethane compared to water. Both findings confirm the agreement of the electrophoretic behaviour of the analytes with theories of electrolyte solutions. Separation of several neutral analytes was demonstrated upon formation of charged complexes due to heteroconjugation with chloride as ionic constituent of the background electrolyte.

  10. Classification of electrophoretic registers from meningitis contaminated rats

    Directory of Open Access Journals (Sweden)

    Luis E Mendoza


    Full Text Available This paper proposes a new method for classification of Capillary Electrophoretic Registers (CER retrieved from cerebrospinal fluid sample taken from meningitis contaminated rats. The proposed approach applies several signal processing tools such as, wavelet analysis (WA, dynamic programming, principal component analysis (PCA and support vector machines (SVM, for data pre-processing, feature extraction and CER classification. Furthermore, an algorithm is developed that detects zones in the CER where local energy variations between study groups (meningitis group and control group are observed. This algorithm help us to identify the effects that Kliebsella Pneumonie (KP bacteria produce in certain substances (aminoacids that are part of the cerebrospinal fluid samples. It is shown that Meningitis disease can be effectively detected, analyzing the CER with the proposed methods. Futhermore, we show that exploiting the information related to the local energy variation improves the classification correctness rate up to 97.3%. This classification performance is obtained using least square SVM (LS-SVM as classification tools and the parameterized CER representation proposed in this paper.

  11. Leukocytes in capillary flow. (United States)

    Schmid-Schönbein, G W; Lee, J


    During disease, the flow of blood cells through the capillary network is one of the most perilous events in the microcirculation. Capillary distensibility, cytoplasmic activity of endothelial cells, red cells and leukocytes play an important role in capillary perfusion. Occlusion of capillaries is one of the early signs of vascular failure and is encountered in many different conditions and organs. Adhesion of leukocytes to the endothelium via expression of membrane adhesion molecules leads to microvascular entrapment with capillary occlusion.

  12. Diamond electrophoretic microchips-Joule heating effects

    Energy Technology Data Exchange (ETDEWEB)

    Karczemska, Anna T., E-mail: [Technical University of Lodz, Institute of Turbomachinery, 219/223 Wolczanska str., Lodz (Poland); Witkowski, Dariusz [Technical University of Lodz, Institute of Turbomachinery, 219/223 Wolczanska str., Lodz (Poland); Ralchenko, Victor, E-mail: [General Physics Institute, Russian Academy of Science, 38 Vavilov str., Moscow (Russian Federation); Bolshakov, Andrey; Sovyk, Dmitry [General Physics Institute, Russian Academy of Science, 38 Vavilov str., Moscow (Russian Federation); Lysko, Jan M., E-mail: [Institute of Electron Technology, Al. Lotnikow 32/46, 02-668 Warsaw (Poland); Fijalkowski, Mateusz, E-mail: [Technical University of Liberec, Faculty of Mechanical Engineering (Czech Republic); Bodzenta, Jerzy, E-mail: [Silesian University of Technology, Institute of Physics, 2 Krzywoustego str., 44-100 Gliwice (Poland); Hassard, John, E-mail: [Imperial College of Science, Technology and Medicine, London (United Kingdom)


    Microchip electrophoresis (MCE) has become a mature separation technique in the recent years. In the presented research, a polycrystalline diamond electrophoretic microchip was manufactured with a microwave plasma chemical vapour deposition (MPCVD) method. A replica technique (mould method) was used to manufacture microstructures in diamond. A numerical analysis with CoventorWare{sup TM} was used to compare thermal properties during chip electrophoresis of diamond and glass microchips of the same geometries. Temperature distributions in microchips were demonstrated. Thermal, electrical, optical, chemical and mechanical parameters of the polycrystalline diamond layers are advantageous over traditionally used materials for microfluidic devices. Especially, a very high thermal conductivity coefficient gives a possibility of very efficient dissipation of Joule heat from the diamond electrophoretic microchip. This enables manufacturing of a new generation of microdevices.

  13. Electrochemical Enzyme Immunoassay of Tumor Marker CA15-3 with Capillary Electrophoresis

    Institute of Scientific and Technical Information of China (English)


    Tumor marker CA15-3 was determined by using capillary electrophoretic enzyme immunoassay with electrochemical detection (CE-EIA-ED). The method can be used to detect CA15-3 with a limit of 0.024 U/mL.

  14. A unified mathematical theory of electrophoretic processes (United States)

    Bier, M.; Palusinski, O. A.; Mosher, R. A.; Graham, A.; Saville, D. A.


    A mathematical theory is presented which shows that each of the four classical electrophoretic modes (zone electrophoresis, moving boundary electrophoresis, isotachophoresis, and isoelectric focusing) is based on the same general principles and can collectively be described in terms of a single set of equations. This model can predict the evolution of the four electrophoretic modes as a function of time. The model system is one-dimensional, neglecting the effects of electroosmosis, temperature gradients, and any bulk flows of liquid. The model is based on equations which express the components' dissociation equilibria, the mass transport due to electromigration and diffusion, electroneutrality, and the conservation of mass and charge. The model consists of a system of coupled partial differential and nonlinear algebraic equations which can be solved numerically by use of a computer. The versatility of this model was verified using an example of a three-component system containing cacodylate, tris hydroxylmethylaminomethane, and histidine. Results show that this model not only correctly predicts the characteristic features of each electrophoretic mode, but also gives details of the concentration, pH, and conductivity profiles not easily amenable to direct experimental measurement.

  15. Methods of analysis by the U. S. Geological Survey National Water Quality Laboratory - determination of organonitrogen herbicides in water by solid-phase extraction and capillary-column gas chromatography/mass spectrometry with selected-ion monitoring (United States)

    Sandstrom, Mark W.; Wydoski, Duane S.; Schroeder, Michael P.; Zamboni, Jana L.; Foreman, William T.


    A method for the isolation of organonitrogen herbicides from natural water samples using solid-phase extraction and analysis by capillary-column gas chromatography/mass spectrometry with selected-ion monitoring is described. Water samples are filtered to remove suspended particulate matter and then are pumped through disposable solid-phase extraction cartridges containing octadecyl-bonded porous silica to remove the herbicides. The cartridges are dried using carbon dioxide, and adsorbed herbicides are removed from the cartridges by elution with 1.8 milliliters of hexaneisopropanol (3:1). Extracts of the eluants are analyzed by capillary-column gas chromatography/mass spectrometry with selected-ion monitoring of at least three characteristic ions. The method detection limits are dependent on sample matrix and each particular herbicide. The method detection limits, based on a 100-milliliter sample size, range from 0.02 to 0.25 microgram per liter. Recoveries averaged 80 to 115 percent for the 23 herbicides and 2 metabolites in 1 reagent-water and 2 natural-water samples fortified at levels of 0.2 and 2.0 micrograms per liter.

  16. Separation of Proteins by Electrophoretic Affinity Chromatography

    Institute of Scientific and Technical Information of China (English)

    邺韶骅; 刘铮; 丁富新; 袁乃驹


    A new kind of electrophoretic affinity chromatography (EAC) for bioseparation was proposed,Separation by EAC was conducted in a multicompartment electrolyzer in which the affinity gel media were packed in one of the central compartments.The presence of an electric field accelerated the migration of proteins inside the gel matrix during adsorption and descrption processes,This led to the increase of the overall speed of separation,The present study was focused on the effect of the strength of the electric field on adsorption and desorption processes.

  17. Physico-chemical characterization of liposomes and drug substance-liposome interactions in pharmaceutics using capillary electrophoresis and electrokinetic chromatography

    DEFF Research Database (Denmark)

    Franzen, Ulrik; Østergaard, Jesper


    Liposomes are self-assembled phospholipid vesicles and have numerous research and therapeutic applications. In the pharmaceutical and biomedical sciences liposomes find use as models of biological membranes, partitioning medium and as drug carriers. The present review addresses the use of capillary...... electrophoresis and liposome electrokinetic chromatography for the characterization of liposomes in a pharmaceutical context. Capillary electrophoretic techniques have been used for the measurement of electrophoretic mobility, which provides information on liposome surface charge, size and membrane permeability...... of liposomes. The use of liposome electrokinetic chromatography and capillary electrophoresis for determination of liposome/water partitioning and characterization of drug-liposome interactions is reviewed. A number of studies indicate that capillary electrophoresis may have a role in the characterization...

  18. A simple method for assessment and minimization of errors in determination of electrophoretic or electroosmotic mobilities and velocities associated with the axial electric field distortion. (United States)

    Nowak, Paweł Mateusz; Woźniakiewicz, Michał; Kościelniak, Paweł


    It is commonly accepted that the modern CE instruments equipped with efficient cooling system enable accurate determination of electrophoretic or electroosmotic mobilities. It is also often assumed that velocity of migration in a given buffer is constant throughout the capillary length. It is simultaneously neglected that the noncooled parts of capillary produce extensive Joule heating leading to an axial electric field distortion, which contributes to a difference between the effective and nominal electric field potentials and between velocities in the cooled and noncooled parts of capillary. This simplification introduces systematic errors, which so far were however not investigated experimentally. There was also no method proposed for their elimination. We show a simple and fast method allowing for estimation and elimination of these errors that is based on combination of a long-end and short-end injections. We use it to study the effects caused by variation of temperature, electric field, capillary length, and pH.

  19. Electrophoretic mobilities of dissolved polyelectrolyte charging agent and suspended non-colloidal titanium during electrophoretic deposition

    Energy Technology Data Exchange (ETDEWEB)

    Lau, Kok-Tee [School of Materials Science and Engineering, University of New South Wales, Sydney, NSW 2052 (Australia); Faculty of Manufacturing Engineering, Universiti Teknikal Malaysia Melaka, 76109 Durian Tunggal, Melaka (Malaysia); Sorrell, C.C., E-mail: [School of Materials Science and Engineering, University of New South Wales, Sydney, NSW 2052 (Australia)


    Coarse ({<=}20 {mu}m) titanium particles were deposited on low-carbon steel substrates by cathodic electrophoretic deposition (EPD) with ethanol as suspension medium and poly(diallyldimethylammonium chloride) (PDADMAC) as polymeric charging agent. Preliminary data on the electrophoretic mobilities and electrical conductivities on the suspensions of these soft particles as well as the solutions themselves as a function of PDADMAC level were used as the basis for the investigation of the EPD parameters in terms of the deposition yield as a function of five experimental parameters: (a) PDADMAC addition level, (b) solids loading, (c) deposition time, (d) applied voltage, and (e) electrode separation. These data were supported by particle sizing by laser diffraction and deposit surface morphology by scanning electron microscopy (SEM). The preceding data demonstrated that Ti particles of {approx}1-12 {mu}m size, electrosterically modified by the PDADMAC charging agent, acted effectively as colloidal particles during EPD. Owing to the non-colloidal nature of the particles and the stabilization of the Ti particles by electrosteric forces, the relevance of the zeta potential is questionable, so the more fundamental parameter of electrophoretic mobility was used. A key finding from the present work is the importance of assessing the electrophoretic mobilities of both the suspensions and solutions since the latter, which normally is overlooked, plays a critical role in the ability to interpret the results meaningfully. Further, algebraic uncoupling of these data plus determination of the deposit yield as a function of charging agent addition allow discrimination between the three main mechanistic stages of the electrokinetics of the process, which are: (1) surface saturation; (2) compression of the diffuse layer, growth of polymer-rich layer, and/or competition between the mobility of Ti and PDADMAC; and (3) little or no decrease in electrophoretic mobility of Ti

  20. Flow counterbalanced capillary electrophoresis using packed capillary columns: resolution of enantiomers and isotopomers. (United States)

    Henley, W Hampton; Wilburn, Richard T; Crouch, Andrew M; Jorgenson, James W


    A method with the ability to increase greatly both the resolution and efficiency of a given capillary electrophoretic system is described. This method differs from traditional capillary electrophoresis (CE) in that a counterflow is induced in the direction opposite to the electrokinetic migration of the analyte. This has the effect of extending not only the time the analytes migrate in the electric field but also the effective length and the effective applied voltage of the system. Previous work in our group with flow counterbalanced capillary electrophoresis has utilized an open tube of small inner diameter to reduce peak broadening caused by hydrodynamic flow. Narrow-diameter capillaries (5-10 microm) restricted analysis to fluorescent analytes and laser-induced fluorescence detection. The method described here uses a capillary of much larger inner diameter (75 microm) that has been packed with nonporous silica particles. The packing material reduces the amount of band broadening caused by pressure-induced flow relative to that experienced in an open tube. A larger diameter capillary allows the detection of analytes by UV absorption, not only eliminating the need to tag analytes with fluorescent tags but also allowing for the detection of a much broader range of analytes. The system was evaluated by studying the separations of several enantiomers using only beta-cyclodextrin as the chiral selector. The system was also used to resolve the two naturally occurring isotopes of bromine and to resolve phenylalanine from phenylalanine-d8. Relative to traditional CE, large improvements in resolution and separation efficiency have been achieved with this method.

  1. Cyclic electrophoretic and chromatographic separation methods

    NARCIS (Netherlands)

    Eijkel, Jan C.T.; Berg, van den Albert; Manz, Andreas


    A review is given of the application of cyclic analytical methods in capillary electroseparation (CE) and liquid chromatography (LC) systems. Cyclic methods have been used since the early sixties in chromatographic systems to overcome pressure limitations to resolution. From the early nineties on th

  2. Applications of graphene electrophoretic deposition. A review. (United States)

    Chavez-Valdez, A; Shaffer, M S P; Boccaccini, A R


    This Review summarizes research progress employing electrophoretic deposition (EPD) to fabricate graphene and graphene-based nanostructures for a wide range of applications, including energy storage materials, field emission devices, supports for fuel cells, dye-sensitized solar cells, supercapacitors and sensors, among others. These carbonaceous nanomaterials can be dispersed in organic solvents, or more commonly in water, using a variety of techniques compatible with EPD. Most deposits are produced under constant voltage conditions with deposition time also playing an important role in determining the morphology of the resulting graphene structures. In addition to simple planar substrates, it has been shown that uniform graphene-based layers can be deposited on three-dimensional, porous, and even flexible substrates. In general, electrophoretically deposited graphene layers show excellent properties, e.g., high electrical conductivity, large surface area, good thermal stability, high optical transparency, and robust mechanical strength. EPD also enables the fabrication of functional composite materials, e.g., graphene combined with metallic nanoparticles, with other carbonaceous materials (e.g., carbon nanotubes) or polymers, leading to novel nanomaterials with enhanced optical and electrical properties. In summary, the analysis of the available literature reveals that EPD is a simple and convenient processing method for graphene and graphene-based materials, which is easy to apply and versatile. EPD has, therefore, a promising future for applications in the field of advanced nanomaterials, which depend on the reliable manipulation of graphene and graphene-containing systems.

  3. Contactless conductometric determination of methanol and ethanol in samples containing water after their electrophoretic desalination. (United States)

    Tůma, Petr; Opekar, František


    Determination of the contents of methanol and ethanol in aqueous solutions was performed by measuring the permittivity of solutions using a contactless conductivity detector (C(4) D) normally used for detection in capillary electrophoresis. The detection cell is a section of a fused silica capillary with an internal diameter of 50 μm with a pair of conductivity electrodes on the external walls. The C(4) D response to samples of methanol/water and ethanol/water mixtures is linear in the concentration interval of approx. 40-100% v/v alcohol content. In the analysis of technical samples of methanol and ethanol, the determination is disturbed by the presence of even trace amounts of salts. This interference can be effectively eliminated by integrated electrophoretic desalination of the sample by the application of a direct current electric voltage with a magnitude of 10 kV to the capillary with the injected sample zone. Under these conditions, the ions migrate out of the sample zone and the detector response is controlled purely by the permittivity of the solvent/water zone. Desalinating is effective for NaCl contents in the range from 0 to 5 mmol/L NaCl. The effectiveness of the desalinating process has been verified on MeOH/water samples and in determination of the ethanol content in distilled beverages normally available in the retail network.

  4. Using Electrophoretic Mobility Shift Assays to Measure Equilibrium Dissociation Constants: GAL4-p53 Binding DNA as a Model System (United States)

    Heffler, Michael A.; Walters, Ryan D.; Kugel, Jennifer F.


    An undergraduate biochemistry laboratory experiment is described that will teach students the practical and theoretical considerations for measuring the equilibrium dissociation constant (K[subscript D]) for a protein/DNA interaction using electrophoretic mobility shift assays (EMSAs). An EMSA monitors the migration of DNA through a native gel;…

  5. Electrophoretic separation of lunar soils in a space manufacturing facility (United States)

    Dunning, J. D.; Snyder, R. S.


    The feasibility of electrophoretic separation of lunar soil into its mineral constituents is discussed in this paper. The process and its applicability to lunar soil separation are considered in light of the special requirements of a space manufacturing effort. Data generated in studies at NASA-Marshall Space Flight Center, which assess the efficiency of electrophoretic separation of lunar soil, are discussed and evaluated.

  6. An experimental design based strategy to optimize a capillary electrophoresis method for the separation of 19 polycyclic aromatic hydrocarbons. (United States)

    Ferey, Ludivine; Delaunay, Nathalie; Rutledge, Douglas N; Huertas, Alain; Raoul, Yann; Gareil, Pierre; Vial, Jérôme; Rivals, Isabelle


    Because of their high toxicity, international regulatory institutions recommend monitoring specific polycyclic aromatic hydrocarbons (PAHs) in environmental and food samples. A fast, selective and sensitive method is therefore required for their quantitation in such complex samples. This article deals with the optimization, based on an experimental design strategy, of a cyclodextrin (CD) modified capillary zone electrophoresis separation method for the simultaneous separation of 19 PAHs listed as priority pollutants. First, using a central composite design, the normalized peak-start and peak-end times were modelled as functions of the factors that most affect PAH electrophoretic behavior: the concentrations of the anionic sulfobutylether-β-CD and neutral methyl-β-CD, and the percentage of MeOH in the background electrolyte. Then, to circumvent computational difficulties resulting from the changes in migration order likely to occur while varying experimental conditions, an original approach based on the systematic evaluation of the time intervals between all the possible pairs of peaks was used. Finally, a desirability analysis based on the smallest time interval between two consecutive peaks and on the overall analysis time, allowed us to achieve, for the first time in CE, full resolution of all 19 PAHs in less than 18 min. Using this optimized capillary electrophoresis method, a vegetable oil was successfully analyzed, proving its suitability for real complex sample analysis.

  7. Separation of ions in acidic solution by capillary electrophoresis

    Energy Technology Data Exchange (ETDEWEB)

    Thornton, M.


    Capillary electrophoresis (CE) is an effective method for separating ionic species according to differences in their electrophoretic mobilities. CE separations of amino acids by direct detection are difficult due to their similar electrophoretic mobilities and low absorbances. However, native amino acids can be separated by CE as cations at a low pH by adding an alkanesulfonic acid to the electrolyte carrier which imparts selectivity to the system. Derivatization is unnecessary when direct UV detection is used at 185 nm. Simultaneous speciation of metal cations such as vanadium (IV) and vanadium (V) can easily be performed without complexation prior to analysis. An indirect UV detection scheme for acidic conditions was also developed using guanidine as the background carrier electrolyte (BCE) for the indirect detection of metal cations. Three chapters have been removed for separate processing. This report contains introductory material, references, and general conclusions. 80 refs.

  8. Capillary Electrophoresis as Analysis Technique for Battery Electrolytes: (i Monitoring Stability of Anions in Ionic Liquids and (ii Determination of Organophosphate-Based Decomposition Products in LiPF6-Based Lithium Ion Battery Electrolytes

    Directory of Open Access Journals (Sweden)

    Marcelina Pyschik


    Full Text Available In this work, a method for capillary electrophoresis (CE hyphenated to a high-resolution mass spectrometer was presented for monitoring the stability of anions in ionic liquids (ILs and in commonly used lithium ion battery (LIB electrolytes. The investigated ILs were 1-methyl-1-propylpyrrolidinium bis(trifluoromethanesulfonylimide (PYR13TFSI and 1-methyl-1-propylpyrrolidinium bis(fluorosulfonylimide (PYR13FSI. The method development was conducted by adjusting the following parameters: buffer compositions, buffer concentrations, and the pH value. Also the temperature and the voltage applied on the capillary were optimized. The ILs were aged at room temperature and at 60 °C for 16 months each. At both temperatures, no anionic decomposition products of the FSI− and TFSI− anions were detected. Accordingly, the FSI− and TFSI− anions were thermally stable at these conditions. This method was also applied for the investigation of LIB electrolyte samples, which were aged at 60 °C for one month. The LP30 (50/50 wt. % dimethyl carbonate/ethylene carbonate and 1 M lithium hexafluorophosphate electrolyte was mixed with the additive 1,3-propane sultone (PS and with one of the following organophosphates (OP: dimethyl phosphate (DMP, diethyl phosphate (DEP, and triethyl phosphate (TEP, to investigate the influence of these compounds on the formation of OPs.

  9. Monitoring compliance to therapy during addiction treatments by means of hair analysis for drugs and drug metabolites using capillary zone electrophoresis coupled to time-of-flight mass spectrometry. (United States)

    Gottardo, Rossella; Fanigliulo, Ameriga; Sorio, Daniela; Liotta, Eloisa; Bortolotti, Federica; Tagliaro, Franco


    Capillary electrophoresis coupled to time-of-flight mass spectrometry was used in the present work for the determination of therapeutic and abused drugs and their metabolites in the hair of subjects undergoing addiction treatments, in order to monitor their compliance to therapy. For this purpose a rapid, qualitative drug screening method was adopted based on capillary electrophoresis hyphenated with time-of-flight mass spectrometry, which had earlier been developed and validated for the forensic-toxicological analysis of hair, limitedly to illicit/abused drugs [1]. Sampling of hair was carried out in order to refer to a time window of about two months from the date of sampling (i.e. 2cm ca. from cortex). A single extraction procedure was applied, allowing the determination in the hair matrix of "drugs of abuse" referred to the past abuses, and therapeutic drugs prescribed in the detoxification program as well as their metabolites. Analyte identification was based on accurate mass measurements and comparison of isotope patterns, providing the most likely matching between accurate mass value and elemental formula. Small molecules (forensic and toxicological interest could be identified unambiguously using mass spectrometric conditions tailored to meet a mass accuracy ≤5ppm. In the present study, the proposed approach proved suitable for the rapid broad spectrum screening of hair samples, although needing further confirmation of results by using fragmentation mass spectrometry.

  10. Unilateral NMR: a Noninvasive Tool for Monitoring In Situ the Effectiveness of Intervention to Reduce the Capillary Raise of Water in an Ancient Deteriorated Wall Painting

    Directory of Open Access Journals (Sweden)

    Valeria Di Tullio


    Full Text Available Portable unilateral NMR was used to quantitatively map in a fully noninvasive way the moisture distribution in an ancient deteriorated wall painting before and after an intervention to reduce the capillary raise of water through the wall. Maps obtained at a depth of 0.5 cm clearly showed the path of the capillary raise and indicated that, after the intervention, the moisture level was reduced. Maps obtained by measuring the first layers of the wall painting were affected by the critical environmental conditions of the second hypogeous level of St. Clement Basilica, Rome, and by the presence of salts efflorescence and encrustations on the surface of the wall painting. The morphology and the elemental composition of salts investigated by SEM-EDS indicated that efflorescences and encrustations were mostly constituted of gypsum and calcite. The presence of these salts is explained with the presence of high concentration of carbon dioxide and sulphur-rich particles due to pollution which, along with the high-moisture level and the extremely feeble air circulation, cause recarbonation and sulphation processes on the plaster surface.

  11. Capillary Electrophoresis-nanoelectrospray Ionization-selected Reaction Monitoring Mass Spectrometry Via A True Sheathless Metal-coated Emitter Interface For Robust And High Sensitivity Sample Quantification

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Xuejiang; Fillmore, Thomas L.; Gao, Yuqian; Tang, Keqi


    A new sheathless CITP/CZE-MS interface, based on a commercially available capillary with an integrated metal coated ESI emitter, was developed in this study aiming at overcoming the reproducibility and ruggedness problems, suffered to a certain degree by almost all the available CE-MS interfaces, and pushing the CE-MS technology suitable for routine sample analysis with high sensitivity. The new CITP/CZE-MS interface allows the electric contact between ESI voltage power supply and the CE separation liquid by using a conductive liquid that comes in contact with the metal coated surface of the ESI emitter, making it a true sheathless CE-MS interface. Stable electrospray was established by avoiding the formation of gas bubbles from electro chemical reaction at the emitter tip or inside of the CE capillary. Crucial operating parameters, such as sample loading volume, flow rate, and separation voltage, were systematically evaluated for their effects on both CITP/CZE separation efficiency and MS detection sensitivity. Around one hundred CITP/CZE-MS analyses can be easily achieved by using the new sheathless CITP/CZE interface without a noticeable loss of metal coating on the ESI emitter surface, or degrading of the ESI emitter performance. The reproducibility in analyte migration time and quantitative performance of the new interface was experimentally evaluated to demonstrate a LOQ bellow 5 attomole.

  12. Electrochemically powered self-propelled electrophoretic nanosubmarines (United States)

    Pumera, Martin


    In the past few years, we have witnessed rapid developments in the realization of the old nanotechnology dream, autonomous nanosubmarines. These nanomachines are self-powered, taking energy from their environment by electrocatalytic conversion of chemicals present in the solution, self-propelled by flux of the electrons within the submarine and the hydronium ions on the surface of the nanosub, powering it in the direction opposite to that of the flux of the hydronium. These nanosubmarines are responsive to external fields, able to follow complex magnetic patterns, navigate themselves in complex microfluidic channels, follow chemical gradients, carry cargo, and communicate with each other. This minireview focuses on a discussion of the fundamentals of the electrophoretic mechanism underlying the propulsion of this sort of nanosub, as well as a demonstration of the proof-of-concept capabilities of nanosubmarines.In the past few years, we have witnessed rapid developments in the realization of the old nanotechnology dream, autonomous nanosubmarines. These nanomachines are self-powered, taking energy from their environment by electrocatalytic conversion of chemicals present in the solution, self-propelled by flux of the electrons within the submarine and the hydronium ions on the surface of the nanosub, powering it in the direction opposite to that of the flux of the hydronium. These nanosubmarines are responsive to external fields, able to follow complex magnetic patterns, navigate themselves in complex microfluidic channels, follow chemical gradients, carry cargo, and communicate with each other. This minireview focuses on a discussion of the fundamentals of the electrophoretic mechanism underlying the propulsion of this sort of nanosub, as well as a demonstration of the proof-of-concept capabilities of nanosubmarines. In memory of Karel Zeman, Czech animator, who encouraged thousands of young people into science and technology, on the occasion of the 100th

  13. Determination of vanillin in vanilla perfumes and air by capillary electrophoresis. (United States)

    Minematsu, Saaya; Xuan, Guang-Shan; Wu, Xing-Zheng


    The present study investigated capillary electrophoretic detection of vanillin in vanilla perfume and air. An UV-absorbance detector was used in a home-made capillary electrophoretic instrument. A fused silica capillary (outer diameter: 364 μm, inner diameter: 50 μm) was used as a separation capillary, and a high electric voltage (20 kV) was applied across the two ends of the capillary. Total length of the capillary was 70 cm, and the effective length was 55 cm. Experimental results showed that the vanillin peak was detected at about 600, 450, and 500 seconds when pH of running buffers in CE were 7.2, 9.3, and 11.5, respectively. The peak area of vanillin was proportional to its concentration in the range of 0-10(-2) mol/L. The detection limit was about 10(-5) mol/L. Vanillin concentration in a 1% vanilla perfume sample was determined to be about 3×10(-4) mol/L, agreed well with that obtained by a HPLC method. Furthermore, determination of vanillin in air by combination of CE and active carbon adsorption method was investigated. Copyright © 2013 The Research Centre for Eco-Environmental Sciences, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.

  14. Fast capillary electrophoresis-time-of-flight mass spectrometry using capillaries with inner diameters ranging from 75 to 5 μm. (United States)

    Grundmann, Marco; Matysik, Frank-Michael


    Fast electrophoretic separations in fused silica capillaries (CE) coupled to time-of-flight mass spectrometry (TOF-MS) are presented. CE separations of the model analytes (epinephrine, norepinephrine, dopamine, histidine, and isoproterenol) under conditions of high electric field strengths of up to 1.25 kV cm(-1) are completed in 20 s. Coupling of CE with TOF-MS is accomplished using a coaxial sheath liquid electrospray ionization interface. The influence of parameters inherent to the interface and their effects, including suction pressure and dilution, are discussed. In addition to standard capillaries of 75 and 50 μm inner diameter (ID), separations in capillaries with IDs of 25, 15, and 5 μm have been successfully applied to this setup. The analytical performance is compared over this range of capillary dimensions, and both advantages and disadvantages are discussed.

  15. Electrophoretic concentration and sweeping-micellar electrokinetic chromatography analysis of cationic drugs in water samples. (United States)

    Wuethrich, Alain; Haddad, Paul R; Quirino, Joselito P


    Sample preparation by electrophoretic concentration, followed by analysis using sweeping-micellar electrokinetic chromatography, was studied as a green and simple analytical strategy for the trace analysis of cationic drugs in water samples. Electrophoretic concentration was conducted using 50 mmol/L ammonium acetate at pH 5 as acceptor electrolyte. Electrophoretic concentration was performed at 1.0 kV for 50 min and 0.5 kV and 15 min for purified and 10-fold diluted waste water samples, respectively. Sweeping-micellar electrokinetic chromatography was with 100 mmol/L sodium phosphate at pH 2, 100 mmol/L sodium dodecyl sulfate and 27.5%-v/v acetonitrile as separation electrolyte. The separation voltage was -20 kV, UV-detection was at 200 nm, and the acidified concentrate was injected for 36 s at 1 bar (or 72% of the total capillary length, 60 cm). Both purified water and 10-fold diluted waste water exhibited a linear range of two orders of concentration magnitude. The coefficient of determination, and intra- and interday repeatability were 0.991-0.997, 2.5-6.2, and 4.4-9.7%RSD (n=6), respectively, for purified water. The values were 0.991-0.997, 3.4-7.1, and 8.7-9.8%RSD (n=6), correspondingly, for 10-fold diluted waste water. The method detection limit was in the range from 0.04-0.09 to 1.20-6.97 ng/mL for purified and undiluted waste water, respectively.

  16. Intramedullary capillary haemangioma.

    LENUS (Irish Health Repository)

    Kelleher, T


    Intramedullary capillary haemangioma is extremely rare and only four cases have been previously reported. We describe a further case, outlining the clinical, radiological, surgical and pathological features.

  17. Methods of analysis by the U.S. Geological Survey National Water Quality Laboratory; determination of pesticides in water by C-18 solid-phase extraction and capillary-column gas chromatography/mass spectrometry with selected-ion monitoring (United States)

    Zaugg, Steven D.; Sandstrom, Mark W.; Smith, Steven G.; Fehlberg, Kevin M.


    A method for the isolation of 41 pesticides and pesticide metabolites in natural-water samples using C-18 solid-phase extraction and determination by capillary-column gas chromatography/mass spectrometry with selected-ion monitoring is described. Water samples are filtered to remove suspended particulate matter and then are pumped through disposable solid-phase extraction columns containing octadecyl-bonded porous silica to extract the pesticides. The columns are dried using carbon dioxide or nitrogen gas, and adsorbed pesticides are removed from the columns by elution with 3.0 milliliters of hexane-isopropanol (3:1). Extracted pesticides are determined by capillary- column gas chromatography/mass spectrometry with selected-ion monitoring of three characteristic ions. The upper concentration limit is 4 micrograms per liter (g/L) for most pesticides, with the exception of widely used corn herbicides--atrazine, alachlor, cyanazine, and metolachlor--which have upper concentration limits of 20 g/L. Single- operator method detection limits in reagent-water samples range from 0.001 to 0.018 g/L. Average short-term single-operator precision in reagent- water samples is 7 percent at the 0.1- and 1.0-g/L levels and 8 percent at the 0.01-g/L level. Mean recoveries in reagent-water samples are 73 percent at the 0.1- and 1.0-g/L levels and 83 percent at the 0.01-g/L level. The estimated holding time for pesticides after extraction on the solid-phase extraction columns was 7 days. An optional on-site extraction procedure allows for samples to be collected and processed at remote sites where it is difficult to ship samples to the laboratory within the recommended pre-extraction holding time.

  18. Electrophoretically mediated microanalysis for characterization of the enantioselective CYP3A4 catalyzed N-demethylation of ketamine. (United States)

    Ying Kwan, Hiu; Thormann, Wolfgang


    Execution of an enzymatic reaction performed in a capillary with subsequent electrophoretic analysis of the formed products is referred to as electrophoretically mediated microanalysis (EMMA). An EMMA method was developed to investigate the stereoselectivity of the CYP3A4-mediated N-demethylation of ketamine. Ketamine was incubated in a 50 μm id bare fused-silica capillary together with human CYP3A4 Supersomes using a 100 mM phosphate buffer (pH 7.4) at 37°C. A plug containing racemic ketamine and the NADPH regenerating system including all required cofactors for the enzymatic reaction was injected, followed by a plug of the metabolizing enzyme CYP3A4 (500 nM). These two plugs were bracketed by plugs of incubation buffer to ensure proper conditions for the enzymatic reaction. The rest of the capillary was filled with a pH 2.5 running buffer comprising 50 mM Tris, phosphoric acid, and 2% w/v of highly sulfated γ-cyclodextrin. Mixing of reaction plugs was enhanced via application of -10 kV for 10 s. After an incubation of 8 min at 37°C without power application (zero-potential amplification), the capillary was cooled to 25°C within 3 min followed by application of -10 kV for the separation and detection of the formed enantiomers of norketamine. Norketamine formation rates were fitted to the Michaelis-Menten model and the elucidated values for V(max) and K(m) were found to be comparable to those obtained from the off-line assay of a previous study.

  19. Characterization and performance of a neutral hydrophilic coating for the capillary electrophoretic separation of biopolymers. (United States)

    Schmalzing, D; Piggee, C A; Foret, F; Carrilho, E; Karger, B L


    Polyvinylmethylsiloxanediol (50% vinyl) was synthesized and combined with a cross-linker for static coating onto fused-silica columns. After cross-linking and binding to the surface, linear polyacrylamide was grafted to the double bonds of the siloxanediol; subsequently, this linear polymer matrix was cross-linked with formaldehyde. The grafted neutral polymeric layer provided suppression of electroosmotic flow and minimized adsorption. This combination yielded successful open tube and polymer network separations of proteins, peptides and DNA molecules. Very high efficiencies (ca. 1 x 10(6) plates/m) were achieved for open tube protein separations, and hundreds of consecutive runs were performed with minimal change in migration times.

  20. Pulsed-field capillary electrophoresis: optimizing separation parameters with model mixtures of sulfonated polystyrenes. (United States)

    Sudor, J; Novotny, M V


    The electrophoretic transport of high molecular weight charged solutes, both flexible and stiff polymers, has been studied by capillary electrophoresis under constant-field and pulsed-field conditions. Sulfonated polystyrenes were used as model solutes in different entangled polymer solutions. First, changes of the end-to-end distance vectors of flexible polymers were examined through the mobility/potential-gradient curves. Under pulsed-field conditions, the influence of different pulse shapes, frequencies, and amplitudes of forward and backward pulses on the electrophoretic mobilities of model solutes was studied. Resolution of the mixture components was strongly affected by changes in frequency of both sine-wave and square-wave pulses. The experimental results obtained under pulse-field conditions are roughly in agreement with the existing theories of electrophoretic transport.

  1. A Microfluidic Platform for Interfacial Electrophoretic Deposition (United States)

    Joung, Young Soo; Moran, Jeffrey; Jones, Andrew; Bailey, Eric; Buie, Cullen


    Composite membranes of hydrogel and carbon nanotubes (CNTs) are fabricated using electrophoretic deposition (EPD) at the interface of two immiscible liquids in microfluidic channels. Microfluidic channels, which have two parallel electrodes at the walls, are used to create electric fields across the interface of oil and water continuously supplied into the channels. Depending on the Reynolds (Re) and Weber (We) numbers of oil and water, we observe different formations of the interface. Once we find the optimal Re and We to create a planar interface in the channel, we apply an electric field across the interface for EPD of CNTs and/or silver (Ag) nanorods dispersed in water. During EPD, particles migrate to the oil/water interface, where cross-linking of polymers is induced to form composite hydrogel membranes. Properties of the composite hydrogel films are controlled by electric fields, CNT concentrations, and both Re and We numbers, allowing for continuous production. This fabrication method is effective to create composite polymer membranes placed in microfluidic devices with tunable electrical, mechanical, and biological properties. Potential applications include fabrication of doped hydrogels for drug delivery, conductive hydrogels for biological sensing, and electron permeable membranes for water splitting and osmotic power generation.

  2. Microencapsulated Electrophoretic Films for Electronic Paper Displays (United States)

    Amundson, Karl


    Despite the dominance of liquid crystal displays, they do not perform some functions very well. While backlit liquid crystal displays can offer excellent color performance, they wash out in bright lighting and suffer from high power consumption. Reflective liquid crystal displays have limited brightness, making these devices challenging to read for long periods of time. Flexible liquid crystal displays are difficult to manufacture and keep stable. All of these attributes (long battery lifetime, bright reflective appearance, compatibility with flexible substrates) are traits that would be found in an ideal electronic paper display - an updateable substitute for paper that could be employed in electronic books, newspapers, and other applications. I will discuss technologies that are being developed for electronic-paper-like displays, and especially on particle-based technologies. A microencapsulated electrophoretic display technology is being developed at the E Ink corporation. This display film offers offer high brightness and an ink-on-paper appearance, compatibility with flexible substrates, and image stability that can lead to very low power consumption. I will present some of the physical and chemical challenges associated with making display films with high performance.

  3. Potential of capillary electrophoresis mass spectrometry for the characterization and monitoring of amine-derivatized naphthenic acids from oil sands process-affected water. (United States)

    MacLennan, Matthew S; Tie, Cai; Kovalchik, Kevin; Peru, Kerry M; Zhang, Xinxiang; Headley, John V; Chen, David D Y


    Capillary electrophoresis coupled to mass spectrometry (CE-MS) was used for the analysis of naphthenic acid fraction compounds (NAFCs) of oil sands process-affected water (OSPW). A standard mixture of amine-derivatized naphthenic acids is injected directly onto the CE column and analyzed by CE-MS in less than 15min. Time of flight MS analysis (TOFMS), optimized for high molecular weight ions, showed NAFCs between 250 and 800m/z. With a quadrupole mass analyzer, only low-molecular weight NAFCs (between 100 and 450m/z) are visible under our experimental conditions. Derivatization of NAFCs consisted of two-step amidation reactions mediated by 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC), or mediated by a mixture of EDC and N-hydroxysuccinimide, in dimethyl sulfoxide, dichloromethane or ethyl acetate. The optimum background electrolyte composition was determined to be 30% (V/V) methanol in water and 2% (V/V) formic acid. NAFCs extracted from OSPW in the Athabasca oil sands region were used to demonstrate the feasibility of CE-MS for the analysis of NAFCs in environmental samples, showing that the labeled naphthenic acids are in the mass range of 350 to 1500m/z. Copyright © 2016. Published by Elsevier B.V.

  4. Determination of the Median Lethal Dose and Electrophoretic Pattern of Hottentotta saulcyi (Scorpiones, Buthidae Scorpion Venom

    Directory of Open Access Journals (Sweden)

    ErsenAydın Yağmur


    Full Text Available Background: In this study, we investigated the lethal potency, electrophoretic protein pattern and in vivo effects of Hottentotta saulcyi scorpion venom in mice.Methods: Scorpions were collected at night, by using a UV lamp from Mardin Province, Turkey. Venom was obtained from mature H. saulcyi scorpions by electrical stimulation of the telson. The lethality of the venom was determined by i.v. injections using Swiss mice. In vivo effects of the venom were assessed by using the intraperitoneal route (ip injections into mice (20±1g and monitored for 24 h. The protein profiles of the scorpion venom were analyzed by NuPAGE® Novex® 4–12 % gradient Bis-Tris gel followed by Coomassie blue staining.Results: The lethal assay of the venom was 0.73 mg/kg in mice. We determined the electrophoretic protein pattern of this scorpion venom to be 4, 6, 9, 31, 35, 40, 46 and 69 kDa by SDS-PAGE. Analysis of electrophoresis indicated that H. saulcyi scorpion intoxicated mice exhibited autonomic nervous system symptoms (tachypnea, restlessness, hyperexcitability, convulsions, salivation, lacrimation, weakness.Conclusions: Hottentotta saulcyi scorpion venom includes short-chain neurotoxins and long-chain neurotoxins according to the electrophoretic protein patterns. The stings of H. saulcyi scorpion must be considered of risk for humans in the southeastern region, Turkey.

  5. Demonstrating Chemical and Analytical Concepts in the Undergraduate Laboratory Using Capillary Electrophoresis and Micellar Electrokinetic Chromatography (United States)

    Palmer, Christopher P.


    This paper describes instrumental analysis laboratory exercises that utilize capillary electrophoresis and micellar electrokinetic chromatography to demonstrate several analytical and chemical principles. Alkyl parabens (4-hydroxy alkyl benzoates), which are common ingredients in cosmetic formulations, are separated by capillary electrophoresis. The electrophoretic mobilities of the parabens can be explained on the basis of their relative size. 3-Hydroxy ethylbenzoate is also separated to demonstrate the effect of substituent position on the acid dissociation constant and the effect this has on electrophoretic mobility. Homologous series of alkyl benzoates and alkyl phthalates (common plasticizers) are separated by micellar electrokinetic chromatography at four surfactant concentrations. This exercise demonstrates the separation mechanism of micellar electrokinetic chromatography, the concept of chromatographic phase ratio, and the concepts of micelle formation. A photodiode array detector is used in both exercises to demonstrate the advantages and limitations of the detector and to demonstrate the effect of pH and substituent position on the spectra of the analytes.

  6. Enhanced electrophoretic motion using supercapacitor-based energy storage system. (United States)

    Liu, Ran; Wong, Flory; Duan, Wentao; Sen, Ayusman


    Electrophoretic motion at low potentials is facilitated by redox chemistry occurring in a supercapacitor-based electrochemical energy storage system during charge and discharge. We show that MnO2 -modified electrodes can effectively alleviate the electrode surface polarization, the main factor that leads to inefficient electrophoresis at low voltages. A self-powered electrophoretic system based on a discharging battery has been also fabricated.

  7. Fluid mechanics of electroosmotic flow and its effect on band broadening in capillary electrophoresis. (United States)

    Ghosal, Sandip


    Electroosmotic flow (EOF) usually accompanies electrophoretic migration of charged species in capillary electrophoresis unless special precautions are taken to suppress it. The presence of the EOF provides certain advantages in separations. It is an alternative to mechanical pumps, which are inefficient and difficult to build at small scales, for transporting reagents and analytes on microfluidic chips. The downside is that any imperfection that distorts the EOF profile reduces the separation efficiency. In this paper, the basic facts about EOF are reviewed from the perspective of fluid mechanics and its effect on separations in free solution capillary zone electrophoresis is discussed in the light of recent advances.

  8. Principles, Practice, and Evolution of Capillary Electrophoresis as a Tool for Forensic DNA Analysis. (United States)

    Shewale, J G; Qi, L; Calandro, L M


    Capillary electrophoresis (CE) is a versatile and widely used analysis platform with application in diverse areas such as analytical chemistry, chiral separations, clinical, forensics, molecular biology, natural products, organic chemistry, and the pharmaceutical industry. Forensic applications of CE include fragment analysis, DNA sequencing, SNP typing, and analysis of gunshot residues, explosive residues, and drugs. Fragment analysis is a widely used method for short tandem repeat (STR) profiling for human identification (HID) due to the single-base resolution capability of CE. This approach circumvents the tedious and expensive approach of DNA sequencing for STR typing. The high sizing precision, ability to detect fluorescence emitted from multiple dyes, automated electrophoretic runs, and data collection software are key factors in the worldwide adoption of CE as the preferred platform for forensic DNA analysis. The most common CE systems used in forensic DNA analysis include the ABI PRISM® 310, 3100, 3100 Avant, 3130, 3130xl, 3500, and 3500xL Genetic Analyzers (GAs). The 3500 series GAs are developed with features useful for forensic scientists, including a normalization feature for analysis of the data designed to reduce the variation in peak height from instrument to instrument and injection to injection. Other hardware and software features include improved temperature control, radio frequency identification (RFID) tags for monitoring instrument consumables, HID-focused software features, and security and maintenance.

  9. Multiple-capillary measurement of RBC speed, flux, and density with optical coherence tomography. (United States)

    Lee, Jonghwan; Wu, Weicheng; Lesage, Frederic; Boas, David A


    As capillaries exhibit heterogeneous and fluctuating dynamics even during baseline, a technique measuring red blood cell (RBC) speed and flux over many capillaries at the same time is needed. Here, we report that optical coherence tomography can capture individual RBC passage simultaneously over many capillaries located at different depths. Further, we demonstrate the ability to quantify RBC speed, flux, and linear density. This technique will provide a means to monitor microvascular flow dynamics over many capillaries at different depths at the same time.

  10. Understanding local forces in electrophoretic ink systems: utilizing optical tweezers to explore electrophoretic display devices (United States)

    Wei, David L.; Dickinson, Mark R.; Smith, N.; Gleeson, Helen F.


    Optical tweezers can be used as a valuable tool to characterize electrophoretic display (EPD) systems. EPDs are ubiquitous with e-readers and are becoming a commonplace technology where reflective, low-power displays are required; yet the physics of some features crucial to their operation remains poorly defined. We utilize optical tweezers as a tool to understand the motion of charged ink particles within the devices and show that the response of optically trapped electrophoretic particles can be used to characterize electric fields within these devices. This technique for mapping the force can be compared to simulations of the electric field in our devices, thus demonstrating that the electric field itself is the sole governor of the particle motion in an individual-particle regime. By studying the individual-particle response to the electric field, we can then begin to characterize particle motion in `real' systems with many particles. Combining optical tweezing with particle tracking techniques, we can investigate deviations in many particle systems from the single-particle case.


    Directory of Open Access Journals (Sweden)

    Edward Pospiech


    Full Text Available Electrophoretic methods can be used to identify meat of various animal species. The protein electrophoresis, especially the IEF of the sarcoplasmic proteins, is a well-established technique for species identification of raw fish and is used in the control of seafood authenticity. However, in the case of the analysis of heat-processed fish, the method is applicable only to those species which possess characteristic patterns of the heat-stable parvalbumins. Heat-denatured fish muscle proteins may be solubilised by urea or sodium dodecylsulfate (SDS and separated by urea-IEF or SDS-PAGE, respectively. The comparison of these two methods allowed to conclude that, basically, each of them can be used for species identification of heated fishery products. However, extensively washed products may be preferentially analysed by the SDS-PAGE, because most of the parvalbumins are washed out leaving mainly myosins. On the other hand, the IEF method may be preferred for the differentiation of closely related species rich in parvalbumins isoforms. It is evident from the literature data that species-specific protein separations yield proteins of low molecular weight made up of three light chains of myosin (14-23 kDa, troponin (19-30 kDa and parvalbumin (about 12 kDa. Investigations showed that the SDS-PAGE method can be used to identify meats of: cattle, sheep, lambs, goats, red deer and rabbits. The technique allowed researchers to identify the following myofibrillar and sarcoplasmic muscle proteins: myosin and actin, α-actinin, tropomyosin, troponin. SDS-PAGE allowed the identification of myofibrillar proteins taking into account their molecular weights which was not possible with the assistance of the PAGIF because too many protein bands were obtained. It was possible to obtain differences in the separation of proteins characteristic for certain species, e.g. beef, resulting from the presence of sin-gle myofibrillar proteins.

  12. A High Voltage Power Supply That Mitigates Current Reversals in Capillary Zone Electrophoresis-Electrospray Mass Spectrometry (United States)

    Flaherty, Ryan J.; Sarver, Scott A.; Sun, Liangliang; Brownell, Greg A.; Go, David B.; Dovichi, Norman J.


    Capillary electrophoresis coupled with electrospray ionization typically employs two power supplies, one at each end of the capillary. One power supply is located at the proximal (injection) end of the capillary. The power supply located at the distal (detector) end of the capillary drives the electrospray. Electrophoresis is driven by the difference in potential between these power supplies. Separations that employ large capillary inner diameter, high conductivity background electrolyte, and high separation potentials generate higher current than that produced by the electrospray. Excess current flows through the electrospray power supply. Most power supplies are not designed to sink current, and the excess current will cause the electrospray voltage to deviate from its set point. We report a simple circuit to handle this excess current, allowing separations under a wide range of electrophoretic conditions.

  13. Discriminative detection of low-abundance point mutations using a PCR/ligase detection reaction/capillary gel electrophoresis method and fluorescence dual-channel monitoring. (United States)

    Hamada, Mariko; Shimase, Koji; Tsukagoshi, Kazuhiko; Hashimoto, Masahiko


    We applied a facile LIF dual-channel monitoring system recently developed and reported by our group to the polymerase chain reaction/ligase detection reaction/CGE method for detecting low-abundance point mutations present in a wild-type sequence-dominated population. Mutation discrimination limits and signaling fidelity of the analytical system were evaluated using three mutant variations in codon 12 of the K-ras oncogene that have high diagnostic value for colorectal cancer. We demonstrated the high sensitivity of the present method by detecting rare mutations present among an excess of wild-type alleles (one mutation among ~100 normal sequences). This method also simultaneously interrogated the allelic compositions of the test samples with high specificity through spectral discrimination of the dye-tagged ligase detection reaction products using the dual-channel monitoring system. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Simultaneous determination of vigabatrin and amino acid neurotransmitters in brain microdialysates by capillary electrophoresis with laser-induced fluorescence detection. (United States)

    Benturquia, Nadia; Parrot, Sandrine; Sauvinet, Valérie; Renaud, Bernard; Denoroy, Luc


    Capillary electrophoresis with laser-induced fluorescence detection (CE-LIFD) coupled to in vivo microdialysis sampling was used in order to monitor simultaneously a drug and several neurotransmitters in the brain extracellular fluid. Determination of the antiepileptic drug vigabatrin and the amino acid neurotransmitters glutamate (Glu), l-aspartate (l-Asp) and gamma-aminobutyric acid (GABA) was performed on low-concentration samples which were derivatized with naphthalene-2,3-dicarboxaldehyde (NDA) and separated using a pH 9.2 75 mM sodium borate running buffer containing 60 mM sodium dodecyl sulfate (SDS) and 5mM hydroxypropyl-beta-cyclodextrin (HP-beta-CD). Glu, l-Asp and vigabatrin derivatized at a concentration of 1.0 x 10(-9) M, and GABA derivatized at a concentration of 5.0 x 10(-9) M, produced peaks with signal-to-noise ratios of 8:1, 8:1, 4:1 and 5:1, respectively. The nature of the neurotransmitter peaks found in rat brain microdialysates was confirmed by both electrophoretic and pharmacological validations. This method was used for monitoring vigabatrin and amino acid neurotransmitters in microdialysates from the rat striatum during intracerebral infusion of the drug and revealed rapid vigabatrin-induced changes in GABA and Glu levels. This original application of CE-LIFD coupled to microdialysis represents a powerful tool for pharmacokinetic/pharmacodynamic investigations.

  15. Determination of pKa values of tenoxicam from 1H NMR chemical shifts and of oxicams from electrophoretic mobilities (CZE) with the aid of programs SQUAD and HYPNMR. (United States)

    Rodríguez-Barrientos, Damaris; Rojas-Hernández, Alberto; Gutiérrez, Atilano; Moya-Hernández, Rosario; Gómez-Balderas, Rodolfo; Ramírez-Silva, María Teresa


    In this work it is explained, by the first time, the application of programs SQUAD and HYPNMR to refine equilibrium constant values through the fit of electrophoretic mobilities determined by capillary zone electrophoresis experiments, due to the mathematical isomorphism of UV-vis absorptivity coefficients, NMR chemical shifts and electrophoretic mobilities as a function of pH. Then, the pK(a) values of tenoxicam in H(2)O/DMSO 1:4 (v/v) have been obtained from (1)H NMR chemical shifts, as well as of oxicams in aqueous solution from electrophoretic mobilities determined by CZE, at 25 degrees C. These values are in very good agreement with those reported by spectrophotometric and potentiometric measurements.

  16. Simultaneous determination of ammonia, dimethylamine, trimethylamine and trimethylamine-N-oxide in fish extracts by capillary electrophoresis with indirect UV-detection

    DEFF Research Database (Denmark)

    Timm Heinrich, Maike; Jørgensen, Bo


    A capillary electrophoretic method with indirect UV detection is described for simultaneous determination of ammonia, dimethylamine (DMA), trimethylamine (TMA) and trimethylamine-N- oxide (TMAO) in aqueous extracts of fish, A buffer consisting of 4 mM formic acid, 5 mM copper(II)sulfate and 3 m...

  17. Interconverting conformations of variants of the human amyloidogenic protein beta2-microglobulin quantitatively characterized by dynamic capillary electrophoresis and computer simulation

    DEFF Research Database (Denmark)

    Heegaard, Niels H H; Jørgensen, Thomas J D; Cheng, Lei


    Capillary electrophoretic separation profiles of cleaved variants of beta2-microglobulin (beta2m) reflect the conformational equilibria existing in solutions of these proteins. The characterization of these equilibria is of interest since beta2m is responsible for amyloid formation in dialysis-re...

  18. Affinity capillary electrophoresis: the theory of electromigration. (United States)

    Dubský, Pavel; Dvořák, Martin; Ansorge, Martin


    We focus on the state-of-the-art theory of electromigration under single and multiple complexation equilibrium. Only 1:1 complexation stoichiometry is discussed because of its unique status in the field of affinity capillary electrophoresis (ACE). First, we summarize the formulas for the effective mobility in various ACE systems as they appeared since the pioneering days in 1992 up to the most recent theories till 2015. Disturbing phenomena that do not alter the mobility of the analyte directly but cause an unexpected peak broadening have been studied only recently and are also discussed in this paper. Second, we turn our attention to the viscosity effects in ACE. Change in the background electrolyte viscosity is unavoidable in ACE but numerous observations scattered throughout the literature have not been reviewed previously. This leads to an uncritical employment of correction factors that may or may not be appropriate in practice. Finally, we consider the ionic strength effects in ACE, too. Limitations of the current theories are also discussed and the tasks identified where open problems still prevail. Graphical Abstract A weak base (A) undergoes an acidic-basic equilibria (in blue) and migrates with an electrophoretic mobility of [Formula: see text]. Simultaneously, it interacts with a selector (sel) while the analyte-selector complex migrates with an electrophoretic mobility of [Formula: see text]. The strength of the interaction (in orange) is governed by the binding constant, K A , and the concentration of the selector, c sel . This all gives the analyte an effective mobility of [Formula: see text] and moves it out of the zero position (EOF; right top insert). The interaction of the positively charged analyte with the neutral selector slows down the analyte with increasing selector concentration (right bottom insert).

  19. Effect of size, quaternary structure and translational error on the static and dynamic heterogeneity of beta-galactosidase and measurement of electrophoretic dynamic heterogeneity. (United States)

    Craig, Douglas B; Haslam, Allison M; Silverstein, Harlyn J; Chikamatsu, Miki; Shadabi, Elnaz; Nichols, Ellert R


    Single enzyme molecule assays were performed using capillary electrophoresis-based protocols on beta-galactosidase from Lactobacillus delbrueckii, Lactobacillus reuteri, Lactobacillus helveticus and Bacillus circulans. The enzyme was found to show static heterogeneity with respect to catalytic rate and the variance in rate increased with protein size. This is consistent with the proposal that random errors in translation may be an important underlying component of enzyme heterogeneity. Additionally these enzymes were found to show static heterogeneity with respect to electrophoretic mobility. Comparison of wild-type and rpsL E. coli beta-galactosidase expressed in the presence and absence of streptomycin suggested that increases in error do not result in detectable increases in the dynamic heterogeneity of activity with increasing temperature. Finally, a method was developed to measure the dynamic heterogeneity in electrophoretic mobility.

  20. Determination of nanogram per liter concentrations of volatile organic compounds in water by capillary gas chromatography and selected ion monitoring mass spectrometry and its use to define groundwater flow directions in Edwards Aquifer, Texas (United States)

    Buszka, P.M.; Rose, D.L.; Ozuna, G.B.; Groschen, G.E.


    A method has been developed to measure nanogram per liter amounts of selected volatile organic compounds (VOCs) including dichlorodifluoromethane, trichlorofluoromethane, cis-1,2-dichloroethene, trichloroethene, tetrachloroethene, and the isomers of dichlorobenzene in water. The method uses purge-and-trap techniques on a 100 mL sample, gas chromatography with a megabore capillary column, and electron impact, selected ion monitoring mass spectrometry. Minimum detection levels for these compounds ranged from 1 to 4 ng/L in water. Recoveries from organic-free distilled water and natural groundwater ranged from 70.5% for dichlorodifluoromethane to 107.8% for 1,4-dichlorobenzene. Precision was generally best for cis-1,2-dichloroethene, tetrachloroethene, and the dichlorobenzene isomers and worst for dichlorodifluoromethane and trichlorofluoromethane. Blank data indicated persistent, trace-level introduction of dichlorodifluoromethane, 1,4-dichlorobenzene, and tetrachloroemene to samples during storage and shipment at concentrations less than the method reporting limits. The largest concentrations of the selected VOCs in 27 water samples from the Edwards aquifer near San Antonio, TX, were from confined-zone wells near an abandoned landfill. The results defined a zone of water with no detectable VOCs in nearly all of the aquifer west of San Antonio and from part of the confined zone beneath San Antonio.

  1. In vivo simultaneous monitoring of gamma-aminobutyric acid, glutamate, and L-aspartate using brain microdialysis and capillary electrophoresis with laser-induced fluorescence detection: Analytical developments and in vitro/in vivo validations. (United States)

    Sauvinet, Valérie; Parrot, Sandrine; Benturquia, Nadia; Bravo-Moratón, Eva; Renaud, Bernard; Denoroy, Luc


    gamma-Aminobutyric acid (GABA), glutamate (Glu), and L-aspartate (L-Asp) are three major amino acid neurotransmitters in the central nervous system. In this work, a method for the separation of these three neurotransmitters in brain microdialysis samples using a commercially available capillary electrophoresis (CE) system has been developed. Molecules were tagged on their primary amine function with the fluorogene agent naphthalene-2,3-dicarboxaldehyde (NDA), and, after separation by micellar electrokinetic chromatography, were detected by laser-induced fluorescence using a 442 nm helium-cadmium laser. The separation conditions for the analysis of derivatized neurotransmitters in standard solutions and microdialysates have been optimized, and this method has been validated on both pharmacological and analytical basis. The separation of GABA, Glu, and L-Asp takes less than 10 min by using a 75 mmol/L borate buffer, pH 9.2, containing 70 mmol/L SDS and 10 mmol/L hydroxypropyl-beta-cyclodextrin and + 25 kV voltage. The detection limits were 3, 15 nmol/L and, 5 nmol/L for GABA, Glu, and L-Asp, respectively. Moreover, submicroliter samples can be analyzed. This method allows a simple, rapid and accurate measurement of the three amino acid neurotransmitters for the in vivo brain monitoring using microdialysis sampling.

  2. Microdialysis monitoring of catecholamines and excitatory amino acids in the rat and mouse brain: recent developments based on capillary electrophoresis with laser-induced fluorescence detection--a mini-review. (United States)

    Parrot, Sandrine; Bert, Lionel; Mouly-Badina, Laurence; Sauvinet, Valérie; Colussi-Mas, Joyce; Lambás-Señas, Laura; Robert, Frédéric; Bouilloux, Jean-Pierre; Suaud-Chagny, Marie-Françoise; Denoroy, Luc; Renaud, Bernard


    1. Although microdialysis is a widely used approach for in vivo monitoring extracellular neurotransmitter concentrations, it has been previously limited in many cases by its poor temporal resolution. It is clear that when 10-30-min sampling is performed, short-lasting changes in extracellular neurotransmitter concentrations can be overlooked. Such a low sampling rate is necessary when combining microdialysis with the conventional analytical methods like high performance liquid chromatography. 2. Since capillary electrophoresis coupled to laser-induced fluorescence detection (CE-LIFD) allows the detection of attomoles of neurotransmitters, the temporal resolution of microdialysis may be significantly improved: high sampling rates, in the range of 5 s to 1 min, have been already reported by our group and others using CE-LIFD for simultaneously analyzing catecholamines and amino acids in microdialysates. 3. The power of combining microdialyis and CE-LIFD is shown, using examples of physiological and pharmacological studies dealing with the dynamics of in vivo efflux processes and/or interactions between neurotransmitters.

  3. Gas-Filled Capillary Model (United States)

    Steinhauer, L. C.; Kimura, W. D.


    We have developed a 1-D, quasi-steady-state numerical model for a gas-filled capillary discharge that is designed to aid in selecting the optimum capillary radius in order to guide a laser beam with the required intensity through the capillary. The model also includes the option for an external solenoid B-field around the capillary, which increases the depth of the parabolic density channel in the capillary, thereby allowing for propagation of smaller laser beam waists. The model has been used to select the parameters for gas-filled capillaries to be utilized during the Staged Electron Laser Acceleration — Laser Wakefield (STELLA-LW) experiment.

  4. Derivatization in Capillary Electrophoresis. (United States)

    Marina, M Luisa; Castro-Puyana, María


    Capillary electrophoresis is a well-established separation technique in analytical research laboratories worldwide. Its interesting advantages make CE an efficient and potent alternative to other chromatographic techniques. However, it is also recognized that its main drawback is the relatively poor sensitivity when using optical detection. One way to overcome this limitation is to perform a derivatization reaction which is intended to provide the analyte more suitable analytical characteristics enabling a high sensitive detection. Based on the analytical step where the CE derivatization takes place, it can be classified as precapillary (before separation), in-capillary (during separation), or postcapillary (after separation). This chapter describes the application of four different derivatization protocols (in-capillary and precapillary modes) to carry out the achiral and chiral analysis of different compounds in food and biological samples with three different detection modes (UV, LIF, and MS).

  5. How Capillary Rafts Sink

    CERN Document Server

    Protiere, S; Aristoff, J; Stone, H


    We present a fluid dynamics video showing how capillary rafts sink. Small objects trapped at an interface are very common in Nature (insects walking on water, ant rafts, bubbles or pollen at the water-air interface, membranes...) and are found in many multiphase industrial processes. Thanks to Archimedes principle we can easily predict whether an object sinks or floats. But what happens when several small particles are placed at an interface between two fluids. In this case surface tension also plays an important role. These particles self-assemble by capillarity and thus form what we call a "capillary raft". We show how such capillary rafts sink for varying sizes of particles and define how this parameter affects the sinking process.

  6. Design and operation of a portable scanner for high performance microchip capillary array electrophoresis. (United States)

    Scherer, James R; Liu, Peng; Mathies, Richard A


    We have developed a compact, laser-induced fluorescence detection scanner, the multichannel capillary array electrophoresis portable scanner (McCAEPs) as a platform for electrophoretic detection and control of high-throughput, integrated microfluidic devices for genetic and other analyses. The instrument contains a confocal optical system with a rotary objective for detecting four different fluorescence signals, a pneumatic system consisting of two pressure/vacuum pumps and 28 individual addressable solenoid valves for control of on-chip microvalves and micropumps, four Polymerase Chain Reaction (PCR) temperature control systems, and four high voltage power supplies for electrophoresis. The detection limit of the instrument is ~20 pM for on-chip capillary electrophoresis of fluorescein dyes. To demonstrate the system performance for forensic short tandem repeat (STR) analysis, two experiments were conducted: (i) electrophoretic separation and detection of STR samples on a 96-lane microfabricated capillary array electrophoresis microchip. Fully resolved PowerPlex(®) 16 STR profiles amplified from 1 ng of 9947A female standard DNA were successfully obtained; (ii) nine-plex STR amplification, sample injection, separation, and fluorescence detection of 100-copy 9948 male standard DNA in a single integrated PCR- capillary electrophoresis microchip. These results demonstrate that the McCAEPs can be used as a versatile control and detection instrument that operates integrated microfluidic devices for high-performance forensic human identification.

  7. High charged red pigment nanoparticles for electrophoretic displays (United States)

    Hou, Xin-Yan; Bian, Shu-Guang; Chen, Jian-Feng; Le, Yuan


    Organic pigment permanent red F2R nanoparticles were prepared via surface modification to improve the surface charge and dispersion ability in organic medium. Their large surface chargeability is confirmed by ζ-potential value of -49.8 mV. The prepared particles exhibited average size of 105 nm and showed very narrow distribution with polydispersity index of 0.068. The sedimentation ratio of the prepared particles in tetrachloroethylene was less than 5% within 12 days. The electrophoretic inks consisting of the prepared red particles with white particles as contrast showed good electrophoretic display, its refresh time was 200 ms.

  8. Photolithographic process of microcapsule sheet for electrophoretic display

    Energy Technology Data Exchange (ETDEWEB)

    Park, Lee Soon; Choi, Hyung Suk; Kim, Woo-Sik; Lee, Dong-Ho; Min, Kyung-Eun; Seo, Kwan-Ho; Kyu Kang, Inn; Park, Soo-Young; Ho Hwang, Sung; Kwon, Younghwan


    A new method of fabricating electrophoretic display sheet was developed utilizing a photolithographic process. In this method, stripe-type barrier ribs with height of 50-80 {mu}m and gap between ribs of 100-150 {mu}m were patterned on the transparent electrode substrate by photolithographic process using a negative-type photoresist. Microspheres dispersed in UV curable monomer system were closely packed into the spaces between the barrier ribs. After laminating the upper ITO film, the resulting sheet was UV-irradiated to give an electrophoretic display panel with uniform packing of microspheres.

  9. Determination of the Acid-Base Dissociation Constant of Acid-Degradable Hexamethylenetetramine by Capillary Zone Electrophoresis. (United States)

    Takayanagi, Toshio; Shimakami, Natsumi; Kurashina, Masashi; Mizuguchi, Hitoshi; Yabutani, Tomoki


    The acid-base equilibrium of hexamethylenetetramine (hexamine) was analyzed with its effective electrophoretic mobility by capillary zone electrophoresis. Although hexamine is degradable in a weakly acidic aqueous solution, and the degraded products of ammonia and formaldehyde can be formed, the effective electrophoretic mobility of hexamine was measured in the pH range between 2.8 and 6.9. An acid-base dissociation equilibrium of the protonated hexamine was analyzed based on the mobility change, and an acid dissociation constant of pKa = 4.93 ± 0.01 (mean ± standard error, ionic strength: 0.020 mol dm(-3)) was determined. The monoprotic acid-base equilibrium of hexamine was confirmed through comparisons of its electrophoretic mobility with the N-ethylquinolinium ion and with the monocationic N-ethyl derivative of hexamine, as well as a slope analysis of the dissociation equilibrium.

  10. Capillary permeability in adipose tissue

    DEFF Research Database (Denmark)

    Paaske, W P; Nielsen, S L


    of about 7 ml/100 g-min. This corresponds to a capillary diffusion capacity of 2.0 ml/100 g-min which is half the value reported for vasodilated skeletal muscle having approximately twice as great capillary surface area. Thus, adipose tissue has about the same capillary permeability during slight metabolic...

  11. Controlled method of reducing electrophoretic mobility of various substances (United States)

    Vanalstine, James M. (Inventor)


    A method of reducing electrophoretic mobility of macromolecules, particles, cells, and the like is provided. The method comprises interacting the particles or cells with a polymer-linked affinity compound composed of: a hydrophilic neutral polymer such as polyethylene glycol, and an affinity component consisting of a hydrophobic compound such as a fatty acid ester, an immunocompound such as an antibody or active fragment thereof or simular macromolecule, or other ligands. The reduction of electrophoretic mobility achieved is directly proportional to the concentration of the polymer-linked affinity compound employed, and the mobility reduction obtainable is up to 100 percent for particular particles and cells. The present invention is advantageous in that analytical electrophoretic separation can not be achieved for macromolecules, particles, and cells whose native surface charge structure had prevented them from being separated by normal electrophoretic means. Depending on the affinity component utilized, separation can be achieved on the basis of specific/irreversible, specific/reversible, semi-specific/reversible, relatively nonspecific/reversible, or relatively nonspecific/irreversible ligand-substance interactions. The present method is also advantageous in that it can be used in a variety of standard laboratory electrophoresis equipment.

  12. Electrophoretic separation of kidney and pituitary cells on STS-8 (United States)

    Morrison, D. R.; Nachtwey, D. S.; Barlow, G. H.; Cleveland, C.; Lanham, J. W.; Farrington, M. A.; Hatfield, J. M.; Hymer, W. C.; Todd, P.; Wilfinger, W.; Grindeland, R.; Lewis, M. L.

    A Continuous Flow Electrophoresis System (CFES) was used on Space Shuttle flight STS-8 to separate specific secretory cells from suspensions of cultured primary human embryonic kidney cells and rat pituitary cells. The objectives were to isolate the subfractions of kidney cells that produce the largest amounts of urokinase (plasminogen activator), and to isolate the subfractions of rat pituitary cells that secrete growth hormone, prolactin, and other hormones. Kidney cells were separated into more than 32 fractions in each of two electrophoretic runs. Electrophoretic mobility distributions in flight experiments were spread more than the ground controls. Multiple assay methods confirmed that all cultured kidney cell fractions produced some urokinase, and five to six fractions produced significantly more urokinase than the other fractions. Several fractions also produced tissue plasminogen activator. The pituitary cells were separated into 48 fractions in each of the two electrophoretic runs, and the amounts of growth hormone (GH) and prolactin (PRL) released into the medium for each cell fraction were determined. Cell fractions were grouped into eight mobility classes and immunocytochemically assayed for the presence of GH, PRL, ACTH, LH, TSH, and FSH. The patterns of hormone distribution indicate that the specialized cells producing GH and PRL are isolatable due to the differences in electrophoretic mobilities.

  13. Surface modification of titanium dioxide for electrophoretic particles

    Institute of Scientific and Technical Information of China (English)

    PENG Xuhui; LE Yuan; BIAN Shuguang; LI Woyuan; WU Wei; DAI Haitao; CHEN Jianfeng


    To prepare stable electrophoretic ink (E Ink)needs color particles to be uniformly dispersed in the organic medium.Thus,t-he modification of inorganic particle surface is required.In this paper,Titanium dioxide modified by alumina has been studied.The surface composition and structures of modified particles have been characterized by X-ray photoelectron spectrometer (XPS),X-ray diffractometer (XRD) and Fourier transform infrared spectrometer (FT-IR).The dispersibility and electrophoretic mobility of these particles in tetrachloroethylene (TCE) have been investigated by laser particle size analyzer,static sedimentation and electrophoretic instrument.Effects of temperature,pH value and stirring rate on the dispersibility and the charge property of samples have been discussed.The results indicate the settle time of modified TiO2 can last 120 h with the response time of 35 s under the optimized modifying conditions,in which temperature is 85℃-90℃,pH is 8-9 and stirring rate is have been significantly improved,which means that the modified TiO2 is suitable for electrophoretic ink particles.

  14. On-line capillary isotachophoresis-capillary zone electrophoresis analysis of bromate in drinking waters in an automated analyzer with coupled columns and photometric detection. (United States)

    Marák, Jozef; Staňová, Andrea; Vaváková, Veronika; Hrenáková, Martina; Kaniansky, Dušan


    A new, sensitive, and robust analytical method based on capillary zone electrophoresis with on-line capillary isotachophoresis sample pretreatment (ITP-CZE) using a column-coupling (CC) arrangement of automated capillary electrophoretic analyzer was developed for determination of bromate in different type of drinking water samples. Both columns were provided with contact-less conductivity detectors and in CZE step UV detection at 200 nm wavelength was used. Electroosmotic flow of the buffer solutions was suppressed with the addition of 0.1% or 0.05% (m/v) methylhydroxyethylcellulose into the leading and terminating electrolyte, respectively. Hydrodynamic and electroosmotic flows of the buffer solutions were successfully suppressed and therefore, only the electrophoretic transport of ions was significant. Limit of detection for bromate approaching 0.6 μg/L was achieved. Good repeatabilities of migration time (RSD less than 0.3%) and peak area (RSD less than 4.0%) at concentration level 1 μg/L were obtained. Robustness of proposed ITP-CZE method and validation parameters were evaluated. Developed automated ITP-CZE method was applied to the determination of bromate in drinking water samples with different content of inorganic macroconstituents without the need of further sample preparation.

  15. Predicting Electrophoretic Mobility of Protein-Ligand Complexes for Ligands from DNA-Encoded Libraries of Small Molecules. (United States)

    Bao, Jiayin; Krylova, Svetlana M; Cherney, Leonid T; Hale, Robert L; Belyanskaya, Svetlana L; Chiu, Cynthia H; Shaginian, Alex; Arico-Muendel, Christopher C; Krylov, Sergey N


    Selection of target-binding ligands from DNA-encoded libraries of small molecules (DELSMs) is a rapidly developing approach in drug-lead discovery. Methods of kinetic capillary electrophoresis (KCE) may facilitate highly efficient homogeneous selection of ligands from DELSMs. However, KCE methods require accurate prediction of electrophoretic mobilities of protein-ligand complexes. Such prediction, in turn, requires a theory that would be applicable to DNA tags of different structures used in different DELSMs. Here we present such a theory. It utilizes a model of a globular protein connected, through a single point (small molecule), to a linear DNA tag containing a combination of alternating double-stranded and single-stranded DNA (dsDNA and ssDNA) regions of varying lengths. The theory links the unknown electrophoretic mobility of protein-DNA complex with experimentally determined electrophoretic mobilities of the protein and DNA. Mobility prediction was initially tested by using a protein interacting with 18 ligands of various combinations of dsDNA and ssDNA regions, which mimicked different DELSMs. For all studied ligands, deviation of the predicted mobility from the experimentally determined value was within 11%. Finally, the prediction was tested for two proteins and two ligands with a DNA tag identical to those of DELSM manufactured by GlaxoSmithKline. Deviation between the predicted and experimentally determined mobilities did not exceed 5%. These results confirm the accuracy and robustness of our model, which makes KCE methods one step closer to their practical use in selection of drug leads, and diagnostic probes from DELSMs.

  16. Sweeping of alprenolol enantiomers with an organic solvent and sulfated β-cyclodextrin in capillary electrophoresis. (United States)

    Rabanes, Heide R; Quirino, Joselito P


    Sweeping, an on-line sample concentration technique in CE, is the picking and accumulation of analytes by the pseudostationary phase or complexing additive. In the presence of an electric field, the analytes concentrated at the additive front that initially penetrated the sample zone. Here, we describe the sweeping of cationic alprenolol enantiomers using sulfated β-CD and organic solvent. The separation solution contained the anionic additive while ACN was in the sample solution. With fused silica capillaries, positive polarity, and solutions buffered at pH 3, the direction of the enantiomers' effective electrophoretic mobility was the same as the electrophoretic mobility (or electrophoretic mobility without additive). When the amount of ACN in the sample was increased (i.e. 60%), the interaction between the analytes and additive became negligible. This caused the sweeping boundary to shift from the electrophoretically moving β-CD front to the zone between the sample and separation solution. The equation that described the narrowing of injected sample zone was derived. The performance of sweeping with 60% ACN in the sample was then studied under different operating conditions (e.g. type of injection, injection time, and CD concentration). The low interaction between enantiomers and additive gave only moderate increases in sensitivity (approximately tenfold), but was improved when field enhancement was used during electrokinetic injection. With a conductivity difference (separation/sample solution) of 70 and a short injection time of 30 s at 20 kV, peak improvements of >100-fold was easily achieved.

  17. Separation of linear synthetic polymers in non-aqueous capillary zone electrophoresis using cationic surfactant. (United States)

    Yamamura, Tomoyuki; Kitagawa, Shinya; Ohtani, Hajime


    A method for separating water-insoluble and neutral synthetic polymers using non-aqueous capillary zone electrophoresis (NACZE) was developed. The non-aqueous solvent system comprising a mixture of tetrahydrofuran, acetonitrile, and ethanol containing cetyltrimethylammonium chloride was used for solubilizing and conferring positive charges to the polymers. A mixture of polystyrene (PS, Mn=6500) and polybutadiene (PBD, Mn=5900) was successfully separated by the NACZE method using cationic surfactants. Evaluation of the effect of the molecular weight of the polymers on the electrophoretic behavior demonstrated that PSs with different molecular weights (Mn=6500, 10,200, 19,600, 200,000) were co-eluted as a single peak. That is, the apparent electrophoretic mobility of the PSs was independent of the molecular weight. In contrast, evaluation of PBD and polycarbonate (PC) demonstrated that the solubility of polymers in the medium affected the apparent electrophoretic mobility of the polymers, where low solubility resulted in reduced apparent electrophoretic mobility. Using the proposed method, poly(styrene-co-methylmethacrylate)s with different compositions were successfully separated. Copyright © 2015 Elsevier B.V. All rights reserved.

  18. Carboxylated ficolls: preparation, characterization, and electrophoretic behavior of model charged nanospheres. (United States)

    Guo, Xuhong; Kirton, Gavin F; Dubin, Paul L


    Carboxylated ficolls were prepared as model spherical colloids of variable charge and size, with radii ranging from 3.0 to 19.3 nm. Capillary electrophoresis (CE), electrophoretic light scattering (ELS), and potentiometric titration were used to determine mobilities as a function of pH, degree of ionization alpha, and surface potential psi(0). Measured mobilities typically display a plateau at high pH, corresponding to high alpha and psi(0), confirming the general nature of this effect for charged spheres, seen also for charged dendrimers and charged latex particles. This result is examined in the context of a discontinuity in mobility predicted by the Wiersema, O'Brien, and White (WOW) theory and a more recent primitive model electrophoresis (PME) theory, in which bound counterions are considered either as point charges or as hard spheres. While no mobility maximum can be determined as expected by these two theories, our data seem more to support Belloni's theoretical expectations on charged polymers and spheres. Here we explain the mobility plateaus in terms of counterions accumulated close to the surface (surface potential-determining ions) or within the shear plane (mobility-determining ions).

  19. Biologically driven neural platform invoking parallel electrophoretic separation and urinary metabolite screening. (United States)

    Page, Tessa; Nguyen, Huong Thi Huynh; Hilts, Lindsey; Ramos, Lorena; Hanrahan, Grady


    This work reveals a computational framework for parallel electrophoretic separation of complex biological macromolecules and model urinary metabolites. More specifically, the implementation of a particle swarm optimization (PSO) algorithm on a neural network platform for multiparameter optimization of multiplexed 24-capillary electrophoresis technology with UV detection is highlighted. Two experimental systems were examined: (1) separation of purified rabbit metallothioneins and (2) separation of model toluene urinary metabolites and selected organic acids. Results proved superior to the use of neural networks employing standard back propagation when examining training error, fitting response, and predictive abilities. Simulation runs were obtained as a result of metaheuristic examination of the global search space with experimental responses in good agreement with predicted values. Full separation of selected analytes was realized after employing optimal model conditions. This framework provides guidance for the application of metaheuristic computational tools to aid in future studies involving parallel chemical separation and screening. Adaptable pseudo-code is provided to enable users of varied software packages and modeling framework to implement the PSO algorithm for their desired use.

  20. Ionic liquids in chromatographic and electrophoretic techniques: toward additional improvements in the separation of natural compounds (United States)

    Freire, Carmen S. R.; Coutinho, João A. P.; Silvestre, Armando J. D.; Freire, Mara G.


    Due to their unique properties, in recent years, ionic liquids (ILs) have been largely investigated in the field of analytical chemistry. Particularly during the last sixteen years, they have been successfully applied in the chromatographic and electrophoretic analysis of value-added compounds extracted from biomass. Considering the growing interest in the use of ILs in this field, this critical review provides a comprehensive overview on the improvements achieved using ILs as constituents of mobile or stationary phases in analytical techniques, namely in capillary electrophoresis and its different modes, in high performance liquid chromatography, and in gas chromatography, for the separation and analysis of natural compounds. The impact of the IL chemical structure and the influence of secondary parameters, such as the IL concentration, temperature, pH, voltage and analysis time (when applied), are also critically addressed regarding the achieved separation improvements. Major conclusions on the role of ILs in the separation mechanisms and the performance of these techniques in terms of efficiency, resolution and selectivity are provided. Based on a critical analysis of all published results, some target-oriented ILs are suggested. Finally, current drawbacks and future challenges in the field are highlighted. In particular, the design and use of more benign and effective ILs as well as the development of integrated (and thus more sustainable) extraction–separation processes using IL aqueous solutions are suggested within a green chemistry perspective. PMID:27667965

  1. Ionic liquids in chromatographic and electrophoretic techniques: toward additional improvements in the separation of natural compounds. (United States)

    Soares, Belinda; Passos, Helena; Freire, Carmen S R; Coutinho, João A P; Silvestre, Armando J D; Freire, Mara G


    Due to their unique properties, in recent years, ionic liquids (ILs) have been largely investigated in the field of analytical chemistry. Particularly during the last sixteen years, they have been successfully applied in the chromatographic and electrophoretic analysis of value-added compounds extracted from biomass. Considering the growing interest in the use of ILs in this field, this critical review provides a comprehensive overview on the improvements achieved using ILs as constituents of mobile or stationary phases in analytical techniques, namely in capillary electrophoresis and its different modes, in high performance liquid chromatography, and in gas chromatography, for the separation and analysis of natural compounds. The impact of the IL chemical structure and the influence of secondary parameters, such as the IL concentration, temperature, pH, voltage and analysis time (when applied), are also critically addressed regarding the achieved separation improvements. Major conclusions on the role of ILs in the separation mechanisms and the performance of these techniques in terms of efficiency, resolution and selectivity are provided. Based on a critical analysis of all published results, some target-oriented ILs are suggested. Finally, current drawbacks and future challenges in the field are highlighted. In particular, the design and use of more benign and effective ILs as well as the development of integrated (and thus more sustainable) extraction-separation processes using IL aqueous solutions are suggested within a green chemistry perspective.

  2. Practical capillary electrophoresis

    CERN Document Server

    Weinberger, Robert


    In the 1980s, capillary electrophoresis (CE) joined high-performance liquid chromatography (HPLC) as the most powerful separation technique available to analytical chemists and biochemists. Published research using CE grew from 48 papers in the year of commercial introduction (1988) to 1200 in 1997. While only a dozen major pharmaceutical and biotech companies have reduced CE to routine practice, the applications market is showing real or potential growth in key areas, particularly in the DNA marketplace for genomic mapping and forensic identification. For drug development involving small molecules (including chiral separations), one CE instrument can replace 10 liquid chromatographs in terms of speed of analysis. CE also uses aqueous rather than organic solvents and is thus environmentally friendlier than HPLC. The second edition of Practical Capillary Electrophoresis has been extensively reorganized and rewritten to reflect modern usage in the field, with an emphasis on commercially available apparatus and ...

  3. Reliable electrophoretic mobilities free from Joule heating effects using CE. (United States)

    Evenhuis, Christopher J; Hruska, Vlastimil; Guijt, Rosanne M; Macka, Miroslav; Gas, Bohuslav; Marriott, Philip J; Haddad, Paul R


    Ionic electrophoretic mobilities determined by means of CE experiments are sometimes different when compared to generally accepted values based on limiting ionic conductance measurements. While the effect of ionic strength on electrophoretic mobility has been long understood, the increase in the mobility that results from Joule heating (the resistive heating that occurs when a current passes through an electrolyte) has been largely overlooked. In this work, a simple method for obtaining reliable and reproducible values of electrophoretic mobility is described. The electrophoretic mobility is measured over a range of driving powers and the extrapolation to zero power dissipation is employed to eliminate the effect of Joule heating. These extrapolated values of electrophoretic mobility can then be used to calculate limiting ionic mobilities by making a correction for ionic strength; this somewhat complicated calculation is conveniently performed by using the freeware program PeakMaster 5. These straightforward procedures improve the agreement between experimentally determined and literature values of limiting ionic mobility by at least one order of magnitude. Using Tris-chromate BGE with a value of conductivity 0.34 S/m and ionic strength 59 mM at a modest dissipated power per unit length of 2.0 W/m, values of mobility for inorganic anions were increased by an average of 12.6% relative to their values free from the effects of Joule heating. These increases were accompanied by a reduction in mobilities due to the ionic strength effect, which was 11% for univalent and 28% for divalent inorganic ions compared to their limiting ionic mobilities. Additionally, it was possible to determine the limiting ionic mobility for a number of aromatic anions by using PeakMaster 5 to perform an ionic strength correction. A major significance of this work is in being able to use CE to obtain reliable and accurate values of electrophoretic mobilities with all its benefits, including

  4. due to Capillary Forces

    Directory of Open Access Journals (Sweden)

    Hassen M. Ouakad


    Full Text Available We present modeling and analysis for the static behavior and collapse instabilities of doubly-clamped and cantilever microbeams subjected to capillary forces. These forces can be as a result of a volume of liquid trapped underneath the microbeam during the rinsing and drying process in fabrication. The model considers the microbeam as a continuous medium, the capillary force as a nonlinear function of displacement, and accounts for the mid-plane stretching and geometric nonlinearities. The capillary force is assumed to be distributed over a specific length underneath the microbeam. The Galerkin procedure is used to derive a reduced-order model consisting of a set of nonlinear algebraic and differential equations that describe the microbeams static and dynamic behaviors. We study the collapse instability, which brings the microbeam from its unstuck configuration to touch the substrate and gets stuck in the so-called pinned configuration. We calculate the pull-in length that distinguishes the free from the pinned configurations as a function of the beam thickness and gap width for both microbeams. Comparisons are made with analytical results reported in the literature based on the Ritz method for linear and nonlinear beam models. The instability problem, which brings the microbeam from a pinned to adhered configuration is also investigated. For this case, we use a shooting technique to solve the boundary-value problem governing the deflection of the microbeams. The critical microbeam length for this second instability is also calculated.

  5. Preparation of Panel and Charged Particles for Electrophoretic Display (United States)

    Choi, Hyung Suk; Park, Jin Woo; Park, Lee Soon; Lee, Jung Kyung; Han, Yoon Soo; Kwon, Younghwan

    Studies on the formulation of photosensitive paste for transparent soft mold press (TSMP) method have been performed. With the optimum formulation of the photosensitive paste the box-type barrier rib with good flexibility and high solvent resistance was fabricated, suitable for the panel material of the electrophoretic display. Cationically-charged white particles were prepared by using TiO2 nanoparticles, silane coupling agent with amino groups, dispersant and acetic acid. The cationically charged TiO2 particles exhibited 74.09 mV of zeta potential and 3.11 × 10-5 cm2/Vs of mobility. Electrophoretic display fabricated with the charged TiO2 particles exhibited 10 V of low driving voltage and maximum contrast ratio (5.3/1) at 30 V.

  6. Ketoprofen analysis in serum by capillary electrophoresis. (United States)

    Friedberg, M; Shihabi, Z K


    A method for the quantification of ketoprofen, a new non-prescription non-steroidal anti-inflammatory drug, in serum, by capillary zone electrophoresis for therapeutic monitoring and emergency toxicology is described. Serum is deproteinized with acetonitrile in the presence of an internal standard, to remove serum proteins and to induce sample stacking. The migration time was about 10 min. The assay was linear between 1-10 mg/l without any interferences. The method compared well to an HPLC assay. The HPLC afforded a better detection limit, but the CE was less expensive to operate. This method demonstrates that capillary electrophoresis is a simple and effective method for determination of ketoprofen as well as other drugs in human serum at levels close to 1 mg/l.

  7. Modeling Microscopic Chemical Sensors in Capillaries

    CERN Document Server

    Hogg, Tad


    Nanotechnology-based microscopic robots could provide accurate in vivo measurement of chemicals in the bloodstream for detailed biological research and as an aid to medical treatment. Quantitative performance estimates of such devices require models of how chemicals in the blood diffuse to the devices. This paper models microscopic robots and red blood cells (erythrocytes) in capillaries using realistic distorted cell shapes. The models evaluate two sensing scenarios: robots moving with the cells past a chemical source on the vessel wall, and robots attached to the wall for longer-term chemical monitoring. Using axial symmetric geometry with realistic flow speeds and diffusion coefficients, we compare detection performance with a simpler model that does not include the cells. The average chemical absorption is quantitatively similar in both models, indicating the simpler model is an adequate design guide to sensor performance in capillaries. However, determining the variation in forces and absorption as cells...

  8. Microchip capillary electrophoresis for frontal analysis of free bilirubin and study of its interaction with human serum albumin. (United States)

    Nie, Zhou; Fung, Ying Sing


    To meet the need for bedside monitoring of free bilirubin for neonates under critical conditions, a microfluidic chip was fabricated and tested for its coupling with CE/frontal analysis (FA) to determine free bilirubin and study of its binding interaction with HSA, which regulated its concentration in plasma. The poly(methyl methacrylate) (PMMA) multichannel chip was fabricated by CO2 laser ablation and bonded with a fused-silica separation capillary for CE/FA separation with UV detection. The chip was designed to allow a complete assay of four electrophoretic runs using preconditioned channels to speed up the determination of free bilirubin and to deliver quick results for bedside monitoring. Under optimized conditions, the linear working range for free bilirubin was from 10 to 200 micromol with RSDs from 2.1 to 5.0% for n=3, and the LOD at 9 micromol for S/N=3. From a binding study between bilirubin and HSA under FA condition, the second binding constant for bilirubin-HSA was determined as 1.07x10(5) L/mol and the number of binding sites per HSA as 3.46. The results enabled the calculation of free bilirubin for jaundiced infants based on the clinically significant level of total bilirubin, producing a range of 118.3-119.4 micromol/L. The developed method is shown to meet the clinical requirement with additional margin of protection to detect the early rising level of free bilirubin prior to jaundice condition. The low-cost microchip CE/FA device is shown to produce quick results with high potential to deliver a suitable bed-side monitoring method for bilirubin management in neonates.

  9. Simulations of Electrophoretic RNA Transport Through Transmembrane Carbon Nanotubes


    Zimmerli, Urs; Koumoutsakos, Petros


    The study of interactions between carbon nanotubes and cellular components, such as membranes and biomolecules, is fundamental for the rational design of nanodevices interfacing with biological systems. In this work, we use molecular dynamics simulations to study the electrophoretic transport of RNA through carbon nanotubes embedded in membranes. Decorated and naked carbon nanotubes are inserted into a dodecane membrane and a dimyristoylphosphatidylcholine lipid bilayer, and the system is sub...

  10. Chromatographic and electrophoretic methods for nanodisc purification and analysis

    DEFF Research Database (Denmark)

    Justesen, Bo Højen; Günther-Pomorski, Thomas


    Soluble nanoscale lipid bilayers, termed nanodiscs, are widely used in science for studying the membrane-anchored and integral membrane protein complexes under defined experimental conditions. Although their formation occurs by a self-assembly process, nanodisc purification and the verification...... of proper reconstitution are still major challenges during the sample preparation. This review gives an overview of the methods used for purifying and analyzing nanodiscs and nanodisc-reconstituted membrane proteins, with an emphasis on the chromatographic and electrophoretic approaches....

  11. Quality criterion to optimize separations in capillary electrophoresis: Application to the analysis of harmala alkaloids. (United States)

    Tascon, Marcos; Benavente, Fernando; Castells, Cecilia B; Gagliardi, Leonardo G


    In capillary electrophoresis (CE), resolution (Rs) and selectivity (α) are criteria often used in practice to optimize separations. Nevertheless, when these and other proposed parameters are considered as an elementary criterion for optimization by mathematical maximization, certain issues and inconsistencies appear. In the present work we analyzed the pros and cons of using these parameters as elementary criteria for mathematical optimization of capillary electrophoretic separations. We characterized the requirements of an ideal criterion to qualify separations within the framework of mathematical optimizations and, accordingly, propose: -1- a new elementary criterion (t') and -2- a method to extend this elementary criterion to compose a global function that simultaneously qualifies many different aspects, also called multicriteria optimization function (MCOF). In order to demonstrate this new concept, we employed a group of six alkaloids with closely related structures (harmine, harmaline, harmol, harmalol, harmane and norharmane). On the basis of this system, we present a critical comparison between the new optimization criterion t' and the former elementary criteria. Finally, aimed at validating the proposed methods, we composed an MCOF in which the capillary-electrophoretic separation of the six model compounds is mathematically optimized as a function of pH as the unique variable. Experimental results subsequently confirmed the accuracy of the model.

  12. Validated Method for the Determination of Piroxicam by Capillary Zone Electrophoresis and Its Application to Tablets

    Directory of Open Access Journals (Sweden)

    Arın Gül Dal


    piroxicam in tablets. The separation of piroxicam was conducted in a fused-silica capillary by using 10 mM borate buffer (pH 9.0 containing 10% (v/v methanol as background electrolyte. The optimum conditions determined were 25 kV for separation voltage and 1 s for injection time. Analysis was carried out with UV detection at 204 nm. Naproxen sodium was used as an internal standard. The method was linear over the range of 0.23–28.79 µg/mL. The accuracy and precision were found to be satisfied within the acceptable limits (<2%. The LOD and LOQ were found to be 0.07 and 0.19 µg/mL, respectively. The method described here was applied to tablet dosage forms and the content of a tablet was found in the limits of USP-24 suggestions. To compare the results of capillary electrophoretic method, UV spectrophotometric method was developed and the difference between two methods was found to be insignificant. The capillary zone electrophoretic method developed in this study is rapid, simple, and suitable for routine analysis of piroxicam in pharmaceutical tablets.

  13. Nanocapillary electrokinetic tracking for monitoring charge fluctuations on a single nanoparticle. (United States)

    Faez, Sanli; Samin, Sela; Baasanjav, Dashdeleg; Weidlich, Stefan; Schmidt, Markus; Mosk, Allard P


    We introduce nanoCapillary Electrokinetic Tracking (nanoCET), an optofluidic platform for continuously measuring the electrophoretic mobility of a single colloidal nanoparticle or macromolecule in vitro with millisecond time resolution and high charge sensitivity. This platform is based on using a nanocapillary optical fiber in which liquids may flow inside a channel embedded inside the light-guiding core and nanoparticles are tracked using elastic light scattering. Using this platform we have experimentally measured the electrophoretic mobility of 60 nm gold nanoparticles in an aqueous environment. Further, using numerical simulations, we demonstrate the underlying electrokinetic dynamics inside the nanocapillary and the necessary steps for extending this method to probing single biomolecules, which can be achieved with existing technologies. This achievement will immensely facilitate the daunting challenge of monitoring biochemical or catalytic reactions on a single entity over a wide range of timescales. The unique measurement capabilities of this platform pave the way for a wide range of discoveries in colloid science, analytical biochemistry, and medical diagnostics.

  14. Electrophoretic Retardation of Colloidal Particles in Nonpolar Liquids

    Directory of Open Access Journals (Sweden)

    Filip Strubbe


    Full Text Available We have measured the electrophoretic mobility of single, optically trapped colloidal particles, while gradually depleting the co-ions and counterions in the liquid around the particle by applying a dc voltage. This is achieved in a nonpolar liquid, where charged reverse micelles act as co-ions and counterions. By increasing the dc voltage, the mobility first increases when the concentrations of co-ions and counterions near the particle start to decrease. At sufficiently high dc voltage (around 2 V, the mobility reaches a saturation value when the co-ions and counterions are fully separated. The increase in mobility is larger when the equilibrium ionic strength is higher. The dependence of the experimental data on the equilibrium ionic strength and on the applied voltage is in good agreement with the standard theory of electrophoretic retardation, assuming that the bare particle charge remains constant. This method is useful for studying the electrophoretic retardation effect and charging mechanisms for nonpolar colloids, and it sheds light on previously unexplained particle acceleration in electronic ink devices.

  15. A rapid gel electrophoretic chip for serum cholesterol determination. (United States)

    Kaminikado, Kenta; Ikeda, Ryuzo; Idegami, Koutaro; Nagatani, Naoki; Vestergaard, Mun'delanji C; Saito, Masato; Tamiya, Eiichi


    We present a rapid gel electrophoretic chip, composed of 2.5% (w/v) acrylamide and 1% (w/v) agarose gel, for serum cholesterol determination using a photo lithography technique. After optimizations, we determined the lipoprotein concentration of standard serum using a conventional enzyme method. The serum was diluted, stained and loaded for 15 min onto the chip. After loading, the intensities of low density lipoprotein cholesterol (LDL-C) and high density lipoprotein cholesterol (HDL-C) bands separated at the chip were estimated using an image analyzer. The intensities of these bands corresponded to concentrations obtained from a standard enzyme-based method. The detected LDL-C and HDL-C concentrations were linear up to 146 mg dL(-1) and 53 mg dL(-1) respectively. Finally, we carried out the cholesterol analysis using real biological samples obtained from nine volunteers using our electrophoretic chip. The LDL-C and HDL-C levels detected using our chip correlated well with the results obtained using the conventional enzyme-based method r(2) = 0.98 and r(2) = 0.86 for LDL-C and HDL-C, respectively. Although our sample size is small and confined only to health volunteers, we have demonstrated that this proof-of-concept gel electrophoretic chip can determine lipoproteins, simultaneously.

  16. A novel method for the preparation of electrophoretic display microcapsules

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Xiao-Meng; He, Jing; Liu, Sheng-Yun [State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029 (China); Chen, Jian-Feng [State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029 (China); Research Center of the Ministry of Education for High Gravity Engineering and Technology, Beijing University of Chemical Technology, Beijing 100029 (China); Le, Yuan, E-mail: [State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029 (China)


    Highlights: • The electrophoretic display microcapsules were prepared by coaxial jet method aided by gas spray. • The positions of inner tube, liquid and gas flow rate of the process were investigated. • The size and shell thickness of the prepared microcapsules were controllable. • The prepared microcapsules had high coating ratio and exhibit reversible response to DC field. - Abstract: The narrow distributed electrophoretic display microcapsules containing electrophoretic ink were prepared using coaxial jet method aided by gas spray. Experimental results showed the size and shell thickness of the microcapsules could be controlled by adjusting flow rates of core and shell fluids as well as gas. The as-prepared white and red microcapsules, with average size of 100 and 200 μm respectively, had high coating ratio (above 90%) and exhibited reversible response to DC electric field. Compared with the approach of other microencapsulation methods, the new technique not only has a simple procedure but also provides a more effective way of size control. This novel method is expected to prepare microcapsules with potential application in the fields of electronic paper and other material science.

  17. Properties of electrophoretically deposited single wall carbon nanotube films

    Energy Technology Data Exchange (ETDEWEB)

    Lim, Junyoung; Jalali, Maryam; Campbell, Stephen A., E-mail:


    This paper describes techniques for rapidly producing a carbon nanotube thin film by electrophoretic deposition at room temperature and determines the film mass density and electrical/mechanical properties of such films. The mechanism of electrophoretic deposition of thin layers is explained with experimental data. Also, film thickness is measured as a function of time, electrical field and suspension concentration. We use Rutherford backscattering spectroscopy to determine the film mass density. Films created in this manner have a resistivity of 2.14 × 10{sup −3} Ω·cm, a mass density that varies with thickness from 0.12 to 0.54 g/cm{sup 3}, and a Young's modulus between 4.72 and 5.67 GPa. The latter was found to be independent of thickness from 77 to 134 nm. We also report on fabricating free-standing films by removing the metal seed layer under the CNT film, and selectively etching a sacrificial layer. This method could be extended to flexible photovoltaic devices or high frequency RF MEMS devices. - Highlights: • We explain the electrophoretic deposition process and mechanism of thin SWCNT film deposition. • Characterization of the SWCNT film properties including density, resistivity, transmittance, and Young's modulus. • The film density and resistivity are found to be a function of the film thickness. • Techniques developed to create free standing layers of SW-CNTs for flexible electronics and mechanical actuators.

  18. Strategy for non-target ionic analysis by capillary electrophoresis with ultraviolet detection. (United States)

    Sursyakova, Viktoria V; Burmakina, Galina V; Rubaylo, Anatoly I


    A strategy for non-target analysis of samples with unknown composition by capillary electrophoresis (CE) with ultraviolet (UV) detection is suggested. The strategy is based on the preliminary identification of analytes and further optimization of the conditions for their separation using the developed computational tool set ElphoSeparation. It is shown that, in order to record electrophoretic peaks with the mobilities from the maximum to minimum possible values, the positive and negative voltage polarity and hydrodynamic pressure should be used. To choose the optimal separation conditions, dynamic maps of electrophoretic separation (DMES) are suggested. DMES is a bar chart with theoretical resolutions of adjacent peaks presented in ascending order of the migration time. The resolution is calculated as the division of the difference of the effective electrophoretic mobilities of adjacent analytes by their average peak width in terms of electrophoretic mobility. The suggested strategy is tested by the example of the analysis of herbal medicine (Holosas) on the basis of rose hips. The approach should be used to analyze samples with not very complex composition, such as environmental water and precipitation samples, process liquors, some vegetable extracts, biological fluids, food, and other samples for the determination of widespread compounds capable of forming ionic species. For samples with complex composition, the approach used together with other techniques may produce advantageous information due to specificity of the method, particularly it can be useful for determination of compounds suffering from low volatility or thermal stability, and for analysis of samples with difficult matrices. Graphical Abstract The scheme of performing the non-target ionic analysis by capillary electrophoresis with ultraviolet detection.

  19. Wall modified photonic crystal fibre capillaries as porous layer open tubular columns for in-capillary micro-extraction and capillary chromatography

    Energy Technology Data Exchange (ETDEWEB)

    Kazarian, Artaches A. [Australian Centre for Research on Separation Science, School of Physical Sciences, University of Tasmania, Private Bag 75, Hobart, Tasmania 7001 (Australia); W.M. Keck FT-ICR-MS Laboratory, Department of Chemistry, North Carolina State University, Raleigh, NC (United States); Sanz Rodriguez, Estrella; Deverell, Jeremy A. [Australian Centre for Research on Separation Science, School of Physical Sciences, University of Tasmania, Private Bag 75, Hobart, Tasmania 7001 (Australia); McCord, James; Muddiman, David C. [W.M. Keck FT-ICR-MS Laboratory, Department of Chemistry, North Carolina State University, Raleigh, NC (United States); Paull, Brett, E-mail: [Australian Centre for Research on Separation Science, School of Physical Sciences, University of Tasmania, Private Bag 75, Hobart, Tasmania 7001 (Australia); ARC Centre of Excellence for Electromaterials Science, School of Physical Sciences, University of Tasmania, Private Bag 75, Hobart, Tasmania 7001 (Australia)


    Wall modified photonic crystal fibre capillary columns for in-capillary micro-extraction and liquid chromatographic separations is presented. Columns contained 126 internal parallel 4 μm channels, each containing a wall bonded porous monolithic type polystyrene-divinylbenzene layer in open tubular column format (PLOT). Modification longitudinal homogeneity was monitored using scanning contactless conductivity detection and scanning electron microscopy. The multichannel open tubular capillary column showed channel diameter and polymer layer consistency of 4.2 ± 0.1 μm and 0.26 ± 0.02 μm respectively, and modification of 100% of the parallel channels with the monolithic polymer. The modified multi-channel capillaries were applied to the in-capillary micro-extraction of water samples. 500 μL of water samples containing single μg L{sup −1} levels of polyaromatic hydrocarbons were extracted at a flow rate of 10 μL min{sup −1}, and eluted in 50 μL of acetonitrile for analysis using HPLC with fluorescence detection. HPLC LODs were 0.08, 0.02 and 0.05 μg L{sup −1} for acenaphthene, anthracene and pyrene, respectively, with extraction recoveries of between 77 and 103%. The modified capillaries were also investigated briefly for direct application to liquid chromatographic separations, with the retention and elution of a standard protein (cytochrome c) under isocratic conditions demonstrated, proving chromatographic potential of the new column format, with run-to-run retention time reproducibility of below 1%. - Highlights: • Novel PS-DVB modified photonic crystal fibres for in-capillary micro-extraction. • New method for micro-extraction of PAHs and HPLC-FL detection at sub-ppb levels. • Demonstration of PS-DVB modified photonic crystal fibres for capillary bioseparations.

  20. Analytical study of Joule heating effects on electrokinetic transportation in capillary electrophoresis. (United States)

    Xuan, Xiangchun; Li, Dongqing


    Electric fields are often used to transport fluids (by electroosmosis) and separate charged samples (by electrophoresis) in microfluidic devices. However, there exists inevitable Joule heating when electric currents are passing through electrolyte solutions. Joule heating not only increases the fluid temperature, but also produces temperature gradients in cross-stream and axial directions. These temperature effects make fluid properties non-uniform, and hence alter the applied electric potential field and the flow field. The mass species transport is also influenced. In this paper we develop an analytical model to study Joule heating effects on the transport of heat, electricity, momentum and mass species in capillary-based electrophoresis. Close-form formulae are derived for the temperature, applied electrical potential, velocity, and pressure fields at steady state, and the transient concentration field as well. Also available are the compact formulae for the electric current and the volume flow rate through the capillary. It is shown that, due to the thermal end effect, sharp temperature drops appear close to capillary ends, where sharp rises of electric field are required to meet the current continuity. In order to satisfy the mass continuity, pressure gradients have to be induced along the capillary. The resultant curved fluid velocity profile and the increase of molecular diffusion both contribute to the dispersion of samples. However, Joule heating effects enhance the sample transport velocity, reducing the analysis time in capillary electrophoretic separations.

  1. Performance Evaluation of Automated Passive Capillary Sampler for Estimating Water Drainage in the Vadose Zone (United States)

    Passive capillary samplers (PCAPs) are widely used to monitor, measure and sample drainage water under saturated and unsaturated soil conditions in the vadose zone. The objective of this study was to evaluate the performance and accuracy of automated passive capillary sampler for estimating drainage...

  2. Tapered capillary optics (United States)

    Hirsch, Gregory


    A metal or glass wire is etched with great precision into a very narrowly tapering cone which has the shape of the desired final capillary-optics bore. By controlling the rate of removal of the wire from an etchant bath, a carefully controlled taper is produced. A sensor measures the diameter of the wire as it leaves the surface of the etchant. This signal is used for feedback control of the withdrawal speed. The etched wire undergoes a treatment to produce an extremely low surface-roughness. The etched and smoothed wire is coated with the material of choice for optimizing the reflectivity of the radiation being focused. This could be a vacuum evaporation, sputtering, CVD or aqueous chemical process. The coated wire is either electroplated, built up with electroless plating, or encapsulated in a polymer cylinder such as epoxy to increase the diameter of the wire for easier handling and greater robustness. During this process, the wire is vertically oriented and tensioned to assure that the wire is absolutely straight. The coated and electroformed wire is bonded to a flat, rigid substrate and is then periodically segmented by cutting or etching a series of narrow slits or grooves into the wire. The wire is vertically oriented and tensioned during the bonding process to assure that it is straight. The original wire material is then chemically etched away through the slits or otherwise withdrawn to leave the hollow internal bore of the final tapered-capillary optical element.

  3. Recent developments in capillary and chip electrophoresis of bioparticles: Viruses, organelles, and cells. (United States)

    Subirats, Xavier; Blaas, Dieter; Kenndler, Ernst


    In appropriate aqueous buffer solutions, biological particles usually exhibit a particular electric surface charge due to exposed charged or chargeable functional groups (amino acid residues, acidic carbohydrate moieties, etc.). Consequently, these bioparticles can migrate in solution under the influence of an electric field allowing separation according to their electrophoretic mobilities or their pI values. Based on these properties, electromigration methods are of eminent interest for the characterization, separation, and detection of such particles. The present review discusses the research papers published between 2008 and 2010 dealing with isoelectric focusing and zone electrophoresis of viruses, organelles and microorganisms (bacteria and yeast cells) in the capillary and the chip format.

  4. Bedside Blood Glucose Monitoring in Hospitals

    National Research Council Canada - National Science Library

    American Diabetes Association


    Bedside Blood Glucose Monitoring in Hospitals American Diabetes Association The modern management of hospitalized patients with diabetes includes capillary blood glucose determinations at the bedside...

  5. Capillaries modified by noncovalent anionic polymer adsorption for capillary zone electrophoresis, micellar electrokinetic capillary chromatography and capillary electrophoresis mass spectrometry

    DEFF Research Database (Denmark)

    Bendahl, L; Hansen, S H; Gammelgaard, Bente


    A simple coating procedure for generation of a high and pH-independent electroosmotic flow in capillary zone electrophoresis (CZE) and micellar electrokinetic capillary chromatography (MEKC) is described. The bilayer coating was formed by noncovalent adsorption of the ionic polymers Polybrene...

  6. Physiological factors influencing capillary growth. (United States)

    Egginton, S


    (1) Angiogenesis (growth of new capillaries from an existing capillary bed) may result from a mismatch in microvascular supply and metabolic demand (metabolic error signal). Krogh examined the distribution and number of capillaries to explore the correlation between O(2) delivery and O(2) consumption. Subsequently, the heterogeneity in angiogenic response within a muscle has been shown to reflect either differences in fibre type composition or mechanical load. However, local control leads to targetted angiogenesis in the vicinity of glycolytic fibre types following muscle stimulation, or oxidative fibres following endurance training, while heterogeneity of capillary spacing is maintained during ontogenetic growth. (2) Despite limited microscopy resolution and lack of specific markers, Krogh's interest in the structure of the capillary wall paved the way for understanding the mechanisms of capillary growth. Angiogenesis may be influenced by the response of perivascular or stromal cells (fibroblasts, macrophages and pericytes) to altered activity, likely acting as a source for chemical signals modulating capillary growth such as vascular endothelial growth factor. In addition, haemodynamic factors such as shear stress and muscle stretch play a significant role in adaptive remodelling of the microcirculation. (3) Most indices of capillarity are highly dependent on fibre size, resulting in possible bias because of scaling. To examine the consequences of capillary distribution, it is therefore helpful to quantify the area of tissue supplied by individual capillaries. This allows the spatial limitations inherent in most models of tissue oxygenation to be overcome generating an alternative approach to Krogh's tissue cylinder, the capillary domain, to improve descriptions of intracellular oxygen diffusion. © 2010 The Author. Acta Physiologica © 2010 Scandinavian Physiological Society.

  7. Determination of acidity constants of enolisable compounds by capillary electrophoresis. (United States)

    Mofaddel, N; Bar, N; Villemin, D; Desbène, P L


    Research on the structure-activity relationships of molecules with acidic carbon atoms led us to undertake a feasibility study on the determination of their acidity constants by capillary electrophoresis (CE). The studied molecules had diverse structures and were tetronic acid, acetylacetone, diethylmalonate, Meldrum's acid, 3-methylrhodanine, nitroacetic acid ethyl ester, pyrimidine-2,4,6-trione, 3-oxo-3-phenylpropionic acid ethyl ester, 1-phenylbutan-1,3-dione, 5,5-dimethylcyclohexan-1,3-dione and homophthalic anhydride. The p Ka range explored by CE was therefore very large (from 3 to 12) and p Ka values near 12 were evaluated by mathematical extrapolations. The analyses were carried out in CZE mode using a fused silica capillary grafted (or not) with hexadimethrine. Owing to the electrophoretic behaviour of these compounds according to the pH, their acidity constants could be evaluated and appeared in perfect agreement with the literature data obtained, a few decades ago, by means of potentiometry, spectrometry or conductimetry. The p Ka of homophthalic anhydride and 3-methylrhodanine were evaluated for the first time.

  8. Variations in virulence between different electrophoretic types of Listeria monocytogenes

    DEFF Research Database (Denmark)

    Nørrung, Birgit; Andersen, Jens Kirk


    A total of 245 strains of Listeria monocytogenes, representing 33 different electrophoretic types (ETs), were examined quantitatively for haemolytic activity. No significant difference was observed in the mean haemolytic activity between different ETs. Eighty four out of 91 strains examined were...... compared with 3.64 among food isolates). The explanation for this may be that more virulent strains are more prone to cause human infection. It is, however, also possible that strains oft. monocytogenes may become more virulent while multiplying in a living organism compared with multiplying in foods....

  9. Protein electrophoretic migration data from custom and commercial gradient gels

    Directory of Open Access Journals (Sweden)

    Andrew J. Miller


    Full Text Available This paper presents data related to the article “A method for easily customizable gradient gel electrophoresis” (A.J. Miller, B. Roman, E.M. Norstrom, 2016 [1]. Data is presented on the rate of electrophoretic migration of proteins in both hand-poured and commercially acquired acrylamide gradient gels. For each gel, migration of 9 polypeptides of various masses was measured upon completion of gel electrophoresis. Data are presented on the migration of proteins within separate lanes of the same gel as well as migration rates from multiple gels.

  10. Electrophoretic Partitioning of Proteins in Two-Phase Microflows

    DEFF Research Database (Denmark)

    Münchow, G.; Hardt, S.; Kutter, Jörg Peter


    conductor and decouples the channel from the electrodes, thus preventing bubble generation inside the separation channel. The experiments show that the electrophoretic transport of proteins between the laminated liquid phases is characterized by a strong asymmetry. When bovine serum albumin (BSA...... control of the formation and arrangement of liquid/liquid phase boundaries. The two immiscible phases which are injected separately into the microchannel are taken from a polyethylene glycol (PEG)-dextran system. The side walls of the channel are partially made of gel material which serves as an ion...

  11. Multidimensional capillary electrophoresis. (United States)

    Grochocki, Wojciech; Markuszewski, Michał J; Quirino, Joselito P


    Multidimensional separation where two or more orthogonal displacement mechanisms are combined is a promising approach to increase peak capacity in CE. The combinations allow dramatic improvement of analytical performance since the total peak capacity is given by a product of the peak capacities of all methods. The initial reports were concentrated on the construction of effective connections between capillaries for 2D analysis. Today, 2D and 3D CE systems are now able to separate real complex biological or environmental mixtures with good repeatability, improved resolution with minimal loss of sample. This review will present the developments in the field of multidimensional CE during the last 15 years. The endeavors in this specific field were on the development of interfaces, interface-free techniques including integrated separations, microdevices, and on-line sample concentration techniques to improve detection sensitivity.

  12. Simulated null-gravity environments as applied to electrophoretic separations of biological species (United States)

    Giannovario, J. A.; Griffin, R. N.


    The scale-up of electrophoretic separations to provide preparative quantities of materials has been hampered by gravity induced convection and sedimentation. The separation of biologically important species may be significantly enhanced by electrophoretic space processing. Simple demonstrations on past space flights have proven some principles. Several techniques have been evolved to study electrophoretic separations where the effects of gravity have been nullified or significantly reduced. These techniques employ mechanical design, density gradients and computer modeling. Utilization of these techniques for ground based studies will yield clues as to which biological species can be considered prime candidates for electrophoretic processing in zero-G.

  13. Finding the "bio" in biobased products: electrophoretic identification of wheat proteins in processed products. (United States)

    Robertson, George H; Hurkman, William J; Cao, Trung K; Tanaka, Charlene K; Orts, William J


    Verification of the biocontent in biobased or "green" products identifies genuine products, exposes counterfeit copies, supports or refutes content claims, and ensures consumer confidence. When the biocontent includes protein, elemental nitrogen analysis is insufficient for verification since non-protein, but nitrogen-rich, content also may be present. However, the proteins can be extracted, separated by electrophoretic methods, and detected by UV absorption, protein stain, or immunoblotting. We utilized capillary zone electrophoresis (CZE) to separate proteins in a gliadin fraction that had been dissolved in aqueous ethanol (70%) and polyacrylamide gel electrophoresis (PAGE) to separate proteins in a gliadin-plus-glutenin fraction that had been dissolved in water containing both sodium dodecyl sulfate (SDS) and a reducing agent, dithiothreitol (DTT). We sought to verify the presence of these wheat grain proteins in wheat bread, a wheat flake cereal, wheat beer, and an enclosure for an antique automobile ignition coil reputed to contain wheat gluten. Proteins extracted from commercial wheat, corn, and soy flours served as standards, and proteins from heat-altered wheat served as process condition references. This approach successfully identified wheat proteins in these products especially if the process temperature did not exceed 120 degrees C. Above this temperature attenuation was nearly complete for proteins analyzed by CZE, but wheat-like patterns could still be recognized by one- and two-dimensional PAGE. Immunoblots reacted with grain-specific antibodies confirmed the identities of the cereal component especially when the protein pattern was greatly altered by thermal modification, specific protein adsorption, or protein digestion. In addition to verifying that wheat proteins are present, the complementary use of these methods can reveal whether whole wheat gluten or merely an alcohol-soluble fraction had been used in the specific product and indicate the

  14. Haematological and electrophoretic characterisation of β-thalassaemia in Yunnan province of Southwestern China. (United States)

    Zhang, Jie; He, Jing; Mao, Xiaoqin; Zeng, Xiaohong; Chen, Hong; Su, Jie; Zhu, Baosheng


    β-Thalassaemia is widely found in Southwestern China. Characterisation of β-thalassaemia can improve screening and prenatal diagnosis for at-risk populations. A retrospective study. In this study, the levels of haemoglobin alpha 2 (HbA2) and haemoglobin alpha (HbA) were analysed by gender for a total of 15 067 subjects screened by capillary electrophoresis. The cut-off value with the highest accuracy was established to identify β-thalassaemia in 723 patients suspected to have this disease. Haematological and electrophoretic characterisation of eight common types of β-thalassaemia were analysed in 486 β-thalassaemia subjects. HbA levels were significantly higher in men than in women, but there was no significant difference on HbA2 levels. A new cut-off value for the diagnosis of β-thalassaemia (HbA2≥4.0%) with the highest accuracy was proposed for the studied populations. Haemoglobin (Hb) was significantly higher in men compared with women (pG) (HBB (β-globin):c.-78A>C) had significantly higher HbA2 values compared with other β-thalassaemia. Ethnic groups have diversified β-globin gene mutations and considerable haematological variations. Our study will lay the foundation for screening programmes and clinical management of thalassaemia in Southwestern China. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to

  15. Review of UV spectroscopic, chromatographic, and electrophoretic methods for the cholinesterase reactivating antidote pralidoxime (2-PAM). (United States)

    John, Harald; Blum, Marc-Michael


    Pralidoxime (2-PAM) belongs to the class of monopyridinium oximes with reactivating potency on cholinesterases inhibited by phosphylating organophosphorus compounds (OPC), for example, pesticides and nerve agents. 2-PAM represents an established antidote for the therapy of anticholinesterase poisoning since the late 1950s. Quite high therapeutic concentrations in human plasma (about 13 µg/ml) lead to concentrations in urine being about 100 times higher allowing the use of less sensitive analytical techniques that were used especially in the early years after 2-PAM was introduced. In this time (mid-1950s until the end of the 1970s) 2-PAM was most often analyzed by either paper chromatography or simple UV spectroscopic techniques omitting any sample separation step. These methods were displaced completely after the establishment of column liquid chromatography in the early 1980s. Since then, diverse techniques including cation exchange, size-exclusion, reversed-phase, and ligand-exchange chromatography have been introduced. Today, the most popular method for 2-PAM quantification is ion pair chromatography often combined with UV detection representing more than 50% of all column chromatographic procedures published. Furthermore, electrophoretic approaches by paper and capillary zone electrophoresis have been successfully used but are seldom applied. This review provides a commentary and exhaustive summary of analytical techniques applied to detect 2-PAM in pharmaceutical formulations and biological samples to characterize stability and pharmacokinetics as well as decomposition and biotransformation products. Separation techniques as well as diverse detectors are discussed in appropriate detail allowing comparison of individual preferences and limitations. In addition, novel data on mass spectrometric fragmentation of 2-PAM are provided.

  16. Fast and sensitive method to determine parabens by capillary electrophoresis using automatic reverse electrode polarity stacking mode: application to hair samples. (United States)

    Sako, Alysson V F; Dolzan, Maressa D; Micke, Gustavo Amadeu


    This paper describes a fast and sensitive method for the determination of methyl, ethyl, propyl, and butylparaben in hair samples by capillary electrophoresis using automatic reverse electrode polarity stacking mode. In the proposed method, solutions are injected using the flush command of the analysis software (940 mbar) and the polarity switching is carried out automatically immediately after the sample injection. The advantages compared with conventional stacking methods are the increased analytical frequency, repeatability, and inter-day precision. All analyses were performed in a fused silica capillary (50 cm, 41.5 cm in effective length, 50 μm i.d.), and the background electrolyte was composed of 20 mmol L(-1) sodium tetraborate in 10 % of methanol, pH 9.3. For the reverse polarity, -25 kV/35 s was applied followed by application of +30 kV for the electrophoretic run. Temperature was set at 20 °C, and all analytes were monitored at 297 nm. The method showed acceptable linearity (r (2) > 0.997) in the studied range of 0.1-5.0 mg L(-1), limits of detection below 0.017 mg L(-1), and inter-day, intra-day, and instrumental precision better than 6.2, 3.6, and 4.6 %, respectively. Considering parabens is widely used as a preservative in many products and the reported possibility of damage to the hair and also to human health caused by these compounds, the proposed method was applied to evaluate the adsorption of parabens in hair samples. The results indicate that there is a greater adsorption of methylparaben compared to the other parabens tested and also dyed hairs had a greater adsorption capacity for parabens than natural hairs.

  17. Recent innovations in protein separation on microchips by electrophoretic methods. (United States)

    Peng, Youyuan; Pallandre, Antoine; Tran, N Thuy; Taverna, Myriam


    Microchips for analytical purposes have attracted great attention over the last 20 years. In the present review, we focus on the most recent development of microchips for electrophoretic separation of proteins. This review starts with a short recalling about the microchips covering the basic microchip layout for CE and the commercial chips and microchip platforms. A short paragraph is dedicated to the surface treatment of microchips, which is of paramount importance in protein analysis. One section is dedicated to on-line sample pretreatment in microchips and summarizes different strategies to pre-concentrate or to purify proteins from complex matrixes. Most of the common modes used for CE of proteins have already been adapted to the chip format, while multidimensional approaches are still in progress. The different routes to achieve detection in microchip are also presented with a special attention to derivatization or labeling of proteins. Finally, several recent applications are mentioned. They highlight the great potential of electrophoretic separations of proteins in numerous fields such as biological, pharmaceutical or agricultural and food analysis. A bibliography with 151 references is provided covering papers published from 2000 to the early 2007.

  18. Capillary flow solder wettability test

    Energy Technology Data Exchange (ETDEWEB)

    Vianco, P.T.; Rejent, J.A.


    A test procedure was developed to assess the capillary flow wettability of solders inside of a confined geometry. The test geometry was comprised of two parallel plates with a controlled gap of constant thickness (0.008 cm, 0.018 cm, 0.025 cm, and 0.038 cm). Capillary flow was assessed by: (1) the meniscus or capillary rise of the solder within the gap, (2) the extent of void formation in the gap, and (3) the time-dependence of the risen solder film. Tests were performed with the lead-free solders.

  19. Analysis of Capillary Rise in Asymmetric Branch-Like Capillary (United States)

    Li, Caoxiong; Shen, Yinghao; Ge, Hongkui; Yang, Zhihui; Su, Shuai; Ren, Kai; Huang, Heyu


    Transport in porous media is common in nature, attracting many attentions for a long time. Tree-like network model is often used as a simplification for porous space, expressing the complexity of pore spaces instead of capillary bundle. To investigate spontaneous imbibition characteristics in this network, a dynamic asymmetric branch-like capillary model is used to represent basic network structure, using fractal method to represent tortuosity. This work investigates the influence of parameters on imbibition process in the branch-like capillary model. An analytical equation for the imbibition mass versus time is derived. Parameters from capillary structures to liquid properties are taken into account and analyzed based on the numerical solution of the equation. It is found that the imbibition process in asymmetric branch-like capillary model can be recognized by four sections and brunching tubes are positive for imbibition process. Concomitantly, meniscus arrest event is simulated and discussed. Moreover, the influence of parameters on imbibition process is discussed. These parameters can be classified as static and dynamic. Static parameters mainly change the capillary force, which are related to the ultimate imbibition mass or imbibition ability, while dynamic parameters mainly have influence on resistance of flowing fluid, which are related to the imbibition speed in the imbibition process.

  20. Selectivity in capillary electrokinetic separations

    NARCIS (Netherlands)

    de Zeeuw, R.A; de Jong, G.J.; Ensing, K


    This review gives a survey of selectivity modes in capillary electrophoresis separations in pharmaceutical analysis and bioanalysis. Despite the high efficiencies of these separation techniques, good selectivity is required to allow quantitation or identification of a Chemistry and Toxicology, parti

  1. DNA typing by capillary electrophoresis

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, N.


    Capillary electrophoresis is becoming more and more important in nucleic acid analysis including DNA sequencing, typing and disease gene measurements. This work summarized the background of DNA typing. The recent development of capillary electrophoresis was also discussed. The second part of the thesis showed the principle of DNA typing based on using the allelic ladder as the absolute standard ladder in capillary electrophoresis system. Future work will be focused on demonstrating DNA typing on multiplex loci and examples of disease diagnosis in the on-line format of PCR-CE. Also capillary array electrophoresis system should allow high throughput, fast speed DNA typing. Only the introduction and conclusions for this report are available here. A reprint was removed for separate processing.

  2. Nanocapillary electrokinetic tracking for monitoring charge fluctuations on a single nanoparticle

    NARCIS (Netherlands)

    Faez, Sanli; Samin, Sela; Baasanjav, Dashdeleg; Weidlich, Stefan; Schmidt, Markus; Mosk, Allard P.


    We introduce nanoCapillary Electrokinetic Tracking (nanoCET), an optofluidic platform for continuously measuring the electrophoretic mobility of a single colloidal nanoparticle or macromolecule in vitro with millisecond time resolution and high charge sensitivity. This platform is based on using a

  3. Application of capillary electrophoresis to the development and evaluation of aptamer affinity probes (United States)

    Sooter, Letha J.; McMasters, Sun; Stratis-Cullum, Dimitra N.


    Nucleic acid aptamers can exhibit high binding affinities for a wide variety of targets and have received much attention as molecular recognition elements for enhanced biosensor performance. These aptamers recognize target molecules through a combination of conformational dependent non-covalent interactions in aqueous media which can be investigated using capillary electrophoresis-based methods. In this paper we report on the results of our studies of the relative binding affinity of Campylobacter jejuni aptamers using a capillary electrophoretic immunoassay. Our results show preferential binding to C. jejuni over other common food pathogen bacteria. Capillary electrophoresis can also be used to develop new aptamer recognition elements using an in vitro selection process known as systematic evolution of ligand by exponential enrichment (SELEX). Recently, this process has been adapted to use capillary electrophoresis in an attempt to shorten the overall selection process. This smart selection of nucleic acid aptamers from a large diversity of a combinatorial DNA library is under optimization for the development of aptamers which bind to Army-relevant targets. This paper will include a discussion of the establishment of CE-SELEX methods for the future development of smart aptamer probes.

  4. Separation and determination of basic dyes formulated in hair care products by capillary electrophoresis. (United States)

    Masukawa, Yoshinori


    A capillary electrophoretic (CE) method for analyzing five basic dyes (Basic Red 76, Basic Brown 16, Basic Yellow 57, Basic Brown 17 and Basic Blue 99) sold under the trade name Arianor, which are commonly used in hair care products, has been established. A buffer of 100 mM acetic acid-ammonium acetate (50:50) containing 90% (v/v) methanol was employed in a fused-silica capillary of 40.0 cm x 50 microm I.D. with a bubble cell arrangement. Washing the capillary end immediately after injection was effective in preventing peak tailing of the basic dyes, which was due to their adsorption onto the outer wall of the capillary during the injection. Under these optimized conditions, acceptable results for reproducibility, limit of detection and quantitation, and linearity were obtained for the five authentic dyes tested. The recoveries of five authentic basic dyes spiked to three commercial hair care products also provided with acceptable results. This optimized CE method is useful for the analysis of mixed basic dyes in hair care products.

  5. Demonstrating Electrophoretic Separation in a Straight Paper Channel Delimited by a Hydrophobic Wax Barrier (United States)

    Xu, Chunxiu; Lin, Wanqi; Cai, Longfei


    A demonstration is described of electrophoretic separation of carmine and sunset yellow with a paper-based device. The channel in the paper device was fabricated by hand with a wax pen. Electrophoretic separation of carmine and sunset yellow was achieved within a few minutes by applying potential on the channel using a simple and inexpensive power…

  6. Electrophoretic deposition of nickel zinc ferrite nanoparticles into microstructured patterns

    Directory of Open Access Journals (Sweden)

    Stefan J. Kelly


    Full Text Available Using DC electric fields, nickel-zinc ferrite (Ni0.5Zn0.5Fe2O4 nanoparticles (Dh =16.6 ± 3.6 nm are electrophoretically deposited onto silicon substrates to form dense structures defined by photoresist molds. Parameters such as electric field, bath composition, and deposition time are tuned to produce films ranging in thickness from 177 to 805 nm. The deposited films exhibit soft magnetic properties with a saturation magnetization of 60 emu/g and a coercivity of 2.6 kA/m (33 Oe. Additionally, the influence of the photoresist mold on the deposit profile is studied, and patterned films with different shapes (lines, squares, circles, etc. are demonstrated with feature sizes down to 5 μm.

  7. Design of colored multilayered electrophoretic particles for electronic inks. (United States)

    Badila, M; Hébraud, A; Brochon, C; Hadziioannou, G


    The preparation of multilayered latex particles with surface functional groups suitable for use as electrophoretic particles in electronic inks has been studied. The particles are formed by dispersion polymerization and have a polystyrene core, slightly cross-linked with divinylbenzene (DVB), and a poly(methyl methacrylate) (PMMA) or a poly(acrylic acid) (PAA) shell. After grafting alkyl chains on their surface, the particles are negatively or positively charged and sterically stabilized against aggregation in nonpolar solvent. The particles were dyed by incorporation of Nigrosin during polymerization or by swelling in supercritical CO(2) in the presence of a dye. Particle size, morphology, incorporated dye content and zeta potential were determined. A dual-particle electronic ink based on a mixture of the colored multilayered particles and white hybrid TiO(2)-polymer particles was prepared and electro-optically tested.

  8. Mesoscale Particle-Based Model of Electrophoretic Deposition

    Energy Technology Data Exchange (ETDEWEB)

    Giera, Brian; Zepeda-Ruiz, Luis A.; Pascall, Andrew J.; Weisgraber, Todd H.


    We present and evaluate a semiempirical particle-based model of electrophoretic deposition using extensive mesoscale simulations. We analyze particle configurations in order to observe how colloids accumulate at the electrode and arrange into deposits. In agreement with existing continuum models, the thickness of the deposit increases linearly in time during deposition. Resulting colloidal deposits exhibit a transition between highly ordered and bulk disordered regions that can give rise to an appreciable density gradient under certain simulated conditions. The overall volume fraction increases and falls within a narrow range as the driving force due to the electric field increases and repulsive intercolloidal interactions decrease. We postulate ordering and stacking within the initial layer(s) dramatically impacts the microstructure of the deposits. We find a combination of parameters, i.e., electric field and suspension properties, whose interplay enhances colloidal ordering beyond the commonly known approach of only reducing the driving force.

  9. A simplified electrophoretic system for determining molecular weights of proteins. (United States)

    Manwell, C


    Electrophoresis of 31 different proteins in commercially prepared polyacrylamide gradient gels, Gradipore, yields a linear relationship between a hypothetical limiting pore size (the reciprocal of a limiting gel concentration, GL) and the cube root of the mol.wt., over the range 13 500-9000 000. A regression analysis of these data reveals that 98.6% of all variability in 1/GL is explained by the molecular weight, and this degree of accuracy compares favourably with existing methods for the determination of molecular weight by retardation of mobility in polyacrylamide. This new procedure has the additional advantages that molecular-weight standards can be obtained from readily available body fluids or tissue extracts by localizing enzymes and other proteins by standard histochemical methods, and that the same electrophoretic system can be used in determining molecular weights as is used in routine surveys of populations for individual and species variation in protein heterogeneity.

  10. Electrophoretic Capture of a DNA Chain into a Nanopore

    CERN Document Server

    Rowghanian, Payam


    Based on our formulation of the DNA electrophoresis near a pore [P. Rowghanian and A. Y. Grosberg, Phys. Rev. E 87, 042723 (2013)], we address the electrophoretic DNA capture into a nanopore as a steady-state process of particle absorption to a sink placed on top of an energy barrier. Reproducing the previously observed diffusion-limited and barrier-limited regimes as two different limits of the particle absorption process and matching the data, our model suggests a slower growth of the capture rate with the DNA length for very large DNA molecules than the previous model, motivating more experiments beyond the current range of electric field and DNA length. At moderately weak electric fields, our model predicts a different effect, stating that the DNA length dependence of the capture rate first disappears as the field is reduced and eventually reverses to a decreasing trend with $N$.

  11. Coating of calcium phosphate on biometallic materials by electrophoretic deposition

    Institute of Scientific and Technical Information of China (English)

    ZHANG Er-lin; YANG Ke


    Although biometallic materials have been used as bone implant materials for a long time, they are still detected as foreign bodies by human immune system. Calcium phosphate coating, especially hydroxyapatite(HA)coating attracts special attention due to its good biocompatibility. Being one of the effective methods used to deposit HA coating onto the metallic implant, the electrophoretic deposition(EPD) was reviewed in detail, including the process of EPD, the advantages and disadvantages, the important processing factors and the microstructure and mechanical properties of the coating. Research results on the processing and the coating show potential application of EPD process to the biomedical materials surface modification. In addition, the nanoparticulate HA coating as a new trend in HA coating was also introduced.

  12. Electrophoretic molecular karyotype of the dermatophyte Trichophyton rubrum

    Directory of Open Access Journals (Sweden)

    Cervelatti Eliane P.


    Full Text Available The electrophoretic karyotype of the dermatophyte Trichophyton rubrum was established using contour-clamped homogeneous electric field (CHEF gel electrophoresis. Five chromosomal bands of approximately 3.0 to 5.8 megabase pairs (Mbp each were observed and together indicated that 22.05 Mbp of the total genome are organized as chromosomal macromolecules. In addition to establishing the number and size of T. rubrum chromosomes, these results open perspectives for the construction of chromosome-specific libraries and for the physical mapping of genes of interest, thus permitting future gene linkage studies in this pathogen. A detailed understanding of the karyotype and genomic organization of T. rubrum should contribute to further genetic, taxonomic and epidemiological studies of this dermatophyte.

  13. Viscoelastic capillary flow: the case of whole blood

    Directory of Open Access Journals (Sweden)

    David Rabaud


    Full Text Available The dynamics of spontaneous capillary flow of Newtonian fluids is well-known and can be predicted by the Lucas-Washburn-Rideal (LWR law. However a wide variety of viscoelastic fluids such as alginate, xanthan and blood, does not exhibit the same Newtonian behavior.In this work we consider the Herschel-Bulkley (HB rheological model and Navier-Stokes equation to derive a generic expression that predicts the capillary flow of non-Newtonian fluids. The Herschel-Bulkley rheological model encompasses a wide variety of fluids, including the Power-law fluids (also called Ostwald fluids, the Bingham fluids and the Newtonian fluids. It will be shown that the proposed equation reduces to the Lucas-Washburn-Rideal law for Newtonian fluids and to the Weissenberg-Rabinowitsch-Mooney (WRM law for power-law fluids. Although HB model cannot reduce to Casson’s law, which is often used to model whole blood rheology, HB model can fit the whole blood rheology with the same accuracy.Our generalized expression for the capillary flow of non-Newtonian fluid was used to accurately fit capillary flow of whole blood. The capillary filling of a cylindrical microchannel by whole blood was monitored. The blood first exhibited a Newtonian behavior, then after 7 cm low shear stress and rouleaux formation made LWR fails to fit the data: the blood could not be considered as Newtonian anymore. This non-Newtonian behavior was successfully fit by the proposed equation.

  14. Wall modified photonic crystal fibre capillaries as porous layer open tubular columns for in-capillary micro-extraction and capillary chromatography. (United States)

    Kazarian, Artaches A; Sanz Rodriguez, Estrella; Deverell, Jeremy A; McCord, James; Muddiman, David C; Paull, Brett


    Wall modified photonic crystal fibre capillary columns for in-capillary micro-extraction and liquid chromatographic separations is presented. Columns contained 126 internal parallel 4 μm channels, each containing a wall bonded porous monolithic type polystyrene-divinylbenzene layer in open tubular column format (PLOT). Modification longitudinal homogeneity was monitored using scanning contactless conductivity detection and scanning electron microscopy. The multichannel open tubular capillary column showed channel diameter and polymer layer consistency of 4.2 ± 0.1 μm and 0.26 ± 0.02 μm respectively, and modification of 100% of the parallel channels with the monolithic polymer. The modified multi-channel capillaries were applied to the in-capillary micro-extraction of water samples. 500 μL of water samples containing single μg L(-1) levels of polyaromatic hydrocarbons were extracted at a flow rate of 10 μL min(-1), and eluted in 50 μL of acetonitrile for analysis using HPLC with fluorescence detection. HPLC LODs were 0.08, 0.02 and 0.05 μg L(-1) for acenaphthene, anthracene and pyrene, respectively, with extraction recoveries of between 77 and 103%. The modified capillaries were also investigated briefly for direct application to liquid chromatographic separations, with the retention and elution of a standard protein (cytochrome c) under isocratic conditions demonstrated, proving chromatographic potential of the new column format, with run-to-run retention time reproducibility of below 1%.

  15. Simulations of electrophoretic RNA transport through transmembrane carbon nanotubes. (United States)

    Zimmerli, Urs; Koumoutsakos, Petros


    The study of interactions between carbon nanotubes and cellular components, such as membranes and biomolecules, is fundamental for the rational design of nanodevices interfacing with biological systems. In this work, we use molecular dynamics simulations to study the electrophoretic transport of RNA through carbon nanotubes embedded in membranes. Decorated and naked carbon nanotubes are inserted into a dodecane membrane and a dimyristoylphosphatidylcholine lipid bilayer, and the system is subjected to electrostatic potential differences. The transport properties of this artificial pore are determined by the structural modifications of the membrane in the vicinity of the nanotube openings and they are quantified by the nonuniform electrostatic potential maps at the entrance and inside the nanotube. The pore is used to transport electrophoretically a short RNA segment and we find that the speed of translocation exhibits an exponential dependence on the applied potential differences. The RNA is transported while undergoing a repeated stacking and unstacking process, affected by steric interactions with the membrane headgroups and by hydrophobic interaction with the walls of the nanotube. The RNA is structurally reorganized inside the nanotube, with its backbone solvated by water molecules near the axis of the tube and its bases aligned with the nanotube walls. Upon exiting the pore, the RNA interacts with the membrane headgroups and remains attached to the dodecane membrane while it is expelled into the solvent in the case of the lipid bilayer. The results of the simulations detail processes of molecular transport into cellular compartments through manufactured nanopores and they are discussed in the context of applications in biotechnology and nanomedicine.

  16. Electrophoretic deposition of ultrasonicated and functionalized nanomaterials for multifunctional composites (United States)

    An, Qi

    Recent advances in the synthesis and characterization of nanostructured composite materials have enabled a broad range of opportunities for engineering the properties of polymer-matrix materials. Carbon nanotubes (CNTs) are known to have exceptional mechanical, electrical and thermal properties. Because of their small size, CNTs can occupy regions between traditional micro-scale reinforcements and create a hierarchical micro/nano structure spanning several orders of magnitude. Since CNTs possess critical reinforcement dimensions below 100 nm, new opportunities exist for tailoring the fiber/matrix interphase regions and ultimately the mechanical and electrical performance of advanced fiber-composites with minimal impact on the fiber-dominated properties. This growing interest in nanoscale hybridization with conventional fiber reinforcement has highlighted the need to develop new processing techniques for successful CNT integration. In this work, a novel and industrially scalable approach for producing multi-scale hybrid carbon nanotube/fiber composites using an electrophoretic deposition (EPD) technique has been studied as an alternative to in situ chemical vapor deposition growth (CVD). EPD is a widely used industrial coating process employed in areas ranging from automotive to electronics production. The method has a number of benefits which include low energy use and the ability to homogenously coat complex shapes with well adhered films of controlled thickness and density. A stable aqueous dispersion of multi-walled carbon nanotubes (MWCNTs) was produced using a novel ozonolysis and ultrasonication (USO) technique that results in dispersion and functionalization in a single step. Networks of CNTs span between adjacent fibers and the resulting composites exhibit significant increases in electrical conductivity and considerable improvements in the interlaminar shear strength and fracture toughness. In order to better understand the underlying mechanisms behind the

  17. Optimization of a nano-enzymatic reactor for on-line tryptic digestion of polypeptide conjugates by capillary electrophoresis. (United States)

    Ladner, Yoann; Coussot, Gaelle; Ebner, Stefanie; Ibrahim, Amal; Vidal, Laetitia; Perrin, Catherine


    This work aims at studying the optimization of an on-line capillary electrophoresis (CE)-based tryptic digestion methodology for the analysis of therapeutic polypeptides (PP). With this methodology, a mixture of surrogate peptide fragments and amino acid were produced on-line by trypsin cleavage (enzymatic digestion) and subsequently analyzed using the same capillary. The resulting automation of all steps such as injection, mixing, incubation, separation and detection minimizes the possible errors and saves experimental time. In this paper, we first study the differents parameters influencing PP cleavage inside the capillary (plug length, reactant concentration, incubation time, diffusion and electrophoretic plugs mixing). In a second part, the optimization of the electrophoretic separation conditions of generated hydrolysis products (nature, pH and ionic strength (I) of the background electrolyte (BGE)) is described. Using the optimized conditions, excellent repeatability was obtained in terms of separation (migration times) and proteolysis (number of products from enzymatic hydrolysis and corresponding amounts) demonstrating the robustness of the proposed methodology.

  18. Two-dimensional capillary electrophoresis using tangentially connected capillaries. (United States)

    Sahlin, Eskil


    A novel type of fused silica capillary system is described where channels with circular cross-sections are tangentially in contact with each other and connected through a small opening at the contact area. Since the channels are not crossing each other in the same plane, the capillaries can easily be filled with different solutions, i.e. different solutions will be in contact with each other at the contact point. The system has been used to perform different types of two-dimensional separations and the complete system is fully automated where a high voltage switch is used to control the location of the high voltage in the system. Using two model compounds it is demonstrated that a type of two-dimensional separation can be performed using capillary zone electrophoresis at two different pH values. It is also shown that a compound with acid/base properties can be concentrated using a dynamic pH junction mechanism when transferred from the first separation to the second separation. In addition, the system has been used to perform a comprehensive two-dimensional capillary electrophoresis separation of tryptic digest of bovine serum albumin using capillary zone electrophoresis followed by micellar electrokinetic chromatography.

  19. Capillary ion electrophoresis of inorganic anions and uric acid in human saliva using a polyvinyl alcohol coated capillary column and hexamethonium chloride as additive of background electrolyte. (United States)

    Mori, Masanobu; Yamamoto, Tsukasa; Kaseda, Maki; Yamada, Sachiko; Itabashi, Hideyuki


    A combination of polyvinyl alcohol chemically coated capillary (PVA capillary) and background electrolyte (BGE) with ion-pair reagent (hexamethonium dichloride, HMC) was used on capillary ion electrophoresis-UV detection (CIE-UV) for analysis of Br⁻, I⁻, NO₂⁻, NO₃⁻, SCN⁻ and uric acid in human saliva. The PVA capillary prepared in our laboratory minimized electro-osmotic flow (EOF) at the BGE in pH 3-10, and did not affect the UV detection at 210 nm by the PVA-layer on capillary wall. Therefore, use of the PVA capillary was suitable for sensitive UV detection for analyte anions, as well as suppression of protein adsorption. In this study, we optimized the BGE of 10 mM phosphate plus 10 mM HMC with applying a voltage of -15 kV. HMC as an additive to BGE could manipulate the electrophoretic mobility of anions, without electrostatic adsorption to the PVA capillary. The CIE-UV could separate and determine analyte anions in human saliva containing proteins by the direct injection without pretreatments such as dilution or deproteinization within 13 min. The relative standard deviations (n=10) were ranged of 0.5-1.6% in migration times, 2.2-6.8% in peak heights and 2.8-8.4% in peak areas. The limits of detection (S/N=3) were ranged of 3.42-6.87 μM. The peak height of anions in this system was gradually decreased through the successive injections of saliva samples, but the problem was successfully solved by periodically conditioning the PVA capillary. The quantifiability of anions in human saliva samples by the CIE-UV was evaluated through the recoveries by standard addition methods and comparison of other representative analytical methods, as well as identification by ion chromatography (IC). From the anion analyses in 12 different saliva samples, the CIE-UV demonstrated that can obtain obvious differences in concentrations of SCN⁻ between of smoker and non-smoker and those of uric acid between male and female with satisfactory results.

  20. Capillary electrophoresis of intact basic proteins using noncovalently triple-layer coated capillaries. (United States)

    Haselberg, Rob; de Jong, Gerhardus J; Somsen, Govert W


    The usefulness of a noncovalent, positively charged capillary coating for the efficient analysis of intact basic proteins with CE was studied. Capillaries were coated by subsequent flushing with solutions of 10% w/v Polybrene (PB), 3% w/v dextran sulfate (DS), and again 10% w/v PB. Coating characterization studies showed that stable coatings could be produced which exhibited a pH-independent and highly reproducible EOF. The PB-DS-PB coating was evaluated with Tris phosphate BGEs of various pH using the four basic model proteins: alpha-chymotrypsinogen A, ribonuclease A, cytochrome c, and lysozyme. Typical migration time RSDs for the proteins were less than 0.85%, and apparent plate numbers were above 125,000 using a capillary length of 40 cm. The high separation efficiency allowed detection of several minor impurities in the model proteins. Using a BGE of medium pH, the CE system with triple-layer coating appeared to be useful for the repeatable profiling of recombinant humanized mouse monoclonal immunoglobulin G(1) showing a characteristic pattern of glycoforms. The CE system was also applied to the characterization of two llama antibodies, which were produced in Saccharomyces cerevisiae, revealing the presence of a side product in one of the antibodies. The high migration time stability allowed the reliable determination of antibody-antigen binding by monitoring migration time shifts. Finally, the feasibility of using the PB-DS-PB coated capillaries for CE with mass spectrometric detection was shown by the characterization of the impure llama antibody sample.

  1. Impacts on oil recovery from capillary pressure and capillary heterogeneities

    Energy Technology Data Exchange (ETDEWEB)

    Bognoe, Thomas


    The main conclusions drawn from this thesis are; 7 scientific papers are published on a broad variety of subjects, and describes in detail the experiments and research treated in this thesis. Scientific research has been performed, investigating the subjects of capillary pressure and capillary heterogeneities from different angles. This thesis discusses the findings in this study and aims to illustrate the benefits of the results obtained for further development of other experiments, and/or even the industrial benefits in field development. The methods for wettability alteration have developed throughout the work. From producing heterogeneous wettability alterations, the methods have improved to giving both radial and lateral uniform wettability alterations, which also remains unaltered throughout the duration of the experimental work. The alteration of wettability is dependent on initial water saturation, flow rate, aging time and crude oil composition. Capillary pressure and relative permeability curves have been measured for core plugs at different wettabilities using conventional centrifuge methods. The trends observed are mostly consistent with theory. The production mechanisms of strongly and moderately water wet chalk has been investigated. At strongly water wet conditions in fractured chalk; the flow is governed by capillary forces, showing strong impact from the fractures. At moderately water wet conditions, the impact of the fractures are absent, and a dispersed water front is observed during the displacement. The oil recovery is about the same, at the two wettabilities. Fracture crossing mechanisms at the same wettability conditions have been mapped. And the observations are consistent with those of the water floods. During strongly water wet displacement, the fracture crossing is occurring once the inlet core has reached endpoint of spontaneous imbibition. At moderately water wet conditions the fracture crossing is less abrupt, and creation of wetting

  2. Non-Aqueous Capillary Electrophoresis (United States)

    Szumski, Michał; Buszewski, Bogusław

    Non-aqueous capillary electrophoresis and capillary electrochromatography are special variants of these techniques. Here, organic solvents or their mixtures with or without dissolved electrolytes are used as separation buffer or mobile phase, respectively. The most important features of non-aqueous systems are: better solubility of more hydrophobic ionic substances (many natural products) than in water, much less current and Joule heating allows for using highly concentrated buffers and/or larger capillary internal diameters, polar interactions are enhanced in organic solvents which is often highly advantageous in chiral separation systems. This chapter presents most frequently used solvents, their properties, as well as shows pH* scale which is often used in non-aqueous systems.

  3. Capillary imbibition in parallel tubes (United States)

    McRae, Oliver; Ramakrishnan, T. S.; Bird, James


    In modeling porous media two distinct approaches can be employed; the sample can be examined holistically, using global variables such as porosity, or it can be treated as a network of capillaries connected in series to various intermediate reservoirs. In forced imbibition this series-based description is sufficient to characterize the flow, due to the presence of an externally maintained pressure difference. However, in spontaneous imbibition, flow is driven by an internal capillary pressure, making it unclear whether a series-based model is appropriate. In this talk, we show using numerical simulations the dynamics of spontaneous imbibition in concentrically arranged capillary tubes. This geometry allows both tubes access to a semi-infinite reservoir but with inlets in close enough proximity to allow for interference. We compare and contrast the results of our simulations with theory and previous experiments. Schlumberger-Doll Research.

  4. Comparison of SEC and CE-SDS methods for monitoring hinge fragmentation in IgG1 monoclonal antibodies. (United States)

    Dada, Oluwatosin O; Rao, Romesh; Jones, Natalie; Jaya, Nomalie; Salas-Solano, Oscar


    Fragmentation of monoclonal antibodies is a critical quality attribute routinely monitored to assess the purity and integrity of the product from development to commercialization. Cleavage in the upper hinge region of IgG1 monoclonal antibodies is a common fragmentation pattern widely studied by size exclusion chromatography (SEC). Capillary electrophoresis with sodium dodecylsulfate (CE-SDS) is a well-established technique commonly used for monitoring antibody fragments as well, but its comparability to SEC in monitoring hinge fragments has not been established until now. We report a characterization strategy that establishes the correlation between hinge region fragments analyzed by SEC and CE-SDS. Monoclonal antibodies with elevated hinge fragments were generated under low pH stress conditions and analyzed by SEC and CE-SDS. The masses of the fragments generated were determined by LC-MS. Electrophoretic migration of the hinge fragmentation products in CE-SDS were determined based on their mass values. Comparative assessment of fragments by SEC, and CE-SDS showed similar correlation with incubation time. This study demonstrates that CE-SDS can be employed as a surrogate technique to SEC for monitoring hinge region fragments. Most importantly, combination of these techniques can be used to obtain comprehensive understanding of fragment related characteristics of therapeutic protein products. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. Electrical resistance of a capillary endothelium (United States)


    The electrical resistance of consecutive segments of capillaries has been determined by a method in which the microvessels were treated as a leaky, infinite cable. A two-dimensional analytical model to describe the potential field in response to intracapillary current injection was formulated. The model allowed determination of the electrical resistance from four sets of data: the capillary radius, the capillary length constant, the length constant in the mesentery perpendicular to the capillary, and the relative potential drop across the capillary wall. Of particular importance were the mesothelial membranes covering the mesenteric capillaries with resistances several times higher than that of the capillary endothelium. 27 frog mesenteric capillaries were characterized. The average resistance of the endothelium was 1.85 omega cm2, which compares well with earlier determinations of the ionic permeability of such capillaries. However, heterogeneity with respect to resistance was observed, that of 10 arterial capillaries being 3.0 omega cm2 as compared with 0.95 omega cm2 for 17 mid- and venous capillaries. The average in situ length constant was 99 micrometers for the arterial capillaries and 57 micrometers for the mid- and venous capillaries. It is likely that the ions that carry the current must move paracellularly, through junctions that are leaky to small solutes. PMID:7241087

  6. Capillary interactions in Pickering emulsions (United States)

    Guzowski, J.; Tasinkevych, M.; Dietrich, S.


    The effective capillary interaction potentials for small colloidal particles trapped at the surface of liquid droplets are calculated analytically. Pair potentials between capillary monopoles and dipoles, corresponding to particles floating on a droplet with a fixed center of mass and subjected to external forces and torques, respectively, exhibit a repulsion at large angular separations and an attraction at smaller separations, with the latter resembling the typical behavior for flat interfaces. This change of character is not observed for quadrupoles, corresponding to free particles on a mechanically isolated droplet. The analytical results are compared with the numerical minimization of the surface free energy of the droplet in the presence of spherical or ellipsoidal particles.

  7. In-capillary self-assembly and proteolytic cleavage of polyhistidine peptide capped quantum dots

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Jianhao; Li, Jingyan; Li, Jinchen; Liu, Feifei [School of Pharmaceutical Engineering and Life Science, Changzhou University, Changzhou, Jiangsu, 213164 (China); Zhou, Xiang; Yao, Yi [Changzhou Qianhong Bio-pharma Co. Ltd, Changzhou 213164, Jiangsu (China); Wang, Cheli [School of Pharmaceutical Engineering and Life Science, Changzhou University, Changzhou, Jiangsu, 213164 (China); Qiu, Lin, E-mail: [School of Pharmaceutical Engineering and Life Science, Changzhou University, Changzhou, Jiangsu, 213164 (China); Jiang, Pengju, E-mail: [School of Pharmaceutical Engineering and Life Science, Changzhou University, Changzhou, Jiangsu, 213164 (China); State Key Laboratory of Pharmaceutical Biotechnology, Nanjing, Jiangsu (China)


    A new method using fluorescence coupled capillary electrophoresis (CE-FL) for monitoring self-assembly and proteolytic cleavage of hexahistidine peptide capped quantum dots (QDs) inside a capillary has been developed in this report. QDs and the ATTO 590-labeled hexahistidine peptide (H6-ATTO) were injected into a capillary, sequentially. Their self-assembly inside the capillary was driven by a metal-affinity force which yielded a new fluorescence signal due to Förster resonance energy transfer (FRET). The highly efficient separation of fluorescent complexes and the FRET process were analyzed using CE-FL. The self-assembly of QDs and biomolecules was found to effectively take place inside the capillary. The kinetics of the assembly was monitored by CE-FL, and the approach was extended to the study of proteolytic cleavage of surface conjugated peptides. Being the first in-depth analysis of in-capillary nanoparticle–biomolecule assembly, the novel approach reported here provides inspiration to the development of QD-based FRET probes for biomedical applications. - Highlights: • We examined the self-assembly QDs with H6-ATTO inside a capillary. • We prove CE-FL to be a powerful method to resolve QDs-H6-ATTO complex. • We achieve chromatographic separation of QDs-H6-ATTO complex. • We discovered a novel strategy for the online detection of thrombin. • This technique integrated “injection, mixing, reaction, separation and detection”.

  8. Effects of analyte velocity modulation on the electroosmotic flow in capillary electrophoresis. (United States)

    Demana, T; Guhathakurta, U; Morris, M D


    Modulation of the electroosmotic flow in capillary zone electrophoresis by modulation of the driving voltage gives rise to a flow profile that changes between laminar and flat profiles. The changing flow profile induces a radial movement of sample species to and from the capillary surface. The induced sample concentration gradient can be monitored by carefully probing the capillary surface. The resulting signal is a derivative of the normal-shaped peak. Derivative-shaped peaks can be observed with cations, but not with anions. Anions are unable to approach the double-layer region and therefore are unaffected by the modulation process.

  9. Integrated Microfluidic Isolation of Aptamers Using Electrophoretic Oligonucleotide Manipulation (United States)

    Kim, Jinho; Olsen, Timothy R.; Zhu, Jing; Hilton, John P.; Yang, Kyung-Ae; Pei, Renjun; Stojanovic, Milan N.; Lin, Qiao


    We present a microfluidic approach to integrated isolation of DNA aptamers via systematic evolution of ligands by exponential enrichment (SELEX). The approach employs a microbead-based protocol for the processes of affinity selection and amplification of target-binding oligonucleotides, and an electrophoretic DNA manipulation scheme for the coupling of these processes, which are required to occur in different buffers. This achieves the full microfluidic integration of SELEX, thereby enabling highly efficient isolation of aptamers in drastically reduced times and with minimized consumption of biological material. The approach as such also offers broad target applicability by allowing selection of aptamers with respect to targets that are either surface-immobilized or solution-borne, potentially allowing aptamers to be developed as readily available affinity reagents for a wide range of targets. We demonstrate the utility of this approach on two different procedures, respectively for isolating aptamers against a surface-immobilized protein (immunoglobulin E) and a solution-phase small molecule (bisboronic acid in the presence of glucose). In both cases aptamer candidates were isolated in three rounds of SELEX within a total process time of approximately 10 hours.

  10. Origami paper-based fluidic batteries for portable electrophoretic devices. (United States)

    Chen, Sung-Sheng; Hu, Chih-Wei; Yu, I-Fan; Liao, Ying-Chih; Yang, Jing-Tang


    A manufacturing approach for paper-based fluidic batteries was developed based on the origami principle (three-dimension paper folding). Microfluidic channels were first created on a filter paper by a wax-printing method. Copper and aluminium sheets were then glued onto the paper as electrodes for the redox reaction. After the addition of copper sulphate and aluminium chloride, commonly available cellophane paper was attached as a membrane to separate the two electrodes. The resulting planar paper sheets were then folded into three-dimensional structures and compiled as a single battery with glue. The two half reactions (Al/Al(3+) and Cu/Cu(2+)) in the folded batteries provided an open-circuit potential from 0.82 V (one cell) to 5.0 V (eight cells in series) depending on the origami design. The prepared battery can provide a stable current of 500 μA and can light a regular LED for more than 65 min. These paper-based fluidic batteries in a set can also be compiled into a portable power bank to provide electric power for many electric or biomedical applications, such as LED lights and electrophoretic devices, as we report here.

  11. Fabrication of Electrophoretic Display Driven by Membrane Switch Array (United States)

    Senda, Kazuo; Usui, Hiroaki


    Electrophoretic devices (EPDs) and organic light-emitting diodes (OLEDs) have potential application in a large-area flexible displays, such as digital signage. For this purpose, a new backplane is capable of driving a large unit is required instead of thin-film transistors. In this paper we describe the fabrication of a membrane switch array suitable for driving large-scale flat-panel displays. An array of membrane switches was prepared using flexible printed circuit (FPC) technology of polyimide films, by combining low-temperature processes of lamination and copper electroplating methods. An array of 256 matrix switches with a pixel size of 7 mm2 was prepared to drive the EPD front panel. The switches were driven at a voltage of about 40 V and a frequency of 10 Hz. The operation characteristics agreed well with the result of the theoretical calculation. The calculation also suggested that driving voltage can be lowered by increasing pixel size. The contact resistance of the membrane switch was as low as 0.2 Ω, which implies the wide applicability of this device for driving a variety of elements.

  12. Electrophoretic High Molecular Weight DNA Purification Enables Optical Mapping (United States)

    Maydan, Jason; Thomas, Matthew; Tabanfar, Leyla; Mai, Laura; Poon, Hau-Ling; Pe, Joel; Hahn, Kristen; Goji, Noriko; Amoako, Kingsley; Marziali, Andre; Hanson, Dan


    Optical mapping generates an ordered restriction map from single, long DNA molecules. By overlapping restriction maps from multiple molecules, a physical map of entire chromosomes and genomes is constructed, greatly facilitating genome assembly in next generation sequencing projects, comparative genomics and strain typing. However, optical mapping relies on a method of preparing high quality DNA >250 kb in length, which can be challenging from some organisms and sample types. Here we demonstrate the ability of Boreal Genomics' Aurora instrument to provide pure, high molecular weight (HMW) DNA 250-1,100 kb in length, ideally suited for optical mapping. The Aurora performs electrophoretic DNA purification within an agarose gel in reusable cartridges, protecting long DNA molecules from shearing forces associated with liquid handling steps common to other purification methods. DNA can be purified directly from intact cells embedded and lysed within an agarose gel, preserving the highest molecular weight DNA possible while achieving exceptional levels of purity. The Aurora delivers DNA in a buffer solution, where DNA can be condensed and protected from shearing during recovery with a pipette. DNA is then returned to its regular coiled state by simple dilution prior to optical mapping. Here we present images showing HMW DNA purification taking place in the Aurora and subsequent images of single DNA molecules on OpGen's Argus® Optical Mapping System. Future work will focus on further optimizing Aurora HMW DNA purification to bias DNA recovery in favor of only the longest molecules in a sample, maximizing the benefits of optical mapping.

  13. [Electrophoretic studies of serum protein fractions in horses with laminitis]. (United States)

    Edinger, H; Miller, I; Stanek, C; Gemeiner, M


    The spectrum of serum proteins was evaluated in 46 horses affected with spontaneous laminitis and correlations between the severity of the disease and changes of the protein pattern were analyzed. The investigation was made in two groups; group A consisted of 21 horses of various breeds (warmblood, thoroughbred, standardbred) and group B of 25 ponys. Each group was subdivided according to the severity of the disease, using the OBEL-grade (OG) classification system. Serum proteins were separated by different one- and two-dimensional electrophoretic methods. Sera analysed by cellulose acetate electrophoresis showed a significant difference in the alpha 1-globulin fraction between OG II and OG IV affected horses. An increasing severity of the disease was correlated with a decrease of the alpha 1-globulins. The other protein fractions didn't show a uniform tendency. In group B there was a significant difference in the alpha 1-globulin fractions of OG II and OG III and in the beta 2-globulin fractions of OG I and OG II affected ponys. The acute phase proteins C3c, C4, Hp and fibronectin could be determined in a preliminary study in horse serum using the cross-reactivity of antibodies against the homologous human proteins.

  14. Alumina/Ce-Tzp Functionally Graded Materials by Electrophoretic Deposition

    Institute of Scientific and Technical Information of China (English)

    C.Zhao, J.Vleugels; O.Van Der Biest


    Cylindrical Al2O3/Ce-TZP functionally graded composites were fabricated by electrophoretic deposition and pressureless sintering in air. A continuous change in composition was realized by changing the composition of the suspension during deposition. In order to achieve full densification, a temperature above 1550℃ was necessary. The resultant FGM cylinder with a diameter of 5.6 mm shows the following structure: a central hole with a diameter less than 0.5 mm, a tough Ce-ZrO2 core with a diameter of about 3 mm, a gradient layer of about 1 mm, and a hard Al2O3-rich surface layer. The Ce-ZrO2 core has a Vickers hardness between 10and 11 GPa and an excellent toughness (>10 MPa√m). In the gradient layer, hardness and toughness vary continuously along the radius. The surface layer has a hardness of 15.5 GPa and a modest toughness of 2.5MPa√m.

  15. AC electrophoretic deposition of organic-inorganic composite coatings. (United States)

    Yoshioka, T; Chávez-Valdez, A; Roether, J A; Schubert, D W; Boccaccini, A R


    Alternating current electrophoretic deposition (AC-EPD) of polyacrylic acid (PAA)-titanium oxide (TiO(2)) nanoparticle composites on stainless steel electrodes was investigated in basic aqueous solution. AC square wave with duty cycle of 80% was applied at a frequency of 1 kHz. FTIR-ATR spectra showed that both AC and direct current (DC) EPD successfully deposited PAA-TiO(2) composites. The deposition rate using AC-EPD was lower than that obtained in direct current DC-EPD. However, the microstructure and surface morphology of the deposited composite coatings were different depending on the type of electric field applied. AC-EPD applied for not more than 5 min led to smooth films without bubble formation, while DC-EPD for 1 min or more showed deposits with microstructural defects possibly as result of water electrolysis. AC-EPD was thus for the first time demonstrated to be a suitable technique to deposit organic-inorganic composite coatings from aqueous suspensions, showing that applying a square wave and frequency of 1 kHz leads to uniform PAA-TiO(2) composite coatings on conductive materials.

  16. A fluorescence based non-radioactive electrophoretic mobility shift assay. (United States)

    Ruscher, K; Reuter, M; Kupper, D; Trendelenburg, G; Dirnagl, U; Meisel, A


    Electrophoretic mobility shift assay (EMSA) or gel shift assay is one of the most powerful methods for studying protein-DNA interactions. Typically, 32P-labeled DNA probes containing the sequence bound by the protein of interest are used in EMSA (rEMSA). Although rEMSA is sensitive and practicable, it relies on the handling of hazardous radioisotopes, and does not easily allow quantification. We developed a non-radioactive procedure using fluorescence (Cyano dye Cy5) labeled oligodeoxynucleotide duplexes as specific probes (fEMSA) and an automatic DNA sequencer for analysis. Testing different DNA-binding proteins (restriction endonuclease EcoRII, transcription factor NFkappaB and it's subunit p50) the results in fEMSA and rEMSA are similar in regard to quality, reproducibility, and sensitivity. fEMSA allows a semiquantitative screening of large amounts of samples for specific DNA binding activities and is, therefore, a high throughput technology for semiquantitative analysis of DNA-protein interaction.

  17. Electrophoretic mobility patterns of collagen following laser welding (United States)

    Bass, Lawrence S.; Moazami, Nader; Pocsidio, Joanne O.; Oz, Mehmet C.; LoGerfo, Paul; Treat, Michael R.


    Clinical application of laser vascular anastomosis in inhibited by a lack of understanding of its mechanism. Whether tissue fusion results from covalent or non-covalent bonding of collagen and other structural proteins is unknown. We compared electrophoretic mobility of collagen in laser treated and untreated specimens of rat tail tendon (>90% type I collagen) and rabbit aorta. Welding was performed, using tissue shrinkage as the clinical endpoint, using the 808 nm diode laser (power density 14 watts/cm2) and topical indocyanine green dye (max absorption 805 nm). Collagen was extracted with 8 M urea (denaturing), 0.5 M acetic acid (non-denaturing) and acetic acid/pepsin (cleaves non- helical protein). Mobility patterns on gel electrophoresis (SDS-PAGE) after urea or acetic acid extraction were identical in the lasered and control tendon and vessel (confirmed by optical densitometry), revealing no evidence of formation of novel covalent bonds. Alpha and beta band intensity was diminished in pepsin incubated lasered specimens compared with controls (optical density ratio 0.00 +/- 9 tendon, 0.65 +/- 0.12 aorta), indicating the presence of denatured collagen. With the laser parameters used, collagen is denatured without formation of covalent bonds, suggesting that non-covalent interaction between denatured collagen molecules may be responsible for the weld. Based on this mechanism, welding parameters can be chosen which produce collagen denaturation without cell death.

  18. Solubilization and electrophoretic characterization of select edible nut seed proteins. (United States)

    Sathe, Shridhar K; Venkatachalam, Mahesh; Sharma, Girdhari M; Kshirsagar, Harshal H; Teuber, Suzanne S; Roux, Kenneth H


    The solubility of almond, Brazil nut, cashew nut, hazelnut, macadamia, pecan, pine nut, pistachio, walnut, and peanut proteins in several aqueous solvents was qualitatively and quantitatively assessed. In addition, the effects of extraction time and ionic strength on protein solubility were also investigated. Electrophoresis and protein determination (Lowry, Bradford, and micro-Kjeldahl) methods were used for qualitative and quantitative assessment of proteins, respectively. Depending on the seed, buffer type and ionic strength significantly affected protein solubility. The results suggest that buffered sodium borate (BSB; 0.1 M H(3)BO(3), 0.025 M Na(2)B(4)O(7), 0.075 M NaCl, pH 8.45) optimally solubilizes nut seed proteins. Qualitative differences in seed protein electrophoretic profiles were revealed. For a specific seed type, these differences were dependent on the solvent(s) used to solubilize the seed proteins. SDS-PAGE results suggest the polypeptide molecular mass range for the tree nut seed proteins to be 3-100 kDa. The results of native IEF suggested that the proteins were mainly acidic, with a pI range from >4.5 to <7.0. Western immunoblotting experiments indicated that rabbit polyclonal antibodies recognized substantially the same polypeptides as those recognized by the corresponding pooled patient sera IgE.

  19. An improved driving waveform reference grayscale of electrophoretic displays (United States)

    Wang, Li; Yi, Zichuan; Peng, Bao; Zhou, Guofu


    Driving waveform is an important component for gray scale display on the electrophoretic display (EPD). In the traditional driving waveform, a white reference gray scale is formed before writing a new image. However, the reflectance value can not reach agreement in each gray scale transformation. In this paper, a new driving waveform, which has a short waiting time after the formation of reference gray scale, is proposed to improve the consistency of reference gray scale. Firstly, the property of the particles in the microcapsule is analyzed and the change of the EPD reflectance after the white reference gray scale formation is studied. Secondly, the reflectance change curve is fitted by using polynomial and the duration of the waiting time is determined. Thirdly, a set of the new driving waveform is designed by using the rule of DC balance and some real E-ink commercial EPDs are used to test the performance. Experimental results show that the effect of the new driving waveform has a better performance than traditional waveforms.

  20. Capillary thinning of polymeric filaments

    DEFF Research Database (Denmark)

    Kolte, Mette Irene; Szabo, Peter


    The capillary thinning of filaments of a Newtonian polybutene fluid and a viscoelastic polyisobutylene solution are analyzed experimentally and by means of numerical simulation. The experimental procedure is as follows. Initially, a liquid sample is placed between two cylindrical plates. Then, th...... and quantified. (C) 1999 The Society of Rheology. [S0148-6055(99)00103-0]....

  1. Ion guiding in alumina capillaries

    DEFF Research Database (Denmark)

    Juhász, Z.; Sulik, B.; Biri, S.


    Transmission of a few keV impact energy Ne ions through capillaries in anodic alumina membranes has been studied with different ion counting methods using an energy dispersive electrostatic spectrometer, a multichannel plate (MCP) array and sensitive current-measurement. In the present work, we...

  2. Filling of charged cylindrical capillaries

    NARCIS (Netherlands)

    Das, Siddhartha; Chanda, Sourayon; Eijkel, J.C.T.; Tas, N.R.; Chakraborty, Suman; Mitra, Sushanta K.


    We provide an analytical model to describe the filling dynamics of horizontal cylindrical capillaries having charged walls. The presence of surface charge leads to two distinct effects: It leads to a retarding electrical force on the liquid column and also causes a reduced viscous drag force because

  3. Capillary waves and ellipsometry experiments (United States)

    Bonn, D.; Wegdam, G. H.


    The inclusion of higher-order terms in the capillary-wave Hamiltonian may reduce the contributions of these fluctuations to the ellipsometric coefficients. We show that the renormalization of capillary waves at a fluid-fluid interface by Sengers and van Leeuwen [Phys. Rev. A 39 (1989) 6346] using the wave vector-dependent surface tension that follows from the coupled mode theory by Meunier [Phys. France 48 (1987)1819] yields a satisfactory agreement with recent ellipsometry measurements by Schmidt [Phys. Rev. A 38 (1988) 567]. The interface is viewed upon as an intrinsic interface broadened by capillary waves. We suppose that the cutoff wave vector q_{max} that follows from mode-coupling theory marks the transition from the short-wavelength bulk-like fluctuations that contribute to the bare surface tension to the long-wavelength capillary wave-like fluctuations that contribute to the full surface tension. This enables us to calculate, without any adjustable parameters, both the ratio of the bare and experimental surface tension and the universal constant for the elliptical thickness of the interface. Both agree remarkably well with experimental values.

  4. DNA Sequencing Using capillary Electrophoresis

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Barry Karger


    The overall goal of this program was to develop capillary electrophoresis as the tool to be used to sequence for the first time the Human Genome. Our program was part of the Human Genome Project. In this work, we were highly successful and the replaceable polymer we developed, linear polyacrylamide, was used by the DOE sequencing lab in California to sequence a significant portion of the human genome using the MegaBase multiple capillary array electrophoresis instrument. In this final report, we summarize our efforts and success. We began our work by separating by capillary electrophoresis double strand oligonucleotides using cross-linked polyacrylamide gels in fused silica capillaries. This work showed the potential of the methodology. However, preparation of such cross-linked gel capillaries was difficult with poor reproducibility, and even more important, the columns were not very stable. We improved stability by using non-cross linked linear polyacrylamide. Here, the entangled linear chains could move when osmotic pressure (e.g. sample injection) was imposed on the polymer matrix. This relaxation of the polymer dissipated the stress in the column. Our next advance was to use significantly lower concentrations of the linear polyacrylamide that the polymer could be automatically blown out after each run and replaced with fresh linear polymer solution. In this way, a new column was available for each analytical run. Finally, while testing many linear polymers, we selected linear polyacrylamide as the best matrix as it was the most hydrophilic polymer available. Under our DOE program, we demonstrated initially the success of the linear polyacrylamide to separate double strand DNA. We note that the method is used even today to assay purity of double stranded DNA fragments. Our focus, of course, was on the separation of single stranded DNA for sequencing purposes. In one paper, we demonstrated the success of our approach in sequencing up to 500 bases. Other

  5. Draft Genome Sequences of Eight Nontypeable Haemophilus influenzae Strains Previously Characterized Using an Electrophoretic Typing Scheme. (United States)

    Mussa, Huda J; VanWagoner, Timothy M; Morton, Daniel J; Seale, Thomas W; Whitby, Paul W; Stull, Terrence L


    Nontypeable Haemophilus influenzae is an important cause of human disease. Strains were selected for genome sequencing to represent the breadth of nontypeable strains within the species, as previously defined by the electrophoretic mobility of 16 metabolic enzymes.

  6. Improved design of electrophoretic equipment for rapid sickle-cell-anemia screening (United States)

    Reddick, J. M.; Hirsch, I.


    Effective mass screening may be accomplished by modifying existing electrophoretic equipment in conjunction with multisample applicator used with cellulose-acetate-matrix test paper. Using this method, approximately 20 to 25 samples can undergo electrophoresis in 5 to 6 minutes.

  7. Transient isotachophoretic-electrophoretic separations of lanthanides with indirect laser-induced fluorescence detection. (United States)

    Church, M N; Spear, J D; Russo, R E; Klunder, G L; Grant, P M; Andresen, B D


    Indirect laser-induced fluorescence was used for the detection of several lanthanide species separated by capillary electrophoresis. Quinine sulfate was the fluorescent component of the background electrolyte, and α-hydroxyisobutyric acid was added as a complexing agent to enable the separation of analyte ions that have similar mobilities. The UV lines (333-364 nm) of an argon ion laser were used as the excitation source with a diode array detector for monitoring the fluorescent emission at 442 nm. Electrokinetic injections and transient isotachophoresis were implemented to stack the analyte ions into more concentrated zones. On-line preconcentration factors were determined to be ∼700 and resulted in limits of detection for La(3+), Ce(3+), Pr(3+), Nd(3+), Sm(3+), and Eu(3+) in the low-ppb range (6-11 nM).

  8. Method development and validation for the simultaneous determination of four coumarins in Saussurea superba by capillary zone electrophoresis. (United States)

    Chen, Juan; Chen, Li; Zhang, Hong-Li; Shi, Yan-Ping


    A capillary zone electrophoretic method has been developed for the determination of four coumarins--skimmin, scopolin, scopoletin, and umbelliferone-in Saussurea superba with UV detection at 254 nm. The capillary temperature was kept constant at 25 degrees C. Effects of buffer pH, electrolyte concentration, organic modifier, and applied voltage on migration behavior were studied systematically. The optimum conditions for separation were achieved by using 30 mM borate buffer at pH 9.02 containing 15% (v/v) methanol as the electrolyte and 25 kV as the applied voltage. For all analytes a good linear regression relationship (r > 0.999) was obtained between peak area and concentration over a relatively wide range. The method was validated for repeatability, precision, and accuracy. The validated method was successfully applied to the simultaneous determination of the four analytes in S. superba.

  9. Optimization strategies for separation of sulfadiazines using Box-Behnken design by liquid chromatography and capillary electrophoresis

    Institute of Scientific and Technical Information of China (English)

    GONG Wen-jun; ZHANG Yu-ping; ZHANG Yi-Jun; XU Guang-ri; WEI Xin-jun; LEE Kwang-pill


    Development of effective chromatographic or electrophoretic separation involves judicious deciding of selection of optimal experimental conditions that can provide an adequate resolution at a reasonable run time for the separation of interested components. Box-Behnken factorial design was effectively applied for the separation optimization of eight structurally related sulfonamides using capillary zone electrophorosis and reverse high performance liquid chromatography. Optimum values for volume ratio of THF to H2O in eluent, column temperature and flow rate of eluent are found as 12 to 88, 35 ℃ and 1.0 mL/min, respectively.Box-Behnken modified optimization model is extended to separation by capillary electrophoresis (CE). While using CE, a satisfactory separation is achieved with a minimum resolution larger than 1.0 for a separation time less than 10 min.

  10. Coated capillaries with highly charged polyelectrolytes and carbon nanotubes co-aggregated with sodium dodecyl sulphate for the analysis of sulfonylureas by capillary electrophoresis. (United States)

    El-Debs, Racha; Nehmé, Reine; Claude, Bérengère; Motteau, Solène; Togola, Anne; Berho, Catherine; Morin, Philippe


    Sulfonylureas (SUs) are one of the most widely used herbicides to control weeds in crops. Herein, capillary electrophoresis (CE) was used to determine four sulfonylureas in natural waters, namely chlorsulfuron (CS), iodosulfuron methyl (IM), metsulfuron methyl (MSM) and mesosulfuron methyl (MSS). First of all, a bare silica capillary was chosen with 10mM of 1-butyl-3-methylimidazolium tetrafluoroborate (bminBF4) as electrophoretic buffer (pH 9.6) containing 2 mg L(-1) of surfactant-coated single-wall carbon nanotubes (SC-SWCNTs). A dramatic deviation in migration times was observed. Therefore, a poly(diallyldimethylammonium) chloride (PDADMAC) statically coated cationic capillary was used to improve repeatability and to alter the selectivity of the separation. The electroosmotic flow (EOF) measurement revealed that the SC-SWCNTs were strongly adsorbed at the surface of the PDADMAC coating even in the absence of the surfactant-coated nanotubes in the electrolyte buffer. Consequently, a stable strong cathodic EOF and excellent repeatabilities were obtained with relative standard deviations (RSDs) on migration times and on corrected peak areas below 0.9 and 1.5%, respectively. The separation of the SUs was conducted in only 6 min. No regeneration of the coating between analyses was necessary, and high peak efficiencies up to 173,000 theoretical plates were obtained. The bi-layer coating was subsequently used to analyze sulfonylureas in tap water, in several mineral waters as well as in underground waters spiked with SUs and directly injected into the CE capillary. Copyright © 2014 Elsevier B.V. All rights reserved.

  11. Effect of passage number on electrophoretic mobility distributions of cultured human embryonic kidney cells (United States)

    Kunze, M. E.


    A systematic investigation was undertaken to characterize population shifts that occur in cultured human embryonic kidney cells as a function of passage number in vitro after original explantation. This approach to cell population shift analysis follows the suggestion of Mehreshi, Klein and Revesz that perturbed cell populations can be characterized by electrophoretic mobility distributions if they contain subpopulations with different electrophoretic mobilities. It was shown that this is the case with early passage cultured human embryo cells.

  12. Determination of biogenic amines in beer and wine by capillary electrophoresis-tandem mass spectrometry. (United States)

    Daniel, Daniela; Dos Santos, Vagner Bezerra; Vidal, Denis Tadeu Rajh; do Lago, Claudimir Lucio


    A capillary electrophoresis-tandem mass spectrometry (CE-MS/MS) method for the simultaneous assessment of nine biogenic amines (spermine, spermidine, putrescine, cadaverine, histamine, phenylethylamine, tryptamine, tyramine, and urocanic acid) in commercial samples of beer and wine is introduced. The samples were submitted to a simple clean-up step with poly(vinylpolypyrrolidone) followed by filtration. Electrophoretic separation in a polyvinyl alcohol (PVA)-coated capillary using 0.5 mol L(-1) acetic acid (pH 2.5) as background electrolyte and detection by electrospray-tandem mass spectrometry was employed. The range of the correlation coefficients of the calibration curves of the analyzed compounds was 0.996-0.999, and the limits of detection and limits of quantification were in the range of 1-2 μg L(-1) and 3-8 μg L(-1), respectively. The recovery values for samples spiked at three concentration levels (0.2, 0.5, and 1.0 mg L(-1)) ranged from 87 to 113% with standard deviation not greater than 5.8%. The use of a PVA-coated silica capillary allows suppressing the electroosmotic flow and, consequently, increasing of the separation efficiency. The method was successfully used to determine biogenic amines in commercial samples of beer and wine.

  13. Chiral separation of benzoporphyrin derivative mono- and diacids by laser induced fluorescence-capillary electrophoresis. (United States)

    Peng, Xuejun; Sternberg, Ethan; Dolphin, David


    A method for the separation of benzoporphyrin derivative mono- and diacid (BPDMA, BPDDA) enantiomers by laser induced fluorescence-capillary electrophoresis (LIF-CE) has been developed. By using 300 mM borate buffer, pH 9.2, 25 mM sodium cholate and 10% acetronitrile as electrolyte, +10 kV electrokinetic sampling injection of 2 s and an applied +20 kV voltage across the ends of a 37 cm capillary (30 cm to the detector, 50 microm ID), all six BPD stereoisomers were baseline-separated within 20 min. Formation constants, free electrophoretic and complexation mobilities with borate and cholate were determined based on dynamic complexation capillary electrophoresis theory. The BPD enantiomers can be quantitatively determined in the range of 10(-2)-10(-5) mg mL(-1). The correlation coefficients (r2) of the least-squares linear regression analysis of the BPD enantiomers are in the range of 0.9914-0.9997. Their limits of detection are 2.18-3.5 x 10(-3) mg mL(-1). The relative standard deviations for the separation were 2.90-4.64% (n = 10). In comparison with high-performance liquid chromatography (HPLC), CE has better resolution and efficiency. This separation method was successfully applied to the BPD enantiomers obtained from a matrix of bovine serum and from liposomally formulated material as well as from studies with rat, dog and human microsomes.

  14. Raman spectroscopy and capillary electrophoresis applied to forensic colour inkjet printer inks analysis. (United States)

    Król, Małgorzata; Karoly, Agnes; Kościelniak, Paweł


    Forensic laboratories are increasingly engaged in the examination of fraudulent documents, and what is important, in many cases these are inkjet-printed documents. That is why systematic approaches to inkjet printer inks comparison and identification have been carried out by both non-destructive and destructive methods. In this study, micro-Raman spectroscopy and capillary electrophoresis (CE) were applied to the analysis of colour inkjet printer inks. Micro-Raman spectroscopy was used to study the chemical composition of colour inks in situ on a paper surface. It helps to characterize and differentiate inkjet inks, and can be used to create a spectra database of inks taken from different cartridge brands and cartridge numbers. Capillary electrophoresis in micellar electrophoretic capillary chromatography mode was applied to separate colour and colourless components of inks, enabling group identification of those components which occur in a sufficient concentration (giving intensive peaks). Finally, on the basis of the obtained results, differentiation of the analysed inks was performed. Twenty-three samples of inkjet printer inks were examined and the discriminating power (DP) values for both presented methods were established in the routine work of experts during the result interpretation step. DP was found to be 94.0% (Raman) and 95.6% (CE) when all the analysed ink samples were taken into account, and it was 96.7% (Raman) and 98.4% (CE), when only cartridges with different index numbers were considered.

  15. Capillary zone electrophoresis analysis and detection of mid-spectrum biological warfare agents

    Energy Technology Data Exchange (ETDEWEB)

    Boulet, C.A.; Townsley, C.


    DRE Suffield has initiated a research program to develop methods and equipment for field detection and laboratory identification of mid-spectrum agents, molecules of biological origin such as proteins, peptides and toxins. In this study, a highly efficient and reproducible capillary zone electrophoresis method was developed to separate and identify a series of nine peptides of defence interest: bradykinin, bradykinin fragment 1-5, substance P,ARG8-vasopressin, luteinizing hormone releasing hormone, bombesin, leucine enkephalin, methionine enkephalin, and oxytocin. Using a 50 micrometer x 47 cm capillary column, 22.5 kV separation voltage and a 100 mM pH 2.5 phosphate buffer, all nine peptide could separated in under 10 minutes. Three strategies, which could be used in a fully automated field detection and identification system, were demonstrated for the identification of unknown peptides: comparison of migration times, comparison of electrophoretic mobilities, and co-injection of multiple reference standards. These experiments demonstrate that a separation based analytical method such as capillary electrophoresis could form the basis of a generic detection system for mid-spectrum protein and peptide toxins.

  16. Characterization and Study of Transgenic Cultivars by Capillary and Microchip Electrophoresis

    Directory of Open Access Journals (Sweden)

    Elena Domínguez Vega


    Full Text Available Advances in biotechnology have increased the demand for suitable analytical techniques for the analysis of genetically modified organisms. Study of the substantial equivalence, discrimination between transgenic and non-transgenic cultivars, study of the unintended effects caused by a genetic modification or their response to diverse situations or stress conditions (e.g., environmental, climatic, infections are some of the concerns that need to be addressed. Capillary electrophoresis (CE is emerging as an alternative to conventional techniques for the study and characterization of genetically modified organisms. This article reviews the most recent applications of CE for the analysis and characterization of transgenic cultivars in the last five years. Different strategies have been described depending on the level analyzed (DNA, proteins or metabolites. Capillary gel electrophoresis (CGE has shown to be particularly useful for the analysis of DNA fragments amplified by PCR. Metabolites and proteins have been mainly separated using capillary zone electrophoresis (CZE using UV and MS detection. Electrophoretic chips have also proven their ability in the analysis of transgenic cultivars and a section describing the new applications is also included.

  17. Nonaqueous capillary electrophoresis of imatinib mesylate and related substances. (United States)

    Ye, Lei; Huang, Yifei; Li, Jian; Xiang, Guangya; Xu, Li


    In the present study, nonaqueous capillary electrophoretic separation of imatinib mesylate (IM) and related substances, N-(5-amino-2-methylphenyl)-4-(3-pyridyl)-2-pyrimidinamine (PYA), N-(4-methyl-3-(4-(pyridin-3-yl)pyrimidin-2-ylamino)phenyl)-4-((piperazin-1-yl)methyl) benzamide (NDI) and 4-chloromethyl-N-(4-methyl-3-((4-(pyridin-3-yl) pyrimidin-2-yl) amino) phenyl) benzamide (CPB) was developed. The influential factors affecting separation, including type and concentration of the electrolyte, applied voltage, and buffer modifier were investigated. Baseline separation of the studied analytes was obtained using a buffer of 50 mM Tris and 50 mM methanesulfonic acid in methanol at a apparent pH (pH*) of 1.65. To enhance the sensitivity, large-volume sample stacking was employed for online concentration. The strongest analytical signal with a suitable separation was achieved when the injection time was 100 s. The linearity ranges of PYA and NDI were 0.100-2.50 μg mL(-1), and that of CPB was 0.125-2.50 μg mL(-1), with good coefficients (r(2) > 0.9948). The relative standard deviations of intra- and interday were satisfactory. Under the optimized conditions, seven batches of the synthesized samples were analyzed and CPB was detected in two batches. Owing to its simplicity, effectiveness, and low price, the developed method is promising for quality control of IM.

  18. Electrochemical methods in conjunction with capillary and microchip electrophoresis. (United States)

    Mark, Jonas J P; Scholz, Rebekka; Matysik, Frank-Michael


    Electromigrative techniques such as capillary and microchip electrophoresis (CE and MCE) are inherently associated with various electrochemical phenomena. The electrolytic processes occurring in the buffer reservoirs have to be considered for a proper design of miniaturized electrophoretic systems and a suitable selection of buffer composition. In addition, the control of the electroosmotic flow plays a crucial role for the optimization of CE/MCE separations. Electroanalytical methods have significant importance in the field of detection in conjunction with CE/MCE. At present, amperometric detection and contactless conductivity detection are the predominating electrochemical detection methods for CE/MCE. This paper reviews the most recent trends in the field of electrochemical detection coupled to CE/MCE. The emphasis is on methodical developments and new applications that have been published over the past five years. A rather new way for the implementation of electrochemical methods into CE systems is the concept of electrochemically assisted injection which involves the electrochemical conversions of analytes during the injection step. This approach is particularly attractive in hyphenation to mass spectrometry (MS) as it widens the range of CE-MS applications. An overview of recent developments of electrochemically assisted injection coupled to CE is presented.

  19. Optimization of a microfluidic electrophoretic immunoassay using a Peltier cooler. (United States)

    Mukhitov, Nikita; Yi, Lian; Schrell, Adrian M; Roper, Michael G


    Successful analysis of electrophoretic affinity assays depends strongly on the preservation of the affinity complex during separations. Elevated separation temperatures due to Joule heating promotes complex dissociation leading to a reduction in sensitivity. Affinity assays performed in glass microfluidic devices may be especially prone to this problem due to poor heat dissipation due to the low thermal conductivity of glass and the large amount of bulk material surrounding separation channels. To address this limitation, a method to cool a glass microfluidic chip for performing an affinity assay for insulin was achieved by a Peltier cooler localized over the separation channel. The Peltier cooler allowed for rapid stabilization of temperatures, with 21°C the lowest temperature that was possible to use without producing detrimental thermal gradients throughout the device. The introduction of cooling improved the preservation of the affinity complex, with even passive cooling of the separation channel improving the amount of complex observed by 2-fold. Additionally, the capability to thermostabilize the separation channel allowed for utilization of higher separation voltages than what was possible without temperature control. Kinetic CE analysis was utilized as a diagnostic of the affinity assay and indicated that optimal conditions were at the highest separation voltage, 6 kV, and the lowest separation temperature, 21°C, leading to 3.4% dissociation of the complex peak during the separation. These optimum conditions were used to generate a calibration curve and produced 1 nM limits of detection, representing a 10-fold improvement over non-thermostated conditions. This methodology of cooling glass microfluidic devices for performing robust and high sensitivity affinity assays on microfluidic systems should be amenable in a number of applications.

  20. Salivary proteins and early childhood caries: A gel electrophoretic analysis

    Directory of Open Access Journals (Sweden)

    Sumati Bhalla


    Full Text Available Background: Early childhood caries (ECC is a common disease process that afflicts a large proportion of the child population worldwide. Extensive research in past indicates that it is the result of bacterial infection, also influenced by host and dietary factors. Current caries research seeks to identify risk factors as well as natural oral defenses that may protect against or prevent caries development. Saliva, in spite of being the strongest defense system, still has a wide array of properties and proteins whose role is yet not clearly known. Aim: To compare the resting human whole salivary characteristics in children with ECC and those who are caries free. Settings and Design: The study was conducted over a period of 9 months in 4- to 6-year-old 100 children comprising two groups - 50 with ECC and 50 caries free. Materials and Methods: The whole salivary flow rate, pH, mean protein concentration, and the electrophoretic profile of salivary proteins by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE were compared among both groups. Statistical Analysis: The SPSS (version 11.0 software package was used to conduct the chi-square, Fisher′s exact and Pearson′s chi-square tests to compare the data. Results: On gel electrophoresis, there was a significant difference among both groups with caries-free subjects having a higher number of proline-rich protein bands, substantiating the protective role of this protein. A significantly higher number of glycoprotein bands were observed in the whole saliva of subjects with ECC. A significant inverse correlation between the mean protein concentration and the whole salivary flow rate was observed in both groups.

  1. Electrophoretic deposition and constrained sintering of strontium titanate thick films

    Energy Technology Data Exchange (ETDEWEB)

    Amaral, Luís; Vilarinho, Paula M., E-mail:; Senos, Ana M.R.


    Thick films of functional oxides are currently substituting counterparts bulk ceramics, as in the case of low loss dielectrics. For SrTiO{sub 3} (ST) based compositions it is demonstrated that electrophoretic deposition (EPD), using acetone as a suspension media with iodine addition, is a suitable technology to fabricate 12 μm thick films. The microstructural analysis of the films sintered at 1500 °C shows that highly densified microstructures can be obtained and, by slightly varying the Sr/Ti stoichiometry in the powder composition, increased densification and grain size and enlargement of the distribution with decreasing Sr/Ti ratio can be observed. In spite of the high densification of the films, it is also demonstrated that due to the constraint imposed by the substrate a smaller grain size is observed in thick films as compared to equivalent bulk ceramics. In addition, a preferential vertical pore orientation is observed in ST thick films. These results may have broad implications if one considers that the dielectric losses and dielectric tunability is affected by pore orientation, since it affects the electric field distribution. - Highlights: • Nonstoichiometry effect on microstructure of constrained sintered thick films and bulk is similar. • Increased densification and grain size and enlargement of distribution with decreasing Sr/Ti ratio. • Independent of Sr/Ti ratio smaller grain size for thick films compared to ceramics. • Preferential vertical pore orientation for constrained sintering of thick films. • Anisotropic porosity as tailoring factor to engineer permittivity and tunability.

  2. Mixed Capillary Venous Retroperitoneal Hemangioma

    Directory of Open Access Journals (Sweden)

    Mohit Godar


    Full Text Available We report a case of mixed capillary venous hemangioma of the retroperitoneum in a 61-year-old man. Abdominal ultrasonography showed a mass to be hypoechoic with increased flow in color Doppler imaging. Dynamic contrast-enhanced computed tomography revealed a centripetal filling-in of the mass, located anterior to the left psoas muscle at the level of sacroiliac joint. On the basis of imaging features, preoperative diagnosis of hemangioma was considered and the mass was excised by laparoscopic method. Immunohistochemical studies were strongly positive for CD31 and CD34, and negative for calretinin, EMA, WT1, HMB45, Ki67, synaptophysin, and lymphatic endothelial cell marker D2–40. Histologically, the neoplasm was diagnosed as mixed capillary venous hemangioma.

  3. Capillary electrophoresis in food authenticity. (United States)

    Kvasnicka, Frantisek


    Food authenticity is a term which simply refers to whether the food purchased by the consumer matches its description. False description can occur in many forms, from the undeclared addition of water or other cheaper materials, or the wrong declaration of the amount of a particular ingredient in the product, to making false statements about the source of ingredients i.e., their geographic, plant, or animal origin. The aim of this review is to summarize applications of capillary electrophoresis in food authentication.

  4. Capillary electrophoresis systems and methods (United States)

    Dorairaj, Rathissh; Keynton, Robert S.; Roussel, Thomas J.; Crain, Mark M.; Jackson, Douglas J.; Walsh, Kevin M.; Naber, John F.; Baldwin, Richard P.; Franco, Danielle B.


    An embodiment of the invention is directed to a capillary electrophoresis apparatus comprising a plurality of separation micro-channels. A sample loading channel communicates with each of the plurality of separation channels. A driver circuit comprising a plurality of electrodes is configured to induce an electric field across each of the plurality of separation channels sufficient to cause analytes in the samples to migrate along each of the channels. The system further comprises a plurality of detectors configured to detect the analytes.

  5. Capillary stretching of elastic fibers (United States)

    Protiere, Suzie; Stone, Howard A.; Duprat, Camille


    Fibrous media consisting of constrained flexible fibers can be found in many engineered systems (membranes in filters, woven textile, matted paper). When such materials interact with a liquid, the presence of liquid/air interfaces induces capillary forces that deform the fibers. To model this interaction we study the behaviour of a finite volume of liquid deposited on two parallel flexible fibers clamped at both ends. A tension along the fibers is imposed and may be varied. We show that the system undergoes various morphological changes as the interfiber distance, the elasticity and the tension of the fibers are varied. For a certain range of parameters, the liquid spreads along the fibers and pulls them together, leading to the ``zipping'' of the fibers. This capillary adhesion can then be enhanced or reduced by changing the tension within the fibers. We will show that balancing stretching and capillary forces allows the prediction of this transition as well as the conditions for which detachment of the fibers occurs. These results may be used to prevent the clogging of fibrous membranes or to optimize the capture of liquids.

  6. Capillary Electrophoresis - Optical Detection Systems

    Energy Technology Data Exchange (ETDEWEB)

    Sepaniak, M. J.


    Molecular recognition systems are developed via molecular modeling and synthesis to enhance separation performance in capillary electrophoresis and optical detection methods for capillary electrophoresis. The underpinning theme of our work is the rational design and development of molecular recognition systems in chemical separations and analysis. There have been, however, some subtle and exciting shifts in our research paradigm during this period. Specifically, we have moved from mostly separations research to a good balance between separations and spectroscopic detection for separations. This shift is based on our perception that the pressing research challenges and needs in capillary electrophoresis and electrokinetic chromatography relate to the persistent detection and flow rate reproducibility limitations of these techniques (see page 1 of the accompanying Renewal Application for further discussion). In most of our work molecular recognition reagents are employed to provide selectivity and enhance performance. Also, an emerging trend is the use of these reagents with specially-prepared nano-scale materials. Although not part of our DOE BES-supported work, the modeling and synthesis of new receptors has indirectly supported the development of novel microcantilevers-based MEMS for the sensing of vapor and liquid phase analytes. This fortuitous overlap is briefly covered in this report. Several of the more significant publications that have resulted from our work are appended. To facilitate brevity we refer to these publications liberally in this progress report. Reference is also made to very recent work in the Background and Preliminary Studies Section of the Renewal Application.

  7. Chiral anion exchangers applied to capillary electrochromatography enantioseparation of oppositely charged chiral analytes: investigation of stationary and mobile phase parameters. (United States)

    Lämmerhofer, M; Tobler, E; Lindner, W


    Weak anion-exchange (WAX) type chiral stationary phases (CSPs) based on tert.-butyl carbamoyl quinine as chiral selector (SO) and different types of silica particles (porous and non-porous) as chromatographic support are evaluated in packed capillary electrochromatography (CEC). Their ability to resolve the enantiomers of negatively charged chiral analytes, e.g., N-derivatized amino acids, in the anion-exchange mode and their electrochromatographic characteristics are described in dependence of several mobile phase parameters (pH, buffer type and concentration, organic modifier type and concentration) and other experimental variables (electric field strength, capillary temperature). The inherent "zwitterionic" surface character of such silica-based WAX type CSPs (positively charged SO and negatively charged residual silanols) allows the reversal of the electroosmotic flow (EOF) towards the anode at pH values below the isoelectric point (pI) of the modified surface, whereas a cathodic EOF results at pH values above the pI. Since for negatively charged analytes also an electrophoretic transport increment has to be considered, which can be either in or against the EOF direction, several distinct modes of elution have been observed under different stationary phase and mobile phase conditions: (i) co-electrophoretic elution of the negatively charged solutes with the anodic EOF in the negative polarity mode, (ii) counter-electrophoretic elution with the cathodic EOF in the positive polarity mode, and (iii) electrophoretically dominated elution in the negative polarity mode with a cathodic EOF directed to the injection end of the capillary. Useful enantioseparations of chiral acids have been obtained with all three modes. Enantioselectivity values as high as under pressure-driven conditions and theoretical plate numbers up to 120000 per meter could be achieved under electrically driven conditions. A repeatability study yielded RSD values below 2% for retention times and

  8. Critical Capillary Number of Interfacial Film Displacement in a Capillary Tube

    CERN Document Server

    Yan, Changfei


    The role of surface tension and wettability in the dynamics of air-liquid interfaces during immiscible fluid displacement flows in capillary tube driven by pressure has been investigated. The contact angle and capillary number drive the force wetting processes which is controlled by the balance between the capillary and the viscous lubrication forces. The dynamic wetting condition with the critical capillary number is studied analytically and validated experimentally, which demonstrates that the critical capillary number is associated with the contact angle, slip length and capillary radius.

  9. Application of capillary electrophoresis to the simultaneous determination and stability study of four extensively used penicillin derivatives

    Directory of Open Access Journals (Sweden)

    Brigitta Simon


    Full Text Available The applicability of capillary electrophoresis for the analysis of four extensively used penicillin derivatives (benzylpenicillin, ampicillin, amoxicillin, oxacilllin has been studied. Because of structural similarities, the electrophoretic behavior of these derivatives is very similar; consequently an efficient separation using the conventional capillary zone electrophoresis is hard to be achieved. Their simultaneous separation was solved by using micellar electrokinetic capillary chromatography, the separation being based on the differential partition of the analytes between the micellar and aqueous phase. Using a buffer solution containing 25 mM sodium tetraborate and 100 mM sodium dodecyl sulfate as surfactant, at a pH of 9.3, applying a voltage of + 25 kV at a temperature of 25 °C, we achieved the simultaneous separation of the studied penicillin derivatives in less then 5 minutes. The separation conditions were optimized and the analytical performance of the method was evaluated in terms of precision, linearity, limit of detection, and quantification. Also, a simple capillary zone electrophoresis method was applied to study the stability of the studied penicillin derivatives in water at different temperatures, using ciprofloxacin hydrochloride as internal standard. It was observed that the extent of the hydrolysis of penicillins in water is highly dependent on the time and also temperature.

  10. Triple-channel portable capillary electrophoresis instrument with individual background electrolytes for the concurrent separations of anionic and cationic species. (United States)

    Mai, Thanh Duc; Le, Minh Duc; Sáiz, Jorge; Duong, Hong Anh; Koenka, Israel Joel; Pham, Hung Viet; Hauser, Peter C


    The portable capillary electrophoresis instrument is automated and features three independent channels with different background electrolytes to allow the concurrent optimized determination of three different categories of charged analytes. The fluidic system is based on a miniature manifold which is based on mechanically milled channels for injection of samples and buffers. The planar manifold pattern was designed to minimize the number of electronic valves required for each channel. The system utilizes pneumatic pressurization to transport solutions at the grounded as well as the high voltage side of the separation capillaries. The instrument has a compact design, with all components arranged in a briefcase with dimensions of 45 (w) × 35 (d) × 15 cm (h) and a weight of about 15 kg. It can operate continuously for 8 h in the battery-powered mode if only one electrophoresis channel is in use, or for about 2.5 h in the case of simultaneous employment of all three channels. The different operations, i.e. capillary flushing, rinsing of the interfaces at both capillary ends, sample injection and electrophoretic separation, are activated automatically with a control program featuring a graphical user interface. For demonstration, the system was employed successfully for the concurrent separation of different inorganic cations and anions, organic preservatives, additives and artificial sweeteners in various beverage and food matrices.

  11. A chip-type thin-layer electrochemical cell coupled with capillary electrophoresis for online separation of electrode reaction products

    Energy Technology Data Exchange (ETDEWEB)

    He, Jian-Bo, E-mail:; Cui, Ting; Zhang, Wen-Wen; Deng, Ning


    Graphical abstract: -- Highlights: •A new coupling of thin-layer electrolysis with capillary electrophoresis (CE). •Rapid electrolysis, direct sampling followed by online CE separation. •At least 13 products of quercetin oxidation were separated. •Thermodynamic and kinetic parameters were determined from CE peak areas. -- Abstract: A coupling technique of thin-layer electrolysis with high-performance capillary electrophoresis/UV–vis technique(EC/HPCE/UV–vis) is developed for online separation and determination of electrode reaction products. A chip-type thin-layer electrolytic (CTE) cell was designed and fabricated, which contains a capillary channel and a background electrolyte reservoir, allowing rapid electrolysis, direct sampling and online electrophoretic separation. This chip-type setup was characterized based on an electrophoresis expression of Nernst equation that was applied to the redox equilibrium of o-tolidine at different potentials. The utility of the method was demonstrated by separating and determining the electro-oxidation products of quercetin in different pH media. Two main products were always found in the studied time, potential and pH ranges. The variety of products increased not only with increasing potential but also with increasing pH value, and in total, at least 13 products were observed in the electropherograms. This work illustrates a novel example of capillary electrophoresis used online with thin-layer electrolysis to separate and detect electrode reaction products.

  12. Accurate determination of peptide phosphorylation stoichiometry via automated diagonal capillary electrophoresis coupled with mass spectrometry: proof of principle. (United States)

    Mou, Si; Sun, Liangliang; Dovichi, Norman J


    While reversible protein phosphorylation plays an important role in many cellular processes, simple and reliable measurement of the stoichiometry of phosphorylation can be challenging. This measurement is confounded by differences in the ionization efficiency of phosphorylated and unphosphorylated sites during analysis by mass spectrometry. Here, we demonstrate diagonal capillary electrophoresis-mass spectrometry for the accurate determination of this stoichiometry. Diagonal capillary electrophoresis is a two-dimensional separation method that incorporates an immobilized alkaline phosphatase microreactor at the distal end of the first capillary and employs identical electrophoretic separation modes in both dimensions. The first dimension is used to separate a mixture of the phosphorylated and unphosphorylated forms of a peptide. Fractions are parked in the reactor where they undergo complete dephosphorylation. The products are then periodically transferred to the second capillary and analyzed by mass spectrometry (MS). Because the phosphorylated and unphosphorylated forms differ in charge, they are well resolved in the first dimension separation. Because the unphosphorylated and dephosphorylated peptides are identical, there is no bias in ionization efficiency, and phosphorylation stoichiometry can be determined by the ratio of the signal of the two forms. A calibration curve was generated from mixtures of a phosphorylated standard peptide and its unphosphorylated form, prepared in a bovine serum albumin tryptic digest. This proof of principle experiment demonstrated a linear response across nearly 2 orders of magnitude in stoichiometry.

  13. Capillary zone electrophoresis for analysis of phytochelatins and other thiol peptides in complex biological samples derivatized with monobromobimane. (United States)

    Perez-Rama, Mónica; Torres Vaamonde, Enrique; Abalde Alonso, Julio


    A new method to improve the analysis of phytochelatins and their precursors (cysteine, gamma-Glu-Cys, and glutathione) derivatized with monobromobimane (mBrB) in complex biological samples by capillary zone electrophoresis is described. The effects of the background electrolyte pH, concentration, and different organic additives (acetonitrile, methanol, and trifluoroethanol) on the separation were studied to achieve optimum resolution and number of theoretical plates of the analyzed compounds in the electropherograms. Optimum separation of the thiol peptides was obtained with 150 mM phosphate buffer at pH 1.60. Separation efficiency was improved when 2.5% v/v methanol was added to the background electrolyte. The electrophoretic conditions were 13 kV and capillary dimensions with 30 cm length from the inlet to the detector (38 cm total length) and 50 microm inner diameter. The injection was by pressure at 50 mbar for 17 s. Under these conditions, the separation between desglycyl-peptides and phytochelatins was also achieved. We also describe the optimum conditions for the derivatization of biological samples with mBrB to increase electrophoretic sensitivity and number of theoretical plates. The improved method was shown to be simple, reproducible, selective, and accurate in measuring thiol peptides in complex biological samples, the detection limit being 2.5 microM glutathione at a wavelength of 390 nm.

  14. Progression of Diabetic Capillary Occlusion: A Model.

    Directory of Open Access Journals (Sweden)

    Xiao Fu


    Full Text Available An explanatory computational model is developed of the contiguous areas of retinal capillary loss which play a large role in diabetic maculapathy and diabetic retinal neovascularization. Strictly random leukocyte mediated capillary occlusion cannot explain the occurrence of large contiguous areas of retinal ischemia. Therefore occlusion of an individual capillary must increase the probability of occlusion of surrounding capillaries. A retinal perifoveal vascular sector as well as a peripheral retinal capillary network and a deleted hexagonal capillary network are modelled using Compucell3D. The perifoveal modelling produces a pattern of spreading capillary loss with associated macular edema. In the peripheral network, spreading ischemia results from the progressive loss of the ladder capillaries which connect peripheral arterioles and venules. System blood flow was elevated in the macular model before a later reduction in flow in cases with progression of capillary occlusions. Simulations differing only in initial vascular network structures but with identical dynamics for oxygen, growth factors and vascular occlusions, replicate key clinical observations of ischemia and macular edema in the posterior pole and ischemia in the retinal periphery. The simulation results also seem consistent with quantitative data on macular blood flow and qualitative data on venous oxygenation. One computational model applied to distinct capillary networks in different retinal regions yielded results comparable to clinical observations in those regions.

  15. Synthesis of functionally graded materials via electrophoretic deposition and sintering (United States)

    Wang, Xuan

    In this research, both the experiments and the modeling aspects of the net-shape fabrication of Functionally Graded Materials (FGM) by Electrophoretic Deposition (EPD) and consecutive sintering have been investigated. In order to obtain FGMs with desired final shape and properties, the issues regarding the shape evolution during sintering, the optimization of initial properties and composition profiles, and the fabrication of green components by EPD have been analyzed. In order to fabricate FGMs by the proposed technological sequence (EPD with the following sintering), the initial shape has to be optimized prior to sintering. In this research, the formulations to simulate sintering of an FGM were developed based on the continuum theory of sintering. A finite element sintering-modeling subroutine has been created and linked to the commercial finite element package ABAQUS. The shape changes of FGM disks during sintering were simulated. In order to obtain the desired final shape after sintering, an inverse modeling methodology was developed to optimize the initial shape. In order to fabricate the optimized initial shape of a green FGM specimen determined by the inverse continuum modeling of sintering, EPD of a number of FGMs was investigated. The FGM green specimens made of Al2O 3 and ZrO2 with the initial shape predicted by the inverse modeling, were deposited using self-designed equipments. The acetone-based suspension with n-butylamine as a particle-charging additive was used. The comparison of the shape between the sintered and the green FGM indicated that the developed experimental-theoretical methodology provided a reliable solution for near net shaping of complex 3-D FGM components. Other applications of EPD, such as in electronic packaging materials and zeolites, were also investigated. In order to fabricate functionally graded materials based on aligned porous structures, unidirectional freezing followed by freeze-drying and sintering has been investigated

  16. Development of a capillary electrophoresis method for the simultaneous determination of cephalosporins

    Directory of Open Access Journals (Sweden)

    Hancu Gabriel


    Full Text Available A rapid and simple capillary electrophoresis method has been developed for the simultaneous determination of six extensively used cephalosporin antibiotics (cefaclor, cefadroxil, cefalexin, cefuroxim, ceftazidim, ceftriaxon. The determination of cephalosporins was performed at a pH 6.8, using a 25 mM phospate - 25 mM borate mixed buffer, + 25 kV voltage at a temperature of 25 °C. We achieved a baseline separation in approximately 10 minutes. The separation resolution was increased by addition of an anionic surfactant, 50 mM sodium dodecyl sulfate, to the buffer solution. The proposed separation was evaluated on the basis of detection and quantification limits, effective electrophoretic mobility and relative standard deviation for migration times and peak areas.

  17. Direct Imaging of Single Plasmonic Metal Nanoparticles in Capillary with Laser Light-Sheet Scattering Imaging. (United States)

    Cao, Xuan; Feng, Jingjing; Pan, Qi; Xiong, Bin; He, Yan; Yeung, Edward S


    Understanding the heterogeneous distribution of the physical and chemical properties of plasmonic metal nanoparticles is fundamentally important to their basic and applied research. Traditionally, they are obtained either indirectly via bulk spectroscopic measurements plus electron microscopic characterizations or through single molecule/particle imaging of nanoparticles immobilized on planar substrates. In this study, by using light-sheet scattering microscopy with a supercontinuum white laser, highly sensitive imaging of individual metal nanoparticles (MNPs) flowing inside a capillary, driven by either pressure or electric field, was achieved for the first time. We demonstrate that single plasmonic nanoparticles with different size or chemical modification could be differentiated through their electrophoretic mobility in a few minutes. This technique could potentially be applied to high throughput characterization and evaluation of single metal nanoparticles as well as their dynamic interactions with various local environments.

  18. Investigation of interaction between the drug and cell membrane by capillary electrophoresis

    Institute of Scientific and Technical Information of China (English)


    By introducing cell membrane into electrophoretic buffer as pseudo-stationary phase,a novel capillary electrophoresis method was established to explore the interaction between drugs and cell membrane,where the interaction between citalopram and rabbit red blood cell membrane was used as an example. A series of concentrations of cell membrane were suspended into the running buffer by peak-shift method. The binding constant of citalopram to rabbit red blood cell membrane of 0.977 g-1·L was obtained after treatment of Scatchard plot. This method could provide not only a new way for the investigation on the interactions between drugs and cell membrane,but also a new approach for high throughput screening of the drug membrane permeability,biological activity,and evaluating drugs in vivo.

  19. High-shear-rate capillary viscometer for inkjet inks

    Energy Technology Data Exchange (ETDEWEB)

    Wang Xi [FUJIFILM Dimatix, Inc., Lebanon, New Hampshire 03766 (United States); Carr, Wallace W.; Bucknall, David G. [School of Polymer, Textile, and Fiber Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332 (United States); Morris, Jeffrey F. [Department of Chemical Engineering and Benjamin Levich Institute for Physico-Chemical Hydrodynamics, City College of New York, New York, New York 10031 (United States)


    A capillary viscometer developed to measure the apparent shear viscosity of inkjet inks at high apparent shear rates encountered during inkjet printing is described. By using the Weissenberg-Rabinowitsch equation, true shear viscosity versus true shear rate is obtained. The device is comprised of a constant-flow generator, a static pressure monitoring device, a high precision submillimeter capillary die, and a high stiffness flow path. The system, which is calibrated using standard Newtonian low-viscosity silicone oil, can be easily operated and maintained. Results for measurement of the shear-rate-dependent viscosity of carbon-black pigmented water-based inkjet inks at shear rates up to 2x10{sup 5} s{sup -1} are discussed. The Cross model was found to closely fit the experimental data. Inkjet ink samples with similar low-shear-rate viscosities exhibited significantly different shear viscosities at high shear rates depending on particle loading.

  20. Chromatographic and electrophoretic assessment of Filgrastim biosimilars in pharmaceutical formulations. (United States)

    Shaltout, Eman L; Al-Ghobashy, Medhat A; Fathalla, Faten A; Salem, Maissa Y


    An orthogonal testing protocol was developed and validated to assess the quality of Filgrastim biosimilars. Results were compared to those obtained from the innovator product. Initial screening was carried out using reducing and non-reducing gel electrophoresis. RP-LC was employed for the determination of Filgrastim in the presence of its oxidative degradation products. SEC and CIEF were used under non-denaturing conditions to reveal high molecular weight and charged impurities, respectively. RP-LC assay was found accurate (99.78±0.89) and precise over a linear concentration range of 9.38-300.00μg/ml with a LOD of 8.26μg/ml (0.44mM). SEC was carried out over a molecular weight range of 5.0-150.0kDa. CIEF was optimized using neutrally coated capillaries over a wide-range pH gradient (pH 3.0-10.0). Differences between the studied products were revealed using all these techniques. Impurities above the acceptable limits were detected in both biosimilar products. CIEF revealed heterogeneity in the active ingredient that has not been investigated by the manufacturers. Correlation of the obtained results indicated the presence of not only product-related impurities, but also process-related impurities. Results confirmed the need for in-house validated orthogonal testing protocols to be developed by local regulatory authorities. This should prevent access of substandard biosimilars to price-sensitive markets.

  1. Ultrastructural, autoradiographic and electrophoretic examinations of Chara tomentosa spermiogenesis

    Directory of Open Access Journals (Sweden)

    Maria Kwiatkowska


    Full Text Available Ultrastructure of a spermatid nucleus changes many times during spermiogenesis. Condensed chromatin forms irregular clusters during phases I-II, a continuous ring adjacent to a nuclear envelope during phases III-V and a network occupying the whole nucleus during phase VI. In advanced spermiogenesis dense chromatin disappears and short randomly positioned fibrils arise, then long parallel ones are found (phase VIII which during phase IX form a lamellar structure. In mature spermatozoids (phase X chromatin becomes extremely condensed. 3H-arginine and 3H-lysine incorporation into spermatids during 2-min incubation is intensive during phases IN, decreases during phases VI, VII and becomes very low during phases VIII-IX. Capillary electrophoresis has shown that during Chara tomentosa spermiogenesis replacement of histones with basic proteins whose mobility is comparable to that of salmon protamines takes place. At the beginning of spermiogenesis core and linker histones are found in spermatids. During early spermiogenesis protamine-like proteins appear and their amount increases in late spermiogenesis when core histones are still present. In mature spermatozoids only protamine-like proteins represented by 3 fractions: 9.1 kDa, 9.6 kDa, 11.2 kDa are found. Disappearance of linker histones following their modification precedes disappearance of core histones. The results indicate that dynamic rearrangement of chromatin ultrastructure and aminoacid incorporation rate during spermiogenesis are reflected in basic nuclear protein changes.

  2. Controlled method of reducing electrophoretic mobility of macromolecules, particles, or cells (United States)

    Vanalstine, James M. (Inventor)


    A method of reducing electrophoretic mobility of macromolecules, particles, cells, and other substances is provided which comprises interacting in a conventional electrophoretic separating procedure, the substances with a polymer-linked affinity compound comprised of a hydrophilic neutral polymer such as polyethylene glycol bound to a second component such as a hydrophobic compound, an immunocompound such as an antibody or antibody active fragment, or a ligand such as a hormone, drug, antigen, or a hapten. The reduction of electrophoretic mobility achieved is directly proportional to the concentration of the polymer-linked affinity compound employed, and such reduction can comprise up to 100 percent for particular particles and cells. The present invention is advantageous in that electrophoretic separation can now be achieved for substances whose native surface charge structure had prevented them from being separated by normal electrophoretic means. Depending on the affinity component utilized, separation can be achieved on the basis of the specific/irreversible, specific/reversible, semi-specific/reversible, relatively nonspecific/reversible, or relatively nonspecific/irreversible ligand-substance interactions.

  3. Fabrication and kinetics study of nano-Al/NiO thermite film by electrophoretic deposition. (United States)

    Zhang, Daixiong; Li, Xueming


    Nano-Al/NiO thermites were successfully prepared as film by electrophoretic deposition (EPD). For the key issue of this EPD, a mixture solvent of ethanol-acetylacetone (1:1 in volume) containing 0.00025 M nitric acid was proved to be a suitable dispersion system for EPD. The kinetics of electrophoretic deposition for both nano-Al and nano-NiO were investigated; the linear relation between deposition weight and deposition time in short time and parabolic relation in prolonged time were observed in both EPDs. The critical transition time between linear deposition kinetics and parabolic deposition kinetics for nano-Al and nano-NiO were 20 and 10 min, respectively. The theoretical calculation of the kinetics of electrophoretic deposition revealed that the equivalence ratio of nano-Al/NiO thermites film would be affected by the behavior of electrophoretic deposition for nano-Al and nano-NiO. The equivalence ratio remained steady when the linear deposition kinetics dominated for both nano-Al and nano-NiO. The equivalence ratio would change with deposition time when deposition kinetics for nano-NiO changed into parabolic kinetics dominated after 10 min. Therefore, the rule was suggested to be suitable for other EPD of bicomposites. We also studied thermodynamic properties of electrophoretic nano-Al/NiO thermites film as well as combustion performance.

  4. A DC electrophoresis method for determining electrophoretic mobility through the pressure driven negation of electro osmosis (United States)

    Karam, Pascal; Pennathur, Sumita


    Characterization of the electrophoretic mobility and zeta potential of micro and nanoparticles is important for assessing properties such as stability, charge and size. In electrophoretic techniques for such characterization, the bulk fluid motion due to the interaction between the fluid and the charged surface must be accounted for. Unlike current industrial systems which rely on DLS and oscillating potentials to mitigate electroosmotic flow (EOF), we propose a simple alternative electrophoretic method for optically determining electrophoretic mobility using a DC electric fields. Specifically, we create a system where an adverse pressure gradient counters EOF, and design the geometry of the channel so that the flow profile of the pressure driven flow matches that of the EOF in large regions of the channel (ie. where we observe particle flow). Our specific COMSOL-optimized geometry is two large cross sectional areas adjacent to a central, high aspect ratio channel. We show that this effectively removes EOF from a large region of the channel and allows for the accurate optical characterization of electrophoretic particle mobility, no matter the wall charge or particle size.

  5. Mapping molecular adhesion sites inside SMIL coated capillaries using atomic force microscopy recognition imaging

    Energy Technology Data Exchange (ETDEWEB)

    Leitner, Michael [Institute of Biophysics, Johannes Kepler University Linz, Gruberstrasse 40, 4020 Linz (Austria); Stock, Lorenz G. [Division of Chemistry and Bioanalytics, Department of Molecular Biology, University Salzburg, Hellbrunnerstrasse 34, 5020 Salzburg (Austria); Christian Doppler Laboratory for Innovative Tools for the Characterization of Biosimilars, University Salzburg, Hellbrunnerstrasse 34, 5020 Salzburg (Austria); Traxler, Lukas [Institute of Biophysics, Johannes Kepler University Linz, Gruberstrasse 40, 4020 Linz (Austria); Leclercq, Laurent [Institut des Biomolécules Max Mousseron (IBMM, UMR 5247, CNRS, Université de Montpellier, Ecole Nationale Supérieure de Chimie de Montpellier), Place Eugène Bataillon, CC 1706, 34095 Montpellier (France); Bonazza, Klaus; Friedbacher, Gernot [Institute of Chemical Technologies and Analytics, Vienna University of Technology, Getreidemarkt 9/164, 1060 Vienna (Austria); Cottet, Hervé [Institut des Biomolécules Max Mousseron (IBMM, UMR 5247, CNRS, Université de Montpellier, Ecole Nationale Supérieure de Chimie de Montpellier), Place Eugène Bataillon, CC 1706, 34095 Montpellier (France); Stutz, Hanno [Division of Chemistry and Bioanalytics, Department of Molecular Biology, University Salzburg, Hellbrunnerstrasse 34, 5020 Salzburg (Austria); Christian Doppler Laboratory for Innovative Tools for the Characterization of Biosimilars, University Salzburg, Hellbrunnerstrasse 34, 5020 Salzburg (Austria); Ebner, Andreas, E-mail: [Institute of Biophysics, Johannes Kepler University Linz, Gruberstrasse 40, 4020 Linz (Austria)


    Capillary zone electrophoresis (CZE) is a powerful analytical technique for fast and efficient separation of different analytes ranging from small inorganic ions to large proteins. However electrophoretic resolution significantly depends on the coating of the inner capillary surface. High technical efforts like Successive Multiple Ionic Polymer Layer (SMIL) generation have been taken to develop stable coatings with switchable surface charges fulfilling the requirements needed for optimal separation. Although the performance can be easily proven in normalized test runs, characterization of the coating itself remains challenging. Atomic force microscopy (AFM) allows for topographical investigation of biological and analytical relevant surfaces with nanometer resolution and yields information about the surface roughness and homogeneity. Upgrading the scanning tip to a molecular biosensor by adhesive molecules (like partly inverted charged molecules) allows for performing topography and recognition imaging (TREC). As a result, simultaneously acquired sample topography and adhesion maps can be recorded. We optimized this technique for electrophoresis capillaries and investigated the charge distribution of differently composed and treated SMIL coatings. By using the positively charged protein avidin as a single molecule sensor, we compared these SMIL coatings with respect to negative charges, resulting in adhesion maps with nanometer resolution. The capability of TREC as a functional investigation technique at the nanoscale was successfully demonstrated. - Highlights: • SMIL coating allows generation of homogeneous ultra-flat surfaces. • Molecular electrostatic adhesion forces can be determined in the inner wall of CZE capillary with picoNewton accuracy. • Topographical images and simultaneously acquired adhesion maps yield morphological and chemical information at the nanoscale.

  6. DNA Sequencing Using capillary Electrophoresis

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Barry Karger


    The overall goal of this program was to develop capillary electrophoresis as the tool to be used to sequence for the first time the Human Genome. Our program was part of the Human Genome Project. In this work, we were highly successful and the replaceable polymer we developed, linear polyacrylamide, was used by the DOE sequencing lab in California to sequence a significant portion of the human genome using the MegaBase multiple capillary array electrophoresis instrument. In this final report, we summarize our efforts and success. We began our work by separating by capillary electrophoresis double strand oligonucleotides using cross-linked polyacrylamide gels in fused silica capillaries. This work showed the potential of the methodology. However, preparation of such cross-linked gel capillaries was difficult with poor reproducibility, and even more important, the columns were not very stable. We improved stability by using non-cross linked linear polyacrylamide. Here, the entangled linear chains could move when osmotic pressure (e.g. sample injection) was imposed on the polymer matrix. This relaxation of the polymer dissipated the stress in the column. Our next advance was to use significantly lower concentrations of the linear polyacrylamide that the polymer could be automatically blown out after each run and replaced with fresh linear polymer solution. In this way, a new column was available for each analytical run. Finally, while testing many linear polymers, we selected linear polyacrylamide as the best matrix as it was the most hydrophilic polymer available. Under our DOE program, we demonstrated initially the success of the linear polyacrylamide to separate double strand DNA. We note that the method is used even today to assay purity of double stranded DNA fragments. Our focus, of course, was on the separation of single stranded DNA for sequencing purposes. In one paper, we demonstrated the success of our approach in sequencing up to 500 bases. Other

  7. Measurement of Liquid Viscosities in Tapered or Parabolic Capillaries. (United States)

    Ershov; Zorin; Starov


    The possibility of using tapered or parabolic capillaries for measurement of liquid viscosities is investigated both experimentally and theoretically. It is demonstrated that even small deviations in capillary radius from a constant value may substantially affect measurement results. Equations are derived which allow correct analysis of the measurement results in tapered or parabolic capillaries. The following cases are analyzed: a water imbibition into a tapered or parabolic capillary and displacement of one liquid by another immiscible liquid in tapered or parabolic capillaries. Two possibilities are considered: (a) the narrow end of the capillary as capillary inlet and (b) the wide end of the capillary as capillary inlet. Copyright 1999 Academic Press.

  8. The influence of nanoparticle aggregation on formation of ZrO{sub 2} electrolyte thin films by electrophoretic deposition

    Energy Technology Data Exchange (ETDEWEB)

    Kalinina, E.G., E-mail: [Institute of Electrophysics, Russian Academy of Sciences, Ural Branch, 106 Amundsen Street, 620016 Ekaterinburg (Russian Federation); Ural Federal University, 19 Mira Street, 620002 Ekaterinburg (Russian Federation); Efimov, A.A. [Moscow Institute of Physics and Technology, 9 Institutskii per., 141700 Dolgoprudny, Moscow Region (Russian Federation); Safronov, A.P. [Institute of Electrophysics, Russian Academy of Sciences, Ural Branch, 106 Amundsen Street, 620016 Ekaterinburg (Russian Federation); Ural Federal University, 19 Mira Street, 620002 Ekaterinburg (Russian Federation)


    The paper presents the results of the studies of electrically stabilized nonaqueous suspensions of ZrO{sub 2} stabilized by Y{sub 2}O{sub 3} (YSZ) nanoparticles with an average diameter of 11 nm for the formation of green films of electrolyte for solid oxide fuel cells. Nanoparticles were de-aggregated to different degrees, which were provided by the ultrasonic treatment and the centrifugation, and monitored by the dynamic light scattering. YSZ green thin films were obtained by the electrophoretic deposition (EPD) on dense lanthanum strontium manganite cathodes using suspensions with the average diameter of aggregates: 107; 66; 53 nm. To investigate the possibilities of EPD we used the model drying of the same suspensions cast upon the same substrates. It was shown that the structure and the morphology of the green films obtained by EPD was different compared to the films prepared by the model drying of the suspension. The drying of the stable suspension resulted in the formation of loose aggregates on the surface. The efficient packing of electrically stabilized particles was prevented by the forces of electrostatic repulsion between them. In the case of EPD the electrocoagulation of particles near the cathode takes place with the formation of dense aggregates. As a result, uncharged spherical aggregates with an average size of about 100–200 nm settle on the surface of the cathode and pack into a uniform dense coating suitable for the subsequent sintering of a gas-tight coating for the solid YSZ electrolyte. - Highlights: • Impact of nanoparticle aggregation on the electrophoretic deposition is studied. • Sedimentation of stabilized particles results in formation of loose aggregates. • The formation of dense layer is facilitated by electrocoagulation of particles.

  9. A New Conductivity Detector for Capillary Electrophoresis

    Institute of Scientific and Technical Information of China (English)


    A new conductivity detector for capillary electrophoresis consisting of an electrochemical cell and a conductive meter was developed. In the cell, the microelectrode and capillary were inserted through the cell wall and fixed by screws and sealing ring, the ends of microelectrode and capillary were located by a guide with two cross holes. LOD for K+ was 1.5×10-5 mol/L.

  10. Intracranial capillary hemangioma mimicking a dissociative disorder

    Directory of Open Access Journals (Sweden)

    Alexander Lacasse


    Full Text Available Capillary hemangiomas, hamartomatous proliferation of vascular endothelial cells, are rare in the central nervous system (CNS. Intracranial capillary hemangiomas presenting with reversible behavioral abnormalities and focal neurological deficits have rarely been reported. We report a case of CNS capillary hemangioma presenting with transient focal neurological deficits and behavioral abnormalities mimicking Ganser’s syndrome. Patient underwent total excision of the vascular malformation, resulting in complete resolution of his symptoms.

  11. Development and validation of a capillary electrophoresis method for determination of enantiomeric purity and related substances of esomeprazole in raw material and pellets. (United States)

    Estevez, Pablo; Flor, Sabrina; Boscolo, Oriana; Tripodi, Valeria; Lucangioli, Silvia


    A capillary electrophoresis method using CDs for quality control of esomeprazole (ESO) in terms of enantiomeric purity and related substances in raw material and pellets was developed. ESO is the S-enantiomer of omeprazole (OMZ). Several parameters were evaluated, including type and concentration of buffer and CD, concentration of additives and electrolyte pH. Resolution between the enantiomers of OMZ obtained for each parameter tested was calculated and the presence of the main related substance such as OMZ sulfone was carefully monitored. The optimized system consisted of 100 mM Tris-phosphate buffer pH 2.5 with 20 mM 2-hydroxypropyl-β-CD, 1 mM sodium dithionite, temperature at 15°C, voltage at 28 kV, and UV detection at 301 nm. Once optimized, the electrophoretic system was validated according to ICH guidelines. The limits of detection and quantification for R-OMZ were 0.6 μg/mL (0.06% w/w of ESO) and 2.0 μg/mL (0.2% w/w of ESO), respectively. A mean concentration of R-OMZ pellet samples of ESO. No other impurities were found in the samples under these conditions. Therefore, the developed method was found to be appropriate not only for enantiomeric quality control of ESO but also for the analysis of ESO and the main related substance in raw material and pharmaceutical formulations as well as for stability indicating studies.

  12. Oxygen exchange in silicone rubber capillaries. (United States)

    Heineken, F G; Predecki, P K; Filley, G F


    Capillaries of 7 and 12.5 mu diameter have been fabricated in silicone rubber. Whole blood treated with heparin has been perfused through these capillaries. Under flowing conditions, no clotting or other clumping effects have been observed and red cells appear to maintain a constant velocity. Oxygen transfer data to and from saline perfusing the 12.5 mu diameter capillaries have been obtained in order to determine how rapidly O2 will permeate the silicone rubber film. The data indicate that the capillaries simulate lung tissue oxygen exchange and will allow for the first time the experimental determination of oxygen exchange kinetics in flowing whole blood.

  13. Slope wavenumber spectrum models of capillary and capillary-gravity waves

    Institute of Scientific and Technical Information of China (English)

    贾永君; 张杰; 王岩峰


    Capillary and capillary-gravity waves possess a random character, and the slope wavenumber spectra of them can be used to represent mean distributions of wave energy with respect to spatial scale of variability. But simple and practical models of the slope wavenumber spectra have not been put forward so far. In this article, we address the accurate definition of the slope wavenumber spectra of water surface capillary and capillary-gravity waves. By combining the existing slope wavenumber models and using th...

  14. Vacuum scanning capillary photoemission microscopy

    DEFF Research Database (Denmark)

    Aseyev, S.A.; Cherkun, A P; Mironov, B N


    of a gold reflecting layer on a compact disc which has been illuminated by an unfocused laser beam with a wavelength 400nm, from a femtosecond laser with a beam size of 4mm. A quartz capillary with a 2-µm aperture has been used in the experiments. The period of gold microstructure, shown to be 1.6µ...... distribution of the recorded photoelectrons consisted of periodic mountain-valley strips, resembling the surface profile of the sample. Submicron spatial resolution has been achieved. This approach paves the way to study pulsed photodesorption of large organic molecular ions with high spatial and element...

  15. Capillary Bridges between Soft Substrates (United States)

    Wexler, Jason S.; Heard, Tiara M.; Stone, Howard A.


    A wetting droplet trapped in the thin gap between two elastic bodies will deflect the bodies towards one another. The deformation increases the total capillary adhesion force by increasing the contact radius and narrowing the gap height. For flat droplets, with a large ratio of radius to gap height, the Laplace pressure causes surface deformations that are orders of magnitude larger than those induced by a sessile droplet of the same radius. We present experiments, scalings, and closed-form solutions that describe the deformation. Using variational techniques, we also show that the problem exhibits a bifurcation, where the gap spontaneously closes due to an incremental increase in drop volume.

  16. Capillary electrophoresis theory and practice

    CERN Document Server

    Grossman, Paul D


    This book is designed to be a practical guide, used by wide audience, including those new to CE, those more experienced, routine users, those interested in technology development, and those involved with applications research. References have been emphasized to allow the reader to explore the detailed specifics and theoretical foundations.This book draws together the rapidly evolving, diverse, and multidisciplinary subject of capillary electrophoresis (CE). It is designed as a practical guide to be used by a wide audience, including those new to CE as well as more experienced users. T

  17. Electromigration dispersion in Capillary Electrophoresis

    CERN Document Server

    Chen, Zhen; 10.1007/s11538-011-9708-7


    In a previous paper (S. Ghosal and Z. Chen Bull. Math. Biol. 2010, vol. 72, pg. 2047) it was shown that the evolution of the solute concentration in capillary electrophoresis is described by a nonlinear wave equation that reduced to Burger's equation if the nonlinearity was weak. It was assumed that only strong electrolytes (fully dissociated) were present. In the present paper it is shown that the same governing equation also describes the situation where the electrolytic buffer consists of a single weak acid (or base). A simple approximate formula is derived for the dimensionless peak variance which is shown to agree well with published experimental data.

  18. Electrophoretic separation techniques and their hyphenation to mass spectrometry in biological inorganic chemistry. (United States)

    Holtkamp, Hannah; Grabmann, Gerlinde; Hartinger, Christian G


    Electrophoretic methods have been widely applied in research on the roles of metal complexes in biological systems. In particular, CE, often hyphenated to a sensitive MS detector, has provided valuable information on the modes of action of metal-based pharmaceuticals, and more recently new methods have been added to the electrophoretic toolbox. The range of applications continues to expand as a result of enhanced CE-to-MS interfacing, with sensitivity often at picomolar level, and evolved separation modes allowing for innovative sample analysis. This article is a followup to previous reviews about CE methods in metallodrug research (Electrophoresis, 2003, 24, 2023-2037; Electrophoresis, 2007, 28, 3436-3446; Electrophoresis, 2012, 33, 622-634), also providing a comprehensive overview of metal species studied by electrophoretic methods hyphenated to MS. It highlights the latest CE developments, takes a sneak peek into gel electrophoresis, traces biomolecule labeling, and focuses on the importance of early-stage drug development.

  19. Cathodic electrophoretic deposition ofα-Fe2O3 coating

    Institute of Scientific and Technical Information of China (English)

    马莉; 常通; 李小斌; 李志友; 张斗; 周科朝


    Submicroα-Fe2O3 coatings were formed using electrophoretic deposition (EPD) technique in aqueous media. The zeta potentials of differentα-Fe2O3 suspensions with different additives were measured as a function of pH to identify the optimum suspension condition for deposition. Electrophoretic depositions ofα-Fe2O3 coatings under different applied electric fields and deposition time were studied and the effects of applied voltages and deposition time on deposition rates and thicknesses were investigated. The particle packing densities of the deposits at various applied voltages and deposition time were also analyzed by a scanning electron microscope (SEM). The results show that crack-freeα-Fe2O3 coatings with uniform microstructure and good adherence to the nickel substrates are successfully obtained. Electrophoretic depositedα-Fe2O3 coating from aqueous suspension is a feasible, low-cost and environmental friendly method.

  20. Electrophoretic deposition of hyaluronic acid and composite films for biomedical applications (United States)

    Ma, R.; Li, Y.; Zhitomirsky, I.


    Hyaluronic acid (HYH) is a natural biopolymer, which has tremendous potential for various biomedical applications. Electrophoretic deposition (EPD) methods have been developed for the fabrication of HYH films and composites. New methods for the immobilization of drugs and proteins have been utilized for the fabrication of organic composites. Electrophoretic deposition enabled the fabrication of organic-inorganic composites containing bioceramics and bioglass in the HYH matrix. It was shown that the deposition yield, microstructure, and composition of the films can be controlled. Potential applications of EPD for the surface modification of biomedical implants and fabrication of biosensors are highlighted.

  1. Electrophoretic deposition of graphene oxide as a corrosion inhibitor for sintered NdFeB (United States)

    He, Wenting; Zhu, Liqun; Chen, Haining; Nan, Haiyang; Li, Weiping; Liu, Huicong; Wang, Yan


    Graphene oxide (GO) was deposited uniformly on the surface of permanent magnet material NdFeB by electrophoretic deposition (EPD). Electrophoretic deposited graphene oxide (EPD-GO) coating was reduced partially after EPD process, owing to the removal of oxygen functional groups. And EPD-GO coating showed excellent adhesion to the NdFeB matrix. According to the results of electrochemical tests, the decrease in corrosion current density and the positive shift in corrosion potential have both demonstrated that EPD-GO coating served as a corrosion inhibitor, protecting NdFeB from NaCl aqueous solution.

  2. Two-dimensional capillary origami

    Energy Technology Data Exchange (ETDEWEB)

    Brubaker, N.D., E-mail:; Lega, J., E-mail:


    We describe a global approach to the problem of capillary origami that captures all unfolded equilibrium configurations in the two-dimensional setting where the drop is not required to fully wet the flexible plate. We provide bifurcation diagrams showing the level of encapsulation of each equilibrium configuration as a function of the volume of liquid that it contains, as well as plots representing the energy of each equilibrium branch. These diagrams indicate at what volume level the liquid drop ceases to be attached to the endpoints of the plate, which depends on the value of the contact angle. As in the case of pinned contact points, three different parameter regimes are identified, one of which predicts instantaneous encapsulation for small initial volumes of liquid. - Highlights: • Full solution set of the two-dimensional capillary origami problem. • Fluid does not necessarily wet the entire plate. • Global energy approach provides exact differential equations satisfied by minimizers. • Bifurcation diagrams highlight three different regimes. • Conditions for spontaneous encapsulation are identified.

  3. Mixed Fluid Conditions: Capillary Phenomena

    KAUST Repository

    Santamarina, Carlos


    Mixed fluid phenomena in porous media have profound implications on soil-atmosphere interaction, energy geotechnology, environmental engineering and infrastructure design. Surface tension varies with pressure, temperature, solute concentration, and surfactant concentration; on the other hand, the contact angle responds to interfacial tensions, surface topography, invasion velocity, and chemical interactions. Interfaces are not isolated but interact through the fluid pressure and respond to external fields. Jumps, snap-offs and percolating wetting liquids along edges and crevices are ubiquitous in real, non-cylindrical porous networks. Pore- and macroscale instabilities together with pore structure variability-and-correlation favor fluid trapping and hinder recovery efficiency. The saturation-pressure characteristic curve is affected by the saturation-history, flow-rate, the mechanical response of the porous medium, and time-dependent reactive and diffusive processes; in addition, there are salient differences between unsaturation by internal gas nucleation and gas invasion. Capillary forces add to other skeletal forces in the porous medium and can generate open-mode discontinuities when the capillary entry pressure is high relative to the effective stress. Time emerges as an important variable in mixed-fluid conditions and common quasi-static analyses may fail to capture the system response.

  4. Atomic Force Controlled Capillary Electrophoresis (United States)

    Lewis, Aaron; Yeshua, Talia; Palchan, Mila; Lovsky, Yulia; Taha, Hesham


    Lithography based on scanning probe microscopic techniques has considerable potential for accurate & localized deposition of material on the nanometer scale. Controlled deposition of metallic features with high purity and spatial accuracy is of great interest for circuit edit applications in the semiconductor industry, for plasmonics & nanophotonics and for basic research in surface enhanced Raman scattering & nanobiophysics. Within the context of metal deposition we will review the development of fountain pen nanochemistry and its most recent emulation Atomic Force Controlled Capillary Electrophoresis (ACCE). Using this latter development we will demonstrate achievement of unprecedented control of nanoparticle deposition using a three-electrode geometry. Three electrodes are attached: one on the outside of a metal coated glass probe, one on the inside of a hollow probe in a solution containing Au nanoparticles in the capillary, and a third on the surface where the writing takes place. The three electrodes provide electrical pulses for accurate control of deposition and retraction of the liquid from the surface overcoming the lack of control seen in both dip pen lithography & fountain pen nanochemistry when the tip contacts the surface. With this development, we demonstrate depositing a single 1.3 nm Au nanoparticle onto surfaces such as semiconductors.

  5. Capillary electrophoresis for the assay of fixed-dose combination tablets of artesunate and amodiaquine

    Directory of Open Access Journals (Sweden)

    Amin N’Cho


    Full Text Available Abstract Background Quality control of drugs in formulations is still a major challenge in developing countries. For the quality control of artesunate and amodiaquine tablets in fixed-dose combination, only liquid chromatographic methods have been proposed in the literature. There are no capillary electrophoretic methods reported for the determination of these active substances, although this technique presents several advantages over liquid chromatography (long lifetime, low price of the capillary, low volumes of electrolyte consumption in addition to simplicity. In this paper, a reliable capillary electrophoresis method has been developed and validated for the quality control of these drugs in commercial fixed-dose combination tablets. Methods Artesunate and amodiaquine hydrochloride in bilayer tablets were determined by micellar electrokinetic capillary chromatography (MEKC. Analytes were extracted from tablets by sonication with a solvent mixture phosphate buffer pH 7.0-acetonitrile containing benzoic acid as internal standard. Separation was carried out on Beckman capillary electrophoresis system equipped with fused silica capillary, 30 cm long (20 cm to detector × 50 μm internal diameter, using a 25 mM borate buffer pH 9.2 containing 30 mM sodium dodecyl sulfate as background electrolyte, a 500 V cm−1 electric field and a detection wavelength of 214 nm. Results Artesunate, amodiaquine and benzoic acid were separated in 6 min. The method was found to be reliable with respect to specificity,linearity of the calibration line (r2 > 0.995, recovery from synthetic tablets (in the range 98–102%, repeatability (RSD 2–3%, n = 7 analytical procedures. Application to four batches of commercial formulations with different dosages gave content in good agreement with the declared content. Conclusion The MEKC method proposed is reliable for the determination of artesunate and amodiaquine hydrochloride in fixed

  6. Recent advances in the development of capillary electrophoresis methodologies for optimizing, controlling, and characterizing the synthesis, functionalization, and physicochemical, properties of nanoparticles. (United States)

    Trapiella-Alfonso, Laura; d'Orlyé, Fanny; Varenne, Anne


    This paper gives a critical overview of capillary electrophoresis (CE) methodologies recently developed for controlling and optimizing the synthesis of nanoparticles as well as characterizing their functionalization in terms of physicochemical properties. Thanks to their electrophoretic mobility, various parameters can be determined, such as NP size and charge distribution, ζ-potential, surface functionality, colloidal stability, grafting rates, and dissociation constants, allowing not only the complete characterization of new nanoprobes but also helping in their design and in the selection of chemical conditions for their storage and further manipulation. New strategies for the improvement of CE detection sensitivity are also described.

  7. Simultaneous determination of ammonia, dimethylamine, trimethylamine and trimethylamine-N-oxide in fish extracts by capillary electrophoresis with indirect UV-detection

    DEFF Research Database (Denmark)

    Timm Heinrich, Maike; Jørgensen, Bo


    A capillary electrophoretic method with indirect UV detection is described for simultaneous determination of ammonia, dimethylamine (DMA), trimethylamine (TMA) and trimethylamine-N- oxide (TMAO) in aqueous extracts of fish, A buffer consisting of 4 mM formic acid, 5 mM copper(II)sulfate and 3 m......M. The detection limit for ammonia, DMA, TMA, and TMAO was less than 0.04 mM, corresponding to 2 mg nitrogen per 100 g fish. As an extra benefit, the method also provided a quantitative determination of potassium, sodium, calcium and magnesium ions. (C) 2002 Elsevier Science Ltd. All rights reserved....

  8. Modeling capillary forces for large displacements

    NARCIS (Netherlands)

    Mastrangeli, M.; Arutinov, G.; Smits, E.C.P.; Lambert, P.


    Originally applied to the accurate, passive positioning of submillimetric devices, recent works proved capillary self-alignment as effective also for larger components and relatively large initial offsets. In this paper, we describe an analytic quasi-static model of 1D capillary restoring forces tha

  9. Capillary waveguide optrodes for Medical applications (United States)

    Kieslinger, Dietmar; Weigl, Bernhard H.; Draxler, Sonja; Lippitsch, Max E.


    Glass capillaries with a chemically sensitive coating on the inner surface are used as optical sensors for medical diagnostics. The capillary simultaneously serves as a sample compartment, a sensor element, and an inhomogeneous optical waveguide. Different optical setups have been investigated and compared regarding its waveguiding properties.

  10. Arrested segregative phase separation in capillary tubes

    NARCIS (Netherlands)

    Tromp, R. Hans; Lindhoud, Saskia


    Phase separation in a capillary tube with one of the phases fully wetting the capillary wall is arrested when the typical size of the phase domains reaches the value of the diameter of the tube. The arrested state consists of an alternating sequence of concave-capped and convex-capped cylindrical

  11. Capillary Electrophoresis of Substituted Benzoic Acids (United States)

    Mills, Nancy S.; Spence, John D.; Bushey, Michelle M.


    A series of substituted benzoic acids (SBAs) are prepared by students. The pKa shift, a result of the electron-withdrawing or electron-donating characteristics of the subsistent is examined in reference to the electrophoretic migration behavior of benzoic acid.

  12. Sheathless interface for coupling capillary electrophoresis with mass spectrometry (United States)

    Wang, Chenchen; Tang, Keqi; Smith, Richard D.


    A sheathless interface for coupling capillary electrophoresis (CE) with mass spectrometry is disclosed. The sheathless interface includes a separation capillary for performing CE separation and an emitter capillary for electrospray ionization. A portion of the emitter capillary is porous or, alternatively, is coated to form an electrically conductive surface. A section of the emitter capillary is disposed within the separation capillary, forming a joint. A metal tube, containing a conductive liquid, encloses the joint.

  13. Capillary electrophoresis using core-based hyperbranched polyethyleneimine (CHPEI) static-coated capillaries. (United States)

    Boonyakong, Cheerapa; Tucker, Sheryl A


    With unique 3-D architecture, the application of core-based hyperbranched polyethyleneimine (CHPEI), as a capillary coating in capillary electrophoresis, is demonstrated by manipulation of the electroosmotic mobility (EOF). CHPEI coatings (CHPEI5, M(w) approximately 5000 and CHPEI25, M(w) approximately 25,000) were physically adsorbed onto the inner surface of bare fused-silica capillary (BFS) via electrostatic interaction of the oppositely charged molecules by rinsing the capillaries with different CHPEI aqueous solutions. The EOF values of the coated capillaries were measured over the pH range of 4.0-9.0. At higher pH (pH >6) the coated capillary surface possesses excess negative charges, which causes the reversal of the EOF. The magnitudes of the EOF obtained from the coated capillaries were three-fold lower than that of BFS capillary. Desirable reproducibility of the EOF with % RSD (n = 5) capillaries were successfully utilized to separate phenolic compounds, B vitamins, as well as basic drugs and related compounds with reasonable analysis time (capillary and capillary).

  14. 'Soft-particle' analysis of the electrophoretic mobility of a fibrillated and non-fibrillated oral streptococcal strain : Streptococcus salivarius

    NARCIS (Netherlands)

    van der Mei, HC; Busscher, HJ; Bos, R.R.M.


    The electrophoretic mobility of microbial cell surfaces can be analysed in terms of a so-called soft layer model, in which the electrophoretic mobility is described as originating from the potentials over the surface charge layer and the membrane fixed charges. Often, the polyelectrolyte layer

  15. Integrated hybrid polystyrene-polydimethylsiloxane device for monitoring cellular release with microchip electrophoresis and electrochemical detection (United States)

    Johnson, Alicia S.; Mehl, Benjamin T.; Martin, R. Scott


    In this work, a polystyrene (PS)-polydimethylsiloxane (PDMS) hybrid device was developed to enable the integration of cell culture with analysis by microchip electrophoresis and electrochemical detection. It is shown that this approach combines the fundamental advantages of PDMS devices (the ability to integrate pumps and valves) and PS devices (the ability to permanently embed fluidic tubing and electrodes). The embedded fused-silica capillary enables high temporal resolution measurements from off-chip cell culture dishes and the embedded electrodes provide close to real-time analysis of small molecule neurotransmitters. A novel surface treatment for improved (reversible) adhesion between PS and PDMS is described using a chlorotrimethylsilane stamping method. It is demonstrated that a Pd decoupler is efficient at handling the high current (and cathodic hydrogen production) resulting from use of high ionic strength buffers needed for cellular analysis; thus allowing an electrophoretic separation and in-channel detection. The separation of norepinephrine (NE) and dopamine (DA) in highly conductive biological buffers was optimized using a mixed surfactant system. This PS-PDMS hybrid device integrates multiple processes including continuous sampling from a cell culture dish, on-chip pump and valving technologies, microchip electrophoresis, and electrochemical detection to monitor neurotransmitter release from PC 12 cells. PMID:25663849

  16. Modulation in capillary electrophoresis and analysis of DNA

    Energy Technology Data Exchange (ETDEWEB)

    Demana, T.


    Analyte velocity modulation results when a sinusoidal AC voltage is superimposed onto the driving DC voltage. The principal motivation for the work has been exploration of voltage modulation as a technique is especially effective with excess noise limited detectors such as the refractive index detector. One advantage of an electrical modulation technique, over an optical one, is its applicability to all detection schemes. The mathematical theory of analyte velocity modulation is presented in this work. The main idea is that the superimposed AC field forces the electroosmotic flow profile to oscillate between laminar and plug flow at the modulation frequency. The changing profile induces a radial movement of sample species to and from the capillary surface. The induced sample concentration gradients can be monitored by carefully probing the capillary surface. The resulting signal is a derivative of the normal shaped peak. Derivative shaped peaks can be observed with cations, but not with anions. Anions are unable to approach the double layer region and therefore are unaffected by the modulation process. The results indicate that the double layer thickness in free solution capillary electrophoresis might be larger than the nominally calculated 3 nm. Analyte velocity modulation can be used as a variation of pulsed field electrophoresis in gel-filled capillaries. This technique provides superior resolution of DNA fragments and shortens their migration times. The authors demonstrate subpicogram detection limits for nucleic acids, with very high efficiencies. Theoretical plate numbers are in the range of 10[sup 5] to 10[sup 6]. They also demonstrate that sine wave modulation gives resolution similar to square wave modulation for frequencies between 10 and 100 Hz. Although a square wave contains high frequency harmonics, the authors show that in general its coupling to DNA motions is not always inferior to that of a sine wave.

  17. Periocular capillary hemangioma: management practices in recent years

    Directory of Open Access Journals (Sweden)

    Hernandez JA


    Full Text Available Jo Anne Hernandez,1,3,4 Audrey Chia,2 Boon Long Quah,1,2 Lay Leng Seah1,2 1Department of Ophthalmology, Kandang Kerbau Women's and Children's Hospital, Singapore; 2Singapore National Eye Centre, Singapore; 3National Healthcare Group Eye Institute, Tan Tock Seng Hospital, Singapore; 4Department of Ophthalmology, Cardinal Santos Medical Center, San Juan, Manila, Philippines Purpose: To present a case series on the management options for capillary hemangiomas involving the eyelid and orbit. Methods: This is a retrospective chart review of clinically diagnosed capillary hemangioma cases involving the periocular region treated at two local eye institutions. The patients' demographics and clinical presentation – including visual acuity, refractive error, periorbital and orbital examinations, and ultrasound and magnetic resonance imaging findings – were reviewed. The clinical progression, modalities of treatment, and treatment outcomes were studied. Results: Sixteen cases of capillary hemangiomas involving the eyelid and orbit were studied. The mean age at consultation was 9.6 months (range: 1 month–72 months. The majority were females (75%, with 50% presenting as upper-eyelid hemangiomas and the remaining as lower-eyelid (38% and glabellar (12% lesions. Combined superficial and deep involvement was common (64%. Cases whose lesions were located at the upper eyelid or superior orbit led to amblyopia (25%. Fifty-six percent of cases (9/16 were managed conservatively, and 44% (7/16 underwent treatment with either single-agent (n = 4 or combined treatments (n = 3. Conclusion: Close monitoring of visual development and prompt institution of amblyopia therapy for children with periocular capillary hemangiomas generally preserve vision. Extensive lesions that affect the visual axis require local and systemic treatments, alone or in combination, in order to reduce the size and impact of lesions on the eyeball, to reduce induced refractive error and

  18. Capillary electrophoresis separation of neutral organic compounds, pharmaceutical drugs, proteins and peptides, enantiomers, and anions

    Energy Technology Data Exchange (ETDEWEB)

    Ding, Wei -Liang [Iowa State Univ., Ames, IA (United States)


    Addition of a novel anionic surfactant, namely lauryl polyoxyethylene sulfate, to an aqueous-acetonitrile electrolyte makes it possible to separate nonionic organic compounds by capillary electrophoresis. Separation is based on differences in the association between analytes and the surfactant. Highly hydrophobic compounds such as polyaromatic hydrocarbons are well separated by this new surfactant. Migration times of analytes can be readily changed over an unusually large range by varying the additive concentration and the proportion of acetonitrile in the electrolyte. Several examples are given, including the separation of four methylbenz[a]anthracene isomers and the separation of normal and deuterated acetophenone. The effect of adding this new surfactant to the acidic electrolyte was also investigated. Incorporation of cetyltrimethylammonium bromide in the electrolyte is shown to dynamically coat the capillary and reverse electroosmotic flow. Chiral recognition mechanism is studied using novel synthetic surfactants as chiral selectors, which are made from amino acids reacting with alkyl chloroformates. A satisfactory separation of both inorganic and organic anions is obtained using electrolyte solutions as high as 5 M sodium chloride using direct photometric detection. The effect of various salts on electrophoretic and electroosmotic mobility is further discussed. Several examples are given under high-salt conditions.

  19. Quantitative analysis of synthetic dyes in lipstick by micellar electrokinetic capillary chromatography. (United States)

    Desiderio, C; Marra, C; Fanali, S


    The separation of synthetic dyes, used as color additives in cosmetics, by micellar electrokinetic capillary chromatography (MEKC) is described in this study. The separation of seven dyes, namely eosine, erythrosine, cyanosine, rhodamine B, orange II, chromotrope FB and tartrazine has been achieved in about 3 min in an untreated fused silica capillary containing as background electrolyte a 25 mM tetraborate/phosphate buffer, pH 8.0, and 30 mM sodium dodecyl sulfate. The electrophoretic method exhibits precision and relatively high sensitivity. A detection limit (LOD, signal/noise = 3) in the range of 5-7.5 X 10(-7) M of standard compounds was recorded. Intra-day repeatability of all the studied dye determinations (8 runs) gave the following results (limit values), % standard deviation: 0.24-1.54% for migration time, 0.99-1.24% for corrected peak areas, 0.99-1.24% for corrected peak area ratio (analyte/internal standard) and 1.56-2.74% for peak areas. The optimized method was successfully applied to the analysis of a lipstick sample where eosine and cyanosine were present.

  20. [Improvement of carbohydrate deficient transferrin measurement by capillary zone electrophoresis using immunosubtraction of immunoglobulins and transferrin]. (United States)

    Baraud, J; Schellenberg, F; Pagès, J-C


    CDT (Carbohydrate Deficient Transferrin) is considered as the most efficient biomarker of alcohol abuse available for routine use. Among the various methods developed for its measurement, capillary zone electrophoresis (CZE) on the multicapillary analyzer Capillarys2 provides high quality results at high throughput. However, the non CDT specific measurement of protein absorbance at 200 nm may bring abnormal profiles in samples from patients with high polyclonal immunoglobulin level or monoclonal component. We evaluated the automated immunosubtraction procedure developed by the manufacturer in 48 samples with abnormal electrophoretic profiles that potentially could interfere with CZE measurement of CDT. Elimination of the serum immunoglobulins raised the number of interpretable profiles from 19 (40%) to 37 (77%). The immunosubtraction procedure failed in samples with a monoclonal component present at a concentration > 60 g/L and in some samples harbouring a partially degraded C3 fraction. Six samples identified as genetic BC transferrin variants were also included in the study and submitted to an automated transferrin subtraction procedure to ascertain whether the additional peak were actually transferrin glycoforms. After treatment, two samples were classified as homozygote C for transferrin due to the persistence of one of the supposed transferrin peak. In conclusion, immunoglobulin and transferrin subtraction allow a better CDT measurement in most samples with interfering monoclonal components and avoid misclassification of suspected transferrin BC or CD variants.

  1. Determination of quinolones in plasma samples by capillary electrophoresis using solid-phase extraction. (United States)

    Hernández, M; Borrull, F; Calull, M


    The potential of capillary zone electrophoresis (CZE) and micellar electrokinetic capillary chromatography (MEKC) have been investigated for the separation and quantitative determination of 10 quinolone antibiotics. The influence of different conditions, such as the buffer and pH of the electrolyte, the surfactant and the ion-pairing agents added to the electrolyte and the organic modifier were studied. A buffer consisting of 40 mM sodium tetraborate at pH 8.1 containing 10% (v/v) methanol was found to be a highly efficient electrophoretic system for separating lomefloxacin, enoxacin, norfloxacin, pipemidic acid, ofloxacin, piromidic acid, flumequine, oxolinic acid, cinoxacin and nalidixic acid. A solid-phase extraction method to remove the sample matrix (pig plasma samples) was developed on a C(18) cartridge using a mixture of methanol-water (70:30, v/v). The method is specific and reproducible and mean recoveries were in the range 94.0+/-4.2% and 123.3+/-4.1% for pig plasma samples over the range used. A linear relationship between concentration and peak area for each compound in pig plasma samples was obtained in the concentration range 5-20 mg l(-1) and detection limits were between 1.1 and 2.4 mg l(-1).

  2. Non-aqueous capillary electrophoresis of drugs: properties and application of selected solvents. (United States)

    Tjørnelund, J; Hansen, S H


    The electrophoretic mobility of selected acidic and basic test solutes have been determined in non-aqueous media prepared by adding various combinations of ammonium acetate, sodium acetate, methane sulphonic acid and acetic acid to acetonitrile, propylene carbonate, methanol, formamide, N-methylformamide, N,N-dimethylformamide and dimethylsulphoxide, respectively. The apparent pH (pH*) of these non-aqueous media have been measured and it was found that pH* is an important factor for the separations in non-aqueous capillary electrophoresis. However, in some solvents the concentration of sodium acetate has a strong influence on the mobility despite very small changes in pH*. Due to the fact that a change in one parameter influences a number of other parameters it is very difficult to conduct systematic studies in non-aqueous media and to compare the migration of the species at fixed pH* values from one solvent to another. Thus pH* is only of value for comparison when used with a specific solvent or solvent mixture. The viscosity of the above-mentioned solvents were measured at various temperatures and means to adjust the viscosity of the non-aqueous media used for capillary electrophoresis are discussed and the separation of ibuprofen and its major metabolites in urine is used as an example.

  3. Sialic acid accelerates the electrophoretic velocity of injured dorsal root ganglion neurons

    Directory of Open Access Journals (Sweden)

    Chen-xu Li


    Full Text Available Peripheral nerve injury has been shown to result in ectopic spontaneous discharges on soma and injured sites of sensory neurons, thereby inducing neuropathic pain. With the increase of membrane proteins on soma and injured site neurons, the negatively charged sialic acids bind to the external domains of membrane proteins, resulting in an increase of this charge. We therefore speculate that the electrophoretic velocity of injured neurons may be faster than non-injured neurons. The present study established rat models of neuropathic pain via chronic constriction injury. Results of the cell electrophoresis test revealed that the electrophoretic velocity of injured neuronal cells was faster than that of non-injured (control cells. We then treated cells with divalent cations of Ca 2+ and organic compounds with positive charges, polylysine to counteract the negatively charged sialic acids, or neuraminidase to specifically remove sialic acids from the membrane surface of injured neurons. All three treatments significantly reduced the electrophoretic velocity of injured neuronal cells. These findings suggest that enhanced sialic acids on injured neurons may accelerate the electrophoretic velocity of injured neurons.

  4. Comparison of chemical, electrophoretic and in vitro digestion methods for predicting fish meal nutritive quality

    DEFF Research Database (Denmark)

    Bassompierre, M.; Larsen, K.L.; Zimmermann, W.


    Chemical, electrophoretic and in vitro digestion methods were compared with respect to predictions given regarding fish meal (FM) quality. FMs were manufactured by mixing a press-cake, with spray dried stickwater concentrate from the identical raw material, thereby providing samples containing...

  5. Electrophoretic mobilities of protein-coated hexadecane droplets at different pH

    NARCIS (Netherlands)

    van der Mei, HC; Meijer, S; Busscher, HJ


    Electrophoretic mobilities of hexadecane droplets in 10 mM potassium phosphate solutions (pH between 3.0 and 7.0) and in phosphate buffered saline (pH 7.0) were measured during adsorption of bovine (BSA) and human (HSA) serum albumin, immunoglobulin G (IgG), and fibrinogen (Fg) from single-protein

  6. Electrophoretic karyotype polymorphism of sibling species of the Paramecium aurelia complex. (United States)

    Nekrasova, Irina V; Przyboś, Ewa; Rautian, Maria S; Potekhin, Alexey A


    Variability of karyotypes is one of the main mechanisms of speciation in organisms. Electrophoretic karyotypes of the macronucleus (MAC) obtained by pulsed-field gel electrophoresis were compared for 86 strains of all 15 sibling species of the Paramecium aurelia complex in order to determine if karyotype differences corresponded to biological species boundaries. Because the electrophoretic karyotype of the MAC reflects indirectly the frequency and distribution of fragmentation sites in the micronuclear (MIC) chromosomes, any change in MAC electrophoretic karyotype may be a marker of certain chromosomal mutations in the MIC. Thirteen main variants of electrophoretic MAC karyotypes were observed in this species complex. Ten of them appeared to correspond to biological species, while the three other variants characterized several species each. Intraspecific polymorphism was observed for several species: in some cases a certain variant of MAC karyotype was specific for all strains from the same part of the world. Distribution of the MAC karyotype variants along molecular phylogenetic trees of the P. aurelia complex shows that isolation of each species or group of species of this complex was accompanied by divergence in the molecular organization of the genome. © 2010 The Author(s). Journal of Eukaryotic Microbiology © 2010 International Society of Protistologists.

  7. Fenton fragmentation for faster electrophoretic on chip purification of amplifiable genomic DNA. (United States)

    Hakenberg, S; Hügle, M; Meyer, P; Behrmann, O; Dame, G; Urban, G A


    With a rapid and simple actuation protocol electrophoretic nucleic acid extraction is easy automatable, requires no moving parts, is easy to miniaturize and furthermore possesses a size dependent cut-off filter adjustable by the pore size of the hydrogel. However electrophoretic nucleic acid extraction from bacteria has so far been applied mainly for short RNA targets. One of the reasons is that electrophoretic processing of unfragmented genomic DNA strands is time-consuming, because of the length. Here DNA fragmentation would accelerate extraction and isolation. We introduce on-chip lysis and non-enzymatic DNA cleavage directly followed by a purifying step for receiving amplifiable DNA fragments from bacteria in less than 25 min. In contrast to restriction enzymes the Fenton reaction is known to cleave DNA without nucleotide specificity. The reaction mix contains iron(II) EDTA, sodium ascorbate, hydrogen peroxide and lysozyme. The degree of fragmentation can be adjusted by the concentration of reagents. The results enable electrophoretic extraction methods to unspecifically process long genomic DNA in a short time frame, e.g. for pathogen detection in a lab-on-a-chip format. Copyright © 2014 Elsevier B.V. All rights reserved.

  8. Electrophoretic Mobility Shift Assay of DNA and CRISPR-Cas Ribonucleoprotein Complexes

    NARCIS (Netherlands)

    Künne, T.A.; Westra, E.R.; Brouns, S.J.J.


    The Electrophoretic Mobility Shift Assay is a straightforward and inexpensive method for the determination and quantification of protein-nucleic acid interactions. It relies on the different mobility of free and protein-bound nucleic acid in a gel matrix during electrophoresis. Nucleic acid affiniti

  9. Sialic acid accelerates the electrophoretic velocity of injured dorsal root ganglion neurons

    Institute of Scientific and Technical Information of China (English)

    Chen-xu Li; Guo-ying Ma; Min-fang Guo; Ying Liu


    Peripheral nerve injury has been shown to result in ectopic spontaneous discharges on soma and injured sites of sensory neurons, thereby inducing neuropathic pain. With the increase of membrane proteins on soma and injured site neurons, the negatively charged sialic acids bind to the external domains of membrane proteins, resulting in an increase of this charge. We therefore speculate that the electrophoretic velocity of injured neurons may be faster than non-injured neurons. The present study established rat models of neuropathic pain via chronic constriction injury. Results of the cell electrophoresis test revealed that the electrophoretic velocity of injured neuronal cells was faster than that of non-injured (control) cells. We then treated cells with di-valent cations of Ca2+and organic compounds with positive charges, polylysine to counteract the negatively charged sialic acids, or neuraminidase to speciifcally remove sialic acids from the membrane surface of injured neurons. All three treatments significantly reduced the electro-phoretic velocity of injured neuronal cells. These ifndings suggest that enhanced sialic acids on injured neurons may accelerate the electrophoretic velocity of injured neurons.

  10. Controlled electrophoretic deposition of bacteria to surfaces for the design of biofilms

    NARCIS (Netherlands)

    Poortinga, AT; Busscher, HJ; Bos, R.R.M.


    In this report, the formation of ordered clusters of both spherical and rod-shaped bacteria on an electrode during electrophoretic deposition is described, inside clusters, adhering bacteria are regularly spaced with an interbacterial distance that can be controlled by adjusting the ionic strength o

  11. The electrophoretic banding pattern of the chromosomes of Pichia stipitis and Candida shehatae. (United States)

    Passoth, V; Hansen, M; Klinner, U; Emeis, C C


    The electrophoretic karyotype of fu1ur strains of P. stipitis and five strains of C. shehatae were compared by means of OFAGE and TAFE techniques. Although the number of chromosomal bands was six in all cases except one, P. stipitis revealed a clearly distinct pattern in comparison to C. shehatae. Both yeasts showed remarkable chromosome length polymorphism.

  12. Symmetry Control of Polymer Colloidal Monolayers and Crystals by Electrophoretic Deposition on Patterned Surfaces

    NARCIS (Netherlands)

    Dziomkina, Nina V.; Hempenius, Mark A.; Vancso, G. Julius


    Colloidal crystals with body-centered cubic packing (see Figure) can be fabricated by electrophoretic deposition of charged latex particles onto patterned surfaces. Laser-interference lithography produces SiO2 layers patterned with controlled symmetry that can then be used to control the orientation

  13. Electrophoretic mobility shift assays for the analysis of DNA-protein interactions. (United States)

    Gaudreault, Manon; Gingras, Marie-Eve; Lessard, Maryse; Leclerc, Steeve; Guérin, Sylvain L


    Electromobility shift assay is a simple, efficient, and rapid method for the study of specific DNA-protein interactions. It relies on the reduction in the electrophoretic mobility conferred to a DNA fragment by an interacting protein. The technique is suitable to qualitative, quantitative, and kinetic analyses. It can also be used to analyze conformational changes.

  14. Optical sensing in microchip capillary electrophoresis by femtosecond laser written waveguides

    NARCIS (Netherlands)

    Martinez-Vázquez, R.; Osellame, R.; Cretich, M.; Dongre, C.; Hoekstra, H.J.W.M.; Vlekkert, van den H.; Ramponi, R.; Pollnau, M.; Chiari, M.; Cerullo, G.


    Capillary electrophoresis separation in an on-chip integrated microfluidic channel is typically monitored with bulky, bench-top optical excitation/detection instrumentation. Optical waveguides allow confinement and transport of light in the chip directing it to a small volume of the microfluidic cha

  15. Capillary Separation: Micellar Electrokinetic Chromatography (United States)

    Terabe, Shigeru


    Micellar electrokinetic chromatography (MEKC), a separation mode of capillary electrophoresis (CE), has enabled the separation of electrically neutral analytes. MEKC can be performed by adding an ionic micelle to the running solution of CE without modifying the instrument. Its separation principle is based on the differential migration of the ionic micelles and the bulk running buffer under electrophoresis conditions and on the interaction between the analyte and the micelle. Hence, MEKC's separation principle is similar to that of chromatography. MEKC is a useful technique particularly for the separation of small molecules, both neutral and charged, and yields high-efficiency separation in a short time with minimum amounts of sample and reagents. To improve the concentration sensitivity of detection, several on-line sample preconcentration techniques such as sweeping have been developed.

  16. Capillary Discharge XUV Radiation Source

    Directory of Open Access Journals (Sweden)

    M. Nevrkla


    Full Text Available A device producing Z-pinching plasma as a source of XUV radiation is described. Here a ceramic capacitor bank pulse-charged up to 100 kV is discharged through a pre-ionized gas-filled ceramic tube 3.2 mm in diameter and 21 cm in length. The discharge current has amplitude of 20 kA and a rise-time of 65 ns. The apparatus will serve as experimental device for studying of capillary discharge plasma, for testing X-ray optics elements and for investigating the interaction of water-window radiation with biological samples. After optimization it will be able to produce 46.9 nm laser radiation with collision pumped Ne-like argon ions active medium. 

  17. Two-dimensional capillary origami (United States)

    Brubaker, N. D.; Lega, J.


    We describe a global approach to the problem of capillary origami that captures all unfolded equilibrium configurations in the two-dimensional setting where the drop is not required to fully wet the flexible plate. We provide bifurcation diagrams showing the level of encapsulation of each equilibrium configuration as a function of the volume of liquid that it contains, as well as plots representing the energy of each equilibrium branch. These diagrams indicate at what volume level the liquid drop ceases to be attached to the endpoints of the plate, which depends on the value of the contact angle. As in the case of pinned contact points, three different parameter regimes are identified, one of which predicts instantaneous encapsulation for small initial volumes of liquid.

  18. Gravity Capillary Standing Water Waves (United States)

    Alazard, Thomas; Baldi, Pietro


    The paper deals with the 2D gravity-capillary water waves equations in their Hamiltonian formulation, addressing the question of the nonlinear interaction of a plane wave with its reflection off a vertical wall. The main result is the construction of small amplitude, standing (namely periodic in time and space, and not travelling) solutions of Sobolev regularity, for almost all values of the surface tension coefficient, and for a large set of time-frequencies. This is an existence result for a quasi-linear, Hamiltonian, reversible system of two autonomous pseudo-PDEs with small divisors. The proof is a combination of different techniques, such as a Nash-Moser scheme, microlocal analysis and bifurcation analysis.

  19. Copolymers For Capillary Gel Electrophoresis (United States)

    Liu, Changsheng; Li, Qingbo


    This invention relates to an electrophoresis separation medium having a gel matrix of at least one random, linear copolymer comprising a primary comonomer and at least one secondary comonomer, wherein the comonomers are randomly distributed along the copolymer chain. The primary comonomer is an acrylamide or an acrylamide derivative that provides the primary physical, chemical, and sieving properties of the gel matrix. The at least one secondary comonomer imparts an inherent physical, chemical, or sieving property to the copolymer chain. The primary and secondary comonomers are present in a ratio sufficient to induce desired properties that optimize electrophoresis performance. The invention also relates to a method of separating a mixture of biological molecules using this gel matrix, a method of preparing the novel electrophoresis separation medium, and a capillary tube filled with the electrophoresis separation medium.

  20. Detection of moving capillary front in porous rocks using X-ray and ultrasonic methods

    Directory of Open Access Journals (Sweden)

    Christian eDavid


    Full Text Available Several methods are compared for the detection of moving capillary fronts in spontaneous imbibition experiments where water invades dry porous rocks. These methods are: (i the continuous monitoring of the mass increase during imbibition, (ii the imaging of the water front motion using X-ray CT scanning, (iii the use of ultrasonic measurements allowing the detection of velocity, amplitude and spectral content of the propagating elastic waves, and (iv the combined use of X-ray CT scanning and ultrasonic monitoring. It is shown that the properties of capillary fronts depend on the heterogeneity of the rocks, and that the information derived from each method on the dynamics of capillary motion can be significantly different. One important result from the direct comparison of the moving capillary front position and the P wave attributes is that the wave amplitude is strongly impacted before the capillary front reaches the sensors, in contrast with the velocity change which is concomitant with the fluid front arrival in the sensors plane.

  1. Electrophoretic particle guidance significantly enhances olfactory drug delivery: a feasibility study.

    Directory of Open Access Journals (Sweden)

    Jinxiang Xi

    Full Text Available BACKGROUND: Intranasal olfactory drug delivery provides a non-invasive method that bypasses the Blood-Brain-Barrier and directly delivers medication to the brain and spinal cord. However, a device designed specifically for olfactory delivery has not yet been found. METHODS: In this study, a new delivery method was proposed that utilized electrophoretic forces to guide drug particles to the olfactory region. The feasibility of this method was numerically evaluated in both idealized 2-D and anatomically accurate 3-D nose models. The influence of nasal airflow, electrode strength, and drug release position were also studied on the olfactory delivery efficiency. FINDINGS: Results showed that by applying electrophoretic forces, the dosage to the olfactory region was significantly enhanced. In both 2-D and 3-D cases, electrophoretic-guided delivery achieved olfactory dosages nearly two orders of magnitude higher than that without electrophoretic forces. Furthermore, releasing drugs into the upper half of the nostril (i.e., partial release led to olfactory dosages two times higher than releasing drugs over the entire area of the nostril. By combining the advantages of pointed drug release and appropriate electrophoretic guidance, olfactory dosages of more than 90% were observed as compared to the extremely low olfactory dosage (<1% with conventional inhaler devices. CONCLUSION: Results of this study have important implications in developing personalized olfactory delivery protocols for the treatment of neurological disorders. Moreover, a high sensitivity of olfactory dosage was observed in relation to different pointed release positions, indicating the importance of precise particle guidance for effective olfactory delivery.

  2. Capillary zone electrophoresis for determination of vildagliptin (a DPP-4 inhibitor) in pharmaceutical formulation and comparative study with HPLC. (United States)

    Barden, A T; Piccoli, B L; Volpato, N M; Schapoval, E E S; Steppe, M


    A stability-indicating capillary zone electrophoresis (CZE) method was validated for the determination of vildagliptin (VLG) in pharmaceutical dosage forms using ranitidine hydrochloride (RH) as internal standard. The CZE method was carried out in a fused silica capillary (64.5 cm total length and 56.0 cm effective length, 50 microm i.d.) by applying a potential of 25 kV (positive polarity), hydrodynamic injection by 50 mbar for 5 s and the temperature of the capillary cartridge was 25 degreesC. The selected background electrolyte (BGE) consisted of 25 mM potassium phosphate (pH 8.0) with UV/PDA detection at 207 nm. The electrophoretic separation was obtained within 6 min and was linear in the range of 50-200 microg/mL (r= 0.9994). The specificity and the stability-indicating capability were demonstrated through degradation studies, which also showed that there was no interference of the formulation excipients. The method was validated in accordance to ICH guidelines acceptance criteria for specificity, linearity, precision, accuracy, robustness and system suitability. The proposed method was compared with HPLC method previously validated for this drug, and statistical analysis showed no significant difference between the methods.

  3. Prototyping of poly(dimethylsiloxane) interfaces for flow gating, reagent mixing, and tubing connection in capillary electrophoresis. (United States)

    Zhang, Qiyang; Gong, Maojun


    Integrated microfluidic systems coupled with electrophoretic separations have broad application in biologic and chemical analysis. Interfaces for the connection of various functional parts play a major role in the performance of a system. Here, we developed a rapid prototyping method to fabricate monolithic poly(dimethylsiloxane) (PDMS) interfaces for flow-gated injection, online reagent mixing, and tube-to-tube connection in an integrated capillary electrophoresis (CE) system. The basic idea was based on the properties of PDMS: elasticity, transparency, and suitability for prototyping. The molds for these interfaces were prepared by using commercially available stainless steel wires and nylon lines or silica capillaries. A steel wire was inserted through the diameter of a nylon line and a cross format was obtained as the mold for PDMS casting of flow gates and 4-way mixers. These interfaces accommodated tubing connection through PDMS elasticity and provided easy visual trouble shooting. The flow gate used smaller channel diameters, thus reducing flow rate by 25-fold for effective gating compared with mechanically machined counterparts. Both PDMS mixers and the tube-to-tube connectors could minimize the sample dead volume by using an appropriate capillary configuration. As a whole, the prototyped PDMS interfaces are reusable, inexpensive, convenient for connection, and robust when integrated with the CE detection system. Therefore, these interfaces could see potential applications in CE and CE-coupled systems. Copyright © 2013 Elsevier B.V. All rights reserved.

  4. 用于高效液相色谱和开管毛细管电色谱的氢化硅胶分离材料%Hydride-Based Separation Materials for High Performance Liquid Chromatography and Open Tubular Capillary Electrochromatography

    Institute of Scientific and Technical Information of China (English)

    PESEK Joseph J; MATYSKA Maria T


    Silica hydride is a recent development in chromatographic support materials for high performance liquid chromatography (HPLC) where hydride groups replace 95% of the silanols on the surface. This conversion changes many of the fundamental properties of the material as well as the bonded stationary phases that are the result of further chemical modification of the hydride surface. Some unique chromatographic properties of hydride-based phases are described as well as some general application areas where these bonded materials may be used in preference to or have advantages not available from typical stationary phases. The fabrication, properties and applications of etched chemically modified capillaries for electrophoretic analysis are also reviewed. It is shown that the etching process creates a surface that is fundamentally different than a bare fused silica capillary. The new surface matrix produces unique electroosmotic flow properties and is more compatible with basic and biological compounds. After chemical modification of the surface, the bonded organic moiety (stationary phase) contributes to the control of migration of solutes in the capillary. Both electrophoretic and chromatographic processes take place in the etched chemically modified capillaries leading to a variety of experimental variables that can be used to optimize separations. A number of examples of separations on these capillaries are described.

  5. [Determination of capillary plasma C-reactive protein during therapy for acute infectious lung diseases]. (United States)

    Makarenko, V V; Vavilikhina, N F; Kastrikina, T N; El'chaninova, S A


    Changes in the concentration of C-reactive protein (CRP), leukocytes, erythrocyte sedimentation rate, and differential blood count were comparatively estimated in the treatment of 66 infants (aged 1.12 +/- 0.95 years) with acute infectious lung diseases. There was a high correlation between capillary plasma and venous serum CRP concentrations. On the first day of effective antibiotic therapy, there was a significant decrease in CRP levels; the sensitivity and specificity were 96 and 94%, respectively. Thus, measurement of capillary blood CRP is an accessible and informative tool to monitor therapy for infectious lung diseases in infants.

  6. Nanoparticle-based capillary electroseparation of proteins in polymer capillaries under physiological conditions

    DEFF Research Database (Denmark)

    Nilsson, C.; Harwigsson, I.; Becker, K.


    Totally porous lipid-based liquid crystalline nanoparticles were used as pseudostationary phase for capillary electroseparation with LIF detection of proteins at physiological conditions using unmodified cyclic olefin copolymer capillaries (Topas (R), 6.7 cm effective length). In the absence...... at protein friendly conditions. The developed capillary-based method facilitates future electrochromatography of proteins on polymer-based microchips under physiological conditions and enables the initial optimization of separation conditions in parallel to the chip development....

  7. Amperometric detection in the presence of carbon nanotubes dispersed in background electrolyte: Evaluating its suitability for capillary electrokinetic chromatography separations of polyphenolic compounds. (United States)

    Moreno, Mónica; Sánchez Arribas, Alberto; Bermejo, Esperanza; Zapardiel, Antonio; Chicharro, Manuel


    This work reports on the positive effects observed upon both the separation and analytical signals in electrophoretic separations of selected phenolic compounds when using aqueous BGE containing carbon nanotubes (CNTs) in connection to electrochemical detection (ECD). The influence of the presence of surfactant-coated CNTs in the BGE upon the amperometric response of probe compounds was evaluated under hydrodynamic regime in capillary flow injection experiments as well as electrophoretic separations. Among the surfactants employed to disperse CNTs within BGE, SDS shows the best results in terms of dispersion stability and degree of dispersion of the CNTs. ECD allows working with BGEs containing CNTs concentrations of, at least, 24.0 mg/L without increasing of baseline noise, on the opposite to that reported when using UV-visible detection, and the presence of CNTs in the BGE improves the electrochemical response of some of the tested compounds. These benefits were reflected in higher sensibility in the electrochemical signal and additional improved resolution in the electrophoretic separation of (±)-catechin and sinapic acid when using these BGE containing CNTs. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. Capillary electrochromatography using fibers as stationary phases. (United States)

    Jinno, K; Watanabe, H; Saito, Y; Takeichi, T


    Fiber-packed capillary columns have been evaluated in chromatographic performance in capillary electrochromatography (CEC). The change of electroosmotic flow (EOF) velocity and selectivity using different kinds of fiber materials was examined. Although the EOF velocity among the different fiber packed columns was almost the same, retention of parabens was larger on the Kevlar-packed column than on the Zylon-packed one, and was larger on the as-span-type fiber-packed column than on the high-modulus-type packed one. Using 200 microm ID x 5 cm Kevlar packed column combined with a 100 microm ID x 20 cm precolumn capillary and a 530 microm ID x 45 cm postcolumn capillary, the separation of three parabens within 30 s was achieved. Other compounds were also separated in a few minutes by the fiber-packed CEC method.

  9. Capillary detectors for high resolution tracking

    CERN Document Server

    Annis, P


    We present a new tracking device based on glass capillary bundles or layers filled with highly purified liquid scintillator and read out at one end by means of image intensifiers and CCD devices. A large-volume prototype consisting of 5 × 105 capillaries with a diameter of 20 μm and a length of 180 cm and read out by a megapixel CCD has been tested with muon and neutrino beams at CERN. With this prototype a two track resolution of 33 μm was achieved with passing through muons. Images of neutrino interactions in a capillary bundle have also been acquired and analysed. Read-out chains based on Electron Bombarded CCD (EBCCD) and image pipeline devices are also investigated. Preliminary results obtained with a capillary bundle read out by an EBCCD are presented.

  10. Cycloaliphatic epoxy resin coating for capillary electrophoresis. (United States)

    Shah, Roopa S; Wang, Qinggang; Lee, Milton L


    Coating the interior surface of a fused-silica capillary with a polymeric material has long been used in capillary electrophoresis (CE) to reduce or eliminate electroosmotic flow and suppress adsorption. A cycloaliphatic epoxide-based resin was bonded to silane treated capillaries and crosslinked with a curing agent. The epoxy resin coating significantly reduced electroosmotic flow over a pH range of 3-10. This coating was sufficiently hydrophilic to suppress protein adsorption. The epoxy resin coated capillary was used to separate several acidic and basic proteins and peptides. Separation efficiencies greater than 400,000 theoretical plates were achieved. The relative standard deviations in migration times for proteins were methods.

  11. Uptake of water droplets by nonwetting capillaries

    CERN Document Server

    Willmott, Geoff R; Hendy, Shaun C


    We present direct experimental evidence that water droplets can spontaneously penetrate non-wetting capillaries, driven by the action of Laplace pressure due to high droplet curvature. Using high-speed optical imaging, microcapillaries of radius 50 to 150 micron, and water microdroplets of average radius between 100 and 1900 micron, we demonstrate that there is a critical droplet radius below which water droplets can be taken up by hydrophobised glass and polytetrafluoroethylene (PTFE) capillaries. The rate of capillary uptake is shown to depend strongly on droplet size, with smaller droplets being absorbed more quickly. Droplet size is also shown to influence meniscus motion in a pre-filled non-wetting capillary, and quantitative measurements of this effect result in a derived water-PTFE static contact angle between 96 degrees and 114 degrees. Our measurements confirm recent theoretical predictions and simulations for metal nanodroplets penetrating carbon nanotubes (CNTs). The results are relevant to a wide ...

  12. Capillary Optics generate stronger X-rays (United States)


    NASA scientist, in the Space Sciences lab at Marshall, works with capillary optics that generate more intense X-rays than conventional sources. This capability is useful in studying the structure of important proteins.

  13. Applicability of chemically modified capillaries in chiral capillary electrophoresis for methamphetamine profiling. (United States)

    Iwata, Yuko T; Mikuma, Toshiyasu; Kuwayama, Kenji; Tsujikawa, Kenji; Miyaguchi, Hajime; Kanamori, Tatsuyuki; Inoue, Hiroyuki


    We examined the applicability of chemically modified capillaries on the chiral capillary electrophoresis of essential compounds for methamphetamine (MA) profiling (MA, amphetamine, ephedrine, pseudoephedrine, norephedrine, and norpseudoephedrine) using highly sulfated γ-cyclodextrin as a chiral selector. Four types of chemically modified capillaries, namely, FunCap-CE/Type D (possessing diol groups), Type A (amino groups), Type C (carboxyl groups), and Type S (sulfate groups), were evaluated. Repeatability, speed, and good chiral resolution sufficient for routine MA profiling were achieved with the Type S capillary.

  14. Electrophoretic deposition of a bioactive Si, Ca-rich glass coating on 316L stainless steel for biomedical applications

    Directory of Open Access Journals (Sweden)

    H. H. Rodríguez


    Full Text Available This work consisted in the development and characterization of a vitroceramic coating on 316L stainless steel bymeans of electrophoretic deposition (EPD. This vitroceramic coating was obtained through a Si-, Ca-rich glas coating crystallization. The electrophoretic deposition tests were performed on 316L stainless steel mechanically polished substrates. The results suggest that the electrophoretic coatings adhered well to the metallic surfaces. Theresults demonstrate that the crystallized coatings are potentially bioactive, because a dense and homogeneous apatite layer, similar to a bone, makes up.

  15. Unusual intraosseous capillary hemangioma of the mandible. (United States)

    Dereci, Omur; Acikalin, Mustafa Fuat; Ay, Sinan


    Intraosseous hemangioma is a benign vascular neoplasm, which is mostly seen in vertebrae, maxillofacial bones, and long bones. Intraosseous hemangioma is rarely seen on jaw bones compared to other skeletal bones and usually occurs in the cavernous form. Capillary intraosseous hemangioma of jaws is an uncommon form of intraosseous hemangioma and has not been thoroughly described so far. In this study, a case of capillary intraosseous hemangioma of the mandible was presented with relevant literature review.

  16. Unusual intraosseous capillary hemangioma of the mandible


    Dereci, Omur; Acikalin, Mustafa Fuat; Ay, Sinan


    Intraosseous hemangioma is a benign vascular neoplasm, which is mostly seen in vertebrae, maxillofacial bones, and long bones. Intraosseous hemangioma is rarely seen on jaw bones compared to other skeletal bones and usually occurs in the cavernous form. Capillary intraosseous hemangioma of jaws is an uncommon form of intraosseous hemangioma and has not been thoroughly described so far. In this study, a case of capillary intraosseous hemangioma of the mandible was presented with relevant liter...

  17. Unusual intraosseous capillary hemangioma of the mandible


    Dereci, Omur; ACIKALIN, Mustafa Fuat; AY, Sinan


    Intraosseous hemangioma is a benign vascular neoplasm, which is mostly seen in vertebrae, maxillofacial bones, and long bones. Intraosseous hemangioma is rarely seen on jaw bones compared to other skeletal bones and usually occurs in the cavernous form. Capillary intraosseous hemangioma of jaws is an uncommon form of intraosseous hemangioma and has not been thoroughly described so far. In this study, a case of capillary intraosseous hemangioma of the mandible was presented with relevant liter...

  18. Effect of alteration of translation error rate on enzyme microheterogeneity as assessed by variation in single molecule electrophoretic mobility and catalytic activity. (United States)

    Nichols, Ellert R; Shadabi, Elnaz; Craig, Douglas B


    The role of translation error for Escherichia coli individual beta-galactosidase molecule catalytic and electrophoretic heterogeneity was investigated using CE-LIF. An E. coli rpsL mutant with a hyperaccurate translation phenotype produced enzyme molecules that exhibited significantly less catalytic heterogeneity but no reduction of electrophoretic heterogeneity. Enzyme expressed with streptomycin-induced translation error had increased thermolability, lower activity, and no significant change to catalytic or electrophoretic heterogeneity. Modeling of the electrophoretic behaviour of beta-galactosidase suggested that variation of the hydrodynamic radius may be the most significant contributor to electrophoretic heterogeneity.

  19. Cell adhesion during bullet motion in capillaries. (United States)

    Takeishi, Naoki; Imai, Yohsuke; Ishida, Shunichi; Omori, Toshihiro; Kamm, Roger D; Ishikawa, Takuji


    A numerical analysis is presented of cell adhesion in capillaries whose diameter is comparable to or smaller than that of the cell. In contrast to a large number of previous efforts on leukocyte and tumor cell rolling, much is still unknown about cell motion in capillaries. The solid and fluid mechanics of a cell in flow was coupled with a slip bond model of ligand-receptor interactions. When the size of a capillary was reduced, the cell always transitioned to "bullet-like" motion, with a consequent decrease in the velocity of the cell. A state diagram was obtained for various values of capillary diameter and receptor density. We found that bullet motion enables firm adhesion of a cell to the capillary wall even for a weak ligand-receptor binding. We also quantified effects of various parameters, including the dissociation rate constant, the spring constant, and the reactive compliance on the characteristics of cell motion. Our results suggest that even under the interaction between P-selectin glycoprotein ligand-1 (PSGL-1) and P-selectin, which is mainly responsible for leukocyte rolling, a cell is able to show firm adhesion in a small capillary. These findings may help in understanding such phenomena as leukocyte plugging and cancer metastasis. Copyright © 2016 the American Physiological Society.

  20. Bundled capillary electrophoresis using microstructured fibres. (United States)

    Rogers, Benjamin; Gibson, Graham T T; Oleschuk, Richard D


    Joule heating, arising from the electric current passing through the capillary, causes many undesired effects in CE that ultimately result in band broadening. The use of narrow-bore capillaries helps to solve this problem as smaller cross-sectional area results in decreased Joule heating and the rate of heat dissipation is increased by the larger surface-to-volume ratio. Issues arising from such small capillaries, such as poor detection sensitivity, low loading capacity and high flow-induced backpressure (complicating capillary loading) can be avoided by using a bundle of small capillaries operating simultaneously that share buffer reservoirs. Microstructured fibres, originally designed as waveguides in the telecommunication industry, are essentially a bundle of parallel ∼5 μm id channels that extend the length of a fibre having otherwise similar dimensions to conventional CE capillaries. This work presents the use of microstructured fibres for CZE, taking advantage of their relatively high surface-to-volume ratio and the small individual size of each channel to effect highly efficient separations, particularly for dye-labelled peptides.

  1. Ion guiding in curved glass capillaries

    Energy Technology Data Exchange (ETDEWEB)

    Kojima, Takao M. [Atomic Physics Laboratory, RIKEN, 2-1 Hirosawa, Wako, Saitama 351-0198 (Japan); Ikeda, Tokihiro [Nishina Center for Accelerator-Based Science, RIKEN, 2-1 Hirosawa, Wako, Saitama 351-0198 (Japan); Kanai, Yasuyuki; Yamazaki, Yasunori [Atomic Physics Laboratory, RIKEN, 2-1 Hirosawa, Wako, Saitama 351-0198 (Japan)


    Straight and curved glass capillaries were tested for the guiding of 8 keV Ar{sup 8+} ion beams. The straight capillary was about 50 mm long and 0.87 mm/1.1 mm in inner/outer diameter. One of the two curved capillaries was similar, but was curved with a 270 mm radius. The other was 53 mm long, had diameters of 2.34 mm/2.99 mm, and was curved with a 150 mm radius. The corresponding bending angles of the two curved capillaries were 9.6° and 17.5°, respectively. Transmission through the straight capillary disappeared when the tilt angle was larger than 5°. The curved capillaries guided the ion beams into their corresponding bending angles, which were much larger than 5°, with transmission efficiencies of a few tens percent. This demonstrates the possibility of developing a new scheme of simple small beam deflectors and related beam optics.

  2. Controle do tempo de protrombina em sangue capilar e venoso em pacientes com anticoagulação oral: correlação e concordância Comparative study of a portable system for prothrombin monitoring using capillary blood against venous blood measurements in patients using oral anticoagulants: correlation and concordance

    Directory of Open Access Journals (Sweden)

    Tiago Luiz Luz Leiria


    Full Text Available FUNDAMENTO: O uso de anticoagulantes orais (ACO é comum na prática cardiológica, tendo como principais indicações a fibrilação atrial e próteses valvares. Os pacientes em uso de ACO necessitam de controle freqüente do tempo de protrombina (TP. Novos sistemas portáteis de monitorização, para medida do tempo de protrombina, sem necessidade da coleta de sangue por venopunção, facilitam a rotina desses pacientes. OBJETIVO: Comparar as medidas do TP realizadas pelo sistema Coaguchek S®, em sangue capilar, com o método padrão em sangue venoso. MÉTODOS: Cento e vinte e sete pacientes em acompanhamento no ambulatório de anticoagulação do Instituto de Cardiologia foram submetidos ao método convencional e coleta de sangue capilar da polpa digital para medida com o sistema Coaguchek S®. RESULTADOS: A idade foi de 58±14 anos, 90% eram brancos. As indicações de ACO foram fibrilação atrial 49,6% e próteses valvares 37,0%. O coeficiente de correlação r s foi 0,90 (p 3,5 foi de Kappa 73,5%. O sistema Coaguchek S® superestimou o INR em 0,15±0,85 unidades. Valores acima de 3,5 unidades de INR mostram discrepância importante entre as duas técnicas. CONCLUSÕES: O sistema Coaguchek S® mostrou boa correlação e bom grau de concordância quando comparado com o controle, com resultados menores que 4. Porém, valores de INR acima de 3,5 ainda necessitam de confirmação com o método padrão.BACKGROUND: Oral anticoagulants (OAC are widely used in cardiology and are mainly indicated in cases of atrial fibrillation and prosthetic heart valves. Regular prothrombin time (PT control is required for patients using OAC. New portable monitoring systems for measuring prothrombin time, eliminate the need to collect blood by venous puncture and facilitate daily life for these patients. OBJECTIVE: To compare PT measurements using the Coaguchek S™ system with capillary blood and the standard method in venous blood. METHODS: One hundred and

  3. Determining CO2-brine relative permeability and capillary pressure simultaneously: an insight to capillary entrance and end effects (United States)

    Chen, X.; Kianinejad, A.; DiCarlo, D. A.


    CO2-brine relative permeability relations are important parameters in modeling scenarios such as CO2 sequestration in saline aquifers and CO2 enhanced recovery in oil reservoir. Many steady-state experimental studies on CO2-brine relative permeability showed that the CO2-brine relative permeability differs greatly from typical oil-brine relative permeability. Particularly, they reported a very small endpoint CO2 relative permeability of 0.1~0.2 at a relative high residual water saturation of 0.4~0.6. In this study, we hypothesize the measured low endpoint CO2 relative permeability in previous studies was an experimental artifact that is primary due to low CO2 viscosity. We conducted steady-state CO2 drainage experiments by co-injecting equlibrated CO2 and brine into a long (60.8 cm) and low permeability (116-mD) Berea sandstone core at 20 °C and 1500 psi. During every experiment, both the overall pressure drop across the core and the pressure drops of the five independent and continuous sections of the core were monitored. The in-situ saturation was measured with a medical X-ray Computed Tomography (CT) scanner. In the center three sections where saturation was uniform, we determined the relative permeability to both brine and CO2 phases. In the entrance and exit sections, both measured pressure gradients and saturation were non-uniform. To cope with this, we make several self-consistent assumptions that reveal the nature of capillary entrance and effect in steady-state two-phase core flooding experiments. Based on these assumptions we determined the relative permeability to CO2 and CO2-brine capillary pressure simultaneously using measured pressure drops. We found: (1) a much higher endpoint CO2 relative permeability of 0.58 at a water saturation of 48%, (2) the entrance region with non-uniform saturation expanded CO2 relative permeability data to much lower water saturation, (3) the determined CO2-brine capillary pressure curve is self-consistent and matches

  4. Paper capillary force driven hollow channel as a platform for multiphase flows bioassays

    Directory of Open Access Journals (Sweden)

    Zheng Tengfei


    Full Text Available This paper develops a simple, inexpensive, and portable diagnostic assays that may be useful in remote settings, and in particular, in less industrialized countries where simple assays are becoming increasingly important for detecting disease and monitoring health. In this assays, the paper capillary force is first used to transport complex fluids such as whole blood or colloidal suspensions that contain particulates in a new type channel - paper capillary driven hollow channel, which offset the disadvantages of current paper microfluidic technologies. To demonstrate the various applications of the paper capillary force driven hollow channel, several devices are design and made to complete the purpose of exhibiting laminar flow in a T-junction microchannel, sheath a core stream in a three-inlet channel and transportation whole blood.

  5. Assessing 2D electrophoretic mobility spectroscopy (2D MOSY) for analytical applications. (United States)

    Fang, Yuan; Yushmanov, Pavel V; Furó, István


    Electrophoretic displacement of charged entity phase modulates the spectrum acquired in electrophoretic NMR experiments, and this modulation can be presented via 2D FT as 2D mobility spectroscopy (MOSY) spectra. We compare in various mixed solutions the chemical selectivity provided by 2D MOSY spectra with that provided by 2D diffusion-ordered spectroscopy (DOSY) spectra and demonstrate, under the conditions explored, a superior performance of the former method. 2D MOSY compares also favourably with closely related LC-NMR methods. The shape of 2D MOSY spectra in complex mixtures is strongly modulated by the pH of the sample, a feature that has potential for areas such as in drug discovery and metabolomics. Copyright © 2016 The Authors. Magnetic Resonance in Chemistry published by John Wiley & Sons Ltd. StartCopTextCopyright © 2016 The Authors. Magnetic Resonance in Chemistry published by John Wiley & Sons Ltd.

  6. Stabilization of green bodies via sacrificial gelling agent during electrophoretic deposition (United States)

    Worsley, Marcus A.; Kuntz, Joshua D.; Rose, Klint A.


    In one embodiment, a method for electrophoretic deposition of a three-dimensionally patterned green body includes suspending a first material in a gelling agent above a patterned electrode of an electrophoretic deposition (EPD) chamber, and gelling the suspension while applying a first electric field to the suspension to cause desired patterning of the first material in a resulting gelation. In another embodiment, a ceramic, metal, or cermet includes a plurality of layers, wherein each layer includes a gradient in composition, microstructure, and/or density in an x-y plane oriented parallel to a plane of deposition of the plurality of layers along a predetermined distance in a z-direction perpendicular to the plane of deposition.

  7. Cathode electrophoretic technology for bonded NdFeB permanent magnet

    Institute of Scientific and Technical Information of China (English)

    CHEN Gang; YANG Xiao-lin; GAO Dan-ying; NI Jian-sen; XU Hui; ZHOU Bang-xin


    The bonded NdFeB permanent magnet was painted by cathode electrophoretic technology. The effect of technological parameters on the thickness of the layer was researched. The optimum voltage, time, electrophoresis temperature, area-ratio and spacing between cathode and anode are 220-250 V, 2-3 min, 25-32 ℃, 7-10 cm and (2-4)∶1, respectively. After treated under optimum conditions, the excellent corrosion resistance of the bonded magnet is achieved, with temperature and humidity resistant time of 468 h, brine-fast resistant time of 48 h. The cathode electrophoretic technology and treating process were successfully applied to produce bonded magnets with mass capacity of tens of million pieces per year.

  8. Molecular Dynamics Simulations Illuminate the Role of Counterion Condensation in the Electrophoretic Transport of Homogalacturonans. (United States)

    Irani, Amir H; Owen, Jessie L; Mercadante, Davide; Williams, Martin A K


    Homogalacturonans (HGs) are polysaccharide copolymers of galacturonic acid and its methylesterified counterpart. The inter- and intramolecular distributions of the methylesterifed residues are vital behavior-determining characteristics of a sample's structure, and much experimental effort has been directed to their measurement. While many techniques are able to measure the sample-averaged degree of methylesterification (DM), the measurement of inter- and intramolecular charge distributions are challenging. Here, molecular dynamics (MD) simulations are used to calculate the electrophoretic mobilities of HGs that have different amounts and distributions of charges placed along the backbone. The simulations are shown to capture experimental results well, even for low-DM samples that possess high charge densities. In addition, they illuminate the role that local counterion condensation can play in the determination of the electrophoretic mobility of heterogeneous blocky polyelectrolytes that cannot be adequately described by a single chain-averaged charge spacing.

  9. Preparation and surface encapsulation of hollow TiO nanoparticles for electrophoretic displays

    Energy Technology Data Exchange (ETDEWEB)

    Zhao Qian [School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072 (China); Tan Tingfeng, E-mail: [School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072 (China); Department of Materials Science and Engineering, Tianjin Institute of Urban Construction, Tianjin 300384 (China); Qi Peng [School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072 (China); Wang Shirong, E-mail: [School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072 (China); Bian Shuguang [High Technology Research and Development Center, Ministry of Science and Technology, Beijing 100044 (China); Li Xianggao; An Yong; Liu Zhaojun [School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072 (China)


    Hollow black TiO nanosparticles were obtained via deposition of inorganic coating on the surface of hollow core-shell polymer latex with Ti(OBu){sub 4} as precursor and subsequent calcination in ammonia gas. Hollow TiO particles were characterized by scanning electron microscope, transmission electronic microscopy, X-ray diffraction, and thermogravimetric analysis. Encapsulation of TiO via dispersion polymerization was promoved by pretreating the pigments with 3-(trimethoxysilyl) propyl methacrylate, making it possible to prepare hollow TiO-polymer particles. When St and DVB were used as polymerization monomer, hollow TiO-polymer core-shell particles came into being via dispersion polymerization, and the lipophilic degree is 28.57%. Glutin-arabic gum microcapsules containing TiO-polymer particles electrophoretic liquid were prepared using via complex coacervation. It was founded that hollow TiO-polymer particles had enough electrophoretic mobility after coating with polymer.

  10. Cobalt ferrite nanoparticles with improved aqueous colloidal stability and electrophoretic mobility

    Energy Technology Data Exchange (ETDEWEB)

    Munjal, Sandeep, E-mail:; Khare, Neeraj, E-mail: [Department of Physics, Indian Institute of Technology Delhi, Hauz Khas, New Delhi-110016 (India)


    We have synthesized CoFe{sub 2}O{sub 4} (CFO) nanoparticles of size ∼ 12.2 nm by hydrothermal synthesis method. To control the size of these CFO nanoparticles, oleic acid was used as a surfactant. The inverse spinel phase of the synthesized nanoparticles was confirmed by X-ray diffraction method. As synthesized oleic acid coated CFO (OA@CFO) nanoparticles has very less electrophoretic mobility in the water and are not water dispersible. These OA@CFO nanoparticles were successfully turned into water soluble phase with a better colloidal aqueous stability, through a chemical treatment using citric acid. The modified citric acid coated CFO (CA@CFO) nanoparticles were dispersible in water and form a stable aqueous solution with high electrophoretic mobility.

  11. Water management in capillary gas chromatographic air monitoring systems

    Energy Technology Data Exchange (ETDEWEB)

    Ryan, J.F.; Tippler, A.; Seeley, I. [Perkin-Elmer Corp., Wilton, CT (United States)


    Determining the identity and quantities of volatile organic compounds in air samples at trace levels often requires large sample sizes to achieve part-per-billion (ppb) detection levels. Given the volatile nature of many of low molecular weight chemical species, some form of cooling or adsorbent trapping of the organics is required. Unfortunately, cooling air samples below ambient temperature causes large amounts of water to be removed along with the organics. This paper investigates the magnitude of the problem and examines various alternatives for managing trapped water. The application of some of these techniques is demonstrated in a method for determining volatile polar and non-polar compounds in ambient air.

  12. Evaluation of capillary zone electrophoresis for the determination of protein composition in therapeutic immunoglobulins and human albumins. (United States)

    Christians, Stefan; van Treel, Nadine Denise; Bieniara, Gabriele; Eulig-Wien, Annika; Hanschmann, Kay-Martin; Giess, Siegfried


    Capillary zone electrophoresis (CZE) provides an alternative means of separating native proteins on the basis of their inherent electrophoretic mobilities. The major advantage of CZE is the quantification by UV detection, circumventing the drawbacks of staining and densitometry in the case of gel electrophoresis methods. The data of this validation study showed that CZE is a reliable assay for the determination of protein composition in therapeutic preparations of human albumin and human polyclonal immunoglobulins. Data obtained by CZE are in line with "historical" data obtained by the compendial method, provided that peak integration is performed without time correction. The focus here was to establish a rapid and reliable test to substitute the current gel based zone electrophoresis techniques for the control of protein composition of human immunoglobulins or albumins in the European Pharmacopoeia. We believe that the more advanced and modern CZE method described here is a very good alternative to the procedures currently described in the relevant monographs.

  13. αS1-casein in goat milk: identification of genetic variants by Capillary Zone Electrophoresis compared to Isoelectric Focusing

    Directory of Open Access Journals (Sweden)

    G. Enne


    Full Text Available AlphaS1 casein fraction in caprine milk is characterized by an important polymorphism due to substitution, deletion of amino acids and post trascriptional modifications (Grosclaude et al., 1994; Ferranti et al., 1997. This structural polymorphism is associated to a quantitative variability in protein expression related to different milk quality and dairy properties (Pierre et al., 1998; Remeuf, 1993; Vassal et al., 1994. Classical electrophoretic methods were applied to characterize the phenotypic variants at αS1-casein fraction (Addeo et al., 1988; Russo et al., 1986. During the last ten years capillary electrophoresis became an analytical technique for rapid and automated analysis requiring small sample volume and small solvent waste. These characteristics, together with the high resolution and the chance to give quantitative results, made this technique a useful tool........

  14. Characterization and stability of gold nanoparticles depending on their surface chemistry: Contribution of capillary zone electrophoresis to a quality control. (United States)

    Pallotta, Arnaud; Boudier, Ariane; Leroy, Pierre; Clarot, Igor


    Four kinds of gold nanoparticles (AuNP) quite similar in terms of gold core size (ca. 5nm) and shape (spherical) but differing by their surface chemistry (either negatively, or positively charged, or neutral) were synthesized. They were analyzed using both the classical physicochemical approach (spectrophotometry, dynamic light scattering coupled or not to electrophoresis and transmission electron microscopy) and capillary zone electrophoresis equipped with photodiode array detection. The results obtained by both methodologies (related to Surface Plasmon Band-maximal absorbance wavelength-, and zeta potential and electrophoretic mobilities) were well correlated. Moreover, taking advantage of the separation method, the sample heterogeneity was evaluated and an impurity profile was extracted. This allowed setting some specifications which were then applied on the one hand to a batch-to-batch survey to declare NP as conform or not after production and on the other hand to a stability study.

  15. Fast high-throughput method for the determination of acidity constants by capillary electrophoresis: I. Monoprotic weak acids and bases. (United States)

    Fuguet, Elisabet; Ràfols, Clara; Bosch, Elisabeth; Rosés, Martí


    A new and fast method to determine acidity constants of monoprotic weak acids and bases by capillary zone electrophoresis based on the use of an internal standard (compound of similar nature and acidity constant as the analyte) has been developed. This method requires only two electrophoretic runs for the determination of an acidity constant: a first one at a pH where both analyte and internal standard are totally ionized, and a second one at another pH where both are partially ionized. Furthermore, the method is not pH dependent, so an accurate measure of the pH of the buffer solutions is not needed. The acidity constants of several phenols and amines have been measured using internal standards of known pK(a), obtaining a mean deviation of 0.05 pH units compared to the literature values.

  16. Synthesis and Application of Carbon–Iron Oxide Microspheres’ Black Pigments in Electrophoretic Displays

    Directory of Open Access Journals (Sweden)

    Meng Xianwei


    Full Text Available Abstract Carbon–iron oxide microspheres’ black pigments (CIOMBs had been prepared via ultrasonic spray pyrolysis of aqueous solutions containing ferrous chloride and glucose. Due to the presence of carbon, CIOMBs not only exhibited remarkably acid resistance, but also could be well dispersed in both polar solvents and nonpolar solvent. Finally, dispersions of hollow CIOMBs in tetrachloroethylene had successfully been applied in electrophoretic displays.

  17. Protein electrophoretic markers in Israel: compilation of data and genetic affinities. (United States)

    Zoossmann-Diskin, A; Joel, A; Liron, M; Kerem, B; Shohat, M; Peleg, L


    A considerable body of data has been accumulated since the 1960s on protein electrophoretic markers in the Jewish populations of Israel. However, in some Jewish communities and for some markers insufficient information has been available. In addition, studies that tried to explore the genetic affinities of various Jewish populations mainly employed antigenic markers and frequently used a small and unrepresentative number of non-Jewish populations as comparisons. The primary objectives of the present study were to create a comprehensive database for protein electrophoretic markers in Israel and thereby to explore the genetic affinities of different Jewish populations. Published information on red cell enzyme and serum protein polymorphisms in Israeli Jewish populations was combined with new data obtained by protein electrophoresis and DNA PCR (polymerase chain reaction) methods to create the database. The genetic affinities were investigated by two methods. Ten Jewish populations were classified in a discriminant analysis based on nine markers and 65 non-Jewish populations. The same markers and populations were also used in a genetic distance analysis. The database contains new information on 15 protein electrophoretic markers in 14 Israeli populations, including three Jewish populations from Turkey, Tunisia and the Caucasus region, for which no or only scarce data were previously available. The discriminant analysis resulted in only two Jewish populations, from Iraq and Yemen, being classified within the Middle Eastern group. According to their genetic distances, no particular genetic similarity was observed between the various Jewish study populations. In contrast to the conclusions of several previous studies, there was no evidence for close genetic affinities among the Jewish populations or for a Middle Eastern origin for most of them. Since the study is the first to use only the more reliable protein electrophoretic markers, and an appropriately comprehensive

  18. Changes in the electrophoretic pattern of glucosidases during apple seeds stratification

    Directory of Open Access Journals (Sweden)

    A. Podstolski


    Full Text Available The technique of localization of glucosidases on disc electropherograms, based on reduction of 2,3,5-triphenyltetrazolium chloride by enzymatically liberated sugar is described. The changes in electrophoretic patterns of amygdaline, phloridzin and p-nitrophenyl-β-glucoside hydrolysing glucosidases during apple seed stratification were studied. The changes were correlated with earlier described changes in endogenous apple seed amygdaline and phloridzin contents.

  19. Study of preparation of BG/HA gradient coating on titanium alloy by electrophoretic deposition method

    Institute of Scientific and Technical Information of China (English)

    CHEN Xiao-ming; HAN Qing-rong; LI Shi-pu; XU Chuan-bo


    In this paper, a gradient bioactive coating made from modified bioglass (BG) and hydroxyapatite (HA) was prepared by electrophoretic deposition method(EPD)on the surface of titanium alloy. Strong bonding between the matrix and BG/HA gradient coating was got by sintering. Crystal composition of the coating was analyzed by XRD. The characteristics of surface and cross section of the coating were observed by SEM. Adhesive strength of the coating was tested by pull method. The optimizing technological parameters were determined.

  20. Hypotrichosis with keratosis pilaris: electrophoretical study of hair fibrous proteins from a patient. (United States)

    Dekio, S; Nagashima, T; Watanabe, Y; Jidoi, J


    S-carboxymethylated (SCM) fibrous proteins from the scalp hair of a patient with hypotrichosis with keratosis pilaris (HTKP) and from that of a normal individual were analyzed using two-dimensional electrophoresis. One SCM fibrous protein component was different electrophoretically in the HTKP patient. It is suggested that the brittleness of the HTKP hair might result from this alteration of the fibrous protein composition of the hair.

  1. Solid oxide fuel cell electrolytes produced via very low pressure suspension plasma spray and electrophoretic deposition


    Fleetwood, James D


    Solid oxide fuel cells (SOFCs) are a promising element of comprehensive energy policies due to their direct mechanism for converting the oxidization of fuel, such as hydrogen, into electrical energy. Both very low pressure plasma spray and electrophoretic deposition allow working with high melting temperature SOFC suspension based feedstock on complex surfaces, such as in non-planar SOFC designs. Dense, thin electrolytes of ideal composition for SOFCs can be fabricated with each of these proc...

  2. Sol-gel synthesis of 45S5 bioglass – Prosthetic coating by electrophoretic deposition

    Directory of Open Access Journals (Sweden)

    Faure Joel


    Full Text Available In this work, the 45S5 bioactive glass has been prepared by the sol-gel process using an organic acid catalyst instead of nitric acid usually used. The physico-chemical and structural characterizations confirmed and validated the elemental composition of the resulting glass. In addition, the 45S5 bioactive glass powder thus obtained was successfully used to elaborate by electrophoretic deposition a prosthetic coating on titanium alloy Ti6Al4V.

  3. Rice Husk Supported Catalysts for Degradation of Chlorobenzenes in Capillary Microreactor

    Directory of Open Access Journals (Sweden)

    Abdulelah Thabet


    Full Text Available Chlorinated organic pollutants are persistent, toxic, and ubiquitously distributed environmental contaminants. These compounds are highly bioaccumulative and adversely affect the ozone layer in the atmosphere. As such, their widespread usage is a major cause of environmental and health concern. Therefore, it is important to detoxify such compounds by environment friendly methods. In this work, rice husk supported platinum (RHA-Pt and titanium (RHA-Ti catalysts were used, for the first time, to investigate the detoxification of chlorobenzenes in a glass capillary microreactor. High potential (in kV range was applied to a reaction mixture containing buffer solution in the presence of catalyst. Due to high potential, hydroxyl and hydrogen radicals were produced, and the reaction was monitored by gas chromatography-mass spectrometry. The main advantage of this capillary reactor is the in situ generation of hydrogen for the detoxification of chlorobenzene. Various experimental conditions influencing detoxification were optimized. Reaction performance of capillary microreactor was compared with conventional catalysis. Only 20 min is sufficient to completely detoxify chlorobenzene in capillary microreactor compared to 24 h reaction time in conventional catalytic method. The capillary microreactor is simple, easy to use, and suitable for the detoxification of a wide range of chlorinated organic pollutants.

  4. Electrophoretic deposition of iron catalyst on C-fiber textiles for the growth of carbon nanofibers. (United States)

    Lee, Sang-Won; Lee, Chang-Seop


    In this study, carbon nanofibers synthesis has been conducted by chemical vapor deposition on C-fiber textiles coated with an iron catalyst via electrophoretic deposition. C-fiber textiles were oxidized with nitric acid before the iron catalyst was plated by electrophoretic deposition. Due to oxidation, the hydroxyl group was created on the C-fiber textiles and was used as an active site for iron catalyst deposition. It was verified that the iron catalyst was deposited on the C-fiber textiles, while current, voltage, and deposition time varied and the concentration of electrolyte was kept constant in electrophoretic deposition. After being deposited, the iron particles were dried in oven for 24 hours and reduced by hydrogen gas in a furnace. Ethylene gas was introduced for the growth of carbon nanofibers and the growth temperature was then varied to find the optimal growth temperature of the carbon nanofibers. Thus, the characteristics of carbon nanofibers were analyzed by Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), N2-sorption (BET), X-Ray Diffraction (XRD), and X-ray Photoelectron Spectroscopy (XPS). It is verified that the iron particles were most evenly deposited at 0.1 A for 3 minutes. Carbon nanofibers grew to 150-200 nm most evenly at 600 degrees C via temperature variations in CVD.

  5. Sample injection and electrophoretic separation on a simple laminated paper based analytical device. (United States)

    Xu, Chunxiu; Zhong, Minghua; Cai, Longfei; Zheng, Qingyu; Zhang, Xiaojun


    We described a strategy to perform multistep operations on a simple laminated paper-based separation device by using electrokinetic flow to manipulate the fluids. A laminated crossed-channel paper-based separation device was fabricated by cutting a filter paper sheet followed by lamination. Multiple function units including sample loading, sample injection, and electrophoretic separation were integrated on a single paper based analytical device for the first time, by applying potential at different reservoirs for sample, sample waste, buffer, and buffer waste. As a proof-of-concept demonstration, mixed sample solution containing carmine and sunset yellow were loaded in the sampling channel, and then injected into separation channel followed by electrophoretic separation, by adjusting the potentials applied at the four terminals of sampling and separation channel. The effects of buffer pH, buffer concentration, channel width, and separation time on resolution of electrophoretic separation were studied. This strategy may be used to perform multistep operations such as reagent dilution, sample injection, mixing, reaction, and separation on a single microfluidic paper based analytical device, which is very attractive for building micro total analysis systems on microfluidic paper based analytical devices.

  6. Finger-powered electrophoretic transport of discrete droplets for portable digital microfluidics. (United States)

    Peng, Cheng; Wang, Yide; Sungtaek Ju, Y


    We report a finger-powered digital microfluidic device based on the electrophoretic transport of discrete droplets (EPD). An array of piezoelectric elements is connected in parallel to metal electrodes immersed in dielectric fluids. When deflected in a controlled sequence via human finger power, the piezoelectric elements charge and actuate droplets across each electrode pair through electrophoretic force. Successful droplet transportation requires the piezoelectric elements to provide both sufficient charge and voltage pulse duration. We quantify these requirements using numerical models to predict the electrical charges induced on the droplets and the corresponding electrophoretic forces. The models are experimentally validated by comparing the predicted and measured droplet translational velocities. We successfully demonstrated transport and merging of aqueous droplets over a range of droplet radii (0.6-0.9 mm). We further showed direct manipulation of body fluids, including droplets of saliva and urine, using our finger-powered EPD device. To facilitate practical implementation of multistep assays based on the approach, a hand/finger-rotated drum system with a programmable pattern of protrusions is designed to induce deflections of multiple piezoelectric elements and demonstrate programmable fluidic functions. An electrode-to-piezoelectric element connection scheme to minimize the number of piezoelectric elements necessary for a sequence of microfluidic functions is also explored. The present work establishes an engineering foundation to enable design and implementation of finger-powered portable EPD microfluidic devices.

  7. Protonation of the polyethyleneimine and titanium particles and their effect on the electrophoretic mobility and deposition

    Energy Technology Data Exchange (ETDEWEB)

    Lau, Kok-Tee, E-mail: [Faculty of Manufacturing Engineering, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100, Durian Tunggal, Melaka (Malaysia); Anand, T. Joseph Sahaya [Faculty of Manufacturing Engineering, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100, Durian Tunggal, Melaka (Malaysia); Sorrell, Charles C. [School of Materials Science and Engineering, UNSW Australia, Sydney, NSW 2052 (Australia)


    Proton activities of suspensions of Ti particles with added cationic polyelectrolyte as a function of acid additions have been investigated and compared in terms of the electrophoretic mobility and deposition yield. The proton activity in ethanol medium decreased with the addition of PEI polyelectrolyte and reduced further in the presence of Ti particles. The decrease in proton activity in the suspension indicates that protonation occurred on both the PEI molecules and Ti particles. It is proposed that the protonation of the amine groups of PEI and hydroxyl sites of Ti particle led to the formation of hydrogen bonding between the Ti particle and PEI molecules. Increase in the PEI and Ti with increasing acid addition translated to higher electrophoretic mobilities and deposition yield at low ranges of acetic acid addition (<0.75 vol%). - Highlights: • Protonation characteristics of polyelectrolytes and suspension particles are reported. • The protonation characteristics explained the electrophoretic mobility and yield results. • Adsorption mechanisms of protonated polyelectrolytes on the titanium particle is proposed. • Hydroxyl sites on the particles link the oxide particle and the polyelectrolyte molecules.

  8. Effect of molecular weight on the electrophoretic deposition of carbon black nanoparticles in moderately viscous systems. (United States)

    Modi, Satyam; Panwar, Artee; Mead, Joey L; Barry, Carol M F


    Electrophoretic deposition from viscous media has the potential to produce in-mold assembly of nanoparticles onto three-dimensional parts in high-rate, polymer melt-based processes like injection molding. The effects of the media's molecular weight on deposition behavior were investigated using a model system of carbon black and polystyrene in tetrahydrofuran. Increases in molecular weight reduced the electrophoretic deposition of the carbon black particles due to increases in suspension viscosity and preferential adsorption of the longer polystyrene chains on the carbon black particles. At low deposition times (≤5 s), only carbon black deposited onto the electrodes, but the deposition decreased with increasing molecular weight and the resultant increases in suspension viscosity. For longer deposition times, polystyrene codeposited with the carbon black, with the amount of polystyrene increasing with molecular weight and decreasing with greater charge on the polystyrene molecules. This deposition behavior suggests that use of lower molecular polymers and control of electrical properties will permit electrophoretic deposition of nanoparticles from polymer melts for high-rate, one-step fabrication of nano-optical devices, biochemical sensors, and nanoelectronics.

  9. Optimization of micellar electrokinetic capillary chromatography method using central composite design for the analysis of components in Yangwei granule

    Institute of Scientific and Technical Information of China (English)

    Shu-fang WANG; Hai-yan FANG; Hai-bin QU


    Central composite design (CCD), together with multiple linear regression, was successfully used to optimize the electrophoretic buffer system of micellar electrokinetic capillary chromatography (MEKC) for the determination of albiflorin, paeoniflorin, liquiritin, and glycyrrhizic acid in the traditional Chinese medicine (TCM) prescription,Yangwei granule. Concentrations of sodium deoxycholate (SDC) and borate, and proportions of ammonia, acetonitrile,and methanol were optimized. The total resolutions of peaks between the analytes and their adjacent peaks in real samples were integrated into the evaluation index of separation efficiency. The optimum electrophoretic buffer contained 80 mmol/L SDC, 20 mmol/L borate, 5% (v/v) methanol, 0.5% (v/v) ammonia, and 5% (v/v) acetonitrile. The correlation coefficients (R2) between the peak areas and the corresponding concentrations of analytes were greater than 0.9956. The limits of detection (LODs) (S/N=3) of the analytes were 0.97-4.00 μg/mi. The results indicate the superiority of CCD in optimizing the separation conditions of complex samples such as TCM prescriptions.

  10. Two-dimensional capillary electrophoresis: capillary isoelectric focusing and capillary zone electrophoresis with laser-induced fluorescence detection. (United States)

    Dickerson, Jane A; Ramsay, Lauren M; Dada, Oluwatosin O; Cermak, Nathan; Dovichi, Norman J


    CIEF and CZE are coupled with LIF detection to create an ultrasensitive 2-D separation method for proteins. In this method, two capillaries are joined through a buffer-filled interface. Separate power supplies control the potential at the injection end of the first capillary and at the interface; the detector is held at ground potential. Proteins are labeled with the fluorogenic reagent Chromeo P503, which preserves the isoelectric point of the labeled protein. The labeled proteins were mixed with ampholytes and injected into the first-dimension capillary. A focusing step was performed with the injection end of the capillary at high pH and the interface at low pH. To mobilize components, the interface was filled with a high pH buffer, which was compatible with the second-dimension separation. A fraction was transferred to the second-dimension capillary for separation. The process of fraction transfer and second dimension separation was repeated two dozen times. The separation produced a spot capacity of 125.

  11. Impaired skin capillary recruitment in essential hypertension is caused by both functional and structural capillary rarefaction

    NARCIS (Netherlands)

    Serne, EH; Gans, ROB; ter Maaten, JC; Tangelder, GJ; Donker, AJM; Stehouwer, CDA


    Capillary rarefaction occurs in many tissues in patients with essential hypertension and may contribute to an increased vascular resistance and impaired muscle metabolism. Rarefaction may be caused by a structural (anatomic) absence of capillaries, functional nonperfusion, or both. The aim of this s

  12. Systemic Capillary Leak Syndrome associated with hypovolemic shock and compartment syndrome. Use of transpulmonary thermodilution technique for volume management

    Directory of Open Access Journals (Sweden)

    Schmid Roland M


    Full Text Available Abstract Systemic Capillary Leak Syndrome (SCLS is a rare disorder characterized by increased capillary hyperpermeability leading to hypovolemic shock due to a markedly increased shift of fluid and protein from the intravascular to the interstitial space. Hemoconcentration, hypoalbuminemia and a monoclonal gammopathy are characteristic laboratory findings. Here we present a patient who suffered from SCLS with hypovolemic shock and compartment syndrome of both lower legs and thighs. Volume and catecholamine management was guided using transpulmonary thermodilution. Extended hemodynamic monitoring for volume and catecholamine management as well as monitoring of muscle compartment pressure is of crucial importance in SCLS patients.

  13. Triple-channel portable capillary electrophoresis instrument with individual background electrolytes for the concurrent separations of anionic and cationic species

    Energy Technology Data Exchange (ETDEWEB)

    Mai, Thanh Duc; Le, Minh Duc [Centre for Environmental Technology and Sustainable Development (CETASD), Hanoi University of Science, Nguyen Trai Street 334, Hanoi (Viet Nam); Sáiz, Jorge [Department of Analytical Chemistry, Physical Chemistry and Chemical Engineering, University of Alcalá, Ctra. Madrid-Barcelona Km 33.6, Alcalá de Henares, Madrid (Spain); Duong, Hong Anh [Centre for Environmental Technology and Sustainable Development (CETASD), Hanoi University of Science, Nguyen Trai Street 334, Hanoi (Viet Nam); Koenka, Israel Joel [University of Basel, Department of Chemistry, Spitalstrasse 51, 4056 Basel (Switzerland); Pham, Hung Viet, E-mail: [Centre for Environmental Technology and Sustainable Development (CETASD), Hanoi University of Science, Nguyen Trai Street 334, Hanoi (Viet Nam); Hauser, Peter C., E-mail: [University of Basel, Department of Chemistry, Spitalstrasse 51, 4056 Basel (Switzerland)


    The portable capillary electrophoresis instrument is automated and features three independent channels with different background electrolytes to allow the concurrent optimized determination of three different categories of charged analytes. The fluidic system is based on a miniature manifold which is based on mechanically milled channels for injection of samples and buffers. The planar manifold pattern was designed to minimize the number of electronic valves required for each channel. The system utilizes pneumatic pressurization to transport solutions at the grounded as well as the high voltage side of the separation capillaries. The instrument has a compact design, with all components arranged in a briefcase with dimensions of 45 (w) × 35 (d) × 15 cm (h) and a weight of about 15 kg. It can operate continuously for 8 h in the battery-powered mode if only one electrophoresis channel is in use, or for about 2.5 h in the case of simultaneous employment of all three channels. The different operations, i.e. capillary flushing, rinsing of the interfaces at both capillary ends, sample injection and electrophoretic separation, are activated automatically with a control program featuring a graphical user interface. For demonstration, the system was employed successfully for the concurrent separation of different inorganic cations and anions, organic preservatives, additives and artificial sweeteners in various beverage and food matrices. - Highlights: • The use of parallel channels allows the concurrent separation of different classes of analytes. • Separate background electrolytes allow individual optimization. • The instrument is compact and field portable.

  14. A Novel Polybrene/Chondroitin Sulfate C Double Coated Capillary and Its Application in Capillary Electrophoresis

    Institute of Scientific and Technical Information of China (English)

    DU,Ying-Xiang(杜迎翔); HONDA,Susumu; TAGA,Atsushi; LIU,Wen-Ying(刘文英); SUZUKI,Shigeo


    A new capillary coated by double polymer, polybrene/chondroitin sulfate C (P/CC), was developed using a simple procedure. The P/CC double coated capillary showed long lifetime,strong chemical stability and good reproducibility. It endured during more than 100 replicated analyses and was also tolerant to HCl (1 mol/L), NaOH (0.01 mol/L), CH3OH and CH3CN. The P/CC double coated capillary can be applied to basic drug analyses. The adsorption of basic drugs to the capillary wall was suppressed and the peak tailing greatly decreased. The use of the P/CC double coated capillary allowed excelent separation of the enantiomers of some basic drugs by using chondroitin sulfate C as the chiral selector, ami the peak symmetry of basic drugs was further improved under these conditions.

  15. Capillary blood glucose screening for gestational diabetes: a preliminary investigation. (United States)

    Landon, M B; Cembrowski, G S; Gabbe, S G


    Home glucose monitoring with the use of reflectance meters is an important adjunct in the care of pregnant women with insulin-dependent diabetes. The accuracy of reflectance meters for the assay of capillary glucose specimens has been well documented. The present preliminary study was undertaken to determine the utility of outpatient screening for gestational diabetes mellitus with the use of a reflectance meter (Accu-Chek, Boehringer Mannheim Co.). One hundred twenty-five patients in our high-risk practice had a standard 50 gm glucose load at 26 to 28 weeks' gestation. Capillary glucose values were measured on site with the Accu-Chek. Venous plasma glucose levels were measured by the central laboratory chemistry analyzer. While the laboratory (x) and meter (y) glucose determinations between the two sets of values were highly correlated (R = 0.89, p less than 0.001), there was a significant difference in their average values (x = 111.74, y = 136.35, p less than 0.0001). With the use of a receiver operator characteristic curve, a meter value of 160 mg/dl was determined as the optimal threshold for performing a 3-hour glucose tolerance test. The sensitivity and specificity with the use of a meter value of 160 mg/dl were 93% and 96%, respectively, for detecting an abnormal screening test in venous plasma (greater than or equal to 135 mg/dl). A total of 32 glucose tolerance tests were performed, with four patients included who had venous values less than 135 mg/dl. All eight patients with gestational diabetes mellitus were correctly identified. These data suggest that a glucose reflectance meter can be used for accurate outpatient screening of gestational diabetes mellitus. The potential advantages of capillary blood glucose screening include both cost and efficiency. Patients with abnormal screening values can be promptly identified and scheduled for a follow-up 3-hour glucose tolerance test.

  16. Photopolymerization of acrylamide as a new functionalization way of silica monoliths for hydrophilic interaction chromatography and coated silica capillaries for capillary electrophoresis. (United States)

    El-Debs, R; Marechal, A; Dugas, V; Demesmay, C


    A simple, rapid and localizable photochemical process for the preparation of hydrophilic coated capillary and silica-based monolithic capillary columns is described. The process involves the free radical polymerization of acrylamide monomers onto acrylate pre-activated silica surface triggered by UV photoinitiation. The experimental conditions (monomer content, time of irradiation) were optimized on silica monolithic columns by monitoring the evolution of the chromatographic properties (retention, permeability, efficiency) in HILIC mode using a set of nucleosides as test solutes. Compared to thermal polymerization process, the photoinitiation allows the preparation of highly retentive and efficient HILIC monolithic columns in less than 10min of irradiation. This process was then successfully applied to the surface coating of fused silica capillary walls. In addition to its relative high stability and ability to reduce the electroosmotic flow, this polyacrylamide coating is localizable. Benefits of this localizable photochemical process are highlighted through the conception of an in-line integrated bimodal microseparation tool combining a SPE preconcentration step on a photografted silica monolith and an electrokinetic separation step in a polyacrylamide photopolymerized capillary section. Two neuropeptides are used as model solutes to illustrate the suitability of this approach.

  17. Synthetic Capillaries to Control Microscopic Blood Flow (United States)

    Sarveswaran, K.; Kurz, V.; Dong, Z.; Tanaka, T.; Penny, S.; Timp, G.


    Capillaries pervade human physiology. The mean intercapillary distance is only about 100 μm in human tissue, which indicates the extent of nutrient diffusion. In engineered tissue the lack of capillaries, along with the associated perfusion, is problematic because it leads to hypoxic stress and necrosis. However, a capillary is not easy to engineer due to its complex cytoarchitecture. Here, it is shown that it is possible to create in vitro, in about 30 min, a tubular microenvironment with an elastic modulus and porosity consistent with human tissue that functionally mimicks a bona fide capillary using “live cell lithography”(LCL) to control the type and position of cells on a composite hydrogel scaffold. Furthermore, it is established that these constructs support the forces associated with blood flow, and produce nutrient gradients similar to those measured in vivo. With LCL, capillaries can be constructed with single cell precision—no other method for tissue engineering offers such precision. Since the time required for assembly scales with the number of cells, this method is likely to be adapted first to create minimal functional units of human tissue that constitute organs, consisting of a heterogeneous population of 100–1000 cells, organized hierarchically to express a predictable function.

  18. Restructuring and aging in a capillary suspension. (United States)

    Koos, Erin; Kannowade, Wolfgang; Willenbacher, Norbert


    The rheological properties of capillary suspensions, suspensions with small amounts of an added immiscible fluid, are dramatically altered with the addition of the secondary fluid. We investigate a capillary suspension to determine how the network ages and restructures at rest and under applied external shear deformation. The present work uses calcium carbonate suspended in silicone oil (11 % solids) with added water as a model system. Aging of capillary suspensions and their response to applied oscillatory shear is distinctly different from particulate gels dominated by the van der Waals forces. The suspensions dominated by the capillary force are very sensitive to oscillatory flow, with the linear viscoelastic regime ending at a deformation of only 0.1% and demonstrating power-law aging behavior. This aging persists for long times at low deformations or for shorter times with a sudden decrease in the strength at higher deformations. This aging behavior suggests that the network is able to rearrange and even rupture. This same sensitivity is not demonstrated in shear flow where very high shear rates are required to rupture the agglomerates returning the apparent viscosity of capillary suspensions to the same viscosity as for the pure vdW suspension. A transitional region is also present at intermediate water contents wherein the material response depends very strongly on the type, strength, and duration of the external forcing.

  19. Micro-injector for capillary electrophoresis. (United States)

    Sáiz, Jorge; Koenka, Israel Joel; García-Ruiz, Carmen; Müller, Beat; Chwalek, Thomas; Hauser, Peter C


    A novel micro-injector for capillary electrophoresis for the handling of samples with volumes down to as little as 300 nL was designed and built in our laboratory for analyses in which the available volume is a limitation. The sample is placed into a small cavity located directly in front of the separation capillary, and the injection is then carried out automatically by controlled pressurization of the chamber with compressed air. The system also allows automated flushing of the injection chamber as well as of the capillary. In a trial with a capillary electrophoresis system with contactless conductivity detector, employing a capillary of 25 μm diameter, the results showed good stability of migration times and peak areas. To illustrate the technique, the fast separation of five inorganic cations (Na(+) , K(+) , NH4 (+) , Ca(2+) , and Mg(2+) ) was set up. This could be achieved in less than 3 min, with good limits of detection (10 μM) and linear ranges (between about 10 and 1000 μM). The system was demonstrated for the determination of the inorganic cations in porewater samples of a lake sediment core.

  20. Compartment Syndrome as a Result of Systemic Capillary Leak Syndrome

    Directory of Open Access Journals (Sweden)

    Kwadwo Kyeremanteng


    Full Text Available Objective. To describe a single case of Systemic Capillary Leak Syndrome (SCLS with a rare complication of compartment syndrome. Patient. Our patient is a 57-year-old male, referred to our hospital due to polycythemia (hemoglobin (Hgb of 220 g/L, hypotension, acute renal failure, and bilateral calf pain. Measurements and Main Results. The patient required bilateral forearm, thigh, and calf fasciotomies during his ICU stay and continuous renal replacement therapy was instituted following onset of acute renal failure and oliguria. Ongoing hemodynamic (Norepinephrine and Milrinone infusion and respiratory (ventilator support in the ICU was provided until resolution of intravascular fluid extravasation. Conclusions. SCLS is an extremely rare disorder characterized by unexplained episodic capillary hyperpermeability, which causes shift of volume and protein from the intravascular space to the interstitial space. Patients present with significant hypotension, hemoconcentration, hypovolemia, and oliguria. Severe edema results from leakage of fluid and proteins into tissue. The most important part of treatment is maintaining stable hemodynamics, ruling out other causes of shock and diligent monitoring for complications. Awareness of the clinical syndrome with the rare complication of compartment syndrome may help guide investigations and diagnoses of these critically ill patients.

  1. Novel absorption detection techniques for capillary electrophoresis

    Energy Technology Data Exchange (ETDEWEB)

    Xue, Yongjun [Iowa State Univ., Ames, IA (United States)


    Capillary electrophoresis (CE) has emerged as one of the most versatile separation methods. However, efficient separation is not sufficient unless coupled to adequate detection. The narrow inner diameter (I.D.) of the capillary column raises a big challenge to detection methods. For UV-vis absorption detection, the concentration sensitivity is only at the μM level. Most commercial CE instruments are equipped with incoherent UV-vis lamps. Low-brightness, instability and inefficient coupling of the light source with the capillary limit the further improvement of UV-vis absorption detection in CE. The goals of this research have been to show the utility of laser-based absorption detection. The approaches involve: on-column double-beam laser absorption detection and its application to the detection of small ions and proteins, and absorption detection with the bubble-shaped flow cell.

  2. Capillary rise of water in hydrophilic nanopores

    CERN Document Server

    Gruener, Simon; Wallacher, Dirk; Kityk, Andriy V; Huber, Patrick; 10.1103/PhysRevE.79.067301


    We report on the capillary rise of water in three-dimensional networks of hydrophilic silica pores with 3.5nm and 5nm mean radii, respectively (porous Vycor monoliths). We find classical square root of time Lucas-Washburn laws for the imbibition dynamics over the entire capillary rise times of up to 16h investigated. Provided we assume two preadsorbed strongly bound layers of water molecules resting at the silica walls, which corresponds to a negative velocity slip length of -0.5nm for water flow in silica nanopores, we can describe the filling process by a retained fluidity and capillarity of water in the pore center. This anticipated partitioning in two dynamic components reflects the structural-thermodynamic partitioning in strongly silica bound water layers and capillary condensed water in the pore center which is documented by sorption isotherm measurements.

  3. Capillary self-assembly of floating bodies (United States)

    Jung, Sunghwan; Thompson, Paul; Bush, John


    We study the self-assembly of bodies supported on the water surface by surface tension. Attractive and repulsive capillary forces exist between menisci of, respectively, the same and opposite signs. In nature, floating objects (e.g. mosquito larvae) thus interact through capillary forces to form coherent packings on the water surface. We here present the results of an experimental investigation of such capillary pattern formation. Thin elliptical metal sheets were designed to have variable shape, flexibility and mass distribution. On the water surface, mono-, bi-, or tri-polar menisci could thus be achieved. The influence of the form of the menisci on the packings arising from the interaction of multiple floaters is explored. Biological applications are discussed.

  4. Photosensitive diazotized poly(ethylene glycol) covalent capillary coatings for analysis of proteins by capillary electrophoresis. (United States)

    Yu, Bing; Chen, Xin; Cong, Hailin; Shu, Xi; Peng, Qiaohong


    A new method for the fabrication of covalently cross-linked capillary coatings of poly(ethylene glycol) (PEG) is described using diazotized PEG (diazo-PEG) as a new photosensitive coating agent. The film of diazo-PEG depends on ionic bonding and was first prepared on the inner surface of capillary by self-assembly, and ionic bonding was converted into covalent bonding after reaction of ultraviolet light with diazo groups through unique photochemical reaction. The covalently bonded coating impedance adsorption of protein on the central surface of capillary and hence the four proteins ribonuclease A, cytochrome c, bovine serum albumin, and lysosome can be baseline separated by using capillary electrophoresis (CE). The covalently cross-linked diazo-PEG capillary column coatings not only improved the CE separation performance for proteins compared to non-covalently cross-linked coatings or bare capillary but also showed a remarkable chemical solidity and repeatability. Because photosensitive diazo-PEG took the place of the highly noxious and silane moisture-sensitive coating reagents in the fabrication of covalent coating, this technique shows the advantage of being environment-friendly and having a high efficiency for CE to make the covalently bonded capillaries.

  5. Mach-like capillary-gravity wakes. (United States)

    Moisy, Frédéric; Rabaud, Marc


    We determine experimentally the angle α of maximum wave amplitude in the far-field wake behind a vertical surface-piercing cylinder translated at constant velocity U for Bond numbers Bo(D)=D/λ(c) ranging between 0.1 and 4.2, where D is the cylinder diameter and λ(c) the capillary length. In all cases the wake angle is found to follow a Mach-like law at large velocity, α∼U(-1), but with different prefactors depending on the value of Bo(D). For small Bo(D) (large capillary effects), the wake angle approximately follows the law α≃c(g,min)/U, where c(g,min) is the minimum group velocity of capillary-gravity waves. For larger Bo(D) (weak capillary effects), we recover a law α∼√[gD]/U similar to that found for ship wakes at large velocity [Rabaud and Moisy, Phys. Rev. Lett. 110, 214503 (2013)]. Using the general property of dispersive waves that the characteristic wavelength of the wave packet emitted by a disturbance is of order of the disturbance size, we propose a simple model that describes the transition between these two Mach-like regimes as the Bond number is varied. We show that the new capillary law α≃c(g,min)/U originates from the presence of a capillary cusp angle (distinct from the usual gravity cusp angle), along which the energy radiated by the disturbance accumulates for Bond numbers of order of unity. This model, complemented by numerical simulations of the surface elevation induced by a moving Gaussian pressure disturbance, is in qualitative agreement with experimental measurements.

  6. Separation of selected peptides by capillary electroendoosmotic chromatography using 3 microns reversed-phase bonded silica and mixed-mode phases. (United States)

    Walhagen, K; Unger, K K; Olsson, A M; Hearn, M T


    The retention behaviour and selectivity of selected basic, neutral and acidic peptides have been studied by capillary electroendoosmotic chromatography (CEC) with Hypersil C8, C18, Hypersil mixed-mode, and Spherisorb C18/SCX columns, 250 (335) mm x 100 microns, packed with 3 microns particles, and eluted with mobile phases composed of acetonitrile-triethylamine-phosphoric acid (TEAP) at pH 3.0 using a Hewlett-Packard Model HP3DCE capillary electrophoresis system. The selected peptides were desmopressin (D), two analogues (A and B) of desmopressin, oxytocin (O) and carbetocin (C). The peptides eluted either before or after the electroendoosmotic flow (EOF) marker, depending on the concentration of acetonitrile used and the buffer ionic strength. The retention and selectivity of these peptides under CEC conditions were compared to their behaviour in free zone capillary electrophoresis (CZE), where the separation mode was based on the electrophoretic migration of the analytes due to their charge and Stokes radius properties. In addition, their retention behaviour in RP-HPLC was also examined. As a result, it can be concluded that the elution process of this group of synthetic peptides in CEC with a TEAP buffer at pH 3.0 is mediated by a combination of both electrophoretic migration processes and retention mechanisms involving hydrophobic as well as silanophilic interactions. This CEC method when operated with these 3 microns reversed-phase and mixed-mode sorbents with peptides is thus a hybrid of two well-known analytical methods, namely CZE and RP-HPLC. However, the retention behaviour and selectivity of the selected peptides differs significantly in the CEC mode compared to the RP-HPLC or CZE modes. Therefore this CEC method with these peptides represents an orthogonal analytical separation procedure that is complimentary to both of these alternative techniques.

  7. Monitoring the quality consistency of Weibizhi tablets by micellar electrokinetic chromatography fingerprints combined with multivariate statistical analyses, the simple quantified ratio fingerprint method, and the fingerprint-efficacy relationship. (United States)

    Liu, Yingchun; Sun, Guoxiang; Wang, Yan; Yang, Lanping; Yang, Fangliang


    Micellar electrokinetic chromatography fingerprinting combined with quantification was successfully developed and applied to monitor the quality consistency of Weibizhi tablets, which is a classical compound preparation used to treat gastric ulcers. A background electrolyte composed of 57 mmol/L sodium borate, 21 mmol/L sodium dodecylsulfate and 100 mmol/L sodium hydroxide was used to separate compounds. To optimize capillary electrophoresis conditions, multivariate statistical analyses were applied. First, the most important factors influencing sample electrophoretic behavior were identified as background electrolyte concentrations. Then, a Box-Benhnken design response surface strategy using resolution index RF as an integrated response was set up to correlate factors with response. RF reflects the effective signal amount, resolution, and signal homogenization in an electropherogram, thus, it was regarded as an excellent indicator. In fingerprint assessments, simple quantified ratio fingerprint method was established for comprehensive quality discrimination of traditional Chinese medicines/herbal medicines from qualitative and quantitative perspectives, by which the quality of 27 samples from the same manufacturer were well differentiated. In addition, the fingerprint-efficacy relationship between fingerprints and antioxidant activities was established using partial least squares regression, which provided important medicinal efficacy information for quality control. The present study offered an efficient means for monitoring Weibizhi tablet quality consistency.

  8. Intracerebral Capillary Hemangioma: A Case Report

    Energy Technology Data Exchange (ETDEWEB)

    Youn, In Young; Kim, Jae Kyun; Byun, Jun Soo [Dept. of Radiology, Chung Ang University Medical Center, Chung Ang University College of Medicine, Seoul (Korea, Republic of); Park, Eon Sub [Dept. of Radiology, Chung Ang University Medical Center, Chung Ang University College of Medicine, Seoul (Korea, Republic of)


    Intracerebral capillary hemangiomas are very rare benign vascular tumors that mostly occur during infancy. We described a 69-year-old man with generalized tonic-clonic seizures who was diagnosed with an intracranial mass. Multidetector computed tomography, magnetic resonance imaging and digital subtraction angiography studies were performed for evaluation of brain, and there was a well-enhancing mass found in the right temporal lobe without a definite feeding vessel. The patient underwent surgery and the pathologic examination demonstrated marked proliferation of small vessels with a lobular pattern in the brain parenchyma, which was confirmed to be capillary hemangioma.

  9. Capillary origami and superhydrophobic membrane surfaces (United States)

    Geraldi, N. R.; Ouali, F. F.; Morris, R. H.; McHale, G.; Newton, M. I.


    Capillary origami uses surface tension to fold and shape solid films and membranes into three-dimensional structures. It uses the fact that solid surfaces, no matter how hydrophobic, will tend to adhere to and wrap around the surface of a liquid. In this work, we report that a superhydrophobic coating can be created, which can completely suppress wrapping as a contacting water droplet evaporates. We also show that using a wetting azeotropic solution of allyl alcohol, which penetrates the surface features, can enhance liquid adhesion and create more powerful Capillary Origami. These findings create the possibility of selectively shaping membrane substrates.

  10. Microfluidic chip-capillary electrophoresis devices

    CERN Document Server

    Fung, Ying Sing; Du, Fuying; Guo, Wenpeng; Ma, Tongmei; Nie, Zhou; Sun, Hui; Wu, Ruige; Zhao, Wenfeng


    Capillary electrophoresis (CE) and microfluidic chip (MC) devices are relatively mature technologies, but this book demonstrates how they can be integrated into a single, revolutionary device that can provide on-site analysis of samples when laboratory services are unavailable. By introducing the combination of CE and MC technology, Microfluidic Chip-Capillary Electrophoresis Devices broadens the scope of chemical analysis, particularly in the biomedical, food, and environmental sciences.The book gives an overview of the development of MC and CE technology as well as technology that now allows


    Directory of Open Access Journals (Sweden)

    A. S. Markova


    Full Text Available The paper describes a clinical case of testicular capillary hemangioma in a 24-year-old man undergone a partial resection of the testis with the intraoperative morphological examination. Testicular capillary hemangioma is a rare benign tumor of a vascular origin, which can be similar to malignant testicular tumors on the clinical presentation, as well as on the imaging methods, in particular to seminoma. The intraoperative histological study can assist in avoiding organ-removing surgical interventions in diagnostically ambiguous cases if a benign testicular tumor is diagnosed.

  12. Sequence-specific nucleic acid mobility using a reversible block copolymer gel matrix and DNA amphiphiles (lipid-DNA) in capillary and microfluidic electrophoretic separations

    NARCIS (Netherlands)

    Wagler, Patrick; Minero, Gabriel Antonio S.; Tangen, Uwe; de Vries, Jan Willem; Prusty, Deepak; Kwak, Minseok; Herrmann, Andreas; McCaskill, John S.


    Reversible noncovalent but sequence-dependent attachment of DNA to gels is shown to allow programmable mobility processing of DNA populations. The covalent attachment of DNA oligomers to polyacrylamide gels using acrydite-modified oligonucleotides has enabled sequence-specific mobility assays for

  13. Sequence-specific nucleic acid mobility using a reversible block copolymer gel matrix and DNA amphiphiles (lipid-DNA) in capillary and microfluidic electrophoretic separations

    NARCIS (Netherlands)

    Wagler, Patrick; Minero, Gabriel Antonio S.; Tangen, Uwe; de Vries, Jan Willem; Prusty, Deepak; Kwak, Minseok; Herrmann, Andreas; McCaskill, John S.


    Reversible noncovalent but sequence-dependent attachment of DNA to gels is shown to allow programmable mobility processing of DNA populations. The covalent attachment of DNA oligomers to polyacrylamide gels using acrydite-modified oligonucleotides has enabled sequence-specific mobility assays for DN

  14. [Reparation and application of perfluorodecyl modified silica monolithic capillary column in extraction and enrichment of perfluorooctane sulfonates]. (United States)

    Huang, Ke; Zhou, Naiyuan; Chen, Bo


    A perfluorodecyl modified silica monolithic capillary column has been prepared by using sol-gel method. The preparation steps included hydrolysis of alkoxy silane, fasculation of silanol, gelation, aging, meso-pore preparation, drying and surface modification. It could be used as a solid phase extraction (SPE) microcolumn for extraction and enrichment of perfluorooctane sulfonate (PFOS). The enrichment characteristics and efficiency of the perfluorodecyl modified monolithic silica capillary column has been investigated and compared with C18 silica monolithic capillary column. The results indicated that the perfluorodecyl modified silica monolithic capillary column ( 15 cm x 75 microm) had a higher adsorption capacity and a better enrichment selectivity for PFOS. The average adsorption capacity of the perfluorodecyl modified silica monolithic capillary column was 75 ng. And when the PFOS mass concentration in sample was 0. 25 mg/L, the enrichment factor was 29-fold in average. Owing to the good performance of the perfluorodecyl modified silica monolithic capillary column, it can be used for the extraction and enrichment of trace PFOS in water to meet the requirements of water quality monitoring and analysis.

  15. Molecular analysis and physicochemical properties of electrophoretic variants of wild soybean Glycine soja storage proteins. (United States)

    Fukuda, Takako; Maruyama, Nobuyuki; Kanazawa, Akira; Abe, Jun; Shimamoto, Yoshiya; Hiemori, Miki; Tsuji, Hideaki; Tanisaka, Takatoshi; Utsumi, Shigeru


    Cultivated soybeans (Glycine max) are derived from wild soybeans (Glycine soja) and can be crossed with them to produce fertile offspring. The latter exhibit greater genetic variation than the former, suggesting a possibility that wild soybeans contain storage proteins with properties different from and better than those of cultivated soybeans. To identify a wild soybean suitable for breeding a new soybean cultivar, we analyzed seed proteins from 390 lines of wild soybeans by electrophoresis. We found some lines containing electrophoretic variants of glycinin and beta-conglycinin subunits: one line containing a small alpha' subunit of beta-conglycinin and two and five lines containing small A3 and large A4 polypeptides of glycinin, respectively. Beta-Conglycinin and glycinin containing such variant subunits exhibited solubility and emulsifying ability similar to those of the predominant types of wild and cultivated soybeans. Glycinins containing small A3 and large A4 gave a shoulder derived from the start of denaturation at a temperature 4 degrees C lower than that of glycinin from the predominant types of wild and cultivated soybeans, although their thermal denaturation midpoint temperatures were very similar to each other. Cloning and sequencing of the predominant and variant subunit cDNAs revealed that the small alpha' and the small A3 lacked 24 amino acid residues in the extension region and four amino acid residues in the hypervariable region, respectively, and that the large A4 did not have an insert corresponding to the difference in the electrophoretic mobility but Arg279 and Gln305 were replaced by glutamine and histidine, respectively, in the hypervariable region. These suggest that small differences even in the hypervariable region can affect the thermal stability, as well as the electrophoretic mobilities, of the proteins.

  16. Computer-assisted identification of multitrace electrophoretic patterns in differential display experiments. (United States)

    Vähämaa, Heidi; Ojala, Pekka; Pahikkala, Tapio; Nevalainen, Olli S; Lahesmaa, Riitta; Aittokallio, Tero


    Modern multicapillary devices allow researchers to address increasingly complex biological questions involving comparisons of gene expression patterns across electrophoretic samples under various experimental conditions. As labor-intensive visual evaluation of the electrophoretic results is often the bottleneck of large-scale differential display (DD) studies, one way to further streamline this process is to focus only on a highly compressed list of the most potential patterns that are likely to provide reliable findings. To enable the identification of such candidate patterns, we present a computer-assisted method for objective ranking of multitrace peak patterns in DD experiments. The fundamental component of the multitrace pattern ranking method (MRANK) is the multiple alignment algorithm that allows for discovery of patterns involving sets of peak complexes from various electrophoretic samples. A score value is attached to each detected pattern which characterizes how accurately the pattern resembles the desired pattern query, freely defined by the researcher. The ranked pattern list produced by MRANK is validated against visual evaluation in terms of detecting and ranking a group of relevant patterns in a DD analysis of T-helper cell differentiation. We demonstrate high enrichment of the desired patterns on top of the score-ranked list (e.g., 90% of the visually selected patterns are discovered by looking through the first 3% of patterns in the ranked list of all patterns). The results suggest that a substantial amount of manual labor can be saved without compromising the accuracy of the findings by prioritizing the patterns according to MRANK output in the visual confirmation phase.

  17. High-frequency capillary waves excited by oscillating microbubbles

    CERN Document Server

    Pommella, Angelo; Poulichet, Vincent; Garbin, Valeria


    This fluid dynamics video shows high-frequency capillary waves excited by the volumetric oscillations of microbubbles near a free surface. The frequency of the capillary waves is controlled by the oscillation frequency of the microbubbles, which are driven by an ultrasound field. Radial capillary waves produced by single bubbles and interference patterns generated by the superposition of capillary waves from multiple bubbles are shown.

  18. Varying nanoparticle pseudostationary phase plug length during capillary electrophoresis† (United States)

    Subramaniam, Varuni; Griffith, Lindsay; Haes, Amanda J.


    Capillary electrophoresis based separations of the hypothesized Parkinson’s disease biomarkers dopamine, epinephrine, pyrocatechol, L-3,4-dihydroxyphenylalanine (L-DOPA), glutathione, and uric acid are performed in the presence of a 1 nM 11-mercaptoundecanoic acid functionalized gold (Au@MUA) nanoparticle pseudostationary phase plug. Au@MUA nanoparticles are monitored in the capillary and remain stable in the presence of electrically-driven flow. Migration times, peak areas, and relative velocity changes (vs. no pseudostationary) are monitored upon varying (1) the Au@MUA nanoparticle pseudostationary phase plug length at a fixed separation voltage and (2) the separation voltage for a fixed Au@MUA nanoparticle pseudostationary phase plug length. For instance, the migration times of positively charged dopamine and epinephrine increase slightly as the nanoparticle pseudostationary phase plug length increases with concomitant decreases in peak areas and relative velocities as a result of attractive forces between the positively charged analytes and the negatively charged nanoparticles. Migration times for neutral pyrocatechol and slightly negative L-DOPA did not exhibit significant changes with increasing nanoparticle pseudostationary plug length; however, reduction in peak areas for these two molecules were evident and attributed to non-specific interactions (i.e. hydrogen bonding and van der Waals interactions) between the biomarkers and nanoparticles. Moreover, negatively charged uric acid and glutathione displayed progressively decreasing migration times and peak areas and as a result, increased relative velocities with increasing nanoparticle pseudostationary phase plug length. These trends are attributed to partitioning and exchanging with 11-mercaptoundecanoic acid on nanoparticle surfaces for uric acid and glutathione, respectively. Similar trends are observed when the separation voltage decreased thereby suggesting that nanoparticle-biomarker interaction

  19. Determination of lipoic acid in human urine by capillary zone electrophoresis. (United States)

    Kubalczyk, Paweł; Głowacki, Rafał


    Fast, simple, and accurate CE method enabling determination of lipoic acid (LA) in human urine has been developed and validated. LA is a disulfide-containing natural compound absorbed from the organism's diet. Due to powerful antioxidant activity, LA has been used for prevention and treatment of various diseases and disorders, e.g. cardiovascular diseases, neurodegenerative disorders, and cancer. The proposed analytical procedure consists of liquid-liquid sample extraction, reduction of LA with tris(2-carboxyethyl)phosphine, derivatization with 1-benzyl-2-chloropyridinium bromide (BCPB) followed by field amplified sample injection stacking, capillary zone electrophoresis separation, and ultraviolet-absorbance detection of LA-BCPB derivative at 322 nm. Effective baseline electrophoretic separation was achieved within 6 min under the separation voltage of 20 kV (∼80 μA) using a standard fused-silica capillary (effective length 51.5 cm, 75 μm id) and BGE consisted of 0.05 mol/L borate buffer adjusted to pH 9. The experimentally determined limit of detection for LA in urine was 1.2 μmol/L. The calibration curve obtained for LA in urine showed linearity in the range 2.5-80 μmol/L, with R(2) 0.9998. The relative standard deviation of the points of the calibration curve was lower than 10%. The analytical procedure was successfully applied to analysis of real urine samples from seven healthy volunteers who received single 100 mg dose of LA. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. [Determination of gambogic acid in Gamboge by non-aqueous capillary electrophoresis]. (United States)

    Ou, Wanlu; Li, Yujuan; Shi, Dongdong; Qu, Feng


    Gambogic acid (GA), a kind of caged xanthones, has low solubility in water. A non-aqueous capillary electrophoresis (NACE) was established for the determination of GA in Gamboge based on the optimized conditions. The effect of 20% - 60% methanol or acetonitrile spiked in running solution was investigated. The effects of compositions, concentration, pH, additives like β-cyclodextrin in running buffer were thoroughly studied. Applied voltage and applied temperature were also observed. Optimal electrophoretic conditions were as follows: 20 mmol/L sodium borohydride solution (pH 9. 86) containing 40% (v/v) acetonitrile, 10 mmol/L β-cyclodextrin as running buffer, applied voltage of 10 kV, capillary temperature of 30 °C and detection wavelength of 280 nm. The calibration curve had good linearity in the range of 2-2 000 mg/L with the correlation coefficient of 0. 999 6. The limit of quantification (S/N= 3) of the method was 2 mg/L. The quantifications of GA in Gamboge from different producing places including Vietnam, Thailand, Burma, India were 1. 67-472.40 mg/g with the RSD (n= 3) of 1.12% -2.60%. The content of Gamboge from Vietnam is obviously low while the others are high. The recoveries of GA spiked in real samples ranged from 95. 2% to 105. 6%. The method of NACE is simple, efficient and of good reproducibility, can be served as a novel reference to identify and control the quality of Gamboge.

  1. Variation in the electrophoretic karyotype of Brazilian strains of Metarhizium anisopliae

    Directory of Open Access Journals (Sweden)

    Valadares-Inglis Maria Cléria


    Full Text Available Pulsed-field gel electrophoresis (PFGE was used to separate chromosome-sized DNA molecules of four strains of Metarhizium anisopliae from Brazil. Metarhizium anisopliae isolates from Japan have been reported as possessing seven chromosomes. Variation was observed among the Brazilian strains and the chromosomal DNA was resolved into eight bands for strain CG46. Densitometric analysis of PFGE gels suggested that the other three Brazilian strains also possess eight chromosomes, with two chromosomes migrating as doublets under the electrophoretic conditions used. The genome size was estimated as varying between 23.39 to 31.88 Mb, not including possible doublet chromosomes.

  2. Electrophoretic deposition of titania nanoparticles: Wet density of deposits during EPD

    Indian Academy of Sciences (India)

    Morteza Farrokhi-Rad; Taghi Shahrabi; Shirin Khanmohammadi


    Electrophoretic deposition (EPD) of titania nanoparticles was performed at different voltages and times. The wet density of deposits was calculated according to the Archimedes’ principle. The wet density as well as the electric field over the deposits increased with time and attained the plateau at longer times. The velocity at which particles attach to the deposit, strongly influences its wet density at initial times. However, the effect of electro-osmotic flow is dominant at longer times. The coating with higher wet density had the higher corrosion resistance in Ringer’s solution at 37.5 °C due to its closely packed and crack free microstructure.


    Directory of Open Access Journals (Sweden)



    Full Text Available 19 cases of beta-thalassemia (2 homozygotes and 17 heterozygotes were finding out in a large family in the district of Vaslui by biochemical and genetical metods. For a better estimation of the status of two homozygote patients as well as for the selection of suitable treatment procedures, radiological and hematological investigations were performed. The usefulness of the application of electrophoretic techniques in the finding of beta-thalassemia heterozygotes is pointed out and also is underlined the necessity to undertake studies of selected groups of human population in order to obtain a better estimation of beta-thalassemias frequency in south-west Romania.

  4. Phylogenetic relationships among wine yeast strains based on electrophoretic whole-cell protein patterns. (United States)

    Guillamón, J M; Querol, A; Jiménez, M; Huerta, T


    In the present work, a phylogenetic study based on protein electrophoretic profiles of Saccharomyces strains isolated from different Spanish wine regions has been carried out. Qualitative differences between the protein electrophoregrams were found at inter- and intraspecific level, but not between electrophoregrams of strains isolated at the same ecosystem. The numerical analysis of these results allowed us to conclude that intraspecific relationships are determined by ecological factors, as well as human influences (dispersion and artificial selection). A correlation between ecological and/or geographical origin and the relationships among strains was observed.

  5. Characterization of CdTe Films Deposited at Various Bath Temperatures and Concentrations Using Electrophoretic Deposition


    Zulkarnain Zainal; Mohd Norizam Md Daud; Azmi Zakaria; Mohd Sabri Mohd Ghazali; Atefeh Jafari; Wan Rafizah Wan Abdullah


    CdTe film was deposited using the electrophoretic deposition technique onto an ITO glass at various bath temperatures. Four batch film compositions were used by mixing 1 to 4 wt% concentration of CdTe powder with 10 mL of a solution of methanol and toluene. X-ray Diffraction analysis showed that the films exhibited polycrystalline nature of zinc-blende structure with the (111) orientation as the most prominent peak. From the Atomic Force Microscopy, the thickness and surface roughness of the ...

  6. Electrophoretic separation of A gamma and G gamma human globin chains in Nonidet P-40. (United States)

    Guerrasio, A; Saglio, G; Mazza, U; Pich, P; Camaschella, C; Ricco, G; Gianazza, E; Righetti, P G


    Electrophoresis in cellulose acetate in the presence of 3% Nonidet P-40 can resolve two neutral genetic variants, A gamma and G gamma human fetal globin chains. The ratio of these two chains, determined by densitometry of the electrophoretic strips, is in excellent agreement with the Gly-Ala ratio obtained by chemical analysis of the cyanogen bromide fragment gamma CB3. It is suggested that the detergent binds preferentially to the hydrophobic amino acid segment 133-141 in the A gamma chain, thus masking either a Lys or an Arg residue at the two extremes.

  7. Preparation of yttria-stabilized zirconia films for solid oxide fuel cells by electrophoretic deposition method

    Energy Technology Data Exchange (ETDEWEB)

    Ishihara, Tatsumi; Sato, Keiji; Mizuhara, Yukako; Takita, Yusaku (Oita Univ. (Japan). Faculty of Engineering)


    The electrophoretic deposition (EPD) method was applied for the preparation of yttria-stabilized zirconia (YSZ) films for a solid oxide fuel cell (SOFC). Dense YSZ films with uniform thickness can be readily prepared by EPD method. When the planar SOFC was fabricated by using La[sub 0.6]Sr[sub 0.4]MnO[sub 3] as a cathode and electroless plating Pt as an anode, the open circuit voltage and the maximum power density attained were 1.03 V and 1.87 W cm[sup -2], respectively. (author).

  8. Electrophoretic separation and detection of metalloproteins by X-ray fluorescence mapping. (United States)

    Khare, Tripti; Chishti, Yasmin; Finney, Lydia A


    All living systems depend on metalloproteins. Yet, while tools for the separation and identification of apo-proteins are well developed, those enabling identification and quantitation of individual metalloproteins within complex mixtures are still nascent. Here, we describe the electrophoretic separation of a mixture of carbonic anhydrase, ceruloplasmin, urease, and hemoglobin using native 2D gel electrophoresis and X-ray fluorescence mapping-an approach we have developed to be broadly applicable, not require specialized equipment for sample preparation, and likely to be extensible in the future.

  9. All solution processed organic thin film transistor-backplane with printing technology for electrophoretic display (United States)

    Lee, Myung W.; Song, C.K.


    In this study, solution processes were developed for backplane using an organic thin film transistor (OTFT) as a driving device for an electrophoretic display (EPD) panel. The processes covered not only the key device of OTFTs but also interlayer and pixel electrodes. The various materials and printing processes were adopted to achieve the requirements of devices and functioning layers. The performance of OTFT of the backplane was sufficient to drive EPD sheet by producing a mobility of 0.12 cm2/v x sec and on/off current ratio of 10(5).

  10. Current Developments in Electrophoretic and Chromatographic Separation Methods on Microfabricated Devices

    DEFF Research Database (Denmark)

    Kutter, Jörg Peter


    a brief overview of current developments in electrophoretic and chromatographic separation methods on microfabricated devices, and highlight some of the trends emerging from recent research results (published or pre-published before November 1999). (C)2000 Published by Elsevier Science B.V, All rights......Microchip-based separation techniques are essential elements in the development of fully integrated micro-total analysis systems, which are envisioned to become powerful instruments for obtaining and assessing analytical data in research, industry, and everyday life. This article's goal is to give...

  11. Note: A portable automatic capillary viscometer for transparent and opaque liquids (United States)

    Soltani Ghalehjooghi, A.; Minaei, S.; Gholipour Zanjani, N.; Beheshti, B.


    A portable automatic capillary viscometer, equipped with an AVR microcontroller, was designed and developed. The viscometer was calibrated with Certified Reference Material (CRM) s200 and utilized for measurement of kinematic viscosity. A quadratic equation was developed for calibration of the instrument at various temperatures. Also, a model was developed for viscosity determination in terms of the viscometer dimensions. Development of the portable viscometer provides for on-site monitoring of engine oil viscosity.

  12. Cyclodextrin-Functionalized Monolithic Capillary Columns: Preparation and Chiral Applications. (United States)

    Adly, Frady G; Antwi, Nana Yaa; Ghanem, Ashraf


    In this review, the recently reported approaches for the preparation of cyclodextrin-functionalized capillary monolithic columns are highlighted, with few applications in chiral separations using capillary liquid chromatography (CLC) and capillary electrochromatography (CEC). Chirality 28:97-109, 2016. © 2015 Wiley Periodicals, Inc.

  13. Nanoparticles as a tool in capillary electrochromatography


    Ribeiro, Susana


    Two different types of molecularly imprinted nanoparticles against (R)-propranolol were used to separate the enantiomers of propranolol in capillary electrochromatography mode, methacrylic acid based nanoparticles and core-shell molecularly imprinted polymer nanoparticles. Partial filling technique was used to avoid interference of molecularly imprinted polymer nanoparticles in UV detection. With methacrylic acid based nanoparticles it was not possible to obtain enantiomer s...

  14. Elastic deformation due to tangential capillary forces

    NARCIS (Netherlands)

    Das, Siddhartha; Marchand, Antonin; Andreotti, Bruno; Snoeijer, Jacco H.


    A sessile liquid drop can deform the substrate on which it rests if the solid is sufficiently “soft.” In this paper we compute the detailed spatial structure of the capillary forces exerted by the drop on the solid substrate using a model based on Density Functional Theory. We show that, in addition

  15. Macroscopic theory for capillary-pressure hysteresis. (United States)

    Athukorallage, Bhagya; Aulisa, Eugenio; Iyer, Ram; Zhang, Larry


    In this article, we present a theory of macroscopic contact angle hysteresis by considering the minimization of the Helmholtz free energy of a solid-liquid-gas system over a convex set, subject to a constant volume constraint. The liquid and solid surfaces in contact are assumed to adhere weakly to each other, causing the interfacial energy to be set-valued. A simple calculus of variations argument for the minimization of the Helmholtz energy leads to the Young-Laplace equation for the drop surface in contact with the gas and a variational inequality that yields contact angle hysteresis for advancing/receding flow. We also show that the Young-Laplace equation with a Dirichlet boundary condition together with the variational inequality yields a basic hysteresis operator that describes the relationship between capillary pressure and volume. We validate the theory using results from the experiment for a sessile macroscopic drop. Although the capillary effect is a complex phenomenon even for a droplet as various points along the contact line might be pinned, the capillary pressure and volume of the drop are scalar variables that encapsulate the global quasistatic energy information for the entire droplet. Studying the capillary pressure versus volume relationship greatly simplifies the understanding and modeling of the phenomenon just as scalar magnetic hysteresis graphs greatly aided the modeling of devices with magnetic materials.

  16. Capillary condensation between disks in two dimensions

    DEFF Research Database (Denmark)

    Gil, Tamir; Ipsen, John Hjorth


    Capillary condensation between two two-dimensional wetted circular substrates (disks) is studied by an effective free energy description of the wetting interface. The interfacial free-energy potential is developed on the basis of the theory for the wetting of a single disk, where interfacial capi....... The theory can be applied to the description of flocculations in two-dimensional systems of colloids....

  17. Electroviscous effects in capillary filling of nanochannels

    DEFF Research Database (Denmark)

    Mortensen, Asger; Kristensen, Anders


    We theoretically examine the widespread hypothesis of an electroviscous origin of the increase in apparent viscosity observed in recent experiments on capillary filling of nanochannels. Including Debye-layer corrections to the hydraulic resistance, we find that the apparent viscosity reaches a ma...

  18. Numerical simulations of capillary barrier field tests

    Energy Technology Data Exchange (ETDEWEB)

    Morris, C.E. [Univ. of Wollongong (Australia); Stormont, J.C. [Univ. of New Mexico, Albuquerque, NM (United States)


    Numerical simulations of two capillary barrier systems tested in the field were conducted to determine if an unsaturated flow model could accurately represent the observed results. The field data was collected from two 7-m long, 1.2-m thick capillary barriers built on a 10% grade that were being tested to investigate their ability to laterally divert water downslope. One system had a homogeneous fine layer, while the fine soil of the second barrier was layered to increase its ability to laterally divert infiltrating moisture. The barriers were subjected first to constant infiltration while minimizing evaporative losses and then were exposed to ambient conditions. The continuous infiltration period of the field tests for the two barrier systems was modelled to determine the ability of an existing code to accurately represent capillary barrier behavior embodied in these two designs. Differences between the field test and the model data were found, but in general the simulations appeared to adequately reproduce the response of the test systems. Accounting for moisture retention hysteresis in the layered system will potentially lead to more accurate modelling results and is likely to be important when developing reasonable predictions of capillary barrier behavior.

  19. Drops: The collapse of capillary jets (United States)

    Cordoba, Antonio; Cordoba, Diego; Fefferman, Charles; Fontelos, Marco A.


    The appearance of fluid filaments during the evolution of a viscous fluid jet is a commonly observed phenomenon. It is shown here that the break-up of such a jet subject to capillary forces is impossible through the collapse of a uniform filament. PMID:12172005

  20. Chemical power for microscopic robots in capillaries. (United States)

    Hogg, Tad; Freitas, Robert A


    The power available to microscopic robots (nanorobots) that oxidize bloodstream glucose while aggregated in circumferential rings on capillary walls is evaluated with a numerical model using axial symmetry and time-averaged release of oxygen from passing red blood cells. Robots about 1 microm in size can produce up to several tens of picowatts, in steady state, if they fully use oxygen reaching their surface from the blood plasma. Robots with pumps and tanks for onboard oxygen storage could collect oxygen to support burst power demands two to three orders of magnitude larger. We evaluate effects of oxygen depletion and local heating on surrounding tissue. These results give the power constraints when robots rely entirely on ambient available oxygen and identify aspects of the robot design significantly affecting available power. More generally, our numerical model provides an approach to evaluating robot design choices for nanomedicine treatments in and near capillaries. The power available to microscopic robots (nanorobots) that oxidize bloodstream glucose while aggregated in circumferential rings on capillary walls was evaluated in this study. The presented numerical model provides an approach to evaluating robot design choices for nanomedicine treatments in and near capillaries. Copyright 2010. Published by Elsevier Inc.

  1. Shift dynamics of capillary self-alignment

    NARCIS (Netherlands)

    Arutinov, G.; Mastrangeli, M.; Smits, E.C.P.; Heck, G.V.; Schoo, H.F.M.; Toonder, J.J.M. den; Dietzel, A.H.


    This paper describes the dynamics of capillary self-alignment of components with initial shift offsets from matching receptor sites. The analysis of the full uniaxial self-alignment dynamics of foil-based mesoscopic dies from pre-alignment to final settling evidenced three distinct, sequential regim

  2. Capillary Electrophoresis Analysis of Conventional Splicing Assays

    DEFF Research Database (Denmark)

    de Garibay, Gorka Ruiz; Acedo, Alberto; García-Casado, Zaida;


    of these assays is often challenging. Here, we explore this issue by conducting splicing assays in 31 BRCA2 genetic variants. All variants were assessed by RT-PCR followed by capillary electrophoresis and direct sequencing. If assays did not produce clear-cut outputs (Class-2 or Class-5 according to analytical...

  3. Microalgae amino acid extraction and analysis at nanomolar level using electroporation and capillary electrophoresis with laser-induced fluorescence detection. (United States)

    Nehmé, Reine; Atieh, Carla; Fayad, Syntia; Claude, Bérengère; Chartier, Agnès; Tannoury, Mona; Elleuch, Fatma; Abdelkafi, Slim; Pichon, Chantal; Morin, Philippe


    Amino acids play a key role in food analysis, clinical diagnostics, and biochemical research. Capillary electrophoresis with laser-induced fluorescence detection was used for the analysis of several amino acids. Amino acid labeling with fluorescein isothiocyanate was conducted using microwave-assisted derivatization at 80°C (680 W) during only 150 s. Good electrophoretic resolution was obtained using a background electrolyte composed of sodium tetraborate buffer (100 mM; pH 9.4) and β-cyclodextrin (10 mM), and the limits of quantification were 3-30 nM. The developed capillary electrophoresis with laser-induced fluorescence method was used to analyze amino acids in Dunaliella salina green algae grown under different conditions. A simple extraction technique based on electroporation of the cell membrane was introduced. A home-made apparatus allowed the application of direct and alternating voltages across the electrochemical compartment containing a suspension of microalgae in distilled water at 2.5 g/L. A direct voltage of 12 V applied for 4 min gave the optimum extraction yield. Results were comparable to those obtained with accelerated-solvent extraction. The efficiency of electroporation in destroying microalgae membranes was shown by examining the algae surface morphology using scanning electron microscopy. Stress conditions were found to induce the production of amino acids in Dunaliella salina cells. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. Separation and determination of strychnine and brucine in Strychnos nux-vomica L. and its preparation by nonaqueous capillary electrophoresis. (United States)

    Li, Yuqin; He, Xiaojun; Qi, Shengda; Gao, Wenhua; Chen, Xingguo; Hu, Zhide


    An easy, rapid method for simultaneous determination of strychnine and brucine in Strychnos nux-vomica L. and its preparation was developed by nonaqueous capillary electrophoresis (NACE) without pretreatment for the first time. Optimum separation was achieved with a fused-silica capillary column (50 cmx75 microm i.d.) and a running buffer containing 30 mM ammonium acetate, 1.0% acetic acid and 15% acetonitrile (ACN) in methanol medium. The applied voltage was 30.0 kV. The analytes were detected by UV at 214 nm. The effects of concentration of ammonium acetate, acetic acid and organic modifier on electrophoretic behavior of the analytes were studied. The established method with sophoridine as internal standard was linear in the range of 5-1000 mg/mL for both strychnine and brucine. The extracts of Strychnos nux-vomica and its preparation could be directly injected for determination with recoveries ranging from 94.5 to 104%.

  5. Enantiomeric separation of 13 new amphetamine-like designer drugs by capillary electrophoresis, using modified-B-cyclodextrins. (United States)

    Burrai, Lucia; Nieddu, Maria; Pirisi, Maria Antonietta; Carta, Antonio; Briguglio, Irene; Boatto, Gianpiero


    An easy-to-prepare chiral CE method for the enantiomeric separation of 13 new amphetamine-like designer drugs, using CDs as chiral selectors, was developed. Sulfated-β-CD was found to be the best chiral selector among the three used (sulfated-β-CD, caroboxymethyl-β-CD, dimethyl-β-CD). The separation of the analytes was achieved in a fused-silica gel capillary at 20 °C using an applied voltage of +25 kV. The optimized background electrolyte consisted of 63.5 mM H3 PO4 and 46.9 mM NaOH in water. Several electrophoretic parameters such as CD type, CD concentration (1 - 40 mg/mL), buffer pH (2.6, 3.6, 5.0, 6.0), length of the capillary (70 - 40 cm total length), amount of the organic solvent (methanol and acetonitrile) were investigated and optimized.

  6. Capillary electromigration techniques as tools for assessing the status of vitamins A, C and E in patients with cystic fibrosis. (United States)

    Olędzka, Ilona; Kaźmierska, Katarzyna; Plenis, Alina; Kamińska, Barbara; Bączek, Tomasz


    The purpose of this work is the evaluation of the nutritional status of patients with cystic fibrosis (CF), based on the level of vitamin C in urine and vitamins A and E in serum, using the fast, selective and fully automated micellar electrokinetic capillary chromatographic (MEKC) and microemulsion electrokinetic capillary chromatographic (MEEKC) methods. The optimization of parameters affecting the electrophoretic separation provided adequate separation of the analytes of interest in the short time of 8 min (MEKC) and 20 min (MEEKC). The developed methods were practical applications to evaluate the levels of vitamins A, C and E in real samples from 28 children suffering from cystic fibrosis and from 10 healthy volunteers. Based on the mean concentration values obtained in the two groups, it can be seen that the levels of each vitamin were lower in patients with CF than in healthy volunteers. In the case of vitamin E, these differences in both groups were statistically significant, while the disproportion of concentrations of vitamins A and C in both the studied groups were not so relevant. On the other hand, a principal component analysis (PCA) confirmed that in some patients with CF the concentration of vitamin A was significantly lower than in the control group. Thus, the future evaluation of the status of fat-soluble vitamins in the longer term for the evaluation of the nutritional status of patients with CF should be continued. The presented CE methods can become useful tools for the evaluation of the nutritional status of patients with CF.

  7. Analysis of the anti-Parkinson drug pramipexole in human urine by capillary electrophoresis with laser-induced fluorescence detection. (United States)

    Musenga, Alessandro; Kenndler, Ernst; Morganti, Emanuele; Rasi, Fabrizio; Raggi, Maria Augusta


    A sensitive method based on capillary electrophoresis with laser-induced fluorescence detection has been developed for the analysis of the non-ergoline dopamine agonist pramipexole in human urine. Separation was carried out in uncoated fused silica capillaries (75microm internal diameter, 75.0 and 60.0cm total and effective length, respectively), with a background electrolyte composed of borate buffer (50mM, pH 10.3), tetrabutylammonium bromide (30mM), and acetone (15%, v/v). Applying a 20kV voltage, the electrophoretic run is completed within 12min. A sample pre-treatment procedure based on liquid/liquid extraction with ethyl acetate, followed by derivatisation of pramipexole with fluorescein isothiocyanate at pH 9, allows the complete removal of biological interferences, with extraction yields always higher than 94.5%. Method validation gave good linearity (r(2)=0.9992) in the 25.0-1000ngmL(-1) range; limit of detection and limit of quantitation were 10.0 and 25.0ngmL(-1), respectively; precision was 90.0. The method was applied to the analysis of urine samples from patients undergoing therapy with pramipexole.

  8. In-capillary detection of fast antibody-peptide binding using fluorescence coupled capillary electrophoresis. (United States)

    Qin, Yuqin; Qiu, Lin; Qin, Haifang; Ding, Shumin; Liu, Li; Teng, Yiwan; Chen, Yao; Wang, Cheli; Li, Jinchen; Wang, Jianhao; Jiang, Pengju


    Herein, we report a technique for detecting the fast binding of antibody-peptide inside a capillary. Anti-HA was mixed and interacted with FAM-labeled HA tag (FAM-E4 ) inside the capillary. Fluorescence coupled capillary electrophoresis (CE-FL) was employed to measure and record the binding process. The efficiency of the antibody-peptide binding on in-capillary assays was found to be affected by the molar ratio. Furthermore, the stability of anti-HA-FAM-E4 complex was investigated as well. The results indicated that E4 YPYDVPDYA (E4) or TAMRA-E4 YPYDVPDYA (TAMRA-E4) had the same binding priorities with anti-HA. The addition of excess E4 or TAMRA-E4 could lead to partial dissociation of the complex and take a two-step mechanism including dissociation and association. This method can be applied to detect a wide range of biomolecular interactions.

  9. Preparation approaches of the coated capillaries with liposomes in capillary electrophoresis. (United States)

    Mei, Jie; Tian, Yan-Ping; He, Wen; Xiao, Yu-Xiu; Wei, Juan; Feng, Yu-Qi


    The use of liposomes as coating materials in capillary electrophoresis has recently emerged as an important and popular research area. There are three preparation methods that are commonly used for coating capillaries with liposomes, namely physical adsorption, avidin-biotin binding and covalent coupling. Herein, the three different coating methods were compared, and the liposome-coated capillaries prepared by these methods were evaluated by studying systematically their EOF characterization and performance (repeatability, reproducibility and lifetime). The amount of immobilized phospholipids and the interactions between liposome or phospholipid membrane and neutral compounds for the liposome-coated capillaries prepared by these methods were also investigated in detail. Finally, the merits and disadvantages for each coating method were reviewed.

  10. Performance evaluation and accuracy of passive capillary samplers (PCAPs) for estimating real-time drainage water fluxes (United States)

    Successful monitoring of pollutant transport through the soil profile requires accurate, reliable, and appropriate instrumentation to measure amount of drainage water or flux within the vadose layer. We evaluated the performance and accuracy of automated passive capillary wick samplers (PCAPs) for ...

  11. Recent advances of ionic liquids and polymeric ionic liquids in capillary electrophoresis and capillary electrochromatography. (United States)

    Tang, Sheng; Liu, Shujuan; Guo, Yong; Liu, Xia; Jiang, Shengxiang


    Ionic liquids (ILs) and polymeric ionic liquids (PILs) with unique and fascinating properties have drawn considerable interest for their use in separation science, especially in chromatographic techniques. In this article, significant contributions of ILs and PILs in the improvement of capillary electrophoresis and capillary electrochromatography are described, and a specific overview of the most relevant examples of their applications in the last five years is also given. Accordingly, some general conclusions and future perspectives in these areas are discussed.

  12. Determination of endogenous ions in intercellular fluid using capillary ultrafiltration and microdialysis probes. (United States)

    Linhares, M C; Kissinger, P T


    Capillary ultrafiltration probes are novel sampling tools for continuously monitoring small molecules in the extracellular fluid of awake animals. Capillary ultrafiltration uses a vacuum applied to hydrophilic membrane fibres and extracts intercellular fluid and quantitatively recover many small hydrophilic molecules. The effects of continuously removing a small amount of fluid from the interstitial space are not known. The concentration of sodium, potassium, calcium and inorganic phosphorus were determined in the collected ultrafiltrates from subcutaneous tissue. These values were compared to literature values and to concentrations determined for the same animals using microdialysis. The concentrations of sodium, potassium, calcium and inorganic phosphorous were found to be 140 +/- 4, 3.7 +/- 0.1, 1.1 +/- 0.1 and 1.7 +/- 0.1 mM, respectively, in the subcutaneous ultrafiltrates obtained from rats. These corresponded very well with literature values and microdialysates, obtained, using pure water as the perfusate, in subcutaneous tissue. The concentration of sodium and potassium were determined to be 142 +/- 2 mM and 3.6 +/- 0.2 mM, respectively, for the dialysates. Hyperinsulinemic-induced decrease in intercellular potassium levels under a euglycemic clamp were monitored using capillary ultrafiltration probes in rats to further validate this technique for monitoring small molecule dynamics in the intercellular space. The intercellular level of potassium in rats decreased from 3.6 +/- 0.5 to 2.6 +/- 0.3 mM after an acute dose of pork insulin.

  13. Preparation of Electrophoretic Ink Microcapsules and Electrophoretic Display Prototype%电子墨水微胶囊及电泳显示原型器件的制备

    Institute of Scientific and Technical Information of China (English)

    荣宇; 吴刚; 陈红征; 汪茫


    TiO2 particles coated with polystyrene which were prepared via in situ polymerization and oil green dye were dispersed in tetrachloroethylene and xylene, the mixture came to be electrophoretic ink and was encapsulated in to microcapsules by complex coacervation from gelatin and a hydrolyzed copolymer of styrene and maleic anhydride(SMA). It was demonstrated that the membranes of the microcapsules were formed from nano sized coacervate droplets resulting from gelation and hydrolyzed SMA, which leads to a compact membrane structure. Microcapsules were characterized in terms of microstructure, morphologies by scanning electron microscopy(SEM). Electrophoretic display prototype was prepared by coating electrophoretic ink microcapsules slurry on ITO glass with nearly single layer and sealed by UV curable adhesires. The characters “Zheda” in Chinese was firstly displayed at a low volt 9 V D. C..

  14. A complete soil hydraulic model accounting for capillary and adsorptive water retention, capillary and film conductivity, and hysteresis

    NARCIS (Netherlands)

    Sakai, Masaru; Van Genuchten, Martinus Th; Alazba, A. A.; Setiawan, Budi Indra; Minasny, Budiman


    A soil hydraulic model that considers capillary hysteretic and adsorptive water retention as well as capillary and film conductivity covering the complete soil moisture range is presented. The model was obtained by incorporating the capillary hysteresis model of Parker and Lenhard into the hydraulic

  15. Simultaneous determination of the beta-blocker atenolol and several complementary antihypertensive agents in pharmaceutical formulations and urine by capillary zone electrophoresis. (United States)

    Maguregui, M I; Jiménez, R M; Alonso, R M


    A simple capillary zone electrophoresis method is developed for the quantitation of the beta-blocker atenolol and the complementary antihypertensive agents bendroflumethiazide, amiloride, and hydrochlorothiazide in human urine samples. The electrophoretic separation is performed using a 78-cm x 75-micron-i.d. (70-cm effective length) fused-silica capillary. A borate buffer (pH 9) is used as running electrolyte. The sample is hydrostatically introduced for 20 s, and the running voltage is 25 kV at the injector end of the capillary. The analysis of urine samples requires the optimization of solid-phase extraction methods, achieving recoveries > or = 61% for all the drugs and good separation from the urine matrix. The method is successfully applied to the determination of these compounds in pharmaceutical formulations and in urine samples collected after the intake of Neatenol Diu (100 mg atenolol-5 mg bendroflumethiazide) and Kalten (50 mg atenolol-25 mg hydrochlorothiazide-2.5 mg amiloride). The method is validated in terms of reproducibility, linearity, and accuracy.

  16. Ultrasound-assisted magnetic solid-phase extraction for the determination of some transition metals in Orujo spirit samples by capillary electrophoresis. (United States)

    Peña Crecente, Rosa M; Lovera, Carlha Gutiérrez; García, Julia Barciela; Latorre, Carlos Herrero; Martín, Sagrario García


    Ultrasound-assisted magnetic solid-phase extraction coupled to capillary electrophoresis was optimized for the preconcentration and determination of Zn(II), Cu(II), Mn(II) and Cd(II) as their complexes with 1,10-phenanthroline (Phen). Both pre- and on-capillary complexations were employed to obtain stable metal-Phen complexes. The parameters that have an influence on the electrophoretic separation and the MSPE process were studied and optimized using different experimental designs. Metals were extracted from 10 mL of sample at pH 5 using 3mg of magnetic particles functionalized with carboxylic groups. The metals were eluted as metal-Phen complexes and analyzed by capillary electrophoresis. The method showed low limits of detection for metals 0.49-2.19 μg L(-1), and high preconcentration factors, 39-44, The efficiencies of the extraction method were in the range 77.1-87.5% and the precision (RSD < 10%) and accuracy were between 98.2% and 101.6%. The method was applied to the determination of the aforementioned metals in Galician Orujo spirit samples.

  17. Simultaneous determination of six toxic alkaloids in human plasma and urine using capillary zone electrophoresis coupled to time-of-flight mass spectrometry. (United States)

    Yu, Zhuhong; Wu, Zhongping; Gong, Feijun; Wong, Rong; Liang, Chen; Zhang, Yurong; Yu, Yunqiu


    A novel capillary zone electrophoresis separation coupled to electro spray ionization time-of-flight mass spectrometry method was developed for the simultaneous analysis of six toxic alkaloids: brucine, strychnine, atropine sulfate, anisodamine hydrobromide, scopolamine hydrobromide and anisodine hydrobromide in human plasma and urine. To obtain optimal sensitivity, a solid-phase extraction method using Oasis MCX cartridges (1 mL, 30 mg; Waters, USA) for the pretreatment of samples was used. All compounds were separated by capillary zone electrophoresis at 25 kV within 12 min in an uncoated fused-silica capillary of 75 μm id × 100 cm and were detected by time-of-flight mass spectrometry. This method was validated with regard to precision, accuracy, sensitivity, linear range, limit of detection (LOD), and limit of quantification (LOQ). In the plasma and urine samples, the linear calibration curves were obtained over the range of 0.50-100 ng/mL. The LOD and LOQ were 0.2-0.5 ng/mL and 0.5-1.0 ng/mL, respectively. The intra- and interday precision was better than 12% and 13%, respectively. Electrophoretic peaks could be identified by mass analysis.

  18. On-line immunoaffinity solid-phase extraction capillary electrophoresis mass spectrometry for the analysis of large biomolecules: a preliminary report. (United States)

    Medina-Casanellas, Silvia; Benavente, Fernando; Giménez, Estela; Barbosa, José; Sanz-Nebot, Victoria


    The analysis of large biomolecules by on-line immunoaffinity solid-phase extraction capillary electrophoresis mass spectrometry (IA-SPE-CE-MS) remains unexplored because of the complex issues that need to be addressed. In this preliminary study, we used the human glycoprotein transferrin (Tf) as a model of a large biomolecule. First, we established by CE-UV a novel method compatible with IA-SPE-CE-MS, based on the use of a fused silica capillary coated with an anionic derivative of polyacrylamide (UltraTrol(TM) Dynamic Pre-Coat High Normal, HN) to prevent protein adsorption. The methodology allowed the detection of the most abundant Tf sialoforms. Repeatability studies demonstrated high stability of the coated capillaries, which was required for on-line immunoextraction and MS detection. IA-SPE-CE-UV and IA-SPE-CE-MS methods were optimized for the analysis of Tf standards and human serum samples using a laboratory-made IA sorbent. Three peaks corresponding to Tf were detected with UV detection when on-line immunoextraction was applied to the standards. The use of MS detection, however, reduced the resolution of the electrophoretic separation. Finally, we demonstrated that it was possible to detect Tf in human serum samples, after off-line serum sample de-salting by centrifugal filtration.

  19. Capillary Electrophoresis for the Simultaneous Determination of Metals by Using Ethylenediamine Tetraacetic Acid as Complexing Agent and Vancomycin as Complex Selector

    Institute of Scientific and Technical Information of China (English)

    THREEPROM, Jirasak; SOM-AUM, Waraporn; LIN, Jin-Ming


    A new separation system of capillary electrophoresis for the simultaneous determination of metals by using ethylenediamine tetraacetic acid (EDTA) as complexing agent and employing vancomycin as complex selector was described. The Z-shape cell capillary electrophoresis was used to enhance the sensitivity for the determination of the complexes of Cu(Ⅱ), Ni(Ⅱ), Co(Ⅱ) and Fe(Ⅲ) with EDTA. The partial filling method (co-current mode) was used in order to increase the selectivity of the electrophoretic method, meanwhile vancomycin was not present at the detector path during the detection of metal-EDTA complexes. The vancomycin concentration, phosphate concentration and pH of the buffer strongly influenced mobility, resolution and selectivity of the studied analytes. Under the optimal condition, the relative standard deviations (n=5) of the migration time and the peak area were less than 3.14% and 7.35%, respectively. Application of the Z-shape cell capillary electrophoresis method with UV detection and vancomycin loading led to the reliable determination of these metal ions in tap water and the recoveries were 97%-101%. The detection limits based on a signal to noise ratio of 3: 1 were found in the range of 2-10 μg·L-1.

  20. Kinetic performance evaluation and perspectives of contemporary packed column capillary electrochromatography. (United States)

    De Smet, Seppe; Lynen, Frederic


    Capillary electrochromatography (CEC) is in essence a highly efficient and fast separation technique but practical constraints limit the current performance, robustness and routine implementation of the technique. In this work the kinetic performance limit (KPL) curve was used to evaluate commercial packed column CEC; this firstly in order to assess the broader applicability of the kinetic plot approach in electrodriven chromatographic techniques, and secondly to allow a more general unbiased comparison with HPLC performance. Evaluations were performed with a mixture of well retained and electrophoretically neutral phenones, to allow the observation of only chromatographic processes. Initial CEC retention time irreproducibility issues were solved by applying high acetonitrile content (80%) in the mobile phase, and solute retention was increased by increasing the phenone chain length. Comparison was performed with HPLC, with a column packed with an identical stationary phase to allow measurement of the performance under optimal conditions, and not with μ-LC on the CEC column as extra column peak broadening phenomena would thereby negatively affect the μ-LC performance. This comparison demonstrated that current HPLC performance largely outcompetes what is achievable with contemporary packed column CEC. Interestingly, significantly improved CEC performance could be obtained at lower temperatures (10°C) indicating a persistent degree of joule heating phenomena taking place in the contemporary packed column (100μm) CEC approach. Effective suppression of the latter opens possibilities for increasing the applicable voltage and outperforming HPLC and UHPLC.

  1. Analysis of impurities in crude and highly-purified terephthalic acid by capillary electrophoresis

    Directory of Open Access Journals (Sweden)

    Moraes Maria de Lourdes L.


    Full Text Available In this work, a simple and fast capillary electrophoresis method for the simultaneous analysis of 4-carboxybenzaldehyde (4-CBA, p-toluic acid (pTOL and benzoic acid (BZ in industrial batches of crude (CTA and highly-purified (PTA terephthalic acid was developed. The electrophoretic conditions comprise: 20 mmol L-1 tetraborate buffer at pH 9, hydrodynamic injection (5 s/17 kPa, applied voltage of +30 kV and direct UV detection at 200 nm. The concentrations of 4-CBA and pTOL in five batches of CTA and four batches of PTA as determined by the proposed CE methodology were in agreement with the results from gas chromatography and polarography methods in current use in Tereftalatos Mexicanos S.A. (TEMEX. Levels of BZ were determined only by the CE methodology and ranged from 60 - 300 ppm in CTA and 5 - 7 ppm in PTA. Several impurities deriving from the incomplete oxidation of p-xylene were investigated. So far the positive identification of 4-hydroxymethylbenzoic acid was accomplished by comparison with pure standards.

  2. High-speed DNA genotyping using microfabricated capillary array electrophoresis chips

    Energy Technology Data Exchange (ETDEWEB)

    Woolley, A.T.; Sensabaugh, G.F.; Mathies, R.A. [Univ. of California, Berkeley, CA (United States)


    Capillary array electrophoresis (CAE) chips have been designed and fabricated with the capacity to rapidly (<160 s) analyze 12 different samples in parallel. Detection of all lanes with 0.3 s temporal resolution was achieved using a laser-excited confocal-fluorescence scanner. The operation and capabilities of these CAE microdevices were first determined by performing electrophoretic separations of pBR322 MspI DNA samples. Genotyping of HLA-H, a candidate gene for the diagnosis of hereditary hemochromatosis, was then performed to demonstrate the rapid analysis of biologically relevant samples. Two-color multiplex fluorescence detection of HLA-H genotypes was accomplished by prelabeling the standard pBR322 MspI DNA ladder with a red emitting bisintercalation dye (butyl TOTIN) and on-column labeling of the HLA-H DNA with thiazole orange. This work establishes the feasibility of using CAE chips for high-speed, high-throughput genotyping. 44 refs., 7 figs.

  3. Nonionic surfactant enhanced semipermanent coatings for capillary electrophoresis of inorganic anions without use of organic additives. (United States)

    Yao, Lihua; Liu, Qian; Li, Yi; Yao, Shouzhuo


    Separation of inorganic anions by capillary electrophoresis (CE) is usually conducted in co-electroosmotic mode due to the large electrophoretic mobilities of inorganic anions. Semipermanent surfactant coatings have been shown to be effective for CE of inorganic anions due to their strong capability of electroosmotic flow (EOF) manipulation. However, semipermanent coatings often suffer from their unsatisfactory stability. In addition, organic solvent additives are usually required to adjust the selectivity, which also aggravate the degradation of coating. In this work, a novel semipermanent coating consisting of cationic Gemini surfactant 18-10-18 and nonionic surfactant Tween 20 was developed to separate inorganic anions in CE. This coating is easy to prepare and more stable than pure Gemini coating. The introduction of nonionic surfactant in the coating not only suppresses the reversed EOF but can also adjust the selectivity of separation. Good separations of six model anions were achieved, the separation efficiency was as high as 65040-169700 plates/m and the RSDs of the migration times were less than 0.5 and 2.5% for run-to-run and day-to-day assays, respectively. Calibration curves were linear in the range of 0.05-5.0 mM; the detection limits ranged from 20 to 50 μM. More importantly, no organic solvents are required in the background buffer to achieve the satisfactory separations. This guarantees the coating stability and makes the method greener than most of other methods for CE of inorganic anions.

  4. Capillary electrophoresis to determine entrapment efficiency of a nanostructured lipid carrier loaded with piroxicam

    Institute of Scientific and Technical Information of China (English)

    Jessica Otarola; Adriana Guillermina Lista; Beatriz Fernández Band; Mariano Garrido


    A simple and fast capillary electrophoresis method has been developed to determine the amount of piroxicam loaded in a drug delivery system based on nanostructured lipid carriers (NLCs). The entrapment efficiency of the nanostructured lipid carrier was estimated by measuring the concentration of drug not entrapped in a suspension of NLC. The influence of different parameters on migration times, peak symmetry, efficiency and resolution was studied; these parameters included the pH of the electrophoretic buffer solution and the applied voltage. The piroxicam peak was obtained with a satisfactory resolution. The separation was carried out using a running buffer composed of 50 mM ammonium acetate and 13.75 mM ammonia at pH 9. The optimal voltage was 20 kV and the cartridge temperature was 20 1C. The corresponding calibration curve was linear over the range of 2.7–5.4 mg/mL of NLC suspension. The reproducibility of migration time and peak area were investigated, and the obtained RSD% values (n ¼ 5) were 0.99 and 2.13, respectively.

  5. Capillary electrophoresis to determine entrapment efficiency of a nanostructured lipid carrier loaded with piroxicam

    Directory of Open Access Journals (Sweden)

    Jessica Otarola


    Full Text Available A simple and fast capillary electrophoresis method has been developed to determine the amount of piroxicam loaded in a drug delivery system based on nanostructured lipid carriers (NLCs. The entrapment efficiency of the nanostructured lipid carrier was estimated by measuring the concentration of drug not entrapped in a suspension of NLC. The influence of different parameters on migration times, peak symmetry, efficiency and resolution was studied; these parameters included the pH of the electrophoretic buffer solution and the applied voltage. The piroxicam peak was obtained with a satisfactory resolution. The separation was carried out using a running buffer composed of 50 mM ammonium acetate and 13.75 mM ammonia at pH 9. The optimal voltage was 20 kV and the cartridge temperature was 20 °C. The corresponding calibration curve was linear over the range of 2.7–5.4 µg/mL of NLC suspension. The reproducibility of migration time and peak area were investigated, and the obtained RSD% values (n=5 were 0.99 and 2.13, respectively.

  6. Chemometrics optimization of six antihistamines separations by capillary electrophoresis with electrochemiluminescence detection. (United States)

    Zhu, Derong; Li, Xia; Sun, Jinying; You, Tianyan


    This work expanded the knowledge of the use of chemometric experimental design in optimizing of six antihistamines separations by capillary electrophoresis with electrochemiluminescence detection. Specially, central composite design was employed for optimizing the three critical electrophoretic variables (Tris-H(3)PO(4) buffer concentration, buffer pH value and separation voltage) using the chromatography resolution statistic function (CRS function) as the response variable. The optimum conditions were established from empirical model: 24.2mM Tris-H(3)PO(4) buffer (pH 2.7) with separation voltage of 15.9 kV. Applying theses conditions, the six antihistamines (carbinoxamine, chlorpheniramine, cyproheptadine, doxylamine, diphenhydramine and ephedrine) could be simultaneous separated in less than 22 min. Our results indicate that the chemometrics optimization method can greatly simplify the optimization procedure for multi-component analysis. The proposed method was also validated for linearity, repeatability and sensitivity, and was successfully applied to determine these antihistamine drugs in urine.

  7. [Determination of amino acids in honey by capillary electrophoresis with indirect ultraviolet detection]. (United States)

    Zhou, Xianjing; Shi, Yanping


    A method of capillary electrophoresis with indirect ultraviolet (UV) detection was developed for the separation and determination of nine amino acids such as lysine, tryptophan, glutamic acid, etc. The effects of sodium dihydrogen phosphates concentration, pH of buffer and sample injection type and time on the reproducibility and efficiency were investigated. The optimum injection time was 5 s at 5 kPa. The optimum electrophoretic conditions were as follow: 10 mmol/L sodium dihydrogen phosphates (pH 10. 2) containing 0. 5 mmol/L cetrimonium bromide, 20 mmol/L nicotinic acid and 10% (v/v) methanol as running buffer, applied voltage of - 15 kV, detection wavelength of 220 nm. The base line separation of the nine amino acids was achieved successfully within 11 min. The lowest detection limit was 0. 3 mg/L. All of the nine analytes showed good linearities within 1. 0 - 1000 mg/L. The relative standard deviations of migration time and peak area were 0. 64% - 5. 83%. The recoveries of the eight amino acids spiked in a real sample were between 60. 00% and 118.37%. The method was applied in the determination of the amino acids in honey samples from different nectar plants and origins. Prolin, serine and aspartic acid were found in five honey samples, and tryptophan was only found in a litchi honey sample. This method can provide good reference to the evaluation of the quality and nectar origin of honey.

  8. Integrating Internal Standards into Disposable Capillary Electrophoresis Devices To Improve Quantification (United States)


    To improve point-of-care quantification using microchip capillary electrophoresis (MCE), the chip-to-chip variabilities inherent in disposable, single-use devices must be addressed. This work proposes to integrate an internal standard (ISTD) into the microchip by adding it to the background electrolyte (BGE) instead of the sample—thus eliminating the need for additional sample manipulation, microchip redesigns, and/or system expansions required for traditional ISTD usage. Cs and Li ions were added as integrated ISTDs to the BGE, and their effects on the reproducibility of Na quantification were explored. Results were then compared to the conclusions of our previous publication which used Cs and Li as traditional ISTDs. The in-house fabricated microchips, electrophoretic protocols, and solution matrixes were kept constant, allowing the proposed method to be reliably compared to the traditional method. Using the integrated ISTDs, both Cs and Li improved the Na peak area reproducibility approximately 2-fold, to final RSD values of 2.2–4.7% (n = 900). In contrast (to previous work), Cs as a traditional ISTD resulted in final RSDs of 2.5–8.8%, while the traditional Li ISTD performed poorly with RSDs of 6.3–14.2%. These findings suggest integrated ISTDs are a viable method to improve the precision of disposable MCE devices—giving matched or superior results to the traditional method in this study while neither increasing system cost nor complexity. PMID:28192985

  9. Electrophoretic Deposition of Carbon Nanotubes on 3-Amino-Propyl-Triethoxysilane (APTES Surface Functionalized Silicon Substrates

    Directory of Open Access Journals (Sweden)

    Theda Daniels-Race


    Full Text Available Fabrication of uniform thin coatings of multi-walled carbon nanotubes (MWCNTs by electrophoretic deposition (EPD on semiconductor (silicon substrates with 3-aminopropyl-triethoxysilane (APTES surface functionalization has been studied extensively in this report. The gradual deposition and eventual film formation of the carbon nanotubes (CNTs is greatly assisted by the Coulombic force of attraction existing between the positively charged –NH2 surface groups of APTES and the acid treated, negatively charged nanotubes migrating towards the deposition surfaces. The remarkable deposition characteristics of the CNT coatings by EPD in comparison to the dip coating method and the influence of isopropyl (IPA-based CNT suspension in the fabricated film quality has also been revealed in this study. The effect of varying APTES concentration (5%–100% on the Raman spectroscopy and thickness of the deposited CNT film has been discussed in details, as well. The deposition approach has eliminated the need of metal deposition in the electrophoretic deposition approach and, therefore, establishes a cost-effective, fast and entirely room temperature-based fabrication strategy of CNT thin films for a wide range of next generation electronic applications.

  10. Preparation and characterization of TiO 2-cationic hybrid nanoparticles as electrophoretic particles (United States)

    Li, Jingjing; Deng, Liandong; Xing, Jinfeng; Dong, Anjie; Li, Xianggao


    The hybrid nanoparticles (TiO2-HNPs) with TiO2 nanoparticles as core and with poly(N,N-dimethylaminoethyl methacrylate-co-methyl methacrylate) by using triallylamine as cross-linking agent as shell were firstly prepared via atom transfer radical polymerization (ATRP) in methanol. Then the hybrid nanoparticles with positive charge were produced by the quaternization with methyl iodide as quaternization reagent so as to endow them with greater electrophoretic mobility. The cationic hybrid nanoparticles (TiO2-CHNPs) were studied by means of transmission electron microscopy (TEM), scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy and dynamic light scattering (DLS) measurements. The results indicate that the cationic polymer is successfully grafted on the surface of the TiO2 nanoparticles. The particle size of TiO2-CHNPs is about 150 nm and the polydispersity index (PDI) is 0.307. The zeta potential, the contrast ratio of white state to dark state and response time of TiO2-CHNPs are +16.8 mV, 30 and 3 s, respectively, which show the potential application prospect in the development of electrophoretic ink.

  11. Electrophoretic Ink Display Prepared by Jelly Fig Pectin/Gelatin Microspheres

    Directory of Open Access Journals (Sweden)

    Wing-Ming Chou


    Full Text Available A brand new Bio-Electronic ink (Bio-E ink display device was prepared and characterized in this study. Semiconductor material, copper phthalocyanine (CuPc was modified by cationic surfactants, cetylpyridinium chloride (CPC, as the core material, and the shell of capsule was prepared by jelly fig pectin, gelatin and sodium dodecyl sulphate (SDS. Here, jelly fig pectin was provided as the shell material for the first time. Chemical structure of the modified CuPc was characterized by Fourier Transform Infrared Spectrometer (FTIR. The core-shell microcapsules were achieved by coacervation method in an oil/water (O/W emulsion system. The particle size and morphology of microcapsules were affected by the concentrations of SDS and pH values of the O/W emulsion system. A new microcapsule-based electrophoretic display device was presented. Its image display ability of the microcapsules electrophoretic device was presented as appropriated electric power was applied, and the response time was 0.06 sec under 0.1 V/mm of electric field. Moreover, we found that its image contrast ratio of display device was influenced by the particle sizes of the microcapsules.

  12. Electrophoretic deposition of silica-hyaluronic acid and titania-hyaluronic acid nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Ma, R. [Department of Materials Science and Engineering, McMaster University, 1280 Main Street West, Hamilton, Ontario, L8S 4L7 (Canada); Zhitomirsky, I., E-mail: [Department of Materials Science and Engineering, McMaster University, 1280 Main Street West, Hamilton, Ontario, L8S 4L7 (Canada)


    Research highlights: > The kinetics of electrodeposition of hyaluronic acid has been studied using quartz crystal microbalance. > Composite films containing silica and titania were prepared by electrophoretic deposition. > The deposition yield and deposit composition can be varied by variation of deposition time, voltage and bath composition. > We concluded that the method offers the advantages of room temperature processing for the fabrication of composite materials for biomedical applications. - Abstract: Thin films of hyaluronic acid were prepared by anodic electrophoretic deposition (EPD) and the deposition kinetics was studied using quartz crystal microbalance. EPD method has been developed for the fabrication of new ceramic-biopolymer nanocomposites containing silica and titania nanoparticles in the matrix of hyaluronic acid. The deposit thickness was varied in the range of 0-10 {mu}m. The composition of the deposits can be varied by the variation of silica and titania concentration in the suspensions. The deposits were studied by thermogravimetric analysis, differential thermal analysis, Fourier transform infrared spectroscopy, X-ray diffraction analysis, and scanning electron microscopy. The method offers the advantages of room temperature processing of nanocomposite materials for biomedical applications.

  13. Electrophoretic deposition of composite halloysite nanotube–hydroxyapatite–hyaluronic acid films

    Energy Technology Data Exchange (ETDEWEB)

    Deen, I. [Department of Materials Science and Engineering, McMaster University, 1280 Main Street West, Hamilton, Ontario, Canada L8S 4L7 (Canada); Zhitomirsky, I., E-mail: [Department of Materials Science and Engineering, McMaster University, 1280 Main Street West, Hamilton, Ontario, Canada L8S 4L7 (Canada)


    Highlights: ► Composite halloysite nanotubes–hydroxyapatite–hyaluronic acid films were prepared. ► Electrophoretic deposition method was used for deposition. ► Natural hyaluronic acid was used as a dispersing, charging and film forming agent. ► Film composition and deposition yield can be varied. ► The films can be used for biomedical implants with controlled release of drugs. -- Abstract: Electrophoretic deposition method has been developed for the deposition of biocomposite films containing halloysite nanotubes (HNTs), hydroxyapatite (HA) and hyaluronic acid. The method is based on the use of natural hyaluronate biopolymer as a dispersing and charging agent for HNT and HA and film forming agent for the fabrication of the composite films. The deposition kinetics was studied by the quartz crystal microbalance method. The composite films were studied by X-ray diffraction, thermogravimetric analysis, differential thermal analysis and electron microscopy. The composite films are promising materials for the fabrication of biomedical implants with advanced functional properties.

  14. Quantum dot sensitized solar cells with improved efficiency prepared using electrophoretic deposition. (United States)

    Salant, Asaf; Shalom, Menny; Hod, Idan; Faust, Adam; Zaban, Arie; Banin, Uri


    Quantum dot sensitized solar cells (QDSSC) may benefit from the ability to tune the quantum dot optical properties and band gap through the manipulation of their size and composition. Moreover, the inorganic nanocrystals may provide increased stability compared to organic sensitizers. We report the facile fabrication of QDSSC by electrophoretic deposition of CdSe QDs onto conducting electrodes coated with mesoporous TiO(2). Unlike prior chemical linker-based methods, no pretreatment of the TiO(2) was needed, and deposition times as short as 2 h were sufficient for effective coating. Cross-sectional chemical analysis shows that the Cd content is nearly constant across the entire TiO(2) layer. The dependence of the deposition on size was studied and successfully applied to CdSe dots with diameters between 2.5 and 5.5 nm as well as larger CdSe quantum rods. The photovoltaic characteristics of the devices are greatly improved compared with those achieved for cells prepared with a linker approach, reaching efficiencies as high as 1.7%, under 1 sun illumination conditions, after treating the coated electrodes with ZnS. Notably, the absorbed photon to electron conversion efficiencies did not show a clear size-dependence indicating efficient electron injection even for the larger QD sizes. The electrophoretic deposition method can be easily expanded and applied for preparations of QDSSCs using diverse colloidal quantum dot and quantum rod materials for sensitization.

  15. Roll-to-roll light directed electrophoretic deposition system and method

    Energy Technology Data Exchange (ETDEWEB)

    Pascall, Andrew J.; Kuntz, Joshua


    A roll-to-roll light directed electrophoretic deposition system and method advances a roll of a flexible electrode web substrate along a roll-to-roll process path, where a material source is positioned to provide on the flexible electrode web substrate a thin film colloidal dispersion of electrically charged colloidal material dispersed in a fluid. A counter electrode is also positioned to come in contact with the thin film colloidal dispersion opposite the flexible electrode web substrate, where one of the counter electrode and the flexible electrode web substrate is a photoconductive electrode. A voltage source is connected to produce an electric potential between the counter electrode and the flexible electrode web substrate to induce electrophoretic deposition on the flexible electrode web substrate when the photoconductive electrode is rendered conductive, and a patterned light source is arranged to illuminate the photoconductive electrode with a light pattern and render conductive illuminated areas of the photoconductive electrode so that a patterned deposit of the electrically charged colloidal material is formed on the flexible electrode web substrate.

  16. Preparation of platinum-free tubular dye-sensitized solar cells by electrophoretic deposition

    Directory of Open Access Journals (Sweden)

    Khwanchit Wongcharee


    Full Text Available Tubular dye-sensitized solar cells (DSSCs were developed by replacing expensive materials with lower cost materials as follows: (1 replacing conductive glass electrodes with titanium (Ti wires and (2 replacing platinum (Pt catalyst with the mixture of multi-walled carbon nanotubes, MWCNTs and Poly(3,4-ethylenedioxythiophene-poly(styrenesulfonate, PEDOT-PSS. Platinized counter electrodes were used as the standard counter electrodes for comparison. The effects of the chemical treatment of titanium wire substrate and electrophoretic deposition condition on the efficiency of DSSCs were also investigated. The chemical treatment of titanium wires was carried out by soaking the wires in HF-HNO3 solutions at three different concentrations of 0.8, 1.6 and 2.4 M and three different soaking durations of 5, 10 and 15 min. The optimum condition was found at HF-HNO3 concentration of 0.8 M and soaking duration of 10 min. Film coating on working electrodes was performed using electrophoretic technique at three different voltages of 5, 8 and 10 V and four different coating durations of 1, 3, 5 and 7 min. Then, the optimum condition at deposition voltage of 5 V and deposition duration of 5 min was applied for film deposition on counter electrodes. The efficiency of DSSC with CNTs/TiO2 counter electrode was 0.03%. The addition of PEDOT-PSS improved the efficiency of DSSC to 0.08%.

  17. Nano-structured yttria-stabilized zirconia coating by electrophoretic deposition

    Energy Technology Data Exchange (ETDEWEB)

    Maleki-Ghaleh, H., E-mail: [Faculty of Materials Engineering, Sahand University of Technology, Tabriz (Iran, Islamic Republic of); Rekabeslami, M. [Faculty of Mechanical Engineering, Materials Science and Engineering Division, K. N. Toosi University of Technology, Tehran (Iran, Islamic Republic of); Shakeri, M.S. [Materials and Energy Research Center, Karaj (Iran, Islamic Republic of); Siadati, M.H. [Faculty of Mechanical Engineering, Materials Science and Engineering Division, K. N. Toosi University of Technology, Tehran (Iran, Islamic Republic of); Javidi, M. [Department of Materials Science and Engineering, School of Engineering, Shiraz University, Shiraz (Iran, Islamic Republic of); Talebian, S.H. [Faculty of Petroleum Engineering, Universiti Technologi Petronas, Perak (Malaysia); Aghajani, H. [Department of Materials Engineering, University of Tabriz, Tabriz (Iran, Islamic Republic of)


    The most important role of thermal barrier coatings is to reduce the temperature of the substrate in high temperature applications. Nanoparticle zirconia might be a suitable choice for improving the efficiency of thermal barrier coatings. Nanostructured coatings have lower thermal conduction, higher thermal expansion and lower dimensional variations at higher temperatures in comparison with the microstructured coatings. Electrophoretic deposition has been preferred for thermal barrier coatings due to its simplicity, controllability and low cost. In the present study, three different suspensions of ZrO{sub 2}–8 wt%Y{sub 2}O{sub 3} (40 nm) made with ethanol, acetone and acetyl acetone were used. Electrophoretic deposition was conducted at a fixed voltage of 60 V for 120 s on aluminized Inconel 738-LC, and then heat treated at 1100{sup o}C for 4 h in air atmosphere. The coating morphology and elemental distribution were studied using scanning electron microscopy. It was observed that suspension media have an important effect on the quality of the final product. Acetyl acetone showed better dispersion of particles than the other two media. Consequently, deposition from acetyl acetone resulted in uniform and crack-free layers while those from ethanol and acetone were completely non-uniform due to agglomeration and low viscosity, respectively.

  18. Physical investigation of electrophoretically deposited graphene oxide and reduced graphene oxide thin films (United States)

    Politano, Grazia Giuseppina; Versace, Carlo; Vena, Carlo; Castriota, Marco; Ciuchi, Federica; Fasanella, Angela; Desiderio, Giovanni; Cazzanelli, Enzo


    Graphene oxide and reduced graphene oxide thin films are very promising materials because they can be used in optoelectronic devices and in a growing range of applications such as touch screens and flexible displays. In this work, graphene oxide (GO) and thermally reduced graphene oxide (rGO) thin films, deposited on Ti/glass substrates, have been obtained by electrophoretic deposition. The morphological and the structural properties of the samples have been investigated by micro-Raman technique, X-ray reflectometry, and SEM analysis. In order to study the optical and electrical properties, variable angle spectroscopic ellipsometry and impedance analysis have been performed. The thermal annealing changes strongly the structural, electrical, and optical properties, because during the thermal processes some amount of sp3 bonds originally present in GO were removed. In particular, the annealing enhances the Ohmic behavior of the rGO film increasing its conductivity and the estimated optical density. Moreover, using electrophoretic deposition, we have found a higher value of optical density for GO thin films, not observed in GO films obtained with other deposition methods.

  19. An electrophoretic profiling method for thiol-rich phytochelatins and metallothioneins. (United States)

    Fan, Teresa W M; Lane, Andrew N; Higashi, Richard M


    Thiol-rich peptides such as phytochelatins (PCs) and metallothioneins (MTs) are important cellular chelating agents which function in metal detoxification and/or homeostasis. The variations in molecular sizes and lack of chromophores of these peptides make their analysis difficult. This paper reports an electrophoresis-based method for a broad screen of thiol-rich peptides and proteins. The method uses the thiol-selective fluorescent tag, monobromobimane, coupled with Tricine--sodium dodecyl sulphate--urea polyacrylamide gel electrophoresis for a sensitive determination of both PCs and MTs. Results for PCs were confirmed by two-dimensional NMR and HPLC-tandem MS analyses. Sample throughput is substantially improved over chromatography-based methods through parallel sample analysis in 1 h of electrophoretic separation. The method is versatile in that peptides ranging from glutathione to large proteins can be analysed by simple modification(s) of the extraction and electrophoretic conditions, and the nature of the method supports serendipitous detection of unexpected or novel thiol metabolites.

  20. Electrophoretic study of newly synthesized RNA during oral regeneration of the heterotrichous ciliate protozoan Stentor coeruleus

    Energy Technology Data Exchange (ETDEWEB)

    Bohatier, J.; Bernard, F. (Centre National de la Recherche Scientifique, 63 - Aubiere (France). Departement de Zoologie et Protistoligie); Amalric, F. (Centre de Recherche de Biochemie et de Genetique Cellulaires, Toulouse (France))


    An electrophoretic study was made of RNA newly formed during two periods of preferential /sup 3/H-uridine uptake in Stentor undergoing traumatic regeneration of oral apparatus. Three main categories of RNA were detected during both periods: ribosomal RNAs 18S and 28S, low molecular weight RNAs 4-6S and polydispersed RNAs 7S-22S. Among the latter, an RNA 7-8S was detected in large amounts during both periods, and an RNA 16-18S appeared in the second period. This last RNA was also found in total RNA for the whole regeneration cycle (8 h) and in total RNA from dividing intact cells (16 h). The percentage of oligo(dT)-cellulose-bound RNA, always low, was highest at early stages. Electrophoretic analysis showed that most of the new species were poly A/sup -/. Although poly A/sup +/RNAs are preferentially synthesized at the beginning of morphogenesis, the existence of poly A/sup -/ messengers in Stentor cannot be excluded.