WorldWideScience

Sample records for canadian geotechnical conference

  1. Proceedings of GeoCalgary 2010 : the 63. Canadian geotechnical conference and 6. Canadian permafrost conference

    Energy Technology Data Exchange (ETDEWEB)

    Kwok, C. [Stantec Consulting Ltd., Calgary, AB (Canada); Moorman, B. [Calgary Univ., AB (Canada); Armstrong, R. [AECOM, Calgary, AB (Canada); Henderson, J. [Associated Geosciences Ltd., Calgary, AB (Canada)] (comps.) (and others)

    2010-07-01

    More than 500 delegates from industry, government, universities and research centres attended this conference to exchange professional knowledge on research and development that affects all sectors of geotechnical engineering, applied geology and hydrogeology. The conference also highlighted recent geoenvironmental achievements. The geotechnical sessions were entitled: transportation geotechniques; soil mechanics; foundations; infrastructure design and operations in permafrost; mining in permafrost; oil sands geotechnology; rock mechanics; landslides; permafrost foundation design and slope stability; groundwater and slope stability; seepage and hydrogeology; harbour and shoreline geotechniques; mine drainage; mine site remediation; climate change; ground ice; geophysics and remote sensing; geoenvironmental sustainability; Mackenzie Delta Rock Glaciers; engineering geology; geohazards; waste soils and soil stabilization. The conference featured more than 230 presentations, of which 33 have been catalogued separately for inclusion in this database. refs., tabs., figs.

  2. Proceedings of GeoSask 2005 : The 58. Canadian Geotechnical Conference and 6. Joint CGS-IAH Groundwater Specialty Conference

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    The Canadian and international geotechnical community gathered at this conference to exchange information on recent research and development concerning all sectors of geotechnical engineering, applied geology and hydrogeology. The technical sessions addressed a wide range of geotechnical engineering issues such as soil mechanics and geodynamics; geoenvironmental issues associated with contaminant transport in landfills; hydrogeology issues such as aquifer properties, hydrogeochemistry, groundwater resources, hydrogeological mapping, contaminants and remediation; geosynthetics; geotechnical modelling; rock engineering; engineering geology; mining geotechnics; buried structures; unsaturated soils and aquitards. The presentations included several geotechnical case studies that focused on broad issues such as hydraulic properties of sedimentary rock aquifers, design criteria for geotextile filters used in agricultural drainage, the long term performance of containment systems, slope stability analysis of landfills, methane emissions from landfills, shear zones in weak rocks and tailings at oil sands operations. The conference featured approximately 200 presentations, of which 17 have been catalogued separately for inclusion in this database. refs., tabs., figs.

  3. Proceedings of GeoHalifax 2009 : the 62. Canadian geotechnical conference and 10. joint CGS/IAH-CNC groundwater conference

    Energy Technology Data Exchange (ETDEWEB)

    Lake, C.; Fenton, G. [Dalhousie Univ., Halifax, NS (Canada); Taylor, B. [Stantec Consulting Ltd., Surrey, BC (Canada); Ferguson, G. [Saint Francis Xavier Univ., Antigonish, NS (Canada)] (comps.) (and others)

    2009-07-01

    More than 500 delegates from industry, government, universities and research centres attended this conference to exchange professional knowledge on research and development that affects all sectors of geotechnical engineering, applied geology and hydrogeology. The conference also highlighted recent geoenvironmental achievements. The geotechnical sessions were entitled: soil mechanics; soil mechanics and brownfields; foundation engineering; landslide and slopes engineering; rock mechanics; risk assessment; reliability-based design; geoenvironmental issues; transportation geotechniques; marine geotechniques and geohazards; non-textbook soils and waste soils; covers and liners; instrumentation; harbour and shoreline geotechniques; geosynthetic mechanically stabilized earth (MSE) systems; cold regions and climate change; computer applications; regional hydrogeology; groundwater-surface water interaction; well hydraulics; radioactive waste management; groundwater sustainability; source water protection; mine waters; field techniques in hydrogeology; and hydrogeology of fractured rocks. The conference featured more than 230 presentations, of which 37 have been catalogued separately for inclusion in this database. refs., tabs., figs.

  4. Eleventh Canadian geotechnical colliquium

    International Nuclear Information System (INIS)

    Rowe, R.K.

    1988-01-01

    The role of analysis in the evaluation and design of barriers is discussed. Factors considered include (i) the mechanisms controlling contaminant migration through barriers; (ii) the determination of diffusion and distribution coefficients; (iii) leachate mounding and the effect of clogging of leachate collection systems upon contaminant migration through barriers; (iv) the importance of considering the finite mass of contaminant available for transport into the soil and a method of modelling the effect of finite mass of contaminant; and (v) examples of how analysis may improve the geotechnical engineer's feel for the effectiveness of potential contaminant attenuation mechanisms in both glacial till deposits and fractured rock

  5. Proceedings (of the) first Canadian conference on environmental geotechnics. Comptes-rendus (de la) premiere conference canadienne de geotechnique environnementale

    Energy Technology Data Exchange (ETDEWEB)

    Chapuis, R P; Aubertin, M

    1991-01-01

    A conference was held to discuss responses to increasing soil and groundwater contamination. Papers were presented in the areas of regulations and guidelines, design, management and performance of sites, clay, soil-bentonite and geosynthetic barriers, hydrogeology, geochemistry and fate of contaminants, contaminated sites exploration and rehabilitation, leachate generation and treatment, and modelling and geostatistics. Separate abstracts have been prepared for 22 papers presented at the conference.

  6. Proceedings of OttawaGeo 2007 : the Diamond Jubilee 60. Canadian Geotechnical Conference and 8. Joint CGS/IAH-CNC Groundwater Conference : Breaking Ground in the Nation's Capital

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    This conference provided a forum for more than 600 delegates from industry, government universities and research centres to share their professional knowledge on research and development that affects all sectors of geotechnical engineering, applied geology and hydrogeology. Accomplishments in the geoenvironmental field were also highlighted. The geotechnical themes included buried structures; cold region engineering; computer modelling; earthquake engineering; engineering geology; foundation engineering; landfills and contaminated sites; mining geotechniques and the environment; slope stability/landslides; unsaturated soils; geosynthetics; problematic soils; rock mechanics; soil dynamics and liquefaction; and, soil-structure interactions. The hydrogeology themes included applications of geophysics to hydrogeology; aquifer case studies; hydrogeology of the Canadian Shield; hydrogeology of the Great Lakes Basin and St. Lawrence Lowlands; quantitative performance assessment of contaminant remediation; radioactive waste management; and, source water protection. The conference featured more than 320 presentations, of which 35 have been catalogued separately for inclusion in this database. refs., tabs., figs.

  7. Proceedings of GeoEdmonton 2008 : the 61. Canadian geotechnical conference and 9. joint CGS/IAH-CNC groundwater conference : a heritage of innovation

    Energy Technology Data Exchange (ETDEWEB)

    Martin, D. [Alberta Univ., Edmonton, AB (Canada); Skirrow, R. [Alberta Transportation, Edmonton, AB (Canada); Froese, C. [Alberta Geological Survey, Edmonton, AB (Canada)] (comps.) (and others)

    2008-07-01

    This conference provided a forum for more than 500 delegates from industry, government universities and research centres to share their professional knowledge on research and development that affects all sectors of geotechnical engineering, applied geology and hydrogeology. Accomplishments in the geoenvironmental field were also highlighted. The geotechnical sessions were entitled: pile foundations and load testing; excavations and special foundation issues; reinforced soil and soil-structure interactions; advances in modelling, constitutive issues; advances in modelling, consolidation and other applications; advances in modelling, discrete elements and slope stability; embankments and dams; landfills and barriers; fundamental soil mechanics; soil mechanics and ground movement; GIS and remote sensing; landslides and slopes; cone penetration tests and liquefaction assessment; rock mechanics; engineering geology; geoenvironmental sustainability; oilsand and petroleum geomechanics; and, oilsand tailings. The hydrogeology sessions were entitled: paste tailings and cemented paste backfill; acid mine drainage and containment issues; contaminated sites; cold regions; instrumentation, insitu testing and field applications; transportation geotechniques; urban geohazards; staff retention and motivation; geotechnical education for modern practice; regional issues and studies; policy, regulation and conservation; groundwater and development; groundwater and surface water interactions; groundwater and terrain interactions; aquicludes and aquitards; general hydrogeology; and, geochemistry and contaminant hydrogeology. The conference featured more than 250 presentations, of which 42 have been catalogued separately for inclusion in this database. refs., tabs., figs.

  8. Conference summaries. Canadian Nuclear Association 29. annual conference; Canadian Nuclear Society 10. annual conference

    International Nuclear Information System (INIS)

    1989-01-01

    Separate abstracts were prepared for 15 papers from the twenty-ninth Annual Conference of the Canadian Nuclear Association. Abstracts were also prepared for the 102 papers from the tenth Annual Conference of the Canadian Nuclear Society

  9. Conference summaries. Canadian Nuclear Association 29. annual conference; Canadian Nuclear Society 10. annual conference

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-12-31

    Separate abstracts were prepared for 15 papers from the twenty-ninth Annual Conference of the Canadian Nuclear Association. Abstracts were also prepared for the 102 papers from the tenth Annual Conference of the Canadian Nuclear Society.

  10. 6th international conference on case histories in geotechnical engineering August 2008conference report.

    Science.gov (United States)

    2009-01-01

    Due to uncertainty in the nature of soils, a systematic study of the performance of geotechnical structures and its match with predictions is extremely important. Therefore, considerable research effort is being devoted to geotechnical engineering th...

  11. Geotechnical conditions and ice loading for an offshore drilling platform in the Canadian Beaufort Sea

    Energy Technology Data Exchange (ETDEWEB)

    Martens, S.; Eshraghian, A.; Rogers, B. [Klohn Crippen Berger Ltd., Calgary, AB (Canada)

    2009-07-01

    This paper addressed the geotechnical aspects of the deployment of the steel drilling caisson (SDC) at the Paktoa site in the Canadian Beaufort Sea. The SDC is a bottom founded mobile offshore drilling platform that can operate in 8 to 25 m of water in an Arctic environment. It is mated to a submersible barge in order to resist large ice forces on the structure at sites with relatively weak soils, without the need for site preparation. To date, the SDC has been deployed at 8 sites in the Canadian and Alaskan Beaufort Sea. This paper focused on the Paktoa location, where the SDC was deployed 50 km offshore in a water depth of 14 m during the winter of 2005-2006. Geotechnical investigations were conducted from the landfast ice prior to deployment and from the SDC deck. This paper described the soil properties and design loading; design stability; and deformation analysis. The environmental loads considered for the SDC design included ice push, waves and earthquakes. The ice loading was the dominant loading case. The instrumentation installed in the seabed included 2 push-in piezometers and an inclinometer. An ice loading event in February 2006 resulted in considerable displacements in the in-place inclinometer string below the SDC. Several analysis methods were used to estimate the magnitude of the ice load during this event in order to better understand the magnitude of ice loading for future Arctic deployments of gravity based drilling platforms. It was concluded that further deployments should have a minimum of 2 and preferably 4 in-place inclinometer strings to measure real-time deformation of the seabed to enable measurement of rotation of the structure that may occur due to asymmetrical ice loading. 10 refs., 2 tabs., 15 figs.

  12. Conference summaries of the Canadian Nuclear Association 30. annual conference, and the Canadian Nuclear Society 11. annual conference

    International Nuclear Information System (INIS)

    1990-01-01

    This volume contains conference summaries for the 30. annual conference of the Canadian Nuclear Association, and the 11. annual conference of the Canadian Nuclear Society. Topics of discussion include: energy needs and challenges facing the Canadian nuclear industry; the environment and nuclear power; the problems of maintaining and developing industrial capacity; the challenges of the 1990's; programmes and issues for the 1990's; thermalhydraulics; reactor physics and fuel management; nuclear safety; small reactors; fuel behaviour; energy production and the environment; computer applications; nuclear systems; fusion; materials handling; and, reactor components

  13. 7th international conference on case histories in geotechnical engineering.

    Science.gov (United States)

    2013-08-01

    Funding used to enhance objectives of conference and to present successful case histories of varied project, orally, in posters and in : proceedings. This will become a storehouse of knowledge for future reference.

  14. Eastern Canadian Gastrointestinal Cancer Consensus Conference 2016.

    Science.gov (United States)

    Bossé, D; Ng, T; Ahmad, C; Alfakeeh, A; Alruzug, I; Biagi, J; Brierley, J; Chaudhury, P; Cleary, S; Colwell, B; Cripps, C; Dawson, L A; Dorreen, M; Ferland, E; Galiatsatos, P; Girard, S; Gray, S; Halwani, F; Kopek, N; Mahmud, A; Martel, G; Robillard, L; Samson, B; Seal, M; Siddiqui, J; Sideris, L; Snow, S; Thirwell, M; Vickers, M; Goodwin, R; Goel, R; Hsu, T; Tsvetkova, E; Ward, B; Asmis, T

    2016-12-01

    The annual Eastern Canadian Gastrointestinal Cancer Consensus Conference 2016 was held in Montreal, Quebec, 5-7 February. Experts in radiation oncology, medical oncology, surgical oncology, and infectious diseases involved in the management of patients with gastrointestinal malignancies participated in presentations and discussion sessions for the purpose of developing the recommendations presented here. This consensus statement addresses multiple topics: ■ Follow-up and survivorship of patients with resected colorectal cancer■ Indications for liver metastasectomy■ Treatment of oligometastases by stereotactic body radiation therapy■ Treatment of borderline resectable and unresectable pancreatic cancer■ Transarterial chemoembolization in hepatocellular carcinoma■ Infectious complications of antineoplastic agents.

  15. Proceedings of the Canadian Nuclear Society 12. annual conference

    International Nuclear Information System (INIS)

    1991-01-01

    This volume contains the Proceedings of the seventeen Technical Sessions from the Twelfth Annual Conference of the Canadian Nuclear Society held in Saskatoon, Saskatchewan, June 9 to 12, 1991. As in previous years, the Annual Conference of the Canadian Nuclear Society was held in conjunction with the Annual Conference of the Canadian Nuclear Association. The major topics of discussion included: reactor physics; thermal hydraulics; industrial irradiation; computer applications; fuel channel analysis; small reactors; severe accidents; fuel behaviour under accident conditions; reactor components; safety related computer software; nuclear fuel management; nuclear waste management; and, uranium mining processing

  16. Proceedings of the Canadian Nuclear Society 15. annual conference

    International Nuclear Information System (INIS)

    Huynh, H.M.

    1994-01-01

    The proceedings of the 15. annual conference of the Canadian Nuclear Society cover a wide range of nuclear topics, but the emphasis is on CANDU reactors and Canadian experience. The 89 papers are arranged in 17 sessions dealing with the following subjects: thermalhydraulics, fuel channels, operations, reactor physics, fuel, new technology, safety, training, waste management. The individual papers have been abstracted separately

  17. Proceedings of the Canadian Nuclear Society 15. annual conference

    Energy Technology Data Exchange (ETDEWEB)

    Huynh, H M [Hydro-Quebec, Montreal, PQ (Canada)

    1994-12-31

    The proceedings of the 15. annual conference of the Canadian Nuclear Society cover a wide range of nuclear topics, but the emphasis is on CANDU reactors and Canadian experience. The 89 papers are arranged in 17 sessions dealing with the following subjects: thermalhydraulics, fuel channels, operations, reactor physics, fuel, new technology, safety, training, waste management. The individual papers have been abstracted separately.

  18. Proceedings of the seventeenth annual Canadian Nuclear Society conference

    International Nuclear Information System (INIS)

    1996-01-01

    The seventeenth annual conference of the Canadian Nuclear Society, presented in Fredericton, New Brunswick. The conference includes papers on general topics of interest on the nuclear community, waste management and the environment, instrumentation and design of Candu reactors, safety analysis, thermal hydraulics, fuel channels, plant operations and in-core instrumentation

  19. Proceedings of the seventeenth annual Canadian Nuclear Society conference

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    The seventeenth annual conference of the Canadian Nuclear Society, presented in Fredericton, New Brunswick. The conference includes papers on general topics of interest on the nuclear community, waste management and the environment, instrumentation and design of Candu reactors, safety analysis, thermal hydraulics, fuel channels, plant operations and in-core instrumentation.

  20. Proceedings of the Canadian Nuclear Association 35. annual conference

    International Nuclear Information System (INIS)

    Loewer, R.

    1995-01-01

    The proceedings of the thirty-fifth annual conference of the Canadian Nuclear Association contain 22 papers organized in the following sessions: update on the status of the Canadian nuclear industry, non-proliferation and related political issues, nuclear waste disposal perspectives, regulatory issues, trade development, new markets, economics of nuclear electricity, public acceptance or rejection. In addition one paper from a CNA/CNS special session on nuclear diffraction is included. The individual papers have been abstracted separately

  1. Proceedings of the Canadian Nuclear Society sixth annual conference

    International Nuclear Information System (INIS)

    French, P.M.; Phillips, G.J.

    1985-01-01

    The proceedings of the Sixth Annual Conference of the Canadian Nuclear Society comprise 103 papers on the following subjects: fuel technology, nuclear plant safety, instrumentation, public and regulatory matters, fusion, fuel behaviour under normal and accident conditions, nuclear plant design and operations, thermal hydraulics, reactor physics, accelerators, waste management, new reactor concepts

  2. Proceedings of the 29th annual conference of the Canadian Nuclear Association and 10th annual conference of the Canadian Nuclear Society. V. 1-3

    International Nuclear Information System (INIS)

    Harvey, M.; Fehrenbach, P.J.

    1989-01-01

    The symposium was designed to highlight how the technical information for nuclear energy came to Canada, the effect this information had in Canada in the fields of Physics, Chemistry, Medicine and Nuclear Power. Volume 1 is the combined proceedings of the Canadian Nuclear Association twenty-ninth annual conference and the Canadian Nuclear Society tenth annual conference. Volume 2 is the proceedings of the Canadian Nuclear Association twenty-ninth annual conference, and volume 3 is the proceedings of the Canadian Nuclear Society tenth annual conference

  3. Proceedings of the 29th annual conference of the Canadian Nuclear Association and 10th annual conference of the Canadian Nuclear Society. V. 1-3

    Energy Technology Data Exchange (ETDEWEB)

    Harvey, M; Fehrenbach, P J [eds.

    1990-12-31

    The symposium was designed to highlight how the technical information for nuclear energy came to Canada, the effect this information had in Canada in the fields of Physics, Chemistry, Medicine and Nuclear Power. Volume 1 is the combined proceedings of the Canadian Nuclear Association twenty-ninth annual conference and the Canadian Nuclear Society tenth annual conference. Volume 2 is the proceedings of the Canadian Nuclear Association twenty-ninth annual conference, and volume 3 is the proceedings of the Canadian Nuclear Society tenth annual conference.

  4. Proceedings of the Canadian Nuclear Association 34. annual conference

    International Nuclear Information System (INIS)

    Girard, A.M.

    1994-01-01

    The proceedings of the thirty-fourth annual conference of the Canadian Nuclear Association contain 23 complete papers and three speeches organized in the following sessions: opening, plenary, new environmental regulations and their effect on the energy industry, CANDU update, life cycle management of nuclear power plants, evolution of nuclear technology, technologies for tomorrow, nuclear used fuel and disposal of low-level waste, world economics and energy consumption. The complete papers have been abstracted separately

  5. Proceedings of the Canadian Nuclear Association 34. annual conference

    Energy Technology Data Exchange (ETDEWEB)

    Girard, A M [Atomic Energy of Canada Ltd., Montreal, PQ (Canada). CANDU Operations

    1994-12-31

    The proceedings of the thirty-fourth annual conference of the Canadian Nuclear Association contain 23 complete papers and three speeches organized in the following sessions: opening, plenary, new environmental regulations and their effect on the energy industry, CANDU update, life cycle management of nuclear power plants, evolution of nuclear technology, technologies for tomorrow, nuclear used fuel and disposal of low-level waste, world economics and energy consumption. The complete papers have been abstracted separately.

  6. 13th Conference of the Canadian Number Theory Association

    CERN Document Server

    Alaca, Şaban; Williams, Kenneth

    2015-01-01

    The theory of numbers continues to occupy a central place in modern mathematics because of both its long history over many centuries as well as its many diverse applications to other fields such as discrete mathematics, cryptography, and coding theory. The proof by Andrew Wiles (with Richard Taylor) of Fermat’s last theorem published in 1995 illustrates the high level of difficulty of problems encountered in number-theoretic research as well as the usefulness of the new ideas arising from its proof. The thirteenth conference of the Canadian Number Theory Association was held at Carleton University, Ottawa, Ontario, Canada from June 16 to 20, 2014. Ninety-nine talks were presented at the conference on the theme of advances in the theory of numbers. Topics of the talks reflected the diversity of current trends and activities in modern number theory. These topics included modular forms, hypergeometric functions, elliptic curves, distribution of prime numbers, diophantine equations, L-functions, Diophantine app...

  7. Proceedings of the Canadian Solar Buildings Conference : the 31. annual conference of the Solar Energy Society of Canada Inc. and the 1. Canadian Solar Buildings Research Network conference

    International Nuclear Information System (INIS)

    Athienitis, A.; Charron, R.; Karava, P.; Stylianou, M.; Tzempelikos, A.

    2006-01-01

    The first conference organized by the newly established Canadian Solar Buildings Research Network (SBRN) was held in conjunction with the thirty-first annual conference of the Solar Energy Society of Canada Inc (SESCI). The conference was attended by top researchers from 10 Canadian Universities to promote innovative research and development in solar energy applications and to advance the awareness of solar energy in Canada. It featured special events such as trade shows, photovoltaic workshops, a course in ESP-r simulation, tours of solar houses and other events focused on the economic, environmental and socio-economic benefits of solar technology, including the potential to reduce greenhouse gas emissions. SBRN was founded on the premise that university researchers should focus on solar energy applications for buildings. Several presentations proposed action plans to accelerate the implementation of solar energy through the use of innovative building technologies and sustainable energy policies. Other major issues of interest were also discussed, including the development of the net-zero energy solar home and grid-connection issues. The sessions of the conference were entitled: solar thermal systems; solar electricity; building integrated photovoltaic systems; design issues and tools; integrating PV and solar thermal in buildings; daylighting and solar radiation modeling; fenestration and shading; PV manufacturing and solar electricity resources. The proceedings featured 41 refereed papers and 13 poster presentations, all of which have been catalogued separately for inclusion in this database. refs., tabs., figs

  8. Epigenetics, eh! A meeting summary of the Canadian Conference on Epigenetics.

    Science.gov (United States)

    Rodenhiser, David I; Bérubé, Nathalie G; Mann, Mellissa R W

    2011-10-01

    In May 2011, the Canadian Conference on Epigenetics: Epigenetics Eh! was held in London, Canada. The objectives of this conference were to showcase the breadth of epigenetic research on environment and health across Canada and to provide the catalyst to develop collaborative Canadian epigenetic research opportunities, similar to existing international epigenetic initiatives in the US and Europe. With ten platform sessions and two sessions with over 100 poster presentations, this conference featured cutting-edge epigenetic research, presented by Canadian and international principal investigators and their trainees in the field of epigenetics and chromatin dynamics. An EpigenART competition included ten artists, creating a unique opportunity for artists and scientists to interact and explore their individual interpretations of this scientific discipline. The conference provided a unique venue for a significant cross-section of Canadian epigenetic researchers from diverse disciplines to meet, interact, collaborate and strategize at the national level.

  9. Proceedings of the 32. annual conference of the Canadian Nuclear Association

    International Nuclear Information System (INIS)

    1992-01-01

    The conference proceedings comprise 34 papers, arranged under the following sessions: Plenary; The international CANDU program; Canadian used fuel management program; Public information advocates; Fuel and electricity supply; In which direction should reactors advance?; Canadian advanced nuclear research programs; International cooperation in operations; Safety in design, operation, regulation; Renovation of operating stations; CNS/CNA luncheon addresses. The individual papers have been abstracted separately

  10. CRV 2008: Fifth Canadian Conference on Computerand Robot Vision, Windsor, ON, Canada, May 2008

    DEFF Research Database (Denmark)

    Fihl, Preben

    This technical report will cover the participation in the fifth Canadian Conference on Computer and Robot Vision in May 2008. The report will give a concise description of the topics presented at the conference, focusing on the work related to the HERMES project and human motion and action...

  11. Geotechnical properties of rock

    Energy Technology Data Exchange (ETDEWEB)

    Jackson, R.; Gorski, B.; Gyenge, M.

    1995-12-31

    The manual is a compilation of the geotechnical properties of many types of rock that are typical of Canadian mining environments. Included are values for density, porosity, compressive and shear wave velocity, uniaxial compressive strength, Young`s modulus, and Poisson`s ratio. The data base contains material constants that were determined using the Hoek and Brown failure criteria for both before and after failure conditions. 76 data sheets of rock properties in Canadian mines are included. 7 refs., 85 figs., 3 tabs.

  12. Nuclear the next generation. 34th Annual Canadian Nuclear Society conference and 37th CNS/CNA student conference

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-07-01

    The 34th Annual Canadian Nuclear Society Conference and 37th CNS/CNA Student Conference was held in Toronto, Ontario, Canada on June 10-13, 2013. With the theme of the conference, 'Nuclear the Next Generation{sup ,} the conference actively engaged 400 participants in the many facets of this well-rum event. The conference combined excellent plenary speakers, a full set of technical papers, challenging student poster competitions, and interesting exhibits. The plenary session focussed on the themes: 'Nuclear Power - a Business Driver for the Next Generation'; and, 'Designing - the Next Generation'. The technical session titles were: Reactor and Radiation Physics; Environment and Spent Fuel Management; Operations and Maintenance; Fusion Science and Technology; Advanced Reactors and Fuels; Plant Life Extension, Refurbishment and Aging; Safety and Licensing; Chemistry and Materials; and, Thermalhydraulics. The student conference session was well attended and completed the 4 day event.

  13. Proceedings of the 11th Annual Conference of the Canadian Nuclear Society

    International Nuclear Information System (INIS)

    Rouben, B.

    1990-01-01

    This volume contains the proceedings of the thirteen technical sessions at the 11. annual conference of the Canadian Nuclear Society. The 68 papers presented at this conference cover the areas of programmes and issues for the 90's; thermalhydraulics; reactor physics and fuel management; nuclear safety; small reactors; fuel behaviour; energy production and the environment; computer applications; nuclear systems; fusion; reactor decommissioning, irradiated fuel and materials handling; and reactor components, (L.L.)

  14. Workshop 1: Geosynthetics in Transportation Geotechnics

    OpenAIRE

    Tatsuoka, Fumio; Zornberg, Jorge; Machado do Vale, José Luís; Neves, José

    2016-01-01

    This book contains the extended abstracts of the Workshop 1 - Geosynthetics in Transportation Geotechnics - of the 3rd International Conference on Transportation Geotechnics, 4-7 September 2016, Guimarães, Portugal. The main goals of the workshop were: state-of-the-art of the use of geosynthetics in transportation geotechnics; theory and research of geosynthetics engineering for transportation engineering; key issues in practice; and perspective.

  15. Proceedings of the Canadian Nuclear Association 25th annual conference

    International Nuclear Information System (INIS)

    1985-01-01

    The twenty addresses presented in this volume celebrate the 25th anniversary of the Canadian Nuclear Association. They reflect upon evolving world electricity patterns, the nuclear power option, Canada's position as a supplier of uranium and nuclear technology, the future of the nuclear industry in Canada, and the position of the industry in the United States and Britain

  16. Proceedings of the 30. Annual Conference of the Canadian Nuclear Association

    International Nuclear Information System (INIS)

    Burroughs, P.

    1990-01-01

    The nineteen papers presented at this conference discuss the energy needs and challenges facing the Canadian nuclear industry, the environment and nuclear power, the problems of maintaining and developing industrial capacity, and the challenges of the 1990's. (L.L.)

  17. Proceedings of the 13. annual conference of the Canadian Nuclear Society. V. 1

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-31

    Volume 1 of the proceedings of the 13. annual conference of the Canadian Nuclear Society includes sessions on the following topics: reactor physics, new concepts and technology, fuel behaviour, reactor design, safety analysis, fuel channel behaviour, equipment and design qualification. The individual papers have been abstracted separately.

  18. Canadian Consensus Conference on the Management of Gastroesophageal Reflux Disease in Adults – Update 2004

    Directory of Open Access Journals (Sweden)

    David Armstrong

    2005-01-01

    Full Text Available BACKGROUND: Gastroesophageal reflux disease (GERD is the most prevalent acid-related disorder in Canada and is associated with significant impairment of health-related quality of life. Since the last Canadian Consensus Conference in 1996, GERD management has evolved substantially.

  19. Nuclear at Niagara. 32nd Annual Canadian Nuclear Society conference and 35th CNS/CNA student conference

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    The 32nd Annual Canadian Nuclear Society Conference and 35th CNS/CNA Student Conference was held in Niagara Falls, Ontario, Canada on June 5-8, 2011. The theme of the conference, 'Nuclear at Niagara', brought together scientists, engineers, technologists, senior management, government officials, and students interested in all aspects of nuclear science and technology and its applications, including nuclear power generation, fuel production, uranium mining and refining, management of radioactive wastes and used fuel. Other topics include medical and industrial uses of radionuclides, occupational and environmental radiation protection, the science and technology of nuclear fusion, and associated activities in research and development. and applications of energy from the atom. The central objective of this conference was to exchange views on how nuclear science and technology can best serve the needs of humanity, now and in the future. Over 400 delegates from across Canada and other nuclear countries were in attendance.

  20. Nuclear at Niagara. 32nd Annual Canadian Nuclear Society conference and 35th CNS/CNA student conference

    International Nuclear Information System (INIS)

    2011-01-01

    The 32nd Annual Canadian Nuclear Society Conference and 35th CNS/CNA Student Conference was held in Niagara Falls, Ontario, Canada on June 5-8, 2011. The theme of the conference, 'Nuclear at Niagara', brought together scientists, engineers, technologists, senior management, government officials, and students interested in all aspects of nuclear science and technology and its applications, including nuclear power generation, fuel production, uranium mining and refining, management of radioactive wastes and used fuel. Other topics include medical and industrial uses of radionuclides, occupational and environmental radiation protection, the science and technology of nuclear fusion, and associated activities in research and development. and applications of energy from the atom. The central objective of this conference was to exchange views on how nuclear science and technology can best serve the needs of humanity, now and in the future. Over 400 delegates from across Canada and other nuclear countries were in attendance.

  1. Proceedings of the Canadian Nuclear Society 7. annual conference

    International Nuclear Information System (INIS)

    1986-01-01

    This conference had as its major topics of coverage: fuel and fuel channel materials, reactor physics and radiation, safety and the environment, fusion, thermohydraulics, economic and social issues and operations

  2. Nuclear energy: a world of service to humanity. 27th annual conference of the Canadian Nuclear Society and 30th Canadian Nuclear Society/Canadian Nuclear Association student conference

    International Nuclear Information System (INIS)

    2006-01-01

    The 27th Annual conference of the Canadian Nuclear Society was held on June 11-14, 2006 in Toronto, Ontario, Canada. The conference gathered close to 400 scientists, engineers, technologists and students interested in all aspects and applications of energy from the atom. The central objective of this conference was to provide a forum for exchange of views on how this technical enterprise can best serve the needs of humanity, now and in the future. The plenary sessions addressed broad industrial and commercial developments in the field. Over eighty papers were presented in 15 technical sessions on the following topics: safety analysis; plant refurbishment; control room operation; nuclear chemistry and materials; advanced reactor design; plant operation; reactor physics; safety analysis; nuclear instrumentation; and, nuclear general topics. Embedded in the conference was the 30th student conference, sponsored by the Canadian Nuclear Society and the Canadian Nuclear Association. Over thirty-five papers were presented in five sessions on the following topics: corrosion processes; control systems / physics / modelling; and, chemistry / chemical engineering

  3. Abstracts of the 47. Canadian chemical engineering conference

    International Nuclear Information System (INIS)

    1997-01-01

    Chemical engineering and its role in the development of Western Canada's oil sands and heavy oil reserves was the main focus of this conference. The presentations revolved around the theme, 'The Competitive Advantage'. Features of the conference included strong participation by industry, professional development courses, and government. Energy-related sessions were entitled: (1) oil and bitumen recovery, (2) bitumen extraction and froth treatment, (3) bitumen upgrading, (4) in-situ recovery and enhanced oil recovery, (5) air quality, (6) cracking and hydrogenation, and (7) sulfur recovery and gas processing

  4. Forensic geotechnical engineering

    CERN Document Server

    Babu, GL

    2016-01-01

    In this edited volume on advances in forensic geotechnical engineering, a number of technical contributions by experts and professionals in this area are included. The work is the outcome of deliberations at various conferences in the area conducted by Prof. G.L. Sivakumar Babu and Dr. V.V.S. Rao as secretary and Chairman of Technical Committee on Forensic Geotechnical Engineering of International Society for Soil Mechanics and Foundation Engineering (ISSMGE). This volume contains papers on topics such as guidelines, evidence/data collection, distress characterization, use of diagnostic tests (laboratory and field tests), back analysis, failure hypothesis formulation, role of instrumentation and sensor-based technologies, risk analysis, technical shortcomings. This volume will prove useful to researchers and practitioners alike.

  5. Papers of a Canadian Institute conference : Managing energy price risk

    International Nuclear Information System (INIS)

    2003-01-01

    During this conference, participants were offered an opportunity to broaden their knowledge on fundamentals and technical risk management. In particular, the presentations addressed topics such as: the assessment and evaluation of risk tolerance and risk management options within an organization; the tightening of risk management procedures and policies; the measurement and monitoring of risk portfolio and value at risk; the efficient trading of structured energy products; and the use of call and put options, collars and straddles, swaps and other energy related derivatives. The participants also benefited from the use of case studies, panels and tutorials conducted by energy buyers, sellers and risk management experts. The conference represented a forum where participants discussed strategies and tactics for pricing, hedging and trading energy risk in deregulated markets. Of the thirteen presentations included in this document, four were included in this database. refs., tabs., figs

  6. Proceedings of the Canadian Nuclear Society ninth annual conference, 1988

    International Nuclear Information System (INIS)

    1988-01-01

    The 74 papers presented at this conference covered the following topics: operational enhancements of existing nuclear power plants; design of small reactors; accident behaviour in CANDU reactor fuel channels; fuel storage and waste management; reactor commissioning and decommissioning; nuclear safety experiments and modelling; the next generation of CANDU reactors; advances in nuclear engineering education in Canada; safety of small reactors; current position and improvements of fuel channels; current issues in nuclear safety; and, medical and industrial radiation applications

  7. Proceedings of the Canadian Nuclear Association 26. annual conference

    International Nuclear Information System (INIS)

    1986-01-01

    The conference is being held near an imposing array of some of the world's finest nuclear reactors but in a climate for nuclear energy that poses considerable challenge for the future. Recent events at Chernobyl have deflected public attention from the reality that nuclear energy from CANDU reactors is the safest, cleanest and most economic energy option available in several parts of our country. One might well ask 'Will the Chernobyl accident result in a serious long term set-back to global recognition of the need for nuclear power?' Technically it shouldn't do so but politically it may unless the industry takes an innovative and aggressive stand towards providing the necessary assurances to the public of the excellence and safety of well designed reactors such as CANDU. The them of this conference is 'Innovation Leads the Way'. During the next two day we will hear about and discuss innovations in our activities ranging all the way from scientific, technological and market development to the concluding session on what we must now do to dissipate the cloud of Chernobyl. 'Innovation Leads the Way' is a provocative title. We all know what innovation means --changing for the better -- finding new and better ways of doing things. But where are we going? Are we innovative enough to find our way? Exploring the answers to these questions is what this conference is all about. We are seeking the way not only to maintain but to improve the world class performance of our many-facetted industry and the contribution which it can make to meeting the world's energy needs. The process should be assisted through the meaningful communication we will all engage in with friends and colleagues during these next few days. If there is one lesson the nuclear industry world-wide has learned from the events of the past few weeks it is the need for international cooperation and exchange of knowledge and information

  8. On the path to translation: Highlights from the 2010 Canadian Conference on Ovarian Cancer Research

    Directory of Open Access Journals (Sweden)

    Thériault Brigitte L

    2011-06-01

    Full Text Available Abstract Ovarian cancer continues to be the most lethal of the gynaecologic malignancies due to the lack of early detection, screening strategies and ineffective therapeutics for late-stage metastatic disease, particularly in the recurrent setting. The gathering of researchers investigating fundamental pathobiology of ovarian cancer and the clinicians who treat patients with this insidious disease is paramount to meeting the challenges we face. Since 2002, the Canadian Conference on Ovarian Cancer Research, held every two years, has served this essential purpose. The objectives of this conference have been to disseminate new information arising from the most recent ovarian cancer research and identify the most pressing challenges we still face as scientists and clinicians. This is best accomplished through direct encounters and exchanges of innovative ideas among colleagues and trainees from the realms of basic science and clinical disciplines. This meeting has and continues to successfully facilitate rapid networking and establish new collaborations from across Canada. This year, more guest speakers and participants from other countries have extended the breadth of the research on ovarian cancer that was discussed at the meeting. This report summarizes the key findings presented at the fifth biennial Canadian Conference on Ovarian Cancer Research held in Toronto, Ontario, and includes the important issues and challenges we still face in the years ahead to make a significant impact on this devastating disease.

  9. Abstracts of Go-Expo 2003 : Gas and oil exposition and Canadian international petroleum conference 2003

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    The Go-Expo 2003 gas and oil exposition, held in conjunction with the Canadian international petroleum conference, showcased some of the newest technologies, products and services available to the petroleum industry. The more than 30 presentations featured case studies on new technologies pertaining to exploration, drilling and production, environmental strategies, information technology and e-commerce. The presenters represented academia, industry, as well as provincial and territorial governments. Some of the topics discussed included: coalbed methane drilling procedures, upgrading processes, in-line separation techniques, reducing emissions under the Kyoto Protocol, safety and pollution prevention in the industry, water abatement in gas wells, and integrated crisis management.

  10. Papers of the Canadian Institute conference: Reduction, management and trading of greenhouse gas emissions

    International Nuclear Information System (INIS)

    2003-01-01

    This conference provided an opportunity for experts from various fields to discuss and exchange views and the latest information on a wide range of topics related to the reduction, management and trading of greenhouse gas emissions. The papers dealt with pertinent issues such as: (1) short and long term impacts of the Kyoto Protocol ratification for industries operating in Quebec, necessary changes and required investment, (2) calculation mechanisms for the allocation of permits, audit systems for the reduction and registration of emissions, (3) Canadian and international emission trading market, opportunities and associated risks, (4) preparation of an emission trading contract, (5) the establishment of a greenhouse gas (GHG) emission reduction and management system within companies, and (6) measures implemented by governments to assist industry in meeting emission reduction targets. Of the sixteen papers presented at the conference, 4 have been processed separately for inclusion in this database. refs., tabs., figs

  11. Proceedings of the Canadian Wind Energy Association's 2010 annual conference and exhibition

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    The wind power industry is now experiencing rapid growth in many of the developed countries who seek to expand their renewable energy portfolios and reduce harmful emissions into the atmosphere. The annual Canadian Wind Energy Association (CanWEA) conference and exhibition provides a forum for members of the wind power industry as well as various other experts and stakeholders to exchange information and to discuss innovations and technologies designed to increase wind power capacity in Canada. The environmental impacts of wind turbines were examined, as well as some of the issues that are currently inhibiting growth of the wind power industry. New construction and operational strategies were presented. Business approaches for ensuring adequate investment in the industry were reviewed, and recommendations for government regulations and renewable energy investment incentives were provided. Advances in forecasting were outlined, and issues currently influencing the electric power industry in relation to wind power, reliability, and growth were also discussed. Methods of ensuring the reliability and safety of turbines in the event of icing and other meteorological events were also presented. The conference was divided into the following 5 tracks over a 3 day period: (1) project assessment, (2) project development, (3) business development, (4) technical, and (5) small wind. Each track was further sub-divided into sessions that covered a range of topics. Twenty-nine presentations were included in a poster session. The conference featured 118 presentations, of which 108 have been catalogued separately for inclusion in this database. refs., tabs.

  12. Proceedings of the Canadian Wind Energy Association's 2010 annual conference and exhibition

    International Nuclear Information System (INIS)

    2010-01-01

    The wind power industry is now experiencing rapid growth in many of the developed countries who seek to expand their renewable energy portfolios and reduce harmful emissions into the atmosphere. The annual Canadian Wind Energy Association (CanWEA) conference and exhibition provides a forum for members of the wind power industry as well as various other experts and stakeholders to exchange information and to discuss innovations and technologies designed to increase wind power capacity in Canada. The environmental impacts of wind turbines were examined, as well as some of the issues that are currently inhibiting growth of the wind power industry. New construction and operational strategies were presented. Business approaches for ensuring adequate investment in the industry were reviewed, and recommendations for government regulations and renewable energy investment incentives were provided. Advances in forecasting were outlined, and issues currently influencing the electric power industry in relation to wind power, reliability, and growth were also discussed. Methods of ensuring the reliability and safety of turbines in the event of icing and other meteorological events were also presented. The conference was divided into the following 5 tracks over a 3 day period: (1) project assessment, (2) project development, (3) business development, (4) technical, and (5) small wind. Each track was further sub-divided into sessions that covered a range of topics. Twenty-nine presentations were included in a poster session. The conference featured 118 presentations, of which 108 have been catalogued separately for inclusion in this database. refs., tabs.

  13. Proceedings of the Canadian Nuclear Association 28. annual conference held in Winnipeg, Manitoba, June 12-15, 1988

    International Nuclear Information System (INIS)

    1988-01-01

    The proceedings of the 28. CNA (Canadian Nuclear Association) conference contain 28 papers under the following headings: power reactors; fuel cycles; nuclear power and public understanding; future trends; and, applications of nuclear technology. CANDU reactors are emphasized. The individual papers have been abstracted separately

  14. Conference Scene: epigenetics eh! The first formal meeting of the Canadian epigenetics community.

    Science.gov (United States)

    Underhill, Alan; Hendzel, Michael J

    2011-08-01

    In recognition of Canada's longstanding interest in epigenetics - and a particular linguistic interjection - the inaugural 'Epigenetics, Eh!' conference was held between 4-7 May 2011 in London, Ontario. The meeting struck an excellent balance between Canadian and international leaders in epigenetic research while also providing a venue to showcase up-and-coming talent. Almost without exception, presentations touched on the wide-ranging and severe consequences of epigenetic dysfunction, as well as current and emerging therapeutic opportunities. While gaining a deeper understanding of how DNA and histone modifications, together with multiple classes of ncRNAs, act to functionalize our genome, participants were also provided with a glimpse of the astounding complexity of chromatin structure, challenging existing dogma.

  15. International Conference on Case Histories in Geotechnical Engineering (2nd) Held in Rolla, Missouri on 1-5 June 1988. Volume 2

    Science.gov (United States)

    1989-06-30

    approaches acere in the process of evolution. Cases of construction during surcharge loading. It is postulated reprrted inclde projects ahere the behaviour...unreinforced fill slopes. I.E.M. - ,ISSMFE Joint Sympnsium on Geotechnical Su-h tecnniriues ha;e been used in many Problems: 90-111, Kuala Lumpur, Malaysia

  16. Embracing the future: Canada's nuclear renewal and growth. 28th annual conference of the Canadian Nuclear Society and 31st CNS/CNA student conference

    International Nuclear Information System (INIS)

    2007-01-01

    The 28th Annual Conference of the Canadian Nuclear Society and 31st CNS/CNA Student Conference was held on June 3-6, 2007 in Saint John, New Brunswick. The central objective of this conference was to provide a forum for exchange of views on how this technical enterprise can best serve the needs of humanity, now and in the future. 'Embracing the Future: Canada's Nuclear Renewal and Growth' was the theme for this year's gathering of nuclear industry experts from across Canada and around the world. This theme reflects the global renaissance of interest in nuclear technology, strongly evident here in Canada through plant refurbishments (underway and planned), new-build planning, renewal and expansion of the nuclear workforce, and growth in public support for environmentally sustainable technology. Topics for discussion at this conference include: the nuclear renaissance in Canada and around the world, recent developments at Canadian utilities, status of plant refurbishment and new build plans, and uranium supply issues. For business, energy, and science reporters this conference offers an insight into major nuclear projects and an opportunity to meet leaders in the nuclear sector. Over 100 technical papers were presented, as well as over 20 student papers, in the following sessions: control room operation; safety analyses; environment and waste management; plant life management and refurbishment; reactor physics; advanced reactor design; instrumentation control; general nuclear topics and standards; chemistry and materials; probabilistic safety assessment; and, performance improvement

  17. A Breath of Fresh Air / Une boufée d’air frais: Abstracts from the 2012 Canadian Respiratory Conference

    Directory of Open Access Journals (Sweden)

    Pearce Wilcox

    2012-01-01

    Full Text Available The present online supplement highlights the poster abstracts selected for presentation at the 5th Annual Canadian Respiratory Conference (CRC held in Vancouver, British Columbia, in April 2012. The CRC is a partnership initiative of the Canadian Thoracic Society, Canadian Respiratory Health Professionals, The Lung Association and the Canadian COPD Alliance and has become the premiere national educational and scientific meeting for the respiratory community in Canada. I would like to acknowledge the leadership and expertise of the Scientific Committee, our conference speakers and abstract presenters, all of whom contributed to the delivery of an excellent program. The next Canadian Respiratory Conference will be held in Québec City, Quebec, April 11 to 13, 2012 (www.lung.ca/crc. We look forward to seeing you there!

  18. Proceedings of APPrO 2005, the 17. annual Canadian power conference and trade show : making the pieces fit

    International Nuclear Information System (INIS)

    Brooks, J.

    2006-01-01

    The Canadian power conference and trade show is one of the leading conferences in the Ontario electricity sector. It examines how Ontario plans to build or replace power capacity following a path for new generation, based on both renewable and conventional sources. The current implementation of new generation and prospects for future expansion were discussed along with supply and demand issues. Topics of discussion focused on the Ontario electricity market and what is perceived by industry representatives to be the elements that need to be improved. The best structure for the industry and the degree of government involvement to meet future demand was discussed. The green power conference, which was run concurrently with this event, focused on renewable energy sources and zero greenhouse gas emission technologies. Eight sessions from the conference were indexed separately for inclusion in this database. tabs., figs

  19. Papers presented by A.E.C.L. to the International Conference of the Canadian Nuclear Association

    International Nuclear Information System (INIS)

    1964-06-01

    The International Conference of the Canadian Nuclear Association was held in Toronto, Ontario, Canada on May 25-27, 1964. There were six papers presented by Atomic Energy of Canada Limited. The titles were: I. Canada - A Nuclear Power Plant Supplier, by J.L. Gray; II. Nuclear Power Development in Canada and Other Countries, by W.B. Lewis; III. The Development and Some Applications of Cobalt-60 Irradiators, by R.F. Errington; IV. The Definition and Achievement of Development Targets for the Canadian Power Reactor Program, by A.J. Mooradian; V. Recent Applications of Tracers in the Physical Sciences in Canada, by R.H. Betts and J.A. Davies; and, VI. Economic Comparison of Oyster Creek, Nine Mile Point and CANDU-type Stations under Canadian Conditions, by G.A. Pon and R.L. Beck.

  20. Interim geotechnical data report

    International Nuclear Information System (INIS)

    1986-01-01

    This issue, the Interim Geotechnical Field Data Report, presents information obtained from the geotechnical activities at the WIPP site underground facilities since the last quarterly report. It also includes cumulative plots which contain all previous data. Finally, it continues the geotechnical analyses and interpretations of the data. The GFDR is organized into two principal parts. The first part, Geotechnical Field Data, presents in graphical form all the data collected since April 1982 from the geomechanical instruments. Presented in the second part, Evaluation and Analyses, are preliminary interpretations and analyses of the data. In this report, continuing geotechnical assessment of all the facility features is presented. Also included in the second part are separate sections on evaluation and interpretation of the instrumentation measurements, and an updated description and evaluation of observed behavior of the underground openings

  1. Building on our past... building for the future. 33rd Annual Canadian Nuclear Society conference and 36th CNS/CNA student conference

    International Nuclear Information System (INIS)

    2012-01-01

    The 33rd Annual Canadian Nuclear Society Conference and 36th CNS/CNA Student Conference was held in Saskatoon, Saskatchewan, Canada on June 10-13, 2012. With the theme of the conference, 'Building on our Past... Building for the Future', the conference specifically noted the 50th anniversary of the first-nuclear-produced electricity in Canada by the small Nuclear Power Demonstration (NPD) plant on June 4, 1962 and the 60th anniversary of the creation of Atomic Energy of Canada Limited in April 1952. The conference brought together over 360 delegates for the technical sessions with very broad subject matter of: physics, environment and waste management, safety and licensing, life extension, fusion technology, fuel and advanced reactors, reactor materials, uranium mining, I and C process, and, thermalhydraulics. Two plenary sessions focussed on: Small Modular Reactors; and, radioisotopes primarily for medical applications. The student conference was well attended with plenary sessions focussing on: Nuclear Industry Power Developments: The Renaissance; and a panel discussion on the overview of the proposed refurbishment of the Darlington four-unit station.

  2. Sustainable development through nuclear technology : 29th annual conference of the Canadian Nuclear Society and 32nd CNS/CNA student conference

    International Nuclear Information System (INIS)

    2008-01-01

    The 29th Annual Conference of the Canadian Nuclear Society and 32nd CNS/CNA Student Conference on Sustainable Development through Nuclear Technology was held on June 1-4, 2008 in Toronto, Ontario, Canada. The theme of the conference was 'Nuclear Sustainability'. The central objective of this conference was to provide a forum for exchange of views on how this technical enterprise can best serve the needs of humanity, now and in the future. The renewed global interest in nuclear technology is based on a recognition of its potential to meet economic and environmental targets more favourably than competing technologies. Although many of these attractions are short-term in nature, they stem from a broader potential of nuclear technology to drive all aspects of development (social, environmental, economic) in a sustainable in this area. (author) a terial in support of fuel resources themselves. The conference drew a record attendance of over 450 delegates. Over 100 technical papers were presented within 15 technical sessions, as well as over 30 student papers in 5 sessions. The following list of session titles indicates the diversity of the technical papers: advanced reactors; plant and components; process systems; thermalhydraulics; safety and licensing; hydrogen; human factors; physics; instrumentation and control; environment and waste management; and plant operation. (author)

  3. PBNC 2014 : 19th Pacific Basin Nuclear Conference; 38th Annual Student Conference of the Canadian Nuclear Society and Canadian Nuclear Association

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-07-01

    The 19th Pacific Basin Nuclear Conference (PBNC), held in Vancouver, August 24 - 28, 2014, was an outstanding success in all aspects. With the theme 'Fulfilling the Promise of Nuclear Technology Around the Pacific Basin in the 21st Century', it included 46 senior-level presentations, 300 technical papers from countries around the Pacific rim and others, 53 student posters and a number of exhibits from several countries. The venue of Vancouver proved attractive to the large contingent of attendees from the Asian side of the Pacific Ocean, who constituted over a third of the 600 delegates. This years conference: showcased the advancement of nuclear technology in power generation, health science, and environmental stewardship; discussed challenges facing nuclear technology; and highlighted future developments.

  4. Submission to Energy and Mines Ministers Conference by the Canadian Energy Pipeline Association

    International Nuclear Information System (INIS)

    2002-01-01

    Almost all of the oil and natural gas in Canada is transported from supply basins to customers across the country through the critical network operated by the members of the Canadian Energy Pipeline Association (CEPA). More than 50 per cent of the liquid hydrocarbons transported last year were exported to the United States. The issues discussed in this paper are pipeline safety and integrity, landowner relations, climate change, Aboriginal consultation, and economic regulation and taxation. Each of these topics is discussed in detail. CEPA members are working closely with industry partners and their associations in both the United States and Canada, especially so since the events of September 11, as well as with federal and provincial governments in the field of critical infrastructure protection. Landowners agree to the tune of 87 per cent with the statement to the effect that Canadians can trust pipelines to safely transport oil and natural gas products across the country. CEPA members continue to strive to meet the communication and information needs of stakeholders. Climate change poses significant challenges to the industry, which is committed to doing its part to reduce the emissions of greenhouse gases. Consultation with Aboriginals is taking place in the eight provinces and two territories where CEPA members operate. The issues discussed are environmental protection, preservation of cultural and heritage resources, education and training, employment, contracting, and business opportunities. A vital component of the Canadian economy, the pipeline industry improves the quality of life for all Canadians, but the regulators are awarding low rates of return, creating a disadvantage for Canadians in the marketplace. Adjustments in this field are required, in the opinion of CEPA members. The current Capital Cost Allowance (CCA) rate for pipeline compressor assets is an issue that is being defended by CEPA members along with the Canadian Gas Association and

  5. Proceedings of the Canadian Nuclear Society international conference on containment design

    International Nuclear Information System (INIS)

    Black, R.K.

    1984-01-01

    The subject of containment was discussed under the major topic headings of: USA views on containment design operation and regulation, containment structure analysis, containment envelope and energy suppression systems, European views on containment design operation and regulation, containment atmosphere control, Canadian views on containment design operation and regulation, containment analysis, and regulatory requirements, testing, and periodic inspection

  6. Proceedings of the 18. annual Canadian conference on markets for industrial minerals, 2006

    International Nuclear Information System (INIS)

    2006-01-01

    This conference on industrial minerals provided a forum for producers, distributors and consumers to discuss changes in supply and demand patterns. Industrial minerals support a variety of value-added processing plants and industries. The presentations at this conference highlighted industrial mineral production, processing and exploration activity and identified new development opportunities. Industrial minerals were shown to be an increasingly significant component of international trade. Most industrial minerals show steady growth in demand as they open up new development opportunities in a variety of sectors, including well drilling and the oil sands industry. This conference featured 17 presentations, of which 3 have been catalogued separately for inclusion in this database. refs., tabs., figs

  7. Eleventh CERI [Canadian Energy Research Inst.] international oil and gas markets conference

    International Nuclear Information System (INIS)

    1992-01-01

    At a conference on international oil and gas markets, papers were presented on world oil and gas markets; energy policies; regulatory policies; supply and demand scenarios; environmental issues; the markets and industries in individual countries such as the former Soviet Union, USA, Canada, and the United Kingdom; business strategies; geopolitics of energy; and coalbed methane supplies. Separate abstracts have been prepared for 22 papers from this conference

  8. The tenth CERI [Canadian Energy Research Institute] international oil and gas markets conference

    International Nuclear Information System (INIS)

    1991-01-01

    At a conference on oil and gas markets, papers were presented on oil market instability and its impact on economic development, international energy policy, oil supply and demand, natural gas liquids sales, world gas trade, gas markets in Europe and Asia, petroleum industry activities and their relation to government, oil refining and product market developments, and the North American natural gas market. Separate abstracts have been prepared for 25 papers from this conference

  9. Abstracts from the 7th Canadian Conference on Dementia (CCD) held in Vancouver, October 2013

    OpenAIRE

    Montgomery, S.; Wangsgaard, J.; Koenig, J.; Jeremy,; Pathak, K.; Jude, A.; Davidson, S.; Rice, J.; Cytryn, K.N.; Lungu, O.; Voyer, P.; Wilchesky, M.; Qian, W.; Schweizer, T.; Fischer, C.

    2013-01-01

    Background/Purpose: As of 2011, approximately 747,000 Canadians suffer from some form of dementia; Alzheimer?s disease (AD) is one such form. AD is a neurodegenerative disease characterized by significant neuronal death. Neuronal death has been associated with two pathophysiological features: 1) neurofibrillary tangles within the neurons, and 2) amyloid beta plaque formation between neurons. Excessive production of these two features is manifested by severe cognitive impairment. One of the mo...

  10. Proceedings of the Canadian Nuclear Society 2. international conference on radioactive waste management

    International Nuclear Information System (INIS)

    1986-01-01

    These proceedings contain 136 papers on waste management from 19 countries. An index of the delegates and their affiliations is included. Emphasis was laid on the Canadian program for geologic disposal in hard rock. Sessions dealt with the following: storage and disposal, hydrogeology and geochemistry, transportation, buffers and backfill, public attitudes, tailings, site investigations and geomechanics, concrete, economics, licensing, matrix materials and container design, durability of fuel, biosphere modelling, radioactive waste processing, and future options

  11. Atoms for Power, Health and the Environment. 31st annual conference of the Canadian Nuclear Society and 34th annual conference of the Canadian Nuclear Society and Canadian Nuclear Association

    International Nuclear Information System (INIS)

    2010-01-01

    The 31st Annual Conference of the CNS and 34th Annual Student Conference of the CNS and CNA was held in Montreal, Quebec, Canada on May 24-27, 2010. The theme of the conference, 'Atoms for Power, Health, and the Environment', brought together scientists, engineers, technologists and students interested in all aspects and applications of energy from the atom. The central objective of this conference was to provide a forum for exchange of views on how this technical enterprise can best serve the needs of humanity, now and in the future. There were over 400 attendees and more than 100 technical papers, as well as plenary sessions that addressed broad industrial and commercial developments in the field.

  12. Abstracts of the Canadian Society for Civil Engineering annual conference including the general conference, the 1. international structural specialty conference, the 1. international construction specialty conference, and the 1. specialty conference on disaster mitigation : towards a sustainable future

    International Nuclear Information System (INIS)

    El-Badry, M.; Loov, R.E.; Ruwanpura, J.; El-Hacha, R.; Kroman, J.; Rankin, J.

    2006-01-01

    This conference provided a forum for national and international practicing engineers, researchers and technical experts to discuss sustainable solutions to infrastructure development. Discussions focused on recent developments in new technologies for building more economic and sustainable infrastructure, while improving the safety of buildings, bridges, roads, water supply and sewage treatment systems. The conference was held in conjunction with associated specialty conferences, including a first international structures specialty conference, a first international construction specialty conference, and a first specialty conference on disaster mitigation. This book of abstracts highlights all the specialty conferences and accompanies a CD-ROM that has the full text of all the papers. Manuscripts of the full papers submitted to the specialty conferences were peer-reviewed by international scientific committees. The general conference provided a forum to learn about new technologies and future directions in various areas of civil engineering. It included a special theme session on sustainable development and a special session on innovation and information technology. Other technical sessions focused on topics such as civil engineering history and education; infrastructure management and renewal; asset management; risk assessment and management; engineering materials and mechanics; environmental engineering and science; hydrotechnical engineering; cold region engineering; and, transportation engineering. The general conference featured 88 presentations, of which 15 have been catalogued separately for inclusion in this database

  13. The Management of Chronic Viral Hepatitis: A Canadian Consensus Conference 2004

    Directory of Open Access Journals (Sweden)

    Morris Sherman

    2004-01-01

    Full Text Available Several government and nongovernment organizations held a consensus conference on the management of acute and chronic viral hepatitis to update previous management recommendations. The conference became necessary because of the introduction of new forms of therapy for both hepatitis B and hepatitis C. The conference issued recommendations on the investigation and management of chronic hepatitis B, including the use of lamivudine, adefovir and interferon. The treatment of hepatitis B in several special situations was also discussed. There were also recommendations on the investigation and treatment of chronic hepatitis C and hepatitis C-HIV coinfection. In addition, the document makes some recommendations about the provision of services by provincial governments to facilitate the delivery of care to patients with hepatitis virus infection. The present document is meant to be used by practitioners and other health care providers, including public health staff and others not directly involved in patient care.

  14. Canadian Wind Energy Association small wind conference proceedings : small wind policy developments (turbines of 300 kW or less)

    International Nuclear Information System (INIS)

    2005-01-01

    The small wind session at the Canadian Wind Energy Association's (CanWEA) annual conference addressed policies affecting small wind, such as net metering, advanced renewable tariffs and interconnections. It also addressed CanWEA's efforts in promoting small wind turbines, particularly in remote northern communities, small businesses and within the residential sector. Small wind systems are typically installed in remote communities to offset utility supplied electricity at the retail price level. In certain circumstances, small wind and hybrid systems can produce electricity at less than half the cost of traditional electricity sources, which in remote communities is typically diesel generators. Small wind turbines require different materials and technologies than large wind turbines. They also involve different local installation requirements, different by-laws, tax treatment and environmental assessments. Small wind turbines are typically installed for a range of factors, including energy independence, energy price stability and to lower environmental impacts of traditional power generation. The small wind session at the conference featured 14 presentations, of which 4 have been catalogued separately for inclusion in this database. tabs., figs

  15. Proceedings of the Canadian Urban Transit Association Annual Conference 2001 : Sailing Toward New Horizons. CD-ROM ed.

    International Nuclear Information System (INIS)

    2001-01-01

    The Annual Canadian Urban Transit Association Conference attracted speakers from both Canada and the United States. The topics discussed during the 17 sessions fell in the broad categories of smart growth and urban transit, innovation and new ideas in the transit industry, urban transportation and climate change, the future of transit and the environment, as well as active transportation and its impact on human health. It is felt that public transit should represent the primary solution to urban mobility, with the aim of achieving sustainable transportation. Urban transit and the various means by which it can have an impact on the reduction of greenhouse gases emissions and global climate change were discussed in great depth. Community growth has spurred the demand for additional transportation, and presents challenges particular to each community. Discussions also focused on the resulting air quality and pollution problems along with some proposed solutions. Clean fuels, such as compressed natural gas, propane and methanol were also touched upon, as were emerging technologies in the fields of vehicle and new propulsion technologies. The impact of public transit on public health, from the point of view of air quality, climate change and safety was discussed. A total of 35 papers were presented at this conference, of which 9 were processed separately for inclusion in the database. tabs., figs

  16. 13th CERI [Canadian Energy Research Inst.] international oil and gas markets conference

    International Nuclear Information System (INIS)

    1994-01-01

    At an oil and gas industry conference, papers were presented on world oil supply and demand, energy geopolitics, world oil prices, the status of the Chinese oil/gas industry and prospects for exploration and development, Latin American oil/gas markets and development opportunities, the oil and gas industries in non-OPEC Middle East countries (Oman, Yemen, Turkey), oil and gas markets in North America, and financial and regulatory aspects of domestic gas markets in Canada and the USA. Separate abstracts have been prepared for 17 papers from this conference

  17. Canadian conference on electrical and computer engineering proceedings. Congres canadien en genie electrique et informatique

    Energy Technology Data Exchange (ETDEWEB)

    Bhargava, V K [ed.

    1993-01-01

    A conference was held on the subject of electrical and computer engineering. Papers were presented on the subjects of artificial intelligence, video, signal processing, radar, power electronics, neural networks, control, computer systems, transportation electronics, software tools, error control coding, electrothermal phenomena, performance evaluation of computer systems, wireless communication, satellite communication, very large scale integration, parallel processing, pattern recognition, telephony, graphs and algorithms, multimedia, broadcast systems, remote sensing, computer networks, modulation and coding, robotics, computer architecture, spread spectrum, image processing, microwave circuits, biomedical engineering, specification and verification, image restoration, communications networks, computer-aided design, drives, energy systems, expert systems, and optics. Separate abstracts have been prepared for 56 papers from the conference.

  18. Subsurface Geotechnical Parameters Report

    International Nuclear Information System (INIS)

    Rigby, D.; Mrugala, M.; Shideler, G.; Davidsavor, T.; Leem, J.; Buesch, D.; Sun, Y.; Potyondy, D.; Christianson, M.

    2003-01-01

    The Yucca Mountain Project is entering a the license application (LA) stage in its mission to develop the nation's first underground nuclear waste repository. After a number of years of gathering data related to site characterization, including activities ranging from laboratory and site investigations, to numerical modeling of processes associated with conditions to be encountered in the future repository, the Project is realigning its activities towards the License Application preparation. At the current stage, the major efforts are directed at translating the results of scientific investigations into sets of data needed to support the design, and to fulfill the licensing requirements and the repository design activities. This document addresses the program need to address specific technical questions so that an assessment can be made about the suitability and adequacy of data to license and construct a repository at the Yucca Mountain Site. In July 2002, the U.S. Nuclear Regulatory Commission (NRC) published an Integrated Issue Resolution Status Report (NRC 2002). Included in this report were the Repository Design and Thermal-Mechanical Effects (RDTME) Key Technical Issues (KTI). Geotechnical agreements were formulated to resolve a number of KTI subissues, in particular, RDTME KTIs 3.04, 3.05, 3.07, and 3.19 relate to the physical, thermal and mechanical properties of the host rock (NRC 2002, pp. 2.1.1-28, 2.1.7-10 to 2.1.7-21, A-17, A-18, and A-20). The purpose of the Subsurface Geotechnical Parameters Report is to present an accounting of current geotechnical information that will help resolve KTI subissues and some other project needs. The report analyzes and summarizes available qualified geotechnical data. It evaluates the sufficiency and quality of existing data to support engineering design and performance assessment. In addition, the corroborative data obtained from tests performed by a number of research organizations is presented to reinforce

  19. Subsurface Geotechnical Parameters Report

    Energy Technology Data Exchange (ETDEWEB)

    D. Rigby; M. Mrugala; G. Shideler; T. Davidsavor; J. Leem; D. Buesch; Y. Sun; D. Potyondy; M. Christianson

    2003-12-17

    The Yucca Mountain Project is entering a the license application (LA) stage in its mission to develop the nation's first underground nuclear waste repository. After a number of years of gathering data related to site characterization, including activities ranging from laboratory and site investigations, to numerical modeling of processes associated with conditions to be encountered in the future repository, the Project is realigning its activities towards the License Application preparation. At the current stage, the major efforts are directed at translating the results of scientific investigations into sets of data needed to support the design, and to fulfill the licensing requirements and the repository design activities. This document addresses the program need to address specific technical questions so that an assessment can be made about the suitability and adequacy of data to license and construct a repository at the Yucca Mountain Site. In July 2002, the U.S. Nuclear Regulatory Commission (NRC) published an Integrated Issue Resolution Status Report (NRC 2002). Included in this report were the Repository Design and Thermal-Mechanical Effects (RDTME) Key Technical Issues (KTI). Geotechnical agreements were formulated to resolve a number of KTI subissues, in particular, RDTME KTIs 3.04, 3.05, 3.07, and 3.19 relate to the physical, thermal and mechanical properties of the host rock (NRC 2002, pp. 2.1.1-28, 2.1.7-10 to 2.1.7-21, A-17, A-18, and A-20). The purpose of the Subsurface Geotechnical Parameters Report is to present an accounting of current geotechnical information that will help resolve KTI subissues and some other project needs. The report analyzes and summarizes available qualified geotechnical data. It evaluates the sufficiency and quality of existing data to support engineering design and performance assessment. In addition, the corroborative data obtained from tests performed by a number of research organizations is presented to reinforce

  20. Proceedings of the 1. annual Canadian farm and food biogas conference and exhibition

    International Nuclear Information System (INIS)

    2009-01-01

    This conference provided a forum for researchers, farmers, and electric utility operators to discuss issues related to the growth of Canada's biogas industry. Many farmers are now exploring methods of producing biogas from agricultural wastes using anaerobic digestion technologies. However, regulatory problems continue to stall the growth of the fledgling biogas industry. In addition, many biogas plants face challenges related to ensuring reliable grid connections. European and American perspectives on biogas development were presented at the conference along with issues related to provincial and federal regulations and policies. Technologies and strategies for connecting biogas systems with other power systems were presented. The conference was divided into 11 sessions and 2 plenary sessions: (1) B1 grid connection solutions; (2) B2D energy crops and other plant-based co-substrates; (3) B2E Ontario biogas today; (4) B3D mixed materials; (5) B3E siting, odour and safety; (6) B4D economics and policy issues; (7) B4E genset performance and efficiency panel; (8) B5D case studies of food or farm biogas systems; (9) B5E case studies of farm-based systems; (10) B6D biogas next steps; and (11) B6E biogas in an urban setting. The conference featured 42 presentations, of which 5 have been catalogued separately for inclusion in this database. A set of 12 poster presentations were also presented, as well as several networking forums. tabs., figs

  1. Abstracts of the 54. Canadian Chemical Engineering Conference : Energy for the Future

    International Nuclear Information System (INIS)

    2004-01-01

    The key energy challenges facing the chemical process industries were addressed at this international conference. Chemical engineering was shown to play a critical role in offering technical solutions to the challenges of climate change and pollution abatement on a global scale. The sessions addressed a variety of issues dealing with heavy oil processing and utilization, natural gas processing, reservoir engineering and biotechnology process systems. The presentations also addressed issues dealing with applied thermodynamics, new technologies, polymer engineering and other fundamental processes, including some used by the pulp and paper industry. The conference featured more than 500 presentations from around the world, including Canada, the United States, Asia and Europe. A total of 84 papers have been indexed separately for inclusion in this database

  2. Proceedings of the Canadian Heavy Oil Association's annual business conference : out of the chute

    International Nuclear Information System (INIS)

    2004-01-01

    This conference provided a forum for advanced technology experts in the upstream petroleum industry and heavy oil industry to exchange information about emerging technologies for resource recovery, refining, markets, trade and logistics. It was divided into 4 sessions entitled: (1) natural gas and upgrading alternatives, (2) project management issues, (3) project updates, and (4) business and markets. The presentations outlined the use of fuel substitutions and the implications for upgrading, controlling the capital costs of oil sand projects and construction issues facing heavy oil. Trends and factors affecting the petroleum industry in Canada were discussed with particular reference to the Asian interest in Alberta's oil sands and the need for a transportation corridor to bring products to southern markets. The conference featured 12 presentations, of which 6 were indexed separately for inclusion in this database. refs., tabs., figs

  3. Proceedings of the Canadian Dam Association's 2006 annual conference: dams: past, present and future

    International Nuclear Information System (INIS)

    2006-01-01

    This conference addressed particular technical challenges regarding the operation of dams with particular focus on best practices for improving dam management and safety. It featured 4 workshops and a technical program led by experts on dams and tailings facilities that addressed topics such as dam construction, design and rehabilitation; dam management in a hydrological uncertainty context; monitoring, instrumentation and maintenance; dam behaviour; dam safety, dam failure and practical approaches to emergency preparedness planning for dam owners; historical aspects and environmental issues and conflicting water use. Recent developments in dam construction were reviewed along with discharge and debris management, tailings dam issues, asset management, seismic issues, public safety, seepage monitoring, flow control, dam rehabilitation, concrete testing, hydrotechnical issues, risk assessment methodology, and dam safety guidelines for extreme flood analyses and their applications. All 80 presentations from this conference have been catalogued separately for inclusion in this database. refs., tabs., figs

  4. Conference proceedings of the Canadian Aboriginal Minerals Association : certainty through partnership

    International Nuclear Information System (INIS)

    2004-01-01

    This conference presents a series of papers concerning resource development in the Aboriginal community in which partnership is a key issue. The challenges facing resource industries regarding investments and securing land tenure were discussed. These uncertainties can be alleviated through partnerships between industry and Aboriginal communities, where each partner brings their experience, access to knowledge, and access to capital. Perspectives of the diamond, mining and biomass industries were given. In addition, issues concerning accessing funds for business development, practices for local employment and sustainability were examined. An update on pipelines is presented, as well as an overview and examination of the suppliers to the resource industry. This conference featured 9 presentations of which 2 have been catalogued separately for inclusion in this database. tabs., figs

  5. Proceedings of the Canadian Wind Energy Association's 2009 wind matters conference : wind and power systems

    International Nuclear Information System (INIS)

    2009-01-01

    This conference provided a forum for wind energy and electric power industry experts to discuss issues related to wind and power systems. An overview of wind integration studies and activities in Canada and the United States was provided. New tools and technologies for facilitating the integration of wind and improve market conditions for wind energy developers were presented. Methods of increasing wind penetration were evaluated, and technical issues related to wind interconnections throughout North America were reviewed. The conference was divided into the following 5 sessions: (1) experiences with wind integration, and lessons learned, (2) update on ongoing wind integration initiatives in Canada and the United States, (3) initiatives and tools to facilitate wind integration and market access, (4) developments in wind interconnection and grid codes, (5) wind energy and cold weather considerations, and (6) challenges to achieving the 20 per cent WindVision goal in Canada. The conference featured 21 presentations, of which 13 have been catalogued separately for inclusion in this database. refs., tabs., figs

  6. Proceedings of the Canadian Institute's BC power conference : maximizing opportunities in the evolving electricity sector

    International Nuclear Information System (INIS)

    2004-01-01

    This conference provided a forum for reviewing recent events and activities in British Columbia's electric power industry. Issues regarding energy supply, reliability, power generation, power distribution and power transmission were discussed along with the opportunities and challenges of developing renewable energy sources. Participants at the conference gained insight into strategies for determining the usefulness of an energy plan; assessing the prospects for new generation capacity; examining future whole sale markets; analyzing congestion problems; identifying import and export opportunities; planning for rate design and exploring the future supply on Vancouver Island. The possibilities for meeting the growing demand for electricity through an integrated electrical transmission system throughout the west coast, British Columbia, the Pacific Northwest and Alberta were examined along with financing structures and strategies of renewable energy projects. The role of regulators and their influence on electricity prices were also discussed. Resource planning guidelines were examined as well as other topics such as demand side management, energy conservation, the role of liquefied natural gas in power generation, and land use challenges for power generation. The conference featured 21 presentations, of which 7 have been catalogued separately for inclusion in this database. tabs, figs

  7. Geotechnical site assessment methodology

    International Nuclear Information System (INIS)

    Tunbridge, L.W.; Richards, L.R.

    1985-09-01

    The reports comprising this volume concern the research conducted on geotechnical site assessment methodology at the Carwynnen test mine in granites in Cornwall, with particular reference to the effect of structures imposed by discontinuities on the engineering behaviour of rock masses. The topics covered are: in-situ stress measurements using (a) the hydraulic fracturing method, or (b) the US Bureau of Mines deformation probe; scanline discontinuity survey - coding form and instructions, and data; applicability of geostatistical estimation methods to scalar rock properties; comments on in-situ stress at the Carwynnen test mine and the state of stress in the British Isles. (U.K.)

  8. Proceedings of the 16. annual conference of the Canadian Institute of Energy : Energy 2001 - Energy Markets in the New Millennium : Trends and Evolutions

    International Nuclear Information System (INIS)

    2001-01-01

    This conference held by the Canadian Institute of Energy provided a Canadian perspective on energy technology, business and policy, both nationally and internationally. In particular, it was designed to provide a thorough examination of energy issues and trends within British Columbia. A variety of issues were discussed, including the environment, climate change, greenhouse gases, and alternative technologies. Some of the presentations dealt with the challenge of switching to renewable energy technologies for sustainable development. Others focused on trends in energy policy and business, energy market pricing, risk management, energy supply and demand, and regulatory trends. A total of 8 presentations were presented at this conference, of which 3 were catalogued separately for inclusion in the database. tabs., figs

  9. Proceedings of the Canadian Heavy Oil Association Conference : Heavy oil, the business of evolution

    International Nuclear Information System (INIS)

    2003-01-01

    gas industry to exchange knowledge about fueling options, emerging technologies for resource recovery, and markets and logistics. Most of the papers were presented in Power-Point format with several viewgraphs depicting processes used mostly to recover bitumen from the tar sand and oil sand deposits in Western Canada. The enhanced recovery methods ranged from chemical recovery and thermal recovery methods such as steam assisted gravity drainage (SAGD) and toe-to-heel air injection (THAI). Separation processes and sorbent recovery methods were also discussed. The conference featured 11 presentations, of which 5 were indexed separately for inclusion in this database. refs., tabs., figs

  10. Papers of a Canadian Institute conference on basin deliverability in the WCSB

    International Nuclear Information System (INIS)

    2003-01-01

    Much of North America depends on the reserves of the Western Canada Sedimentary Basin (WCSB). As the basin reaches maturity, higher drilling levels and higher capital expenditures will be required to meet energy demands. This conference addresses the issue of future production from the WCSB and discusses how increasing decline rates will impact every sector of the natural gas industry. Topics of discussion include transportation assets, price volatility, and the gap between supply and demand. Key questions arising from depleting conventional gas reserves were addressed along with how gas prices will react to supply constraint. The issue of whether unconventional gas can make up for the shortfall in supply was discussed along with strategic decisions regarding the possibility of raising tolls to offset the effects of supply shortage. The impact that Alberta's regulatory environment may have on the economics of production in the WCSB were also discussed. The conference featured 11 presentations, of which 3 have been indexed separately for inclusion in this database. refs., tabs., figs

  11. Proceedings of the APPrO 2006 18. annual Canadian power conference and trade show : Green Power Conference : Canada's leading renewable energy conference

    International Nuclear Information System (INIS)

    Brooks, J.

    2007-01-01

    This conference provided a forum for members of the Association of Power Producers of Ontario to discuss recent developments in renewable energy and the electric power industry. An overview of Ontario's renewable standard offer program was provided. Members of the conference also discussed case studies of Ontario renewable energy projects including micro-hydro; anaerobic digesters; stand-alone wind power; and solar energy. The economics of wind power were discussed, and current capital costs for renewable energy technology projects were reviewed. Other topics included the use of base-load nuclear and hydro-electricity; the closing down of coal-fired generation; the integration of wind power; and natural gas and cogeneration. Issues related to interconnected power supplies were also reviewed. Discussions were divided into 5 topics : (1) an introduction to the standard offer program; (2) provincial procurement of green power; (3) case studies of stand-alone project; (4) distributed generation and the standard offer process; and distribution approval and connection issues. refs., tabs., figs

  12. Papers of the 2. annual Canadian Institute conference on interjurisdictional power transactions

    International Nuclear Information System (INIS)

    2002-01-01

    Leaders in the electric power industry from Canada and the United States attended this conference which focused on ways that Ontario's new competitive energy market can maximize its profits through interjurisdictional power transactions with the US northeast and midwest. Topics of discussion included how to target power sales to hotspots in the United States, how to avoid seams issues when wheeling power through jurisdictions, and how to monitor intertie capacity. Other issues were also addressed, including how to manage profits from the financial transmission rights structure, and tracking the latest developments in RTO creation in the United States and its potential impact on interjurisdictional power transactions. A total of 12 papers were presented, of which 4 were indexed separately for inclusion in the database. tabs., figs

  13. Papers of the 3. annual Canadian Institute conference on interjurisdictional power transactions

    International Nuclear Information System (INIS)

    2003-01-01

    Leaders from the electric power industry in both Canada and the United States presented their views on a wide range of topics dealing with interjurisdictional power transactions. Participants presented ideas on how to prepare for the Federal Energy Regulatory Commission's (FERC) proposed new Standard Market Design. They also addressed the issue of how to overcome congestion for seamless power transactions between Canada and the Northeast. The way in which some companies and regions are preparing themselves for locational marginal pricing were also presented. Other topics included the state of the market power mitigation in Ontario, and increased trade potential within Ontario, Quebec and Atlantic Canada. Updates on the Lake Erie Link project were included along with a discussion on the expected impact it may have on trade capacity between Canada and the United States. The conference featured 18 presentations, of which 7 have been indexed separately for inclusion in this database. refs., tabs., figs

  14. Geotechnical site assessment methodology

    International Nuclear Information System (INIS)

    Tunbridge, L.W.; Richards, L.R.

    1985-09-01

    A final report summarizing the research conducted on geotechnical site assessment methodology at the Carwynnen test mine in Cornwall. The geological setting of the test site in the Cornubian granite batholith is described. The effect of structure imposed by discontinuities on the engineering behaviour of rock masses is discussed and the scanline survey method of obtaining data on discontinuities in the rock mass is described. The applicability of some methods of statistical analysis for discontinuity data is reviewed. The requirement for remote geophysical methods of characterizing the mass is discussed and experiments using seismic and ultrasonic velocity measurements are reported. Methods of determining the in-situ stresses are described and the final results of a programme of in-situ stress measurements using the overcoring and hydrofracture methods are reported. (author)

  15. Reclamation with a purpose. Proceedings of a joint conference of ASMR 19th annual national conference and IALR 6th international conference

    Energy Technology Data Exchange (ETDEWEB)

    Barnhisel, R.; Collins, M. (eds.) [American Society of Mining and Reclamation, Lexington, KY (United States)

    2002-07-01

    The conference covers the following topics: ecology; forestry and wildlife; geotechnical engineering; inter, tailing and reclamation; land use planning and design; soils and overburden and water management.

  16. Conference summaries

    International Nuclear Information System (INIS)

    1991-01-01

    This volume contains conference summaries for the 31. annual conference of the Canadian Nuclear Association and the 12. annual conference of the Canadian Nuclear Society. Topics of discussion include: reactor physics; thermalhydraulics; industrial irradiation; computer applications; fuel channel analysis; small reactors; severe accidents; fuel behaviour under accident conditions; reactor components, safety related computer software; nuclear fuel management; fuel behaviour and performance; reactor safety; reactor engineering; nuclear waste management; and, uranium mining and processing

  17. 55th Annual Canadian Society for Molecular Biosciences Conference on Epigenetics and Genomic Stability. Whistler, British Columbia, Canada, 14–18 March 2012.

    Science.gov (United States)

    Nelson, Christopher J; Ausió, Juan

    2012-06-01

    The 55th Annual Canadian Society for Molecular Biosciences Conference on Epigenetics and Genomic Stability in Whistler, Canada, 14-18 March 2012, brought together 31 speakers from different nationalities. The organizing committee, led by Jim Davie (Chair) at the University of Manitoba (Manitoba, Canada), consisted of several established researchers in the fields of chromatin and epigenetics from across Canada. The meeting was centered on the contribution of epigenetics to gene expression, DNA damage and repair, and the role of environmental factors. A few interesting talks on replication added some insightful information on the controversial issue of histone post-translational modifications as genuine epigenetic marks that are inherited through cell division.

  18. Development of a geotechnical information database.

    Science.gov (United States)

    2009-06-01

    The purpose of this project was to create a database for existing, current, and future geotechnical records and data. : The project originated from the Geotechnical Design Section at the Louisiana Department of Transportation and : Development (LADOT...

  19. Polar science, technology and information: Tenth anniversary conference of ACUNS (Association of Canadian Universities for Northern Studies), Ryerson Polytechnical Institute. La science, la technologie et l'information polaires: Dixieme conference anniversaire de l'AUCEN (Association Universitaire Canadienne d'Etudes Nordiques), Institut Polytechnique Ryerson

    Energy Technology Data Exchange (ETDEWEB)

    Adams, P.; Duerden, F. (eds.)

    1988-01-01

    A conference was held on the subject of polar science, technology and information, by the Association of Canadian Universities for Northern Studies (ACUNS). Papers were presented on varied subjects under the categories of technology and the north, polar science, information and the north, and ACUNS related activiities. Separate abstracts have been prepared for five papers from this conference.

  20. Proceedings of the 2008 CIGRE Canada conference on power systems : technology and innovation for the Canadian power grids of the future

    International Nuclear Information System (INIS)

    2008-01-01

    The Conseil International des Grands Reseaux Electriques (CIGRE) promotes technical, economic and environmental developments in electricity transmission and generation. CIGRE Canada is one of 53 national committees of CIGRE. This conference showcased Canadian contributions to the electric power industry and how technology and innovation in the future will influence North American power grids. It provided a forum to discuss technological developments in the electric power industry and present products and services for electrical power systems. Issues concerning the interconnection of non traditional energy sources to the power systems were also discussed along with recent research initiatives related to renewable energy source development. The sessions of the conference were entitled: wind reliability and forecasting; substation automation and communication; human resources and long range planning; power system protection and control; distributed generation; electric vehicles and renewable energy; HVDC and facts; modeling and simulation; markets; overhead transmission lines; and new sensor and de-icing technologies and data management systems. All 68 presentations featured at this conference have been catalogued separately for inclusion in this database. refs., tabs., figs

  1. Recycled materials in geotechnical applications. Geotechnical special publication No. 79

    Energy Technology Data Exchange (ETDEWEB)

    Vipulanandan, C.; Elton, D.J. [eds.

    1998-07-01

    Recycled materials have the potential for use in a variety of geotechnical and geoenvironmental applications. This proceedings contains 15 papers on field applications and laboratory testing related to recycled materials. Papers cover: geotechnics of industrial by-products; paper mill sludge for landfill cover; mitigation of void development under bridge approach slabs using rubber tire chips; tire shreds as lightweight fill for embankments and retaining walls; performance of a highway embankment and hydraulic barriers constructed using waste foundry sand, and recycled materials; lagoon-stored lime for embankment; construction and demolition debris for base and subbase applications; fly ash for fill, pavement, earth structures and aggregate; compaction of contaminated soils-reuse as a road base material; and database on beneficial reuse of foundry by-products; and more.

  2. Proceedings of the Canadian Society for Bioengineering CSBE/SCGAB 2009 annual general meeting and technical conference

    International Nuclear Information System (INIS)

    2009-01-01

    This conference was attended by experts on current issues in engineering of an urban ecosystem, composting, biofuels and green energy. The meeting provided a forum to discuss advances in the application of engineering principles and practices dealing with biological systems for the production of food, bioproducts and energy. The discussions focused on engineering practices in agriculture, forestry, bioresources, biochemistry and biosystems. The 7 technical sessions of the conference were entitled: aquaculture; safety and training; bioprocessing; energy production and biofuels; environment and ecology; soil and water; and development of technologies. The conference feature 58 presentations, of which 9 have been catalogued separately for inclusion in this database. refs., tabs., figs

  3. Proceedings of the 2002 Petroleum Society of CIM/SPE/CHOA International Thermal Operations and Heavy Oil Symposium, International Conference on Horizontal Well Technology, and Canadian Heavy Oil Association Business Conference : Resources 2 Reserves 2 Results. CD ROM ed.

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    This three day conference combined the Petroleum Society's International Horizontal Well and Technology Conference, the Society of Petroleum Engineer's (SPE) International Thermal Operations and Heavy Oil Symposium, and the Canadian Heavy Oil Association's (CHOA) Annual Business Meeting. The 87 presentations covered all aspects of heavy oil, thermal, and horizontal well technology from geosciences and drilling to economics and environment. The themes included financing, turning projects into results, eliminating the downstream barriers to oil sand development in North America and the world, and emerging technologies for horizontal or heavy oil applications. The conference included the following 20 sessions: (1) thermal operations/engineering, (2) well testing/productivity of horizontal wells, (3) heavy oil operations, (4) environmental aspects of heavy oil projects, (5) upgrading/pipelines, (6) economics and project appraisal, (7) simulation studies of thermal projects, (8) multilaterals, (9) horizontal wells in conventional reservoirs, (10) cold production of heavy oil, (11) horizontal drilling in thermal projects, (12) simulation studies of horizontal wells, (13) horizontal drilling technology, (14) thermal field studies and horizontal wells in heavy oil, (15) completion/production technology of horizontal and thermal wells, (16) physics and PVT of heavy oil recovery processes, (17) reservoir characterization/geosciences, (18) horizontal injectors/produced water technology, (19) emerging technologies, and (20) reservoir geomechanics/fracturing. Tutorials were also organized to provide opportunity to review areas that have undergone major changes. A total of 73 papers were indexed separately for inclusion in the database. refs., tabs., figs.

  4. Conference summaries

    International Nuclear Information System (INIS)

    1986-01-01

    This volume contains conference summaries of the international conference on radioactive waste management of the Canadian Nuclear Society. Topics of discussion include: storage and disposal; hydrogeology and geochemistry; transportation; buffers and backfill; public attitudes; tailings; site investigations and geomechanics; concrete; economics; licensing; matrix materials and container design; durability of fuel; biosphere modelling; radioactive waste processing; and, future options

  5. Seismic behaviour of geotechnical structures

    Directory of Open Access Journals (Sweden)

    F. Vinale

    2002-06-01

    Full Text Available This paper deals with some fundamental considerations regarding the behaviour of geotechnical structures under seismic loading. First a complete definition of the earthquake disaster risk is provided, followed by the importance of performing site-specific hazard analysis. Then some suggestions are provided in regard to adequate assessment of soil parameters, a crucial point to properly analyze the seismic behaviour of geotechnical structures. The core of the paper is centered on a critical review of the analysis methods available for studying geotechnical structures under seismic loadings. All of the available methods can be classified into three main classes, including the pseudo-static, pseudo-dynamic and dynamic approaches, each of which is reviewed for applicability. A more advanced analysis procedure, suitable for a so-called performance-based design approach, is also described in the paper. Finally, the seismic behaviour of the El Infiernillo Dam was investigated. It was shown that coupled elastoplastic dynamic analyses disclose some of the important features of dam behaviour under seismic loading, confirmed by comparing analytical computation and experimental measurements on the dam body during and after a past earthquake.

  6. Conference summaries

    International Nuclear Information System (INIS)

    1988-01-01

    This volume contains conference summaries of the 28. annual conference of the Canadian Nuclear Association, and the 9. annual conference of the Canadian Nuclear Society. Topics of discussion include: power reactors; fuel cycles; nuclear power and public understanding; future trends; applications of nuclear technology; CANDU reactors; operational enhancements; design of small reactors; accident behaviour in fuel channels; fuel storage and waste management; reactor commissioning/decommissioning; nuclear safety experiments and modelling; the next generation reactors; advances in nuclear engineering education in Canada; safety of small reactors; current position and improvements of fuel channels; current issues in nuclear safety; and radiation applications - medical and industrial

  7. Summaries of the thirteenth annual Canadian independent power conference and trade show : From theory to action: bringing fresh investment to the sector

    International Nuclear Information System (INIS)

    Eggertson, W.; McArthur, D.; Kishewitsch, S.

    2002-05-01

    This conference hosted by the Independent Power Producers' Society of Ontario, acquired an added impetus with the preparations under way for the opening of the Ontario electricity market to competition, scheduled for 2002. The speakers, over 30 of them, discussed the various aspects related to investment in the Ontario sector. The topics discussed were as follows: (1) what is needed to really get Ontario's market moving, (2) the regulator's role in facilitating competition and investment, (3) the regulator's role and the status of major capacity, (4) tax reforms proposed by the Canadian Electricity Association (CEA) and the Independent Power Producers' Society of Ontario to encourage investment, (5) achieving healthy competition, (6) addressing market behaviour: compliance and enforcement, (7) workshop on the new emission trading system, (8) improving environmental performance, (9) power purchasers' panel, (10) transmission within Ontario and at its borders, and (11) the shape of the future: maximizing on promise and opportunity. This conference provided an ideal forum for all independent producers to discuss issues and share ideas. refs., tabs., figs

  8. Papers of a Canadian Institute conference on profiting from new opportunities in Atlantic power : new rules, new players, new challenges

    International Nuclear Information System (INIS)

    2003-01-01

    New opportunities for power generation in Atlantic Canada were presented at this conference with particular reference to the influence that electricity restructuring has had on power markets, energy supplies and trade. Topics of discussion included: the future of electricity deregulation; increasing power transmission and intertie capacity; an energy mix which includes natural gas, hydro, wind and cogeneration; energy policy and regulations of the new power market; and, buyer and seller experience in the new market. The conference featured 12 presentations, of which 6 have been indexed separately for inclusion in this database. refs., tabs., figs

  9. Geotechnical thematic maps of Petrobras pipeway

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, W.J. [Petrobras, Rio de Janeiro (Brazil); Moreira, L.F.R. [TransPetro, Rio de Janeiro (Brazil); Valente, J.C.P.; Vieira, A.C.; Dourado, A.F.; Viitaniemi, T. [Terrabyte Ltd., Sao Goncalo (Brazil)

    2004-07-01

    The challenges of installing underground terrestrial pipelines in regions with different morphologic characteristics include geotechnical problems such as superficial erosion or landslides. Due to this risk, TransPetro pipeline routes require continuous geologic-geotechnical inspections. This paper presented a methodology to detect possible risk of a geotechnical nature. The methodology uses remote sensing technology combined with geographic information system (GIS) geoprocessing. Aerial photography interpretation provides the visualization of risk features along pipelines and adjacent areas. The features of risk identified during photointerpretation are digitized and georeferenced, thereby facilitating geoprocessing. All data statistics are then analyzed in such a way to identify areas of high risk for geotechnical occurrence. The analyses allowed for the creation of a risk index, which was calculated to portions of 5 km of the pipeline. Risk was ranked in terms of high, medium and low susceptibility to geotechnical accidents. The geotechnical thematic mapping (GTM) was then created to predict geotechnical risk areas. The GTM was also incorporated into the 2002 standard for management of pipeline structural integrity due to its capability of classifying pipeline routes according to susceptibility to geological-geotechnical accidents. Inspection frequency can be established based on this classification. In addition to measuring the effectiveness of applied engineering techniques, the monitoring will also improve the understanding of the evolution of rights-of-way. 18 refs., 3 tabs.

  10. Proceedings of the Canadian Institute's 8. annual midstream 2005 conference : capitalize on change and opportunity in Canada's evolving midstream sector

    International Nuclear Information System (INIS)

    2005-01-01

    This conference provided a venue for Canada's midstream oil and gas sector to discuss strategies and options for capitalizing on changes within the industry. Members presented papers related to upcoming federal government climate change regulations and discussed methods of capitalizing on new processing fee guidelines. Strategies for managing market volatility were examined, and issues related to liquefied natural gas (LNG) were reviewed along with methods of optimizing gas processing capacity and negotiating processing fees. A natural gas liquids (NGL) pricing outlook was provided and risk management strategies for royalty and income trusts were discussed. Issues related to the safe and cost-effective abandonment of wells were also examined. The conference featured 17 presentations, of which 3 have been catalogued separately for inclusion in this database. tabs., figs

  11. Papers of the Canadian Institute's 3. annual conference : oil sands supply and infrastructure : labour supply, upgraders, transportation, pipelines

    International Nuclear Information System (INIS)

    2005-01-01

    The focus of this conference was on the development of the oil sands industry, with specific reference to issues concerning supply and infrastructure. Energy source development and transmission issues were discussed, as well as transportation systems. The impact of increased oil sands development on pipelines was also examined. Various fuel options were discussed, including the use of hydrogen, natural gas and alternate fuels in manufacturing and processing plants. Economic drivers and the creation of new markets were examined, and various export opportunities were reviewed. The environmental impact of increased oil sands activity was discussed, with specific reference to the Boreal regions. Management challenges in the oil sands industry were also discussed along with issues concerning human resources, labour supply, training and education. The conference featured 15 presentations, of which 13 have been catalogued separately for inclusion in this database. refs., tabs., figs

  12. Proceedings of the Canadian Institute conference on maximizing oil sands growth : improving transportation logistics, labour supply and pipeline availability

    International Nuclear Information System (INIS)

    2005-01-01

    This conference focused on the development of a transportation infrastructure to accommodate oil sands growth, with particular reference to building a pipeline infrastructure to meet the delivery and supply requirements of oil sands producers. The need for transmission system upgrades and additions to meet the electric power requirements of the oil sands industry was also discussed. The transportation options and new proposed pipeline construction projects that will alleviate the current transportation challenges in the oil sands region were identified. These include the implementation of new infrastructure strategies based on current pipeline availability, Kyoto requirements and downstream market demands. The impact of labour shortages on the oil sands industry was reviewed along with solutions to prevent and overcome these shortages. The conference featured 15 presentations, of which 3 have been catalogued separately for inclusion in this database. tabs., figs

  13. (Networking + Integrating) * (Systems + Society). Proceedings of the Annual Canadian Conference of Information Science (12th, Toronto, Ontario, May 14-16, 1984) = (Reseaux + Integration) * (Systemes + Societe). Comptes rendus de la conference annuelle Canadienne des sciences de l'information (12th, Toronto, Ontario, 14-16 mai, 1984).

    Science.gov (United States)

    Canadian Association for Information Science, Ottawa (Ontario).

    Seventeen papers from the 1984 annual conference of the Canadian Association for Information Science (CAIS) are presented in four broad topic areas. The first group, which focuses on changing roles in information access, includes the keynote address by Charles Meadow, "Integrating Access to Information Utilities: Promises, Problems, and…

  14. 2. Symposium environmental geotechnics. Papers

    International Nuclear Information System (INIS)

    Klapperich, H.; Katzenbach, R.; Witt, K.J.; Griessl, D.

    2005-01-01

    The 2nd symposium of the chapter section 'Environmental Geotechnics' of DGGT follows the event in Weimar 2003 and focuses on the central topics of Landfill - Contaminated Sites - Brownfields. The stream 'Waste management - Waste Site technology' discusses legal requirements and technical alternatives, especially in view of many upcoming closures of landfill sites and associated surface sealing, as well as technical reports of case studies and developments. The contribution 'Ultimate storage of radioactive waste' illustrates the wider dimensions to geotechnical questions. Between the streams of 'Remediation Techniques' and 'Land Recycling/Land Management' a panel discussion 'From Brownfield Remediation to Land Management' is taking place. The aim is to discuss the way forward and the need to take up the opportunity for future town planning as well as the design of conversion sites and expansive former mining areas. Representatives of authorities involved and project participants have submitted their statements in advance to the following question: 1.) status of remediation - research and practice 2.) what practical significance is attributed to different remediation techniques for the remediation of brownfields? 3.) modern town planning/redevelopment of former mining areas - spatial planning - real estate economy - financing models for redeveloping land - which parameters/instruments work? (orig.)

  15. Proceedings of the Canadian District Energy Association's 9. annual conference and exhibition in association with the Canadian Energy Efficiency Alliance : Create, conserve, connect : District energy and energy efficiency for Canadian communities

    International Nuclear Information System (INIS)

    2004-01-01

    This conference provided an opportunity to demonstrate the latest developments in the supply and delivery of clean and efficient power, heating and cooling, with particular attention to proven energy solutions based on district energy and cogeneration technologies. Opportunities for distributed generation in Canada were presented, along with their associated risks and the impacts they have on business efficiency, communities and the environment. Topics of discussion focused on financing local energy projects, emission reduction implications, developing partnerships, best practices for energy systems, strategies for delivering energy efficiency, and policies that support energy solutions. The latest technological advances in research and development were also reviewed. District energy provides heating and cooling from a central plant to multiple users using piped steam through a series of supply and return pipes. Industrial cogeneration takes advantage of excess thermal capacity and reuses it to generate high-value electric power. Both district energy and cogeneration can save money for users, conserve resources, reduce pollution and offer sustainable energy solutions for the future. The conference featured 32 presentations, all of which were indexed separately for inclusion in this database. tabs., figs

  16. Papers of a Canadian Institute conference on successfully managing counter party credit risk : fundamentals and essentials for the energy industry

    International Nuclear Information System (INIS)

    2003-01-01

    The main focus of this conference is the management of credit risk for major energy trading and marketing companies. The papers deal with pertinent issues such as the development and implementation of corporate credit risk management policy, credit risk exposure reporting systems, and the quality of ratings in the utility sector. Risk management strategies include quantitative and subjective credit factors, credit scoring, risk mitigation, limit-setting methodologies, measurement of liquidity, capital markets access, portfolio management, and the development of policies, procedures and control. Three presentations were indexed separately for inclusion in the database. refs., tabs., figs

  17. Capitalizing on new opportunities in Canada's emerging midstream : processing, transportation, marketing, NGL, storage : proceedings of a Canadian Institute conference

    International Nuclear Information System (INIS)

    1999-01-01

    Text or speaking notes used at a conference to examine the challenges and opportunities facing Canada's midstream petroleum and natural gas industry are contained in this volume. A total of eight 8 papers were presented, focusing on the wide range of business opportunities that do not fit into the core functions of the upstream business (exploration and production), or into the core functions of the downstream business (distribution and retail marketing). One of the biggest opportunities lies in the development of storage facilities for the natural gas industry. Other aspects of the midstream business addressed included processing, transportation, marketing, and natural gas liquids. tabs., figs

  18. Papers of a Canadian Institute conference on successfully managing counter party credit risk : fundamentals and essentials for the energy industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    The main focus of this conference is the management of credit risk for major energy trading and marketing companies. The papers deal with pertinent issues such as the development and implementation of corporate credit risk management policy, credit risk exposure reporting systems, and the quality of ratings in the utility sector. Risk management strategies include quantitative and subjective credit factors, credit scoring, risk mitigation, limit-setting methodologies, measurement of liquidity, capital markets access, portfolio management, and the development of policies, procedures and control. Three presentations were indexed separately for inclusion in the database. refs., tabs., figs.

  19. Proceedings of the 6. Canadian Urban Forest Conference : fires, storms, and pests : crisis in our urban forests

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    There is an increasing awareness in Canada of the benefits and values of urban forests in environmental, social and economic terms. However, the mountain pine beetle (MPB) infestation in British Columbia (BC) has infected vast tracts of the province's forest lands over the last several years, and there is evidence that the beetle plague is now causing major devastation in urban areas. Fires are increasing in size and moving from surrounding forest lands into towns and cities in the province and have taken a toll on people and properties in urban areas. Storms and hurricanes have imposed damage on trees in urban areas in the Maritimes, Quebec and Ontario. This conference presented strategies for urban forest managers faced with a variety of disturbances. Issues concerning emergency preparedness and the role of utilities in urban forestry matters were examined and tools for valuing and marketing the urban forest were reviewed. Landscaping for the mitigation of fires was discussed along with tree hazard assessment techniques. The positive financial impact made to communities by their urban forests was emphasized and guidelines and support tools to help municipalities maintain and enhance their urban forests were outlined. The establishment of research priorities for urban forestry was recommended, as well as the identification of unique and threatened habitats both in, and near, large and small municipalities. Twenty-four presentations were given at this conference, of which 3 have been catalogued separately for inclusion in this database. refs., tabs., figs.

  20. Proceedings of the Canadian Institute's Power On conference : the latest strategies to maximize opportunities in Ontario's electricity sector

    International Nuclear Information System (INIS)

    2004-01-01

    This conference provided a forum for reviewing strategies for Ontario's electricity sector with particular reference to electricity sector reform strategies and coal phase-out commitments. A supply adequacy outlook in terms of projected demand growth and generation mix and capacity was presented by the Independent Market Operator (IMO) along with issues concerning rising energy costs in various jurisdictions. Consumer adaptation to new pricing structures was discussed as well as generation investment needs to the year 2020. Government policies and commitments in the electricity sector were reviewed, as well as issues related to emissions and the impacts of air pollution. Renewable energy portfolios were also discussed along with issues concerning infrastructure adequacy. Imports of power and the expansion of transmission capabilities between Ontario and surrounding jurisdictions were reviewed and various opportunities from Manitoba were explored. Other topics of discussion included issues concerning pricing mechanisms; cost recovery; the development of effective buying strategies; and electricity purchasing for large energy consumers. The conference featured 23 presentations, of which 8 have been catalogued separately for inclusion in this database. tabs., figs

  1. Papers of a Canadian Institute conference : Unconventional gas symposium : Tight gas, gas shales, coalbed methane, gas hydrates

    International Nuclear Information System (INIS)

    2003-01-01

    This symposium provided an opportunity for participants to learn from gas industry leaders in both Canada and the United States, different strategies to cost-effectively develop unconventional gas resources. In particular, the representative from EnCana Corporation discussed the results of tight gas drilling in Northeastern British Columbia. The speaker for MGV Energy reported on the outcome of test drilling for coalbed methane (CBM) in Southern Alberta. The economic development of tight gas reservoirs in the United States Permian Basin was discussed by the speaker representing BP America Production Company. The role of unconventional gas in the North American natural gas supply and demand picture was dealt with by TransCanada PipeLines Limited and Canadian Gas Potential Committee. The trend for natural gas prices in North America was examined by Conoco Inc. The Geological Survey of Canada addressed the issue of gas hydrate potential in the Mackenzie Delta Mallik Field. In addition, one presentation by El Paso Production Company discussed the successful drilling for deep, tight gas and CBM in the United States. There were nine presentations at this symposium, of which three were indexed separately for inclusion in this database. refs., tabs., figs

  2. Knowledge translation: an overview and recommendations in relation to the Fourth Canadian Consensus Conference on the Diagnosis and Treatment of Dementia

    Science.gov (United States)

    2013-01-01

    The growing population of persons with dementia in Canada and the provision of quality care for this population is an issue that no healthcare authority will escape. Physicians often view dementia as a difficult and time-consuming condition to diagnose and manage. Current evidence must be effectively transformed into usable recommendations for physicians; however, we know that use of evidence-based practice recommendations is a challenge in all realms of medical care, and failure to utilize these leads to less than optimal care for patients. Despite this expanding need for readily available resources, knowledge translation (KT) is often seen as a daunting, if not confusing, undertaking for researchers. Here we offer a brief introduction to the processes around KT, including terms and definitions, and outline some common KT frameworks including the knowledge to action cycle, the Promoting Action on Research Implementation in Health Services framework and the Consolidated Framework for Implementation Research. We also outline practical steps for planning and executing a KT strategy particularly around the implementation of recommendations for practice, and offer recommendations for KT planning in relation to the Fourth Canadian Consensus Conference on the Diagnosis and Treatment of Dementia. PMID:24565407

  3. Quantitative analysis of spatial variability of geotechnical parameters

    Science.gov (United States)

    Fang, Xing

    2018-04-01

    Geotechnical parameters are the basic parameters of geotechnical engineering design, while the geotechnical parameters have strong regional characteristics. At the same time, the spatial variability of geotechnical parameters has been recognized. It is gradually introduced into the reliability analysis of geotechnical engineering. Based on the statistical theory of geostatistical spatial information, the spatial variability of geotechnical parameters is quantitatively analyzed. At the same time, the evaluation of geotechnical parameters and the correlation coefficient between geotechnical parameters are calculated. A residential district of Tianjin Survey Institute was selected as the research object. There are 68 boreholes in this area and 9 layers of mechanical stratification. The parameters are water content, natural gravity, void ratio, liquid limit, plasticity index, liquidity index, compressibility coefficient, compressive modulus, internal friction angle, cohesion and SP index. According to the principle of statistical correlation, the correlation coefficient of geotechnical parameters is calculated. According to the correlation coefficient, the law of geotechnical parameters is obtained.

  4. Papers of the 2. annual Canadian Institute conference on managing natural gas price volatility : effective risk strategies for turbulent times

    International Nuclear Information System (INIS)

    2002-01-01

    The issue of how natural gas price volatility is affecting future energy projects was the focus of this conference. Discussions focused on the dynamics of supply and demand of natural gas in North America and how end-users are responding to price fluctuations. Methods by which storage can be used as an effective risk management tool was also on the agenda. The hedging strategies that work best for leading energy firms were described. It was noted that price volatility can be reduced through improved market transparency. Discussions also focused on credit risk in a volatile price environment. A total of 17 papers were presented of which 3 were indexed separately for inclusion in the database. tabs., figs

  5. Development of a prototype geotechnical report.

    Science.gov (United States)

    2014-12-01

    Archive geotechnical reports in the department contain valuable information such as site maps, : photographs, borehole data, laboratory and field test data, and design analyses. A proper use of the : information may bring significant cost saving for ...

  6. Geotechnical engineering of ocean waste disposal

    National Research Council Canada - National Science Library

    Demars, K. R; Chaney, Ronald C; Demars, Kenneth R

    1990-01-01

    Contents: 15 peer-reviewed papers on geotechnical test methods and procedures used for site evaluation, design, construction, and monitoring of both contaminated areas and waste disposal facilities in the marine environment...

  7. The NGDC Seafloor Sediment Geotechnical Database

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NGDC Seafloor Sediment Geotechnical Properties Database contains test engineering properties data coded by students at NGDC from primarily U.S. Naval...

  8. Conference summaries

    International Nuclear Information System (INIS)

    1987-01-01

    This volume contains summaries of 28 papers presented at the 27. conference of the Canadian Nuclear Association. These papers discuss the general situation of the Canadian nuclear industry and the CANDU reactor; dialogue with the public; the International Atomic Energy Agency; and economic goals and operating lessons. It also contains summaries of 70 papers presented at the 8. conference of the Canadian Nuclear Society, which discuss plant life extension; safety and the environment; reactor physics; thermalhydraulics; risk assessment; the CANDU spacer location and repositioning project; CANDU operations; safety research after Chernobyl; fuel channels; and nuclear technology developments. The individual papers are also available in INIS-mf--13673 (CNA), and INIS-mf--12909 (CNS). (L.L.)

  9. Geotechnical instrumentation for repository shafts

    International Nuclear Information System (INIS)

    Lentell, R.L.; Byrne, J.

    1993-01-01

    The US Congress passed the Nuclear Waste Policy Act in 1980, which required that three distinctly different geologic media be investigated as potential candidate sites for the permanent disposal of high-level nuclear waste. The three media that were selected for study were basalt (WA), salt (TX, LA, MS, UT), and tuff (NV). Preliminary Exploratory Shaft Facilities (ESF) designs were prepared for seven candidate salt sites, including bedded and domal salt environments. A bedded-salt site was selected in Deaf Smith County, TX for detailed site characterization studies and ESF Final Design. Although Congress terminated the Salt Repository Program in 1988, Final Design for the Deaf Smith ESF was completed, and much of the design rationale can be applied to subsequent deep repository shafts. This paper presents the rationale for the geotechnical instrumentation that was designed for construction and operational performance monitoring of the deep shafts of the in-situ test facility. The instrumentation design described herein can be used as a general framework in designing subsequent instrumentation programs for future high-level nuclear waste repository shafts

  10. Comparison study of selected geophysical and geotechnical parameters

    DEFF Research Database (Denmark)

    Nissen, Randi Warncke; Poulsen, Søren Erbs

    Successful foundation of constructions relies on accurate characterization of the geotechnical properties of the subsurface. By implementing data from geophysical surveys, the placement of geotechnical drillings can be significantly improved, potentially reducing the number of required drillings....... This case study is mainly to compare geophysical investigations (MEP/IP) with existing PACES data and information from geotechnical drillings....

  11. Geotechnics - the key to ground water protection

    DEFF Research Database (Denmark)

    Baumann, Jens; Foged, Niels; Jørgensen, Peter

    2000-01-01

    During the past 5 to 10 years research into ground water protection has proved that fractures in clay till may increase the hydraulic conductivity and herby the vulnerability of the ground water considerably. However, research has not identified a non-expensive and efficient method to map...... the fracture conditions of the various clay tills. Tests performed at the Danish Geotechnical Institute with large undisturbed columns of clay till show that there is a relation between the strength of the clay till and the hydraulic conductivity. Geotechnical methods may therefore be the key to determine...

  12. Geotechnical Classification of Søvind Marl

    DEFF Research Database (Denmark)

    Grønbech, Gitte Lyng; Nielsen, Benjaminn Nordahl; Ibsen, Lars Bo

    2012-01-01

    This article deals with the geotechnical classification properties of a Danish Eocene clay known as Søvind Marl. A large development is happening on locations where the soil consists of different varieties Danish Eocene clays. This gives a need for a better understanding of the properties...... and behavior of the clay. The geotechnical properties of the clay are very unique, due to the very high plasticity index of the soil, which is significantly higher than any other known clay. The Søvind Marl is a Tertiary deposit from the Eocene period, deposited under environmental circumstances very similar...

  13. Canadian Helicobacter Study Group Consensus Conference: Update on the Approach to Helicobacter Pylori Infection in Children and Adolescents – an Evidence-Based Evaluation

    Directory of Open Access Journals (Sweden)

    Nicola L Jones

    2005-01-01

    Full Text Available As an update to previously published recommendations for the management of Helicobacter pylori infection, an evidence-based appraisal of 14 topics was undertaken in a consensus conference sponsored by the Canadian Helicobacter Study Group. The goal was to update guidelines based on the best available evidence using an established and uniform methodology to address and formulate recommendations for each topic. The degree of consensus for each recommendation is also presented. The clinical issues addressed and recommendations made were: population-based screening for H pylori in asymptomatic children to prevent gastric cancer is not warranted; testing for H pylori in children should be considered if there is a family history of gastric cancer; the goal of diagnostic interventions should be to determine the cause of presenting gastrointestinal symptoms and not the presence of H pylori infection; recurrent abdominal pain of childhood is not an indication to test for H pylori infection; H pylori testing is not required in patients with newly diagnosed gastroesophageal reflux disease; H pylori testing may be considered before the use of long-term proton pump inhibitor therapy; testing for H pylori infection should be considered in children with refractory iron deficiency anemia when no other cause has been found; when investigation of pediatric patients with persistent or severe upper abdominal symptoms is indicated, upper endoscopy with biopsy is the investigation of choice; the 13C-urea breath test is currently the best noninvasive diagnostic test for H pylori infection in children; there is currently insufficient evidence to recommend stool antigen tests as acceptable diagnostic tools for H pylori infection; serological antibody tests are not recommended as diagnostic tools for H pylori infection in children; first-line therapy for H pylori infection in children is a twice-daily, triple-drug regimen comprised of a proton pump inhibitor plus two

  14. Canadian Helicobacter Study Group Consensus Conference: Update on the approach to Helicobacter pylori infection in children and adolescents--an evidence-based evaluation.

    Science.gov (United States)

    Bourke, Billy; Ceponis, Peter; Chiba, Naoki; Czinn, Steve; Ferraro, Richard; Fischbach, Lori; Gold, Ben; Hyunh, Hien; Jacobson, Kevan; Jones, Nicola L; Koletzko, Sibylle; Lebel, Sylvie; Moayyedi, Paul; Ridell, Robert; Sherman, Philip; van Zanten, Sander; Beck, Ivan; Best, Linda; Boland, Margaret; Bursey, Ford; Chaun, Hugh; Cooper, Geraldine; Craig, Brian; Creuzenet, Carole; Critch, Jeffrey; Govender, Krishnasamy; Hassall, Eric; Kaplan, Alan; Keelan, Monica; Noad, Garth; Robertson, Marli; Smith, Lesley; Stein, Markus; Taylor, Diane; Walters, Thomas; Persaud, Robin; Whitaker, Scott; Woodland, Robert

    2005-07-01

    As an update to previously published recommendations for the management of Helicobacter pylori infection, an evidence-based appraisal of 14 topics was undertaken in a consensus conference sponsored by the Canadian Helicobacter Study Group. The goal was to update guidelines based on the best available evidence using an established and uniform methodology to address and formulate recommendations for each topic. The degree of consensus for each recommendation is also presented. The clinical issues addressed and recommendations made were: population-based screening for H. pylori in asymptomatic children to prevent gastric cancer is not warranted; testing for H. pylori in children should be considered if there is a family history of gastric cancer; the goal of diagnostic interventions should be to determine the cause of presenting gastrointestinal symptoms and not the presence of H. pylori infection; recurrent abdominal pain of childhood is not an indication to test for H. pylori infection; H. pylori testing is not required in patients with newly diagnosed gastroesophageal reflux disease; H. pylori testing may be considered before the use of long-term proton pump inhibitor therapy; testing for H. pylori infection should be considered in children with refractory iron deficiency anemia when no other cause has been found; when investigation of pediatric patients with persistent or severe upper abdominal symptoms is indicated, upper endoscopy with biopsy is the investigation of choice; the 13C-urea breath test is currently the best noninvasive diagnostic test for H. pylori infection in children; there is currently insufficient evidence to recommend stool antigen tests as acceptable diagnostic tools for H. pylori infection; serological antibody tests are not recommended as diagnostic tools for H. pylori infection in children; first-line therapy for H. pylori infection in children is a twice-daily, triple-drug regimen comprised of a proton pump inhibitor plus two antibiotics

  15. Canadian Cardiovascular Society 2009 Consensus Conference on the management of adults with congenital heart disease: Outflow tract obstruction, coarctation of the aorta, tetralogy of Fallot, Ebstein anomaly and Marfan’s syndrome

    Science.gov (United States)

    Silversides, Candice K; Beauchesne, Luc; Bradley, Timothy; Connelly, Michael; Niwa, Koichiro; Mulder, Barbara; Webb, Gary; Colman, Jack; Therrien, Judith

    2010-01-01

    With advances in pediatric cardiology and cardiac surgery, the population of adults with congenital heart disease (CHD) has increased. In the current era, there are more adults with CHD than children. This population has many unique issues and needs. Since the 2001 Canadian Cardiovascular Society Consensus Conference report on the management of adults with CHD, there have been significant advances in the field of adult CHD. Therefore, new clinical guidelines have been written by Canadian adult CHD physicians in collaboration with an international panel of experts in the field. Part II of the guidelines includes recommendations for the care of patients with left ventricular outflow tract obstruction and bicuspid aortic valve disease, coarctation of the aorta, right ventricular outflow tract obstruction, tetralogy of Fallot, Ebstein anomaly and Marfan’s syndrome. Topics addressed include genetics, clinical outcomes, recommended diagnostic workup, surgical and interventional options, treatment of arrhythmias, assessment of pregnancy risk and follow-up requirements. The complete document consists of four manuscripts that are published online in the present issue of The Canadian Journal of Cardiology. The complete document and references can also be found at www.ccs.ca or www.cachnet.org. PMID:20352138

  16. Hydrogeological And Geotechnical Investigations Of Gully Erosion ...

    African Journals Online (AJOL)

    Consequently, hydrogeological and geotechnical studies of gully erosion sites were carried out in order to provide information on the genesis and continual expansion of gullies in the area. The results indicate that gullies are located in the upper aquifer of the Benin Formation (Coastal Plain Sands). The estimated hydraulic ...

  17. Geotechnical hazards from large earthquakes and heavy rainfalls

    CERN Document Server

    Kazama, Motoki; Lee, Wei

    2017-01-01

    This book is a collection of papers presented at the International Workshop on Geotechnical Natural Hazards held July 12–15, 2014, in Kitakyushu, Japan. The workshop was the sixth in the series of Japan–Taiwan Joint Workshops on Geotechnical Hazards from Large Earthquakes and Heavy Rainfalls, held under the auspices of the Asian Technical Committee No. 3 on Geotechnology for Natural Hazards of the International Society for Soil Mechanics and Geotechnical Engineering. It was co-organized by the Japanese Geotechnical Society and the Taiwanese Geotechnical Society. The contents of this book focus on geotechnical and natural hazard-related issues in Asia such as earthquakes, tsunami, rainfall-induced debris flows, slope failures, and landslides. The book contains the latest information and mitigation technology on earthquake- and rainfall-induced geotechnical natural hazards. By dissemination of the latest state-of-the-art research in the area, the information contained in this book will help researchers, des...

  18. Adaptation of the ITER facility design to a Canadian site

    International Nuclear Information System (INIS)

    Smith, S.

    2001-01-01

    This paper presents the status of Canadian efforts to adapt the newly revised ITER facility design to suit the specific characteristics of the proposed Canadian site located in Clarington, west of Toronto, Ontario. ITER Canada formed a site-specific design team in 1999, comprising participants from three Canadian consulting companies to undertake this work. The technical aspects of this design activity includes: construction planning, geotechnical investigations, plant layout, heat sink design, electrical system interface, site-specific modifications and tie-ins, seismic design, and radwaste management. These areas are each addressed in this paper. (author)

  19. Geotechnical properties of Egyptian collapsible soils

    Directory of Open Access Journals (Sweden)

    Khaled E. Gaaver

    2012-09-01

    Full Text Available The risk of constructing structures on collapsible soils presents significant challenges to geotechnical engineers due to sudden reduction in volume upon wetting. Identifying collapsible soils when encountered in the field and taking the needed precautions should substantially reduce the risk of such problems usually reported in buildings and highways. Collapsible soils are those unsaturated soils that can withstand relatively high pressure without showing significant change in volume, however upon wetting; they are susceptible to a large and sudden reduction in volume. Collapsible soils cover significant areas around the world. In Egypt, collapsible soils were observed within the northern portion of the western desert including Borg El-Arab region, and around the city of Cairo in Six-of-October plateau, and Tenth-of-Ramadan city. Settlements associated with development on untreated collapsible soils usually lead to expensive repairs. One method for treating collapsible soils is to densify their structure by compaction. The ongoing study presents the effect of compaction on the geotechnical properties of the collapsible soils. Undisturbed block samples were recovered from test pits at four sites in Borg El-Arab district, located at about 20 km west of the city of Alexandria, Egypt. The samples were tested in both unsoaked and soaked conditions. Influence of water inundation on the geotechnical properties of collapsible soils was demonstrated. A comparative study between natural undisturbed and compacted samples of collapsible soils was performed. An attempt was made to relate the collapse potential to the initial moisture content. An empirical correlation between California Bearing Ratio of the compacted collapsible soils and liquid limit was adopted. The presented simple relationships should enable the geotechnical engineers to estimate the complex parameters of collapsible soils using simple laboratory tests with a reasonable accuracy.

  20. Geotechnical and mineralological Konyaalti (Antalya, Turkey) clays

    International Nuclear Information System (INIS)

    Acar, Mustafa Hilami; Uzer, A.U.; Altunsoy, M.

    2008-01-01

    Geotechnical and mineralogical characteristics of blue-green clays of the Harbour District existing inside the boundaries of Antalya Konyaalti Municipality were investigated with comprehensive field and laboratory tests. Today, building construction in this district is carried out without any prior qualified geotechnical investigations taking place. Undisturbed and disturbed soil specimens were taken from 12 drilled boreholes at 1.5 m intervals and down 30 m deep. Shelby tubes samples were retrieved and SPT were carried out in order to determine soil profile and geotechnical properties. After comparing the laboratory and field test results, it was observed that they were in agreement. Strength and compressibility characteristics of the soil were defined with the correlations using laboratory and field test results. Since the region has been formed of lagoon-sedimented clays, rock analysis was done on two specimens achieved from various depths along the soil profile. XRD analyses on eleven specimens were also conducted. Unconfined compressive strength (qu), undrained cohesion (Cu) and compression index (Cc) varies between 40 kN/m2, 7.0 kN/m2 and 90 kN/m2, 0.095 and 0.38, respectively. (author)

  1. Geotechnical Mapping of An-Najaf City, Iraq

    Directory of Open Access Journals (Sweden)

    Nadher Hassan Al-Baghdadi

    2016-12-01

    Full Text Available The present paper submits a set geotechnical maps for the area of An-Najaf city, by using contour lines to represent the different geotechnical properties of the soil. The present research work is very important step toward preparing a geotechnical database for this region, to complete the geotechnical database over all the country, (Iraq. Using such a database is very important in geotechincal investigation, reconnaissance phase, of construction projects. Within this phase of site investigation, numbers, depths and locations of the boreholes needed, will be determined. A well known commercial software (SURFER 11, was used to produce the all the contour maps of geotechnical properties presented herein. A forty nine (49 contour maps were produced to cover the variations, within the geotechnical properties of the soil, to produce realistic description to these soil properties. Both Google maps and Universal Transverse Mercator coordinate system (UTM have been used in the contour maps for easy use.

  2. Geoscience research for the Canadian nuclear fuel waste management program

    International Nuclear Information System (INIS)

    Whitaker, S.H.

    1987-01-01

    The Canadian Nuclear Fuel Waste Management Program is assessing the concept of deep disposal of nuclear fuel waste in plutonic rock. As part of that assessment, a broad program of geoscience and geotechnical work has been undertaken to develop methods for characterizing sites, incorporating geotechnical data into disposal facility design, and incorporating geotechnical data into environmental and safety assessment of the disposal system. General field investigations are conducted throughout the Precambrian Shield, subsurface investigations are conducted at designated field research areas, and in situ rock mass experiments are being conducted in an Underground Research Laboratory. Samples from the field research areas and elsewhere are subjected to a wide range of tests and experiments in the laboratory to develop an understanding of the physical and chemical processes involved in ground-water-rock-waste interactions. Mathematical models to simulate these processes are developed, verified and validated. 114 refs.; 13 figs

  3. Proceedings of the Canadian Institute conference on supply chain management in the oil and gas industry : major capital construction projects, maintenance, repair and operations

    International Nuclear Information System (INIS)

    2005-01-01

    Many companies are now being forced to focus on careful budgeting to ensure that the capital costs of large-scale construction projects do not exceed their budgets. Operators are now investigating the role of supply chain management in reducing project costs. This conference provided a forum for the discussion of issues related to large construction projects for supply chain management in the oil and gas industry. Participants at the conference discussed methods of negotiating with contractors in order to manage higher prices for steel and other commodities. Best practices for maintaining effective purchaser-contractor relations were discussed along with cost benchmarks in contracts and management planning techniques for supply chain processes. The benefits of adopting vendor-managed inventory systems were also examined. Sourcing strategies were presented and issues related to transportation were reviewed along with various planning models. The conference featured 16 presentations. tabs., figs

  4. Proceedings of the Canadian Dam Association's 2005 annual conference : 100 years of dam experience : balancing tradition and innovation. CD-ROM ed.

    International Nuclear Information System (INIS)

    2004-09-01

    This conference provided a forum to promote discussion on improving the management and safety of dams. It featured 8 technical sessions as well as workshops to discuss dam safety guidelines and guidelines for extreme flood analyses and their applications. It also featured workshops on instrumentation and performance monitoring of dams; tailing dam closures and reclamation; and, practical approaches to emergency preparedness for dam owners. The discussions provided details on large hydropower development projects, their innovations in environmental impact assessment, mitigation, and monitoring. The conference included a technical component led by experts on dams and tailings facilities. Recent developments in dam construction were reviewed along with discharge and debris management, tailings dam issues, asset management, seismic issues, public safety, seepage monitoring, flow control, dam rehabilitation, concrete testing, hydrotechnical issues, risk assessment methodology, and safety guidelines. All 24 presentations at this conference have been catalogued separately for inclusion in this database

  5. Proceedings of the Canadian Institute's conference on fundamentals of coalbed methane and shale gas : comprehensive overviews of leading project management strategies, effective techniques, new regulations, and key measurements for success

    International Nuclear Information System (INIS)

    2005-01-01

    Forecasts have indicated that despite some uncertainties in Coalbed methane (CBM) technology and concerns over the environmental effects of CBM production, the CBM industry is expected to grow rapidly over the next decade. This conference reviewed a variety of CBM project management strategies adopted by Canadian companies, ranging from initial site assessment through to commercial production. Pipeline and infrastructure requirements for the CBM industry were reviewed, and an overview of CBM regulations was provided. Exploration techniques and recommended practices for CBM hydraulic fracturing were presented. It was noted that in addition to environmental concerns over surface water discharge of CBM produced water, subsurface management issues are being increasingly scrutinized by environmentalists. Various commercialization strategies for CBM production were also reviewed, including well spacing management techniques; infrastructure demands and capitalized costs. Factors to ensure cost-effective high volume production in the shale gas industry were also reviewed. Of the 23 presentations given at this conference, 8 were catalogued separately for inclusion in this database. refs., tabs., figs

  6. Proceedings of the 14. Annual national conference of the Canadian Wind Energy Association: emissions trading and green power : profitability for buyers and sellers

    International Nuclear Information System (INIS)

    1998-01-01

    Renewable energy sources are gaining significance in the newly deregulated electricity markets. While much emphasis was placed on wind energy, this conference also presented the advantages of other renewables including solar, small hydro, and the capturing of methane gas from landfills. Consumers have become aware that, compared to fossil fuels, renewables provide many advantages including reduced atmospheric emissions and improved air quality. Renewable energy sources are regarded as a means to reduce greenhouse gas emissions and a response to the threat of climate change. The Conference addressed customer attitudes towards green energy, government initiatives in promoting renewable energy sources, and the mechanics and marketing of green power. refs., tabs., figs

  7. Proceedings of the 2007 annual conference of the Canadian Society for Civil Engineering : where the road ends, ingenuity begins : cold regions civil engineering in Canada's North

    International Nuclear Information System (INIS)

    Hodgins, K.L.W.

    2007-01-01

    This conference provided a forum to discuss recent developments in all areas of civil engineering. It provided an opportunity for national and international delegates from industrial, research, and academic institutions to interact and learn about innovative technologies in the different areas of civil engineering and to identify future directions. The presentations addressed a broad range of issues, such as the need for sustainable infrastructure while improving the safety of roads, dams, water supply and sewage treatment systems. Technical sessions addressed infrastructure management issues, risk assessment, hydrotechnical engineering and transportation engineering. The conference featured 98 presentations, of which 25 have been catalogued separately for inclusion in this database

  8. Papers of the Canadian Institute's 3. annual conference on public relations for the energy industry : best practices for communication in volatile energy markets

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    In recent years, the energy industry has been subjected to intense public scrutiny and has faced difficult years that have had a damaging effect on its reputation. The industry is now faced with the challenge of rebuilding public confidence and trust. This conference provides some of the tools needed for communications departments to succeed in rebuilding the image of the industry. The topics of discussion ranged from managing public perception, communication challenges regarding high energy prices, joint ventures, and social responsibility regarding environmental impacts. Strategies to prevent crisis situations were also described. The conference featured 13 presentations, of which 5 have been indexed separately for inclusion in this database. refs., tabs., figs.

  9. Geotechnical support and topical studies for nuclear waste geologic repositories

    International Nuclear Information System (INIS)

    1990-12-01

    This multidisciplinary project was initiated in fiscal year 1986. It comprises two major interrelated tasks, technical assistance and topical studies. The present report lists the technical reviews and comments made during the fiscal year 1989 and summarizes the technical progress of the topical studies. The major task was a study of the mechanical, hydraulic, geophysical and geochemical properties of fractures in geologic rock masses. In the area of technical assistance, there were a total of 30 geotechnical support activities, including reviews of 15 study plans (SP) and participation in 5 SP Review Workshops; in-depth multidisciplinary review of 5 Exploratory Shaft Facility (ESF) Study Plans and presentation of results to DOE; preparation and revision of a white paper and proposed work statement on preclosure monitoring and performance confirmation as an outgrowth of a request made by DOE to LBL; the hosting of a DOE program review; with DOE's encouragement, preparation of 8 papers for the International High-Level Radioactive Waste Management Conference to be held in April, 1990 in Las Vegas, Nevada; and 5 instances of general technical assistance to DOE

  10. Geotechnical Monitoring of the Automobile Road

    Science.gov (United States)

    Matsiy, Vladimir

    2017-12-01

    In the present article, the results of geotechnical monitoring of A-147 automobile road “Dzhubga-Sochi” are given. Some sections of the automobile road suffered from the landslide adjustment movements; it resulted in many deformations of the retaining structures, the damages of the roadbed and ground crawling over the retaining walls. The observation data made it possible to specify the borders of the active landslide and to form a forecast of the landslide activity in the sections of the automobile roads. Due to monitoring being carried out, there was substantiated the necessity to correct the service forms and records connected with the automobile road reconstruction.

  11. Comparative evaluation of geotechnical properties of red tropical ...

    African Journals Online (AJOL)

    Geotechnical tests were carried out on a total of six samples of red tropical soils developed over sedimentary and Basement terrains, made up of three soils and three termite hills samples. The soil samples were subjected to geotechnical analyses which included the Particle size analysis, Specific Gravity, Atterberg Limits ...

  12. Geotechnical Analysis Report for July 2002 - June 2003

    International Nuclear Information System (INIS)

    2004-01-01

    This Geotechnical Analysis Report (GAR) presents and interprets the geotechnical data from the underground excavations at the Waste Isolation Pilot Plant (WIPP). The data, which are obtained as part of a regular monitoring program, are used to characterize conditions, to compare actual performance to the design assumptions, and to evaluate and forecast the performance of the underground excavations.

  13. Geotechnical Analysis Report for July 2002 - June 2003

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions LLC

    2004-03-03

    This Geotechnical Analysis Report (GAR) presents and interprets the geotechnical data from the underground excavations at the Waste Isolation Pilot Plant (WIPP). The data, which are obtained as part of a regular monitoring program, are used to characterize conditions, to compare actual performance to the design assumptions, and to evaluate and forecast the performance of the underground excavations.

  14. Geotechnical Survey, Dredgeability Of Soil Sediments And Siltation ...

    African Journals Online (AJOL)

    Geotechnical Survey, Dredgeability Of Soil Sediments And Siltation Volume Of Brimsu Water Reservoir. ... of the sediments was characterized by geo-technical descriptor terms, indicating that the sediments could be dredged using cutter-type dredger for excava-tion, and transported by hydraulic pipelines to disposal sites.

  15. African regional conferences as an indicator of research trends in South Africa

    CSIR Research Space (South Africa)

    Paige-Green, P

    2011-07-01

    Full Text Available The 2011 African Regional Conference on Soil Mechanics and Geotechnical Engineering is the 15th in the series of 4 yearly conferences. The majority of the early conferences were held in sub-Saharan Africa with significant contributions from South...

  16. Correlations of soil and rock properties in geotechnical engineering

    CERN Document Server

    Ameratunga, Jay; Das, Braja M

    2016-01-01

    This book presents a one-stop reference to the empirical correlations used extensively in geotechnical engineering. Empirical correlations play a key role in geotechnical engineering designs and analysis. Laboratory and in situ testing of soils can add significant cost to a civil engineering project. By using appropriate empirical correlations, it is possible to derive many design parameters, thus limiting our reliance on these soil tests. The authors have decades of experience in geotechnical engineering, as professional engineers or researchers. The objective of this book is to present a critical evaluation of a wide range of empirical correlations reported in the literature, along with typical values of soil parameters, in the light of their experience and knowledge. This book will be a one-stop-shop for the practising professionals, geotechnical researchers and academics looking for specific correlations for estimating certain geotechnical parameters. The empirical correlations in the forms of equations a...

  17. Probabilistic approaches for geotechnical site characterization and slope stability analysis

    CERN Document Server

    Cao, Zijun; Li, Dianqing

    2017-01-01

    This is the first book to revisit geotechnical site characterization from a probabilistic point of view and provide rational tools to probabilistically characterize geotechnical properties and underground stratigraphy using limited information obtained from a specific site. This book not only provides new probabilistic approaches for geotechnical site characterization and slope stability analysis, but also tackles the difficulties in practical implementation of these approaches. In addition, this book also develops efficient Monte Carlo simulation approaches for slope stability analysis and implements these approaches in a commonly available spreadsheet environment. These approaches and the software package are readily available to geotechnical practitioners and alleviate them from reliability computational algorithms. The readers will find useful information for a non-specialist to determine project-specific statistics of geotechnical properties and to perform probabilistic analysis of slope stability.

  18. Geotechnical design of underground slate mines

    International Nuclear Information System (INIS)

    Iglesias Comesaña, C.; Taboada Castro, J.; Arzúa Touriño, J.; Giráldez Pérez, E.; Martín Suárez, J.M.

    2017-01-01

    Slate is one of the most important natural materials in Spain, with a potent extractive and processing industry concentrated in the autonomous communities of Galicia, Castile and León. Thanks to its resistance to external agents, its impermeability and its excellent cleavability, slate is used as for roofing and tiling. Almost all the active exploitations in our country where this resource is extracted are open pit mines, where the exploitation ratios have nearly reached their economic limit, making it necessary to look for alternatives that will allow the mining works to be continued. Underground mining is a solution that offers low exploitation ratios, with low spoil generation. The room-and-pillar method with barrier pillars is usually applied for the exploitation of slate deposits. There are several factors to be taken into account when designing a mine (economic, logistical, geotechnical, technical, environmental…), especially for an underground mine. This study focuses on the geotechnical design process of a room-and-pillar underground mine, based on the tributary area theory, the analysis of the tensions in the ground with numerical methods and the choice of an appropriate reinforcement in view of the expected instabilities. This explanation is completed with an example of a design that includes the estimate exploitation rates and production. [es

  19. Physical modelling and testing in environmental geotechnics

    International Nuclear Information System (INIS)

    Garnier, J.; Thorel, L.; Haza, E.

    2000-01-01

    The preservation of natural environment has become a major concern, which affects nowadays a wide range of professionals from local communities administrators to natural resources managers (water, wildlife, flora, etc) and, in the end, to the consumers that we all are. Although totally ignored some fifty years ago, environmental geotechnics has become an emergent area of study and research which borders on the traditional domains, with which the geo-technicians are confronted (soil and rock mechanics, engineering geology, natural and anthropogenic risk management). Dedicated to experimental approaches (in-situ investigations and tests, laboratory tests, small-scale model testing), the Symposium fits in with the geotechnical domains of environment and transport of soil pollutants. These proceedings report some progress of developments in measurement techniques and studies of transport of pollutants in saturated and unsaturated soils in order to improve our understanding of such phenomena within multiphase environments. Experimental investigations on decontamination and isolation methods for polluted soils are discussed. The intention is to assess the impact of in-situ and laboratory tests, as well as small-scale model testing, on engineering practice. One paper is analysed in INIS data base for its specific interest in nuclear industry. The other ones, concerning the energy, are analyzed in ETDE data base

  20. Physical modelling and testing in environmental geotechnics

    Energy Technology Data Exchange (ETDEWEB)

    Garnier, J.; Thorel, L.; Haza, E. [Laboratoire Central des Ponts et Chaussees a Nantes, 44 - Nantes (France)

    2000-07-01

    The preservation of natural environment has become a major concern, which affects nowadays a wide range of professionals from local communities administrators to natural resources managers (water, wildlife, flora, etc) and, in the end, to the consumers that we all are. Although totally ignored some fifty years ago, environmental geotechnics has become an emergent area of study and research which borders on the traditional domains, with which the geo-technicians are confronted (soil and rock mechanics, engineering geology, natural and anthropogenic risk management). Dedicated to experimental approaches (in-situ investigations and tests, laboratory tests, small-scale model testing), the Symposium fits in with the geotechnical domains of environment and transport of soil pollutants. These proceedings report some progress of developments in measurement techniques and studies of transport of pollutants in saturated and unsaturated soils in order to improve our understanding of such phenomena within multiphase environments. Experimental investigations on decontamination and isolation methods for polluted soils are discussed. The intention is to assess the impact of in-situ and laboratory tests, as well as small-scale model testing, on engineering practice. One paper has been analyzed in INIS data base for its specific interest in nuclear industry.

  1. Papers of a Canadian Institute conference : Tapping into new opportunities in oil sands supply and infrastructure : natural gas, diluent, pipelines, cogeneration

    International Nuclear Information System (INIS)

    2003-01-01

    Participants at this conference were provided the opportunity to hear various views of several industry leaders on topics related to oil sands supply and infrastructure. Some of the issues addressed were: the latest project developments and pipeline infrastructure expansion initiatives in the oil sands industry; the growing natural gas supply requirements for oil sands production; how to effectively manage stakeholder issues in the context of rapid growth; an update on the supply and demand balance for diluent; demand for cogeneration and the implications of transmission system congestion; and, market development prospects for heavy crude and the need for additional refinery capacity. The Minister of Alberta Economic Development also made a special presentation. There were fifteen presentations made at the conference, of which nine were indexed separately for inclusion in this database. refs., tabs., figs

  2. Proceedings of the Canadian Institute's 3. annual conference on generation adequacy in Ontario : strategies to increase capacity to ensure a reliable electricity supply in Ontario

    International Nuclear Information System (INIS)

    2006-01-01

    This conference provided a forum for the discussion of issues related to generation adequacy in Ontario. Members of the electricity industry as well as members from governmental and non-governmental agencies discussed a variety of recommendations for cost-effective reliable energy in Ontario. Issues related to the overhaul or replacement of nuclear power reactors and coal-fired generators in the province were reviewed. The status of various wind power projects in the province was examined along with issues related to interconnected power systems. Best practices for the planning and execution of electricity infrastructure projects were also reviewed, and issues related to stakeholder involvement in electricity generation projects were discussed. The discussions also described recent developments in electricity generation in various jurisdictions in Canada and the United States. The conference featured 19 presentations, of which 7 have been catalogued separately for inclusion in this database. tabs., figs

  3. Proceedings of the Canadian Institute's winter 2004/2005 conference on energy marketing strategies : proactively defend your energy portfolios from winter price spikes

    International Nuclear Information System (INIS)

    2004-01-01

    This conference addressed the challenges facing energy markets with particular emphasis on the outlook of winter fuels and prices. It was attended by more than 50 energy marketing professionals representing petroleum producers, pipelines, wholesale marketers, storage companies, end users, banks and government. In order to plan portfolios and reduce risks to their bottom lines, buyers and sellers of energy must always be prepared for unexpected ice storms, major pipeline outages or geopolitical events. Merchants in the fuel supply chain depend on basic analysis, correlations and forecasts of supply/demand, transportation and inventory levels. The conference presented strategies and analysis on how commodity prices will move during the winter; North American supply/demand dynamics for natural gas, electricity, heating oils and natural gas liquids; the interplay of fuel storage and price; fuel switching and its impact on the market; portfolio planning; managing the link between weather and fuel prices; seasonal volatility; and, how liquefied natural gas (LNG) is affecting winter supply. The conference featured 16 presentations, of which 6 have been catalogued separately for inclusion in this database. tabs., figs

  4. Conference Proceedings

    International Nuclear Information System (INIS)

    1998-01-01

    National and international aspects of climate change were the central concern of this conference organized by the Alliance for Responsible Environmental Alternatives (AREA). AREA is a coalition of industry, labour and municipalities from across Canada which was created to reflect the views and represent the interests of Canadians in the Climate Change Debate. Ways and means of optimizing Canada's response to the Global Climate Change Challenge were discussed. Discussions emphasized issues regarding the effectiveness of voluntary mechanisms to reduce greenhouse gases, as opposed to government-mandated actions for achieving climate change targets. The issue of how a differentiated system for emission reduction targets and timetables can be implemented was also debated. The economic implications of climate change were outlined. Canada's national agenda and the likely outcomes of the Conference of Parties (COP 4) in Buenos Aires also received much attention. tabs., figs

  5. Geotechnical engineering for ocean waste disposal. An introduction

    Science.gov (United States)

    Lee, Homa J.; Demars, Kenneth R.; Chaney, Ronald C.; ,

    1990-01-01

    As members of multidisciplinary teams, geotechnical engineers apply quantitative knowledge about the behavior of earth materials toward designing systems for disposing of wastes in the oceans and monitoring waste disposal sites. In dredge material disposal, geotechnical engineers assist in selecting disposal equipment, predict stable characteristics of dredge mounds, design mound caps, and predict erodibility of the material. In canister disposal, geotechnical engineers assist in specifying canister configurations, predict penetration depths into the seafloor, and predict and monitor canister performance following emplacement. With sewage outfalls, geotechnical engineers design foundation and anchor elements, estimate scour potential around the outfalls, and determine the stability of deposits made up of discharged material. With landfills, geotechnical engineers evaluate the stability and erodibility of margins and estimate settlement and cracking of the landfill mass. Geotechnical engineers also consider the influence that pollutants have on the engineering behavior of marine sediment and the extent to which changes in behavior affect the performance of structures founded on the sediment. In each of these roles, careful application of geotechnical engineering principles can contribute toward more efficient and environmentally safe waste disposal operations.

  6. Quality assurance in management of geotechnical experiments for nuclear waste disposal

    International Nuclear Information System (INIS)

    Dormuth, K.W.; Simmons, G.R.

    1992-01-01

    Research and development (R and D) of technology for the disposal of nuclear fuel waste in plutonic rock is being undertaken in the Canadian Nuclear Fuel Waste Management Program, jointly funded by Atomic Energy of Canada Limited (AECL) Research and Ontario Hydro under the auspices of the CANDU Owner's Group. A major component of the R and D is geotechnical research to improve the understanding of the response of the host rock to a waste repository; investigate the interactions between the waste package, sealing systems, and rock; elucidate geotechnical factors affecting potential transport of waste elements from the repository; and establish and refine techniques and procedures for repository engineering. Nine major experimental activities are currently in various stages of planning and implementation at AECL's Underground Research Laboratory (URL). A general description of a quality assurance (QA) program developed at AECL for R and D on nuclear waste disposal has been published previously. This QA program is project-oriented and is designed specifically for and R and D environment. The full application of the QA program is being phased into the management of the operating phase experiments because some activities were under way prior to establishment of the QA program

  7. Nuclear fuel waste management program geotechnical studies of Eye-Dashwa Lakes research area rock properties

    International Nuclear Information System (INIS)

    Chernis, P.J.; Robertson, P.B.

    1992-05-01

    The Eye-Dashwa Lakes pluton near Atikokan Ontario has been used as a study area for the Canadian nuclear fuel waste management research program. The pluton consists predominately of granite. Fractures formed during cooling of the pluton were filled with a succession of different materials at different times. Measurements of a series of geophysical and geotechnical properties of rock samples are published here in this report, including especially microcrack and pore structures. An indication has been found that a larger proportion of the porosity of Whiteshell and Atikokan samples is contained in connecting pores, compared to other rocks. This may seem surprising in view of the finding that approximately 70% of the effective porosity of Atikokan samples is contained in pockets

  8. Geotechnical field data and analysis report

    International Nuclear Information System (INIS)

    1990-09-01

    The geotechnical Field Data and Analysis Report documents the geomechanical data collected at the Waste Isolation Pilot Plant up to June 30, 1989 and describes the conditions of underground openings from July 1, 1988 to June 30, 1989. The data is required to understand performance during operations and does not include data from tests performed to support performance assessment. In summary, the underground openings have performed in a satisfactory manner during the reporting period. This analysis is based primarily on the evaluation of instrumentation data, in particular the comparison of measured convergence with predictions, and the observations of exposed rock surfaces. The main concerns during this period have been the deterioration found in Site Preliminary Design Validation Test Rooms 1 and 2 and some spalling found in Panel 1. 14 refs., 45 figs., 11 tabs

  9. Reconsolidated Salt as a Geotechnical Barrier

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, Francis D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gadbury, Casey [USDOE Carlsbad Field Office, NM (United States)

    2015-11-01

    Salt as a geologic medium has several attributes favorable to long-term isolation of waste placed in mined openings. Salt formations are largely impermeable and induced fractures heal as stress returns to equilibrium. Permanent isolation also depends upon the ability to construct geotechnical barriers that achieve nearly the same high-performance characteristics attributed to the native salt formation. Salt repository seal concepts often include elements of reconstituted granular salt. As a specific case in point, the Waste Isolation Pilot Plant recently received regulatory approval to change the disposal panel closure design from an engineered barrier constructed of a salt-based concrete to one that employs simple run-of-mine salt and temporary bulkheads for isolation from ventilation. The Waste Isolation Pilot Plant is a radioactive waste disposal repository for defense-related transuranic elements mined from the Permian evaporite salt beds in southeast New Mexico. Its approved shaft seal design incorporates barrier components comprising salt-based concrete, bentonite, and substantial depths of crushed salt compacted to enhance reconsolidation. This paper will focus on crushed salt behavior when applied as drift closures to isolate disposal rooms during operations. Scientific aspects of salt reconsolidation have been studied extensively. The technical basis for geotechnical barrier performance has been strengthened by recent experimental findings and analogue comparisons. The panel closure change was accompanied by recognition that granular salt will return to a physical state similar to the halite surrounding it. Use of run-of-mine salt ensures physical and chemical compatibility with the repository environment and simplifies ongoing disposal operations. Our current knowledge and expected outcome of research can be assimilated with lessons learned to put forward designs and operational concepts for the next generation of salt repositories. Mined salt

  10. Reconsolidated Salt as a Geotechnical Barrier

    International Nuclear Information System (INIS)

    Hansen, Francis D.; Gadbury, Casey

    2015-01-01

    Salt as a geologic medium has several attributes favorable to long-term isolation of waste placed in mined openings. Salt formations are largely impermeable and induced fractures heal as stress returns to equilibrium. Permanent isolation also depends upon the ability to construct geotechnical barriers that achieve nearly the same high-performance characteristics attributed to the native salt formation. Salt repository seal concepts often include elements of reconstituted granular salt. As a specific case in point, the Waste Isolation Pilot Plant recently received regulatory approval to change the disposal panel closure design from an engineered barrier constructed of a salt-based concrete to one that employs simple run-of-mine salt and temporary bulkheads for isolation from ventilation. The Waste Isolation Pilot Plant is a radioactive waste disposal repository for defense-related transuranic elements mined from the Permian evaporite salt beds in southeast New Mexico. Its approved shaft seal design incorporates barrier components comprising salt-based concrete, bentonite, and substantial depths of crushed salt compacted to enhance reconsolidation. This paper will focus on crushed salt behavior when applied as drift closures to isolate disposal rooms during operations. Scientific aspects of salt reconsolidation have been studied extensively. The technical basis for geotechnical barrier performance has been strengthened by recent experimental findings and analogue comparisons. The panel closure change was accompanied by recognition that granular salt will return to a physical state similar to the halite surrounding it. Use of run-of-mine salt ensures physical and chemical compatibility with the repository environment and simplifies ongoing disposal operations. Our current knowledge and expected outcome of research can be assimilated with lessons learned to put forward designs and operational concepts for the next generation of salt repositories. Mined salt

  11. Papers of a Canadian Institute conference on generation adequacy in Ontario : essential updates on the state of generation capacity and the latest efforts to solve the supply crunch

    International Nuclear Information System (INIS)

    2004-01-01

    The issue of power generation and supply in Ontario was addressed at this conference which provided critical information on power supply and the Ontario government's plans for easing the power supply crisis. The state of existing generation assets and the feasibility of potential supply additions were also discussed. Specific issues such as pricing regulations, as well as broader issues such as market conditions and current energy policies were assessed. Planning, investment and issues such as demand-side management were discussed. The role of government, directions for the future, and the phasing out of coal power plants were important focal points. Nuclear power, water power and the search for reliable sources of supply were examined, including the possibility of importing hydro electricity. In addition, key objectives such as clean air strategies and the development of a renewable energy strategy were discussed and various options were identified. The conference featured 24 presentations, of which 8 have been catalogued separately for inclusion in this database. refs., tabs., figs

  12. Proceedings of the Canadian Institute's 4. annual oil sands supply and infrastructure conference : maximizing opportunity and mitigating risks in a rapidly growing market

    International Nuclear Information System (INIS)

    2006-01-01

    This conference addressed the challenges facing oil sands development, with particular reference to supply and infrastructure issues. Updates on oil sands markets and opportunities were presented along with strategies for mitigating risks in a rapidly growing market. The best practices for supplying a demanding market through supply shortages and high prices were identified along with policies that should be implemented to help overcome labour shortages. Some presentations expressed how commodities pricing and trends can impact business. Others showed how markets in China and the United States are prepared for oilsands products. The views of other international companies on oil sands was also discussed along with proposed plans to eliminate the infrastructure congestion and risks caused by expanding oil sands development. The challenges and benefits of investing in Alberta's oil sands were reviewed along with strategies to enhance upgrading and refining capacity in the province. Economic drivers and the creation of new markets were examined, and various export opportunities were reviewed along with industry management challenges concerning human resources, labour supply, training and education. The conference featured 10 presentations, of which 3 have been catalogued separately for inclusion in this database. refs., tabs., figs

  13. Abstracts and electronic proceedings of the Canadian Dam Association's 2009 annual conference : protecting people, property and the environment; Resumes et actes electroniques du congres annuel 2009 de l'Association canadienne des barrages : proteger les personnes, les biens et l'environnement

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    The Canadian Dam Association (CDA) is the Canadian leader in advancing knowledge and practices related to dams. This annual conference provided a professional development opportunity on a broad range of dam-related topics. The technical sessions addressed issues such as adaptation to climate change; the application of safety design for discharge facilities; risks associated with rockfill dams; underlying problems of design floods and dam safety; guidelines for public safety around dams and psychology of safety; the dam safety review process; and run-of-river hydro dams. During the related sessions, Canadian members of the International Committee on Large Dams (ICOLD) commented on international practice and developments. The workshops focused on incident investigations; reliability-centered maintenance; flow discharge gate reliability; piping damage to till core dams; and mining dams. The sessions of the conference were entitled: design floods and dam safety; dam breach flood modelling; dam safety management; public safety; mining dams; flood handling and modelling; case studies; ice loads on structures; seepage control; dam safety reviews and remediation; remote sensing for dams; protecting the environment; seismic hazard and response modelling; and the performance of dams in 2008 earthquake in Sichuan, China. The conference featured 61 presentations, of which 59 have been catalogued separately for inclusion in this database. refs., tabs., figs.

  14. Geotechnical properties of surface sediments in the INDEX area

    Digital Repository Service at National Institute of Oceanography (India)

    Khadge, N.H.

    As a part of the environmental impact assessment studies, geotechnical properties of sediments were determined in the Central Indian Basin. The undrained shear strength and index properties of the siliceous sediments were determined on 20 box cores...

  15. End-user interest in geotechnical data management systems.

    Science.gov (United States)

    2008-12-01

    In conducting geotechnical site investigations, large volumes of subsurface information and associated test data : are generated. The current practice relies on paper-based filing systems that are often difficult and cumbersome : to access by users. ...

  16. Geotechnical data management at the Virginia Department of Transportation.

    Science.gov (United States)

    2010-04-01

    This report describes the development and implementation of the geotechnical data management system at the Virginia Department of Transportation (VDOT). The purpose of this project was to develop a practical, comprehensive, enterprise-wide system for...

  17. Papers of the Canadian Institute conference on buying power in Ontario : critical starting-gate information evolving strategies to reduce costs and minimize risk

    International Nuclear Information System (INIS)

    2002-01-01

    Industry executives and senior government officials attended this conference to learn what to expect when the electricity market opens in Ontario. Topics of discussion included the new risks as well as hedging strategies to manage volatile electricity prices. Papers presented a status update regarding what services to expect from utilities and marketers in a deregulated market. Several presentations described Alberta's experience with deregulation and presented lessons that Ontario can learn to save time, money and how to best deal with electricity contracts. Methods to control and monitor energy consumption and energy costs internally were also described. A total of 14 papers were presented, of which 4 were indexed separately for inclusion in the database. tabs., figs

  18. Proceedings of the Canadian International Petroleum Conference 2005 and the 56. Annual Technical Meeting of the Petroleum Society of CIM : Because Technology Changes Everything. CD ed.

    International Nuclear Information System (INIS)

    2005-01-01

    This conference and trade show outlined the latest technologies associated with hydrocarbon exploration, petroleum geology, resource development, and enhanced recovery. It was attended by local and international participants in the petroleum sector. The 31 sessions highlighted the challenges facing the petroleum industry in terms of maturing basins and focused on issues such as business development and risk management; cold production of heavy oil; health, safety and regulatory issues; and environmental concerns regarding oil and gas development. The presentations were targeted for managers, engineers, technologists, geologists, and other petroleum industry specialists dealing with topical issues such as: well completion; well stimulation; well test analysis; thermal recovery; reservoir characterization; fluid characterization; numerical simulation; computerized simulation; emerging technology; thermal field projects; production operations; business development; and refining facilities. A total of 122 papers have been catalogued separately for inclusion in this database. (author)

  19. Canadian Cardiovascular Society Consensus Conference recommendations on heart failure update 2007: Prevention, management during intercurrent illness or acute decompensation, and use of biomarkers.

    Science.gov (United States)

    Arnold, J Malcom O; Howlett, Jonathan G; Dorian, Paul; Ducharme, Anique; Giannetti, Nadia; Haddad, Haissam; Heckman, George A; Ignaszewski, Andrew; Isaac, Debra; Jong, Philip; Liu, Peter; Mann, Elizabeth; McKelvie, Robert S; Moe, Gordon W; Parker, John D; Svendsen, Anna M; Tsuyuki, Ross T; O'Halloran, Kelly; Ross, Heather J; Rao, Vivek; Sequeira, Errol J; White, Michel

    2007-01-01

    Heart failure is common, yet it is difficult to treat. It presents in many different guises and circumstances in which therapy needs to be individualized. The Canadian Cardiovascular Society published a comprehensive set of recommendations in January 2006 on the diagnosis and management of heart failure, and the present update builds on those core recommendations. Based on feedback obtained through a national program of heart failure workshops during 2006, several topics were identified as priorities because of the challenges they pose to health care professionals. New evidence-based recommendations were developed using the structured approach for the review and assessment of evidence adopted and previously described by the Society. Specific recommendations and practical tips were written for the prevention of heart failure, the management of heart failure during intercurrent illness, the treatment of acute heart failure, and the current and future roles of biomarkers in heart failure care. Specific clinical questions that are addressed include: which patients should be identified as being at high risk of developing heart failure and which interventions should be used? What complications can occur in heart failure patients during an intercurrent illness, how should these patients be monitored and which medications may require a dose adjustment or discontinuation? What are the best therapeutic, both drug and nondrug, strategies for patients with acute heart failure? How can new biomarkers help in the treatment of heart failure, and when and how should BNP be measured in heart failure patients? The goals of the present update are to translate best evidence into practice, to apply clinical wisdom where evidence for specific strategies is weaker, and to aid physicians and other health care providers to optimally treat heart failure patients to result in a measurable impact on patient health and clinical outcomes in Canada.

  20. Managing geotechnical risk on US design-build transport projects

    Directory of Open Access Journals (Sweden)

    Kevin McLain

    2014-03-01

    Full Text Available Awarding design-build (DB contracts before a complete subsurface investigation is completed, makes mitigating the risk of differing site conditions difficult, if not impossible. The purpose of the study was to identify effective practices for managing geotechnical risk in DB projects, and it reports the results of a survey that included responses from 42 of 50 US state departments of transportation and a content analysis of DB requests for proposals from 26 states to gauge the client’s perspective, as well as 11 structured interviews with DB contractors to obtain the perspective from the other side of the DB contract.  A suite of DB geotechnical risk manage tools is presented based on the results of the analysis. Effective practices were found in three areas: enhancing communications on geotechnical issues before final proposals are submitted; the use of project-specific differing site conditions clauses; and expediting geotechnical design reviews after award. The major finding is that contract verbiage alone is not sufficient to transfer the risk of changed site conditions. The agency must actively communicate all the geotechnical information on hand at the time of the DB procurement and develop a contract strategy that reduces/retires the risk of geotechnical uncertainty as expeditiously as possible after award.

  1. Geotechnical field data and analysis report, July 1990--June 1991

    International Nuclear Information System (INIS)

    1992-03-01

    The Geotechnical Field Data and Analysis Report documents the geotechnical data from the underground excavations at the Waste Isolation Pilot Plant (WIPP) located near Carlsbad, New Mexico. The data are used to characterize conditions, confirm design assumption, and understand and predict the performance of the underground excavations during operations. During the construction of the principal underground access and experimental areas, reporting was on a quarterly basis. Since 1987, reporting has been carried out annually because additional excavations such as the waste storage panels, will take place gradually over an extended period. This report presents and analyzes data collected up to June 30, 1991. The two-volume format of the Geotechnical Field Data and Analysis Report was selected to meet the needs of several audiences. Volume I focuses on the geotechnical performance of the various underground facilities including the shafts, shaft stations, access drifts, test rooms, and waste storage areas. The results of excavation effects investigations, stratigraphic mapping, and the occurrence of brine are also documented. It provides an evaluation of the geotechnical aspects of performance in the context of the relevant design criteria. The depth and breadth of the evaluation for the different underground facilities varies according to the types and quantities of data that are available, and the complexity of the recorded geotechnical responses

  2. Geotechnical analysis report for July 1993--June 1994

    International Nuclear Information System (INIS)

    1995-08-01

    The geotechnical data from the underground excavations at the WIPP are interpreted and presented in this Geotechnical Analysis Report. The data are used to characterize conditions, assess design assumptions, and understand and predict the performance of the underground excavations during operations. The data are obtained as part of a regular monitoring program. The format of the Geotechnical Analysis Report was selected to meet the needs of several audiences. This report focuses on the geotechnical performance of the various underground facilities including the shafts, shaft stations, access drifts, experimental rooms, and waste storage areas. The results of excavation effects, investigations, stratigraphic mapping, and other geologic studies are also included. The report provides an evaluation of the geotechnical aspects of performance in the context of the relevant design criteria and also describes the techniques used to acquire the data and the performance history of the instruments. The depth and breadth of the evaluation for the different underground facilities varies according to the types and quantities of data that are available, and the complexity of the recorded geotechnical responses

  3. Papers of the Canadian Institute's 8. annual North American pipelines and storage conference : update on critical infrastructure developments and market dynamics shaping the North American grid

    International Nuclear Information System (INIS)

    2003-01-01

    Leaders and experts from the petroleum and natural gas industry outlined some of the recent changes that have taken place in the North America gas and electricity industry. The relationship between pipeline and storage capacity was discussed with reference to how the connection affects prices at North American storage hubs. The topics of discussion ranged from the challenges associated with declines in capacity and market dynamics, to how gas marketability will be affected by the slowdown in pipeline development in North America. The investment community offered advice on long-run value creation in natural gas. The current state of development of Arctic gas was highlighted along with a review of how growth in liquefied natural gas (LNG) is changing the role of gas infrastructure in North America. It was noted that although markets will work to balance supply and demand, there is a need for new sources of North American supply to meet growing long-term demand. The fall-off in U.S. domestic natural gas supplies combined with low storage levels has created a supply crisis. The conference featured 19 presentations, of which 4 have been indexed separately for inclusion in this database. refs., tabs., figs

  4. Geotechnical parameters and behaviour of uranium tailings

    International Nuclear Information System (INIS)

    Matyas, E.L.

    1984-01-01

    The results of laboratory and in situ testing and test blasting, the observations made on a test embankment, and a description of actual construction practice associated with engineering studies for the management of uranium mill tailings at Elliot Lake, Ontario are presented. Relative density values inferred from standard penetration tests and cone penetrometer tests are shown to be inconsistent with relative density values determined from maximum and minimum void ratios. Some of the data contradicts existing correlations. The compressibility of in situ saturated tailings is presented in graphical form in terms of void ratio, vertical effective stress, and mean grain size. Hydraulic conductivity is shown to range over many orders of magnitude, depending on the void ratio. The observations on an instrumental test embankment are used to explain the appropriate selection of geotechnical parameters that gave good agreement between back-calculated and observed settlements. One-dimensional consolidation theory was found to be valid for the embankment case. It is necessary to account for changes in soil properties that occur during the consolidation process in order to obtain a good fit between back-calculated and observed settlements. The successful use of tailings sand for embankment construction is described. On the basis of normalized standard penetration resistance values, it is concluded that localized zones of saturated tailings may be prone to liquefaction under predicted earthquake loadings

  5. Geotechnical investigations of the PEP site

    International Nuclear Information System (INIS)

    Gould, R.S.

    1976-02-01

    The purpose of this paper is to summarize the general nature of the geology and rock and soil formations of the PEP site as they relate to the design and construction of the project; to describe site investigation programs and to catalog the geotechnical information presently available about the site. The recently-completed investigation of subterranean conditions around the PEP ring when coupled with previous surveys gives us a good understanding of what to expect with regard to tunneling, undertaking larger underground excavations and constructing research halls are the interaction areas. It bears out the predictions made in Jacobs and Associates' report of 1973; i.e., that the ring housing construction is classified as soft-ground tunneling and that large underground openings, such as region 10 and the injection junction structures, will require great attention to support. A shield or shields will probably be required. On the positive side, the site affords very good conditions for soft-ground tunneling. Water will be a problem in some areas, but not an unsolvable one. The possibility of encountering lethal or explosive gases, almost always the case in tunneling in California's coastal formations, exists but has not been ascertained. Finally, no reasons to change current cost estimates or schedules have merged from the investigation. 13 refs., 1 fig

  6. Geotechnical characteristics of some Iraqi gypseous soils

    Directory of Open Access Journals (Sweden)

    Schanz Tom

    2018-01-01

    Full Text Available In Iraq, especially in the last three decades, extensive developments have been evidenced in the regions of gypseous soils due to the need of construction of many numbers of strategic projects. Failure of different structures constructed on gypseous soil in various regions in Iraq have been noticed. For this purpose, three areas in northern Iraq were selected (Samarra, Tikrit and Baiji to study their geotechnical characteristics due to their high gypsum contents as well as many engineering problems are faced due to dissolution of gypsum. The experimental work involves testing of many properties such as: scanning electron microscopy (SEM, XRD, chemical, physical, compressibility, collapsibility, shear strength and suction. At low stress level, the test results revealed that, higher collapse potential (CP is recorded for Tikrit soil. While at low stress level, higher CP is obtained for Baiji soil indicating the increase in CP with decreasing gypsum content. Furthermore, the CP significantly increases with increasing stress level and soaking period at a particular stress level. According to severity classification of the collapse potential, Baiji soil is considered as moderate trouble to slight, while Tikrit soil is considered as trouble to moderate. After soaking, both soils become trouble. As well as, the results showed a reduction in Tikrit soil shear parameters ( φ and c after soaking period of 6 and 24 hrs as 12.2 to 9.2% in the internal friction angle and 91.5 to 94.2% in cohesion, respectively with respect to dry condition. Maximum total suction is measured for low consistency soils (liquid limit < 30% represented by Tikrit soil.

  7. Analysis of change orders in geotechnical engineering work at INDOT : [technical summary].

    Science.gov (United States)

    2011-01-01

    There was a perception at INDOT that the number of change orders connected with geotechnical work was excessive, and that, as a consequence, geotechnical projects were not completed on time or within budget. It was reported that INDOT construction pr...

  8. Geotechnical Parameters from Seismic Measurements: Two Field Examples from Egypt and Saudi Arabia

    KAUST Repository

    Khalil, Mohamed H.; Hanafy, Sherif M.

    2016-01-01

    © 2016 EEGS. Geotechnical parameters were used to determine subsurface rock quality for construction purposes. We summarize the mathematical relationships used to calculate the geotechnical parameters from P- and S-wave velocities and density values

  9. CNA/CNS conference summaries

    International Nuclear Information System (INIS)

    1992-01-01

    This volume contains summaries of papers presented at the 32. annual conference of the Canadian Nuclear Association and the 13. annual conference of the Canadian Nuclear Society. The full proceedings, and the individual papers contained therein, have been abstracted separately. Sessions on the following topics are included: Plenary; The international CANDU program; Canadian used fuel management program; Public information advocates; Fuel and electricity supply; In which direction should reactors advance?; Canadian advanced nuclear research program; International cooperation in operations; Safety in design, operation, regulation; Renovation of operating stations; Reactor physics; New concepts and Technology; Fuel behaviour; Reactor design; Safety analysis; Fuel channel behaviour; Equipment and design qualification; Compliance and licensing; Fusion science and technology; Darlington assessment; Plant aging and life assessment; Thermalhydraulic modelling and analysis; Diagnostics and data management; Operator training and certification

  10. Recent advancements in the geotechnical characterization of oil sands tailings

    Energy Technology Data Exchange (ETDEWEB)

    Sharp, J. [Conetec, Richmond, BC (Canada)

    2010-07-01

    The technical aspects of soft oil sands tailings in-situ geotechnical site investigations were discussed. Geotechnical studies are conducted to determine containment structure stability as well as to determine volumetric and mass balances. The results of the studies are used in tailings management plans and construction activities. Flow penetrometers, field vane shear tests, and Gamma-CPTu tests are used in in-situ oil sands tailings geotechnical studies in order to determine pore pressure dissipation, and measure shear strength. Ball penetration tests are conducted to determine tailings strength. Methods of interpreting data from the tests were presented, and data from the tests were also compared and evaluated. Recommended procedures for strength screening were presented. Statistical methods for determining tailings behaviour types were outlined. The study showed that Gamma-CPTu data can be used to obtain reasonable preliminary estimates of solids and fines when combined with tailings behaviour type analyses. tabs., figs.

  11. Geotechnical field data and analysis report, July 1991--June 1992

    International Nuclear Information System (INIS)

    1992-01-01

    The Geotechnical Field Data and Analysis Report presents the data for the assessments of the geotechnical status of the Waste Isolation Pilot Plant (WIPP). During the period of shaft sinking and construction of the principal underground access and experimental areas, reporting was on a quarterly basis. Since 1987, reporting has been carried out annually because excavation of the waste storage panels will take place more slowly and over an extended period. This report presents the data collected up to June 30, 1992. This report focuses on the presentation of geotechnical data from the various underground facilities including the shafts, shaft stations, access drifts, test rooms, and waste storage areas. It also describes the techniques used to acquire the data and the performance history of the instruments

  12. Geotechnical Field Data and Analysis Report, July 1987--June 1988

    International Nuclear Information System (INIS)

    1989-08-01

    The Geotechnical Field Data and Analysis Report (GFDAR) is prepared to provide a timely assessment of the geotechnical status of the Waste Isolation Pilot Plant (WIPP). During the period of shaft sinking and construction of the principal underground access and experimental areas, reporting was on a quarterly basis. Because geotechnical responses of existing underground facilities have slowed to nearly steady-state and excavation of the waste storage panels will take place more slowly and over an extended period, reporting in the coming years will be on an annual cycle. Data collected before June 30 of the year of the report will be presented and analyzed. This report presents and analyzes all data collected between July 31, 1987, and June 30, 1988. 35 refs., 47 figs

  13. Executive committee report: geotechnical instrumentation working group meeting

    International Nuclear Information System (INIS)

    Wilder, D.G.; Rogue, F.; Beloff, W.R.; Binnall, E.; Gregory, E.C.

    1982-01-01

    Responding to the widespread need for the geotechnical community to discuss instrumentation for nuclear waste repositories, a meeting was held December 2 and 3, 1981, in Denver, Colorado. This report gives the group's consensus recommendations to aid in making decisions for development of instrumentation for future repository work. The main conclusions of the working group meeting were as follows: (1) monitoring of geotechnical parameters in nuclear waste repositories will be necessary to meet licensing requirements; (2) currently available instruments are underdeveloped for this monitoring; (3) research and development to provide adequate instrumentation will need to be performed under federal sponsorship by national laboratories, universities, contractors, and consultants; and (4) a NASA-type reliability program is needed to meet the quality assurance, durability, calibration, and time schedule demands of geotechnical instrumentation development. This will require significant financial commitments from the federal sector

  14. Seismic impact of the railway on the geotechnical constructions

    Science.gov (United States)

    Stolárik, Martin; Pinka, Miroslav

    2017-09-01

    Nowadays, the focus on more ecological means of material and persons transport is still higher. Big loads can be transported on railways more effectively and with lower environment impact than on roads. The geotechnical structures are inherent parts of railway infrastructure, such as embankments, sides of notches and, of course, tunnels, foundation constructions of buildings or pillars of bridges and the others geotechnical constructions (e.g. retaining walls, culverts, transition area of bridges). By train pass, vibrations are caused and these vibrations are relayed to the soil. These vibrations can make adverse impact to surrounding objects and to technologies placed in. This so far uncared-for influence gets into the foreground by current trend of everyday life technical equipment increasing. The article introduces different kinds of geotechnical structures and the influence of by-passing railway transport on their constructions and surroundings. The data are evaluated in the amplitude and frequency domain.

  15. Geotechnical field data and analysis report, July 1990--June 1991

    International Nuclear Information System (INIS)

    1992-03-01

    The Geotechnical Field Data and Analysis Report presents the data for the assessment of the geotechnical status of the Waste Isolation Pilot Plant (WIPP). During the period of shaft sinking and construction of the principal underground access and experimental areas, reporting was on a quarterly basis. Since 1987, reporting has been carried out annually because excavation of the waste storage panels is taking place more slowly and over an extended period. This report presents the data collected up to June 30, 1991. This report focuses on the presentation of geotechnical data from the various underground facilities including the shafts stations, access drifts, test rooms, and waste storage areas. It also describes the techniques used to acquire the data and the performance history of the instruments

  16. Geotechnical Field Data and Analysis Report, July 1989--June 1990

    International Nuclear Information System (INIS)

    1991-03-01

    The Geotechnical Field Data and Analysis Report presents the data for the assessment of the geotechnical status of the Waste Isolation Pilot Plant (WIPP). During the period of shaft sinking and construction of the principal underground access and experimental areas, reporting was on a quarterly basis. Since 1987, reporting has been carried out annually because excavation of the waste storage panels will take place more slowly and over an extended period. This report presents the data collected up to June 30, 1990. The report focuses on the presentation of geotechnical data from the various underground facilities including the shafts, shaft stations, access drifts, test rooms, and waste storage areas. It also describes the techniques used to acquire the data and the performance history of the instruments. 371 figs., 9 tabs

  17. Holistic simulation of geotechnical installation processes numerical and physical modelling

    CERN Document Server

    2015-01-01

    The book provides suitable methods for the simulations of boundary value problems of geotechnical installation processes with reliable prediction for the deformation behavior of structures in static or dynamic interaction with the soil. It summarizes the basic research of a research group from scientists dealing with constitutive relations of soils and their implementations as well as contact element formulations in FE-codes. Numerical and physical experiments are presented providing benchmarks for future developments in this field. Boundary value problems have been formulated and solved with the developed tools in order to show the effectivity of the methods. Parametric studies of geotechnical installation processes in order to identify the governing parameters for the optimization of the process are given in such a way that the findings can be recommended to practice for further use. For many design engineers in practice the assessment of the serviceability of nearby structures due to geotechnical installat...

  18. Ultimate storage of radioactive waste - geotechnical challenge or routine task?

    International Nuclear Information System (INIS)

    Alheid, H.J.

    2005-01-01

    Construction, operation and decommissioning of nuclear waste repositories require sophisticated design, high-tech technical implementation and reliable performance assessment studies. Geotechnical methods have been applied in many research projects and tailored to the high standards of nuclear waste disposal. Exemplary the development of methods for the characterization of excavation damaged zones (EDZ) is discussed in this paper. Well known geotechnical and geophysical methods have been adapted to fulfil the requirements of essential high resolution in space and the necessity of long term observations. The achieved improvements in measurement techniques and data processing allow to describe the properties of the EDZ in detail. Scientist have accepted the challenge and fulfilled the special requirements of measuring, monitoring and modelling in the field of nuclear waste disposal. The newly developed methods should be checked for their applicability to other geotechnical problems in order to achieve more detailed results than with standard methods. (orig.)

  19. Celebrating 25 years of Syncrude`s Geotechnical Review Board

    Energy Technology Data Exchange (ETDEWEB)

    McKenna, G.

    1998-09-01

    An historical review of Syncrude`s Geotechnical Review Board (GRB) was presented, relating some of the successes of the Board over the past 25 years since its establishment. A list of the type of challenges faced by Syncrude where the GRB`s guidance and counselling proved to be critical, is also included. The GRB was established in the 1970s to help Syncrude manage its geotechnical-based risks and to enhance its long-range chances to be successful in oil sands mining. Mining oil sands was breaking new ground back then, consequently, the geotechnical risks were largely unknown and the potential of heavy financial losses were great. Under such circumstances making the right decisions in dealing with geotechnical risks was vital to success. The fact that 25 years later Syncrude is still operating on the basis of those earlier decisions and still relies heavily on the expertise of the Board for recommendations and guidance is a testimony to the value of the GRB to Syncrude`s operations. The GRB`s success is credited to the Board`s world-wide expertise, objectivity, focus on the big issues, risk-based approach and its excellent working partnership with Syncrude employees. Dragline mining and tailings management are the areas that benefited the most from the Board`s involvement, but the Board has been involved in every facet of geotechnical-based risk management. Some of the geotechnical challenges that the GRB has helped Syncrude to overcome include dam construction of muskeg foundation, heavy foundations on gassy and temperature-sensitive soils, coring and testing of gassy/expansive oil sands and haul roads, highwall design utilizing locked sands, winter construction of large fluid retaining embankments and characterization and management of fluid fine tailings. 3 refs., 1 graph, 3 figs.

  20. Geotechnical Analysis Report for July 2004 - June 2005, Volume 2, Supporting Data

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions LLC

    2006-03-20

    This report is a compilation of geotechnical data presented as plots for each active instrument installed in the underground at the Waste Isolation Pilot Plant (WIPP) through June 30, 2005. A summary of the geotechnical analyses that were performed using the enclosed data is provided in Volume 1 of the Geotechnical Analysis Report (GAR).

  1. Waste Isolation Pilot Plant Geotechnical Analysis Report for July 2005 - June 2006, Volume 2, Supporting Data

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions LLC

    2007-03-25

    This report is a compilation of geotechnical data presented as plots for each active instrument installed in the underground at the Waste Isolation Pilot Plant (WIPP) through June 30, 2006. A summary of the geotechnical analyses that were performed using the enclosed data is provided in Volume 1 of the Geotechnical Analysis Report (GAR).

  2. Waste Isolation Pilot Plant Geotechnical Analysis Report for July 2005 - June 2006, Volume 2, Supporting Data

    International Nuclear Information System (INIS)

    2007-01-01

    This report is a compilation of geotechnical data presented as plots for each active instrument installed in the underground at the Waste Isolation Pilot Plant (WIPP) through June 30, 2006. A summary of the geotechnical analyses that were performed using the enclosed data is provided in Volume 1 of the Geotechnical Analysis Report (GAR).

  3. Geotechnical Analysis Report for July 2004 - June 2005, Volume 2, Supporting Data

    International Nuclear Information System (INIS)

    2006-01-01

    This report is a compilation of geotechnical data presented as plots for each active instrument installed in the underground at the Waste Isolation Pilot Plant (WIPP) through June 30, 2005. A summary of the geotechnical analyses that were performed using the enclosed data is provided in Volume 1 of the Geotechnical Analysis Report (GAR).

  4. Geology and geotechnic in the implantation of nuclear power plants

    International Nuclear Information System (INIS)

    Alves, P.R.R.

    1984-01-01

    It is presented a general methodology for geological and geotechnical investigations to be performed in sites selected for the construction of nucldar power plants. Items dealing with the standards applied to licensing of a nuclear power plants, the selection process of sites and identification of geological and geotechnical parameters needed for the regional and local characterization of the area being studied, were incorporated. It is also provided an aid to the writing of technical reports, which are part of the documentation an owner of a nuclear power plant needs to submit to the Comissao Nacional de Energia Nuclear, to fulfill the nuclear installation licensing requirements. (Author) [pt

  5. Geotechnical Tests on Asteroid Simulant Orgueil

    Science.gov (United States)

    Garcia, Alexander D'marco

    2017-01-01

    In the last 100 years, the global population has more than quadrupled to over seven billion people. At the same time, the demand for food and standard of living has been increasing which has amplified the global water use by nearly eight times from approximately 500 to 4000 cu km per yr from 1900 to 2010. With the increasing concern to sustain the growing population on Earth it is necessary to seek other approaches to ensure that our planet will have resources for generations to come. In recent years, the advancement of space travel and technology has allowed the idea of mining asteroids with resources closer to becoming a reality. During the duration of the internship at NASA Kennedy Space Center, several geotechnical tests were conducted on BP-1 lunar simulant and asteroid simulant Orgueil. The tests that were conducted on BP-1 was to practice utilizing the equipment that will be used on the asteroid simulant and the data from those tests will be omitted from report. Understanding the soil mechanics of asteroid simulant Orgueil will help provide basis for future technological advances and prepare scientists for the conditions they may encounter when mining asteroids becomes reality in the distant future. Distinct tests were conducted to determine grain size distribution, unconsolidated density, and maximum density. Once the basic properties are known, the asteroid simulant will be altered to different levels of compaction using a vibrator table to see how compaction affects the density. After different intervals of vibration compaction, a miniature vane shear test will be conducted. Laboratory vane shear testing is a reliable tool to investigate strength anisotropy in the vertical and horizontal directions of a very soft to stiff saturated fine-grained clayey soil. This test will provide us with a rapid determination of the shear strength on the undisturbed compacted regolith. The results of these tests will shed light on how much torque is necessary to drill

  6. Impact of environmental factors on the distribution of extreme scouring (gouging) event, Canadian Beaufort shelf

    Energy Technology Data Exchange (ETDEWEB)

    Blasco, Steve [Geological Survey of Canada, Dartmouth (Canada); Carr, Erin; Campbell, Patrick [Canadian Seabed Research Ltd., Porters Lake (Canada); Shearer, Jim [Shearer Consulting, Ottawa (Canada)

    2011-07-01

    A knowledge of the presence of scours, their dimensions and their return frequencies is highly important in the development of hydrocarbon offshore structures. Mapping surveys have identified 290 extreme scour events across the Canadian Beaufort shelf. This paper investigated the impact of environmental factors on the distribution of extreme scouring events in the Canadian Beaufort shelf. This study used the NEWBASE database of new ice scours to perform an analysis of the scours appearance mechanisms. The geotechnical zonation, the bathymetry and the shelf gradient were evaluated using these data. Estimation of the surficial sediment type, the surficial sediment thickness and sea ice regime were also made. It was found that the spatial distribution of extreme scour events is controlled by sea-ice regime, bathymetry and geotechnical zonation. The results obtained from mapping surveys suggested that the key controlling environmental factors may combine to limit the depth of extreme scour events to 5 meters.

  7. Incorporating Learning Outcomes into an Introductory Geotechnical Engineering Course

    Science.gov (United States)

    Fiegel, Gregg L.

    2013-01-01

    The article describes the process of incorporating a set of learning outcomes into a geotechnical engineering course. The outcomes were developed using Bloom's taxonomy and define the knowledge, skills, and abilities the students are expected to achieve upon completion of the course. Each outcome begins with an action-oriented verb corresponding…

  8. Bayesian statistical analysis of censored data in geotechnical engineering

    DEFF Research Database (Denmark)

    Ditlevsen, Ove Dalager; Tarp-Johansen, Niels Jacob; Denver, Hans

    2000-01-01

    The geotechnical engineer is often faced with the problem ofhow to assess the statistical properties of a soil parameter on the basis ofa sample measured in-situ or in the laboratory with the defect that somevalues have been replaced by interval bounds because the corresponding soilparameter values...

  9. Geotechnical Properties of Makurdi Shale and Effects on Foundations

    African Journals Online (AJOL)

    Geotechnical Properties of Makurdi Shale and Effects on Foundations. IO Agbede, P Smart ... Ten disturbed soil samples were collected from a third site of a proposed site for a light building and subjected to engineering classification tests. Based on the outcome of the second set of experiments, a foundation other than the ...

  10. Geotechnical Analysis Report for July 2003 - June 2004

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions LLC

    2005-03-20

    This report contains an assessment of the geotechnical status of the Waste Isolation Pilot Plant (WIPP). During the excavation of the principal underground access and experimental areas, the status was reported quarterly. Since 1987, when the initial construction phase was completed, reports have been published annually. This report presents and analyzes data collected from July 1, 2003, to June 30, 2004.

  11. Comparative Evaluation of Geotechnical Properties of Red Tropical ...

    African Journals Online (AJOL)

    ADOWIE PERE

    2017-12-09

    Dec 9, 2017 ... Keywords: Red tropical soils, Geotechnical, termite hills, subgrade, suitability, construction. A considerable .... air-free distilled water was added so that the soil in the bottle is just ..... Iron Isotope composition of. Iron oxide as a ...

  12. The future of the finite element method in geotechnics

    NARCIS (Netherlands)

    Brinkgreve, R.B.J.

    2012-01-01

    In this presentation a vision is given on tlie fiiture of the finite element method (FEM) for geotechnical engineering and design. In the past 20 years the FEM has proven to be a powerful method for estimating deformation, stability and groundwater flow in geoteclmical stmctures. Much has been

  13. Overview of geotechnical methods to characterize rock masses

    International Nuclear Information System (INIS)

    Heuze, F.E.

    1981-12-01

    The methods that are used to characterize discontinuous rock masses from a geotechnical point of view are summarized. Emphasis is put on providing key references on each subject. The topics of exploration, in-situ stresses, mechanical properties, thermal properties, and hydraulic properties are addressed

  14. Project-Based Learning in Geotechnics: Cooperative versus Collaborative Teamwork

    Science.gov (United States)

    Pinho-Lopes, Margarida; Macedo, Joaquim

    2016-01-01

    Since 2007/2008 project-based learning models have been used to deliver two fundamental courses on Geotechnics in University of Aveiro, Portugal. These models have evolved and have encompassed either cooperative or collaborative teamwork. Using data collected in five editions of each course (Soil Mechanics I and Soil Mechanics II), the different…

  15. Geotechnical Analysis Report for July 2003 - June 2004

    International Nuclear Information System (INIS)

    2005-01-01

    This report contains an assessment of the geotechnical status of the Waste Isolation Pilot Plant (WIPP). During the excavation of the principal underground access and experimental areas, the status was reported quarterly. Since 1987, when the initial construction phase was completed, reports have been published annually. This report presents and analyzes data collected from July 1, 2003, to June 30, 2004.

  16. Numerical simulation of non-linear phenomena in geotechnical engineering

    DEFF Research Database (Denmark)

    Sørensen, Emil Smed

    Geotechnical problems are often characterized by the non-linear behavior of soils and rock which are strongly linked to the inherent properties of the porous structure of the material as well as the presence and possible flow of any surrounding fluids. Dynamic problems involving such soil-fluid i...

  17. New Principles of Process Control in Geotechnics by Acoustic Methods

    OpenAIRE

    Leššo, I.; Flegner, P.; Pandula, B.; Horovčák, P.

    2007-01-01

    The contribution describes the new solution of the control of rotary drilling process as some elementary process in geotechnics. The article presents the first results of research on the utilization of acoustic methods in identification process by optimal control of rotary drilling.

  18. New Principles of Process Control in Geotechnics by Acoustic Methods

    Directory of Open Access Journals (Sweden)

    Leššo, I.

    2007-01-01

    Full Text Available The contribution describes the new solution of the control of rotary drilling process as some elementary process in geotechnics. The article presents the first results of research on the utilization of acoustic methods in identification process by optimal control of rotary drilling.

  19. Conference Papers

    International Nuclear Information System (INIS)

    2003-01-01

    A total of 18 papers were presented at the 2003 Annual Executive Conference of the Canadian Gas Association held at St. Andrews, NB, from June 25th to June 28th. Titles of the presentations were as follows: (1) 'Positioning natural gas in a transforming world' by Pierre Marcel Desjardins; (2) 'Positioning natural gas in a transforming world' by Jean-Paul Theoret; (3) 'Perceptions of natural gas' by Noel Sampson; (4) 'Energy efficiency as an opportunity for the natural gas industry' by Peter Love; (5) 'Natural gas R and D - NRCan perspective' by Graham R. Campbell; (6) 'Impact of earned media on corporate perceptions in the gas industry' by Michael Coates; (7) 'Moving forward with an initiative for natural gas technology innovation' by Emmanuel Morin; (8) 'Natural gas R and D - No more dodging the issue' by Chuck Szmurlo; (9) 'Meeting the technology needs of the gas industry and the gas consumer' by Stanley S. Borys; (10) 'Market signals' by John Wellard; (11) 'Future sources of Canadian natural gas' by Rick Hyndman; (12) 'The state of supply: Northeast U.S. perspective' by Tom Kiley; (13) 'AGA's priorities and perspectives' by Dick Reiten; (14) 'Global energy issues: Recent development in policy and business' by Gerald Doucet; (15) 'Keeping the distribution cart behind the horse: Why finding more offshore gas is much more important than completing the natural gas grid, including for New Brunswick' by Brian Lee Crowley; (16) 'Environmental opportunities and challenges for the gas industry' by Manfred Klein; (17) 'The potential for natural gas demand destruction' by Timothy Partridge; and (18) 'Pushing the envelope on gas supply' by Roland R. George. In most instances only speaking notes and view graphs are available

  20. Second European Conference on Unsaturated Soils, E-UNSAT 2012

    CERN Document Server

    Jommi, Cristina; D’Onza, Francesca; Unsaturated Soils: Research and Applications

    2012-01-01

    These volumes contain the contributions to the Second European Conference on Unsaturated Soils, E-UNSAT 2012, held in Napoli, Italy, in June 2012. The event is the second of a series of European conferences, and follows the first successful one, organised in Durham, UK, in 2008. The conference series is supported by Technical Committee 106 of the International Society of Soil Mechanics and Geotechnical Engineering on Unsaturated Soils. The published contributions were selected after a careful peer-review process. A collection of more than one hundred papers is included, addressing the three thematic areas experimental, including advances in testing techniques and soil behaviour, modelling, covering theoretical and constitutive issues together with numerical and physical modelling, and engineering, focusing on approaches, case histories and geo-environmental themes. The areas of application of the papers embrace most of the geotechnical problems related to unsaturated soils. Increasing interest in geo-environm...

  1. Geological and geotechnical investigations for nuclear power plants sites

    International Nuclear Information System (INIS)

    Alves, P.R.R.

    1984-09-01

    This dissertation presents a general methodology for the tasks of geological and geotechnical investigations, to be performed in the proposed sites for construction of nuclear Power Plants. In this work, items dealing with the standards applied to licensing of Nuclear Power Plants, with the selection process of sites and identification of geological and geotechnical parameters needed for the regional and local characterization of the area being studied, were incorporated. This dissertation also provides an aid to the writing of Technical Reports, which are part of the documentation an owner of a Nuclear Power Plant needs to submit to the Comissao Nacional de Energia Nuclear, to fulfill the nuclear installation licensing requirements. Moreover, this work can contribute to the planning of field and laboratory studies, needed to determine the parameters of the area under investigation, for the siting of Nuclear Power Plants. (Author) [pt

  2. Geotechnical problems in the consolidation of buildings of historical interest

    Directory of Open Access Journals (Sweden)

    Giovanni Calabresi

    2003-02-01

    Full Text Available The structural damages of ancient structures and monuments are very often due to differential settlements of their foundations, or to other effects of soil-structure interaction. A correct analysis of the damaging phenomena should be based on a sound geotechnical engineering approach, which requires expensive and long investigations on the mechanical characteristics of the foundation soils. However the last decade’s progress in construction technologies has offered a new and flexible kind of solutions to consolidate foundation structures that are often quicker and less expensive than a serious and complete geotechnical study. Therefore very often one of the above-mentioned solutions is simply adopted avoiding any previous study. The paper briefly illustrates the main negative effects of that approach, referring to some interesting case histories.

  3. Geological-geotechnical investigation for large horizontal directional drilling

    Energy Technology Data Exchange (ETDEWEB)

    Martins, Pedro R.R.; Rocha, Ronaldo; Avesani Neto, Jose Orlando; Placido, Rafael R.; Ignatius, Scandar G.; Galli, Vicente Luiz [Instituto de Pesquisas Tecnologicas do Estado de Sao Paulo (IPT), Sao Paulo, SP (Brazil); Amaral, Claudio S. [Centro de Pesquisa Leopoldo A. Miguez de Melo (CENPES/PETROBRAS), Rio de Janeiro, RJ (Brazil)

    2009-07-01

    Use of Horizontal Directional Drilling - HDD for large diameter (OD>20 inches) pipeline installation started in the second half of the seventies. Since then the method became the preferred alternative for situations in which it is necessary an underground pipeline but there are concerns about digging trenches. Crossings of roadways, water bodies and environmental sensitive areas are typical examples of its application. Technical and economic feasibility of HDD depends significantly on the properties of the materials that will be drilled. Lack of information about these materials can lead to several problems as: schedule delays, cost elevation, pipeline damage, unforeseen environmental impacts and even the failure of the entire operation. Ground investigation campaigns for HDD should define a consistent geological-geotechnical model, which must include determination of behaviour parameters for soil and rock masses that will be drilled. Thus it is proposed an investigation in tree stages: review of available geological-geotechnical information, site reconnaissance, and field survey. (author)

  4. On Some Methods in Safety Evaluation in Geotechnics

    Directory of Open Access Journals (Sweden)

    Puła Wojciech

    2015-06-01

    Full Text Available The paper demonstrates how the reliability methods can be utilised in order to evaluate safety in geotechnics. Special attention is paid to the so-called reliability based design that can play a useful and complementary role to Eurocode 7. In the first part, a brief review of first- and second-order reliability methods is given. Next, two examples of reliability-based design are demonstrated. The first one is focussed on bearing capacity calculation and is dedicated to comparison with EC7 requirements. The second one analyses a rigid pile subjected to lateral load and is oriented towards working stress design method. In the second part, applications of random field to safety evaluations in geotechnics are addressed. After a short review of the theory a Random Finite Element algorithm to reliability based design of shallow strip foundation is given. Finally, two illustrative examples for cohesive and cohesionless soils are demonstrated.

  5. On Some Methods in Safety Evaluation in Geotechnics

    Science.gov (United States)

    Puła, Wojciech; Zaskórski, Łukasz

    2015-06-01

    The paper demonstrates how the reliability methods can be utilised in order to evaluate safety in geotechnics. Special attention is paid to the so-called reliability based design that can play a useful and complementary role to Eurocode 7. In the first part, a brief review of first- and second-order reliability methods is given. Next, two examples of reliability-based design are demonstrated. The first one is focussed on bearing capacity calculation and is dedicated to comparison with EC7 requirements. The second one analyses a rigid pile subjected to lateral load and is oriented towards working stress design method. In the second part, applications of random field to safety evaluations in geotechnics are addressed. After a short review of the theory a Random Finite Element algorithm to reliability based design of shallow strip foundation is given. Finally, two illustrative examples for cohesive and cohesionless soils are demonstrated.

  6. Commercial Light Water Reactor Tritium Extraction Facility Geotechnical Summary Report

    International Nuclear Information System (INIS)

    Lewis, M.R.

    2000-01-01

    A geotechnical investigation program has been completed for the Circulating Light Water Reactor - Tritium Extraction Facility (CLWR-TEF) at the Savannah River Site (SRS). The program consisted of reviewing previous geotechnical and geologic data and reports, performing subsurface field exploration, field and laboratory testing and geologic and engineering analyses. The purpose of this investigation was to characterize the subsurface conditions for the CLWR-TEF in terms of subsurface stratigraphy and engineering properties for design and to perform selected engineering analyses. The objectives of the evaluation were to establish site-specific geologic conditions, obtain representative engineering properties of the subsurface and potential fill materials, evaluate the lateral and vertical extent of any soft zones encountered, and perform engineering analyses for slope stability, bearing capacity and settlement, and liquefaction potential. In addition, provide general recommendations for construction and earthwork

  7. Holistic simulation of geotechnical installation processes benchmarks and simulations

    CERN Document Server

    2016-01-01

    This book examines in detail the entire process involved in implementing geotechnical projects, from a well-defined initial stress and deformation state, to the completion of the installation process.   The individual chapters provide the fundamental knowledge needed to effectively improve soil-structure interaction models. Further, they present the results of theoretical fundamental research on suitable constitutive models, contact formulations, and efficient numerical implementations and algorithms. Applications of fundamental research on boundary value problems are also considered in order to improve the implementation of the theoretical models developed. Subsequent chapters highlight parametric studies of the respective geotechnical installation process, as well as elementary and large-scale model tests under well-defined conditions, in order to identify the most essential parameters for optimizing the process. The book provides suitable methods for simulating boundary value problems in connection with g...

  8. Organic matter and the geotechnical properties of submarine sediments

    Science.gov (United States)

    Keller, George H.

    1982-09-01

    Continental slope deposits off Peru and Oregon where coastal upwelling is a pronounced oceanographic process possess significant concentrations of organic carbon. Geotechnical properties are altered to varying degrees by the organic matter. Organic matter absorbs water and causes clay-size particles to aggregate forming an open fabric. This causes unusually high water contents and plasticity and exceptionally low wet bulk densities. Some of these deposits show notable increases in shear strength, sensitivity and degree of apparent overconsolidation. Owing to the unique geotechnical properties, sediment stability characteristics are considered to be poor in situations of excess pore pressures. Failure appears to take the form of a fluidized flow somewhat similar to the quick clays of Scandinavia.

  9. Geotechnical field data and analysis report, July 1988--June 1989

    International Nuclear Information System (INIS)

    1990-09-01

    The Geotechnical Field Data and Analysis Report (GFDAR) is prepared to provide an assessment of the geotechnical status of the Waste Isolation Pilot Plant (WIPP). During the period of shaft sinking and construction of the principal underground access and experimental areas, reporting was on a quarterly basis. Since 1987, reporting has been carried out annually because excavation of the waste storage panels will take place more slowly and over an extended period. This report presents and analyzes data collected up to June 30, 1989. Volume II constitutes the principal documentation and presentation of data. It also describes the techniques used to acquire the data and the performance history of the instruments. This volume has as its anticipated audience those Project personnel who need to perform data analyses beyond those provided in Volume I, and external personnel who may choose to perform other analyses and evaluations for their own purposes. 6 refs., 351 figs., 9 tabs

  10. Geotechnical Field Data and Analysis Report, July 1987--June 1988

    International Nuclear Information System (INIS)

    1989-08-01

    The Geotechnical Field Data and Analysis Report (GFDAR) is prepared to provide a timely assessment of the geotechnical status of the Waste Isolation Pilot Plant (WIPP). During the period of shaft sinking and construction of the principal underground access and experimental areas, reporting was on a quarterly basis. Because excavation of the waste storage panels will take place more slowly and over an extended period, reporting in the coming years will be on an annual cycle. Data collected before June 30 of the year of the report will be presented and analyzed. This report presents and analyzes all data collected between July 31, 1987, and June 30, 1988. 3 refs., 410 figs., 30 tabs

  11. Conclusions regarding geotechnical acceptability of the WIPP site

    International Nuclear Information System (INIS)

    Weart, W.D.

    1983-01-01

    The Waste Isolation Pilot Plant (WIPP) was authorized by Congress in 1980 as an unlicensed research and development (R and D) facility to demonstrate the safe disposal of radioactive wastes arising from the defense activities and programs of the United States. WIPP is now being constructed in southeast New Mexico, using salt beds about 655 m below the surface of the ground. Construction of the full WIPP facility will not commence until a preliminary underground excavation phase, called Site and Preliminary Design Validation (SPDV), is satisfactorily concluded in the summer of 1983. This SPDV program permits confirmation of subsurface geology, in drifts at planned facility depth that extend for 1555 m in a north-south direction, and in the two vertical shafts that provide access to these drifts. The subsurface studies are nearing completion, and it is therefore appropriate to draw conclusions regarding the geotechnical acceptability of the WIPP site. Four geotechnical elements are discussed: dissolution, deformation, hydrologic regime, and natural resources

  12. Geotechnical parameters for three deep ocean study areas

    International Nuclear Information System (INIS)

    Nicholson, D.P.

    1989-01-01

    This chapter summarizes the results of geotechnical measurements made on cores taken at the three deep ocean sites that have been studied in detail as part of the international programme assessing the feasibility of deep ocean disposal of heat-generating radioactive waste. The capabilities of existing sampling methods and the adequacy of the available data for providing the geotechnical parameters needed to evaluate the technical feasibility of deep ocean disposal are discussed. It is concluded that, while it has not been possible to obtain core samples of sufficient quality and depth to provide all the parameters needed for the assessment, no fundamental differences between the sediments at the study areas and those found on land or in shallow water have been identified. (author)

  13. Analysis of Change Orders in Geotechnical Engineering Work at INDOT

    OpenAIRE

    Duvvuru Mohan, Varenya Kumar; Prezzi, Monica; McCullouch, Bob

    2011-01-01

    Change orders represent a cost to the State and to tax payers that often extremely large because contractors tend to charge very large amounts to any additional work that deviates from the work that was originally planned. Therefore, efforts must be made to reduce the occurrence of change orders in order to provide significant cost savings to the state of Indiana and save taxpayer dollars. The proposed research, in this context, developed a set of guidelines to allow the geotechnical office o...

  14. Geotechnical aspects of rock borrow for large breakwaters

    International Nuclear Information System (INIS)

    Watson, I.; Fischer, J.A.; Urlich, C.M.

    1975-01-01

    The state of the art is described of investigations to secure rock borrow for the breakwaters proposed to protect offshore nuclear power plants. Considerations relating to the geological, geotechnical, and design suitability of rock are discussed within the framework of economics, and the environmental impact of quarrying and transporting rock to potential sites on the East and Gulf coasts of the U.S. is examined. The methodology outlined has application to the construction of all large rockfill breakwaters

  15. Physical Modelling of Geotechnical Structures in Ports and Offshore

    Directory of Open Access Journals (Sweden)

    Bałachowski Lech

    2017-04-01

    Full Text Available The physical modelling of subsoil behaviour and soil-structure interaction is essential for the proper design of offshore structures and port infrastructure. A brief introduction to such modelling of geoengineering problems is presented and some methods and experimental devices are described. The relationships between modelling scales are given. Some examples of penetration testing results in centrifuge and calibration chamber are presented. Prospects for physical modelling in geotechnics are also described.

  16. Environmental geotechnics in the US region: a brief overview

    OpenAIRE

    Hoyos, LR; DeJong, JT; McCartney, JS; Puppala, AJ; Reddy, KR; Zekkos, D

    2015-01-01

    The present contribution to the Regional Editors themed issue offers a concise yet focused overview of some of the key technical and scientific issues, as well as of current trends and future challenges, related to the broad discipline of environmental geotechnics in the US region. Particular attention is devoted to current policy and societal drivers as well as future professional and research capacity requirements in critical areas such as innovative recycling and improvement of compost, co...

  17. UCIMS: Advances in geotechnical construction and performance monitoring

    Directory of Open Access Journals (Sweden)

    Raphael Siebenmann

    2015-04-01

    Full Text Available The Crossrail project currently under construction in Central London has been described as “The Big Dig on Steroids”, obviously referencing the Central Artery/Tunnel project in Boston completed in 2007. To address the multiple demands for timely construction performance monitoring, Crossrail envisioned the underground construction information management system (UCIMS to monitor construction progress and structural health along the entire route, with a network of geotechnical instruments (i.e. slope inclinometers, extensometers, piezometers, etc. and tunnel boring machine (TBM position information. The UCIMS is a geospatially referenced relational database that was developed using an open source geographic information system (GIS that allowed all stakeholders near immediate feedback of construction performance. The purpose of this article is to provide a brief history of geotechnical and structural monitoring software, to describe the structure and operation of the UCIMS, and to demonstrate how the functionality afforded by this system provided the requisite feedback to the stakeholders. Examples will be given regarding how the data management and visualization concepts incorporated into the UCIMS advanced the geotechnical construction industry.

  18. Geotechnical analysis report for July 1994--June 1995

    International Nuclear Information System (INIS)

    1996-09-01

    The geotechnical data from the underground excavations at the WIPP are interpreted and presented in this Geotechnical Analysis Report. The data are used to characterize conditions, assess design assumptions, and understand and predict the performance of the underground excavations during operations. The data are obtained as part of a regular monitoring program. They do not include data from tests performed by Sandia National Laboratories, the Scientific Advisor to the project in support of performance assessment studies. Geotechnical Analysis Reports have been prepared routinely and made available to the public since 1983. During the Site and Preliminary Design Validation Program, the Architect/Engineer for the project produced the reports on a quarterly basis to document the geomechanical performance during and immediately after construction of the underground. Upon completion of the constriction phase of the project in 1987, the reports have been prepared annually by the Management and Operating Contractor for the facility. This report describes the performance and conditions of selected areas from July 1, 1994, to June 30, 1995

  19. Geotechnical Field Data and Analysis Report, July 1991--June 1992

    International Nuclear Information System (INIS)

    1993-01-01

    The Geotechnical Field Data and Analysis Report documents the geotechnical data from the underground excavations at the Waste Isolation Pilot Plant (WIPP) located near Carlsbad, New Mexico. The data are used to characterize conditions, confirm design assumptions, and understand and predict the performance of the underground excavations during operations. The data are obtained as part of a routine monitoring program and do not include data from tests performed by Sandia National Laboratories (SNL), the Scientific Advisor to the project, in support of performance assessment studies. The purpose of the geomechanical monitoring program is to provide in situ data to support continuing assessments of the design for the underground facilities. Specifically, the program provides: Early detection of conditions that could compromise operational safety; evaluation of room closure to ensure retrievability of waste; guidance for design modifications and remedial actions; and data for interpreting the actual behavior of underground openings, in comparison with established design criteria. This Geotechnical Field Data and Analysis Report covers the period July 1, 1991 to June 30, 1992. Volume 1 provides an interpretation of the field data while Volume 2 describes and presents the data itself

  20. The "Canadian" in Canadian Children's Literature.

    Science.gov (United States)

    Bainbridge, Joyce; Wolodko, Brenda

    2001-01-01

    Notes that a rich body of Canadian children's literature exists that reflects the country's literary and socio-cultural values, beliefs, themes and images, including those of geography, history, language and identity. Discusses how Canadians tend to identify themselves first by region or province and then by nation. (SG)

  1. Research Activities of Geotechnical Research Group of NIIS from the Past to Present

    Science.gov (United States)

    Horii, N.; Toyosawa, Y.; Tamate, S.; Itoh, K.

    In this paper, firstly the memories of Prof. Tatsuoka's laboratory and research works carried out when the first author visited Prof. Tatsuoka's laboratory as a visiting researcher from May 1986 for about 1 year are described. Secondly, the research activities of Geotechnical Research Group of NIIS are introduced. Main emphasis is given on the research activities conducted using old geotechnical centrifuge (NIIS Mark-I centrifuge) and newly developed geotechnical centrifuge (NIIS Mark-II centrifuge).

  2. American National Standard: guidelines for evaluating site-related geotechnical parameters at nuclear power sites

    International Nuclear Information System (INIS)

    Anon.

    1978-01-01

    This standard presents guidelines for evaluating site-related geotechnical parameters for nuclear power sites. Aspects considered include geology, ground water, foundation engineering, and earthwork engineering. These guidelines identify the basic geotechnical parameters to be considered in site evaluation, and in the design, construction, and performance of foundations and earthwork aspects for nuclear power plants. Also included are tabulations of typical field and laboratory investigative methods useful in identifying geotechnical parameters. Those areas where interrelationships with other standards may exist are indicated

  3. Protest: The Canadian pulse

    International Nuclear Information System (INIS)

    Lott, J.E.

    1979-01-01

    This popularly written article compares Canadian attitudes to protests against nuclear power to those in the United States. Canadian protesters are more peaceful, expressing their opinions within the law. The article describes the main anti-nuclear groups in Canada and presents the results of public opinion surveys of Canadians on the use of nuclear power for generating electricity. (TI)

  4. The objectives and activities of the Canadian Radiation Protection Association

    International Nuclear Information System (INIS)

    Haynes, M.J.

    1998-01-01

    The Canadian Nuclear Society and the Canadian Radiation Protection Association are working to develop an agreement between the organizations to facilitate working together on issues of common interest. This paper will present the objectives, the organizational structure and major areas of activity of the Canadian Radiation Protection Association. It is a reciprocal presentation of one given earlier this year by Mr. Fred Boyd of the CNS to the CRPA annual conference. The intent is to help the membership of each organization better understand the objectives and interests of the other. (author)

  5. A select bibliography with abstracts of reports related to Waste Isolation Pilot Plant geotechnical studies (1972--1990)

    Energy Technology Data Exchange (ETDEWEB)

    Powers, D.W. [Powers (Dennis W.), Anthony, TX (United States); Martin, M.L. [International Technology, Inc., Las Vegas, NV (United States)

    1993-08-01

    This select bibliography contains 941 entries. Each bibliographic entry contains the citation of a report, conference paper, or journal article containing geotechnical information about the Waste Isolation Pilot Plant (WIPP). The entries cover the period from 1972, when investigation began for a WIPP Site in southeastern New Mexico, through December 1990. Each entry is followed by an abstract. If an abstract or suitable summary existed, it has been included; 316 abstracts were written for other documents. For some entries, an annotation has been provided to clarify the abstract, comment on the setting and significance of the document, or guide the reader to related reports. An index of key words/phrases is included for all entries.

  6. A select bibliography with abstracts of reports related to Waste Isolation Pilot Plant geotechnical studies (1972--1990)

    International Nuclear Information System (INIS)

    Powers, D.W.; Martin, M.L.

    1993-08-01

    This select bibliography contains 941 entries. Each bibliographic entry contains the citation of a report, conference paper, or journal article containing geotechnical information about the Waste Isolation Pilot Plant (WIPP). The entries cover the period from 1972, when investigation began for a WIPP Site in southeastern New Mexico, through December 1990. Each entry is followed by an abstract. If an abstract or suitable summary existed, it has been included; 316 abstracts were written for other documents. For some entries, an annotation has been provided to clarify the abstract, comment on the setting and significance of the document, or guide the reader to related reports. An index of key words/phrases is included for all entries

  7. Geotechnical aspects of subseabed disposal of high level radioactive wastes

    International Nuclear Information System (INIS)

    Silva, A.J.; Calnan, D.I.

    1981-01-01

    Additional data on geotechnical properties of MPG-1 sediments are presented. New data on Distal Abyssal Plain sediments east of the North Bermuda Rise (MPG-3N) indicates that this region has characteristics which compare favorably with MPG-1. The new permeability results are consistent with previous reported results for MPG-1 with a coefficient of permeability of approximately 10 -7 cm/sec. Preliminary results from MPG-3N indicate permeabilities comparable with those of MPG-1. Results are presented for thirty-seven triaxial compression tests on both undisturbed and remolded illite and smectite clays from the North Central Pacific (MPG-1). A preliminary set of repeated loading triaxial compression tests were performed on illite and smectite remolded clays from MPD-1. A device for anisotropic consolidation and triaxial compression has been developed which will allow the study of stress-strain behavior after anisotropic consolidation with zero lateral deformation. The long-term stress-strain behavior of deep sea sediments is the focus of a two-part testing program: Phase 1; room temperature studies, will be completed in Spring, 1980 and Phase 2; temperature effect studies, is now in the equipment development stage and should be underway by June, 1980. The testing portion of the laboratory Hole Closure study has been completed and most of the results are reported. A final technical report will be completed in June, 1980. The involvement of URI/MGL in this project covers five areas: site characterization, geotechnical analysis for platform foundation configuration, laboratory analysis of sediment-structure interaction development of in-situ vane shear apparatus and post-test analysis of recovered data relating to geotechnical behavior

  8. Department of Mining and Geotechnics – 50 th Anniversary

    Directory of Open Access Journals (Sweden)

    Ïurove Juraj

    2002-12-01

    Full Text Available The Mining faculty of the Technical High School in Košice (now BERG Faculty of the Technical University of Košice was found in 1952. In the first years this school consisted only of three Faculties, namely the Faculty of Mining, Faculty of Metallurgy and Faculty of Mechanical Engineering with few of Departments. Teaching and research activities at the Mining Faculty from begining has been based on the staff members of the Mining Department (now Department of Mining and Geotechnics. During the last 50 years Department of Mining has been growing in terms of the number of subject, laboratories, staff members, students etc., and finished their diploma in total 1101 mining engineers At the begin of this period Department was ment to meet the needs of the Slovak mineral industry relating to the education of engineers and research works in the following areas:,underground mining of mineral deposits, open pit mine, stability problems , rock mechanics, design and construction of mines, but now also in computing and information technologies. At present the Department offers courses in various fields of mining and geotechnics, which cover a very wide range of technical problems arising in mining industry and geotechnical praxis, including rescue, fire and safety course. Full-time study at the Department takes five years and leads to a Master´s degree of mining engineering. The study program comprises also an obligatory practical work. The students´practical training is usually divided into 2 terms each of 2-3 weeks duration. In the last semester the students are preparing their Master´s degree thesis.

  9. Geotechnical Perspectives on the Waste Isolation Pilot Plant (WIPP)

    International Nuclear Information System (INIS)

    Francke, Chris T.; Hansen, Frank D.; Knowles, M. Kathyn; Patchet, Stanley J.; Rempe, Norbert T.

    1999-01-01

    The Waste Isolation Pilot Plant (WIPP) is the first nuclear waste repository certified by the United States Environmental Protection Agency. Success in regulatory compliance resulted from an excellent natural setting for such a repository, a facility with multiple, redundant safety systems, and from a rigorous, transparent scientific and technical evaluation. The WIPP story, which has evolved over the past 25 years, has generated a library of publications and analyses. Details of the multifaceted program are contained in the cited references. Selected geotechnical highlights prove the eminent suitability of the WIPP to serve its congressionally mandated purpose

  10. Nuclear Power Plant project site selection geotechnical considerations

    International Nuclear Information System (INIS)

    Katti, V.J.; Banerjee, D.C.

    1997-01-01

    During the selection of a site for Nuclear Power Plant (NPP) and Radioactive Waste Plant (RWP), geotechnical investigations play a significant role in deciding merits and demerits of the sites. Any accidents in these units can play havoc on mankind and may leave bitter imprints on generations to come. Hence proper care has to be taken at the early stage for selecting the sites. Site selection procedure is a complicated one, because it involves experts from various disciplines like geology, geophysics, civil, mechanical electrical engineering, health-physics and other fields

  11. Geotechnical characterization and construction methods for SSC tunnel excavation

    International Nuclear Information System (INIS)

    Nelson, P.P.; Lundin, T.K.

    1990-06-01

    The site for the Superconducting Super Collider (SSC) facility was selected in 1988 after a nationwide proposal competition. The selected site is located in Ellis County, Texas, surrounding the town of Waxahachie which is about 30 miles (48 km) south of the City of Dallas central business district. This paper will describe the geotechnical conditions anticipated for excavation at the SSC site. A general geologic and geomechanical description of the rock present will be followed by a summary of the site-specific conceptual design for the tunneled components of the SSC machine. The Supercollider project will include about 70 miles (113) km of tunnel excavation

  12. Specificity of Geotechnical Measurements and Practice of Polish Offshore Operations

    Directory of Open Access Journals (Sweden)

    Bogumil Laczynski

    2015-12-01

    Full Text Available As offshore market in Europe grows faster and faster, new sea areas are being managed and new ideas on how to use the sea potential are being developed. In North Sea, where offshore industry conducts intensive expansion since late 1960s, numerous wind farms, oil and gas platforms and pipelines have been put into operation following extensive research, including geotechnical measurement. Recently, a great number of similar projects is under development in Baltic Sea, inter alia in Polish EEZ, natural conditions of which vary from the North Sea significantly. In this paper, those differences are described together with some solutions to problems thereby arising.

  13. A geotechnical investigation of a deep ocean site

    International Nuclear Information System (INIS)

    Freeman, T.J.; Schuttenhelm, R.T.E.

    1990-01-01

    A site investigation in deep water often relies solely on laboratory tests to evaluate the geotechnical properties of the sediments. This imposes two fundamental limitations on the investigation: The maximum depth to which the properties can be profiled and the uncertainty of sample disturbance and de-pressurization effects on the measured data. This paper uses results from investigations performed in a water depth of 5.4 km at an abyssal plain site, Great Meteor East (GME), to illustrate how ambiguities can arise in laboratory measurements of strength, and discusses how a simple in-situ test, the expendable penetrator, can be used to corroborate the laboratory data

  14. Geotechnical research in the Hungarian Central Institute for the Development of Mining

    International Nuclear Information System (INIS)

    Schmieder, A.

    1979-01-01

    The paper describes the geotechnical project of the Hungarian Central Institute for the Development of Mining. The activities of the Department of Geophysics and Nuclear Technology in the field of isotope and radiochemistry for geotechnical research are discussed in detail. (Sz.J.)

  15. Design of quality assurance surveillance of geotechnical investigation in evaluation of nuclear power plants siting

    International Nuclear Information System (INIS)

    Made Pramayuni; Haendra Subekti

    2011-01-01

    System of building Nuclear Power Plants (NPP) is built above ground surface and rocks. Therefore, the geotechnical aspects evaluation of NPP siting in particular must be implemented properly and accurately. The successful of the design and construction of the building system is influenced by geotechnical conditions in the vicinity of NPP will be built. To be able to perform geotechnical analysis is good and true; it's required data of surface/underground completely. These data can be obtained directly not only from the geotechnical field investigations, but also can be obtained from the laboratory tests results. To ensure that geotechnical investigations are conducted effectively and efficiently, produce accurate data, as well as meeting the requirements of safety, health, safety, environmental, quality and economic, then the Quality Assurance Program (QAP) should be established and implemented. Supervision of the QAP implementation is required to ensure the work is done according to QAP that have been established and applicable requirement. (author)

  16. Proceedings of the 3. Canadian organic residuals and biosolids management conference[Manure, biosolids, and organic industrial/commercial residuals in land applications programs : improving beneficial reuse and protection of water quality

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    The management of organic residuals in Canada is becoming more challenging and complex, both socially and politically. This conference provided a forum to exchange the latest information on technical legislative and public awareness issues associated with organic residuals and biosolids management in Canada. It was attended by producers, managers, practitioners and regulators from across Canada who discussed various initiatives regarding the production, management use and disposal of organic residuals including municipal wastewater treatment biosolids, animal manures and pulp and paper sludges. The sessions of the conference were entitled: biosolids management; quality issues; public perception and health issues; composting; treatment technologies; waste to energy; technology; and, land application. The conference featured 50 presentations, of which 5 have been catalogued separately for inclusion in this database. refs., tabs., figs.

  17. Geotechnical and mineralogical characteristics of marl deposits in Jordan

    Science.gov (United States)

    Shaqour, Fathi M.; Jarrar, Ghaleb; Hencher, Steve; Kuisi, Mostafa

    2008-10-01

    Marls and marly limestone deposits cover most of Northern Jordan, where Amman City and its suburbs are located. These deposits serve as foundations for most buildings and roads as well as fill material for structural back filling, especially road bases and sub-bases. The present study aims at investigating the geotechnical characteristics and mineral composition of the marl units of these deposits through field investigations and laboratory testing. Using X-ray diffraction technique along with chemical analysis, representative samples of marl horizons were tested for mineral composition, and for a set of index and geotechnical properties including: specific gravity, grain size, Atterberg limits, Proctor compaction and shear strength properties. The test results show a positive linear relationship as expected between the clay content and both liquid and plastic limits. The tests results also show an inverse linear relationship between the clay content and the maximum dry density in both standard and modified compaction. This is attributed to the adsorption of water by the clay minerals. The relationship is more prominent in the case of modified compaction test. The results also indicate a similar relationship for the angle of internal friction. No clear correlation between cohesion and clay content was apparent.

  18. Geotechnical properties of ash deposits near Hilo, Hawaii

    Science.gov (United States)

    Wieczorek, G.F.; Jibson, R.W.; Wilson, R.C.; Buchanan-Banks, J. M.

    1982-01-01

    Two holes were hand augered and sampled in ash deposits near Hilo, Hawaii. Color, water content and sensitivity of the ash were measured in the field. The ash alternated between reddish brown and dark reddish brown in color and had water contents as high as 392%. A downhole vane shear device measured sensitivities as high as 6.9. A series of laboratory tests including grain size distribution, Atterberg limits, X-ray diffraction analysis, total carbon determination, vane shear, direct shear and triaxial tests were performed to determine the composition and geotechnical properties of the ash. The ash is very fine grained, highly plastic and composed mostly of gibbsite and amorphous material presumably allophane. The ash has a high angle of internal friction ranging from 40-43? and is classified as medium to very sensitive. A series of different ash layers was distinguished on the basis of plasticity and other geotechnical properties. Sensitivity may be due to a metastable fabric, cementation, leaching, high organic content, and thixotropy. The sensitivity of the volcanic ash deposits near Hilo is consistent with documented slope instability during earthquakes in Hawaii. The high angles of internal friction and cementation permit very steep slopes under static conditions. However, because of high sensitivity of the ash, these slopes are particularly susceptible to seismically-induced landsliding.

  19. 2. Symposium environmental geotechnics. Papers; 2. Symposium Umweltgeotechnik. Konferenzband

    Energy Technology Data Exchange (ETDEWEB)

    Klapperich, H. [TU Bergakademie Freiberg (Germany). Inst. fuer Geotechnik]|[Kompetenz-Zentrum fuer interdisziplinaeres Flaechenrecycling CIF e.V., Freiberg (ED); Katzenbach, R. [Deutsche Gesellschaft fuer Geotechnike e.V., Essen (Germany); Witt, K.J. [Bauhaus-Universitaet Weimar (Germany); Griessl, D. (eds.) [Verein Freiberger Geotechniker e.V. (Germany)

    2005-07-01

    The 2nd symposium of the chapter section 'Environmental Geotechnics' of DGGT follows the event in Weimar 2003 and focuses on the central topics of Landfill - Contaminated Sites - Brownfields. The stream 'Waste management - Waste Site technology' discusses legal requirements and technical alternatives, especially in view of many upcoming closures of landfill sites and associated surface sealing, as well as technical reports of case studies and developments. The contribution 'Ultimate storage of radioactive waste' illustrates the wider dimensions to geotechnical questions. Between the streams of 'Remediation Techniques' and 'Land Recycling/Land Management' a panel discussion 'From Brownfield Remediation to Land Management' is taking place. The aim is to discuss the way forward and the need to take up the opportunity for future town planning as well as the design of conversion sites and expansive former mining areas. Representatives of authorities involved and project participants have submitted their statements in advance to the following question: 1.) status of remediation - research and practice 2.) what practical significance is attributed to different remediation techniques for the remediation of brownfields? 3.) modern town planning/redevelopment of former mining areas - spatial planning - real estate economy - financing models for redeveloping land - which parameters/instruments work? (orig.)

  20. Proceedings of the Canadian Institute conference on compensation and benefit strategies for the energy and resource sectors : explore total rewards and gain a competitive edge while preserving the bottom line

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    This conference focused on the the role that compensation and benefits packages play in attracting new employees and retaining them in today's tight labour market. Methods of creating competitive compensation and benefits packages were described by leading human resource experts from across Canada. The conference also presented creative ways to compete for workers and to lower the rate of employee turnover by improving the work environment. The need for creative benefits solutions within the framework of established collective agreements was also reviewed. The legal ramifications involved in drug testing were identified along with information on both company and employee rights. The presentations emphasized the need for effective communications between employees and management to engage employees, and clarified why different demographics present unique challenges that require particular solutions. The conference included a learning session on improving corporate immigration policy and best practices in attracting and retaining an Aboriginal workforce. One of the 12 presentations featured at this conference has been catalogued separately for inclusion in this database. figs.

  1. Framing Canadian federalism

    National Research Council Canada - National Science Library

    Saywell, John; Anastakis, Dimitry; Bryden, Penny E

    2009-01-01

    ... the pervasive effects that federalism has on Canadian politics, economics, culture, and history, and provide a detailed framework in which to understand contemporary federalism. Written in honour of John T. Saywell's half-century of accomplished and influential scholarly work and teaching, Framing Canadian Federalism is a timely and fitting t...

  2. Proceedings of the Go-Expo Gas and Oil Exposition and the 4. Annual Canadian International Petroleum Conference and the 54. Annual Technical Meeting of the Petroleum Society of CIM : Global Challenges and Technology Integration. CD-ROM ed.

    International Nuclear Information System (INIS)

    2003-01-01

    A series of technical papers dealing with various aspects of petroleum geology and resource development were presented at this conference and trade show which was attended by local and international participants. The 27 sessions reflected the changes facing the petroleum industry in terms of fluctuating product prices, aging staff, maturing basins, frontier development, and environmental concerns. The conference is truly international with nearly one third of the 250 presentations coming from outside of Canada. The presentations were targeted for managers, engineers, technologists, geologists, and other petroleum industry specialists dealing with issues such as: business development; conventional oil and gas recovery; conventional and unconventional heavy oil recovery; corrosion, pipelines and process engineering; drilling engineering; enhanced recovery; environmental management; production operations; regulatory and operations management; reservoir fluid characterization; reservoir simulation; risk management; well test analysis; and, well design and completions. A total of 124 papers have been processed separately for inclusion in this database. refs., tabs., figs

  3. Geotechnical Issues in Total System Performance Assessments of Yucca Mountain

    International Nuclear Information System (INIS)

    HO, CLIFFORD K.; HOUSEWORTH, JIM; WILSON, MICHAEL L.

    1999-01-01

    A Total System Performance Assessment (TSPA) of Yucca Mountain consists of integrated sub-models and analyses of natural and engineered systems. Examples of subsystem models include unsaturated-zone flow and transport, seepage into drifts, coupled thermal hydrologic processes, transport through the engineered barrier system, and saturated-zone flow and transport. The TSPA evaluates the interaction of important processes among these subsystems, and it determines the impact of these processes on the overall performance measures (e.g., dose rate to humans). This paper summarizes the evaluation, abstraction, and combination of these subsystem models in a TSPA calculation, and it provides background on the individual TSPA subsystem components that are most directly impacted by geotechnical issues. The potential impact that geologic features, events, and processes have on the overall performance is presented, and an evaluation of the sensitivity of TSPA calculations to these issues is also provided

  4. Interim report - geotechnical site assessment methodology. Vol.1

    International Nuclear Information System (INIS)

    Tunbridge, L.W.; Richards, L.R.

    1983-05-01

    An interim report summarizing the research conducted on geotechnical site assessment methodology at the Carwynnen test mine in Cornwall. The geological setting of the test site in the Cornubian granite batholith is described. The effect of structure imposed by discontinuities on the engineering behaviour of rock masses is discussed and the scanline survey method of obtaining data on discontinuities in the rock mass is described. The requirement for remote geophysical methods of characterizing the mass is discussed and initial experiments using seismic and ultrasonic velocity measurements are reported. Computer programs to perform statistical analysis of the discontinuity patterns are described. Overcoring and hydraulic fracturing methods of determining the in-situ stress are briefly described and the results of a programme of in-situ stress measurements using the overcoring method are reported. (author)

  5. Bentonite. Geotechnical barrier and source for microbial life

    Energy Technology Data Exchange (ETDEWEB)

    Matschiavelli, Nicole; Kluge, Sindy; Cherkouk, Andrea [Helmholtz-Zentrum Dresden-Rossendorf e.V., Dresden (Germany). HZDR Young Investigator Group; Steglich, Jennifer

    2017-06-01

    Due to their properties, namely a high swelling capacity and a low hydraulic conductivity, Bentonites fulfil as geotechnical barrier a sealing and buffering function in the nuclear waste repository. Depending on the mineral composition Bentonites contain many suitable electron-donors and -acceptors, enabling potential microbial life. For the potential repository of highly radioactive waste the microbial mediated transformation of Bentonite could influence its properties as a barrier material. Microcosms were set up containing Bentonite and anaerobic synthetic Opalinus-clay-pore water solution under an N{sub 2}/CO{sub 2}-atmosphere to elucidate the microbial potential within selected Bentonites. Substrates like acetate and lactate were supplemented to stimulate potential microbial activity. First results show that bentonites represent a source for microbial life, demonstrated by the consumption of lactate and the formation of pyruvate. Furthermore, microbial iron-reduction was determined, which plays a crucial role in Betonite-transformation.

  6. Geotechnical properties of oil-contaminated Kuwaiti sand

    International Nuclear Information System (INIS)

    Al-Sanad, H.A.; Eid, W.K.; Ismael, N.F.

    1995-01-01

    Large quantities of oil-contaminated sands resulted from exploded oil wells, burning oil fires, the destruction of oil storage tanks, and the formation of oil lakes in Kuwait at the end of the Gulf War. An extensive laboratory testing program was carried out to determine the geotechnical characteristics of this material. Testing included basic properties, compaction and permeability tests, and triaxial and consolidation tests on clean and contaminated sand at the same relative density. Contaminated specimens were prepared by mixing the sand with oil in the amount of 6% by weight or less to match field conditions. The influence of the type of oil, and relative density was also investigated by direct shear tests. The results indicated a small reduction in strength and permeability and an increase in compressibility due to contamination. The preferred method of disposal of this material is to use it as a stabilizing material for other projects such as road construction

  7. Problem analysis of geotechnical well drilling in complex environment

    International Nuclear Information System (INIS)

    Kasenov, A K; Biletskiy, M T; Ratov, B T; Korotchenko, T V

    2015-01-01

    The article examines primary causes of problems occurring during the drilling of geotechnical wells (injection, production and monitoring wells) for in-situ leaching to extract uranium in South Kazakhstan. Such a drilling problem as hole caving which is basically caused by various chemical and physical factors (hydraulic, mechanical, etc.) has been thoroughly investigated. The analysis of packing causes has revealed that this problem usually occurs because of insufficient amount of drilling mud being associated with small cross section downward flow and relatively large cross section upward flow. This is explained by the fact that when spear bores are used to drill clay rocks, cutting size is usually rather big and there is a risk for clay particles to coagulate

  8. Geotechnical properties of oil-contaminated Kuwaiti sand

    Energy Technology Data Exchange (ETDEWEB)

    Al-Sanad, H.A.; Eid, W.K.; Ismael, N.F. [Kuwait Univ., Safat (Kuwait). Dept. of Civil Engineering

    1995-05-01

    Large quantities of oil-contaminated sands resulted from exploded oil wells, burning oil fires, the destruction of oil storage tanks, and the formation of oil lakes in Kuwait at the end of the Gulf War. An extensive laboratory testing program was carried out to determine the geotechnical characteristics of this material. Testing included basic properties, compaction and permeability tests, and triaxial and consolidation tests on clean and contaminated sand at the same relative density. Contaminated specimens were prepared by mixing the sand with oil in the amount of 6% by weight or less to match field conditions. The influence of the type of oil, and relative density was also investigated by direct shear tests. The results indicated a small reduction in strength and permeability and an increase in compressibility due to contamination. The preferred method of disposal of this material is to use it as a stabilizing material for other projects such as road construction.

  9. Geotechnical support and topical studies for nuclear waste geologic repositories

    International Nuclear Information System (INIS)

    1989-01-01

    The present report lists the technical reviews and comments made during the fiscal year 1988 and summarizes the technical progress of the topical studies. In the area of technical assistance, there were numerous activities detailed in the next section. These included 24 geotechnical support activities, including reviews of 6 Study Plans (SP) and participation in 6 SP Review Workshops, review of one whole document Site Characterization Plan (SCP) and participation in the Assembled Document SCP Review Workshops by 6 LBL reviewers; the hosting of a DOE program review, the rewriting of the project statement of work, 2 trips to technical and planning meetings; preparation of proposed work statements for two new topics for DOE, and 5 instances of technical assistance to DOE. These activities are described in a Table in the following section entitled ''Geoscience Technical Support for Nuclear Waste Geologic Repositories.''

  10. Application of a recently developed geotechnical carbon calculator in Europe

    Directory of Open Access Journals (Sweden)

    Sara Rios

    2016-07-01

    Full Text Available Recent research regarding soil stabilization has been increasingly concerned with environmental performance. The present paper applies the newly developed CO2(eq geotechnical calculator, created by the European Federation of Foundation Contractors and the The Deep Foundations Institute, to assess the behavior of three different binders used in the construction of cutter-soil mixing columns, which formed an embankment/bridge transition wedge. The binders were based on ordinary Portland cement, on a blast furnace slag and cement blend and alkali activated fly ash. Results show that the last two binders are significabtly more effective, in terms of environmental performance, than the more traditional cement-based binder. Although the blast furnace slag cement, at this early stage of the geopolymeric binders, appears as the most interesting option, the fact that the CO2/cost ratio of both options is very similar stands out.

  11. Bentonite. Geotechnical barrier and source for microbial life

    International Nuclear Information System (INIS)

    Matschiavelli, Nicole; Kluge, Sindy; Cherkouk, Andrea; Steglich, Jennifer

    2017-01-01

    Due to their properties, namely a high swelling capacity and a low hydraulic conductivity, Bentonites fulfil as geotechnical barrier a sealing and buffering function in the nuclear waste repository. Depending on the mineral composition Bentonites contain many suitable electron-donors and -acceptors, enabling potential microbial life. For the potential repository of highly radioactive waste the microbial mediated transformation of Bentonite could influence its properties as a barrier material. Microcosms were set up containing Bentonite and anaerobic synthetic Opalinus-clay-pore water solution under an N_2/CO_2-atmosphere to elucidate the microbial potential within selected Bentonites. Substrates like acetate and lactate were supplemented to stimulate potential microbial activity. First results show that bentonites represent a source for microbial life, demonstrated by the consumption of lactate and the formation of pyruvate. Furthermore, microbial iron-reduction was determined, which plays a crucial role in Betonite-transformation.

  12. Assessment of geotechnical issues associated with the PGS reservoir dyke

    Energy Technology Data Exchange (ETDEWEB)

    Besaw, David; Donnely, C.; Ghiabi, Hani; Doyle, Warren [Hatch, (Canada); Diallo, Alain [Ontario Power Generation, (Canada)

    2010-07-01

    The PGS reservoir has had several issues with seepage and seepage-related phenomena since its construction in 1953. In 1958, a major sinkhole on the upstream side of the near chaining 6+00 was found. Ontario Hydro decided to draw down the reservoir, repair the sinkhole area immediately and undertake a major grouting program. This paper presented a study of geotechnical issues associated with the PGS reservoir dyke. This study was launched to investigate the potential remedial solutions to maintain the long term safety of the dyke and to determine the ways to expand the energy generating capability of the facility. In this paper, the recent Hatch findings on the geology, construction history, hydrogeological setting and seepage evaluation were presented. Next, the assessment of future measures for seepage control and energy enhancement opportunities were discussed.

  13. Geotechnical site assessment for underground radioactive waste disposal in rock

    International Nuclear Information System (INIS)

    Hudson, J.A.

    1986-05-01

    This report contains a state-of-the-art review of the geotechnical assessment of Land 3 and Land 4 repository sites (at 100 - 300 m depth in rock) for intermediate level radioactive waste disposal. The principles established are also valid for the disposal of low and high level waste in rock. The text summarizes the results of 21 DoE research contract reports, firstly 'in series' by providing a technical review of each report and then 'in parallel' by considering the current state of knowledge in the context of the subjects in an interaction matrix framework. 1214 references are cited. It is concluded that four further research projects are required for site assessment procedures to be developed or confirmed. These are coupled modelling, mechanical properties, water flow and establishment of 2 phase site assessment procedures. (author)

  14. Geotechnical investigations on backfill materials in the Asse salt mine

    International Nuclear Information System (INIS)

    Kappei, G.

    1986-01-01

    The compression behaviour of rock salt grit is being investigated by compression tests at the Asse salt mine. The various test parameters are introduced and their results are discussed. The permeability of rock salt grit with saturated NaCl-brine in dependency upon the grain size and compactness, resp. the porosity, is being determined at the Asse salt mine. The test equipment and the results determined here are shown. In addition to laboratory tests, geotechnical investigations are taking place in a carnallitic chamber of the Asse salt mine which had been backfilled in earlier years. They chiefly concern measurements of the deformation rates in drifts - which were mined between the chambers in remaining pillars - as well as horizontal deformation measurements in the backfilling. (orig./DG)

  15. Geotechnical aspects of deep ocean radioactive waste disposal

    International Nuclear Information System (INIS)

    Freeman, T.J.

    1990-01-01

    The methods that might be used to bury radioactive waste in the deep ocean, and their likely effect on the sediment barrier, have been the subject of an international research program performed during the last ten years. This paper reviews the geotechnical aspects of deep ocean disposal and discusses how far the research performed has gone towards providing the information needed to assess this form of disposal. Considerable progress has been made during the course of the international program towards understanding the processes involved in the emplacement of heat generating waste (HGW) into the deep ocean bed and the subsequent interactions between the waste and the sediments. These processes do not appear to have a deleterious effect on the barrier properties of the sediments, and it is concluded that it is likely that HGW could be emplaced in the deep ocean in such a way that the seabed would provide an effective containment for the radionuclides

  16. Holistic simulation of geotechnical installation processes theoretical results and applications

    CERN Document Server

    2017-01-01

    This book provides recent developments and improvements in the modeling as well as application examples and is a complementary work to the previous Lecture Notes Vols. 77 and 80. It summarizes the fundamental work from scientists dealing with the development of constitutive models for soils, especially cyclic loading with special attention to the numerical implementation. In this volume the neo-hypoplasticity and the ISA (intergranular strain anisotropy) model in their extended version are presented. Furthermore, new contact elements with non-linear constitutive material laws and examples for their applications are given. Comparisons between the experimental and the numerical results show the effectiveness and the drawbacks and provide a useful and comprehensive pool for all the constitutive model developers and scientists in geotechnical engineering, who like to prove the soundness of new approaches.

  17. Validation of geotechnical software for repository performance assessment

    International Nuclear Information System (INIS)

    LeGore, T.; Hoover, J.D.; Khaleel, R.; Thornton, E.C.; Anantatmula, R.P.; Lanigan, D.C.

    1989-01-01

    An important step in the characterization of a high level nuclear waste repository is to demonstrate that geotechnical software, used in performance assessment, correctly models validation. There is another type of validation, called software validation. It is based on meeting the requirements of specifications documents (e.g. IEEE specifications) and does not directly address the correctness of the specifications. The process of comparing physical experimental results with the predicted results should incorporate an objective measure of the level of confidence regarding correctness. This paper reports on a methodology developed that allows the experimental uncertainties to be explicitly included in the comparison process. The methodology also allows objective confidence levels to be associated with the software. In the event of a poor comparison, the method also lays the foundation for improving the software

  18. Operational and geotechnical constraints to coal mining in Alaska's interior

    Energy Technology Data Exchange (ETDEWEB)

    Corser, P; Usibelli, M

    1989-01-01

    Surface mining of coal from the Poker Flats mining area to the north of Healy, Alaska began in 1978. Current operations involve a 25 m/sup 3/ walking dragline which strips two coal seams, using an extended bench on the second pass; a fleet of trucks and shovels are used for coal removal and some limited overburden stripping. Geotechnical constraints to mining within the steeply dipping coal deposits are discussed. The area had a number of landslides. During 1984, mining operations close to a landslide caused movement to resume. A mine plan was developed which allowed the coal to be safely removed without inducing additional movement. This involves a dipline mining scheme through the slide area. Future mine plans will acknowledge the hazards of mining through potentially unstable zones. Aerial photographs, field mapping and geological exploration were used. 1 ref., 6 figs.

  19. Geotechnical Field Data and Analysis Report, July 1989--June 1990

    International Nuclear Information System (INIS)

    1991-03-01

    The Geotechnical Field Data and Analysis Report documents the data obtained from geomechanical instruments in the underground at the Waste Isolation Pilot Plant (WIPP). The data are obtained as part of a routine monitoring program and do not include data from tests performed to support performance assessment studies by Sandia National Laboratories, the Scientific Advisor to the project. The purpose for obtaining the geomechanical data is to understand and predict performance of the repository during operations. During the Site and Preliminary Design Validation (SPDV) Program, the Architect/Engineer, for the project, produced quarterly reports to document the geomechanical performance of construction. Since 1987, after the completion of construction, the reports have been prepared annually by the Managing and Operating Contractor for the facility. This report includes data collected up to June 30, 1990, and describes the performance and conditions of selected areas from July 1, 1989, to June 30, 1990. 11 refs., 49 figs., 8 tabs

  20. Mock-up-CZ: dismantling of the experiment - Geotechnical results

    International Nuclear Information System (INIS)

    Svoboda, J.; Vasicek, R.

    2010-01-01

    Document available in extended abstract form only. The issue of the disposal of radioactive waste is one of the most pressing challenges of our age, for which, in most countries, the deep repository concept is generally considered to be the most suitable final solution. In order to make such a repository both safe and reliable, intensive research is underway worldwide. The construction of physical models is one approach to the study of the engineered barriers for deep geological repositories; one such experiment, Mock-Up-CZ, has been performed at the Centre of Experimental Geotechnics, CTU in Prague. The Mock-Up-CZ experiment simulated the vertical placement of a container with radioactive waste, an approach that is in line with the Swedish KBS-3 system. The physical model consisted of a barrier made up of bentonite blocks, powdered bentonite backfill, a heater and hydration and monitoring systems. The whole experiment was enclosed in a cylindrical box, whose construction was able to withstand high pressure due to bentonite swelling. A number of sensors (monitoring changes in temperature, pressure and moisture) were placed inside the bentonite barrier. The basic material used in the experiment consisted of a mixture of Czech bentonite from the Rokle deposit (85%), quartz sand (10%) and graphite (5%). The first phase of the experiment commenced on 7 May 2002, during which the heater was switched on, with no water input. After 6 months the second phase commenced in which water was introduced through the hydration system. This phase ended on 2nd January 2006 when the heater was switched off. After allowing time for cooling, the dismantling phase commenced (30 January 2006). After a further one and a half months (17 March 2006) the dismantling of the experimental vessel was completed. Post-decommissioning analysis continued until the end of 2007. Dismantling and post-decommissioning analysis were carried out according to a very detailed plan which included not only

  1. Mineralogy and geotechnical characteristics of some pottery clay

    Directory of Open Access Journals (Sweden)

    Mujib Olamide ADEAGBO

    2016-12-01

    Full Text Available The physical properties of soils, which are tremendously influenced by the active clay minerals in soil, are of great importance in geotechnical engineering. This paper investigates the clay-sized particles of the Igbara-Odo pottery clay, and compares results obtained with available data on the bulk sample, to determine their correlation and underline the dependence of the geotechnical properties of the bulk clay material on the clay-sized particles. The bulk clay sample consists of 52% sand-size particles, 21% silt and 27% clay. Analysis of the clay-sized particles and the bulk materials shows: specific gravity of 2.07 and 2.66, liquid limit of 91.0% and 33.0%, plastic limit of 27.5% and 14.3%, plasticity index of 63.5% and 18.7% and a linear shrinkage of 7.9% and 5.4%, for both clay-sized particles and bulk clay respectively. The activity value of the clay material (0.64 suggests the presence of Kaolinite and Ilite; and these were confirmed with X-Ray diffraction on the bulk sample and clay-sized particles. X-Ray diffraction patterns shows distinctive peaks which highlight the dominance of Kaolinite (with 8 peaks in the pottery clay sample for both clay-sized particles and bulk material; while traces of other clay minerals like Illite and Halloysite and rock minerals like Mica, Feldspar and Chrysotile were also found. These results suggest that the clay possesses high viability in the manufacturing of ceramics, refractory bricks, paper, fertilizer and paint. The clay material can be used as a subgrade in road construction, since it possesses low swelling characteristics.

  2. Geotechnical Analysis Report for July 2000-June 2001

    International Nuclear Information System (INIS)

    Westinghouse TRU Solutions

    2002-01-01

    This Geotechnical Analysis Report (GAR) presents and interprets the geotechnical data from the underground excavations at the Waste Isolation Pilot Plant (WIPP). The data, which are obtained as part of a regular monitoring program, are used to characterize conditions, to compare actual performance to the design assumptions, and to evaluate and forecast the performance of the underground excavations during operations. GARs have been available to the public since 1983. During the Site and Preliminary Design Validation (SPDV) Program, the architect/engineer for the project produced these reports on a quarterly basis to document the geomechanical performance during and immediately after excavation of the underground facility. Since the completion of the construction phase of the project in 1987, the management and operating contractor for the facility has prepared these reports annually. This report describes the performance and condition of selected areas from July 1, 2000, to June 30, 2001. It is divided into ten chapters. The remainder of Chapter 1 provides background information on WIPP, its mission, and the purpose and scope of the geomechanical monitoring program. Chapter 2 describes the local and regional geology of the WIPP site. Chapters 3 and 4 describe the geomechanical instrumentation located in the shafts and shaft stations, present the data collected by that instrumentation, and provide interpretation of these data. Chapters 5, 6, and 7 present the results of geomechanical monitoring in the three main portions of the WIPP underground facility (the access drifts, the Northern Experimental Area, and the Waste Disposal Area). Chapter 8 discusses the results of the Geoscience Program, which include fracture and stratigraphic mapping, borehole and core logging, and borehole observations. Chapter 9 provides an assessment of the hydrologic conditions near the Exhaust Shaft. Chapter 10 summarizes the results of the geomechanical monitoring and compares the

  3. Geotechnical Analysis Report for July 1999 - June 2000

    International Nuclear Information System (INIS)

    Westinghouse TRU Solutions

    2002-01-01

    This Geotechnical Analysis Report (GAR) presents and interprets the geotechnical data from the underground excavations at the Waste Isolation Pilot Plant (WIPP). The data, which are obtained as part of a regular monitoring program, are used to characterize conditions, to compare actual performance to the design assumptions, and to evaluate and forecast the performance of the underground excavations during operations. GARs have been available to the public since 1983. During the Site and Preliminary Design Validation (SPDV) Program, the architect/engineer for the project produced these reports on a quarterly basis to document the geomechanical performance during and immediately after excavation of the underground facility. Since the completion of the construction phase of the project in 1987, the management and operating contractor for the facility has prepared these reports annually. This report describes the performance and condition of selected areas from July 1, 1999, to June 30, 2000. It is divided into ten chapters. The remainder of Chapter 1 provides background information on the WIPP, its mission, and the purpose and scope of the geomechanical monitoring program. Chapter 2 describes the local and regional geology of the WIPP site. Chapters 3 and 4 describe the geomechanical instrumentation located in the shafts and shaft stations, present the data collected by that instrumentation, and provide interpretation of these data. Chapters 5, 6, and 7 present the results of geomechanical monitoring in the three main portions of the WIPP underground facility (the access drifts, the Northern Experimental Area, and the Waste Disposal Area). Chapter 8 discusses the results of the Geoscience Program, which includes fracture mapping, borehole logging, and borehole observations. Chapter 9 provides an assessment of the hydrologic conditions near the Exhaust Shaft. Chapter 10 summarizes the results of the geomechanical monitoring and compares the current excavation

  4. Model tests of geosynthetic reinforced slopes in a geotechnical centrifuge

    International Nuclear Information System (INIS)

    Aklik, P.

    2012-01-01

    Geosynthetic-reinforced slopes and walls became very popular in recent years because of their financial, technical, and ecological advantages. Centrifuge modelling is a powerful tool for physical modelling of reinforced slopes and offers the advantage to observe the failure mechanisms of the slopes. In order to replicate the gravity induced stresses of a prototype structure in a geometrically 1/N reduced model, it is necessary to test the model in a gravitational field N times larger than that of the prototype structure. In this dissertation, geotextile-reinforced slope models were tested in a geotechnical centrifuge to identify the possible failure mechanisms. Slope models were tested by varying slope inclination, tensile strengths of the geotextiles, and overlapping lengths. Photographs of the geotextile reinforced slope models in flight were taken with a digital camera and the soil deformations of geotextile reinforced slopes were evaluated with Particle Image Velocimetry (PIV). The experimental results showed that failure of the centrifuge models initiated at midheight of the slope, and occurred due to geotextile breakage instead of pullout. The location of the shear surface is independent of the tensile strength of the geotextile; it is dependent on the shear strength of the soil. It is logical to see that the required acceleration of the centrifuge at slope failure was decreased with increasing slope inclination. An important contribution to the stability of the slope models was provided by the overlapping of the geotextile layers. It has a secondary reinforcement effect when it was prolonged and passed through the shear surface. Moreover, the location of the shear surface observed with PIV analysis exactly matches the tears of the retrieved geotextiles measured carefully after the centrifuge testing. It is concluded that PIV is an efficient tool to instrument the slope failures in a geotechnical centrifuge.(author) [de

  5. Geotechnical Analysis Report for July 1999-June 2000

    Energy Technology Data Exchange (ETDEWEB)

    Westinghouse TRU Solutions

    2002-10-01

    This Geotechnical Analysis Report (GAR) presents and interprets the geotechnical data from the underground excavations at the Waste Isolation Pilot Plant (WIPP). The data, which are obtained as part of a regular monitoring program, are used to characterize conditions, to compare actual performance to the design assumptions, and to evaluate and forecast the performance of the underground excavations during operations. GARs have been available to the public since 1983. During the Site and Preliminary Design Validation (SPDV) Program, the architect/engineer for the project produced these reports on a quarterly basis to document the geomechanical performance during and immediately after excavation of the underground facility. Since the completion of the construction phase of the project in 1987, the management and operating contractor for the facility has prepared these reports annually. This report describes the performance and condition of selected areas from July 1, 1999, to June 30, 2000. It is divided into ten chapters. The remainder of Chapter 1 provides background information on the WIPP, its mission, and the purpose and scope of the geomechanical monitoring program. Chapter 2 describes the local and regional geology of the WIPP site. Chapters 3 and 4 describe the geomechanical instrumentation located in the shafts and shaft stations, present the data collected by that instrumentation, and provide interpretation of these data. Chapters 5, 6, and 7 present the results of geomechanical monitoring in the three main portions of the WIPP underground facility (the access drifts, the Northern Experimental Area, and the Waste Disposal Area). Chapter 8 discusses the results of the Geoscience Program, which includes fracture mapping, borehole logging, and borehole observations. Chapter 9 provides an assessment of the hydrologic conditions near the Exhaust Shaft. Chapter 10 summarizes the results of the geomechanical monitoring and compares the current excavation

  6. Geotechnical Analysis Report for July 2001 - June 2002

    International Nuclear Information System (INIS)

    Washington TRU Solutions LLC

    2002-01-01

    This Geotechnical Analysis Report (GAR) presents and interprets the geotechnical data from the underground excavations at the Waste Isolation Pilot Plant (WIPP). The data, which are obtained as part of a regular monitoring program, are used to characterize conditions, to compare actual performance to the design assumptions, and to evaluate and forecast the performance of the underground excavations. GARs have been available to the public since 1983. During the Site and Preliminary Design Validation (SPDV) Program, the architect/engineer for the project produced these reports on a quarterly basis to document the geomechanical performance during and immediately after excavation of the underground facility. Since the completion of the construction phase of the project in 1987, the management and operating contractor for the facility has prepared these reports annually. This report describes the performance and condition of selected areas from July 1, 2001, to June 30, 2002. It is divided into ten chapters. The remainder of Chapter 1 provides background information on WIPP, its mission, and the purpose and scope of the geomechanical monitoring program. Chapter 2 describes the local and regional geology of the WIPP site. Chapters 3 and 4 describe the geomechanical instrumentation located in the shafts and shaft stations, present the data collected by that instrumentation, and provide interpretation of these data. Chapters 5, 6, and 7 present the results of geomechanical monitoring in the three main portions of the WIPP underground facility (the access drifts, the Northern Experimental Area, and the Waste Disposal Area). Chapter 8 discusses the results of the Geoscience Program, which include fracture and stratigraphic mapping, borehole and core logging, and borehole observations. Chapter 9 summarizes the results of the geomechanical monitoring and compares the current excavation performance to the design requirements. Chapter 10 lists the References and Bibliography

  7. Geotechnical Analysis Report for July 2000-June 2001

    Energy Technology Data Exchange (ETDEWEB)

    Westinghouse TRU Solutions

    2002-09-26

    This Geotechnical Analysis Report (GAR) presents and interprets the geotechnical data from the underground excavations at the Waste Isolation Pilot Plant (WIPP). The data, which are obtained as part of a regular monitoring program, are used to characterize conditions, to compare actual performance to the design assumptions, and to evaluate and forecast the performance of the underground excavations during operations. GARs have been available to the public since 1983. During the Site and Preliminary Design Validation (SPDV) Program, the architect/engineer for the project produced these reports on a quarterly basis to document the geomechanical performance during and immediately after excavation of the underground facility. Since the completion of the construction phase of the project in 1987, the management and operating contractor for the facility has prepared these reports annually. This report describes the performance and condition of selected areas from July 1, 2000, to June 30, 2001. It is divided into ten chapters. The remainder of Chapter 1 provides background information on WIPP, its mission, and the purpose and scope of the geomechanical monitoring program. Chapter 2 describes the local and regional geology of the WIPP site. Chapters 3 and 4 describe the geomechanical instrumentation located in the shafts and shaft stations, present the data collected by that instrumentation, and provide interpretation of these data. Chapters 5, 6, and 7 present the results of geomechanical monitoring in the three main portions of the WIPP underground facility (the access drifts, the Northern Experimental Area, and the Waste Disposal Area). Chapter 8 discusses the results of the Geoscience Program, which include fracture and stratigraphic mapping, borehole and core logging, and borehole observations. Chapter 9 provides an assessment of the hydrologic conditions near the Exhaust Shaft. Chapter 10 summarizes the results of the geomechanical monitoring and compares the

  8. Geotechnical Analysis Report for July 2001 - June 2002

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2002-09-20

    This Geotechnical Analysis Report (GAR) presents and interprets the geotechnical data from the underground excavations at the Waste Isolation Pilot Plant (WIPP). The data, which are obtained as part of a regular monitoring program, are used to characterize conditions, to compare actual performance to the design assumptions, and to evaluate and forecast the performance of the underground excavations. GARs have been available to the public since 1983. During the Site and Preliminary Design Validation (SPDV) Program, the architect/engineer for the project produced these reports on a quarterly basis to document the geomechanical performance during and immediately after excavation of the underground facility. Since the completion of the construction phase of the project in 1987, the management and operating contractor for the facility has prepared these reports annually. This report describes the performance and condition of selected areas from July 1, 2001, to June 30, 2002. It is divided into ten chapters. The remainder of Chapter 1 provides background information on WIPP, its mission, and the purpose and scope of the geomechanical monitoring program. Chapter 2 describes the local and regional geology of the WIPP site. Chapters 3 and 4 describe the geomechanical instrumentation located in the shafts and shaft stations, present the data collected by that instrumentation, and provide interpretation of these data. Chapters 5, 6, and 7 present the results of geomechanical monitoring in the three main portions of the WIPP underground facility (the access drifts, the Northern Experimental Area, and the Waste Disposal Area). Chapter 8 discusses the results of the Geoscience Program, which include fracture and stratigraphic mapping, borehole and core logging, and borehole observations. Chapter 9 summarizes the results of the geomechanical monitoring and compares the current excavation performance to the design requirements. Chapter 10 lists the References and Bibliography.

  9. Geotechnical Parameters of Alluvial Soils from in-situ Tests

    Science.gov (United States)

    Młynarek, Zbigniew; Stefaniak, Katarzyna; Wierzbicki, Jedrzej

    2012-10-01

    The article concentrates on the identification of geotechnical parameters of alluvial soil represented by silts found near Poznan and Elblag. Strength and deformation parameters of the subsoil tested were identified by the CPTU (static penetration) and SDMT (dilatometric) methods, as well as by the vane test (VT). Geotechnical parameters of the subsoil were analysed with a view to using the soil as an earth construction material and as a foundation for buildings constructed on the grounds tested. The article includes an analysis of the overconsolidation process of the soil tested and a formula for the identification of the overconsolidation ratio OCR. Equation 9 reflects the relation between the undrained shear strength and plasticity of the silts analyzed and the OCR value. The analysis resulted in the determination of the Nkt coefficient, which might be used to identify the undrained shear strength of both sediments tested. On the basis of a detailed analysis of changes in terms of the constrained oedometric modulus M0, the relations between the said modulus, the liquidity index and the OCR value were identified. Mayne's formula (1995) was used to determine the M0 modulus from the CPTU test. The usefullness of the sediments found near Poznan as an earth construction material was analysed after their structure had been destroyed and compacted with a Proctor apparatus. In cases of samples characterised by different water content and soil particle density, the analysis of changes in terms of cohesion and the internal friction angle proved that these parameters are influenced by the soil phase composition (Fig. 18 and 19). On the basis of the tests, it was concluded that the most desirable shear strength parameters are achieved when the silt is compacted below the optimum water content.

  10. Geotechnical Analysis Report for July 1998 - June 1999

    International Nuclear Information System (INIS)

    Westinghouse

    2002-01-01

    This Geotechnical Analysis Report (GAR) presents and interprets the geotechnical data from the underground excavations at the Waste Isolation Pilot Plant (WIPP). The data, which are obtained as part of a regular monitoring program, are used to characterize conditions, to compare actual performance to the design assumptions, and to evaluate and forecast the performance of the underground excavations during operations. GARs have been available to the public since 1983. During the Site and Preliminary Design Validation (SPDV) Program, the architect/engineer for the project produced these reports on a quarterly basis to document the geomechanical performance during and immediately after excavation of the underground facility. Since the completion of the construction phase of the project in 1987, the management and operating contractor for the facility has prepared these reports annually. This report describes the performance and condition of selected areas from July 1, 1998, to June 30, 1999. It is divided into nine chapters. The remainder of Chapter 1.0 provides background information on the WIPP, its mission, and the purpose and scope of the geomechanical monitoring program. Chapter 2.0 describes the local and regional geology of the WIPP site. Chapters 3.0 and 4.0 describe the geomechanical instrumentation located in the shafts and shaft stations, present the data collected by that instrumentation, and provide interpretation of these data. Chapters 5.0, 6.0, and 7.0 present the results of geomechanical monitoring in the three main portions of the WIPP underground facility (the access drifts, the Northern Experimental Area, and the Waste Disposal Area). Chapter 8.0 discusses the results of the Geoscience Program, which includes fracture mapping, borehole logging, and borehole observations. Chapter 9.0 summarizes the results of the geomechanical monitoring and compares the current excavation performance to the design requirements

  11. Geotechnical Evaluation of a Ghanaian Black Cotton Soil for use as ...

    African Journals Online (AJOL)

    user

    quate attenuation/retardation capacity of the material are also very ... The chemical composition of the soil was determined using X-ray ... The coefficient of permeability was calculated from ..... Co. and Irish Geotechnical Services Ltd. Insti-.

  12. Sustainable use of oil sands for geotechnical construction and road building

    CSIR Research Space (South Africa)

    Anochie-Boateng, Joseph

    2011-02-01

    Full Text Available This symposium provides a forum for exchange of ideas on current research nationally and internationally on the use of industrial byproducts and other recycled materials in geotechnical construction. A key objective is to identify new opportunities...

  13. Temperature effects on geotechnical and hydraulic properties of bentonite hydrated with inorganic salt solutions

    DEFF Research Database (Denmark)

    Rashid, H. M. A.; Kawamoto, K.; Saito, T.

    2015-01-01

    © 2015, International Journal of GEOMATE. This study investigated the combined effect of temperature and single-species salt solutions on geotechnical properties (swell index and liquid limit) and hydraulic conductivity of bentonite applying different cation types, concentrations, and temperatures...

  14. Suggested best practice for geotechnical characterisation of permafrost in the Nordic countries

    DEFF Research Database (Denmark)

    Agergaard, Frederik Ancker; Ingeman-Nielsen, Thomas; Foged, Niels Nielsen

    2012-01-01

    Even though permafrost is a specialty within Nordic geotechnical engineering, engineers and researcher will be faced with managing the consequences of projected climatic influences to construction design in permafrost areas. This requires the determination of the frozen soil engineering propertie...

  15. pLog enterprise-enterprise GIS-based geotechnical data management system enhancements.

    Science.gov (United States)

    2015-12-01

    Recent eorts by the Louisiana Department of Transportation and Development (DOTD) and the : Louisiana Transportation Research Center (LTRC) have developed a Geotechnical Information : Database, with a Geographic Information System (GIS) interface....

  16. Methodology for the finding of geotechnical areas within the South African gold and platinum.

    CSIR Research Space (South Africa)

    Goler, G

    1998-12-01

    Full Text Available these geotechnical areas are derived from orebody information, depth, stratigraphy, major geological discontinuities, and regional hydrology. By combining this information, appropriate mining methods can be selected, for different areas the likely rock mass... behaviour can be ascertained. Areas of similar rock mass behaviour will be considered as a particular Regional Geotechnical Area, where a specific regional support strategy can be defined. Once mining commences more detailed information concerning...

  17. Geologic and geotechnical contributions to the Itataia mine project, State of Ceara, Brazil

    International Nuclear Information System (INIS)

    Tognon, A.A.; Virgili, J.C.; Mueller, M.

    1984-01-01

    The procedures and systematics involved in obtaining basic geologic-geotechnical geomechanical and hydrogeo-technical parameters to serve as an aid in the planning of mining activities for the Itataia deposit located in the Itatira uranium district are presented and discussed. The studies were performed in order to provide the essential elements for an initial geologic-geotechnical characterization of the massif. (D.J.M.) [pt

  18. Canadian nuclear risk experience

    International Nuclear Information System (INIS)

    Hamel, P.E.

    1982-05-01

    Risk assessment in the Canadian nuclear fuel cycle is a very important and complex subject. Many levels of government are involved in deciding the acceptable limits for the risks, taking into account the benefits for society [fr

  19. Fording Canadian Coal Trust

    Energy Technology Data Exchange (ETDEWEB)

    Popowich, J.; Millos, R. [Elk Valley Coal Corporation, Calgary, AB (Canada)

    2004-07-01

    This is the first of five slide/overhead presentations presented at the Fording Canadian Coal Trust and Tech Cominco Ltd. investor day and mine tour. The Fording Canadian Coal Trust is described. The Trust's assets comprise six Elk Valley metallurgical coal mines and six wollastonite operations (in the NYCO Group). Trust structure, corporate responsibility, organizational structure, reserves and resources, management philosophy, operating strategies, steel market dynamics, coal market, production expansion, sales and distribution are outlined. 15 figs., 5 tabs.

  20. Waste Isolation Pilot Plant. Quarterly geotechnical field data report, April-June 30, 1985

    International Nuclear Information System (INIS)

    1985-12-01

    This Quarterly Geotechnical Field Data Report (GFDR) presents information obtained from the geotechnical studies at the WIPP site underground facilities from April 1 through June 30, 1985, as well as all previous data collected from the geomechanical instruments. During this period, the geotechnical activities at the site included maintaining and repairing instruments and monitoring previously installed geomechanical instruments in shafts, underground drifts, and test rooms. The data presented in this GFDR reflect the update of continuing measurements and monitoring. Also continuing and included in this report are preliminary geotechnical and structural analyses and interpretations of the data. The GFDR is organized into two principal parts. The first part, Geotechnical Field Data, presents in graphical form all the data collected since April 1982 from the geomechanical instruments. Presented in the second part, Evaluation and Analyses, are preliminary interpretations and analyses of the data. In this report, continuing geotechnical assessment of all the facility features is presented. The computational analyses section presents the preliminary analysis of the waste shaft. Also included in the second part are separate sections on evaluation and interpretation of the instrumentation measurements, and an updated description and evaluation of observed behavior of the underground openings

  1. Potential US/Canadian cooperative activities in geological disposal of radioactive waste

    International Nuclear Information System (INIS)

    Duguid, J.O.

    1980-03-01

    A joint review meeting between the US and Canada was held on June 19 and 20, 1979 to discuss waste isolation activities in crystalline rocks. The review meeting served the purposes of an initial information transfer and as a mechanism to stimulate thinking for a workshop on US/Canadian cooperative programs which was held on June 21, 1979. The workshop participants divided into working groups to discuss areas of potential cooperation: the Administrative Working Group established protocol for information exchange and cooperative activities; the Geotechnical Working Group selected activities in exploration, field testing, instrumentation and measurement technique development, monitoring, and quality assurance where cooperation would be of benefit to both countries; and the Assessment/Modeling Working Group discussed areas in model development and verification, engineered barriers, radiation effects, hydrologic properties of fractured rocks, waste form leaching, and sorption where cooperation would enhance both the US and Canadian programs

  2. INTERCARTO CONFERENCES

    OpenAIRE

    Vladimir Tikunov

    2010-01-01

    The InterCarto conferences are thematically organized to target one of the most pressing problems of modern geography—creation and use of geographical information systems (GISs) as effective tools for achieving sustainable development of territories. Over the years, from 1994 to 2009, 1872 participants from 51 countries and 156 cities, who made 1494 reports, attended the conferences. There were 1508 participants from 49 regions of Russia making 1340 presentations. The conferences hosted 31 di...

  3. Effect of Metakaolin on the geotechnical properties of Expansive Soil

    Directory of Open Access Journals (Sweden)

    Mahmoud D. Ahmed

    2015-12-01

    Full Text Available Expansive soil spreads in Iraq and some countries of the world. But there are many problems can be occurred to the structures that built on, so we must study the characteristics of these soils due to the problems that may be caused to these structures which built on these kinds of soil and then study the methods of treatment. The present study focuses on improving the geotechnical properties of expansive soils by treating it Metakaolin(M. Metakaolin (M has never been used before as an improvement material for stabilizing the expansive soil . Metakaolin is a pozzolanic material. It’s obtained by calcination of kaolinite clay at temperatures from 700°C to 800°C. Kaolin chemical composition is basically aluminous silicates hydrates associated with Mn, Fe, Ca, K, Na. Its crystal has a lattice structure of tetrahedral and octahedral layers with interplanar distance of 7.2 Å. The soil used in the present study can be classified according to the Unified Soil Classification System as clay with high plasticity (CH .

  4. Geotechnical Properties of Rubber Tires and Sediments Mixtures

    Directory of Open Access Journals (Sweden)

    H. Sellaf

    2014-04-01

    Full Text Available An experimental work was undertaken to study the effect of rubber tires on the geotechnical properties of a dredged sediment, using a mixing ratio of large size. For comparison, two types of soil were studied (dredged sediment from Fergoug dam and Tizi Tuff from the north west of Algeria. Taking into account the high compressibility and the low water absorption of the rubber tires, grain size analysis, density, Atterberg limits analysis, chemical composition, direct shear tests, loading-unloading tests, modified Proctor and CBR tests are performed on the two soils and their mixtures with different scrap tire rubber (10, 20, 25 and 50%. The results show that liquid limits and plastic indexes decrease with the scrap tire rubber content and that the decrease is more significant for soil with high plasticity. Cohesion also decreases with scrap tire rubber content when the internal friction angle is vacillating. Compression and recompression indexes increase gradually with the scrap tire rubber content and the variation for compression index is more significant for the two soils. Compaction characteristics and CBR values decrease with scrap tire rubber content. The CBR values for W=3% are important compared to those with W=5% excepted for mixture with (75% tuff and 25% scrap tire rubber. The results show that the scrap tire rubber can be used as a reinforcement material for dredged soil, but with a content that should not highly affect the compressibility.

  5. Improving geotechnical properties of clayey soil using polymer material

    Directory of Open Access Journals (Sweden)

    Karim Hussein

    2018-01-01

    Full Text Available This study illustrates the application of polymer material for clayey soil stabilization. The article will focus on studying the strength behavior of the clayey soils reinforced with homogenously polymer fiber. In the current research, “polypropylene” was selected as polymer material to reinforce the natural clay soil. This polymer fiber was added to the clayey soil with four different percentages of (0, 1.5, 3, and 5% by weight of soil. Various tests with different polymer contents were performed to study the effect of using such a polymer as a stabilizing agent on geotechnical properties of clay. As the fiber content increases, the optimum moisture content (OMC is increased while the specific gravity decreases. For Atterberg’s limits, the results indicated increasing liquid limit and plasticity index while decreasing plastic limit with increase in polymer content. The outcomes of the tests also reflected a considerable improvement in the unconfined compressive strength with noticeable improvement in the shear strength parameter (undrained shear strength, cu of the treated soils. The undrained shear strength obtained from treated soil with 5% polymer addition is more than three times that of the untreated soil. With an increase in polymer content, the consolidation parameters (Compression index Cc and recompression index Cr decreases. Finally, the benefit of the reinforcement is increased with increasing polymer fiber content.

  6. Effects of Surfactant on Geotechnical Characteristics of Silty Soil

    International Nuclear Information System (INIS)

    Rahman, Z.A.; Sahibin, A.R.; Lihan, T.; Idris, W.M.R.; Sakina, M.

    2013-01-01

    Surfactants are often used as a cleaning agent for restoration of oil-contaminated soil. However the effect of surfactant on the geotechnical properties of soil is not clearly understood. In this study, the effects of surfactant on silty soil were investigated for consistency index, compaction, permeability and shear strength. Sodium dodecyl sulfate (SDS) was used in this study to prepare the surfactant-treated soil. Our results showed that the soil with added surfactant exhibited a decrease in liquid and plastic limit values. Maximum dry densities increased and optimum moisture contents decreased as contents of added surfactant were increased. The presence of surfactant assists the soil to achieve maximum density at lower water content. The addition of surfactant decreased the permeability of soil from 6.29 x 10 -4 to 1.15 x 10 -4 ms -1 . The shear strength of soil with added surfactant was examined using the undrained unconsolidated triaxial tests. The results showed that the undrained shear strength, Cu was significantly affected, decreased from 319 kPa to 50 kPa for soil with 20 % of added surfactant. The results of this study showed that the presence of surfactant in soil can modify the mechanical behaviour of the soil. (author)

  7. Effects of leachate on geotechnical characteristics of sandy clay soil

    Science.gov (United States)

    Harun, N. S.; Ali, Z. Rahman; Rahim, A. S.; Lihan, T.; Idris, R. M. W.

    2013-11-01

    Leachate is a hazardous liquid that poses negative impacts if leaks out into environments such as soil and ground water systems. The impact of leachate on the downgraded quality in terms of chemical characteristic is more concern rather than the physical or mechanical aspect. The effect of leachate on mechanical behaviour of contaminated soil is not well established and should be investigated. This paper presents the preliminary results of the effects of leachate on the Atterberg limit, compaction and shear strength of leachate-contaminated soil. The contaminated soil samples were prepared by mixing the leachate at ratiosbetween 0% and 20% leachate contents with soil samples. Base soil used was residual soil originated from granitic rock and classified as sandy clay soil (CS). Its specific gravity ranged between 2.5 and 2.64 with clay minerals of kaolinite, muscovite and quartz. The field strength of the studied soil ranged between 156 and 207 kN/m2. The effects of leachate on the Atterberg limit clearly indicated by the decrease in liquid and plastic limit values with the increase in the leachate content. Compaction tests on leachate-contaminated soil caused the dropped in maximum dry density, ρdry and increased in optimum moisture content, wopt when the amount of leachate was increased between 0% and 20%. The results suggested that leachate contamination capable to modify some geotechnical properties of the studied residual soils.

  8. Improving the geotechnical behavior of sand through cohesive admixtures

    Directory of Open Access Journals (Sweden)

    Mohie eldin Mohamed Afify Elmashad

    2018-04-01

    Full Text Available Irrigation projects in Egypt have been facing tremendous challenges, mostly is the scarcity of irrigation water. The current research presents the effect of different cohesive admixture on the conductivity of siliceous sand in general and its other geotechnical properties. Two different types of conventional swelling clay from (Toshka, 6th of October as well as bentonite were used to construct the irrigation canals and embankment. The results indicated that increase in the plasticity properties of the treated soil also decrease the permeability and infiltration. Moreover, the dry density of 2.08 t/m3 was obtained from sand and 20% 6th of October mixture, also the CBR of 31.20% were obtained from sand and 8% 6th of October mixture. Increasing the bentonite ratio increases the cohesion and decreasing the permeability. The swelling ratios of sand 6th of October Clay mixture is equal to 0.28%, and the fictitious stress at which the swelling ratio is nil, is equal to 16 kPa. Keywords: Sand, Swelling clay, Bentonite, Compaction test, Consolidation test, Triaxial test

  9. Groundwater movements around a repository. Geological and geotechnical conditions

    International Nuclear Information System (INIS)

    Stille, H.; Burgess, A.; Lindblom, U.E.

    1977-09-01

    The report was prepared as one of a series of technical reports within a study of the groundwater movements around a repository for radioactive waste in the Precambrian bedrock of Sweden. This assessment is intended to provide basic geotechnical data for the analysis. These data include properties and conditions that are representative of the intact rock, the rock mass in general, and the groundwater regime. As there exist a considerable range in the mineralogy of potentially suitable plutonic rocks and since a specific site has not yet been selected, all of the parameters presented in this report must be based on presumptive geological and hydrogeological conditions. Where possible, data for two potential site areas, namely Oskarshamn and Forsmark, are presented. This report is divided into four parts. First, a brief description of the procedure for modelling groundwater movements is presented, along with a tabulation of the important parameters. Secondly, a description of the geological and hydrogeological conditions of the Fennoscandian shield, as well as of the two general site areas, is given. The final two sections of the report provide thermomechanical and geohydrological characteristics and properties of the host rock

  10. Role to Be Played by Independent Geotechnical Supervision in the Foundation for Bridge Construction

    Science.gov (United States)

    Sobala, Dariusz; Rybak, Jarosław

    2017-10-01

    Some remarks concerning the necessity of employing an independent and over all ethical geotechnical survey were presented in the paper. Starting from the design phase, through the whole construction process, the importance of geotechnical engineer is stated in legal acts. Numerous testing technologies serve for the calibration of geotechnical technologies and allow for confirming the quality and capacity of piles. Special emphasis was payed to the involvement of scientifical and research institutions which can not only serve services but also can postprocess and methodize collected data. Such databases enable for new codes, methods and recommendations. Selection of deep foundations for bridge-type structures is most often dependent on complex geotechnical conditions, concentrated loads and constraints for pier displacements. Besides the last ones, prior to more common introduction of the design-construct system, could be a convenient justification for design engineer, who imposed deep foundation because he did not want or was not able to estimate the effect of pier settlement on civil engineering structure. The paper provides some notes about the need to engage a geotechnical supervising service of high competency and ethical quality during engineering and construction stages of foundations for bridge-type structures where legal requirements are of special consideration. Successive stages of projects are reviewed and research methods used for current calibration of geotechnical technologies and verification of geotechnical work quality are analysed. Special attention is given to potential involvement of independent R&D institutions which, apart from rendering specific services, also collect and systemize the research results thus enabling, in the long term, to revise engineering standards, instructions and guidelines.

  11. Canadian competitive advantage

    International Nuclear Information System (INIS)

    Wills, J.

    1997-01-01

    The evolution of the Canadian petrochemical industry was outlined, emphasizing the proximity to feedstocks as the principal advantage enjoyed by the industry over its international competitors. Annual sales statistics for 1995 were provided. Key players in the Canadian petrochemical industry (Nova, Dow, DuPont, Methanex, Esso, Union Carbide, Shell and Celanese), their share of the market and key products were noted. Manufacturing facilities are located primarily in Alberta, southern Ontario and Quebec. The feedstock supply infrastructure, historical and alternative ethane pricing in Canada and the US, the North American market for petrochemicals, the competitiveness of the industry, tax competitiveness among Canadian provinces and the US, the Canada - US unit labour cost ratio, ethylene facility construction costs in Canada relative to the US Gulf Coast, and projected 1997 financial requirements were reviewed. 19 figs

  12. Outlook for Canadian refining

    International Nuclear Information System (INIS)

    Boje, G.

    1998-01-01

    The petroleum supply and demand balance was discussed and a comparison between Canadian and U.S. refineries was provided. The impact of changing product specifications on the petroleum industry was also discussed. The major changes include sulphur reductions in gasoline, benzene and MMT additives. These changes have been made in an effort to satisfy environmental needs. Geographic margin variations in refineries between east and west were reviewed. An overview of findings from the Solomon Refining Study of Canadian and American refineries, which has been very complimentary of the Canadian refining industry, was provided. From this writer's point of view refinery utilization has improved but there is a threat from increasing efficiency of US competitors. Environmental issues will continue to impact upon the industry and while the chances for making economic returns on investment are good for the years ahead, it will be a challenge to maintain profitability

  13. INTERCARTO CONFERENCES

    Directory of Open Access Journals (Sweden)

    Vladimir Tikunov

    2010-01-01

    Full Text Available The InterCarto conferences are thematically organized to target one of the most pressing problems of modern geography—creation and use of geographical information systems (GISs as effective tools for achieving sustainable development of territories. Over the years, from 1994 to 2009, 1872 participants from 51 countries and 156 cities, who made 1494 reports, attended the conferences. There were 1508 participants from 49 regions of Russia making 1340 presentations. The conferences hosted 31 different sections, most popular of which were Environmental GIS-Projects: Development and Experience, Sustainable Development and Innovative Projects, GIS: the Theory and Methodology, Projects for Russia and Regions, and GIS-Technologies and Digital Mapping. The next annual InterCarto-InterGIS conference will take place in December 2011. The Russian component of the conference will be held in the Altay Kray followed by another meeting on Bali, Indonesia

  14. Canadian Irradiation Centre

    International Nuclear Information System (INIS)

    1987-05-01

    The Canadian Irradiation Centre is a non-profit cooperative project between Atomic Energy of Canada Limited, Radiochemical Company and Universite du Quebec, Institut Armand-Frappier, Centre for Applied Research in Food Science. The Centre's objectives are to develop, demonstrate and promote Canada's radiation processing technology and its applications by conducting applied research; training technical, professional and scientific personnel; educating industry and government; demonstrating operational and scientific procedures; developing processing procedures and standards, and performing product and market acceptance trials. This pamphlet outlines the history of radoation technology and the services offered by the Canadian Irradiation Centre

  15. Application of Crushed Concrete in Geotechnical Engineering - Selected Issues

    Science.gov (United States)

    Kawalec, Jacek; Kwiecien, Slawomir; Pilipenko, Anton; Rybak, Jarosław

    2017-12-01

    The reuse of building materials becomes an important issue in sustainable engineering. As the technical requirements for civil engineering structures changes with time and the life time is limited, the need of building new objects meets the necessity of recycling of the existing ones. In the case of steel structures, the possibility of recycling is obvious, also in the case of wooden constructions, the possibility of “burning” solves the problem. The concrete waste is generated mainly as a result of the demolition and reconstruction of residential and industrial buildings. These types of waste are basically made from crushed rocks and cement minerals and contain non-hydrated cement particles in its composition. Concrete poses a lot of problems mainly for two reasons. It is difficult to crush, heavy and hard to transport and demanding in reuse. Different fractions (particle sizes) may be used for different purposes. Starting from very fine particles which can be used in concrete production, through regular 16-300 mm fractions used to form new fills and fill the mats, up to very irregular mixtures used to form stone columns by means of Impulse Compaction or in Dynamic Replacement. The presented study juxtaposes authors experience with crushed concrete used in civil engineering, mainly in geotechnical projects. Authors’ experiences comprise the application of crushed concrete in the new concrete production in Russia, changing pulverized bridge into the fill of mesh sacks, or mattresses used as an effective way to protect the shoreline and the New Orleans East land bridge after Katrina storm (forming a new shoreline better able to withstand wave actions), and finally the use of very irregular concrete fractions to form stone columns in week soils on the example of railway and road projects in Poland. Selected case studies are presented and summarized with regard to social, technical and economic issues including energy consumption needed for proposed technologies

  16. The STRATAFORM Project: U.S. Geological Survey geotechnical studies

    Science.gov (United States)

    Minasian, Diane L.; Lee, Homa J.; Locat, Jaques; Orzech, Kevin M.; Martz, Gregory R.; Israel, Kenneth

    2001-01-01

    This report presents physical property logs of core samples from an offshore area near Eureka, CA. The cores were obtained as part of the STRATAFORM Program (Nittrouer and Kravitz, 1995, 1996), a study investigating how present sedimentation and sediment transport processes influence long-term stratigraphic sequences preserved in the geologic record. The core samples were collected during four separate research cruises to the northern California study area, and data shown in the logs of the cores were collected using a multi-sensor whole core logger. The physical properties collected are useful in identifying stratigraphic units, ground-truthing acoustic imagery and sub-bottom profiles, and in understanding mass movement processes. STRATA FORmation on Margins was initiated in 1994 by the Office of Naval Research, Marine Geology and Geophysics Department as a coordinated multi-investigator study of continental-margin sediment transport processes and stratigraphy (Nittrouer and Kravitz, 1996). The program is investigating the stratigraphic signature of the shelf and slope parts of the continental margins, and is designed to provide a better understanding of the sedimentary record and a better prediction of strata. Specifically, the goals of the STRATAFORM Program are to (Nittrouer and Kravitz, 1995): - determine the geological relevance of short-term physical processes that erode, transport, and deposit particles and those processes that subsequently rework the seabed over time scales - improve capabilities for identifying the processes that form the strata observed within the upper ~100 m of the seabed commonly representing 104-106 years of sedimentation. - synthesize this knowledge and bridge the gap between time scales of sedimentary processes and those of sequence stratigraphy. The STRATAFORM Program is divided into studies of the continental shelf and the continental slope; the geotechnical group within the U.S. Geological Survey provides support to both parts

  17. Development of a debris flow model in a geotechnical centrifuge

    Science.gov (United States)

    Cabrera, Miguel Angel; Wu, Wei

    2013-04-01

    Debris flows occur in three main stages. At first the initial soil mass, which rests in a rigid configuration, reaches a critic state releasing a finite mass over a failure surface. In the second stage the released mass starts being transported downhill in a dynamic motion. Segregation, erosion, entrainment, and variable channel geometry are among the more common characteristics of this stage. Finally, at the third stage the transported mass plus the mass gained or loosed during the transportation stage reach a flat and/or a wide area and its deposition starts, going back to a rigid configuration. The lack of understanding and predictability of debris flow from the traditional theoretical approaches has lead that in the last two decades the mechanics of debris flows started to be analysed around the world. Nevertheless, the validation of recent numerical advances with experimental data is required. Centrifuge modelling is an experimental tool that allows the test of natural processes under defined boundary conditions in a small scale configuration, with a good level of accuracy in comparison with a full scale test. This paper presents the development of a debris flow model in a geotechnical centrifuge focused on the second stage of the debris flow process explained before. A small scale model of an inclined flume will be developed, with laboratory instrumentation able to measure the pore pressure, normal stress, and velocity path, developed in a scaled debris flow in motion. The model aims to reproduce in a controlled environment the main parameters of debris flow motion. This work is carried under the EC 7th Framework Programme as part of the MUMOLADE project. The dataset and data-analysis obtained from the tests will provide a qualitative description of debris flow motion-mechanics and be of valuable information for MUMOLADE co-researchers and for the debris flow research community in general.

  18. Canadian heavy water production

    International Nuclear Information System (INIS)

    Dahlinger, A.; Lockerby, W.E.; Rae, H.K.

    1977-05-01

    The paper reviews Canadian experience in the production of heavy water, presents a long-term supply projection, relates this projection to the anticipated long-term electrical energy demand, and highlights principal areas for further improvement that form the bulk of our research and development program on heavy water processes

  19. Canadian petroleum industry review

    International Nuclear Information System (INIS)

    Feick, R. M.

    1997-01-01

    A wide ranging discussion about the factors that have influenced oil and natural gas prices, the differences of the Canadian market from international markets, the differences between eastern and western Canadian markets, and shareholders' perspectives on recent commodity price developments was presented. Developments in the OPEC countries were reviewed, noting that current OPEC production of 25 mmbbls is about 60 per cent higher than it was in 1985. It is expected that OPEC countries will continue to expand capacity to meet expected demand growth and the continuing need created by the UN embargo on Iraqi oil sales. Demand for natural gas is also likely to continue to rise especially in view of the deregulation of the electricity industry where natural gas may well become the favored fuel for incremental thermal generation capacity. Prices of both crude oil and natural gas are expected to hold owing to unusually low storage levels of both fuels. The inadequacy of infrastructure, particularly pipeline capacity as a key factor in the Canadian market was noted, along with the dynamic that will emerge in the next several years that may have potential consequences for Canadian production - namely the reversal of the Sarnia to Montreal pipeline. With regard to shareholders' expectations the main issues are (1) whether international markets reach back to the wellhead, hence the producer's positioning with respect to transportation capacity and contract portfolios, and (2) whether the proceeds from increased prices are invested in projects that are yielding more than the cost of capital. 28 figs

  20. Canadian gas resource

    International Nuclear Information System (INIS)

    Anon.

    1989-01-01

    Canadian exports of gas to the United States are a critical component of EMF-9 (North American Gas Supplies). However, it has been noted that there are differences between US expectations for imports and Canadian forecasts of export supply capacity. Recent studies by the National Petroleum Council (NPC) and the US Department of Energy (DOE) indicate that 1.8 to 2.4 Tcf of imports may be required in the mid to late 1990's; A recent study by Canada's National Energy Board (NEB) indicates that the conventional resource base may not be able to provide continued gas exports to the US after the mid 1990's and that frontier sources would need to be developed to meet US expectations. The discrepancies between US expectations and Canadian estimates of capacity are of great concern to US policymakers because they call into question the availability of secure supplies of natural gas and suggest that the cost of imports (if available) will be high. By implication, if shortages are to be averted, massive investment may be required to bring these higher cost sources to market. Since the long-term supply picture will be determined by the underlying resource base, EMF-9 participants have been asked to provide estimates of critical components of the Canadian resource base. This paper provides a summary of ICF-Lewin's recent investigation of both the Conventional and Tight Gas resource in Canada's Western Sedimentary Basin, which includes both quantitative estimates and a brief sketch of the analysis methodology

  1. Canadian petroleum industry

    Energy Technology Data Exchange (ETDEWEB)

    Dagher, J.H.

    1969-12-01

    This study covers the following Canadian petroleum industry categories: (1) a brief history; (2) the demand for Alberta crude; (3) U.S. oil policies; (4) overseas exploration; (5) the national oil policy; (6) the Montreal pipeline and its targets; (7) a continental oil policy; and (8) the impact of Arctic reserves. It is noted that large potential benefits will improve from the Manhattan navigating the Northwest Passage. Without prejudging the analysis now applied to the information gathered on this voyage, the Manhattan has greatly contributed to the solution of the problem of access to the Arctic islands. The picture for natural gas is less fraught with uncertainties. Unlike oil, where domestic and international considerations may weigh in U.S. policy decision, Canadian natural gas is likely to be allowed to enjoy its full economic potential in bridging the foreseeable U.S. supply gap and, inasmuch as this potential is ultimately tied with that for crude oil markets, the anticipated U.S. needs for Canadian natural gas may be expected to enhance U.S. interest in the overall well-being of the Canadian petroleum industry.

  2. Canadian hydrogen safety program

    International Nuclear Information System (INIS)

    MacIntyre, I.; Tchouvelev, A.V.; Hay, D.R.; Wong, J.; Grant, J.; Benard, P.

    2007-01-01

    The Canadian hydrogen safety program (CHSP) is a project initiative of the Codes and Standards Working Group of the Canadian transportation fuel cell alliance (CTFCA) that represents industry, academia, government, and regulators. The Program rationale, structure and contents contribute to acceptance of the products, services and systems of the Canadian Hydrogen Industry into the Canadian hydrogen stakeholder community. It facilitates trade through fair insurance policies and rates, effective and efficient regulatory approval procedures and accommodation of the interests of the general public. The Program integrates a consistent quantitative risk assessment methodology with experimental (destructive and non-destructive) failure rates and consequence-of-release data for key hydrogen components and systems into risk assessment of commercial application scenarios. Its current and past six projects include Intelligent Virtual Hydrogen Filling Station (IVHFS), Hydrogen clearance distances, comparative quantitative risk comparison of hydrogen and compressed natural gas (CNG) refuelling options; computational fluid dynamics (CFD) modeling validation, calibration and enhancement; enhancement of frequency and probability analysis, and Consequence analysis of key component failures of hydrogen systems; and fuel cell oxidant outlet hydrogen sensor project. The Program projects are tightly linked with the content of the International Energy Agency (IEA) Task 19 Hydrogen Safety. (author)

  3. Canadian Nuclear Association

    International Nuclear Information System (INIS)

    Reid, John

    1992-01-01

    It is the view of the Canadian Nuclear Association that continuing creation of economic wealth is vital to sustainable development. A plentiful supply of cheap energy is essential. Nuclear energy provides the cleanest source of bulk energy generation essential to any path of sustainable development

  4. The portable GIS applied to geotechnical inspections; O GIS portatil para inspecoes geotecnicas

    Energy Technology Data Exchange (ETDEWEB)

    Rabaco, Lis M.; Lins, Alexandre F. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil); Costa, Rogerio M.; Freitas, Carlos F. [CONCREMAT, Rio de Janeiro, RJ (Brazil)

    2005-07-01

    The purpose of this paper is to implement an interface using tool to pack the GIS application to carry out a field inspection. The solution was implemented on pocket equipment using a simplified map and database integrated with the GIS Corporative. The main objective is to avoid paper work in field inspections. The emphases are on geotechnical inspections in order to assist the recuperation of information about points with geotechnical risk. There are interfaces with external device as GPS for insertion of points of risk. A set of tools are developed for bidirectional synchronization among the Corporative GIS and the pocket devices. The project focused geotechnical inspections on field, in order to synchronize automatically the information collected with the pocket GIS application with a Web server, packing all information from field operation to managers. (author)

  5. Geotechnical Seismic Hazard Evaluation At Sellano (Umbria, Italy) Using The GIS Technique

    International Nuclear Information System (INIS)

    Capilleri, P.; Maugeri, M.

    2008-01-01

    A tool that has been widely-used in civil engineering in recent years is the geographic information system (GIS). Geographic Information systems (GIS) are powerful tools for organizing, analyzing, and presenting spatial data. The GIS can be used by geotechnical engineers to aid preliminary assessment through to the final geotechnical design. The aim of this work is to provide some indications for the use of the GIS technique in the field of seismic geotechnical engineering, particularly as regards the problems of seismic hazard zonation maps. The study area is the village of Sellano located in the Umbrian Apennines in central Italy, about 45 km east of Perugia and 120 km north-east of Rome The increasing importance attributed to microzonation derives from the spatial variability of ground motion due to particular local conditions. The use of GIS tools can lead to an early identification of potential barriers to project completion during the design process that may help avoid later costly redesign

  6. Geotechnical Parameters from Seismic Measurements: Two Field Examples from Egypt and Saudi Arabia

    KAUST Repository

    Khalil, Mohamed H.

    2016-03-18

    © 2016 EEGS. Geotechnical parameters were used to determine subsurface rock quality for construction purposes. We summarize the mathematical relationships used to calculate the geotechnical parameters from P- and S-wave velocities and density values. These relationships are applied to two field examples; the first is a regional seismic study in Egypt and the second is a 2-D seismic profile recorded in Saudi Arabia. Results from both field examples are used to determine the subsurface rock quality and locate zones that should be avoided during construction. We suggest combining all geotechnical parameters into one map using a normalized-weighted relation, which helps to locate the zones with high versus low rock quality for engineering purposes.

  7. Comparison Between Two Methods for Estimating the Vertical Scale of Fluctuation for Modeling Random Geotechnical Problems

    Science.gov (United States)

    Pieczyńska-Kozłowska, Joanna M.

    2015-12-01

    The design process in geotechnical engineering requires the most accurate mapping of soil. The difficulty lies in the spatial variability of soil parameters, which has been a site of investigation of many researches for many years. This study analyses the soil-modeling problem by suggesting two effective methods of acquiring information for modeling that consists of variability from cone penetration test (CPT). The first method has been used in geotechnical engineering, but the second one has not been associated with geotechnics so far. Both methods are applied to a case study in which the parameters of changes are estimated. The knowledge of the variability of parameters allows in a long term more effective estimation, for example, bearing capacity probability of failure.

  8. Proceedings of the national seminar on advanced construction techniques and geotechnical engineering

    International Nuclear Information System (INIS)

    Partheeban, P.; Poornima, C.A.; Guru, V.

    2015-02-01

    The objective of this seminar is to emphasize the need for developing modern construction materials in the era of technology. It also provides a forum for National Research Scholars, Construction Specialists and Professionals, Planners, Faculty, PG and UG Students to discuss and evolve solutions for various difficulties faced during construction. Theme of seminar includes Geotechnical site Investigation, Ground improvement Techniques, Soil Dynamics, Geotechnical Earthquake Engineering, Geo- Environmental Engineering, Self Compacting Concrete, Geopolymer Concrete and Concrete Technology, Cost Effective Construction Techniques, Limit state performance state approach Elastic and Elasto-plastic behavior and Reduction of Corrosion in concrete using Chemical admixtures. Paper relevant to INIS are indexed separately

  9. Geotechnical and Physico-Chemical Characterization of Low Lime Fly Ashes

    Directory of Open Access Journals (Sweden)

    Arif Ali Baig Moghal

    2013-01-01

    Full Text Available In order to explore the possibility of using low-lime fly ashes, the physical and chemical properties which have a direct bearing on their geotechnical and geoenvironmental behaviors have been investigated. In this paper, two types of low-lime fly ashes, originating from India, have been used. A brief account of various methods adopted in characterizing their physical, chemical, and geotechnical properties is presented. The relative importance of each of these properties in enhancing the bulk applicability of fly ashes has been brought out.

  10. Low-level waste disposal site geotechnical subsidence corrective measures: technical progress

    International Nuclear Information System (INIS)

    Phillips, S.J.; Winterhalder, J.A.; Gilbert, T.W.

    1983-01-01

    A geotechnical test facility has been constructed at the Hanford Site Richland Site Richland, Washington. The purpose of this facility is to quantitatively evaluate the performance of alternative technologies to ameliorate geomechanical subsidence in solid waste burial structures. Alternatives to be tested include; accelerating mass ground surface impact, and two optional subsurface rod injection/withdrawal techniques. The alternatives involve the principle of dynamic consolidation of buried waste and matrix materials. A description of the geotechnical test facility, the monitoring instrumentation used therein, laboratory soil mechanics data evaluation, and facility baseline monitoring data are presented. 6 references, 5 figures

  11. A contactless positioning system for monitoring discontinuities in three dimensions with geological and geotechnical applications

    Czech Academy of Sciences Publication Activity Database

    Rinaldi-Montes, N.; Rowberry, Matthew David; Frontera, C.; Baroň, I.; Garcés, G.; Blahůt, Jan; Pérez-López, R.; Pennos, C.; Martí, Xavier

    2017-01-01

    Roč. 88, č. 7 (2017), č. článku 074501. ISSN 0034-6748 R&D Projects: GA MŠk LM2010008 Institutional support: RVO:67985891 ; RVO:68378271 Keywords : mechanical discontinuities * contactless positioning system * magnetoresistive sensing * geotechnical engineering * structural health monitoring Subject RIV: JB - Sensors, Measurment, Regulation; BM - Solid Matter Physics ; Magnetism (FZU-D) OBOR OECD: Environmental and geological engineering , geotechnics; Condensed matter physics (including formerly solid state physics, supercond.) (FZU-D) Impact factor: 1.515, year: 2016

  12. Geotechnical environmental aspects of geothermal power generation at Herber, Imperial Valley, California

    Energy Technology Data Exchange (ETDEWEB)

    1976-10-01

    The feasibility of constructing a 25-50 MWe geothermal power plant using low salinity hydrothermal fluid as the energy source was assessed. Here, the geotechnical aspects of geothermal power generation and their relationship to environmental impacts in the Imperial Valley of California were investigated. Geology, geophysics, hydrogeology, seismicity and subsidence are discussed in terms of the availability of data, state-of-the-art analytical techniques, historical and technical background and interpretation of current data. Estimates of the impact of these geotechnical factors on the environment in the Imperial Valley, if geothermal development proceeds, are discussed.

  13. Geotechnical classification of deep and ultra-deep Witwatersrand mining areas, South Africa

    CSIR Research Space (South Africa)

    Schweitzer, JK

    1997-06-01

    Full Text Available ?cantly with depth (e.g. Gurtunca and Gay 1993a, b; Roberts et al. 1994), numerous researchers stress the importance of, and requirement for, geotechnical information, es- pecially geological features at great depths (e.g. Adams et al. 1981; Gay et al. 1984; Gay 1986...; Gay and Jager 1986a, b; Roberts and Jager 1991, 1993; Kullman et al. 1994; Gay et al. 1995a, b). The geotechnical information must also be considered when proposing modi?cations to current mining methods (Johnson and Schweitzer 1996). Mineralium...

  14. Using method of geotechnical diagnostics for oil and gas pipelines on the base of aerospace monitoring

    International Nuclear Information System (INIS)

    Shirinzade, A.; Gasanov, Kh.; Ragimov, R.; Timofeev, A.

    2008-01-01

    In the paper o the base of aerospatial images of decoding it is studied the problems of using the method of geotechnical diagnostics (GTD) for magistral pipelines. This technique is used for discovering potentially dangerous sections. It has been shown that the processes in geotechnical system have pecular properties on the earth surface which may be identified in terms of aerospace monitoring. Studing these properties one can conclude about state of the system as whole. It is described example of using the GTD method for practical evaluation of magistral pipeline

  15. Integrating weather and geotechnical monitoring data for assessing the stability of large scale surface mining operations

    Directory of Open Access Journals (Sweden)

    Steiakakis Chrysanthos

    2016-01-01

    Full Text Available The geotechnical challenges for safe slope design in large scale surface mining operations are enormous. Sometimes one degree of slope inclination can significantly reduce the overburden to ore ratio and therefore dramatically improve the economics of the operation, while large scale slope failures may have a significant impact on human lives. Furthermore, adverse weather conditions, such as high precipitation rates, may unfavorably affect the already delicate balance between operations and safety. Geotechnical, weather and production parameters should be systematically monitored and evaluated in order to safely operate such pits. Appropriate data management, processing and storage are critical to ensure timely and informed decisions.

  16. Geotechnical issues and guidelines for storage of compressed air in excavated hard rock caverns

    Energy Technology Data Exchange (ETDEWEB)

    Allen, R.D.; Doherty, T.J.; Fossum, A.F.

    1982-04-01

    The results of a literature survey on the stability of excavated hard rock caverns are presented. The objective of the study was to develop geotechnical criteria for the design of compressed air energy storage (CAES) caverns in hard rock formations. These criteria involve geologic, hydrological, geochemical, geothermal, and in situ stress state characteristics of generic rock masses. Their relevance to CAES caverns, and the identification of required research areas, are identified throughout the text. This literature survey and analysis strongly suggests that the chief geotechnical issues for the development and operation of CAES caverns in hard rock are impermeability for containment, stability for sound openings, and hydrostatic balance.

  17. Preliminary geotechnical evaluation of deep borehole facilities for nuclear waste disposal in shales

    International Nuclear Information System (INIS)

    Nataraj, M.S.; New Orleans Univ., LA

    1991-01-01

    This study is concerned with a preliminary engineering evaluation of borehole facilities for nuclear waste disposal in shales. Some of the geotechnical properties of Pierre, Rhinestreet, and typical illite shale have been collected. The influence of a few geotechnical properties on strength and deformation of host material is briefly examined. It appears that Pierre shale is very unstable and requires support to prevent collapse. Typical illite shale is more stable than Rhinestreet shale, although it undergoes relatively more deformation. 16 refs., 5 figs., 3 tabs

  18. Canadian HIV Pregnancy Planning Guidelines: No. 278, June 2012.

    Science.gov (United States)

    Loutfy, Mona R; Margolese, Shari; Money, Deborah M; Gysler, Mathias; Hamilton, Scot; Yudin, Mark H

    2012-10-01

    Four main clinical issues need to be considered for HIV-positive individuals and couples with respect to pregnancy planning and counselling: (1) pre-conceptional health; (2) transmission from mother to infant, which has been significantly reduced by combined antiretroviral therapy; (3) transmission between partners during conception, which requires different prevention and treatment strategies depending on the status and needs of those involved; and (4) management of infertility issues. The objective of the Canadian HIV Pregnancy Planning Guidelines is to provide clinical information and recommendations for health care providers to assist HIV-positive individuals and couples with their fertility and pregnancy planning decisions. These guidelines are evidence- and community-based and flexible, and they take into account diverse and intersecting local/population needs and the social determinants of health. Intended outcomes are (1) reduction of risk of vertical transmission and horizontal transmission of HIV, (2) improvement of maternal and infant health outcomes in the presence of HIV, (3) reduction of the stigma associated with pregnancy and HIV, and (4) increased access to pregnancy planning and fertility services. PubMed and Medline were searched for articles published in English or French to December 20, 2010, using the following terms: "HIV" and "pregnancy" or "pregnancy planning" or "fertility" or "reproduction" or "infertility" or "parenthood" or "insemination" or "artificial insemination" or "sperm washing" or "IVF" or "ICSI" or "IUI." Other search terms included "HIV" and 'horizontal transmission" or "sexual transmission" or "serodiscordant." The following conference databases were also searched: Conference on Retroviruses and Opportunistic Infections, International AIDS Conference, International AIDS Society, Interscience Conference on Antimicrobial Agents and Chemotherapy, the Canadian Association of HIV/AIDS Research, and the Ontario HIV Treatment

  19. Geotechnical Impacts of Hurricane Harvey Along the Texas, USA Coast

    Science.gov (United States)

    Smallegan, S. M.; Stark, N.; Jafari, N.; Ravichandran, N.; Shafii, I.; Bassal, P.; Figlus, J.

    2017-12-01

    As part of the NSF-funded Geotechnical Extreme Events Reconnaissance (GEER) Association response to Hurricane Harvey, a team of engineers and scientists mobilized to the coastal cities of Texas, USA from 1 to 5 September 2017. Damage to coastal and riverine structures due to erosion by storm surge, waves, and coastal and riverine flooding was assessed in a wide coastal zone between Corpus Christi and Galveston. Making initial landfall near Rockport, Texas on 26 August 2017, Hurricane Harvey was classified as a category 4 hurricane on the Saffir-Simpson scale with wind speeds exceeding 130 mph and an atmospheric pressure of 938 mbar. The storm stalled over the Houston area, pouring 40 inches of rain on an area encompassing more than 3,000 square miles. Hurricane Harvey, which remained a named storm for 117 hours after initial landfall, slowly moved east into the Gulf of Mexico and made final landfall near Cameron, Louisiana on 30 August. The GEER team surveyed sixteen main sites, extending from Mustang Island in the southwest to Galveston in the northeast and as far inland as Rosenburg. In Port Aransas, beach erosion and undercutting along a beach access road near Aransas Pass were observed. Due to several tide gauge failures in this area, the nearest NOAA tide gauge (#8775870 near Corpus Christi) was used to estimate water levels of 1.35 m, approximately 1.0 m above the predicted tide. In Holiday Beach, anchored retaining walls were inundated, causing backside scour along the entire length and exposing the sheetpile wall anchors. Along the Colorado River at the Highway 35 bridge near Bay City, active riverbank failure was observed and a sheet pile wall was found collapsed. Significant sediment deposits lined the vegetated riverbanks. A USGS stream gage recorded gage heights greater than 45 ft, exceeding the flood stage of 44 ft. Fronting a rubblemound seawall in Surfside Beach, a runnel and ridge formation was observed. Nearby at San Luis Pass, infilled scour

  20. Canadian seismic agreement

    International Nuclear Information System (INIS)

    Wetmiller, R.J.; Lyons, J.A.; Shannon, W.E.; Munro, P.S.; Thomas, J.T.; Andrew, M.D.; Lamontagne, M.; Wong, C.; Anglin, F.M.; Plouffe, M.; Lapointe, S.P.; Adams, J.; Drysdale, J.A.

    1990-04-01

    This is the twenty-first progress report under the agreement entitled Canadian Seismic Agreement between the US Nuclear Regulatory Commission (NRC) and the Canadian Commercial Corporation. Activities undertaken by the Geophysics Division of the Geological Survey of Canada (GD/GSC) during the period from July 01, 1988 to June 30, 1989 and supported in part by the NRC agreement are described below under four headings; Eastern Canada Telemetred Network and local network developments, Datalab developments, strong motion network developments and earthquake activity. In this time period eastern Canada experienced its largest earthquake in over 50 years. This earthquake, which has been christened the Saguenay earthquake, has provided a wealth of new data pertinent to earthquake engineering studies in eastern North America and is the subject of many continuing studies, which are presently being carried out at GD and elsewhere. 41 refs., 21 figs., 7 tabs

  1. Financing Canadian international operations

    International Nuclear Information System (INIS)

    Beagle, G.

    1996-01-01

    A primer on financing international operations by Canadian corporations was provided. Factors affecting the availability to project finance (location, political risk), the various forms of financing (debt, equity, and combinations), the main sources of government backed financing to corporations (the International Finance Corporation) (IFC), the European Bank for Reconstruction and Development (EBRD), the Asian Development Bank (ADB), the Overseas Property Insurance Corporation (OPIC), government or agency guarantees, political risk coverage, the use of offshore financial centres, and the where, when and how these various organizations operate, were reviewed. Examples of all of the above, taken from the experiences of Canadian Occidental Petroleum of Calgary in the U.S., in South America, in the Middle and Far East, and in Kazakhstan, were used as illustrations. figs

  2. Canadian Medicare: prognosis guarded.

    Science.gov (United States)

    Naylor, C D; Fooks, C; Williams, J I

    1995-08-01

    Beset by unprecedented fiscal pressures, Canadian medicare has reached a crossroads. The authors review the impact of recent cuts in federal transfer payments on provincial health care programs and offer seven suggestions to policymakers trying to accommodate these reductions. (1) Go slowly: public health care spending is no longer rising and few provinces have the necessary systems in place to manage major reductions. (2) Target reductions, rewarding quality and efficiency instead of making across-the-board cuts. (3) Replace blame with praise:give health care professionals and institutions credit for their contributions. (4) Learn from the successful programs and policies already in place across the country. (5) Foster horizontal and vertical integration of services. (6) Promote physician leadership by rewarding efforts to promote the efficient use of resources. (7) Monitor the effects of cutbacks: physician groups should cooperate with government in maintaining a national "report card" on services, costs and the health status of Canadians.

  3. Canadian fusion program

    International Nuclear Information System (INIS)

    Brown, T.S.

    1982-06-01

    The National Research Council of Canada is establishing a coordinated national program of fusion research and development that is planned to grow to a total annual operating level of about $20 million in 1985. The long-term objective of the program is to put Canadian industry in a position to manufacture sub-systems and components of fusion power reactors. In the near term the program is designed to establish a minimum base of scientific and technical expertise sufficient to make recognized contributions and thereby gain access to the international effort. The Canadian program must be narrowly focussed on a few specializations where Canada has special indigenous skills or technologies. The programs being funded are the Tokamak de Varennes, the Fusion Fuels Technology Project centered on tritium management, and high-power gas laser technology and associated diagnostic instrumentation

  4. Canadian Mathematical Congress

    CERN Document Server

    1977-01-01

    For two weeks in August, 1975 more than 140 mathematicians and other scientists gathered at the Universite de Sherbrooke. The occasion was the 15th Biennial Seminar of the Canadian Mathematical Congress, entitled Mathematics and the Life Sciences. Participants in this inter­ disciplinary gathering included researchers and graduate students in mathematics, seven different areas of biological science, physics, chemistry and medical science. Geographically, those present came from the United States and the United Kingdom as well as from academic departments and government agencies scattered across Canada. In choosing this particular interdisciplinary topic the programme committee had two chief objectives. These were to promote Canadian research in mathematical problems of the life sciences, and to encourage co-operation and exchanges between mathematical scientists" biologists and medical re­ searchers. To accomplish these objective the committee assembled a stim­ ulating programme of lectures and talks. Six ...

  5. Utilization of MatPIV program to different geotechnical models

    Science.gov (United States)

    Aklik, P.; Idinger, G.

    2009-04-01

    The Particle Imaging Velocimetry (PIV) technique is being used to measure soil displacements. PIV has been used for many years in fluid mechanics; but for physical modeling in geotechnical engineering, this technique is still relatively new. PIV is a worldwide growth in soil mechanics over the last decade owing to the developments in digital cameras and laser technologies. The use of PIV is feasible provided the surface contains sufficient texture. A Cambridge group has shown that natural sand contains enough texture for applying PIV. In a texture-based approach, the only requirement is for any patch, big or small to be sufficiently unique so that statistical tracking of this patch is possible. In this paper, some of the soil mechanic's models were investigated such as retaining walls, slope failures, and foundations. The photographs were taken with the help of the high resolution digital camera, the displacements of soils were evaluated with free software named as MatPIV and the displacement graphics between the two images were obtained. Nikon D60 digital camera is 10.2 MB and it has special properties which makes it possible to use in PIV applications. These special properties are Airflow Control System and Image Sensor cleaning for protection against dust, Active D-Lighting for highlighted or shadowy areas while shooting, advanced three-point AF system for fast, efficient and precise autofocus. Its fast and continuous shooting mode enables up to 100 JPEG images at three frames per second. Norm Sand (DIN 1164) was used for all the models in a glass rectangular box. For every experiment, MatPIV was used to calculate the velocities from the two images. MatPIV program was used in two ways such as easy way and difficult way: In the easy way, the two images with 64*64 pixels with 50% or 75% overlap of the interrogation windows were taken into consideration and the calculation was performed with a single iteration through the images and the result consisted of four

  6. Canadian Medicare: prognosis guarded.

    OpenAIRE

    Naylor, C D; Fooks, C; Williams, J I

    1995-01-01

    Beset by unprecedented fiscal pressures, Canadian medicare has reached a crossroads. The authors review the impact of recent cuts in federal transfer payments on provincial health care programs and offer seven suggestions to policymakers trying to accommodate these reductions. (1) Go slowly: public health care spending is no longer rising and few provinces have the necessary systems in place to manage major reductions. (2) Target reductions, rewarding quality and efficiency instead of making ...

  7. Canadian petroleum history bibliography

    Energy Technology Data Exchange (ETDEWEB)

    Cass, D.

    2003-09-27

    The Petroleum History Bibliography includes a list of more than 2,000 publications that record the history of the Canadian petroleum industry. The list includes books, theses, films, audio tapes, published articles, company histories, biographies, autobiographies, fiction, poetry, humour, and an author index. It was created over a period of several years to help with projects at the Petroleum History Society. It is an ongoing piece of work, and as such, invites comments and additions.

  8. Tuberculosis in Aboriginal Canadians

    Directory of Open Access Journals (Sweden)

    Vernon H Hoeppner

    2000-01-01

    Full Text Available Endemic tuberculosis (TB was almost certainly present in Canadian aboriginal people (aboriginal Canadians denotes status Indians, Inuit, nonstatus Indians and metis as reported by Statistics Canada before the Old World traders arrived. However, the social changes that resulted from contact with these traders created the conditions that converted endemic TB into epidemic TB. The incidence of TB varied inversely with the time interval from this cultural collision, which began on the east coast in the 16th century and ended in the Northern Territories in the 20th century. This relatively recent epidemic explains why the disease is more frequent in aboriginal children than in Canadian-born nonaboriginal people. Treatment plans must account for the socioeconomic conditions and cultural characteristics of the aboriginal people, especially healing models and language. Prevention includes bacillus Calmette-Guerin vaccination and chemoprophylaxis, and must account for community conditions, such as rates of suicide, which have exceeded the rate of TB. The control of TB requires a centralized program with specifically directed funding. It must include a program that works in partnership with aboriginal communities.

  9. Canadian small wind market

    International Nuclear Information System (INIS)

    Moorhouse, E.

    2010-01-01

    This PowerPoint presentation discussed initiatives and strategies adopted by the Canadian Wind Energy Association (CanWEA) to support the development of Canada's small wind market. The general public has shown a significant interest in small wind projects of 300 kW. Studies have demonstrated that familiarity and comfort with small wind projects can help to ensure the successful implementation of larger wind projects. Small wind markets include residential, farming and commercial, and remote community applications. The results of CanWEA market survey show that the small wind market grew by 78 percent in 2008 over 2007, and again in 2009 by 32 percent over 2008. The average turbine size is 1 kW. A total of 11,000 turbines were purchased in 2007 and 2008. Global small wind market growth increased by 110 percent in 2008, and the average turbine size was 2.4 kW. Eighty-seven percent of the turbines made by Canadian mid-size wind turbine manufacturers are exported, and there is now a significant risk that Canada will lose its competitive advantage in small wind manufacturing as financial incentives have not been implemented. American and Canadian-based small wind manufacturers were listed, and small wind policies were reviewed. The presentation concluded with a set of recommendations for future incentives, educational programs and legislation. tabs., figs.

  10. Canadian ethane market overview

    Energy Technology Data Exchange (ETDEWEB)

    Stauft, T. [TransCanada Midstream, Calgary, AB (Canada)

    1999-07-01

    A review of the Canadian petrochemical industry, the supply and demand for ethane, and the longer-term outlook for ethane are presented. Recent projections of natural gas production by the National Energy Board are examined, along with the impact on ethane supply and demand by Alliance. It is suggested that reduced gas will flow past Cochrane and Empress, Alberta ethane and gas prices will increase relative to US Gulf Coast prices, and since expansion is based on ethane demand, the combined influence of these factors will be to delay the construction of new extraction capacity. Present capacity is considered sufficient to produce ethane for the current round of petrochemical plant expansions. Excess supplies will exist for the next few years, and Alberta ethane prices are likely to strengthen due to the tight supply/demand balance. The combination of the impact of the Alliance Pipeline project and the ultimate potential of the Western Canadian Sedimentary Basin are the major uncertainties. On the plus side, both the US and Canadian regulatory agencies appear to be moving away from regulating ethane, and towards allowing a competitive market to develop.

  11. Canadian ethane market overview

    International Nuclear Information System (INIS)

    Stauft, T.

    1999-01-01

    A review of the Canadian petrochemical industry, the supply and demand for ethane, and the longer-term outlook for ethane are presented. Recent projections of natural gas production by the National Energy Board are examined, along with the impact on ethane supply and demand by Alliance. It is suggested that reduced gas will flow past Cochrane and Empress, Alberta ethane and gas prices will increase relative to US Gulf Coast prices, and since expansion is based on ethane demand, the combined influence of these factors will be to delay the construction of new extraction capacity. Present capacity is considered sufficient to produce ethane for the current round of petrochemical plant expansions. Excess supplies will exist for the next few years, and Alberta ethane prices are likely to strengthen due to the tight supply/demand balance. The combination of the impact of the Alliance Pipeline project and the ultimate potential of the Western Canadian Sedimentary Basin are the major uncertainties. On the plus side, both the US and Canadian regulatory agencies appear to be moving away from regulating ethane, and towards allowing a competitive market to develop

  12. Utilisation of transparent synthetic soil surrogates in geotechnical physical models: A review

    Directory of Open Access Journals (Sweden)

    Abideen Adekunle Ganiyu

    2016-08-01

    Full Text Available Efforts to obtain non-intrusive measurement of deformations and spatial flow within soil mass prior to the advent of transparent soils have perceptible limitations. The transparent soil is a two-phase medium composed of both the synthetic aggregate and fluid components of identical refractive indices aiming at attaining transparency of the resulting soil. The transparency facilitates real life visualisation of soil continuum in physical models. When applied in conjunction with advanced photogrammetry and image processing techniques, transparent soils enable the quantification of the spatial deformation, displacement and multi-phase flow in physical model tests. Transparent synthetic soils have been successfully employed in geotechnical model tests as soil surrogates based on the testing results of their geotechnical properties which replicate those of natural soils. This paper presents a review on transparent synthetic soils and their numerous applications in geotechnical physical models. The properties of the aggregate materials are outlined and the features of the various transparent clays and sands available in the literature are described. The merits of transparent soil are highlighted and the need to amplify its application in geotechnical physical model researches is emphasised. This paper will serve as a concise compendium on the subject of transparent soils for future researchers in this field.

  13. Assessing geotechnical centrifuge modelling in addressing variably saturated flow in soil and fractured rock.

    Science.gov (United States)

    Jones, Brendon R; Brouwers, Luke B; Van Tonder, Warren D; Dippenaar, Matthys A

    2017-05-01

    The vadose zone typically comprises soil underlain by fractured rock. Often, surface water and groundwater parameters are readily available, but variably saturated flow through soil and rock are oversimplified or estimated as input for hydrological models. In this paper, a series of geotechnical centrifuge experiments are conducted to contribute to the knowledge gaps in: (i) variably saturated flow and dispersion in soil and (ii) variably saturated flow in discrete vertical and horizontal fractures. Findings from the research show that the hydraulic gradient, and not the hydraulic conductivity, is scaled for seepage flow in the geotechnical centrifuge. Furthermore, geotechnical centrifuge modelling has been proven as a viable experimental tool for the modelling of hydrodynamic dispersion as well as the replication of similar flow mechanisms for unsaturated fracture flow, as previously observed in literature. Despite the imminent challenges of modelling variable saturation in the vadose zone, the geotechnical centrifuge offers a powerful experimental tool to physically model and observe variably saturated flow. This can be used to give valuable insight into mechanisms associated with solid-fluid interaction problems under these conditions. Findings from future research can be used to validate current numerical modelling techniques and address the subsequent influence on aquifer recharge and vulnerability, contaminant transport, waste disposal, dam construction, slope stability and seepage into subsurface excavations.

  14. Environments for Fostering Effective Critical Thinking in Geotechnical Engineering Education (Geo-EFFECTs)

    Science.gov (United States)

    Pierce, Charles E.; Gassman, Sarah L.; Huffman, Jeffrey T.

    2013-01-01

    This paper describes the development, implementation, and assessment of instructional materials for geotechnical engineering concepts using the Environments for Fostering Effective Critical Thinking (EFFECTs) pedagogical framework. The central learning goals of engineering EFFECTs are to (i) improve the understanding and retention of a specific…

  15. Pore water pressures and slope stability: a joint geophysical and geotechnical analysis

    International Nuclear Information System (INIS)

    Perrone, Angela; Lapenna, Vincenzo; Vassallo, Roberto; Maio, Caterina Di

    2008-01-01

    Slope stability is influenced by many factors, among which are subsoil structure and pore water pressure distribution. This paper presents a multi-disciplinary approach for the determination of these two factors and for the construction of a reliable model of the subsoil for the slope stability analysis. The case of a clay slope located in the Southern Apennines (Italy) is presented and discussed. Geophysical imaging (2D electrical resistivity tomography—ERT), in situ geotechnical monitoring (measurements of pore pressures and horizontal displacements) and laboratory geotechnical tests (for the determination of index, hydraulic and mechanical properties of soils) have been carried out. The comparison and the integration between ERT images and direct observations of the material extracted from boreholes have allowed us to reconstruct the subsoil stratigraphy with continuity. Thus, a reliable 2D model of the subsoil has been obtained, with well-defined boundaries on which it has been possible to apply appropriate hydraulic conditions. This geotechnical model has been used for studying the pore water pressure distribution and for analysing how the hydraulic boundary conditions—among which rain events—influence the slope stability. Our findings demonstrate the powerful skill of the ERT, if integrated with borehole data, to generate an accurate subsoil model. It is also evident that geophysical imaging can be a source of ambiguity and misjudgement if interpreted without a comparison with geotechnical data

  16. Preliminary geotechnical properties of deepsea sediments from the Central Indian Basin

    Digital Repository Service at National Institute of Oceanography (India)

    Khadge, N.H.

    Geotechnical properties of the Plio-Pleistocene sediments from nodule bearing area in the Central Indian Basin have been studied to know shear strength and water content variation with depth. It reveals that surface sediments have low (less than 1 k...

  17. Changes in geotechnical properties of sediments from the Central Indian Basin induced by disturbance experiment

    Digital Repository Service at National Institute of Oceanography (India)

    Khadge, N.H.

    -grained sediments from the study area showed change in geotechnical properties induced due to the disturbance. Marginal increase in natural water content and significant reduction in undrained shear strength at the 0-5 cm sediment layer of cores from the tow zone...

  18. P-wave velocity test for assessment of geotechnical properties of ...

    Indian Academy of Sciences (India)

    ... modulus of elasticity, water absorption and effective porosity, slake durability index, saturated and dry density of rock using -wave velocity (p). For this purpose geotechnical properties of nine different rock types were determined in the laboratory and their mineralogical composition examined using thin section analysis.

  19. P-wave velocity test for assessment of geotechnical properties of ...

    Indian Academy of Sciences (India)

    Administrator

    P-wave velocity test, a non-destructive and easy method to apply in both field ... ditions, has increasingly been conducted to determine the geotechnical properties of rock materials. .... nent elements in the study area and rich in molds of reed ... Kocabas crystals 5–10 μm in size with no internal architecture ... organic matter.

  20. Dictionaries of Canadian English

    Directory of Open Access Journals (Sweden)

    John Considine

    2011-10-01

    Full Text Available

    Abstract: The lexicographical record of English in Canada began with wordlists of the late eighteenth, nineteenth, and early twentieth centuries. From the beginning of the twentieth century onwards, the general vocabulary of English in Canada has been represented in bilingual and monolingual dictionaries, often adapted from American or British dictionaries. In the 1950s, several important projects were initiated, resulting in the publication of general dictionaries of English in Canada, and of dictionaries of Canadianisms and of the vocabulary of particular regions of Can-ada. This article gives an overview of these dictionaries and of their reception, contextualizing them in the larger picture of the lexicography of Canada's other official language, French, and of a number of its non-official languages. It concludes by looking at the future of English-language lexicography in Canada, and by observing that although it has, at its best, reached a high degree of sophistication, there are still major opportunities waiting to be taken.

    Keywords: DICTIONARY, LEXICOGRAPHY, CANADIAN ENGLISH, CANADIANISMS, NATIONAL DICTIONARIES, CANADIAN FRENCH, CANADIAN FIRST NATIONS LAN-GUAGES, BILINGUAL DICTIONARIES, REGIONAL DICTIONARIES, UNFINISHED DICTIONARY PROJECTS

    Opsomming: Woordeboeke van Kanadese Engels. Die leksikografiese optekening van Engels in Kanada begin met woordelyste van die laat agtiende, neëntiende en vroeë twintigste eeue. Van die begin van die twintigste eeu af en verder, is die algemene woordeskat van Engels weergegee in tweetalige en eentalige woordeboeke, dikwels met wysiginge ontleen aan Ameri-kaanse en Britse woordeboeke. In die 1950's is verskeie belangrike projekte onderneem wat gelei het tot die publikasie van algemene woordeboeke van Engels in Kanada, en van woordeboeke van Kanadeïsmes en van die woordeskat van bepaalde streke van Kanada. Hierdie artikel gee 'n oorsig van dié woordeboeke, en van hul ontvangs, deur

  1. Mendel conference

    CERN Document Server

    2015-01-01

    This book is a collection of selected accepted papers of Mendel conference that has been held in Brno, Czech Republic in June 2015. The book contents three chapters which represent recent advances in soft computing including intelligent image processing and bio-inspired robotics.: Chapter 1: Evolutionary Computing, and Swarm intelligence, Chapter 2: Neural Networks, Self-organization, and Machine Learning, and Chapter3: Intelligent Image Processing, and Bio-inspired Robotics. The Mendel conference was established in 1995, and it carries the name of the scientist and Augustinian priest Gregor J. Mendel who discovered the famous Laws of Heredity. In 2015 we are commemorating 150 years since Mendel's lectures, which he presented in Brno on February and March 1865. The main aim of the conference was to create a periodical possibility for students, academics and researchers to exchange their ideas and novel research methods.  .

  2. A Machine Learning Approach to Estimate Riverbank Geotechnical Parameters from Sediment Particle Size Data

    Science.gov (United States)

    Iwashita, Fabio; Brooks, Andrew; Spencer, John; Borombovits, Daniel; Curwen, Graeme; Olley, Jon

    2015-04-01

    Assessing bank stability using geotechnical models traditionally involves the laborious collection of data on the bank and floodplain stratigraphy, as well as in-situ geotechnical data for each sedimentary unit within a river bank. The application of geotechnical bank stability models are limited to those sites where extensive field data has been collected, where their ability to provide predictions of bank erosion at the reach scale are limited without a very extensive and expensive field data collection program. Some challenges in the construction and application of riverbank erosion and hydraulic numerical models are their one-dimensionality, steady-state requirements, lack of calibration data, and nonuniqueness. Also, numerical models commonly can be too rigid with respect to detecting unexpected features like the onset of trends, non-linear relations, or patterns restricted to sub-samples of a data set. These shortcomings create the need for an alternate modelling approach capable of using available data. The application of the Self-Organizing Maps (SOM) approach is well-suited to the analysis of noisy, sparse, nonlinear, multidimensional, and scale-dependent data. It is a type of unsupervised artificial neural network with hybrid competitive-cooperative learning. In this work we present a method that uses a database of geotechnical data collected at over 100 sites throughout Queensland State, Australia, to develop a modelling approach that enables geotechnical parameters (soil effective cohesion, friction angle, soil erodibility and critical stress) to be derived from sediment particle size data (PSD). The model framework and predicted values were evaluated using two methods, splitting the dataset into training and validation set, and through a Bootstrap approach. The basis of Bootstrap cross-validation is a leave-one-out strategy. This requires leaving one data value out of the training set while creating a new SOM to estimate that missing value based on the

  3. Berkeley Conference

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1986-10-15

    To a regular observer at annual international meetings, progress in particle physics from one year to the next sometimes might seem ponderously slow. But shift the timescale and the result is startling. Opening his summary of the 1986 International Conference on High Energy Physics, held in Berkeley, California, from 16-23 July, Steve Weinberg first recalled the 1966 Conference, also held in Berkeley. Then the preoccupations were current algebra, hadron resonances and the interpretation of scattering in terms of Regge poles, and the theory of weak interactions. Physics certainly has moved.

  4. Berkeley Conference

    International Nuclear Information System (INIS)

    Anon.

    1986-01-01

    To a regular observer at annual international meetings, progress in particle physics from one year to the next sometimes might seem ponderously slow. But shift the timescale and the result is startling. Opening his summary of the 1986 International Conference on High Energy Physics, held in Berkeley, California, from 16-23 July, Steve Weinberg first recalled the 1966 Conference, also held in Berkeley. Then the preoccupations were current algebra, hadron resonances and the interpretation of scattering in terms of Regge poles, and the theory of weak interactions. Physics certainly has moved

  5. Improving the efficiency of longwall face recoveries by managing the geotechnical threats

    Energy Technology Data Exchange (ETDEWEB)

    David Hill; Rob Thomas [Strata Engineering (Australia)

    2006-12-15

    The project objective was to develop credible industry guidelines for the specification of effective ground control strategies, so as to minimise the likely geotechnical threats relating to the safety, operational costs and production delays associated with the recovery and relocation of a longwall face. The project commenced with an industry survey of longwall relocation practice. The resulting database covers issues such as the geotechnical environment, support practices and ground control experiences, including any difficulties encountered. Fieldwork aimed at geotechnical characterisation covered a range of environments in NSW and Queensland, drawing also on existing data from a number of mines. Longwall take-off monitoring data was obtained from 24 face recoveries across all the major coalfields. The fieldwork identified a number of critical features of the geotechnical environment, support design and mining geometry that have a pronounced impact on ground control during take-off. A cantilever model of roof behaviour at the take-off point was developed and validated by the data collected. The roof cantilever acts to transfer load to the solid abutment, the primary support element. Four parameters were identified as the main geotechnical hazards, namely: low roof competency (ie weak roof); an adverse weighting environment; geological structure; and horizontal stress concentrations at the gate ends (generally the maingate). Four aspects of the geometry and process were seen to be particularly significant, in terms of their impact on roof stability and the success of the overall operation, namely: the ability to maintain powered support resistance during bolt-up and take-off; the direction in which the powered supports are removed; the impact of take-off chutes; and the speed of the powered support removal process.

  6. Conference proceedings

    African Journals Online (AJOL)

    ebutamanya

    2016-02-29

    Feb 29, 2016 ... In addition, there are persistent problems with leadership and planning, vaccine stock management, supply chain capacity and quality, provider-parent communication, and financial sustainability. The conference delegates agreed to move from talking to taking concrete actions around children's health, and ...

  7. Glasgow conference

    Energy Technology Data Exchange (ETDEWEB)

    Fraser, Gordon

    1994-10-15

    The biennial 'Rochester' International Conferences on High Energy Physics which tick the rhythm of high energy physics progress reflect the dominance of the 'Standard Model' - the picture of electroweak and quark/gluon interactions in a simple framework of six weaklyinteracting particles (leptons) and six quarks. Despite its limited intellectual appeal, after a decade of intense probing the Standard Model still refuses to budge.

  8. Conference summary

    International Nuclear Information System (INIS)

    Clark, D.J.

    1975-10-01

    A brief review is given of the main results presented at the International Conference on Heavy Ion Sources, October 27--30, 1975. The sections are as follows: highlights, general observations, fundamental processes in sources, positive ion sources, negative ion sources, beam formation and emittance measurements, stripping, accelerators and experiments, and future prospects

  9. Lisbon Conference

    International Nuclear Information System (INIS)

    Anon.

    1981-01-01

    Although no major physics discoveries were announced, the European Physical Society's International Conference on High Energy Physics, held in Lisbon from 9-15 July, was significant in that it showed the emerging pattern of physics for the 1980s

  10. Conference report

    African Journals Online (AJOL)

    Tamara Shefer

    Bloomberg Philanthropies. The conference theme “from research to implementation” emphasised the importance of connecting knowledge around violence with injury prevention, while stressing the need to address the multitude of transnational public health challenges. In speaking to this theme, the. Tampere Declaration ...

  11. Conference Planning.

    Science.gov (United States)

    Carter, Richard

    1982-01-01

    Presents an overview of the management planning technique known as Break Even Analysis and outlines its use as a tool in financial planning for organizations intending to conduct or sponsor a conference, seminar, or workshop. Three figures illustrating Break Even Analysis concepts and a Break Even Analysis worksheet are included. (JL)

  12. Conference proceedings

    African Journals Online (AJOL)

    abp

    2015-08-07

    Aug 7, 2015 ... Conference was organized in June 2-6, 2014 at the Yaoundé Mont Febe Hotel, in Cameroon. Under the theme«Practice .... while the implementation of family planning in African HIV programs will favor safe contraception ... equipment. The WHO-stepwise approach for the global strategy for the prevention ...

  13. Conference summaries

    International Nuclear Information System (INIS)

    1983-01-01

    The papers presented at this conference cover the fields of thermalhydraulics, nuclear plant design and operation, licensing, decontamination, restoration and dismantling of nuclear power facilities, services to the nuclear industry, new applications of nuclear technology, reactor physics and fuel cycles, accelerator-breeders, fusion research and lasers

  14. Canadian heavy water production

    International Nuclear Information System (INIS)

    Dahlinger, A.; Lockerby, W.E.; Rae, H.K.

    1977-01-01

    The paper reviews Canadian experience in the production of heavy water, presents a long-term supply projection, relates this projection to the anticipated long-term electrical energy demand, and highlights principal areas for further improvement that form the bulk of the Canadian R and D programme on heavy water processes. Six Canadian heavy water plants with a total design capacity of 4000Mg/a are in operation or under construction. All use the Girdler-Sulphide (GS) process, which is based on deuterium exchange between water and hydrogen sulphide. Early operating problems have been overcome and the plants have demonstrated annual capacity factors in excess of 70%, with short-term production rates equal to design rates. Areas for further improvement are: to increase production rates by optimizing the control of foaming to give both higher sieve tray efficiency and higher flow rates, to reduce the incapacity due to deposition of pyrite (FeS 2 ) and sulphur (between 5% and 10%), and to improve process control and optimization of operating conditions by the application of mathematical simulations of the detailed deuterium profile throughout each plant. Other processes being studied, which look potentially attractive are the hydrogen-water exchange and the hydrogen-amine exchange. Even if they become successful competitors to the GS process, the latter is likely to remain the dominant production method for the next 10-20 years. This programme, when related to the long-term electricity demand, indicates that heavy water supply and demand are in reasonable balance and that the Candu programme will not be inhibited because of shortages of this commodity. (author)

  15. The Canadian safeguards program

    International Nuclear Information System (INIS)

    Zarecki, C.W.; Smith, R.M.

    1981-12-01

    In support of the Treaty on the Non-Proliferation of Nuclear Weapons Canada provides technical support to the International Atomic Energy Agency for the development of safeguards relevant to Canadian designed and built nuclear facilities. Some details of this program are discussed, including the philosophy and development of CANDU safeguards systems; the unique equipment developed for these systems; the provision of technical experts; training programs; liaison with other technical organizations; research and development; implementation of safeguards systems at various nuclear facilities; and the anticipated future direction of the safeguards program

  16. Canadian photovoltaic industry directory

    International Nuclear Information System (INIS)

    1998-01-01

    This directory has been prepared to help potential photovoltaic (PV) customers identify Canadian-based companies who can meet their needs, and to help product manufacturers and distributors identify potential new clients and/or partners within the PV industry for new and improved technologies. To assist the reader, an information matrix is provided that identifies the product and service types offered by each firm and its primary clients served. A list of companies by province or territory is also included. The main section lists companies in alphabetical order. Information presented for each includes address, contact person, prime activity, geographic area served, languages in which services are offered, and a brief company profile

  17. On Realities of Canadian Multiculturalism

    Institute of Scientific and Technical Information of China (English)

    李梦辰

    2013-01-01

    Canada is a multicultural country which was mainly established by immigrants. Just because of that, Canadian govern⁃ment has carried out the policy of multiculturalism since1970s. However, it has encountered many problems such as policy con⁃flicts, national identity, democracy-inquiry and racial discrimination, etc. Hence the Canadian multiculturalism has been in a di⁃lemma.

  18. "Canadianizing" an American Communication Textbook.

    Science.gov (United States)

    Maclennan, Jennifer M.

    2000-01-01

    Presents a study on the process involved in the "Canadianization" of U.S. textbooks for the domestic market. Explores whether disciplinary values have been shaped by the United States in the field of communication. Focuses on the experience of developing the Canadian edition of the book "Public Speaking: Strategies for Success"…

  19. Engendering migrant health: Canadian perspectives

    National Research Council Canada - National Science Library

    Spitzer, Denise L

    2011-01-01

    ... these and other issues at the intersections of gender, immigration, and health in the lives of new Canadians. Situating their work within the context of Canadian policy and society, the contributors illuminate migrants' testimonies of struggle, resistance, and solidarity as they negotiate a place for themselves in a new country. Topics range fr...

  20. Canadian perspectives on food irradiation

    International Nuclear Information System (INIS)

    Kunstadt, P.

    1988-01-01

    Canada has been in the forefront of irradiation technology for some 30 years. Nearly 90 of the 140 irradiators used worldwide are Canadian-built, yet Canadian food processors have been very slow to use the technology. The food irradiation regulatory situation in Canada, the factors that influence it, and some significant non-regulatory developments are reviewed. (author)

  1. Proceedings of the international conference on maglev and linear drives

    International Nuclear Information System (INIS)

    Anon.

    1986-01-01

    This book contains papers presented at a conference on Maglev and linear drives. Topics covered include: Development of superconducting magnets for the Canadian electrodynamic Maglev vehicle; Power supply system to drive HSST - Expo '86; and Thrust and levitation force characteristics of linear synchronous motors

  2. Canadian geologic isolation program

    International Nuclear Information System (INIS)

    Dyne, P.J.

    1976-01-01

    The Canadian geologic isolation program is directed at examining the potential of (1) salt deposits and (2) hard rock as repositories for radioactive wastes. It was felt essential from the inception that alternative host rocks be evaluated over a fairly large geographical area. The studies on salt deposits to date are based on existing geological information and have identified the areas that show some potential and merit further study. The factors considered include depth, thickness and purity of the deposit, overlying aquifers, and the potential for gas and oil exploration as well as potash recovery. The studies on hard rock are restricted to plutonic igneous rocks in the Ontario part of the Canadian Shield. Because geological information on their nature and extent is sparse, the study is limited to bodies that are well exposed and for which information is available.for which information is available. Field studies in the next two seasons are aimed at mapping the fault and joint patterns and defining the geologic controls on their development. In 1977 and 1978, two or three of the more favorable sites will be mapped in greater detail, and an exploratory drilling program will be established to determine the extent of fracturing at depth and the hydrology of these fractures. Conceptual designs of mined repositories in hard rock are also being made with the hope of identifying, at an early stage in this program, special problems in hard-rock repositories that may require development and study

  3. Geotechnical zoning of urban foundations: Avilés case study (N Spain)

    Science.gov (United States)

    María Díaz-Díaz, Luis; Arias, Daniel; López-Fernández, Carlos; Pando, Luis

    2014-05-01

    The purpose of this paper is to carry out a geotechnical evaluation of the underground within an urban setting in relation to types of foundations, and particularly at expansion zones. The ultimate aim is to produce a foundation zonation map at the scale 1:10,000. Furthermore, a general methodology that way be extrapolated to other cities is proposed. This work focused on the city of Aviles like a case study; a medium-sized city which has significant industrial and port areas and singular equipment in its surroundings. This city is located in the Spanish north coast and spread out on both flanks of the Avilés stuary. This means that there are an important development of recent deposits that implies different geotechnical units with a highly variable behavior, generally poor. In contrast, the bedrock is more homogenous, formed by Permo-Triassic red clay and marl. Locally there are also outcrops of carbonates and conglomeratic Jurassic levels. Also, on the whole area is important to note the presence of heterogeneous anthropic deposits along the whole area as a consequence, mainly, of an intense industrial activity. Permo-Triassic clayey and marly materials imply special engineering issues in foundations as a consequence of their composition (likely weathering, presence of gypsum, low bearing capacity). Moreover, recent deposits (marine and alluvial origin) show different geotechnical behaviors depending on their geometry and grain size. Hence, many areas of the city are especially problematic when designing and implementing foundations. The methodology followed in this study consisted in elaborating a geological-geotechnical exhaustive survey of the urban underground on a scale of 1/10.000. Based on this, a multi criteria analysis of the identified geotechnical units was carried out taking into consideration all the lithological, geomorphological, hidrogeological and geotechnical aspects. Taken into account all of these criteria, a number of areas are defined based

  4. The Evolution of the Canadian Music Festival Movement as an Instrument of Musical Education.

    Science.gov (United States)

    Abbott, Eric Oscar

    The growth and development of the Canadian music festival movement were traced in this study. Primary sources were minutes of annual conferences of delegates from the various festivals in Canada (1936 to 1968), and minutes covering the beginnings of the festival movement from 1908 to 1925; secondary sources were the Secretary's Handbook and Digest…

  5. Laboratory assessment of the influence of the proportion of waste foundry sand on the geotechnical engineering properties of clayey soils

    CSIR Research Space (South Africa)

    Mgangira, Martin B

    2006-01-01

    Full Text Available Soil improvement can be achieved through mechanical stabilisation using industrial byproducts. Clayey soils were blended with waste foundry sand to examine its influence on the geotechnical engineering properties of the soils. The waste foundry sand...

  6. Geotechnical aspects of subsurface seabed disposal of high level radioactive wastes. Annual progress report, January--December 1977

    International Nuclear Information System (INIS)

    Silva, A.J.; Calnan, D.I.

    1978-05-01

    The status of the following major studies is reported: geotechnical properties of deep sea clays; experimental water migration studies;laboratory hole closure experiments; and in-site heat transfer experiments

  7. Geotechnical aspects of subsurface seabed disposal of high level radioactive wastes. Annual progress report, January--December 1977

    Energy Technology Data Exchange (ETDEWEB)

    Silva, A.J.; Calnan, D,I.

    1978-05-01

    The status of the following major studies is reported: geotechnical properties of deep sea clays; experimental water migration studies;laboratory hole closure experiments; and in-site heat transfer experiments. (LK)

  8. SIGEF Conference

    CERN Document Server

    Terceño-Gómez, Antonio; Ferrer-Comalat, Joan; Merigó-Lindahl, José; Linares-Mustarós, Salvador

    2015-01-01

    This book is a collection of selected papers presented at the SIGEF conference, held at the Faculty of Economics and Business of the University of Girona (Spain), 06-08 July, 2015. This edition of the conference has been presented with the slogan “Scientific methods for the treatment of uncertainty in social sciences”. There are different ways for dealing with uncertainty in management. The book focuses on soft computing theories and their role in assessing uncertainty in a complex world. It gives a comprehensive overview of quantitative management topics and discusses some of the most recent developments in all the areas of business and management in soft computing including Decision Making, Expert Systems and Forgotten Effects Theory, Forecasting Models, Fuzzy Logic and Fuzzy Sets, Modelling and Simulation Techniques, Neural Networks and Genetic Algorithms and Optimization and Control. The book might be of great interest for anyone working in the area of management and business economics and might be es...

  9. Proceedings of the 2. CDEN design conference

    International Nuclear Information System (INIS)

    Yellowley, I.; Gu, P.

    2005-01-01

    The Canadian Design Engineering Network (CDEN) promotes best practices in engineering design. This annual conference, which provided a forum to exchange ideas and experiences in engineering design, included 2 roundtable discussions on design and innovation in Canadian engineering schools, and design considerations in the accreditation of engineering programs. The conference also featured a student design competition. The main topics of the conference were design education, design for innovation and design practices. Within the topic of design education, the following themes were addressed: design curriculum; design projects and cases; emerging design education tools and techniques; evaluation metrics and techniques in design education; web-based education resources; and, multi-disciplinary design education. Within the topic of design for innovation, the following themes were addressed: technological innovation and creativity; product design; process design; adaptable design; platform and product architecture design; modular design; life cycle issues, reliability, serviceability and disposal/recycling; sustainable design and development; design for manufacturing, construction, services, and the environment; design for life, health and fitness; design methodologies, tools and techniques; distributed design activities and teams; and, web-based design and collaborative design and tools. Within the topic of design practice, the following themes were addressed: engineering, procurement and construction industry; design in auto manufacturing, aerospace industry and high-tech industry; engineering project management; design for sustainability and environmental practices; professional development in engineering design; and, current and future industrial practice trends. The conference featured 30 presentations, of which 5 have been catalogued separately for inclusion in this database. refs., tabs., figs

  10. Glasgow conference

    International Nuclear Information System (INIS)

    Fraser, Gordon

    1994-01-01

    The biennial 'Rochester' International Conferences on High Energy Physics which tick the rhythm of high energy physics progress reflect the dominance of the 'Standard Model' - the picture of electroweak and quark/gluon interactions in a simple framework of six weaklyinteracting particles (leptons) and six quarks. Despite its limited intellectual appeal, after a decade of intense probing the Standard Model still refuses to budge

  11. Washington Conference

    International Nuclear Information System (INIS)

    Anon.

    1981-01-01

    The 1981 Particle Accelerator Conference was held in Washington from 11-13 March. It was the ninth in the series of meetings organized in the USA which differ from the 'International' meetings in their coverage of the full range of accelerator engineering and technology, including applications outside e field of high energy physics. The Conference took place under the cloud of further budget cuts for Fiscal Year 1982 in the USA which the Department of Energy has applied in line with the financial policy of the new administration. Coming on top of many years of budget trimming which have reduced the number of high energy physics Laboratories funded by the DOE to three (Brookhaven, Fermilab, Stanford - Cornell is funded by the National Science Foundation) and reduced the exploitation of these Laboratories to less than half of their potential, the new cuts did not exactly help to boost morale. Nevertheless, the huge amount of tailed work in accelerator physics and technology which was presented at the Conference showed how alive the field is

  12. Geologic and Geotechnical contributions to the Lagoa da Rabicha and Cachoeira mines projects, Lagoa Real, State of Bahia, Brazil

    International Nuclear Information System (INIS)

    Tognon, A.A.; Costanzo Junior, J.; Ojima, L.M.; Oliveira Braga, T. de; Mueller, M.

    1984-01-01

    The procedures and systematics involved in obtaining basic geologic-geotechnical, geomechanical and hydrogeotechnical parameters to serve as an aid in the planning of mining activities for the Lagoa da Rabicha and Cachoeira deposists, located in the Lagoa Real uranium District, are presented and discussed. These deposits occur in the Caetite massif, composed mainly of Gneissic lithologies. The studies were performed in order to provide the essential elements for an initial Geologic-Geotechnical characterization of the massifs. (D.J.M.) [pt

  13. Seismic refraction technique aplications in the geotechnical characterization of the Cachoeira deposit massif, Caetite, State of Bahia, Brazil

    International Nuclear Information System (INIS)

    Malagutti Filho, W.; Oliveira Braga, T. de.

    1984-01-01

    Geophysical surveys throught the Cachoeira Uranium deposit massif were carried out with the purpose of assisting in the geotechnical characterization for the implantation of the Mining-Industrial Complex projects on the Lagoa Real uranium deposits, Caetite municipality, state of Bahia, Brazil. This study discusses the methodology utilized in the geophysical surveys and their results as well as their applications to the geotechnical characterization as a whole. (D.J.M.) [pt

  14. Towards a greener world : hydrogen and fuel cells 2004 conference and trade show. Conference proceedings

    International Nuclear Information System (INIS)

    2004-01-01

    Fuel Cells Canada and the Canadian Hydrogen Association hosted the Hydrogen and Fuel Cells 2004 Conference and Tradeshow in Toronto, Ontario, Canada on September 25-28, 2004. Industry leaders from around the world showcased the latest developments in fuel cell and hydrogen technology, and shared research breakthroughs. The conference focussed on many aspects of hydrogen and fuel cell technology, specifically: hydrogen technology progress, including storage, infrastructure and production; fuel cells, including quality, cost and applications; economics and policy, including government and industry strategies; fuel cell demonstrations, including transportation, micro-fuel cells, and portable power; and, impact on climate change, including health and the Kyoto Accord

  15. Canadian attitudes to nuclear power

    International Nuclear Information System (INIS)

    Davies, J.E.O.

    1977-01-01

    In the past ten years, public interest in nuclear power and its relationship to the environment has grown. Although most Canadians have accepted nuclear power as a means of generating electricity, there is significant opposition to its use. This opposition has effectively forced the Canadian nuclear industry to modify its behaviour to the public in the face of growing concern over the safety of nuclear power and related matters. The paper reviews Canadian experience concerning public acceptance of nuclear power, with special reference to the public information activities of the Canadian nuclear industry. Experience has shown the need for scientific social data that will permit the nuclear industry to involve the public in a rational examination of its concern about nuclear power. The Canadian Nuclear Association sponsored such studies in 1976 and the findings are discussed. They consisted of a national assessment of public attitudes, two regional studies and a study of Canadian policy-makers' views on nuclear energy. The social data obtained were of a base-line nature describing Canadian perceptions of and attitudes to nuclear power at that time. This research established that Canadian levels of knowledge about nuclear power are very low and that there are marked regional differences. Only 56% of the population have the minimum knowledge required to indicate that they know that nuclear power can be used to generate electricity. Nevertheless, 21% of informed Canadians oppose nuclear power primarily on the grounds that it is not safe. Radiation and waste management are seen to be major disadvantages. In perspective, Canadians are more concerned with inflation than with the energy supply. About half of all Canadians see the question of energy supplies as a future problem (within five years), not a present one. A more important aspect of energy is seen by the majority of Canadians to be some form of energy independence. The use of data from these studies is no easy

  16. Development of excavation technologies at the Canadian underground research laboratory

    International Nuclear Information System (INIS)

    Kuzyk, Gregory W.; Martino, Jason B.

    2008-01-01

    Several countries, Canada being among them, are developing concepts for disposal of used fuel from power generating nuclear reactors. As in underground mining operations, the disposal facilities will require excavation of many kilometres of shafts and tunnels through the host rock mass. The need to maintain the stability of excavations and safety of workers will be of paramount importance. Also, excavations required for many radioactive waste repositories will ultimately need to be backfilled and sealed to maintain stability and minimize any potential for migration of radionuclides, should they escape their disposal containers. The method used to excavate the tunnels and shafts, and the rock damage that occurs due to excavation, will greatly affect the performance characteristics of repository sealing systems. The underground rock mechanics and geotechnical engineering work performed at the Canadian Underground Research Laboratory (URL) has led to the development of excavation technologies that reduce rock damage in subsurface excavations. This paper discusses the excavation methods used to construct the URL and their application in planning for the construction of similar underground laboratories and repositories for radioactive wastes. (author)

  17. Canadian beef quality audit.

    Science.gov (United States)

    Van Donkersgoed, J; Jewison, G; Mann, M; Cherry, B; Altwasser, B; Lower, R; Wiggins, K; Dejonge, R; Thorlakson, B; Moss, E; Mills, C; Grogan, H

    1997-01-01

    A study was conducted in 4 Canadian processing plants in 1995-96 to determine the prevalence of quality defects in Canadian cattle. One percent of the annual number of cattle processed in Canada were evaluated on the processing floor and 0.1% were graded in the cooler. Brands were observed on 37% and multiple brands on 6% of the cattle. Forty percent of the cattle had horns, 20% of which were scurs, 33% were stubs, 10% were tipped, and 37% were full length. Tag (mud and manure on the hide) was observed on 34% of the cattle. Bruises were found on 78% of the carcasses, 81% of which were minor in severity. Fifteen percent of the bruises were located on the round, 29% on the loin, 40% on the rib, 16% on the chuck, and 0.02% on the brisket. Grubs were observed in 0.02% of the steers, and injection sites were observed in 1.3% of whole hanging carcasses. Seventy percent of the livers were passed for human food and 14% for pet food; 16% were condemned. Approximately 71% of the liver condemnations were due to liver abscesses. Four percent of the heads, 6% of the tongues, and 0.2% of whole carcasses were condemned. The pregnancy rate in female cattle was approximately 6.7%. The average hot carcass weight was 357 kg (s = 40) in steers, 325 kg (s = 41) in heifers, 305 kg (s = 53) in cows, 388 kg (s = 62) in virgin bulls and 340 kg (s = 39) in mature bulls. The average ribeye area in all cattle was 84 cm2 (s = 12); range 29 cm2 to 128 cm2. Grade fat was highly variable and averaged 9 mm (s = 4) for steers and heifers, 6 mm (s = 6) for cows, 5 mm (s = 1) for virgin bulls, and 4 mm (s = 0.5) for mature bulls. The average lean meat yield was 59.7% in cattle (s = 3.4); range 39% to 67%. One percent of the carcasses were devoid of marbling, 1% were dark cutters, and 0.05% of the steer carcasses were staggy. Six percent of the carcasses had poor conformation, 3.7% were underfinished, and 0.7% were overfinished. Yellow fat was observed in 4% of the carcasses; 10% of carcasses were

  18. Nonparametric Monitoring for Geotechnical Structures Subject to Long-Term Environmental Change

    Directory of Open Access Journals (Sweden)

    Hae-Bum Yun

    2011-01-01

    Full Text Available A nonparametric, data-driven methodology of monitoring for geotechnical structures subject to long-term environmental change is discussed. Avoiding physical assumptions or excessive simplification of the monitored structures, the nonparametric monitoring methodology presented in this paper provides reliable performance-related information particularly when the collection of sensor data is limited. For the validation of the nonparametric methodology, a field case study was performed using a full-scale retaining wall, which had been monitored for three years using three tilt gauges. Using the very limited sensor data, it is demonstrated that important performance-related information, such as drainage performance and sensor damage, could be disentangled from significant daily, seasonal and multiyear environmental variations. Extensive literature review on recent developments of parametric and nonparametric data processing techniques for geotechnical applications is also presented.

  19. An overview of the geotechnical damage brought by the 2016 Kumamoto Earthquake, Japan

    Science.gov (United States)

    Hemanta Hazarika,; Takaji Kokusho,; Kayen, Robert E.; Dashti, Shideh; Yutaka Tanoue,; Shuuichi Kuroda and Kentaro Kuribayashi,; Daisuke Matsumoto,; Furuichi, Hideo

    2016-01-01

    The 2016 Kumamoto earthquake with a moment magnitude of 7.0 (Japanese intensity = 7) that struck on April 16 brought devastation in many areas of Kumamoto Prefecture and partly in Oita Prefecture in Kyushu Region, Japan. The earthquake succeeds a foreshock of magnitude 6.5 (Japanese intensity = 7) on April 14. The authors conducted two surveys on the devastated areas: one during April 16-17, and the other during May 11-14. This report summarizes the damage brought to geotechnical structures by the two consecutive earthquakes within a span of twenty-eight hours. This report highlights some of the observed damage and identifies reasons for such damage. The geotechnical challenges towards mitigation of losses from such earthquakes are also suggested.

  20. Geotechnical modeling of high-level nuclear waste disposal by rock melting

    International Nuclear Information System (INIS)

    Heuze, F.E.

    1981-12-01

    A new strategy has been developed for the geotechnical modeling of nuclear waste disposal by rock melting (DRM). Three seeparate tasks were performed to reach this objective: a review of the four scenarios which have been proposed for DRM, to date; an evaluation of computer-based numerical models which could be used to analyze the mechanical, thermal, and hydraulic processes involved in DRM; and a critical review of rock mass properties which are relevant to the design and safety of waste disposal by rock melting. It is concluded that several geotechnical aspects of DRM can be studied realistically with current state-of-the-art model capabilities and knowledge of material properties. The next step in the feasibility study of DRM should be a best-estimate calculation of the four cavity-melt and canister-burial concepts. These new analyses will indicate the most critical areas for subsequent research

  1. Quarry geotechnical report for the Weldon Spring Site Remedial Action Project, Weldon Spring, Missouri

    International Nuclear Information System (INIS)

    1990-11-01

    This report has been prepared for the United States Department of Energy's (DOE) Weldon Spring Site Remedial Action Project (WSSRAP) by the Project Management Contractor (PMC), which is MK-Ferguson Company (MK-Ferguson) with Jacobs Engineering Group (JEG) as its designated subcontractor. The Weldon Spring site (WSS) comprises the Weldon Spring quarry area and the Weldon Spring chemical plant and raffinate pit areas. This report presents the results of geotechnical investigations conducted during 1989--1990 at the proposed Weldon Spring quarry staging and water treatment facilities in the quarry area. The facilities are intended for treatment of water removed from the quarry area. An access road and a decontamination pad will be necessary for handling and transportation of bulk waste. Results of previous geotechnical investigations performed by other geoscience and environmental engineering firms in the quarry area, were reviewed, summarized and incorporated into this report. Well logging, stratigraphy data, piezometer data, elevations, and soil characteristics are also included

  2. Work-related injuries and fatalities in the geotechnical site works.

    Science.gov (United States)

    Akboğa Kale, Özge; Eskişar, Tuğba

    2018-05-19

    Geotechnical site works are comprehensive, and they constitute the first step of the construction process. This study performs data mining of geotechnical works and analyzes the database for the root causes of accidents. The Occupational Safety and Health Administration (OSHA) was chosen for the 1984-2013 time frame with 247 cases. Descriptive statistical analyses were performed to discuss variables such as the end use of the work, project type and cost, soil type and condition, type and degree of injury, cause and type of accident, unsafe acts, and occupation and union status of the victim. The results showed that these accidents have a high frequency of recurrence and have a high severity level (54.3% fatalities). In addition, a total of 838 violations were recorded with penalties reaching 5 million US dollars. This study emphasizes that project-specific countermeasures should be taken regarding the root causes of accidents, leading to vigorous strategies to develop safety measures.

  3. Review of geotechnical measurement techniques for a nuclear waste repository in bedded salt

    International Nuclear Information System (INIS)

    1979-12-01

    This report presents a description of geotechnical measurement techniques that can provide the data necessary for safe development - i.e., location, design, construction, operation, decommissioning and abandonment - of a radioactive waste repository in bedded salt. Geotechnical data obtained by a diversity of measurement techniques are required during all phases of respository evolution. The techniques discussed in this report are grouped in the following categories: geologic, geophysical and geodetic; rock mechanics; hydrologic, hydrogeologic and water quality; and thermal. The major contribution of the report is the presentation of extensive tables that provide a review of available measurement techniques for each of these categories. The techniques are also discussed in the text to the extent necessary to describe the measurements and associated instruments, and to evaluate the applicability or limitations of the method. More detailed discussions of thermal phenomena, creep laws and geophysical methods are contained in the appendices; references to detailed explanations of measurement techniques and instrumentation are inluded throughout the report

  4. Commercial Light Water Reactor Tritium Extraction Facility. Geotechnical Summary report (U)

    International Nuclear Information System (INIS)

    McHood, M.D.

    2000-09-01

    A geotechnical investigation program has been completed for the Commercial Light Water Reactor - Tritium Extraction Facility (CLWR-TEF) at the Savannah River Site (SRS). The program consisted of reviewing previous geotechnical and geologic data and reports, performing subsurface field exploration, field and laboratory testing, and geologic and engineering analyses. The purpose of this investigation was to characterize the subsurface conditions for the CLWR-TEF in terms of subsurface stratigraphy and engineering properties for design and to perform selected engineering analyses. The objectives of the evaluation were to establish site-specific geologic conditions, obtain representative engineering properties of the subsurface and potential fill materials, evaluate the lateral and vertical extent of any soft zones encountered, and perform engineering analyses for slope stability, bearing capacity and settlement, and liquefaction potential. In addition, provide general recommendations for construction and earthwork

  5. Geotechnical properties of sediments from North Pacific and Northern Bermuda Rise

    International Nuclear Information System (INIS)

    Silva, A.J.; Laine, E.P.; Lipkin, J.; Heath, G.R.; Akers, S.A.

    1980-01-01

    Studies of geotechnical properties for the Sub-seabed Disposal Program have been oriented toward sediment characterization related to effectiveness as a containment media and determination of detailed engineering behavior. Consolidation tests of the deeper samples in the North Pacific clays indicate that the sediment column is normally consolidated. The in-situ coefficient of permeability (k) within the cored depth of 25 meters is relatively constant at 10 -7 cm/sec. Consolidated undrained (CIU) triaxial tests indicate stress-strain properties characteristic of saturated clays with effective angles of friction of 35 0 for smectite and 31 0 for illite. These results are being used in computer modeling efforts. Some general geotechnical property data from the Bermuda Rise are also discussed

  6. Review of geotechnical measurement techniques for a nuclear waste repository in bedded salt

    Energy Technology Data Exchange (ETDEWEB)

    1979-12-01

    This report presents a description of geotechnical measurement techniques that can provide the data necessary for safe development - i.e., location, design, construction, operation, decommissioning and abandonment - of a radioactive waste repository in bedded salt. Geotechnical data obtained by a diversity of measurement techniques are required during all phases of respository evolution. The techniques discussed in this report are grouped in the following categories: geologic, geophysical and geodetic; rock mechanics; hydrologic, hydrogeologic and water quality; and thermal. The major contribution of the report is the presentation of extensive tables that provide a review of available measurement techniques for each of these categories. The techniques are also discussed in the text to the extent necessary to describe the measurements and associated instruments, and to evaluate the applicability or limitations of the method. More detailed discussions of thermal phenomena, creep laws and geophysical methods are contained in the appendices; references to detailed explanations of measurement techniques and instrumentation are inluded throughout the report.

  7. The Geotechnical Board National Research Council. [Annual] activities report, March 1, 1991--June 30, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Smeallie, P.H.

    1993-08-11

    This report covers the activities of the Geotechnical Board and its two national committees, the US National Committee for Rock Mechanics (USNC/RM) and the US National Committee on Tunneling Technology (USNC/TT), for the period from March 1, 1991 to June 30, 1992. The report covers a 16-month period, through June of this year, to bring the reporting period in line with the National Research Council`s (NRC) fiscal year. Subsequent reports will cover the 12-month period July 1--June 30, unless individual contracts require otherwise. A description of the Geotechnical Board and its committees within the context of the National Academy of Sciences/National Research Council, as well as lists of current members of the board and national committees can be found in Attachment A.

  8. Need of geotechnical investigations for civil design of Nuclear Fuel Cycle Facilities

    International Nuclear Information System (INIS)

    Sharma, Sudin; Bhalerao, Sandip; Subramanyam, P.; Bhargava, Kapilesh; Agarwal, Kailash; Rao, D.A.S.; Roy, Amitava; Basu, S.

    2015-01-01

    An adequate assessment of the site geologic and geotechnical conditions is one of the most important aspects in safety evaluation of a Nuclear Fuel Cycle Facility (NFCF). Evaluation of safety of either a new or an existing NFCF requires, among other things, that its founding strata has been adequately examined, explored, and investigated so that it is as fully understood as possible. Foundation explorations should be directed towards obtaining only such information as may be important to an evaluation of Safety of the NFCF Civil structures of NFCF generally impose heavy loads on the foundation systems. Safe design of foundation aims at providing sound foundation systems for the structures so that they can fulfil their functional requirements towards the objective of nuclear safety. This paper aims at discussing various geotechnical tests and there importance in the safe evaluation and design of civil structures of NFCF in India. (author)

  9. NRC's geotechnical engineering research needs for the high-level waste repository program

    International Nuclear Information System (INIS)

    Gupta, D.C.; Philip, J.; Lorig, L.J.; Chowdhury, A.H.

    1992-01-01

    To develop the capability for independently assessing the US Department of Energy's (DOE's) geologic repository design within a limited time, the US Nuclear Regulatory Commission (NRC) staff needs to perform certain research well before receiving the license application. The NRC staff is using a number of factors to identify the areas that it needs to research. The staff assigns priorities to the needed research based on programmatic considerations and the significance of the work. In the geotechnical engineering field, the staff is conducting research in the following three areas: response of the repository to repeated strong ground motion, rock-mass sealing, and coupled thermo-hydro-mechanical interactions. In this paper, the NRC staff also presents the areas of additional research needed in the geotechnical engineering field

  10. The view of the geotechnical engineering on the radioactive waste disposal

    International Nuclear Information System (INIS)

    Komada, Hiroya

    2004-01-01

    The state of radioactive waste disposal produced by the nuclear fuel cycle facilities and the future problems of geotechnical engineering are stated. Concept of classification of radioactive waste and their disposal, the present state of operating waste and TRU waste in the low level radioactive waste and the high level radioactive waste are explained. On the future problems, evaluation of ground water flow, long period estimation of natural phenomena, mixed earth with bentonite as a buffer and cement materials are discussed. The geological disposal of radioactive waste, which kept them at more than 200 m underground, has two important different points from the general geotechnical engineering such as a system covered inhomogeneous large space of natural geological features and very long time (some million year) considered. (S.Y.)

  11. Canadian wind energy program

    Energy Technology Data Exchange (ETDEWEB)

    Templin, R J; South, P

    1976-01-01

    Several aspects of recent work at the National Research Council of Canada on the development of vertical-axis turbines have been reviewed. Most of this work, during the past year or more, has been in support of the design of a 200 kW unit now being built for experimental operation on the Magdelen Islands in the Gulf of St. Lawrence. Results of small and large scale aeroelastic wind tunnel model experiments have confirmed that very large scale vertical-axis wind turbines are feasible, especially if designed for normal operation at constant rotational speed. A computer model of a simple mixed power system has indicated that substantial cost savings may be possible by using wind energy in Canadian east coast regions. 4 refs., 11 figs., 1 tab.

  12. Effects of biochar amendment on geotechnical properties of landfill cover soil.

    Science.gov (United States)

    Reddy, Krishna R; Yaghoubi, Poupak; Yukselen-Aksoy, Yeliz

    2015-06-01

    Biochar is a carbon-rich product obtained when plant-based biomass is heated in a closed container with little or no available oxygen. Biochar-amended soil has the potential to serve as a landfill cover material that can oxidise methane emissions for two reasons: biochar amendment can increase the methane retention time and also enhance the biological activity that can promote the methanotrophic oxidation of methane. Hydraulic conductivity, compressibility and shear strength are the most important geotechnical properties that are required for the design of effective and stable landfill cover systems, but no studies have been reported on these properties for biochar-amended landfill cover soils. This article presents physicochemical and geotechnical properties of a biochar, a landfill cover soil and biochar-amended soils. Specifically, the effects of amending 5%, 10% and 20% biochar (of different particle sizes as produced, size-20 and size-40) to soil on its physicochemical properties, such as moisture content, organic content, specific gravity and pH, as well as geotechnical properties, such as hydraulic conductivity, compressibility and shear strength, were determined from laboratory testing. Soil or biochar samples were prepared by mixing them with 20% deionised water based on dry weight. Samples of soil amended with 5%, 10% and 20% biochar (w/w) as-is or of different select sizes, were also prepared at 20% initial moisture content. The results show that the hydraulic conductivity of the soil increases, compressibility of the soil decreases and shear strength of the soil increases with an increase in the biochar amendment, and with a decrease in biochar particle size. Overall, the study revealed that biochar-amended soils can possess excellent geotechnical properties to serve as stable landfill cover materials. © The Author(s) 2015.

  13. Evolution of geotechnical investigations in Italy after the Second World War

    Directory of Open Access Journals (Sweden)

    Ferruccio Cestari

    2014-12-01

    Full Text Available In this paper the writer presents the evolution of on site geothecnical investigations based on its own real-life experiences during more than fifty years of activity, both in Italy and in many sites abroad. The object of the paper is to give a panorama of methods and equipments development, to perform geotechnical site investigations, from a very poor initial practice to an European and Worldwide appreciated mastery of this activity

  14. Geotechnical properties of reinforced clayey soil using nylons carry’s bags by products

    OpenAIRE

    Salim Nahla; Al-Soudany Kawther; Jajjawi Nora

    2018-01-01

    All structures built on soft soil may experience uncontrollable settlement and critical bearing capacity. This may not meet the design requirements for the geotechnical engineer. Soil stabilization is the change of these undesirable properties in order to meet the requirements. Traditional methods of stabilizing or through in-situ ground improvement such as compaction or replacement technique is usually costly. Now a safe and economic disposal of industrial wastes and development of economica...

  15. From lab to field: Geotechnical properties for predicting embankment settlement on Lake Bonneville deposits

    International Nuclear Information System (INIS)

    Hoagland, K.C.; Sampaco, C.L.; Anderson, L.R.; Caliendo, J.A.; Rausher, L.; Keane, E.

    1994-01-01

    The results of a laboratory analysis, to determine geotechnical properties of lacustrine Lake Bonneville deposits, within the I-15 corridor of Salt Lake City, Utah, is presented. Laboratory vertical and horizontal consolidation coefficients are compared with those back-calculated from observed, field settlement data and linear relationships established. The results are used to select vertical and horizontal field coefficients and predict settlement rate of an existing embankment, scheduled for enlargement. 27 refs., 9 figs

  16. A review of geotechnical behavior of stabilized soils:Design and analysis considerations

    OpenAIRE

    Makusa, Gregory Paul

    2013-01-01

    Utilization of stabilization technology for improving the engineering properties of soft soils and sediments for structural backfill, such as land reclamation is increasing. Mass stabilization solidification provides a comprehensive technology for improving the geotechnical properties of the problematic soils for civil engineering applications; hence, solving the problem of scarcity of natural resources, meanwhile, providing a sustainable solution for management of contaminated sediments.In g...

  17. Historical Jeroným Mine in Čistá – Underground Experimental Geotechnical Laboratory

    Czech Academy of Sciences Publication Activity Database

    Kaláb, Zdeněk; Hrubešová, E.; Kořínek, R.; Žůrek, P.; Kukutsch, Radovan

    2012-01-01

    Roč. 21, č. 1 (2012), s. 54-65 ISSN 1211-0728 R&D Projects: GA ČR GA105/09/0089 Institutional research plan: CEZ:AV0Z3086906 Keywords : Jeroným Mine * geotechnical laboratory * monitoring Subject RIV: DC - Siesmology, Volcanology, Earth Structure http://www.ita-aites.cz/files/tunel/komplet/tunel_1_12.pdf

  18. Dictionaries of Canadian English | Considine | Lexikos

    African Journals Online (AJOL)

    ... its best, reached a high degree of sophistication, there are still major opportunities waiting to be taken. keywords: dictionary, lexicography, canadian english, canadianisms, national dictionaries, canadian french, canadian first nations lan-guages, bilingual dictionaries, regional dictionaries, unfinished diction-ary projects ...

  19. EFFECTS OF COMPACTIVE EFFORTS ON GEOTECHNICAL PROPERTIES OF SPENT ENGINE OIL CONTAMINATED LATERITE SOIL

    Directory of Open Access Journals (Sweden)

    OLUREMI, J. ROTIMI

    2017-03-01

    Full Text Available Investigation of the effects of compactive efforts and spent engine oil (SEO contamination on the geotechnical properties of lateritic soils was made. Contaminated specimens were prepared by mixing lateritic soil with up to 10 % SEO by dry weight of the soil in step concentration of 2 % and subjected to geotechnical tests. Results indicated a decrease in the fine content, decrease in liquid limit, maximum dry density (MDD and unconfined compressive strength (UCS with up to 10 % SEO content. No general trend was observed in the optimum moisture content (OMC with increasing SEO content. The MDD, OMC and UCS values increased with increase in the compactive effort. Regression analysis of the results showed that optimum moisture content, fine content and compactive effort significantly influence the soils UCS values. Analysis of variance showed that SEO and compactive effort has significant effect on the parameters with the exception in one case. The results of laboratory tests showed that geotechnical properties of the SEO contaminated soil were immensely impaired.

  20. On the geotechnical characterisation of the polluted submarine sediments from Taranto.

    Science.gov (United States)

    Vitone, Claudia; Federico, Antonio; Puzrin, Alexander M; Ploetze, Michael; Carrassi, Elettra; Todaro, Francesco

    2016-07-01

    This paper reports the results of the first geomechanical laboratory experiments carried out on the polluted submarine clayey sediments of the Mar Piccolo in Taranto (South of Italy). The study had to face with extreme difficulties for the very soft consistency of the sediments and the contaminants. The mineralogy, composition and physical properties of the sediments were analysed, along with their compression and shearing behaviour. The investigation involved sediments up to about 20 m below the seafloor, along three vertical profiles in the most polluted area of the Mar Piccolo, facing the Italian Navy Arsenal. The experimental results were used to derive a preliminary geotechnical model of the site, necessary for the selection and design of the most sustainable in situ mitigation solutions. Moreover, the experimental data reveal that the clayey sediments of the most polluted top layer do not follow the classical geotechnical correlations for normally consolidated deposits. This seems to open interesting perspectives about the effects of pollutants on the geotechnical behaviour of the investigated sediments.

  1. Geotechnical engineering considerations in the NRC's review of uranium mill tailings remedial action plans

    International Nuclear Information System (INIS)

    Gillen, D.M.

    1985-01-01

    To reduce potential health hazards associated with inactive uranium mill tailings sites, the Department of Energy (DOE) is presently investigating and implementing remedial actions at 24 sites in the Uranium Mill Tailings Remedial Action Program (UMTRAP). All remedial actions must be selected and performed with the concurrence of the Nuclear Regulatory Commission (NRC). This paper provides a discussion of geotechnical engineering considerations during the NRC's preconcurrence review of proposed remedial action plans. In order for the NRC staff to perform an adequate geotechnical engineering review, DOE documents must contain a presentation of the properties and stability of all in-situ and engineered soil and rock which may affect the ability of the remedial action plans to meet EPA standards for long-term stability and control. Site investigations, laboratory testing, and remedial action designs must be adequate in scope and technique to provide sufficient data for the NRC staff to independently evaluate static and dynamic stability, settlement, radon attenuation through the soil cover, durability of rock for erosion protection, and other geotechnical engineering factors

  2. CPT Profiling and Laboratory Data Correlations for Deriving of Selected Geotechnical Parameter

    Directory of Open Access Journals (Sweden)

    Bulko Roman

    2015-12-01

    Full Text Available Currently, can be seen a new trend in engineering geological survey, where laboratory analysis are replaced by in situ testing methods, which are more efficient and cost effective, and time saving too. A regular engineering geological survey cannot be provided by simple core drillings, macroscopic description (sometimes very subjective, and then geotechnical parameters are established based on indicative standardized values or archive values from previous geotechnical standards. The engineering geological survey is trustworthy if is composed of laboratory and in-situ testing supplemented by indirect methods of testing, [1]. The prevalence of rotary core drilling for obtaining laboratory soil samples from various depths (every 1 to 3 m, cannot be a more enhanced as continues evaluation of strata and properties e.g. by CPT Piezocone (every 1 cm. Core drillings survey generally uses small amounts of soil samples, but this is resulting to a lower representation of the subsoil and underestimation of parameters. Higher amounts of soil samples make laboratory testing time-consuming and results from this testing can be influenced by the storage and processing of the soil samples. Preference for geotechnical surveys with in situ testing is therefore a more suitable option. In situ testing using static and dynamic penetration tests can be used as a supplement or as a replacement for the (traditional methods of surveying.

  3. Direct Push supported geotechnical and hydrogeological characterisation of an active sinkhole area

    Science.gov (United States)

    Tippelt, Thomas; Vienken, Thomas; Kirsch, Reinhard; Dietrich, Peter; Werban, Ulrike

    2017-04-01

    Sinkholes represent a natural geologic hazard in areas where soluble layers are present in the subsurface. A detailed knowledge of the composition of the subsurface and its hydrogeological and geotechnical properties is essential for the understanding of sinkhole formation and propagation. This serves as base for risk evaluation and the development of an early warning system. However, site models often depend on data from drillings and surface geophysical surveys that in many cases cannot resolve the spatial distribution of relevant hydrogeological and geotechnical parameters sufficiently. Therefore, an active sinkhole area in Münsterdorf, Northern Germany, was investigated in detail using Direct Push technology, a minimally invasive sounding method. The obtained vertical high-resolution profiles of geotechnical and hydrogeological characteristics, in combination with Direct Push based sampling and surface geophysical measurements lead to a strong improvement of the geologic site model. The conceptual site model regarding sinkhole formation and propagation will then be tested based on the gathered data and, if necessary, adapted accordingly.

  4. Brief Overlook on the Occupational Accidents Occurring During the Geotechnical Site Works

    Science.gov (United States)

    Akboğa Kale, Özge; Eskişar, Tuğba

    2017-10-01

    The aim of this paper is to evaluate occupational accidents reported in geotechnical site works. Variables of the accidents are categorized as the year and month of accidents, the technical codes used for defining the scope of work trades, end use and project type and cost, nature and cause of accidents, occupation of the victims and finally the cause of fatality. As a result, it is seen that the majority of victims were construction laborers or in special trade constructors who were working on a new project or new additions to an existing project. The geotechnical phase of the projects was whether excavation, landfill, sewer-water treatment, pipeline construction, commercial building or road construction. As the outcomes of the study it is evaluated that excavation, trenching and installing pipe or pile driving were the main causes of the accidents while trench collapse, struck by a falling object / projectile and wall collapse were the main causes of fatality. Moreover, it is established that more than half of the fatalities were due to asphyxia followed by fracture. These findings show that accidents occurred in geotechnical works do not only have high frequency but also high severity. This study emphasizes project specific countermeasures should be taken regarding the nature, cost and importance of the project and the occupation variabilities working on the project.

  5. Meaning of geotechnical factors in regular decision of exploitation technology in stripe mines

    International Nuclear Information System (INIS)

    Jovanovski, Milorad; Gapkovski, Naum

    1997-01-01

    It is a well known fact that rational and safe designing of engineering activities is influenced in a first place from the states and the properties of the natural geological environment. This is especially emphasized in a coal mines, because the economical effects of the exploitation depends not only from the quality and the quantity of coal, but also from the geotechnical factors.The analyses which are presented here are obtained by the authors from investigations of coal mine 'Suvodol' - Bitola. The correlation between different parameters which are used directly in a stability analyses of slopes and the conditions for the protection from the groundwaters are shown. Thus the fact that it is essentially to define this parameters with appropriate methods of investigation on the field is emphasized. According to the authors experience, the data base of geological and geotechnical factors which are used in the designing of the technology of excavation is presented. At the end, the matrix of interaction between the parameters of groundwater condition, geological and geotechnical factors is presented. (Author)

  6. Introduction of Microbial Biopolymers in Soil Treatment for Future Environmentally-Friendly and Sustainable Geotechnical Engineering

    Directory of Open Access Journals (Sweden)

    Ilhan Chang

    2016-03-01

    Full Text Available Soil treatment and improvement is commonly performed in the field of geotechnical engineering. Methods and materials to achieve this such as soil stabilization and mixing with cementitious binders have been utilized in engineered soil applications since the beginning of human civilization. Demand for environment-friendly and sustainable alternatives is currently rising. Since cement, the most commonly applied and effective soil treatment material, is responsible for heavy greenhouse gas emissions, alternatives such as geosynthetics, chemical polymers, geopolymers, microbial induction, and biopolymers are being actively studied. This study provides an overall review of the recent applications of biopolymers in geotechnical engineering. Biopolymers are microbially induced polymers that are high-tensile, innocuous, and eco-friendly. Soil–biopolymer interactions and related soil strengthening mechanisms are discussed in the context of recent experimental and microscopic studies. In addition, the economic feasibility of biopolymer implementation in the field is analyzed in comparison to ordinary cement, from environmental perspectives. Findings from this study demonstrate that biopolymers have strong potential to replace cement as a soil treatment material within the context of environment-friendly construction and development. Moreover, continuing research is suggested to ensure performance in terms of practical implementation, reliability, and durability of in situ biopolymer applications for geotechnical engineering purposes.

  7. Waste Isolation Pilot Plant: Geotechnical field data and analysis report, July 1986-June 1987: Volume 2

    International Nuclear Information System (INIS)

    1988-03-01

    The Geotechnical Field Data and Analysis Report (GFDAR) is prepared to provide a timely assessment of the geotechnical status of the Waste Isolation Pilot Plant (WIPP). During the period of shaft sinking and construction of the principal underground access and experimental areas, reporting was on a quarterly basis. Because geotechnical responses of existing underground facilities have slowed to nearly steady-state and excavation of the waste storage panels will take place more slowly and over an extended period, reporting in the coming years will be on an annual cycle. Volume 2 constitutes the principal documentation and presentation of data and techniques used to acquire the data, the performance history of the instrumentation, and the complete set of data from each of the underground facilities. In addition, it presents the results of geologic logging, stratigraphic mapping, and mapping and evaluation of excavation-induced fractures. This volume has as its anticipated audience those Project personnel who need to perform data analyses beyond those provided in Volume 1, and external personnel who may choose to perform other analyses and evaluations for their own purposes. 2 refs., 368 figs., 27 tabs

  8. Determination of the geotechnical properties of mudrocks from geophysical logging of the Harwell boreholes

    International Nuclear Information System (INIS)

    Horseman, S.T.; McCann, D.M.; McEwen, T.J.; Brightman, M.A.

    1984-11-01

    The geotechnical properties of mainly argillaceous strata at depth in borehole HW3 at Harwell, Oxfordshire have been determined using a variety of borehole geophysical logging techniques. The aim of this work was to assess the usefulness of such techniques for the indirect measurement of the geotechnical properties of the rocks and the subsequent bearing that such knowledge would have on the design of a site investigation programme for the deep disposal of non heat emitting radioactive waste. The borehole was logged by Seismograph Services Ltd over the interval from 165 - 551 m., whilst open and mud filled. Seven different geophysical logs were run: caliper, formation density, neutron-neutron, natural-gamma, 3D velocity, spontaneous potential, single point resistance and 16''/64'' normal resistivity. The logs that were of any use in determining geotechnical properties were the neutron-neutron, the formation density and the sonic log. It is suggested that in these types of formation the sonic log, once calibrated for the particular circumstances, could be used to provide a useful downhole strength log. (author)

  9. Conference summaries

    International Nuclear Information System (INIS)

    Phillips, G.J.

    1985-01-01

    The 113 papers presented at this conference covered the areas of 1) fuel design, development and production; 2) nuclear plant safety; 3) nuclear instrumentation; 4) public and regulatory matters; 5) developments and opportunities in fusion; 6) fuel behaviour under normal operating conditions; 7) nuclear plant design and operations; 8) materials science and technology; 9) nuclear power issues; 10) fusion technology; 11) fuel behaviour under accident conditions; 12) large scale fuel channel replacement programs; 13) thermalhydraulics experimental studies; 14) reactor physics and analysis; 15) applications of accelerators; 16) fission product release and severe fuel damage under accident conditions; 17) thermalhydraulics modeling and assessments; 18) waste management and the environment; and 20) new reactor concepts

  10. The Canadian Dollar and the Dutch and Canadian Diseases

    Directory of Open Access Journals (Sweden)

    Serge Coulombe

    2013-10-01

    Full Text Available With the spectacular rise of the dollar, along with rising natural-resource prices during the first decade of the 21st century, Canadians heard a great deal about Dutch disease. Many politicians and pundits blamed the phenomenon — in which a country’s currency, inflated by rising commodity prices, renders manufacturing exports increasingly uncompetitive — for rising unemployment in the Canadian manufacturing industry. But a close look at what happened during that period reveals that the Dutch disease mechanism was only part of the story. The other part, and quantitatively the most important, is an affliction of an altogether different providence: Canadian disease. Canadian disease is the economic trouble that can be caused by Canada’s extraordinarily heavy reliance on the United States as a trading partner. As a consequence, a sudden depreciation of the U.S, dollar will deteriorate the competitiveness of Canadian manufacturing exporters. Such a phenomenon was at work during the “Great Appreciation” of the Canadian dollar between 2002 and 2008 — the largest such appreciation on record in this country. The depreciation of the U.S. dollar is a phenomenon that is independent of the resource boom and the resulting consequences on the Canadian economy cannot be endorsed to a Dutch disease. Almost 2/3 of the employment losses that are exchange rate related in the trade-exposed manufacturers in Canada during the 2002–2008 period could be attributed to the Canadian disease. The Canadian dollar is partly driven by commodity prices, and the appreciation of the Canadian dollar exerts a negative impact on manufacturing industries that are exposed to international competition. This phenomenon can be coined as a Dutch Affair. The Dutch Affair becomes a disease in the long run when the non-renewable resource is depleted and the manufacturing base is gone. New manufacturing activities might not reappear due to a variety of obstacles. In Canada

  11. Engendering migrant health: Canadian perspectives

    National Research Council Canada - National Science Library

    Spitzer, Denise L

    2011-01-01

    "Voluntary migrants to Canada are generally healthier than the average Canadian, but after ten years in the country they report poorer health and higher rates of chronic disease than those born here...

  12. Engendering migrant health: Canadian perspectives

    National Research Council Canada - National Science Library

    Spitzer, Denise L

    2011-01-01

    .... What contributes to this deterioration, and how can its effects be mitigated? Engendering Migrant Health brings together researchers from across Canada to address the intersections of gender, immigration, and health in the lives of new Canadians...

  13. The Canadian heavy water situation

    International Nuclear Information System (INIS)

    Dahlinger, A.

    The Canadian heavy water industry is analyzed. Supply and demand are predicted through 1985. Pricing is broken down into components. Backup R and D contributes greatly to process improvements. (E.C.B.)

  14. Canadian gas supply : an update

    International Nuclear Information System (INIS)

    Rochefort, T.

    1998-01-01

    An overview of the daily production from the Western Canada Sedimentary Basin (WCSB) from 1986 to 1997 was presented. This presentation also outlined Canadian production trends, Canadian reserves and resources, and supply challenges. Ultimate conventional marketable gas from the WCSB, the Scotian Shelf, the Beaufort Sea and Canada's Arctic region was estimated at 591 TCF. Issues regarding supply and demand of natural gas such as the impact of electricity restructuring on pricing, generation fuel mix, the capacity of the U.S. market to absorb Canadian heavy oil production, and the influence of the rate of technological advances on supply and demand were outlined. The overall conclusion confirmed the health and competitiveness of the Canadian upstream sector and expressed confidence that the WCSB can support rising levels of production to meet the expected continued market growth. tabs., figs

  15. NATO Conference

    CERN Document Server

    Lynn, W

    1975-01-01

    The contents of this volume involve selection, emendation and up-dating of papers presented at the NATO Conference "Mathe­ matical Analysis of Decision problems in Ecology" in Istanbul, Turkey, July 9-13, 1973. It was sponsored by the System Sciences Division of NATO directed by Dr. B. Bayraktar with local arrange­ ments administered by Dr. Ilhami Karayalcin, professor of the Department of Industrial Engineering at the Technical University of Istanbul. It was organized by A. Charnes, University professor across the University of Texas System, and Walter R.Lynn, Di­ rector of the School of Civil and Environmental Engineering at Cornell Unjversity. The objective of the conference was to bring together a group of leading researchers from the major sciences involved in eco­ logical problems and to present the current state of progress in research of a mathematical nature which might assist in the solu­ tion of these problems. Although their presentations are not herein recorded, the key­ note address of Dr....

  16. EGC Conferences

    CERN Document Server

    Ritschard, Gilbert; Pinaud, Bruno; Venturini, Gilles; Zighed, Djamel; Advances in Knowledge Discovery and Management

    This book is a collection of representative and novel works done in Data Mining, Knowledge Discovery, Clustering and Classification that were originally presented in French at the EGC'2012 Conference held in Bordeaux, France, on January 2012. This conference was the 12th edition of this event, which takes place each year and which is now successful and well-known in the French-speaking community. This community was structured in 2003 by the foundation of the French-speaking EGC society (EGC in French stands for ``Extraction et Gestion des Connaissances'' and means ``Knowledge Discovery and Management'', or KDM). This book is intended to be read by all researchers interested in these fields, including PhD or MSc students, and researchers from public or private laboratories. It concerns both theoretical and practical aspects of KDM. The book is structured in two parts called ``Knowledge Discovery and Data Mining'' and ``Classification and Feature Extraction or Selection''. The first part (6 chapters) deals with...

  17. Munich conference

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1988-10-15

    'The Standard Model has survived impact for another year', declared Don Perkins of Oxford, summarizing the 24th International Conference on High Energy Physics held in Munich from 4-10 August. 'But is this a triumph or a frustration for physics?' he added. The twin pillars of the Standard Model, the electroweak unification of electromagnetism and the weak nuclear force, and the field theory (quantum chromodynamics) of the quark-gluon interactions responsible for the strong nuclear force, have not trembled since the electroweak unification went to the textbooks in 1983, but from time to time small cracks have appeared which might have gone on to shake the theory severely, if not undermine it. Major conference summarizers have got used to singing the praises of the Standard Model, but this year at Munich even detailed examination failed to reveal any serious cracks, while looking deeper into physics even some anomalous results hinting at gaps in understanding have either gone away or have diminished credibility.

  18. Munich conference

    International Nuclear Information System (INIS)

    Anon.

    1988-01-01

    'The Standard Model has survived impact for another year', declared Don Perkins of Oxford, summarizing the 24th International Conference on High Energy Physics held in Munich from 4-10 August. 'But is this a triumph or a frustration for physics?' he added. The twin pillars of the Standard Model, the electroweak unification of electromagnetism and the weak nuclear force, and the field theory (quantum chromodynamics) of the quark-gluon interactions responsible for the strong nuclear force, have not trembled since the electroweak unification went to the textbooks in 1983, but from time to time small cracks have appeared which might have gone on to shake the theory severely, if not undermine it. Major conference summarizers have got used to singing the praises of the Standard Model, but this year at Munich even detailed examination failed to reveal any serious cracks, while looking deeper into physics even some anomalous results hinting at gaps in understanding have either gone away or have diminished credibility

  19. 6. CNS international conference on CANDU maintenance. Proceedings

    International Nuclear Information System (INIS)

    2003-01-01

    The 6th CNS International Conference on CANDU Maintenance took place in Toronto, Ontario on November 16-18, 2003. The theme for the conference was 'Maintenance for Life'. About 270 delegates attended the conference held by the Canadian Nuclear Society. The conference consisted of four parallel sessions, a pattern that continued throughout the conference. Papers were grouped under the following headings: Fuel Channels and End Fittings - Assessments; Fuel Channels and End Fittings - Inspections; Fuel Channels and End Fittings - Maintenance; Fuel Channels and End Fittings - Universal Delivery Machine; Water Upgrading; Performance and Plant Life Improvement; Steam Generator Life Management; Steam Generator Modifications; Steam Generators - Inspections; Steam Generators - Assessments; Maintenance Programs; Feeder Inspections; Feeder Assessment and Mitigation; Valve Maintenance; Instrumentation and Control; Inspection Technology; and Fuel Handling

  20. Proceedings of the WIN-Global 2008 conference

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    WiN-France hosted the 16. WIN-Global conference May 26-30, 2008, in Marseille, France. The conference was attended by over 150 delegates, representing 30 countries. Canadian participants, from many diverse backgrounds, attended the annual conference from AECL, Bruce Power, CNSC, NB Power and OPG. The theme: Maintaining Key Competencies, Arising Key Competencies for Nuclear Energy: A Challenge and Opportunity for Diversity Development, emphasized the challenges ahead in providing a skilled workforce for the nuclear renaissance, as new build projects and a vast number of retirements are expected around the world within the next 5 years. The conference addressed such questions as 'How will nuclear, attract, develop and retain staff?' A technical tour of Marcoule invited conference attendees to visit one of: Atalante, a high level nuclear chemistry laboratory; Phenix, a fast breeding research reactor; or AVM, a vitrification plant. A subsequent technical tour visited Cadarache providing the opportunity to view ITER, the international fusion research project.

  1. Proceedings of the WIN-Global 2008 conference

    International Nuclear Information System (INIS)

    2008-01-01

    WiN-France hosted the 16. WIN-Global conference May 26-30, 2008, in Marseille, France. The conference was attended by over 150 delegates, representing 30 countries. Canadian participants, from many diverse backgrounds, attended the annual conference from AECL, Bruce Power, CNSC, NB Power and OPG. The theme: Maintaining Key Competencies, Arising Key Competencies for Nuclear Energy: A Challenge and Opportunity for Diversity Development, emphasized the challenges ahead in providing a skilled workforce for the nuclear renaissance, as new build projects and a vast number of retirements are expected around the world within the next 5 years. The conference addressed such questions as 'How will nuclear, attract, develop and retain staff?' A technical tour of Marcoule invited conference attendees to visit one of: Atalante, a high level nuclear chemistry laboratory; Phenix, a fast breeding research reactor; or AVM, a vitrification plant. A subsequent technical tour visited Cadarache providing the opportunity to view ITER, the international fusion research project

  2. Canadian perspectives on food irradiation

    International Nuclear Information System (INIS)

    Kunstadt, P.

    1990-01-01

    Canada has been in the forefront of irradiation technology for over 30 years. Some 83 of the 147 irradiators used worldwide are Canadian-built, yet Canadian food processors have been very slow to use the technology. This paper is an update on the food irradiation regulatory situation in Canada and the factors that influence it. It also reviews some significant non-regulatory developments. (author)

  3. Conference Proceedings: Profit through technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    Advances in, and experiences with, horizontal well technology as one of the principal means of enhancing oil recovery were the themes that animated this international conference in Calgary, organized jointly by the Society of Petroleum Engineers (USA) and the Canadian Institute of Mining, Metallurgy and Petroleum. A total of 47 papers were selected for presentation by the Program Committee of the SPE on the basis of abstracts submitted by authors and these are included in this proceedings volume. Topics range from hydrajet fracturing through field implementation of geological steering techniques, sand control in open hole horizontal wells and improving water flooding efficiency, to steam assisted gravity drainage and chemical flooding through horizontal wells. A number of case histories are presented to illustrate technological advances. The case histories cover a wide range of applications and cover experiences from a number of countries. refs., tabs., figs.

  4. The Canadian initiative to host the international thermonuclear experimental reactor

    International Nuclear Information System (INIS)

    Dautovich, D.P.; James, R.A.

    1995-01-01

    At the time of the conference, the Canadian Nuclear Fuels Technology Project was making an innovative proposal whereby Ontario Hydro would provide space at its Darlington or Bruce sites as potential sites for the ITER project. An economic impact analysis, conducted by Ernst and Young, showed the potential economic benefits to Canada; other benefits could rather be considered to be scientific and technological benefits. A stable electrical supply grid, existing waste management infrastructure, an abundance of cheap power, and a skilled workforce, made Canada an attractive prospect. ITER, whatever its location, would require all of Ontario Hydro's tritium. Canada was attractive as a neutral siting alternative, and had gained early Russian support

  5. Title - EFARS - Conference (Uninvited)

    OpenAIRE

    Lohrey, MC; Lawrence, AS

    2016-01-01

    Abstract - EFARS - Conference (Uninvited) "Notes" - EFARS - Conference (Uninvited) In preparation (Publication status) Yes, full paperYes, abstract onlyNo (Peer reviewed?) "Add a comment" - EFARS - Conference - Uninvited

  6. Canadian leadership in energy

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-09-15

    Canada's energy is complex and an important resource as it fuels and funds the economy. The unique character of Canada's energy production and consumption provides strength to the country. The purpose of this booklet was to highlight Canada's energy production and consumption and to demonstrate Canada's rank globally with other major global energy players. The document also presented information on the value of Canada's energy exports, Canada's relationship with the United States, and Canada's energy-related carbon dioxide emissions. Specifically, the document discussed Canada's energy in a global context; the value of Canada's energy exports; domestic value of energy; Canada's unique energy mix; Canada's electricity mix; Canada's carbon dioxide emissions; energy strategies; and the importance of energy to Canadians. It was concluded that there are 14 federal, provincial and territorial jurisdictions managing their respective energy resources. All of these regions, with the exception of Saskatchewan have produced an energy strategy document or a climate change action plan focusing on 8 areas of action, notably awareness; benefit; efficiency; development; diversification; electricity; and emissions. refs., tabs., figs.

  7. Canadian programme overview

    International Nuclear Information System (INIS)

    Fluke, R.J.

    1997-01-01

    In a severe accident, hydrogen is released into containment. When it is well mixed, the hydrogen mixture is nonflammable because there is sufficient dilution by the large containment volume. This is the desired end point. However, the release may occur into smaller compartments of containment, stratification may occur, and local pockets of flammable mixtures may arise if hydrogen is released faster than processes that mix and disperse it. Long term hydrogen generation from water radiolysis must also be considered. Hydrogen mitigation and control strategies adopted or considered in Canada include fanforced mixing, glow plug igniters, recombiners, venting through filters, or combinations of these. The Canadian hydrogen programme is focussed on understanding hydrogen combustion behaviour and providing the data needed to demonstrate the adequacy of hydrogen mitigation and control strategies. The programme includes both experimental and modelling components of hydrogen combustion and distribution. Experiments include mixing tests, deflagration tests, diffusion flames, transition from deflagration to detonation, and testing the performance of igniters and recombiners. Modelling is focussing on the GOTHIC code as an industry standard. Detailed three dimensional modelling of gas mixing and combustion are underway, and a code validation matrix is being assembled for validation exercises. Significant progress has been made, highlights from which are being presented at this workshop. (author)

  8. Canadian fuel development program

    International Nuclear Information System (INIS)

    Gacesa, M.; Young, E.G.

    1992-11-01

    CANDU power reactor fuel has demonstrated an enviable operational record. More than 99.9% of the bundles irradiated have provided defect-free service. Defect excursions are responsible for the majority of reported defects. In some cases research and development effort is necessary to resolve these problems. In addition, development initiatives are also directed at improvements of the current design or reduction of fueling cost. The majority of the funding for this effort has been provided by COG (CANDU Owners' Group) over the past 10 to 15 years. This paper contains an overview of some key fuel technology programs within COG. The CANDU reactor is unique among the world's power reactors in its flexibility and its ability to use a number of different fuel cycles. An active program of analysis and development, to demonstrate the viability of different fuel cycles in CANDU, has been funded by AECL in parallel with the work on the natural uranium cycle. Market forces and advances in technology have obliged us to reassess and refocus some parts of our effort in this area, and significant success has been achieved in integrating all the Canadian efforts in this area. This paper contains a brief summary of some key components of the advanced fuel cycle program. (Author) 4 figs., tab., 18 refs

  9. Canadian leadership in energy

    International Nuclear Information System (INIS)

    2010-09-01

    Canada's energy is complex and an important resource as it fuels and funds the economy. The unique character of Canada's energy production and consumption provides strength to the country. The purpose of this booklet was to highlight Canada's energy production and consumption and to demonstrate Canada's rank globally with other major global energy players. The document also presented information on the value of Canada's energy exports, Canada's relationship with the United States, and Canada's energy-related carbon dioxide emissions. Specifically, the document discussed Canada's energy in a global context; the value of Canada's energy exports; domestic value of energy; Canada's unique energy mix; Canada's electricity mix; Canada's carbon dioxide emissions; energy strategies; and the importance of energy to Canadians. It was concluded that there are 14 federal, provincial and territorial jurisdictions managing their respective energy resources. All of these regions, with the exception of Saskatchewan have produced an energy strategy document or a climate change action plan focusing on 8 areas of action, notably awareness; benefit; efficiency; development; diversification; electricity; and emissions. refs., tabs., figs.

  10. Conference Proceedings

    International Nuclear Information System (INIS)

    2002-01-01

    This volume contains the unedited proceedings of the Second Annual Conference on Managing Electricity Price Volatility. There were a total of eleven papers presented, dealing with a variety of issues affecting price volatility. Subjects treated included: new power generation development in Alberta; an analysis of electricity supply and demand to predict future price volatility; the effect of government intervention in the Alberta electricity market; risk management in volatile energy markets; an analysis of Alberta's capacity to supply its own internal electric power needs; the impact of increased electricity import and export capacity on price fluctuation in Alberta; improving market liquidity in Alberta; using weather derivatives to offset price risk; the impact of natural gas prices on electricity price volatility; capitalizing on advancements in online trading; and strategies for businesses to keep operating through times of price volatility. In most cases only overhead viewgraphs are available

  11. MUSME Conference

    CERN Document Server

    Martinez, Eusebio

    2015-01-01

    This volume contains the Proceedings of MUSME 2014, held at Huatulco in Oaxaca, Mexico, October 2014. Topics include analysis and synthesis of mechanisms; dynamics of multibody systems; design algorithms for mechatronic systems; simulation procedures and results; prototypes and their performance; robots and micromachines; experimental validations; theory of mechatronic simulation; mechatronic systems; and control of mechatronic systems. The MUSME symposium on Multibody Systems and Mechatronics was held under the auspices of IFToMM, the International Federation for Promotion of Mechanism and Machine Science, and FeIbIM, the Iberoamerican Federation of Mechanical Engineering. Since the first symposium in 2002, MUSME events have been characterised by the way they stimulate the integration between the various mechatronics and multibody systems dynamics disciplines, present a forum for facilitating contacts among researchers and students mainly in South American countries, and serve as a joint conference for the ...

  12. Cairo conference.

    Science.gov (United States)

    McMichael, A J

    1994-09-03

    The United Nations Conference on Population and Development in Cairo in September, 1994, will evoke criticism of the inability of governments to act quickly enough to avert demographic and environmental crises. Rapid population growth has clear implications for public health. Globally there now occur anthropogenic changes in atmospheric composition, the degradation of fertile lands and ocean fisheries, an accelerating loss of biodiversity, and the social and ecological problems of massive urbanization. In the future, per capita consumption levels will increase in burgeoning populations of developing countries, thus adding to the environmental impacts of overconsuming rich countries. By the end of the decade there will be over six billion people, of whom one half will live in cities. These demographic and environmental trends, if translated into climatic change, regional food shortages, and weakened ecosystems, would adversely affect human health. The World Health Organization is likely to concentrate only on accessible family planning and promotion of health for women and families. Continuing asymmetric child-saving aid, unaccompanied by substantial aid to help mobilize the social and economic resources needed to reduce fertility, may delay the demographic transition in poor countries and potentiate future public health disasters. As a result of recent reductions in fertility, even in Sub-Saharan Africa, average family sizes have been halved. Yet the demographic momentum will double population by 2050. The biosphere is a complex of ecosystems and, if unsustained, it could not fulfill the productive, cleansing, and protective functions on which life depends. The Cairo conference must therefore recognize that sustaining human health is a prime reason for concern about population growth and models of economic development.

  13. CNA/CNS proceedings of the 37. annual conference 1997

    International Nuclear Information System (INIS)

    1997-01-01

    The thirty-seventh meeting of the Canadian Nuclear Association began with a joint session of keynote addresses that included the Canadian Nuclear Society. The other sessions that the 21 papers were organized under have the following titles: international opportunities for the industry, competitiveness in the marketplace, opportunities in the late nineties, moving forward in the late nineties. The conference was concerned mainly with marketing nuclear power plants, especially CANDU plants, but some papers cover such topics as uranium, fusion, and radioisotopes, all from a general, or marketing, aspect. All the individual papers published that come within the scope of INIS have been abstracted separately

  14. CNA/CNS proceedings of the 37. annual conference 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    The thirty-seventh meeting of the Canadian Nuclear Association began with a joint session of keynote addresses that included the Canadian Nuclear Society. The other sessions that the 21 papers were organized under have the following titles: international opportunities for the industry, competitiveness in the marketplace, opportunities in the late nineties, moving forward in the late nineties. The conference was concerned mainly with marketing nuclear power plants, especially CANDU plants, but some papers cover such topics as uranium, fusion, and radioisotopes, all from a general, or marketing, aspect. All the individual papers published that come within the scope of INIS have been abstracted separately.

  15. Health practices of Canadian physicians.

    Science.gov (United States)

    Frank, Erica; Segura, Carolina

    2009-08-01

    To study the health and health practices of Canadian physicians, which can often influence patient health. Mailed survey. Canada. A random sample of 8100 Canadian physicians; 7934 were found to be eligible and 3213 responded (40.5% response rate). Factors that influence health, such as consumption of fruits and vegetables, amount of exercise and alcohol consumption, smoking status, body mass idex, and participation in preventive health screening measures, as well as work-life balance and emotional stability. Canadian physicians are healthy. More than 90% reported being in good to excellent health, and only 5% reported that poor physical or mental health made it difficult to handle their workload more than half the time in the previous month (although a quarter had reduced work activity because of long-term health conditions). Eight percent were obese, 3% currently smoked cigarettes, and 1% typically consumed 5 drinks or more on days when they drank alcohol. Physicians averaged 4.7 hours of exercise per week and ate fruits and vegetables 4.8 times a day. Their personal screening practices were largely compliant with Canadian Task Force on Preventive Health Care recommendations. They averaged 38 hours per week on patient care and 11 hours on other professional activities. Fifty-seven percent agreed that they had a good work-life balance, and 11% disagreed with the statement "If I can, I work when I am ill." Compared with self-reports from the general Canadian population, Canadian physicians, like American physicians, seem to be healthy and to have generally healthy behaviour. There is, however, room for improvement in physicians' personal and professional well-being, and improving their personal health practices could be an efficient and beneficent way to improve the health of all Canadians.

  16. CNS proceedings of the 16. annual conference, volume I and II

    International Nuclear Information System (INIS)

    Wight, A.L.; Loewer, R.

    1995-01-01

    The proceedings of the 16. annual conference of the Canadian Nuclear Society cover a wide range of nuclear topics, but the emphasis is on CANDU reactors and Canadian experience. The 82 papers are arranged in 16 sessions dealing with the following subjects: thermalhydraulics, containment, control and instrumentation, reactor physics, fuel channels, engineering and maintenance, safety and licensing, severe accidents and probabilistic safety assessment, new reactors and applications, radiation, fuel, computers. The individual papers have been abstracted separately

  17. CNS proceedings of the 16. annual conference, volume I and II

    Energy Technology Data Exchange (ETDEWEB)

    Wight, A L; Loewer, R [eds.

    1996-12-31

    The proceedings of the 16. annual conference of the Canadian Nuclear Society cover a wide range of nuclear topics, but the emphasis is on CANDU reactors and Canadian experience. The 82 papers are arranged in 16 sessions dealing with the following subjects: thermalhydraulics, containment, control and instrumentation, reactor physics, fuel channels, engineering and maintenance, safety and licensing, severe accidents and probabilistic safety assessment, new reactors and applications, radiation, fuel, computers. The individual papers have been abstracted separately.

  18. Proceedings of the international conference on CANDU fuel

    International Nuclear Information System (INIS)

    Hastings, I.J.

    1986-01-01

    These proceedings contain full texts of all paper presented at the first International Conference on CANDU Fuel. The Conference was organized and hosted by the Chalk River Branch of the Canadian Nuclear Society and utilized Atomic Energy of Canada Limited's facilities at Chalk River Nuclear Laboratories. Previously, informal Fuel Information Meetings were used in Canada to allow the exchange of information and technology associated with CANDU. The Chalk River conference was the first open international forum devoted solely to CANDU and included representatives of overseas countries with current or potential CANDU programs, as well as Canadian participants. The keynote presentation was given by Dr. J.B. Slater, who noted the correlation between past successes in CANDU fuel cycle technology and the co-operation between researchers, fabricators and reactor owner/operators in all phases of the fuel cycle, and outlined the challenges facing the industry today. In the banquet address, Dr. R.E. Green described the newly restructured AECL Research Company and its mission which blends traditional R and D with commercial initiatives. Since this forum for fuel technology has proven to be valuable, a second International CANDU Fuel Conference is planned for the fall of 1989, again sponsored by the Canadian Nuclear Society

  19. Chair of geotechnical processes at the Institute for geotechnics and mine surveying at Clausthal Technological University; Professur fuer Geotechnische Verfahren am Institut fuer Geotechnik und Marktscheidewesen der TU Clausthal

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, N. [Technische Univ. Clausthal, Institut fuer Geotechnik und Marktscheidewesen (Germany)

    2003-08-14

    The Chair of Geotechnical Processes at the Institute for Geotechnics and Mine Surveying at Clausthal Technological University is concerned primarily with practical fundamental research in addition to teaching, in which comprehensive theoretical and practical experience from all areas of geotechnics is imparted. (orig.) [German] Der Lehrstuhl Geotechnische Verfahren am Institut fuer Geotechnik und Markscheidewesen der TU Clausthal befasst sich neben der Lehre, in der umfangreiche theoretische und praktische Erfahrungen aus allen Bereichen der Geotechnik vermittelt werden, in erster Linie mit der praxisnahen Grundlagenforschung. Die bearbeiteten Problemstellungen liegen bei der Bauwerk-Baugrund-Interaktion, Stabilitaetsproblemen bei Unterwasserboeschungen, der Umweltgeotechnik, der Geomesstechnik und dem Einsatz von Geokunststoffen in der Geotechnik und dem Bergbau. Die Forschungsvorhaben werden in enger Kooperation mit der Industrie durchgefuehrt. (orig.)

  20. Conference summaries

    Energy Technology Data Exchange (ETDEWEB)

    Reynolds, Tim [Inta Communication Limited for European Service Network/ DG Research, Trillium House, 32 New Street, St. Neots, Cambridge PE19 1AJ (United Kingdom)

    2004-07-01

    The summaries were derived from presentations, interviews and discussions at the conference. The summaries are given at two levels, overall for the conference and for specific sessions as follows: 1) Overall Conference: 'A Sound Scientific Basis for Serious Decisions; 2) Sessions on EC Policy and Socio-Political Issues: 'Promoting Safety and Protecting Society'; 3) Session on P and T: 'Partitioning and Transmutation: A Technical Fix or Technical Training?'; 4) Sessions on Geological Disposal and Research Networking: 'No Technical Barriers to Geological Disposal'. First an overall summary of Euradwaste '04 is presented. Significant progress was made on the technical and scientific basis for geological disposal of radioactive waste during the European Commission's Fifth EURATOM Framework Programme for Research (FP5). Deep geological disposal is technically feasible now and can demonstrate the guarantees of long-term isolation and protection of the public. In parallel, socio-political studies have produced methodologies for constructive dialogue with potential host communities that reflect the honesty and openness expected by a democratic society. A harmonized legislative framework for nuclear safety and waste disposal across the enlarged European Union is currently being discussed. Disposal in deep (> 300 metre) geological repositories, the favoured strategy in Europe for long-lived high-level radioactive waste, is now possible. The Sessions on EC Policy and Socio-Political Issues are summarized as follows. The opening day of Euradwaste '04 focused on European Commission policy, including the proposed Directives on disposal of radioactive waste and nuclear safety and socio-political aspects including governance and decision making, public perception/acceptance of waste disposal and its sustainability. A decision on the proposed package will now be made after Union enlargement. Public agreement on the siting of

  1. Canadian perspectives in evaluating transparency

    International Nuclear Information System (INIS)

    Herwig, L.

    2007-01-01

    The Canadian Nuclear Safety Commission's mission is to regulate the use of nuclear energy and materials to protect the health, safety, and security of Canadians and the environment, as well as to respect Canada's international commitments on the peaceful use of nuclear energy. In 2001, the CNSC established a vision to be one of the best nuclear regulators in the world and established four strategic priorities of effectiveness, transparency, excellence in staff, and efficiency. While fulfilling a very comprehensive mandate, the CNSC operates with a. very clear vision of its clientele - the Canadian people. That commitment guides every employee and every action of the CNSC and ensures a firm commitment to transparency. The presentation will begin with a brief overview of the worldwide context of transparency and transparency measurement, with a look at what lessons can be learned from other organizations and initiatives. It will look broadly at the Canadian context and the government framework that establishes transparency, including the keystone legislation of the Access to Information Act. The presentation will then focus on the Canadian Nuclear Safety Commission. The CNSC is firmly committed to putting additional measures in place to ensure transparency, which is being done concurrently with an overall organisational performance measurement system. It is within this framework that the presentation will address the transparency efforts at the CNSC as well transparency measurement activities. And, finally, the presentation will look at future directions for transparency and its measurement at the CNSC. (author)

  2. Geotechnical parameter spatial distribution stochastic analysis based on multi-precision information assimilation

    Science.gov (United States)

    Wang, C.; Rubin, Y.

    2014-12-01

    Spatial distribution of important geotechnical parameter named compression modulus Es contributes considerably to the understanding of the underlying geological processes and the adequate assessment of the Es mechanics effects for differential settlement of large continuous structure foundation. These analyses should be derived using an assimilating approach that combines in-situ static cone penetration test (CPT) with borehole experiments. To achieve such a task, the Es distribution of stratum of silty clay in region A of China Expo Center (Shanghai) is studied using the Bayesian-maximum entropy method. This method integrates rigorously and efficiently multi-precision of different geotechnical investigations and sources of uncertainty. Single CPT samplings were modeled as a rational probability density curve by maximum entropy theory. Spatial prior multivariate probability density function (PDF) and likelihood PDF of the CPT positions were built by borehole experiments and the potential value of the prediction point, then, preceding numerical integration on the CPT probability density curves, the posterior probability density curve of the prediction point would be calculated by the Bayesian reverse interpolation framework. The results were compared between Gaussian Sequential Stochastic Simulation and Bayesian methods. The differences were also discussed between single CPT samplings of normal distribution and simulated probability density curve based on maximum entropy theory. It is shown that the study of Es spatial distributions can be improved by properly incorporating CPT sampling variation into interpolation process, whereas more informative estimations are generated by considering CPT Uncertainty for the estimation points. Calculation illustrates the significance of stochastic Es characterization in a stratum, and identifies limitations associated with inadequate geostatistical interpolation techniques. This characterization results will provide a multi

  3. SIG Contribution in the Making of Geotechnical Maps in Urban Areas

    Science.gov (United States)

    Monteiro, António; Pais, Luís Andrade; Rodrigues, Carlos; Carvalho, Paulo

    2017-10-01

    The use of Geographic Information Systems (GIS) has spread to several science areas, from oceanography to geotechnics. Its application in the urban mapping was intensified in the last century, which allowed a great development, due to the use of geographic database, new analysis tools and, more recently, free open source software. Geotechnical cartography struggle with a permanent and large environment re-organization in urban area, due to new building construction, trenching and the drilling of sampling wells and holes. This creates an extra important and largest volume of data at any pre-existence geological map. The main problem results on the fact that the natural environment is covered with buildings and communications system. The purpose of this work is to create a viable geographic information base for geotechnical mapping through a free GIS computer program and open source, with non-traditional cartographic sources, giving preference to open platforms. QGIS was used as software and “Google Maps”, “Bing Maps” and “OpenStreetMap” were applied as cartographic sources using the “OpenLayers plugin” module. Finally, we also pretend to identify and delimit the degree of granite’s change and fracturing areas using a “Streetview” platform. This model has cartographic input which are a geological map study area, open cartographic web archives and the use of “Streetview” platform. The output has several layouts, such as topography intersection (roads, borders, etc.), with geological map and the bordering area of Guarda Urban Zone. The use of this platform types decrease the collect data time and, sometimes, a careful observation of pictures that were taken during excavations may reveal important details for geological mapping in the study area.

  4. Subsidence monitoring with geotechnical instruments in the Mexicali Valley, Baja California, Mexico

    Science.gov (United States)

    Glowacka, E.; Sarychikhina, O.; Márquez Ramírez, V. H.; Robles, B.; Nava, F. A.; Farfán, F.; García Arthur, M. A.

    2015-11-01

    The Mexicali Valley (northwestern Mexico), situated in the southern part of the San Andreas fault system, is an area with high tectonic deformation, recent volcanism, and active seismicity. Since 1973, fluid extraction, from the 1500-3000 m depth range, at the Cerro Prieto Geothermal Field (CPGF), has influenced deformation in the Mexicali Valley area, accelerating the subsidence and causing slip along the traces of tectonic faults that limit the subsidence area. Detailed field mapping done since 1989 (González et al., 1998; Glowacka et al., 2005; Suárez-Vidal et al., 2008) in the vicinity of the CPGF shows that many subsidence induced fractures, fissures, collapse features, small grabens, and fresh scarps are related to the known tectonic faults. Subsidence and fault rupture are causing damage to infrastructure, such as roads, railroad tracks, irrigation channels, and agricultural fields. Since 1996, geotechnical instruments installed by CICESE (Centro de Investigación Ciéntifica y de Educación Superior de Ensenada, B.C.) have operated in the Mexicali Valley, for continuous recording of deformation phenomena. Instruments are installed over or very close to the affected faults. To date, the network includes four crackmeters and eight tiltmeters; all instruments have sampling intervals in the 1 to 20 min range. Instrumental records typically show continuous creep, episodic slip events related mainly to the subsidence process, and coseismic slip discontinuities (Glowacka et al., 1999, 2005, 2010; Sarychikhina et al., 2015). The area has also been monitored by levelling surveys every few years and, since the 1990's by studies based on DInSAR data (Carnec and Fabriol, 1999; Hansen, 2001; Sarychikhina et al., 2011). In this work we use data from levelling, DInSAR, and geotechnical instruments records to compare the subsidence caused by anthropogenic activity and/or seismicity with slip recorded by geotechnical instruments, in an attempt to obtain more information

  5. Subsidence monitoring with geotechnical instruments in the Mexicali Valley, Baja California, Mexico

    Directory of Open Access Journals (Sweden)

    E. Glowacka

    2015-11-01

    Full Text Available The Mexicali Valley (northwestern Mexico, situated in the southern part of the San Andreas fault system, is an area with high tectonic deformation, recent volcanism, and active seismicity. Since 1973, fluid extraction, from the 1500–3000 m depth range, at the Cerro Prieto Geothermal Field (CPGF, has influenced deformation in the Mexicali Valley area, accelerating the subsidence and causing slip along the traces of tectonic faults that limit the subsidence area. Detailed field mapping done since 1989 (González et al., 1998; Glowacka et al., 2005; Suárez-Vidal et al., 2008 in the vicinity of the CPGF shows that many subsidence induced fractures, fissures, collapse features, small grabens, and fresh scarps are related to the known tectonic faults. Subsidence and fault rupture are causing damage to infrastructure, such as roads, railroad tracks, irrigation channels, and agricultural fields. Since 1996, geotechnical instruments installed by CICESE (Centro de Investigación Ciéntifica y de Educación Superior de Ensenada, B.C. have operated in the Mexicali Valley, for continuous recording of deformation phenomena. Instruments are installed over or very close to the affected faults. To date, the network includes four crackmeters and eight tiltmeters; all instruments have sampling intervals in the 1 to 20 min range. Instrumental records typically show continuous creep, episodic slip events related mainly to the subsidence process, and coseismic slip discontinuities (Glowacka et al., 1999, 2005, 2010; Sarychikhina et al., 2015. The area has also been monitored by levelling surveys every few years and, since the 1990's by studies based on DInSAR data (Carnec and Fabriol, 1999; Hansen, 2001; Sarychikhina et al., 2011. In this work we use data from levelling, DInSAR, and geotechnical instruments records to compare the subsidence caused by anthropogenic activity and/or seismicity with slip recorded by geotechnical instruments, in an attempt to obtain

  6. Geotechnical conditions of Bulgaria and site selection for radioactive waste repository

    International Nuclear Information System (INIS)

    Iliev, I.; Tacheva, E.

    1993-01-01

    A comparative study of the complex structure of the Bulgarian lands and the engineering geological criteria for site selection of national repositories for high level radwastes is made. A detailed description of the following geotechnical conditions of Bulgaria's territory is given: genetic, lithological and engineering-geological types of rocks; physico-mechanical parameters of the most widespread rocky and semi-rocky engineering geological types; fissuring of the rocks; rock massifs; geodynamic processes. The number of promising variants for repositories have been classified according to the structure of the rock massif and the engineering-geological properties of the layers which are promising for the purpose. The following sites are investigated: 1) sites in one-type homogeneous rock massifs of high strength and elasticity; 2) sites of various type massifs with a promising layer of rocks with medium strength and elasticity; 3) sites in various type massifs with a promising layer of plastic rocks of low strength. It is concluded that the complexity of the geotechnical and other conditions in the territory of Bulgaria would predetermine the deficiency of the list of the properties required for the selected sites. The building up of engineering defence will be needed to offset that deficiency and their problems will be resolved after the specific site have been chosen. Geotechnical elements should be likewise envisaged within the general pattern of the monitoring needed. The designing, installing and putting into operation of the monitoring systems should be accomplished as early as the stage of the detailed investigation of the site selected. 19 refs., 2 suppls. (author)

  7. Geotechnical investigation for seismic issues for K-reactor area at Savannah River Site

    International Nuclear Information System (INIS)

    Castro, G.; Reeves, C.Q.

    1991-01-01

    A geotechnical investigation has been completed at Savannah River Site to characterize the foundation conditions in K-Reactor Area and confirm soil design properties for use in seismic qualification of structures. The scope of field work included ten soil borings to a 200-foot depth with split-spoon and undisturbed sampling. Additionally, 42 cone penetrometer tests were performed with seismic down-hole measurements. Three cross-hole shear wave velocity tests were also completed to confirm the assumed dynamic properties which had been used in preliminary seismic analysis

  8. Geotechnical properties of municipal solid waste at different phases of biodegradation

    International Nuclear Information System (INIS)

    Reddy, Krishna R.; Hettiarachchi, Hiroshan; Gangathulasi, Janardhanan; Bogner, Jean E.

    2011-01-01

    Highlights: → Degraded synthetic municipal solid waste (MSW) anaerobically in controlled bench-scale reactors. → Performed laboratory tests to determine geotechnical properties of MSW at different phases of degradation. → Hydraulic conductivity decreased by two orders of magnitude due to degradation. → Compression ratio reduced from 0.34 for initial fresh waste to 0.15 for the mostly degraded waste. → Friction angle reduced, but cohesion increased with degradation. - Abstract: This paper presents the results of laboratory investigation conducted to determine the variation of geotechnical properties of synthetic municipal solid waste (MSW) at different phases of degradation. Synthetic MSW samples were prepared based on the composition of MSW generated in the United States and were degraded in bioreactors with leachate recirculation. Degradation of the synthetic MSW was quantified based on the gas composition and organic content, and the samples exhumed from the bioreactor cells at different phases of degradation were tested for the geotechnical properties. Hydraulic conductivity, compressibility and shear strength of initial and degraded synthetic MSW were all determined at constant initial moisture content of 50% on wet weight basis. Hydraulic conductivity of synthetic MSW was reduced by two orders of magnitude due to degradation. Compression ratio was reduced from 0.34 for initial fresh waste to 0.15 for the mostly degraded waste. Direct shear tests showed that the fresh and degraded synthetic MSW exhibited continuous strength gain with increase in horizontal deformation, with the cohesion increased from 1 kPa for fresh MSW to 16-40 kPa for degraded MSW and the friction angle decreased from 35 o for fresh MSW to 28 o for degraded MSW. During the triaxial tests under CU condition, the total strength parameters, cohesion and friction angle, were found to vary from 21 to 57 kPa and 1 o to 9 o , respectively, while the effective strength parameters, cohesion

  9. Influence of Amang (Tin Tailing) on Geotechnical Properties of Clay Soil

    International Nuclear Information System (INIS)

    Zulfahmi, A.R.; Zuhairi, W.Y.W.; Raihan, M.T.; Sahibin, A.R.; Razi, I.W.M.; Tukimat, L.; Syakireen, Z.S.N.; Noorulakma, A.

    2012-01-01

    Amang or tin tailing is commonly found in the vicinity of disused mining area and responsible in downgrading the water quality, landscape and mechanical behaviour of soils. It was generated from extraction process of separating valuable metal from particular ore. This paper presents the geotechnical characteristics of amang-contaminated clay soil. The geotechnical properties of uncontaminated soils were studied in order to compare to that of amang contaminated soils. The base soil used in this study represents completely weathered horizon of meta sedimentary rock. Meanwhile, tin tailing sample was taken from the disused mine at Sungai Lembing, Pahang. The geotechnical characterisations of base soil and contaminated soils were determined based on consistency index, compaction behaviour, hydraulic conductivity and undrained shear strength (UU tests). Contaminated soil samples were prepared by adding 5, 10 and 20 % of tailing, based on dry weigh of the studied base soil. The results from the particle size distribution analysis showed that residual soil from meta sedimentary rock comprised 42.6 % clay, 32.2 % silt and 25.2 % sand whilst tailing was dominated by 98 % of sand fraction. XRD analysis indicated the presence of quartz, kaolinite and muscovite minerals in the studied soil. The specific gravity of soil used is 2.67 and the pH is 3.88. Tailing found to have higher specific gravity of 3.37. The consistency index of contaminated soils showed that liquid limit, wL and plastic limit, wP decreased with the increase in the percentage of tailing added to the soil samples. The value of maximum dry density, ρ dry max increased while optimum moisture content decreased due to the increase in tailing content in soil sample. The permeability of contaminated soil also increased with the increase in tailing contents ranged from 19.8 cm/ hr to 23.8 cm/ hr. The undrained shear strength, Cu, of contaminated soil decreased from 646 kPa (5 % of tailing) to 312 kPa (20 % of

  10. WSSRAP chemical plant geotechnical investigations for the Weldon Spring Site Remedial Action Project, Weldon Spring, Missouri

    International Nuclear Information System (INIS)

    1990-12-01

    This document has been prepared for the United states Department of Energy (DOE) Weldon Spring Site Remedial Action Project (WSSRAP) by the Project Management Contractor (PMC), which consists of MK-Ferguson Company (MKF) and Morrison Knudsen Corporation Environmental Services Group (MKES) with Jacobs Engineering Group (JEG) as MKF's predesignated subcontractor. This report presents the results of site geotechnical investigations conducted by the PMC in the vicinity of the Weldon Spring chemical plant and raffinate pits (WSCP/RP) and in potential on-site and off-site clayey material borrow sources. The WSCP/RP is the proposed disposal cell (DC) site. 39 refs., 24 figs., 12 tabs

  11. Update of assessment of geotechnical risks, strategic petroleum reserve, Weeks Island site

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, S.J. [ed.

    1994-12-01

    This report is a critical reassessment of the geotechnical risks of continuing oil storage at the Weeks Island Strategic Petroleum Reserve site. It reviews all previous risk abatement recommendations, subsequent mitigative actions, and new information. Of increased concern, due to the discovery of a surface levels, is the long term maintainability of the mine as an oil storage repository. Mine operational changes are supported in order to facilitate monitoring of water entry diagnostics. These changes are also intended to minimize the volume in the mine available for water entry. Specific recommendations are made to implement the mine changes.

  12. The spatial information system EramSIS in the service of geotechnical monitoring

    International Nuclear Information System (INIS)

    Heller, M.; Skrzyppek, J.; Croise, J.; Mauke, R.; Mohlfeld, M.

    2005-01-01

    Backfilling activities in the Morsleben radioactive waste repository (ERAM) began in 2003. They are necessary to stabilize the intensely mined central part of the repository. Thanks to geotechnical monitoring it is possible to ensure the local structural stability and the mandatory operational safety. The use of the integrated spatial information system EramSIS right from an early stage makes it possible to locate the great number of continuously acquired measurement results in a three-dimensional model on the computer screen. The interactive visualization proved to greatly facilitate the interpretation of the various types of information. (authors)

  13. Geotechnical assessment and instrumentation needs for isolation of nuclear waste in crystalline rocks: symposium proceedings

    International Nuclear Information System (INIS)

    Ubbes, W.F.; Duguid, J.O.

    1985-09-01

    On October 15-19, 1984, the Geotechnical Assessment and Instrumentation Needs (GAIN) Symposium was convened to examine the status of technology for the isolation of nuclear waste in crystalline rock. The objective of the 1984 GAIN Symposium was to provide technical input to the Crystalline Repository Project concerning: critical issues and information needs associated with development and assessment of a repository in crystalline rock; appropriate techniques and instrumentation for determining the information needed; and technology required to provide the measurement techniques and instrumentation for application in an exploratory shaft in crystalline rock. The findings and recommendations of the symposium are presented in these proceedings

  14. Geotechnical aspects of the UK DOE-sponsored radioactive waste disposal research programme

    International Nuclear Information System (INIS)

    Cooling, C.M.; Hudson, J.A.

    1987-01-01

    One of the crucial factors for underground repository design is understanding the engineering properties and behaviour of the host rock. To develop this understanding, the Department of the Environment has sponsored a continuing programme of geotechnical research from 1979 to the present day. The authors describe the structure of the research programme, highlight some of the individual projects, indicate the most important conclusions and provide an overview of both the current state of knowledge and 'the way ahead'. 9 refs.; 9 figs.; 1 table

  15. Experience acquired with the realisation of a geotechnical measurement campaign in a deep clay formation

    International Nuclear Information System (INIS)

    Manfroy, P.; Neerdael, B.; Buyens, M.

    1985-01-01

    Belgium has selected clay as a possible disposal medium for conditioned radioactive waste. CEN/SCK has launched an important research and development programme to evaluate the disposal potential of the Boom clay formation present under the nuclear site Mol-Dessel. An underground facility has been built at 220 m. depth in order to proceed to geomechanical, corrosion, migration and heat transfer experiments. During its construction numerous geotechnical measuring instruments were emplaced on the lining and in the clay medium. Successful realization of such measurement campaigns was hampered by the very difficult underground working conditions. This paper describes what can be learned from the experience gained so far. 5 refs.; 5 figs

  16. Geotechnical properties of La Arganosa Formation (Upper Cretaceous, Oviedo); Propiedades geotecnicas de la Formacion La Arganosa (Cretacico Superior, Oviedo)

    Energy Technology Data Exchange (ETDEWEB)

    Pando, L.; Gutierrez Claverol, M.; Flor-Blanco, G.

    2011-07-01

    It is performed the first geotechnical synthesis for La Arganosa Formation, the Cretaceous lithostratigraphic unit with very low geomechanical quality under the urban core of Oviedo; it also configures a major regional aquifer. In this study, geotechnical parameters of identification and condition, as well as physical and hydraulic ones, are compiled, statistically treated and interpreted. They were obtained from about 400 laboratory tests and more than 250 field tests around the city. The unit, of detrital origin, is bounded at the bottom and top by limestone lithologies, and is made up of soils and very soft rocks in alternating granular and cohesive layers. It discusses the main properties that define its geotechnical behavior: particle size distribution, plasticity, strength, compactness, consistency, compressibility, expansivity, collapsibility, permeability, and chemical aggressiveness of the materials and water. Furthermore, same numerical values are provided for reference forward guidance for future research to develop on this formation. (Author) 31 refs.

  17. Current status of geotechnical research on the long-term safety of permanent repositories for nuclear waste

    International Nuclear Information System (INIS)

    Langer, M.

    1988-01-01

    The planned permanent underground repository for non-heat-generating wastes in the former Konrad iron-ore mine is now in the final stages of the plan approval procedures. The deadline for the final stages of the plan approval procedures for the Gorleben salt dome is approaching. It is time to give an account of what has been accomplished in the geotechnical field. The BGR has developed a complex geotechnical stability analysis that takes into account the requirements of permanent storage and the objectives required for the protection of the biosphere. This stability analysis is based on the following considerations: Owing to the complexity of the boundary conditions, a cavity intended for a permanent repository can be demonstrated to be safe only by a combination of studies and simulations. These studies must integrate engineering geology, geotechnics, rock mechanics, statics, monitoring of the conditions in the repository, and mining expertise. (orig.) With 27 figs

  18. Ultimate storage of radioactive waste - geotechnical challenge or routine task?; Endlagerung radioaktiver Abfaelle - Herausforderung oder Routine fuer die Geotechnik?

    Energy Technology Data Exchange (ETDEWEB)

    Alheid, H.J. [Bundesanstalt fuer Geowissenschaften und Rohstoffe, Hannover (Germany)

    2005-07-01

    Construction, operation and decommissioning of nuclear waste repositories require sophisticated design, high-tech technical implementation and reliable performance assessment studies. Geotechnical methods have been applied in many research projects and tailored to the high standards of nuclear waste disposal. Exemplary the development of methods for the characterization of excavation damaged zones (EDZ) is discussed in this paper. Well known geotechnical and geophysical methods have been adapted to fulfil the requirements of essential high resolution in space and the necessity of long term observations. The achieved improvements in measurement techniques and data processing allow to describe the properties of the EDZ in detail. Scientist have accepted the challenge and fulfilled the special requirements of measuring, monitoring and modelling in the field of nuclear waste disposal. The newly developed methods should be checked for their applicability to other geotechnical problems in order to achieve more detailed results than with standard methods. (orig.)

  19. Chernobyl - a Canadian technical perspective

    International Nuclear Information System (INIS)

    Howieson, J.Q.; Snell, V.G.

    1987-01-01

    In this report we present the design review done to date in Canada by AECL. From the Canadian point of view it covers: 1) relevant information on the Chernobyl design and the accident, both as presented by the Soviets at the Post-Accident Review Meeting (PARM) held in Vienna from August 25-29, 1986, and as deduced from publicly available Soviet documentation; and 2) details of AECL's technical review of the CANDU PHWR (Pressurized Heavy Water Reactor) against the background of the Chernobyl accident, and implications of the Chernobyl accident. Reviews of operational aspects are underway by the Canadian electrical utilities and a review by the Canadian regulatory agency (the Atomic Energy Control Board) is near completion

  20. Responsible Canadian energy progress report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    The Canadian Association of Petroleum Producers (CAPP) represents oil and gas companies throughout Canada; its members produce over 90% of Canada's natural gas and crude oil output. The aim of the Association is to improve the economics of the Canadian upstream petroleum sector in an environmentally and socially responsible way. The aim of this Responsible Canadian Energy report is to present the performance data of CAPP's members for the year 2009. Data, trends, and performance analyses are provided throughout the document. This analysis makes it possible to determine where progress has been made and where performance improvement is necessary. It also presents success stories and best practices so that other companies can learn from them how to improve their own performance. This paper provides useful information on the performance of the upstream petroleum industry in Canada and highlights where the focus should be for further improvement in its performance.

  1. Management of Canadian mineral resources: an industry viewpoint

    Energy Technology Data Exchange (ETDEWEB)

    Powis, A

    1976-03-01

    Federal and provincial governments in Canada are developing strategies for a national mineral policy, the theme being to obtain optimum benefit for Canada from present and future use of minerals. The provisions of the British North America Act, the centerpiece of Canada's constitution, place ownership of natural resources under the jurisdiction of the province in which they are found, although it retains exclusive authority for the Federal government over the export and interprovincial trade of such resources. Contradiction and challenges are now being experienced between these two levels of government, resulting in excess taxation policies in the minerals industry. Mr. Powis discussed these issues at the 32nd Annual Conference of Provincial Ministers of Mines in Saskatoon on September 15, 1975. The roles of the private sector and governments, the Economic Council of Canada trade strategy report, the mineral area planning study, and the public and political perceptions are reviewed. Options for the future are summarized. Mr. Powis concludes that the atmosphere of confrontation in Canadian mineral policy leads to irrational management of Canadian resources; further, he sees a lack of communication between industry and government as complicating the issue. The Canadian mining industry also faces the other serious problems: (1) mining problems in inhospitable areas; (2) continuing difficulty in attracting and retaining trained labor forces; (3) increasing costs of exploration and transport; (4) competing with larger and more accessible deposits in other parts of the world; and (5) the impact of inflation in all areas of the industry. (MCW)

  2. Political Socialization Research and Canadian Studies

    Science.gov (United States)

    Tomkins, George S.

    1977-01-01

    Presents a review of the burgeoning field of Canadian political socialization research as it applies to children and youth, and considers some implications of recent findings for the Canadian studies curriculum. (Editor)

  3. Research Awards: Canadian Partnerships Program Deadline: 12 ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Jean-Claude Dumais

    2012-09-12

    Sep 12, 2012 ... IDRC's Canadian Partnerships (CP) Program offers a Research ... For this, they may consider quantitative and qualitative methods, case studies, ... What types of processes do Canadian organizations use to learn about their ...

  4. Ethno-linguistic peculiarities of French Canadian and English ...

    African Journals Online (AJOL)

    When English Canadian and French Canadian phraseology is compared, the greater role of religion in the French Canadian community is evident, rather than in English Canadian; the influence of the Canadian variant of the English language on the Canadian variant of French is clearly expressed. With all the differences, ...

  5. Transnational archives: the Canadian case

    Directory of Open Access Journals (Sweden)

    Julia Creet

    2011-05-01

    Full Text Available This paper is a brief overview of the concept of the transnational archive as a counterpoint to the idea that a national archive is necessarily a locus of a static idea of nation. The Canadian national archives is used as a case study of an archives that was transnational in its inception, and one that has continued to change in its mandate and materials as a response to patterns in migration and changing notions of multiculturalism as a Canadian federal policy. It introduces the most recent formation of the transnational archive and its denizens: the genealogical archive inhabited by family historians.

  6. Canadian attitudes to nuclear power

    International Nuclear Information System (INIS)

    Davies, J.E.O.; Dobson, J.K.; Baril, R.G.

    1977-05-01

    A national assessment was made of public attitudes towards nuclear power, along with regional studies of the Maritimes and mid-western Canada and a study of Canadian policy-makers' views on nuclear energy. Public levels of knowledge about nuclear power are very low and there are marked regional differences. Opposition centers on questions of safety and is hard to mollify due to irrational fear and low institutional credibility. Canadians rate inflation as a higher priority problem than energy and see energy shortages as a future problem (within 5 years) and energy independence as a high priority policy. (E.C.B.)

  7. Issues in Canadian LLRW management

    International Nuclear Information System (INIS)

    Charlesworth, D.H.

    1988-01-01

    Some of the issues which are of concern in Canada are similar to those being discussed in the US because Canadian low-level radioactive waste (LLRW) production is similar in quantity and characteristics to that which will be handled by some state compacts. This paper gives a Canadian viewpoint of: the choice between interim storage and permanent disposal; the importance of considering inadvertent intrusion; the role of waste categorization and stability; and the concerns in assessing disposal performance. The discussion is related to Atomic Energy of Canada Limited's LLRW disposal program, and its approach to resolving these issues

  8. Geotechnical, geological, and selected radionuclide retention characteristics of the radioactive waste disposal site near the Farallon Islands

    Science.gov (United States)

    Booth, J.S.; Winters, W.J.; Poppe, L.J.; Neiheisel, J.; Dyer, R.S.

    1989-01-01

    A geotechnical and geological investigation of the Farallon Islands low-level radioactive waste (LLW) disposal area was conducted to qualitatively assess the host sediments' relative effectiveness as a barrier to radionuclide migration, to estimate the portion of the barrier that is in contact with the waste packages at the three primary disposal sites, and to provide a basic physical description of the sediments. Box cores recovered from within the general disposal area at depths of 500, 1000, and 1500 m were subcored to provide samples (~30 cm in length) for detailed descriptions, textural and mineralogical analyses, and a suite of geotechnical tests (index property, CRS consolidation, and CIU triaxial compression). -from Authors

  9. Rockfall risk evaluation using geotechnical survey, remote sensing data, and GIS: a case study from western Greece

    Science.gov (United States)

    Nikolakopoulos, Konstantinos; Depountis, Nikolaos; Vagenas, Nikolaos; Kavoura, Katerina; Vlaxaki, Eleni; Kelasidis, George; Sabatakakis, Nikolaos

    2015-06-01

    In this paper a specific example of the synergistic use of geotechnical survey, remote sensing data and GIS for rockfall risk evaluation is presented. The study area is located in Western Greece. Extensive rockfalls have been recorded along Patras - Ioannina highway just after the cable-stayed bridge of Rio-Antirrio, at Klokova site. The rockfalls include medium- sized limestone boulders with volume up to 1.5m3. A detailed engineering geological survey was conducted including rockmass characterization, laboratory testing and geological - geotechnical mapping. Many Rockfall trajectory simulations were done. Rockfall risk along the road was estimated using spatial analysis in a GIS environment.

  10. The relationship of structures and geological-building of Rudòany ore field to geotechnics features

    Directory of Open Access Journals (Sweden)

    Vavrek Pavol

    1999-12-01

    Full Text Available The geostructural and geotechnical analysis was aimed at the concrete conditions of the Rudòany ore field at the Spiš region, the part of the Slovak Republic. Our research results make it possible to minimalize the negative influence of moisture liquidation of the mine field from the ecological point of view. The paper is devided into followings parts: present and future moisture liquidations and their influences on surface subsidences, the theoretical principles for the geotechnical evaluation of the subsidences and application of the principles.

  11. Charting the new world order: proceedings of the 15. CERI international oil and gas markets conference

    International Nuclear Information System (INIS)

    1996-10-01

    The 15th International Oil and Gas Markets Conference, organized by the Canadian Energy Research Institute (CERI) and held in Calgary, AB, provided a wide variety of opportunities for discussion of the global oil and gas market outlook, international oil and gas market strategies and corporate planning in the new world order, competition for investments, the re-emergence of the geopolitics of energy, energy in the Americas, international gas market strategies, and the financing of Canadian international operations. More than 100 delegates from around the world attended the conference to hear some 20 presentations. refs., tabs., figs

  12. The Electro-Federation holds its annual conference under the theme of convergence

    International Nuclear Information System (INIS)

    Anon.

    1998-01-01

    An outline of the program for the 1998 annual meeting of the Canadian Electro-Federation was presented. The meeting was held in Quebec City in June 1998 under the theme C onverging competencies: The channel of choice . The meeting was designed to provide relevant information to the participants on the topics of deregulation. The federation invited the participation of delegates from the Canadian Association of Electrical Manufacturers. One of the highlights of the conference was a panel discussion by industry experts on the topic of converging competencies. The conference also included the usual private meetings between manufacturers and distributors of electrical equipment

  13. Financial outlook for the Canadian gas industry

    International Nuclear Information System (INIS)

    Friedenberg, B.

    1995-01-01

    The financial outlook for the Canadian gas industry depends on the outlook for gas prices at Canadian producing basins, the cost of producing in Canada and the volume of production of Canadian natural gas. Price, cost and volume determine the health of the Canadian industry. Industry's costs are the basis of the supply (volume) offered on the market and price is determined by the interaction of supply and demand. (author)

  14. Third national climate change conference proceedings

    International Nuclear Information System (INIS)

    1997-01-01

    The international issue of climate change was discussed at this AREA (Alliance for Responsible Environmental Alternatives) conference. AREA, a coalition of industry, labour and municipalities from across Canada, was created to reflect the views and represent the interest of Canadians in the Climate Change debate. The role that Canada should play to optimize Canada's response to the Global Climate Change Challenge at the Kyoto Conference was the principal topic of discussion. Specific topics for panel discussions included the economic impacts of climate change, the effectiveness of voluntary mechanisms to reduce greenhouse gases versus government-mandated actions for achieving climate change targets, the issue of how a differentiated system for emission reduction targets and timetables might be implemented, the economic imperatives and the effect of those imperatives on negotiating positions at Kyoto, and various national agendas and the likely outcomes at Kyoto. tabs., figs

  15. The Canadian fuel waste management program

    International Nuclear Information System (INIS)

    McConnell, D.B.

    1986-04-01

    This report is the sixth in the series of annual reports on the research and development program for the safe management and disposal of Canada's nuclear fuel waste. The report summarizes progress in 1984 for the following activities: storage and transportation of used fuel, immobilization of nuclear fuel waste, geotechnical research, environmental research, and environmental and safety assessment. 186 refs

  16. Canadian International Food Security Research Fund (CIFSRF ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Canadian International Food Security Research Fund (CIFSRF). The Canadian International Food Security Research Fund (CIFS-RF) is a collaborative program of the Canadian International Development Agency (CIDA) and IDRC valued at CA $61 654 707 (CIDA: CA $50 000 000; IDRC: CA $11 654 707). The program ...

  17. Geotechnical characterization of boom clay in relation to the disposal of radioactive waste

    International Nuclear Information System (INIS)

    Horseman, S.T.; Winter, M.G.; Enwistle, D.C.

    1987-01-01

    This report describes the results of a laboratory study on the geotechnical properties of the Tertiary Boom clay. Tests were performed on 'undisturbed' samples of clay taken from a location 247 m below surface at the SCK/CEN experimental site at Mol in Belgium. In geotechnical terms, the Boom clay (at depth) may be described as a hard, high-plasticity, overconsolidated clay. Test methods have included (a) the one-dimensional consolidation test with consolidation stresses up to 32 MPa, (b) the one dimensional swelling pressure test, (c) the isotropically-consolidated, undrained (CIU) triaxial test with pore pressure measurement, and (d) the unconsolidated undrained (UU) triaxial test. All triaxial tests were load-controlled. Limited test results are presented on pore pressure responses during heating under undrained conditions and on the effect of elevated temperature (80 O C) on deformability and strength. It is found that significantly large excess pore pressures (circa 1 MPa under in situ stress conditions) may be developed during heating from ambient laboratory temperature to 80 O C. The effect is due, at least in part, to the expansion of the pore fluid

  18. Integrating weather and geotechnical monitoring data for assessing the stability of large scale surface mining operations

    Science.gov (United States)

    Steiakakis, Chrysanthos; Agioutantis, Zacharias; Apostolou, Evangelia; Papavgeri, Georgia; Tripolitsiotis, Achilles

    2016-01-01

    The geotechnical challenges for safe slope design in large scale surface mining operations are enormous. Sometimes one degree of slope inclination can significantly reduce the overburden to ore ratio and therefore dramatically improve the economics of the operation, while large scale slope failures may have a significant impact on human lives. Furthermore, adverse weather conditions, such as high precipitation rates, may unfavorably affect the already delicate balance between operations and safety. Geotechnical, weather and production parameters should be systematically monitored and evaluated in order to safely operate such pits. Appropriate data management, processing and storage are critical to ensure timely and informed decisions. This paper presents an integrated data management system which was developed over a number of years as well as the advantages through a specific application. The presented case study illustrates how the high production slopes of a mine that exceed depths of 100-120 m were successfully mined with an average displacement rate of 10- 20 mm/day, approaching an almost slow to moderate landslide velocity. Monitoring data of the past four years are included in the database and can be analyzed to produce valuable results. Time-series data correlations of movements, precipitation records, etc. are evaluated and presented in this case study. The results can be used to successfully manage mine operations and ensure the safety of the mine and the workforce.

  19. INVESTIGATION OF GEOTECHNICAL SPECIFICATIONS OF SAND DUNE SOIL: A CASE STUDY AROUND BAIJI IN IRAQ

    Directory of Open Access Journals (Sweden)

    Abbas J. Al-Taie

    2013-11-01

    Full Text Available ABSTRACT: While more than half the land surface of Iraq consists of deserts covered mainly with sand dunes, little research has taken place to study the characteristics and the behavior of dune soils. This paper directed toward studying the geotechnical properties of dune sands taken from Baiji city (northwest of Iraq. A vast laboratory testing program was carried out to achieve the purpose of this paper. The physical tests, chemical tests, X-ray diffraction analysis, permeability test, compaction characteristics, compressibility and collapsibility tests; and shear strength tests were included in this program. The results indicate that soil of Baiji sand dune exhibits prefer engineering properties according to their state. As such, this soil is considered suitable for use in geotechnical constructions. ABSTRAK: Walaupun lebih separuh daripada bumi Iraq terdiri daripada gurun yang dipenuhi dengan bukit-bukit pasir, tidak banyak penyelidikan dijalankan untuk mengkaji sifat-sifat dan ciri-ciri tanah pasir  tersebut. Kertas kerja ini menyelidik sifat geoteknikal bukit pasir yang diambil dari pekan Baiji (di bahagian barat utara Iraq.  Program penyelidikan makmal yang menyeluruh telah  dijalankan bagi mencapai objektif kajian ini. Ujian fizikal, ujian kimia, analisis belauan sinar-x, ujian kebolehtelapan, ciri pemadatan, faktor ketermampatan, ujian keruntuhan dan ujian kekuatan ricih diambilkira dalam program ini. Keputusan menunjukkan bahawa tanih bukit pasir Baiji mengutamakan ciri kejuruteraan berdasarkan keadaannya. Oleh itu, tanah ini dianggap sesuai untuk kegunaan pembinaan geoteknikal.

  20. Correlation of Resistivity Value with Geotechnical N-Value of Sedimentary Area in Nusajaya, Johor, Malaysia

    Science.gov (United States)

    Akip Tan, S. N. Mohd; Edy Tonnizam, M.; Saad, R.; Dan, M. F. Md; Nordiana, M. M.; Hazreek, Z. A. M.; Madun, A.

    2018-04-01

    Electrical resistivity survey and the geotechnical SPT blow counts (N-value) were carried out simultaneously on the tropically weathered sedimentary rock mass for an excavation project at Nusajaya, Johor, Malaysia. This study aims to determine subsurface profile by using 2D-resistivity methods and correlate with N-value derived from boring works. Four boreholes were investigated in five survey lines that revealed the site is underlain by moderately to completely weathered sandstone, clay, silt and shale. Data analysis from 2D-resistivity image shows that zones with high resistivity value generally have high N-value, and vice versa. Five zones have inversed the proportional relation between N-value and resistivity Ωm value due to different types of soil lithology. It indicates that 2D-resistivity is significance to detect bodies of anomalous materials or estimating the depth of bedrock. As a conclusion, the integration of geophysical and geotechnical analysis provides a promise approach to understand some relationship concerning the subsurface subsurface ground through the combination of 2D-resistivity and N-value.