WorldWideScience

Sample records for candelaria bogota dc

  1. Gentrificación de La Candelaria (Bogotá D.C). Agentes y estrategias intervinientes

    OpenAIRE

    Manrique Gómez, Adrian Smith

    2013-01-01

    El sector de La Candelaria (Bogotá D.C.- Colombia), se convierte de nuevo en lugar de residencia y consumo de las clases de altos ingresos, luego que la abandonaran a mediados del siglo XX a razón de múltiples problemáticas urbanas. Es un retorno que converge en la rehabilitación física, económica y social del sector, conocido en términos geográficos como fenómeno de gentrificación. El propósito de la investigación es entonces, ofrecer una lectura al funcionamiento de este fenómeno medi...

  2. Outbreack of salmonellosis after family party at locality of Puente Aranda, Bogota DC, Colombia

    Directory of Open Access Journals (Sweden)

    Teresa Moreno

    2011-03-01

    Full Text Available Background: Foodborne Diseases (FBD outbreaks occur every day worldwide, being salmonellosis their most common cause. On the epidemiologic week 44-2010, “Hospital del Sur ESE” received a notification on a FBD during a familiy gathering in a house of the Puente Aranda locality (Bogota – Colombia and executed an outbreak investigation to enforce control actions and to offer indications. Methods: Descriptive outbreak confirmation study of a probable FBD by Salmonella according to the symptoms and case definition. A house visit, exposed epidemiologic inquiry and stool cultures. Data were included and analysed with Epi-Info 3.5.1® using absolute, relative, central trend and dispersion measurements. Results: Of 28 people, 27 (96% ate the suspicious food – chicken rice; 2 (7,4% were hospitalized, 8 (29,8% needed attention at urgency ward. Attack rate was 59,3% for women, 40,4% for men; the most affected people by age was 1-4 year (18,8%; incubation period was 9 to 30 hours; all exposed suffered vomit, diarrhea, abdominal pain, nausea and headaches; three stool samples were positive for Salmonella spp. Conclusions: A FBD by Salmonella spp. was confirmed; main source was –possibly- poor food manipulation and conservation. It is necessary to intensify information-education-communication actions related to food preparation, consumption and preservation.

  3. Edificios de concreto reforzado siguiendo la NSR-10 vs sismo de Quetame registrado en Bogota D.C

    National Research Council Canada - National Science Library

    Ruiz, D.M; Jaramillo, R; Riveros, C.E; Gallego-Silva, Mauricio

    2012-01-01

    Se presenta el analisis no lineal dinamico en tres direcciones de 6 edificios de concreto reforzado de 5, 12 y 20 pisos, disenados con la NSR-10 y la zonificacion de respuesta sismica de Bogota del ano 2010...

  4. Metals and metalloid in eight fish species consumed by citizens of Bogota D.C., Colombia, and potential risk to humans.

    Science.gov (United States)

    López-Barrera, Ellie Anne; Barragán-Gonzalez, Rafael G

    2016-01-01

    The risk imposed upon society by consumption of foods contaminated with metals and metalloids is an environmental problem attributed to the increasing number of mining extraction activities currently underway in Colombia. The aim of the current study was to determine concentrations of mercury (Hg), lead (Pb), cadmium (Cd), and a metalloid arsenic (As) found in the species of most consumed fish species by citizens of Bogota D.C. (Colombia), and the consequent potential risk to human health was also calculated. Muscle samples of 8 fish species were obtained from 203 individuals collected through 2014. The highest metal concentrations detected were as follows: Pb in Oncorhynchus sp. (0.0595 mg/kg), Cd and Hg in Pimelodus sp. (0.0072 and 0.0579 mg/kg, respectively), and As in Scomberomorus sp (0.0471 mg/kg). Further, the levels of metal accumulation from consumption of fish were calculated utilizing the metal pollution index (MPI), with elevated values noted in Pseudoplatystoma sp (0.06 mg/kg), followed by Scomberomorus sp. and Centropomus sp. (0.05 and 0.04 mg/kg, respectively). The multiple species exposure index (Em.j) denotes the level of exposure associated with consumption of various contaminated fish species, and this level occurred in decreasing order as follows: As > Pb > Cd > Hg. The multiple chemical exposure index (Ej.m), which accounts for exposure to multiple metals, identified Prochilodus sp. as the species displaying the highest level of exposure per consumption (8 × 10(-6) mg/kg-d). The target hazard quotient (THQ) for human health indicated high levels for Hg and Cd in Prochilodus sp. (0.026 and 0.005, respectively), Pb in Oncorhynchus sp (0.025), and As in Pseudoplatistoma sp. and Centropomus sp. (0.023). Data emphasize the need for adequate nationwide public policies that promote assessment of exposure levels and potential adverse health risks associated with dietary consumption of different fish species in Colombia.

  5. Bogota--Colombia's thriving capital.

    Science.gov (United States)

    Hakkert, R

    1987-05-01

    Like most of its Latin American counterparts, Colombia is rapidly urbanizing. Home to 20% of Colombia's urban population and the largest industrial agglomeration in the nation, Bogota shares its dominance with several other large Colombian cities. Projections compiled from the 1973 census--the latest census available-- project the 1980 population of Bogota at 4 to 5.1 million. Government estimates peg Bogota's 1990 population at 8.5 million people. Most of Bogota's best neighborhoods now lie to the north of the city. On the whole, housing contrasts in Bogota are not as stark as in some other Latin American cities, although the estimated 1980 housing deficit of 210,000 units led to significant self-help construction. Women have made dramatic in-roads into equalizing educational attainment with men. Among the city's most important problems is unemployment. Completed family size in Bogota has plummeted since the inception of family planning programs in the early 1960s. Between 1956 and 1973, Colombia's per capita income increased by about 45%, but the increase was more rapid in Bogota, where per capita incomes in 1970 were about 60% higher than the national average. Much of the current in-depth data on Bogota comes from the World Bank research project known as the City Study. Much of the data in this profile of Bogota came from the analysis of this survey data, presented in World Bank Research publications. Rather than from Colombia's last census of 1973.

  6. La Candelaria Neighborthood City of Guatemala, Forgotten Architectural Heritage

    Directory of Open Access Journals (Sweden)

    Leonel Alberto de la Roca Coronado

    2016-07-01

    Full Text Available The new Guatemala de la Asunción, has been impacted by climate change, due to its geographical location, the tectonic plates and volcanic features of the soil, which causes that the country is always threatened by tragic events that occur suddenly and on a recurring basis, by natural events (volcanic eruptions, earthquakes, hurricanes, storms, floods, landslides. Because the age of the District of La Candelaria, (since it is the second set in the Valle de la Ermita, after the transfer of the city in January 1776, likewise it was one of the areas damaged by the earthquake of February 4, 1976, has as a consequence that the architectural heritage of the District of La Candelaria is constantly at risk. In the 21st century, the problems of nationwide architectural heritage have additional components that make it more vulnerable to ruin, (social, economic and political deterioration, insecurity, which added to the poor state of physical buildings, referred to the lack of maintenance, little financial support and interest of the authorities to apply the laws for the protection of immovable cultural heritage assets. Within the Barrio of La Candelaria, there are homes and architectural remains, which could improve its current state. Guatemala needs to join the State and private institutions to ensure prevention and safeguarding of the heritage. 

  7. INCIDENCIA DE INCENDIOS SOBRE LA VEGETACIÓN DE CUNDINAMARCA Y BOGOTÁ D.C. (COLOMBIA, ENTRE 2001 Y 2010 Fire Incidence on Vegetation in Cundinamarca and Bogota D.C. (Colombia During the 2001-2010 Period

    Directory of Open Access Journals (Sweden)

    DIEGO AMAYA VILLABONA

    2012-04-01

    Full Text Available En este trabajo se analizó la distribución temporal y espacial de incendios respecto a las coberturas vegetales del departamento de Cundinamarca y Bogotá D.C., en el periodo 2001-2010. A partir de datos de focos activos provenientes de MODIS, se encontró que los incendios en el área de estudio siguen un patrón constituido por eventos en las dos temporadas secas (enero-marzo y julio-septiembre, destacando además que la incidencia es causada por poca precipitación e intervención del hombre en espacios naturales. Las poblaciones más afectadas son Caparrapí: 159 incendios, Bogotá: 152 incendios y Guaduas: 101 incendios. Bogotá registra la mayoría de sus incendios en la parte sur, localidad de Sumapaz. En cuanto a áreas protegidas del departamento el parque con más registros de focos de incendios es el Parque Nacional Natural Sumapaz (84, seguido por el Distrito de Manejo Integrado Cuchilla de San Antonio (21 y la Reserva Forestal Protectora Páramo Grande (9. Entre la vegetación afectada se destacan pastos, arbustos, matorrales y sus mosaicos, resaltando altos valores de incidencia sobre la vegetación de páramo y subpáramo. Las partes centro y noroccidentales, sur y surorientales del departamento, son las que presentan más conflagraciones, la mayoría se ubican entre los 0 a 1.000 msnm y 3.000 a 4.000 msnm. Finalmente los incendios en el área de estudio muestran un patrón asociado al clima y en particular a la temporada seca, pero también un patrón altitudinal. Las áreas de PNN, de protección y conservación regionales, son efectivas contra los incendios.This work aims to use remote sensing as a method for determining fire dynamics in the department of Cundinamarca and the city of Bogotá D.C. in Colombia, by analyzing the temporal and spatial distribution of fires and the different types of vegetation affected in the 2011-2010 period. Based on MODIS fire hotspots, we found that the pattern fires in the study area are

  8. RELACIÓN ENTRE ASOCIACIÓN MICORRÍCICA CON EL ESTADO FITOSANITARIO EN EL ARBOLADO URBANO DE BOGOTÁ D.C. RELATIONSHIP BETWEEN MYCORRHIZAL ASSOCIATION WITH THE STATE WOODY PLANT HEALTH IN THE CITY OF BOGOTA DC

    Directory of Open Access Journals (Sweden)

    CAROLINA RAMOS MONTAÑO

    Full Text Available En parques y zonas verdes de Bogotá DC., se evaluó la densidad de esporas y la colonización radical en la rizosfera de tres especies comunes del arbolado urbano: Eugenia myrtifolia, Ficus soatensis y Croton bogotensis, con el fin de determinar si el grado de micorrización está relacionado con el estado fitosanitario y si existe diferencias en el grado de micorrización entre dos zonas climáticas distintas. Se comprobó que la especie y el clima son fuentes significativas de variabilidad en el estado general de micorrización. Eugenia myrtifolia presentó la mayor colonización radical promedio pero el más bajo promedio de densidad de esporas, mientras C. bogotensis tuvo la respuesta contraria. En general los ambientes secos y semisecos favorecieron la micorrización. Considerando los datos de todas especies, se comprobó una relación positiva entre el estado fitosanitario general y la colonización radicular, y al evaluar la relación con la afectación de síntomas específicos se encontró que la clorosis, la quemazón y la herbivoría mantienen una relación negativa con la micorrización en E. myrtifolia y C. bogotensis. Los resultados sugieren que la asociación con hongos de micorriza arbuscular ayuda de algún modo a reducir esos síntomas, presentando un potencial importante para mejorar la sanidad y vida media de las especies arbóreas en la ciudad.Spore number and root infection by arbuscular mycorrhizal fungi were evaluated in Eugenia myrtifolia, Ficus soatensis and Croton bogotensis, in parks and green zones of urban woodlands of Bogotá DC . The aim was to investigate relations between mycorrhizal associations and tree phyto-sanitary conditions, and effects of two distinct climatic zones. It was demonstrated that plant species and climate are significant sources of variations in the general mycorrhizal state. Eugenia myrtifolia showed the highest degree of root colonization but the lowest number of spores, while C

  9. The Bogota tramway, 1882 – 1951

    Directory of Open Access Journals (Sweden)

    Juan Santiago Correa

    2017-05-01

    Full Text Available This article analyzes the evolution of the tramway system in Bogota and the business development that came along during the period 1882-1951, to understand the relationship of the élite with this project and the impact of the new transport technologies on the city design, the social and economic dynamics, and its effect on the popular sectors.

  10. El centro histórico de la villa de Candelaria (Tenerife

    Directory of Open Access Journals (Sweden)

    Juan Sebastián López García

    2013-11-01

    Full Text Available Candelaria destaca en Tenerife con un alto grado de significación por el protagonismo que tuvo en algunos episodios notables de la isla. La Aparición de la imagen de la Virgen en estas tierras del menceyato de Güimar constituyo una singular página de Ia etapa de contactos entre la cultura guanche y los primeros evangelizadores de Canarias, circunstancia que derivará en la particular devoción que el pueblo tinerfeño y canario dispensará a esta advocación mariana a través de los siglos. Si se le compara con otros centros históricos tinerfeños, Candelaria contrasta con ellos por la modestia de su núcleo. En sus orígenes, pasó por varias vicisitudes durante los siglos XV y XVI, para comenzar a consolidarse a partir de las centurias del XVII y XVIII. Una serie de espacios e inmuebles formarán parte de su constante histórica y atestiguarán este pasado, entre ellos destacan la Cueva de los Camellos, la Cueva de Achbinico- San Blas, Convento de Dominicos, Basílica de Nuestra Señora de Candelaria, plaza de los peregrinos, Casa del Cabildo, Iglesia de Santa Ana, etc.Candelaria stands out within Tenerife for its leading role in some of the most outstanding episodes of the Island. The appearance of Virgin Mary within the lands of the Güimar "menceyato", was a singularly important episode in the period of contact between "guanche" culture and the first wave of evangelists that arrived in the Canaries. This circumstance led to the particularly strong devotion felt throughout the Centuries by the inhabitants of Tencrife, as well as by canarians in general, to the worship of Virgin Mary. In contrast to other historical centres in Tenerife, Candelaria has a small core, which started to consolidate from the seventeenth and eighteenth centuries onwards. A series of public spaces and buildings stand witness to thi spast; standing out amongst them are the Camel's Cave, the Cave of Achbinico-San Blas, the Convent of the Dorninicans, the Basilica

  11. The Pact of Bogota: Cases and Practice

    Directory of Open Access Journals (Sweden)

    María Teresa Infante Caffi

    2017-03-01

    Full Text Available The jurisdiction of the International Court of Justice (ICJ under the Pact of Bogota (1948 is part of a system of norms attributing competenceto the referenced tribunal along with other means of settlement. The system sets out principles and general exceptions applicable to all the means of peaceful settlement embodied in the Pact. This study will topic relates to the theory of dispute settlement and treaty interpretation hemispheric politics and diplomacy.

  12. LA DEFORESTACIÓN DEL BOSQUE SIEMPRE VERDE EN SOROA CANDELARIA, ARTEMISA, CUBA THE DEFORESTATION OF THE EVERGREEN FOREST IN SOROA CANDELARIA, ARTEMISA, CUBA

    Directory of Open Access Journals (Sweden)

    Seidel González Díaz

    2011-06-01

    Full Text Available La acción depredadora del hombre ha incidido en la desaparición de especies que identifican al bosque siempre verde. Este artículo demuestra el efecto de la deforestación del bosque en la comunidad de Soroa del municipio Candelaria, Artemisa, Cuba así como las potencialidades existentes en el área para revertir la actual situación, desde una perspectiva económica, social y ambiental. El objetivo es evaluar la incidencia de la proximidad a la comunidad sobre la afectación de las especies del bosque siempre verde en Soroa. Se seleccionaron al azar 20 parcelas en las cuales se contabilizó la abundancia de especies forestales, midiéndose también la distancia hasta la comunidad y el diámetro de árboles y arbustos. Se aplicó la regresión logística binaria para estimar la probabilidad de encontrar una proporción superior al 25% de las especies características de la zona, se calcularon los índices de diversidad y equidad, en los estratos arbóreos y arbustivos que fueron comparados con la aplicación de la prueba de rangos con signos de Wilcoxon. Se formaron así dos grupos, uno en que la distancia desde la comunidad es inferior a 2,5 km y el otro para una distancia mayor o igual a 2,5 km. Se realizó la prueba U de Mann Whitney para comparar los diámetros en los dos grupos, demostrándose con ello que la actividad antrópica es una de las causas que incide en la deforestación del bosque siempre verde del macizo montañoso en Candelaria.The negative man’s action on the forest has impacted in the disappearance of many species that belong to the evergreen forest. The present investigation demonstrate the grade of interference on the forest in the community of Soroa, Candelaria, Artemisa, Cuba and the existent potentialities in the area to revert this situation, from an economic, social and environmental perspective. The objective is to evaluate the influence of the proximity to community in the affectation of species to the

  13. Determinación del requerimiento hídrico del pimentón en el municipio de Candelaria, departamento del Valle del Cauca Water requeriments of pepper in Candelaria, Valle del Cauca, Colombia

    National Research Council Canada - National Science Library

    Adriana Gómez Enríquez; Hernán Rojas Palacios; Franco Alirio Vallejo Cabrera; Edgar Iván Estrada Salazar

    2010-01-01

    Se realizó un ensayo con el fin de determinar el requerimiento hídrico del pimentón Capsicum annuum variedad Unapal-Serrano, en la zona de Candelaria-Valle del Cauca (Colombia). Se determinó que el...

  14. The boundaries of poverty in Bogota

    Directory of Open Access Journals (Sweden)

    Consuelo Uribe Mallarino

    2016-07-01

    Full Text Available The article proposes an analytical perspective on poverty with a multidimensional approach, not only as an aggregate of variables and indicators, but also using a probing strategy that considers the way in which it is perceived between the groups receiving programs to alleviate poverty or use subsidized public services, and those without. Based on tools for quantitative and qualitative analysis applied to data collected on a sample of residents of Bogota, the authors analyze how the boundaries of sense on poverty are related to both objective and subjective factors related to being or not users of these programs, socioeconomic and educational conditions, as well as political participation, degree of association and use of mechanisms to enforce civil rights.

  15. Tectonic activity revealed by morphostructural analysis: Development of the Sierra de la Candelaria range, northwestern Argentina

    Science.gov (United States)

    Barcelona, H.; Peri, G.; Tobal, J.; Sagripanti, L.; Favetto, A.

    2014-12-01

    The tectonically active broken foreland of NW Argentina is a recent analog of the eastern margin of the Puna plateau during Mio-Pliocene times and likely of other broken forelands worldwide. In order to evaluate active tectonism in the broken foreland of the NW Argentine Andes, we examined the complex geomorphology in the vicinity of the basement-cored Sierra de la Candelaria range at ˜26°S and deciphered multiple episodes of crustal deformation spanning the Pliocene to the Quaternary. Digital elevation models, satellite images and geological data within a GIS environment allowed us to analyze the terrain, drainage networks, river dynamics and structure, as well as to obtain detailed geomorphological mapping, active tectonic indices, longitudinal river profiles and structural sections. Three morphostructural segments were defined based on the structural features, the differential vertical dissection pattern over the basement, the faulted Pliocene to recent deposits, the stepwise propagation of anticlines and the distortion over the fluvial system. By combining the several lines of evidence, we concluded that the Sierra de la Candelaria range was subjected to a multi-stage development. The first stage uplifted the central segment concomitant with the formation of the surrounding ranges and with the main partition phase of the foreland. After a significant time lapse, the mountain range was subjected to southward thick-skinned growth and northward growth via stepwise thin-skinned deformation and exerted control over the dynamics of the Río Rosario. Taking into account the surrounding basins and ranges of the Sierra de la Candelaria, the southern Santa Bárbara System is characterized by partially isolated intramontane basins (Choromoro and Rosario) limited by shielded ranges that caused moisture block and shows continuous deformation. These features were related to early stages of a broken foreland evolution model and modern analogs were found at the northern

  16. FT-Raman spectroscopy of the Candelaria and Pyxine lichen species: A new molecular structural study

    Science.gov (United States)

    Fernandes, Rafaella F.; Ferreira, Gilson R.; Spielmann, Adriano A.; Edwards, Howell G. M.; de Oliveira, Luiz Fernando C.

    2015-12-01

    In this work the chemistry of the lichens Candelaria fibrosa and Pyxine coccifera have been investigated for the first time using FT-Raman spectroscopy with the help of quantum mechanical DFT calculations to support spectral band assignments. The non-destructive spectral vibrational analysis provided evidence for the presence of pulvinic acid derivatives and conjugated polyenes, which probably belong to a carotenoid with characteristic signatures at ca. 1003, 1158 and 1525 cm-1 assigned respectively to δ(C-CH3), ν(C-C) and ν(Cdbnd C) modes. The identification of features arising from chiodectonic acid in the Pyxine species and calycin and pulvinic dilactone pigments in C. fibrosa were assisted by the quantum mechanical DFT calculations. Raman spectroscopy can provide important spectroscopic data for the identification of the biomarker spectral signatures nondestructively for these lichen pigments without the need for chemical extraction processes.

  17. Largest clinic in the world? (Bogota).

    Science.gov (United States)

    1971-01-01

    The IPPF member, the Asociacion Pro-Bienestar de la Familia Colombiana (Profamilia), is discussed and its clinic, the Pilot Center in Bogota, reputed to be the largest family clinic in the world, is described. From January 1966 until the end of 1970, the Pilot Center served 59,469 new acceptors. Of the 31 Profamilia clinics in Colombia, the Pilot Center was visited by 22% of all new acceptors during 1970. Profamilia established the first vasectomy clinic in Latin America in February 1970. By the end of 1970, 92 vasectomies had been performed. Profamilia has expanded its family planning program, and part of this expansion is a result of Profamilia's extensive use of mass media in its education campaign. In 1970, there was a 24% increase in new acceptors over 1969 and a 66% increase in follow-up visits. 62,292 radio spots and 7 television programs were broadcast and announcements about family planning were shown in public cinemas in the latter half of 1970. Nearly 300,000 women attended talks, meetings, and film shows on family planning, and approximately 2 million leaflets and information sheets were distributed. To increase community involvement, Profamilia held 26 short courses for various groups including religious and community leaders. Profamilia also conducted a training course for doctors and sociologists from Colombia and other Latin American countries.

  18. Memoria y vanguardia en el teatro la candelaria a propósito de su quincuagésimo aniversario

    Directory of Open Access Journals (Sweden)

    Catalina Esquivel

    2016-01-01

    Full Text Available Este texto quiere atender la producción más reciente del teatro La Candelaria de Bogotá. Durante la primera década del s. XXI, La Candelaria se vincula a las prácticas del teatro posmoderno y especialmente a las que tienen que ver con un teatro de lo real. La investigación considera que el pasado histórico del grupo se traduce en una memoria que interviene necesariamente en la apropiación de un teatro autorreferencial y posdramático, produciendo una poética particular, cuya característica esencial es una tensión entre pasado y presente.

  19. MOVILIDAD, AMBIENTE Y CENTROS HISTÓRICOS: UNA REFLEXIÓN A PROPÓSITO DEL SECTOR DE LA CANDELARIA, BOGOTÁ D. C., COLOMBIA

    Directory of Open Access Journals (Sweden)

    Martínez de V. Beatriz

    2008-07-01

    Full Text Available Este artículo es producto de la primera revisión bibliográfica realizada para el desarrollo de la investigación “Movilidad sostenible en centros históricos de ciudades colombianas”, la cual busca incorporar a los estudios urbanos los conceptos de tecnología, movilidad, transporte y ambiente, con énfasis en el análisis del impacto de las tecnologías de transporte sobre el patrimonio edificado. El objetivo de este artículo es brindar al lector una visión panorámica sobre la temática planteada y hacer un llamado de atención sobre la pertinencia de iniciar una reflexión sobre la relación entre tecnología, movilidad, transporte, ambiente y patrimonio en los centros históricos. Se presenta inicialmente una breve referencia al contexto y al sector de La Candelaria, ubicado en el área suroriental de Bogotá D.C., Colombia, a 2.600 msnm, con una extensión de 188,12 Ha y declarado Monumento Nacional en 1963. Posteriormente, se presentan algunas anotaciones sobre aspectos asociados a la movilidad y el transporte en Bogotá durante los siglos XIX y XX, y sobre los modos de transporte y sus efectos en el ambiente y el patrimonio. Finalmente se hace una breve descripción de algunos proyectos, planes y estudios de movilidad y transporte realizados a propósito de la búsqueda de soluciones a los problemas que se ocasionan en el centro histórico por efecto de las tecnologías de transporte.

  20. [Medication use among older adults in Bogota, Colombia].

    Science.gov (United States)

    Cano-Guitierrez, Carlos; Samper-Ternent, Rafael; Cabrera, Javier; Rosselli, Diego

    2016-01-01

    To determine the frequency and types of medication used by older adults living in the Colombian capital, Bogota, and to identify the use of potentially inappropriate medications according to the revised Beers criteria. Data were obtained from the health, welfare, and aging (SABE, Spanish: salud, bienestar y envejecimiento) study conducted in both urban and rural areas of Bogota in 2012. The Mann-Whitney U test was used to analyze sex-related differences in the number of medications used among age-stratified subgroups. Of 2 000 subjects, 1,268 (63.4%) were women; furthermore, 1,514 (75.7%) of the total participants had ≤5 years of basic education. The self-reported prevalence rates of hypertension and diabetes were 56.9% and 17.5%, respectively. The average number of medications per subject was 3.24, and it was higher in women (3.50) than in men (2.79). A total of 549 subjects (27.4%) reported using ≥5 medications. Only 311 subjects (15.6%) reported not using any medication. According to the Beers criteria, 443 (6.9%) of the medications were potentially inappropriate. The use of inappropriate medications is a major problem among older adults in Bogota. Further studies should identify factors that increase the risks of polypharmacy and inappropriate medication use and design interventions that would allow older adults to avoid these risks.

  1. Determinación del requerimiento hídrico del pimentón en el municipio de Candelaria, departamento del Valle del Cauca Water requeriments of pepper in Candelaria, Valle del Cauca, Colombia

    Directory of Open Access Journals (Sweden)

    Adriana Gómez Enríquez

    2010-10-01

    Full Text Available Se realizó un ensayo con el fin de determinar el requerimiento hídrico del pimentón Capsicum annuum variedad Unapal-Serrano, en la zona de Candelaria-Valle del Cauca (Colombia. Se determinó que el pimentón requiere 425mm de agua durante su ciclo vegetativo, obteniendo una eficiencia del uso del agua de 5.32 kg/m³ de fruto fresco y de 0.5 kg/m³ en términos de materia seca. Además, se comprobó la eficiencia del microevaporímetro 'MIEVHR' como herramienta para programación del riego y estudios hidrológicos.A trial was carried out in order to determining the water requirement of the pepper Capsicum annuum variety UNAPAL- Serrano in the zone of Candelaria -Valley of the Cauca (Colombia and to evaluate the efficiency of the microevaporímeter 'MIEVHR' as estimator of the evaporation. It was determined that the pepper requires 425mm of water during the cycle vegetative obtaining an efficiency of the use of the water of 5.32 Kg/m³ of fresh fruit and 0.5 kg/m³ in terms of dry matter. Besides, it was verified the microevaporímeter efficiency 'MIEVHR' as tool for programming of the irrigation.

  2. Results of Global Youth Tobacco Surveys in Public Schools in Bogota, Colombia

    Science.gov (United States)

    Pardo, Constanza; Pineros, Marion; Jones, Nathan R.; Warren, Charles W.

    2010-01-01

    Background: The purpose of this paper is to use data from the Global Youth Tobacco Survey (GYTS) conducted in Bogota, Colombia, in 2001 and 2007 to examine changes in tobacco use among youth 13-15 years of age. The current tobacco control effort in Bogota will be accessed relative to Colombia ratifying the World Health Organization Framework…

  3. Determinación del requerimiento hídrico del pimentón en el municipio de Candelaria, departamento del Valle del Cauca

    National Research Council Canada - National Science Library

    Adriana Gómez Enríquez; Hernán Rojas Palacios; Franco Alirio Vallejo Cabrera; Edgar Iván Estrada Salazar

    2010-01-01

      Se realizó un ensayo con el fin de determinar el requerimiento hídrico del pimentón Capsicum annuum variedad Unapal-Serrano, en la zona de Candelaria-Valle del Cauca (Colombia). Se determinó...

  4. Evaporite deposits of Bogota area, Cordillera Oriental, Colombia

    Science.gov (United States)

    McLaughlin, Donald H.

    1972-01-01

    Four evaporite-bearing stratigraphic zones are known in Cretaceous strata of the Cordillera Oriental of Colombia north and east of Bogota. The easternmost and oldest zone is probably of Berriasian to Valanginian age. The next oldest is probably late Barremian to early Aptian in age. The third appears to be Aptian. The westernmost and best known sequence in the Sabana de Bogota is Turonian to early Coniacian in age. This youngest sequence contains the thickest salt deposits known in Colombia and is probably the most widespread geographically. Most of the rock salt exposed in the three accessible mines (at Zipaquira, Nemocon, and Upin) has a characteristic lamination of alternating slightly argillaceous and highly argillaceous salt layers of varied but moderate thickness. Black, calcareous claystone, commonly very pyritic, is interbedded conformably with the laminated salt in many places throughout the deposits. Fragments of black claystone derived from the thinner interbeds are ubiquitous in all deposits, both as concordant breccia zones and as isolated clasts. Anhydrite is scarce at Zipaquira and apparently even rarer at Nemocon and Upin. Gypsum is produced at three small deposits in the oldest evaporite zone where it probably was concentrated by leaching of salt initially associated with it. The two intervening evaporite zones are not exposed, but their existence and distribution are indicated by brine springs and locally by "rute," a distinctive black, calcareous mud formed by the leaching of salt beds. Fossils show that the youngest salt-claystone zone, in the Sabana de Bogota, is contemporary with associated hematitic sandstone and siltstone, and with carbonaceous and locally coaly claystone. Although evidence is poor, this same facies relation probably exists within the other three evaporite zones. All salt deposits in this study probably are associated with anticlines, a relation best exemplified by the deposits on the Sabana de Bogota. Within these

  5. Protected areas in the city,urban wetlands of Bogota

    Directory of Open Access Journals (Sweden)

    Diana Marcela Sandoval Rincón

    2013-06-01

    Full Text Available This article analyses the environmental ideologies on how to manage protected areas, specifically what ideologies may be applied when protected areas are within a city. Analysing the conservationist and preservationist discourses and the different types of community participation will give a wide view on possibilities of management for protected areas. Its main interest is to understand which ideologies were applied for protected areas in Bogota according to the Spatial Development Plan, and how it affected environmental management strategies of wetlands in the city. The case study of Córdoba Wetland will be analysed according to its policies and participation opportunities in order to guaranty sustainability.

  6. Gentrificación de La Candelaria: reconfiguraciones de lugar de residencia y consumo de grupos de altos ingresos

    Directory of Open Access Journals (Sweden)

    Adrian Smith Manrique Gómez

    2013-01-01

    Full Text Available El sector de La Candelaria (Bogotá D. C., Colombia ha vuelto a ser un lugar de consumo y residencia de grupos de personas de altos ingresos económicos, luego de su abandono a mediados del siglo XX por efecto de múltiples problemáticas urbanas. Esta dinámica de relocalización es conocida por la geografía urbana como gentrificación; tendencia previamente registrada en otras urbes e integrante del proceso global de construcción urbana. El artículo ofrece una lectura de dicha dinámica urbana bogotana a partir del análisis de sus causas, el seguimiento a su funcionamiento y sus consecuencias.

  7. Ruta del 48: proyecto turístico etnocultural en la Cuenca alta del Río Candelaria-Costa Rica

    Directory of Open Access Journals (Sweden)

    Susan Solís

    2011-10-01

    Full Text Available The writing is a strategy of integration and marketing of the cultural and natural values of the communities located in the Fact high of the river Candelaria in Costa Rica. In that fabric, stresses the proposal of a tourist route ethno-cultural, to seize responsibly, the cultural and natural resources own the place. It is portrayed as an alternative to generate sustainable activities, since the inhabitants are actors and beneficiaries of the local management

  8. The relationship between mobility and public space. Transmilenio in Bogota

    Directory of Open Access Journals (Sweden)

    Myriam Stella Díaz Osorio

    2016-04-01

    Full Text Available Las relaciones entre la movilidad y el espacio público. Transmilenio en BogotáResumenEl desarrollo urbano de las ciudades ha estado ligado al desarrollo de los sistemas de movilidad, destacando aspectos relacionados con la extensión territorial, la funcionalidad, la estética, la experiencia de viaje, entre otros. De esta manera, las dos estructuras definen el paisaje urbano que será apreciado por los habitantes. En el presente artículo se expondrán los intereses, las prácticas y los alcances del semillero espacio público y movilidad urbana, que buscan identificar las relaciones existentes entre las estructuras del sistema de Movilidad Transmilenio, en Bogotá, y el espacio público adyacente a dicha estructura. Se determinará el marco conceptual para la investigación, seguido de la presentación del análisis del caso Transmilenio a través de herramientas de registro e interpretación de las situaciones relacionadas con el espacio público y la estructura de movilidad, identificando las relaciones existentes.Palabras claves: desarrollo urbano, vida urbana, transporte público, espacio urbano.The relationship between mobility and public space. Transmilenio in BogotaAbstractThe urban development of cities has been linked to the development of mobility systems, highlighting issues related to territorial extent, functionality, aesthetics, the experience of travel, among others. Thus, two structures define the urban landscape that will be appreciated by its inhabitants. In this article the interests, practices and scope of the research hotbed in public space and urban mobility, which seek to identify the relationships between the structures of the mobility system Transmilenio in Bogota, and the adjacent public space to that structure will be shown. The conceptual framework for research will be determined, followed by the presentation of the Transmilenio case analysis through logging tools and interpretation of situations related to

  9. Three essays on urban spatial structure in Bogota D.C.

    OpenAIRE

    Avendaño Arosemena, José

    2013-01-01

    Descripció del recurs: 16 oct. 2013 Las ciudades son sistemas físicos, económicos y sociales caracterizados fundamentalmente por una elevada concentración espacial de población y empleo. Aunque la configuración de los sistemas urbanos presenta importantes particularidades alrededor del mundo, la economía ha logrado, con relativo éxito, organizar una estructura conceptual que permite identificar y explicar algunas fuerzas que conllevan a la concentración espacial de la población. Los trabaj...

  10. AGLOMERACIÓN INDUSTRIAL EN EL AREA METROPOLITANA DE BOGOTA D.C.

    Directory of Open Access Journals (Sweden)

    MARCO ANTONIO DUEÑAS ESTERLING

    2009-01-01

    Full Text Available La aglomeración industrial es uno de los factores que favorecen el crecimiento económico de las naciones. El presente trabajo muestra algunos resultados empíricos que buscan determinar la existencia de aglomeraciones industriales en Bogotá junto con sus municipios aledaños. La metodología usada está basada en el modelo de aglomeración industrial "tablero de dardos" presentado por Ellison y Glaeser (1997. Para ello se tomaron microdatos del año 2005 de la Encuesta Anual Manufacturera (EAM del Departamento Administrativo Nacional de Estadística (DANE y se determinó la localidad de cada establecimiento. Así, tomando las variables localidad y empleo fue posible calcular el índice de aglomeración para cada industria definida en la tercera revisión del código de Clasificación Industrial Internacional Uniforme (CIIU. Los resultados revelan que en promedio no es posible hablar de gran aglomeración industrial en el Área Metropolitana de Bogotá.

  11. Reproductive health clinic raided and closed in Bogota, Colombia.

    Science.gov (United States)

    1995-01-27

    On December 17, armed criminal investigative forces acting under the direction of Colombia's secretary and deputy secretary of health, brutally raided the main clinic of the Orientame reproductive health care federation in Bogota, Colombia. Allegedly responding to charges that the clinic was providing abortions, investigators entered the clinic without warning, brandishing automatic weapons. Once inside, they threatened and physically assaulted patients and clinic staff, destroyed office equipment, broke down doors, and ordered the clinic to close. Since its founding in 1977, Orientame has become Colombia's second largest non-governmental family planning organization. The federation, consisting of three clinics, provides a full range of obstetric, gynecological, and information services, including family planning counseling, cancer screening, treatment for sexually transmitted diseases, prenatal care, adoption placement and counseling, and treatment of incomplete abortion. Serving approximately 250,000 women in its 17 years of operation, Orientame has a sliding fee scale and often waives costs for women who are unable to pay. Were Orientame to close its doors permanently, women facing complications from unsafe abortions but unable to pay private doctors would be forced to go to public hospitals and risk arrest. Despite the country's prohibition of abortions not necessary to save a woman's life, an estimated 288,400 Colombian women underwent abortions in 1989; 57,680 were hospitalized for complications from unsafe or incomplete procedures. full text

  12. Early Cretaceous U-Pb zircon ages for the Copiapó plutonic complex and implications for the IOCG mineralization at Candelaria, Atacama Region, Chile

    Science.gov (United States)

    Marschik, Robert; Söllner, Frank

    2006-12-01

    Four of the major plutons in the vicinity of the Candelaria mine (470 Mt at 0.95% Cu, 0.22 g/t Au, 3.1 g/t Ag) and a dike-sill system exposed in the Candelaria open pit have been dated with the U-Pb zircon method. The new geochronological data indicate that dacite magmatism around 123 Ma preceded the crystallization of hornblende diorite (Khd) at 118 ± 1 Ma, quartz-monzonite porphyry (Kqm) at 116.3 ± 0.4 Ma, monzodiorite (Kmd) at 115.5 ± 0.4 Ma, and tonalite (Kt) at 110.7 ± 0.4 Ma. The new ages of the plutons are consistent with field relationships regarding the relative timing of emplacement. Plutonism temporally overlaps with the iron oxide Cu-Au mineralization (Re-Os molybdenite ages at ˜115 Ma) and silicate alteration (ages mainly from 114 to 116 and 110 to 112 Ma) in the Candelaria-Punta del Cobre district. The dated dacite porphyry and hornblende diorite intrusions preceded the ore formation. A genetic link of the metallic mineralization with the quartz-monzonite porphyry and/or the monzodiorite is likely. Both of these metaluminous, shoshonitic (high-K) intrusions could have provided energy and contributed fluids, metals, and sulfur to the hydrothermal system that caused the iron oxide Cu-Au mineralization. The age of the tonalite at 110.7 Ma falls in the same range as the late alteration at 110 to 112 Ma. Tonalite emplacement may have sustained existing or driven newly developed hydrothermal cells that caused this late alteration or modified 40Ar/39Ar and K/Ar systematic in some areas.

  13. Ruta del 48: proyecto turístico etnocultural en la Cuenca alta del Río Candelaria-Costa Rica

    Directory of Open Access Journals (Sweden)

    Susan Solís

    2011-01-01

    Full Text Available El escrito trata de una estrategia de integración y comercialización de los valores culturales y naturales de las comunidades ubicadas en la Cuenca alta del río Candelaria en Costa Rica. En ese entramado, destaca una ruta turística etnocultural, que aprovecha de manera responsable, los recursos culturales y naturales propios del lugar. Pues se perfi la como alternativa para generar actividades sostenibles, ya que los habitantes son actores y benefi ciarios de la gestión local.

  14. El Papel de las Instituciones Culturales en el proceso de Gentrificación del Barrio La Candelaria de Bogotá: Un Estudio de Caso.

    OpenAIRE

    Leyva Townsend, Nicolás

    2015-01-01

    El presente texto busca examinar el papel que desempeñan las Instituciones Culturales dentro del proceso de gentrificación vigente en la localidad de La Candelaria, Bogotá. Para ello propongo una revisión crítica de la bibliografía pertinente, y usarla como apoyo en el análisis del caso. Primero estableceré un marco teórico para el fenómeno urbano de la gentrificación, un concepto de origen anglosajón que necesita de ciertas reinterpretaciones al momento de usarlo para pensar las ciudades Lat...

  15. Identification of Native Bacteria of the Candelaria and Tatacoa Semiarid Zone, Capable of Withstanding a Mars UV Radiation Simulation

    Science.gov (United States)

    Mendez, Y.; Vives, M.

    2017-07-01

    This work is the first study to describe native bacteria from the semi-arid areas in Candelaria and Tatacoa in Colombia, able to withstand a simulation of UV radiation, in order to draw an analogy with microbial growth on the surface of Mars. Sampling was carried out in the areas mentioned taking 50 samples of sediment divided into 25 samples of surface and 25 deep samples. As soon as the samples were transferred, they were subjected to a test of UV radiation in an atmospheric simulation chamber designed for the experiment, for periods of 1, 6 and 12 hours of exposure. Microbiological analysis as a method of plate dilution and isolation were performed using the modified AIS growth medium, macroscopic and microscopic description of morphotypes, biochemical identification of the morphotypes found, extraction of the feasible mycelium, DNA extraction and amplification of the gene 16 S by PCR. 13 morphotypes of bacteria resistant to UV radiation were found, mostly compatible with the gender of Streptomyces. One of the morphotypes found resisted 12 hours exposure. Molecular analyzes did not produce any results, because it was not possible to amplify the 16S by PCR, this may be due to that the exposure to UV radiation can degrade the DNA in existence, a affecting the results. The finding of native bacteria capable of withstanding conditions UV radiation can give us an approximation of microbial growth, mechanisms of resistance and survival under extreme conditions such as those found on Mars, in order to develop biotechnological applications and establish planetary analogues to understand the origin and evolution of the universe.

  16. Air Pollution alongside Bike-Paths in Bogota - Colombia

    Directory of Open Access Journals (Sweden)

    Juan Felipe Franco

    2016-11-01

    Full Text Available The study we present in this paper aims at characterizing the range of fine particulate matter (PM2.5 and black carbon (BC concentrations to which bike-path users in Bogotá are exposed to. Using a bike equipped with a DustTrak and a micro-aethalometer we measured PM2.5 and BC concentration levels along bike-paths corridors, during weekdays and weekends. Experiments were conducted in fours streets, representing four typical configurations of bike-paths in the city. Traffic data for workdays was also available from local mobility authority. Results indicate that bike-paths users in Bogota are exposed to air pollution levels far exceeding the threshold values established as potentially dangerous for human health. Average concentrations for PM2.5 ranged between 80 and 136 ug/m3 in workdays and between 30 and 72 ug/m3 in weekends. BC mean concentrations were between 16 and 38 µg/m3 during workdays and in the range 10 to 32 µg/m3 during weekends. A statistically significant difference exists in the levels of pollutants concentrations measured during workdays and weekends for all the considered bike paths. According to our results, both traffic volume and diffusions conditions, which are affected by many factors including street geometry, affect bike-path user’s exposure levels. Taking into account the important role that bicycling is playing as an alternative transport mode in Latin American cities, we consider these results provide useful insights to increase the appreciation of the excessive bikers´ exposure to air pollution in Bogotá. Moreover, these findings contribute with technical elements that should lead to the inclusion of air quality variable when designing and planning sustainable urban mobility infrastructures.

  17. Alcohol, Tobacco, and Other Psychoactive Drug Use among High School Students in Bogota, Colombia.

    Science.gov (United States)

    Perez, Miguel A.; Pinzon-Perez, Helda

    2000-01-01

    Investigated health behaviors practiced by 10th graders in Bogota, Colombia. Data from a modified version of the Youth Risk Behavior Survey indicated that there was a high use of gateway substances (tobacco and alcohol) among respondents, but lower usage, when compared to U.S. students, of other mind-altering substances such as marijuana,…

  18. More Carrots than Sticks: Antanas Mockus's Civic Culture Policy in Bogota

    Science.gov (United States)

    Buendia, Felipe Cala

    2010-01-01

    The son of a Lithuanian artist, Antanas Mockus was the president of the National University in Colombia before he became mayor of Bogota in 1995. As mayor, he transformed the city into a huge classroom, not only bringing to his administration a new view of governing but also transforming the way people exercised their citizenship. Mockus resorted…

  19. Adolescents' Expectations for Higher Education in Bogota, Colombia, and La Paz, Bolivia

    Science.gov (United States)

    Forste, Renata; Heaton, Tim B.; Haas, David W.

    2004-01-01

    Drawing on status attainment models, the authors examine the effects of family, peer, and school factors on expectations to graduate from a university for a sample of high school students in Bogota, Colombia, and La Paz, Bolivia. The expansion of higher education in these countries has followed different strategies. In Bolivia, the policy has been…

  20. Gestational and congenital toxoplasmosis in two hospitals in Bogota, Colombia

    Directory of Open Access Journals (Sweden)

    Edith Angel-Müller

    2014-04-01

    Full Text Available Background. Gestational toxoplasmosis is acquired during pregnancy and involves a risk of the parasite crossing the placenta, thereby leading to foetal infection, which can lead to serious sequelae in children, mainly chorioretinitis, cerebral calcification, hydrocephalus and intellectual disability. Objective. Determining the prevalence of maternal and neonatal toxoplasmosis in women attending the Engativa and La Victoria hospitals in Bogota, Colombia, for delivery. Correlating the results with those of a national multicentre study. Determining IgM and IgA anti-toxoplasma prevalence in newborn (NB umbilical cord blood. Materials and methods. This was a cohort study, which was approved by the participating institutions' ethics committees. The patients signed informed consent forms and filled out a survey requesting demographic and prenatal care data. A blood sample was taken from the umbilical cord on delivery for determining anti-toxoplasma IgM. Anti-toxoplasma IgA was also measured in a subset of patients. Children suspected of having either clinical or serological congenital toxoplasmosis were followed-up for 12 months. Results. The study involved taking 3,224 NB umbilical cord blood samples between April 1st 2009 and July 16th 2010. Positive anti-toxoplasma IgG was found in 28.2% of pregnant women (26.1-29.8 95%CI. Anti-toxoplasma IgM was determined in 558 pregnant women and found positive in 34 patients (i.e. 1.1 per 100 NB gestational toxoplasmosis incidence. Nine blood samples were positive (7 for IgM and 2 for IgA. Five of the NB studied (0.15% were positive for IgG after 12 months' follow-up, thereby confirming a diagnosis of congenital toxoplasmosis accounting for 1 in every 645 live births. Conclusion. This study showed that 70% of the pregnant women were not infected with T. gondii in the chosen hospitals in Bogotá. Gestational toxoplasmosis frequency was around 1% and 0.6% for congenital toxoplasmosis.

  1. AISLAMIENTO Y CARACTERIZACIÓN DE CEPAS DE Staphylococcus ENTEROTOXIGÉNICOS AISLADOS DE QUESOS EN BOGOTA

    National Research Council Canada - National Science Library

    María Vanegas L; Lina González G; Aida Martínez L; Francisco Buitrago

    2008-01-01

    Objetivo. Caracterizar cepas de Staphylococcus aureus enterotoxigénicos provenientes de quesos distribuidos en supermercados, tiendas y en ventas callejeras en la ciudad de Bogota, Colombia. Materiales y métodos...

  2. Nucleotide sequence analysis of Adh genes estimates the time of geographic isolation of the Bogota population of Drosophila pseudoobscura.

    Science.gov (United States)

    Schaeffer, S W; Miller, E L

    1991-01-01

    The population of Drosophila pseudoobscura at Bogota, Columbia, is geographically and partially reproductively isolated from populations in the main body of the species in North America. The degree of genetic differentiation and time of divergence between populations at Bogota and Apple Hill, CA, were estimated by comparison of 3388 nucleotides in the alcohol dehydrogenase region (Adh and Adh-Dup genes) of 18 strains. Of the 146 polymorphic nucleotide sites detected, 68 and 31 were unique to the Apple Hill and Bogota samples, respectively, and 53 were shared. On the basis of an observed net divergence per nucleotide site of 0.264% between the two samples, the Bogota and North American populations were estimated to have been separated for at least 155,000 years. This divergence time suggests that D. pseudoobscura extended its range from North America to South America in a period of Pleistocene glaciation, when habitat suitable for the species presumably existed in lowland Central America. PMID:2068088

  3. Laguna de Términos/Río Candelaria Core: Conditions of Sustainable Urban Occupation in the Interior of the Yucatán Peninsula

    Directory of Open Access Journals (Sweden)

    Joel D. Gunn

    2012-01-01

    Full Text Available Pursuit of a link between the collapse of Maya civilization and climate is a subject that has been revisited periodically for nearly a century. In the 1980s, we began to develop a climatic, paleoclimatic, and ethnographic model of horticultural production that would sustain urban life in an environment fundamentally hostile to large population aggregates. Our focus is on the appropriate conditions for the success of civilization, measured by architectural fluorishing, in the interior upland basins of the Yucatán Peninsula. To this we have added new research linking the now-collapsed interior cities and their bajo environments to near-shore deposits at the mouths of rivers. This study is based on the Candelaria River watershed of the southwestern Maya Lowlands in the modern Mexican state of Campeche. Campeche is separated from other regions of the Yucatán Peninsula by hills up to 400 m elevation. These elevated interior lands create important rain shadow effects, limitations on land use, and divide the landscape into valleys and basins. Past climates, local geography, and horticultural customs appear to be important to the success of civilizations in the interior. Results of the recent coring efforts suggest that the Maya of the Candelaria watershed controlled erosion during the period of greatest population, but lost control of it due to the ninth century drought and population dislocations.La búsqueda de un eslabón que sirva de enlace entre el colapso de la civilización maya y el clima ha sido retomada periódicamente durante casi un siglo de estudios. Durante la década de los ochenta, comenzamos a desarrollar un modelo climático, paleoclimático y etnográfico de producción hortícola que ayudaría a sustentar un núcleo de vida urbana en un ambiente fundamentalmente hostil a grandes conjuntos de poblaciones. El objetivo de este estudio consiste en tratar de encontrar las condiciones apropiadas para el éxito de un núcleo de

  4. Determinación del requerimiento hídrico del pimentón en el municipio de Candelaria, departamento del Valle del Cauca

    Directory of Open Access Journals (Sweden)

    Estrada Salazar Edgar Iván

    2010-12-01

    Full Text Available Se realizó un ensayo con el fin de determinar el requerimiento hídrico del pimentón Capsicum annuum variedad Unapal-Serrano, en la zona de Candelaria-Valle del Cauca (Colombia. Se determinó que el pimentón requiere 425mm de agua durante su ciclo vegetativo, obteniendo una eficiencia del uso del agua de 5.32 kg/m3 de fruto fresco y de 0.5 kg/m3 en términos de materia seca. Además, se comprobó la eficiencia del microevaporímetro "MIEVHR" como herramienta para programación del riego y estudios hidrológicos.

  5. Determinación del requerimiento hídrico del pimentón en el municipio de Candelaria, departamento del Valle del Cauca

    Directory of Open Access Journals (Sweden)

    Adriana Gómez Enríquez

    2010-10-01

    Full Text Available Se realizó un ensayo con el fin de determinar el requerimiento hídrico del pimentón Capsicum annuum variedad Unapal-Serrano, en la zona de Candelaria-Valle del Cauca (Colombia. Se determinó que el pimentón requiere 425mm de agua durante su ciclo vegetativo, obteniendo una eficiencia del uso del agua de 5.32 kg/m³ de fruto fresco y de 0.5 kg/m³ en términos de materia seca. Además, se comprobó la eficiencia del microevaporímetro 'MIEVHR' como herramienta para programación del riego y estudios hidrológicos.

  6. Advanced DC/DC converters

    CERN Document Server

    Luo, Fang Lin

    2003-01-01

    INTRODUCTIONHistorical ReviewMultiple Quadrant ChoppersPump CircuitsDevelopment of DC/DC Conversion TechniqueCategorize Prototypes and DC/DC Converters Family TreeVOLTAGE-LIFT CONVERTERSIntroductionSeven Self-Lift ConvertersPositive Output Luo-ConvertersNegative Output Luo-ConvertersModified Positive Output Luo-Converters Double Output Luo-ConvertersPOSITIVE OUTPUT SUPER-LIFT LUO-CONVERTERS IntroductionMain SeriesAdditional SeriesEnhanced Series Re-Enhanced Series Multiple-Enhanced Series Summary of Positive Output

  7. DC + RSL

    DEFF Research Database (Denmark)

    Haxthausen, Anne

    1996-01-01

    This document gives some initial ideas of how the Duration Calculus (DC) can be integrated with the RAISE Specification Language (RSL).......This document gives some initial ideas of how the Duration Calculus (DC) can be integrated with the RAISE Specification Language (RSL)....

  8. A Sub-category Disaggregated Greenhouse Gas Emission Inventory for the Bogota Region, Colombia

    Science.gov (United States)

    Pulido-Guio, A. D.; Rojas, A. M.; Ossma, L. J.; Jimenez-Pizarro, R.

    2012-12-01

    Several international organizations, such as UNDP and UNEP, have recently recognized the importance of empowering sub-national decision levels on climatic governance according to the subsidiarity principle. Regional and municipal authorities are directly responsible for land use management and for regulating economic sectors that emit greenhouse gases (GHG) and are vulnerable to climate change. Sub-national authorities are also closer to the population, which make them better suited for educating the public and for achieving commitment among stakeholders. This investigation was developed within the frame of the Regional Integrated Program on Climate Change for the Cundinamarca-Bogota Region (PRICC), an initiative aimed at incorporating the climate dimension into the regional and local decision making. The region composed by Bogota and its nearest, semi-rural area of influence (Province of Cundinamarca) is the most important population and economic center of Colombia. Our investigation serves two purposes: a) to establish methodologies for estimating regional GHG emissions appropriate to the Colombian context, and b) to disaggregate GHG emissions by economic sector as a mitigation decision-making tool. GHG emissions were calculated using IPCC 1996 - Tier 1 methodologies, as there are no regional- or country-specific emission factors available for Colombia. Top-Down (TD) methodologies, based on national and regional energy use intensity, per capita consumption and fertilizer use, were developed and applied to estimate activities for following categories: fuel use in industrial, commercial and residential sectors (excepting NG and LPG), use of ozone depleting substances (ODS) and substitutes, and fertilizer use (for total emissions of agricultural soils). The emissions from the remaining 22 categories were calculated using Bottom-Up (BU) methodologies given the availability of regional information. The total GHG emissions in the Cundinamarca-Bogota Region on 2008 are

  9. Genetic architecture of male sterility and segregation distortion in Drosophila pseudoobscura Bogota-USA hybrids.

    Science.gov (United States)

    Phadnis, Nitin

    2011-11-01

    Understanding the genetic basis of reproductive isolation between recently diverged species is a central problem in evolutionary genetics. Here, I present analyses of the genetic architecture underlying hybrid male sterility and segregation distortion between the Bogota and USA subspecies of Drosophila pseudoobscura. Previously, a single gene, Overdrive (Ovd), was shown to be necessary but not sufficient for both male sterility and segregation distortion in F(1) hybrids between these subspecies, requiring several interacting partner loci for full manifestation of hybrid phenomena. I map these partner loci separately on the Bogota X chromosome and USA autosomes using a combination of different mapping strategies. I find that hybrid sterility involves a single hybrid incompatibility of at least seven interacting partner genes that includes three large-effect loci. Segregation distortion involves three loci on the Bogota X chromosome and one locus on the autosomes. The genetic bases of hybrid sterility and segregation distortion are at least partially--but not completely--overlapping. My results lay the foundation for fine-mapping experiments to identify the complete set of genes that interact with Overdrive. While individual genes that cause hybrid sterility or inviability have been identified in a few cases, my analysis provides a comprehensive look at the genetic architecture of all components of a hybrid incompatibility underlying F(1) hybrid sterility. Such an analysis would likely be unfeasible for most species pairs due to their divergence time and emphasizes the importance of young species pairs such as the D. pseudoobscura subspecies studied here.

  10. Management of public transport in Bogota in a context of sustainable development

    Energy Technology Data Exchange (ETDEWEB)

    Olivera, M.F.

    2001-07-01

    The transport system in Bogota, Bolivia, was transformed forever following several decisions made in the last three years. Those decisions concerned sustainable development, taking simultaneously into account people, the environment, and economics. Bogota is a chaotic city with a population of almost seven million people, 800,000 cars and an annual growth in excess of 5 per cent and the worst air pollution trends in Latin America. Numerous refugees crowd the city, coming from conflict areas and very low incomes. Drastic decisions can have a dramatic effect, even when it concerns simple issues. The selection of main corridors, the creation of a new state-owned enterprise devoted to massive transport organizations, open market calls for proposals for the operation of the system, competition in the field of different technologies, the improvement of diesel fuel and the promotion of natural gas, the construction of bike paths concurrently with no car days, restrictions of car circulation by days, and car emissions certification and control are some of the decisions that were made to transform the public transportation system in Bogota.

  11. Spatial and temporal disaggregation of transport-related carbon dioxide emissions in Bogota - Colombia

    Science.gov (United States)

    Hernandez-Gonzalez, L. A.; Jimenez Pizarro, R.; Néstor Y. Rojas, N. Y.

    2011-12-01

    As a result of rapid urbanization during the last 60 years, 75% of the Colombian population now lives in cities. Urban areas are net sources of greenhouse gases (GHG) and contribute significantly to national GHG emission inventories. The development of scientifically-sound GHG mitigation strategies require accurate GHG source and sink estimations. Disaggregated inventories are effective mitigation decision-making tools. The disaggregation process renders detailed information on the distribution of emissions by transport mode, and the resulting a priori emissions map allows for optimal definition of sites for GHG flux monitoring, either by eddy covariance or inverse modeling techniques. Fossil fuel use in transportation is a major source of carbon dioxide (CO2) in Bogota. We present estimates of CO2 emissions from road traffic in Bogota using the Intergovernmental Panel on Climate Change (IPCC) reference method, and a spatial and temporal disaggregation method. Aggregated CO2 emissions from mobile sources were estimated from monthly and annual fossil fuel (gasoline, diesel and compressed natural gas - CNG) consumption statistics, and estimations of bio-ethanol and bio-diesel use. Although bio-fuel CO2 emissions are considered balanced over annual (or multi-annual) agricultural cycles, we included them since CO2 generated by their combustion would be measurable by a net flux monitoring system. For the disaggregation methodology, we used information on Bogota's road network classification, mean travel speed and trip length for each vehicle category and road type. The CO2 emission factors were taken from recent in-road measurements for gasoline- and CNG-powered vehicles and also estimated from COPERT IV. We estimated emission factors for diesel from surveys on average trip length and fuel consumption. Using IPCC's reference method, we estimate Bogota's total transport-related CO2 emissions for 2008 (reference year) at 4.8 Tg CO2. The disaggregation method estimation is

  12. Cooking Food in Bogota Using a Box Cooker

    Directory of Open Access Journals (Sweden)

    Silvio Alejandro Jiménez Castellanos

    2015-10-01

    Full Text Available This paper aims to present the transient temperature field of a basic box type solar cooker (without attachments such as double glazing, internal reflectors, external reflectors, steam relief line, etc. for Bogotá – Colombia climate conditions, in order to determine if this device can cook on its town. The methodology consisted of three main stages: the development of a physical – mathematical model for heating process, based on energy balances for each of its components: glass container lid, container, absorber wall and fluid, the development of a computational experiment in the software Autodesk Algor Simulation and the comparison of the results. The final water temperature obtained by the physical - mathematical model was 81.85 ℃, and the maximum obtained with the thermal simulation was 79.60 ℃. From the results, it can be concluded that conditions in Bogotá DC are not appropriate to cook with a device of this kind.

  13. Simplified dc to dc converter

    Science.gov (United States)

    Gruber, R. P. (Inventor)

    1984-01-01

    A dc to dc converter which can start with a shorted output and which regulates output voltage and current is described. Voltage controlled switches directed current through the primary of a transformer the secondary of which includes virtual reactance. The switching frequency of the switches is appropriately varied to increase the voltage drop across the virtual reactance in the secondary winding to which there is connected a low impedance load. A starting circuit suitable for voltage switching devices is provided.

  14. Frequency of tuberculous and non-tuberculous mycobacteria in HIV infected patients from Bogota, Colombia

    Directory of Open Access Journals (Sweden)

    León Clara I

    2001-11-01

    Full Text Available Abstract Background The prevalence of infections by Mycobacterium tuberculosis and non-tuberculous Mycobacterium species in the HIV-infected patient population in Colombia was uncertain despite some pilot studies. We determined the frequency of isolation of Mycobacterium tuberculosis and of non-tuberculous Mycobacterium species in diverse body fluids of HIV-infected patients in Bogota, Colombia. Methods Patients who attended the three major HIV/AIDS healthcare centres in Bogota were prospectively studied over a six month period. A total of 286 patients were enrolled, 20% of them were hospitalized at some point during the study. Sixty four percent (64% were classified as stage C, 25% as stage B, and 11% as stage A (CDC staging system, 1993. A total of 1,622 clinical samples (mostly paired samples of blood, sputum, stool, and urine were processed for acid-fast bacilli (AFB stain and culture. Results Overall 43 of 1,622 cultures (2.6% were positive for mycobacteria. Twenty-two sputum samples were positive. Four patients were diagnosed with M. tuberculosis (1.4%. All isolates of M. tuberculosis were sensitive to common anti-tuberculous drugs. M. avium was isolated in thirteen patients (4.5%, but only in three of them the cultures originated from blood. The other isolates were obtained from stool, urine or sputum samples. In three cases, direct AFB smears of blood were positive. Two patients presented simultaneously with M. tuberculosis and M. avium. Conclusions Non-tuberculous Mycobacterium infections are frequent in HIV infected patients in Bogota. The diagnostic sensitivity for infection with tuberculous and non-tuberculous mycobacteria can be increased when diverse body fluids are processed from each patient.

  15. Frequency of tuberculous and non-tuberculous mycobacteria in HIV infected patients from Bogota, Colombia.

    Science.gov (United States)

    Murcia-Aranguren, M I; Gómez-Marin, J E; Alvarado, F S; Bustillo, J G; de Mendivelson, E; Gómez, B; León, C I; Triana, W A; Vargas, E A; Rodríguez, E

    2001-01-01

    The prevalence of infections by Mycobacterium tuberculosis and non-tuberculous Mycobacterium species in the HIV-infected patient population in Colombia was uncertain despite some pilot studies. We determined the frequency of isolation of Mycobacterium tuberculosis and of non-tuberculous Mycobacterium species in diverse body fluids of HIV-infected patients in Bogota, Colombia. Patients who attended the three major HIV/AIDS health care centres in Bogota were prospectively studied over a six month period. A total of 286 patients were enrolled, 20% of them were hospitalized at some point during the study. Sixty four percent (64%) were classified as stage C, 25% as stage B, and 11% as stage A (CDC staging system, 1993). A total of 1,622 clinical samples (mostly paired samples of blood, sputum, stool, and urine) were processed for acid-fast bacilli (AFB) stain and culture. Overall 43 of 1,622 cultures (2.6%) were positive for mycobacteria. Twenty-two sputum samples were positive. Four patients were diagnosed with M. tuberculosis (1.4%). All isolates of M. tuberculosis were sensitive to common anti-tuberculous drugs. M. avium was isolated in thirteen patients (4.5%), but only in three of them the cultures originated from blood. The other isolates were obtained from stool, urine or sputum samples. In three cases, direct AFB smears of blood were positive. Two patients presented simultaneously with M. tuberculosis and M. avium. Non-tuberculous Mycobacterium infections are frequent in HIV infected patients in Bogota. The diagnostic sensitivity for infection with tuberculous and non-tuberculous mycobacteria can be increased when diverse body fluids are processed from each patient.

  16. [Fertility in Bogota, Medellin, Cali, and Barranquilla. National Household Survey: stage 15].

    Science.gov (United States)

    Rico De Alonso, A

    1978-01-01

    This document presents the results of the household survey conducted in 1977 in Bogota, Medellin, Cali, and Barranquilla in Colombia. Main objective of the survey was to gather reliable indicators of fertility rate. The survey included 6084 households and a total of 9561 women aged 15-49. Fertility rate decreased in 3 cities between 1973 and 1977; from 87 to 84/1000 in Bogota, from 77 to 70/1000 in Medellin, from 94 to 90/1000 in Cali, and it increased from 93 to 106/1000 in Barranquilla; consequently family size decreased during the same period. Several reasons can explain this decrease in the fertility rate: 1) a decrease in the percentage of legally or consensually married women, 2) an increase of 0.19 to 1.21 years in the age at marriage, and 3) an increase in the age at first delivery. A direct and inverse correlation was found between the educational level of the mother and parity, and between the marital status of the mother and parity, married women having more children and earlier in life than either unmarried women or women living in consensual unions. In all cities surveyed women holding a job outside of the home had fewer children than housewives, 3.1 versus 3.5 in Bogota, 3.3 versus 4.6 in Medellin, 3.1 versus 3.5 in Cali, and 3.3 versus 3.9 in Barranquilla. It must be remembered that the percentage of women in the labor force has increased from 35%, 31%, 29%, and 29% in 1964, to 38%, 39%, 39%, and 36% in 1977 in the 4 cities considered. Women coming from rural areas and living in the city for less than 1 year have the highest fertility rate, in all age groups. Registration of births is not always accurate; married women tend to register the birth of their children more than unmarried, separated, or widowed mothers. The percentage of births outside the hospital was, in 1977, 15% in Bogota, 13% in Medellin, 22% in Cali, and 26% in Barranquilla. The higher socioeconomic classes tend to go to the hospital for delivery more than the lower classes

  17. PWM DC/DC Converter

    OpenAIRE

    Chen, Juan

    2008-01-01

    This report is the result of a Master Thesis work done at Seaward Electronics Inc. in Beijing, China from June to December in 2007. The main goal for this thesis is to verify and improve the performance of Honey-PWM DC-DC converter, which has been fabricated by a standard 0.6um CMOS processes. The project was started with studying of Buck converter structure. After the understanding of the converter structure, the project goes in to the analyses phase for each sub-cells, including the theory,...

  18. 3D modelling of the Salesian mission Nuestra Señora de la Candelaria cemetery (Río Grande, Tierra del Fuego, Argentina

    Directory of Open Access Journals (Sweden)

    Melisa A. Salerno

    2017-07-01

    Full Text Available The Salesian mission Nuestra Señora de La Candelaria operated between the late 19th and the mid-20th centuries in Río Grande (Tierra del Fuego, Argentina. Its cemetery still holds the remains of indigenous and religious people who lived in the institution, and settlers who lived nearby. For some years, the place has received the attention of a research project interested in discussing the dynamics of colonial relationships in Tierra del Fuego. The cemetery has a long history of changes, and even though it was declared part of the national and provincial heritage, its preservation conditions are relatively poor. In this article we present the work carried out to produce a 3D model of the cemetery, combining information obtained by planialtimetric and photographic survey. The result represents a detailed and photorealistic record of the materiality of the cemetery at present. Therefore, it does not only provide a relevant tool to colaborate in the promotion and protection of the archaeological heritage. It also provides a platform for future 3D modelling of historical images of the cemetery, with different research goals.

  19. What do the dialysis patients of the Nuestra Señora de la Candelaria University Hospital think about the services received? Valuation of the quality perceived

    Directory of Open Access Journals (Sweden)

    Purificación Cerro López

    2008-03-01

    Full Text Available The following work tries to evaluate the satisfaction degree of the dialysis patients regarding the health attention received, and to identify the problems related to the health care services. To achieve this goal a qualitative-quantitative study was designed. The study population were patients who receive renal substitutive treatment in the Nuestra Señora de la Candelaria University Hospital (HUNSC. Quantitative data were collected by using the questionnaire (SERVQHOS to 71% of the total population. Each item was punctuated in a Likert scale according to the degree of satisfaction (from 1 to 5. The SPSS 13.0 statistical program was used for the data analysis. Qualitative data were collected by formulating an open question which was answered on personal diaries written by some of these patients. The average global satisfaction obtained was 4. The professionalism of the sanitary personnel is among the better aspects valued (4.2 and the transport services among the worse valued (2.1. It was not found statistical significant relation between the analyzed variables and the patients satisfaction degree. Regarding the outcomes of the qualitative analysis, it contributes us very useful information to identify susceptible aspects to improve related to the medical and nursing attention, transport services, ward environment and other resources.

  20. Energy assessment of peri-urban horticulture and its uncertainty: Case study for Bogota, Colombia

    Energy Technology Data Exchange (ETDEWEB)

    Bojaca, C.R. [Centro de Investigaciones y Asesorias Agroindustriales, Facultad de Ciencias Naturales, Universidad de Bogota Jorge Tadeo Lozano, P.O. Box: 140196, Chia (Colombia); Schrevens, E. [Department of Biosystems, Faculty of Applied Bioscience Engineering, Katholieke Universiteit Leuven, Geo-Institute, Celestijnenlaan 200 E, 3001 Heverlee (Belgium)

    2010-05-15

    Scarce information is available about the energy use pattern of horticultural commodities in general and more specifically for peri-urban horticulture. Peri-urban horticulture in the outskirts of Bogota is an important source of vegetables for Colombia's capital city. Based on detailed follow-ups and periodic field measurements an output-input energy balance was performed with the main objective to study the energy use efficiency of those systems. An uncertainty analysis on the input factors and on the energy equivalents was then applied. Over a measurement period of 18-month, the energy use for coriander, lettuce, radish and spinach was investigated, respectively 12.1, 18.8, 6.6 and 10.7 GJ ha{sup -1} were consumed in these cropping systems. Negative balances were observed for all species exception made for spinach where an output:input ratio of 1.16 was found. The two-way uncertainty analysis showed the highest uncertainty for N-based fertilization while no significant effect was observed for seeds in direct sowing crops. Sustainability of peri-urban horticulture around Bogota is compromised not only because of the city expansion but also due to its inefficient energy use. Technical improvements are required to ensure the environmental subsistence of this important sector for the metropolitan area of the city. (author)

  1. Incidence of public expenditure on the human development index in Bogota, 1995-2010

    Directory of Open Access Journals (Sweden)

    Mónica Consuelo Rodríguez Torres

    2012-01-01

    Full Text Available This paper seeks to test the hypothesis that social public expenditure per capita invested in Bogota has had a significant influence on the improvement of the city’s human development. For this purpose, the Human Development Index (HDI for the capital between 1995-2010 is estimated, using the new methodology proposed by the UNDP in 2010. Thus, a retrospective estimation of the life expectancy, salaries, and educational achievement rates is carried out, the last as a combination between the average years of education and expected years of instruction. A qualitative analysis is then presented, between the HDI components and the social public expenditure invested through politics, programs, projects carried out in the city, according to the District Development Plan “Bogotá positiva, para vivir mejor (Positive Bogota, to Live Better”. Finally, a quantitative analysis of this relation is made and it is concluded that social public spending per capita is significant to explain the HDI, since there is a long-term and stable relation between the two variables.

  2. Urban air pollution in school-related microenvironments in Bogota, Colombia

    Directory of Open Access Journals (Sweden)

    Juan Felipe Franco

    2012-10-01

    Full Text Available Particle-related pollution (PM10, PM2.5 and soot was measured in both indoor and outdoor microenvironments at four public elementary schools in Bogota, Colombia. Three of these schools were located alongside major urban roads in which different types of public transit systems are used (bus rapid transit system and conventional transit buses. The fourth school was located on a non-congested road (background school. Pollutant levels at schools situated on major-roads were higher than those found at the low-congestion-road school. Outdoor black carbon daily mean concentrations at the schools located near major roads were up to six times higher than those recorded at the background school. Mean particulate matter concentrations at schools near major roads were above international standards, suggesting that school-age children in Bogota are exposed to pollution levels that are considered to be harmful by environmental and public health authorities. Elevated indoor and outdoor pollutant concentrations documented in this study suggested that traffic has a direct impact on air quality regarding the schools’ characterised microenvironments.

  3. Microscopic Study of Skin Diseases in Horses from the Bogota Savanna, Colombia

    Directory of Open Access Journals (Sweden)

    Iovana Castellanos Londoño

    2014-06-01

    Full Text Available Horses hold third place in number of cases of skin disease after cats and dogs; however, there is little information about the demographic aspects of dermatological diseases in this species in Colombia. The purpose of this work was to carry out a preliminary study in order to determine the dermatological diseases that affect horses in the Bogota Savanna, through biopsy, skin scraping and trichogram, in order to approach the diagnosis and thus to establish therapeutic and prophylactic measures that benefit the animal’s health and productivity in commercial farms. Thirty-nine skin biopsies, thirty-nine cutaneous scraping and thirtyseven samples of hairy peel from horses with some kind of skin disease were received, all of which were processed by the Histopathology Laboratory from La Salle University. The inflammatory injuries were sorted taking into account the histological patterns of inflammatory skin disease and tumors, according to the classification by the World Health Organization (WHO. Allergic dermatitis was the most common pathology (46% and neoplasia was observed in 13% of the cases; fungal spores in ectothrix position were found in 10% of the cutaneous scrapes. Mites of the type Psoroptes spp were identified in one of the trichograms. This is the first report of microscopic diagnosis of skin diseases of horses in the country with the goal of contributing with the demographic knowledge of skin diseases in the Bogota Savanna.

  4. Application of FCI at engineering students in Bogota: an interpretation of the answers through a random model of two levels

    CERN Document Server

    Talero, Paco; Barbosa, Luis

    2012-01-01

    We applied the FCI to 646 engineering students from Bogota when they began your first year physics, we found that the relative frequency of the number of correct answers has a random pattern of two levels, also we found that they don't have clear mental models about physical world.

  5. Mediating Pathways in the Socio-Economic Gradient of Child Development: Evidence from Children 6-42 Months in Bogota

    Science.gov (United States)

    Rubio-Codina, Marta; Attanasio, Orazio; Grantham-McGregor, Sally

    2016-01-01

    Research has previously shown a gap of near 0.5 of a standard deviation (SD) in cognition and language development between the top and bottom household wealth quartile in children aged 6-42 months in a large representative sample of low- and middle-income families in Bogota, using the Bayley Scales of Infant and Toddler Development. The gaps in…

  6. Mediating Pathways in the Socio-Economic Gradient of Child Development: Evidence from Children 6-42 Months in Bogota

    Science.gov (United States)

    Rubio-Codina, Marta; Attanasio, Orazio; Grantham-McGregor, Sally

    2016-01-01

    Research has previously shown a gap of near 0.5 of a standard deviation (SD) in cognition and language development between the top and bottom household wealth quartile in children aged 6-42 months in a large representative sample of low- and middle-income families in Bogota, using the Bayley Scales of Infant and Toddler Development. The gaps in…

  7. 77 FR 77035 - U.S. Infrastructure Trade Mission to Colombia and Panama; Bogota, Columbia and Panama City...

    Science.gov (United States)

    2012-12-31

    ... International Trade Administration U.S. Infrastructure Trade Mission to Colombia and Panama; Bogota, Columbia... Register of December 4, 2012 regarding the U.S. Infrastructure Trade Mission to Colombia and Panama May 13.... Commercial Service Colombia, Tel: 57-1-2752519, Email: carlos.suarez@trade.gov ; or Enrique Tellez,...

  8. Isolerad DC/DC-omvandlare

    OpenAIRE

    Andersson, Martin

    2011-01-01

    1 SammanfattningCrossControl är ett företag som bland annat tillverkar integrerade datorlösningar. Datorerna drivs normalt med 18-30 VDC och förbrukar som mest 50W. Datorerna säljs till flertalet olika kunder som monterar dem i allt från skogsmaskiner till tåg. I de olika fordonen varierar spänningen i de befintliga elnäten. Detta skapar behovet av att omvandla spänningen till en nivå som datorerna klarar av. En sådan apparat kallas DC/DC-omvandlare. Spänningsomvandling kan utföras genom linj...

  9. Frecuencia de lesiones en cavidad oral de pacientes con VIH/sida en el Hospital Universitario San Ignacio de Bogota, Colombia

    National Research Council Canada - National Science Library

    Medina Becerra, Nelsy Esther; Betancourt Schanowski, Francisco Alejandro; Patino Azuero, Juan Carlos; Brett Figueroa, Maria Mercedes

    2012-01-01

    Objetivo: determinar la frecuencia de las lesiones orales que se presentaron en los pacientes con VIH/sida que asistieron a la Unidad de Infectologia del Hospital Universitario San Ignacio en Bogota, Colombia...

  10. Adaptable DC offset correction

    Science.gov (United States)

    Golusky, John M. (Inventor); Muldoon, Kelly P. (Inventor)

    2009-01-01

    Methods and systems for adaptable DC offset correction are provided. An exemplary adaptable DC offset correction system evaluates an incoming baseband signal to determine an appropriate DC offset removal scheme; removes a DC offset from the incoming baseband signal based on the appropriate DC offset scheme in response to the evaluated incoming baseband signal; and outputs a reduced DC baseband signal in response to the DC offset removed from the incoming baseband signal.

  11. Triceps and subscapular skinfold thicknesses percentiles and cut-offs for overweight and obesity in a population-based sample of schoolchildren in Bogota, Colombia

    OpenAIRE

    Lopez Cifuentes, Mario Ferney

    2016-01-01

    OBJECTIVES: The aims of this study were to establish a Colombian smoothed centile charts and LMS tables for tríceps, subscapular and sum tríceps+subscapular skinfolds; appropriate cut-offs were selected using receiver operating characteristic analysis based in a populationbased sample of schoolchildren in Bogota, Colombia and to compare them with international studies. METHODS: A total of 9 618 children and adolescents attending public schools in Bogota, Colombia (55.7% girl...

  12. Social responsability of the Bogota companies and their relation to employement and poverty

    Directory of Open Access Journals (Sweden)

    Adriana Patricia López Velázquez

    2006-07-01

    Full Text Available This article shows the main results , conclusions and recommendations from two researches about Entrepreneurial Social Responsibility (RSE, and its relation to poverty and employment in the specific case of Bogotá. These results were obtained from a field work and literature revision about RSE, both nationally and internationally. It is worth noting that most of the Bogota companies do not know or do not have any interest in RSE, for them RSE implies high costs and little economic revenue. Out of the total of companies, only 1,3% have participated in programs to reduce poverly applied by district administration, where the common points of public and private investmetl have been education, nutrition and housing programs. The companies that include RSE programs for their workers consider it positive, because the work environment improved and the employees' productivity increased, which contributed for the welfare of both parties.

  13. Reference Values of Arterial Gases and Electrolytes in Canines from the Bogota Savanna

    Directory of Open Access Journals (Sweden)

    Carlos Andrés Trujillo Jurado

    2014-06-01

    Full Text Available Due to the lack of arterial gas values that meet our environmental conditions and the wide variety of out-of-date data in literature and used in everyday practice, obtained with different heights, breeds and equipment to the ones available in our context, it becomes necessary to generate our own knowledge adjusted to our reality. A random systematic measurement of arterial and venous blood was made on 100 healthy canines in the Bogota Savanna (Chia: 2652 m.a.s.l.; Cajica: 2558 m.a.s.l.; Sopo: 2650 m.a.s.l.; La Calera: 2718 m.a.s.l.; and Bogota: 2630 m.a.s.l.;, using the I-STAT® analyzer with EG7+ cartridge. Reference values were found for gasometry, electrolytes, effective basis and pH. The values were compared between four groups by weight. Descriptive statistics were made for each parameter based on average, standard deviation and standard error, and the trust limits (95% and the intervals with standard deviation (one and two deviations were found. A decrease on PCO2, PO2, SO2, bicarbonate and BE was evident. The pH was found to be slightly increased, similar to the one reported by authors at great heights and different (not statistically confirmed from reports in literature, where height was not a variable. Even so, they are frequently used as reference in the practice of small animals; only PO2 presented statistical differences by groups of weight. As a conclusion, effective regulation of blood pH was evident at 2600 m.a.s.l., with different bicarbonate values, PCO2, PO2, BE, which suggest the need to obtain and use reference values consistent with local conditions.

  14. Personal dosimetry TLD 100 in orthopedic surgeons exposed to ionizing radiation in Bogota - Colombia; Dosimetria personal TLD 110 en medicos ortopedistas expuestos a radiacion ionizante en Bogota - Colombia

    Energy Technology Data Exchange (ETDEWEB)

    Sierra C, B. Y.; Jimenez, Y. [Universidad Nacional de Colombia, Departamento de Fisica, Grupo de Fisica Medica, Carrera 45 No. 26-85, Bogota (Colombia); Plazas, M. C. [Hospital Universitario Fundacion Santa Fe de Bogota, Instituto de Oncologia Carlos Ardila Lulle, Calle 119, No. 7-90, 220246 Bogota (Colombia); Eslava S, J. [Universidad Nacional de Colombia, Instituto de Investigaciones Clinicas, Grupo Equidad en Salud, Carrera 45 No. 26-85, Bogota (Colombia); Groot R, H., E-mail: brigith.sierra@gmail.com [Universidad de los Andes, Laboratorio de Genetica Humana, Carrera 1 No. 18A -12, Bogota (Colombia)

    2014-08-15

    Orthopedic surgeons should be considered as professionals occupationally exposed to ionizing radiation, for using C arc (fluoroscope) an equipment of X type radiation emission, during surgical procedures for imaging generation. Some health institutes, use of C arc under uncontrolled circumstances, such a lack of dosimetry control, incomplete or absence of personnel protective elements and protective measures, which in turn, lead to a high exposition to the personnel. Materials and methods. Study of double match cohort by age and gender, was conducted, in four health institutions of second and third level of attention in Bogota city. Personal dosimetry measurements with TLD-100 dosimetry crystals in both cohorts and environmental dosimetry in each of operation rooms used for orthopedic procedures, were carry out during six months of follow up. Dosimetry crystals were read in a Harshaw 4500 - Bicron equipment, in the Medical Physics Laboratory of National University of Colombia. Results. Dosimetry measurements are compatibles with those of occupationally exposed personnel 3.44 mSv/6 m CI 95% (1.66-3.99), even does not overpass ICRP recommendations, are higher as were expect at the beginning of the study. The median of effective accumulative dose in thorax is 3,4 mSv CI 95% (1,66-3,99), higher in comparison with neck value 2,7 mSv CI 95% (1,73-3,80) and hand dosimetry 1,42 mSv CI 95% (0,96-2,34). Conclusions: Orthopedic surgeons should be considered occupational exposed to ionizing radiation, who has to accomplish to the radiological protection measures, dosimetric follow up and maintenance of the used X ray equipment. It was confirm throughout this study that dosimetry shows higher levels as expected at the beginning of the study, compatible with occupationally exposed personnel. (Author)

  15. "Forback" Dc-To-Dc Converters

    Science.gov (United States)

    Lukemire, Alan T.

    1992-01-01

    Dc-to-dc power-converter circuits called "forback" resemble circuits of standard configurations called "forward", "flyback", and "Cuk". Circuit employs minor modifications to existing topologies, combines advantages, while eliminating disadvantages, of older circuits.

  16. Multiport Resonant DC-DC Converter

    OpenAIRE

    Tran, Yan-Kim; Dujic, Drazen; Barrade, Philippe

    2015-01-01

    his paper presents a multiport galvanically isolated LLC resonant DC-DC converter suitable for DC applications. A three-port structure is analyzed, with full bidirectional power flow capabilities, simple control and behavior similar to that expected from a DC transformer. Each port is equipped with half-bridge modules accompanied with tuned resonant tank, partly realized with elements of a multi- winding high frequency transformer. With some restrictions that are explained in the paper, each ...

  17. VLSI Hybrid DC-DC Regulator

    OpenAIRE

    Cosp Vilella, Jordi; Martínez García, Herminio

    2015-01-01

    Hybrid DC-DC regulators are structures that combine both a linear voltage regulator and a switching DC-DC converter. The main objective of this hybrid topology is to converge, in a single circuit topology, the best of both alternatives: a small voltage output ripple, which is a common characteristic of linear regulator circuits, and good energy efficiency, as in switching alternatives. While the linear regulator fixes the required output voltage to a fixed value with negligible steady-state r...

  18. Local Bifurcations in DC-DC Converters

    OpenAIRE

    2012-01-01

    Three local bifurcations in DC-DC converters are reviewed. They are period-doubling bifurcation, saddle-node bifurcation, and Neimark bifurcation. A general sampled-data model is employed to study the types of loss of stability of the nominal (periodic) solution and their connection with local bifurcations. More accurate prediction of instability and bifurcation than using the averaging approach is obtained. Examples of bifurcations associated with instabilities in DC-DC converters are given.

  19. High-Efficiency dc/dc Converter

    Science.gov (United States)

    Sturman, J.

    1982-01-01

    High-efficiency dc/dc converter has been developed that provides commonly used voltages of plus or minus 12 Volts from an unregulated dc source of from 14 to 40 Volts. Unique features of converter are its high efficiency at low power level and ability to provide output either larger or smaller than input voltage.

  20. Genotyping Klebsiella pneumoniae isolated from hepatic abscesses in three patients from Bogota, Colombia

    Directory of Open Access Journals (Sweden)

    Dora I. Ríos

    2013-01-01

    Full Text Available Pyogenic liver abscess caused by Klebsiella pneumoniae represents an ever increasing entity which has mainly been described as occurring in Asia, even though, on a smaller scale, cases are being more frequently described from the USA and Europe, 13% overall mortality being reached worldwide. Affected patients are severely sick, suffering from fever, sweating, having increased acute phase reactants and risk factors such as Diabetes Mellitus, alcoholism and the inherent characteristics of the bacteria causing the disease. Objective: in this work we used a Multilocus Sequencing Typing (MLST, a nucleotide sequence-based method in order to characterize the genetic relationships among bacterial isolates. Materials and methods: the report is focused on three cases involving patients suffering from pyogenic liver abscess caused by Klebsiella pneumoniae in two hospitals in Bogota, Colombia, where phenotyping and hypermucoviscosity studies were carried out, as well as the genotyping of cultured Klebsiella isolates. Reults: it was found that the isolated microorganism in cases I and II corresponded to the same K. pneumoniae strain, having 100% sequence identity for the 5 genes being studied while the strain in Case III was genotypically different. Conclusion: it is important to carry out multidisciplinary studies allowing all pyogenic liver abscess cases reported in Colombia to be complied to ascertain the frequency of microorganisms causing this pathology in our country, as well as a genotyping study of different K. pneumoniae strains to compare them and confirm clonal and pathogenicity relationships through housekeeping gene analysis.

  1. CMOS Integrated Capacitive DC-DC Converters

    CERN Document Server

    Van Breussegem, Tom

    2013-01-01

    This book provides a detailed analysis of all aspects of capacitive DC-DC converter design: topology selection, control loop design and noise mitigation. Readers will benefit from the authors’ systematic overview that starts from the ground up, in-depth circuit analysis and a thorough review of recently proposed techniques and design methodologies.  Not only design techniques are discussed, but also implementation in CMOS is shown, by pinpointing the technological opportunities of CMOS and demonstrating the implementation based on four state-of-the-art prototypes.  Provides a detailed analysis of all aspects of capacitive DC-DC converter design;  Analyzes the potential of this type of DC-DC converter and introduces a number of techniques to unleash their full potential; Combines system theory with practical implementation techniques; Includes unique analysis of CMOS technology for this application; Provides in-depth analysis of four fabricated prototypes.

  2. DC/DC Converter Stability Testing Study

    Science.gov (United States)

    Wang, Bright L.

    2008-01-01

    This report presents study results on hybrid DC/DC converter stability testing methods. An input impedance measurement method and a gain/phase margin measurement method were evaluated to be effective to determine front-end oscillation and feedback loop oscillation. In particular, certain channel power levels of converter input noises have been found to have high degree correlation with the gain/phase margins. It becomes a potential new method to evaluate stability levels of all type of DC/DC converters by utilizing the spectral analysis on converter input noises.

  3. Propuesta y diseño de un sistema de información turística para centros colombianos: estudio de caso del centro histórico de La Candelaria (Bogotá

    Directory of Open Access Journals (Sweden)

    Miriam Menchero Sánchez

    2015-01-01

    Full Text Available El programa “Red Turística de Pueblos de Patrimonio” cuenta en la actualidadcon más de 14 centros históricos, lo que evidencia el ascenso de los mismos a laoferta turística colombiana. La Candelaria en Bogotá, sin pertenecer a la red,cuenta con más de 65 bienes culturales y muestra un crecimiento continuo en laafluencia de turistas culturales.Sin embargo, su incorporación al turismo no está siendo evaluada, siendonecesario un sistema de recolección de datos que permita una mejor gestióncomo destino turístico. Su aplicación arroja conclusiones extrapolables a lamedición del turismo en otros centros históricos colombianos, ámbito apenasestudiado como evidencia la investigación realizada.

  4. Latin American Clinical Epidemiology Network Series - Paper 5: Years of life lost due to premature death in traffic accidents in Bogota, Colombia.

    Science.gov (United States)

    Quitian-Reyes, Hoover; Gómez-Restrepo, Carlos; Gómez, Maria Juliana; Naranjo, Salome; Heredia, Patricia; Villegas, John

    2017-06-01

    This study aimed to quantify the number of years of life lost in traffic accidents in Bogota, Colombia. The years of life lost were calculated using the 'age-standardized expected years of life lost' method, the table of Japanese adjusted life expectancy and the database of the Institute of Legal Medicine and Forensic Science between September 2012 and August 2013. During a period of 1 year, 430 people died and 10,056.3 years of life were lost in Bogota due to traffic accidents. The mortality burden of traffic accidents in Bogota is high. Further studies are required in order to characterize the accidents and develop effective policy decisions. Copyright © 2016 Elsevier Inc. All rights reserved.

  5. 76 FR 31462 - Airworthiness Directives; The Boeing Company Model DC-10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10...

    Science.gov (United States)

    2011-06-01

    ... Model DC-10-10, DC- 10-10F, DC-10-15, DC-10-30, DC-10-30F (KC-10A and KDC-10), DC-10-40, DC-10-40F... Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue, SE., Washington, DC 20590.... Applicability (c) This AD applies to all The Boeing Company Model DC-10-10, DC-10-10F, DC-10-15,......

  6. DC to DC converters: operation; Hacheurs: fonctionnement

    Energy Technology Data Exchange (ETDEWEB)

    Bernot, F. [Ecole d' Ingenieurs de Tours, 37 (France)

    2002-05-01

    This article deals with pulse width modulation (PWM) and pulse position modulation (PPM) DC to DC converters. A tri-phase PWM converter is made of 6 simple DC/DC converters grouped together into 3 reversible converters of the same type: 1 - single-quadrant voltage lowering converters (hydraulic analogy, study with ideal elements, full scheme with input and output filters); 2 - single-quadrant voltage raising converters (hydraulic analogy, operation); 3 - two quadrants reversible converters (structure construction, quadrants of operation, reversible converter connected to a DC motor); 4 - four-quadrants reversible converters; 5 - other converters structure (current converters and converters with intermediate storage, asymmetrical converters, converters with capacitive storage, insulated converters, resonating converters, status); 6 - conclusion. (J.S.)

  7. Impact of payroll taxes for small shoe manufacturing enterprises profit generation in Bogota city 15th district

    Directory of Open Access Journals (Sweden)

    José Armando Hernández Bernal

    2016-04-01

    Full Text Available In this paper we illustrate the financial difficulties that payroll taxes would impose on small shoe manufacturing enterprises in Bogota City 15th district and how this would impose some restrictions for firms profit generation, when such contributions turns out to be a fixed cost. We present a brief on the legal framework as well as an econometric exercise that shows the relations between labor costs and profit generation for the footwear industry in the 15th urban district of Bogotá city.

  8. Description of a new soft scale insect of the genus Pulvinaria Targioni Tozzetti (Hemiptera, Coccoidea, Coccidae) from Bogota, Colombia.

    Science.gov (United States)

    Tanaka, Hirotaka; Kondo, Takumasa

    2015-01-01

    A new soft scale (Hemiptera: Coccoidea: Coccidae) species, Pulvinariacaballeroramosae Tanaka & Kondo, sp. n., is described from specimens collected on twigs of Ficussoatensis Dugand (Moraceae) in Bogota, Colombia. The new species resembles Pulvinariadrymiswinteri Kondo & Gullan, described from Chile on Drimyswinteri J.R. Forst. & G. Forst. (Winteraceae), but differs in the distribution of preopercular pores on the dorsum, the presence of dorsal tubular ducts, dorsal microducts, and reticulation on the anal plates; and in its feeding habits, i.e., Pulvinariacaballeroramosae feeds on the twigs whereas Pulvinariadrymiswinteri feeds on the leaves of its host. A key to the Colombian species of Pulvinaria Targioni Tozzetti is provided.

  9. Mutual Information in the Air Quality Monitoring Network of Bogota - Colombia

    Science.gov (United States)

    Guerrero, O. J.; Jimenez-Pizarro, R.

    2012-12-01

    Large urban areas in the developing world are characterized by high population density and a great variety of activities responsible for emission of trace gases and particulate matter to the atmosphere. In general, these pollutants are unevenly distributed over cities according to the location of sources, meteorological variability and geographical features. Urban air quality monitoring networks are primarily designed to protect public health. The meteorological and air quality information gathered by monitoring networks can also be used to understand pollutant sources, sinks, and dispersion processes and to assess the spatial coverage of the network itself. Several statistical and numerical simulation methods allow for the identification of the domain that influences observations at each of the stations, i.e, the zone and respective population truly covered by the measurements. We focused on Bogota, Colombia, a dense city of approximately 9.6 million inhabitants in its metropolitan area. We analyzed the measurements obtained by the Bogotá Air Quality Monitoring Network (RMCAB) between the years 1997 and 2010 for TSP, PM10, CO, NOx and O3. RMCAB is composed of 16 stations, 13 of which are fixed and measure both atmospheric pollutants and meteorological variables. The method applied consisted of a statistical approach based on the mutual information that each station shares with its complement, i.e. the set formed by the other stations of the network. In order to improve our understanding and interpretation of the results, virtual data created for selected receptors along a simple modeled Gaussian plume spreading throughout Bogotá was analyzed. In this Gaussian model, we accounted for the prevailing weather conditions of this city and for different emission features under which the pollutants are emitted. The spatial location of the monitoring stations and emission sources, and the quality of the measurements are relevant factors when assessing the mutual

  10. A resonant dc-dc power converter assembly

    DEFF Research Database (Denmark)

    2015-01-01

    The present invention relates to a resonant DC-DC power converter assembly comprising a first resonant DC-DC power converter and a second resonant DC-DC power converter having identical circuit topologies. A first inductor of the first resonant DC-DC power converter and a second inductor...... of the second resonant DC-DC power converter are configured for magnetically coupling the first and second resonant DC-DC power converters to each other to forcing substantially 180 degrees phase shift, or forcing substantially 0 degree phase shift, between corresponding resonant voltage waveforms of the first...... and second resonant DC-DC power converters. The first and second inductors are corresponding components of the first and second resonant DC-DC power converters....

  11. Charge pump DC-DC converter comprising solid state batteries

    NARCIS (Netherlands)

    Reefman, D.; Roozeboom, F.; Notten, P.H.L.; Klootwijk, J.H.

    2013-01-01

    An electronic device is provided which comprises a DC-DC converter. The DC-DC converter comprises at least one solid-state rechargeable battery (B1, B2) for storing energy for the DC-DC conversion and an output capacitor (C2).

  12. DC source assemblies

    Science.gov (United States)

    Campbell, Jeremy B; Newson, Steve

    2013-02-26

    Embodiments of DC source assemblies of power inverter systems of the type suitable for deployment in a vehicle having an electrically grounded chassis are provided. An embodiment of a DC source assembly comprises a housing, a DC source disposed within the housing, a first terminal, and a second terminal. The DC source also comprises a first capacitor having a first electrode electrically coupled to the housing, and a second electrode electrically coupled to the first terminal. The DC source assembly further comprises a second capacitor having a first electrode electrically coupled to the housing, and a second electrode electrically coupled to the second terminal.

  13. Radiation effects on DC-DC Converters

    Science.gov (United States)

    Zhang, Dexin; Attia, John O.; Kankam, Mark D. (Technical Monitor)

    2000-01-01

    DC-DC switching converters are circuits that can be used to convert a DC voltage of one value to another by switching action. They are increasing being used in space systems. Most of the popular DC-DC switching converters utilize power MOSFETs. However power MOSFETs, when subjected to radiation, are susceptible to degradation of device characteristics or catastrophic failure. This work focuses on the effects of total ionizing dose on converter performance. Four fundamental switching converters (buck converter, buck-boost converter, cuk converter, and flyback converter) were built using Harris IRF250 power MOSFETs. These converters were designed for converting an input of 60 volts to an output of about 12 volts with a switching frequency of 100 kHz. The four converters were irradiated with a Co-60 gamma source at dose rate of 217 rad/min. The performances of the four converters were examined during the exposure to the radiation. The experimental results show that the output voltage of the converters increases as total dose increases. However, the increases of the output voltage were different for the four different converters, with the buck converter and cuk converter the highest and the flyback converter the lowest. We observed significant increases in output voltage for cuk converter at a total dose of 24 krad (si).

  14. 75 FR 61989 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-8-31, DC-8-32, DC-8-33, DC-8-41...

    Science.gov (United States)

    2010-10-07

    ... Corporation Model DC- 8-31, DC-8-32, DC-8-33, DC-8-41, DC-8-42, and DC-8-43 Airplanes; Model DC-8-50 Series Airplanes; Model DC-8F-54 and DC-8F-55 Airplanes; Model DC-8-60 Series Airplanes; Model DC-8-60F Series Airplanes; Model DC-8- 70 Series Airplanes; and Model DC-8-70F Series Airplanes AGENCY:......

  15. 75 FR 36298 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-8-31, DC-8-32, DC-8-33, DC-8-41...

    Science.gov (United States)

    2010-06-25

    ... Corporation Model DC- 8-31, DC-8-32, DC-8-33, DC-8-41, DC-8-42, and DC-8-43 Airplanes; Model DC-8-50 Series Airplanes; Model DC-8F-54 and DC-8F-55 Airplanes; Model DC-8-60 Series Airplanes; Model DC-8-61 Series Airplanes; Model DC-8-70 Series Airplanes; and Model DC-8-70F Series Airplanes AGENCY:......

  16. A DC Transformer Project

    Data.gov (United States)

    National Aeronautics and Space Administration — During the period of this project three different possible DC transformer concepts were proposed, theoretically modeled, and then experimentally tested with the...

  17. Radiation Effects on DC-DC Converters

    Science.gov (United States)

    Zhang, De-Xin; AbdulMazid, M. D.; Attia, John O.; Kankam, Mark D. (Technical Monitor)

    2001-01-01

    In this work, several DC-DC converters were designed and built. The converters are Buck Buck-Boost, Cuk, Flyback, and full-bridge zero-voltage switched. The total ionizing dose radiation and single event effects on the converters were investigated. The experimental results for the TID effects tests show that the voltages of the Buck Buck-Boost, Cuk, and Flyback converters increase as total dose increased when using power MOSFET IRF250 as a switching transistor. The change in output voltage with total dose is highest for the Buck converter and the lowest for Flyback converter. The trend of increase in output voltages with total dose in the present work agrees with those of the literature. The trends of the experimental results also agree with those obtained from PSPICE simulation. For the full-bridge zero-voltage switch converter, it was observed that the dc-dc converter with IRF250 power MOSFET did not show a significant change of output voltage with total dose. In addition, for the dc-dc converter with FSF254R4 radiation-hardened power MOSFET, the output voltage did not change significantly with total dose. The experimental results were confirmed by PSPICE simulation that showed that FB-ZVS converter with IRF250 power MOSFET's was not affected with the increase in total ionizing dose. Single Event Effects (SEE) radiation tests were performed on FB-ZVS converters. It was observed that the FB-ZVS converter with the IRF250 power MOSFET, when the device was irradiated with Krypton ion with ion-energy of 150 MeV and LET of 41.3 MeV-square cm/mg, the output voltage increased with the increase in fluence. However, for Krypton with ion-energy of 600 MeV and LET of 33.65 MeV-square cm/mg, and two out of four transistors of the converter were permanently damaged. The dc-dc converter with FSF254R4 radiation hardened power MOSFET's did not show significant change at the output voltage with fluence while being irradiated by Krypton with ion energy of 1.20 GeV and LET of 25

  18. L-Moments Regional Frequency Analysis Methodology Application in maximum rainfall values over the Bogota River's basin

    Science.gov (United States)

    Romero, Claudia; Mesa, Duvan

    2015-04-01

    L-Moments Regional Frequency Analysis Methodology Application in maximum rainfall values over the Bogota River's basin 1°Claudia Patricia Romero Hernández; 2°Duvan Javier Mesa Fernández Universidad Santo Tomas; Colombia The application area of this methodology is the Bogota River's basin, which is located in Cundinamarca; a Colombian department with a total surface area of 589.143 hectares. This basin includes 19 sub-basins, and it is the most densely urbanized of the country. Including its metropolitan area, this region boasts a population of 9.000.000 inhabitants; which composes approximately 23% of Colombia's population and possesses around 19% of the country's industries. This basin has shown a notorious increase of complicated floods frequency in the last few years due to climatic variations. These climatic periods correspond to a weather pattern called Niña Phenomenon (2010-2011), which affected 57.000 citizens in this department and 4,900 people directly in Bogota city, with an estimated economic damage of 277'121,052 USD. The Regional Frequency Analysis methodology is a statistics procedure that consists in adding information from multiple samples in a single large sample, assuming previously that all of these come from the same probability model, except for a difference between them due to a scale factor. These samples are defined by a "regionalization" procedure known as the "Avenue Index" or "Flood Index". This procedure groups several kinds of information that comes from a common probability model, such as temperature, rainfall, and water flow. This model must be similar for all of the weather stations located in a homogeneous region. Maps for each of 4 return periods (5, 10, 50 and 100 years) were developed based on 120 weather stations located on this basin. The information used in this process comes from median monthly rainfall data, based on historical series between 30 and 40 years average. An increase in the annual median rainfall was

  19. Description of a new soft scale insect of the genus Pulvinaria Targioni Tozzetti (Hemiptera, Coccoidea, Coccidae from Bogota, Colombia

    Directory of Open Access Journals (Sweden)

    Hirotaka Tanaka

    2015-03-01

    Full Text Available A new soft scale (Hemiptera: Coccoidea: Coccidae species, Pulvinaria caballeroramosae Tanaka & Kondo, sp. n., is described from specimens collected on twigs of Ficus soatensis Dugand (Moraceae in Bogota, Colombia. The new species resembles P. drymiswinteri Kondo & Gullan, described from Chile on Drimys winteri J.R. Forst. & G. Forst. (Winteraceae, but differs in the distribution of preopercular pores on the dorsum, the presence of dorsal tubular ducts, dorsal microducts, and reticulation on the anal plates; and in its feeding habits, i.e., P. caballeroramosae feeds on the twigs whereas P. drymiswinteri feeds on the leaves of its host. A key to the Colombian species of Pulvinaria Targioni Tozzetti is provided.

  20. SEMBRANDO EN LOS PANTANOS: DESCRIPCION BREVE DE LOS SISTEMAS INTENSIVOS PARA LA PRODUCCION AGRICOLA EN EL ÁREA MAYA, Y LA CUENCA MEDIA DEL Río CANDELARIA, CAMPECHE, MEXICO

    Directory of Open Access Journals (Sweden)

    ULISES CHÁVEZ JIMÉNEZ

    2012-01-01

    Full Text Available El estudio del polen antiguo es una herramienta fundamental para entender cómo ha evolucionado el ambiente; y cómo el ser humano, inmerso en esta naturaleza tan dinámica, contribuye como agente activo en la transformación de su entorno físico, y en la configuración del paisaje. En 2010 se tomaron muestras de sedimentos de los humedales en la cuenca media del río Candelaria, en el área de humedales frente al sitio arqueológico de El TIgre. Su análisis y estudio permitirá indagar los cambios en la cubierta vegetal que se supone, sucedieron en la región durante época prehispénica, producto de la actividad humana en el área. En este artículo se presenta una breve revisión bibliográfica, así como una descripción en tomo a los sistemas intensivos para la producción agrícola en el área maya, y algunos preliminares polinicos de la región pantanosa en El Tigre. Se espera sea esta la introducción para un estudio polínico mucho más detallado en el futuro mediato.

  1. 75 FR 38943 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-10-10, DC-10-10F, DC-10-30, DC...

    Science.gov (United States)

    2010-07-07

    ... Corporation Model DC- 10-10, DC-10-10F, DC-10-30, DC-10-30F (KDC-10), DC-10-40, and DC-10-40F Airplanes AGENCY... propose to adopt a new airworthiness directive (AD) for certain Model DC-10-10, DC-10-10F, DC-10-30, DC-10-30F (KDC-10), DC-10- 40, and DC-10-40F airplanes. This proposed AD would require......

  2. Identifying explanatory variables of structural state for optimum asset management of urban drainage networks: a pilot study for the city of Bogota

    Directory of Open Access Journals (Sweden)

    H Angarita

    2017-05-01

    Full Text Available The aim of this work is to identify and quantify physical and environmental explanatory variables for the structural state of urban drainage networks in a pilot study located in Bogota, Colombia. The analysis used information from 2291 CCTV inspections collected by the Water and Sewerage Company of Bogota (EAAB, from its Spanish initials using tele-operated equipment during 2008-2010. Linear regression models were established to identify the environmental and physical characteristics of the pipes that are significantly associated with the occurrence, magnitude and type of the failures commonly found. Despite the fact that the correlation levels show that the developed model has a very low predictive capacity, it was found that the process of selecting assets for CCTV inspection can be optimized, increasing the success rate in failure detection.

  3. Radiation-Tolerant DC-DC Converters

    Science.gov (United States)

    Skutt, Glenn; Sable, Dan; Leslie, Leonard; Graham, Shawn

    2012-01-01

    A document discusses power converters suitable for space use that meet the DSCC MIL-PRF-38534 Appendix G radiation hardness level P classification. A method for qualifying commercially produced electronic parts for DC-DC converters per the Defense Supply Center Columbus (DSCC) radiation hardened assurance requirements was developed. Development and compliance testing of standard hybrid converters suitable for space use were completed for missions with total dose radiation requirements of up to 30 kRad. This innovation provides the same overall performance as standard hybrid converters, but includes assurance of radiation- tolerant design through components and design compliance testing. This availability of design-certified radiation-tolerant converters can significantly reduce total cost and delivery time for power converters for space applications that fit the appropriate DSCC classification (30 kRad).

  4. Bidirectional dc-to-dc Power Converter

    Science.gov (United States)

    Griesbach, C. R.

    1986-01-01

    Solid-state, series-resonant converter uses high-voltage thyristors. Converter used either to convert high-voltage, low-current dc power to lowvoltage, high current power or reverse. Taking advantage of newly-available high-voltage thyristors to provide better reliability and efficiency than traditional converters that use vacuum tubes as power switches. New converter essentially maintenance free and provides greatly increased mean time between failures. Attractive in industrial applications whether or not bidirectional capability is required.

  5. Forback DC-to-DC converter

    Science.gov (United States)

    Lukemire, Alan T.

    1995-05-01

    A pulse-width modulated DC-to-DC power converter including a first inductor, i.e. a transformer or an equivalent fixed inductor equal to the inductance of the secondary winding of the transformer, coupled across a source of DC input voltage via a transistor switch which is rendered alternately conductive (ON) and nonconductive (OFF) in accordance with a signal from a feedback control circuit is described. A first capacitor capacitively couples one side of the first inductor to a second inductor which is connected to a second capacitor which is coupled to the other side of the first inductor. A circuit load shunts the second capacitor. A semiconductor diode is additionally coupled from a common circuit connection between the first capacitor and the second inductor to the other side of the first inductor. A current sense transformer generating a current feedback signal for the switch control circuit is directly coupled in series with the other side of the first inductor so that the first capacitor, the second inductor and the current sense transformer are connected in series through the first inductor. The inductance values of the first and second inductors, moreover, are made identical. Such a converter topology results in a simultaneous voltsecond balance in the first inductance and ampere-second balance in the current sense transformer.

  6. Forback DC-to-DC converter

    Science.gov (United States)

    Lukemire, Alan T. (Inventor)

    1993-01-01

    A pulse-width modulated DC-to-DC power converter including a first inductor, i.e. a transformer or an equivalent fixed inductor equal to the inductance of the secondary winding of the transformer, coupled across a source of DC input voltage via a transistor switch which is rendered alternately conductive (ON) and nonconductive (OFF) in accordance with a signal from a feedback control circuit is described. A first capacitor capacitively couples one side of the first inductor to a second inductor which is connected to a second capacitor which is coupled to the other side of the first inductor. A circuit load shunts the second capacitor. A semiconductor diode is additionally coupled from a common circuit connection between the first capacitor and the second inductor to the other side of the first inductor. A current sense transformer generating a current feedback signal for the switch control circuit is directly coupled in series with the other side of the first inductor so that the first capacitor, the second inductor and the current sense transformer are connected in series through the first inductor. The inductance values of the first and second inductors, moreover, are made identical. Such a converter topology results in a simultaneous voltsecond balance in the first inductance and ampere-second balance in the current sense transformer.

  7. Intelligent dc-dc Converter Technology Developed and Tested

    Science.gov (United States)

    Button, Robert M.

    2001-01-01

    The NASA Glenn Research Center and the Cleveland State University have developed a digitally controlled dc-dc converter to research the benefits of flexible, digital control on power electronics and systems. Initial research and testing has shown that conventional dc-dc converters can benefit from improved performance by using digital-signal processors and nonlinear control algorithms.

  8. Identificación y evaluación de pérdidas en cosecha mecanizada en el cultivo del sorgo Sorehum bicolor (L. Moench en los municipios de Palmira y Candelaria

    Directory of Open Access Journals (Sweden)

    Herrera Gutiérrez Oscar Alonso

    1995-12-01

    Full Text Available

    A trial on tour farms, located in the municipalities of Palmira and Candelaria, from february to July in 1993 was carried out in order to: Identify machinery systems which cause the most losses; and - evaluate the causes and quantify the losses given rise to by the use of machinery in the mechanized harvest of four sorghum cultivars. Using the methology proposed by CHAPARRO (1986, which was partially modified, it was achieved detection of losses in cutting systems, in the threshing, parting and cleaning, in addition to grain lost in other parts. The threshing system was seen to produce the greatest losses due to the excessive wearing of parts in this system, also as a result of poor calibration in a technical sense. The total losses calculated show values of up to 215 kg/ha and more than 10% of the total harvest. Given the representative nature of these farms, considered typical for the Cauca Valley, due to their size and their level of mechanization and technology, it can be inferred that similar high losses are being produced across the board, in this area.

    En el período comprendido entre febrero y julio de 1993, se realizó un ensayo en cuatro fincas localizadas en los Municipios de Palmira y Candelaria, Departamento del Valle del Cauca, con el fin de identificar las pérdidas y los sistemas de las máquinas que presentan los valores más elevados, evaluar sus causas y cuantificar las pérdidas totales debidas a las máquinas, en la cosecha mecanizada de cuatro cultivares de sorgo. Utilizando la metodología propuesta, por CHAPARRO (1986, parcialmente modificada en este estudio, se lograron detectar pérdidas en los sistemas de corte, trilla, separación y limpieza, además de fugas de grano en otros componentes, siendo el sistema de trilla el que presentó las mayores pérdidas debido al desgaste excesivo de las piezas de este sistema o a una calibración poco técnica del mismo; las pérdidas totales debidas a m

  9. 75 FR 20790 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-10-10, DC-10-10F, DC-10-15, DC...

    Science.gov (United States)

    2010-04-21

    ... Corporation Model DC- 10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F (KC-10A and KDC-10), DC-10-40, DC-10-40F... (AD) for certain Model DC-10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F (KC- 10A and KDC-10), DC-10-40, DC-10-40F, MD-10-10F, MD-10-30F, MD-11, and MD-11F airplanes. This proposed......

  10. 75 FR 68246 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-10-10, DC-10-10F, DC-10-15, DC...

    Science.gov (United States)

    2010-11-05

    ... Corporation Model DC- 10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F (KC-10A and KDC-10), DC-10-40, DC-10-40F... to supersede an existing airworthiness directive (AD) that applies to all Model DC-10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F (KC-10A and KDC-10), DC-10-40, DC-10-40F, MD-10-......

  11. Non - Vegetated Standard Bioretention Structure Hydrodynamic Soil Characterization For Ponding - Layer Optimum Thickness Determination With A Distinctive Urban - Region Rainfall Event In Bogota

    Science.gov (United States)

    Velasco Ávila, Frank; Acero Rivero, Germán Eduardo; Angulo Jaramillo, Rafael

    2017-04-01

    Aiming to propose a system, in accordance with Best Management Practices (BMP) kind of structures, specifically a standard bioretention system in Bogota city, and in order to apply the inverse solution methodology on Hydrus - 1D, it is mandatory to determine each θ_s; θ_r; α;n and ks parameters in van Genuchten - Mualem function, without considering the hysteresis phenomenon, for a standard bioretention system composing soils, as well as required components and dimensions to implement the bioretention structure in Bogota. First, a bioretention structure general dimensioning was carried out based on current urban landscaping regulations and recommendations given by the sewage - system service provider in Bogota city. Soil composing and design were performed after information gathering and previous investigation on bioretention systems dimensioning from different sources such as manuals. To give an adequate interpretation of the vadose zone, a soil column experimental prototype was built to be able to control and measure the intervening parameters in the subsoil unidimensional flow description, such as capillary pressure, soil water saturation, inflow and outflow. Thirteen sensor - based devices were built to measure the inverse model required parameters. It is important to underline that all the designed instrumentation was based on low cost electronic development. In addition, the whole instrumentation system is controlled by an Arduino Mega PLC and was designed and built as a personal initiative by the author of this work. For signal processing and data capturing, a commercial Lab View version intuitive program was designed, to be able to create a user-friendly interface to make real-time sensor visualisation and control. Finally, all the hydrodynamic characterisation for the studied soils was made through a Hydrus-1D inverse model and laboratory experimenting and obtained results. In addition, several direct models were run in order to determinate both

  12. Three-port DC-DC converter with new integrated transformer for DC Distribution Systems

    DEFF Research Database (Denmark)

    Ouyang, Ziwei; Andersen, Michael A. E.

    2014-01-01

    A new integrated transformer for three-port dc-dc converter is proposed to overcome the power coupling effect existed in some known multiple inputs dc-dc converters. Orthogonal primary windings arrangement and in series connection of diagonal secondary Windings enables a fully power decoupling...

  13. Overview of Multi-DC-Bus Solutions for DC Microgrids

    DEFF Research Database (Denmark)

    Ricchiuto, D.; Mastromauro, R.A.; Liserre, Marco;

    2013-01-01

    DC Microgrids have recently received a lot of attention in the last years due to high penetration of renewable energy sources as well as distributed energy storage systems. In the future DC microgrids could be preferable respect to AC microgrids in terms of redundancy since multi-DC-Bus solutions...... could provide a continuative power supply to the loads. An overview of Multi-DC-Bus solutions is presented in this paper. The performances are compared on the basis of possible DC microgrid configurations, redundancy, different DC voltage levels....

  14. 75 FR 60602 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-10-10, DC-10-10F, DC-10-15, DC...

    Science.gov (United States)

    2010-10-01

    ... Corporation Model DC- 10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F (KC-10A and KDC-10), DC-10-40, DC-10-40F.... ACTION: Final rule. SUMMARY: We are adopting a new airworthiness directive (AD) for certain Model DC-10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F (KC-10A and KDC-10), DC-10-40,......

  15. 75 FR 23571 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-10-10, DC-10-10F, DC-10-15, DC...

    Science.gov (United States)

    2010-05-04

    ... Corporation Model DC- 10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F (KC-10A and KDC-10), DC-10-40, DC-10-40F.... ACTION: Final rule. SUMMARY: We are adopting a new airworthiness directive (AD) for certain Model DC-10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F (KC-10A and KDC-10), DC-10-40,......

  16. Drugs of abuse consumption in health professionals (physicians and nurses from two outpatient services of first level attention in Bogota

    Directory of Open Access Journals (Sweden)

    Lara-Hidalgo Catalina

    2012-03-01

    Full Text Available We conducted a study to establish the prevalence of drugs of abuse consumption in physiciansand nurses in two health institutions in Bogota outpatient identify the frequency of consumption,to establish the prevalence of alcoholism using the CAGE questionnaire and explore the interestparticipate in prevention or reduction of consumption in the workplace. Materials and methods: Across-sectional study by applying an anonymous survey. Results: There were 58 questionnaires (38in physicians and 20 nurses. The substances most consumed in both groups were alcohol, cigarettesand energy drinks, followed on medical by marijuana in nursing followed by barbiturates, antidepressants,amphetamines and opiates. The prevalence of alcoholism was greater than 8% in bothgroups. 58% of physicians and 70% of nurses would participate in the design of occupational healthprograms to reduce the consumption of psychoactive substances. Conclusions: The use of drugs ofabuse is higher that found in the literature for most of the substances in the general population andis similar to the revised health personnel. It recommends the formulation and implementation ofcorporate policy within the framework of occupational health work of these institutions, aimed atreducing and preventing the consumption of psychoactive substances.

  17. AISLAMIENTO Y CARACTERIZACIÓN DE CEPAS DE Staphylococcus ENTEROTOXIGÉNICOS AISLADOS DE QUESOS EN BOGOTA

    Directory of Open Access Journals (Sweden)

    María Vanegas L

    2008-08-01

    Full Text Available Objetivo. Caracterizar cepas de Staphylococcus aureus enterotoxigénicos provenientes de quesos distribuidos en supermercados, tiendas y en ventas callejeras en la ciudad de Bogota, Colombia. Materiales y métodos. Se recolectaron muestras de quesos provenientes de tiendas, supermercados y ventas callejeras. Se detectó la presencia del gen para enterotoxina A usando un set de primers reportado en estudios previos. Un total de 50 quesos fueron analizados, 13 comercializados en tiendas y en ventas callejeras y 37 en supermercados. Resultados. De las trece muestras de quesos de tiendas y ventas callejeras se aisló Staphylococcus aureus. No hubo presencia de Staphylococcus spp en muestras de quesos de supermercados (n=37. Todos los aislamientos amplificaron para toxina A. Conclusión. Existen diferencias en la calidad de los quesos según sean distribuidos en tiendas de mercado, plazas, ventas callejeras o distribuidos por supermercados, con una alta frecuencia de Staphylococcus aureus coagulasa positivo y productor de toxina A en quesos distribuidos en tiendas y en ventas callejeras.

  18. DC-DC powering for the CMS pixel upgrade

    Science.gov (United States)

    Feld, Lutz; Fleck, Martin; Friedrichs, Marcel; Hensch, Richard; Karpinski, Waclaw; Klein, Katja; Rittich, David; Sammet, Jan; Wlochal, Michael

    2013-12-01

    The CMS experiment plans to replace its silicon pixel detector with a new one with improved rate capability and an additional detection layer at the end of 2016. In order to cope with the increased number of detector modules the new pixel detector will be powered via DC-DC converters close to the sensitive detector volume. This paper reviews the DC-DC powering scheme and reports on the ongoing R&D program to develop converters for the pixel upgrade. Design choices are discussed and results from the electrical and thermal characterisation of converter prototypes are shown. An emphasis is put on system tests with up to 24 converters. The performance of pixel modules powered by DC-DC converters is compared to conventional powering. The integration of the DC-DC powering scheme into the pixel detector is described and system design issues are reviewed.

  19. DC-DC Powering for the CMS Pixel Upgrade

    CERN Document Server

    Feld, Lutz Werner; Marcel Friedrichs; Richard Hensch; Karpinski, Waclaw; Klein, Katja; Rittich, David Michael; Sammet, Jan Domenik; Wlochal, Michael

    2013-01-01

    The CMS experiment plans to replace its silicon pixel detector with a new one with improved rate capability and an additional detection layer at the end of 2016. In order to cope with the increased number of detector modules the new pixel detector will be powered via DC-DC converters close to the sensitive detector volume. This paper reviews the DC-DC powering scheme and reports on the ongoing R and D program to develop converters for the pixel upgrade. Design choices are discussed and results from the electrical and thermal characterisation of converter prototypes are shown. An emphasis is put on system tests with up to24 converters. The performance of pixel modules powered by DC-DC converters is compared to conventional powering. The integration of the DC-DC powering scheme into the pixel detector is described and system design issues are reviewed.

  20. Early Oscillation Detection for DC/DC Converter Fault Diagnosis

    Science.gov (United States)

    Wang, Bright L.

    2011-01-01

    The electrical power system of a spacecraft plays a very critical role for space mission success. Such a modern power system may contain numerous hybrid DC/DC converters both inside the power system electronics (PSE) units and onboard most of the flight electronics modules. One of the faulty conditions for DC/DC converter that poses serious threats to mission safety is the random occurrence of oscillation related to inherent instability characteristics of the DC/DC converters and design deficiency of the power systems. To ensure the highest reliability of the power system, oscillations in any form shall be promptly detected during part level testing, system integration tests, flight health monitoring, and on-board fault diagnosis. The popular gain/phase margin analysis method is capable of predicting stability levels of DC/DC converters, but it is limited only to verification of designs and to part-level testing on some of the models. This method has to inject noise signals into the control loop circuitry as required, thus, interrupts the DC/DC converter's normal operation and increases risks of degrading and damaging the flight unit. A novel technique to detect oscillations at early stage for flight hybrid DC/DC converters was developed.

  1. 75 FR 6160 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-10-10, DC-10-10F, DC-10-15, DC...

    Science.gov (United States)

    2010-02-08

    ... Douglas Corporation Model DC- 10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F (KC-10A and KDC-10), DC-10-40, DC-10-40F, MD-10-10F, MD-10-30F, MD-11, and MD-11F Airplanes AGENCY: Federal Aviation... airworthiness directive (AD) for certain Model DC-10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F (KC- 10A...

  2. Control of improved full-bridge three-level DC/DC converter for wind turbines in a DC grid

    DEFF Research Database (Denmark)

    Deng, Fujin; Chen, Zhe

    2013-01-01

    transformer in the IFBTL dc/dc converter. A modulation strategy, including two operation modes, is proposed for the IFBTL dc/dc converter. Then, a voltage balancing control strategy is proposed for the IFBTL dc/dc converter. Furthermore, the control of the wind turbine based on the IFBTL dc/dc converter......This paper presents an improved full-bridge three-level (IFBTL) dc/dc converter for a wind turbine in a dc grid by inserting a passive filter into the dc/dc converter to improve the performance of the converter. The passive filter can effectively reduce the voltage stress of the medium frequency...... in a dc-grid system is presented. Finally, a small-scale IFBTL dc/dc converter prototype was built and tested in the laboratory, and the results verify the theoretical analysis....

  3. Study of Avian Tuberculosis in a Zoo at the Bogota savannah through Tuberculin Testing and Active Epidemiologic Surveillance

    Directory of Open Access Journals (Sweden)

    Germán Rodríguez Martínez

    2011-06-01

    Full Text Available The flow of wild birds is a weakness in epidemiologic surveillance because of its unknown potential as a source of disease dissemination. The investigation focused on an epidemiological tracking of the mixed wild bird population in a zoo in the Bogota Savannah, where three birds died with a presumptive diagnosis of tuberculosis. In order to verify the presence of Mycobacterium avium and to plan the required measures to avoid risk factors, a control group of five poultry birds of the Hy Line Brown variety that had already been exposed was used, as well as a sentinel group of the poultry birds from the same batch as the control group, and an external control group of 102 birds from cages near the area of the problem. Retrospective and prospective studies were carried out through histopathological, microbiological, epidemiological and molecular analysis. One hundred percent (100% of the birds from the original cages that died were genotypically diagnosed with tuberculosis caused by Mycobacterium avium. Thirty-five percent (35.5% of the sentinel group was affected by Mycobacterium avium, 28.6% by Mycobacterium gordonae, 14.3% by Mycobacterium chelonae and 21.4% by a mycobacterium that is very difficult to classify. The other animals outside the cage showed no evidence of infection. It is concluded that the problematic enclosure is affected by avian tuberculosis, which is of high risk both for birds and for humans. The poultry used as sentinels are excellent infective agent detectors, particularly of mycobacteria present in the environment, and the tuberculin test is a good indicator of infection with this type of microorganisms in poultry.

  4. 75 FR 47242 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-9-14, DC-9-15, and DC-9-15F...

    Science.gov (United States)

    2010-08-05

    ... Corporation Model DC- 9-14, DC-9-15, and DC-9-15F Airplanes; and Model DC-9-20, DC-9-30, DC- 9-40, and DC-9-50... airworthiness directive (AD) that applies to certain Model DC-9-14 and DC-9-15 airplanes; and Model DC-9-20, DC-9-30, DC-9-40, and DC-9-50 series airplanes. The existing AD currently......

  5. Isolated Bidirectional DC-DC Converter for Hybrid Electric Vehicle Application

    Science.gov (United States)

    2006-06-13

    34Approved for public release: distribution is unlimited" Isolated Bidirectional DC-DC Converter for Hybrid Electric Vehicle Applications Sonya...requirements for DC-DC converters for electric and hybrid vehicles . This paper introduces a bidirectional, isolated DC-DC converter for medium power...the design and build of a medium power DC-DC converter . Key words: Power Converter , DC-DC, Hybrid Electric Vehicle , Battery, Galvanically Isolation

  6. 75 FR 63040 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-10-10, DC-10-10F, DC-10-30, DC...

    Science.gov (United States)

    2010-10-14

    ... Corporation Model DC- 10-10, DC-10-10F, DC-10-30, DC-10-30F (KDC-10), DC-10-40, and DC-10-40F Airplanes AGENCY..., Room W12-140, 1200 New Jersey Avenue, SE., Washington, DC 20590. FOR FURTHER INFORMATION CONTACT... (b) None. Applicability (c) This AD applies to McDonnell Douglas Corporation Model DC- 10-10,...

  7. A new optimum topology switching dc-to-dc converter

    Science.gov (United States)

    Cuk, S.; Middlebrook, R. D.

    1977-01-01

    A novel switching dc-to-dc converter is presented, which has the same general conversion property (increase or decrease of the input dc voltage) as does the conventional buck-boost converter, and which offers through its new optimum topology higher efficiency, lower output voltage ripple, reduced EMI, smaller size and weight, and excellent dynamic response. One of its most significant advantages is that both input and output current are not pulsating but are continuous (essentially dc with small superimposed switching current ripple), thus resulting in a close approximation to the ideal physically nonrealizable dc-to-dc transformer. The converter retains the simplest possible structure with the minimum number of components which, when interconnected in its optimum topology, yield the maximum performance.

  8. Conception de convertisseurs DC/DC à base de MEMS

    OpenAIRE

    Ghandour, Sahar

    2011-01-01

    Current trends towards miniaturization of electronic circuits had led to the advent of System onChip containing different types of circuits indented to perform different functions. These sub-systemsrequire different supply voltages that are delivered from the SoC supply voltage using several DC/DCconverters. Currently, most of the electronic circuits of portable applications use conventional SMPS(switch mode power supply) DC/DC converters containing an inductor element to stock temporally the...

  9. A Novel FPSM Controller for DC-DC Switching Converters

    Institute of Scientific and Technical Information of China (English)

    Yong Feng; Shun-Ping Wang; Ping Luo; Quan-Ming Niu; Zhao-Ji Li

    2007-01-01

    This paper presents a novel fuzzy pulse skip modulation (FPSM) controller for switching direct current to direct current (DC-DC) converters based on fuzzy ratiocination modeling approach. Owing to the optimal consideration during the design and the nonlinear characteristics of the controller, improved dynamic responses of the FPSM controller can be achieved over conventional controllers. Compared with conventional proportion integral derivative (PID) control, FPSM control has 60% lower overshoot and 10% lower setting time under the same input voltage and output load change. The presented approach is general and can be applied to other types of DC-DC converters.

  10. High performance dc-dc conversion with voltage multipliers

    Science.gov (United States)

    Harrigill, W. T.; Myers, I. T.

    1974-01-01

    The voltage multipliers using capacitors and diodes first developed by Cockcroft and Walton in 1932 were reexamined in terms of state of the art fast switching transistors and diodes, and high energy density capacitors. Because of component improvements, the voltage multiplier, used without a transformer, now appears superior in weight to systems now in use for dc-dc conversion. An experimental 100-watt 1000-volt dc-dc converter operating at 100 kHz was built, with a component weight of about 1 kg/kW. Calculated and measured values of output voltage and efficiency agreed within experimental error.

  11. Improved DC Gun Insulator

    Energy Technology Data Exchange (ETDEWEB)

    M.L. Neubauer, K.B. Beard, R. Sah, C. Hernandez-Garcia, G. Neil

    2009-05-01

    Many user facilities such as synchrotron light sources and free electron lasers require accelerating structures that support electric fields of 10-100 MV/m, especially at the start of the accelerator chain where ceramic insulators are used for very high gradient DC guns. These insulators are difficult to manufacture, require long commissioning times, and have poor reliability, in part because energetic electrons bury themselves in the ceramic, creating a buildup of charge and causing eventual puncture. A novel ceramic manufacturing process is proposed. It will incorporate bulk resistivity in the region where it is needed to bleed off accumulated charge caused by highly energetic electrons. This process will be optimized to provide an appropriate gradient in bulk resistivity from the vacuum side to the air side of the HV standoff ceramic cylinder. A computer model will be used to determine the optimum cylinder dimensions and required resistivity gradient for an example RF gun application. A ceramic material example with resistivity gradient appropriate for use as a DC gun insulator will be fabricated by glazing using doping compounds and tested.

  12. [Genetic methods for the reintroduction of primates Saguinus, Aotus and Cebus (Primates: Cebidae) seized in Bogota, Colombia].

    Science.gov (United States)

    Ruiz-García, Manuel; Leguizamón, Norberto; Vásquez, Catalina; Rodríguez, Karen; Castillo, María Ignacia

    2010-09-01

    Primates are one of more confiscated taxa by the environmental authorities in Bogota, Colombia. During 2008, 133 monkeys were confiscated; samples from 115 of them were sequenced by the mitochondrial cythocrome oxidase II gene (mtCOII) and 112 sequences obtained were of high quality. These sequences were compared with those obtained by our research group from individuals directly sampled in the field, with precise geographic origin. So, a more specific geographic area of the Colombian territory could be considered for a correct rehabilitation treatment during the reintroduction of these confiscated animals. The main results with five primate species were: 1--For all the specimens analyzed of Saguinus leucopus, they could be liberated in any geographical area of its distribution range, since only one gene pool was found. 2--For the 14 Aotus sp. individuals sequenced from the SDA (Environmental District Secretariat), one of them (A. vociferans) was coming from the Amazon, seven exemplars belonged to A. griseimembra from the Magdalena Valley and the Colombian Caribbean coasts, four individuals represented to A. brumbacki from the Colombian Eastern Llanos, and two were associated to A. azarae azarae from Northern Argentina and Paraguay (which means that illegal traffic of animals is arriving to Colombia from other South-American countries). 3--Out 14 Cebus albifrons sequenced, two belonged to the geographical area of C. a. versicolor, one to C. a. pleei, 10 to C a. leucocephalus and one could be not assigned because its sequence yielded a great genetic divergence with respect to the other specimens sequenced of this species. 4--The two Cebus capucinus sequenced showed to be associated to a gene pool found in the Northern of Chocó, Sucre and Córdoba Departments. 5--Out 11 Cebus apella sequenced, 10 showed to belong to the gene pool presented in the Colombian Eastern Llanos and highly related (but differentiable) to Cebus apella apella from the French Guyana. It could

  13. Hysteretic Current Controlled Zvs Dc/Dc Converter For Automobile

    DEFF Research Database (Denmark)

    Cernat, M.; Scortarul, P.; Tanase, A.

    2007-01-01

    A novel bi-directional dc-dc converter with ZVS and interleaving for dual voltage systems in automobiles is presented. A variable frequency extended band hysteretic current control method is proposed. In comparison with classical fixed frequency current control PWM, the reverse polarity peak curr...

  14. Very High Frequency Half Bridge DC/DC Converter

    DEFF Research Database (Denmark)

    Madsen, Mickey Pierre; Knott, Arnold; Andersen, Michael A. E.

    2014-01-01

    This paper presents the first, off chip, class DE (resonant half bridge) converter working in the Very High Frequency (VHF) range. The benefits of using half bridge circuits both in the inverter and rectifier part of a VHF resonant dc/dc converter are analyzed and design equations for all...

  15. A Plasma-Based DC-DC Electrical Transformer

    Science.gov (United States)

    Nebel, Richard; Finn, John

    2013-10-01

    Previous work has indicated that it may be possible to make DC-DC electrical transformers using plasmas. The mechanism is an MHD electromagnetic relaxation process induced by helical electrodes. This process is now being tested on the Bismark device at Tibbar Technologies.

  16. A Current-Fed Isolated Bidirectional DC-DC Converter

    DEFF Research Database (Denmark)

    Sun, Xiaofeng; Wu, Xiaoying; Shen, Yanfeng;

    2017-01-01

    This paper proposes a current-fed isolated bidirectional DC-DC converter (CF-IBDC) which has the advantages of wide input voltage range, low input current ripple, low conduction losses, and soft switching over the full operating range. Compared with conventional CF-IBDCs, the voltage spikes of th...

  17. SCM Handbooks for dc-to-dc Converters

    Science.gov (United States)

    Lee, F.; Mohmoud, M.; Yu, Y.

    1984-01-01

    Two documents aid in design of control modules for dc-to-dc converters. Features of SCM include: Adaptive stability, power component stress limiting, implementation of various control laws, unified design approach. Analysis and quidelines contained in handbooks enable engineer to design SCM circuit and confidently predict resulting overall performance.

  18. Efficient Design in a DC to DC Converter Unit

    Science.gov (United States)

    Bruemmer, Joel E.; Williams, Fitch R.; Schmitz, Gregory V.

    2002-01-01

    Space Flight hardware requires high power conversion efficiencies due to limited power availability and weight penalties of cooling systems. The International Space Station (ISS) Electric Power System (EPS) DC-DC Converter Unit (DDCU) power converter is no exception. This paper explores the design methods and tradeoffs that were utilized to accomplish high efficiency in the DDCU. An isolating DC to DC converter was selected for the ISS power system because of requirements for separate primary and secondary grounds and for a well-regulated secondary output voltage derived from a widely varying input voltage. A flyback-current-fed push-pull topology or improved Weinberg circuit was chosen for this converter because of its potential for high efficiency and reliability. To enhance efficiency, a non-dissipative snubber circuit for the very-low-Rds-on Field Effect Transistors (FETs) was utilized, redistributing the energy that could be wasted during the switching cycle of the power FETs. A unique, low-impedance connection system was utilized to improve contact resistance over a bolted connection. For improved consistency in performance and to lower internal wiring inductance and losses a planar bus system is employed. All of these choices contributed to the design of a 6.25 KW regulated dc to dc converter that is 95 percent efficient. The methodology used in the design of this DC to DC Converter Unit may be directly applicable to other systems that require a conservative approach to efficient power conversion and distribution.

  19. Dc-To-Dc Converter Uses Reverse Conduction Of MOSFET's

    Science.gov (United States)

    Gruber, Robert P.; Gott, Robert W.

    1991-01-01

    In modified high-power, phase-controlled, full-bridge, pulse-width-modulated dc-to-dc converters, switching devices power metal oxide/semiconductor field-effect transistors (MOSFET's). Decreases dissipation of power during switching by eliminating approximately 0.7-V forward voltage drop in anti-parallel diodes. Energy-conversion efficiency increased.

  20. An organic integrated capacitive DC-DC up-converter

    NARCIS (Netherlands)

    Marien, H.; Steyaert, M.; Steudel, S.; Vicca, P.; Smout, S.; Gelinck, G.H.; Heremans, P.L.

    2010-01-01

    In this paper a fully integrated organic DC-DC upconverter is presented in a pentacene p-type only technology. This 3-stage Dickson converter reaches a voltage conversion factor of 3 for a purely capacitive load and 2.5 for a 10 μA load current. The maximal output voltage goes up to 75 V and the Dic

  1. Sheppard-Taylor Isolated High Boost DC-DC Converter

    DEFF Research Database (Denmark)

    Chub, Andrii; Siwakoti, Yam Prasad; Vinnikov, Dmitri

    2017-01-01

    This paper presents a new galvanically isolated step-up dc-dc converter intended for low-power but high step-up applications. The proposed converter is capable of regulating output voltage within a wide range of the input voltage or load variations. In contrast to competitors, the converter can b...

  2. Early Oscillation Detection Technique for Hybrid DC/DC Converters

    Science.gov (United States)

    Wang, Bright L.

    2011-01-01

    Oscillation or instability is a situation that must be avoided for reliable hybrid DC/DC converters. A real-time electronics measurement technique was developed to detect catastrophic oscillations at early stages for hybrid DC/DC converters. It is capable of identifying low-level oscillation and determining the degree of the oscillation at a unique frequency for every individual model of the converters without disturbing their normal operations. This technique is specially developed for space-used hybrid DC/DC converters, but it is also suitable for most of commercial and military switching-mode power supplies. This is a weak-electronic-signal detection technique to detect hybrid DC/DC converter oscillation presented as a specific noise signal at power input pins. It is based on principles of feedback control loop oscillation and RF signal modulations, and is realized by using signal power spectral analysis. On the power spectrum, a channel power amplitude at characteristic frequency (CPcf) and a channel power amplitude at switching frequency (CPsw) are chosen as oscillation level indicators. If the converter is stable, the CPcf is a very small pulse and the CPsw is a larger, clear, single pulse. At early stage of oscillation, the CPcf increases to a certain level and the CPsw shows a small pair of sideband pulses around it. If the converter oscillates, the CPcf reaches to a higher level and the CPsw shows more high-level sideband pulses. A comprehensive stability index (CSI) is adopted as a quantitative measure to accurately assign a degree of stability to a specific DC/DC converter. The CSI is a ratio of normal and abnormal power spectral density, and can be calculated using specified and measured CPcf and CPsw data. The novel and unique feature of this technique is the use of power channel amplitudes at characteristic frequency and switching frequency to evaluate stability and identify oscillations at an early stage without interfering with a DC/DC converter s

  3. A DC Transformer

    Science.gov (United States)

    Youngquist, Robert C.; Ihlefeld, Curtis M.; Starr, Stanley O.

    2013-01-01

    A component level dc transformer is described in which no alternating currents or voltages are present. It operates by combining features of a homopolar motor and a homopolar generator, both de devices, such that the output voltage of a de power supply can be stepped up (or down) with a corresponding step down (or up) in current. The basic theory for this device is developed, performance predictions are made, and the results from a small prototype are presented. Based on demonstrated technology in the literature, this de transformer should be scalable to low megawatt levels, but it is more suited to high current than high voltage applications. Significant development would be required before it could achieve the kilovolt levels needed for de power transmission.

  4. DC Microgrids—Part II

    DEFF Research Database (Denmark)

    Dragicevic, Tomislav; Lu, Xiaonan; Quintero, Juan Carlos Vasquez

    2016-01-01

    distribution applications such as traction, telecom, vehicular and distributed power systems can be classified under DC MG framework and ongoing development and expansion of the field is largely influenced by concepts used over there. This paper aims firstly to shed light on the practical design aspects of DC...

  5. Relación entre la capacitación y el nivel de participación de los archivistas en el desarrollo del programa de gobierno en línea de Bogotá/Relation between training and participation level of archivists in the development of Bogota's "gobierno en línea" project

    National Research Council Canada - National Science Library

    Carlos Alberto Zapata

    2012-01-01

    ... in the Capital District of Bogota, taking as reference the General Archives Law. The obtained results show the little commitment that archivists have to the development of the e-government model...

  6. Modular Power System Configured with Standard Product Hybrid DC-DC Converters Project

    Data.gov (United States)

    National Aeronautics and Space Administration — VPT proposes an innovative concept whereby complex, multiple-output, DC-DC converter systems can be configured through use of only 2 standard product hybrid DC-DC...

  7. Triple voltage dc-to-dc converter and method

    Science.gov (United States)

    Su, Gui-Jia

    2008-08-05

    A circuit and method of providing three dc voltage buses and transforming power between a low voltage dc converter and a high voltage dc converter, by coupling a primary dc power circuit and a secondary dc power circuit through an isolation transformer; providing the gating signals to power semiconductor switches in the primary and secondary circuits to control power flow between the primary and secondary circuits and by controlling a phase shift between the primary voltage and the secondary voltage. The primary dc power circuit and the secondary dc power circuit each further comprising at least two tank capacitances arranged in series as a tank leg, at least two resonant switching devices arranged in series with each other and arranged in parallel with the tank leg, and at least one voltage source arranged in parallel with the tank leg and the resonant switching devices, said resonant switching devices including power semiconductor switches that are operated by gating signals. Additional embodiments having a center-tapped battery on the low voltage side and a plurality of modules on both the low voltage side and the high voltage side are also disclosed for the purpose of reducing ripple current and for reducing the size of the components.

  8. The public libraries as a subjective integration spaces: A case study in La Peña public Library of BibloRed, in Bogota, Colombia

    Directory of Open Access Journals (Sweden)

    Alejandro Toro Peña

    2014-04-01

    Full Text Available The proposed research addresses how public libraries in popular contexts can realize processes of collective subjectivity from their library services. An analysis of these libraries as agencies for the construction of the public sphere is carried out through a case study in a public library of Bogota, Colombia. It was initially proposed to illustrate the way in which the public library has addressed the question of what is a public library and what is its social and political role, identifying the reasons that we believe are necessary questioned by the social sciences. Then, reviewing the theories of subjectivity and collective subjectivity, an instrument for qualitative inquiries was built around the category of collective subjectivity, allowing to explore from subjective narratives of users, the elements to describe the processes from the selected public library. Finally, considerations are presented about public libraries as agencies of social and cultural processes, involved in training and participation scenarios.

  9. GaN Microwave DC-DC Converters

    Science.gov (United States)

    Ramos Franco, Ignacio

    Increasing the operating frequency of switching converters can have a direct impact in the miniaturization and integration of power converters. The size of energy-storage passive components and the difficulty to integrate them with the rest of the circuitry is a major challenge in the development of a fully integrated power supply on a chip. The work presented in this thesis attempts to address some of the difficulties encountered in the design of high-frequency converters by applying concepts and techniques usually used in the design of high-efficiency power amplifiers and high-efficiency rectifiers at microwave frequencies. The main focus is in the analysis, design, and characterization of dc-dc converters operating at microwave frequencies in the low gigahertz range. The concept of PA-rectifier duality, where a high-efficiency power amplifier operates as a high-efficiency rectifier is investigated through non-linear simulations and experimentally validated. Additionally, the concept of a self-synchronous rectifier, where a transistor rectifier operates synchronously without the need of a RF source or driver is demonstrated. A theoretical analysis of a class-E self-synchronous rectifier is presented and validated through non-linear simulations and experiments. Two GaN class-E2 dc-dc converters operating at a switching frequency of 1 and 1.2 GHz are demonstrated. The converters achieve 80 % and 75 % dc-dc efficiency respectively and are among the highest-frequency and highest-efficiency reported in the literature. The application of the concepts established in the analysis of a self-synchronous rectifier to a power amplifier culminated in the development of an oscillating, self-synchronous class-E 2 dc-dc converter. Finally, a proof-of-concept fully integrated GaN MMIC class-E 2 dc-dc converter switching at 4.6 GHz is demonstrated for the first time to the best of our knowledge. The 3.8 mm x 2.6 mm chip contains distributed inductors and does not require any

  10. Bi-Directional DC-DC Converter for PHEV Applications

    Energy Technology Data Exchange (ETDEWEB)

    Abas Goodarzi

    2011-01-31

    Plug-In Hybrid Electric Vehicles (PHEV) require high power density energy storage system (ESS) for hybrid operation and high energy density ESS for Electric Vehicle (EV) mode range. However, ESS technologies to maximize power density and energy density simultaneously are not commercially feasible. The use of bi-directional DC-DC converter allows use of multiple energy storage, and the flexible DC-link voltages can enhance the system efficiency and reduce component sizing. This will improve fuel consumption, increase the EV mode range, reduce the total weight, reduce battery initial and life cycle cost, and provide flexibility in system design.

  11. Transformerless DC-DC Converter Using Cockcroft-Walton Voltage Multiplier to Obtain High DC Voltage

    Directory of Open Access Journals (Sweden)

    Meghana G Naik,

    2014-11-01

    Full Text Available In the present scenario the use of transformer for high voltages in converter circuit reduces the overall operating efficiency due to leakage inductance and use of transformer also increases the operational cost. . Therefore the proposed system is implemented with transformer less DC-DC converter so as to obtain high DC voltage with the use of nine stage Cockcroft-Walton (CW voltage multiplier. The proposed converter operates in CCM (continuous conduction mode, so that the converter switch stress, the switching losses are reduced. The DC voltage at the input of the proposed model is low and is boosted up by boost inductor (Ls in DC-DC converter stage and performs inverter operation. The number of stages in CW-voltage multiplier circuit is applied with low input pulsating DC (AC Voltage voltage where it is getting converted to high DC output voltage. The proposed converter switches operates at two independent frequencies, modulating (fsm andalternating (fsc frequency. The fsm operates at higher frequency of the output while the fsc operates at lower frequency of the desired output voltage ripple and the output ripples can be adjusted by the switch Sc1 and Sc2. The regulation of the output voltage is achieved by controlling the Duty ratio.The simulation is carried over by the MATLABSIMULINK.

  12. Normative reference values for the 20 m shuttle‐run test in a population‐based sample of school‐aged youth in Bogota, Colombia: the FUPRECOL study

    Science.gov (United States)

    Palacios‐López, Adalberto; Humberto Prieto‐Benavides, Daniel; Enrique Correa‐Bautista, Jorge; Izquierdo, Mikel; Alonso‐Martínez, Alicia; Lobelo, Felipe

    2016-01-01

    Abstract Objectives Our aim was to determine the normative reference values of cardiorespiratory fitness (CRF) and to establish the proportion of subjects with low CRF suggestive of future cardio‐metabolic risk. Methods A total of 7244 children and adolescents attending public schools in Bogota, Colombia (55.7% girls; age range of 9–17.9 years) participated in this study. We expressed CRF performance as the nearest stage (minute) completed and the estimated peak oxygen consumption (V˙O2peak). Smoothed percentile curves were calculated. In addition, we present the prevalence of low CRF after applying a correction factor to account for the impact of Bogota's altitude (2625 m over sea level) on CRF assessment, and we calculated the number of participants who fell below health‐related FITNESSGRAM cut‐points for low CRF. Results Shuttles and V˙O2peak were higher in boys than in girls in all age groups. In boys, there were higher levels of performance with increasing age, with most gains between the ages of 13 and 17. The proportion of subjects with a low CRF, suggestive of future cardio‐metabolic risk (health risk FITNESSGRAM category) was 31.5% (28.2% for boys and 34.1% for girls; X2 P = .001). After applying a 1.11 altitude correction factor, the overall prevalence of low CRF was 11.5% (9.6% for boys and 13.1% for girls; X2 P = .001). Conclusions Our results provide sex‐ and age‐specific normative reference standards for the 20 m shuttle‐run test and estimated V˙O2peak values in a large, population‐based sample of schoolchildren from a large Latin‐American city at high altitude. PMID:27500986

  13. An Efficient DC- DC Converter with Bidirectional Power Flow

    Directory of Open Access Journals (Sweden)

    N.RAJARAJESWARI

    2008-07-01

    Full Text Available This paper introduces a Bi-directional DC-DC converter with adaptive fuzzy logic controller. Bidirectional power flow is obtained by same power components and provides a simple, efficient, and galvanically isolated converter. In the presence of DC mains the converter operates as buck converter and charges the battery. When the DC mains fails, the converter operates as boost converter and the down stream converter is fed by the battery. The power switches are controlled by Pulse Width Modulation technique and the pulses are generated by the application of fuzzy logic with an adoption algorithm. The proposed converter is simulated using MATLAB and laboratory prototype was developed to validate the simulation results.

  14. Fuzzy Control of DC-DC Converters with Input Constraint

    Directory of Open Access Journals (Sweden)

    D. Saifia

    2012-01-01

    Full Text Available This paper proposes a method for designing fuzzy control of DC-DC converters under actuator saturation. Because linear control design methods do not take into account the nonlinearity of the system, a T-S fuzzy model and a controller design approach is used. The designed control not only handles the external disturbance but also the saturation of duty cycle. The input constraint is first transformed into a symmetric saturation which is represented by a polytopic model. Stabilization conditions for the state feedback system of DC-DC converters under actuator saturation are established using the Lyapunov approach. The proposed method has been compared and verified with a simulation example.

  15. General-purpose fuzzy controller for dc-dc converters

    Energy Technology Data Exchange (ETDEWEB)

    Mattavelli, P.; Rossetto, L.; Spiazzi, G.; Tenti, P. [Univ. of Padova (Italy)

    1997-01-01

    In this paper, a general-purpose fuzzy controller for dc-dc converters is investigated. Based on a qualitative description of the system to be controlled, fuzzy controllers are capable of good performances, even for those systems where linear control techniques fail, e.g., when a mathematical description is not available or is in the presence of wide parameter variations. The presented approach is general and can be applied to any dc-dc converter topologies. Controller implementation is relatively simple and can guarantee a small-signal response as fast and stable as other standard regulators and an improved large-signal response. Simulation results of Buck-Boost and Sepic converters show control potentialities.

  16. Step-Up DC-DC Power Converter

    DEFF Research Database (Denmark)

    2015-01-01

    The present invention relates to a step-up DC-DC power converter which comprises a primary side circuit and a secondary side circuit coupled through a galvanic isolation barrier. The primary side circuit comprises a positive and a negative input terminal for receipt of an input voltage and an input...... being charged from the input voltage and discharged to the output capacitor through the galvanic isolation barrier in accordance with a switch control signal to produce the converter output voltage. The step-up DC-DC power converter comprises an electrical short-circuit connection across the galvanic...... capacitor coupled between the positive and negative input terminals and the secondary side circuit comprises an output capacitor chargeable to a converter output voltage between a first positive electrode and a second negative electrode. A switched energy storage network is configured for alternatingly...

  17. A Novel High Gain DC-DC Step up Converter

    Directory of Open Access Journals (Sweden)

    M. Al Mamun

    2016-07-01

    Full Text Available High gain dc-dc converters are widely used to maximize the energy harvest for renewable energy systems, for example, photovoltaic systems and fuel cell. Conventional boost converters usually operates at extreme duty cycle to obtain high voltage gain. Operation at extreme duty cycle leads to reverse recovery problem at the switches, high conduction loss, electromagnetic interference etc. This paper proposes a very high gain dc-dc step up converter operating at very low duty cycle (i.e. duty cycle <0.5. The additional advantage of the proposed converter is that a single control signal is used for the switches which reduces the operation complexity. The steady-state theoretical analysis described in this paper is finally verified by simulation results

  18. Decentralized Interleaving of Paralleled Dc-Dc Buck Converters: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Brian B [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Rodriguez, Miguel [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-09-01

    We present a decentralized control strategy that yields switch interleaving among parallel connected dc-dc buck converters without communication. The proposed method is based on the digital implementation of the dynamics of a nonlinear oscillator circuit as the controller. Each controller is fully decentralized, i.e., it only requires the locally measured output current to synthesize the pulse width modulation (PWM) carrier waveform. By virtue of the intrinsic electrical coupling between converters, the nonlinear oscillator-based controllers converge to an interleaved state with uniform phase-spacing across PWM carriers. To the knowledge of the authors, this work represents the first fully decentralized strategy for switch interleaving of paralleled dc-dc buck converters.

  19. Active pre-filters for dc/dc Boost regulators

    Directory of Open Access Journals (Sweden)

    Carlos Andrés Ramos-Paja

    2014-07-01

    Full Text Available This paper proposes an active pre-filter to mitigate the current harmonics generated by classical dc/dc Boost regulators, which generate current ripples proportional to the duty cycle. Therefore, high output voltage conditions, i.e., high voltage conversion ratios, produce high current harmonics that must be filtered to avoid damage or source losses. Traditionally, these current components are filtered using electrolytic capacitors, which introduce reliability problems because of their high failure rate. The solution introduced in this paper instead uses a dc/dc converter based on the parallel connection of the Boost canonical cells to filter the current ripples generated by the Boost regulator, improving the system reliability. This solution provides the additional benefits of improving the overall efficiency and the voltage conversion ratio. Finally, the solution is validated with simulations and experimental results.

  20. A Feed-Forward Control Realizing Fast Response for Three-Branch Interleaved DC-DC Converter in DC Microgrid

    DEFF Research Database (Denmark)

    Wang, Haojie; Han, Minxiao; Yan, Wenli

    2016-01-01

    It is a common practice for storage batteries to be connected to DC microgrid buses through DC-DC converters for voltage support on islanded operation mode. A feed-forward control based dual-loop constant voltage PI control for three-branch interleaved DC-DC converters (TIDC) is proposed for stor......It is a common practice for storage batteries to be connected to DC microgrid buses through DC-DC converters for voltage support on islanded operation mode. A feed-forward control based dual-loop constant voltage PI control for three-branch interleaved DC-DC converters (TIDC) is proposed...... for storage batteries in DC microgrids. The working principle of TIDC is analyzed, and the factors influencing the response rate based on the dual-loop constant voltage control for TIDC are discussed, and then the method of feed-forward control for TIDC is studied to improve the response rate for load...

  1. DC-SIGN/DC-SIGNR基因多态性与病原微生物感染%Polymorphisms of DC-SIGN/DC-SIGNR and pathogen infection

    Institute of Scientific and Technical Information of China (English)

    许利军; 潘晨; 李勤光

    2010-01-01

    DC-SIGN和DC-SIGNR是两种表达于DC表面的蛋白,被认为是许多病原微生物的黏附受体,参与很多病原微生物的感染.DC-SIGN和DC-SIGNR(DC-SIGN/DC-SIGNR)的多态性或许影响病原微生物的感染过程和结果.此文对DC-SIGN/DC-SIGNR的结构功能以及与HIV、HCV感染、肺结核、登革热的关系进行了综述.%DC-SIGN and DC-SIGNR are two surface proteins on dendritic cells with complex stmction, and are regarded as attachment receptors of many pathogens, DC-SIGN/DC-SIGNR participate in pathogen infection.Polymorphisms of DC-SIGN/DC-SIGNR probably influence the procedure and outcome of pathogen infection. In this article, the structure and function of DC-SIGN/DC-SIGNR are discussed as well as the relation between the DC-SIGN/DC-SIGNR and pathogens such as HIV, HCV infection, pulmonary tuberculosis, dengue fever.

  2. DC injection into low voltage AC networks

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    This report summarises the results of a study investigating the impact of levels of injected DC current injections on a low voltage AC distribution network systems in order to recommend acceptable limits of DC from microgeneration. Relevant literature is reviewed, and the impact of DC levels in distribution transformers, transformer modelling, and instrumental transformers are discussed. The impact of DC in residual current devices (RCD) and in domestic electricity watt hour meters is examined along with DC enhanced corrosion, corrosion failure, and the measurement of DC current injection. Sources of DC injection outlined include DC from computer power supplies, network faults, geomagnetic phenomena, lighting circuits/dimmers, and embedded generators.

  3. DC-Compensated Current Transformer.

    Science.gov (United States)

    Ripka, Pavel; Draxler, Karel; Styblíková, Renata

    2016-01-20

    Instrument current transformers (CTs) measure AC currents. The DC component in the measured current can saturate the transformer and cause gross error. We use fluxgate detection and digital feedback compensation of the DC flux to suppress the overall error to 0.15%. This concept can be used not only for high-end CTs with a nanocrystalline core, but it also works for low-cost CTs with FeSi cores. The method described here allows simultaneous measurements of the DC current component.

  4. Modified Multiport Dc-Dc Converter Topology For Smart Grid

    Directory of Open Access Journals (Sweden)

    Dhamodharan Shanmugam

    2013-10-01

    Full Text Available The development of a Solid State Transformer (SST that incorporates a DC-DC multiport converter to integrate both photovoltaic (PV power generation and battery energy storage is presented in this dissertation. The DC-DC stage is based on a quad active-bridge (QAB converter which not only provides isolation for the load, but also for the PV and storage. The AC-DC stage is implemented with a pulse-widthmodulated (PWM single phase rectifier. A unified gyrator-based average model is developed for a general multi-active-bridge (MAB converter controlled through phase-shift modulation (PSM. Expressions to determine the power rating of the MAB ports are also derived. The developed gyrator-based average model is applied to the QAB converter for faster simulations of the proposed SST during the control design process as well for deriving the state-space representation of the plant. Both linear quadratic regulator (LQR and singleinput-single-output (SISO types of controllers are designed for the DC-DC stage. A novel technique that complements the SISO controller by taking into account the cross coupling characteristics of the QAB converter is also presented herein. Cascaded SISO controllers are designed for the AC-DC stage. The QAB demanded power is calculated at the QAB controls and then fed into the rectifier controls in order to minimize the effect of the interaction between the two SST stages. The dynamic performance of the designed control loops based on the proposed control strategies are verified through extensive simulation of the SST average and switching models.

  5. Emissions Tests Of Two Dc-To-Dc Converters

    Science.gov (United States)

    Mclyman, W. T.

    1992-01-01

    Report describes tests to characterize unwanted electric and magnetic fields, at frequencies up to few megahertz, radiated by two dc-to-dc converters, one 20-kHz square-wave converter; the other, a 33-kHz sine-wave converter. Part of effort to develop "quiet" power converter for use aboard spacecraft. Converter required to interfere minimally with delicate instruments measuring electric and magnetic fields.

  6. Hybrid battery with bi-directional DC/DC converter

    Directory of Open Access Journals (Sweden)

    DUDRIK Jaroslav

    2010-05-01

    Full Text Available Bi-directional buck-boost DC/DC converterfor hybrid battery is described in this paper. The firstpart of the paper is aimed at concept of hybrid battery;main advance compared to conventional accumulatoris explained there. Control circuit with UC3637 andpower circuit of the converter are described in thesecond part of the paper. Experimental results frommeasuring of converter are mentioned in the last part.

  7. Digital Control Technologies for Modular DC-DC Converters

    Science.gov (United States)

    Button, Robert M.; Kascak, Peter E.; Lebron-Velilla, Ramon

    2002-01-01

    Recent trends in aerospace Power Management and Distribution (PMAD) systems focus on using commercial off-the-shelf (COTS) components as standard building blocks. This move to more modular designs has been driven by a desire to reduce costs and development times, but is also due to the impressive power density and efficiency numbers achieved by today's commercial DC-DC converters. However, the PMAD designer quickly learns of the hidden "costs" of using COTS converters. The most significant cost is the required addition of external input filters to meet strict electromagnetic interference (MIAMI) requirements for space systems. In fact, the high power density numbers achieved by the commercial manufacturers are greatly due to the lack of necessary input filters included in the COTS module. The NASA Glenn Research Center is currently pursuing a digital control technology that addresses this problem with modular DC-DC converters. This paper presents the digital control technologies that have been developed to greatly reduce the input filter requirements for paralleled, modular DC-DC converters. Initial test result show that the input filter's inductor size was reduced by 75 percent, and the capacitor size was reduced by 94 percent while maintaining the same power quality specifications.

  8. Linking DC together with TRSL

    DEFF Research Database (Denmark)

    Haxthausen, Anne Elisabeth; Yong, X.

    2000-01-01

    Duration Calculus (DC) is an interval-based real-time logic, which can be used in capturing and eliciting users' real-time requirements. The Timed RAISE Specification Language (TRSL) is an extension of the RAISE Specification Language with real-time features. This paper links DC and TRSL together...... approach for linking state-based real-time logics together with event-based, timed process algebra languages....

  9. DC superconducting fault current limiter

    Science.gov (United States)

    Tixador, P.; Villard, C.; Cointe, Y.

    2006-03-01

    There is a lack of satisfying solutions for fault currents using conventional technologies, especially in DC networks, where a superconducting fault current limiter could play a very important part. DC networks bring a lot of advantages when compared to traditional AC ones, in particular within the context of the liberalization of the electric market. Under normal operation in a DC network, the losses in the superconducting element are nearly zero and only a small, i.e. a low cost, refrigeration system is then required. The absence of zero crossing of a DC fault current favourably accelerates the normal zone propagation. The very high current slope at the time of the short circuit in a DC grid is another favourable parameter. The material used for the experiments is YBCO deposited on Al2O3 as well as YBCO coated conductors. The DC limitation experiments are compared to AC ones at different frequencies (50-2000 Hz). Careful attention is paid to the quench homogenization, which is one of the key issues for an SC FCL. The University of Geneva has proposed constrictions. We have investigated an operating temperature higher than 77 K. As for YBCO bulk, an operation closer to the critical temperature brings a highly improved homogeneity in the electric field development. The material can then absorb large energies without degradation. We present tests at various temperatures. These promising results are to be confirmed over long lengths.

  10. Simulation and Implementation of Quasi Resonant DC-DC Converter

    Directory of Open Access Journals (Sweden)

    N. Devarajan

    2012-01-01

    Full Text Available Problem statement: A half-bridge LLC resonant converter with a voltage doubler rectifier has a simple structure and its Zero-Voltage-Switching (ZVS capability is excellent from zero to full load condition. But conduction loss is more due to high circulating energy thus reducing the system efficiency. Moreover a variable frequency control method makes the control circuits more complicated than those using the Pulse Width Modulation (PWM control method. Thus, DC drive has lower efficiency when it operates on light loads. Approach: To improve the efficiency of the DC drive under light loads, a PWM-controlled quasi-resonant converter is proposed .It has simple control circuits and less conduction loss compared to a half-bridge LLC resonant converter under light load conditions. The proposed converter has a half-bridge LLC resonant converter along with an auxiliary circuit. The load regulation of the proposed converter can be achieved by an auxiliary circuit. Thus the proposed converter is expected to be suitable sustaining power module for the efficiency enhancement of DC drives. As the magnetizing inductance of the proposed converter is larger the circulating energy is considerably reduced under light load conditions. In this study the operational principle, design and modeling of QRC DC-DC converters for DC drives are presented. The PWM controlled quasi resonant converter is implemented using PIC microcontroller 16F184A. Results: The capacitor filter in the output is replaced by pi filter to produce DC with minimum ripple. The experimental results and simulation results are compared. This converter has the advantages like reduced number of switches, reduced transformer and filter size, reduced ripple, reduced switching losses, reduced switching stresses and increased power density. Conclusion: The experimental results closely agree with the simulation results.

  11. Mono-switch AC-DC/DC-DC converter for single-phase UPS%单相UPS的单开关AC-DC/DC-DC变换电路

    Institute of Scientific and Technical Information of China (English)

    李宋; 叶满园; 袁义生

    2011-01-01

    A mono-switch AC-DC/DC-DC converter used in single-phase UPS system is introduced,which consists of one power switch and six diodes. As both AC-DC rectifier and DC-DC booster,its operating modes and working principle are detailed. The single-cycle nonlinear control is adopted,which applies two low-speed PI regulators to control the voltage of two capacitors on DC link and a high-speed PI regulator to control the input current. Simulative results prove that,being simple and reliable,it outputs stable DC bus voltage with high input power factor and low THD.%介绍了一种应用在单相UPS系统中的新型单开关AC-DC/DC-DC变换电路,该电路由1个功率开关器件和6个二极管组成,能够实现AC/DC整流和DC/DC升压2种功能.在详细分析了该电路运行模式及工作原理的基础上,采用了单周期非线性控制理论对其进行控制,利于2个低速PI调节器对直流母线上的2个电容器电压进行控制,1个高速PI调节器对输入电流进行控制.仿真结果表明,该电路简单可靠,输入功率因数高,电流谐波失真小,可以获得稳定的正负直流母线电压.

  12. DC Hierarchical Control System for Microgrid Applications

    OpenAIRE

    Lu, Xiaonan; Sun, Kai; Guerrero, Josep M.; Huang, Lipei

    2013-01-01

    In order to enhance the DC side performance of AC-DC hybrid microgrid,a DC hierarchical control system is proposed in this paper.To meet the requirement of DC load sharing between the parallel power interfaces,droop method is adopted.Meanwhile,DC voltage secondary control is employed to restore the deviation in the DC bus voltage.The hierarchical control system is composed of two levels.DC voltage and AC current controllers are achieved in the primary control level.

  13. Pulsewidth modulated DC-to-DC power conversion circuits, dynamics, and control designs

    CERN Document Server

    Choi, Byungcho

    2013-01-01

    This is the definitive reference for anyone involved in pulsewidth modulated DC-to-DC power conversion Pulsewidth Modulated DC-to-DC Power Conversion: Circuits, Dynamics, and Control Designs provides engineers, researchers, and students in the power electronics field with comprehensive and complete guidance to understanding pulsewidth modulated (PWM) DC-to-DC power converters. Presented in three parts, the book addresses the circuitry and operation of PWM DC-to-DC converters and their dynamic characteristics, along with in-depth discussions of control design of PWM DC-to

  14. DC-DC converter for discharging energy storage magnets

    Science.gov (United States)

    Eyssa, Yehia M.; Huang, Xianrui

    1994-07-01

    A new DC-DC converter to control the output power delivered from a magnetic energy storage magnet or an equivalent current source is discussed. The circuit consists of: (1) highly coupled transformer (air or iron core) with coupling coefficient better than 0.95; (2) low frequency mechanical or superconducting switches (0.1 - 10 Hz) or high frequency (10 - 1000 Hz) GTO switches depending on the application; and (3) small voltage source (capacitor or battery) to control the output voltage. Two examples illustrating the application of this circuit are discussed. They are a step up dc current converter for use in uninterruptible power supplies and a step down one for use in discharging large current storage coil into a small current load. The efficiency expected to exceed 90%.

  15. Pulse-width modulated DC-DC power converters

    CERN Document Server

    Kazimierczuk, Marian K

    2008-01-01

    This book studies switch-mode power supplies (SMPS) in great detail. This type of converter changes an unregulated DC voltage into a high-frequency pulse-width modulated (PWM) voltage controlled by varying the duty cycle, then changes the PWM AC voltage to a regulated DC voltage at a high efficiency by rectification and filtering. Used to supply electronic circuits, this converter saves energy and space in the overall system. With concept-orientated explanations, this book offers state-of-the-art SMPS technology and promotes an understanding of the principle operations of PWM converters,

  16. Radiated electromagnetic emissions of DC-DC converters

    Energy Technology Data Exchange (ETDEWEB)

    Feld, L; Jussen, R; Karpinski, W; Klein, K; Sammet, J; Wlochal, M, E-mail: sammet@cern.ch [Physikalisches Institut IB, RWTH Aachen University, Aachen (Germany)

    2010-12-15

    For the CMS tracker at SLHC a new powering scheme is considered to be mandatory to allow the detector to provide at least the same performance as today at the LHC. The baseline solution of CMS foresees the use of DC-DC converters to provide larger currents with smaller losses. An important component of most converters are inductors which, however, tend to radiate the switching noise generated by the converter. The emissions of different inductors have been measured and simulated, the coil design has been optimized and noise susceptibility measurements, with present CMS hardware, have been performed. This article summarizes the results.

  17. Radiated electromagnetic emissions of DC-DC converters

    CERN Document Server

    Sammet, Jan Domenik

    2010-01-01

    A new powering scheme is considered to be mandatory for the CMS tracker at SLHC. The baseline solution of CMS foresees the use of DC-DC converters, allowing to provide larger currents while reducing losses. An important component of most converters are inductors, which, however, tend to radiate the switching noise generated by the converter. The radiated emissions of several converters have been measured and simulated. In addition noise susceptibility measurements with radiated noise and present CMS hardware have been performed. A summary of the results will be presented.

  18. Low dose failures of hardened DC-DC power converters

    Science.gov (United States)

    Lehman, J.; Yui, C.; Rax, B. G.; Miyahira, T. F.; Weideman, M.; Schrick, P.; Swift, G. M.; Johnston, A. H.

    2002-01-01

    Box-level total dose testing of the FOG (Fiber Optic Gyro) by IXSEA at ESA's GammabeamFacility were abruptly terminated at 8krad (Si) due to catastrophic failure (complete shutdown). This was unexpected because all components within the gyro were supposedly radiation tolerant. Further testing showed that the components responsible for the failure were two DC-DC converters, manufactured by Interpoint, that stopped regulating shortly before shutdown. This paper summarizes diagnostic test results for the converters to determine the underlying cause of the unexpected failure at low levels of radiation.

  19. Power flow analysis for DC voltage droop controlled DC microgrids

    DEFF Research Database (Denmark)

    Li, Chendan; Chaudhary, Sanjay; Dragicevic, Tomislav

    2014-01-01

    This paper proposes a new algorithm for power flow analysis in droop controlled DC microgrids. By considering the droop control in the power flow analysis for the DC microgrid, when compared with traditional methods, more accurate analysis results can be obtained. The algorithm verification...... is carried out by comparing the calculation results with detailed time domain simulation results. With the droop parameters as variables in the power flow analysis, their effects on power sharing and secondary voltage regulation can now be analytically studied, and specialized optimization in the upper level...... control can also be made accordingly. Case studies on power sharing and secondary voltage regulation are carried out using proposed power flow analysis....

  20. A Statistical Method for Estimating Missing GHG Emissions in Bottom-Up Inventories: The Case of Fossil Fuel Combustion in Industry in the Bogota Region, Colombia

    Science.gov (United States)

    Jimenez-Pizarro, R.; Rojas, A. M.; Pulido-Guio, A. D.

    2012-12-01

    The development of environmentally, socially and financially suitable greenhouse gas (GHG) mitigation portfolios requires detailed disaggregation of emissions by activity sector, preferably at the regional level. Bottom-up (BU) emission inventories are intrinsically disaggregated, but although detailed, they are frequently incomplete. Missing and erroneous activity data are rather common in emission inventories of GHG, criteria and toxic pollutants, even in developed countries. The fraction of missing and erroneous data can be rather large in developing country inventories. In addition, the cost and time for obtaining or correcting this information can be prohibitive or can delay the inventory development. This is particularly true for regional BU inventories in the developing world. Moreover, a rather common practice is to disregard or to arbitrarily impute low default activity or emission values to missing data, which typically leads to significant underestimation of the total emissions. Our investigation focuses on GHG emissions by fossil fuel combustion in industry in the Bogota Region, composed by Bogota and its adjacent, semi-rural area of influence, the Province of Cundinamarca. We found that the BU inventories for this sub-category substantially underestimate emissions when compared to top-down (TD) estimations based on sub-sector specific national fuel consumption data and regional energy intensities. Although both BU inventories have a substantial number of missing and evidently erroneous entries, i.e. information on fuel consumption per combustion unit per company, the validated energy use and emission data display clear and smooth frequency distributions, which can be adequately fitted to bimodal log-normal distributions. This is not unexpected as industrial plant sizes are typically log-normally distributed. Moreover, our statistical tests suggest that industrial sub-sectors, as classified by the International Standard Industrial Classification (ISIC

  1. Switching coordination of distributed dc-dc converters for highly efficient photovoltaic power plants

    Science.gov (United States)

    Agamy, Mohammed; Elasser, Ahmed; Sabate, Juan Antonio; Galbraith, Anthony William; Harfman Todorovic, Maja

    2014-09-09

    A distributed photovoltaic (PV) power plant includes a plurality of distributed dc-dc converters. The dc-dc converters are configured to switch in coordination with one another such that at least one dc-dc converter transfers power to a common dc-bus based upon the total system power available from one or more corresponding strings of PV modules. Due to the coordinated switching of the dc-dc converters, each dc-dc converter transferring power to the common dc-bus continues to operate within its optimal efficiency range as well as to optimize the maximum power point tracking in order to increase the energy yield of the PV power plant.

  2. Optimization of control sequences for DC-DC-converters; Optimierung der Stellgroessenfolge eines DC-DC-Wandler

    Energy Technology Data Exchange (ETDEWEB)

    Kroeger, Claus [Hochschule Aalen (Germany). Wirtschaftsingenieurwesen

    2009-07-01

    DC-DC-Converters are used in power electronics to adapt different voltage levels of electrical sources and sinks with respect of high efficiency. To minimize electrical losses these power electronic converters always work with switching power semiconductors. This switching principle of the converter is causing a control constraint which limits the achievable performance for the voltage control drastically. This paper presents an optimization for the control sequence in a high dynamic converter control which is based on the dead-beat control design. Thus the non-avoidable control constraint will not be violated. (orig.)

  3. An Integrated Multifunctional Bidirectional AC/DC and DC/DC Converter for Electric Vehicles Applications

    Directory of Open Access Journals (Sweden)

    Liwen Pan

    2016-06-01

    Full Text Available This paper presents an on-board vehicular battery charger that integrates bidirectional AC/DC converter and DC/DC converter to achieve high power density for application in electric vehicles (EVs. The integrated charger is able to transfer electrical energy between the battery pack and the electric traction system and to function as an AC/DC battery charger. The integrated charger topology is presented and the design of passive components is discussed. The control schemes are developed for motor drive system and battery-charging system with a power pulsation reduction circuit. Simulation results in MATLAB/Simulink and experiments on a 30-kW motor drive and 3.3-kW AC/DC charging prototype validate the performance of the proposed technology. In addition, power losses, efficiency comparison and thermal stress for the integrated charger are illustrated. The results of the analyses show the validity of the advanced integrated charger for electric vehicles.

  4. Quasi Y-Source Boost DC-DC Converter

    DEFF Research Database (Denmark)

    Siwakoti, Yam P.; Blaabjerg, Frede; Loh, Poh Chiang

    2015-01-01

    A new topology called “quasi-Y-source impedance network” is presented in this paper. It inherits all the advantages of the original Y-source network. In addition, the new topology draws continuous current from the source which is required for many renewable sources. It also has dc-current-blockin...

  5. Experiments with a DC Motor

    Science.gov (United States)

    Kraftmakher, Yaakov

    2010-01-01

    Experiments with an electric motor provide good opportunity to demonstrate some basic laws of electricity and magnetism. The aim of the experiments with a low-power dc motor is to show how the motor approaches its steady rotation and how its torque, mechanical power and efficiency depend on the rotation velocity. The tight relationship between the…

  6. Effect of particulate matter less than 10μm (PM10 on mortality in Bogota, Colombia: a time-series analysis, 1998-2006

    Directory of Open Access Journals (Sweden)

    Luis Camilo Blanco-Becerra

    2014-07-01

    Full Text Available Objective. To analyze the association between daily mortality from different causes and acute exposure to particulate matter less than 10 microns in aerodynamic diameter (PM10, in Bogota, Colombia. Materials and methods. A time-series ecological study was conducted from 1998 to 2006. The association between mortality (due to different causes and exposure was analyzed using single and distributed lag models and adjusting for potential confounders. Results. For all ages, the cumulative effect of acute mortality from all causes and respiratory causes increased 0.71% (95%CI 0.46-0.96 and 1.43% (95%CI 0.85-2.00, respectively, per 10μg/m3 increment in daily average PM10 with a lag of three days before death. Cumulative effect of mortality from cardiovascular causes was -0.03% (95%CI -0.49-0.44% with the same lag. Conclusions. The results suggest an association between an increase in PM10 concentrations and acute mortality from all causes and respiratory causes.

  7. 75 FR 62331 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-9-14, DC-9-15, and DC-9-15F...

    Science.gov (United States)

    2010-10-08

    ... Directives; McDonnell Douglas Corporation Model DC- 9-14, DC-9-15, and DC-9-15F Airplanes; and DC-9-20, DC-9-30, DC-9-40, and DC-9-50 Series Airplanes AGENCY: Federal Aviation Administration (FAA), DOT. ACTION... Floor, Room W12-140, 1200 New Jersey Avenue, SE., Washington, DC 20590. Hand Delivery: Deliver to...

  8. 76 FR 39251 - Airworthiness Directives; The Boeing Company Model DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD...

    Science.gov (United States)

    2011-07-06

    ... Model DC-9-81 (MD- 81), DC-9-82 (MD-82), DC-9-83 (MD-83), DC-9-87 (MD-87), and MD-88 Airplanes AGENCY... Jersey Avenue, SE., Washington, DC 20590. FOR FURTHER INFORMATION CONTACT: Roger Durbin, Aerospace.... Applicability (c) This AD applies to all The Boeing Company Model DC-9-81 (MD- 81), DC-9-82 (MD-82), DC-9-83...

  9. 76 FR 53346 - Airworthiness Directives; The Boeing Company Model DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD...

    Science.gov (United States)

    2011-08-26

    ... Model DC-9-81 (MD- 81), DC-9-82 (MD-82), DC-9-83 (MD-83), DC-9-87 (MD-87), and MD-88 Airplanes AGENCY... Jersey Avenue, SE., Washington, DC 20590. Hand Delivery: Deliver to Mail address above between 9 a.m. and...) This AD applies to The Boeing Company Model DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD-83),...

  10. 76 FR 1993 - Airworthiness Directives; The Boeing Company Model DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD...

    Science.gov (United States)

    2011-01-12

    ... Model DC-9-81 (MD- 81), DC-9-82 (MD-82), DC-9-83 (MD-83), DC-9-87 (MD-87), and MD-88 Airplanes AGENCY... Ground Floor, Room W12-140, 1200 New Jersey Avenue, SE., Washington, DC 20590. FOR FURTHER INFORMATION.... Applicability (c) This AD applies to The Boeing Company Model DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83...

  11. 76 FR 41651 - Airworthiness Directives; The Boeing Company Model DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD...

    Science.gov (United States)

    2011-07-15

    ... Model DC-9-81 (MD- 81), DC-9-82 (MD-82), DC-9-83 (MD-83), DC-9-87 (MD-87), and MD-88 Airplanes AGENCY... Ground Floor, Room W12-140, 1200 New Jersey Avenue, SE., Washington, DC 20590. FOR FURTHER INFORMATION...) This AD applies to The Boeing Company Model DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD-83),...

  12. 75 FR 68686 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-9-14, DC-9-15, and DC-9-15F...

    Science.gov (United States)

    2010-11-09

    ...; AD 2010-23-10] RIN 2120-AA64 Airworthiness Directives; McDonnell Douglas Corporation Model DC- 9-14, DC-9-15, and DC-9-15F Airplanes; and Model DC-9-20, DC-9-30, DC- 9-40, and DC-9-50 Series Airplanes... Ground Floor, Room W12-140, 1200 New Jersey Avenue, SE., Washington, DC 20590. FOR FURTHER...

  13. DC motor operation controlled from a DC/DC power converter in pulse mode with low duty cycle

    OpenAIRE

    Stefanov, Goce; Kukuseva, Maja; Citkuseva Dimitrovska, Biljana

    2016-01-01

    In this paper pulse mode of operation of DC motor controlled by DC/DC power converter is analyzed. DC motor operation with time intervals in which the motor operates without output load is of interest. In this mode it is possible the motor to restore energy. Also, in the paper are represented calculations for the amount of the restored energy in the pulse mode operation of the motor for different duty cycles.

  14. DC to DC power converters and methods of controlling the same

    Science.gov (United States)

    Steigerwald, Robert Louis; Elasser, Ahmed; Sabate, Juan Antonio; Todorovic, Maja Harfman; Agamy, Mohammed

    2012-12-11

    A power generation system configured to provide direct current (DC) power to a DC link is described. The system includes a first power generation unit configured to output DC power. The system also includes a first DC to DC converter comprising an input section and an output section. The output section of the first DC to DC converter is coupled in series with the first power generation unit. The first DC to DC converter is configured to process a first portion of the DC power output by the first power generation unit and to provide an unprocessed second portion of the DC power output of the first power generation unit to the output section.

  15. Speed Control of DC Motor using AC/AC/DC Converter Based on Intelligent Techniques

    Directory of Open Access Journals (Sweden)

    Rakan Kh Antar

    2013-05-01

    Full Text Available    This paper describes the application of ac/ac/dc and ac/dc converters to control the speed of a separately excited DC motor. Artificial neural network and PI controller are trained to select the desired values of firing angles for triggering thyristors of the ac/ac/dc and ac/dc bridge converters in order to control the speed of the dc motor at a desired value with constant and different load torques in order to obtain the best speed response. Simulation results show that the rising time for ac/dc and ac/ac/dc converters at 250rpm are reduced about 79% and 89% respectively, while delay time it reduced about 69% and 64% respectively. Therefore, speed response of the dc motor is more efficient for closed loop system compared with open loop also the response of ac/ac/dc converter is better than ac/dc converter.

  16. Dilation and Curettage (D&C)

    Science.gov (United States)

    ... For Patients About ACOG Dilation and Curettage (D&C) Home For Patients Search FAQs Dilation and Curettage ( ... February 2016 PDF Format Dilation and Curettage (D&C) Special Procedures What is dilation and curettage (D& ...

  17. Dilation and Curettage (D&C)

    Science.gov (United States)

    ... For Patients About ACOG Dilation and Curettage (D&C) Home For Patients Search FAQs Dilation and Curettage ( ... February 2016 PDF Format Dilation and Curettage (D&C) Special Procedures What is dilation and curettage (D& ...

  18. Optimization of DC-DC Converters via Geometric Programming

    Directory of Open Access Journals (Sweden)

    U. Ribes-Mallada

    2011-01-01

    Full Text Available The paper presents a new methodology for optimizing the design of DC-DC converters. The magnitudes that we take into account are efficiency, ripples, bandwidth, and RHP zero placement. We apply a geometric programming approach, because the variables are positives and the constraints can be expressed in a posynomial form. This approach has all the advantages of convex optimization. We apply the proposed methodology to a boost converter. The paper also describes the optimum designs of a buck converter and a synchronous buck converter, and the method can be easily extended to other converters. The last example allows us to compare the efficiency and bandwidth between these optimal-designed topologies.

  19. RESONANT STEP-DOWN DC-DC POWER CONVERTERS

    DEFF Research Database (Denmark)

    2015-01-01

    charged from the input voltage and discharged to the output capacitor through the galvanic isolation barrier by a semiconductor switch arrangement in accordance with a switch control signal to produce the converter output voltage. The resonant step-down DC-DC power converter comprises an electrical short...... of the primary side circuit thereby establishing in both the first and second cases a series coupling of the output capacitor and the input capacitor. A load connection is established, in the first case, between the first positive electrode of the output capacitor and the positive input terminal or......-circuit connection across the galvanic isolation barrier connecting, in a first case, the second negative electrode of the output capacitor to the positive input terminal of the primary side circuit or, in a second case, connecting the second positive electrode of the output capacitor to the negative input terminal...

  20. DC/DC converter with improved rectification for higher efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Maisel, Peter; Saliternig, Martin [Continental AG, Nuernberg (Germany)

    2010-07-01

    High-power dc-dc converters are an important element of the electrical system of electric vehicles and hybrid electric vehicles. These complex modular components provide the link between the high-voltage level used for the powertrain and the low-voltage bus for the lighting system, engine management and auxiliary needs in the vehicle. The essential requirements for all converters are high efficiency, compact size, lightweight and reliability. A very popular method to increase the efficiency is the synchronous rectification. Parasitic inductances in the commutation circuit and reverse recovery effects can produce a ringing with voltage overshoots at the diodes and the transistors. These spikes can cause higher average power dissipation in the seminconductors and higher EMI (electromagnetic interference).

  1. Study of nonlinear phenomena in switching DC/DC converters

    Science.gov (United States)

    Iu, Herbert Ho-Ching

    This thesis studies some nonlinear phenomena such as bifurcation and chaos in DC/DC switching converters. Five phases of investigations are described. The first phase reviews the existing tools for analyzing nonlinear systems that are helpful to the investigation of nonlinear phenomena in power electronic circuits. Some of these existing tools are employed to study the nonlinear behaviour of power electronic circuits in the subsequent phases. The second phase focuses on the analysis of bifurcation behaviour of parallel-connected DC/DC converters under a master-slave current sharing scheme. An iterative discrete-time map and its Jacobian are established to predict the onset of period-doubling or Neimark-Sacker bifurcation. Both parallel-connected buck converters and boost converters are studied. The third phase studies an autonomous free-running Cuk converter under a hysteretic current-mode control. Hopf bifurcation is observed, for the first time, in this kind of autonomous power electronic circuits. The method of state-space averaging is employed to predict the occurrence of such bifurcation. Extensive simulations and experiments confirm the predicted results. A typical bifurcation sequence from stable fixed points to chaos, via limit cycles and quasiperiodic orbits, is demonstrated. The fourth phase investigates the possibility of synchronization of two chaotic autonomous free-running Cuk converters. With a particular capacitor voltage as driving signal, synchronization is found possible. Averaged state equations and conditional Lyapunov exponents are used to predict the possibility of synchronization while computer simulations and PSPICE simulations provide the verification. The last phase gives suggestions for future research.

  2. A simple DC-DC convertor of high accuracy

    CERN Document Server

    Hausler, M

    1974-01-01

    Origin and dimension of measurement faults are given for the application of a current source driven convertor having parallel ring transformers. Particularly described in this paper is the behaviour of this dc convertor at measurements taken near the zero point and at change of current polarity. The importance of an additional ring transformer in order to improve the ripple of the device is explained; hints to choose the optimal number of turns of the ring transformer are given. (2 refs).

  3. Mesoscopic electronics beyond DC transport

    Science.gov (United States)

    di Carlo, Leonardo

    Since the inception of mesoscopic electronics in the 1980's, direct current (dc) measurements have underpinned experiments in quantum transport. Novel techniques complementing dc transport are becoming paramount to new developments in mesoscopic electronics, particularly as the road is paved toward quantum information processing. This thesis describes seven experiments on GaAs/AlGaAs and graphene nanostructures unified by experimental techniques going beyond traditional dc transport. Firstly, dc current induced by microwave radiation applied to an open chaotic quantum dot is investigated. Asymmetry of mesoscopic fluctuations of induced current in perpendicular magnetic field is established as a tool for separating the quantum photovoltaic effect from classical rectification. A differential charge sensing technique is next developed using integrated quantum point contacts to resolve the spatial distribution of charge inside a double quantum clot. An accurate method for determining interdot tunnel coupling and electron temperature using charge sensing is demonstrated. A two-channel system for detecting current noise in mesoscopic conductors is developed, enabling four experiments where shot noise probes transmission properties not available in dc transport and Johnson noise serves as an electron thermometer. Suppressed shot noise is observed in quantum point contacts at zero parallel magnetic field, associated with the 0.7 structure in conductance. This suppression evolves with increasing field into the shot-noise signature of spin-lifted mode degeneracy. Quantitative agreement is found with a phenomenological model for density-dependent mode splitting. Shot noise measurements of multi-lead quantum-dot structures in the Coulomb blockade regime distill the mechanisms by which Coulomb interaction and quantum indistinguishability correlate electron flow. Gate-controlled sign reversal of noise cross correlation in two capacitively-coupled dots is observed, and shown to

  4. Implementation of hierarchical control in DC microgrids

    DEFF Research Database (Denmark)

    Jin, Chi; Wang, Peng; Xiao, Jianfang

    2014-01-01

    DC microgrids are becoming popular in low-voltage distribution systems due to the better compatibility with photovoltaic panels, electric vehicles, and dc loads. This paper presents a practical dc microgrid developed in the Water and Energy Research Laboratory (WERL) in the Nanyang University...

  5. Hierarchical Power Sharing Control in DC Microgrids

    DEFF Research Database (Denmark)

    Peyghami Akhuleh, Saeed; Mokhtari, Hossein; Blaabjerg, Frede

    2016-01-01

    Because of the advances in power electronics, DC-based power systems, have been used in industrial applications such as data centers [18], space applications [10], aircraft [12], offshore wind farms, electric vehicles [56], DC home systems [5, 20], and high-voltage DC transmission systems...

  6. DC-DC conversion powering for the CMS tracker at SLHC

    Energy Technology Data Exchange (ETDEWEB)

    Feld, L., E-mail: Lutz.Feld@cern.c [RWTH Aachen University, Sommerfeldstrasse 14, D-52074 Aachen (Germany); Jussen, R.; Karpinski, W.; Klein, K.; Merz, J.; Sammet, J. [RWTH Aachen University, Sommerfeldstrasse 14, D-52074 Aachen (Germany)

    2011-02-01

    A tracker powering scheme based on DC-DC converters close to the detector modules can supply more power through thinner cables. This will allow to satisfy the increased power demands of tracking systems at the SLHC. This article describes the development of DC-DC converters for upgrades of the CMS pixel and tracking systems and addresses system integration issues.

  7. DC-DC Conversion Powering for the CMS Tracker at SLHC

    CERN Document Server

    Feld, Lutz

    2010-01-01

    A tracker powering scheme based on DC-DC converters close to the detector modules can supply more power through thinner cables. This will allow to satisfy the increased power demands of tracking systems at the SLHC. This article describes the development of DC-DC converters for upgrades of the CMS pixel and tracking systems and addresses system integration issues.

  8. Full wave dc-to-dc converter using energy storage transformers

    Science.gov (United States)

    Moore, E. T.; Wilson, T. G.

    1969-01-01

    Full wave dc-to-dc converter, for an ion thrustor, uses energy storage transformers to provide a method of dc-to-dc conversion and regulation. The converter has a high degree of physical simplicity, is lightweight and has high efficiency.

  9. A DC-DC Conversion Powering Scheme for the CMS Phase-1 Pixel Upgrade

    CERN Document Server

    Feld, Lutz Werner; Marcel Friedrichs; Richard Hensch; Karpinski, Waclaw; Klein, Katja; Sammet, Jan Domenik; Wlochal, Michael

    2012-01-01

    The powering scheme of the CMS pixel detector will be described, and the performance of prototype DC-DC buck converters will be presented, including power efficiency, system tests with DC-DC converters and pixel modules, thermal management, reliability at low temperature, and studies of potential frequency locking betwe...

  10. The DC-DC Conversion Power System of the CMS Phase-1 Pixel Upgrade

    CERN Document Server

    Klein, Katja

    2014-01-01

    The power system of the Phase-1 pixel detector will be described and the performance of the new components, including DC-DC converters, DC-DC converter motherboards and various power distribution boards, will be detailed. The outcome of system tests in terms of electrical behaviour, thermal management and pixel module performance will be discussed.

  11. A Survey on Voltage Boosting Techniques for Step-Up DC-DC Converters

    DEFF Research Database (Denmark)

    Forouzesh, Mojtaba; Siwakoti, Yam Prasad; Gorji, Saman Asghari;

    2016-01-01

    Step-up dc-dc converters are used to boost the voltage level of the input to a higher output level. Despite of its features such as simplicity of implementation, the fundamental boost dc-dc converter has shortcomings such as low boost ability and low power density. With these limitations, researc...

  12. AC-DC PFC Converter Using Combination of Flyback Converter and Full-bridge DC-DC Converter

    Directory of Open Access Journals (Sweden)

    Moh. Zaenal Efendi

    2014-06-01

    Full Text Available This paper presents a combination of power factor correction converter using Flyback converter and Full-bridge dc-dc converter in series connection. Flyback converter is operated in discontinuous conduction mode so that it can serve as a power factor correction converter and meanwhile Full-bridge dc-dc converter is used for dc regulator. This converter system is designed to produce a 86 Volt of output voltage and 2 A of output current. Both simulation and experiment results show that the power factor of this converter achieves up to 0.99 and meets harmonic standard of IEC61000-3-2. Keywords: Flyback Converter, Full-bridge DC-DC Converter, Power Factor Correction.

  13. Five-Level Active-Neutral-Point-Clamped DC/DC Converter for Medium-Voltage DC Grids

    DEFF Research Database (Denmark)

    Liu, Dong; Deng, Fujin; Chen, Zhe

    2017-01-01

    effectively eliminate high voltage leaps caused by the dead time effect. In addition, a capacitor voltage control strategy is proposed for the 5L-ANPC dc/dc converter to ensure the balanced flying capacitor voltage and desired five-level voltage waveforms. Finally, simulation and experimental studies......This paper proposes a five-level active-neutralpoint- clamped (5L-ANPC) dc/dc converter for applications in medium voltage dc (MVDC) grids. A modulation strategy is proposed for the 5L-ANPC dc/dc converter to generate multilevel voltage waveforms, which can effectively reduce voltage change rate dv...... are conducted, and the results have verified the proposed converter and control strategies....

  14. A Feed-Forward Control Realizing Fast Response for Three-Branch Interleaved DC-DC Converter in DC Microgrid

    Directory of Open Access Journals (Sweden)

    Haojie Wang

    2016-07-01

    Full Text Available It is a common practice for storage batteries to be connected to DC microgrid buses through DC-DC converters for voltage support on islanded operation mode. A feed-forward control based dual-loop constant voltage PI control for three-branch interleaved DC-DC converters (TIDC is proposed for storage batteries in DC microgrids. The working principle of TIDC is analyzed, and the factors influencing the response rate based on the dual-loop constant voltage control for TIDC are discussed, and then the method of feed-forward control for TIDC is studied to improve the response rate for load changing. A prototype of the TIDC is developed and an experimental platform is built. The experiment results show that DC bus voltage sags or swells caused by load changing can be reduced and the time for voltage recovery can be decreased significantly with the proposed feed-forward control.

  15. Transformerless dc-Isolated Converter

    Science.gov (United States)

    Rippel, Wally E.

    1987-01-01

    Efficient voltage converter employs capacitive instead of transformer coupling to provide dc isolation. Offers buck/boost operation, minimal filtering, and low parts count, with possible application in photovoltaic power inverters, power supplies and battery charges. In photovoltaic inverter circuit with transformerless converter, Q2, Q3, Q4, and Q5 form line-commutated inverter. Switching losses and stresses nil because switching performed when current is zero.

  16. Power Network impedance effects on noise emission of DC-DC converters

    Science.gov (United States)

    Esteban, M. C.; Arteche, F.; Iglesias, M.; Gimeno, A.; Arcega, F. J.; Johnson, M.; Cooper, W. E.

    2012-01-01

    The characterization of electromagnetic noise emissions of DC-DC converters is a critical issue that has been analyzed during the desing phase of CMS tracker upgrade. Previous simulation studies showed important variations in the level of conducted emissions when DC-DC converters are loaded/driven by different impedances and power network topologies. Several tests have been performed on real DC-DC converters to validate the Pspice model and simulation results. This paper presents these test results. Conducted noise emissions at the input and at the output terminals of DC-DC converters has been measured for different types of power and FEE impedances. Special attention has been paid to influence on the common-mode emissions by the carbon fiber material used to build the mechanical structure of the central detector. These study results show important recommendations and criteria to be applied in order to decrease the system noise level when integrating the DC-DC.

  17. FLYWHEEL AND A DC MACHINE

    Directory of Open Access Journals (Sweden)

    IVAN ALCALÁ

    2014-01-01

    Full Text Available Este artículo describe el análisis, modelado y simulación de un vehículo eléctrico (EV enfocado al desarrollo de un banco de pruebas para reproducir la dinámica del EV. El banco está formado por un drive de motor de inducción (IM acoplado directamente a una máquina de DC y a un volante de inercia a través de una transmisión. El volante de inercia y la máquina de DC reproducen la dinámica y las fuerzas que actúan en el vehículo. Se propone una metodología para diseñar un banco de pruebas de EV para estudiar el comportamiento de vehículos eléctricos cercano a las condiciones de operación reales. El análisis de las fuerzas en el EV en conjunto con la máquina DC define las condiciones de operación del EV. El modelado y la simulación son desarrollados en MATLAB/Simulink, el banco de pruebas implementado es controlado por un DSP. Finalmente, los resultados de simulación y experimentales obtenidos validan el funcionamiento del banco de prueba.

  18. 76 FR 13543 - Airworthiness Directives; The Boeing Company Model DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD...

    Science.gov (United States)

    2011-03-14

    ... Model DC-9-81 (MD- 81), DC-9-82 (MD-82), DC-9-83 (MD-83), DC-9-87 (MD-87), and MD-88 Airplanes AGENCY... Floor, Room W12-140, 1200 New Jersey Avenue, SE., Washington, DC 20590. Hand Delivery: Deliver to Mail... stabilizer is similar in design and loading to that of the Model DC-9-81 (MD-81), DC- 9-82 (MD-82),...

  19. DC

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    金属材质机身拥有三层镀膜工艺,1210万像素CCD,采用4倍变焦28mm广角镜头。配合16:9屏幕以及720p高清短片拍摄为卖点.整体感觉有别于佳能一贯的风格。

  20. DC

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    近期.单反市场最受期待的产品非尼康D40x莫属了,D40x的上市弥补了尼康在低价位千万像素级别无产品的空白,形成了其完整的产品线,D200、D80,D40x和D40.随着D70s的停产,D40x充当这一价位的角色,直接挑战佳能400D及索尼a100.目前千万像素已经普及到了低档单反之中,不难看出尼康D40x是2007年单反市场中的一颗重磅炸弹,相信随着D40x的上市单反的价格战又会再次拉开。

  1. DC

    Institute of Scientific and Technical Information of China (English)

    姚文秋

    2005-01-01

    阳春三月,细雨绵绵,冷却了火爆的年前DC市场,但是也活跃离一部分即将崭露头角的新芽。纵观市场,几大品牌中要数尼康的销售情况最好,这主要是尼康的机器价位合理,外形时尚,功能全面,品质优良。比如尼康5200,这款机器500万像素,才两多块,而且外观十分小巧,性价比很高。

  2. DC

    Institute of Scientific and Technical Information of China (English)

    姚文秋

    2005-01-01

    八月,驴友们的黄金时节。九寨沟清凉的水、张家界翠绿的树、黄山神秘的云雾……都是大家向往的好去处。拿起自己心爱的DC把这些美景定格保留作为美好的纪念是必不可少啦。而厂商们当然不会放过暑期这最后的机会,力求分得暑期市场的最后一块蛋糕。总而言之,与硝烟弥漫的七月市场相比,本月DC市场仍然延续着上月的强劲势头。

  3. DC

    Institute of Scientific and Technical Information of China (English)

    姚文秋

    2005-01-01

    纵观年底DC市场,风云变幻,惊喜不断。各大DC厂商纷纷对自己的产品价格进行调整。降价似乎成了最主流的声音。市场霸主佳能继PowerShot S50在市场上大获成功之后,在今年夏天紧接着发布了其第一款5百万像素的相机PowerShot S60,近这款数码相机做了一次大的价格调整。另外,随着家庭用户要求的不断增加,更高水平的家用数码相机也浮出水面。

  4. DC

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    一般来说数码相机镜头等效焦距在200mm以上的机型,就可以称之为长焦相机。长焦数码相机因其超长的焦距、丰富的功能受到了消费者的喜爱,它们也一直是消费级数码相机市场的热点所在。但是由于过大的体积,让携带长焦相机成为一件很费力的事情。现在,随着机身设计的进一步轻便和防抖技术的进一步成熟,长焦相机正在逐渐变得更加小巧、实用。原来拥有超长焦距的机型现在也可以像卡片机一样随身携带,近期上市的索尼DSC—H3就是其中不错的一款。

  5. DC

    Institute of Scientific and Technical Information of China (English)

    姚文秋

    2005-01-01

    DC市场在经过10月份的促销鏖战之后,行情慢慢稳定下来,各个厂家也不断推出自己在2005下半年的主流DC。家用机和长焦数码已经进入了一个新格局。以前我们耳熟能详的佳能A95、尼康5900等一批经典机型已经慢慢退下一线,取而代之的最新产品昂首进入激烈的数码相机战场。而时尚轻薄是在这些新品中刮起来的一阵旋风。

  6. DC

    Institute of Scientific and Technical Information of China (English)

    姚文秋

    2005-01-01

    进入七月,学校都已放假,不少学生教师也将外出旅游当作假期第一选择。要外出旅游当然少不了带上心爱的DC啦。有需求就会有供给,这是市场规律的铁定原则,因此各大厂商自然不会错过机会一一推新的推新、降价的降价。整个市场一片热火朝天的场面。

  7. DC

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    本月市场动态:第十届中国国际照相机械影像器材与技术博览会(2007 CHINA P&E)于7月1日在北京落幕,作为目前中国规模最大的摄影器材展会,其影响力不言而喻。国际知名的几大品牌,如佳能.尼康,索尼均带来了主流的产品,腾龙、适马也推出了各自最新的镜头。从展出的产品来看.有一个非常明显的信号就是,

  8. The potential for water hyacinth to improve the quality of Bogota River water in the Muña Reservoir: comparison with the performance of waste stabilization ponds.

    Science.gov (United States)

    Giraldo, E; Garzón, A

    2002-01-01

    The potential application of Water Hyacinth (Eichhornia crassipes) in organic matter degradation, sedimentation, nutrient and heavy metal absorption and sulfur reduction in the Muña Reservoir has been tested in experimental lagoons. The lagoons were operated at hydraulic retention times (HRT) of 6, 9 and 15 days. One lagoon was covered with Water Hyacinth, which is naturally growing in the Muña Reservoir, while another lagoon was operated as a conventional oxidation pond. The Water Hyacinth lagoon had better removal efficiencies for almost all parameters measured: BOD5, total suspended solids, COD, nitrogen, phosphorus and heavy metals. The oxidation lagoon was facultative for HRT of 9 and 15 days, and anoxic when operated at 6 days HRT. At HRT of 15 days the water quality in the effluent of the covered lagoon corresponded to 12 mg/l of BOD, 6 mg/l of suspended solids and 0.8 mg/l of hydrogen sulfide. Hydrogen sulfide levels in the Muña reservoir can be substantially reduced at HRT higher than 15 days in both lagoons. The uncovered lagoon had better hydrogen sulfide removal during the day but presents high levels at night. If the hydraulic retention time in the Muña reservoir is increased, the water quality of the Bogota river can be substantially improved for all the HRTs tested in the pilot units. HRT seems to give a better prediction of overall effluent water quality than surface loading. More research is needed in order to define the optimum water hyacinth density in the Muña reservoir to determine its influence on the water quality of the effluent. The influence is expected to be negative due to an internal increase of BOD, solids, nutrients and metals loads due to plant decay.

  9. SDF-1, DC1/DC2, and Tumor Angiogenesis

    Science.gov (United States)

    2006-04-01

    However, the presence of functional immunogenic (mature) myeloid DCs is rare in human ovarian tumours35, breast tumours40,41, prostate cancer42 and...cyclooxygenase-2 ( COX2 )50–52. COX2 promotes prostaglandin E2 (PGE2) production in the tumour environment. PGE2 in turn suppresses DC differentiation and...Abundance of VEGF, IL-6, M-CSF, TGFβ, IL-10, COX2 , PGE2, gangliosides and other suppressive molecules versus negligible GM-CSF, IL-4, B7-H1 A recently

  10. A Feedback Passivation Design for DC Microgrid and Its DC/DC Converters

    Directory of Open Access Journals (Sweden)

    Feifan Ji

    2016-12-01

    Full Text Available There are difficulties in analyzing the stability of microgrids since they are located on various network structures. However, considering that the network often consists of passive elements, the passivity theory is applied in this paper to solve the above-mentioned problem. It has been formerly shown that when the network is weakly strictly positive real (WSPR, the DC microgrid is stable if all interfaces between the microgrid and converters are made to be passive, which is called interface passivity. Then, the feedback passivation method is proposed for the controller design of various DC–DC converters to achieve the interface passivity. The interface passivity is different from the passivity of closed-loop systems on which the passivity based control (PBC concentrates. The feedback passivation design is detailed for typical buck converters and boost converters in terms of conditions that the controller parameters should satisfy. The theoretical results are verified by a hardware-in-loop real-time labotray (RTLab simulation of a DC microgrid with four generators.

  11. DC Voltage Droop Control Implementation in the AC/DC Power Flow Algorithm: Combinational Approach

    DEFF Research Database (Denmark)

    Akhter, F.; Macpherson, D.E.; Harrison, G.P.

    2015-01-01

    In this paper, a combinational AC/DC power flow approach is proposed for the solution of the combined AC/DC network. The unified power flow approach is extended to include DC voltage droop control. In the VSC based MTDC grids, DC droop control is regarded as more advantageous in terms...... of operational flexibility, as more than one VSC station controls the DC link voltage of the MTDC system. This model enables the study of the effects of DC droop control on the power flows of the combined AC/DC system for steady state studies after VSC station outages or transient conditions without needing...... to use its complete dynamic model. Further, the proposed approach can be extended to include multiple AC and DC grids for combined AC/DC power flow analysis. The algorithm is implemented by modifying the MATPOWER based MATACDC program and the results shows that the algorithm works efficiently....

  12. Energy Factor and Mathematical Modeling for Power DC/DC Converters

    Institute of Scientific and Technical Information of China (English)

    Fang Lin LUO; Hong YE

    2004-01-01

    Mathematical modelling for power DC/DC converters is a historical problem accompanying DC/DC conversion technology since 1940's. The traditional mathematical modelling is not available for complex structure converters since the differential equation order increases very high. We have to search other way to establish mathematical modelling for power DC/DC converters. We have theoretically defined a new concept - Energy Factor (EF) in this paper and researched the relations between EF and the mathematical modelling for power DC/DC converters. EF is a new concept in power DC/DC conversion technology, which thoroughly differs from the traditional concepts such as power factor (PF), power transfer efficiency (η), total harmonic distortion (THD) and ripple factor (RF). EF and the subsequential EFv (and EFvD ) can illustrate the system stability, reference response and interference recovery. This investigation is very helpful for system design and DC/DC converters characteristics foreseeing. Two DC/DC converters: Buck converter and Super-Lift Luo-Converter as the samples are analysed in this paper to demonstrate the applications of EF, EFv (and EFvD), PE,SE, VE (and VED ), time constant τ and damping time constant τd .

  13. Silicon carbide DC-DC multilevel Cuk converter

    Science.gov (United States)

    Almalaq, Yasser; Alateeq, Ayoob; Matin, Mohammad

    2016-09-01

    In this paper, DC-DC multilevel cuk converter using silicon carbide (SiC) Components is presented. Cuk converter gives output voltage with negative polarity. This topology is useful for applications require high gain with limitation on duty cycle. The gain of the design can be enhanced by increasing the number of multiplier level (N). This relation between the gain and the number of levels is the major advantage of this multilevel cuk converter. In the proposed cuk converter, a single SiC MOSFET, 2N-1 SiC schottky diodes, 2N capacitors, 2 inductors, and single input voltage are used to supply a load with negative polarity. 300V input voltage, 50KHz switching frequency, and 75% duty cycle are the main parameters used in the design. The output parameters are 3KW power and -5.7 KV voltage. Because this design can be used in applications which temperature plays a critical role, the relation between increasing temperature and output voltage and power are tested. The design is simulated using LTspice software and the results are discussed.

  14. DC Magnetics Measurement System Design

    Science.gov (United States)

    Mastny, Timothy

    2012-01-01

    This report will detail the updates to the magnetics measurement system design and testing procedures that are required for performing static (DC) magnetics testing of future flight hardware. An older magnetics testing system had to be integrated with new procedures and hardware to meet the demands of future testing programs and accommodate an upcoming magnetics tests. The next test will be for the Geostationary Operational Environmental Satellite R-Series (GOES-R), which will verify that the SAFT Battery component meets its specifications for magnetic cleanliness. The satellite is scheduled to launch in 2015 with magnetics testing to be completed on the battery in November 2012.

  15. Linking DC together with TRSL

    DEFF Research Database (Denmark)

    Haxthausen, Anne; Yong, Xia

    1999-01-01

    of constraints on the durations of states of the system, i.e. at a high level of abstraction.However, as a state-based logic, it lacks the ability to specifysequential programs and communicating concurrent processes at a concrete level. The Timed RAISE Specification Language (TRSL) [XG99] has this ability...... (parts of) the history of the observables of the system,and then define a satisfaction relation in terms of behaviours. DC has previously been linked together with subsets of other event-based process algebra languages, but using another approach:the event-based languages were given a denotational...

  16. Power factor controller used as DC-DC converter for photovoltaic sources

    Energy Technology Data Exchange (ETDEWEB)

    Mukerjee, A.K.; Dasgupta, Nivedita [Centre for Energy Studies, Indian Institute of Technology Delhi, Hauz Khas, New Delhi 110016 (India)

    2008-06-15

    An active power factor controller (PFC) integrated circuit, normally used in AC circuits, has been used for DC-to-DC boost conversion with a stable output voltage for a variable DC input voltage as obtained from photovoltaic (PV) sources. The circuit described here uses a power factor controller MC 34262 to give approximately 400 V{sub DC} output for an input variation from 90 to 280 V{sub DC}. The maximum efficiency achieved was 98% at 450 W. Comparisons between AC and DC operations have been made. (author)

  17. Chaos analysis and chaotic EMI suppression of DC-DC converters

    CERN Document Server

    Zhang, Bo

    2014-01-01

    Introduces chaos theory, its analytical methods and the means to apply chaos to the switching power supply design DC-DC converters are typical switching systems which have plenty of nonlinear behaviors, such as bifurcation and chaos. The nonlinear behaviors of DC-DC converters have been studied heavily over the past 20 years, yet researchers are still unsure of the practical application of bifurcations and chaos in switching converters. The electromagnetic interference (EMI), which resulted from the high rates of changes of voltage and current, has become a major design criterion in DC-DC co

  18. Elimination of output voltage oscillations in DC-DC converter using PWM with PI controller

    Directory of Open Access Journals (Sweden)

    Sreenivasappa Veeranna Bhupasandra

    2010-01-01

    Full Text Available In this paper the SIMULINK model of a PWM controlled DC-DC converter is modeled using switching function concept to control the speed of the DC motor. The presence of the voltage oscillation cycles due to higher switching frequency in the DC-DC converter is identified. The effect of these oscillations on the output voltage of the converter, Armature current, Developed torque and Speed of the DC motor is analyzed. In order to minimize the oscillation cycles the PI controller is proposed in the PWM controller.

  19. Hierarchical Velocity Control Based on Differential Flatness for a DC/DC Buck Converter-DC Motor System

    Directory of Open Access Journals (Sweden)

    R. Silva-Ortigoza

    2014-01-01

    Full Text Available This paper presents a hierarchical controller that carries out the angular velocity trajectory tracking task for a DC motor driven by a DC/DC Buck converter. The high level control is related to the DC motor and the low level control is dedicated to the DC/DC Buck converter; both controls are designed via differential flatness. The high level control provides a desired voltage profile for the DC motor to achieve the tracking of a desired angular velocity trajectory. Then, a low level control is designed to ensure that the output voltage of the DC/DC Buck converter tracks the voltage profile imposed by the high level control. In order to experimentally verify the hierarchical controller performance, a DS1104 electronic board from dSPACE and Matlab-Simulink are used. The switched implementation of the hierarchical average controller is accomplished by means of pulse width modulation. Experimental results of the hierarchical controller for the velocity trajectory tracking task show good performance and robustness against the uncertainties associated with different system parameters.

  20. Prevalencia de tuberculosis latente en pacientes con diabetes mellitus en una institución hospitalaria (Fundacion Hospital San Carlos Bogota DC) en los servicios de consulta externa y hospitalizació

    OpenAIRE

    Mendez Florez, Jainer José

    2015-01-01

    Según los datos existentes en la literatura, los pacientes con diabetes mellitus constituyen un grupo con mayores tasas de tuberculosis (respecto la población general) incluyendo el estado latente. Existe evidencia epidemiológica suficiente que ilustra preocupación en el mundo sobre el aumento visto y esperado en los próximos años en la carga de morbilidad por diabetes mellitus, cuyo impacto en el comportamiento epidemiológico de la tuberculosis conlleva mayor incidencia de casos, así como pe...

  1. Effects of an Educational Intervention on Breast Self-Examination, Breast Cancer Prevention-Related Knowledge, and Healthy Lifestyles in Scholars from a Low-Income Area in Bogota, Colombia.

    Science.gov (United States)

    Masso-Calderón, A M; Meneses-Echávez, J F; Correa-Bautista, J E; Tovar-Cifuentes, A; Alba-Ramírez, P A; Charry-Ángel, C E

    2016-11-04

    The aim of this study was to evaluate the effects of an educational intervention on breast self-examination, cancer prevention-related knowledge, practices, and behavior change in scholars from a low-income area in Bogota, Colombia. Uncontrolled trial was conducted in 155 scholars. Two educational sessions, 90 min each, were carried out in March 2015 according to the Colombian guidelines for educational communication in the framework of cancer control. All participants completed a self-reported questionnaire at pre- and post-intervention, as well as 1, 3, and 6 months after the intervention. Breast self-examination was practiced by 78.1% of the scholars, and the overall knowledge of breast cancer risk factors was poor. The educational intervention resulted in significant improvements on breast self-examination practice, the knowledge of the technique, and the knowledge of the main risk factors for breast cancer as well as the practice of physical activity and vegetable intake at 6 months follow-up. An educational intervention according to the Colombian guidelines for educational communication in the framework of cancer control improved the practice of breast self-examination, cancer prevention-related knowledge, as well as the practice of physical activity and vegetable consumption in scholars from a low-income area in Bogota, Colombia. Further randomized controlled studies are warranted.

  2. DC operating points of transistor circuits

    Science.gov (United States)

    Trajkovic, Ljiljana

    Finding a circuit's dc operating points is an essential step in its design and involves solving systems of nonlinear algebraic equations. Of particular research and practical interests are dc analysis and simulation of electronic circuits consisting of bipolar junction and field-effect transistors (BJTs and FETs), which are building blocks of modern electronic circuits. In this paper, we survey main theoretical results related to dc operating points of transistor circuits and discuss numerical methods for their calculation.

  3. Control of Parallel DC/DC Converters in DC Microgrid%直流微网中平行DC/DC变换器的控制

    Institute of Scientific and Technical Information of China (English)

    叶友泉; 杨冠鲁

    2016-01-01

    提出以多墙体光伏为研究对象的光伏直流微网系统。将在逆变器并联控制中广泛使用的下垂控制策略应用到平行DC/DC变换器的控制中,与电压、电流环构成三闭环控制,从而抑制平行DC/DC变换器之间的环流。通过Simulink 仿真分析,该方法能够实现直流母线电压的稳定及有效抑制各平行DC/DC变换器之间的环流。最后,在实验室搭建实验平台,验证该控制策略的可行性。%This article proposes a photovoltaic ( PV) DC microgrid system which employs multi-wall PV. In the DC microgrid, the droop control strategy widely used in parallel control of inverter is adopted for the control of parallel DC/DC converters, forming a triple-loop control together with voltage and current loops, which restrains the loop current between parallel DC/DC converters. Simulink simulation shows that, stable DC bus voltage and effective control over the loop current among parallel DC / DC converters can be achieved by this way. In the end, an experimental platform is built in the lab to verify the feasibility of this control strategy.

  4. How Much DC Power is Necessary

    Science.gov (United States)

    2010-04-01

    must transform essentially all of the available AC power to DC, including all of the power for the ship propulsion drive. This approach by the...in Fig. 1 convert the AC source power to DC and energize the associated DC busses. At the power levels anticipated, i.e., for ship propulsion load...for a ship propulsion application. We begin by assuming that the variable frequency power electronics associated with the rotor will only deliver

  5. Energy Evaluation for DC/DC Converters in DC-Based Wind Farms

    Energy Technology Data Exchange (ETDEWEB)

    Max, Lena

    2007-02-15

    In this thesis the suitability of three topologies for DC/DC converters in a DC wind farm grid is investigated from an energy efficiency and energy production cost point of view. The three selected topologies are the fullbridge converter, the single active bridge converter and the series parallel resonant converter. The losses are calculated for all three topologies as a function of the wind speed considering the losses in the semiconductor components and in the transformer. To obtain the average losses, the losses for each converter are integrated over the wind distribution for different average wind speeds. It is found that the resonant converter has the lowest losses of the three types for the DC wind farm application with power losses of about 2.0 - 2.5 % of the input power and the fullbridge converter has slightly higher losses with 2.3 - 3.5 % losses depending on the position in the wind turbine grid. The single active bridge converter has considerably higher losses than the other two topologies with 3.5 - 5.0 % losses. It is shown that the variable operating conditions create problems for all three converters, and as mentioned the single active bridge converter is most affected by the wide range of operation conditions. When comparing the resonant converter and the fullbridge converter, the fullbridge converter has a smaller transformer as well as lower peak current and peak voltage, but also a higher number of diode modules in the output bridge. Comparing the contribution to the energy production cost for the converters, the topology with the lowest contribution varies between the positions in the wind turbine grid. For some positions, the cost of the higher losses for the fullbridge converter are compensated by lower investment cost for the fullbridge converter compared to the resonant converter. Considering the resonant capacitor, the higher peak voltage and the variable frequency control for the resonant converter, the fullbridge converter is here found

  6. Zero-voltage switching technique in dc/dc converters

    Science.gov (United States)

    Liu, Kwang-Hwa; Lee, Fred C. Y.

    1990-07-01

    A novel resonant switch operating under the principle of zero-voltage switching is presented. In contrast to the zero-current switching, this technique eliminates the switching loss and dv/dt noise due to the discharging of MOSFET junction capacitances and the reverse recovery of diodes, and enables the converters to operate at high frequencies. A dc analysis of the converter is carried out. The duality relationship between the zero-current switching technique and the zero-voltage switching technique is derived. The two techniques are compared using an example showing the duality between a current-mode quasi-resonant Buck converter and a voltage-mode quasi-resonant boost converter. A 5-MHz 50 V to 5 V flyback converter employing the zero-voltage switching technique has been implemented. The circuit contains the smallest number of components possible, and yet maintains high efficiency at high switching frequency.

  7. SIMPLIFIED APPROACHES FOR CONTROLLING DC-DC POWER CONVERTERS

    Directory of Open Access Journals (Sweden)

    M. M. ABDEL AZIZ

    2012-02-01

    Full Text Available This paper represents the design procedures of different compensation schemes for voltage mode controlled (VMC dc–dc switching converters. Proportional integral derivative (PID controllers, Fuzzy logic controllers (FLC, parallel combination of PID and FLC, and FLC tuned by PI controller have been investigated. MATLAB software is used to depict the buck converter performance with each compensator type when it is electrically simulated, and analytically modeled using its equivalent transfer function (TF. The comparative study Resultsemphasize that FLC tuned by PI controller is superior to the other control strategies because of fast transient response, minimum steady state error and good disturbance rejection under various variations of the operating conditions. Hence, it achieves the most tightly output voltage regulation.

  8. Teaching about operation of brushless DC motors

    OpenAIRE

    Čufar, Aleksandra

    2013-01-01

    Brush DC motor is being replaced by brushless DC motors on every area of application. My diploma thesis is a presentation of brushless DC motor, how it works and its application. Within first part we describe various electric motors and their application. There are several types of electric motors division. Last to be added is a brushless motor. Within second part of thesis we look into a brushless DC motor, how it works, its application and control. In the third part of thesis we construct a...

  9. The good routing of a non-insulated DC/DC converter; Bien router un convertisseur DC/DC non-isole

    Energy Technology Data Exchange (ETDEWEB)

    Lenoir, E.

    2001-03-01

    DC to DC converters are important sources of magnetic and electric fields with frequencies that can exceed 100 MHz. Thus, their positioning on a circuit board is of prime importance to minimize the magnetic and capacitive couplings with other parts and components of the circuit. This article summarizes the important rules to follow for a good routing of non-insulated switching DC/DC converters: taking the ohmic voltage drops into consideration, managing the MOSFET commutation, limiting the current loop disturbances, correct routing of power tracks. (J.S.)

  10. Drilling history core hole DC-8

    Energy Technology Data Exchange (ETDEWEB)

    1978-10-01

    Core hole DC-8 was completed in August, 1978 by Boyles Brothers Drilling Company, Spokane, Washington, under subcontract to Fenix and Scission, Inc. The hole was cored for the US Department of Energy and the Rockwell Hanford Operations' Basalt Waste Isolation Program. Fenix and Scisson, Inc. furnished the engineering, daily supervision of the core drilling activities, and geologic core logging for hole DC-8. Core hole DC-8 is located on the Hanford Site near the Wye Barricade and 50 feet northwest of rotary hole DC-7. The Hanford Site vation coordinates for DC-8 are North 14,955.94 feet and West 14,861.92 coordinates for DC-8 are North 14,955.94 feet and West 14,861.92 mean sea level. The purpose of core hole DC-8 was to core drill vertically through the basalt and interbed units for stratigraphic depth determination and core collection, and to provide a borehole for hydrologic testing and cross-hole seismic shear and pressure wave velocity studies with rotary hole DC-7. The total depth of core hole DC-8 was 4100.5 feet. Core recovery exceeded 97 percent of the total footage cored.

  11. DC-SIGN:Binding receptor for HCV?

    Institute of Scientific and Technical Information of China (English)

    Zhi-Hua Feng; Quan-Chu Wang; Qing-He Nie; Zhan-Sheng Jia; Yong-Xin Zhou

    2004-01-01

    DC-SIGN, a dendritic Cell-specific adhesion receptor and a type Ⅱ transmembrane mannose-binding C-type lectin, is very important in the function of DC, both in mediating naive T cell interactions through ICAM-3 and as a rolling receptor that mediates the DC-specific ICAM-2-dependent migration processes. It can be used by viral and bacterial pathogens including Human Immunodeficiency Virus (HIV), HCV, Ebola Virus, CMV and Mycobacterium tuberculosis to facilitate infection. Both DC-SIGN and DC-SIGNR can act either in cis,by concentrating virus on target cells, or in trans, by transmission of bound virus to a target cell expressing appropropriate entry receptors. Recent work showed that DC-SIGN are highaffinity binding receptors for HCV. Besides playing a role in entry into DC, HCV E2 interaction with DC-SIGN might also be detrimental for the interaction of DC with T cells during antigen presentation. The clinical strategies that target DCSIGN may be successful in restricting HCV dissemination and pathogenesis as well as directing the migration of DCs to manipulate appropriate immune responses in autoimmunity and tumorigenic situations.

  12. Modular Power System Configured with Standard Product Hybrid DC-DC Converters Project

    Data.gov (United States)

    National Aeronautics and Space Administration — VPT proposes an innovative concept whereby complex NASA space power electronic systems can be configured using a small number of qualified hybrid DC-DC converter and...

  13. Improved Control Strategy for T-type Isolated DC/DC Converters

    DEFF Research Database (Denmark)

    Liu, Dong; Deng, Fujin; Wang, Yanbo

    2017-01-01

    T-type isolated DC/DC converters have recently attracted attention due to their numerous advantages, including few components, low cost, and symmetrical operation of transformers. This study proposes an improved control strategy for increasing the efficiency of T-type isolated DC/DC converters....... Under the proposed strategy, the primary circulating current flows through the auxiliary switches (metal–oxide–semiconductor field-effect transistors) instead of their body diodes in free-wheeling periods. Such feature can reduce conduction losses, thereby improving the efficiency of T-type isolated DC....../DC converters. The operation principles and performances of T-type isolated DC/DC converters under the proposed control strategy are analyzed in detail and verified through the simulation and experimental results....

  14. Development of a DC-DC conversion powering scheme for the CMS Phase-1 pixel upgrade

    Science.gov (United States)

    Feld, L.; Fimmers, C.; Karpinski, W.; Klein, K.; Lipinski, M.; Preuten, M.; Rauch, M.; Rittich, D.; Sammet, J.; Wlochal, M.

    2014-01-01

    A novel powering scheme based on the DC-DC conversion technique will be exploited to power the CMS Phase-1 pixel detector. DC-DC buck converters for the CMS pixel project have been developed, based on the AMIS5 ASIC designed by CERN. The powering system of the Phase-1 pixel detector is described and the performance of the converter prototypes is detailed, including power efficiency, stability of the output voltage, shielding, and thermal management. Results from a test of the magnetic field tolerance of the DC-DC converters are reported. System tests with pixel modules using many components of the future pixel barrel system are summarized. Finally first impressions from a pre-series of 200 DC-DC converters are presented.

  15. Wide Temperature Range DC-DC Boost Converters for Command/Control/Drive Electronics Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We shall develop wide temperature range DC-DC boost converters that can be fabricated using commercial CMOS foundries. The boost converters will increase the low...

  16. Digitally intensive DC-DC converter for extreme space environments Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Space Micro –Arizona State University (ASU) team will develop an all-digitally controlled, wide temperature range point-of-load switch-mode DC-DC regulator...

  17. DIAGNOSTIC/PROGNOSTIC EXPERIMENTS FOR CAPACITOR DEGRADATION AND HEALTH MONITORING IN DC-DC CONVERTERS

    Data.gov (United States)

    National Aeronautics and Space Administration — Studying and analyzing the ageing mechanisms of electronic components avionics in systems such as the GPS and INAV are of critical importance. In DC-DC power...

  18. Decentralized Nonlinear Controller Based SiC Parallel DC-DC Converter Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This proposal is aimed at demonstrating the feasibility of a Decentralized Control based SiC Parallel DC-DC Converter Unit (DDCU) with targeted application for...

  19. Development of a DC-DC conversion powering scheme for the CMS Phase-1 pixel upgrade

    CERN Document Server

    Feld, Lutz Werner; Karpinski, Waclaw; Klein, Katja; Lipinski, Martin; Preuten, Marius; Max Rauch; Rittich, David Michael; Sammet, Jan Domenik; Wlochal, Michael

    2014-01-01

    A novel powering scheme based on the DC-DC conversion technique will be exploited to power the CMS Phase-1 pixel detector. DC-DC buck converters for the CMS pixel project have been developed, based on the AMIS5 ASIC designed by CERN. The powering system of the Phase-1 pixel detector is described and the performance of the converter prototypes is detailed, including power efficiency, stability of the output voltage, shielding, and thermal management. Results from a test of the magnetic field tolerance of the DC-DC converters are reported. System tests with pixel modules using many components of the future pixel barrel system are summarized. Finally first impressions from a pre-series of 200 DC-DC converters are presented.

  20. Hybrid-Circuit Module For Dc-To-Dc Power Converter

    Science.gov (United States)

    Vorperian, Vatche; Detwiler, Robert; Karmon, Dan

    1996-01-01

    Power hybrid module is general-purpose power-switching module providing flexibility in design and application. Complete dc-to-dc power converter constructed by adding input/output filters and feedback circuitry to module to suit specific application.

  1. High Efficiency Interleaved Active Clamped Dc-Dc Converter with Fuel Cell for High Voltage Applications

    Directory of Open Access Journals (Sweden)

    Sona P

    2014-02-01

    Full Text Available A high efficiency interleaved ZVS active clamped current fed dc-dc converter is proposed in this paper specially used for fuel cell applications. As the fuel cell output is very low we are in need of a step up dc-dc converter. Here a current fed dc-dc converter is used. Two current fed dc-dc converters are interleaved by connecting their inputs in parallel and outputs in series. With this proposed methodology input current ripples in the fuel cell stacks can be reduced and a regulated output voltage ripples can be obtained. The active clamping circuit used in this model absorbs the turn off voltage spikes hence low voltage devices with low on state resistance can be used.Voltage doubler circuits will give double the output voltage than normal with smaller transformer turns ratio and flexibility. The proposed method is simulated in MATLAB for verifying the accuracy of the proposed design.

  2. Effect of Antioxidants on DC Tree and Grounded DC Tree in XLPE

    Science.gov (United States)

    Kawanami, Hiroshi; Komatsu, Isao; Sekii, Yasuo; Saito, Mitsugu; Sugi, Kazuyuki

    To study the effects of antioxidants on the initiation of the DC tree and the grounded DC tree, experiments were conducted using XLPE specimens containing phenolic and sulfur type antioxidants. Experimental results showed that sulfur type antioxidants in XLPE have the effect of increasing inception voltages of both the DC tree and the grounded DC tree. Based on results of those experiments, the mechanism of increase in the inception voltage of the DC tree and the grounded DC tree by antioxidants was examined along with the mechanism of polarity effects on those trees. Results showed a promotional effect of charge injection from a needle electrode by antioxidants, which are responsible for the increased inception voltages of the DC tree. Charge trapping by antioxidants explains the increase of inception voltages of the grounded DC tree.

  3. Digitally intensive DC-DC converter for extreme space environments Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Space Micro-Arizona State University (ASU) team will develop an all-digitally controlled, wide temperature range point-of-load switch-mode DC-DC regulator core...

  4. 76 FR 52225 - Airworthiness Directives; The Boeing Company Model DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD...

    Science.gov (United States)

    2011-08-22

    ... Model DC-9-81 (MD- 81), DC-9-82 (MD-82), DC-9-83 (MD-83), DC-9-87 (MD-87), and MD-88 Airplanes AGENCY... Ground Floor, Room W12-140, 1200 New Jersey Avenue, SE., Washington, DC 20590. FOR FURTHER INFORMATION... ADs (b) None. Applicability (c) This AD applies to The Boeing Company Model DC-9-81 (MD-81),...

  5. Studies of Interleaved DC-DC Boost Converters with Coupled Inductors

    Science.gov (United States)

    2011-04-01

    power density requirements, interleaved buck and boost converters have been studied in recent years for their potential to improve power converter ...duty ratio of switch S1. Figure 1: Conventional DC-DC Boost Converter Topology (1) Vout/Vin...interleaved DC-DC boost converters with coupled inductors. Included are discussions on a 10kW prototype, a 2kW high temperature prototype, and two 2kW

  6. A Family of Four Quadrant DC/DC Converters with Reduced Number of Components

    DEFF Research Database (Denmark)

    Mostaan, Ali; Soltani, Mohsen

    2015-01-01

    A family of four quadrant DC/DC converters is presented in this paper. Compare with existing four quadrant DC/DC converters that have been introduced in literature, the proposed converters have lower number of components. There are two bidirectional switches, two coupled inductors and one capacit...... effect is minimized in these converters. The effectiveness of the proposed converters is validated with simulation using MATLAB/SIMULINK....

  7. A Fixed-Frequency Bidirectional Resonant DC-DC Converter Suitable for Wide Voltage Gain Range

    DEFF Research Database (Denmark)

    Shen, Yanfeng; Wang, Huai; Al-Durra, Ahmed;

    2017-01-01

    This paper proposes a new bidirectional resonant dc-dc converter suitable for wide voltage gain range applications (e.g., energy storage systems). The proposed converter overcomes the narrow voltage gain range of conventional resonant DC-DC converters, and meanwhile achieves high efficiency...... and characteristics of the proposed converter are analyzed. Finally, a 1-kW converter prototype is built and the experimental results verify the theoretical analyses....

  8. 多路输出DC-DC电路设计%Design of multiple-output DC-DC circuit

    Institute of Scientific and Technical Information of China (English)

    郑晓庆; 杨日杰; 杨立永; 赵轩坤

    2012-01-01

    In order to convert a single input voltage to multiple outputs,a multiple-output DC-DC conversion circuit based LTC1624 and AMS1117 was designed in this paper. The circuit can convert the input voltage of 12V offered by a lead-acid battery to 5 V,3. 3 V and 1. 8 V as the output,and as tested,the output voltage of the DC-DC circuit designed in this paper is stable and reliable. Supplying power to different modules of a temperature measurement system, the circuit performance meets system requirements.%为了将单一输入电压变换为多路稳压输出,设计了基于LTC1624和AMS1117的DC-DC变换电路,该电路能够将铅酸蓄电池12V输入电压经过DC-DC变换后得到5V、3.3V和1.8V三路输出电压,经测试,设计的DC-DC电路输出电压稳定可靠.该电路应用于某温度测试系统的不同模块供电,电路性能满足系统要求.

  9. Efficacy and safety of new complementary feeding guidelines with an emphasis on red meat consumption: a randomized trial in Bogota, Colombia.

    Science.gov (United States)

    Olaya, Gilma A; Lawson, Margaret; Fewtrell, Mary S

    2013-10-01

    Iron deficiency and poor linear growth are common in infants from deprived socioeconomic backgrounds and may be associated with inadequate complementary feeding (CF) practices. We tested the hypothesis that new CF guidelines emphasizing meat as a source of iron and zinc would improve linear growth, iron, and zinc status in infants living in poor socioeconomic circumstances in Bogota, Colombia. A total of 85 term infants who were exclusively breastfed for ≥4 mo were randomly assigned at 6 mo of age to a control group [CG (n = 43); current advice] or intervention group (new guidelines group [NGG (n = 42); with counseling to 1) continue breastfeeding, 2) offer red meat ≥3 d/wk, and 3) offer fruit and vegetables daily]). Main outcomes were 1) linear growth from 6 to 12 mo of age; 2) hemoglobin, hematocrit, iron [serum ferritin (SF)], and zinc status at 12 mo of age; and 3) meat intake at 12 mo of age (by using a food-frequency questionnaire). A total of 38 infants/group provided data at 12 mo of age. NGG infants had significantly higher red meat intake [mean ± SD: 5.4 ± 1.8 compared with 3.5 ± 1.7 d/wk at 12 mo of age; P < 0.001), higher hemoglobin and hematocrit at 12 mo of age, and a significantly greater increase in hemoglobin (mean ± SD change: 0.41 ± 0.8 compared with -0.13 ± 1.0; P = 0.01) and hematocrit (1.04 ± 2.2 compared with -0.15 ± 2.4; P = 0.03) from 6 to 12 mo of age than those in CG infants. There were no significant differences in linear growth from 6 to 12 mo of age or in SF or zinc. The new guidelines showed efficacy with higher red meat intake and positive effects on hemoglobin and hematocrit. The intervention was acceptable and affordable for most mothers. These preliminary results suggest that the intervention merits investigation in a larger cohort with longer-term follow-up. This trial was registered at http://isrctn.org as ISRCTN57733004.

  10. Extra-High-Voltage DC-DC Boost Converters Topology with Simple Control Strategy

    Directory of Open Access Journals (Sweden)

    K. Rajambal

    2009-01-01

    Full Text Available This paper presents the topology of operating DC-DC buck converter in boost mode for extra-high-voltage applications. Traditional DC-DC boost converters are used in high-voltage applications, but they are not economical due to the limited output voltage, efficiency and they require two sensors with complex control algorithm. Moreover, due to the effect of parasitic elements the output voltage and power transfer efficiency of DC-DC converters are limited. These limitations are overcome by using the voltage lift technique, opens a good way to improve the performance characteristics of DC-DC converter. The technique is applied to DC-DC converter and a simplified control algorithm in this paper. The performance of the controller is studied for both line and load disturbances. These converters perform positive DC-DC voltage increasing conversion with high power density, high efficiency, low cost in simple structure, small ripples, and wide range of control. Simulation results along theoretical analysis are provided to verify its performance.

  11. Characterization of diode valve in medium voltage dc/dc converter for wind turbines

    DEFF Research Database (Denmark)

    Dincan, Catalin Gabriel; Kjær, Philip Carne

    2016-01-01

    This paper proposes a methodology for characterization of medium voltage (MV), medium frequency (MF) rectifier diode valve. The intended application is for 10MW dc/dc converters used in DC offshore wind turbines. Sensitivity to semiconductor component parameter variation, snubber component...

  12. Analysis of DC/DC Converter Efficiency for Energy Storage System Based on Bidirectional Fuel Cells

    DEFF Research Database (Denmark)

    Pittini, Riccardo; Zhang, Zhe; Andersen, Michael A. E.

    2013-01-01

    Renewable energy sources are fluctuating depending on the availability of the energy source. For this reason, energy storage is becoming more important and bidirectional fuel cells represent an attractive technology. Fuel cells require highcurrent low-voltage dc-dc or dc-ac converters as power...

  13. Startup Capability of Boost DC/DC Converter%Boost DC/DC的低压启动能力

    Institute of Scientific and Technical Information of China (English)

    向乾尹; 冯全源

    2011-01-01

    An analytical model was proposed to calculate the minimum startup voltage of a boost DC/ DC converter under a constant current load. The factors, such as the current load, the parasitic parameters, the saturation current and on-resistance of the power switch, the switching frequency, and the minimum startup voltage, etc. , which affect the startup capability of the boost DC/DC converter were analyzed with a steady-state analysis method. The model was applied to the design of a boost DC/ DC converter with a 0. 6 jxm CMOS process, and the maximum error of the minimum startup voltage calculated by the proposed model was 4. 5% compared with that by the HSPICE simulator.%为了准确预测Boost DC/DC低压启动能力,采用稳态分析方法,分析了电流负载、寄生参数、功率开关饱和电流及导通阻抗、开关频率、启动电路最低工作电压等因素对Boost DC/DC低压启动能力的影响,提出了预测Boost DC/DC恒流负载下最小启动电压的解析模型.将该模型应用于采用0.6 μm CMOS工艺的Boost DC/DC设计中,模型计算结果相对HSPICE仿真结果的最大误差为4.5%.本模型可推广至恒定电阻负载的情况.

  14. DC/DC converters for integration of double-layer condensers in onboard power supply; DC/DC-Wandler zur Einbindung von Doppelschichtkondensatoren in das Fahrzeugenergiebordnetz

    Energy Technology Data Exchange (ETDEWEB)

    Polenov, Dieter

    2010-01-15

    The paper discusses DC/DC converters for integration of double layer condensers into the onboard power system. First, requirements on DC/DC converters are listed and compared on the basis of three exemplary applications. A DC/DC converter concept is developed for decoupling transient high-power loads like electric steering systems. Three different topologies are compared using a specially developed method in order to find the best solution for the given application. In order to establish adequate criteria for selecting the switching frequency and inductivities of storage throttles, the influence of the trottle power change on the switching characteristics of the MOSFETs and on certain ranges of EMP interference emissions is investigated. As methods of optimising the operation of the synchronous rectifiers, parallel connection of Schottky diodes and synchronous rectifiers as well as the variation of the shut-off dead times of synchronous rectifiers were investigated. Further, a concept for converter control was developed in consideration of the intended application and topology. Finally, selected aspects for implementation of the DC/DC converter concept are presented as well as the results of experimental investigations.

  15. DC KIDS COUNT e-Databook Indicators

    Science.gov (United States)

    DC Action for Children, 2012

    2012-01-01

    This report presents indicators that are included in DC Action for Children's 2012 KIDS COUNT e-databook, their definitions and sources and the rationale for their selection. The indicators for DC KIDS COUNT represent a mix of traditional KIDS COUNT indicators of child well-being, such as the number of children living in poverty, and indicators of…

  16. DC-based immunotherapy for hematological malignancies.

    Science.gov (United States)

    Kitawaki, Toshio

    2014-02-01

    Great advances have been made in the treatment of hematological malignancies, but achieving a definitive cure remains an elusive goal for the majority of patients. Antigen-specific tumor immunotherapy has the potential to improve clinical outcome in patients with such diseases by eradicating chemotherapy-resistant tumor cell clones without damaging normal tissues. Dendritic cells (DCs) serve as an essential link between the innate and the adaptive immune systems, acting as key controllers of antigen-specific T cell responses. Molecular identification of tumor-specific antigens recognized by T lymphocytes and technical advances in ex vivo generation of human DCs has enabled us to develop DC-based tumor immunotherapies (also called "DC vaccines"). To date, a large number of clinical trials of DC vaccines have been conducted for a variety of tumors, including hematological malignancies. Overall, these trials have demonstrated that DC vaccines have excellent safety profiles, moderate immunological activity, and mild clinical efficacy. To establish a role for DC vaccines in the treatment of hematological malignancies, we need both to define patient populations that can obtain clinical benefit from DC vaccines and to develop combination therapies that augment clinical efficacy of DC vaccines. In this review, I will describe current status of DC-based immunotherapy for hematological malignancies, and discuss future perspectives in this field.

  17. ALA 2010: Where to Eat in DC

    Science.gov (United States)

    Library Journal, 2010

    2010-01-01

    As host to visitors and transplants from around the world, Washington, DC, benefits from the constant infusion of different cultures. Although most neighborhoods lack a unified culinary flavor, make no mistake: DC is a city of distinctive areas, each with its own style, ensuring that hungry American Library Association (ALA) 2010 conference…

  18. Modelling of flow phenomena during DC casting

    NARCIS (Netherlands)

    Zuidema, J.

    2005-01-01

    Modelling of Flow Phenomena during DC Casting Jan Zuidema The production of aluminium ingots, by semi-continuous casting, is a complex process. DC Casting stands for direct chill casting. During this process liquid aluminium transforms to solid aluminium while cooling down. This is not an instanta

  19. Modelling of flow phenomena during DC casting

    NARCIS (Netherlands)

    Zuidema, J.

    2005-01-01

    Modelling of Flow Phenomena during DC Casting Jan Zuidema The production of aluminium ingots, by semi-continuous casting, is a complex process. DC Casting stands for direct chill casting. During this process liquid aluminium transforms to solid aluminium while cooling down. This is not an

  20. Close-Range Gunfire around DC Schools

    Science.gov (United States)

    Bieler, Sam; La Vigne, Nancy

    2014-01-01

    This report examines the incidence of gunfire as measured by gunshot detection technology using data from the 2011-2012 school year. It finds that a disproportionate volume of gunfire happened near a small share of DC schools. About half of DC schools covered by gunshot detection sensors are in close proximity to gunfire, and four schools were…

  1. Electronic DC transformer with high power density

    NARCIS (Netherlands)

    Pavlovský, M.

    2006-01-01

    This thesis is concerned with the possibilities of increasing the power density of high-power dc-dc converters with galvanic isolation. Three cornerstones for reaching high power densities are identified as: size reduction of passive components, reduction of losses particularly in active components

  2. DC-based magnetic field controller

    Energy Technology Data Exchange (ETDEWEB)

    Kotter, Dale K. (Shelley, ID); Rankin, Richard A. (Ammon, ID); Morgan, John P,. (Idaho Falls, ID)

    1994-01-01

    A magnetic field controller for laboratory devices and in particular to dc operated magnetic field controllers for mass spectrometers, comprising a dc power supply in combination with improvements to a hall probe subsystem, display subsystem, preamplifier, field control subsystem, and an output stage.

  3. DC-based magnetic field controller

    Energy Technology Data Exchange (ETDEWEB)

    Kotter, D.K.; Rankin, R.A.; Morgan, J.P.

    1994-05-31

    A magnetic field controller is described for laboratory devices and in particular to dc operated magnetic field controllers for mass spectrometers, comprising a dc power supply in combination with improvements to a Hall probe subsystem, display subsystem, preamplifier, field control subsystem, and an output stage. 1 fig.

  4. A Component-Reduced Zero-Voltage Switching Three-Level DC-DC Converter

    DEFF Research Database (Denmark)

    Qin, Zian; Pang, Ying; Wang, Huai;

    2016-01-01

    The basic Zero-Voltage Switching (ZVS) three-level DC-DC converter has one clamping capacitor to realize the ZVS of the switches, and two clamping diodes to clamp the voltage of the clamping capacitor. In order to reduce the reverse recovery loss of the diode as well as its cost, this paper...... proposes to remove one of the clamping diodes in basic ZVS three-level DC-DC converter. With less components, the proposed converter can still have a stable clamping capacitor voltage, which is clamped at half of the dc link voltage. Moreover, the ZVS performance will be influenced by removing the clamping...

  5. Drilling history core hole DC-4

    Energy Technology Data Exchange (ETDEWEB)

    1978-12-01

    Core hole DC-4 was completed at a depth of 3998 feet in December, 1978 by Boyles Brothers Drilling Company, Spokane, Washington, under subcontract to Fenix and Scission, Inc. The hole was cored for the US Department of Energy and the Rockwell Hanford Operations' Basalt Waste Isolation Program. Fenix and Sicsson, Inc. furnished the engineering, daily supervision of the cable tool and core drilling activities, and geological core logging for DC-4. Core hole DC-4 is located on the Hanford Site about 3 miles east of the Yakima Barricade and approximately 103 feet southwest of rotary hole DC-5, which was completed to 3990 feet in February, 1978. Hanford Site coordinates reported for hole DC-4 are north 49,385.62 feet and west 85,207.63 feet, and Washington State coordinates are north 454,468.73 feet and east 2,209,990.87 feet. No elevation survey is available for hole DC-4, but it is approximately 745 feet above mean sea level based upon the survey of hole DC-5, which has a reported elevation of 745.16 feet on the top of the 3-inch flange. The purpose of core hole DC-4 was to core drill vertically through the basalt and interbed units for stratigraphic depth determination and core collection, and to provide a borehole for hydrologic testing, cross-hole seismic shear, and pressure wave velocity studies with rotary hole DC-5. Hole DC-4 was drilled through the overburden into basalt bedrock by cable tool methods (0-623 feet) and continuously cored through the final interval (623 to 3998 feet).Core recovery was 95.8 percent of the total footage cored.

  6. Controlling DC-DC converters by chaos-based pulse width modulation to reduce EMI

    Energy Technology Data Exchange (ETDEWEB)

    Li Hong [Department of Mathematics and Computer Science, FernUniversitaet in Hagen, 58084 Hagen (Germany)], E-mail: hong.li@FernUni-Hagen.de; Zhang Bo [School of Electric Power, South China University of Technology, Guangzhou (China); Li Zhong; Halang, Wolfgang A. [Department of Mathematics and Computer Science, FernUniversitaet in Hagen, 58084 Hagen (Germany); Chen Guanrong [Department of Electronic Engineering, City University of Hong Kong, Hong Kong (China)

    2009-11-15

    In this paper, periodic and chaotic behaviors of DC-DC converters under certain parametric conditions are simulated, experimentally verified, and analyzed. Motivated by the work of J.H.B. Deane and D.C. Hamill in 1996, where chaotic phenomena are useful in suppressing electromagnetic interference (EMI) by adjusting the parameters of the DC-DC converter and making it operate in chaos, a chaos-based pulse width modulation (CPWM) is proposed to distribute the harmonics of the DC-DC converters continuously and evenly over a wide frequency range, thereby reducing the EMI. The output waves and spectral properties of the EMI are simulated and analyzed as the carrier frequency or amplitude changes with regard to different chaotic maps. Simulation and experimental results are given to illustrate the effectiveness of the proposed CPWM, which provides a good example of applying chaos theory in engineering practice.

  7. Voltage Tracking of a DC-DC Flyback Converter Using Neural Network Control

    Directory of Open Access Journals (Sweden)

    Wahyu Mulyo Utomo

    2012-01-01

    Full Text Available This paper proposes a neural network control scheme of a DC-DC Flyback converter that will step up a 12V DC and applied it on brushless DC motor with 12 and 24V dc. In this technique, a back propagation learning algorithm is derived. The controller is designed to track the output voltage of the DC-DC converter and to improve performance of the Flyback converter during transient operations. Furthermore, to investigate the effectiveness of the proposed controller, some operations such as starting-up and reference voltage variations are verified. The numerical simulation results show that the proposed controller has a better performance compare to the conventional PI-Controller method.

  8. High Current Planar Magnetics for High Efficiency Bidirectional DC-DC Converters for Fuel Cell Applications

    DEFF Research Database (Denmark)

    Pittini, Riccardo; Zhang, Zhe; Andersen, Michael A. E.

    2014-01-01

    Efficiency is one of the main concerns during the design phase of switch mode power supply. Planar magnetics based on PCB windings have the potential to reduce the magnetic manufacturing cost however, one of their main drawbacks comes from their low filling factor and high stray capacitance....... This paper presents an analysis of different planar windings configurations focusing on dc and ac resistances in order to achieve highly efficiency in dc-dc converters. The analysis considers different copper thicknesses form 70 μm up to 1500 μm (extreme copper PCB) taking into account manufacturing...... complexity and challenges. The analysis is focused on a high current inductor for a dc-dc converter for fuel cell applications and it is based on FEM simulations. Analysis and results are verified on a 6 kW dc-dc isolated full bridge boost converter prototype based on fully planar magnetics achieving a peak...

  9. A high voltage ratio and low ripple interleaved DC-DC converter for fuel cell applications.

    Science.gov (United States)

    Chang, Long-Yi; Chao, Kuei-Hsiang; Chang, Tsang-Chih

    2012-01-01

    This paper proposes a high voltage ratio and low ripple interleaved boost DC-DC converter, which can be used to reduce the output voltage ripple. This converter transfers the low DC voltage of fuel cell to high DC voltage in DC link. The structure of the converter is parallel with two voltage-doubler boost converters by interleaving their output voltages to reduce the voltage ripple ratio. Besides, it can lower the current stress for the switches and inductors in the system. First, the PSIM software was used to establish a proton exchange membrane fuel cell and a converter circuit model. The simulated and measured results of the fuel cell output characteristic curve are made to verify the correctness of the established simulation model. In addition, some experimental results are made to validate the effectiveness in improving output voltage ripple of the proposed high voltage ratio interleaved boost DC-DC converters.

  10. Theory of multi-phase PWM DC/DC converter%多相PWM控制DC/DC变换器

    Institute of Scientific and Technical Information of China (English)

    陈小明

    2001-01-01

    @@ 概述 近年来,随着一些高性能CPU的出现,如Pentium 4、Athlon等,需要输出电压更小,更大电流的DC/DC变换器,对热性能、EMI及负载瞬变应答(Load Transient)的要求也不断提高.传统的单相DC/DC变换器日益显示出局限性.多相DC/DC变换器以其独特的性能,为高性能CPU电源的解决方案开辟的一条新路.

  11. Swarming Speed Control for DC Permanent Magnet Motor Drive via Pulse Width Modulation Technique and DC/DC Converter

    Directory of Open Access Journals (Sweden)

    A.S. Oshaba

    2013-05-01

    Full Text Available This study presents an approach for the speed control of a permanent magnet DC motor drive via Pulse Width Modulation (PWM technique and a DC/DC converter. The Particle Swarm Optimization (PSO technique is used to minimize a time domain objective function and obtain the optimal controller parameters. The performance of the proposed technique has been evaluated using various types of disturbances including load torque variations. Simulation results illustrate clearly the robustness of the controller and validity of the design technique for controlling the speed of permanent magnet motors.

  12. DC/DC开关变换器混沌现象研究综述%Summary of the Research on Chaos Phenomena of DC/DC Converter

    Institute of Scientific and Technical Information of China (English)

    蔚洋; 冯平

    2012-01-01

    DC/DC功率开关变换器是开关电源的核心部分,通过对其混沌现象的研究可以更加深刻地认识DC/DC变换器的本质,也会在将来基于混沌现象提出新的设计方法和控制策略,实现现有DC/DC变换器无法达到的性能.本文介绍了DC/DC变换器混沌现象的研究现状,对DC/DC变换器混沌现象的基本建模方法进行了综合对比分析,展望了DC/DC变换器混沌研究的发展和未来应用前景.%DC/DC power switch converter is the core part of switch power supply. Through the study of chaos phenomena, the essence of DC/DC converter can be more deeply understand, the new design methods and control strategies based on chaos phenomena will be put forward in the future, to achieve the existing DC/DC converter that cannot reach. This paper introduces the research status of the DC/DC converter chaos phenomena, makes comprehensive comparative analysis of the basic modeling method of DC/DC converter chaos phenomena, and looks to its development and future application prospect.

  13. Pulsed-DC DBD Plasma Actuators

    Science.gov (United States)

    Duong, Alan; McGowan, Ryan; Disser, Katherine; Corke, Thomas; Matlis, Eric

    2016-11-01

    A new powering system for dielectric barrier discharge (DBD) plasma actuators that utilizes a pulsed-DC waveform is presented. The plasma actuator arrangement is identical to most typical AC-DBD designs with staggered electrodes that are separated by a dielectric insulator. However instead of an AC voltage input to drive the actuator, the pulsed-DC utilizes a DC voltage source. The DC source is supplied to both electrodes, and remains constant in time for the exposed electrode. The DC source for the covered electrode is periodically grounded for very short instants and then allowed to rise to the source DC level. This process results in a plasma actuator body force that is significantly larger than that with an AC-DBD at the same voltages. The important characteristics used in optimizing the pulsed-DC plasma actuators are presented. Time-resolved velocity measurements near the actuator are further used to understand the underlying physics of its operation compared to the AC-DBD. Supported by NASA Glenn RC.

  14. Control and dynamic analysis of a parallel-connected single active bridge DC-DC converter for DC-grid wind farm application

    DEFF Research Database (Denmark)

    Park, Kiwoo; Chen, Zhe

    2015-01-01

    This study presents a control strategy and its dynamic analysis of a high-power dc-dc converter, which is constructed with the parallel-connected single active bridge (SAB) dc-dc converters for dc-grid wind farm applications. The structural and operational characteristics of the SAB dc-dc converter...... have several advantages for high-power applications, and the modular concept of the parallel-connected converter is highly beneficial especially for offshore wind farm applications in terms of maintenance cost and fault tolerance. To justify the feasibility of the parallel-connected SAB dc-dc converter...... for dc-grid wind farm applications, an input voltage control method based on the PI control will be introduced and the dynamics of the overall system will be analysed. The analysis results are to be verified by means of simulations and experiments....

  15. Expression of DC-SIGN and DC-SIGNRs in placentas of HIV-positive patients

    Directory of Open Access Journals (Sweden)

    Komala Pillay

    2014-09-01

    Full Text Available Background. Human dendritic cell-specific intracellular adhesion molecule-3 (ICAM3-grabbing non-integrin (DC-SIGN is a mannose-binding lectin that initiates interaction between dendritic cells and resting T-lymphocytes. DC-SIGN is highly expressed in placental tissue on dendritic cells and Hofbauer cells, and it is suggested that HIV may become adsorbed to DC-SIGN on Hofbauer cells as part of the mechanism of mother-to-child HIV transmission. A possible mechanism of transfer of the virus from the Hofbauer cells to the fetus is the subsequent adsorption to DC-SIGN-related molecules (DC-SIGNRs, present on immediately adjacent capillary vascular endothelium. However, data on DC-SIGN and DC-SIGNR expression in the placenta are few.Methods. Forty term placentas from HIV-positive mothers and 21 term placentas from HIV-negative mothers underwent immunohistochemistry staining for DC-SIGN and DC-SIGNR expression. Five random sets of 10 villi were assessed, and the average number of positive cells were counted in each case. In addition, where possible, maternal and cord blood viral loads and maternal CD4+ counts were performed in the HIV-positive group only.Results. The median maternal CD4+ count was 377 cells/µl and 27% of participants had undetectable viral loads; the median detectable viral load was 3.72 log. Most (97% of the cord bloods tested in infants from HIV-positive mothers had lower than detectable viral loads. HIV-positive cases had significantly greater expression of both DC-SIGNRs (median values in HIV-positive cases, 14.5 positive cells/10 villi (pc/10villi, compared with 11 pc/10villi in HIV-negative cases, p=0.020 and DC-SIGN (median value in HIV-positive cases, 26.5 pc/10villi, compared with 23 pc/10villi in HIV-negative cases, p=0.037. DC-SIGNR expression was also noted in Hofbauer cells and decidual macrophages in addition to endothelium (reported currently. There was no difference in expression of DC-SIGN and DC-SIGNRs in patients

  16. Robust DC/DC converter control for polymer electrolyte membrane fuel cell application

    Science.gov (United States)

    Wang, Ya-Xiong; Yu, Duck-Hyun; Chen, Shi-An; Kim, Young-Bae

    2014-09-01

    This study investigates a robust controller in regulating the pulse width modulation (PWM) of a DC/DC converter for a polymer electrolyte membrane fuel cell (PEMFC) application. A significant variation in the output voltage of a PEMFC depends on the power requirement and prevents a PEMFC from directly connecting to a subsequent power bus. DC/DC converters are utilized to step-up or step-down voltage to match the subsequent power bus voltage. In this study, a full dynamic model, which includes a PEMFC and boost and buck DC/DC converters, is developed under MATLAB/Simulink environment for control. A robust PWM duty ratio control for the converters is designed using time delay control (TDC). This control enables state variables to accurately follow the dynamics of a reference model using time-delayed information of plant input and output information within a few sampling periods. To prove the superiority of the TDC performance, traditional proportional-integral control (PIC) and model predictive control (MPC) are designed and implemented, and the simulation results are compared. The efficacies of TDC for the PEMFC-fed PWM DC/DC converters are validated through experimental test results using a 100 W PEMFC as well as boost and buck DC/DC converters.

  17. High power density dc/dc converter: Selection of converter topology

    Science.gov (United States)

    Divan, Deepakraj M.

    1990-01-01

    The work involved in the identification and selection of a suitable converter topology is described. Three new dc/dc converter topologies are proposed: Phase-Shifted Single Active Bridge DC/DC Converter; Single Phase Dual Active Bridges DC/DC Converter; and Three Phase Dual Active Bridges DC/DC Converter (Topology C). The salient features of these topologies are: (1) All are minimal in structure, i.e., each consists of an input and output bridge, input and output filter and a transformer, all components essential for a high power dc/dc conversion process; (2) All devices of both the bridges can operate under near zero-voltage conditions, making possible a reduction of device switching losses and hence, an increase in switching frequency; (3) All circuits operate at a constant frequency, thus simplifying the task of the magnetic and filter elements; (4) Since, the leakage inductance of the transformer is used as the main current transfer element, problems associated with the diode reverse recovery are eliminated. Also, this mode of operation allows easy paralleling of multiple modules for extending the power capacity of the system; (5) All circuits are least sensitive to parasitic impedances, infact the parasitics are efficently utilized; and (6) The soft switching transitions, result in low electromagnetic interference. A detailed analysis of each topology was carried out. Based on the analysis, the various device and component ratings for each topology operating at an optimum point, and under the given specifications, are tabulated and discussed.

  18. Novel bidirectional DC-DC converters based on the three-state switching cell

    Science.gov (United States)

    da Silva Júnior, José Carlos; Robles Balestero, Juan Paulo; Lessa Tofoli, Fernando

    2016-05-01

    It is well known that there is an increasing demand for bidirectional DC-DC converters for applications that range from renewable energy sources to electric vehicles. Within this context, this work proposes novel DC-DC converter topologies that use the three-state switching cell (3SSC), whose well-known advantages over conventional existing structures are ability to operate at high current levels, while current sharing is maintained by a high frequency transformer; reduction of cost and dimensions of magnetics; improved distribution of losses, with consequent increase of global efficiency and reduction of cost associated to the need of semiconductors with lower current ratings. Three distinct topologies can be derived from the 3SSC: one DC-DC converter with reversible current characteristic able to operate in the first and second quadrants; one DC-DC converter with reversible voltage characteristic able to operate in the first and third quadrants and one DC-DC converter with reversible current and voltage characteristics able to operate in four quadrants. Only the topology with bidirectional current characteristic is analysed in detail in terms of the operating stages in both nonoverlapping and overlapping modes, while the design procedure of the power stage elements is obtained. In order to validate the theoretical assumptions, an experimental prototype is also implemented, so that relevant issues can be properly discussed.

  19. Studi Komparasi Fungsi Keanggotaan Fuzzy sebagai Kontroler Bidirectional DC-DC Converter pada Sistem Penyimpan Energi

    Directory of Open Access Journals (Sweden)

    Eka Prasetyono

    2015-09-01

    Full Text Available Bidirectional DC-DC converter is needed in the energy storage system. The converter topology used in this paper was a non-isolated bidirectional DC-DC buck-boost converter. This converter worked in two ways, which the charging mode stored energy into battery when load current was less than nominal main DC current (set point and discharging mode transferred energy from battery to the load when its current exceeded set point value. Both of these modes worked automatically according to the load current. The charging and discharging currents were controlled by fuzzy logic controller which was implemented on microcontroller ARM Cortex-M4F STM32F407VG. This paper compares two types of fuzzy membership function (triangular and sigmoid in controlling bidirectional DC-DC converter. The results showed that fuzzy logic controller with triangle membership function and sigmoid as control bidirectional DC-DC converter had no significant different response, both had an average error for charging and discharging process under 4% with ripple current on the main DC bus around 0.5%. The computing time of program for fuzzy logic controller with triangular membership functions had 19.01% faster than sigmoid, and fuzzy logic computation time on a microcontroller with hardware floating point was 60% faster than software floating point.

  20. Study on the Control Algorithm of Two-Stage DC-DC Converter for Electric Vehicles

    Directory of Open Access Journals (Sweden)

    Changhao Piao

    2014-01-01

    Full Text Available The fast response, high efficiency, and good reliability are very important characteristics to electric vehicles (EVs dc/dc converters. Two-stage dc-dc converter is a kind of dc-dc topologies that can offer those characteristics to EVs. Presently, nonlinear control is an active area of research in the field of the control algorithm of dc-dc converters. However, very few papers research on two-stage converter for EVs. In this paper, a fixed switching frequency sliding mode (FSFSM controller and double-integral sliding mode (DISM controller for two-stage dc-dc converter are proposed. And a conventional linear control (lag is chosen as the comparison. The performances of the proposed FSFSM controller are compared with those obtained by the lag controller. In consequence, the satisfactory simulation and experiment results show that the FSFSM controller is capable of offering good large-signal operations with fast dynamical responses to the converter. At last, some other simulation results are presented to prove that the DISM controller is a promising method for the converter to eliminate the steady-state error.

  1. Superconducting DC homopolar motors for ship propulsion

    Energy Technology Data Exchange (ETDEWEB)

    Heiberger, M.; Reed, M.R.; Creedon, W.P.; O' Hea, B.J. [General Atomic (United States)

    2000-07-01

    Superconducting DC homopolar motors have undergone recent advances in technology, warranting serious consideration of their use for ship propulsion. Homopolar motor propulsion is now practical because of two key technology developments: cryogen-free superconducting refrigeration and high performance motor fiber brushes. These compact motors are ideal for podded applications, where reduced drag and fuel consumption are predicted. In addition, the simple DC motor controller is more efficient and reliable compared with AC motor controllers. Military ships also benefit from increased stealth implicit in homopolar DC excitation, which also allows the option for direct hull or pod mounting. (authors)

  2. DC-Compensated Current Transformer †

    Science.gov (United States)

    Ripka, Pavel; Draxler, Karel; Styblíková, Renata

    2016-01-01

    Instrument current transformers (CTs) measure AC currents. The DC component in the measured current can saturate the transformer and cause gross error. We use fluxgate detection and digital feedback compensation of the DC flux to suppress the overall error to 0.15%. This concept can be used not only for high-end CTs with a nanocrystalline core, but it also works for low-cost CTs with FeSi cores. The method described here allows simultaneous measurements of the DC current component. PMID:26805830

  3. A series array of dc SQUIDs

    Energy Technology Data Exchange (ETDEWEB)

    Welty, R.P. (Colorado Univ., Boulder, CO (United States). Dept. of Electrical Engineering); Martinis, J.M. (Geraghty and Miller, Inc., Reston, VA (United States))

    1991-03-01

    This paper reports on a series array of 100 dc SQUIDs using trilayer Nb-AlO{sub x}-Nb junctions. The SQUIDs are modulated with a common flux bias line and produce an output voltage swing of several millivolts across the array. The large output voltage will allow direct connection to room temperature electronics without the transformer coupling and resulting frequency limitations commonly associated with dc SQUID amplifiers. The authors measured a bandwidth of dc to at least 175 MHz for a 100-SQUID array. The series array will be used as the output stage for a multistage integrated SQUID amplifier.

  4. Constant switching frequency control-based linear-assisted DC/DC regulator for photovoltaic solar-powered facilities

    OpenAIRE

    Martínez García, Herminio; Grau Saldes, Antoni

    2015-01-01

    Hybrid DC-DC regulators or linear–assisted DC-DC regulators are structures that combine both a linear voltage regulator and a switching DC-DC converter. The main objective of this hybrid topology is to converge, in a single circuit topology, the best of both alternatives: One the one hand, obtaining small voltage output ripple, which is typical of linear regulator structures, and, on the other, achieving good energy efficiency, as in switching alternatives. While the linear regulator fixes th...

  5. LLC resonant half-bridge circuit design with DC-DC%LLC谐振半桥DC-DC电路设计

    Institute of Scientific and Technical Information of China (English)

    杨磊; 吴晓光; 羊彦

    2013-01-01

    LED drive power level after the DC-DC constant current circuit using LLC resonant half-bridge topology structure, and through the output current and voltage feedback loop to achieve constant current limiting function.LLC resonant half-bridge DC-DC constant current circuit power part comprises a resonant circuit and the output of the rectifier circuit, the control part chip power supply circuit, the control chip peripheral circuit, an output feedback loop, the test shows that the system has stable output can be good, long time working with high efficiency.%LED驱动电源的后级DC-DC恒流电路采用LLC谐振半桥的拓扑结构,并通过输出的电流电压双环反馈来实现恒流限压功能.LLC谐振半桥DC-DC恒流电路的功率部分包括了谐振电路和输出整流电路,控制部分有芯片供电电路、控制芯片外围电路、输出反馈回路等,经试验证明该系统输出稳定好,能够长时间高效工作.

  6. CALIDAD DE SUEÑO EN MUJERES VÍCTIMAS DE ASALTO SEXUAL EN BOGOTÁ Sleep disorders and sleep quality in female victims of rape in Bogota

    Directory of Open Access Journals (Sweden)

    Franklin Escobar Córdoba

    2006-03-01

    Full Text Available Antecedentes: las alteraciones del sueño están presentes en víctimas de asalto sexual, siendo importante determinar su frecuencia, comorbilidad y asociaciones posibles. Objetivos: determinar la prevalencia de alteraciones del sueño y explorar la calidad del sueño en una muestra de mujeres víctimas de asalto sexual en Bogotá. Material y métodos: estudio descriptivo transversal, realizado en 2004, en una muestra de mujeres víctimas de asalto sexual que aceptaron participar en la investigación mediante consentimiento informado. Se aplicaron las escalas de autoevaluación validadas nacionalmente: índice de calidad de sueño de Pittsburgh y escala de somnolencia de Epworth. Resultados. Las mujeres estudiadas fueron jóvenes, de estrato socioeconómico bajo y medio, la mayoría sin relación de pareja estable, con talla de 1.59 m. en promedio (IC95%=1.55-1.61, peso de 52 Kg. en promedio (IC95%=48.77-55.45 y un promedio de IMC de 21.28 (IC95%=20.16-21.77. Se encontró somnolencia diurna excesiva en 10/34 (29.41% víctimas, mala calidad de sueño en 22/34 (64.71%, eficiencia inadecuada del sueño en 18/34 (52.94%, perturbaciones del sueño en 20/34 (52.94%, síntomas presuntivos de trastornos respiratorios ligados al sueño y consumo de hipnóticos en 9/34 (26.47%; insomnio y pesadillas en 23/34 (67.65%, hallazgos similares a los informados en otros estudios. Conclusión. La prevalencia de alteraciones del sueño y la calidad de sueño en la población estudiada es cuantitativamente importante y similar a la encontrada en otros estudios.Background: sleep disorders area present in victims of sexual assault, being important to determinc ist possible frequency, comorbidity and associations. Objective: to determine the prevalence of sleep disorders and explore the sleep quality in a group of female victims of rape in Bogota. Material and methods: a cross-sectional descriptive study was conducted in 2004 with a sample of female victims of rape who

  7. Determination of input/output characteristics of full-bridge AC/DC/DC converter for arc welding

    OpenAIRE

    Stefanov, Goce; Karadzinov, Ljupco; Sarac, Vasilija; Cingoski, Vlatko; Gelev, Saso

    2016-01-01

    This paper describes the design and practical implementation of AC/DC/DC converter in mode of arc welding. An analysis of the operation of AC/DC/DC converter and its input/output characteristics are determined with computer simulations. The practical part is consisted of AC/DC/DC converter prototype for arc welding with output power of 3 kW and switching frequency of 64 kHz. The operation of AC/DC/DC converter is validated with experimental measurements.

  8. Barrio La Cecilia, Bogota, Colombia

    OpenAIRE

    Karydi, Myrto; Montalban, Alba; Mrani, Anissa; Ocaña, Patricia; Peña, Paula

    2012-01-01

    El barrio de "La Cecilia" es un barrio ilegal por encontrarse en un terreno protegido, por lo tanto es necesario frenar la expansión y generar un nievo límite. En paralelo la ausencia de equipamientos y de espacio público, unido a un saneamiento sanitario existente precario hacen que no se cumplan los criterios de Habitabilidad Básica en el barrio. El proyecto que se propone plantea, aprovechando el plan de intervención en el espacio protegido de los Cerros Orientales, la creación de un nuev...

  9. (PFC) converters feeding brushless DC motor drive

    African Journals Online (AJOL)

    DR OKE

    harmonic distortion (THD) of supply current at AC mains for a wide range of ... An uncontrolled diode bridge rectifier (DBR) with high value of DC link ...... ac transmission systems), HVDC (High voltage direct current) transmission systems. Prof.

  10. Nonlinear Phenomena and Resonant Parametric Perturbation Control in QR-ZCS Buck DC-DC Converters

    Science.gov (United States)

    Hsieh, Fei-Hu; Liu, Feng-Shao; Hsieh, Hui-Chang

    The purpose of this study is to investigate the chaotic phenomena and to control in current-mode controlled quasi-resonant zero-current-switching (QR-ZCS) DC-DC buck converters, and to present control of chaos by resonant parametric perturbation control methods. First of all, MATLAB/SIMULINK is used to derive a mathematical model for QR-ZCS DC-DC buck converters, and to simulate the converters to observe the waveform of output voltages, inductance currents and phase-plane portraits from the period-doubling bifurcation to chaos by changing the load resistances. Secondly, using resonant parametric perturbation control in QR-ZCS buck DC-DC converters, the simulation results of the chaotic converter form chaos state turn into stable state period 1, and improve ripple amplitudes of converters under the chaos, to verify the validity of the proposes method.

  11. DC-DC Conversion Powering Schemes for the CMS Tracker at Super-LHC

    CERN Document Server

    Klein, Katja; Jussen, Rüdiger; Karpinski, Waclaw; Merz, Jennifer; Sammet, Jan

    2010-01-01

    The CMS experiment at the Large Hadron Collider (LHC) at CERN, Geneva, houses the largest silicon strip tracker ever built. For the foreseen luminosity upgrade of the LHC, the Super-LHC, however, a completely new silicon tracker will have to be constructed. One out of several major improvements currently under consideration is the implementation of a track trigger, with tracking information being provided to the first level trigger. Such an intelligent tracker design, utilising fast digital readout electronics, will most certainly lead to an increased power consumption, compared to today's tracker. In combination with the desire to reduce the amount of passive material inside the tracking volume and the impracticality to exchange or even add additional supply cables, a novel powering scheme will be inevitable. In this article a powering scheme based on DC-DC conversion is proposed, and requirements for the DC-DC converters are discussed. Studies of important DC-DC converter quantities such as th...

  12. The DC-DC conversion power system of the CMS Phase-1 pixel upgrade

    Science.gov (United States)

    Feld, L.; Karpinski, W.; Klein, K.; Lipinski, M.; Preuten, M.; Rauch, M.; Schmitz, St.; Wlochal, M.

    2015-01-01

    The pixel detector of the CMS experiment will be exchanged during the year-end technical stop in 2016/2017, as part of the experiment's Phase-1 upgrade. The new device will feature approximately twice the number of readout channels, and consequently the power consumption will be doubled. By moving to a DC-DC conversion powering scheme, it is possible to power the new pixel detector with the existing power supplies and cable plant. The power system of the Phase-1 pixel detector is described and the performance of the new components, including DC-DC converters, DC-DC converter motherboards and various power distribution boards, is detailed. The outcome of system tests in terms of electrical behaviour, thermal management and pixel module performance is discussed.

  13. Modelling and Simulation of Digital Compensation Technique for dc-dc Converter by Pole Placement

    Science.gov (United States)

    Shenbagalakshmi, R.; Sree Renga Raja, T.

    2015-09-01

    A thorough and effective analysis of the dc-dc converters is carried out in order to achieve the system stability and to improve the dynamic performance. A small signal modelling based on state space averaging technique for dc-dc converters is carried out. A digital state feedback gain matrix is derived by pole placement technique in order to achieve the stability of a completely controllable system. A prediction observer for the dc-dc converters is designed and a dynamic compensation (observer plus control law) is provided using separation principle. The output is very much improved with zero output voltage ripples, zero peak overshoot, and much lesser settling time in the range of ms and with higher overall efficiency (>90 %).

  14. DC-DC converters with reduced mass for trackers at the HL-LHC

    Science.gov (United States)

    Affolder, A.; Allongue, B.; Blanchot, G.; Faccio, F.; Fuentes, C.; Greenall, A.; Michelis, S.

    2011-11-01

    The development at CERN of low noise DC-DC converters for the powering of front-end systems enables the implementation of efficient powering schemes for the physics experiments at the HL-LHC. Recent tests made on the ATLAS short strip tracker modules confirm the full electromagnetic compatibility of the DC-DC converter prototypes with front-end detectors. The integration of the converters in the trackers front-ends needs to address also the material budget constraints. The impact of the DC-DC converters onto the material budget of the ATLAS tracker modules is discussed and mass reduction techniques are explored, leading to a compromise between electromagnetic compatibility and mass. Low mass shield implementations and Aluminum core inductors are proposed. Also, the impact on emitted noise due to a size reduction of critical components is discussed. Finally, material reduction techniques are discussed at the board layout and manufacturing levels.

  15. Efficient and ripple-mitigating dc-dc converter for residential fuel cell system

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Yong [Danfoss Solar Inverters, Hardware, Jyllandsgade 28, 6400 Soenderborg (Denmark); Choi, Seeyoung [Digital Appliance Division, Samsung Electronics Co. Ltd., Maetan-3Dong, Suwon, Gyeonggi (Korea); Lee, Eunchul [Willings Co. Ltd., SK Ventium, 522 Dangjung-Dong, Gunpo-Si, Gyeonggi-Do (Korea)

    2009-01-15

    Proton exchange membrane fuel cell (PEMFC) systems for residential application require efficient and ripple-mitigating power conditioning system (PCS). The key point to reach it, is the design and control of the dc-dc converter. Based on the theoretical and experimental analysis of the traditional converter, this paper proposes a novel parallel-series full bridge (P-SFB) dc-dc converter, and improves its phase shifting scheme. This paper also proposes a novel controller for low frequency ripple current suppressing applied on the converter. The experimental results verify that, the dc-dc converter achieves a peak efficiency of 95.5%. Therefore PCS's maximum efficiency reaches 92.9%. And the input current ripple is reduced significantly with the new controller. (author)

  16. Critical conditions of saddle-node bifurcations in switching DC-DC converters

    Science.gov (United States)

    Fang, Chung-Chieh

    2013-08-01

    Although existence of multiple periodic orbits in some DC-DC converters have been known for decades, linking the multiple periodic orbits with the saddle-node bifurcation (SNB) is rarely reported. The SNB occurs in popular DC-DC converters, but it is generally reported as a strange instability. Recently, design-oriented instability critical conditions are of great interest. In this article, average, sampled-data and harmonic balance analyses are applied and they lead to equivalent results. Many new critical conditions are derived. They facilitate future research on the instability associated with multiple periodic orbits, sudden voltage jumps or disappearances of periodic orbits observed in DC-DC converters. The effects of various converter parameters on the instability can be readily seen from the derived critical conditions. New Nyquist-like plots are also proposed to predict or prevent the occurrence of the instability.

  17. Simulation and Implementation of Interleaved Boost DC-DC Converter for Fuel Cell Application

    Directory of Open Access Journals (Sweden)

    Ahmad Saudi Samosir

    2011-10-01

    Full Text Available This paper deals with a boost dc-dc converter for fuel cell application. In fuel cell electric vehicles application, a high power boost dc-dc converter is adopted to adjust the output voltage, current and power of fuel cell engine to meet the vehicle requirements. One of challenge in designing a boost converter for high power application is how to handle the high current at the input side. In this paper an interleaved boost dc-dc converter is proposed for current sharing on high power application. Moreover, this converter also reduces the fuel ripple current. Performance of the interleaved boost converter is tested through simulation and experimental results. Keywords: component; Interleaved Boost Converter; Fuel Cell Electric Vehicle; high power application.  

  18. Application handbook for a Standardized Control Module (SCM) for DC-DC converters, volume 1

    Science.gov (United States)

    Lee, F. C.; Mahmoud, M. F.; Yu, Y.

    1980-01-01

    The standardized control module (SCM) was developed for application in the buck, boost and buck/boost DC-DC converters. The SCM used multiple feedback loops to provide improved input line and output load regulation, stable feedback control system, good dynamic transient response and adaptive compensation of the control loop for changes in open loop gain and output filter time constraints. The necessary modeling and analysis tools to aid the design engineer in the application of the SCM to DC-DC Converters were developed. The SCM functional block diagram and the different analysis techniques were examined. The average time domain analysis technique was chosen as the basic analytical tool. The power stage transfer functions were developed for the buck, boost and buck/boost converters. The analog signal and digital signal processor transfer functions were developed for the three DC-DC Converter types using the constant on time, constant off time and constant frequency control laws.

  19. Optimized photovoltaic generator-water electrolyser coupling through a controlled DC-DC converter

    Energy Technology Data Exchange (ETDEWEB)

    Garcia-Valverde, R.; Miguel, C.; Urbina, A. [Universidad Politecnica de Cartagena, Departamento de Electronica, Tecnologia de Computadoras y Proyectos, Plaza del Hospital, 1, Cartagena, 30203 Murcia (Spain); Martinez-Bejar, R. [Universidad de Murcia, Departamento de Ingenieria de la Informacion y las Comunicaciones, Facultad de Informatica, Campus de Espinardo, 30071 Murcia (Spain)

    2008-10-15

    The coupling of a photovoltaic generator and an electrolyser is one of the most promising options for obtaining hydrogen from a renewable energy source. Both are well known technologies, however, since the high variability of the solar radiation, an efficient coupling still presents some challenges. Direct or through a DC-DC converter couplings are the options in isolated applications. In this work, three models, respectively, for a photovoltaic (PV) generator, a controlled DC-DC converter and a complete proton exchange membrane (PEM) electrolyser have been designed by using Matlab/Simulink. A PV-electrolyser specific algorithm to search for the optimum and safe working point for both elements is presented. Simulation results demonstrate that the use of a controlled DC-DC converter with the proposed algorithm shows better adaptability to the variable radiation conditions than the other coupling options. Therefore, it leads to a better compliance between the electrolyser and the sizing of the PV generator. (author)

  20. Test Results of Selected Commercial DC/DC Converters under Cryogenic Temperatures - A Digest

    Science.gov (United States)

    Patterson, Richard; Hammoud, Ahmad

    2010-01-01

    DC/DC converters are widely used in space power systems in the areas of power management and distribution, signal conditioning, and motor control. Design of DC/DC converters to survive cryogenic temperatures will improve the power system performance, simplify design, and reduce development and launch costs. In this work, the performance of nine COTS modular, low-tomedium power DC/DC converters was investigated under cryogenic temperatures. The converters were evaluated in terms of their output regulation, efficiency, and input and output currents. At a given temperature, these properties were obtained at various input voltages and at different load levels. A summary on the performance of the tested converters was given. More comprehensive testing and in-depth analysis of performance under long-term exposure to extreme temperatures are deemed necessary to establish the suitability of these and other devices for use in the harsh environment of space exploration missions.

  1. Advanced DC/DC Converters Towards Higher Volumetric Efficiencies For Space Applications

    Science.gov (United States)

    Shaw, Harry; Shue, Jack; Liu, David; Wang, Bright; Plante, Jeanette

    2005-01-01

    A new emphasis on planetary exploration by NASA drives the need for small, high power DC/DC converters which are functionally modular. NASA GSFC and other government space organizations are supporting technology development in the DC/DC converter area to both meet new needs and to promote more sources of supply. New technologies which enable miniaturization such as embedded passive technologies and thermal management using high thermal conductivity materials are features of the new designs. Construction of some simple DC/DC converter core circuits using embedded components was found to be successful for increasing volumetric efficiency to 37 W/inch. The embedded passives were also able to perform satisfactorily in this application in cryogenic temperatures.

  2. Ultra-high Efficiency DC-DC Converter using GaN Devices

    DEFF Research Database (Denmark)

    Ramachandran, Rakesh

    2016-01-01

    The demands for high efficiency dc-dc power converters are increasing day by day in various applications such as telecommunication, data-centers, electric vehicles and various renewable energy systems. Silicon (Si) has been used as the semiconductor material in majority of the power devices...... properties of GaN devices can be utilized in power converters to make them more compact and highly efficient. This thesis entitled “Ultra-high Efficiency DC-DC Converter using GaN devices” focuses on achieving ultra-high conversion efficiency in an isolated dc-dc converter by the optimal utilization of Ga......N devices. Simple replacement of Si or SiC devices with GaN devices in the converter will not give an expected increase in efficiency or any improvement in the performance of the converter. The use of GaN devices has defined another dimension in the design of power converters, which mainly deals...

  3. Efficiency Enhancement of DC to DC Multilevel Boost Converter and Its Applications

    Directory of Open Access Journals (Sweden)

    R. Ravikumar

    2015-03-01

    Full Text Available The aim of this study is to propose a experimental verification for single-phase to three phase drive system composed of two parallel single-phase rectifiers, a three-phase inverter and an induction motor. Apart from traditional application in dc motor drives, new applications of BDC include energy storage in renewable energy systems, fuel cell energy systems, Hybrid Electric Vehicles (HEV and Uninterruptible Power Supplies (UPS. A dc-dc converter is always required to allow energy exchange between storage device and the rest of system. In HEV applications, BDCs are required to link different dc voltage buses and transfer energy between them. A non-isolated bi-directional dc-dc converters is used in our project to achieve better efficiency.

  4. The DC-DC converter reduces its size and increases its efficiency; Le convertisseur DC-DC reduit sa taille et augmente son rendement

    Energy Technology Data Exchange (ETDEWEB)

    Feste, J.P.

    2000-03-01

    The DC to DC converters built by the US SynQor company use a dual stage conversion technique. One stage is devoted to regulation and the other to insulation. This technique allows to combine a high efficiency (up to 90%) with small dimensions. Instead of the classical Schottky diodes, a synchronous MOSFET is used for the rectification of the low voltage current. A simple air flow is required for the cooling of these converters. Short paper. (J.S.)

  5. Solid-State dc Circuit Breaker

    Science.gov (United States)

    Harvey, P.

    1983-01-01

    Circuit breaker with no moving parts protects direct-current (dc) loads. Current which circuit breaker opens (trip current) is adjustable and so is time delay before breaker trips. Forward voltage drop rises from 0.6 to 1.2 V as current rises to trip point. Breaker has two terminals, like fuse, therefore replaces fuse in dc circuit. Powered by circuit it protects and reset by either turning off power source or disconnecting load.

  6. Brushless DC Motors, Velocity and Position Control of the Brushless DC Motor.

    Science.gov (United States)

    1986-06-01

    DC motor was designed using the Hall effect sensors. In addition, the position control of the brushless DC motor was developed using an optical encoder to sense angular position changes and a microprocessor to provide the desired position control. A Pittman 5111 wdg 1 brushless DC motor was used for this study. The design of the digital tachometer and pulse width modulator for velocity control and the design of the Z-80 based microprocessor controller and software design are described in

  7. The application of standardized control and interface circuits to three dc to dc power converters.

    Science.gov (United States)

    Yu, Y.; Biess, J. J.; Schoenfeld, A. D.; Lalli, V. R.

    1973-01-01

    Standardized control and interface circuits were applied to the three most commonly used dc to dc converters: the buck-boost converter, the series-switching buck regulator, and the pulse-modulated parallel inverter. The two-loop ASDTIC regulation control concept was implemented by using a common analog control signal processor and a novel digital control signal processor. This resulted in control circuit standardization and superior static and dynamic performance of the three dc-to-dc converters. Power components stress control, through active peak current limiting and recovery of switching losses, was applied to enhance reliability and converter efficiency.

  8. Model predictive control of bidirectional isolated DC-DC converter for energy conversion system

    Science.gov (United States)

    Akter, Parvez; Uddin, Muslem; Mekhilef, Saad; Tan, Nadia Mei Lin; Akagi, Hirofumi

    2015-08-01

    Model predictive control (MPC) is a powerful and emerging control algorithm in the field of power converters and energy conversion systems. This paper proposes a model predictive algorithm to control the power flow between the high-voltage and low-voltage DC buses of a bidirectional isolated full-bridge DC-DC converter. The predictive control algorithm utilises the discrete nature of the power converters and predicts the future nature of the system, which are compared with the references to calculate the cost function. The switching state that minimises the cost function is selected for firing the converter in the next sampling time period. The proposed MPC bidirectional DC-DC converter is simulated with MATLAB/Simulink and further verified with a 2.5 kW experimental configuration. Both the simulation and experimental results confirm that the proposed MPC algorithm of the DC-DC converter reduces reactive power by avoiding the phase shift between primary and secondary sides of the high-frequency transformer and allow power transfer with unity power factor. Finally, an efficiency comparison is performed between the MPC and dual-phase-shift-based pulse-width modulation controlled DC-DC converter which ensures the effectiveness of the MPC controller.

  9. Design of the DC-DC power stage of the capacitor charger for MAXIDISCAP power converters

    CERN Document Server

    Cravero, Jean-Marc

    2013-01-01

    This technical report presents the design of the DC-DC power stage of the capacitor charger for MAXIDISCAP power converters. The power stage is based on a half bridge series resonant converter in Discontinuous Conduction Mode (DCM). This simple and robust topology allows obtaining a current source behavior with a low switching losses power stage. The associated control stage is implemented using a commercial controller which has differenti nternal circuits that allows a high integration of the converter control system. The report presents the design and tuning criteria for the DC-DC converter, including the power stage and the control system.

  10. A Reduced-Part, Triple-Voltage DC-DC Converter for Electric Vehicle Power Management

    Energy Technology Data Exchange (ETDEWEB)

    Su, Gui-Jia [ORNL; Tang, Lixin [ORNL

    2007-01-01

    Electrical power systems in future hybrid and fuel cell vehicles may consist of three voltage nets; 14 V, 42 V and high voltage (>200 V) buses. A soft-switched, bi-directional dc-dc converter using only four switches was proposed for interconnecting the three nets. This paper presents a reduced- part dc-dc converter, which decreases the converter cost while retaining all the favorable features of the original topology. Simulation and experimental data are included to verify a simple power flow control scheme.

  11. High-Voltage DC-DC Converter Topology for PV Energy Utilization - Investigation and Implementation

    DEFF Research Database (Denmark)

    Sanjeevikumar, Padmanaban; Blaabjerg, Frede; Wheeler, Patrick

    2017-01-01

    This paper exploited the utilization of photovoltaic (PV) energy system with high-voltage (HV) output DC-DC converter. Classical boost converters are used for both renewable energy integration and HV applications, but limited by reducing output/efficiency in performance. Moreover, as parasitic...... elements suppress the power transfer ratio, converter needs to maximize the PV energy utilization. This investigation study focused to include additional parasitic elements (voltage-lift technique) to a standard DC-DC buck converter and to overcome all the above drawbacks to maximize the PV power...

  12. Laboratory manual for pulse-width modulated DC-DC power converters

    CERN Document Server

    Kazimierczuk, Marian K

    2015-01-01

    Designed to complement a range of power electronics study resources, this unique lab manual helps students to gain a deep understanding of the operation, modeling, analysis, design, and performance of pulse-width modulated (PWM) DC-DC power converters.  Exercises focus on three essential areas of power electronics: open-loop power stages; small-signal modeling, design of feedback loops and PWM DC-DC converter control schemes; and semiconductor devices such as silicon, silicon carbide and gallium nitride. Meeting the standards required by industrial employers, the lab manual combines program

  13. Efficiency and Regulation of Commercial Low Power DC/DC Converter Modules at Low Temperatures

    Science.gov (United States)

    Elbuluk, Malik E.; Gerber, Scott; Hammoud, Ahmad; Patterson, Richard L.

    2000-01-01

    DC/DC converters that are capable of operating at cryogenic temperatures are anticipated to play an important role in the power systems of future NASA deep space missions. Design of these converters to survive cryogenic temperatures will improve the power system performance, and reduce development and launch costs. At the NASA Glenn Research Center Low Temperature Electronics Laboratory, several commercial off-the-shelf dc/dc converter modules were evaluated for their low temperature performance. Various parameters were investigated as a function of temperature, in the range of 20 C to -190 C. Data pertaining to the efficiency and voltage regulation of the tested converters is presented and discussed.

  14. High power density dc/dc converter: Component selection and design

    Science.gov (United States)

    Divan, Deepakraj M.

    1989-01-01

    Further work pertaining to design considerations for the new high power, high frequency dc/dc converters is discussed. The goal of the project is the development of high power, high power density dc/dc converters at power levels in the multi-kilowatt to megawatt range for aerospace applications. The prototype converter is rated for 50 kW at a switching frequency of 50 kHz, with an input voltage of 200 Vdc and an output of 2000 Vdc. The overall power density must be in the vicinity of 0.2 to 0.3 kg/kW.

  15. Analysis of high voltage step-up nonisolated DC-DC boost converters

    Science.gov (United States)

    Alisson Alencar Freitas, Antônio; Lessa Tofoli, Fernando; Junior, Edilson Mineiro Sá; Daher, Sergio; Antunes, Fernando Luiz Marcelo

    2016-05-01

    A high voltage step-up nonisolated DC-DC converter based on coupled inductors suitable to photovoltaic (PV) systems applications is proposed in this paper. Considering that numerous approaches exist to extend the voltage conversion ratio of DC-DC converters that do not use transformers, a detailed comparison is also presented among the proposed converter and other popular topologies such as the conventional boost converter and the quadratic boost converter. The qualitative analysis of the coupled-inductor-based topology is developed so that a design procedure can be obtained, from which an experimental prototype is implemented to validate the theoretical assumptions.

  16. Interleaved DC-DC Converter with Discrete Duty Cycle and Open Loop Control

    Science.gov (United States)

    Kroics, K.; Sokolovs, A.

    2016-08-01

    The authors present the control principle of the multiphase interleaved DC-DC converter that can be used to vastly reduce output current ripple of the converter. The control algorithm can be easily implemented by using microcontroller without current loop in each phase. The converter works in discontinuous conduction mode (DCM) but close to boundary conduction mode (BCM). The DC-DC converter with such a control algorithm is useful in applications that do not require precise current adjustment. The prototype of the converter has been built. The experimental results of the current ripple are presented in the paper.

  17. Interleaved DC-DC Converter with Discrete Duty Cycle and Open Loop Control

    Directory of Open Access Journals (Sweden)

    Kroics K.

    2016-08-01

    Full Text Available The authors present the control principle of the multiphase interleaved DC-DC converter that can be used to vastly reduce output current ripple of the converter. The control algorithm can be easily implemented by using microcontroller without current loop in each phase. The converter works in discontinuous conduction mode (DCM but close to boundary conduction mode (BCM. The DC-DC converter with such a control algorithm is useful in applications that do not require precise current adjustment. The prototype of the converter has been built. The experimental results of the current ripple are presented in the paper.

  18. Medidas de control de tuberculosis en una institución de salud de Bogotá D.C

    Directory of Open Access Journals (Sweden)

    Alba I. Muñoz-Sánchez

    2016-02-01

    Full Text Available Resumen Objetivo: evaluar la implementación de medidas de control, de tipo administrativo, ambiental y de protección respiratoria, de la infección de tuberculosis en un hospital de III nivel de atención en la ciudad de Bogotá D.C. Metodología: estudio de tipo descriptivo, transversal. Para la recolección de datos se aplicó una herramienta de autorreporte a 158 trabajadores de la salud del hospital, se realizó una entrevista estructurada al responsable del programa institucional de control de tuberculosis y una visita de observación de un experto en salud y seguridad laboral a las diferentes áreas de trabajo, para indagar por la implementación de medidas de control de infección de tuberculosis en la institución. Resultados: el responsable del programa institucional de control de tuberculosis y 158 trabajadores de la salud del hospital objeto de estudio reportaron una deficiente implementación de medidas de control de tuberculosis, de tipo administrativo, ambiental y de protección respiratoria en la institución, lo cual fue corroborado por el experto. Conclusiones: la deficiente implementación de medidas de control de infección de tuberculosis en instituciones de la salud, y algunas condiciones de trabajo presentes pueden favorecer la exposición ocupacional de los trabajadores de la salud al Mycobacterium Tuberculosis. Abstract Objective: to evaluate the implementation of tuberculosis infection control measures in administrative, environmental and respiratory protection equipment in a third level hospital in Bogota D.C. Methodology: a descriptive, cross-sectional study. Data were collected through a self-reporting instrument applied on 158 health care workers. The chief officer of the institutional program for tuberculosis control participated in a structured interview. In addition, an expert in occupational health and safety conducted an observational visit to the different workplaces in order to inquire on the implementation

  19. Design of current source DC/DC converter and inverter for 2kW fuel cell application

    DEFF Research Database (Denmark)

    Andreiciks, A.; Steiks, I.; Krievs, O.

    2013-01-01

    of a DC/DC converter and an inverter. In this paper a detailed simulation study of such interfacing converter system comprising a double inductor push-pull step-up DC/DC converter and a cascaded H-bridge inverter has been carried out and further confirmed with experimental results. The power converter...

  20. Research on Two-channel Interleaved Two-stage Paralleled Buck DC-DC Converter for Plasma Cutting Power Supply

    DEFF Research Database (Denmark)

    Yang, Xi-jun; Qu, Hao; Yao, Chen

    2014-01-01

    As for high power plasma power supply, due to high efficiency and flexibility, multi-channel interleaved multi-stage paralleled Buck DC-DC Converter becomes the first choice. In the paper, two-channel interleaved two- stage paralleled Buck DC-DC Converter powered by three-phase AC power supply...

  1. Novel Step-Up DC/DC Converter with No Right Half Plane Zero and Reduced Switched Voltage Stress Characteristics

    DEFF Research Database (Denmark)

    Mostaan, Ali; Alizadeh, Ebrahim; Soltani, Mohsen

    2014-01-01

    Novel step-up DC/DC converter is introduced in this paper. This converter is realized with adding the switched capacitor voltage multiplier cell to the three switch step-down DC/DC converter that has been proposed in the literature. The proposed converter is analyzed in the steady state and the v...

  2. Comparative efficiency evaluation of buck and hybrid buck DC-DC converters for automotive applications

    DEFF Research Database (Denmark)

    Pelan, Ovidiu; Cornea, Octavian; Muntean, Nicolae

    2014-01-01

    This paper presents and discusses design considerations and efficiency investigation of a conventional step-down and a hybrid switched-capacitor DC-DC converter. Three MOSFETs with low on-resistance have been tested for each converter in order to find the most adequate switch for this application...

  3. Single Event Burnout in DC-DC Converters for the LHC Experiments

    Energy Technology Data Exchange (ETDEWEB)

    Claudio H. Rivetta et al.

    2001-09-24

    High voltage transistors in DC-DC converters are prone to catastrophic Single Event Burnout in the LHC radiation environment. This paper presents a systematic methodology to analyze single event effects sensitivity in converters and proposes solutions based on de-rating input voltage and output current or voltage.

  4. Very High Frequency Resonant DC/DC Converters for LED Lighting

    DEFF Research Database (Denmark)

    Madsen, Mickey Pierre; Knott, Arnold; Andersen, Michael A. E.

    2013-01-01

    This paper presents a very high frequency DC/DC converter for LED lighting. Several resonant topologies are compared and their usability discussed. At the end the resonant SEPIC converter is chosen based on the achievable power density and total bill of material. Simulations of a 51 MHz converter...

  5. Area-Efficiency Trade-Offs in Integrated Switched-Capacitor DC-DC Converters

    DEFF Research Database (Denmark)

    Spliid, Frederik Monrad; Larsen, Dennis Øland; Knott, Arnold

    2016-01-01

    This paper analyzes the relationship between efficiency and chip area in a fully integrated switched capacitor voltage divider dc-dc converter implemented in 180nm-technology and a 1/2 topology. A numerical algorithm for choosing the optimal sizes of individual components, in terms of power loss...

  6. A novel DC-DC convertor using LTCC technology for magnetic integration application

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Z Q [Research Institutes, University of Electronic Science and Technology of China, Chengdu (China); Shi, Y; Guo, H P; Yang, B C, E-mail: nanterxu@uestc.edu.cn [State key Laboratory of Electronic Thin Films and Integrated Devices, University of Electronic Science and Technology of China, Chengdu (China)

    2011-01-01

    A compact DC-DC convertor is proposed and fabricated in multilayer ferrite substrate using LTCC technology. The spiral conductors are buried into the ferrite substrate with a multilayer 3-D structure to reduce the volume of convertor. The passive integration of magnetic components and surface circuitry are achieved in a whole substrate and the size of module can be reduced markedly. The whole height of module is only 3mm, 1/3 of the height of conventional modules. Testing results indicate that the performance of the module is excellent in Point-of-Load (POL) field. The step-down DC-DC converter converts input voltage of 5V to output voltage of 3.3V. It is confirmed that the maximum conversion efficiency of 93.2% is sufficient for actual DC-DC converter application. Such a compact DC-DC convertor provides a compact, low cost and high reliability approach for power supply and magnetic integration application.

  7. Five-Level Active-Neutral-Point-Clamped DC/DC Converter

    DEFF Research Database (Denmark)

    Liu, Dong; Deng, Fujin; Chen, Zhe

    Multi-level converters are getting more and more attentions because of their obvious merits such as lower voltage stress and harmonic, smaller size of output filters, and so on. In this paper, a five-level active-neutral-point-clamped (5L-ANPC) dc/dc converter is proposed for power transfer...

  8. DC-DC conversion powering schemes for the CMS tracker at Super-LHC

    Energy Technology Data Exchange (ETDEWEB)

    Klein, K; Feld, L; Jussen, R; Karpinski, W; Merz, J; Sammet, J, E-mail: katja.klein@cern.c [I. Physikalisches Institut B, RWTH Aachen University, Aachen (Germany)

    2010-07-15

    The CMS experiment at the Large Hadron Collider (LHC) at CERN, Geneva, houses the largest silicon strip tracker ever built. For the foreseen luminosity upgrade of the LHC, the Super-LHC, however, a completely new silicon tracker will have to be constructed. One out of several major improvements currently under consideration is the implementation of a track trigger, with tracking information being provided to the first level trigger. Such an intelligent tracker design, utilising fast digital readout electronics, will most certainly lead to an increased power consumption, compared to today's tracker. In combination with the desire to reduce the amount of passive material inside the tracking volume and the impracticality to exchange or even add additional supply cables, a novel powering scheme will be inevitable. In this article a powering scheme based on DC-DC conversion is proposed, and requirements for the DC-DC converters are discussed. Studies of important DC-DC converter quantities such as the power efficiency, conducted and radiated noise levels, and material budget are presented, and a possible implementation of DC-DC buck converters into one proposed track trigger layout is sketched.

  9. Computer-aided analysis and simulation of switched dc-dc converters

    Science.gov (United States)

    Lee, F. C.; Yu, Y.

    1978-01-01

    State space techniques are employed to derive an equivalent nonlinear recurrent time-domain model that describes the switched dc-dc converter behavior exactly. This model is employed effectively to analyze both large signal behavior by propagating the recurrence equation and matching boundary conditions through digital computation and small signal behavior by linearizing it about the equilibrium state.

  10. Low noise DC to DC converters for the sLHC experiments

    Energy Technology Data Exchange (ETDEWEB)

    Allongue, B; Blanchot, G; Faccio, F; Fuentes, C; Michelis, S; Orlandi, S, E-mail: georges.blanchot@cern.c [CERN, Route de Meyrin, CH-1211 Geneva 23 (Switzerland)

    2010-11-15

    The development of front-end systems for the ATLAS tracker at the sLHC is now in progress and the availability of radiation tolerant buck converter ASICs enables the implementation of DC to DC converter based powering schemes. The front-end systems powered in this manner will be exposed to the radiated and conducted noise emitted by the converters. The electromagnetic compatibility between DC to DC converters and ATLAS short strip tracker hybrid prototypes has been studied with specific susceptibility tests. Different DC to DC converter prototypes have been designed following a noise optimization methodology to match the noise requirements of these front-end systems. The DC to DC converter developed in this manner presents a negligible emission of noise that was confirmed by system tests on an ATLAS tracker front-end module prototype. As a result of this, power converters can now be integrated in close vicinity of front-end chips without compromising their overall noise performance.

  11. A DC-DC conversion powering scheme for the CMS Phase-1 pixel upgrade

    Science.gov (United States)

    Feld, L.; Fleck, M.; Friedrichs, M.; Hensch, R.; Karpinski, W.; Klein, K.; Sammet, J.; Wlochal, M.

    2013-02-01

    The CMS pixel detector was designed for a nominal instantaneous LHC luminosity of 1ṡ1034 cm-2s-1. During Phase-1 of the LHC upgrade, the instantaneous luminosity will be increased to about twice this value. To preserve the excellent performance of the pixel detector despite the increase in particle rates and track densities, the CMS Collaboration foresees the exchange of its pixel detector in the shutdown 2016/2017. The new pixel detector will be improved in many respects, and will comprise twice the number of readout channels. A powering scheme based on DC-DC conversion will be adopted, which will enable the provision of the required power with the present cable plant. The powering scheme of the CMS pixel detector will be described, and the performance of prototype DC-DC buck converters will be presented, including power efficiency, system tests with DC-DC converters and pixel modules, thermal management, reliability at low temperature, and studies of potential frequency locking between DC-DC converters.

  12. Operation and control of a DC-grid offshore wind farm under DC transmission system faults

    DEFF Research Database (Denmark)

    Deng, Fujin; Chen, Zhe

    2013-01-01

    So far, all existing offshore wind farms have an ac collection system, and the collected power in the offshore wind farm is sent to an onshore ac grid through high-voltage ac (HVAC) or DC (HVDC) transmission lines. However, future of fshore wind farms may use dc also for power collection. Consequ...

  13. A Bidirectional Multi-Port DC-DC Converter Integrating Voltage Equalizer

    DEFF Research Database (Denmark)

    Chen, Jianfei; Hou, Shiying; Deng, Fujin

    2015-01-01

    with a uniform voltage level while eliminating the voltage imbalance. In addition, high step-down and step-up ratios with low component voltage stress can be achieved in the proposed converter. A bidirectional four-port dc-dc converter is presented to do theoretical analysis for the voltage equalization of three...

  14. DC-DC converter with a wide load range and a wide input-voltage range

    NARCIS (Netherlands)

    Ting, Y.

    2015-01-01

    This thesis investigated the possibility of increasing the efficiency of a DC-DC converter over a wide load range and a wide input-voltage range based on the Single Active Bridge (SAB) topology with two approaches. The first approach involved making changes to the topology whereas the second made us

  15. Modelling, Simulation and Construction of a DC/DC Boost Power Converter: A School Experimental System

    Science.gov (United States)

    Silva-Ortigoza, R.; Silva-Ortigoza, G.; Hernandez-Guzman, V. M.; Saldana-Gonzalez, G.; Marcelino-Aranda, M.; Marciano-Melchor, M.

    2012-01-01

    We introduce a dc/dc boost power converter as a didactic prototype intended to support courses on electric circuit analysis experimentally. The corresponding mathematical model is obtained, the converter is designed and an experimental setup is described, constructed and tested. Simplicity of construction as well as low cost of components renders…

  16. A Novel Quasi-SEPIC High-Voltage Boost DC-DC Converter

    DEFF Research Database (Denmark)

    Siwakoti, Yam Prasad; N. Soltani, Mohsen; Mostaan, Ali

    2017-01-01

    This paper proposes a modified coupled-inductor SEPIC dc-dc converter for low power and high voltage gain applications such as for piezoelectric drive systems. The converter uses the same components as of SEPIC converter with an additional diode. Compared to conventional topologies with similar v...

  17. Trans-inverse (Tx−1) high step-up DC-DC converter

    DEFF Research Database (Denmark)

    Siwakoti, Yam Prasad; Blaabjerg, Frede; Loh, Poh Chiang

    2015-01-01

    In this paper, a new magnetically coupled single-switch non-isolated dc-dc converter with a high voltage gain is proposed. The new topology utilizes a transformer to boost the output voltage. However, unlike other converter topologies with transformer or coupled magnetics, the voltage gain in the...

  18. Ultra-Step-Up DC-DC Converter with Integrated Autotransformer and Coupled Inductor

    DEFF Research Database (Denmark)

    Siwakoti, Yam Prasad; Blaabjerg, Frede; Loh, Poh Chiang

    2016-01-01

    This paper introduces a new single-switch nonisolated dc-dc converter with very high voltage transfer ratio and reduced semiconductor voltage stress. The converter utilizes an integrated autotransformer and a coupled inductor on the same core to achieve a high step-up voltage gain without extreme...

  19. Y-source impedance-network-based isolated boost DC/DC converter

    DEFF Research Database (Denmark)

    Siwakoti, Yam P.; Town, Graham; Loh, Poh Chiang

    2014-01-01

    A dc-dc converter with very high voltage gain is proposed in this paper for any medium-power application requiring a high voltage boost with galvanic isolation. The proposed converter topology can be realized using only two switches. With this topology a very high voltage boost can be achieved ev...

  20. Magnetically coupled high-gain Y-source isolated DC/DC converter

    DEFF Research Database (Denmark)

    Siwakoti, Yam P.; Loh, Poh Chiang; Blaabjerg, Frede

    2014-01-01

    A new form of magnetically coupled DC/DC converter is proposed for medium power applications (250 W to 2 kW), requiring a high-voltage gain, short inductive charging time and galvanic isolation. The proposed converter can be realised using a unique Y-source impedance network and a two-switch push...

  1. A high voltage gain quasi Z-source isolated DC/DC converter

    DEFF Research Database (Denmark)

    Siwakoti, Yam P.; Blaabjerg, Frede; Loh, Poh Chiang

    2014-01-01

    A compact quasi-Z-source DC/DC converter is presented with high voltage gain, isolated output, and improved efficiency. The improvements in size and performance were achieved by using a square wave inverter with only two output switches driving an isolating transformer in push-pull mode, followed...

  2. Planar integrated magnetics design in wide input range DC-DC converter for fuel cell application

    DEFF Research Database (Denmark)

    Ouyang, Ziwei; Zhang, Zhe; Thomsen, Ole Cornelius

    2010-01-01

    , hereby increasing the power density of converters. A new planar integrated magnetics (PIM) technique for a phase-shift plus duty cycle controlled hybrid bi-directional DC/DC converter is presented and investigated in this paper. The main magnetic components including one boost inductor and two...

  3. A Dual-Buck–Boost AC/DC Converter for DC Nanogrid With Three Terminal Outputs

    DEFF Research Database (Denmark)

    Wu, Weimin; Wang, Houqing; Liu, Yuan

    2017-01-01

    such as the low-voltage ac power system. There are three typical grounding configurations for a dc nanogrid: the united grounding, the unidirectional grounding, and the virtual isolated grounding. Each grounding configuration has its own specifications to ac/dc converters. In this paper, a dual-buck-boost ac...

  4. Quasiperiodicity and Torus Breakdown in a Power Electronic DC/DC Converter

    DEFF Research Database (Denmark)

    Zhusubaliyev, Zhanybai; Soukhoterin, Evgeniy; Mosekilde, Erik

    2007-01-01

    This paper discusses the mechanisms of torus formation and torus destruction in a dc/dc converter with relay control and hysteresis. We establish a chart of the dynamical modes in the input voltage versus load resistance parameter plane. This chart displays several different torus bifurcations...

  5. Multistability and hidden attractors in a multilevel DC/DC converter

    DEFF Research Database (Denmark)

    Zhusubaliyev, Zhanybai T.; Mosekilde, Erik

    2015-01-01

    for the hidden set in most cases has been so complicated that special analytic and/or numerical techniques have been required to locate the set. By simulating the model of a multilevel DC/DC converter that operates in the regime of high feedback gain, the paper illustrates how pulse-width modulated control can...

  6. Analysis and design of PPFHB bidirectional DC-DC converter with coupled inductors

    DEFF Research Database (Denmark)

    Zhang, Zhe; Thomsen, Ole Cornelius; Andersen, Michael Andreas E.

    2009-01-01

    In this paper, a novel push-pull-forward half-bridge (PPFHB) bi-directional DC-DC converter with coupled inductors is proposed. All switches can operate under zero-voltage-switching (ZVS). The operation principle with phase-shift modulation scheme, characteristics of coupled inductors, the steady...

  7. A VHF Class E DC-DC Converter with Self-Oscillating Gate Driver

    DEFF Research Database (Denmark)

    Andersen, Toke Meyer; Christensen, Søren K.; Knott, Arnold

    2011-01-01

    This paper describes the analysis and design of a DC-DC converter topology which is operational at frequencies in the Very High Frequency (VHF) band ranging from 30 MHz − 300 MHz. The presented topology, which consists of a class E inverter, class E rectifier, and self-oscillating gate driver, is...

  8. A New Sliding Mode Controller for DC/DC Converters in Photovoltaic Systems

    Directory of Open Access Journals (Sweden)

    M. Sarvi

    2013-01-01

    Full Text Available DC/DC converters are widely used in many industrial and electrical systems. As DC/DC converters are nonlinear and time-variant systems, the application of linear control techniques for the control of these converters is not suitable. In this paper, a new sliding mode controller is proposed as the indirect control method and compared to a simple direct control method in order to control a buck converter in photovoltaic applications. The solar arrays are dependent power sources with nonlinear voltage-current characteristics under different environmental conditions (insolation and temperature. From this point of view, the DC/DC converter is particularly suitable for the application of the sliding mode control in photovoltaic application, because of its controllable states. Simulations are performed in Matlab/Simulink software. The simulation results are presented for a step change in reference voltage and input voltage as well as step load variations. The simulations results of proposed method are compared with the conventional PID controller. The results show the good performance of the proposed sliding mode controller. The proposed method can be used for the other DC/DC converter.

  9. Interleaved Self-Oscillating Class E Derived Resonant DC/DC Converters

    DEFF Research Database (Denmark)

    Kovacevic, Milovan; Knott, Arnold; Andersen, Michael A. E.

    2012-01-01

    A new method for achieving self-oscillating, self-interleaved operation of class E derived resonant DC/DC converters is presented. The proposed method is suitable for operation at frequencies in the Very High Frequency (VHF) band. Interleaved and self-oscillating modes of operation are achieved...

  10. Integrated S-band transmitter with on-chip DC-DC converter and control loop

    NARCIS (Netherlands)

    Brouzes, H.; Geurts, S.; Besselink, M.; Telli, A.; Hek, A.P. de; Bent, G. van der; Vliet, F.E. van

    2012-01-01

    A highly integrated high-power transmitter has been designed in a high breakdown GaAs MMIC technology. The transmitter includes, on top of an S-Band 10 W class-F HPA, a DC/DC converter and its associated gate driver, the full voltage regulation control loop, which provides a significant step for pha

  11. Y-Source Boost DC/DC Converter for Distributed Generation

    DEFF Research Database (Denmark)

    Siwakoti, Yam P.; Loh, Poh Chiang; Blaabjerg, Frede

    2015-01-01

    This paper introduces a versatile Y-source boost dc/dc converter intended for distributed power generation, where high gain is often demanded. The proposed converter uses a Y-source impedance network realized with a tightly coupled three-winding inductor for high voltage boosting that is presently...

  12. Regulation of a lightweight high efficiency capacitator diode voltage multiplier dc-dc converter

    Science.gov (United States)

    Harrigill, W. T., Jr.; Myers, I. T.

    1976-01-01

    A method for the regulation of a capacitor diode voltage multiplier dc-dc converter has been developed which has only minor penalties in weight and efficiency. An auxiliary inductor is used, which only handles a fraction of the total power, to control the output voltage through a pulse width modulation method in a buck boost circuit.

  13. Regulation of a lightweight high efficiency capacitor diode voltage multiplier dc-dc converter

    Science.gov (United States)

    Harrigill, W. T., Jr.; Myers, I. T.

    1976-01-01

    A method for the regulation of a capacitor diode voltage multiplier dc-dc converter has been developed which has only minor penalties in weight and efficiency. An auxiliary inductor is used, which only handles a fraction of the total power, to control the output voltage through a pulse width modulation method in a buck boost circuit.

  14. A buck DC-DC controller based on WSAR-ADC%基于 WSAR-ADC的降压型 DC-DC 控制器设计

    Institute of Scientific and Technical Information of China (English)

    田登尧; 冯全源

    2014-01-01

    设计了一种基于加窗逐次逼近寄存器( WSAR)模拟数字转换器( ADC)的降压型DC-DC控制器,这种WSAR-ADC适用于数字电源系统,通过对输入电压进行加窗处理,能有效地降低芯片的复杂度;并利用蚁群算法,对该DC-DC控制器的比例积分微分(PID)参数进行了整定,使得整个系统能够稳定工作。电路使用BCD(Bipolar/CMOS/DMOS)0.5μm工艺,输入电压3.3 V,输出电压1 V,设计最大负载电流2 A,纹波小于9 mV,开关频率500 kHz。经过验证,该降压型DC-DC控制器能满足数字电源的采样需求。%A buck DC-DC controller based on window successive approximation register ( WSAR) and analog-to-digital converter ( ADC) was designed.It is applicable to digital power system.The circuit complexity can be re-duced by adding the window function to process input voltage;and the PID (proportion integration differentiation) parameters setting of the DC-DC controller is completed using the ant colony algorithm, which makes the whole sys-tem work stably.The circuit is implemented under Bipolar/CMOS/DMOS ( BCD) 0.5μm process, the input volt-age is 3.3 V, and the output voltage is 1 V.The designed maximum load current is 2 A, the ripple of output voltage is less than 9 mV.After verification, the switch frequency is 500 kHz.This buck DC-DC controller can meet the demand of digital power sampling.

  15. A suitable model plant for control of the set fuel cell-DC/DC converter

    Energy Technology Data Exchange (ETDEWEB)

    Andujar, J.M.; Segura, F.; Vasallo, M.J. [Departamento de Ingenieria Electronica, Sistemas Informaticos y Automatica, E.P.S. La Rabida, Universidad de Huelva, Ctra. Huelva - Palos de la Frontera, S/N, 21819 La Rabida - Palos de la Frontera Huelva (Spain)

    2008-04-15

    In this work a state and transfer function model of the set made up of a proton exchange membrane (PEM) fuel cell and a DC/DC converter is developed. The set is modelled as a plant controlled by the converter duty cycle. In addition to allow setting the plant operating point at any point of its characteristic curve (two interesting points are maximum efficiency and maximum power points), this approach also allows the connection of the fuel cell to other energy generation and storage devices, given that, as they all usually share a single DC bus, a thorough control of the interconnected devices is required. First, the state and transfer function models of the fuel cell and the converter are obtained. Then, both models are related in order to achieve the fuel cell+DC/DC converter set (plant) model. The results of the theoretical developments are validated by simulation on a real fuel cell model. (author)

  16. Optimization of Shielded PCB Air-Core Toroids for High-Efficiency DC-DC Converters

    CERN Document Server

    Orlandi, S; Buso, S; Michelis, S; Fuentes, C A; Kayal, M; Faccio, F; Spiazzi, G

    2011-01-01

    The paper describes the design of optimized printed circuit board (PCB) air-core toroids for high-frequency dc-dc converters with strict requirements in terms of volume and noise. The effect of several design parameters on the overall inductor volume, on dc and ac winding resistance, and on the radiated noise will be investigated. PCB toroids are compared to standard air-core solenoids and other state-of-the-art air-core toroids both theoretically and experimentally: at first, using ANSOFT Maxwell and ANSOFT Q3D simulation tools, and subsequently, with laboratory measurements (irradiated noise, efficiency, and frequency response) on several prototypes. These very flexible and rather easy to manufacture inductors appear very attractive for compact high-frequency dc-dc converters where high efficiency, low volume, and low noise are of primary concern.

  17. Topologies Research of High Voltage and High Power DC/DC Converters Used in DC Grids%用于直流电网的高压大容量DC/DC变换器拓扑研究

    Institute of Scientific and Technical Information of China (English)

    魏晓光; 王新颖; 高冲; 张升

    2014-01-01

    随着世界范围内大力发展直流电网,作为直流电网中关键器件之一的高压大容量 DC/DC 变换器的研究尤为重要。针对目前关于DC/DC变换器研究主要集中于中低压小功率场合的现状,该文首先从多个角度对直流电网用的高压大容量DC/DC变换器进行了需求分析;其次,对现有文献中提出的适用于直流电网的 DC/DC 变换器拓扑进行了研究,并将输入端串联输出端串联(input-series output-series, ISOS)结构和低压 DC/DC 变换器相结合,提出了用于直流电网中输入端和输出端均为高电压场合的 ISOS 型 DC/DC变换器。比较分析了不同拓扑变换器的电压变比、开关器件的电气应力和故障处理能力等,为选择合适的高压大容量DC/DC变换器拓扑提供了依据。%ABSTRACT:As DC/DC converter is one of the most critical components in DC grids, the study of high voltage and high power DC/DC converter is increasingly important with the rapid development of DC grid all over the world. However, the study of DC/DC converter is mostly focused on low or middle voltage and low power applications. In this paper, the requirements of DC/DC Converters used in large DC grids are addressed firstly. And then possible DC/DC converter topologies are reviewed and input-series and output series DC/DC converter is proposed. Finally, in order to provide a basis for selecting suitable high voltage and high power converters in DC grids, the voltage stresses, voltage conversion ratios and fault management ability of different converters topologies are analyzed.

  18. Research borehole drilling activity for boreholes DH-18, DH-19, DC-12, DC-13, DC-14, DC-15, and deepening of existing borehole DC-7

    Energy Technology Data Exchange (ETDEWEB)

    1979-09-01

    This report is an environmental evaluation of the impacts of proposed borehole drilling activities at the Hanford Site, northwest of Richland, Washington. The proposed action is to drill six research boreholes ranging in depth from 137 to 1372 meters (m) (250 to 4500 +- feet (ft)). In addition, an existing borehole (DC-7) will be extended from 1249 to 1524 m (4099 to 5000 +- ft). The purpose of the US Department of Energy's (DOE) borehole drilling activities is to collect data on in situ rock formations that are considered potentialy suitable for nuclear waste repositories. The technical program efforts necessary to identify and qualify specific underground waste facility sites in candidate rock formations include geologic and hydrologic studies (seismicity and tectonics, rock structure and stratigraphy, lithology, etc.). Borehole drilling is an integral part of the geological studies and is essential to a thorough understanding of potentially suitable geologic formations. The purpose of the proposed drilling activities is to obtain data for evaluating Columbia River basalts that are being evaluated by the National Waste Terminal Storage (NWTS) Program to determine their suitability potential for nuclear waste repositories. Unavoidable impact to the environment is limited primarily to the clearing of land needed for access and drilling operations. Considerations exercised during site preparation, drilling, and subsequent site restoration will limit modification of the natural environment to the minimum required for accomplishment of test objectives.

  19. DC Conductivity of Magnetised Holographic Matter

    CERN Document Server

    Donos, Aristomenis; Griffin, Tom; Melgar, Luis

    2015-01-01

    We consider general black hole solutions of Einstein-Maxwell-scalar theory that are holographically dual to conformal field theories at finite charge density with non-vanishing magnetic fields and local magnetisation currents, which generically break translation invariance explicitly. We show that the thermoelectric DC conductivity of the field theory can be obtained by solving a system of generalised Stokes equations on the black hole horizon. For various examples, including Q-lattices and one-dimensional lattices, we solve the Stokes equations explicitly and obtain expressions for the DC conductivity in terms of the solution at the black hole horizon.

  20. Start-stop and recuperation: DC/DC current inverters with integrated double-layer condensers; Start-Stopp und Rekuperation: DC/DC-Wandler mit integrierten Doppelschichtkondensatoren

    Energy Technology Data Exchange (ETDEWEB)

    Igel, Juergen; Ollhaeuser, Helmut; Jeuck, Marc; Apfelbacher, Thomas [Alcoa/AFL Europe GmbH, Frickenhausen (Germany)

    2008-09-15

    Start-stop systems may be made more efficient, and energy recovery in regenerative brakes may be made more economical. The contribution describes a new DC/DC current inverter with integrated double-layer condensers developed by the electric/electronics department of Alcoa. The so-called Energy Conversion Module (ECM) will result in considerable fuel savings and also help to stabilize board grids which are nearing their limits because of the increasing number of electrified service aggregates. Motor car producers are currently testing the module. (orig.)

  1. Hierarchical Control for Multiple DC Microgrids Clusters

    DEFF Research Database (Denmark)

    Shafiee, Qobad; Dragicevic, Tomislav; Vasquez, Juan Carlos;

    2014-01-01

    This paper presents a distributed hierarchical control framework to ensure reliable operation of dc Microgrid (MG) clusters. In this hierarchy, primary control is used to regulate the common bus voltage inside each MG locally. An adaptive droop method is proposed for this level which determines....... Another distributed policy is employed then to regulate the power flow among the MGs according to their local SOCs. The proposed distributed controllers on each MG communicate with only the neighbor MGs through a communication infrastructure. Finally, the small signal model is expanded for dc MG clusters...

  2. Thermoelectric DC conductivities from black hole horizons

    CERN Document Server

    Donos, Aristomenis

    2014-01-01

    An analytic expression for the DC electrical conductivity in terms of black hole horizon data was recently obtained for a class of holographic black holes exhibiting momentum dissipation. We generalise this result to obtain analogous expressions for the DC thermoelectric and thermal conductivities. We illustrate our results using some holographic Q-lattice black holes as well as for some black holes with linear massless axions, in both $D=4$ and $D=5$ bulk spacetime dimensions, which include both spatially isotropic and anisotropic examples. We show that some recently constructed ground states of holographic Q-lattices, which can be either electrically insulating or metallic, are all thermal insulators.

  3. DC Characterization of the Coaxial Superconducting Cable

    Science.gov (United States)

    Šouc, J.; Gömöry, F.; Vojenčiak, M.; Frolek, L.; Isfort, D.; Ehrenberg, J.; Bock, J.

    2008-01-01

    Coaxial cable model with superconducting core and superconducting shield conductor was constructed and tested in DC regime. While the core was already examined in our previous works, in this contribution the detailed study of the superconducting shield conductor in DC conditions is presented. It consists of 16 ReBCO coated tapes with critical current 35 A each connected in parallel. Using shunts with known values placed in series the currents in individual tapes were possible to measure. Distribution of the total cable current into the individual tapes was monitored and its influence on critical current of the cable is discussed.

  4. Three phase full wave dc motor decoder

    Science.gov (United States)

    Studer, P. A. (Inventor)

    1977-01-01

    A three phase decoder for dc motors is disclosed which employs an extremely simple six transistor circuit to derive six properly phased output signals for fullwave operation of dc motors. Six decoding transistors are coupled at their base-emitter junctions across a resistor network arranged in a delta configuration. Each point of the delta configuration is coupled to one of three position sensors which sense the rotational position of the motor. A second embodiment of the invention is disclosed in which photo-optical isolators are used in place of the decoding transistors.

  5. DC Motor Drive with PFC Rectifier

    Directory of Open Access Journals (Sweden)

    Lascu Mihaela

    2008-05-01

    Full Text Available The goal of this work is to study theperformances of a hybrid controller used to controlDC Motor drive with a single-phase power factorcorrection rectifier. This study is made usingcomputer simulation (Simulink. The first part isdevoted to the control system of the DC Motors. Inthe second part, the design of the hybrid controllerwill be presented. The third part is the design ofthe fast response single-phase boost power factorcorrection rectifier. The last parts are devoted tosimulation and experimental results.

  6. Voltage control of DC islanded microgrids

    DEFF Research Database (Denmark)

    Tucci, Michele; Riverso, Stefano; Quintero, Juan Carlos Vasquez

    2015-01-01

    We propose a new decentralized control scheme for DC Islanded microGrids (ImGs) composed by several Distributed Generation Units (DGUs) with a general interconnection topology. Each local controller regulates to a reference value the voltage of the Point of Common Coupling (PCC) of the correspond......We propose a new decentralized control scheme for DC Islanded microGrids (ImGs) composed by several Distributed Generation Units (DGUs) with a general interconnection topology. Each local controller regulates to a reference value the voltage of the Point of Common Coupling (PCC...

  7. "DC:0-3" to "DC:0-3R" to "DC:0-5": A New Edition

    Science.gov (United States)

    Zeanah, Charles H., Jr.; Carter, Alice; Cohen, Julie; Egger, Helen; Keren, Miri; Gleason, Mary Margaret; Lieberman, Alicia F.; Mulrooney, Kathleen; Oser, Cindy

    2015-01-01

    Originally published in 1994 by ZERO TO THREE as the "Diagnostic Classification of Mental Health and Developmental Disorders of Infancy and Early Childhood" ("DC:0-3") and revised in 2005 by ZERO TO THREE as the "Diagnostic Classification of Mental Health and Developmental Disorders of Infancy and Early Childhood, Revised…

  8. Stability analysis of a high-step-Up DC grid-connected two-stage boost DC-DC converter

    Directory of Open Access Journals (Sweden)

    El Aroudi A.

    2014-01-01

    Full Text Available High conversion ratio switching converters are used whenever there is a need to step-up dc source voltage level to a much higher output dc voltage level such as in photovoltaic systems, telecommunications and in some medical applications. A simple solution for achieving this high conversion ratio is by cascading different stages of dc-dc boost converters. The individual converters in such a cascaded system are usually designed separately applying classical design criteria. However these criteria may not be applicable for the complete cascaded system . This paper first presents a glimpse on the bifurcation behavior that a cascade connection of two boost converters can exhibit. It is shown that the desired periodic orbit can undergo period doubling leading to subharmonic oscillations and chaotic regimes. Then, in order to simplify the analysis the second stage is considered as constant current sink and design-oriented analysis is carried out to obtain stability boundaries in the parameter space by taking into account slope interactions between the state variables in the two-different stages.

  9. Homopolar dc motor and trapped flux brushless dc motor using high temperature superconductor materials

    Science.gov (United States)

    Crapo, Alan D.; Lloyd, Jerry D.

    1991-03-01

    Two motors have been designed and built for use with high-temperature superconductor (HTSC) materials. They are a homopolar dc motor that uses HTSC field windings and a brushless dc motor that uses bulk HTSC materials to trap flux in steel rotor poles. The HTSC field windings of the homopolar dc motor are designed to operate at 1000 A/sq cm in a 0.010-T field. In order to maximize torque in the homopolar dc motor, an iron magnetic circuit with small air gaps gives maximum flux for minimum Ampere turns in the field. A copper field winding version of the homopolar dc motor has been tested while waiting for 575 A turn HTSC coils. The trapped flux brushless dc motor has been built and is ready to test melt textured bulk HTSC rings that are currently being prepared. The stator of the trapped flux motor will impress a magnetic field in the steel rotor poles with warm HTSC bulk rings. The rings are then cooled to 77 K to trap the flux in the rotor. The motor can then operate as a brushless dc motor.

  10. Effect of DC Link Control Strategies on Multiterminal AC-DC Power Flow

    Directory of Open Access Journals (Sweden)

    Shagufta Khan

    2015-01-01

    Full Text Available For power-flow solution of power systems incorporating multiterminal DC (MTDC network(s, five quantities are required to be solved per converter. On the other hand, only three independent equations comprising two basic converter equations and one DC network equation exist per converter. Thus, for solution, two additional equations are required. These two equations are derived from the control specifications adopted for the DC links. Depending on the application, several combinations of valid control specifications are possible. Each combination of a set of valid control specifications is known as a control strategy. The number of control strategies increases with an increase in the number of the DC terminals or converters. It is observed that the power-flow convergence of integrated AC-MTDC power systems is strongly affected by the control strategy adopted for the DC links. This work investigates the mechanism by which different control strategies affect the power-flow convergence pattern of AC-MTDC power systems. To solve the DC variables in the Newton-Raphson (NR power-flow model, sequential method is considered in this paper. Numerous case studies carried out on a three-terminal DC network incorporated in the IEEE-300 bus test system validate this.

  11. 75 FR 47199 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-9-10 Series Airplanes, DC-9-30...

    Science.gov (United States)

    2010-08-05

    ... Douglas Corporation Model DC- 9-10 Series Airplanes, DC-9-30 Series Airplanes, DC-9-81 (MD-81) Airplanes, DC-9-82 (MD-82) Airplanes, DC-9-83 (MD-83) Airplanes, DC-9- 87 (MD-87) Airplanes, MD-88 Airplanes... directive (AD), which applies to all McDonnell Douglas Model DC-9-10 series airplanes, DC-9-30...

  12. Comparison of solar panel cooling system by using dc brushless fan and dc water

    Science.gov (United States)

    Irwan, Y. M.; Leow, W. Z.; Irwanto, M.; M, Fareq; Hassan, S. I. S.; Safwati, I.; Amelia, A. R.

    2015-06-01

    The purpose of this article is to discuss comparison of solar panel cooling system by using DC brushless fan and DC water pump. Solar photovoltaic (PV) power generation is an interesting technique to reduce non-renewable energy consumption and as a renewable energy. The temperature of PV modules increases when it absorbs solar radiation, causing a decrease in efficiency. A solar cooling system is design, construct and experimentally researched within this work. To make an effort to cool the PV module, Direct Current (DC) brushless fan and DC water pump with inlet/outlet manifold are designed for constant air movement and water flow circulation at the back side and front side of PV module representatively. Temperature sensors were installed on the PV module to detect temperature of PV. PIC microcontroller was used to control the DC brushless fan and water pump for switch ON or OFF depend on the temperature of PV module automatically. The performance with and without cooling system are shown in this experiment. The PV module with DC water pump cooling system increase 3.52%, 36.27%, 38.98%in term of output voltage, output current, output power respectively. It decrease 6.36 °C compare than to PV module without DC water pump cooling system. While DC brushless fan cooling system increase 3.47%, 29.55%, 32.23%in term of output voltage, output current, and output power respectively. It decrease 6.1 °C compare than to PV module without DC brushless fan cooling system. The efficiency of PV module with cooling system was increasing compared to PV module without cooling system; this is because the ambient temperature dropped significantly. The higher efficiency of PV cell, the payback period of the system can be shorted and the lifespan of PV module can also be longer.

  13. Patrones de sucesión vegetal sobre los depósitos de material residual en minas de gravas - Santa Fe de Bogotá Plant succession patterns on residual open-pit gravel mines deposits Bogota

    Directory of Open Access Journals (Sweden)

    Mora Goyes Ricardo A.

    1999-11-01

    Full Text Available Con Base en el estudio de la composicion y estructura de las comunidades vegetales y el analisis de las caracteristicas fisicoquimicas de los desechos, se determinaron los patrones iniciales de sucesion primaria, presentes en tres depositos de material residual de 18, 36, 120 meses de abandono, provenientes de la explotacion minera de gravas a cielo abierto al sur de Santafe de Bogota. La composicion, riqueza y diversidad floristica fueron maximas a los 36 meses de abandono del deposito. La dominancia alcanzo los maximos valores en el deposito de 120 meses. Los dos primeros parches de vegetacion presentaron un mejor ajuste al modelo de distribucion especie-abundancia logaritmico, y el tercero a un normal logaritimico. El azar es el patron de distribucion espacial-horizontal que mas abunda entre todas las especies,. seguido por patrones de micro y macroheterogeneidad. Las formas de crecimiento dominantes pasan de hierbas acaulirrosulas y postradas, en la comunidad pionera, a hierbas rastreras y arbustos, en el parche de 120 meses de edad. Las estrategias de historias de vida y las relaciones intraespecificas propuestas por Grime (1989, permitieron determinar que las plantas en la colonizacion de los primeros ambientes, se comportan como ruderales tolerantes a restricciones, y hacia el final del periodo sucesionall, como competidoras tolerantes a restricciones. Los modelos establecidos por Connell y Slatyer (1977 y Noble y Slatyer (1980, y los mecanimos de sucesion vegetal: arribo, establecimiento, facilitacion, tolerancia, inhibicion, extincion y maximo dominio, explican claramente los patrones de sucesion vegetal establecidos a traves de la dinamica de colonizacion y establecimiento de las especies vegetales sobre estos depositos. Cambios a traves del tiempo en la disponibilidad de condiciones y recursos en los sustratos expuestos a la colonizacion vegetal, medidos a partir de la caracterizacion de N, P, K, Ca, Na, Mg, porcentaje de arcillas

  14. DC-Link Compensation Method for Slim DC Link Drives Fed by Soft Grid

    DEFF Research Database (Denmark)

    Mathe, Laszlo; Rosendahl Andersen, Henrik; Lazar, Radu

    2010-01-01

    harmonic distortion (PWHD) of the line current are degraded, if resonance between the line impedance and the DC-link capacitance occurs. Likewise, the motor performance is affected negatively giving extra torque ripple, vibration and acoustic-noise emission. This paper proposes a novel DC-link compensation...... method, which ensures the stability of the slim DC-link on a soft grid. The proposed compensation method may be used for open- and closedloop control schemes, requiring a small overhead in the digital implementation....

  15. Modeling and Analysis of Transformerless High Gain Buck-boost DC-DC Converters

    Directory of Open Access Journals (Sweden)

    Vu Tran

    2014-12-01

    Full Text Available This paper proposes a transfomerless switched capacitor buck boost converter model, which provides higher voltage gain and higher efficiency when compared to the conventional buck boost converter. The averaged model based on state-space description is analyzed in the paper. The simulation results are presented to confirm the capability of the converter to generate high voltage ratios. The comparison between the proposed model and the traditional model is also provided to reveal the improvement. The proposed converter is suitable for for a wide application which requires high step-up DC-DC converters such as DC micro-grids and solar electrical energy.

  16. Hierarchical Control for Multiple DC-Microgrids Clusters

    DEFF Research Database (Denmark)

    Shafiee, Qobad; Dragicevic, Tomislav; Vasquez, Juan Carlos

    2014-01-01

    DC microgrids (MGs) have gained research interest during the recent years because of many potential advantages as compared to the ac system. To ensure reliable operation of a low-voltage dc MG as well as its intelligent operation with the other DC MGs, a hierarchical control is proposed in this p......DC microgrids (MGs) have gained research interest during the recent years because of many potential advantages as compared to the ac system. To ensure reliable operation of a low-voltage dc MG as well as its intelligent operation with the other DC MGs, a hierarchical control is proposed...

  17. Power Quality in DC Power Distribution Systems and Microgrids

    Directory of Open Access Journals (Sweden)

    Stephen Whaite

    2015-05-01

    Full Text Available This review paper discusses power quality considerations for direct current (DC electric power distribution systems, particularly DC microgrids. First, four selected sample DC architectures are discussed to provide motivation for the consideration of power quality in DC systems. Second, a brief overview of power quality challenges in conventional alternating current (AC distribution systems is given to establish the field of power quality. Finally, a survey of literature addressing power quality issues in DC systems is presented, and necessary power quality considerations in DC distribution system design and operation are discussed.

  18. Electrical Anomalies Observed During DC3

    Science.gov (United States)

    Lang, Timothy J.; Rutledge, Steven A.; Dolan, Brenda; Krehbiel, Paul; Rison, William; Lindsey, Daniel T.; Lyons, Walt

    2013-01-01

    The primary scientific goals of DC3 involved improving our understanding of the chemical impacts of thunderstorms and their anvils. However, the Colorado domain provided opportunities to study other interesting phenomena, including the potential impacts of smoke ingestion on convection and thunderstorms, electrification processes in smoke plumes and pyrocumulonimbus clouds, and the production of sprites by unconventional thunderstorm.

  19. New Logic Circuit with DC Parametric Excitation

    Science.gov (United States)

    Sugahara, Masanori; Kaneda, Hisayoshi

    1982-12-01

    It is shown that dc parametric excitation is possible in a circuit named JUDO, which is composed of two resistively-connected Josephson junctions. Simulation study proves that the circuit has large gain and properties suitable for the construction of small, high-speed logic circuits.

  20. Review on Control of DC Microgrids

    DEFF Research Database (Denmark)

    Meng, Lexuan; Shafiee, Qobad; Ferrari-Trecate, Giancarlo

    2017-01-01

    This paper performs an extensive review on control schemes and architectures applied to DC microgrids. It covers multi-layer hierarchical control schemes, coordinated control strategies, plug-and-play operations, stability and active damping aspects as well as nonlinear control algorithms. Island...

  1. The LHCb computing data challenge DC06

    Energy Technology Data Exchange (ETDEWEB)

    Nandakumar, R [Science and Technology Facilities Council (United Kingdom); Jimenez, S G [University Rovira i Virgili (Spain); Adinolfi, M [H. H. Wills Physics Laboratory, Bristol (United Kingdom); Bernet, R [Universitat Zurich (Switzerland); Blouw, J [Physikalisches Institut, Heidelberg (Germany); Bortolotti, D; Carbone, A; M' Charek, B [Universita and INFN, Bologna (Italy); Perego, D L [INFN sez. Milano-Bicocca (Italy); Pickford, A [University of Glasgow (United Kingdom); Potterat, C [LPHE-IPEP, Lausanne (Switzerland); Miguelez, M S [Universidad de Santiago de Compostela (Spain); Bargiotti, M; Castellani, G; Charpentier, P; Closier, J [CERN (Switzerland); Brook, N [University of Bristol (United Kingdom); Casajus, A; Diaz, R Graciani [Universitat de Barcelona (Spain); Cioffi, C [University of Oxford (United Kingdom)], E-mail: r.nandakumar@rl.ac.uk (and others)

    2008-07-15

    The worldwide computing grid is essential to the LHC experiments in analysing the data collected by the detectors. Within LHCb, the computing model aims to simulate data at Tier-2 grid sites as well as non-grid resources. The reconstruction, stripping and analysis of the produced LHCb data will pimarily place at the Tier-1 centres. The computing data challenge DC06 started in May 2006 with the primary aims being to exercise the LHCb computing mod and to produce events which will be used for analyses in the forthcoming LHCb physics book. This paper gives an overview of the LHCb computing model and addresses the challenges and experiences during DC06. The management of the production of Monte Carlo data on the LCG was done using the DIRAC worklad management system which in turn uses the WLCG infrastructure and middleware. We shall report on the amount of data simulated during DC06, including the performance of the sites used. The paper will also summarise the experience gained during DC06, in particular he distribution of data to the Ter-1 sits and the access to this data.

  2. FUNCTIONAL CORRELATION OF FP AND DC METHODS

    Directory of Open Access Journals (Sweden)

    Marin Kaluža

    2013-02-01

    Full Text Available Most of organizations today use information-communication technologies (ICT for building an information system (IS. IS is assembled of hardware, software, network resources, organizational and human resources. In IS development process, complexity is crucial for evaluating quantities of resources needed (time, people, money, equipment. Complexity of an IS can be evaluated and/or measured in different phases of development. There are many methods for measuring complexity, but mostly used and thoroughly described method is Function Point Analysis (FP. The opposite method, Database Complexity (DC, does not measure all the aspects of IS, but it could evaluate system complexity depending on the database complexity. DC method is intended to be used for measuring semantic complexity of the IS database, and can be shown by counting attributes A and foreign keys F. This paper describes a very high correlation between FP and DC methods, and defines a function which can in 95% of accuracy express FP values from measured DC values.

  3. A passive DC current sensing methodology

    Science.gov (United States)

    Wang, Dong F.; Liu, Huan; Li, Xiaodong; Li, Yang; Xian, Weikang

    2016-10-01

    This paper proposes a method for passive sensing a two-wire DC current without using any cord separator. In this method, a piezoelectric thin-film cantilever with a micro-magnet on its end is positioned near a power cord. The DC current in the power cord induces a magnetic field, which generates a magnetic force acting on the micro-magnet. Consequently, the piezoelectric cantilever is bent and induces an output voltage that is sensitive to small variations of DC currents. A prototype device has been fabricated and experimentally studied. It was found that the initial peak amplitude of the piezoelectric output voltage increases linearly with the DC current value upon "ON-OFF" switching. Compared to the Hall-effect based sensing, this method has the advantages of no need of driving voltage or cord separators even for two-wire appliance cords. Apart from the conventional consumer electronics, this method may have a wide application foreground in the new emerging fields, such as energy vehicles, lithium ion battery, or smart power grid.

  4. The DC06 Outer Tracker Simulation

    CERN Document Server

    Amoraal, J

    2008-01-01

    This note gives an overview of the Outer Tracker simulation for the 2006 Data Challenge (DC06). It covers the Outer Tracker detector description used in Gauss/Geant to simulate hits in the Outer Tracker and the digitisation of the hits in Boole. It concludes with the expected performance of the Outer Tracker.

  5. A SQUID series array dc current sensor

    Energy Technology Data Exchange (ETDEWEB)

    Beyer, J; Drung, D [Physikalisch-Technische Bundesanstalt (PTB), Abbestrasse 2-12, D-10587 Berlin (Germany)], E-mail: joern.beyer@ptb.de, E-mail: dietmar.drung@ptb.de

    2008-09-15

    Superconducting quantum interference device (SQUID) sensors are used to sense changes in various physical quantities, which can be transformed into changes in the magnetic flux threading the SQUID loop. We have developed a novel SQUID array dc current sensor. The device is based on a series array of identical dc SQUIDs. An input signal current to be measured is coupled tightly but non-uniformly to the SQUID array elements. The input signal coupling to the individual array elements is chosen such that a single-valued, non-periodic overall voltage response is obtained. Flux offsets in the individual SQUIDs which would compromise the sensor voltage response are avoided or can be compensated. We present simulations and experimental results on the SQUID Array for Dc (SQUAD) current sensor current sensor performance. A dc current resolution of <1 nA in a measurement bandwidth of 0-25 Hz is achieved for an input inductance of L{sub In}<3 nH.

  6. 49 CFR 372.219 - Washington, DC

    Science.gov (United States)

    2010-10-01

    ... and is comprised of all points as follows: (a) The municipality of Washington, D.C., itself; (b) All... Manassas, VA, and the City of Manassas Park, VA. (d) All of any municipality any part of which is within... municipality wholly surrounded, or so surrounded except for a water boundary, by the municipality of...

  7. Space charge fields in DC cables

    DEFF Research Database (Denmark)

    McAllister, Iain Wilson; Crichton, George C; Pedersen, Aage

    1996-01-01

    The space charge that accumulates in DC cables can, mathematically, be resolved into two components. One is related to the temperature and the other to the magnitude of the electric field strength. Analytical expressions for the electric fields arising from each of these space charge components a...

  8. Gravity Compensation Technique Uses Small dc Motor

    Science.gov (United States)

    Hollow, Richard

    1988-01-01

    Small dc servomotor powered by simple constant-current source and with suitable gearing used to cancel effect of gravity upon load. Lead-screw positioning system has load counterbalanced by small supplementary motor powered by constant current source. Motor lighter and more compact alternative to counterbalance. Used in variety of mechanical systems where load positioned or accelerated in vertical plane.

  9. Characterization of Lipschitz continuous DC functions

    CERN Document Server

    Hantoute, A

    2012-01-01

    We give a necessary and sufficient condition for a difference of convex (DC, for short) functions, defined on a locally convex space, to be Lipschitz continuous. Our criterion relies on the intersections of the "epsilon-subdifferentials of the involved functions.

  10. Design and Analysis of Typical DC-DC Transform Circuit%典型DC-DC变换电路设计与分析

    Institute of Scientific and Technical Information of China (English)

    曹翊

    2011-01-01

    In this paper,the principle and classification of DC-DC transform circuit was introduced.Besides,the principle,the composition and the change of the voltage of the three kinds of typical DC-DC transform circuit which are called buck circuit,boost circuit%本文介绍了DC-DC变换电路原理及分类;讨论了三种典型DC-DC变换电路即Buck电路、Boost电路和Buck-Boost电路的原理、结构、电压变换关系,并在Matlab软件建立仿真模型验证了理论分析的正确性;比较了这三种典型DC-DC变换电路的优缺点。

  11. Ultra-high Efficiency DC-DC Converter using GaN Devices

    DEFF Research Database (Denmark)

    Ramachandran, Rakesh

    2016-01-01

    with the PCB layout and the magnetics. This thesis mainly covers the design and implementation of various high efficiency isolated dcdc converters in the range of 1 to 2.5 kW of output power. Both hard-switched and soft-switched topologies in isolated dc-dc converters has been studied and realized......The demands for high efficiency dc-dc power converters are increasing day by day in various applications such as telecommunication, data-centers, electric vehicles and various renewable energy systems. Silicon (Si) has been used as the semiconductor material in majority of the power devices...... for many decades. However, the rate of improvement slowed as the silicon power materials asymptotically approached its theoretical bounds. Compared to Si, wideband gap materials such as Silicon Carbide (SiC) and Gallium Nitride (GaN) are promising semiconductors for power devices due to their superior...

  12. 5 kW DC/DC converter for hydrogen generation from photovoltaic sources

    Energy Technology Data Exchange (ETDEWEB)

    Garrigos, A.; Blanes, J.M.; Carrasco, J.A.; Lizan, J.L. [Area de Tecnologia Electronica, Universidad Miguel Hernandez de Elche, Avda. de la Universidad s/n, 03202 Elche, Alicante (Spain); Beneito, R. [AIJU, Avda. de la Industria 23, 03440 Ibi, Alicante (Spain); Molina, J.A. [Grupo SITEC, Calle Cadiz 38, Poligono Industrial L' Alfac III, 03440 Ibi, Alicante (Spain)

    2010-06-15

    This paper covers the design of a DC-DC power converter aimed for hydrogen production from photovoltaic sources. Power conditioning for such application is usually driven by different constraints: high step-down conversion ratio is required if the input voltage of such equipment has to be compatible with photovoltaic sources that are connected to grid-connected inverters; galvanic isolation; high efficiency and low mass. Taking into account those factors, this work proposes a push-pull DC/DC converter for power levels up to 5 kW. The operation and features of the converter are presented and analyzed. Design guidelines are suggested and experimental validation is also given. (author)

  13. Analysis of the Coupling Behavior of PEM Fuel Cells and DC-DC Converters

    Directory of Open Access Journals (Sweden)

    Achim Kienle

    2009-03-01

    Full Text Available The connection between PEM fuel cells and common DC-DC converters is examined. The analysis is model-based and done for boost, buck and buck-boost converters. In a first step, the effect of the converter ripples upon the PEM fuel cell is shown. They introduce oscillations in the fuel cell. Their appearance is explained, discussed and possibilities for their suppression are given. After that, the overall behaviors of the coupled fuel cell-converter systems are analyzed. It is shown, that neither stationary multiplicities nor oscillations can be introduced by the couplings and therefore separate control approaches for both the PEMFC and the DC-DC converters are applicable.

  14. Embedded Controlled Isolated Bidirectional Full-Bridge DC-DC Converter with Flyback Snubber

    Directory of Open Access Journals (Sweden)

    D. Kirubakaran

    2012-01-01

    Full Text Available An isolated bidirectional full-bridge DC-DC converter with flyback snubber for supplying a resistive load is simulated and experimentally verified. The DC-DC converter for high conversion ratio, high output power, and soft start-up capability is presented in this paper. The circuit consists of a capacitor, a diode, and a flyback converter. These components help to clamp the voltage spikes caused by the current difference between the current fed inductor and leakage inductance of the isolation transformer. The switches are operated by soft-switching technology. The suppression of inrush current which is usually found in the boost mode start-up transition is presented here. The simulated and experimental results for output voltage, output current, and power for both buck and boost modes are presented.

  15. Analysis of the coupling behavior of PEM fuel cells and DC-DC converters

    Energy Technology Data Exchange (ETDEWEB)

    Groetsch, M.; Mangold, M.; Kienle, A. [Max Planck Institute for Dynamics of Complex Technical Systems, Process Synthesis and Process Dynamics Group, Sandtorstrasse 1, 39106 Magdeburg (Germany); Kienle, A. [Otto-von-Guericke-Universitaet Magdeburg, Lehrstuhl fuer Automatisierungstechnik / Modellbildung, Universitaetsplatz 2, 39106 Magdeburg (Germany)

    2009-07-01

    The connection between PEM fuel cells and common DC-DC converters is examined. The analysis is model-based and done for boost, buck and buck-boost converters. In a first step, the effect of the converter ripples upon the PEM fuel cell is shown. They introduce oscillations in the fuel cell. Their appearance is explained, discussed and possibilities for their suppression are given. After that, the overall behaviors of the coupled fuel cell-converter systems are analyzed. It is shown, that neither stationary multiplicities nor oscillations can be introduced by the couplings and therefore separate control approaches for both the PEMFC and the DC-DC converters are applicable. (author)

  16. DC-DC buck converters for the CMS Tracker upgrade at SLHC

    Energy Technology Data Exchange (ETDEWEB)

    Feld, L; Jussen, R; Karpinski, W; Klein, K; Sammet, J, E-mail: Katja.Klein@cern.ch [1. Physikalisches Institut B, RWTH Aachen University, Sommerfeldstrasse 14, 52074 Aachen (Germany)

    2011-01-15

    The CMS experiment at the Large Hadron Collider (LHC) at CERN, Geneva, is planning major upgrades of its current pixel and strip detectors for the LHC luminosity upgrade, known as the SLHC. Due to the larger channel count and - in case of the strip tracker - increased functionality, the powering scheme adopted today, namely parallel powering of several detector modules, has to be abandoned. Instead, a powering scheme based on the DC-DC conversion technique is foreseen, which would lead to lower power losses in the supply cables, and would allow to reduce the material budget of cables and associated electronic boards in the sensitive detector volume. This paper deals with the development, characterisation and optimisation of DC-DC buck converter prototypes for the upgrades of the CMS pixel and strip detectors at the SLHC.

  17. Development of DC-DC converters for the upgrade of the CMS pixel detector

    Energy Technology Data Exchange (ETDEWEB)

    Feld, Lutz; Karpinski, Waclaw; Klein, Katja; Sammet, Jan; Wlochal, Michael [RWTH Aachen University (Germany)

    2012-07-01

    Around 2017, the pixel detector of the CMS experiment at LHC will be upgraded. The amount of current that has to be provided to the front-end electronics is expected to increase by a factor of two. Since the space available for cables is limited, this would imply unacceptable power losses in the available supply cables. Therefore it is foreseen to place DC-DC converters close to the front-end electronics, allowing to provide the power at higher voltages and thereby to facilitate the supply of the required currents with the present cable plant. The talk introduces the foreseen powering scheme of the pixel upgrade and summarizes the results of system test measurements with CMS pixel sensor modules, radiation tolerant DC-DC converters and the full power supply chain of the pixel detector. In addition, measurements of the converter efficiency and performance before, after and during thermal cycling are presented.

  18. Switched capacitor DC-DC converter ASICs for the upgraded LHC trackers

    Energy Technology Data Exchange (ETDEWEB)

    Bochenek, M; Faccio, F; Michelis, S [CERN, CH-1211 Geneve 23 (Switzerland); Dabrowski, W, E-mail: Michal.Bochenek@cern.ch [AGH University of Science and Technology, Faculty of Physics and Applied Computer Science, Al. Mickiewicza 30 30-059 Krakow (Poland)

    2010-12-15

    The High Luminosity Upgrade of the ATLAS Inner Tracker puts demanding requirements on the powering system of the silicon strip detector modules due to 10-fold increase of the channel count compared to the existing SemiConductor Tracker. Therefore, new solutions for the powering scheme must be elaborated. Currently two possible approaches, the serial powering and the parallel powering scheme using the DC-DC conversion technique, are under development. This paper describes two switched capacitor DC-DC converters designed in a 130 nm technology. For the optimized step-down converter, foreseen for the parallel powering scheme, power efficiency of 97% has been achieved, while for the charge pump, designed for the serial powering scheme, power efficiency of 85% has been achieved.

  19. Chaos, bifurcation and intermittent phenomena in DC-DC converters under resonant parametric perturbation

    Science.gov (United States)

    Deivasundari, P.; Geetha, R.; Uma, G.; Murali, K.

    2013-07-01

    DC-DC converters act as a black box to study various bifurcations. In the present study, the influence of external periodic interference signal in the input of DC-DC voltage-mode controlled buck converter has been considered. It is found that the presence of sinusoidal or saw-tooth interference signal whose frequency is comparable with the switching frequency of the converter or its rational multiples manifests as remerging chaotic band attractors (or Feigenbaum trees) and intermittent chaos. However, the presence of sinusoidal interference signal having irrational frequency ratios with the switching frequency of the converter leads to quasi-periodic route to chaos. The study was carried out both theoretically and experimentally.

  20. Novel Full-bridge ZVS DC-DC Converter with an Clamp Diodes

    Science.gov (United States)

    Guangqun, Nan; Xue, Hu

    The two arms of this converter all work at zero-voltage switching condition, that bring many advantages, such as little loss of power, simple control, etc. But these also exists some problems, such as parasitic oscillation on the output rectifier diodes. A novel full-bridge ZVS PWM DC-DC converter which adopts two clamping diodes in the first side of the transformer is proposed to reduce the parasitic oscillation in this paper. In this paper, It heavily analyzes the realization process of their soft-switching and the reason of related issues and solution, we establishes simulation model and simulates using orCAD. Finally,a 5 kW ZVS PWM DC-DC converter Prototype in that TMS320F2812 is the core controlled chip has been set up, and the experiments showed us the validation of the correlative theory.

  1. Switched capacitor DC-DC converter ASICs for the upgraded LHC trackers

    CERN Document Server

    Bochenek, M; Faccio, F; Michelis, S

    2010-01-01

    The High Luminosity Upgrade of the ATLAS Inner Tracker puts demanding requirements on the powering system of the silicon strip detector modules due to 10-fold increase of the channel count compared to the existing SemiConductor Tracker. Therefore, new solutions for the powering scheme must be elaborated. Currently two possible approaches, the serial powering and the parallel powering scheme using the DC-DC conversion technique, are under development. This paper describes two switched capacitor DC-DC converters designed in a 130 nm technology. For the optimized step-down converter, foreseen for the parallel powering scheme, power efficiency of 97% has been achieved, while for the charge pump, designed for the serial powering scheme, power efficiency of 85% has been achieved

  2. Washington DC Metropolitan Area Drug Study Household and Non-Household Populations (DC-MADSH-1991)

    Data.gov (United States)

    U.S. Department of Health & Human Services — The DC Metropolitan Area Drug Study (DCMADS) was conducted in 1991, and included special analyses of homeless and transient populations and of women delivering live...

  3. A Nonlinear Digital Control Solution for a DC/DC Power Converter

    Science.gov (United States)

    Zhu, Minshao

    2002-01-01

    A digital Nonlinear Proportional-Integral-Derivative (NPID) control algorithm was proposed to control a 1-kW, PWM, DC/DC, switching power converter. The NPID methodology is introduced and a practical hardware control solution is obtained. The design of the controller was completed using Matlab (trademark) Simulink, while the hardware-in-the-loop testing was performed using both the dSPACE (trademark) rapid prototyping system, and a stand-alone Texas Instruments (trademark) Digital Signal Processor (DSP)-based system. The final Nonlinear digital control algorithm was implemented and tested using the ED408043-1 Westinghouse DC-DC switching power converter. The NPID test results are discussed and compared to the results of a standard Proportional-Integral (PI) controller.

  4. SUBCONTRACT REPORT: DC-DC Converter for Fuel Cell and Hybrid Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Marlino, Laura D [ORNL; Zhu, Lizhi [Ballard Power Systems/Siemens VDO

    2007-07-01

    The goal of this project is to develop and fabricate a 5kW dc-dc converter with a baseline 14V output capability for fuel cell and hybrid vehicles. The major objectives for this dc-dc converter technology are to meet: Higher efficiency (92%); High coolant temperature,e capability (105 C); High reliability (15 Years/150,000miles); Smaller volume (5L); Lower weight (6kg); and Lower cost ($75/kW). The key technical challenge for these converters is the 105 C coolant temperatures. The power switches and magnetics must be designed to sustain these operating temperatures reliably, without a large cost/mass/volume penalty.

  5. Washington DC Metropolitan Area Drug Study Homeless and Transient Population (DC-MADST-1991)

    Data.gov (United States)

    U.S. Department of Health & Human Services — The DC Metropolitan Area Drug Study (DCMADS) was conducted in 1991, and included special analyses of homeless and transient populations and of women delivering live...

  6. Module DC/DC phase-shift réversible haute fréquence

    OpenAIRE

    Guepratte, Kevin; Stephan, Hervé; Delaine, Johan

    2014-01-01

    Cet article présente les travaux menés sur la réalisation d'un module industriel de conversion DC/DC 42V vers 8V. Ce convertisseur est destiné aux applications aéronautiques militaires, et est amené à se généraliser dans les différentes activités. Ce convertisseur, appelé module DC/DC, fonctionne à une fréquence de découpage comprise entre 1,5MHz et 3MHz. La structure de puissance choisie est un demi-pont capacitif quasi-résonnant à déphasage primaire / secondaire. Le redressement au secondai...

  7. DC-DC power converter research for Orbiter/Station power exchange

    Science.gov (United States)

    Ehsani, M.

    1993-01-01

    This project was to produce innovative DC-DC power converter concepts which are appropriate for the power exchange between the Orbiter and the Space Station Freedom (SSF). The new converters must interface three regulated power buses on SSF, which are at different voltages, with three fuel cell power buses on the Orbiter which can be at different voltages and should be tracked independently. Power exchange is to be bi-directional between the SSF and the Orbiter. The new converters must satisfy the above operational requirements with better weight, volume, efficiency, and reliability than is available from the present conventional technology. Two families of zero current DC-DC converters were developed and successfully adapted to this application. Most of the converters developed are new and are presented.

  8. Cryogenic Evaluation of an Advanced DC/DC Converter Module for Deep Space Applications

    Science.gov (United States)

    Elbuluk, Malik E.; Hammoud, Ahmad; Gerber, Scott S.; Patterson, Richard

    2003-01-01

    DC/DC converters are widely used in power management, conditioning, and control of space power systems. Deep space applications require electronics that withstand cryogenic temperature and meet a stringent radiation tolerance. In this work, the performance of an advanced, radiation-hardened (rad-hard) commercial DC/DC converter module was investigated at cryogenic temperatures. The converter was investigated in terms of its steady state and dynamic operations. The output voltage regulation, efficiency, terminal current ripple characteristics, and output voltage response to load changes were determined in the temperature range of 20 to -140 C. These parameters were obtained at various load levels and at different input voltages. The experimental procedures along with the results obtained on the investigated converter are presented and discussed.

  9. Differential Mode EMI Filter Design for Isolated DC-DC Boost Converter

    DEFF Research Database (Denmark)

    Makda, Ishtiyaq Ahmed; Nymand, Morten

    2014-01-01

    is identified first. The DM noise model is then established and based on the harmonic analysis of the noise source voltage waveform, the complete Differential Mode EMI filter, including the filter resonance damping branch, is designed for a 3kW isolated dc-dc boost converter. The noise model and its theoretical......A Differential Mode EMI filter for a low input voltage high-current isolated dc-dc boost converter is designed and presented in this paper. The primary side Differential Mode noise voltage is low due to the high transformer turn ratio, however, the input current is very high and since the EMI limit...... also does not change for such converters, it requires greatly optimized design approach for the filter including the correct sizing of the filter components. A complete analytical filter design process is carried out such a way that the Differential Mode noise voltage source in the converter...

  10. Design and Implementation of Digital Current Mode Controller for DC-DC Converters

    DEFF Research Database (Denmark)

    Taeed, Fazel

    to be regulated by a closed-loop controller. The Peak Current Mode Control (PCMC) is one of the most promising control methods for dc-dc converters. It has been known for high bandwidth (speed), and inherent current protection. Increasing the controller bandwidth decreases the output filter size and cost. Analog...... a bandwidth of 1/10 of the switching frequency. In the current state-of-the-art, the best reported digital PCMC has crossover frequency of 1/15 of the switching frequency. In this PhD study a novel digital PCMC with negligible delay in the inner current loop has been proposed. The proposed solution has...... are eliminated in current mode control; applying the current mode control in high efficiency dc-dc converters results in much higher controller bandwidth....

  11. High Voltage Coil Current Sensor for DC-DC Converters Employing DDCC

    Directory of Open Access Journals (Sweden)

    M. Drinovsky

    2015-12-01

    Full Text Available Current sensor is an integral part of every switching converter. It is used for over-current protection, regulation and in case of multiphase converters for balancing. A new high voltage current sensor for coil-based current sensing in DC-DC converters is presented. The sensor employs DDCC with high voltage input stage and gain trimming. The circuit has been simulated and implemented in 0.35 um BCD technology as part of a multiphase DC-DC converter where its function has been verified. The circuit is able to sustain common mode voltage on the input up to 40 V, it occupies 0.387*0.345 mm2 and consumes 3.2 mW typically.

  12. Incremental Conductance MPPT Algorithm for PV System Implemented Using DC-DC Buck and Boost Converter

    OpenAIRE

    2014-01-01

    The two basic topologies of switch mode DC-DC converters (Buck and Boost) are analyzed with a view of their use in PV (photovoltaic) systems, as the photovoltaic generator exhibits non-linear characteristics due to the change in environmental condition and load variation. As the efficiency of PV panels is low it becomes mandatory to extract maximum power from the PV panel at a given period of time. Several MPPT algorithms with different types of converters are being proposed f...

  13. Inductor based switching DC-DC converter for low voltage power distribution in SLHC

    CERN Document Server

    Michelis, S; Marchioro, A; Kayal, M; PH-EP

    2007-01-01

    In view of a power distribution scheme compatible with the requirements of the SLHC environment, we are evaluating the feasibility of on-board inductor-based DC-DC step-down conversion. Such converter should be an integrated circuit and capable of operating in harsh radiation environments and in the high magnetic field of the experiments. In this paper we present results concerning the choice of the technology, the search for the magnetic components and the calculations of the expected efficiency.

  14. Linearized stability analysis and design of a flyback dc-dc boost regulator.

    Science.gov (United States)

    Wester, G. W.

    1973-01-01

    Analytic expressions for the small-signal power-stage describing functions of a switched dc-dc boost regulator are derived from an approximate continuous circuit model which is developed by a time-averaging technique. Closed-loop stability is attained through the design of frequency compensation of the loop gain. Open- and closed-loop regulator output impedances are derived from the linearized models for the given configuration. The analysis and design are compared with and confirmed by breadboard measurements.

  15. Tekram DC-390U2W、DC-390U3W

    Institute of Scientific and Technical Information of China (English)

    冷建宏

    2001-01-01

    @@ 建邦科技在SCSI卡产业中,是一家相当具有名气的厂商,曾经开发自己编写最佳化BIOS的DC-395系列产品.而这一次送测的DC-390系列,则是以芯片组供应厂商所提供的参考设计,开发出来的一系列产品.

  16. Efficiency and weight of voltage multiplier type ultra lightweight dc-dc converters

    Science.gov (United States)

    Harrigill, W. T., Jr.; Myers, I. T.

    1975-01-01

    An analytical and experimental study was made of a capacitor-diode voltage multiplier without a transformer which offers the possibility of high efficiency with light weight. The dc-dc conversion efficiencies of about 94 percent were achieved at output powers of 150 watts at 1000 volts using 8x multiplication. A detailed identification of losses was made, including forward drop losses in component, switching losses, reverse junction capacitance charging losses, and charging losses in the main ladder capacitors.

  17. Soft switching bidirectional DC-DC converter for ultracapacitor-batteries interface

    Energy Technology Data Exchange (ETDEWEB)

    Adib, Ehsan; Farzanehfard, Hosein [Dept. of Electrical and Computer Engineering, Isfahan Univ. of Technology (Iran)

    2009-12-15

    In this paper a new soft switching bidirectional DC-DC converter is introduced which can be applied as the interface circuit between ultracapacitors and batteries or fuel cells. All semiconductor devices in the proposed converter are soft switched while the control circuit remains PWM. Due to achieved soft switching condition, the energy conversion through the proposed converter is highly efficient. The proposed converter is analyzed and a prototype converter is implemented. The presented experimental results confirm the theoretical analysis. (author)

  18. Custom DC-DC converters for distributing power in SLHC trackers

    CERN Document Server

    Allongue, B; Blanchot, G; Faccio, F; Fuentes, C; Mattavelli, P; Michelis, S; Orlandis, S; Spiazzi, G

    2008-01-01

    A power distribution scheme based on the use of on-board DC-DC converters is proposed to efficiently distribute power to the on-detector electronics of SLHC trackers. A comparative analysis of different promising converter topologies is presented, leading to the choice of a magneticbased buck converter as a first conversion stage followed by an on-chip switched capacitors converter. An overall efficiency above 80% is estimated for the practical implementation proposed.

  19. High performance dc-dc conversion with voltage multipliers. [using transformerless capacitor diode circuit

    Science.gov (United States)

    Harrigill, W. T., Jr.; Myers, I. T.

    1974-01-01

    An experimental 100W 1000V dc-dc converter using a capacitor diode voltage multipler (CDVM) with a nominal frequency of 100 kHz is studied. A component weight of about 1 kg/kW was obtained. Design equations for current, output -ripple and -power, efficiency and output voltage are derived. Agreement between experimental results and calculations is fairly good except for ripple.

  20. A Three-Phase Bidirectional DC-DC Converter for Automotive Applications

    Energy Technology Data Exchange (ETDEWEB)

    Su, Gui-Jia [ORNL; Tang, Lixin [ORNL

    2008-01-01

    This paper presents a three-phase soft-switching, bidirectional dc-dc converter for high-power automotive applications. The converter employs dual three-phase active bridges and operates with a novel asymmetrical but fixed duty cycle for the top and bottom switches of each phase leg. Simulation and experimental data on a 6-kW prototype are included to verify the novel operating and power flow control principles.

  1. Sliding-mode control of single input multiple output DC-DC converter

    Science.gov (United States)

    Zhang, Libo; Sun, Yihan; Luo, Tiejian; Wan, Qiyang

    2016-10-01

    Various voltage levels are required in the vehicle mounted power system. A conventional solution is to utilize an independent multiple output DC-DC converter whose cost is high and control scheme is complicated. In this paper, we design a novel SIMO DC-DC converter with sliding mode controller. The proposed converter can boost the voltage of a low-voltage input power source to a controllable high-voltage DC bus and middle-voltage output terminals, which endow the converter with characteristics of simple structure, low cost, and convenient control. In addition, the sliding mode control (SMC) technique applied in our converter can enhance the performances of a certain SIMO DC-DC converter topology. The high-voltage DC bus can be regarded as the main power source to the high-voltage facility of the vehicle mounted power system, and the middle-voltage output terminals can supply power to the low-voltage equipment on an automobile. In the respect of control algorithm, it is the first time to propose the SMC-PID (Proportion Integration Differentiation) control algorithm, in which the SMC algorithm is utilized and the PID control is attended to the conventional SMC algorithm. The PID control increases the dynamic ability of the SMC algorithm by establishing the corresponding SMC surface and introducing the attached integral of voltage error, which endow the sliding-control system with excellent dynamic performance. At last, we established the MATLAB/SIMULINK simulation model, tested performance of the system, and built the hardware prototype based on Digital Signal Processor (DSP). Results show that the sliding mode control is able to track a required trajectory, which has robustness against the uncertainties and disturbances.

  2. Reliability-Oriented Design of LC Filter in Buck DC-DC Converter

    DEFF Research Database (Denmark)

    Liu, Yi; Huang, Meng; Wang, Huai;

    2015-01-01

    State-of-the-art LC filter design of buck DC-DC converter is based on the specifications of voltage and current ripples and constrains in power density and cost. Since lifetime is an important performance factor in reliability critical applications, this digest proposes a method to optimize...... an optimized LC filter design to fulfill the required lifetime. The theoretical analysis and simulation study are presented which are verified by the experimental results from a buck converter prototype....

  3. Informational model verification of ZVS Buck quasi-resonant DC-DC converter

    Science.gov (United States)

    Vakovsky, Dimiter; Hinov, Nikolay

    2016-12-01

    The aim of the paper is to create a polymorphic informational model of a ZVS Buck quasi-resonant DC-DC converter for the modeling purposes of the object. For the creation of the model is applied flexible open standards for setting, storing, publishing and exchange of data in distributed information environment. The created model is useful for creation of many and different by type variants with different configuration of the composing elements and different inner model of the examined object.

  4. Distributed maximum power point tracking in photovoltaic applications: active bypass DC/DC converter

    Directory of Open Access Journals (Sweden)

    Carlos Andrés Ramos-Paja

    2012-01-01

    Full Text Available Se propone una estructura de desvío activo para maximizar la producción de potencia en sistemas fotovoltaicos bajo condiciones irregulares de operación, comparando su eficiencia con soluciones individuales y distribuidas basadas en convertidores DC/DC convencionales. Los análisis y simulaciones realistas demuestran las ventajas del nuevo convertidor de desvío activo sobre soluciones basadas en convertidores Boost, Buck y Buck-Boost.

  5. Impedance matching and DC-DC converter designs for tunable radio frequency based mobile telecommunication systems

    OpenAIRE

    Wong, Yan Chiew

    2014-01-01

    Tunability and adaptability for radio frequency (RF) front-ends are highly desirable because they not only enhance functionality and performance but also reduce the circuit size and cost. This thesis presents a number of novel design strategies in DC-DC converters, impedance networks and adaptive algorithms for tunable and adaptable RF based mobile telecommunication systems. Specifically, the studies are divided into three major directions: (a) high voltage switch controller ba...

  6. Analisa Perbandingan Efisiensi Motor Dc Kompon Pendek Dengan Motor Dc Kompon Panjang Akibat Penambahan Kutub

    OpenAIRE

    Sitompul, Fuad Rahim

    2015-01-01

    Motor listrik merupakan perangkat elekromagnetis yang mengubah energi listrik menjadi energi mekanik. Motor DC memerlukan tegangan searah pada kumparan medan untuk diubah menjadi energi mekanik. Energi mekanik ini digunakan sebagai penggerak peralatan listrik seperti pompa,penggerak kipas angin, lift dan lain-lain. Karena penggunaannya yang cukup luas maka kinerjanya harus baik. Kinerja suatu motor DC dikatakan baik jika efisiensi motor tersebut tinggi. Hal itu dapat dicapai dengan mengatur b...

  7. Real-Time Implementation of a Fuzzy Logic Controller for DC-DC Switching Converters

    Science.gov (United States)

    2007-11-02

    537-546, May 1997. [3] H. Sira -Ramirez, “Design of P-I controllers for DC-to-DC power supplies via extended linearization,” Int. J. Control, vol. 51...Technology, vol. 7, pp. 230-237, Mar. 1999. [5] G. Escobar, R. Ortega, H. Sira -Ramirez, J.P. Vilain and I. Zein, “An experimental comparison of several

  8. Usage of a dc-to-dc converter for voltage adaption between energy storage and propulsion system in electric or hybrid vehicles; Einsatz eines DC/DC-Wandlers zur Spannungsanpassung zwischen Antrieb und Energiespeicher in Elektro- und Hybridfahrzeugen

    Energy Technology Data Exchange (ETDEWEB)

    Schoenen, Timo

    2011-07-01

    Every time a new hybrid or electrical vehicle is developed, different topologies are compared to achieve the best results regarding weight costs and efficiency. The integration of a dc-to-dc converter between the battery stack and the power train is a frequently discussed alternative because the preferred voltage of the inverter and machine are often higher than the voltage of the battery stack. Within this thesis this approach was studied in detail and compared with the conventional concept without using a dc-to-dc converter. Therefore the influence of the dc-link voltage on the components like battery stack, machine, inverter and dc-to-dc converter was investigated. A change of the dc-link voltage leads to changes inside the components which affect weight, surface of the semiconductor devices and efficiency. This correlation could be used to develop a simulation process which optimizes the dc-link voltage regarding the programmed targets. In hybrid and electrical vehicles low weight and minimum costs are important and were defined as the main targets to achieve. The vantages which arise by using a dc-to-dc converter can be opposed to the disadvantages which also occur. The additional degree of freedom caused by the dc-to-dc converter shall be used. To achieve the best results regarding efficiency, the dc-link voltage has to be adapted to the operating point of the machine. First of all the dc-to-dc converter is an additional component with its weight, volume and losses. By the increased dc-link voltage on the drive train side, the size of the semiconductor devices inside the inverter could be reduced. Therefore the number of windings inside the machine has to be adapted accordingly. Also the wiring could be decreased based on the reduced currents. Overall there is still a higher weight and volume caused by the dc-to-dc converter. Also the efficiency map is influenced by the dc-to-dc converter. In the base speed region the dc-to-dc converter leads to a higher

  9. Brushless dc motor uses electron beam switching tube as commutator

    Science.gov (United States)

    Studer, P.

    1965-01-01

    Electron beam switching tube eliminates physical contact between rotor and stator in brushless dc motor. The tube and associated circuitry control the output of a dc source to sequentially energize the motor stator windings.

  10. Bao-De DC project went into commercial operation

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    On April 11, the Northwest—Central China (Sichuan) DC interconn-ection project, ±500 kV Baoji—Deyang (Bao—De) DC transmission project, smoothly passed 14-day trial operation, and formally went into

  11. Three Phase Resonant DC Power Converter for Ion Thrusters Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Our phase 1 study has revealed many significant benefits of a new class of DC-to-DC power converters with performance that cannot be matched by current flight power...

  12. Trends of Development of Interruption Technologies in DC Circuit Breaker

    Energy Technology Data Exchange (ETDEWEB)

    Lee, B.Y.; Chung, J.K.; Shin, Y.J.; Park, K.Y. [Korea Electrotechnology Research Institute (Korea)

    1999-05-01

    This paper describes the necessity and the history of the development of DC circuit breaker and the trends of the development of interruption technologies in DC circuit breaker. (author). 8 refs., 3 figs., 3 tabs.

  13. Static DC to DC Power Conditioning-Active Ripple Filter, 1 MHZ DC to DC Conversion, and Nonlinear Analysis. Ph.D. Thesis; [voltage regulation and conversion circuitry for spacecraft power supplies

    Science.gov (United States)

    Sander, W. A., III

    1973-01-01

    Dc to dc static power conditioning systems on unmanned spacecraft have as their inputs highly fluctuating dc voltages which they condition to regulated dc voltages. These input voltages may be less than or greater than the desired regulated voltages. The design of two circuits which address specific problems in the design of these power conditioning systems and a nonlinear analysis of one of the circuits are discussed. The first circuit design is for a nondissipative active ripple filter which uses an operational amplifier to amplify and cancel the sensed ripple voltage. A dc to dc converter operating at a switching frequency of 1 MHz is the second circuit discussed. A nonlinear analysis of the type of dc to dc converter utilized in designing the 1 MHz converter is included.

  14. A continuous nonlinear model approach to study the behavior of large signal DC to DC converters

    Science.gov (United States)

    Guinjoan, Francisco

    The study of signal switching DC-DC converters behavior is addressed. Given the fact that the linear methods cannot be used in this case, a nonlinear model was developed. The power stage nonlinear continuous model, which can be applied in both conduction modes (continuous and discontinuous), is obtained from the partition of the characteristic state vector variables in two subsets. This method is applied to the elementary switching cells (buck, boost, and buck-boost) and Cuk converter. It is oriented to the fast numerical simulation by means of general purpose simulation programs. Different results from numerical simulations, confirming the accuracy of the method used, either in an open loop or in a closed loop, are obtained, provided the validity of its domain is respected. The nonlinear model linearization made it possible to obtain equivalent transmittances for the DC-DC converters. Its application to a boost converter operating in the discontinuous condition mode at variable frequency rate enables the comparison of the obtained results with other existing methods and equivalence between the two of them to be easily established. The revision of the initial hypothesis leads to the establishment of a small signal model valid in the high frequency domain and to the results obtained being derived in a more systematic way. A model for switching DC-DC converters is given. Its validity is established, whatever its order and conduction modes, either in an open loop or a closed loop.

  15. System Tests with DC-DC Converters for the CMS Silicon Strip Tracker at SLHC

    CERN Document Server

    Klein, K; Karpinski, W; Merz, J; Sammet, J

    2008-01-01

    The delivery of power is considered to be one of the major challenges for the upgrade of the CMS silicon strip tracker for SLHC. The inevitable increase in granularity and complexity of the device is expected to result in a power consumption comparable or even higher than the power consumption of todays' strip tracker. However, the space available for cables will remain the same. In addition, a further increase of the tracker material budget due to cables and cooling is considered inacceptable, as the performance of the CMS detector must not be compromised for the upgrade. Novel powering schemes such as serial powering or usage of DC-DC converters have been proposed to solve the problem. To test the second option, substructures of the current CMS silicon strip tracker have been operated for the first time with off-the-shelf DC-DC buck converters as well as with first prototypes of custom-designed DC-DC converters. The tests are described and the results are discussed.

  16. DC-DC Conversion Powering Schemes for the CMS Tracker Upgrade

    CERN Document Server

    Feld, Lutz; Klein, Katja; Merz, Jennifer; Sammet, Jan; Wlochal,Michael

    2011-01-01

    The CMS experiment foresees upgrades of its silicon pixel and strip detectors for the luminosity upgrade of the Large Hadron Collider (LHC), CERN. Due to an increase in the number of readout channels and higher complexity, larger currents will have to be provided to the detector. Since cable channels are difficult to access and space for cables is limited, this would lead to excessively large resistive power losses in the supply cables, which increase with the current squared. CMS has therefore chosen a novel powering scheme based on DC-DC converters, which allows power to be delivered at a higher voltage and consequently lower current. The development of low-mass, low-noise DC-DC converters for application in CMS is presented, including studies of switching noise, magnetic emissions and power efficiency as well as system tests with silicon strip and pixel modules. A scheme for the integration of DC-DC converters in the silicon pixel detector, currently foreseen to be exchanged around 2016, will be discussed.

  17. SIMULATION AND IMPLEMENTATION OF CURRENT CONTROL OF BRUSHLESS DC MOTOR BASED ON A COMMON DC SIGNAL

    Directory of Open Access Journals (Sweden)

    J.Karthikeyan

    2010-06-01

    Full Text Available The objective of this project is to build a simple current controlled modulation technique for brushless dc motors. In electric traction and most other applications, a wide range of speed and torque control of the electric motor is required. The dc machine fulfills these requirements, but the dc machine requires constant maintenance. But the brushless permanent magnet motors do not have brushes and so they require less maintenance only. Brushless dc motors are widely used in applications which require wide range of speed and torque control because of its low inertia, fast response, high reliability and maintenance free. This current controlled technique is based on the generation of quasi- square wave currents using only one controller for the three phases. The current control strategy uses a triangular carrier for the power transistors which is simpler and more accuratethan any other options. The advantages of this technique are: a The stator currents are completely characterized by their maximum amplitude , b The three phases are controlled with the same dc component , and then the phase currents are kept at exactly the same magnitude I max, c The dc link current measurement is not required .d phase currents are kept balanced and phase over currents are eliminated.

  18. Load Dump Analysis in a 42/14V DC-DC Converter for Automotive Applications

    Directory of Open Access Journals (Sweden)

    Mohamed Abdualla Shrud

    2013-07-01

    Full Text Available The paper presents a model for a dc-dc centralised based architecture using Matlab/Simulink for load dump analysis. As the electrical load varies for various driving conditions such as day or night, summer or winter; and city or country side, the analysis of load change is a very important parameter for system behaviour. In order to study the 42V power generation dynamic performance under load variations, step change in loads have been investigated. A detailed mathematical model for a 3-phase, 4 kW and 42V Lundell alternator average electrical equivalent circuit along with the DC/DC converter based architectures for dual-voltage systems has been covered in previous publications. Aspects of the steady-state output current capabilities, transient behaviour due to load dump on the 14/42V buses and the behaviour of the system model under different loads are assessed and results discussed. The performance of the 42V Lundell alternator with the interleaved six-phase buck dc-to-dc converter system is modelled using Simulink software to assess the effectiveness of the model and its transient behaviour. The simulated results are presented for the transient characteristics of the system for load dumps.

  19. A DC-DC Converter Efficiency Model for System Level Analysis in Ultra Low Power Applications

    Directory of Open Access Journals (Sweden)

    Benton H. Calhoun

    2013-06-01

    Full Text Available This paper presents a model of inductor based DC-DC converters that can be used to study the impact of power management techniques such as dynamic voltage and frequency scaling (DVFS. System level power models of low power systems on chip (SoCs and power management strategies cannot be correctly established without accounting for the associated overhead related to the DC-DC converters that provide regulated power to the system. The proposed model accurately predicts the efficiency of inductor based DC-DC converters with varying topologies and control schemes across a range of output voltage and current loads. It also accounts for the energy and timing overhead associated with the change in the operating condition of the regulator. Since modern SoCs employ power management techniques that vary the voltage and current loads seen by the converter, accurate modeling of the impact on the converter efficiency becomes critical. We use this model to compute the overall cost of two power distribution strategies for a SoC with multiple voltage islands. The proposed model helps us to obtain the energy benefits of a power management technique and can also be used as a basis for comparison between power management techniques or as a tool for design space exploration early in a SoC design cycle.

  20. Definición de un proyecto de norma de calidad para una cadena de supermercados de Santafé de Bogotá Definition of project of a quality rule for supermarket chain of Santafe de Bogota

    Directory of Open Access Journals (Sweden)

    Bogotá R. Ricardo A.

    1996-12-01

    Full Text Available Este trabajo se realizó durante el segundo semestre de 1994 y el primer semestre de 1995, en la Bodega CENDIS-FRUVER de Carulla & Cia. y en 14 almacenes de esta empresa con sede en la ciudad de Santafé de Bogotá, se hizo un reconocimiento de tres unidades de producción ubicadas en Cartagena (Bolívar, San Luis de Cubarral (Meta y San Martin (Meta, correspondientes a tres proveedores de papaya común de esta empresa. EI objetivo general de este trabajo fue elaborar un Proyecto de Norma de Calidad de la Papaya Común (Carica papaya L., mediante el estudio integrado de aspectos relacionados con la producción, comercialización, manejo poscosecha y las preferencias del consumidor de esta fruta en el mercado de Santafé de Bogotá.This work was done during the second semester of 1994 and the first semester of 1995 in the Carulla & Cia SA installations. An examination of 3 production units in Cartagena (Bolivar, San Luis de Cubarral (Meta and San Martin (Meta was its. The general objective of this work was to elaborate a rule quality prayect for the common papaya (Carica papaya L. in the Carulla & Cia SA instalations thraug the integral study of the aspects which are related with production, comercialization and post harveast management and the preferences of consumers in Santafe de Bogota.

  1. Analysis of DC Power Transmission Using High Tc Superconducting Cables

    Institute of Scientific and Technical Information of China (English)

    Jun-Lian Zhang; Jian-Xun Jin

    2008-01-01

    A conceptual superconducting DC cable model is designed and its magnetic fields distribution is analyzed with Ansoft/Maxwell soft. A DC Power transmission system is also studied by using the Matlab/Simulink. With the DC Line and AC Ground Fault, the system losses analysis is introduced.The analysis results mainly include the magnetic fields distribution of the HTS cable model with Ansoft/Maxwell, the system loss, the DC Line and AC Ground Fault with Matlab/Simulation.

  2. Power electronics improving 3-Wire DC railways electrification

    OpenAIRE

    Rull Duran, Joan; Bergas Jané, Joan Gabriel; Galceran Arellano, Samuel; Sumper, Andreas; Coves Moreno, Jordi

    2009-01-01

    Urban DC railway substations are growing in size due increasing capacity demand. Several challenges associated with the increase of power demand can be met using power electronics. The proposed system is based on DC-autotransformers and active rectifiers working similarly to those in 3-wire AC railway electrification system. Conventional simulation software (Idom-REPS-DC) has been adapted to the system. A real subway line and the same line with the proposed 3-Wire DC working in the same condi...

  3. Investigation for the Flashover Phenomenon in DC Machines

    Science.gov (United States)

    Nakanishi, Yuji; Sugimoto, Kensho; Morita, Noboru

    Although in recent years, large DC machines have gradually been replaced with variable-speed AC machines, many large DC machines are still operating in steel mills. Flashover is still a frequent occurrence and has been ongoing issues since DC machines were first brought into use. In this investigation, flashover experiments were performed using model tests. The sustained voltage of the DC arc was cleared and copper dragging was found to be related to flashover.

  4. Simulation and Performance of Brushless DC Motor Actuators.

    Science.gov (United States)

    1985-12-01

    AD-RI63 725 SIMULATION AND PERFORMANCE OF IRUSHLESS DC MOTOR ACTUATORS(U) NAVAL POSTGRADUATE SCHOOL MONTEREY CA A GERDA DEC 85 NPS69-85-628 M...California Progress Report SIMULATION AND PERFORMANCE OF BRUSHLESS DC MOTOR ACTUATORS IN SUPPORT OF THE PROGRAM "ADVANCED MISSILE CONTROL DEVICES"I of...34.’ SIMULATION AND PERFORMANCE OF BRUSHLESS DC MOTOR ACTUATORS SUMMARY The simulation model for a Brushless D.C. Motor and the associated * commutation power

  5. A high reliable DC-DC converter for charging battery%一种蓄电池充电用高可靠性DC-DC变换器

    Institute of Scientific and Technical Information of China (English)

    陶艳

    2012-01-01

    介绍了一种能将直流高压电源变换为直流低压电源,并对蓄电池进行充电和管理的高可靠性的DC-DC变换器.详细说明了DC-DC变换器的技术参数、功能要求及插槽式模块化结构设计方法,着重阐述了开关电源模块的均流控制、充电管理功能及电路原理;归纳总结了变换器高可靠性的冗余设计及其相应保护功能.%A high reliable DC-DC converter which could transform DC high voltage power supply into DC low voltage power supply,charge and manage the battery was introduced in this paper.Its technical parameters,functional requirements and modular structure design method of slots were illustrated for the DC-DC converter,focusing on the load sharing,charging management and circuit theory of the switching power supply modules; the DC-DC converter reliability redundancy design and its corresponding protection were summarized.

  6. Thermal analysis of spacecraft DC/DC converters%航天器DC/DC变换器热分析研究

    Institute of Scientific and Technical Information of China (English)

    艾华斌; 王卫国; 袁亚飞

    2013-01-01

    为了解决航天器DC/DC变换器的热可靠性问题,利用有限元分析软件ANSYS对实际的航天器DC/DC变换器进行热仿真分析,得到了其内部的温度分布特性。并对其进行了红外成像测试实验,通过红外成像测试结果与仿真分析结果对比分析,验证了热仿真的准确性。使用有限元分析方法为航天器DC/DC变换器合理热设计提供了依据,也为同类电子设备的热设计提供了一种思路。%In order to improve the thermal reliability of spacecraft DC/DC converters,the finite element analysis software (ANSYS)was used to conduct the thermal simulation and analysis for the actual spacecraft DC/DC converters,by which the in-ternal temperature distribution of spacecraft DC/DC converters was obtained. Furthermore,the infrared imaging testing experi-ment was performed for the DC/DC converters. the accuracy of the thermal simulation was verified by comparing the simulation analysis result with the infrared imaging testing result. The finite element analysis is adopted in this paper to provide an evi-dence for rationality of thermal design of spacecraft DC/DC converters,and a method for the thermal design of similar electronic equipments.

  7. DC-DC Type High-Frequency Link DC for Improved Power Quality of Cascaded Multilevel Inverter

    Science.gov (United States)

    Sadikin, Muhammad; Senjyu, Tomonobu; Yona, Atsushi

    2013-06-01

    Multilevel inverters are emerging as a new breed of power converter options for power system applications. Recent advances in power switching devices enabled the suitability of multilevel inverters for high voltage and high power applications because they are connecting several devices in series without the need of component matching. Usually, a transformerless battery energy storage system, based on a cascaded multilevel inverter, is used as a measure for voltage and frequency deviations. System can be reduced in size, weight, and cost of energy storage system. High-frequency link circuit topology is advantageous in realizing compact and light-weight power converters for uninterruptible power supply systems, new energy systems using photovoltaic-cells, fuel-cells and so on. This paper presents a DC-DC type high-frequency link DC (HFLDC) cascaded multilevel inverter. Each converter cell is implemented a control strategy for two H-bridge inverters that are controlled with the same multicarrier pulse width modulation (PWM) technique. The proposed cascaded multilevel inverter generates lower voltage total harmonic distortion (THD) in comparison with conventional cascaded multilevel inverter. Digital simulations are carried out using PSCAD/EMTDC to validate the performance of the proposed cascaded multilevel inverter.

  8. 76 FR 52566 - Drawbridge Operation Regulations; Anacostia River, Washington, DC

    Science.gov (United States)

    2011-08-23

    ... SECURITY Coast Guard 33 CFR Part 117 Drawbridge Operation Regulations; Anacostia River, Washington, DC... Washington, DC. This deviation will test a change to the drawbridge operation schedule to determine whether a..., SE., Washington, DC 20590-0001. (4) Hand delivery: Same as mail address above, between 9 a.m. and 5...

  9. 76 FR 52602 - Drawbridge Operation Regulation; Anacostia River, Washington, DC

    Science.gov (United States)

    2011-08-23

    ..., Washington, DC AGENCY: Coast Guard, DHS. ACTION: Notice of proposed rulemaking. SUMMARY: The Coast Guard... the Anacostia River, mile 3.4 at Washington, DC. The proposed change will alter the eight hour advance..., SE., Washington, DC 20590-0001. (4) Hand delivery: Same as mail address above, between 9 a.m. and 5...

  10. 77 FR 14968 - Drawbridge Operation Regulation; Anacostia River, Washington, DC

    Science.gov (United States)

    2012-03-14

    ..., Washington, DC AGENCY: Coast Guard, DHS. ACTION: Final rule. SUMMARY: The Coast Guard is changing the..., mile 3.4, at Washington, DC. The change will alter the eight hour advance notice requirement for a... Avenue SE., Washington, DC 20590, between 9 a.m. and 5 p.m., Monday through Friday, except...

  11. Northwest to Accelerate Retirement of Dc10 Aircraft

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ Northwest Airlines announced that it will accelerate the retirement of its remaining 12DC10-30 aircraft in service. The airline said that during the next seven months,it will replace DC10 aircraft with new Airbus A330s and Boeing 747-400aircraft being returned to service.Currently, seven routes are served with the DC10.

  12. First Implementation of a \\\\ Two-Stage DC-DC Conversion Powering Scheme \\\\ for the CMS Phase-2 Outer Tracker

    CERN Document Server

    Feld, Lutz Werner; Karpinski, Waclaw; Klein, Katja; Lipinski, Martin; Pauls, Alexander Josef; Preuten, Marius; Rauch, Max Philip; Wangelik, Frederik; Wlochal, Michael

    2016-01-01

    The 2S silicon strip modules for the CMS Phase-2 tracker upgrade will require two operating voltages. These will be provided via a two-step DC-DC conversion powering scheme, in which one DC-DC converter delivers 2.5\\,V while the second DC-DC converter receives 2.5\\,V at its input and converts it to 1.2\\,V. The DC-DC converters will be mounted on a flex PCB, the service hybrid, together with an opto-electrical converter module (VTRx+) and a serializer (LP-GBT). The service hybrid will be mounted directly on the 2S module. A prototype service hybrid has been developed and its performance has been evaluated, including radiative and conductive noise emissions, and efficiency. In addition system tests with a prototype module have been performed. In this report the service hybrid will be described and the test results will be summarized.

  13. A highly efficient PV system using a series connection of DC-DC converter output with a photovoltaic panel

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ho-sung [Department of Electrical Engineering, Pusan National University, Jangjeon-dong, Geumjeong-gu, Busan 609-735 (Korea); New and Renewable Energy System Research Center, Korea Electro-technology Research Institute, 28-1, Sungju-dong Changwon-si, Kyungsannam-do, 641-120 (Korea); Kim, Jong-Hyun; Min, Byung-Duk; Yoo, Dong-Wook [New and Renewable Energy System Research Center, Korea Electro-technology Research Institute, 28-1, Sungju-dong Changwon-si, Kyungsannam-do, 641-120 (Korea); Kim, Hee-Je [Department of Electrical Engineering, Pusan National University, Jangjeon-dong, Geumjeong-gu, Busan 609-735 (Korea)

    2009-11-15

    A photovoltaic (PV) power conditioning system (PCS) must have high conversion efficiency and low cost. Generally, a PV PCS uses either a single string converter or a multilevel module integrated converter (MIC). Each of these approaches has both advantages and disadvantages. For a high conversion efficiency and low cost PV module, a series connection of a module integrated DC-DC converter output with a photovoltaic panel was proposed. The output voltage of the PV panel is connected to the output capacitor of the fly-back converter. Thus, the converter output voltage is added to the output voltage of the PV panel. The isolated DC-DC converter generates only the difference voltage between the PV panel voltage and the required total output voltage. This method reduces the power level of the DC-DC converter and enhances energy conversion efficiency compared with a conventional DC-DC converter. (author)

  14. All Digital Switch-Mode DC/DC Converters with BIST Functionality for Harsh Space Environments Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Space Micro ?Arizona State University (ASU) team will develop an all-digitally controlled, wide temperature range point-of-load switch-mode DC-DC regulator core...

  15. SUPPRESSING CONDUCTED EMI FROM A DC/DC HIGH POWER CONVERTER BASED ON MIXED-MODE FILTER

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Toavoiddisturbingrailwaysignalsystemand onboardmicroprocessor,theconvertersforelectric locomotiveshaveelectromagneticcompatibility(EMC)regulationsmorestringentthanthosefor commercialproducts,whichmakeEMCdesignfor theconvertersverychallenging.Inordertopass EMCtest,greatconcernisdevotedtoreducingthe conductedelectromagneticinterference(EMI)from DC/DChighpowerconvertersforelectriclocomo tivesrecently.IGBTsshouldbechosenasswitchdevicesin DC/DChighpowerconverterswithhighinput voltage.However,thesefast switchingd...

  16. Simulation Based Performance analysis of Active Clamp DHB ZVZCS Bidirectional DC-DC converter for Low Power Applications

    Directory of Open Access Journals (Sweden)

    V.V.Subrahmanya Kumar Bhajana

    2012-06-01

    Full Text Available A novel active clamp dual half bridge DC/DC converter with bidirectional power flow is proposed in this paper and comparative analysis between active clamp DHB ZVZCS and ZVS-ZCS bidirectional DC-DC converter topologies is also presented. By adding active clamping circuits to both bridges, zero voltage and zero current switching are achieved to improve the performance of the bidirectional DC/DC converter. The principle of operation is analyzed and simulated. With the proposed active clamp ZVZCS concept, the MATLAB simulation results of the applications of the fuel cell and battery have been obtained and compared with those of ZVS-ZCS bidirectional converter. The simulation results of proposed converter is compared with the ZVS-ZCS bidirectional DC-DC converter, efficiency, switching losses are the key parameters compared.

  17. DC-Voltage Fluctuation Elimination Through a DC-Capacitor Current Control for DFIG Converters Under Unbalanced Grid Voltage Conditions

    DEFF Research Database (Denmark)

    Liu, Changjin; Xu, Dehong; Zhu, Nan;

    2013-01-01

    Unbalanced grid voltage causes a large second-order harmonic current in the dc-link capacitors as well as dc-voltage fluctuation, which potentially will degrade the lifespan and reliability of the capacitors in voltage source converters. This paper proposes a novel dc-capacitor current control...... method for a grid-side converter (GSC) to eliminate the negative impact of unbalanced grid voltage on the dc-capacitors. In this method, a dc-capacitor current control loop, where a negative-sequence resonant controller is used to increase the loop gain, is added to the conventional GSC current control...... loop. The rejection capability to the unbalanced grid voltage and the stability of the proposed control system are discussed. The second-order harmonic current in the dc capacitor as well as dc-voltage fluctuation is very well eliminated. Hence, the dc capacitors will be more reliable under unbalanced...

  18. Automated DC Substation Short-Current Evaluation

    Directory of Open Access Journals (Sweden)

    Petr Dohnal

    2004-01-01

    Full Text Available Technical praxis has no easy-to-use standardized method for a DC short-current evaluation. For a correct rating of rectifying blocks (diodes and input and output current-carrying cables is need to know short-current parameters. The current flow in the substation is derived by commutation of rectifying blocks, which define current of transformers and DC part. For evaluating exists a semi empiric formula, that has a delimited relevance to small power range up to 50 kWatts of output power. New way of evaluation of short current is based on simulation of simplified substation model using the capabilities of DYNAST simulation program, or other dynamic equation solver based on numerical method, like Matlab.

  19. 双向DC-DC变换器

    Institute of Scientific and Technical Information of China (English)

    何婧; 韦星

    2016-01-01

    本双向DC-DC变换器由DC-DC变换器主电路模块、驱动电路模块、采样电路模块等组成,配合以ST公司的STM32F407ZE单片机基于PID算法的闭环控制,所设计的变换器能够正常、稳定的运行,可以准确的完成步进值精确可调、恒流充电,恒压放电、自动充放电切换、单片机能实时调节和显示等要求.变换器在充电模式下效率可达94.7%,在放电模式下可达97.2%.

  20. DC breakdown experiments with cobalt electrodes

    CERN Document Server

    Descoeudres, Antoine; Nordlund, Kai

    2009-01-01

    RF accelerating structures of the Compact Linear Collider (CLIC) require a material capable of sustaining high electric field with a low breakdown rate and low induced damage. Because of the similarity of many aspects of DC and RF breakdown, a DC breakdown study is underway at CERN in order to test candidate materials and surface preparations, and have a better understanding of the breakdown mechanism under ultra-high vacuum in a simple setup. The conditioning speed, breakdown field and field enhancement factor of cobalt have been measured. The average breakdown field after conditioning reaches 615 MV/m, which places cobalt amongst the best materials tested so far. By comparison with results and properties of other metals, the high breakdown field of Co could be due to its high work function and maybe also to its hexagonal crystal structure. Geneva, Switzerland (June 2009) CLIC – Note – 875

  1. Power Oscillations Damping in DC Microgrids

    DEFF Research Database (Denmark)

    Hamzeh, Mohsen; Ghafouri, Mohsen; Karimi, Houshang

    2016-01-01

    This paper proposes a new control strategy for damping of power oscillations in a multi-source dc microgrid. A parallel combination of a fuel cell (FC), a photovoltaic (PV) system and a supercapacitor (SC) are used as a hybrid power conversion system (HPCS). The SC compensates for the slow...... transient response of the FC stack. The HPCS controller comprises a multi-loop voltage controller and a virtual impedance loop for power management. The virtual impedance loop uses a dynamic droop gain to actively damp the low-frequency oscillations of the power sharing control unit. The gain of virtual...... impedance loop is determined using small signal analysis and pole placement method. The Mesh analysis is employed to further study the stability of low-frequency modes of the overall dc microgrid. Moreover, based on the guardian map theorem, a robust stability analysis is carried out to determine...

  2. Unconventional dc Transport in Rashba Electron Gases.

    Science.gov (United States)

    Brosco, Valentina; Benfatto, Lara; Cappelluti, Emmanuele; Grimaldi, Claudio

    2016-04-22

    We discuss the transport properties of a disordered two-dimensional electron gas with strong Rashba spin-orbit coupling. We show that in the high-density regime where the Fermi energy overcomes the energy associated with spin-orbit coupling, dc transport is accurately described by a standard Drude's law, due to a nontrivial compensation between the suppression of backscattering and the relativistic correction to the quasiparticle velocity. On the contrary, when the system enters the opposite dominant spin-orbit regime, Drude's paradigm breaks down and the dc conductivity becomes strongly sensitive to the spin-orbit coupling strength, providing a suitable tool to test the entanglement between spin and charge degrees of freedom in these systems.

  3. DC Magnetometry at the $T_2$ Limit

    CERN Document Server

    Ajoy, A; Cappellaro, P

    2016-01-01

    Sensing static or slowly varying magnetic fields with high sensitivity and spatial resolution is critical to many applications in fundamental physics, bioimaging and materials science. Several versatile magnetometry platforms have emerged over the past decade, such as electronic spins associated with Nitrogen Vacancy (NV) centers in diamond. However, their high sensitivity to external fields also makes them poor sensors of DC fields. Indeed, the usual method of Ramsey magnetometry leaves them prone to environmental noise, limiting the allowable interrogation time to the short dephasing time T2*. Here we introduce a hybridized magnetometery platform, consisting of a sensor and ancilla, that allows sensing static magnetic fields with interrogation times up to the much longer T2 coherence time, allowing significant potential gains in field sensitivity. While more generally applicable, we demonstrate the method for an electronic NV sensor and a nuclear ancilla. It relies on frequency upconversion of transverse DC...

  4. Electrostatic quadrupole DC accelerators for BNCT applications

    Energy Technology Data Exchange (ETDEWEB)

    Kwan, J.W.; Anderson, O.A.; Reginato, L.L.; Vella, M.C.; Yu, S.S.

    1994-04-01

    A dc electrostatic quadrupole (ESQ) accelerator is capable of producing a 2.5 MeV, 100 mA proton beam for the purpose of generating neutrons for Boron Neutron Capture Therapy. The ESQ accelerator is better than the conventional aperture column in high beam current application due to the presence of stronger transverse field for beam focusing and for suppressing secondary electrons. The major challenge in this type of accelerator is in developing the proper power supply system.

  5. Implementing two DC motor speed control strategies

    Directory of Open Access Journals (Sweden)

    José Danilo Rairán Antolines

    2010-05-01

    Full Text Available While linear control techniques for dynamic systems have been widely tested, systems are not linear in practice. This means that controllers must be re-tuned to make them useful in an experimental setup. This article presents the tuning and re-tuning process for two control strategies: a PID and an algorithm based on the choice of overall transfer function controlling a DC permanent magnet motor. The algorithms’ performance is evaluated and some recommendations are made.

  6. Practical dc SQUID system: Devices and electronics

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Guofeng [State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology (SIMIT), Chinese Academy of Sciences (CAS), Shanghai 200050 (China); Joint Research Laboratory on Superconductivity and Bioelectronics, Collaboration between CAS-Shanghai and FZJ (Germany); Zhang, Yi, E-mail: y.zhang@fz-juelich.de [Peter Grünberg Institute (PGI-8), Forschungszentrum Jülich (FZJ), D-52425 Jülich (Germany); Joint Research Laboratory on Superconductivity and Bioelectronics, Collaboration between CAS-Shanghai and FZJ (Germany); Hong, Tao; Wang, Hai [State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology (SIMIT), Chinese Academy of Sciences (CAS), Shanghai 200050 (China); Joint Research Laboratory on Superconductivity and Bioelectronics, Collaboration between CAS-Shanghai and FZJ (Germany); University of Chinese Academy of Sciences, Beijing 100049 (China); Krause, Hans-Joachim [Peter Grünberg Institute (PGI-8), Forschungszentrum Jülich (FZJ), D-52425 Jülich (Germany); Joint Research Laboratory on Superconductivity and Bioelectronics, Collaboration between CAS-Shanghai and FZJ (Germany); Xie, Xiaoming [State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology (SIMIT), Chinese Academy of Sciences (CAS), Shanghai 200050 (China); Joint Research Laboratory on Superconductivity and Bioelectronics, Collaboration between CAS-Shanghai and FZJ (Germany)

    2015-11-15

    Highlights: • The current noise contribution in direct readout scheme for dc SQUID was analyzed. • A current feedback circuit for suppressing the current noise was introduced. • Two criteria to measure the suppression factor were introduced. • A practical SQUID system with acceptable noise performance was suggested. - Abstract: In order to set up a liquid helium-cooled practical dc SQUID system with acceptable noise figure, we employ a weakly damped dc SQUID with a large flux-to-voltage transfer coefficient ∂V/∂Φ in a direct readout scheme (DRS) without flux modulation. Two preamplifiers are utilized: (1) AD 797 for a so-called “single chip readout electronics” (SCRE); (2) 6 parallel-connected bipolar transistors (PCBT). The latter reduces the preamplifier voltage noise V{sub n} but increases its current noise I{sub n}, which plays a leading role in the system low-frequency noise. We introduce a current feedback circuit (CFC) consisting of an inductor L{sub i} coupled to the SQUID with mutual inductance M{sub i} to improve the noise performance. In this work, the preamplifier I{sub n} contribution and CFC are analyzed. To evaluate the I{sub n} suppression with CFC, two criteria are presented. Furthermore, we establish a dimensionless parameter ξ to describe CFC quantitatively. The system noise is compared with and without CFC using the two preamplifiers. For a dc SQUID with a loop inductance of 350 pH, an intrinsic noise of about 5 μΦ{sub 0}/√Hz and a corner frequency at 2 Hz are measured using PCBT with CFC.

  7. Circuit Regulates Speed Of dc Motor

    Science.gov (United States)

    Weaver, Charles; Padden, Robin; Brown, Floyd A., Jr.

    1990-01-01

    Driving circuit regulates speed of small dc permanent-magnet motor in tape recorder. Two nested feedback loops maintain speed within 1 percent of constant value. Inner loop provides coarse regulation, while outer loop removes most of variation in speed that remains in the presence of regulation by the inner loop. Compares speed of motor with commanded speed and adjusts current supplied to motor accordingly.

  8. 75 FR 38017 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-9-10 Series Airplanes, DC-9-30...

    Science.gov (United States)

    2010-07-01

    ... Corporation Model DC- 9-10 Series Airplanes, DC-9-30 Series Airplanes, DC-9-81 (MD-81) Airplanes, DC-9-82 (MD-82) Airplanes, DC-9-83 (MD-83) Airplanes, DC-9- 87 (MD-87) Airplanes, MD-88 Airplanes, and MD-90-30..., Room W12-140, 1200 New Jersey Avenue, SE., Washington, DC 20590. Hand Delivery: U.S. Department...

  9. Design of high voltage DC-DC power supply based on LCS703HG%基于LCS703HG的高压DC-DC电源设计

    Institute of Scientific and Technical Information of China (English)

    韩冬林

    2012-01-01

    LCS703HG integrated LLC power stage IC was adopted to realize a DC-DC converter with 380 V DC input and 24 V DC/7 A output. According to characteristic and working principle of LCS703HG, the peripheral application circuit was designed, the key part of the circuit was analyzed, and the design was verified by test results.%采用集成了LLC谐振控制器的半桥功率芯片LCS703HG,实现了380 V DC高压输入,24 V DC/7 A输出的DC-DC电源设计.根据LCS703HG的特性和工作原理,设计了外围应用电路,分析了电路设计中的关键环节,并用测试结果验证了设计.

  10. Estimation of Bidirectional Buck/boost DC/DC Converters with Electric Double-Layer Capacitors for Energy Storage Systems

    Science.gov (United States)

    Funabiki, Shigeyuki; Yamamoto, Masayoshi

    Renewable energy such as wind force and solar light has collected the attention as alternative energy sources of fossil fuel. An energy storage system with an electric double-layer capacitor (EDLC), which balances the demand and supply power, is required in order to introduce the electric power generating system that utilizes renewable energy. Currently, the research and development of these energy storage systems are actively carried out. In the energy storage system with an EDLC, the DC/DC converter having the function of the bidirectional power flow and the buck/boost performance is essential as an interface and power control circuit. There are two types of the bidirectional buck/boost DC/DC converters. One type consists of two buck/boost DC/DC converters with one reactor. The other type consists of two sets of two-quadrant DC/DC converters with one reactor. This paper discusses the comparison of these types of DC/DC converters with bidirectional power flow and buck/boost performance. The two types of DC/DC converters are estimated for their application to the energy storage system with the EDLC. As the voltage endurance of the device is lower and the mean current is smaller in the latter type of converter despite of having twice the number of devices compared to the former, the latter type of converter has the advantage of a smaller reactor, i.e., core volume and loss, and lower loss in the converter.

  11. Stabilized DC power supplies; Alimentations continues stabilisees

    Energy Technology Data Exchange (ETDEWEB)

    Boutouyrie, B. [Ecole Superieure d' Electricite, 91 - Gif-sur-Yvette (France)

    2002-05-01

    This article deals with DC power supplies devoted to electronic equipments with a power comprised between 10 W to 5000 W with a AC (50 Hz to 400 Hz) or a DC input and one or several DC outputs of 200 V maximum. The broad outlines of the main technical problems are presented and a particular care is given to the parameters interesting for user's applications: 1 - principles (in-series regulation and switching power supplies); 2 - noise in switching power supplies (disturbances transferred by conductors and frame, radio-frequency noise, noise measurement, output waveform); 3 - disturbances standardization (classes, regulation and label, standards); 4 - mean time between failure (MTBF) and reliability (calculated or demonstrated MTBF, reliability, reliability-limiting components, new test and burn-in methods); 5 - efficiency and cooling; 6 - applications (input current, sense, decoupling, current limitation, in-parallel installation, redundancy, battery charging, use with inductive load, power factor correction, modular power supplies); 7 - some advices. (J.S.)

  12. Development of a smart DC grid model

    Energy Technology Data Exchange (ETDEWEB)

    Dalimunthe, Amty Ma’rufah Ardhiyah; Mindara, Jajat Yuda; Panatarani, Camellia; Joni, I. Made, E-mail: imadejoni@phys.unpad.ac.id [Lab. of Instrumentation System and Functional Material Processing, Physics Department, Faculty of Mathematics and Natural Sciences, Padjadjaran University, Jl. Raya Bandung-Sumedang KM21, Jatinangor 45363, Jawa Barat (Indonesia)

    2016-03-11

    Smart grid and distributed generation should be the solution of the global climate change and the crisis energy of the main source of electrical power generation which is fossil fuel. In order to meet the rising electrical power demand and increasing service quality demands, as well as reduce pollution, the existing power grid infrastructure should be developed into a smart grid and distributed power generation which provide a great opportunity to address issues related to energy efficiency, energy security, power quality and aging infrastructure systems. The conventional of the existing distributed generation system is an AC grid while for a renewable resources requires a DC grid system. This paper explores the model of smart DC grid by introducing a model of smart DC grid with the stable power generation give a minimal and compressed circuitry that can be implemented very cost-effectively with simple components. The PC based application software for controlling was developed to show the condition of the grid and to control the grid become ‘smart’. The model is then subjected to a severe system perturbation, such as incremental change in loads to test the performance of the system again stability. It is concluded that the system able to detect and controlled the voltage stability which indicating the ability of power system to maintain steady voltage within permissible rangers in normal condition.

  13. Development of a smart DC grid model

    Science.gov (United States)

    Dalimunthe, Amty Ma'rufah Ardhiyah; Mindara, Jajat Yuda; Panatarani, Camellia; Joni, I. Made

    2016-03-01

    Smart grid and distributed generation should be the solution of the global climate change and the crisis energy of the main source of electrical power generation which is fossil fuel. In order to meet the rising electrical power demand and increasing service quality demands, as well as reduce pollution, the existing power grid infrastructure should be developed into a smart grid and distributed power generation which provide a great opportunity to address issues related to energy efficiency, energy security, power quality and aging infrastructure systems. The conventional of the existing distributed generation system is an AC grid while for a renewable resources requires a DC grid system. This paper explores the model of smart DC grid by introducing a model of smart DC grid with the stable power generation give a minimal and compressed circuitry that can be implemented very cost-effectively with simple components. The PC based application software for controlling was developed to show the condition of the grid and to control the grid become `smart'. The model is then subjected to a severe system perturbation, such as incremental change in loads to test the performance of the system again stability. It is concluded that the system able to detect and controlled the voltage stability which indicating the ability of power system to maintain steady voltage within permissible rangers in normal condition.

  14. Marvel and DC Characters Inspired by Arachnids

    Directory of Open Access Journals (Sweden)

    Elidiomar Ribeiro Da-Silva

    2014-12-01

    Full Text Available This article compares arachnid-based Marvel and DC comics characters. The composition of a comic book character often has interesting ‘real-life’ influences. Given the strong connection between arachnids (especially spiders, scorpions and mites, all belonging to the zoological class 'Arachnida' and human beings it is not surprising that they have inspired many fictional characters. We recorded 84 Marvel Comics characters and 40 DC Comics characters, detailed in the dataset that accompanies the article (Da-Silva 2014. Most characters have been created recently, since the 1990s. Marvel has significantly more arachnid characters than DC. As for taxonomic classification, the characters were based mostly on spiders (zoological order 'Araneae'. Of the total characters, the majority are human beings, but an overwhelming number have at least some typical arachnid features. Villains (60.91% of total are significantly more numerous, considering the sum of the two publishers. Arachnids have bad reputation for being dangerous (Thorp and Woodson 1976; Ruppert and Barnes 1996. Since the public usually considers spiders, scorpions and mites “harmful” in general, we expected a larger contingent of villains. However, there was no statistical difference between the amount of villains and heroes in Marvel characters. It did not happen probably due to the success of one character: the Amazing Spider-Man.

  15. DC-8 Airborne Laboratory in flight

    Science.gov (United States)

    1998-01-01

    NASA's DC-8 Airborne Science platform shown against a background of a dark blue sky on February 20, 1998. The aircraft is shown from the right rear, slightly above its plane, with the right wing in the foreground and the left wing and horizontal tail in the background. The former airliner is a 'dash-72' model and has a range of 5,400 miles. The craft can stay airborne for 12 hours and has an operational speed range between 300 and 500 knots. The research flights are made at between 500 and 41,000 feet. The aircraft can carry up to 30,000 lbs of research/science payload equipment installed in 15 mission-definable spaces. NASA is using a DC-8 aircraft as a flying science laboratory. The platform aircraft, based at NASA's Dryden Flight Research Center, Edwards, Calif., collects data for many experiments in support of scientific projects serving the world scientific community. Included in this community are NASA, federal, state, academic and foreign investigators. Data gathered by the DC-8 at flight altitude and by remote sensing have been used for scientific studies in archeology, ecology, geography, hydrology, meteorology, oceanography, volcanology, atmospheric chemistry, soil science and biology.

  16. DC Power System of Electric Vehicle

    Directory of Open Access Journals (Sweden)

    Zhang Liwei

    2013-11-01

    Full Text Available In recent years, environmental and energy problem has become one of the world's hot spot problems. Today, the road cars not only consume a lot of oil resource, but also cause serious pollution to human survival environment. Therefore, to save energy and protect environment, a green environmental friendly electric car instead of fuel car will be needed for sustainable development of the society. Electric vehicle has no pollution, low noise, high efficiency, diversification, simple structure and convenient maintaining; the development of green cleaning electric vehicle is the trend, and the inevitable choice. The power supply system of electric vehicle can be divided into three parts, the battery charging system, motor drive system and dc load power supply system. This paper mainly studies the dc load power supply system. Main function is to convert the high-voltage of the battery in the electric vehicle into low voltage output, provide the power supply for the low voltage dc load, including the car safety system, windshield wiper system, audio system. On the basis of the analysis of the parameters, this article designs the converter, sets up the principle prototype, analyzes the experimental results and finally makes conclusion. The vehicle power supply is green, environment friendly, high-efficiency, digital and intelligent.    

  17. AC/DC and DC/AC Converty Circuits in Power Supply Equipment%电源设备中AC/DC和DC/AC变换电路

    Institute of Scientific and Technical Information of China (English)

    杨碧石

    2001-01-01

    电源设备中根据电路变换功能来看,可分为四种类型:AC/DC、DC/AC、DC/DC、AC/AC,本文对AC/DC、DC/AC这两种变换的工作原理进行分析阐述并讨论每种电路的应用领域.

  18. An FPGA Based Controller for a SOFC DC-DC Power System

    Directory of Open Access Journals (Sweden)

    Kanhu Charan Bhuyan

    2013-01-01

    Full Text Available Fuel cells are an attractive option for alternative power and of use in a variety of applications. This paper proposes a state space model for the solid oxide fuel cell (SOFC based power system that comprises fuel cell, DC-DC buck converter, and load. In this investigation we have taken up a case study for SOFC feeding a DC load where a DC-DC buck converter acts as the interface between the load and the source. A proportional-integral (PI controller is used in conjunction with pulse width modulation (PWM that computes the pulse width and switches the MOSFET at the right instant so that the desired voltage is obtained. The proposed model is validated through extensive simulation using MATLAB/SIMULINK. Controller for the fuel cell power system (FCPS is prototyped using XC3S500E development board containing a SPARTAN 3E Xilinx FPGA that simplifies the entire control circuit besides providing additional flexibility for further improvement. The results clearly indicate improved performance and validate our proposed model.

  19. Comparison of control schemes for a fuel cell hybrid tramway integrating two dc/dc converters

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez, L.M.; Garcia, P.; Garcia, C.A. [Department of Electrical Engineering, EPS Algeciras, University of Cadiz, Avda. Ramon Puyol, s/n, 11202 Algeciras (Cadiz) (Spain); Torreglosa, J.P.; Jurado, F. [Department of Electrical Engineering, EPS Linares, University of Jaen, C/Alfonso X, n 28. 23700 Linares (Jaen) (Spain)

    2010-06-15

    This paper describes a comparative study of two control schemes for the energy management system of a hybrid tramway powered by a Polymer Electrolyte Membrane (PEM) Fuel Cell (FC) and an Ni-MH battery. The hybrid system was designed for a real surface tramway of 400 kW. It is composed of a PEM FC system with a unidirectional dc/dc boost converter (FC converter) and a rechargeable Ni-MH battery with a bidirectional dc/dc converter (battery converter), both of which are coupled to a traction dc bus. The PEM FC and Ni-MH battery models were designed from commercially available components. The function of the two control architectures was to effectively distribute the power of the electrical sources. One of these control architectures was a state machine control strategy, based on eight states. The other was a cascade control strategy which was used to validate the results obtained. The simulation results for the real driving cycle of the tramway reflected the optimal performance of the control systems compared in this study. (author)

  20. Time delay control for fuel cells with bidirectional DC/DC converter and battery

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Y.B. [Mechanical Engineering Department, Chonnam National University, Gwangju (Korea); Kang, S.J. [Mechatronics Engineering Department, Korea Polytechnic College V, Gwangju (Korea)

    2010-08-15

    Transient behavior is a key property in the vehicular application of proton exchange membrane (PEM) fuel cells. A better control technology is constructed to increase the transient performance of PEM fuel cells. A steady-state isothermal analytical fuel cell model is constructed to analyze mass transfer and water transport in the membrane. To prevent the starvation of air in the PEM fuel cell, time delay control is used to regulate the optimum stoichiometric amount of oxygen, although dynamic fluctuations exist in the PEM fuel cell power. A bidirectional DC/DC converter connects the battery to the DC link to manage the power distribution between the fuel cell and the battery. Dynamic evolution control (DEC) allows for adequate pulse-width modulation (PWM) control of the bidirectional DC/DC converter with fast response. Matlab/Simulink/Simpower simulation is performed to validate the proposed methodology, increase the transient performance of the PEM fuel cell system and satisfy the requirement of energy management. (author)