WorldWideScience

Sample records for capability arac response

  1. Exploring ARAC Support of U.S. Coast Guard Planning and Response Capability

    Energy Technology Data Exchange (ETDEWEB)

    Baker, M.S.; Baskett, R.; Ellis, J. S.

    2001-07-01

    The U.S. Coast Guard is responsible for the protection of the marine environment from spills of oil and hazardous material. The USCG responsibilities include responding to oil and chemical spills from ships as well as from sources ashore. While responding to a spill, The USCG Marine Safety Offices and Detachments, and the National Strike Force (NSF) depend on interagency support from the Environmental Protection Agency (EPA), National Oceanic and Atmospheric Administration (NOAA), and state and local agencies. Currently, the USCG depends on NOAA Scientific Support Coordinators for predicting and assessing atmospheric releases of hazardous material. NOAA has several computer models that the Coast Guard can access in the event of a chemical release into the atmosphere or an in situ oil burn. However, the Department of Energy operates a more powerful modeling system called the Atmospheric Release Advisory Capability (ARAC). Located at the Lawrence Livermore National Laboratory in Livermore, California, ARAC offers a complex multiscale model in a system that is simple for the end user to operate. The applicability of ARAC to Coast Guard operations is the subject of this study.

  2. Utilization of the atmospheric release advisory capability (ARAC) services during and after the Three Mile Island accident

    Energy Technology Data Exchange (ETDEWEB)

    Knox, J.B.; Dickerson, M.H.; Greenly, G.D.; Gudiksen, P.H.; Sullivan, T.J.

    1980-07-01

    At 0820 PST on 28 March 1979, the Department of Energy's Emergency Operations Center advised the Atmospheric Release Advisory Capability (ARAC) that the Three Mile Island nuclear power plant in Harrisburg, Pennsylvania, had experienced an accident some four hours earlier, resulting in the atmospheric release of xenon-133 and krypton-88. This report describes ARAC's response to the Three Mile Island accident, including the role ARAC played throughout the 20 days that real-time assessments were made available to the Department of Energy on-scene commander. It also describes the follow-up population-dose calculations performed for the President's Commission on Three Mile Island. At the request of the Nuclear Regulatory Commission, a questionnaire addressing the usefulness of ARAC products during the accident was sent to ARAC-product users. A summary of the findings from this questionnaire, along with recommendations for improving ARAC service, is also presented. The accident at Mississauga, Ontario, Canada, is discussed in the context of a well-planned emergency response by local and Federal officials.

  3. Expansion of ARAC for chemical releases

    Energy Technology Data Exchange (ETDEWEB)

    Baskett, R.L.; Blair, M.D.; Foster, C.S.; Taylor, A.G.

    1997-07-01

    In 1996 the Atmospheric Release Advisory Capability (ARAC) at Lawrence Livermore National Laboratory (LLNL) completed an effort to expand its national emergency response modeling system for chemical releases. Key components of the new capability include the integration of (1) an extensive chemical property database, (2) source modeling for tanks and evaporating pools, (3) denser-than-air dispersion, (4) public exposure guidelines, and (5) an interactive graphical user interface (GUI). Recent use and the future of the new capability are also discussed.

  4. Study of applying the Atmospheric Release Advisory Capability to nuclear power plants. [Use of ARAC to forecast hazards of accidental release of radionuclides to the atmosphere

    Energy Technology Data Exchange (ETDEWEB)

    Orphan, R.C.

    1978-06-01

    Each utility licensee for a nuclear power reactor is required to minimize the adverse effects from an accidental radionuclide release into the atmosphere. In the past the ability to forecast quantitatively the extent of the hazard from such a release has been limited. Now powerful atmospheric modeling techniques are available to assist nuclear reactor site officials with greatly improved assessments. Lawrence Livermore Laboratory (LLL) has developed a prototype system called the Atmospheric Release Advisory Capability (ARAC) which is designed to integrate the modeling with advanced sensors, data handling techniques, and weather data in order to provide timely, usable advisories to the site officials. The purpose of this project is to examine the ways and means of adapting ARAC for application to many nuclear power reactors widely dispersed across the nation. The project will emphasize the management aspects, including government-industry relationships, technology transfer, organizational structure, staffing, implementing procedures, and costs. Benefits and costs for several alternative systems will be compared. The results will be reviewed and evaluated by the management and staff of the ARAC project at LLL and also by selected staff members of the sponsoring government agency.

  5. Design of an ectoine-responsive AraC mutant and its application in metabolic engineering of ectoine biosynthesis.

    Science.gov (United States)

    Chen, Wei; Zhang, Shan; Jiang, Peixia; Yao, Jun; He, Yongzhi; Chen, Lincai; Gui, Xiwu; Dong, Zhiyang; Tang, Shuang-Yan

    2015-07-01

    Advanced high-throughput screening methods for small molecules may have important applications in the metabolic engineering of the biosynthetic pathways of these molecules. Ectoine is an excellent osmoprotectant that has been widely used in cosmetics. In this study, the Escherichia coli regulatory protein AraC was engineered to recognize ectoine as its non-natural effector and to activate transcription upon ectoine binding. As an endogenous reporter of ectoine, the mutated AraC protein was successfully incorporated into high-throughput screening of ectoine hyper-producing strains. The ectoine biosynthetic cluster from Halomonas elongata was cloned into E. coli. By engineering the rate-limiting enzyme L-2,4-diaminobutyric acid (DABA) aminotransferase (EctB), ectoine production and the specific activity of the EctB mutant were increased. Thus, these results demonstrated the effectiveness of engineering regulatory proteins into sensitive and rapid screening tools for small molecules and highlighted the importance and efficacy of directed evolution strategies applied to the engineering of genetic components for yield improvement in the biosynthesis of small molecules.

  6. NNSA/NV Consequence Management Capabilities for Radiological Emergency Response

    Energy Technology Data Exchange (ETDEWEB)

    D. R. Bowman

    2002-10-01

    The U.S. Department of Energy's National Nuclear Security Administration Nevada Operations Office (NNSA/NV) provides an integrated Consequence Management (CM) response capability for the (NNSA) in the event of a radiological emergency. This encompasses planning, technical operations, and home team support. As the lead organization for CM planning and operations, NNSA/NV coordinates the response of the following assets during the planning and operational phases of a radiological accident or incident: (1) Predictive dispersion modeling through the Atmospheric Release Advisory Capability (ARAC) at Lawrence Livermore National Laboratory (LLNL) and the High Consequence Assessment Group at Sandia National Laboratories (SNL); (2) Regional radiological emergency assistance through the eight Radiological Assistance Program (RAP) regional response centers; (3) Medical advice and assistance through the Radiation Emergency Assistance Center/Training Site (REAC/TS) in Oak Ridge, Tennessee; (4) Aerial radiological mapping using the fixed-wing and rotor-wing aircraft of the Aerial Measuring System (AMS); (5) Consequence Management Planning Teams (CMPT) and Consequence Management Response Teams (CMRT) to provide CM field operations and command and control. Descriptions of the technical capabilities employed during planning and operations are given below for each of the elements comprising the integrated CM capability.

  7. ARAC's radiological support of the Cassini Launch

    Energy Technology Data Exchange (ETDEWEB)

    Baskett, R L; Pace, J C

    1998-10-01

    The Atmospheric Release Advisory Capability (ARAC) program at the Lawrence Livermore National Laboratory (LLNL) was the U.S. Department of Energy atmospheric modeling resource used for the contingency of potential radiological releases during the launch of the Cassini mission. Having the ARAC system up and running was one of the launch criteria during the countdown. The ARAC Center at LLNL forecasted detailed weather conditions and delivered consequence assessments for potential accident scenarios to NASA before and during launch operations. A key aspect of ARAC's support was to acquire a variety of meteorological data for use in both forecast and real-time model calculations. ARAC acquired electronically two types of real-time observed meteorological data: 1) the set of on-site tower and profiler data via the Cape Canaveral Air Station (CCAS) Meteorological Interactive Data Display System (MIDDS), and 2) routine regional airport observations delivered to the ARAC Center from the Air Force Weather Agency. We also used two forecasted data sources: 1) the U.S. Air Force 45th Weather Squadron at CCAS forecasted soundings for launch time, and 2) the Navy Operational Regional Atmospheric Prediction System (NORAPS) prognostic model which ARAC ran over the Cape. The NORAPS runs produced detailed 24-hr forecasts of 3-D wind fields. ARAC used default radiological accident source terms involving the potential destruction of Cassini's Radioisotope Thermoelectric Generators (RTGs) during 3 phases: 1) before the launch, 2) during the first 5 sec after ignition, and 3) from 5 to 143 sec after ignition. ARAC successfully developed and delivered dose and deposition plots at 24 hours, 3 hours, and 30 minutes before each of the launch windows.

  8. ARAC results from phase II of the European tracer experiment

    Energy Technology Data Exchange (ETDEWEB)

    Pace, J.C.; Nasstrom, J.S.

    1997-07-01

    A comparison is provided of the results of calculations by the Atmospheric Release Advisory Capability (ARAC) during two phases of the European Tracer Experiment (ETEX). In phase I of ETEX, participants generated predictions in real time of the concentration of inert tracer gases released from a site in Western France. Each participating group based their predictions on the meteorological data they had available. In phase II, all participants were required to recalculate predictions based on the same meteorological data, which was generated and supplied by the European Centre for Medium- Range Weather Forecasts (ECMWF). ARAC used ECMWF data and also made additional changes to its model configuration,, with the result that ARAC`s accuracy during phase II was much better than for phase I. Experiments described in this paper examine the effect of each of these changes, and show that each change contributed to the improvement.

  9. ARAC dispersion modeling of the August 1998 Tracy, California tire fire

    Energy Technology Data Exchange (ETDEWEB)

    Aluzzi, F J; Baskett, R L; Bowen, B M; Foster, C S; Pace, J C; Pobanz, B; Vogt, P J

    1998-08-28

    At about 4:30 pm PDT on Friday, August 7, 1998 a fire ignited the large tire disposal pit of Royster Tire Co. on Macarthur Drive about 5 km (3 miles) south of downtown Tracy, California. While providing on-scene mutual aid late Friday night, the LLNL Fire Department called and requested that the Atmospheric Release Advisory Capability (ARAC) make a plume forecast for Saturday. The response team in the field was interested in the forecasted location as well as an estimate of potential health effects on the following day. Not having any previous experience with tire fire source terms, ARAC assessors used a constant unit source rate (1 g/s) of particulate and produced plots showing only the location of the ground-level normalized time-integrated air concentrations from the smoke plume. Very early Saturday morning the assessors faxed plots of ground-level smoke air concentrations forecasted for Saturday from 6 am through 6 pm PDT to the Tracy Fire Emergency Operations Center. (As a part of standard procedure, before delivering the plots, the assessors notified ARAC's DOE sponsor.) Fortunately due to the intense heat from the fire, the dense black smoke immediately lofted into the air preventing high ground-level concentrations close to the tire dump. Later on Saturday morning ARAC forecasted a second set of plume integrated air concentrations for Sunday. By Monday the intensity of the fire lessened, and ARAC's support was no longer requested. Following ARAC's response, we made a third calculation on a large scale of the continuous smoke dispersion for 3 days after the fire. A newspaper photograph showed the plume initially rising toward the northeast and the upper part of the smoke cloud turning counterclockwise toward the north. Winds from ARAC's mesoscale prognostic model reproduced this plume structure, while data from the Friday afternoon sounding from Oakland did not. On the 250 km scale, using gridded wind outputs from our mesoscale forecast

  10. ARAC's operational support of the Cassini Launch

    Energy Technology Data Exchange (ETDEWEB)

    Baskett, R L; Pace, J C

    1998-10-01

    The Atmospheric Release Advisory Capability (ARAC) program at the Lawrence Livermore National Laboratory (LLNL) was the U.S. Department of Energy atmospheric modeling resource used for the contingency of potential radiological releases during the launch of the Cassini mission. The ARAC Center at LLNL forecasted detailed weather conditions and delivered consequence assessments for potential accident scenarios to NASA before and during launch operations. A key aspect of ARAC's support was to acquire a variety of meteorological data for use in both forecast and real-time model calculations. ARAC acquired electronically two types of real-time observed meteorological data: 1) the full set of on-site towers and profilers via the Cape Canaveral Air Station (CCAS) Meteorological Interactive Data Display System (MIDDS), and 2) routine regional airport observations (delivered to the ARAC Center from the Air Force Weather Agency). We also used two forecasted data sources: 1) the U.S. Air Force 45th Weather Squadron at CCAS forecasted soundings for launch time, and 2) the Navy Operational Regional Atmospheric Prediction System (NORAPS) prognostic model which ARAC ran over the Cape. The NORAPS runs produced detailed 24-hr forecasts of 3-D wind fields. ARAC used default radiological accident source terms involving the potential destruction of Cassini's Radioisotope Thermoelectric Generators (RTGs) during 3 phases: 1) before the launch, 2) during the first S set after ignition, and 3) from 5 to 143 set after ignition. ARAC successfully developed and delivered dose and deposition plots at 24 hours, 3 hours, and 30 minutes before each of the lau

  11. Solar mechanics thermal response capabilities.

    Energy Technology Data Exchange (ETDEWEB)

    Dobranich, Dean D.

    2009-07-01

    In many applications, the thermal response of structures exposed to solar heat loads is of interest. Solar mechanics governing equations were developed and integrated with the Calore thermal response code via user subroutines to provide this computational simulation capability. Solar heat loads are estimated based on the latitude and day of the year. Vector algebra is used to determine the solar loading on each face of a finite element model based on its orientation relative to the sun as the earth rotates. Atmospheric attenuation is accounted for as the optical path length varies from sunrise to sunset. Both direct and diffuse components of solar flux are calculated. In addition, shadowing of structures by other structures can be accounted for. User subroutines were also developed to provide convective and radiative boundary conditions for the diurnal variations in air temperature and effective sky temperature. These temperature boundary conditions are based on available local weather data and depend on latitude and day of the year, consistent with the solar mechanics formulation. These user subroutines, coupled with the Calore three-dimensional thermal response code, provide a complete package for addressing complex thermal problems involving solar heating. The governing equations are documented in sufficient detail to facilitate implementation into other heat transfer codes. Suggestions for improvements to the approach are offered.

  12. ARAC simulations of the ash plume from the December 1997 eruption of Soufriere Hills Volcano, Montserrat

    Energy Technology Data Exchange (ETDEWEB)

    Ellis, J S; Lefevre, R J; Pace, J C; Vogt, P J; Voight, B

    1998-10-01

    Ash clouds generated by erupting volcanoes represent a serious hazard to military and civil aviation. The dispersion modeling system of the Atmospheric Release Advisory Capability (ARAC) has been used to model the cloud resulting from the eruption of the Soufriere Hills volcano, Montserrat in December 1997. A clone of parts of the ARAC system, now being installed at the Air Force Weather Agency (AFWA), will enable AFWA to provide hazard guidance to military operations in the vicinity of erupting volcanoes. This paper presents ARAC's modeling results and discusses potential application of similar calculations for AFWA support during future events.

  13. 77 FR 56909 - Aviation Rulemaking Advisory Committee (ARAC); Renewal

    Science.gov (United States)

    2012-09-14

    ... Federal Aviation Administration Aviation Rulemaking Advisory Committee (ARAC); Renewal AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of Renewal. SUMMARY: The FAA announces the charter renewal of the Aviation Rulemaking Advisory Committee (ARAC), a Federal Advisory Committee that works with...

  14. 78 FR 63901 - Onsite Emergency Response Capabilities

    Science.gov (United States)

    2013-10-25

    ... Access and Management System (ADAMS): You may access publicly available documents online in the NRC... capabilities. This regulatory basis documents the reasons why the NRC determined rulemaking was the appropriate...). III. Non-Concurrence Several NRC staff members did not agree with some content of the regulatory...

  15. 77 FR 56251 - Aviation Rulemaking Advisory Committee (ARAC); New Task Assignment for the ARAC: Establishment of...

    Science.gov (United States)

    2012-09-12

    ... integrate appropriate elements of aeronautical knowledge and risk management into each Area of Operation in... by ARAC. As part of the procedures, the Working Group must: 1. Recommend a work plan for completion... rating; to develop a detailed proposal to realign FAA training handbooks with the Airman...

  16. 78 FR 68774 - Onsite Emergency Response Capabilities

    Science.gov (United States)

    2013-11-15

    ... AGENCY: Nuclear Regulatory Commission. ACTION: Preliminary proposed rule language. SUMMARY: The U.S. Nuclear Regulatory Commission (NRC) is making available preliminary proposed rule language that would...-0137, ``Prioritization of Recommended Actions to be Taken in Response to Fukushima Lessons Learned...

  17. ARAC Modeling of the Algeciras, Spain Steel Mill CS-137 Release

    Energy Technology Data Exchange (ETDEWEB)

    Vogt, P J; Pobanz, B M; Aluzzi, F J; Baskett, R L; Sullivan, T J

    1999-05-01

    On 12 June 1998, the Atmospheric Release Advisory Capability (ARAC) learned from news reports about the accidental release of cesium-137 from a steel mill near Algeciras, Spain. We used the U.S. Navy Operational Global Atmospheric Prediction System (NOGAPS) gridded data for meteorological input into our diagnostic models. To better resolve near-release location and coastal meteorological conditions, we blended four days of WMO surface and upper air observations with the gridded data. Our calculations showed the plume initially traveled eastward over the Mediterranean Sea, turned northward into central Europe, and was split by the Alps. We determined the timing and amount of cesium released by fitting our modeled air concentrations to the available set of measurements. Accuracy statistics from a small set of ratios of measured to computed air concentrations paired in space and time were similar to those achieved from larger data sets in previous ARAC model evaluation studies on the continental scale.

  18. The value of fludarabine in addition to ARA-C and G-CSF in the treatment of patients with high-risk myelodysplastic syndromes and AML in elderly patients.

    NARCIS (Netherlands)

    Ossenkoppele, G.J.; Graveland, W.J.; Sonneveld, P.; Daenen, S.M.G.J.; Biesma, D.H.; Verdonck, L.F.; Schaafsma, M.R.; Westveer, P.H.; Peters, G.J.; Noordhuis, P.; Muus, P.; Selleslag, D.; Holt, B. van der; Delforge, M.; Lowenberg, B.; Verhoef, G.E.

    2004-01-01

    Fludarabine in addition to cytosine-arabinoside (ARA-C) increases the accumulation of ARA-C-5'-triphosphate (ARA-CTP), which is responsible for the cytotoxic effect in leukemic blasts. In a randomized phase 3 trial, patients with high-risk myelodysplastic syndrome (MDS) (n = 91) or elderly patients

  19. The value of fludarabine in addition to ARA-C and G-CSF in the treatment of patients with high-risk myelodysplastic syndromes and AML in elderly patients

    NARCIS (Netherlands)

    Ossenkoppele, GJ; Graveland, WJ; Sonneveld, P; Daenen, SMGJ; Biesma, DH; Verdonck, LF; Schaafsma, R; Westveer, PHM; Peters, F; Noordhuis, P; Muus, P; van der Holt, R; Delforge, M; Lowenberg, B; Verhoef, GEG

    2004-01-01

    Fludarabine in addition to cytosine-arabinoside (ARA-C) increases the accumulation of ARA-C-5'-triphosphate (ARA-CTP), which is responsible for the cytotoxic effect in leukemic blasts. In a randomized phase 3 trial, patients with high-risk myelodysplastic syndrome (MDS) (n = 91) or elderly patient's

  20. Using genome-wide CRISPR library screening with library resistant DCK to find new sources of Ara-C drug resistance in AML.

    Science.gov (United States)

    Kurata, Morito; Rathe, Susan K; Bailey, Natashay J; Aumann, Natalie K; Jones, Justine M; Veldhuijzen, G Willemijn; Moriarity, Branden S; Largaespada, David A

    2016-11-03

    Acute myeloid leukemia (AML) can display de novo or acquired resistance to cytosine arabinoside (Ara-C), a primary component of induction chemotherapy. To identify genes capable of independently imposing Ara-C resistance, we applied a genome-wide CRISPR library to human U937 cells and exposed to them to Ara-C. Interestingly, all drug resistant clones contained guide RNAs for DCK. To avoid DCK gene modification, gRNA resistant DCK cDNA was created by the introduction of silent mutations. The CRISPR screening was repeated using the gRNA resistant DCK, and loss of SLC29A was identified as also being capable of conveying Ara-C drug resistance. To determine if loss of Dck results in increased sensitivity to other drugs, we conducted a screen of 446 FDA approved drugs using two Dck-defective BXH-2 derived murine AML cell lines and their Ara-C sensitive parental lines. Both cell lines showed an increase in sensitivity to prednisolone. Guide RNA resistant cDNA rescue was a legitimate strategy and multiple DCK or SLC29A deficient human cell clones were established with one clone becoming prednisolone sensitive. Dck-defective leukemic cells may become prednisolone sensitive indicating prednisolone may be an effective adjuvant therapy in some cases of DCK-negative AML.

  1. Using genome-wide CRISPR library screening with library resistant DCK to find new sources of Ara-C drug resistance in AML

    Science.gov (United States)

    Kurata, Morito; Rathe, Susan K.; Bailey, Natashay J.; Aumann, Natalie K.; Jones, Justine M.; Veldhuijzen, G. Willemijn; Moriarity, Branden S.; Largaespada, David A.

    2016-01-01

    Acute myeloid leukemia (AML) can display de novo or acquired resistance to cytosine arabinoside (Ara-C), a primary component of induction chemotherapy. To identify genes capable of independently imposing Ara-C resistance, we applied a genome-wide CRISPR library to human U937 cells and exposed to them to Ara-C. Interestingly, all drug resistant clones contained guide RNAs for DCK. To avoid DCK gene modification, gRNA resistant DCK cDNA was created by the introduction of silent mutations. The CRISPR screening was repeated using the gRNA resistant DCK, and loss of SLC29A was identified as also being capable of conveying Ara-C drug resistance. To determine if loss of Dck results in increased sensitivity to other drugs, we conducted a screen of 446 FDA approved drugs using two Dck-defective BXH-2 derived murine AML cell lines and their Ara-C sensitive parental lines. Both cell lines showed an increase in sensitivity to prednisolone. Guide RNA resistant cDNA rescue was a legitimate strategy and multiple DCK or SLC29A deficient human cell clones were established with one clone becoming prednisolone sensitive. Dck-defective leukemic cells may become prednisolone sensitive indicating prednisolone may be an effective adjuvant therapy in some cases of DCK-negative AML. PMID:27808171

  2. Emergency Response Capability Baseline Needs Assessment - Requirements Document

    Energy Technology Data Exchange (ETDEWEB)

    Sharry, J A

    2016-10-04

    This document was prepared by John A. Sharry, LLNL Fire Marshal and LLNL Division Leader for Fire Protection and reviewed by LLNL Emergency Management Department Head James Colson. The document follows and expands upon the format and contents of the DOE Model Fire Protection Baseline Capabilities Assessment document contained on the DOE Fire Protection Web Site, but only addresses emergency response.

  3. Hospitals Capability in Response to Disasters Considering Surge Capacity Approach

    Directory of Open Access Journals (Sweden)

    Gholamreza Khademipour

    2016-01-01

    Full Text Available Background: The man-made and natural disasters have adverse effects with sound, apparent, and unknown consequences. Among various components of disaster management in health sector, the most important role is performed by health-treatment systems, especially hospitals. Therefore, the present study aimed to evaluate the surge capacity of hospitals of Kerman Province in disaster in 2015. Materials and Methods: This is a quantitative study, conducted on private, military, and medical sciences hospitals of Kerman Province. The sampling method was total count and data collection for the research was done by questionnaire. The first section of the questionnaire included demographic information of the studied hospitals and second part examined the hospital capacity in response to disasters in 4 fields of equipment, physical space, human resources, and applied programs. The extracted data were analyzed by descriptive statistics. Results: The mean capability of implementing the surge capacity programs by hospitals of Kerman Province in disasters and in 4 fields of equipment, physical space, human resources, and applied programs was evaluated as 7.33% (weak. The surge capacity capability of state hospitals in disasters was computed as 8% and compared to private hospitals (6.07% had a more suitable condition. Conclusion: Based on the results of study and significance of preparedness of hospitals in response to disasters, it is proposed that managers of studied hospitals take measures to promote the hospital response capacity to disasters based on 4 components of increasing hospital capacity.

  4. Emergency Response Capability Baseline Needs Assessment Compliance Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Sharry, John A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2013-09-16

    This document is the second of a two-part analysis of Emergency Response Capabilities of Lawrence Livermore National Laboratory. The first part, 2013 Baseline Needs Assessment Requirements Document established the minimum performance criteria necessary to meet mandatory requirements. This second part analyses the performance of Lawrence Livermore Laboratory Emergency Management Department to the contents of the Requirements Document. The document was prepared based on an extensive review of information contained in the 2009 BNA, the 2012 BNA document, a review of Emergency Planning Hazards Assessments, a review of building construction, occupancy, fire protection features, dispatch records, LLNL alarm system records, fire department training records, and fire department policies and procedures.

  5. Quantifying human response capabilities towards tsunami threats at community level

    Science.gov (United States)

    Post, J.; Mück, M.; Zosseder, K.; Wegscheider, S.; Taubenböck, H.; Strunz, G.; Muhari, A.; Anwar, H. Z.; Birkmann, J.; Gebert, N.

    2009-04-01

    Decision makers at the community level need detailed information on tsunami risks in their area. Knowledge on potential hazard impact, exposed elements such as people, critical facilities and lifelines, people's coping capacity and recovery potential are crucial to plan precautionary measures for adaptation and to mitigate potential impacts of tsunamis on society and the environment. A crucial point within a people-centred tsunami risk assessment is to quantify the human response capabilities towards tsunami threats. Based on this quantification and spatial representation in maps tsunami affected and safe areas, difficult-to-evacuate areas, evacuation target points and evacuation routes can be assigned and used as an important contribution to e.g. community level evacuation planning. Major component in the quantification of human response capabilities towards tsunami impacts is the factor time. The human response capabilities depend on the estimated time of arrival (ETA) of a tsunami, the time until technical or natural warning signs (ToNW) can be received, the reaction time (RT) of the population (human understanding of a tsunami warning and the decision to take appropriate action), the evacuation time (ET, time people need to reach a safe area) and the actual available response time (RsT = ETA - ToNW - RT). If RsT is larger than ET, people in the respective areas are able to reach a safe area and rescue themselves. Critical areas possess RsT values equal or even smaller ET and hence people whin these areas will be directly affected by a tsunami. Quantifying the factor time is challenging and an attempt to this is presented here. The ETA can be derived by analyzing pre-computed tsunami scenarios for a respective area. For ToNW we assume that the early warning center is able to fulfil the Indonesian presidential decree to issue a warning within 5 minutes. RT is difficult as here human intrinsic factors as educational level, believe, tsunami knowledge and experience

  6. Ara-C cytokinetic studies in normal tissues in vivo

    Energy Technology Data Exchange (ETDEWEB)

    Pallavicini, M.G.; Gray, J.W.

    1982-01-01

    The importance of including normal tissues in the design of cytokinetic-based chemotherapeutic schedules is becoming increasingly apparent. However, the lack of rapid analytical techniques to obtain quantitative cytokinetic data on target subpopulations in heterogenous normal tissues, such as the gastrointestinal and hematopoietic system, has limited the inclusion of these tissues in therapy design. Once target subpopulations are identified and/or discriminated, flow cytometry in conjunction with radioactivity measurements by liquid scintillation counting can be used to rapidly obtain quantitative cytokinetic data during drug therapy. The present paper reviews our current cytokinetic techniques and the applications and limitations of these techniques in the analysis of Ara-C induced perturbations in the small intestine and hematopoetic system. Cell cycle information both prior to and 30 hrs following a single Ara-C treatment was obtained in the intestinal crypts and femoral marrow population using radioactive precursor uptake and flow cytometric techniques. In addition, the relationship between crypt cell survival and animal lethality following Ara-C treatment was determined to better understand the impact of a damage to a regenerative population on the ''clinical endpoint'' of animal survival. Understanding the principles behind the normal tissue toxicity which occurs during multidose treatment will hopefully allow modulation of this toxicity through the rational design of optimal chemotherapeutic schedules.

  7. Emergency Response Capability Baseline Needs Assessment - Compliance Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Sharry, John A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-09-01

    This document was prepared by John A. Sharry, LLNL Fire Marshal and Division Leader for Fire Protection and was reviewed by LLNL Emergency Management Department Head, James Colson. This document is the second of a two-part analysis on Emergency Response Capabilities of Lawrence Livermore National Laboratory. The first part, 2016 Baseline Needs Assessment Requirements Document established the minimum performance criteria necessary to meet mandatory requirements. This second part analyses the performance of Lawrence Livermore Laboratory Emergency Management Department to the contents of the Requirements Document. The document was prepared based on an extensive review of information contained in the 2016 BNA, a review of Emergency Planning Hazards Assessments, a review of building construction, occupancy, fire protection features, dispatch records, LLNL alarm system records, fire department training records, and fire department policies and procedures. The 2013 BNA was approved by NNSA’s Livermore Field Office on January 22, 2014.

  8. Smart responsive microcapsules capable of recognizing heavy metal ions.

    Science.gov (United States)

    Pi, Shuo-Wei; Ju, Xiao-Jie; Wu, Han-Guang; Xie, Rui; Chu, Liang-Yin

    2010-09-15

    Smart responsive microcapsules capable of recognizing heavy metal ions are successfully prepared with oil-in-water-in-oil double emulsions as templates for polymerization in this study. The microcapsules are featured with thin poly(N-isopropylacrylamide-co-benzo-18-crown-6-acrylamide) (P(NIPAM-co-BCAm)) membranes, and they can selectively recognize special heavy metal ions such as barium(II) or lead(II) ions very well due to the "host-guest" complexation between the BCAm receptors and barium(II) or lead(II) ions. The stable BCAm/Ba(2+) or BCAm/Pb(2+) complexes in the P(NIPAM-co-BCAm) membrane cause a positive shift of the volume phase transition temperature of the crosslinked P(NIPAM-co-BCAm) hydrogel to a higher temperature, and the repulsion among the charged BCAm/Ba(2+) or BCAm/Pb(2+) complexes and the osmotic pressure within the P(NIPAM-co-BCAm) membranes result in the swelling of microcapsules. Induced by recognizing barium(II) or lead(II) ions, the prepared microcapsules with P(NIPAM-co-BCAm) membranes exhibit isothermal and significant swelling not only in outer and inner diameters but also in the membrane thickness. The proposed microcapsules in this study are highly attractive for developing smart sensors and/or carriers for detection and/or elimination of heavy metal ions.

  9. Ara-C cytokinetic studies in normal tissues in vivo.

    Science.gov (United States)

    Pallavicini, M G; Gray, J W

    1982-01-01

    The importance of including normal tissues in the design of cytokinetic-based chemotherapeutic schedules is becoming increasingly apparent. However, the lack of rapid analytical techniques to obtain quantitative cytokinetic data on target subpopulations in heterogenous normal tissues, such as the gastrointestinal and hematopoietic system, has limited the inclusion of these tissues in therapy design. Once target subpopulations are identified and/or discriminated, flow cytometry in conjunction with radioactivity measurements by liquid scintillation counting can be used to rapidly obtain quantitative cytokinetic data during drug therapy. The present paper reviews our current cytokinetic techniques and the applications and limitations of these techniques in the analysis of Ara-C-induced perturbations in the small intestine and hematopoietic system. Cell cycle information both prior to and 30 hrs following a single Ara-C treatment was obtained in the intestinal crypts and femoral marrow population using radioactive precursor uptake and flow cytometric techniques. In addition, the relationship between crypt cell survival and animal lethality following Ara-C treatment was determined to better understand the impact of a damage to a regenerative population on the "clinical endpoint" of animal survival. Understanding the principles behind the normal tissue toxicity which occurs during multidose treatment will hopefully allow modulation of this toxicity through the rational design of optimal chemotherapeutic schedules.

  10. Request and Requirements Development Process for Operationally Responsive Space Capabilities

    Science.gov (United States)

    2013-03-01

    developmental time the SeeMe satellites would leverage commercial off the shelf components.39 The ORS office, working with DARPA and the commercial vender would...include an inventory of capabilities on the shelf or at a minimum available through partnerships established with commercial venders . To accomplish

  11. Sense and Respond Logistics: Integrating Prediction, Responsiveness, and Control Capabilities

    Science.gov (United States)

    2006-01-01

    architecture (Cougaar) platform . Cougaar is a Java-based architecture for the con- struction of large-scale distributed agent-based applications.32...mentation of a robust S&RCS capability will require AL applications on some judiciously chosen existing weapon system platforms , neces- sitating extensive...negotiation) as part of eCommerce applications being achieved by 2007. In the general opinion of AgentLink’s respondents, as well as our technology

  12. Prerequisites for building a computer security incident response capability

    CSIR Research Space (South Africa)

    Mooi, M

    2015-08-01

    Full Text Available There are a number of considerations before one can commence with establishing a Computer Security Incident Response Team (CSIRT). This paper presents the results of a structured literature review investigating the business requirements...

  13. 78 FR 44619 - Aviation Rulemaking Advisory Committee (ARAC) Airman Testing Standards and Training Working Group...

    Science.gov (United States)

    2013-07-24

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Aviation Rulemaking Advisory Committee (ARAC) Airman Testing Standards and Training Working Group (ATSTWG) AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice...

  14. A functional single-nucleotide polymorphism in the human cytidine deaminase gene contributing to ara-C sensitivity.

    Science.gov (United States)

    Yue, Lijie; Saikawa, Yutaka; Ota, Kazuhisa; Tanaka, Motohiro; Nishimura, Ryosei; Uehara, Takahiro; Maeba, Hideaki; Ito, Takashi; Sasaki, Takuma; Koizumi, Shoichi

    2003-01-01

    To test the hypothesis that analyses of drug targets for polymorphism will help to establish gene-based information for the treatment of cancer patients, we investigated the functional single-nucleotide polymorphisms in the human cytidine deaminase (HDCA) gene. The cDNAs from 52 leukaemia/lymphoma samples and 169 control blood samples were direct-sequenced and analysed for the polymorphisms. Three different polymorphisms (A79C, G208A and T435C) were identified in the coding region of the HDCA gene and displayed allelic frequencies of 20.1%, 4.3% and 70.1%, respectively. No association with susceptibility to disease was observed. A novel polymorphism, G208A produced an alanine to threonine substitution (A70T) within the conserved catalytic domain. By introduction of the polymorphic HCDA genes into the yeast CDA-null mutants, the HCDA-70T showed 40% and 32% activity of prototype for cytidine and ara-C substrates, respectively (P HCDA-70T was 757 +/- 33 micromol and was significantly lower (P < 0.01) than that of prototype (941 +/- 58 micromol). This study demonstrated a population characterized with 208A genotype for, which potentially leads one more sensitive to ara-C treatment than prototype. Accumulation of polymorphisms in the genes responsible for drug metabolism and determination of polymorphism-induced biological variations could provide the additional therapeutic strategies in risk-stratified protocols for the treatment of childhood malignancies.

  15. A Highly Capable Year 6 Student's Response to a Challenging Mathematical Task

    Science.gov (United States)

    Livy, Sharyn; Holmes, Marilyn; Ingram, Naomi; Linsell, Chris; Sullivan, Peter

    2016-01-01

    Highly capable mathematics students are not usually considered strugglers. This paper reports on a case study of a Year 6 student, Debbie, her response to a lesson, and her learning involving a challenging mathematical task. Debbie, usually a highly capable student, struggled to complete a challenging mathematical task by herself, but as the…

  16. European contract law and the capabilities approach: on distributive responsibility for contract law

    NARCIS (Netherlands)

    Tjon Soei Len, L.; Weidtmann, N.; Hölzchen, Y.M.; Hawa, B.

    2012-01-01

    This paper argues that the normative requirements of Nussbaum’s capabilities approach extend to contract law (and private law more broadly). Contract law is part of a society’s basic structure, i.e. the responsibility bearing structure that is to secure and enhance individuals’ basic capabilities.

  17. How Stakeholder Sensing and Anticipations Shape the Firm’s Strategic Response Capability

    DEFF Research Database (Denmark)

    Hallin, Carina Antonia; Andersen, Torben Juul; Ooi, Can-Seng

    We outline a strategic response capability framework drawing on cognitive neuroscience to explain stakeholder sensing and anticipations as essential input to environmental analysis. Stakeholders receive stimuli from ongoing interactions with the firm and thereby sense current environmental changes...

  18. Development, Verification and Validation of Enclosure Radiation Capabilities in the CHarring Ablator Response (CHAR) Code

    Science.gov (United States)

    Salazar, Giovanni; Droba, Justin C.; Oliver, Brandon; Amar, Adam J.

    2016-01-01

    With the recent development of multi-dimensional thermal protection system (TPS) material response codes including the capabilities to account for radiative heating is a requirement. This paper presents the recent efforts to implement such capabilities in the CHarring Ablator Response (CHAR) code developed at NASA's Johnson Space Center. This work also describes the different numerical methods implemented in the code to compute view factors for radiation problems involving multiple surfaces. Furthermore, verification and validation of the code's radiation capabilities are demonstrated by comparing solutions to analytical results, to other codes, and to radiant test data.

  19. ARAC--The Montreal Jewish General Hospital Alzheimer Risk Assessment Clinic.

    Science.gov (United States)

    Schipper, Hyman M; Liberman, Adrienne; Kelner, Nora; Babins, Lennie; Fried, Lynda; Bilbul, Melanie; Goodman, Rachel

    2011-07-01

    In parallel with robust efforts world-wide to develop effective neuroprotection for established disease, resources are being mobilized to delineate risk factors and implement preventive measures in a concerted effort to forestall the anticipated Alzheimer disease (AD) epidemic. A review of heritable and 'acquired' dementia risk factors, many operating at midlife, is presented in a companion paper. In 2009, an Alzheimer Risk Assessment Clinic (ARAC) was established at the Jewish General Hospital (Montreal) to address the concerns increasingly being voiced by active middle-aged individuals at risk for AD. A positive family history of AD and/or perceived changes in personal cognitive function (predominantly short-term memory) are main reasons for referral. The primary objectives of ARAC are to (i) ascertain, inform and mitigate the risks of developing AD in cognitively-healthy persons aged 40-65 based on best available medical and epidemiological evidence, (ii) conduct scientific research on midlife dementia risk and prevention in this population and (iii) provide instruction in dementia risk assessment and management to health professionals, clinical/research fellows, medical residents and students. ARAC infrastructure, evaluation protocol, risk profile classification scheme, interventions, knowledge dissemination program, case vignettes, and seminal research projects are described. It is hoped that ARAC and similar initiatives will help prevent or delay dementia by innovating effective interventions based on increasingly nuanced estimation of modifiable AD risk in presymptomatic persons.

  20. 30 CFR 254.45 - Verifying the capabilities of your response equipment.

    Science.gov (United States)

    2010-07-01

    ... accordance with MMS-approved test criteria. You may use the document “Test Protocol for the Evaluation of Oil... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Verifying the capabilities of your response equipment. 254.45 Section 254.45 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE...

  1. Pharmacokinetic characteristics of L-valyl-ara-C and its implication on the oral delivery of ara-C

    Institute of Scientific and Technical Information of China (English)

    Eun-pa CHEON; Hyo-kyung HAN

    2007-01-01

    Aim: To evaluate the pharmacokinetic characteristics of L-valyl-ara-C, a peptidomimetic prodrug of ara-C. Methods: After the synthesis of L-valyl-ara-C, the in vitro stability of L-valyl-ara-C was examined in various biological media. Plasma phannacokinetic profiles of ara-C and L-valyl-ara-C were also evaluated in rats. Results: The degradation of L-valyl-ara-C was negligible in fresh plasma and also in the presence of plasmin over a 2 h incubation period. Furthermore, L-valyl-ara-C appeared to be stable in the leukemia cell homogenates, and subsequently, it was far less cytotoxic than the parent, ara-C in AML2 and L1210cells. The chemical hydrolysis of L-valyl-ara-C was rather accelerated in acidic pH. Following an oral administration of L-valyl-ara-C, the appearance of ara-Cwas observed in plasma although the systemic exposure of the prodrug was much higher than that of ara-C. The bioavailability of ara-C was about 4% via prodrug administration. Conclusion: The amide bond of L-valyl-ara-C was stable against the enzymatic hydrolysis, and the utility of L-valyl-ara-C as an oral delivery sys-tem of ara-C appeared to be limited by its low metabolic conversion to ara-C in rats.

  2. Capability-based task allocation in emergency-response environments: a coalition-formation approach

    OpenAIRE

    FATEMI, Afsaneh; Zamanifar, Kamran; NEMATBAKHSH, Naser

    2014-01-01

    This paper addresses coalition formation, based on agent capabilities, centered on task allocation in emergency-response environments (EREs). EREs are environments that need fast task completion as their main requirement. We propose a team-based organization model, based on an existing organization model for adaptive complex systems. The model has some key characteristics that are beneficial for EREs: agents act in dynamic, open domains; agents collaborate in completing group tasks;...

  3. The International Space Station: New Capabilities for Disaster Response and Humanitarian Aid

    Science.gov (United States)

    Stefanov, William

    2012-01-01

    The International Space Station (ISS) has been acquiring Earth imagery since 2000, primarily in the form of astronaut photography using hand-held film and digital cameras. Recent additions of more sophisticated multispectral and hyperspectral sensor systems have expanded both the capabilities and relevance of the ISS to basic research, applied Earth science, and development of new sensor technologies. Funding opportunities established within NASA, the US National Laboratories and the international partner organizations have generated instrument proposals that will further enhance these capabilities. With both internal and external sensor location options, and the availability of both automated and human-tended operational environments, the ISS is a unique platform within the constellation of Earth-observing satellites currently in orbit. Current progress and challenges associated with development of ISS terrestrial remote sensing capabilities in the area of disaster response and support of relief efforts will be presented. The ISS orbit allows for imaging of the Earth's surface at varying times of day and night, providing opportunities for data collection over approximately 95% of the populated regions. These opportunities are distinct from--yet augment--the data collection windows for the majority of sensors on polar-orbiting satellites. In addition to this potential for "being in the right place at the right time" to collect critical information on an evolving disaster, the presence of a human crew also allows for immediate recognition of an event from orbit, notification of relevant organizations on the ground, and re-tasking of available remote sensing resources to support humanitarian response and relief efforts. Challenges to establishing an integrated response capability are both technical (coordination of sensor targeting and data collection, rapid downlink and posting of data to a central accessible hub, timely generation and distribution of relevant data

  4. Survey of state and tribal emergency response capabilities for radiological transportation incidents

    Energy Technology Data Exchange (ETDEWEB)

    Vilardo, F J; Mitter, E L; Palmer, J A; Briggs, H C; Fesenmaier, J [Indiana Univ., Bloomington, IN (USA). School of Public and Environmental Affairs

    1990-05-01

    This publication is the final report of a project to survey the fifty states, the District of Columbia, Puerto Rico, and selected Indian Tribal jurisdictions to ascertain their emergency-preparedness planning and capabilities for responding to transportation incidents involving radioactive materials. The survey was conducted to provide the Nuclear Regulatory Commission and other federal agencies with information concerning the current level of emergency-response preparedness of the states and selected tribes and an assessment of the changes that have occurred since 1980. There have been no major changes in the states' emergency-response planning strategies and field tactics. The changes noted included an increased availability of dedicated emergency-response vehicles, wider availability of specialized radiation-detection instruments, and higher proportions of police and fire personnel with training in the handling of suspected radiation threats. Most Indian tribes have no capability to evaluate suspected radiation threats and have no formal relations with emergency-response personnel in adjacent states. For the nation as a whole, the incidence of suspected radiation threats declined substantially from 1980 to 1988. 58 tabs.

  5. Social absorption capability, systems of innovation and manufactured export response to preferential trade incentives

    DEFF Research Database (Denmark)

    Na-Allah, Abdelrasaq; Muchie, Mammo

    2012-01-01

    in the process is relegated to the background. This paper argues that social absorption capability of a beneficiary's economy as expressed in her incumbent systems of innovation is a crucial determinant of export performance response. The experience of Sub-Saharan African countries under the US African Growth...... & Opportunity Act apparel trade incentive is used as a classical illustration of this proposition. It is shown that the comparative efficiency of Lesetho, despite emerging from a relatively weak trade performance potential background, in recording the highest level of export success among beneficiaries...

  6. A Comprehensive Evaluation System for Military Hospitals' Response Capability to Bio-terrorism.

    Science.gov (United States)

    Wang, Hui; Jiang, Nan; Shao, Sicong; Zheng, Tao; Sun, Jianzhong

    2015-05-01

    The objective of this study is to establish a comprehensive evaluation system for military hospitals' response capacity to bio-terrorism. Literature research and Delphi method were utilized to establish the comprehensive evaluation system for military hospitals' response capacity to bio-terrorism. Questionnaires were designed and used to survey the status quo of 134 military hospitals' response capability to bio-terrorism. Survey indicated that factor analysis method was suitable to for analyzing the comprehensive evaluation system for military hospitals' response capacity to bio-terrorism. The constructed evaluation system was consisted of five first-class and 16 second-class indexes. Among them, medical response factor was considered as the most important factor with weight coefficient of 0.660, followed in turn by the emergency management factor with weight coefficient of 0.109, emergency management consciousness factor with weight coefficient of 0.093, hardware support factor with weight coefficient of 0.078, and improvement factor with weight coefficient of 0.059. The constructed comprehensive assessment model and system are scientific and practical.

  7. Hazards Response of Energetic Materials - Initiation Mechanisms, Experimental Characterization, and Development of Predictive Capability

    Energy Technology Data Exchange (ETDEWEB)

    Maienschein, J; Nichols III, A; Reaugh, J; McClelland, M; Hsu, P C

    2005-04-15

    We present our approach to develop a predictive capability for hazards -- thermal and non-shock impact -- response of energetic material systems based on: (A) identification of relevant processes; (B) characterization of the relevant properties; (C) application of property data to predictive models; and (D) application of the models into predictive simulation. This paper focuses on the first two elements above, while a companion paper by Nichols et al focuses on the final two elements. We outline the underlying mechanisms of hazards response and their interactions, and present our experimental work to characterize the necessary material parameters, including thermal ignition, thermal and mechanical properties, fracture/fragmentation behavior, deflagration rates, and the effect of material damage. We also describe our validation test, the Scaled Thermal Explosion Experiment. Finally, we integrate the entire collection of data into a qualitative understanding that is useful until such time as the predictive models become available.

  8. Lawrence Livermore National Laboratory Emergency Response Capability Baseline Needs Assessment Requirement Document

    Energy Technology Data Exchange (ETDEWEB)

    Sharry, J A

    2009-12-30

    This revision of the LLNL Fire Protection Baseline Needs Assessment (BNA) was prepared by John A. Sharry, LLNL Fire Marshal and LLNL Division Leader for Fire Protection and reviewed by Martin Gresho, Sandia/CA Fire Marshal. The document follows and expands upon the format and contents of the DOE Model Fire Protection Baseline Capabilities Assessment document contained on the DOE Fire Protection Web Site, but only address emergency response. The original LLNL BNA was created on April 23, 1997 as a means of collecting all requirements concerning emergency response capabilities at LLNL (including response to emergencies at Sandia/CA) into one BNA document. The original BNA documented the basis for emergency response, emergency personnel staffing, and emergency response equipment over the years. The BNA has been updated and reissued five times since in 1998, 1999, 2000, 2002, and 2004. A significant format change was performed in the 2004 update of the BNA in that it was 'zero based.' Starting with the requirement documents, the 2004 BNA evaluated the requirements, and determined minimum needs without regard to previous evaluations. This 2010 update maintains the same basic format and requirements as the 2004 BNA. In this 2010 BNA, as in the previous BNA, the document has been intentionally divided into two separate documents - the needs assessment (1) and the compliance assessment (2). The needs assessment will be referred to as the BNA and the compliance assessment will be referred to as the BNA Compliance Assessment. The primary driver for separation is that the needs assessment identifies the detailed applicable regulations (primarily NFPA Standards) for emergency response capabilities based on the hazards present at LLNL and Sandia/CA and the geographical location of the facilities. The needs assessment also identifies areas where the modification of the requirements in the applicable NFPA standards is appropriate, due to the improved fire protection

  9. Comparing the response of PSD-capable plastic scintillator to standard liquid scintillator

    Science.gov (United States)

    Woolf, Richard S.; Hutcheson, Anthony L.; Gwon, Chul; Phlips, Bernard F.; Wulf, Eric A.

    2015-06-01

    This work discusses a test campaign to characterize the response of the recently developed plastic scintillator with pulse shape discrimination (PSD) capabilities (EJ-299-33). PSD is a property exhibited by certain types of scintillating material in which incident stimuli (fast neutrons or γ rays) can be separated by exploiting differences in the scintillation light pulse tail. Detector geometries used were: a 10 cm×10 cm×10 cm cube and a 10-cm diameter×10-cm long cylinder. EJ-301 and EJ-309 liquid scintillators with well-known responses were also tested. The work was conducted at the University of Massachusetts Lowell Van De Graaff accelerator. The facility accelerated protons on a thin Li target to yield quasi-monoenergetic neutrons from the 7Li(p,n)7Be reaction (Q-value: -1.644 MeV). Collimated fast neutrons were obtained by placing detectors behind a neutron spectrometer. Rotating the spectrometer, and thus changing the neutron energy, allowed us to achieve 0.5-3.2 MeV neutrons in 200-300 keV steps. Data were acquired through a flash analog-to-digital converter (ADC) capable of performing digital PSD measurements. By using the PSD technique to separate the neutron events from unwanted γ background, we constructed a pulse height spectrum at each energy. Obtaining a relationship of the relative light output versus energy allowed us to construct the response function for the EJ-299-33 and liquid scintillator. The EJ-299-33 response in terms of electron equivalent energy (Ee.e.) vs. proton equivalent energy (Ep.e.), how it compared with the standard xylene-based EJ-301 (or, NE-213/BC-501 A equivalent) and EJ-309 liquid scintillator response, and how the EJ-301 and EJ-309 compared, are presented. We find that the EJ-299-33 demonstrated a lower light output by up to 40% for <1.0 MeV neutrons; and ranging between a 5-35% reduction for 2.5-3.0 MeV neutrons compared to the EJ-301/309, depending on the scintillator and geometry. Monte Carlo modeling techniques were

  10. Building a capabilities network to improve disaster preparation efforts in the European Command (EUCOM) area of responsibility

    OpenAIRE

    Daniels III, Charles E.

    2012-01-01

    Approved for public release; distribution is unlimited. United States European Commands (EUCOM) website states that the breadth of responsibility across 51 countries can factor significantly into partnering opportunities and challenges. In order to understand this responsibility, this research analyzes the capabilities of 25 non-governmental organizations in EUCOMs area of responsibility (AOR). Each organization is evaluated in six areas mission, primary focus, capabilities, religious affi...

  11. Unclassified Computing Capability: User Responses to a Multiprogrammatic and Institutional Computing Questionnaire

    Energy Technology Data Exchange (ETDEWEB)

    McCoy, M; Kissel, L

    2002-01-29

    We are experimenting with a new computing model to be applied to a new computer dedicated to that model. Several LLNL science teams now have computational requirements, evidenced by the mature scientific applications that have been developed over the past five plus years, that far exceed the capability of the institution's computing resources. Thus, there is increased demand for dedicated, powerful parallel computational systems. Computation can, in the coming year, potentially field a capability system that is low cost because it will be based on a model that employs open source software and because it will use PC (IA32-P4) hardware. This incurs significant computer science risk regarding stability and system features but also presents great opportunity. We believe the risks can be managed, but the existence of risk cannot be ignored. In order to justify the budget for this system, we need to make the case that it serves science and, through serving science, serves the institution. That is the point of the meeting and the White Paper that we are proposing to prepare. The questions are listed and the responses received are in this report.

  12. Corporate Social Responsibility in Buyer-Supplier Relationships: Is it Beneficial for Top-Tier Suppliers to Market their Capability to Ensure a Responsible Supply Chain?

    National Research Council Canada - National Science Library

    Leppelt, Thomas; Foerstl, Kai; Hartmann, Evi

    2013-01-01

    This study assesses how top-tier suppliers market their capabilities to ensure a responsible upstream supply chain to their downstream buyers, and how the marketing of corporate social responsibility (CSR...

  13. [Effect of salidroside on apoptosis of bone marrow mesenchymal stem cells induced by ara-C].

    Science.gov (United States)

    Wei, Yu-Ping; Bai, Hai; Sun, Yan-Qing; Bao, Shen; Xi, Rui; Liu, Lin

    2013-12-01

    The purpose of this study was to investigate the effect of salidroside on human bone marrow mesenchymal stem cell (hBMMSC) apoptosis induced by cytarabine C (Ara-C) and its mechanism, hBMMSC were cultured in vitro and isolated by Fircoll density gradient centrifugation; cell surface antigens were measured by flow cytometry; the osteogenic and adipogenic differentiation of MSC was tested and evaluated by specific staining methods. The proliferation and apoptosis of cells exposed to Ara- C were detected by MTT and flow cytometry respectively. The experiments were divided into 4 groups: control group, Ara-C group, salidroside group and Ara-C+salidroside group. The mRNA expression of BCL-2 and BAX was assayed by RT-PCR. The results showed that the adherent cells displayed spindle and fibroblast cell-like shape; the hBMMSC expressed CD44, CD71 and HLA-ABC, not expressed CD34, CD45 and HLA-DR; the hBMMSC successfully differentiated into osteogenic and adipogenic lineages, which showed mineralization with von Kossa staining. Furthermore, liquid vacuoles were detected by oil red O staining; Ara- C exhibited a less inhibitory effect on the proliferation of hBMMSC treated with salidroside. The apoptosis of hBMMSC treated with salidroside were significantly higher as compared with control group (P Salidroside significantly inhibited the apoptosis of MSC and reversed the mRNA expression of BCL-2 and BAX. It is concluded that salidroside can inhibit the apoptosis of hBMMSC induced by Ara-C, its mechanism may be related with the regulation of BCL-2/BAX expression.

  14. Cloned, CD117 selected human amniotic fluid stem cells are capable of modulating the immune response.

    Directory of Open Access Journals (Sweden)

    Emily C Moorefield

    Full Text Available Amniotic fluid stem (AFS cells are broadly multipotent, can be expanded extensively in culture, are not tumorigenic and can be readily cryopreserved for cell banking. Mesenchymal stem cells (MSC show immunomodulatory activity and secrete a wide spectrum of cytokines and chemokines that suppress inflammatory responses, block mixed lymphocyte reactions (MLR and other immune reactions, and have proven therapeutic against conditions such as graft-versus-host disease. AFS cells resemble MSCs in many respects including surface marker expression and differentiation potential. We therefore hypothesized that AFS cells may exhibit similar immunomodulatory capabilities. We present data to demonstrate that direct contact with AFS cells inhibits lymphocyte activation. In addition, we show that cell-free supernatants derived from AFS cells primed with total blood monocytes or IL-1β, a cytokine released by monocytes and essential in mediation of the inflammatory response, also inhibited lymphocyte activation. Further investigation of AFS cell-free supernatants by protein array revealed secretion of multiple factors in common with MSCs that are known to be involved in immune regulation including growth related oncogene (GRO and monocyte chemotactic protein (MCP family members as well as interleukin-6 (IL-6. AFS cells activated by PBMCs released several additional cytokines as compared to BM-MSCs, including macrophage inflammatory protein-3α (MIP-3α, MIP-1α and Activin. AFS cells also released higher levels of MCP-1 and lower levels of MCP-2 compared to BM-MSCs in response to IL-1β activation. This suggests that there may be some AFS-specific mechanisms of inhibition of lymphocyte activation. Our results indicate that AFS cells are able to suppress inflammatory responses in vitro and that soluble factors are an essential component in the communication between lymphocytes and AFS cells. Their extensive self-renewal capacity, possibility for banking and

  15. [Combination induction of cell differentiation of HL-60 cells by daidzein (S86019) and BC-4 or Ara-C].

    Science.gov (United States)

    Jing, Y K; Han, R

    1993-01-01

    Experiments demonstrated that the cell differentiation of HL-60 cells induced by low concentrations of daidzein (S86019), BC-4 (active principle of Boswellia carterii Birdw) and Ara-C was not impressive. However, when they were used in combination 80% of HL-60 cells exhibited NBT reduction and 82% of the cells showed phagocytosis after four days exposure to daidzein and BC-4. When HL-60 cells were exposed to daidzein and Ara-c, 70% of the cells exhibited NBT reduction and phagocytosis. Flow cytometry indicated that the majority of the cells were blocked at G1 phase under the induction of combination of daidzein with BC-4 or Ara-C.

  16. Comparing the response of PSD-capable plastic scintillator to standard liquid scintillator

    Energy Technology Data Exchange (ETDEWEB)

    Woolf, Richard S., E-mail: richard.woolf@nrl.navy.mil [High Energy Space Environment Branch, Space Science Division, U. S. Naval Research Laboratory, 4555 Overlook Ave., SW, Washington, DC 20375 (United States); Hutcheson, Anthony L., E-mail: anthony.hutcheson@nrl.navy.mil [High Energy Space Environment Branch, Space Science Division, U. S. Naval Research Laboratory, 4555 Overlook Ave., SW, Washington, DC 20375 (United States); Gwon, Chul, E-mail: chul.gwon@nrl.navy.mil [High Energy Space Environment Branch, Space Science Division, U. S. Naval Research Laboratory, 4555 Overlook Ave., SW, Washington, DC 20375 (United States); Phlips, Bernard F., E-mail: bernard.phlips@nrl.navy.mil [High Energy Space Environment Branch, Space Science Division, U. S. Naval Research Laboratory, 4555 Overlook Ave., SW, Washington, DC 20375 (United States); Wulf, Eric A., E-mail: eric.wulf@nrl.navy.mil [High Energy Space Environment Branch, Space Science Division, U. S. Naval Research Laboratory, 4555 Overlook Ave., SW, Washington, DC 20375 (United States)

    2015-06-01

    This work discusses a test campaign to characterize the response of the recently developed plastic scintillator with pulse shape discrimination (PSD) capabilities (EJ-299-33). PSD is a property exhibited by certain types of scintillating material in which incident stimuli (fast neutrons or γ rays) can be separated by exploiting differences in the scintillation light pulse tail. Detector geometries used were: a 10 cm×10 cm×10 cm cube and a 10-cm diameter×10-cm long cylinder. EJ-301 and EJ-309 liquid scintillators with well-known responses were also tested. The work was conducted at the University of Massachusetts Lowell Van De Graaff accelerator. The facility accelerated protons on a thin Li target to yield quasi-monoenergetic neutrons from the {sup 7}Li(p,n){sup 7}Be reaction (Q-value: –1.644 MeV). Collimated fast neutrons were obtained by placing detectors behind a neutron spectrometer. Rotating the spectrometer, and thus changing the neutron energy, allowed us to achieve 0.5–3.2 MeV neutrons in 200–300 keV steps. Data were acquired through a flash analog-to-digital converter (ADC) capable of performing digital PSD measurements. By using the PSD technique to separate the neutron events from unwanted γ background, we constructed a pulse height spectrum at each energy. Obtaining a relationship of the relative light output versus energy allowed us to construct the response function for the EJ-299-33 and liquid scintillator. The EJ-299-33 response in terms of electron equivalent energy (E{sub e.e.}) vs. proton equivalent energy (E{sub p.e.}), how it compared with the standard xylene-based EJ-301 (or, NE-213/BC-501 A equivalent) and EJ-309 liquid scintillator response, and how the EJ-301 and EJ-309 compared, are presented. We find that the EJ-299-33 demonstrated a lower light output by up to 40% for <1.0 MeV neutrons; and ranging between a 5–35% reduction for 2.5–3.0 MeV neutrons compared to the EJ-301/309, depending on the scintillator and geometry

  17. Lawrence Livermore National Laboratory Emergency Response Capability 2009 Baseline Needs Assessment Performance Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Sharry, J A

    2009-12-30

    This document was prepared by John A. Sharry, LLNL Fire Marshal and Division Leader for Fire Protection and was reviewed by Sandia/CA Fire Marshal, Martin Gresho. This document is the second of a two-part analysis of Emergency Response Capabilities of Lawrence Livermore National Laboratory. The first part, 2009 Baseline Needs Assessment Requirements Document established the minimum performance criteria necessary to meet mandatory requirements. This second part analyses the performance of Lawrence Livermore Laboratory Emergency Management Department to the contents of the Requirements Document. The document was prepared based on an extensive review of information contained in the 2004 BNA, a review of Emergency Planning Hazards Assessments, a review of building construction, occupancy, fire protection features, dispatch records, LLNL alarm system records, fire department training records, and fire department policies and procedures. On October 1, 2007, LLNL contracted with the Alameda County Fire Department to provide emergency response services. The level of service called for in that contract is the same level of service as was provided by the LLNL Fire Department prior to that date. This Compliance Assessment will evaluate fire department services beginning October 1, 2008 as provided by the Alameda County Fire Department.

  18. Lawrence Livermore National Laboratory Emergency Response Capability Baseline Needs Assessment Requirement Document

    Energy Technology Data Exchange (ETDEWEB)

    Sharry, J A

    2009-12-30

    This revision of the LLNL Fire Protection Baseline Needs Assessment (BNA) was prepared by John A. Sharry, LLNL Fire Marshal and LLNL Division Leader for Fire Protection and reviewed by Martin Gresho, Sandia/CA Fire Marshal. The document follows and expands upon the format and contents of the DOE Model Fire Protection Baseline Capabilities Assessment document contained on the DOE Fire Protection Web Site, but only address emergency response. The original LLNL BNA was created on April 23, 1997 as a means of collecting all requirements concerning emergency response capabilities at LLNL (including response to emergencies at Sandia/CA) into one BNA document. The original BNA documented the basis for emergency response, emergency personnel staffing, and emergency response equipment over the years. The BNA has been updated and reissued five times since in 1998, 1999, 2000, 2002, and 2004. A significant format change was performed in the 2004 update of the BNA in that it was 'zero based.' Starting with the requirement documents, the 2004 BNA evaluated the requirements, and determined minimum needs without regard to previous evaluations. This 2010 update maintains the same basic format and requirements as the 2004 BNA. In this 2010 BNA, as in the previous BNA, the document has been intentionally divided into two separate documents - the needs assessment (1) and the compliance assessment (2). The needs assessment will be referred to as the BNA and the compliance assessment will be referred to as the BNA Compliance Assessment. The primary driver for separation is that the needs assessment identifies the detailed applicable regulations (primarily NFPA Standards) for emergency response capabilities based on the hazards present at LLNL and Sandia/CA and the geographical location of the facilities. The needs assessment also identifies areas where the modification of the requirements in the applicable NFPA standards is appropriate, due to the improved fire protection

  19. Cellular intrinsic mechanism affecting the outcome of AML treated with Ara-C in a syngeneic mouse model.

    Directory of Open Access Journals (Sweden)

    Wenjun Zhao

    Full Text Available The mechanisms underlying acute myeloid leukemia (AML treatment failure are not clear. Here, we established a mouse model of AML by syngeneic transplantation of BXH-2 derived myeloid leukemic cells and developed an efficacious Ara-C-based regimen for treatment of these mice. We proved that leukemic cell load was correlated with survival. We also demonstrated that the susceptibility of leukemia cells to Ara-C could significantly affect the survival. To examine the molecular alterations in cells with different sensitivity, genome-wide expression of the leukemic cells was profiled, revealing that overall 366 and 212 genes became upregulated or downregulated, respectively, in the resistant cells. Many of these genes are involved in the regulation of cell cycle, cellular proliferation, and apoptosis. Some of them were further validated by quantitative PCR. Interestingly, the Ara-C resistant cells retained the sensitivity to ABT-737, an inhibitor of anti-apoptosis proteins, and treatment with ABT-737 prolonged the life span of mice engrafted with resistant cells. These results suggest that leukemic load and intrinsic cellular resistance can affect the outcome of AML treated with Ara-C. Incorporation of apoptosis inhibitors, such as ABT-737, into traditional cytotoxic regimens merits consideration for the treatment of AML in a subset of patients with resistance to Ara-C. This work provided direct in vivo evidence that leukemic load and intrinsic cellular resistance can affect the outcome of AML treated with Ara-C, suggesting that incorporation of apoptosis inhibitors into traditional cytotoxic regimens merits consideration for the treatment of AML in a subset of patients with resistance to Ara-C.

  20. Providing Reliability Services through Demand Response: A Prelimnary Evaluation of the Demand Response Capabilities of Alcoa Inc.

    Energy Technology Data Exchange (ETDEWEB)

    Starke, Michael R [ORNL; Kirby, Brendan J [ORNL; Kueck, John D [ORNL; Todd, Duane [Alcoa; Caulfield, Michael [Alcoa; Helms, Brian [Alcoa

    2009-02-01

    Demand response is the largest underutilized reliability resource in North America. Historic demand response programs have focused on reducing overall electricity consumption (increasing efficiency) and shaving peaks but have not typically been used for immediate reliability response. Many of these programs have been successful but demand response remains a limited resource. The Federal Energy Regulatory Commission (FERC) report, 'Assessment of Demand Response and Advanced Metering' (FERC 2006) found that only five percent of customers are on some form of demand response program. Collectively they represent an estimated 37,000 MW of response potential. These programs reduce overall energy consumption, lower green house gas emissions by allowing fossil fuel generators to operate at increased efficiency and reduce stress on the power system during periods of peak loading. As the country continues to restructure energy markets with sophisticated marginal cost models that attempt to minimize total energy costs, the ability of demand response to create meaningful shifts in the supply and demand equations is critical to creating a sustainable and balanced economic response to energy issues. Restructured energy market prices are set by the cost of the next incremental unit of energy, so that as additional generation is brought into the market, the cost for the entire market increases. The benefit of demand response is that it reduces overall demand and shifts the entire market to a lower pricing level. This can be very effective in mitigating price volatility or scarcity pricing as the power system responds to changing demand schedules, loss of large generators, or loss of transmission. As a global producer of alumina, primary aluminum, and fabricated aluminum products, Alcoa Inc., has the capability to provide demand response services through its manufacturing facilities and uniquely through its aluminum smelting facilities. For a typical aluminum smelter

  1. Pre-PCR processing in bioterrorism preparedness: improved diagnostic capabilities for laboratory response networks.

    Science.gov (United States)

    Hedman, Johannes; Knutsson, Rickard; Ansell, Ricky; Rådström, Peter; Rasmusson, Birgitta

    2013-09-01

    Diagnostic DNA analysis using polymerase chain reaction (PCR) has become a valuable tool for rapid detection of biothreat agents. However, analysis is often challenging because of the limited size, quality, and purity of the biological target. Pre-PCR processing is an integrated concept in which the issues of analytical limit of detection and simplicity for automation are addressed in all steps leading up to PCR amplification--that is, sampling, sample treatment, and the chemical composition of PCR. The sampling method should maximize target uptake and minimize uptake of extraneous substances that could impair the analysis--so-called PCR inhibitors. In sample treatment, there is a trade-off between yield and purity, as extensive purification leads to DNA loss. A cornerstone of pre-PCR processing is to apply DNA polymerase-buffer systems that are tolerant to specific sample impurities, thereby lowering the need for expensive purification steps and maximizing DNA recovery. Improved awareness among Laboratory Response Networks (LRNs) regarding pre-PCR processing is important, as ineffective sample processing leads to increased cost and possibly false-negative or ambiguous results, hindering the decision-making process in a bioterrorism crisis. This article covers the nature and mechanisms of PCR-inhibitory substances relevant for agroterrorism and bioterrorism preparedness, methods for quality control of PCR reactions, and applications of pre-PCR processing to optimize and simplify the analysis of various biothreat agents. Knowledge about pre-PCR processing will improve diagnostic capabilities of LRNs involved in the response to bioterrorism incidents.

  2. Pinctada margaritifera responses to temperature and pH: Acclimation capabilities and physiological limits

    Science.gov (United States)

    Le Moullac, Gilles; Soyez, Claude; Latchere, Oihana; Vidal-Dupiol, Jeremie; Fremery, Juliette; Saulnier, Denis; Lo Yat, Alain; Belliard, Corinne; Mazouni-Gaertner, Nabila; Gueguen, Yannick

    2016-12-01

    The pearl culture is one of the most lucrative aquacultures worldwide. In many South Pacific areas, it depends on the exploitation of the pearl oyster Pinctada margaritifera and relies entirely on the environmental conditions encountered in the lagoon. In this context, assessing the impact of climatic stressors, such as global warming and ocean acidification, on the functionality of the resource in terms of renewal and exploitation is fundamental. In this study, we experimentally addressed the impact of temperature (22, 26, 30 and 34 °C) and partial pressure of carbon dioxide pCO2 (294, 763 and 2485 μatm) on the biomineralization and metabolic capabilities of pearl oysters. While the energy metabolism was strongly dependent on temperature, results showed its independence from pCO2 levels; no interaction between temperature and pCO2 was revealed. The energy metabolism, ingestion, oxygen consumption and, hence, the scope for growth (SFG) were maximised at 30 °C and dramatically fell at 34 °C. Biomineralization was examined through the expression measurement of nine mantle's genes coding for shell matrix proteins involved in the formation of calcitic prisms and/or nacreous shell structures; significant changes were recorded for four of the nine (Pmarg-Nacrein A1, Pmarg-MRNP34, Pmarg-Prismalin 14 and Pmarg-Aspein). These changes showed that the maximum and minimum expression of these genes was at 26 and 34 °C, respectively. Surprisingly, the modelled thermal optimum for biomineralization (ranging between 21.5 and 26.5 °C) and somatic growth and reproduction (28.7 °C) appeared to be significantly different. Finally, the responses to high temperatures were contextualised with the Intergovernmental Panel on Climate Change (IPCC) projections, which highlighted that pearl oyster stocks and cultures would be severely threatened in the next decade.

  3. How Overall Logistics Strategy Mediates The Influence Of Market Attractiveness And Dynamic Capability On Strategic Competitive Response

    Directory of Open Access Journals (Sweden)

    Febriyanto

    2015-08-01

    Full Text Available This research is conducted to examine the influence of market attractiveness and dynamic capability on strategic competitive response through overall logistics strategies of logistics service providers LSPs. Involving 266 LSPs SEM-LISREL is applied to test the hypotheses. The findings reveal that the market attractiveness and the dynamic capability positively affect the overall logistics strategy. Additionally the market attractiveness and the dynamic capability positively affect the strategic competitive response. Indirectly the market attractiveness and the dynamic capability positively affect the performance through strategic competitive response of LSPs. Obviously overall logistics strategy strengthen the influence of both market attractiveness and dynamic capability on strategic competitive response. There are five alternatives to optimize the overall logistics strategy of LSPs market intensification integration focus collaboration and strengthening value proposition. The involvement of overall logistics strategy as mediating variable is new paradigm in the strategic management discourses especially in logistics industry. Further research needs to be performed by involving the size of business as control variable and LSPs perception on Governments policies.

  4. Alternatives to Contingency Response Group Organization: Tradeoffs to Balance Capability and Capacity

    Science.gov (United States)

    2014-06-13

    that many CRGs were a “one shot and done” capability was seen as reason to hesitate in using them (435 AGOW Briefing to ASAM , 2014). Closely...Sustainment Command Briefing to ASAM , 2014). Finally, there is negligible impact to the critical capability of synergy in this scenario. 4. What...Sustainment Command Briefing to ASAM . (2014, April 2). 36 CRG Mission Brief. (2014). Provided by 36 CRG/CD. 435 AGOW Briefing to ASAM . (2014, April 1

  5. Homology modeling and validation of SAS2271 transcriptional regulator of AraC family in Staphylococcus aureus

    Directory of Open Access Journals (Sweden)

    Money Gupta

    2013-02-01

    Full Text Available Objective: To predict three dimensional structure of AraC Family transcription regulator protein in staphylococcus aureus involved in causing virulence. Methods: Evolutionary dynamics of S. aureus reveled that several mutations preceding virulence lead to truncated proteins that plays an important role in virulence. The Structural templates are identified using homology search and then homology modelling is used to get the 3-D structure of the protein. Results: The 3-D structure of SAS2271 transcriptional factor of AraC family in MSSA476 strain of S. aureus was modelled and validated using the Ramachandran plot. Conclusions: The knowledge of 3-D structure of the protein will be helpful in identifying its biochemical function along with its regulatory mechanism in causing virulence.

  6. Assessment of Disaster Relief Preparedness Capabilities Networks in the EUCOM, PACOM, and SOUTHCOM Areas of Responsibility

    Science.gov (United States)

    2014-12-01

    International RNRN Registered Nurse Response Network SCM supply chain management SOUTHCOM U.S. Southern Command UCSD PDS University of California San...collaborative networks are a fundamental component of any emergency response” (p. 134). Responding humanitarian agencies can improve efficiencies while...chain management ( SCM ). Commodities and associated costs are well-managed using impartial, transparent and responsive systems (The Sphere

  7. Early Growth Response Genes Signaling Supports Strong Paracrine Capability of Mesenchymal Stem Cells

    Directory of Open Access Journals (Sweden)

    Kenichi Tamama

    2012-01-01

    Full Text Available MSCs provide a promising method for cell therapy through their wound healing and tissue regenerative properties. Originally, MSCs' role in wound healing was thought to be tied to their multipotency, but it is now accepted that MSCs mediate the healing process through their strong paracrine capability. EGF was shown to facilitate in vitro expansion of MSCs without altering multipotency. Our previous data suggest that the molecular machinery underlying MSCs' strong paracrine capability lies downstream of EGFR signaling, and we focus on transcription factors EGR1 and EGR2. Evidence suggests that EGR1 regulates angiogenic and fibrogenic factor production in MSCs, and an EGFR-EGR1-EGFR ligands autocrine loop is one of the underlying mechanisms supporting their strong paracrine machinery through EGR1. EGR2 appears to regulate the expression of immunomodulatory molecules. Chronic nonhealing wounds are ischemic, inflammatory, and often fibrotic, and the hypoxic micro-environment of these wounds may compromise MSCs' wound healing properties in vivo by upregulating the EGR1's fibrogenic effects and downregulating the EGR2's immuno-modulatory effects. Thus, these transcription factors can be potential targets in the optimization of cell-based therapies. Further study in vitro is required to understand MSCs' paracrine machinery and to optimize it as a tool for effective cell-based therapies.

  8. Local governance responses to social inclusion for older rural Victorians: building resources, opportunities and capabilities.

    Science.gov (United States)

    Winterton, Rachel; Clune, Samantha; Warburton, Jeni; Martin, John

    2014-09-01

    To explore how local governance enables access to resources, creates opportunities and increases capability for older people in rural communities to experience social inclusion. Twenty-six semi-structured interviews were undertaken with community stakeholders across two rural communities in north-east Victoria. Stakeholders were drawn from local government, and a range of community groups and organisations, as identified in a scoping study. Through the provision of community resources (e.g. physical and human infrastructure, organisational partnerships), local services and supports offer social and productive environments for participation. They also build individual resources (e.g. health, skills, finances, networks) to enable older people to participate within these environments, and provide assistance to allow older people to use individual and community resources. Community resources are integral in facilitating the development of older people's individual resources, and opportunities and capabilities for participation. These enable greater choice in participation, and contribute to the sustainability of community resources serving ageing populations. © 2013 The Authors. Australasian Journal on Ageing © 2013 ACOTA.

  9. Response distortion in personality measurement: born to deceive, yet capable of providing valid self-assessments?

    Directory of Open Access Journals (Sweden)

    STEPHAN DILCHERT

    2006-09-01

    Full Text Available This introductory article to the special issue of Psychology Science devoted to the subject of “Considering Response Distortion in Personality Measurement for Industrial, Work and Organizational Psychology Research and Practice” presents an overview of the issues of response distortion in personality measurement. It also provides a summary of the other articles published as part of this special issue addressing social desirability, impression management, self-presentation, response distortion, and faking in personality measurement in industrial, work, and organizational settings.

  10. Etkili Bir Halkla İlişkiler Aracı Olarak Sosyal Medya

    OpenAIRE

    aslan, mahmut mert

    2017-01-01

    Etkili Bir Halkla İlişkiler Aracı Olarak Sosyal MedyaÖZETDünyanın İnternet teknolojisi iletanışması, 90’lı yıllara rastlamaktadır. Sonradan mobil iletişim ile İnternetteknolojisinin bütünleşmesi, iletişimde mesafeleri ortadan kaldırmıştır. Çokgeçmeden bu yeniliklerin iş dünyasında ürünlerin tanıtım ve pazarlamasında biraraç olarak kullanılabileceği fikri ortaya atılmış olsa da, o dönemde bununilgililer tarafından dikkate alındığını söylemek pek mümkün değildir. Bununnedeni, olasılıkla, o döne...

  11. Corporate Social Responsibility in Buyer-Supplier Relationships: Is it Beneficial for Top-Tier Suppliers to Market their Capability to Ensure a Responsible Supply Chain?

    OpenAIRE

    Thomas Leppelt; Kai Foerstl; Evi Hartmann

    2013-01-01

    This study assesses how top-tier suppliers market their capabilities to ensure a responsible upstream supply chain to their downstream buyers, and how the marketing of corporate social responsibility (CSR)-related supply management practices affects the reputation of top-tier suppliers in business-to-business (B2B) markets. In a cross-functional multiple-case study involving marketing, purchasing, and sustainability executives of five supplier organizations in Central Europe, we explored four...

  12. Unveiling the Electromagnetic Responses of Fourfold Symmetric Metamaterials and Their Terahertz Sensing Capability

    Science.gov (United States)

    Chen, Chia-Yun; Yang, Yu-Hang; Yen, Ta-Jen

    2013-02-01

    We present the tailored terahertz responses via the hybridization of magnetic and electric resonators under normal incidence of electromagnetic wave. These cross-I sandwiched structures enable us to couple out the negative magnetic resonance followed by the effective inductance-capacitance (LC) circuit model, along with the negative electric response contributed by the excitation of diluted Drude metal resonance, thus allowing the realization of negative refraction index with a value of -2.3 at 4 THz. Furthermore, the cross-I sandwiched structures possess the compelling sensing performance based on their remarkable sensitivity and high-quality resonant behavior, holding great potential for practical applications in chemical/biological detection.

  13. Monolayers of gold nanostars with two Near-IR LSPR capable of additive photothermal response

    KAUST Repository

    Pallavicini, Piersandro

    2015-07-06

    Monolayers of photothermally responsive gold nanostars on PEI-coated surfaces display two Localized Surface Plasmon Resonances (LSPR) in the near-IR region that can be laser-irradiated either separately, obtaining two different T jumps, or simultaneously, obtaining a T jump equal to the sum of what obtained with separate irradiations

  14. An Evacuation Emergency Response Model Coupling Atmospheric Release Advisory Capability Output.

    Science.gov (United States)

    1983-01-10

    concentration contours coupled with the SMI evacuation model were calculated by using the MATHEW and ADPIC codes. The evacuation emergency response...2 M ATH EW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 2 ADPIC ...CDC 7600 computer within a matter of minutes MATHEW and ADPIC codes. These two models after the computer center is notified, are described briefly

  15. Assessment of the biological control capability of Hippodamia variegata (Col.: Coccinellidae) using functional response experiments

    DEFF Research Database (Denmark)

    Madadi, Hossein; Parizi, Emad Mohajeri; Allahyari, Hossein

    2011-01-01

    Lady beetles are among the most successful predators of aphids in different environments. The functional responses of different life stages of Hippodamia variegata (Goeze) towards cotton aphidswere examined in two different set-ups, a two-dimensional Petri dish set-up with detached leaves and a t...

  16. United We Stand, Divided We Fall: Increasing Response Capability in Kentucky through Regionalization and Leadership

    Science.gov (United States)

    2011-03-01

    made. This research will help national leaders to recognize the gap between the theory and practice. 13 II. LITERATURE REVIEW The following...throughout a region” (United States House of Representatives, 2004, p. 15). 1. Adaptive Leadership In “Complexity Leadership Theory : An Interactive...significant role in the ice storm response. Public health nurses worked in shelters; environmentalists were called upon to ensure that restaurants with

  17. Recycling of resting cells in the JB-1 ascites tumour after treatment with 1-beta-D-arabinofuranosylcytosine (ara-C).

    Science.gov (United States)

    Dombernowsky, P; Bichel, P

    1976-01-01

    Resting cells in tumours present a major problem in cancer chemotherapy. In the plateau phase of grwoth of the murine JB-1 ascites tumour (i.e. 10 days after 2-5 X 10(6) cells i.p.) large fractions of non-cycling cells with G1 and G2 DNA content (Q1 and Q2 cells) are present, and the fate of these resting cells was investigated after treatment with 1-beta-D-arabinofuranosylcytosine (Ara-C). The experimental work of growth curves, percentage of labelled mitoses curves after continuous labelling with 3H-TdR, and cytophotometric determination of single-cell DNA content in unlabelled tumour cells. Treatment with an i.p. single injection of Ara-C 200 mg/kg in the plateau JB-1 tumour resulted in a significant reduction in the number of tumour cells 1 and 2 days later as compared with untreated controls, while no difference in the number of tumour cells was observed after 3 days. In tumours prelabelled with 3H-TdR 24 hr before Ara-C treatment, a significant decrease in the percentage of labelled mitoses was observed 6-8 hr later followed by a return to the initial value after 12 hr, and a new pronounced fall from 20 hr after Ara-C. The second fall in the percentage of labelled mitoses disappeared when the labelling with 3H-TdR was continued also after Ara-C treatment. Cytophotometry of unlabelled tumour cells prelabelled for 24 hr with 3H-TdR before Ara-C treatment showed 20 hr after Ara-C a pronounced decrease in the fraction of Q1 cells paralleled by an increase in the fraction of unlabelled cells with S DNA content. The results indicate recycling of resting cells first with G2 and later with G1 DNA content, which contribute to the regrowth of the tumours.

  18. Understanding the Value of a Computer Emergency Response Capability for Nuclear Security

    Energy Technology Data Exchange (ETDEWEB)

    Gasper, Peter Donald [Idaho National Laboratory; Rodriguez, Julio Gallardo [Idaho National Laboratory

    2015-06-01

    The international nuclear community has a great understanding of the physical security needs relating to the prevention, detection, and response of malicious acts associated with nuclear facilities and radioactive material. International Atomic Energy Agency (IAEA) Nuclear Security Recommendations (INFCIRC_225_Rev 5) outlines specific guidelines and recommendations for implementing and maintaining an organization’s nuclear security posture. An important element for inclusion into supporting revision 5 is the establishment of a “Cyber Emergency Response Team (CERT)” focused on the international communities cybersecurity needs to maintain a comprehensive nuclear security posture. Cybersecurity and the importance of nuclear cybersecurity require that there be a specific focus on developing an International Nuclear CERT (NS-CERT). States establishing contingency plans should have an understanding of the cyber threat landscape and the potential impacts to systems in place to protect and mitigate malicious activities. This paper will outline the necessary components, discuss the relationships needed within the international community, and outline a process by which the NS-CERT identifies, collects, processes, and reports critical information in order to establish situational awareness (SA) and support decision-making

  19. Bird diversity in the Serra do Aracá region, northwestern Brazilian Amazon: preliminary check-list with considerations on biogeography and conservation

    Directory of Open Access Journals (Sweden)

    Sérgio Henrique Borges

    2014-08-01

    Full Text Available We inventoried the birds from Serra do Aracá region, state of Amazonas. The region encompasses a high diversity of vegetation types, including white sand forests and campinas, terra firme and flooded forests, montane forests and tepuis. We recorded 416 bird taxa in 69 families through captures with mist nets, tape recording of bird voices, and collection of voucher specimens. A large proportion of them (61% were recorded in a single vegetation type. Qualitative estimates suggest that approximately 580 bird species occur in the region. The avifauna of the Aracá region has a mixed biogeographic composition, with species typical of both margins of the Rio Negro occurring sympatrically. Additionally, species whose distributions are restricted to three areas of endemism for Amazonian birds (Imeri, Guiana and Pantepui were recorded in the region. Rare landscapes in the Brazilian Amazon are found in the Serra do Aracá region. Additionally, we recorded endemic and rare birds, highlighting the value of the region for conservation. The Serra do Aracá State Park officially protects montane forests, terra firme forests and tepuis. We suggest that the large extension of white sand campinas and igapó forests at the southern portion of Serra do Aracá should be also preserved in order to improve the representation of the rich natural heritage of the region.

  20. Corporate Social Responsibility in Buyer-Supplier Relationships: Is it Beneficial for Top-Tier Suppliers to Market their Capability to Ensure a Responsible Supply Chain?

    Directory of Open Access Journals (Sweden)

    Thomas Leppelt

    2013-11-01

    Full Text Available This study assesses how top-tier suppliers market their capabilities to ensure a responsible upstream supply chain to their downstream buyers, and how the marketing of corporate social responsibility (CSR-related supply management practices affects the reputation of top-tier suppliers in business-to-business (B2B markets. In a cross-functional multiple-case study involving marketing, purchasing, and sustainability executives of five supplier organizations in Central Europe, we explored four distinct approaches for marketing superior CSR management abilities in B2B markets that potentially foster long-term comparative advantages: (1 Fact-based communication of measurable CSR capabilities, (2 targeting of indirect customers and influencers, (3 marketing through education, and (4 marketing of CSR as a service. Moreover, our inductive results provide evidence that the effective marketing of CSR capabilities enhances a supplier’s reputation only if it sends consistent signals to the market. Therefore, a close integration of marketing and purchasing is crucial for achieving signaling consistency. Building on an established framework of purchasing-marketing integration in the particular context of CSR we developed a crossfunctional theory on the link between marketing, supply chain alignment and reputation, which is expressed in four sets of testable research propositions.

  1. Preparation and characterization of Kraft lignin-based moisture-responsive films with reversible shape-change capability.

    Science.gov (United States)

    Dallmeyer, Ian; Chowdhury, Sudip; Kadla, John F

    2013-07-08

    Preparation of moisture-responsive Kraft lignin-based materials by electrospinning blends of Kraft lignin fractions with different physical properties is presented. The differences in thermal mobility between lignin fractions are shown to influence the degree of interfiber fusion occurring during oxidative thermostabilization of electrospun nonwoven fabrics, resulting in different material morphologies including submicrometer fibers, bonded nonwovens, porous films, and smooth films. The relative amount of different lignin fractions and degree of fiber flow and fiber fusion is shown to influence the tendency for the electrospun materials to be transformed into moisture-responsive materials capable of reversible changes in shape. Material characterization by scanning electron microscopy and atomic force microscopy as well characterization of the chemical and physical properties of Kraft lignin fractions by dynamic rheology, 1H and 13C NMR, and gel permeation chromatography combined with multiangle laser light scattering are presented. A proposed mechanism underlying moisture-responsiveness, shape change, and shape recovery is discussed based on the differences in chemical structure and physical properties of Kraft lignin fractions.

  2. [Isolation of filamentous fungi capable of enhancing sludge dewaterability and study of mechanisms responsible for the sludge dewaterability enhancement].

    Science.gov (United States)

    Zhou, Yu-Jun; Fu, Hao-Yi; Fan, Xian-Feng; Wang, Zhen-Yu; Zheng, Guan-Yu

    2015-02-01

    To study the influence of filamentous fungi on the sludge dewaterability is very significant for the development of biological treatment methods for enhancing sludge dewaterability. In this study, filamentous fungi capable of enhancing sludge dewaterability were isolated from sewage sludge and the related mechanisms responsible for the sludge dewaterability enhancement were investigated. A filamentous fungus Mucor circinelloides ZG-3 was successfully isolated from sludge, and sludge dewaterability could be drastically improved by this fungus. Further study revealed that the enhancement of sludge dewaterability was influenced by inoculation method, inoculum size and solid content of sludge. The optimal inoculation method was mycelia inoculation, the optimal inoculum size was 10%, and the optimal solid content of sludge was about 4%. Under the optimized conditions, the specific resistance to filtration (SRF) of sludge could be decreased by 75.1% after being treated by M. circinelloides ZG-3. After the treatment, the COD value of sludge supernatant was only 310 mg x L(-1), and the treated sludge still exhibited good settleability. During the treatment of sewage sludge by M. circinelloides ZG-3, the mechanisms responsible for the sludge dewaterability enhancement included the degradation of sludge extracellular polymeric substances (EPS) and the decrease of sludge pH. Therefore, the treatment of sewage sludge using M. circinelloides ZG-3 is a useful and novel method for sludge conditioning.

  3. Construction of a pulse-coupled dipole network capable of fear-like and relief-like responses

    Science.gov (United States)

    Lungsi Sharma, B.

    2016-07-01

    The challenge for neuroscience as an interdisciplinary programme is the integration of ideas among the disciplines to achieve a common goal. This paper deals with the problem of deriving a pulse-coupled neural network that is capable of demonstrating behavioural responses (fear-like and relief-like). Current pulse-coupled neural networks are designed mostly for engineering applications, particularly image processing. The discovered neural network was constructed using the method of minimal anatomies approach. The behavioural response of a level-coded activity-based model was used as a reference. Although the spiking-based model and the activity-based model are of different scales, the use of model-reference principle means that the characteristics that is referenced is its functional properties. It is demonstrated that this strategy of dissection and systematic construction is effective in the functional design of pulse-coupled neural network system with nonlinear signalling. The differential equations for the elastic weights in the reference model are replicated in the pulse-coupled network geometrically. The network reflects a possible solution to the problem of punishment and avoidance. The network developed in this work is a new network topology for pulse-coupled neural networks. Therefore, the model-reference principle is a powerful tool in connecting neuroscience disciplines. The continuity of concepts and phenomena is further maintained by systematic construction using methods like the method of minimal anatomies.

  4. Effects of Piper sarmentosum extract on the growth performance, antioxidant capability and immune response in weaned piglets.

    Science.gov (United States)

    Wang, D F; Zhou, L L; Zhou, H L; Hou, G Y; Zhou, X; Li, W

    2017-02-01

    The biological properties of Piper sarmentosum render it a potential substitute for antibiotics in livestock feed. This study evaluated the effects of P. sarmentosum extract (PSE) on the growth performance, antioxidant capability and immune response of weaned piglets. Eighty 21-d-old weaned piglets were selected and randomly allocated to one of four dietary treatments with five replicates of four pigs each. The dietary treatments consisted of a basal diet supplemented with 0 (T0), 50 (T50), 100 (T100) or 200 (T200) mg/kg PSE. The feeding trial lasted 4 weeks. The results revealed that the T50 group had the highest average daily gain (ADG) and average daily feed intake (ADFI) throughout the feeding trial (p < 0.05). Additionally, the T50 group had higher (p < 0.05) serum glutathione peroxidase activity (GSH-Px) and lower (p < 0.05) serum malondialdehyde (MDA) levels than the T0 group at 4 weeks post-weaning (p < 0.05). Serum levels of interleukin-1β (IL-1β) and tumour necrosis factor-α (TNF-α) decreased, while serum levels of interleukin-4 (IL-4), interleukin-10 (IL-10) and transforming growth factor-β (TGF-β) increased by PSE supplementation at 4 weeks post-weaning (p < 0.05). PSE supplementation upregulated the mRNA expression of IL-4, IL-10 and TGF-β and downregulated the mRNA expression of TNF-α, IL-1β and interleukin-6 (IL-6) in the ileal mucosal layer of piglets (p < 0.05). In summary, our study findings revealed that PSE supplementation improved the antioxidant capability, and reduced inflammation, which may be beneficial to weaned piglet health. Journal of Animal Physiology and Animal Nutrition © 2016 Blackwell Verlag GmbH.

  5. Capability Paternalism

    NARCIS (Netherlands)

    Claassen, R.J.G.

    2014-01-01

    A capability approach prescribes paternalist government actions to the extent that it requires the promotion of specific functionings, instead of the corresponding capabilities. Capability theorists have argued that their theories do not have much of these paternalist implications, since promoting c

  6. RECOVERY OF MURINE MYELOPOIESIS AFTER CYTOSTATIC REDUCTION BY ARA-C - EFFECT OF BACITRACIN-INDUCED CHANGES IN THE INTESTINAL MICROFLORA AND INFLUENCE OF TIMING

    NARCIS (Netherlands)

    DAENEN, S; GORIS, H; DEBOER, F; HALIE, MR; VANDERWAAIJ, D

    1991-01-01

    The influence of intestinal flora modulation by oral bacitracin on the recovery of myelopoiesis after Ara-C was studied in C3H/Law mice. Bacitracin resulted in a 3-5 log increase of Gram-negative bacteria and a 10-fold increase of the intestinal endotoxin concentration. Initiation of bacitracin befo

  7. Variable epitope libraries: new vaccine immunogens capable of inducing broad human immunodeficiency virus type 1-neutralizing antibody response.

    Science.gov (United States)

    Charles-Niño, Claudia; Pedroza-Roldan, Cesar; Viveros, Monica; Gevorkian, Goar; Manoutcharian, Karen

    2011-07-18

    The extreme antigenic variability of human immunodeficiency virus (HIV) leads to immune escape of the virus, representing a major challenge in the design of effective vaccine. We have developed a novel concept for immunogen construction based on introduction of massive mutations within the epitopes targeting antigenically variable pathogens and diseases. Previously, we showed that these immunogens carrying large combinatorial libraries of mutated epitope variants, termed as variable epitope libraries (VELs), induce potent, broad and long lasting CD8+IFN-γ+ T-cell response. Moreover, we demonstrated that these T cells recognize more than 50% of heavily mutated variants (5 out of 10 amino acid positions were mutated in each epitope variant) of HIV-1 gp120 V3 loop-derived cytotoxic T lymphocyte epitope (RGPGRAFVTI) in mice. The constructed VELs had complexities of 10000 and 12500 individual members, generated as plasmid DNA or as M13 phage display combinatorial libraries, respectively, and with structural composition RGPGXAXXXX or XGXGXAXVXI, where X is any of 20 natural amino acids. Here, we demonstrated that sera from mice immunized with these VELs are capable of neutralizing 5 out of 10 viral isolates from Tier 2 reference panel of subtype B envelope clones, including HIV-1 isolates which are known to be resistant to neutralization by several potent monoclonal antibodies, described previously. These data indicate the feasibility of the application of immunogens based on VEL concept as an alternative approach for the development of molecular vaccines against antigenically variable pathogens.

  8. Combination of interferon alpha with either Ara-C or ATRA in vitro reduces the selective action of interferon against CML CFU-GM.

    Science.gov (United States)

    Marley, S B; Davidson, R J; Goldman, J M; Gordon, M Y

    2000-08-01

    Although interferon (IFN)-alpha has no specific inhibitory effect on the plating efficiency of granulocyte-macrophage colony-forming cells (CFU-GM) from patients with chronic myeloid leukaemia (CML), it does selectively inhibit the replating ability (secondary colony formation) of CML CFU-GM. Thus, amplification of CFU-GM may be a target for IFN-alpha and other agents used in the treatment of CML. Here we examined whether cytarabine (Ara-C) or all-trans retinoic acid (ATRA) exert similar effects and whether they might in combination with IFN-alpha enhance its efficacy. We found that Ara-C preferentially inhibits the formation of CML CFU-GM compared to normal CFU-GM, but this inhibition was not increased by addition of IFN-alpha. When Ara-C was added to cultures containing IFN-alpha, the inhibition of replating by CML progenitors was abrogated. ATRA increased significantly the plating efficiency of normal CFU-GM. The addition of IFN-alpha to ATRA had no effect on CML or normal colony numbers. However, addition of ATRA to cultures containing IFN-alpha reversed the selective inhibition of CML CFU-GM replating seen in cultures containing IFN-alpha alone. In four IFN-alpha/Ara-C experiments, secondary CML patient-derived colonies were examined by fluorescence in situ hybridisation (FISH). All of them were Ph chromosome positive. No significant effects on CFU-GM production were observed when CML primitive haemopoietic progenitor cells were investigated in a delta (delta) assay. Thus we conclude that combining IFN-alpha with Ara-C or ATRA neutralises the effect of IFN-alpha on CML CFU-GM. This observation provides a rationale for treating patients with alternating courses of IFN-alpha and Ara-C or ATRA, rather than giving either of these two agents in combination with IFN-alpha.

  9. The adult pituitary shows stem/progenitor cell activation in response to injury and is capable of regeneration.

    Science.gov (United States)

    Fu, Qiuli; Gremeaux, Lies; Luque, Raul M; Liekens, Daisy; Chen, Jianghai; Buch, Thorsten; Waisman, Ari; Kineman, Rhonda; Vankelecom, Hugo

    2012-07-01

    The pituitary gland constitutes, together with the hypothalamus, the regulatory core of the endocrine system. Whether the gland is capable of cell regeneration after injury, in particular when suffered at adult age, is unknown. To investigate the adult pituitary's regenerative capacity and the response of its stem/progenitor cell compartment to damage, we constructed a transgenic mouse model to conditionally destroy pituitary cells. GHCre/iDTR mice express diphtheria toxin (DT) receptor after transcriptional activation by Cre recombinase, which is driven by the GH promoter. Treatment with DT for 3 d leads to gradual GH(+) (somatotrope) cell obliteration with a final ablation grade of 80-90% 1 wk later. The stem/progenitor cell-clustering side population promptly expands after injury, concordant with the immediate increase in Sox2(+) stem/progenitor cells. In addition, folliculo-stellate cells, previously designated as pituitary stem/progenitor cells and significantly overlapping with Sox2(+) cells, also increase in abundance. In situ examination reveals expansion of the Sox2(+) marginal-zone niche and appearance of remarkable Sox2(+) cells that contain GH. When mice are left after the DT-provoked lesion, GH(+) cells considerably regenerate during the following months. Double Sox2(+)/GH(+) cells are observed throughout the regenerative period, suggesting recovery of somatotropes from stem/progenitor cells, as further supported by 5-ethynyl-2'-deoxyuridine (EdU) pulse-chase lineage tracing. In conclusion, our study demonstrates that the adult pituitary gland holds regenerative competence and that tissue repair follows prompt activation and plausible involvement of the stem/progenitor cells.

  10. Capability ethics

    NARCIS (Netherlands)

    I.A.M. Robeyns (Ingrid)

    2012-01-01

    textabstractThe capability approach is one of the most recent additions to the landscape of normative theories in ethics and political philosophy. Yet in its present stage of development, the capability approach is not a full-blown normative theory, in contrast to utilitarianism, deontological

  11. Capability ethics

    NARCIS (Netherlands)

    I.A.M. Robeyns (Ingrid)

    2012-01-01

    textabstractThe capability approach is one of the most recent additions to the landscape of normative theories in ethics and political philosophy. Yet in its present stage of development, the capability approach is not a full-blown normative theory, in contrast to utilitarianism, deontological theor

  12. Capability ethics

    NARCIS (Netherlands)

    I.A.M. Robeyns (Ingrid)

    2012-01-01

    textabstractThe capability approach is one of the most recent additions to the landscape of normative theories in ethics and political philosophy. Yet in its present stage of development, the capability approach is not a full-blown normative theory, in contrast to utilitarianism, deontological theor

  13. Dynamic capabilities

    DEFF Research Database (Denmark)

    Grünbaum, Niels Nolsøe; Stenger, Marianne

    2013-01-01

    it was dominated by a lack of systematism, assessment, monitoring, marketing speculations and feasibility calculation. Furthermore, the sphere was dictated by asymmetric supplier-customer relationships and negotiation power leading, among other possible factors, to meager profitability.......The consequences of dynamic capabilities (i.e. innovation performance and profitability) is an under researched area in the growing body of literature on dynamic capabilities and innovation management. This study aims to examine the relationship between dynamic capabilities, innovation performance...... and profitability of small and medium sized manufacturing enterprises operating in volatile environments. A multi-case study design was adopted as research strategy. The findings reveal a positive relationship between dynamic capabilities and innovation performance in the case companies, as we would expect. It was...

  14. Description of a PCR-based technique for DNA splicing and mutagenesis by producing 5' overhangs with run through stop DNA synthesis utilizing Ara-C

    Directory of Open Access Journals (Sweden)

    Silverman Mel

    2005-09-01

    Full Text Available Abstract Background Splicing of DNA molecules is an important task in molecular biology that facilitates cloning, mutagenesis and creation of chimeric genes. Mutagenesis and DNA splicing techniques exist, some requiring restriction enzymes, and others utilize staggered reannealing approaches. Results A method for DNA splicing and mutagenesis without restriction enzymes is described. The method is based on mild template-dependent polymerization arrest with two molecules of cytosine arabinose (Ara-C incorporated into PCR primers. Two rounds of PCR are employed: the first PCR produces 5' overhangs that are utilized for DNA splicing. The second PCR is based on polymerization running through the Ara-C molecules to produce the desired final product. To illustrate application of the run through stop mutagenesis and DNA splicing technique, we have carried out splicing of two segments of the human cofilin 1 gene and introduced a mutational deletion into the product. Conclusion We have demonstrated the utility of a new PCR-based method for carrying out DNA splicing and mutagenesis by incorporating Ara-C into the PCR primers.

  15. Capability approach

    DEFF Research Database (Denmark)

    Jensen, Niels Rosendal; Kjeldsen, Christian Christrup

    Lærebogen er den første samlede danske præsentation af den af Amartya Sen og Martha Nussbaum udviklede Capability Approach. Bogen indeholder en præsentation og diskussion af Sen og Nussbaums teoretiske platform. I bogen indgår eksempler fra såvel uddannelse/uddannelsespolitik, pædagogik og omsorg....

  16. ENTREPRENEURIAL CAPABILITIES

    DEFF Research Database (Denmark)

    Rasmussen, Lauge Baungaard; Nielsen, Thorkild

    2003-01-01

    The aim of this article is to analyse entrepreneurship from an action research perspective. What is entrepreneurship about? Which are the fundamental capabilities and processes of entrepreneurship? To answer these questions the article includes a case study of a Danish entrepreneur and his networks...

  17. Dynamic capabilities

    DEFF Research Database (Denmark)

    Grünbaum, Niels Nolsøe; Stenger, Marianne

    2013-01-01

    and profitability of small and medium sized manufacturing enterprises operating in volatile environments. A multi-case study design was adopted as research strategy. The findings reveal a positive relationship between dynamic capabilities and innovation performance in the case companies, as we would expect. It was...... it was dominated by a lack of systematism, assessment, monitoring, marketing speculations and feasibility calculation. Furthermore, the sphere was dictated by asymmetric supplier-customer relationships and negotiation power leading, among other possible factors, to meager profitability....

  18. Dual-mass vibratory rate gyroscope with suppressed translational acceleration response and quadrature-error correction capability

    Science.gov (United States)

    Clark, William A. (Inventor); Juneau, Thor N. (Inventor); Lemkin, Mark A. (Inventor); Roessig, Allen W. (Inventor)

    2001-01-01

    A microfabricated vibratory rate gyroscope to measure rotation includes two proof-masses mounted in a suspension system anchored to a substrate. The suspension has two principal modes of compliance, one of which is driven into oscillation. The driven oscillation combined with rotation of the substrate about an axis perpendicular to the substrate results in Coriolis acceleration along the other mode of compliance, the sense-mode. The sense-mode is designed to respond to Coriolis accelerationwhile suppressing the response to translational acceleration. This is accomplished using one or more rigid levers connecting the two proof-masses. The lever allows the proof-masses to move in opposite directions in response to Coriolis acceleration. The invention includes a means for canceling errors, termed quadrature error, due to imperfections in implementation of the sensor. Quadrature-error cancellation utilizes electrostatic forces to cancel out undesired sense-axis motion in phase with drive-mode position.

  19. Surviving the Storm : Expanding Public Health’s Capabilities in Response to the Increasing Threats Posed by Novel Viruses

    Science.gov (United States)

    2013-12-01

    www.fema.gov/pdf/emergency /nrf/National_Preparedness_Guidelines.pdf. 32 Jared Diamond , Guns, Germs, and Steel: The Fates of Human Societies (New York...originally published in 1939. As a journalist working in Denver, Colorado (in the fall of 1918), Ms. Porter fell ill with influenza and recounts in...lift her hand.37 Elsewhere in the literature are narratives from the healthcare workers responsible for the care of those like Ms. Porter who were

  20. Alizarin Complexone Functionalized Mesoporous Silica Nanoparticles: A Smart System Integrating Glucose-Responsive Double-Drugs Release and Real-Time Monitoring Capabilities.

    Science.gov (United States)

    Zou, Zhen; He, Dinggeng; Cai, Linli; He, Xiaoxiao; Wang, Kemin; Yang, Xue; Li, Liling; Li, Siqi; Su, Xiaoya

    2016-04-06

    The outstanding progress of nanoparticles-based delivery systems capable of releasing hypoglycemic drugs in response to glucose has dramatically changed the outlook of diabetes management. However, the developed glucose-responsive systems have not offered real-time monitoring capabilities for accurate quantifying hypoglycemic drugs released. In this study, we present a multifunctional delivery system that integrates both delivery and monitoring issues using glucose-triggered competitive binding scheme on alizarin complexone (ALC) functionalized mesoporous silica nanoparticles (MSN). In this system, ALC is modified on the surface of MSN as the signal reporter. Gluconated insulin (G-Ins) is then introduced onto MSN-ALC via benzene-1,4-diboronic acid (BA) mediated esterification reaction, where G-Ins not only blocks drugs inside the mesopores but also works as a hypoglycemic drug. In the absence of glucose, the sandwich-type boronate ester structure formed by BA binding to the diols of ALC and G-Ins remains intact, resulting in an fluorescence emission peak at 570 nm and blockage of pores. Following a competitive binding, the presence of glucose cause the dissociation of boronate ester between ALC and BA, which lead to the pores opening and disappearance of fluorescence. As proof of concept, rosiglitazone maleate (RSM), an insulin-sensitizing agent, was doped into the MSN to form a multifunctional MSN (RSM@MSN-ALC-BA-Ins), integrating with double-drugs loading, glucose-responsive performance, and real-time monitoring capability. It has been demonstrated that the glucose-responsive release behaviors of insulin and RSM in buffer or in human serum can be quantified in real-time through evaluating the changes of fluorescence signal. We believe that this developed multifunctional system can shed light on the invention of a new generation of smart nanoformulations for optical diagnosis, individualized treatment, and noninvasive monitoring of diabetes management.

  1. Responses of a novel salt-tolerant Streptomyces albidoflavus DUT_AHX capable of degrading nitrobenzene to salinity stress.

    Science.gov (United States)

    Ai, Haixin; Zhou, Jiti; Lu, Hong; Guo, Jianbo

    2009-02-01

    A novel salt-tolerant strain DUT_AHX, which was capable of utilizing nitrobenzene (NB) as the sole carbon source, was isolated from NB-contaminated soil. Furthermore, it was identified as Streptomyces albidoflavus on the basis of physiological and biochemical tests and 16S ribosomal DNA (rDNA) sequence analysis. It can grow in the presence of NaCl up to 12% (w/v) or NB up to 900 mg/l in mineral salts basal (MSB) medium. The exogenously added osmoprotectants such as glycin, glutamic acid, proline, betaine and ectoine can improve growth of strain DUT_AHX in the presence of 10% (w/v) NaCl. NB-grown cells of strain DUT_AHX in modified MSB medium can degrade NB with the concomitant release of ammonia. Moreover, crude extracts of NB-grown strain DUT_AHX mainly contained 2-aminophenol 1,6-dioxygenase activity. These indicate that NB degradation by strain DUT_AHX might involve a partial reductive pathway. The proteins induced by salinity stress or NB were analyzed by native-gradient polyacrylamide gel electrophoresis (PAGE) and sodium dodecyl sulfate (SDS)-PAGE. In NB-induced proteins de novo, 141 kDa protein on the native-gradient PAGE gel was excised and electroeluted. Furthermore, enzyme tests exhibit the 2-aminophenol 1,6-dioxygenase activity of purified 141 kDa protein is 11-fold that of the cell-free extracts. The exploitation of strain DUT_AHX in salinity stress will be a remarkable improvement in NB bioremediation and wastewater treatment in high salinity.

  2. Modification of the cerebral perfusion during a chemotherapy by arabinoside cytosine (A.R.A.C.) among patients suffering of an acute myelo-blastic leukemia (A.M.L.); Modification de la perfusion cerebrale au cours d'une chimiotherapie par cytosine arabinoside (ARAC) chez les patients atteints d'une leucemie aigue myeloblastique (LAM)

    Energy Technology Data Exchange (ETDEWEB)

    Modzelewski, R.; Vera, P. [Universite de Medecine de Rouen, QUANT.I.F-LITIS EA4108, departement de medecine nucleaire, 76 (France); Lepretre, S.; Tilly, H. [Centre Henri-Becquerel, departement d' hematologie, 76 - Rouen (France); Martinaud, O.; Hannequin, D. [CHU de Rouen, departement de neurologie, 76 (France); Habert, M.O. [CHU de la Pitie-Salpetriere, departement de medecine nucleaire, 75 - Paris (France)

    2010-07-01

    Cytosine arabinoside in high doses is a major treatment in acute myelo-blastic leukemia (A.M.L.). This treatment leads to neurological complications in 3-16% of cases, but the EEG, CT or MRI are normal.This prospective study examines brain perfusion in single photon emission tomography (SPECT) for patients receiving high dose arabinoside cytosine (H.D. A.R.A.C.). The SPECT of perfusion with hexamethyl propylene amine oxime (H.M.P.A.O.) for patients suffering of A.M.L. allowed to show a reduction of perfusion at the cerebellum level, of the occipito-parietal cortex and thalami, after conventional doses of A.R.A.C., while the patients had not any neurological accidents. (N.C.)

  3. Myogenic-induced mesenchymal stem cells are capable of modulating the immune response by regulatory T cells

    Directory of Open Access Journals (Sweden)

    Sunyoung Joo

    2014-02-01

    Full Text Available Cell therapy for patients who have intractable muscle disorders may require highly regenerative cells from young, healthy allogeneic donors. Mesenchymal stem cells are currently under clinical investigation because they are known to induce muscle regeneration and believed to be immune privileged, thus making them suitable for allogeneic applications. However, it is unclear whether allogeneic and myogenic-induced mesenchymal stem cells retain their immunomodulatory characteristics. Therefore, our aim was to evaluate the effects of mesenchymal stem cell differentiation on the immune characteristics of cells in vitro. We investigated the immunologic properties of mesenchymal stem cells after myogenic induction. Mesenchymal stem cells were obtained from C57BL/6 mice and the C3H/10T1/2 murine mesenchymal stem cell line. Two different 5-aza-2′-deoxycytidine doses (0.5 and 3 µM were evaluated for their effects on mesenchymal stem cell skeletal myogenic differentiation potential, immune antigen expression, and mixed lymphocytic reactions. Using a mixed lymphocytic reaction, we determined the optimal splenocyte proliferation inhibition dose. The induction of regulatory T cells was markedly increased by the addition of 3 µM 5-aza-2′-deoxycytidine–treated mesenchymal stem cells. Myogenic-induced mesenchymal stem cells do not elicit alloreactive lymphocyte proliferative responses and are able to modulate immune responses. These findings support the hypothesis that myogenic-induced mesenchymal stem cells may be transplantable across allogeneic barriers.

  4. Effects of Control-Response Characteristics on the Capability of Helicopter for Use as a Gun Platform

    Science.gov (United States)

    Pegg, Robert J.; Connor, Andrew B.

    1960-01-01

    An investigation with a variable-stability helicopter was undertaken to ascertain the steadiness and ability to "hold on" to the target of a helicopter employed as a gun platform. Simulated tasks were per formed under differing flight conditions with the control-response characteristics of the helicopter varied for each task. The simulated gun-platform mission included: Variations of headings with respect to wind, constant altitude and "swing around" to a wind heading of 0 deg, and increases in altitude while performing a swing around to a wind heading of 0 deg. The results showed that increases in control power and damping increased pilot ability to hold on to the target with fewer yawing oscillations and in a shorter time. The results also indicated that wind direction must be considered in accuracy assessment. Greatest accuracy throughout these tests was achieved by aiming upwind.

  5. Un nuevo catálogo pictórico del Quattrocento italiano: la tabla de Camerino y el desaparecido ciclo jacobeo de Giovenale de Orvieto en Araceli

    Directory of Open Access Journals (Sweden)

    Vázquez Santos, Rosa

    2008-06-01

    Full Text Available This study proposes a combined solution to two problems: the attribution of an altar panel from the Museo Diocesano of Camerino and the hagiography of the mysterious “miracle of the knight covered with shells” in this painting. The documentary sources related to the art, cult and iconography of Saint James the Great in Rome, in particular the descriptive work of Miguel Erce Jiménez, allow us to connect this panel with the lost altarpiece in Santa Maria Araceli by Giovenale of Orvieto, thus becoming the first picture in his catalogue. At the same time, these sources lead us to the Portuguese origin of the iconography of this miracle.

    El presente trabajo sugiere una solución conjunta a dos problemas: la atribución de una tabla del Museo Diocesano de Camerino y la hagiografía del misterioso “milagro del caballero cubierto de conchas” en ella representado. Las fuentes documentales relacionadas con la presencia de arte, culto e iconografía de Santiago el Mayor en la ciudad de Roma, principalmente la descriptiva obra de Miguel Erce Jiménez, nos permiten relacionar dicha tabla con el desaparecido retablo de Santa Maria de Araceli del pintor Giovenale de Orvieto, inaugurando el catálogo del artista. Al mismo tiempo las fuentes citadas nos llevan al origen portugués de la iconografía del milagro.

  6. Integrating social studies with mathematics through children’s literatureÇocuk edebiyatı aracılığıyla sosyal bilgilerin matematikle bütünleştirilmesi

    Directory of Open Access Journals (Sweden)

    İlhan İlter

    2014-11-01

    Full Text Available Teachers should take into account students’ natural dispositions in order that elementary school students can explore themselves and the world in which they live. In this respect, it is suggested that teachers should emphasize on students’ experiences such as inquiry, problem solving, recognizing time and behavior, making interdisciplinary connections by integrating curriculums through children’s literature. Integration of curriculum through children's books helps students develop complex structural ideas about social events and the nature of science. It also helps them make logical connections between concepts related to disciplines. Curriculum integration enables students to develop positive responses by providing them with meaningful learning experiences; therefore, it provides them countless colors. At this point, the integration of social studies with mathematics may provide collaborative contributions for students such as understanding their own world and making mathematical connections related to social events in real-life. Mathematics with social studies may help raising active citizens who use mathematics in social life by making deep connections between personal experiences and mathematical thinking. In the present study, the integration of social studies and mathematics through a specified sample of children's literature products has been analyzed. With this purpose, in the present study, the document analysis was used as a qualitative investigation method and content analysis technique was used in the analysis of data. According to the findings, the integration of social studies with mathematics is possible through children's literature. Özetİlköğretimde öğrencilerin kendilerini ve yaşadığı dünyayı keşfetmesi için öğretmenlerin onların doğal eğilimlerini dikkate alması gerekmektedir. Dolayısıyla öğretmenlerin çocuk edebiyatı aracılığıyla öğretim programları arasında bir bütünleşmeye giderek

  7. Emergency Medical Response Capability Analysis

    Science.gov (United States)

    1982-07-01

    Hospital Association American Pharmaceutical Association American Hospital Supply Corporation International Marketing Service Information on Disaster...Manufacturers Association o International Marketing Service o The Veterans Administration o The Department of Defense o Pharmaceutical Industry 32 C,, 9...Spain (I Conv) -2- M.inistero dell Interno Direzione Generale della Protezione Civile 00100 Rome, Italy (1 Copy) Directeur de la Protection Civile

  8. Campus Capability Plan

    Energy Technology Data Exchange (ETDEWEB)

    Adams, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Arsenlis, T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Bailey, A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Bergman, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Brase, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Brenner, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Camara, L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Carlton, H. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Cheng, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Chrzanowski, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Colson, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); East, D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Farrell, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Ferranti, L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Gursahani, A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hansen, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Helms, L. L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hernandez, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Jeffries, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Larson, D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Lu, K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); McNabb, D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Mercer, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Skeate, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Sueksdorf, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Zucca, B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Le, D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Ancria, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Scott, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Leininger, L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Gagliardi, F. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Gash, A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Bronson, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Chung, B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hobson, B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Meeker, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Sanchez, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Zagar, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Quivey, B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Sommer, S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Atherton, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-06-06

    Lawrence Livermore National Laboratory Campus Capability Plan for 2018-2028. Lawrence Livermore National Laboratory (LLNL) is one of three national laboratories that are part of the National Nuclear Security Administration. LLNL provides critical expertise to strengthen U.S. security through development and application of world-class science and technology that: Ensures the safety, reliability, and performance of the U.S. nuclear weapons stockpile; Promotes international nuclear safety and nonproliferation; Reduces global danger from weapons of mass destruction; Supports U.S. leadership in science and technology. Essential to the execution and continued advancement of these mission areas are responsive infrastructure capabilities. This report showcases each LLNL capability area and describes the mission, science, and technology efforts enabled by LLNL infrastructure, as well as future infrastructure plans.

  9. SAMHD1 is a biomarker for cytarabine response and a therapeutic target in acute myeloid leukemia.

    Science.gov (United States)

    Schneider, Constanze; Oellerich, Thomas; Baldauf, Hanna-Mari; Schwarz, Sarah-Marie; Thomas, Dominique; Flick, Robert; Bohnenberger, Hanibal; Kaderali, Lars; Stegmann, Lena; Cremer, Anjali; Martin, Margarethe; Lohmeyer, Julian; Michaelis, Martin; Hornung, Veit; Schliemann, Christoph; Berdel, Wolfgang E; Hartmann, Wolfgang; Wardelmann, Eva; Comoglio, Federico; Hansmann, Martin-Leo; Yakunin, Alexander F; Geisslinger, Gerd; Ströbel, Philipp; Ferreirós, Nerea; Serve, Hubert; Keppler, Oliver T; Cinatl, Jindrich

    2017-02-01

    The nucleoside analog cytarabine (Ara-C) is an essential component of primary and salvage chemotherapy regimens for acute myeloid leukemia (AML). After cellular uptake, Ara-C is converted into its therapeutically active triphosphate metabolite, Ara-CTP, which exerts antileukemic effects, primarily by inhibiting DNA synthesis in proliferating cells. Currently, a substantial fraction of patients with AML fail to respond effectively to Ara-C therapy, and reliable biomarkers for predicting the therapeutic response to Ara-C are lacking. SAMHD1 is a deoxynucleoside triphosphate (dNTP) triphosphohydrolase that cleaves physiological dNTPs into deoxyribonucleosides and inorganic triphosphate. Although it has been postulated that SAMHD1 sensitizes cancer cells to nucleoside-analog derivatives through the depletion of competing dNTPs, we show here that SAMHD1 reduces Ara-C cytotoxicity in AML cells. Mechanistically, dGTP-activated SAMHD1 hydrolyzes Ara-CTP, which results in a drastic reduction of Ara-CTP in leukemic cells. Loss of SAMHD1 activity-through genetic depletion, mutational inactivation of its triphosphohydrolase activity or proteasomal degradation using specialized, virus-like particles-potentiates the cytotoxicity of Ara-C in AML cells. In mouse models of retroviral AML transplantation, as well as in retrospective analyses of adult patients with AML, the response to Ara-C-containing therapy was inversely correlated with SAMHD1 expression. These results identify SAMHD1 as a potential biomarker for the stratification of patients with AML who might best respond to Ara-C-based therapy and as a target for treating Ara-C-refractory AML.

  10. Capability of 2 gait measures for detecting response to gait training in stroke survivors: Gait Assessment and Intervention Tool and the Tinetti Gait Scale.

    Science.gov (United States)

    Zimbelman, Janice; Daly, Janis J; Roenigk, Kristen L; Butler, Kristi; Burdsall, Richard; Holcomb, John P

    2012-01-01

    To characterize the performance of 2 observational gait measures, the Tinetti Gait Scale (TGS) and the Gait Assessment and Intervention Tool (G.A.I.T.), in identifying improvement in gait in response to gait training. In secondary analysis from a larger study of multimodal gait training for stroke survivors, we measured gait at pre-, mid-, and posttreatment according to G.A.I.T. and TGS, assessing their capability to capture recovery of coordinated gait components. Large medical center. Cohort of stroke survivors (N=44) greater than 6 months after stroke. All subjects received 48 sessions of a multimodal gait-training protocol. Treatment consisted of 1.5 hours per session, 4 sessions per week for 12 weeks, receiving these 3 treatment aspects: (1) coordination exercise, (2) body weight-supported treadmill training, and (3) overground gait training, with 46% of subjects receiving functional electrical stimulation. All subjects were evaluated with the G.A.I.T. and TGS before and after completing the 48-session intervention. An additional evaluation was performed at midtreatment (after session 24). For the total subject sample, there were significant pre-/post-, pre-/mid-, and mid-/posttreatment gains for both the G.A.I.T. and the TGS. According to the G.A.I.T., 40 subjects (91%) showed improved scores, 2 (4%) no change, and 2 (4%) a worsening score. According to the TGS, only 26 subjects (59%) showed improved scores, 16 (36%) no change, and 1 (2%) a worsening score. For 1 treatment group of chronic stroke survivors, the TGS failed to identify a significant treatment response to gait training, whereas the G.A.I.T. measure was successful. The G.A.I.T. is more sensitive than the TGS for individual patients and group treatment response in identifying recovery of volitional control of gait components in response to gait training. Copyright © 2012 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

  11. Non structural protein of avian influenza A (H11N1 virus is a weaker suppressor of immune responses but capable of inducing apoptosis in host cells

    Directory of Open Access Journals (Sweden)

    Mukherjee Sanjay

    2012-08-01

    Full Text Available Abstract Background The Non-Structural (NS1 protein of Influenza A viruses is an extensively studied multifunctional protein which is commonly considered as key viral component to fight against host immune responses. Even though there has been a lot of studies on the involvement of NS1 protein in host immune responses there are still ambiguities regarding its role in apoptosis in infected cells. Interactions of NS1 protein with host factors, role of NS1 protein in regulating cellular responses and apoptosis are quite complicated and further studies are still needed to understand it completely. Results NS1 genes of influenza A/Chicken/India/WBNIV2653/2008 (H5N1 and A/Aquatic bird/India/NIV-17095/2007(H11N1 were cloned and expressed in human embryonic kidney (293T cells. Microarray based approach to study the host cellular responses to NS1 protein of the two influenza A viruses of different pathogenicity showed significant differences in the host gene expression profile. NS1 protein of H5N1 resulted in suppression of IFN-β mediated innate immune responses, leading to down-regulation of the components of JAK-STAT pathway like STAT1 which further suppressed the expression of pro-inflammatory cytokines like CXCL10 and CCL5. The degree of suppression of host immune genes was found considerable with NS1 protein of H11N1 but was not as prominent as with H5N1-NS1. TUNEL assay analyses were found to be positive in both the NS1 transfected cells indicating both H5N1 as well as H11N1 NS1 proteins were able to induce apoptosis in transfected cells. Conclusions We propose that NS1 protein of both H5N1 and H11N1 subtypes of influenza viruses are capable of influencing host immune responses and possess necessary functionality to support apoptosis in host cells. H11N1, a low pathogenic virus without any proven evidence to infect mammals, contains a highly potential NS1 gene which might contribute to greater virus virulence in different gene combinations.

  12. Elongation Factor Tu and Heat Shock Protein 70 Are Membrane-Associated Proteins from Mycoplasma ovipneumoniae Capable of Inducing Strong Immune Response in Mice.

    Science.gov (United States)

    Jiang, Fei; He, Jinyan; Navarro-Alvarez, Nalu; Xu, Jian; Li, Xia; Li, Peng; Wu, Wenxue

    2016-01-01

    Chronic non-progressive pneumonia, a disease that has become a worldwide epidemic has caused considerable loss to sheep industry. Mycoplasma ovipneumoniae (M. ovipneumoniae) is the causative agent of interstitial pneumonia in sheep, goat and bighorn. We here have identified by immunogold and immunoblotting that elongation factor Tu (EF-Tu) and heat shock protein 70 (HSP 70) are membrane-associated proteins on M. ovipneumonaiea. We have evaluated the humoral and cellular immune responses in vivo by immunizing BALB/c mice with both purified recombinant proteins rEF-Tu and rHSP70. The sera of both rEF-Tu and rHSP70 treated BALB/c mice demonstrated increased levels of IgG, IFN-γ, TNF-α, IL-12(p70), IL-4, IL-5 and IL-6. In addition, ELISPOT assay showed significant increase in IFN-γ+ secreting lymphocytes in the rHSP70 group when compared to other groups. Collectively our study reveals that rHSP70 induces a significantly better cellular immune response in mice, and may act as a Th1 cytokine-like adjuvant in immune response induction. Finally, growth inhibition test (GIT) of M. ovipneumoniae strain Y98 showed that sera from rHSP70 or rEF-Tu-immunized mice inhibited in vitro growth of M. ovipneumoniae. Our data strongly suggest that EF-Tu and HSP70 of M. ovipneumoniae are membrane-associated proteins capable of inducing antibody production, and cytokine secretion. Therefore, these two proteins may be potential candidates for vaccine development against M. ovipneumoniae infection in sheep.

  13. Comparison of estimation capabilities of response surface methodology (RSM with artificial neural network (ANN in lipase-catalyzed synthesis of palm-based wax ester

    Directory of Open Access Journals (Sweden)

    Salleh Abu

    2007-08-01

    Full Text Available Abstract Background Wax esters are important ingredients in cosmetics, pharmaceuticals, lubricants and other chemical industries due to their excellent wetting property. Since the naturally occurring wax esters are expensive and scarce, these esters can be produced by enzymatic alcoholysis of vegetable oils. In an enzymatic reaction, study on modeling and optimization of the reaction system to increase the efficiency of the process is very important. The classical method of optimization involves varying one parameter at a time that ignores the combined interactions between physicochemical parameters. RSM is one of the most popular techniques used for optimization of chemical and biochemical processes and ANNs are powerful and flexible tools that are well suited to modeling biochemical processes. Results The coefficient of determination (R2 and absolute average deviation (AAD values between the actual and estimated responses were determined as 1 and 0.002844 for ANN training set, 0.994122 and 1.289405 for ANN test set, and 0.999619 and 0.0256 for RSM training set respectively. The predicted optimum condition was: reaction time 7.38 h, temperature 53.9°C, amount of enzyme 0.149 g, and substrate molar ratio 1:3.41. The actual experimental percentage yield was 84.6% at optimum condition, which compared well to the maximum predicted value by ANN (83.9% and RSM (85.4%. The order of effective parameters on wax ester percentage yield were; respectively, time with 33.69%, temperature with 30.68%, amount of enzyme with 18.78% and substrate molar ratio with 16.85%, whereas R2 and AAD were determined as 0.99998696 and 1.377 for ANN, and 0.99991515 and 3.131 for RSM respectively. Conclusion Though both models provided good quality predictions in this study, yet the ANN showed a clear superiority over RSM for both data fitting and estimation capabilities.

  14. Mobile Test Capabilities

    Data.gov (United States)

    Federal Laboratory Consortium — The Electrical Power Mobile Test capabilities are utilized to conduct electrical power quality testing on aircraft and helicopters. This capability allows that the...

  15. Analysis of Japanese Patients Treated with or without Long-Term Epirubicin Plus Ara-C Intravesical Instillation Therapy for Low-Grade Superficial Bladder Cancer

    Directory of Open Access Journals (Sweden)

    Tomonori Kato

    2015-01-01

    Full Text Available The high incidence of tumor recurrence following transurethral resection (TUR represents a major problem encountered in the management of bladder cancer. This study examined the efficacy of intravesical chemotherapy in superficial bladder cancer. We retrospectively analyzed 90 Japanese cases with low-grade superficial transitional cell carcinoma (stage T1, grades 1 and 2 who were rendered tumor-free by TURBT (TUR of bladder tumor and who thereafter were treated with or without intravesical chemotherapy. Among them, instillation was terminated in 2 patients due to adverse effects (severe but reversible chemical cystitis. Remaining 88 patients were divided into 2 groups according to therapy: the TURBT-only group (n=46, defined as patients treated with TURBT alone, and the Instillation group (n=42, defined as patients treated with weekly intravesical instillation therapies using epirubicin plus Ara-C. Recurrence-free rate was significantly higher in the Instillation group than in the TURBT-only group (p=0.02, HR = 0.457. The 5-year recurrence-free rate was 58.5% for the Instillation group and 38.6% for the TURBT-only group. Our instillation schedule represents the most intensive regimen among previously reported therapies and resulted in a 54.3% decrease in incidence of tumor recurrence. We believe that the results of this study could provide useful information on management of bladder cancer.

  16. Dynamic capabilities, Marketing Capability and Organizational Performance

    Directory of Open Access Journals (Sweden)

    Adriana Roseli Wünsch Takahashi

    2017-01-01

    Full Text Available The goal of the study is to investigate the influence of dynamic capabilities on organizational performance and the role of marketing capabilities as a mediator in this relationship in the context of private HEIs in Brazil. As a research method we carried out a survey with 316 IES and data analysis was operationalized with the technique of structural equation modeling. The results indicate that the dynamic capabilities have influence on organizational performance only when mediated by marketing ability. The marketing capability has an important role in the survival, growth and renewal on educational services offerings for HEIs in private sector, and consequently in organizational performance. It is also demonstrated that mediated relationship is more intense for HEI with up to 3,000 students and other organizational profile variables such as amount of courses, the constitution, the type of institution and type of education do not significantly alter the results.

  17. Study on components of rapid response capabilities of emergency medicine supply%对应急药品供应快速响应能力构成要素的探讨

    Institute of Scientific and Technical Information of China (English)

    梁建军

    2014-01-01

    目的:探讨应急药品供应快速响应能力构成要素的概念框架和构建快速响应能力的建议。方法通过分析应急药品供应存在的问题,找出应急药品供应在时效性、准确性上的需求,以及快速响应能力方面的要求。结果形成应急药材供应快速响应能力的构成要素框架,包括快速决策指挥能力、快速实施能力、快速应变能力三部分。结论构建应急药品供应快速响应能力,需从岗位练兵、信息平台建设、药品抽组方案制定、专业队伍建设多方面着手。%Objective To propose conceptual framework for the components of rapid response capabilities of emergency medi -cine supply and suggestions of rapid response capabilities establishment .Methods The components framework of rapid response capa-bilities of emergency medicine supply was proposed by analyzing the problems of emergency medicine supply and locating the demand on the timeliness and accuracy of emergency medicine supply .Results Rapid response capabilities of emergency medicine supply in-clude rapid decision-making and commanding , rapid implementation and rapid adjusting .Conclusion We should proceed from post training, information platform developing , medicine standards making , professional team building and other aspects to construct rapid response capabilities of emergency medicine supply .

  18. Performance Characterization of a Novel Plasma Thruster to Provide a Revolutionary Operationally Responsive Space Capability with Micro- and Nano-Satellites

    Science.gov (United States)

    2011-03-24

    controllers. ............ 33 Figure 15. BPU -600 Host Simulator software interface. ................................................. 34 Figure 16...Figure 14. Xenon and krypton bottle and battery of four mass flow controllers. Power for the thruster and cathode were provided by a Busek BPU -600...supply, which was capable of 0-55 V and 0-55 A. Control of the PPU was achieved using Busek‘s BPU -600 Host Simulator, which was a LabView

  19. A new class of inhibitors of the AraC family virulence regulator Vibrio cholerae ToxT

    OpenAIRE

    Woodbrey, Anne K.; Onyango, Evans O.; Maria Pellegrini; Gabriela Kovacikova; Taylor, Ronald K.; Gordon W. Gribble; Jon Kull, F.

    2017-01-01

    Vibrio cholerae is responsible for the diarrheal disease cholera that infects millions of people worldwide. While vaccines protecting against cholera exist, and oral rehydration therapy is an effective treatment method, the disease will remain a global health threat until long-term solutions such as improved sanitation and access to clean water become widely available. Because of this, there is a pressing need for potent therapeutics that can either mitigate cholera symptoms, or act prophylac...

  20. Inhibitory effect of polyunsaturated fatty acids on apoptosis induced by etoposide, okadaic acid and AraC in Neuro2a cells

    Directory of Open Access Journals (Sweden)

    Tomizawa,Kazuhito

    2007-06-01

    Full Text Available Neuronal apoptosis is involved in neurodegenerative diseases such as Alzheimer's disease and Parkinson.s disease. An efficient means of preventing it remains to be found. Some n-3 polyunsaturated fatty acids (PUFAs such as docosahexaenoic acid (DHA, 22 : 6n-3 and eicosapentaenoic acid (EPA, 20 : 5n-3 have been reported to be protective against the neuronal apoptosis and neuronal degeneration seen after spinal cord injury (SCI [1]. However, it is unclear which kinds of PUFAs have the most potent ability to inhibit neuronal apoptosis and whether the simultaneous treatment of PUFAs inhibits the apoptosis. In the present study, we compared the abilities of various n-3- and n-6- PUFAs to inhibit the apoptosis induced after the administration of different apoptotic inducers, etoposide, okadaic acid, and AraC, in mouse neuroblastoma cells (Neuro2a. Preincubation with DHA (22 : 6n-3, eicosapentaenoic acid (EPA, 20 : 5n-3, alpha-linolenic acid (alpha-LNA, 18 : 3n-3, linoleic acid (LA, 18 : 2n-6, arachidonic acid (AA, 20 : 4n-3, and gamma-linolenic acid (gamma-LNA, 18 : 3n-6 significantly inhibited caspase-3 activity and LDH leakage but simultaneous treatment with the PUFAs had no effect on the apoptosis of Neuro2a cells. There were no significant differences of the anti-apoptotic eff ect among the PUFAs. These results suggest that PUFAs may not be effective for inhibiting neuronal cell death after acute and chronic neurodegenerative disorders. However, dietary supplementation with PUFAs may be beneficial as a potential means to delay the onset of the diseases and/or their rate of progression.

  1. Capabilities for Strategic Adaptation

    DEFF Research Database (Denmark)

    Distel, Andreas Philipp

    This dissertation explores capabilities that enable firms to strategically adapt to environmental changes and preserve competitiveness over time – often referred to as dynamic capabilities. While dynamic capabilities being a popular research domain, too little is known about what these capabilities...... empirical studies through the dynamic capabilities lens and develops propositions for future research. The second paper is an empirical study on the origins of firm-level absorptive capacity; it explores how organization-level antecedents, through their impact on individual-level antecedents, influence...... firms’ ability to absorb and leverage new knowledge. The third paper is an empirical study which conceptualizes top managers’ resource cognition as a managerial capability underlying firms’ resource adaptation; it empirically examines the performance implications of this capability and organizational...

  2. Evaluation of Emergency Response Capability in Urban Community%城市社区灾害应急准备能力评估

    Institute of Scientific and Technical Information of China (English)

    陈娟

    2013-01-01

    The emergencies mainly include natural disaster, sudden accident, public health emergency and social safety events in city. Especially, natural disaster frequently occurred, which cause great damage and loss of life. However, community would be the main support to endure various disasters, and evaluation of disaster emergency capability for readiness of urban community would contribute to decrease the loss of disaster and increase the comprehensive emergency capability for readiness. The evaluation index system of three-level structure model would be established to evaluate disaster emergency capability for readiness of urban community based on the principles of simplicity and practicality. Furthermore, expert scoring method would be employed to identify weight coefifcients of each index and multi-level fuzzy comprehensive model would be adopted to evaluate disaster emergency capability for readiness of urban community, which provides applicable evaluation index system and mathematical model.%城市面临的突发事件包括自然灾害、事故灾难、公共卫生事件、社会安全事件等。我国近年来自然灾害发生尤为频繁,造成巨大损失,而社区是各类事故灾害承受的主体。评估社区灾害应急准备能力对于降低伤害损失、提高综合应急准备能力具有重要意义。基于简单化和实用化原则,论文构建了二层三级评估城市社区灾害应急准备能力的评价指标体系,运用专家打分法确定各指标的权重系数,采用多层次模糊综合评判模型给出该方法的具体应用,为评估城市社区灾害应急准备能力提供了具有可操作性的评价指标体系和评判数学模型。

  3. Annual Report to The President and The Congress of the Advisory Panel to Assess Domestic Response Capabilities for Terrorism Involving Weapons of Mass Destruction (2nd). II. Toward a National Strategy for Combating Terrorism

    Science.gov (United States)

    2007-11-02

    1960s, when Egypt used chemical weapons during its involvement in the Yemeni civil war. At that time, Israel’s parliament, the Knesset, passed a law...gives a review of open source intelligence ( OSINT ). This includes local, national and international media reports and trends and milestones that have a...Domestic Response Capabilities for Terrorism Involving Weapons of Mass Destruction Terrorism Early Warning Group (TEW) OSINT Indications & Warning

  4. Building Service Provider Capabilities

    DEFF Research Database (Denmark)

    Brandl, Kristin; Jaura, Manya; Ørberg Jensen, Peter D.

    In this paper we study whether and how the interaction between clients and the service providers contributes to the development of capabilities in service provider firms. In situations where such a contribution occurs, we analyze how different types of activities in the production process...... of the services, such as sequential or reciprocal task activities, influence the development of different types of capabilities. We study five cases of offshore-outsourced knowledge-intensive business services that are distinguished according to their reciprocal or sequential task activities in their production...... process. We find that clients influence the development of human capital capabilities and management capabilities in reciprocally produced services. While in sequential produced services clients influence the development of organizational capital capabilities and management capital capabilities....

  5. Developing Alliance Capabilities

    DEFF Research Database (Denmark)

    Heimeriks, Koen H.; Duysters, Geert; Vanhaverbeke, Wim

    capability. However, empirical testing in this field is scarce and little is known as to what extent different learning mechanisms are indeed useful in advancing a firm's alliance capability. This paper analyzes to what extent intra-firm learning mechanisms help firms develop their alliance capability......This paper assesses the differential performance effects of learning mechanisms on the development of alliance capabilities. Prior research has suggested that different capability levels could be identified in which specific intra-firm learning mechanisms are used to enhance a firm's alliance....... Differential learning may explain in what way firms yield superior returns from their alliances in comparison to competitors. The empirical results show that different learning mechanisms have different performance effects at different stages of the alliance capability development process. The main lesson from...

  6. Dynamic Capabilities and Performance

    DEFF Research Database (Denmark)

    Wilden, Ralf; Gudergan, Siegfried P.; Nielsen, Bo Bernhard

    2013-01-01

    Dynamic capabilities are widely considered to incorporate those processes that enable organizations to sustain superior performance over time. In this paper, we argue theoretically and demonstrate empirically that these effects are contingent on organizational structure and the competitive...... are contingent on the competitive intensity faced by firms. Our findings demonstrate the performance effects of internal alignment between organizational structure and dynamic capabilities, as well as the external fit of dynamic capabilities with competitive intensity. We outline the advantages of PLS...

  7. A new class of inhibitors of the AraC family virulence regulator Vibrio cholerae ToxT

    Science.gov (United States)

    Woodbrey, Anne K.; Onyango, Evans O.; Pellegrini, Maria; Kovacikova, Gabriela; Taylor, Ronald K.; Gribble, Gordon W.; Kull, F. Jon

    2017-01-01

    Vibrio cholerae is responsible for the diarrheal disease cholera that infects millions of people worldwide. While vaccines protecting against cholera exist, and oral rehydration therapy is an effective treatment method, the disease will remain a global health threat until long-term solutions such as improved sanitation and access to clean water become widely available. Because of this, there is a pressing need for potent therapeutics that can either mitigate cholera symptoms, or act prophylactically to prevent the virulent effects of a cholera infection. Here we report the design, synthesis, and characterization of a set of compounds that bind and inhibit ToxT, the transcription factor that directly regulates the two primary V. cholerae virulence factors. Using the folded structure of the monounsaturated fatty acid observed in the X-ray structure of ToxT as a template, we designed ten novel compounds that inhibit the virulence cascade to a greater degree than any known inhibitor. Our findings provide a structural and functional basis for the development of viable antivirulence therapeutics that combat cholera and, potentially, other forms of bacterial pathogenic disease. PMID:28332578

  8. A new class of inhibitors of the AraC family virulence regulator Vibrio cholerae ToxT.

    Science.gov (United States)

    Woodbrey, Anne K; Onyango, Evans O; Pellegrini, Maria; Kovacikova, Gabriela; Taylor, Ronald K; Gribble, Gordon W; Kull, F Jon

    2017-03-23

    Vibrio cholerae is responsible for the diarrheal disease cholera that infects millions of people worldwide. While vaccines protecting against cholera exist, and oral rehydration therapy is an effective treatment method, the disease will remain a global health threat until long-term solutions such as improved sanitation and access to clean water become widely available. Because of this, there is a pressing need for potent therapeutics that can either mitigate cholera symptoms, or act prophylactically to prevent the virulent effects of a cholera infection. Here we report the design, synthesis, and characterization of a set of compounds that bind and inhibit ToxT, the transcription factor that directly regulates the two primary V. cholerae virulence factors. Using the folded structure of the monounsaturated fatty acid observed in the X-ray structure of ToxT as a template, we designed ten novel compounds that inhibit the virulence cascade to a greater degree than any known inhibitor. Our findings provide a structural and functional basis for the development of viable antivirulence therapeutics that combat cholera and, potentially, other forms of bacterial pathogenic disease.

  9. Computational fluid dynamics modeling for emergency preparedness and response

    Energy Technology Data Exchange (ETDEWEB)

    Lee, R.L.; Albritton, J.R.; Ermak, D.L.; Kim, J.

    1995-02-01

    Computational fluid dynamics (CFD) has (CFD) has played an increasing in the improvement of atmospheric dispersion modeling. This is because many dispersion models are now driven by meteorological fields generated from CFD models or, in numerical weather prediction`s terminology, prognostic models. Whereas most dispersion models typically involve one or a few scalar, uncoupled equations, the prognostic equations are a set of highly-couple equations whose solution requires a significant level of computational power. Recent advances in computer hardware and software have enabled modestly-priced, high performance, workstations to exhibit the equivalent computation power of some mainframes. Thus desktop-class machines that were limited to performing dispersion calculations driven by diagnostic wind fields may now be used to calculate complex flows using prognostic CFD models. The Release and Advisory Capability (ARAC) program at Lawrence Livermore National Laboratory (LLNL) has, for the past several years, taken advantage of the improvements in hardware technology to develop a national emergency response capability based on executing diagnostic models on workstations. Diagnostic models that provide wind fields are, in general, simple to implement, robust and require minimal time for execution. Because these models typically contain little physics beyond mass-conservation, their performance is extremely sensitive to the quantity and quality of input meteorological data and, in spite of their utility, can be applied with confidence to only modestly complex flows. We are now embarking on a development program to incorporate prognostic models to generate, in real-time, the meteorological fields for the dispersion models. In contrast to diagnostic models, prognostic models are physically-based and are capable of incorporating many physical processes to treat highly complex flow scenarios.

  10. Flex: RSRE's capability computer

    Science.gov (United States)

    Foster, J. M.

    The Flex capability based computer architecture is described. It supports a multilanguage environment, and compilers for ALGOL 168 and PASCAL exist; an Ada compiler is being completed. The idea of capabilities is used on backing store as well as main store, so that all kinds of structured object which can be held in main store can also be held on any of the packing stores with the same degree of protection. Capabilities are used across a network of Flex computers, so that capabilities for data in one machine may be passed to and held in another. Flex uses true procedure values in the sense of Landin (1964).

  11. Integrated Process Capability Analysis

    Institute of Scientific and Technical Information of China (English)

    Chen; H; T; Huang; M; L; Hung; Y; H; Chen; K; S

    2002-01-01

    Process Capability Analysis (PCA) is a powerful too l to assess the ability of a process for manufacturing product that meets specific ations. The larger process capability index implies the higher process yield, a nd the larger process capability index also indicates the lower process expected loss. Chen et al. (2001) has applied indices C pu, C pl, and C pk for evaluating the process capability for a multi-process product wi th smaller-the-better, larger-the-better, and nominal-the-best spec...

  12. Evaluate the capability and accuracy of response-2000 program in prediction of the shear capacities of reinforced and prestressed concrete members

    Directory of Open Access Journals (Sweden)

    Ibrahim M. Metwally

    2012-08-01

    Member response analysis and sectional analysis were both used in Response-2000 to predict the behavior of the beams. Member response calculates the full member behavior including the deflection and curvature along the member length, as well as predicted failure modes. The analysis was performed by specifying the length subjected to shear and any constant moment region. Response-2000 provided a very good prediction of experimental behavior when compared to a database of 534 beams tested in shear. These include prestressed and reinforced sections, very large footing-like sections, sections made with very high strength concrete and elements with unusual geometry. All are predicted well. The results include that Response-2000 can predict the failure shear with an average experimental over predicted shear ratio of 1.05 with a coefficient of variation of 12%. This compares favorably to the ACI 318-08 [2] Code prediction ratios that have an average of 1.20 and a coefficient of variation of 32%.

  13. New meteorological data assimilation model for real-time emergency response

    Energy Technology Data Exchange (ETDEWEB)

    Sugiyama, G.; Chan, S.T.

    1997-09-01

    We are developing a new meteorological data assimilation model for the Atmospheric Release Advisory Capability (ARAC) project at Lawrence Livermore National Laboratory, which provides real-time dose assessments of airborne pollutant releases. The model, ADAPT (Atmospheric Data Assimilation and Parameterization Techniques), builds three-dimensional meteorological fields, which can be used to drive dispersion models or to initialize or evaluate mesoscale models. ADAPT incorporates many new features and substantial improvements over the current ARAC operational models MEDIC/MATHEW, including the use of continuous-terrain variable-resolution grids, the ability to treat assorted meteorological data such as temperatures, pressure, and relative humidity, and a new algorithm to produce mass-consistent wind fields. In this paper, we will describe the main features of the model, current work on a new atmospheric stability parameterization, and show example results.

  14. Analysis of Capabilities of Organizations in the Areas of Responsibility for U.S. Commands of the United States Navy to Humanitarian Assistance and Disaster Relief

    Science.gov (United States)

    2015-09-30

    financing 5. Health information management 6. Leadership and coordination Essential Health Service 1. Prioritizing health service 2. Communicable disease ...prevention 3. Communicable disease diagnosis and case management 4. Outbreak detection and response 5. Prevention of vaccine-preventable disease ...85.2 Child Fund International 252 254 208 81.8 Norwegian Refugee Council 222 226 222 98.1 Children

  15. Telematics Options and Capabilities

    Energy Technology Data Exchange (ETDEWEB)

    Hodge, Cabell [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-09-05

    This presentation describes the data tracking and analytical capabilities of telematics devices. Federal fleet managers can use the systems to keep their drivers safe, maintain a fuel efficient fleet, ease their reporting burden, and save money. The presentation includes an example of how much these capabilities can save fleets.

  16. RACLETTE: a model for evaluating the thermal response of plasma facing components to slow high power plasma transients. Part I: Theory and description of model capabilities

    Science.gov (United States)

    Raffray, A. René; Federici, Gianfranco

    1997-04-01

    RACLETTE (Rate Analysis Code for pLasma Energy Transfer Transient Evaluation), a comprehensive but relatively simple and versatile model, was developed to help in the design analysis of plasma facing components (PFCs) under 'slow' high power transients, such as those associated with plasma vertical displacement events. The model includes all the key surface heat transfer processes such as evaporation, melting, and radiation, and their interaction with the PFC block thermal response and the coolant behaviour. This paper represents part I of two sister and complementary papers. It covers the model description, calibration and validation, and presents a number of parametric analyses shedding light on and identifying trends in the PFC armour block response to high plasma energy deposition transients. Parameters investigated include the plasma energy density and deposition time, the armour thickness and the presence of vapour shielding effects. Part II of the paper focuses on specific design analyses of ITER plasma facing components (divertor, limiter, primary first wall and baffle), including improvements in the thermal-hydraulic modeling required for better understanding the consequences of high energy deposition transients in particular for the ITER limiter case.

  17. Postmodern Dönemde Ontolojik Anlam Aracı Olarak Dinî Kimlik Religious İdentity as Means of Ontological Meaning in Postmodern Period

    Directory of Open Access Journals (Sweden)

    Erol ERKAN

    2013-09-01

    Full Text Available First of all, identity is the source of meaning revealing the basic points related with the existence of human. İndividual defines and positions himself through ıdentity. In other words, identity is related with internalized insights that about what is meaningful for the person.Since the day of existence human has been in need of giving meaning tohis existence and positioning himself in the universe where he lives.Effort of human that giving meaning to himself and unirverse is one ofthe main features that separates him from other creatures. This effortwill continue as long as existence of human continued. In accordancewith this need, human had several attempts in the historical process.One of human’s effort that giving meaning to the existence is religion.Religion responded for these efforts of people especially in premodernperiod. But the presence of religion has been a matter of debate withmodernity and it was foreseen to be vanished in time. Althoughrelatively weakened, the impact of religion on society continued and asa reference of meaning and direction in today’s world; religion is stillexisting. Thus for today, religion has taken its place as an importantfactor for the formation of identity. Religion also has offered analternative identity in everyday life of individuals by allowing thatpositioning of themselves in different. Kimlik her şeyden önce insanın varlığıyla ilgili dayanak noktalarını açığa çıkaran anlam kaynağıdır. Birey kendini kimlik aracılığıyla tanımlar ve konumlandırır. Diğer bir ifadeyle kimlik, kişi için neyin anlamlı olduğuna dair içselleştirdiği anlayışlarla ilişkilidir. İnsan varolduğu günden buyana kendi varlığı ve içinde dünyaya geldiği evreni anlamlandırma ve kendisini konumlandırma gereksinimi duymuştur. İnsanın varlığı ve evreni anlamlandırma çabası onu diğer canlılardan ayıran temel özelliklerden biridir. İnsan varlığını sürdürdüğü s

  18. Capabilities for Strategic Adaptation

    DEFF Research Database (Denmark)

    Distel, Andreas Philipp

    organizational conditions, such as organizational design, support the emergence and performance of such capabilities. In detail, the dissertation consists of three self-contained research papers. The first paper is a systematic, multilevel review of the innovation literature; it reinterprets evidence from prior...... firms’ ability to absorb and leverage new knowledge. The third paper is an empirical study which conceptualizes top managers’ resource cognition as a managerial capability underlying firms’ resource adaptation; it empirically examines the performance implications of this capability and organizational...... empirical studies through the dynamic capabilities lens and develops propositions for future research. The second paper is an empirical study on the origins of firm-level absorptive capacity; it explores how organization-level antecedents, through their impact on individual-level antecedents, influence...

  19. Defence Capability Plan 2009

    Science.gov (United States)

    2009-01-01

    financed lease , or elements of both. Background Initially, an improved rotary wing training capability was to be provided under two projects – Phase 7A...Destroyer (AWD), Super Hornet and New Air Combat Capability (NACC). Through-life Support The Commonwealth seeks a ‘ turnkey ’ service providing aerial...combination: > Commercial- and/or Military-off-the-Shelf; or > open tender for ADF ownership or lease . Through-life Support Depending on the procurement (ADF

  20. Polarized light photography and videomicroscopy greatly enhance the capability of estimating the therapeuic response to a topical retinoid (adapalene) in acne vulgaris.

    Science.gov (United States)

    Rizova, E; Pagnoni, P A; Stoudemayer, T; Poncet, M; Kligman, A M

    2001-10-01

    Assessment of improvement in acne lesions following treatment is often based on clinical evaluation and photographs. However, limitations are associated with this sublective evaluation, making it difficult to accurately review individual acne lesions and to observe early response to therapy. Conventional photographs do not allow us to visualize small lesions, and it can be difficult to differentiate inflammatory lesions as papules or small nodules. Our objective was to evaluate a new standardized method for tracking individual acne lesions based on photographs. The effect of adapalene gel 0.1% on both inflammatory and noninflammatory acne lesions was evaluated using this technique. Polarized light photography and videomicroscopy were used to record the evolution of acne lesions over a 16-week period in 5 volunteers with moderate acne vulgaris. During the first 4 weeks before treatment, acne lesions were evaluated on a 3-times weekly basis to establish a pattern of progression and determine the length of time to resolution. Sebum secretion rates were monitored using Sebutape adhesive patches applied to the forehead and both cheeks for 1 hour. After 4 weeks, adapalene gel 0.1% was used once daily at bedtime for 8 weeks; polarized light photography, videomicroscopy, and assessment of sebum production followed treatment response. This treatment period was followed by a further 4-week phase, after which acne lesions and sebum secretion rates were evaluated. Our results showed that the new methodology was appropriate to track acne lesions and allowed an accurate and more oblective evaluation of individual lesions. Using this methodology demonstrated that adapalene gel 0.1% causes rapid resolution of inflammatory and noninflammatory lesions. The probability of clearing inflammatory and noninflamma tory lesions during the treatment period increased, and the probability of new lesions appearing decreased. Sebum secretion rates declined in patients while on study drug

  1. Dynamic contrast-enhanced perfusion area detector CT for non-small cell lung cancer patients: Influence of mathematical models on early prediction capabilities for treatment response and recurrence after chemoradiotherapy.

    Science.gov (United States)

    Ohno, Yoshiharu; Koyama, Hisanobu; Fujisawa, Yasuko; Yoshikawa, Takeshi; Seki, Shinichiro; Sugihara, Naoki; Sugimura, Kazuro

    2016-01-01

    To determine the capability and influence of the mathematical method on dynamic contrast-enhanced (CE-) perfusion area detector CT (ADCT) for early prediction of treatment response as well as progression free and overall survival (PFS and OS) of non-small cell lung cancer (NSCLC) patients treated with chemoradiotherapy. Sixty-six consecutive stage III NSCLC patients underwent dynamic CE-perfusion ADCT examinations, chemoradiotherapy and follow-up examinations. Response Evaluation Criteria in Solid Tumors (RECIST) criteria were used to divide all patients into responders and non-responders. Differences in each of the indices for all targeted lesions between measurements obtained 2 weeks prior to the first and the third course of chemotherapy were determined for all patients. ROC analyses were employed to determine the capability of perfusion indices as markers for distinguishing RECIST responders from non-responders. To evaluate their capability for early prediction of therapeutic effect, OS of perfusion index-based responders and non-responders were compared by using the Kaplan-Meier method followed by log-rank test. Area under the curve (Az) for total perfusion by means of the dual-input maximum slope method was significantly larger than that of pulmonary arterial perfusion using the same method (p=0.007) and of perfusion with the single-input maximum slope method (p=0.007). Mean OS demonstrated significantly difference between responder- and non-responder groups for total perfusion (p=0.02). Mathematical models have significant influence on assessment for early prediction of treatment response, disease progression and overall survival using dynamic CE-perfusion ADCT for NSCLC patients treated with chemoradiotherapy. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  2. Use of an operational model evaluation system for model intercomparison

    Energy Technology Data Exchange (ETDEWEB)

    Foster, K. T., LLNL

    1998-03-01

    The Atmospheric Release Advisory Capability (ARAC) is a centralized emergency response system used to assess the impact from atmospheric releases of hazardous materials. As part of an on- going development program, new three-dimensional diagnostic windfield and Lagrangian particle dispersion models will soon replace ARAC`s current operational windfield and dispersion codes. A prototype model performance evaluation system has been implemented to facilitate the study of the capabilities and performance of early development versions of these new models relative to ARAC`s current operational codes. This system provides tools for both objective statistical analysis using common performance measures and for more subjective visualization of the temporal and spatial relationships of model results relative to field measurements. Supporting this system is a database of processed field experiment data (source terms and meteorological and tracer measurements) from over 100 individual tracer releases.

  3. Structural Capability of an Organization toward Innovation Capability

    DEFF Research Database (Denmark)

    Nielsen, Susanne Balslev; Momeni, Mostafa

    2016-01-01

    competitive advantage in the organizations is the innovation capability. The innovation capability is associated with other organizational capabilities, and many organizations have focused on the need to identify innovation capabilities.This research focuses on recognition of the structural aspect...... of innovation capability and proposes a conceptual framework based on a Qualitative Meta Synthesis of academic literature on organizations innovation capability. This is proposed for the development of the concept of innovation capability in the organizations and this paper includes an expert based validation...... Capability and Structural Capability. Also, it offers the most important components and indices which directly influence and are related to the structural capability of innovation capability....

  4. Adaptive capability as indicated by behavioral and physiological responses, plasma HSP70 level, and PBMC HSP70 mRNA expression in Osmanabadi goats subjected to combined (heat and nutritional) stressors

    Science.gov (United States)

    Shilja, Shaji; Sejian, V.; Bagath, M.; Mech, A.; David, C. G.; Kurien, E. K.; Varma, Girish; Bhatta, Raghavendra

    2016-09-01

    A study was conducted to assess the impact of heat and nutritional stress simultaneously on the adaptive capability as indicated by behavioral and physiological responses, plasma heat shock protein 70 (HSP70) level, and peripheral blood mononuclear cells (PBMC) HSP70 gene expression in goats. Twenty-four adult Osmanabadi bucks (average body weight (BW) 16.0 kg) were used in the present study. The bucks were divided into four groups viz., C ( n = 6; control), HS ( n = 6; heat stress), NS ( n = 6; nutritional stress), and CS ( n = 6; combined stress). The study was conducted for a period of 45 days. C and HS bucks had ad libitum access to their feed while NS and CS bucks were under restricted feed (30 % intake of C bucks) to induce nutritional stress. The HS and CS bucks were exposed to solar radiation for 6 h a day between 10:00 a.m. and 4:00 p.m. to induce heat stress. The data was analyzed using repeated measures analysis of variance. The standing time differed significantly ( P adaptive capabilities of Osmanabadi bucks as compared to that would occur individually. Further, the study indicated that lying time, drinking frequency, RR, RT, plasma HSP70, and PBMC HSP70 gene expression may act as ideal biological markers for assessing the impact of CS on adaptive capabilities in bucks.

  5. Adaptive capability as indicated by endocrine and biochemical responses of Malpura ewes subjected to combined stresses (thermal and nutritional) in a semi-arid tropical environment

    Science.gov (United States)

    Sejian, Veerasamy; Maurya, Vijai P.; Naqvi, Sayeed M. K.

    2010-11-01

    A study was conducted to assess the effect of combined stresses (thermal and nutritional) on endocrine and biochemical responses in Malpura ewes. Twenty eight adult Malpura ewes (average body weight 33.56 kg) were used in the present study. The ewes were divided into four groups viz., GI ( n = 7; control), GII ( n = 7; thermal stress), GIII ( n = 7; nutritional stress) and GIV ( n = 7; combined stress). The animals were stall fed with a diet consisting of 60% roughage and 40% concentrate. GI and GII ewes were provided with ad libitum feeding while GIII and GIV ewes were provided with restricted feed (30% intake of GI ewes) to induce nutritional stress. GII and GIV ewes were kept in climatic chamber at 40°C and 55% RH for 6 h a day between 1000 hours and 1600 hours to induce thermal stress. The study was conducted for a period of two estrus cycles. The parameters studied were Hb, PCV, glucose, total protein, total cholesterol, ACP, ALP, cortisol, T4, T3, and insulin. Combined stress significantly ( P stress, nutritional stress had a less significant effect on the parameters studied. However, when both these stresses were coupled, they had a severe impact on all the parameters studied in these ewes. It can be concluded from this study that two stressors occurring simultaneously may impact severely on the biological functions necessary to maintain homeostasis in sheep.

  6. Pediatric residents experience a significant decline in their response capabilities to simulated life-threatening events as their training frequency in cardiopulmonary resuscitation decreases.

    Science.gov (United States)

    Roy, Kevin M; Miller, Michael P; Schmidt, Kathleen; Sagy, Mayer

    2011-05-01

    To determine the frequency of cardiopulmonary resuscitation education using high-fidelity patient simulators during pediatric residency training. Randomized controlled trial. Suburban tertiary care children's hospital residency training program. Twenty-four second year pediatric residents. Twenty-four second year pediatric residents were randomized into two study groups, 12 residents in each. Both groups completed a formal resuscitation training course utilizing lectures, skill stations, and six scenarios on high-fidelity patient stimulators. Group A was retested on three scenarios 4 months after training and group B was similarly retested 8 months after training. Time intervals from induction of a clinical problem to its definitive management were recorded for each resident. Residents were also asked to complete surveys following each episode of training and testing. The mean time intervals, for group A, to start effective bag mask ventilation and chest compressions in response to apnea and cardiac arrest were 17.75 secs (± 3.39 secs) and 23.42 secs (± 9.33 secs), respectively. These were significantly shorter than 32.7 secs (± 18.6 secs) and 81.2 secs (± 74.9 secs), for group B, respectively (p training, when compared to 4 months after training. These results may indicate that residents require more frequent training than currently recommended.

  7. Kokkos? Task DAG Capabilities.

    Energy Technology Data Exchange (ETDEWEB)

    Edwards, Harold C.; Ibanez, Daniel Alejandro

    2017-09-01

    This report documents the ASC/ATDM Kokkos deliverable "Production Portable Dy- namic Task DAG Capability." This capability enables applications to create and execute a dynamic task DAG ; a collection of heterogeneous computational tasks with a directed acyclic graph (DAG) of "execute after" dependencies where tasks and their dependencies are dynamically created and destroyed as tasks execute. The Kokkos task scheduler executes the dynamic task DAG on the target execution resource; e.g. a multicore CPU, a manycore CPU such as Intel's Knights Landing (KNL), or an NVIDIA GPU. Several major technical challenges had to be addressed during development of Kokkos' Task DAG capability: (1) portability to a GPU with it's simplified hardware and micro- runtime, (2) thread-scalable memory allocation and deallocation from a bounded pool of memory, (3) thread-scalable scheduler for dynamic task DAG, (4) usability by applications.

  8. Management Innovation Capabilities

    DEFF Research Database (Denmark)

    Harder, Mie

    Management innovation is the implementation of a new management practice, process, technique or structure that significantly alters the way the work of management is performed. This paper presents a typology categorizing management innovation along two dimensions; radicalness and complexity. Then......, the paper introduces the concept of management innovation capabilities which refers to the ability of a firm to purposefully create, extend and modify its managerial resource base to address rapidly changing environments. Drawing upon behavioral theory of the firm and the dynamic capabilities framework......, the paper proposes a model of the foundations of management innovation. Propositions and implications for future research are discussed....

  9. Sandia QIS Capabilities.

    Energy Technology Data Exchange (ETDEWEB)

    Muller, Richard P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-07-01

    Sandia National Laboratories has developed a broad set of capabilities in quantum information science (QIS), including elements of quantum computing, quantum communications, and quantum sensing. The Sandia QIS program is built atop unique DOE investments at the laboratories, including the MESA microelectronics fabrication facility, the Center for Integrated Nanotechnologies (CINT) facilities (joint with LANL), the Ion Beam Laboratory, and ASC High Performance Computing (HPC) facilities. Sandia has invested $75 M of LDRD funding over 12 years to develop unique, differentiating capabilities that leverage these DOE infrastructure investments.

  10. Capability Handbook- offline metrology

    DEFF Research Database (Denmark)

    Islam, Aminul; Marhöfer, David Maximilian; Tosello, Guido

    This offline metrological capability handbook has been made in relation to HiMicro Task 3.3. The purpose of this document is to assess the metrological capability of the HiMicro partners and to gather the information of all available metrological instruments in the one single document. It provides...... a quick overview of what is possible today by the state of the art, what the HiMicro consortium can do and what metrological requirements we have concerning the HiMicro industrial demonstrators....

  11. 社区儿童心理韧性与突发事件应急能力的关系%Relationship between Emergency Response Capability and Resilience of Children in Community

    Institute of Scientific and Technical Information of China (English)

    辛欣; 杜思怡; 刘堃; 高涵; 张林

    2015-01-01

    Objective To investigate the current situation of resilience and emergency response capability of children in communities of Jinzhou and to study the relationship between the resilience and emergency response capability of children in order to provide a reference for safety education of children. Methods Stratified cluster sampling was used to randomly select 450 students from grade four to six in communities in Jinzhou form May to July in 2013. Related literature was consulted to prepare the self- designed questionnaire on general information. Healthy Kids Resilience Assessment( HKRA, including focus, emotion control,active cognition,family support and interpersonal assistance)was used to evaluate the resilience of children,and emergency response capability questionnaire was used to evaluate the emergency response capability of children. A total of 450 questionnaires were distributed,47 invalid questionnaires were removed,and 403 questionnaires were returned,with an effective rate of 89. 6%. Results The total score and each dimension score of resilience of children with different sexes showed no statistically significant difference( P >0. 05 ) . The total score of resilience and scores of focus, emotion control, active cognition and family support of children in different grades showed no statistically significant difference(P>0. 05). The score of interpersonal assistance of children in different grades showed statistically significant difference( P<0. 05 ) . Compared with the children in both grade five and grade six, the score of interpersonal assistance of children in grade four showed statistically significant differences(t =1. 981,1. 962,P <0. 05). The score of emergency response capability of children with different sexes and different grades showed no statistically significant difference(t = -1. 140,F =0. 595,P =0. 542,0. 552). The scores of focus and active cognition were positively correlated with the score of emergency response capability(r=0. 142,0. 287

  12. Capabilities Composition (Briefing Charts)

    Science.gov (United States)

    2009-04-22

    and support , , processes (including ITIL v3) • Understanding of Governance is still evolving Engineering Acquisition and Operational Governance...L – Logistics • NC – Net-Centric • CPM – Capability Portfolio Management • ITIL v3 – Information Technology • ONR – Office of Naval Research

  13. Building server capabilities

    DEFF Research Database (Denmark)

    Adeyemi, Oluseyi

    -only”, exporting parts and components back to headquarter for sales in the home country. In the course of time, the role of offshore subsidiaries in a company’s operations network tends to change and, with that, the capabilities, of the subsidiaries. Focusing on Danish subsidiaries in China, the objective...

  14. Building Server Capabilities

    DEFF Research Database (Denmark)

    Adeyemi, Oluseyi

    2013-01-01

    -only”, exporting parts and components back to headquarter for sales in the home country. In the course of time, the role of offshore subsidiaries in a company’s operations network tends to change and, with that, the capabilities, of the subsidiaries. Focusing on Danish subsidiaries in China, the objective...

  15. Capabilities Report 2012

    Science.gov (United States)

    2012-01-01

    74 Biosurveillance - Rapid Identification of Unknown Microorganisms...RSI is dedicated to the effort and capabilities of enabling biosurveillance through coordinated and integrated national and international systems...natural, accidental, or deliberate in nature. These initiatives include: biosurveillance , outbreak recognition and avoidance, pathogen characterization

  16. Capabilities for Intercultural Dialogue

    Science.gov (United States)

    Crosbie, Veronica

    2014-01-01

    The capabilities approach offers a valuable analytical lens for exploring the challenge and complexity of intercultural dialogue in contemporary settings. The central tenets of the approach, developed by Amartya Sen and Martha Nussbaum, involve a set of humanistic goals including the recognition that development is a process whereby people's…

  17. Metrology Measurement Capabilities

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Glen E. Gronniger

    2007-10-02

    This document contains descriptions of Federal Manufacturing & Technologies (FM&T) Metrology capabilities, traceability flow charts, and the measurement uncertainty of each measurement capability. Metrology provides NIST traceable precision measurements or equipment calibration for a wide variety of parameters, ranges, and state-of-the-art uncertainties. Metrology laboratories conform to the requirements of the Department of Energy Development and Production Manual Chapter 13.2, ANSI/ISO/IEC ANSI/ISO/IEC 17025:2005, and ANSI/NCSL Z540-1. FM&T Metrology laboratories are accredited by NVLAP for the parameters, ranges, and uncertainties listed in the specific scope of accreditation under NVLAP Lab code 200108-0. See the Internet at http://ts.nist.gov/Standards/scopes/2001080.pdf. These parameters are summarized. The Honeywell Federal Manufacturing & Technologies (FM&T) Metrology Department has developed measurement technology and calibration capability in four major fields of measurement: (1) Mechanical; (2) Environmental, Gas, Liquid; (3) Electrical (DC, AC, RF/Microwave); and (4) Optical and Radiation. Metrology Engineering provides the expertise to develop measurement capabilities for virtually any type of measurement in the fields listed above. A strong audit function has been developed to provide a means to evaluate the calibration programs of our suppliers and internal calibration organizations. Evaluation includes measurement audits and technical surveys.

  18. ISOPHOT - Capabilities and performance

    DEFF Research Database (Denmark)

    Lemke, D.; Klaas, U.; Abolins, J.

    1996-01-01

    ISOPHOT covers the largest wavelength range on ISO from 2.5 to 240 mu m. Its scientific capabilities include multi filter and multi-aperture photometry, polarimetry, imaging and spectrophotometry. All modes can optionally include a focal plane chopper. The backbone of the photometric calibration...

  19. Capabilities for Intercultural Dialogue

    Science.gov (United States)

    Crosbie, Veronica

    2014-01-01

    The capabilities approach offers a valuable analytical lens for exploring the challenge and complexity of intercultural dialogue in contemporary settings. The central tenets of the approach, developed by Amartya Sen and Martha Nussbaum, involve a set of humanistic goals including the recognition that development is a process whereby people's…

  20. The Capability Approach

    NARCIS (Netherlands)

    I.A.M. Robeyns (Ingrid)

    2011-01-01

    textabstract In its most general description, the capability approach is a flexible and multi-purpose normative framework, rather than a precise theory of well-being, freedom or justice. At its core are two normative claims: first, the claim that the freedom to achieve well-being is of primary mora

  1. Capitalizing on capabilities.

    Science.gov (United States)

    Ulrich, Dave; Smallwood, Norm

    2004-06-01

    By making the most of organizational capabilities--employees' collective skills and fields of expertise--you can dramatically improve your company's market value. Although there is no magic list of proficiencies that every organization needs in order to succeed, the authors identify 11 intangible assets that well-managed companies tend to have: talent, speed, shared mind-set and coherent brand identity, accountability, collaboration, learning, leadership, customer connectivity, strategic unity, innovation, and efficiency. Such companies typically excel in only three of these capabilities while maintaining industry parity in the other areas. Organizations that fall below the norm in any of the 11 are likely candidates for dysfunction and competitive disadvantage. So you can determine how your company fares in these categories (or others, if the generic list doesn't suit your needs), the authors explain how to conduct a "capabilities audit," describing in particular the experiences and findings of two companies that recently performed such audits. In addition to highlighting which intangible assets are most important given the organization's history and strategy, this exercise will gauge how well your company delivers on its capabilities and will guide you in developing an action plan for improvement. A capabilities audit can work for an entire organization, a business unit, or a region--indeed, for any part of a company that has a strategy to generate financial or customer-related results. It enables executives to assess overall company strengths and weaknesses, senior leaders to define strategy, midlevel managers to execute strategy, and frontline leaders to achieve tactical results. In short, it helps turn intangible assets into concrete strengths.

  2. Metrology Measurement Capabilities

    Energy Technology Data Exchange (ETDEWEB)

    Barnes, L.M.

    2000-03-23

    This document contains descriptions of Federal Manufacturing and Technologies (FM and T) Metrology capabilities, traceability flow charts, and the measurement uncertainty of each measurement capability. Metrology provides NIST traceable precision measurements or equipment calibration for a wide variety of parameters, ranges, and state-of-the-art uncertainties in laboratories that conform to the requirements of the Department of Energy Development and Production Manual Chapter 8.4, and ANSI/NCSL Z540-1 (equivalent to ISO Guide 25). FM and T Metrology laboratories are accredited by NVLAP for the parameters, ranges, and uncertainties listed in the specific scope of accreditation under NVLAP Lab code 200108-0. These parameters are summarized.

  3. Metrology Measurement Capabilities

    Energy Technology Data Exchange (ETDEWEB)

    Barnes, L.M.

    2003-11-12

    This document contains descriptions of Federal Manufacturing & Technologies (FM&T) Metrology capabilities, traceability flow charts, and the measurement uncertainty of each measurement capability. Metrology provides NIST traceable precision measurements or equipment calibration for a wide variety of parameters, ranges, and state-of-the-art uncertainties. Metrology laboratories conform to the requirements of the Department of Energy Development and Production Manual Chapter 8.4, ANSI/ISO/IEC ANSI/ISO/IEC 17025:2000, and ANSI/NCSL Z540-1 (equivalent to ISO Guide 25). FM&T Metrology laboratories are accredited by NVLAP for the parameters, ranges, and uncertainties listed in the specific scope of accreditation under NVLAP Lab code 200108-0. See the Internet at http://ts.nist.gov/ts/htdocs/210/214/scopes/2001080.pdf. These parameters are summarized in the table at the bottom of this introduction.

  4. Capabilities and Special Needs

    DEFF Research Database (Denmark)

    Kjeldsen, Christian Christrup

    thesis deals with a new Danish innovative policy (Act. no. 564 of 2007), a social work and educational intervention for mentally challenged Young people and other young people with special needs, the so-called individually arranged youth education (STU). The investigated area has lately been taken......The author, Christian Christrup Kjeldsen, presents a comprehensive capability-oriented study of high excellence. For this work he has recieved the doctor titel Dr.phil (Doktor der Philosophie) from Bielefeld University, Germany 2013 with the highest possible grade "ausgezeichnet". The doctoral...... into international consideration in relation to the implementation of the UN convention on the rights of persons with disabilities. As for the theoretical basis, the research makes use of the sociological open-ended and relational concepts of Pierre Bourdieu and the normative yardstick of the Capability Approach...

  5. Capabilities and Special Needs

    DEFF Research Database (Denmark)

    Kjeldsen, Christian Christrup

    The author, Christian Christrup Kjeldsen, presents a comprehensive capability-oriented study of high excellence. For this work he has recieved the doctor titel Dr.phil (Doktor der Philosophie) from Bielefeld University, Germany 2013 with the highest possible grade "ausgezeichnet". The doctoral...... thesis deals with a new Danish innovative policy (Act. no. 564 of 2007), a social work and educational intervention for mentally challenged Young people and other young people with special needs, the so-called individually arranged youth education (STU). The investigated area has lately been taken...... into international consideration in relation to the implementation of the UN convention on the rights of persons with disabilities. As for the theoretical basis, the research makes use of the sociological open-ended and relational concepts of Pierre Bourdieu and the normative yardstick of the Capability Approach...

  6. 77 FR 23161 - Onsite Emergency Response Capabilities

    Science.gov (United States)

    2012-04-18

    ... Resources Defense Council (NRDC) in a petition for rulemaking (PRM), PRM-50-102 (76 FR 58165; September 20... recommendations in the NTTF Report, and the NRC determined that the issues raised in PRM-50-102 are appropriate... the NRC's actions on PRM-50-102 may follow the NRC's activities at www.regulations.gov by searching...

  7. 78 FR 1154 - Onsite Emergency Response Capabilities

    Science.gov (United States)

    2013-01-08

    ... 2011 Fukushima Dai-ichi Nuclear Power Plant accident in Japan. DATES: Submit comments by February 22... language related to this rulemaking as Appendix C of the draft regulatory basis. This preliminary proposed rule language contains one portion of the NRC's proposed changes. This language does not represent...

  8. Joint Forces Capabilities

    Science.gov (United States)

    2007-11-02

    for countering the proliferation of weapons of mass destruction (WMD) in space. The Space Operations Center ( SPOC ), USSPACECOM is the single point...of contact for assessing space capabilities. Combatant commanders, subordinate JFCs, and Services can access this information from the SPOC via the...special operations forces SPOC Space Operations Center SSBN fleet ballistic missile submarine SST space support team UJTL Universal Joint Task List UN

  9. Capabilities for innovation

    DEFF Research Database (Denmark)

    Nielsen, Peter; Nielsen, René Nesgaard; Bamberger, Simon Grandjean

    2012-01-01

    is a survey that collected information from 601 firms belonging to the private urban sector in Denmark. The survey was carried out in late 2010. Keywords: dynamic capabilities/innovation/globalization/employee/employer cooperation/Nordic model Acknowledgment: The GOPA study was financed by grant 20080053113....../12-2008-09 from the Foundation for Research of Work Environment, Denmark. The funders played no part in the conduct or reporting of the research....

  10. Zihin engelli birey için hazırlanan akran aracılı sosyal beceri öğretim programının etkiliğini incelenmesi

    Directory of Open Access Journals (Sweden)

    Elif Sazak Pınar

    2003-07-01

    Full Text Available Bu araştırmanın amacı, akran aracılı sosyal beceri öğretim programının, zihin engelli öğrencinin “kendini tanıtma”, “yardım ya da bilgi isteme” ve “paylaşma” becerilerini kazanmasında etkili olup olmadığını ortaya koymaktır. Araştırmaya, Bolu ilinde bulunan bir ilköğretim okulunun 1. sınıfına devam eden normal gelişim gösteren iki öğrenci ile aynı okulun özel eğitim sınıfına devam eden bir öğrenci katılmıştır. Araştırmada, tek denekli araştırma yöntemlerinden Becerilerarası Çoklu Yoklama Modeli kullanılmıştır. Hedef sosyal beceriler olan; kendini tanıtma, yardım ya da bilgi isteme ve paylaşma becerilerinin akran aracılığıyla zihin engelli öğrenciye kazandırılması için, akran aracılı öğretim yöntemine dayalı öğretim planları geliştirilmiştir. Geliştirilen öğretim planları, haftada 30 dakikalık oturumlar şeklinde uygulanmıştır. Öğretim oturumları sonunda, izleme oturumları yapılmıştır. Araştırmanın sonunda, akran aracılı sosyal beceri öğretiminin, öğrenciye öğretilmesi hedeflenen kendini tanıtma, yardım ya da bilgi isteme ve paylaşma becerilerinin kazandırılmasında etkili olduğu görülmüştür. The purpose of this study was to present the effectiveness of Peer Tutoring Socaial Skills Intervention Program in acquisition of “self-introduction”, “asking for information or help”, and “sharing skills” sby student with mental retardation. Two normally developing first graders, attending to a regular classroom, an done student, attending to a self-contained special education classroom of the same primary school in Bolu, participated in this study. Multiple probe model with probe condition across behavior, which is one of the single subject research designs, was used for this research. The intervention programs were developed to make the student with mental retardation acquire self-introduction, asking for information

  11. IAC - INTEGRATED ANALYSIS CAPABILITY

    Science.gov (United States)

    Frisch, H. P.

    1994-01-01

    The objective of the Integrated Analysis Capability (IAC) system is to provide a highly effective, interactive analysis tool for the integrated design of large structures. With the goal of supporting the unique needs of engineering analysis groups concerned with interdisciplinary problems, IAC was developed to interface programs from the fields of structures, thermodynamics, controls, and system dynamics with an executive system and database to yield a highly efficient multi-disciplinary system. Special attention is given to user requirements such as data handling and on-line assistance with operational features, and the ability to add new modules of the user's choice at a future date. IAC contains an executive system, a data base, general utilities, interfaces to various engineering programs, and a framework for building interfaces to other programs. IAC has shown itself to be effective in automatic data transfer among analysis programs. IAC 2.5, designed to be compatible as far as possible with Level 1.5, contains a major upgrade in executive and database management system capabilities, and includes interfaces to enable thermal, structures, optics, and control interaction dynamics analysis. The IAC system architecture is modular in design. 1) The executive module contains an input command processor, an extensive data management system, and driver code to execute the application modules. 2) Technical modules provide standalone computational capability as well as support for various solution paths or coupled analyses. 3) Graphics and model generation interfaces are supplied for building and viewing models. Advanced graphics capabilities are provided within particular analysis modules such as INCA and NASTRAN. 4) Interface modules provide for the required data flow between IAC and other modules. 5) User modules can be arbitrary executable programs or JCL procedures with no pre-defined relationship to IAC. 6) Special purpose modules are included, such as MIMIC (Model

  12. IAC - INTEGRATED ANALYSIS CAPABILITY

    Science.gov (United States)

    Frisch, H. P.

    1994-01-01

    The objective of the Integrated Analysis Capability (IAC) system is to provide a highly effective, interactive analysis tool for the integrated design of large structures. With the goal of supporting the unique needs of engineering analysis groups concerned with interdisciplinary problems, IAC was developed to interface programs from the fields of structures, thermodynamics, controls, and system dynamics with an executive system and database to yield a highly efficient multi-disciplinary system. Special attention is given to user requirements such as data handling and on-line assistance with operational features, and the ability to add new modules of the user's choice at a future date. IAC contains an executive system, a data base, general utilities, interfaces to various engineering programs, and a framework for building interfaces to other programs. IAC has shown itself to be effective in automatic data transfer among analysis programs. IAC 2.5, designed to be compatible as far as possible with Level 1.5, contains a major upgrade in executive and database management system capabilities, and includes interfaces to enable thermal, structures, optics, and control interaction dynamics analysis. The IAC system architecture is modular in design. 1) The executive module contains an input command processor, an extensive data management system, and driver code to execute the application modules. 2) Technical modules provide standalone computational capability as well as support for various solution paths or coupled analyses. 3) Graphics and model generation interfaces are supplied for building and viewing models. Advanced graphics capabilities are provided within particular analysis modules such as INCA and NASTRAN. 4) Interface modules provide for the required data flow between IAC and other modules. 5) User modules can be arbitrary executable programs or JCL procedures with no pre-defined relationship to IAC. 6) Special purpose modules are included, such as MIMIC (Model

  13. Graphical Visualization of Human Exploration Capabilities

    Science.gov (United States)

    Rodgers, Erica M.; Williams-Byrd, Julie; Arney, Dale C.; Simon, Matthew A.; Williams, Phillip A.; Barsoum, Christopher; Cowan, Tyler; Larman, Kevin T.; Hay, Jason; Burg, Alex

    2016-01-01

    NASA's pioneering space strategy will require advanced capabilities to expand the boundaries of human exploration on the Journey to Mars (J2M). The Evolvable Mars Campaign (EMC) architecture serves as a framework to identify critical capabilities that need to be developed and tested in order to enable a range of human exploration destinations and missions. Agency-wide System Maturation Teams (SMT) are responsible for the maturation of these critical exploration capabilities and help formulate, guide and resolve performance gaps associated with the EMC-identified capabilities. Systems Capability Organization Reporting Engine boards (SCOREboards) were developed to integrate the SMT data sets into cohesive human exploration capability stories that can be used to promote dialog and communicate NASA's exploration investments. Each SCOREboard provides a graphical visualization of SMT capability development needs that enable exploration missions, and presents a comprehensive overview of data that outlines a roadmap of system maturation needs critical for the J2M. SCOREboards are generated by a computer program that extracts data from a main repository, sorts the data based on a tiered data reduction structure, and then plots the data according to specified user inputs. The ability to sort and plot varying data categories provides the flexibility to present specific SCOREboard capability roadmaps based on customer requests. This paper presents the development of the SCOREboard computer program and shows multiple complementary, yet different datasets through a unified format designed to facilitate comparison between datasets. Example SCOREboard capability roadmaps are presented followed by a discussion of how the roadmaps are used to: 1) communicate capability developments and readiness of systems for future missions, and 2) influence the definition of NASA's human exploration investment portfolio through capability-driven processes. The paper concludes with a description

  14. Knowledge Management Capabilities Rubrics

    Directory of Open Access Journals (Sweden)

    Azizah B.A. Rahman

    2011-01-01

    Full Text Available Problem statement: Recently researchers discerned the vitality and importance of Knowledge Management Capabilities (KMC evaluation in organizations. In fact evaluation of KMC helps to prevent failure in Knowledge Management (KM projects. Approach: One of the most popular methods in the phase of evaluating KMC is Fuzzy method which evaluates seven attributes of KMC. Fuzzy needs KM experts to give their opinion about these attributes as input data. However in some organizations these experts are not available. Results: Therefore in this study a rubric matrix is developed as an assessment tool with ordered rank (very high, medium and very low of descriptive characteristics of criteria (seven attributes that organizations wish to evaluate. Conclusion: This rubric is applicable for members of an organization which are not familiar completely with KMC and also will be maintained by analyzing and surveying many different researches.

  15. PHOBOS physics capabilities

    Energy Technology Data Exchange (ETDEWEB)

    Baker, M.D. [Massachusetts Institute of Technology, Cambridge, MA (United States)

    1995-07-15

    PHOBOS is the name of a detector and of a research program to study systematically the physics of relativistic heavy-ion collisions over a large range of impact parameters and nuclear species. Collisions with a center mass energy of 200 A GeV at RHIC are expected to produce the highest energy densities ever accessible in the laboratory. In this writeup, the authors outline the physics capabilities of the PHOBOS detector and describe the detector design in terms of the general philosophy behind the PHOBOS research program. In order to make the discussion concrete, they then focus on two specific examples of physics measurements that they plan to make at RHIC: dN/d{eta} for charged particles and the mass spectrum from {phi} {yields} K{sup +}K{sup {minus}} decays.

  16. Practitioner Perspectives on Foundational Capabilities

    Science.gov (United States)

    Leider, Jonathon P.; Juliano, Chrissie; Castrucci, Brian C.; Beitsch, Leslie M.; Dilley, Abby; Nelson, Rachel; Kaiman, Sherry; Sprague, James B.

    2015-01-01

    Context: National efforts are underway to classify a minimum set of public health services that all jurisdictions throughout the United States should provide regardless of location. Such a set of basic programs would be supported by crosscutting services, known as the “foundational capabilities” (FCs). These FCs are assessment services, preparedness and disaster response, policy development, communications, community partnership, and organizational support activities. Objective: To ascertain familiarity with the term and concept of FCs and gather related perspectives from state and local public health practitioners. Design: In fall 2013, we interviewed 50 leaders from state and local health departments. We asked about familiarity with the term “foundational capabilities,” as well as the broader concept of FCs. We attempted to triangulate the utility of the FC concept by asking respondents about priority programs and services, about perceived unique contributions made by public health, and about prevalence and funding for the FCs. Setting: Telephone-based interviews. Participants: Fifty leaders of state and local health departments. Main Outcome Measures: Practitioner familiarity with and perspectives on the FCs, information about current funding streams for public health, and the likelihood of creating nationwide FCs that would be recognized and accepted by all jurisdictions. Results: Slightly more than half of the leaders interviewed said that they were familiar with the concept of FCs. In most cases, health departments had all of the capabilities to some degree, although operationalization varied. Few indicated that current funding levels were sufficient to support implementing a minimum level of FCs nationally. Conclusions: Respondents were not able to articulate the current or optimal levels of services for the various capabilities, nor the costs associated with them. Further research is needed to understand the role of FCs as part of the foundational

  17. Adaptive capability as indicated by behavioral and physiological responses, plasma HSP70 level, and PBMC HSP70 mRNA expression in Osmanabadi goats subjected to combined (heat and nutritional) stressors.

    Science.gov (United States)

    Shilja, Shaji; Sejian, V; Bagath, M; Mech, A; David, C G; Kurien, E K; Varma, Girish; Bhatta, Raghavendra

    2016-09-01

    A study was conducted to assess the impact of heat and nutritional stress simultaneously on the adaptive capability as indicated by behavioral and physiological responses, plasma heat shock protein 70 (HSP70) level, and peripheral blood mononuclear cells (PBMC) HSP70 gene expression in goats. Twenty-four adult Osmanabadi bucks (average body weight (BW) 16.0 kg) were used in the present study. The bucks were divided into four groups viz., C (n = 6; control), HS (n = 6; heat stress), NS (n = 6; nutritional stress), and CS (n = 6; combined stress). The study was conducted for a period of 45 days. C and HS bucks had ad libitum access to their feed while NS and CS bucks were under restricted feed (30 % intake of C bucks) to induce nutritional stress. The HS and CS bucks were exposed to solar radiation for 6 h a day between 10:00 a.m. and 4:00 p.m. to induce heat stress. The data was analyzed using repeated measures analysis of variance. The standing time differed significantly (P < 0.01) between ad libitum fed groups (C and HS) and restricted feeding groups (NS and CS). The highest (P < 0.01) lying time was recorded in the CS group while the lowest in the C and HS groups. The highest (P < 0.01) drinking frequency was also recorded in the CS group. Water intake recorded was significantly (P < 0.01) higher in both the HS and CS groups. The highest respiration rate (RR), pulse rate (PR), and rectal temperature (RT) during the afternoon were also recorded in the CS group. Further, skin temperature of the head, flank, and scrotum during the afternoon was also higher (P < 0.01) in the CS group. In addition, both plasma HSP70 concentration and PBMC HSP70 messenger RNA (mRNA) transcript expression were also significantly (P < 0.01) higher in the CS group. It can be concluded from this study that when two stressors occur simultaneously, they may have severe impact on adaptive capabilities of Osmanabadi bucks as compared to that would occur individually

  18. Developing Collaborative Product Development Capabilities

    DEFF Research Database (Denmark)

    Mahnke, Volker; Tran, Yen

    2012-01-01

    Collaborative product development capabilities support a company’s product innovation activities. In the context of the fast fashion sector, this paper examines the development of the product development capabilities (PDC) that align product development capabilities in a dual innovation context, ......-level, simultaneous learning processes and highlight the role of human agency in capability development with partners. Building on our analyses, we advance propositions for future research and managerial practices on developing dynamic collaboration capabilities....

  19. LHC Capabilities for Quarkonia

    CERN Document Server

    Petrushanko, Sergey

    2008-01-01

    The measurement of the charmonium and bottomonium resonances in nucleus-nucleus collisions provides crucial information on high-density QCD matter. First, the suppression of quarkonia production is generally agreed to be one of the most direct probes of quark-gluon plasma formation. The observation of anomalous J/$\\psi$ suppression at the CERN-SPS and at RHIC is well established but the clarification of some important remaining questions requires equivalent studies of the $\\Upsilon$ family, only possible at the LHC energies. Second, the production of heavy-quarks proceeds mainly via gluon-gluon fusion processes and, as such, is sensitive to saturation of the gluon density at low-x in the nucleus. Measured departures from the expected vacuum quarkonia cross-sections in Pb+Pb collisions at the LHC will thus provide valuable information not only on the thermodynamical state of the produced partonic medium, but also on the initial-state modifications of the nuclear parton distribution functions. The capabilities ...

  20. Impact of Personnel Capabilities on Organizational Innovation Capability

    DEFF Research Database (Denmark)

    Nielsen, Susanne Balslev; Momeni, Mostafa

    2016-01-01

    One of the most dynamic capabilities that lead to the strongest competitive advantage in the organizations is the innovation capability. Analysing the development of a firm’s innovation capability is an important research project, and can help organizations to achieve competitive advantage in thi...

  1. Small rover exploration capabilities

    Science.gov (United States)

    Salotti, Jean-Marc; Laithier, Corentin; Machut, Benoit; Marie, Aurélien; Bruneau, Audrey; Grömer, Gernot; Foing, Bernard H.

    2015-05-01

    For a human mission to the Moon or Mars, an important question is to determine the best strategy for the choice of surface vehicles. Recent studies suggest that the first missions to Mars will be strongly constrained and that only small unpressurized vehicles will be available. We analyze the exploration capabilities and limitations of small surface vehicles from the user perspective. Following the “human centered design” paradigm, the team focused on human systems interactions and conducted the following experiments: - Another member of our team participated in the ILEWG EuroMoonMars 2013 simulation at the Mars Desert Research Station in Utah during the same period of time. Although the possible traverses were restricted, a similar study with analog space suits and quads has been carried out. - Other experiments have been conducted in an old rock quarry close to Bordeaux, France. An expert in the use of quads for all types of terrains performed a demonstration and helped us to characterize the difficulties, the risks and advantages and drawbacks of different vehicles and tools. The vehicles that will be used on the surface of Mars have not been defined yet. Nevertheless, the results of our project already show that using a light and unpressurized vehicle (in the order of 150 kg) for the mobility on the Martian surface can be a true advantage. Part of the study was dedicated to the search for appropriate tools that could be used to make the vehicles easier to handle, safer to use and more efficient in the field to cross an obstacle. The final recommendation is to use winches and ramps, which already are widely used by quad drivers. We report on the extension of the reachable areas if such tools were available. This work has been supported by ILEWG, EuroMoonMars and the Austrian Space Forum (OEWF).

  2. Canadian national nuclear forensics capability project

    Energy Technology Data Exchange (ETDEWEB)

    Ball, J.; Dimayuga, I., E-mail: joanne.ball@cnl.ca [Canadian Nuclear Laboratories, Chalk River, Ontario (Canada); Summerell, I. [Royal Canadian Mounted Police, Ottawa, Ontario (Canada); Totland, M. [Canadian Nuclear Laboratories, Chalk River, Ontario (Canada); Jonkmans, G. [Defence Research and Development Canada, Ottawa, Ontario (Canada); Whitlock, J. [Canadian Nuclear Laboratories, Chalk River, Ontario (Canada); El-jaby, A. [Canadian Nuclear Safety Commission, Ottawa, Ontario (Canada); Inrig, E. [Defence Research and Development Canada, Ottawa, Ontario (Canada)

    2015-06-15

    Following the 2010 Nuclear Security Summit, Canada expanded its existing capability for nuclear forensics by establishing a national nuclear forensics laboratory network, which would include a capability to perform forensic analysis on nuclear and other radioactive material, as well as on traditional evidence contaminated with radioactive material. At the same time, the need for a national nuclear forensics library of signatures of nuclear and radioactive materials under Canadian regulatory control was recognized. The Canadian Safety and Security Program, administered by Defence Research and Development Canada's Centre for Security Science (DRDC CSS), funds science and technology initiatives to enhance Canada's preparedness for prevention of and response to potential threats. DRDC CSS, with assistance from Canadian Nuclear Laboratories, formerly Atomic Energy of Canada Limited, is leading the Canadian National Nuclear Forensics Capability Project to develop a coordinated, comprehensive, and timely national nuclear forensics capability. (author)

  3. Otizmli Bireylerle Akranlarının Spor ve Sanat Etkinlikleri Aracılığıyla Etkileşimde Bulundukları İki Örnek Uygulama

    Directory of Open Access Journals (Sweden)

    Hatice Günayer Şenel

    2009-07-01

    Full Text Available Yetersizliği olan ve olmayan akranların, spor ve sanat etkinlikleri aracılığıyla etkileşimde bulunmaları, her iki grup açısından farklı kazanımlar sağlar. Özellikle otizmi olan bireylerin, akranları ile etkileşimlerinin gereği ve önemi bilinmektedir. Bu çalışmada da otizmi olan ve olmayan grupların, farklı etkinlikler aracılığıyla bir araya geldikleri iki etkileşim örneği sunulmaktadır. Bu etkileşim örnekleri, Uluslararası Bakalorya (International Baccalaureate-IB programı uygulayan özel bir kolej ve bir Anadolu Lisesi olmak üzere iki ayrı okulda gerçekleştirilmiştir. Etkinliklere katılmaya gönüllü olan öğrenciler, aldıkları kısa bir eğitiminin ardından OÇEM (Otistik Çocuklar Eğitim Merkezi öğrencileri ile değişik spor ve sanat etkinliklerine katılmışlardır. Ülkemizde benzer etkileşim örneklerinin artması amacıyla, bu iki etkileşim örneği tanıtılıp, değerlendirildikten sonra, benzer çalışmalar için öneriler verilmektedir. Interaction of peers with and without disability through different sport and art activities and art activities bring different benefits to both groups. Especially interaction with peers of individuals with autism can be very beneficial; therefore, two different interaction examples with different activities were planned and conducted. The both examples were actualized at two different schools; first of the interaction example was held at one private high school with IB (International Baccalaureate-IB program, and the other one was held at one of Anadolu high schools. The volunteer students from these two schools were trained first and then they met with the peers from two different special education centers for autism regularly for doing different sport and art activities. In this study, two interaction examples were introduced and evaluated with suggestions for further studies in order to increase similar interactions.

  4. The Capability to Hold Property

    NARCIS (Netherlands)

    Claassen, Rutger|info:eu-repo/dai/nl/269266224

    2015-01-01

    This paper discusses the question of whether a capability theory of justice (such as that of Martha Nussbaum) should accept a basic “capability to hold property.” Answering this question is vital for bridging the gap between abstract capability theories of justice and their institutional implication

  5. The development of capability indicators

    NARCIS (Netherlands)

    Anand, Paul; Hunter, Graham; Carter, Ian; Dowding, Keith; Guala, Francesco; Van Hees, Martin

    2009-01-01

    This paper is motivated by sustained interest in the capabilities approach to welfare economics combined with the paucity of economic statistics that measure capabilities at the individual level. Specifically, it takes a much discussed account of the normatively desirable capabilities constitutive o

  6. The Capability to Hold Property

    NARCIS (Netherlands)

    Claassen, Rutger|info:eu-repo/dai/nl/269266224

    2015-01-01

    This paper discusses the question of whether a capability theory of justice (such as that of Martha Nussbaum) should accept a basic “capability to hold property.” Answering this question is vital for bridging the gap between abstract capability theories of justice and their institutional

  7. Leak detection capability in CANDU reactors

    Energy Technology Data Exchange (ETDEWEB)

    Azer, N.; Barber, D.H.; Boucher, P.J. [and others

    1997-04-01

    This paper addresses the moisture leak detection capability of Ontario Hydro CANDU reactors which has been demonstrated by performing tests on the reactor. The tests confirmed the response of the annulus gas system (AGS) to the presence of moisture injected to simulate a pressure tube leak and also confirmed the dew point response assumed in leak before break assessments. The tests were performed on Bruce A Unit 4 by injecting known and controlled rates of heavy water vapor. To avoid condensation during test conditions, the amount of moisture which could be injected was small (2-3.5 g/hr). The test response demonstrated that the AGS is capable of detecting and annunciating small leaks. Thus confidence is provided that it would alarm for a growing pressure tube leak where the leak rate is expected to increase to kg/hr rapidly. The measured dew point response was close to that predicted by analysis.

  8. Advanced capability RFID system

    Science.gov (United States)

    Gilbert, Ronald W.; Steele, Kerry D.; Anderson, Gordon A.

    2007-09-25

    A radio-frequency transponder device having an antenna circuit configured to receive radio-frequency signals and to return modulated radio-frequency signals via continuous wave backscatter, a modulation circuit coupled to the antenna circuit for generating the modulated radio-frequency signals, and a microprocessor coupled to the antenna circuit and the modulation circuit and configured to receive and extract operating power from the received radio-frequency signals and to monitor inputs on at least one input pin and to generate responsive signals to the modulation circuit for modulating the radio-frequency signals. The microprocessor can be configured to generate output signals on output pins to associated devices for controlling the operation thereof. Electrical energy can be extracted and stored in an optional electrical power storage device.

  9. Capability-based computer systems

    CERN Document Server

    Levy, Henry M

    2014-01-01

    Capability-Based Computer Systems focuses on computer programs and their capabilities. The text first elaborates capability- and object-based system concepts, including capability-based systems, object-based approach, and summary. The book then describes early descriptor architectures and explains the Burroughs B5000, Rice University Computer, and Basic Language Machine. The text also focuses on early capability architectures. Dennis and Van Horn's Supervisor; CAL-TSS System; MIT PDP-1 Timesharing System; and Chicago Magic Number Machine are discussed. The book then describes Plessey System 25

  10. Transforming organizational capabilities in strategizing

    DEFF Research Database (Denmark)

    Jørgensen, Claus; Friis, Ole Uhrskov; Koch, Christian

    2014-01-01

    -term evolvements within the companies. We develop our framework of understanding organizational capabilities drawing on dynamic capability, relational capability and strategy as practice concepts, appreciating the performative aspects of developing new routines. Our two cases are taken from one author’s Ph......Offshored and networked enterprises are becoming an important if not leading organizational form and this development seriously challenges their organizational capabilities. More specifically, over the last years, SMEs have commenced entering these kinds of arrangements. As the organizational...... capabilities of SMEs are limited at the outset, even more emphasis is needed regarding the issues of developing relevant organizational capabilities. This paper aims at investigating how capabilities evolve during an offshoring process of more than 5 years in two Danish SMEs, i.e. not only short- but long...

  11. Capabilities and Incapabilities of the Capabilities Approach to Health Justice.

    Science.gov (United States)

    Selgelid, Michael J

    2016-01-01

    This first part of this article critiques Sridhar Venkatapuram's conception of health as a capability. It argues that Venkatapuram relies on the problematic concept of dignity, implies that those who are unhealthy lack lives worthy of dignity (which seems politically incorrect), sets a low bar for health, appeals to metaphysically problematic thresholds, fails to draw clear connections between appealed-to capabilities and health, and downplays the importance/relevance of health functioning. It concludes by questioning whether justice entitlements should pertain to the capability for health versus health achievements, challenging Venkatapuram's claims about the strength of health entitlements, and demonstrating that the capabilities approach is unnecessary to address social determinants of health.

  12. Development of online collaborative tracking and management tool for content development and the effectiveness of this tool İçerik geliştirmede çevrimiçi işbirliğine dayalı takip ve yönetim aracının geliştirilmesi ve bu aracın etkililiği

    Directory of Open Access Journals (Sweden)

    Erinç Karataş

    2013-06-01

    Full Text Available This research, planned as a descriptive study, was accomplished with the participation of 43 employees and 2 administrators working in the Content Development Team at Community School of Distance Education in 2010-2011 academic year. In order to examine the effect the use of this tool on the content development processes, before and after the experimental process, pretest and posttest were applied to managers and employees for collecting their opinions. In the experimental process, single-group pretest-posttest experimental design was used. The independent variable of this research is the use of a collaborative online project tracking and management tool, and the dependent variable is employee opinions. The data obtained from the opinions of the organization managers and employees were analyzed with the Wilcoxon signed rank test, a non-parametric statistical method. The findings of this study are: tools like ÇİTA build up the project management process and facilitate project tracking in content development processes in terms of management, save the time in reaching the end of the project, make team communication healthy and fast, and finally the usage of these kinds of tools is simple, functional, safe, and reliable in terms of tool. Özet Bir durum çalışması olarak ele alınan bu araştırma, 2010-2011 eğitim öğretim yılı Gazi Üniversitesi Uzaktan Eğitim Meslek Yüksekokulu İçerik Geliştirme Ekibinde yer alan 43 çalışan ve 2 yöneticinin katılımı ile gerçekleştirilmiştir. Aracın süreçte kullanılmasının öncesi ve sonrasında, bu aracın kullanımının içerik geliştirme süreçlerine olan etkisini incelemek amacıyla yöneticilerin ve çalışanların görüşlerinin alındığı öntest ve sontest uygulanmıştır. Deneysel işlem sürecinde tek grup öntest sontest deneysel desen kullanılmıştır. Araştırmanın bağımsız değişkeni geliştirilen çevrimiçi işbirliğine dayalı proje takip ve y

  13. Technological Dynamics and Social Capability

    DEFF Research Database (Denmark)

    Fagerberg, Jan; Feldman, Maryann; Srholec, Martin

    2014-01-01

    This article analyzes factors shaping technological capabilities in USA and European countries, and shows that the differences between the two continents in this respect are much smaller than commonly assumed. The analysis demonstrates a tendency toward convergence in technological capabilities...... for the sample as a whole between 1998 and 2008. The results indicate that social capabilities, such as well-developed public knowledge infrastructure, an egalitarian distribution of income, a participatory democracy and prevalence of public safety condition the growth of technological capabilities. Possible...

  14. Performance Analyses and Experiments of a Piezoelectric Vibration Energy Harvested with Multifrequency Response Capability%多频响应的压电振动能量采集器的性能分析与测试

    Institute of Scientific and Technical Information of China (English)

    喻其炳; 朱荣荣; 李川

    2014-01-01

    To improve performance of vibration energy harvesting for piezoelectric cantilever,a vibration energy harvester with multifrequency responses was presented.An auxiliary beam was in-serted between the piezoelectric cantilever and vibration base.Two tip masses were installed at the end of the piezoelectric beam and the auxiliary beam respectively.The two beams were connected per-pendicularly.The weight of the auxiliary beam mass was designed to be much greater than that of the piezoelectric beam,and the first natural frequency of the piezoelectric beam was chosen between the first two natural frequencies of the auxiliary beam.In this way,the vibration response of the piezoe-lectric beam is j ust the sum of multiple frequency bands.An analytical electromechanical model was proposed to describe vibration response and energy harvesting feature of the proposed harvester.A prototype device was developed for testing.The results show that,compared to the conventional can-tilevered piezoelectric harvester,the proposed one is capable of harvesting much energy in a broader frequency band.%为了提升压电悬臂梁采集振动能量的能力,研究了一种具有多频振动响应的振动能量采集器。在压电悬臂梁与振动激励源之间增加一个附加梁,压电悬臂梁和附加梁的末端分别安装一个质量块,压电悬臂梁和附加梁垂直连接。附加梁的末端质量被设计为远大于压电梁的末端质量,而压电梁的一阶谐振频率在附加梁的前两阶谐振频率之间。采用该设计,压电悬臂梁的振动响应是多个谐振频带的叠加。通过建立机电解析模型,描述了所提出的振动能量采集器的振动响应和发电特性,同时制作了一个振动能量采集器样机进行试验,结果表明,与传统的悬臂梁振动能量采集器相比,所提出的振动能量采集器可以在更宽的频带范围内采集更多的振动能量。

  15. Dynamic capabilities, creative action, and poetics

    Directory of Open Access Journals (Sweden)

    Donald MacLean

    2017-05-01

    Full Text Available Research on dynamic capabilities explores how businesses change enables enterprises to remain competitive. However, theory on dynamic capabilities still struggles to capture novelty, the essence of change. This study argues that a full understanding of strategic change requires us to sharpen our focus on real people and experiences; in turn, we must incorporate other faculties, which almost always operate alongside our logical ones, into our theory. We must pay more attention to the “non­-rational” sides of ourselves—including, but not limited to, our imaginations, intuitions, attractions, biographies, preferences, and aesthetic faculties and capabilities. We argue that all such faculties, on the one hand, are central to our abilities to comprehend and cope with complexity and, on the other hand, foster novel understandings, potential responses, and social creativity. This study intro­duces the possibility of an alternative form of inquiry that highlights the role of poetic faculties in strategic behavior and change.

  16. Connecting Curriculum, Capabilities and Careers

    Science.gov (United States)

    Thomas, Ian; Depasquale, James

    2016-01-01

    Purpose: The reported research aims to examine the extent to which sustainability capabilities have been delivered by a specific example of Education for Sustainability (EfS) and Education for Sustainable Development (ESD), and how important the capabilities have been in the workplace. Design/methodology/approach Students who participated in an…

  17. A business analytics capability framework

    Directory of Open Access Journals (Sweden)

    Ranko Cosic

    2015-09-01

    Full Text Available Business analytics (BA capabilities can potentially provide value and lead to better organisational performance. This paper develops a holistic, theoretically-grounded and practically relevant business analytics capability framework (BACF that specifies, defines and ranks the capabilities that constitute an organisational BA initiative. The BACF was developed in two phases. First, an a priori conceptual framework was developed based on the Resource-Based View theory of the firm and a thematic content analysis of the BA literature. Second, the conceptual framework was further developed and refined using a three round Delphi study involving 16 BA experts. Changes from the Delphi study resulted in a refined and confirmed framework including detailed capability definitions, together with a ranking of the capabilities based on importance. The BACF will help academic researchers and industry practitioners to better understand the capabilities that constitute an organisational BA initiative and their relative importance. In future work, the capabilities in the BACF will be operationalised to measure their as-is status, thus enabling organisations to identify key areas of strength and weakness and prioritise future capability improvement efforts.

  18. Connecting Curriculum, Capabilities and Careers

    Science.gov (United States)

    Thomas, Ian; Depasquale, James

    2016-01-01

    Purpose: The reported research aims to examine the extent to which sustainability capabilities have been delivered by a specific example of Education for Sustainability (EfS) and Education for Sustainable Development (ESD), and how important the capabilities have been in the workplace. Design/methodology/approach Students who participated in an…

  19. Influences of mechanical exposure biographies on physical capabilities of workers from automotive industry - a study on possible dose-response relationships and consequences for short and long term job rotation.

    Science.gov (United States)

    Rademacher, Holger; Bruder, Ralph; Sinn-Behrendt, Andrea; Landau, Kurt

    2012-01-01

    This paper describes a field study in production areas of a vehicle manufacturing plant, where 106 male workers (aged from 20 to 63 years) were examined and interviewed by the authors. Aim of study was to identify relationships between specific physical worker capabilities and doses of mechanical exposures using self-developed standardized questionnaires as well as a battery of work-specific tests. The dependent variables are different "physical capabilities", classified using a five-point rating scale with regard to the grade of limitation of the respective capability. Independent variables are "age" and specific "mechanical exposures". Several exposures were combined and multiplied with their respective durations in order to determine doses on three different body regions - back, shoulder-neck and upper limbs. There are significant positive correlations between "age" and "dose of mechanical exposure on back/shoulder-neck/upper limbs region". The analysis of the relationship between dose of exposure and different capabilities to lift or reposition loads (with variable weight) shows weak significant correlations for all three body regions. Data analysis shows no significant correlations between any dose of mechanical exposure and capabilities to work in awkward body postures.These results should be considered in age management programs when scheduling future employee assignments to workplaces, especially for production systems where manual handling tasks are dominant.

  20. Maritime emergency management capabilities in the Arctic

    DEFF Research Database (Denmark)

    Roud, Ensieh Kheiri Pileh; Borch, Odd Jarl; Jakobsen, Uffe

    2016-01-01

    several institutions and management levels are included. Host nation support from neighboring countries may be in demand. Experiences from the accident with the cruise ship “Maxim Gorkiy” in the ice south-west of Svalbard are highlighted together with the experiences from large-scale exercises in the High...... North. We illuminate the capabilities needed, and the training of key personnel responsible for coordinating such operations....

  1. Maritime emergency management capabilities in the Arctic

    DEFF Research Database (Denmark)

    Roud, Ensieh Kheiri Pileh; Borch, Odd Jarl; Jakobsen, Uffe

    2016-01-01

    several institutions and management levels are included. Host nation support from neighboring countries may be in demand. Experiences from the accident with the cruise ship “Maxim Gorkiy” in the ice south-west of Svalbard are highlighted together with the experiences from large-scale exercises in the High...... North. We illuminate the capabilities needed, and the training of key personnel responsible for coordinating such operations....

  2. Air Vehicle Integration and Technology Research (AVIATR). Task Order 0023: Predictive Capability for Hypersonic Structural Response and Life Prediction: Phase 2 - Detailed Design of Hypersonic Cruise Vehicle Hot-Structure

    Science.gov (United States)

    2012-02-01

    CATIA 3D design software CEAC Combined Environmental Chamber CEAS NASTRAN spring element CFAST NASTRAN Fastener Element CFD Computational Fluid... CATIA and SolidWorks do not have the capability to create a surface based on a set of points. Unigraphics does have a “Create Surface from Point

  3. Transforming organizational capabilities in strategizing

    DEFF Research Database (Denmark)

    Jørgensen, Claus; Friis, Ole Uhrskov; Koch, Christian

    2014-01-01

    Offshored and networked enterprises are becoming an important if not leading organizational form and this development seriously challenges their organizational capabilities. More specifically, over the last years, SMEs have commenced entering these kinds of arrangements. As the organizational cap...

  4. Advanced Capabilities for Combat Medics

    National Research Council Canada - National Science Library

    Convertino, Victor A; Cooke, William H; Salinas, Jose; Holcomb, John B

    2004-01-01

    The US Army Institute of Surgical Research (USAISR) has the lead for directing the Research Program Area for Advanced Triage Capabilities for Combat Medics in the Medical Research and Materiel Command (MRMC...

  5. MCNP: Multigroup/adjoint capabilities

    Energy Technology Data Exchange (ETDEWEB)

    Wagner, J.C.; Redmond, E.L. II; Palmtag, S.P.; Hendricks, J.S.

    1994-04-01

    This report discusses various aspects related to the use and validity of the general purpose Monte Carlo code MCNP for multigroup/adjoint calculations. The increased desire to perform comparisons between Monte Carlo and deterministic codes, along with the ever-present desire to increase the efficiency of large MCNP calculations has produced a greater user demand for the multigroup/adjoint capabilities. To more fully utilize these capabilities, we review the applications of the Monte Carlo multigroup/adjoint method, describe how to generate multigroup cross sections for MCNP with the auxiliary CRSRD code, describe how to use the multigroup/adjoint capability in MCNP, and provide examples and results indicating the effectiveness and validity of the MCNP multigroup/adjoint treatment. This information should assist users in taking advantage of the MCNP multigroup/adjoint capabilities.

  6. Vulnerability, Health Agency and Capability to Health.

    Science.gov (United States)

    Straehle, Christine

    2016-01-01

    One of the defining features of the capability approach (CA) to health, as developed in Venkatapuram's book Health Justice, is its aim to enable individual health agency. Furthermore, the CA to health hopes to provide a strong guideline for assessing the health-enabling content of social and political conditions. In this article, I employ the recent literature on the liberal concept of vulnerability to assess the CA. I distinguish two kinds of vulnerability. Considering circumstantial vulnerability, I argue that liberal accounts of vulnerability concerned with individual autonomy, align with the CA to health. Individuals should, as far as possible, be able to make health-enabling decisions about their lives, and their capability to do so should certainly not be hindered by public policy. The CA to health and a vulnerability-based analysis then work alongside to define moral responsibilities and designate those who hold them. Both approaches demand social policy to address circumstances that hinder individuals from taking health-enabling decisions. A background condition of vulnerability, on the other hand, even though it hampers the capability for health, does not warrant the strong moral claim proposed by the CA to health to define health as a meta-capability that should guide social policy. Nothing in our designing social policy could change the challenge to health agency when we deal with background conditions of vulnerability.

  7. Accelerator and electrodynamics capability review

    Energy Technology Data Exchange (ETDEWEB)

    Jones, Kevin W [Los Alamos National Laboratory

    2010-01-01

    Los Alamos National Laboratory (LANL) uses capability reviews to assess the science, technology and engineering (STE) quality and institutional integration and to advise Laboratory Management on the current and future health of the STE. Capability reviews address the STE integration that LANL uses to meet mission requirements. The Capability Review Committees serve a dual role of providing assessment of the Laboratory's technical contributions and integration towards its missions and providing advice to Laboratory Management. The assessments and advice are documented in reports prepared by the Capability Review Committees that are delivered to the Director and to the Principal Associate Director for Science, Technology and Engineering (PADSTE). Laboratory Management will use this report for STE assessment and planning. LANL has defined fifteen STE capabilities. Electrodynamics and Accelerators is one of the seven STE capabilities that LANL Management (Director, PADSTE, technical Associate Directors) has identified for review in Fiscal Year (FY) 2010. Accelerators and electrodynamics at LANL comprise a blend of large-scale facilities and innovative small-scale research with a growing focus on national security applications. This review is organized into five topical areas: (1) Free Electron Lasers; (2) Linear Accelerator Science and Technology; (3) Advanced Electromagnetics; (4) Next Generation Accelerator Concepts; and (5) National Security Accelerator Applications. The focus is on innovative technology with an emphasis on applications relevant to Laboratory mission. The role of Laboratory Directed Research and Development (LDRD) in support of accelerators/electrodynamics will be discussed. The review provides an opportunity for interaction with early career staff. Program sponsors and customers will provide their input on the value of the accelerator and electrodynamics capability to the Laboratory mission.

  8. Target Capabilities List: A Companion to the National Preparedness Guidelines

    Science.gov (United States)

    2007-09-01

    vendor managed inventory ( VMI ) supplies. Store and maintain medical materiel... Management Group, Laboratory Supplies Management Group Strategic National Stockpile (including Vendor Managed Inventory ) 12-hour Push Package of...Stockpile (including vendor managed inventory ) Response capability will leverage both Federal stockpiles and commercial capabilities.

  9. Improving Capabilities for Irregular Warfare. Volume 2. Capabilities Analysis

    Science.gov (United States)

    2007-08-01

    ranged from the Israelis and other Jews buying up all the land in Iraq, to the Coca -Cola logo (sup- posedly owned by Jews) as saying “No Mecca, No...Insurgencies en- tail especially demanding learning curves. Not only does one have to master the structure, TTPs, and capabilities of the insurgents, but a

  10. working towards an african peacekeeping capability: key issues ...

    African Journals Online (AJOL)

    Arianne

    Scientia Militaria, South African Journal of Military Studies, Vol 34, Nr 2, ..... disciplinary standby capabilities at the AU and sub-regional level which would be ..... Charter. A great deal of the practical challenges and responsibility for developing.

  11. Physical capability scale: psychometric testing.

    Science.gov (United States)

    Resnick, Barbara; Boltz, Marie; Galik, Elizabeth; Wells, Chris

    2013-02-01

    The purpose of this study was to describe the psychometric testing of the Basic Physical Capability Scale. The study was a secondary data analysis of combined data sets from three studies. Study participants included 93 older adults, recruited from 2 acute-care settings and 110 older adults living in long-term care facilities. Rasch analysis was used for the testing of the measurement model. There was some support for construct validity based on the fit of the items to the scale across both samples. In addition, there was support for hypothesis testing as physical function was significantly associated with physical capability. There was evidence for internal consistency (Alpha coefficients of .77-.83) and interrater reliability based on an intraclass correlation of .81. This study provided preliminary support for the reliability and validity of the Basic Physical Capability Scale, and guidance for scale revisions and continued use.

  12. A unifying process capability metric

    Directory of Open Access Journals (Sweden)

    John Jay Flaig

    2009-07-01

    Full Text Available A new economic approach to process capability assessment is presented, which differs from the commonly used engineering metrics. The proposed metric consists of two economic capability measures – the expected profit and the variation in profit of the process. This dual economic metric offers a number of significant advantages over other engineering or economic metrics used in process capability analysis. First, it is easy to understand and communicate. Second, it is based on a measure of total system performance. Third, it unifies the fraction nonconforming approach and the expected loss approach. Fourth, it reflects the underlying interest of management in knowing the expected financial performance of a process and its potential variation.

  13. CLAS Capabilities at Higher Energies

    Energy Technology Data Exchange (ETDEWEB)

    Stepan Stepanyan

    1998-06-01

    In order to study the capability of the Hall B CLAS detector at high energies, we studied the resolution and the acceptance for various final states in the electroproduction on a proton target at 10 GeV beam energy. We find that, although CLAS can do some of the interesting physics at higher energies in the present configuration, several modifications can significantly improve the overall physics acceptable to CLAS at high energies. In this report, we present some of the results of those studies with suggestions on possible detector improvements to optimize the physics capabilities of CLAS.

  14. Nanofabrication principles, capabilities and limits

    CERN Document Server

    Cui, Zheng

    2017-01-01

    This second edition of Nanofabrication is one of the most comprehensive introductions on nanofabrication technologies and processes. A practical guide and reference, this book introduces readers to all of the developed technologies that are capable of making structures below 100nm. The principle of each technology is introduced and illustrated with minimum mathematics involved. Also analyzed are the capabilities of each technology in making sub-100nm structures, and the limits of preventing a technology from going further down the dimensional scale. This book provides readers with a toolkit that will help with any of their nanofabrication challenges.

  15. Exploring unconventional capabilities of holographic tweezers

    Science.gov (United States)

    Hernandez, R. J.; Pagliusi, P.; Provenzano, C.; Cipparrone, G.

    2011-06-01

    We report an investigation of manipulation and trapping capabilities of polarization holographic tweezers. A polarization gradient connected with a modulation of the ellipticity shows an optical force related to the polarization of the light that can influence optically isotropic particles. While in the case of birefringent particles an unconventional trapping in circularly polarized fringes is observed. A liquid crystal emulsion has been adopted to investigate the capabilities of the holographic tweezers. The unusual trapping observed for rotating bipolar nematic droplets has suggested the involvement of the lift hydrodynamic force responsible of the Magnus effect, originating from the peculiar optical force field. We show that the Magnus force which is ignored in the common approach can contribute to unconventional optohydrodynamic trapping and manipulation.

  16. Microfoundations of Routines and Capabilities

    DEFF Research Database (Denmark)

    Felin, Teppo; Foss, Nicolai Juul; Heimriks, Koen H.

    We discuss the microfoundations of routines and capabilities, including why a microfoundations view is needed and how it may inform work on organizational and competitive heterogeneity. Building on extant research, we identify three primary categories of micro-level components underlying routines...

  17. Microfoundations of Routines and Capabilities

    DEFF Research Database (Denmark)

    Felin, Tippo; Foss, Nicolai Juul; Heimericks, Koen H.;

    2012-01-01

    This article introduces the Special Issue and discusses the microfoundations of routines and capabilities, including why a microfoundations view is needed and how it may inform work on organizational and competitive heterogeneity. Building on extant research, we identify three primary categories...

  18. Judgmental Forecasting of Operational Capabilities

    DEFF Research Database (Denmark)

    Hallin, Carina Antonia; Tveterås, Sigbjørn; Andersen, Torben Juul

    This paper explores a new judgmental forecasting indicator, the Employee Sensed Operational Capabilities (ESOC). The purpose of the ESOC is to establish a practical prediction tool that can provide early signals about changes in financial performance by gauging frontline employees’ sensing...

  19. Building server capabilities in China

    DEFF Research Database (Denmark)

    Adeyemi, Oluseyi; Slepniov, Dmitrij; Wæhrens, Brian Vejrum

    2012-01-01

    The purpose of this paper is to further our understanding of multinational companies building server capabilities in China. The paper is based on the cases of two western companies with operations in China. The findings highlight a number of common patterns in the 1) managerial challenges related...

  20. ABOUT SOLIDWORKS SUSTAINABILITY MODULE CAPABILITIES

    Directory of Open Access Journals (Sweden)

    Cătălin IANCU

    2014-05-01

    Full Text Available In the paper are presented the SolidWorks analysis steps to be taken in order to study sustainability of parts or assemblies designed. There are presented the software capabilities and the settings that have to be done for such analysis and the results shown by software.

  1. A Bayesian-style approach to estimating LISA science capability

    Science.gov (United States)

    Baker, John; Marsat, Sylvain

    2017-01-01

    A full understanding of LISA's science capability will require accurate models of incident waveform signals and the instrumental response. While Fisher matrix analysis is useful for some estimates, a Bayesian characterization of simulated probability distributions is needed for understanding important cases at the limit of LISA's capability. We apply fast analysis algorithms enabling accurate treatment using EOB waveforms with relevant higher modes and the full-featured LISA response to study these aspects of LISA science capability. Supported by NASA grant 11-ATP-046.

  2. Environmental Turbulence, Enterprises Strategic Responses and the Formation & Evolution of Dynamic Capabilities:Theoretic Model and Propositions%环境变动、企业战略反应与动态能力的形成演化:理论模型与命题

    Institute of Scientific and Technical Information of China (English)

    曾萍; 宋铁波

    2013-01-01

      当前企业动态能力形成演化的研究更多地关注了影响动态能力形成的直接因素,而缺乏对环境变动影响下企业内在战略反应与动态能力形成演化路径的研究。基于资源基础理论与演化理论视角,对相关文献进行分析与综合,在此基础上构建了一个环境变动、企业战略反应以及动态能力形成演化的理论模型,并提炼出相关命题,从而为动态能力理论的发展以及企业战略管理实践提供了新的洞见。%  Current research on the formation and evolution of dynamic capabilities pays great attention to the direct factors that affect the formation of dynamic capabilities , but there is little research on enterprises strategic responses and the formation and evolvement of dynamic capabilities under the influence of environmental turbulence .Based on the Resource-Based Theory and the Evolution Theory , this article analyzes relevant literature comprehensively , and establishes a theoretical model of environmental turbulence , enterprises strategic responses and the formation and evolvement of dynamic capabilities , and then draws some relevant propositions .The conclusion of this article provides new insights on the development of dynamic capabilities theory and the practice of enterprises manage -ment.

  3. Rapid Capability Fielding Toolbox Study

    Science.gov (United States)

    2010-03-01

    should  inventory  and  leverage  the  substantial  capabilities  currently existing across  the  department  in M&S  (game and virtual environment...Northwestern University, and  Samsung .   One example project  that  included  significant  use of UCD  tools was  the development of  the Chicago Bus Rapid...Establish C2E training and career development programs for DoD engineers.  Recommendation:   Inventory  DoD Laboratory Capabilities  The DoD  should

  4. Judgmental Forecasting of Operational Capabilities

    DEFF Research Database (Denmark)

    Hallin, Carina Antonia; Tveterås, Sigbjørn; Andersen, Torben Juul

    This paper explores a new judgmental forecasting indicator, the Employee Sensed Operational Capabilities (ESOC). The purpose of the ESOC is to establish a practical prediction tool that can provide early signals about changes in financial performance by gauging frontline employees’ sensing...... can predict financial performance. Monthly data were collected from frontline employees in three different companies during an 18-month period, and the initial results indicate that the ESOChas predictive power....... of changes in the firm’s operational capabilities. We present the first stage of the development of ESOC by applying a formative measurement approach to test the index in relation to financial performance and against an organizational commitment scale. We use distributed lag models to test whether the ESOC...

  5. Improving the RPC rate capability

    CERN Document Server

    Aielli, G; Cardarelli, R; Di Ciaccio, A; Di Stante, L; Iuppa, R; Liberti, B; Paolozzi, L; Pastori, E; Santonico, R; Toppi, M

    2016-01-01

    This paper has the purpose to study the rate capability of the Resistive Plate Chamber, RPC, starting from the basic physics of this detector. The effect of different working parameters determining the rate capability is analysed in detail, in order to optimize a new family of RPCs for applications to heavy irradiation environments and in particular to the LHC phase 2. A special emphasis is given to the improvement achievable by minimizing the avalanche charge delivered in the gas. The paper shows experimental results of Cosmic Ray tests, performed to study the avalanche features for different gas gap sizes, with particular attention to the overall delivered charge. For this purpose, the paper studies, in parallel to the prompt electronic signal, also the ionic signal which gives the main contribution to the delivered charge. Whenever possible the test results are interpreted on the base of the RPC detector physics and are intended to extend and reinforce our physical understanding of this detector.

  6. LOFT Augmented Operator Capability Program

    Energy Technology Data Exchange (ETDEWEB)

    Hollenbeck, D.A.; Krantz, E.A.; Hunt, G.L.; Meyer, O.R.

    1980-01-01

    The outline of the LOFT Augmented Operator Capability Program is presented. This program utilizes the LOFT (Loss-of-Fluid Test) reactor facility which is located at the Idaho National Engineering Laboratory and the LOFT operational transient experiment series as a test bed for methods of enhancing the reactor operator's capability for safer operation. The design of an Operational Diagnotics and Display System is presented which was backfit to the existing data acquisition computers. Basic color-graphic displays of the process schematic and trend type are presented. In addition, displays were developed and are presented which represent safety state vector information. A task analysis method was applied to LOFT reactor operating procedures to test its usefulness in defining the operator's information needs and workload.

  7. Human-Centered Design Capability

    Science.gov (United States)

    Fitts, David J.; Howard, Robert

    2009-01-01

    For NASA, human-centered design (HCD) seeks opportunities to mitigate the challenges of living and working in space in order to enhance human productivity and well-being. Direct design participation during the development stage is difficult, however, during project formulation, a HCD approach can lead to better more cost-effective products. HCD can also help a program enter the development stage with a clear vision for product acquisition. HCD tools for clarifying design intent are listed. To infuse HCD into the spaceflight lifecycle the Space and Life Sciences Directorate developed the Habitability Design Center. The Center has collaborated successfully with program and project design teams and with JSC's Engineering Directorate. This presentation discusses HCD capabilities and depicts the Center's design examples and capabilities.

  8. Akran Aracılı Uyarlanmış Fiziksel Aktivitelere Katılan Otizm Spektrum Bozukluğu Olan Bir Bireyin İletişim Becerilerindeki Değişimlerin İncelenmesi

    Directory of Open Access Journals (Sweden)

    Erkan Yarımkaya

    2017-07-01

    Full Text Available Bu araştırmanın amacı, akran aracılı uyarlanmış fiziksel aktivite (AAUFA programına katılan otizm spektrum bozukluğu (OSB olan bir bireyin iletişim becerilerindeki değişimlerin incelenmesidir. Durum (Vaka çalışması modelinde desenlenen araştırmaya, OSB tanılı bir birey ve normal gelişim gösteren (NGG üç akran katılmıştır. Araştırmada, OSB tanılı birey ve NGG üç akran ile birlikte üçü serbest fiziksel aktivite oturumu, 18’i ise AAUFA oturumu olmak üzere toplamda 21 eğitim oturumu gerçekleştirilmiştir. AAUFA oturumlarında, 29 farklı uyarlanmış fiziksel aktivite akran aracılı olarak uygulanmıştır. AAUFA oturumları öncesi, NGG üç akran ile birlikte altı oturum akran eğitimi süreci gerçekleştirilmiştir. Araştırma süresince gerçekleştirilen tüm oturumlar video kamera ile kayıt altına alınmıştır. Araştırma verileri farklı veri toplama araçları (gözlem formu, yarı yapılandırılmış görüşme formları, saha notları ve yansıtmacı günlük ile elde edilmiştir. Araştırmanın bulgularına göre, OSB tanılı bireyin göz kontağı, ortak ilgi, iletişim başlatma ve iletişime tepki becerilerinin AAUFA programı süresince olumlu yönde arttığı tespit edilmiştir. İletişim becerilerinde gözlenen bu olumlu değişimlerin araştırmadan üç hafta sonra elde edilen izleme ölçümünde devam ettiği saptanmıştır. Sonuç olarak, AAUFA programının OSB tanılı bireyin iletişim becerileri üzerinde olumlu yönde etkisi olduğu izlenimi edinilmiştir. The objective of this research is the investigation of the changes in the communication skills of an individual with autism spectrum disorder (ASD participating in the peer-mediated adapted physical activity (PMAPA program. One individual with an ASD diagnosis and three peers with typical development (TD participated in the research which was designed in the model of a case study. In the research, a total of 21

  9. Determining your organization's 'risk capability'.

    Science.gov (United States)

    Hannah, Bill; Hancock, Melinda

    2014-05-01

    An assessment of a provider's level of risk capability should focus on three key elements: Business intelligence, including sophisticated analytical models that can offer insight into the expected cost and quality of care for a given population. Clinical enterprise maturity, marked by the ability to improve health outcomes and to manage utilization and costs to drive change. Revenue transformation, emphasizing the need for a revenue cycle platform that allows for risk acceptance and management and that provides incentives for performance against defined objectives.

  10. Exploration Medical Capability - Technology Watch

    Science.gov (United States)

    Krihak, Michael; Watkins, Sharmila; Barr, Yael; Barsten, Kristina; Fung, Paul; Baumann, David

    2011-01-01

    The objectives of the Technology Watch process are to identify emerging, high-impact technologies that augment current ExMC development efforts, and to work with academia, industry, and other government agencies to accelerate the development of medical care and research capabilities for the mitigation of potential health issues that could occur during space exploration missions. The establishment of collaborations with these entities is beneficial to technology development, assessment and/or insertion. Such collaborations also further NASA s goal to provide a safe and healthy environment for human exploration. The Tech Watch project addresses requirements and capabilities identified by knowledge and technology gaps that are derived from a discrete set of medical conditions that are most likely to occur on exploration missions. These gaps are addressed through technology readiness level assessments, market surveys, collaborations and distributed innovation opportunities. Ultimately, these gaps need to be closed with respect to exploration missions, and may be achieved through technology development projects. Information management is a key aspect to this process where Tech Watch related meetings, research articles, collaborations and partnerships are tracked by the HRP s Exploration Medical Capabilities (ExMC) Element. In 2011, ExMC will be introducing the Tech Watch external website and evidence wiki that will provide access to ExMC technology and knowledge gaps, technology needs and requirements documents.

  11. 基于皮电、心率和β波的指挥人员应急能力度量%Command Personnel Emergency Response Capability Measurement Based on Galvanic Skin, Heart Rate and β Wave

    Institute of Scientific and Technical Information of China (English)

    邓丽红; 孟恩弘; 刘微微

    2012-01-01

    It has been held by the authors that emergency response ability of command personnel is a key factor determining emergency response work efficiency, and that measuring the ability according to psychological and biological indicators is one of the premises of selecting command personnel. Relationship between the ability and emotional and physiological stresses was analyzed. E-prime software was used to induce moods through emotional Stroop effect paradigm. Changes in physiological indicators under the circumstances of physiological stress were measured by means of bio-feedback instrument. Ability condition of command personnel with high response ability was studied. Experimental results show that change rates of indicators, such as skin galvanic, heart rate, beta waves and response time of the command personnel with high response ability group before and after being under stress are significantly lower than those of the low response ability group, and that the criteria used for assessing the emergency response ability of ordinary people.%指挥人员的应急能力是决定应急工作效率的重要因素,按照生理、心理性指标度量的指挥人员的应急能力,是选择指挥人员的重要依据之一.首先,分析指挥人员应急能力与情绪、生理性应激的关系.然后,利用E-prime软件,通过情绪Stroop效应范式诱发情绪,用生物反馈仪测量生理性应激状态下生理指标变化,研究高应急能力指挥人员应具备的能力条件.试验结果表明,高应急能力组人员应激前后皮电、心率、β波以及反应时间等指标变化率显著低于低应急能力组人员.试验结果与人的应急能力分类指标相符,能力较强的指挥人员的生理指标变化率较低,适合从事应急指挥方面的工作.

  12. Response

    CERN Document Server

    CERN. Geneva

    2015-01-01

    ALICE is the LHC experiment dedicated to the study of Heavy Ion collisions. In particular, the detector features low momentum tracking and vertexing, and comprehensive particle identification capabilities. In a single central heavy ion collision at the LHC, thousands of particles per unit rapidity are produced, making the data volume, track reconstruction and search of rare signals particularly challenging. Data science and machine learning techniques could help to tackle some of the challenges outlined above. In this talk, we will discuss some early attempts to use these techniques for the processing of detector signals and for the physics analysis. We will also highlight the most promising areas for the application of these methods.

  13. Power Harvesting Capabilities of SHM Ultrasonic Sensors

    Directory of Open Access Journals (Sweden)

    Christophe Delebarre

    2012-01-01

    Full Text Available The aim of this work is to show that classical Structural Health Monitoring ultrasonic sensors may provide some power harvesting capabilities from a wide variety of vibration sources. In other words, the authors developed an integrated piezoelectric energy harvesting sensor capable of operating a dual mode, that is, carrying out vibration power harvesting and Structural Health Monitoring. First, vibrations signals of an A380 aircraft recorded during different phases of flight are presented to show the need of a wideband piezoelectric energy harvester. Then, the voltage response of a piezoelectric power harvester bonded onto an aluminium cantilever plate and excited by an electromechanical shaker is measured. A finite element model of the energy harvester system is also presented. This model provides the voltage response of the harvester due to a mechanical excitation of the host structure and allows a better understanding of the energy harvesting process. In many cases, a good agreement with the experimental results is obtained. A power measurement also showed the ability of piezoelectric SHM sensors to harvest power over an extended frequency range present in spectra collected in aircrafts. This result could lead to numerous applications even though this kind of power harvester sensor has been initially designed to operate onboard aircrafts.

  14. Developing a dispersant spraying capability

    Energy Technology Data Exchange (ETDEWEB)

    Gill, S.D.

    1979-01-01

    In developing a national dispersant spraying capability, the Canadian Coast Guard (CCG) has undertaken a modification program to enable the conventional offshore spraying gear to be mounted on almost any vessel of convenience. Smaller, more versatile inshore spraying vessels and pumps have been designed and built. With the popularization of concentrated dispersants, the inshore pumping equipment can be used aboard hovercraft for special application situations. A program of acquiring mobile dispersant storage tanks has been undertaken with auxiliary equipment that will facilitate the shipment of dispersants in bulk by air freight. Work also has commenced on extending the dispersant application program to include the CCG fleet of helicopters.

  15. Social policies related to parenthood and capabilities of Slovenian parents.

    Science.gov (United States)

    Mrčela, Aleksandra Kanjuo; Sadar, Nevenka Černigoj

    2011-01-01

    We apply Sen's capability approach to evaluate the capabilities of Slovenian parents to reconcile paid work and family in the context of the transition to a market economy. We examine how different levels of capabilities together affect the work–life balance (WLB) of employed parents. We combine both quantitative and qualitative methodological approaches. The results of our quantitative and qualitative research show that increased precariousness of employment and intensification of work create gaps between the legal and normative possibilities for successful reconciliation strategies and actual use of such arrangements in Slovenia. The existing social policies and the acceptance of gender equality in the sphere of paid work enhance capabilities for reconciliation of paid work and parenthood, whereas the intensification of working lives, the dominance of paid work over other parts of life, and the acceptance of gender inequalities in parental and household responsibilities limit parents’ capabilities to achieve WLB.

  16. Tsunami disaster risk management capabilities in Greece

    Science.gov (United States)

    Marios Karagiannis, Georgios; Synolakis, Costas

    2015-04-01

    Greece is vulnerable to tsunamis, due to the length of the coastline, its islands and its geographical proximity to the Hellenic Arc, an active subduction zone. Historically, about 10% of all world tsunamis occur in the Mediterranean region. Here we review existing tsunami disaster risk management capabilities in Greece. We analyze capabilities across the disaster management continuum, including prevention, preparedness, response and recovery. Specifically, we focus on issues like legal requirements, stakeholders, hazard mitigation practices, emergency operations plans, public awareness and education, community-based approaches and early-warning systems. Our research is based on a review of existing literature and official documentation, on previous projects, as well as on interviews with civil protection officials in Greece. In terms of tsunami disaster prevention and hazard mitigation, the lack of tsunami inundation maps, except for some areas in Crete, makes it quite difficult to get public support for hazard mitigation practices. Urban and spatial planning tools in Greece allow the planner to take into account hazards and establish buffer zones near hazard areas. However, the application of such ordinances at the local and regional levels is often difficult. Eminent domain is not supported by law and there are no regulatory provisions regarding tax abatement as a disaster prevention tool. Building codes require buildings and other structures to withstand lateral dynamic earthquake loads, but there are no provisions for resistance to impact loading from water born debris Public education about tsunamis has increased during the last half-decade but remains sporadic. In terms of disaster preparedness, Greece does have a National Tsunami Warning Center (NTWC) and is a Member of UNESCO's Tsunami Program for North-eastern Atlantic, the Mediterranean and connected seas (NEAM) region. Several exercises have been organized in the framework of the NEAM Tsunami Warning

  17. Amartya Sen's Capability Approach and Education

    Science.gov (United States)

    Walker, Melanie

    2005-01-01

    The human capabilities approach developed by the economist Amartya Sen links development, quality of life and freedom. This article explores the key ideas in the capability approach of: capability, functioning, agency, human diversity and public participation in generating valued capabilities. It then considers how these ideas relate specifically…

  18. Professionals and Public Good Capabilities

    Directory of Open Access Journals (Sweden)

    Melanie Walker

    2015-12-01

    Full Text Available Martha Nussbaum (2011 reminds us that, all over the world people are struggling for a life that is fully human - a life worthy of human dignity. Purely income-based and preference-based evaluations, as Sen (1999 argues, do not adequately capture what it means for each person to have quality of life. There are other things that make life good for a person, including access to publicly provided professional services. The question then is what version of education inflects more towards the intrinsic and transformational possibilities of professional work and contributions to decent societies? This paper suggests that we need a normative approach to professional education and professionalism; it is not the case that any old version will do. We also need normative criteria to move beyond social critique and to overcome a merely defensive attitude and to give a positive definition to the potential achievements of the professions. Moreover universities are connected to society, most especially through the professionals they educate; it is reasonable in our contemporary world to educate professional graduates to be in a position to alleviate inequalities, and to have the knowledge, skills and values to be able to do so. To make this case, we draw on the human capabilities approach of Sen (1999, 2009 and Nussbaum (2000, 2011 to conceptualise professional education for the public good as an ally of the struggles of people living in poverty and experiencing inequalities, expanding the well-being of people to be and to do in ways they have reason to value – to be mobile, cared for, respected, and so on. In particular we are interested in which human capabilities and functionings are most needed for a professional practice and professionalism that can contribute to transformative social change and how professional development is enabled via pedagogical arrangements.

  19. Resistive Plate Chamber Efficiency & Rate Capability Analysis

    Science.gov (United States)

    Candocia, Max

    2012-10-01

    Bakelite-based resistive plate chambers (RPCs) are particle detectors commonly used in muon trigger systems for high-energy physics experiments. Bakelite RPCs combine fast response, sufficient position resolution and low cost, and they can be operated at instantaneous background rates up to approximately 1.5 kHz/cm^2. Current and future collider experiments will demand operation of trigger RPCs under background rates higher than what is currently achieved. The rate capability is related to the bulk and surface conductivities of the Bakelite material used for the plates bordering the active gas volume in the RPCs. At the LHC and RHIC, these surfaces are coated with linseed oil, which lowers the surface resistivity of the Bakelite, which, to a point, improves the rate capability of the detectors. We have doped our own plates with various concentrations of carbon black. Over the past year we have tested RPCs with Bakelite plates of different resistivity using cosmic ray muons and radioactive Fe55 sources to emulate different levels of background in the detector. Results on the RPC efficiencies at different background rates and for different Bakelite coatings will be presented.

  20. Design Mechanism as Territorial Strategic Capability

    Directory of Open Access Journals (Sweden)

    Gianita BLEOJU

    2009-01-01

    Full Text Available The current exigencies that a territory must faced in order to its’ optimalpositioning in future regional competition requires the ability to design theappropriate mechanism which better valorize the territory capability. Such aconstruct is vital for territorial sustainable development and supposes thecreation of a specific body of knowledge from distinctive local resourceexploitation and unique value creation and allocation. Territorial mechanismdesign is a typical management decision about identification, ownership andcontrol of specific strategic capabilities and their combination in a distinctiveterritorial portfolio. The most difficult responsibility is to allocate the territorialvalue added which is a source of conflict among territorial components. Ourcurrent paper research covers the basics of two complementary territorialpillars-rural and tourism potential and proves the lack of specific designmechanisms which explain the current diminishing value of Galati Brailaregion. The proposed management system, relying upon territorial controlmechanism, will ensure knowledge sharing process via collaborative learning,with the final role of appropriate territorial attractivity signals, reinforcingidentity as key factor of territorial attractability. Our paper is fully documentedon there years of data analyzing from territorial area of interest. This offers usthe necessary empiric contrasting for our proposed solution.

  1. OPSAID improvements and capabilities report.

    Energy Technology Data Exchange (ETDEWEB)

    Halbgewachs, Ronald D.; Chavez, Adrian R.

    2011-08-01

    Process Control System (PCS) and Industrial Control System (ICS) security is critical to our national security. But there are a number of technological, economic, and educational impediments to PCS owners implementing effective security on their systems. Sandia National Laboratories has performed the research and development of the OPSAID (Open PCS Security Architecture for Interoperable Design), a project sponsored by the US Department of Energy Office of Electricity Delivery and Energy Reliability (DOE/OE), to address this issue. OPSAID is an open-source architecture for PCS/ICS security that provides a design basis for vendors to build add-on security devices for legacy systems, while providing a path forward for the development of inherently-secure PCS elements in the future. Using standardized hardware, a proof-of-concept prototype system was also developed. This report describes the improvements and capabilities that have been added to OPSAID since an initial report was released. Testing and validation of this architecture has been conducted in another project, Lemnos Interoperable Security Project, sponsored by DOE/OE and managed by the National Energy Technology Laboratory (NETL).

  2. Organizational Economics of Capability and Heterogeneity

    DEFF Research Database (Denmark)

    Argyres, Nicholas S.; Felin, Teppo; Foss, Nicolai Juul;

    2012-01-01

    For decades, the literatures on firm capabilities and organizational economics have been at odds with each other, specifically relative to explaining organizational boundaries and heterogeneity. We briefly trace the history of the relationship between the capabilities literature and organizationa...

  3. Sandia Laboratories technical capabilities: computation systems

    Energy Technology Data Exchange (ETDEWEB)

    1977-12-01

    This report characterizes the computation systems capabilities at Sandia Laboratories. Selected applications of these capabilities are presented to illustrate the extent to which they can be applied in research and development programs. 9 figures.

  4. DESIGNING AND MEASURING CAPABILITY. A NEW PERSPECTIVE

    Directory of Open Access Journals (Sweden)

    Ovidiu COCENESCU

    2013-01-01

    Full Text Available The concept of capability has long been a topic for debate among planners. The main benefit brought by it is that of ensuring the connection between objectives and necessary financial resources. Thus, capability is a median element within the process of integrated planning. In this context, there are sceptics who consider that capability cannot be measured. However, this article aims at presenting a pattern and a formula for measuring and interpreting the level of capability.

  5. STRATEGIC AIRLIFT CAPABILITY: FROM THEORY TO PRACTICE

    OpenAIRE

    Cezar VASILESCU

    2011-01-01

    Strategic airlift remains a critical supporting capability that should be achieved, maintained and improved. This capability ensures the ability to deploy and sustain military forces across possible distant battlefields. The paper analyses the growing strategic airlift capabilities gap between operational needs and current realities, and underlines the need for an enhanced strategic airlift capability to meet current and future NATO alliance needs. By analyzing requirements against the existi...

  6. The capabilities conception of the individual

    NARCIS (Netherlands)

    Davis, J.B.

    2009-01-01

    This paper advances a capabilities conception of the individual, and considers some of the problems involved in developing such a conception. It also makes claims about the nature of the capability space as a whole, frames personal development in terms of the idea of moving though the capability spa

  7. Biotechnology: Opportunities to Enhance Army Capabilities

    Science.gov (United States)

    1989-12-01

    capabilities for field repair. Also, bioplastics could replace traditional synthetic materials used in equipment because of I greater strength, lighter...robots will require many of the same novel synthetic raterials as commercial robots. However, bioceramics, biopolymers, and bioplastics more suited...biological capability or performance enhanced by electronic or electrochemical devices I Bioplast - a minute quantity of living protoplasm capable of

  8. Selecting Capabilities for Quality of Life Measurement

    Science.gov (United States)

    Robeyns, Ingrid

    2005-01-01

    The capability approach advocates that interpersonal comparisons be made in the space of functionings and capabilities. However, Amartya Sen has not specified which capabilities should be selected as the relevant ones. This has provoked two types of criticism. The stronger critique is Martha Nussbaum's claim that Sen should endorse one specific…

  9. Kurumlar-Arası Sistem Kullanımının İşletme Performansı Üzerindeki Etkisinde Tedarik Zinciri İşbirliğinin Aracılık Rolünün Analizi: Türk İnşaat Sektöründe Bir Uygulama(The Analysis of The Mediation Role of Supply Chain Collaboration on The Effect of Inter-Organizational System Usage to Firm Performance: An Application in Turkish Construction Sector

    Directory of Open Access Journals (Sweden)

    Cengiz YILMAZ

    2016-04-01

    Full Text Available Genel olarak kurumlar-arası sistemler (KS olarak bilinen internet tabanlı teknolojiler, işletmeleri tedarik zincirlerindeki ortaklar ile bütünleştirirler ve işletmelere süreçlerini optimize edebilme fırsatı verirler. Bu çalışmada, işletmelerin kendi başarıları yerine tedarik zincirinin bütünününde elde edilebilecek başarıyı hedef alarak, kurumlar-arası sistemlerin işletme performansına olan etkisinde tedarik zinciri işbirliğinin aracılık rolü hakkında daha fazla bilgi sahibi olabilmek için Türk inşaat sektöründe yapılan bir uygulama çalışmasını konu edinmektedir. Türk inşaat sektöründe yapılan bu çalışmadan 138 tane kullanılabilir anket elde edilmiştir ve çalışma analizleri bu anketlerin verilerine göre yapısal eşitlik modellemesi (Lisrel ile kullanılarak yapılmıştır. Araştırma sonuçları, KS kullanımı işletme performansına etki ederken tedarik zinciri işbirliğinin tam bir aracılık rolü üstlendiğini desteklemektedir. Çalışma, bu nedenle tedarik zinciri işbirliğinin kullanımında ve yönetilmesinde ortaklaşa yapılan çalışmaların önemini vurgulamaktadır. Araştırmanın sonunda ise ileride yapılabilecek çalışmalar için öneriler sunulmuştur Internet based technologies, particularly inter-organizational systems (IOS, integrates firms with their supply chain members and give them the opportunity to optimize their processes. So, by working together, firms achieve greater successes than working alone. This study aims this holistic success instead of individual, so in order to have more information about this issue, it examines the mediation role of supply chain collaboration while inter-organizational systems affect the firm performance. Data are collected from national construction sector and 138 usable responses were taken. The statistical methods used include confirmatory factor analysis and structural equation modelling (i.e. LISREL. According to

  10. Facility Interface Capability Assessment (FICA) user manual

    Energy Technology Data Exchange (ETDEWEB)

    Pope, R.B. [ed.] [Oak Ridge National Lab., TN (United States); MacDonald, R.R. [ed.] [Civilian Radioactive Waste Management System, Vienna, VA (United States); Massaglia, J.L.; Williamson, D.A. [Civilian Radioactive Waste Management System, Vienna, VA (United States); Viebrock, J.M.; Mote, N. [Nuclear Assurance Corp., Norcross, GA (United States)

    1995-09-01

    The US Department of Energy`s (DOE) Office of Civilian Radioactive Waste Management (OCRWM) is responsible for developing the Civilian Radioactive Waste Management System (CRWMS) to accept spent nuclear fuel from commercial facilities. The objective of the Facility Interface Capability Assessment (FICA) project was to assess the capability of each commercial spent nuclear fuel (SNF) storage facility, at which SNF is stored, to handle various SNF shipping casks. The purpose of this report is describe the FICA computer software and to provide the FICA user with a guide on how to use the FICA system. The FICA computer software consists of two executable programs: the FICA Reactor Report program and the FICA Summary Report program (written in the Ca-Clipper version 5.2 development system). The complete FICA software system is contained on either a 3.5 in. (double density) or a 5.25 in. (high density) diskette and consists of the two FICA programs and all the database files (generated using dBASE III). The FICA programs are provided as ``stand alone`` systems and neither the Ca-Clipper compiler nor dBASE III is required to run the FICA programs. The steps for installing the FICA software system and executing the FICA programs are described in this report. Instructions are given on how to install the FICA software system onto the hard drive of the PC and how to execute the FICA programs from the FICA subdirectory on the hard drive. Both FICA programs are menu driven with the up-arrow and down-arrow keys used to move the cursor to the desired selection.

  11. Russian research capabilities: Findings of site visits

    Energy Technology Data Exchange (ETDEWEB)

    Wester, D.W.

    1994-02-01

    In June 1993, a proposal was presented to the International Environmental Institute (IEI) in Kennewick, Washington, to establish cooperation and coordination to further pursue the interests of the United States of America and the Republic of Russia in the application and promotion of environmental technology; characterization, treatment, handling, isolation, and disposal of hazardous and radioactive materials; conversion of defense sites to other purposes; and technology transfer, cooperative programs, joint technology development and contractual research. In response to this proposal, IEI and Pacific Northwest Laboratory (PNL) jointly provided funding to send Dr. Dennis W. Wester on a fact-finding mission to Novosibirsk, Moscow, and St. Petersburg, Russia. The trip covered a period of eight weeks, six of which were spent in Novosibirsk and adjoining or related cities and one of which was spent in each of Moscow and St. Petersburg. The general objectives of the trip were to establish a basis for cooperation between IEI and the Russian Academy of Sciences (RAS) for future coordination of mutual interests and objectives such as technology acquisition, development, demonstration, application, and commercialization; use of capabilities and assets developed by the U.S. Department of Energy (DOE) and the RAS; and expediting of cooperative agreements, personnel exchanges, joint ventures and other contractual relationships. The particular objectives of this trip were to evaluate the capabilities of the RAS to satisfy the technology needs associated with the cleanup of the Hanford Site and similar sites in the U.S. and to evaluate the expediency of establishing an IEI presence in Russia.

  12. VOLTAGE MONITORING INSTRUMENT WITH FAST-TRANSIENTS CAPTURE CAPABILITY

    Directory of Open Access Journals (Sweden)

    M. Gracida-Aguirre

    2003-09-01

    Full Text Available A monitoring instrument aimed at recording the voltage levels at residential installations is described. Its main feature is the capability ot recording short transients, lasting less than one cycle, while requiring a rather modest amount of memory for long monitoring periods. The instrument uses synchronous sampling of the voltage waveform, and its response to outages has been optimized.

  13. Variable Speed Wind Turbines Capability for Temporary Over-Production

    DEFF Research Database (Denmark)

    Tarnowski, Germán Claudio; Kjær, Philip Carne; Sørensen, Poul Ejnar

    2009-01-01

    New control systems for Variable Speed Wind Turbines (VSWT) need to be developed in order to provide inertia response and frequency control to support the grid. This work studies the behavior and capability of VSWT for providing temporary active power overproduction. The study is conducted on a m...

  14. Low Cost Sensors-Current Capabilities and Gaps

    Science.gov (United States)

    1. Present the findings from the a recent technology review of gas and particulate phase sensors 2. Focus on the lower-cost sensors 3. Discuss current capabilities, estimated range of measurement, selectivity, deployment platforms, response time, and expected range of acceptabl...

  15. 77 FR 20497 - National Financial Capability Month, 2012

    Science.gov (United States)

    2012-04-05

    ... economy requires responsibility from top to bottom--from banks and borrowers to workers and executives. To... action to empower individuals and families with the tools they need to get ahead. Last year, we... and save for retirement; and to foster financial capability in families and communities across...

  16. SAMHD1 is a biomarker for cytarabine response and a therapeutic target in acute myeloid leukemia.

    OpenAIRE

    Schneider, Constanze; Oellerich, Thomas; Baldauf, Hanna-Mari; Schwarz, Sarah-Marie; Thomas, Dominique; Flick, Robert; Bohnenberger, Hanibal; Kaderali, Lars; Stegmann, Lena; Cremer, Anjali; Martin, Margarethe; Lohmeyer, Julian; Michaelis, Martin; Hornung, Veit; Schliemann, Christoph

    2016-01-01

    The nucleoside analog cytarabine (Ara-C) is an essential component of primary and salvage chemotherapy regimens for acute myeloid leukemia (AML). After cellular uptake, Ara-C is converted into its therapeutically active triphosphate metabolite, Ara-CTP, which exerts antileukemic effects, primarily by inhibiting DNA synthesis in proliferating cells. Currently, a substantial fraction of patients with AML fail to respond effectively to Ara-C therapy, and reliable biomarkers for predicting the th...

  17. A comprehensive estimation method for enterprise capability

    Directory of Open Access Journals (Sweden)

    Tetiana Kuzhda

    2015-11-01

    Full Text Available In today’s highly competitive business world, the need for efficient enterprise capability management is greater than ever. As more enterprises begin to compete on a global scale, the effective use of enterprise capability will become imperative for them to improve their business activities. The definition of socio-economic capability of the enterprise has been given and the main components of enterprise capability have been pointed out. The comprehensive method to estimate enterprise capability that takes into account both social and economic components has been offered. The methodical approach concerning integrated estimation of the enterprise capability has been developed. Novelty deals with the inclusion of summary measure of the social component of enterprise capability to define the integrated index of enterprise capability. The practical significance of methodological approach is that the method allows assessing the enterprise capability comprehensively through combining two kinds of estimates – social and economic and converts them into a single integrated indicator. It provides a comprehensive approach to socio-economic estimation of enterprise capability, sets a formal basis for making decisions and helps allocate enterprise resources reasonably. Practical implementation of this method will affect the current condition and trends of the enterprise, help to make forecasts and plans for its development and capability efficient use.

  18. Capability Development in an Offshoring Context

    DEFF Research Database (Denmark)

    Jaura, Manya

    Capability development can be defined as deliberate firm-level investment involving a search and learning process aimed at modifying or enhancing existing capabilities. Increasingly, firms are relocating advanced services to offshore locations resulting in the challenge of capability development...... in the offshore unit. Guided by the research question – what drives or impedes capability development in an offshoring context – the purpose of this thesis is to investigate how an idiosyncratic offshoring context affects capability development. The thesis consists of three papers using various datasets...... and qualitative methods that investigate capability development in an offshoring context. The first paper investigates how capability development takes place for a service-provider firm at the activity level. The second paper examines the transition made by a captive offshore unit, from performing standardized...

  19. Activity-based resource capability modeling

    Institute of Scientific and Technical Information of China (English)

    CHENG Shao-wu; XU Xiao-fei; WANG Gang; SUN Xue-dong

    2008-01-01

    To analyse and optimize a enterprise process in a wide scope, an activity-based method of modeling resource capabilities is presented. It models resource capabilities by means of the same structure as an activity, that is, resource capabilities are defined by input objects, actions and output objects. A set of activity-based re-source capability modeling rules and matching rules between an activity and a resource are introduced. This method can not only be used to describe capability of manufacturing tools, but also capability of persons and applications, etc. It unifies methods of modeling capability of all kinds of resources in an enterprise and supports the optimization of the resource allocation of a process.

  20. Distinctive Dynamic Capabilities for New Business Creation

    DEFF Research Database (Denmark)

    Rosenø, Axel; Enkel, Ellen; Mezger, Florian

    2013-01-01

    This study examines the distinctive dynamic capabilities for new business creation in established companies. We argue that these are very different from those for managing incremental innovation within a company's core business. We also propose that such capabilities are needed in both slow...... and fast-paced industries, and that similarities exist across industries. Hence, the study contributes to dynamic capabilities literature by: 1) identifying the distinctive dynamic capabilities for new business creation; 2) shifting focus away from dynamic capabilities in environments characterised by high...... clock-speed and uncertainty towards considering dynamic capabilities for the purpose of developing new businesses, which also implies a high degree of uncertainty. Based on interviews with 33 companies, we identify distinctive dynamic capabilities for new business creation, find that dynamic...

  1. Consolidating AMC’s Contingency Response Capabilities: A Delphi Study

    Science.gov (United States)

    2015-06-19

    group research in an anonymous and isolated method, the process removes normative behaviors , balances individual participation, promotes proactive idea... social -emotional rewards often found when problem solving in an in-person problem solving effort (Delbecq, Van de Ven, & Gustafson, 1975). This lack of...Program, overburdened AMW/CC due to mission schizophrenia , and reduced focus on CR mission by 18 AF. RA NK AGREE OR DISAGREE WITH DISADVANTAGES OF AMW

  2. Sustaining Statewide Disaster Response Capabilities from a Fire Service Perspective

    Science.gov (United States)

    2013-03-01

    quote was taken from an abstract written by Jena Baker McNeill , who is a Senior Policy Analyst for homeland security for the Heritage Foundation... McNeill , 2011). The President’s 2012 budget request would maintain homeland security funding at current levels, but the budget request would increase...of Arts (Security Studies)). Naval Postgraduate School, Monterey, California. (743227784). McNeill , J. B. (2011). Checkbook homeland security

  3. Requirements Development for Interoperability Simulation Capability for Law Enforcement

    Energy Technology Data Exchange (ETDEWEB)

    Holter, Gregory M.

    2004-05-19

    The National Counterdrug Center (NCC) was initially authorized by Congress in FY 1999 appropriations to create a simulation-based counterdrug interoperability training capability. As the lead organization for Research and Analysis to support the NCC, the Pacific Northwest National Laboratory (PNNL) was responsible for developing the requirements for this interoperability simulation capability. These requirements were structured to address the hardware and software components of the system, as well as the deployment and use of the system. The original set of requirements was developed through a process of conducting a user-based survey of requirements for the simulation capability, coupled with an analysis of similar development efforts. The user-based approach ensured that existing concerns with respect to interoperability within the law enforcement community would be addressed. Law enforcement agencies within the designated pilot area of Cochise County, Arizona, were surveyed using interviews and ride-alongs during actual operations. The results of this survey were then accumulated, organized, and validated with the agencies to ensure the accuracy of the results. These requirements were then supplemented by adapting operational requirements from existing systems to ensure system reliability and operability. The NCC adopted a development approach providing incremental capability through the fielding of a phased series of progressively more capable versions of the system. This allowed for feedback from system users to be incorporated into subsequent revisions of the system requirements, and also allowed the addition of new elements as needed to adapt the system to broader geographic and geopolitical areas, including areas along the southwest and northwest U.S. borders. This paper addresses the processes used to develop and refine requirements for the NCC interoperability simulation capability, as well as the response of the law enforcement community to the use of

  4. Purine analog-like properties of bendamustine underlie rapid activation of DNA damage response and synergistic effects with pyrimidine analogues in lymphoid malignancies.

    Directory of Open Access Journals (Sweden)

    Nobuya Hiraoka

    Full Text Available Bendamustine has shown considerable clinical activity against indolent lymphoid malignancies as a single agent or in combination with rituximab, but combination with additional anti-cancer drugs may be required for refractory and/or relapsed cases as well as other intractable tumors. In this study, we attempted to determine suitable anti-cancer drugs to be combined with bendamustine for the treatment of mantle cell lymphoma, diffuse large B-cell lymphoma, aggressive lymphomas and multiple myeloma, all of which are relatively resistant to this drug, and investigated the mechanisms underlying synergism. Isobologram analysis revealed that bendamustine had synergistic effects with alkylating agents (4-hydroperoxy-cyclophosphamide, chlorambucil and melphalan and pyrimidine analogues (cytosine arabinoside, gemcitabine and decitabine in HBL-2, B104, Namalwa and U266 cell lines, which represent the above entities respectively. In cell cycle analysis, bendamustine induced late S-phase arrest, which was enhanced by 4-hydroperoxy-cyclophosphamide, and potentiated early S-phase arrest by cytosine arabinoside (Ara-C, followed by a robust increase in the size of sub-G1 fractions. Bendamustine was able to elicit DNA damage response and subsequent apoptosis faster and with shorter exposure than other alkylating agents due to rapid intracellular incorporation via equilibrative nucleoside transporters (ENTs. Furthermore, bendamustine increased the expression of ENT1 at both mRNA and protein levels and enhanced the uptake of Ara-C and subsequent increase in Ara-C triphosphate (Ara-CTP in HBL-2 cells to an extent comparable with the purine analog fludarabine. These purine analog-like properties of bendamustine may underlie favorable combinations with other alkylators and pyrimidine analogues. Our findings may provide a theoretical basis for the development of more effective bendamustine-based combination therapies.

  5. Business Systems Branch Abilities, Capabilities, and Services Web Page

    Science.gov (United States)

    Cortes-Pena, Aida Yoguely

    2009-01-01

    During the INSPIRE summer internship I acted as the Business Systems Branch Capability Owner for the Kennedy Web-based Initiative for Communicating Capabilities System (KWICC), with the responsibility of creating a portal that describes the services provided by this Branch. This project will help others achieve a clear view ofthe services that the Business System Branch provides to NASA and the Kennedy Space Center. After collecting the data through the interviews with subject matter experts and the literature in Business World and other web sites I identified discrepancies, made the necessary corrections to the sites and placed the information from the report into the KWICC web page.

  6. The Nike Laser Facility and its Capabilities

    Science.gov (United States)

    Serlin, V.; Aglitskiy, Y.; Chan, L. Y.; Karasik, M.; Kehne, D. M.; Oh, J.; Obenschain, S. P.; Weaver, J. L.

    2013-10-01

    The Nike laser is a 56-beam krypton fluoride (KrF) system that provides 3 to 4 kJ of laser energy on target. The laser uses induced spatial incoherence to achieve highly uniform focal distributions. 44 beams are overlapped onto target with peak intensities up to 1016 W/cm2. The effective time-averaged illumination nonuniformity is Nike produces highly uniform ablation pressures on target allowing well-controlled experiments at pressures up to 20 Mbar. The other 12 laser beams are used to generate diagnostic x-rays radiographing the primary laser-illuminated target. The facility includes a front end that generates the desired temporal and spatial laser profiles, two electron-beam pumped KrF amplifiers, a computer-controlled optical system, and a vacuum target chamber for experiments. Nike is used to study the physics and technology issues of direct-drive laser fusion, such as, hydrodynamic and laser-plasma instabilities, studies of the response of materials to extreme pressures, and generation of X rays from laser-heated targets. Nike features a computer-controlled data acquisition system, high-speed, high-resolution x-ray and visible imaging systems, x-ray and visible spectrometers, and cryogenic target capability. Work supported by DOE/NNSA.

  7. Atmospheric Release Advisory Capability Pilot Project at Two Nuclear Power Plants and Associated State Offices of Emergency Preparedness.

    Science.gov (United States)

    1983-01-01

    CPS andiPs..................4 MATHEW. .. ....... .......... 5 ADPIC . ... ........ ......... 5 PATRIC .. .. ........ ......... 5 III. Utilization of...due to a unit release rate. All contours are calculated by employing the MATHEW/ ADPIC codes ..... .. ...................... ... 15 8. Representative...ARAC model calculations employing MATHEW/ ADPIC codes during the January 19, 1982, test at Rancho Seco. (a) Deposition of 1-131 for a unit source rate

  8. Analysis of the Capability Portfolio Review (CPR)

    Science.gov (United States)

    2014-06-01

    TRAC-M-TR-14-021 June 2014 Analysis of the Capability Portfolio Review ( CPR ) TRADOC Analysis Center 700...INTENTIONALLY LEFT BLANK TRAC-M-TR-14-021 June 2014 Analysis of the Capability Portfolio Review ( CPR ) Authors LTC Thomas Deveans...4. TITLE AND SUBTITLE Analysis of the Capability Portfolio Review ( CPR ) 5. PROJECT NUMBERS TRAC Project Code 060097 6. AUTHOR(S) LTC Deveans

  9. Compilation of Sandia Laboratories technical capabilities

    Energy Technology Data Exchange (ETDEWEB)

    Lundergan, C. D.; Mead, P. L. [eds.

    1975-11-01

    This report is a compilation of 17 individual documents that together summarize the technical capabilities of Sandia Laboratories. Each document in this compilation contains details about a specific area of capability. Examples of application of the capability to research and development problems are provided. An eighteenth document summarizes the content of the other seventeen. Each of these documents was issued with a separate report number (SAND 74-0073A through SAND 74-0091, except -0078). (RWR)

  10. Dynamic Capabilities within the Project Management Environment

    OpenAIRE

    2015-01-01

    Dynamic Capabilities is a contemporary popular notion, incorporating the ability to adjust a company’s resources adequately to exploit opportunities, prevent threats and consequently retain competitive advantage. Teece et al. (1997) coined Dynamic Capabilities and triggered a wave of research on the topic. However the notion is still in its infancy through academic disputes, different viewpoints and multiple definitions. Consequently tool, measure and procedures of Dynamic Capabilities are ab...

  11. Evaluating Internal Technological Capabilities in Energy Companies

    OpenAIRE

    Mingook Lee; Sungjoo Lee

    2016-01-01

    As global competition increases, technological capability must be evaluated objectively as one of the most important factors for predominance in technological competition and to ensure sustainable business excellence. Most existing capability evaluation models utilize either quantitative methods, such as patent analysis, or qualitative methods, such as expert panels. Accordingly, they may be in danger of reflecting only fragmentary aspects of technological capabilities, and produce inconsiste...

  12. Understanding dynamic capabilities through knowledge management

    DEFF Research Database (Denmark)

    Nielsen, Anders Paarup

    2006-01-01

    In the paper eight knowledge management activities are identified; knowledge creation, acquisition, capture, assembly, sharing, integration, leverage and exploitation. These activities are assembled into the three dynamic capabilities of knowledge development, knowledge (re)combination and knowle......In the paper eight knowledge management activities are identified; knowledge creation, acquisition, capture, assembly, sharing, integration, leverage and exploitation. These activities are assembled into the three dynamic capabilities of knowledge development, knowledge (re......)combination and knowledge use. The dynamic capabilities and the associated knowledge management activities create flows to and from the firm’s stock of knowledge and they support the creation and use of organizational capabilities....

  13. Developing Technological Capabilities in Agro-Industry

    DEFF Research Database (Denmark)

    Whitfield, Lindsay

    2012-01-01

    This article examines the emergence and trajectory of a new agro-industry in Ghana, the pineapple export industry, using the technological capabilities approach. It explains the limited expansion of the industry and its declining competitiveness in the face of new competition by looking at how...... Ghanaian exporters developed technological capabilities initially and the incentives and disincentives to building on those capabilities. The article argues that at the heart of the industry's crisis was an inability to further develop technological capabilities. The crisis had systemic features that have...

  14. Aerodynamics Laboratory Facilities, Equipment, and Capabilities

    Data.gov (United States)

    Federal Laboratory Consortium — The following facilities, equipment, and capabilities are available in the Aerodynamics Laboratory Facilities and Equipment (1) Subsonic, open-jet wind tunnel with...

  15. The Renovation and Future Capabilities of the Thacher Observatory

    Science.gov (United States)

    O'Neill, Katie; Osuna, Natalie; Edwards, Nick; Klink, Douglas; Swift, Jonathan; Vyhnal, Chris; Meyer, Kurt

    2016-01-01

    The Thacher School is in the process of renovating the campus observatory with a new meter class telescope and full automation capabilities for the purpose of scientific research and education. New equipment on site has provided a preliminary site characterization including seeing and V-band sky brightness measurements. These data, along with commissioning data from the MINERVA project (which uses comparable hardware) are used to estimate the capabilities of the observatory once renovation is complete. Our V-band limiting magnitude is expected to be better than 21.3 for a one minute integration time, and we estimate that milli-magnitude precision photometry will be possible for a V=14.5 point source over approximately 5 min timescales. The quick response, autonomous operation, and multi-band photometric capabilities of the renovated observatory will make it a powerful follow-up science facility for exoplanets, eclipsing binaries, near-Earth objects, stellar variability, and supernovae.

  16. A framework for offshore vendor capability development

    Science.gov (United States)

    Yusuf Wibisono, Yogi; Govindaraju, Rajesri; Irianto, Dradjad; Sudirman, Iman

    2016-02-01

    Offshore outsourcing is a common practice conducted by companies, especially in developed countries, by relocating one or more their business processes to other companies abroad, especially in developing countries. This practice grows rapidly owing to the ease of accessing qualified vendors with a lower cost. Vendors in developing countries compete more intensely to acquire offshore projects. Indonesia is still below India, China, Malaysia as main global offshore destinations. Vendor capability is among other factors that contribute to the inability of Indonesian vendor in competing with other companies in the global market. Therefore, it is essential to study how to increase the vendor's capability in Indonesia, in the context of global offshore outsourcing. Previous studies on the vendor's capability mainly focus on capabilities without considering the dynamic of capabilities due to the environmental changes. In order to be able to compete with competitors and maintain the competitive advantage, it is necessary for vendors to develop their capabilities continuously. The purpose of this study is to develop a framework that describes offshore vendor capability development along the client-vendor relationship stages. The framework consists of three main components, i.e. the stages of client-vendor relationship, the success of each stage, and the capabilities of vendor at each stage.

  17. Methodological Individualism and the Organizational Capabilities Approach

    DEFF Research Database (Denmark)

    Felin, Teppo; Foss, Nicolai Juul

    2004-01-01

    critical individual-levelconsiderations, including individual action and heterogeneity. In this note we do not denyor reject the notion of routines or capabilities per se, but rather call for an increasedemphasis on how these collective structures originate and change as a result of individualactions.......Key words: Organizational capabilities, methodological individualism, philosophy ofsocial science...

  18. Methodological Individualism and the Organizational Capabilities Approach

    DEFF Research Database (Denmark)

    Felin, Teppo; Foss, Nicolai Juul

    2004-01-01

    critical individual-levelconsiderations, including individual action and heterogeneity. In this note we do not denyor reject the notion of routines or capabilities per se, but rather call for an increasedemphasis on how these collective structures originate and change as a result of individualactions.......Key words: Organizational capabilities, methodological individualism, philosophy ofsocial science...

  19. Design for Development: A Capability Approach

    NARCIS (Netherlands)

    Oosterlaken, I.

    2009-01-01

    In this article I suggest a ‘capability approach’ towards designing for society, and particularly, the world’s poor. I will explain that this approach assigns a central place to human capabilities in our discussions of justice and development and criticizes a focus on utility or preference satisfact

  20. Cultivating Human Capabilities in Venturesome Learning Environments

    Science.gov (United States)

    Hogan, Padraig

    2013-01-01

    The notion of competencies has been a familiar feature of educational reform policies for decades. In this essay, Padraig Hogan begins by highlighting the contrasting notion of capabilities, pioneered by the research of Amartya Sen and Martha Nussbaum. An educational variant of the notion of capabilities then becomes the basis for exploring…

  1. Technology support for military capability based acquisition

    CSIR Research Space (South Africa)

    Thaba, Mphahlela

    2017-05-01

    Full Text Available gap between capability planning and acquisition of product systems in the SANDF. (Thaba J et al, 2015). The need for decision support tools and technologies to assist capability planners to close this gap and make sound decisions has become more...

  2. Knowledge Perspectives on Advancing Dynamic Capability

    NARCIS (Netherlands)

    van Reijsen, J.

    2014-01-01

    Dynamic Capability is the organizational capacity to timely adapt to a changing market environment by reconfiguring resources and routines in order to stay competitive. Although dynamic capability is considered the Holy Grail of strategic management, a connection to the knowledge management domain i

  3. Distinctive Dynamic Capabilities for New Business Creation

    DEFF Research Database (Denmark)

    Rosenø, Axel; Enkel, Ellen; Mezger, Florian

    2013-01-01

    This study examines the distinctive dynamic capabilities for new business creation in established companies. We argue that these are very different from those for managing incremental innovation within a company's core business. We also propose that such capabilities are needed in both slow...

  4. Building Organisational Capability the Private Provider Way

    Science.gov (United States)

    Guthrie, Hugh

    2008-01-01

    Organisational capability is recognised as a key to organisational success. The combination of human capital (peoples' skills and knowledge), social capital (relationships between people) and organisational capital (the organisation's processes), is central to building an organisation's capability. This paper, presented at the 2008 annual…

  5. STRATEGIC AIRLIFT CAPABILITY: FROM THEORY TO PRACTICE

    Directory of Open Access Journals (Sweden)

    Cezar VASILESCU

    2011-01-01

    Full Text Available Strategic airlift remains a critical supporting capability that should be achieved, maintained and improved. This capability ensures the ability to deploy and sustain military forces across possible distant battlefields. The paper analyses the growing strategic airlift capabilities gap between operational needs and current realities, and underlines the need for an enhanced strategic airlift capability to meet current and future NATO alliance needs. By analyzing requirements against the existing/potential solutions, this paper further ponders over options like the organic national capability, partnerships such as the Strategic Airlift Consortium (SAC or leasing aircraft through a venture such as the Strategic Airlift Interim Solution (SALIS. The paper also evaluates the feasibility of applying these solutions to European Union airlift needs.

  6. Analytical Chemistry Core Capability Assessment - Preliminary Report

    Energy Technology Data Exchange (ETDEWEB)

    Barr, Mary E. [Los Alamos National Laboratory; Farish, Thomas J. [Los Alamos National Laboratory

    2012-05-16

    The concept of 'core capability' can be nebulous one. Even at a fairly specific level, where core capability equals maintaining essential services, it is highly dependent upon the perspective of the requestor. Samples are submitted to analytical services because the requesters do not have the capability to conduct adequate analyses themselves. Some requests are for general chemical information in support of R and D, process control, or process improvement. Many analyses, however, are part of a product certification package and must comply with higher-level customer quality assurance requirements. So which services are essential to that customer - just those for product certification? Does the customer also (indirectly) need services that support process control and improvement? And what is the timeframe? Capability is often expressed in terms of the currently utilized procedures, and most programmatic customers can only plan a few years out, at best. But should core capability consider the long term where new technologies, aging facilities, and personnel replacements must be considered? These questions, and a multitude of others, explain why attempts to gain long-term consensus on the definition of core capability have consistently failed. This preliminary report will not try to define core capability for any specific program or set of programs. Instead, it will try to address the underlying concerns that drive the desire to determine core capability. Essentially, programmatic customers want to be able to call upon analytical chemistry services to provide all the assays they need, and they don't want to pay for analytical chemistry services they don't currently use (or use infrequently). This report will focus on explaining how the current analytical capabilities and methods evolved to serve a variety of needs with a focus on why some analytes have multiple analytical techniques, and what determines the infrastructure for these analyses. This

  7. 制度因素、顾客响应能力与经营绩效--国有与民营企业的对比研究%Institutional Factors, Customer Response Capability and Business Performance-A Comparative Study between State-owned Enterprises and Private Enterprises

    Institute of Scientific and Technical Information of China (English)

    李巍

    2014-01-01

    Customer response capability (CRC) is the critical capability in strategic management, and is also the key that en-terprises achieve and sustain market competitive advantages. The paper, drawing on institutional theory, undertaking the the-oretical framework of regulative, normative and cultural-cognitive basic systems, using empirical data collected from 247 en-terprises, identifies and verifies the impacts of three types of institutional factors: the adaptive organizational structure, mar-ket-focused organization learning, and top management team risk preference on CRC, and the relationship between CRC and business performance. Then the paper analyzes the differences of above relations under two different ownerships in order to deepen the understanding on the relations of institutional factors, CRC and business performance.%顾客响应能力是企业战略管理领域的重要能力类型,是企业获取持续竞争优势的关键。文章借鉴制度理论观点,以制度因素的管制、规范和文化认知三大基础系统为理论框架,运用247家企业实证数据,识别并验证适应性组织结构、市场聚焦型组织学习和高管团队风险偏好三类制度因素对顾客响应能力的影响作用,以及顾客响应能力与经营绩效的关系;随后在两类所有制形式下,考察上述关系差异性,深化对制度因素、顾客响应能力与经营绩效关系的理解。

  8. National Atmospheric Release Advisory Center (NARAC) Capabilities for Homeland Security

    Energy Technology Data Exchange (ETDEWEB)

    Sugiyama, G; Nasstrom, J; Baskett, R; Simpson, M

    2010-03-08

    The Department of Energy's National Atmospheric Release Advisory Center (NARAC) provides critical information during hazardous airborne releases as part of an integrated national preparedness and response strategy. Located at Lawrence Livermore National Laboratory, NARAC provides 24/7 tools and expert services to map the spread of hazardous material accidentally or intentionally released into the atmosphere. NARAC graphical products show affected areas and populations, potential casualties, and health effect or protective action guideline levels. LLNL experts produce quality-assured analyses based on field data to assist decision makers and responders. NARAC staff and collaborators conduct research and development into new science, tools, capabilities, and technologies in strategically important areas related to airborne transport and fate modeling and emergency response. This paper provides a brief overview of some of NARAC's activities, capabilities, and research and development.

  9. Community psychology and the capabilities approach.

    Science.gov (United States)

    Shinn, Marybeth

    2015-06-01

    What makes for a good life? The capabilities approach to this question has much to offer community psychology, particularly with respect to marginalized groups. Capabilities are freedoms to engage in valued social activities and roles-what people can do and be given both their capacities, and environmental opportunities and constraints. Economist Amartya Sen's focus on freedoms and agency resonates with psychological calls for empowerment, and philosopher Martha Nussbaum's specification of requirements for a life that is fully human provides an important guide for social programs. Community psychology's focus on mediating structures has much to offer the capabilities approach. Parallels between capabilities, as enumerated by Nussbaum, and settings that foster positive youth development, as described in a National Research Council Report (Eccles and Gootman (Eds) in Community programs to promote youth development. National Academy Press, Washington, 2002) suggest extensions of the approach to children. Community psychologists can contribute to theory about ways to create and modify settings to enhance capabilities as well as empowerment and positive youth development. Finally, capabilities are difficult to measure, because they involve freedoms to choose but only choices actually made or enacted can be observed. The variation in activities or goals across members of a setting provides a measure of the capabilities that the setting fosters.

  10. CTH reference manual : composite capability and technologies.

    Energy Technology Data Exchange (ETDEWEB)

    Key, Christopher T.; Schumacher, Shane C.

    2009-02-01

    The composite material research and development performed over the last year has greatly enhanced the capabilities of CTH for non-isotropic materials. The enhancements provide the users and developers with greatly enhanced capabilities to address non-isotropic materials and their constitutive model development. The enhancements to CTH are intended to address various composite material applications such as armor systems, rocket motor cases, etc. A new method for inserting non-isotropic materials was developed using Diatom capabilities. This new insertion method makes it possible to add a layering capability to a shock physics hydrocode. This allows users to explicitly model each lamina of a composite without the overhead of modeling each lamina as a separate material to represent a laminate composite. This capability is designed for computational speed and modeling efficiency when studying composite material applications. In addition, the layering capability also allows a user to model interlaminar mechanisms. Finally, non-isotropic coupling methods have been investigated. The coupling methods are specific to shock physics where the Equation of State (EOS) is used with a nonisotropic constitutive model. This capability elastically corrects the EOS pressure (typically isotropic) for deviatoric pressure coupling for non-isotropic materials.

  11. Evaluating Internal Technological Capabilities in Energy Companies

    Directory of Open Access Journals (Sweden)

    Mingook Lee

    2016-03-01

    Full Text Available As global competition increases, technological capability must be evaluated objectively as one of the most important factors for predominance in technological competition and to ensure sustainable business excellence. Most existing capability evaluation models utilize either quantitative methods, such as patent analysis, or qualitative methods, such as expert panels. Accordingly, they may be in danger of reflecting only fragmentary aspects of technological capabilities, and produce inconsistent results when different models are used. To solve these problems, this paper proposes a comprehensive framework for evaluating technological capabilities in energy companies by considering the complex properties of technological knowledge. For this purpose, we first explored various factors affecting technological capabilities and divided the factors into three categories: individual, organizational, and technology competitiveness. Second, we identified appropriate evaluation items for each category to measure the technological capability. Finally, by using a hybrid approach of qualitative and quantitative methods, we developed an evaluation method for each item and suggested a method to combine the results. The proposed framework was then verified with an energy generation and supply company to investigate its practicality. As one of the earliest attempts to evaluate multi-faceted technological capabilities, the suggested model can support technology and strategic planning.

  12. Community Psychology and the Capabilities Approach

    Science.gov (United States)

    2016-01-01

    What makes for a good life? The capabilities approach to this question has much to offer community psychology, particularly with respect to marginalized groups. Capabilities are freedoms to engage in valued social activities and roles—what people can do and be given both their capacities, and environmental opportunities and constraints. Economist Amartya Sen’s focus on freedoms and agency resonates with psychological calls for empowerment, and philosopher Martha Nussbaum’s specification of requirements for a life that is fully human provides an important guide for social programs. Community psychology’s focus on mediating structures has much to offer the capabilities approach. Parallels between capabilities, as enumerated by Nussbaum, and settings that foster positive youth development, as described in a National Research Council Report (Eccles and Gootman (Eds) in Community programs to promote youth development. National Academy Press, Washington, 2002) suggest extensions of the approach to children. Community psychologists can contribute to theory about ways to create and modify settings to enhance capabilities as well as empowerment and positive youth development. Finally, capabilities are difficult to measure, because they involve freedoms to choose but only choices actually made or enacted can be observed. The variation in activities or goals across members of a setting provides a measure of the capabilities that the setting fosters. PMID:25822113

  13. SOME BLIND FRESH EQUALIZATION ALGORITHMS WITH ANTI-INTERFERENCE CAPABILITIES

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Some novel blind FREquency.Shift (FRESH) equalizer algorithms axe proposed for the equalization of Finite Impulse Response(FIR)single channel with anti-interference capabilities.These algorithms based on FRESH filter can work well without any training sequence.Simulation results show that the equalizer algorithms can effectively reject many types of interferences and the performances of these new equalizer algorithms are superior to the conventional equalizer algorithms.

  14. Effectiveness of Non-Lethal Capabilities in a Maritime Environment

    Science.gov (United States)

    2006-09-01

    Intended Movement ROE Rules of Engagement ROMO Range of Military Operations WM Warning Munitions XML eXtensible Markup Language xvi...encompasses the concepts of the current National Security Strategy. The range of military operations ( ROMO ), as shown in Figure 1, describes military...degraded due to inclement weather conditions, such as high winds , the AHD is not as effective as a first response capability. Figure 25

  15. A Systems Engineering Capability Maturity Model, Version 1.1,

    Science.gov (United States)

    1995-11-01

    Ongoing Skills and Knowledge 4-113 PA 18: Coordinate with Suppliers 4-120 Part 3: Appendices Appendix A Appendix B Appendix C Appendix D...Ward-Callan, C. Wasson, A. Wilbur, A.M. Wilhite, R. Williams, H. Wilson, D. Zaugg, and C. Zumba . continued on next page SM CMM and Capability...Model (SE-CMM) was developed as a response to industry requests for assistance in coordinating and publishing a model that would foster improvement

  16. An International Comparison of Absolute Radiant Power Measurement Capabilities

    OpenAIRE

    Thomas, Douglas B.

    1990-01-01

    We report the results of an intercomparison of monochromatic radiant power measurement capabilities recently completed by 11 national laboratories. The intercomparison radiometers, distributed in pairs, included an amplifier with six decades of precision gain and one of two types of silicon photodiode (pn or np-type construction). Eleven of the laboratories measured the absolute responsivity of the radiometers at 633 nm and nine at 488 nm. The standard deviation of the overall difference was ...

  17. A Capability Approach for the European Union

    OpenAIRE

    Eiffe, Franz F.

    2008-01-01

    The aim of this paper is to develop a new concept for the EU in order to define and measure poverty no longer on the basis of income1, but on so called capabilities to argue for a capability oriented social policy. The capability approach (CA) was originally developed by Nobel laureate Amartya Sen2 and can be interpreted as critique of the utilitarian tradition of standard economics. In Sen's view, mainstream economic analysis operates on a very narrow base and does not include central inform...

  18. Photovoltaic Systems Test Facilities: Existing capabilities compilation

    Science.gov (United States)

    Volkmer, K.

    1982-01-01

    A general description of photovoltaic systems test facilities (PV-STFs) operated under the U.S. Department of Energy's photovoltaics program is given. Descriptions of a number of privately operated facilities having test capabilities appropriate to photovoltaic hardware development are given. A summary of specific, representative test capabilities at the system and subsystem level is presented for each listed facility. The range of system and subsystem test capabilities available to serve the needs of both the photovoltaics program and the private sector photovoltaics industry is given.

  19. Classifying organisational capabilities by their nature and role for technological capability

    NARCIS (Netherlands)

    Rousseva, R.

    2009-01-01

    Based on critical literature review this research highlights a number of gaps in the existing treatment of technological and organisational capabilities. It has been recognised that organisational capabilities have an important role to play in development of technological capabilities both in lateco

  20. The Impact of IT Capability on Employee Capability, Customer Value, Customer Satisfaction, and Business Performance

    Science.gov (United States)

    Chae, Ho-Chang

    2009-01-01

    This study empirically examines the impact of IT capability on firms' performance and evaluates whether firms' IT capabilities play a role in improving employee capability, customer value, customer satisfaction, and ultimately business performance. The results were based on comparing the business performance of the IT leader companies with that of…

  1. The Impact of IT Capability on Employee Capability, Customer Value, Customer Satisfaction, and Business Performance

    Science.gov (United States)

    Chae, Ho-Chang

    2009-01-01

    This study empirically examines the impact of IT capability on firms' performance and evaluates whether firms' IT capabilities play a role in improving employee capability, customer value, customer satisfaction, and ultimately business performance. The results were based on comparing the business performance of the IT leader companies with that of…

  2. The Capabilities of the Offshore Middlemen

    DEFF Research Database (Denmark)

    Mahnke, Volker; Wareham, Jonathan

    preliminary theoretical justification for the emergence of offshore intermediaries; describe how and why they develop intermediation capabilities; and offer initial evidence substantiating their function and processes in intermediating transnational offshoring relationships in software development...

  3. Establishment of a corner turning test capability

    Energy Technology Data Exchange (ETDEWEB)

    Ashcraft, R.W.; West, G.T.

    1978-11-01

    A corner turning test capability has been established. While the test is not suited to be the sole criterion for lot qualification, it provides valuable information regarding explosive behavior near failure. Light enhancement and film record analysis techniques are discussed.

  4. Identity Building in Organisations: Proactive Capability Development

    DEFF Research Database (Denmark)

    Rasmussen, Lauge Baungaard

    2002-01-01

    Identity building in organisations is often viewed as legitimacy of value systems of the organisation. Based on empirical studies the task of this article is to argue that such a legitimacy approach risks failing in the longer perspective, if the proactive capability development is neglected....... The participatory scenario method presented in this article is one of the possible methods to enhance identity building based on proactive capability development....

  5. Nuclear Data Needs and Capabilities for Applications

    CERN Document Server

    Bernstein, Lee; Hurst, Aaron; Kelly, John; Kondev, Filip; McCutchan, Elizabeth; Nesaraja, Caroline; Slaybaugh, Rachel; Sonzogni, Alejandro

    2015-01-01

    The Workshop on Nuclear Data Needs and Capabilities for Applications (NDNCA) was held at Lawrence Berkeley National Laboratory (LBNL) on 27-29 May 2015. The goals of NDNCA were compile nuclear data needs across a wide spectrum of applied nuclear science, and to provide a summary of associated capabilities (accelerators, reactors, spectrometers, etc.) available for required measurements. This document represents the results of the workshop and a compilation of other recent documents assessing nuclear data needs for the above-mentioned applications.

  6. Aging and DNA repair capability. [Review

    Energy Technology Data Exchange (ETDEWEB)

    Tice, R R

    1977-01-01

    A review of the literature on DNA repair processes in relation to aging is presented under the following headings: DNA repair processes; age-related occurrence of unrepaired DNA lesions; DNA repair capability as a function of age; tissue-specific DNA repair capability; acceleration of the aging process by exposure to DNA damaging agents; human genetic syndromes; and longevity and DNA repair processes. (HLW)

  7. Expanding Lookout Capabilities for Architectural Analysis

    Science.gov (United States)

    Shick, B.

    SMC/SYSW/ENY's Lookout tool provides a M&S capability for architectural analysis. It models the contributions of ground and space-based assets in several mission threads and scenarios to quantify overall Space Situational Awareness (SSA) capability. Plotting performance results versus costs enables decision makers to identify and evaluate Best Value families of systems and combinations of architectures. Currently, SMC intends to use Lookout to impact the Fiscal Year 2012 budget programming cycle, the National SSA Initial Capabilities Document (ICD) and Architecture definition effort, planning for programs of record, and AFSPC & SMC leadership. Ultimately, Lookout will enable additional space superiority analysis. Previous Lookout work focused on modeling the metric tracking capabilities of the Space Surveillance Network (detecting and tracking) and proposed concepts to close identified collection shortfalls. SMC/SYSW/ENY leveraged some of the lessons learned in developing and implementing the metric tracking models to expand Lookout to develop an initial characterization capability, including non-resolved space object identification (SOI), imaging, and Foreign Instrumentation and Signals (FIS) Intelligence. Characterization collection phenomenologies added in FY08 and FY09 include mechanical tracking and phased array radars, visible telescopes, and signals collection. Lookout enables evaluating the characterization collections for quantity, quality, and timeliness. Capturing the Tasking, Collection, Processing, Exploitation, and Dissemination processes represent one of the biggest challenges in including characterization capabilities in mission thread and scenario-based analysis. The SMC/SYSW/ENY team met with several representatives of the community and held community-wide Technical Interchange Meetings. Based on feedback from these meetings, SMC created an infrastructure for modeling the tasking processes and scales to relate collection quality to intelligence

  8. Creativity takes courage (and digital capabilities)

    OpenAIRE

    Pinny, Kerry; Elliott, Marcus

    2016-01-01

    Our session will detail the work undertaken at the University of Lincoln (Educational Development and Enhancement Unit, 2016; Pinny, 2015; Elliott, 2016) to support staff to develop their digital capabilities. We will detail our journey from the adoption of the Jisc framework and development of an institutional digital capabilities strategy, to gaining senior management buy in, piloting of the Jisc Discovery Tool (2016) and support resources, including a Lynda.com pilot. This session will ...

  9. Essential Medical Capabilities and Medical Readiness

    Science.gov (United States)

    2016-07-01

    15-001098 Copy Essential Medical Capabilities and Medical Readiness John E. Whitley Joseph F. Adams Joseph J. Angello Jennifer T. Brooks Sarah K...other national challenges. Essential Medical Capabilities and Medical Readiness John E. Whitley Joseph F. Adams Joseph J. Angello Jennifer T. Brooks...noted that the ability of the Military Health System to provide operational healthcare is measured by the readiness of its medical personnel and

  10. Descriptors of server capabilities in China

    DEFF Research Database (Denmark)

    Adeyemi, Oluseyi; Slepniov, Dmitrij; Wæhrens, Brian Vejrum

    2013-01-01

    China with the huge market potential it possesses is an important issue for subsidiaries of western multinational companies. The objective of this paper is therefore to strengthen researchers’ and practitioners’ perspectives on what are the descriptors of server capabilities. The descriptors...... are relevant to determine subsidiary roles and as an indication of the capabilities required. These descriptors are identified through extensive literature review and validated by case studies of two Danish multinational companies subsidiaries operating in China. They provided the empirical basis...

  11. Competing on capabilities: the new rules of corporate strategy.

    Science.gov (United States)

    Stalk, G; Evans, P; Shulman, L E

    1992-01-01

    In the 1980s, companies discovered time as a new source of competitive advantage. In the 1990s, they will discover that time is only one piece of a more far-reaching transformation in the logic of competition. Using examples from Wal-Mart and other highly successful companies, Stalk, Evans, and Shulman of the Boston Consulting Group provide managers with a guide to the new world of "capabilities-based competition." In today's dynamic business environment, strategy too must become dynamic. Competition is a "war of movement" in which success depends on anticipation of market trends and quick response to changing customer needs. In such an environment, the essence of strategy is not the structure of a company's products and markets but the dynamics of its behavior. To succeed, a company must weave its key business processes into hard-to-imitate strategic capabilities that distinguish it from its competitors in the eyes of customers. A capability is a set of business processes strategically understood--for example, Wal-Mart's expertise in inventory replenishment, Honda's skill at dealer management, or Banc One's ability to "out-local the national banks and out-national the local banks." Such capabilities are collective and cross-functional--a small part of many people's jobs, not a large part of a few. Finally, competing on capabilities requires strategic investments in support systems that span traditional SBUs and functions and go far beyond what traditional cost-benefit metrics can justify. A CEO's success in building and managing a company's capabilities will be the chief test of management skill in the 1990s. The prize: companies that combine scale and flexibility to outperform the competition.

  12. İşyeri Nezaketsizliğinin Sosyal Kaytarma Davranışı ve İşten Ayrılma Niyeti Üzerindeki Etkisinde Duygusal Tükenmenin Aracılık Rolü

    OpenAIRE

    Kanten, Pelin

    2016-01-01

    Bu çalışmada, işyeri nezaketsizliğinin sosyal kaytarma davranışı ve işten ayrılma niyeti üzerindeki etkisinde duygusal tükenmenin aracılık rolünün incelenmesi amaçlanmıştır. Literatürdeki çalışmalarda işgörenler tarafından algılanan işyeri nezaketsizliğinin bireysel ve örgütsel açıdan birçok olumsuz sonucu olduğu ileri sürülmektedir. Bu doğrultuda çalışmada işyeri nezaketsizliğinin olumsuz çıktıları kapsamında değerlendirilen sosyal kaytarma davranışı, duygusal tükenme ve işten ayrılma niyeti...

  13. ROMANIAN YOUNG LEADERS CAPABILITIES: AN EMPIRICAL SURVEY

    Directory of Open Access Journals (Sweden)

    ANGELA-OLIMPIA LOBONEA OLTEAN

    2016-06-01

    Full Text Available This paper aims to disseminate the results of a study focused on young leaders, designed to fill the gap in the specialty literature about the capabilities of young leaders in Romania. Capabilities - in our opinion, represents the leader's potentialities, the engine of transformation. They exist in a latent state and by activation they generate economic effects. Through this study we want to identify young Romanian people's attitudes towards capabilities; when we say capabilities, we understand potential. In this article we will present the capabilities from the perspective of potential. Sure, there are also other classifications, but from an economical perspective we consider that the potential of a leader is relevant through the following components: emotional potential, social potential, cognitive potential, managerial potential and behavioral potential. The overall conclusion is that in the realized study we have identified the following key capabilities of young Romanian leaders: character, confidence, empathy, credibility, leadership style, vision, memory, ability to be proactive, optimism, ability to generate respect.

  14. The New MCNP6 Depletion Capability

    Energy Technology Data Exchange (ETDEWEB)

    Fensin, Michael Lorne [Los Alamos National Laboratory; James, Michael R. [Los Alamos National Laboratory; Hendricks, John S. [Los Alamos National Laboratory; Goorley, John T. [Los Alamos National Laboratory

    2012-06-19

    The first MCNP based inline Monte Carlo depletion capability was officially released from the Radiation Safety Information and Computational Center as MCNPX 2.6.0. Both the MCNP5 and MCNPX codes have historically provided a successful combinatorial geometry based, continuous energy, Monte Carlo radiation transport solution for advanced reactor modeling and simulation. However, due to separate development pathways, useful simulation capabilities were dispersed between both codes and not unified in a single technology. MCNP6, the next evolution in the MCNP suite of codes, now combines the capability of both simulation tools, as well as providing new advanced technology, in a single radiation transport code. We describe here the new capabilities of the MCNP6 depletion code dating from the official RSICC release MCNPX 2.6.0, reported previously, to the now current state of MCNP6. NEA/OECD benchmark results are also reported. The MCNP6 depletion capability enhancements beyond MCNPX 2.6.0 reported here include: (1) new performance enhancing parallel architecture that implements both shared and distributed memory constructs; (2) enhanced memory management that maximizes calculation fidelity; and (3) improved burnup physics for better nuclide prediction. MCNP6 depletion enables complete, relatively easy-to-use depletion calculations in a single Monte Carlo code. The enhancements described here help provide a powerful capability as well as dictate a path forward for future development to improve the usefulness of the technology.

  15. Open architecture for rapid deployment of capability

    Science.gov (United States)

    Glassman, Jacob

    2016-05-01

    Modern warfare has drastically changed from conventional to non-conventional and from fixed threats to dynamic ones over the past several decades. This unprecedented fundamental shift has now made our adversaries and their weapons more nebulous and ever changing. Our current acquisition system however is not suited to develop, test and deploy essential capability to counter these dynamic threats in time to combat them. This environment requires a new infrastructure in our system design to rapidly adopt capabilities that we do not currently plan for or even know about. The key to enabling this rapid implementation is Open Architecture in acquisition. The DoD has shown it can rapidly prototype capabilities such as unmanned vehicles but has severely struggled in moving from the prototyping to deployment. A major driver of this disconnect is the lack of established infrastructure to employ said capability such as launch and recovery systems and command and control. If we are to be successful in transitioning our rapid capability to the warfighter we must implement established well defined interfaces and enabling technologies to facilitate the rapid adoption of capability so the warfighter has the tools to effectively counter the threat.

  16. HEALTH, VITAL GOALS, AND CENTRAL HUMAN CAPABILITIES

    Science.gov (United States)

    Venkatapuram, Sridhar

    2013-01-01

    I argue for a conception of health as a person's ability to achieve or exercise a cluster of basic human activities. These basic activities are in turn specified through free-standing ethical reasoning about what constitutes a minimal conception of a human life with equal human dignity in the modern world. I arrive at this conception of health by closely following and modifying Lennart Nordenfelt's theory of health which presents health as the ability to achieve vital goals. Despite its strengths I transform Nordenfelt's argument in order to overcome three significant drawbacks. Nordenfelt makes vital goals relative to each community or context and significantly reflective of personal preferences. By doing so, Nordenfelt's conception of health faces problems with both socially relative concepts of health and subjectively defined wellbeing. Moreover, Nordenfelt does not ever explicitly specify a set of vital goals. The theory of health advanced here replaces Nordenfelt's (seemingly) empty set of preferences and society-relative vital goals with a human species-wide conception of basic vital goals, or ‘central human capabilities and functionings’. These central human capabilities come out of the capabilities approach (CA) now familiar in political philosophy and economics, and particularly reflect the work of Martha Nussbaum. As a result, the health of an individual should be understood as the ability to achieve a basic cluster of beings and doings—or having the overarching capability, a meta-capability, to achieve a set of central or vital inter-related capabilities and functionings. PMID:22420910

  17. Health, vital goals, and central human capabilities.

    Science.gov (United States)

    Venkatapuram, Sridhar

    2013-06-01

    I argue for a conception of health as a person's ability to achieve or exercise a cluster of basic human activities. These basic activities are in turn specified through free-standing ethical reasoning about what constitutes a minimal conception of a human life with equal human dignity in the modern world. I arrive at this conception of health by closely following and modifying Lennart Nordenfelt's theory of health which presents health as the ability to achieve vital goals. Despite its strengths I transform Nordenfelt's argument in order to overcome three significant drawbacks. Nordenfelt makes vital goals relative to each community or context and significantly reflective of personal preferences. By doing so, Nordenfelt's conception of health faces problems with both socially relative concepts of health and subjectively defined wellbeing. Moreover, Nordenfelt does not ever explicitly specify a set of vital goals. The theory of health advanced here replaces Nordenfelt's (seemingly) empty set of preferences and society-relative vital goals with a human species-wide conception of basic vital goals, or 'central human capabilities and functionings'. These central human capabilities come out of the capabilities approach (CA) now familiar in political philosophy and economics, and particularly reflect the work of Martha Nussbaum. As a result, the health of an individual should be understood as the ability to achieve a basic cluster of beings and doings-or having the overarching capability, a meta-capability, to achieve a set of central or vital inter-related capabilities and functionings.

  18. Exploration Medical Capability (ExMC) Projects

    Science.gov (United States)

    Wu, Jimmy; Watkins, Sharmila; Baumann, David

    2010-01-01

    During missions to the Moon or Mars, the crew will need medical capabilities to diagnose and treat disease as well as for maintaining their health. The Exploration Medical Capability Element develops medical technologies, medical informatics, and clinical capabilities for different levels of care during space missions. The work done by team members in this Element is leading edge technology, procedure, and pharmacological development. They develop data systems that protect patient's private medical information, aid in the diagnosis of medical conditions, and act as a repository of relevant NASA life sciences experimental studies. To minimize the medical risks to crew health the physicians and scientists in this Element develop models to quantify the probability of medical events occurring during a mission. They define procedures to treat an ill or injured crew member who does not have access to an emergency room and who must be cared for in a microgravity environment where both liquids and solids behave differently than on Earth. To support the development of these medical capabilities, the Element manages the development of medical technologies that prevent, monitor, diagnose, and treat an ill or injured crewmember. The Exploration Medical Capability Element collaborates with the National Space Biomedical Research Institute (NSBRI), the Department of Defense, other Government-funded agencies, academic institutions, and industry.

  19. Machine Process Capability Information Through Six Sigma

    Energy Technology Data Exchange (ETDEWEB)

    Lackner, M.F.

    1998-03-13

    A project investigating details concerning machine process capability information and its accessibility has been conducted. The thesis of the project proposed designing a part (denoted as a machine capability workpiece) based on the major machining features of a given machine. Parts are machined and measured to gather representative production, short-term variation. The information is utilized to predict the expected defect rate, expressed in terms of a composite sigma level process capability index, for a production part. Presently, decisions concerning process planning, particularly what machine will statistically produce the minimum amount of defects based on machined features and associated tolerances, are rarely made. Six sigma tools and methodology were employed to conduct this investigation at AlliedSignal FM and T. Tools such as the thought process map, factor relationship diagrams, and components of variance were used. This study is progressing toward completion. This research study was an example of how machine process capability information may be gathered for milling planar faces (horizontal) and slot features. The planning method used to determine where and how to gather variation for the part to be designed is known as factor relationship diagramming. Components-of-variation is then applied to the gathered data to arrive at the contributing level of variation illustrated within the factor relationship diagram. The idea of using this capability information beyond process planning to the other business enterprise operations is proposed.

  20. On Capability Approach, Poverty and Corruption

    Directory of Open Access Journals (Sweden)

    Daojiu Hu

    2014-04-01

    Full Text Available The core of development is to face up with the challenge of the issue of poverty, which directly is associated with the ultimate goal of social, political and economic development. If the poverty has not been properly handled, development will be inefficient and unsustainable. This paper briefly indicates the main idea of Amartya Sen’s capability approach, then utilizing the approach to analyze poverty and the bottleneck in dealing such issues. It illustrates the inter-relationship of capability, poverty and corruption, and demonstrates that corruption is both the cause and the consequence of poverty and the failure of capability. When there corruption comes, the essential power to alleviate and eliminate poverty such as political accountability, transparency, engagement and openness are all spoiled and even wiped off. Political accountability, transparence, engagement are of great importance to both anti-corruption and poverty and promotion of capability. Economic aid for the poor and needy should be reinforced by fostering and promoting the capability of the poor and needy, so that the purpose of eliminating poverty and corruption could be achieved.

  1. Rotordynamics on the PC: Further Capabilities of ARDS

    Science.gov (United States)

    Fleming, David P.

    1997-01-01

    Rotordynamics codes for personal computers are now becoming available. One of the most capable codes is Analysis of RotorDynamic Systems (ARDS) which uses the component mode synthesis method to analyze a system of up to 5 rotating shafts. ARDS was originally written for a mainframe computer but has been successfully ported to a PC; its basic capabilities for steady-state and transient analysis were reported in an earlier paper. Additional functions have now been added to the PC version of ARDS. These functions include: 1) Estimation of the peak response following blade loss without resorting to a full transient analysis; 2) Calculation of response sensitivity to input parameters; 3) Formulation of optimum rotor and damper designs to place critical speeds in desirable ranges or minimize bearing loads; 4) Production of Poincard plots so the presence of chaotic motion can be ascertained. ARDS produces printed and plotted output. The executable code uses the full array sizes of the mainframe version and fits on a high density floppy disc. Examples of all program capabilities are presented and discussed.

  2. Analysis and evaluation of enterprise risk management capability elements

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Research on enterprise risk management capability is conducted with a view of discerning and processing risks, in which an evaluation index system and an evaluation model of enterprise risk management capabilities are constructed. The risk management capability consists of four aspects, i.e. risk identification capability, risk assessment capability, risk planning capability and risk control capability. Risk identification and assessment capabilities reflect the level of enterprises on finding and analyzing...

  3. Integration of resilience capabilities for Critical Infrastructures into the Emergency Management set-up

    DEFF Research Database (Denmark)

    Kozine, Igor; Andersen, Henning Boje

    2015-01-01

    We suggest an approach for maintaining and enhancing resilience that integrates the resilience capabilities of Critical Infrastructures (CIs) into the emergency management cycle (prevention, preparedness, response, and recovery). This allows emergency services to explicitly address resilience...

  4. Cosmopolitan capabilities in the HE classroom

    Directory of Open Access Journals (Sweden)

    Veronica Crosbie

    2014-04-01

    Full Text Available This study, concerning the development of cosmopolitan citizenship, draws on theories of human development and capabilities (Sen 1999; Nussbaum 2000 from a social justice perspective, where individual wellbeing is articulated as having the freedom to live a life of one’s choosing. In the context of an English to Speakers of Other Languages (ESOL classroom this involves paying attention to pedagogical strategies, power dynamics and curriculum content as a means of developing valued beings and doings (or capabilities and functionings as they are described in the literature. Sample activities are presented and evaluated to see to what extent they achieve the desired end. These include critical pedagogical interventions, students’ artefacts and extracts from focus group interviews, class reports and reflective journals.  Results from the textual data offer research evidence of successful curriculum change, demonstrating that the learning that takes place there can make a difference: in terms of the learners’ identity development, capability enhancement and cosmopolitan citizenship.

  5. Capabilitarian Sufficiency: Capabilities and Social Justice

    DEFF Research Database (Denmark)

    Nielsen, Lasse; Axelsen, David Vestergaard

    2016-01-01

    This paper suggests an account of sufficientarianism—i.e. that justice is fulfilled when everyone has enough—laid out within a general framework of the capability approach. In doing so, it seeks to show that sufficiency is especially plausible as an ideal of social justice when constructed around...... key capabilitarian insights such as freedom, pluralism, and attention to empirical interconnections between central capabilities. Correspondingly, we elaborate on how a framework for evaluating social justice would look when constructed in this way and give reasons for why capabilitarians should...... of a social being. In each category, we argue, achieving sufficiency requires different distributional patterns depending on how the capabilities themselves work and interrelate. This argument adds a new dimension to the way capabilitarians think about social justice and changes how we should target instances...

  6. Grid sensitivity capability for large scale structures

    Science.gov (United States)

    Nagendra, Gopal K.; Wallerstein, David V.

    1989-01-01

    The considerations and the resultant approach used to implement design sensitivity capability for grids into a large scale, general purpose finite element system (MSC/NASTRAN) are presented. The design variables are grid perturbations with a rather general linking capability. Moreover, shape and sizing variables may be linked together. The design is general enough to facilitate geometric modeling techniques for generating design variable linking schemes in an easy and straightforward manner. Test cases have been run and validated by comparison with the overall finite difference method. The linking of a design sensitivity capability for shape variables in MSC/NASTRAN with an optimizer would give designers a powerful, automated tool to carry out practical optimization design of real life, complicated structures.

  7. ANTECEDENTS OF CUSTOMER RELATIONSHIP MANAGEMENT CAPABILITIES

    Directory of Open Access Journals (Sweden)

    Tuleu Daniela

    2015-07-01

    Full Text Available Customer relationship management, as a process to manage customer relationship initiation, maintenance and termination to maximize the value of the relationship portfolio, is an evolving process. In recent years, the development of interactive technologies (social media have revolutionized the interaction between firms and their customers and between customers. The impact of technology on CRM is improving ways of collecting and processing customer information and transforming communication with customers. In the context of the development of social networks, the introduction of social media applications in customer relationship management activities bring important changes in this area. Thus, managers need to pay attention to the interaction management as an important process of CRM and enhance the customer relationship management capabilities. The study propose a conceptual research model of several antecedents of customer relationship managements capabilities and provide the linkage between this antecedents and CRM capabilities. First, following review of existing research literature related to customer relationship management, there are some conceptual clarification on customer relationship management. Second, are presented the working concepts: the adoption of interactive technologies, customer concept, customer empowerment, customer relationship orientation and customer-centric management system. Then, it is proposed the conceptual model and finally are presented conclusions, managerial implications, limitations and research directions. From a theoretical perspective, this paper highlights the importance of marketing actions at the individual customer level and reveal the impact of adoption by companies of interactive technologies so that organizations have the opportunity to engage in conversations with customers and respond in real time the requirements that they launched the online environment. Nowadays, customers feel empowered and play

  8. Improving Social Security's Financial Capability Assessments.

    Science.gov (United States)

    Appelbaum, Paul S; Birkenmaier, Julie; Norman, Marc

    2016-07-01

    When Social Security beneficiaries are incapable of managing their benefits, the agency can appoint a representative payee to administer benefits on their behalf. A committee of the Institute of Medicine was asked by the Social Security Administration to review the process by which financial capability determinations are made and to recommend improvements. The committee's conclusions and recommendations include the following: giving priority to real-world financial performance in assessing capability, providing clearer instructions to informants, developing systematic approaches to identifying beneficiaries at risk of incapability, exploring the use of a supervised direct payment option, and instituting regular data collection to assist in improving operations.

  9. Trends in Microfabrication Capabilities & Device Architectures.

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, Todd [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jones, Adam [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Lentine, Tony [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Mudrick, John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Okandan, Murat [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Rodrigues, Arun [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-06-01

    The last two decades have seen an explosion in worldwide R&D, enabling fundamentally new capabilities while at the same time changing the international technology landscape. The advent of technologies for continued miniaturization and electronics feature size reduction, and for architectural innovations, will have many technical, economic, and national security implications. It is important to anticipate possible microelectronics development directions and their implications on US national interests. This report forecasts and assesses trends and directions for several potentially disruptive microfabrication capabilities and device architectures that may emerge in the next 5-10 years.

  10. Trends in Microfabrication Capabilities & Device Architectures.

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, Todd [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jones, Adam [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Lentine, Anthony L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Mudrick, John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Okandan, Murat [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Rodrigues, Arun F. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-06-01

    The last two decades have seen an explosion in worldwide R&D, enabling fundamentally new capabilities while at the same time changing the international technology landscape. The advent of technologies for continued miniaturization and electronics feature size reduction, and for architectural innovations, will have many technical, economic, and national security implications. It is important to anticipate possible microelectronics development directions and their implications on US national interests. This report forecasts and assesses trends and directions for several potentially disruptive microfabrication capabilities and device architectures that may emerge in the next 5-10 years.

  11. Pretreatment Capabilities and Benefits of Electrocoagulation

    Science.gov (United States)

    2004-12-01

    PRETREATMENT CAPABILITIES AND BENEFITS OF ELECTROCOAGULATION Michael Mickley Mickley & Associates Boulder, Colorado...DATES COVERED - 4. TITLE AND SUBTITLE Pretreatment Capabilities and Benefits of Electrocoagulation 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c...4 2.1 Background for Electrocoagulation Technology ………………………. 4 2.1.1 Applications ……………………………………………………. 4 2.1.2

  12. Cloud-based Architecture Capabilities Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    Vang, Leng [Idaho National Lab. (INL), Idaho Falls, ID (United States); Prescott, Steven R [Idaho National Lab. (INL), Idaho Falls, ID (United States); Smith, Curtis [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-09-01

    In collaborating scientific research arena it is important to have an environment where analysts have access to a shared of information documents, software tools and be able to accurately maintain and track historical changes in models. A new cloud-based environment would be accessible remotely from anywhere regardless of computing platforms given that the platform has available of Internet access and proper browser capabilities. Information stored at this environment would be restricted based on user assigned credentials. This report reviews development of a Cloud-based Architecture Capabilities (CAC) as a web portal for PRA tools.

  13. Improved DFIG Capability during Asymmetrical Grid Faults

    DEFF Research Database (Denmark)

    Zhou, Dao; Blaabjerg, Frede

    2015-01-01

    , the capability of a 2 MW DFIG to ride through asymmetrical grid faults can be estimated at the existing design of the power electronics converter. Finally, a control scheme aimed to improve the DFIG capability is proposed and the simulation results validate its feasibility.......In the wind power application, different asymmetrical types of the grid fault can be categorized after the Y/d transformer, and the positive and negative components of a single-phase fault, phase-to-phase fault, and two-phase fault can be summarized. Due to the newly introduced negative and even...

  14. NASA ATP Force Measurement Technology Capability Strategic Plan

    Science.gov (United States)

    Rhew, Ray D.

    2008-01-01

    The Aeronautics Test Program (ATP) within the National Aeronautics and Space Administration (NASA) Aeronautics Research Mission Directorate (ARMD) initiated a strategic planning effort to re-vitalize the force measurement capability within NASA. The team responsible for developing the plan included members from three NASA Centers (Langley, Ames and Glenn) as well as members from the Air Force s Arnold Engineering and Development Center (AEDC). After visiting and discussing force measurement needs and current capabilities at each participating facility as well as selected force measurement companies, a strategic plan was developed to guide future NASA investments. This paper will provide the details of the strategic plan and include asset management, organization and technology research and development investment priorities as well as efforts to date.

  15. Current capability of a matured disposable acoustic sensor network

    Science.gov (United States)

    Beale, D. A. R.; Geddes, N. J., II; Hume, A.; Gray, A. J.

    2006-05-01

    In response to the needs of the UK MOD QinetiQ have designed, developed and trialled an ad-hoc, self organising network of acoustic nodes for in-depth deployment that can detect and track military targets in a range of environments and for all types of weapon locating. Research conducted has shown that disposable technologies are sufficiently mature to provide a useful military capability. Work this year has included a 3 month series of trials to exercise the prototype equipment and has provided an indication of in-service capability across a broad range of environments. This paper will discuss the scientific approach that was applied to the development of the equipment, from early laboratory development through to the prototype sensor network deployment in operationally representative environments. Highlights from the trials have been provided. New findings from the fusion of a low cost thermal imager that can be cued by the acoustic network are also discussed.

  16. From Patchwork to Package: Implementing Foundational Capabilities for State and Local Health Departments

    Science.gov (United States)

    Castrucci, Brian C.; Dilley, Abby; Leider, Jonathon P.; Juliano, Chrissie; Nelson, Rachel; Kaiman, Sherry; Sprague, James B.

    2015-01-01

    Daily public health responses are threatened by the inadequate capacity of public health agencies. A 2012 Institute of Medicine report defined a package of foundational capabilities that support all programs and services within a health department. Standardizing foundational capabilities may help address the increasing disparity in health department performance nationally. During the Fall of 2013, we collected information on how much state and local health departments knew about foundational capabilities. To our knowledge, this was the first study to assess current health department infrastructure as it relates to foundational capabilities. PMID:25521887

  17. The (Proper) Microfoundations of Routines and Capabilities

    DEFF Research Database (Denmark)

    Felin, Teppo; Foss, Nicolai Juul

    2012-01-01

    Sidney Winter (2011), Brian Pentland (2011), and Geoffrey Hodgson and Thorbjørn Knudsen (2011) take issue with the arguments in Teppo Felin and Nicolai J. Foss (2011), along with more generally critiquing the ‘microfoundations project’ related to routines and capabilities. In this rejoinder we...

  18. Unifying Capability Integration Analysis - Initial Insights

    Science.gov (United States)

    2011-09-01

    requiring different protocols for information passing and handling. This was caused by the rather compressed timeframe available to do this post-processing...included, denoted by , Cij’, is defined as Nd A Cij’ = Cij (1-(Did Ckd ...dependency on the capability associated with Deficiency d and Ckd was the closure of Deficiency d provided the selection of one its alternatives, specifically

  19. Happiness and capability : introduction to the symposium

    NARCIS (Netherlands)

    Hoorn, A.A.J. van; Riad el Mabsout, R.; Sent, E.-M.

    2010-01-01

    The aim of this symposium is to move beyond the established, narrow measures of well-being. It does so by bringing together insights from the happiness approach and the capability approach, both of which are at the forefront of theorizing on welfare in economics. The reason is that the connection ha

  20. Methodology for Conducting Analyses of Army Capabilities

    Science.gov (United States)

    1992-06-01

    Agency Under the Jurisdiction of the Deputy Chief of Staff for Personnel EDGAR M. JOHNSON MICHAEL D. SHALER Technical Director COL, AR Commanding...10 of O&O plan below). 65 Table 2. Outline of O&0 Plan Orinal Section Proposed Chanae 1. Title No Change 2. Need Refer to Functional Capability Plans

  1. Human Capital, (Human) Capabilities and Higher Education

    Science.gov (United States)

    Le Grange, L.

    2011-01-01

    In this article I initiate a debate into the (de)merits of human capital theory and human capability theory and discuss implications of the debate for higher education. Human capital theory holds that economic growth depends on investment in education and that economic growth is the basis for improving the quality of human life. Human capable…

  2. Capabilities and Equality of Health II

    DEFF Research Database (Denmark)

    Keiding, Hans

    The concept of capabilities, introduced originally by Sen, has inspired many researchers but has not found any simple formal representation which might be instrumental in the construction of a comprehensive theory of equality. In a previous paper (Keiding, 2005), we investigated whether preferences...

  3. Fuel Fabrication Capability Research and Development Plan

    Energy Technology Data Exchange (ETDEWEB)

    Senor, David J.; Burkes, Douglas

    2013-06-28

    The purpose of this document is to provide a comprehensive review of the mission of the Fuel Fabrication Capability (FFC) within the Global Threat Reduction Initiative (GTRI) Convert Program, along with research and development (R&D) needs that have been identified as necessary to ensuring mission success. The design and fabrication of successful nuclear fuels must be closely linked endeavors.

  4. Negative Capability? Measuring the Unmeasurable in Education

    Science.gov (United States)

    Unterhalter, Elaine

    2017-01-01

    This introductory article to the special issue of "Comparative Education" on measuring the unmeasurable in education considers measurement as reflecting facts and uncertainties. The notion of negative capability is used metaphorically to depict some limits of what is measurable, and portray aspects of the process of education, associated…

  5. Organizational Strategic Learning Capability: Exploring the Dimensions

    Science.gov (United States)

    Moon, Hanna; Sejong, Wendy; Valentine, Tom

    2017-01-01

    Purpose: How to build and enhance the strategic learning capability (SLC) of an organization becomes crucial to both research and practice. This study was designed with the purpose to conceptualize SLC by translating and interpreting the related literature to develop empirical dimensions that could be tested and used in a survey instrument.…

  6. COMPLEMENTARITY OF INFORMATION TECHNOLOGY AND MARKETING CAPABILITIES

    Directory of Open Access Journals (Sweden)

    RAUL ALEXANDRU HUȚU

    2015-04-01

    Full Text Available This paper study the relation between information technology and marketing capabilities. The interface between marketing and information technology forms the subject of numerous empirical and conceptual research. The expanding adoption of information technology in marketing implies the knowledge about the e-marketing capabilities development factors and the potential of these capabilities to generate competitive advantage and to improve firm’s performance. The results of recent studies highlight that organizations witch integrate information technology in marketing processes can improve results in customer acquisition and retention processes, also provides other benefits like share growth and cost reduction and it also improve the firms marketing functions. The aim of this exploratory research is to identify the antecedents of e-marketing and technological capabilities of the firm. Understanding this link is arguably one of the key challenges facing organizations in today’s highly dynamic environment.. It is also critical for marketing managers not only for determining strategic investments of resources but also for demonstrating marketing return on activities. E-marketing not only has a tremendous potential for growth but also poses unique challenges for all organisations, incumbents or new entrants.

  7. Plutonium Oxide Process Capability Work Plan

    Energy Technology Data Exchange (ETDEWEB)

    Meier, David E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Tingey, Joel M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2014-02-28

    Pacific Northwest National Laboratory (PNNL) has been tasked to develop a Pilot-scale Plutonium-oxide Processing Unit (P3U) providing a flexible capability to produce 200g (Pu basis) samples of plutonium oxide using different chemical processes for use in identifying and validating nuclear forensics signatures associated with plutonium production. Materials produced can also be used as exercise and reference materials.

  8. Human Capital, (Human) Capabilities and Higher Education

    Science.gov (United States)

    Le Grange, L.

    2011-01-01

    In this article I initiate a debate into the (de)merits of human capital theory and human capability theory and discuss implications of the debate for higher education. Human capital theory holds that economic growth depends on investment in education and that economic growth is the basis for improving the quality of human life. Human capable…

  9. New Directions and Capabilities in Analytical Spectrometry

    Institute of Scientific and Technical Information of China (English)

    Gary M. HIEFTJE; Timothy L. DANIELSON; Andrew M. LEACH; Denise M. MCCLENATHAN; Radislav A. POTYRAILO; Steven J. RAY; Andrew W. SZUMLAS; Michael R. WEBB; William C. WETZEL

    2003-01-01

    In this presentation, a number of recent activities in our research group will be highlighted. The studies represent a broad range in the general field of spectrochemical analysis, sometimes take entirely new directions, usually employ novel instrumentation, and all provide important new capabilities in analytical measurements.

  10. Towards an Organizational Economics of Heterogeneous Capabilities

    DEFF Research Database (Denmark)

    Foss, Nicolai Juul

    The notion of “capability” has long been influential in management research as an approach to address firm-level heterogeneity and heterogeneity in competitive outcomes. I discuss how recent advances in economics may allow for a more rigorous understanding and measurement of capability that take...

  11. The Capability Approach: Enabling Musical Learning

    Science.gov (United States)

    Cameron, Kate

    2012-01-01

    Amartya Sen's capability approach offers a new perspective for educators throughout the curriculum. This new insight has the potential to promote a music education that is inherently tailored to the individual. In essence it asks the question: What is music education going to offer to this student? This article represents an initial enquiry into…

  12. Truth and the Capability of Learning

    Science.gov (United States)

    Hinchliffe, Geoffrey

    2007-01-01

    This paper examines learning as a capability, taking as its starting point the work of Amartya Sen and Martha Nussbaum. The paper is concerned to highlight the relation between learning and truth, and it does so by examining the idea of a genealogy of truth and also Donald Davidson's coherence theory. Thus the notion of truth is understood to be…

  13. Critical Capability Pedagogies and University Education

    Science.gov (United States)

    Walker, Melanie

    2010-01-01

    The article argues for an alliance of the capability approach developed by Amartya Sen with ideas from critical pedagogy for undergraduate university education which develops student agency and well being on the one hand, and social change towards greater justice on the other. The purposes of a university education in this article are taken to…

  14. Enabling Joint Interdependence through Capability Portfolio Management

    Science.gov (United States)

    2008-06-13

    strengths, weaknesses, opportunities and threats, or SWOT . Strengths and weaknesses are the product of an internal analysis and represent capabilities...product portfolio analysis . Competitor Analysis : Identity, strategic groups, performance, image, objectives, strategies, culture, cost structure...competitive external environment. The opportunities and threats portion of the SWOT analysis provides insight into what strategic options are available

  15. Capabilities and accessibility: a model for progress

    Directory of Open Access Journals (Sweden)

    Nick Tyler

    2011-11-01

    Full Text Available Accessibility is seen to be a core issue which relates directly to the quality of life: if a person cannot reach and use a facility then they cannot take advantage of the benefits that the facility is seeking to provide. In some cases this is about being able to take part in an activity for enjoyment, but in some it is a question of the exercise of human rights – access to healthcare, education, voting and other citizens’ rights. This paper argues that such an equitable accessibility approach requires understanding of the relationships between the capabilities that a person has and the capabilities required of them by society in order to achieve the accessibility they seek. The Capabilities Model, which has been developed at UCL is an attempt to understand this relationship and the paper sets out an approach to quantifying the capabilities in a way that allows designers and implementers of environmental construction and operation to have a more robust approach to their decisions about providing accessibility.

  16. Organizational capabilities and new market entry processes

    DEFF Research Database (Denmark)

    Nogueira, Leticia Antunes; Andersen, Poul Houman; Drejer, Ina

    This is a conceptual paper that addresses the question of organizational capabilities in the context of firms entering markets that are new to them. The purpose of this work is to outline the theoretical debate on the topic, and propose avenues for empirical investigation....

  17. Le human capabilities per lo sviluppo umano e sociale: la prospettiva della pedagogia (The human capabilities for human and social development: the perspective of pedagogy)

    OpenAIRE

    2016-01-01

    The present essay, moving from a definition of the concept of capabilities in terms of attitudes to ‘make possible’—i.e., inner abilities of every person which, if adequately exploited, permit to operate in a free and responsible way within the society or the institution where he or she lives—aims at highlighting its strong pedagogical value. The definition of capabilities, though developed in economic contexts, exhibits pedagogical foundations inasmuch it emphasizes the centrality of the p...

  18. Ensuring US National Aeronautics Test Capabilities

    Science.gov (United States)

    Marshall, Timothy J.

    2010-01-01

    U.S. leadership in aeronautics depends on ready access to technologically advanced, efficient, and affordable aeronautics test capabilities. These systems include major wind tunnels and propulsion test facilities and flight test capabilities. The federal government owns the majority of the major aeronautics test capabilities in the United States, primarily through the National Aeronautics and Space Administration (NASA) and the Department of Defense (DoD). However, changes in the Aerospace landscape, primarily the decrease in demand for testing over the last 20 years required an overarching strategy for management of these national assets. Therefore, NASA established the Aeronautics Test Program (ATP) as a two-pronged strategic initiative to: (1) retain and invest in NASA aeronautics test capabilities considered strategically important to the agency and the nation, and (2) establish a strong, high level partnership with the DoD. Test facility utilization is a critical factor for ATP because it relies on user occupancy fees to recover a substantial part of the operations costs for its facilities. Decreasing utilization is an indicator of excess capacity and in some cases low-risk redundancy (i.e., several facilities with basically the same capability and overall low utilization). However, low utilization does not necessarily translate to lack of strategic importance. Some facilities with relatively low utilization are nonetheless vitally important because of the unique nature of the capability and the foreseeable aeronautics testing needs. Unfortunately, since its inception, the customer base for ATP has continued to shrink. Utilization of ATP wind tunnels has declined by more than 50% from the FY 2006 levels. This significant decrease in customer usage is attributable to several factors, including the overall decline in new programs and projects in the aerospace sector; the impact of computational fluid dynamics (CFD) on the design, development, and research

  19. 智能电网环境下负荷响应对系统消纳风电能力影响的研究%Research on the effect of load response on system consumption capability of wind power in smart grid

    Institute of Scientific and Technical Information of China (English)

    沈风; 唐建勋; 吴琼

    2016-01-01

    随着可再生能源的跨越式发展,大规模风电并网消纳不畅问题导致了严重的风电弃风现象。智能电网环境中自我响应负荷具有良好的弹性,对于减小风电波动性对电网安全的影响,提高风电资源的利用率十分有益。根据负荷需求响应的特点,建立了基于市场供需比的负荷弹性模型,分析了负荷弹性对系统消纳风电能力的影响。并以10机系统和一个风电场的数据为依据进行了算例分析,即对含风电系统的三种模式下的日前风电消纳情况进行了对比,最后结果表明,负荷弹性可有效减少弃风,提高系统对风电的消纳能力,为电力系统的安全经济运行提供可靠保障。%With the leap-forward development of renewable energy , the poor consumption of large-scale wind power integration leads to serious wind power abandoned .In the environment of smart grid , self response load with good elasticity is beneficial to reduce the influence of wind power volatility on grid security and improve the utilization rate of wind power resource .According to the characteristics of the load demand response , a load elasticity model is estab-lished based on the market supply and demand ratio , and the influence of load elasticity on system consumptive capac-ity of wind power is analyzed .On the basis of the data of 10 machines system and 1 wind farm , three kinds of modes of wind power consumption are compared , the final results show that the load elasticity can reduce the abandon wind power effectively , improve the system consumption capability of wind power , and provide a reliable guarantee for safe and economic operation of power systems .

  20. Food product tracing technology capabilities and interoperability.

    Science.gov (United States)

    Bhatt, Tejas; Zhang, Jianrong Janet

    2013-12-01

    identify the supply-chain partner who provided the information prior to sharing this information with product tracing technology providers. The 9 traceability solution providers who agreed to participate in this project have their systems deployed in a wide range of sectors within the food industry including, but not limited to, livestock, dairy, produce, fruits, seafood, meat, and pork; as well as in pharmaceutical, automotive, retail, and other industries. Some have also been implemented across the globe including Canada, China, USA, Norway, and the EU, among others. This broad commercial use ensures that the findings of this work are applicable to a broad spectrum of the food system. Six of the 9 participants successfully completed the data entry phase of this test. To verify successful data entry for these 6, a demo or screenshots of the data set from each system's user interface was requested. Only 4 of the 6 were able to provide us with this evidence for verification. Of the 6 that completed data entry and moved on to the scenarios phase of the test, 5 were able to provide us with the responses to the scenarios. Time metrics were useful for evaluating the scalability and usability of each technology. Scalability was derived from the time it took to enter the nonstandardized data set into the system (ranges from 7 to 11 d). Usability was derived from the time it took to query the scenarios and provide the results (from a few hours to a week). The time was measured in days it took for the participants to respond after we supplied them all the information they would need to successfully execute each test/scenario. Two of the technology solution providers successfully implemented and participated in a proof-of-concept interoperable framework during Year 2 of this study. While not required, they also demonstrated this interoperability capability on the FSMA-mandated food product tracing pilots for the U.S. FDA. This has significant real-world impact since the

  1. Developing an operational capabilities index of the emergency services sector.

    Energy Technology Data Exchange (ETDEWEB)

    Collins, M.J.; Eaton, L.K.; Shoemaker, Z.M.; Fisher, R.E.; Veselka, S.N.; Wallace, K.E.; Petit, F.D. (Decision and Information Sciences)

    2012-02-20

    In order to enhance the resilience of the Nation and its ability to protect itself in the face of natural and human-caused hazards, the ability of the critical infrastructure (CI) system to withstand specific threats and return to normal operations after degradation must be determined. To fully analyze the resilience of a region and the CI that resides within it, both the actual resilience of the individual CI and the capability of the Emergency Services Sector (ESS) to protect against and respond to potential hazards need to be considered. Thus, a regional resilience approach requires the comprehensive consideration of all parts of the CI system as well as the characterization of emergency services. This characterization must generate reproducible results that can support decision making with regard to risk management, disaster response, business continuity, and community planning and management. To address these issues, Argonne National Laboratory, in collaboration with the U.S. Department of Homeland Security (DHS) Sector Specific Agency - Executive Management Office, developed a comprehensive methodology to create an Emergency Services Sector Capabilities Index (ESSCI). The ESSCI is a performance metric that ranges from 0 (low level of capabilities) to 100 (high). Because an emergency services program has a high ESSCI, however, does not mean that a specific event would not be able to affect a region or cause severe consequences. And because a program has a low ESSCI does not mean that a disruptive event would automatically lead to serious consequences in a region. Moreover, a score of 100 on the ESSCI is not the level of capability expected of emergency services programs; rather, it represents an optimal program that would rarely be observed. The ESSCI characterizes the state of preparedness of a jurisdiction in terms of emergency and risk management. Perhaps the index's primary benefit is that it can systematically capture, at a given point in time, the

  2. Aeroheating Mapping to Thermal Model for Autonomous Aerobraking Capability

    Science.gov (United States)

    Amundsen, Ruth M.

    2010-01-01

    Thermal modeling has been performed to evaluate the potential for autonomous aerobraking of a spacecraft in the atmosphere of a planet. As part of this modeling, the aeroheating flux during aerobraking must be applied to the spacecraft solar arrays to evaluate their thermal response. On the Mars Reconnaissance Orbiter (MRO) mission, this was done via two separate thermal models and an extensive suite of mapping scripts. That method has been revised, and the thermal analysis of an aerobraking pass can now be accomplished via a single thermal model, using a new capability in the Thermal Desktop software. This capability, Boundary Condition Mapper, has the ability to input heating flux files that vary with time, position on the solar array, and with the skin temperature. A recently added feature to the Boundary Condition Mapper is that this module can also utilize files that describe the variation of aeroheating over the surface with atmospheric density (rather than time); this is the format of the MRO aeroheating files. This capability has allowed a huge streamlining of the MRO thermal process, simplifying the procedure for importing new aeroheating files and trajectory information. The new process, as well as the quantified time savings, is described.

  3. Advanced-capability alkaline fuel cell powerplant

    Science.gov (United States)

    Deronck, Henry J.

    The alkaline fuel cell powerplant utilized in the Space Shuttle Orbiter has established an excellent performance and reliability record over the past decade. Recent AFC technology programs have demonstrated significant advances in cell durability and power density. These capabilities provide the basis for substantial improvement of the Orbiter powerplant, enabling new mission applications as well as enhancing performance in the Orbiter. Improved durability would extend the powerplant's time between overhaul fivefold, and permit longer-duration missions. The powerplant would also be a strong candidate for lunar/planetary surface power systems. Higher power capability would enable replacement of the Orbiter's auxiliary power units with electric motors, and benefits mass-critical applications such as the National AeroSpace Plane.

  4. Addition of Tomographic Capabilities to NMIS

    CERN Document Server

    Mullens, J A

    2003-01-01

    This paper describes tomographic capabilities for the Nuclear Materials Identification System (NMIS). The tomographic capabilities add weapons component spatial and material properties information that result in a more detailed item signature (template) and provide more information for physical attributes analyses. The Nuclear Materials Identification System (NMIS) is used routinely to confirm the identity of HEU components in sealed containers. It does this through a radiation signature acquired by shining a sup 2 sup 5 sup 2 Cf source through the container and measuring the radiation at four detectors stacked vertically on the other side. This measurement gives a gamma and neutron radiation transmission profile of the weapons component, mixed with the radiation production due to the induced fissions in the fissile materials. This information is sufficient to match an ''unknown'' weapons component signature to a template signature from a reference item when measuring under controlled conditions. Tomography m...

  5. Capability maturity models for offshore organisational management.

    Science.gov (United States)

    Strutt, J E; Sharp, J V; Terry, E; Miles, R

    2006-12-01

    The goal setting regime imposed by the UK safety regulator has important implications for an organisation's ability to manage health and safety related risks. Existing approaches to safety assurance based on risk analysis and formal safety assessments are increasingly considered unlikely to create the step change improvement in safety to which the offshore industry aspires and alternative approaches are being considered. One approach, which addresses the important issue of organisational behaviour and which can be applied at a very early stage of design, is the capability maturity model (CMM). The paper describes the development of a design safety capability maturity model, outlining the key processes considered necessary to safety achievement, definition of maturity levels and scoring methods. The paper discusses how CMM is related to regulatory mechanisms and risk based decision making together with the potential of CMM to environmental risk management.

  6. Measurement capability overview in PolyNano

    DEFF Research Database (Denmark)

    Calaon, Matteo; Tosello, Guido; Hansen, Hans Nørgaard

    2012-01-01

    requirements such as low uncertainty, high repeatability and resolution, adequate measuring range and availability among the different project partners. Based on the present measurement capability overview and in relation to the objective of PolyNano to “remove the technology barrier between lab‐scale proof......A measurement capability overview has been conducted to evaluate, among the most used instruments in the field of nanometrology, where the PolyNano project should focus its research. The deliverable presents the most relevant instruments to achieve the best possible measurements accuracy matching...... of principle and high volume low cost production”, WP6 future work will be on standardizing new measuring methods through traceable procedures which will enable product quality control implemented in‐line with micro/nano manufacturing processing technologies....

  7. Mental capability of higher school students

    Directory of Open Access Journals (Sweden)

    Кorobeynikov G.V.

    2010-04-01

    Full Text Available Mental capability of higher school students of different specialties: technical (27 male and 35 female, natural (32 male and 30 female and humanitarian (20 male and 26 female were studied. The parameters: perception, attention, memory, thinking and mental capability was studied. The results are showed that the forming of psychophysiological organization of informational processing system in higher school students of different specialties is characterized by geterocronyisms with direction relation of specialty preparation. The learning of technical specialties to results of associative links determined and abstracts concepts forming under the analysis of the concretes objects. The natural specialties to promote of cognitive functions determined and times interval perception forming. The humanitarian specialties characterized of determined of attention and associative thinking functions.

  8. Rope Climbing Robot with Surveillance Capability

    Directory of Open Access Journals (Sweden)

    Kanza Zafar

    2013-08-01

    Full Text Available In the past different engineers and researcher developed robots capable of climbing for various purposes. In this paper we have developed a robot capable of rope climbing in both horizontal and vertical direction. Furthermore, the robot has the ability to perform surveillance using a camera mounted on top of the robot. The quality of the transmitted video from the camera to the computer is clear and stable. Hence the developed robot is a good choice for surveillance purposes. In addition, it can be used to traverse floors of a building. It uses an IR sensor to sense strips attached at each floor. Once the strips are sensed, a dropping mechanism is activated in which a specific object is dropped to the targeted floor or location. The robot can work in automatic mode or manual through RF signals from an RF transmitter. Finally the robot is cost effective compared to many other developed robots for rope climbing.

  9. NASA DOEPOD NDE Capabilities Data Book

    Science.gov (United States)

    Generazio, Edward R.

    2015-01-01

    This data book contains the Directed Design of Experiments for Validating Probability of Detection (POD) Capability of NDE Systems (DOEPOD) analyses of the nondestructive inspection data presented in the NTIAC, Nondestructive Evaluation (NDE) Capabilities Data Book. DOEPOD is designed as a decision support system to validate inspection system, personnel, and protocol demonstrating 0.90 POD with 95% confidence at critical flaw sizes, a90/95. Although 0.90 POD with 95% confidence at critical flaw sizes is often stated as an inspection requirement in inspection documents, including NASA Standards, NASA critical aerospace applications have historically only accepted 0.978 POD or better with a 95% one-sided lower confidence bound exceeding 0.90 at critical flaw sizes, a90/95.

  10. BIM Innovation Capability Programme - Irish BIM Study

    OpenAIRE

    McAuley, Barry; Hore, Alan; West, Roger

    2016-01-01

    In 2011 the Royal Institute of Architects Ireland (RIAI) conducted a survey which found that BIM adoption within Ireland was quite low at 16%. Over the last five years these figures have risen significantly, with the 2016 Irish Digital Transition Survey reporting that 76% of respondents possess confidence in their organisation’s BIM skills and knowledge. This represents a significant shift of BIM adoption in Ireland over the last five years. The BIM Innovation Capability Programme (BICP) I...

  11. Logistics capabilities for sustainable competitive advantage

    OpenAIRE

    Sandberg, Erik; Abrahamsson, Mats

    2011-01-01

    The purpose of this paper is to explore how sustainable competitive advantage is generated in two Swedish best practice companies that successfully exploit logistics as a source for competitive advantage. Using a theoretical framework based on the resource-based view of the firm, this research elaborates on the links between operational and dynamic logistics capabilities and sustainable competitive advantage. The findings conclude that a sustainable competitive advantage is based on a combina...

  12. Manufacturing fuel-switching capability, 1988

    Energy Technology Data Exchange (ETDEWEB)

    1991-09-01

    Historically, about one-third of all energy consumed in the United States has been used by manufacturers. About one-quarter of manufacturing energy is used as feedstocks and raw material inputs that are converted into nonenergy products; the remainder is used for its energy content. During 1988, the most recent year for which data are available, manufacturers consumed 15.5 quadrillion British thermal units (Btu) of energy to produce heat and power and to generate electricity. The manufacturing sector also has widespread capabilities to switch from one fuel to another for either economic or emergency reasons. There are numerous ways to define fuel switching. For the purposes of the Manufacturing Energy Consumption Survey (MECS), fuel switching is defined as the capability to substitute one energy source for another within 30 days with no significant modifications to the fuel-consuming equipment, while keeping production constant. Fuel-switching capability allows manufacturers substantial flexibility in choosing their mix of energy sources. The consumption of a given energy source can be maximized if all possible switching into that energy source takes place. The estimates in this report are based on data collected on the 1988 Manufacturing Energy Consumption Survey (MECS), Forms 846 (A through C). The EIA conducts this national sample survey of manufacturing energy consumption on a triennial basis. The MECS is the only comprehensive source of national-level data on energy-related information for the manufacturing industries. The MECS was first conducted in 1986 to collect data for 1985. This report presents information on the fuel-switching capabilities of manufacturers in 1988. This report is the second of a series based on the 1988 MECS. 8 figs., 31 tabs.

  13. Annual Industrial Capabilities Report to Congress

    Science.gov (United States)

    2007-02-01

    currently fielded M291 Skin Decontamination Kit (M291 SDK) or begin full rate production of Reactive Skin Decontaminant Lotion ( RSDL ). The study...concluded that exclusive award of RSDL will shrink the supplier base for the M291 SDK because the Department of Defense is the major buyer of the...product. The sole award of RSDL or M291 SDK will not have any long-term adverse impact on the sector, future capabilities, and manufacturing capacity

  14. Entrepreneurship and human development: A capability approach

    OpenAIRE

    Gries, Thomas; Naudé, Wim

    2010-01-01

    We provide a formal model of entrepreneurship in human development. The framework is provided by the capabilities approach (CA). Hence we extend not only the conceptualisation of entrepreneurship in development, but the reach of the CA into entrepreneurship. From a CA view, entrepreneurship is not only a production factor, or a means to an end, as is often taken to be the case by economists, but also an end in itself. Entrepreneurship can be a human functioning and can contribute towards expa...

  15. P and e identification capabilities CAPRICE

    Energy Technology Data Exchange (ETDEWEB)

    Basini, G. [INFN, Laboratori Nazionali di Frascati, Rome (Italy); Codino, A.; Grimani, C. [Perugia Univ. (Italy)]|[INFN, Perugia (Italy); De Pascale, M.P. [Rome Univ. `Tor Vergata` (Italy)]|[INFN, Rome (Italy); Hof, M. [Siegen Univ. (Germany). Fachbereich Physik; Golden, R.L. [New Mexico State Univ., Las Cruces, NM (United States). Particle Astrophysics Lab.; Brancaccio, F.; Bocciolini, M. [Florence Univ. (Italy)]|[INFN, Florence (Italy); Barbiellini, G.; Boezio, M. [Trieste Univ. (Italy)]|[INFN, Trieste (Italy)

    1995-09-01

    The cosmic antiparticle ring imaging Cherenkov experiment (CAPRICE) flew on a stratospheric balloon 8-9 August 1994 over northern Canada and collected data for more than 21 hours with less than 5 g/cm{sup 2} of residual atmosphere. The instrument includes a solid radiator RICH detector and an electromagnetic calorimeter for particle identification in the magnetic spectrometer. Preliminary antiproton and positron identification capabilities are presented.

  16. Satellite-based Tropical Cyclone Monitoring Capabilities

    Science.gov (United States)

    Hawkins, J.; Richardson, K.; Surratt, M.; Yang, S.; Lee, T. F.; Sampson, C. R.; Solbrig, J.; Kuciauskas, A. P.; Miller, S. D.; Kent, J.

    2012-12-01

    Satellite remote sensing capabilities to monitor tropical cyclone (TC) location, structure, and intensity have evolved by utilizing a combination of operational and research and development (R&D) sensors. The microwave imagers from the operational Defense Meteorological Satellite Program [Special Sensor Microwave/Imager (SSM/I) and the Special Sensor Microwave Imager Sounder (SSMIS)] form the "base" for structure observations due to their ability to view through upper-level clouds, modest size swaths and ability to capture most storm structure features. The NASA TRMM microwave imager and precipitation radar continue their 15+ yearlong missions in serving the TC warning and research communities. The cessation of NASA's QuikSCAT satellite after more than a decade of service is sorely missed, but India's OceanSat-2 scatterometer is now providing crucial ocean surface wind vectors in addition to the Navy's WindSat ocean surface wind vector retrievals. Another Advanced Scatterometer (ASCAT) onboard EUMETSAT's MetOp-2 satellite is slated for launch soon. Passive microwave imagery has received a much needed boost with the launch of the French/Indian Megha Tropiques imager in September 2011, basically greatly supplementing the very successful NASA TRMM pathfinder with a larger swath and more frequent temporal sampling. While initial data issues have delayed data utilization, current news indicates this data will be available in 2013. Future NASA Global Precipitation Mission (GPM) sensors starting in 2014 will provide enhanced capabilities. Also, the inclusion of the new microwave sounder data from the NPP ATMS (Oct 2011) will assist in mapping TC convective structures. The National Polar orbiting Partnership (NPP) program's VIIRS sensor includes a day night band (DNB) with the capability to view TC cloud structure at night when sufficient lunar illumination exits. Examples highlighting this new capability will be discussed in concert with additional data fusion efforts.

  17. Business Models for Cost Sharing & Capability Sustainment

    Science.gov (United States)

    2012-08-18

    business models need to adapt in a continuous process in most cases, notably the major platforms and technologies featured in this research. Demil and...capability or availability. The business model, as seen by Demil and Lecocq (2010), delivers dynamic consistency by ensuring that profitability and...business of projects. Cambridge, UK: Cambridge University Press. Demil , B., & Lecocq, X. (2010). Business model evolution: In search of dynamic

  18. The Logic of Resources and Capabilities

    OpenAIRE

    2016-01-01

    This paper introduces the logic of resources and (agents') capabilities (LRC) as a logic designed to describe and reason about key aspects of social behaviour in organizations. The results of the present paper (soundness, completeness, canonicity, conservative analytic calculus with cut-elimination and subformula property) lay at the intersection of the algebraic theory of unified correspondence and the theory of multi-type calculi in structural proof theory. Case studies are discussed which ...

  19. Heutagogic approach to developing capable learners.

    Science.gov (United States)

    Abraham, Reem Rachel; Komattil, Ramnarayan

    2017-03-01

    The twenty-first century higher education sector has come a long way after undergoing continuous metamorphosis from pedagogy to andragogy. Most of the educational approaches adopted in medical schools are directed towards developing more of competencies and less of capability, which is the ability to use competencies in novel contexts. Competencies alone are not sufficient to thrive in the present day work place as medical profession subsumes complex contexts; it is in this scenario that, medical educators are entrusted with the challenging task of developing "capable learners". In the heutagogical approach, learners are required to decide upon what to learn and how to learn and therefore the control of the learning process is on the learner and the role of the teacher becomes that of a navigator. This paper highlights the current higher educational practices based on heutagogy, considers its application in the context of Problem-based learning and also discusses a few challenges in incorporating this approach in the existing undergraduate medical curriculum. The article proposes the use of social media in order to support learner autonomy, which in turn improves learners' cognitive engagement with content and tasks, thereby assisting the development of attributes associated with capability.

  20. Assessment of cold neutron radiography capability

    Energy Technology Data Exchange (ETDEWEB)

    McDonald, T.E. Jr.; Roberts, J.A.

    1998-12-31

    This is the final report of a one-year, Laboratory Directed Research and Development (LDRD) project at Los Alamos National Laboratory (LANL). The authors goals were to demonstrate and assess cold neutron radiography techniques at the Los Alamos Neutron Science Center (LANSCE), Manual Lujan Neutron Scattering Center (Lujan Center), and to investigate potential applications of the capability. The authors have obtained images using film and an amorphous silicon detector. In addition, a new technique they have developed allows neutron radiographs to be made using only a narrow range of neutron energies. Employing this approach and the Bragg cut-off phenomena in certain materials, they have demonstrated material discrimination in radiography. They also demonstrated the imaging of cracks in a sample of a fire-set case that was supplied by Sandia National Laboratory, and they investigated whether the capability could be used to determine the extent of coking in jet engine nozzles. The LANSCE neutron radiography capability appears to have applications in the DOE stockpile maintenance and science-based stockpile stewardship (SBSS) programs, and in industry.

  1. Gendering dynamic capabilities in micro firms

    Directory of Open Access Journals (Sweden)

    Yevgen Bogodistov

    2017-05-01

    Full Text Available Gender issues are well-researched in the general management literature, particular in studies on new ventures. Unfortunately, gender issues have been largely ignored in the dynamic capabilities litera­ture. We address this gap by analyzing the effects of gender diversity on dynamic capabilities among micro firms. We consider the gender of managers and personnel in 124 Ukrainian tourism micro firms. We examine how a manager’s gender affects the firm’s sensing capacities and investigate how it moderates team gender diversity’s impact on sensing capacities. We also investigate how person­nel composition impacts seizing and reconfiguration capacities. We find that female managers have several shortcomings concerning a firm’s sensing capacity but that personnel gender diversity increa­ses this capacity. Team gender diversity has positive effects on a firm’s seizing and reconfiguration abilities. Our study advances research on gender diversity and its impact on firm capabilities and illustrates its relevance for staffing practices in micro firms.

  2. Jason 2: A Review of Capabilities

    Science.gov (United States)

    Elder, R. L.; Bowen, A. D.; Heintz, M. C.; Naiman, M.; Taylor, C. L.; Sellers, W. J.; Whitcomb, L. L.; Howland, J. C.

    2003-12-01

    The family of remotely operated vehicles (ROVs) operated by Woods Hole Oceanographic Institution (WHOI) for the United States oceanographic research community through the University National Oceanographic Laboratory System (UNOLS), represent some of the most advanced tools and technology available for accomplishing a wide variety of deep submergence science and operations. Over the past five years, research done using these vehicles has provided major contributions to the understanding of deep-sea geological, chemical and biological processes at mid-ocean ridges (MORs). The ROV systems have also contributed to successful deployment of ocean floor observatory monitors and various sensors that seek to understand the geophysical and geotechnical properties of young crust and provide an ability to make routine time series measurements. As a result of experience gained during over 25 cruises with Jason and its companion vehicles and input from the user community and the DEep Submergence Science Committee (DESSC) of UNOLS, WHOI has recently completed an upgrade to the Jason vehicle. This has resulted in substantive additions to the vehicle's capabilities, particularly in the area of propulsion power and manipulative capabilities. During its first complete year of operation, the vehicle has operated a cumulative total of approximately 60 days in the water at depths up to a maximum of 6,500 meters. This poster will describe the capabilities of the new Jason vehicle and briefly review if achievements.

  3. Collision avoidance for CTV: Requirements and capabilities

    Science.gov (United States)

    Nosek, Thomas P.

    Cargo transfer vehicle (CTV) operations near Space Station Freedom will require positive collision avoidance maneuver (CAM) capability to preclude any change of collision, even in the event of CTV failures. The requirements for CAM are discussed, and the CAM design approach and design of the Orbiting Maneuvering Vehicle (OMV) are reviewed; this design met requirements for OMV operation near the Space Station, provided a redundant collision avoidance maneuver capability. Significant portions of the OMV CAM design should be applicable to CTV. The key features of the OMV design are summarized and related to the CTV mission design to that of OMV's. CAM is a defined sequence of events executed by the CTV to place the vehicle in a safe position relative to a target such as the Space Station. CAM can be performed through software commands to the propulsion system, or through commands pre-stored in hardware. Various techniques for triggering CAM are considered, and the risks associated with CAM enable and execution in phases are considered. OMV CAM design features both hardware and software CAM capability, with analyses conducted to assess the ability to meet the collision-free requirement during all phases of the mission.

  4. Capable and credible? Challenging nutrition science.

    Science.gov (United States)

    Penders, Bart; Wolters, Anna; Feskens, Edith F; Brouns, Fred; Huber, Machteld; Maeckelberghe, Els L M; Navis, Gerjan; Ockhuizen, Theo; Plat, Jogchum; Sikkema, Jan; Stasse-Wolthuis, Marianne; van 't Veer, Pieter; Verweij, Marcel; de Vries, Jan

    2017-07-17

    Nutrition science has enriched our understanding of how to stay healthy by producing valuable knowledge about the interaction of nutrients, food, and the human body. Nutrition science also has raised societal awareness about the links between food consumption and well-being, and provided the basis for food regulations and dietary guidelines. Its collaborative and interdisciplinary research has accomplished much, scientifically and socially. Despite this, nutrition science appears to be in crisis and is currently confronted with a public reluctance to trust nutritional insights. Though deflating trust is a general phenomenon surrounding the scientific community, its impact on nutrition science is particularly strong because of the crucial role of nutrition in everyone's daily life. We, a Dutch collective of nutritionists, medical doctors, philosophers and sociologists of science ( http://www.nutritionintransition.nl ), have diagnosed that nutrition science is meeting inherent boundaries. This hampers conceptual and methodological progress and the translation of novel insights into societal benefit and trust. In other words, nutrition science is facing limitations to its capability and credibility, impeding its societal value. We take up the challenge to halt the threatening erosion of nutrition science's capability and credibility, and explore a way forward. We analyse limitations to capability and credibility, then argue that nutrition science is caught in a vicious circle, and end by offering some suggestions to transcend the limitations and escape the current deadlock. We invite nutritional experts as well as scholars from adjacent disciplines to engage in the discussion.

  5. Synthetic Immunology: Hacking Immune Cells to Expand Their Therapeutic Capabilities.

    Science.gov (United States)

    Roybal, Kole T; Lim, Wendell A

    2017-04-26

    The ability of immune cells to survey tissues and sense pathologic insults and deviations makes them a unique platform for interfacing with the body and disease. With the rapid advancement of synthetic biology, we can now engineer and equip immune cells with new sensors and controllable therapeutic response programs to sense and treat diseases that our natural immune system cannot normally handle. Here we review the current state of engineered immune cell therapeutics and their unique capabilities compared to small molecules and biologics. We then discuss how engineered immune cells are being designed to combat cancer, focusing on how new synthetic biology tools are providing potential ways to overcome the major roadblocks for treatment. Finally, we give a long-term vision for the use of synthetic biology to engineer immune cells as a general sensor-response platform to precisely detect disease, to remodel disease microenvironments, and to treat a potentially wide range of challenging diseases.

  6. Expanding capabilities of the debris analysis workstation

    Science.gov (United States)

    Spencer, David B.; Sorge, Marlon E.; Mains, Deanna L.; Shubert, Ann J.; Gerhart, Charlotte M.; Yates, Ken W.; Leake, Michael

    1996-10-01

    Determining the hazards from debris-generating events is a design and safety consideration for a number of space systems, both currently operating and planned. To meet these and other requirements, the United States Air Force (USAF) Phillips Laboratory (PL) Space Debris Research Program has developed a simulation software package called the Debris Analysis Workstation (DAW). This software provides an analysis capability for assessing a wide variety of debris hazards. DAW integrates several component debris analysis models and data visualization tools into a single analysis platform that meets the needs for Department of Defense space debris analysis, and is both user friendly and modular. This allows for studies to be performed expeditiously by analysts who are not debris experts. The current version of DAW includes models for spacecraft breakup, debris orbital lifetime, collision hazard risk assessment, and collision dispersion, as well as a satellite catalog database manager, a drag inclusive propagator, a graphical user interface, and data visualization routines. Together they provide capabilities to conduct several types of analyses, ranging from range safety assessments to satellite constellation risk assessment. Work is progressing to add new capabilities with the incorporation of additional models and improved designs. The existing tools are in their initial integrated form, but the 'glue' that will ultimately bring them together into an integrated system is an object oriented language layer scheduled to be added soon. Other candidate component models under consideration for incorporation include additional orbital propagators, error estimation routines, other dispersion models, and other breakup models. At present, DAW resides on a SUNR workstation, although future versions could be tailored for other platforms, depending on the need.

  7. Medical Data Architecture Project Capabilities and Design

    Science.gov (United States)

    Middour, C.; Krihak, M.; Lindsey, A.; Marker, N.; Wolfe, S.; Winther, S.; Ronzano, K.; Bolles, D.; Toscano, W.; Shaw, T.

    2017-01-01

    Mission constraints will challenge the delivery of medical care on a long-term, deep space exploration mission. This type of mission will be restricted in the availability of medical knowledge, skills, procedures and resources to prevent, diagnose, and treat in-flight medical events. Challenges to providing medical care are anticipated, including resource and resupply constraints, delayed communications and no ability for medical evacuation. The Medical Data Architecture (MDA) project will enable medical care capability in this constrained environment. The first version of the system, called "Test Bed 1," includes capabilities for automated data collection, data storage and data retrieval to provide information to the Crew Medical Officer (CMO). Test Bed 1 seeks to establish a data architecture foundation and develop a scalable data management system through modular design and standardized interfaces. In addition, it will demonstrate to stakeholders the potential for an improved, automated, flow of data to and from the medical system over the current methods employed on the International Space Station (ISS). It integrates a set of external devices, software and processes, and a Subjective, Objective, Assessment, and Plan (SOAP) note commonly used by clinicians. Medical data like electrocardiogram plots, heart rate, skin temperature, respiration rate, medications taken, and more are collected from devices and stored in the Electronic Medical Records (EMR) system, and reported to crew and clinician. Devices integrated include the Astroskin biosensor vest and IMED CARDIAX electrocardiogram (ECG) device with INEED MD ECG Glove, and the NASA-developed Medical Dose Tracker application. The system is designed to be operated as a standalone system, and can be deployed in a variety of environments, from a laptop to a data center. The system is primarily composed of open-source software tools, and is designed to be modular, so new capabilities can be added. The software

  8. Orbital maneuvering vehicle: A new capability

    Science.gov (United States)

    Huber, William G.

    The Orbital Maneuvering Vehicle (OMV) is a reusable, remotely controlled, free-flying vehicle being developed by NASA to perform a wide range of on-orbit missions and services in support of orbiting spacecraft. The OMV is capable of satellite delivery, retrieval, reboost, controlled deorbit, viewing, and subsatellite support missions. It is an important extension to the Space Transportation System and a key element of the Space Station operational scenario. The OMV can operate from the Shuttle, the Space Station, or can be space based. The OMV, being 15 ft in diameter and approximately 4 1/2 thick, mounts directly into the Shuttle payload bay. The vehicle design is highly modular, consisting of a Short Range Vehicle containing both hydrazine and cold gas RCS systems and all the avionics systems for electrical power, communications, data management, guidance, navigation, and 6-degree of freedom control. This vehicle weighs approximately 6,500 lb and can accomplish a high percentage of the project missions. For high delta-velocity missions, a bipropellant Propulsion Module (approximately 11,000lb) is added, giving a total weight of 17,500 lb. This module can be exchanged on orbit to effect bipropellant refueling. All the RCS and avionics modules are replaceable on orbit for maintenance. The OMV development program was initiated in 1986 with the selection of TRW as the prime contractor. The first flight is projected for 1991. An early planned use of OMV is to reboost the Hubble Space Telescope when required because of atmospheric drag. This paper contains details of the program status, vehicle description, and mission capabilities. The purpose of the paper is to acquaint the international space community with OMV capabilities and to stimulate the identification of new and unique mission applications.

  9. Synthetic aperture radar capabilities in development

    Energy Technology Data Exchange (ETDEWEB)

    Miller, M. [Lawrence Livermore National Lab., CA (United States)

    1994-11-15

    The Imaging and Detection Program (IDP) within the Laser Program is currently developing an X-band Synthetic Aperture Radar (SAR) to support the Joint US/UK Radar Ocean Imaging Program. The radar system will be mounted in the program`s Airborne Experimental Test-Bed (AETB), where the initial mission is to image ocean surfaces and better understand the physics of low grazing angle backscatter. The Synthetic Aperture Radar presentation will discuss its overall functionality and a brief discussion on the AETB`s capabilities. Vital subsystems including radar, computer, navigation, antenna stabilization, and SAR focusing algorithms will be examined in more detail.

  10. Radio Frequency Simulation System (RFSS) Capabilities Summary

    Science.gov (United States)

    1977-04-01

    S- 0LEVEL-- TECHNICAL REPORT TD -77-8 RADIO FREQUENCY SIMULATION SYSTEM (RFSS) CAPABILITIES SUMMARY 00 SAeroballistios Directorate Advanced Simulation...gAttn: DRDMT - TD /AMCMS 63 303.214131101 RedstngArj gUAl. Alabmt 35809______________ It CONTITL.uNG OFFICE NAME AND ADDRESS CoMuaa ner US Army Missile...r ~- -- 0 0 0 1 N -4 -- -~ *5 0 - 5e41 -A I: a 00 I I. S Jto cc iI us V A U. II I’~z’LF~iJ - - - - -> 3-cc dc -4 -.40 =! Jo -AZC 4 C - 442q 0 M~A $Ji a

  11. New multivariable capabilities of the INCA program

    Science.gov (United States)

    Bauer, Frank H.; Downing, John P.; Thorpe, Christopher J.

    1989-01-01

    The INteractive Controls Analysis (INCA) program was developed at NASA's Goddard Space Flight Center to provide a user friendly, efficient environment for the design and analysis of control systems, specifically spacecraft control systems. Since its inception, INCA has found extensive use in the design, development, and analysis of control systems for spacecraft, instruments, robotics, and pointing systems. The (INCA) program was initially developed as a comprehensive classical design analysis tool for small and large order control systems. The latest version of INCA, expected to be released in February of 1990, was expanded to include the capability to perform multivariable controls analysis and design.

  12. Molecular Contamination Investigation Facility (MCIF) Capabilities

    Science.gov (United States)

    Soules, David M.

    2013-01-01

    This facility was used to guide the development of ASTM E 1559 center dot Multiple Quartz Crystal Microbalances (QCMs), large sample and spectral effects capability center dot Several instrumented, high vacuum chamber systems are used to evaluate the molecular outgassing characteristics of materials, flight components and other sensitive surfaces. Test materials for spacecraft/instrument selection center.Test flight components for acceptable molecular outgas levels center dot Determine time/temperature vacuum bake-out requirements center. Data used to set limits for use of materials and specific components center. Provide Input Data to Contamination Transport Models -Applied to numerous flight projects over the past 20 years.

  13. Computational Scenario-based Capability Planning

    CERN Document Server

    Abbass, Hussein; Dam, Helen; Baker, Stephen; Whitacre, James M; Sarker, Ruhul; 10.1145/1389095.1389378

    2009-01-01

    Scenarios are pen-pictures of plausible futures, used for strategic planning. The aim of this investigation is to expand the horizon of scenario-based planning through computational models that are able to aid the analyst in the planning process. The investigation builds upon the advances of Information and Communication Technology (ICT) to create a novel, flexible and customizable computational capability-based planning methodology that is practical and theoretically sound. We will show how evolutionary computation, in particular evolutionary multi-objective optimization, can play a central role - both as an optimizer and as a source for innovation.

  14. Aviation System Analysis Capability Executive Assistant Design

    Science.gov (United States)

    Roberts, Eileen; Villani, James A.; Osman, Mohammed; Godso, David; King, Brent; Ricciardi, Michael

    1998-01-01

    In this technical document, we describe the design developed for the Aviation System Analysis Capability (ASAC) Executive Assistant (EA) Proof of Concept (POC). We describe the genesis and role of the ASAC system, discuss the objectives of the ASAC system and provide an overview of components and models within the ASAC system, and describe the design process and the results of the ASAC EA POC system design. We also describe the evaluation process and results for applicable COTS software. The document has six chapters, a bibliography, three appendices and one attachment.

  15. Conceptual Model of IT Infrastructure Capability and Its Empirical Justification

    Institute of Scientific and Technical Information of China (English)

    QI Xianfeng; LAN Boxiong; GUO Zhenwei

    2008-01-01

    Increasing importance has been attached to the value of information technology (IT) infrastructure in today's organizations. The development of efficacious IT infrastructure capability enhances business performance and brings sustainable competitive advantage. This study analyzed the IT infrastructure capability in a holistic way and then presented a concept model of IT capability. IT infrastructure capability was categorized into sharing capability, service capability, and flexibility. This study then empirically tested the model using a set of survey data collected from 145 firms. Three factors emerge from the factor analysis as IT flexibility, IT service capability, and IT sharing capability, which agree with those in the conceptual model built in this study.

  16. Tonopah Test Range capabilities: technical manual

    Energy Technology Data Exchange (ETDEWEB)

    Manhart, R.L.

    1982-11-01

    This manual describes Tonopah Test Range (TTR), defines its testing capabilities, and outlines the steps necessary to schedule tests on the Range. Operated by Sandia National Laboratories, TTR is a major test facility for DOE-funded weapon programs. The Range presents an integrated system for ballistic test vehicle tracking and data acquisition. Multiple radars, optical trackers, telemetry stations, a central computer complex, and combined landline/RF communications systems assure full Range coverage for any type of test. Range operations are conducted by a department within Sandia's Field Engineering Directorate. While the overall Range functions as a complete system, it is operationally divided into the Test Measurements, Instrumentation Development, and Range Operations divisions. The primary function of TTR is to support DOE weapons test activities. Management, however, encourages other Government agencies and their contractors to schedule tests on the Range which can make effective use of its capabilities. Information concerning Range use by organizations outside of DOE is presented. Range instrumentation and support facilities are described in detail. This equipment represents the current state-of-the-art and reflects a continuing commitment by TTR management to field the most effective tracking and data acquisition system available.

  17. SAPHIRE 8 New Features and Capabilities

    Energy Technology Data Exchange (ETDEWEB)

    Curtis Smith

    2008-08-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) software performs probabilistic risk assessment (PRA) calculations. SAPHIRE is used in support of NRC’s risk-informed programs such as the Accident Sequence Precursor (ASP) program, Management Directive 8.3, “NRC Incident Investigation Program,” or the Significance Determination Process (SDP). It is also used to develop and run the Standardized Plant Analysis Risk (SPAR) models. SAPHIRE Version 8 is a new version of the software with an improved interface and capabilities to support risk-informed programs. SAPHIRE Version 8 is designed to easily handle larger and more complex models. Applications of previous SAPHIRE versions indicated the need to build and solve models with a large number of sequences. Risk assessments that include endstate evaluations for core damage frequency and large, early release frequency evaluations have greatly increased the number of sequences required. In addition, the complexity of the models has increased since risk assessments evaluate both potential internal and external events, as well as different plant operational states. Special features of SAPHIRE 8 help create and run integrated models which may be composed of different model types. SAPHIRE 8 includes features and capabilities that are new or improved over the current Version 7 to address the new requirements for risk-informed programs and SPAR models. These include: • Improved User Interfaces • Model development • Methods • General Support Features

  18. Systems Engineering for Space Exploration Medical Capabilities

    Science.gov (United States)

    Mindock, Jennifer; Reilly, Jeffrey; Urbina, Michelle; Hailey, Melinda; Rubin, David; Reyes, David; Hanson, Andrea; Burba, Tyler; McGuire, Kerry; Cerro, Jeffrey; Middour, Chris

    2017-01-01

    Human exploration missions to beyond low Earth orbit destinations such as Mars will present significant new challenges to crew health management during a mission compared to current low Earth orbit operations. For the medical system, lack of consumable resupply, evacuation opportunities, and real-time ground support are key drivers toward greater autonomy. Recognition of the limited mission and vehicle resources available to carry out exploration missions motivates the Exploration Medical Capability (ExMC) Element's approach to enabling the necessary autonomy. The Element's work must integrate with the overall exploration mission and vehicle design efforts to successfully provide exploration medical capabilities. ExMC is applying systems engineering principles and practices to accomplish its integrative goals. This paper discusses the structured and integrative approach that is guiding the medical system technical development. Assumptions for the required levels of care on exploration missions, medical system guiding principles, and a Concept of Operations are early products that capture and clarify stakeholder expectations. Mobel-Based Systems Engineering techniques are then applied to define medical system behavior and architecture. Interfaces to other flight and ground systems, and within the medical system are identified and defined. Initial requirements and traceability are established, which sets the stage for identification of future technology development needs. An early approach for verification and validation, taking advantage of terrestrial and near-Earth exploration system analogs, is also defined to further guide system planning and development.

  19. Systems Engineering for Space Exploration Medical Capabilities

    Science.gov (United States)

    Mindock, Jennifer; Reilly, Jeffrey; Rubin, David; Urbina, Michelle; Hailey, Melinda; Hanson, Andrea; Burba, Tyler; McGuire, Kerry; Cerro, Jeffrey; Middour, Chris; hide

    2017-01-01

    Human exploration missions that reach destinations beyond low Earth orbit, such as Mars, will present significant new challenges to crew health management. For the medical system, lack of consumable resupply, evacuation opportunities, and real-time ground support are key drivers toward greater autonomy. Recognition of the limited mission and vehicle resources available to carry out exploration missions motivates the Exploration Medical Capability (ExMC) Element's approach to enabling the necessary autonomy. The Element's work must integrate with the overall exploration mission and vehicle design efforts to successfully provide exploration medical capabilities. ExMC is applying systems engineering principles and practices to accomplish its goals. This paper discusses the structured and integrative approach that is guiding the medical system technical development. Assumptions for the required levels of care on exploration missions, medical system goals, and a Concept of Operations are early products that capture and clarify stakeholder expectations. Model-Based Systems Engineering techniques are then applied to define medical system behavior and architecture. Interfaces to other flight and ground systems, and within the medical system are identified and defined. Initial requirements and traceability are established, which sets the stage for identification of future technology development needs. An early approach for verification and validation, taking advantage of terrestrial and near-Earth exploration system analogs, is also defined to further guide system planning and development.

  20. Collaborative environments for capability-based planning

    Science.gov (United States)

    McQuay, William K.

    2005-05-01

    Distributed collaboration is an emerging technology for the 21st century that will significantly change how business is conducted in the defense and commercial sectors. Collaboration involves two or more geographically dispersed entities working together to create a "product" by sharing and exchanging data, information, and knowledge. A product is defined broadly to include, for example, writing a report, creating software, designing hardware, or implementing robust systems engineering and capability planning processes in an organization. Collaborative environments provide the framework and integrate models, simulations, domain specific tools, and virtual test beds to facilitate collaboration between the multiple disciplines needed in the enterprise. The Air Force Research Laboratory (AFRL) is conducting a leading edge program in developing distributed collaborative technologies targeted to the Air Force's implementation of systems engineering for a simulation-aided acquisition and capability-based planning. The research is focusing on the open systems agent-based framework, product and process modeling, structural architecture, and the integration technologies - the glue to integrate the software components. In past four years, two live assessment events have been conducted to demonstrate the technology in support of research for the Air Force Agile Acquisition initiatives. The AFRL Collaborative Environment concept will foster a major cultural change in how the acquisition, training, and operational communities conduct business.

  1. Evaluation of SMART load follow operation capability

    Energy Technology Data Exchange (ETDEWEB)

    Song, Jae Seung; Zee, Sung Quun

    1998-07-01

    The daily load follow operation capability of SMART, which is 330 MWth integral reactor with boron free operation concept, was evaluated. In the boron free operation core the axial offset(AO) can not be limited or limited by wider range than the typical PWR that uses soluble boron. Current SMART conceptual core design does not have the limit for the axial offset and the operation is limited by three dimensional local power peak. In this report, the capability of load follow operation is evaluated for 14-2-6-2 daily load follow by 50% power reduction that is very typical in the large commercial power reactors. The cycle length of SMART is limited by three dimensional local power peak and the nominal axial power distribution is top skewed at the end of cycle. When the power returns to 100%, control rod should be withdrawn for the compensation of reactivity decrease due to the xenon buildup. The control rod withdrawal results in the increase of three dimensional local power peak. To solve this problem, an operation strategy for the control of local peak. To solve this problem, an operation strategy for the control of local peak was established and it was shown that the strategy is effective in controlling the local peak less than target value of the three dimensional local power peak. (author). 7 refs., 5 tabs., 13 figs.

  2. China's ASAT Weapon: Capabilities and the Potential Threat

    Science.gov (United States)

    Forden, Geoffrey

    2008-04-01

    Much has been said about China's 11 January 2007 test of an anti-satellite (ASAT) weapon but few analysts have based their comments on a scientific determination of the weapons capabilities. This paper presents such an analysis derived from the observed pattern of debris, as observed by NORAD and posted on-line by NASA. It is clear that this was a direct hit-to-kill weapon (as opposed to a fragmentation-type explosive warhead), it massed about 600 kg, and was capable of accelerations of at least 6 Gs. It can be inferred with a reasonable degree of confidence that it used an on-board optical tracker, most likely operating in visible light. Furthermore, since the closing speed between the target satellite and the interceptor was 8 km/s during the test, this weapon could be used to attack satellites at higher altitude orbits, such as NAVSTAR/GPS and geostationary satellites that include communications and early warning satellites. This test produced ten times as many pieces of debris as an earlier US hit-to-kill ASAT test which, because of their higher altitudes, will last thousands of years---hundreds of times longer than the debris in the US test. China's test increased the chances of some low earth orbit satellite being hit by a piece of debris by 50%, from about 12% to 18% each year. Given this weapon's capabilities, it is possible to ``war game'' what an all-out Chinese ASAT attack would look like and what responses the US could take. (It is important to emphasize that this is a capabilities-based exercise and not based on Chinese intentions.) If China did launch such an attack, it could eliminate a large fraction of US military satellites in low earth orbit including photo-reconnaissance and electronic intelligence satellites, but not all of them, in the first 24 hours; the requirement that the target satellites be illuminated by the sun limits the attack. Furthermore, the US could maneuver its LEO satellites in the first hours of the attack and greatly

  3. NASA's Space Launch System: An Evolving Capability for Exploration An Evolving Capability for Exploration

    Science.gov (United States)

    Creech, Stephen D.; Crumbly, Christopher M.; Robinson, Kimerly F.

    2016-01-01

    A foundational capability for international human deep-space exploration, NASA's Space Launch System (SLS) vehicle represents a new spaceflight infrastructure asset, creating opportunities for mission profiles and space systems that cannot currently be executed. While the primary purpose of SLS, which is making rapid progress towards initial launch readiness in two years, will be to support NASA's Journey to Mars, discussions are already well underway regarding other potential utilization of the vehicle's unique capabilities. In its initial Block 1 configuration, capable of launching 70 metric tons (t) to low Earth orbit (LEO), SLS is capable of propelling the Orion crew vehicle to cislunar space, while also delivering small CubeSat-class spacecraft to deep-space destinations. With the addition of a more powerful upper stage, the Block 1B configuration of SLS will be able to deliver 105 t to LEO and enable more ambitious human missions into the proving ground of space. This configuration offers opportunities for launching co-manifested payloads with the Orion crew vehicle, and a class of secondary payloads, larger than today's CubeSats. Further upgrades to the vehicle, including advanced boosters, will evolve its performance to 130 t in its Block 2 configuration. Both Block 1B and Block 2 also offer the capability to carry 8.4- or 10-m payload fairings, larger than any contemporary launch vehicle. With unmatched mass-lift capability, payload volume, and C3, SLS not only enables spacecraft or mission designs currently impossible with contemporary EELVs, it also offers enhancing benefits, such as reduced risk, operational costs and/or complexity, shorter transit time to destination or launching large systems either monolithically or in fewer components. This paper will discuss both the performance and capabilities of Space Launch System as it evolves, and the current state of SLS utilization planning.

  4. Capabilities of the RENEB network for research and large scale radiological and nuclear emergency situations

    OpenAIRE

    Monteiro Gil, Octávia; Vaz, Pedro; Romm, Horst; De Angelis, Cinzia; Antunes, Ana Catarina; Barquinero, Joan-Francesc; Beinke, Christina; Bortolin, Emanuela; Burbidge, Christopher Ian; Cucu, Alexandra; Della Monaca, Sara; Moreno Domene, Mercedes; Fattibene, Paola; Gregoire, Eric; Hadjidekova, Valeria

    2017-01-01

    Purpose: To identify and assess, among the participants in the RENEB (Realizing the European Network of Biodosimetry) project, the emergency preparedness, response capabilities and resources that can be deployed in the event of a radiological or nuclear accident/incident affecting a large number of individuals. These capabilities include available biodosimetry techniques, infrastructure, human resources (existing trained staff), financial and organizational resources (including the role of na...

  5. Materials and fractal designs for 3D multifunctional integumentary membranes with capabilities in cardiac electrotherapy.

    Science.gov (United States)

    Xu, Lizhi; Gutbrod, Sarah R; Ma, Yinji; Petrossians, Artin; Liu, Yuhao; Webb, R Chad; Fan, Jonathan A; Yang, Zijian; Xu, Renxiao; Whalen, John J; Weiland, James D; Huang, Yonggang; Efimov, Igor R; Rogers, John A

    2015-03-11

    Advanced materials and fractal design concepts form the basis of a 3D conformal electronic platform with unique capabilities in cardiac electrotherapies. Fractal geometries, advanced electrode materials, and thin, elastomeric membranes yield a class of device capable of integration with the entire 3D surface of the heart, with unique operational capabilities in low power defibrillation. Co-integrated collections of sensors allow simultaneous monitoring of physiological responses. Animal experiments on Langendorff-perfused rabbit hearts demonstrate the key features of these systems. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Numerical modeling capabilities to predict repository performance

    Energy Technology Data Exchange (ETDEWEB)

    1979-09-01

    This report presents a summary of current numerical modeling capabilities that are applicable to the design and performance evaluation of underground repositories for the storage of nuclear waste. The report includes codes that are available in-house, within Golder Associates and Lawrence Livermore Laboratories; as well as those that are generally available within the industry and universities. The first listing of programs are in-house codes in the subject areas of hydrology, solute transport, thermal and mechanical stress analysis, and structural geology. The second listing of programs are divided by subject into the following categories: site selection, structural geology, mine structural design, mine ventilation, hydrology, and mine design/construction/operation. These programs are not specifically designed for use in the design and evaluation of an underground repository for nuclear waste; but several or most of them may be so used.

  7. Turbine vane with high temperature capable skins

    Energy Technology Data Exchange (ETDEWEB)

    Morrison, Jay A [Oviedo, FL

    2012-07-10

    A turbine vane assembly includes an airfoil extending between an inner shroud and an outer shroud. The airfoil can include a substructure having an outer peripheral surface. At least a portion of the outer peripheral surface is covered by an external skin. The external skin can be made of a high temperature capable material, such as oxide dispersion strengthened alloys, intermetallic alloys, ceramic matrix composites or refractory alloys. The external skin can be formed, and the airfoil can be subsequently bi-cast around or onto the skin. The skin and the substructure can be attached by a plurality of attachment members extending between the skin and the substructure. The skin can be spaced from the outer peripheral surface of the substructure such that a cavity is formed therebetween. Coolant can be supplied to the cavity. Skins can also be applied to the gas path faces of the inner and outer shrouds.

  8. NASA Biomedical Informatics Capabilities and Needs

    Science.gov (United States)

    Johnson-Throop, Kathy A.

    2009-01-01

    To improve on-orbit clinical capabilities by developing and providing operational support for intelligent, robust, reliable, and secure, enterprise-wide and comprehensive health care and biomedical informatics systems with increasing levels of autonomy, for use on Earth, low Earth orbit & exploration class missions. Biomedical Informatics is an emerging discipline that has been defined as the study, invention, and implementation of structures and algorithms to improve communication, understanding and management of medical information. The end objective of biomedical informatics is the coalescing of data, knowledge, and the tools necessary to apply that data and knowledge in the decision-making process, at the time and place that a decision needs to be made.

  9. IAC-1.5 - INTEGRATED ANALYSIS CAPABILITY

    Science.gov (United States)

    Vos, R. G.

    1994-01-01

    The objective of the Integrated Analysis Capability (IAC) system is to provide a highly effective, interactive analysis tool for the integrated design of large structures. IAC was developed to interface programs from the fields of structures, thermodynamics, controls, and system dynamics with an executive system and a database to yield a highly efficient multi-disciplinary system. Special attention is given to user requirements such as data handling and on-line assistance with operational features, and the ability to add new modules of the user's choice at a future date. IAC contains an executive system, a database, general utilities, interfaces to various engineering programs, and a framework for building interfaces to other programs. IAC has shown itself to be effective in automating data transfer among analysis programs. The IAC system architecture is modular in design. 1) The executive module contains an input command processor, an extensive data management system, and driver code to execute the application modules. 2) Technical modules provide standalone computational capability as well as support for various solution paths or coupled analyses. 3) Graphics and model generation modules are supplied for building and viewing models. 4) Interface modules provide for the required data flow between IAC and other modules. 5) User modules can be arbitrary executable programs or JCL procedures with no pre-defined relationship to IAC. 6) Special purpose modules are included, such as MIMIC (Model Integration via Mesh Interpolation Coefficients), which transforms field values from one model to another; LINK, which simplifies incorporation of user specific modules into IAC modules; and DATAPAC, the National Bureau of Standards statistical analysis package. The IAC database contains structured files which provide a common basis for communication between modules and the executive system, and can contain unstructured files such as NASTRAN checkpoint files, DISCOS plot files

  10. Capability enhancement in compact digital holographic microscopy

    Science.gov (United States)

    Qu, Weijuan; Wen, Yongfu; Wang, Zhaomin; Yang, Fang; Asundi, Anand

    2015-03-01

    A compact reflection digital holographic microscopy (DHM) system integrated with the light source and optical interferometer is developed for 3D topographic characterization and real-time dynamic inspection for Microelectromechanical systems (MEMS). Capability enhancement methods in lateral resolution, axial resolving range and large field of view for the compact DHM system are presented. To enhance the lateral resolution, the numerical aperture of a reflection DHM system is analyzed and optimum designed. To enhance the axial resolving range, dual wavelengths are used to extend the measuring range. To enable the large field of view, stitching of the measurement results is developed in the user-friendly software. Results from surfaces structures on silicon wafer, micro-optics on fused silica and dynamic inspection of MEMS structures demonstrate applications of this compact reflection digital holographic microscope for technical inspection in material science.

  11. Sources of capabilities, integration and technology commercialization

    DEFF Research Database (Denmark)

    Zahra, Shaker A.; Nielsen, Anders

    2002-01-01

    of internal and external sources on multiple dimensions of successful technology commercialization (TC). The study also explores the moderating role of formal vs. informal integration mechanisms on these relationships. Applying a longitudinal design and data from 119 companies, the results show that internal...... human and technology-based manufacturing sources are positively associated with successful TC. Formal and informal integration mechanisms also significantly moderate the relationships observed between capability sources and TC. Copyright (C) 2002 John Wiley Sons, Ltd.......In recent years, companies have increased their use of internal and external sources in pursuit of a competitive advantage through the effective and timely commercialization of new technology. Grounded in the resource-based view of the firm, this study examines the effect of a company's use...

  12. Intelsat VII communications capabilities and performance

    Science.gov (United States)

    Abdel-Nabi, T.; Koh, E.; Kennedy, D.

    This paper describes the general characteristics of the Intelsat VII communications payload and analyzes the suitability of its design for digital transmission, for efficient incorporation of small earth stations into the Intelsat network, and for a relatively straightforward transition from the current Intelsat VA/VI configuration. An overview is presented of the comunications performance of the Intelsat VII satellite for the more important Intelsat digital and analog services, and earth stations standards. Specifically, the advantages, in terms of performance and capabilities, of the improved transponder linearity characteristics associated with the C-Band SSPA's and the K(u)-Band linearized TWTA's are addressed. The enhanced ability of this spacecraft to provide bandwidth where required from several possible orbital locations is discussed.

  13. Terahertz Plasmonic Structure With Enhanced Sensing Capabilities

    DEFF Research Database (Denmark)

    Yahiaoui, Riad; Strikwerda, Andrew C.; Jepsen, Peter Uhd

    2016-01-01

    We have designed, fabricated, and experimentally verified a highly sensitive plasmonic sensing device in the terahertz frequency range. For a proof of concept of the sensing phenomenon, we have chosen the so-called fishnet structure based on circular hole array insensitive to the polarization...... of the incident wave. We employ the localized resonance associated with the cutoff frequency (electric plasma frequency) of the hole array to investigate its sensing capability. A thin-film overlayer deposited on the surface of the metallic apertures causes an amplitude modulation and a shift in the resonant...... frequency of the terahertz transmission. The frequency shift and the amplitude modulation were investigated as a function of the refractive index and the thickness of the overlayer for determining the sensing potential of the proposed structure. Measurements carried out using terahertz time...

  14. A database management capability for Ada

    Science.gov (United States)

    Chan, Arvola; Danberg, SY; Fox, Stephen; Landers, Terry; Nori, Anil; Smith, John M.

    1986-01-01

    The data requirements of mission critical defense systems have been increasing dramatically. Command and control, intelligence, logistics, and even weapons systems are being required to integrate, process, and share ever increasing volumes of information. To meet this need, systems are now being specified that incorporate data base management subsystems for handling storage and retrieval of information. It is expected that a large number of the next generation of mission critical systems will contain embedded data base management systems. Since the use of Ada has been mandated for most of these systems, it is important to address the issues of providing data base management capabilities that can be closely coupled with Ada. A comprehensive distributed data base management project has been investigated. The key deliverables of this project are three closely related prototype systems implemented in Ada. These three systems are discussed.

  15. The NICER mission: Status and technical capabilities

    Science.gov (United States)

    Chakrabarty, Deepto; Arzoumanian, Zaven; Gendreau, Keith

    2016-07-01

    NASA's Neutron Star Interior Composition Explorer (NICER), in development for deployment to the International Space Station as an external attached payload, will address decades-old questions about the structure, dynamics, and energetics of neutron stars through high-precision timing of the soft X-ray emissions of rotation- and accretion-powered pulsars. NICER's performance in timing, spectroscopy, and high-throughput sensitivity to 0.2-12 keV X-rays represents a substantial enhancement over existing capabilities, enabling a rich diversity of investigations in both neutron star science as well as broader X-ray astrophysics, the latter through an approved Guest Observer program. This talk briefly summarizes the NICER design and the status of hardware fabrication and testing, currently on pace to deliver the NICER payload for its planned launch in early 2017.

  16. Overview of ASC Capability Computing System Governance Model

    Energy Technology Data Exchange (ETDEWEB)

    Doebling, Scott W. [Los Alamos National Laboratory

    2012-07-11

    This document contains a description of the Advanced Simulation and Computing Program's Capability Computing System Governance Model. Objectives of the Governance Model are to ensure that the capability system resources are allocated on a priority-driven basis according to the Program requirements; and to utilize ASC Capability Systems for the large capability jobs for which they were designed and procured.

  17. Capability and Happiness: Conceptual difference and reality links

    NARCIS (Netherlands)

    R. Veenhoven (Ruut)

    2010-01-01

    textabstractAbstract Happiness is not the same as capability, but the matters are related. Capability is obviously required for living a happy life and happiness feeds back on capability in several ways. Capabilities affect happiness not only at the individual level, but also indirectly at the

  18. CAPABILITY ASSESSMENT OF MEASURING EQUIPMENT USING STATISTIC METHOD

    Directory of Open Access Journals (Sweden)

    Pavel POLÁK

    2014-10-01

    Full Text Available Capability assessment of the measurement device is one of the methods of process quality control. Only in case the measurement device is capable, the capability of the measurement and consequently production process can be assessed. This paper deals with assessment of the capability of the measuring device using indices Cg and Cgk.

  19. A Human Capabilities Framework for Evaluating Student Learning

    Science.gov (United States)

    Walker, Melanie

    2008-01-01

    This paper proposes a human capabilities approach for evaluating student learning and the social and pedagogical arrangements that support equality in capabilities for all students. It outlines the focus on valuable beings and doings in the capability approach developed by Amartya Sen, and Martha Nussbaum's capabilities focus on human flourishing.…

  20. Nuclear Data Needs and Capabilities for Applications

    Energy Technology Data Exchange (ETDEWEB)

    Brown, D. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2015-05-27

    In July 2014, DOE NP carried out a review of the US Nuclear Data Program. This led to several recommendations, including that the USNDP should “devise effective and transparent mechanisms to solicit input and feedback from all stakeholders on nuclear data needs and priorities.” The review also recommended that USNDP pursue experimental activities of relevance to nuclear data; the revised 2014 Mission Statement accordingly states that the USNDP uses “targeted experimental studies” to address gaps in nuclear data. In support of these recommendations, DOE NP requested that USNDP personnel organize a Workshop on Nuclear Data Needs and Capabilities for Applications (NDNCA). This Workshop was held at Lawrence Berkeley National Laboratory (LBNL) on 27-29 May 2015. The goal of the NDNCA Workshop was to compile nuclear data needs across a wide spectrum of applied nuclear science, and to provide a summary of associated capabilities (accelerators, reactors, spectrometers, etc.) available for the required measurements. The first two days of the workshop consisted of 25 plenary talks by speakers from 16 different institutions, on nuclear energy (NE), national security (NS), isotope production (IP), and industrial applications (IA). There were also shorter “capabilities” talks that described the experimental facilities and instrumentation available for the measurement of nuclear data. This was followed by a third day of topic-specific “breakout” sessions and a final closeout session. The agenda and copies of these talks are available online at http://bang.berkeley.edu/events/NDNCA/agenda. The importance of nuclear data to both basic and applied nuclear science was reflected in the fact that while the impetus for the workshop arose from the 2014 USNDP review, joint sponsorship for the workshop was provided by the Nuclear Science and Security Consortium, a UC-Berkeley based organization funded by the National Nuclear Security Administration (NNSA).

  1. RELAP-7 Beta Release: Summary of Capabilities

    Energy Technology Data Exchange (ETDEWEB)

    Martineau, Richard C. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Zhang, Hongbin [Idaho National Lab. (INL), Idaho Falls, ID (United States); Zhao, Haihua [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-12-01

    RELAP-7 is a nuclear systems safety analysis code being developed at the Idaho National Laboratory (INL). Building upon the decades of software development at the INL, we began the development of RELAP-7 in 2011 to support the Risk Informed Safety Margins Characterization (RISMC) Pathway. As part of this development, the first lines of RELAP-7 code were committed to the software revision control repository on November 7th, 2011. The overall design goal of RELAP-7 is to take advantage of the previous thirty years of advancements in computer architecture, software design, numerical methods, and physical models in order to provide capabilities needed for the RISMC methodology and to support nuclear power safety analysis. RELAP-7 is built using the INL’s modern scientific software development framework, MOOSE (Multi-physics Object Oriented Simulation Environment). MOOSE provides improved numerical calculations (including higher-order integration in both space and time, yielding converged second-order accuracy). The RELAP-7 code structure is based on multiple physical component models such as pipes, junctions, pumps, etc. Each component can have options for different fluid models such as single- and two-phase flow. This component-based and physics-based software architecture allows RELAP-7 to adopt different physical models for different applications. A relatively new two-phase hydrodynamic model, termed the ''7-Equation model'' for two phasic pressures, velocities, energies, and volumetric fraction, is incorporated into RELAP-7 for liquid-gas (water-steam) flows. This new model allows second-order integration because it is well-posed, which will reduce the numerical error associated with traditional systems analysis codes. In this paper, we provide a RELAP-7 capability list describing analysis features, range of applicability, and reactor components that will be available for the December 15th, 2014 beta release of the software.

  2. Research on regional capability constructive models of cleat development mechanism

    Institute of Scientific and Technical Information of China (English)

    Chen Leishan; Liu Qingqiang; Geng Jie; Lu Genfa

    2009-01-01

    Global climate change has been identified as the ftrst of the top ten environmental problems in the world,As climate change will have serious effects on the social and economic development and everyday living of people in the world,many of the countries and governments are taking untiring efforts to combat climate change.As one of the important mechanisms of reducing greenhouse gas (GHG) emissions in the Kyoto Protocol,Clean DevelopmentMechanism (CDM) has not only provided chance.for developed countries to ftdfill greenhouse emission reduction obligations,but also provided an opportunity for developing countries to combat climate change under the sustainabledevelopment frame.The dual objectives of developed countries' GHG emissions' reduction obligation achievement and developing countries'sustainable development will be achieved under the CDM.As a country with responsibility,China has been positively developing CDM projects and promoting energy saving and emissions reduction during the three years after the Kyoto Protocol came into force,and CDM projects development has always been in the front tank in the world However,as the vast clime within China,notable differences occur in different regions.In order to promote the CDM development in China,it is necessary to have regional CDM capability construction in accor dance with the practicality in different regions.Based on the Slat Analysis of developed CDM projects and current CDM development status in China,problems in the CDM development of China,including the inefficiency in sinall and medium-sized CDM Projects development,over centralization of CDM development scope and especially the differentiated provincial CDM projects developing capability are pointed out in the paper.What's more,reasons forthe problems are analyzed from the leading factors,including policy orient,information asymmetry and weak CDMcapability.In order to promote CDM projects development in China,a new CDM capability construction model is put

  3. Rate Capability in Bakelite Based Resistive Plate Chambers

    Science.gov (United States)

    Candocia, Max

    2011-10-01

    Bakelite-based resistive plate chambers (RPCs) are particle detectors commonly used in muon trigger systems for high-energy physics experiments. Bakelite RPCs combine fast response, sufficient position resolution and low cost, and they can be operated at instantaneous background rates up to about 1.5 kHz/cm2. Current and future collider experiments will demand operation of trigger RPCs under background rates higher than what is currently achieved. The rate capability is related to the bulk and surface conductivities of the Bakelite material used for the plates bordering the active gas volume in the RPCs. The inner surface of present Bakelite RPCs used at the LHC and RHIC is coated with linseed oil, lowering the surface resistivity of the raw Bakelite. Methods of increasing the surface conductivity of Bakelite sheets via dispersion of carbon blacks in linseed oil are being developed. Performance tests of prototype RPCs are carried out in a test stand that utilizes cosmic ray muons and radioactive 55Fe sources. In this presentation different dispersion methods and the rate capability of the resulting prototype RPCs will be compared.

  4. Overview of NASA MSFC IEC Federated Engineering Collaboration Capability

    Science.gov (United States)

    Moushon, Brian; McDuffee, Patrick

    2005-01-01

    The MSFC IEC federated engineering framework is currently developing a single collaborative engineering framework across independent NASA centers. The federated approach allows NASA centers the ability to maintain diversity and uniqueness, while providing interoperability. These systems are integrated together in a federated framework without compromising individual center capabilities. MSFC IEC's Federation Framework will have a direct affect on how engineering data is managed across the Agency. The approach is directly attributed in response to the Columbia Accident Investigation Board (CAB) finding F7.4-11 which states the Space Shuttle Program has a wealth of data sucked away in multiple databases without a convenient way to integrate and use the data for management, engineering, or safety decisions. IEC s federated capability is further supported by OneNASA recommendation 6 that identifies the need to enhance cross-Agency collaboration by putting in place common engineering and collaborative tools and databases, processes, and knowledge-sharing structures. MSFC's IEC Federated Framework is loosely connected to other engineering applications that can provide users with the integration needed to achieve an Agency view of the entire product definition and development process, while allowing work to be distributed across NASA Centers and contractors. The IEC DDMS federation framework eliminates the need to develop a single, enterprise-wide data model, where the goal of having a common data model shared between NASA centers and contractors is very difficult to achieve.

  5. Biodegradable and radically polymerized elastomers with enhanced processing capabilities.

    Science.gov (United States)

    Ifkovits, Jamie L; Padera, Robert F; Burdick, Jason A

    2008-09-01

    The development of biodegradable materials with elastomeric properties is beneficial for a variety of applications, including for use in the engineering of soft tissues. Although others have developed biodegradable elastomers, they are restricted by their processing at high temperatures and under vacuum, which limits their fabrication into complex scaffolds. To overcome this, we have modified precursors to a tough biodegradable elastomer, poly(glycerol sebacate) (PGS) with acrylates to impart control over the crosslinking process and allow for more processing options. The acrylated-PGS (Acr-PGS) macromers are capable of crosslinking through free radical initiation mechanisms (e.g., redox and photo-initiated polymerizations). Alterations in the molecular weight and % acrylation of the Acr-PGS led to changes in formed network mechanical properties. In general, Young's modulus increased with % acrylation and the % strain at break increased with molecular weight when the % acrylation was held constant. Based on the mechanical properties, one macromer was further investigated for in vitro and in vivo degradation and biocompatibility. A mild to moderate inflammatory response typical of implantable biodegradable polymers was observed, even when formed as an injectable system with redox initiation. Moreover, fibrous scaffolds of Acr-PGS and a carrier polymer, poly(ethylene oxide), were prepared via an electrospinning and photopolymerization technique and the fiber morphology was dependent on the ratio of these components. This system provides biodegradable polymers with tunable properties and enhanced processing capabilities towards the advancement of approaches in engineering soft tissues.

  6. Overview of NASA MSFC IEC Federated Engineering Collaboration Capability

    Science.gov (United States)

    Moushon, Brian; McDuffee, Patrick

    2005-01-01

    The MSFC IEC federated engineering framework is currently developing a single collaborative engineering framework across independent NASA centers. The federated approach allows NASA centers the ability to maintain diversity and uniqueness, while providing interoperability. These systems are integrated together in a federated framework without compromising individual center capabilities. MSFC IEC's Federation Framework will have a direct affect on how engineering data is managed across the Agency. The approach is directly attributed in response to the Columbia Accident Investigation Board (CAB) finding F7.4-11 which states the Space Shuttle Program has a wealth of data sucked away in multiple databases without a convenient way to integrate and use the data for management, engineering, or safety decisions. IEC s federated capability is further supported by OneNASA recommendation 6 that identifies the need to enhance cross-Agency collaboration by putting in place common engineering and collaborative tools and databases, processes, and knowledge-sharing structures. MSFC's IEC Federated Framework is loosely connected to other engineering applications that can provide users with the integration needed to achieve an Agency view of the entire product definition and development process, while allowing work to be distributed across NASA Centers and contractors. The IEC DDMS federation framework eliminates the need to develop a single, enterprise-wide data model, where the goal of having a common data model shared between NASA centers and contractors is very difficult to achieve.

  7. Enhancing Business Performance through Learning Organization and Knowledge Sharing Capability: the Mediating Effect of Innovation Capability using PLS Method

    OpenAIRE

    Niko Fanbasten

    2014-01-01

    This research aims to analyze descriptive condition of Learning Organization, Knowledge Sharing Capability, Innovation Capability, and Business Performance perceived by employees at PT SIT GLOBAL SYSTEMS, an IT consultant company. Besides, research is to analyze influence of Learning Organization and Knowledge Sharing Capability (exogenous variables) on Innovation Capability and Business Performance (endogenous variables) in the company. This research used descriptive statistics and associati...

  8. Individual discrimination capability and collective decision-making.

    Science.gov (United States)

    Millor, J; Amé, J M; Halloy, J; Deneubourg, J L

    2006-04-01

    Amplification is the main component of many collective phenomena in social and gregarious insects. In a society, individuals face a mixed palette of odours coming from different groups (lines, strains) and individuals present discrimination capabilities. However, often at the collective level, different groups may cooperate and act together. To understand this apparent contradiction, we use a model of food recruitment where each group of foragers have its own blend of pheromone trail that is partly recognized by the others groups. The model shows that a low level of recognition between signals is sufficient to produce a collaborative pattern between groups and that beyond a critical value of recognition, only the aggregation of all the groups around the same food source is observed. The comparison between this model and one describing the site selection by gregarious insects (e.g. cockroach) suggests that such collective response is a generic property of social phenomena governed by amplification processes.

  9. Competence Utilization for Innovation Capabilities - A Question of Trust?

    Directory of Open Access Journals (Sweden)

    Britta BOLZERN-KONRAD

    2015-05-01

    Full Text Available The purpose of this paper is to show how trust as an organizational value contributes to employee competence utilization in the case of innovation capability. Thus, it is the objective of this paper to analyze the positive impacts, but also potential limits of trust in business management. The research paper uses two different quantitative empirical studies drawn from German and Austrian mid-sized companies to empirically test this interrelation. As a result, the paper determines particular aspects of trust such as accountability, shared norms and the ability to take responsibility to be interrelated with the usage of employee competences and underlines a positive connection between product innovation performance and trust. However, the trust concept needs enriching elements to be balanced towards a feeling of mutual reliance and support creativity instead; inclusions of bridging social capital, elements of distrust and a pioneering spirit are to be mentioned here.

  10. A Roadmap for NEAMS Capability Transfer

    Energy Technology Data Exchange (ETDEWEB)

    Bernholdt, David E [ORNL

    2011-11-01

    The vision of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program is to bring truly predictive modeling and simulation (M&S) capabilities to the nuclear engineering community in order to enable a new approach to the design and analysis of nuclear energy systems. From its inception, the NEAMS program has always envisioned a broad user base for its software and scientific products, including researchers within the DOE complex, nuclear industry technology developers and vendors, and operators. However activities to date have focused almost exclusively on interactions with NEAMS sponsors, who are also near-term users of NEAMS technologies. The task of the NEAMS Capability Transfer (CT) program element for FY2011 is to develop a comprehensive plan to support the program's needs for user outreach and technology transfer. In order to obtain community input to this plan, a 'NEAMS Capability Transfer Roadmapping Workshop' was held 4-5 April 2011 in Chattanooga, TN, and is summarized in this report. The 30 workshop participants represented the NEAMS program, the DOE and industrial user communities, and several outside programs. The workshop included a series of presentations providing an overview of the NEAMS program and presentations on the user outreach and technology transfer experiences of (1) The Advanced Simulation and Computing (ASC) program, (2) The Standardized Computer Analysis for Licensing Evaluation (SCALE) project, and (3) The Consortium for Advanced Simulation of Light Water Reactors (CASL), followed by discussion sessions. Based on the workshop and other discussions throughout the year, we make a number of recommendations of key areas for the NEAMS program to develop the user outreach and technology transfer activities: (1) Engage not only DOE, but also industrial users sooner and more often; (2) Engage with the Nuclear Regulatory Commission to facilitate their understanding and acceptance of NEAMS approach to predictive M&S; (3

  11. LANL capabilities towards bioenergy and biofuels programs

    Energy Technology Data Exchange (ETDEWEB)

    Olivares, Jose A [Los Alamos National Laboratory; Park, Min S [Los Alamos National Laboratory; Unkefer, Clifford J [Los Alamos National Laboratory; Bradbury, Andrew M [Los Alamos National Laboratory; Waldo, Geoffrey S [Los Alamos National Laboratory

    2009-01-01

    LANL invented technology for increasing growth and productivity of photosysnthetic organisms, including algae and higher plants. The technology has been extensively tested at the greenhouse and field scale for crop plants. Initial bioreactor testing of its efficacy on algal growth has shown promising results. It increases algal growth rates even under optimwn nutrient supply and careful pH control with CO{sub 2} continuously available. The technology uses a small organic molecule, applied to the plant surfaces or added to the algal growth medium. CO{sub 2} concentration is necessary to optimize algal production in either ponds or reactors. LANL has successfully designed, built and demonstrated an effective, efficient technology using DOE funding. Such a system would be very valuable for capitalizing on local inexpensive sources of CO{sub 2} for algal production operations. Furthermore, our protein engineering team has a concept to produce highly stable carbonic anhydyrase (CA) enzyme, which could be very useful to assure maximum utilization of the CO{sub 2} supply. Stable CA could be used either imnlobilized on solid supports or engineered into the algal strain. The current technologies for harvesting the algae and obtaining the lipids do not meet the needs for rapid, low cost separations for high volumes of material. LANL has obtained proof of concept for the high volume flowing stream concentration of algae, algal lysis and separation of the lipid, protein and water fractions, using acoustic platforms. This capability is targeted toward developing biosynthetics, chiral syntheses, high throughput protein expression and purification, organic chemistry, recognition ligands, and stable isotopes geared toward Bioenergy applications. Areas of expertise include stable isotope chemistry, biomaterials, polymers, biopolymers, organocatalysis, advanced characterization methods, and chemistry of model compounds. The ultimate realization of the ability to design and

  12. Precision Departure Release Capability (PDRC) Technology Description

    Science.gov (United States)

    Engelland, Shawn A.; Capps, Richard; Day, Kevin; Robinson, Corissia; Null, Jody R.

    2013-01-01

    After takeoff, aircraft must merge into en route (Center) airspace traffic flows which may be subject to constraints that create localized demand-capacity imbalances. When demand exceeds capacity, Traffic Management Coordinators (TMCs) often use tactical departure scheduling to manage the flow of departures into the constrained Center traffic flow. Tactical departure scheduling usually involves use of a Call for Release (CFR) procedure wherein the Tower must call the Center TMC to coordinate a release time prior to allowing the flight to depart. In present-day operations release times are computed by the Center Traffic Management Advisor (TMA) decision support tool based upon manual estimates of aircraft ready time verbally communicated from the Tower to the Center. The TMA-computed release is verbally communicated from the Center back to the Tower where it is relayed to the Local controller as a release window that is typically three minutes wide. The Local controller will manage the departure to meet the coordinated release time window. Manual ready time prediction and verbal release time coordination are labor intensive and prone to inaccuracy. Also, use of release time windows adds uncertainty to the tactical departure process. Analysis of more than one million flights from January 2011 indicates that a significant number of tactically scheduled aircraft missed their en route slot due to ready time prediction uncertainty. Uncertainty in ready time estimates may result in missed opportunities to merge into constrained en route flows and lead to lost throughput. Next Generation Air Transportation System (NextGen) plans call for development of Tower automation systems capable of computing surface trajectory-based ready time estimates. NASA has developed the Precision Departure Release Capability (PDRC) concept that uses this technology to improve tactical departure scheduling by automatically communicating surface trajectory-based ready time predictions to the

  13. Precision Departure Release Capability (PDRC) Final Report

    Science.gov (United States)

    Engelland, Shawn A.; Capps, Richard; Day, Kevin Brian; Kistler, Matthew Stephen; Gaither, Frank; Juro, Greg

    2013-01-01

    After takeoff, aircraft must merge into en route (Center) airspace traffic flows that may be subject to constraints that create localized demand/capacity imbalances. When demand exceeds capacity, Traffic Management Coordinators (TMCs) and Frontline Managers (FLMs) often use tactical departure scheduling to manage the flow of departures into the constrained Center traffic flow. Tactical departure scheduling usually involves a Call for Release (CFR) procedure wherein the Tower must call the Center to coordinate a release time prior to allowing the flight to depart. In present-day operations release times are computed by the Center Traffic Management Advisor (TMA) decision support tool, based upon manual estimates of aircraft ready time verbally communicated from the Tower to the Center. The TMA-computed release time is verbally communicated from the Center back to the Tower where it is relayed to the Local controller as a release window that is typically three minutes wide. The Local controller will manage the departure to meet the coordinated release time window. Manual ready time prediction and verbal release time coordination are labor intensive and prone to inaccuracy. Also, use of release time windows adds uncertainty to the tactical departure process. Analysis of more than one million flights from January 2011 indicates that a significant number of tactically scheduled aircraft missed their en route slot due to ready time prediction uncertainty. Uncertainty in ready time estimates may result in missed opportunities to merge into constrained en route flows and lead to lost throughput. Next Generation Air Transportation System plans call for development of Tower automation systems capable of computing surface trajectory-based ready time estimates. NASA has developed the Precision Departure Release Capability (PDRC) concept that improves tactical departure scheduling by automatically communicating surface trajectory-based ready time predictions and departure

  14. Disability, Capability, and Special Education: Towards a Capability-Based Theory

    Science.gov (United States)

    Reindal, Solveig Magnus

    2009-01-01

    The main objective of the article was to investigate the claim that the capability approach fares better with an understanding of disability as presented by the World Health Organization's "International Classification of Functioning, Disability and Health" (ICF) than by the social model, which has been promoted within disability studies. Scholars…

  15. Disability, Capability, and Special Education: Towards a Capability-Based Theory

    Science.gov (United States)

    Reindal, Solveig Magnus

    2009-01-01

    The main objective of the article was to investigate the claim that the capability approach fares better with an understanding of disability as presented by the World Health Organization's "International Classification of Functioning, Disability and Health" (ICF) than by the social model, which has been promoted within disability studies. Scholars…

  16. Science capabilities of the Maunakea Spectroscopic Explorer

    Science.gov (United States)

    Devost, Daniel; McConnachie, Alan; Flagey, Nicolas; Cote, Patrick; Balogh, Michael; Driver, Simon P.; Venn, Kim

    2017-01-01

    The Maunakea Spectroscopic Explorer (MSE) project will transform the CFHT 3.6m optical telescope into a 10m class dedicated multiobject spectroscopic facility, with an ability to simultaneously measure thousands of objects with a spectral resolution range spanning 2,000 to 20,000. The project is currently in design phase, with full science operations nominally starting in 2025. MSE will enable transformational science in areas as diverse as exoplanetary host characterization; stellar monitoring campaigns; tomographic mapping of the interstellar and intergalactic media; the in-situ chemical tagging of the distant Galaxy; connecting galaxies to the large scale structure of the Universe; measuring the mass functions of cold dark matter sub-halos in galaxy and cluster-scale hosts; reverberation mapping of supermassive black holes in quasars. MSE is an essential follow-up facility to current and next generations of multi-wavelength imaging surveys, including LSST, Gaia, Euclid, eROSITA, SKA, and WFIRST, and is an ideal feeder facility for E-ELT, TMT and GMT. I will give an update on the status of the project and review some of the most exciting scientific capabilities of the observatory.

  17. High-Rate Capable Floating Strip Micromegas

    CERN Document Server

    Bortfeldt, Jonathan; Biebel, Otmar; Danger, Helge; Flierl, Bernhard; Hertenberger, Ralf; Lösel, Philipp; Moll, Samuel; Parodi, Katia; Rinaldi, Ilaria; Ruschke, Alexander; Zibell, André

    2015-01-01

    We report on the optimization of discharge insensitive floating strip Micromegas (MICRO-MEsh GASeous) detectors, fit for use in high-energy muon spectrometers. The suitability of these detectors for particle tracking is shown in high-background environments and at very high particle fluxes up to 60MHz/cm$^2$. Measurement and simulation of the microscopic discharge behavior have demonstrated the excellent discharge tolerance. A floating strip Micromegas with an active area of 48cm$\\times$50cm with 1920 copper anode strips exhibits in 120GeV pion beams a spatial resolution of 50$\\mu$m at detection efficiencies above 95%. Pulse height, spatial resolution and detection efficiency are homogeneous over the detector. Reconstruction of particle track inclination in a single detector plane is discussed, optimum angular resolutions below $5^\\circ$ are observed. Systematic deviations of this $\\mu$TPC-method are fully understood. The reconstruction capabilities for minimum ionizing muons are investigated in a 6.4cm$\\time...

  18. Extending particle tracking capability with Delaunay triangulation.

    Science.gov (United States)

    Chen, Kejia; Anthony, Stephen M; Granick, Steve

    2014-04-29

    Particle tracking, the analysis of individual moving elements in time series of microscopic images, enables burgeoning new applications, but there is need to better resolve conformation and dynamics. Here we describe the advantages of Delaunay triangulation to extend the capabilities of particle tracking in three areas: (1) discriminating irregularly shaped objects, which allows one to track items other than point features; (2) combining time and space to better connect missing frames in trajectories; and (3) identifying shape backbone. To demonstrate the method, specific examples are given, involving analyzing the time-dependent molecular conformations of actin filaments and λ-DNA. The main limitation of this method, shared by all other clustering techniques, is the difficulty to separate objects when they are very close. This can be mitigated by inspecting locally to remove edges that are longer than their neighbors and also edges that link two objects, using methods described here, so that the combination of Delaunay triangulation with edge removal can be robustly applied to processing large data sets. As common software packages, both commercial and open source, can construct Delaunay triangulation on command, the methods described in this paper are both computationally efficient and easy to implement.

  19. Capabilities of nitrogen admixed cryogenic deuterium pellets

    Energy Technology Data Exchange (ETDEWEB)

    Sharov, Igor; Sergeev, Vladimir [SPU, Saint-Petersburg (Russian Federation); Lang, Peter; Ploeckl, Bernhard; Cavedon, Marco [Max-Planck-Institut fuer Plasmaphysik, Garching (Germany); Kocsis, Gabor; Szepesi, Tamas [Wigner RCP RMI, Budapest (Hungary); Collaboration: ASDEX Upgrade Team

    2015-05-01

    Operation at high core density with high energy confinement - as foreseen in a future fusion reactor like DEMO - is being investigated at ASDEX Upgrade tokamak. The efficiency of pellet fuelling from the high-field side usually increases with increasing injection speed. Due to the fragile nature of the deuterium ice, however, the increment of pellet mass losses and subsequent pellet fragmentations take place when the speed is increased. Studies show, that admixing of a small amount of nitrogen (N{sub 2}) into D{sub 2} gas can be favorable for the mechanical stability of pellets. This might be helpful for deeper pellet penetration. Besides, seeding by N{sub 2} can enhance plasma performance due to both increasing the energy confinement time and reducing the divertor heat load in the envisaged ELMy H-mode plasma scenario. Fuelling efficiency of N{sub 2}-admixed solid D{sub 2} pellets and their nitrogen seeding capabilities were investigated. It was found that both the overall plasma density increase and the measured averaged pellet penetration depth were smaller in case of the admixed (1% mol. in the gas resulting in about 0.8% in the ice) pellet fuelling. Possibility of the N{sub 2}-seeding by admixed pellets was confirmed by CXRS measurements of N{sup 7+} content in plasma.

  20. Development of covariance capabilities in EMPIRE code

    Energy Technology Data Exchange (ETDEWEB)

    Herman,M.; Pigni, M.T.; Oblozinsky, P.; Mughabghab, S.F.; Mattoon, C.M.; Capote, R.; Cho, Young-Sik; Trkov, A.

    2008-06-24

    The nuclear reaction code EMPIRE has been extended to provide evaluation capabilities for neutron cross section covariances in the thermal, resolved resonance, unresolved resonance and fast neutron regions. The Atlas of Neutron Resonances by Mughabghab is used as a primary source of information on uncertainties at low energies. Care is taken to ensure consistency among the resonance parameter uncertainties and those for thermal cross sections. The resulting resonance parameter covariances are formatted in the ENDF-6 File 32. In the fast neutron range our methodology is based on model calculations with the code EMPIRE combined with experimental data through several available approaches. The model-based covariances can be obtained using deterministic (Kalman) or stochastic (Monte Carlo) propagation of model parameter uncertainties. We show that these two procedures yield comparable results. The Kalman filter and/or the generalized least square fitting procedures are employed to incorporate experimental information. We compare the two approaches analyzing results for the major reaction channels on {sup 89}Y. We also discuss a long-standing issue of unreasonably low uncertainties and link it to the rigidity of the model.

  1. Meso-scale machining capabilities and issues

    Energy Technology Data Exchange (ETDEWEB)

    BENAVIDES,GILBERT L.; ADAMS,DAVID P.; YANG,PIN

    2000-05-15

    Meso-scale manufacturing processes are bridging the gap between silicon-based MEMS processes and conventional miniature machining. These processes can fabricate two and three-dimensional parts having micron size features in traditional materials such as stainless steels, rare earth magnets, ceramics, and glass. Meso-scale processes that are currently available include, focused ion beam sputtering, micro-milling, micro-turning, excimer laser ablation, femto-second laser ablation, and micro electro discharge machining. These meso-scale processes employ subtractive machining technologies (i.e., material removal), unlike LIGA, which is an additive meso-scale process. Meso-scale processes have different material capabilities and machining performance specifications. Machining performance specifications of interest include minimum feature size, feature tolerance, feature location accuracy, surface finish, and material removal rate. Sandia National Laboratories is developing meso-scale electro-mechanical components, which require meso-scale parts that move relative to one another. The meso-scale parts fabricated by subtractive meso-scale manufacturing processes have unique tribology issues because of the variety of materials and the surface conditions produced by the different meso-scale manufacturing processes.

  2. Evolution of a Unique Systems Engineering Capability

    Energy Technology Data Exchange (ETDEWEB)

    Robert M. Caliva; James A. Murphy; Kyle B. Oswald

    2011-06-01

    The Idaho National Laboratory (INL) is a science-based, applied engineering laboratory dedicated to supporting U.S. Department of Energy missions in nuclear and energy research, science, and national security. The INL’s Systems Engineering organization supports all of the various programs under this wide array of missions. As with any multifaceted organization, strategic planning is essential to establishing a consistent culture and a value discipline throughout all levels of the enterprise. While an organization can pursue operational excellence, product leadership or customer intimacy, it is extremely difficult to excel or achieve best-in-class at all three. In fact, trying to do so has resulted in the demise of a number of organizations given the very intricate balancing act that is necessary. The INL’s Systems Engineering Department has chosen to focus on customer intimacy where the customer’s needs are first and foremost and a more total solution is the goal. Frequently a total solution requires the employment of specialized tools to manage system complexity. However, it is only after understanding customer needs that tool selection and use would be pursued. This results in using both commercial-off-the-shelf (COTS) tools and, in some cases, requires internal development of specialized tools. This paper describes how a unique systems engineering capability, through the development of customized tools, evolved as a result of this customer-focused culture. It also addresses the need for a common information model or analysis framework and presents an overview of the tools developed to manage and display relationships between entities, support trade studies through the application of utility theory, and facilitate the development of a technology roadmap to manage system risk and uncertainty.

  3. REDUCTIONS WITHOUT REGRET: DEFINING THE NEEDED CAPABILITIES

    Energy Technology Data Exchange (ETDEWEB)

    Swegle, J.; Tincher, D.

    2013-09-10

    This is the second of three papers (in addition to an introductory summary) aimed at providing a framework for evaluating future reductions or modifications of the U.S. nuclear force, first by considering previous instances in which nuclear-force capabilities were eliminated; second by looking forward into at least the foreseeable future at the features of global and regional deterrence (recognizing that new weapon systems currently projected will have expected lifetimes stretching beyond our ability to predict the future); and third by providing examples of past or possible undesirable outcomes in the shaping of the future nuclear force, as well as some closing thoughts for the future. This paper begins with a discussion of the current nuclear force and the plans and procurement programs for the modernization of that force. Current weapon systems and warheads were conceived and built decades ago, and procurement programs have begun for the modernization or replacement of major elements of the nuclear force: the heavy bomber, the air-launched cruise missile, the ICBMs, and the ballistic-missile submarines. In addition, the Nuclear Weapons Council has approved a new framework for nuclear-warhead life extension not fully fleshed out yet that aims to reduce the current number of nuclear explosives from seven to five, the so-called 3+2 vision. This vision includes three interoperable warheads for both ICBMs and SLBMs (thus eliminating one backup weapon) and two warheads for aircraft delivery (one gravity bomb and one cruise-missile, eliminating a second backup gravity bomb). This paper also includes a discussion of the current and near-term nuclear-deterrence mission, both global and regional, and offers some observations on future of the strategic deterrence mission and the challenges of regional and extended nuclear deterrence.

  4. REDUCTIONS WITHOUT REGRET: DEFINING THE NEEDED CAPABILITIES

    Energy Technology Data Exchange (ETDEWEB)

    Swegle, J.; Tincher, D.

    2013-09-10

    This is the second of three papers (in addition to an introductory summary) aimed at providing a framework for evaluating future reductions or modifications of the U.S. nuclear force, first by considering previous instances in which nuclear-force capabilities were eliminated; second by looking forward into at least the foreseeable future at the features of global and regional deterrence (recognizing that new weapon systems currently projected will have expected lifetimes stretching beyond our ability to predict the future); and third by providing examples of past or possible undesirable outcomes in the shaping of the future nuclear force, as well as some closing thoughts for the future. This paper begins with a discussion of the current nuclear force and the plans and procurement programs for the modernization of that force. Current weapon systems and warheads were conceived and built decades ago, and procurement programs have begun for the modernization or replacement of major elements of the nuclear force: the heavy bomber, the air-launched cruise missile, the ICBMs, and the ballistic-missile submarines. In addition, the Nuclear Weapons Council has approved a new framework for nuclear-warhead life extension � not fully fleshed out yet � that aims to reduce the current number of nuclear explosives from seven to five, the so-called �3+2� vision. This vision includes three interoperable warheads for both ICBMs and SLBMs (thus eliminating one backup weapon) and two warheads for aircraft delivery (one gravity bomb and one cruise-missile, eliminating a second backup gravity bomb). This paper also includes a discussion of the current and near-term nuclear-deterrence mission, both global and regional, and offers some observations on future of the strategic deterrence mission and the challenges of regional and extended nuclear deterrence.

  5. 亚高山林线优势种形态结构和竞争力对CO2浓度和温度升高的响应%Responses of morphological structure and competition capability of dominant plant species in subalpine timberline to elevated atmospheric CO2 concentration and air temperature

    Institute of Scientific and Technical Information of China (English)

    侯颖; 杨红超; 王开运

    2011-01-01

    By using enclosed-top chambers to simulate the future climate change, this paper studied the responses of the morphological structure and competition capability of subalpine dominant plant species ( Abies faxoniana, Deyeuxia scabrescen, Carex kansuensis, Fragaria orientali, and Cardamine tangutorum) to elevated atmospheric CO2 concentration and air temperature. After two years exposure, the crown volume, specific crown volume, specific leaf area, and specific root length of A. Faxoniana under elevated atmospheric CO2 concentration increased by 42% , 65% , 17% , and 19% , respectively. Under elevated air temperature, A. Faxoniana grew faster lengthways, its crown volume increased by 22% , and its root/shoot ratio and specific root length increased by 17%. The interaction of elevated atmospheric CO2 concentration and air temperature increased the crown volume, specific crown volume, specific leaf area, and specific root length of A. Faxoniana by 79% , 197% , 17% , and 18% , respectively. Under elevated atmospheric CO2 concentration, the D. Scabrescen had an increase of plant height, basal diameter, and leaf number per plant but a decrease of specific leaf area, whereas the C. Kansuensis, F. Orientali , and C. Tangutorum were in adverse. Under elevated air temperature, the root/shoot ratio of D. Scabrescen, C. Kansuensis, F. Orientali, and C. Tangutorum decreased, and the plant height and basal diameter of the herbs except C. Tangutorum also decreased. The interaction of elevated atmospheric CO2 concentration and air temperature increased the basal diameter and leaf number per plant of the four herbs, but decreased their specific leaf area and root/shoot ratio. In sum, both elevated atmospheric C02 concentration and elevated air temperature promoted the formation of A. Faxoniana crown, which was beneficial to the capture of resources and the enhancement of the competition ability per unit mass, but had definite negative effects on the morphological structure and

  6. Design to Process Capabilities: challenges for the use of Process Capability Databases (PCDBs) in development

    DEFF Research Database (Denmark)

    Eifler, Tobias; Göhler, Simon Moritz; Howard, Thomas J.

    2014-01-01

    In approaches such as Robust Design, Tolerance Management, Design for Six Sigma (DfSS), etc. there is little disagreement that a better understanding of inevitable production variation is conducive to the success of development projects [Eifler et al. (2013), Arvidsson and Gremyr (2008), Karmakar...... on experiential approaches or expert judgment. There are numerous examples that this subjective assessment of potential variation and a mostly informal communication between design and production engineers can result in non-satisfying product or manufacturing solutions. Whereas overestimated production...... capabilities may lead to low yields and a cost/time overrun, conservatively underestimated capabilities affect quality through the reduced design space, or through increased play, rattle/noise, size or weight. A possibility to overcome the subjective assessment of variation in development projects is a Process...

  7. Sandia Laboratories technical capabilities: design, definition, and fabrication

    Energy Technology Data Exchange (ETDEWEB)

    1976-12-01

    This report characterizes the design definition and fabrication capabilities at Sandia Laboratories. Selected applications of these capabilities are presented to illustrate the extent to which they can be applied in research and development programs. 13 figures.

  8. The Organizational Economics of Organizational Capability and Heterogeneity

    DEFF Research Database (Denmark)

    Foss, Nicolai Juul; Argyres, Nicholas; Felin, Teppo

    For decades, the literatures on firm capabilities and organizational economics have been at odds with each other, specifically relative to explaining organizational boundaries and heterogeneity. We briefly trace the history of the relationship between the capabilities literature and organizationa...

  9. Sustainable Supply Chain Capabilities: Accumulation, Strategic Types and Performance

    Directory of Open Access Journals (Sweden)

    Jung Seung Lee

    2016-05-01

    Full Text Available This paper explores the cumulative sustainable supply chain (SC capabilities and their effects on supply chain performance, including economic, environmental, and social performance. Using empirical analyses with data from 198 small- and medium-sized suppliers in Korea, this paper provides evidence about the cumulative sustainable SC capabilities, indicating that economic, social, and environmental capabilities in the supply chain mutually reinforce each other rather than traded off. This study also presents the positive effect of cumulative sustainable SC capabilities on supply chain sustainability performance. This paper identifies four distinctive groups of cumulative capabilities: the laggard, environmental-focused, social-cautious, and all-round. This study provides a better understanding about sustainable capabilities and important guidelines for managers of suppliers and buyers who wish to build strong social/environmental management capabilities without compromising economic capability throughout the entire supply chain.

  10. Understanding Dynamic Capabilities from Its Antecedents, Processes and Outcomes

    Directory of Open Access Journals (Sweden)

    Vilmar Antônio Gonçalves Tondolo

    2014-01-01

    Full Text Available The theory of Dynamic Capabilities has been one of the references in the search for understanding of the competitive advantage of organizations. However, even with the development of studies on this topic, it is not clear how the Dynamic Capabilities develop and operate within organizations. Thus, this study aims to understand the dynamics capabilities from its antecedents, processes and outcomes. Through a literature review, it was possible to identify external and internal antecedents that make Dynamics Capabilities emerge in organizations, such as environmental dynamism and corporate entrepreneurship. In when it comes to process, it was identified that the Dynamic Capabilities are formed by a set of processes that have effect on resources and organizational capabilities. Thus, the development of resources and capabilities is the outcome of Dynamic Capabilities. Finally, unlike other studies, this work considers the DCs not as a specific capacity, but as a set of processes that enable the organization to deal with changes in the competitive environment.

  11. Engineering luciferase enzymes and substrates for novel assay capabilities

    Science.gov (United States)

    Wood, Keith V.

    2004-06-01

    In the development of HTS as a central paradigm of drug discovery, fluorescent reporter molecules have generally been adopted as the favored signal transducer. Nevertheless, luminescence has maintained a prominent position among certain methodologies, most notably genetic reporters. Recently, there has been growing partiality for luminescent assays across a broader range of applications due to their sensitivity, extensive linearity, and robustness to library compounds and complex biological samples. This trend has been fostered by development several new assay designs for diverse targets such as kinases, cytochrome p450's, proteases, apoptosis, and cytotoxicity. This review addresses recent progress made in the use of bioluminescent assays for drug discovery, highlighting new detection capabilities brought about by engineering luciferase enzymes and substrates. In reporter gene applications, modified luciferases have provided greatly improved expression efficiency in mammalian cells, improved responsiveness to changes of transcriptional rate, and increased the magnitude of the reporter response. Highly stabilized luciferase mutants have enabled new assays strategies for high-throughput screening based on detection of ATP and luciferin. Assays based on ATP support rapid analysis of cell metabolism and enzymatic processes coupled to ATP hydrolysis. Although luciferin is found natively only in luminous beetles, coupled assays have been designed using modified forms of luciferin requiring the action of second enzyme to yield luminescence. Due to the very low inherent background and protection of the photon-emitter afforded by the enzyme, bioluminescent assays often outperform the analogous fluorescent assays for analyses performed in multiwell plates.

  12. Radiation and Health Technology Laboratory Capabilities

    Energy Technology Data Exchange (ETDEWEB)

    Bihl, Donald E.; Lynch, Timothy P.; Murphy, Mark K.; Myers, Lynette E.; Piper, Roman K.; Rolph, James T.

    2005-07-09

    The Radiological Standards and Calibrations Laboratory, a part of Pacific Northwest National Laboratory (PNNL)(a) performs calibrations and upholds reference standards necessary to maintain traceability to national standards. The facility supports U.S. Department of Energy (DOE) programs at the Hanford Site, programs sponsored by DOE Headquarters and other federal agencies, radiological protection programs at other DOE and commercial nuclear sites and research and characterization programs sponsored through the commercial sector. The laboratory is located in the 318 Building of the Hanford Site's 300 Area. The facility contains five major exposure rooms and several laboratories used for exposure work preparation, low-activity instrument calibrations, instrument performance evaluations, instrument maintenance, instrument design and fabrication work, thermoluminescent and radiochromic Dosimetry, and calibration of measurement and test equipment (M&TE). The major exposure facilities are a low-scatter room used for neutron and photon exposures, a source well room used for high-volume instrument calibration work, an x-ray facility used for energy response studies, a high-exposure facility used for high-rate photon calibration work, a beta standards laboratory used for beta energy response studies and beta reference calibrations and M&TE laboratories. Calibrations are routinely performed for personnel dosimeters, health physics instrumentation, photon and neutron transfer standards alpha, beta, and gamma field sources used throughout the Hanford Site, and a wide variety of M&TE. This report describes the standards and calibrations laboratory.

  13. Recommended satellite imagery capabilities for disaster management

    Science.gov (United States)

    Richards, P. B.; Robinove, C. J.; Wiesnet, D. R.; Salomonson, V. V.; Maxwell, M. S.

    1982-01-01

    This study explores the role that satellite imaging systems might play in obtaining information needed in the management of natural and manmade disasters. Information requirements which might conceivably be met by satellite were identified for over twenty disasters. These requirements covered pre-disaster mitigation and preparedness activities, disaster response activities, and post-disaster recovery activities. The essential imaging satellite characteristics needed to meet most of the information requirements are 30 meter (or finer) spatial resolution, frequency of observations of one week or less, data delivery times of one day or less, and stereo, synoptic all-weather coverage of large areas in the visible, near infrared, thermal infrared and microwave bands. Of the current and planned satellite systems investigated for possible application to disaster management, Landsat-D and SPOT appear to have the greatest potential during disaster mitigation and preparedness activities, but all satellites studied have serious deficiencies during response and recovery activities. Several strawman concepts are presented for a satellite system optimized to support all disaster management activities.

  14. Hybrid Reality Lab Capabilities - Video 2

    Science.gov (United States)

    Delgado, Francisco J.; Noyes, Matthew

    2016-01-01

    objects that have the same shape, size, location to their physical object counterpart in virtual reality environment can be a game changer when it comes to training, planning, engineering analysis, science, entertainment, etc. Our Project is developing such capabilities for various types of environments. The video outlined with this abstract is a representation of an ISS Hybrid Reality experience. In the video you can see various Hybrid Reality elements that provide immersion beyond just standard Virtual Reality or Augmented Reality.

  15. Establishment and assessment of code scaling capability

    Science.gov (United States)

    Lim, Jaehyok

    In this thesis, a method for using RELAP5/MOD3.3 (Patch03) code models is described to establish and assess the code scaling capability and to corroborate the scaling methodology that has been used in the design of the Purdue University Multi-Dimensional Integral Test Assembly for ESBWR applications (PUMA-E) facility. It was sponsored by the United States Nuclear Regulatory Commission (USNRC) under the program "PUMA ESBWR Tests". PUMA-E facility was built for the USNRC to obtain data on the performance of the passive safety systems of the General Electric (GE) Nuclear Energy Economic Simplified Boiling Water Reactor (ESBWR). Similarities between the prototype plant and the scaled-down test facility were investigated for a Gravity-Driven Cooling System (GDCS) Drain Line Break (GDLB). This thesis presents the results of the GDLB test, i.e., the GDLB test with one Isolation Condenser System (ICS) unit disabled. The test is a hypothetical multi-failure small break loss of coolant (SB LOCA) accident scenario in the ESBWR. The test results indicated that the blow-down phase, Automatic Depressurization System (ADS) actuation, and GDCS injection processes occurred as expected. The GDCS as an emergency core cooling system provided adequate supply of water to keep the Reactor Pressure Vessel (RPV) coolant level well above the Top of Active Fuel (TAF) during the entire GDLB transient. The long-term cooling phase, which is governed by the Passive Containment Cooling System (PCCS) condensation, kept the reactor containment system that is composed of Drywell (DW) and Wetwell (WW) below the design pressure of 414 kPa (60 psia). In addition, the ICS continued participating in heat removal during the long-term cooling phase. A general Code Scaling, Applicability, and Uncertainty (CSAU) evaluation approach was discussed in detail relative to safety analyses of Light Water Reactor (LWR). The major components of the CSAU methodology that were highlighted particularly focused on the

  16. PRODUCTION CAPABILITIES EFFICIENCY PREFABRICATION ERECTION OF BUILDINGS

    Directory of Open Access Journals (Sweden)

    SOKOLOV I. A.

    2015-12-01

    Full Text Available Formulation of the problem. the largest reserves of increase of efficiency of building production concluded in the decision of problems of ensuring compliance with the technological properties of space-planning and constructive decisions of buildings organizational and technological conditions of manufacturing processes. Tendencies of development of the society determined the growth in construction, complexity of design rhenium building and makes it necessary to reduce the time of construction of buildings and reduce the cost of construction and installation works. In recent years, the architectural and compositional solutions constructed buildings are increasingly conflict with organizational, technological and technical capacity building organizations. This problem is solved by the improvement and development of new technologies of building production, the use of more modern construction machines and mechanisms. The implementation of the tasks can be solved by creating a space-planning and constructive decisions of buildings corresponding possibilities of building organizations and the creation of fundamentally new technologies. Currently, there is no single comprehensive approach allows to establish the extent to which space-constructive decisions of buildings technological possibilities of building production. Imbalance intentions and capabilities results in a significant increase in financial expenses for the construction of the building. The purpose of the article. It is necessary to propose a method of assessing the level of technological prefabrication construction of buildings, the application of which will provide an opportunity to improve the full process of erection of the building and, as a consequence, increase its efficiency by increasing the extent to which the technological properties of space-planning and constructive decisions of buildings organizational and technological conditions of manufacturing processes, pogruzki

  17. Influence of Dynamic Capabilities in Creating Disruptive Innovation

    OpenAIRE

    Čiutienė, R; Thattakath, E

    2015-01-01

    The aim of this paper is to demonstrate the influence of Dynamic Capabilities in creating Disruptive Innovation. For doing so the concepts of Dynamic Capabilities and Disruptive Innovation are reviewed. The criteria of an innovation named Disruptive Innovation are obtained by comparative study between the various innovation types. To demonstrate the role of Dynamic Capabilities in creating Disruptive Innovation, the Innovation Lifecycle is demonstrated with respect to Dynamic Capabilities. Th...

  18. The classification of customer- and brand-oriented marketing capabilities

    OpenAIRE

    2015-01-01

    According to the Resource-Based Theory of the Firm, companies need to acquire and develop a unique set of resources and capabilities to gain a competitive advantage in the market. In the last decade, a number of studies have focused on marketing capabilities. However, there has been no clear classification between marketing capabilities directed towards the development of the brand from the inside out and customer-oriented capabilities, integrating the customer in the process. Purpose of this...

  19. Using Porterian Activity Analysis to Understand Organizational Capabilities

    DEFF Research Database (Denmark)

    Sheehan, Norman T.; Foss, Nicolai Juul

    2017-01-01

    conceptualized by Porter’s writings on the activity-based view. Porterian activity analysis is becoming more accepted in the strategy literature, but no strategy scholar has explicitly used Porter’s activities, and particularly his concept of drivers, to understand and analyze organizational capabilities....... Introducing Porterian activities into the discussion of capabilities improves strategy scholars’ understanding of the bases of capability heterogeneity, offers academics future directions for research, and provides managers with guidance to enhance their organizations’ capabilities....

  20. Variable-Speed Wind Power Plant Operating With Reserve Power Capability: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Singh, M.; Gevorgian, V.; Muljadi, E.; Ela, E.

    2013-10-01

    As the level of wind penetration increases, wind turbine technology must move from merely generating power from wind to taking a role in supporting the bulk power system. Wind turbines should have the capability to provide inertial response and primary frequency (governor) response. Wind turbine generators with this capability can support the frequency stability of the grid. To provide governorresponse, wind turbines should be able to generate less power than the available wind power and hold the rest in reserves, ready to be accessed as needed. In this paper, we explore several ways to control wind turbine output to enable reserve-holding capability. The focus of this paper is on doubly-fed induction generator (also known as Type 3) and full-converter (also known as Type 4) windturbines.

  1. Defining an Approach for Future Close Air Support Capability

    Science.gov (United States)

    2017-01-01

    ARROYO CENTER Defining an Approach for Future Close Air Support Capability John Matsumura, John Gordon IV, Randall Steeb Prepared for the United...capabilities; however, this research subsequently refocused specifically on close air support (CAS) capabilities in recent conflict and the possible...1 Definition of Close Air Support

  2. Organizational Context and Capabilities for Integrating Care: A Framework for Improvement

    Directory of Open Access Journals (Sweden)

    Jenna M. Evans

    2016-08-01

    Full Text Available Background: Interventions aimed at integrating care have become widespread in healthcare; however, there is significant variability in their success. Differences in organizational contexts and associated capabilities may be responsible for some of this variability. Purpose: This study develops and validates a conceptual framework of organizational capabilities for integrating care, identifies which of these capabilities may be most important, and explores the mechanisms by which they influence integrated care efforts.  Methods: The Context and Capabilities for Integrating Care (CCIC Framework was developed through a literature review, and revised and validated through interviews with leaders and care providers engaged in integrated care networks in Ontario, Canada. Interviews involved open-ended questions and graphic elicitation. Quantitative content analysis was used to summarize the data.  Results: The CCIC Framework consists of eighteen organizational factors in three categories: Basic Structures, People and Values, and Key Processes. The three most important capabilities shaping the capacity of organizations to implement integrated care interventions include Leadership Approach, Clinician Engagement and Leadership, and Readiness for Change. The majority of hypothesized relationships among organizational capabilities involved Readiness for Change and Partnering, emphasizing the complexity, interrelatedness and importance of these two factors to integrated care efforts.  Conclusions: Organizational leaders can use the framework to determine readiness to integrate care, develop targeted change management strategies, and select appropriate partners with overlapping or complementary profiles on key capabilities. Researchers may use the results to test and refine the proposed framework, with a focus on the hypothesized relationships among organizational capabilities and between organizational capabilities and performance outcomes.

  3. Architecture capabilities to improve healthcare environments.

    Science.gov (United States)

    Ebrahimi, Ali; Mardomi, Karim; Hassanpour Rahimabad, Kasra

    2013-01-01

    The physical environment of healthcare buildings has great importance in issues such as patient safety, functional efficiency, user satisfaction, healthcare outcomes, and energy and resources consumption. The present study assesses physical environments of Iranian healthcare buildings. This study was performed using a descriptive-analytical method. Data collection was carried out via a written questionnaire. Based on the findings of this study, "functional efficiency", "user satisfaction", "environmental issues", "patient safety", "accountability in incidents and disasters", and "flexibility" are regarded as the most issues in the country's hospitals. Also, none of the parameters is "without any problem" and has a "desirable status". According to the responses, all of the healthcare buildings in this research had flaws in their physical environment, which require attention. Thus, it is necessary to review and pay more attention to the architecture of the country's healthcare buildings.

  4. Architecture Capabilities to Improve Healthcare Environments

    Directory of Open Access Journals (Sweden)

    Ali Ebrahimi

    2013-01-01

    Full Text Available Background: The physical environment of healthcare buildings has great importance in issues such as patient safety, functional efficiency, user satisfaction, healthcare outcomes, and energy and resources consumption.Objectives: The present study assesses physical environments of Iranian healthcare buildings.Materials and Methods: This study was performed using a descriptive-analytical method. Data collection was carried out via a written questionnaire.Results: Based on the findings of this study, "functional efficiency", "user satisfaction", "environmental issues", "patient safety”, “accountability in incidents and disasters", and "flexibility" are regarded as the most issues in the country's hospitals. Also, none of the parameters is "without any problem" and has a "desirable status".Conclusions: According to the responses, all of the healthcare buildings in this research had flaws in their physical environment, which require attention. Thus, it is necessary to review and pay more attention to the architecture of the country's healthcare buildings.

  5. Computer-assisted sperm analysis (CASA): capabilities and potential developments.

    Science.gov (United States)

    Amann, Rupert P; Waberski, Dagmar

    2014-01-01

    Computer-assisted sperm analysis (CASA) systems have evolved over approximately 40 years, through advances in devices to capture the image from a microscope, huge increases in computational power concurrent with amazing reduction in size of computers, new computer languages, and updated/expanded software algorithms. Remarkably, basic concepts for identifying sperm and their motion patterns are little changed. Older and slower systems remain in use. Most major spermatology laboratories and semen processing facilities have a CASA system, but the extent of reliance thereon ranges widely. This review describes capabilities and limitations of present CASA technology used with boar, bull, and stallion sperm, followed by possible future developments. Each marketed system is different. Modern CASA systems can automatically view multiple fields in a shallow specimen chamber to capture strobe-like images of 500 to >2000 sperm, at 50 or 60 frames per second, in clear or complex extenders, and in marketing, and for the understanding of the diversity of sperm responses to changes in the microenvironment in research. The four take-home messages from this review are: (1) animal species, extender or medium, specimen chamber, intensity of illumination, imaging hardware and software, instrument settings, technician, etc., all affect accuracy and precision of output values; (2) semen production facilities probably do not need a substantially different CASA system whereas biology laboratories would benefit from systems capable of imaging and tracking sperm in deep chambers for a flexible period of time; (3) software should enable grouping of individual sperm based on one or more attributes so outputs reflect subpopulations or clusters of similar sperm with unique properties; means or medians for the total population are insufficient; and (4) a field-use, portable CASA system for measuring one motion and two or three morphology attributes of individual sperm is needed for field

  6. Enhancing the Radio Astronomy Capabilities at NASA's Deep Space Network

    Science.gov (United States)

    Lazio, Joseph; Teitelbaum, Lawrence; Franco, Manuel M.; Garcia-Miro, Cristina; Horiuchi, Shinji; Jacobs, Christopher; Kuiper, Thomas; Majid, Walid

    2015-08-01

    NASA's Deep Space Network (DSN) is well known for its role in commanding and communicating with spacecraft across the solar system that produce a steady stream of new discoveries in Astrophysics, Heliophysics, and Planetary Science. Equipped with a number of large antennas distributed across the world, the DSN also has a history of contributing to a number of leading radio astronomical projects. This paper summarizes a number of enhancements that are being implemented currently and that are aimed at increasing its capabilities to engage in a wide range of science observations. These enhancements include* A dual-beam system operating between 18 and 27 GHz (~ 1 cm) capable of conducting a variety of molecular line observations, searches for pulsars in the Galactic center, and continuum flux density (photometry) of objects such as nearby protoplanetary disks* Enhanced spectroscopy and pulsar processing backends for use at 1.4--1.9 GHz (20 cm), 18--27 GHz (1 cm), and 38--50 GHz (0.7 cm)* The DSN Transient Observatory (DTN), an automated, non-invasive backend for transient searching* Larger bandwidths (>= 0.5 GHz) for pulsar searching and timing; and* Improved data rates (2048 Mbps) and better instrumental response for very long baseline interferometric (VLBI) observations with the new DSN VLBI processor (DVP), which is providing unprecedented sensitivity for maintenance of the International Celestial Reference Frame (ICRF) and development of future versions.One of the results of these improvements is that the 70~m Deep Space Station 43 (DSS-43, Tidbinbilla antenna) is now the most sensitive radio antenna in the southern hemisphere. Proposals to use these systems are accepted from the international community.Part of this research was carried out at the Jet Propulsion Laboratory, California Institute of Technology, under a contract with the National Aeronautics & Space Administration.

  7. Measuring Capability for Healthy Diet and Physical Activity

    Science.gov (United States)

    Ferrer, Robert L.; Cruz, Inez; Burge, Sandra; Bayles, Bryan; Castilla, Martha I.

    2014-01-01

    PURPOSE Patterns of diet and physical activity, major drivers of morbidity and mortality, are contingent on people’s feasible opportunities to pursue healthy behaviors. Our objective for this mixed methods study was to develop measures of feasible opportunities for diet and activity. METHODS The Capability Approach framework for evaluating people’s real freedoms to pursue their values guided the research. A community-based participatory model was applied to conduct focus groups of adults with obesity or diabetes mellitus from an economically disadvantaged Latino community. Focus group themes were developed into survey items that assess how individual circumstances and neighborhood contexts influence opportunities for diet and activity. The prevalence of different influences was explored in a sample of 300 patients from a primary care safety net clinic. Scales measuring different aspects of opportunity were created through principal components analysis. RESULTS Availability, convenience, safety, cost of food, and activity resources interact with individual circumstances, such as illness, depression, family and nonfamily supports, and scope of personal agency, to shape practical opportunities. Multiple vulnerabilities in availability of resources and moderators of resource use commonly occur together, intensifying challenges and creating difficult trade-offs. Only one-half of participants reported that physicians understood their difficulties pursuing activity, and just one-third for diet. CONCLUSIONS Our results suggest that practical opportunities for healthy behavior can be measured as a primary target for clinical and public health assessment and intervention. The Capability Approach holds promise as a framework for developing interventions responsive to both personal and environmental determinants. PMID:24445103

  8. Verification of New Floating Capabilities in FAST v8: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Wendt, F.; Robertson, A.; Jonkman, J.; Hayman, G.

    2015-01-01

    In the latest release of NREL's wind turbine aero-hydro-servo-elastic simulation software, FAST v8, several new capabilities and major changes were introduced. FAST has been significantly altered to improve the simulator's modularity and to include new functionalities in the form of modules in the FAST v8 framework. This paper is focused on the improvements made for the modeling of floating offshore wind systems. The most significant change was to the hydrodynamic load calculation algorithms, which are embedded in the HydroDyn module. HydroDyn is now capable of applying strip-theory (via an extension of Morison's equation) at the member level for user-defined geometries. Users may now use a strip-theory-only approach for applying the hydrodynamic loads, as well as the previous potential-flow (radiation/diffraction) approach and a hybrid combination of both methods (radiation/diffraction and the drag component of Morison's equation). Second-order hydrodynamic implementations in both the wave kinematics used by the strip-theory solution and the wave-excitation loads in the potential-flow solution were also added to HydroDyn. The new floating capabilities were verified through a direct code-to-code comparison. We conducted a series of simulations of the International Energy Agency Wind Task 30 Offshore Code Comparison Collaboration Continuation (OC4) floating semisubmersible model and compared the wind turbine response predicted by FAST v8, the corresponding FAST v7 results, and results from other participants in the OC4 project. We found good agreement between FAST v7 and FAST v8 when using the linear radiation/diffraction modeling approach. The strip-theory-based approach inherently differs from the radiation/diffraction approach used in FAST v7 and we identified and characterized the differences. Enabling the second-order effects significantly improved the agreement between FAST v8 and the other OC4 participants.

  9. Customer’s Advisory, Organizational Openness and Capability: the Locus of Value Creation

    Directory of Open Access Journals (Sweden)

    M. Özgür GÜNGÖR

    2011-05-01

    Full Text Available Organizations of today are aware of the necessity to communicate with customers beyond learning about their satisfaction, loyalty or complaints. The closest way is focusing on customer involvement, a general term used for capturing the responses, advises and ideas of customers in order to better proceed with innovation ideas for product and service development in a competitive market environment. This flow, which is named as “customer’s advisory” by the authors, necessitates openness and capability. Openness requires technological focus along with responsiveness and empathy in organizational culture, creating a positive communication environment. The two variables of the capability construct are frequent and bilateral information sharing. This study was conducted to detect the level of use of these two constructs by various organizations operating in Turkey. The aim was to understand the interest in customer involvement to remain competitive, how “customer’s advisory” was used to collect customer views and responses in order to nurture creativity in innovation processes. Results reflect that organizations proved to be open; responsive to meet expectations, willing to understand the customers, and reflected empathy to encourage creative ideas. Also both variables of the capability construct proved to be strong where well-educated and trained employees help most for understanding the comments of customers. Turkish organizations’ following the customer’s advisory with openness and capability brings a new focus into Customer Relationship Management via feeding a creative process leadership focus to remain competitive.

  10. A Human Development and Capabilities "Prospective Analysis" of Global Higher Education Policy

    Science.gov (United States)

    Walker, Melanie

    2010-01-01

    In global times, university education policy that holds the greatest promise for social responsibility is the focus here; the argument made is that such policy ought to be conceptualised using a normative human development and capabilities approach, drawing on the work of Amartya Sen and Martha Nussbaum. Their ideas offer a values-based way of…

  11. A Human Development and Capabilities "Prospective Analysis" of Global Higher Education Policy

    Science.gov (United States)

    Walker, Melanie

    2010-01-01

    In global times, university education policy that holds the greatest promise for social responsibility is the focus here; the argument made is that such policy ought to be conceptualised using a normative human development and capabilities approach, drawing on the work of Amartya Sen and Martha Nussbaum. Their ideas offer a values-based way of…

  12. Business Undergraduates' Perceptions of Their Capabilities in Employability Skills: Implications for Industry and Higher Education

    Science.gov (United States)

    Jackson, Denise

    2012-01-01

    In response to the continuing disparity between industry expectations and higher education provision, this study examines the self-assessed capabilities of 1,024 business undergraduates in employability skills typically considered important by industry in developed economies. The findings indicate relative perceived strengths in "social…

  13. Los Alamos National Laboratory Training Capabilities (Possible Applications in the Global Initiatives for Proliferation Prevention Program)

    Energy Technology Data Exchange (ETDEWEB)

    Martin, Olga [Los Alamos National Laboratory

    2012-06-04

    The briefing provides an overview of the training capabilities at Los Alamos National Laboratory that can be applied to nonproliferation/responsible science education at nuclear institutes in the Former Soviet Union, as part of the programmatic effort under the Global Initiatives for Proliferation Prevention program (GIPP).

  14. Business Undergraduates' Perceptions of Their Capabilities in Employability Skills: Implications for Industry and Higher Education

    Science.gov (United States)

    Jackson, Denise

    2012-01-01

    In response to the continuing disparity between industry expectations and higher education provision, this study examines the self-assessed capabilities of 1,024 business undergraduates in employability skills typically considered important by industry in developed economies. The findings indicate relative perceived strengths in "social…

  15. Fuel Fabrication Capability Research and Development Plan

    Energy Technology Data Exchange (ETDEWEB)

    Senor, David J.; Burkes, Douglas

    2014-04-17

    The purpose of this document is to provide a comprehensive review of the mission of the Fuel Fabrication Capability (FFC) within the Global Threat Reduction Initiative Convert Program, along with research and development (R&D) needs that have been identified as necessary to ensuring mission success. The design and fabrication of successful nuclear fuels must be closely linked endeavors. Therefore, the overriding motivation behind the FFC R&D program described in this plan is to foster closer integration between fuel design and fabrication to reduce programmatic risk. These motivating factors are all interrelated, and progress addressing one will aid understanding of the others. The FFC R&D needs fall into two principal categories, 1) baseline process optimization, to refine the existing fabrication technologies, and 2) manufacturing process alternatives, to evaluate new fabrication technologies that could provide improvements in quality, repeatability, material utilization, or cost. The FFC R&D Plan examines efforts currently under way in regard to coupon, foil, plate, and fuel element manufacturing, and provides recommendations for a number of R&D topics that are of high priority but not currently funded (i.e., knowledge gaps). The plan ties all FFC R&D efforts into a unified vision that supports the overall Convert Program schedule in general, and the fabrication schedule leading up to the MP-1 and FSP-1 irradiation experiments specifically. The fabrication technology decision gates and down-selection logic and schedules are tied to the schedule for fabricating the MP-1 fuel plates, which will provide the necessary data to make a final fuel fabrication process down-selection. Because of the short turnaround between MP-1 and the follow-on FSP-1 and MP-2 experiments, the suite of specimen types that will be available for MP-1 will be the same as those available for FSP-1 and MP-2. Therefore, the only opportunity to explore parameter space and alternative processing

  16. Le human capabilities per lo sviluppo umano e sociale: la prospettiva della pedagogia (The human capabilities for human and social development: the perspective of pedagogy

    Directory of Open Access Journals (Sweden)

    Angela MUSCHITIELLO

    2016-06-01

    Full Text Available The present essay, moving from a definition of the concept of capabilities in terms of attitudes to ‘make possible’—i.e., inner abilities of every person which, if adequately exploited, permit to operate in a free and responsible way within the society or the institution where he or she lives—aims at highlighting its strong pedagogical value. The definition of capabilities, though developed in economic contexts, exhibits pedagogical foundations inasmuch it emphasizes the centrality of the person as an actor free in his or her choices and thus responsible for his or her destiny. The topics dealt with in the paper are the produce of several studies and researches; they are relevant for a large audience: experts of education, managers, teachers, but also students willing to consciously pass through their educational, formative and professional assignments.

  17. Erythroleukemia cells acquire an alternative mitophagy capability.

    Science.gov (United States)

    Wang, Jian; Fang, Yixuan; Yan, Lili; Yuan, Na; Zhang, Suping; Xu, Li; Nie, Meilan; Zhang, Xiaoying; Wang, Jianrong

    2016-04-19

    Leukemia cells are superior to hematopoietic cells with a normal differentiation potential in buffering cellular stresses, but the underlying mechanisms for this leukemic advantage are not fully understood. Using CRISPR/Cas9 deletion of the canonical autophagy-essential gene Atg7, we found that erythroleukemia K562 cells are armed with two sets of autophagic machinery. Alternative mitophagy is functional regardless of whether the canonical autophagic mechanism is intact or disrupted. Although canonical autophagy defects attenuated cell cycling, proliferation and differentiation potential, the leukemia cells retained their abilities for mitochondrial clearance and for maintaining low levels of reactive oxygen species (ROS) and apoptosis. Treatment with a specific inducer of mitophagy revealed that the canonical autophagy-defective erythroleukemia cells preserved a mitophagic response. Selective induction of mitophagy was associated with the upregulation and localization of RAB9A on the mitochondrial membrane in both wild-type and Atg7(-/-) leukemia cells. When the leukemia cells were treated with the alternative autophagy inhibitor brefeldin A or when the RAB9A was knocked down, this mitophagy was prohibited. This was accompanied by elevated ROS levels and apoptosis as well as reduced DNA damage repair. Therefore, the results suggest that erythroleukemia K562 cells possess an ATG7-independent alternative mitophagic mechanism that functions even when the canonical autophagic process is impaired, thereby maintaining the ability to respond to stresses such as excessive ROS and DNA damage.

  18. Seismic imaging capabilities optimize reservoir management

    Energy Technology Data Exchange (ETDEWEB)

    Kristiansen, P. [Geco-Prakla, Oslo (Norway); Currie, M.T. [BP Exploration, Aberdeen (United Kingdom)

    1995-12-01

    Despite the fact that seismic is the only known method for illuminating the subsurface at any distance from a well, little has been done to use seismic as a tool for monitoring changes in the reservoir over time. This will change as 4-D, or time-lapse, seismic becomes more common. A permanent 4-D system has been installed at the Foinaven field, West of Shetlands in the North Sea. Tracking fluid or gas movements through seismic reservoir monitoring is the primary objective of 4-D seismic technology. Areas that do not show significant changes in the seismic response over time may indicate pools of bypassed oil that could be drilled and drained. This in itself could contribute an increased recovery by several percent. Unexpected changes in reservoir contacts could be used to identify hydraulic barriers and high permeability zones not interpreted on the original seismic or identified through well testing. Another application of monitoring the fluid or gas front would be to anticipate and possibly avoid early breakthrough in time to mitigate loss of flow rate and ultimate recovery.

  19. Atmospheric release advisory capability: year 2000 documentation

    Energy Technology Data Exchange (ETDEWEB)

    Walker, H

    1999-06-01

    This checklist provides the minimum requirements to be met for the IV and V of Y2K compliance for each mission-critical system. However, please note that other important items specific to your Program, Field or Site Offices, or Laboratory may not be adequately addressed by this checklist. Consequently, it is the responsibility of each Local Y2K Project Coordinator to ensure that due diligence has been conducted, whereby every reasonable effort has been made to assure Y2K compliance, and these efforts have been documented. Additional requirements should be jointly reviewed and agreed to by the System Owner and the IV and V agent prior to its execution. The IV and V agent should undertake the activities necessary to address all items as thoroughly as possible. The System Owner should identify and be ready to provide access to any documents that will help in the IV and V process, such as requirement definition documents, test plans, test results, etc.

  20. Exploring leadership capability and emotional intelligence as moderators of workplace bullying.

    Science.gov (United States)

    Hutchinson, Marie; Hurley, John

    2013-04-01

    This study aimed to explore the potential for emotionally intelligent leadership as a way to mitigate bullying behaviour within nursing workplace environments. As the body of evidence about bullying continues to grow there is an increasing need for researchers to direct their attention to developing theoretical frameworks that explain how bullying and victimization occur, and the types of strategies that may address the problem. The narrative synthesis of the literature presented in this paper is forwarded as supporting the need for strengthening leadership capability, especially those capabilities associated with emotional intelligence, as a means of diminishing experienced bullying within nursing. Stemming from our expanding understandings about bullying is an appreciation of the range of factors within organizations that influence the occurrence of bullying, and an awareness of the need to understand the expression, experience and management of emotions in the workplace. While both leadership and emotional intelligence capabilities offer real potential to mitigate bullying behaviour, disparity exits between clinical and managerial nurses toward preferred leadership styles and emotional intelligence is open to challenges towards its content validity. Nursing management is challenged to build upon procedural responses to bullying to include a ground up approach to leadership enhancement capability, better responses to emotions in the workplace and supporting the interpersonal and intrapersonal capabilities of the nursing workforce. © 2012 Blackwell Publishing Ltd.

  1. Implementing NASA's Capability-Driven Approach: Insight into NASA's Processes for Maturing Exploration Systems

    Science.gov (United States)

    Williams-Byrd, Julie; Arney, Dale; Rodgers, Erica; Antol, Jeff; Simon, Matthew; Hay, Jason; Larman, Kevin

    2015-01-01

    NASA is engaged in transforming human spaceflight. The Agency is shifting from an exploration-based program with human activities focused on low Earth orbit (LEO) and targeted robotic missions in deep space to a more sustainable and integrated pioneering approach. Through pioneering, NASA seeks to address national goals to develop the capacity for people to work, learn, operate, live, and thrive safely beyond the Earth for extended periods of time. However, pioneering space involves more than the daunting technical challenges of transportation, maintaining health, and enabling crew productivity for long durations in remote, hostile, and alien environments. This shift also requires a change in operating processes for NASA. The Agency can no longer afford to engineer systems for specific missions and destinations and instead must focus on common capabilities that enable a range of destinations and missions. NASA has codified a capability driven approach, which provides flexible guidance for the development and maturation of common capabilities necessary for human pioneers beyond LEO. This approach has been included in NASA policy and is captured in the Agency's strategic goals. It is currently being implemented across NASA's centers and programs. Throughout 2014, NASA engaged in an Agency-wide process to define and refine exploration-related capabilities and associated gaps, focusing only on those that are critical for human exploration beyond LEO. NASA identified 12 common capabilities ranging from Environmental Control and Life Support Systems to Robotics, and established Agency-wide teams or working groups comprised of subject matter experts that are responsible for the maturation of these exploration capabilities. These teams, called the System Maturation Teams (SMTs) help formulate, guide and resolve performance gaps associated with the identified exploration capabilities. The SMTs are defining performance parameters and goals for each of the 12 capabilities

  2. [Effects of drought stress on photosynthesis capability of Spiraea fritschiana and Spiraea bunmalba 'Goldmound'].

    Science.gov (United States)

    Liu, Hui-Min; Che, Yan-Shuang; Che, Dai-Di; Yan, Yong-Qing; Wu, Feng-Zhi

    2010-08-01

    In this paper, Spiraea fritschiana and Spiraea bunmalba 'Goldmound' were treated with mild, moderate, and severe drought to study the dynamic changes of their photosynthesis capability, and two-dimensional electrophoresis and mass spectrometry were adopted to analyze and identify the differences in the protein expression of the two species before and after the treatments, and the physiological mechanisms inducing the changes of the photosynthesis capability. Drought treatments had significant effects on the photosynthesis capability of the two species. Under drought stress, the maximum photosynthetic rate, light compensation point, and light saturation point decreased gradually, suggesting that the responses of the two species to drought stress were progressive. The two species presented stronger recovery capability after the mild and moderate stresses, but weaker recovery capability after severe stress. After the inducement of drought stress, the weaker drought-resistant S. bunmalba 'Goldmound' had six protein spots lost, eleven new protein spots appeared, thirteen protein spots up-regulation expression, and four protein spots down-regulation expression. All of the proteins were low molecular weight acidic proteins, of which, there were three kinds of different proteins that had been induced expression by drought and were the oxygen-enhanced protein factor 1 and 2 and the degradation fragments of large subunit 1,5-ribulose bisphosphate carboxylase/oxygenase. The drought- resistant difference of the two Spiraea species was related to the changes of their photosynthesis capability during drought stress.

  3. Distributed generation capabilities of the national energy modeling system

    Energy Technology Data Exchange (ETDEWEB)

    LaCommare, Kristina Hamachi; Edwards, Jennifer L.; Marnay, Chris

    2003-01-01

    the n umber of years to a positive cash flow. Some important technologies, e.g. thermally activated cooling, are absent, and ceilings on DG adoption are determined by some what arbitrary caps on the number of buildings that can adopt DG. These caps are particularly severe for existing buildings, where the maximum penetration for any one technology is 0.25 percent. On the other hand, competition among technologies is not fully considered, and this may result in double-counting for certain applications. A series of sensitivity runs show greater penetration with net metering enhancements and aggressive tax credits and a more limited response to lowered DG technology costs. Discussion of alternatives to the current code is presented in Section 4. Alternatives or improvements to how DG is modeled in NEMS cover three basic areas: expanding on the existing total market for DG both by changing existing parameters in NEMS and by adding new capabilities, such as for missing technologies; enhancing the cash flow analysis but incorporating aspects of DG economics that are not currently represented, e.g. complex tariffs; and using an external geographic information system (GIS) driven analysis that can better and more intuitively identify niche markets.

  4. Managing corporate capabilities:theory and industry approaches.

    Energy Technology Data Exchange (ETDEWEB)

    Slavin, Adam M.

    2007-02-01

    This study characterizes theoretical and industry approaches to organizational capabilities management and ascertains whether there is a distinct ''best practice'' in this regard. We consider both physical capabilities, such as technical disciplines and infrastructure, and non-physical capabilities such as corporate culture and organizational procedures. We examine Resource-Based Theory (RBT), which is the predominant organizational management theory focused on capabilities. RBT seeks to explain the effect of capabilities on competitiveness, and thus provide a basis for investment/divestment decisions. We then analyze industry approaches described to us in interviews with representatives from Goodyear, 3M, Intel, Ford, NASA, Lockheed Martin, and Boeing. We found diversity amongst the industry capability management approaches. Although all organizations manage capabilities and consider them to some degree in their strategies, no two approaches that we observed were identical. Furthermore, we observed that theory is not a strong driver in this regard. No organization used the term ''Resource-Based Theory'', nor did any organization mention any other guiding theory or practice from the organizational management literature when explaining their capabilities management approaches. As such, we concluded that there is no single best practice for capabilities management. Nevertheless, we believe that RBT and the diverse industry experiences described herein can provide useful insights to support development of capabilities management approaches.

  5. Open Source Testing Capability for Geospatial Software

    Science.gov (United States)

    Bermudez, L. E.

    2013-12-01

    resource for technologists responsible for interoperability among scientific tools that are used for sharing data and linking models, both within and between Earth science disciplines. This presentation will focus on the OGC compliance infrastructure and its open source tools, open source tests and and open issue tracker that can be used to improve scientific software. [1] http://www.opengeospatial.org/resource/products/stats [2] http://cite.opengeospatial.org/teamengine/ [3] http://cite.opengeospatial.org/te2

  6. Functional capabilities of marmoset T and B lymphocytes in primary in vitro antibody formation

    Energy Technology Data Exchange (ETDEWEB)

    Nickerson, D.A.; Gengozian, N.

    1981-01-15

    In vitro tests of T- and B-lymphocyte function of two marmoset species, Saguinus fuscicollis and Saguinus oedipus, were examined to explore the lower immune response profile previously reported for S. o. oedipus. Experiments with trinitrophenyl-lipopolysaccharide (TNP-LPS) revealed peripheral blood leukocytes (PBL) from both species capable of antibody formation. This response was both T cell and monocyte independent; indeed, removal of T cells led to an enhanced response, indicating a regulatory role for this cell in each species. Studies with the nonmitogenic form of TNP-LPS, trinitrophenyl-base-hydrolyzed-lipopolysaccharide, revealed that plaque-forming cells could be obtained from S. fuscicollis PBL while S. o. oedipus PBL were unresponsive. This report also demonstrates that hemopoietic chimerism, a feature common to all marmosets, has a negative influence on antibody-forming capabilities.

  7. Statistical Capability Study of a Helical Grinding Machine Producing Screw Rotors

    Science.gov (United States)

    Holmes, C. S.; Headley, M.; Hart, P. W.

    2017-08-01

    Screw compressors depend for their efficiency and reliability on the accuracy of the rotors, and therefore on the machinery used in their production. The machinery has evolved over more than half a century in response to customer demands for production accuracy, efficiency, and flexibility, and is now at a high level on all three criteria. Production equipment and processes must be capable of maintaining accuracy over a production run, and this must be assessed statistically under strictly controlled conditions. This paper gives numerical data from such a study of an innovative machine tool and shows that it is possible to meet the demanding statistical capability requirements.

  8. Dynamics in Inter-Firm Collaboration: The Impact of Alliance Capabilities on Performance

    Directory of Open Access Journals (Sweden)

    Gerrit Willem Ziggers

    2010-05-01

    Full Text Available In this study we question the direct relationship between a firm’s alliance capability and alliance performance. We contend that this relationship is mediated through post-information factors such as alliance management and relational quality.Drawing from the Resource Based View a model is presented that explicates these indirect relationships. Partial least squares analysis was used to test three hypotheses, using a sample of Dutch alliance managers responsible for non‐equity alliances in agribusiness and the food industry. Our empirical findings affirm the hypothesized indirect relationships between a firm’s alliance capability and alliance performance.

  9. Acetaminophen and acetone sensing capabilities of nickel ferrite nanostructures

    Science.gov (United States)

    Mondal, Shrabani; Kumari, Manisha; Madhuri, Rashmi; Sharma, Prashant K.

    2017-07-01

    Present work elucidates the gas sensing and electrochemical sensing capabilities of sol-gel-derived nickel ferrite (NF) nanostructures based on the electrical and electrochemical properties. In current work, the choices of target species (acetone and acetaminophen) are strictly governed by their practical utility and concerning the safety measures. Acetone, the target analyte for gas sensing measurement is a common chemical used in varieties of application as well as provides an indirect way to monitor diabetes. The gas sensing experiments were performed within a homemade sensing chamber designed by our group. Acetone gas sensor (NF pellet sensor) response was monitored by tracking the change in resistance both in the presence and absence of acetone. At optimum operating temperature 300 °C, NF pellet sensor exhibits selective response for acetone in the presence of other common interfering gases like ethanol, benzene, and toluene. The electrochemical sensor fabricated to determine acetaminophen is prepared by coating NF onto the surface of pre-treated/cleaned pencil graphite electrode (NF-PGE). The common name of target analyte acetaminophen is paracetamol (PC), which is widespread worldwide as a well-known pain killer. Overdose of PC can cause renal failure even fatal diseases in children and demand accurate monitoring. Under optimal conditions NF-PGE shows a detection limit as low as 0.106 μM with selective detection ability towards acetaminophen in the presence of ascorbic acid (AA), which co-exists in our body. Use of cheap and abundant PGE instead of other electrodes (gold/Pt/glassy carbon electrode) can effectively reduce the cost barrier of such sensors. The obtained results elucidate an ample appeal of NF-sensors in real analytical applications viz. in environmental monitoring, pharmaceutical industry, drug detection, and health monitoring.

  10. Reinventing the International Space Station Payload Integration Processes and Capabilities

    Science.gov (United States)

    Jones, Rod; Price, Carmen; Copeland, Scott; Geiger, Wade; Geiger, Wade; Rice, Amanda; Lauchner, Adam

    2011-01-01

    The fundamental ISS payload integration philosophy, processes and capabilities were established in the context of how NASA science programs were conducted and executed in the early 1990 s. Today, with the designation of the United States (US) portion of ISS as a National Lab, the ISS payload customer base is growing to include other government agencies, private and commercial research. The fields of research are becoming more diverse expanding from the NASA centric physical, materials and human research sciences to test beds for exploration and technology demonstration, biology and biotechnology, and as an Earth and Space science platform. This new customer base has a broader more diverse set of expectations and requirements for payload design, verification, integration, test, training, and operations. One size fits all processes are not responsive to this broader customer base. To maintain an organization s effectiveness it must listen to its customers, understand their needs, learn from its mistakes, and foster an environment of continual process improvement. The ISS Payloads office is evolving to meet these new customer expectations.

  11. Semantic markup of sensor capabilities: how simple it too simple?

    Science.gov (United States)

    Rueda-Velasquez, C. A.; Janowicz, K.; Fredericks, J.

    2016-12-01

    Semantics plays a key role for the publication, retrieval, integration, and reuse of observational data across the geosciences. In most cases, one can safely assume that the providers of such data, e.g., individual scientists, understand the observation context in which their data are collected,e.g., the used observation procedure, the sampling strategy, the feature of interest being studied, and so forth. However, can we expect that the same is true for the technical details of the used sensors and especially the nuanced changes that can impact observations in often unpredictable ways? Should the burden of annotating the sensor capabilities, firmware, operation ranges, and so forth be really part of a scientist's responsibility? Ideally, semantic annotations should be provided by the parties that understand these details and have a vested interest in maintaining these data. With manufactures providing semantically-enabled metadata for their sensors and instruments, observations could more easily be annotated and thereby enriched using this information. Unfortunately, today's sensor ontologies and tool chains developed for the Semantic Web community require expertise beyond the knowledge and interest of most manufacturers. Consequently, knowledge engineers need to better understand the sweet spot between simple ontologies/vocabularies and sufficient expressivity as well as the tools required to enable manufacturers to share data about their sensors. Here, we report on the current results of EarthCube's X-Domes project that aims to address the questions outlined above.

  12. Spectropolarimetric capabilities of Ca II 8542 A line

    CERN Document Server

    Noda, C Quintero; Rodríguez, J de la Cruz; Katsukawa, Y; Ichimoto, K; Anan, T; Suematsu, Y

    2016-01-01

    The next generation of space and ground-based solar missions aim to study the magnetic properties of the solar chromosphere using the infrared Ca II lines and the He I 10830 {\\AA} line. The former seem to be the best candidates to study the stratification of magnetic fields in the solar chromosphere and their relation to the other thermodynamical properties underlying the chromospheric plasma. The purpose of this work is to provide a detailed analysis of the diagnostic capabilities of the Ca II 8542 {\\AA} line, anticipating forthcoming observational facilities. We study the sensitivity of the Ca II 8542 {\\AA} line to perturbations applied to the physical parameters of reference semi-empirical 1D model atmospheres using response functions and we make use of 3D MHD simulations to examine the expected polarization signals for moderate magnetic field strengths. Our results indicate that the Ca II 8542 {\\AA} line is mostly sensitive to the layers enclosed between $\\log$ $\\tau=[0,-5.5]$, under the physical conditio...

  13. Development of Framework for Acquisition of Avionics Integration Capability

    Directory of Open Access Journals (Sweden)

    Fahad RIAZ

    2015-12-01

    Full Text Available With the rapid advancement in electronics technology, in the last three decades Avionics systems, have evolved from standalone single function units to functionally correlated and interdependent systems. To harness the potential of this technological growth in the constraints of time, power and space, the specialty of Avionics Integration has emerged. Avionics Integration Technology is a multi-faceted discipline involving a myriad of activities starting from design conception and concluding on final qualification and acceptance of the avionics suite. Currently, only a few advanced countries worldwide possess this technology and no formal framework has been defined in literature or journals that encompass the range of activities involved in avionics Integration. This paper will present a formal framework required for development of Avionics Integration Capability. It will cover the core skill areas required and their interdependencies. The recognized “V” Development model will be presented with complete identification of Integrator and Sub Contractor roles and responsibilities. For the technical execution of Avionics Integration, specialist domains will be identified along broad definition of required tool sets and work flow of activities to be conducted.

  14. Remote Sensing Capabilities to Detect Maritime Vessels in Distress

    Science.gov (United States)

    Larsen, Rudolph K.; Green, John M.; Huxtable, Barton D.; Rais, Houra

    2004-01-01

    The National Aeronautics and Space Administration (NASA) has the responsibility for conducting research and development for search and rescue as charged under the National Search and Rescue Plan. For over two decades this task has been undertaken by the Search and Rescue Mission Office at the NASA Goddard Space Flight Center (GSFC). The technology used by the highly successful beacon locating satellite system, Cospas-Sarsat, was conceived and developed at GSFC and is managed by the National Oceanographic and Atmospheric Administration (NOAA). Using beacon-less remote sensing to find people and vessels in distress complements the demonstrated life saving capabilities of this satellite system. The Search and Rescue Mission Office has been investigating the use of fully polarimetric synthetic aperture radar to locate crashed aircraft. An overview of this effort and potential maritime applications of Search and Rescue Synthetic Aperture Radar (SAR) will be presented. The Mission Office has also developed a Laser search and rescue system called L-SAR. The prototype instrument was designed and built by SenSyTech Inc. It specifically targets the location of novel retro-reflective material easily applied to rescue equipment and vessels in distress. An overview of this effort will also be presented.

  15. Global justice, capabilities approach and commercial surrogacy in India.

    Science.gov (United States)

    Saravanan, Sheela

    2015-08-01

    Inequalities, ineffective governance, unclear surrogacy regulations and unethical practices make India an ideal environment for global injustice in the process of commercial surrogacy. This article aims to apply the 'capabilities approach' to find possibilities of global justice through human fellowship in the context of commercial surrogacy. I draw primarily on my research findings supplemented by other relevant empirical research and documentary films on surrogacy. The paper reveals inequalities and inadequate basic entitlements among surrogate mothers as a consequence of which they are engaged in unjust contracts. Their limited entitlements also limit their opportunities to engage in enriching goals. It is the role of the state to provide all its citizens with basic entitlements and protect their basic human rights. Individuals in India evading their basic duty also contribute to the existing inequalities. Individual responsibilities of the medical practitioners and the intended parents are in question here as they are more inclined towards self-interest rather than commitment towards human fellowship. At the global level, the injustice in transnational commercial surrogacy practices in developing countries calls for an international declaration of women and child rights in third party reproduction with a normative vision of mutual fellowship and human dignity.

  16. Capability studies, helpful tools in process quality improvement

    Directory of Open Access Journals (Sweden)

    Simion Carmen

    2017-01-01

    Full Text Available Ability of processes to meet customer’quality requirements has become essential for providing competitive advantages such as cost savings, reducing the number of nonconfoming products or increasing customer satisfaction. This paper aims to conduct a capability study for a swaging process (that ensures an assembly dimension of a key product characteristic (the outer diameter of a new part, related to the concept of capability and performance indices and how these metrics can be used and interpreted to become powerful tools for decision making. To achieve the goal of the paper, the following key aspects were analyzed: capability of the measurement system capability (gage R&R, production equipment (machine capability and process capability/performance during the first serial production. The analysis was performed with Minitab® 17, the most commonly used software for quality improvement.

  17. Recent Investments by NASA's National Force Measurement Technology Capability

    Science.gov (United States)

    Commo, Sean A.; Ponder, Jonathan D.

    2016-01-01

    The National Force Measurement Technology Capability (NFMTC) is a nationwide partnership established in 2008 and sponsored by NASA's Aeronautics Evaluation and Test Capabilities (AETC) project to maintain and further develop force measurement capabilities. The NFMTC focuses on force measurement in wind tunnels and provides operational support in addition to conducting balance research. Based on force measurement capability challenges, strategic investments into research tasks are designed to meet the experimental requirements of current and future aerospace research programs and projects. This paper highlights recent and force measurement investments into several areas including recapitalizing the strain-gage balance inventory, developing balance best practices, improving calibration and facility capabilities, and researching potential technologies to advance balance capabilities.

  18. The Adaptive Capabilities of Organizations. Case of Polish Public Hospitals

    Directory of Open Access Journals (Sweden)

    Mariola Ciszewska-Mlinaric

    2009-09-01

    Full Text Available Information gathering and analysis, reaction design and implementation, and activities correction and learning are three types of adaptive capabilities connected to three phases of organizational adaptation to the environment. The primary objective of this article is to present how adaptive capabilities of high and low performers differ. In the second part of the article the key factors influencing the adaptive capabilities of Polish public hospitals will be identified and examined.

  19. Capabilities for strategic flexibility:a cognitive content framework

    OpenAIRE

    Combe, Ian; Greenley, Gordon E.

    2004-01-01

    Different forms of strategic flexibility allow for reactive adaptation to different changing environments and the proactive driving of change. It is therefore becoming increasingly important for decision makers to not only possess marketing capabilities, but also the capabilities for strategic flexibility in its various forms. However, our knowledge of the relationships between decision makers’ different ways of thinking and their capabilities for strategic flexibility is limited. This limita...

  20. Brave New Worlds, Capabilities and the Graduates of Tomorrow

    OpenAIRE

    2011-01-01

    In 'What is Enlightenment?' Foucault poses the question: 'How can the growth of capabilities be disconnected from the intensification of power relations?' This article revisits that question by raising critical questions about graduate capabilities. Its aim is to reflect, and to prompt reflection, on the complexities of the definition, implementation and evaluation of capabilities-based curriculum in the discipline of cultural studies and in the higher education sector more broadly. It asks w...