WorldWideScience

Sample records for campestris pv viticola

  1. Hospedeiros alternativos de Xanthomonas campestris pv. viticola Alternative hosts of Xanthomonas campestris pv. viticola

    OpenAIRE

    Ana Rosa Peixoto; Rosa L.R. Mariano; José Osmã T. Moreira; Ivanise O. Viana

    2007-01-01

    Xanthomonas campestris pv. viticola (Xcv), que causa o cancro bacteriano da videira, sobrevive em plantas infectadas, epifiticamente em órgãos da parte aérea e pode ser veiculada em mudas e/ou bacelos infectados. O trabalho teve como objetivo investigar possíveis hospedeiros alternativos do patógeno, visando fornecer subsídios para o manejo da doença. A partir das plantas invasoras Alternanthera tenella, Amaranthus sp., Glycine sp. e Senna obtusifolia com sintomas similares aos do cancro bact...

  2. Hospedeiros alternativos de Xanthomonas campestris pv. viticola Alternative hosts of Xanthomonas campestris pv. viticola

    Directory of Open Access Journals (Sweden)

    Ana Rosa Peixoto

    2007-04-01

    Full Text Available Xanthomonas campestris pv. viticola (Xcv, que causa o cancro bacteriano da videira, sobrevive em plantas infectadas, epifiticamente em órgãos da parte aérea e pode ser veiculada em mudas e/ou bacelos infectados. O trabalho teve como objetivo investigar possíveis hospedeiros alternativos do patógeno, visando fornecer subsídios para o manejo da doença. A partir das plantas invasoras Alternanthera tenella, Amaranthus sp., Glycine sp. e Senna obtusifolia com sintomas similares aos do cancro bacteriano da videira, coletadas em parreirais de Juazeiro e Petrolina, no Submédio São Francisco, foram isoladas bactérias semelhantes a Xcv. No entanto, nenhuma bactéria foi isolada de plantas de Commelina benghalensis e Azadirachta indica com sintomas semelhantes. A patogenicidade dos isolados bacterianos obtidos foi confirmada em plantas de A. tenella, Amaranthus sp., Glycine sp., S. obtusifolia e em mudas de videira cv. Red Globe, em condições de casa de vegetação. As plantas invasoras Chamaesyce hirta, Dactyloctenium aegyptium, Eragrostis pilosa e Pilea sp., inoculadas artificialmente com os isolados Xcv1 e UnB1216, também desenvolveram sintomas típicos do cancro bacteriano.Xanthomonas campestris pv. viticola (Xcv, which causes the bacterial canker of grapevine, survives in infected plants as an epiphyte on aerial plant parts and may be carried in infected transplants and/or cuttings. This study was performed to investigate putative alternative hosts of the pathogen, aiming to find support for disease management. Bacteria similar to Xcv were isolated from the weeds Alternanthera tenella, Amaranthus sp., Glycine sp. and Senna obtusifolia showing canker-like symptoms and collected in vineyards of Juazeiro and Petrolina at the Submédio São Francisco. No bacteria were isolated from Commelina benghalensis and Azadirachta indica showing similar symptoms. The pathogenicity of the isolates was confirmed in plants of A. tenella, Amaranthus sp

  3. Meio semi-seletivo para isolamento de Xanthomonas campestris pv. viticola

    OpenAIRE

    Peixoto Ana Rosa; Mariano Rosa de Lima Ramos; Viana Ivanise de Oliveira

    2006-01-01

    O cancro bacteriano causado por Xanthomonas campestris pv. viticola é a fitobacteriose mais importante da videira no Submédio São Francisco. O isolamento de X. campestris pv. viticola de tecidos vegetais infectados é dificultado pela presença de contaminantes bacterianos, entre os quais Microbacterium barkeri. Objetivando-se a formulação de meio de cultura semi-seletivo, 22 isolados de X. campestris pv. viticola foram testados com relação a 30 antibióticos. O meio semi-seletivo NYDAM (extrato...

  4. Meio semi-seletivo para isolamento de Xanthomonas campestris pv. viticola

    Directory of Open Access Journals (Sweden)

    Peixoto Ana Rosa

    2006-01-01

    Full Text Available O cancro bacteriano causado por Xanthomonas campestris pv. viticola é a fitobacteriose mais importante da videira no Submédio São Francisco. O isolamento de X. campestris pv. viticola de tecidos vegetais infectados é dificultado pela presença de contaminantes bacterianos, entre os quais Microbacterium barkeri. Objetivando-se a formulação de meio de cultura semi-seletivo, 22 isolados de X. campestris pv. viticola foram testados com relação a 30 antibióticos. O meio semi-seletivo NYDAM (extrato de carne 3, peptona 5, glicose 10, extrato de levedura 5, ágar 18 e ampicilina 0,1 em g L-1 inibiu M. barkeri e bactérias fitopatogênicas podendo ser utilizado para isolar X. campestris pv. viticola de hospedeiros com infecção natural em campo.

  5. Limpeza clonal de mudas de videira infectadas por Xanthomonas campestris pv. viticola Clonal cleaning of grapevine plants infected by Xanthomonas campestris pv. viticola

    OpenAIRE

    Adriano Márcio Freire Silva; Natoniel Franklin de Melo; Elineide Barbosa de Souza; Ângela Katiusia Coelho; Rosa de Lima Ramos Mariano

    2013-01-01

    O cancro bacteriano da videira é causado por Xanthomonas campestris pv. viticola (Xcv). Visando à limpeza clonal de mudas de 'Red Globe', foram estudados: tamanho ideal de ápices e gemas axilares para cultivo em meio de Galzy modificado (MGM); efeito da termoterapia (38ºC/30 dias); e ação de antibióticos na eliminação de Xcv em videiras infectadas. Os percentuais de contaminação por Xcv e de regeneração foram analisados, e as plantas obtidas foram indexadas em meio ágar nutritivo-dextrose-ext...

  6. Identificação de potenciais plantas hospedeiras alternativas de Xanthomonas campestris pv. viticola

    OpenAIRE

    Morgana Mateus Santos; Ana Rosa Peixoto; Esmailly de Sousa Pessoa; Marco Aurélio Gama; Rosa de Lima Ramos Mariano; Maria Angélica Guimarães Barbosa; Cristiane Domingos da Paz

    2014-01-01

    Este estudo teve como objetivo identificar possíveis hospedeiras alternativas de Xanthomonas campestris pv. viticola (Xcv), visando a fornecer subsídios para o manejo do cancro bacteriano da videira. Vinte e seis espécies vegetais foram inoculadas artificialmente com o isolado Xcv3 e mantidas em condições de casa de vegetação, sendo avaliada a evolução sintomatológica da doença, como manchas necróticas angulares e lesões nas nervuras. O Xcv3 foi reisolado a partir de cada hospedeiro alternati...

  7. Sobrevivência de Xanthomonas campestris pv. viticola em tecido infectado de videira

    OpenAIRE

    Adriano Márcio Freire Silva; Erianne Fonseca de Menezes; Elineide Barbosa de Souza; Natoniel Franklin de Melo; Rosa de Lima Ramos Mariano

    2012-01-01

    Tecidos de plantas infectados constituem uma importante fonte de inóculo primário para fitobacterioses. O objetivo deste trabalho foi investigar a sobrevivência de Xanthomonas campestris pv. viticola (Xcv), agente do cancro bacteriano da videira, em tecidos infectados na superfície do solo e durante a compostagem de restos de poda. Mudas de videira 'Festival' foram inoculadas com mutante resistente à rifampicina Xcv2Rif e mantidas em casa de vegetação até apresentarem alta severidade da doenç...

  8. Limpeza clonal de mudas de videira infectadas por Xanthomonas campestris pv. viticola

    OpenAIRE

    Adriano Márcio Freire Silva; Natoniel Franklin de Melo; Elineide Barbosa de Souza; Ângela Katiusia Coelho; Rosa de Lima Ramos Mariano

    2013-01-01

    O cancro bacteriano da videira é causado por Xanthomonas campestris pv. viticola (Xcv). Visando à limpeza clonal de mudas de 'Red Globe', foram estudados: tamanho ideal de ápices e gemas axilares para cultivo em meio de Galzy modificado (MGM); efeito da termoterapia (38ºC/30 dias); e ação de antibióticos na eliminação de Xcv em videiras infectadas. Os percentuais de contaminação por Xcv e de regeneração foram analisados, e as plantas obtidas foram indexadas em meio ágar nutritivo-dextrose-ext...

  9. Limpeza clonal de mudas de videira infectadas por Xanthomonas campestris pv. viticola Clonal cleaning of grapevine plants infected by Xanthomonas campestris pv. viticola

    Directory of Open Access Journals (Sweden)

    Adriano Márcio Freire Silva

    2013-03-01

    Full Text Available O cancro bacteriano da videira é causado por Xanthomonas campestris pv. viticola (Xcv. Visando à limpeza clonal de mudas de 'Red Globe', foram estudados: tamanho ideal de ápices e gemas axilares para cultivo em meio de Galzy modificado (MGM; efeito da termoterapia (38ºC/30 dias; e ação de antibióticos na eliminação de Xcv em videiras infectadas. Os percentuais de contaminação por Xcv e de regeneração foram analisados, e as plantas obtidas foram indexadas em meio ágar nutritivo-dextrose-extrato de levedura-ampicilina (NYDAM, seguindo-se teste de patogenicidade. O cultivo de explantes com 3 mm possibilitou a obtenção de plantas livres da bactéria, com regeneração 14,3 vezes maior que explantes com 1 mm. A termoterapia de mudas infectadas, associada ao cultivo in vitro, não eliminou o patógeno. O cultivo de explantes com 10 mm, durante 40 dias em MGM + cefotaxima (300 mg L-1, proporcionou limpeza clonal das mudas. A indexação de plantas de videira regeneradas in vitro, quanto à infecção por Xcv utilizando NYDAM, seguida de teste de patogenicidade, é uma alternativa econômica e eficiente para produção de mudas de alta qualidade fitossanitária.Bacterial canker is caused by Xanthomonas campestris pv. viticola (Xcv. In order to eliminate Xcv from 'Red Globe' plants it was studied: optimal size of meristem tips and axillary buds for cultivation in modified Galzy's medium (MGM; effects of thermotherapy (38ºC/30 days; and action of antibiotics in the elimination of Xcv in infected grapevines. The percentages of contamination by Xcv and regeneration were analyzed and plants obtained were indexed using the semi-selective culture medium nutrient agar-dextrose-yeast extract-ampicilin (NYDAM followed by a pathogenicity test. The cultivation of 3 mm explants permitted to obtain plants free of bacteria with regeneration 14.3 times higher than 1 mm explants. The thermotherapy of infected plants associated to the in vitro culture

  10. Produção e caracterização de anticorpos policlonais contra Xanthomonas campestris pv. viticola Production and characterization of polyclonal antibodies against Xanthomonas campestris pv. viticola

    OpenAIRE

    João Sebastião de Paula Araujo; Fábio Bueno dos Reis Junior; Geraldo Baeta Cruz; Bruno Cardoso de Oliveira; Charles Frederick Robbs; Raul de Lucena Duarte Ribeiro; José Carlos Polidoro

    2005-01-01

    O objetivo deste trabalho foi a produção de anticorpos policlonais contra Xanthomonas campestris pv. viticola e sua caracterização pelo método Elisa indireto. Os resultados apontaram a qualidade dos anticorpos policlonais produzidos, os quais mostraram-se altamente reativos e específicos para o patovar com potencial para ser empregado no diagnóstico da doença e em programas de certificação.The objective of this work was to produce polyclonal antibodies against Xanthomonas campestris pv. vitic...

  11. Molecular characterization of Brazilian strains of Xanthomonas campestris pv. viticola by rep-PCR fingerprinting Caracterização molecular de isolados brasileiros de Xanthomonas campestris pv. viticola através de rep-PCR

    OpenAIRE

    Loiselene C. Trindade; Mirtes F Lima; Marisa A.S.V. Ferreira

    2005-01-01

    Bacterial canker of grapevine (Vitis vinifera), caused by Xanthomonas campestris pv. viticola was first detected in Brazil in 1998, affecting grapevines in the São Francisco river basin, state of Pernambuco. The disease was also reported in Juazeiro, Bahia and later in Piauí and Ceará. Due to its limited geographical distribution and relatively recent detection in Brazil, very little is known about the pathogen's biology and diversity. Repetitive DNA based-PCR (rep-PCR) profiles were generate...

  12. Molecular characterization of Brazilian strains of Xanthomonas campestris pv. viticola by rep-PCR fingerprinting Caracterização molecular de isolados brasileiros de Xanthomonas campestris pv. viticola através de rep-PCR

    Directory of Open Access Journals (Sweden)

    Loiselene C. Trindade

    2005-02-01

    Full Text Available Bacterial canker of grapevine (Vitis vinifera, caused by Xanthomonas campestris pv. viticola was first detected in Brazil in 1998, affecting grapevines in the São Francisco river basin, state of Pernambuco. The disease was also reported in Juazeiro, Bahia and later in Piauí and Ceará. Due to its limited geographical distribution and relatively recent detection in Brazil, very little is known about the pathogen's biology and diversity. Repetitive DNA based-PCR (rep-PCR profiles were generated from purified bacterial DNA of 40 field strains of X. campestris pv. viticola, collected between 1998 and 2001 in the states of Pernambuco, Bahia and Piauí. Combined analysis of the PCR patterns obtained with primers REP, ERIC and BOX, showed a high degree of similarity among Brazilian strains and the Indian type strain NCPPB 2475. Similar genomic patterns with several diagnostic bands, present in all strains, could be detected. Fingerprints were distinct from those of strains representing other pathovars and from a yellow non-pathogenic isolate from grape leaves. The polymorphism observed among the Brazilian strains allowed their separation into five subgroups, although with no correlation with cultivar of origin, geographic location or year collected.O cancro bacteriano da videira (Vitis vinifera, causado por Xanthomonas campestris pv. viticola, foi primeiramente detectado no Brasil em 1998, em parreirais no município de Petrolina, Vale do São Francisco, Pernambuco. A doença foi também observada em Juazeiro, Bahia, e mais tarde nos estados de Piauí e Ceará. Devido à sua limitada distribuição geográfica e relativamente recente detecção no Brasil, pouco se conhece sobre a biologia e diversidade do patógeno. Padrões genômicos de rep-PCR foram gerados a partir do DNA purificado de 40 isolados de X. campestris pv. viticola, coletados entre 1998 e 2001, em diferentes localidades dos estados de Pernambuco, Bahia e Piauí. A análise combinada

  13. Reação de clones de videira a Xanthomonas campestris pv. viticola, baseada nos componentes epidemiológicos do cancro bacteriano Reaction of grapevine clones to Xanthomonas campestris pv. viticola, based on epidemiological components of bacterial canker

    OpenAIRE

    Ana Rosa Peixoto Nascimento; Sami Jorge Michereff; Rosa de Lima Ramos Mariano; Ivanise Oliveira Viana

    2006-01-01

    O cancro bacteriano, causado por Xanthomonas campestris pv. viticola (Xcv), é a doença bacteriana mais importante da videira na região do Submédio São Francisco. A reação de 20 clones de videira, sendo 13 de copa e sete de porta-enxerto, foi avaliada quanto à resistência ao patógeno, em casa de vegetação. As plantas foram inoculadas com a suspensão do isolado Xcv1 (A570=108UFC mL-1), incubadas em casa de vegetação e observadas diariamente quanto aos componentes epidemiológicos do cancro bacte...

  14. Métodos de preservação e crescimento de Xanthomonas campestris pv. viticola em meio de cultura variando temperatura, pH e concentração de NaCl Preservation methods and growth of Xanthomonas campestris pv. viticola in culture medium varying temperature, pH and NaCl concentration

    OpenAIRE

    Ana R. P. Nascimento; Rosa L.R. Mariano; Marco A. S. Gama

    2005-01-01

    A bactéria fitopatogênica Xanthomonas campestris pv. viticola (Xcv) causa o cancro bacteriano da videira (Vitis vinifera), que ocasiona grandes prejuízos à viticultura no Brasil. Os métodos de dessecação em papel de filtro (DPF), repicagens periódicas (RP), água destilada esterilizada (ADE) e folhas herborizadas (FH) foram utilizados para preservar duas estirpes de Xcv durante 12 meses. As variáveis viabilidade e patogenicidade foram avaliadas mensalmente e estimadas pela obtenção de crescime...

  15. Occurrence of Xanthomonas campestris pv. campestris (Pammel, 1895 Dowson 1939, on Brassicas in Montenegro

    Directory of Open Access Journals (Sweden)

    Dragana Radunović

    2012-01-01

    Full Text Available Brassicas form the most important group of vegetable crops in Montenegro. The cabbage(Brassica oleracea var. capitata is most commonly grown, although other brassicas,particularly kale, Brussels sprout, cauliflower and broccoli, have been increasingly producedsince recently. One of the specialties of vegetable production in Montenegro is growing ofcollard (Brassica oleracea var. acephala, which is the simplest variety of the Brassica oleraceaspecies and in the nearest relation with their wild ancestor – the sylvestris variety.Diseases are the main restrictive factors for successful production of these vegetables.Susceptibility of the cultivars and inadequate control often result in more or less damagedcrops in some plots.Causal agents of brassica diseases, especially bacterial, have not been investigated inMontenegro until 2009. Since the symptoms observed in 2009 were „V” shaped leaf edgenecrosis and black rot of vascular tissue, it was assumed that they were caused by plantpathogenic bacterium Xanthomonas campestris pv. campestris.Samples of the infected plants were collected from different localities in Montenegro.Isolation and identification of the bacterium were performed using laboratory methodsaccording to Schaad (1980, Lelliott and Stead (1987 and Arsenijević (1997. Examinationof chosen bacterial isolates was conducted using both, classical bacteriological methods(examination of their pathogenic, morphological, cultivation and biochemical and physiologicalcharacteristics, and ELISA test.The obtained results confirmed the presence of X.campestris pv. campestris (Pammel,1895 Dowson 1939, on cabbage, kale, broccoli and collard in Montenegro. This is the firstexperimental evidence that collard is the host of X. campestris pv. campestris in Montenegro.

  16. Especificidade de hospedeiro nas interações Xanthomonas campestris pv. campestris - brássicas Host specificity in interaction Xanthomonas campestris pv. campestris - brassicas

    Directory of Open Access Journals (Sweden)

    Dulândula Silva Miguel-Wruck

    2010-06-01

    Full Text Available Face às escassas informações acerca da variabilidade patogênica de isolados brasileiros de Xanthomonas campestris pv. campestris, realizou-se um estudo para avaliar a especificidade patogênica de trinta e três isolados do patógeno, provenientes de várias regiões do Brasil e do exterior, a oito espécies de brássicas, através de inoculação por meio de injeção da suspensão bacteriana nas folhas. Desse total, 12 isolados foram obtidos de couve-comum (Brassica oleracea var. acephala, nove de repolho (B. oleracea var. capitata, cinco de couve-flor (B. oleracea var. botrytis, dois de canola (B. napus, um de brócolos (B. oleracea var. italica, um de couve-chinesa (B. chinensis, um de couve-rábano (B. oleracea var. gongylodes e dois de rabanete (Raphanus sativus. A avaliação da patogenicidade dos isolados da bactéria, frente aos hospedeiros em estudo, demonstrou que 14 deles não apresentaram especificidade, originando sintomas em todas as diferentes plantas inoculadas. Os 19 isolados restantes, entretanto, apresentaram relativo grau de especificidade, não causando doença em uma ou mais das plantas inoculadas.Considering the lack of information in literature about the pathogenic variability of Brazilian isolates of Xanthomonas campestris pv. campestris, a study was carried out to determine the pathogenic specificity of 33 isolates of this bacterium originated from several regions of Brazil and overseas to eight different Brassica species, through inoculation by means of injection of the bacterial suspension in leaves. From these isolates, 12 were obtained from collard greens (Brassica oleracea var. acephala, nine from cabbage (B. oleracea var. capitata, five from cauliflower (B. oleracea var. botrytis, two from canola (B. napus, one from broccoli (B. oleracea var. italica, one from Chinese cabbage (B. chinensis, one from kohlrabi (B. oleracea var. gongylodes and two from radish (Raphanus sativus. The pathogenicity of the bacterium

  17. Flower infection of Brassica oleracea with Xanthomonas campestris pv. campestris results in high levels of seed infection

    NARCIS (Netherlands)

    Wolf, van der J.M.; Zouwen, van der P.S.; Heijden, van der L.

    2013-01-01

    During seed production, Brassica seed may become infected with Xanthomonas campestris pv. campestris after systemic colonization of plants upon leaf infection, or alternatively, after flower infection. Polytunnel experiments were conducted in 2007 and 2008 to study the relative importance of these c

  18. pigB determines a diffusible factor needed for extracellular polysaccharide slime and xanthomonadin production in Xanthomonas campestris pv. campestris.

    OpenAIRE

    Poplawsky, A. R.; Chun, W.

    1997-01-01

    Seven xanthomonadin transcriptional units (pigA through pigG) were identified by transposon saturation mutagenesis within an 18.6-kbp portion of the previously identified 25.4-kbp pig region from Xanthomonas campestris pv. campestris (strain B-24). Since marker exchange mutant strains with insertions in one 3.7-kbp portion of pig could not be obtained, mutations in this region may be lethal to the bacterium. Complementation analyses with different insertion mutations further defined and confi...

  19. The role of PilZ domain proteins in the virulence of Xanthomonas campestris pv. campestris.

    Science.gov (United States)

    McCarthy, Yvonne; Ryan, Robert P; O'Donovan, Karen; He, Yong-Qiang; Jiang, Bo-Le; Feng, Jia-Xun; Tang, Ji-Liang; Dow, J Maxwell

    2008-11-01

    Cyclic di-GMP [(bis-(3'-5')-cyclic di-guanosine monophosphate)] is an almost ubiquitous second messenger in bacteria that is implicated in the regulation of a range of functions that include developmental transitions, aggregative behaviour, adhesion, biofilm formation and virulence. Comparatively little is known about the mechanism(s) by which cyclic di-GMP exerts these various regulatory effects. PilZ has been identified as a cyclic di-GMP binding protein domain; proteins with this domain are involved in regulation of specific cellular processes, including the virulence of animal pathogens. Here we have examined the role of PilZ domain proteins in virulence and the regulation of virulence factor synthesis in Xanthomonas campestris pv. campestris (Xcc), the causal agent of black rot of crucifers. The Xcc genome encodes four proteins (XC0965, XC2249, XC2317 and XC3221) that have a PilZ domain. Mutation of XC0965, XC2249 and XC3221 led to a significant reduction of virulence in Chinese radish. Mutation of XC2249 and XC3221 led to a reduction in motility whereas mutation of XC2249 and XC0965 affected extracellular enzyme production. All mutant strains were unaffected in biofilm formation in vitro. The reduction of virulence following mutation of XC3221 could not be wholly attributed to an effect on motility as mutation of pilA, which abolishes motility, has a lesser effect on virulence. PMID:19019010

  20. Establishment of an inducing medium for type III effector secretion in Xanthomonas campestris pv. campestris

    Directory of Open Access Journals (Sweden)

    Guo-Feng Jiang

    2013-09-01

    Full Text Available It is well known that the type III secretion system (T3SS and type III (T3 effectors are essential for the pathogenicity of most bacterial phytopathogens and that the expression of T3SS and T3 effectors is suppressed in rich media but induced in minimal media and plants. To facilitate in-depth studies on T3SS and T3 effectors, it is crucial to establish a medium for T3 effector expression and secretion. Xanthomonas campestris pv. campestris (Xcc is a model bacterium for studying plant-pathogen interactions. To date no medium for Xcc T3 effector secretion has been defined. Here, we compared four minimal media (MME, MMX, XVM2, and XOM2 which are reported for T3 expression induction in Xanthomonas spp. and found that MME is most efficient for expression and secretion of Xcc T3 effectors. By optimization of carbon and nitrogen sources and pH value based on MME, we established XCM1 medium, which is about 3 times stronger than MME for Xcc T3 effectors secretion. We further optimized the concentration of phosphate, calcium, and magnesium in XCM1 and found that XCM1 with a lower concentration of magnesium (renamed as XCM2 is about 10 times as efficient as XCM1 (meanwhile, about 30 times stronger than MME. Thus, we established an inducing medium XCM2 which is preferred for T3 effector secretion in Xcc.

  1. Crystal structure of the YajQ-family protein XC_3703 from Xanthomonas campestris pv. campestris.

    Science.gov (United States)

    Zhao, Zhixin; Wu, Zhen; Zhang, Jun

    2016-09-01

    As an important bacterial second messenger, bis-(3',5')-cyclic diguanylate (cyclic di-GMP or c-di-GMP) has been implicated in numerous biological activities, including biofilm formation, motility, survival and virulence. These processes are manipulated by the binding of c-di-GMP to its receptors. XC_3703 from the plant pathogen Xanthomonas campestris pv. campestris, which belongs to the YajQ family of proteins, has recently been identified as a potential c-di-GMP receptor. XC_3703, together with XC_2801, functions as a transcription factor activating virulence-related genes, which can be reversed by the binding of c-di-GMP to XC_3703. However, the structural basis of how c-di-GMP regulates XC_3703 remains elusive. In this study, the structure of XC_3703 was determined to 2.1 Å resolution using the molecular-replacement method. The structure of XC_3703 consists of two domains adopting the same topology, which is similar to that of the RNA-recognition motif (RRM). Arg65, which is conserved among the c-di-GMP-binding subfamily of the YajQ family of proteins, together with Phe80 in domain II, forms a putative c-di-GMP binding site. PMID:27599864

  2. Real time live imaging of phytopathogenic bacteria Xanthomonas campestris pv. campestris MAFF106712 in 'plant sweet home'.

    Science.gov (United States)

    Akimoto-Tomiyama, Chiharu; Furutani, Ayako; Ochiai, Hirokazu

    2014-01-01

    Xanthomonas is one of the most widespread phytobacteria, causing diseases on a variety of agricultural plants. To develop novel control techniques, knowledge of bacterial behavior inside plant cells is essential. Xanthomonas campestris pv. campestris, a vascular pathogen, is the causal agent of black rot on leaves of Brassicaceae, including Arabidopsis thaliana. Among the X. campestris pv. campestris stocks in the MAFF collection, we selected XccMAFF106712 as a model compatible pathogen for the A. thaliana reference ecotype Columbia (Col-0). Using modified green fluorescent protein (AcGFP) as a reporter, we observed real time XccMAFF106712 colonization in planta with confocal microscopy. AcGFP-expressing bacteria colonized the inside of epidermal cells and the apoplast, as well as the xylem vessels of the vasculature. In the case of the type III mutant, bacteria colonization was never detected in the xylem vessel or apoplast, though they freely enter the xylem vessel through the wound. After 9 days post inoculation with XccMAFF106712, the xylem vessel became filled with bacterial aggregates. This suggests that Xcc colonization can be divided into main four steps, (1) movement in the xylem vessel, (2) movement to the next cell, (3) adhesion to the host plant cells, and (4) formation of bacterial aggregates. The type III mutant abolished at least steps (1) and (2). Better understanding of Xcc colonization is essential for development of novel control techniques for black rot. PMID:24736478

  3. Host Genotype and Hypersensitive Reaction Influence Population Levels of Xanthomonas campestris pv. vitians in Lettuce.

    Science.gov (United States)

    Bull, Carolee T; Gebben, Samantha J; Goldman, Polly H; Trent, Mark; Hayes, Ryan J

    2015-03-01

    Dynamics of population sizes of Xanthomonas campestris pv. vitians inoculated onto or into lettuce leaves were monitored on susceptible and resistant cultivars. In general, population growth was greater for susceptible (Clemente, Salinas 88, Vista Verde) than resistant (Batavia Reine des Glaces, Iceberg, Little Gem) cultivars. When spray-inoculated or infiltrated, population levels of X. campestris pv. vitians were consistently significantly lower on Little Gem than on susceptible cultivars, while differences in the other resistant cultivars were not consistently statistically significant. Populations increased at an intermediate rate on cultivars Iceberg and Batavia Reine des Glaces. There were significant positive correlations between bacterial concentration applied and disease severity for all cultivars, but bacterial titer had a significantly greater influence on disease severity in the susceptible cultivars than in Little Gem and an intermediate influence in Iceberg and Batavia Reine des Glaces. Infiltration of X. campestris pv. vitians strains into leaves of Little Gem resulted in an incompatible reaction, whereas compatible reactions were observed in all other cultivars. It appears that the differences in the relationship between population dynamics for Little Gem and the other cultivars tested were due to the hypersensitive response in cultivar Little Gem. These findings have implications for disease management and lettuce breeding because X. campestris pv. vitians interacts differently with cultivars that differ for resistance mechanisms. PMID:25302523

  4. STANDARDIZATION OF METHODOLOGY FOR STUDYING PATHOGENECITY OF XANTHOMONAS CAMPESTRIS PV ORYZAE TO RICE

    OpenAIRE

    Jaya Bhagat*, P Shukla and PK Mishra

    2013-01-01

    Rice is the most important food crop of India and its production has increased significantly during last few years. However, Infection of Xanthomonas campestris pv. Oryzae considerably decrease its productivity. It is important to study pathogenecity of causative organism before any defense strategy is decided. Present paper deals with standardization of technology for microscopic study of pathogen.

  5. Insights into the Extracytoplasmic Stress Response of Xanthomonas campestris pv. campestris: Role and Regulation of σE-Dependent Activity ▿ ‡

    OpenAIRE

    Bordes, Patricia; Lavatine, Laure; Phok, Kounthéa; Barriot, Roland; Boulanger, Alice; Castanié-Cornet, Marie-Pierre; Déjean, Guillaume; Lauber, Emmanuelle; Becker, Anke; Arlat, Matthieu; Gutierrez, Claude

    2010-01-01

    Xanthomonas campestris pv. campestris is an epiphytic bacterium that can become a vascular pathogen responsible for black rot disease of crucifers. To adapt gene expression in response to ever-changing habitats, phytopathogenic bacteria have evolved signal transduction regulatory pathways, such as extracytoplasmic function (ECF) σ factors. The alternative sigma factor σE, encoded by rpoE, is crucial for envelope stress response and plays a role in the pathogenicity of many bacterial species. ...

  6. The influence of a modified lipopolysaccharide O-antigen on the biosynthesis of xanthan in Xanthomonas campestris pv. campestris B100

    OpenAIRE

    Steffens, Tim; Vorhölter, Frank-Jörg; Giampà, Marco; Hublik, Gerd; Pühler, Alfred; Niehaus, Karsten

    2016-01-01

    Background The exopolysaccharide xanthan is a natural product which is extensively used in industry. It is a thickening agent in many fields, from oil recovery to the food sector. Xanthan is produced by the Gram negative bacterium Xanthomonas campestris pv. campestris (Xcc). We analyzed the lipopolysaccharide (LPS) of three mutant strains of the Xcc wild type B100 to distinguish if the xanthan production can be increased when LPS biosynthesis is affected. Results The Xcc B100 O-antigen (OA) i...

  7. Promoter analysis of the Xanthomonas campestris pv. campestris gum operon directing biosynthesis of the xanthan polysaccharide.

    OpenAIRE

    Katzen, F; Becker, A.; Zorreguieta, A; Pühler, A; Ielpi, L

    1996-01-01

    The Xanthomonas campestris gum gene cluster is composed of 12 genes designated gumB, -C, -D, -E, -F, -G, -H, -I, -J, -K, -L, and -M. The transcriptional organization of this gene cluster was analyzed by the construction of gum-lacZ transcriptional fusions in association with plasmid integration mutagenesis. This analysis, coupled with primer extension assays, indicated that the gum region was mainly expressed as an operon from a promoter located upstream of the first gene, gumB.

  8. Analysis of outer membrane vesicle associated proteins isolated from the plant pathogenic bacterium Xanthomonas campestris pv. campestris

    Directory of Open Access Journals (Sweden)

    Niehaus Karsten

    2008-06-01

    Full Text Available Abstract Background Outer membrane vesicles (OMVs are released from the outer membrane of many Gram-negative bacteria. These extracellular compartments are known to transport compounds involved in cell-cell signalling as well as virulence associated proteins, e.g. the cytolysine from enterotoxic E. coli. Results We have demonstrated that Xanthomonas campestris pv. campestris (Xcc releases OMVs into the culture supernatant during growth. A proteome study identified 31 different proteins that associate with the OMV fraction of which half are virulence-associated. A comparison with the most abundant outer membrane (OM proteins revealed that some proteins are enriched in the OMV fraction. This may be connected to differences in the LPS composition between the OMVs and the OM. Furthermore, a comparison of the OMV proteomes from two different culture media indicated that the culture conditions have an impact on the protein composition. Interestingly, the proteins that are common to both culture conditions are mainly involved in virulence. Conclusion Outer membrane vesicles released from the OM of Xcc contain membrane- and virulence-associated proteins. Future experiments will prove whether these structures can serve as "vehicles" for the transport of virulence factors into the host membrane.

  9. Transcriptional reprogramming and phenotypical changes associated with growth of Xanthomonas campestris pv. campestris in cabbage xylem sap.

    Science.gov (United States)

    Dugé de Bernonville, Thomas; Noël, Laurent D; SanCristobal, Magali; Danoun, Saida; Becker, Anke; Soreau, Paul; Arlat, Matthieu; Lauber, Emmanuelle

    2014-09-01

    Xylem sap (XS) is the first environment that xylem phytopathogens meet in planta during the early infection steps. Xanthomonas campestris pv. campestris (Xcc), the causative agent of Brassicaceae black rot, colonizes the plant xylem vessels to ensure its multiplication and dissemination. Besides suppression of plant immunity, Xcc has to adapt its metabolism to exploit plant-derived nutrients present in XS. To study Xcc behaviour in the early infection steps, we used cabbage XS to analyse bacterial growth. Mineral and organic composition of XS were determined. Significant growth of Xcc in XS was allowed by the rapid catabolism of amino acids, sugars and organic acids, and it was accompanied by the formation of biofilm-like structures. Transcriptome analysis of Xcc cultivated in XS using cDNA microarrays revealed a XS-specific transcriptional reprogramming compared to minimal or rich media. More specifically, up-regulation of genes encoding transporters such as TonB-dependent transporters (TBDTs), that could be associated with nutrient acquisition and detoxification, was observed. In agreement with the aggregation phenotype, expression of genes important for twitching motility and adhesion was up-regulated in XS. Taken together, our data show specific responses of Xcc to colonization of cabbage XS that could be important for the pathogenesis process and establish XS as a model medium to study mechanisms important for the early infection events. PMID:24784488

  10. Diffusible signal factor family signals provide a fitness advantage to Xanthomonas campestris pv. campestris in interspecies competition.

    Science.gov (United States)

    Deng, Yinyue; Wu, Jien; Yin, Wenfang; Li, Peng; Zhou, Jianuan; Chen, Shaohua; He, Fei; Cai, Jun; Zhang, Lian-Hui

    2016-05-01

    Diffusible signal factor (DSF) represents a new class of widely conserved quorum sensing signals, which regulates various biological functions through intra- or interspecies signaling. The previous studies identified that there is an antagonistic interaction between Xanthomonas and Bacillus species bacteria in natural ecosystem, but the detailed molecular mechanism of interspecies competition is not clear. This study showed that Xanthomonas campestris pv. campestris (Xcc) interfered with morphological transition and sporulation of Bacillus thuringiensis in mixed cultures, whereas abrogation of the DSF synthase RpfF reduced the interference. DSF inhibited B. thuringiensis cell division and sporulation through modulation of ftsZ, which encodes an important cell division protein in bacterial cells. In addition, RpfF is essential for production of six DSF-family signals in Xcc, which employ the same signaling pathways to regulate biological functions in Xcc and play similar effects on reduction of cell division, sporulation and antibiotic resistance of B. thuringiensis. Furthermore, abrogation of RpfF decreased the competitive capability of Xcc against B. thuringiensis on the surface of Chinese cabbage leaves. Our findings provide new insights into the role of DSF-family signals in interspecies competition and depict molecular mechanisms with which Xcc competes with B. thuringiensis. PMID:26913592

  11. Antagonism of yeasts to Xanthomonas campestris pv. campestris on cabbage phylloplane in field Antagonismo de leveduras a Xanthomonas campestris pv. campestris no filoplano de repolho em condições de campo

    Directory of Open Access Journals (Sweden)

    Sayonara M.P. Assis

    1999-07-01

    Full Text Available Twenty yeast isolates, obtained from cabbage phylloplane, were evaluated for antagonistic activity against Xanthomonas campestris pv. campestris, in field. Plants of cabbage cv. Midori were pulverized simultaneously with suspensions of antagonists and pathogen. After 10 days, plants were evaluated through percentage of foliar area with lesions. Percentage of disease severity reduction (DSR% was also calculated. Yeast isolates LR32, LR42 and LR19 showed, respectively, 72, 75 and 79% of DSR. These antagonists were tested in seven different application periods in relation to pathogen inoculation (T1=4 d before; T2=simultaneously; T3=4 d after; T4=4 d before + simultaneously; T5=4 d after + simultaneously; T6=4 d before + 4 d after; T7=4 d before + simultaneously + 4 d after. The highest DSRs were showed by LR42 (71%, LR42 (67%, LR35 (69% and LR19 (68% in the treatments T7, T4, T5 and T6, which significantly differed from the others. The same yeast antagonists were also tested for black rot control using different cabbage cultivars (Fuyutoyo, Master-325, Matsukaze, Midori, Sekai I and Red Winner. The DSRs varied from 58 to 61%, and there was no significant difference among cultivars.Vinte isolados de leveduras, obtidos a partir do filoplano de repolho foram avaliados pela atividade antagônica contra Xanthomonas campestris pv. campestris, em condições de campo. Plantas de repolho cv. Midori foram pulverizadas simultaneamente com suspensões do antagonista e do patógeno. Após 10 dias, as plantas foram avaliadas através da porcentagem de área foliar infectada. A porcentagem de redução da severidade da doença (DSR%, também foi calculada. Os isolados de leveduras LR32, LR42 e LR19 apresentaram, respectivamente, 72, 75 e 79% de DSR. Estes isolados foram testados em sete diferentes períodos de aplicação dos antagonistas em relação a inoculação do patógeno. (T1=4d antes; T2=simultaneamente; T3=4 d após; T4=4 d antes + simultaneamente; T5

  12. Conformational changes associated with the binding of zinc acetate at the putative active site of XcTcmJ, a cupin from Xanthomonas campestris pv. campestris

    OpenAIRE

    Axelrod, Herbert L; Kozbial, Piotr; McMullan, Daniel; Krishna, S. Sri; Miller, Mitchell D.; Abdubek, Polat; Acosta, Claire; Astakhova, Tamara; Carlton, Dennis; Caruthers, Jonathan; Chiu, Hsiu-Ju; Clayton, Thomas; Deller, Marc C.; Duan, Lian; Elias, Ylva

    2009-01-01

    In the plant pathogen Xanthomonas campestris pv. campestris, the product of the tcmJ gene, XcTcmJ, encodes a protein belonging to the RmlC family of cupins. XcTcmJ was crystallized in a monoclinic space group (C2) in the presence of zinc acetate and the structure was determined to 1.6 Å resolution. Previously, the apo structure has been reported in the absence of any bound metal ion [Chin et al. (2006 ▶), Proteins, 65, 1046–1050]. The most significant difference between the apo structure and ...

  13. Chemical characterization of Xanthan biopolymers synthesized by Xanthomonas campestris pv pruni strains; Caracterizacao quimica de biopolimeros sintetizados por Xanthomonas campestris pv pruni

    Energy Technology Data Exchange (ETDEWEB)

    Moreira, Angelita da S.; Vendruscolo, Claire T.; Furlan, Ligia [Universidade Federal de Pelotas, RS (Brazil). Centro de Biotecnologia]. E-mail: angelita@ufpel.tche.br; claire@ufpel.tche.br; ligia@ufpel.tche.br; Galland, Griselda [Rio Grande do Sul Univ., Porto Alegre, RS (Brazil). Inst. de Qumica

    2001-07-01

    In this work we describe the characterisation of Xanthan biopolymers synthesized by two Xanthomonas campestris pv pruni strains, in aerobic fermentation. By chromatography on TLC we could notice the presence of Mannose monomer in higher proportion in the 82 strain with relation to the another ones. The viscosity results showed the temperature dependence. The 06 and 82 strains had their viscosity increased whereas for the 87 strain we could observe a reduction with temperature increasing. The {sup 13}C NMR spectrum of 87 strain showed the characteristic signals at approximately 92.8, 70.4 and 61.4 ppm, attributed to C1, C4 and C6 from glucose monomer, with higher intensity. (author)

  14. Scientific Opinion on the pest categorisation of Xanthomonas campestris pv. vesicatoria (Doidge Dye

    Directory of Open Access Journals (Sweden)

    EFSA Panel on Plant Health (PLH

    2014-06-01

    Full Text Available The European Commission requested the EFSA Panel on Plant Health to perform the pest categorisation for Xanthomonas campestris pv. vesicatoria, which is the causal agent of bacterial spot of tomato and pepper. X. campestris pv. vesicatoria is not a single taxonomic entity, and four separate species have been described:    X. vesicatoria, X. euvesicatoria, X. perforans and X. gardneri. These organisms can be accurately identified based on a range of discriminative methods. Detection methods are available for seeds. Among the four species described within X. campestris pv. vesicatoria, all except X. gardneri were reported to be present in the EU territory. The host plants (tomato and pepper are cultivated throughout Europe and conditions are conducive to disease development in open fields in southern Europe and in greenhouses. The disease causes a range of symptoms on aerial parts of plants including fruits. Contaminated seeds and transplants are responsible for long-distance dissemination of the pathogen. Control is mainly based on prevention and exclusion. Extraction of seeds from fruit debris using fermentation and acid treatments and thermotherapy treatments were shown to be effective in reducing the bacterial load in seed lots. No methods and chemical control agents are available that effectively control xanthomonads in infected crops. Although no recent data are available on economic losses caused by these pathogens in the EU, the organisms are considered important bacterial pathogens of tomato and pepper. Infections resulting in up to 30 % losses have been reported. Xanthomonads causing bacterial spot of tomato and pepper meet all criteria defined in International Standard for Phytosanitary Measures (ISPM 21 and they also meet all ISPM 11 criteria, although X. vesicatoria, X. euvesicatoria and X. perforans are present in the EU territory.

  15. Isolation of genes involved in Xanthomonas campestris pv-vesicatoria pathogenicity

    International Nuclear Information System (INIS)

    Xanthomonas campestris pv. vesicatoria is the causal agent of leaf spot on pepper and tomato. Four non-pathogenic mutants were isolated from the pathogenic strain 479/Na = after mutagenesis with NTG and UV. The mutants were screened through different pathogenicity tests. The plasmid pUFRO27 was used as a cloning vector. The genomic bank was introduced in a NGT-induced mutant by tri parental conjugation. Five clones that showed virulence response on tomato were isolated after several tests in hypocotiles. Three clones considered more aggressive were chosen after tests on seedlings and seeds. (author). 100 refs., 20 figs., 11 tabs

  16. Susceptibility of Bean Genotypes to Xanthomonas campestris pv. phaseoli in Greenhouse Conditions

    Directory of Open Access Journals (Sweden)

    Biljana Todorović

    2008-01-01

    Full Text Available Plants of 17 bean genotypes were evaluated under greenhouse conditions for their reaction to X. campestris pv. phaseoli, the causal agent of common blight of beans, following leaf-spray inoculation with bacterial suspension (108 cfu/ml. The plants were evaluated based on the number of leaf lesions, and the disease severity index (DSI was calculated.The evaluated genotypes showed various levels of susceptibility to X. campestris pv. phaseoli strain VS-1. The results of both experiments showed that the cultivar Oreol was the most resistant. The genotypes: KB 142, HR-45, Tisa and Panonski tetovac also showed low susceptibility with DSI values in the first trial ranging from 2.27 to 3.60. The same genotypes, with the exception of Panonski tetovac, were also categorized as low-susceptible to the bacterium in the second experiment, having the DSI values between 2.27 and 3.60. Most genotypes (Slavonski žutozeleni, Zlatko, Biser, Sremac, Naya Nayahit were categorized as susceptible in the first experiment, including Panonski tetovac in the second one, while the genotypes Dvadesetica, Prelom and Oplenac displayed the highest susceptibility in both trials.

  17. 40 CFR 180.1261 - Xanthomonas campestris pv. vesicatoria and Pseudomonas syringae pv. tomato specific Bacteriophages.

    Science.gov (United States)

    2010-07-01

    ... and Pseudomonas syringae pv. tomato specific Bacteriophages. 180.1261 Section 180.1261 Protection of.... vesicatoria and Pseudomonas syringae pv. tomato specific Bacteriophages. An exemption from the requirement of... syringae pv. tomato specific bacteriophages in or on pepper and tomato....

  18. Effect of alcoholic extract of guaco (Mikania glomerata) on the control of dark rot (Xanthomonas campestris pv. campestris) in cauliflower/
    Avaliação da eficácia da tintura etanólica de guaco (Mikania glomerata) no controle da podridão negra (Xanthomonas campestris pv. campestris) em couve-flor

    OpenAIRE

    Kátia Regina Freitas Schwan-Estrada; Odair José Kuhn; Roberto Luiz Portz; Gilmar Franzener; José Renato Stangarlin; Sandra Cristina Vigo-Schultz

    2006-01-01

    With the use of irrigation and new hybrids of cauliflower, it is possible to get production during all the year with hight yield. However, the crop has been affected by diseases, as the dark rot caused by X. campestris pv. campestris. The objective of this research work was to study the potential of Mikania glomerata for the control of this disease. Alcoholic extract 50 ºGL of M. glomerata was evaluated regarding to: in vitro antimicrobial activity through bacterial growth in 100, 250, 500 an...

  19. Detecção, transmissão e efeito de Xanthomonas campestris pv. campestris na qualidade fisiológica de sementes de brócolis Detection, transmission and effect of Xanthomonas campestris pv. campestris in the physiological quality of broccoli seeds

    OpenAIRE

    Nilvanira Donizeti Tebaldi; Rita de Cássia Panizzi; Rubens Sader

    2007-01-01

    A detecção, a transmissão e o efeito de Xanthomonas campestris pv. campestris (Xcc) na qualidade fisiológica de sementes de brócolis (Brassica oleracea var. italica) foram avaliados, a partir de sementes obtidas de plantas ("Baron, Flórida, Hana Midori Sakata, Precoce Piracicaba de Verão, Ramoso Santana e Sabre") inoculadas com a bactéria, em condições de campo. Para a detecção do patógeno nas sementes foram utilizados os meios de cultura semi-seletivos: SX ágar, NSCAA e BSCAA; a taxa de tran...

  20. Detecção, transmissão e efeito de Xanthomonas campestris pv. campestris na qualidade fisiológica de sementes de brócolis Detection, transmission and effect of Xanthomonas campestris pv. campestris in the physiological quality of broccoli seeds

    OpenAIRE

    Nilvanira Donizete Tebaldi; Rita de Cássia Panizzi; Rubens Sader

    2007-01-01

    A detecção, a transmissão e o efeito de Xanthomonas campestris pv. campestris (Xcc) na qualidade fisiológica de sementes de brócolis (Brassica oleracea var. italica) foram avaliadas, a partir de sementes obtidas de plantas ("Baron, Flórida, Hana Midori Sakata, Precoce Piracicaba de Verão, Ramoso Santana e Sabre") inoculadas com a bactéria, em condições de campo. Para a detecção do patógeno nas sementes foram utilizados os meios de cultura semi-seletivos: SX ágar, NSCAA e BSCAA; a taxa de tran...

  1. EVALUATION OF ANTI-BACTERIAL ACTIVITY OF LOCAL FLORA OF BUNDELKHAND REGION OF JHANSI- INDIA AGAINST PLANT PATHOGENIC BACTERIA Xanthomonas campestris pv. campestris

    Directory of Open Access Journals (Sweden)

    Sazada Siddiqui

    2014-05-01

    Full Text Available Twenty plants namely Acacia nilotica (L. Willd.ex delil, Ageratum conyzoides Linn, Boerhaavia diffusa Linn., Cynodon dactylon (L. Pers, Cleome viscosa L, Datura stramonium Linn, Euphorbia hirta Linn, Ficus benghalensis Linn, Hyptis suaveolens (Linn poit, Hibiscus rosa-sinensis Linn, Jatropha gossypifolia Linn, Phyllanthus niruri webster, Prosopis juliflora, Polyalthia longifolia, Sida cordifolia, Tephrosia purpurea (Linn. Pers, Tridax procumbens Linn, Zizyphus jujube Linn, Solanum nigrum Linn, were collected from different localities and screened for their antibacterial activity against phytopathogenic bacterium, Xanthomonas campestris pv. campestris. Among all the tested species, nine plant species viz Acacia nilotica, Ageratum conyzoied, Boerhaavia diffusa, Cleome viscose, Datura stramonium, Euphorbia hirta, Hyptis suaveolens, Hibiscus rosa sinensis, Prosopis juliflora and Tridex procumbens showed medium to light antibacterial activity against the selected pathogens. Significant antibacterial activity was observed in aqueous extracts of Prosopsis juliflora, Hyptis suaveolens, Euphorbia hirta and Acacia nilotica

  2. Pathogenicity of EPS-deficient mutants (gumB-, gumD and gumE - ) of Xanthomonas campestris pv. campestris

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Three extracellular polysaccharide (EPS) -deficient mutants of the pathogen Xanthomonas campestris pv. campestris, gumB - , gumD - and gumE- were constructed by Tn5 gusA5 mutagenesis in this study. The results of pathogenicity bioassay showed that three mutants had the obviously decreased pathogenicity on radish ( Raphanus sativus L. ) leaves. Because dead body of the bacteria still caused symptoms, it seemed that some unknown factors on the bac terial cell surface might play certain roles in the pathogenicity of the pathogen. The extracted raw EPS could lead to the chlorotic symptom on radish leaves, and its virulence was increased with the increase of EPS dosage, which suggested that EPS was a main component that caused the danage on radish leaves.

  3. Chemical characterization of Xanthan biopolymers synthesized by Xanthomonas campestris pv pruni strains

    International Nuclear Information System (INIS)

    In this work we describe the characterisation of Xanthan biopolymers synthesized by two Xanthomonas campestris pv pruni strains, in aerobic fermentation. By chromatography on TLC we could notice the presence of Mannose monomer in higher proportion in the 82 strain with relation to the another ones. The viscosity results showed the temperature dependence. The 06 and 82 strains had their viscosity increased whereas for the 87 strain we could observe a reduction with temperature increasing. The 13C NMR spectrum of 87 strain showed the characteristic signals at approximately 92.8, 70.4 and 61.4 ppm, attributed to C1, C4 and C6 from glucose monomer, with higher intensity. (author)

  4. Expression of sweet pepper Hrap gene in banana enhances resistance to Xanthomonas campestris pv. musacearum.

    Science.gov (United States)

    Tripathi, Leena; Mwaka, Henry; Tripathi, Jaindra Nath; Tushemereirwe, Wilberforce Kateera

    2010-11-01

    Banana Xanthomonas wilt (BXW), caused by the bacterium Xanthomonas campestris pv. musacearum, is the most devastating disease of banana in the Great Lakes region of Africa. The pathogen's rapid spread has threatened the livelihood of millions of Africans who rely on banana fruit for food security and income. The disease is very destructive, infecting all banana varieties, including both East African Highland bananas and exotic types of banana. In the absence of natural host plant resistance among banana cultivars, the constitutive expression of the hypersensitivity response-assisting protein (Hrap) gene from sweet pepper (Capsicum annuum) was evaluated for its ability to confer resistance to BXW. Transgenic lines expressing the Hrap gene under the regulation of the constitutive CaMV35S promoter were generated using embryogenic cell suspensions of two banana cultivars: 'Sukali Ndiizi' and 'Mpologoma'. These lines were characterized by molecular analysis, and were challenged with Xanthomonas campestris pv. musacearum to analyse the efficacy of the Hrap gene against BXW. The majority of transgenic lines (six of eight) expressing Hrap did not show any symptoms of infection after artificial inoculation of potted plants in the screenhouse, whereas control nontransgenic plants showed severe symptoms resulting in complete wilting. This study demonstrates that the constitutive expression of the sweet pepper Hrap gene in banana results in enhanced resistance to BXW. We describe the development of transgenic banana varieties resistant to BXW, which will boost the arsenal available to fight this epidemic disease and save livelihoods in the Great Lakes region of East and Central Africa. PMID:21029318

  5. Establishment of an in vitro system for studies on the induced resistance of cotton to Xanthomonas campestris pv. malvacearum Estabelecimento de sistema in vitro para estudos da resistência induzida à Xanthomonas campestris pv. malvacearum em algodoeiro

    Directory of Open Access Journals (Sweden)

    ADILSON KENJI KOBAYASHI

    2000-04-01

    Full Text Available An in vitro system for studying the resistance response of cotton (Gossypium hirsutum L. to Xanthomonas campestris pv. malvacearum was investigated. Cell suspension cultures, established from hypocotyl-derived callus of cotton cultivar 101-102B, were treated with bacterial extracellular polysaccharides (EPS extracted from the incompatible race 18 of X. campestris pv. malvacearum. EPS at 600 mug/mL caused pronounced darkening of the suspension cultures, as indicative of cell death, 48 hours after incubation. Protein electrophoresis analysis of the time course of EPS-treated cells showed differential accumulation of several protein bands after 12-24 hours. The time course of protein accumulation and cell death was consistent with an elicitor-mediated hypersensitive response.Desenvolveu-se um sistema in vitro para estudar a resistência do algodoeiro (Gossypium hirsutum L. à Xanthomonas campestris pv. malvacearum. Foram utilizados calos originados a partir de hipocótilos da cultivar de algodoeiro 101-102B para estabelecer culturas de células em suspensão, as quais foram tratadas com polissacarídeos extracelulares bacterianos (EPS extraídos da raça incompatível 18 de X. campestris pv. malvacearum. O tratamento com EPS, na concentração de 600 mig/mL, causou acentuado escurecimento das culturas em suspensão, indicativo de morte celular, 48 horas após a incubação. A análise temporal do perfil eletroforético de proteínas extraídas das células tratadas com EPS mostrou um acúmulo diferencial de diversas proteínas após 12-24 horas. O acúmulo de proteínas e a morte celular ao longo do período estudado foram consistentes com um padrão de resposta de hipersensibilidade causada por elicitores.

  6. Control of Xanthomonas campestris pv. phaseoli on Bean_Using Copper Compounds and Plant Activator

    Directory of Open Access Journals (Sweden)

    Biljana Todorović

    2006-01-01

    Full Text Available The efficacy of several new formulations of copper compounds, namely Cuprozin 35 WP (copper-oxychloride, Cuproxat (copper-sulphate, Funguran OH (copper-hydroxideand the plant activator Bion(acibenzolar-S-methyl, and their combinations with dithiocarbamates(Dithane M-70 was estimated in controlling Xanthomonas campestris pv. phaseoli (artificial inoculation in field conditions in two localities during 2006. In the locality Zemun, the efficacy of copper compounds ranged from 92.7% to 98.5%. The plant activator Bion 50 WG exhibited similar efficacy (94.4-97.1%. Combinations of Funguran OH and Dithane M-70, applied at different concentrations, also showed high efficacy (98.3-99.3%, as well as the combinations of Bion 50 WG and the other bactericides (95.5-96.8%. There was no significantdifference between the efficacies achieved by the compounds applied individually and their combinations, except Cuproxat, which exhibited decreased efficacy at lower concentration. In the locality Smederevska Palanka, the efficacy of copper compounds was 95.0-98.2%, while Bion achieved 96.8-97.7% efficacy. Combinations of copper-hydroxide(Funguran OH and dithiocarbamates (Dithane M-70 also showed high efficacy (98.1-99.4% but without a significant difference. The efficacy of combinations of Bion and copper-hydroxide, and Bion and mancozeb was 97.9-98.9%. There was no significant difference in the efficacies of the bactericides tested or the efficacies of their combinations in that locality.Our investigation confirmed high efficacy of acibenzolar-S-methyl, which was equal to the efficacy of standard bactericide treatment. This compound therefore offers a very good alternative to conventional chemicals used for controlling bacterial diseases in beans.

  7. Genome wide transcription start sites analysis of Xanthomonas campestris pv. campestris B100 with insights into the gum gene cluster directing the biosynthesis of the exopolysaccharide xanthan.

    Science.gov (United States)

    Alkhateeb, Rabeaa S; Vorhölter, Frank-Jörg; Rückert, Christian; Mentz, Almut; Wibberg, Daniel; Hublik, Gerd; Niehaus, Karsten; Pühler, Alfred

    2016-05-10

    Xanthomonas campestris pv. campestris (Xcc) is the major producer of the exopolysaccharide xanthan, the commercially most important natural polysaccharide of microbial origin. The current work provides deeper insights into the yet uncharacterized transcriptomic features of the xanthan producing strain Xcc-B100. Towards this goal, RNA sequencing of a library based on the selective enrichment of the 5' ends of native transcripts was performed. This approach resulted in the genome wide identification of 3067 transcription start sites (TSSs) that were further classified based on their genomic positions. Among them, 1545 mapped upstream of an actively transcribed CDS and 1363 were classified as novel TSSs representing antisense, internal, and TSSs belonging to previously unidentified genomic features. Analyzing the transcriptional strength of primary and antisense TSSs revealed that in some instances antisense transcription seemed to be initiated at a higher level than its sense counterpart. Mapping the exact positions of TSSs aided in the identification of promoter consensus motifs, ribosomal binding sites, and enhanced the genome annotation of 159 in silico predicted translational start (TLS) sites. The global view on length distribution of the 5' untranslated regions (5'-UTRs) deduced from the data pointed to the occurrence of leaderless transcripts and transcripts with unusually long 5'-UTRs, in addition to identifying seven putative riboswitch elements for Xcc-B100. Concerning the biosynthesis of xanthan, we focused on the transcriptional organization of the gum gene cluster. Under the conditions tested, we present evidence for a complex transcription pattern of the gum genes with multiple TSSs and an obvious considerable role of antisense transcription. The gene gumB, encoding an outer membrane xanthan exporter, is presented here as an example for genes that possessed a strong antisense TSS. PMID:26975844

  8. Detecção, transmissão e efeito de Xanthomonas campestris pv. campestris na qualidade fisiológica de sementes de brócolis Detection, transmission and effect of Xanthomonas campestris pv. campestris in the physiological quality of broccoli seeds

    Directory of Open Access Journals (Sweden)

    Nilvanira Donizete Tebaldi

    2007-09-01

    Full Text Available A detecção, a transmissão e o efeito de Xanthomonas campestris pv. campestris (Xcc na qualidade fisiológica de sementes de brócolis (Brassica oleracea var. italica foram avaliadas, a partir de sementes obtidas de plantas ("Baron, Flórida, Hana Midori Sakata, Precoce Piracicaba de Verão, Ramoso Santana e Sabre" inoculadas com a bactéria, em condições de campo. Para a detecção do patógeno nas sementes foram utilizados os meios de cultura semi-seletivos: SX ágar, NSCAA e BSCAA; a taxa de transmissão da bactéria pelas sementes às plântulas foi avaliada usando semeadura em areia e meio de cultura contido em tubo de ensaio. Para a avaliação da qualidade fisiológica das sementes foram realizados o teste padrão de germinação e os testes de vigor: envelhecimento acelerado, índice de velocidade de emergência, crescimento das plântulas e massa seca. De acordo com os resultados, o meio de cultura semi-seletivo NSCAA foi mais eficaz para detectar Xcc em sementes de brócolis; não houve diferença significativa entre os genótipos na taxa de transmissão da bactéria pelas sementes e Xcc não afetou a germinação e o vigor das sementes.The detection, transmission and the effect of Xanthomomas campestris pv. campestris (Xcc in the physiological quality of broccoli seeds were evaluated. The seeds were obtained from inoculated field plants ('Baron', 'Flórida', 'Hana Midori Sakata', 'Precoce Piracicaba de Verão', 'Ramoso Santana' and 'Sabre' genotypes with the bacterium. For the seed pathogen detection the semi-selective medium were used: starch for xanthomonads (SX agar, nutrient starch cycloheximide antibiotic agar (NSCAA and basal starch cycloheximide antibiotic agar (BSCAA; the bacteria seeds transmission percentage was evaluated using sand and test tube. The physiological seed quality was evaluated by the standard germination and vigor tests: the accelerated aging, speed of emergence, seedling growth and seedling dry weight

  9. Detecção, transmissão e efeito de Xanthomonas campestris pv. campestris na qualidade fisiológica de sementes de brócolis Detection, transmission and effect of Xanthomonas campestris pv. campestris in the physiological quality of broccoli seeds

    Directory of Open Access Journals (Sweden)

    Nilvanira Donizeti Tebaldi

    2007-12-01

    Full Text Available A detecção, a transmissão e o efeito de Xanthomonas campestris pv. campestris (Xcc na qualidade fisiológica de sementes de brócolis (Brassica oleracea var. italica foram avaliados, a partir de sementes obtidas de plantas ("Baron, Flórida, Hana Midori Sakata, Precoce Piracicaba de Verão, Ramoso Santana e Sabre" inoculadas com a bactéria, em condições de campo. Para a detecção do patógeno nas sementes foram utilizados os meios de cultura semi-seletivos: SX ágar, NSCAA e BSCAA; a taxa de transmissão da bactéria pelas sementes às plântulas foi avaliada usando semeadura em areia e meio de cultura contido em tubo de ensaio. Para a avaliação da qualidade fisiológica de sementes foram realizados o teste padrão de germinação e os testes de vigor: envelhecimento acelerado, índice de velocidade de emergência, crescimento de plântulas e massa seca. De acordo com os resultados, o meio de cultura semi-seletivo NSCAA foi mais eficaz para detectar Xcc em sementes de brócolis; não houve diferença significativa entre os genótipos na taxa de transmissão da bactéria pelas sementes e Xcc não afetou a germinação e o vigor das sementes.The detection, transmission and the effect of Xanthomomas campestris pv. campestris (Xcc in the physiological quality of broccoli seeds were evaluated. The seeds were obtained from inoculated field plants (`Baron', `Flórida', `Hana Midori Sakata', `Precoce Piracicaba de Verão', `Ramoso Santana' and `Sabre' genotypes with the bacterium. For the seed pathogen detection the semi-selective medium were used: starch for xanthomonads (SX agar, nutrient starch cycloheximide antibiotic agar (NSCAA and basal starch cycloheximide antibiotic agar (BSCAA; the bacteria seeds transmission percentage was evaluated using sand and test tube. The physiological seed quality was evaluated by the standard germination and vigor tests: the accelerated aging, speed of emergence, seedling growth and seedling dry weight. The

  10. Etude de l’implantation épiphylle de Xanthomonas campestris pv. corylina, X. campestris pv. juglandis, Erwinia herbicola et Pseudomonas paucimobilis sur feuilles de noisetier

    OpenAIRE

    PRUVOST, Olivier; Gardan, Louis

    1988-01-01

    Sur noisetier, l’étude expérimentale de la vie épiphylle d’une bactérie pathogène homologue X. c. pv. corylina, d’une bactérie pathogène hétérologue X. c. pv. juglandis et de deux bactéries saprophytes E. herbicola et P. paucimobilis a montré que seul X. c. pv. corylina se multipliait intensément et se maintenait à haut niveau (106-107 c.f.u./feuille) alors que pour les autres on ne dénombre que 103-105 c.f.u./feuille. Les observations en microscopie électronique à balayage montrent que...

  11. INDUCTION OF SYSTEMIC RESISTANCE BY BIOCONTROL AGENTS AGAINST BACTERIAL BLIGHT OF COTTON CAUSED BY XANTHOMONAS CAMPESTRIS PV. MALVACEARUM

    Directory of Open Access Journals (Sweden)

    Niranjana S. Ramachandrappa

    2013-04-01

    Full Text Available Bioagents such as Trichoderma harzianum, Pseudomonas fluorescens and Bacillus subtilis were isolated from cotton rhizosphere soil and tested individually for their effectiveness in controlling bacterial blight of cotton caused by Xanthomonas campestris pv. malvacearum (Xcm. Talc based formulations were prepared and used for seed treatment at different concentrations for assessing their ability to stimulate plant growth and to control bacterial blight disease. Among bioagents, P. fluorescens and T. harzianum proved to be effective in controlling disease under field conditions.  Other than direct action, these bioagents triggered the defense related enzymes involved in synthesis of phenols. Higher activity of peroxidase, phenylalanine ammonia-lyase, polyphenol oxidase and b-1,3-glucanase was observed in P. fluorescens and T. harzianum treated cotton plants after challenge inoculation with Xcm. Seed treatment with these bioagents enhanced the seed germination and growth parameters against blight disease and they also induced systemic resistance in plant for defense mechanisms. 

  12. Caracterização de isolados de Xanthomonas campestris pv campestris de sistemas de produção orgânico e reação de brássicas à podridão-negra Characterization of strains of Xanthomonas campestris pv campestris from organic farming systems and reaction of brassicas to black rot

    Directory of Open Access Journals (Sweden)

    Liliana Andréa dos Santos

    2008-12-01

    Full Text Available Noventa isolados de Xanthomonas campestris pv. campestris (Xcc de brássicas oriundas de sistemas de produção orgânico das Zonas da Mata e Agreste de Pernambuco foram caracterizados com base na sensibilidade a antibióticos e sulfato de cobre e atividade de esterase. A maioria apresentou alta sensibilidade à tetraciclina (76,6%, eritromicina (63,3% e estreptomicina (63,3%, resistência à amoxicilina (70%, gentamicina (40,0% e norfloxacin (45,5% e média sensibilidade (44,4% ou resistência (44,4% à neomicina. Cinqüenta e cinco isolados de Xcc foram resistentes ao sulfato de cobre na concentração de 50 mg/mL e todos foram sensíveis ao produto na concentração de 200 mg/mL. Atividade de esterase foi apresentada por 92,22% dos isolados. A análise Euclidiana por ligação simples evidenciou variabilidade entre os isolados separando-os em sete grupos de similaridade. Foi estudada também a reação de 14 cultivares de brássicas à podridão-negra, utilizando o isolado "B21" de Xcc. As cultivares diferiram significativamente entre si em relação ao período de incubação, incidência e severidade final da doença. Os maiores valores de severidade final da doença foram verificados em brócolos "Ramoso", couve-flor "Bola de Neve" e "Piracicaba de Verão", e repolho "Chato de Quintal". Os híbridos de couve-chinesa "AF 70", "AF 72", "AF 69" e "AF 66" mostraram-se altamente resistentes à doença, enquanto que brócolos "Ramoso" e "Precoce Piracicaba", couve-flor "Piracicaba de Verão" e "Híbrido Cindy" e repolho "60 Dias" foram medianamente resistentes.Ninety strains of Xanthomonas campestris pv. campestris (Xcc from brassicas grown under organic farming systems in the "Mata" and "Agreste" regions of Pernambuco, Brazil, were characterized based upon sensitivity to antibiotics and copper sulfate, and esterase activity. Most of the strains showed high sensitivity to tetracycline (76.6%, erythromycin (63.3% and streptomycin (63

  13. Transgenic expression of the rice Xa21 pattern recognition receptor in banana (Musa sp.) confers resistance to Xanthomonas campestris pv. musacearum

    OpenAIRE

    Tripathi, Jaindra Nath; Lorenzen, Jim; Bahar, Ofir; Ronald, Pamela; Tripathi, Leena

    2014-01-01

    Banana Xanthomonas wilt (BXW), caused by the bacterium Xanthomonas campestris pv. musacearum (Xcm), is the most devastating disease of banana in east and central Africa. The spread of BXW threatens the livelihood of millions of African farmers who depend on banana for food security and income. There are no commercial chemicals, bio-control agents or resistant cultivars available to control BXW. Here we take advantage of the robust resistance conferred by the rice pattern recognition receptor ...

  14. Studies on the physiological changes in the rice plants infected with Xanthomonas campestris pv. of oryzae, (4)

    International Nuclear Information System (INIS)

    The translocation and accumulation of 14C-photosynthetic assimilates in rice plants infected with Xanthomonas campestris pv. oryzae were investigated. Approximately the same quantities of assimilates were detected in healthy and infected leaves 1 day after photosynthesis, but 1.7 times as much as healthy leaves assimilates were still remained in infected leaves 7 days after photosynthesis. Much more 14C-photosynthetic assimilates were generally detected in leaf blade than in leaf sheath or in root within 1 day after photosynthesis, but detected in leaf sheath than in leaf blade later than 2 days after photosynthesis. The rates of translocation of 14C-assimilates from leaf blade to leaf sheath were lower in inoculated rice plants than in healthy ones. In both healthy and inoculated leaves of susceptible and resistant cultivars, there was a tendency that 14C-sugar contents decreased, but 14C-organic acid and -amino acid contents increased gradually after photosynthesis. Incorporation of 14C-photosynthetic assimilates into invading bacterial cells which were separated from leaf tissues by the methods of leakage and Millipore filtration was not detected immediately after photosynthesis, but became apparent 5 days after photosynthesis. The leakage of 14C-photosynthetic assimilates from leaf tissues into bathing solution was about 4 times higher in infected leaves than in healthy ones 5 days after photosynthesis, suggesting that the permeability in infected leaf tissues would increase. (author)

  15. The Xanthomonas campestris pv. vesicatoria Type-3 Effector XopB Inhibits Plant Defence Responses by Interfering with ROS Production

    Science.gov (United States)

    Priller, Johannes Peter Roman; Reid, Stephen; Konein, Patrick; Dietrich, Petra

    2016-01-01

    The bacterial pathogen Xanthomonas campestris pv. vesicatoria 85–10 (Xcv) translocates about 30 type-3 effector proteins (T3Es) into pepper plants (Capsicum annuum) to suppress plant immune responses. Among them is XopB which interferes with PTI, ETI and sugar-mediated defence responses, but the underlying molecular mechanisms and direct targets are unknown so far. Here, we examined the XopB-mediated suppression of plant defence responses in more detail. Infection of susceptible pepper plants with Xcv lacking xopB resulted in delayed symptom development compared to Xcv wild type infection concomitant with an increased formation of salicylic acid (SA) and expression of pathogenesis-related (PR) genes. Expression of xopB in Arabidopsis thaliana promoted the growth of the virulent Pseudomonas syringae pv. tomato (Pst) DC3000 strain. This was paralleled by a decreased SA-pool and a lower induction of SA-dependent PR gene expression. The expression pattern of early flg22-responsive marker genes indicated that MAPK signalling was not altered in the presence of XopB. However, XopB inhibited the flg22-triggered burst of reactive oxygen species (ROS). Consequently, the transcript accumulation of AtOXI1, a ROS-dependent marker gene, was reduced in xopB-expressing Arabidopsis plants as well as callose deposition. The lower ROS production correlated with a low level of basal and flg22-triggered expression of apoplastic peroxidases and the NADPH oxidase RBOHD. Conversely, deletion of xopB in Xcv caused a higher production of ROS in leaves of susceptible pepper plants. Together our results demonstrate that XopB modulates ROS responses and might thereby compromise plant defence. PMID:27398933

  16. The Xanthomonas campestris pv. vesicatoria Type-3 Effector XopB Inhibits Plant Defence Responses by Interfering with ROS Production.

    Directory of Open Access Journals (Sweden)

    Johannes Peter Roman Priller

    Full Text Available The bacterial pathogen Xanthomonas campestris pv. vesicatoria 85-10 (Xcv translocates about 30 type-3 effector proteins (T3Es into pepper plants (Capsicum annuum to suppress plant immune responses. Among them is XopB which interferes with PTI, ETI and sugar-mediated defence responses, but the underlying molecular mechanisms and direct targets are unknown so far. Here, we examined the XopB-mediated suppression of plant defence responses in more detail. Infection of susceptible pepper plants with Xcv lacking xopB resulted in delayed symptom development compared to Xcv wild type infection concomitant with an increased formation of salicylic acid (SA and expression of pathogenesis-related (PR genes. Expression of xopB in Arabidopsis thaliana promoted the growth of the virulent Pseudomonas syringae pv. tomato (Pst DC3000 strain. This was paralleled by a decreased SA-pool and a lower induction of SA-dependent PR gene expression. The expression pattern of early flg22-responsive marker genes indicated that MAPK signalling was not altered in the presence of XopB. However, XopB inhibited the flg22-triggered burst of reactive oxygen species (ROS. Consequently, the transcript accumulation of AtOXI1, a ROS-dependent marker gene, was reduced in xopB-expressing Arabidopsis plants as well as callose deposition. The lower ROS production correlated with a low level of basal and flg22-triggered expression of apoplastic peroxidases and the NADPH oxidase RBOHD. Conversely, deletion of xopB in Xcv caused a higher production of ROS in leaves of susceptible pepper plants. Together our results demonstrate that XopB modulates ROS responses and might thereby compromise plant defence.

  17. Effect of alcoholic extract of guaco (Mikania glomerata on the control of dark rot (Xanthomonas campestris pv. campestris in cauliflower/ Avaliação da eficácia da tintura etanólica de guaco (Mikania glomerata no controle da podridão negra (Xanthomonas campestris pv. campestris em couve-flor

    Directory of Open Access Journals (Sweden)

    Kátia Regina Freitas Schwan-Estrada

    2006-06-01

    Full Text Available With the use of irrigation and new hybrids of cauliflower, it is possible to get production during all the year with hight yield. However, the crop has been affected by diseases, as the dark rot caused by X. campestris pv. campestris. The objective of this research work was to study the potential of Mikania glomerata for the control of this disease. Alcoholic extract 50 ºGL of M. glomerata was evaluated regarding to: in vitro antimicrobial activity through bacterial growth in 100, 250, 500 and 1000 mg L-1 of the alcoholic extract; induction of local or systemic resistance in 25 days old cauliflower, with spray of alcoholic extract concomitantly and three days before the inoculation with the pathogen (water and bordeau mixture were used as control; peroxidases activity in leaves of cauliflower treated and not treated, and harvested concomitantly, 24, 48 and 72 hours after spraying the alcoholic extract and also after inoculation. The alcoholic extract of M. glomerata showed inhibition of the bacterial growth in vitro at the concentrations of 250, 500 and 1000 mg L-1. The concentrations of 500 mg L-1 and 1000 mg L-1 inhibited 24% and 38% of the bacterial growth. This inhibition could be due to antibacterial compounds in the alcoholic extract. An inhibition of the disease in vivo occurred only in the leaves treated with 100 and 500 mg L-1 of alcoholic extract when applied concomitantly with the bacteria. This result was similar to bordeau mixture, indicating a control by direct antimicrobial activity. There was no systemic resistence induction for all treatments. The peroxidases induction was due to infectious pathogen process and not to the treatments with alcoholic extract. The results indicate the potential of M. glomerata alcoholic extract for the preventive control of cauliflower dark rot disease.Com a prática da irrigação e novos híbridos de couve-flor, é possível produzir durante todo o ano e com alta produtividade. Mas, a cultura tem

  18. Multiplex PCR for specific and robust detection of Xanthomonas campestris pv. musacearum in pure culture and infected plant material

    DEFF Research Database (Denmark)

    Adriko, John; Aritua, V.; Mortensen, Carmen Nieves;

    2012-01-01

    The present study developed a pathovar-specific PCR for the detection of Xanthomonas campestris pv. musacearum (Xcm), the cause of banana xanthomonas wilt, by amplification of a 265-bp region of the gene encoding the general secretion pathway protein D (GspD). A distinct DNA fragment of the...... subsequently demonstrated in tests on artificially inoculated screenhouse cultivars of banana and field bananas with and without symptoms sampled from different parts of Uganda. This study therefore demonstrated a robust and specific Xcm diagnostic tool with the added advantage of applying internal PCR...

  19. Transgenic expression of the rice Xa21 pattern recognition receptor in banana (Musa sp.) confers resistance to Xanthomonas campestris pv. musacearum

    Science.gov (United States)

    Tripathi, Jaindra Nath; Lorenzen, Jim; Bahar, Ofir; Ronald, Pamela; Tripathi, Leena

    2014-01-01

    Summary Banana Xanthomonas wilt (BXW), caused by the bacterium Xanthomonas campestris pv. musacearum (Xcm), is the most devastating disease of banana in east and central Africa. The spread of BXW threatens the livelihood of millions of African farmers who depend on banana for food security and income. There are no commercial chemicals, bio-control agents or resistant cultivars available to control BXW. Here we take advantage of the robust resistance conferred by the rice pattern recognition receptor (PRR), XA21, to the rice pathogen Xanthomonas oryzae pv. oryzae (Xoo). We identified a set of genes required for activation of Xa21 mediated immunity (rax) that were conserved in both Xoo and Xcm. Based on the conservation, we hypothesized that intergeneric transfer of Xa21 would confer resistance to Xcm. We evaluated 25 transgenic lines of the banana cultivar ‘Gonja manjaya’ (AAB) using a rapid bioassay and 12 transgenic plants in the glass house for resistance against Xcm. About fifty percent of the transgenic lines showed complete resistance to Xcm in both assays. In contrast, all of the non-transgenic control plants showed severe symptoms that progressed to complete wilting. These results indicate that the constitutive expression of the rice Xa21 gene in banana results in enhanced resistance against Xcm. Furthermore this work demonstrates the feasibility of PRR gene transfer between monocotyledonous species and provides a valuable new tool for controlling the BXW pandemic of banana, a staple food for 100 million people in east Africa. PMID:24612254

  20. Transgenic expression of the rice Xa21 pattern-recognition receptor in banana (Musa sp.) confers resistance to Xanthomonas campestris pv. musacearum.

    Science.gov (United States)

    Tripathi, Jaindra N; Lorenzen, Jim; Bahar, Ofir; Ronald, Pamela; Tripathi, Leena

    2014-08-01

    Banana Xanthomonas wilt (BXW), caused by the bacterium Xanthomonas campestris pv. musacearum (Xcm), is the most devastating disease of banana in east and central Africa. The spread of BXW threatens the livelihood of millions of African farmers who depend on banana for food security and income. There are no commercial chemicals, biocontrol agents or resistant cultivars available to control BXW. Here, we take advantage of the robust resistance conferred by the rice pattern-recognition receptor (PRR), XA21, to the rice pathogen Xanthomonas oryzae pv. oryzae (Xoo). We identified a set of genes required for activation of Xa21-mediated immunity (rax) that were conserved in both Xoo and Xcm. Based on the conservation, we hypothesized that intergeneric transfer of Xa21 would confer resistance to Xcm. We evaluated 25 transgenic lines of the banana cultivar 'Gonja manjaya' (AAB) using a rapid bioassay and 12 transgenic lines in the glasshouse for resistance against Xcm. About 50% of the transgenic lines showed complete resistance to Xcm in both assays. In contrast, all of the nontransgenic control plants showed severe symptoms that progressed to complete wilting. These results indicate that the constitutive expression of the rice Xa21 gene in banana results in enhanced resistance against Xcm. Furthermore, this work demonstrates the feasibility of PRR gene transfer between monocotyledonous species and provides a valuable new tool for controlling the BXW pandemic of banana, a staple food for 100 million people in east Africa. PMID:24612254

  1. Seleção de genótipos de pimentão resistentes à Xanthomonas campestris pv. vesicatoria (Doidge) Dye. sob condições naturais de infecção Selection of pepper genotypes resistant to Xanthomonas campestris pv. vesicatoria (Doidge) Dye. under natural condictions of plant infection

    OpenAIRE

    Hiroshi Noda; Francisco Manoares Machado; Ayrton Luiz Urizzi Martins

    2003-01-01

    Devido à ocorrência de epidemias severas de pústula bacteriana ou mancha bacteriana no pimentão, causada pela bactéria Xanthomonas campestris pv. vesicatoria (Doidge) Dye., o cultivo do pimentão na várzea do Rio Solimões, próximo à Manaus, encontra-se em decadência. O INPA, desde 1976, desenvolve um Programa de Melhoramento Genético do Pimentão visando incorporar resistência ao patógeno. Neste trabalho são relatados os resultados obtidos em três ensaios, nas áreas de terra firme e várzea do E...

  2. Bioactivity of Several Bactericides against Xanthomonas campestris pv.citri%几种杀菌剂对柑桔溃疡病的生物活性

    Institute of Scientific and Technical Information of China (English)

    孙惠敏; 李保同; 郭明程; 陈慈相; 谢金招; 刘德力

    2011-01-01

    为筛选防治柑桔溃疡病的有效药剂,按大田推荐使用浓度,用抑菌圈法测定17种非铜药剂和5种含铜药剂对柑桔溃疡病的毒力,并研究7种非铜药剂田间防治效果.结果表明,代森锰锌、福美双、福美双·溴菌腈、农用链霉素、金核霉素和琥胶肥酸铜·乙磷铝·硫酸锌抑菌作用最强,其次为福美双·福美锌、大蒜素、络氨铜·络氨锌和盐酸吗啉胍·乙酸铜,过氧乙酸、噻唑锌、春雷菌素、中生菌素、琥珀酸铜和噻菌铜有微弱的抑菌作用,百菌清、多菌灵、苯醚甲环唑、叶青双、复硝酚钠和井冈霉素无抑菌作用.大田试验结果表明,30%金核霉素WP 500 mg/L和72%农用链霉素WP 200 mg/L处理对柑桔溃病的防效分别为76.34%和74.94%,显著优于其它药剂处理;80%代森锰锌WP 2000 mg/L、50%福美双WP 400 mg/L和50%福美双·溴菌腈WP 500 mg/L处理对柑桔溃病的防效分别为70.36%、66.55%和69.37%,与对照含铜药剂20%噻菌铜SC 67 mg/L处理无显著差异;大蒜素和叶青双对柑桔溃病防效较差,6%大蒜素EC 120 mg/L和20%叶青双WP 400 mg/L处理对柑桔溃病的防效分别为41.84%和21.82%,显著低于对照含铜药剂20%噻菌铜SC 67 mg/L处理.%In order to screen effective bactericides against Xanthomonas camprestris pv. citri, the toxicity of 17 non - copper fungicides and 5 copper fungicides against the strain of X. campestris pv. citri in the greenhouse were determined by the method of inhibition zone, and the efficacy of 7 non - copper fungicides in the field was tested. The results showed that manzoceb, thiram, thiram -bromothalonil, agricultural streptomycin, aureonucleomycin and DT -fosetyl -aluminium -zinc suffate had the strongest inhibitory effect on the pathogen, thiram- ziram, allicin, cupric tetramminosuffate- zinc tetramminosuffate and moroxydine hydrochloride- cupric acetate had relatively strong inhibitory effect, peracetic acid, Zn thiazole, Kasugamycin, Zhong

  3. 野油菜黄单胞菌反枝苋致病菌毒素的分离和结构分析%Isolation and Characterization of a Phytotoxin from Xanthomonas campestris pv. retroflexus

    Institute of Scientific and Technical Information of China (English)

    李明智; 徐凌; 孙自伶; 李永泉

    2007-01-01

    A phytotoxin from Xanthomonas campestris pv. retroflexus was isolated using a chromatographer and HPLC, and the components were identified to be a mixture of minor molecular compounds including organic acids and cyclo-(proline-phenylalanine). The greenhouse cultivation test was used to determine the influence of the isolated fractions on the growth of target weed redroot pigweed (Amaranthus retroflexus L). The experimental results demonstrated that the cyclo-(Pro-Phe) had the weed inhibit activity obviously on dicotyledonous weed and the mixture with six organic acids showed stronger bioactivity. Further, greenhouse and field test were processed, and the test showed that the use of the toxin appeared to have the potential to be developed further as a bioherbicide system to control weedy grasses.

  4. Identification of Plasmopara viticola genes potentially involved in pathogenesis on grapevine suggests new similarities between oomycetes and true fungi.

    Science.gov (United States)

    Luis, P; Gauthier, A; Trouvelot, S; Poinssot, B; Frettinger, P

    2013-10-01

    Plant diseases caused by fungi and oomycetes result in significant economic losses every year. Although phylogenetically distant, these organisms share many common features during infection. We identified genes in the oomycete Plasmopara viticola that are potentially involved in pathogenesis in grapevine by using fungal databases and degenerate primers. Fragments of P. viticola genes encoding NADH-ubiquinone oxidoreductase (PvNuo), laccase (PvLac), and invertase (PvInv) were obtained. PvNuo was overexpressed at 2 days postinoculation (dpi), during the development of the first hyphal structures and haustoria. PvLac was overexpressed at 5 dpi when genes related to pterostilbene biosynthesis were induced in grapevine. Transcript level for PvInv increased between 1 and 4 dpi before reaching a plateau. These results might suggest a finely tuned strategy of infection depending on nutrition and plant response. Phylogenetic analyses of PvNuo showed that P. viticola clustered with other oomycetes and was associated with brown algae and diatoms, forming a typical Straminipila clade. Based on the comparison of available sequences for laccases and invertases, the group formed by P. viticola and other oomycetes tended to be more closely related to Opisthokonta than to Straminipila. Convergent evolution or horizontal gene transfer could explain the presence of fungus-like genes in P. viticola. PMID:23634808

  5. The host plant metabolite glucose is the precursor of diffusible signal factor (DSF) family signals in Xanthomonas campestris.

    Science.gov (United States)

    Deng, Yinyue; Liu, Xiaoling; Wu, Ji'en; Lee, Jasmine; Chen, Shaohua; Cheng, Yingying; Zhang, Chunyan; Zhang, Lian-Hui

    2015-04-01

    Plant pathogen Xanthomonas campestris pv. campestris produces cis-11-methyl-2-dodecenoic acid (diffusible signal factor [DSF]) as a cell-cell communication signal to regulate biofilm dispersal and virulence factor production. Previous studies have demonstrated that DSF biosynthesis is dependent on the presence of RpfF, an enoyl-coenzyme A (CoA) hydratase, but the DSF synthetic mechanism and the influence of the host plant on DSF biosynthesis are still not clear. We show here that exogenous addition of host plant juice or ethanol extract to the growth medium of X. campestris pv. campestris could significantly boost DSF family signal production. It was subsequently revealed that X. campestris pv. campestris produces not only DSF but also BDSF (cis-2-dodecenoic acid) and another novel DSF family signal, which was designated DSF-II. BDSF was originally identified in Burkholderia cenocepacia to be involved in regulation of motility, biofilm formation, and virulence in B. cenocepacia. Functional analysis suggested that DSF-II plays a role equal to that of DSF in regulation of biofilm dispersion and virulence factor production in X. campestris pv. campestris. Furthermore, chromatographic separation led to identification of glucose as a specific molecule stimulating DSF family signal biosynthesis in X. campestris pv. campestris. (13)C-labeling experiments demonstrated that glucose acts as a substrate to provide a carbon element for DSF biosynthesis. The results of this study indicate that X. campestris pv. campestris could utilize a common metabolite of the host plant to enhance DSF family signal synthesis and therefore promote virulence. PMID:25681189

  6. Characterization of the GntR family regulator HpaR1 of the crucifer black rot pathogen Xanthomonas campestris pathovar campestris

    OpenAIRE

    Hui-Zhao Su; Liu Wu; Yan-Hua Qi; Guo-Fang Liu; Guang-Tao Lu; Ji-Liang Tang

    2016-01-01

    The GntR family transcription regulator HpaR1 identified from Xanthomonas campestris pv. campestris has been previously shown to positively regulate the genes responsible for hypersensitive reaction and pathogenicity and to autorepress its own expression. Here, we demonstrated that HpaR1 is a global regulator that positively regulates diverse biological processes, including xanthan polysaccharide production, extracellular enzyme activity, cell motility and tolerance to various stresses. To in...

  7. Construction of lactose-utilizing Xanthomonas campestris and production of xanthan gum from whey.

    OpenAIRE

    Fu, J F; Tseng, Y. H.

    1990-01-01

    Xanthomonas campestris pv. campestris possesses a low level of beta-galactosidase and therefore is not able to grow and produce significant amounts of xanthan gum in a medium containing lactose as the sole carbon source. In this study, a beta-galactosidase expression plasmid was constructed by ligating an X. campestris phage phi LO promoter with pKM005, a ColE1 replicon containing Escherichia coli lacZY genes and the lpp ribosome-binding site. It was then inserted into an IncP1 broad-host-ran...

  8. Protease inhibitors decrease the resistance of Vitaceae to Plasmopara viticola.

    Science.gov (United States)

    Gindro, Katia; Berger, Valentine; Godard, Sophie; Voinesco, Francine; Schnee, Sylvain; Viret, Olivier; Alonso-Villaverde, Virginia

    2012-11-01

    Plasmopara viticola must successfully infect susceptible grapevine cultivars to complete its biological cycle. In resistant grapevine varieties, P. viticola is blocked by the activation of defense mechanisms; these defense mechanisms produce hypersensitive reactions, which are related to programmed cell death. In animals, programmed cell death is dependent on caspase activities. In plants, different caspase-like proteases assume the same functions. To examine the roles of caspase-like proteases in P. viticola-grapevine interactions, three varieties of grapevine with different levels of P. viticola resistance were chosen. These grapevine varieties were treated with either PMSF, a serine protease inhibitor, or E-64, a cysteine protease inhibitor. The development of the pathogen was followed microscopically, and the plant defense reactions were estimated through stilbene quantification. Both protease inhibitor treatments increased the infection rate in the resistant and immune varieties, diminished the production of toxic stilbenes and changed the level of the plants' susceptibility to the pathogen. In particular, after either protease treatment, the cultivar that was originally immune became resistant (hyphae and haustoria were observed), the resistant cultivar reached the level of a susceptible cultivar (sporulation was observed) and the susceptible cultivar became more sensitive (P. viticola colonized the entirety of the leaf mesophyll). PMID:22906813

  9. Discrimination of Xanthomonas campestris pv. campestris races by means of Rep-PCR

    OpenAIRE

    Soengas Fernández, María del Pilar; Lema Márquez, Margarita; Cartea González, María Elena; Velasco Pazos, Pablo

    2010-01-01

    Trabajo presentado al 9th Conference of the European Foundation for Plant Pathology y al 6th Congress of the Sociedad Portuguesa de Fitopatologia celebrados en Evora (Portugal) del 15 al 18 de Noviembre de 2010.

  10. Flavonoids from Lonchocarpus campestris (Leguminosae)

    International Nuclear Information System (INIS)

    A new flavone named 3,4',5,6-tetramethoxy-[2, 3:7,8] furanoflavone besides the known flavonoids (2S,3R,4S)-3,4,5,8-tetramethoxy-[2,3:6,7]-furanoflavan, 3,6-dimethoxy-2,2-dimethylcromene-[2,3:7,8]-flavone, 3,5,6-trimethoxy-[2,3:7,8]-furanoflavone, 2,4',4,5-tetramethoxy-[2,3:6,7]-furanodihydroaurone, (2R,3S,4S)-3,4,5,6-tetramethoxy-[2,3:7,8]-furanoflavan and 3',4'-methylenedioxy-5,6-dimethoxy-[2,3:7,8]-furanoflavone were isolated from the root barks of Lonchocarpus campestris. The complete 1H and 13C NMR assignments of the new furan flavonoid was performed using 1D and 2D pulse sequences, including COSY, HMQC and HMBC experiments. (author)

  11. Cloning, purification, crystallization and preliminary X-ray analysis of XC229, a conserved hypothetical protein from Xanthomonas campestris

    Energy Technology Data Exchange (ETDEWEB)

    Chin, Ko-Hsin; Kuo, Wei-Tien [Institute of Biochemistry, National Chung-Hsing University, Taichung 40227,Taiwan (China); Chou, Chia-Cheng; Shr, Hui-Lin [Institute of Biological Chemistry, Academia Sinica, Nankang, Taipei,Taiwan (China); Core Facility for Protein Crystallography, Academia Sinica, Nankang, Taipei,Taiwan (China); Lyu, Ping-Chiang [Department of Life Science, National Tsing Hua University, Hsin-Chu,Taiwan (China); Wang, Andrew H.-J. [Institute of Biological Chemistry, Academia Sinica, Nankang, Taipei,Taiwan (China); Core Facility for Protein Crystallography, Academia Sinica, Nankang, Taipei,Taiwan (China); Chou, Shan-Ho, E-mail: shchou@nchu.edu.tw [Institute of Biochemistry, National Chung-Hsing University, Taichung 40227,Taiwan (China)

    2005-07-01

    A conserved hypothetical protein XC229 from X. campestris pv. campestris has been overexpressed in E. coli, purified and crystallized. A crystal of the purified recombinant protein diffracted to a resolution of 1.80 Å. Xanthomonas campestris pv. campestris is a Gram-negative yellow-pigmented pathogenic bacterium that causes black rot, one of the major worldwide diseases of cruciferous crops. Its genome contains approximately 4500 genes, roughly one third of which have no known structure and/or function. However, some of these unknown genes are highly conserved among several different bacterial genuses. XC229 is one such protein containing 134 amino acids. It was overexpressed in Escherichia coli, purified and crystallized using the hanging-drop vapour-diffusion method. The crystal diffracted to a resolution of at least 1.80 Å. It is cubic and belongs to space group I2{sub x}3, with unit-cell parameters a = b = c = 106.8 Å. It contains one or two molecules per asymmetric unit.

  12. Flavonoids from Lonchocarpus campestris (Leguminosae); Flavonoides de Lonchocarpus campestris (Leguminosae)

    Energy Technology Data Exchange (ETDEWEB)

    Pires, Andreza Maria L.; Silveira, Edilberto R.; Pessoa, Otilia Deusdenia L., E-mail: opessoa@ufc.b [Universidade Federal do Ceara (DQOI/UFC), Fortaleza, CE (Brazil). Dept. de Quimica Organica e Inorganica

    2011-07-01

    A new flavone named 3,4',5,6-tetramethoxy-[2'', 3'':7,8] furanoflavone besides the known flavonoids (2S,3R,4S)-3,4,5,8-tetramethoxy-[2'',3'':6,7]-furanoflavan, 3,6-dimethoxy-2'',2''-dimethylcromene-[2'',3'':7,8]-flavone, 3,5,6-trimethoxy-[2'',3'':7,8]-furanoflavone, 2,4',4,5-tetramethoxy-[2'',3'':6,7]-furanodihydroaurone, (2R,3S,4S)-3,4,5,6-tetramethoxy-[2'',3'':7,8]-furanoflavan and 3',4'-methylenedioxy-5,6-dimethoxy-[2'',3'':7,8]-furanoflavone were isolated from the root barks of Lonchocarpus campestris. The complete {sup 1}H and {sup 13}C NMR assignments of the new furan flavonoid was performed using 1D and 2D pulse sequences, including COSY, HMQC and HMBC experiments. (author)

  13. The structure of the lipooligosaccharide from Xanthomonas oryzae pv. Oryzae: the causal agent of the bacterial leaf blight in rice.

    Science.gov (United States)

    Di Lorenzo, Flaviana; Palmigiano, Angelo; Silipo, Alba; Desaki, Yoshitake; Garozzo, Domenico; Lanzetta, Rosa; Shibuya, Naoto; Molinaro, Antonio

    2016-06-01

    The structure of the lipooligosaccharide (LOS) from the rice pathogen Xanthomonas oryzae pv. oryzae has been elucidated. The characterization of the core oligosaccharide structure was obtained by the employment of two chemical degradation protocols and by analysis of the products via NMR spectroscopy. The structure of the lipid A portion was achieved by MALDI mass spectrometry analysis on purified lipid A. The LOS from Xanthomonas oryzae pv. oryzae revealed to possess the same core structure of Xanthomonas campestris pv. campestris and interesting novel features on its lipid A domain. The evaluation of the biological activity of both LOS and isolated lipid A was also executed. PMID:27085742

  14. Genetics of xanthan production in Xanthomonas campestris: the xanA and xanB genes are involved in UDP-glucose and GDP-mannose biosynthesis.

    OpenAIRE

    Köplin, R; Arnold, W.; Hötte, B; Simon, R; Wang, G; Pühler, A

    1992-01-01

    The nucleotide sequence of a 3.4-kb EcoRI-PstI DNA fragment of Xanthomonas campestris pv. campestris revealed two open reading frames, which were designated xanA and xanB. The genes xanA and xanB encode proteins of 448 amino acids (molecular weight of 48,919) and 466 amino acids (molecular weight of 50,873), respectively. These genes were identified by analyzing insertion mutants which were known to be involved in xanthan production. Specific tests for the activities of enzymes involved in th...

  15. Optimization of plant protection products treatments against Plasmopara viticola.

    Science.gov (United States)

    La Torre, A; Gianferro, M; Spera, G

    2008-01-01

    Plant protection in conventional farming, and even more so in organic farming, requires careful and prudent action agro-environmental monitoring and epidemic risk assessment. Often, however, the plant protection products are distributed in a non-targeted way, even when reduced incidence of pests do not require any treatment. In order to optimize the treatments against downy mildew, multi-annual field trials, both in conventional and organic vineyards, have been carried out. In all farms were considered 3 thesis: 1 untreated control thesis (Test), in order to follow the coarse of infection, 1 standard farm reference thesis (St), where the treatments were carried out according to the usual farm procedures and 1 experimental thesis (X). Guideline EPPO/OEPP PP 1/31 (3) have been carried out. We monitored different environmental parameters capable to influence Plasmopora viticola (Berk. and Curt.) Berl. and De Toni development. In fact by a network of RTUs (Remote Terminal Units) distributed all over the vineyards transmitting every 15 minutes via radio or via GPRS to a centralized Data Base 12 environmental parameters: time, data, precipitation, soil temperature, solar radiation, wind direction, wind speed, atmospheric relative humidity, atmospheric temperature, leaf wetness, soil humidity to cm 20 and soil humidity to cm 40. In different phenological growth stages we carried out careful disease assessments on leaves and bunches to evaluate the onset and development of P. viticola. We have studied the downy mildew infections through monitoring the environmental parameters, knowledge of P. viticola biological cycle, the evaluation of cultivar sensibility, the agricultural production method and the area characteristics, to try to optimize the anti- downy mildew treatments. The achieved results have underlined the possibility to obtain a satisfactory protection against P. viticola by correct placing of treatments. In experimental thesis (X) the number of treatments was

  16. Cloning, expression, crystallization and preliminary X-ray analysis of a putative multiple antibiotic resistance repressor protein (MarR) from Xanthomonas campestris

    International Nuclear Information System (INIS)

    A putative repressor for the multiple antibiotic resistance operon from a plant pathogen X. campestris pv. campestris has been overexpressed in E. coli, purified and crystallized. The crystals diffracted to 2.3 Å with good quality. The multiple antibiotic resistance operon (marRAB) is a member of the multidrug-resistance system. When induced, this operon enhances resistance of bacteria to a variety of medically important antibiotics, causing a serious global health problem. MarR is a marR-encoded protein that represses the transcription of the marRAB operon. Through binding with salicylate and certain antibiotics, however, MarR can derepress and activate the marRAB operon. In this report, the cloning, expression, crystallization and preliminary X-ray analysis of XC1739, a putative MarR repressor protein present in the Xanthomonas campestris pv. campestris, a Gram-negative bacterium causing major worldwide disease of cruciferous crops, are described. The XC1739 crystals diffracted to a resolution of at least 1.8 Å. They are orthorhombic and belong to space group P212121, with unit-cell parameters a = 39.5, b = 54.2 and c = 139.5 Å, respectively. They contain two molecules in the asymmetric unit from calculation of the self-rotation function

  17. Cloning, purification, crystallization and preliminary X-ray crystallographic analysis of XC847, a 3′-5′ oligoribonuclease from Xanthomonas campestris

    International Nuclear Information System (INIS)

    A DEDDh-type 3′-5′ oligoribonuclease from the plant pathogen X. campestris pv. campestris has been overexpressed in E. coli, purified and crystallized. The crystals diffracted to 2.1 Å with good quality. Oligoribonucleases are essential components of RNA and DNA metabolism and close homologues of genes encoding them are found not only in prokaryotes but also in a wide range of eukaryotes, including yeast and humans. Inactivation of the oligoribonuclease gene (orn) can result in cellular lethality. Despite their important biological function, they have been studied little from a structural point of view. In this report, the cloning, expression, crystallization and preliminary X-ray analysis of XC847, a DEDDh-type 3′-5′ oligoribonuclease from the plant pathogen Xanthomonas campestris pv. campestris, a Gram-negative bacterium causing major worldwide disease of cruciferous crops, is described. The XC847 crystals diffracted to a resolution of at least 2.1 Å. They are tetragonal and belong to space group P43212, with unit-cell parameters a = b = 67.5, c = 89.8 Å. One molecule is present per asymmetric unit

  18. Characterization of the GntR family regulator HpaR1 of the crucifer black rot pathogen Xanthomonas campestris pathovar campestris.

    Science.gov (United States)

    Su, Hui-Zhao; Wu, Liu; Qi, Yan-Hua; Liu, Guo-Fang; Lu, Guang-Tao; Tang, Ji-Liang

    2016-01-01

    The GntR family transcription regulator HpaR1 identified from Xanthomonas campestris pv. campestris has been previously shown to positively regulate the genes responsible for hypersensitive reaction and pathogenicity and to autorepress its own expression. Here, we demonstrated that HpaR1 is a global regulator that positively regulates diverse biological processes, including xanthan polysaccharide production, extracellular enzyme activity, cell motility and tolerance to various stresses. To investigate the regulatory mechanisms of HpaR1, we began with xanthan polysaccharide production, which is governed by a cluster of gum genes. These are directed by the gumB promoter. Disruption of HpaR1 significantly reduced gumB transcription and an electrophoretic mobility shift assay demonstrated that HpaR1 interacts directly with gumB promoter. DNase I footprint analysis revealed that HpaR1 and RNA polymerase were bound to the sequences extending from -21 to +10 and -41 to +29 relative to the transcription initiation site of gumB, respectively. Furthermore, in vitro transcription assays showed that HpaR1 facilitated the binding of RNA polymerase to gumB promoter, leading to an enhancement of its transcription. These results suggest that HpaR1 regulates gumB transcription via a mechanism similar but different to what was found, until now, to only be used by some MerR family transcription activators. PMID:26818230

  19. Production and release of asexual sporangia in Plasmopara viticola.

    Science.gov (United States)

    Caffi, Tito; Gilardi, Giovanna; Monchiero, Matteo; Rossi, Vittorio

    2013-01-01

    To study the influence of environmental conditions on sporulation of Plasmopara viticola lesions under vineyard's conditions, unsprayed vines were inspected every second or third day and the numbers of sporulating and nonsporulating lesions were counted in two North Italy vineyards in 2008 to 2010. Infected leaves were removed so that only fresh lesions were assessed at each field assessment. Sporulation was studied at two scales, across field assessments and across the seasonal population of lesions. Frequencies of sporulating lesions were positively correlated with the numbers of moist hours in the preceding dark period (i.e., the number of hours between 8:00 p.m. and 7:00 a.m. with relative humidity ≥80%, rainfall >0 mm, or wetness duration >30 min). In a receiver operating characteristic analysis, predicted sporulation based on the occurrence of ≥3 moist hours at night provided overall accuracy of 0.85. To study the time course of sporulation on lesions which were not washed by rainfall, numbers of sporangia produced per square millimeter of lesion were estimated on individual cohorts of lesions over the whole infectious period. The numbers of sporangia per square millimeter of lesion increased rapidly during the first 4 days after the beginning of sporulation and then tapered off prior to a halt; the time course of cumulative sporangia production by a lesion followed a monomolecular growth model (R(2) = 0.97). The total number of sporangia produced by a square millimeter of lesion increased as the maximum temperature decreased and moist hours in the dark increased. To study the release pattern of the sporangia, spore samplers were placed near grapevines with sporulating lesions. Airborne sporangia were caught in 91.2% of the days over a wide range of weather conditions, including rainless periods. The results of this study provide quantitative information on production of P. viticola sporangia that may help refine epidemiological models used as decision

  20. Phenotypic and genotypic characterization of Xanthomonas campestris strains isolated from cabbage, kale and broccoli

    Directory of Open Access Journals (Sweden)

    Popović Tatjana

    2013-01-01

    Full Text Available Thirty-six strains of Xanthomonas campestris pv. campestris (Xcc isolated from cabbage, kale and broccoli were identified according to their pathogenicity, phenotypic and genotypic characterization. Pathogenicity was confirmed by the injection method with a hypodermic syringe into the mesophilic tissue of cabbage leaves. All strains were Gramnegative, aerobic, catalase-positive, oxidase-negative, grew at 35°C, produced levan, H2S and indole, did not reduce nitrate, hydrolyzed Tween 80, starch, gelatin and esculin and did not show tolerance to 0.1 and 0.02% TTC. The strains produced acid from d-arabinose, arginine, dulcitol, galactose, d-glucose, maltose, mannose, sorbitol, sucrose and xylose. The genetic characterization was based on the sequence analyses of 16S rDNA and ERIC and BOX PCR. Strains of different pathovars were also used to compare PCR resulting patterns. BOX-PCR of the strains from kale and broccoli, obtained using (GTG5 primer, yielded patterns with a high similarity level to pathovar reference strain Xcc. The strains from cabbage yielded BOX and ERIC product patterns, distinguishing them from the other tested strains and reference strains. 16S rDNA of the representative strains was closely related to Xcc strain ATCC 33913. ERIC PCR and BOX using (GTG5 primer generated different Xcc patterns and were effective in distinguishing strains from different plant hosts. [Projekat Ministarstva nauke Republike Srbije, br. III43010 i br. III46007

  1. Geographic distribution of cryptic species of Plasmopara viticola causing downy mildew on wild and cultivated grape in eastern North America.

    Science.gov (United States)

    Rouxel, Mélanie; Mestre, Pere; Baudoin, Anton; Carisse, Odile; Delière, Laurent; Ellis, Michael A; Gadoury, David; Lu, Jiang; Nita, Mizuho; Richard-Cervera, Sylvie; Schilder, Annemiek; Wise, Alice; Delmotte, François

    2014-07-01

    The putative center of origin of Plasmopara viticola, the causal agent of grape downy mildew, is eastern North America, where it has been described on several members of the family Vitaceae (e.g., Vitis spp., Parthenocissus spp., and Ampelopsis spp.). We have completed the first large-scale sampling of P. viticola isolates across a range of wild and cultivated host species distributed throughout the above region. Sequencing results of four partial genes indicated the presence of a new P. viticola species on Vitis vulpina in Virginia, adding to the four cryptic species of P. viticola recently recorded. The phylogenetic analysis also indicated that the P. viticola species found on Parthenocissus quinquefolia in North America is identical to Plasmopara muralis in Europe. The geographic distribution and host range of five pathogen species was determined through analysis of the internal transcribed spacer polymorphism of 896 isolates of P. viticola. Among three P. viticola species found on cultivated grape, one was restricted to Vitis interspecific hybrids within the northern part of eastern North America. A second species was recovered from V. vinifera and V. labrusca, and was distributed across most of the sampled region. A third species, although less abundant, was distributed across a larger geographical range, including the southern part of eastern North America. P. viticola clade aestivalis predominated (83% of isolates) in vineyards of the European winegrape V. vinifera within the sampled area, indicating that a single pathogen species may represent the primary threat to the European host species within eastern North America. PMID:24915427

  2. Microsatellite markers for characterization of native and introduced populations of Plasmopara viticola, the causal agent of grapevine downy mildew.

    Science.gov (United States)

    Rouxel, Mélanie; Papura, Daciana; Nogueira, Marilise; Machefer, Virginie; Dezette, Damien; Richard-Cervera, Sylvie; Carrere, Sébastien; Mestre, Pere; Delmotte, François

    2012-09-01

    We reported 31 microsatellite markers that have been developed from microsatellite-enriched and direct shotgun pyrosequencing libraries of Plasmopara viticola, the causal agent of grapevine downy mildew. These markers were optimized for population genetics applications and used to characterize 96 P. viticola isolates from three European and three North American populations. PMID:22706046

  3. [Flavonoids of Artemisia campestris, ssp. glutinosa].

    Science.gov (United States)

    Hurabielle, M; Eberle, J; Paris, M

    1982-10-01

    Four flavanones (pinostrobin, pinocembrin, sakuranetin and naringenin), one dihydroflavonol (7-methyl aromadendrin) and one flavone (hispidulin) have been isolated from Artemisia campestris L. ssp. glutinosa Gay and identified by spectroscopic methods. Artemisia campestris L. sous-espèce glutinosa Gay est une Composée Anthémidée largement répandue sur les sables du littoral méditerranéean et abondante dans certaines régions d'Espagne et d'Italie. Dans le cadre d'une étude chimiotaxonomique du genre Artemisia Tourn., nous nous sommes intéressés à l'analyse des flavonoïdes, composés jamais décrits, à notre connaissance, dans cette espèce d' Artemisia. Les sommités fleuries d' Artemisia campestris sous-espèce glutinosa, séchées et pulvérisées, sont dégraissées à l'ether de pétrole et épuisées par le chloroforme. Le fractionnement de l'extrait chloroformique, par chromatographie sur colonne de silice, et la purification de certaines fractions conduisent à l'isolement de six génines flavoniques, à l'etat pur. L' étude des spectres UV, des spectres de masse et des spectres de RMN [1,2] et la comparaison avec des échantillons authentiques permettent de proposer, pour ces flavonoïdes, les structures de la pinostrobine [3], de la pinocembrine [4], de la sakuranétine, de la naringénine [5] (flavanones), de la méthyl-7-aromadendrine, [6, 7] (dihydroflavonol) et de l'hispiduline [8, 9] (flavone); quatre de ces génines sont méthylées. Parmi ces flavonoïdes, la pinostrobine n'a jamais été décrite, à notre connaissance, dans la famille des Composées; la pinocembrine, la sakuranétine et la naringénine ont déjà été signalées chez quelques Astéracées et Eupatoriées [10], et l'hispiduline dans la tribu des Anthémidées ( Santolina chamaecyparissus L.) [8]. Seule, la méthyl-7-aromadendrine semble décrite, à ce jour, dans le genre Artemisia Tourn. [7]. PMID:17396957

  4. Lentinan promotes the root of Brassica CampestrisL.

    Directory of Open Access Journals (Sweden)

    Guoyun Zhang

    2015-06-01

    Full Text Available The aim of this work was to study the effect of lentinan on Brassica campestris L (rape. Spraying on the leaves of lentinan B. campestris L. at 0.05×10-6 g ml-1 concentration significantly promoted the root elongation (P<0.05. The results for the first time showed that lentinan could prolongate roots as a new plant hormone.

  5. Effectiveness of some microorganisms in the limitation of grapevine cuttings infection by Phomopsis viticola Sacc.

    Directory of Open Access Journals (Sweden)

    Ewa Król

    2013-12-01

    Full Text Available The possibilities of using antagonistic fungi and bacteria in the limitation of grapevine stems infection by Phomopsis viticola Sacc. were studied. Trichodema koningii Oud., T.viride Persoon ex S.F.,T.harzianum Rifai, Gliocladium catenulatum Gilman and Abbott, G.fimbriatum Gilman and Abbott, Bacillus sp., Pseudomonas fluorescens and five unidentified isolates of bacteria i.e.: 22a, 35, 40, 45, 66 were estimated. It was appeared what Trichoderma spp. were the most effective in protection of grapevine stems against the infection by P.viticola. After these antagonistic fungi were used on protected grapevine canes not numerous necrosis were observed and few cultures of pathogen were reisolated from them. Moreover, Trichoderma spp. survived on the grapevine stems during the period of experiment. The abilities of other microorganisms tested to protect grapevine cuttings against P.viticola infection and to exist on the stems were less than Trichoderma spp.

  6. The acylation and phosphorylation pattern of lipid A from Xanthomonas Campestris strongly influence its ability to trigger the innate immune response in arabidopsis

    DEFF Research Database (Denmark)

    Silipo, Alba; Sturiale, Luisa; Garozzo, Domenico;

    2008-01-01

    Lipopolysaccharides (LPSs) are major components of the cell surface of Gram-negative bacteria. LPSs comprise a hydrophilic heteropolysaccharide (formed by the core oligosaccharide and the O-specific polysaccharide) that is covalently linked to the glycolipid moiety lipid A, which anchors these...... Xanthomonas campestris pv. campestris (Xcc) can elicit defense responses in the model plant Arabidopsis thaliana. Here we have extended these studies by analysis of the structure and biological activity of LPS from a nonpathogenic Xcc mutant, strain 8530. We show that this Xcc strain is defective in core...... in Arabidopsis, or to prevent the hypersensitive response (HR) that is caused by avirulent bacteria as the lipid A from the wild-type could. This suggests that Xcc has the capacity to modify the structure of the lipid A to reduce its activity as a PAMP. We speculate that such effects might occur in...

  7. PV Emulator

    OpenAIRE

    Pelin, Denis; Jukić Antolović, Jelena; Rapčan, Vjekoslav

    2014-01-01

    The photovoltaic emulator (PV emulator) described in the paper is used for laboratory exercises in the courses Renewable Energy Sources and Emergency/Standby Power Supply Systems in the Graduate (Master) Studies in Electrical Engineering – Power Systems Engineering and Principles of Power Electronics in the Undergraduate (Bachelor) Studies in Electrical Engineering as well as for scientific research relating to setting an optimal photovoltaic system for regional climatic elements. The paper g...

  8. Identification of effector genes from the phytopathogenic Oomycete Plasmopara viticola through the analysis of gene expression in germinated zoospores.

    Science.gov (United States)

    Mestre, Pere; Piron, Marie-Christine; Merdinoglu, Didier

    2012-07-01

    Grapevine downy mildew caused by the Oomycete Plasmopara viticola is one of the most important diseases affecting Vitis spp. The current strategy of control relies on chemical fungicides. An alternative to the use of fungicides is using downy mildew resistant varieties, which is cost-effective and environmentally friendly. Knowledge about the genetic basis of the resistance to P. viticola has progressed in the recent years, but little data are available about P. viticola genetics, in particular concerning the nature of its avirulence genes. Identifying pathogen effectors as putative avirulence genes is a necessary step in order to understand the biology of the interaction. It is also important in order to select the most efficient combination of resistance genes in a strategy of pyramiding. On the basis of knowledge from other Oomycetes, P. viticola effectors can be identified by using a candidate gene strategy based on data mining of genomic resources. In this paper we describe the development of Expressed Sequence Tags (ESTs) from P. viticola by creating a cDNA library from in vitro germinated zoospores and the sequencing of 1543 clones. We present 563 putative nuclear P. viticola unigenes. Sequence analysis reveals 54 ESTs from putative secreted hydrolytic enzymes and effectors, showing the suitability of this material for the analysis of the P. viticola secretome and identification of effector genes. Next generation sequencing of cDNA from in vitro germinated zoospores should result in the identification of numerous candidate avirulence genes in the grapevine/downy mildew interaction. PMID:22749169

  9. Linking Jasmonic Acid to Grapevine Resistance against the Biotrophic Oomycete Plasmopara viticola.

    Science.gov (United States)

    Guerreiro, Ana; Figueiredo, Joana; Sousa Silva, Marta; Figueiredo, Andreia

    2016-01-01

    Plant resistance to biotrophic pathogens is classically believed to be mediated through salicylic acid (SA) signaling leading to hypersensitive response followed by the establishment of Systemic Acquired Resistance. Jasmonic acid (JA) signaling has extensively been associated to the defense against necrotrophic pathogens and insects inducing the accumulation of secondary metabolites and PR proteins. Moreover, it is believed that plants infected with biotrophic fungi suppress JA-mediated responses. However, recent evidences have shown that certain biotrophic fungal species also trigger the activation of JA-mediated responses, suggesting a new role for JA in the defense against fungal biotrophs. Plasmopara viticola is a biotrophic oomycete responsible for the grapevine downy mildew, one of the most important diseases in viticulture. In this perspective, we show recent evidences of JA participation in grapevine resistance against P. viticola, outlining the hypothesis of JA involvement in the establishment of an incompatible interaction with this biotroph. We also show that in the first hours after P. viticola inoculation the levels of OPDA, JA, JA-Ile, and SA increase together with an increase of expression of genes associated to JA and SA signaling pathways. Our data suggests that, on the first hours after P. viticola inoculation, JA signaling pathway is activated and the outcomes of JA-SA interactions may be tailored in the defense response against this biotrophic pathogen. PMID:27200038

  10. The mode of host resistance to Plasmopara viticola infection of grapevines.

    Science.gov (United States)

    Yu, Ying; Zhang, Yali; Yin, Ling; Lu, Jiang

    2012-11-01

    ABSTRACT The resistance and susceptibility of grapevines to downy mildew (DM) disease caused by Plasmopara viticola were compared among different cultivars/accessions belonging to Vitis vinifera, V. rotundifolia, and 10 oriental Vitis species. After inoculation with P. viticola pathogen, no symptom was found in V. rotundifolia grapevines at all, while oriental species V. davidii and V. piasezkii, like V. vinifera, were susceptible to DM disease. The other eight oriental Vitis species showed various resistance levels to DM disease. Intraspecific resistant variations were also observed in V. amurensis. Microscopy studies were conducted on various time courses after pathogen infection on grape leaves. P. viticola hyphae were not observed in V. rotundifolia cultivars, while symptoms with varying degrees of severity were observed among the Euvitis species. In general, the DM resistant oriental species showed a slower development of hypha and less formation of haustoria than DM susceptible V. vinifera grapevines. Cells with distinctive fluorescence were observed in V. rotundifolia and the oriental species V. pseudoreticulata, and callose deposits were observed in V. rotundifolia, V. pseudoreticulata, and V. amurensis grapevines. Based on the results of morphological observations and microscopy studies, we concluded that there were five levels of grapevine resistance to P. viticola pathogen: (i) immune, (ii) extremely resistant, (iii) resistant, (iv) partly resistant, and (v) susceptible. PMID:22877313

  11. Variation within and between Vitis species for foliar resistance to the downy mildew pathogen Plasmopara viticola

    Science.gov (United States)

    To complement existing control strategies, grape growers in humid climates desire cultivars with resistance to downy mildew, caused by Plasmopara viticola. Numerous disease resistance screens of diverse Vitis germplasm have previously been conducted to identify downy mildew resistance, but ratings o...

  12. Induced polyploidization in Brassica campestris L. (Brassicaceae).

    Science.gov (United States)

    Kumar, G; Dwivedi, K

    2014-01-01

    Present experimental design has been made up to obtain crop with higher ploidy level via synthetic polyploidization. Since ploidy manipulation is generally associated with the obtainment of some increased enviable traits of the crop and also provides them greater adaptability to unfavorable or harsh circumstances as compared to its diploids counterparts. Thus, herein present research autotetraploids of Brassica campestris L. have been lucratively achieved by the application of colchicine. Two methods of treatment were utilized i.e. seed treatment and seedling treatment. No polyploidy could be obtained through seed treatment while seedling treatment responded well towards polyploidy. However, the status of autotetraploidy has been confirmed by cytomorphological investigations of treated plants as against its diploids counterparts. For the purpose, morphological parameters such as increased stomata size, pollen diameter, flower size, reproductive organs whereas reduction in plant height, leaf length, leaf breadth, stomata frequency, number of flowers/inflorescence etc. were appraised. Further, cytological observations were made that had clearly revealed the doubling of genome in the autotetraploids as compared to diploids. Meanwhile, pollen fertility and size of pollen grains were evaluated as well. PMID:24818510

  13. Laser Microdissection of Grapevine Leaves Reveals Site-Specific Regulation of Transcriptional Response to Plasmopara viticola.

    Science.gov (United States)

    Lenzi, Luisa; Caruso, Carla; Bianchedi, Pier Luigi; Pertot, Ilaria; Perazzolli, Michele

    2016-01-01

    Grapevine is one of the most important fruit crops in the world, and it is highly susceptible to downy mildew caused by the biotrophic oomycete Plasmopara viticola. Gene expression profiling has been used extensively to investigate the regulation processes of grapevine-P. viticola interaction, but all studies to date have involved the use of whole leaves. However, only a small fraction of host cells is in contact with the pathogen, so highly localized transcriptional changes of infected cells may be masked by the large portion of non-infected cells when analyzing the whole leaf. In order to understand the transcriptional regulation of the plant reaction at the sites of pathogen infection, we optimized a laser microdissection protocol and analyzed the transcriptional changes in stomata cells and surrounding areas of grapevine leaves at early stages of P. viticola infection. The results indicate that the expression levels of seven P. viticola-responsive genes were greater in microdissected cells than in whole leaves, highlighting the site-specific transcriptional regulation of the host response. The gene modulation was restricted to the stomata cells and to the surrounding areas of infected tissues, indicating that the host response is mainly located at the infection sites and that short-distance signals are implicated. In addition, due to the high sensitivity of the laser microdissection technique, significant modulations of three genes that were completely masked in the whole tissue analysis were detected. The protocol validated in this study could greatly increase the sensitivity of further transcriptomic studies of the grapevine-P. viticola interaction. PMID:26546320

  14. IscR plays a role in oxidative stress resistance and pathogenicity of a plant pathogen, Xanthomonas campestris.

    Science.gov (United States)

    Fuangthong, Mayuree; Jittawuttipoka, Thichakorn; Wisitkamol, Ratiphorn; Romsang, Adisak; Duang-nkern, Jintana; Vattanaviboon, Paiboon; Mongkolsuk, Skorn

    2015-01-01

    Iron-sulfur ([Fe-S]) cluster is an essential cofactor of proteins involved in various physiological processes including cellular defense against oxidative stress. In Xanthomonas campestris pv. campestris (Xcc), IscR plays a negative role in regulation of the transcription of [Fe-S] assembly genes, iscR-sufBCDS. The expression level of sufBCDS was up-regulated in an Xcc iscR mutant. In addition, the iscR promoter activity in an Xcc iscR mutant was also higher than the wild-type strain, indicating an autoregulatory circuit. Purified IscR was shown to bind at the iscR promoter region and three putative IscR binding sites were identified. The expression of iscR-suf operon was highly induced by oxidant treatments and iron limited conditions. The iscR mutant showed increased sensitivity toward hydrogen peroxide phenotype but, surprisingly, had hyper-resistant phenotype toward plumbagin compared to the wild-type strain. Most importantly, the iscR mutant was impaired in its ability to cause lesion on leaves of a compatible host plant, Chinese radish (Raphanus sativus). These results demonstrate that a transcription regulator gene, iscR, negatively regulates genes involved in [Fe-S] biosynthesis and plays a role in oxidative stress response and pathogenesis of Xcc. PMID:25200360

  15. Elicitation of grapevine defense responses against Plasmopara viticola, the causal agent of downy mildew

    OpenAIRE

    Selim, Moustafa

    2013-01-01

    The aim of the present study was to investigate the mechanisms of induced resistance after the application of specific elicitors (plant activators) in Vitis vinifera/Plasmopara viticola pathosystem. For this purpose phosphonate-containing elicitors, whose solo substances and a fungicide from the strobilurin group were applied on leaves of potted vines (Riesling, Müller-Thurgau, Solaris, Regent). The elicitors were used protectively and curatively. The characterization of the effect of the eli...

  16. Identification of Acremonium isolates from grapevines and evaluation of their antagonism towards Plasmopara viticola

    OpenAIRE

    Lo Piccolo, Sandra; Alfonzo, Antonio; Giambra, Selene; Conigliaro, Gaetano; López Llorca, Luis Vicente; Burruano, Santella

    2015-01-01

    Some endophytic fungal genera in Vitis vinifera, including Acremonium, have been reported as antagonists of Plasmopara viticola. Endophytic Acremonium isolates from an asymptomatic grapevine cultivar Inzolia from Italy were identified by morphological features and multigene phylogenies of ITS, 18S and 28S genes, and their intra-specific genomic diversity was analyzed by RAPD analysis. Culture filtrates (CFs) obtained from Acremonium isolates were tested in vitro for their inhibitory activity ...

  17. Analysis of selection pressure exerted on Plasmopara viticola by organically based fungicides

    OpenAIRE

    Matasci, C.L.; D. Gobbin; Stutz, Ch.; Gessler, C.

    2006-01-01

    Downy mildew is one of the most important grape diseases world-wide. The pathogen is a genetically highly diversified organism with a high capacity of adaptation. A monitoring of changes in population structure of P. viticola subjected to new copper replacing products or strategies, studied and developed within REPCO (Replacement of Copper Fungicides in Organic Production of Grapevine and Apple in Europe) is important for assessing selection pressure which could lead to a reduction of efficac...

  18. Development and application of loop-mediated isothermal amplification (LAMP) for detection of Plasmopara viticola.

    Science.gov (United States)

    Kong, Xiangjiu; Qin, Wentao; Huang, Xiaoqing; Kong, Fanfang; Schoen, Cor D; Feng, Jie; Wang, Zhongyue; Zhang, Hao

    2016-01-01

    A rapid LAMP (loop-mediated isothermal amplification) detection method was developed on the basis of the ITS sequence of P. viticola, the major causal agent of grape downy mildew. Among the 38 fungal and oomycete species tested, DNA isolated exclusively from P. viticola resulted in a specific product after LAMP amplification. This assay had high sensitivity and was able to detect the presence of less than 33 fg of genomic DNA per 25-μL reaction within 30 min. The infected leaves may produce sporangia that serve as a secondary inoculum. The developed LAMP assay is efficient for estimating the latent infection of grape leaves by P. viticola. When combined with the rapid and simple DNA extraction method, this assay's total detection time is shortened to approximately one hour; therefore it is suitable for on-site detection of latent infection in the field. The sporangia levels in the air are strongly associated with disease severity. The LAMP method was also demonstrated to be able to estimate the level of sporangia released in the air in a certain period. This assay should make disease forecasting more accurate and rapid and should be helpful in decision-making regarding the control of grape downy mildew. PMID:27363943

  19. Changes in carbohydrate metabolism in Plasmopara viticola-infected grapevine leaves.

    Science.gov (United States)

    Gamm, Magdalena; Héloir, Marie-Claire; Bligny, Richard; Vaillant-Gaveau, Nathalie; Trouvelot, Sophie; Alcaraz, Gérard; Frettinger, Patrick; Clément, Christophe; Pugin, Alain; Wendehenne, David; Adrian, Marielle

    2011-09-01

    The oomycete Plasmopara viticola is responsible for downy mildew, a severe grapevine disease. In infected grapevine leaves, we have observed an abnormal starch accumulation at the end of the dark period, suggesting modifications in starch metabolism. Therefore, several complementary approaches, including transcriptomic analyses, measurements of enzyme activities, and sugar quantification, were performed in order to investigate and to understand the effects of P. viticola infection on leaf starch and-to a larger extent-carbohydrate metabolism. Our results indicate that starch accumulation is associated with an increase in ADP-glucose pyrophosphorylase (AGPase) activity and modifications in the starch degradation pathway, especially an increased α-amylase activity. Together with these alterations in starch metabolism, we have observed an accumulation of hexoses, an increase in invertase activity, and a reduction of photosynthesis, indicating a source-to-sink transition in infected leaf tissue. Additionally, we have measured an accumulation of the disaccharide trehalose correlated to an increased trehalase gene expression and enzyme activity. Altogether, these results highlight a dramatic alteration of carbohydrate metabolism correlated with later stages of P. viticola development in leaves. PMID:21649510

  20. Influence of constitutive phenolic compounds on the response of grapevine (Vitis vinifera L.) leaves to infection by Plasmopara viticola.

    Science.gov (United States)

    Latouche, Gwendal; Bellow, Sébastien; Poutaraud, Anne; Meyer, Sylvie; Cerovic, Zoran G

    2013-01-01

    Flavonols and hydroxycinnamic acids are known to contribute to plant resistance against pathogens, but there are few reports on the implication of flavonols in the resistance of grapevine against Plasmopara viticola, and none on the involvement of hydroxycinnamic acids. In order to analyze the effect of flavonols on P. viticola infection, variable amounts of flavonols were induced by different light conditions in otherwise phenologically identical leaves. Differences in content of leaf hydroxycinnamic acids were induced at the same time. A non-invasive monitoring of flavonols and hydroxycinnamic acids was performed with Dualex leaf-clip optical sensors. Whatever the light condition, there were no significant changes in flavonol or in hydroxycinnamic acid contents for control and inoculated leaves during the development of P. viticola until 6 days after inoculation. The violet-blue autofluorescence of stilbenes, the main phytoalexins of grapevine that accumulate in inoculated leaves, was used as an indicator of infection by P. viticola. The implication of leaf constitutive flavonols and hydroxycinnamic acids in the defence of Vitis vinifera against P. viticola could be investigated in vivo thanks to this indicator. The increase in stilbene violet-blue autofluorescence started earlier for leaves with low flavonol content than for leaves with higher content, suggesting that constitutive flavonols are able to slow down the infection by P. viticola. On the contrary, constitutive hydroxycinnamic acids did not seem to play a role in defence against P. viticola. The non-destructive nature of the methods used alleviates the major problem of destructive experiments: the large variability in leaf phenolic contents. PMID:23080015

  1. Interactions of Meloidogyne incognita, Xanthomonas campestris, and Rhizobium sp. in the disease complex of chickpea

    OpenAIRE

    SIDDIQUI, Zaki Anwar; FATIMA, Munavvar; ALAM, Subha

    2013-01-01

    The effects of Meloidogyne incognita, Xanthomonas campestris, and Rhizobium sp., alone or in combination, on the disease complex in chickpea were examined. Individual inoculation with M. incognita and X. campestris caused significant reductions in plant growth, while inoculation with Rhizobium sp. resulted in a significant increase in plant growth. Inoculation with M. incognita and X. campestris together caused a greater reduction in plant growth than the damage caused by each of them alone. ...

  2. Xanthomonas campestris pv. campetris affecting Brassica oleracea in northwestern Spain: race identification and search for resistance

    OpenAIRE

    Lema Márquez, Margarita; Francisco Candeira, Marta; Velasco Pazos, Pablo; Cartea González, María Elena

    2010-01-01

    Trabajo presentado al 9th Conference of the European Foundation for Plant Pathology y al 6th Congress of the Sociedad Portuguesa de Fitopatologia celebrados en Evora (Portugal) del 15 al 18 de Noviembre de 2010.

  3. Subcellular localization and functional analyses of a PR10 protein gene from Vitis pseudoreticulata in response to Plasmopara viticola infection.

    Science.gov (United States)

    He, Mingyang; Xu, Yan; Cao, Jiangling; Zhu, Ziguo; Jiao, Yuntong; Wang, Yuejin; Guan, Xin; Yang, Yazhou; Xu, Weirong; Fu, Zhenfang

    2013-02-01

    Downy mildew, caused by the oomycete Plasmopara viticola, is a serious fungal disease in the cultivated European grapevines (Vitis vinifera L.). The class 10 of pathogenesis-related (PR) genes in grapevine leaves was reported to be accumulated at mRNA level in response to P. viticola infection. To elucidate the functional roles of PR10 genes during plant-pathogen interactions, a PR10 gene from a fungal-resistant accession of Chinese wild Vitis pseudoreticulata (designated VpPR10.2) was isolated and showed high homology to PR10.2 from susceptible V. vinifera (designated VvPR10.2). Comparative analysis displayed that there were significant differences in the patterns of gene expression between the PR10 genes from the two host species. VpPR10.2 was induced with high level in leaves infected by P. viticola, while VvPR10.2 showed a low response to this inoculation. Recombinant VpPR10.2 protein showed DNase activity against host genomic DNA and RNase activity against yeast total RNA in vitro. Meanwhile, recombinant VpPR10.2 protein inhibited the growth of tobacco fungus Alternaria alternata and over-expression of VpPR10.2 in susceptible V. vinifera enhanced the host resistance to P. viticola. The results from subcellular localization analysis showed that VpPR10.2 proteins were distributed dynamically inside or outside of host cell. Moreover, they were found in haustorium of P. viticola and nucleus of host cell which was associated with a nucleus collapse at 10 days post-inoculation. Taken together, these results suggested that VpPR10.2 might play an important role in host plant defense against P. viticola infection. PMID:22327469

  4. Evolution of Enzymatic Activities in the Enolase Superfamily: L-Fuconate Dehydratase from Xanthomonas campestris

    Energy Technology Data Exchange (ETDEWEB)

    Yew,W.; Fedorov, A.; Fedorov, E.; Rakus, J.; Pierce, R.; Almo, S.; Gerlt, J.

    2006-01-01

    Many members of the mechanistically diverse enolase superfamily have unknown functions. In this report the authors use both genome (operon) context and screening of a library of acid sugars to assign the L-fuconate dehydratase (FucD) function to a member of the mandelate racemase (MR) subgroup of the superfamily encoded by the Xanthomonas campestris pv. campestris str. ATCC 33913 genome (GI: 21233491). Orthologues of FucD are found in both bacteria and eukaryotes, the latter including the rTS beta protein in Homo sapiens that has been implicated in regulating thymidylate synthase activity. As suggested by sequence alignments and confirmed by high-resolution structures in the presence of active site ligands, FucD and MR share the same active site motif of functional groups: three carboxylate ligands for the essential Mg2+ located at the ends of th third, fourth, and fifth-strands in the (/)7-barrel domain (Asp 248, Glu 274, and Glu 301, respectively), a Lys-x-Lys motif at the end of the second-strand (Lys 218 and Lys 220), a His-Asp dyad at the end of the seventh and sixth-strands (His 351 and Asp 324, respectively), and a Glue at the end of the eighth-strand (Glu 382). The mechanism of the FucD reaction involves initial abstraction of the 2-proton by Lys 220, acid catalysis of the vinylogous-elimination of the 3-OH group by His 351, and stereospecific ketonization of the resulting 2-keto-3-deoxy-L-fuconate product. Screening of the library of acid sugars revealed substrate and functional promiscuity: In addition to L-fuconate, FucD also catalyzes the dehydration of L-galactonate, D-arabinonate, D-altronate, L-talonate, and D-ribonate. The dehydrations of L-fuconate, L-galactonate, and D-arabinonate are initiated by abstraction of the 2-protons by Lys 220. The dehydrations of L-talonate and D-ribonate are initiated by abstraction of the 2-protons by His 351; however, protonation of the enediolate intermediates by the conjugate acid of Lys 220 yields L

  5. Solar radiation affects grapevine susceptibility to Plasmopara Viticola Radiação solar e susceptibilidade da videira à Plasmopara Viticola

    Directory of Open Access Journals (Sweden)

    Anna Dalla Marta

    2008-12-01

    Full Text Available Solar radiation plays an important role in the development of some fungal diseases due to its direct action on the microorganisms and also its indirect effect on the production of specific plant compounds. This experiment examined the effect of two light environments (100% and 35% of full strength on the polyphenolic content of grapevine leaves and quantified their relation to resistance to downy mildew (Plasmopara viticola. Leaf epidermal polyphenolic contents were non-destructively measured during the growing season 2006 using the Dualex chlorophyll fluorescence-based portable leaf-clip. The experimental design consisted of six parcels of 30 vines and measurements were performed on the 12 central vines. The leaves were inoculated with a sporangia suspension containing 50,000 sporangia of P. viticola per mL and the disease severity was assessed after the appearance of symptoms. Leaves maintained at 100% sun had high polyphenolic content and significantly lower disease severity compared to leaves under shading nets. These results indicate an inverse relationship between produced polyphenolics and downy mildew severity.A radiação solar exerce papel importante no desenvolvimento de algumas doenças fúngicas, devido à sua ação direta sobre os microorganismos e também devido ao seu efeito indireto sobre a produção de compostos específicos nas plantas. Este experimento examinou o efeito de dois ambientes de luz (100% e 35% da intensidade máxima sobre o conteúdo de polifenóis nas folhas da videira e quantificou sua relação com a resistência ao míldio (Plasmopara viticola. As concentrações de polifenóis na epiderme das folhas foram quantificadas de forma não destrutiva, durante a estação de crescimento de 2006, usando o equipamento portátil Dualex, baseado na fluorescência da clorofila. O delineamento experimental consistiu de seis parcelas de 30 videiras e as medidas foram feitas nas 12 plantas centrais. As folhas foram

  6. Phenotypic and histochemical traits of the interaction between Plasmopara viticola and resistant or susceptible grapevine varieties

    Directory of Open Access Journals (Sweden)

    Toffolatti Silvia

    2012-08-01

    Full Text Available Abstract Background Grapevine downy mildew, caused by Plasmopara viticola, is a very serious disease affecting mainly Vitis vinifera cultivated varieties around the world. Breeding for resistance through the crossing with less susceptible species is one of the possible means to reduce the disease incidence and the application of fungicides. The hybrid Bianca and some of its siblings are considered very promising but their resistance level can vary depending on the pathogen strain. Moreover, virulent strains characterized by high fitness can represent a potential threat to the hybrid cultivation. Results The host response and the pathogen virulence were quantitatively assessed by artificially inoculating cv Chardonnay, cv Bianca and their siblings with P. viticola isolates derived from single germinating oospores collected in various Italian viticultural areas. The host phenotypes were classified as susceptible, intermediate and resistant, according to the Area Under the Disease Progress Curve caused by the inoculated strain. Host responses in cv Bianca and its siblings significantly varied depending on the P. viticola isolates, which in turn differed in their virulence levels. The fitness of the most virulent strain did not significantly vary on the different hybrids including Bianca in comparison with the susceptible cv Chardonnay, suggesting that no costs are associated with virulence. Among the individual fitness components, only sporangia production was significantly reduced in cv Bianca and in some hybrids. Comparative histological analysis revealed differences between susceptible and resistant plants in the pathogen diffusion and cytology from 48 h after inoculation onwards. Defence mechanisms included callose depositions in the infected stomata, increase in peroxidase activity, synthesis of phenolic compounds and flavonoids and the necrosis of stomata and cells immediately surrounding the point of invasion and determined alterations in

  7. The effectiveness of stilbenes in resistant Vitaceae: ultrastructural and biochemical events during Plasmopara viticola infection process.

    Science.gov (United States)

    Alonso-Villaverde, Virginia; Voinesco, Francine; Viret, Olivier; Spring, Jean-Laurent; Gindro, Katia

    2011-03-01

    Leaves of different Vitis vinifera L. cultivars, susceptible or resistant to downy mildew, Chasselas, Solaris, IRAC 2091 (cvs. Gamaret x Bronner) and Muscadinia rotundifolia were inoculated with Plasmopara viticola. Samples were then examined by scanning and transmission electron microscopy, by light microscopy and for their ability to synthesise stilbenes. These phytoalexins were strictly analysed at infection sites. In the susceptible Chasselas, P. viticola colonises, at 72h post-infection (hpi), all of the spongy mesophyll with functional haustoria and produces mainly the non toxic piceide. No necrotic zone was observed on Chasselas leaves. The ultrastructural response to downy mildew infection is different in each of the other three resistant grape cultivars. In Solaris, where leaf necrosis are rapidly induced, the infection is restricted to the upper part of the loose spongy mesophyll, and associated with a rapid cell wall disruption and the dispersion of cytoplasmic content along with the production of viniferins. In IRAC 2091, leaf necrosis are quite similar to those observed on Solaris but the infected plant cell, as well as the haustoria, show high electron dense cellular particles without any recognisable organelles, probably related to the effect of the toxic compound pterostilbene, which is synthesised in this grape cultivar. In M. rotundifolia leaf necrosis are much more scarce and smaller than in other cultivars, but pathogen and plant cells are both strongly affected, with concomitant expulsion of cytoplasmic materials through the stomata after P. viticola penetration. In this cultivar, the concentration of all identified stilbenes exceeds 1×10³ μmol mg(-1) FW. The critical role of stilbenes in the resistance of Vitis spp. is discussed. PMID:21256040

  8. Fire resistant PV shingle assembly

    Science.gov (United States)

    Lenox, Carl J.

    2012-10-02

    A fire resistant PV shingle assembly includes a PV assembly, including PV body, a fire shield and a connection member connecting the fire shield below the PV body, and a support and inter-engagement assembly. The support and inter-engagement assembly is mounted to the PV assembly and comprises a vertical support element, supporting the PV assembly above a support surface, an upper interlock element, positioned towards the upper PV edge, and a lower interlock element, positioned towards the lower PV edge. The upper interlock element of one PV shingle assembly is inter-engageable with the lower interlock element of an adjacent PV shingle assembly. In some embodiments the PV shingle assembly may comprise a ventilation path below the PV body. The PV body may be slidably mounted to the connection member to facilitate removal of the PV body.

  9. Composition and functional properties of Lupinus campestris protein isolates.

    Science.gov (United States)

    Rodríguez-Ambriz, S L; Martínez-Ayala, A L; Millán, F; Dávila-Ortíz, G

    2005-09-01

    Protein isolates from L. campestris and soybean seeds were prepared using isoelectric precipitation (PI) and micellization (MI) procedures. The amount of protein recovered was considerably higher with the isoelectric precipitation than with the micellization procedure (60% and 30%, respectively). Protein contents were higher than 90% in protein isolates. Antinutritional factors content (alkaloids, lectins, and tannins) were reduced to innocuous levels after protein isolate preparation. Minimum protein solubility for the precipitated lupin protein isolate (LPI) was at pH 4.0, and between pH 4 and 6 for the micellized lupin protein isolate (LMI), increasing at both extremes of the pH scale. Water absorption for the LMI was 1.3 ml/g of protein and its oil absorption 2.2 ml/g of protein. The LPI had 1.7 ml/g of protein in both water and oil absorption. Foaming capacity and stability was pH-dependent. Foaming capacity was higher at pH 2 and lower near the protein isoelectric points. Minimum protein concentration for gelation in LMI was 8% w/v at pH 4, while for LPI was 6% at pH 4 and 6. Amino acid composition in L. campestris flour and protein isolates was high in lysine and low in methionine. Most of the essential amino acids in lupin protein isolates were at acceptable levels compared to a reference pattern for infants and adults. The electrophoretic pattern of both protein isolates showed three bands with different mobilities, suggesting that the protein fractions belong to alpha-conglutin (11S-like protein), beta-conglutin (7S-like protein) and gamma-conglutin. It is proven that some of the functional properties of L. campestris protein isolates are similar to those soybean protein isolates recovered under equal conditions. PMID:16187011

  10. Response of grapevine leaves to plasmopara viticola infection by means of measurement of reflectance and fluorescence signals

    Czech Academy of Sciences Publication Activity Database

    Šebela, David; Olejníčková, Julie; Župčanová, A.; Sotolář, R.

    2012-01-01

    Roč. 27, č. 8 (2012), s. 229-237. ISSN 1211-8516 R&D Projects: GA MŠk(CZ) ED1.1.00/02.0073 Institutional support: RVO:67179843 Keywords : Plasmopara viticola * downy mildew * grapevine * leaf tissue * susceptible varieties * chlorophyll fluorescence imaging * reflectance Subject RIV: GM - Food Processing

  11. Characterization of single-nucleotide-polymorphism markers for Plasmopara viticola, the causal agent of grapevine downy mildew.

    Science.gov (United States)

    Delmotte, F; Machefer, V; Giresse, X; Richard-Cervera, S; Latorse, M P; Beffa, R

    2011-11-01

    We report 34 new nuclear single-nucleotide-polymorphism (SNP) markers that have been developed from an expressed sequence tag library of Plasmopara viticola, the causal agent of grapevine downy mildew. This newly developed battery of markers will provide useful additional genetic tools for population genetic studies of this important agronomic species. PMID:21926208

  12. SOYBEAN AND CASEIN HYDROLYSATES INDUCE GRAPEVINE IMMUNE RESPONSES AND RESISTANCE AGAINST PLASMOPARA VITICOLA

    Directory of Open Access Journals (Sweden)

    Nihed eLachhab

    2014-12-01

    Full Text Available Plasmopara viticola, the causal agent of grapevine downy mildew, is one of the most devastating grape pathogen in Europe and North America. Although phytochemicals are used to control pathogen infections, the appearance of resistant strains and the concern for possible adverse effects on environment and human health are increasing the search for alternative strategies. In the present investigation, we successfully tested two protein hydrolysates from soybean (soy and casein (cas to trigger grapevine resistance against P. viticola. On Vitis vinifera cv. Marselan plants, the application of soy and cas reduced the infected leaf surface by 76 and 63%, as compared to the control, respectively. Since both hydrolysates might trigger the plant immunity, we investigated their ability to elicit grapevine defence responses. On grapevine cell suspensions, a different free cytosolic calcium signature was recorded for each hydrolysate, whereas a similar transient phosphorylation of two MAP kinases of 45 and 49 kDa was observed. These signalling events were followed by transcriptome reprogramming, including the up-regulation of defence genes encoding pathogenesis-related (PR proteins and the stilbene synthase enzyme responsible for the biosynthesis of resveratrol, the main grapevine phytoalexin. Liquid chromatography analyses confirmed the production of resveratrol and its dimer metabolites, δ- and ε-viniferins. Overall, soy effects were more pronounced as compared to the cas one. Both hydrolysates proved to act as elicitors to enhance grapevine immunity against pathogen attack.

  13. The role of rain in dispersal of the primary inoculum of Plasmopara viticola.

    Science.gov (United States)

    Rossi, Vittorio; Caffi, Tito

    2012-02-01

    Although primary infection of grapevines by Plasmopara viticola requires splash dispersal of inoculum from soil to leaves, little is known about the role of rain in primary inoculum dispersal. Distribution of rain splashes from soil to grapevine canopy was evaluated over 20 rain periods (0.2 to 64.2 mm of rain) with splash samplers placed within the canopy. Samplers at 40, 80, and 140 cm above the soil caught 4.4, 0.03, and 0.003 drops/cm(2) of sampler area, respectively. Drops caught at 40 and 80 cm (1.5 cm in diameter) were larger than drops at 140 cm (1.3 cm). Leaf coverage by splashed drops, total drop number, and drop size increased with an increase in the maximum intensity of rain (mm/h) during any rain period. Any rainfall led to infection in potted grapevines placed outside on leaf litter containing oospores, if the litter contained germinated oospores at the time of rain; infection severity was unrelated to rain amount or intensity. Results from vineyards also indicate that any rain can carry P. viticola inoculum from soil to leaves and should be considered a splash event in disease prediction systems. Sampling for early disease detection should focus on the lower canopy, where the probability of splash impact is greatest. PMID:21942732

  14. Soybean and casein hydrolysates induce grapevine immune responses and resistance against Plasmopara viticola.

    Science.gov (United States)

    Lachhab, Nihed; Sanzani, Simona M; Adrian, Marielle; Chiltz, Annick; Balacey, Suzanne; Boselli, Maurizio; Ippolito, Antonio; Poinssot, Benoit

    2014-01-01

    Plasmopara viticola, the causal agent of grapevine downy mildew, is one of the most devastating grape pathogen in Europe and North America. Although phytochemicals are used to control pathogen infections, the appearance of resistant strains and the concern for possible adverse effects on environment and human health are increasing the search for alternative strategies. In the present investigation, we successfully tested two protein hydrolysates from soybean (soy) and casein (cas) to trigger grapevine resistance against P. viticola. On Vitis vinifera cv. Marselan plants, the application of soy and cas reduced the infected leaf surface by 76 and 63%, as compared to the control, respectively. Since both hydrolysates might trigger the plant immunity, we investigated their ability to elicit grapevine defense responses. On grapevine cell suspensions, a different free cytosolic calcium signature was recorded for each hydrolysate, whereas a similar transient phosphorylation of two MAP kinases of 45 and 49 kDa was observed. These signaling events were followed by transcriptome reprogramming, including the up-regulation of defense genes encoding pathogenesis-related (PR) proteins and the stilbene synthase enzyme responsible for the biosynthesis of resveratrol, the main grapevine phytoalexin. Liquid chromatography analyses confirmed the production of resveratrol and its dimer metabolites, δ- and ε-viniferins. Overall, soy effects were more pronounced as compared to the cas ones. Both hydrolysates proved to act as elicitors to enhance grapevine immunity against pathogen attack. PMID:25566290

  15. Building brighter PV business

    International Nuclear Information System (INIS)

    The current status and future prospects of the UK market for solar photovoltaic (PV) electricity are briefly discussed. Through the Department of Trade and Industry (DTI), the UK Government has supported research and development (R and D) into PV for a number of years. This programme has now been extended to demonstrating PV systems on houses. Phase 2 - the domestic field trial programme - aims to monitor the performance of individual systems and the impact on a cluster of systems on the electricity network. New funding had allowed a trebling of the size of this programme, which involves both private developers and housing associations. The DTI is also working to promote PV on commercial buildings, eg the installation of BP Solar PV systems at BP petrol stations. The PV industry in the UK is technically strong and is working to overcome the barriers in the UK to greater uptake of the technology (including cost, conservatism, legal requirements and metering practices). Improvements are expected in a number of recent initiatives in the electricity industry to boost PV use and the PV industry is lobbying for PV to be included in the Enhanced Capital Allowances (ECA) scheme

  16. PV ready roofing systems

    International Nuclear Information System (INIS)

    The integration of PV technology into roofs of houses has become very popular in the United States, Japan, Germany and The Netherlands. There could be a considerable market in the UK for these systems, given the large number of houses that are projected to be built in the next 10 years, and taking account of increased awareness of energy issues. A significant proportion of the market share of annual installed PV is for solar PV systems installed into homes (currently 15%), this is expected to rise to 23% (900MW) by 2010. The grid connected roof and building mounted facade systems represent the fastest growing market for PV systems in Europe. In conclusion, therefore, innovative approached for fixing PV technology onto roofs have been identified for both domestic roofs and for the commercial sector. With reference to production methodologies within the roofing industry, both approaches should be capable of being designed with PV-ready connections suitable for fixing PV modules at a later date. This will help overcome the key barriers of cost of installation, skills required and the lack of retrofit potential. Based on the results of this project, Sustainable Energy together with PV Systems are keen to take forward the full research and development of PV-ready systems for both the domestic and commercial sectors

  17. cDNA-AFLP analysis of plant and pathogen genes expressed in grapevine infected with Plasmopara viticola

    Directory of Open Access Journals (Sweden)

    Kortekamp Andreas

    2008-03-01

    Full Text Available Abstract Background The oomycete Plasmopara viticola (Berk. and Curt. Berl. and de Toni causes downy mildew in grapevine (Vitis vinifera L.. This pathogen is strictly biotrophic, thus completely dependent on living host cells for its survival. The molecular basis of compatibility and disease development in this system is poorly understood. We have carried out a large-scale cDNA-AFLP analysis to identify grapevine and P. viticola genes associated with the infection process. Results We carried out cDNA-AFLP analysis on artificially infected leaves of the susceptible cultivar Riesling at the oil spot stage, on water-treated leaves and on a sample of pure sporangia as controls. Selective amplifications with 128 primer combinations allowed the visualization of about 7000 transcript-derived fragments (TDFs in infected leaves, 1196 of which (17% were differentially expressed. We sequenced 984 fragments, 804 of which were identified as grapevine transcripts after homology searching, while 96 were homologous to sequences in Phytophthora spp. databases and were attributed to P. viticola. There were 82 orphan TDFs. Many grapevine genes spanning almost all functional categories were downregulated during infection, especially genes involved in photosynthesis. Grapevine genes homologous to known resistance genes also tended to be repressed, as were several resistance gene analogs and carbonic anhydrase (recently implicated in pathogen resistance. In contrast, genes encoding cytoskeletal components, enzymes of the phenylpropanoid and beta-oxidation pathways, and pathogenesis related proteins were primarily upregulated during infection. The majority of P. viticola transcripts expressed in planta showed homology to genes of unknown function or to genomic Phytophthora sequences, but genes related to metabolism, energy production, transport and signal transduction were also identified. Conclusion This study provides the first global catalogue of grapevine and P

  18. A proteomic analysis of seed development in Brassica campestri L.

    Directory of Open Access Journals (Sweden)

    Wenlan Li

    Full Text Available To gain insights into the protein dynamics during seed development, a proteomic study on the developing Brassica campestri L. seeds with embryos in different embryogenesis stages was carried out. The seed proteins at 10, 16, 20, 25 and 35 DAP (days after pollination, respectively, were separated using two-dimensional gel electrophoresis and identities of 209 spots with altered abundance were determined by matrix-assisted laser desorption ionization time-of-flight/time-of-flight mass spectrometry (MALDI-TOF/TOF MS. These proteins were classified into 16 groups according to their functions. The most abundant proteins were related to primary metabolism, indicating the heavy demand of materials for rapid embryo growth. Besides, the high amount of proteins involved in protein processing and destination indicated importance of protein renewal during seed development. The remaining were those participated in oxidation/detoxification, energy, defense, transcription, protein synthesis, transporter, cell structure, signal transduction, secondary metabolism, transposition, DNA repair, storage and so on. Protein abundance profiles of each functional class were generated and hierarchical cluster analysis established 8 groups of dynamic patterns. Our results revealed novel characters of protein dynamics in seed development in Brassica campestri L. and provided valuable information about the complex process of seed development in plants.

  19. Helping enhances productivity in campo flicker ( Colaptes campestris) cooperative groups

    Science.gov (United States)

    Dias, Raphael Igor; Webster, Michael S.; Macedo, Regina H.

    2015-06-01

    Reproductive adults in many bird species are assisted by non-breeding auxiliary helpers at the nest, yet the impact of auxiliaries on reproduction is variable and not always obvious. In this study, we tested Hamilton's rule and evaluated the effect of auxiliaries on productivity in the facultative cooperative breeder campo flicker ( Colaptes campestris campestris). Campo flickers have a variable mating system, with some groups having auxiliaries and others lacking them (i.e., unassisted pairs). Most auxiliaries are closely related to the breeding pair (primary auxiliaries), but some auxiliaries (secondary auxiliaries) are unrelated females that joined established groups. We found no effect of breeder quality (body condition) or territory quality (food availability) on group productivity, but the presence of auxiliaries increased the number of fledglings produced relative to unassisted pairs. Nonetheless, the indirect benefit of helping was small and did not outweigh the costs of delayed breeding and so seemed insufficient to explain the evolution of cooperative breeding in campo flickers. We concluded that some ecological constraints must limit dispersal or independent breeding, making staying in the group a "best-of-a-bad-job" situation for auxiliaries.

  20. Production and cytogenetics of Brassica campestris-alboglabra chromosome addition lines

    DEFF Research Database (Denmark)

    Chen, B.Y.; Cheng, B.F.; Bagger Jørgensen, Rikke;

    1997-01-01

    Four different Brassica campestris-alboglabra monosomic addition lines (AA + 1 chromosome from C, 2n = 21) were obtained after consecutive backcrosses between resynthesized B. napus (AACC, 2n = 38) and the parental B. campestris (AA, 2n = 20) accession. The alien chromosomes of B. alboglabra (CC, 2...... occurred during the evolution of the two species. Intergenomic introgression was observed in the progenies of the addition lines. The introgression of an entire B. alboglabra marker synteny group into the B. campestris genome implied the possible occurrence of interspecific chromosomal substitution....

  1. Scientific Opinion on the risk to plant health of Xanthomonas citri pv. citri and Xanthomonas citri pv. aurantifolii for the EU territory

    Directory of Open Access Journals (Sweden)

    EFSA Panel on Plant Health (PLH

    2014-02-01

    Full Text Available The Panel conducted a pest risk assessment for Xanthomonas campestris (all strains pathogenic to Citrus for the EU territory and an assessment of the effectiveness of present EU requirements against Xanthomonas strains pathogenic to citrus. The risk assessment was conducted under the scenario of absence of the current specific EU plant health legislation and the assumption that citrus-exporting countries apply measures to reduce yield and quality losses. Risk reduction options were systematically identified and evaluated. The strains of X. campestris pathogenic to citrus have been reclassified as four distinct infraspecific taxa within two species: X. citri and X. alfalfae. Only two pathovars (X. citri pv. citri and X. citri pv. aurantifolii are responsible for the citrus bacterial canker thatpresents a major risk for the citrus industry in the EU. Seven entry pathways have been identified and evaluated. The likelihood of entry was rated unlikely for fruit, very likely for fruit plants for planting, moderately likely for ornamental plants for planting and unlikely for leaves and twigs. The uncertainty of probability of entry was rated as high. The probability of establishment was rated as moderately likely to likely with a medium uncertainty because host plants are widely present in EU areas where environmental conditions are suitable. Once established, spread would be likely with a low uncertainty. The impact of the disease, even if control measures are applied, was rated as moderate to major with a medium uncertainty. The disease would cause yield losses in areas where citrus is the main crop, increase the need for control measures and create environmental problems.The combined EU regulations have been shown to be effective in preventing the introduction of X. citri pv. citri or X. citri pv. aurantifolii in the EU, as no outbreaks of citrus canker in the EU territory have been reported.

  2. Neural network for the estimation of leaf wetness duration: application to a Plasmopara viticola infection forecasting

    Science.gov (United States)

    Marta, A. Dalla; De Vincenzi, M.; Dietrich, S.; Orlandini, S.

    Leaf wetness duration (LWD) is one of the most important variables responsible for the outbreak of plant diseases but, in spite of its importance, the technology for measurement is not rather reliable. For this reason the modelling appears to be a valid support for LWD assessment. In this work a technique for LWD estimation that was applied in some agro-environmental studies from few years was used: artificial neural network (ANN). The ANN output then was used as input for an epidemiological model to predict Plasmopara viticola infections. The aim of this work was to carry out an ANN capable to find out the relationships between the agrometeorological input and LWD and to evaluate the impact of this estimated LWD when integrated in epidemiological simulations.

  3. The PV market

    International Nuclear Information System (INIS)

    This paper forecasts the photovoltaic (PV) market growth for the 1990s. Ten years of PV history are reviewed and used to establish market trends in terms of average selling price (ASP) and kilowatts shipped by market segment. The market is segmented into indoor consumer, stand-alone, and grid-connected applications. Indoor consumer presently represents a saturated market and is fairly predictable. The stand-alone market (i.e. not connected to the utility grid) is fairly stable and predictable. The utility PV market however is highly dependent on a number of market factors such as the cost of conventional energy the cost of PV systems utility acceptance of PV and regulatory controls. Government and institutional regulations, environmental issues, and OPEC and Middle East politics will have the greatest impact on the cost of conventional fuels. Private and federal investment in PV technology development could have a significant impact on the cost of PV systems. Forecasts are provided through the year 2000 for indoor consumer stand-alone and utility markets

  4. Clustering of Mutations Blocking Synthesis of Xanthan Gum by Xanthomonas campestris

    OpenAIRE

    Thorne, L.; Tansey, L.; Pollock, T J

    1987-01-01

    Mutations that block the synthesis of xanthan gum by Xanthomonas campestris B1459S-4L-II were isolated as nonmucoid colonies after treatment with ethyl methanesulfonate. Complete libraries of DNA fragments from wild-type X. campestris were cloned into Escherichia coli by using a broad-host-range cosmid vector and then transferred into each mutant strain by conjugal mating. Cloned fragments that restored xanthan gum synthesis (Xgs+; mucoidy) were compared according to restriction pattern, DNA ...

  5. Vitis vinifera canes, a new source of antifungal compounds against Plasmopara viticola, Erysiphe necator, and Botrytis cinerea.

    Science.gov (United States)

    Schnee, Sylvain; Queiroz, Emerson F; Voinesco, Francine; Marcourt, Laurence; Dubuis, Pierre-Henri; Wolfender, Jean-Luc; Gindro, Katia

    2013-06-12

    Methanolic and ethanolic crude extracts of Vitis vinifera canes exhibited significant antifungal activity against the three major fungal pathogens affecting grapevines, Plasmopara viticola, Erysiphe necator and Botrytis cinerea. The active extracts were analyzed by LC-PDA-ESI-MS, and selected compounds were identified. Efficient targeted isolation using medium-pressure liquid chromatography afforded six pure constituents in one step. The structures of the isolated compounds were elucidated by NMR and HRMS. Six identified compounds (ampelopsin A, hopeaphenol, trans-resveratrol, ampelopsin H, ε-viniferin, and E-vitisin B) presented antifungal activities against P. viticola. ε-Viniferin also exhibited a low antifungal activity against B. cinerea. None of the identified compounds inhibited the germination of E. necator. The potential to develop a novel natural fungicide against the three major fungal pathogens affecting V. vinifera from viticulture waste material is discussed. PMID:23730921

  6. Grid integrated distributed PV (GridPV).

    Energy Technology Data Exchange (ETDEWEB)

    Reno, Matthew J.; Coogan, Kyle [Georgia Institute of Technology, Atlanta, GA

    2013-08-01

    This manual provides the documentation of the MATLAB toolbox of functions for using OpenDSS to simulate the impact of solar energy on the distribution system. The majority of the functions are useful for interfacing OpenDSS and MATLAB, and they are of generic use for commanding OpenDSS from MATLAB and retrieving information from simulations. A set of functions is also included for modeling PV plant output and setting up the PV plant in the OpenDSS simulation. The toolbox contains functions for modeling the OpenDSS distribution feeder on satellite images with GPS coordinates. Finally, example simulations functions are included to show potential uses of the toolbox functions. Each function in the toolbox is documented with the function use syntax, full description, function input list, function output list, example use, and example output.

  7. Batteries in PV systems

    OpenAIRE

    Mohedano Martínez, Javier Bernabé

    2011-01-01

    This report presents fundamentals of battery technology and charge control strategies commonly used in stand-alone photovoltaic (PV) Systems,with an introduction on the PV Systems itself. This project is a compilation of information from several sources, including research reports and data from component manufacturers. Comparisons are given for various battery technologies, and considerations for battery subsystem design, auxiliary systems, maintenance and safety are discussed. Daily operatio...

  8. Methionine elicits H2O2 generation and defense gene expression in grapevine and reduces Plasmopara viticola infection.

    Science.gov (United States)

    Boubakri, Hatem; Wahab, Mohamed Ali; Chong, Julie; Gertz, Claude; Gandoura, Samia; Mliki, Ahmed; Bertsch, Christophe; Soustre-Gacougnolle, Isabelle

    2013-12-15

    Methionine (Met) is a nutritionally essential sulfur-containing amino acid (SAA) known for its preponderant role as initiator in protein synthesis. However, other functions for Met in plants are not well described. The implication of this SAA in oxidative stress tolerance has been recently reported, however the mode of action of Met is still poorly understood. Here, we analyzed the elicitor activity of Met in grapevine as well as its effect on Plasmopara viticola resistance. The results show that Met induces hydrogen peroxide (H2O2) generation, a key element in plant defense signaling, and upregulates the expression of a battery of defense-related genes. Transcript levels of these genes were not further modulated by P. viticola inoculation of Met-pretreated plants, suggesting an elicitor role rather than a priming role for Met in grapevine. Met treatment also reduces P. viticola development in grapevine plants grown under glasshouse controlled-conditions. Fungitoxicity assays revealed that Met possesses a moderate antifungal activity compared with cysteine (Cys), another SAA known for its toxic effect to a large spectrum of fungi. PMID:23859561

  9. PV-WEB: internet-based PV information tool

    Energy Technology Data Exchange (ETDEWEB)

    Cowley, P.

    2003-07-01

    This report gives details of a project to create a web-based information system on photovoltaic (PV) systems for the British PV Association (PV-UK) for use by decision makers in government, the utilities, and the housing and construction sectors. The project, which aims to provide an easily accessible tool for UK companies, promote PV technology, increase competitiveness, and identify market opportunities, is described. The design of the web site and its implementation and the evolution are discussed, along with the maintenance of the site by PV-UK and the opportunities offered to PV-UK Members.

  10. PV-WEB: internet-based PV information tool

    International Nuclear Information System (INIS)

    This report gives details of a project to create a web-based information system on photovoltaic (PV) systems for the British PV Association (PV-UK) for use by decision makers in government, the utilities, and the housing and construction sectors. The project, which aims to provide an easily accessible tool for UK companies, promote PV technology, increase competitiveness, and identify market opportunities, is described. The design of the web site and its implementation and the evolution are discussed, along with the maintenance of the site by PV-UK and the opportunities offered to PV-UK Members

  11. Global PV Market Development

    International Nuclear Information System (INIS)

    The dawn of 2009 saw several events which caused major turbulence in the global photovoltaic industry. In 2008 the Spanish PV market grew beyond all expectations and even outranked Germany as the world's number one market. However, the promotion scheme was modified and a market cap was introduced in 2009, cutting back the maximum capacity to be installed to about the level of 2007. In addition, the industry is facing an oversupply of PV modules and a harsh recession which is significantly affecting the traditionally strong PV markets. International photovoltaic companies are challenged by a changing market situation: all of a sudden, competition has increased significantly, pushing the customer to the fore. As a result, a consolidation process is expected within the PV industry worldwide. However, the story is not all negative. In the U.S., the election of Barack Obama may be seen as the starting signal for a massive expansion in PV, likely to bring the country to first place globally within the next five years. Furthermore, different markets and market segments are being opened up - especially in Europe - thanks to the gradual arrival of generation parity and new PV support mechanisms. EuPD Research has observed and studied international PV markets since its foundation. The information included in the presentation is based on a wide range of quantitative and qualitative studies that EuPD Research has conducted in the key markets since 2002. Florian Schmidt, EuPD Research's Head of Product Management, will give an overview of the global PV market and how it is developing in this crucial year 2009. Aspects such as technology development, production capacities and the demand side will be included, with a special emphasis on the European PV markets. So far Chinese PV companies have often benefited from the booming PV markets in Europe, above all Germany and Spain. Due to the lack of domestic market, the Chinese industry strongly depends on the export and is

  12. Biocatalytic Synthesis of a-Arbutin by the Intracellular Crude Enzyme from Xanthomonas Campestris%野油菜黄单胞菌胞内粗酶液催化合成α-熊果苷

    Institute of Scientific and Technical Information of China (English)

    张欣英; 严伟; 李群良; 姚评佳; 魏远安; 唐纪良

    2012-01-01

    Biocatalytic synthesis of α-arbutin by the intracellular crude enzyme from Xanthomonas campes-tris pv. campestris 8004 was studied. The effects of hydroquinone concentration,reactant molar ratio,buffer solution pH value,reaction time and cell concentration on the reaction were investigated. The results showed that the optimum reaction conditions were as follows: the reaction temperature was 35℃ ,the rotational speed was 180 r·min-1,hydroquinone concentration was 40 mmol· L-1 ,the molar ratio of hydroquinone to sucrose was 1:30,the buffer solution pH value was 7.0,the reaction time was 36 h,the cell concentration was 80 mg·mL-1 . Under above conditions,α-arbutin content reached 6. 58 mg·mL-1 ,the selectivity of hydroquinone was 66%,and the conversion rate of hydroquinone was 91%.%利用野油菜黄单胞菌(Xanthomonas campestris pv.campestris) 8004胞内粗酶液生物催化合成α-熊果苷,察了对苯二酚浓度、反应物摩尔比、缓冲溶液pH值、反应时间、菌体浓度等因素对反应的影响.确定最佳反应条件为:应温度35℃、摇床转速180 r·min-1、对苯二酚浓度40mmol·L-1、对苯二酚与蔗糖的摩尔比1∶30、缓冲溶液pH7.0、反应时间36 h、菌体浓度80 mg·mL-1,在此条件下,α-熊果苷含量达到6.58mg· mL-1、对苯二酚选择性为66 %对苯二酚转化率为91%.

  13. PV power forecast using a nonparametric PV model

    OpenAIRE

    Pinho-Almeida, Marcelo; Perpiñan Lamigueiro, Oscar; Narvarte Fernandez, Luis

    2015-01-01

    Forecasting the AC power output of a PV plant accurately is important both for plant owners and electric system operators. Two main categories of PV modeling are available: the parametric and the nonparametric. In this paper, a methodology using a nonparametric PV model is proposed, using as inputs several forecasts of meteorological variables from a Numerical Weather Forecast model, and actual AC power measurements of PV plants. The methodology was built upon the R environment and uses Quant...

  14. Bioconcentration factors (BCF) of silver in wild Agaricus campestris

    Energy Technology Data Exchange (ETDEWEB)

    Falandysz, J.; Danisiewicz, D. [Univ. of Gdansk (Poland)

    1995-07-01

    Silver is an element naturally occurring in small concentrations in different environmental sites. However, many anthropogenic sources of silver led to contamination of this element in soil surfaces, pastures, and coastal marine areas in different parts of the world. Estimates are that 40% of the 1.15x10{sup 4}t of silver produced annually worldwide, will escape into the environment. Due to municipal waste discharge and/or industrial effluents with high silver concentrations, 100 x above the background level have been reported in invertebrate species from polluted marine areas. The meta-stabile radioisotope, {sup 110m}Ag, is a main component of the liquid effluents from nuclear facilities under normal operating conditions. The presence of {sup 111}Ag and {sup 110m}Ag also has been widely found throughout Europe in the 1986 Chernobyl fallout. Silver ions are environmentally harmful. High toxic effects have been observed at low concentrations, especially in aquatic species. Species of lower fungi as well as the mushroom Agaricus bisporus are know to bioaccumulate high concentrations of silver when grown on an artificially enriched substrate. This study looks at the relationship between the silver content of soil and bioconcentration potential of wild Agaricus campestris from sites under different use and with different concentrations of heavy metals. 28 refs., 2 figs., 2 tabs.

  15. Inheritance of downy mildew (Plasmopara viticola) and anthracnose (Sphaceloma ampelinum) resistance in grapevines.

    Science.gov (United States)

    Poolsawat, O; Mahanil, S; Laosuwan, P; Wongkaew, S; Tharapreuksapong, A; Reisch, B I; Tantasawat, P A

    2013-01-01

    Downy mildew (Plasmopara viticola) and anthracnose (Sphaceloma ampelinum) are two of the major diseases of most grapevine (Vitis vinifera L.) cultivars grown in Thailand. Therefore, breeding grapevines for improved downy mildew and anthracnose resistance is crucial. Factorial crosses were made between three downy mildew and/or anthracnose resistant lines ('NY88.0517.01', 'NY65.0550.04', and 'NY65.0551.05'; male parents) and two or three susceptible cultivars of V. vinifera ('Black Queen', 'Carolina Black Rose', and/or 'Italia'; female parents). F1 hybrid seedlings were evaluated for downy mildew and anthracnose resistance using a detached/excised leaf assay. For both diseases, the general combining ability (GCA) variance among male parents was significant, while the variance of GCA among females and the specific combining ability (SCA) variance were not significant, indicating the prevalence of additive over non-additive gene actions. The estimated narrow sense heritabilities of downy mildew and anthracnose resistance were 55.6 and 79.2%, respectively, suggesting that downy mildew/anthracnose resistance gene(s) were highly heritable. The 'Carolina Black Rose x NY65.0550.04' cross combination is recommended for future use. PMID:24391016

  16. Proteomic analysis of the compatible interaction between Vitis vinifera and Plasmopara viticola.

    Science.gov (United States)

    Milli, Alberto; Cecconi, Daniela; Bortesi, Luisa; Persi, Anna; Rinalducci, Sara; Zamboni, Anita; Zoccatelli, Gianni; Lovato, Arianna; Zolla, Lello; Polverari, Annalisa

    2012-02-01

    We analyzed the proteome of grapevine (Vitis vinifera) leaves 24, 48 and 96 h post infection (hpi) with the downy mildew pathogen Plasmopara viticola. Total proteins were separated on 2-DE gels. By MS analysis, we identified 82 unique grapevine proteins differentially expressed after infection. Upregulated proteins were often included in the functional categories of general metabolism and stress response, while proteins related to photosynthesis and energy production were mostly downregulated. As expected, the activation of a defense reaction was observed more often at the late time point, consistent with the establishment of a compatible interaction. Most proteins involved in resistance were isoforms of different PR-10 pathogenesis-related proteins. Although >50 differentially expressed protein isoforms were observed at 24 and 96 hpi, only 18 were detected at 48 hpi and no defense-related proteins were among this group. This profile suggests a transient breakdown in defense responses accompanying the onset of disease, further supported by gene expression analyses and by a western blot analysis of a PR-10 protein. Our data reveal the complex modulation of plant metabolism and defense responses during compatible interactions, and provide insight into the underlying molecular processes which may eventually yield novel strategies for pathogen control in the field. PMID:22120121

  17. Lysobacter capsici AZ78 can be combined with copper to effectively control Plasmopara viticola on grapevine.

    Science.gov (United States)

    Puopolo, Gerardo; Giovannini, Oscar; Pertot, Ilaria

    2014-01-01

    The bacterial genus Lysobacter represents a still underdeveloped source of biocontrol agents able to protect plants against pathogenic oomycetes. In this work the L. capsici strain AZ78 was evaluated with regard to the biological control of Plasmopara viticola, the causal agent of grapevine downy mildew. L. capsici AZ78 is able to resist copper ions and its resistance to this metal is probably due to the presence of genes coding for copper oxidase (copA) and copper exporting PIB-type ATPases (ctpA). The presence of both genes was also detected in other members of the Lysobacter genus. Resistance to copper allowed L. capsici AZ78 to be combined with a low-dose of a copper-based fungicide, leading to more effective control of grapevine downy mildew. Notably, prophylactic application of L. capsici AZ78 alone to grapevine leaves reduced downy mildew disease to the same degree as a copper-based fungicide. Furthermore, L. capsici AZ78 persists in the phyllosphere of grapevine plants and tolerates environmental stresses such as starvation, freezing, mild heat shock and UV light irradiation. These traits suggest that L. capsici AZ78 could be a suitable candidate for developing a new biofungicide to be used in combination with copper to control grapevine downy mildew. PMID:24140153

  18. Alterations in grapevine leaf metabolism upon inoculation with Plasmopara viticola in different time-points.

    Science.gov (United States)

    Ali, Kashif; Maltese, Federica; Figueiredo, Andreia; Rex, Martina; Fortes, Ana Margarida; Zyprian, Eva; Pais, Maria Salomé; Verpoorte, Robert; Choi, Young Hae

    2012-08-01

    Grapevines are easily infected by plant pathogens. It was found that resistant grapevines induce a wide range of phenolics upon the pathogen-infection. In this study in order to gain insight into these processes in different time-points the metabolic changes during the interaction of two grapevine cultivars, 'Regent' (resistant) and 'Trincadeira' (susceptible), with the downy mildew pathogen (Plasmopara viticola) were investigated. Nuclear magnetic resonance (NMR) spectroscopy on leaf extracts was used at several time points after experimental inoculation. A wide range of metabolites were identified using various two-dimensional (2D)-NMR techniques. Multivariate data analysis characterized both the resistant and the susceptible cultivars and their response against the pathogen. Metabolites responsible for their discrimination were identified as a fertaric acid, caftaric acid, quercetin-3-O-glucoside, linolenic acid, and alanine in the resistant cultivar 'Regent', while the susceptible 'Trincadeira' showed higher levels of glutamate, succinate, ascorbate and glucose. This study portrays the analytical capability of NMR spectroscopy and multivariate data analyses methods for the metabolic profiling of plant samples. The results obtained will underline the role of phenylpropanoids and flavonoids in resistance against biotic stresses which in turn provides a firm platform for the metabolic engineering of grapevine cultivars with higher resistance towards pathogens. PMID:22682569

  19. Investors favour PV over CSP

    Energy Technology Data Exchange (ETDEWEB)

    Cohn, Lisa; Smith, Reid

    2011-07-01

    A couple of years ago, CSP seemed to be the utility-scale solar electricity of the future. Now costs for PV systems have declined so much quicker that some investors have changed their plans from CSP to PV. (orig.)

  20. Firefighter Safety for PV Systems

    DEFF Research Database (Denmark)

    Mathe, Laszlo; Sera, Dezso; Spataru, Sergiu;

    2015-01-01

    An important and highly discussed safety issue for photovoltaic (PV) systems is that as long as the PV panels are illuminated, a high voltage is present at the PV string terminals and cables between the string and inverters that is independent of the state of the inverter's dc disconnection switc....... The presence of these energized conductors on the dc side of the PV system can pose a danger to anyone performing maintenance or firefighting....

  1. PV investment in Europe

    Energy Technology Data Exchange (ETDEWEB)

    Hueser, Pius [Nova Energy GmbH, (Switzerland)

    2007-06-15

    This presentation is mainly about how the PV market in Europe has been growing, and which elements are going to determine if this market succeed or failed not only in Europe but also in the rest of the world. In the first part of this presentation, it is mentioned how in 2005 the development of some PV technologies triggered the PV market growth without any marketing control. Then, there are explained the aspects that changed such situation out of control, therefore, it emerged the beginning of the consolidation of this market. There are briefly explained those factors that are going to determine if this market succeed or failed in the future. Finally, there are given examples of some the PV investments. [Spanish] Esta presentacion habla principalmente de la manera en como ha crecido el Mercado de sistemas fotovoltaicos en Europa, asi tambien se mencionan los elementos fundamentales que determinaran el exito o fracaso de este mercado, no solamente en Europa sino tambien en el resto del mundo, en un futuro. En la primera parte de esta presentacion, se describe como en el 2005, debido al desarrollo de algunas tecnologias fotovoltaicas se desencadeno el crecimiento desenfrenado del mercado fotovoltaico. Despues, se explican los aspectos que hicieron que dicho crecimiento tomara su curso, teniendo como resultado el inicio de un mercado mas consolidado. Se explican brevemente los factores que determinaran si este mercado encuentra el exito o el fracaso en un futuro. Finalmente, se dan ejemplos de algunas adquisiciones fotovoltaicas.

  2. Testing for PV Reliability (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Kurtz, S.; Bansal, S.

    2014-09-01

    The DOE SUNSHOT workshop is seeking input from the community about PV reliability and how the DOE might address gaps in understanding. This presentation describes the types of testing that are needed for PV reliability and introduces a discussion to identify gaps in our understanding of PV reliability testing.

  3. PV potential and potential PV rent in European regions

    DEFF Research Database (Denmark)

    Hansen, Anders Chr.; Thorn, Paul

    2013-01-01

    The paper provides a GIS based model for assessing the potentials of photovoltaic electricity in Europe by NUTS 2 regions. The location specific energy potential per PV-­‐panel area is estimated based on observations of solar irradiation, conversion efficiency, levelised costs and the social value...... of PV-­‐electricity. Combined with the potential density of PV-­‐panel area based on land cover and environental restrictions, the PV energy potential and the potential PV ressource rent is calculated. These calculations enbable the model to estimate the regional patterns at NUTS 2 level of the...

  4. Ação de quitosana sobre o desenvolvimento de Plasmopara viticola e Elsinoe ampelina, in vitro e em videiras cv. Isabel Chitosan action on Plasmopara viticola and Elsinoe ampelina development in vitro and in grapevines cv. Isabel

    OpenAIRE

    Aline José Maia; Renato Vasconcelos Botelho; Cacilda Márcia Duarte Rios Faria; Carla Daiane Leite

    2010-01-01

    Este trabalho teve como objetivos avaliar o efeito da quitosana no controle dos fungos Plasmopara viticola e Elsinoe ampelina, agentes causais do míldio e da antracnose da videira, respectivamente. As concentrações de 0, 20, 40, 80 e 160 mg L-1 de quitosana foram utilizadas nos seguintes experimentos: testes de crescimento micelial, de germinação de esporos e ensaio em condições de campo. Para os dois últimos ensaios, adicionou-se tratamentos padrões com mancozeb e calda bordalesa. Verificou-...

  5. In vivo localization at the cellular level of stilbene fluorescence induced by Plasmopara viticola in grapevine leaves.

    Science.gov (United States)

    Bellow, Sébastien; Latouche, Gwendal; Brown, Spencer C; Poutaraud, Anne; Cerovic, Zoran G

    2012-06-01

    Accurate localization of phytoalexins is a key for better understanding their role. This work aims to localize stilbenes, the main phytoalexins of grapevine. The cellular localization of stilbene fluorescence induced by Plasmopara viticola, the agent of downy mildew, was determined in grapevine leaves of very susceptible, susceptible, and partially resistant genotypes during infection. Laser scanning confocal microscopy and microspectrofluorimetry were used to acquire UV-excited autofluorescence three-dimensional images and spectra of grapevine leaves 5-6 days after inoculation. This noninvasive technique of investigation in vivo was completed with in vitro spectrofluorimetric studies on pure stilbenes as their fluorescence is largely affected by the physicochemical environment in various leaf compartments. Viscosity was the major physicochemical factor influencing stilbene fluorescence intensity, modifying fluorescence yield by more than two orders of magnitude. Striking differences in the localization of stilbene fluorescence induced by P. viticola were observed between the different genotypes. All inoculated genotypes displayed stilbene fluorescence in cell walls of guard cells and periclinal cell walls of epidermal cells. Higher fluorescence intensity was observed in guard-cell walls than in any other compartment due to increased local viscosity. In addition stilbene fluorescence was found in epidermal cell vacuoles of the susceptible genotype and in the infected spongy parenchyma of the partially resistant genotype. The very susceptible genotype was devoid of fluorescence both in the epidermal vacuoles and the mesophyll. This strongly suggests that the resistance of grapevine leaves to P. viticola is correlated with the pattern of localization of induced stilbenes in host tissues. PMID:22412183

  6. Resistance to Plasmopara viticola in a grapevine segregating population is associated with stilbenoid accumulation and with specific host transcriptional responses

    Directory of Open Access Journals (Sweden)

    Delledonne Massimo

    2011-08-01

    Full Text Available Abstract Background Downy mildew, caused by the oomycete Plasmopara viticola, is a serious disease in Vitis vinifera, the most commonly cultivated grapevine species. Several wild Vitis species have instead been found to be resistant to this pathogen and have been used as a source to introgress resistance into a V. vinifera background. Stilbenoids represent the major phytoalexins in grapevine, and their toxicity is closely related to the specific compound. The aim of this study was to assess the resistance response to P. viticola of the Merzling × Teroldego cross by profiling the stilbenoid content of the leaves of an entire population and the transcriptome of resistant and susceptible individuals following infection. Results A three-year analysis of the population's response to artificial inoculation showed that individuals were distributed in nine classes ranging from total resistance to total susceptibility. In addition, quantitative metabolite profiling of stilbenoids in the population, carried out using HPLC-DAD-MS, identified three distinct groups differing according to the concentrations present and the complexity of their profiles. The high producers were characterized by the presence of trans-resveratrol, trans-piceid, trans-pterostilbene and up to thirteen different viniferins, nine of them new in grapevine. Accumulation of these compounds is consistent with a resistant phenotype and suggests that they may contribute to the resistance response. A preliminary transcriptional study using cDNA-AFLP selected a set of genes modulated by the oomycete in a resistant genotype. The expression of this set of genes in resistant and susceptible genotypes of the progeny population was then assessed by comparative microarray analysis. A group of 57 genes was found to be exclusively modulated in the resistant genotype suggesting that they are involved in the grapevine-P. viticola incompatible interaction. Functional annotation of these transcripts

  7. Leaf wetness duration: importance of estimated and measured data for Plasmopara viticola infection forecasting

    Science.gov (United States)

    dalla Marta, A.; de Vincenzi, M.; Dietrich, S.; Orlandini, S.

    2003-04-01

    The use of simulation models and remote sensing data seem to be a useful alternative to leaf wetness duration (LWD) field measurements. In the last years some researchers have applied in agroenvironmental sector a particular type of model: Artificial Neural Networks (ANNs). ANNs are particular devices for numerical elaboration that have the ability to map the input-output relationships between phenomena and their influencing quantities and to make an internal function from a data set given as example. Radar provides a gridded values of LWD with a precise description of climatic spatial variability. The principal aim of this work was to carry out an ANN capable to find out the relationships between the agrometeorological input and LWD and to analyse and compare the impact of radar and ANN estimated and measured LWD on the quality of the epidemiological simulation. All the input data were collected with hourly time step from 3 weather stations placed in Friuli Venezia Giulia (North East of Italy). In this work a progressively higher number of agrometeorological data was used as input for the LWD simulation and the results were compared in order to find out the network structure capable to give the best result with the minimum possible number of input. Air temperature and relative humidity were the first two parameters used for the simulation; in the following elaborations the data of rainfall, wind speed, global solar radiation and vapour pressure deficit were added one by one creating a model each time more complex. LWD data were also obtained from the weather station measurement using leaf wetness gauge, and from the elaboration of rainfall data estimated by a polarimetric radar GPM 500. Finally, the LWD estimated with the above mentioned methods were used, together with measured data, as input for an epidemiological model to predict grapevine downy mildew (Plasmopara viticola) infections.

  8. Minimal Phenotypic Test for Simple Differentiation of Xanthomonas Campestris from other Yellow-Pigmented Bacteria Isolated from Soil

    Directory of Open Access Journals (Sweden)

    MR Soudi

    2011-06-01

    Full Text Available Background and Objectives: Isolation of Xanthomonas campestris from soil has a wide range of applications from monitoring of phytopathogenic populations in soil to screening of improved xanthan-producing strains. Identification of Xanthomonas campestris and its pathovars requires pathogenicity tests in addition to phenotypic and molecular characterization.Materials and Methods: Thirty phenotypic tests were carried out on 57 yellow-pigmented bacterial isolates obtained from soil of cabbage farms after screening on Selective Xanthomonas (SX agar and transferring on Yeast Malt agar. Absorption spectra of pigments and capability of biopolymer production were determined for the isolates. Some characteristics of the biopolymer produced and presence of a X. campestris-specific gene marker were investigated for nine putative X. campestris isolates.Results: The present study introduces a set of simple phenotypic tests including urease, acid production from sucrose, mucoid growth on 5% sucrose, starch hydrolysis, growth in 4% NaCl, motility and utilization of asparagine as sole carbon and nitrogen source for quick and inexpensive tentative identification of Xanthomonas campestris. Validation of these tests was confirmed in 100% of the cases by characterization of bacterial exopolysaccharide as xanthan and production of genus-specific xanthomonadin pigment. Moreover, tracking of hrc gene among putative X. campestris isolates gave positive results in 80% of cases.Conclusion: The Minimal simple phenotypic tests facilitate the screening and differentiation of putative X. campestris isolates from other false bacterial strains isolated from soil on semiselective SX agar.

  9. Effect of seed-irradiation on morphological characters yield components of brassica campestris var. sarson

    International Nuclear Information System (INIS)

    Seed of Brassica campestris (var. Sarson) were used to study the effect of radiation of different morphological and yield parameters. Survival percentage showed drastic decrease at higher doses (75 Kr and 100 Kr). Similarly all characters showed a trend of decrease with increasing dose. LD50 for Brassica was about 50 Kr. (author)

  10. Growth and xanthan production of Xanthomonas campestris depending on the N-source concentration

    Energy Technology Data Exchange (ETDEWEB)

    Prell, A. [Academy of Sciences of the Czech Republic, Prague (Czech Republic). Inst. of Microbiology; Lasik, J. [Academy of Sciences of the Czech Republic, Prague (Czech Republic). Inst. of Microbiology; Konicek, J. [Academy of Sciences of the Czech Republic, Prague (Czech Republic). Inst. of Microbiology; Sobotka, M. [Academy of Sciences of the Czech Republic, Prague (Czech Republic). Inst. of Microbiology; Sys, J. [Academy of Sciences of the Czech Republic, Prague (Czech Republic). Inst. of Microbiology

    1995-11-01

    Growth of X. campestris and production of xanthan were studied in several batch fermentations with different starting concentrations of N-source. The dependencies of growth, productivity and yields on initial N-source concentration were observed. The maximum yields in the course of cultivations were identified. (orig.)

  11. Study on the spectral response of Brassica Campestris L. leaf to the copper pollution

    Institute of Scientific and Technical Information of China (English)

    LIU SuHong; LIU XinHui; HOU Juan; CHI GuangYu; CUI BaoShan

    2008-01-01

    Brassica Campestis L. was cultivated in the soil at the laboratory. The red edge, the visual spectrum and the near-infrared spectrum of Brassica Campestis L. leaf were used to explore the spectral response of Brassica Campestis L. leaf to the copper stress. As the Cu content in the soil gets increased, the copper level in Brassica Campestris L. leaf would be increased, and the chlorophyll level in Brassica Campestris L. leaf would be decreased. As a result, the visual spectral reflectance (A1) of Brassica Campestris L. leaf is increased, and the blue-shift (moving towards the shorter waveband) degree (S) of the red edge (the ascending region of the reflectivity at 680-740 nm) gets increased. However, the near-infrared spectral reflectance (A2) decreases. With the correlation coefficient R2 more than 0.95, these parameters of A1,A2 and S can be perfectly used to simulate and predict the copper level in Brassica Campestris L. leaf.

  12. Study on the spectral response of Brassica Campestris L. leaf to the copper pollution

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Brassica Campestis L. was cultivated in the soil at the laboratory. The red edge,the visual spectrum and the near-infrared spectrum of Brassica Campestis L. leaf were used to explore the spectral response of Brassica Campestis L. leaf to the copper stress. As the Cu content in the soil gets increased,the copper level in Brassica Campestris L. leaf would be increased,and the chlorophyll level in Brassica Campestris L. leaf would be decreased. As a result,the visual spectral reflectance (A1) of Brassica Campestris L. leaf is increased,and the blue-shift (moving towards the shorter waveband) degree (S) of the red edge (the ascending region of the re-flectivity at 680―740 nm) gets increased. However,the near-infrared spectral re-flectance (A2) decreases. With the correlation coefficient R2 more than 0.95,these parameters of A1,A2 and S can be perfectly used to simulate and predict the copper level in Brassica Campestris L. leaf.

  13. Genome Sequence of Xanthomonas campestris JX, an Industrially Productive Strain for Xanthan Gum

    OpenAIRE

    Tao, Fei; Wang, Xia; Ma, Cuiqing; Yang, Chunyu; Tang, Hongzhi; Gai, Zhonghui; Xu, Ping

    2012-01-01

    Xanthomonas campestris JX, a soil bacterium, is an industrially productive strain for xanthan gum. Here we present a 5.0-Mb assembly of its genome sequence. We have annotated 12 coding sequences (CDSs) responsible for xanthan gum biosynthesis, 346 CDSs encoding carbohydrate metabolism, and 69 CDSs related to virulence, defense, and plant disease.

  14. Separation and Identification of Highly Fluorescent Compounds Derived from trans-Resveratrol in the Leaves of Vitis vinifera Infected by Plasmopara viticola

    Czech Academy of Sciences Publication Activity Database

    Tříska, Jan; Vrchotová, Naděžda; Olejníčková, Julie; Jílek, Rudolf; Sotolar, R.

    2012-01-01

    Roč. 17, č. 3 (2012), s. 2773-2783. ISSN 1420-3049 R&D Projects: GA MŠk(CZ) ED1.1.00/02.0073 Institutional support: RVO:67179843 Keywords : trans-resveratrol * 2,4,6-trihydroxyphenanthrene-2-O-glucoside * Plasmopara viticola Subject RIV: EH - Ecology, Behaviour Impact factor: 2.428, year: 2012

  15. Thiamine induced resistance to Plasmopara viticola in grapevine and elicited host-defense responses, including HR like-cell death.

    Science.gov (United States)

    Boubakri, Hatem; Wahab, Mohamed Ali; Chong, Julie; Bertsch, Christophe; Mliki, Ahmed; Soustre-Gacougnolle, Isabelle

    2012-08-01

    Recently, thiamine (VitaminB1) has been shown to induce resistance against Pseudomonas syringae in Arabidopsis plants through priming of defense responses. In this paper, we have demonstrated the efficiency of thiamine to induce resistance against downy mildew caused by the oomycete Plasmopara viticola in a susceptible Vitis vinifera cultivar "Chardonnay" under glasshouse controlled conditions by providing a dual mode of action involving direct antifungal activity and elicitation of host-defense responses. Thiamine-induced defense responses included the generation of hydrogen peroxide (H(2)O(2)) in both grapevine suspension cultured cells (SCC) and plant leaves, upregulation of an array of defense-related genes and the induction of other defense responses at subcellular level such as callose deposition in stomata cells, phenolic compounds accumulation and hypersensitive response (HR) like-cell death. Epifluorescence microscopy studies revealed dramatic changes in P. viticola individual developmental stages during its colonization of the intercellular space of the leaf mesophyll in thiamine-treated plants. Collectively, our report evidenced the efficiency of thiamine in the control of downy mildew in grapevine by direct and indirect effects, suggesting that thiamine could be an attractive alternative to chemical fungicides in disease management in vineyards. PMID:22698755

  16. Khatmiamycin, a motility inhibitor and zoosporicide against the grapevine downy mildew pathogen Plasmopara viticola from Streptomyces sp. ANK313.

    Science.gov (United States)

    Abdalla, Muna Ali; Win, Hnin Yu; Islam, Md Tofazzal; von Tiedemann, Andreas; Schüffler, Anja; Laatsch, Hartmut

    2011-10-01

    In the course of our screening for anti-peronosporomycetal agents, we isolated a new compound khatmiamycin (1), together with five known metabolites, GTRI-02 (3), 4-ethyl-5-methyl-heptanamide (4), aloesaponarin II (5), LL-C10037α (6) and LL-C10037β (7) from the culture broth of a terrestrial Streptomyces sp. ANK313. The structures of these metabolites were assigned on the basis of their spectroscopic data. Khatmiamycin (1) exhibited potent motility inhibitory (100%) and lytic (83±7%) activities against zoospores of the grapevine downy mildew pathogen Plasmopara viticola at 10 μg ml(-1), followed by compounds 5 (MIC 25 μg ml(-1)), 7, 6, 3 in the order of decreasing activity. Khatmiamycin (1) also showed potent antibacterial activity against Staphylococcus aureus and Streptomyces viridochromogenes (Tü57) by causing inhibition zones of 11 and 14 mm diameter, respectively, at the dose of 40 μg per disk. This is the first report on motility inhibitory and lytic activities of metabolites from a terrestrial Streptomyces species against the zoospores of downy mildew pathogen P. viticola. PMID:21811263

  17. PV water pumping: NEOS Corporation recent PV water pumping activities

    Energy Technology Data Exchange (ETDEWEB)

    Lane, C.

    1995-11-01

    NEOS Corporation has been very active in PV-powered water pumping, particularly with respect to electric utilities. Most of the recent activity has been through the Photovoltaic Services Network (PSN). The PSN is an independent, not-for-profit organization comprised of all types of electric utilities: rural electric coops, public power districts, investor-owned utilities, and power marketing agencies. The PSN`s mission is to work pro-actively to promote utility involvement in PV through education and training. PV information is distributed by the PSN in three primary forms: (1) consultation with PSN technical service representatives: (2) literature generated by the PSN; and (3) literature published by other organizations. The PSN can also provide assistance to members in developing PV customer service programs. The PSN`s product support activities include consolidation of information on existing packaged PV systems and facilitation of the development of new PV product packages that meet utility-defined specifications for cost performance, and reliability. The PSN`s initial product support efforts will be focused on commercially available packaged PV systems for a variety of off-grid applications. In parallel with this effort, if no products exist that meet the PSN`s functional specifications, the PSN will initiate the second phase of product development support process by encouraging the development of new packaged systems. Through these services and product support activities, the PSN anticipates engaging all segments for the PV industry, thus providing benefits to PV systems suppliers as well as local PV service contractors.This paper describes field testing of pv power systems for water pumping.

  18. Outdoor PV Degradation Comparison

    Energy Technology Data Exchange (ETDEWEB)

    Jordan, D. C.; Smith, R. M.; Osterwald, C. R.; Gelak, E.; Kurtz, S. R.

    2011-02-01

    As photovoltaic (PV) penetration of the power grid increases, it becomes vital to know how decreased power output; may affect cost over time. In order to predict power delivery, the decline or degradation rates must be determined; accurately. At the Performance and Energy Rating Testbed (PERT) at the Outdoor Test Facility (OTF) at the; National Renewable Energy Laboratory (NREL) more than 40 modules from more than 10 different manufacturers; were compared for their long-term outdoor stability. Because it can accommodate a large variety of modules in a; limited footprint the PERT system is ideally suited to compare modules side-by-side under the same conditions.

  19. Sensorless PV Array Diagnostic Method for Residential PV Systems

    DEFF Research Database (Denmark)

    Sera, Dezso; Spataru, Sergiu; Mathe, Laszlo; Kerekes, Tamas; Teodorescu, Remus

    This work proposes a temperature and irradiance sensorless diagnostic method suitable for small residential PV installations, focusing on detection of partial shadows. The method works by detection of failures in crystalline silicone PV arrays by concomitant monitoring of some of their key...

  20. Interband cascade (IC) photovoltaic (PV) architecture for PV devices

    Science.gov (United States)

    Yang, Rui Q.; Tian, Zhaobing; Mishima, Tetsuya D.; Santos, Michael B.; Johnson, Matthew B.; Klem, John F.

    2015-10-20

    A photovoltaic (PV) device, comprising a PV interband cascade (IC) stage, wherein the IC PV stage comprises an absorption region with a band gap, the absorption region configured to absorb photons, an intraband transport region configured to act as a hole barrier, and an interband tunneling region configured to act as an electron barrier. An IC PV architecture for a photovoltaic device, the IC PV architecture comprising an absorption region, an intraband transport region coupled to the absorption region, and an interband tunneling region coupled to the intraband transport region and to the adjacent absorption region, wherein the absorption region, the intraband transport region, and the interband tunneling region are positioned such that electrons will flow from the absorption region to the intraband transport region to the interband tunneling region.

  1. INFLUENCE OF EPIDEMIOLOGICAL FACTORS ON THE BIOHERBICIDAL EFFICACY OF A Xanthomonas campestris ISOLATE ON COMMON COCKLEBUR ( Xanthium strumarium )

    OpenAIRE

    C. Douglas Boyette; Robert E. Hoagland

    2013-01-01

    Greenhouse and controlled-environment studies were conducted to determine the effects of incubation temperature, dew period temperature, dew period duration, plant growth stage, and cell concentration on the bioherbicidal efficacy of a highly virulent isolate (LVA987) of the bacterial pathogen,Xanthomonas campestris, against Xanthium strumarium (common cocklebur). X. campestris infected cocklebur at 20, 25, 30, and 35ºC but the disease achieved at 20ºC was not sufficient to cause high plant m...

  2. Genetic and Physical Analyses of a Cluster of Genes Essential for Xanthan Gum Biosynthesis in Xanthomonas campestris

    OpenAIRE

    Harding, N E; Cleary, J M; Cabañas, D K; Rosen, I G; K.S. Kang

    1987-01-01

    Xanthomonas campestris produces copious amounts of a complex exopolysaccharide, xanthan gum. Nonmucoid mutants, defective in synthesis of xanthan polysaccharide, were isolated after nitrosoguanidine mutagenesis. To isolate genes essential for xanthan polysaccharide synthesis (xps), a genomic library of X. campestris DNA, partially digested with SalI and ligated into the broad-host-range cloning vector pRK293, was constructed in Escherichia coli. The pooled clone bank was conjugated en masse f...

  3. Ação de quitosana sobre o desenvolvimento de Plasmopara viticola e Elsinoe ampelina, in vitro e em videiras cv. Isabel Chitosan action on Plasmopara viticola and Elsinoe ampelina development in vitro and in grapevines cv. Isabel

    Directory of Open Access Journals (Sweden)

    Aline José Maia

    2010-09-01

    Full Text Available Este trabalho teve como objetivos avaliar o efeito da quitosana no controle dos fungos Plasmopara viticola e Elsinoe ampelina, agentes causais do míldio e da antracnose da videira, respectivamente. As concentrações de 0, 20, 40, 80 e 160 mg L-1 de quitosana foram utilizadas nos seguintes experimentos: testes de crescimento micelial, de germinação de esporos e ensaio em condições de campo. Para os dois últimos ensaios, adicionou-se tratamentos padrões com mancozeb e calda bordalesa. Verificou-se redução no crescimento micelial de E. ampelina sendo que a maior concentração de quitosana (160 mg L-1 reduziu em 57% o desenvolvimento do fungo, 192 horas após incubação. Nos testes de germinação, a dose de 160 mg L-1 de quitosana reduziu a germinação de esporos de E. ampelina em aproximadamente 98% e de P. viticola em 60%, não diferindo dos tratamentos com calda bordalesa e mancozeb. Nos ensaios a campo as maiores doses de quitosana (80 e 160 mg L-1 apresentaram um decréscimo na severidade de antracnose entre 93 e 81%. Para o míldio, a concentração de 160 mg L-1 apresentou um decréscimo de aproximadamente 81%. Baseando-se nestes resultados, pode-se concluir que a quitosana tem um grande potencial no controle do míldio e da antracnose da videira.This work aimed to evaluate the effect of chitosan on the control of fungi Elsinoe ampelina and Plasmopara viticola, the causal agents of downy mildew and anthracnose in grapevines, respectively. The concentrations of 0, 20, 40, 80 and 160 mg L-1 chitosan were used in the following trials: mycelial growth, spore germination, and experiment in field conditions. For the last two trials standard treatments with mancozeb and bordeax mixture were added. There was a reduction in E. ampelina mycelial growth and the highest chitosan concentration (160 mg L-1 decreased by 57% the fungus development at 192 hours after incubation. In the germination tests, the concentration of 160 mg L-1 chitosan

  4. Dispersão anemófila de esporangiospóros de Plasmopara viticola em cultivos protegido e convencional de videira Aerial dispersion of Plasmopara viticola spores in covered and conventional cultivation of grapevine

    Directory of Open Access Journals (Sweden)

    Geraldo Chavarria

    2009-09-01

    Full Text Available No presente trabalho, foram avaliadas as taxas de dispersão anemófila de esporangiósporos de Plasmopara viticola nos ciclos de 2005/06 e 2006/07 e sua correlação com o microclima, em vinhedo sob cobertura plástica e em cultivo convencional. Foi utilizado vinhedo comercial da cultivar Moscato Giallo (Vitis vinifera L., localizado em Flores da Cunha-RS (29° 06'S, 51° 20'O, 541 m. Este foi coberto com plástico impermeável tipo ráfia (160 µm, de 12 fileiras com 35 m, deixando-se cinco fileiras sem cobertura (controle. O microclima do vinhedo foi avaliado próximo ao dossel vegetativo, em ambos tratamentos, considerando: temperatura, umidade relativa, velocidade do vento e precipitação pluvial. A presença de esporos em cada área foi determinada por coletores de esporos, utilizando fitas transparentes, untadas com solução adesiva de gelvatol. Semanalmente, as fitas foram retiradas das armadilhas e postas em lâminas de microscopia, das quais, em cada ciclo, foram selecionadas 20, dias de cada sistema de cultivo e analisado com auxílio de microscópio. O vinhedo sob cobertura plástica apresentou maior quantidade de dispersão anemófila de esporangiósporos de Plasmopara viticola. Maiores dispersões anemófilas destes esporangiósporos foram observadas no período da tarde, independentemente do sistema de cultivo.In the present study it was evaluated the aerial dispersion rate of Plasmopara viticola spores during 2005/06 and 2006/07 seasons and their relation with microclimate under covered and conventional cultivation of grapevine. A commercial vineyard of Moscato Giallo cultivar (Vitis vinifera L. in Flores da Cunha, RS (29° 06'S, 51° 20'W, 541 m was used. It comprised twelve rows of plants covered with a transparent plastic (raffia type - 160 µm and five uncovered rows of plants, each row with 35m of length. The microclimate was evaluated, in terms of air temperature, air relative humidity, wind speed and pluvial

  5. Flavonóides O-glicosilados de Croton campestris St. Hill. (Euphorbiaceae Glycosyl flavonoids from Croton campestris St. Hill. (Euphorbiaceae

    Directory of Open Access Journals (Sweden)

    Paula M.L. dos Santos

    2005-12-01

    Full Text Available Do extrato butanólico de Croton campestris St. Hill. (Euphorbiaceae foram isolados quatro flavonóides, todos O-glicosídeos da quercetina. Estas substâncias foram identificadas como 3-O-b-D-apiofuranosil-(1®2-galactopiranosil quercetina (1, 3-O-b-D-galactopiranosil quercetina (hiperina (2, 3-O-a-L-arabinopiranosil quercetina (guaijaverina (3 e 3-O-a-L-ramnopiranosil quercetina (quercitrina (4.O presente trabalho relata a presença destas substâncias pela primeira vez para esta espécie de Croton, cuja elucidação estrutural deu-se por espectroscopia em UV, EM e RMN, incluindo as técnicas bidimensionais: ¹H-¹H (2D NOESY, 2D COSY, ¹H-13C (2D HETCOR e 13C (APT, além de comparações com os dados da literatura.Four flavonoids were isolated from the butanolic extract of the aerial parts of Croton campestris St. Hill. (Euphorbiaceae. These compounds were identified as 3-O-b-D-apiofuranosyl-(1®2-galactopyranoside quercetin (1, 3-O-b-D-galactopyranoside quercetin (hyperin (2, 3-O-a-L-arabinopyranoside quercetin (guaijaverin (3 and 3-O-a-L-ramnopyranoside quercetin (quercitrin (4. They have been isolated for the first time from Croton campestris. Their structures were elucidated by UV, MS and NMR experiments including ¹H-¹H (2D NOESY, 2D COSY, ¹H-13C (2D HETCOR, 13C (APT and by comparison of the spectral data with those reported in the literature.

  6. Flavonóides O-glicosilados de Croton campestris St. Hill. (Euphorbiaceae) Glycosyl flavonoids from Croton campestris St. Hill. (Euphorbiaceae)

    OpenAIRE

    Paula M.L. dos Santos; Jan Schripsema; Ricardo M. Kuster

    2005-01-01

    Do extrato butanólico de Croton campestris St. Hill. (Euphorbiaceae) foram isolados quatro flavonóides, todos O-glicosídeos da quercetina. Estas substâncias foram identificadas como 3-O-b-D-apiofuranosil-(1®2)-galactopiranosil quercetina (1), 3-O-b-D-galactopiranosil quercetina (hiperina) (2), 3-O-a-L-arabinopiranosil quercetina (guaijaverina) (3) e 3-O-a-L-ramnopiranosil quercetina (quercitrina) (4).O presente trabalho relata a presença destas substâncias pela primeira vez para esta espécie ...

  7. Effect of virulence and serial transfers of Xanthomonas campestris on xanthan gum production

    Directory of Open Access Journals (Sweden)

    Nitschke Marcia

    2000-01-01

    Full Text Available The virulence of six Xanthomonas campestris isolates was evaluated using the percentage of lesion area of leaves in Brassica oleraceae host plant, compared to diameter of colonies, xanthan production and gum viscosity. In terms of virulence, the isolates belonged to two statistically different groups: isolates B, UPF and C7 showed values between 52 and 69%, while isolates CF, C and strain B-1459 gave 0-30% of lesion area. Final xanthan concentration, gum viscosity and colony diameter did not correlate with virulence calculated by percentage of lesion area, showing that this parameter is not a good criterium for selection of potential xanthan producer isolates. Serial transfers of X. campestris isolates in host plant did not show a significant effect on "in vitro" production of xanthan or on viscosity levels, suggesting that the increasing interaction between plant and bacteria did not stimulate the increase in xanthan production and viscosity.

  8. Growth of Agaricus campestris NRRL 2334 in the Form of Pellets

    OpenAIRE

    Martin, Antonio M.; Bailey, Valerie I.

    1985-01-01

    The production of pellets of the fungus Agaricus campestris NRRL 2334 was studied in submerged fermentation with peat extract as the main substrate source. Pellets up to 6 mm in diameter were obtained when the peat extract was diluted to reduce the concentration of growth inhibitors. Yeast extract and yeast extract plus glucose were the most effective nutrient supplements in the diluted peat extract media and stimulated the formation of large pellets which contained 44.4% crude protein, 2.8% ...

  9. Effect of virulence and serial transfers of Xanthomonas campestris on xanthan gum production

    OpenAIRE

    Nitschke Marcia; Rodrigues Vanessa

    2000-01-01

    The virulence of six Xanthomonas campestris isolates was evaluated using the percentage of lesion area of leaves in Brassica oleraceae host plant, compared to diameter of colonies, xanthan production and gum viscosity. In terms of virulence, the isolates belonged to two statistically different groups: isolates B, UPF and C7 showed values between 52 and 69%, while isolates CF, C and strain B-1459 gave 0-30% of lesion area. Final xanthan concentration, gum viscosity and colony diameter did not ...

  10. Low-Pressure Plasma Application for the Inactivation of the Seed-borne Pathogen Xanthomonas campestris.

    Science.gov (United States)

    Nishioka, Terumi; Takai, Yuichiro; Mishima, Tomoko; Kawaradani, Mitsuo; Tanimoto, Hideo; Okada, Kiyotsugu; Misawa, Tatsuya; Kusakari, Shinichi

    2016-01-01

    The aim of this study was to investigate the effect of low-pressure plasma treatment on seed disinfection and the possible mechanisms underlying this effect. Seed-borne disease refers to plant diseases that are transmitted by seeds; seed disinfection is an important technique for prevention of such diseases. In this study, the effectiveness of low-pressure plasma treatment in the inactivation of the seed-borne plant pathogenic bacterium, Xanthomonas campestris, inoculated on cruciferous seeds, was evaluated. The highest inactivation effect was observed when the treatment voltage and argon gas flow rate were 5.5 kV and 0.5 L/min, respectively. The viable cell number of X. campestris was 6.6 log cfu/seed before plasma treatment, and decreased by 3.9 log after 5 min of treatment and by 6.6 log after 40 min. Ethidium monoazide treatment and quantitative real-time PCR results indicated that both the cell membrane and target DNA region were damaged following 5 min of plasma treatment. Although both heat and ozone were generated during the plasma treatment, the contribution of both factors to the inactivation of X. campestris was small by itself in our low-pressure plasma system. Overall, we have shown that our low-pressure plasma system has great applicability to controlling plant pathogenic bacterium contamination of seeds. PMID:27009508

  11. Small scale production and characterization of xanthan gum synthesized by local isolates of Xanthomonas campestris.

    Science.gov (United States)

    Barua, Rajesh; Alam, Md Jahangir; Salim, Mohammad; Ashrafee, Tamzida Shamim

    2016-02-01

    Xanthan gum is a commercially important microbial exopolysaccharide (EPS) produced by Xanthomonas campestris. X. campestris is a plant pathogen causing various plant diseases such as black rot of crucifers, bacterial leaf blight and citrus canker disease resulting in crop damage. In this study, we isolated efficient local bacterial isolates which are capable to produce xanthan gum utilizing different sources of carbon (maltose, sucrose and glucose). Bacterial isolates from different plant leaves and fruits were identified as Xanthomonas campestris based on their morphological and biochemical characteristics. Among the 23 isolates, 70% were capable of producing gum. Taro plant, considered as new bacterial host, also have the capability to produce xanthan gum. Production conditions of xanthan gum and their relative viscosity by these bacterial isolates were optimized using basal medium containing commercial carbon and nitrogen sources and various temperature and rotation. Highest level of xanthan gum (18.286 g/l) with relative viscosity (7.2) was produced (Host, Citrus macroptera) at 28 degrees C, pH 7.0, 150 rpm using sucrose as a carbon source at orbital shaker. Whereas, in lab fermenter, same conditions gave best result (19.587 g/l gum) with 7.8 relative viscosity. Chilled alcohol (96%) was used to recover the xanthan gum. FTIR studies also carried out for further confirmation of compatibility by detecting the chemical groups. PMID:26934783

  12. PV in a sports arena; PV im Hexenkessel

    Energy Technology Data Exchange (ETDEWEB)

    Hoeche, B.

    2008-05-19

    The German soccer club Werder Bremen is reconstructing its stadium. Apart from higher spectator comfort and a better atmosphere, there will also be PV systems on the roof and external walls of the arena. (orig.)

  13. Speedometers for PV generators; Drehzahlmesser fuer PV-Generatoren

    Energy Technology Data Exchange (ETDEWEB)

    Fritze, Peter; Weinreich, Bernhard [Solarschmiede GmbH, Muenchen (Germany). Engineering-Abt.

    2011-05-31

    To measure the generator power of an installed PV system, it is not enough to look into the specifications of hte module producers. Fast and independent data can be provided by characteristic curve meters.

  14. Image analysis methods for assessment of H2O2 production and Plasmopara viticola development in grapevine leaves: application to the evaluation of resistance to downy mildew.

    Science.gov (United States)

    Kim Khiook, Ian Li; Schneider, Charles; Heloir, Marie-Claire; Bois, Benjamin; Daire, Xavier; Adrian, Marielle; Trouvelot, Sophie

    2013-11-01

    The grapevine downy mildew (Plasmopara viticola) provokes severe damages and destroys the harvest in the absence of an effective protection. Numerous fungicide treatments are thus generally necessary. To promote a sustainable production, alternative strategies of protection including new antifungal molecules, resistant genotypes or elicitor-induced resistance are under trial. To evaluate the relevance of these strategies, resistance tests are required. In this context, three image analysis methods were developed to read the results of tests performed to assess P. viticola sporulation and mycelial development, and H(2)O(2) production in leaves. They have been validated using elicitors of plant defenses. These methods are reliable, innovative, rapid, and their modular concept allows their further adaptation to other host-pathogen systems. PMID:23994353

  15. Separation and identification of highly fluorescent compounds derived from trans-resveratrol in the leaves of Vitis vinifera infected by Plasmopara viticola.

    Science.gov (United States)

    Tříska, Jan; Vrchotová, Naděžda; Olejníčková, Julie; Jílek, Rudolf; Sotolář, Radek

    2012-01-01

    A method for identification of highly fluorescent compounds in vine leaves infected by Plasmopara viticola was developed using reversed phase liquid chromatography with simultaneous diode array and fluorometric detection. Fluorescent compounds were extracted from leaves with a methanol-water mixture (70:30). Separation by HPLC was performed using a C(18) column and gradient elution with water-acetonitrile mixtures (20-80% of acetonitrile). The main unknown fluorescent compound was identified by line spectral comparison with a standard obtained by UV photoisomerization of trans-resveratrol glucoside, and its structure was confirmed by liquid chromatography-mass spectrometry. Identification and structural elucidation of the fluorescent compound in the leaves of Vitis vinifera allows early detection of Plasmopara viticola invasion. PMID:22395406

  16. Field Efficacy of Fluopicolide and Fosetyl-Al Fungicide Combination (Profiler® for Control of Plasmopara viticola (Berk. & Curt. Berl. & Toni. in Grapevine

    Directory of Open Access Journals (Sweden)

    Emil Rekanović

    2008-01-01

    Full Text Available The efficacy of new fungicide mixtures in controlling Plasmopara viticola in grapevine was evaluated in field trials. The efficacies of Profiler (fluopicolide + fosetyl-Al and the standard fungicide Mikal Flash (fosetyl-Al + folpet were tested at Radmilovac and Slankamenački Vinogradi in 2006 and 2007. Both tested fungicides exhibited high efficacy in controlling grape downy mildew. There were no significant differencies in the efficacies of Profiler(96.1-99.7% and Mikal Flash (94.9-99.2%. Our experiments showed that the investigated fungicide mixture fluopicolide + fosetyl-Al is highly effective against P. viticola, even when it it is applied at long intervals and under high disease pressure.

  17. Separation and Identification of Highly Fluorescent Compounds Derived from trans-Resveratrol in the Leaves of Vitis vinifera Infected by Plasmopara viticola

    Directory of Open Access Journals (Sweden)

    Radek Sotolář

    2012-03-01

    Full Text Available A method for identification of highly fluorescent compounds in vine leaves infected by Plasmopara viticola was developed using reversed phase liquid chromatography with simultaneous diode array and fluorometric detection. Fluorescent compounds were extracted from leaves with a methanol-water mixture (70:30. Separation by HPLC was performed using a C18 column and gradient elution with water-acetonitrile mixtures (20–80% of acetonitrile. The main unknown fluorescent compound was identified by line spectral comparison with a standard obtained by UV photoisomerization of trans-resveratrol glucoside, and its structure was confirmed by liquid chromatography-mass spectrometry. Identification and structural elucidation of the fluorescent compound in the leaves of Vitis vinifera allows early detection of Plasmopara viticola invasion.

  18. THE SUSCEPTIBILITY OF TOKAY VINE VARIETIES TO ERYSIPHE NECATOR SCHWEIN.,AND PLASMOPARA VITICOLA (BERK. M.A.CURTIS BERL. DE TONI.

    Directory of Open Access Journals (Sweden)

    Jarmila EFTIMOVÁ

    2012-09-01

    Full Text Available On defined production sites in the closed Tokay region only three varieties (cv. Lipovina, cv. Yellow Muscat and cv. Furmint were grown for several centuries. Objective of the research from 2005-2008 was to examine whether there is a change in varieties susceptibility to Plasmopara viticola (Berk. M.A.Curtis Berl.De Toni and Erysiphe necator Schwein., on four sites located from 105 to 320 AMSL were observed how the infection and pathogen spreading in both diseases were affected by climate factors, site location and the architecture of stand. We found out that the development and progression of infection depends on the susceptibility of leaves where fungi reproductive organs are growing and the dimension of infection source. The results showed that most sensitively responded to Erysiphe necator the Lipovina variety, with its very fine leaves. Cv. Furmint and cv. Muscat yellow were moderately responsive. Raphis and berries are very sensitive in all development stages.Dissemination of ascospores and Erysiphe necator conidia are spatially bounded, therefore, depending on microclimate, site location and stand architecture. The most sensitive response to infection by Plasmopara viticola was observed in cv. Lipovina, medium-sensitive in cv. Furmint, and the smallest in cv. Yellow Muscat. Especially young berries are very susceptible to infection. We found out that cv. Lipovina, Furmint and Yellow Muscat were most sensitive to infection by Plasmopara viticola and Erysiphe necator during the phenophase BBCH 68, when 80% of flowers fade away. The research found out that vines planted on sites with altitude from 105 to150 AMSL, in closed locations without any green work made were infected by Plasmopara viticola strongly.

  19. PSCAD Modules Representing PV Generator

    Energy Technology Data Exchange (ETDEWEB)

    Muljadi, E.; Singh, M.; Gevorgian, V.

    2013-08-01

    Photovoltaic power plants (PVPs) have been growing in size, and the installation time is very short. With the cost of photovoltaic (PV) panels dropping in recent years, it can be predicted that in the next 10 years the contribution of PVPs to the total number of renewable energy power plants will grow significantly. In this project, the National Renewable Energy Laboratory (NREL) developed a dynamic modeling of the modules to be used as building blocks to develop simulation models of single PV arrays, expanded to include Maximum Power Point Tracker (MPPT), expanded to include PV inverter, or expanded to cover an entire PVP. The focus of the investigation and complexity of the simulation determines the components that must be included in the simulation. The development of the PV inverter was covered in detail, including the control diagrams. Both the current-regulated voltage source inverter and the current-regulated current source inverter were developed in PSCAD. Various operations of the PV inverters were simulated under normal and abnormal conditions. Symmetrical and unsymmetrical faults were simulated, presented, and discussed. Both the three-phase analysis and the symmetrical component analysis were included to clarify the understanding of unsymmetrical faults. The dynamic model validation was based on the testing data provided by SCE. Testing was conducted at SCE with the focus on the grid interface behavior of the PV inverter under different faults and disturbances. The dynamic model validation covers both the symmetrical and unsymmetrical faults.

  20. Locational Sensitivity Investigation on PV Hosting Capacity and Fast Track PV Screening

    Energy Technology Data Exchange (ETDEWEB)

    Ding, Fei; Mather, Barry; Ainsworth, Nathan; Gotseff, Peter; Baker, Kyri

    2016-05-05

    A 15% PV penetration threshold is commonly used by utilities to define photovoltaic (PV) screening methods where PV penetration is defined as the ratio of total solar PV capacity on a line section to peak load. However, this method doesn't take into account PV locational impact or feeder characteristics that could strongly change the feeder's capability to host PVs. This paper investigates the impact of PV location and phase connection type on PV hosting capacity, and then proposes a fast-track PV screening approach that leverages various PV hosting capacity metric responding to different PV locations and types. The proposed study could help utilities to evaluate PV interconnection requests and also help increase the PV hosting capacity of distribution feeders without adverse impacts on system voltages.

  1. PV solar system feasibility study

    International Nuclear Information System (INIS)

    Highlights: ► This research studies the feasibility of PV solar systems. ► The aim is to develop the theory and application of a hybrid system. ► Relevant research topics are reviewed and some of them are discussed in details. ► A prototype of the PV solar system is designed and built. - Abstract: This research studies the feasibility of PV solar systems and aims at developing the theory and application of a hybrid system that utilizes PV solar system and another supporting source of energy to provide affordable heating and air conditioning. Relevant research topics are reviewed and some of them are discussed in details. Solar heating and air conditioning research and technology exist in many developed countries. To date, the used solar energy has been proved to be inefficient. Solar energy is an abundant source of energy in Jordan and the Middle East; with increasing prices of oil this source is becoming more attractive alternative. A good candidate for the other system is absorption. The overall system is designed such that it utilizes solar energy as a main source. When the solar energy becomes insufficient, electricity or diesel source kicks in. A prototype of the PV solar system that operates an air conditioning unit is built and proper measurements are collected through a data logging system. The measured data are plotted and discussed, and conclusions regarding the system performance are extracted.

  2. Crystallization and preliminary X-ray diffraction characterization of the XccFimXEAL–c-di-GMP and XccFimXEAL–c-di-GMP–XccPilZ complexes from Xanthomonas campestris

    International Nuclear Information System (INIS)

    Crystals of the XccFimXEAL–c-di-GMP and SeMet-XccFimXEAL–c-di-GMP–XccPilZ complexes from X. campestris diffracted to resolutions of 2.5 and 2.7 Å, respectively. c-di-GMP is a major secondary-messenger molecule in regulation of bacterial pathogenesis. Therefore, the c-di-GMP-mediated signal transduction network is of considerable interest. The PilZ domain was the first c-di-GMP receptor to be predicted and identified. However, every PilZ domain binds c-di-GMP with a different binding affinity. Intriguingly, a noncanonical PilZ domain has recently been found to serve as a mediator to link FimXEAL to the PilB or PilT ATPase to control the function of type IV pili (T4P). It is thus essential to determine the structure of the FimXEAL–PilZ complex in order to determine how the binding of c-di-GMP to the FimXEAL domain induces conformational change of the adjoining noncanonical PilZ domain, which may transmit information to PilB or PilT to control T4P function. Here, the preparation and preliminary X-ray diffraction studies of the XccFimXEAL–c-di-GMP and XccFimXEAL–c-di-GMP–XccPilZ complexes from Xcc (Xanthomonas campestris pv. campesteris) are reported. Detailed studies of these complexes may allow a more thorough understanding of how c-di-GMP transmits its effects through the degenerate EAL domain and the noncanonical PilZ domain

  3. IDENTIFICATION OF ANTAGONISTS OF Xanthomonas campestris ISOLATED FROM RHIZOSPHERE ZONE OF BROCCOLI FARM AT KEMBANG MERTA VILLAGE, TABANAN, BALI

    Directory of Open Access Journals (Sweden)

    Nadya Treesna Wulansari

    2015-03-01

    Full Text Available The main objectives of this research were to isolate and identify antagonists of Xanthomonas campestris from rhizosphere zone of broccoli plants. Soil samples were collected from broccoli farm located at Kembang Merta village, Tabanan, Bali. Isolation and identification of the antagonists were conducted at the Laboratory of Microbiology, Udayana University. Two fungal (Trichoderma harzianum and Trichoderma viride and two bacterial (Bacillus sp. and Pseudomonas sp. antagonists potentially to be developed as biocontrol agents of Xanthomonas campestris were successfully identified in this research

  4. Distribution and harmfulness of field dodder (Cuscuta campestris Yuncker at sugar beet fields in Slovakia

    Directory of Open Access Journals (Sweden)

    Tóth Peter

    2006-01-01

    Full Text Available During 2002-2004, field surveys of field dodder (Cuscuta campestris Yunck e r in croplands were done in southwestern Slovakia. From among 150 localities surveyed, 80 were found infested by the field dodder. Within crop plants, C. campestris infested sugar beet (Beta vulgaris, alfalfa (Medicago sativa tobacco (Nicotiana tabacum, potato (Solanum tuberosum, lentil (Lens esculenta, parsley (Pastinaca sativa and onion (Allium cepa. Besides the crops, 18 weed species were also recorded. The species from the genus Polygonum (Polygonaceae were the most important and acted as a significant reservoir of field dodder in cropland. C. campestris was not found in cold climatic regions with altitude higher than 240 m. The impact of field dodder infestation on sugar beet yield was studied during the year of 2004 in two localities (Šalov and Žitavce in southwestern Slovakia. The presence of field dodder markedly reduced both, quantity and quality of sugar beet yield. Weight of heavily infested beets was reduced from 21.6 to 37.4% and sugar content from 12.0 to 15.2%. Such decline of both parameters was also recorded when field dodder was removed together with leaves of sugar beet during growing season at the end of July. The aim of the infested leaves removal was to decrease mass of field dodder seeds. Although the leaf area of sugar beet regenerates, the decrease of quality and quantity was observed. The decline was the same at both localities, no matter whether the fields were irrigated (Šalov or not (Žitavce.

  5. Interspecific Hybridization of Brassica campestris x B.Oleracea Through Ovary Culture

    Institute of Scientific and Technical Information of China (English)

    ZHANG Guo-qing; SONG Wen-jian; TANG Gui-xiang; ZHOU Wei-jun

    2004-01-01

    Using three varieties of Brassica campestris, Hauarad (708), Maoshan-3 (714) and Youbai (715),as the maternal plants and one variety of Brassica oleracea Jingfeng-1 (6012) as paternal plants, crosses were made to produce interspecific hybrids through ovary culture techniques.The ovaries from the cross between B. campestris × B.oleracea (708 × 6012 and 714 × 6012) were cultured and ovary culture was more effective in terms of obtained seeds when ovaries were cultured in vitro at 9 d after pollination (DAP). While for the cross of 715 × 6012, it was better when ovaries in vitro cultured at 12 DAP. Among three cross combinations, the cross of 714 × 6012 showed the best response and 43 seeds per ovary were obtained. Among the media studied, the ovaries from the cross of 708 × 6012 cultured on MS media supplemented with 3.0 mg L-1 BA × 0.1 mg L-1 NAA showed better response, and its rate of seeds per ovary reached 44.0%.While the ovaries from the other two crosses (714 × 6012 and 715 × 6012) showed the best response when cultured on B5 media supplemented with 3.0 mg L-1 BA + 0.2 mg L-1 NAA, and the rates of seeds per ovary reached 72.0 and 60.0%, respectively. All seeds obtained from the three cross combinations were cultured on the MS media supplemented with 1.0 mg L-1 BA + 0.05 mg L-1 NAA,and the seeds from the cross of 715 × 6012 showed the best germination response and the percentage of germinations reached 66.7%. The regenerated plantlets were obtained from these seedlings after cultured on the MS media supplemented with 0.05 mg L-1 NAA. Cytological study showed that these regenerated plants were all true hybrids of B.campestris × B.oleracea.

  6. Searching for a trace of Artemisia campestris pollen in the air

    Directory of Open Access Journals (Sweden)

    Łukasz Grewling

    2015-12-01

    Full Text Available The aim of the study was to determinate whether Artemisia campestris was present in the vicinity of 8 pollen monitoring stations in Poland by examining temporal variations in daily average airborne Artemisia pollen data recorded by Hirst type volumetric traps. Three day moving averages of airborne Artemisia pollen were examined by Spearman’s rank correlation test. Results show that Artemisia pollen seasons in Poland generally display similar unimodal patterns (correlation coefficients r > 0.900; P < 0.05. The only exception was the Artemisia pollen concentration noted in the outskirts of Poznań (Morasko, where the bimodal pattern was revealed. Correlations between Artemisia pollen data recorded at Poznań-Morasko and the other Polish sites were the lowest in the investigated dataset; this was particularly noticeable in the second part of pollen season (r ~0.730. We show that the typical bimodal pattern in Artemisia pollen seasons, which is characteristic of the presence of both A. vulgaris (first peak and A. campestris (second peak, does not occur at the majority of sites in Poland and is restricted to the outskirts of Poznań. In fact, it was noted that the pollen monitoring site in Poznań-Centre, just 8 km from Morasko, only exhibited one peak (attributed to A. vulgaris. This shows that the influence of A. campestris on airborne pollen season curves is limited and can be largely disregarded. In addition, this study supports previous records showing that the spatial distribution of airborne Artemisia pollen within a city (urban-rural gradient can vary markedly, depending on the species composition.

  7. Economic PV - a shift in thinking

    International Nuclear Information System (INIS)

    This article argues that photovoltaic (PV) technology is already economically viable contrary to current opinion. A table of world PV module shipments for 1990 to 1998 by market sector is presented, and use of PV modules in consumer electronics such as calculators, battery trickle chargers, and garden lights; in communications and signals (eg. microwave repeaters, cellular communication); and in the residential sector in fluorescent lights, radios etc. are discussed. The early adopters of PV technology, and the value placed on PV devices by consumers are considered. Details of PV manufacturing costs for 1997, and forecasts for 2000 and 2010 are tabulated

  8. Irradiation of mushrooms (Agaricus campestris L) to extend their shelf-life

    International Nuclear Information System (INIS)

    Mushrooms (Agaricus campestris L) were irradiated with 1.0; 2.0 and 3.0 kGy, being then stored either at 10 deg C ± 1 deg C or at room temperature (20 deg C ± 2 deg C), with the purpose of determining the most convenient condition to extend their shelf-life. It is concluded that 3.0 kGy and 10 deg C are the most suitable for that, leading to the inhibition of cap opening and stem elongation, less darkening and no evidence of fungal development until 17th day. Subsequentely almost a duplication of their shelf-life was obtained. (Author)

  9. Genetic diversity analysis for agro-morphological and seed quality traits in rapeseed (brassica campestris l.)

    International Nuclear Information System (INIS)

    One hundred fourteen accessions of rapeseed (Brassica campestris L.) were evaluated at National Agricultural Research Centre, Islamabad, Pakistan using cluster and principal component analyses during 2005 and 2006. Cluster analysis based on fifteen agro-morphological and six seed quality traits, divided 114 accessions into six and five clusters during 2005 and 2006, respectively. The first seven and five PCs with eigenvalues > 1 contributed 74.09% and 66.08% of the variability amongst accessions during 2005 and 2006, respectively. Nine important characters contributed positively to first two PCs during both the years 2005 and 2006. (author)

  10. Development of high yielding mutants of Brassica campestris L. cv. Toria selection through gamma rays irradiation

    International Nuclear Information System (INIS)

    Homogeneous seeds of Brassica campestris L. cv. Toria selection were treated with different doses of gamma rays (750, 1000 and 1250 Gy) to induce genetic variability for the selection of new genotypes with improved agronomic traits. After passing through different stages of selection, two promising mutants were selected for further studies. Two selected mutants along with 5 other entries including parent variety were evaluated for yield and yield components in yield trials for two consecutive years. The mutant TS96-752 was significantly (P less than or equal to 0.05) superior to all other entries in grain yield but at par with FSD 86028-3

  11. Inheritance of oilseed rape (Brassica napus) RAPD markers in a backcross progeny with Brassica campestris

    DEFF Research Database (Denmark)

    Mikkelsen, T.R.; Jensen, J.; Bagger Jørgensen, Rikke

    1996-01-01

    Different cultivars/transgenic lines of oilseed rape (Brassica napus) were crossed (as females) with different cultivars/populations of Brassica campestris. All cross combinations produced seed, with an average seed set per pollination of 9.8. Backcrossing of selected interspecific hybrids (as...... markers could be assigned to six linkage groups, most probably reflecting six B. napus C-chromosomes. The presence of backcross plants with recombinant genotypes suggests that complex genetic processes can take place during the interspecific hybridisation and backcrossing in these Brassica species. The...

  12. Production of High-Viscosity Whey Broths by a Lactose-Utilizing Xanthomonas campestris Strain

    OpenAIRE

    Schwartz, Robert D.; Bodie, Elizabeth A.

    1985-01-01

    Xanthomonas campestris BB-1L was isolated by enrichment and selection by serial passage in a lactose-minimal medium. When BB-1L was subsequently grown in medium containing only 4% whey and 0.05% yeast extract, the lactose was consumed and broth viscosities greater than 500 cps at a 12 s−1 shear rate were produced. Prolonged maintenance in whey resulted in the loss of the ability of BB-1L to produce viscous broths in whey, indicating a reversion to preferential growth on whey protein, like the...

  13. Kinetic models for xanthan gum production using Xanthomonas campestris from molasses

    OpenAIRE

    S.L. GILANI; Najafpour, G.D.; H.D. HEYDARZADEH; H Zare

    2011-01-01

    The effects of media temperature, agitation rate and molasses concentration on the yield of fermentation in xanthan gum production process were investigated. Xanthan gum was produced in batch fermentation by Xanthomonas campestris PTCC 1473 from molasses. At 32 C, 500 rpm and media with 30 g/l of total sugar, maximum production of xanthan gum (17.1 g/l) was achieved. For the purity of the xanthan FTIR spectrum was obtained. The identified spectrum was compared with the commercial product. In...

  14. Location and cloning of the ketal pyruvate transferase gene of Xanthomonas campestris.

    OpenAIRE

    Marzocca, M P; Harding, N E; Petroni, E A; Cleary, J M; Ielpi, L

    1991-01-01

    Genes required for xanthan polysaccharide synthesis (xps) are clustered in a DNA region of 13.5 kb in the chromosome of Xanthomonas campestris. Plasmid pCHC3 containing a 12.4-kb insert of xps genes has been suggested to include a gene involved in the pyruvylation of xanthan gum (N.E. Harding, J.M. Cleary, D.K. Cabañas, I. G. Rosen, and K. S. Kang, J. Bacteriol. 169:2854-2861, 1987). An essential step toward understanding the biosynthesis of xanthan gum and to enable genetic manipulation of x...

  15. Comparison of Pyranometers vs. PV Reference Cells for Evaluation of PV Array Performance

    Energy Technology Data Exchange (ETDEWEB)

    Dunn, L.; Gostein, M.; Emery, K.

    2012-09-01

    As the photovoltaics (PV) industry has grown, the need for accurately monitoring the solar resource of PV power plants has increased. Historically, the PV industry has relied on thermopile pyranometers for irradiance measurements, and a large body of historical irradiance data taken with pyranometers exists. However, interest in PV reference devices is increasing. In this paper, we discuss why PV reference devices are better suited for PV applications, and estimate the typical uncertainties in irradiance measurements made with both pyranometers and PV reference devices. We assert that the quantity of interest in monitoring a PV power plant is the equivalent irradiance under the IEC 60904-3 reference solar spectrum that would produce the same electrical response in the PV array as the incident solar radiation. For PV-plant monitoring applications, we find the uncertainties in irradiance measurements of this type to be on the order of +/-5% for thermopile pyranometers and +/-2.4% for PV reference devices.

  16. Solar PV. Innovators talking; Zon PV. Innovators aan het woord

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-02-15

    Qualitative studies have been conducted of the results of completed projects focused on energy innovation, spread over the seven themes of the top sector Energy: Energy saving in industry, Energy conservation in the built environment, Gas, Bio-energy, Smart grids, Offshore Wind, Solar PV. This provides insight into the follow-up activities and lessons of some EOS (Energy Research Subsidy) completed projects with the aim to inspire, connect and strengthen the TKIs (Topconsortia for Knowledge and Innovation) and individual companies and researchers working on energy innovation. This report concerns the research on solar PV [Dutch] Er is een kwalitatief onderzoek uitgevoerd naar de resultaten van afgeronde projecten gericht op energie-innovatie, verdeeld over de zeven thema's van de topsector Energie: Energiebesparing in de industrie; Energiebesparing in de gebouwde omgeving; Gas; Bio-energie; Smart grids; Wind op zee; Zon-pv. Daarmee wordt inzicht gegeven in de vervolgactiviteiten en lessen van een aantal afgesloten EOS-projecten (Energie Onderzoek Subsidie) met het oog op het inspireren, verbinden en versterken van de TKI's (Topconsortia voor Kennis en Innovatie) en individuele bedrijven en onderzoekers die werken aan energie-innovatie. Dit rapport betreft het onderzoek naar zon PV.

  17. The mode of interaction between Vitis and Plasmopara viticola Berk. & Curt. Ex de Bary depends on the host species.

    Science.gov (United States)

    Jürges, G; Kassemeyer, H-H; Dürrenberger, M; Düggelin, M; Nick, P

    2009-11-01

    In order to obtain insight into host responses to grapevine downy mildew (Plasmopara viticola), we compared pathogen development on a panel of Vitis species from North America, Asia and Europe. Leaf discs from different host species were inoculated in parallel, and the colonisation of the mesophyll was visualised by aniline blue staining and quantified with respect to infection incidence and mycelial growth. In parallel, the morphology of guard cells was screened for the presence of an internal cuticular rim after staining with acridine orange and using low-temperature scanning electron microscopy. We observed three response patterns: (i) inhibition of pathogen development early after attachment of zoospores; (ii) successful colonisation of the mesophyll by the pathogen; and (iii) aberrant development, where the pathogen does not attach to guard cells, but produces hyphae on the leaf surface without formation of viable sporangiophores. Inhibition is observed in the North American and Siberian species, successful colonisation prevails in the European hosts, and surface hyphae are found on non-Siberian Asiatic species. We propose that the interaction between host and pathogen is under control of specific signals that have been subject to evolutionary diversification. PMID:19796366

  18. Photovoltaics for Buildings Cutting-Edge PV

    International Nuclear Information System (INIS)

    Photovoltaic (PV) technology development for building-integrated applications (commonly called PV for Buildings) is one of the fastest growing areas in the PV industry. Buildings represent a huge potential market for photovoltaics because they consume approximately two-thirds of the electricity consumed in the US. The PV and buildings industries are beginning to work together to address issues including building codes and standards, integration, after-market servicing, education, and building energy efficiency. One of the most notable programs to encourage development of new PV-for-buildings products is the PV:BONUS program, supported by the US Department of Energy. Demand for these products from building designers has escalated since the program was initiated in 1993. This paper presents a range of PV-for-buildings issues and products that are currently influencing today's PV and buildings markets

  19. Developments in photovoltaic solar energy (PV)

    International Nuclear Information System (INIS)

    The current state of affairs and expected developments concerning photovoltaic solar energy (PV) are described in this report. PV is considered to be one of the most important renewable energy sources for the coming century. PV technology is relatively mature, but commercial development is still at an early stage, largely due to the high cost of electricity from PV. Various initiatives to quickly and substantially reduce costs by increasing the scale of production and stimulating the market are being developed

  20. PV supply chain growing pains

    International Nuclear Information System (INIS)

    This article discussed issues involving the supply chain for photovoltaic (PV) equipment that is emerging in Ontario as a result of the Feed-in-Tariff (FIT) program that was launched in late 2009. The rapidly developing PV supply chain may not be taking a sustainable path. The domestic-content requirement is making manufacturers outlay capital to set up manufacturing in Ontario without reliable market data. Only a small number of dealer/installers have any meaningful experience designing and installing grid-tie PV. Until recently, wholesale distributors designed and supplied most grid-tie PV systems in Canada, and solar dealers/installers or electricians or electrical contractors did the installation. Instead of selling directly to dealer/installers, solar manufacturers should develop strong relationships with wholesalers, who have system design experience and product training. This would allow manufacturers to focus on their core strength, reach more customers, and keep lower inventory levels. Wholesale distributors in turn provide dealer/installers with expertise in product and system design, training from a range of manufacturers, marketing and logistics support, and immediate access to inventory. Manufacturers generally lack appropriate accounting, engineering, marketing, and logistics services to deal with a multitude of active accounts, and they are not structured to work with architects and engineers to do complete system design. Partnering with wholesale distributors allows manufacturers to take on the residential and small-scale commercial sectors by building brand awareness and increasing market share and sales across Canada. 2 figs.

  1. Pyranose Dehydrogenase from Agaricus campestris and Agaricus xanthoderma: Characterization and Applications in Carbohydrate Conversions.

    Science.gov (United States)

    Staudigl, Petra; Krondorfer, Iris; Haltrich, Dietmar; Peterbauer, Clemens K

    2013-01-01

    Pyranose dehydrogenase (PDH) is a flavin-dependent sugar oxidoreductase that is limited to a rather small group of litter-degrading basidiomycetes. The enzyme is unable to utilize oxygen as an electron acceptor, using substituted benzoquinones and (organo) metal ions instead. PDH displays a broad substrate specificity and intriguing variations in regioselectivity, depending on substrate, enzyme source and reaction conditions. In contrast to the related enzyme pyranose 2-oxidase (POx), PDHs from several sources are capable of oxidizing α- or β-1→4-linked di- and oligosaccharides, including lactose. PDH from A. xanthoderma is able to perform C-1 and C-2 oxidation, producing, in addition to lactobionic acid, 2-dehydrolactose, an intermediate for the production of lactulose, whereas PDH from A. campestris oxidizes lactose nearly exclusively at the C-1 position. In this work, we present the isolation of PDH-encoding genes from A. campestris (Ac) and A. xanthoderma (Ax) and a comparison of other so far isolated PDH-sequences. Secretory overexpression of both enzymes in Pichia pastoris was successful when using their native signal sequences with yields of 371 U·L-1 for AxPDH and 35 U·L-1 for AcPDH. The pure enzymes were characterized biochemically and tested for applications in carbohydrate conversion reactions of industrial relevance. PMID:24970179

  2. Pyranose Dehydrogenase from Agaricus campestris and Agaricus xanthoderma: Characterization and Applications in Carbohydrate Conversions

    Directory of Open Access Journals (Sweden)

    Clemens K. Peterbauer

    2013-08-01

    Full Text Available Pyranose dehydrogenase (PDH is a flavin-dependent sugar oxidoreductase that is limited to a rather small group of litter-degrading basidiomycetes. The enzyme is unable to utilize oxygen as an electron acceptor, using substituted benzoquinones and (organo metal ions instead. PDH displays a broad substrate specificity and intriguing variations in regioselectivity, depending on substrate, enzyme source and reaction conditions. In contrast to the related enzyme pyranose 2-oxidase (POx, PDHs from several sources are capable of oxidizing α- or β-1→4-linked di- and oligosaccharides, including lactose. PDH from A. xanthoderma is able to perform C-1 and C-2 oxidation, producing, in addition to lactobionic acid, 2-dehydrolactose, an intermediate for the production of lactulose, whereas PDH from A. campestris oxidizes lactose nearly exclusively at the C-1 position. In this work, we present the isolation of PDH-encoding genes from A. campestris (Ac and A. xanthoderma (Ax and a comparison of other so far isolated PDH-sequences. Secretory overexpression of both enzymes in Pichia pastoris was successful when using their native signal sequences with yields of 371 U·L−1 for AxPDH and 35 U·L−1 for AcPDH. The pure enzymes were characterized biochemically and tested for applications in carbohydrate conversion reactions of industrial relevance.

  3. Production of xanthan gum by free and immobilized cells of Xanthomonas campestris and Xanthomonas pelargonii.

    Science.gov (United States)

    Niknezhad, Seyyed Vahid; Asadollahi, Mohammad Ali; Zamani, Akram; Biria, Davoud

    2016-01-01

    Production of xanthan gum using immobilized cells of Xanthomonas campestris and Xanthomonas pelargonii grown on glucose or hydrolyzed starch as carbon sources was investigated. Calcium alginate (CA) and calcium alginate-polyvinyl alcohol-boric acid (CA-PVA) beads were used for the immobilization of cells. Xanthan titers of 8.2 and 9.2g/L were obtained for X. campestris cells immobilized in CA-PVA beads using glucose and hydrolyzed starch, respectively, whereas those for X. pelargonii were 8 and 7.9 g/L, respectively. Immobilized cells in CA-PVA beads were successfully employed in three consecutive cycles for xanthan production without any noticeable degradation of the beads whereas the CA beads were broken after the first cycle. The results of this study suggested that immobilized cells are advantageous over the free cells for xanthan production. Also it was shown that the cells immobilized in CA-PVA beads are more efficient than cells immobilized in CA beads for xanthan production. PMID:26526173

  4. NCBI nr-aa BLAST: CBRC-DNOV-01-0760 [SEVENS

    Lifescience Database Archive (English)

    Full Text Available CBRC-DNOV-01-0760 ref|NP_636242.1| extracellular protease [Xanthomonas campestris p...v. campestris str. ATCC 33913] ref|YP_244443.1| extracellular protease [Xanthomonas campestris pv. campestri...s str. 8004] sp|P23314|EXPR_XANCP Extracellular protease precursor emb|CAA35962.1| protease [Xanthomonas cam...pestris] gb|AAM40166.1| extracellular protease [Xanthomonas campestris pv. campes...tris str. ATCC 33913] gb|AAY50423.1| extracellular protease [Xanthomonas campestris pv. campestris str. 8004] NP_636242.1 5.2 27% ...

  5. NCBI nr-aa BLAST: CBRC-DNOV-01-3199 [SEVENS

    Lifescience Database Archive (English)

    Full Text Available CBRC-DNOV-01-3199 ref|NP_636242.1| extracellular protease [Xanthomonas campestris p...v. campestris str. ATCC 33913] ref|YP_244443.1| extracellular protease [Xanthomonas campestris pv. campestri...s str. 8004] sp|P23314|EXPR_XANCP Extracellular protease precursor emb|CAA35962.1| protease [Xanthomonas cam...pestris] gb|AAM40166.1| extracellular protease [Xanthomonas campestris pv. campes...tris str. ATCC 33913] gb|AAY50423.1| extracellular protease [Xanthomonas campestris pv. campestris str. 8004] NP_636242.1 0.27 27% ...

  6. NCBI nr-aa BLAST: CBRC-DNOV-01-1204 [SEVENS

    Lifescience Database Archive (English)

    Full Text Available CBRC-DNOV-01-1204 ref|NP_636242.1| extracellular protease [Xanthomonas campestris p...v. campestris str. ATCC 33913] ref|YP_244443.1| extracellular protease [Xanthomonas campestris pv. campestri...s str. 8004] sp|P23314|EXPR_XANCP Extracellular protease precursor emb|CAA35962.1| protease [Xanthomonas cam...pestris] gb|AAM40166.1| extracellular protease [Xanthomonas campestris pv. campes...tris str. ATCC 33913] gb|AAY50423.1| extracellular protease [Xanthomonas campestris pv. campestris str. 8004] NP_636242.1 8.9 27% ...

  7. NCBI nr-aa BLAST: CBRC-DNOV-01-0571 [SEVENS

    Lifescience Database Archive (English)

    Full Text Available CBRC-DNOV-01-0571 ref|NP_636242.1| extracellular protease [Xanthomonas campestris p...v. campestris str. ATCC 33913] ref|YP_244443.1| extracellular protease [Xanthomonas campestris pv. campestri...s str. 8004] sp|P23314|EXPR_XANCP Extracellular protease precursor emb|CAA35962.1| protease [Xanthomonas cam...pestris] gb|AAM40166.1| extracellular protease [Xanthomonas campestris pv. campes...tris str. ATCC 33913] gb|AAY50423.1| extracellular protease [Xanthomonas campestris pv. campestris str. 8004] NP_636242.1 6.8 27% ...

  8. NCBI nr-aa BLAST: CBRC-DNOV-01-2628 [SEVENS

    Lifescience Database Archive (English)

    Full Text Available CBRC-DNOV-01-2628 ref|NP_636242.1| extracellular protease [Xanthomonas campestris p...v. campestris str. ATCC 33913] ref|YP_244443.1| extracellular protease [Xanthomonas campestris pv. campestri...s str. 8004] sp|P23314|EXPR_XANCP Extracellular protease precursor emb|CAA35962.1| protease [Xanthomonas cam...pestris] gb|AAM40166.1| extracellular protease [Xanthomonas campestris pv. campes...tris str. ATCC 33913] gb|AAY50423.1| extracellular protease [Xanthomonas campestris pv. campestris str. 8004] NP_636242.1 4.0 28% ...

  9. NCBI nr-aa BLAST: CBRC-DNOV-01-0949 [SEVENS

    Lifescience Database Archive (English)

    Full Text Available CBRC-DNOV-01-0949 ref|NP_636242.1| extracellular protease [Xanthomonas campestris p...v. campestris str. ATCC 33913] ref|YP_244443.1| extracellular protease [Xanthomonas campestris pv. campestri...s str. 8004] sp|P23314|EXPR_XANCP Extracellular protease precursor emb|CAA35962.1| protease [Xanthomonas cam...pestris] gb|AAM40166.1| extracellular protease [Xanthomonas campestris pv. campes...tris str. ATCC 33913] gb|AAY50423.1| extracellular protease [Xanthomonas campestris pv. campestris str. 8004] NP_636242.1 3.1 29% ...

  10. NCBI nr-aa BLAST: CBRC-DNOV-01-2319 [SEVENS

    Lifescience Database Archive (English)

    Full Text Available CBRC-DNOV-01-2319 ref|NP_636242.1| extracellular protease [Xanthomonas campestris p...v. campestris str. ATCC 33913] ref|YP_244443.1| extracellular protease [Xanthomonas campestris pv. campestri...s str. 8004] sp|P23314|EXPR_XANCP Extracellular protease precursor emb|CAA35962.1| protease [Xanthomonas cam...pestris] gb|AAM40166.1| extracellular protease [Xanthomonas campestris pv. campes...tris str. ATCC 33913] gb|AAY50423.1| extracellular protease [Xanthomonas campestris pv. campestris str. 8004] NP_636242.1 1.4 30% ...

  11. Acute and sub-acute toxicity studies of aqueous and methanol extracts of Nelsonia campestris in rats

    Institute of Scientific and Technical Information of China (English)

    Janet Mobolaji Olaniyan; Hadiza Lami Muhammad; Hussaini Anthony Makun; Musa Bola Busari; Abubakar Siddique Abdullah

    2016-01-01

    Objective: To evaluate the acute and sub-acute toxicity of aqueous and methanol ex-tracts of Nelsonia campestris (N. campestris) in rats. Methods: Acute oral toxicity study of aqueous and methanol extracts was carried out by administration of 10, 100, 1 000, 1 600, 2 900 and 5 000 mg/kg body weight of N. campestris extracts to rats in the respective groups. Sub-acute toxicity study was conducted by oral administration of the extracts at daily doses of 100, 300 and 600 mg/kg body weight to another group of rats for 28 days, while rats in the control group received 0.5 mL of normal saline. Results: The LD50 of the N. campestris extracts in rats was determined to be greater than 5 000 mg/kg body weight. There was no significant difference (P>0.05) between the test groups administered with aqueous and methanol extracts in relation to the control group for serum electrolytes (Na+, K+, Cl−, HCO3−), serum albumin, total and conjugated bili-rubin. Similarly, mean organ-to-body weight ratio and all haematological parameters (white blood cell, red blood cell, mean cell volume, mean corpuscular haemoglobin, mean corpuscular haemoglobin concentration, packed cell volume) evaluated were not significantly different (P > 0.05) from the control. There was a significant increase (P Conclusions: Intake of high doses of this plant extracts may exhibit mild organ toxicity.

  12. The sulfated laminarin triggers a stress transcriptome before priming the SA- and ROS-dependent defenses during grapevine's induced resistance against Plasmopara viticola.

    Directory of Open Access Journals (Sweden)

    Adrien Gauthier

    Full Text Available Grapevine (Vitis vinifera is susceptible to many pathogens which cause significant losses to viticulture worldwide. Chemical control is available, but agro-ecological concerns have raised interest in alternative methods, especially in triggering plant immunity by elicitor treatments. The β-glucan laminarin (Lam and its sulfated derivative (PS3 have been previously demonstrated to induce resistance in grapevine against downy mildew (Plasmopara viticola. However, if Lam elicits classical grapevine defenses such as oxidative burst, pathogenesis-related (PR-proteins and phytoalexin production, PS3 triggered grapevine resistance via a poorly understood priming phenomenon. The aim of this study was to identify the molecular mechanisms of the PS3-induced resistance. For this purpose we studied i the signaling events and transcriptome reprogramming triggered by PS3 treatment on uninfected grapevine, ii grapevine immune responses primed by PS3 during P. viticola infection. Our results showed that i PS3 was unable to elicit reactive oxygen species (ROS production, cytosolic Ca(2+ concentration variations, mitogen-activated protein kinase (MAPK activation but triggered a long lasting plasma membrane depolarization in grapevine cells, ii PS3 and Lam shared a common stress-responsive transcriptome profile that partly overlapped the salicylate- (SA and jasmonate-(JA-dependent ones. After P. viticola inoculation, PS3 specifically primed the SA- and ROS-dependent defense pathways leading to grapevine induced resistance against this biotroph. Interestingly pharmacological approaches suggested that the plasma membrane depolarization and the downstream ROS production are key events of the PS3-induced resistance.

  13. The sulfated laminarin triggers a stress transcriptome before priming the SA- and ROS-dependent defenses during grapevine's induced resistance against Plasmopara viticola.

    Science.gov (United States)

    Gauthier, Adrien; Trouvelot, Sophie; Kelloniemi, Jani; Frettinger, Patrick; Wendehenne, David; Daire, Xavier; Joubert, Jean-Marie; Ferrarini, Alberto; Delledonne, Massimo; Flors, Victor; Poinssot, Benoit

    2014-01-01

    Grapevine (Vitis vinifera) is susceptible to many pathogens which cause significant losses to viticulture worldwide. Chemical control is available, but agro-ecological concerns have raised interest in alternative methods, especially in triggering plant immunity by elicitor treatments. The β-glucan laminarin (Lam) and its sulfated derivative (PS3) have been previously demonstrated to induce resistance in grapevine against downy mildew (Plasmopara viticola). However, if Lam elicits classical grapevine defenses such as oxidative burst, pathogenesis-related (PR)-proteins and phytoalexin production, PS3 triggered grapevine resistance via a poorly understood priming phenomenon. The aim of this study was to identify the molecular mechanisms of the PS3-induced resistance. For this purpose we studied i) the signaling events and transcriptome reprogramming triggered by PS3 treatment on uninfected grapevine, ii) grapevine immune responses primed by PS3 during P. viticola infection. Our results showed that i) PS3 was unable to elicit reactive oxygen species (ROS) production, cytosolic Ca(2+) concentration variations, mitogen-activated protein kinase (MAPK) activation but triggered a long lasting plasma membrane depolarization in grapevine cells, ii) PS3 and Lam shared a common stress-responsive transcriptome profile that partly overlapped the salicylate- (SA) and jasmonate-(JA)-dependent ones. After P. viticola inoculation, PS3 specifically primed the SA- and ROS-dependent defense pathways leading to grapevine induced resistance against this biotroph. Interestingly pharmacological approaches suggested that the plasma membrane depolarization and the downstream ROS production are key events of the PS3-induced resistance. PMID:24516597

  14. Climatic risk of grape downy mildew (Plasmopara viticola for the State of São Paulo, Brazil Risco climático do míldio da videira (Plasmopara viticola no estado de São Paulo

    Directory of Open Access Journals (Sweden)

    Emília Hamada

    2008-12-01

    Full Text Available Viticulture in Brazil has been growing in importance in recent years. In the State of São Paulo, a significant percentage of the production is basically destined to in natura consumption and, more recently, much effort has been made by institutions to revitalize the viticulture in the State. Among fungal diseases, the downy mildew (Plasmopara viticola is one of the main diseases affecting this crop in Brazil, with extreme damage effects on its production. The objective of this study was to estimate the incidence of the downy mildew on grape under the climatic conditions of the State of São Paulo, based on a mathematical model and using Geographical Information System - GIS tools. The study considered the months from September to April, a period in which the downy mildew can affect grapevines under development. Mean temperature and relative humidity were the basic weather data entered in the GIS database. Leaf wetness duration was estimated from relative humidity measurements. Climatic data entered in the GIS were used to calculate and produce maps depicting the severity of the grape downy mildew, through the application of a disease model. Three cities were evaluated (Jales, Jundiaí, and São Miguel Arcanjo, since they represent the main vineyard centers in the State. The adopted methodology permitted quantifying the severity of the grape downy mildew not only in spatial terms, identifying the variability among the different regions of the State, but also in temporal terms, along the months, making an adequate distinction of the studied cities.A viticultura brasileira tem apresentado importância crescente nos últimos anos. Em São Paulo, a expressiva produção é destinada basicamente ao consumo in natura e, mais recentemente, podem ser observados esforços de diversas instituições no sentido de revitalizar a viticultura no estado. O míldio (Plasmopara viticola é uma das principais doenças da cultura no Brasil, com efeitos

  15. Impact de Plasmopaca viticola sur le métabolisme de l'amidon et le fonctionnement stomatique chez la vigne

    OpenAIRE

    Gamm, Magdalena

    2011-01-01

    Le mildiou est une maladie de la vigne affectant les feuilles et les baies et pouvant entraîner des diminutions importantes de la quantité et de la qualité de la vendange. L'agent responsable, Plasmopara viticola, un oomycète biotrophe obligatoire, provoque différentes altérations physiologiques au niveau de la feuille infectée. D'une part, il y a des accumulations anormales d'amidon au niveau des taches d'huile, symptômes caractéristiques de la maladie. D'autre part, l'infection induit une d...

  16. Grid Integrated Distributed PV (GridPV) Version 2.

    Energy Technology Data Exchange (ETDEWEB)

    Reno, Matthew J.; Coogan, Kyle

    2014-12-01

    This manual provides the documentation of the MATLAB toolbox of functions for using OpenDSS to simulate the impact of solar energy on the distribution system. The majority of the functio ns are useful for interfacing OpenDSS and MATLAB, and they are of generic use for commanding OpenDSS from MATLAB and retrieving information from simulations. A set of functions is also included for modeling PV plant output and setting up the PV plant in th e OpenDSS simulation. The toolbox contains functions for modeling the OpenDSS distribution feeder on satellite images with GPS coordinates. Finally, example simulations functions are included to show potential uses of the toolbox functions. Each function i n the toolbox is documented with the function use syntax, full description, function input list, function output list, example use, and example output.

  17. Lightweight IMM PV Flexible Blanket Assembly

    Science.gov (United States)

    Spence, Brian

    2015-01-01

    Deployable Space Systems (DSS) has developed an inverted metamorphic multijunction (IMM) photovoltaic (PV) integrated modular blanket assembly (IMBA) that can be rolled or z-folded. This IMM PV IMBA technology enables a revolutionary flexible PV blanket assembly that provides high specific power, exceptional stowed packaging efficiency, and high-voltage operation capability. DSS's technology also accommodates standard third-generation triple junction (ZTJ) PV device technologies to provide significantly improved performance over the current state of the art. This SBIR project demonstrated prototype, flight-like IMM PV IMBA panel assemblies specifically developed, designed, and optimized for NASA's high-voltage solar array missions.

  18. The unstoppable rise of photovoltaic solar energy: PV vs. PV

    OpenAIRE

    Luque López, Antonio

    2012-01-01

    Photovoltaic (PV) solar energy has been growing during the last decade an explosive rate. Last year (2011) the solar cell production amounted to more than 37 GW. It is the energy technology most installed nowadays. The power generated by the 37 GW is similar to the one generated by about 7 nuclear units of 1 GW each. The solar industry is already a huge industry dominated by Asian countries led by China. It is not anymore a promise. It is just a reality.

  19. 100 KW pv system design

    International Nuclear Information System (INIS)

    This paper reports the design of a 100kw photovolatic (PV) system for 10,000 ft/sup 2/ roof building. It explain the necessary design steps for medium power PV system specifications of associated accessories for large size building solar electrification. A comparison between various solar technologies and their ancillary anchors is provided to guide the young electric power and renewable energy engineers. It is to prove that hybrid photovolatic thermal (PVT) technology is more efficient than simple photovolatic (PV), photovolatic concentrator (PVC) or stand-alone solar thermal heating systems. We have been using fossil fuels from 1859 to 2009. Oil triggered population growth rate which in turn increased energy demand for iil. A 200 years close loop positive feedback has amplified oil production rate for few thousand barrels to 86-87 billion barrels. Today the world population is burning oil at rate of 1000 barrels/sec. The oil reserves are likely to end by 2050 (worst case) or 2100 (best case). At 1.7% growth rate the current global population might double to 12 billion barrels and electric power demand will increase from current 15 TW to TW. Unfortunately oil reserves would be breathing last and global warning would be at its climax. To cope with upcoming power, water water and energy cataclysms, it is more than essential to go for sustainable and renewable and renewable energy education and lifestyles. I hope this design venture will create interest among power and energy students, engineers and professional engine. (author)

  20. Profiling of resveratrol oligomers, important stress metabolites, accumulating in the leaves of hybrid Vitis vinifera (Merzling × Teroldego) genotypes infected with Plasmopara viticola.

    Science.gov (United States)

    Mattivi, Fulvio; Vrhovsek, Urska; Malacarne, Giulia; Masuero, Domenico; Zulini, Luca; Stefanini, Marco; Moser, Claudio; Velasco, Riccardo; Guella, Graziano

    2011-05-25

    In the Vitaceae, viniferins represent a relatively restricted group of trans-resveratrol oligomers with antifungal properties, thus enabling plants to cope with pathogen attack. The aim of this study was to perform isolation and structural characterization of the whole class of viniferins accumulating in the leaves of hybrid Vitis vinifera (Merzling × Teroldego) genotypes infected with Plasmopara viticola . Infected leaves of resistant plants were collected 6 days after infection, extracted with methanol, and prepurified by flash chromatography using ENV+ and Toyopearl HW 40S resins. Further fractionation using normal-phase preparative chromatography and then reversed-phase preparative chromatography allowed isolation of 14 peaks. The isolated compounds were identified using advanced mass spectrometry techniques and extensive one- and two-dimensional nuclear magnetic resonance measurements, UV, CD, optical properties, and molecular mechanic calculations. The results demonstrated the presence in infected leaves of seven dimers (six stilbenes and one stilbenoid), of which four were new in grapevine (ampelopsin D, quadrangularin A, E-ω-viniferin, and Z-ω-viniferin), four trimers (three stilbenes and one stilbenoid), of which two (Z-miyabenol C and E-cis-miyabenol C) were new in grapevine, three tetramer stilbenoids, all new in grapevine, isohopeaphenol, ampelopsin H, and a vaticanol C-like isomer. The isolation of a dimer deriving from the condensation of (+)-catechin with trans-caffeic acid also indicated that other preformed phenolics are structurally modified in tissues infected with P. viticola. PMID:21510709

  1. Soxhlet-assisted matrix solid phase dispersion to extract flavonoids from rape (Brassica campestris) bee pollen.

    Science.gov (United States)

    Ma, Shuangqin; Tu, Xijuan; Dong, Jiangtao; Long, Peng; Yang, Wenchao; Miao, Xiaoqing; Chen, Wenbin; Wu, Zhenhong

    2015-11-15

    Soxhlet-assisted matrix solid phase dispersion (SA-MSPD) method was developed to extract flavonoids from rape (Brassica campestris) bee pollen. Extraction parameters including the extraction solvent, the extraction time, and the solid support conditions were investigated and optimized. The best extraction yields were obtained using ethanol as the extraction solvent, silica gel as the solid support with 1:2 samples to solid support ratio, and the extraction time of one hour. Comparing with the conventional solvent extraction and Soxhlet method, our results show that SA-MSPD method is a more effective technique with clean-up ability. In the test of six different samples of rape bee pollen, the extracted content of flavonoids was close to 10mg/g. The present work provided a simple and effective method for extracting flavonoids from rape bee pollen, and it could be applied in the studies of other kinds of bee pollen. PMID:26454344

  2. Genetic linkage map of Brassica campestris L.using AFLP and RAPD markers

    Institute of Scientific and Technical Information of China (English)

    卢钢; 陈杭; 等

    2002-01-01

    A genetic linkage map comprised of 131 loci was constructed with an F2 population derived from an inter-subspecific cross between Brassica campestris L.ssp.chinensis cv.aijiaohang” and ssp.rapifera cv.,”'isihai”.The genetic map included 93 RAPD loci,36 AFLP loci and 2 morphological loci organized into 10 main linkage groups(LGs) and 2 small groups,covering 1810.9cM with average distance between adjacent markers being approximately 13.8cM.The map is suitable for identification of molecular markers linked to important agronomic traits.QTL analysis,and even for marker-assisted selection in breeding programs of Chinese cabbage and turnip.

  3. Optimization of medium composition for the production of compounds effective against Xanthomonas campestris by bacillus subtilis

    Directory of Open Access Journals (Sweden)

    Rončević Zorana Z.

    2014-01-01

    Full Text Available The biocontrol agents are a very promising alternative to synthetic pesticides that are presently used to control plant diseases caused by phytopathogenic microorganisms. Members of the Bacillus genera are soil bacteria that produce significant quantities of agriculturally important bioactive compounds. Production of these compounds can be improved by changing the nutritional and environmental conditions. The aim of this study was the optimization of medium composition, using response surface methodology, for the production of compounds effective against Xanthomonas campestris ATCC 13951 by Bacillus subtilis ATCC 6633. To study the production of antimicrobial compounds by selected Bacillus strain, the producing microorganisms were cultivated on nutrient broth. The inhibition zone diameter of 18.0 mm obtained by the diffusion-disc method indicated that the used Bacillus subtilis strain produces compounds with antimicrobial activity against Xanthomonas campestris ATCC 13951. To optimize the composition of the cultivation medium in terms of glycerol, sodium nitrite and phosphates content, experiments were carried out in accordance with Box-Behnken design, and optimization of multiple responses was performed using the concept of desirability function. The developed model predicted that the maximum inhibition zone diameter (26.23 mm against tested phytopathogen is achieved when the initial content of glycerol, sodium nitrite and phosphate were 50.00 g/L, 2.85 g/L and 11.00 g/L, respectively. To minimize the consumption of medium components and costs of effluents processing, additional optimization set was made. The techno-economic analysis of the obtained results has to be done to select optimal medium composition for industrial production of antimicrobial compounds.

  4. Variation suggestive of horizontal gene transfer at a lipopolysaccharide (lps biosynthetic locus in Xanthomonas oryzae pv. oryzae, the bacterial leaf blight pathogen of rice

    Directory of Open Access Journals (Sweden)

    Sonti Ramesh V

    2004-10-01

    Full Text Available Abstract Background In animal pathogenic bacteria, horizontal gene transfer events (HGT have been frequently observed in genomic regions that encode functions involved in biosynthesis of the outer membrane located lipopolysaccharide (LPS. As a result, different strains of the same pathogen can have substantially different lps biosynthetic gene clusters. Since LPS is highly antigenic, the variation at lps loci is attributed to be of advantage in evading the host immune system. Although LPS has been suggested as a potentiator of plant defense responses, interstrain variation at lps biosynthetic gene clusters has not been reported for any plant pathogenic bacterium. Results We report here the complete sequence of a 12.2 kb virulence locus of Xanthomonas oryzae pv. oryzae (Xoo encoding six genes whose products are homologous to functions involved in LPS biosynthesis and transport. All six open reading frames (ORFs have atypical G+C content and altered codon usage, which are the hallmarks of genomic islands that are acquired by horizontal gene transfer. The lps locus is flanked by highly conserved genes, metB and etfA, respectively encoding cystathionine gamma lyase and electron transport flavoprotein. Interestingly, two different sets of lps genes are present at this locus in the plant pathogens, Xanthomonas campestris pv. campestris (Xcc and Xanthomonas axonopodis pv. citri (Xac. The genomic island is present in a number of Xoo strains from India and other Asian countries but is not present in two strains, one from India (BXO8 and another from Nepal (Nepal624 as well as the closely related rice pathogen, Xanthomonas oryzae pv. oryzicola (Xoor. TAIL-PCR analysis indicates that sequences related to Xac are present at the lps locus in both BXO8 and Nepal624. The Xoor strain has a hybrid lps gene cluster, with sequences at the metB and etfA ends, being most closely related to sequences from Xac and the tomato pathogen, Pseudomonas syringae pv. tomato

  5. Photovoltaics: PV takes off the UK

    International Nuclear Information System (INIS)

    Despite historical ups and downs, there is still ambition to bring increasingly efficient photovoltaic (PV) systems to the market. PV for major remote telecommunications systems is now an established part of the market, many mobile phone systems are powered by PV and there is potential for increased use of home solar systems, especially in developing countries. Over the past few years, building-integrated PV (BIPV) has been on the increase. In 1999, global production from PV exceeded 200 MW and the UK installed capacity was greater than 1 MW. BIPV is a fast growing market and its characteristics and advantages are discussed. PV installations at Nottingham University, Greenwich Pavilion, BP Amoco Sunbury, Baglan Bay, BP filling stations, and Sainsbury's are described

  6. A computer program for PV systems analysis

    International Nuclear Information System (INIS)

    A computer program for analyzing solar cells and photovoltaic (PV) system is described. The program, called PVC, was written in visual basic for windows and aimed as a tool for studying individual cell characteristics as well as PV system as a whole. This paper describes the mathematical models used in the program, an overview of the program and its application in analyzing a BP275 PV system. (author)

  7. Data monitoring system for PV solar generators

    International Nuclear Information System (INIS)

    The two 1.5 kWp photovoltaic (PV) solar generators are installed and the new PC data monitoring system is developed by applying EC standards for European Solar Test Installation (ESTI). The schematic system diagram of PV generator is presented. The recording parameters for analytical and global monitoring are discussed. The meteorological data from ESTI sensors, temperature sensor and electrical data from inverter and calibrated shunt are stored via analog digital converters (ADC) on a hard disk of data storage PC. Data Logger and Monitor software for automatic data acquisition, treatment and visual distance control of all output PV data from PV solar generator has been created

  8. Electrical PV array reconfiguration strategy for energy extraction improvement in grid-connected PV systems

    OpenAIRE

    Velasco Quesada, Guillermo; Guinjoan Gispert, Francisco; Piqué López, Robert; Román Lumbreras, Manuel; Alfonso, Conesa

    2009-01-01

    This paper applies a dynamical electrical array reconfiguration (EAR) strategy on the photovoltaic (PV) generator of a grid-connected PV system based on a plant-oriented configuration, in order to improve its energy production when the operating conditions of the solar panels are different. The EAR strategy is carried out by inserting a controllable switching matrix between the PV generator and the central inverter, which allows the electrical reconnection of the available PV modules. A...

  9. Incidence of downy mildew Plasmopara viticola (Berk. et Curtis ex. de Bary Berl. et de Toni in Terceira island, Azores

    Directory of Open Access Journals (Sweden)

    Matej Zorman

    2008-12-01

    Full Text Available Downy mildew is one of the most economically important disease affecting vine production in Terceira island, Azores. By its incidence, frequency and quantity of pathogens, supported with favourable temperate humid climate conditions, this disease is difficult to control in terms of sustainable integrated plant protection policy. The objectives of INTERFRUTA project were to determine the incidence of the disease, to better understand it and to adopt an adequate forecasting model with necessary adjustments to predict the disease appearance and its in-time integrated plant protection control measures. Plasmopara viticola was directly observed in two weeks time periods on seven representative vineyards at different altitudes. Three of the monitored plots were established during study inside one plantation. Incidence was registered as result of visual symptoms in percentage, where 10% of plants in each vineyard were observed. Seasonal evolution of the disease was studied in one of the wine producing area.O Míldio é uma das doenças que mais afecta a vinha, na ilha Terceira, Açores. É uma doença fúngica de difícil controlo, pela sua incidência e frequência de aparecimento. Os objectivos do projecto INTERFRUTA II foram determinar a incidência desta doença para melhorar o conhecimento sobre esta e adoptar e validar um modelo matemático adequado à previsão do aparecimento da doença de modo a permitir a aplicação de medidas de protecção integrada. A evolução do míldio foi acompanhada em sete parcelas de vinha, da área vitivinícola dos Biscoitos, através da observação visual de folhas. Numa das parcelas, três dos talhões não foram tratados para servirem de controlo. Em cada parcela foram observadas 10% das plantas, tendo sido registada a percentagem de plantas com sintomas visuais da presença de míldio.

  10. The Effect of Field Dodder (Cuscuta campestris Yunck. on Morphological and Fluorescence Parameters of Giant Ragweed (Ambrosia trifida L.

    Directory of Open Access Journals (Sweden)

    Sava Vrbničanin

    2013-01-01

    Full Text Available The effect of the parasitic flowering plant known as field dodder (Cuscuta campestrisYunck. on morphological and fluorescence parameters of infested giant ragweed(Ambrosia trifida L. plants was examined under controlled conditions. The parameters ofchlorophyll fluorescence (Fo, Fv/Fm, ΦPSII, Fv, Fm, ETR and IF were measured on infested (Iand non-infested (N A. trifida plants over a period of seven days, beginning with the day ofinfestation. Morphological parameters (plant height, dry and fresh weight were measuredon the last day of fluorescence measurements. C. campestris was found to affect the height,fresh and dry weight of the infested A. trifida plants, causing significant reduction in plantheight and dry weight. Field dodder also affected several parameters of chlorophyll fluorescence(Fo, Fv/Fm, ΦPSII and Fv in infested A. trifida plants.

  11. Overcoming interspecific incompatibility in the cross Brassica campestris ssp. japonica x Brassica oleracea var. botrytis using irradiated mentor pollen page

    International Nuclear Information System (INIS)

    The cross B. campestris ssp. japonica x B. oleracea var. botrytis fails due to incompatibility barrier at the stigma. To realize this cross, irradiated compatible pollen (mentor pollen) was used before the incompatible pollination. The presence of mentor pollen stimulated the incompatible pollen to germinate and effect fertilization and seed set. One hybrid was thus obtained. Most of the seeds were inviable. Of the 5 plants raised one was a hybrid and 4 resembled the female parent. 1 tab., 7 refs

  12. Evaluation of In Vitro Anticancer Activity of Ocimum Basilicum, Alhagi Maurorum, Calendula Officinalis and Their Parasite Cuscuta Campestris

    OpenAIRE

    Mandana Behbahani

    2014-01-01

    The present investigation was carried out to study the relationship between presence of cytotoxic compounds in Ocimum basilicum, Alhagi maurorum, Calendula officinalis and their parasite Cuscuta campestris. The cytotoxic activity of the pure compounds was performed by MTT assay against breast cancer cell lines (MCF-7 and MDA-MB-231) and normal breast cell line (MCF 10A). The induction of apoptosis was measured by the expression levels of p53, bcl-2, bax and caspase-3 genes using quantitative ...

  13. INFLUENCE OF EPIDEMIOLOGICAL FACTORS ON THE BIOHERBICIDAL EFFICACY OF A Xanthomonas campestris ISOLATE ON COMMON COCKLEBUR ( Xanthium strumarium

    Directory of Open Access Journals (Sweden)

    C. Douglas Boyette

    2013-07-01

    Full Text Available Greenhouse and controlled-environment studies were conducted to determine the effects of incubation temperature, dew period temperature, dew period duration, plant growth stage, and cell concentration on the bioherbicidal efficacy of a highly virulent isolate (LVA987 of the bacterial pathogen,Xanthomonas campestris, against Xanthium strumarium (common cocklebur. X. campestris infected cocklebur at 20, 25, 30, and 35ºC but the disease achieved at 20ºC was not sufficient to cause high plant mortality. Plant mortality was also significantly lower in plants that were exposed to < 12 h of dew, or at dew temperatures of 15 or 35 ºC. Plants at the 0-4 leaf stage were controlled more efficaciously than older plants and increasing cell concentration from 10^5 to 10^9 cells ml^-1 resulted in higher mortality and biomass reduction levels. Results indicate that X. campestris can infect and kill cocklebur over a wide range of temperature, dew period, and inoculum levels and, therefore has potential as a bioherbicidal agent against common cocklebur.

  14. Adiabatic Rearrangement of Hollow PV Towers

    Directory of Open Access Journals (Sweden)

    Eric A Hendricks

    2010-10-01

    Full Text Available Diabatic heating from deep moist convection in the hurricane eyewall produces a towering annular structure of elevated potential vorticity (PV. This structure has been referred to as a hollow PV tower. The sign reversal of the radial gradient of PV satisfies the Charney-Stern necessary condition for combined barotropic-baroclinic instability. For thin enough annular structures, small perturbations grow exponentially, extract energy from the mean flow, and lead to hollow tower breakdown, with significant vortex structural and intensity change. The three-dimensional adiabatic rearrangements of two prototypical hurricane-like hollow PV towers (one thick and one thin are examined in an idealized framework. For both hollow towers, dynamic instability causes air parcels with high PV to be mixed into the eye preferentially at lower levels, where unstable PV wave growth rates are the largest. Little or no mixing is found to occur at upper levels. The mixing at lower and middle levels is most rapid for the breakdown of the thin hollow tower, consistent with previous barotropic results. For both hollow towers, this advective rearrangement of PV affects the tropical cyclone structure and intensity in a number of ways. First, the minimum central pressure and maximum azimuthal mean velocity simultaneously decrease, consistent with previous barotropic results. Secondly, isosurfaces of absolute angular momentum preferentially shift inward at low levels, implying an adiabatic mechanism by which hurricane eyewall tilt can form. Thirdly, a PV bridge, similar to that previously found in full-physics hurricane simulations, develops as a result of mixing at the isentropic levels where unstable PV waves grow most rapidly. Finally, the balanced mass field resulting from the PV rearrangement is warmer in the eye between 900 and 700 hPa. The location of this warming is consistent with observed warm anomalies in the eye, indicating that in certain instances the hurricane

  15. PV GAP: benefits of standards and quality assurance for the PV industry

    International Nuclear Information System (INIS)

    The birth of the Global Approval Programme for Photovoltaics (PV GAP) to address the need for a quality assurance programme for PV components, installations, systems, after sales maintenance, and in electrification projects is reported, and the establishment of a globally accepted approval/certification programme, and the advantages of using the already established internationally accepted International Electrotechnical Commission Quality Assessment System for Electronic Components (IECQ) to administer the PV GAP approval process are discussed. Details are given of the approval process for testing laboratories, the benefits of reciprocity of testing laboratory results, the licensing of the PV quality mark and seal; and the structure of PV GAP

  16. The PV market - Past, present, and future

    International Nuclear Information System (INIS)

    This paper forecasts the photovoltaic (PV) market growth for the 1900's. Ten years of PV history are reviewed and used to establish market trends in terms of average selling price (ASP) and kilowatts shipped by market segment. The market is segmented into indoor consumer, stand-alone, and grid-connected applications. Indoor consumer presently represents a saturated market and is fairly predictable. The stand-alone market (i.e. not connected to the utility grid) is fairly stable and predictable. The utility PV market, however, is highly dependent on a number of market factors such as the cost of conventional energy, the cost of PV systems, utility acceptance of PV, and regulatory controls. Government and institutional regulations, environmental issues, OPEC and Middle East politics will have the greatest impact on the cost of conventional fuels. Private and federal investment in PV technology development could have a significant impact on the cost of PV systems. Forecasts are provided through the year 2000 for indoor consumer, stand-alone, and utility markets. PV has unique attributes which make it a desirable source of energy in specific applications. It is a renewable source of energy, non-polluting, very reliable, predictable, low maintenance, modular, and has a very low operating cost. The energy source (sunlight) is distributed around the globe. Its limitations are high initial cost, no inherent energy storage, and low energy density

  17. Distributed PV Adoption - Sensitivity to Market Factors

    Energy Technology Data Exchange (ETDEWEB)

    Gagnon, Pieter; Sigrin, Ben

    2016-02-01

    NREL staff used the dSolar (distributed solar) model to forecast the adoption of distributed, behind-the-meter PV through the year 2050 for 9 different scenarios. The scenarios varied in their assumptions about a carbon tax, the cost of PV systems in the future, and what credit would be given for excess generation once current net metering policies expire.

  18. Global PV markets and perspectives

    Energy Technology Data Exchange (ETDEWEB)

    Wolfsegger, Cristoph [European Photolvoltaic Industry Association (EPIA), Brussels, Belgium (Belgium)

    2007-06-15

    This presentation mainly talks about the global importance of the PV industry, not only in the environmental sphere but also in the economic sphere. It is firstly given the major information of the European Photovoltaic Industry Association (EPIA), where there can be found the lists of those full member countries that work as: components manufacturers, consulting, and associate members. Then, it is given a briefly explanation about the Alliance for Rural Electrification (ARE), and the reasons why the -PV systems- are almost the panacea to both the energy and the environmental issue. In addition, it is given the most relevant information about how to implement this system in those regions that have not yet implemented it. Besides, there are explained some of the benefits that this system has. It is shortly explained how this system is working in German and it is also shown a comparison chart about the photovoltaic feed-in tariffs. There are shown some graphics and charts having information related to the global markets and the global installations of PV systems and other issues related to them. [Spanish] Esta presentacion habla principalmente acerca de la importancia que hoy en dia tiene la industria fotovoltaica alrededor del mundo, esto no solo ocurre en el ambito ambiental sino tambien en el economico. En la primer parte se muestra la informacion mas importante acerca de la Asociacion Europea de la Industria Fotovoltaica (EPIA por sus siglas en ingles), en donde se encuentran las listas de los paises que son miembros permanentes trabajando como: fabricantes de componentes, asesores y miembros asociados. Enseguida, se da, de manera escueta, una explicacion acerca de la ARE, asi como las razones por las que los sistemas fotovoltaicos son casi la panacea tanto para los problemas ambientales como para los energeticos. Ademas, se explica la informacion mas relevante acerca de como implementar este sistema en aquellas partes del mundo que todavia no lo han realizado

  19. Learning in PV trends and future prospects

    International Nuclear Information System (INIS)

    For large scale application of PV cost reduction is essential. It is shown in this study that the price evolution is on track and even accelerating the last 15 years. Using an experience curve approach a learning rate of little over 20% was found consistent with other studies. As data were collected for small rooftop grid connected systems, it could be shown that this learning rate is not only found for modules, but also for BOS (all costs apart from the modules) in Germany as well as in the Netherlands. Projections of the future price of PV systems show that a learning rate of at least 20% is needed to make introduction of PV affordable. It is very effective to invest in learning, thus increasing the learning rate, as well as developing market segments were the value of PV is higher, such as residential PV systems in southern Europe

  20. Learning in PV trends and future prospects

    International Nuclear Information System (INIS)

    For large scale application of PV cost reduction is essential. It is shown in this study that the price evolution is on track and even accelerating the last 15 years. Using an experience curve approach a learning rate of little over 20% was found consistent with other studies. As data were collected for small roof-top grid connected systems, it could be shown that this learning rate is not only found for modules, but also for BOS in Germany as well as in the Netherlands. Projections of the future price of PV systems show that a learning rate of at least 20% is needed to make introduction of PV affordable. It is very effective to invest in learning, thus increasing the learning rate, as well as developing market segments were the value of PV is higher, such as residential PV systems in southern Europe. (authors)

  1. Power of design - the future of building-integrated PV

    Energy Technology Data Exchange (ETDEWEB)

    Abbate, Cinzia [ENEL, Rome (Italy). Officine di Architettura

    2001-04-01

    This paper discusses strategies to make building integrated photovoltaic (PV) systems more acceptable and to allow PV material to compete with conventional construction material. The history of developments in building integration and difficulties encountered by architects wishing to use PV products are explored, and the Dutch Amersfoot project in Utrecht involving a new suburb of 501 house covered with PV panels is described. Questions raised regarding architectural integration of PV systems, and PV systems and the construction market are discussed. The Italian PV programme, financial and political constraints, and the positioning of PV on existing structures are reported.

  2. Power of design - the future of building-integrated PV

    International Nuclear Information System (INIS)

    This paper discusses strategies to make building integrated photovoltaic (PV) systems more acceptable and to allow PV material to compete with conventional construction material. The history of developments in building integration and difficulties encountered by architects wishing to use PV products are explored, and the Dutch Amersfoot project in Utrecht involving a new suburb of 501 house covered with PV panels is described. Questions raised regarding architectural integration of PV systems, and PV systems and the construction market are discussed. The Italian PV programme, financial and political constraints, and the positioning of PV on existing structures are reported

  3. The transcription factor VvWRKY33 is involved in the regulation of grapevine (Vitis vinifera) defense against the oomycete pathogen Plasmopara viticola.

    Science.gov (United States)

    Merz, Patrick R; Moser, Tina; Höll, Janine; Kortekamp, Andreas; Buchholz, Günther; Zyprian, Eva; Bogs, Jochen

    2015-03-01

    Grapevine (Vitis vinifera ssp. vinifera) is one of the most important fruit species; however, it is highly susceptible to various pathogens, which can cause severe crop losses in viticulture. It has been shown that several WRKY class transcription factors (TFs) are part of the signal transduction cascade, which leads to the activation of plant defense reactions against various pathogens. In the present investigation, a full-length cDNA was isolated from V. vinifera leaf tissue encoding a predicted protein, designated VvWRKY33, which shows the characteristics of group I WRKY protein family. VvWRKY33 induction correlates with the expression of VvPR10.1 (pathogenesis-related 10.1) gene in the leaves of the resistant cultivar 'Regent' after infection with Plasmopara viticola, whereas in the susceptible cultivar 'Lemberger' VvWRKY33 and VvPR10.1 are not induced. Corresponding expression of the TF and VvPR10.1 was even obtained in uninfected ripening berries. In planta, analysis of VvWRKY33 has been performed by ectopic expression of VvWRKY33 in grapevine leaves of greenhouse plants mediated via Agrobacterium tumefaciens transformation. In consequence, VvWRKY33 strongly increases resistance to P. viticola in the susceptible cultivar 'Shiraz' and reduces pathogen sporulation of about 50-70%, indicating a functional role for resistance in grapevine. Complementation of the resistance-deficient Arabidopsis thaliana Columbia-0 (Col-0) mutant line wrky33-1 by constitutive expression of VvWRKY33 restores resistance against Botrytis cinerea to wild-type level and in some complemented mutant lines even exceeds the resistance level of the parental line Col-0. Our results support the involvement of VvWRKY33 in the defense reaction of grapevine against different pathogens. PMID:25132131

  4. Rapid and multiregional adaptation to host partial resistance in a plant pathogenic oomycete: evidence from European populations of Plasmopara viticola, the causal agent of grapevine downy mildew.

    Science.gov (United States)

    Delmotte, François; Mestre, Pere; Schneider, Christophe; Kassemeyer, Hanns-Heinz; Kozma, Pál; Richart-Cervera, Sylvie; Rouxel, Mélanie; Delière, Laurent

    2014-10-01

    Crop pathogens evolve rapidly to adapt to their hosts. The use of crops with quantitative disease resistance is expected to alter selection of pathogen life-history traits. This may result in differential adaptation of the pathogen to host cultivars and, sometimes, to the erosion of quantitative resistance. Here, we assessed the level of host adaptation in an oomycete plant pathogenic species. We analysed the phenotypic and genetic variability of 17 Plasmopara viticola isolates collected on Vitis vinifera and 35 isolates from partially resistant varieties (Regent and genotypes carrying the Rpv1 gene). Cross-inoculation experiments assessed two components of aggressiveness and a life-history trait of the pathogen: disease severity, sporangial production and sporangia size. The results contribute evidence to the emergence of P. viticola aggressive isolates presenting a high level of sporulation on the partially resistant Regent. By contrast, no adaptation to the Rpv1 gene was found in this study. The erosion of Regent resistance may have occurred in less than 5years and at least three times independently in three distant wine-producing areas. Populations from resistant varieties showed a significant increase in sporangia production capacity, indicating an absence of fitness costs for this adaptation. The increase in the number of sporangia was correlated with a reduction in sporangia size, a result which illustrates how partial plant disease resistance can impact selection of the pathogen's life-history traits. This case study on grapevine downy mildew shows how new plant pathogen populations emerge in agro-ecosystems by adapting to partial host resistance. This adaptive pattern highlights the need for wise management of plant partial disease resistance to ensure its sustainability over time. PMID:24184095

  5. Genetic signature of a range expansion and leap-frog event after the recent invasion of Europe by the grapevine downy mildew pathogen Plasmopara viticola.

    Science.gov (United States)

    Fontaine, Michael C; Austerlitz, Fréderic; Giraud, Tatiana; Labbé, Frédéric; Papura, Daciana; Richard-Cervera, Sylvie; Delmotte, François

    2013-05-01

    Biologic invasions can have important ecological, economic and social consequences, particularly when they involve the introduction and spread of plant invasive pathogens, as they can threaten natural ecosystems and jeopardize the production of human food. Examples include the grapevine downy mildew, caused by the oomycete Plasmopara viticola, an invasive species native to North America, introduced into Europe in the 1870s. We investigated the introduction and spread of this invasive pathogen, by analysing its genetic structure and diversity in a large sample from European vineyards. Populations of P. viticola across Europe displayed little genetic diversity, consistent with the occurrence of a bottleneck at the time of introduction. Bayesian coalescent analyses revealed a clear population expansion signal in the genetic data. We detected a weak, but significant, continental-wide population structure, with two geographically and genetically distinct clusters in Western and Eastern European vineyards. Approximate Bayesian computation, analyses of clines of genetic diversity and of isolation-by-distance patterns provided evidence for a wave of colonization moving in an easterly direction across Europe. This is consistent with historical reports, first mentioning the introduction of the disease in Bordeaux vineyards (France) and sub-sequently documenting its rapid spread across Europe. This initial introduction in the west was probably followed by a 'leap-frog' event into Eastern Europe, leading to the formation of the two genetic clusters we detected. This study shows that recent population genetics methods within the Bayesian and coalescence frameworks are extremely powerful for increasing our understanding of pathogen population dynamics and invasion histories. PMID:23506060

  6. Determination of methodology to obtain resistance to citrus canker (Xanthomonas campestris pv. citri) through nuclear techniques combined with in vitro culture

    International Nuclear Information System (INIS)

    One of the serious problems of sweet orange cultivation in Brazil is the occurrence of citrus canker. As a result, it is most important to obtain cultivars that are tolerant or resistant to this bacterial disease. Many citrus cultivars are potentially polyembryonic: a nucellar tissue can produce several embryos genetically identical to the mother plant. Considering that these embryos are of unicellular origin, the application of mutagenic agents to nucellar tissues is an interesting method for obtaining non-chimeric mutants. On the other hand, in vitro techniques have become an important tool in mutation breeding, since the nucellus can be totipotent even after mutagen treatment, and these techniques permit the screening of mutants for disease tolerance or resistance at earlier, even in vitro, stages of growth. Nucellar tissues of young fruits of the cultivar Valencia (Citrus sinensis Osb.) were extracted from ovules 12 weeks after pollination and put on basic medium, consisting of macro- and micronutrients of Murashige and Skoog medium combined with (in mg/L) meso-inositol (100); pyridoxine HCl (1); nicotinic acid (1); thiamine (0.2); saccharose (50 g/L); malt extract (500); bacto-agar (8 g/L). The nucellar tissues were gamma irradiated at various doses to determine their radiosensitivity on inoculation one week, two weeks and three weeks after inoculation. The percentage of nucellar cultures producing embryoids was inversely proportional to the radiation dose. There was no significant difference between the control (60%) and 0.5 kR (55%). The dose of 12 kR was practically lethal. The average number of embryoids per nucellar culture, at doses of 0.5, 1.0 and 2.0 kR, was significantly reduced, as compared with the control (6.4), yielding the almost similar values of 3.4, 3.0 and 4.5, respectively. (author)

  7. Photosynthetic carbon fixation characteristics of fruiting structures of Brassica campestris L

    International Nuclear Information System (INIS)

    Activities of key enzymes of the Calvin cycle and C4 metabolism, rates of CO2 fixation, and the initial products of photosynthetic 14CO2 fixation were determined in the podwall, seed coat (fruiting structures), and the subtending leaf (leaf below a receme) of Brassica campestris L. cv Toria. Compared to activities of ribulose-1,5-bisphosphate carboxylase and other Calvin cycle enzymes, e.g. NADP-glyceraldehyde-3-phosphate-dehydrogenase and ribulose-5-phosphate kinase, the activities of phosphoenol pyruvate carboxylase and other enzymes of C4 metabolism, viz. NADP-malate dehydrogenase, NADP-malic enzyme, glutamate pyruvate transaminase, and glutamate oxaloacetate transaminase, were generally much higher in seed than in podwall and leaf. Podwall and leaf were comparable to each other. Pulse-chase experiments showed that in seed the major product of 14CO2 assimilation was malate (in short time), whereas in podwall and leaf, the label initially appeared in 3-PGA. With time, the label moved to sucrose. In contrast to legumes, Brassica pods were able to fix net CO2 during light. However, respiratory losses were very high during the dark period

  8. Bioconversion from crude glycerin by Xanthomonas campestris 2103: xanthan production and characterization

    Directory of Open Access Journals (Sweden)

    L. V. Brandão

    2013-12-01

    Full Text Available The production and rheological properties of xanthan gum from crude glycerin fermentation, a primary by-product of the biodiesel industry with environmental and health risks, were evaluated. Batch fermentations (28 °C/250 rpm /120 h were carried out using crude glycerin, 0.01% urea and 0.1% KH2PO4, (% w/v, and compared to a sucrose control under the same operational conditions, using Xanthomonas campestris strain 2103 isolate from Brazil. Its maximal production by crude glycerin fermentation was 7.23±0.1 g·L-1 at 120 h, with an apparent viscosity of 642.57 mPa·s, (2 % w/v, 25 °C, 25 s-1, 70% and 30% higher than from sucrose fermentation, respectively. Its molecular weight varied from 28.2 to 36.2×10(6 Da. The Ostwald-de-Waele model parameters (K and n indicated a pseudoplastic behavior at all concentrations (0.5 to 2.0 %, w/v and temperatures (25-85 °C, while its consistency index indicated promising rheological properties for drilling fluid applications. Therefore, crude glycerin has potential as a cost-effective and alternative substrate for non-food grade xanthan production.

  9. Changes in Protein, Nonnutritional Factors, and Antioxidant Capacity during Germination of L. campestris Seeds

    Directory of Open Access Journals (Sweden)

    C. Jiménez Martínez

    2012-01-01

    Full Text Available The changes in SDS-PAGE proteins patterns, oligosaccharides and phenolic compounds of L. campestris seeds, were evaluated during nine germination days. SDS-PAGE pattern showed 12 bands in the original protein seeds, while in the samples after 1–9 germination days, the proteins located in the range of 28–49 and 49–80 kDa indicated an important reduction, and there was an increase in bands about 27 kDa. On the other hand, oligosaccharides showed more than 50% of decrease in its total concentration after 4 germination days; nevertheless after the fifth day, the oligosaccharides concentration increases and rises more than 30% of the original concentration. Phenolic compounds increased their concentration since the first germination day reaching until 450% more than the original seed level. The obtained results are related with liberation or increase of phenolic compounds with antioxidant properties, allowing us to suggest that the germination would be used to produce legume foods for human consumption with better nutraceutical properties.

  10. The market for photovoltaic (PV) technology

    International Nuclear Information System (INIS)

    This paper describes a study that was intended to provide the Electric Power Research Institute (EPRI) with a market analysis for photovoltaic (PV) technologies under development by EPRI and others. The analysis was to focus on markets and factors leading to significant incremental growth for PV demand, large enough to support more efficient scale PV manufacturing capacity. EPRI anticipates that PV ultimately could provide grid-connected power, however, the 1995--2010 market dynamics are uncertain. The specific objectives of this study, therefore, were to: determine what major future domestic US markets for PV technologies will emerge and provide enough volume to support significant improvements in manufacturing costs through manufacturing economies of scale; provide insight on what is needed to gain acceptance of PV technologies for electric power generation in those major markets; provide insight on when investments in demonstration and manufacturing facilities should be made and what is needed to be successful in each element of the business that these markets could support (e.g., technology development, manufacturing, sales, installation, and service); and provide key insights on the requirements for commercial success of PV in the utility sector

  11. Multifunctional a-Si PV systems

    Energy Technology Data Exchange (ETDEWEB)

    Peippo, K.; Lund, P.; Vartiainen, E. [Helsinki Univ. of Technology, Otaniemi (Finland). Advanced Energy Systems

    1998-10-01

    The optimal use of the various forms of solar energy (passive, active, daylighting, photovoltaics) in buildings calls for an optimal integration of the technologies. As energy conservation potential in space heating may soon be exhausted, electricity efficiency and on-site generation will play an increasing role in energy-conscious building design. There, dispersed PV systems integrated into buildings show a significant market potential, due to a number of benefits: no extra land area is required, PV-array may replace conventional cladding materials and become a building element. Moreover, the produced PV-electricity is more valuable for the building owner than for an electric utility

  12. Optimal design of PV and HP system

    DEFF Research Database (Denmark)

    Nepper-Rasmussen, Bjarke Christian; Rasmussen, Theis Bo

    2015-01-01

    Methods of utilizing residential produced photovoltaic (PV) power by converting to thermal energy through heat pumps (HP) are present in literature, where thermal energy is dispersed as either heat or hot water at the instant moment of PV production. In this paper an alternative solution is...... described, where the thermal energy is stored in a buffer tank (BT) capable of dispersing heat to either the heating system of a house or a hot water tank, for later use. The thermal storage solution including a BT can increase the self-consumption of residentially produced PV power and thereby shift...

  13. PV-hybrid and mini-grid

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    Within the 5th European PV-hybrid and mini-grid conference 29th and 30th April, 2010 in Tarragona (Spain) the following lectures were held: (1) Overview of IEA PVPS Task 11 PV-hybrid systems within mini grids; (2) Photovoltaic revolution for deployment in developing countries; (3) Legal and financial conditions for the sustainable operation of mini-grids; (4) EU instruments to promote renewable energies in developing countries; (5) PV hybridization of diesel electricity generators: Conditions of profitability and examples in differential power and storage size ranges; (6) Education suit of designing PV hybrid systems; (7) Sustainable renewable energy projects for intelligent rural electrification in Laos, Cambodia and Vietnam; (8) Techno-economic feasibility of energy supply of remote villages in Palestine by PV systems, diesel generators and electric grid (Case studies: Emnazeil and Atouf villages); (9) Technical, economical and sustainability considerations of a solar PV mini grid as a tool for rural electrification in Uganda; (10) Can we rate inverters for rural electrification on the basis of energy efficiency?; (11) Test procedures for MPPT charge controllers characterization; (12) Energy storage for mini-grid stabilization; (13) Redox flow batteries - Already an alternative storage solution for hybrid PV mini-grids?; (14) Control methods for PV hybrid mini-grids; (15) Partial AC-coupling in mini-grids; (15) Normative issues of small wind turbines in PV hybrid systems; (16) Communication solutions for PV hybrid systems; (17) Towards flexible control and communication of mini-grids; (18) PV/methanol fuel cell hybrid system for powering a highway security variable message board; (19) Polygeneration smartgrids: A solution for the supply of electricity, potable water and hydrogen as fuel for transportation in remote Areas; (20) Implementation of the Bronsbergen micro grid using FACDS; (21) A revisited approach for the design of PV wind hybrid systems; (22

  14. PV: Bonus--Developing a U.S. market of PV in buildings

    International Nuclear Information System (INIS)

    The use of photovoltaic (PV) systems in and on buildings is seen as a key market for the PV industry. The buildings market is challenging, but it provides a large potential for increased US production of ''high-value'' PV technology that will benefit electric utilities and building owners. To assist the PV industry in developing products for this market, the US Department of Energy began a new initiative called ''Building Opportunities in the US for Photovoltaics'' (PV:BONUS). The responses cover nearly all of the PV-buildings product options envisioned, with multiple responses on topics such as architectural glazings and roofing systems. The paper describes the types of products that will be pursued by the teams selected. Additional supporting activities are described that will further encourage the development of a sustainable infrastructure

  15. Possibility of recycling silicon PV modules

    International Nuclear Information System (INIS)

    A method of economically recovering silicon wafers from x-Si PV modules is presented. Since the wafer cost is estimated at about half the total material cost of a silicon PV module, there may be economic benefits from recycling. In addition, recycling silicon PV modules allows reclamation of the glass substrate and prevents disposal of potentially hazardous materials such as silver and lead from the wafer contact and interconnect systems. The major problem for recycling silicon Wafers from end-of-life devices has been cleanly separating the wafers from the EVA polymer encapsulating material. This paper describes the cost effective recycling of functioning x-Si PV cells after thermal decomposition of EVA in an inert gas atmosphere. Process costs are estimated at US $0.20 /per 10 cm x 10 cm recovered cell

  16. Leakage current measurement in transformerless PV inverters

    DEFF Research Database (Denmark)

    Kerekes, Tamas; Sera, Dezso; Mathe, Laszlo

    2012-01-01

    Photovoltaic (PV) installations have seen a huge increase during the last couple of years. Transformerless PV inverters are gaining more share of the total inverter market, due to their high conversion efficiency, small weight and size. Nevertheless safety should have an important role in case of...... these tranformerless systems, due to the missing galvanic isolation. Leakage and fault current measurement is a key issue for these inverter topologies to be able to comply with the required safety standards. This article presents the test results of two different current measurement sensors that were...... suggested to be used in commercial PV inverters for the measurement of leakage and fault ground currents. The German VDE0126–1–1 standard gives the limit for fault and leakage ground currents and all grid connected PV inverters have to comply with these limits and disconnect from the grid in case of a fault....

  17. Distributed PV Adoption in Maine Through 2021

    Energy Technology Data Exchange (ETDEWEB)

    Gagnon, Pieter; Sigrin, Ben

    2015-11-06

    NREL has used its dSolar (distributed solar) model to generate low-medium-high estimates of distributed PV adoption in Maine through 2021. This presentation gives a high-level overview of the model and modeling results.

  18. PV Module Reliability Research (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2013-06-01

    This National Center for Photovoltaics sheet describes the capabilities of its PV module reliability research. The scope and core competencies and capabilities are discussed and recent publications are listed.

  19. The potential of solar PV in Ontario

    International Nuclear Information System (INIS)

    Canada has lagged behind other industrialized nations in the growth of solar energy markets. Currently, over 78 per cent of the global market for solar energy is for grid-connected applications where power is fed into the electrical distribution network. Less than 3.5 per cent of the Canadian solar market is grid-connected. This report investigated the potential size of the photovoltaic (PV) market in Ontario given adequate support from both governments and utilities. The forecast was based on sustainable growth levels that the solar industry as a whole might maintain over an extended period of time. It was suggested that it is technically feasible to install over 3000 MW of PV in single, detached homes in the province, which could generate over 3200 GWh each year. If the right policy conditions were put in place, the technical potential for PV on all buildings in Ontario is over 14,000 MW by 2025, which would generate over 13,000 GWh annually. Support mechanisms such as the Advanced Renewable Tariff (ART) or Standard Offer Contracts (SOC) will enable the PV industry to build capacity. Future markets for PV include new homes, commercial buildings and the existing housing stock. With a properly designed system, it is forecasted that the deployment of PV by 2025 could result in the involvement of 400,000 homes with over 1200 MW of installed capacity and over 290 MW installed annually by 2025. Recommendations to Ontario Power Authority's (OPA) report supply mix report focused on the use of SOCs as the appropriate support mechanism to start building solar capacity in Ontario, as projections using SOCs would see Ontario following the growth patterns of other nations. It was concluded that the OPA report does not acknowledge the current growth rates of PV globally, nor does it fully consider the potential of PV in Ontario. 9 refs., 8 figs

  20. PV array simulator development and validation

    International Nuclear Information System (INIS)

    The ability to harvest all available energy from a photovoltaic (PV) array is essential if new system developments are to meet levelized cost of energy targets and achieve grid parity with conventional centralized utility power. Therefore, exercising maximum power point tracking (MPPT) algorithms, dynamic irradiance condition operation and startup and shutdown routines and evaluating inverter performance with various PV module fill-factor characteristics must be performed with a repeatable, reliable PV source. Sandia National Laboratories is collaborating with Ametek Programmable Power to develop and demonstrate a multi-port TerraSAS PV array simulator. The simulator will replicate challenging PV module profiles, enabling the evaluation of inverter performance through analyses of the parameters listed above. Energy harvest algorithms have traditionally implemented methods that successfully utilize available energy. However, the quantification of energy capture has always been difficult to conduct, specifically when characterizing the inverter performance under non-reproducible dynamic irradiance conditions. Theoretical models of the MPPT algorithms can simulate capture effectiveness, but full validation requires a DC source with representative field effects. The DC source being developed by Ametek and validated by Sandia is a fully integrated system that can simulate an IV curve from the Solar Advisor Model (SAM) module data base. The PV simulator allows the user to change the fill factor by programming the maximum power point voltage and current parameters and the open circuit voltage and short circuit current. The integrated PV simulator can incorporate captured irradiance and module temperature data files for playback, and scripted profiles can be generated to validate new emerging hardware embedded with existing and evolving MPPT algorithms. Since the simulator has multiple independent outputs, it also has the flexibility to evaluate an inverter with multiple

  1. Building PV markets: customers and prices

    International Nuclear Information System (INIS)

    What makes market deployment strategies for PV successful? A group of specialists (from IEA Task 7) has been looking at the progress made so far. Here, in the first of two articles based on their report, the author presents some of their findings, including benefits and barriers for defined groups of customers; how customers for PV systems are identified, and what they are willing to pay. It also looks at current prices in different countries, and their possible trends. (Author)

  2. Addressing firefighter safety around solar PV systems

    Energy Technology Data Exchange (ETDEWEB)

    Harris, B. [Sustainable Energy Technologies, Calgary, AB (Canada)

    2010-11-15

    The article discussed new considerations for installing photovoltaic (PV) systems that address the needs of fire service personnel. The presence of a PV system presents a multitude of dangers for firefighters, including electrical shock, the inhalation of toxic gases from being unable to cut a hole through the roof, falling debris and flying glass, and dead loading on a compromised structure and tripping on conduits. Mapping systems should be modified so that buildings with PV systems are identified for first responders, including firefighters who should learn that solar modules present an electrical hazard during the day but not at night; covering PV modules with foam or salvage covers may not shut the system down to a safe level; it takes a few moments for the power in PV modules to reduce to zero; and PV modules or conduit should never be cut, broke, chopped, or walked upon. The California Department of Forestry and Fire Protection recommends creating pathways and allowing easier access to the roof by setting the modules back from roof edges, creating a structurally sound pathway for firefighters to walk on and space to cut ventilation holes. However, the setback rule makes the economics of solar installation less viable for residential applications. The technological innovations aimed at addressing system safety all focus on limiting firefighter contact with live electrical components to within the extra-low-voltage (ELV) band. Some of the inverters on the market that support ELV system architecture were described. 1 fig.

  3. Towards mature design of PV powered products

    Energy Technology Data Exchange (ETDEWEB)

    Kan, S.Y.; Beers, S. van; Brezet, H. [Delft University of Technology, Faculty of Industrial Design Engineering, Section Design for Sustainability Program, Delft (Netherlands)

    2004-07-01

    The appearance and the actual convenience of photovoltaic (PV) powered products is often not properly considered in sustainable product design. We undertook an endeavour to identify and chart the main factors that need to be improved in order to reduce those neglects and to stimulate a broader use of PV cells in products. Moreover this paper will stir up the discussion on mature design quality of sustainable products. The word 'mature' can for instance mean timeless design. Some solutions and synergetic proper novel technologies are proposed for achieving a sound integration of PV cells into products. An introduction of mature design by optimizing ergonomical aspects, appearance and product - user context relevance is given. In particular the emphasis will be on good matching of the overall design with the PV cell characteristics. The uses of curved coloured PV surfaces will be highlighted. Although the appearance of PV powered products obviously contributes towards the diffusion of such products, it still remains a point of discussion what kind of appearance is decisive in this process. (orig.)

  4. PV Obelisk - Information system with photovoltaics

    International Nuclear Information System (INIS)

    This final report for the Swiss Federal Office of Energy (SFOE) describes the development of an information system powered by a photovoltaic (PV) array. As an innovative approach, the 'PV-Obelisk' project is the combination of PV with a multi-functional pillar made of natural stone in an aesthetic way. The PV modules serve both as a power supply and as a design element. Two initial prototypes led the way to a third, optimised consumer configuration that was planned to guarantee maximum user frequency. Test operation in front of the 'Heidiland' motor way restaurant confirmed the market analyses made and delivered the expected results. The product, whose three LCD displays are updated via a mobile telephony-based text-message system, proved its technical reliability and showed a high user frequency. Because of the high overall energy consumption, PV power can only partially contribute to the energy supply needed. Various compromises in the technical and aesthetic areas are discussed that were made for the sake of product acceptance in the market. The range of application areas for such a 'PV Obelisk' are discussed and the need for early co-ordination with urban planners is stressed

  5. Salacia campestris root bark extract: peroxidase inhibition, antioxidant and antiradical profile

    Directory of Open Access Journals (Sweden)

    José Carlos Rebuglio Vellosa

    2009-03-01

    Full Text Available Reactive oxygen species (ROS and free radical species have been implicated in initiating or accompanying many diseases in living organisms; there is thus, a continual need for antioxidants molecules to inactivate ROS/free radicals. Many studies of plants crude extracts have demonstrated free-radical scavenging and antioxidant action. Salacia species have long been used, in several countries, as traditional medicines against certain diseases and for their anti-inflammatory properties. In this study, Salacia campestris Walp (Hippocrateaceae root bark ethanol extract (ScEtOH was assessed for its ability to scavenge free radicals and reactive oxygen species; the results were expressed as percentage inhibition of the active species. ScEtOH was efficient against studied species: DPPH radical (obtained inhibition = 30%, ABTS•+ (IC50 = 1.8±0.8 μg/mL, HOCl (IC50 = 1.7 ± 0.1 μg/mL, O2•- (obtained inhibition = 32%, and NO• (obtained inhibition = 18 %. Peroxidase activity inhibition was evaluated through the guaiacol oxidation reaction catalyzed by hemin, HRP and myeloperoxidase (MPO; data showed that ScEtOH at 10 μg/mL led to 54 and 51% of inhibition, respectively, for the hemin and HRP systems. In the MPO system, ScEtOH promoted a 50% inhibition at 8.9 μg/mL, whereas quercetin, a powerful MPO inhibitor, inhibited this system at 1.35 μg/mL.Espécies reativas do oxigênio (ERO e radicais livres estão relacionados ao início ou à exacerbação de muitas doenças em organismos vivos; existindo portanto uma necessidade contínua por moléculas antioxidantes que inativem as ERO e radicais livres. Muitos estudos com extratos brutos de plantas têm demonstrado propriedades antioxidantes e seqüestradoras de radicais livres. Espécies de Salacia são utilizadas, em muitos países, como remédio tradicional contra certas doenças e por suas propriedades antiinflamatórias. Neste estudo, o extrato bruto etanólico da casca da raiz da Salacia

  6. Use of meteorological radar to estimate leaf wetness as data input for application of territorial epidemiological model (downy mildew—Plasmopara viticola)

    Science.gov (United States)

    Cicogna, A.; Dietrich, S.; Gani, M.; Giovanardi, R.; Sandra, M.

    The grapevine downy mildew ( Plasmopara viticola) represents the most important disease of the grapevine in Friuli-Venezia Giulia Region (Italy). The development of this disease depends from the meteorological conditions and particularly by air humidity, rain and leaf wetness (LW here after). Forecast models can help the technicians of the extension services to predict the timing and the best technique to use in operative programs. Unfortunately these models require data, coming from meteorological stations which are often variable in space (e.g. rain, leaf wetness) and hardly spatializable. In the first part of this work, a case study is presented to show the great difference between maps of daily rain duration, obtained by radar, and those created by spatialization of data and obtained by weather stations. Then the possibility to use the radar rain maps appears very interesting to estimate LW over a large area. LW and daily rain measurements, obtained by 14 weather stations of Friuli-Venezia Giulia plain (Italy), are compared with rain maps obtained by polarimetric radar GPM-500 placed in Fossalon di Grado (Friuli-Venezia Giulia, Italy). The reference measurements are made during two periods: from 1/4/2000 to 30/9/2000 and from 1/4/2001 to 30/9/2001. From radar maps rain measurements estimated are extracted above each weather station and these data are integrated for every hour. These radar data of hourly rain are compared to the corresponding measurementes of LW and rain obtained by weather stations. From this analysis it appears that there is a good correlation between the number of rain hours estimated by radar and the number of LW hours measured by stations: in the observed cases, the error found is lower than 2%; then radar has a good precision to estimate LW due to rain. Therefore the use of Radar is foretold to give meteorological inputs in simulation models that can work to evaluate the development of fungal diseases. In the second part a model to daily

  7. Assessing the PV business opportunities in Greece

    International Nuclear Information System (INIS)

    Highlights: • An approach of qualitative judgments for the PV opportunities through the assessing of the licenses’ value in Greece. • It can be supplied in other countries by applying different weights to the criteria. • It can be used by everyone in order to find a suitable PV investment without the need of experts in the field. - Abstract: Greece, as a member of the European Union (EU), has undertaken the obligation to meet the expected goals for the penetration of Renewable Energy Sources (RES) in the national energy balance in compliance with “20–20–20” goals (20% of the Gross Energy Consumption and 40% of the Gross Electricity Consumption should be covered by RES). Although the development of RES, and particularly of Photovoltaic (PV), in Greece during the last years has presented a satisfactory growth, the country is still far away from the above goals. The main reason for this delay is that – except the financial crisis – many licenses are inactive and waiting funding in order to be utilized. Additionally, the latest law (L.4152/2013) has forbidden the interconnection of new PV power Plants to the grid until the end of 2013. The above fact determines the significance of the existing PV Licenses in achieving the national goals. The aim of this paper is to present an integrated approach of qualitative judgments for the PV business opportunities through the assessing of the licenses’ value in Greece. The approach, which is based on a Multi Criteria Decision Making (MCDM) theory of quantifying multiple qualitative judgments, takes into account the real factors which can affect the expected production and cost of the PV installation and therefore the RoI (Return of Investment)

  8. Optimization of PV-based energy production by dynamic PV-panel/inverter configuration

    DEFF Research Database (Denmark)

    Paasch, Kasper; Nymand, Morten; Haase, Frerk

    This paper investigates the possible increase in annual energy production of a PV system with more than one MPPT (maximum power point tracker) input channels under Nordic illumination conditions, in case a concept of dynamic switching of the PV panels is used at the inputs of the inverters....

  9. PV/T slates - Laboratory measurements; PV/T-Schiefer. Labormessungen

    Energy Technology Data Exchange (ETDEWEB)

    Kropf, S.

    2003-07-01

    This comprehensive, illustrated report for the Swiss Federal Office of Energy (SFOE) is one a series of five reports dealing with increasing the overall efficiency of photovoltaic (PV) installations by also using the heat collected by the dark-coloured PV panels. The work reported on addresses open questions on the use of the heat and its optimal use. This report deals with an experimental outdoor set-up and reviews in-situ measurements made on a prototype of a ventilated PV-tile system (PV/T-Slates). The report describes the configuration and construction of the experimental PV-tiled roof and the measurement system used to measure its electrical and thermal performance. The results of the measurements made are presented in detail in graphical form. The influence of various factors such as air-slit width and mounting angle are discussed.

  10. Evaluation of in vitro anticancer activity of Ocimum basilicum, Alhagi maurorum, Calendula officinalis and their parasite Cuscuta campestris.

    Science.gov (United States)

    Behbahani, Mandana

    2014-01-01

    The present investigation was carried out to study the relationship between presence of cytotoxic compounds in Ocimum basilicum, Alhagi maurorum, Calendula officinalis and their parasite Cuscuta campestris. The cytotoxic activity of the pure compounds was performed by MTT assay against breast cancer cell lines (MCF-7 and MDA-MB-231) and normal breast cell line (MCF 10A). The induction of apoptosis was measured by the expression levels of p53, bcl-2, bax and caspase-3 genes using quantitative Real Time PCR. Three active fractions were detected by nuclear magnetic resonance as lutein, lupeol and eugenol, respectively, in C. officinalis, A. maurorum and O. basilicum. These compounds and their epoxidized forms were also detected in their parasite C. campestris. The cytotoxic activity of lutein epoxide, lupeol epoxide and eugenol epoxide was significantly more than lutein, lupeol and eugenol. The mRNA expression level of p53, caspase-3 and bax genes were increased in both cancer cells treated with all pure compounds. However, bcl-2 gene expression decreased in treated breast cancer cells. In conclusion, all the data indicated that the epoxide forms of lupeol, lutein and eugenol are potential drug candidates for inducing apoptosis in human breast cancer cells. PMID:25548920

  11. Evaluation of in vitro anticancer activity of Ocimum basilicum, Alhagi maurorum, Calendula officinalis and their parasite Cuscuta campestris.

    Directory of Open Access Journals (Sweden)

    Mandana Behbahani

    Full Text Available The present investigation was carried out to study the relationship between presence of cytotoxic compounds in Ocimum basilicum, Alhagi maurorum, Calendula officinalis and their parasite Cuscuta campestris. The cytotoxic activity of the pure compounds was performed by MTT assay against breast cancer cell lines (MCF-7 and MDA-MB-231 and normal breast cell line (MCF 10A. The induction of apoptosis was measured by the expression levels of p53, bcl-2, bax and caspase-3 genes using quantitative Real Time PCR. Three active fractions were detected by nuclear magnetic resonance as lutein, lupeol and eugenol, respectively, in C. officinalis, A. maurorum and O. basilicum. These compounds and their epoxidized forms were also detected in their parasite C. campestris. The cytotoxic activity of lutein epoxide, lupeol epoxide and eugenol epoxide was significantly more than lutein, lupeol and eugenol. The mRNA expression level of p53, caspase-3 and bax genes were increased in both cancer cells treated with all pure compounds. However, bcl-2 gene expression decreased in treated breast cancer cells. In conclusion, all the data indicated that the epoxide forms of lupeol, lutein and eugenol are potential drug candidates for inducing apoptosis in human breast cancer cells.

  12. Crystallization and preliminary X-ray diffraction studies of Xanthomonas campestris PNPase in the presence of c-di-GMP

    International Nuclear Information System (INIS)

    Crystals of S1-domain-truncated X. campestris PNPase were grown in the presence of c-di-GMP and diffracted to a resolution of 2.00 Å. Bacterial polynucleotide phosphorylase (PNPase) is a 3′–5′ processive exoribonuclease that participates in mRNA turnover and quality control of rRNA precursors in many bacterial species. It also associates with the RNase E scaffold and other components to form a multi-enzyme RNA degradasome machinery that performs a wider regulatory role in degradation, quality control and maturation of mRNA and noncoding RNA. Several crystal structures of bacterial PNPases, as well as some biological activity studies, have been published. However, how the enzymatic activity of PNPase is regulated is less well understood. Recently, Escherichia coli PNPase was found to be a direct c-di-GMP binding target, raising the possibility that c-di-GMP may participate in the regulation of RNA processing. Here, the successful cloning, purification and crystallization of S1-domain-truncated Xanthomonas campestris PNPase (XcPNPaseΔS1) in the presence of c-di-GMP are reported. The crystals belonged to the monoclinic space group C2, with unit-cell parameters a = 132.76, b = 128.38, c = 133.01 Å, γ = 93.3°, and diffracted to a resolution of 2.00 Å

  13. Cloning, crystallization and preliminary X-ray study of XC1258, a CN-hydrolase superfamily protein from Xanthomonas campestris

    International Nuclear Information System (INIS)

    A CN-hydrolase superfamily protein from the plant pathogen X. campestris has been overexpressed in E. coli, purified and crystallized. CN-hydrolase superfamily proteins are involved in a wide variety of non-peptide carbon–nitrogen hydrolysis reactions, producing some important natural products such as auxin, biotin, precursors of antibiotics etc. These reactions all involve attack on a cyano or carbonyl carbon by a conserved novel catalytic triad Glu-Lys-Cys through a thiol acylenzyme intermediate. However, classification into the CN-hydrolase superfamily based on sequence similarity alone is not straightforward and further structural data are necessary to improve this categorization. Here, the cloning, expression, crystallization and preliminary X-ray analysis of XC1258, a CN-hydrolase superfamily protein from the plant pathogen Xanthomonas campestris (Xcc), are reported. The SeMet-substituted XC1258 crystals diffracted to a resolution of 1.73 Å. They are orthorhombic and belong to space group P21212, with unit-cell parameters a = 143.8, b = 154.63, c = 51.3 Å, respectively

  14. Prospects for PV: a learning curve analysis

    International Nuclear Information System (INIS)

    This article gives an overview of the current state-of-the-art of photovoltaic electricity technology, and addresses its potential for cost reductions over the first few decades of the 21st century. Current PV production cost ranges are presented, both in terms of capacity installation and electricity generation, of single crystalline silicon, multi-crystalline silicon, amorphous silicon and other thin film technologies. Possible decreases of these costs are assessed, as expected according to the learning-curve methodology. We also estimate how much PV could gain if external costs (due to environmental and health damage) of energy were internalised, for example by an energy tax. Our conclusions are that, (1) mainly due its high costs, PV electricity is unlikely to play a major role in global energy supply and carbon emissions abatement before 2020, (2) extrapolating learning curves observed in the past, one can expect its costs to decrease significantly over the coming years, so that a considerable PV electricity share world-wide could materialise after 2020, (3) niche-market applications, e.g. using stand-alone systems in remote areas, are crucial for continuing 'the ride along the learning curve', (4) damage costs of conventional (fossil) power sources are considerable, and their internalisation would improve the competitiveness of PV, although probably not enough to close the current cost gap. (author)

  15. Latin America as new PV market opportunity

    International Nuclear Information System (INIS)

    It is important to recognize solar energy as an international and strategic opportunity for the European market to expand. The objective of this paper is to apply the methodology created during the PV Parity project for analyzing PV Competitiveness in the emerging residential PV market in Brazil, using information from the State of Rio de Janeiro. The dynamic competitiveness analysis was performed considering the price with and without taxes in order to assess the year when PV will reach grid parity in Rio de Janeiro and how the taxes impact on the results. Results are divided into 3 scenarios: Optimistic, Conservative, and Conservative Moderate. The LCOE of residential systems will likely become competitive with the residential electricity tariffs between 2020 and 2030, assuming the residential tariffs in Rio de Janeiro. This is an indicator that PV energy business opportunities are increasing in Brazil and, with the adequate policy support, its market competitiveness could be improved. We are also looking in other markets of Latin America. (full text)

  16. PV performance modeling workshop summary report.

    Energy Technology Data Exchange (ETDEWEB)

    Stein, Joshua S.; Tasca, Coryne Adelle (SRA International, Inc., Fairfax, VA); Cameron, Christopher P.

    2011-05-01

    During the development of a solar photovoltaic (PV) energy project, predicting expected energy production from a system is a key part of understanding system value. System energy production is a function of the system design and location, the mounting configuration, the power conversion system, and the module technology, as well as the solar resource. Even if all other variables are held constant, annual energy yield (kWh/kWp) will vary among module technologies because of differences in response to low-light levels and temperature. A number of PV system performance models have been developed and are in use, but little has been published on validation of these models or the accuracy and uncertainty of their output. With support from the U.S. Department of Energy's Solar Energy Technologies Program, Sandia National Laboratories organized a PV Performance Modeling Workshop in Albuquerque, New Mexico, September 22-23, 2010. The workshop was intended to address the current state of PV system models, develop a path forward for establishing best practices on PV system performance modeling, and set the stage for standardization of testing and validation procedures for models and input parameters. This report summarizes discussions and presentations from the workshop, as well as examines opportunities for collaborative efforts to develop objective comparisons between models and across sites and applications.

  17. POWERED LED LIGHTING SUPPLIED FROM PV CELLS

    Directory of Open Access Journals (Sweden)

    Tirshu M.

    2011-12-01

    Full Text Available The paper deals with practical realization of efficient lighting system based on LED’s of 80W total power mounted on corridor ceiling total length of which is 120m and substitutes existing traditional lighting system consisting of 29 lighting blocks with 4 fluorescent lamps each of them and summary power 2088W. Realized lighting system is supplied from two photovoltaic panels of power 170W. Generated energy by PV cells is accumulated in two accumulators of 75Ah capacity and from battery by means of specialized convertor is applied to lighting system. Additionally, paper present data measured by digital weather station (solar radiation and UV index, which is mounted near of PV cells and comparative analyze of solar energy with real energy generated by PV cells is done. Measured parameters by digital weather station are stored by computer in on-line mode.

  18. Terawatt Challenge for Thin-Film PV

    Energy Technology Data Exchange (ETDEWEB)

    Zweibel, K.

    2005-08-01

    The evolution of PV into one of the world's largest industries is not going to happen without major unforeseen problems. However, this study attempts to address the obvious ones, so that we can put aside the mythology of PV (for example, that it is only ''boutique power'' or that one must pave the world with it to be useful) and get on with changing the world's energy infrastructure. With the years of rapid market growth now under way in PV, the author is sure this will not be the last effort to understand the real potential and pitfalls of meeting the Challenge.

  19. PV production forecast in La Reunion Island

    Science.gov (United States)

    Dubus, L.; Leboucher, V.; Garo, M.

    2010-09-01

    Photovoltaic power production is developing quickly in La Reunion (Indian Ocean). In order to integrate this fluctuating energy source into the network, reliable production forecasts are necessary from real time to day+3. Weather forecasts from standard models are in general inadequate, in particular due to too coarse resolution in this complex orography area. In this study, we use observations (Météo-France) and reanalysis (ERAinterim) fields to evaluate the potential predictability of PV production, for individual solar power plants and from the island aggregated point of view. This in particular allows to select the best weather predictors for PV production. The forecast quality of the selected fields was then established, in order to use only the interesting ones. Finally, NWPs are used to estimate which part of PV production predictability is accessible with state of the art weather forecasting models. This leads to requirements on temporal and spatial resolution of NWP to improve the forecast quality.

  20. PV panel model based on datasheet values

    DEFF Research Database (Denmark)

    Sera, Dezso; Teodorescu, Remus; Rodriguez, Pedro

    This work presents the construction of a model for a PV panel using the single-diode five-parameters model, based exclusively on data-sheet parameters. The model takes into account the series and parallel (shunt) resistance of the panel. The equivalent circuit and the basic equations of the PV cell....../panel in Standard Test Conditions (STC) are shown, as well as the parameters extraction from the data-sheet values. The temperature dependence of the cell dark saturation current is expressed with an alternative formula, which gives better correlation with the datasheet values of the power temperature...... dependence. Based on these equations, a PV panel model, which is able to predict the panel behavior in different temperature and irradiance conditions, is built and tested....

  1. Fertilization in Brassica campestris ssp.pekinensis and its duration of each stage

    Institute of Scientific and Technical Information of China (English)

    PENG Jie; SHEN Jiaheng

    2007-01-01

    This paper reports the process of fertilization in Brassica campestris ssp.pekinensis and the duration of each stage.The results are as follows:(1)Pollen germinates on stigma 2-3 h after pollination.(2)4-8 h after pollination,pollen tube grows in the style.(3)8-14 h after pollination,pollen tube grows in the ovary and gets into the ovule via the micropyle.(4)16 h after pollination,one sperm nucleus moves to the egg and enters it.(5)The sperm nucleus adheres to the nuclear membrane of the egg 18 h after pollination.(6)20 h after pollination,it enters the egg nucleus and male chromatin gradually disperses and 24 h after pollination,a male nucleolus appears.A large female nucleolus and a small male nucleolus occur in the nucleus of the fertilized egg,and zygote formed.The dispersing of sperm chromatin in the egg nucleus takes about 4 h.(7)32--34 h after pollination,the division of zygote begins.The dormancy stage of the zygote lasts for about 8-10 h.(8)The pair polar nuclei lie in the chalazal end of the egg betbre fertilization,which may fuse into a secondary nucleus or not.(9)16-18 h after pollination,the sperm nucleus moves to the polar nuclei or the secondary nucleus.18 h after pollination,the sperm nucleus adheres to the nuclear membrane of the polar nuclei or that of the secondary nucleus.(10)20 h after pollination,the sperm nucleus enters one of the polar nuclei or the secondary nucleus and a triple fusion takes place.The process of fusion is similar to the karyogamy but faster.The dispersing of the sperm chromatin in the polar nucleus or secondary nucleus takes about 2 h.(11)22 h after pollination,the primary endosperm nucleus formed.The female and male nucleoli cannot fuse with each other betbre mitotic division of the primary endosperm nucleus.(12)24 h after pollination,the division of the primary endosperm nucleus actually takes place.

  2. Genetic diversity analysis of brassica napus/brassica campestris progenies using microsatellite markers

    International Nuclear Information System (INIS)

    Genetic diversity and relationship of F2 segregating progenies of interspecific crosses between B. napus N-501/B. campestris C-118 were studied. A set of 90 genotypes (2 parental lines and their 88 F2 progenies) was characterized separately using 24 microsatellite or SSR markers to cover the diversity as broadly as possibly present in them. In initial screening only 12 out of 24 SSR primers combination amplified DNA fragments, while the remaining 12 SSR primers did not amplify DNA fragment therefore those 12 SSR molecular markers were not used for further analysis. The 12 SSR primer combinations generated a total of 33 alleles, of that 32 were polymorphic loci, whereas only one was monomorphic locus. Primers BRMS-19 and BRMS-40 were highly polymorphic producing 4 bands each. Primer Ra2-D04 was less polymorphic and it produced only one band. The proportion of polymorphic loci was 95.83% which indicates high genetic diversity among the progenies. The average number of polymorphic alleles per locus was 2.66. The PIC values ranged from 0.395 for primer Ra2-E03 to 0.726 for primer BRMS-019 with an average genetic diversity (PIC value) of 0.584 per locus. Seven primers showed PIC values above 0.5 (50%) indicating high genetic diversity in the studied plant materials. Pair-wise similarity indices among 90 genotypes ranged from 0.3 to 0.95. Dendrogram obtained through UPGMA clustering of F2 progenies depicted eight main groups using similarity coefficient of 0.70. The progenies could be similar to their parents if they have the same banding patterns as that of the parents and could be distinguished from each other by the combination of fragments which are repeatedly present in one progeny and absent in the other. Considerable genetic diversity has been found among the F2 segregating progenies and their parents using SSR markers thus, SSR analysis proved to be a useful tool. (author)

  3. Real time PV manufacturing diagnostic system

    Energy Technology Data Exchange (ETDEWEB)

    Kochergin, Vladimir [MicroXact Inc., Blacksburg, VA (United States); Crawford, Michael A. [MicroXact Inc., Blacksburg, VA (United States)

    2015-09-01

    The main obstacle Photovoltaic (PV) industry is facing at present is the higher cost of PV energy compared to that of fossil energy. While solar cell efficiencies continue to make incremental gains these improvements are so far insufficient to drive PV costs down to match that of fossil energy. Improved in-line diagnostics however, has the potential to significantly increase the productivity and reduce cost by improving the yield of the process. On this Phase I/Phase II SBIR project MicroXact developed and demonstrated at CIGS pilot manufacturing line a high-throughput in-line PV manufacturing diagnostic system, which was verified to provide fast and accurate data on the spatial uniformity of thickness, an composition of the thin films comprising the solar cell as the solar cell is processed reel-to-reel. In Phase II project MicroXact developed a stand-alone system prototype and demonstrated the following technical characteristics: 1) ability of real time defect/composition inconsistency detection over 60cm wide web at web speeds up to 3m/minute; 2) Better than 1mm spatial resolution on 60cm wide web; 3) an average better than 20nm spectral resolution resulting in more than sufficient sensitivity to composition imperfections (copper-rich and copper-poor regions were detected). The system was verified to be high vacuum compatible. Phase II results completely validated both technical and economic feasibility of the proposed concept. MicroXact’s solution is an enabling technique for in-line PV manufacturing diagnostics to increase the productivity of PV manufacturing lines and reduce the cost of solar energy, thus reducing the US dependency on foreign oil while simultaneously reducing emission of greenhouse gasses.

  4. Economic perspective of PV electricity in Oman

    International Nuclear Information System (INIS)

    Solar and wind energies are likely to play an important role in the future energy generation in Oman. This paper utilizes average daily global solar radiation and sunshine duration data of 25 locations in Oman to study the economic prospects of solar energy. The study considers a solar PV power plant of 5-MW at each of the 25 locations. The global solar radiation varies between slightly greater than 4 kWh/m2/day at Sur to about 6 kWh/m2/day at Marmul while the average value in the 25 locations is more than 5 kWh/m2/day. The results show that the renewable energy produced each year from the PV power plant varies between 9000 MWh at Marmul and 6200 MWh at Sur while the mean value is 7700 MWh of all the 25 locations. The capacity factor of PV plant varies between 20% and 14% and the cost of electricity varies between 210 US$/MWh and 304 US$/MWh for the best location to the least attractive location, respectively. The study has also found that the PV energy at the best location is competitive with diesel generation without including the externality costs of diesel. Renewable energy support policies that can be implemented in Oman are also discussed. -- Research highlights: → The global solar radiation values for 25 locations in Oman are obtained using satellite data that are corrected by data from ground stations. → The study considers a solar PV power plant of 5-MW to calculate the capacity factor (CF) and the cost of energy (COE) at each of the 25 locations. → The study has found that the CF of PV plant varies between 20% and 14% and the corresponding COE varies between 210 US$/MWh and 304 US$/MWh for the best location to the least attractive location, respectively. → The study has found that the PV energy at the best location is competitive with diesel generation without including the externality costs of diesel. → Since PV energy is not competitive with fossil fuel-based generation in most locations renewable energy support mechanisms have been reviewed.

  5. Seasonal energy storage - PV-hydrogen systems

    Energy Technology Data Exchange (ETDEWEB)

    Leppaenen, J. [Neste Oy/NAPS (Finland)

    1998-10-01

    PV systems are widely used in remote areas e.g. in telecommunication systems. Typically lead acid batteries are used as energy storage. In northern locations seasonal storage is needed, which however is too expensive and difficult to realise with batteries. Therefore, a PV- battery system with a diesel backup is sometimes used. The disadvantages of this kind of system for very remote applications are the need of maintenance and the need to supply the fuel. To overcome these problems, it has been suggested to use hydrogen technologies to make a closed loop autonomous energy storage system

  6. Colonización radical por endófitos fúngicos en Trithrinax campestris (Arecaceae de ecosistemas semiáridos del centro de Argentina Root colonization by fungal endophytes in Trithrinax campestris (Arecaceae from semiarid ecosystems from Central Argentine

    Directory of Open Access Journals (Sweden)

    Mónica A Lugo

    2011-12-01

    Full Text Available En ecosistemas áridos y semiáridos las raíces de las plantas suelen formar simbiosis con hongos, los que les proporcionan nutrientes y agua. Poco se conoce sobre los hongos asociados a palmeras nativas y cómo éstos podrían estar relacionados entre ellos. Se describe y cuantifica la colonización radical de los simbiontes de Trithrinax campestris en poblaciones leve y fuertemente afectadas por el fuego. T. campestris fue colonizada por hongos micorrícico-arbusculares (HMA y endófitos septados oscuros (ESO. La colonización por HMA fue del tipo intermedio entre los tipos Arum y Paris. La colonización por HMA y ESO y la producción de pelos radicales, presentó diferencias entre las poblaciones estudiadas. Los resultados sugieren que en T. campestris la relación entre hongos simbiontes/producción de pelos radicales podrían estar relacionada con su alta tolerancia al fuego y la aridez.In arid and semiarid ecosystems, roots frequently form symbiosis with fungi that provides access to nutrients and water. Knowledge regarding the study of fungal symbionts colonizing native palms roots is still scarce. We described, quantified and compared fungal colonization in roots of Trithrinax campestris from two environmental situations: population with weak-burning-signs and population with strong-burning-signs. T. campestris was colonized by arbuscular-mycorrhizal-fungi (AMF and dark-septate-endophytes (DSE. AMF colonization was an intermediate type between Arum and Paris. The AMF and DSE colonization and root hair production differed between populations. Our results suggest that in T. campestris the relation between fungal-symbionts and root-hair-production might be related to tolerance to burning and aridity.

  7. International PV QA Task Force's Proposed Comparative Rating System for PV Modules: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Wohlgemuth, J.; Kurtz, S.

    2014-10-01

    The International PV Quality Assurance Task Force is developing a rating system that provides comparative information about the relative durability of PV modules. Development of accelerated stress tests that can provide such comparative information is seen as a major step toward being able to predict PV module service life. This paper will provide details of the ongoing effort to determine the format of such an overall module rating system. The latest proposal is based on using three distinct climate zones as defined in IEC 60721-2-1 for two different mounting systems. Specific stresses beyond those used in the qualification tests are being developed for each of the selected climate zones.

  8. Design optimization of grid-connected PV inverters

    DEFF Research Database (Denmark)

    Koutroulis, Eftichios; Blaabjerg, Frede

    The DC/AC inverters are the key elements in grid-connected PV energy production systems. In this paper, new design optimization techniques focused on transformerless (very high efficiency) PV inverters are proposed. They have been developed based on an analysis of the deficiencies of the current......, state-of-the-art PV inverters design technology, which limits the amount of PV energy supplied into the electric grid. The influences of the electric grid regulations and standards and the PV array operational characteristics on the design of grid-connected PV inverters have also been considered. The...... simulation results verify that the proposed optimization techniques enable the maximization of the PV energy injected into the electric grid by the optimized PV installation....

  9. National survey report on PV power applications in Switzerland 2006

    International Nuclear Information System (INIS)

    This annual report was published by the Swiss Federal Office of Energy (SFOE) as part of the International Energy Agency's work on the exchange and dissemination of information on photovoltaic power systems (PVPS). The political situation in Switzerland with regard to the promotion of photovoltaics (PV) and new legislation in the energy area is discussed. The report provides information on installed PV power, costs and prices and the Swiss PV industry. Examples of PV applications are presented and data on the cumulative installed PV power in various application sectors is presented and discussed. Highlights, major projects and various demonstration and field-test programmes are dealt with, as are public budgets for market stimulation. Figures on the development, production and prices of PV cells and modules are presented. Swiss balance-of-system products are reviewed, as are PV-related services and the value of the Swiss PV business. A review of non-technical factors and new initiatives completes the report.

  10. Produção de goma xantana por cepas nativas de Xanthomonas campestris a partir de casca de cacau ou soro de leite Production of xanthan gum by Xanthomonas campestris strains native from bark cocoa or whey

    Directory of Open Access Journals (Sweden)

    Denis de M. Diniz

    2012-01-01

    Full Text Available Foi estudada a otimização do processo de produção de goma xantana a partir de casca de cacau ou soro de leite como fonte de carbono, e determinou-se o rendimento da goma obtida pela bioconversão de casca de cacau e soro de leite com a Xanthomonas campestris 1182. A goma foi produzida em meios com potássio e nitrogênio a 25 °C, 250 rpm por 120 horas. Os rendimentos foram: 2,335 g.L-1 para a sacarose; 4,995 g.L-1 para a casca de cacau seca e 12,01 g.L-1 utilizando soro de leite. Portanto, é viável a produção de goma xantana utilizando fontes de carbono como a casca de cacau e o soro de leite.The optimization of the production process of xanthan gum from cocoa husks or milk whey as carbon source was studied, and the production rate of gum obtained by the bioconversion of cocoa pods and whey was determined, using Xanthomonas campestris 1182. The gum was produced in a medium with potassium and nitrogen at 25 °C, 250 rpm for 120 hours. The results were: 2.335 g.L-1 for sucrose; 4.995 g.L-1 for cocoa dry pods and 12.01 g.L-1 using whey. Therefore, the production of xanthan gum is feasible upon using carbon sources such as cocoa hulls and whey.

  11. Optimal Design of Modern Transformerless PV Inverter Topologies

    OpenAIRE

    Saridakis, Stefanos; Koutroulis, Eftichios; Blaabjerg, Frede

    2013-01-01

    The design optimization of H5, H6, neutral point clamped, active-neutral point clamped, and conergy-NPC transformerless photovoltaic (PV) inverters is presented in this paper. The components reliability in terms of the corresponding malfunctions, affecting the PV inverter maintenance cost during the operational lifetime period of the PV installation, is also considered in the optimization process. According to the results of the proposed design method, different optimal values of the PV inver...

  12. MPPT algorithm for voltage controlled PV inverters

    DEFF Research Database (Denmark)

    Kerekes, Tamas; Teodorescu, Remus; Liserre, Marco;

    2008-01-01

    This paper presents a novel concept for an MPPT that can be used in case of a voltage controlled grid connected PV inverters. In case of single-phase systems, the 100 Hz ripple in the AC power is also present on the DC side. Depending on the DC link capacitor, this power fluctuation can be used to...

  13. PV experience curves for the Netherlands

    International Nuclear Information System (INIS)

    Experience curves are one of several tools used by policy makers to take a look at market development. Numerous curves have been constructed for PV but none specific to the Netherlands. The objective of this report is to take a look at the price development of grid-connected PV systems in the Netherlands using the experience curve theory. After a literature and internet search and attempts to acquire information from PV companies information on 51% of the totally installed capacity was found. Curves for the period 1991-2001 were constructed based on system price, BOS (balance-of-system) price and inverter price. The progress ratio of the locally learning BOS was similar to the globally learning module market. This indicates that the pace of development of the Dutch PV market is similar to the globally followed pace. Improvement of the detail of the data might help to get a better idea of which BOS components have declined most. The similar progress ratio also shows the importance of investing both in module and system research as is the case in the Netherlands

  14. TRNSYS HYBRID wind diesel PV simulator

    Energy Technology Data Exchange (ETDEWEB)

    Quinlan, P.J.A.; Mitchell, J.W.; Klein, S.A.; Beckman, W.A.; Blair, N.J. [Univ. of Wisconsin, Madison, WI (United States)

    1996-12-31

    The Solar Energy Laboratory (SEL) has developed a wind diesel PV hybrid systems simulator, UW-HYBRID 1.0, an application of the TRNSYS 14.2 time-series simulation environment. An AC/DC bus links up to five diesels and wind turbine models, along with PV modules, a battery bank, and an AC/DC converter. Multiple units can be selected. PV system simulations include solar angle and peak power tracking options. Weather data are Typical Meteorological Year data, parametrically generated synthesized data, or external data files. PV performance simulations rely on long-standing SEL-developed algorithms. Loads data are read as scalable time series. Diesel simulations include estimated fuel-use and waste heat output, and are dispatched using a least-cost of fuel strategy. Wind system simulations include varying air density, wind shear and wake effects. Time step duration is user-selectable. UW-HYBRID 1.0 runs in Windows{reg_sign}, with TRNSED providing a customizable user interface. 12 refs., 6 figs.

  15. Final Technical Report: PV Fault Detection Tool.

    Energy Technology Data Exchange (ETDEWEB)

    King, Bruce Hardison [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jones, Christian Birk [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-12-01

    The PV Fault Detection Tool project plans to demonstrate that the FDT can (a) detect catastrophic and degradation faults and (b) identify the type of fault. This will be accomplished by collecting fault signatures using different instruments and integrating this information to establish a logical controller for detecting, diagnosing and classifying each fault.

  16. PV-mooduli toodang suurfarmis / Teolan Tomson

    Index Scriptorium Estoniae

    Tomson, Teolan, 1932-

    2015-01-01

    Artiklis uuritakse PV-paneelide tootlikkuse langust nende vastastikuse varjutamise tõttu. Näidatakse, et Eesti oludes on soovitav kasutada paneelide madalaid kaldenurki ja suhtelist reavahet, mis ületab paneeli kõrguse pooleteistkordset väärtust

  17. Invisible photovoltaics - PV basics + 25 design examples

    NARCIS (Netherlands)

    Meekma, L.T.; Valdes Cano, N.A.; Zhindon Andrade, P.

    2015-01-01

    This "designers' manual" is made during the TIDO-course AR0531 Innovation and Sustainability This manual is intended for architects and designers. Its main objective is to address PV technology as a building material alternative for the architect to incorporate in his design repertoire.

  18. Commercialization of PV-powered pumping systems for use in utility PV service programs. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The project described in this report was a commercialization effort focused on cost-effective remote water pumping systems for use in utility-based photovoltaic (PV) service programs. The project combined a commercialization strategy tailored specifically for electric utilities with the development of a PV-powered pumping system that operates conventional ac pumps rather than relying on the more expensive and less reliable PV pumps on the market. By combining these two attributes, a project goal was established of creating sustained utility purchases of 250 PV-powered water pumping systems per year. The results of each of these tasks are presented in two parts contained in this Final Summary Report. The first part summarizes the results of the Photovoltaic Services Network (PSN) as a new business venture, while the second part summarizes the results of the Golden Photon system installations. Specifically, results and photographs from each of the system installations are presented in this latter part.

  19. Impedance characterization of PV modules in outdoor conditions

    DEFF Research Database (Denmark)

    Oprea, Matei-lon; Thorsteinsson, Sune; Spataru, Sergiu;

    2016-01-01

    Impedance spectroscopy (IS) has been used for laboratory characterizations of photovoltaic (PV) technologies under well controlled conditions. This work applies IS for outdoor characterization of PV panels, in order to observe the effect of irradiance (G) and temperature (T) on the PV module...

  20. Remote and Centralized Monitoring of PV Power Plants

    DEFF Research Database (Denmark)

    Kopacz, Csaba; Spataru, Sergiu; Sera, Dezso;

    2014-01-01

    measurements from the inverters within each PV plant. The monitoring software stores the PV measurements in a data warehouse optimized for managing and data mining large amounts of data, from where it can be later visualized, analyzed and exported. By combining PV production measurements data with I-V curve...

  1. High Resolution PV Power Modeling for Distribution Circuit Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Norris, B. L.; Dise, J. H.

    2013-09-01

    NREL has contracted with Clean Power Research to provide 1-minute simulation datasets of PV systems located at three high penetration distribution feeders in the service territory of Southern California Edison (SCE): Porterville, Palmdale, and Fontana, California. The resulting PV simulations will be used to separately model the electrical circuits to determine the impacts of PV on circuit operations.

  2. Die Untersuchung der Erkennung von Plasmopara viticola durch VRP1 Rezeptoren und der Regulation der Pathogenabwehr durch die Transkriptionsfaktoren VvWRKY33 und VvERF5 in der Weinrebe (Vitis sp.)

    OpenAIRE

    Merz, Patrick Roman

    2014-01-01

    Die Weinrebe (Vitis vinifera L. ssp. vinifera) gehört zu den bedeutendsten Kulturpflanzen weltweit. Ihre hohe Anfälligkeit für eine Vielzahl von Pathogenen, insbesondere dem Echten (Erysiphe necator) und Falschen Mehltau (Plasmopara viticola), ist für den Weinbau eine besondere wirtschaftliche Bedrohung und kann zu erheblichen Ernteausfällen führen. Nicht zuletzt darum werden in Europa zwei Drittel der Gesamtmenge an Fungiziden im Weinbau eingesetzt. Um den Fungizideinsatz zu reduzieren, soll...

  3. Genome-wide sequencing reveals two major sub-lineages in the genetically monomorphic pathogen xanthomonas campestris pathovar musacearum.

    Science.gov (United States)

    Wasukira, Arthur; Tayebwa, Johnbosco; Thwaites, Richard; Paszkiewicz, Konrad; Aritua, Valente; Kubiriba, Jerome; Smith, Julian; Grant, Murray; Studholme, David J

    2012-01-01

    The bacterium Xanthomonas campestris pathovar musacearum (Xcm) is the causal agent of banana Xanthomonas wilt (BXW). This disease has devastated economies based on banana and plantain crops (Musa species) in East Africa. Here we use genome-wide sequencing to discover a set of single-nucleotide polymorphisms (SNPs) among East African isolates of Xcm. These SNPs have potential as molecular markers for phylogeographic studies of the epidemiology and spread of the pathogen. Our analysis reveals two major sub-lineages of the pathogen, suggesting that the current outbreaks of BXW on Musa species in the region may have more than one introductory event, perhaps from Ethiopia. Also, based on comparisons of genome-wide sequence data from multiple isolates of Xcm and multiple strains of X. vasicola pathovar vasculorum, we identify genes specific to Xcm that could be used to specifically detect Xcm by PCR-based methods. PMID:24704974

  4. PV Obelisk - Information system with photovoltaics; PV-Obelisk Orientierungssystem mit Photovoltaik

    Energy Technology Data Exchange (ETDEWEB)

    Ruoss, D.; Rasmussen, J.

    2004-07-01

    This final report for the Swiss Federal Office of Energy (SFOE) describes the development of an information system powered by a photovoltaic (PV) array. As an innovative approach, the 'PV-Obelisk' project is the combination of PV with a multi-functional pillar made of natural stone in an aesthetic way. The PV modules serve both as a power supply and as a design element. Two initial prototypes led the way to a third, optimised consumer configuration that was planned to guarantee maximum user frequency. Test operation in front of the 'Heidiland' motor way restaurant confirmed the market analyses made and delivered the expected results. The product, whose three LCD displays are updated via a mobile telephony-based text-message system, proved its technical reliability and showed a high user frequency. Because of the high overall energy consumption, PV power can only partially contribute to the energy supply needed. Various compromises in the technical and aesthetic areas are discussed that were made for the sake of product acceptance in the market. The range of application areas for such a 'PV Obelisk' are discussed and the need for early co-ordination with urban planners is stressed.

  5. Comparison of photovoltaic (PV) panel usage in different climates

    OpenAIRE

    Kayalar, Rasiha

    2013-01-01

    ABSTRACT: In this thesis, PV panel usages will be analyzed in variable climates. By the way, during the research several case studies selected from both hot and cold climates will be observed, researched and calculated in order to find the best design principles for PV panel designs. So, comparative design method is selected to compare cold climate PV panel designs with hot climate PV panel designs. According to the findings, before designing the PV panel to the roof or facade or to the site,...

  6. Voltage rise mitigation for solar PV integration at LV grids

    DEFF Research Database (Denmark)

    Yang, Guangya; Marra, Francesco; Juamperez Goñi, Miguel Angel;

    2015-01-01

    Solar energy from photovoltaic (PV) is among the fastest developing renewable energy systems worldwide. Driven by governmental subsidies and technological development, Europe has seen a fast expansion of solar PV in the last few years. Among the installed PV plants, most of them are situated...... at the distribution systems and bring various operational challenges such as power quality and power flow management. The paper discusses the modelling requirements for PV system integration studies, as well as the possible techniques for voltage rise mitigation at low voltage (LV) grids for increasing PV penetration...

  7. Technologies to Increase PV Hosting Capacity in Distribution Feeders: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Ding, Fei; Mather, Barry; Gotseff, Peter

    2016-08-01

    This paper studies the distributed photovoltaic (PV) hosting capacity in distribution feeders by using the stochastic analysis approach. Multiple scenario simulations are conducted to analyze several factors that affect PV hosting capacity, including the existence of voltage regulator, PV location, the power factor of PV inverter and Volt/VAR control. Based on the conclusions obtained from simulation results, three approaches are then proposed to increase distributed PV hosting capacity, which can be formulated as the optimization problem to obtain the optimal solution. All technologies investigated in this paper utilize only existing assets in the feeder and therefore are implementable for a low cost. Additionally, the tool developed for these studies is described.

  8. Battery Energy Storage System for PV Output Power Leveling

    OpenAIRE

    Rajkiran Singh; Seyedfoad Taghizadeh; Nadia Mei Lin Tan; Jagadeesh Pasupuleti

    2014-01-01

    Fluctuating photovoltaic (PV) output power reduces the reliability in power system when there is a massive penetration of PV generators. Energy storage systems that are connected to the PV generators using bidirectional isolated dc-dc converter can be utilized for compensating the fluctuating PV power. This paper presents a grid connected energy storage system based on a 2 kW full-bridge bidirectional isolated dc-dc converter and a PWM converter for PV output power leveling. This paper propos...

  9. Prospects for PV generation and market in China

    International Nuclear Information System (INIS)

    Installation of PV power station in remote areas have benefited the local people solving a difficulty of no electricity. But the rural PV demonstration project is for assisting some poor residents without payback and completed for a society benefit. During the design of urban domestic architecture of the residential PV system integration with building, then the cost of PV will be acceptable comparing the cost of land and building. Especially while AC power is put into the market, the residential PV generation should be the more accessible

  10. PV_LIB Toolbox v. 1.3

    Energy Technology Data Exchange (ETDEWEB)

    2015-12-09

    PV_LIB comprises a library of Matlab? code for modeling photovoltaic (PV) systems. Included are functions to compute solar position and to estimate irradiance in the PV system’s plane of array, cell temperature, PV module electrical output, and conversion from DC to AC power. Also included are functions that aid in determining parameters for module performance models from module characterization testing. PV_LIB is open source code primarily intended for research and academic purposes. All algorithms are documented in openly available literature with the appropriate references included in comments within the code.

  11. Accelerating residential PV expansion: demand analysis for competitive electricity markets

    International Nuclear Information System (INIS)

    This article quantifies the potential market for grid-connected, residential photovoltaic (PV) electricity integrated into new homes built in the US. It complements an earlier supply-side analysis by the authors that demonstrates the potential to reduce PV module prices below $1.5/Wp by scaling up existing thin-film technology in 100 MWp/yr manufacturing facilities. The present article demonstrates that, at that price, PV modules may be cost effective in 125,000 new home installations per year (0.5 GWp/yr). While this market is large enough to support multiple scaled up thin-film PV factories, inefficient energy pricing and demand-side market failures will inhibit prospective PV consumers without strong public policy support. Net metering rules, already implemented in many states to encourage PV market launch, represent a crude but reasonable surrogate for efficient electricity pricing mechanisms that may ultimately emerge to internalize the externality benefits of PV. These public benefits include reduced air pollution damages (estimated costs of damage to human health from fossil fuel power plants are presented in Appendix A), deferral of transmission and distribution capital expenditures, reduced exposure to fossil fuel price risks, and increased electricity system reliability for end users. Thus, net metering for PV ought to be implemented as broadly as possible and sustained until efficient pricing is in place. Complementary PV 'buydowns' (e.g., a renewable portfolio standard with a specific PV requirement) are needed to jumpstart regional PV markets

  12. NCBI nr-aa BLAST: CBRC-LAFR-01-0106 [SEVENS

    Lifescience Database Archive (English)

    Full Text Available CBRC-LAFR-01-0106 ref|YP_242368.1| MFS transporter [Xanthomonas campestris pv. camp...estris str. 8004] gb|AAY48348.1| MFS transporter [Xanthomonas campestris pv. campestris str. 8004] YP_242368.1 1.2 24% ...

  13. NCBI nr-aa BLAST: CBRC-PABE-24-0066 [SEVENS

    Lifescience Database Archive (English)

    Full Text Available CBRC-PABE-24-0066 ref|NP_638404.1| cobalamin synthase [Xanthomonas campestris pv. c...ampestris str. ATCC 33913] gb|AAM42328.1| cobalamin synthase [Xanthomonas campestris pv. campestris str. ATCC 33913] NP_638404.1 0.21 30% ...

  14. NCBI nr-aa BLAST: CBRC-CBRE-01-0086 [SEVENS

    Lifescience Database Archive (English)

    Full Text Available CBRC-CBRE-01-0086 gb|AAM42931.1| Na+:H+ antiporter [Xanthomonas campestris pv. camp...estris str. ATCC 33913] gb|AAY50772.1| Na+:H+ antiporter [Xanthomonas campestris pv. campestris str. 8004] AAM42931.1 0.42 31% ...

  15. NCBI nr-aa BLAST: CBRC-LAFR-01-1825 [SEVENS

    Lifescience Database Archive (English)

    Full Text Available CBRC-LAFR-01-1825 ref|YP_242368.1| MFS transporter [Xanthomonas campestris pv. camp...estris str. 8004] gb|AAY48348.1| MFS transporter [Xanthomonas campestris pv. campestris str. 8004] YP_242368.1 0.036 28% ...

  16. Plasmodium vivax Tryptophan Rich Antigen PvTRAg36.6 Interacts with PvETRAMP and PvTRAg56.6 Interacts with PvMSP7 during Erythrocytic Stages of the Parasite.

    Science.gov (United States)

    Tyagi, Kriti; Hossain, Mohammad Enayet; Thakur, Vandana; Aggarwal, Praveen; Malhotra, Pawan; Mohmmed, Asif; Sharma, Yagya Dutta

    2016-01-01

    Plasmodium vivax is most wide spread and a neglected malaria parasite. There is a lack of information on parasite biology of this species. Genome of this parasite encodes for the largest number of tryptophan-rich proteins belonging to 'Pv-fam-a' family and some of them are potential drug/vaccine targets but their functional role(s) largely remains unexplored. Using bacterial and yeast two hybrid systems, we have identified the interacting partners for two of the P. vivax tryptophan-rich antigens called PvTRAg36.6 and PvTRAg56.2. The PvTRAg36.6 interacts with early transcribed membrane protein (ETRAMP) of P.vivax. It is apically localized in merozoites but in early stages it is seen in parasite periphery suggesting its likely involvement in parasitophorous vacuole membrane (PVM) development or maintenance. On the other hand, PvTRAg56.2 interacts with P.vivax merozoite surface protein7 (PvMSP7) and is localized on merozoite surface. Co-localization of PvTRAg56.2 with PvMSP1 and its molecular interaction with PvMSP7 probably suggest that, PvTRAg56.2 is part of MSP-complex, and might assist or stabilize the protein complex at the merozoite surface. In conclusion, the PvTRAg proteins have different sub cellular localizations and specific associated functions during intra-erythrocytic developmental cycle. PMID:26954579

  17. Impact of Rooftop Solar PV on Residential Distribution Network

    DEFF Research Database (Denmark)

    Bhattarai, Bishnu Prasad; Bak-Jensen, Birgitte; Pillai, Jayakrishnan Radhakrishna;

    Increased environmental awareness in recent years has encouraged rapid growth of renewable energy sources especially solar PV and wind. Among them, small scale solar PV has been gaining more momentum especially at residential level. Even today moderate penetration of grid tied rooftop solar PV has...... become reality in many countries. In spite of various benefits, higher penetration of rooftop PVs might come up with number of detrimental effects, with power quality and overcurrent protection being the major ones. Therefore, it is reasonable to quantify both drawback and benefits of rooftop PV...... LV feeder provided with small scale rooftop PV. Voltage deviation index (VDI) and power loss index (PLI) has been used to quantify the impacts of PV. Furthermore, overvoltage has been taken as an operational constraint to determine maximum penetration level of PV. The analysis has been performed...

  18. Optimal Design of Modern Transformerless PV Inverter Topologies

    DEFF Research Database (Denmark)

    Saridakis, Stefanos; Koutroulis, Eftichios; Blaabjerg, Frede

    2013-01-01

    The design optimization of H5, H6, neutral point clamped, active-neutral point clamped, and conergy-NPC transformerless photovoltaic (PV) inverters is presented in this paper. The components reliability in terms of the corresponding malfunctions, affecting the PV inverter maintenance cost during......, neutral point clamped, active-neutral point clamped and conergy-NPC PV inverters designed using the proposed optimization process feature lower levelized cost of generated electricity and lifetime cost, longer mean time between failures and inject more PV-generated energy into the electric grid than their...... the operational lifetime period of the PV installation, is also considered in the optimization process. According to the results of the proposed design method, different optimal values of the PV inverter design variables are derived for each PV inverter topology and installation site. The H5, H6...

  19. Crystallization and preliminary crystallographic characterization of GumK, a membrane-associated glucuronosyltransferase from Xanthomonas campestris required for xanthan polysaccharide synthesis

    Energy Technology Data Exchange (ETDEWEB)

    Barreras, Máximo [Fundación Instituto Leloir, CONICET, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, C1405BWE Buenos Aires (Argentina); Bianchet, Mario A. [Department of Biophysics and Biophysical Chemistry, Johns Hopkins University, Baltimore, Maryland 21205 (United States); Ielpi, Luis, E-mail: lielpi@leloir.org.ar [Fundación Instituto Leloir, CONICET, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, C1405BWE Buenos Aires (Argentina)

    2006-09-01

    Crystallization of a membrane-associated glucuronosyltransferase. GumK is a membrane-associated inverting glucuronosyltransferase that is part of the biosynthetic route of xanthan, an industrially important exopolysaccharide produced by Xanthomonas campestris. The enzyme catalyzes the fourth glycosylation step in the pentasaccharide-P-P-polyisoprenyl assembly, an oligosaccharide diphosphate lipid intermediate in xanthan biosynthesis. GumK has marginal homology to other glycosyltransferases (GTs). It belongs to the CAZy family GT 70, for which no structure is currently available, and indirect biochemical evidence suggests that it also belongs to the GT-B structural superfamily. Crystals of recombinant GumK from X. campestris have been grown that diffract to 1.9 Å resolution. Knowledge of the crystal structure of GumK will help in understanding xanthan biosynthesis and its regulation and will also allow a subsequent rational approach to enzyme design and engineering. The multiwavelength anomalous diffraction approach will be used to solve the phase problem.

  20. Crystallization and preliminary crystallographic characterization of GumK, a membrane-associated glucuronosyltransferase from Xanthomonas campestris required for xanthan polysaccharide synthesis

    International Nuclear Information System (INIS)

    Crystallization of a membrane-associated glucuronosyltransferase. GumK is a membrane-associated inverting glucuronosyltransferase that is part of the biosynthetic route of xanthan, an industrially important exopolysaccharide produced by Xanthomonas campestris. The enzyme catalyzes the fourth glycosylation step in the pentasaccharide-P-P-polyisoprenyl assembly, an oligosaccharide diphosphate lipid intermediate in xanthan biosynthesis. GumK has marginal homology to other glycosyltransferases (GTs). It belongs to the CAZy family GT 70, for which no structure is currently available, and indirect biochemical evidence suggests that it also belongs to the GT-B structural superfamily. Crystals of recombinant GumK from X. campestris have been grown that diffract to 1.9 Å resolution. Knowledge of the crystal structure of GumK will help in understanding xanthan biosynthesis and its regulation and will also allow a subsequent rational approach to enzyme design and engineering. The multiwavelength anomalous diffraction approach will be used to solve the phase problem

  1. Origins and Evolution of Brassica campestris L.in China%白菜型油菜在中国的起源与进化

    Institute of Scientific and Technical Information of China (English)

    何余堂; 陈宝元; 傅廷栋; 李殿荣; 涂金星

    2003-01-01

    以云南长角(甘蓝型油菜,B.napus)、青海牛尾梢(芥菜型油菜,B.juncea)、汕头芥蓝(B.alboglabra)和黑芥(B.nigra cy giebra)为参照品种,对不同地理来源的82份白菜型油菜(B.campestris L.)资源进行了形态学鉴定和RAPD分子标记分析.利用分子进化遗传分析软件(MEGA)构建白菜型油菜的系统发育树,以揭示白菜型油菜在我国的起源与进化.分析表明:北方小油菜(B.campestris var.oleifera)的起源早于南方油白菜(B.chinensis var.oleifera);冬油菜(Winter type B.campestris var.oleifera)的起源早于春油菜(Spring type B.campestris var.oleifera);关中蔓菁是起源较早的北方小油菜.陕西可能是北方小油菜的起源地,后来逐渐分化出广泛种植于甘肃、青海等地的春油菜;南方油白菜可能起源于云南、贵州、四川、湖北等地.形态性状与分子标记相结合,可用于研究白菜型油菜的起源与进化.

  2. Interaction of the phage-xanthomonas campestris (Pammel) Dowson at the eletronic microscopy level, Virazole effect and radioautographic study of the phage action on the host

    International Nuclear Information System (INIS)

    A bacteriophage from the cabbage tissue infected with Xanthomonas campestris is described. The infection process is studied through a negative staining technique (PTA) and ultrathin section. The effect of Virazole, an antivirus agent, is tested. Radioautography showed that the phage presented a reasonable domain on the bacterial host genome since the beginning of the treatment. Sorological reactions indicated the induction of specific antibodies for the phage. (M.A.C.)

  3. Production of intergeneric allotetraploid between autotetraploid non-heading Chinese cabbage (Brassica campestris ssp. chinensis Makino) and autotetraploid radish (Raphanus sativus L.)

    OpenAIRE

    Sun Cheng-Zhen; Li Ying; Zhang Shu-Ning; Zheng Jin-Shuang

    2014-01-01

    Intergeneric hybrids between non-heading Chinese cabbage (Brassica campestris ssp. chinensis Makino; 2n = 4x = 40) and radish (Raphanus sativus L.; 2n = 4x = 36) were obtained through ovary culture and embryo rescue. Some hybrid embryos (0.11 per ovary) were produced, but only 4 of them germinated. As most hybrid embryos failed to develop into plantlets directly, plants were regenerated by inducing shoots on the cultured cotyledon and inducing roots on the root induction medium. All hybrid pl...

  4. Financial sustainability of PV implementation in Swaziland

    International Nuclear Information System (INIS)

    During the past 10 years, more than 700 Solar Home Systems have been implemented by this project in Swaziland, southern Africa. The implementation process started with household energy surveys, the results of which showing significant energy needs for cooking, lighting and basic communication applications (i.e. radio/TV), particularly in rural areas. An implementation project of Solar Home Systems was set up to start rural electrification with solar PV and focused on lighting and small electrical demands. The national government, whose own resources were limited, supported the project as an important step towards addressing the country's range of energy needs. Together with a local company, Swazitronix, a joint venture was established to facilitate the implementation project. With a project loan from the Dutch social bank, the Triodosbank, standard Solar Home Systems were sold, assembled, installed and serviced. Customers paid the full cost of their PV systems and services. Awareness and education issues also formed key aspects of the project. During a later project phase, credit financing instruments were introduced providing a final element of experience crucial to future project implementation. The project's relative success and experiences (i.e. 82% loan repayment rate, detailed review of the causes behind loan defaults, and monitoring survey results) are detailed herein, providing valuable lessons regarding financial sustainability, the linchpin of successful PV implementation. 8 refs

  5. Energy balance of the global photovoltaic (PV) industry--is the PV industry a net electricity producer?

    Science.gov (United States)

    Dale, Michael; Benson, Sally M

    2013-04-01

    A combination of declining costs and policy measures motivated by greenhouse gas (GHG) emissions reduction and energy security have driven rapid growth in the global installed capacity of solar photovoltaics (PV). This paper develops a number of unique data sets, namely the following: calculation of distribution of global capacity factor for PV deployment; meta-analysis of energy consumption in PV system manufacture and deployment; and documentation of reduction in energetic costs of PV system production. These data are used as input into a new net energy analysis of the global PV industry, as opposed to device level analysis. In addition, the paper introduces a new concept: a model tracking energetic costs of manufacturing and installing PV systems, including balance of system (BOS) components. The model is used to forecast electrical energy requirements to scale up the PV industry and determine the electricity balance of the global PV industry to 2020. Results suggest that the industry was a net consumer of electricity as recently as 2010. However, there is a >50% that in 2012 the PV industry is a net electricity provider and will "pay back" the electrical energy required for its early growth before 2020. Further reducing energetic costs of PV deployment will enable more rapid growth of the PV industry. There is also great potential to increase the capacity factor of PV deployment. These conclusions have a number of implications for R&D and deployment, including the following: monitoring of the energy embodied within PV systems; designing more efficient and durable systems; and deploying PV systems in locations that will achieve high capacity factors. PMID:23441588

  6. Numerical study of PV/T-SAHP system

    Institute of Scientific and Technical Information of China (English)

    Gang PEI; Jie JI; Ke-liang LIU; Han-feng HE; Ai-guo JIANG

    2008-01-01

    In order to utilize solar energy effectively and to achieve a higher electrical efficiency by limiting the operating temperature of the photovoltaic (PV) panel, a novel photovoltaic/thermal solar-assisted heat pump (PV/T-SAHP) system was proposed and constructed. The hybrid solar system generates electricity and thermal energy simultaneously. A distributed parameters model of the PV/T-SAHP system was developed and applied to analyze the system dynamic performance in terms of PV action, photothermal action and Rankine cycle processes. The simulation results indicated that the coefficient of performance (COP) of the proposed PV/T-SAHP can be much better than that of the conventional heat pump. Both PV-efficiency and photothermic efficiency have been improved considerably. The results also showed that the performance of this PV/T-SAHP system was strongly influenced by the evaporator area, tube pitch and tilt angle of the PV/T evaporator, which are the key factors in PV/T-SAHP system optimization and PV/T evaporator design.

  7. Integrating Solar PV in Utility System Operations

    Energy Technology Data Exchange (ETDEWEB)

    Mills, A.; Botterud, A.; Wu, J.; Zhou, Z.; Hodge, B-M.; Heany, M.

    2013-10-31

    This study develops a systematic framework for estimating the increase in operating costs due to uncertainty and variability in renewable resources, uses the framework to quantify the integration costs associated with sub-hourly solar power variability and uncertainty, and shows how changes in system operations may affect these costs. Toward this end, we present a statistical method for estimating the required balancing reserves to maintain system reliability along with a model for commitment and dispatch of the portfolio of thermal and renewable resources at different stages of system operations. We estimate the costs of sub-hourly solar variability, short-term forecast errors, and day-ahead (DA) forecast errors as the difference in production costs between a case with “realistic” PV (i.e., subhourly solar variability and uncertainty are fully included in the modeling) and a case with “well behaved” PV (i.e., PV is assumed to have no sub-hourly variability and can be perfectly forecasted). In addition, we highlight current practices that allow utilities to compensate for the issues encountered at the sub-hourly time frame with increased levels of PV penetration. In this analysis we use the analytical framework to simulate utility operations with increasing deployment of PV in a case study of Arizona Public Service Company (APS), a utility in the southwestern United States. In our analysis, we focus on three processes that are important in understanding the management of PV variability and uncertainty in power system operations. First, we represent the decisions made the day before the operating day through a DA commitment model that relies on imperfect DA forecasts of load and wind as well as PV generation. Second, we represent the decisions made by schedulers in the operating day through hour-ahead (HA) scheduling. Peaking units can be committed or decommitted in the HA schedules and online units can be redispatched using forecasts that are improved

  8. PV solar electricity: status and future

    Science.gov (United States)

    Hoffmann, Winfried

    2006-04-01

    Within the four main market segments of PV solar electricity there are already three areas competitive today. These are off-grid industrial and rural as well as consumer applications. The overall growth within the past 8 years was almost 40 % p.a. with a "normal" growth of about 18 % p.a. for the first three market segments whereas the grid connected market increased with an astonishing 63 % p.a. The different growth rates catapulted the contribution of grid connected systems in relation to the total market from about one quarter 6 years ago towards more than three quarters today. The reason for this development is basically due to industry-politically induced market support programs in the aforementioned countries. It is quite important to outline under which boundary conditions grid connected systems will be competitive without support programs like the feed in tariff system in Germany, Spain and some more to come in Europe as well as investment subsidies in Japan, US and some other countries. It will be shown that in a more and more liberalized utility market worldwide electricity produced by PV solar electricity systems will be able to compete with their generating cost against peak power prices from utilities. The point of time for this competitiveness is mainly determined by the following facts: 1. Price decrease for PV solar electricity systems leading to an equivalent decrease in the generated cost for PV produced kWh. 2. Development of a truly liberalized electricity market. 3. Degree of irradiation between times of peak power demand and delivery of PV electricity. The first topic is discussed using price experience curves. Some explanations will be given to correlate the qualitative number of 20 % price decrease for doubling cumulative worldwide sales derived from the historic price experience curve with a more quantitative analysis based on our EPIA-Roadmap (productivity increase and ongoing improvements for existing technologies as well as development

  9. PV shading device integrated system in a University Building in Italy

    OpenAIRE

    L.Ceccherini Nelli; F.Cariello; M. Grottke; G.Tondi

    2004-01-01

    PV Enlargement project PV Enlargement" boldly demonstrates Europe’s commitment for improved energy efficiency and cost-effectiveness of PV systems, enhancing the development of large European PV markets. The project can be subdivided into three major fields of activities: Demonstration (1,218 kWp) of highly cost-effective or very innovative PV technologies in 10 European countries for increasing public awareness about and visibility of PV solar electricity Transfer of PV Technol...

  10. Effect of Scarification, Self-Inhibition, and Sowing Depth on Seed Germination of Lupinus campestris Efecto de la Escarificación, Autoinhibición y Profundidad de Siembra sobre la Germinación de Semillas de Lupinus campestris

    Directory of Open Access Journals (Sweden)

    Pedro Gutiérrez Nava

    2010-09-01

    Full Text Available Lupinus campestris Schltdl. & Cham. grows in shallow fields and disturbed areas of Central Mexico. It has potential to improve soil fertility and as fodder. Seeds of L. campestris show dormancy, and the technology needed to increase its potential use requires information about conditions favouring seed germination. The aim of this study was to evaluate the seed germination responseof L. campestris under controlled (laboratory and natural field conditions. Under laboratory conditions, 2 yr old seeds had a maximum germination percentage (50% when they were scarified with sulphuric acid for 90 min prior to sowing and when laboratory light (0.5 µmol m-2 s-1 was maintained during the diurnal period. Without scarification, only about 3% of the seeds germinated. Light in laboratory resulted in an increased seed germination as compared to darkness condition. In the field experiment 1 yr old seeds were used testing the following treatments: (a seed scarification (seeds scarified by 30 min immersion in sulphuric acid vs. not scarified, (b presence or absence of plants of L. campestris in plots before field experiments, and (c sowing depth (on soil surface and at 3 cm deep. The scarified seeds showed a germination percentage range between 50 and 64%, whereas non-scarified seeds had 9 to 16% germination. The seeds sowed in plots with or without plants of L. campestris (before the experiment germinated similarly, indicating no evidence of self-inhibition of germination. Three conclusions come out: (1 Scarification treatment with sulphuric acid effectively breaks dormancy in L. campestris seeds; (2 Direct sowing of scarified seeds (on the soil surface or at 3 cm depth resulted in a range of 50-64% of germination under field conditions; and (3 no evidence was obtained for self-inhibition or a positive interaction between preceding vegetation and seed germination of L. campestris.Lupinus campestris Schltdl. & Cham. crece en campos en descanso y

  11. Self-control system in storage unit of PV plants

    Energy Technology Data Exchange (ETDEWEB)

    Al-Shaban, Saad; Mohmoud, Ali [Hadhramout Univ. of Science and Technology, Faculty of Engineering, Mukalla (Yemen)

    2000-04-01

    A new system for self-controlling of storage batteries being charged by PV plants has been developed. This provides enhanced system reliability, lower system cost, and simpler operation for the user. In this system, the only requirement is to design and select PV panels so that their voltage-sensitive region (on the I-V curve) coincides with that required for a simpler remote PV plant and for long periods. (Author)

  12. Some aspects of implementing grid-connected PV systems

    OpenAIRE

    Franković, Dubravko; ŽIVIĆ ĐUROVIĆ, Marijana; Saldić, Saša

    2011-01-01

    Generation of electric energy from renewable energy sources is a challenge that has to be carefully envisaged since it represents not only a potentially profitable enterprise but also a source of problems for the complex operation of large electric power systems. The paper presents some aspects of grid-connected photovoltaic (PV) systems, especially the determination of solar potential, selection of PV technology and PV system protection. Finally, some aspects of the impacts due to parallel o...

  13. Maximum Power Point Tracking of PV Arrays using Different Techniques

    OpenAIRE

    N.Bhupesh Kumar; Dr. K. Vijaya Kumar Reddy

    2014-01-01

    The increasing demand for electricity and depleting fossil fuels made the solar Photovoltaic (PV) systems to be a better alternative for the future power requirements. The fact that the output of the PV system is dependent upon the solar irradiance and temperature demands a means to maximize the output of the PV system by continuously tracking the maximum power point(MPP) under changing atmospheric conditions. This paper presents the design and implementation of various techni...

  14. Interrogating Protective Space: Shielding, Nurturing and Empowering Dutch Solar PV

    OpenAIRE

    Bram Verhees; Rob Raven; Frank Veraart; Adrian Smith; Florian Kern

    2012-01-01

    This paper reviews the developments of solar photovoltaic technology in the Netherlands. Despite the recent boom in PV industries and deployment around the globe, the Dutch have until now not experienced major growth in the diffusion of PV electricity generation. But this is only part of the story. This paper focuses on the question why PV is still around in the Netherlands despite, at times, harsh policy and socio-economic contexts. It builds upon a recently developed framework from the fiel...

  15. Design of a Solar Tracker System for PV Power Plants

    OpenAIRE

    Tiberiu Tudorache; Liviu Kreindler

    2010-01-01

    This paper deals with the design and execution of a solar tracker systemdedicated to the PV conversion panels. The proposed single axis solar tracker deviceensures the optimization of the conversion of solar energy into electricity by properlyorienting the PV panel in accordance with the real position of the sun. The operation of theexperimental model of the device is based on a DC motor intelligently controlled by adedicated drive unit that moves a mini PV panel according to the signals rece...

  16. PV window - Development and demonstrations. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Haugaard, P.

    2011-05-15

    Using the results from the EU project RenewTransnet, which focused on the development of a pane with integrated solar cells, the goal of this project is to develop these principles into a window solution. This window solution is targeted to Danish building tradition and architecture. It is expected that an elegant PV-window solution for both new and retrofit buildings is developed during this project, and which appearance can be customized to each building. Based on results from a related projects carried out by Gaia Solar, the window solution will have the potential of being approximately 30% cheaper than similar products on the market. In this project this price reduction is the objective of the development of a window solution. The project team has succeeded in developing a 2-layer PV-window with glass / glass lamination with EVA as foil, which is 35% cheaper than similar products on the market. Since the price for the frame-profile does not differ significantly at market level, the price comparison is made on the basis of the developed PV-pane. The objective of 30 % price reduction in relation to similar products on the market is met. A special production process to the making glass/glass lamination with EVA as foil has been developed, in which a frame is put around the module which intends both to remove the unwanted tension along the edges, and to prevent the significant spillage of EVA from the module under pressure and prevent the invasive bubbles along the edge of module. Since the developed production method for making glass/glass modules with EVA is simple, a further cost reduction will primarily be in a reduction of the price of the cell. The project process has resulted in the development of a product, which due to continuous restrictions in the building regulations, will be very attractive in future buildings. (LN)

  17. Solar Energy: Incentives to Promote PV in EU27

    Directory of Open Access Journals (Sweden)

    María del P. Pablo-Romero

    2013-11-01

    Full Text Available The growth in the use of renewable energies in the EU has been remarkable. Among these energies is PV. The average annual growth rate for the EU-27 countries in installed PV capacity in the period 2005-2012 was 41.2%. While the installed capacity of PV has reached almost 82 % of National Renewable Energy Action Plan (NREAP targets for the EU-27 countries for 2020, it is still far from being used at its full potential. Over recent years, several measures have been adopted in the EU to enhance and promote PV. This paper undertakes a complete review of the state of PV power in Europe and the measures taken to date to promote it in EU-27. 25 countries have adopted measures to promote PV. The most widespread measure to promote PV use is Feed- in Tariffs. Tariffs are normally adjusted, in a decreasing manner, annually. Nevertheless, currently, seven countries have decided to accelerate this decrease rate in view of cost reduction of the installations and of higher efficiencies. The second instrument used to promote PV in the EU-27 countries is the concession of subsidies. Nevertheless, subsidies have the disadvantage of being closely linked to budgetary resources and therefore to budgetary constraints. In most EU countries, subsidies for renewable energy for PV are being lowered. Twelve EU-27 countries adopted tax measures. Low-interest loans and green certificate systems were only sparingly used.

  18. Accelerating residential PV expansion: supply analysis for competitive electricity markets

    International Nuclear Information System (INIS)

    Photovoltaic (PV) technology is now sufficiently advanced that market support mechanisms such as net metering plus a renewable portfolio standard (RPS) could induce rapid PV market growth in grid-connected applications. With such support mechanisms, markets would be sufficiently large that manufacturers could profitably build and operate 100 MW p/yr PV module factories, and electricity costs for residential rooftop PV systems would compare favorably with residential electricity prices in certain areas (e.g., California and the greater New York region in the US). This prospect is illustrated by economic and market analyses for one promising technology (amorphous silicon thin-film PV) from the perspectives of both module manufacturers and buyers of new homes with rooftop PV systems. With public policies that reflect the distributed and environmental benefits offered by PV-and that can sustain domestic PV market demand growth at three times the historical growth rate for a period of the order of two decades - PV could provide 3% of total US electricity supply by 2025. (Author)

  19. New financial instruments for PV projects investments

    International Nuclear Information System (INIS)

    The European PV industry is investing heavily in new production facilities. However it is crucial to redouble efforts to overcome the hurdles of the solar electricity market, since only in this way will the sector achieve long-term commercial viability. One of the main objectives will be to work on a series of case studies and identify the project funding mechanisms that would appear to be the most appropriate, with a particular attention paid to the ESCO concept that has already been employed for energy efficiency investments. (authors)

  20. POWERED LED LIGHTING SUPPLIED FROM PV CELLS

    OpenAIRE

    Tirshu M.; Uzun M; Speian A.; Spivac V.; Bogdan A.

    2011-01-01

    The paper deals with practical realization of efficient lighting system based on LED’s of 80W total power mounted on corridor ceiling total length of which is 120m and substitutes existing traditional lighting system consisting of 29 lighting blocks with 4 fluorescent lamps each of them and summary power 2088W. Realized lighting system is supplied from two photovoltaic panels of power 170W. Generated energy by PV cells is accumulated in two accumulators of 75Ah capacity and from battery by me...

  1. Characteristics of laboratory PV/T module

    International Nuclear Information System (INIS)

    The environmental temperature considerably influences the operation mode of silicon photovoltaic elements during the process of electricity generation. Part of solar radiation whose spectrum lies out of the spectral sensitivity of the these elements is usually transformed and dissipated in the space in the form of thermal energy. The purpose of this work is to demonstrate the way of operation and to study experimentally the working parameters of laboratory PV/T module (system), designed to transform and accumulate into useful energy the whole spectrum of the solar radiation

  2. Solar photovoltaic (PV) energy; latest developments in the building integrated and hybrid PV systems

    International Nuclear Information System (INIS)

    Environmental concerns are growing and interest in environmental issues is increasing and the idea of generating electricity with less pollution is becoming more and more attractive. Unlike conventional generation systems, fuel of the solar photovoltaic energy is available at no cost. And solar photovoltaic energy systems generate electricity pollution-free and can easily be installed on the roof of residential as well as on the wall of commercial buildings as grid-connected PV application. In addition to grid-connected rooftop PV systems, solar photovoltaic energy offers a solution for supplying electricity to remote located communities and facilities, those not accessible by electricity companies. The interest in solar photovoltaic energy is growing worldwide. Today, more than 3500MW of photovoltaic systems have been installed all over the world. Since 1970, the PV price has continuously dropped [8]. This price drop has encouraged worldwide application of small-scale residential PV systems. These recent developments have led researchers concerned with the environment to undertake extensive research projects for harnessing renewable energy sources including solar energy. The usage of solar photovoltaic as a source of energy is considered more seriously making future of this technology looks promising. The objective of this contribution is to present the latest developments in the area of solar photovoltaic energy systems. A further objective of this contribution is to discuss the long-term prospect of the solar photovoltaic energy as a sustainable energy supply. [Author

  3. Projecting of PV facades in consideration of PV-specific operating conditions; Besonderheiten bei der Projektierung von Photovoltaik-Fassadenanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Decker, B.; Grimmig, B.; Mencke, D. [Institut fuer Solarenergieforschung GmbH Hameln/Emmerthal (ISFH), Emmerthal (Germany). Gruppe Photovoltaik-Systeme; Stellbogen, D. [Zentrum fuer Sonnenenergie- und Wasserstoff-Forschung Baden-Wuerttemberg (ZSW), Stuttgart (Germany). Fachgebiet Photovoltaische Anlagentechnik

    1998-02-01

    PV facades can provide several additional functions such as weather protection, thermal insulation, daylighting or sun protection. On the other hand, specific operating conditions for PV facades must be taken into account when selecting components and designing the system. Depending on ventilation conditions, there is a large range of maximum module temperatures. South-oriented PV facades receive about 30% less yearly irradiation than an optimally inclined PV generator, hence reflection losses are approximately 4% higher. The maximum of yearly irradiation lies only in the 400-600 W/m{sup 2} range. Surrounding buildings and/or vegetation can impair performance of the PV-facades. For a south-oriented PV facade an annual yield in the range of 470-560 kwh/kW{sub p}.a has been prodicted which was verified by operating results of eight PV facades. (orig.) [Deutsch] Photovoltaik (PV) Fassaden ermoeglichen neben der Stromerzeugung zusaetzliche Funktionen wie Wetterschutz bzw. Waermedaemmung des Gebaeudes oder Tageslichtnutzung bzw. Sonnenschutz der Innenraeume. Allerdings muessen fassadenspezifische Betriebsbedingungen, bei der Komponentenauswahl und Systemauslegung beruecksichtigt werden. Unterschiedliche Hinterlueftungsbedingungen fuehren zu einer grossen Bandbreite der maximalen Modultemperatur. PV-Suedfassaden empfangen etwa 30% weniger Jahreseinstrahlung als ein optimal geneigter PV-Generator. Die Haelfte der jaehrlichen Einstrahlung trifft mit Einfallswinkeln groesser 50 auf die vertikal angeordneten Module wodurch die Reflexionsverluste um ca. 4% hoeher sind. Das Maximum der Jahreseinstrahlung liegt nur um 400-600 W/m{sup 2} und erreicht selten Werte ueber 800 W/m{sup 2}. Umliegende Gebaeude oder Vegetation koennen zu Teilabschattungen des Generators fuehren. Fuer eine vertikale PV-Suedfassade wird ein Jahresenergieertrag in Hoehe von 470-560 kWh/kW{sub p}.a prognostiziert, der anhand der Betriebsergebnisse von acht PV-Fassadenanlagen verifiziert werden konnte

  4. Relative degree of susceptibility and resistance of different brassica campestris l. genotypes against aphid myzus persicae- a field investigation

    International Nuclear Information System (INIS)

    Field evaluation of twenty three Brassica campestris L. genotypes was conducted for aphid (Homoptera: Aphididae) resistance during 2008 crop season. The parameters used to assess tolerance of germplasm lines included pest population during growth season and grain yield at crop maturity. Aphids showed obvious preferences for all of the germplasm investigated; however, the evaluation for resistance to pest identified several genotypes with variable potential for tolerance and sensitivity. Estimated grain yield also varied significantly due to variable pest intensity noted, and seemed to be more appropriately dependent on the pest population conditions at the experimental site. Among the germplasm, the estimation obtained regarding both the parameters sorted out MM-II/02-3 and MM-I285 genotypes as most tolerant due to less pest infestation and damage. Peak infestations by aphid caused severe crop fatalities on S-9-S-97-0.75+75/55 and S-9-1006/95 genotypes, affecting the seed weight and resulting an immense reduction in grain Brassica genotypes appeared to be governed by means of varietals characteristics of diverse germplasms. The result of resistance test conducted under field environment is an effective and consistent approach in the practical selection of crop lines resistant or partially resistant to pests for use in future breeding programs. (author)

  5. Effects of low temperature on the sugar and ascorbic acid contents of komatsuna (Brassica campestris L.) under limited solar radiation

    International Nuclear Information System (INIS)

    The effects of low temperature on the sugar and ascorbic acid contents of Komatsuna (Brassica campestris L.) plants grown under limited solar radiation in the greenhouse were evaluated. Komatsuna plants were grown in a greenhouse in which the mean air temperature was maintained between 13 degree C and 15 degree C (defined as the 'cool temperature' condition). The solar radiation in the greenhouse fluctuated between 2 and 4 MJ/m2. day-l during the experiment. When Komatsuna plants grew to about 20 cm height, they were transferred to a greenhouse in which the mean air temperature fluctuated between 2 degree C and 3 degree C (defined as the 'cold temperature' or 'cold treatment'). The total sugar contents in leaf blades and in petioles of Komatsuna plants increased rapidly as a function of the cold treatment. The total ascorbic acid content in the leaf blades increased rapidly after the initiation of cold treatment, whereas that content in the petioles increased gradually. On the other hand, the composition of the leaf blades and petioles in the Komatsuna plants did not change when grown continuously in the cool plot. The data show that cold treatment promoted the per unit area production of the total sugar and total ascorbic acid. These results indicate that cold treatment could improve the nutritional qualities of Komatsuna plants, even under limited solar radiation in winter,

  6. Varietals resistance and susceptibility in mustard (brassica campestris l.) genotypes against aphid myzus persicae (sulzer) (homoptera: aphididae)

    International Nuclear Information System (INIS)

    The exploitation of resistant cultivars is an imperative, simple, practical and flexible way to cope with insect pests incidence. Thirty genotypes of mustard (Brassica campestris L.) were tested for their resistance and susceptibility to aphid Myzus persicae (Sulzer) exposed under natural field conditions. Data on pest tolerance of genotypes were judged by quantitative traits such as number of aphids on each infested plant and mean dry weight of seeds per genotype. Studies observed the discrepancy in overall rates of pest invasion and seed yield contained by trailed mustard genotypes. Agati sarson (P), S-9-S-97-100/45 and S-9-S-97-100/45 were the least damaged genotypes showing their moderate resistance. Amongst other genotypes, MM-I/01-5, MM-I285 and MM-I/01-6 were the most damaged showing oversensitive response. Although the majority of genotypes were found vulnerable to pest, Agati sarson (P) and S-9-S-97-100/45 due to their lowest hypersensitive response toward aphid contamination and increased pods yield could be used for the development of essential resistance in mustard plant. A marked mode of damage inflicted by aphid on the crop was noticed and the abiotic factors contributing variations in aphid infestation levels during both growing seasons were determined. Knowledge about the host plant resistance investigated can facilitate growers to choose the most appropriate cultivars as pest control strategy. (author)

  7. The effect of hydrodynamic stress on the growth of Xanthomonas campestris cultures in a stirred and sparged tank bioreactor.

    Science.gov (United States)

    Garcia-Ochoa, F; Gomez, E; Alcon, A; Santos, V E

    2013-07-01

    The specific growth and the xanthan production rates by the bacterium Xanthomonas campestris under different shear levels in shake flasks and in a stirred and sparged tank bioreactor have been studied. The shake flask has been used as a reference for studying the shear effects. An effectiveness factor expressed by the ratio of the observed growth rate and the growth rate without oxygen limitation or cell damage was calculated in both modes of cultures. It was observed that the effectiveness factor was strongly dependent on the operational conditions. A strong oxygen transfer limitation at low stirring rates, indicated by a 54 % decrease in the effectiveness factor was observed. In contrast, at higher stirrer speed, cell damage was caused by hydrodynamic stress in the turbulent bulk of the broth, yielding again a decrease in the effectiveness factor values for stirrer speeds higher than 500 rpm. Cell morphological changes were also observed depending on the agitation conditions, differences in morphology being evident at high shear stress. PMID:23010723

  8. Overexpression of a eukaryotic glutathione reductase gene from Brassica campestris improved resistance to oxidative stress in Escherichia coli

    International Nuclear Information System (INIS)

    Glutathione reductase (GR) plays an essential role in a cell's defense against reactive oxygen metabolites by sustaining the reduced status of an important antioxidant glutathione. We constructed a recombinant plasmid based on the expression vector pET-18a that overexpresses a eukaryotic GR from Brassica campestris (BcGR) in Escherichia coli. For comparative analyses, E. coli GR (EcGR) was also subcloned in the same manner. The transformed E. coli with the recombinant constructs accumulated a high level of GR transcripts upon IPTG induction. Also, Western blot analysis showed overproduction of the BcGR protein in a soluble fraction of the transformed E. coli extract. When treated with oxidative stress generating reagents such as paraquat, salicylic acid, and cadmium, the BcGR overproducing E. coli exhibited a higher level of growth and survival rate than the control E. coli strain, but it was not as high as the E. coli strain transformed with the inducible EcGR. The translated amino acid sequences of BcGR and EcGR share 37.3% identity but all the functionally known important residues are conserved. It appears that eukaryotic BcGR functions in a prokaryotic system by providing protection against oxidative damages in E. coli

  9. Genetic Damage Induced by a Food Coloring Dye (Sunset Yellow on Meristematic Cells of Brassica campestris L.

    Directory of Open Access Journals (Sweden)

    Kshama Dwivedi

    2015-01-01

    Full Text Available We have performed the present piece of work to evaluate the effect of synthetic food coloring azo dye (sunset yellow on actively dividing root tip cells of Brassica campestris L. Three doses of azo dye were administered for the treatment of actively dividing root tip cells, namely, 1%, 3%, and 5%, for 6-hour duration along with control. Mitotic analysis clearly revealed the azo dye induced endpoint deviation like reduction in the frequency of normal divisions in a dose dependent manner. Mitotic divisions in the control sets were found to be perfectly normal while dose based reduction in MI was registered in the treated sets. Azo dye has induced several chromosomal aberrations (genotoxic effect at various stages of cell cycle such as stickiness of chromosomes, micronuclei formation, precocious migration of chromosome, unorientation, forward movement of chromosome, laggards, and chromatin bridge. Among all, stickiness of chromosomes was present in the highest frequency followed by partial genome elimination as micronuclei. The present study suggests that extensive use of synthetic dye should be forbidden due to genotoxic and cytotoxic impacts on living cells. Thus, there is an urgent need to assess potential hazardous effects of these dyes on other test systems like human and nonhuman biota for better scrutiny.

  10. The potential market for PV building products

    International Nuclear Information System (INIS)

    This study was carried out by ECOTEC Research and Consulting Limited (ECOTEC) in collaboration with the Newcastle Photovoltaic Application Centre (NPAC) and ECD Energy and Environment (ECD) under the Department of Trade and Industry's (DTI) New and Renewable Energy Programme (contract reference S/P2/00277/00/00). The aim was to assess the future market potential for building-integrated photovoltaic (BIPV) products in terms of current product availability, product development needs, the nature and size of the potential market, and the opportunities for government and the PV supply industry to work together to develop the market. The study itself comprised a review of existing BIPV products, an analysis of the development of the world market for BIPV, a market research survey of building professionals, and meetings of two 'focus groups' drawn from the PV 'supply side' and from buildings professionals. In principle, BIPV products can be used in virtually any type of building, but the main applications are considered to be housing and offices. (author)

  11. Impact of residential PV adoption on Retail Electricity Rates

    International Nuclear Information System (INIS)

    The price of electricity supplied from home rooftop photo voltaic (PV) solar cells has fallen below the retail price of grid electricity in some areas. A number of residential households have an economic incentive to install rooftop PV systems and reduce their purchases of electricity from the grid. A significant portion of the costs incurred by utility companies are fixed costs which must be recovered even as consumption falls. Electricity rates must increase in order for utility companies to recover fixed costs from shrinking sales bases. Increasing rates will, in turn, result in even more economic incentives for customers to adopt rooftop PV. In this paper, we model this feedback between PV adoption and electricity rates and study its impact on future PV penetration and net-metering costs. We find that the most important parameter that determines whether this feedback has an effect is the fraction of customers who adopt PV in any year based solely on the money saved by doing so in that year, independent of the uncertainties of future years. These uncertainties include possible changes in rate structures such as the introduction of connection charges, the possibility of PV prices dropping significantly in the future, possible changes in tax incentives, and confidence in the reliability and maintainability of PV. -- Highlights: •Households who install PV reduce their electricity consumption from the grid. •Electricity rates must increase for utility companies to recover its fixed costs. •However, higher electricity rates give households more incentives to adopt PV. •We find that this feedback has significant impact on PV uptake only in later years. •Utility companies could lose a significant fraction of high consumption customers

  12. The Norwegian PV manufacturing industry in a Triple Helix perspective

    International Nuclear Information System (INIS)

    For the benefit of our common future, policies aimed at the development and promotion of renewable energy technologies should be based on a Triple Helix approach with a sense of technological agency. This view is supported by a case study on the emergence and development of a Norwegian solar photovoltaic manufacturing industry. The data and analyses demonstrate how this new industry was fostered by interactions between existing companies, public R and D funding programmes and research organisations and policy contexts; illustrating a policy-driven technological agency in accordance with a Triple Helix innovation process. During the last decade, a solar PV manufacturing industry has emerged in Norway and gone on to a 10 to 20 per cent share of various segments of world markets for solar PV feedstock, wafers and related components. The present financial crisis has caused an investment slump in solar PV installations, especially in Europe. Therefore, the future prospects for the Norwegian solar PV industry are at risk despite of its focus on innovation and R and D, and its technological agency. Political action is needed: (1) creation of market incentives in near markets for the deployment of solar PV, (2) international cooperation for boosting deployment of solar PV in developing countries. - Highlights: • We examine the emergence of the Norwegian solar PV manufacturing industry. • A policy-driven technological agency was essential for the Norwegian PV industry. The Triple Helix model explains the emergence of the Norwegian PV industry. • Market incentives in near markets are needed for the deployment of solar PV. • International cooperation is needed for boosting solar PV in developing countries

  13. Less CO2 by means of photovoltaic energy (PV)

    International Nuclear Information System (INIS)

    Regarding the title subject special attention is paid to the technical limitations of a fast introduction of the use of photovoltaic (PV) energy conversion. After a brief introduction on PV systems and the operation of a solar cell in chapter two, a state of the art is given of PV technology and possible price developments for PV modules and Balance-Of-System (BOS) components up to the year 2000 in chapters three and four. In chapter five the potential of installing grid-connected PV systems in the Netherlands is determined, taking into account the options of using existing buildings (PV systems on the roof), unexplored ground, in the verge of highways or railroads, industrial areas and airports. In chapter six non-economical bottlenecks for a large-scale introduction of grid-connected PV systems are discussed: the industrial production capacity for PV modules and other components, the fitting-in into the public electricity supply, and institutional aspects of installing PV systems on roofs. In chapter seven it is determined how much costs can be saved and CO2 emission can be reduced when PV capacity is fitted-in into the Dutch electric power supply. The calculations are based on the Global Shift scenario. In chapter eight two scenarios (an optimistic scenario and a more realistic scenario) for the introduction of PV systems are outlined. For both scenarios the financial consequences and the contribution to the electric power supply are indicated. In chapter nine the net energy yield, being the result of the previously discussed introduction scenarios, is calculated, followed by a calculation of the avoided CO2 emission, as well as the costs to avoid such emission. 25 figs., 15 tabs., 116 refs., 1 annex

  14. Step-Stress Accelerated Degradation Testing (SSADT) for Photovoltaic (PV) Devices and Cells (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Lee, J.; Elmore, R.; Suh, C.; Jones, W.

    2010-10-01

    Presentation on step-stress accelerated degradation testing (SSADT) for photovoltaics (PV). Developed are a step-stress degradation test (SSADT) for PV reliability tests and a lifetime prediction model for PV products.

  15. National survey report on PV power applications in Switzerland 2006

    Energy Technology Data Exchange (ETDEWEB)

    Huesser, P. [Nova Energie GmbH, Aarau (Switzerland); Hostettler, T. [Ingenieurbuero Hostettler, Berne (Switzerland)

    2007-07-01

    This annual report was published by the Swiss Federal Office of Energy (SFOE) as part of the International Energy Agency's work on the exchange and dissemination of information on photovoltaic power systems (PVPS). The political situation in Switzerland with regard to the promotion of photovoltaics (PV) and new legislation in the energy area is discussed. The report provides information on installed PV power, costs and prices and the Swiss PV industry. Examples of PV applications are presented and data on the cumulative installed PV power in various application sectors is presented and discussed. Highlights, major projects and various demonstration and field-test programmes are dealt with, as are public budgets for market stimulation. Figures on the development, production and prices of PV cells and modules are presented. Swiss balance-of-system products are reviewed, as are PV-related services and the value of the Swiss PV business. A review of non-technical factors and new initiatives completes the report.

  16. Energy requirements and CO2 mitigation potential of PV systems

    NARCIS (Netherlands)

    Alsema, E.A.

    2006-01-01

    In this paper we investigate the energy requirements of PV modules and systems and calculate the Energy Pay-Back Time for two major PV applications. Based on a review of past energy analysis studies we explain the main sources of differences and establish a "best estimate" for key system components.

  17. MONITOR THE PHOTOVOLTAIC (PV) SYSTEM ON THE NCC ROOFTOP

    Science.gov (United States)

    This study will investigate the pollution emission reduction and demand-side management potential of a100 kW PV system located on the roof of the National Computer Center (NCC). Standardized instrumentation to measure meteorological and PV system performance variables will b...

  18. Robustness analysis of the efficiency in PV inverters

    DEFF Research Database (Denmark)

    Pigazo, Alberto; Liserre, Marco; Blaabjerg, Frede;

    2013-01-01

    During last years an increasing attention has been paid to the efficiency of grid-connected PV inverters. They are manufactured from a number of discrete components and by using a certain topology and control strategy. Hence, the performance of a certain PV inverter not only depends on the select...

  19. Applications of ``PV Optics`` for solar cell and module design

    Energy Technology Data Exchange (ETDEWEB)

    Sopori, B.L.; Madjdpour, J.; Chen, W. [National Renewable Energy Lab., Golden, CO (United States)

    1998-09-01

    This paper describes some applications of a new optics software package, PV Optics, developed for the optical design of solar cells and modules. PV Optics is suitable for the analysis and design of both thick and thin solar cells. It also includes a feature for calculation of metallic losses related to contacts and back reflectors.

  20. Development of PV powered consumer products using future scenarios

    NARCIS (Netherlands)

    Reinders, A.H.M.E.; Meulen, van der B.J.R.; Eger, A.O.

    2006-01-01

    Given the high potential of PV technology to reduce the environmental impact of electricity use of consumer products, it would be worthwhile to advance the application of PV systems in mass produced products. To date this field of application has been explored only to a limited extent. For this reas

  1. PV-DSM: Policy actions to speed commercialization

    International Nuclear Information System (INIS)

    Pacific Gas and Electric Company (PG ampersand E) recently applied Demand-Side Management (DSM) evaluation techniques to photovoltaic (PV) technology to develop the concept of photovoltaics as a Demand-Side Management option (PV-DSM). The analysis demonstrated that PV-DSM has the potential to be economically attractive. Two criticisms in response to that analysis are that the assumptions of 25 year financing and a 25 year evaluation period are unrealistic. This paper responds to those criticisms and documents the mathematical relationships to calculate the value of PV-DSM from a customer's perspective. It demonstrates how regulatory and government agencies could implement policies to resolve both issues and speed PV commercialization

  2. Costs of Residential Solar PV Plants in Distribution Grid Networks

    DEFF Research Database (Denmark)

    Kjær, Søren Bækhøj; Yang, Guangya; Ipsen, Hans Henrik;

    2015-01-01

    In this article we investigate the impact of residential solar PV plants on energy losses in distribution networks and their impact on distribution transformers lifetime. Current guidelines in Denmark states that distribution transformers should not be loaded with more than 67% solar PV power...... to avoid accelerated loss of life. If a solar PV plant causes this limit to be exceeded, the particular owner has to pay for upgrading the transformer. Distribution Network Operators also charge an annual tariff from the solar PV plants to cover the expenses to keep the grid capacity available, the so...... called “Availability Tariff”. According to the Danish Energy Regulatory Authority, the Availability Tariff must cover the exact expenses, with energy savings etc. from the solar PV plants taken into consideration. Our conclusion is that a distribution network, which represents a typical residential...

  3. Optimum Design Of On Grid Pv System Using Tracking System

    Directory of Open Access Journals (Sweden)

    Saeed Mansour

    2015-05-01

    Full Text Available Abstract The fossil fuel is a main issue in the world due to the increase of fossil fuel cost and the depletion of the fossil fuel with continuous increasing demand on electricity. With continuous decrease of PV panels cost it is interesting to consider generation of electricity from PV system. To provide electric energy to a load in a remote area where electric grid utility is not available or connection with grid utility is available there are two approaches of photovoltaic system PV without tracking system Fixed System and PV with tracking systems. The result shows that the energy production by using PV with tracking system generates more energy in comparison with fixed panels system. However the cost per produced KWH is less in case of using fixed panels. This is the backbone in choice between two approaches of photovoltaic system. In this work a system design and cost analysis for two approaches of photovoltaic system are considered.

  4. Fire hazard and other safety concerns of PV systems

    Science.gov (United States)

    Dhere, Neelkanth G.

    2011-09-01

    Photovoltaic modules are usually considered safe and reliable. But in case of grid-connected PV systems that are becoming very popular, the issue of fire safety of PV modules is becoming increasingly important due to the employed high voltages of 600 V to 1000 V. The two main factors i.e. open circuiting of the bypass diode and ground fault that are responsible for the fire in the PV systems have been discussed in detail along with numerous real life examples. Recommendations are provided for preventing the fire hazards such as having at least class C fire rated PV modules, proper bypass and blocking diodes and interestingly, having an ungrounded PV system.

  5. Physical Effects of Distributed PV Generation on California's Distribution System

    CERN Document Server

    Cohen, Michael A

    2015-01-01

    Deployment of high-penetration photovoltaic (PV) power is expected to have a range of effects -- both positive and negative -- on the distribution grid. The magnitude of these effects may vary greatly depending upon feeder topology, climate, PV penetration level, and other factors. In this paper we present a simulation study of eight representative distribution feeders in three California climates at PV penetration levels up to 100\\%, supported by a unique database of distributed PV generation data that enables us to capture the impact of PV variability on feeder voltage and voltage regulating equipment. When comparing the influence of feeder location (i.e. climate) versus feeder type on outcomes, we find that location more strongly influences the incidence of reverse power flow, reductions in peak loading and the presence of voltage excursions. On the other hand, we find that feeder characteristics more strongly influence the magnitude of loss reduction and changes in voltage regulator operations. We find th...

  6. Do feed-in tariffs drive PV cost or viceversa?

    International Nuclear Information System (INIS)

    Highlights: • The distribution of PV installations on the territory is not a function of the solar radiation. • Cost of PV plants were adapted to the FIT framework. • The FIT for PV in Italy was considered an incentive to financial investment. • The FIT for PV in Italy did not stimulate the development of national PV industry. - Abstract: A survey of the PV market in Italy was done studying a number of installations of different sizes whose economic data were known and assessed. The Italian market has experienced a boom in the PV market after the first mechanism of feed-in tariffs was promoted in 2005. The variations of the tariff structure in the following years have caused significant changes in the market structure in terms of average size and technical characteristics of installed plants. However, an Italian PV industry was not stimulated by the incentives and only companies involved in installation and maintenance were created. At the same time, the cost of the PV plants components, design and commissioning have followed quite a particular trend, which is more determined by the tariffs than by the market development and structure. It is quite clear that the costs of PV plants component are not driven by the amount of installations but by the tariffs, with a trend that follows the decreases in the incentives and not the global installed power. It is therefore very important to study the right tariff mechanisms and benefits to avoid financial disturbances on the market and to promote a real competitive market instead of a simple financial operation under a fake façade of green economy

  7. Molecular detection of Xanthomonas oryzae pv. oryzae, Xanthomonas oryzae pv. oryzicola, and Burkholderia glumae in infected rice seeds and leaves

    Science.gov (United States)

    Polymerase chain reaction (PCR) is particularly useful for plant pathogen detection. In the present study, multiplex PCR and SYBR green real-time PCR were developed to facilitate simultaneous detection of three important rice pathogens, Xanthomonas oryzae pv. oryzae, X. oryzae pv. oryzicola, and Bur...

  8. Innovations in Wind and Solar PV Financing

    Energy Technology Data Exchange (ETDEWEB)

    Cory, K.; Coughlin, J.; Jenkin, T.; Pater, J.; Swezey, B.

    2008-02-01

    There is growing national interest in renewable energy development based on the economic, environmental, and security benefits that these resources provide. Historically, greater development of our domestic renewable energy resources has faced a number of hurdles, primarily related to cost, regulation, and financing. With the recent sustained increase in the costs and associated volatility of fossil fuels, the economics of renewable energy technologies have become increasingly attractive to investors, both large and small. As a result, new entrants are investing in renewable energy and new business models are emerging. This study surveys some of the current issues related to wind and solar photovoltaic (PV) energy project financing in the electric power industry, and identifies both barriers to and opportunities for increased investment.

  9. Fidelity Susceptibility as Holographic PV criticality

    CERN Document Server

    Momeni, Davood; Myrzakulov, Ratbay

    2016-01-01

    Motivated by the fact that the quantum entanglement entropy is dual to an area in AdS, quantities dual to a volume in the AdS have also been recently proposed. These include the holographic complexity and fidelity susceptibility of a quantum system. Even though both of them are dual to an volume in the bulk, there are some interesting difference between them. In this letter, we will explicitly compare them for an $ AdS _4$ solution, and clarify the main differences between them from thermodynamic point of the view. We will also obtain the correct and appropriate holographic dual of the thermodynamic volume of AdS blackhole, and demonstrate that to explain therodynamic in extended phase PV picture, from the AdS/CFT point of view,fidelity susceptibility is the preferred quantity in comparison to holographic complexity.

  10. 双孢蘑菇和蘑菇的ITS-RFLP分析%Studies on Agaricus bisporus and Agaricus campestris Using ITS-RFLP

    Institute of Scientific and Technical Information of China (English)

    王波; 刘勇; 赵小青; 王一; 王泽生

    2012-01-01

    对采自四川和西藏的双孢蘑菇(Agaricus bisporus)和蘑菇(A.campestris)9个野生菌株,以及双孢蘑菇5个栽培菌株为材抖,进行了ITS-RFLP分析.结果表明,ITS-PCR条带约为750 bp,5种限制性内切酶(MspⅠ、HinfⅠ、HaeⅡ、AulⅠ、TaqⅠ)的ITS-RFLP分析结果为,只有4种限制性内切酶(HinfⅠ、HaeⅡ、AulⅠ、TaqⅠ)产生多态性条带,但完全能将双孢蘑菇和蘑菇区分的限制性内切酶为TaqⅠ;对5种限制性内切酶的ITS-RFLP分析数据进行聚类结果为,在相似系数为0.615水平以下分为2个类群,并将双孢蘑菇和蘑菇区分开;在相似系数为0.915水平上,供试的11个野生和栽培双孢蘑菇菌株分为3个亚类群.%14 Agaricus strains, including 9 wild strains of Agaricus bisporus or Agaricus campestris and 4 cultivation strains of Agaricus bisporus , were studied by using ITS-RFLP. The results showed that a band with 750 bp from the strains was respectively amplified by the primer combination of ITS4 and ITS5 , and polymorphic bands were obtained after digestive treatments with restriction enzymes of Hinf Ⅰ , Hae Ⅱ , Aul Ⅰ , Taq Ⅰ , but no polymorphic bands produced with Msp Ⅰ, and Agaricus bisporus strains could be distinguished from Agaricus campestris strains only using Taq Ⅰ . The cluster results indicated that strains of Agaricus bisporus and Agaricus campestris could be distinguished and divided into two groups at similarity coefficient of O.615, and the strains of Agaricus bisporus were divided into three subgroups at similarity coefficient of 0.915.

  11. Effects of Different Cadmium Levels on Active Oxygen Metabolism and H2O2-Scavenging System in Brassica campestris L.ssp.chinensis

    Institute of Scientific and Technical Information of China (English)

    SUN Guang-wen; ZHU Zhu-jun; FANG Xue-zhi

    2004-01-01

    The effects of different Cd (Cadmium) levels on generation of active oxygen speceies(AOS) and H2O2-scavenging system in the leaves of Brassica campestris L. ssp. chinensiswere studied. The results showed that O2 generation rate, and H2O2 content were enhancedand malondialdehyde (MDA) content increased with the increase of Cd concentrations inthe growth medium. The activities of ascorbate peroxidase (APX), dehydroascorbatereductase (DR) and glutathione reductase (GR) were promoted by the addition of Cd.Exposed to Cd also increased the contents of ascorbate (ASA) and glutathione (GSH) in theleaves.

  12. Role of nitrification inhibitor DMPP( 3,4-dimethylpyrazole phosphate) in NO3--N accumulation in greengrocery( Brassica campestris L. Ssp. Chinensis )and vegetable soil

    Institute of Scientific and Technical Information of China (English)

    XU Chao; WU Liang-huan; JU Xiao-tang; ZHANG Fu-suo

    2005-01-01

    The influence of nitrification inhibitor(NI) 3,4-dimethylpyrazole phosphate (DMPP) on nitrate accumulation in greengrocery( Brassica campestris L. ssp. chinensis) and vegetable soil at surface layer were investigated in field experiments in 2002 and 2003.Results showed that NI DMPP took no significant effect on yields of edible parts of greengrocery, but it could significantly decrease NO3- -N concentration in greengrccery and in vegetable soil at surface layer. In addition, NI DMPP could reduce the NO3--N concentration during the prophase stage of storage.

  13. Quantification des contraintes nutritionnelles et métaboliques associées à la production de gomme xanthane par Xanthomonas campestris

    OpenAIRE

    Létisse, Fabien

    2000-01-01

    La production industrielle de gomme xanthane, polysaccharide présentant des caractéristiques rhéologiques exceptionnelles, est réalisée en cultures discontinues aérobies de Xanthomonas campestris, Le travail présenté dans cette thèse évalue l'influence des paramètres environnementaux et physiologiques sur la biosynthèse de la gomme dans le cadre d'un procédé industriel. L'analyse macro-cinétique de la production de xanthane sur saccharose montre une phase de croissance rapide s...

  14. Valley of Death analysis for polymer PV technology; Valley of Death analyse voor polymere PV technologie

    Energy Technology Data Exchange (ETDEWEB)

    Schoots, K. [ECN Beleidsstudies, Petten (Netherlands)

    2013-12-15

    This report describes the results of a qualitative study of the barriers that actors involved in the development and commercialization of polymer solar cells, may encounter. The purpose of this socio-economic research is to identify these barriers for the (market) development of thin film polymeric PV technology and to develop strategies for them in order to overcome the constraints. The necessary data are collected from interviews with actors who are active in the development and deployment of conventional solar cells. Based on the results from this study, it is conclude that it is important for the Organic PV industry to carry out many market experiments beyond the built environment. The report provides recommendations with regard to the markets in which these experiments are most likely to succeed and which drivers should be taken into account [Dutch] Dit rapport beschrijft de resultaten van een kwalitatief onderzoek naar de barrieres die actoren, betrokken bij de ontwikkeling en marktintroductie van polymere zonnecellen, kunnen tegenkomen. Het doel van dit sociaal-economische onderzoek is deze barrieres voor de (markt)ontwikkeling van dunne film polymere PV technologie te identificeren en strategieen te ontwikkelen om ze voor te zijn of ze te overbruggen. De benodigde gegevens worden verzameld uit interviews met actoren die actief zijn in de ontwikkeling en uitrol van conventionele zonnecellen. Op basis van de resultaten uit dit onderzoek komen we tot de conclusie dat het voor de Organische PV sector belangrijk is veel marktexperimenten aan te gaan buiten de gebouwde omgeving. Het rapport geeft aanbevelingen in welke soort markten deze experimenten de meeste kans van slagen hebben en met welke drivers van marktpartijen rekening moet worden gehouden.

  15. Caractérisation de polyphénols stilbéniques et de dérivés induits ou constitutifs de la vigne impliqués dans sa défense contre l'agent pathogène du mildiou de la vigne, Plasmopara viticola (Berk. and Curt.)

    OpenAIRE

    Jean-Denis, Julien Bernard; Tabacchi, R

    2006-01-01

    Le Mildiou de la vigne, causé par un oomycète parasite obligatoire, Plasmopara viticola, est une des maladies les plus redoutées par les viticulteurs. Son apparition est occasionnée par des éclaboussures de pluie et de terre sur les tissues de la vigne après les fortes précipitations véhiculant les zoospores infectieuses présentes à la surface du sol. Certaines variétés comme le Chasselas (V. vinifera) sont sensibles au mildiou et laissent P. viticola germer et se développer. D’autres variété...

  16. Impedance characterization of PV modules in outdoor conditions

    DEFF Research Database (Denmark)

    Oprea, Matei-lon; Thorsteinsson, Sune; Spataru, Sergiu;

    2016-01-01

    Impedance spectroscopy (IS) has been used for laboratory characterizations of photovoltaic (PV) technologies under well controlled conditions. This work applies IS for outdoor characterization of PV panels, in order to observe the effect of irradiance (G) and temperature (T) on the PV module......’s impedance spectrum, and further construct an impedance model that can link environmental changes to the model’s parameters. To achieve this, an optimized setup has been developed for long-term impedance spectra monitoring synchronised with accurate irradiance and temperature data. Preliminary results show...... clear correlation between the determined parameters and ambient conditions....

  17. What's stopping a huge expansion of the PV market?

    International Nuclear Information System (INIS)

    Over the past 25 years the terrestrial PV industry has turned into a billion-dollar global business. The necessary technology is available and substantial market growth is continuing. It has often been said that the cost of PV must come down further before the technology really takes off. However the author argues here that the dominant segments of the market are not price-sensitive and that the future explosive expansion of PV markets will need financing on a global basis, assured quality in the products, and the institution of an extensive public-awareness programme of advertising, promotion and education. (author)

  18. Design of a Solar Tracker System for PV Power Plants

    Directory of Open Access Journals (Sweden)

    Tiberiu Tudorache

    2010-04-01

    Full Text Available This paper deals with the design and execution of a solar tracker systemdedicated to the PV conversion panels. The proposed single axis solar tracker deviceensures the optimization of the conversion of solar energy into electricity by properlyorienting the PV panel in accordance with the real position of the sun. The operation of theexperimental model of the device is based on a DC motor intelligently controlled by adedicated drive unit that moves a mini PV panel according to the signals received from twosimple but efficient light sensors. The performance and characteristics of the solar trackerare experimentally analyzed.

  19. Durability Quality Research of Concrete Containing Solar PV Cells

    OpenAIRE

    Chao Sao-Jeng; Cheng An; Hsu Hui-Mi; Chang Jia-Ruey; Teng Li-Wei; Chen Sung-Ching

    2015-01-01

    In this article we demonstrated the study results of durability quality of concrete containing waste solar PV cells. The study used alkali activator to improve the activity of alkali-activated materials in solar PV cells so as to replace Portland cement as binder in concrete. By using sodium hydroxide as an alkali-activator, a high-pH environment is generated to excite the binding characteristics of alkali-activated materials in solar PV cells, and thus develops better durability of the mixes...

  20. PV-Wind Hybrid Systems for Swedish Locations

    OpenAIRE

    Fiedler, Frank; Pazmino, Victor; Berruezo, Irati

    2008-01-01

    PV-Wind-Hybrid systems for stand-alone applications have the potential to be more cost efficient compared to PV-alone systems. The two energy sources can, to some extent, compensate each others minima. The combination of solar and wind should be especially favorable for locations at high latitudes such as Sweden with a very uneven distribution of solar radiation during the year. In this article PV-Wind-Hybrid systems have been studied for 11 locations in Sweden. These systems supply the house...

  1. Design Considerations for Stand-Alone Photovoltaic (PV) Cell Applications

    OpenAIRE

    Mehmet Cebeci; Ahmet Şenpinar

    2013-01-01

    Solar energy is one of the most important renewable energy sources. The photovoltaic (PV) cell systems are used to convert solar energy into electricity. PV systems are divided into two as fixed systems and tracking systems. Fixed systems are mounted at a certain tilt with horizontal to make full use of sunlight. The tilt angle of PV arrays in a fixed system depends on the location and time. If this tilt angle is determined well, the amount of insolation and the energy that is generated incre...

  2. PV Validation and Bankability Workshop: San Jose, California

    Energy Technology Data Exchange (ETDEWEB)

    Granata, J.; Howard, J.

    2011-12-01

    This report is a collaboration between Sandia National Laboratories, the National Renewable Energy Laboratory, and the Florida Solar Energy Center (FSEC). The report provides feedback from the U.S. Department of Energy's (DOE) Solar Program PV Validation and Bankability Workshop in San Jose, California on August 31, 2011. It focuses on the current state of PV in the United States, private funding to fund U.S. PV industry growth, roles and functions of the regional test center program, and ways to improve the current validation and bankability practices.

  3. Control of Single-Stage Single-Phase PV inverter

    DEFF Research Database (Denmark)

    Ciobotaru, Mihai; Teodorescu, Remus; Blaabjerg, Frede

    2005-01-01

    In this paper the issue of control strategies for single-stage photovoltaic (PV) inverter is addressed. Two different current controllers have been implemented and an experimental comparison between them has been made. A complete control structure for the single-phase PV system is also presented....... The main elements of the PV control structure are: - a maximum power point tracker (MPPT) algorithm using the incremental conductance method; - a synchronization method using the phase-locked-loop (PLL), based on delay; - the input power control using the dc voltage controller and power feed...

  4. Recent developments in ASSERT-PV code for subchannel thermalhydraulics

    International Nuclear Information System (INIS)

    This paper summarises recent development of ASSERT-PV, and provides examples of applications to CANDU fuel bundles in predicting flow, heat transfer and sheath temperatures. The development work is intended to improve computational and phenomenological modelling capabilities of ASSERT-PV in simulating various flow scenarios in CANDU fuel bundles. The latest version of ASSERT-PV can be used for simulations of steady state or transient, subchannel thermalhydraulics in CANDU bundles under conditions up to and including post-dryout heat transfer. (author)

  5. Measures for diffusion of solar PV in selected African countries

    DEFF Research Database (Denmark)

    Nygaard, Ivan; Hansen, Ulrich Elmer; Mackenzie, Gordon A.;

    2015-01-01

    from 2010 to 2013. The paper provides a review of three distinct but characteristic trajectories for PV market development in Kenya (private-led market for solar home systems), Morocco (utility-led fee-for service model) and Rwanda (donorled market for institutional systems). The paper finds that...... governments’ strategies to promoting solar PV are moving from isolated projects towards frameworks for market development and that there are high expectations to upgrading in the PV value chain through local assembly of panels and local production of other system elements. Commonly identified measures include...

  6. The sol-ion system. A stationary PV battery system

    Energy Technology Data Exchange (ETDEWEB)

    Schmiegel, A.U.; Knaup, P.; Meissner, A. [voltwerk electronics GmbH, Hamburg (Germany); Jehoulet, C.; Schuh, H. [Saft Batteries, Bordeaux (France); Landau, M.; Braun, M. [Fraunhofer Institut fuer Windenergie und Energiesystemtechnik (IWES), Kassel (Germany); Sauer, D.U.; Magnor, D. [RWTH Aachen (Germany). ISEA; Mohring, H.D. [ZSW, Stuttgart (Germany)

    2010-07-01

    Stationary PV battery systems will play a more important role in future PV applications. They are able to support the grid by providing active and reactive power that can be stored and they can be used to increase the self-consumption of solar energy. The Sol-ion system is a PV battery system that utilises two different approaches for self-consumption - either disconnected from or connected to the grid. Instead of traditional lead-acid batteries, this system uses lithium-ion batteries to store solar power more efficiently. (orig.)

  7. Zwei bemerkenswerte Orobanche-Funde in Mitteldeutschland : Orobanche artemisiae-campestris Vaucher ex Gaudin am Wendelstein bei Nebra (Sachsen-Anhalt) und Orobanche bohemica Čelak. am Spaten bei Hemleben (Thüringen)

    OpenAIRE

    Pusch, Jürgen

    2014-01-01

    Es werden zwei bemerkenswerte Orobanche-Funde in Mitteldeutschland vorgestellt. Zum einen wird über einen Fund der in Sachsen-Anhalt seit Jahrzehnten verschollen geglaubten Panzer-Sommerwurz (Orobanche artemisiae-campestris) bei Wendelstein und zum anderen über einen weiteren Thüringer Nachweis der Böhmischen Sommerwurz (Orobanche bohemica) bei Hemleben berichtet.

  8. A system for optimization working parameters of PV-modules and PV-generators at high environmental temperature

    International Nuclear Information System (INIS)

    Installing PV-modules and PV generators in some cases suffers from the lack of possibilities for choosing suitable platforms for situating them due to various architectural and constructive limitations. Therefore these modules and generators are often mounted on dark surfaces. As a consequence, their working temperature rises, which leads to lowing their coefficient of efficiency. This paper suggests a system for automatic temperature control and regulation for PV-modules and generators, which aims at optimization of their operation and efficiency. There are some experimental results shown in the paper, illustrating the efficiency of the system. (author)

  9. Photovoltaic (PV) contribution to the primary frequency control

    International Nuclear Information System (INIS)

    Photovoltaic (PV) technology is among the most efficient and cost effective renewable energy kinds currently available on the market. The connection of a large number of PVs to the grid may influence the frequency and voltage stability of the power system. This paper proposes load-frequency control technique for system with high penetration of photovoltaic (PV). The proposed controller has been successfully implemented and tested using PSCAD/EMTDC. In this study, the impact of photovoltaic (PV) on frequency stability of the system is studies in detail. This study shows that large penetration of photovoltaic (PV) with load and frequency control has a significant impact on the stability and security level of electrical network.(author)

  10. Design Considerations for Stand-Alone Photovoltaic (PV Cell Applications

    Directory of Open Access Journals (Sweden)

    Mehmet Cebeci

    2013-06-01

    Full Text Available Solar energy is one of the most important renewable energy sources. The photovoltaic (PV cell systems are used to convert solar energy into electricity. PV systems are divided into two as fixed systems and tracking systems. Fixed systems are mounted at a certain tilt with horizontal to make full use of sunlight. The tilt angle of PV arrays in a fixed system depends on the location and time. If this tilt angle is determined well, the amount of insolation and the energy that is generated increases. When a stand-alone PV cell system is being chosen, certain design operations should be implemented. The number of modules and batteries needed for any system should be calculated by means of the amount of load, insolation level, module characteristics, etc. The design of system is finalized according to the energy demand.

  11. PV GRID Advisory Paper. Consultation version: key recommendations

    Energy Technology Data Exchange (ETDEWEB)

    Barth, Bianca; Concas, Giorgia; Cossent, Rafael; Franz, Oliver; Frias, Pablo; Hermes, Roland; Lama, Riccardo; Loew, Holger; Mateo, Carlos; Rekinger, Manoel; Sonvilla, Paolo Michele; Vandenbergh, Michel

    2014-01-15

    PV GRID is a transnational collaborative effort under the umbrella of the Intelligent Energy Europe programme. The main project goal is to enhance photovoltaic (PV) hosting capacity in distribution grids while overcoming regulatory and normative barriers hampering the application of available technical solutions. The European PV GRID advisory paper aims at providing an overview of the issues and barriers that need to be addressed in order to enhance the distribution grid hosting capacity for PV and other distributed generation (DG).To this purpose, barriers are classified as either cross-cutting challenges or specific barriers, depending on whether they have an overarching, system-wide character or rather focus on one single issue such as curtailment, self-consumption or storage. Finally, a set of preliminary recommendations on how to overcome these issues is presented, allowing for the implementation of the identified technical solutions.

  12. Races and hosts of Pseudomonas syringae pv. tomato in Serbia

    Directory of Open Access Journals (Sweden)

    Milijašević Svetlana

    2009-01-01

    Full Text Available During the past few years, frequent appearance of bacterial speck of tomatoes was recorded in several tomato-growing regions in Serbia. A three-year survey of tomato fields in Serbia (2002-2004 resulted in the isolation of numerous bacterial strains, with 30 representative strains selected for further analyses. Based on the results of pathogenicity, biochemical, and physiological tests, all strains isolated from diseased tomato plants were identified as P. syringae pv. tomato. The identity of strains was confirmed by the polymerase chain reaction (PCR, since PCR products of expected size (650 bp specific for coronatine-producing strains of P. syringae pv. tomato were amplified from all tested strains. Study of the host range of P. syringae pv. tomato strains originating from Serbia confirmed tomato as the sole host. The reaction of tomato differential cultivar Ontario 7710 showed that the Serbian strains belonged to races 0 and 1 of P. syringae pv. tomato.

  13. New test and characterization methods for PV modules and cells

    Energy Technology Data Exchange (ETDEWEB)

    Van Aken, B.; Sommeling, P. [ECN Solar Energy, Petten (Netherlands); Scholten, H. [Solland, Heerlen (Netherlands); Muller, J. [Moser-Baer, Eindhoven (Netherlands); Grossiord, N. [Holst Centre, Eindhoven (Netherlands); Smits, C.; Blanco Mantecon, M. [Holland Innovative, Eindhoven (Netherlands); Verheijen, M.; Van Berkum, J. [Philips Innovation Services, Eindhoven (Netherlands)

    2012-08-15

    The results of the project geZONd (shared facility for solar module analysis and reliability testing) are described. The project was set up by Philips, ECN, Holst, Solland, OM and T and Holland Innovative. The partners have shared most of their testing and analysis equipment for PV modules and cells, and together developed new or improved methods (including the necessary application know-how). This enables faster and more efficient innovation projects for each partner, and via commercial exploitation for other interested parties. The project has concentrated on five failure modes: corrosion, delamination, moisture ingress, UV irradiation, and mechanical bending. Test samples represented all main PV technologies: wafer based PV and rigid and flexible thin-film PV. Breakthroughs are in very early detection of corrosion, in quantitative characterization of adhesion, in-situ detection of humidity and oxygen inside modules, and ultra-fast screening of materials on UV stability.

  14. Full Steam Ahead for PV in US Homes?

    Energy Technology Data Exchange (ETDEWEB)

    Bolinger, Mark A; Barbose, Galen; Wiser, Ryan

    2009-01-15

    In October 2008, the United States Congress extended both the residential and commercial solar investment tax credits (ITCs) for an unprecedented eight years, lifted the $2,000 cap on the residential credit, removed the prohibition on utility use of the commercial credit, and eliminated restrictions on the use of both credits in conjunction with the Alternative Minimum Tax. These significant changes, which apply to systems placed in service on or after January 1, 2009, will increase the value of the solar credits for residential system owners in particular, and are likely--in conjunction with state, local, and utility rebate programs targeting solar--to spur significant growth in residential, commercial, and utility-scale photovoltaic (PV) installations in the years ahead. This article focuses specifically on the residential credit, describing three areas in which removal of the $2,000 cap on the residential ITC will have significant implications for PV rebate program administrators, PV system owners, and the PV industry.

  15. The Ramakrishna Mission economic PV development initiative

    Energy Technology Data Exchange (ETDEWEB)

    Stone, J.L.; Ullal, H.S. [National Renewable Energy Lab., Golden, CO (United States); Sherring, C. [Sherring Energy Associates, Princeton, NJ (United States)

    1998-09-01

    India is the world`s second most populous country, quickly approaching one billion persons. Although it has a well-developed electricity grid, many of the people have little or no access to electricity and all of the benefits associated with it. There are areas that are isolated from the grid and will not be connected for many years, if ever. One such area is the Sundarbans located in the delta region of the two great rivers, the Ganges and Brahmaputra, partially in India and partially in Bangladesh. It is estimated that 1.5 million people live in this area, crisscrossed by many islands and rivers, who have only marginal supplies of electricity generated primarily from diesel generators and batteries. Working with the regional non-governmental organization (NGO), the Ramakrishna Mission, and the West Bengal Renewable Energy Development Agency, the governments of India and the US initiated a rural electrification initiative to demonstrate the economic and technical feasibility of photovoltaics to provide limited supplies of electricity for such applications as solar home lighting systems (SHS), water pumping, vaccine refrigeration, communications, and economic development activities. This paper details initial results from approximately 30 kilowatts of PV systems installed in the area, including socio-economic impacts and technical performance.

  16. Electrification of rural areas by solar PV

    International Nuclear Information System (INIS)

    More than 2000 million people, mostly in developing countries, live in rural areas without access to grid connected power. Conventional approaches to supplying power, whether through extension of existing grids or through stand-alone 'mini-grids' based on diesel generator sets, or even on renewable energy minigrids, require large investments which are unlikely to receive priority in competition with more economically and politically attractive investments in urban areas. Domestic PV lighting and broadcast reception kits (DLKs), comprising, typically, a 30-60 W panel, an automotive battery, a charge indicator, and dc fluorescent lamps can be furnished and installed for about $500. DLKs are now used in the Dominican Republic, Kenya, Sri Lanka and many other countries. DLKs provide a minimum essential service with low overheads. Given the necessary credit facilities, they can give better service at comparable costs in comparison with kerosene lamps and dry cell powered radios. They also permit a substantial degree of local manufacture, thus saving on foreign exchange. This movement is starting in many countries on a purely commercial basis. The process could be greatly accelerated if 'seed money' in the form of revolving funds could be made available. (author). 1 fig., 11 tabs

  17. Performance parameters of a standalone PV plant

    International Nuclear Information System (INIS)

    Highlights: • We described in details a photovoltaic power plant installed in the remote rural village Elkaria (Essaouira Morocco – 7.2 kWp). • We presented the results of monitoring and some performance parameters of the plant such as load curve. • We discussed the energy management of the plant which is based on the droop mode control. • We presented and discussed the yields and the performance ratio of the plant. - Abstract: In this work we present a detailed description of a 7.2 kWp photovoltaic power plant installed in the remote rural village Elkaria (province of Essaouira in Morocco). This plant supplies 16 households with electricity through a local grid that was installed for this purpose. The results of monitoring some performance parameters of the plant such as load curve, the yields and the performance ratio are presented and discussed. The performance ratio of the PV plant varied between 33% and 70.2%. The low values of this parameter are mainly attributed to the way the battery inverter manages the energy flow

  18. Promotional drivers for grid-connected PV

    Energy Technology Data Exchange (ETDEWEB)

    Lopez Polo, A.; Hass, R.; Suna, D.

    2009-03-15

    This report for the International Energy Agency (IEA) made by Task 10 of the Photovoltaic Power Systems (PVPS) programme takes a look at promotional measures for grid-connected photovoltaic systems. The mission of the Photovoltaic Power Systems Programme is to enhance the international collaboration efforts which accelerate the development and deployment of photovoltaic solar energy. The objective of Task 10 is stated as being to enhance the opportunities for wide-scale, solution-oriented application of photovoltaics in the urban environment. The paper discusses the core objective of this study which was to analyse the success of various governmental regulatory programs and governmental and non-governmental marketing programs for grid-connected PV systems. To meet this objective, a review of the most important past and current programs around the world was conducted. The theoretical bases of supply and demand are explained and the types of existing strategies are documented in a second Section. In Chapter 3, various programs around the world are described. Chapter 4 focuses on defining success criteria which will be used for the analysis of the programs. Finally, the major conclusions drawn complete this analysis.

  19. Evaluation of PV Module Field Performance

    Energy Technology Data Exchange (ETDEWEB)

    Wohlgemuth, John; Silverman, Timothy; Miller, David C.; McNutt, Peter; Kempe, Michael; Deceglie, Michael

    2015-06-14

    This paper describes an effort to inspect and evaluate PV modules in order to determine what failure or degradation modes are occurring in field installations. This paper will report on the results of six site visits, including the Sacramento Municipal Utility District (SMUD) Hedge Array, Tucson Electric Power (TEP) Springerville, Central Florida Utility, Florida Solar Energy Center (FSEC), the TEP Solar Test Yard, and University of Toledo installations. The effort here makes use of a recently developed field inspection data collection protocol, and the results were input into a corresponding database. The results of this work have also been used to develop a draft of the IEC standard for climate and application specific accelerated stress testing beyond module qualification. TEP Solar Test Yard, and University of Toledo installations. The effort here makes use of a recently developed field inspection data collection protocol, and the results were input into a corresponding database. The results of this work have also been used to develop a draft of the IEC standard for climate and application specific accelerated stress testing beyond module qualification. TEP Solar Test Yard, and University of Toledo installations. The effort here makes use of a recently developed field inspection data collection protocol, and the results were input into a corresponding database. The results of this work have also been used to develop a draft of the IEC standard for climate and application specific accelerated stress testing beyond module qualification.

  20. Trends in building integrated PV: results from the IEA PV Power Systems Programme

    International Nuclear Information System (INIS)

    This paper reviews trends in the market for BIPV systems. The market for BIPV systems is expanding rapidly and is being promoted by demonstration and market incentive programmes being undertaken in various countries. The rate of expansion of the market is quantified and trends in the technology are discussed. The paper draws on work undertaken by the author as one of the UK representatives to Task 7 of the IEA PV Power Systems Programme and as technical writer for the International Survey Report produced by Task 1. (author)

  1. PV and gas turbine system for peak-demand applications

    International Nuclear Information System (INIS)

    A computer simulation model of the behavior of a photovoltaic (PV) gas turbine hybrid system with compressed air storage is developed in order to evaluate its performance and predict the total energy-conversion efficiency and the incurred costs under various operating conditions. This integrated PV and gas turbine hybrid plant produces approximately 140% more power per unit of energy consumed compared with conventional gas turbine plants. In addition lower rates of pollutant emissions to the atmosphere are achieved.(Author)

  2. Microgrid-Ready Solar PV; NREL (National Renewable Energy Laboratory)

    Energy Technology Data Exchange (ETDEWEB)

    None

    2015-07-01

    Designing new solar projects to be 'microgrid-ready' enables the U.S. DoD, other federal agencies, and the private sector to plan future microgrid initiatives to utilize solar PV as a generating resource. This fact sheet provides background information with suggested language for several up-front considerations that can be added to a solar project procurement or request for proposal (RFP) that will help ensure that PV systems are built for future microgrid connection.

  3. Design and Implementation of A PV Powered Tri-Cycle

    OpenAIRE

    Soumya Das; Pradip K Sadhu; Suprava Chakraborty; Saumen Dhara; Shramabati Sen

    2016-01-01

    Solar PV technology is one of the first among the various renewable energy technologies that have been adopted and accepted universally in order to meet the basic needs of generation of electricity. The objective of this paper is to propose a tri-cycle that utilises the application of stand-alone photovoltaic (PV) system. A preliminary design and construction of a solar tri-cycle has been performed by evaluating and estimating the required panel size, battery capacity and motor power. Calcul...

  4. Developing solar: PV solar system markets in Africa

    International Nuclear Information System (INIS)

    Governments, NGO's and UN organisations are increasingly convinced that renewable energies not only help to solve energy problems in Africa but are indispensable in alleviating regional disparities, social problems and bridging the digital gap. Still, many years after introducing high efficiency solar PV systems the necessary breakthrough of implementing them on a mass scale is still not a reality. The author provides perspectives on developing solar PV in Africa. (Author)

  5. Design of fibre reinforced PV concepts for building integrated applications

    OpenAIRE

    Reinders, A.H.M.E.; Wit, de, S.; Boer

    2009-01-01

    Fibre reinforced polymers present an interesting encapsulation medium for PV-modules. Glass fibres can provide increased strength and stiffness to thin polymer layers overcoming the brittleness and limited deformability of glass-panes. Glass fibre reinforced polymers allows for transparency over a broad range of the solar spectrum while the material properties and integral production processes create possibilities for novel product concepts with embedded PV technology. To explore such possibi...

  6. Thermal Evaluation of a Solarus PV-T collector

    OpenAIRE

    Haddi, Jihad

    2013-01-01

    Low concentrator PV-T hybrid systems produce both electricity and thermal energy; this fact increases the overall efficiency of the system and reduces the cost of solar electricity. These systems use concentrators which are optical devices that concentrate sunlight on to solar cells and reduce expensive solar cell area. This thesis work deals with the thermal evaluation of a PV-T collector from Solarus.Firstly the thermal efficiency of the low concentrator collector was characterized for the ...

  7. System analysis of a PV/T hybrid solar window

    OpenAIRE

    Davidsson, Henrik

    2010-01-01

    A building-integrated multifunctional PV/T solar window was suggested and developed by Andreas Fieber. The solar window is constructed of PV cells laminated on solar absorbers placed in a window behind the glazing. To reduce the costs of solar electricity, tiltable reflectors have been introduced in the construction to focus radiation onto the solar cells. The reflectors make it possible to control the amount of radiation transmitted into the building. The insulated reflectors also reduce the...

  8. P-V Criticality of Modified BTZ Black Hole

    Science.gov (United States)

    Sadeghi, J.; Kubeka, A. S.

    2016-05-01

    In this paper, we investigate the BTZ black hole in P-V critical point of view. As we know, the BTZ black hole does not have P-V critical behavior. So in this case, we introduce some anstaz that give us the modified BTZ black hole. Finally, we show that this modified BTZ black hole is satisfied by the equation of state of Liquid-gas phase transition.

  9. Control and operation of SMES and SMES/PV systems

    OpenAIRE

    Foreman, Mark McKinney

    1992-01-01

    Applications, converter topologies, and control schemes are examined for superconductive magnetic energy storage (SMES) systems. Diurnal load leveling for electric utilities and compensation for fluctuations in photovoltaic (PV) power generation are the primary applications discussed. It is demonstrated that a SMES system implemented with standard AC/DC converters offers energy storage capacity large enough, and dynamic response fast enough, to compensate for PV fluctuat...

  10. Economic and policy analysis for solar PV systems in Indiana

    International Nuclear Information System (INIS)

    In recent years, the energy market in the US and globally is expanding the production of renewable energy. Solar energy for electricity is also expanding in the US. Indiana is one of the states expanding solar energy with solar photovoltaic (PV) systems. Therefore, we conduct benefit cost analysis with several uncertain input variables to determine the economics of adopting solar PV systems in Indiana based on policy instruments that could increase adoption of solar PV systems. The specific objectives are analyses of the cost distribution of solar PV systems compared with grid electricity in homes and estimating the probability that solar can be cheaper than electricity from grids under different policy combinations. We first do the analysis under current policy and then the analysis under potential policy options for a variety of scenarios. Also, the results inform government policy makers on how effective the alternative policies for encouraging solar PV systems are. The results show that current policies are important in reducing the cost of solar PV systems. However, with current policies, there is only 50–50 chance of solar being cheaper than electricity from grids. If potential policies are implemented, solar PV systems can be more economical than grid electricity. - Highlights: • We investigate the economics of solar PV systems based on policy instruments. • We do scenario analyses under different combinations of policies. • We examine the probability of solar being cheaper than grid electricity for each scenario. • With current policies, there is 50–50 chance of solar being cheaper than the grid. • With depreciation and carbon tax, solar is much more economical than the grid

  11. Real Time Photovoltaic Array Simulator for Testing Grid-Connected PV Inverters

    DEFF Research Database (Denmark)

    Sera, Dezso; Valentini, Massimo; Raducu, Alin

    2008-01-01

    In this paper a real time flexible PV array simulator is presented. It is a system that can simulate different PV panel arrays in specific environmental conditions. To evaluate performance of the Maximum Power Point Tracking (MPPT) of grid-connected Photovoltaic (PV) inverters only measurements u...... undertaken with an appropriate PV array simulator provide accurate and reproducible results. Thus the PV array simulator has been developed and implemented. MPPT efficiency tests on a commercial grid-connected PV inverter have been performed to validate the PV array simulator....

  12. PV Derived Data for Predicting Performance; NREL (National Renewable Energy Laboratory)

    Energy Technology Data Exchange (ETDEWEB)

    Marion, Bill

    2015-09-14

    A method is described for providing solar irradiance data for modeling PV performance by using measured PV performance data and back-solving for the unknown direct normal irradiance (DNI) and diffuse horizontal irradiance (DHI), which can then be used to model the performance of PV systems of any size, PV array tilt, or PV array azimuth orientation. Ideally situated for using the performance data from PV modules with micro-inverters, the PV module operating current is used to determine the global tilted irradiance (GTI), and a separation model is then used to determine the DNI and DHI from the GTI.

  13. Review of PV Inverter Technology Cost and Performance Projections

    Energy Technology Data Exchange (ETDEWEB)

    Navigant Consulting Inc.

    2006-01-01

    The National Renewable Energy Laboratory (NREL) has a major responsibility in the implementation of the U.S. Department of Energy's (DOE's) Solar Energy Technologies Program. Sandia National Laboratories (SNL) has a major role in supporting inverter development, characterization, standards, certifications, and verifications. The Solar Energy Technologies Program recently published a Multiyear Technical Plan, which establishes a goal of reducing the Levelized Energy Cost (LEC) for photovoltaic (PV) systems to $0.06/kWh by 2020. The Multiyear Technical Plan estimates that, in order to meet the PV system goal, PV inverter prices will need to decline to $0.25-0.30 Wp by 2020. DOE determined the need to conduct a rigorous review of the PV Program's technical and economic targets, including the target set for PV inverters. NREL requested that Navigant Consulting Inc.(NCI) conduct a review of historical and projected cost and performance improvements for PV inverters, including identification of critical barriers identified and the approaches government might use to address them.

  14. Energy metrics analysis of hybrid - photovoltaic (PV) modules

    Energy Technology Data Exchange (ETDEWEB)

    Tiwari, Arvind [Department of Electronics and Communication, Krishna Institute of Engineering and Technology, 13 k.m. stone, Ghaziabad - Meerut Road, Ghaziabad 201 206, UP (India); Barnwal, P.; Sandhu, G.S.; Sodha, M.S. [Centre for Energy Studies, Indian Institute of Technology Delhi, Hauz Khas, New Delhi 110 016 (India)

    2009-12-15

    In this paper, energy metrics (energy pay back time, electricity production factor and life cycle conversion efficiency) of hybrid photovoltaic (PV) modules have been analyzed and presented for the composite climate of New Delhi, India. For this purpose, it is necessary to calculate (1) the energy consumption in making different components of the PV modules and (2) the annual energy (electrical and thermal) available from the hybrid-PV modules. A set of mathematical relations have been reformulated for computation of the energy metrics. The manufacturing energy, material production energy, energy use and distribution energy of the system have been taken into account, to determine the embodied energy for the hybrid-PV modules. The embodied energy and annual energy outputs have been used for evaluation of the energy metrics. For hybrid PV module, it has been observed that the EPBT gets significantly reduced by taking into account the increase in annual energy availability of the thermal energy in addition to the electrical energy. The values of EPF and LCCE of hybrid PV module become higher as expected. (author)

  15. Training and certification of PV installers in Europe

    International Nuclear Information System (INIS)

    The European strategy for the coming decades sets specific targets for a sustainable growth, including reaching a 20% share of renewables in final energy consumption till 2020. To achieve this target, a number of initiatives and measures have been in force. Europe, is currently the largest market for PV systems with more than 75% of the annual worldwide installations in 2011. The favourable European policies as well as the Member States’ supporting legislations have resulted in high market growth for photovoltaics. Applying PV technologies however, requires high qualified technicians to install, repair and maintain them. Until today, national markets have been growing faster than the skilled PV installers force can satisfy. The PVTRIN, an Intelligent Energy Europe action, addresses these issues by developing a training and certification scheme for technicians active in the installation and maintenance of small scale PV systems. During the implementation of the action, a market research was conducted in the six participating countries in order to record the stakeholders’ attitudes, perceptions and considerations and to adapt the training methods, tools and materials to the national PV industry requirements and markets’ needs. Indicative results of this analysis as well as the current situation regarding relevant training and certification schemes are presented in this paper. - Highlights: ► Market research in six EU countries on PV professional Training and Certification needs. ► PVTRIN scheme integrates the national legislations and the market's needs. ► The different aspects (technical, institutional, financial) are presented

  16. Performance evaluation of stand alone hybrid PV-wind generator

    Science.gov (United States)

    Nasir, M. N. M.; Saharuddin, N. Z.; Sulaima, M. F.; Jali, Mohd Hafiz; Bukhari, W. M.; Bohari, Z. H.; Yahaya, M. S.

    2015-05-01

    This paper presents the performance evaluation of standalone hybrid system on Photovoltaic (PV)-Wind generator at Faculty of Electrical Engineering (FKE), UTeM. The hybrid PV-Wind in UTeM system is combining wind turbine system with the solar system and the energy capacity of this hybrid system can generate up to charge the battery and supply the LED street lighting load. The purpose of this project is to evaluate the performance of PV-Wind hybrid generator. Solar radiation meter has been used to measure the solar radiation and anemometer has been used to measure the wind speed. The effectiveness of the PV-Wind system is based on the various data that has been collected and compared between them. The result shows that hybrid system has greater reliability. Based on the solar result, the correlation coefficient shows strong relationship between the two variables of radiation and current. The reading output current followed by fluctuate of solar radiation. However, the correlation coefficient is shows moderate relationship between the two variables of wind speed and voltage. Hence, the wind turbine system in FKE show does not operate consistently to produce energy source for this hybrid system compare to PV system. When the wind system does not fully operate due to inconsistent energy source, the other system which is PV will operate and supply the load for equilibrate the extra load demand.

  17. Performance evaluation of stand alone hybrid PV-wind generator

    International Nuclear Information System (INIS)

    This paper presents the performance evaluation of standalone hybrid system on Photovoltaic (PV)-Wind generator at Faculty of Electrical Engineering (FKE), UTeM. The hybrid PV-Wind in UTeM system is combining wind turbine system with the solar system and the energy capacity of this hybrid system can generate up to charge the battery and supply the LED street lighting load. The purpose of this project is to evaluate the performance of PV-Wind hybrid generator. Solar radiation meter has been used to measure the solar radiation and anemometer has been used to measure the wind speed. The effectiveness of the PV-Wind system is based on the various data that has been collected and compared between them. The result shows that hybrid system has greater reliability. Based on the solar result, the correlation coefficient shows strong relationship between the two variables of radiation and current. The reading output current followed by fluctuate of solar radiation. However, the correlation coefficient is shows moderate relationship between the two variables of wind speed and voltage. Hence, the wind turbine system in FKE show does not operate consistently to produce energy source for this hybrid system compare to PV system. When the wind system does not fully operate due to inconsistent energy source, the other system which is PV will operate and supply the load for equilibrate the extra load demand

  18. Review of Artificial Abrasion Test Methods for PV Module Technology

    Energy Technology Data Exchange (ETDEWEB)

    Miller, David C. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Muller, Matt T. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Simpson, Lin J. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-08-01

    This review is intended to identify the method or methods--and the basic details of those methods--that might be used to develop an artificial abrasion test. Methods used in the PV literature were compared with their closest implementation in existing standards. Also, meetings of the International PV Quality Assurance Task Force Task Group 12-3 (TG12-3, which is concerned with coated glass) were used to identify established test methods. Feedback from the group, which included many of the authors from the PV literature, included insights not explored within the literature itself. The combined experience and examples from the literature are intended to provide an assessment of the present industry practices and an informed path forward. Recommendations toward artificial abrasion test methods are then identified based on the experiences in the literature and feedback from the PV community. The review here is strictly focused on abrasion. Assessment methods, including optical performance (e.g., transmittance or reflectance), surface energy, and verification of chemical composition were not examined. Methods of artificially soiling PV modules or other specimens were not examined. The weathering of artificial or naturally soiled specimens (which may ultimately include combined temperature and humidity, thermal cycling and ultraviolet light) were also not examined. A sense of the purpose or application of an abrasion test method within the PV industry should, however, be evident from the literature.

  19. Performance evaluation of stand alone hybrid PV-wind generator

    Energy Technology Data Exchange (ETDEWEB)

    Nasir, M. N. M.; Saharuddin, N. Z.; Sulaima, M. F.; Jali, Mohd Hafiz; Bukhari, W. M.; Bohari, Z. H. [Faculty of Electrical Engineering, Universiti Teknikal Malaysia Melaka (UTeM), Hang Tuah Jaya, 76100 Melaka (Malaysia); Yahaya, M. S. [Faculty of Engineering Technology, Universiti Teknikal Malaysia Melaka (UTeM), Hang Tuah Jaya, 76100 Melaka (Malaysia)

    2015-05-15

    This paper presents the performance evaluation of standalone hybrid system on Photovoltaic (PV)-Wind generator at Faculty of Electrical Engineering (FKE), UTeM. The hybrid PV-Wind in UTeM system is combining wind turbine system with the solar system and the energy capacity of this hybrid system can generate up to charge the battery and supply the LED street lighting load. The purpose of this project is to evaluate the performance of PV-Wind hybrid generator. Solar radiation meter has been used to measure the solar radiation and anemometer has been used to measure the wind speed. The effectiveness of the PV-Wind system is based on the various data that has been collected and compared between them. The result shows that hybrid system has greater reliability. Based on the solar result, the correlation coefficient shows strong relationship between the two variables of radiation and current. The reading output current followed by fluctuate of solar radiation. However, the correlation coefficient is shows moderate relationship between the two variables of wind speed and voltage. Hence, the wind turbine system in FKE show does not operate consistently to produce energy source for this hybrid system compare to PV system. When the wind system does not fully operate due to inconsistent energy source, the other system which is PV will operate and supply the load for equilibrate the extra load demand.

  20. Examples of successful architectural integration of PV: Germany

    International Nuclear Information System (INIS)

    In Germany building-integrated photovoltaics (BIPV) are developing rapidly, and much progress has been achieved in the past five years. BIPV can be used today in different ways on both existing and new buildings. Architects and designers are discovering BIPV. With the help of custom-made products available on the German market they are beginning to explore the technical limits of an aesthetic and structural integration of PV in buildings. As a result some exciting high-profile building projects with PV have been built, for example, the small service pavilion Meereslauschen in Steinhude or the new headquarters building of the Wood Trade Association in Munich. These projects show that the use of PV is very varied and offers opportunities for creative architects. However non-technical problems still need to be solved to allow a meaningful and widespread application of PV in the built environment. To decrease costs it is essential to develop further standard BIPV components. The aim of such developments should be to replace standard PV modules by products in which PV and structural building elements are melded into one design and structural unit. (author)

  1. Battery Energy Storage System for PV Output Power Leveling

    Directory of Open Access Journals (Sweden)

    Rajkiran Singh

    2014-01-01

    Full Text Available Fluctuating photovoltaic (PV output power reduces the reliability in power system when there is a massive penetration of PV generators. Energy storage systems that are connected to the PV generators using bidirectional isolated dc-dc converter can be utilized for compensating the fluctuating PV power. This paper presents a grid connected energy storage system based on a 2 kW full-bridge bidirectional isolated dc-dc converter and a PWM converter for PV output power leveling. This paper proposes two controllers: a current controller using the d-q synchronous reference and a phase-shift controller. The main function of the current controller is to regulate the voltage at the high-side dc, so that the voltage ratio of the high-voltage side (HVS with low-voltage side (LVS is equal to the transformer turns ratio. The phase-shift controller is employed to manage the charging and discharging modes of the battery based on PV output power and battery voltage. With the proposed system, unity power factor and efficient active power injection are achieved. The feasibility of the proposed control system is investigated using PSCAD simulation.

  2. Continuing Developments in PV Risk Management: Strategies, Solutions, and Implications

    Energy Technology Data Exchange (ETDEWEB)

    Lowder, T.; Mendelsohn, M.; Speer, B.; Hill, R.

    2013-02-01

    As the PV industry matures, successful risk management practices will become more imperative to ensure investor confidence, control costs, and facilitate further growth. This report discusses several key aspects of risk management during the commercial- and utility-scale project life cycle, from identification of risks, to the process of mitigating and allocating those risks among project parties, to transferring those risks through insurance. The report also explores novel techniques in PV risk management, options to offload risks onto the capital markets, and innovative insurance policies (namely warranty policies) that address risks unique to the PV sector. One of the major justifications for robust risk management in the PV industry is the cost-reduction opportunities it affords. If the PV industry can demonstrate the capability to successfully manage its risks, thereby inspiring confidence in financiers, it may be able to obtain a lower cost of capital in future transactions. A lower cost of capital translates to a lower cost of energy, which will in turn enhance PV?s competitiveness at a time when it will have to rely less on subsidies to support its market penetration.

  3. Residential Solar PV Systems in the Carolinas: Opportunities and Outcomes.

    Science.gov (United States)

    Alqahtani, Bandar Jubran; Holt, Kyra Moore; Patiño-Echeverri, Dalia; Pratson, Lincoln

    2016-02-16

    This paper presents a first-order analysis of the feasibility and technical, environmental, and economic effects of large levels of solar photovoltaic (PV) penetration within the services areas of the Duke Energy Carolinas (DEC) and Duke Energy Progress (DEP). A PV production model based on household density and a gridded hourly global horizontal irradiance data set simulates hourly PV power output from roof-top installations, while a unit commitment and real-time economic dispatch (UC-ED) model simulates hourly system operations. We find that the large generating capacity of base-load nuclear power plants (NPPs) without ramping capability in the region limits PV integration levels to 5.3% (6510 MW) of 2015 generation. Enabling ramping capability for NPPs would raise the limit of PV penetration to near 9% of electricity generated. If the planned retirement of coal-fired power plants together with new installations and upgrades of natural gas and nuclear plants materialize in 2025, and if NPPs operate flexibly, then the share of coal-fired electricity will be reduced from 37% to 22%. A 9% penetration of electricity from PV would further reduce the share of coal-fired electricity by 4-6% resulting in a system-wide CO2 emissions rate of 0.33 to 0.40 tons/MWh and associated abatement costs of 225-415 (2015$ per ton). PMID:26745347

  4. Determination of Heavy Metal and Radioactivity in Agaricus campestris Mushroom Collected from Kahramanmaraş and Erzurum Proviences

    Directory of Open Access Journals (Sweden)

    Aysenur Yilmaz

    2016-03-01

    Full Text Available In this study, radioactivity and heavy metals accumulations in Agaricus campestris mushroom collected from Kahramanmaraş and Erzurum provinces was determined. HPGe gamma detector was used for the determination of radioactivity concentrations. Heavy metal content was measured using a ICP-MS. As radioactive element; natural (238U, 232Th 40K and artificial radionuclide (137Cs concentrations were determined. The values of the committed effective dose were calculated. Same measurements were made in soils. Absorbed dose and excess lifetime cancer risk were calculated. Amount of Mg, Al, Ca, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Cd, Pb206, Pb207 and Pb208 as heavy metals of mushrooms were determined. 238U, 232Th, 40K activity concentrations of mushroom collected from Erzurum was determined as 12.1 ± 0.8, 11.7 ± 0.9, 497.7 ± 17.8 Bq/kg, respectively and 137Cs was not detected by system. 232Th and 40K activity concentrations of mushroom collected from Kahramanmaraş was determined as 13.4 ± 0.5, 134.9 ± 6.3 Bq/kg, respectively, 238U and 137Cs was not detected by system similarly. The value of the committed effective dose collected from Erzurum and Kahramanmaraş were calculated as 75 and 29 μSv respectively and these values were found lower than 290 μSv accepted as world average. Absorbed dose and risk of lifetime cancer for Erzurum was determined as 37.39 nGy/h, 16.5 x 10-5; absorbed dose and excess lifetime cancer risk for Kahramanmaraş was determined as 30.92 nGy/h, 13.3 x 10-5 respectively. Amount of daily intake for each heavy metal was calculated. Radionuclide activity concentrations and accumulations of heavy metal were not founded threaten level to healthy, except from arsenic As (0.025 and 0.039 mg/kg in mushroom collected from both provinces. They were found a bit higher than upper limit (0.015 mg/kg in report which is prepared World Health Organization (WHO and Food and Agriculture Organization of the United Nations (FAO jointly.

  5. Influence of Applying Pig Manure on Arsenic Content of Soil and Brassica campestris%施用猪粪对土壤和菜心砷含量的影响

    Institute of Scientific and Technical Information of China (English)

    彭来真; 刘琳琳; 吕清瑶; 李延

    2011-01-01

    采用盆栽试验的方法,研究施用猪粪对土壤和菜心砷含量的影响.结果表明,随猪粪施用量的增加,土壤全砷、有效态砷和菜心砷含量均提高,且均与猪粪施用量呈极显著的正相关.施用猪粪的同一处理相比较,第2茬土壤全砷、有效态砷和菜心砷含量均高于第1茬.相关分析表明,施用猪粪导致土壤有效态砷含量提高是菜心砷含量增加的主要原因,土壤有效态砷含量可以作为衡量猪粪安全施用的指标.%Pot experiment was conducted to study the influence of applying pig manure on arsenic content of soil and Brassica campestris. The results showed that the content of total, available arsenic in soil and in Brassica campestris increased with pig manure dose raised from 5 g/kg to 60 g/kg. There existed positively significant correlation between the content of total, available arsenic in soil, arsenic in Brassica campestris and pig manure dose. The content of total, available arsenic in soil and in Brassica campestris of second harvest were higher than those of the previous harvest. Statistics analysis showed the uptake coefficient of extractable arsenic content in soil was higher than that of soil total arsenic content, indicating that the increasing of extractable arsenic content in soil coursed by application of pig dung made the increasing of the arsenic content in Brassica campestris. Soil extractable arsenic content could be used as safety index of pig manure application.

  6. A Software Tool for Optimal Sizing of PV Systems in Malaysia

    OpenAIRE

    K. Sopian; Azah Mohamed; Tamer Khatib

    2012-01-01

    This paper presents a MATLAB based user friendly software tool called as PV.MY for optimal sizing of photovoltaic (PV) systems. The software has the capabilities of predicting the metrological variables such as solar energy, ambient temperature and wind speed using artificial neural network (ANN), optimizes the PV module/ array tilt angle, optimizes the inverter size and calculate optimal capacities of PV array, battery, wind turbine and diesel generator in hybrid PV systems. The ANN based mo...

  7. Modelling of grid connected geographically dispersed PV systems for power system studies

    OpenAIRE

    Ramachandran, Jayaraman

    2005-01-01

    ABSTRACT The growth of the photovoltaic market indicates that in the near future PV electricity generation may rise to a significant power source. As the proportion of electric power generated from PV systems becomes significant, the effect of these sources on transmission and distribution networks must be considered. This research work has investigated suitable representations of the PV resource and the output power of dispersed PV systems to study the effects of large-scale deployment of PV...

  8. Effect of the Fluctuations of PV Production and Electricity Demand on the PV Electricity Self-Consumption

    OpenAIRE

    Wyrsch, Nicolas; Riesen, Yannick; Ballif, Christophe

    2013-01-01

    The electricity self-consumption level of a family household is determined both experimentally and by modelling. The effect of rapid fluctuation in PV production and electricity demand, and especially the effect of the temporal resolution of their measurements, are studied. For accurate determination of the self-consumption level, temporal resolution of at least 30 s for the load profile and at least 10 min for the PV production measurements are suggested. The effect of temporal resolution be...

  9. Proposal of Xanthomonas translucens pv. pistaciae pv. nov., pathogenic to pistachio (Pistacia vera).

    Science.gov (United States)

    Giblot-Ducray, Danièle; Marefat, Alireza; Gillings, Michael R; Parkinson, Neil M; Bowman, John P; Ophel-Keller, Kathy; Taylor, Cathy; Facelli, Evelina; Scott, Eileen S

    2009-12-01

    Strains of Xanthomonas translucens have caused dieback in the Australian pistachio industry for the last 15 years. Such pathogenicity to a dicotyledonous woody host contrasts with that of other pathovars of X. translucens, which are characterized by their pathogenicity to monocotyledonous plant families. Further investigations, using DNA-DNA hybridization, gyrB gene sequencing and integron screening, were conducted to confirm the taxonomic status of the X. translucens pathogenic to pistachio. DNA-DNA hybridization provided a clear classification, at the species level, of the pistachio pathogen as a X. translucens. In the gyrB-based phylogeny, strains of the pistachio pathogen clustered among the X. translucens pathovars as two distinct lineages. Integron screening revealed that the cassette arrays of strains of the pistachio pathogen were different from those of other Xanthomonas species, and again distinguished two groups. Together with previously reported pathogenicity data, these results confirm that the pistachio pathogen is a new pathovar of X. translucens and allow hypotheses about its origin. The proposed name is Xanthomonas translucens pv. pistaciae pv. nov. PMID:19748753

  10. Rhizosphere competent Mesorhizobiumloti MP6 induces root hair curling, inhibits Sclerotinia sclerotiorum and enhances growth of Indian mustard (Brassica campestris Mesorhizobium loti MP6 rizosférico competente induz encurvamento do pelo daraiz, inibe Sclerotinia sclerotiorum e estimula o crescimento de mostarda indiana (Brassica campestris

    Directory of Open Access Journals (Sweden)

    Shikha Chandra

    2007-03-01

    Full Text Available The bacterial strain Mesorhizobium loti MP6, isolated from root nodules of Mimosa pudica induced growth and yield of Brassica campestris. The isolate MP6 secreted hydroxamate type siderophore in Chrom-Azurol Siderophore (CAS agar medium. Production of hydrocyanic acid (HCN, indole acetic acid (IAA and phosphate solubilizing ability was also recorded under normal growth conditions. Root hair curling was observed through simple glass-slide technique. In vitro study showed a significant increase in population of M. loti MP6 in rhizosphere due to root exudates of B. campestris. In dual culture technique the strain showed a strong antagonistic effect against Sclerotinia sclerotiorum, a white rot pathogen of Brassica campestris. The growth of S. sclerotiorum was inhibited by 75% after prolonged incubation. Efficient root colonization of mustard seedlings was confirmed by using a streptomycin-resistant marker M. loti MP6strep+. The M. loti MP6 coated seeds proved enhanced seed germination, early vegetative growth and grain yield as compared to control. Also, a drastic decline (99% in the incidence of white rot was observed due to application of M. loti MP6.A cepa bacteriana Mesorhizobium loti MP6 isolada de nódulos de raiz de Mimosa pudica induziu o crescimento e o rendimento de Brassica campestris. A cepa MP6 secretou sideróforo do tipo hidroxamato em meio sólido Chrom-Azurol Siderophore (CAS. Em condições normais de crescimento, a cepa foi também capaz de produzir de ácido cianídrico (HCN e acido indolacético (AIA e solubilizar fosfato. O encurvamento do pelo da raiz foi observado usando a simples técnica de lâmina e lamínula. Estudos in vitro mostraram um aumento significativo na população de M. loti MP6 na rizosfera devido aos exsudatos de B. campestris. Empregando-se técnica de co-cultura, a cepa mostrou um grande efeito antagônico contra o fungo Sclerotinia sclerotiorum, o patógeno da podridão branca de Brassica campestris. Ap

  11. Large scale PV plants - also in Denmark. Project report

    Energy Technology Data Exchange (ETDEWEB)

    Ahm, P. (PA Energy, Malling (Denmark)); Vedde, J. (SiCon. Silicon and PV consulting, Birkeroed (Denmark))

    2011-04-15

    Large scale PV (LPV) plants, plants with a capacity of more than 200 kW, has since 2007 constituted an increasing share of the global PV installations. In 2009 large scale PV plants with cumulative power more that 1,3 GWp were connected to the grid. The necessary design data for LPV plants in Denmark are available or can be found, although irradiance data could be improved. There seems to be very few institutional barriers for LPV projects, but as so far no real LPV projects have been processed, these findings have to be regarded as preliminary. The fast growing number of very large scale solar thermal plants for district heating applications supports these findings. It has further been investigated, how to optimize the lay-out of LPV plants. Under the Danish irradiance conditions with several winter months with very low solar height PV installations on flat surfaces will have to balance the requirements of physical space - and cost, and the loss of electricity production due to shadowing effects. The potential for LPV plants in Denmark are found in three main categories: PV installations on flat roof of large commercial buildings, PV installations on other large scale infrastructure such as noise barriers and ground mounted PV installations. The technical potential for all three categories is found to be significant and in the range of 50 - 250 km2. In terms of energy harvest PV plants will under Danish conditions exhibit an overall efficiency of about 10 % in conversion of the energy content of the light compared to about 0,3 % for biomass. The theoretical ground area needed to produce the present annual electricity consumption of Denmark at 33-35 TWh is about 300 km2 The Danish grid codes and the electricity safety regulations mention very little about PV and nothing about LPV plants. It is expected that LPV plants will be treated similarly to big wind turbines. A number of LPV plant scenarios have been investigated in detail based on real commercial offers and

  12. The prospects for cost competitive solar PV power

    International Nuclear Information System (INIS)

    New solar Photovoltaic (PV) installations have grown globally at a rapid pace in recent years. We provide a comprehensive assessment of the cost competitiveness of this electric power source. Based on data available for the second half of 2011, we conclude that utility-scale PV installations are not yet cost competitive with fossil fuel power plants. In contrast, commercial-scale installations have already attained cost parity in the sense that the generating cost of power from solar PV is comparable to the retail electricity prices that commercial users pay, at least in certain parts of the U.S. This conclusion is shown to depend crucially on both the current federal tax subsidies for solar power and an ideal geographic location for the solar installation. Projecting recent industry trends into the future, we estimate that utility-scale solar PV facilities are on track to become cost competitive by the end of this decade. Furthermore, commercial-scale installations could reach “grid parity” in about ten years, if the current federal tax incentives for solar power were to expire at that point. - Highlights: ► Assessment of the cost competitiveness of new solar Photovoltaic (PV) installations. ► Utility-scale PV installations are not yet cost competitive with fossil fuel power plants. ► Commercial-scale installations have already attained cost parity in certain parts of the U.S. ► Utility-scale solar PV facilities are on track to become cost competitive by the end of this decade

  13. Investigation of bias radiation effect on PV cell measurement

    Science.gov (United States)

    Huang, Xuebo; Quan, Chenggen; Chan, Joanne; Ng, Patrick

    2013-06-01

    Photovoltaic (PV) cells are photo-electrical devices that convert light energy directly into electricity through the photovoltaic effect. PV cell assemblies are used to make solar modules employed in a variety of ways ranging from space applications to domestic energy consumption. Characterisation and performance testing of PV cells are critical to the development of PV technologies and growth of the solar industry. As new solar products are being developed, its energy conversion efficiency and other critical parameters must be accurately measured and tested against globally recognised metrological standards. The differential spectral responsivity (DSR) measurement is one of the primary methods for calibrating reference PV cells. This is done by calculating its spectral responsivities through measuring the AC short-circuit current produced by a PV cell under a modulated monochromatic radiation and different levels of steady-state broadband bias light radiation. It is observed that different types of bias light source will produce different signal-to-noise levels and significantly influence measurement accuracy. This paper aims to investigate the noise sources caused by different types of bias light sources (e.g. xenon arc and tungsten-halogen lamps) and the relevant measurement uncertainties so as to propose a guideline for selection of bias light source which can improve the signal-to-noise level and measurement uncertainty. The DSRs of the PV cells are measured using a commercial DSR measurement system under different levels of bias radiation from 0 to 1 kWm-2. The data analysis and uncertainty evaluation are presented in this paper using experimental data and mathematical tools.

  14. Policies and opportunities for grid parity of PV in the Netherlands

    Energy Technology Data Exchange (ETDEWEB)

    Lako, P.; Beurskens, L.W.M. [ECN Policy Studies, Petten (Netherlands)

    2012-01-15

    In 2010, ECN Policy Studies has provided information on the development of solar PV in the Netherlands to GlobalData, India. Based on this information request, the present note on policies and opportunities for grid parity of PV has been drafted. Recently, subsidies for solar PV in the Netherlands have shown a pattern of a roller-coaster that is typical for PV financing in a number of EU countries. Stop-and-go policies for solar PV may have multiple causes. It may be difficult to determine the right feed-in tariffs for PV; or governments may be reluctant to provide sufficient funding for a relatively expensive renewable electricity source like PV. This note sheds light on the current state of affairs and policies for PV in the Netherlands, and on several private initiatives aimed at reaching grid parity for PV which is installed by households.

  15. NCBI nr-aa BLAST: CBRC-GGAL-15-0007 [SEVENS

    Lifescience Database Archive (English)

    Full Text Available CBRC-GGAL-15-0007 ref|YP_362914.1| putative secreted protein [Xanthomonas campestri...s pv. vesicatoria str. 85-10] emb|CAJ22814.1| putative secreted protein [Xanthomonas campestris pv. vesicatoria str. 85-10] YP_362914.1 1.1 37% ...

  16. Durability Quality Research of Concrete Containing Solar PV Cells

    Directory of Open Access Journals (Sweden)

    Chao Sao-Jeng

    2015-01-01

    Full Text Available In this article we demonstrated the study results of durability quality of concrete containing waste solar PV cells. The study used alkali activator to improve the activity of alkali-activated materials in solar PV cells so as to replace Portland cement as binder in concrete. By using sodium hydroxide as an alkali-activator, a high-pH environment is generated to excite the binding characteristics of alkali-activated materials in solar PV cells, and thus develops better durability of the mixes. The conclusions were made on effect of this cement replacement. As a result, we identified the durability for those of 16 concrete specimens predefined and made to consider various possible control factors. The conclusions also depicted that all experiments but the drying shrinkage may be helpful with the suitable use of control factors as far as concerning the recycled solar PV cells for mixing in concrete. In other words, the durability quality of concrete may be partially unacceptable of containing solar PV cells.

  17. Design procedures of hybrid PV/SMES system

    International Nuclear Information System (INIS)

    This paper presents accurate procedures to determine the design parameters of an autonomous hybrid PV/SMES system. Integrating Superconductive magnetic energy storage as a recent storage technology with photovoltaic power system enhances the PV output utilization during the solar radiation fluctuations period. this is because of SMES fast response to any PV output fluctuation. The load demand is supplied either from PV plant or through SMES or from both. Imposed to the technical and economical constrains, the optimum solar cells area and the proper capacity and rating of SMES system are assessed. Regarding solar radiation profile, clear and cloudy days are accurately considered for investigation. Three indices are suggested to express the cloudy and fluctuations conditions. These indices represent the non-utilized PV energy due to clouds (x), fluctuation period (Tf) and location of fluctuations period(tst). The incremental changes in the design parameters are computed for any variation in these indices. Differentiation between the role of BS and SMES in affecting the results is determined and quantitatively analyzed. The results of clear day condition with SMES are the bas quantities for these changes. Complete analysis of the most effective parameters is presented. Eventually, mathematical models are deduced for each parameter which assists in predicting its behavior against the independent variable.(Author)

  18. Geographic smoothing of solar PV: results from Gujarat

    Science.gov (United States)

    Klima, Kelly; Apt, Jay

    2015-10-01

    We examine the potential for geographic smoothing of solar photovoltaic (PV) electricity generation using 13 months of observed power production from utility-scale plants in Gujarat, India. To our knowledge, this is the first published analysis of geographic smoothing of solar PV using actual generation data at high time resolution from utility-scale solar PV plants. We use geographic correlation and Fourier transform estimates of the power spectral density (PSD) to characterize the observed variability of operating solar PV plants as a function of time scale. Most plants show a spectrum that is linear in the log-log domain at high frequencies f, ranging from {f}-1.23 to {f}-1.56 (slopes of -1.23 and -1.56), thus exhibiting more relative variability at high frequencies than exhibited by wind plants. PSDs for large PV plants have a steeper slope than those for small plants, hence more smoothing at short time scales. Interconnecting 20 Gujarat plants yields a {f}-1.66 spectrum, reducing fluctuations at frequencies corresponding to 6 h and 1 h by 23% and 45%, respectively. Half of this smoothing can be obtained through connecting 4-5 plants; reaching marginal improvement of 1% per added plant occurs at 12-14 plants. The largest plant (322 MW) showed an {f}-1.76 spectrum. This suggests that in Gujarat the potential for smoothing is limited to that obtained by one large plant.

  19. Estimation of PV energy production based on satellite data

    Science.gov (United States)

    Mazurek, G.

    2015-09-01

    Photovoltaic (PV) technology is an attractive source of power for systems without connection to power grid. Because of seasonal variations of solar radiation, design of such a power system requires careful analysis in order to provide required reliability. In this paper we present results of three-year measurements of experimental PV system located in Poland and based on polycrystalline silicon module. Irradiation values calculated from results of ground measurements have been compared with data from solar radiation databases employ calculations from of satellite observations. Good convergence level of both data sources has been shown, especially during summer. When satellite data from the same time period is available, yearly and monthly production of PV energy can be calculated with 2% and 5% accuracy, respectively. However, monthly production during winter seems to be overestimated, especially in January. Results of this work may be helpful in forecasting performance of similar PV systems in Central Europe and allow to make more precise forecasts of PV system performance than based only on tables with long time averaged values.

  20. Recent Advances in PV Research and Future Directions

    Science.gov (United States)

    Deb, Satyen K.

    1998-04-01

    The photovoltaic technology is making a major thrust in the commercial arena with 1997 worldwide production of PV modules reaching over 125 MW and growing at the rate of 20-25semiconductor materials and devices are emerging as strong contenders for PV applications even though silicon is still the 'work-horse' of the industry. Ultra-high efficiency solar cells fabricated from gallium arsenide (GaAs) and its ternary alloys like gallium indium phosphide (GaInP2) are finding applications in space technology. Enormous progress has also been made on various thin-film solar cell technologies, which offer the promise for substantially reducing the cost of PV systems. Some of the leading contenders are amorphous and polycrystalline silicon, compound semiconductor thin films such as copper indium diselenide (CuInSe2) based alloys, and cadmium telluride (CdTe) thin films. Exciting new developments are happening in the use of nano-particle semiconductor materials like titanium dioxide (TiO2) for low-cost PV devices. Intense research on these and other materials and devices is making a strong impact on the technology. In this presentation, a brief overview of recent advances in PV research will b e made and the trends and opportunities for future research directions will be identified.

  1. Solar cell junction temperature measurement of PV module

    KAUST Repository

    Huang, B.J.

    2011-02-01

    The present study develops a simple non-destructive method to measure the solar cell junction temperature of PV module. The PV module was put in the environmental chamber with precise temperature control to keep the solar PV module as well as the cell junction in thermal equilibrium with the chamber. The open-circuit voltage of PV module Voc is then measured using a short pulse of solar irradiation provided by a solar simulator. Repeating the measurements at different environment temperature (40-80°C) and solar irradiation S (200-1000W/m2), the correlation between the open-circuit voltage Voc, the junction temperature Tj, and solar irradiation S is derived.The fundamental correlation of the PV module is utilized for on-site monitoring of solar cell junction temperature using the measured Voc and S at a short time instant with open circuit. The junction temperature Tj is then determined using the measured S and Voc through the fundamental correlation. The outdoor test results show that the junction temperature measured using the present method, Tjo, is more accurate. The maximum error using the average surface temperature Tave as the junction temperature is 4.8 °C underestimation; while the maximum error using the present method is 1.3 °C underestimation. © 2010 Elsevier Ltd.

  2. Modelling of flow and heat transfer in PV cooling channels

    Energy Technology Data Exchange (ETDEWEB)

    Diarra, D.C.; Harrison, S.J. [Queen' s Univ., Kingston, ON (Canada). Dept. of Mechanical and Materials Engineering Solar Calorimetry Lab; Akuffo, F.O. [Kwame Nkrumah Univ. of Science and Technology, Kumasi (Ghana). Dept. of Mechanical Engineering

    2005-07-01

    Under sunny conditions, the temperature of photovoltaic (PV) modules can be 20 to 30 degrees C above the ambient air temperature. This affects the performance of PV modules, particularly in regions with hot climates. For silicon solar cells, the maximum power decreases between 0.4 and 0.5 per cent for every degree C of temperature increase above a reference value. In an effort to address this issue, this experimental and numerical study examined an active PV panel evaporative cooling scheme that is typically used in hot arid climates. The cooling system circulated cool air behind the PV modules, extracting heat and lowering solar cell temperature. A fluid dynamic and thermal model of the combined system was developed using the EES program in order to study the configuration of the cooling channel and the characteristics of the cooling flow. Heat transfer and flow characteristics in the cooling channel were then calculated along with pressure drop and fan power associated with the air-circulation. The net power output was also calculated. The objective was to design a cost efficient cooling system and to optimize its flow and pressure drop in order to maximize power output. The study demonstrated how the performance of the PV panel is influenced by the geometry of the cooling channel, the inlet air temperature and the air flow rate. 2 refs.

  3. Modelling PV modules' performance in Sahelian climates

    Energy Technology Data Exchange (ETDEWEB)

    Diarra, D.C.; Akuffo, F.O. [Kwame Nkrumah Univ. of Science and Technology, Kumasi (Ghana). Dept. of Mechanical Engineering

    2003-08-01

    This paper describes the development of a thermo-optical model designed to evaluate the temperature of a photovoltaic (PV) module in an effort to design a cost-effective cooling system for PV modules operating under high ambient temperatures. The power output of a PV module is greatly reduced when its temperature rises. This loss in efficiency is particularly significant in Sahelian regions where PV modules are subjected to high solar radiation intensities and high ambient temperatures. The newly developed thermo-optical model confirms that most of the heat in a PV module is generated in the solar cell. The results of the analysis include: the optical absorption, reflection and transmission of the solar radiation incident on the module; the temperature distribution in the module; and, the heat transfer through the top and bottom of the module. At incidence angles of 60 degrees, approximately three-quarters of the heat is generated in the solar cell. The optical efficiency is 88.44 per cent at normal incidence angle and 82.48 per cent when the incidence angle is 60 degrees. It was determined that the cooling system should be located as close as possible to the solar cell in order to increase the thermal heat flow from the cell. 4 refs., 3 tabs., 4 figs.

  4. Thermal modelling of PV module performance under high ambient temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Diarra, D.C.; Harrison, S.J. [Queen' s Univ., Kingston, ON (Canada). Dept. of Mechanical and Materials Engineering Solar Calorimetry Lab; Akuffo, F.O. [Kwame Nkrumah Univ. of Science and Technology, Kumasi (Ghana). Dept. of Mechanical Engineering

    2005-07-01

    When predicting the performance of photovoltaic (PV) generators, the actual performance is typically lower than test results conducted under standard test conditions because the radiant energy absorbed in the module under normal operation raises the temperature of the cell and other multilayer components. The increase in temperature translates to a lower conversion efficiency of the solar cells. In order to address these discrepancies, a thermal model of a characteristic PV module was developed to assess and predict its performance under real field-conditions. The PV module consisted of monocrystalline silicon cells in EVA between a glass cover and a tedlar backing sheet. The EES program was used to compute the equilibrium temperature profile in the PV module. It was shown that heat is dissipated towards the bottom and the top of the module, and that its temperature can be much higher than the ambient temperature. Modelling results indicate that 70-75 per cent of the absorbed solar radiation is dissipated from the solar cells as heat, while 4.7 per cent of the solar energy is absorbed in the glass cover and the EVA. It was also shown that the operating temperature of the PV module decreases with increased wind speed. 2 refs.

  5. Design of direct solar PV driven air conditioner

    KAUST Repository

    Huang, Bin-Juine

    2015-12-05

    © 2015 Elsevier Ltd. Solar air conditioning system directly driven by stand-alone solar PV is studied. The air conditioning system will suffer from loss of power if the solar PV power generation is not high enough. It requires a proper system design to match the power consumption of air conditioning system with a proper PV size. Six solar air conditioners with different sizes of PV panel and air conditioners were built and tested outdoors to experimentally investigate the running probabilities of air conditioning at various solar irradiations. It is shown that the instantaneous operation probability (OPB) and the runtime fraction (RF) of the air conditioner are mainly affected by the design parameter rpL (ratio of maximum PV power to load power). The measured OPB is found to be greater than 0.98 at instantaneous solar irradiation IT > 600 W m-2 if rpL > 1.71 RF approaches 1.0 (the air conditioner is run in 100% with solar power) at daily-total solar radiation higher than 13 MJ m-2 day-1, if rpL > 3.

  6. Effect of 60Co γ irradiation with seed and shoot-tip of Brassica campestris L. var on its culture in vitro

    International Nuclear Information System (INIS)

    The survival rate in vitro of shoot-tips of Brassica campestris L. var from seeds irradiated by 60Co γ-rays decreased with the increase of dose. Irradiation inhibited proliferation of shoot-tip, induction of callus from cotyledons and differentiation of the callus. The age of explant contributed to the effect of irradiation in the culture. Irradiation stimulated the proliferation of shoot-tip with dose less than 50 Gy. Based on the effect of irradiation in the tissue culture, the effective dose recommended was about 200 Gy for seeds, 50-100 Gy for pre-soaked germinating seeds and 40-70 Gy for shoot-tips in vitro, respectively

  7. Nitrogen Dioxide-Induced Responses in Brassica campestris Seedlings: The Role of Hydrogen Peroxide in the Modulation of Antioxidative Level and Induced Resistance

    Institute of Scientific and Technical Information of China (English)

    MA Chun-yan; XU Xin; HAO Lin; CAO Jun

    2007-01-01

    This article investigates the responses of Brassica campestris seedlings to an acute level of nitrogen dioxide (NO2) exposure in a plant growth chamber, and examines whether pretreating plants with hydrogen peroxide (H2O2) will alleviate NO2-caused injury. Twenty-eight-day-old B. campestris plants sprayed with 10 mmol L-1 H2O2 aqueous solution (corresponding to approximate 1.0 mg H2O2 per single plant) were exposed to different concentrations of NO2 (0.25, 0.5, 1.0, and 2.0 μL L-1, respectively) for 24 h under controlled environment. To measure the plant biomass, the plants were fumigated with the same NO2 concentrations as mentioned above for 7 h per day (8.00-15.00) for 7 days. As a control, charcoal filtered air alone was applied. Data were collected on plant biomass, total chlorophyll, photosynthetic rate, stomatal conductance, nitrate and nitrate reductase (NR), antioxidative enzymes, ascorbate (ASA), and malondialdehyde (MDA),immediately after exposure. The results showed that exposure to a moderate dose of NO2 (e.g., 0.25 μL L-1) had a favorable effect on plants, and the dry weight of the above-ground part increased, whereas the exposure to high NO2 concentrations (e.g., 0.5 μL L-1 or higher) caused a reduction in the plant biomass and the total chlorophyll, when compared with the control. In addition, at 0.5 μL L-1 or higher NO2 concentrations, prominent increases in the MDA level and superoxide dismutase (SOD) and NR activities were observed. Exposure to 1 μL L-1 and higher NO2 resulted in necroses appearing on older leaves, and an increase in catalase (CAT) activity, decrease in ASA content, increased accumulation of NO3-, and reduction in photosynthesis, when compared with the controls. No changes were detected in stomatal conductance under NO2 fumigation. The pretreatment with 10 mmol L-1 H2O2 alleviated significantly NO2- caused biomass decrease and photosynthetic inhibition when compared with H2O2-untreated plants. Under NO2 fumigation, further

  8. Monosomic Addition Lines of Flowering Chinese Cabbage (B. campestris L. ssp. chinensis var. parachinensis L. H. Bailey)-Chinese Kale (B. oleracea L. var. alboglabra L. H. Bailey)

    Institute of Scientific and Technical Information of China (English)

    WANG Xi-ne; ZHANG Cheng-he; XUAN Shu-xin; MAN Hong; LIU Hai-he; SHEN Shu-xing

    2008-01-01

    Interspecific alien addition lines have played significant roles in gene mapping, intergenomic gene transfer and chromosomal homoeological identification between closely related species. Selection of alien addition lines was conducted by karyotype analysis and morphological observation with the reference of parents. Triploid interspecies hybrid (AAC, 2n=3x=29) was obtained from Brassica campestris ssp. chinensis var. parachinensis Qinglu 9601 (tetraploid, AAAA, 2n=4x=40)×B. oleracea vat. alboglabra Baihua 9705 (diploid, CC, 2n=2x=18) by immature hybrid embryo culture in vitro. Five different alien monosomic addition lines (AA+C2, AA+C3, AA+C4, AA+C6, AA+C7) were obtained from the backcross progenies of AAC×AA. Each alien monosomic addition line has some specific morphological characters. It is feasible to obtain alien addition lines from the progenies of AAC×AA by karyotype analysis and morphological observation based on the reference of parents.

  9. Interline Photovoltaic (I-PV) power system - A novel concept of power flow control and management

    OpenAIRE

    Khadkikar, Vinod; Kirtley, James L., Jr.

    2011-01-01

    This paper presents a new system configuration for a large-scale Photovoltaic (PV) power system with multi-line transmission/distribution networks. A PV power plant is reconfigured in a way that two adjacent power system networks/ feeders can be interconnected. The inverter modules in a PV power plant are configured such that the system is represented as a back to back inverter connected multi-line system, called as Interline-PV (I-PV) system. The proposed I-PV system then can be controlled a...

  10. The world PV market 2000: shifting from subsidy to 'fully economic'?

    International Nuclear Information System (INIS)

    This article presents an overview of the world grid-connected photovoltaic (PV) market concentrating on the US, Japan and Germany. The PV markets in the three countries are examined, and PV module shipments, the economics of residential PVs in the markets, and forecasts of the grid-connected market are discussed. Details are given of the German 100,000 roofs PV roof subsidy programme to stimulate the residential and commercial grid-connected market. A summary of the grid-connected PV markets in the three countries, and economic information on German grid-connected PV roofs are tabulated

  11. Z - Source Multi Level Inverter Based PV Generation System

    Directory of Open Access Journals (Sweden)

    T. Lakhmi kanth

    2014-09-01

    Full Text Available In this paper a novel technique of Z-Source multilevel Inverter based PV Generation system is implemented and simulated using MATLAB-Simulink simulation software. The Photovoltaic cells are healthier option for converting solar energy into electricity. Due to high capital cost and low efficiency PV cells have not yet been a fully smart choice for electricity users. To enhance the performance of the system, Z-Source multi level inverter can be used in place of conventional Voltage Source Inverter (VSI in Solar Power Generation System. The PV cell model is developed using circuit mathematical equations. The Z-Source multilevel inverter is modeled to realize boosted DC to AC conversion (inversion with low THD. Outcome shows that the energy conversion efficiency of ZSMLI is a lot improved as compared to conventional voltage Source Inverter (VSI. By doing FFT analysis we can know the total THD.

  12. Disposal and recycling of end-of-life PV modules

    International Nuclear Information System (INIS)

    Recycling can be a cost-effective way to dispose of end-of-life PV modules. Recycling is likely economic if key components (e.g., Si wafers and/or glass sheets) can be salvaged intact, or the modules are classified as hazardous under existing environmental regulations. End-of-life PV modules based on thin-film CuInSe2, thin-film CdTe, amorphous silicon and crystalline silicon will likely not be classified as hazardous under existing US national regulations; but further testing is required. End-of-life CuInSe2, CdTe and crystalline Si PV modules may all be classified as hazardous under more-restrictive state regulations, e.g., in California., In every case, recycling can simplify handling and disposal of end-of-life modules

  13. Solar PV energy for rural development in Balochistan

    International Nuclear Information System (INIS)

    Province Balochistan is largest province of Pakistan with smallest density of population with little or no development. In Balochistan bulk is rural located and devoid of lives basic ingredients. In remote rural areas of Balochistan because of high cost and problems associated with grid extension or diesel power generation, solar electricity is viable alternate. Energy generated from the sun is world's most abundant and in-exhaustible source of energy PV cells sun light is converted directly in to electricity called solar PV energy. Solar energy through photovoltaic cells can be tapped to supply electricity to remote rural areas of Balochistan. In this paper author has examined the problems in more detail, showing by simple calculation of cost economics that solar PV systems are viable. (author)

  14. Budgeting for Solar PV Plant Operations & Maintenance: Practices and Pricing.

    Energy Technology Data Exchange (ETDEWEB)

    Enbar, Nadav [Electric Power Research Inst. (EPRI), Palo Alto, CA (United States); Weng, Dean [Electric Power Research Inst. (EPRI), Palo Alto, CA (United States); Klise, Geoffrey Taylor [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-12-01

    With rising grid interconnections of solar photovoltaic (PV) systems, greater attention is being trained on lifecycle performance, reliability, and project economics. Expected to meet production thresholds over a 20-30 year timeframe, PV plants require a steady diet of operations and maintenance (O&M) oversight to meet contractual terms. However, industry best practices are only just beginning to emerge, and O&M budgets—given the arrangement of the solar project value chain—appear to vary widely. Based on insights from in-depth interviews and survey research, this paper presents an overview of the utility-scale PV O&M budgeting process along with guiding rationales, before detailing perspectives on current plant upkeep activities and price points largely in the U.S. It concludes by pondering potential opportunities for improving upon existing O&M budgeting approaches in ways that can benefi t the industry at-large.

  15. Budgeting for Solar PV Plant Operations & Maintenance: Practices and Pricing.

    Energy Technology Data Exchange (ETDEWEB)

    Enbar, Nadav [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Weng, Dean [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Klise, Geoffrey Taylor [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-01-01

    With rising grid interconnections of solar photovoltaic (PV) systems, greater attention is being trained on lifecycle performance, reliability, and project economics. Expected to meet production thresholds over a 20-30 year timeframe, PV plants require a steady diet of operations and maintenance (O&M) oversight to meet contractual terms. However, industry best practices are only just beginning to emerge, and O&M budgets—given the arrangement of the solar project value chain—appear to vary widely. Based on insights from in-depth interviews and survey research, this paper presents an overview of the utility-scale PV O&M budgeting process along with guiding rationales, before detailing perspectives on current plant upkeep activities and price points largely in the U.S. It concludes by pondering potential opportunities for improving upon existing O&M budgeting approaches in ways that can benefit the industry at-large.

  16. Models for a stand-alone PV system

    DEFF Research Database (Denmark)

    Hansen, A.D.; Sørensen, Poul Ejnar; Hansen, L.H.;

    2001-01-01

    This report presents a number of models for modelling and simulation of a stand-alone photovoltaic (PV) system with a battery bank verified against a system installed at Risø National Laboratory. The work has been supported by the Danish Ministry ofEnergy, as a part of the activities in the Solar...... Energy Centre Denmark. The study is carried out at Risø National Laboratory with the main purpose to establish a library of simple mathematical models for each individual element of a stand-alone PVsystem, namely solar cells, battery, controller, inverter and load. The models for PV module and battery....... The performance of the best linear Blackbox model is compared to the KiBaM model. A validation of each of the implemented mathematical model is performed by an interactive analysis and comparison between simulation results and measurements, acquired from the stand-alone PV system at Risø....

  17. Lessons Learned from the Photovoltaic Manufacturing Technology/PV Manufacturing R&D and Thin Film PV Partnership Projects

    Energy Technology Data Exchange (ETDEWEB)

    Margolis, R.; Mitchell, R.; Zweibel, K.

    2006-09-01

    As the U.S. Department of Energy's (DOE's) Solar Energy Technologies Program initiates new cost-shared solar energy R&D under the Solar America Initiative (SAI), it is useful to analyze the experience gained from cost-shared R&D projects that have been funded through the program to date. This report summarizes lessons learned from two DOE-sponsored photovoltaic (PV) projects: the Photovoltaic Manufacturing Technology/PV Manufacturing R&D (PVMaT/PVMR&D) project and the Thin-Film PV Partnership project. During the past 10-15 years, these two projects have invested roughly $330 million of government resources in cost-shared R&D and leveraged another $190 million in private-sector PV R&D investments. Following a description of key findings and brief descriptions of the PVMaT/PVMR&D and Thin-Film PV Partnership projects, this report presents lessons learned from the projects.

  18. Time series power flow analysis for distribution connected PV generation.

    Energy Technology Data Exchange (ETDEWEB)

    Broderick, Robert Joseph; Quiroz, Jimmy Edward; Ellis, Abraham; Reno, Matthew J. [Georgia Institute of Technology, Atlanta, GA; Smith, Jeff [Electric Power Research Institute, Knoxville, TN; Dugan, Roger [Electric Power Research Institute, Knoxville, TN

    2013-01-01

    Distributed photovoltaic (PV) projects must go through an interconnection study process before connecting to the distribution grid. These studies are intended to identify the likely impacts and mitigation alternatives. In the majority of the cases, system impacts can be ruled out or mitigation can be identified without an involved study, through a screening process or a simple supplemental review study. For some proposed projects, expensive and time-consuming interconnection studies are required. The challenges to performing the studies are twofold. First, every study scenario is potentially unique, as the studies are often highly specific to the amount of PV generation capacity that varies greatly from feeder to feeder and is often unevenly distributed along the same feeder. This can cause location-specific impacts and mitigations. The second challenge is the inherent variability in PV power output which can interact with feeder operation in complex ways, by affecting the operation of voltage regulation and protection devices. The typical simulation tools and methods in use today for distribution system planning are often not adequate to accurately assess these potential impacts. This report demonstrates how quasi-static time series (QSTS) simulation and high time-resolution data can be used to assess the potential impacts in a more comprehensive manner. The QSTS simulations are applied to a set of sample feeders with high PV deployment to illustrate the usefulness of the approach. The report describes methods that can help determine how PV affects distribution system operations. The simulation results are focused on enhancing the understanding of the underlying technical issues. The examples also highlight the steps needed to perform QSTS simulation and describe the data needed to drive the simulations. The goal of this report is to make the methodology of time series power flow analysis readily accessible to utilities and others responsible for evaluating

  19. Industrial application of PV/T solar energy systems

    International Nuclear Information System (INIS)

    Hybrid photovoltaic/thermal (PV/T) systems consist of PV modules and heat extraction units mounted together. These systems can simultaneously provide electrical and thermal energy, thus achieving a higher energy conversion rate of the absorbed solar radiation than plain photovoltaics. Industries show high demand of energy for both heat and electricity and the hybrid PV/T systems could be used in order to meet this requirement. In this paper the application aspects in the industry of PV/T systems with water heat extraction is presented. The systems are analyzed with TRNSYS program for three locations Nicosia, Athens and Madison that are located at different latitudes. The system comprises 300 m2 of hybrid PV/T collectors producing both electricity and thermal energy and a 10 m3 water storage tank. The work includes the study of an industrial process heat system operated at two load supply temperatures of 60 deg. C and 80 deg. C. The results show that the electrical production of the system, employing polycrystalline solar cells, is more than the amorphous ones but the solar thermal contribution is slightly lower. A non-hybrid PV system produces about 25% more electrical energy but the present system covers also, depending on the location, a large percentage of the thermal energy requirement of the industry considered. The economic viability of the systems is proven, as positive life cycle savings are obtained in the case of hybrid systems and the savings are increased for higher load temperature applications. Additionally, although amorphous silicon panels are much less efficient than the polycrystalline ones, better economic figures are obtained due to their lower initial cost, i.e., they have better cost/benefit ratio

  20. Energy investments and production costs of amorphous silicon PV modules

    Energy Technology Data Exchange (ETDEWEB)

    Srinivas, K.S. (Neuchatel Univ., Inst. de Microtechnique, Neuchatel (Switzerland))

    1991-10-01

    Viability of large scale applications of photovoltaic technology will ultimately depend upon the economics of energy payback and production costs associated with it. For the potential options among the various PV technologies this aspect has been analysed to a considerable extent for crystalline silicon (mono- and poly-) modules. No systematic study, based on practical aspects of A-Si PV module production has yet been reported. In this study the energy investments and production costs of A-Si PV module production have been analysed based on factual data from two manufacturing units. Each process step involved in the manufacture of A-Si modules is analysed for the process electrical energy and the hidden energy content in the various materials associated with that step. Energy payback period and the production costs have been calculated on the basis of prevailing levels of conversion efficiency (5%) and production yield ([approx equal]80%). The report also covers salient features of A-Si technology, the current status of PV industry in respect of production, R+D and cost status of competing PV technologies. A review of earlier studies on energy investments and production costs of A-Si modules and a comparison of their findings with that of the present study are also discussed. Certain details which could not be included in the main text to maintain the continuity of thoughts, are presented as annexes. A short note on 'criteria for choice of technology for large scale PV production' and a brief description of the status of other thin-film technologies (CIS,CdTe) are included as Appendices at the end. figs., tabs., 18 refs.

  1. Modular Power Converters for PV Applications

    Energy Technology Data Exchange (ETDEWEB)

    Ozpineci, Burak [ORNL; Tolbert, Leon M [ORNL

    2012-05-01

    This report describes technical opportunities to serve as parts of a technological roadmap for Shoals Technologies Group in power electronics for PV applications. There are many different power converter circuits that can be used for solar inverter applications. The present applications do not take advantage of the potential for using common modules. We envision that the development of a power electronics module could enable higher reliability by being durable and flexible. Modules would have fault current limiting features and detection circuits such that they can limit the current through the module from external faults and can identify and isolate internal faults such that the remaining modules can continue to operate with only minimal disturbance to the utility or customer. Development of a reliable, efficient, low-cost, power electronics module will be a key enabling technology for harnessing more power from solar panels and enable plug and play operation. Power electronics for computer power supplies, communication equipment, and transportation have all targeted reliability and modularity as key requirements and have begun concerted efforts to replace monolithic components with collections of common smart modules. This is happening on several levels including (1) device level with intelligent control, (2) functional module level, and (3) system module. This same effort is needed in power electronics for solar applications. Development of modular units will result in standard power electronic converters that will have a lower installed and operating cost for the overall system. These units will lead to increased adaptability and flexibility of solar inverters. Incorporating autonomous fault current limiting and reconfiguration capabilities into the modules and having redundant modules will lead to a durable converter that can withstand the rigors of solar power generation for more than 30 years. Our vision for the technology roadmap is that there is no need

  2. Outdoor PV Module Degradation of Current-Voltage Parameters: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Smith, R. M.; Jordan, D. C.; Kurtz, S. R.

    2012-04-01

    Photovoltaic (PV) module degradation rate analysis quantifies the loss of PV power output over time and is useful for estimating the impact of degradation on the cost of energy. An understanding of the degradation of all current-voltage (I-V) parameters helps to determine the cause of the degradation and also gives useful information for the design of the system. This study reports on data collected from 12 distinct mono- and poly-crystalline modules deployed at the National Renewable Energy Laboratory (NREL) in Golden, Colorado. Most modules investigated showed < 0.5%/year decrease in maximum power due to short-circuit current decline.

  3. Clear sky pure water - PV water pumping and desalination

    International Nuclear Information System (INIS)

    Providing adequate portable drinking water is becoming a serious problem in remote areas. Saudi Arabia is a very suitable place to use renewable energy such as photovoltaic (PV) energy. For this reason, a PV system was designed and installed along with water pumping and desalination systems in the village of Sadous, about 72 km from Riyadh. The total number of panels is 158, and they give 11.06 kW. The average pumped water from the well is about 18 m3/day with total dissolved solids (TDS) greater than 6000 PPM. The average product water is about 5 m3/day with TDS less than 300 PPM. (Author)

  4. Design and Implementation of A PV Powered Tri-Cycle

    Directory of Open Access Journals (Sweden)

    Soumya Das

    2016-04-01

    Full Text Available Solar PV technology is one of the first among the various renewable energy technologies that have been adopted and accepted universally in order to meet the basic needs of generation of electricity. The objective of this paper is to propose a tri-cycle that utilises the application of stand-alone photovoltaic (PV system. A preliminary design and construction of a solar tri-cycle has been performed by evaluating and estimating the required panel size, battery capacity and motor power. Calculation in this paper exhibit that the solar power alone will be sufficient to operate a tri-cycle from one place to another.

  5. Review of Solar PV Market Development in East Africa

    OpenAIRE

    Hansen, Ulrich Elmer; Pedersen, Mathilde Brix; Nygaard, Ivan

    2014-01-01

    While the diffusion of solar home systems in Kenya has been market-based for some years, the diffusion of PV in most other Sub-Saharan African countries has been driven by government and donor-supported projects aimed at serving specific needs for electricity while at the same time creating a national niche market for PV. This practice is rapidly changing and, as in industrialised countries, there is evidence of a transition towards more market-based diffusion and private-sector involvement f...

  6. High Efficient Bidirectional Battery Converter for residential PV Systems

    DEFF Research Database (Denmark)

    Pham, Cam; Kerekes, Tamas; Teodorescu, Remus

    2012-01-01

    Photovoltaic (PV) installation is suited for the residential environment and the generation pattern follows the distribution of residential power consumption in daylight hours. In the cases of unbalance between generation and demand, the Smart PV with its battery storage can absorb or inject the...... power to balance it. High efficient bidirectional converter for the battery storage is required due high system cost and because the power is processed twice. A 1.5kW prototype is designed and built with CoolMOS and SiC diodes, >;95% efficiency has been obtained with 200 kHz hard switching....

  7. PV cell and module performance measurement capabilities at NREL

    Energy Technology Data Exchange (ETDEWEB)

    Rummel, S.; Emery, K.; Field, H.; Moriarty, T.; Anderberg, A.; Dunlavy, D.; Ottoson, L.

    1998-09-01

    The Photovoltaic (PV) Cell and Module Performance Characterization team at NREL supports the entire photovoltaic community by providing: secondary calibrations of photovoltaic cells and modules; efficiency measurements with respect to a given set of standard reporting conditions; verification of contract efficiency milestones; and current versus voltage (I-V) measurements under various conditions of temperature, spectral irradiance, and total irradiance. Support is also provided to in-house programs in device fabrication, module stability, module reliability, PV systems evaluations, and alternative rating methods by performing baseline testing, specialized measurements and other assistance when required. The I-V and spectral responsivity equipment used to accomplish these tasks are described in this paper.

  8. A Comparative Life Cycle Assessment of PV Solar Systems

    OpenAIRE

    Bekkelund, Kristine

    2013-01-01

    In this report, a comparative life cycle assessment (LCA) of a rooftop, grid-connected photovoltaic (PV) system has been conducted. The primary objective has been to assess the environmental impacts resulting from the PV system over its entire lifetime, while the secondary goal has been to perform a sensitivity analysis on selected parameters and compare the results with the impacts from wind power. Four different cases have been assessed: Mc-Si Sim, mc-Si ESS, CdTe and CIGS. The difference b...

  9. Quantifying PV module microclimates and translation into accelerated weathering protocols

    Science.gov (United States)

    Phillips, Nancy H.; Scott, Kurt P.

    2014-10-01

    Long term reliability is not well addressed by current standards for PV modules or components, and developing accelerated weathering stress protocols to test the resistance of key components to wear-out is an active area of research. A first step is to understand and quantify the range of actual stresses modules will encounter in the various mounting configurations and in-service environments. In this paper, we use real-world data to benchmark PV module service environments in hot/dry, hot/wet, and temperate environments, with subsequent analysis to translate the microclimate data into a portfolio of practical weathering instrument settings.

  10. PV domestic field trial. Third annual technical report

    Energy Technology Data Exchange (ETDEWEB)

    Crick, F.; Davies, N.; Munzinger, M.; Pearsall, N.; Martin, C.

    2004-07-01

    This report summaries the results of a field trials investigating the design, construction and operation of photovoltaic (PV) systems installed during 2003 to provide information for utilities, building developers and those involved in PV installations and operations. Topics examined include the appearance of the systems, their architectural integration, the different fixing methods, the cost effectiveness of the systems, problems encountered, and monitoring activities. Key issues discussed include communication and co-ordination between interested bodies, siting and location, and good practice. Details are given of monitoring inspection visits, and performance analysis.

  11. Task 9. PV deployment in developing countries. Institutional framework and financial instruments for PV deployment in developing countries

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-09-15

    This report for the International Energy Agency (IEA) made by Task 9 of the Photovoltaic Power Systems (PVPS) programme takes a look at the institutional framework and financial instruments necessary for PV deployment in developing countries. This guide describes the institutional and financial aspects that need to be addressed to ensure that a long term sustainable (and profitable) PV market is established in developing countries. The guide details main fundamental functions that need to be performed such as the agents needed to perform the functions and their differing roles within the framework, the relationships between these agents and the financial instruments available. It is stated that the majority of the aspects recommended in this guide can be adopted to two main PV deployment models: direct sales and rural electrification and development programmes. It is noted that both approaches will have to be tailored and adapted to local conditions.

  12. PV solar electricity industry: Market growth and perspective

    International Nuclear Information System (INIS)

    The photovoltaic (PV) solar electricity market has shown an impressive 33% growth per year since 1997 until today with market support programs as the main driving force. The rationales for this development and the future projections towards a 100 billion | industry in the 2020s, by then only driven by serving cost-competitively customer needs are described. The PV market, likely to have reached about 600MW in the year 2003, is discussed according to its four major segments: consumer applications, remote industrial electrification, developing countries, and grid-connected systems. While in the past, consumer products and remote industrial applications used to be the main cause for turnover in PV, in recent years the driving forces are more pronounced in the grid-connected systems and by installations in developing countries. Examples illustrating the clear advantage of systems using PV over conventional systems based, e.g., on diesel generators in the rural and remote electrification sector are discussed. For the promotion of rural electrification combined with the creation of local business and employment, suitable measures are proposed in the context of the PV product value chain. The competitiveness of grid-connected systems is addressed, where electricity generating costs for PV are projected to start to compete with conventional utility peak power quite early between 2010 and 2020 if time-dependent electricity tariffs different for bulk and peak power are assumed. The most effective current-pulling force for grid-connected systems is found to be the German Renewable Energy (EEG) Feed-in Law where the customers are focusing on yield, performance, and long-life availability. The future growth in the above-defined four market segments are discussed and the importance of industry political actions in order to stimulate the markets either in grid-connected systems by feed-in tariff programs as well as for off-grid rural developing country applications by long

  13. Comparison of three different methods of perturbing the potential vorticity field in mesoscale forecasts of Mediterranean heavy precipitation events: PV-gradient, PV-adjoint and PV-satellite

    Science.gov (United States)

    Vich, M.; Romero, R.; Richard, E.; Arbogast, P.; Maynard, K.

    2010-09-01

    Heavy precipitation events occur regularly in the western Mediterranean region. These events often have a high impact on the society due to economic and personal losses. The improvement of the mesoscale numerical forecasts of these events can be used to prevent or minimize their impact on the society. In previous studies, two ensemble prediction systems (EPSs) based on perturbing the model initial and boundary conditions were developed and tested for a collection of high-impact MEDEX cyclonic episodes. These EPSs perturb the initial and boundary potential vorticity (PV) field through a PV inversion algorithm. This technique ensures modifications of all the meteorological fields without compromising the mass-wind balance. One EPS introduces the perturbations along the zones of the three-dimensional PV structure presenting the local most intense values and gradients of the field (a semi-objective choice, PV-gradient), while the other perturbs the PV field over the MM5 adjoint model calculated sensitivity zones (an objective method, PV-adjoint). The PV perturbations are set from a PV error climatology (PVEC) that characterizes typical PV errors in the ECMWF forecasts, both in intensity and displacement. This intensity and displacement perturbation of the PV field is chosen randomly, while its location is given by the perturbation zones defined in each ensemble generation method. Encouraged by the good results obtained by these two EPSs that perturb the PV field, a new approach based on a manual perturbation of the PV field has been tested and compared with the previous results. This technique uses the satellite water vapor (WV) observations to guide the correction of initial PV structures. The correction of the PV field intents to improve the match between the PV distribution and the WV image, taking advantage of the relation between dark and bright features of WV images and PV anomalies, under some assumptions. Afterwards, the PV inversion algorithm is applied to run

  14. Draft genome sequences of five Pseudomonas syringae pv. actinidifoliorum strains isolated in France.

    Science.gov (United States)

    Cunty, Amandine; Cesbron, Sophie; Briand, Martial; Carrère, Sébastien; Poliakoff, Françoise; Jacques, Marie-Agnès; Manceau, Charles

    2016-01-01

    Pseudomonas syringae pv. actinidifoliorum causes necrotic spots on the leaves of Actinidia deliciosa and Actinidia chinensis. P. syringae pv. actinidifoliorum has been detected in New Zealand, Australia, France and Spain. Four lineages were previously identified within the P. syringae pv. actinidifoliorum species group. Here, we report the draft genome sequences of five strains of P. syringae pv. actinidifoliorum representative of lineages 1, 2 and 4, isolated in France. The whole genomes of strains isolated in New Zealand, representative of P. syringae pv. actinidifoliorum lineages 1 and 3, were previously sequenced. The availability of supplementary P. syringae pv. actinidifoliorum genome sequences will be useful for developing molecular tools for pathogen detection and for performing comparative genomic analyses to study the relationship between P. syringae pv. actinidifoliorum and other kiwifruit pathogens, such as P. syringae pv. actinidiae. PMID:27237113

  15. Dynamic Model Validation of PV Inverters Under Short-Circuit Conditions: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Muljadi, E.; Singh, M.; Bravo, R.; Gevorgian, V.

    2013-03-01

    Photovoltaic (PV) modules have dramatically decreased in price in the past few years, spurring the expansion of photovoltaic deployment. Residential and commercial rooftop installations are connected to the distribution network; large-scale installation PV power plants (PVPs) have benefited from tax incentives and the low cost of PV modules. As the level penetration of PV generation increases, the impact on power system reliability will also be greater. Utility power system planners must consider the role of PV generation in power systems more realistically by representing PV generation in dynamic stability analyses. Dynamic models of PV inverters have been developed in the positive sequence representation. NREL has developed a PV inverter dynamic model in PSCAD/EMTDC. This paper validates the dynamic model with an actual hardware bench test conducted by Southern California Edison's Distributed Energy Resources laboratory. All the fault combinations -- symmetrical and unsymmetrical -- were performed in the laboratory. We compare the simulation results with the bench test results.

  16. Role of Edible Fungi Bio-Processor in Increasing the Output of the Cultivated Agaricus Campestris%食用菌生物激活处理器在四孢蘑菇栽培中的增产效应

    Institute of Scientific and Technical Information of China (English)

    杨淑全; 刘宇鹏; 马云侠; 毛贵阳; 郜白银

    2002-01-01

    将四孢蘑菇(Agaricus campestris)用食用菌生物激活处理器制得的"双磁水"浇、喷后产量增加了40%以上,菇体硬实、菌盖厚、菌柄短粗且推迟开伞时间,鲜菇氨基酸和维生素C含量明显增多.

  17. Voltage rise mitigation for solar PV integration at LV grids:Studies from PVNET. dk

    OpenAIRE

    Yang, Guangya; Marra, Francesco; Juamperez Goñi, Miguel Angel; Kjaer, Søren Bækhøj; Hashemi Toghroljerdi, Seyedmostafa; Østergaard, Jacob; Hans Henrik, Ipsen; Kenn H. B., Frederiksen

    2015-01-01

    Solar energy from photovoltaic (PV) is among the fastest developing renewable energy systems worldwide. Driven by governmental subsidies and technological development, Europe has seen a fast expansion of solar PV in the last few years. Among the installed PV plants, most of them are situated at the distribution systems and bring various operational challenges such as power quality and power flow management. The paper discusses the modelling requirements for PV system integration studies, as w...

  18. Comparison of the indoor performance of 12 commercial PV products by a simple model

    OpenAIRE

    Apostolou, G; Reinders, A.H.M.E.; Verwaal, M.

    2016-01-01

    This article presents a simple comparative model which has been developed for the estimation of the performance of photovoltaic (PV) products' cells in indoor environments. The model predicts the performance of PV solar cells, as a function of the distance from a spectrum of artificial (fluorescent light, halogen light, and light-emitting diodes) and natural light. It intends to support designers, while creating PV-integrated products for indoor use. For the model's validation, PV cells of 12...

  19. PV-θ view of the zonal mean state of the atmosphere

    Directory of Open Access Journals (Sweden)

    Aarnout J. Van Delden

    2012-08-01

    Full Text Available The relation between zonal mean potential vorticity (PV in potential temperature (θ coordinates and the zonal mean zonal wind in January and in July is studied. PV-anomalies are defined with respect to a reference state that is at rest with respect to the rotating earth. Two important PV-anomalies are identified. One PV-anomaly, the ‘Ex-UTLS PV-anomaly’, coincides approximately with the extratropical tropopause (310–360 K. It is a permanent feature of the zonal mean state. The other PV-anomaly is located higher in the stratosphere. It exhibits a strong seasonal cycle, i.e. in winter, it is strongly positive, while in summer, it is weakly negative. In the Northern Hemisphere winter, the Ex-UTLS PV-anomaly and the stratospheric PV-anomaly are separated by a ‘surf-zone’, which is characterised by a negative PV-anomaly pole-wards of a positive PV-anomaly. Piecewise PV-inversion reveals that (1 the Ex-UTLS PV-anomaly induces the westerly winds in the troposphere and the lower stratosphere, including the subtropical jet, that (2 the positive stratospheric PV-anomaly induces the stratospheric polar night jet and that (3 the negative polar cap stratospheric PV-anomaly in summer reduces the westerly wind speeds in the troposphere and induces easterly winds in the stratosphere. The Ex-UTLS PV-anomaly is manifest mainly as an isentropic density- (or mass- anomaly. Piecewise PV-inversion of these anomalies in isolation should account for this by an appropriate adjustment of the lower boundary condition.

  20. An Improved Matlab-Simulink Model of PV Module considering Ambient Conditions

    OpenAIRE

    2014-01-01

    A photovoltaic (PV) model is proposed on Matlab/Simulink environment considering the real atmospheric conditions and this PV model is tested with different PV panels technologies (monocrystalline silicon, polycrystalline silicon, and thin film). The meteorological data of Istanbul—the location of the study—such as irradiance, cell temperature, and wind speed are taken into account in the proposed model for each technology. Eventually, the power outputs of the PV module under real atmospheric ...

  1. Comparing critical success factors for PV between three regions

    International Nuclear Information System (INIS)

    As a research method the project team has chosen to survey the opinion of PV experts and persons involved in the implementation of PV. Therefore, a questionnaire was sent to about 300 persons spread among 3 regions America, Europe and Asia. The returned questionnaires have been statistical analysed with the software tool SPSS. The used analytical methods can be divided in a comparing method (Mann-Whitney test) and ranking methods (Friedman test and the medal classification test). General conclusions are that there is a significant difference in answers between America and Europe about the significance of 'cost reduction'. Also Asia is significant different from America and Europe for the factor 'technical' reliability. There is a significant difference about the status of financing between America and Europe versus Asia. All the regions have a different opinion about the status of RD and D'. Also the status of 'the PV network' is significant different between Asia and America. America and Europe rank 'financial aspects' and 'cost reduction' as the most significant aspects while Asia rank 'specialist knowledge' and 'the PV network' as the most significant. All regions rank 'specialist knowledge' having the worst status and rank 'environmental merits' and 'technical reliability' having the best status. Finally Europe and Asia differ significant about which aspect is the most important for the factors 'internationalisation and other activities'. Europe finds 'harmonisation of policy' the most important internationalisation aspect and Asia prefers 'development aid'. Asia prefers 'pioneering activities' and Europe prefers 'initiatives by social organisations' as most important other activity. (au)

  2. Performance enhancement of PV cells through micro-channel cooling

    Directory of Open Access Journals (Sweden)

    Muzaffar Ali

    2015-11-01

    Full Text Available Efficiency of a PV cell is strongly dependent on its surface temperature. The current study is focused to achieve maximum efficiency of PV cells even in scorching temperatures in hot climates like Pakistan where the cell surface temperatures can even rise up to around 80 ℃. The study includes both the CFD and real time experimental investigations of a solar panel using micro channel cooling. Initially, CFD analysis is performed by developing a 3D model of a Mono-Crystalline cell with micro-channels to analyze cell surface temperature distribution at different irradiance and water flow rates. Afterwards, an experimental setup is developed for performance investigations under the real conditions of an open climate of a Pakistan's city, Taxila. Two 35W panels are manufactured for the experiments; one is based on the standard manufacturing procedure while other cell is developed with 4mm thick aluminum sheet having micro-channels of cross-section of 1mm by 1mm. The whole setup also includes different sensors for the measurement of solar irradiance, cell power, surface temperature and water flow rates. The experimental results show that PV cell surface temperature drop of around 15 ℃ is achieved with power increment of around 14% at maximum applied water flow rate of 3 LPM. Additionally, a good agreement is also found between CFD and experimental results. Therefore, that study clearly shows that a significant performance improvement of PV cells can be achieved through the proposed cell cooling technique.

  3. Tools for PV (photovoltaic) plant operators: Nowcasting of passing clouds

    Czech Academy of Sciences Publication Activity Database

    Paulescu, M.; Badescu, V.; Brabec, Marek

    2013-01-01

    Roč. 54, č. 1 (2013), s. 104-112. ISSN 0360-5442 R&D Projects: GA MŠk LD12009 Institutional support: RVO:67985807 Keywords : PV ( photovoltaic ) plants * Sunshine number * Nowcasting * ARIMA (Autoregressive Integrated Moving Average) modeling Subject RIV: JE - Non-nuclear Energetics, Energy Consumption ; Use Impact factor: 4.159, year: 2013

  4. The German experience with grid-connected PV-systems

    International Nuclear Information System (INIS)

    Grid-connected photovoltaics experienced increasing attention in Germany in recent years and are expected to face a major boost at the beginning of the new millennium. Highlights like the German 100,000-Roofs-Solar-Programme, PV programmes at schools financed by utilities and governments (e.g. 'SONNEonline' by PreussenElektra, 'Sonne in der Schule' by BMWi and 'Sonne in der Schule' by Bayernwerk) and large centralised installations of MW size ('Neue Messe Munchen' by Bayernwerk and 'Energiepark Mont-Cenis' by state Nordrhein-Westfalen, Stadtwerke Herne and European Union) count for the potential of grid-connected PV. Today in Germany a typical grid-connected PV installation of 1 kW nominal power produces average annual energy yields of 700 kWh (dependent on location and system components) and shows a high operating availability. The price per kWh from PV installations is still significantly higher than the price for conventional energy, but new funding schemes and cost models (like the large increase of feed-in tariff in Germany due to the Act on Granting Priority to Renewable Energy Sources in 2000) give optimism about the future. (Author)

  5. Environmental impacts of PV systems -- Ground-based vs BIPV

    International Nuclear Information System (INIS)

    This study is part of the ExternE program of the European Commission on the external costs of the photovoltaic (PV) fuel cycle. The objective of this paper is the quantitative evaluation of the main environmental impacts of two selected PV systems--the ground-based 1MWp system in Toledo, Spain and the 40 kWp building integrated facade in Newcastle upon Tyne, NE England, using the methodology of life cycle analysis (LCA). Both systems use silicon wafer technology at present, but the Newcastle facade was also studied with the incorporation CdTe modules. The results of the LCA show that atmospheric emissions are the priority impacts with respect to the assessed PV systems. Comparing Si wafer systems, the CO2 emissions were 88 t/GWh for the Toledo PV plant and 143t/GWh for the BIPV facade. If the facade had used electrodeposited CdTe, the CO2 emissions would fall to about 50t/GWh

  6. DISTRIBUTION FEEDER PROTECTION WITH AND WITHOUT PV SYSTEM

    OpenAIRE

    PADMAVATHY.P, PARTHASARATHY.S

    2013-01-01

    This paper deals with the enhanced fault analysis methodology enabling protection engineers to design a distribution protective system. This paper also deals with the determination of operating time of the protective devices on distribution feeder with and without photovoltaic systems along with the computation of fault current and its variation on using photovoltaic (PV) system.

  7. Recent advances in PV systems technology development in Europe

    Energy Technology Data Exchange (ETDEWEB)

    Imamura, M.; Grottke, M.; Weiss, I. [WIP Renewable Energies Division, Munich (Germany)

    1995-11-01

    The objectives of the photovoltaics (PV) systems technology development were to study several aspects of plant design, monitoring, control, operation, and management of different types of photovoltaic plants. Unsolved problems were to be identified and analysed, and guidelines to improve the monitoring system were to be developed. Principal studies are summarized.

  8. Opportunities and Challenges for Power Electronics in PV Modules (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Kurtz, S.; Deline, C.; Wohlgemuth, J.; Marion, B.; Granata, J.

    2011-02-01

    The presentation describes the value of adding DC converters and other power electronics to modules to improve their output even when shading or bad cells would otherwise decrease the module output. The presentation was part of a workshop sponsored by ARPA-E exploring the opportunities for power electronics to support PV applications.

  9. PV Systems Reliability Final Technical Report: Ground Fault Detection

    Energy Technology Data Exchange (ETDEWEB)

    Lavrova, Olga [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Flicker, Jack David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Johnson, Jay [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-01-01

    We have examined ground faults in PhotoVoltaic (PV) arrays and the efficacy of fuse, current detection (RCD), current sense monitoring/relays (CSM), isolation/insulation (Riso) monitoring, and Ground Fault Detection and Isolation (GFID) using simulations based on a Simulation Program with Integrated Circuit Emphasis SPICE ground fault circuit model, experimental ground faults installed on real arrays, and theoretical equations.

  10. Selecting Solar. Insights into Residential Photovoltaic (PV) Quote Variation

    Energy Technology Data Exchange (ETDEWEB)

    Davidson, Carolyn [National Renewable Energy Lab. (NREL), Golden, CO (United States); Margolis, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-10-01

    This analysis leverages available data from EnergySage, an online solar marketplace, to offer the first data-driven characterization of quote variation faced by prospective PV customers, lending early insight into the decisions customers face once they have initial buy-in.

  11. PV industry growth and module reliability in Thailand

    Science.gov (United States)

    Chenvidhya, Dhirayut; Seapan, Manit; Sangpongsanont, Yaowanee; Chenvidhya, Tanokkorn; Limsakul, Chamnan; Songprakorp, Roongrojana

    2015-09-01

    The PV applications in Thailand are now installed more than 1.2 GWp cumulatively. It is due to the National Renewable Energy Program and its targets. In the latest Alternative Energy Development Plan (AEDP), the PV electricity production target has increased from 2 GWp to 3 GWp. With this rapid growth, customers and manufacturers seek for module standard testing. So far over one thousands of PV modules per annum have been tested since 2012. The normal tests include type approval test according to TIS standard, acceptance test and testing for local standard development. For type test, the most module failure was found during damp heat test. For annual evaluation test, the power degradation and delamination of power was found between 0 to 6 percent from its nameplate after deployment of 0 to 5 years in the field. For thin-film module, the degradation and delamination was found in range of 0 to 13 percent (about 5 percent on average) from its nameplate for the modules in operation with less than 5 years. However, for the PV modules at the reference site on campus operated for 12 years, the power degradation was ranging from 10 to 15 percent. Therefore, a long term performance assessment needs to be considered to ensure the system reliability.

  12. Detection of Pseudomonas savastanoi pv. glycinea in soybean seeds

    Science.gov (United States)

    This chapter is one of 52 that will compose the second edition of the Laboratory Manual for the Detection of Plant Pathogenic Bacteria from Seeds and other Planting Material, to be published by the American Phytopathological Society. The chapter presents a description of Pseudomonas savastanoi pv. ...

  13. ECO-TOURISM SUSTAINABILITY THROUGH PV TECHNOLOGY: A COMPREHENSIVE REVIEW

    Directory of Open Access Journals (Sweden)

    ARAVIND C. V

    2013-12-01

    Full Text Available Through the Economic Transformation program the Malaysian Government aims to consider tourism as one of the major contributors to the country’s economy and as an industry that imbibe on the principles of environmental responsibility and sustainable development. The growing challenges in the prevention of expansion in agriculture, forestry and aquaculture, and over-exploitation of the natural resources, have made ecotourism extremely popular as a solution for developing tourism sites. Ecotourism attracts many people who wish not only to explore natural wonders but also to protect them for future generations. Most of the ecotourism sites are presumably situated far from the conventional energy resources and thus transporting electricity to those areas are discussed as inefficient and unsustainable. However, solar Photo-voltaic (PV system is clean and alternative energy to suffice the energy demands of eco-tourist sites. This paper puts statements of the energy demand in global and its impact on the traditional fossil fuels and proposes PV as an alternative renewable technology pertaining to the eco-tourism application. The paper especially focuses on solar PV systems which not only could supply the energy demand of tourist sites but can also maintain the image of the ecotourism. A case of a model lodge is used for the study, through the energy demand analysis. A comprehensive review on the PV architecture is presented that derive interest in the implementation of such structure for the case presented.

  14. PV power system using hybrid converter for LED indictor applications

    International Nuclear Information System (INIS)

    Highlights: • This paper presents a LED indictor driving circuit with a PV arrays as its power source. • The perturb-and-observe method is adopted to extract the maximum power of PV arrays. • The proposed circuit structure has a less component counts and higher conversion efficiency. • A prototype of LED indictor driving circuit has been implemented to verify its feasibility. • The proposed hybrid converter is suitable for LED inductor applications. - Abstract: This paper presents a LED indictor driving circuit with a PV arrays as its power source. The LED indictor driving circuit includes battery charger and discharger (LED driving circuit). In this research, buck converter is used as a charger, and forward converter with active clamp circuit is adopted as a discharger to drive the LED indictor. Their circuit structures use switch integration technique to simplify them and to form the proposed hybrid converter, which has a less component counts, lighter weight, smaller size, and higher conversion efficiency. Moreover, the proposed hybrid converter uses a perturb-and-observe method to extract the maximum power from PV arrays. Finally, a prototype of an LED indictor driving circuit with output voltage of 10 V and output power of 20 W has been implemented to verify its feasibility. It is suitable for the LED inductor applications

  15. Development of solar energy for efficient PV application systems

    International Nuclear Information System (INIS)

    It is essential to increase research, development, awareness for the application of solar energy as an important source of life. The cost of PV systems has decreased due to the improvement in techniques of manufacturing and performance. In reality, photovoltaic is one technology that allows the production of electricity with only two components: technological, which is the PV module and environmental, which is the sun. The knowledge of the components market represents a critical parameters in establishing sustainable industrial applications on different activity sectors. This paper illustrates the advantages of using photovoltaic in rural area and their economic and environmental impact. In regions where petroleum or other fossil fuels are not available, and where these remote area are not connected to the electrical grid, there is a strong and increasing demand for the technologies related to photovoltaic application systems. Water extracting and pumping, telecommunication and lighting, irrigation systems, electrical driven cars and trucks represent some of these important applications. The paper also develops critical skills for the most useful PV application in Egypt and provide to the industry a development forecast for the new technology. Then an initiation contacts and cooperation on PV application between industries specially in North Africa Middle East in order to improve the reliability and to get cheaper systems.(Author)

  16. Insights into xanthomonas axonopodis pv. Citri biofilm through proteomics

    KAUST Repository

    Zimaro, Tamara

    2013-08-07

    Background: Xanthomonas axonopodis pv. Citri (X. a. pv. Citri) causes citrus canker that can result in defoliation and premature fruit drop with significant production losses worldwide. Biofilm formation is an important process in bacterial pathogens and several lines of evidence suggest that in X. a. pv. Citri this process is a requirement to achieve maximal virulence since it has a major role in host interactions. In this study, proteomics was used to gain further insights into the functions of biofilms. Results: In order to identify differentially expressed proteins, a comparative proteomic study using 2D difference gel electrophoresis was carried out on X. a. pv. Citri mature biofilm and planktonic cells. The biofilm proteome showed major variations in the composition of outer membrane proteins and receptor or transport proteins. Among them, several porins and TonB-dependent receptor were differentially regulated in the biofilm compared to the planktonic cells, indicating that these proteins may serve in maintaining specific membrane-associated functions including signaling and cellular homeostasis. In biofilms, UDP-glucose dehydrogenase with a major role in exopolysaccharide production and the non-fimbrial adhesin YapH involved in adherence were over-expressed, while a polynucleotide phosphorylase that was demonstrated to negatively control biofilm formation in E. coli was down-regulated. In addition, several proteins involved in protein synthesis, folding and stabilization were up-regulated in biofilms. Interestingly, some proteins related to energy production, such as ATP-synthase were down-regulated in biofilms. Moreover, a number of enzymes of the tricarboxylic acid cycle were differentially expressed. In addition, X. a. pv. Citri biofilms also showed down-regulation of several antioxidant enzymes. The respective gene expression patterns of several identified proteins in both X. a. pv. Citri mature biofilm and planktonic cells were evaluated by

  17. Rooftop PV system. PV:BONUS Phase 3B, final technical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-11-01

    Under the PV:BONUS Program, ECD and United Solar developed, demonstrated and commercialized two new lightweight, flexible BIPV modules specifically designed as replacements for conventional asphalt shingles and standing seam metal roofing. These modules can be economically and aesthetically integrated into new residential and commercial buildings, and can be used to address the even larger roofing-replacement market. An important design feature of these modules, which minimizes the installation and balance-of-system costs, is their ability to be installed by conventional roofing contractors without special training. The modules are fabricated from high-efficiency, triple-junction spectrum-splitting a-Si alloy solar cells developed by ECD and United Solar. These cells are produced on thin, flexible stainless steel substrates and encapsulated with polymer materials. The Phase 3 program began in August 1995. The principal tasks and goals of this program, which have all been successfully completed by ECD and United Solar, are described in the body and appendices of this report.

  18. PV value analysis: Progress report on PV-Compact Coordinating Council's consensus research agenda

    International Nuclear Information System (INIS)

    A survey of published and ongoing valuation research indicates that grid-connected photovoltaic (PV) technology is at or close to cost-effectiveness, from the utility or end-user point of view, in an increasing but carefully selected array of distributed utility applications. This conclusion is based on conventional analyses of utility avoided costs (energy, effective load carrying capability, and transmission and distribution costs including line losses) and customer benefits (energy and demand bill savings, tax benefits). It may provide the basis for regulatory review of utility transmission or distribution investments to test prudence or usefulness. The conclusion would be stronger with consideration of the values of risk mitigation, power quality, strategic value to utilities, and satisfaction of customer preference. Further work would therefore be useful in quantifying these factors. The economic conclusions prevail irrespective of the structure of the utility industry. However, the analysis is site-specific so its broad application depends on development of easily operated models and other analytical tools for use in the field and by the regulatory process

  19. Large Scale Solar Power Integration in Distribution Grids: PV Modelling, Voltage Support and Aggregation Studies

    NARCIS (Netherlands)

    Samadi, A.

    2014-01-01

    Long term supporting schemes for photovoltaic (PV) system installation have led to accommodating large numbers of PV systems within load pockets in distribution grids. High penetrations of PV systems can cause new technical challenges, such as voltage rise due to reverse power flow during light load

  20. Household photovoltaic market in Xining, Qingha province, China: the role of local PV business

    International Nuclear Information System (INIS)

    This paper assesses the present and future market for household photovoltaic (PV) systems in rural Northwest China, especially from the PV commerce at Xining, Qinghai Province. This unsubsidised free market is now met by the emerging PV industry in China, which includes cell and module manufacturers, and PV system distributors and assemblers. For widespread deployment of such a renewable energy technology, the development of a local free market seems more successful than donor- or 'government subsidy'-driven programmes. Presently, there is a thriving infant PV industry in Northwest China, mostly centred in Xining. Xining-based PV sales companies have extensive networks for selling, marketing and servicing household PV systems for rural farmers and nomads. Small systems are now ordinary items on sale in local shops. Based on interviews and fieldwork observations with seven major PV sales companies in Xining, the household PV market is assessed from the present business operations of these companies. Detail of primary sources is given with the aim of archiving seminal progress in the history of photovoltaic power. The results suggest that although the household PV market will continue to grow, current government and international sponsored PV programmes can create both opportunities and barriers for the infant PV market an industry in China. (author)