WorldWideScience

Sample records for canal pour iter

  1. A non-iterative cascaded predictive control approach for control of irrigation canals

    NARCIS (Netherlands)

    Negenborn, R.R.; Sahin, A.; Lukszo, Z.; De Schutter, B.; Morari, M.

    2009-01-01

    Irrigation canals transport water from water sources (such as large rivers and lakes) to water users (such as farmers). Irrigation canals are typically very large in nature, covering vast geographical areas, and involving a significant number of control actuators, such as pumps, gates, and locks. Th

  2. Iter

    Science.gov (United States)

    Iotti, Robert

    2015-04-01

    ITER is an international experimental facility being built by seven Parties to demonstrate the long term potential of fusion energy. The ITER Joint Implementation Agreement (JIA) defines the structure and governance model of such cooperation. There are a number of necessary conditions for such international projects to be successful: a complete design, strong systems engineering working with an agreed set of requirements, an experienced organization with systems and plans in place to manage the project, a cost estimate backed by industry, and someone in charge. Unfortunately for ITER many of these conditions were not present. The paper discusses the priorities in the JIA which led to setting up the project with a Central Integrating Organization (IO) in Cadarache, France as the ITER HQ, and seven Domestic Agencies (DAs) located in the countries of the Parties, responsible for delivering 90%+ of the project hardware as Contributions-in-Kind and also financial contributions to the IO, as ``Contributions-in-Cash.'' Theoretically the Director General (DG) is responsible for everything. In practice the DG does not have the power to control the work of the DAs, and there is not an effective management structure enabling the IO and the DAs to arbitrate disputes, so the project is not really managed, but is a loose collaboration of competing interests. Any DA can effectively block a decision reached by the DG. Inefficiencies in completing design while setting up a competent organization from scratch contributed to the delays and cost increases during the initial few years. So did the fact that the original estimate was not developed from industry input. Unforeseen inflation and market demand on certain commodities/materials further exacerbated the cost increases. Since then, improvements are debatable. Does this mean that the governance model of ITER is a wrong model for international scientific cooperation? I do not believe so. Had the necessary conditions for success

  3. Systèmes de transmission sans fil multi-émetteurs, multi-récepteurs, pour des applications transports. Etude des modèles de canal de propagation

    OpenAIRE

    PARDONCHE, JF

    2004-01-01

    Les travaux présentés dans ce mémoire portent sur l'utilisation des techniques Mimo pour des applications dans les transports publics (autobus urbains ou métros). Notre travail de recherche s'est tout particulièrement orienté vers la connaissance et la modélisation du canal de propagation Mimo afin de disposer des outils adaptés lors de l'analyse des performances d'une chaine de transmission mimo. Différents types de modèles de canal Mimo sont présentés dans ce mémoire : les modèles détermini...

  4. Remedial chemo-radiotherapy for mediastinum and pleuro-pulmonary metastases of an anal canal cancer; Chimio-radiotherapie de rattrapage pour metastases mediastinales et pleuropulmonaires d'un cancer du canal anal

    Energy Technology Data Exchange (ETDEWEB)

    Moreau, M.V.; Tournier-Rangeard, L.; Peiffert, D. [Centre Alexis-Vautrin, Service de Radiotherapie, 54 - Nancy (France)

    2006-11-15

    A fifty seven years woman received ten years ago, a radiotherapy with iodine for a Basedow hyperthyroidism. In 2001 she was damaged bu an epidermoid carcinoma of the anal canal. Radiotherapy, then chemotherapy, then brachytherapy. During three years noting special to declare. In 2004, respiratory insufficiency leads her to consult. A PET scanography shows an inter-aortic-pulmonary hyper-metabolism. Cortico-therapy and radiotherapy by X rays are delivered. In front of the positive response a new chemoradiotherapy and three cycles of chemotherapy are made. After twenty five months the patient is in complete remission of her metastases after this remedial treatment. This observation illustrates the radiosensitivity of the anal canal cancers of including metastases situation, the interest of the PET scanography and utility of a remedial treatment with curative goal. (N.C.)

  5. Utilisation des méthodes géophysiques pour l'auscultation des digues en eau : Etude de cas sur le canal du Centre (France)

    OpenAIRE

    BIEVRE, G; NORGEOT, C

    2005-01-01

    Diférentes méthodes d'auscultation géophysiques non destructives ont été testées sur un corps de digue (canal du Centre, France) où des fuites existent en pied de digue. Le canal est ici construit en profil mixte (déblai côté vallée et remblai côté coteau). Une étude géologique détaillé du secteur, préalable aux mesures géophysiques, indique que la structuration locale du site, composé de formations jurassiques carbonatées de plateforme assez fortement fracturées et organisées en lanières étr...

  6. Etat de l'art des méthodes d'accès multi-canal pour les réseaux locaux sans fil

    OpenAIRE

    Senoussi Hissein, Mahamat Habib; Van Den Bossche, Adrien; Val, Thierry

    2014-01-01

    National audience; Au cours de cette dernière décennie, on constate un grand progrès dans le domaine des réseaux locaux sans fil. Leur déploiement se manifeste dans plusieurs domaines d'applications. Cependant, ces applications font face à plusieurs obstacles dus à une gestion difficile à l'accès au médium. Ceci mène le plus souvent à certains problèmes tels que : les collisions, la dégradation du débit et l'augmentation des délais. Pour surmonter ces défis, des travaux de recherches se sont ...

  7. Iterating skeletons

    DEFF Research Database (Denmark)

    Dieterle, Mischa; Horstmeyer, Thomas; Berthold, Jost;

    2012-01-01

    block inside a bigger structure. In this work, we present a general framework for skeleton iteration and discuss requirements and variations of iteration control and iteration body. Skeleton iteration is expressed by synchronising a parallel iteration body skeleton with a (likewise parallel) state...

  8. Iterating skeletons

    DEFF Research Database (Denmark)

    Dieterle, Mischa; Horstmeyer, Thomas; Berthold, Jost;

    2012-01-01

    Skeleton-based programming is an area of increasing relevance with upcoming highly parallel hardware, since it substantially facilitates parallel programming and separates concerns. When parallel algorithms expressed by skeletons involve iterations – applying the same algorithm repeatedly...... block inside a bigger structure. In this work, we present a general framework for skeleton iteration and discuss requirements and variations of iteration control and iteration body. Skeleton iteration is expressed by synchronising a parallel iteration body skeleton with a (likewise parallel) state......-based iteration control, where both skeletons offer supportive type safety by dedicated types geared towards stream communication for the iteration. The skeleton iteration framework is implemented in the parallel Haskell dialect Eden. We use example applications to assess performance and overhead....

  9. Project of law, adopted by the Senate, giving permission to the approval of the agreement between the French government and the international organization for thermonuclear fusion energy ITER, relative to the head office of ITER organization and to the privileges and immunities of ITER organization in the French territory; Projet de loi adopte par le Senat, autorisant l'approbation de l'accord entre le Gouvernement de la Republique francaise et l'Organisation internationale ITER pour l'energie de fusion relatif au siege de l'Organisation ITER et aux privileges et immunites de l'Organisation ITER sur le territoire francais

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-01-15

    The will of building up an international thermonuclear experimental reactor (ITER) gathers since several years the European community of atomic energy (Euratom), Japan, the USA, and Russia, next followed by China, South Korea and, since 2005, by India. The agreement signed in Paris between these seven parties on November 21, 2006 entrusted the international organization ITER with the realization of this project. The implications of the ITER project are enormous both in their scientific and in their economical aspects. France has a particular position in this project since the head office of ITER organisation is sited at Saint-Paul-lez-Durance and the tokamak will be built at Cadarache. Therefore, an agreement has been signed between ITER organization and the French government. The approval of this agreement is the object of this project of law made of a single article. The agreement between the French government and the international organization ITER is attached to the document. It defines the juridical status, the privileges and immunities of the organization itself and of its personnel inside the French territory. An appendix to the agreement precises the cooperation modalities between the French authorities and ITER organization. (J.S.)

  10. canal24

    Data.gov (United States)

    California Department of Resources — Canal system center lines in the Central Valley of California and adjacent areas captured from 1:24,000-scale USGS topographic maps. Updates and modifications made...

  11. DE CANALES

    Directory of Open Access Journals (Sweden)

    Roberto Carlos Guevara C.

    2013-01-01

    Full Text Available La amplia utilización de redes WiFi en los diversos escenarios sociales está generando una especie de saturación de canales, que a su vez ocasiona interferencia entre estas redes. Esta situación genera solapamiento de canales, lo que hace que las tasas de trasferencia se reduzcan. En este artículo se detalla esta situación, y se estructura y aplica un experimento para encontrarle solución al problema. También se presentan los resultados tabulados y graficados utilizando la herramienta de software libre inSSider.

  12. Realisation d'un detecteur de radioactivite pour un systeme microfluidique

    Science.gov (United States)

    Girard Baril, Frederique

    Pour etablir le comportement pharmacocinetique de nouveaux radiotraceurs en imagerie moleculaire, il est necessaire d'approfondir l'analyse realisee a partir d'une image par l'ajout d'une mesure dynamique de la radioactivite dans le sang. L'Universite de Sherbrooke developpe presentement une plateforme microfluidique d'echantillonnage et d'analyse permettant la mesure de la radioactivite du plasma en temps reel. L'objectif du present projet de maitrise etait de realiser le composant optoelectronique responsable de la detection des positrons et de l'integrer a la puce microfluidique. L'option retenue a ete l'utilisation de photodiodes PIN en silicium. Un procede de fabrication, ainsi qu'une serie de photomasques ont ete developpes afin de produire une premiere iteration de prototypes. Les detecteurs ont ete concus de maniere a optimiser leur sensibilite en fonction du type de rayonnement a detecter. En effet, la region de detection doit etre suffisamment epaisse et sensible pour absorber le maximum de particules energetiques. Egalement, il est essentiel de minimiser le courant de fuite en noirceur afin d'obtenir un photocourant directement proportionnel a l'energie des radiations incidentes. Les caracteristiques electriques obtenues avec les premiers detecteurs ont ete demontrees proches des performances de detecteurs commerciaux similaires. De plus, il a ete possible d'integrer un canal microfluidique au substrat contenant les photodiodes et d'en realiser l'encapsulation sans alterer les performances electriques initiales des detecteurs. Une courbe de l'activite radioactive du 18F a ete mesuree, celle-ci se comparant a l'activite theorique associee a ce radioisotope communement utilise en TEP. Enfin, un spectre en energie des emissions radiatives du 18F a ete mesure et compare aux performances de systemes utilisant des photodiodes commerciales. Il a ete demontre que le prototype offrait un rapport signal sur bruit similaire aux systemes bases sur des photodiodes

  13. ARC Code TI: Pour

    Data.gov (United States)

    National Aeronautics and Space Administration — Pour is a general-purpose information service framework designed to accommodate a wide variety of information types with support for high volume, low frequency...

  14. Ablation laser pour la microélectronique plastique

    Science.gov (United States)

    Alloncle, A.-P.; Thomas, B.; Grojo, D.; Delaporte, Ph.; Sentis, M.; Sanaur, S.; Barret, M.; Collot, Ph.

    2006-12-01

    La microélectronique plastique connaît un développement sans précédent dans le domaine de la recherche. Cette étude s'intéresse à l'utilisation des lasers impulsionnels pour la réalisation de composants organiques sur supports souples. Les deux aspects plus particulièrement étudiés sont d'une part la gravure de polymère pour réaliser un canal entre la source et le drain, et d'autre part le développement d'un procédéde dépôt appelé LIFT pour Laser Induced Forward Transfer. Ce dernier pourrait notamment permettre dedéposer des composés organiques non solubles.

  15. The Root Canal Biofilm

    NARCIS (Netherlands)

    Sluis, van der L.W.M.; Boutsioukis, C.; Jiang, L.M.; Macedo, R.; Verhaagen, B.; Versluis, M.; Chávez de Paz, E.; Sedgley, C.M.; Kishen, A.

    2015-01-01

    The aims of root canal irrigation are the chemical dissolution or disruption and the mechanical detachment of pulp tissue, dentin debris and smear layer (instrumentation products), microorganisms (planktonic or biofilm), and their products from the root canal wall, their removal out of the root cana

  16. Root canal irrigation

    NARCIS (Netherlands)

    L. van der Sluis; C. Boutsioukis; L.M. Jiang; R. Macedo; B. Verhaagen; M. Versluis

    2015-01-01

    The aims of root canal irrigation are the chemical dissolution or disruption and the mechanical detachment of pulp tissue, dentin debris and smear layer (instrumentation products), microorganisms (planktonic or biofilm), and their products from the root canal wall, their removal out of the root cana

  17. Embeddings of Iteration Trees

    OpenAIRE

    Mitchell, William

    1992-01-01

    This paper, dating from May 1991, contains preliminary (and unpublishable) notes on investigations about iteration trees. They will be of interest only to the specialist. In the first two sections I define notions of support and embeddings for tree iterations, proving for example that every tree iteration is a direct limit of finite tree iterations. This is a generalization to models with extenders of basic ideas of iterated ultrapowers using only ultrapowers. In the final section (which is m...

  18. Report made on behalf of the commission of foreign affairs about the project of law, adopted by the Senate, giving permission to the approval of the agreement between the French government and the international organization for thermonuclear fusion energy ITER, relative to the head office of ITER organization and to the privileges and immunities of ITER organization in the French territory; Rapport fait au nom de la commission des affaires etrangeres sur le projet de loi, adopte par le senat, autorisant l'approbation de l'accord entre le Gouvernement de la Republique francaise et l'Organisation internationale ITER pour l'energie de fusion relatif au siege de l'Organisation ITER et aux privileges et immunites de l'Organisation ITER sur le territoire francais

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-02-15

    The will of building up an international thermonuclear experimental reactor (ITER) gathers since several years the European community of atomic energy (Euratom), Japan, the USA, and Russia, next followed by China, South Korea and, since 2005, by India. The agreement signed in Paris between these seven parties on November 21, 2006 entrusted the international organization ITER with the realization of this project. The implications of the ITER project are enormous both in their scientific and in their economical aspects. France has a particular position in this project since the head office of ITER organisation is sited at Saint-Paul-lez-Durance and the tokamak will be built at Cadarache. Therefore, an agreement has been signed between ITER organization and the French government. The approval of this agreement is the object of this project of law. The document presents first the principle, challenge and stakes of the ITER project and the long negotiations that have led to chose France for the setting up of the research facility. Then, it presents the agreement of November 7, 2007, which fixes the general framework of the conditions necessary to the achievement of the project. The agreement comprises the classical rules, privileges and immunities of any international organization sited on the French ground, plus some more specific dispositions in particular in the domain of management of the wastes generated by the facility. (J.S.)

  19. Commentaires sur la valeur piscicole du Canal de Roubaix (Nord

    Directory of Open Access Journals (Sweden)

    ARRIGNON J.

    1970-10-01

    Full Text Available La population piscicole du Canal de ROUBAIX a été inventoriée par pêche électrique. Trois passages, suivis chacun de l'enlèvement des poissons capturés, ont été opérés dans chacun des trois Secteurs d'inventaire. Le peuplement le plus probable ainsi estimé (par la méthode De Lury,est en rapport avec le degré de pollution du canal. On constate aussi queles poissons se cantonnent le long des berges, sur une largeur de 2 à 3mètres.L'estimation à l'hectare représente donc en réalité le stock d'une zone n'ayant que 25 % de la surface totale du Canal. Les poissons contrôlés sont pour la plupart des poissons de repeuplement.

  20. Design of canals

    CERN Document Server

    Swamee, P K

    2015-01-01

    The book presents firsthand material from the authors on design of hydraulic canals. The book discusses elements of design based on principles of hydraulic flow through canals. It covers optimization of design based on usage requirements and economic constraints. The book includes explicit design equations and design procedures along with design examples for varied cases. With its comprehensive coverage of the principles of hydraulic canal design, this book will prove useful to students, researchers, and practicing engineers. End-of-chapter pedagogical elements make it ideal for use in graduate courses on hydraulic structures offered by most civil engineering departments across the world.

  1. Offre pour nos membres

    CERN Multimedia

    Staff Association

    2016-01-01

    Walibi Rhône-Alpes accueille son événement Halloween FreakShow le week-end du 15 et 16 octobre puis tous les jours du 20 octobre au 02 novembre 2016 ! ouverture prolongée jusqu’à 19h et feu d’artifices chaque soir 29, 30 et 31 octobre ! Loup-garou show; 1 labyrinthe; jeu de piste sur le parc (et nombreux lots à gagner); animations (sculpture sur citrouilles et maquillage) et d'autres surpises ! Tarifs pour nos membres : Entrée "Zone terrestre": 23 € au lieu de 29 €. Entrée gratuite pour les enfants de moins de 3 ans, avec accès aux attractions limité. Parking gratuit.

  2. Des ballons pour demain

    Science.gov (United States)

    Régipa, R.

    A partir d'une théorie sur la détermination des formes et des contraintes globales d'un ballon de révolution, ou s'en rapprochant, une nouvelle famille de ballons a été définie. Les ballons actuels, dits de ``forme naturelle'', sont calculés en général pour une tension circonférencielle nulle. Ainsi, pour une mission donnée, la tension longitudinale et la forme de l'enveloppe sont strictement imposées. Les ballons de la nouvelle génération sont globalement cylindriques et leurs pôles sont réunis par un câble axial, chargé de transmettre une partie des efforts depuis le crochet (pôle inférieur), directement au pôle supérieur. De plus, la zone latérale cylindrique est soumise à un faible champ de tensions circonférencielles. Ainsi, deux paramètres permettent de faire évoluer la distribution des tensions et la forme de l'enveloppe: - la tension du câble de liaison entre pôles (ou la longueur de ce câble) - la tension circonférencielle moyenne désirée (ou le rayon du ballon). On peut donc calculer et réaliser: - soit des ballons de forme adaptée, comme les ballons à fond plat pour le bon fonctionnement des montgolfières infrarouge (projet MIR); - soit des ballons optimisés pour une bonne répartition des contraintes et une meilleure utilisation des matériaux d'enveloppe, pour l'ensemble des programmes stratosphériques. Il s'ensuit une économie sensible des coûts de fabrication, une fiabilité accrue du fonctionnement de ces ballons et une rendement opérationnel bien supérieur, permettant entre autres, d'envisager des vols à très haute altitude en matériaux très légers.

  3. Canals, Bypass Canal, Published in 2002, Duchesne County.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Canals dataset, was produced all or in part from Other information as of 2002. It is described as 'Bypass Canal'. Data by this publisher are often provided in...

  4. Multistate nested canalizing functions

    CERN Document Server

    Adeyeye, J O; Laubenbacher, R; Li, Y

    2013-01-01

    The concept of a nested canalizing Boolean function has been studied over the course of the last decade in the context of understanding the regulatory logic of molecular interaction networks, such as gene regulatory networks. Such functions appear preferentially in published models of such networks. Recently, this concept has been generalized to include multi-state functions, and a recursive formula has been derived for their number, as a function of the number of variables. This paper carries out a detailed analysis of the class of nested canalizing functions over an arbitrary finite field. Furthermore, the paper generalizes the concept further, and derives a closed formula for the number of such generalized functions. The paper also derives a closed formula for the number of equivalence classes under permutation of variables. This is motivated by the fact that two nested canalizing functions that differ by a permutation of the variables share many important properties with each other. The paper contributes ...

  5. Love canal questions

    Science.gov (United States)

    Bell, Peter M.

    The Environmental Protection Agency (EPA) conducted a 3-month monitoring study of the Love Canal area near Niagara Falls, N.Y., after the federal government pronounced that a potential health risk existed due to chemical waste dumps. In 1982 the Department of Health and Human Services (HHS) decided that the area was habitable, subject to implementation of effective safeguards against leakage from the canal and to cleaning up of the contaminants. Now, the Congressional Office of Technology Assessment (OTA) has announced that, with the information available, it is not possible to demonstrate with certainty that unsafe levels do not exist within the so-called “emergency declaration area” (EDA).

  6. Approximate Modified Policy Iteration

    CERN Document Server

    Scherrer, Bruno; Ghavamzadeh, Mohammad; Geist, Matthieu

    2012-01-01

    Modified policy iteration (MPI) is a dynamic programming (DP) algorithm that contains the two celebrated policy and value iteration methods. Despite its generality, MPI has not been thoroughly studied, especially its approximation form which is used when the state and/or action spaces are large or infinite. In this paper, we propose three approximate MPI (AMPI) algorithms that are extensions of the well-known approximate DP algorithms: fitted-value iteration, fitted-Q iteration, and classification-based policy iteration. We provide an error propagation analysis for AMPI that unifies those for approximate policy and value iteration. We also provide a finite-sample analysis for the classification-based implementation of AMPI (CBMPI), which is more general (and somehow contains) than the analysis of the other presented AMPI algorithms. An interesting observation is that the MPI's parameter allows us to control the balance of errors (in value function approximation and in estimating the greedy policy) in the fina...

  7. Applied iterative methods

    CERN Document Server

    Hageman, Louis A

    2004-01-01

    This graduate-level text examines the practical use of iterative methods in solving large, sparse systems of linear algebraic equations and in resolving multidimensional boundary-value problems. Assuming minimal mathematical background, it profiles the relative merits of several general iterative procedures. Topics include polynomial acceleration of basic iterative methods, Chebyshev and conjugate gradient acceleration procedures applicable to partitioning the linear system into a "red/black" block form, adaptive computational algorithms for the successive overrelaxation (SOR) method, and comp

  8. ITER test programme

    Science.gov (United States)

    Abdou, M.; Baker, C.; Casini, G.

    1991-07-01

    The International Thermonuclear Experimental Reactor (ITER) was designed to operate in two phases. The first phase, which lasts for 6 years, is devoted to machine checkout and physics testing. The second phase lasts for 8 years and is devoted primarily to technology testing. This report describes the technology test program development for ITER, the ancillary equipment outside the torus necessary to support the test modules, the international collaboration aspects of conducting the test program on ITER, the requirements on the machine major parameters and the R and D program required to develop the test modules for testing in ITER.

  9. Nutrient canal of the fibula

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Joo-Hyuk; Ehara, Shigeru; Tamakawa, Yoshiharu [Departments of Radiology, Iwate Medical University School of Medicine, Morioka (Japan); Horiguchi, Masahura [Department of Anatomy I, Iwate Medical University School of Medicine, Morioka (Japan)

    2000-01-01

    Objective. To investigate the radiological features of the nutrient canal in the fibula.Design and patients. One hundred and seventy-nine dried fibulae were studied regarding the type, number, location, and direction of the nutrient canal. They were classified into a usual type (type I: a radiolucent line confined to the cortex) and an atypical type (type II: a radiolucent line extending beyond the cortex).Results. Among the total of 230 nutrient canals seen on radiography, 197 (86%) were type I and 33 (14%) were type II. On CT scans, the ossified rim of the canal extended into the medullary cavity in type II canals. The most common site was the posteromedial aspect in both type I and type II canals. Type II canals were significantly more common in fibulae with two or three nutrient canals. The frequency of the upward direction was more common in type II canals.Conclusion. Nutrient canals with extension of the ossified rim into the medullary canal are the cause of linear lucency that may simulate a fracture. Their features are slightly different from those of usual canals. (orig.)

  10. Informatique: tous pour un ... projet

    CERN Multimedia

    Delétraz, F; Requin, J-M

    2004-01-01

    "Pour des raisons de coût et d'efficacité, les chercheurs font de plus en plus travailler ensemble des ordinateurs éparpillés sur tous les continents. Pour faire avancer la science, tous les moyens et tous les réseaux sont bons" (1 page)

  11. Iteration, Not Induction

    Science.gov (United States)

    Dobbs, David E.

    2009-01-01

    The main purpose of this note is to present and justify proof via iteration as an intuitive, creative and empowering method that is often available and preferable as an alternative to proofs via either mathematical induction or the well-ordering principle. The method of iteration depends only on the fact that any strictly decreasing sequence of…

  12. Proposition d’un outil d’aide au diagnostic du syndrome du canal carpien pour les acteurs de la santé au travail Proposal of a tool for diagnosis of carpal tunnel syndrome for Personal of Health at Work Proposición de una herramienta de ayuda en el diagnóstico del síndrome del túnel carpiano para los actores de la salud en el trabajo

    Directory of Open Access Journals (Sweden)

    Florence Bazzaro

    2012-05-01

    Full Text Available Les acteurs de la santé au travail sont confrontés à un manque d’outils quantitatifs de suivi et de diagnostic du syndrome du canal carpien (SCC. Pour répondre à ce manque, un outil de diagnostic du SCC est proposé dans cette communication. Il est composé de deux tests : le test de la roue qui consiste à détecter des encoches sur une roue en mouvement et le test de la poutre qui détecte un niveau de sensibilité à une force exercée sur un doigt concerné par le SCC. Deux études expérimentales ont été conduites pour valider cet appareil. La première étude montre que les mesures effectuées avec l’appareil sont répétables, la seconde vise à étudier la sensibilité et la spécificité de l’outil en comparaison avec une étude électrodiagnostique. Les résultats montrent que l’appareil de détection du SCC a un excellent pouvoir discriminant permettant d’identifier les sujets sains et les sujets atteints du SCC.People involved with occupational health at work are faced with a lack of quantitative tools to monitor and diagnose Carpal Tunnel Syndrome (CTS. In order to fill this gap, we developed a device for rapid CTS diagnosis which is composed of two complementary quantitative tests: the wheel test, which consists in detecting notches on a rotating wheel, and the beam test, which consists in detecting various forces exerted on a finger. We conducted two experimental studies to validate this device. The first one demonstrated the repeatability of the measures. The second one studied the sensitivity and specificity of our tool as compared to an electro-diagnosis test. The results show that our CTS detection device has excellent discriminatory power that allows practitioners to differentiate between healthy and CTS-affected subjects.Los actores de la salud en el trabajo se enfrentan a una falta de herramientas cuantitativas de seguimiento y de diagnóstico del síndrome del túnel carpiano (STC. Como respuesta a esa

  13. ITER at Cadarache; ITER a Cadarache

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-06-15

    This public information document presents the ITER project (International Thermonuclear Experimental Reactor), the definition of the fusion, the international cooperation and the advantages of the project. It presents also the site of Cadarache, an appropriate scientifical and economical environment. The last part of the documentation recalls the historical aspect of the project and the today mobilization of all partners. (A.L.B.)

  14. Curved canals: Ancestral files revisited

    Directory of Open Access Journals (Sweden)

    Jain Nidhi

    2008-01-01

    Full Text Available The aim of this article is to provide an insight into different techniques of cleaning and shaping of curved root canals with hand instruments. Although a plethora of root canal instruments like ProFile, ProTaper, LightSpeed ® etc dominate the current scenario, the inexpensive conventional root canal hand files such as K-files and flexible files can be used to get optimum results when handled meticulously. Special emphasis has been put on the modifications in biomechanical canal preparation in a variety of curved canal cases. This article compiles a series of clinical cases of root canals with curvatures in the middle and apical third and with S-shaped curvatures that were successfully completed by employing only conventional root canal hand instruments.

  15. Managing curved canals

    Directory of Open Access Journals (Sweden)

    Iram Ansari

    2012-01-01

    Full Text Available Dilaceration is the result of a developmental anomaly in which there has been an abrupt change in the axial inclination between the crown and the root of a tooth. Dilaceration can be seen in both the permanent and deciduous dentitions, and is more commonly found in posterior teeth and in maxilla. Periapical radiographs are the most appropriate way to diagnose the presence of root dilacerations. The controlled regularly tapered preparation of the curved canals is the ultimate challenge in endodontics. Careful and meticulous technique will yield a safe and sufficient enlargement of the curved canals. This article gives a review of the literature and three interesting case reports of root dilacerations.

  16. Canal Wall Reconstruction Mastoidectomy

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Objective To investigate the advantages of canal wall reconstruction (CWR) mastoidectomy, a single-stage technique for cholesteatoma removal and posterior external canal wall reconstruction, over the open and closed procedures in terms of cholesteatoma recurrence. Methods: Between June 2002 and December 2005, 38 patients (40 ears) with cholesteatoma were admited to Sun Yat-Sen Memorial Hospital and received surgical treatments. Of these patients, 25 were male with ages ranging between 11 and 60 years (mean = 31.6 years) and 13 were female with ages ranging between 20 and 65 years (mean = 38.8 years). Canal wall reconstruction (CWR)mastoidectomy was performed in 31 ears and canal wall down (CWD) mastoidectomy in 9 ears. Concha cartilage was used for ear canal wall reconstruction in 22 of the 31 CWR procedures and cortical mastoid bone was used in the remaining 9 cases. Results At 0.5 to 4 years follow up, all but one patients remained free of signs of cholesteatoma recurrence, i.e., no retraction pocket or cholesteatoma matrix. One patient, a smoker, needed revision surgery due to cholesteatoma recurrence 1.5 year after the initial operation. The recurrence rate was therefore 3.2% (1/31). Cholesteatoma recurrence was monitored using postoperative CT scans whenever possible. In the case that needed a revision procedure, a retraction pocket was identified by otoendoscopy in the pars flacida area that eventually evolved into a cholesteatoma. A pocket extending to the epitympanum filled with cholesteatoma matrix was confirmed during the revision operation, A decision to perform a modified mastoidectomy was made as the patient refused to quit smoking. The mean air-bone gap in pure tone threshold was 45 dB before surgery and 25 dB after (p < 0.05). There was no difference between using concha cartilage and cortical mastoid bone for the reconstruction regarding air-bone gap improvement, CT findings and otoendoscopic results. Conclusion CWR mastoidectomy can be used for

  17. Approximate iterative algorithms

    CERN Document Server

    Almudevar, Anthony Louis

    2014-01-01

    Iterative algorithms often rely on approximate evaluation techniques, which may include statistical estimation, computer simulation or functional approximation. This volume presents methods for the study of approximate iterative algorithms, providing tools for the derivation of error bounds and convergence rates, and for the optimal design of such algorithms. Techniques of functional analysis are used to derive analytical relationships between approximation methods and convergence properties for general classes of algorithms. This work provides the necessary background in functional analysis a

  18. Analysis of sedimentation of canals

    Directory of Open Access Journals (Sweden)

    Agunwamba, J.C.,

    2013-03-01

    Full Text Available The dredged canals in the Niger Delta coastal flood plain are being threatened by siltation. This study is limited to those canals in Rivers State of Nigeria, which are under the influence of tidal waves. A total of eight canals were considered with four each from Ekulama and Cawthorne Channel. Different approaches were used to carry out this study, which includes field reconnaissance survey, hydrographic survey, soil sample analysis and collection of all available data and information. The typical bed materials size (D50 is approximately 0.01mm; which gives a settling velocity of 0.09mm/sec using stroke’s law. Hydrographic survey of the canals from 1992 to 1996 revealed an average siltation rate of 2.35m/yr. A regression equation was also derived which relates the cost of dredging to canal area, rate of siltation and average aggregation. A plot of canal centre profile; entrance, middle and end cross sections showing sediment distribution along the canal profile, shows that majority of the particles that form the sediment enter the canal from the rivers. The sedimentation is caused by the reduction in water current, which has average value of 0.0145m/sec. The bathyorographical check on the canals revealed that the sum of the two exterior angles of the canal with the river at the point of connection has to lie within 1800 + 50 for an effective flow that will minimize settlement of particles. In addition, the canals should be constructed to start and terminate on a moving water body, to avoid dead ends. A regression equation was determined which relates the cost of dredging to canal area, rate of siltation and average aggradations.

  19. Controversy at Love Canal.

    Science.gov (United States)

    Paigen, B

    1982-06-01

    A cancer researcher reviews the events surrounding the toxic waste contamination at Love Canal with emphasis on the political nature of the controversy about its health impact. Antagonism between the community and the New York State Department of Health was fueled by several factors: the state's awareness that it gained from delay in investigation, disagreement on health problems to be studied, control over the information gathering process, silencing of opposition opinion, and the violation of norms of scientific behavior. The author calls for the establishment of standards of ethical behavior for scientists in such situations, standards for conflict resolution, and means of appeal for those injured.

  20. Spinal canal stenosis; Spinalkanalstenose

    Energy Technology Data Exchange (ETDEWEB)

    Papanagiotou, P.; Boutchakova, M. [Klinikum Bremen-Mitte/Bremen-Ost, Klinik fuer Diagnostische und Interventionelle Neuroradiologie, Bremen (Germany)

    2014-11-15

    Spinal stenosis is a narrowing of the spinal canal by a combination of bone and soft tissues, which can lead to mechanical compression of spinal nerve roots or the dural sac. The lumbal spinal compression of these nerve roots can be symptomatic, resulting in weakness, reflex alterations, gait disturbances, bowel or bladder dysfunction, motor and sensory changes, radicular pain or atypical leg pain and neurogenic claudication. The anatomical presence of spinal canal stenosis is confirmed radiologically with computerized tomography, myelography or magnetic resonance imaging and play a decisive role in optimal patient-oriented therapy decision-making. (orig.) [German] Die Spinalkanalstenose ist eine umschriebene, knoechern-ligamentaer bedingte Einengung des Spinalkanals, die zur Kompression der Nervenwurzeln oder des Duralsacks fuehren kann. Die lumbale Spinalkanalstenose manifestiert sich klinisch als Komplex aus Rueckenschmerzen sowie sensiblen und motorischen neurologischen Ausfaellen, die in der Regel belastungsabhaengig sind (Claudicatio spinalis). Die bildgebende Diagnostik mittels Magnetresonanztomographie, Computertomographie und Myelographie spielt eine entscheidende Rolle bei der optimalen patientenbezogenen Therapieentscheidung. (orig.)

  1. Robust iterative methods

    Energy Technology Data Exchange (ETDEWEB)

    Saadd, Y.

    1994-12-31

    In spite of the tremendous progress achieved in recent years in the general area of iterative solution techniques, there are still a few obstacles to the acceptance of iterative methods in a number of applications. These applications give rise to very indefinite or highly ill-conditioned non Hermitian matrices. Trying to solve these systems with the simple-minded standard preconditioned Krylov subspace methods can be a frustrating experience. With the mathematical and physical models becoming more sophisticated, the typical linear systems which we encounter today are far more difficult to solve than those of just a few years ago. This trend is likely to accentuate. This workshop will discuss (1) these applications and the types of problems that they give rise to; and (2) recent progress in solving these problems with iterative methods. The workshop will end with a hopefully stimulating panel discussion with the speakers.

  2. Quantum Iterated Function Systems

    CERN Document Server

    Lozinski, A; Slomczynski, W; Lozinski, Artur; Zyczkowski, Karol; Slomczynski, Wojciech

    2003-01-01

    Iterated functions system (IFS) is defined by specifying a set of functions in a classical phase space, which act randomly on the initial point. In an analogous way, we define quantum iterated functions system (QIFS), where functions act randomly with prescribed probabilities in the Hilbert space. In a more general setting a QIFS consists of completely positive maps acting in the space of density operators. We present exemplary classical IFSs, the invariant measure of which exhibits fractal structure, and study properties of the corresponding QIFSs and their invariant state.

  3. Etude de la violation de $CP$ directe pour l'extraction de l'angle $\\gamma$ via le canal de désintégration $B^{\\pm} \\rightarrow \\pi^{\\pm} \\pi^{\\mp} K^{\\pm}$. Etude d'un algorithme d'identification de particules dans le RICH 2 de LHCb

    CERN Document Server

    Gilles, G

    2007-01-01

    LHCb est une expérience consacrée à la physique des hadrons {it beaux} dont les premières prises de données sont prévues vers $2008$.\\ Le but de l'expérience {it LHCb} est l'étude précise de la violation de {it CP} dans le secteur de la {it beauté}. Ces particules seront produites dans les collisions proton-proton, qui auront lieu dans le futur collisionneur hadronique LHC du CERN près de Genève. La grande précision de l'expérience et la statistique disponible ($10^{12}$ événements {it beaux} par an) permettront de contraindre fortement le modèle standard et de tester sa validité. \\ L'étude de la {it violation directe de CP} dans le canal des mésons {it beaux} chargés est très prometteuse mais délicate tant les probabilités de désintégrations de ces derniers, dans les canaux susceptibles de violer la symétrie {it CP}, sont faibles ($sim 10^{-5}$). D'autre part, l'effet de {it violation de CP directe} attendu est très faible.\\ Afin de "concentrer" l'effet de {it violation de CP}, l'...

  4. Decodeurs rapides pour codes topologiques quantiques

    Science.gov (United States)

    Duclos-Cianci, Guillaume

    L'encodage topologique de l'information quantique a attire beaucoup d'attention, car c'est un modele qui semble propice a resister aux erreurs locales. Tout d'abord, le modele du calcul topologique est base sur la statistique anyonique non-Abelienne universelle et sur son controle. Des anyons indesirables peuvent apparaitre soudainement, en raison de fluctuations thermiques ou de processus virtuels. La presence de ces anyons peut corrompre l'information encodee, il est necessaire de les eliminer: la correction consiste a fusionner les defauts tout en preservant la topologie du systeme. Ensuite, dans le cas des codes topologiques, on doit aussi proteger l'information encodee dans la topologie. En effet, dans ces systemes, on n'a acces qu'a une fraction de l'information decrivant l'erreur. Elle est recueillie par des mesures et peut etre interpretee en termes de particules. Ces defauts peuplent le code et doivent etre annihiles adequatement dans le but de preserver l'information encodee. Dans ce memoire, nous proposons un algorithme efficace, appele decodeur, pouvant etre utilise dans les deux contextes decrits ci-haut. Pour y parvenir, cet algorithme s'inspire de methodes de renormalisation et de propagation de croyance. Il est exponentiellement plus rapide que les methodes deja existantes, etant de complexite O (ℓ2 log ℓ) en serie et, si on parallelise, O (log ℓ) en temps, contre O (ℓ6) pour les autres decodeurs. Le temps etant le facteur limitant dans le probleme du decodage, cette caracteristique est primordiale. De plus, il tolere une plus grande amplitude de bruit que les methodes existantes; il possede un seuil de ˜ 16.5% sur le canal depolarisant surpassant le seuil deja etabli de ˜ 15.5%. Finalement, il est plus versatile. En effet, en etant limite au code de Kitaev, on ne savait pas decoder les codes topologiques de maniere generale (e.g. codes de couleur). Or, le decodeur propose dans ce memoire peut traiter la grande classe des codes

  5. Dvorak. Concerto pour violoncelle / Francis Dresel

    Index Scriptorium Estoniae

    Dresel, Francis

    1992-01-01

    Uuest heliplaadist "Dvorak. Concerto pour violoncelle; Schumann: Concerto pour violoncelle. Orchestre Symphonique d'Estonie, Orchestre Symphonique de la Radio TV d'URSS, Neeme Järvi" Vogue "Archives Sovietiques" 651033 1978

  6. Iterative List Decoding

    DEFF Research Database (Denmark)

    Justesen, Jørn; Høholdt, Tom; Hjaltason, Johan

    2005-01-01

    We analyze the relation between iterative decoding and the extended parity check matrix. By considering a modified version of bit flipping, which produces a list of decoded words, we derive several relations between decodable error patterns and the parameters of the code. By developing a tree...

  7. Iterative software kernels

    Energy Technology Data Exchange (ETDEWEB)

    Duff, I.

    1994-12-31

    This workshop focuses on kernels for iterative software packages. Specifically, the three speakers discuss various aspects of sparse BLAS kernels. Their topics are: `Current status of user lever sparse BLAS`; Current status of the sparse BLAS toolkit`; and `Adding matrix-matrix and matrix-matrix-matrix multiply to the sparse BLAS toolkit`.

  8. Hood Canal Steelhead - Hood Canal Steelhead Supplementation Experiment

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Hood Canal Steelhead Project is a 17-year before-after-control-impact experiment that tests the effects of supplementation on natural steelhead populations in...

  9. When It Rains, It Pours

    Science.gov (United States)

    Mills, Linda

    2012-01-01

    "It's raining, it's pouring, the old man is snoring!" "The itsy, bitsy spider crawled up the waterspout, down came the rain and washed the spider out. Out came the sun and dried up all the rain, and the itsy, bitsy spider went up the spout again." What do children's nursery rhymes have to do with the school library? The author begins by telling a…

  10. Iterative Algorithms for Nonexpansive Mappings

    Directory of Open Access Journals (Sweden)

    Yao Yonghong

    2008-01-01

    Full Text Available Abstract We suggest and analyze two new iterative algorithms for a nonexpansive mapping in Banach spaces. We prove that the proposed iterative algorithms converge strongly to some fixed point of .

  11. Depolarization canals and interstellar turbulence

    CERN Document Server

    Fletcher, A; Fletcher, Andrew; Shukurov, Anvar

    2006-01-01

    Recent radio polarization observations have revealed a plethora of unexpected features in the polarized Galactic radio background that arise from propagation effects in the random (turbulent) interstellar medium. The canals are especially striking among them, a random network of very dark, narrow regions clearly visible in many directions against a bright polarized Galactic synchrotron background. There are no obvious physical structures in the ISM that may have caused the canals, and so they have been called Faraday ghosts. They evidently carry information about interstellar turbulence but only now is it becoming clear how this information can be extracted. Two theories for the origin of the canals have been proposed; both attribute the canals to Faraday rotation, but one invokes strong gradients in Faraday rotation in the sky plane (specifically, in a foreground Faraday screen) and the other only relies on line-of-sight effects (differential Faraday rotation). In this review we discuss the physical nature o...

  12. The Love Canal: Beyond science?

    Science.gov (United States)

    Bell, Peter M.

    When in 1978, the New York State Department of Health issued the report, ‘Love Canal—Public Health Time Bomb,’ the serious effects of chemical waste contamination in the Love Canal area became an issue of national concern. A few ‘studies’ since then have produced results in concert with those of initial reports that described ‘conditions of acute health effects’ as being linked to hazardous wastes incorporated in landfill in the Love Canal site near Niagara Falls, New York. Now that a ‘blue ribbon’ panel of experts from the medical sciences has reviewed the problems of Love Canal, however, a different view has emerged. The ‘Report of the Governors' Panel to Review Scientific Studies and the Development of Public Policy on Problems Resulting from Hazardous Wastes,’ transmitted in October of this year, identifies the following factors about the health effects at Love Canal:

  13. Horizontal Canal Benign Positional Vertigo

    Directory of Open Access Journals (Sweden)

    Mohtaram Najafi

    1998-03-01

    Full Text Available Benign paroxysmal positional vertigo (BPPV is a syndrome characterized by transient episodes of vertigo in association with rapid changes in head position in Dix-Halpike Maneuver. This kind of vertigo is thought to be caused by migration of otoconial debris into canals other than the posterior canal, such as the anterior or lateral canals. It is also theoretically possible for many aberrant patterns of BPPV to occur from an interaction of debris in several canals, location of debris within the canal, and central adaptation patterns to lesions. The symptoms of BPPV are much more consistent with free-moving densities (canaliths in the posterior SCC rather than fixed densities attached to the cupula. While the head is upright, the particles sit in the PSC at the most gravity-dependent position. The best method to induce and see vertigo and nystagmus in BPPV of the lateral semicircular canal is to rotate head 90°while patient is in the supine position, nystagmus would appear in the unaffected side weaker but longer than the affected side. canal paresis has been described in one third of the patients with BPPV. Adaptation which is one of the remarkable features of BPPV in PSC is rarely seen in LSC. Rotations of 270° or 360° around the yaw axis (the so-called barbecue maneuver toward the unaffected ear are popular methods for the treatment of geotropic HC-BPPV. These maneuvers consist of sequential head turning of 90° toward the healthy side while supine. With these maneuvers, the free-floating otoconial debris migrates in the ampullofugal direction, finally entering the utricle through the nonampullated end of the horizontal canal. This kind of vertigo recovers spontaneously more rapidly and suddenly.

  14. Iterative supervirtual refraction interferometry

    KAUST Repository

    Al-Hagan, Ola

    2014-05-02

    In refraction tomography, the low signal-to-noise ratio (S/N) can be a major obstacle in picking the first-break arrivals at the far-offset receivers. To increase the S/N, we evaluated iterative supervirtual refraction interferometry (ISVI), which is an extension of the supervirtual refraction interferometry method. In this method, supervirtual traces are computed and then iteratively reused to generate supervirtual traces with a higher S/N. Our empirical results with both synthetic and field data revealed that ISVI can significantly boost up the S/N of far-offset traces. The drawback is that using refraction events from more than one refractor can introduce unacceptable artifacts into the final traveltime versus offset curve. This problem can be avoided by careful windowing of refraction events.

  15. Iterative participatory design

    DEFF Research Database (Denmark)

    Simonsen, Jesper; Hertzum, Morten

    2010-01-01

    iterative process of mutual learning by designers and domain experts (users), who aim to change the users’ work practices through the introduction of information systems. We provide an illustrative case example with an ethnographic study of clinicians experimenting with a new electronic patient record......The theoretical background in this chapter is information systems development in an organizational context. This includes theories from participatory design, human-computer interaction, and ethnographically inspired studies of work practices. The concept of design is defined as an experimental...... system, focussing on emergent and opportunity-based change enabled by appropriating the system into real work. The contribution to a general core of design research is a reconstruction of the iterative prototyping approach into a general model for sustained participatory design....

  16. The Iterate Manual

    Science.gov (United States)

    1990-10-01

    is probably a bad idea. A better versica would use a temporary: (defmacro sum-of-squares (expr) (let ((temp ( gensym ))) ’(lot (,temp ,expr)) (sum...val ( gensym )) (tempi ( gensym )) (temp2 ( gensym )) (winner (or var iterate::*result-var*))) ’(progn (with ,max-val - nil) (with ,winner = nil) (cond ((null...the elements of a vector (disregards fill-pointer)" (let ((vect ( gensym )) (end ( gensym )) (index ( gensym ))) ’(progn (with ,vect - v) (with ,end = (array

  17. Limitations of navigation through Nubaria canal, Egypt.

    Science.gov (United States)

    Samuel, Magdy G

    2014-03-01

    Alexandria port is the main Egyptian port at the Mediterranean Sea. It is connected to the Nile River through Nubaria canal, which is a main irrigation canal. The canal was designed to irrigate eight hundred thousand acres of agricultural lands, along its course which extends 100 km. The canal has three barrages and four locks to control the flow and allow light navigation by some small barges. Recently, it was decided to improve the locks located on the canal. More than 40 million US$ was invested in these projects. This decision was taken to allow larger barges and increase the transported capacity through the canal. On the other hand, navigation through canals and restricted shallow waterways is affected by several parameters related to both the channel and the vessel. Navigation lane width as well as vessel speed and maneuverability are affected by both the channel and vessel dimensions. Moreover, vessel dimensions and speed will affect the canal stability. In Egypt, there are no guide rules for navigation through narrow and shallow canals such Nubaria. This situation threatens the canal stability and safety of navigation through it. This paper discussed the characteristics of Nubaria canal and the guide rules for navigation in shallow restricted water ways. Dimensions limitation for barges navigating through Nubaria canal is presented. New safe operation rules for navigation in Nubaria canal are also presented. Moreover, the implication of navigation through locks on canal discharge is estimated.

  18. Limitations of navigation through Nubaria canal, Egypt

    Directory of Open Access Journals (Sweden)

    Magdy G. Samuel

    2014-03-01

    Full Text Available Alexandria port is the main Egyptian port at the Mediterranean Sea. It is connected to the Nile River through Nubaria canal, which is a main irrigation canal. The canal was designed to irrigate eight hundred thousand acres of agricultural lands, along its course which extends 100 km. The canal has three barrages and four locks to control the flow and allow light navigation by some small barges. Recently, it was decided to improve the locks located on the canal. More than 40 million US$ was invested in these projects. This decision was taken to allow larger barges and increase the transported capacity through the canal. On the other hand, navigation through canals and restricted shallow waterways is affected by several parameters related to both the channel and the vessel. Navigation lane width as well as vessel speed and maneuverability are affected by both the channel and vessel dimensions. Moreover, vessel dimensions and speed will affect the canal stability. In Egypt, there are no guide rules for navigation through narrow and shallow canals such Nubaria. This situation threatens the canal stability and safety of navigation through it. This paper discussed the characteristics of Nubaria canal and the guide rules for navigation in shallow restricted water ways. Dimensions limitation for barges navigating through Nubaria canal is presented. New safe operation rules for navigation in Nubaria canal are also presented. Moreover, the implication of navigation through locks on canal discharge is estimated.

  19. ERGODIC THEOREM FOR INFINITE ITERATED FUNCTION SYSTEMS

    Institute of Scientific and Technical Information of China (English)

    O Hyong-chol; Ro Yong-hwa; Kil Won-gun

    2005-01-01

    A set of contraction maps of a metric space is called an iterated function systems.Iterated function systems with condensation can be considered infinite iterated function systems. Infinite iterated function systems on compact metric spaces were studied. Using the properties of Banach limit and uniform contractiveness, it was proved that the random iterating algorithms for infinite iterated function systems on compact metric spaces satisfy ergodicity. So the random iterating algorithms for iterated function systems with condensation satisfy ergodicity, too.

  20. Quantum iterated function systems.

    Science.gov (United States)

    Łoziński, Artur; Zyczkowski, Karol; Słomczyński, Wojciech

    2003-10-01

    An iterated function system (IFS) is defined by specifying a set of functions in a classical phase space, which act randomly on an initial point. In an analogous way, we define a quantum IFS (QIFS), where functions act randomly with prescribed probabilities in the Hilbert space. In a more general setting, a QIFS consists of completely positive maps acting in the space of density operators. This formalism is designed to describe certain problems of nonunitary quantum dynamics. We present exemplary classical IFSs, the invariant measure of which exhibits fractal structure, and study properties of the corresponding QIFSs and their invariant states.

  1. Iterative Magnetometer Calibration

    Science.gov (United States)

    Sedlak, Joseph

    2006-01-01

    This paper presents an iterative method for three-axis magnetometer (TAM) calibration that makes use of three existing utilities recently incorporated into the attitude ground support system used at NASA's Goddard Space Flight Center. The method combines attitude-independent and attitude-dependent calibration algorithms with a new spinning spacecraft Kalman filter to solve for biases, scale factors, nonorthogonal corrections to the alignment, and the orthogonal sensor alignment. The method is particularly well-suited to spin-stabilized spacecraft, but may also be useful for three-axis stabilized missions given sufficient data to provide observability.

  2. El Canal del Atazar I

    Directory of Open Access Journals (Sweden)

    López de Berges y de los Santos, Emilio

    1967-03-01

    Full Text Available The Atazar Canal helps to supply Madrid with water, from the rivers Lozoya, Jarama and Sorbe. The section which operates at present starts at the Torrelaguna dam and finishes at the El Goloso reservoir. Later a further section will be added, from the Atazar dam, on the Lozoya river, to link up with the control dam at Torrelaguna. The canal capacity is 16 m3/sec, and it is 43.47 km long. It has a slope of 4/10.000. The cross section is similar to that of the Jarama canal, already built. There are interconnections between this canal and the Canal Alto, which previously supplied the high and medium part of Madrid. To overcome the ground unevenness 5 syphons have been built, the most important of which is the Colmenar Goloso syphon, which is 10.88 km in length. Construction commenced on December 10, 1962, and water reached Madrid on June 15th, 1966. The initial budget for this project was 1,500 million pesetas.El canal del Atazar refuerza considerablemente el abastecimiento de aguas a Madrid, procedentes de los ríos Lozoya, Jarama y, en un próximo futuro, del Sorbe. El tramo, actualmente en funcionamiento, empieza en el salto de Torrelaguna y finaliza en los depósitos de El Goloso. Más adelante se completará su trazado mediante un nuevo tramo que partirá del embalse de Atazar, en el Lozoya, para unirse al actual en el depósito regulador de Torrelaguna. Su capacidad es de 16 m3/s; su longitud, 43,471 km, y su pendiente, 4 diezmilésimas. La sección tipo es análoga a la del canal del Jarama, de construcción anterior. Mediante la oportuna obra de transvase se realizan intercambios entre este Canal y el Canal Alto que abastecía anteriormente la parte media y alta de la capital. Para salvar los desniveles del terreno se han construido 5 sifones, siendo el más importante el de Colmenar-Goloso, con una longitud de 10,8S4 km. El comienzo de las obras tuvo lugar el 10 de diciembre de 1962, y el agua llegó a Madrid el 15 de junio de 1966. Su

  3. Caractérisation et modélisation du canal radio en chambre réverbérante

    OpenAIRE

    Delangre, Olivier

    2008-01-01

    L’utilisation d’une chambre réverbérante pour modéliser un canal de communicationsans fil a récemment été proposée. La chambre réverbérante est une cavitémétallique fermée dans laquelle se trouve une pale mécanique en mouvementpermettant de modifier les conditions aux limites et d’ainsi obtenir en moyenneune répartition uniforme des champs. Cette cavité métallique fermée présente denombreux avantages pour modéliser un canal de communication. Citons principalementle fait que l’environnement es...

  4. Caractérisation et modélisation du canal radio en chambre réverbérante

    OpenAIRE

    Delangre, Olivier

    2008-01-01

    L’utilisation d’une chambre réverbérante pour modéliser un canal de communication sans fil a récemment été proposée. La chambre réverbérante est une cavité métallique fermée dans laquelle se trouve une pale mécanique en mouvement permettant de modifier les conditions aux limites et d’ainsi obtenir en moyenne une répartition uniforme des champs. Cette cavité métallique fermée présente de nombreux avantages pour modéliser un canal de communication. Citons principalement le fai...

  5. Canals - CANALS_HISTORIC_STRUCTURES_IN: Historic Canal Structures in Indiana (Bernardin-Lochmueller & Associates, Point Shapefile)

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — Data depicts the locations of historic structures associated with the Wabash-Erie, Central, and Whitewater Canals constructed in Indiana in from 1830-1870. Canal...

  6. Runaway electrons and ITER

    Science.gov (United States)

    Boozer, Allen

    2016-10-01

    ITER planning for avoiding runaway damage depends on magnetic surface breakup in fast relaxations. These arise in thermal quenches and in the spreading of impurities from massive gas injection or shattered pellets. Surface breakup would prevent a runaway to relativistic energies were it not for non-intercepting flux tubes, which contain magnetic field lines that do not intercept the walls. Such tubes persist near the magnetic axis and in the cores of islands but must dissipate before any confining surfaces re-form. Otherwise, a highly dangerous situation arises. Electrons that were trapped and accelerated in these flux tubes can fill a large volume of stochastic field lines and serve as a seed for the transfer of the full plasma current to runaways. If the outer confining surfaces are punctured, as by a drift into the wall, then the full runaway inventory will be lost in a short pulse along a narrow flux tube. Although not part of ITER planning, currents induced in the walls by the fast magnetic relaxation could be used to passively prevent outer surfaces re-forming. If magnetic surface breakup can be avoided during impurity injection, the plasma current could be terminated in tens of milliseconds by plasma cooling with no danger of runaway. Support by DoE Office of Fusion Energy Science Grant De-FG02-03ER54696.

  7. ITER helium ash accumulation

    Energy Technology Data Exchange (ETDEWEB)

    Hogan, J.T.; Hillis, D.L.; Galambos, J.; Uckan, N.A. (Oak Ridge National Lab., TN (USA)); Dippel, K.H.; Finken, K.H. (Forschungszentrum Juelich GmbH (Germany, F.R.). Inst. fuer Plasmaphysik); Hulse, R.A.; Budny, R.V. (Princeton Univ., NJ (USA). Plasma Physics Lab.)

    1990-01-01

    Many studies have shown the importance of the ratio {upsilon}{sub He}/{upsilon}{sub E} in determining the level of He ash accumulation in future reactor systems. Results of the first tokamak He removal experiments have been analysed, and a first estimate of the ratio {upsilon}{sub He}/{upsilon}{sub E} to be expected for future reactor systems has been made. The experiments were carried out for neutral beam heated plasmas in the TEXTOR tokamak, at KFA/Julich. Helium was injected both as a short puff and continuously, and subsequently extracted with the Advanced Limiter Test-II pump limiter. The rate at which the He density decays has been determined with absolutely calibrated charge exchange spectroscopy, and compared with theoretical models, using the Multiple Impurity Species Transport (MIST) code. An analysis of energy confinement has been made with PPPL TRANSP code, to distinguish beam from thermal confinement, especially for low density cases. The ALT-II pump limiter system is found to exhaust the He with maximum exhaust efficiency (8 pumps) of {approximately}8%. We find 1<{upsilon}{sub He}/{upsilon}{sub E}<3.3 for the database of cases analysed to date. Analysis with the ITER TETRA systems code shows that these values would be adequate to achieve the required He concentration with the present ITER divertor He extraction system.

  8. Iterative guided image fusion

    Directory of Open Access Journals (Sweden)

    Alexander Toet

    2016-08-01

    Full Text Available We propose a multi-scale image fusion scheme based on guided filtering. Guided filtering can effectively reduce noise while preserving detail boundaries. When applied in an iterative mode, guided filtering selectively eliminates small scale details while restoring larger scale edges. The proposed multi-scale image fusion scheme achieves spatial consistency by using guided filtering both at the decomposition and at the recombination stage of the multi-scale fusion process. First, size-selective iterative guided filtering is applied to decompose the source images into approximation and residual layers at multiple spatial scales. Then, frequency-tuned filtering is used to compute saliency maps at successive spatial scales. Next, at each spatial scale binary weighting maps are obtained as the pixelwise maximum of corresponding source saliency maps. Guided filtering of the binary weighting maps with their corresponding source images as guidance images serves to reduce noise and to restore spatial consistency. The final fused image is obtained as the weighted recombination of the individual residual layers and the mean of the approximation layers at the coarsest spatial scale. Application to multiband visual (intensified and thermal infrared imagery demonstrates that the proposed method obtains state-of-the-art performance for the fusion of multispectral nightvision images. The method has a simple implementation and is computationally efficient.

  9. Corinth Canal, Greece

    Science.gov (United States)

    2006-01-01

    The Isthmus of Corinth has played a very important role in the history of Greece. It is the only land bridge between the country's north (Attica) and south (Peloponnese). It is a 6 km wide tongue of land separating the Gulf of Corinth from the Saronic Sea. Populations, armies and commodities have got to move through it. In the 6th century BCE, the Greeks built the Diolkos, a 10 meter-wide stone roadway to pull ships across the Isthmus on wooden cylinders and wheeled vehicles. In 1882, a canal was started and completed 11 years later. It is 6343 meters long, 25 meters wide, and 8 meters deep. With its 14 spectral bands from the visible to the thermal infrared wavelength region, and its high spatial resolution of 15 to 90 meters (about 50 to 300 feet), ASTER images Earth to map and monitor the changing surface of our planet. ASTER is one of five Earth-observing instruments launched December 18, 1999, on NASA's Terra satellite. The instrument was built by Japan's Ministry of Economy, Trade and Industry. A joint U.S./Japan science team is responsible for validation and calibration of the instrument and the data products. The broad spectral coverage and high spectral resolution of ASTER provides scientists in numerous disciplines with critical information for surface mapping, and monitoring of dynamic conditions and temporal change. Example applications are: monitoring glacial advances and retreats; monitoring potentially active volcanoes; identifying crop stress; determining cloud morphology and physical properties; wetlands evaluation; thermal pollution monitoring; coral reef degradation; surface temperature mapping of soils and geology; and measuring surface heat balance. The U.S. science team is located at NASA's Jet Propulsion Laboratory, Pasadena, Calif. The Terra mission is part of NASA's Science Mission Directorate. Size: 25.3 by 37.7 kilometers (15.7 by 23.4 miles) Location: 37.9 degrees North latitude, 23 degrees East longitude Orientation: North at top Image

  10. Fluidmechanics of semicircular canals revisited

    Science.gov (United States)

    Obrist, Dominik

    2008-05-01

    In this work we find the exact solution for the flow field in a semicircular canal which is the main sensor for angular motion in the human body. When the head is rotated the inertia of the fluid in the semicircular canal leads to a deflection of sensory hair cells which are part of a gelatinous structure called cupula. A modal expansion of the governing equation shows that the semicircular organ can be understood as a dynamic system governed by duct modes and a single cupular mode. We use this result to derive an explicit expression for the displacement of the cupula as a function of the angular motion of the head. This result shows in a mathematically and physically clean way that the semicircular canal is a transducer for angular velocity.

  11. Retention of Root Canal Posts

    DEFF Research Database (Denmark)

    Sahafi, A; Benetti, Ana Raquel; Flury, S;

    2015-01-01

    The aim of this study was to investigate the effect of the cement film thickness of a zinc phosphate or a resin cement on retention of untreated and pretreated root canal posts. Prefabricated zirconia posts (CosmoPost: 1.4 mm) and two types of luting cements (a zinc phosphate cement [DeTrey Zinc......] and a self-etch adhesive resin cement [Panavia F2.0]) were used. After removal of the crowns of 360 extracted premolars, canines, or incisors, the root canals were prepared with a parallel-sided drill system to three different final diameters. Half the posts did not receive any pretreatment. The other half...... received tribochemical silicate coating according to the manufacturer's instructions. Posts were then luted in the prepared root canals (n=30 per group). Following water storage at 37°C for seven days, retention of the posts was determined by the pull-out method. Irrespective of the luting cement...

  12. INSTRUMENTATION OF CURVED CANALS: A REVIEW

    Directory of Open Access Journals (Sweden)

    Senthil Kumar

    2013-02-01

    Full Text Available INTRODUCTION: Nature seldom draws a straight line. Nowhere is thi s more apparent than in the anatomy of teeth roots and root canal systems o f human teeth. Even teeth with straight roots can harbor severely curved canals. Canal shapi ng is a critical aspect of endodontic treatment because it influences the outcome of the subsequent phases of canal irrigation and filling and the success of the treatment itself. In fact, curved canals are the most common endodontic complexity 1 . The need for some manner of root canal preparation pri or to root canal filling has long been recognized as an essential step in endodontic t reatment. Concepts concerning the role and purpose of this canal preparation, however, have differ ed remarkably at different times in the development of endodontics and in the hands of diffe rent practitioners 2

  13. Iterated crowdsourcing dilemma game

    Science.gov (United States)

    Oishi, Koji; Cebrian, Manuel; Abeliuk, Andres; Masuda, Naoki

    2014-02-01

    The Internet has enabled the emergence of collective problem solving, also known as crowdsourcing, as a viable option for solving complex tasks. However, the openness of crowdsourcing presents a challenge because solutions obtained by it can be sabotaged, stolen, and manipulated at a low cost for the attacker. We extend a previously proposed crowdsourcing dilemma game to an iterated game to address this question. We enumerate pure evolutionarily stable strategies within the class of so-called reactive strategies, i.e., those depending on the last action of the opponent. Among the 4096 possible reactive strategies, we find 16 strategies each of which is stable in some parameter regions. Repeated encounters of the players can improve social welfare when the damage inflicted by an attack and the cost of attack are both small. Under the current framework, repeated interactions do not really ameliorate the crowdsourcing dilemma in a majority of the parameter space.

  14. 33 CFR 117.444 - Falgout Canal.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Falgout Canal. 117.444 Section 117.444 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Louisiana § 117.444 Falgout Canal. The draw of the LA 315 bridge across Falgout Canal, mile 3.1,...

  15. Developmental spinal canal stenosis and somatotype.

    OpenAIRE

    Nightingale, S.

    1989-01-01

    The hypothesis that somatotype and cervical spine developmental canal stenosis may be associated has been investigated by anthropometry and measurement of lateral projection cervical spine radiographs. A significant association of canal size with somatotype has been found such that those with developmentally narrow canals are more likely to have relatively shorter long-bones, particularly in the upper arm, and longer trunks.

  16. Canal Water Scarcity Hits Farmers

    Institute of Scientific and Technical Information of China (English)

    张忠潮

    2007-01-01

    Acute shortage of canal water for irrigation in this district has caused resentment among the farmers.The water is being released in the various channels for just one week in a month,which is not enough to meet the irrigation needs of the farmers who are preparing their fields for paddy

  17. The Dehiscent Facial Nerve Canal

    Directory of Open Access Journals (Sweden)

    Sertac Yetiser

    2012-01-01

    Full Text Available Accidental injury to the facial nerve where the bony canal defects are present may result with facial nerve dysfunction during otological surgery. Therefore, it is critical to know the incidence and the type of facial nerve dehiscences in the presence of normal development of the facial canal. The aim of this study is to review the site and the type of such bony defects in 144 patients operated for facial paralysis, myringoplasty, stapedotomy, middle ear exploration for sudden hearing loss, and so forth, other than chronic suppurative otitis media with or without cholesteatoma, middle ear tumors, and anomaly. Correlation of intraoperative findings with preoperative computerized tomography was also analyzed in 35 patients. Conclusively, one out of every 10 surgical cases may have dehiscence of the facial canal which has to be always borne in mind during surgical manipulation of the middle ear. Computerized tomography has some limitations to evaluate the dehiscent facial canal due to high false negative and positive rates.

  18. [Endodontic microbiology: antimicrobial canal medications].

    Science.gov (United States)

    Seltzer, S; Farber, P A

    1989-06-01

    Medicaments used for reducing or eliminating microorganisms from infected root canals include: irrigating solutions, such as sodium hypochlorite, urea peroxide and hydrogen peroxide, chloramine, iodine-potassium-iodide solution, and chlorhexidine solution. In addition, various intracanal drugs, such as calcium hydroxide and antibiotics, are in use. The characteristics of these drugs are discussed.

  19. Mandibular Second Premolar with Four Canals

    Directory of Open Access Journals (Sweden)

    Javad Ghiasi

    2015-09-01

    Full Text Available A mandibular second premolar with four canals is an interesting example of anatomic variations. This report describes a case of a mandibular second premolar with three roots and four canals (one mesiobuccal, two distobuccal and one lingual. The canals were prepared using K-files and irrigated with NaOCl (5.25% and normal saline as the final irrigant. The canals were filled laterally with gutta percha and AH26 sealer (De Trey, Dentsply, Switzerland. This case shows a rare anatomic configuration and points out the importance of looking for additional canals.

  20. 75 FR 39632 - Regulated Navigation Area; Gulf Intracoastal Waterway, Inner Harbor Navigation Canal, Harvey...

    Science.gov (United States)

    2010-07-12

    ..., Inner Harbor Navigation Canal, Harvey Canal, Algiers Canal, New Orleans, LA; Correction ACTION: Interim... Navigation Canal, Harvey Canal, Algiers Canal, New Orleans, LA into the Code of Federal Regulations....

  1. Some geometrical iteration methods for nonlinear equations

    Institute of Scientific and Technical Information of China (English)

    LU Xing-jiang; QIAN Chun

    2008-01-01

    This paper describes geometrical essentials of some iteration methods (e.g. Newton iteration,secant line method,etc.) for solving nonlinear equations and advances some geomet-rical methods of iteration that are flexible and efficient.

  2. The first fusion reactor: ITER

    Science.gov (United States)

    Campbell, D. J.

    2016-11-01

    Established by the signature of the ITER Agreement in November 2006 and currently under construction at St Paul-lez-Durance in southern France, the ITER project [1,2] involves the European Union (including Switzerland), China, India, Japan, the Russian Federation, South Korea and the United States. ITER (`the way' in Latin) is a critical step in the development of fusion energy. Its role is to provide an integrated demonstration of the physics and technology required for a fusion power plant based on magnetic confinement.

  3. PICARD ITERATION FOR NONSMOOTH EQUATIONS

    Institute of Scientific and Technical Information of China (English)

    Song-bai Sheng; Hui-fu Xu

    2001-01-01

    This paper presents an analysis of the generalized Newton method, approximate Newton methods, and splitting methods for solving nonsmooth equations from Picard iteration viewpoint. It is proved that the radius of the weak Jacobian (RGJ) of Picard iteration function is equal to its least Lipschitz constant. Linear convergence or superlinear convergence results can be obtained provided that RGJ of the Picard iteration function at a solution point is less than one or equal to zero. As for applications, it is pointed out that the approximate Newton methods, the generalized Newton method for piecewise C1problems and splitting methods can be explained uniformly with the same viewpoint.

  4. Scalloping at the lumbosacral canal

    Energy Technology Data Exchange (ETDEWEB)

    Reinhardt, R.

    1987-07-01

    Scalloping is an indentation of the dorsal side of the vertebral body (anterior wall of the lumbosacral or sacral canal) which typically involves several adjacent lumbal vertebral body segments and the anterior wall of the canalis sacralis. Occurrence without underlying disease is rare; it occurs most frequently with chondrodystrophy, neurofibromatosis, Morquio's syndrome, Hurler's syndrome, acromegaly, Ehlers-Danlos syndrome, Marfan's syndrome, cysts, tumors and in peridural lipomas.

  5. Existence test for asynchronous interval iterations

    DEFF Research Database (Denmark)

    Madsen, Kaj; Caprani, O.; Stauning, Ole

    1997-01-01

    as a synchronous (sequential) interval iteration:In each iteration step all components of the iterate are calculatedbased on the previous iterate. In this case it is straight forward to base simple interval existence and non-existencetests on the calculations done in each step of the iteration. The search can also...... be performed as an asynchronous (parallel) iteration: Only a few components are changed in each stepand this calculation is in general based on components from differentprevious iterates. For the asynchronous iteration it turns out thatsimple tests of existence and non-existence can be based...

  6. Updated safety analysis of ITER

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, Neill, E-mail: neill.taylor@iter.org [ITER Organization, CS 90 046, 13067 St Paul Lez Durance Cedex (France); Baker, Dennis; Ciattaglia, Sergio; Cortes, Pierre; Elbez-Uzan, Joelle; Iseli, Markus; Reyes, Susana; Rodriguez-Rodrigo, Lina; Rosanvallon, Sandrine; Topilski, Leonid [ITER Organization, CS 90 046, 13067 St Paul Lez Durance Cedex (France)

    2011-10-15

    An updated version of the ITER Preliminary Safety Report has been produced and submitted to the licensing authorities. It is revised and expanded in response to requests from the authorities after their review of an earlier version in 2008, to reflect enhancements in ITER safety provisions through design changes, to incorporate new and improved safety analyses and to take into account other ITER design evolution. The updated analyses show that changes to the Tokamak cooling water system design have enhanced confinement and reduced potential radiological releases as well as removing decay heat with very high reliability. New and updated accident scenario analyses, together with fire and explosion risk analyses, have shown that design provisions are sufficient to minimize the likelihood of accidents and reduce potential consequences to a very low level. Taken together, the improvements provided a stronger demonstration of the very good safety performance of the ITER design.

  7. Iterative solution of linear systems

    Science.gov (United States)

    Freund, Roland W.; Golub, Gene H.; Nachtigal, Noel M.

    1992-01-01

    Recent advances in the field of iterative methods for solving large linear systems are reviewed. The main focus is on developments in the area of conjugate gradient-type algorithms and Krylov subspace methods for nonHermitian matrices.

  8. Cooperation between CERN and ITER

    CERN Multimedia

    2008-01-01

    CERN and the International Fusion Organisation ITER have just signed a first cooperation agreeement. Kaname Ikeda, the Director-General of the International Fusion Energy Organisation (ITER) (on the right) and Robert Aymar, Director-General of CERN, signing the agreement.The Director-General of the International Fusion Energy Organization, Mr Kaname Ikeda, and CERN Director-General, Robert Aymar, signed a cooperation agreement at a meeting on the Meyrin site on Thursday 6 March. One of the main purposes of this agreement is for CERN to give ITER the benefit of its experience in the field of technology as well as in administrative domains such as finance, procurement, human resources and informatics through the provision of consultancy services. Currently in its start-up phase at its Cadarache site, 70 km from Marseilles (France), ITER will focus its research on the scientific and technical feasibility of using fusion energy as a fu...

  9. The ITER project construction status

    Science.gov (United States)

    Motojima, O.

    2015-10-01

    The pace of the ITER project in St Paul-lez-Durance, France is accelerating rapidly into its peak construction phase. With the completion of the B2 slab in August 2014, which will support about 400 000 metric tons of the tokamak complex structures and components, the construction is advancing on a daily basis. Magnet, vacuum vessel, cryostat, thermal shield, first wall and divertor structures are under construction or in prototype phase in the ITER member states of China, Europe, India, Japan, Korea, Russia, and the United States. Each of these member states has its own domestic agency (DA) to manage their procurements of components for ITER. Plant systems engineering is being transformed to fully integrate the tokamak and its auxiliary systems in preparation for the assembly and operations phase. CODAC, diagnostics, and the three main heating and current drive systems are also progressing, including the construction of the neutral beam test facility building in Padua, Italy. The conceptual design of the Chinese test blanket module system for ITER has been completed and those of the EU are well under way. Significant progress has been made addressing several outstanding physics issues including disruption load characterization, prediction, avoidance, and mitigation, first wall and divertor shaping, edge pedestal and SOL plasma stability, fuelling and plasma behaviour during confinement transients and W impurity transport. Further development of the ITER Research Plan has included a definition of the required plant configuration for 1st plasma and subsequent phases of ITER operation as well as the major plasma commissioning activities and the needs of the accompanying R&D program to ITER construction by the ITER parties.

  10. ITER leader to head CERN

    CERN Multimedia

    Feder, Toni

    2003-01-01

    After successfully chairing an external review committee for CERN last year, Robert Aymar will leave ITER to become director general of the European particle physics laboratory rom 2004. Before ITER he also successfully managed the startup or Tore Supra. He will attempt to ensure that the LHC begins operating in 2007 - two years late - and is paid for by 2010 and will also start the planning for life after the LHC (1 page)

  11. Nested Canalizing Functions and Their Networks

    CERN Document Server

    Kadelka, Claus; Adeyeye, John O; Laubenbacher, Reinhard

    2014-01-01

    The concept of a nested canalizing Boolean function has been studied over the last decade in the context of understanding the regulatory logic of molecular interaction networks, such as gene regulatory networks. Such networks are predominantly governed by nested canalizing functions. Derrida values are frequently used to analyze the robustness of a Boolean network to perturbations. This paper introduces closed formulas for the calculation of Derrida values of networks governed by Boolean nested canalizing functions, which previously required extensive simulations. Recently, the concept of nested canalizing functions has been generalized to include multistate functions, and a recursive formula has been derived for their number, as a function of the number of variables. This paper contains a detailed analysis of the class of nested canalizing functions over an arbitrary finite field. In addition, the concept of nested canalization is further generalized and closed formulas for the number of such generalized fun...

  12. Stability of guest molecules in urea canal complexes by canal polymerization

    Energy Technology Data Exchange (ETDEWEB)

    Yoshii, Fumio; Makuuchi, Keizo [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment

    1995-03-01

    It was found that various organic materials are attracted into urea canal by hexanediol diacrylate (HDDA) and long chain compounds. This means that materials which does not form complex by itself are induced in canal by HDDA and long chain compounds. To include with stability perfumes, insecticides, attractants and repellents in urea canal, leaf alcohol was used as a model compound for guest molecules in the canal. The leaf alcohol from the canal released gradually over many days and the release was inhibited for 15 days by long chain compounds and for 30 days by polymerized HDDA after irradiation. After releasing, the leaf alcohol in the canal remained 25 % stable for long chain compounds and 40 % for polymerized HDDA. The dose required for stabilization of leaf alcohol in the urea canal by canal polymerization of HDDA was 30 kGy. (author).

  13. Canals, DMADCanals-Irrigation canals in Millard Co., Published in 2007, Millard County.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Canals dataset, was produced all or in part from Other information as of 2007. It is described as 'DMADCanals-Irrigation canals in Millard Co.'. Data by this...

  14. MRI Findings in Spinal Canal Stenosis

    OpenAIRE

    Maryam Barzin

    2010-01-01

    Spinal canal stenosis results from progressive narrowing of the central spinal canal and the lateral recesses. Primary (congenital) lumbar spinal stenosis is associated with achondroplastic dwarfism. The spinal canal may become narrowed by bulging or protrusion of the intervertebral disc annulus, herniation of the nucleus pulposus posteriorly, thickening of the posterior longitudinal ligament, hypertrophy of the facet joints, hypertrophy of the ligamentum flavum, epidural fat deposition, spon...

  15. The World's Largest Steel Casting Poured Successfully

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ The world's largest steel casting -- the upper beam (or the top head) for free forging oil hydraulic press with a 18,000-ton force capacity, was poured successfully by CITIC Heavy Machinery Co., Ltd. (CITICHM) on May 22, 2008. This head piece is 11.95 meters long, 3.8 meters wide, 4.59 meters high and about 520 tons in gross weight. Pouring is the most important and critical step during its manufacturing process. The production of this huge casting requires about 830 tons of refined molten steel from 10 smelting furnaces and pouring with six ladles into the mold cavity at one time, which made it currently the world's largest steel casting poured and the most one-time molten steel organized.

  16. ITER Central Solenoid Module Fabrication

    Energy Technology Data Exchange (ETDEWEB)

    Smith, John [General Atomics, San Diego, CA (United States)

    2016-09-23

    The fabrication of the modules for the ITER Central Solenoid (CS) has started in a dedicated production facility located in Poway, California, USA. The necessary tools have been designed, built, installed, and tested in the facility to enable the start of production. The current schedule has first module fabrication completed in 2017, followed by testing and subsequent shipment to ITER. The Central Solenoid is a key component of the ITER tokamak providing the inductive voltage to initiate and sustain the plasma current and to position and shape the plasma. The design of the CS has been a collaborative effort between the US ITER Project Office (US ITER), the international ITER Organization (IO) and General Atomics (GA). GA’s responsibility includes: completing the fabrication design, developing and qualifying the fabrication processes and tools, and then completing the fabrication of the seven 110 tonne CS modules. The modules will be shipped separately to the ITER site, and then stacked and aligned in the Assembly Hall prior to insertion in the core of the ITER tokamak. A dedicated facility in Poway, California, USA has been established by GA to complete the fabrication of the seven modules. Infrastructure improvements included thick reinforced concrete floors, a diesel generator for backup power, along with, cranes for moving the tooling within the facility. The fabrication process for a single module requires approximately 22 months followed by five months of testing, which includes preliminary electrical testing followed by high current (48.5 kA) tests at 4.7K. The production of the seven modules is completed in a parallel fashion through ten process stations. The process stations have been designed and built with most stations having completed testing and qualification for carrying out the required fabrication processes. The final qualification step for each process station is achieved by the successful production of a prototype coil. Fabrication of the first

  17. Modelling of Buckingham Canal water quality.

    Science.gov (United States)

    Abbasi, S A; Khan, F I; Sentilvelan, K; Shabudeen, A

    2002-10-01

    The paper presents a case study of the modelling of the water quality of a canal situated in a petrochemical industrial complex, which receives wastewaters from Madras Refineries Limited (MRL), and Madras Fertilizers Limited (MFL). The canal well known Buckingham Canal which passes through Chennai (Madras), India has been modelled using the software QUAL2E-UNCAS. After testing and validation of the model, simulations have been carried out. The exercise enables forecasting the impacts of different seasons, base flows, and waste water inputs on the water quality of the Buckingham Canal. It also enables development of water management strategies.

  18. A recursion identity for formal iterated logarithms and iterated exponentials

    CERN Document Server

    Robinson, Thomas J

    2010-01-01

    We prove a recursive identity involving formal iterated logarithms and formal iterated exponentials. These iterated logarithms and exponentials appear in a natural extension of the logarithmic formal calculus used in the study of logarithmic intertwining operators and logarithmic tensor category theory for modules for a vertex operator algebra. This extension has a variety of interesting arithmetic properties. We develop one such result here, the aforementioned recursive identity. We have applied this identity elsewhere to certain formal series expansions related to a general formal Taylor theorem and these series expansions in turn yield a sequence of combinatorial identities which have as special cases certain classical combinatorial identities involving (separately) the Stirling numbers of the first and second kinds.

  19. Narrow, duplicated internal auditory canal

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, T. [Servico de Neurorradiologia, Hospital Garcia de Orta, Avenida Torrado da Silva, 2801-951, Almada (Portugal); Shayestehfar, B. [Department of Radiology, UCLA Oliveview School of Medicine, Los Angeles, California (United States); Lufkin, R. [Department of Radiology, UCLA School of Medicine, Los Angeles, California (United States)

    2003-05-01

    A narrow internal auditory canal (IAC) constitutes a relative contraindication to cochlear implantation because it is associated with aplasia or hypoplasia of the vestibulocochlear nerve or its cochlear branch. We report an unusual case of a narrow, duplicated IAC, divided by a bony septum into a superior relatively large portion and an inferior stenotic portion, in which we could identify only the facial nerve. This case adds support to the association between a narrow IAC and aplasia or hypoplasia of the vestibulocochlear nerve. The normal facial nerve argues against the hypothesis that the narrow IAC is the result of a primary bony defect which inhibits the growth of the vestibulocochlear nerve. (orig.)

  20. Exponential wealth distribution : a new approach from functional iteration theory*

    Directory of Open Access Journals (Sweden)

    López José-Luis

    2012-08-01

    Full Text Available Different approaches are possible in order to derive the exponential regime in statistical systems. Here, a new functional equation is proposed in an economic context to explain the wealth exponential distribution. Concretely, the new iteration [1] given by egin{equation} f_{n+1}(x = int!!int_{u+v>x},{f_n(uf_n(vover u+v} ; {mathrm d}u{mathrm d}v ,. onumber label{syst1} end{equation} f n + 1 ( x = ∫ ∫ u + v > x   f n ( u f n ( v u + v d u d v   . It is found that the exponential distribution is a stable fixed point of this functional iteration equation. From this point of view, it is easily understood why the exponential wealth distribution (or by extension, other kind of distributions is asymptotically obtained in different multi-agent economic models. Différentes approches pour dériver le régime asymptotique exponentiel dans les systèmes statistiques sont possibles. Ici une nouvelle équation fonctionnelle est proposée, dans le cadre des systèmes économiques, pour expliquer la distribution exponentielle. Nous montrons que cette distribution est le seul point fixe vers lequel la dynamique de cette équation fonctionnelle évolue quand l’itération va vers l’infini. De ce point de vue, il est facile de comprendre l’ubiquité de cette distribution (ou d’autres en différents problèmes statistiques réels.

  1. Relaxation Criteria for Iterated Traffic Simulations

    Science.gov (United States)

    Kelly, Terence; Nagel, Kai

    Iterative transportation microsimulations adjust traveler route plans by iterating between a microsimulation and a route planner. At each iteration, the route planner adjusts individuals' route choices based on the preceding microsimulations. Empirically, this process yields good results, but it is usually unclear when to stop the iterative process when modeling real-world traffic. This paper investigates several criteria to judge relaxation of the iterative process, emphasizing criteria related to traveler decision-making.

  2. A Linear Iterative Unfolding Method

    CERN Document Server

    Laszlo, Andras

    2011-01-01

    A frequently faced task in experimental physics is to measure the probability distribution of some quantity. Often this quantity to be measured is smeared by a non-ideal detector response or by some physical process. The procedure of removing this smearing effect from the measured distribution is called unfolding, and is a delicate problem in signal processing. Due to the numerical ill-posedness of this task, various methods were invented which, given some assumptions on the initial probability distribution, try to regularize the problem. Most of these methods definitely introduce bias on the estimate of the initial probability distribution. We propose a linear iterative method (motivated by the Neumann series / Landweber iteration known in functional analysis), which has the advantage that no assumptions on the initial probability distribution is needed, and the only regularization parameter is the stopping order of the iteration. Convergence is proved under certain quite general conditions, which hold for p...

  3. RF TBMs for ITER tests

    Energy Technology Data Exchange (ETDEWEB)

    Kirillov, I.R. [D.V. Efremov Scientific Research Institute of Electrophysical Apparatus, 196641 St. Petersburg (Russian Federation)]. E-mail: kirillir@sintez.niiefa.spb.su; Shatalov, G.E. [Russian Research Center, Kurchatov Institute, Kurchatov Square 1, 123182 Moscow (Russian Federation); Strebkov, YU.S. [Dollezhal Research and Development Institute of Power Engineering, P.O. Box 788, 101000 Moscow (Russian Federation)

    2006-02-15

    Following the DEMO design analysis, two test blanket modules (TBM) were chosen in the RF for the development and testing in ITER: ceramic helium-cooled TBM and lithium self-cooled TBM. In the first one, lithium containing ceramics is used for tritium breeding, helium is used as a coolant and purge gas for tritium extraction, beryllium-as a multiplier. Ferritic steel is a structure material. In the second one lithium is used as tritium breeder and a coolant, and vanadium alloy of V-Cr-Ti system as a structure material. Conceptual designs of both TBMs and ancillary systems for their tests in ITER, strategy of tests, key R and D issues for both concepts are summarized. An international collaboration in R and D, development and testing of TBMs is of great importance due to shortage of testing space in ITER and due to high cost of the program.

  4. [Upper lateral incisor with 2 canals].

    Science.gov (United States)

    Fabra Campos, H

    1991-01-01

    Clinical case summary of the patient with an upper lateral incisor with two root canals. The suspicion that there might be an anatomic anomaly in the root that includes a complex root canal system was made when an advanced radicular groove was detected in the lingual surface or an excessively enlarged cingulum.

  5. Bilateral duplication of the internal auditory canal

    Energy Technology Data Exchange (ETDEWEB)

    Weon, Young Cheol; Kim, Jae Hyoung; Choi, Sung Kyu [Seoul National University College of Medicine, Department of Radiology, Seoul National University Bundang Hospital, Seongnam-si (Korea); Koo, Ja-Won [Seoul National University College of Medicine, Department of Otolaryngology, Seoul National University Bundang Hospital, Seongnam-si (Korea)

    2007-10-15

    Duplication of the internal auditory canal is an extremely rare temporal bone anomaly that is believed to result from aplasia or hypoplasia of the vestibulocochlear nerve. We report bilateral duplication of the internal auditory canal in a 28-month-old boy with developmental delay and sensorineural hearing loss. (orig.)

  6. 33 CFR 117.285 - Grand Canal.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Grand Canal. 117.285 Section 117.285 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Florida § 117.285 Grand Canal. (a) The draw of the Lansing Island bridge, mile 0.7, shall open on...

  7. 33 CFR 117.453 - Houma Canal.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Houma Canal. 117.453 Section 117.453 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Louisiana § 117.453 Houma Canal. The draw of the S3197 bridge, mile 1.7 at Houma, shall open on signal...

  8. 33 CFR 117.438 - Company Canal.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Company Canal. 117.438 Section 117.438 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Louisiana § 117.438 Company Canal. (a) The draw of the S1 bridge, mile 0.4 at Lockport, shall open...

  9. Neuronal hyperplasia in the anal canal

    DEFF Research Database (Denmark)

    Fenger, C; Schrøder, H D

    1990-01-01

    In a consecutive series of minor surgical specimens from the anal canal, neuronal hyperplasia was found in nine of 56 haemorrhoidectomy specimens and in four of 23 fibrous polyps. In an additional series of 14 resections of the anal canal, neuronal hyperplasia was present in six cases, of which...

  10. 33 CFR 117.787 - Gowanus Canal.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Gowanus Canal. 117.787 Section 117.787 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements New York § 117.787 Gowanus Canal. The draws of the Ninth Street Bridge, mile 1.4, the Third...

  11. Blending Canal Surfaces Based on PH Curves

    Institute of Scientific and Technical Information of China (English)

    Chen-Dong Xu; Fa-Lai Chen

    2005-01-01

    In this paper, a new method for blending two canal surfaces is proposed. The blending surface is itself a generalized canal surface, the spine curve of which is a PH (Pythagorean-Hodograph) curve. The blending surface possesses an attractive property - its representation is rational. The method is extensible to blend general surfaces as long as the blending boundaries are well-defined.

  12. 33 CFR 117.445 - Franklin Canal.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Franklin Canal. 117.445 Section 117.445 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Louisiana § 117.445 Franklin Canal. The draw of the Chatsworth Bridge, mile 4.8 at Franklin, shall...

  13. 33 CFR 117.1045 - Hood Canal.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Hood Canal. 117.1045 Section 117.1045 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Washington § 117.1045 Hood Canal. The draw of the Washington State pontoon highway bridge near...

  14. DESIGN OF SEDIMENT TRANSPORTING CANAL SECTIONS

    Institute of Scientific and Technical Information of China (English)

    Prabhata K.SWAMEE; Nimisha SWAMEE

    2004-01-01

    Design equations for minimum area or maximum velocity canal-sections for transport of bulk sediment carried by water have been obtained. Such canals are economically feasible in the terrain where large slopes are available. The design procedure is illustrated by a practical example.

  15. Rollout Sampling Approximate Policy Iteration

    CERN Document Server

    Dimitrakakis, Christos

    2008-01-01

    Several researchers have recently investigated the connection between reinforcement learning and classification. We are motivated by proposals of approximate policy iteration schemes without value functions which focus on policy representation using classifiers and address policy learning as a supervised learning problem. This paper proposes variants of an improved policy iteration scheme which addresses the core sampling problem in evaluating a policy through simulation as a multi-armed bandit machine. The resulting algorithm offers comparable performance to the previous algorithm achieved, however, with significantly less computational effort. An order of magnitude improvement is demonstrated experimentally in two standard reinforcement learning domains: inverted pendulum and mountain-car.

  16. Tissue engineering in endodontics: root canal revascularization.

    Science.gov (United States)

    Palit Madhu Chanda; Hegde, K Sundeep; Bhat, Sham S; Sargod, Sharan S; Mantha, Somasundar; Chattopadhyay, Sayan

    2014-01-01

    Root canal revascularization attempts to make necrotic tooth alive by the use of certain simple clinical protocols. Earlier apexification was the treatment of choice for treating and preserving immature permanent teeth that have lost pulp vitality. This procedure promoted the formation of apical barrier to seal the root canal of immature teeth and nonvital filling materials contained within root canal space. However with the success of root canal revascularization to regenerate the pulp dentin complex of necrotic immature tooth has made us to rethink if apexification is at the beginning of its end. The objective of this review is to discuss the new concepts of tissue engineering in endodontics and the clinical steps of root canal revascularization.

  17. Clinical management of infected root canal dentin.

    Science.gov (United States)

    Love, R M

    1996-08-01

    Several hundred different species of bacteria are present in the human intraoral environment. Bacterial penetration of root canal dentin occurs when bacteria invade the root canal system. These bacteria may constitute a reservoir from which root canal reinfection may occur during or after endodontic treatment. The learning objective of this article is to review endodontic microbiology, update readers on the role of bacteria in pulp and periapical disease, and discuss the principles of management of infected root canal dentin. Complete debridement, removal of microorganisms and affected dentin, and chemomechanical cleansing of the root canal are suggested as being the cornerstones of successful endodontic therapy, followed by intracanal medication to remove residual bacteria, when required.

  18. Type III apical transportation of root canal

    Directory of Open Access Journals (Sweden)

    Shiv P Mantri

    2012-01-01

    Full Text Available Procedural accidents leading to complications such as canal transportation have been ascribed to inapt cleaning and shaping concepts. Canal transportation is an undesirable deviation from the natural canal path. Herewith a case of apical transportation of root canal resulting in endodontic retreatment failure and its management is presented. A healthy 21-year-old young male presented discomfort and swelling associated with painful endodontically retreated maxillary incisor. Radiograph revealed periradicular radiolucency involving underfilled 11 and overfilled 12. Insufficiently obturated 11 exhibited apical transportation of canal. This type III transportation was treated by periradicular surgery and repair using white mineral trioxide aggregate (MTA. Comfortable asymptomatic patient presented uneventful healing at third and fourth month recall visits. A decrease in the size of radiolucency in radiograph supported the clinical finding. In the present case, MTA is useful in repairing the transportation defect. The result of these procedures is predictable and successful.

  19. MRI Findings in Spinal Canal Stenosis

    Directory of Open Access Journals (Sweden)

    Maryam Barzin

    2010-05-01

    Full Text Available Spinal canal stenosis results from progressive narrowing of the central spinal canal and the lateral recesses. Primary (congenital lumbar spinal stenosis is associated with achondroplastic dwarfism. The spinal canal may become narrowed by bulging or protrusion of the intervertebral disc annulus, herniation of the nucleus pulposus posteriorly, thickening of the posterior longitudinal ligament, hypertrophy of the facet joints, hypertrophy of the ligamentum flavum, epidural fat deposition, spondylosis of the intervertebral disc margins and uncovertebral joint hypertrophy in the neck. The central canal and the neurorecess may be compromised by tumor infiltration, such as metastatic disease, or by infectious spondylitis."nAP diameter of the normal adult cervical canal has a mean value of 17-18 mm at vertebral levels C3-5. The lower cervical canal measures 12-14 mm. Cervical stenosis is associated with an AP diameter of less than 10 mm. The thoracic spinal canal varies from 12 to 14 mm in diameter in the adult. The diameter of the normal lumbar spinal canal varies from 15 to 27 mm. Lumbar stenosis results from a spinal canal diameter of less than 12 mm in some patients; a diameter of 10 mm is definitely stenotic."nSpinal MRI is the most suitable technique for the diagnosis of spinal stenosis. The examination should be performed using thin sections (3 mm and high resolution, including the axial and sagittal planes using T1-weighted, proton-density, and T2-weighted techniques. The bony and osteophytic components are seen best using a T2-weighted gradient-echo technique."nOn MRI, findings of spinal stenosis have a variable presentation depending on the specific disease. The goal of spinal imaging is to localize the site and level of disease and to help differentiate between conditions in which patients require surgery or conservative treatment."nIn this presentation, different kinds of spinal canal stenosis and their MRI findings would be discussed.

  20. Gradually varied flow in compound open channels; Flujo gradualmente variado en canales de seccion compuesta

    Energy Technology Data Exchange (ETDEWEB)

    Sotela Avila, Gilberto [Universidad Nacional Autonoma de Mexico (Mexico)

    2001-03-01

    The author shows that the computation of gradually-varied-flow profiles in prismatic compound channels involves the solution of the dynamic equation, but using the compound channel Froude number defined by Blalock and Sturm. The same equation is used for non-prismatic channels by dividing the channel into short reaches and carrying the computation step by step through an iterative process. [Spanish] El autor demuestra que los perfiles del flujo gradualmente variado en canales prismaticos de seccion compuesta se pueden determinar mediante la integracion de la llamada ecuacion dinamica, pero usando el numero de Froude definido por Blalock y Sturm para este tipo de canales. Cuando no son prismaticos, tambien se aplica la ecuacion de la energia por tramos y el calculo sigue un proceso iterativo una vez definidos los tirantes criticos multiples y la zona en que se desarrolla el perfil.

  1. Energetic ions in ITER plasmas

    Science.gov (United States)

    Pinches, S. D.; Chapman, I. T.; Lauber, Ph. W.; Oliver, H. J. C.; Sharapov, S. E.; Shinohara, K.; Tani, K.

    2015-02-01

    This paper discusses the behaviour and consequences of the expected populations of energetic ions in ITER plasmas. It begins with a careful analytic and numerical consideration of the stability of Alfvén Eigenmodes in the ITER 15 MA baseline scenario. The stability threshold is determined by balancing the energetic ion drive against the dominant damping mechanisms and it is found that only in the outer half of the plasma ( r / a > 0.5 ) can the fast ions overcome the thermal ion Landau damping. This is in spite of the reduced numbers of alpha-particles and beam ions in this region but means that any Alfvén Eigenmode-induced redistribution is not expected to influence the fusion burn process. The influence of energetic ions upon the main global MHD phenomena expected in ITER's primary operating scenarios, including sawteeth, neoclassical tearing modes and Resistive Wall Modes, is also reviewed. Fast ion losses due to the non-axisymmetric fields arising from the finite number of toroidal field coils, the inclusion of ferromagnetic inserts, the presence of test blanket modules containing ferromagnetic material, and the fields created by the Edge Localised Mode (ELM) control coils in ITER are discussed. The greatest losses and associated heat loads onto the plasma facing components arise due to the use of the ELM control coils and come from neutral beam ions that are ionised in the plasma edge.

  2. Cooperation between CERN and ITER

    CERN Multimedia

    CERN Audiovisual Service

    2008-01-01

    CERN and the International Fusion Organisation ITER have just signed a first cooperation agreeement. The Director-General of the International Fusion Energy Organization, Mr Kaname Ikeda, and CERN Director-General, Robert Aymar, signed a cooperation agreement at a meeting on the Meyrin site on Thursday 6 March.

  3. Bounded Fixed-Point Iteration

    DEFF Research Database (Denmark)

    Nielson, Hanne Riis; Nielson, Flemming

    1992-01-01

    they obtain a quadratic bound. These bounds are shown to be tight. Specializing the case of strict and additive functions to functionals of a form that would correspond to iterative programs they show that a linear bound is tight. This is related to several analyses studied in the literature (including...

  4. Energetic ions in ITER plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Pinches, S. D. [ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St Paul-lez-Durance Cedex (France); Chapman, I. T.; Sharapov, S. E. [CCFE, Culham Science Centre, Abingdon, Oxfordshire OX14 3DB (United Kingdom); Lauber, Ph. W. [Max-Planck-Institut für Plasmaphysik, EURATOM-Association, Boltzmanstraße 2, D-85748 Garching (Germany); Oliver, H. J. C. [H H Wills Physics Laboratory, University of Bristol, Royal Fort, Tyndall Avenue, Bristol BS8 1TL (United Kingdom); CCFE, Culham Science Centre, Abingdon, Oxfordshire OX14 3DB (United Kingdom); Shinohara, K. [Japan Atomic Energy Agency, Naka, Ibaraki 311-0193 (Japan); Tani, K. [Nippon Advanced Technology Co., Ltd, Naka, Ibaraki 311-0102 (Japan)

    2015-02-15

    This paper discusses the behaviour and consequences of the expected populations of energetic ions in ITER plasmas. It begins with a careful analytic and numerical consideration of the stability of Alfvén Eigenmodes in the ITER 15 MA baseline scenario. The stability threshold is determined by balancing the energetic ion drive against the dominant damping mechanisms and it is found that only in the outer half of the plasma (r/a>0.5) can the fast ions overcome the thermal ion Landau damping. This is in spite of the reduced numbers of alpha-particles and beam ions in this region but means that any Alfvén Eigenmode-induced redistribution is not expected to influence the fusion burn process. The influence of energetic ions upon the main global MHD phenomena expected in ITER's primary operating scenarios, including sawteeth, neoclassical tearing modes and Resistive Wall Modes, is also reviewed. Fast ion losses due to the non-axisymmetric fields arising from the finite number of toroidal field coils, the inclusion of ferromagnetic inserts, the presence of test blanket modules containing ferromagnetic material, and the fields created by the Edge Localised Mode (ELM) control coils in ITER are discussed. The greatest losses and associated heat loads onto the plasma facing components arise due to the use of the ELM control coils and come from neutral beam ions that are ionised in the plasma edge.

  5. Iterative Specialisation of Horn Clauses

    DEFF Research Database (Denmark)

    Nielsen, Christoffer Rosenkilde; Nielson, Flemming; Nielson, Hanne Riis

    2008-01-01

    We present a generic algorithm for solving Horn clauses through iterative specialisation. The algorithm is generic in the sense that it can be instantiated with any decidable fragment of Horn clauses, resulting in a solution scheme for general Horn clauses that guarantees soundness and terminatio...

  6. Iterative method for interferogram processing

    Science.gov (United States)

    Kotlyar, Victor V.; Seraphimovich, P. G.; Zalyalov, Oleg K.

    1994-12-01

    We have developed and numerically evaluated an iterative algorithm for interferogram processing including the Fourier-transform method, the Gerchberg-Papoulis algorithm and Wiener's filter-based regularization used in combination. Using a signal-to-noise ratio not less than 1, it has been possible to reconstruct the phase of an object field with accuracy better than 5%.

  7. Active beam spectroscopy for ITER

    Energy Technology Data Exchange (ETDEWEB)

    Hellermann, M.G. von, E-mail: mgvh@jet.u [FOM Institute Rijnhuizen, Euratom Association, 3430BE Nieuwegein (Netherlands); Barnsley, R. [ITER Organization, 13108 St.-Paul-Lez-Durance, Cadarache (France); Biel, W. [Institut fuer Energieforschung, Plasmaphysik, Forschungszentrum Juelich, Euratom Association, 52425 Juelich (Germany); Delabie, E. [FOM Institute Rijnhuizen, Euratom Association, 3430BE Nieuwegein (Netherlands); Hawkes, N. [Culham Centre for Fusion Energy, Euratom Association, Culham OX14 3DB (United Kingdom); Jaspers, R. [FOM Institute Rijnhuizen, Euratom Association, 3430BE Nieuwegein (Netherlands); Johnson, D. [Princeton Plasma Physics Laboratory, Princeton, NJ-08548 (United States); Klinkhamer, F. [TNO Science and Industry, Stieltjesweg 1, 2628CK Delft (Netherlands); Lischtschenko, O. [FOM Institute Rijnhuizen, Euratom Association, 3430BE Nieuwegein (Netherlands); Marchuk, O. [Institut fuer Energieforschung, Plasmaphysik, Forschungszentrum Juelich, Euratom Association, 52425 Juelich (Germany); Schunke, B. [ITER Organization, 13108 St.-Paul-Lez-Durance, Cadarache (France); Singh, M.J. [Institute for Plasma Research, Bhat, Gandhinagar, Gurajat 384828 (India); Snijders, B. [TNO Science and Industry, Stieltjesweg 1, 2628CK Delft (Netherlands); Summers, H.P. [Culham Centre for Fusion Energy, Euratom Association, Culham OX14 3DB (United Kingdom); Thomas, D. [ITER Organization, 13108 St.-Paul-Lez-Durance, Cadarache (France); Tugarinov, S. [TRINITI Troitsk, Moscow Region 142092 (Russian Federation); Vasu, P. [Institute for Plasma Research, Bhat, Gandhinagar, Gurajat 384828 (India)

    2010-11-11

    Since the first feasibility studies of active beam spectroscopy on ITER in 1995 the proposed diagnostic has developed into a well advanced and mature system. Substantial progress has been achieved on the physics side including comprehensive performance studies based on an advanced predictive code, which simulates active and passive features of the expected spectral ranges. The simulation has enabled detailed specifications for an optimized instrumentation and has helped to specify suitable diagnostic neutral beam parameters. Four ITER partners share presently the task of developing a suite of ITER active beam diagnostics, which make use of the two 0.5 MeV/amu 18 MW heating neutral beams and a dedicated 0.1 MeV/amu, 3.6 MW diagnostic neutral beam. The IN ITER team is responsible for the DNB development and also for beam physics related aspects of the diagnostic. The RF will be responsible for edge CXRS system covering the outer region of the plasma (1>r/a>0.4) using an equatorial observation port, and the EU will develop the core CXRS system for the very core (0ITER environment. Additionally, an essential change of the orientation of the DNB injection angle and specification of suitable blanket aperture has been made to avoid trapped particle damage to the first wall.

  8. An Iterative Approach for Distributed Model Predictive Control of Irrigation Canals

    NARCIS (Netherlands)

    Doan, D.; Keviczky, T.; Negenborn, R.R.; De Schutter, B.

    2009-01-01

    Optimization techniques have played a fundamental role in designing automatic control systems for the most part of the past half century. This dependence is ever more obvious in today’s wide-spread use of online optimization-based control methods, such as Model Predictive Control (MPC) [1]. The abil

  9. An Iterative Approach for Distributed Model Predictive Control of Irrigation Canals

    OpenAIRE

    Doan, D.; Keviczky, T.; Negenborn, R.R.; De Schutter, B.

    2009-01-01

    Optimization techniques have played a fundamental role in designing automatic control systems for the most part of the past half century. This dependence is ever more obvious in today’s wide-spread use of online optimization-based control methods, such as Model Predictive Control (MPC) [1]. The ability to capture process constraints and characterize comprehensive economic objective functions has made MPC the industry standard for controlling complex systems.

  10. Canals in Milky Way radio polarization maps

    CERN Document Server

    Fletcher, A; Fletcher, Andrew; Shukurov, Anvar

    2006-01-01

    Narrow depolarized canals are common in maps of the polarized synchrotron emission of the Milky Way. Two physical effects that can produce these canals have been identified: the presence of Faraday rotation measure ($\\RM$) gradients in a foreground screen and the cumulative cancellation of polarization known as differential Faraday rotation. We show that the behaviour of the Stokes parameters $Q$ and $U$ in the vicinity of a canal can be used to identify its origin. In the case of canals produced by a Faraday screen we demonstrate that, if the polarization angle changes by $90\\degr$ across the canal, as is observed in all fields to-date, the gradients in $\\RM$ must be discontinuous. Shocks are an obvious source of such discontinuities and we derive a relation of the expected mean separation of canals to the abundance and Mach number of supernova driven shocks, and compare this with recent observations by \\citet{Haverkorn03}. We also predict the existence of less common canals with polarization angle changes o...

  11. Panama Canal Watershed Experiment- Agua Salud Project

    Science.gov (United States)

    Stallard, Robert F.; Ogden, Fred L.; Elsenbeer, Helmut; Hall, Jefferson S.

    2010-01-01

    The Agua Salud Project utilizes the Panama Canal’s (Canal) central role in world commerce to focus global attention on the ecosystem services provided by tropical forests. The Canal was one of the great engineering projects in the world. Completed in 1914, after almost a decade of concerted effort, its 80 km length greatly shortened the voyage between the Atlantic and Pacific Oceans. An entire class of ships, the Panamax, has been constructed to maximize the amount of cargo that can be carried in a Canal passage. In today’s parlance, the Canal is a “green” operation, powered largely by water (Table 1). The locks, three pairs on each end with a net lift of 27 meters, are gravity fed. For each ton of cargo that is transferred from ocean to ocean, about 13 tons of water (m3) are used. Lake Gatún forms much of the waterway in the Canal transect. Hydroelectricity is generated at the Gatún dam, whenever there is surplus water, and at Madden Dam (completed in 1936) when water is transferred from Lake Alhajuela to Lake Gatún. The Canal watershed is the source of drinking water for Panama City and Colon City, at either end of the Canal, and numerous towns in between.

  12. Anterior canal BPPV and apogeotropic posterior canal BPPV: two rare forms of vertical canalolithiasis.

    Science.gov (United States)

    Califano, L; Salafia, F; Mazzone, S; Melillo, M G; Califano, M

    2014-06-01

    Posterior canal benign paroxysmal positional vertigo (BPPV) is the most frequent form of BPPV. It is characterized by a paroxysmal positioning nystagmus evoked through Dix-Hallpike and Semont positioning tests. Anterior canal BPPV (AC) is more rare than posterior canal BPPV; it presents a prevalent down beating positioning nystagmus, with a torsional component clockwise for the left canal, counterclockwise for the right canal. Due to the possible lack of the torsional component, it is sometimes difficult to identify the affected ear. An apogeotropic variant of posterior BPPV (APC) has recently been described, characterised by a paroxysmal positional nystagmus in the opposite direction to the one evoked in posterior canal BPPV: the linear component is down-beating, the torsional component is clockwise for the right canal, counter-clockwise for the left canal, so that a contra-lateral anterior canal BPPV could be simulated. During a 16 month period, of 934 BPPV patients observed, the authors identified 23 (2.5%) cases of apogeotropic posterior canal BPPV and 11 (1.2%) cases of anterior canal BPPV, diagnosed using the specific oculomotor patterns described in the literature. Anterior canal BPPV was treated with the repositioning manoeuvre proposed by Yacovino, which does not require identification of the affected side, whereas apogeotropic posterior canal BPPV was treated with the Quick Liberatory Rotation manoeuvre for the typical posterior canal BPPV, since in the Dix-Hallpike position otoliths are in the same position if they come either from the ampullary arm or from the non-ampullary arm. The direct resolution of BPPV (one step therapy) was obtained in 12/34 patients, 8/23 patients with APC and 4/11 patients with AC; canalar conversion into typical posterior canal BPPV, later treated through Quick Liberatory Rotation (two-step therapy), was obtained in 19 patients,14/23 with APC and 5/11 with AC. Three patients were lost to follow-up. Considering the effects of

  13. Inner Harbor Navigation Canal Basin Velocity Analysis

    Science.gov (United States)

    2014-10-01

    ER D C/ CH L TR -1 4- 12 Inner Harbor Navigation Canal Basin Velocity Analysis Co as ta l a nd H yd ra ul ic s La bo ra to ry...library at http://acwc.sdp.sirsi.net/client/default. ERDC/CHL TR-14-12 October 2014 Inner Harbor Navigation Canal Basin Velocity Analysis...system of levees, gates, and drainage structures in the Inner Harbor Navigation Canal (IHNC) basin and the greater New Orleans, Louisiana, area. Two

  14. ITERATIVE ALGORITHMS FOR DATA ASSIMILATION PROBLEMS

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Iterative algorithms for solving the data assimilation problems are considered, based on the main and adjoint equations. Spectral properties of the control operators of the problem are studied, the iterative algorithms are justified.

  15. Investigation experimentale de l'ecoulement et des performances thermiques du nanofluide eau-oxyde de cuivre dans un Micro-Canal Chauffe

    Science.gov (United States)

    Rimbault, Benjamin

    Cette these de maitrise presentee par articles visait a etudier le comportement hydraulique et thermique d'un ecoulement de nanofluides en micro-canal chauffe. Nous avons etudie premierement de l'eau distillee, ensuite des melanges de particules d'oxyde de cuivre (taille 29nm) avec de l'eau distillee en concentrations particulaires volumiques 4.5%, 1.03%, et 0.24% (CuO-H2O). L'ecoulement force des differents fluides a ete realise au moyen de pompes a engrenages au sein d'un circuit ferme, comprenant un micro-canal a section rectangulaire (e=1.116mm,1=25.229mm) chauffe sur deux faces paralleles via des cartouches electriques, deux echangeurs de chaleurs en serie, ainsi qu'un debitmetre magnetique. A notre connaissance peu d'etudes sur l'ecoulement de nanofluides d'oxyde de cuivre-eau en micro-canal rectangulaire chauffe sont disponibles dans la litterature, cette recherche sert de contribution. Premierement, une validation avec la litterature a ete effectuee pour le cas d'un ecoulement d'eau entre plaques planes paralleles chauffees. Des essais hydrauliques ont ete realises pour une gamme du nombre de Reynolds allant jusqu'a Re=5000 a temperature constante. Par la suite des essais thermiques jusqu'a Re=2500 ont consiste en une elevation de temperature fixe (20.5°C a 30.5°C) a travers la longueur du micro-canal sous un regime stationnaire. Les resultats ont demontre une augmentation de la perte de pression et du coefficient de frottement des nanofluides sur l'eau pour un meme debit. Une telle augmentation de perte de pression etait de +70%, +25%, et +0 a 30% respectivement pour les concentrations 4.50%, 1.03%, et 0.24%. Concernant la transition laminaire a turbulent les comportements semblaient indiquer une valeur critique semblable entre l'eau et les differentes concentrations avec et sans chauffage a un nombre de Reynolds critique Rem 1000. Nous avons observe une legere augmentation du coefficient de convection thermique avec le debit massique pour les faibles

  16. On One-Point Iterations and DIIS

    DEFF Research Database (Denmark)

    Østerby, Ole; Sørensen, Hans Henrik Brandenborg

    2009-01-01

    We analyze various iteration procedures in many dimensions inspired by the SCF iteration used in first principles electronic structure calculations. We show that the simple mixing of densities can turn a divergent (or slowly convergent) iteration into a (faster) convergent process provided all th...

  17. REMARK ON STABILITY OF ISHIKAWA ITERATIVE PROCEDURES

    Institute of Scientific and Technical Information of China (English)

    薛志群; 田虹

    2002-01-01

    The stability of the Ishikawa iteration procedures was studied for one class ofcontinuity strong pseudocontraction and continuity strongly accretive operators with boundedrange in real uniformly smooth Banach space. Under parameters satisfying certainconditions, the convergence of iterative sequences was proved. The results improve andextend the recent corresponding results, and supply the basis of theory for further discussingconvergence of iteration procedures with errors.

  18. ITER LHCD plans and design

    Energy Technology Data Exchange (ETDEWEB)

    Bibet, Ph.; Beaumont, B.; Delpech, L.; Ekedahl, A.; Kazarian, F.; Litaudon, X.; Prou, M. [CEA Cadarache, Dept. de Recherches sur la Fusion Controlee (DRFC), 13 - Saint-Paul-lez-Durance (France); Belo, J.H.; Bizarro, J.P.S. [Centro de Fusao Nuclear, Associacao Euratom-IST, Instituto Superior Tecnico, Lisboa (Portugal); Granucci, G. [Associazione EURATOM-ENEA sulla Fusione, Milano (Italy); Kuzikov, S. [Institute of Applied Physics, Nizhny Novgorod (Russian Federation); Mailloux, J. [Euratom/UKAEA Fusion Association, Culham Science Centre, Abingdon (United Kingdom); Mirizzi, F.; Pericoli, V.; Tuccillo, A.A. [Association Euratom-ENEA sulla Fusione, Centro Ricerche Energia Frascati (Italy); Rantamaki, K. [Association Euratom-Tekes, VTT (Finland)

    2005-07-01

    LH waves experimentally exhibit the highest Current Drive efficiency at low plasma temperature, therefore they are the most suitable candidates for controlling the current profile in the off axis part of ITER Steady State plasmas. For this purpose, a 5 GHz, 20 MW CW LH system has been designed, that relies on a generator made of 24 klystrons, 1 MW each, 60 metres long circular oversized transmission lines, one antenna, based on the Passive Active Multi-function (PAM) concept. High reliability of the launcher is achieved, by limiting the power density to 33 MW/m{sup 2}. Together with the overall system description, the present results achieved toward ITER are presented. The different ongoing project are listed. The remaining outstanding problems are depicted. (authors)

  19. An Iterative Rejection Sampling Method

    CERN Document Server

    Sherstnev, A

    2008-01-01

    In the note we consider an iterative generalisation of the rejection sampling method. In high energy physics, this sampling is frequently used for event generation, i.e. preparation of phase space points distributed according to a matrix element squared $|M|^2$ for a scattering process. In many realistic cases $|M|^2$ is a complicated multi-dimensional function, so, the standard von Neumann procedure has quite low efficiency, even if an error reducing technique, like VEGAS, is applied. As a result of that, many of the $|M|^2$ calculations go to ``waste''. The considered iterative modification of the procedure can extract more ``unweighted'' events, i.e. distributed according to $|M|^2$. In several simple examples we show practical benefits of the technique and obtain more events than the standard von Neumann method, without any extra calculations of $|M|^2$.

  20. Truncated States Obtained by Iteration

    Institute of Scientific and Technical Information of China (English)

    W.B.Cardoso; N.G.de Almeida

    2008-01-01

    We introduce the concept of truncated states obtained via iterative processes(TSI)and study its statistical features,making an analogy with dynamical systems theory(DST).As a specific example,we have studied TSI for the doubring and the logistic functions,which are standard functions in studying chaos.TSI for both the doubling and logistic functions exhibit certain similar patterns when their statistical features are compared from the point of view of DST.

  1. Iterative Goal Refinement for Robotics

    Science.gov (United States)

    2014-06-01

    Iterative Goal Refinement for Robotics Mark Roberts1, Swaroop Vattam1, Ronald Alford2, Bryan Auslander3, Justin Karneeb3, Matthew Molineaux3... robotics researchers and practitioners. We present a goal lifecycle and define a formal model for GR that (1) relates distinct disciplines concerning...researchers to collaborate in exploring this exciting frontier. 1. Introduction Robotic systems often act using incomplete models in environments

  2. Boolean nested canalizing functions: a comprehensive analysis

    CERN Document Server

    Li, Yuan; Murrugarra, David; Aguilar, Boris; Laubenbacher, Reinhard

    2012-01-01

    Boolean network models of molecular regulatory networks have been used successfully in computational systems biology. The Boolean functions that appear in published models tend to have special properties, in particular the property of being nested canalizing, a property inspired by the concept of canalization in evolutionary biology. It has been shown that networks comprised of nested canalizing functions have dynamic properties that make them suitable for modeling molecular regulatory networks, namely a small number of (large) attractors, as well as relatively short limit cycles. This paper contains a detailed analysis of this class of functions, based on a novel normal form as polynomial functions over the Boolean field. The concept of layer is introduced that stratifies variables into different classes depending on their level of dominance. Using this layer concept a closed form formula is derived for the number of nested canalizing functions with a given number of variables. Additional metrics analyzed in...

  3. Two root canals in maxillary central incisor

    Directory of Open Access Journals (Sweden)

    Fábio de Almeida Gomes

    2011-07-01

    Full Text Available Introduction and objective: The success of endodontic treatment requires the knowledge of tooth morphology and its variations. Case report: This clinical article reports an unusual root canal configuration that was detected in a maxillary central incisor with two root canals, demonstrated by radiographic and computerized tomography exams. Conclusion: Knowledge of endodontic anatomy as well as the obtainment of both preoperative radiographs and tomography is important to detect abnormal tooth morphology.

  4. Iterative methods for mixed finite element equations

    Science.gov (United States)

    Nakazawa, S.; Nagtegaal, J. C.; Zienkiewicz, O. C.

    1985-01-01

    Iterative strategies for the solution of indefinite system of equations arising from the mixed finite element method are investigated in this paper with application to linear and nonlinear problems in solid and structural mechanics. The augmented Hu-Washizu form is derived, which is then utilized to construct a family of iterative algorithms using the displacement method as the preconditioner. Two types of iterative algorithms are implemented. Those are: constant metric iterations which does not involve the update of preconditioner; variable metric iterations, in which the inverse of the preconditioning matrix is updated. A series of numerical experiments is conducted to evaluate the numerical performance with application to linear and nonlinear model problems.

  5. Meromorphic iterative roots of linear fractional functions

    Institute of Scientific and Technical Information of China (English)

    SHI YongGuo; CHEN Li

    2009-01-01

    Iterative root problem can be regarded as a weak version of the problem of embedding a homeomorphism into a flow. There are many results on iterative roots of monotone functions. However, this problem gets more difficult in non-monotone cases. Therefore, it is interesting to find iterative roots of linear fractional functions (abbreviated as LFFs), a class of non-monotone functions on R. In this paper, iterative roots of LFFs are studied on C. An equivalence between the iterative functional equation for non-constant LFFs and the matrix equation is given. By means of a method of finding matrix roots, general formulae of all meromorphic iterative roots of LFFs are obtained and the precise number of roots is also determined in various cases. As applications, we present all meromorphic iterative roots for functions z and 1/z.

  6. Performance bounds for Lambda Policy Iteration

    CERN Document Server

    Scherrer, Bruno

    2007-01-01

    We consider the discrete-time infinite-horizon discounted stationary optimal control problem formalized by Markov Decision Processes. We study Lambda Policy Iteration, a family of algorithms parameterized by lambda, originally introduced by Ioffe and Bertsekas. Lambda Policy Iteration generalizes the standard algorithms Value Iteration and Policy Iteration, and has some connections with TD(Lambda) introduced by Sutton & Barto. We deepen the original theory developped by Ioffe and Bertsekas by providing convergence rate bounds which generalize standard bounds for Value Iteration described for instance by Puterman. We also develop the theory of this algorithm when it is used in an approximate form. Doing so, we extend and unify the separate analyses developped by Munos for Approximate Value Iteration and Approximate Policy Iteration.

  7. The fluid mechanics of root canal irrigation.

    Science.gov (United States)

    Gulabivala, K; Ng, Y-L; Gilbertson, M; Eames, I

    2010-12-01

    Root canal treatment is a common dental operation aimed at removing the contents of the geometrically complex canal chambers within teeth; its purpose is to remove diseased or infected tissue. The complex chamber is first enlarged and shaped by instruments to a size sufficient to deliver antibacterial fluids. These irrigants help to dissolve dying tissue, disinfect the canal walls and space and flush out debris. The effectiveness of the procedure is limited by access to the canal terminus. Endodontic research is focused on finding the instruments and clinical procedures that might improve success rates by more effectively reaching the apical anatomy. The individual factors affecting treatment outcome have not been unequivocally deciphered, partly because of the difficulty in isolating them and in making the link between simplified, general experimental models and the complex biological objects that are teeth. Explicitly considering the physical processes within the root canal can contribute to the resolution of these problems. The central problem is one of fluid motion in a confined geometry, which makes the dispersion and mixing of irrigant more difficult because of the absence of turbulence over much of the canal volume. The effects of treatments can be understood through the use of scale models, mathematical modelling and numerical computations. A particular concern in treatment is that caustic irrigant may penetrate beyond the root canal, causing chemical damage to the jawbone. In fact, a stagnation plane exists beyond the needle tip, which the irrigant cannot penetrate. The goal is therefore to shift the stagnation plane apically to be coincident with the canal terminus without extending beyond it. Needle design may solve some of the problems but the best design for irrigant penetration conflicts with that for optimal removal of the bacterial biofilm from the canal wall. Both irrigant penetration and biofilm removal may be improved through canal fluid

  8. Posterior semicircular canal dehiscence: a morphologic cause of vertigo similar to superior semicircular canal dehiscence

    Energy Technology Data Exchange (ETDEWEB)

    Krombach, G.A.; Schmitz-Rode, T.; Haage, P.; Guenther, R.W. [Department of Diagnostic Radiology, University of Technology, Pauwelstrasse 30, 52057, Aachen (Germany); DiMartino, E. [Department of Otorhinolaryngology, University of Technology, Pauwelstrasse 30, 52057, Aachen (Germany); Prescher, A. [Department of Anatomy, University of Technology, Pauwelstrasse 30, 52057, Aachen (Germany); Kinzel, S. [Department of Experimental Veterinarian Medicine, University of Technology, Pauwelstrasse 30, 52057, Aachen (Germany)

    2003-06-01

    Heading Abstract.The aim of this study was to assess imaging findings of posterior semicircular dehiscence on computed tomography and to evaluate incidence of posterior and superior semicircular canal dehiscence in patients presenting with vertigo, sensorineuronal hearing loss or in a control group without symptoms related to the inner ear. Computed tomography was performed in 507 patients presenting either with vertigo (n=128; 23 of these patients suffered also from sensorineuronal hearing loss), other symptoms related to the inner ear, such as hearing loss or tinnitus (n=183) or symptoms unrelated to the labyrinth (n=196). All images were reviewed for presence of dehiscence of the bone, overlying the semicircular canals. Twenty-nine patients had superior semicircular canal dehiscence. Of these patients, 83% presented with vertigo, 10% with hearing loss or tinnitus and the remaining 7% with symptoms unrelated to the inner ear. In 23 patients dehiscence of the posterior semicircular canal was encountered. Of these patients, 86% presented with vertigo, 9% with hearing loss or tinnitus and 5% with symptoms unrelated to the inner ear. Defects of the bony overly are found at the posterior semicircular canal, in addition to the recently introduced superior canal dehiscence syndrome. Significant prevalence of vertigo in these patients suggests that posterior semicircular canal dehiscence can cause vertigo, similar to superior semicircular canal dehiscence. (orig.)

  9. An in vitro model to investigate filling of lateral canals.

    Science.gov (United States)

    Venturi, Mauro; Di Lenarda, Roberto; Prati, Carlo; Breschi, Lorenzo

    2005-12-01

    Aims of this work were to examine lateral canals in extracted teeth, to propose a new technique to produce artificial lateral canals, and to compare two obturation techniques. Cleared roots were examined to record measure and shape of lateral canals. Artificial lateral canals were prepared on human demineralized teeth before final clearing. Specimens were divided in two groups: canals of group 1 were filled with Schilder's technique, canals of group 2 were filled with vertical compaction with apical backfilling. Stereomicroscopic analysis of lateral canal filling revealed lower filling rates in apical canals compared to coronal ones and higher filling rates with "vertical compaction with apical backfilling" compared to Schilder's group. The tested procedure appears to be a reliable technique to obtain standardized lateral canals and to compare filling procedures.

  10. Cryogenic instrumentation for ITER magnets

    Science.gov (United States)

    Poncet, J.-M.; Manzagol, J.; Attard, A.; André, J.; Bizel-Bizellot, L.; Bonnay, P.; Ercolani, E.; Luchier, N.; Girard, A.; Clayton, N.; Devred, A.; Huygen, S.; Journeaux, J.-Y.

    2017-02-01

    Accurate measurements of the helium flowrate and of the temperature of the ITER magnets is of fundamental importance to make sure that the magnets operate under well controlled and reliable conditions, and to allow suitable helium flow distribution in the magnets through the helium piping. Therefore, the temperature and flow rate measurements shall be reliable and accurate. In this paper, we present the thermometric chains as well as the venturi flow meters installed in the ITER magnets and their helium piping. The presented thermometric block design is based on the design developed by CERN for the LHC, which has been further optimized via thermal simulations carried out by CEA. The electronic part of the thermometric chain was entirely developed by the CEA and will be presented in detail: it is based on a lock-in measurement and small signal amplification, and also provides a web interface and software to an industrial PLC. This measuring device provides a reliable, accurate, electromagnetically immune, and fast (up to 100 Hz bandwidth) system for resistive temperature sensors between a few ohms to 100 kΩ. The flowmeters (venturi type) which make up part of the helium mass flow measurement chain have been completely designed, and manufacturing is on-going. The behaviour of the helium gas has been studied in detailed thanks to ANSYS CFX software in order to obtain the same differential pressure for all types of flowmeters. Measurement uncertainties have been estimated and the influence of input parameters has been studied. Mechanical calculations have been performed to guarantee the mechanical strength of the venturis required for pressure equipment operating in nuclear environment. In order to complete the helium mass flow measurement chain, different technologies of absolute and differential pressure sensors have been tested in an applied magnetic field to identify equipment compatible with the ITER environment.

  11. A radiographic study of mandibular canal

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Won Chul; Lee, Sang Rae [Dept. of Oral Radiology, Division of Dentistry, Kyung Hee University, Seoul (Korea, Republic of)

    1987-11-15

    The author invested the gonial angle, the angle of mandibular and mental canal to the lower border of the mandible, and a relationship of the position of the mandibular canal to the root apex of the posterior teeth and the cortical plate of the lower of the mandible. The materials consisted of 458 pantomograms in male and female aged 11-40 and divided into 5 groups at year intervals and subdivided into 3 groups by gonial angle. The results were as follows: 1. The gonial angle decreased with age, but slight increase occurred over 26-30 years. 2. The average angle of the mandibular canal to the lower border of the mandible was 151.6 degree and did not correlate with age. 3. The average angle of the mental canal to the lower border of the mandible was 36.9 degree and didn't correlate with age. 4. The angles of mandibular and mental canal to the lower border of mandible correlated with gonial angle. 5. The distance from the root apex of the posterior teeth to the upper wall mandibular canal was most short at the region of the distal root of the mandibular second and increased with age at the region of the mandibular second molar. 6. The distance from the lower wall of the mandibular canal to the cortical plate of the lower border of the mandibule was most short at the region of the mesial root of the mandibular first molar and didn't correlate with age.

  12. IHadoop: Asynchronous iterations for MapReduce

    KAUST Repository

    Elnikety, Eslam Mohamed Ibrahim

    2011-11-01

    MapReduce is a distributed programming frame-work designed to ease the development of scalable data-intensive applications for large clusters of commodity machines. Most machine learning and data mining applications involve iterative computations over large datasets, such as the Web hyperlink structures and social network graphs. Yet, the MapReduce model does not efficiently support this important class of applications. The architecture of MapReduce, most critically its dataflow techniques and task scheduling, is completely unaware of the nature of iterative applications; tasks are scheduled according to a policy that optimizes the execution for a single iteration which wastes bandwidth, I/O, and CPU cycles when compared with an optimal execution for a consecutive set of iterations. This work presents iHadoop, a modified MapReduce model, and an associated implementation, optimized for iterative computations. The iHadoop model schedules iterations asynchronously. It connects the output of one iteration to the next, allowing both to process their data concurrently. iHadoop\\'s task scheduler exploits inter-iteration data locality by scheduling tasks that exhibit a producer/consumer relation on the same physical machine allowing a fast local data transfer. For those iterative applications that require satisfying certain criteria before termination, iHadoop runs the check concurrently during the execution of the subsequent iteration to further reduce the application\\'s latency. This paper also describes our implementation of the iHadoop model, and evaluates its performance against Hadoop, the widely used open source implementation of MapReduce. Experiments using different data analysis applications over real-world and synthetic datasets show that iHadoop performs better than Hadoop for iterative algorithms, reducing execution time of iterative applications by 25% on average. Furthermore, integrating iHadoop with HaLoop, a variant Hadoop implementation that caches

  13. The Kra Canal and Southeast Asian Relations

    Directory of Open Access Journals (Sweden)

    Rini Suryati Sulong

    2012-01-01

    Full Text Available This paper is a conceptual study that attempts to analyse the possible effects of the development of the Kra Isthmus Canal on ASEAN relations. The Kra Canal would constitute a mega-project, a passageway that would connect the Andaman Sea and the Gulf of Thailand at the Isthmus of Kra, Thailand. Although the proposed Kra Canal is projected to provide many economic and trade benefits to Thailand, and to the region as a whole, steps toward its development have yet to be taken. There has been much debate over the costs for trade, the costs for the environment, national and regional security concerns, as well as major concerns related to political and economic relations in the region. Therefore, one of the main purposes of this study is to contribute to the debate on the possible impact of the devel-opment of the Kra Canal on ASEAN’s regional relations. In particular, it proposes that the development of the Kra Canal could threaten regional solidarity as it would physically divide maritime Southeast Asia from main-land Southeast Asia, which would ultimately result in an economic, cultural and political divide of ASEAN itself.

  14. Iterated Stretching of Viscoelastic Jets

    Science.gov (United States)

    Chang, Hsueh-Chia; Demekhin, Evgeny A.; Kalaidin, Evgeny

    1999-01-01

    We examine, with asymptotic analysis and numerical simulation, the iterated stretching dynamics of FENE and Oldroyd-B jets of initial radius r(sub 0), shear viscosity nu, Weissenberg number We, retardation number S, and capillary number Ca. The usual Rayleigh instability stretches the local uniaxial extensional flow region near a minimum in jet radius into a primary filament of radius [Ca(1 - S)/ We](sup 1/2)r(sub 0) between two beads. The strain-rate within the filament remains constant while its radius (elastic stress) decreases (increases) exponentially in time with a long elastic relaxation time 3We(r(sup 2, sub 0)/nu). Instabilities convected from the bead relieve the tension at the necks during this slow elastic drainage and trigger a filament recoil. Secondary filaments then form at the necks from the resulting stretching. This iterated stretching is predicted to occur successively to generate high-generation filaments of radius r(sub n), (r(sub n)/r(sub 0)) = square root of 2[r(sub n-1)/r(sub 0)](sup 3/2) until finite-extensibility effects set in.

  15. ETR/ITER systems code

    Energy Technology Data Exchange (ETDEWEB)

    Barr, W.L.; Bathke, C.G.; Brooks, J.N.; Bulmer, R.H.; Busigin, A.; DuBois, P.F.; Fenstermacher, M.E.; Fink, J.; Finn, P.A.; Galambos, J.D.; Gohar, Y.; Gorker, G.E.; Haines, J.R.; Hassanein, A.M.; Hicks, D.R.; Ho, S.K.; Kalsi, S.S.; Kalyanam, K.M.; Kerns, J.A.; Lee, J.D.; Miller, J.R.; Miller, R.L.; Myall, J.O.; Peng, Y-K.M.; Perkins, L.J.; Spampinato, P.T.; Strickler, D.J.; Thomson, S.L.; Wagner, C.E.; Willms, R.S.; Reid, R.L. (ed.)

    1988-04-01

    A tokamak systems code capable of modeling experimental test reactors has been developed and is described in this document. The code, named TETRA (for Tokamak Engineering Test Reactor Analysis), consists of a series of modules, each describing a tokamak system or component, controlled by an optimizer/driver. This code development was a national effort in that the modules were contributed by members of the fusion community and integrated into a code by the Fusion Engineering Design Center. The code has been checked out on the Cray computers at the National Magnetic Fusion Energy Computing Center and has satisfactorily simulated the Tokamak Ignition/Burn Experimental Reactor II (TIBER) design. A feature of this code is the ability to perform optimization studies through the use of a numerical software package, which iterates prescribed variables to satisfy a set of prescribed equations or constraints. This code will be used to perform sensitivity studies for the proposed International Thermonuclear Experimental Reactor (ITER). 22 figs., 29 tabs.

  16. ITER Port Interspace Pressure Calculations

    Energy Technology Data Exchange (ETDEWEB)

    Carbajo, Juan J [ORNL; Van Hove, Walter A [ORNL

    2016-01-01

    The ITER Vacuum Vessel (VV) is equipped with 54 access ports. Each of these ports has an opening in the bioshield that communicates with a dedicated port cell. During Tokamak operation, the bioshield opening must be closed with a concrete plug to shield the radiation coming from the plasma. This port plug separates the port cell into a Port Interspace (between VV closure lid and Port Plug) on the inner side and the Port Cell on the outer side. This paper presents calculations of pressures and temperatures in the ITER (Ref. 1) Port Interspace after a double-ended guillotine break (DEGB) of a pipe of the Tokamak Cooling Water System (TCWS) with high temperature water. It is assumed that this DEGB occurs during the worst possible conditions, which are during water baking operation, with water at a temperature of 523 K (250 C) and at a pressure of 4.4 MPa. These conditions are more severe than during normal Tokamak operation, with the water at 398 K (125 C) and 2 MPa. Two computer codes are employed in these calculations: RELAP5-3D Version 4.2.1 (Ref. 2) to calculate the blowdown releases from the pipe break, and MELCOR, Version 1.8.6 (Ref. 3) to calculate the pressures and temperatures in the Port Interspace. A sensitivity study has been performed to optimize some flow areas.

  17. Status of US ITER Diagnostics

    Science.gov (United States)

    Stratton, B.; Delgado-Aparicio, L.; Hill, K.; Johnson, D.; Pablant, N.; Barnsley, R.; Bertschinger, G.; de Bock, M. F. M.; Reichle, R.; Udintsev, V. S.; Watts, C.; Austin, M.; Phillips, P.; Beiersdorfer, P.; Biewer, T. M.; Hanson, G.; Klepper, C. C.; Carlstrom, T.; van Zeeland, M. A.; Brower, D.; Doyle, E.; Peebles, A.; Ellis, R.; Levinton, F.; Yuh, H.

    2013-10-01

    The US is providing 7 diagnostics to ITER: the Upper Visible/IR cameras, the Low Field Side Reflectometer, the Motional Stark Effect diagnostic, the Electron Cyclotron Emission diagnostic, the Toroidal Interferometer/Polarimeter, the Core Imaging X-Ray Spectrometer, and the Diagnostic Residual Gas Analyzer. The front-end components of these systems must operate with high reliability in conditions of long pulse operation, high neutron and gamma fluxes, very high neutron fluence, significant neutron heating (up to 7 MW/m3) , large radiant and charge exchange heat flux (0.35 MW/m2) , and high electromagnetic loads. Opportunities for repair and maintenance of these components will be limited. These conditions lead to significant challenges for the design of the diagnostics. Space constraints, provision of adequate radiation shielding, and development of repair and maintenance strategies are challenges for diagnostic integration into the port plugs that also affect diagnostic design. The current status of design of the US ITER diagnostics is presented and R&D needs are identified. Supported by DOE contracts DE-AC02-09CH11466 (PPPL) and DE-AC05-00OR22725 (UT-Battelle, LLC).

  18. A Statistical Treatment of Bioassay Pour Fractions

    Science.gov (United States)

    Barengoltz, Jack; Hughes, David W.

    2014-01-01

    The binomial probability distribution is used to treat the statistics of a microbiological sample that is split into two parts, with only one part evaluated for spore count. One wishes to estimate the total number of spores in the sample based on the counts obtained from the part that is evaluated (pour fraction). Formally, the binomial distribution is recharacterized as a function of the observed counts (successes), with the total number (trials) an unknown. The pour fraction is the probability of success per spore (trial). This distribution must be renormalized in terms of the total number. Finally, the new renormalized distribution is integrated and mathematically inverted to yield the maximum estimate of the total number as a function of a desired level of confidence ( P(fraction. The extension to recovery efficiency corrections is also presented. Now the product of recovery efficiency and pour fraction may be small enough that the likely value may be much larger than the usual calculation: the number of spores divided by that product. The use of this analysis would not be limited to microbiological data.

  19. Preconditioned iterations to calculate extreme eigenvalues

    Energy Technology Data Exchange (ETDEWEB)

    Brand, C.W.; Petrova, S. [Institut fuer Angewandte Mathematik, Leoben (Austria)

    1994-12-31

    Common iterative algorithms to calculate a few extreme eigenvalues of a large, sparse matrix are Lanczos methods or power iterations. They converge at a rate proportional to the separation of the extreme eigenvalues from the rest of the spectrum. Appropriate preconditioning improves the separation of the eigenvalues. Davidson`s method and its generalizations exploit this fact. The authors examine a preconditioned iteration that resembles a truncated version of Davidson`s method with a different preconditioning strategy.

  20. A FAST CONVERGENT METHOD OF ITERATED REGULARIZATION

    Institute of Scientific and Technical Information of China (English)

    Huang Xiaowei; Wu Chuansheng; Wu Di

    2009-01-01

    This article presents a fast convergent method of iterated regularization based on the idea of Landweber iterated regularization, and a method for a-posteriori choice by the Morozov discrepancy principle and the optimum asymptotic convergence order of the regularized solution is obtained. Numerical test shows that the method of iterated regu-larization can quicken the convergence speed and reduce the calculation burden efficiently.

  1. Synchronous rectal adenocarcinoma and anal canal adenocarcinoma

    Institute of Scientific and Technical Information of China (English)

    GU Jin; LI Jiyou; YAO Yunfeng; LU Aiping; WANG Hongyi

    2007-01-01

    It is difficult to distinguish a tectal carcinoma with anal metastases from coexistent synchronous anorectal carcinomas.The therapeutic strategy for rectal and anal carcinoma is so different that it should be clearly identified.Here,we report on the case of a 63-year-old man who presented with an upper-third rectal adenocarcinoma.Five months after resection,he developed an adenocarcinoma in the anal canal.The histological slides of both tumors were reviewed and immunohistochemical studies for cytokeratins(CKs)7 and 20 were performed.The index tumor demonstrated CK 7-/CK 20+and the second showed CK7+/CK20+.For this reason,we believe the present case had synchronous adenocarcinomas arising from anal canal and the rectum separately.It is very important to difierentiate the anorectal lesions pathologically because of the impact on the therapeutic options available,especially for the lesion arising in the anal canal.

  2. File list: Unc.CDV.10.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.CDV.10.AllAg.Atrioventicular_canals mm9 Unclassified Cardiovascular Atrioventicular canal...s http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Unc.CDV.10.AllAg.Atrioventicular_canals.bed ...

  3. File list: Unc.CDV.05.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.CDV.05.AllAg.Atrioventicular_canals mm9 Unclassified Cardiovascular Atrioventicular canal...s http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Unc.CDV.05.AllAg.Atrioventicular_canals.bed ...

  4. File list: Unc.CDV.20.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.CDV.20.AllAg.Atrioventicular_canals mm9 Unclassified Cardiovascular Atrioventicular canal...s http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Unc.CDV.20.AllAg.Atrioventicular_canals.bed ...

  5. File list: His.CDV.20.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.CDV.20.AllAg.Atrioventicular_canals mm9 Histone Cardiovascular Atrioventicular canal...s http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/His.CDV.20.AllAg.Atrioventicular_canals.bed ...

  6. File list: His.CDV.10.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.CDV.10.AllAg.Atrioventicular_canals mm9 Histone Cardiovascular Atrioventicular canal...s http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/His.CDV.10.AllAg.Atrioventicular_canals.bed ...

  7. File list: His.CDV.50.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.CDV.50.AllAg.Atrioventicular_canals mm9 Histone Cardiovascular Atrioventicular canal...s http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/His.CDV.50.AllAg.Atrioventicular_canals.bed ...

  8. File list: His.CDV.05.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.CDV.05.AllAg.Atrioventicular_canals mm9 Histone Cardiovascular Atrioventicular canal...s http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/His.CDV.05.AllAg.Atrioventicular_canals.bed ...

  9. File list: Unc.CDV.50.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.CDV.50.AllAg.Atrioventicular_canals mm9 Unclassified Cardiovascular Atrioventicular canal...s http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Unc.CDV.50.AllAg.Atrioventicular_canals.bed ...

  10. Iterative solution of the reduced eigenvalue problem

    Energy Technology Data Exchange (ETDEWEB)

    Sauer, G. (Technischer Ueberwachungs-Verein Bayern e.V., Muenchen (Germany, F.R.))

    1991-04-01

    The Guyan method of reducing the stiffness and mass matrices of large linear structures introduces errors in the reduced mass matrix. These errors cannot be completely avoided even if the analysis coordinates are chosen optimally. However, they can be elimiated by iterating on the eigenvectors found from the Guyan reduced matrices. The necessary iteration steps follow directly from the eigenvalue problem. The resulting iteration procedures are presented and applied to two test problems showing that the iterations enable the exact eigensolutions to be extracted. All errors from the Guyan reduced matrices are removed or substantially decreased. (orig.).

  11. Cancer of the external auditory canal

    DEFF Research Database (Denmark)

    Nyrop, Mette; Grøntved, Aksel

    2002-01-01

    OBJECTIVE: To evaluate the outcome of surgery for cancer of the external auditory canal and relate this to the Pittsburgh staging system used both on squamous cell carcinoma and non-squamous cell carcinoma. DESIGN: Retrospective case series of all patients who had surgery between 1979 and 2000....... PATIENTS: Ten women and 10 men with previously untreated primary cancer. Median age at diagnosis was 67 years (range, 31-87 years). Survival data included 18 patients with at least 2 years of follow-up or recurrence. INTERVENTION: Local canal resection or partial temporal bone resection. MAIN OUTCOME...

  12. Polyacrylamide Transport in Water Delivery Canals

    Science.gov (United States)

    Chen, L.; Zhu, J.; Young, M.

    2007-12-01

    Linear, anionic polyacrylamide (PAM) is being considered in the western United States as a technology to reduce seepage in unlined water delivery canals. A broad laboratory and field testing program has been undertaken to understand the benefits and potential environmental impacts of PAM use. The ability to predict the fate and transport of PAM in water delivery canals could prove to be a useful planning tool for PAM application. However, one key area of uncertainty of this type of canal treatment is the hydration, reaction, and settling rates of PAM after the dry powder is added to the canal water. In this study, we have developed a model that incorporates a number of known physical and chemical processes that can affect PAM transport, such as convection, dispersion, dissolution, flocculation, and settling, while solving the governing convection-dispersion transport equation. The model uses a mixed analytical and advanced numerical approach, and implements a transient partitioning of PAM mass between the canal water, the substrate soil, and potentially to open water bodies downstream of the application point. All source terms are modeled based on physical and chemical mechanisms as well as laboratory or field determined parameters. To more closely simulate field treatment of some canals, where PAM application moves upstream in time, the model is capable of implementing either a fixed or mobile upper boundary. In the latter treatment, the PAM can be added discretely or continuously in both time and space. A number of test situations have been simulated thus far, including theoretical and hypothetical cases for a wide range of conditions. The model also performed well when predicting PAM concentrations from a full-scale canal treatment experiment. The model provides a useful tool for predicting PAM fate and transport in water delivery canals, and therefore can play an important role in evaluating the efficacy of PAM application for water resources management

  13. Research at ITER towards DEMO: Specific reactor diagnostic studies to be carried out on ITER

    Science.gov (United States)

    Krasilnikov, A. V.; Kaschuck, Y. A.; Vershkov, V. A.; Petrov, A. A.; Petrov, V. G.; Tugarinov, S. N.

    2014-08-01

    In ITER diagnostics will operate in the very hard radiation environment of fusion reactor. Extensive technology studies are carried out during development of the ITER diagnostics and procedures of their calibration and remote handling. Results of these studies and practical application of the developed diagnostics on ITER will provide the direct input to DEMO diagnostic development. The list of DEMO measurement requirements and diagnostics will be determined during ITER experiments on the bases of ITER plasma physics results and success of particular diagnostic application in reactor-like ITER plasma. Majority of ITER diagnostic already passed the conceptual design phase and represent the state of the art in fusion plasma diagnostic development. The number of related to DEMO results of ITER diagnostic studies such as design and prototype manufacture of: neutron and γ-ray diagnostics, neutral particle analyzers, optical spectroscopy including first mirror protection and cleaning technics, reflectometry, refractometry, tritium retention measurements etc. are discussed.

  14. Research at ITER towards DEMO: Specific reactor diagnostic studies to be carried out on ITER

    Energy Technology Data Exchange (ETDEWEB)

    Krasilnikov, A. V.; Kaschuck, Y. A.; Vershkov, V. A.; Petrov, A. A.; Petrov, V. G.; Tugarinov, S. N. [Institution Project center ITER, Moscow (Russian Federation)

    2014-08-21

    In ITER diagnostics will operate in the very hard radiation environment of fusion reactor. Extensive technology studies are carried out during development of the ITER diagnostics and procedures of their calibration and remote handling. Results of these studies and practical application of the developed diagnostics on ITER will provide the direct input to DEMO diagnostic development. The list of DEMO measurement requirements and diagnostics will be determined during ITER experiments on the bases of ITER plasma physics results and success of particular diagnostic application in reactor-like ITER plasma. Majority of ITER diagnostic already passed the conceptual design phase and represent the state of the art in fusion plasma diagnostic development. The number of related to DEMO results of ITER diagnostic studies such as design and prototype manufacture of: neutron and γ–ray diagnostics, neutral particle analyzers, optical spectroscopy including first mirror protection and cleaning technics, reflectometry, refractometry, tritium retention measurements etc. are discussed.

  15. Surgical endodontic management of infected lateral canals of maxillary incisors

    Science.gov (United States)

    2015-01-01

    This case report presents surgical endodontic management outcomes of maxillary incisors that were infected via the lateral canals. Two cases are presented in which endodontically-treated maxillary central incisors had sustained lateral canal infections. A surgical endodontic treatment was performed on both teeth. Flap elevation revealed vertical bone destruction along the root surface and infected lateral canals, and microscopy revealed that the lateral canals were the origin of the lesions. After the infected lateral canals were surgically managed, both teeth were asymptomatic and labial fistulas were resolved. There were no clinical or radiographic signs of surgical endodontic management failure at follow-up visits. This case report highlights the clinical significance and surgical endodontic management of infected lateral canal of maxillary incisor. It is important to be aware of root canal anatomy variability in maxillary incisors. Maxillary central incisors infected via the lateral canal can be successfully managed by surgical endodontic treatment. PMID:25671217

  16. Cochlear implant outcomes in patients with superior canal dehiscence

    NARCIS (Netherlands)

    Puram, Sidharth V.; Roberts, Daniel S.; Niesten, Marlien E F; Dilger, Amanda E.; Lee, Daniel J.

    2015-01-01

    Objective: To determine whether adult cochlear implant (CI) users with superior canal dehiscence syndrome (SCDS) or asymptomatic superior semicircular canal dehiscence (SCD) have different surgical, vestibular, and audiologic outcomes when compared to CI users with normal temporal bone anatomy. Meth

  17. Stratification and enumeration of Boolean functions by canalizing depth

    CERN Document Server

    He, Qijun

    2015-01-01

    Boolean network models have gained popularity in computational systems biology over the last dozen years. Many of these networks use canalizing Boolean functions, which has led to increased interest in the study of these functions. The canalizing depth of a function describes how many canalizing variables can be recursively picked off, until a non-canalizing function remains. In this paper, we show how every Boolean function has a unique algebraic form involving extended monomial layers and a well-defined core polynomial. This generalizes recent work on the algebraic structure of nested canalizing functions, and it yields a stratification of all Boolean functions by their canalizing depth. As a result, we obtain closed formulas for the number of n-variable Boolean functions with depth k, which simultaneously generalizes enumeration formulas for canalizing, and nested canalizing functions.

  18. Intradermal melanocytic nevus of the external auditory canal.

    Science.gov (United States)

    Alves, Renato V; Brandão, Fabiano H; Aquino, José E P; Carvalho, Maria R M S; Giancoli, Suzana M; Younes, Eduado A P

    2005-01-01

    Intradermal nevi are common benign pigmented skin tumors. Their occurrence within the external auditory canal is uncommon. The clinical and pathologic features of an intradermal nevus arising within the external auditory canal are presented, and the literature reviewed.

  19. Stratification and enumeration of Boolean functions by canalizing depth

    Science.gov (United States)

    He, Qijun; Macauley, Matthew

    2016-01-01

    Boolean network models have gained popularity in computational systems biology over the last dozen years. Many of these networks use canalizing Boolean functions, which has led to increased interest in the study of these functions. The canalizing depth of a function describes how many canalizing variables can be recursively "picked off", until a non-canalizing function remains. In this paper, we show how every Boolean function has a unique algebraic form involving extended monomial layers and a well-defined core polynomial. This generalizes recent work on the algebraic structure of nested canalizing functions, and it yields a stratification of all Boolean functions by their canalizing depth. As a result, we obtain closed formulas for the number of n-variable Boolean functions with depth k, which simultaneously generalizes enumeration formulas for canalizing, and nested canalizing functions.

  20. Quantitatively pouring draft beer dispenser; Teiryo chushutsu nama beer dispenser

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-01-10

    Suppressing bubble generation and quantitatively pouring more stably were the large problem in draft beer or sparking liquor vending. Therefore, bubbling mechanism in draft beer was analyzed, and pouring valve and beer dispensing system were optimized to have developed a beer dispenser generating little bubbles when dispensing. Its major features are as follows: (1) a valve was developed that branches liquid and bubbles without disturbing the beer flow, thus realizing stable pouring; (2) a beer mug tray drive was developed that prevents after-drips of bubbles from entering into another mug, thus realizing stable pouring; (3) the button operated rinsing function and the pouring valve removing and attaching structure facilitate washing work; and (4) the additional pouring function and the copying function facilitate setting of the dispensing volume. (translated by NEDO)

  1. Truncated states obtained by iteration

    CERN Document Server

    Cardoso, W B

    2007-01-01

    Quantum states of the electromagnetic field are of considerable importance, finding potential application in various areas of physics, as diverse as solid state physics, quantum communication and cosmology. In this paper we introduce the concept of truncated states obtained via iterative processes (TSI) and study its statistical features, making an analogy with dynamical systems theory (DST). As a specific example, we have studied TSI for the doubling and the logistic functions, which are standard functions in studying chaos. TSI for both the doubling and logistic functions exhibit certain similar patterns when their statistical features are compared from the point of view of DST. A general method to engineer TSI in the running-wave domain is employed, which includes the errors due to the nonidealities of detectors and photocounts.

  2. Planning as an Iterative Process

    Science.gov (United States)

    Smith, David E.

    2012-01-01

    Activity planning for missions such as the Mars Exploration Rover mission presents many technical challenges, including oversubscription, consideration of time, concurrency, resources, preferences, and uncertainty. These challenges have all been addressed by the research community to varying degrees, but significant technical hurdles still remain. In addition, the integration of these capabilities into a single planning engine remains largely unaddressed. However, I argue that there is a deeper set of issues that needs to be considered namely the integration of planning into an iterative process that begins before the goals, objectives, and preferences are fully defined. This introduces a number of technical challenges for planning, including the ability to more naturally specify and utilize constraints on the planning process, the ability to generate multiple qualitatively different plans, and the ability to provide deep explanation of plans.

  3. Benchmarking ICRF simulations for ITER

    Energy Technology Data Exchange (ETDEWEB)

    R. V. Budny, L. Berry, R. Bilato, P. Bonoli, M. Brambilla, R.J. Dumont, A. Fukuyama, R. Harvey, E.F. Jaeger, E. Lerche, C.K. Phillips, V. Vdovin, J. Wright, and members of the ITPA-IOS

    2010-09-28

    Abstract Benchmarking of full-wave solvers for ICRF simulations is performed using plasma profiles and equilibria obtained from integrated self-consistent modeling predictions of four ITER plasmas. One is for a high performance baseline (5.3 T, 15 MA) DT H-mode plasma. The others are for half-field, half-current plasmas of interest for the pre-activation phase with bulk plasma ion species being either hydrogen or He4. The predicted profiles are used by seven groups to predict the ICRF electromagnetic fields and heating profiles. Approximate agreement is achieved for the predicted heating power partitions for the DT and He4 cases. Profiles of the heating powers and electromagnetic fields are compared.

  4. ITER Safety Analyses with ISAS

    Science.gov (United States)

    Gulden, W.; Nisan, S.; Porfiri, M.-T.; Toumi, I.; de Gramont, T. Boubée

    1997-06-01

    Detailed analyses of accident sequences for the International Thermonuclear Experimental Reactor (ITER), from an initiating event to the environmental release of activity, have involved in the past the use of different types of computer codes in a sequential manner. Since these codes were developed at different time scales in different countries, there is no common computing structure to enable automatic data transfer from one code to the other, and no possibility exists to model or to quantify the effect of coupled physical phenomena. To solve this problem, the Integrated Safety Analysis System of codes (ISAS) is being developed, which allows users to integrate existing computer codes in a coherent manner. This approach is based on the utilization of a command language (GIBIANE) acting as a “glue” to integrate the various codes as modules of a common environment. The present version of ISAS allows comprehensive (coupled) calculations of a chain of codes such as ATHENA (thermal-hydraulic analysis of transients and accidents), INTRA (analysis of in-vessel chemical reactions, pressure built-up, and distribution of reaction products inside the vacuum vessel and adjacent rooms), and NAUA (transport of radiological species within buildings and to the environment). In the near future, the integration of S AFALY (simultaneous analysis of plasma dynamics and thermal behavior of in-vessel components) is also foreseen. The paper briefly describes the essential features of ISAS development and the associated software architecture. It gives first results of a typical ITER accident sequence, a loss of coolant accident (LOCA) in the divertor cooling loop inside the vacuum vessel, amply demonstrating ISAS capabilities.

  5. Viscoelastic assessment of anal canal function using acoustic reflectometry

    DEFF Research Database (Denmark)

    Mitchell, Peter J; Klarskov, Niels; Telford, Karen J;

    2012-01-01

    Anal acoustic reflectometry is a new reproducible technique that allows a viscoelastic assessment of anal canal function. Five new variables reflecting anal canal function are measured: the opening and closing pressure, opening and closing elastance, and hysteresis.......Anal acoustic reflectometry is a new reproducible technique that allows a viscoelastic assessment of anal canal function. Five new variables reflecting anal canal function are measured: the opening and closing pressure, opening and closing elastance, and hysteresis....

  6. Aggregation-iterative analogues and generalizations of projection-iterative methods

    Directory of Open Access Journals (Sweden)

    Shuvar B.F.

    2013-06-01

    Full Text Available Aggregation-iterative algorithms for linear operator equations are constructed and investigated. These algorithms cover methods of iterative aggregation and projection-iterative methods. In convergence conditions there is neither requirement for the corresponding operator of fixed sign no restriction to the spectral radius to be less than one.

  7. Installation of the ITER committee industry. Participants guide; Installation du Comite industrie ITER. Dossier des participants

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    ITER is an international project to design and build an experimental fusion reactor based on the tokamak concept. This guide presents the ITER project and objectives and the associated organizations in France, the recommendations and actions for ITER, the industrial mobilization, the industrial committee and its members, technological sheets for the enterprises and the statistical document of the SESSI. (A.L.B.)

  8. 75 FR 32275 - Regulated Navigation Area; Gulf Intracoastal Waterway, Inner Harbor Navigation Canal, Harvey...

    Science.gov (United States)

    2010-06-08

    ..., Inner Harbor Navigation Canal, Harvey Canal, Algiers Canal, New Orleans, LA AGENCY: Coast Guard, DHS...), Harvey Canal, and Algiers Canal during severe hurricane conditions. Vessels will not be permitted to stay... communities within the IHNC, Harvey, and Algiers Canals from potential hazards associated with vessels...

  9. 21 CFR 872.3820 - Root canal filling resin.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Root canal filling resin. 872.3820 Section 872.3820 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3820 Root canal filling resin. (a) Identification. A root canal filling resin is a...

  10. 33 CFR 117.455 - Houma Navigation Canal.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Houma Navigation Canal. 117.455 Section 117.455 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Louisiana § 117.455 Houma Navigation Canal. The draw of SR 661 (Houma Nav Canal) bridge,...

  11. 21 CFR 872.3810 - Root canal post.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Root canal post. 872.3810 Section 872.3810 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3810 Root canal post. (a) Identification. A root canal post is a device made of austenitic alloys...

  12. Nerve canals at the fundus of the internal auditory canal on high-resolution temporal bone CT

    Energy Technology Data Exchange (ETDEWEB)

    Ji, Yoon Ha; Youn, Eun Kyung; Kim, Seung Chul [Sungkyunkwan Univ., School of Medicine, Seoul (Korea, Republic of)

    2001-12-01

    To identify and evaluate the normal anatomy of nerve canals in the fundus of the internal auditory canal which can be visualized on high-resolution temporal bone CT. We retrospectively reviewed high-resolution (1 mm thickness and interval contiguous scan) temporal bone CT images of 253 ears in 150 patients who had not suffered trauma or undergone surgery. Those with a history of uncomplicated inflammatory disease were included, but those with symptoms of vertigo, sensorineural hearing loss, or facial nerve palsy were excluded. Three radiologists determined the detectability and location of canals for the labyrinthine segment of the facial, superior vestibular and cochlear nerve, and the saccular branch and posterior ampullary nerve of the inferior vestibular nerve. Five bony canals in the fundus of the internal auditory canal were identified as nerve canals. Four canals were identified on axial CT images in 100% of cases; the so-called singular canal was identified in only 68%. On coronal CT images, canals for the labyrinthine segment of the facial and superior vestibular nerve were seen in 100% of cases, but those for the cochlear nerve, the saccular branch of the inferior vestibular nerve, and the singular canal were seen in 90.1%, 87.4% and 78% of cases, respectiveIy. In all detectable cases, the canal for the labyrinthine segment of the facial nerve was revealed as one which traversed anterolateralIy, from the anterosuperior portion of the fundus of the internal auditory canal. The canal for the cochlear nerve was located just below that for the labyrinthine segment of the facial nerve, while that canal for the superior vestibular nerve was seen at the posterior aspect of these two canals. The canal for the saccular branch of the inferior vestibular nerve was located just below the canal for the superior vestibular nerve, and that for the posterior ampullary nerve, the so-called singular canal, ran laterally or posteolateralIy from the posteroinferior aspect of

  13. New concurrent iterative methods with monotonic convergence

    Energy Technology Data Exchange (ETDEWEB)

    Yao, Qingchuan [Michigan State Univ., East Lansing, MI (United States)

    1996-12-31

    This paper proposes the new concurrent iterative methods without using any derivatives for finding all zeros of polynomials simultaneously. The new methods are of monotonic convergence for both simple and multiple real-zeros of polynomials and are quadratically convergent. The corresponding accelerated concurrent iterative methods are obtained too. The new methods are good candidates for the application in solving symmetric eigenproblems.

  14. Iterative Brinkman penalization for remeshed vortex methods

    DEFF Research Database (Denmark)

    Hejlesen, Mads Mølholm; Koumoutsakos, Petros; Leonard, Anthony;

    2015-01-01

    We introduce an iterative Brinkman penalization method for the enforcement of the no-slip boundary condition in remeshed vortex methods. In the proposed method, the Brinkman penalization is applied iteratively only in the neighborhood of the body. This allows for using significantly larger time s...

  15. Rater Variables Associated with ITER Ratings

    Science.gov (United States)

    Paget, Michael; Wu, Caren; McIlwrick, Joann; Woloschuk, Wayne; Wright, Bruce; McLaughlin, Kevin

    2013-01-01

    Advocates of holistic assessment consider the ITER a more authentic way to assess performance. But this assessment format is subjective and, therefore, susceptible to rater bias. Here our objective was to study the association between rater variables and ITER ratings. In this observational study our participants were clerks at the University of…

  16. An iterative method for spherical bounces

    CERN Document Server

    Buniy, Roman V

    2016-01-01

    We develop a new iterative method for finding approximate solutions for spherical bounces associated with the decay of the false vacuum in scalar field theories. The method works for any generic potential in any number of dimensions, contains Coleman's thin-wall approximation as its first iteration, and greatly improves its accuracy by including higher order terms.

  17. Iterative methods for weighted least-squares

    Energy Technology Data Exchange (ETDEWEB)

    Bobrovnikova, E.Y.; Vavasis, S.A. [Cornell Univ., Ithaca, NY (United States)

    1996-12-31

    A weighted least-squares problem with a very ill-conditioned weight matrix arises in many applications. Because of round-off errors, the standard conjugate gradient method for solving this system does not give the correct answer even after n iterations. In this paper we propose an iterative algorithm based on a new type of reorthogonalization that converges to the solution.

  18. ITER Fast Ion Collective Thomson Scattering

    DEFF Research Database (Denmark)

    Bindslev, Henrik; Meo, Fernando; Korsholm, Søren Bang

    for measurements of the confined fusion alpha particles in ITER set by the ITER team. Then we outline the considerations, which enter into the selection and evaluation of CTS systems. System definition includes choice of probe frequency, geometry of probe and receiver beam patterns and probe power, but ultimately...

  19. Experimental studies of ITER demonstration discharges

    NARCIS (Netherlands)

    Sips, A.C.C.; Casper, T. A.; Doyle, E. J.; Giruzzi, G.; Gribov, Y.; Hobirk, J.; Hogeweij, G. M. D.; Horton, L. D.; Hubbard, A. E.; Hutchinson, I.; Ide, S.; Isayama, A.; Imbeaux, F.; Jackson, G. L.; Kamada, Y.; Kessel, C.; Kochl, F.; Lomas, P.; Litaudon, X.; Luce, T. C.; Marmar, E.; Mattei, M.; Nunes, I.; Oyama, N.; Parail, V.; Portone, A.; Saibene, G.; Sartori, R.; Stober, J. K.; Suzuki, T.; Wolfe, S. M.

    2009-01-01

    Key parts of the ITER scenarios are determined by the capability of the proposed poloidal field (PF) coil set. They include the plasma breakdown at low loop voltage, the current rise phase, the performance during the flat top (FT) phase and a ramp down of the plasma. The ITER discharge evolution has

  20. Root canal cleaning through cavitation and microstreaming

    NARCIS (Netherlands)

    Verhaagen, B.

    2012-01-01

    We have investigated the flow from a needle using Computational Fluid Dynamics simulations and high-speed imaging experiments on sub-millimeter fluidic channels. These have shown that the flow is not effective in delivering the bleach near the bacteria, due to the complex geometry of the root canal.

  1. The crazy project – Canal Istanbul

    Directory of Open Access Journals (Sweden)

    Seda Kundak

    2011-10-01

    Full Text Available It was late April 2011 when “the Crazy Project - Canal Istanbul” was proposed by the Prime Minister of Turkey, during his election campaign.  Although the idea of an artificial canal is not new, since it is initiated without any consensus between the people and institutions in Istanbul, the project immediately set a large number of debates. These vary from the legitimacy of decentralization of governance, to potential impacts of the canal on international politics, economy, environment and urban life.  Regarding past infrastructure projects in Istanbul, such large scale investments have caused extensive acceleration in construction sector in one hand and social and economic shifts on the other.  In this paper, the Canal Istanbul Project is evaluated according to basic motivations and claims of the PM, multi-perspective view through challenges and limitation that the project is likely to face with and speculations on implementation approach. The final discussion on the project is based on benefits/losses of Istanbul once the project will be implemented.

  2. Note on Tendipedidae of the Suez Canal

    NARCIS (Netherlands)

    Kruseman, G.

    1949-01-01

    Mr. A. C. V. VAN BEMMEL and Dr. A. DIAKONOFF of the Buitenzorg Museum (Java) collected Tendipedidae, which were attracted by artificial lights, when they passed the Suez Canal on 8-XI-1937 and 16-V-1939 respectively. This very interesting collection, containing some new species, was sent to me for d

  3. Infrared tympanic temperature and ear canal morphology

    NARCIS (Netherlands)

    Daanen, H.A.M.

    2006-01-01

    Several publications indicate that the infrared tympanic temperature (IRTT) underestimates the core temperature of the body when the ear canal is long, curvy and narrow. In order to quantify these observations, a study was performed in 10 subjects. The IRTT was determined and compared to the oesopha

  4. Landweber iterative regularization for nearfield acoustic holography

    Institute of Scientific and Technical Information of China (English)

    BI Chuanxing; CHEN Xinzhao; ZHOU Rong; CHEN Jian

    2006-01-01

    On the basis of the distributed source boundary point method (DSBPM)-based nearfield acoustic holography (NAH), Landweber iterative regularization method is proposed to stabilize the NAH reconstruction process, control the influence of measurement errors on the reconstructed results and ensure the validity of the reconstructed results. And a new method, the auxiliary surface method, is proposed to determine the optimal iterative number for optimizing the regularization effect. Here, the optimal number is determined by minimizing the relative error between the calculated pressure on the auxiliary surface corresponding to each iterative number and the measured pressure. An experiment on a speaker is investigated to demonstrate the high sensitivity of the reconstructed results to measurement errors and to validate the chosen method of the optimal iterative number and the Landweber iterative regularization method for controlling the influence of measurement errors on the reconstructed results.

  5. Turbo iterative equalization for HSDPA systems

    Institute of Scientific and Technical Information of China (English)

    WU QiHui; ZHAO ChunMing; WANG JinLong

    2007-01-01

    In this paper, a turbo iterative receiver structure with chip equalization is proposed for the 3G high-speed downlink packet access (HSDPA) systems. The receiver equalizes the channel prior to the dispreading and then performs two successive soft-output decisions, achieved by a soft-input soft-output (SISO) multi-code detector and a SISO turbo decoder through an iterative process. At each iteration, extrinsic information is extracted from detection and decoding stages and is then used as a priori information in the next iteration, just as in turbo decoding. Computer simulations show that the turbo iterative receiver structure with chip equalization offers significant performance gain over the traditional receiver structure.

  6. Techniques in Iterative Proton CT Image Reconstruction

    CERN Document Server

    Penfold, Scott

    2015-01-01

    This is a review paper on some of the physics, modeling, and iterative algorithms in proton computed tomography (pCT) image reconstruction. The primary challenge in pCT image reconstruction lies in the degraded spatial resolution resulting from multiple Coulomb scattering within the imaged object. Analytical models such as the most likely path (MLP) have been proposed to predict the scattered trajectory from measurements of individual proton location and direction before and after the object. Iterative algorithms provide a flexible tool with which to incorporate these models into image reconstruction. The modeling leads to a large and sparse linear system of equations that can efficiently be solved by projection methods-based iterative algorithms. Such algorithms perform projections of the iterates onto the hyperlanes that are represented by the linear equations of the system. They perform these projections in possibly various algorithmic structures, such as block-iterative projections (BIP), string-averaging...

  7. MR determination of neonatal spinal canal depth

    Energy Technology Data Exchange (ETDEWEB)

    Arthurs, Owen, E-mail: owenarthurs@uk2.net [Centre for Cardiovascular MR, Great Ormond Street Hospital for Children, London WC1N 3JH (United Kingdom); Thayyil, Sudhin, E-mail: s.thayyil@ucl.ac.uk [Academic Neonatology, Institute for Women' s Health, London WC1E 6AU (United Kingdom); Wade, Angie, E-mail: a.wade@ucl.ac.uk [Centre for Paediatric Epidemiology and Biostatistics, UCL Institute of Child Health, London (United Kingdom); Chong, W.K., E-mail: Kling.Chong@gosh.nhs.uk [Paediatric Neuroradiology, Great Ormond Street Hospital for Children, London (United Kingdom); Sebire, Neil J., E-mail: Neil.Sebire@gosh.nhs.uk [Histopathology, Great Ormond Street Hospital for Children, London WC1E 6AU (United Kingdom); Taylor, Andrew M., E-mail: a.taylor76@ucl.ac.uk [Centre for Cardiovascular MR, Cardiorespiratory Unit, Great Ormond Street Hospital for Children and UCL Institute of Cardiovascular Science, London WC1E 6AU (United Kingdom)

    2012-08-15

    Objectives: Lumbar punctures (LPs) are frequently performed in neonates and often result in traumatic haemorrhagic taps. Knowledge of the distance from the skin to the middle of the spinal canal (mid-spinal canal depth - MSCD) may reduce the incidence of traumatic taps, but there is little data in extremely premature or low birth weight neonates. Here, we determined the spinal canal depth at post-mortem in perinatal deaths using magnetic resonance imaging (MRI). Patients and methods: Spinal canal depth was measured in 78 post-mortem foetuses and perinatal cases (mean gestation 26 weeks; mean weight 1.04 kg) at the L3/L4 inter-vertebral space at post-mortem MRI. Both anterior (ASCD) and posterior (PSCD) spinal canal depth were measured; MSCD was calculated and modelled against weight and gestational age. Results: ASCD and PSCD (mm) correlated significantly with weight and gestational age (all r > 0.8). A simple linear model MSCD (mm) = 3 Multiplication-Sign Weight (kg) + 5 was the best fit, identifying an SCD value within the correct range for 87.2% (68/78) (95% CI (78.0, 92.9%)) cases. Gestational age did not add significantly to the predictive value of the model. Conclusion: There is a significant correlation between MSCD and body weight at post-mortem MRI in foetuses and perinatal deaths. If this association holds in preterm neonates, use of the formula MSCD (mm) = 3 Multiplication-Sign Weight (kg) + 5 could result in fewer traumatic LPs in this population.

  8. Cervical spinal canal narrowing in idiopathic syringomyelia

    Energy Technology Data Exchange (ETDEWEB)

    Struck, Aaron F. [Massachusetts General Hospital, Department of Neurology, Boston, MA (United States); Carr, Carrie M. [Mayo Clinic, Department of Radiology, Rochester, MN (United States); Shah, Vinil [University of California San Francisco, Department of Radiology, San Francisco, CA (United States); Hesselink, John R. [University of California San Diego, Department of Radiology, San Diego, CA (United States); Haughton, Victor M. [University of Wisconsin, Department of Radiology, Madison, WI (United States)

    2016-08-15

    The cervical spine in Chiari I patient with syringomyelia has significantly different anteroposterior diameters than it does in Chiari I patients without syringomyelia. We tested the hypothesis that patients with idiopathic syringomyelia (IS) also have abnormal cervical spinal canal diameters. The finding in both groups may relate to the pathogenesis of syringomyelia. Local institutional review boards approved this retrospective study. Patients with IS were compared to age-matched controls with normal sagittal spine MR. All subjects had T1-weighted spin-echo (500/20) and T2-weighted fast spin-echo (2000/90) sagittal cervical spine images at 1.5 T. Readers blinded to demographic data and study hypothesis measured anteroposterior diameters at each cervical level. The spinal canal diameters were compared with a Mann-Whitney U test. The overall difference was assessed with a Friedman test. Seventeen subjects were read by two reviewers to assess inter-rater reliability. Fifty IS patients with 50 age-matched controls were studied. IS subjects had one or more syrinxes varying from 1 to 19 spinal segments. Spinal canal diameters narrowed from C1 to C3 and then enlarged from C5 to C7 in both groups. Diameters from C2 to C4 were narrower in the IS group (p < 0.005) than in controls. The ratio of the C3 to the C7 diameters was also smaller (p = 0.004) in IS than controls. Collectively, the spinal canal diameters in the IS were significantly different from controls (Friedman test p < 0.0001). Patients with IS have abnormally narrow upper and mid cervical spinal canal diameters and greater positive tapering between C3 and C7. (orig.)

  9. On the interplay between inner and outer iterations for a class of iterative methods

    Energy Technology Data Exchange (ETDEWEB)

    Giladi, E. [Stanford Univ., CA (United States)

    1994-12-31

    Iterative algorithms for solving linear systems of equations often involve the solution of a subproblem at each step. This subproblem is usually another linear system of equations. For example, a preconditioned iteration involves the solution of a preconditioner at each step. In this paper, the author considers algorithms for which the subproblem is also solved iteratively. The subproblem is then said to be solved by {open_quotes}inner iterations{close_quotes} while the term {open_quotes}outer iteration{close_quotes} refers to a step of the basic algorithm. The cost of performing an outer iteration is dominated by the solution of the subproblem, and can be measured by the number of inner iterations. A good measure of the total amount of work needed to solve the original problem to some accuracy c is then, the total number of inner iterations. To lower the amount of work, one can consider solving the subproblems {open_quotes}inexactly{close_quotes} i.e. not to full accuracy. Although this diminishes the cost of solving each subproblem, it usually slows down the convergence of the outer iteration. It is therefore interesting to study the effect of solving each subproblem inexactly on the total amount of work. Specifically, the author considers strategies in which the accuracy to which the inner problem is solved, changes from one outer iteration to the other. The author seeks the `optimal strategy`, that is, the one that yields the lowest possible cost. Here, the author develops a methodology to find the optimal strategy, from the set of slowly varying strategies, for some iterative algorithms. This methodology is applied to the Chebychev iteration and it is shown that for Chebychev iteration, a strategy in which the inner-tolerance remains constant is optimal. The author also estimates this optimal constant. Then generalizations to other iterative procedures are discussed.

  10. Iterants, Fermions and Majorana Operators

    Science.gov (United States)

    Kauffman, Louis H.

    Beginning with an elementary, oscillatory discrete dynamical system associated with the square root of minus one, we study both the foundations of mathematics and physics. Position and momentum do not commute in our discrete physics. Their commutator is related to the diffusion constant for a Brownian process and to the Heisenberg commutator in quantum mechanics. We take John Wheeler's idea of It from Bit as an essential clue and we rework the structure of that bit to a logical particle that is its own anti-particle, a logical Marjorana particle. This is our key example of the amphibian nature of mathematics and the external world. We show how the dynamical system for the square root of minus one is essentially the dynamics of a distinction whose self-reference leads to both the fusion algebra and the operator algebra for the Majorana Fermion. In the course of this, we develop an iterant algebra that supports all of matrix algebra and we end the essay with a discussion of the Dirac equation based on these principles.

  11. Active beam spectroscopy for ITER

    Energy Technology Data Exchange (ETDEWEB)

    Von Hellermann, M.; Giroud, C.; Jaspers, R. [Association Euratom-Fom, FOM Institute for Plasma Physics Rijnhuizen, Trilateral Euregio Cluster (Netherlands); Hawkes, N.C.; Mullane, M.O.; Zastrow, K.D. [Euratom/UKAEA Fusion Association, Culham Science Centre, Abingdon (United Kingdom); Krasilnikov, A.; Tugarinov, S. [SRC RF TRINITI, Troitsk, Moscow region (Russian Federation); Lotte, P. [Association Euratom-CEA Cadarache, 13 - Saint-Paul-lez-Durance (France). Dept. de Recherches sur la Fusion Controlee; McKee, G. [Wisconsin Univ., Madison, WI (United States); Malaquias, A. [Associacao EURATOM/IST, Instituto Superior Tecnico, Lisboa (Portugal); Rachlew, E. [Kungliga Tekniska Hoegskolan (KTH), Stockholm(Sweden)

    2003-07-01

    The latest status of 'Active Beam' related spectroscopy aspects as part of the ITER diagnostic scenario is presented. A key issue of the proposed scheme is based on the concept that in order to achieve the ultimate goal of global data consistency, all particles involved, that is, intrinsic and seeded impurity ions as well as helium ash ions and bulk plasma ions and also the plasma background data (e.g. magnetic and electric fields, electron density and temperature profiles) need to be addressed. A further sensible step in this direction is the decision of exploiting both a dedicated low-energy, low-power diagnostic beam (DNB, 2.2 MW 100 keV/amu) as well as the high-power, high-energy heating beams (HNB, 17 MW 500 keV/amu) for maximum diagnostic information. The authors report some new aspects referring to the use of DNB for motional Stark effect (MSE) where the main idea is to treat both beams (HNB and DNB) as potential diagnostic tools with complementary roles. The equatorial ports for the DNB promise excellent spatial resolution, however, the angles are less favourable for a polarimetric MSE exploitation. HNB can be used as probe beam for diagnosing slowing-down fusion alpha with a birth energy of 3,5 MeV.

  12. A statistical treatment of bioassay pour fractions

    Science.gov (United States)

    Barengoltz, Jack; Hughes, David

    A bioassay is a method for estimating the number of bacterial spores on a spacecraft surface for the purpose of demonstrating compliance with planetary protection (PP) requirements (Ref. 1). The details of the process may be seen in the appropriate PP document (e.g., for NASA, Ref. 2). In general, the surface is mechanically sampled with a damp sterile swab or wipe. The completion of the process is colony formation in a growth medium in a plate (Petri dish); the colonies are counted. Consider a set of samples from randomly selected, known areas of one spacecraft surface, for simplicity. One may calculate the mean and standard deviation of the bioburden density, which is the ratio of counts to area sampled. The standard deviation represents an estimate of the variation from place to place of the true bioburden density commingled with the precision of the individual sample counts. The accuracy of individual sample results depends on the equipment used, the collection method, and the culturing method. One aspect that greatly influences the result is the pour fraction, which is the quantity of fluid added to the plates divided by the total fluid used in extracting spores from the sampling equipment. In an analysis of a single sample’s counts due to the pour fraction, one seeks to answer the question: What is the probability that if a certain number of spores are counted with a known pour fraction, that there are an additional number of spores in the part of the rinse not poured. This is given for specific values by the binomial distribution density, where detection (of culturable spores) is success and the probability of success is the pour fraction. A special summation over the binomial distribution, equivalent to adding for all possible values of the true total number of spores, is performed. This distribution when normalized will almost yield the desired quantity. It is the probability that the additional number of spores does not exceed a certain value. Of course

  13. Dorello's Canal for Laymen: A Lego-Like Presentation.

    Science.gov (United States)

    Ezer, Haim; Banerjee, Anirban Deep; Thakur, Jai Deep; Nanda, Anil

    2012-06-01

    Objective Dorello's canal was first described by Gruber in 1859, and later by Dorello. Vail also described the anatomy of Dorello's canal. In the preceding century, Dorello's canal was clinically important, in understanding sixth nerve palsy and nowadays it is mostly important for skull base surgery. The understanding of the three dimensional anatomy, of this canal is very difficult to understand, and there is no simple explanation for its anatomy and its relationship with adjacent structures. We present a simple, Lego-like, presentation of Dorello's canal, in a stepwise manner. Materials and Methods Dorello's canal was dissected in five formalin-fixed cadaver specimens (10 sides). The craniotomy was performed, while preserving the neural and vascular structures associated with the canal. A 3D model was created, to explain the canal's anatomy. Results Using the petrous pyramid, the sixth nerve, the cavernous sinus, the trigeminal ganglion, the petorclival ligament and the posterior clinoid, the three-dimensional structure of Dorello's canal was defined. This simple representation aids in understanding the three dimensional relationship of Dorello's canal to its neighboring structures. Conclusion Dorello's canal with its three dimensional structure and relationship to its neighboring anatomical structures could be reconstructed using a few anatomical building blocks. This method simplifies the understanding of this complex anatomical structure, and could be used for teaching purposes for aspiring neurosurgeons, and anatomy students.

  14. Comparison of the rheological properties of four root canal sealers

    Institute of Scientific and Technical Information of China (English)

    Seok Woo Chang; Kwang Shik Bae; Young-Kyu Lee; Qiang Zhu; Won Jun Shon; Woo Cheol Lee; Kee Yeon Kum; Seung Ho Baek; In Bog Lee; Bum-Soon Lim

    2015-01-01

    The flowability of a root canal sealer is clinically important because it improves the penetration of the sealer into the complex root canal system. The purpose of this study was to compare the flowabilities of four root canal sealers, measured using the simple press method (ISO 6876), and their viscosities, measured using a strain-controlled rheometer. A newly developed, calcium phosphate-based root canal sealer (Capseal) and three commercial root canal sealers (AH Plus, Sealapex and Pulp Canal Sealer EWT) were used in this study. The flowabilities of the four root canal sealers were measured using the simple press method (n55) and their viscosities were measured using a strain-controlled rheometer (n55). The correlation between these two values was statistically analysed using Spearman’s correlation test. The flow diameters and the viscosities of the root canal sealers were strongly negatively correlated (r520.8618). The viscosity of Pulp Canal Sealer EWT was the lowest and increased in the following order:AH Plus,Sealapex,Capseal (P,0.05). All of the tested root canal sealers showed characteristic time-and temperature-dependent changes in their rheological properties. The viscosities measured using the strain-controlled rheometer were more precise than the flowabilities measured using the simple press method, suggesting that the rheometer can accurately measure the rheological properties of root canal sealers.

  15. Research on Canal System Operation Based on Controlled Volume Method

    Directory of Open Access Journals (Sweden)

    Zhiliang Ding

    2009-10-01

    Full Text Available An operating simulation mode based on storage volume control method for multireach canal system in series was established. In allusion to the deficiency of existing controlled volume algorithm, the improved algorithm was proposed, that is the controlled volume algorithm of whole canal pools, the simulation results indicate that the storage volume and water level of each canal pool can be accurately controlled after the improved algorithm was adopted. However, for some typical discharge demand change operating conditions of canal, if the controlled volume algorithm of whole canal pool is still adopted, then it certainly will cause some unnecessary regulation, and consequently increases the disturbed canal reaches. Therefor, the idea of controlled volume operation method of continuous canal pools was proposed, and its algorithm was designed. Through simulation to practical project, the results indicate that the new controlled volume algorithm proposed for typical operating condition can comparatively obviously reduce the number of regulated check gates and disturbed canal pools for some typical discharge demand change operating conditions of canal, thus the control efficiency of canal system was improved. The controlled volume method of operation is specially suitable for large-scale water delivery canal system which possesses complex operation requirements.

  16. Newton—Like Iteration Method for Solving Algebraic Equations

    Institute of Scientific and Technical Information of China (English)

    JihuanHE

    1998-01-01

    In this paper,a Newton-like iteration method is proposed to solve an approximate solution of an algebraic equation.The iteration formula obtained by homotopy perturbation method contains the well-known Newton iteration formulain logic.

  17. Frozen Landweber Iteration for Nonlinear Ill-Posed Problems

    Institute of Scientific and Technical Information of China (English)

    J.Xu; B.Han; L.Li

    2007-01-01

    In this paper we propose a modification of the Landweber iteration termed frozen Landweber iteration for nonlinear ill-posed problems.A convergence analysis for this iteration is presented.The numerical performance of this frozen Landweber iteration for a nonlinear Hammerstein integral equation is compared with that of the Landweber iteration.We obtain a shorter running time of the frozen Landweber iteration based on the same convergence accuracy.

  18. Halpern Iteration in CAT(κ) Spaces

    Institute of Scientific and Technical Information of China (English)

    Bo(z)ena PI(A)TEK

    2011-01-01

    In this paper we show that an iterative sequence generated by the Halpern algorithm converges to a fixed point in the case of complete CAT(κ) spaces. Similar results for Hadamard manifolds were obtained in[Li,C.,López, G., Martín-Márquez, V.:Iterative algorithms for nonexpansive mappings on Hadamard manifolds. Taiwanese J. Math., 14, 541-559 (2010)], but we study a much more general case. Moreover, we discuss the Halpern iteration procedure for set-valued mappings.

  19. Iterative restoration algorithms for nonlinear constraint computing

    Science.gov (United States)

    Szu, Harold

    A general iterative-restoration principle is introduced to facilitate the implementation of nonlinear optical processors. The von Neumann convergence theorem is generalized to include nonorthogonal subspaces which can be reduced to a special orthogonal projection operator by applying an orthogonality condition. This principle is shown to permit derivation of the Jacobi algorithm, the recursive principle, the van Cittert (1931) deconvolution method, the iteration schemes of Gerchberg (1974) and Papoulis (1975), and iteration schemes using two Fourier conjugate domains (e.g., Fienup, 1981). Applications to restoring the image of a double star and division by hard and soft zeros are discussed, and sample results are presented graphically.

  20. Structural analysis of the ITER Vacuum Vessel regarding 2012 ITER Project-Level Loads

    Energy Technology Data Exchange (ETDEWEB)

    Martinez, J.-M., E-mail: jean-marc.martinez@live.fr [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul lez Durance (France); Jun, C.H.; Portafaix, C.; Choi, C.-H.; Ioki, K.; Sannazzaro, G.; Sborchia, C. [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul lez Durance (France); Cambazar, M.; Corti, Ph.; Pinori, K.; Sfarni, S.; Tailhardat, O. [Assystem EOS, 117 rue Jacquard, L' Atrium, 84120 Pertuis (France); Borrelly, S. [Sogeti High Tech, RE2, 180 rue René Descartes, Le Millenium – Bat C, 13857 Aix en Provence (France); Albin, V.; Pelletier, N. [SOM Calcul – Groupe ORTEC, 121 ancien Chemin de Cassis – Immeuble Grand Pré, 13009 Marseille (France)

    2014-10-15

    Highlights: • ITER Vacuum Vessel is a part of the first barrier to confine the plasma. • ITER Vacuum Vessel as Nuclear Pressure Equipment (NPE) necessitates a third party organization authorized by the French nuclear regulator to assure design, fabrication, conformance testing and quality assurance, i.e. Agreed Notified Body (ANB). • A revision of the ITER Project-Level Load Specification was implemented in April 2012. • ITER Vacuum Vessel Loads (seismic, pressure, thermal and electromagnetic loads) were summarized. • ITER Vacuum Vessel Structural Margins with regards to RCC-MR code were summarized. - Abstract: A revision of the ITER Project-Level Load Specification (to be used for all systems of the ITER machine) was implemented in April 2012. This revision supports ITER's licensing by accommodating requests from the French regulator to maintain consistency with the plasma physics database and our present understanding of plasma transients and electro-magnetic (EM) loads, to investigate the possibility of removing unnecessary conservatism in the load requirements and to review the list and definition of incidental cases. The purpose of this paper is to present the impact of this 2012 revision of the ITER Project-Level Load Specification (LS) on the ITER Vacuum Vessel (VV) loads and the main structural margins required by the applicable French code, RCC-MR.

  1. Clinical applications of iterative reconstruction

    Energy Technology Data Exchange (ETDEWEB)

    Eberl, S. [Royal Prince Alfred Hospital, Camperdown, NSW (Australia). Department of PET and Nuclear Medicine

    1998-03-01

    Expectation maximisation (EM) reconstruction largely eliminates the hot and cold streaking artifacts characteristic of filtered-back projection (FBP) reconstruction around localised hot areas, such as the bladder. It also substantially reduces the problem of decreased inferior wall counts in MIBI myocardial perfusion studies due to ``streaking`` from high liver uptake. Non-uniform attenuation and scatter correction, resolution recovery, anatomical information, e.g. from MRI or CT tracer kinetic modelling, can all be built into the EM reconstruction imaging model. The properties of ordered subset EM (OSEM) have also been used to correct for known patient motion as part of the reconstruction process. These uses of EM are elaborated more fully in some of the other abstracts of this meeting. Currently we use OSEM routinely for: (i) studies where streaking is a problem, including all MIBI myocardial perfusion studies, to avoid hot liver inferior wall artifact, (ii) all whole body FDG PET, all lung V/Q SPECT (which have a short acquisition time) and all gated {sup 201}TI myocardial perfusion studies due to improved noise characteristics of OSEM in these studies; (iii) studies with measured, non-uniform attenuation correction. With the accelerated OSEM algorithm, iterative reconstruction is practical for routine clinical applications and we have found OSEM to provide clearly superior reconstructions for the areas listed above and are investigating its application to other studies. In clinical use, we have not found OSEM to introduce artifacts which would not also occur with FBP, e.g. uncorrected patient motion will cause artifacts with both OSEM and FBP.

  2. Water quality of the Boca Raton canal system and effects of the Hillsboro Canal inflow, southeastern Florida, 1990-91

    Science.gov (United States)

    McKenzie, D.J.

    1995-01-01

    The City of Boca Raton in southeastern Palm Beach County, Florida, is an urban residential area that has sustained a constant population growth with subsequent increase in water use. The Boca Raton network of canals is controlled to provide for drainage of excess water, to maintain proper coastal ground-water levels to prevent saltwater intrusion, and to recharge the surficial aquifer system from which the city withdraws potable water. Most of the water supplied to the Boca Raton canal system and the surficial aquifer system, other than rainfall and runoff, is pumped from the Hillsboro Canal. The Biscayne aquifer, principal hydrogeologic unit of the surficial aquifer system, is highly permeable and there is a close relation between water levels in the canals and the aquifer. The amount of water supplied by seepage from the conservation areas is unknown. Because the Hillsboro Canal flows from Lake Okeechobee and Water Conservation Areas 1 and 2, which are places of more highly mineralized ground water and surface water, the canal is a possible source of contamination. Water samples were collected at 10 canal sites during wet and dry seasons and analyzed for major inorganic ions and related characteristics, nutrients, and trace elements. All concentrations were generally within or less than the drinking-water standards established by the Florida Department of Environmental Protection. The high concentrations of sodium and chloride that were detected in samples from the Boca Raton canal system are probably from the more mineralized water of the Hillsboro Canal. Other water-quality data, gathered from various sources from 1982 through 1991, did not indicate any significant changes nor trends. The effects of the Hillsboro Canal on the water quality of the Boca Raton canal system are indicated by increased concentrations of sodium, chloride, dissolved solids, and total organic carbon. Concentrations of the constituents in the canal water generally decrease with distance

  3. Inequality and megaprojects: The Panama Canal expansion

    OpenAIRE

    2006-01-01

    Cuando el control y gestión del Canal de Panamá pasó al estado panameño a finales de 1999, el gobierno comenzó a preparar un plan para su modernización. Este plan incluía la construcción de nuevas esclusas para que pudieran atravesarlo un mayor número de barcos y que admitiese los nuevos buques Post-Panamax de gran tamaño. El proyecto de Ampliación del Canal se ha seleccionado como ejemplo paradigmático de grandes Obras Públicas (GOP) por su impacto ambiental, económico y social. Este caso de...

  4. Anal cancer; Cancer du canal anal

    Energy Technology Data Exchange (ETDEWEB)

    Fesneau, M.; Champeaux-Orange, E. [Service de radiotherapie, Centre regional universitaire de cancerologie Henry-S.-Kaplan CHU de Tours, Hopital Bretonneau, 37 - Tours (France); Champeaux-Orange, E. [Service d' oncologie-radiotherapie, Centre hospitalier regional d' Orleans, 45 - Orleans (France); Hennequin, C. [Service de cancerologie-radiotherapie, hopital Saint-Louis, 75 - Paris (France)

    2010-07-01

    Anal canal epidermoid carcinomas represent 1.2% of digestive cancers and 6% of ano-rectal cancers. For localized diseases, the treatment is based on radiotherapy with or without chemotherapy (5-FU and cisplatin or mitomycin), according to tumour and nodal extension. The recommended treatment dose is 45 Gy in the anal canal, the mesorectum, para-rectal lymph nodes, and inguinal lymph nodes. An additional dose of 15 to 20 Gy is delivered in the initial tumour for good responders. Salvage surgery is necessary in case of poor response. The organs at risk to be considered are bladder, femur heads, small intestine and vulva. The objective of this work is to summarize the epidemiological and radio-anatomic and prognostic characteristics of this tumour. The conformal radiotherapy technique is illustrated by a case report. (authors)

  5. Squamous cell carcinoma of the anal canal.

    LENUS (Irish Health Repository)

    Martin, F T

    2012-01-31

    Squamous cell carcinoma ofthe anal canal represents 1.5% of all malignancies affectingthe gastrointestinal tract. Over the past 20 years dramatic changes have been seen in both the epidemiological distribution of the disease and in the therapeutic modalities utilised to manage it. CLINICAL MANAGEMENT: Historically abdominoperineal resection had been the treatment of choice with local resection reserved for early stage disease. Work by Nigro et al. has revolutionised how we currently manage carcinoma of the anal canal, demonstrating combined modality chemoradiotherapy as an appropriate alternative to surgical resection with the benefit of preserving sphincter function. Surgery is then reserved for recurrent disease with salvage abdominoperineal resection. This article reviews current literature and highlights the changing therapeutic modalities with selected clinical cases

  6. The shape of the human lumbar vertebral canal A forma do canal vertebral lombar humano

    Directory of Open Access Journals (Sweden)

    Edmundo Zarzur

    1996-09-01

    Full Text Available Literature on the anatomy of the human vertebral column characterizes the shape of the lumbar vertebral canal as triangular. The purpose of the present study was to determine the precise shape of the lumbar vertebral canal. Ten lumbar vertebral columns of adult male cadavers were dissected. Two transverse sections were performed in the third lumbar vertebra. One section was performed at the level of the lower border of the ligamenta flava, and the other section was performed at the level of the pedicles. The shape of the lumbar vertebral canal at the level of the pedicles tends to be oval or circular, whereas the shape of the lumbar vertebral canal at the level of the lower border of the ligamenta flava is triangular. Thus, the shape of the human lumbar vertebral canal is not exclusively triangular, as reported in the literature. It is related to the level of the transversal section performed on the lumbar vertebra. This finding should be taken into consideration among factors involved in the spread of solutions introduced into the epidural space.A literatura sobre a anatomia da coluna vertebral descreve como sendo triangular o formato do canal vertebral na região lombar. O objetivo deste estudo é determinar a real forma do canal da coluna vertebral lombar.Dez colunas vertebrais de cadáveres de homens adultos foram dissecadas. Dois cortes transversais foram executados na terceira vértebra lombar. Um corte foi feito no nível das bordas inferiores de dois ligamentos amarelos vizinhos e o outro corte foi transversal, no nível dos pedículos. A forma do canal vertebral variou: no nível dos pedículos ela tende a ser oval ou circular e junto às bordas inferiores dos ligamentos amarelos passa a ser triangular. Portanto, a forma do canal vertebral lombar não é somente triangular; ela depende do nível em que se faz o corte transversal da vértebra. Estes achados devem ser levados em consideração entre os fatores envolvidos na difusão das

  7. Effect of two contemporary root canal sealers on root canal dentin microhardness

    Science.gov (United States)

    2017-01-01

    Background Successful root canal treatment depends on proper cleaning, disinfecting and shaping of the root canal space. Pulpless teeth have lower dentin microhardness value compared to that of vital teeth. A material which can cause change in dentin composition may affect the microhardness. Thus the aim of this study was to evaluate and compare the effect of two root canal sealers on dentin microhardness. Material and Methods Forty two single rooted teeth were selected and divided into 3 equal groups; Apexit, iRootSP and control groups (n=14) Each group was then divided into 2 subgroups according to the post evaluation period; 1 week and 2 months (n=7). Root canal procedure was done in the experimental groups and obturation was made using either; Apexit, iRootSP or left unprepared and unobturated in the control group. Roots were sectioned transversely into cervical, middle and apical segments. The three sections of each root were mounted in a plastic chuck with acrylic resin. The coronal dentin surfaces of the root segments werepolished. Microhardness of each section was measured at 500 µm and 1000 µm from the canal lumen. Results Four way-ANOVA revealed that different tested sealer materials, canal third, measuring distance from the pulp and time as independent variables had statistically non significant effect on mean microhardness values (VHN) at p≤0.001. Among iRootSP groups there was a statistically significant difference between iRoot SP at coronal root portion (87.79±17.83) and iRoot SP at apical root portion (76.26±9.33) groups where (p=0.01). IRoot SP at coronal canal third had higher statistically significant mean microhardness value (87.79±17.83) compared to Apexit at coronal third (73.61±13.47) where (p=0.01). Conclusions Root canal sealers do not affect dentin microhardness. Key words:Root canal, dentin, sealers, microhardness, bioceramic. PMID:28149466

  8. Lesions in the external auditory canal

    Directory of Open Access Journals (Sweden)

    Priyank S Chatra

    2011-01-01

    Full Text Available The external auditory canal is an S- shaped osseo-cartilaginous structure that extends from the auricle to the tympanic membrane. Congenital, inflammatory, neoplastic, and traumatic lesions can affect the EAC. High-resolution CT is well suited for the evaluation of the temporal bone, which has a complex anatomy with multiple small structures. In this study, we describe the various lesions affecting the EAC.

  9. Carotid canal dehiscence in the human skull

    Energy Technology Data Exchange (ETDEWEB)

    Pastor Vazquez, J.F.; Gil Verona, J.A. [Department of Anatomy, Faculty of Medicine, University of Valladolid, Ramon y Cajal, 7, E-47005 Valladolid (Spain); Garcia Porrero, M. [Department of Radiology, Faculty of Medicine, University of Valladolid (Spain)

    1999-06-01

    Abnormalities of the floor of the carotid canal have been studied in 538 skulls. These abnormalities range from a fissure to total absence of the floor. This variation may be caused by abnormalities of the internal carotid artery or deficiencies in ossification of the skull base. CT suggests that these changes should be taken into account by surgeons working on the skull base. (orig.) With 4 figs., 8 refs.

  10. Splendid Culture on the Grand Canal

    Institute of Scientific and Technical Information of China (English)

    1993-01-01

    JINING Prefecture on thesouthwest plain of ShandongProvince is known as the homeof Confucius and Mencins and theland of etiquette.It is famous as thebirthplace or residence of many out-standing people and has beautifulscenery with blue Weishan Lake tothe south,lofty Mount Tai to thenorth and Liang Mountain by thelake in the west.The Beijing-Hangzhor Grand Canal crosses theprefecture,which has been a com-munications hub between north andsouth China since the Ming

  11. Koebner phenomenon of the ear canal skin.

    LENUS (Irish Health Repository)

    Young, O

    2009-02-01

    The Koebner phenomenon originally described the appearance of psoriatic lesions in the uninvolved skin of patients with psoriasis as a consequence of trauma. We describe a case of concurrent lichen planus and sarcoidosis in the auditory canal, which represents an unusual manifestation of the Koebner phenomenon. This is the first case of concurrent lichen planus and sarcoidosis in the head and neck region and highlights the need for biopsy to allow accurate histopathological diagnosis and treatment.

  12. Koebner phenomenon of the ear canal skin.

    LENUS (Irish Health Repository)

    Young, O

    2012-02-01

    The Koebner phenomenon originally described the appearance of psoriatic lesions in the uninvolved skin of patients with psoriasis as a consequence of trauma. We describe a case of concurrent lichen planus and sarcoidosis in the auditory canal, which represents an unusual manifestation of the Koebner phenomenon. This is the first case of concurrent lichen planus and sarcoidosis in the head and neck region and highlights the need for biopsy to allow accurate histopathological diagnosis and treatment.

  13. Root canal filling using Resilon: a review.

    LENUS (Irish Health Repository)

    Shanahan, D J

    2011-07-01

    Root canal treatment is achieved by chemo-mechanical debridement of the root canal system followed by filling. The filling material \\'entombs\\' residual bacteria and acts as a barrier which prevents the entrance of oral microorganisms and reinfection of the root canal system through microleakage. However, filling with contemporary root filling materials such as gutta-percha offers limited long-term resistance to microorganisms; as a result other materials such as Resilon have been investigated as alternatives. The aim of this review was to analyse the literature to consider whether Resilon is a suitable root canal filling material. A MEDLINE and Cochrane library search including various keyword searches identified several papers which investigated or discussed Resilon or RealSeal\\/Epiphany. Analysis of the literature demonstrated that the bulk of the literature is in vitro in nature, based largely on leakage-type studies, and demonstrates a wide variety of methodologies with conflicting findings; as a result meaningful conclusions are difficult. Within the limit of these in vitro studies Resilon appears to perform adequately in comparison to gutta-percha, however, as a result of the questionable merit of such studies, it cannot presently be considered an evidence-based alternative to the current gold standard gutta-percha. It is imperative that before Resilon is considered as a replacement material, a better understanding of the physical properties of the resin sealer and the reality of the adhesive \\'monoblock\\' are elucidated. The literature also demonstrates a paucity of quality long-term clinical outcome studies which will need to be addressed before firm conclusions can be reached.

  14. Status and verification strategy for ITER neutronics

    Energy Technology Data Exchange (ETDEWEB)

    Loughlin, Michael, E-mail: michael.loughlin@iter.org [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France); Angelone, Maurizio [Associazione EURATOM-ENEA Sulla Fusione, Via E. Fermi 45, I-00044 Frascati, Roma (Italy); Batistoni, Paola [Associazione EURATOM-ENEA Sulla Fusione, Via E. Fermi 45, I-00044 Frascati, Roma (Italy); JET-EFDA, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Bertalot, Luciano [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France); Eskhult, Jonas [Studsvik Nuclear AB, SE-611 Nyköping (Sweden); Konno, Chikara [Japan Atomic Energy Agency Tokai-mura, Naka-gun, Ibaraki-ken 319-1195 (Japan); Pampin, Raul [F4E Fusion for Energy, Josep Pla 2, Torres Diagonal Litoral B3, Barcelona 08019 (Spain); Polevoi, Alexei; Polunovskiy, Eduard [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France)

    2014-10-15

    The paper summarizes the current status of neutronics at ITER and a first set of proposals for experimental programmes to be conducted in the early operational life-time of ITER are described for the more crucial areas. These include a TF coils heating benchmark, a streaming benchmark and streaming measurements by activation on ITER itself. Also on ITER the measurement of activated water from triton burn-up should be planned and performed. This will require the measurement of triton burn-up in DD phase. Measurements of neutron flux in the tokamak building during DD operations should also be carried out. The use of JET for verification of shut down dose rate estimates is desirable. Other facilities to examine the production and behaviour of activated corrosion products and the shielding properties of concretes to high energy (6 MeV) gamma-rays are recommended.

  15. Accelerating Iterative Big Data Computing Through MPI

    Institute of Scientific and Technical Information of China (English)

    梁帆; 鲁小亿

    2015-01-01

    Current popular systems, Hadoop and Spark, cannot achieve satisfied performance because of the inefficient overlapping of computation and communication when running iterative big data applications. The pipeline of computing, data movement, and data management plays a key role for current distributed data computing systems. In this paper, we first analyze the overhead of shuffle operation in Hadoop and Spark when running PageRank workload, and then propose an event-driven pipeline and in-memory shuffle design with better overlapping of computation and communication as DataMPI-Iteration, an MPI-based library, for iterative big data computing. Our performance evaluation shows DataMPI-Iteration can achieve 9X∼21X speedup over Apache Hadoop, and 2X∼3X speedup over Apache Spark for PageRank and K-means.

  16. Anderson Acceleration for Fixed-Point Iterations

    Energy Technology Data Exchange (ETDEWEB)

    Walker, Homer F. [Worcester Polytechnic Institute, MA (United States)

    2015-08-31

    The purpose of this grant was to support research on acceleration methods for fixed-point iterations, with applications to computational frameworks and simulation problems that are of interest to DOE.

  17. On the safety of ITER accelerators.

    Science.gov (United States)

    Li, Ge

    2013-01-01

    Three 1 MV/40A accelerators in heating neutral beams (HNB) are on track to be implemented in the International Thermonuclear Experimental Reactor (ITER). ITER may produce 500 MWt of power by 2026 and may serve as a green energy roadmap for the world. They will generate -1 MV 1 h long-pulse ion beams to be neutralised for plasma heating. Due to frequently occurring vacuum sparking in the accelerators, the snubbers are used to limit the fault arc current to improve ITER safety. However, recent analyses of its reference design have raised concerns. General nonlinear transformer theory is developed for the snubber to unify the former snubbers' different design models with a clear mechanism. Satisfactory agreement between theory and tests indicates that scaling up to a 1 MV voltage may be possible. These results confirm the nonlinear process behind transformer theory and map out a reliable snubber design for a safer ITER.

  18. Archimedes' Pi--An Introduction to Iteration.

    Science.gov (United States)

    Lotspeich, Richard

    1988-01-01

    One method (attributed to Archimedes) of approximating pi offers a simple yet interesting introduction to one of the basic ideas of numerical analysis, an iteration sequence. The method is described and elaborated. (PK)

  19. Stability of Jungck-type iterative procedures

    Directory of Open Access Journals (Sweden)

    S. L. Singh

    2005-01-01

    Full Text Available We introduce and discuss the stability of Jungck and Jungck-Mann iterative procedures for a pair of Jungck-Osilike-type maps on an arbitrary set with values in a metric or linear metric space.

  20. Pour une Écologie des Somatiques?

    Directory of Open Access Journals (Sweden)

    Isabelle

    2014-12-01

    Full Text Available Ce texte traite de la parenté conceptuelle et théorique entre Somatiques et Écologie scientifique. Après une définition de la notion scientifique d’écologie, il s’attache à définir trois notions clés de l’écologie: celle de potentiel, qui permet de décrire de façon innovante le modèle de relation entre sujet et environnement au sein des Somatiques, et celles de diversité et de réciprocité, à partir desquelles l’article se veut une invitation et un programme à penser l’intégration des Somatiques au paradigme écologique scientifique, et en appelle aux acteurs somatiques pour transformer leurs pratiques selon une éthique environnementale.

  1. A lunguistica pour ses quarante ans

    Directory of Open Access Journals (Sweden)

    Ludvik Horvat Le Doyen

    2000-12-01

    Full Text Available En tant que doyen de la Faculté des Lettres de l'Universite de Ljubljana, j'ai l'honneur d'introduire le volume qui celebre les quarante ans de publication de cette revue linguistique. La parution de la revue conçua à l' origine comme supplàment pour la linguistique non slave de la revue Slavistična revija (dont la renommée était déjà affirmée, eut lieu en 1958. Ses inspirateurs, ses fondateurs et ses premiers directeurs, auxquels nous gardons une profonde reconnaissance, furent l'italianiste Stanko Škerlj et le latiniste Milan Grošelj, professeurs de notre Faculté. Des sa quatrieme année ce modeste supplement devint revue autonome, telle que nous la connaissons aujourd'hui.

  2. Efficient iterative adaptive pole placement algorithm

    Institute of Scientific and Technical Information of China (English)

    李俊民; 李靖; 杨磊

    2004-01-01

    An iterative adaptive pole placement algorithm is presented. The stability and the convergence of the algorithm are respectively established. Since one-step iterative formulation in computing controller's parameters is used, the on-line computation cost is greatly reduced with respected to the traditional algorithm. The algorithm with the feed-forward can follow arbitrarily bounded output. The algorithm is also extended to multivariate case. Simulation examples show the efficiency and robustness of the algorithm.

  3. Accelerated Schwarz iterations for Helmholtz equation

    Science.gov (United States)

    Nagid, Nabila; Belhadj, Hassan; Amattouch, Mohamed Ridouan

    2017-01-01

    In this paper, the Restricted additive Schwarz (RAS) method is applied to solve Helmholtz equation. To accelerate the RAS iterations, we propose to apply the vector ɛ-algorithm. Some convergence analysis of the proposed method is presented, and applied succeffully to Helmholtz problem. The obtained results show the efficiency of the proposed approach. Moreover, the algorithm yields much faster convergence than the classical Schwarz iterations.

  4. Iterative consolidation of unorganized point clouds.

    Science.gov (United States)

    Liu, Shengjun; Chan, Kwan-Chung; Wang, Charlie C L

    2012-01-01

    Unorganized point clouds obtained from 3D shape acquisition devices usually present noise, outliers, and nonuniformities. The proposed framework consolidates unorganized points through an iterative procedure of interlaced downsampling and upsampling. Selection operations remove outliers while preserving geometric details. The framework improves the uniformity of points by moving the downsampled particles and refining point samples. Surface extrapolation fills missed regions. Moreover, an adaptive sampling strategy speeds up the iterations. Experimental results demonstrate the framework's effectiveness.

  5. Novel aspects of plasma control in ITER

    Energy Technology Data Exchange (ETDEWEB)

    Humphreys, D.; Jackson, G.; Walker, M.; Welander, A. [General Atomics P.O. Box 85608, San Diego, California 92186-5608 (United States); Ambrosino, G.; Pironti, A. [CREATE/University of Naples Federico II, Napoli (Italy); Vries, P. de; Kim, S. H.; Snipes, J.; Winter, A.; Zabeo, L. [ITER Organization, St. Paul Lez durance Cedex (France); Felici, F. [Eindhoven University of Technology, Eindhoven (Netherlands); Kallenbach, A.; Raupp, G.; Treutterer, W. [Max-Planck Institut für Plasmaphysik, Garching (Germany); Kolemen, E. [Princeton Plasma Physics Laboratory, Princeton, New Jersey 08543-0451 (United States); Lister, J.; Sauter, O. [Centre de Recherches en Physique des Plasmas, Ecole Polytechnique Federale de Lausanne, Lausanne (Switzerland); Moreau, D. [CEA, IRFM, 13108 St. Paul-lez Durance (France); Schuster, E. [Lehigh University, Bethlehem, Pennsylvania (United States)

    2015-02-15

    ITER plasma control design solutions and performance requirements are strongly driven by its nuclear mission, aggressive commissioning constraints, and limited number of operational discharges. In addition, high plasma energy content, heat fluxes, neutron fluxes, and very long pulse operation place novel demands on control performance in many areas ranging from plasma boundary and divertor regulation to plasma kinetics and stability control. Both commissioning and experimental operations schedules provide limited time for tuning of control algorithms relative to operating devices. Although many aspects of the control solutions required by ITER have been well-demonstrated in present devices and even designed satisfactorily for ITER application, many elements unique to ITER including various crucial integration issues are presently under development. We describe selected novel aspects of plasma control in ITER, identifying unique parts of the control problem and highlighting some key areas of research remaining. Novel control areas described include control physics understanding (e.g., current profile regulation, tearing mode (TM) suppression), control mathematics (e.g., algorithmic and simulation approaches to high confidence robust performance), and integration solutions (e.g., methods for management of highly subscribed control resources). We identify unique aspects of the ITER TM suppression scheme, which will pulse gyrotrons to drive current within a magnetic island, and turn the drive off following suppression in order to minimize use of auxiliary power and maximize fusion gain. The potential role of active current profile control and approaches to design in ITER are discussed. Issues and approaches to fault handling algorithms are described, along with novel aspects of actuator sharing in ITER.

  6. A steerable ECRF launcher for ITER

    Energy Technology Data Exchange (ETDEWEB)

    Grunloh, H.; Prater, R.; Doane, J.L.; Moeller, C.P. [General Atomics, San Diego (United States); Makowski, M. [ITER Joint Work Site, Garching (Germany)

    1998-07-01

    A design is proposed to steer the electron cyclotron heating and current drive power for ITER using rotatable, water-cooled mirrors and long-pressure hydraulic actuators, and to accommodate changes in length of the waveguide when the temperatures of the vacuum vessel and the cryostat change using waveguide bellows. An alternative concept is also introduced that requires no moving parts within the ITER cryostat and that utilizes wave reconstruction within the waveguide to effect the steering. (author)

  7. Experiences with iterated traffic microsimulations in Dallas

    CERN Document Server

    Nagel, K

    1997-01-01

    This paper reports experiences with iterated traffic microsimulations in the context of a Dallas study. ``Iterated microsimulations'' here means that the information generated by a microsimulation is fed back into the route planner so that the simulated individuals can adjust their routes to circumvent congestion. This paper gives an overview over what has been done in the Dallas context to better understand the relaxation process, and how to judge the robustness of the results.

  8. Development and test of prototype components for ITER; Entwicklung und Test von Prototypkomponenten fuer ITER

    Energy Technology Data Exchange (ETDEWEB)

    Biel, Wolfgang; Behr, Wilfried; Castano-Bardawil, David; and others

    2015-08-15

    The scientific program of the project is divided into the following partial projects: (1.) ITER Diagnostic Port Plug for the charge-exchange spectroscopy (CXRS) with the subthemes: (a) Development of prototypes for critical mechanical components, (b) development of a roboter for the laser welding of vacuum seals and pipings at the Port Plug, (c) mirror studies, (d) CXRS prototype spectrometer, (2.) ITER tritium retention diagnostics (TR), (3.) ITER disruption mitigation ventile (DMV).

  9. ITER Remote Maintenance System (IRMS) lifecycle management

    Energy Technology Data Exchange (ETDEWEB)

    Tesini, Alessandro, E-mail: alessandro.tesini@iter.org [ITER Organization, CS 90 046, 13067 St. Paul Lez Durance Cedex (France); Otto' , Bede [Oxford Technologies Ltd, 7, Nuffield Way, Abingdon, Oxon OX14 1RJ (United Kingdom); Blight, John [FAAST 31c Allee de la Granette, 13600 Ceyreste (France); Choi, Chang-Hwan; Friconneau, Jean-Pierre; Gotewal, Krishan Kumar; Hamilton, David [ITER Organization, CS 90 046, 13067 St. Paul Lez Durance Cedex (France); Heckendorn, Frank [FD Technologies, PO Box 6686, Aiken, SC (United States); Martins, Jean-Pierre [ITER Organization, CS 90 046, 13067 St. Paul Lez Durance Cedex (France); Marty, Thomas [Westinghouse, 122, avenue de Hambourg, 13008 Marseille (France); Nakahira, Masataka; Palmer, Jim; Subramanian, Rajendran [ITER Organization, CS 90 046, 13067 St. Paul Lez Durance Cedex (France)

    2011-10-15

    The availability of the ITER machine to perform its scientific program is strongly dependent on the performance of the different Remote Handling (RH) systems constituting the ITER Remote Maintenance System (IRMS). The lifecycle of the IRMS will largely exceed 40 years from initial concept design and proof testing through to machine decommissioning. Such a long lifecycle requires that a rigorous approach is put in place to guarantee the technical capabilities of the highly innovative IRMS, its efficiency and its availability. For this purpose, an IRMS System Engineering and IRMS lifecycle management approach has been adopted by ITER. The approach aims at ensuring the IRMS full operability and availability at an acceptable cost of ownership over the full ITER machine assembly and operations period. The IRMS lifecycle management method described in this paper covers such subjects as specific requirements for IRMS design reviews, monitoring during manufacture, factory and site acceptance testing, integrated commissioning, decontamination, maintenance and re-qualification strategies, requirements for Integrated Logistical Support during operations. The updating and implementation of the IRMS lifecycle strategy and this procedure will be managed and monitored by the Remote Handling Integrated Product Team (RH-IPT). Although developed for the IRMS, the basic principles and procedures of lifecycle management could be applied to other ITER plant systems whose reliability and availability will be essential for the continued operation of the ITER machine.

  10. Defining the Location of the Adductor Canal Using Ultrasound

    DEFF Research Database (Denmark)

    Wong, Wan Yi; Bjørn, Siska; Strid, Jennie Maria Christin;

    2016-01-01

    BACKGROUND AND OBJECTIVES: The precise location of the adductor canal remains controversial among anesthesiologists. In numerous studies of the analgesic effect of the so-called adductor canal block for total knee arthroplasty, the needle insertion point has been the midpoint of the thigh......, determined as the midpoint between the anterior superior iliac spine and base of patella. "Adductor canal block" may be a misnomer for an approach that is actually an injection into the femoral triangle, a "femoral triangle block." This block probably has a different analgesic effect compared...... with an injection into the adductor canal. We sought to determine the exact location of the adductor canal using ultrasound and relate it to the midpoint of the thigh. METHODS: Twenty-two volunteers were examined using ultrasound. The proximal end of the adductor canal was identified where the medial border...

  11. Endodontic management of a maxillary second premolar with an S-shaped root canal

    Directory of Open Access Journals (Sweden)

    Reuben Joseph

    2008-01-01

    Full Text Available Complex and unusual root canal morphology is an often occurring phenomenon. Understanding the unusual root canal morphology contributes to success in endodontic treatment. One such variant root canal morphology is the ′S′ shaped or bayonet shaped root canal. This case report discusses endodontic treatment of a maxillary second premolar with an ′S′ shaped root canal.

  12. Geophysical investigation of a dutch levee and canal using various seismic and GPR techniques

    NARCIS (Netherlands)

    Noorlandt, R.P.; Kleine, M.P.E. de; Kruiver, P.P.; Bakker, M.A.J.; Mesdag, C.S.; Hoogendoorn, R.M.

    2011-01-01

    A geophysical survey has been carried out on the Juliana Canal and levee in the south of the Netherlands. For a stretch of about 35 km along this canal various construction works are planned, to deepen and widen the canal. The canal is in a geological setting such that leakage from the canal to the

  13. Ring canals in the ovarian follicles of Aedes aegypti

    Energy Technology Data Exchange (ETDEWEB)

    Mathew, G.; Rai, K.S.

    1976-07-01

    In the ovarian follicles of Aedes aegypti, the oocyte develops from 1 of 8 interconnected cystocytes. The cytoplasmic interconnections, the ring canals, have an electron dense rim in which are embedded an array of parallel filaments. The ring canal in presumptive follicle is generally devoid of organelles, while that in the more advanced secondary follicle encloses ribosomes, vesicles and mitochondria. Ring canals may furnish a means for the transfer of materials including ribosomes and mitochondria from nurse cells to the oocyte.

  14. Endodontic Considerations in Three-canalled Premolars: A Practical Update

    Science.gov (United States)

    Mohammadi, Zahed; Shalavi, Sousan; Giardino, Luciano; Asgary, Saeed

    2016-01-01

    The most difficult clinical considertions in orthograde root canal treatment are generally related to the anatomy of the teeth. Three-canalled maxillary and mandibular premolars (mini-molars) have been reported in several studies. The purpose of this paper was to review various aspects of three-canalled premolars including incidence, clinical and radiographic diagnosis, racial predisposition, access cavity preparation, instrumentation and obturation. PMID:27141223

  15. Three root canals in the maxillary second premolar

    Directory of Open Access Journals (Sweden)

    de Almeida-Gomes Fabio

    2009-01-01

    Full Text Available In this study, we report an endodontic treatment of the maxillary second premolar with three root canals and distinct foramens. The possibility of three root canals in this tooth is quite small; however, it must be taken into account in clinical and radiographic evaluation during endodontic treatment. Many times, their presence is noticed only after canal treatment due to continuing post-operative discomfort.

  16. CORSICA modelling of ITER hybrid operation scenarios

    Science.gov (United States)

    Kim, S. H.; Bulmer, R. H.; Campbell, D. J.; Casper, T. A.; LoDestro, L. L.; Meyer, W. H.; Pearlstein, L. D.; Snipes, J. A.

    2016-12-01

    The hybrid operating mode observed in several tokamaks is characterized by further enhancement over the high plasma confinement (H-mode) associated with reduced magneto-hydro-dynamic (MHD) instabilities linked to a stationary flat safety factor (q ) profile in the core region. The proposed ITER hybrid operation is currently aiming at operating for a long burn duration (>1000 s) with a moderate fusion power multiplication factor, Q , of at least 5. This paper presents candidate ITER hybrid operation scenarios developed using a free-boundary transport modelling code, CORSICA, taking all relevant physics and engineering constraints into account. The ITER hybrid operation scenarios have been developed by tailoring the 15 MA baseline ITER inductive H-mode scenario. Accessible operation conditions for ITER hybrid operation and achievable range of plasma parameters have been investigated considering uncertainties on the plasma confinement and transport. ITER operation capability for avoiding the poloidal field coil current, field and force limits has been examined by applying different current ramp rates, flat-top plasma currents and densities, and pre-magnetization of the poloidal field coils. Various combinations of heating and current drive (H&CD) schemes have been applied to study several physics issues, such as the plasma current density profile tailoring, enhancement of the plasma energy confinement and fusion power generation. A parameterized edge pedestal model based on EPED1 added to the CORSICA code has been applied to hybrid operation scenarios. Finally, fully self-consistent free-boundary transport simulations have been performed to provide information on the poloidal field coil voltage demands and to study the controllability with the ITER controllers. Extended from Proc. 24th Int. Conf. on Fusion Energy (San Diego, 2012) IT/P1-13.

  17. PREFACE: Progress in the ITER Physics Basis

    Science.gov (United States)

    Ikeda, K.

    2007-06-01

    I would firstly like to congratulate all who have contributed to the preparation of the `Progress in the ITER Physics Basis' (PIPB) on its publication and express my deep appreciation of the hard work and commitment of the many scientists involved. With the signing of the ITER Joint Implementing Agreement in November 2006, the ITER Members have now established the framework for construction of the project, and the ITER Organization has begun work at Cadarache. The review of recent progress in the physics basis for burning plasma experiments encompassed by the PIPB will be a valuable resource for the project and, in particular, for the current Design Review. The ITER design has been derived from a physics basis developed through experimental, modelling and theoretical work on the properties of tokamak plasmas and, in particular, on studies of burning plasma physics. The `ITER Physics Basis' (IPB), published in 1999, has been the reference for the projection methodologies for the design of ITER, but the IPB also highlighted several key issues which needed to be resolved to provide a robust basis for ITER operation. In the intervening period scientists of the ITER Participant Teams have addressed these issues intensively. The International Tokamak Physics Activity (ITPA) has provided an excellent forum for scientists involved in these studies, focusing their work on the high priority physics issues for ITER. Significant progress has been made in many of the issues identified in the IPB and this progress is discussed in depth in the PIPB. In this respect, the publication of the PIPB symbolizes the strong interest and enthusiasm of the plasma physics community for the success of the ITER project, which we all recognize as one of the great scientific challenges of the 21st century. I wish to emphasize my appreciation of the work of the ITPA Coordinating Committee members, who are listed below. Their support and encouragement for the preparation of the PIPB were

  18. A New Iterative Scheme of Modified Mann Iteration in Banach Space

    Directory of Open Access Journals (Sweden)

    Jinzuo Chen

    2014-01-01

    Full Text Available We introduce the modified iterations of Mann's type for nonexpansive mappings and asymptotically nonexpansive mappings to have the strong convergence in a uniformly convex Banach space. We study approximation of common fixed point of asymptotically nonexpansive mappings in Banach space by using a new iterative scheme. Applications to the accretive operators are also included.

  19. Picard iteration converges faster than Mann iteration for a class of quasi-contractive operators

    Directory of Open Access Journals (Sweden)

    Vasile Berinde

    2004-06-01

    Full Text Available In the class of quasi-contractive operators satisfying Zamfirescu's conditions, the most used fixed point iterative methods, that is, the Picard, Mann, and Ishikawa iterations, are all known to be convergent to the unique fixed point. In this paper, the comparison of the first two methods with respect to their convergence rate is obtained.

  20. Status of ITER neutron diagnostic development

    Science.gov (United States)

    Krasilnikov, A. V.; Sasao, M.; Kaschuck, Yu. A.; Nishitani, T.; Batistoni, P.; Zaveryaev, V. S.; Popovichev, S.; Iguchi, T.; Jarvis, O. N.; Källne, J.; Fiore, C. L.; Roquemore, A. L.; Heidbrink, W. W.; Fisher, R.; Gorini, G.; Prosvirin, D. V.; Tsutskikh, A. Yu.; Donné, A. J. H.; Costley, A. E.; Walker, C. I.

    2005-12-01

    Due to the high neutron yield and the large plasma size many ITER plasma parameters such as fusion power, power density, ion temperature, fast ion energy and their spatial distributions in the plasma core can be measured well by various neutron diagnostics. Neutron diagnostic systems under consideration and development for ITER include radial and vertical neutron cameras (RNC and VNC), internal and external neutron flux monitors (NFMs), neutron activation systems and neutron spectrometers. The two-dimensional neutron source strength and spectral measurements can be provided by the combined RNC and VNC. The NFMs need to meet the ITER requirement of time-resolved measurements of the neutron source strength and can provide the signals necessary for real-time control of the ITER fusion power. Compact and high throughput neutron spectrometers are under development. A concept for the absolute calibration of neutron diagnostic systems is proposed. The development, testing in existing experiments and the engineering integration of all neutron diagnostic systems into ITER are in progress and the main results are presented.

  1. Study of neutron spectrometers for ITER

    Energy Technology Data Exchange (ETDEWEB)

    Kaellne, Jan

    2005-11-15

    A review is presented of the developments in the field of neutron emission spectrometry (NES) which is of relevance for identifying the role of NES diagnostics on ITER and selecting suitable instrumentation. Neutron spectrometers will be part of the ITER neutron diagnostic complement and this study makes a special effort to examine which performance characteristics the spectrometers should possess to provide the best burning plasma diagnostic information together with neutron cameras and neutron yield monitors. The performance of NES diagnostics is coupled to how much interface space can be provided which has lead to an interest to find compact instruments and their NES capabilities. This study assesses all known spectrometer types of potential interest for ITER and makes a ranking of their performance (as demonstrated or projected), which, in turn, are compared with ITER measurement requirements as a reference; the ratio of diagnostic performance to interface cost for different spectrometers is also discussed for different spectrometer types. The overall result of the study is an assessment of which diagnostic functions neutron measurements can provide in burning plasma fusion experiments on ITER and the role that NES can play depending on the category of instrument installed. Of special note is the result that much higher quality diagnostic information can be obtained from neutron measurements with total yield monitors, profile flux cameras and spectrometers when the synergy in the data is considered in the analysis and interpretation.

  2. Transfert radiatif numerique pour un code SPH

    Science.gov (United States)

    Viau, Joseph Edmour Serge

    2001-03-01

    Le besoin de reproduire la formation d'etoiles par simulations numeriques s'est fait de plus en plus present au cours des 30 dernieres annees. Depuis Larson (1968), les codes de simulations n'ont eu de cesse de s'ameliorer. D'ailleurs, en 1977, Lucy introduit une autre methode de calcul venant concurrencer la methode par grille. Cette nouvelle facon de calculer utilise en effet des points a defaut d'utiliser des grilles, ce qui est une bien meilleure adaptation aux calculs d'un effondrement gravitationnel. Il restait cependant le probleme d'ajouter le transfert radiatif a un tel code. Malgre la proposition de Brookshaw (1984), qui nous montre une formule permettant d'ajouter le transfert radiatif sous la forme SPH tout en evitant la double sommation genante qu'elle implique, aucun code SPH a ce jour ne contient un transfert radiatif satisfaisant. Cette these presente pour la premiere fois un code SPH muni d'un transfert radiatif adequat. Toutes les difficultes ont pu etre surmontees afin d'obtenir finalement le transfert radiatif "vrai" qui survient dans l'effondrement d'un nuage moleculaire. Pour verifier l'integrite de nos resultats, une comparaison avec le nonisothermal test case de Boss & Myhill (1993) nous revele un resultat fort satisfaisant. En plus de suivre fidelement la courbe de l'evolution de la temperature centrale en fonction de la densite centrale, notre code est exempt de toutes les anomalies rencontrees par les codes par grille. Le test du cas de la conduction thermique nous a lui aussi servit a verifier la fiabilite de notre code. La aussi les resultats sont fort satisfaisants. Faisant suite a ces resultats, le code fut utilise dans deux situations reelles de recherche, ce qui nous a permis de demontrer les nombreuses possibilites que nous donne notre nouveau code. Dans un premier temps, nous avons tudie le comportement de la temperature dans un disque d'accretion durant son evolution. Ensuite nous avons refait en partie une experience de Bonnell

  3. Images du Mage, images pour le Mage

    Directory of Open Access Journals (Sweden)

    Daniel GREGORIO

    2007-01-01

    Full Text Available Les œuvres d’Alphonse X proposent diverses représentations du mage, qui en font, tour à tour, l’ennemi ou l’allié de la religion chrétienne. Il est vrai que parfois, comme le montre l’histoire de Simon le magicien, la pratique de la magie implique un commerce direct et néfaste avec les forces infernales. Néanmoins, les personnages de Merlin et des Rois Mages, tels qu’ils sont présentés par Alphonse X, démontrent que magie et religion peuvent cohabiter, à condition toutefois que le mage croit en la virginité de Marie et en l’Incarnation et que sa pratique magique soit bénéfique pour la communauté. Ce bénéfice requiert parfois la reconstruction de l’univers quotidien ; pour ce faire, le magicien doit savoir quand et comment utiliser des objets et des pentacles, qui lui permettront de soumettre les forces surnaturelles. Il doit donc posséder une connaissance approfondie du monde naturel et des esprits qui, conjuguée à sa foi religieuse, l’empêchera de tomber dans la démonolâtrie.Las obras alfonsíes proponen diversas aproximaciones al personaje del mago, generalmente considerado como un ser antagónico del hombre religioso. Es cierto que en algunas ocasiones, como ocurre con Simón el mago, la práctica de las artes mágicas significa un trato directo y nefasto con las fuerzas infernales. Sin embargo, personajes como Merlín o los Reyes Magos, tal y como los describe Alfonso X, subrayan una posible cohabitación entre magia y religión sin que la práctica de la una signifique la exclusión de la otra. Sólo hay que cumplir con dos condiciones : creer en la virginidad de María y que Dios se hizo hombre, y proporcionar a la comunidad un beneficio claro. Este beneficio requiere en ocasiones remodelar lo cotidiano, utilizando objetos y pentáculos, en circunstancias extremadamente determinadas, lo que implica un conocimiento exhaustivo tanto del mundo natural como del simbólico y de los espíritus. Es este

  4. Assessment of trace metal contamination in a historical freshwater canal (Buckingham Canal), Chennai, India.

    Science.gov (United States)

    Jayaprakash, M; Nagarajan, R; Velmurugan, P M; Sathiyamoorthy, J; Krishnamurthy, R R; Urban, B

    2012-12-01

    The present study was done to assess the sources and the major processes controlling the trace metal distribution in sediments of Buckingham Canal. Based on the observed geochemical variations, the sediments are grouped as South Buckingham Canal and North Buckingham Canal sediments (SBC and NBC, respectively). SBC sediments show enrichment in Fe, Ti, Mn, Cr, V, Mo, and As concentrations, while NBC sediments show enrichment in Sn, Cu, Pb, Zn, Ni, and Hg. The calculated Chemical Index of Alteration and Chemical Index of Weathering values for all the sediments are relatively higher than the North American Shale Composite and Upper Continental Crust but similar to Post-Archaean Average Shale, and suggest a source area with moderate weathering. Overall, SBC sediments are highly enriched in Mo, Zn, Cu, and Hg (geoaccumulation index (I(geo)) class 4-6), whereas NBC sediments are enriched in Sn, Cu, Zn, and Hg (I(geo) class 4-6). Cu, Ni, and Cr show higher than Effects-Range Median values and hence the biological adverse effect of these metals is 20%; Zn, which accounts for 50%, in the NBC sediments, has a more biological adverse effect than other metals found in these sediments. The calculated I(geo), Enrichment Factor, and Contamination Factor values indicate that Mo, Hg, Sn, Cu, and Zn are highly enriched in the Buckingham Canal sediments, suggesting the rapid urban and industrial development of Chennai Metropolitan City have negatively influenced on the surrounding aquatic ecosystem.

  5. Three distal root canals in mandibular first molar with different canal configurations: Report of two cases and literature review

    Directory of Open Access Journals (Sweden)

    Parul Bansal

    2015-01-01

    Full Text Available With the increasing number of reports of aberrant root canal morphology, the clinician needs to be aware of the variable anatomy. Various case reports have been published with the finding of middle mesial canal in mandibular first molar, however finding of three distal canals in distal roots of mandibular first molar is rare. This article reports endodontic management of two mandibular first molars presented with three distal canals present in a single distal root (Sert and Bayirli type XVIII and distal and distolingual root.

  6. Large small cell carcinoma of anorectal canal.

    Science.gov (United States)

    Ghahramani, Leila; Mohammadianpanah, Mohammad; Hosseini, Seyed Vahid; Hosseinzade, Masood; Izadpanah, Ahmad; Ebrahimian, Saba; Bananzadeh, Alimohammad

    2014-03-01

    Neurofibromatosis type-1 (NF1), also known as Von Recklinghausen disease, is an autosomal dominant disorder with incidence of one per 4000. Neurofibromas are benign, heterogeneous, peripheral nerve sheath tumors coming up from the connective tissue of peripheral nerve sheaths, particularly the endoneurium. Visceral involvement in disseminated neurofibromatosis is considered rare. Neurofibroma occurs most frequently in the stomach and jejunum, but colon and anorectal canal may also be involved. Gastrointestinal neurofibromas may lead to bleeding, obstruction, intussusception, protein-losing enteropathy and bowel perforation. We encountered a case of diffusely involving the anorectal area by huge neurofibroma, which resulted in pelvic pain with watery diarrhea and urgency.

  7. Suez Canal Clearance Operation, Task Force 65

    Science.gov (United States)

    1975-05-01

    and remove the four wrecks from the central region of the canal; DREDGE 23, Tug MONGUED, Dredge KASSER and a Concrete Caisson. All salvage operations...feet BUCKET DREDGE NO. 23 72.00 1600 tons 191 feet TUG MONGUED 81.50 1200 tons 165 feet DIPPER DREDGE KASSER 81.50 1200 tons 125 feet CONCRETE CAISSON...MONGUED, DREDGE KASSER , and DREDGE 23 to wet dump in the Great Bitter Lake. Heavy crane THOR arrived in Port Said after transit from Hamburg, Germany

  8. CANALES (2) [Material gráfico

    OpenAIRE

    Fundación para la Etnografía y el Desarrollo de la Artesanía Canaria

    1990-01-01

    ALGUNAS PIEDRAS CAIDAS. SEDIMENTACION. Antiguedad: SIGLO XX CONSTRUCCION DE ARENA, CAL Y PIEDRAS REDONDEADAS. CON RIPIOS POR TODAS PARTES. EN SECTORES HAY PAREDES DE HASTA 4 MTS. DE ALTO PARA SALVAR EL DESNIVEL. UN METRO DE ANCHO DEL CANAL Y 0`5 MTS. LA COBERTURA DEL MISMO. Calificación del suelo: RÚSTICO DE PROTECCIÓN NATURAL Clasificación del suelo: RÚSTICO Declaración BIC:No LA OTRA ACEQUIA QUE CIRCULA POR LA PARTE SUPERIOR ESTA MAS DETERIORADA. VAN A 10 MTS. DE SEPARACIO...

  9. CAVERNOUS HEMANGIOMA OF THE INTERNAL AUDITORY CANAL

    Directory of Open Access Journals (Sweden)

    Mohammad Hossein Hekmatara

    1993-06-01

    Full Text Available Cavernous hemangioma is a rare benign tumor of the internal auditory canal (IAC of which fourteen cases have been reported so far."nTinnitus and progressive sensorineural hearing loss (SNHL are the chief complaints of the patients. Audiological and radiological planes, CTScan, and magnetic resonance image (MRI studies are helpful in diagnosis. The only choice of treatment is surgery with elective transmastoid trans¬labyrinthine approach. And if tumor is very large, the method of choice will be retrosigmoid approach.

  10. Cancer incidence in the Love Canal area.

    Science.gov (United States)

    Janerich, D T; Burnett, W S; Feck, G; Hoff, M; Nasca, P; Polednak, A P; Greenwald, P; Vianna, N

    1981-06-19

    Data from the New York Cancer Registry show no evidence for higher cancer rates associated with residence near the Love Canal toxic waste burial site in comparison with the entire state outside of New York City. Rates of liver cancer, lymphoma, and leukemia, which were selected for special attention, were not consistently elevated. Among the other cancers studied, a higher rate was noted only for respiratory cancer, but it was not consistent across age groups and appeared to be related to a high rate for the entire city of Niagara Falls. There was no evidence that the lung cancer rate was associated with the toxic wastes buried at the dump site.

  11. Revestimientos especiales para diques y canales

    Directory of Open Access Journals (Sweden)

    Zorzi, Silvano

    1964-11-01

    Full Text Available This paper summarizes the possibilities and advantages of adopting special facings for dykes and canals, and generally for all large hydraulic works, where waterproofing is of paramount importance. Technical advances in recent years have made it possible to prefabricate many facing units used in these types of works; large slabs, made in reinforced and prestressed concrete, are flexible, and watertight. Although there are many possibilities and types of facing treatments, the one described here is outstanding. It consists of narrow slabs, highly flexible, placed transversally with respect to the canal axis. They are attached with cement mortar, and the joints are finally sealed with a special mortar, called «Emboco». In this article a description is also given of a series of projects, where facing treatments have been used, which are now successfully in service. Finally some general and simple advise is given on the best procedure to apply these facing treatments in the most effective and economic manner.En este trabajo se resumen las posibilidades y ventajas que ofrecen los revestimientos especiales de diques y taludes de canales y, en general, en todas las grandes obras hidráulicas, en que la impermeabilización es de mayor importancia al tratar de conservar los caudales iniciales o la retención de aguas embalsadas, según los casos. Los progresos de las técnicas modernas, en particular la prefabricación, han permitido este tipo de revestimientos con losas de gran longitud, extremadamente flexibles e impermeables, de hormigón armado y pretensado. Aunque son muchas las posibilidades y tipos de revestimiento, destaca el que a continuación se expone: consiste en placas o losas estrechas, de gran flexibilidad, colocadas transversalmente al eje del canal sobre tongadas de mortero de cemento, y cuyas juntas se sellan, finalmente, con un mortero especial llamado «Emboco». Complementan la exposición teórica del método una serie de

  12. Water Environment Evolution along the China Grand Canal

    Science.gov (United States)

    Mao, F.; Wu, Y. X.; Yang, B. F.; Li, X. J.

    2014-03-01

    The China Grand Canal is one of the earliest canals in the world, having lasted for nearly 3000 years. Even its section canals have a rich history, such as the North-South Grand Canal that was established during the Sui Dynasty, whereas the Beijing-Hangzhou Canal was excavated during the Yuan Dynasty and the east line of the South-to-North Water Diversion. As one of the longest in the world, the China Grand Canal's total length is over 3500 kilometers. This length includes the navigable, unnavigable, and underground sections. Making the best use of situations and according to local conditions, the Chinese people harmoniously constructed the Beijing-Hangzhou Canal with nature. Tens of millions of workers took nearly 3000 years to complete the great shipping system. Navigable sections still exist for up to 900 kilometers and the volume of freight traffic is approximately 300 million tons. The canal remains the main logistical channel of the North-to-South Coal Transportation, South-to-North Water Diversion, and resources circulation. To date, China is promoting the success of heritage application. Part of these efforts is the declaration of the China Grand Canal as a World Cultural Heritage by 2014. In addition, the east route of the South-to-North Water Transfer project is planned to be navigable by 2016. The ancient Beijing-Hangzhou Grand Canal will usher in the new ecological civilization and cultural revival along the canal. This paper presents technical methods of water environment evolution research on the river system, river, and water quality along the Beijing-Hangzhou Canal through the integration of historical literature and modern remote sensing image data. The study carried out water environment investigation and analysis along the Beijing-Hangzhou canal by using ETM, SPOT image data, and GPS measurement data. Spatial and temporal evolution characteristics and regulations of the Beijing-Hangzhou Grand Canal regional water environment in the span of 3000

  13. Root canal treatment of mandibular second premolar tooth with taurodontism

    Directory of Open Access Journals (Sweden)

    Vujašković Mirjana

    2008-01-01

    Full Text Available INTRODUCTION Taurodontism is a morphoanatomical change in the shape of a tooth. An enlarged body of a tooth with smaller than usual roots is a characteristic feature. Internal tooth anatomy correlates with this appearance, which means that a taurodontal tooth has a large pulp chamber and apically positioned furcations. This dental anomaly may be associated with different syndromes and congenital discoders. CASE OUTLINE The case report presents the patient of a rare case of taurodontism in the mandibular second premolar with chronic periodontitis. Endodontic treatment was performed after dental history and clinical examination. Special care is required in all segments of endodontic treatment of a taurodontal tooth from the identification orifice, canal exploration, determining working length, cleaning and shaping and obturation of the root canal. Precurved K-file was used for canal exploration and location of the furcation. One mesial and one distal canal with the buccal position were identified in the apical third of the root canal. The working lengths of two canals were determined by radiographic interpretation with two K-files in each canal and verified with the apex locator. During canal instrumentation, the third canal was located in the disto-lingual position. The working length of the third canal was established using the apex locator. CONCLUSION Thorough knowledge of tooth anatomy and its variations can lead to lower percentage of endodontic failure. Each clinical case involving these teeth should be investigated carefully, clinically and radiographically to detect additional root canals. High quality radiographs from different angles and proper instrumentarium improve the quality of endodontic procedure.

  14. Burning plasmas in ITER for energy source

    Energy Technology Data Exchange (ETDEWEB)

    Inoue, Nobuyuki [Atomic Energy Commission, Tokyo (Japan)

    2002-10-01

    Fusion research and development has two aspects. One is an academic research on science and technology, i.e., discovery and understanding of unexpected phenomena and, development of innovative technology, respectively. The other is energy source development to realize fusion as a viable energy future. Fusion research has been made remarkable progress in the past several decades, and ITER will soon realize burning plasma that is essential for both academic research and energy development. With ITER, scientific research on unknown phenomena such as self-organization of the plasma in burning state will become possible and it contributes to create a variety of academic outcome. Fusion researchers will have a responsibility to generate actual energy, and electricity generation immediately after the success of burning plasma control experiment in ITER is the next important step that has to be discussed seriously. (author)

  15. The ITER in-vessel system

    Energy Technology Data Exchange (ETDEWEB)

    Lousteau, D.C.

    1994-09-01

    The overall programmatic objective, as defined in the ITER Engineering Design Activities (EDA) Agreement, is to demonstrate the scientific and technological feasibility of fusion energy for peaceful purposes. The ITER EDA Phase, due to last until July 1998, will encompass the design of the device and its auxiliary systems and facilities, including the preparation of engineering drawings. The EDA also incorporates validating research and development (R&D) work, including the development and testing of key components. The purpose of this paper is to review the status of the design, as it has been developed so far, emphasizing the design and integration of those components contained within the vacuum vessel of the ITER device. The components included in the in-vessel systems are divertor and first wall; blanket and shield; plasma heating, fueling, and vacuum pumping equipment; and remote handling equipment.

  16. Re-starting an Arnoldi iteration

    Energy Technology Data Exchange (ETDEWEB)

    Lehoucq, R.B. [Argonne National Lab., IL (United States)

    1996-12-31

    The Arnoldi iteration is an efficient procedure for approximating a subset of the eigensystem of a large sparse n x n matrix A. The iteration produces a partial orthogonal reduction of A into an upper Hessenberg matrix H{sub m} of order m. The eigenvalues of this small matrix H{sub m} are used to approximate a subset of the eigenvalues of the large matrix A. The eigenvalues of H{sub m} improve as estimates to those of A as m increases. Unfortunately, so does the cost and storage of the reduction. The idea of re-starting the Arnoldi iteration is motivated by the prohibitive cost associated with building a large factorization.

  17. Cyclic game dynamics driven by iterated reasoning

    CERN Document Server

    Frey, Seth

    2012-01-01

    Recent theories from complexity science argue that complex dynamics are ubiquitous in social and economic systems. These claims emerge from the analysis of individually simple agents whose collective behavior is surprisingly complicated. However, game theorists have argued that iterated reasoning-our ability to think through what you think I think you think-will prevent complex dynamics and facilitate convergence to classic equilibria. We report stable and efficient periodic behavior in human groups playing the Mod Game, a multi-player game similar to Rock-Paper-Scissors. The game rewards subjects for thinking exactly one step ahead of others in their group. Groups that play this game exhibit cycles that are inconsistent with any fixed-point equilibrium concept. These cycles are driven by a "hopping" behavior that can only be explained by iterated reasoning. If iterated reasoning can be complicit in complex dynamics, then game cycles and chaos may realistically be driving fluctuations in real-world social and...

  18. SPARSE ELECTROMAGNETIC IMAGING USING NONLINEAR LANDWEBER ITERATIONS

    KAUST Repository

    Desmal, Abdulla

    2015-07-29

    A scheme for efficiently solving the nonlinear electromagnetic inverse scattering problem on sparse investigation domains is described. The proposed scheme reconstructs the (complex) dielectric permittivity of an investigation domain from fields measured away from the domain itself. Least-squares data misfit between the computed scattered fields, which are expressed as a nonlinear function of the permittivity, and the measured fields is constrained by the L0/L1-norm of the solution. The resulting minimization problem is solved using nonlinear Landweber iterations, where at each iteration a thresholding function is applied to enforce the sparseness-promoting L0/L1-norm constraint. The thresholded nonlinear Landweber iterations are applied to several two-dimensional problems, where the ``measured\\'\\' fields are synthetically generated or obtained from actual experiments. These numerical experiments demonstrate the accuracy, efficiency, and applicability of the proposed scheme in reconstructing sparse profiles with high permittivity values.

  19. A Logical Characterization of Iterated Admissibility

    CERN Document Server

    Halpern, Joseph Y

    2009-01-01

    Brandenburger, Friedenberg, and Keisler provide an epistemic characterization of iterated admissibility (i.e., iterated deletion of weakly dominated strategies) where uncertainty is represented using LPSs (lexicographic probability sequences). Their characterization holds in a rich structure called a complete structure, where all types are possible. Here, a logical charaacterization of iterated admisibility is given that involves only standard probability and holds in all structures, not just complete structures. A stronger notion of strong admissibility is then defined. Roughly speaking, strong admissibility is meant to capture the intuition that "all the agent knows" is that the other agents satisfy the appropriate rationality assumptions. Strong admissibility makes it possible to relate admissibility, canonical structures (as typically considered in completeness proofs in modal logic), complete structures, and the notion of ``all I know''.

  20. Iterative Reconstruction of Coded Source Neutron Radiographs

    Energy Technology Data Exchange (ETDEWEB)

    Santos-Villalobos, Hector J [ORNL; Bingham, Philip R [ORNL; Gregor, Jens [University of Tennessee, Knoxville (UTK)

    2013-01-01

    Use of a coded source facilitates high-resolution neutron imaging through magnifications but requires that the radiographic data be deconvolved. A comparison of direct deconvolution with two different iterative algorithms has been performed. One iterative algorithm is based on a maximum likelihood estimation (MLE)-like framework and the second is based on a geometric model of the neutron beam within a least squares formulation of the inverse imaging problem. Simulated data for both uniform and Gaussian shaped source distributions was used for testing to understand the impact of non-uniformities present in neutron beam distributions on the reconstructed images. Results indicate that the model based reconstruction method will match resolution and improve on contrast over convolution methods in the presence of non-uniform sources. Additionally, the model based iterative algorithm provides direct calculation of quantitative transmission values while the convolution based methods must be normalized base on known values.

  1. Advances in iterative methods for nonlinear equations

    CERN Document Server

    Busquier, Sonia

    2016-01-01

    This book focuses on the approximation of nonlinear equations using iterative methods. Nine contributions are presented on the construction and analysis of these methods, the coverage encompassing convergence, efficiency, robustness, dynamics, and applications. Many problems are stated in the form of nonlinear equations, using mathematical modeling. In particular, a wide range of problems in Applied Mathematics and in Engineering can be solved by finding the solutions to these equations. The book reveals the importance of studying convergence aspects in iterative methods and shows that selection of the most efficient and robust iterative method for a given problem is crucial to guaranteeing a good approximation. A number of sample criteria for selecting the optimal method are presented, including those regarding the order of convergence, the computational cost, and the stability, including the dynamics. This book will appeal to researchers whose field of interest is related to nonlinear problems and equations...

  2. Un ticket pour la liberté

    Directory of Open Access Journals (Sweden)

    Nabil Mouline

    2014-07-01

    Full Text Available Pour diverses raisons, l’industrie cinématographique égyptienne a connu des changements profonds au début des années 2000. L’une des conséquences les plus palpables a été la production de manière volontaire ou involontaire de films contestataires dans la mesure où ils essaient de remettre en cause le discours dominant et de lever le tabou sur plusieurs questions sociopolitiques. Cela a fait du produit filmique non seulement un document d’archive qui reflète l’état de la société mais également un outil efficace de soft influence et de mobilisation qui a participé à la création d’une communauté imaginée dont une partie est passée à l’action le 25 janvier 2011. C’est l’ambition de cet article que de lever le voile sur ce double rôle du cinéma entre 2001 et 2010 en s’appuyant sur un large échantillon de films à grand succès.

  3. ALGORITHME POUR LE CALCUL DES COURBURES GENERALISEES

    Directory of Open Access Journals (Sweden)

    K MEZAGHCHA

    2004-06-01

    Full Text Available On sait qu’une courbe algébrique standard  d'équation f(x, y =0 admet un nombre fini de branches (nombre inférieur à l'ordre de f , dont les paramètrages peuvent être obtenus en particulier à partir de la décomposition de Goze itérée. On aimerait calculer  leur courbure généralisée sans les déterminer explicitement, la notion de courbure généralisée ayant fait l’objet d’un travail, publié dans les comptes rendus de l’Université de Cagliari (Italie [12]. Dans cet article, on se propose d'établir à cet effet un algorithme qui donnera à partir seulement des coefficients de f, la liste exhaustive des courbures généralisées de toutes les branches réelles. L’article se termine par la donnée d’un exemple pour montrer l’efficacité de l’algorithme proposé.

  4. Fusion neutron diagnostics on ITER tokamak

    Science.gov (United States)

    Bertalot, L.; Barnsley, R.; Direz, M. F.; Drevon, J. M.; Encheva, A.; Jakhar, S.; Kashchuk, Y.; Patel, K. M.; Arumugam, A. P.; Udintsev, V.; Walker, C.; Walsh, M.

    2012-04-01

    ITER is an experimental nuclear reactor, aiming to demonstrate the feasibility of nuclear fusion realization in order to use it as a new source of energy. ITER is a plasma device (tokamak type) which will be equipped with a set of plasma diagnostic tools to satisfy three key requirements: machine protection, plasma control and physics studies by measuring about 100 different parameters. ITER diagnostic equipment is integrated in several ports at upper, equatorial and divertor levels as well internally in many vacuum vessel locations. The Diagnostic Systems will be procured from ITER Members (Japan, Russia, India, United States, Japan, Korea and European Union) mainly with the supporting structures in the ports. The various diagnostics will be challenged by high nuclear radiation and electromagnetic fields as well by severe environmental conditions (ultra high vacuum, high thermal loads). Several neutron systems with different sensitivities are foreseen to measure ITER expected neutron emission from 1014 up to almost 1021 n/s. The measurement of total neutron emissivity is performed by means of Neutron Flux Monitors (NFM) installed in diagnostic ports and by Divertor Neutron Flux Monitors (DNFM) plus MicroFission Chambers (MFC) located inside the vacuum vessel. The neutron emission profile is measured with radial and vertical neutron cameras. Spectroscopy is accomplished with spectrometers looking particularly at 2.5 and 14 MeV neutron energy. Neutron Activation System (NAS), with irradiation ends inside the vacuum vessel, provide neutron yield data. A calibration strategy of the neutron diagnostics has been developed foreseeing in situ and cross calibration campaigns. An overview of ITER neutron diagnostic systems and of the associated challenging engineering and integration issues will be reported.

  5. Benign Paroxysmal Positional Vertigo with Simultaneous Involvement of Multiple Semicircular Canals

    OpenAIRE

    Shim, Dae Bo; Song, Chang Eun; Jung, Eun Jung; Ko, Kyung Min; Park, Jin Woo; Song, Mee Hyun

    2014-01-01

    Background and Objectives Benign paroxysmal positional vertigo (BPPV) generally involves a single semicircular canal (single canal BPPV) but it has been reported that more than one semicircular canal on either the same or the opposite side can be involved in 6.8-20% of the cases (multiple canal BPPV). In this study, the clinical characteristics of multiple canal BPPV were analyzed and compared to those of single canal BPPV. Materials and Methods Retrospective analysis was performed on 1054 co...

  6. Canal switch after canalith repositioning procedure for benign paroxysmal positional vertigo.

    Science.gov (United States)

    Lin, Giant C; Basura, Gregory J; Wong, Hiu Tung; Heidenreich, Katherine D

    2012-09-01

    Canal switch is a complication following canalith repositioning procedure (CRP) for posterior canal benign paroxysmal positional vertigo (BPPV). Instead of being returned to the utricle, the loose otoconia migrate into the superior or horizontal semicircular canal. Patients remain symptomatic, and treatment can be ineffective unless the switch is recognized and additional repositioning maneuvers directed toward the appropriate semicircular canal are performed. This report provides the first videographic documentation of canal switch involving conversion of unilateral posterior semicircular canal BPPV to geotropic horizontal canalithiasis.

  7. Iterated learning and the evolution of language.

    Science.gov (United States)

    Kirby, Simon; Griffiths, Tom; Smith, Kenny

    2014-10-01

    Iterated learning describes the process whereby an individual learns their behaviour by exposure to another individual's behaviour, who themselves learnt it in the same way. It can be seen as a key mechanism of cultural evolution. We review various methods for understanding how behaviour is shaped by the iterated learning process: computational agent-based simulations; mathematical modelling; and laboratory experiments in humans and non-human animals. We show how this framework has been used to explain the origins of structure in language, and argue that cultural evolution must be considered alongside biological evolution in explanations of language origins.

  8. Beyond ITER: Neutral beams for DEMO

    CERN Document Server

    McAdams, R

    2013-01-01

    In the development of magnetically confined fusion as an economically sustainable power source, ITER is currently under construction. Beyond ITER is the DEMO programme in which the physics and engineering aspects of a future fusion power plant will be demonstrated. DEMO will produce net electrical power. The DEMO programme will be outlined and the role of neutral beams for heating and current drive will be described. In particular, the importance of the efficiency of neutral beam systems in terms of injected neutral beam power compared to wallplug power will be discussed. Options for improving this efficiency including advanced neutralisers and energy recovery are discussed.

  9. Iterative quantum algorithm for distributed clock synchronization

    Institute of Scientific and Technical Information of China (English)

    Wang Hong-Fu; Zhang Shou

    2012-01-01

    Clock synchronization is a well-studied problem with many practical and scientific applications.We propose an arbitrary accuracy iterative quantum algorithm for distributed clock synchronization using only three qubits.The n bits of the time difference △ between two spatially separated clocks can be deterministically extracted by communicating only O(n) messages and executing the quantum iteration process n times based on the classical feedback and measurement operations.Finally,we also give the algorithm using only two qubits and discuss the success probability of the algorithm.

  10. Efficient iterative technique for designing bragg gratings

    DEFF Research Database (Denmark)

    Plougmann, Nikolai; Kristensen, Martin

    2004-01-01

    We present a new iterative method for designing Bragg gratings based on the Levenberg-Marquardt method of minimizing a chi-squared merit function. It is effective for designing both weak and strong gratings and is particularly well suited for unchirped gratings.......We present a new iterative method for designing Bragg gratings based on the Levenberg-Marquardt method of minimizing a chi-squared merit function. It is effective for designing both weak and strong gratings and is particularly well suited for unchirped gratings....

  11. Iterative Contracts as Proactive Law Instruments

    DEFF Research Database (Denmark)

    Henschel, René Franz

    2012-01-01

    and incremental software development. In contrast to traditional IT project methodologies, where the product development takes place in a sequential design process, the iterative process is characterized by the so_ ware being developed through a series of repeated cycles in smaller portions at a time....... This software development process has driven the need for a new contract design that supports the product life cycle better than the traditional contracts. As will be shown in the analysis, the iterative contracts represent important legal innovation and can be categorized as a proactive law instrument that has...

  12. Rational Verification in Iterated Electric Boolean Games

    Directory of Open Access Journals (Sweden)

    Youssouf Oualhadj

    2016-07-01

    Full Text Available Electric boolean games are compact representations of games where the players have qualitative objectives described by LTL formulae and have limited resources. We study the complexity of several decision problems related to the analysis of rationality in electric boolean games with LTL objectives. In particular, we report that the problem of deciding whether a profile is a Nash equilibrium in an iterated electric boolean game is no harder than in iterated boolean games without resource bounds. We show that it is a PSPACE-complete problem. As a corollary, we obtain that both rational elimination and rational construction of Nash equilibria by a supervising authority are PSPACE-complete problems.

  13. Iterative solution of large linear systems

    CERN Document Server

    Young, David M

    2003-01-01

    This self-contained treatment offers a systematic development of the theory of iterative methods. Its focal point resides in an analysis of the convergence properties of the successive overrelaxation (SOR) method, as applied to a linear system with a consistently ordered matrix. The text explores the convergence properties of the SOR method and related techniques in terms of the spectral radii of the associated matrices as well as in terms of certain matrix norms. Contents include a review of matrix theory and general properties of iterative methods; SOR method and stationary modified SOR meth

  14. Fatigue tests on the ITER PF jacket

    Science.gov (United States)

    Qin, Jinggang; Weiss, Klaus-Peter; Wu, Yu; Wu, Zhixiong; Li, Laifeng; Liu, Sheng

    2012-10-01

    This paper focuses on fatigue tests on the ITER Poloidal Field (PF) jacket made of 316L stainless steel material. During manufacture, the conductor will be compacted and spooled after cable insertion. Therefore, sample jackets were prepared under compaction, bending and straightening in order to simulate the status of PF conductor during manufacturing and winding. The fatigue properties of materials were measured at T fatigue crack growth rate (FCGR). The testing results show that the present Chinese PF jacket has good fatigue properties, which conclude that the results are accordant with the requirements of ITER.

  15. Visibility of the central canal on MRI

    Energy Technology Data Exchange (ETDEWEB)

    Petit-Lacour, M.C.; Lasjaunias, P.; Iffenecker, C.; Benoudiba, F.; Hadj Rabia, M.; Doyon, D. [Service de Neuroradiologie, Faculte de Paris Sud (France); Hurth, M. [Department of Neurosurgery, Faculte Paris Sud, Kremlin-Bicetre (France)

    2000-10-01

    The central canal of the spinal cord is present at birth and becomes progressively obliterated. Cadaver studies have shown that it may persiste partially or completely. To our knowledge, this entity has not been described on MRI. We reviewed 794 MRI studies of the spinal cord, and found 12 patients (aged 14 to 65 years) who had an intramedullary cavity. The cavity was at the junction of the ventral {sup 1}/{sub 3} and dorsal {sup 2}/{sub 3} of the spinal cord, except at the level of the lumbar enlargement, where it was central. It was filiform in most cases, although sometimes fusiform (3 to 4 mm in diameter), and had regular contours. The cavity were thoracic in 69 % of cases. The clinical features were totally unrelated to the image, and there were no anatomical factors (Chiari malformation, dysraphism) predisposing to syringomyelia. The images were perfectly compatible with a persistent central canal, which we interpret as a variant of normal anatomy. Therefore it is important to regard these findings as normal, to avoid unnecessary treatment and follow-up. (orig.)

  16. Root canals-from concretion to patency

    Directory of Open Access Journals (Sweden)

    Chandrakar Chaman

    2015-01-01

    Full Text Available Teeth with calcification provide an endodontic treatment challenge; traumatized teeth usually develop partial or total pulpal obliteration which is characterized by apparent loss of the pulp space radiographically and a yellow discoloration of the clinical crown. Since only 7-27% of such teeth develop pulp necrosis with radiographic signs of apical periodontitis, it is difficult to decide whether to treat these teeth immediately upon detection of the pulpal obliteration or to wait until signs and symptoms of pulp and/or apical periodontitis occur. This article reviews the etiology, prevalence, classification, mechanism, diagnosis as well as treatment options for teeth with pulp obliteration and the various management approaches and treatment strategies for overcoming potential complications. A search of articles from "PubMed" and "Medline" from 1965 to present was done with the keywords dental trauma, discoloration, pathfinding instruments, pulp canal obliteration, and root canal treatment was conducted. A total of 94 abstracts were collected, of which 70 relevant articles were read and 31 most relevant articles were included in this article.

  17. Assessment of three root canal preparation techniques on root canal geometry using micro-computed tomography: In vitro study

    Directory of Open Access Journals (Sweden)

    Shaikha M Al-Ali

    2012-01-01

    Full Text Available Aim: To assess the effects of three root canal preparation techniques on canal volume and surface area using three-dimensionally reconstructed root canals in extracted human maxillary molars. Materials and Methods: Thirty extracted Human Maxillary Molars having three separate roots and similar root shape were randomly selected from a pool of extracted teeth for this study and stored in normal saline solution until used. A computed tomography scanner (Philips Brilliance CT 64-slice was used to analyze root canals in extracted maxillary molars. Specimens were scanned before and after canals were prepared using stainless steel K-Files, Ni-Ti rotary ProTaper and rotary SafeSiders instruments. Differences in dentin volume removed, the surface area, the proportion of unchanged area and canal transportation were calculated using specially developed software. Results: Instrumentation of canals increased volume and surface area. Statistical analysis found a statistically significant difference among the 3 groups in total change in volume (P = 0.001 and total change in surface area (P = 0.13. Significant differences were found when testing both groups with group III (SafeSiders. Significant differences in change of volume were noted when grouping was made with respect to canal type (in MB and DB (P < 0.05. Conclusion: The current study used computed tomography, an innovative and non destructive technique, to illustrate changes in canal geometry. Overall, there were few statistically significant differences between the three instrumentation techniques used. SafeSiders stainless steel 40/0.02 instruments exhibit a greater cutting efficiency on dentin than K-Files and ProTaper. CT is a new and valuable tool to study root canal geometry and changes after preparation in great details. Further studies with 3D-techniques are required to fully understand the biomechanical aspects of root canal preparation.

  18. The Effect of Canal Contamination with Saliva on Apical Sealing

    Directory of Open Access Journals (Sweden)

    S Sabaghi

    2014-08-01

    Full Text Available Introduction: Root canal obturation aims at sealing the root canal system to prevent re-contamination of canal and periapical space. Presence of moisture in canal before obturation may posit a negative effect on the quality of canal sealing. Therefore, this study was conducted to investigate the effect of canal contamination with saliva on apical microleakage. Methods: In this laboratory study, 58 human uni-root teeth were cleaned and shaped for obturation with gutta percha and sealer AH26. In the case group, specimens were contaminated with human saliva immediately before obturation, whereas the teeth in the control group were kept dry. All canals were filled by lateral condensation technique. Moreover, the teeth were placed in methylene blue dye for 3 days. Dye penetration was measured using a stereomicrosope. As a matter of fact, the study data were analyzed via utilizing t-test. Results: A significant difference was found between the two groups in regard with the apical leakage(P<0.001. The microleakage mean of dye in the dry group was 3/48mm, whereas it was 6/36mm in the saliva contaminated group. Conclusion: The study findings revealed that complete drying of canal can improve apical sealing.

  19. Evaluation of torque within manual preparation with root canal instruments

    OpenAIRE

    Gorski, Christof

    2016-01-01

    Used root canal instruments are often deformed; they can fracture, persist and reinfect teeth. There are no evident studies consulting torque and manual preparation of root canals. Thus, the purpose of this study is the evaluation of torque within manual preparation in connection with its impact on file deformation. With the aid of torque measurement a change in dental education could potentially be achieved.

  20. 33 CFR 117.769 - Black Rock Canal.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Black Rock Canal. 117.769 Section 117.769 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements New York § 117.769 Black Rock Canal. The draws of...

  1. 33 CFR 117.159 - Grant Line Canal.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Grant Line Canal. 117.159 Section 117.159 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements California § 117.159 Grant Line Canal. The draw of the San Joaquin County highway bridge, mile 5.5...

  2. 33 CFR 117.181 - Oakland Inner Harbor Tidal Canal.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Oakland Inner Harbor Tidal Canal. 117.181 Section 117.181 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements California § 117.181 Oakland Inner Harbor Tidal Canal. The draws of the...

  3. 33 CFR 117.494 - Schooner Bayou Canal.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Schooner Bayou Canal. 117.494 Section 117.494 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Louisiana § 117.494 Schooner Bayou Canal. The draw of the S82 bridge, mile 4.0 from White Lake...

  4. 33 CFR 117.849 - Muskingum River (Zanesville Canal).

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Muskingum River (Zanesville Canal). 117.849 Section 117.849 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Ohio § 117.849 Muskingum River (Zanesville Canal). The draw of the Conrail...

  5. 33 CFR 117.1051 - Lake Washington Ship Canal.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Lake Washington Ship Canal. 117.1051 Section 117.1051 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Washington § 117.1051 Lake Washington Ship Canal. (a) When fog prevails by day or...

  6. 33 CFR 117.586 - Annisquam River and Blynman Canal.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Annisquam River and Blynman Canal. 117.586 Section 117.586 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Massachusetts § 117.586 Annisquam River and Blynman Canal. The draw of the Blynman...

  7. 33 CFR 117.235 - Chesapeake and Delaware Canal.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Chesapeake and Delaware Canal. 117.235 Section 117.235 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Delaware § 117.235 Chesapeake and Delaware Canal. The draw of the Conrail bridge, mile...

  8. 33 CFR 117.589 - Cape Cod Canal.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Cape Cod Canal. 117.589 Section 117.589 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Massachusetts § 117.589 Cape Cod Canal. The draw of the Conrail railroad bridge, mile 0.7 at...

  9. 33 CFR 117.495 - Superior Oil Canal.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Superior Oil Canal. 117.495 Section 117.495 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Louisiana § 117.495 Superior Oil Canal. The draw of the S82 bridge, mile 6.3, in Cameron...

  10. 5 CFR 550.714 - Panama Canal Commission employees.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Panama Canal Commission employees. 550.714 Section 550.714 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PAY ADMINISTRATION (GENERAL) Severance Pay § 550.714 Panama Canal Commission employees. (a) Notwithstanding any other provisions of this subpart,...

  11. 33 CFR 117.239 - Lewes and Rehoboth Canal.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Lewes and Rehoboth Canal. 117.239 Section 117.239 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Delaware § 117.239 Lewes and Rehoboth Canal. (a) The draw of the Savannah Road/SR 18...

  12. 33 CFR 117.273 - Canaveral Barge Canal.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Canaveral Barge Canal. 117.273 Section 117.273 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Florida § 117.273 Canaveral Barge Canal. (a) The drawspan of the Christa McAuliffe...

  13. Optimizing the chemical aspect of root canal irrigation

    NARCIS (Netherlands)

    R.G. de Macedo

    2013-01-01

    Root canal treatment is aimed at the removal of inflamed and infected tissue present in the root canal system. It will prevent the entrance of new microorganisms or nutrients in order to maintain or create a healthy environment around the root. There is sufficient evidence that shows that traditiona

  14. Reform in Indian canal irrigation: does technology matter?

    NARCIS (Netherlands)

    Narain, V.

    2008-01-01

    This paper examines the implications of technology - the design of canal irrigation for irrigation management reform. With reference to two different design systems in Indian irrigation - shejpali and warabandi - it shows that the potential for reform varies with the design of canal irrigation. Thre

  15. 33 CFR 117.653 - St. Mary's Falls Canal.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false St. Mary's Falls Canal. 117.653 Section 117.653 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Michigan § 117.653 St. Mary's Falls Canal. The draw...

  16. Incidence of dentinal defects after root canal filling procedures

    NARCIS (Netherlands)

    Shemesh, H.; Wesselink, P.R.; Wu, M.K.

    2010-01-01

    Aim  To compare the incidence of dentinal defects (cracks and craze lines) after root canal preparation, lateral compaction and continuous wave compaction of gutta-percha and AH26 sealer. Methodology  Two hundred mandibular premolar teeth were divided into four groups with similar average canal diam

  17. The Influence of Canalization on the Robustness of Boolean Networks

    CERN Document Server

    Kadelka, Claus; Laubenbacher, Reinhard

    2016-01-01

    Time- and state-discrete dynamical systems are frequently used to model molecular networks. This paper provides a collection of mathematical and computational tools for the study of robustness in Boolean network models. The focus is on networks governed by $k$-canalizing functions, a recently introduced class of Boolean functions that contains the well-studied class of nested canalizing functions. The activities and sensitivity of a function quantify the impact of input changes on the function output. This paper generalizes the latter concept to $c$-sensitivity and provides formulas for the activities and $c$-sensitivity of general $k$-canalizing functions as well as canalizing functions with more precisely defined structure. A popular measure for the robustness of a network, the Derrida value, can be expressed as a weighted sum of the $c$-sensitivities of the governing canalizing functions, and can also be calculated for a stochastic extension of Boolean networks. These findings provide a computationally eff...

  18. Direct solutions for normal depths in curved irrigation canals

    CERN Document Server

    Zhang, X Y

    2013-01-01

    The normal depth is an important hydraulic element for canal design, operation and management. Curved irrigation canals including parabola, U-shaped and catenary canals have excellent hydraulic performance and strong ability of anti-frost heave, while the normal depths in the governing equations of the current common methods have no explicit analytical solution. They are only indirect methods by using trial procedures, numerical methods, and graphical tools. This study presents new direct formulas for normal depth in curved irrigation canals by applying for Marquardt method. The maximum relative error of the proposed formulas is less than 1% within the practice range by comparative analysis, and they are simple and convenient for manual calculations. The results may provide the reliable theoretical basis and useful reference for the design and operation management of irrigation canals.

  19. VARIATION OF MAXILLARY FIRST PREMOLAR WITH THREE ROOT CANALS

    Directory of Open Access Journals (Sweden)

    Janet Kirilova

    2014-09-01

    Full Text Available Background: Successful endodontic treatment requires effective biomechanical preparation of the root canals and three-dimensional obturation of the root canal system. This can be achieved only by knowing and identifying the variations in the root canal system of the endodontically treated teeth. The Aim: The aim of this article is to present cases of endodontic treatment of maxillary first premolar with three root canals – different types. Material and Methods: Five clinical cases of successful endodontic treatment of patients with maxillary first premolar and three root canals are described. Result and Discussion: It is noted that good endodontic practice requires good knowledge of dental anatomy and possible variations, accurate X-ray images, as well as use of magnifying equipment. Conclusion: Knowledge of dental anatomy is fundamental for good endodontic practice.

  20. Canalization and symmetry in Boolean models for genetic regulatory networks

    Energy Technology Data Exchange (ETDEWEB)

    Reichhardt, C J Olson [Theoretical Division and Center for Nonlinear Studies, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Bassler, Kevin E [Department of Physics, University of Houston, Houston, TX 77204-5005 (United States)

    2007-04-20

    Canalization of genetic regulatory networks has been argued to be favoured by evolutionary processes due to the stability that it can confer to phenotype expression. We explore whether a significant amount of canalization and partial canalization can arise in purely random networks in the absence of evolutionary pressures. We use a mapping of the Boolean functions in the Kauffman N-K model for genetic regulatory networks onto a k-dimensional Ising hypercube (where k = K) to show that the functions can be divided into different classes strictly due to geometrical constraints. The classes can be counted and their properties determined using results from group theory and isomer chemistry. We demonstrate that partially canalizing functions completely dominate all possible Boolean functions, particularly for higher k. This indicates that partial canalization is extremely common, even in randomly chosen networks, and has implications for how much information can be obtained in experiments on native state genetic regulatory networks.

  1. A maxillary central incisor with four root canals

    Directory of Open Access Journals (Sweden)

    Fábio de Almeida-Gomes

    2012-01-01

    Full Text Available The objective of the present study is to present a case report of endodontic treatment of a maxillary central incisor with 1 root and 4 root canals. The success of endodontic treatment requires knowledge of dental anatomy and its variations. This clinical article reports an unusual anatomy detected in a maxillary central incisor with 4 root canals with an associated periapical lesion. The incidence of 4 root canals in this tooth is rare. However, it must be taken into consideration, the clinical and radiographic evaluations during the endodontic treatment in order to enhance the diagnostic. Many times, the presence of a supernumerary canal is noticed only after canal treatment due to continuing post-operative discomfort or treatment failure.

  2. Hydrology and environmental aspects of Erie Canal (1817-99)

    Science.gov (United States)

    Langbein, Walter Basil

    1976-01-01

    As the first major water project in the United States, the old Erie Canal provides an example of the hydrological and environmental consequences of water development. The available record shows that the project aroused environmental fears that the canal might be impaired by the adverse hydrologic effects of land development induced by the canal. Water requirements proved greater than anticipated, and problems of floods and hydraulic inefficiencies beset navigation throughout its history. The Erie Canal proved the practicality of major hydraulic works to the extent that operations and maintenance could cope with the burdens of deficiencies in design. The weight of prior experience that upland streams, such as the Potomac and Mohawk Rivers, had proved unsatisfactory for dependable navigation, led to a decision to build an independent canal which freed the location from the constraints of river channels and made possible a cross-country water route directly to Lake Erie. The decision on dimensioning the canal prism--chiefly width and depth-involved balance between a fear of building too small and thus not achieving the economic potentials, and a fear of building too expensively. The constraints proved effective, and for the first part of its history the revenues collected were sufficient to repay all costs. So great was the economic advantage of the canal that the rising trend in traffic soon induced an enlargement of the canal cross section, based upon a new but riskier objective-build as large as the projected trend in toll revenues would finance. The increased revenues did not materialize. Water supplies were a primary concern for both the planners and the operators of the canal. Water required for lockage, although the most obvious to the planners, proved to be a relatively minor item compared with the amounts of water that were required to compensate for leakage through the bed and banks of the canal. Leakage amounted to about 8 inches of depth per day. The total

  3. Precise fixpoint computation through strategy iteration

    DEFF Research Database (Denmark)

    Gawlitza, Thomas; Seidl, Helmut

    2007-01-01

    We present a practical algorithm for computing least solutions of systems of equations over the integers with addition, multiplication with positive constants, maximum and minimum. The algorithm is based on strategy iteration. Its run-time (w.r.t. the uniform cost measure) is independent...

  4. Development of advanced inductive scenarios for ITER

    NARCIS (Netherlands)

    Luce, T. C.; Challis, C. D.; Ide, S.; Joffrin, E.; Kamada, Y.; Polizer, P. A.; Schweinzer, J.; Sips, A.C.C.; Stober, J.; Giruzzi, G.; Kessel, C. E.; Murakami, M.; Na, Y.-S.; Park, J. M.; Polevoi, A. R.; Budny, R. V.; Citrin, J.; Garcia, J.; Hayashi, N.; Hobirk, J.; Hudson, B. F.; Imbeaux, F.; Isayama, A.; McDonald, D. C.; Nakano, T.; Oyama, N.; Parail, V.V.; Petrie, T. W.; Petty, C. C.; Suzuki, T.; Wade, M. R.

    2014-01-01

    Since its inception in 2002, the International Tokamak Physics Activity topical group on Integrated Operational Scenarios (IOS) has coordinated experimental and modelling activity on the development of advanced inductive scenarios for applications in the ITER tokamak. The physics basis and the prosp

  5. Iterative Reconstruction for Differential Phase Contrast Imaging

    NARCIS (Netherlands)

    Koehler, T.; Brendel, B.; Roessl, E.

    2011-01-01

    Purpose: The purpose of this work is to combine two areas of active research in tomographic x-ray imaging. The first one is the use of iterative reconstruction techniques. The second one is differential phase contrast imaging (DPCI). Method: We derive an SPS type maximum likelihood (ML) reconstructi

  6. ITER faces further five-year delay

    Science.gov (United States)

    Clery, Daniel

    2016-06-01

    The €14bn ITER fusion reactor currently under construction in Cadarache, France, will require an additional cash injection of €4.6bn if it is to start up in 2025 - a target date that is already five years later than currently scheduled.

  7. Interpolation and Iteration for Nonlinear Filters

    CERN Document Server

    Chorin, Alexandre J

    2009-01-01

    We present a general form of the iteration and interpolation process used in implicit particle filters. Implicit filters are based on a pseudo-Gaussian representation of posterior densities, and are designed to focus the particle paths so as to reduce the number of particles needed in nonlinear data assimilation. Examples are given.

  8. AN ITERATIVE EQUATION ON THE UNIT CIRCLE

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    A functional equation of nonlinear iterates is discussed on the circle S1 for its continuous solutions and differentiable solutions. By lifting to R, the existence, uniqueness and stability of those solutions are obtained. Techniques of continuation are used to guarantee the preservation of continuity and differentiability in lifting.

  9. Academic Training: The ITER project: technological challenges

    CERN Multimedia

    Françoise Benz

    2005-01-01

    2004-2005 ACADEMIC TRAINING PROGRAMME LECTURE SERIES 31 May, 1, 2, 3, June from 11:00 to 12:00 on 31 May and 2, 3, June. From 10:00 to 12:00 on 1 June - Main Auditorium, bldg. 500 The ITER project: technological challenges J. LISTER / CRPP-EPFL, Lausanne, CH and P. BRUZZONE / CRPP-EPFL, Zürich, CH The first lecture reminds us of the ITER challenges, presents hard engineering problems, typically due to mechanical forces and thermal loads and identifies where the physics uncertainties play a significant role in the engineering requirements. The second lecture presents soft engineering problems of measuring the plasma parameters, feedback control of the plasma and handling the physics data flow and slow controls data flow from a large experiment like ITER. The last three lectures focus on superconductors for fusion. The third lecture reviews the design criteria and manufacturing methods for 6 milestone-conductors of large fusion devices (T-7, T-15, Tore Supra, LHD, W-7X, ITER). The evolution of the...

  10. Academic Training: The ITER project: technological challenges

    CERN Multimedia

    Françoise Benz

    2005-01-01

    2004-2005 ACADEMIC TRAINING PROGRAMME LECTURE SERIES 31 May, 1, 2, 3, June from 11:00 to 12:00 on 31 May and 2, 3, June. From 10:00 to 12:00 on 1 June - Main Auditorium, bldg. 500 The ITER project: technological challenges J. LISTER / CRPP-EPFL, Lausanne and P. BRUZZONE / CRPP-EPFL, Zürich The first lecture reminds us of the ITER challenges, presents hard engineering problems, typically due to mechanical forces and thermal loads and identifies where the physics uncertainties play a significant role in the engineering requirements. The second lecture presents soft engineering problems of measuring the plasma parameters, feedback control of the plasma and handling the physics data flow and slow controls data flow from a large experiment like ITER. The last three lectures focus on superconductors for fusion. The third lecture reviews the design criteria and manufacturing methods for 6 milestone-conductors of large fusion devices (T-7, T-15, Tore Supra, LHD, W-7X, ITER). The evolution of the de...

  11. Matched filter based iterative adaptive approach

    Science.gov (United States)

    Nepal, Ramesh; Zhang, Yan Rockee; Li, Zhengzheng; Blake, William

    2016-05-01

    Matched Filter sidelobes from diversified LPI waveform design and sensor resolution are two important considerations in radars and active sensors in general. Matched Filter sidelobes can potentially mask weaker targets, and low sensor resolution not only causes a high margin of error but also limits sensing in target-rich environment/ sector. The improvement in those factors, in part, concern with the transmitted waveform and consequently pulse compression techniques. An adaptive pulse compression algorithm is hence desired that can mitigate the aforementioned limitations. A new Matched Filter based Iterative Adaptive Approach, MF-IAA, as an extension to traditional Iterative Adaptive Approach, IAA, has been developed. MF-IAA takes its input as the Matched Filter output. The motivation here is to facilitate implementation of Iterative Adaptive Approach without disrupting the processing chain of traditional Matched Filter. Similar to IAA, MF-IAA is a user parameter free, iterative, weighted least square based spectral identification algorithm. This work focuses on the implementation of MF-IAA. The feasibility of MF-IAA is studied using a realistic airborne radar simulator as well as actual measured airborne radar data. The performance of MF-IAA is measured with different test waveforms, and different Signal-to-Noise (SNR) levels. In addition, Range-Doppler super-resolution using MF-IAA is investigated. Sidelobe reduction as well as super-resolution enhancement is validated. The robustness of MF-IAA with respect to different LPI waveforms and SNR levels is also demonstrated.

  12. Asymptotic iteration approach to supersymmetric bistable potentials

    Institute of Scientific and Technical Information of China (English)

    H. Ciftci; O. ozer; P. Roy

    2012-01-01

    We examine quasi exactly solvable bistable potentials and their supersymmetric partners within the framework of the asymptotic iteration method (AIM).It is shown that the AIM produces excellent approximate spectra and that sometimes it is found to be more useful to use the partner potential for computation. We also discuss the direct application of the AIM to the Fokker-Planck equation.

  13. Neutronic analysis for bolometers in ITER

    Energy Technology Data Exchange (ETDEWEB)

    Suarez, A., E-mail: alejandro.suarez@iter.org [CIEMAT, Avda. Complutense 40, 28040 Madrid (Spain); Reichle, R.; Loughlin, M.; Polunovskiy, E.; Walsh, M. [ITER Organization, Route de Vinon sur Verdon, 13115, St. Paul lez Durance (France)

    2013-10-15

    Highlights: ► Radiation damage calculations for the bolometers in ITER. ► Redesign of the bolometric diagnostic in EPP01. ► New bolometer radiation damage values in EPP01 in the safe zone. -- Abstract: Neutronic considerations in ITER have such importance that they drive the design of many diagnostics and components of the machine, and bolometers are not an exception. Bolometer cameras will be installed on the vacuum vessel, viewing the plasma through the gaps between blanket modules, divertor, equatorial and upper port plugs. The ITER reference bolometer sensors are of a resistive type. For this study it is assumed that they are composed of a thin silicon nitride carrier film and platinum resistors disposed in a Wheatstone bridge configuration. Their assumed radiation hardness is 0.1 dpa. Neutronic calculations were performed with the Monte Carlo program MCNP5, the FENDL 2.1 nuclear data library and the latest B-lite ITER neutronic model with the appropriate modifications using the CAD to MCNP converter MCAM. A complete characterization of the neutron fluxes in all the bolometer locations and the calculation of neutron damage were performed. Values above the failure threshold damage were obtained for some of the bolometers, leading to a complete redesign of some parts of the bolometric system in order to extend its lifetime.

  14. ITER Cryoplant Final Design and Construction

    Science.gov (United States)

    Monneret, E.; Benkheira, L.; Fauve, E.; Henry, D.; Voigt, T.; Badgujar, S.; Chang, H.-S.; Vincent, G.; Forgeas, A.; Navion-Maillot, N.

    2017-02-01

    The ITER Tokamak supraconducting magnets, thermal shields and cryopumps will require tremendous amount of cooling power. With an average need of 75 kW at 4.5 K and of 600 kW at 80 K, ITER requires a world class cryogenic complex. ITER then relies on a Cryoplant which consists in a cluster of systems dedicated to the management of all fluids required for the Tokamak operation. From storage and purification to liquefaction and refrigeration, the Cryoplant will supply to the distribution system, all fluids to be circulated in the Tokamak. It includes Liquid Helium Plants and Liquid Nitrogen Plants, which generate all of the refrigeration power, an 80 K helium loop capable to circulate large quantities of helium through thermal shields, and all the auxiliaries required for gas storage, purification, and onsite nitrogen production. From the conceptual phase, the design of the Cryoplant has evolved and is now nearing completion. This proceeding will present the final design of the Cryoplant and the organization for the construction phase. Also the latest status of the ITER Cryogenic System will be introduced.

  15. Wood anatomical classification using iterative character weighing

    NARCIS (Netherlands)

    Hogeweg, P.; Koek-Noorman, J.

    1975-01-01

    In this paper we investigate the pattern of wood anatomical variation in some groups of Rubiaceae (i.e. Cinchoneae, Rondeletieae and Condamineae) by using a numerical pattern detection method which involves character weighing (Hogeweg 1975). In this method character weights are obtained iteratively

  16. Solving Differential Equations Using Modified Picard Iteration

    Science.gov (United States)

    Robin, W. A.

    2010-01-01

    Many classes of differential equations are shown to be open to solution through a method involving a combination of a direct integration approach with suitably modified Picard iterative procedures. The classes of differential equations considered include typical initial value, boundary value and eigenvalue problems arising in physics and…

  17. Halpern's Iteration in CAT(0 Spaces

    Directory of Open Access Journals (Sweden)

    Satit Saejung

    2010-01-01

    Full Text Available Motivated by Halpern's result, we prove strong convergence theorem of an iterative sequence in CAT(0 spaces. We apply our result to find a common fixed point of a family of nonexpansive mappings. A convergence theorem for nonself mappings is also discussed.

  18. Iterative solution of the Helmholtz equation

    Energy Technology Data Exchange (ETDEWEB)

    Larsson, E.; Otto, K. [Uppsala Univ. (Sweden)

    1996-12-31

    We have shown that the numerical solution of the two-dimensional Helmholtz equation can be obtained in a very efficient way by using a preconditioned iterative method. We discretize the equation with second-order accurate finite difference operators and take special care to obtain non-reflecting boundary conditions. We solve the large, sparse system of equations that arises with the preconditioned restarted GMRES iteration. The preconditioner is of {open_quotes}fast Poisson type{close_quotes}, and is derived as a direct solver for a modified PDE problem.The arithmetic complexity for the preconditioner is O(n log{sub 2} n), where n is the number of grid points. As a test problem we use the propagation of sound waves in water in a duct with curved bottom. Numerical experiments show that the preconditioned iterative method is very efficient for this type of problem. The convergence rate does not decrease dramatically when the frequency increases. Compared to banded Gaussian elimination, which is a standard solution method for this type of problems, the iterative method shows significant gain in both storage requirement and arithmetic complexity. Furthermore, the relative gain increases when the frequency increases.

  19. Deux comparatismes pour une anthropologie historique

    Directory of Open Access Journals (Sweden)

    Pierre-Olivier Dittmar

    2010-06-01

    Full Text Available Malgré des appels répétés depuis plus d’un siècle de la part des historiens, le comparatisme, qui est un élément majeur de l’anthropologie, demeure très peu pratiqué. Ce rejet est ici analysé comme un refus d’une quête des invariants de l’homme qui aboutirait à des résultats an-historiques. Un autre comparatisme est cependant possible, qui instrumentalise la confrontation des univers pour mieux relever les différences. C’est les conditions et les avantages d’une telle pratique qui sont ici exposés, à partir de l’exemple des tabous alimentaires.Despite the repeated calls by some historians for more than a century, many seldom practice a major element of anthropology: comparativism. This paper will analyze this rejection as a refusal to investigate the constants of the human experience that lead to a-historical conclusions. However, another kind of comparativism is possible, one that examines the contrast between cultures in order to better understand their differences. Using the case of dietary taboos, this paper will look at the conditions and advantages of such a practice.Nonostante i molteplici appelli da più di un secolo da parte degli storici, il comparatismo, che costituisce un elemento fondamentale dell’antropologia, è ancora oggi troppo poco spesso praticato. Si proporrà di interpretare questo rifiuto come un rifiuto della ricerca di invarianti umane che condurrebbe a risultati a-storici. Un’altra forma di comparatismo è nondimeno possibile, una forma precisamente che ricorre al confronto di universi diversi per meglio comprenderne le difference reciproche. L’articolo espone le condizioni e i vantaggi di questa metodologia di ricerca, a partire dall’esempio degli interdetti alimentari.

  20. 5 CFR 315.601 - Appointment of former employees of the Canal Zone Merit System or Panama Canal Employment System.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Appointment of former employees of the Canal Zone Merit System or Panama Canal Employment System. 315.601 Section 315.601 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS CAREER AND CAREER-CONDITIONAL EMPLOYMENT Career or Career-Conditional Appointment...

  1. ITER diagnostics ex-vessel engineering services

    Energy Technology Data Exchange (ETDEWEB)

    Arumugam, A.P., E-mail: arun.prakash@iter.org; Walker, C.I.; Andrew, P.; Barnsley, R.; Beltran, D.; Bertalot, L.; Dammann, A.; Direz, M.F.; Drevon, J.M.; Encheva, A.; Giacomin, T.; Hourtoule, J.; Kuehn, I.; Lanza, R.; Levesy, B.; Maquet, P.; Patel, K.M.; Patisson, L.; Pitcher, C.S.; Portales, M.; and others

    2013-10-15

    Highlights: • This paper describes about the ITER diagnostics ex-vessel engineering services. • It describes various diagnostics systems, its location and its environment. • Diagnostics interfaces with other services such as the buildings, HVAC, electrical services, cooling water, vacuum, liquid and gas distribution. • All the interfaces with these services are identified and defined. • Buildings services for diagnostics, such as penetrations, local shielding, embedment and temperature control are discussed. -- Abstract: Extensive diagnostics systems will be installed on the ITER machine to provide the measurements necessary to control, evaluate and optimize plasma performance in ITER and to further the understanding of plasma physics. These include measurements of temperature, density, impurity concentration, and particle and energy confinement times. ITER diagnostic systems extend from the center of the Tokamak to the various diagnostic areas, where they are controlled and acquired data is processed. This mainly includes the areas such as ports, port cells, gallery, diagnostics enclosures and cubicle areas. The diagnostics port plugs encloses the front end of the diagnostic systems and the diagnostics building houses the diagnostics equipment, instrumentation and control cubicles. There are several systems providing services to diagnostics. These mainly include ITER buildings, electrical power services, cooling water services, Heating Ventilation and Air Conditioning (HVAC), vacuum services, liquid and gas distribution services, cable engineering, de-tritiation systems, control cubicles, etc. Requirements of these service systems have to be defined, even though many of the diagnostics are at an early stage of development. It is a real challenge to define and to design diagnostics systems considering the constraints imposed by these service systems. This paper summarizes the provision of these services to the individual diagnostics and diagnostics areas

  2. Reduction of Enterococcus faecalis in curved root canals after various sizes and tapers of canal preparation

    Directory of Open Access Journals (Sweden)

    Amir Abbas Moshari

    2015-01-01

    Full Text Available Aims: The aim of this study was to evaluate the reduction of Enterococcus faecalis in curved root canals after various sizes and tapers of the canal preparation. Materials and Methods: Mandibular first molars (n = 103 with curved mesiobuccal canals were divided into one control (n = 5 and 7 experimental (n = 14 groups, were inoculated with E. faecalis (ATTC 29212 and prepared with the following RaCe files (FKG Dentaire as master apical file: Groups: 25.04, 25.06, 30.04, 30.06, 35.04, 35.06 and 40.06. All the experimental groups were irrigated with 2 mL of 1% sodium hypochlorite during instrumentation and finally rinsed with 17% ethylenediaminetetraacetic acid (EDTA (2 mL followed by 5.25% NaOCl (2 mL and sterile distilled water. Colony counting was performed after incubation. Statistical Analysis Used: Resulting data were analyzed using one-way ANOVA and Tukey′s post-hoc test, (P < 0.05. Results and Conclusions: All the experimental groups showed significant bacterial reduction (P < 0.001. Although the greater the size/taper or both led to more decreased amount of bacteria, differences between the groups with the identical size and different tapers, and among the groups with the same taper and different sizes were not significant. Based on this study, 25.04 along with using 2 mL of 1% NaOCl during instrumentation, and using 17% EDTA and 5.25% NaOCl as final rinse successively after the termination of preparation, can effectively reduce intra-canal bacteria and preserve root structure.

  3. MANAGEMENT OF LUMBAR SPINAL CANAL STENOSIS

    Directory of Open Access Journals (Sweden)

    Mukhergee G. S

    2016-06-01

    Full Text Available BACKGROUND Spinal stenosis is one of the most common conditions in the elderly. It is defined as a narrowing of the spinal canal. The term stenosis is derived from the Greek word for narrow, which is “Stenos”. The first description of this condition is attributed to Antoine portal in 1803. Verbiest is credited with coining the term spinal stenosis and the associated narrowing of the spinal canal as its potential cause. [1-10] Kirkaldy–Willis subsequently described the degenerative cascade in the lumbar spine as the cause for the altered anatomy and pathophysiology in spinal stenosis. [11-15] If compression does not occur, the canal should be described as narrow but not stenotic. Some studies defined lumbar spinal stenosis as a “narrowing of the osteoligamentous vertebral canal and/or the intervertebral foramina causing compression of the thecal sac and/or the caudal nerve roots; at a single vertebral level, narrowing may affect the whole canal or part of it” (Postacchini 1983. This definition distinguished between disc herniation and stenosis. [16] . The most common type of spinal stenosis is caused by degenerative arthritis of the spine. Hypertrophy and ossification of the posterior longitudinal ligament which usually are confined to the cervical spine, and diffuse idiopathic skeletal hyperostosis (DISH syndrome also may result in an acquired form of spinal stenosis. Congenital forms caused by disorders such as achondroplasia and dysplastic spondylolisthesis are much less common. Congenital spinal stenosis usually is central and is evident or imaging studies. Idiopathic congenital narrowing usually involves the anteroposterior dimension of the canal secondary to short pedicles; the patient otherwise is normal. In contrast, in achondroplasia, the canal is narrowed in the anteroposterior plane owing to shortened pedicles and in lateral dimension because of diminished interpedicular distance. Acquired forms of spinal stenosis usually are

  4. Facial Canal Dehiscence in Patients with Chronic Otitis Surgery

    Directory of Open Access Journals (Sweden)

    Ahmet Uluat

    2016-04-01

    Full Text Available Aim: To examine facial canal status in patients with chronic otitis media (COM surgery and to detect the relation between facial canals dehiscence (FCD with middle ear pathology in these patients. Material and Method: The surgery data of patients who were subjected to tympanoplasty with or without mastoidectomy and radical mastoidectomy due to COM were analyzed retrospectively from January 2006 to December 2012. In addition to demonstrative data of the patients, status of facial canal and preoperative diagnoses of patients, type of the operation performed, status of middle ear, number of surgeries, existence of cholesteatoma, existence of ossicular chain defect, lateral canal defect and dura defect were assessed and the relation thereof with facial canal dehiscence (FCD was analyzed statistically. Results: Seven hundred ninety six patients were included in the study. FCD was detected in 10.05% of the patients. FCD was most frequently observed in the tympanic segment. It was found out that there was a statistically significant relationship of middle ear pathology, cholesteatoma, revision surgery, lateral semicircular canal and ossicular chain defect with FCD. Discussion: COM diagnosed patients may have defect in facial canal according to their preoperative diagnoses, middle ear pathologies, number of operations and ossicular chain defects. These patients should be applied a more careful surgery and closely followed up in postoperative periods.

  5. Model Based Iterative Reconstruction for Bright Field Electron Tomography (Postprint)

    Science.gov (United States)

    2013-02-01

    Reconstruction Technique ( SIRT ) are applied to the data. Model based iterative reconstruction (MBIR) provides a powerful framework for tomographic...the reconstruction when the typical algorithms such as Filtered Back Projection (FBP) and Simultaneous Iterative Reconstruction Technique ( SIRT ) are

  6. Methods used for research regarding iteration in instructional design

    NARCIS (Netherlands)

    Verstegen, D.M.L.

    2004-01-01

    This paper focuses on the search for suitable research methods for research regarding iteration in instructional design. More specifically my research concerned the question how instructional designers can be supported during an iterative design process. Although instructional design and development

  7. Optimised Iteration in Coupled Monte Carlo - Thermal-Hydraulics Calculations

    Science.gov (United States)

    Hoogenboom, J. Eduard; Dufek, Jan

    2014-06-01

    This paper describes an optimised iteration scheme for the number of neutron histories and the relaxation factor in successive iterations of coupled Monte Carlo and thermal-hydraulic reactor calculations based on the stochastic iteration method. The scheme results in an increasing number of neutron histories for the Monte Carlo calculation in successive iteration steps and a decreasing relaxation factor for the spatial power distribution to be used as input to the thermal-hydraulics calculation. The theoretical basis is discussed in detail and practical consequences of the scheme are shown, among which a nearly linear increase per iteration of the number of cycles in the Monte Carlo calculation. The scheme is demonstrated for a full PWR type fuel assembly. Results are shown for the axial power distribution during several iteration steps. A few alternative iteration method are also tested and it is concluded that the presented iteration method is near optimal.

  8. Quelle cible pour le service à rendre ? Proposition pour un changement de paradigme

    OpenAIRE

    Bercot, Régine

    2014-01-01

    National audience; Les précédentes contributions ont montré que la qualité du service est liée aux modalités de sa construction, ce qui conduit pour l’améliorer à prendre en compte le travail de ceux qui le rendent concrètement et qui peuvent l’ajuster aux diverses situations rencontrées. Nous partirons aussi du constat selon lequel la définition d’un service rendu fait rarement l’objet d’un débat organisé. La thèse que nous développerons ici vient en appui de ces précédentes remarques. Nous ...

  9. Guide pour la conception des dispositifs de franchissement des barrages pour les poissons migrateurs

    Directory of Open Access Journals (Sweden)

    LARINIER M.

    1983-10-01

    Full Text Available L'auteur rappelle dans cette note les principes de base devant guider le projeteur lors de la conception des ouvrages de franchissement de barrages ou d'obstacles pour les poissons migrateurs. L'accent est mis sur l'importance de la situation et de l'attractivité de ces ouvrages. Les principes de fonctionnement et les critères de dimensionnement des différents types de passes (passes à bassins successifs, passes à ralentisseurs, écluses et ascenseurs sont évoqués. Dans la dernière partie sont recensés les éléments à prendre en compte lors de l'établissement d'un projet de passe.

  10. Assessing the accuracy of tympanometric evaluation of external auditory canal volume: a scientific study using an ear canal model.

    Science.gov (United States)

    Al-Hussaini, A; Owens, D; Tomkinson, A

    2011-12-01

    Tympanometric evaluation is routinely used as part of the complete otological examination. During tympanometric examination, evaluation of middle ear pressure and ear canal volume is undertaken. Little is reported in relation to the accuracy and precision tympanometry evaluates external ear canal volume. This study examines the capability of the tympanometer to accurately evaluate external auditory canal volume in both simple and partially obstructed ear canal models and assesses its capability to be used in studies examining the effectiveness of cerumolytics. An ear canal model was designed using simple laboratory equipment, including a 5 ml calibrated clinical syringe (Becton Dickinson, Spain). The ear canal model was attached to the sensing probe of a Kamplex tympanometer (Interacoustics, Denmark). Three basic trials were undertaken: evaluation of the tympanometer in simple canal volume measurement, evaluation of the tympanometer in assessing canal volume with partial canal occlusion at different positions within the model, and evaluation of the tympanometer in assessing canal volume with varying degrees of canal occlusion. 1,290 individual test scenarios were completed over the three arms of the study. At volumes of 1.4 cm(3) or below, a perfect relationship was noted between the actual and tympanometric volumes in the simple model (Spearman's ρ = 1) with weakening degrees of agreement with increasing volume of the canal. Bland-Altman plotting confirmed the accuracy of this agreement. In the wax substitute models, tympanometry was observed to have a close relationship (Spearman's ρ > 0.99) with the actual volume present with worsening error above a volume of 1.4 cm(3). Bland-Altman plotting and precision calculations provided evidence of accuracy. Size and position of the wax substitute had no statistical effect on results [Wilcoxon rank-sum test (WRST) p > 0.99], nor did degree of partial obstruction (WRST p > 0.99). The Kamplex tympanometer

  11. Bacterial coronal leakage after obturation with three root canal sealers.

    Science.gov (United States)

    Timpawat, S; Amornchat, C; Trisuwan, W R

    2001-01-01

    The purpose of this study was to compare the bacterial leakage of root canals obturated with three root canal sealers, using Endodontalis faecalis as a microbial tracer to determine the length of time for bacteria to penetrate through the obturated root canal to the root apex. Seventy-five, single-rooted teeth with straight root canals had the crown cut off at the cementoenamel junction. Root canals were instrumented by a step-back technique. The prepared teeth were randomly divided into 3 groups of 19 teeth each and another 2 groups as positive and negative controls (9 teeth each). The experimental groups were dependent on the sealer used: AH-Plus, Apexit, and Ketac-Endo. The root canals were obturated using a lateral condensation technique. After 24 h the teeth were attached to microcentrifuge tubes with 2 mm of the root apex submerged in Brain Heart Infusion broth in glass test tubes. The coronal portions of the root canal filling materials were placed in contact with E. faecalis. The teeth were observed for bacterial leakage daily for 30 and 60 days. With the chi2 test for comparing pairs of groups at the 0.05 level (p 0.06), but Apexit had significantly higher leakage (p 0.05), but Apexit leaked more than AH-Plus. The conclusion drawn from this experiment was that epoxy resin root canal sealer was found to be more adaptable to the root canal wall and filling material than a calcium hydroxide sealer when bacterial coronal leakage was studied.

  12. A short remark on fractional variational iteration method

    Energy Technology Data Exchange (ETDEWEB)

    He, Ji-Huan, E-mail: hejihuan@suda.edu.cn [National Engineering Laboratory for Modern Silk, College of Textile and Engineering, Soochow University, 199 Ren-ai Road, Suzhou 215123 (China)

    2011-09-05

    This Letter compares the classical variational iteration method with the fractional variational iteration method. The fractional complex transform is introduced to convert a fractional differential equation to its differential partner, so that its variational iteration algorithm can be simply constructed. -- Highlights: → The variational iteration method and its fractional modification are compared. → The demerits arising are overcome by the fractional complex transform. → The Letter provides a powerful tool to solving fractional differential equations.

  13. Horizontal canal benign paroxysmal positional vertigo in a fighter pilot

    OpenAIRE

    Su-Jiang Xie; Jiang-Chang Wang; Li Ding; Xi-Qing Sun

    2011-01-01

    Benign paroxysmal positional vertigo (BPPV) is the most common disorder of the peripheral vestibular system, characterized by intense, positional provoked vertigo. BPPV is thought to occur due to canalithiasis of the posterior semicircular canal. Recently, a new entity of BPPV, known as horizontal canal (HC)-BPPV, has been recognized. Although only 3 to 8% of BPPV is due to horizontal canal involvement, HC-BPPV is not rare. We present a case of a naval fighter pilot who had an incident of HC-...

  14. Horizontal canal benign paroxysmal positional vertigo in a fighter pilot

    Directory of Open Access Journals (Sweden)

    Su-Jiang Xie

    2011-01-01

    Full Text Available Benign paroxysmal positional vertigo (BPPV is the most common disorder of the peripheral vestibular system, characterized by intense, positional provoked vertigo. BPPV is thought to occur due to canalithiasis of the posterior semicircular canal. Recently, a new entity of BPPV, known as horizontal canal (HC-BPPV, has been recognized. Although only 3 to 8% of BPPV is due to horizontal canal involvement, HC-BPPV is not rare. We present a case of a naval fighter pilot who had an incident of HC-BPPV on the ground. The pilot aeromedical evaluation and considerations are discussed.

  15. Horizontal canal benign paroxysmal positional vertigo in a fighter pilot.

    Science.gov (United States)

    Xie, Su-Jiang; Wang, Jiang-Chang; Ding, Li; Sun, Xi-Qing

    2011-01-01

    Benign paroxysmal positional vertigo (BPPV) is the most common disorder of the peripheral vestibular system, characterized by intense, positional provoked vertigo. BPPV is thought to occur due to canalithiasis of the posterior semicircular canal. Recently, a new entity of BPPV, known as horizontal canal (HC)-BPPV, has been recognized. Although only 3 to 8% of BPPV is due to horizontal canal involvement, HC-BPPV is not rare. We present a case of a naval fighter pilot who had an incident of HC-BPPV on the ground. The pilot aeromedical evaluation and considerations are discussed.

  16. Faraday ghosts depolarization canals in the Galactic radio emission

    CERN Document Server

    Shukurov, A M; Shukurov, Anvar; Berkhuijsen, Elly M.

    2003-01-01

    Narrow, elongated regions of very low polarized intensity -- so-called canals -- have recently been observed by several authors at decimeter wavelengths in various directions in the Milky Way, but their origin remains enigmatic. We show that the canals arise from depolarization by differential Faraday rotation in the interstellar medium and that they represent level lines of Faraday rotation measure RM, a random function of position in the sky. Statistical properties of the separation of canals depend on the autocorrelation function of RM, and so provide a useful tool for studies of interstellar turbulence.

  17. Route Selection by Tankers(Dirty) at the Suez Canal

    Institute of Scientific and Technical Information of China (English)

    Risto Laulajainen

    2007-01-01

    <正>The Suez Canal,attached route alternatives with traffic flows and areas are described and theoretical break-even points derived. Logistically,route selection depends on relative distances,the level of spot rates and canal dues,the sensitivity to change growing with rising rate levels.The connection is diluted by the canal /pipeline owners’ price differentiation and the charterers’ capital costs;interest on cargo and change of its value during transit.Ship-owners are largely neutral to route choice as long as rates and main cost items are directly related to distance.

  18. Constricted Canals: A New Strategy to Overcome This Challenge

    Directory of Open Access Journals (Sweden)

    Ricardo Machado

    2014-01-01

    Full Text Available Negotiation of constricted canals can be a challenge during endodontic treatment. Over the years, several strategies have been presented in order to overcome the difficulties imposed by this anatomical feature. This paper presents three cases using a different protocol from that recommended by the manufacturer of the Protaper System in order to facilitate the negotiation of constricted canals. These cases suggest that the modified protocol shown is able to perform the shaping process with less resistance, reducing the risk of instrument separation and performing an effective process to reach the apical thirds in constricted canals.

  19. Cytogenetic findings in persons living near the Love Canal.

    Science.gov (United States)

    Heath, C W; Nadel, M R; Zack, M M; Chen, A T; Bender, M A; Preston, R J

    1984-03-16

    Cytogenetic analyses were performed on peripheral blood from 46 present or past residents of the area surrounding Love Canal, a former dump site for chemical wastes in Niagara Falls, NY. Participants included 17 persons in whom cytogenetic analyses had been performed in 1980 and 29 persons who had been living in 1978 in seven homes that directly adjoined the canal and in which environmental tests showed elevated levels of chemicals spreading from the canal. Frequencies of chromosomal aberrations and of sister chromatid exchange (SCE) did not differ significantly from control levels. For all participants, cigarette smoking was associated with an increase in sister chromatid exchange frequency.

  20. Development and benchmarking of TASSER(iter) for the iterative improvement of protein structure predictions.

    Science.gov (United States)

    Lee, Seung Yup; Skolnick, Jeffrey

    2007-07-01

    To improve the accuracy of TASSER models especially in the limit where threading provided template alignments are of poor quality, we have developed the TASSER(iter) algorithm which uses the templates and contact restraints from TASSER generated models for iterative structure refinement. We apply TASSER(iter) to a large benchmark set of 2,773 nonhomologous single domain proteins that are iter) models have a smaller global average RMSD of 5.48 A compared to 5.81 A RMSD of the original TASSER models. Classifying the targets by the level of prediction difficulty (where Easy targets have a good template with a corresponding good threading alignment, Medium targets have a good template but a poor alignment, and Hard targets have an incorrectly identified template), TASSER(iter) (TASSER) models have an average RMSD of 4.15 A (4.35 A) for the Easy set and 9.05 A (9.52 A) for the Hard set. The largest reduction of average RMSD is for the Medium set where the TASSER(iter) models have an average global RMSD of 5.67 A compared to 6.72 A of the TASSER models. Seventy percent of the Medium set TASSER(iter) models have a smaller RMSD than the TASSER models, while 63% of the Easy and 60% of the Hard TASSER models are improved by TASSER(iter). For the foldable cases, where the targets have a RMSD to the native iter) shows obvious improvement over TASSER models: For the Medium set, it improves the success rate from 57.0 to 67.2%, followed by the Hard targets where the success rate improves from 32.0 to 34.8%, with the smallest improvement in the Easy targets from 82.6 to 84.0%. These results suggest that TASSER(iter) can provide more reliable predictions for targets of Medium difficulty, a range that had resisted improvement in the quality of protein structure predictions.

  1. General Object-oriented Framework for Iterative Optimization Algorithms

    OpenAIRE

    Mornar, Vedran; Vanjak, Zvonimir

    2001-01-01

    It is usually impossible to exactly solve the hard optimization problems. One is thus directed to iterative algorithms. In implementation of these iterative algorithms, some common characteristics can be observed, which can be generalized in an object-oriented framework. This can significantly reduce the time needed for implementation of an iterative algorithm.

  2. Iterative algorithms to approximate canonical Gabor windows: Computational aspects

    DEFF Research Database (Denmark)

    Janssen, A.J.E.M; Søndergaard, Peter Lempel

    In this paper we investigate the computational aspects of some recently proposed iterative methods for approximating the canonical tight and canonical dual window of a Gabor frame (g,a,b). The iterations start with the window g while the iteration steps comprise the window g, the k^th iterand...

  3. Iterative algorithms to approximate canonieal Gabor windows: Computational aspects

    DEFF Research Database (Denmark)

    Janssen, A. J. E. M.; Søndergaard, Peter Lempel

    2007-01-01

    In this article we investigate the computational aspects of some recently proposed iterative methods for approximating the canonical tight and canonical dual window of a Gabor frame (g, a, b). The iterations start with the window g while the iteration steps comprise the window g, the k(th) iterand...

  4. An iterative algorithm for solving a class of matrix equations

    Institute of Scientific and Technical Information of China (English)

    Minghui WANG; Yan FENG

    2009-01-01

    In this paper,an iterative algorithm is presented to solve the Sylvester and Lyapunov matrix equations.By this iterative algorithm,for any initial matrix X1,a solution X* can be obtained within finite iteration steps in the absence of roundoff errors.Some examples illustrate that this algorithm is very efficient and better than that of [1] and [2].

  5. File list: InP.CDV.10.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available InP.CDV.10.AllAg.Atrioventicular_canals mm9 Input control Cardiovascular Atrioventicular canal...s http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/InP.CDV.10.AllAg.Atrioventicular_canals.bed ...

  6. File list: DNS.CDV.50.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.CDV.50.AllAg.Atrioventicular_canals mm9 DNase-seq Cardiovascular Atrioventicular canal...s http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/DNS.CDV.50.AllAg.Atrioventicular_canals.bed ...

  7. File list: Oth.CDV.05.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.CDV.05.AllAg.Atrioventicular_canals mm9 TFs and others Cardiovascular Atrioventicular canal...s SRX1271841 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.CDV.05.AllAg.Atrioventicular_canals.bed ...

  8. File list: Oth.CDV.10.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.CDV.10.AllAg.Atrioventicular_canals mm9 TFs and others Cardiovascular Atrioventicular canal...s SRX1271841 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.CDV.10.AllAg.Atrioventicular_canals.bed ...

  9. File list: InP.CDV.20.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available InP.CDV.20.AllAg.Atrioventicular_canals mm9 Input control Cardiovascular Atrioventicular canal...s http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/InP.CDV.20.AllAg.Atrioventicular_canals.bed ...

  10. File list: DNS.CDV.05.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.CDV.05.AllAg.Atrioventicular_canals mm9 DNase-seq Cardiovascular Atrioventicular canal...s http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/DNS.CDV.05.AllAg.Atrioventicular_canals.bed ...

  11. File list: Pol.CDV.20.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.CDV.20.AllAg.Atrioventicular_canals mm9 RNA polymerase Cardiovascular Atrioventicular canal...s http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Pol.CDV.20.AllAg.Atrioventicular_canals.bed ...

  12. File list: NoD.CDV.20.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available NoD.CDV.20.AllAg.Atrioventicular_canals mm9 No description Cardiovascular Atrioventicular canal...s http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/NoD.CDV.20.AllAg.Atrioventicular_canals.bed ...

  13. File list: NoD.CDV.05.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available NoD.CDV.05.AllAg.Atrioventicular_canals mm9 No description Cardiovascular Atrioventicular canal...s http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/NoD.CDV.05.AllAg.Atrioventicular_canals.bed ...

  14. File list: Pol.CDV.05.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.CDV.05.AllAg.Atrioventicular_canals mm9 RNA polymerase Cardiovascular Atrioventicular canal...s http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Pol.CDV.05.AllAg.Atrioventicular_canals.bed ...

  15. File list: DNS.CDV.10.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.CDV.10.AllAg.Atrioventicular_canals mm9 DNase-seq Cardiovascular Atrioventicular canal...s http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/DNS.CDV.10.AllAg.Atrioventicular_canals.bed ...

  16. File list: Pol.CDV.50.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.CDV.50.AllAg.Atrioventicular_canals mm9 RNA polymerase Cardiovascular Atrioventicular canal...s http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Pol.CDV.50.AllAg.Atrioventicular_canals.bed ...

  17. File list: ALL.CDV.50.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.CDV.50.AllAg.Atrioventicular_canals mm9 All antigens Cardiovascular Atrioventicular canal...s SRX1271841 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/ALL.CDV.50.AllAg.Atrioventicular_canals.bed ...

  18. File list: ALL.CDV.10.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.CDV.10.AllAg.Atrioventicular_canals mm9 All antigens Cardiovascular Atrioventicular canal...s SRX1271841 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/ALL.CDV.10.AllAg.Atrioventicular_canals.bed ...

  19. File list: DNS.CDV.20.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.CDV.20.AllAg.Atrioventicular_canals mm9 DNase-seq Cardiovascular Atrioventicular canal...s http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/DNS.CDV.20.AllAg.Atrioventicular_canals.bed ...

  20. File list: InP.CDV.05.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available InP.CDV.05.AllAg.Atrioventicular_canals mm9 Input control Cardiovascular Atrioventicular canal...s http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/InP.CDV.05.AllAg.Atrioventicular_canals.bed ...

  1. File list: ALL.CDV.20.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.CDV.20.AllAg.Atrioventicular_canals mm9 All antigens Cardiovascular Atrioventicular canal...s SRX1271841 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/ALL.CDV.20.AllAg.Atrioventicular_canals.bed ...

  2. File list: NoD.CDV.10.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available NoD.CDV.10.AllAg.Atrioventicular_canals mm9 No description Cardiovascular Atrioventicular canal...s http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/NoD.CDV.10.AllAg.Atrioventicular_canals.bed ...

  3. File list: InP.CDV.50.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available InP.CDV.50.AllAg.Atrioventicular_canals mm9 Input control Cardiovascular Atrioventicular canal...s http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/InP.CDV.50.AllAg.Atrioventicular_canals.bed ...

  4. File list: NoD.CDV.50.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available NoD.CDV.50.AllAg.Atrioventicular_canals mm9 No description Cardiovascular Atrioventicular canal...s http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/NoD.CDV.50.AllAg.Atrioventicular_canals.bed ...

  5. File list: Oth.CDV.20.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.CDV.20.AllAg.Atrioventicular_canals mm9 TFs and others Cardiovascular Atrioventicular canal...s SRX1271841 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.CDV.20.AllAg.Atrioventicular_canals.bed ...

  6. File list: Oth.CDV.50.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.CDV.50.AllAg.Atrioventicular_canals mm9 TFs and others Cardiovascular Atrioventicular canal...s SRX1271841 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.CDV.50.AllAg.Atrioventicular_canals.bed ...

  7. File list: ALL.CDV.05.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.CDV.05.AllAg.Atrioventicular_canals mm9 All antigens Cardiovascular Atrioventicular canal...s SRX1271841 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/ALL.CDV.05.AllAg.Atrioventicular_canals.bed ...

  8. File list: Pol.CDV.10.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.CDV.10.AllAg.Atrioventicular_canals mm9 RNA polymerase Cardiovascular Atrioventicular canal...s http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Pol.CDV.10.AllAg.Atrioventicular_canals.bed ...

  9. Iterative learning control an optimization paradigm

    CERN Document Server

    Owens, David H

    2016-01-01

    This book develops a coherent theoretical approach to algorithm design for iterative learning control based on the use of optimization concepts. Concentrating initially on linear, discrete-time systems, the author gives the reader access to theories based on either signal or parameter optimization. Although the two approaches are shown to be related in a formal mathematical sense, the text presents them separately because their relevant algorithm design issues are distinct and give rise to different performance capabilities. Together with algorithm design, the text demonstrates that there are new algorithms that are capable of incorporating input and output constraints, enable the algorithm to reconfigure systematically in order to meet the requirements of different reference signals and also to support new algorithms for local convergence of nonlinear iterative control. Simulation and application studies are used to illustrate algorithm properties and performance in systems like gantry robots and other elect...

  10. The Cryostat and Subsystems Development at ITER

    Science.gov (United States)

    Sekachev, Igor; Meekins, Michael; Sborchia, Carlo; Vitupier, Guillaume; Xie, Han; Zhou, Caipin

    ITER is a large experimental tokamak being built to research fusion power. The ITER cryostat is a multifunctional system which provides vacuum insulation for the superconducting magnets operating at 4.5 K and for the thermal shield operating at 80 K. It also serves as a structural support for the tokamak and provides access ways and corridors to the vacuum vessel for diagnostic lines of sight, additional heating beams and the deployment of remote handling equipment. The cryostat has feed-through penetrations for all the equipment connecting elements of systems outside the cryostat to the corresponding elements inside the cryostat. The cryostat is a vacuum containment vessel having a very large volume of ∼16000 m3 designed to be evacuated to a base pressure of 10-4 Pa. Design details of the cryostat and associated systems, including Torus Cryopump Housing (TCPH), are discussed. Status report of the cryostat developments is presented.

  11. An Adaptive Iterated Nonlocal Interferometry Filtering Method

    Directory of Open Access Journals (Sweden)

    Lin Xue

    2014-04-01

    Full Text Available Interferometry filtering is one of the key steps in obtain high-precision Digital Elevation Model (DEM and Digital Orthophoto Map (DOM. In the case of low-correlation or complicated topography, traditional phase filtering methods fail in balancing noise elimination and phase preservation, which leads to inaccurate interferometric phase. This paper proposed an adaptive iterated nonlocal interferometry filtering method to deal with the problem. Based on the thought of nonlocal filtering, the proposed method filters the image with utilization of the image redundancy information. The smoothing parameter of the method is adaptive to the interferometry, and automatic iteration, in which the window size is adjusted, is applied to improve the filtering precision. Validity of the proposed method is verified by simulated and real data. Comparison with existed methods is given at the same time.

  12. Iterative Estimation in Turbo Equalization Process

    Directory of Open Access Journals (Sweden)

    MORGOS Lucian

    2014-05-01

    Full Text Available This paper presents the iterative estimation in turbo equalization process. Turbo equalization is the process of reception in which equalization and decoding are done together, not as separate processes. For the equalizer to work properly, it must receive before equalization accurate information about the value of the channel impulse response. This estimation of channel impulse response is done by transmission of a training sequence known at reception. Knowing both the transmitted and received sequence, it can be calculated estimated value of the estimated the channel impulse response using one of the well-known estimation algorithms. The estimated value can be also iterative recalculated based on the sequence data available at the output of the channel and estimated sequence data coming from turbo equalizer output, thereby refining the obtained results.

  13. ITER Materials R & D Data Bank

    Science.gov (United States)

    Tanaka, Shigeru; Matera, R.; Kalinin, G.; Barabash, V.; Mohri, K.

    To keep traceability of many valuable raw data that were experimentally obtained in the ITER Technology R&D Tasks related to materials for In-Vessel Components, and to easily make the best use of these data in design activities, the `ITER Materials R&D Data Bank' has been built up, with the use of Excel TM spread sheets. Compared with existing material data banks, this data bank is unique in the following respects: (1) In addition to thermo-mechanical properties of single materials (beryllium, tungsten, carbon-based materials, copper alloys and stainless steels), thermo-mechanical properties (including neutron irradiation effects) for various kinds of joints between these materials, and the results of thermal fatigue tests of mock-ups are collected. (2) As for plasma facing materials (beryllium, tungsten and carbon), experimental data on plasma-material interactions such as sputtering, disruption erosion, and hydrogen-isotope trapping and release are collected.

  14. New iterative solvers for the NAG Libraries

    Energy Technology Data Exchange (ETDEWEB)

    Salvini, S.; Shaw, G. [Numerical Algorithms Group Ltd., Oxford (United Kingdom)

    1996-12-31

    The purpose of this paper is to introduce the work which has been carried out at NAG Ltd to update the iterative solvers for sparse systems of linear equations, both symmetric and unsymmetric, in the NAG Fortran 77 Library. Our current plans to extend this work and include it in our other numerical libraries in our range are also briefly mentioned. We have added to the Library the new Chapter F11, entirely dedicated to sparse linear algebra. At Mark 17, the F11 Chapter includes sparse iterative solvers, preconditioners, utilities and black-box routines for sparse symmetric (both positive-definite and indefinite) linear systems. Mark 18 will add solvers, preconditioners, utilities and black-boxes for sparse unsymmetric systems: the development of these has already been completed.

  15. Iterative Brinkman penalization for remeshed vortex methods

    Science.gov (United States)

    Hejlesen, Mads Mølholm; Koumoutsakos, Petros; Leonard, Anthony; Walther, Jens Honoré

    2015-01-01

    We introduce an iterative Brinkman penalization method for the enforcement of the no-slip boundary condition in remeshed vortex methods. In the proposed method, the Brinkman penalization is applied iteratively only in the neighborhood of the body. This allows for using significantly larger time steps, than what is customary in the Brinkman penalization, thus reducing its computational cost while maintaining the capability of the method to handle complex geometries. We demonstrate the accuracy of our method by considering challenging benchmark problems such as flow past an impulsively started cylinder and normal to an impulsively started and accelerated flat plate. We find that the present method enhances significantly the accuracy of the Brinkman penalization technique for the simulations of highly unsteady flows past complex geometries.

  16. Automatic Control of ITER-like Structures

    Energy Technology Data Exchange (ETDEWEB)

    Bosia, G.; Bremond, S

    2005-07-01

    In ITER Ion Cyclotron System requires a power transfer efficiency in excess of 90% from power source to plasma in quasi continuous operation. This implies the availability of a control system capable of optimizing the array radiation spectrum, automatically acquiring impedance match between the power source and the plasma loaded array at the beginning of the power pulse and maintaining it against load variations due to plasma position and plasma edge parameters fluctuations, rapidly detecting voltage breakdowns in the array and/or in the transmission system and reliably discriminating them from fast load variations. In this paper a proposal for a practical ITER control system, including power, phase, frequency and impedance matching is described. (authors)

  17. ITER Shape Controller and Transport Simulations

    Energy Technology Data Exchange (ETDEWEB)

    Casper, T A; Meyer, W H; Pearlstein, L D; Portone, A

    2007-05-31

    We currently use the CORSICA integrated modeling code for scenario studies for both the DIII-D and ITER experiments. In these simulations, free- or fixed-boundary equilibria are simultaneously converged with thermal evolution determined from transport models providing temperature and current density profiles. Using a combination of fixed boundary evolution followed by free-boundary calculation to determine the separatrix and coil currents. In the free-boundary calculation, we use the state-space controller representation with transport simulations to provide feedback modeling of shape, vertical stability and profile control. In addition to a tightly coupled calculation with simulator and controller imbedded inside CORSICA, we also use a remote procedure call interface to couple the CORSICA non-linear plasma simulations to the controller environments developed within the Mathworks Matlab/Simulink environment. We present transport simulations using full shape and vertical stability control with evolution of the temperature profiles to provide simulations of the ITER controller and plasma response.

  18. Mahalanobis Distance Based Iterative Closest Point

    DEFF Research Database (Denmark)

    Hansen, Mads Fogtmann; Blas, Morten Rufus; Larsen, Rasmus

    2007-01-01

    the notion of a mahalanobis distance map upon a point set with associated covariance matrices which in addition to providing correlation weighted distance implicitly provides a method for assigning correspondence during alignment. This distance map provides an easy formulation of the ICP problem that permits......This paper proposes an extension to the standard iterative closest point method (ICP). In contrast to ICP, our approach (ICP-M) uses the Mahalanobis distance to align a set of shapes thus assigning an anisotropic independent Gaussian noise to each point in the reference shape. The paper introduces...... a fast optimization. Initially, the covariance matrices are set to the identity matrix, and all shapes are aligned to a randomly selected shape (equivalent to standard ICP). From this point the algorithm iterates between the steps: (a) obtain mean shape and new estimates of the covariance matrices from...

  19. Extortion outperforms generosity in iterated Prisoners' Dilemma

    CERN Document Server

    Xu, Bin; Lien, Jaimie W; Zheng, Jie; Wang, Zhijian

    2015-01-01

    Promoting cooperation is an intellectual challenge in the social sciences, for which the iterated Prisoners' Dilemma (IPD) is a fundamental framework. The traditional view that there exists no simple ultimatum strategy whereby one player can unilaterally control the share of the surplus has been challenged by a new class of "zero-determinant" (ZD) strategies raised by Press and Dyson. In particular, the extortionate strategies can subdue the opponent and obtain higher scores. However, no empirical evidence has yet been found to support this theoretical finding. In a long-run laboratory experiment of the iterated Prisoners' Dilemma pairing each human subject with a computer co-player, we demonstrate that the extortionate strategy indeed outperforms the generous strategy against human subjects. Our results show that the extortionate strategy achieves higher scores than the generous strategy, the extortionate strategy promotes the cooperation rate to a similar level as the generous strategy does, and the human s...

  20. Iterative solution of high order compact systems

    Energy Technology Data Exchange (ETDEWEB)

    Spotz, W.F.; Carey, G.F. [Univ. of Texas, Austin, TX (United States)

    1996-12-31

    We have recently developed a class of finite difference methods which provide higher accuracy and greater stability than standard central or upwind difference methods, but still reside on a compact patch of grid cells. In the present study we investigate the performance of several gradient-type iterative methods for solving the associated sparse systems. Both serial and parallel performance studies have been made. Representative examples are taken from elliptic PDE`s for diffusion, convection-diffusion, and viscous flow applications.

  1. Europe wrestles with ITER site bid

    CERN Multimedia

    Feder, T

    2003-01-01

    "The European Union is in a quandary over whether to put forward the French or Spanish site to host ITER, a $5 billion magnetic fusion experiment intended to prove the feasability of fusion energy. The decision is set for 27 November, with the final site selection, between the victorious European bid and bids from Canada and Japan, to follow within a couple of months" (1 page)

  2. Iterative Reconstruction of Coded Source Neutron Radiographs

    Energy Technology Data Exchange (ETDEWEB)

    Santos-Villalobos, Hector J [ORNL; Bingham, Philip R [ORNL; Gregor, Jens [University of Tennessee, Knoxville (UTK)

    2012-01-01

    Use of a coded source facilitates high-resolution neutron imaging but requires that the radiographic data be deconvolved. In this paper, we compare direct deconvolution with two different iterative algorithms, namely, one based on direct deconvolution embedded in an MLE-like framework and one based on a geometric model of the neutron beam and a least squares formulation of the inverse imaging problem.

  3. Irreducible complexity of iterated symmetric bimodal maps

    Directory of Open Access Journals (Sweden)

    J. P. Lampreia

    2005-01-01

    Full Text Available We introduce a tree structure for the iterates of symmetric bimodal maps and identify a subset which we prove to be isomorphic to the family of unimodal maps. This subset is used as a second factor for a ∗-product that we define in the space of bimodal kneading sequences. Finally, we give some properties for this product and study the ∗-product induced on the associated Markov shifts.

  4. The Iterative Method of Generalized -Concave Operators

    Directory of Open Access Journals (Sweden)

    Zhou Yanqiu

    2011-01-01

    Full Text Available We define the concept of the generalized -concave operators, which generalize the definition of the -concave operators. By using the iterative method and the partial ordering method, we prove the existence and uniqueness of fixed points of this class of the operators. As an example of the application of our results, we show the existence and uniqueness of solutions to a class of the Hammerstein integral equations.

  5. AFFINE TRANSFORMATION IN RANDOM ITERATED FUNCTION SYSTEMS

    Institute of Scientific and Technical Information of China (English)

    熊勇; 史定华

    2001-01-01

    Random iterated function systems (IFSs) is discussed, which is one of the methods for fractal drawing. A certain figure can be reconstructed by a random IFS. One approach is presented to determine a new random IFS, that the figure reconstructed by the new random IFS is the image of the origin figure reconstructed by old IFS under a given affine transformation. Two particular examples are used to show this approach.

  6. Conformal mapping and convergence of Krylov iterations

    Energy Technology Data Exchange (ETDEWEB)

    Driscoll, T.A.; Trefethen, L.N. [Cornell Univ., Ithaca, NY (United States)

    1994-12-31

    Connections between conformal mapping and matrix iterations have been known for many years. The idea underlying these connections is as follows. Suppose the spectrum of a matrix or operator A is contained in a Jordan region E in the complex plane with 0 not an element of E. Let {phi}(z) denote a conformal map of the exterior of E onto the exterior of the unit disk, with {phi}{infinity} = {infinity}. Then 1/{vert_bar}{phi}(0){vert_bar} is an upper bound for the optimal asymptotic convergence factor of any Krylov subspace iteration. This idea can be made precise in various ways, depending on the matrix iterations, on whether A is finite or infinite dimensional, and on what bounds are assumed on the non-normality of A. This paper explores these connections for a variety of matrix examples, making use of a new MATLAB Schwarz-Christoffel Mapping Toolbox developed by the first author. Unlike the earlier Fortran Schwarz-Christoffel package SCPACK, the new toolbox computes exterior as well as interior Schwarz-Christoffel maps, making it easy to experiment with spectra that are not necessarily symmetric about an axis.

  7. Recent ADI iteration analysis and results

    Energy Technology Data Exchange (ETDEWEB)

    Wachspress, E.L.

    1994-12-31

    Some recent ADI iteration analysis and results are discussed. Discovery that the Lyapunov and Sylvester matrix equations are model ADI problems stimulated much research on ADI iteration with complex spectra. The ADI rational Chebyshev analysis parallels the classical linear Chebyshev theory. Two distinct approaches have been applied to these problems. First, parameters which were optimal for real spectra were shown to be nearly optimal for certain families of complex spectra. In the linear case these were spectra bounded by ellipses in the complex plane. In the ADI rational case these were spectra bounded by {open_quotes}elliptic-function regions{close_quotes}. The logarithms of the latter appear like ellipses, and the logarithms of the optimal ADI parameters for these regions are similar to the optimal parameters for linear Chebyshev approximation over superimposed ellipses. W.B. Jordan`s bilinear transformation of real variables to reduce the two-variable problem to one variable was generalized into the complex plane. This was needed for ADI iterative solution of the Sylvester equation.

  8. ITER: Promises unkept ? (2/2)

    CERN Document Server

    CERN. Geneva

    2008-01-01

    Fusion power as the source of energy on Earth has been the dream of mankind ever since the principles were understood. ITER, the Latin word for “the way”, is the world’s largest Fusion device presently under construction in Cadarache, France. Supported by the People’s Republic of China, the European Atomic Energy Community, India, Japan, the Republic of Korea, the Russian Federation, and the United States of America, an international organization was founded after the signature of the Joint ITER Agreement in October of 2006. The goal is to build a Fusion reactor with a power amplification of 10, a total fusion power of 500 MW or more operating at extended burn times of 400-3000 seconds, with Deuterium and Tritium as its basic fuel. Following a short introduction into fusion science principles, the history of thermo nuclear fusion will be covered. Finally more recent construction projects around the world, their latest achievements and the path to ITER will be described. Technological and scientific c...

  9. ITER: Promises unkept ? (1/2)

    CERN Document Server

    CERN. Geneva

    2008-01-01

    Fusion power as the source of energy on Earth has been the dream of mankind ever since the principles were understood. ITER, the Latin word for “the way”, is the world’s largest Fusion device presently under construction in Cadarache, France. Supported by the People’s Republic of China, the European Atomic Energy Community, India, Japan, the Republic of Korea, the Russian Federation, and the United States of America, an international organization was founded after the signature of the Joint ITER Agreement in October of 2006. The goal is to build a Fusion reactor with a power amplification of 10, a total fusion power of 500 MW or more operating at extended burn times of 400-3000 seconds, with Deuterium and Tritium as its basic fuel. Following a short introduction into fusion science principles, the history of thermo nuclear fusion will be covered. Finally more recent construction projects around the world, their latest achievements and the path to ITER will be described. Technological and scientific c...

  10. The dynamics of iterated transportation simulations

    Energy Technology Data Exchange (ETDEWEB)

    Nagel, K.; Rickert, M.; Simon, P.M.

    1998-12-01

    Transportation-related decisions of people often depend on what everybody else is doing. For example, decisions about mode choice, route choice, activity scheduling, etc., can depend on congestion, caused by the aggregated behavior of others. From a conceptual viewpoint, this consistency problem causes a deadlock, since nobody can start planning because they do not know what everybody else is doing. It is the process of iterations that is examined in this paper as a method for solving the problem. In this paper, the authors concentrate on the aspect of the iterative process that is probably the most important one from a practical viewpoint, and that is the ``uniqueness`` or ``robustness`` of the results. Also, they define robustness more in terms of common sense than in terms of a mathematical formalism. For this, they do not only want a single iterative process to converge, but they want the result to be independent of any particular implementation. The authors run many computational experiments, sometimes with variations of the same code, sometimes with totally different code, in order to see if any of the results are robust against these changes.

  11. Iterative solution of the semiconductor device equations

    Energy Technology Data Exchange (ETDEWEB)

    Bova, S.W.; Carey, G.F. [Univ. of Texas, Austin, TX (United States)

    1996-12-31

    Most semiconductor device models can be described by a nonlinear Poisson equation for the electrostatic potential coupled to a system of convection-reaction-diffusion equations for the transport of charge and energy. These equations are typically solved in a decoupled fashion and e.g. Newton`s method is used to obtain the resulting sequences of linear systems. The Poisson problem leads to a symmetric, positive definite system which we solve iteratively using conjugate gradient. The transport equations lead to nonsymmetric, indefinite systems, thereby complicating the selection of an appropriate iterative method. Moreover, their solutions exhibit steep layers and are subject to numerical oscillations and instabilities if standard Galerkin-type discretization strategies are used. In the present study, we use an upwind finite element technique for the transport equations. We also evaluate the performance of different iterative methods for the transport equations and investigate various preconditioners for a few generalized gradient methods. Numerical examples are given for a representative two-dimensional depletion MOSFET.

  12. Atypical situations in root canals anatomy of human mandibular premolars

    Directory of Open Access Journals (Sweden)

    Fabrício SCAINI

    2005-05-01

    Full Text Available The knowledge of the teeth internal anatomy that will receive endodontic treatment is very important for the success of the treatment and prognosis of those teeth. In this study, the morphological variations that may occur in relation to the number of root canals present in the premolar mandibular teeth group were discussed, as well as the most efficient methods to diagnose the existence of these variations, in order to have a clearer diagnosis of the number of root canals to be treated.A case of an endodontic treatment of a mandibular premolar with 4 root canals was reported and some cases of endodontic treatment in mandibular premolars with 1, 2 and 3 root canals were shown.

  13. Functional outcome of surgical management of degenerative lumbar canal stenosis

    Directory of Open Access Journals (Sweden)

    Rajendra Nath

    2012-01-01

    Conclusion: Operative treatment in patients of degenerative lumbar canal stenosis yields excellent results as observed on the basis of JOA scoring system. No patient got recurrence of symptoms of nerve compression.

  14. Optimal volume of local anaesthetic for the adductor canal block

    DEFF Research Database (Denmark)

    Jæger, P.; Jenstrup, M. T.; Lund, J.;

    2015-01-01

    Background: Theoretically, the ideal volume of local anaesthetic for adductor canal block (ACB) would ensure sufficient filling ofthe canal and avoid proximal spread to the femoral triangle. In this dose-finding study, we aimed to investigate the minimaleffective volume for an ACB needed to fill...... the adductor canal distally in at least 95% of patients (ED95). Methods: We performed a blinded trial, enrolling 40 healthy men. All subjects received an ACB with lidocaine 1%. Volumes wereassigned sequentially to the subjects using the continual reassessment method followed by Bayesian analysis to determine...... theED95. Distal filling of the adductor canal was assessed by magnetic resonance imaging (primary outcome). Secondary outcomeswere the effect of volume on proximal spread to the femoral triangle (also assessed by magnetic resonance imaging), quadricepsmuscle weakness (decrease by ≥25% from baseline...

  15. Lipoma causing Guyon's canal syndrome: a case report and review

    Directory of Open Access Journals (Sweden)

    Narayanathu Chellappantilla Sreekumar

    2014-12-01

    Full Text Available Compression of the ulnar nerve in Guyon's canal leads to Guyon's canal syndrome. Lipoma is a rare cause of such compressions with only 12 cases reported previously. We report a 55-year-old man who presented with swelling in the left hand with decreased sensation in the ring and little fingers. Magnetic resonance imaging revealed high signals in T1-weighted and T2-weighted images with suppression of the short T1 inversion recovery signal, suggestive of lipoma. On exploration a well-encapsulated, dumbbell-shaped, fatty tumor was seen in the hypothenar space and Guyon's canal. The tumor was enucleated in toto. At 6-month follow-up, the patient had fully regained sensation. A review of the literature is presented for similar cases where a lipoma was the cause of Guyon's canal syndrome.

  16. Algorithmes et architectures pour ordinateurs quantiques supraconducteurs

    Science.gov (United States)

    Blais, A.

    2003-09-01

    'utilisation de qubits basés sur les jonctions Josephson. On présente entre autres une approche originale pour l'interaction entre qubits. Cette approche est très générale puisqu'elle peut être appliquée à différents designs de qubits. Finalement, on s'intéresse à la lecture des qubits supraconducteurs de flux. Le détecteur suggéré ici a l'avantage de pouvoir être découplé du qubit lorsqu'il n'y a pas de mesure en cours.

  17. Canals in the Roof of the Pharynx :Anatomic Study and their Clinical Meaning

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    1 IntroductionThe palatovaginal canal and the vomerovaginal canal are small canals which connect the roof of the nasopharynx to the posterior wall of the pterygopalatine fossa. The pterygopalatine fossa represents a major pathway for spread of malignant tumors and infections. In most of the classic anatomy texts brief descriptions of the palatovaginal canal and the vomerovaginal canal are provided. There is still a scarcity of studies comparing the radiologic and microdissection findings~([1]). The aim of t...

  18. Evaluation of ITER MSE Viewing Optics

    Energy Technology Data Exchange (ETDEWEB)

    Allen, S; Lerner, S; Morris, K; Jayakumar, J; Holcomb, C; Makowski, M; Latkowski, J; Chipman, R

    2007-03-26

    The Motional Stark Effect (MSE) diagnostic on ITER determines the local plasma current density by measuring the polarization angle of light resulting from the interaction of a high energy neutral heating beam and the tokamak plasma. This light signal has to be transmitted from the edge and core of the plasma to a polarization analyzer located in the port plug. The optical system should either preserve the polarization information, or it should be possible to reliably calibrate any changes induced by the optics. This LLNL Work for Others project for the US ITER Project Office (USIPO) is focused on the design of the viewing optics for both the edge and core MSE systems. Several design constraints were considered, including: image quality, lack of polarization aberrations, ease of construction and cost of mirrors, neutron shielding, and geometric layout in the equatorial port plugs. The edge MSE optics are located in ITER equatorial port 3 and view Heating Beam 5, and the core system is located in equatorial port 1 viewing heating beam 4. The current work is an extension of previous preliminary design work completed by the ITER central team (ITER resources were not available to complete a detailed optimization of this system, and then the MSE was assigned to the US). The optimization of the optical systems at this level was done with the ZEMAX optical ray tracing code. The final LLNL designs decreased the ''blur'' in the optical system by nearly an order of magnitude, and the polarization blur was reduced by a factor of 3. The mirror sizes were reduced with an estimated cost savings of a factor of 3. The throughput of the system was greater than or equal to the previous ITER design. It was found that optical ray tracing was necessary to accurately measure the throughput. Metal mirrors, while they can introduce polarization aberrations, were used close to the plasma because of the anticipated high heat, particle, and neutron loads. These mirrors

  19. CT findings of the osteoma of the external auditory canal

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ha Young; Song, Chang Joon; Yoon, Chung Dae; Park, Mi Hyun; Shin, Byung Seok [Chungnam National University, School of Medicine, Daejeon (Korea, Republic of)

    2006-07-15

    We wanted to report the CT image findings of the osteoma of the external auditory canal. Temporal bone CT scanning was performed on eight patients (4 males and 4 females aged between 8 and 41 years) with pathologically proven osteoma of the external auditory canal after operation, and the findings of the CT scanning were retrospectively reviewed. Not only did we analyze the size, shape, distribution and location of the osteomas, we also analyzed the relationship between the lesion and the tympanosqumaous or tympanomastoid suture line, and the changes seen on the CT scan images for the patients who were able to undergo follow-up. All the lesions of the osteoma of the external auditory canal were unilateral, solitary, pedunculated bony masses. In five patients, the osteomas occurred on the left side and for the other three patients, the osteomas occurred on the right side. The average size of the osteoma was 0.6 cm with the smallest being 0.5 cm and the largest being 1.2 cm. Each of the lesions was located at the osteochondral junction in the terminal part of the osseous external ear canal. The stalk of the osteoma of the external auditory canal was found to have occurred in the anteroinferior wall in five cases (63%), in the anterosuperior wall (the tympanosqumaous suture line) in two cases (25%), and in the anterior wall in one case. The osteoma of the external auditory canal was a compact form in five cases and it was a cancellous form in three cases. One case of the cancellous form was changed into a compact form 35 months later due to the advanced ossification. Osteoma of the external auditory canal developed in a unilateral and solitary fashion. The characteristic image findings show that it is attached to the external auditory canal by its stalk. Unlike our common knowledge about its occurrence, osteoma mostly occurred in the tympanic wall, and this is regardless of the tympanosquamous or tympanomastoid suture line.

  20. Bifid mandibular canal: a rare or underestimated entity?

    Directory of Open Access Journals (Sweden)

    Ibrahim Nasseh

    2016-10-01

    Full Text Available One of the rare anatomical variations that can be of significant importance for the dentist is the bifid mandibular canal. Many complications can occur from this condition such as failure of anesthesia when performing inferior alveolar nerve block, difficulties during the surgical extraction of the third mandibular molar, and during implants placement. Therefore, good knowledge of this condition is essential. In this report, we describe the radiographic finding of a unilateral bifid mandibular canal.

  1. Reformado de presas y canales del Sena inferior

    Directory of Open Access Journals (Sweden)

    Moineau, L.

    1962-03-01

    Full Text Available El programa de reforma y acomodación de las presas y canales existentes en el bajo Sena (Francia acaba de experimentar un nuevo impulso. Este reformado, actualmente en ejecución entre Poissy y N. D. de La Garenne, consiste en la unión de los canales de La Garenne y Port-Villez, de un lado, y de Méricourt y Maulan, de otro.

  2. Rare case of gastrointestinal stromal tumor of the anal canal

    Directory of Open Access Journals (Sweden)

    Madhu Kumar

    2013-01-01

    Full Text Available Gastrointestinal stromal tumor (GIST is a rare mesenchymal neoplasm of the gastrointestinal tract. GIST of anal canal is very rare representing only 3% of all anorectal mesenchymal tumors. We report an extremely rare case of GIST of the anal canal in 60-years-old man with history of irregular bowel habits with dark colored stool mixed with blood and constipation from 6 month. Diagnosis was made on the basis of histomorphological and immunohistochemical examination.

  3. Could spinal canal compression be a cause of polyneuropathy?

    Directory of Open Access Journals (Sweden)

    Richard Bostelmann

    2016-04-01

    Full Text Available Causality between spinal cord compression and polyneuropathy is difficult to define, especially under the circumstances that polyneuropathy can have many causes. Seven patients with spinal cord compression and electrophysiological signs of polyneuropathy were treated surgically on decompression of their spinal canal stenosis in the time from April 2010 to January 2013. Median follow up time was 9 months (2-23 months. Causes of polyneuropathy were: 1 patient with methotrexate-induced polyneuropathy, 1 endocrine-dysfunction-induced, 2 with diabetic- polyneuropathy, and 3 patients had unknown reasons. The localization of the spinal canal stenosis was also varying: 2 patients suffered of cervical spinal canal stenosis and 5 of lumbar. Decompressive surgery led to pain relieve in all patients initially. Surprisingly, also symptoms of polyneuropathy seemed to regress in all 7 patients for the first 5 months after surgery, and in 5 patients for the time of 9 months after surgery. There are two points we would like to emphasize in this short report. Since 5/7 patients with polyneuropathy and spinal canal stenosis improved clinically after surgery, surgery has a place in the treatment of such a combined pathology. Since it seems to be a possible causality between polyneuropathy of unknown origin and spinal cord stenosis, decompression of the spinal canal could also be a therapeutic step in a specific kind of polyneuropathy. Which patients could possibly have a spinal canal stenosis induced polyneuropathy remains a subject of further studies.

  4. Root canal preparation in endodontics: conventional versus laser methods

    Science.gov (United States)

    Goodis, Harold E.; White, Joel M.; Marshall, Sally J.; Marshall, Grayson W.; Moskowitz, Emrey

    1992-06-01

    Conventional cleaning and shaping of root canal systems employs hand and/or rotary instrumentation to remove the contents of the canal and shape the canal to receive a filling material. With the advent of the Nd:YAG laser system another method of accomplishing proper cleaning and shaping is evaluated. Single rooted teeth were radiographed bucco- lingually and mesio-distally and were divided into 2 groups. The first group was accessed and the root canal systems cleaned and shaped with a step back technique utilizing hand files and gates glidden burs. At completion of the procedure the teeth were again radiographed at the same positions as those prior to the procedure. The teeth were split longitudinally and examined under scanning electron microscopy to assess cleaning. The second group of teeth were accessed, and cleaning and shaping was accomplished using the Nd:YAG laser in combination with hand files and rotary instruments. These teeth were subjected to the same analysis as those in the first group. The before and after radiographs of each group were subjected to image analysis to determine effectiveness of the two methods in shaping the canal systems. We will discuss the ability of Nd:YAG to clean and shape root canal spaces and remove smear layer and organic tissue remnants from those areas.

  5. Verrucous Carcinoma in External Auditory Canal – A Rare Case

    Directory of Open Access Journals (Sweden)

    Md Zillur Rahman

    2013-05-01

    Full Text Available Verrucous carcinoma is a variant of squamous cell carcinoma. It is of low grade malignancy and rarely present with distant metastasis. Oral cavity is the commonest site of this tumour, other sites are larynx, oesophagus and genitalia. Verrucous carcinoma in external auditory canal is extremely rare. This is the presentation of a 45 years old woman who came to the ENT & Head Neck Surgery department of Delta medical college, Dhaka, Bangladesh with discharging left ear and impairment of hearing on the same side for 7 years. Otoscopic examination showed a mass occupying almost whole of the external auditory canal and the overlying skin was thickened, papillary and blackish. Cytology from external auditory canal scrap showed hyperkeratosis and parakeratosis. External auditory canal bone was found eroded at some parts. Excision of the mass was done under microscope. Split thickness skin grafting was done in external auditory canal. The mass was diagnosed as verrucous carcinoma on histopathological examination. Afterwards she was given radiotherapy. Six months follow up showed no recurrence and healthy epithelialization of external auditory canal.

  6. Long-term cytotoxic effects of contemporary root canal sealers

    Directory of Open Access Journals (Sweden)

    Emmanuel Joao Nogueira Leal da SILVA

    2013-03-01

    Full Text Available Objectives The aim of the present study was to investigate the effects of root canal sealers on the cytotoxicity of 3T3 fibroblasts during a period of 5 weeks. Material and Methods Fibroblasts (3T3, 1×105 cells per well were incubated with elutes of fresh specimens from eight root canal sealers (AH Plus, Epiphany, Endomethasone N, EndoREZ, MTA Fillapex, Pulp Canal Sealer EWT, RoekoSeal and Sealapex and with elutes of the same specimens for 5 succeeding weeks after immersing in simulated body fluid. The cytotoxicity of all root canal sealers was determined using the MTT assay. Data were analyzed using ANOVA and Tukey's test. Results RoekoSeal was the only sealer that did not show any cytotoxic effects (p<0.05. All the other tested sealers exhibited severe toxicity initially (week 0. MTA Fillapex remained moderately cytotoxic after the end of experimental period. Toxicity of the other tested sealers decreased gradually over time. The evaluated root canal sealers presented varying degrees of cytotoxicity, mainly in fresh mode. Conclusions RoekoSeal had no cytotoxic effect both freshly mixed and in the other tested time points. MTA Fillapex was associated with significantly less cell viability when compared to the other tested root canal sealers.

  7. Computed Tomography Evaluation of Canal Transportation and Volumetric Changes in Root Canal Dentin of Curved Canals Using Mtwo, ProTaper and ProTaper Next Rotary System-An In-vitro Study

    Science.gov (United States)

    Shivashankar, Mayuri Biccodu; Jayasheel, Arun; Kenchanagoudra, Mallikarjun Goud

    2016-01-01

    Introduction Complete cleaning and shaping of root canal system is of paramount importance to achieve a successful root canal treatment. There are various rotary Ni-Ti systems available in the market to achieve mechanical goal of root canal preparation. But aggressive preparation of root canal with such systems would result in canal transportation and excess root dentin removal that would be one of the major reasons to decide the prognosis of root canal treated tooth. Aim The present study was conducted to compare the root canal preparation in terms of canal transportation and volumetric changes in the root canal dentin among three Ni-Ti file systems, namely Mtwo, ProTaper (PT) and ProTaper NEXT (PTN) file system, using Computed Tomography (CT). Materials and Methods A total of 45 mesiobuccal root canals of extracted first molar teeth with completely formed root apices and angle of curvature ranging between 10°- 35° were selected. These teeth were randomly divided into three experimental groups containing 15 teeth each, based on rotary system used. Group-I: Mtwo files, Group-II: PT files and Group-III: PTN files. Pre-instrumentation CT images were obtained at three cross-sectional planes – 3mm, 7mm and 11mm from apical end of the root. Similarly, post-instrumentation images were obtained. Shortest distance from the edge of the canal to the periphery of the root was analyzed by using Analysis of Variance. Results All three file systems tested in the present study presented similar behaviour with respect to the root canal transportation. Lesser canal transportation was recorded in Mtwo. But no statistically significant difference was seen in terms of canal transportation and volume of dentin removed between all three rotary systems (p>0.05). Conclusion Mtwo, PT and PTN rotary systems have similar behaviour with respect to canal transportation and volume of dentin removed. PMID:28050495

  8. Significance of temporal bone CT scan for exposure of the facial canal and the lateral semicircular canal in cholesteatoma

    Energy Technology Data Exchange (ETDEWEB)

    Sung, Ki Joon; Kim, Dong Jin; Kim, Myung Soon; Kim, Young Ju; Kweon, Joon [Wonju College of Medicine, Yonsei University, Wonju (Korea, Republic of)

    1991-09-15

    By reviewing retrospectively the HRCT findings in 130 surgically proven cases of chronic otitis media with cholesteatoma, we estimated the sensitivity, specificity, and positive predictability of the HRCT compared to surgical findings. For exposure of the facial canal, the sensitivity, specificity, and positive predictability was 59.7%, 84.9%, and 85.2% respectively. For exposure of the lateral semicircular canal, the sensitivity was 80.6%, the specificity 99.0%, and the positive predictability 96.2%. Conclusively, the diagnostic accuracy of preoperative temporal bone CT regarding the state of the lateral semicircular canal seems to be highly reliable. Gross invasion of the facial canal can be usually detected. However, relatively low sensitivity suggests that evaluation of the ultra-thin structures of the tympanic segment is often problematic.

  9. Cholesteatoma invasion into the internal auditory canal.

    Science.gov (United States)

    Migirov, Lela; Bendet, Erez; Kronenberg, Jona

    2009-05-01

    Cholesteatoma invasion into the internal auditory canal (IAC) is rare and usually results in irreversible, complete hearing loss and facial paralysis on the affected side. This retrospective study examines the clinical characteristics of seven patients with cholesteatoma invading the IAC, analyzes possible routes of the cholesteatoma's extension and describes the surgical approaches used and patient outcome. Extension to the IAC was via the supralabyrinthine route in most patients. A subtotal petrosectomy, a translabyrinthine approach or a middle cranial fossa approach combined with radical mastoidectomy were required for the complete removal of the cholesteatoma. All seven patients presented with some preoperative facial nerve palsy. The facial nerve was decompressed in four patients and facial nerve repair was performed in three others, two by hypoglossal-facial anastomosis and one by a greater auricular nerve interposition grafting. All patients ended up with total deafness in the operate ear. At 1 year following surgery, the facial nerve function was House-Brackmann grade III in six cases and grade II in one. In conclusion, cholesteatoma invading the IAC is a separate entity with characteristic clinical presentations, require a unique surgical approach, and result in significant morbidity, such as total deafness in the operated ear and impaired facial movement.

  10. Radiotherapy of epidermoid anal canal cancer.

    Science.gov (United States)

    Dobrowsky, W

    1989-01-01

    Forty-eight patients with anal canal cancers were treated with surgery and irradiation or irradiation alone during the period 1970-1982. All cases were treated by external megavoltage equipment. The overall 5-year survival was 50%, and the local recurrence rate 33%. According to the therapy, four major groups were analysed: radical surgery followed by post-operative irradiation (5-year survival 43%, local recurrence rate 38%), incomplete major surgery and post-operative irradiation with very inferior prognosis (none of the patients surviving beyond 52 months). Two groups of patients had sphincter-saving procedures: local surgery followed by irradiation (5-year survival 78%, local recurrence rate 22%) and primary irradiation (5-year survival 57%, local recurrence rate 14%). Lymph node positive patients showed a median survival of 24.5 months against 52 months in N0 cases (5-year survival 21% against 50%). Side-effects of radiotherapy were transient and mild, and no late severe sequelae were seen. The data indicate that post-operative external radiotherapy seems insufficient and unable to decrease the local recurrence rate, especially when surgery is incomplete. Both spincter-saving surgery and radiotherapy, as well as primary irradiation, are effective treatment modalities. These data are analysed and future aspects considering combined radiochemotherapy are discussed.

  11. Retrograde seal in ultrasonically prepared canals.

    Science.gov (United States)

    Sutimuntanakul, S; Worayoskowit, W; Mangkornkarn, C

    2000-08-01

    The sealing ability of various retrofilling materials was compared. The root canals of 85 single-rooted teeth were cleansed and obturated with gutta-percha without sealer using lateral condensation. The apical 3 mm of the roots were resected and divided into positive control, negative control, and five experimental groups. The experimental teeth received root-end cavity preparation to 3 mm depth using an ultrasonic retroprep tip. The retrocavities were dried and divided into five groups to receive the following materials: amalgam with varnish, amalgam with Clearfil Liner Bond II, thermoplasticized gutta-percha (TGP) with sealer, Ketac-fil, and Super-EBA. After immersion in India ink for 7 days, the roots were demineralized, cleared, and evaluated for dye leakage under a stereomicroscope. Statistical analysis showed that Super-EBA, Ketac-fil, and TGP with sealer demonstrated less leakage than amalgam with varnish and amalgam with Clearfil Liner Bond II (p fil or TGP sealer (p fil and TGP or between the two groups filled with amalgam (p > 0.05).

  12. Mejoras en el canal de Panamá

    Directory of Open Access Journals (Sweden)

    Brandl, Charles McG.

    1963-07-01

    Full Text Available The Panama Canal, together with the Suez Canal, is an engineering accomplishment which is now regarded as a master work marking the initiation of modern civil engineering. Other projects, also of great magnitude, do not seem to maintain the reputation of the above two, because they cannot continue to serve their function with sustained usefulness in the new circumstances of today. The Panama Canal, with its limited dock capacity, and the narrow, so called Serpent, canal, has had to cope with a continuously increasing volume of shipping traffic; a natural consequence of commercial evolution. In order to keep up with these increasing demands, it has been necessary to carry out an almost uninterrupted series of modifications and improvements, affecting both the method of operation and organisation, and the actual nature of the canal. Thanks to these alterations the Panama Canal has continued to maintain, at least nominally, an adequate standard of functional efficiency. At present the canal is being widened over certain sections to enable the easy passage of ships of great displacement. The work is being done very rapidly, and in order to gain time, it has been distributed to various contractors simultaneously.El canal a través del ismo de Panamá es una obra de ingeniería civil que, junto con el de Suez, empiezan ya a clasificarse como obras maestras que señalan el primer jalón del desarrollo de la ingeniería moderna. Otras obras, también importantes, no conservan, sin embargo, la misma reputación que aquéllas, por no seguir un paralelismo con las exigencias en cada época. El canal de Panamá, con sus exclusas, y angosto paso llamado de la. Culebra, ha tenido que afrontar un tráfico creciente de navíos que siguen la evolución del tiempo. Para conseguir este paralelismo, tanto el material de explotación como la organización, dragados y mejoras, han tenido que conocer una sucesión ininterrumpida de modificaciones que han permitido

  13. Experimental studies of ITER demonstration discharges

    Science.gov (United States)

    Sips, A. C. C.; Casper, T. A.; Doyle, E. J.; Giruzzi, G.; Gribov, Y.; Hobirk, J.; Hogeweij, G. M. D.; Horton, L. D.; Hubbard, A. E.; Hutchinson, I.; Ide, S.; Isayama, A.; Imbeaux, F.; Jackson, G. L.; Kamada, Y.; Kessel, C.; Kochl, F.; Lomas, P.; Litaudon, X.; Luce, T. C.; Marmar, E.; Mattei, M.; Nunes, I.; Oyama, N.; Parail, V.; Portone, A.; Saibene, G.; Sartori, R.; Stober, J. K.; Suzuki, T.; Wolfe, S. M.; C-Mod Team; ASDEX Upgrade Team; DIII-D Team; JET EFDA Contributors

    2009-08-01

    Key parts of the ITER scenarios are determined by the capability of the proposed poloidal field (PF) coil set. They include the plasma breakdown at low loop voltage, the current rise phase, the performance during the flat top (FT) phase and a ramp down of the plasma. The ITER discharge evolution has been verified in dedicated experiments. New data are obtained from C-Mod, ASDEX Upgrade, DIII-D, JT-60U and JET. Results show that breakdown for Eaxis unassisted (ohmic) for large devices like JET and attainable in devices with a capability of using ECRH assist. For the current ramp up, good control of the plasma inductance is obtained using a full bore plasma shape with early X-point formation. This allows optimization of the flux usage from the PF set. Additional heating keeps li(3) < 0.85 during the ramp up to q95 = 3. A rise phase with an H-mode transition is capable of achieving li(3) < 0.7 at the start of the FT. Operation of the H-mode reference scenario at q95 ~ 3 and the hybrid scenario at q95 = 4-4.5 during the FT phase is documented, providing data for the li (3) evolution after the H-mode transition and the li (3) evolution after a back-transition to L-mode. During the ITER ramp down it is important to remain diverted and to reduce the elongation. The inductance could be kept <=1.2 during the first half of the current decay, using a slow Ip ramp down, but still consuming flux from the transformer. Alternatively, the discharges can be kept in H-mode during most of the ramp down, requiring significant amounts of additional heating.

  14. Evaluating ITER remote handling middleware concepts

    Energy Technology Data Exchange (ETDEWEB)

    Koning, J.F., E-mail: j.f.koning@differ.nl [FOM Institute DIFFER, Association EURATOM-FOM, Partner in the Trilateral Euregio Cluster and ITER-NL, PO Box 1207, 3430 BE Nieuwegein (Netherlands); Heemskerk, C.J.M.; Schoen, P.; Smedinga, D. [Heemskerk Innovative Technology, Noordwijk (Netherlands); Boode, A.H. [University of Applied Sciences InHolland, Alkmaar (Netherlands); Hamilton, D.T. [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France)

    2013-10-15

    Highlights: ► Remote Handling Study Centre: middleware system setup and modules built. ► Aligning to ITER RH Control System Layout: prototype of database, VR and simulator. ► OpenSplice DDS, ZeroC ICE messaging and object oriented middlewares reviewed. ► Windows network latency found problematic for semi-realtime control over the network. -- Abstract: Remote maintenance activities in ITER will be performed by a unique set of hardware systems, supported by an extensive software kit. A layer of middleware will manage and control a complex set of interconnections between teams of operators, hardware devices in various operating theatres, and databases managing tool and task logistics. The middleware is driven by constraints on amounts and timing of data like real-time control loops, camera images, and database access. The Remote Handling Study Centre (RHSC), located at FOM institute DIFFER, has a 4-operator work cell in an ITER relevant RH Control Room setup which connects to a virtual hot cell back-end. The centre is developing and testing flexible integration of the Control Room components, resulting in proof-of-concept tests of this middleware layer. SW components studied include generic human-machine interface software, a prototype of a RH operations management system, and a distributed virtual reality system supporting multi-screen, multi-actor, and multiple independent views. Real-time rigid body dynamics and contact interaction simulation software supports simulation of structural deformation, “augmented reality” operations and operator training. The paper presents generic requirements and conceptual design of middleware components and Operations Management System in the context of a RH Control Room work cell. The simulation software is analyzed for real-time performance and it is argued that it is critical for middleware to have complete control over the physical network to be able to guarantee bandwidth and latency to the components.

  15. Corneal topography matching by iterative registration.

    Science.gov (United States)

    Wang, Junjie; Elsheikh, Ahmed; Davey, Pinakin G; Wang, Weizhuo; Bao, Fangjun; Mottershead, John E

    2014-11-01

    Videokeratography is used for the measurement of corneal topography in overlapping portions (or maps) which must later be joined together to form the overall topography of the cornea. The separate portions are measured from different viewpoints and therefore must be brought together by registration of measurement points in the regions of overlap. The central map is generally the most accurate, but all maps are measured with uncertainty that increases towards the periphery. It becomes the reference (or static) map, and the peripheral (or dynamic) maps must then be transformed by rotation and translation so that the overlapping portions are matched. The process known as registration, of determining the necessary transformation, is a well-understood procedure in image analysis and has been applied in several areas of science and engineering. In this article, direct search optimisation using the Nelder-Mead algorithm and several variants of the iterative closest/corresponding point routine are explained and applied to simulated and real clinical data. The measurement points on the static and dynamic maps are generally different so that it becomes necessary to interpolate, which is done using a truncated series of Zernike polynomials. The point-to-plane iterative closest/corresponding point variant has the advantage of releasing certain optimisation constraints that lead to persistent registration and alignment errors when other approaches are used. The point-to-plane iterative closest/corresponding point routine is found to be robust to measurement noise, insensitive to starting values of the transformation parameters and produces high-quality results when using real clinical data.

  16. Adaptable Iterative and Recursive Kalman Filter Schemes

    Science.gov (United States)

    Zanetti, Renato

    2014-01-01

    Nonlinear filters are often very computationally expensive and usually not suitable for real-time applications. Real-time navigation algorithms are typically based on linear estimators, such as the extended Kalman filter (EKF) and, to a much lesser extent, the unscented Kalman filter. The Iterated Kalman filter (IKF) and the Recursive Update Filter (RUF) are two algorithms that reduce the consequences of the linearization assumption of the EKF by performing N updates for each new measurement, where N is the number of recursions, a tuning parameter. This paper introduces an adaptable RUF algorithm to calculate N on the go, a similar technique can be used for the IKF as well.

  17. Iterative approach for the eigenvalue problems

    Indian Academy of Sciences (India)

    J Datta; P K Bera

    2011-01-01

    An approximation method based on the iterative technique is developed within the framework of linear delta expansion (LDE) technique for the eigenvalues and eigenfunctions of the one-dimensional and three-dimensional realistic physical problems. This technique allows us to obtain the coefficient in the perturbation series for the eigenfunctions and the eigenvalues directly by knowing the eigenfunctions and the eigenvalues of the unperturbed problems in quantum mechanics. Examples are presented to support this. Hence, the LDE technique can be used for non-perturbative as well as perturbative systems to find approximate solutions of eigenvalue problems.

  18. Iterative Regularization with Minimum-Residual Methods

    DEFF Research Database (Denmark)

    Jensen, Toke Koldborg; Hansen, Per Christian

    2007-01-01

    We study the regularization properties of iterative minimum-residual methods applied to discrete ill-posed problems. In these methods, the projection onto the underlying Krylov subspace acts as a regularizer, and the emphasis of this work is on the role played by the basis vectors of these Krylov...... subspaces. We provide a combination of theory and numerical examples, and our analysis confirms the experience that MINRES and MR-II can work as general regularization methods. We also demonstrate theoretically and experimentally that the same is not true, in general, for GMRES and RRGMRES their success...... as regularization methods is highly problem dependent....

  19. Blind iterative deconvolution of binary star images

    CERN Document Server

    Saha, S K

    1997-01-01

    The technique of Blind Iterative De-convolution (BID) was used to remove the atmospherically induced point spread function (PSF) from short exposure images of two binary stars, HR 5138 and HR 5747 obtained at the cassegrain focus of the 2.34 meter Vainu Bappu Telescope(VBT), situated at Vainu Bappu Observatory (VBO), Kavalur. The position angles and separations of the binary components were seen to be consistent with results of the auto-correlation technique, while the Fourier phases of the reconstructed images were consistent with published observations of the binary orbits.

  20. Iterative regularization with minimum-residual methods

    DEFF Research Database (Denmark)

    Jensen, Toke Koldborg; Hansen, Per Christian

    2006-01-01

    We study the regularization properties of iterative minimum-residual methods applied to discrete ill-posed problems. In these methods, the projection onto the underlying Krylov subspace acts as a regularizer, and the emphasis of this work is on the role played by the basis vectors of these Krylov...... subspaces. We provide a combination of theory and numerical examples, and our analysis confirms the experience that MINRES and MR-II can work as general regularization methods. We also demonstrate theoretically and experimentally that the same is not true, in general, for GMRES and RRGMRES - their success...... as regularization methods is highly problem dependent....

  1. Recent Advances in Iterative Learning Control

    Institute of Scientific and Technical Information of China (English)

    Jian-Xin XU

    2005-01-01

    In this paper we review the recent advances in three sub-areas of iterative learning control (ILC): 1) linear ILC for linear processes, 2) linear ILC for nonlinear processes which are global Lipschitz continuous (GLC), and 3) nonlinear ILC for general nonlinear processes. For linear processes, we focus on several basic configurations of linear ILC. For nonlinear processes with linear ILC, we concentrate on the design and transient analysis which were overlooked and missing for a long period. For general classes of nonlinear processes, we demonstrate nonlinear ILC methods based on Lyapunov theory, which is evolving into a new control paradigm.

  2. A note on how to iterate adjustment

    Energy Technology Data Exchange (ETDEWEB)

    Wagschal, Jehudah J.; Yeivin, Yehuda [Hebrew University of Jerusalem, Racah Institute of Physics, Jerusalem (Israel)

    2002-08-01

    We study the elementary problem of adjusting a given parameter library by one measured response so that calculating the response with the adjusted library reproduces the measured value. We formulate the problem of the least-squares adjustment for non-linear responses, and offer a reasoned iteration scheme to solve it. A numerical example illustrates the success of the proposed procedure. Our scheme is identical to that suggested by Perey, and thus adds insight, offers justification, and also serves as a formal proof of the latter. (author)

  3. Random iteration with place dependent probabilities

    CERN Document Server

    Kapica, R

    2011-01-01

    Markov chains arising from random iteration of functions $S_{\\theta}:X\\to X$, $\\theta \\in \\Theta$, where $X$ is a Polish space and $\\Theta$ is arbitrary set of indices are considerd. At $x\\in X$, $\\theta$ is sampled from distribution $\\theta_x$ on $\\Theta$ and $\\theta_x$ are different for different $x$. Exponential convergence to a unique invariant measure is proved. This result is applied to case of random affine transformations on ${\\mathbb R}^d$ giving existence of exponentially attractive perpetuities with place dependent probabilities.

  4. Assessment of the wetting behavior of three different root canal sealers on root canal dentin

    Directory of Open Access Journals (Sweden)

    Muralidhar Tummala

    2012-01-01

    Full Text Available Aim: The objective of the present study was to evaluate and compare the wetting behavior of three different root canal sealers on the root canal dentin surface treated with irrigants and their combination. Materials and Methods: Decoronation and apical third resections of 27 extracted single-rooted human mandibular premolars were done. The roots were then split longitudinally into two halves, and randomly assigned into three treatment groups (n=18. The root dentin surfaces in Group1, Group 2 and Group 3 were treated with 17% ethylene diamine tetra acetic acid (EDTA, 3% sodium hypochlorite (NaOCl and combination of 17% EDTA and 3% NaOCl, respectively. Each group was subdivided into three subgroups of 6 specimens each, depending on the the sealer used, i.e. sub group A. zinc oxide (ZnOE, sub group B. AH plus, subgroup C. Guttaflow sealer, respectively. The contact angle was measured using First Ten Angstroms (FTA 200 dynamic contact angle analyzer. Results: The contact angle values for AH Plus sealer were significantly lower when compared to the other two sealer groups. Conclusion: The wettability of AH Plus sealer on the root surface dentin was found to be better than Gutta-Flow and ZnOE sealer.

  5. iHadoop: Asynchronous Iterations Support for MapReduce

    KAUST Repository

    Elnikety, Eslam

    2011-08-01

    MapReduce is a distributed programming framework designed to ease the development of scalable data-intensive applications for large clusters of commodity machines. Most machine learning and data mining applications involve iterative computations over large datasets, such as the Web hyperlink structures and social network graphs. Yet, the MapReduce model does not efficiently support this important class of applications. The architecture of MapReduce, most critically its dataflow techniques and task scheduling, is completely unaware of the nature of iterative applications; tasks are scheduled according to a policy that optimizes the execution for a single iteration which wastes bandwidth, I/O, and CPU cycles when compared with an optimal execution for a consecutive set of iterations. This work presents iHadoop, a modified MapReduce model, and an associated implementation, optimized for iterative computations. The iHadoop model schedules iterations asynchronously. It connects the output of one iteration to the next, allowing both to process their data concurrently. iHadoop\\'s task scheduler exploits inter- iteration data locality by scheduling tasks that exhibit a producer/consumer relation on the same physical machine allowing a fast local data transfer. For those iterative applications that require satisfying certain criteria before termination, iHadoop runs the check concurrently during the execution of the subsequent iteration to further reduce the application\\'s latency. This thesis also describes our implementation of the iHadoop model, and evaluates its performance against Hadoop, the widely used open source implementation of MapReduce. Experiments using different data analysis applications over real-world and synthetic datasets show that iHadoop performs better than Hadoop for iterative algorithms, reducing execution time of iterative applications by 25% on average. Furthermore, integrating iHadoop with HaLoop, a variant Hadoop implementation that caches

  6. Cervical spinal canal narrowing and cervical neurologi-cal injuries

    Directory of Open Access Journals (Sweden)

    ZHANG Ling

    2012-04-01

    Full Text Available 【Abstract】Cervical spinal canal narrowing can lead to injury of the spinal cord and neurological symptoms in-cluding neck pain, headache, weakness and parasthesisas. According to previous and recent clinical researches, we investigated the geometric parameters of normal cervical spinal canal including the sagittal and transverse diameters as well as Torg ratio. The mean sagittal diameter of cervical spinal canal at C 1 to C 7 ranges from 15.33 mm to 20.46 mm, the mean transverse diameter at the same levels ranges from 24.45 mm to 27.00 mm and the mean value of Torg ratio is 0.96. With respect to narrow cervical spinal canal, the following charaterstics are found: firstly, extension of the cervical spine results in statistically significant stenosis as compared with the flexed or neutral positions; secondly, females sustain cervical spinal canal narrowing more easily than males; finally, the consistent narrowest cervical canal level is at C 4 for all ethnicity, but there is a slight variation in the sagittal diameter of cervical spinal stenosis (≤14 mm in Whites, ≤ 12 mm in Japanese, ≤13.7 mm in Chinese. Narrow sagittal cervical canal diameter brings about an increased risk of neurological injuries in traumatic, degenerative and inflam-matory conditions and is related with extension of cervical spine, gender, as well as ethnicity. It is hoped that this re-view will be helpful in diagnosing spinal cord and neuro-logical injuries with the geometric parameters of cervical spine in the future. Key words: Spinal cord injuries; Spinal stenosis; Trauma, nervous system

  7. Cervical spinal canal narrowing and cervical neurological injuries

    Institute of Scientific and Technical Information of China (English)

    ZHANG Ling; CHEN Hai-bin; WANG Yi; ZHANG Li-ying; LIU Jing-cheng; WANG Zheng-guo

    2012-01-01

    Cervical spinal canal narrowing can lead to injury of the spinal cord and neurological symptoms including neck pain,headache,weakness and parasthesisas.According to previous and recent clinical researches,we investigated the geometric parameters of normal cervical spinal canal including the sagittal and transverse diameters as well as Torg ratio.The mean sagittal diameter of cervical spinal canal at C1 to C7 ranges from 15.33 mm to 20.46 mm,the mean transverse diameter at the same levels ranges from 24.45 mm to 27.00 mm and the mean value of Torg ratio is 0.96.With respect to narrow cervical spinal canal,the following charaterstics are found:firstly,extension of the cervical spine results in statistically significant stenosis as compared with the flexed or neutral positions; secondly,females sustain cervical spinal canal narrowing more easily than males;finally,the consistent narrowest cervical canal level is at C4 for all ethnicity,but there is a slight variation in the sagittal diameter of cervical spinal stenosis(≤ 14 mm in Whites,≤12 mm in Japanese,≤ 13.7 mm in Chinese).Narrow sagittal cervical canal diameter brings about an increased risk of neurological injuries in traumatic,degenerative and inflammatory conditions and is related with extension of cervical spine,gender,as well as ethnicity.It is hoped that this review will be helpful in diagnosing spinal cord and neurological injuries with the geometric parameters of cervical spine in the future.

  8. Topographical evaluation of the mandibular canal through panoramic radiograph

    Directory of Open Access Journals (Sweden)

    Ingrid Macedo Oliveira

    2016-10-01

    Full Text Available The mandibular canal is located inside the body of the mandible and may have anatomical variations. The topographic knowledge of the mandibular canal by the Dental surgeons is fundamental to achieving success in surgical planning, anesthetics and clinical interventions involving the jaw. To study the anatomy of the mandibular canal through panoramic radiographs. A retrospective descriptive study, developed after review and approval by the Ethics and Research Committee with the number of opinion 431095. Were analyzed 252 panoramic radiographs of patients of male and female attended in dental clinics UNINOVAFAPI University Center, Teresina-Pi, Brazil. The radiographs were analyzed with the aid of a light box and each antimere the jaw was observed separately. The classification of Nortjé and Langlais for description of the topography of the mandibular canal were used. Descriptive statistical analysis was performed with SPSS version 18.0. There was a prevalence of 38.89% in both antimeres, of mandibular channel the Type II. The type IV was present in 25.4% in the right hemi-arch and 26.6% on the left. Mandibular canal with unilateral bifurcation was observed in 0.77% of the sample and molar straight channel has not been identified. We observed anatomical variations as for the number and path, of the mandibular canal with the highest prevalence of Types II and IV, and the absence of bifurcations. Most was mandibular channels showed no bifurcation. The panoramic radiograph showed up an aid important to identify the mandibular canal and its variations.

  9. ITER power electrical networks; Sistemas electricos de alimentacion a los consumidores del ITER

    Energy Technology Data Exchange (ETDEWEB)

    Sejas Portela, S.

    2011-07-01

    The ITER project (International Thermonuclear Experimental Reactor) is an international effort to research and development to design, build and operate an experimental facility to demonstrate the scientific and technological possibility of obtaining useful energy from the physical phenomenon known as nuclear fusion.

  10. Iterative reconstruction of volumetric particle distribution

    Science.gov (United States)

    Wieneke, Bernhard

    2013-02-01

    For tracking the motion of illuminated particles in space and time several volumetric flow measurement techniques are available like 3D-particle tracking velocimetry (3D-PTV) recording images from typically three to four viewing directions. For higher seeding densities and the same experimental setup, tomographic PIV (Tomo-PIV) reconstructs voxel intensities using an iterative tomographic reconstruction algorithm (e.g. multiplicative algebraic reconstruction technique, MART) followed by cross-correlation of sub-volumes computing instantaneous 3D flow fields on a regular grid. A novel hybrid algorithm is proposed here that similar to MART iteratively reconstructs 3D-particle locations by comparing the recorded images with the projections calculated from the particle distribution in the volume. But like 3D-PTV, particles are represented by 3D-positions instead of voxel-based intensity blobs as in MART. Detailed knowledge of the optical transfer function and the particle image shape is mandatory, which may differ for different positions in the volume and for each camera. Using synthetic data it is shown that this method is capable of reconstructing densely seeded flows up to about 0.05 ppp with similar accuracy as Tomo-PIV. Finally the method is validated with experimental data.

  11. Laser cleaning of ITER's diagnostic mirrors

    Science.gov (United States)

    Skinner, C. H.; Gentile, C. A.; Doerner, R.

    2012-10-01

    Practical methods to clean ITER's diagnostic mirrors and restore reflectivity will be critical to ITER's plasma operations. We report on laser cleaning of single crystal molybdenum mirrors coated with either carbon or beryllium films 150 - 420 nm thick. A 1.06 μm Nd laser system provided 220 ns pulses at 8 kHz with typical power densities of 1-2 J/cm^2. The laser beam was fiber optically coupled to a scanner suitable for tokamak applications. The efficacy of mirror cleaning was assessed with a new technique that combines microscopic imaging and reflectivity measurements [1]. The method is suitable for hazardous materials such as beryllium as the mirrors remain sealed in a vacuum chamber. Excellent restoration of reflectivity for the carbon coated Mo mirrors was observed after laser scanning under vacuum conditions. For the beryllium coated mirrors restoration of reflectivity has so far been incomplete and modeling indicates that a shorter duration laser pulse is needed. No damage of the molybdenum mirror substrates was observed.[4pt][1] C.H. Skinner et al., Rev. Sci. Instrum. at press.

  12. The ITER Radial Neutron Camera Detection System

    Science.gov (United States)

    Marocco, D.; Belli, F.; Bonheure, G.; Esposito, B.; Kaschuck, Y.; Petrizzi, L.; Riva, M.

    2008-03-01

    A multichannel neutron detection system (Radial Neutron Camera, RNC) will be installed on the ITER equatorial port plug 1 for total neutron source strength, neutron emissivity/ion temperature profiles and nt/nd ratio measurements [1]. The system is composed by two fan shaped collimating structures: an ex-vessel structure, looking at the plasma core, containing tree sets of 12 collimators (each set lying on a different toroidal plane), and an in-vessel structure, containing 9 collimators, for plasma edge coverage. The RNC detecting system will work in a harsh environment (neutron fiux up to 108-109 n/cm2 s, magnetic field >0.5 T or in-vessel detectors), should provide both counting and spectrometric information and should be flexible enough to cover the high neutron flux dynamic range expected during the different ITER operation phases. ENEA has been involved in several activities related to RNC design and optimization [2,3]. In the present paper the up-to-date design and the neutron emissivity reconstruction capabilities of the RNC will be described. Different options for detectors suitable for spectrometry and counting (e.g. scintillators and diamonds) focusing on the implications in terms of overall RNC performance will be discussed. The increase of the RNC capabilities offered by the use of new digital data acquisition systems will be also addressed.

  13. Fusion Neutron Flux Monitor for ITER

    Institute of Scientific and Technical Information of China (English)

    YANG Jinwei; YANG Qingwei; XIAO Gongshan; ZHANG Wei; SONG Xianying; LI Xu

    2008-01-01

    Neutron flux monitor (NFM) as an important diagnostic sub-system in ITER (international thermonuclear experimental reactor) provides a global neutron source intensity, fusion power and neutron flux in real time. Three types of neutron flux monitor assemblies with different sensitivities and shielding materials have been designed. Through MCNP (Mante-Carlo neutral particle transport code) calculations, this extended system of NFM can detect the neutron flux in a range of 104 n/(cm2·s) to 1014 n/(cm2·s). It is capable of providing accurate neutron yield measurements for all operational modes encountered in the ITER experiments including the in-situ calibration. Combining both the counting mode and Campbelling (MSV; Mean Square Voltage) mode in the signal processing units, the requirement of the dynamic range (107) for these NFMs and time resolution (1 ms) can be met. Based on a uncertainty analysis, the estimated absolute measurement accuracies of the total fusion neutron yield can reach the required 10% level in both the early stage of the DD-phase and the full power DT operation mode. In the advanced DD-phase, the absolute measurement accuracy would be better than 20%.

  14. Toward a LHCD system for ITER

    Energy Technology Data Exchange (ETDEWEB)

    Bibet, Ph. [Association Euratom-CEA, CEA/DSM/DRFC, Centre de Cadarache, 13108 St. Paul lez Durance (France)]. E-mail: philippe.bibet@cea.fr; Beaumont, B. [Association Euratom-CEA, CEA/DSM/DRFC, Centre de Cadarache, 13108 St. Paul lez Durance (France); Belo, J.H. [Centro de Fusao Nuclear, Associacao Euratom-IST, Instituto Superior Tecnico, 1049-001 Lisbon (Portugal); Delpech, L. [Association Euratom-CEA, CEA/DSM/DRFC, Centre de Cadarache, 13108 St. Paul lez Durance (France); Ekedahl, A. [Association Euratom-CEA, CEA/DSM/DRFC, Centre de Cadarache, 13108 St. Paul lez Durance (France); Granucci, G. [Associazione Euratom-ENEA sulla Fusione, IFP-CNR, via R. Cozzi, 53-20125 Milan (Italy); Kazarian, F. [Association Euratom-CEA, CEA/DSM/DRFC, Centre de Cadarache, 13108 St. Paul lez Durance (France); Litaudon, X. [Association Euratom-CEA, CEA/DSM/DRFC, Centre de Cadarache, 13108 St. Paul lez Durance (France); Mailloux, J. [Euratom/UKAEA Fusion Association, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Mirizzi, F. [Associazione Euratom-ENEA sulla Fusione, CR Frascati, C.P. 65, 00044 Frascati, Rome (Italy); Pericoli, V. [Associazione Euratom-ENEA sulla Fusione, CR Frascati, C.P. 65, 00044 Frascati, Rome (Italy); Prou, M. [Association Euratom-CEA, CEA/DSM/DRFC, Centre de Cadarache, 13108 St. Paul lez Durance (France); Rantamaeki, K. [Association Euratom-Tekes, VTT Processes, P.O. Box 1608, FIN-02044 VTT (Finland); Tuccillo, A. [Associazione Euratom-ENEA sulla Fusione, CR Frascati, C.P. 65, 00044 Frascati, Rome (Italy)

    2005-11-15

    On ITER, the LH system aims at supplying 20 MW CW for controlling the q-profiles in partially and fully non-inductive steady-state operation (9 MA). The designed LH system relies on a transmitter made of 24 5 GHz 1 MW klystrons linked to one antenna based on the passive active multijunction (PAM) concept, via a 60 m long oversized circular transmission line. Through a common European effort including several associations (CEA, ENEA, UKAEA, IST, TEKES and IPP-CZ) many outstanding problems have been solved: coupling has been achieved on JET in a physics scenario similar to ITER, a PAM has been tested with success on the FTU plasma. The reliability of LH for long pulse operation has been ascertained on Tore Supra. In order to routinely realise long pulse operation (1000 s), the Tore Supra LH system is being refurbished within the CIMES project framework where the transmitter is to be equipped with 16 klystrons 700 kW 1000 s at a frequency of 3.7 GHz. A new LH launcher based upon the PAM concept has been studied, designed and is actually under realisation.

  15. Comparison of Iterative Feedback Tuning Search Techniques

    Institute of Scientific and Technical Information of China (English)

    Graham E. A.; Xie S. Q.; Gamage P.

    2006-01-01

    Iterative feedback tuning is an attractive method for industry as it is a model free approach using experiments conducted on the plant to tune controller parameters. Classically Gauss-Newton iterative methods are used in IFT to update the controller parameters in the negative gradient direction of a specified design criterion function. Levenburg-Marquardt and Trust-Region strategies offer attractive advantages to Gauss-Newton in many applications, these alternative methods are given and results from simulation presented. A discussion on the differences between line search methods and Trust-Region methods is given showing the Trust-Region search direction is more flexible. Step size selection is often the limiting factor and it is found that with unknown step size values and initial controller parameters the Trust-Region is the best selection, where as if overshoot is a concern Levenburg-Marquardt is a good choice.Gauss-Newton method provides quick convergence and a fast response time however it shows more dependence on the step size.

  16. ITER prototype fast plant system controller

    Energy Technology Data Exchange (ETDEWEB)

    Goncalves, B., E-mail: bruno@ipfn.ist.utl.pt [Instituto de Plasmas e Fusao Nuclear - Laboratorio Associado, Instituto Superior Tecnico, P-1049-001 Lisboa (Portugal); Sousa, J.; Carvalho, B.B.; Rodrigues, A.P.; Correia, M.; Batista, A. [Instituto de Plasmas e Fusao Nuclear - Laboratorio Associado, Instituto Superior Tecnico, P-1049-001 Lisboa (Portugal); Vega, J. [Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas, CIEMAT, Av. Complutense, Madrid (Spain); Ruiz, M.; Lopez, J.M. [Grupo de Investigacion en Instrumentacion y Acustica Aplicada, Universidad Politecnica de Madrid (Spain); Castro, R. [Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas, CIEMAT, Av. Complutense, Madrid (Spain); Wallander, A.; Utzel, N.; Makijarvi, P.; Simrock, S. [ITER Organization, CS 90 046, 13067 St. Paul lez Durance Cedex (France); Neto, A.; Alves, D.; Valcarcel, D.F. [Instituto de Plasmas e Fusao Nuclear - Laboratorio Associado, Instituto Superior Tecnico, P-1049-001 Lisboa (Portugal); Lousa, P.; Piedade, F.; Fernandes, L. [INOV, Lisbon (Portugal)

    2011-10-15

    ITER CODAC Design identified the need for slow and fast control plant systems, based respectively on industrial automation technology with maximum sampling rates below 100 Hz, and on embedded technology with higher sampling rates and more stringent real-time requirements. The fast system is applicable to diagnostics and plant systems in closed-control loops whose cycle times are below 1 ms. Fast controllers will be dedicated industrial controllers with the ability to supervise other fast and/or slow controllers, interface to actuators and sensors and high performance networks (HPN). This contribution presents the engineering design of two prototypes of a fast plant system controller (FPSC), specialized for data acquisition, constrained by ITER technological choices. This prototyping activity contributes to the Plant Control Design Handbook (PCDH) effort of standardization, specifically regarding fast controller characteristics. The prototypes will be built using two different form factors, PXIe and ATCA, with the aim of comparing the implementations. The presented solution took into consideration channel density, synchronization, resolution, sampling rates and the needs for signal conditioning such as filtering and galvanic isolation. The integration of the two controllers in the standard CODAC environment is also presented and discussed. Both controllers contain an EPICS IOC providing the interface to the mini-CODAC which will be used for all testing activities. The alpha version of the FPSC is also presented.

  17. Compressed Sensing via Iterative Support Detection

    CERN Document Server

    Wang, Yilun

    2009-01-01

    We present a new compressive sensing reconstruction method "ISD". ISD addresses failed cases of L1-based construction due to insufficient measurements. ISD will learn from wrong solutions and come up with new minimization problems that return signals that are either correct or better. Specifically, from an incorrect signal ISD detects an index set I that includes components most likely to be true nonzeros, obtains a new signal x by solving min{sum_{i not in I} |x_i| : Ax = b}, and repeats such support detection and minimization using latest x and I from one another until convergence. We introduce an efficient implementation of ISD, called threshold-ISD, for recovering signals with fast decaying distributions of nonzeros from compressive measurements. Numerical experiments show that threshold-ISD has significant overall advantages over the classical L1 minimization approach, as well as two other state-of-the-art algorithms such as the iterative reweighted L1 minimization algorithm (IRL1) and the iterative rewe...

  18. Diverse Power Iteration Embeddings and Its Applications

    Energy Technology Data Exchange (ETDEWEB)

    Huang H.; Yoo S.; Yu, D.; Qin, H.

    2014-12-14

    Abstract—Spectral Embedding is one of the most effective dimension reduction algorithms in data mining. However, its computation complexity has to be mitigated in order to apply it for real-world large scale data analysis. Many researches have been focusing on developing approximate spectral embeddings which are more efficient, but meanwhile far less effective. This paper proposes Diverse Power Iteration Embeddings (DPIE), which not only retains the similar efficiency of power iteration methods but also produces a series of diverse and more effective embedding vectors. We test this novel method by applying it to various data mining applications (e.g. clustering, anomaly detection and feature selection) and evaluating their performance improvements. The experimental results show our proposed DPIE is more effective than popular spectral approximation methods, and obtains the similar quality of classic spectral embedding derived from eigen-decompositions. Moreover it is extremely fast on big data applications. For example in terms of clustering result, DPIE achieves as good as 95% of classic spectral clustering on the complex datasets but 4000+ times faster in limited memory environment.

  19. Canal mandibular bífido: Presentación de una serie de casos Bifid mandibular canal: Case series report

    OpenAIRE

    C.L. Guzmán Zuluaga; I.C. Guzmán Zuluaga; C.M. Ardila Medina

    2012-01-01

    La ubicación y configuración de las variaciones del canal mandibular son relevantes en diferentes procedimientos clínicos de la mandíbula. En esta serie de casos un radiólogo evaluó el recorrido del canal mandibular identificando la presencia y tipos de canales bífidos. Se observaron cuatro pacientes con canal mandibular bífido tipo retromolar y tres sujetos con canal bífido tipo anterior sin convergencia. En otro paciente se encontraron forámenes dentarios bífidos bilaterales. La Tomografía ...

  20. Convergence results on iteration algorithms to linear systems.

    Science.gov (United States)

    Wang, Zhuande; Yang, Chuansheng; Yuan, Yubo

    2014-01-01

    In order to solve the large scale linear systems, backward and Jacobi iteration algorithms are employed. The convergence is the most important issue. In this paper, a unified backward iterative matrix is proposed. It shows that some well-known iterative algorithms can be deduced with it. The most important result is that the convergence results have been proved. Firstly, the spectral radius of the Jacobi iterative matrix is positive and the one of backward iterative matrix is strongly positive (lager than a positive constant). Secondly, the mentioned two iterations have the same convergence results (convergence or divergence simultaneously). Finally, some numerical experiments show that the proposed algorithms are correct and have the merit of backward methods.

  1. Iterative coupling reservoir simulation on high performance computers

    Institute of Scientific and Technical Information of China (English)

    Lu Bo; Wheeler Mary F

    2009-01-01

    In this paper, the iterative coupling approach is proposed for applications to solving multiphase flow equation systems in reservoir simulation, as it provides a more flexible time-stepping strategy than existing approaches. The iterative method decouples the whole equation systems into pressure and saturation/concentration equations, and then solves them in sequence, implicitly and semi-implicitly. At each time step, a series of iterations are computed, which involve solving linearized equations using specific tolerances that are iteration dependent. Following convergence of subproblems, material balance is checked. Convergence of time steps is based on material balance errors. Key components of the iterative method include phase scaling for deriving a pressure equation and use of several advanced numerical techniques. The iterative model is implemented for parallel computing platforms and shows high parallel efficiency and scalability.

  2. Optimisation conjointe source/canal d'une transmission vidéo H.264/AVC sur un lien sans fil

    OpenAIRE

    Bergeron, Cyril

    2007-01-01

    Dans le domaine des transmissions de données multimédia, de remarquables progrès ont été fait au cours des vingt dernières années permettant d'optimiser chaque module d'une chaîne de communication moderne. Mais en dépit de ces excellents résultats, une approche cloisonnée ou "séparée" a montré ses limites dans le cas des communications sans fil. Notre approche, qui suit celle du codage source/canal conjoint, a pour objectif de développer des stratégies où le codage de source et le codage cana...

  3. Origin and evolution of the canal raphe system in diatoms.

    Science.gov (United States)

    Ruck, Elizabeth C; Theriot, Edward C

    2011-11-01

    One lineage of pennate diatoms has a slit through the siliceous cell wall, called a "raphe," that functions in motility. Raphid pennate diatoms number in the perhaps tens of thousands of species, with the diversity of raphe forms potentially matching this number. Three lineages-the Bacillariales, Rhopalodiales, and Surirellales-possess a complex and presumably highly derived raphe that is physically separated from the cell interior, most often by a set of siliceous braces. Because the relationship among these three lineages is unclear, the number of origins of the canal raphe system and the homology of it and its constitutive parts among these lineages, is equally unclear. We reconstructed the phylogeny of raphid pennate diatoms and included, for the first time, members of all three canal raphid diatom lineages, and used the phylogeny to test specific hypotheses about the origin of the canal raphe. The canal raphe appears to have evolved twice, once in the common ancestor of Bacillariales and once in the common ancestor of Rhopalodiales and Surirellales, which form a monophyletic group in our analyses. These results recommend careful follow-up morphogenesis studies of the canal raphe in these two lineages to determine the underlying developmental basis for this remarkable case of parallel evolution.

  4. [Anatomical names of foramina and canales in skeleton].

    Science.gov (United States)

    Shikano, S; Yamashita, Y

    1998-03-01

    Latin anatomical names of Foramina and Canales in skeleton were analyzed and compared with Japanese anatomical names for better understanding of the structures of the human body and for possible revision in the future. The conclusions were as follows: 1. In general, short tunnels were called Foramina (singular: Foramen), and long tunnels Canales (singular: Canalis). 2. One end of Canalis was sometimes called Foramen. In this case, Canalis and Foramen were usually modified by the same words. 3. Each name of Foramina contained the word which means form, state, absolute size, region of existence, one of the contents or function of Foramina. 4. Each name of Canales contained the word which means region of existence, one of the contents or function of Canales. 5. Some names of Foramina and Canales that were supposed to mean the region of existence meant one of the contents of the structures. 6. As for Latin anatomical names, the relation between words were relatively clear by the proper use of noun, adjective, nominative, and genitive. 7. Since different Chinese characters were sometimes pronounced similarly in Japanese anatomical names, different structures might be confused. 8. It seemed that some Japanese anatomical names needed partial correction.

  5. CT and MR Imagings of Semicircular Canal Aplasia

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Chung Hee; Hong, Hyun Sook; Yi, Beom Ha; Cha, Jang Gyu; Park, Seong Jin; Kim, Dae Ho; Lee, Hae Kyung; Kim, Shi Chan [Soonchunhyang University Bucheon Hospital, Bucheon (Korea, Republic of)

    2009-07-15

    To evaluate the clinical, CT and MR imaging findings of semicircular canal (SCC) aplasia and to evaluate if a correlation exists between these findings and the associated anomalies or syndromes. This study retrospectively reviewed the CT and MRI findings of five patients with SCC aplasia. The CT and MR findings were analyzed for SCC, direction of facial nerve canal, cochlea, vestibule, oval or round window, middle ear ossicles, and internal auditory canal (IAC). The subjects included three boys and two girls ranging in age from one to 120 months (mean age; 51 months). Four of the subjects had the CHARGE syndrome, and one had the Goldenhar syndrome. Moreover, four subjects had sensorineural hearing loss and one had combined hearing loss. The course of the facial nerve canal was abnormal in all five cases. Moreover, trapped cochlea and dysplastic modiolus were each observed in one case. Four subjects had atresia of the oval window; whereas ankylosis of the ossicles was present in three subjects. IAC stenosis was present in one patient with the CHARGE syndrome. The aberrant course of the facial nerve canal, atresia of the oval window, and abnormal ossicles were frequently associated in patients with SCC aplasia. In addition, the Goldenhar and CHARGE syndromes were also commonly associated syndromes.

  6. Micro-Machined Flow Sensors Mimicking Lateral Line Canal Neuromasts

    Directory of Open Access Journals (Sweden)

    Hendrik Herzog

    2015-08-01

    Full Text Available Fish sense water motions with their lateral line. The lateral line is a sensory system that contains up to several thousand mechanoreceptors, called neuromasts. Neuromasts occur freestanding on the skin and in subepidermal canals. We developed arrays of flow sensors based on lateral line canal neuromasts using a biomimetic approach. Each flow sensor was equipped with a PDMS (polydimethylsiloxane lamella integrated into a canal system by means of thick- and thin-film technology. Our artificial lateral line system can estimate bulk flow velocity from the spatio-temporal propagation of flow fluctuations. Based on the modular sensor design, we were able to detect flow rates in an industrial application of tap water flow metering. Our sensory system withstood water pressures of up to six bar. We used finite element modeling to study the fluid flow inside the canal system and how this flow depends on canal dimensions. In a second set of experiments, we separated the flow sensors from the main stream by means of a flexible membrane. Nevertheless, these biomimetic neuromasts were still able to sense flow fluctuations. Fluid separation is a prerequisite for flow measurements in medical and pharmaceutical applications.

  7. Nanodiamond-Gutta Percha Composite Biomaterials for Root Canal Therapy.

    Science.gov (United States)

    Lee, Dong-Keun; Kim, Sue Vin; Limansubroto, Adelheid Nerisa; Yen, Albert; Soundia, Akrivoula; Wang, Cun-Yu; Shi, Wenyuan; Hong, Christine; Tetradis, Sotirios; Kim, Yong; Park, No-Hee; Kang, Mo K; Ho, Dean

    2015-11-24

    Root canal therapy (RCT) represents a standard of treatment that addresses infected pulp tissue in teeth and protects against future infection. RCT involves removing dental pulp comprising blood vessels and nerve tissue, decontaminating residually infected tissue through biomechanical instrumentation, and root canal obturation using a filler material to replace the space that was previously composed of dental pulp. Gutta percha (GP) is typically used as the filler material, as it is malleable, inert, and biocompatible. While filling the root canal space with GP is the standard of care for endodontic therapies, it has exhibited limitations including leakage, root canal reinfection, and poor mechanical properties. To address these challenges, clinicians have explored the use of alternative root filling materials other than GP. Among the classes of materials that are being explored as novel endodontic therapy platforms, nanodiamonds (NDs) may offer unique advantages due to their favorable properties, particularly for dental applications. These include versatile faceted surface chemistry, biocompatibility, and their role in improving mechanical properties, among others. This study developed a ND-embedded GP (NDGP) that was functionalized with amoxicillin, a broad-spectrum antibiotic commonly used for endodontic infection. Comprehensive materials characterization confirmed improved mechanical properties of NDGP over unmodified GP. In addition, digital radiography and microcomputed tomography imaging demonstrated that obturation of root canals with NDGP could be achieved using clinically relevant techniques. Furthermore, bacterial growth inhibition assays confirmed drug functionality of NDGP functionalized with amoxicillin. This study demonstrates a promising path toward NDGP implementation in future endodontic therapy for improved treatment outcomes.

  8. An Efficient Bayesian Iterative Method for Solving Linear Systems

    Institute of Scientific and Technical Information of China (English)

    Deng DING; Kin Sio FONG; Ka Hou CHAN

    2012-01-01

    This paper concerns with the statistical methods for solving general linear systems.After a brief review of Bayesian perspective for inverse problems,a new and efficient iterative method for general linear systems from a Bayesian perspective is proposed.The convergence of this iterative method is proved,and the corresponding error analysis is studied.Finally,numerical experiments are given to support the efficiency of this iterative method,and some conclusions are obtained.

  9. Studying uniform thickness II: Transversely nonsimple iterated torus knots

    DEFF Research Database (Denmark)

    LaFountain, Douglas

    2011-01-01

    We prove that an iterated torus knot type in the standard contact 3-sphere fails the uniform thickness property (UTP) if and only if it is formed from repeated positive cablings, which is precisely when an iterated torus knot supports the standard contact structure. This is the first complete UTP...... classification for a large class of knots. We also show that all iterated torus knots that fail the UTP support cabling knot types that are transversely non-simple....

  10. Arranging transient process used in iterative learning control system

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Considering the same initial state error in each repetitive operation in the iterative learning system, a method of arranging the transient process is given. During the current iteration, the system will track the transient function firstly, and then the expected trajectory. After several iterations, the learning system output will trend to the arranged curve, which has avoided the effect of the initial error on the controller. Also the transient time can be changed as you need, which makes the designing si...

  11. Solving the Kuramoto-Sivashinsky equation via Variational Iteration Method

    Directory of Open Access Journals (Sweden)

    majeed Ahmed Yousif

    2014-06-01

    Full Text Available In this study, the approximate solutions for the Kuramoto-Sivashinsky equation by using the Variational Iteration Method (VIM are obtained. Comparisons with the exact solutions and the solutions obtained by the Homotopy Perturbation Method (HPM, the numerical example show that the Variational Iteration Method (VIM is accurate and effective and suitable for this kind of problem. Keywords: Kuramoto-Sivashinsky equation, Variational Iteration Method.

  12. Various Newton-type iterative methods for solving nonlinear equations

    Directory of Open Access Journals (Sweden)

    Manoj Kumar

    2013-10-01

    Full Text Available The aim of the present paper is to introduce and investigate new ninth and seventh order convergent Newton-type iterative methods for solving nonlinear equations. The ninth order convergent Newton-type iterative method is made derivative free to obtain seventh-order convergent Newton-type iterative method. These new with and without derivative methods have efficiency indices 1.5518 and 1.6266, respectively. The error equations are used to establish the order of convergence of these proposed iterative methods. Finally, various numerical comparisons are implemented by MATLAB to demonstrate the performance of the developed methods.

  13. High power microwave diagnostic for the fusion energy experiment ITER

    DEFF Research Database (Denmark)

    Korsholm, Søren Bang; Leipold, Frank; Goncalves, B.

    2016-01-01

    Microwave diagnostics will play an increasingly important role in burning plasma fusion energy experiments like ITER and beyond. The Collective Thomson Scattering (CTS) diagnostic to be installed at ITER is an example of such a diagnostic with great potential in present and future experiments....... The ITER CTS diagnostic will inject a 1 MW 60 GHz gyrotron beam into the ITER plasma and observe the scattering off fluctuations in the plasma — to monitor the dynamics of the fast ions generated in the fusion reactions....

  14. Pseudorandom Numbers and Hash Functions from Iterations of Multivariate Polynomials

    CERN Document Server

    Ostafe, Alina

    2009-01-01

    Dynamical systems generated by iterations of multivariate polynomials with slow degree growth have proved to admit good estimates of exponential sums along their orbits which in turn lead to rather stronger bounds on the discrepancy for pseudorandom vectors generated by these iterations. Here we add new arguments to our original approach and also extend some of our recent constructions and results to more general orbits of polynomial iterations which may involve distinct polynomials as well. Using this construction we design a new class of hash functions from iterations of polynomials and use our estimates to motivate their "mixing" properties.

  15. 33 CFR 207.640 - Sacramento Deep Water Ship Channel Barge Lock and Approach Canals; use, administration, and...

    Science.gov (United States)

    2010-07-01

    ... movement and position of all water traffic while at or near the locks and in the barge canals. (2... be raced or crowded alongside another in the barge canals. When entering the barge canals and...

  16. Quel contrôle de gestion pour les startups ?

    OpenAIRE

    Meyssonnier, François

    2015-01-01

    Une étude de huit PME fondées sur la science permet d’identifier les spécificités du contrôle de gestion des startups. Dans les startups émergentes le dirigeant n’utilise que des linéaments de contrôle de gestion essentiellement pour développer son approche cognitive du business model. Dans les startups en croissance le contrôle de gestion a un rôle de garde-fou et les outils de pilotage de la performance sont utilisés essentiellement de façon interactive et pour la prévision. Les principaux ...

  17. Benign paroxysmal positional vertigo simultaneously affecting several canals: a 46-patient series.

    Science.gov (United States)

    Soto-Varela, Andrés; Rossi-Izquierdo, Marcos; Santos-Pérez, Sofía

    2013-03-01

    Although it is uncommon for benign paroxysmal positional vertigo (BPPV) to affect more than one canal simultaneously, it is not exceptional. We attempt to determine whether these patients present differences relative to "single-canal" cases. A prospective study was done in patients with BPPV, divided into three groups: single-canal BPPV, multi-canal BPPV in one ear and multi-canal BPPV in both ears. Diagnosis was by Dix and Hallpike, supine roll and cephalic hyperextension tests. Treatment was according to the affected canals, by Semont, Epley, Lempert and Yacovino manoeuvres. Aetiology, sex, age, response to treatment, recurrence and final status in each of the three groups was evaluated. Five hundred and eighty-three patients were diagnosed with BPPV: 537 single-canal (92 %) and 46 multi-canal (8 %); of the latter, 36 bilateral and 10 unilateral cases. Basic differences between groups were: greater percentage of idiopathic cases in single-canal (p BPPV was more common in unilateral multi-canal (p = 0.006, Chi-square). No differences between groups in response to treatment, recurrence and final status were detected. There are aetiological differences between patients with single-canal BPPV, unilateral multi-canal BPPV and bilateral multi-canal BPPV. Response to therapeutic manoeuvres, however, shows that over 90 % of the patients in all the groups are cured.

  18. Síndrome de Deiscência de Canal Semicircular Superior Superior Canal Dehiscence Syndrome

    Directory of Open Access Journals (Sweden)

    Suzane da Cunha Ferreira

    2006-06-01

    Full Text Available A Síndrome de Deiscência de Canal Semicircular Superior (SDCSS, primeiramente descrita em 1998 por Minor et al., caracteriza-se por vertigem associada à presença de nistagmo, relacionados à exposição a estímulos sonoros intensos ou a modificações de pressão dentro da orelha média ou intracraniana. Disacusia, em sua maioria de padrão condutivo à audiometria tonal, também pode estar presente. Nesta revisão da literatura objetivou-se abordar a SDCSS, com seus principais sinais e sintomas, achados diagnósticos e tratamento, assim como enfatizar a importância de sua inclusão dentre as causas de vertigem, visto tratar-se de acometimento ainda pouco conhecido até mesmo entre especialistas. O diagnóstico correto, além de possibilitar seu tratamento, impede que abordagens diagnósticas e terapêuticas inapropriadas sejam realizadas.The Superior Canal Dehiscence Syndrome (SCDS was first reported by Minor at. Al. (1998, and has been characterized by vertigo and vertical-torsional eye movements related to loud sounds or stimuli that change middle ear or intracranial pressure. Hearing loss, for the most part with conductive patterns on audiometry, may be present in this syndrome. We performed a literature survey in order to to present symptoms, signs, diagnostic and therapeutic approaches to the SCDS, also aiming at stressing the great importance of including this syndrome among the tractable cause of vertigo. We should emphasize that this is a recent issue, still unknown by some specialists. The Correct SCDS diagnosis, besides enabling patient treatment, precludes misdiagnosis and inadequate therapeutic approaches.

  19. Influence of delayed pouring on irreversible hydrocolloid properties

    OpenAIRE

    Stéfani Becker Rodrigues; Carolina Rocha Augusto; Vicente Castelo Branco Leitune; Susana Maria Werner Samuel; Fabrício Mezzomo Collares

    2012-01-01

    The aim of this study was to evaluate the physical properties of irreversible hydrocolloid materials poured immediately and after different storage periods. Four alginates were tested: Color Change (Cavex); Hydrogum (Zhermack); Hydrogum 5 (Zhermack); and Hydro Print Premium (Coltene). Their physical properties, including the recovery from deformation (n = 3), compressive strength (n = 3), and detail reproduction and gypsum compatibility (n = 3), were analyzed according to ANSI/ ADA specificat...

  20. Bioceramic-Based Root Canal Sealers: A Review

    Science.gov (United States)

    Che Ab Aziz, Zeti A.

    2016-01-01

    Bioceramic-based root canal sealers are considered to be an advantageous technology in endodontics. The aim of this review was to consider laboratory experiments and clinical studies of these sealers. An extensive search of the endodontic literature was made to identify publications related to bioceramic-based root canal sealers. The outcome of laboratory and clinical studies on the biological and physical properties of bioceramic-based sealers along with comparative studies with other sealers was assessed. Several studies were evaluated covering different properties of bioceramic-based sealers including physical properties, biocompatibility, sealing ability, adhesion, solubility, and antibacterial efficacy. Bioceramic-based sealers were found to be biocompatible and comparable to other commercial sealers. The clinical outcomes associated with the use of bioceramic-based root canal sealers are not established in the literature. PMID:27242904

  1. Classification, mechanism and surgical treatments for spinal canal cysts

    Institute of Scientific and Technical Information of China (English)

    Jianjun Sun

    2016-01-01

    A variety of cystic lesions may develop in spinal canal. These cysts can be divided into intramedullary, intradural, extradural, cervical, thoracic, lumbar, and sacral cysts according to anatomical presentation, as well as arachnoid, meningeal, perineural, juxtafacet, discal, neurenteric cysts, and cyst-like lesions according to different etiologies. Mechanisms of initiation and growth vary for different cysts, such as congenital, trauma, bleeding, inflammatory, instability, hydrostatic pressure, osmosis of water, secretion of cyst wall, and one-way-valve effect, etc. Up to now, many treatment methods are available for these different spinal canal cysts. One operation method can be applied in cysts with different types. On the other hand, several operation methods may be utilized in one type of cyst according to the difference of location or style. However, same principle should be obeyed in surgical treatment despite of difference among spinal canal cysts, given open surgery is melely for symptomatic cyst. The surgical approach should be tailored to the individual patient.

  2. Acoustic impedances of ear canals measured by impedance tube

    DEFF Research Database (Denmark)

    Ciric, Dejan; Hammershøi, Dorte

    2007-01-01

    During hearing sensitivity tests, the sound field is commonly generated by an earphone placed on a subject ear. One of the factors that can affect the sound transmission in the ear is the acoustic impedance of the ear canal. Its importance is related to the contribution of other elements involved...... in the transmission such as the earphone impedance. In order to determine the acoustic impedances of human ear canals, the standardized method for measurement of complex impedances used for the measurement of the audiometric earphone impedances is applied. It is based on the transfer function between two microphone...... locations in an impedance tube. The end of the tube representing the measurement plane is placed at the ear canal entrance. Thus, the impedance seen from the entrance inward is measured on 25 subjects. Most subjects participated in the previous measurement of the ratio between the pressures at the open...

  3. The problem of fluid-dynamics in semicircular canal

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    An analytical solution with high accuracy which holds for any values of ε for fluid-dynamics model equation in a single semicircular canal presented by Buskirk and his co-workers has been obtained.It not only includes all of the results of Buskirk et al.but also covers three possible kinds of dynamical response modes in practice.The theoretical results are in better agreement with those of experimental observations.This investigation has laid a reliable theoretical foundation for quantitatively understanding fluid-dynamics in semicircular canal,especially fluid dynamical response.The distribution of the velocity of the endolymph in semicircular canal is given.A nonstandard method of the inverse Laplace transform is presented.

  4. The problem of fluid-dynamics in semicircular canal

    Institute of Scientific and Technical Information of China (English)

    徐明瑜; 谭文长

    2000-01-01

    An analytical solution with high accuracy which holds for any values of E for fluid-dynamics model eguation in a single semicircular canal presented by Buskirk and his co-workers has been ob-tained. it not only includes ali of the results of Buskirk et al. but also covers three possible kinds of dy-namical response modes in practice. The theoretical results are in betler agreement with those of ex-perimental observations. This investigation has laid a reliable theoretical foundation for quantitatively understanding fluid-dynamics in semicircular canal, especially fluid dynamical response. The distribu-tion of the velocity of the endolymph in semicircular canal is given. A nonstandard method of the in-verse Laplace transform is presented.

  5. Temporal Bone Fracture Causing Superior Semicircular Canal Dehiscence

    Directory of Open Access Journals (Sweden)

    Kevin A. Peng

    2014-01-01

    Full Text Available Importance. Superior semicircular canal dehiscence (SCD is a third window lesion of the inner ear causing symptoms of vertigo, autophony, tinnitus, and hearing loss. A “two-hit” hypothesis has traditionally been proposed, whereby thinly developed bone overlying the superior canal is disrupted by a sudden change in intracranial pressure. Although the symptoms of SCD may be precipitated by head injury, no previous reports have described a temporal bone fracture directly causing SCD. Observations. Two patients sustained temporal bone fractures after closed head trauma, and developed unilateral otologic symptoms consistent with SCD. In each instance, computed tomography imaging revealed fractures extending through the bony roof of the superior semicircular canal. Conclusions and Relevance. Temporal bone fractures, which are largely treated nonoperatively, have not previously been reported to cause SCD. As it is a potentially treatable entity, SCD resulting from temporal bone fracture must be recognized as a possibility and diagnosed promptly if present.

  6. Tullio phenomenon in superior semicircular canal dehiscence syndrome.

    Science.gov (United States)

    Basura, Gregory J; Cronin, Scott J; Heidenreich, Katherine D

    2014-03-18

    Tullio phenomenon refers to eye movements induced by sound.(1) This unusual examination finding may be seen in superior semicircular canal dehiscence (SSCD) syndrome.(2) This disorder is due to absent bone over the superior semicircular canal (figure). Patients complain of dizziness triggered by loud sound, aural fullness, autophony, and pulsatile tinnitus. When Tullio phenomenon exists in SSCD syndrome, the patient develops a mixed vertical-torsional nystagmus in which the slow phase rotates up and away from the affected ear (video on the Neurology® Web site at Neurology.org). This pattern of nystagmus aligns in the plane of the dehiscent semicircular canal and is due to excitation of its afferent nerves.

  7. RADIOLOGICAL STUDY OF HUMAN LUMBAR VERTEBRAL CANAL IN VIDHARBHA REGION

    Directory of Open Access Journals (Sweden)

    Shruti

    2015-06-01

    Full Text Available Increase in number of patients suffering from backache all over world needs changing health polices and cost benefit analysis, it is important to look at diseases causing low back pain and for this study of radiological structure of lumbar vertebral canal is undertaken. AIMS : To reveal the radiological feature of Human lumbar vert ebral canal. METHOD AND MATERIAL : 50 - xray of lumbar canal was collected from orthopedic department of government medical college, Nagpur. STATISTICAL ANALYSIS : Data is presented in mean ± standard deviation and categorical variable are presented in percen tage. Comparison with previous study is done. RESULT : M aximum measurement as greater in male than female of same age group. CONCLUSION : T he present study and previous studies are compared and the non - significant result is found.

  8. Influence of delayed pouring on irreversible hydrocolloid properties

    Directory of Open Access Journals (Sweden)

    Stéfani Becker Rodrigues

    2012-10-01

    Full Text Available The aim of this study was to evaluate the physical properties of irreversible hydrocolloid materials poured immediately and after different storage periods. Four alginates were tested: Color Change (Cavex; Hydrogum (Zhermack; Hydrogum 5 (Zhermack; and Hydro Print Premium (Coltene. Their physical properties, including the recovery from deformation (n = 3, compressive strength (n = 3, and detail reproduction and gypsum compatibility (n = 3, were analyzed according to ANSI/ADA specification no. 18. Specimens were stored at 23ºC and humidity and were then poured with gypsum immediately and after 1, 2, 3, 4, and 5 days. The data were analyzed by two-way analysis of variance (ANOVA and Tukey's test at p < 0.05. All of the alginate impression materials tested exhibited detail reproduction and gypsum compatibility at all times. Hydro Print Premium and Hydrogum 5 showed recovery from deformation, as established by ANSI/ADA specification no. 18, after 5 days of storage. As the storage time increased, the compressive strength values also increased. Considering the properties of compounds' recovery from deformation, compressive strength, and detail reproduction and gypsum compatibility, irreversible hydrocolloids should be poured immediately.

  9. Big Bang pour le grand public - French version only

    CERN Multimedia

    2004-01-01

    Pour commémorer les 50 ans du CERN et l'année de la physique en 2005, la section de physique de l'Université de Genève ouvre une fois de plus ses portes aux non initiés et organise une série de conférences de vulgarisation scientifique. La première conférence, le 7 décembre prochain aura pour thème le Big-Bang et les observations qui corroborent cette théorie. Le Professeur Georges Meylan, Directeur du Laboratoire d'Astrophysique de l'EPFL, donnera cette conférence destinée à tous les publics. Chacune des conférences débutera par une démonstration de détection de rayons cosmiques dans l'auditoire et l'utilisation de ces signaux venus du fond de l'univers pour créer une ?musique cosmique', en collaboration avec le Professeur Ellberger et Nikolai Mihailov du conservatoire de musique de Genève. Ces processus cosmiques étant aléatoires, chacun de ces concerts sera unique. Les preuves observationnelles du Big Bang par le Professeur Georges Meylan Directeur du Laboratoire d'Astrophysique ...

  10. Logistique ST-HM pour le projet LHC

    CERN Document Server

    Prodon, S

    2002-01-01

    Ce papier a pour objectif de présenter la structure mise en place au sein du groupe ST-HM pour assurer la logistique d'installation du projet LHC. L'aspect traèabilité sera tout d'abord évoqué avec notamment la mise en place d'outils informatiques tels que le formulaire EDH de demande d'intervention transport-manutention et le système SIRIAC de suivi et de validation des transports réalisés. Ces développements informatiques s'intègrent dans le cadre plus général des modalités de traèabilité des équipements établies en collaboration avec le groupe SL/MR, chargé de la gestion des espaces pour le projet LHC. Les procédures proprement dites de transport des équipements feront l'objet d'un développement particulier. Leur processus d'élaboration sera détaillé : des premières réunions d'information jusqu'à la validation finale par les trois parties (demandeur, groupe ST-HM et contractant ST-HM). L'intégration de ces documents dans la logistique générale ST-HM de planification des ressou...

  11. Éléments finis pour les fluides incompressibles

    CERN Document Server

    Azaïez, Mejdi; Mund, Ernest

    2011-01-01

    Cet ouvrage présente l'ensemble des concepts et méthodes nécessaires à la modélisation numérique par éléments finis du comportement des fluides visqueux newtoniens incompressibles. Après un bref rappel des équations de base et des modèles simplifiés, il expose en détail les techniques d'approximation de ces équations par éléments finis pour les dépendances spatiale et temporelle (problèmes de diffusion, d'advection-diffusion et de transport). Une attention toute particulière est portée à la discrétisation spatiale des équations de Stokes et aux algorithmes temporels pour la simulation numérique directe des équations de Navier-Stokes. Un chapitre ancillaire résume les méthodes de résolution des systèmes algébriques de grande taille à structure creuse, caractéristiques des méthodes d'éléments finis. L'exposé clair, didactique et progressif offre un contenu équilibré entre théorie et pratique. Ce manuel constitue ainsi une référence indispensable pour les étudiants de ma...

  12. Influence of delayed pouring on irreversible hydrocolloid properties.

    Science.gov (United States)

    Rodrigues, Stéfani Becker; Augusto, Carolina Rocha; Leitune, Vicente Castelo Branco; Samuel, Susana Maria Werner; Collares, Fabrício Mezzomo

    2012-01-01

    The aim of this study was to evaluate the physical properties of irreversible hydrocolloid materials poured immediately and after different storage periods. Four alginates were tested: Color Change (Cavex); Hydrogum (Zhermack); Hydrogum 5 (Zhermack); and Hydro Print Premium (Coltene). Their physical properties, including the recovery from deformation (n = 3), compressive strength (n = 3), and detail reproduction and gypsum compatibility (n = 3), were analyzed according to ANSI/ADA specification no. 18. Specimens were stored at 23ºC and humidity and were then poured with gypsum immediately and after 1, 2, 3, 4, and 5 days. The data were analyzed by two-way analysis of variance (ANOVA) and Tukey's test at p < 0.05. All of the alginate impression materials tested exhibited detail reproduction and gypsum compatibility at all times. Hydro Print Premium and Hydrogum 5 showed recovery from deformation, as established by ANSI/ADA specification no. 18, after 5 days of storage. As the storage time increased, the compressive strength values also increased. Considering the properties of compounds' recovery from deformation, compressive strength, and detail reproduction and gypsum compatibility, irreversible hydrocolloids should be poured immediately.

  13. Direct Waveform Inversion by Iterative Inverse Propagation

    CERN Document Server

    Schlottmann, R B

    2009-01-01

    Seismic waves are the most sensitive probe of the Earth's interior we have. With the dense data sets available in exploration, images of subsurface structures can be obtained through processes such as migration. Unfortunately, relating these surface recordings to actual Earth properties is non-trivial. Tomographic techniques use only a small amount of the information contained in the full seismogram and result in relatively low resolution images. Other methods use a larger amount of the seismogram but are based on either linearization of the problem, an expensive statistical search over a limited range of models, or both. We present the development of a new approach to full waveform inversion, i.e., inversion which uses the complete seismogram. This new method, which falls under the general category of inverse scattering, is based on a highly non-linear Fredholm integral equation relating the Earth structure to itself and to the recorded seismograms. An iterative solution to this equation is proposed. The res...

  14. Electronic noise modeling in statistical iterative reconstruction.

    Science.gov (United States)

    Xu, Jingyan; Tsui, Benjamin M W

    2009-06-01

    We consider electronic noise modeling in tomographic image reconstruction when the measured signal is the sum of a Gaussian distributed electronic noise component and another random variable whose log-likelihood function satisfies a certain linearity condition. Examples of such likelihood functions include the Poisson distribution and an exponential dispersion (ED) model that can approximate the signal statistics in integration mode X-ray detectors. We formulate the image reconstruction problem as a maximum-likelihood estimation problem. Using an expectation-maximization approach, we demonstrate that a reconstruction algorithm can be obtained following a simple substitution rule from the one previously derived without electronic noise considerations. To illustrate the applicability of the substitution rule, we present examples of a fully iterative reconstruction algorithm and a sinogram smoothing algorithm both in transmission CT reconstruction when the measured signal contains additive electronic noise. Our simulation studies show the potential usefulness of accurate electronic noise modeling in low-dose CT applications.

  15. Rollout Sampling Policy Iteration for Decentralized POMDPs

    CERN Document Server

    Wu, Feng; Chen, Xiaoping

    2012-01-01

    We present decentralized rollout sampling policy iteration (DecRSPI) - a new algorithm for multi-agent decision problems formalized as DEC-POMDPs. DecRSPI is designed to improve scalability and tackle problems that lack an explicit model. The algorithm uses Monte- Carlo methods to generate a sample of reachable belief states. Then it computes a joint policy for each belief state based on the rollout estimations. A new policy representation allows us to represent solutions compactly. The key benefits of the algorithm are its linear time complexity over the number of agents, its bounded memory usage and good solution quality. It can solve larger problems that are intractable for existing planning algorithms. Experimental results confirm the effectiveness and scalability of the approach.

  16. Iterative surface construction for blind deflectometry

    Science.gov (United States)

    Zhao, Wenchuan; Graves, Logan R.; Huang, Run; Song, Weihong; Kim, DaeWook

    2016-09-01

    Freeform optics provide excellent performance for a wide variety of applications. However, obtaining an accurate freeform surface measurement is highly challenging due to its large aspheric/freeform departure. It has been proven that SCOTS (Software Configurable Optical Test System), an advanced deflectometry system developed at the University of Arizona, can measure the departure of a freeform surface from the desired shape with nanometer accuracy. Here, a new data processing technique was used to measure a freeform surface without any prior knowledge of the shape of the surface. Knowing only the geometry of one point on the test surface, this method can take a blind measurement of a freeform surface and arrive at the true surface through iterative construction.

  17. Status of ITER Cryodistribution and Cryoline project

    Science.gov (United States)

    Sarkar, B.; Vaghela, H.; Shah, N.; Bhattacharya, R.; Choukekar, K.; Patel, P.; Kapoor, H.; Srinivasa, M.; Chang, H. S.; Badgujar, S.; Monneret, E.

    2017-02-01

    The system of ITER Cryodistribution (CD) and Cryolines (CLs) is an integral interface between the Cryoplant systems and the superconducting (SC) magnets as well as Cryopumps (CPs). The project has progressed from the conceptual stage to the industrial stage. The subsystems are at various stages of design as defined by the project, namely, preliminary design, final design and formal reviews. Significant progresses have been made in the prototypes studies and design validations, such as the CL and cold circulators. While one of the prototype CL is already tested, the other one is in manufacturing phase. Performance test of two cold circulators have been completed. Design requirements are unique due the complexity arising from load specifications, layout constraints, regulatory compliance, operating conditions as well as several hundred interfaces. The present status of the project in terms of technical achievements, implications of the changes and the technical management as well as the risk assessment and its mitigation including path forward towards realization is described.

  18. Iterative Precise Conductivity Measurement with IDEs.

    Science.gov (United States)

    Hubálek, Jaromír

    2015-05-22

    The paper presents a new approach in the field of precise electrolytic conductivity measurements with planar thin- and thick-film electrodes. This novel measuring method was developed for measurement with comb-like electrodes called interdigitated electrodes (IDEs). Correction characteristics over a wide range of specific conductivities were determined from an interface impedance characterization of the thick-film IDEs. The local maximum of the capacitive part of the interface impedance is used for corrections to get linear responses. The measuring frequency was determined at a wide range of measured conductivity. An iteration mode of measurements was suggested to precisely measure the conductivity at the right frequency in order to achieve a highly accurate response. The method takes precise conductivity measurements in concentration ranges from 10(-6) to 1 M without electrode cell replacement.

  19. ECE for NTM control on ITER

    Directory of Open Access Journals (Sweden)

    Westerhof E.

    2012-09-01

    Full Text Available Control of Neoclassical Tearing Modes (NTMs requires an accurate and low latency detection of the mode position. For a burning H-mode ITER plasma, simulations are conducted for both ECE detected via the equatorial port plug and along the line-of-sight of the ECCD launchers. Simulated ECE is detected using synthetic radiometers, with settings chosen to meet the required accuracy. A video bandwidth of 2 kHz is used which allows for an intermediate frequency bandwidth of BIF = 400 MHz for ECE detected via the equatorial port plug. For ECE detected via the ECCD line-of-sight, an intermediate frequency bandwidth of 1.5 GHz and 1 GHz for the 2/1 and 3/2 NTM respectively suffices for accurate location detection. For both ECE systems, the latency requirements for NTM suppression are fulfilled.

  20. On singular interval-valued iteration groups

    Directory of Open Access Journals (Sweden)

    Marek Cezary Zdun

    2016-09-01

    Full Text Available Let I=(a,b and L be a nowhere dense perfect set containing the ends of the interval I and let varphi:Ito mathbb R be a non-increasing continuoussurjection constant on the components of Isetminus L and the closures of these components be the maximal intervals of constancy of varphi . The family F^t,tin mathbb R of theinterval-valued functions F^t(x:=varphi^ -1 t+varphi(x , xin I forms a set-valued iteration group. We determine a maximal densesubgroup Tsubsetneq mathbb R such that the set-valued subgroup F^t,tin T has some regular properties. In particular, the mappings Tbackepsilon tto F^t(x for tin T possess selections f^t(x in F^t(x, which are disjoint group of continuous functions.