WorldWideScience

Sample records for campestris pv pruni

  1. Chemical characterization of Xanthan biopolymers synthesized by Xanthomonas campestris pv pruni strains; Caracterizacao quimica de biopolimeros sintetizados por Xanthomonas campestris pv pruni

    Energy Technology Data Exchange (ETDEWEB)

    Moreira, Angelita da S.; Vendruscolo, Claire T.; Furlan, Ligia [Universidade Federal de Pelotas, RS (Brazil). Centro de Biotecnologia]. E-mail: angelita@ufpel.tche.br; claire@ufpel.tche.br; ligia@ufpel.tche.br; Galland, Griselda [Rio Grande do Sul Univ., Porto Alegre, RS (Brazil). Inst. de Qumica

    2001-07-01

    In this work we describe the characterisation of Xanthan biopolymers synthesized by two Xanthomonas campestris pv pruni strains, in aerobic fermentation. By chromatography on TLC we could notice the presence of Mannose monomer in higher proportion in the 82 strain with relation to the another ones. The viscosity results showed the temperature dependence. The 06 and 82 strains had their viscosity increased whereas for the 87 strain we could observe a reduction with temperature increasing. The {sup 13}C NMR spectrum of 87 strain showed the characteristic signals at approximately 92.8, 70.4 and 61.4 ppm, attributed to C1, C4 and C6 from glucose monomer, with higher intensity. (author)

  2. Chemical characterization of Xanthan biopolymers synthesized by Xanthomonas campestris pv pruni strains

    International Nuclear Information System (INIS)

    In this work we describe the characterisation of Xanthan biopolymers synthesized by two Xanthomonas campestris pv pruni strains, in aerobic fermentation. By chromatography on TLC we could notice the presence of Mannose monomer in higher proportion in the 82 strain with relation to the another ones. The viscosity results showed the temperature dependence. The 06 and 82 strains had their viscosity increased whereas for the 87 strain we could observe a reduction with temperature increasing. The 13C NMR spectrum of 87 strain showed the characteristic signals at approximately 92.8, 70.4 and 61.4 ppm, attributed to C1, C4 and C6 from glucose monomer, with higher intensity. (author)

  3. Hospedeiros alternativos de Xanthomonas campestris pv. viticola Alternative hosts of Xanthomonas campestris pv. viticola

    OpenAIRE

    Ana Rosa Peixoto; Rosa L.R. Mariano; José Osmã T. Moreira; Ivanise O. Viana

    2007-01-01

    Xanthomonas campestris pv. viticola (Xcv), que causa o cancro bacteriano da videira, sobrevive em plantas infectadas, epifiticamente em órgãos da parte aérea e pode ser veiculada em mudas e/ou bacelos infectados. O trabalho teve como objetivo investigar possíveis hospedeiros alternativos do patógeno, visando fornecer subsídios para o manejo da doença. A partir das plantas invasoras Alternanthera tenella, Amaranthus sp., Glycine sp. e Senna obtusifolia com sintomas similares aos do cancro bact...

  4. Occurrence of Xanthomonas campestris pv. campestris (Pammel, 1895 Dowson 1939, on Brassicas in Montenegro

    Directory of Open Access Journals (Sweden)

    Dragana Radunović

    2012-01-01

    Full Text Available Brassicas form the most important group of vegetable crops in Montenegro. The cabbage(Brassica oleracea var. capitata is most commonly grown, although other brassicas,particularly kale, Brussels sprout, cauliflower and broccoli, have been increasingly producedsince recently. One of the specialties of vegetable production in Montenegro is growing ofcollard (Brassica oleracea var. acephala, which is the simplest variety of the Brassica oleraceaspecies and in the nearest relation with their wild ancestor – the sylvestris variety.Diseases are the main restrictive factors for successful production of these vegetables.Susceptibility of the cultivars and inadequate control often result in more or less damagedcrops in some plots.Causal agents of brassica diseases, especially bacterial, have not been investigated inMontenegro until 2009. Since the symptoms observed in 2009 were „V” shaped leaf edgenecrosis and black rot of vascular tissue, it was assumed that they were caused by plantpathogenic bacterium Xanthomonas campestris pv. campestris.Samples of the infected plants were collected from different localities in Montenegro.Isolation and identification of the bacterium were performed using laboratory methodsaccording to Schaad (1980, Lelliott and Stead (1987 and Arsenijević (1997. Examinationof chosen bacterial isolates was conducted using both, classical bacteriological methods(examination of their pathogenic, morphological, cultivation and biochemical and physiologicalcharacteristics, and ELISA test.The obtained results confirmed the presence of X.campestris pv. campestris (Pammel,1895 Dowson 1939, on cabbage, kale, broccoli and collard in Montenegro. This is the firstexperimental evidence that collard is the host of X. campestris pv. campestris in Montenegro.

  5. 40 CFR 180.1261 - Xanthomonas campestris pv. vesicatoria and Pseudomonas syringae pv. tomato specific Bacteriophages.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Xanthomonas campestris pv. vesicatoria and Pseudomonas syringae pv. tomato specific Bacteriophages. 180.1261 Section 180.1261 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN...

  6. Especificidade de hospedeiro nas interações Xanthomonas campestris pv. campestris - brássicas Host specificity in interaction Xanthomonas campestris pv. campestris - brassicas

    Directory of Open Access Journals (Sweden)

    Dulândula Silva Miguel-Wruck

    2010-06-01

    Full Text Available Face às escassas informações acerca da variabilidade patogênica de isolados brasileiros de Xanthomonas campestris pv. campestris, realizou-se um estudo para avaliar a especificidade patogênica de trinta e três isolados do patógeno, provenientes de várias regiões do Brasil e do exterior, a oito espécies de brássicas, através de inoculação por meio de injeção da suspensão bacteriana nas folhas. Desse total, 12 isolados foram obtidos de couve-comum (Brassica oleracea var. acephala, nove de repolho (B. oleracea var. capitata, cinco de couve-flor (B. oleracea var. botrytis, dois de canola (B. napus, um de brócolos (B. oleracea var. italica, um de couve-chinesa (B. chinensis, um de couve-rábano (B. oleracea var. gongylodes e dois de rabanete (Raphanus sativus. A avaliação da patogenicidade dos isolados da bactéria, frente aos hospedeiros em estudo, demonstrou que 14 deles não apresentaram especificidade, originando sintomas em todas as diferentes plantas inoculadas. Os 19 isolados restantes, entretanto, apresentaram relativo grau de especificidade, não causando doença em uma ou mais das plantas inoculadas.Considering the lack of information in literature about the pathogenic variability of Brazilian isolates of Xanthomonas campestris pv. campestris, a study was carried out to determine the pathogenic specificity of 33 isolates of this bacterium originated from several regions of Brazil and overseas to eight different Brassica species, through inoculation by means of injection of the bacterial suspension in leaves. From these isolates, 12 were obtained from collard greens (Brassica oleracea var. acephala, nine from cabbage (B. oleracea var. capitata, five from cauliflower (B. oleracea var. botrytis, two from canola (B. napus, one from broccoli (B. oleracea var. italica, one from Chinese cabbage (B. chinensis, one from kohlrabi (B. oleracea var. gongylodes and two from radish (Raphanus sativus. The pathogenicity of the bacterium

  7. Colonization of cauliflower blossom (Brassica oleracea) by Xanthomonas campestris pv. campestris, via flies (Calliphora vomitoria) can result in seed infestation

    NARCIS (Netherlands)

    Wolf, van der J.M.; Zouwen, van der P.S.

    2010-01-01

    Inoculation of cauliflower blossom with Xanthomonas campestris pv. campestris (Xcc), by brush or pollination with blue bottle flies (Calliphora vomitoria) as a vector, can result in seed infestation. Two years of poly-tunnel experiments with fly inoculation of cauliflower has shown that in approxima

  8. Flower infection of Brassica oleracea with Xanthomonas campestris pv. campestris results in high levels of seed infection

    NARCIS (Netherlands)

    Wolf, van der J.M.; Zouwen, van der P.S.; Heijden, van der L.

    2013-01-01

    During seed production, Brassica seed may become infected with Xanthomonas campestris pv. campestris after systemic colonization of plants upon leaf infection, or alternatively, after flower infection. Polytunnel experiments were conducted in 2007 and 2008 to study the relative importance of these c

  9. Reaction of peach tree genotypes to bacterial leaf spot caused by Xanthomonas arboricola pv. prunis Reação de genótipos de pessegueiro a mancha foliar causada por Xanthomonas arboricola pv. pruni

    Directory of Open Access Journals (Sweden)

    José Gilberto Sousa Medeiros

    2011-02-01

    Full Text Available Bacterial leaf spot (BLS, caused by Xanthomonas arboricola pv. pruni, is one of the most important diseases in Brazilian peach [Prunus persica (L. Batsch] orchards and all over the world. The main objective of this study was to evaluate for BLS sensitivity of peach genotypes. Evaluations of thirty genotypes were carried out during the onset of the disease, for incidence, severity and defoliation, in field conditions. Pearson's correlations between the percentage of defoliation and leaf severity rating were performed. Genotypes 'Conserva 985', 'Conserva 871', 'Conserva 1129', and 'Tropic Snow', as resistance sources, and 'Conserva 1153', 'Bonão', 'Conserva 1125', and 'Atenas', as susceptible to BLS, were submitted to detached-leaf bioassay and greenhouse evaluation. The peach genotypes showed different reactions to the BLS, and none was immune to the pathogen. 'Conserva 985' and 'Conserva 1129' confirmed resistance responsiveness while 'Conserva 1153', 'Conserva 1125' and 'Atenas' were found susceptible for the detached-leaf bioassay.A bacteriose foliar causada por Xanthomonas arboricola pv. pruni é uma das mais importantes doenças do pessegueiro [Prunus persica (L. Batsch] no Brasil e no mundo. Avaliou-se a sensibilidade de genótipos de pessegueiro a X. arboricola pv. pruni. Trinta genótipos foram avaliados em campo, quanto à incidência, severidade e desfolha causada pela bactéria. Calculou-se a correlação entre desfolha e severidade da doença. A partir dos resultados obtidos em campo, foram selecionados quatro genótipos resistentes ('Conserva 985', 'Conserva 871', 'Conserva 1129' e 'Tropic Snow' e quatro suscetíveis ('Conserva 1153', 'Bonão', 'Conserva 1125' e 'Atenas' para serem novamente avaliados pelo bioensáio com folhas destacadas e em casa de vegetação. Os genótipos diferiram quanto a reação ao patógeno, não sendo observada imunidade. Confirmou-se a resistência para 'Conserva 985' e 'Conserva 1129' e a

  10. Meio semi-seletivo para isolamento de Xanthomonas campestris pv. viticola

    OpenAIRE

    Peixoto Ana Rosa; Mariano Rosa de Lima Ramos; Viana Ivanise de Oliveira

    2006-01-01

    O cancro bacteriano causado por Xanthomonas campestris pv. viticola é a fitobacteriose mais importante da videira no Submédio São Francisco. O isolamento de X. campestris pv. viticola de tecidos vegetais infectados é dificultado pela presença de contaminantes bacterianos, entre os quais Microbacterium barkeri. Objetivando-se a formulação de meio de cultura semi-seletivo, 22 isolados de X. campestris pv. viticola foram testados com relação a 30 antibióticos. O meio semi-seletivo NYDAM (extrato...

  11. Establishment of an inducing medium for type III effector secretion in Xanthomonas campestris pv. campestris

    Directory of Open Access Journals (Sweden)

    Guo-Feng Jiang

    2013-09-01

    Full Text Available It is well known that the type III secretion system (T3SS and type III (T3 effectors are essential for the pathogenicity of most bacterial phytopathogens and that the expression of T3SS and T3 effectors is suppressed in rich media but induced in minimal media and plants. To facilitate in-depth studies on T3SS and T3 effectors, it is crucial to establish a medium for T3 effector expression and secretion. Xanthomonas campestris pv. campestris (Xcc is a model bacterium for studying plant-pathogen interactions. To date no medium for Xcc T3 effector secretion has been defined. Here, we compared four minimal media (MME, MMX, XVM2, and XOM2 which are reported for T3 expression induction in Xanthomonas spp. and found that MME is most efficient for expression and secretion of Xcc T3 effectors. By optimization of carbon and nitrogen sources and pH value based on MME, we established XCM1 medium, which is about 3 times stronger than MME for Xcc T3 effectors secretion. We further optimized the concentration of phosphate, calcium, and magnesium in XCM1 and found that XCM1 with a lower concentration of magnesium (renamed as XCM2 is about 10 times as efficient as XCM1 (meanwhile, about 30 times stronger than MME. Thus, we established an inducing medium XCM2 which is preferred for T3 effector secretion in Xcc.

  12. Crystal structure of the YajQ-family protein XC_3703 from Xanthomonas campestris pv. campestris.

    Science.gov (United States)

    Zhao, Zhixin; Wu, Zhen; Zhang, Jun

    2016-09-01

    As an important bacterial second messenger, bis-(3',5')-cyclic diguanylate (cyclic di-GMP or c-di-GMP) has been implicated in numerous biological activities, including biofilm formation, motility, survival and virulence. These processes are manipulated by the binding of c-di-GMP to its receptors. XC_3703 from the plant pathogen Xanthomonas campestris pv. campestris, which belongs to the YajQ family of proteins, has recently been identified as a potential c-di-GMP receptor. XC_3703, together with XC_2801, functions as a transcription factor activating virulence-related genes, which can be reversed by the binding of c-di-GMP to XC_3703. However, the structural basis of how c-di-GMP regulates XC_3703 remains elusive. In this study, the structure of XC_3703 was determined to 2.1 Å resolution using the molecular-replacement method. The structure of XC_3703 consists of two domains adopting the same topology, which is similar to that of the RNA-recognition motif (RRM). Arg65, which is conserved among the c-di-GMP-binding subfamily of the YajQ family of proteins, together with Phe80 in domain II, forms a putative c-di-GMP binding site. PMID:27599864

  13. Crystal structure of the YajQ-family protein XC_3703 from Xanthomonas campestris pv. campestris.

    Science.gov (United States)

    Zhao, Zhixin; Wu, Zhen; Zhang, Jun

    2016-09-01

    As an important bacterial second messenger, bis-(3',5')-cyclic diguanylate (cyclic di-GMP or c-di-GMP) has been implicated in numerous biological activities, including biofilm formation, motility, survival and virulence. These processes are manipulated by the binding of c-di-GMP to its receptors. XC_3703 from the plant pathogen Xanthomonas campestris pv. campestris, which belongs to the YajQ family of proteins, has recently been identified as a potential c-di-GMP receptor. XC_3703, together with XC_2801, functions as a transcription factor activating virulence-related genes, which can be reversed by the binding of c-di-GMP to XC_3703. However, the structural basis of how c-di-GMP regulates XC_3703 remains elusive. In this study, the structure of XC_3703 was determined to 2.1 Å resolution using the molecular-replacement method. The structure of XC_3703 consists of two domains adopting the same topology, which is similar to that of the RNA-recognition motif (RRM). Arg65, which is conserved among the c-di-GMP-binding subfamily of the YajQ family of proteins, together with Phe80 in domain II, forms a putative c-di-GMP binding site.

  14. Meio semi-seletivo para isolamento de Xanthomonas campestris pv. viticola

    Directory of Open Access Journals (Sweden)

    Peixoto Ana Rosa

    2006-01-01

    Full Text Available O cancro bacteriano causado por Xanthomonas campestris pv. viticola é a fitobacteriose mais importante da videira no Submédio São Francisco. O isolamento de X. campestris pv. viticola de tecidos vegetais infectados é dificultado pela presença de contaminantes bacterianos, entre os quais Microbacterium barkeri. Objetivando-se a formulação de meio de cultura semi-seletivo, 22 isolados de X. campestris pv. viticola foram testados com relação a 30 antibióticos. O meio semi-seletivo NYDAM (extrato de carne 3, peptona 5, glicose 10, extrato de levedura 5, ágar 18 e ampicilina 0,1 em g L-1 inibiu M. barkeri e bactérias fitopatogênicas podendo ser utilizado para isolar X. campestris pv. viticola de hospedeiros com infecção natural em campo.

  15. 柰李细菌性黑斑病菌侵染过程研究%INFECTION PROCESS OF Xanthomonas arboricola pv. pruni ON NAI PLUM (Prunus salicina var. cordata )

    Institute of Scientific and Technical Information of China (English)

    戴良英; 高必达

    2001-01-01

    @@ The bacterial spot on Nai plum caused by Xanthomonas arboricola pv. pruni is an important disease in Hu nan Province, causing a considerable yield loss. Studies were carried out on this disease, such as field investiga tion on occurrence and development and integrated control. In this paper we report the fine structure study of the diseased tissues.

  16. STANDARDIZATION OF METHODOLOGY FOR STUDYING PATHOGENECITY OF XANTHOMONAS CAMPESTRIS PV ORYZAE TO RICE

    OpenAIRE

    Jaya Bhagat*, P Shukla and PK Mishra

    2013-01-01

    Rice is the most important food crop of India and its production has increased significantly during last few years. However, Infection of Xanthomonas campestris pv. Oryzae considerably decrease its productivity. It is important to study pathogenecity of causative organism before any defense strategy is decided. Present paper deals with standardization of technology for microscopic study of pathogen.

  17. Insights into the Extracytoplasmic Stress Response of Xanthomonas campestris pv. campestris: Role and Regulation of σE-Dependent Activity ▿ ‡

    OpenAIRE

    Bordes, Patricia; Lavatine, Laure; Phok, Kounthéa; Barriot, Roland; Boulanger, Alice; Castanié-Cornet, Marie-Pierre; Déjean, Guillaume; Lauber, Emmanuelle; Becker, Anke; Arlat, Matthieu; Gutierrez, Claude

    2010-01-01

    Xanthomonas campestris pv. campestris is an epiphytic bacterium that can become a vascular pathogen responsible for black rot disease of crucifers. To adapt gene expression in response to ever-changing habitats, phytopathogenic bacteria have evolved signal transduction regulatory pathways, such as extracytoplasmic function (ECF) σ factors. The alternative sigma factor σE, encoded by rpoE, is crucial for envelope stress response and plays a role in the pathogenicity of many bacterial species. ...

  18. The influence of a modified lipopolysaccharide O-antigen on the biosynthesis of xanthan in Xanthomonas campestris pv. campestris B100

    OpenAIRE

    Steffens, Tim; Vorhölter, Frank-Jörg; Giampà, Marco; Hublik, Gerd; Pühler, Alfred; Niehaus, Karsten

    2016-01-01

    Background The exopolysaccharide xanthan is a natural product which is extensively used in industry. It is a thickening agent in many fields, from oil recovery to the food sector. Xanthan is produced by the Gram negative bacterium Xanthomonas campestris pv. campestris (Xcc). We analyzed the lipopolysaccharide (LPS) of three mutant strains of the Xcc wild type B100 to distinguish if the xanthan production can be increased when LPS biosynthesis is affected. Results The Xcc B100 O-antigen (OA) i...

  19. Promoter analysis of the Xanthomonas campestris pv. campestris gum operon directing biosynthesis of the xanthan polysaccharide.

    OpenAIRE

    Katzen, F; Becker, A.; Zorreguieta, A; Pühler, A; Ielpi, L

    1996-01-01

    The Xanthomonas campestris gum gene cluster is composed of 12 genes designated gumB, -C, -D, -E, -F, -G, -H, -I, -J, -K, -L, and -M. The transcriptional organization of this gene cluster was analyzed by the construction of gum-lacZ transcriptional fusions in association with plasmid integration mutagenesis. This analysis, coupled with primer extension assays, indicated that the gum region was mainly expressed as an operon from a promoter located upstream of the first gene, gumB.

  20. Limpeza clonal de mudas de videira infectadas por Xanthomonas campestris pv. viticola Clonal cleaning of grapevine plants infected by Xanthomonas campestris pv. viticola

    OpenAIRE

    Adriano Márcio Freire Silva; Natoniel Franklin de Melo; Elineide Barbosa de Souza; Ângela Katiusia Coelho; Rosa de Lima Ramos Mariano

    2013-01-01

    O cancro bacteriano da videira é causado por Xanthomonas campestris pv. viticola (Xcv). Visando à limpeza clonal de mudas de 'Red Globe', foram estudados: tamanho ideal de ápices e gemas axilares para cultivo em meio de Galzy modificado (MGM); efeito da termoterapia (38ºC/30 dias); e ação de antibióticos na eliminação de Xcv em videiras infectadas. Os percentuais de contaminação por Xcv e de regeneração foram analisados, e as plantas obtidas foram indexadas em meio ágar nutritivo-dextrose-ext...

  1. Transcriptional reprogramming and phenotypical changes associated with growth of Xanthomonas campestris pv. campestris in cabbage xylem sap.

    Science.gov (United States)

    Dugé de Bernonville, Thomas; Noël, Laurent D; SanCristobal, Magali; Danoun, Saida; Becker, Anke; Soreau, Paul; Arlat, Matthieu; Lauber, Emmanuelle

    2014-09-01

    Xylem sap (XS) is the first environment that xylem phytopathogens meet in planta during the early infection steps. Xanthomonas campestris pv. campestris (Xcc), the causative agent of Brassicaceae black rot, colonizes the plant xylem vessels to ensure its multiplication and dissemination. Besides suppression of plant immunity, Xcc has to adapt its metabolism to exploit plant-derived nutrients present in XS. To study Xcc behaviour in the early infection steps, we used cabbage XS to analyse bacterial growth. Mineral and organic composition of XS were determined. Significant growth of Xcc in XS was allowed by the rapid catabolism of amino acids, sugars and organic acids, and it was accompanied by the formation of biofilm-like structures. Transcriptome analysis of Xcc cultivated in XS using cDNA microarrays revealed a XS-specific transcriptional reprogramming compared to minimal or rich media. More specifically, up-regulation of genes encoding transporters such as TonB-dependent transporters (TBDTs), that could be associated with nutrient acquisition and detoxification, was observed. In agreement with the aggregation phenotype, expression of genes important for twitching motility and adhesion was up-regulated in XS. Taken together, our data show specific responses of Xcc to colonization of cabbage XS that could be important for the pathogenesis process and establish XS as a model medium to study mechanisms important for the early infection events. PMID:24784488

  2. The apo structure of sucrose hydrolase from Xanthomonas campestris pv. campestris shows an open active-site groove

    DEFF Research Database (Denmark)

    Champion, Elise; Remaud-Simeon, Magali; Skov, Lars Kobberøe;

    2009-01-01

    Glycoside hydrolase family 13 (GH-13) mainly contains starch-degrading or starch-modifying enzymes. Sucrose hydrolases utilize sucrose instead of amylose as the primary glucosyl donor. Here, the catalytic properties and X-ray structure of sucrose hydrolase from Xanthomonas campestris pv. campestr...

  3. Antagonism of yeasts to Xanthomonas campestris pv. campestris on cabbage phylloplane in field Antagonismo de leveduras a Xanthomonas campestris pv. campestris no filoplano de repolho em condições de campo

    Directory of Open Access Journals (Sweden)

    Sayonara M.P. Assis

    1999-07-01

    Full Text Available Twenty yeast isolates, obtained from cabbage phylloplane, were evaluated for antagonistic activity against Xanthomonas campestris pv. campestris, in field. Plants of cabbage cv. Midori were pulverized simultaneously with suspensions of antagonists and pathogen. After 10 days, plants were evaluated through percentage of foliar area with lesions. Percentage of disease severity reduction (DSR% was also calculated. Yeast isolates LR32, LR42 and LR19 showed, respectively, 72, 75 and 79% of DSR. These antagonists were tested in seven different application periods in relation to pathogen inoculation (T1=4 d before; T2=simultaneously; T3=4 d after; T4=4 d before + simultaneously; T5=4 d after + simultaneously; T6=4 d before + 4 d after; T7=4 d before + simultaneously + 4 d after. The highest DSRs were showed by LR42 (71%, LR42 (67%, LR35 (69% and LR19 (68% in the treatments T7, T4, T5 and T6, which significantly differed from the others. The same yeast antagonists were also tested for black rot control using different cabbage cultivars (Fuyutoyo, Master-325, Matsukaze, Midori, Sekai I and Red Winner. The DSRs varied from 58 to 61%, and there was no significant difference among cultivars.Vinte isolados de leveduras, obtidos a partir do filoplano de repolho foram avaliados pela atividade antagônica contra Xanthomonas campestris pv. campestris, em condições de campo. Plantas de repolho cv. Midori foram pulverizadas simultaneamente com suspensões do antagonista e do patógeno. Após 10 dias, as plantas foram avaliadas através da porcentagem de área foliar infectada. A porcentagem de redução da severidade da doença (DSR%, também foi calculada. Os isolados de leveduras LR32, LR42 e LR19 apresentaram, respectivamente, 72, 75 e 79% de DSR. Estes isolados foram testados em sete diferentes períodos de aplicação dos antagonistas em relação a inoculação do patógeno. (T1=4d antes; T2=simultaneamente; T3=4 d após; T4=4 d antes + simultaneamente; T5

  4. Conformational changes associated with the binding of zinc acetate at the putative active site of XcTcmJ, a cupin from Xanthomonas campestris pv. campestris

    OpenAIRE

    Axelrod, Herbert L; Kozbial, Piotr; McMullan, Daniel; Krishna, S. Sri; Miller, Mitchell D.; Abdubek, Polat; Acosta, Claire; Astakhova, Tamara; Carlton, Dennis; Caruthers, Jonathan; Chiu, Hsiu-Ju; Clayton, Thomas; Deller, Marc C.; Duan, Lian; Elias, Ylva

    2009-01-01

    In the plant pathogen Xanthomonas campestris pv. campestris, the product of the tcmJ gene, XcTcmJ, encodes a protein belonging to the RmlC family of cupins. XcTcmJ was crystallized in a monoclinic space group (C2) in the presence of zinc acetate and the structure was determined to 1.6 Å resolution. Previously, the apo structure has been reported in the absence of any bound metal ion [Chin et al. (2006 ▶), Proteins, 65, 1046–1050]. The most significant difference between the apo structure and ...

  5. Produção e caracterização de anticorpos policlonais contra Xanthomonas campestris pv. viticola Production and characterization of polyclonal antibodies against Xanthomonas campestris pv. viticola

    OpenAIRE

    João Sebastião de Paula Araujo; Fábio Bueno dos Reis Junior; Geraldo Baeta Cruz; Bruno Cardoso de Oliveira; Charles Frederick Robbs; Raul de Lucena Duarte Ribeiro; José Carlos Polidoro

    2005-01-01

    O objetivo deste trabalho foi a produção de anticorpos policlonais contra Xanthomonas campestris pv. viticola e sua caracterização pelo método Elisa indireto. Os resultados apontaram a qualidade dos anticorpos policlonais produzidos, os quais mostraram-se altamente reativos e específicos para o patovar com potencial para ser empregado no diagnóstico da doença e em programas de certificação.The objective of this work was to produce polyclonal antibodies against Xanthomonas campestris pv. vitic...

  6. Scientific Opinion on the pest categorisation of Xanthomonas campestris pv. vesicatoria (Doidge Dye

    Directory of Open Access Journals (Sweden)

    EFSA Panel on Plant Health (PLH

    2014-06-01

    Full Text Available The European Commission requested the EFSA Panel on Plant Health to perform the pest categorisation for Xanthomonas campestris pv. vesicatoria, which is the causal agent of bacterial spot of tomato and pepper. X. campestris pv. vesicatoria is not a single taxonomic entity, and four separate species have been described:    X. vesicatoria, X. euvesicatoria, X. perforans and X. gardneri. These organisms can be accurately identified based on a range of discriminative methods. Detection methods are available for seeds. Among the four species described within X. campestris pv. vesicatoria, all except X. gardneri were reported to be present in the EU territory. The host plants (tomato and pepper are cultivated throughout Europe and conditions are conducive to disease development in open fields in southern Europe and in greenhouses. The disease causes a range of symptoms on aerial parts of plants including fruits. Contaminated seeds and transplants are responsible for long-distance dissemination of the pathogen. Control is mainly based on prevention and exclusion. Extraction of seeds from fruit debris using fermentation and acid treatments and thermotherapy treatments were shown to be effective in reducing the bacterial load in seed lots. No methods and chemical control agents are available that effectively control xanthomonads in infected crops. Although no recent data are available on economic losses caused by these pathogens in the EU, the organisms are considered important bacterial pathogens of tomato and pepper. Infections resulting in up to 30 % losses have been reported. Xanthomonads causing bacterial spot of tomato and pepper meet all criteria defined in International Standard for Phytosanitary Measures (ISPM 21 and they also meet all ISPM 11 criteria, although X. vesicatoria, X. euvesicatoria and X. perforans are present in the EU territory.

  7. Identificação de potenciais plantas hospedeiras alternativas de Xanthomonas campestris pv. viticola

    OpenAIRE

    Morgana Mateus Santos; Ana Rosa Peixoto; Esmailly de Sousa Pessoa; Marco Aurélio Gama; Rosa de Lima Ramos Mariano; Maria Angélica Guimarães Barbosa; Cristiane Domingos da Paz

    2014-01-01

    Este estudo teve como objetivo identificar possíveis hospedeiras alternativas de Xanthomonas campestris pv. viticola (Xcv), visando a fornecer subsídios para o manejo do cancro bacteriano da videira. Vinte e seis espécies vegetais foram inoculadas artificialmente com o isolado Xcv3 e mantidas em condições de casa de vegetação, sendo avaliada a evolução sintomatológica da doença, como manchas necróticas angulares e lesões nas nervuras. O Xcv3 foi reisolado a partir de cada hospedeiro alternati...

  8. Sobrevivência de Xanthomonas campestris pv. viticola em tecido infectado de videira

    OpenAIRE

    Adriano Márcio Freire Silva; Erianne Fonseca de Menezes; Elineide Barbosa de Souza; Natoniel Franklin de Melo; Rosa de Lima Ramos Mariano

    2012-01-01

    Tecidos de plantas infectados constituem uma importante fonte de inóculo primário para fitobacterioses. O objetivo deste trabalho foi investigar a sobrevivência de Xanthomonas campestris pv. viticola (Xcv), agente do cancro bacteriano da videira, em tecidos infectados na superfície do solo e durante a compostagem de restos de poda. Mudas de videira 'Festival' foram inoculadas com mutante resistente à rifampicina Xcv2Rif e mantidas em casa de vegetação até apresentarem alta severidade da doenç...

  9. Limpeza clonal de mudas de videira infectadas por Xanthomonas campestris pv. viticola

    OpenAIRE

    Adriano Márcio Freire Silva; Natoniel Franklin de Melo; Elineide Barbosa de Souza; Ângela Katiusia Coelho; Rosa de Lima Ramos Mariano

    2013-01-01

    O cancro bacteriano da videira é causado por Xanthomonas campestris pv. viticola (Xcv). Visando à limpeza clonal de mudas de 'Red Globe', foram estudados: tamanho ideal de ápices e gemas axilares para cultivo em meio de Galzy modificado (MGM); efeito da termoterapia (38ºC/30 dias); e ação de antibióticos na eliminação de Xcv em videiras infectadas. Os percentuais de contaminação por Xcv e de regeneração foram analisados, e as plantas obtidas foram indexadas em meio ágar nutritivo-dextrose-ext...

  10. Comportamento reológico de xantana produzida por Xanthomonas arboricola pv pruni para aplicação em fluido de perfuração de poços de petróleo Rheological behaviour of xanthan produced by Xanthomonas arboricola pv pruni for application in fluid of oil well perforation

    Directory of Open Access Journals (Sweden)

    Caroline D. Borges

    2009-06-01

    Full Text Available O trabalho objetivou avaliar xantanas produzidas por Xanthomonas arboricola pv pruni como viscosificante de fluido para aplicação na perfuração de poços de petróleo, comparando-as com três amostras comerciais utilizadas para este fim. Para isto, a viscosidade de soluções aquosas e salinas (NaCl, KCl e CaCl2 das diferentes xantanas, em distintas temperaturas (25, 45, 65 e 80 ºC, foi determinada em reômetro. Os parâmetros reológicos índice de consistência (K e o índice de fluxo (n foram obtidos pelo ajuste do modelo de Ostwald-de-Waelle. A força gel (G0, G10 e G30 foi determinada em viscosímetro, e a concentração de sais monovalentes (sódio e potássio e divalentes (cálcio e magnésio foi determinada em fotômetro de chama e em espectrômetro de absorção atômica, respectivamente. De uma forma geral, os resultados obtidos neste estudo mostram que as xantanas produzidas pelo patovar pruni, Xp 106-600 e Xp 115-600, por conterem baixa concentração de sais, apresentaram potencial para aplicação em fluido de perfuração de poços de petróleo, quando utilizada solução salina. Já os polímeros comerciais apresentaram melhores resultados quando utilizados em solução aquosa, pois continham alta concentração de sais.The aim of this work was to evaluate xanthans produced by Xanthomonas arboricola pv pruni to be used for increasing the viscosity of fluids applied in the perforation of oil wells, which were compared with three commercial samples. In order to do that, the viscosity of aqueous and saline solutions (NaCl, KCl and CaCl2 from different xanthans, at different temperatures (25, 45, 65 and 80 ºC, was determined in a rheometer. The rheological parameters consistency index (K and flow behaviour index (n were obtained by adjusting the data with the Ostwald-de-Waelle model. Gel strength (G0, G10 e G30 was determined in a viscometer, and the concentration of monovalent (sodium and potassium and divalent salts (calcium

  11. Susceptibility of Bean Genotypes to Xanthomonas campestris pv. phaseoli in Greenhouse Conditions

    Directory of Open Access Journals (Sweden)

    Biljana Todorović

    2008-01-01

    Full Text Available Plants of 17 bean genotypes were evaluated under greenhouse conditions for their reaction to X. campestris pv. phaseoli, the causal agent of common blight of beans, following leaf-spray inoculation with bacterial suspension (108 cfu/ml. The plants were evaluated based on the number of leaf lesions, and the disease severity index (DSI was calculated.The evaluated genotypes showed various levels of susceptibility to X. campestris pv. phaseoli strain VS-1. The results of both experiments showed that the cultivar Oreol was the most resistant. The genotypes: KB 142, HR-45, Tisa and Panonski tetovac also showed low susceptibility with DSI values in the first trial ranging from 2.27 to 3.60. The same genotypes, with the exception of Panonski tetovac, were also categorized as low-susceptible to the bacterium in the second experiment, having the DSI values between 2.27 and 3.60. Most genotypes (Slavonski žutozeleni, Zlatko, Biser, Sremac, Naya Nayahit were categorized as susceptible in the first experiment, including Panonski tetovac in the second one, while the genotypes Dvadesetica, Prelom and Oplenac displayed the highest susceptibility in both trials.

  12. Limpeza clonal de mudas de videira infectadas por Xanthomonas campestris pv. viticola Clonal cleaning of grapevine plants infected by Xanthomonas campestris pv. viticola

    Directory of Open Access Journals (Sweden)

    Adriano Márcio Freire Silva

    2013-03-01

    Full Text Available O cancro bacteriano da videira é causado por Xanthomonas campestris pv. viticola (Xcv. Visando à limpeza clonal de mudas de 'Red Globe', foram estudados: tamanho ideal de ápices e gemas axilares para cultivo em meio de Galzy modificado (MGM; efeito da termoterapia (38ºC/30 dias; e ação de antibióticos na eliminação de Xcv em videiras infectadas. Os percentuais de contaminação por Xcv e de regeneração foram analisados, e as plantas obtidas foram indexadas em meio ágar nutritivo-dextrose-extrato de levedura-ampicilina (NYDAM, seguindo-se teste de patogenicidade. O cultivo de explantes com 3 mm possibilitou a obtenção de plantas livres da bactéria, com regeneração 14,3 vezes maior que explantes com 1 mm. A termoterapia de mudas infectadas, associada ao cultivo in vitro, não eliminou o patógeno. O cultivo de explantes com 10 mm, durante 40 dias em MGM + cefotaxima (300 mg L-1, proporcionou limpeza clonal das mudas. A indexação de plantas de videira regeneradas in vitro, quanto à infecção por Xcv utilizando NYDAM, seguida de teste de patogenicidade, é uma alternativa econômica e eficiente para produção de mudas de alta qualidade fitossanitária.Bacterial canker is caused by Xanthomonas campestris pv. viticola (Xcv. In order to eliminate Xcv from 'Red Globe' plants it was studied: optimal size of meristem tips and axillary buds for cultivation in modified Galzy's medium (MGM; effects of thermotherapy (38ºC/30 days; and action of antibiotics in the elimination of Xcv in infected grapevines. The percentages of contamination by Xcv and regeneration were analyzed and plants obtained were indexed using the semi-selective culture medium nutrient agar-dextrose-yeast extract-ampicilin (NYDAM followed by a pathogenicity test. The cultivation of 3 mm explants permitted to obtain plants free of bacteria with regeneration 14.3 times higher than 1 mm explants. The thermotherapy of infected plants associated to the in vitro culture

  13. Pathogenicity of EPS-deficient mutants (gumB-, gumD and gumE - ) of Xanthomonas campestris pv. campestris

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Three extracellular polysaccharide (EPS) -deficient mutants of the pathogen Xanthomonas campestris pv. campestris, gumB - , gumD - and gumE- were constructed by Tn5 gusA5 mutagenesis in this study. The results of pathogenicity bioassay showed that three mutants had the obviously decreased pathogenicity on radish ( Raphanus sativus L. ) leaves. Because dead body of the bacteria still caused symptoms, it seemed that some unknown factors on the bac terial cell surface might play certain roles in the pathogenicity of the pathogen. The extracted raw EPS could lead to the chlorotic symptom on radish leaves, and its virulence was increased with the increase of EPS dosage, which suggested that EPS was a main component that caused the danage on radish leaves.

  14. EVALUATION OF ANTI-BACTERIAL ACTIVITY OF LOCAL FLORA OF BUNDELKHAND REGION OF JHANSI- INDIA AGAINST PLANT PATHOGENIC BACTERIA Xanthomonas campestris pv. campestris

    Directory of Open Access Journals (Sweden)

    Sazada Siddiqui

    2014-05-01

    Full Text Available Twenty plants namely Acacia nilotica (L. Willd.ex delil, Ageratum conyzoides Linn, Boerhaavia diffusa Linn., Cynodon dactylon (L. Pers, Cleome viscosa L, Datura stramonium Linn, Euphorbia hirta Linn, Ficus benghalensis Linn, Hyptis suaveolens (Linn poit, Hibiscus rosa-sinensis Linn, Jatropha gossypifolia Linn, Phyllanthus niruri webster, Prosopis juliflora, Polyalthia longifolia, Sida cordifolia, Tephrosia purpurea (Linn. Pers, Tridax procumbens Linn, Zizyphus jujube Linn, Solanum nigrum Linn, were collected from different localities and screened for their antibacterial activity against phytopathogenic bacterium, Xanthomonas campestris pv. campestris. Among all the tested species, nine plant species viz Acacia nilotica, Ageratum conyzoied, Boerhaavia diffusa, Cleome viscose, Datura stramonium, Euphorbia hirta, Hyptis suaveolens, Hibiscus rosa sinensis, Prosopis juliflora and Tridex procumbens showed medium to light antibacterial activity against the selected pathogens. Significant antibacterial activity was observed in aqueous extracts of Prosopsis juliflora, Hyptis suaveolens, Euphorbia hirta and Acacia nilotica

  15. Molecular characterization of Brazilian strains of Xanthomonas campestris pv. viticola by rep-PCR fingerprinting Caracterização molecular de isolados brasileiros de Xanthomonas campestris pv. viticola através de rep-PCR

    OpenAIRE

    Loiselene C. Trindade; Mirtes F Lima; Marisa A.S.V. Ferreira

    2005-01-01

    Bacterial canker of grapevine (Vitis vinifera), caused by Xanthomonas campestris pv. viticola was first detected in Brazil in 1998, affecting grapevines in the São Francisco river basin, state of Pernambuco. The disease was also reported in Juazeiro, Bahia and later in Piauí and Ceará. Due to its limited geographical distribution and relatively recent detection in Brazil, very little is known about the pathogen's biology and diversity. Repetitive DNA based-PCR (rep-PCR) profiles were generate...

  16. Unusual structure of the tonB-exb DNA region of Xanthomonas campestris pv. campestris: tonB, exbB, and exbD1 are essential for ferric iron uptake, but exbD2 is not.

    Science.gov (United States)

    Wiggerich, H G; Klauke, B; Köplin, R; Priefer, U B; Pühler, A

    1997-01-01

    The nucleotide sequence of a 3.6-kb HindIII-SmaI DNA fragment of Xanthomonas campestris pv. campestris revealed four open reading frames which, based on sequence homologies, were designated tonB, exbB, exbD1, and exbD2. Analysis of translational fusions to alkaline phosphatase and beta-galactosidase confirmed that the TonB, ExbB, ExbD1, and ExbD2 proteins are anchored in the cytoplasmic membrane. The TonB protein of X. campestris pv. campestris lacks the conserved (Glu-Pro)n and (Lys-Pro)m repeats but harbors a 13-fold repeat of proline residues. By mutational analysis, the tonB, exbB, and exbD1 genes were shown to be essential for ferric iron import in X. campestris pv. campestris. In contrast, the exbD2 gene is not involved in the uptake of ferric iron. PMID:9371459

  17. Limpeza clonal de mudas de videira infectadas por Xanthomonas campestris pv. viticola

    Directory of Open Access Journals (Sweden)

    Adriano Márcio Freire Silva

    2013-03-01

    Full Text Available O cancro bacteriano da videira é causado por Xanthomonas campestris pv. viticola (Xcv. Visando à limpeza clonal de mudas de 'Red Globe', foram estudados: tamanho ideal de ápices e gemas axilares para cultivo em meio de Galzy modificado (MGM; efeito da termoterapia (38ºC/30 dias; e ação de antibióticos na eliminação de Xcv em videiras infectadas. Os percentuais de contaminação por Xcv e de regeneração foram analisados, e as plantas obtidas foram indexadas em meio ágar nutritivo-dextrose-extrato de levedura-ampicilina (NYDAM, seguindo-se teste de patogenicidade. O cultivo de explantes com 3 mm possibilitou a obtenção de plantas livres da bactéria, com regeneração 14,3 vezes maior que explantes com 1 mm. A termoterapia de mudas infectadas, associada ao cultivo in vitro, não eliminou o patógeno. O cultivo de explantes com 10 mm, durante 40 dias em MGM + cefotaxima (300 mg L-1, proporcionou limpeza clonal das mudas. A indexação de plantas de videira regeneradas in vitro, quanto à infecção por Xcv utilizando NYDAM, seguida de teste de patogenicidade, é uma alternativa econômica e eficiente para produção de mudas de alta qualidade fitossanitária.

  18. Establishment of an in vitro system for studies on the induced resistance of cotton to Xanthomonas campestris pv. malvacearum Estabelecimento de sistema in vitro para estudos da resistência induzida à Xanthomonas campestris pv. malvacearum em algodoeiro

    Directory of Open Access Journals (Sweden)

    ADILSON KENJI KOBAYASHI

    2000-04-01

    Full Text Available An in vitro system for studying the resistance response of cotton (Gossypium hirsutum L. to Xanthomonas campestris pv. malvacearum was investigated. Cell suspension cultures, established from hypocotyl-derived callus of cotton cultivar 101-102B, were treated with bacterial extracellular polysaccharides (EPS extracted from the incompatible race 18 of X. campestris pv. malvacearum. EPS at 600 mug/mL caused pronounced darkening of the suspension cultures, as indicative of cell death, 48 hours after incubation. Protein electrophoresis analysis of the time course of EPS-treated cells showed differential accumulation of several protein bands after 12-24 hours. The time course of protein accumulation and cell death was consistent with an elicitor-mediated hypersensitive response.Desenvolveu-se um sistema in vitro para estudar a resistência do algodoeiro (Gossypium hirsutum L. à Xanthomonas campestris pv. malvacearum. Foram utilizados calos originados a partir de hipocótilos da cultivar de algodoeiro 101-102B para estabelecer culturas de células em suspensão, as quais foram tratadas com polissacarídeos extracelulares bacterianos (EPS extraídos da raça incompatível 18 de X. campestris pv. malvacearum. O tratamento com EPS, na concentração de 600 mig/mL, causou acentuado escurecimento das culturas em suspensão, indicativo de morte celular, 48 horas após a incubação. A análise temporal do perfil eletroforético de proteínas extraídas das células tratadas com EPS mostrou um acúmulo diferencial de diversas proteínas após 12-24 horas. O acúmulo de proteínas e a morte celular ao longo do período estudado foram consistentes com um padrão de resposta de hipersensibilidade causada por elicitores.

  19. Sobrevivência de Xanthomonas campestris pv. viticola em tecido infectado de videira

    Directory of Open Access Journals (Sweden)

    Adriano Márcio Freire Silva

    2012-09-01

    Full Text Available Tecidos de plantas infectados constituem uma importante fonte de inóculo primário para fitobacterioses. O objetivo deste trabalho foi investigar a sobrevivência de Xanthomonas campestris pv. viticola (Xcv, agente do cancro bacteriano da videira, em tecidos infectados na superfície do solo e durante a compostagem de restos de poda. Mudas de videira 'Festival' foram inoculadas com mutante resistente à rifampicina Xcv2Rif e mantidas em casa de vegetação até apresentarem alta severidade da doença. No primeiro experimento, ramos fragmentados e folhas inteiras destas plantas foram acondicionados em bolsas de malha plástica e colocados na superfície de microparcelas. No segundo experimento, ramos e folhas fragmentados foram acondicionados em bolsas plásticas e depositados no interior de pilhas de compostagem de restos de poda de videira. A sobrevivência de Xcv2Rif em tecidos infectados foi monitorada a intervalos de 8 e 10 dias a partir do início do primeiro e segundo experimentos, respectivamente. No primeiro experimento, foi também avaliada a decomposição de tecidos, e no segundo, as curvas de temperatura das pilhas, conteúdo de fenóis e microbiota antagonista a Xcv2Rif. O patógeno sobreviveu em altas populações até 80 dias em tecidos infectados na superfície do solo. A compostagem eliminou Xcv2Rif de restos culturais em 10 dias, devido às altas temperaturas, liberação de compostos fenólicos e antagonismo microbiano. Concluindo, em tecidos infectados de videira Xcv sobrevive na superfície do solo por, pelo menos, 80 dias mas é eliminada pela compostagem em 10 dias.

  20. Genotipos de frijol (Phaseolus Vulgaris l. resistentes a Xanthomonas campestris pv. phaseoli de Mexico

    Directory of Open Access Journals (Sweden)

    Rosa Navarrete

    2000-01-01

    Full Text Available Genotipos de frijol (Phaseolus vulgaris L. resistentes a Xanthomonas campestris pv. phaseoli de México. Durante 1995 se evaluó la reacción de genotipos de frijol de diversos origenes a Xcp, bajo condiciones de invernadero en el Campo Experimental del Valle de México, del INIFAP. Se realizaron tres experimentos con a120, b44 y csiete genotipos de frijol. Las plantas se inocularon por corte con navajas en la etapa V3, a y b con una mezcla de nueve cepas de Xcp y el c, con cada una de siete cepas con diferente grado de patogenicidad. La severidad se evaluó 20 días después de la inoculación, por comparación con una escala visual de nueve grados. Los datos se analizaron bajo un diseño completamente al azar. En a, los genotipos que mostraron reacción de resistencia a Xcp fueron: A 36, A 475, G 5686, G 11867, Harowood, SEA 14, XAN 266, MCD 4012 y REN 27. En b los genotipos resistentes fueron: Sequía Durango, Taylor y XAN 30. En los experimentos anteriores la severidad de la enfermedad mostró una distribución normal, con el máximo número de genotipos en el grado de severidad cinco en a y seis en b. Los resultados obtenidos indican que el uso de mezclas de cepas de bacterias con diferente patogenicidad es eficiente para identificar genotipos de frijol resistentes a Xcp. Los genotipos resistentes identificados en el último experimento, mostraron respuesta diferencial e interacciones genotipo por cepa. REN 27 y SEA 14 mostraron resistencia a las cepas utilizadas

  1. Control of Xanthomonas campestris pv. phaseoli on Bean_Using Copper Compounds and Plant Activator

    Directory of Open Access Journals (Sweden)

    Biljana Todorović

    2006-01-01

    Full Text Available The efficacy of several new formulations of copper compounds, namely Cuprozin 35 WP (copper-oxychloride, Cuproxat (copper-sulphate, Funguran OH (copper-hydroxideand the plant activator Bion(acibenzolar-S-methyl, and their combinations with dithiocarbamates(Dithane M-70 was estimated in controlling Xanthomonas campestris pv. phaseoli (artificial inoculation in field conditions in two localities during 2006. In the locality Zemun, the efficacy of copper compounds ranged from 92.7% to 98.5%. The plant activator Bion 50 WG exhibited similar efficacy (94.4-97.1%. Combinations of Funguran OH and Dithane M-70, applied at different concentrations, also showed high efficacy (98.3-99.3%, as well as the combinations of Bion 50 WG and the other bactericides (95.5-96.8%. There was no significantdifference between the efficacies achieved by the compounds applied individually and their combinations, except Cuproxat, which exhibited decreased efficacy at lower concentration. In the locality Smederevska Palanka, the efficacy of copper compounds was 95.0-98.2%, while Bion achieved 96.8-97.7% efficacy. Combinations of copper-hydroxide(Funguran OH and dithiocarbamates (Dithane M-70 also showed high efficacy (98.1-99.4% but without a significant difference. The efficacy of combinations of Bion and copper-hydroxide, and Bion and mancozeb was 97.9-98.9%. There was no significant difference in the efficacies of the bactericides tested or the efficacies of their combinations in that locality.Our investigation confirmed high efficacy of acibenzolar-S-methyl, which was equal to the efficacy of standard bactericide treatment. This compound therefore offers a very good alternative to conventional chemicals used for controlling bacterial diseases in beans.

  2. Aconitase B is required for optimal growth of Xanthomonas campestris pv. vesicatoria in pepper plants.

    Directory of Open Access Journals (Sweden)

    Janine Kirchberg

    Full Text Available The aerobic plant pathogenic bacterium Xanthomonas campestris pv. vesicatoria (Xcv colonizes the intercellular spaces of pepper and tomato. One enzyme that might contribute to the successful proliferation of Xcv in the host is the iron-sulfur protein aconitase, which catalyzes the conversion of citrate to isocitrate in the tricarboxylic acid (TCA cycle and might also sense reactive oxygen species (ROS and changes in cellular iron levels. Xcv contains three putative aconitases, two of which, acnA and acnB, are encoded by a single chromosomal locus. The focus of this study is aconitase B (AcnB. acnB is co-transcribed with two genes, XCV1925 and XCV1926, encoding putative nucleic acid-binding proteins. In vitro growth of acnB mutants was like wild type, whereas in planta growth and symptom formation in pepper plants were impaired. While acnA, XCV1925 or XCV1926 mutants showed a wild-type phenotype with respect to bacterial growth and in planta symptom formation, proliferation of the acnB mutant in susceptible pepper plants was significantly impaired. Furthermore, the deletion of acnB led to reduced HR induction in resistant pepper plants and an increased susceptibility to the superoxide-generating compound menadione. As AcnB complemented the growth deficiency of an Escherichia coli aconitase mutant, it is likely to be an active aconitase. We therefore propose that optimal growth and survival of Xcv in pepper plants depends on AcnB, which might be required for the utilization of citrate as carbon source and could also help protect the bacterium against oxidative stress.

  3. Development of a New Semiselective Medium for Isolating Xanthomonas campestris pv. manihotis from Plant Material and Soil.

    Science.gov (United States)

    Fessehaie, A; Wydra, K; Rudolph, K

    1999-07-01

    ABSTRACT An effective control for bacterial blight of cassava (Manihot esculenta), caused by Xanthomonas campestris pv. manihotis, requires the use of non-contaminated cuttings and seeds. Using classical agar plating techniques for screening planting material for contamination has not been very successful because of the lack of a reliable semiselective agar medium. The pathogen grows slowly on general plating media and is easily overgrown by saprophytic bacteria during isolation from diseased plants. In an effort to develop a semiselective medium, the utilization of several carbon and nitrogen sources was studied. Results of these tests provided information used to design a basal medium allowing good growth of the target organism while suppressing growth of several common saprophytes. Additional selectivity was achieved by incorporating three antibiotics into the basal medium. The new semiselective agar medium, designated cefazolin trehalose agar (CTA) medium, contained (per liter) 3.0 g of K(2)HPO(4), 1.0 g of NaH(2)PO(4), 0.3 g of MgSO(4).7H(2)O, 1.0 g of NH(4)Cl, 9.0 g of D(+)-trehalose, 1.0 D(+)-glucose, 1.0 g of yeast extract, 0.025 g of cefazolin, 0.0012 g of lincomycin, 0.0025 g of phosphomycin, 0.25 g of cycloheximide, and 14.0 g of agar. In comparison to a starch-based semiselective medium (SXM), plating efficiencies using pure cultures of 10 strains of X. campestris pv. manihotis were significantly higher on CTA, with an average of 85 and 50%, respectively. Likewise, isolation and recovery of X. campestris pv. manihotis from infected cassava leaves and contaminated soil were much higher on CTA than on SXM agar. When X. campestris pv. manihotis occurs in high concentrations in diseased tissue, the standard yeast trehalose glucose agar medium supplemented with 250 mug of cycloheximide per ml appears to be satisfactory. The newly developed CTA medium should prove useful for control strategies to identify and remove infected planting material of cassava, as

  4. Genome wide transcription start sites analysis of Xanthomonas campestris pv. campestris B100 with insights into the gum gene cluster directing the biosynthesis of the exopolysaccharide xanthan.

    Science.gov (United States)

    Alkhateeb, Rabeaa S; Vorhölter, Frank-Jörg; Rückert, Christian; Mentz, Almut; Wibberg, Daniel; Hublik, Gerd; Niehaus, Karsten; Pühler, Alfred

    2016-05-10

    Xanthomonas campestris pv. campestris (Xcc) is the major producer of the exopolysaccharide xanthan, the commercially most important natural polysaccharide of microbial origin. The current work provides deeper insights into the yet uncharacterized transcriptomic features of the xanthan producing strain Xcc-B100. Towards this goal, RNA sequencing of a library based on the selective enrichment of the 5' ends of native transcripts was performed. This approach resulted in the genome wide identification of 3067 transcription start sites (TSSs) that were further classified based on their genomic positions. Among them, 1545 mapped upstream of an actively transcribed CDS and 1363 were classified as novel TSSs representing antisense, internal, and TSSs belonging to previously unidentified genomic features. Analyzing the transcriptional strength of primary and antisense TSSs revealed that in some instances antisense transcription seemed to be initiated at a higher level than its sense counterpart. Mapping the exact positions of TSSs aided in the identification of promoter consensus motifs, ribosomal binding sites, and enhanced the genome annotation of 159 in silico predicted translational start (TLS) sites. The global view on length distribution of the 5' untranslated regions (5'-UTRs) deduced from the data pointed to the occurrence of leaderless transcripts and transcripts with unusually long 5'-UTRs, in addition to identifying seven putative riboswitch elements for Xcc-B100. Concerning the biosynthesis of xanthan, we focused on the transcriptional organization of the gum gene cluster. Under the conditions tested, we present evidence for a complex transcription pattern of the gum genes with multiple TSSs and an obvious considerable role of antisense transcription. The gene gumB, encoding an outer membrane xanthan exporter, is presented here as an example for genes that possessed a strong antisense TSS. PMID:26975844

  5. Involvement of bacterial TonB-dependent signaling in the generation of an oligogalacturonide damage-associated molecular pattern from plant cell walls exposed to Xanthomonas campestris pv. campestris pectate lyases

    Directory of Open Access Journals (Sweden)

    Vorhölter Frank-Jörg

    2012-10-01

    Full Text Available Abstract Background Efficient perception of attacking pathogens is essential for plants. Plant defense is evoked by molecules termed elicitors. Endogenous elicitors or damage-associated molecular patterns (DAMPs originate from plant materials upon injury or pathogen activity. While there are comparably well-characterized examples for DAMPs, often oligogalacturonides (OGAs, generated by the activity of fungal pathogens, endogenous elicitors evoked by bacterial pathogens have been rarely described. In particular, the signal perception and transduction processes involved in DAMP generation are poorly characterized. Results A mutant strain of the phytopathogenic bacterium Xanthomonas campestris pv. campestris deficient in exbD2, which encodes a component of its unusual elaborate TonB system, had impaired pectate lyase activity and caused no visible symptoms for defense on the non-host plant pepper (Capsicum annuum. A co-incubation of X. campestris pv. campestris with isolated cell wall material from C. annuum led to the release of compounds which induced an oxidative burst in cell suspension cultures of the non-host plant. Lipopolysaccharides and proteins were ruled out as elicitors by polymyxin B and heat treatment, respectively. After hydrolysis with trifluoroacetic acid and subsequent HPAE chromatography, the elicitor preparation contained galacturonic acid, the monosaccharide constituent of pectate. OGAs were isolated from this crude elicitor preparation by HPAEC and tested for their biological activity. While small OGAs were unable to induce an oxidative burst, the elicitor activity in cell suspension cultures of the non-host plants tobacco and pepper increased with the degree of polymerization (DP. Maximal elicitor activity was observed for DPs exceeding 8. In contrast to the X. campestris pv. campestris wild type B100, the exbD2 mutant was unable to generate elicitor activity from plant cell wall material or from pectin. Conclusions To our

  6. Detecção, transmissão e efeito de Xanthomonas campestris pv. campestris na qualidade fisiológica de sementes de brócolis Detection, transmission and effect of Xanthomonas campestris pv. campestris in the physiological quality of broccoli seeds

    Directory of Open Access Journals (Sweden)

    Nilvanira Donizeti Tebaldi

    2007-12-01

    Full Text Available A detecção, a transmissão e o efeito de Xanthomonas campestris pv. campestris (Xcc na qualidade fisiológica de sementes de brócolis (Brassica oleracea var. italica foram avaliados, a partir de sementes obtidas de plantas ("Baron, Flórida, Hana Midori Sakata, Precoce Piracicaba de Verão, Ramoso Santana e Sabre" inoculadas com a bactéria, em condições de campo. Para a detecção do patógeno nas sementes foram utilizados os meios de cultura semi-seletivos: SX ágar, NSCAA e BSCAA; a taxa de transmissão da bactéria pelas sementes às plântulas foi avaliada usando semeadura em areia e meio de cultura contido em tubo de ensaio. Para a avaliação da qualidade fisiológica de sementes foram realizados o teste padrão de germinação e os testes de vigor: envelhecimento acelerado, índice de velocidade de emergência, crescimento de plântulas e massa seca. De acordo com os resultados, o meio de cultura semi-seletivo NSCAA foi mais eficaz para detectar Xcc em sementes de brócolis; não houve diferença significativa entre os genótipos na taxa de transmissão da bactéria pelas sementes e Xcc não afetou a germinação e o vigor das sementes.The detection, transmission and the effect of Xanthomomas campestris pv. campestris (Xcc in the physiological quality of broccoli seeds were evaluated. The seeds were obtained from inoculated field plants (`Baron', `Flórida', `Hana Midori Sakata', `Precoce Piracicaba de Verão', `Ramoso Santana' and `Sabre' genotypes with the bacterium. For the seed pathogen detection the semi-selective medium were used: starch for xanthomonads (SX agar, nutrient starch cycloheximide antibiotic agar (NSCAA and basal starch cycloheximide antibiotic agar (BSCAA; the bacteria seeds transmission percentage was evaluated using sand and test tube. The physiological seed quality was evaluated by the standard germination and vigor tests: the accelerated aging, speed of emergence, seedling growth and seedling dry weight. The

  7. Detecção, transmissão e efeito de Xanthomonas campestris pv. campestris na qualidade fisiológica de sementes de brócolis Detection, transmission and effect of Xanthomonas campestris pv. campestris in the physiological quality of broccoli seeds

    Directory of Open Access Journals (Sweden)

    Nilvanira Donizete Tebaldi

    2007-09-01

    Full Text Available A detecção, a transmissão e o efeito de Xanthomonas campestris pv. campestris (Xcc na qualidade fisiológica de sementes de brócolis (Brassica oleracea var. italica foram avaliadas, a partir de sementes obtidas de plantas ("Baron, Flórida, Hana Midori Sakata, Precoce Piracicaba de Verão, Ramoso Santana e Sabre" inoculadas com a bactéria, em condições de campo. Para a detecção do patógeno nas sementes foram utilizados os meios de cultura semi-seletivos: SX ágar, NSCAA e BSCAA; a taxa de transmissão da bactéria pelas sementes às plântulas foi avaliada usando semeadura em areia e meio de cultura contido em tubo de ensaio. Para a avaliação da qualidade fisiológica das sementes foram realizados o teste padrão de germinação e os testes de vigor: envelhecimento acelerado, índice de velocidade de emergência, crescimento das plântulas e massa seca. De acordo com os resultados, o meio de cultura semi-seletivo NSCAA foi mais eficaz para detectar Xcc em sementes de brócolis; não houve diferença significativa entre os genótipos na taxa de transmissão da bactéria pelas sementes e Xcc não afetou a germinação e o vigor das sementes.The detection, transmission and the effect of Xanthomomas campestris pv. campestris (Xcc in the physiological quality of broccoli seeds were evaluated. The seeds were obtained from inoculated field plants ('Baron', 'Flórida', 'Hana Midori Sakata', 'Precoce Piracicaba de Verão', 'Ramoso Santana' and 'Sabre' genotypes with the bacterium. For the seed pathogen detection the semi-selective medium were used: starch for xanthomonads (SX agar, nutrient starch cycloheximide antibiotic agar (NSCAA and basal starch cycloheximide antibiotic agar (BSCAA; the bacteria seeds transmission percentage was evaluated using sand and test tube. The physiological seed quality was evaluated by the standard germination and vigor tests: the accelerated aging, speed of emergence, seedling growth and seedling dry weight

  8. Etude de l’implantation épiphylle de Xanthomonas campestris pv. corylina, X. campestris pv. juglandis, Erwinia herbicola et Pseudomonas paucimobilis sur feuilles de noisetier

    OpenAIRE

    PRUVOST, Olivier; Gardan, Louis

    1988-01-01

    Sur noisetier, l’étude expérimentale de la vie épiphylle d’une bactérie pathogène homologue X. c. pv. corylina, d’une bactérie pathogène hétérologue X. c. pv. juglandis et de deux bactéries saprophytes E. herbicola et P. paucimobilis a montré que seul X. c. pv. corylina se multipliait intensément et se maintenait à haut niveau (106-107 c.f.u./feuille) alors que pour les autres on ne dénombre que 103-105 c.f.u./feuille. Les observations en microscopie électronique à balayage montrent que...

  9. Reação de clones de videira a Xanthomonas campestris pv. viticola, baseada nos componentes epidemiológicos do cancro bacteriano Reaction of grapevine clones to Xanthomonas campestris pv. viticola, based on epidemiological components of bacterial canker

    OpenAIRE

    Ana Rosa Peixoto Nascimento; Sami Jorge Michereff; Rosa de Lima Ramos Mariano; Ivanise Oliveira Viana

    2006-01-01

    O cancro bacteriano, causado por Xanthomonas campestris pv. viticola (Xcv), é a doença bacteriana mais importante da videira na região do Submédio São Francisco. A reação de 20 clones de videira, sendo 13 de copa e sete de porta-enxerto, foi avaliada quanto à resistência ao patógeno, em casa de vegetação. As plantas foram inoculadas com a suspensão do isolado Xcv1 (A570=108UFC mL-1), incubadas em casa de vegetação e observadas diariamente quanto aos componentes epidemiológicos do cancro bacte...

  10. Cloning of a two-component signal transduction system of Xanthomonas campestris pv. phaseoli var. fuscans strain BXPF65

    DEFF Research Database (Denmark)

    Chan, JWYF; Maynard, Scott; Goodwin, PH

    1998-01-01

    A putative two-component signal transduction system was amplified and cloned from the plant pathogenic bacterium Xanthomonas campestris pv. phaseoli var. fuscans isolate BXPF65. The 620 bp amplified fragment was sequenced and analyzed with the BLAST Enhanced Alignment Utility (BEAUTY). BEAUTY...... analysis indicates that the putative xanthomonad response regulator contains regions which matched to an ATP phosphorylation site, a s54-factor interaction domain, and the “receiver” domains of various transcriptional regulators of the two-component signal transduction systems. Similar analysis indicates...... that the putative histidine kinase has homology with conserved “transmitter” domains of sensor proteins in two-component signal transduction systems. RFLP analysis using the putative signal transduction system showed polymorphisms among the strains....

  11. XerR, a negative regulator of XccR in Xanthomonas campestris pv.Campestris, relieves its repressor function in planta

    Institute of Scientific and Technical Information of China (English)

    Li Wang; Lili Zhang; Yunfeng Geng; Wei Xi; Rongxiang Fang; Yantao Jia

    2011-01-01

    We previously reported that XccR, a LuxR-type regulator of Xanthomonas campestris pv. eampestris (Xcc),activates the downstream proliue iminopeptidase virulence gene (pip) in response to certain host plant factor(s). In this report, we further show that the expression of the xccR gene was repressed in the culture medium by an NtrCtype response regulator, which we named XerR (XccR expression-related, repressor), and that this repression was relieved when the bacteria were grown in planta. Such a regulatory mechanism is reinforced by the observations that XerR directly bound to the xccR promoter in vitro, and that mutations at the phosphorylation-related residues of XerR resulted in the loss of its repressor function. Furthermore, the expression level ofxccR increased even in XerRoverexpressing Xcc cells when they were vacuum infiltrated into cabbage plants. We also preliminarily characterized the host factor(s) involved in the above mentioned interactions between Xcc and the host plant, showing that a plant material(s) with molecular weight(s) less than 1 kDa abolished the binding of XerR to the xccR promoter, while the same material enhanced the binding of XccR to the luxXc box in the pip promoter. Taken together, our results implicate XerR in a new layer of the regulatory mechanism controlling the expression of the virulence-related xccR/pip locus and provide clues to the identification of plant signal molecules that interact with XerR and XccR to enhance the virulence of Xcc.

  12. Caracterização de isolados de Xanthomonas campestris pv campestris de sistemas de produção orgânico e reação de brássicas à podridão-negra Characterization of strains of Xanthomonas campestris pv campestris from organic farming systems and reaction of brassicas to black rot

    Directory of Open Access Journals (Sweden)

    Liliana Andréa dos Santos

    2008-12-01

    Full Text Available Noventa isolados de Xanthomonas campestris pv. campestris (Xcc de brássicas oriundas de sistemas de produção orgânico das Zonas da Mata e Agreste de Pernambuco foram caracterizados com base na sensibilidade a antibióticos e sulfato de cobre e atividade de esterase. A maioria apresentou alta sensibilidade à tetraciclina (76,6%, eritromicina (63,3% e estreptomicina (63,3%, resistência à amoxicilina (70%, gentamicina (40,0% e norfloxacin (45,5% e média sensibilidade (44,4% ou resistência (44,4% à neomicina. Cinqüenta e cinco isolados de Xcc foram resistentes ao sulfato de cobre na concentração de 50 mg/mL e todos foram sensíveis ao produto na concentração de 200 mg/mL. Atividade de esterase foi apresentada por 92,22% dos isolados. A análise Euclidiana por ligação simples evidenciou variabilidade entre os isolados separando-os em sete grupos de similaridade. Foi estudada também a reação de 14 cultivares de brássicas à podridão-negra, utilizando o isolado "B21" de Xcc. As cultivares diferiram significativamente entre si em relação ao período de incubação, incidência e severidade final da doença. Os maiores valores de severidade final da doença foram verificados em brócolos "Ramoso", couve-flor "Bola de Neve" e "Piracicaba de Verão", e repolho "Chato de Quintal". Os híbridos de couve-chinesa "AF 70", "AF 72", "AF 69" e "AF 66" mostraram-se altamente resistentes à doença, enquanto que brócolos "Ramoso" e "Precoce Piracicaba", couve-flor "Piracicaba de Verão" e "Híbrido Cindy" e repolho "60 Dias" foram medianamente resistentes.Ninety strains of Xanthomonas campestris pv. campestris (Xcc from brassicas grown under organic farming systems in the "Mata" and "Agreste" regions of Pernambuco, Brazil, were characterized based upon sensitivity to antibiotics and copper sulfate, and esterase activity. Most of the strains showed high sensitivity to tetracycline (76.6%, erythromycin (63.3% and streptomycin (63

  13. Metabolic flux pattern of glucose utilization by Xanthomonas campestris pv. campestris: prevalent role of the Entner-Doudoroff pathway and minor fluxes through the pentose phosphate pathway and glycolysis.

    Science.gov (United States)

    Schatschneider, Sarah; Huber, Claudia; Neuweger, Heiko; Watt, Tony Francis; Pühler, Alfred; Eisenreich, Wolfgang; Wittmann, Christoph; Niehaus, Karsten; Vorhölter, Frank-Jörg

    2014-10-01

    The well-studied plant pathogenic bacterium Xanthomonas campestris pv. campestris (Xcc) synthesizes the biotechnologically important polysaccharide xanthan gum, which is also regarded as a virulence factor in plant interactions. In Xcc, sugars like glucose are utilized as a source to generate energy and biomass for growth and pathogenicity. In this study, we used [1-(13)C]glucose as a tracer to analyze the fluxes in the central metabolism of the bacterium growing in a minimal medium. (13)C-Metabolic flux analysis based on gas chromatography-mass spectrometry (GC-MS) confirmed the prevalent catabolic role of the Entner-Doudoroff pathway. Comparative nuclear magnetic resonance (NMR)-based isotopologue profiling of a mutant deficient in glycolysis gave evidence for a moderate flux via glycolysis in the wild-type. In addition to reconfirming the Entner-Doudoroff pathway as a catabolic main route, this approach affirmed a numerically minor but important flux via the pentose phosphate pathway.

  14. The Xanthomonas campestris pv. vesicatoria Type-3 Effector XopB Inhibits Plant Defence Responses by Interfering with ROS Production

    Science.gov (United States)

    Priller, Johannes Peter Roman; Reid, Stephen; Konein, Patrick; Dietrich, Petra

    2016-01-01

    The bacterial pathogen Xanthomonas campestris pv. vesicatoria 85–10 (Xcv) translocates about 30 type-3 effector proteins (T3Es) into pepper plants (Capsicum annuum) to suppress plant immune responses. Among them is XopB which interferes with PTI, ETI and sugar-mediated defence responses, but the underlying molecular mechanisms and direct targets are unknown so far. Here, we examined the XopB-mediated suppression of plant defence responses in more detail. Infection of susceptible pepper plants with Xcv lacking xopB resulted in delayed symptom development compared to Xcv wild type infection concomitant with an increased formation of salicylic acid (SA) and expression of pathogenesis-related (PR) genes. Expression of xopB in Arabidopsis thaliana promoted the growth of the virulent Pseudomonas syringae pv. tomato (Pst) DC3000 strain. This was paralleled by a decreased SA-pool and a lower induction of SA-dependent PR gene expression. The expression pattern of early flg22-responsive marker genes indicated that MAPK signalling was not altered in the presence of XopB. However, XopB inhibited the flg22-triggered burst of reactive oxygen species (ROS). Consequently, the transcript accumulation of AtOXI1, a ROS-dependent marker gene, was reduced in xopB-expressing Arabidopsis plants as well as callose deposition. The lower ROS production correlated with a low level of basal and flg22-triggered expression of apoplastic peroxidases and the NADPH oxidase RBOHD. Conversely, deletion of xopB in Xcv caused a higher production of ROS in leaves of susceptible pepper plants. Together our results demonstrate that XopB modulates ROS responses and might thereby compromise plant defence. PMID:27398933

  15. The Xanthomonas campestris pv. vesicatoria Type-3 Effector XopB Inhibits Plant Defence Responses by Interfering with ROS Production.

    Directory of Open Access Journals (Sweden)

    Johannes Peter Roman Priller

    Full Text Available The bacterial pathogen Xanthomonas campestris pv. vesicatoria 85-10 (Xcv translocates about 30 type-3 effector proteins (T3Es into pepper plants (Capsicum annuum to suppress plant immune responses. Among them is XopB which interferes with PTI, ETI and sugar-mediated defence responses, but the underlying molecular mechanisms and direct targets are unknown so far. Here, we examined the XopB-mediated suppression of plant defence responses in more detail. Infection of susceptible pepper plants with Xcv lacking xopB resulted in delayed symptom development compared to Xcv wild type infection concomitant with an increased formation of salicylic acid (SA and expression of pathogenesis-related (PR genes. Expression of xopB in Arabidopsis thaliana promoted the growth of the virulent Pseudomonas syringae pv. tomato (Pst DC3000 strain. This was paralleled by a decreased SA-pool and a lower induction of SA-dependent PR gene expression. The expression pattern of early flg22-responsive marker genes indicated that MAPK signalling was not altered in the presence of XopB. However, XopB inhibited the flg22-triggered burst of reactive oxygen species (ROS. Consequently, the transcript accumulation of AtOXI1, a ROS-dependent marker gene, was reduced in xopB-expressing Arabidopsis plants as well as callose deposition. The lower ROS production correlated with a low level of basal and flg22-triggered expression of apoplastic peroxidases and the NADPH oxidase RBOHD. Conversely, deletion of xopB in Xcv caused a higher production of ROS in leaves of susceptible pepper plants. Together our results demonstrate that XopB modulates ROS responses and might thereby compromise plant defence.

  16. Multiplex PCR for specific and robust detection of Xanthomonas campestris pv. musacearum in pure culture and infected plant material

    DEFF Research Database (Denmark)

    Adriko, John; Aritua, V.; Mortensen, Carmen Nieves;

    2012-01-01

    -specific PCR was successfully multiplexed with internal control primers targeting 16S rDNA for application on DNA from bacterial cultures and with primers targeting plant mitochondrial 26S rDNA for application on DNA extracted from plant material. Diagnostic discrimination of healthy and infected plants......The present study developed a pathovar-specific PCR for the detection of Xanthomonas campestris pv. musacearum (Xcm), the cause of banana xanthomonas wilt, by amplification of a 265-bp region of the gene encoding the general secretion pathway protein D (GspD). A distinct DNA fragment...... of the expected size was amplified from genomic DNA from all of 12 Xcm isolates tested and no amplification of DNA was observed from other xanthomonads or plant-associated bacteria, including the two closely related species Xanthomonas vasicola pv. holcicola and Xanthomonas axonopodis pv. vasculorum. The Xcm...

  17. Reação de genótipos de feijoeiro comum a Fusarium oxysporum f. sp. phaseoli, Macrophomina phaseolina e Xanthomonas campestris pv. phaseoli Behavior of dry bean genotypes to Fusarium oxysporum f. sp. phaseoli, Macrophomina phaseolina, and Xanthomonas campestris pv. phaseoli

    Directory of Open Access Journals (Sweden)

    Antonio Carlos Maringoni

    1999-04-01

    Full Text Available Foi avaliado no presente trabalho o comportamento dos genótipos de feijoeiro (Phaseolus vulgaris L. PI 150414, PI 163117, PI 175829 branco, PI 175829 roxo, PI 175858, PI 197687, A 417, A 420, A 429, Xan 160, Xan 161, WISHBR 40 e IAC Carioca inoculados com Fusarium oxysporum f. sp. phaseoli, Macrophomina phaseolina e Xanthomonas campestris pv. phaseoli, sob condições de telado/casa de vegetação. Verificou-se que os genótipos Xan 160, PI 150414, A 417, PI 175829 roxo, Xan 161, A 420, PI 163117 e PI 175829 branco foram resistentes a F. oxysporum f. sp. phaseoli e somente o PI 175829 branco apresentou bom nível de resistência a M. phaseolina. Com relação ao comportamento desses genótipos a X. campestris pv. phaseoli, eles foram altamente suscetíveis ao isolado Feij-4 e apenas o genótipo Xan 161 apresentou nível moderado de resistência foliar ao isolado Feij-41.The behavior of dry bean (Phaseolus vulgaris L. genotypes PI 150414, PI 163117, PI 175829 white, PI 175829 purple, PI 175858, PI 197687, A 417, A 420, A 429, Xan 160, Xan 161, WISHBR 40, and IAC Carioca inoculated with Fusarium oxysporum f. sp. phaseoli, Macrophomina phaseolina, and Xanthomonas campestris pv. phaseoli was evaluated under greenhouse condition. The bean genotypes Xan 160, PI 150414, A 417, PI 175829 purple, Xan 161, A 420, PI 163117, and PI 175829 white were resistant to F. oxysporum f. sp. phaseoli, and only PI 155829 white had a good level of resistance to M. phaseolina. All bean genotypes were susceptible to Feij-4 strain, and only Xan 161 had some level of leaf resistance to Feij-41 strain of X. campestris pv. phaseoli.

  18. Knock out deletion and functional analysis of glucose transportation system in Xanthomonas campestris pv.campestris%黄单胞菌葡萄糖转运系统相关基因的敲除及功能分析

    Institute of Scientific and Technical Information of China (English)

    马辰; 梁如冰; 刘建华

    2014-01-01

    Three glucose transporters and two membrane-bound glucose dehydrogenases were knocked out in the phy-topathogenic bacterium Xanthomonas campestris pv.campestris 8004.The five mutants and Xcc8004 had little differ-ence in their basic metabolisms , such as cell growth curve , extra-cellular polysaccharide production and cellulases activities when cultured in nutrition-rich medium.However, the deletion of sodium/glucose transporter gene (XC_2460) influenced the cell growth when glucose was used as carbon source ,but its extra-cellular glucose yield in car-boxymethyl cellulose degradation test was about 1.67-fold higher than those of other strains .These results demonstra-ted the hypothesis that the extracellular glucose concentration from cellulose could be increased significantly by block of glucose influx transport system without affecting basic cell metabolism is feasible .%分别敲除了植物病原体野油菜黄单胞菌( Xanthomonas campestris pv.campestris 8004)的3个葡萄糖转运蛋白和2个葡萄糖脱氢酶,获得了5株相应基因敲除的突变体。在营养丰富的培养基中,这5株突变体的生长曲线、胞外纤维素酶活性和胞外多糖量与野生型相比并无显著差异。在以葡萄糖为唯一碳源的M63培养基中,XC_2460基因的敲除显著影响了黄单胞菌的生长;在以CMC作为唯一碳源的M63培养基中, XC_2460基因的敲除使突变体的胞外葡萄糖累积量达到野生菌株的1.67倍。这些结果首次显示阻遏葡萄糖的跨膜转运是改进纤维素分解菌株积累葡萄糖量的有益途径。

  19. Efeito do tratamento de bacelos de videira 'Red Globe' no controle do cancro bacteriano causado por Xanthomonas campestris pv. viticola

    Directory of Open Access Journals (Sweden)

    Carine Rosa Naue

    2014-12-01

    Full Text Available A disseminação de Xanthomonas campestris pv. viticola (Xcv, agente do cancro bacteriano da videira, ocorre, dentre outras formas, por meio de mudas e bacelos infectados. Foi estudada a obtenção de material propagativo livre do patógeno, testando a eficiência do tratamento de bacelos com termoterapia, bactericidas e sanitizantes. Os isolados de Xcv foram testados quanto à patogenicidade e realizado o teste de sensibilidade in vitro aos produtos, em diferentes concentrações. A erradicação de Xcv em bacelos de videira foi testada em experimentos com termoterapia (50ºC por 30 e 40 min; 53ºC por 5 e 10 min; bactericidas [oxitetraciclina+sulfato de cobre (150+2.000; 165+2.200; 180+2.400 e 195+2.600 mg L-1 de H2O e oxitetraciclina (600; 700; 800 e 900 mg L-1]; e sanitizantes [cloreto de dodecildimetil amônio (600; 1.200; 1.800; 2.400 e 3.000 µL L-1; hipoclorito de sódio (5.000; 10.000; 20.000; 30.000 e 40.000 µL L-1 e cloreto de benzalcônio (125; 167;250; 334 e 500 µL L-1]. Foram avaliados período de incubação, incidência e severidade da doença. O bactericida oxitetraciclina e os sanitizantes cloreto de dodecildimetil amônio e hipoclorito de sódio proporcionaram os maiores halos de inibição de Xcv in vitro. No entanto, apesar dos diversos tratamentos testados, não foi possível recomendar tratamento termoterápico ou produto que erradicasse Xcv de bacelos infectados. Porém, ficou confirmada a grande importância destes na disseminação do agente do cancro bacteriano da videira.

  20. Regulation of cell wall-bound invertase in pepper leaves by Xanthomonas campestris pv. vesicatoria type three effectors.

    Directory of Open Access Journals (Sweden)

    Sophia Sonnewald

    Full Text Available Xanthomonas campestris pv. vesicatoria (Xcv possess a type 3 secretion system (T3SS to deliver effector proteins into its Solanaceous host plants. These proteins are involved in suppression of plant defense and in reprogramming of plant metabolism to favour bacterial propagation. There is increasing evidence that hexoses contribute to defense responses. They act as substrates for metabolic processes and as metabolic semaphores to regulate gene expression. Especially an increase in the apoplastic hexose-to-sucrose ratio has been suggested to strengthen plant defense. This shift is brought about by the activity of cell wall-bound invertase (cw-Inv. We examined the possibility that Xcv may employ type 3 effector (T3E proteins to suppress cw-Inv activity during infection. Indeed, pepper leaves infected with a T3SS-deficient Xcv strain showed a higher level of cw-Inv mRNA and enzyme activity relative to Xcv wild type infected leaves. Higher cw-Inv activity was paralleled by an increase in hexoses and mRNA abundance for the pathogenesis-related gene PRQ. These results suggest that Xcv suppresses cw-Inv activity in a T3SS-dependent manner, most likely to prevent sugar-mediated defense signals. To identify Xcv T3Es that regulate cw-Inv activity, a screen was performed with eighteen Xcv strains, each deficient in an individual T3E. Seven Xcv T3E deletion strains caused a significant change in cw-Inv activity compared to Xcv wild type. Among them, Xcv lacking the xopB gene (Xcv ΔxopB caused the most prominent increase in cw-Inv activity. Deletion of xopB increased the mRNA abundance of PRQ in Xcv ΔxopB-infected pepper leaves, but not of Pti5 and Acre31, two PAMP-triggered immunity markers. Inducible expression of XopB in transgenic tobacco inhibited Xcv-mediated induction of cw-Inv activity observed in wild type plants and resulted in severe developmental phenotypes. Together, these data suggest that XopB interferes with cw-Inv activity in planta to

  1. Métodos de preservação e crescimento de Xanthomonas campestris pv. viticola em meio de cultura variando temperatura, pH e concentração de NaCl Preservation methods and growth of Xanthomonas campestris pv. viticola in culture medium varying temperature, pH and NaCl concentration

    OpenAIRE

    Ana R. P. Nascimento; Rosa L.R. Mariano; Marco A. S. Gama

    2005-01-01

    A bactéria fitopatogênica Xanthomonas campestris pv. viticola (Xcv) causa o cancro bacteriano da videira (Vitis vinifera), que ocasiona grandes prejuízos à viticultura no Brasil. Os métodos de dessecação em papel de filtro (DPF), repicagens periódicas (RP), água destilada esterilizada (ADE) e folhas herborizadas (FH) foram utilizados para preservar duas estirpes de Xcv durante 12 meses. As variáveis viabilidade e patogenicidade foram avaliadas mensalmente e estimadas pela obtenção de crescime...

  2. Molecular typing of Dutch isolates of Xanthomonas arboricola pathovar pruni isolated from ornamental cherry laurel.Journal of Plant Pathology

    NARCIS (Netherlands)

    Bergsma-Vlami, M.; Martin, W.; Koenraadt, H.; Teunissen, H.; Pothier, J.F.; Duffy, B.; Doorn, van J.

    2012-01-01

    Xanthomonas arboricola pv. pruni (Xap) has been found in several cherry laurel (Prunus laurocerasus) nurseries in the Netherlands, causing leaf spot. As no information is available yet about the epidemiology of this quarantine bacterium in cherry laurel, molecular typing of Xap isolates can consider

  3. Transgenic expression of the rice Xa21 pattern-recognition receptor in banana (Musa sp.) confers resistance to Xanthomonas campestris pv. musacearum.

    Science.gov (United States)

    Tripathi, Jaindra N; Lorenzen, Jim; Bahar, Ofir; Ronald, Pamela; Tripathi, Leena

    2014-08-01

    Banana Xanthomonas wilt (BXW), caused by the bacterium Xanthomonas campestris pv. musacearum (Xcm), is the most devastating disease of banana in east and central Africa. The spread of BXW threatens the livelihood of millions of African farmers who depend on banana for food security and income. There are no commercial chemicals, biocontrol agents or resistant cultivars available to control BXW. Here, we take advantage of the robust resistance conferred by the rice pattern-recognition receptor (PRR), XA21, to the rice pathogen Xanthomonas oryzae pv. oryzae (Xoo). We identified a set of genes required for activation of Xa21-mediated immunity (rax) that were conserved in both Xoo and Xcm. Based on the conservation, we hypothesized that intergeneric transfer of Xa21 would confer resistance to Xcm. We evaluated 25 transgenic lines of the banana cultivar 'Gonja manjaya' (AAB) using a rapid bioassay and 12 transgenic lines in the glasshouse for resistance against Xcm. About 50% of the transgenic lines showed complete resistance to Xcm in both assays. In contrast, all of the nontransgenic control plants showed severe symptoms that progressed to complete wilting. These results indicate that the constitutive expression of the rice Xa21 gene in banana results in enhanced resistance against Xcm. Furthermore, this work demonstrates the feasibility of PRR gene transfer between monocotyledonous species and provides a valuable new tool for controlling the BXW pandemic of banana, a staple food for 100 million people in east Africa.

  4. Seleção de genótipos de pimentão resistentes à Xanthomonas campestris pv. vesicatoria (Doidge) Dye. sob condições naturais de infecção Selection of pepper genotypes resistant to Xanthomonas campestris pv. vesicatoria (Doidge) Dye. under natural condictions of plant infection

    OpenAIRE

    Hiroshi Noda; Francisco Manoares Machado; Ayrton Luiz Urizzi Martins

    2003-01-01

    Devido à ocorrência de epidemias severas de pústula bacteriana ou mancha bacteriana no pimentão, causada pela bactéria Xanthomonas campestris pv. vesicatoria (Doidge) Dye., o cultivo do pimentão na várzea do Rio Solimões, próximo à Manaus, encontra-se em decadência. O INPA, desde 1976, desenvolve um Programa de Melhoramento Genético do Pimentão visando incorporar resistência ao patógeno. Neste trabalho são relatados os resultados obtidos em três ensaios, nas áreas de terra firme e várzea do E...

  5. Efeito de formulações cúpricas e cuprorgânicas na severidade da mancha-bacteriana e na população residente de Xanthomonas campestris pv. vesicatoria em pimentão

    OpenAIRE

    Aguiar Luiz Augusto de; Kimura Osamu; Castilho Alzimiro Marcelo C.; Castilho Kátia Simone C.; Ribeiro Raul de Lucena D.; Akiba Fujio; Carmo Margarida Goréte F. do

    2003-01-01

    Foram conduzidos dois experimentos de campo, em locais isolados entre si, objetivando avaliar o efeito de formulações cúpricas e cuprorgânicas na redução de populações de Xanthomonas campestris pv. vesicatoria presentes no filoplano do pimentão, bem como na redução da severidade dos sintomas da mancha-bacteriana. Numa das áreas experimentais, plantas da cultivar Cascadura Itaipu foram inoculadas com o isolado ENA-818, sensível ao cobre; na outra área, plantas da mesma cultivar foram inoculada...

  6. Bioactivity of Several Bactericides against Xanthomonas campestris pv.citri%几种杀菌剂对柑桔溃疡病的生物活性

    Institute of Scientific and Technical Information of China (English)

    孙惠敏; 李保同; 郭明程; 陈慈相; 谢金招; 刘德力

    2011-01-01

    为筛选防治柑桔溃疡病的有效药剂,按大田推荐使用浓度,用抑菌圈法测定17种非铜药剂和5种含铜药剂对柑桔溃疡病的毒力,并研究7种非铜药剂田间防治效果.结果表明,代森锰锌、福美双、福美双·溴菌腈、农用链霉素、金核霉素和琥胶肥酸铜·乙磷铝·硫酸锌抑菌作用最强,其次为福美双·福美锌、大蒜素、络氨铜·络氨锌和盐酸吗啉胍·乙酸铜,过氧乙酸、噻唑锌、春雷菌素、中生菌素、琥珀酸铜和噻菌铜有微弱的抑菌作用,百菌清、多菌灵、苯醚甲环唑、叶青双、复硝酚钠和井冈霉素无抑菌作用.大田试验结果表明,30%金核霉素WP 500 mg/L和72%农用链霉素WP 200 mg/L处理对柑桔溃病的防效分别为76.34%和74.94%,显著优于其它药剂处理;80%代森锰锌WP 2000 mg/L、50%福美双WP 400 mg/L和50%福美双·溴菌腈WP 500 mg/L处理对柑桔溃病的防效分别为70.36%、66.55%和69.37%,与对照含铜药剂20%噻菌铜SC 67 mg/L处理无显著差异;大蒜素和叶青双对柑桔溃病防效较差,6%大蒜素EC 120 mg/L和20%叶青双WP 400 mg/L处理对柑桔溃病的防效分别为41.84%和21.82%,显著低于对照含铜药剂20%噻菌铜SC 67 mg/L处理.%In order to screen effective bactericides against Xanthomonas camprestris pv. citri, the toxicity of 17 non - copper fungicides and 5 copper fungicides against the strain of X. campestris pv. citri in the greenhouse were determined by the method of inhibition zone, and the efficacy of 7 non - copper fungicides in the field was tested. The results showed that manzoceb, thiram, thiram -bromothalonil, agricultural streptomycin, aureonucleomycin and DT -fosetyl -aluminium -zinc suffate had the strongest inhibitory effect on the pathogen, thiram- ziram, allicin, cupric tetramminosuffate- zinc tetramminosuffate and moroxydine hydrochloride- cupric acetate had relatively strong inhibitory effect, peracetic acid, Zn thiazole, Kasugamycin, Zhong

  7. 野油菜黄单胞菌反枝苋致病菌毒素的分离和结构分析%Isolation and Characterization of a Phytotoxin from Xanthomonas campestris pv. retroflexus

    Institute of Scientific and Technical Information of China (English)

    李明智; 徐凌; 孙自伶; 李永泉

    2007-01-01

    A phytotoxin from Xanthomonas campestris pv. retroflexus was isolated using a chromatographer and HPLC, and the components were identified to be a mixture of minor molecular compounds including organic acids and cyclo-(proline-phenylalanine). The greenhouse cultivation test was used to determine the influence of the isolated fractions on the growth of target weed redroot pigweed (Amaranthus retroflexus L). The experimental results demonstrated that the cyclo-(Pro-Phe) had the weed inhibit activity obviously on dicotyledonous weed and the mixture with six organic acids showed stronger bioactivity. Further, greenhouse and field test were processed, and the test showed that the use of the toxin appeared to have the potential to be developed further as a bioherbicide system to control weedy grasses.

  8. Identification and Cloning of a Novel Gene Involved in EPS Biosynthesis of Xanthomonas campestris pv. campestris%野油菜黄单胞菌野油菜致病变种中一个与EPS合成有关的新基因的鉴定

    Institute of Scientific and Technical Information of China (English)

    陆光涛; 唐纪良; 何勇强; 陈保善; 唐东阶

    2003-01-01

    利用转座子Tn5gusA5对野油菜黄单胞菌野油菜致病变种(Xanthomonas campestris pv. campestris,简称Xcc)野生型菌株8004进行诱变,分离到一批胞外多糖(EPS)合成减少的突变体.采用TAIL-PCR(thermal asymmetric interlaced PCR)分析突变体的Tn5gusA5插入位点,发现其中一株编号为151D09的突变体的插入位点位于Xcc 8004菌株的基因组编号为XC3695的ORF内,该ORF功能尚未见报道.序列分析表明,该ORF演绎的编码产物与Serratia marcescens的kdtX基因和Klebsiella pneumoniae的waaE基因演绎的编码产物分别具有52%和50%的相似性,并具有第2家族糖基转移酶的功能域, 因此暂将该ORF命名为waxE基因.用同源双交换方法构建了waxE基因的缺失突变体,并采用PCR和Southern杂交的方法对突变体进行了验证.waxE基因缺失突变体在营养丰富培养基的生长繁殖不受影响,但其EPS产量与野生型菌株8004相比,降低35%左右,并且一段PCR合成的包含waxE基因的DNA片段能反式互补waxE基因缺失突变体,恢复缺失突变体的EPS产量,表明Xcc waxE基因与EPS的生物合成有关.

  9. Molecular test to assign individuals within the Cacopsylla pruni complex.

    Directory of Open Access Journals (Sweden)

    Jean Peccoud

    Full Text Available Crop protection requires the accurate identification of disease vectors, a task that can be made difficult when these vectors encompass cryptic species. Here we developed a rapid molecular diagnostic test to identify individuals of Cacopsyllapruni (Scopoli, 1763 (Hemiptera: Psyllidae, the main vector of the European stone fruit yellows phytoplasma. This psyllid encompasses two highly divergent genetic groups that are morphologically similar and that are characterized by genotyping several microsatellite markers, a costly and time-consuming protocol. With the aim of developing species-specific PCR primers, we sequenced the Internal Transcribed Spacer 2 (ITS2 on a collection of C. pruni samples from France and other European countries. ITS2 sequences showed that the two genetic groups represent two highly divergent clades. This enabled us to develop specific primers for the assignment of individuals to either genetic group in a single PCR, based on ITS2 amplicon size. All previously assigned individuals yielded bands of expected sizes, and the PCR proved efficient on a larger sample of 799 individuals. Because none appeared heterozygous at the ITS2 locus (i.e., none produced two bands, we inferred that the genetic groups of C. pruni, whose distribution is partly sympatric, constitute biological species that have not exchanged genes for an extended period of time. Other psyllid species (Cacopsylla, Psylla, Triozidae and Aphalaridae failed to yield any amplicon. These primers are therefore unlikely to produce false positives and allow rapid assignment of C. pruni individuals to either cryptic species.

  10. Characterization of the GntR family regulator HpaR1 of the crucifer black rot pathogen Xanthomonas campestris pathovar campestris

    OpenAIRE

    Hui-Zhao Su; Liu Wu; Yan-Hua Qi; Guo-Fang Liu; Guang-Tao Lu; Ji-Liang Tang

    2016-01-01

    The GntR family transcription regulator HpaR1 identified from Xanthomonas campestris pv. campestris has been previously shown to positively regulate the genes responsible for hypersensitive reaction and pathogenicity and to autorepress its own expression. Here, we demonstrated that HpaR1 is a global regulator that positively regulates diverse biological processes, including xanthan polysaccharide production, extracellular enzyme activity, cell motility and tolerance to various stresses. To in...

  11. Construction of lactose-utilizing Xanthomonas campestris and production of xanthan gum from whey.

    OpenAIRE

    Fu, J F; Tseng, Y. H.

    1990-01-01

    Xanthomonas campestris pv. campestris possesses a low level of beta-galactosidase and therefore is not able to grow and produce significant amounts of xanthan gum in a medium containing lactose as the sole carbon source. In this study, a beta-galactosidase expression plasmid was constructed by ligating an X. campestris phage phi LO promoter with pKM005, a ColE1 replicon containing Escherichia coli lacZY genes and the lpp ribosome-binding site. It was then inserted into an IncP1 broad-host-ran...

  12. Flavonoids from Lonchocarpus campestris (Leguminosae); Flavonoides de Lonchocarpus campestris (Leguminosae)

    Energy Technology Data Exchange (ETDEWEB)

    Pires, Andreza Maria L.; Silveira, Edilberto R.; Pessoa, Otilia Deusdenia L., E-mail: opessoa@ufc.b [Universidade Federal do Ceara (DQOI/UFC), Fortaleza, CE (Brazil). Dept. de Quimica Organica e Inorganica

    2011-07-01

    A new flavone named 3,4',5,6-tetramethoxy-[2'', 3'':7,8] furanoflavone besides the known flavonoids (2S,3R,4S)-3,4,5,8-tetramethoxy-[2'',3'':6,7]-furanoflavan, 3,6-dimethoxy-2'',2''-dimethylcromene-[2'',3'':7,8]-flavone, 3,5,6-trimethoxy-[2'',3'':7,8]-furanoflavone, 2,4',4,5-tetramethoxy-[2'',3'':6,7]-furanodihydroaurone, (2R,3S,4S)-3,4,5,6-tetramethoxy-[2'',3'':7,8]-furanoflavan and 3',4'-methylenedioxy-5,6-dimethoxy-[2'',3'':7,8]-furanoflavone were isolated from the root barks of Lonchocarpus campestris. The complete {sup 1}H and {sup 13}C NMR assignments of the new furan flavonoid was performed using 1D and 2D pulse sequences, including COSY, HMQC and HMBC experiments. (author)

  13. Genetics of xanthan production in Xanthomonas campestris: the xanA and xanB genes are involved in UDP-glucose and GDP-mannose biosynthesis.

    OpenAIRE

    Köplin, R; Arnold, W.; Hötte, B; Simon, R; Wang, G; Pühler, A

    1992-01-01

    The nucleotide sequence of a 3.4-kb EcoRI-PstI DNA fragment of Xanthomonas campestris pv. campestris revealed two open reading frames, which were designated xanA and xanB. The genes xanA and xanB encode proteins of 448 amino acids (molecular weight of 48,919) and 466 amino acids (molecular weight of 50,873), respectively. These genes were identified by analyzing insertion mutants which were known to be involved in xanthan production. Specific tests for the activities of enzymes involved in th...

  14. The acylation and phosphorylation pattern of lipid A from Xanthomonas Campestris strongly influence its ability to trigger the innate immune response in arabidopsis

    DEFF Research Database (Denmark)

    Silipo, Alba; Sturiale, Luisa; Garozzo, Domenico;

    2008-01-01

    these macromolecules to the external membrane. LPSs are one of a group of molecules called pathogen-associated molecular patterns (PAMPs) that are indispensable for bacterial growth and viability, and act to trigger innate defense responses in eukaryotes. We have previously shown that LPS from the plant pathogen...... Xanthomonas campestris pv. campestris (Xcc) can elicit defense responses in the model plant Arabidopsis thaliana. Here we have extended these studies by analysis of the structure and biological activity of LPS from a nonpathogenic Xcc mutant, strain 8530. We show that this Xcc strain is defective in core...

  15. Characterization of the GntR family regulator HpaR1 of the crucifer black rot pathogen Xanthomonas campestris pathovar campestris.

    Science.gov (United States)

    Su, Hui-Zhao; Wu, Liu; Qi, Yan-Hua; Liu, Guo-Fang; Lu, Guang-Tao; Tang, Ji-Liang

    2016-01-01

    The GntR family transcription regulator HpaR1 identified from Xanthomonas campestris pv. campestris has been previously shown to positively regulate the genes responsible for hypersensitive reaction and pathogenicity and to autorepress its own expression. Here, we demonstrated that HpaR1 is a global regulator that positively regulates diverse biological processes, including xanthan polysaccharide production, extracellular enzyme activity, cell motility and tolerance to various stresses. To investigate the regulatory mechanisms of HpaR1, we began with xanthan polysaccharide production, which is governed by a cluster of gum genes. These are directed by the gumB promoter. Disruption of HpaR1 significantly reduced gumB transcription and an electrophoretic mobility shift assay demonstrated that HpaR1 interacts directly with gumB promoter. DNase I footprint analysis revealed that HpaR1 and RNA polymerase were bound to the sequences extending from -21 to +10 and -41 to +29 relative to the transcription initiation site of gumB, respectively. Furthermore, in vitro transcription assays showed that HpaR1 facilitated the binding of RNA polymerase to gumB promoter, leading to an enhancement of its transcription. These results suggest that HpaR1 regulates gumB transcription via a mechanism similar but different to what was found, until now, to only be used by some MerR family transcription activators. PMID:26818230

  16. Candida pruni sp. nov. is a new yeast species with antagonistic potential against brown rot of peaches.

    Science.gov (United States)

    Zhang, Dian-peng; Lu, Cai-ge; Zhang, Tao-tao; Spadaro, Davide; Liu, De-wen; Liu, Wei-cheng

    2014-07-01

    Brown rot caused by Monilinia spp. is among the most important postharvest diseases of commercially grown stone fruits, and application of antagonistic yeasts to control brown rot is one promising strategy alternative to chemical fungicides. In this research, new yeast strains were isolated and tested for their activity against peach brown rot caused by Monilinia fructicola. Three yeast strains were originally isolated from the surface of plums (cv Chinese Angelino) collected in the north of China. In artificially wounded inoculation tests, the yeast reduced the brown rot incidence to 20 %. The population of the yeast within inoculated wounds on peaches significantly increased at 25 °C from an initial level of 5.0×10(6) to 4.45×10(7) CFU per wound after 1 day. The antagonistic strains were belonging to a new species of the genus Candida by sequence comparisons of 26 S rDNA D1/D2 domain and internal transcribed spacer region. The strains are most closely related to C. asparagi, C. musae and C. fructus on the basis of the phylogenetic trees based on the D1/D2 region of 26S rDNA. However, the strains are notably different from C. asparagi, C. musae and C. fructus, in morphological and physiological characteristics. Therefore, the name Candida pruni is proposed for the novel species, with sp-Quan (=CBS12814T=KCTC 27526T=GCMC 6582T) as the type strain. Our study showed that Candida pruni is a novel yeast species with potential biocontrol against brown rot caused by M. fructicola on peaches. PMID:24908073

  17. Phenotypic and genotypic characterization of Xanthomonas campestris strains isolated from cabbage, kale and broccoli

    Directory of Open Access Journals (Sweden)

    Popović Tatjana

    2013-01-01

    Full Text Available Thirty-six strains of Xanthomonas campestris pv. campestris (Xcc isolated from cabbage, kale and broccoli were identified according to their pathogenicity, phenotypic and genotypic characterization. Pathogenicity was confirmed by the injection method with a hypodermic syringe into the mesophilic tissue of cabbage leaves. All strains were Gramnegative, aerobic, catalase-positive, oxidase-negative, grew at 35°C, produced levan, H2S and indole, did not reduce nitrate, hydrolyzed Tween 80, starch, gelatin and esculin and did not show tolerance to 0.1 and 0.02% TTC. The strains produced acid from d-arabinose, arginine, dulcitol, galactose, d-glucose, maltose, mannose, sorbitol, sucrose and xylose. The genetic characterization was based on the sequence analyses of 16S rDNA and ERIC and BOX PCR. Strains of different pathovars were also used to compare PCR resulting patterns. BOX-PCR of the strains from kale and broccoli, obtained using (GTG5 primer, yielded patterns with a high similarity level to pathovar reference strain Xcc. The strains from cabbage yielded BOX and ERIC product patterns, distinguishing them from the other tested strains and reference strains. 16S rDNA of the representative strains was closely related to Xcc strain ATCC 33913. ERIC PCR and BOX using (GTG5 primer generated different Xcc patterns and were effective in distinguishing strains from different plant hosts. [Projekat Ministarstva nauke Republike Srbije, br. III43010 i br. III46007

  18. Comparative genomic analysis of Xanthomonas axonopodis pv. citrumelo F1, which causes citrus bacterial spot disease, and related strains provides insights into virulence and host specificity.

    Science.gov (United States)

    Jalan, Neha; Aritua, Valente; Kumar, Dibyendu; Yu, Fahong; Jones, Jeffrey B; Graham, James H; Setubal, João C; Wang, Nian

    2011-11-01

    Xanthomonas axonopodis pv. citrumelo is a citrus pathogen causing citrus bacterial spot disease that is geographically restricted within the state of Florida. Illumina, 454 sequencing, and optical mapping were used to obtain a complete genome sequence of X. axonopodis pv. citrumelo strain F1, 4.9 Mb in size. The strain lacks plasmids, in contrast to other citrus Xanthomonas pathogens. Phylogenetic analysis revealed that this pathogen is very close to the tomato bacterial spot pathogen X. campestris pv. vesicatoria 85-10, with a completely different host range. We also compared X. axonopodis pv. citrumelo to the genome of citrus canker pathogen X. axonopodis pv. citri 306. Comparative genomic analysis showed differences in several gene clusters, like those for type III effectors, the type IV secretion system, lipopolysaccharide synthesis, and others. In addition to pthA, effectors such as xopE3, xopAI, and hrpW were absent from X. axonopodis pv. citrumelo while present in X. axonopodis pv. citri. These effectors might be responsible for survival and the low virulence of this pathogen on citrus compared to that of X. axonopodis pv. citri. We also identified unique effectors in X. axonopodis pv. citrumelo that may be related to the different host range as compared to that of X. axonopodis pv. citri. X. axonopodis pv. citrumelo also lacks various genes, such as syrE1, syrE2, and RTX toxin family genes, which were present in X. axonopodis pv. citri. These may be associated with the distinct virulences of X. axonopodis pv. citrumelo and X. axonopodis pv. citri. Comparison of the complete genome sequence of X. axonopodis pv. citrumelo to those of X. axonopodis pv. citri and X. campestris pv. vesicatoria provides valuable insights into the mechanism of bacterial virulence and host specificity.

  19. [Flavonoids of Artemisia campestris, ssp. glutinosa].

    Science.gov (United States)

    Hurabielle, M; Eberle, J; Paris, M

    1982-10-01

    Four flavanones (pinostrobin, pinocembrin, sakuranetin and naringenin), one dihydroflavonol (7-methyl aromadendrin) and one flavone (hispidulin) have been isolated from Artemisia campestris L. ssp. glutinosa Gay and identified by spectroscopic methods. Artemisia campestris L. sous-espèce glutinosa Gay est une Composée Anthémidée largement répandue sur les sables du littoral méditerranéean et abondante dans certaines régions d'Espagne et d'Italie. Dans le cadre d'une étude chimiotaxonomique du genre Artemisia Tourn., nous nous sommes intéressés à l'analyse des flavonoïdes, composés jamais décrits, à notre connaissance, dans cette espèce d' Artemisia. Les sommités fleuries d' Artemisia campestris sous-espèce glutinosa, séchées et pulvérisées, sont dégraissées à l'ether de pétrole et épuisées par le chloroforme. Le fractionnement de l'extrait chloroformique, par chromatographie sur colonne de silice, et la purification de certaines fractions conduisent à l'isolement de six génines flavoniques, à l'etat pur. L' étude des spectres UV, des spectres de masse et des spectres de RMN [1,2] et la comparaison avec des échantillons authentiques permettent de proposer, pour ces flavonoïdes, les structures de la pinostrobine [3], de la pinocembrine [4], de la sakuranétine, de la naringénine [5] (flavanones), de la méthyl-7-aromadendrine, [6, 7] (dihydroflavonol) et de l'hispiduline [8, 9] (flavone); quatre de ces génines sont méthylées. Parmi ces flavonoïdes, la pinostrobine n'a jamais été décrite, à notre connaissance, dans la famille des Composées; la pinocembrine, la sakuranétine et la naringénine ont déjà été signalées chez quelques Astéracées et Eupatoriées [10], et l'hispiduline dans la tribu des Anthémidées ( Santolina chamaecyparissus L.) [8]. Seule, la méthyl-7-aromadendrine semble décrite, à ce jour, dans le genre Artemisia Tourn. [7].

  20. [Flavonoids of Artemisia campestris, ssp. glutinosa].

    Science.gov (United States)

    Hurabielle, M; Eberle, J; Paris, M

    1982-10-01

    Four flavanones (pinostrobin, pinocembrin, sakuranetin and naringenin), one dihydroflavonol (7-methyl aromadendrin) and one flavone (hispidulin) have been isolated from Artemisia campestris L. ssp. glutinosa Gay and identified by spectroscopic methods. Artemisia campestris L. sous-espèce glutinosa Gay est une Composée Anthémidée largement répandue sur les sables du littoral méditerranéean et abondante dans certaines régions d'Espagne et d'Italie. Dans le cadre d'une étude chimiotaxonomique du genre Artemisia Tourn., nous nous sommes intéressés à l'analyse des flavonoïdes, composés jamais décrits, à notre connaissance, dans cette espèce d' Artemisia. Les sommités fleuries d' Artemisia campestris sous-espèce glutinosa, séchées et pulvérisées, sont dégraissées à l'ether de pétrole et épuisées par le chloroforme. Le fractionnement de l'extrait chloroformique, par chromatographie sur colonne de silice, et la purification de certaines fractions conduisent à l'isolement de six génines flavoniques, à l'etat pur. L' étude des spectres UV, des spectres de masse et des spectres de RMN [1,2] et la comparaison avec des échantillons authentiques permettent de proposer, pour ces flavonoïdes, les structures de la pinostrobine [3], de la pinocembrine [4], de la sakuranétine, de la naringénine [5] (flavanones), de la méthyl-7-aromadendrine, [6, 7] (dihydroflavonol) et de l'hispiduline [8, 9] (flavone); quatre de ces génines sont méthylées. Parmi ces flavonoïdes, la pinostrobine n'a jamais été décrite, à notre connaissance, dans la famille des Composées; la pinocembrine, la sakuranétine et la naringénine ont déjà été signalées chez quelques Astéracées et Eupatoriées [10], et l'hispiduline dans la tribu des Anthémidées ( Santolina chamaecyparissus L.) [8]. Seule, la méthyl-7-aromadendrine semble décrite, à ce jour, dans le genre Artemisia Tourn. [7]. PMID:17396957

  1. Lentinan promotes the root of Brassica CampestrisL.

    Directory of Open Access Journals (Sweden)

    Guoyun Zhang

    2015-06-01

    Full Text Available The aim of this work was to study the effect of lentinan on Brassica campestris L (rape. Spraying on the leaves of lentinan B. campestris L. at 0.05×10-6 g ml-1 concentration significantly promoted the root elongation (P<0.05. The results for the first time showed that lentinan could prolongate roots as a new plant hormone.

  2. Induced polyploidization in Brassica campestris L. (Brassicaceae).

    Science.gov (United States)

    Kumar, G; Dwivedi, K

    2014-01-01

    Present experimental design has been made up to obtain crop with higher ploidy level via synthetic polyploidization. Since ploidy manipulation is generally associated with the obtainment of some increased enviable traits of the crop and also provides them greater adaptability to unfavorable or harsh circumstances as compared to its diploids counterparts. Thus, herein present research autotetraploids of Brassica campestris L. have been lucratively achieved by the application of colchicine. Two methods of treatment were utilized i.e. seed treatment and seedling treatment. No polyploidy could be obtained through seed treatment while seedling treatment responded well towards polyploidy. However, the status of autotetraploidy has been confirmed by cytomorphological investigations of treated plants as against its diploids counterparts. For the purpose, morphological parameters such as increased stomata size, pollen diameter, flower size, reproductive organs whereas reduction in plant height, leaf length, leaf breadth, stomata frequency, number of flowers/inflorescence etc. were appraised. Further, cytological observations were made that had clearly revealed the doubling of genome in the autotetraploids as compared to diploids. Meanwhile, pollen fertility and size of pollen grains were evaluated as well. PMID:24818510

  3. Applying DNA affinity chromatography to specifically screen for sucrose-related DNA-binding transcriptional regulators of Xanthomonas campestris.

    Science.gov (United States)

    Leßmeier, Lennart; Alkhateeb, Rabeaa S; Schulte, Fabian; Steffens, Tim; Loka, Tobias Pascal; Pühler, Alfred; Niehaus, Karsten; Vorhölter, Frank-Jörg

    2016-08-20

    At a molecular level, the regulation of many important cellular processes is still obscure in xanthomonads, a bacterial group of outstanding relevance as world-wide plant pathogens and important for biotechnology as producers of the polysaccharide xanthan. Transcriptome analysis indicated a sucrose-dependent regulation of 18 genes in Xanthomonas campestris pv. campestris (Xcc) B100. The expression of 12 of these genes was clearly increased in the presence of sucrose. Only part of these genes was obviously involved in sucrose utilization. To identify regulatory proteins involved in transcriptional regulation, a DNA fragment-specific pull-down approach was established for Xcc. Putative promoter regions were identified and used to isolate DNA-binding proteins, which were separated by SDS PAGE and identified by MALDI-TOF mass spectrometry. This led to the identification of four transcriptional regulators, among them the global transcriptional regulator Clp and a previously identified regulator of sucrose utilization, SuxR, plus a third DNA-binding transcriptional regulator encoded by xcc-b100_2861 and recently shown to interact with a cyclic di-GMP-binding protein. The fourth regulatory protein was encoded by xcc-b100_2791. These results indicate DNA fragment-specific pull-down experiments as promising approaches to screen for specific DNA-binding regulatory proteins in Xcc. PMID:27060555

  4. The molybdate-binding protein (ModA) of the plant pathogen Xanthomonas axonopodis pv. citri.

    Science.gov (United States)

    Balan, Andrea; Santacruz, Carolina P; Moutran, Alexandre; Ferreira, Rita C C; Medrano, Francisco J; Pérez, Carlos A; Ramos, Carlos H I; Ferreira, Luís C S

    2006-12-01

    The modABC operon of phytopathogen Xanthomonas axonopodis pv. citri (X. citri) encodes a putative ABC transporter involved in the uptake of the molybdate and tungstate anions. Sequence analyses showed high similarity values of ModA orthologs found in X. campestris pv. campestris (X. campestris) and Escherichia coli. The X. citri modA gene was cloned in pET28a and the recombinant protein, expressed in the E. coli BL21 (DE3) strain, purified by immobilized metal affinity chromatography. The purified protein remained soluble and specifically bound molybdate and tungstate with K(d) 0.29+/-0.12 microM and 0.58+/-0.14 microM, respectively. Additionally binding of molybdate drastically enhanced the thermal stability of the recombinant ModA as compared to the apoprotein. This is the first characterization of a ModA ortholog expressed by a phytopathogen and represents an important tool for functional, biochemical and structural analyses of molybdate transport in Xanthomonas species.

  5. Fire resistant PV shingle assembly

    Science.gov (United States)

    Lenox, Carl J.

    2012-10-02

    A fire resistant PV shingle assembly includes a PV assembly, including PV body, a fire shield and a connection member connecting the fire shield below the PV body, and a support and inter-engagement assembly. The support and inter-engagement assembly is mounted to the PV assembly and comprises a vertical support element, supporting the PV assembly above a support surface, an upper interlock element, positioned towards the upper PV edge, and a lower interlock element, positioned towards the lower PV edge. The upper interlock element of one PV shingle assembly is inter-engageable with the lower interlock element of an adjacent PV shingle assembly. In some embodiments the PV shingle assembly may comprise a ventilation path below the PV body. The PV body may be slidably mounted to the connection member to facilitate removal of the PV body.

  6. Evolution of Enzymatic Activities in the Enolase Superfamily: L-Fuconate Dehydratase from Xanthomonas campestris

    Energy Technology Data Exchange (ETDEWEB)

    Yew,W.; Fedorov, A.; Fedorov, E.; Rakus, J.; Pierce, R.; Almo, S.; Gerlt, J.

    2006-01-01

    Many members of the mechanistically diverse enolase superfamily have unknown functions. In this report the authors use both genome (operon) context and screening of a library of acid sugars to assign the L-fuconate dehydratase (FucD) function to a member of the mandelate racemase (MR) subgroup of the superfamily encoded by the Xanthomonas campestris pv. campestris str. ATCC 33913 genome (GI: 21233491). Orthologues of FucD are found in both bacteria and eukaryotes, the latter including the rTS beta protein in Homo sapiens that has been implicated in regulating thymidylate synthase activity. As suggested by sequence alignments and confirmed by high-resolution structures in the presence of active site ligands, FucD and MR share the same active site motif of functional groups: three carboxylate ligands for the essential Mg2+ located at the ends of th third, fourth, and fifth-strands in the (/)7-barrel domain (Asp 248, Glu 274, and Glu 301, respectively), a Lys-x-Lys motif at the end of the second-strand (Lys 218 and Lys 220), a His-Asp dyad at the end of the seventh and sixth-strands (His 351 and Asp 324, respectively), and a Glue at the end of the eighth-strand (Glu 382). The mechanism of the FucD reaction involves initial abstraction of the 2-proton by Lys 220, acid catalysis of the vinylogous-elimination of the 3-OH group by His 351, and stereospecific ketonization of the resulting 2-keto-3-deoxy-L-fuconate product. Screening of the library of acid sugars revealed substrate and functional promiscuity: In addition to L-fuconate, FucD also catalyzes the dehydration of L-galactonate, D-arabinonate, D-altronate, L-talonate, and D-ribonate. The dehydrations of L-fuconate, L-galactonate, and D-arabinonate are initiated by abstraction of the 2-protons by Lys 220. The dehydrations of L-talonate and D-ribonate are initiated by abstraction of the 2-protons by His 351; however, protonation of the enediolate intermediates by the conjugate acid of Lys 220 yields L

  7. Composition and functional properties of Lupinus campestris protein isolates.

    Science.gov (United States)

    Rodríguez-Ambriz, S L; Martínez-Ayala, A L; Millán, F; Dávila-Ortíz, G

    2005-09-01

    Protein isolates from L. campestris and soybean seeds were prepared using isoelectric precipitation (PI) and micellization (MI) procedures. The amount of protein recovered was considerably higher with the isoelectric precipitation than with the micellization procedure (60% and 30%, respectively). Protein contents were higher than 90% in protein isolates. Antinutritional factors content (alkaloids, lectins, and tannins) were reduced to innocuous levels after protein isolate preparation. Minimum protein solubility for the precipitated lupin protein isolate (LPI) was at pH 4.0, and between pH 4 and 6 for the micellized lupin protein isolate (LMI), increasing at both extremes of the pH scale. Water absorption for the LMI was 1.3 ml/g of protein and its oil absorption 2.2 ml/g of protein. The LPI had 1.7 ml/g of protein in both water and oil absorption. Foaming capacity and stability was pH-dependent. Foaming capacity was higher at pH 2 and lower near the protein isoelectric points. Minimum protein concentration for gelation in LMI was 8% w/v at pH 4, while for LPI was 6% at pH 4 and 6. Amino acid composition in L. campestris flour and protein isolates was high in lysine and low in methionine. Most of the essential amino acids in lupin protein isolates were at acceptable levels compared to a reference pattern for infants and adults. The electrophoretic pattern of both protein isolates showed three bands with different mobilities, suggesting that the protein fractions belong to alpha-conglutin (11S-like protein), beta-conglutin (7S-like protein) and gamma-conglutin. It is proven that some of the functional properties of L. campestris protein isolates are similar to those soybean protein isolates recovered under equal conditions. PMID:16187011

  8. PV power plants

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-07-01

    Within the international seminar of the Ostbayerisches Technologie-Transfer-Institut e.V. (OTTI) at 11th June, 2012 in Munich (Federal Republic of Germany), the following lectures were held: (1) Technical due diligence (Dietmar Obst); (2) Certification / rating system for large PV plants (Robert Pfatischer); (3) O and M requirements (Lars Rulf); (4) IR photography for large scale systems (Bernhard Weinreich); (5) New market models for PV systems - direct marketing and sales of PV electricity (Martin Schneider); (6) Needs and benefits for plant certification for grid connection and operation (Christoph Luetke-Lengerich); (7) Lare volume module testing / Screening in the field and workshop (Semir Merzoug); (8) Dismantling costs of large scale PV plants (Siegfried Schimpf).

  9. Grid integrated distributed PV (GridPV).

    Energy Technology Data Exchange (ETDEWEB)

    Reno, Matthew J.; Coogan, Kyle

    2013-08-01

    This manual provides the documentation of the MATLAB toolbox of functions for using OpenDSS to simulate the impact of solar energy on the distribution system. The majority of the functions are useful for interfacing OpenDSS and MATLAB, and they are of generic use for commanding OpenDSS from MATLAB and retrieving information from simulations. A set of functions is also included for modeling PV plant output and setting up the PV plant in the OpenDSS simulation. The toolbox contains functions for modeling the OpenDSS distribution feeder on satellite images with GPS coordinates. Finally, example simulations functions are included to show potential uses of the toolbox functions. Each function in the toolbox is documented with the function use syntax, full description, function input list, function output list, example use, and example output.

  10. Xanthomonas campestris FabH is required for branched-chain fatty acid and DSF-family quorum sensing signal biosynthesis.

    Science.gov (United States)

    Yu, Yong-Hong; Hu, Zhe; Dong, Hui-Juan; Ma, Jin-Cheng; Wang, Hai-Hong

    2016-01-01

    Xanthomonas campestris pv. campestris (Xcc), a Gram-negative phytopathogenic bacterium, causes black rot disease of cruciferous vegetables. Although Xcc has a complex fatty acid profile comprised of straight-chain fatty acids and branched-chain fatty acids (BCFAs), and encodes a complete set of genes required for fatty acid synthesis, there is still little known about the mechanism of BCFA synthesis. We reported that expression of Xcc fabH restores the growth of Ralstonia solanacearum fabH mutant, and this allows the R. solanacearum fabH mutant to produce BCFAs. Using in vitro assays, we demonstrated that Xcc FabH is able to condense branched-chain acyl-CoAs with malonyl-ACP to initiate BCFA synthesis. Moreover, although the fabH gene is essential for growth of Xcc, it can be replaced with Escherichia coli fabH, and Xcc mutants failed to produce BCFAs. These results suggest that Xcc does not have an obligatory requirement for BCFAs. Furthermore, Xcc mutants lost the ability to produce cis-11-methyl-2-dodecenoic acid, a diffusible signal factor (DSF) required for quorum sensing of Xcc, which confirms that the fatty acid synthetic pathway supplies the intermediates for DSF signal biosynthesis. Our study also showed that replacing Xcc fabH with E. coli fabH affected Xcc pathogenesis in host plants. PMID:27595587

  11. Effect of different fertilizers on nitrogen isotope composition and nitrate content of Brassica campestris.

    Science.gov (United States)

    Yuan, Yuwei; Zhao, Ming; Zhang, Zhiheng; Chen, Tianjin; Yang, Guiling; Wang, Qiang

    2012-02-15

    The effect of different fertilizers on the δ(15)N value, nitrate concentration, and nitrate reductase activity of Brassica campestris and the δ(15)N value of soil has been investigated through a pot experiment. The δ(15)N mean value of B. campestris at the seedling stage observed in the composted chicken treatment (+8.65‰) was higher than that of chemical fertilizer treatment (+5.73‰), compost-chemical fertilizer (+7.53‰), and control check treatment (+7.86‰). There were significantly different δ(15)N values (p fertilizer treatment. The similar results were also found at the middle stage and the terminal stage. The variation of δ(15)N value in soil for different treatments was smaller than that of B. campestris, which was +6.71-+8.12‰, +6.83-+8.24‰, and +6.85-8.4‰, respectively, at seedling stage, middle stage, and terminal stage. With the growth of B. campestris, the nitrate content decreased in all treatments, and the nitrate reductase activity in B. campestris increased except for the CK. Results suggested that the δ(15)N values of B. campestris and soil were more effected by the fertilizer than by the dose level, and the δ(15)N value analysis could be used as a tool to discriminate the B. campestris cultivated with composted manure or chemical fertilizer.

  12. Helping enhances productivity in campo flicker ( Colaptes campestris) cooperative groups

    Science.gov (United States)

    Dias, Raphael Igor; Webster, Michael S.; Macedo, Regina H.

    2015-06-01

    Reproductive adults in many bird species are assisted by non-breeding auxiliary helpers at the nest, yet the impact of auxiliaries on reproduction is variable and not always obvious. In this study, we tested Hamilton's rule and evaluated the effect of auxiliaries on productivity in the facultative cooperative breeder campo flicker ( Colaptes campestris campestris). Campo flickers have a variable mating system, with some groups having auxiliaries and others lacking them (i.e., unassisted pairs). Most auxiliaries are closely related to the breeding pair (primary auxiliaries), but some auxiliaries (secondary auxiliaries) are unrelated females that joined established groups. We found no effect of breeder quality (body condition) or territory quality (food availability) on group productivity, but the presence of auxiliaries increased the number of fledglings produced relative to unassisted pairs. Nonetheless, the indirect benefit of helping was small and did not outweigh the costs of delayed breeding and so seemed insufficient to explain the evolution of cooperative breeding in campo flickers. We concluded that some ecological constraints must limit dispersal or independent breeding, making staying in the group a "best-of-a-bad-job" situation for auxiliaries.

  13. A proteomic analysis of seed development in Brassica campestri L.

    Directory of Open Access Journals (Sweden)

    Wenlan Li

    Full Text Available To gain insights into the protein dynamics during seed development, a proteomic study on the developing Brassica campestri L. seeds with embryos in different embryogenesis stages was carried out. The seed proteins at 10, 16, 20, 25 and 35 DAP (days after pollination, respectively, were separated using two-dimensional gel electrophoresis and identities of 209 spots with altered abundance were determined by matrix-assisted laser desorption ionization time-of-flight/time-of-flight mass spectrometry (MALDI-TOF/TOF MS. These proteins were classified into 16 groups according to their functions. The most abundant proteins were related to primary metabolism, indicating the heavy demand of materials for rapid embryo growth. Besides, the high amount of proteins involved in protein processing and destination indicated importance of protein renewal during seed development. The remaining were those participated in oxidation/detoxification, energy, defense, transcription, protein synthesis, transporter, cell structure, signal transduction, secondary metabolism, transposition, DNA repair, storage and so on. Protein abundance profiles of each functional class were generated and hierarchical cluster analysis established 8 groups of dynamic patterns. Our results revealed novel characters of protein dynamics in seed development in Brassica campestri L. and provided valuable information about the complex process of seed development in plants.

  14. Fruit consumption by Colaptes campestris (Aves, Picidae at Emas National Park, Brazil

    Directory of Open Access Journals (Sweden)

    Dárius Pukenis Tubelis

    2007-12-01

    Full Text Available Although woodpeckers are primarily insectivorous birds, some species feed on fruits and flowers occasionally or regularly. Most records of fruit consumption by Colaptes species have involved C. melanochloros; there have been few records of C. campestris. This study aimed to report on frugivory by C. campestris at Emas National Park, Goias. In early March 2007, two individuals were seen feeding on fruits of Palicourea rigida (Rubiaceae in a patch of ‘campo sujo’ vegetation. These are the first records of consumption of fruits of native species by Colaptes campestris in Cerrado.

  15. Environmental control in tea fields to reduce infection by Pseudomonas syringae pv. theae.

    Science.gov (United States)

    Tomihama, T; Nonaka, T; Nishi, Y; Arai, K

    2009-02-01

    Bacterial shoot blight (BSB) disease, caused by Pseudomonas syringae pv. theae, is a major bacterial disease of tea plants in Japan. BSB mainly occurs in the low-temperature season, and lesion formation by P. syringae pv. theae is enhanced by both low temperature and the presence of ice nucleation-active Xanthomonas campestris (INAX), which catalyzes ice formation at -2 to -4 degrees C and is frequently co-isolated with P. syringae pv. theae from tea plants. Low temperature is thus the most important environmental factor influencing the incidence of BSB; however, the effects of low temperature on infection of the host by P. syringae pv. theae and of environmental controls in fields on the occurrence of the disease are poorly understood. In this study, we show that ice formation on tea leaves by INAX enhanced P. syringae pv. theae invasion into leaf tissue. The natural incidence of BSB in the field was closely related to early autumn frost. Frost protection in late autumn, which prevented ice formation on tea plants, significantly decreased the incidence of BSB, and frost protection combined with bactericide application held the incidence under the economic threshold level. Our data indicate that environmental control in the field based on microbial interactions in the host offers a new strategy for plant disease control. PMID:19159313

  16. PV-WEB: internet-based PV information tool

    Energy Technology Data Exchange (ETDEWEB)

    Cowley, P.

    2003-07-01

    This report gives details of a project to create a web-based information system on photovoltaic (PV) systems for the British PV Association (PV-UK) for use by decision makers in government, the utilities, and the housing and construction sectors. The project, which aims to provide an easily accessible tool for UK companies, promote PV technology, increase competitiveness, and identify market opportunities, is described. The design of the web site and its implementation and the evolution are discussed, along with the maintenance of the site by PV-UK and the opportunities offered to PV-UK Members.

  17. PV-WEB: internet-based PV information tool

    International Nuclear Information System (INIS)

    This report gives details of a project to create a web-based information system on photovoltaic (PV) systems for the British PV Association (PV-UK) for use by decision makers in government, the utilities, and the housing and construction sectors. The project, which aims to provide an easily accessible tool for UK companies, promote PV technology, increase competitiveness, and identify market opportunities, is described. The design of the web site and its implementation and the evolution are discussed, along with the maintenance of the site by PV-UK and the opportunities offered to PV-UK Members

  18. Global PV Market Development

    International Nuclear Information System (INIS)

    The dawn of 2009 saw several events which caused major turbulence in the global photovoltaic industry. In 2008 the Spanish PV market grew beyond all expectations and even outranked Germany as the world's number one market. However, the promotion scheme was modified and a market cap was introduced in 2009, cutting back the maximum capacity to be installed to about the level of 2007. In addition, the industry is facing an oversupply of PV modules and a harsh recession which is significantly affecting the traditionally strong PV markets. International photovoltaic companies are challenged by a changing market situation: all of a sudden, competition has increased significantly, pushing the customer to the fore. As a result, a consolidation process is expected within the PV industry worldwide. However, the story is not all negative. In the U.S., the election of Barack Obama may be seen as the starting signal for a massive expansion in PV, likely to bring the country to first place globally within the next five years. Furthermore, different markets and market segments are being opened up - especially in Europe - thanks to the gradual arrival of generation parity and new PV support mechanisms. EuPD Research has observed and studied international PV markets since its foundation. The information included in the presentation is based on a wide range of quantitative and qualitative studies that EuPD Research has conducted in the key markets since 2002. Florian Schmidt, EuPD Research's Head of Product Management, will give an overview of the global PV market and how it is developing in this crucial year 2009. Aspects such as technology development, production capacities and the demand side will be included, with a special emphasis on the European PV markets. So far Chinese PV companies have often benefited from the booming PV markets in Europe, above all Germany and Spain. Due to the lack of domestic market, the Chinese industry strongly depends on the export and is

  19. Clustering of Mutations Blocking Synthesis of Xanthan Gum by Xanthomonas campestris

    OpenAIRE

    Thorne, L.; Tansey, L.; Pollock, T J

    1987-01-01

    Mutations that block the synthesis of xanthan gum by Xanthomonas campestris B1459S-4L-II were isolated as nonmucoid colonies after treatment with ethyl methanesulfonate. Complete libraries of DNA fragments from wild-type X. campestris were cloned into Escherichia coli by using a broad-host-range cosmid vector and then transferred into each mutant strain by conjugal mating. Cloned fragments that restored xanthan gum synthesis (Xgs+; mucoidy) were compared according to restriction pattern, DNA ...

  20. Tranformasi Fragmen Dna Kromosom Xanthomonas Campestris ke dalam Escherichia Coli

    Directory of Open Access Journals (Sweden)

    Wibowo Mangunwardoyo

    2002-04-01

    Full Text Available Research on DNA transformation of Xanthomonas campestris into Escherichia coli DH5αα using plasmid vector Escherichia coli (pUC19. was carried out. DNA chromosome was isolated using CTAB method, alkali lysis method was used to isolate DNA plasmid. Both of DNA plasmid and chromosome were digested using restriction enzyme EcoRI. Competent cell was prepared with CaCl2 and heat shock method for transformation procedure. The result revealed transformation obtain 5 white colonies, with transformation frequency was 1,22 x 10-8 colony/competent cell. Electrophoresis analysis showed the DNA fragment (insert in range 0.5 – 7,5 kb. Further research should be carried out to prepare the genomic library to obtain better result of transformant.

  1. Investors favour PV over CSP

    Energy Technology Data Exchange (ETDEWEB)

    Cohn, Lisa; Smith, Reid

    2011-07-01

    A couple of years ago, CSP seemed to be the utility-scale solar electricity of the future. Now costs for PV systems have declined so much quicker that some investors have changed their plans from CSP to PV. (orig.)

  2. PV investment in Europe

    Energy Technology Data Exchange (ETDEWEB)

    Hueser, Pius [Nova Energy GmbH, (Switzerland)

    2007-06-15

    This presentation is mainly about how the PV market in Europe has been growing, and which elements are going to determine if this market succeed or failed not only in Europe but also in the rest of the world. In the first part of this presentation, it is mentioned how in 2005 the development of some PV technologies triggered the PV market growth without any marketing control. Then, there are explained the aspects that changed such situation out of control, therefore, it emerged the beginning of the consolidation of this market. There are briefly explained those factors that are going to determine if this market succeed or failed in the future. Finally, there are given examples of some the PV investments. [Spanish] Esta presentacion habla principalmente de la manera en como ha crecido el Mercado de sistemas fotovoltaicos en Europa, asi tambien se mencionan los elementos fundamentales que determinaran el exito o fracaso de este mercado, no solamente en Europa sino tambien en el resto del mundo, en un futuro. En la primera parte de esta presentacion, se describe como en el 2005, debido al desarrollo de algunas tecnologias fotovoltaicas se desencadeno el crecimiento desenfrenado del mercado fotovoltaico. Despues, se explican los aspectos que hicieron que dicho crecimiento tomara su curso, teniendo como resultado el inicio de un mercado mas consolidado. Se explican brevemente los factores que determinaran si este mercado encuentra el exito o el fracaso en un futuro. Finalmente, se dan ejemplos de algunas adquisiciones fotovoltaicas.

  3. Firefighter Safety for PV Systems

    DEFF Research Database (Denmark)

    Mathe, Laszlo; Sera, Dezso; Spataru, Sergiu;

    2015-01-01

    An important and highly discussed safety issue for photovoltaic (PV) systems is that as long as the PV panels are illuminated, a high voltage is present at the PV string terminals and cables between the string and inverters that is independent of the state of the inverter's dc disconnection switc....... The presence of these energized conductors on the dc side of the PV system can pose a danger to anyone performing maintenance or firefighting....

  4. Testing for PV Reliability (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Kurtz, S.; Bansal, S.

    2014-09-01

    The DOE SUNSHOT workshop is seeking input from the community about PV reliability and how the DOE might address gaps in understanding. This presentation describes the types of testing that are needed for PV reliability and introduces a discussion to identify gaps in our understanding of PV reliability testing.

  5. PV potential and potential PV rent in European regions

    DEFF Research Database (Denmark)

    Hansen, Anders Chr.; Thorn, Paul

    2013-01-01

    of PV-­‐electricity. Combined with the potential density of PV-­‐panel area based on land cover and environental restrictions, the PV energy potential and the potential PV ressource rent is calculated. These calculations enbable the model to estimate the regional patterns at NUTS 2 level......The paper provides a GIS based model for assessing the potentials of photovoltaic electricity in Europe by NUTS 2 regions. The location specific energy potential per PV-­‐panel area is estimated based on observations of solar irradiation, conversion efficiency, levelised costs and the social value...

  6. Biocatalytic Synthesis of a-Arbutin by the Intracellular Crude Enzyme from Xanthomonas Campestris%野油菜黄单胞菌胞内粗酶液催化合成α-熊果苷

    Institute of Scientific and Technical Information of China (English)

    张欣英; 严伟; 李群良; 姚评佳; 魏远安; 唐纪良

    2012-01-01

    Biocatalytic synthesis of α-arbutin by the intracellular crude enzyme from Xanthomonas campes-tris pv. campestris 8004 was studied. The effects of hydroquinone concentration,reactant molar ratio,buffer solution pH value,reaction time and cell concentration on the reaction were investigated. The results showed that the optimum reaction conditions were as follows: the reaction temperature was 35℃ ,the rotational speed was 180 r·min-1,hydroquinone concentration was 40 mmol· L-1 ,the molar ratio of hydroquinone to sucrose was 1:30,the buffer solution pH value was 7.0,the reaction time was 36 h,the cell concentration was 80 mg·mL-1 . Under above conditions,α-arbutin content reached 6. 58 mg·mL-1 ,the selectivity of hydroquinone was 66%,and the conversion rate of hydroquinone was 91%.%利用野油菜黄单胞菌(Xanthomonas campestris pv.campestris) 8004胞内粗酶液生物催化合成α-熊果苷,察了对苯二酚浓度、反应物摩尔比、缓冲溶液pH值、反应时间、菌体浓度等因素对反应的影响.确定最佳反应条件为:应温度35℃、摇床转速180 r·min-1、对苯二酚浓度40mmol·L-1、对苯二酚与蔗糖的摩尔比1∶30、缓冲溶液pH7.0、反应时间36 h、菌体浓度80 mg·mL-1,在此条件下,α-熊果苷含量达到6.58mg· mL-1、对苯二酚选择性为66 %对苯二酚转化率为91%.

  7. Bioconcentration factors (BCF) of silver in wild Agaricus campestris

    Energy Technology Data Exchange (ETDEWEB)

    Falandysz, J.; Danisiewicz, D. [Univ. of Gdansk (Poland)

    1995-07-01

    Silver is an element naturally occurring in small concentrations in different environmental sites. However, many anthropogenic sources of silver led to contamination of this element in soil surfaces, pastures, and coastal marine areas in different parts of the world. Estimates are that 40% of the 1.15x10{sup 4}t of silver produced annually worldwide, will escape into the environment. Due to municipal waste discharge and/or industrial effluents with high silver concentrations, 100 x above the background level have been reported in invertebrate species from polluted marine areas. The meta-stabile radioisotope, {sup 110m}Ag, is a main component of the liquid effluents from nuclear facilities under normal operating conditions. The presence of {sup 111}Ag and {sup 110m}Ag also has been widely found throughout Europe in the 1986 Chernobyl fallout. Silver ions are environmentally harmful. High toxic effects have been observed at low concentrations, especially in aquatic species. Species of lower fungi as well as the mushroom Agaricus bisporus are know to bioaccumulate high concentrations of silver when grown on an artificially enriched substrate. This study looks at the relationship between the silver content of soil and bioconcentration potential of wild Agaricus campestris from sites under different use and with different concentrations of heavy metals. 28 refs., 2 figs., 2 tabs.

  8. PV water pumping: NEOS Corporation recent PV water pumping activities

    Energy Technology Data Exchange (ETDEWEB)

    Lane, C.

    1995-11-01

    NEOS Corporation has been very active in PV-powered water pumping, particularly with respect to electric utilities. Most of the recent activity has been through the Photovoltaic Services Network (PSN). The PSN is an independent, not-for-profit organization comprised of all types of electric utilities: rural electric coops, public power districts, investor-owned utilities, and power marketing agencies. The PSN`s mission is to work pro-actively to promote utility involvement in PV through education and training. PV information is distributed by the PSN in three primary forms: (1) consultation with PSN technical service representatives: (2) literature generated by the PSN; and (3) literature published by other organizations. The PSN can also provide assistance to members in developing PV customer service programs. The PSN`s product support activities include consolidation of information on existing packaged PV systems and facilitation of the development of new PV product packages that meet utility-defined specifications for cost performance, and reliability. The PSN`s initial product support efforts will be focused on commercially available packaged PV systems for a variety of off-grid applications. In parallel with this effort, if no products exist that meet the PSN`s functional specifications, the PSN will initiate the second phase of product development support process by encouraging the development of new packaged systems. Through these services and product support activities, the PSN anticipates engaging all segments for the PV industry, thus providing benefits to PV systems suppliers as well as local PV service contractors.This paper describes field testing of pv power systems for water pumping.

  9. Production and cytogenetics of Brassica campestris-alboglabra chromosome addition lines

    DEFF Research Database (Denmark)

    Chen, B.Y.; Cheng, B.F.; Bagger Jørgensen, Rikke;

    1997-01-01

    Four different Brassica campestris-alboglabra monosomic addition lines (AA + 1 chromosome from C, 2n = 21) were obtained after consecutive backcrosses between resynthesized B. napus (AACC, 2n = 38) and the parental B. campestris (AA, 2n = 20) accession. The alien chromosomes of B. alboglabra (CC, 2......n = 18) in the addition lines were distinguished by random amplified polymorphic DNA (RAPD) marker analysis and morphology of mitotic chromosomes. Four RAPD marker synteny groups were established, which represented the four different alien chromosomes of B. alboglabra in the four addition lines...

  10. Sensorless PV Array Diagnostic Method for Residential PV Systems

    DEFF Research Database (Denmark)

    Sera, Dezso; Spataru, Sergiu; Mathe, Laszlo;

    2011-01-01

    This work proposes a temperature and irradiance sensorless diagnostic method suitable for small residential PV installations, focusing on detection of partial shadows. The method works by detection of failures in crystalline silicone PV arrays by concomitant monitoring of some of their key...

  11. Interband cascade (IC) photovoltaic (PV) architecture for PV devices

    Science.gov (United States)

    Yang, Rui Q.; Tian, Zhaobing; Mishima, Tetsuya D.; Santos, Michael B.; Johnson, Matthew B.; Klem, John F.

    2015-10-20

    A photovoltaic (PV) device, comprising a PV interband cascade (IC) stage, wherein the IC PV stage comprises an absorption region with a band gap, the absorption region configured to absorb photons, an intraband transport region configured to act as a hole barrier, and an interband tunneling region configured to act as an electron barrier. An IC PV architecture for a photovoltaic device, the IC PV architecture comprising an absorption region, an intraband transport region coupled to the absorption region, and an interband tunneling region coupled to the intraband transport region and to the adjacent absorption region, wherein the absorption region, the intraband transport region, and the interband tunneling region are positioned such that electrons will flow from the absorption region to the intraband transport region to the interband tunneling region.

  12. Minimal Phenotypic Test for Simple Differentiation of Xanthomonas Campestris from other Yellow-Pigmented Bacteria Isolated from Soil

    Directory of Open Access Journals (Sweden)

    MR Soudi

    2011-06-01

    Full Text Available Background and Objectives: Isolation of Xanthomonas campestris from soil has a wide range of applications from monitoring of phytopathogenic populations in soil to screening of improved xanthan-producing strains. Identification of Xanthomonas campestris and its pathovars requires pathogenicity tests in addition to phenotypic and molecular characterization.Materials and Methods: Thirty phenotypic tests were carried out on 57 yellow-pigmented bacterial isolates obtained from soil of cabbage farms after screening on Selective Xanthomonas (SX agar and transferring on Yeast Malt agar. Absorption spectra of pigments and capability of biopolymer production were determined for the isolates. Some characteristics of the biopolymer produced and presence of a X. campestris-specific gene marker were investigated for nine putative X. campestris isolates.Results: The present study introduces a set of simple phenotypic tests including urease, acid production from sucrose, mucoid growth on 5% sucrose, starch hydrolysis, growth in 4% NaCl, motility and utilization of asparagine as sole carbon and nitrogen source for quick and inexpensive tentative identification of Xanthomonas campestris. Validation of these tests was confirmed in 100% of the cases by characterization of bacterial exopolysaccharide as xanthan and production of genus-specific xanthomonadin pigment. Moreover, tracking of hrc gene among putative X. campestris isolates gave positive results in 80% of cases.Conclusion: The Minimal simple phenotypic tests facilitate the screening and differentiation of putative X. campestris isolates from other false bacterial strains isolated from soil on semiselective SX agar.

  13. Effect of seed-irradiation on morphological characters yield components of brassica campestris var. sarson

    International Nuclear Information System (INIS)

    Seed of Brassica campestris (var. Sarson) were used to study the effect of radiation of different morphological and yield parameters. Survival percentage showed drastic decrease at higher doses (75 Kr and 100 Kr). Similarly all characters showed a trend of decrease with increasing dose. LD50 for Brassica was about 50 Kr. (author)

  14. Study on the spectral response of Brassica Campestris L. leaf to the copper pollution

    Institute of Scientific and Technical Information of China (English)

    LIU SuHong; LIU XinHui; HOU Juan; CHI GuangYu; CUI BaoShan

    2008-01-01

    Brassica Campestis L. was cultivated in the soil at the laboratory. The red edge, the visual spectrum and the near-infrared spectrum of Brassica Campestis L. leaf were used to explore the spectral response of Brassica Campestis L. leaf to the copper stress. As the Cu content in the soil gets increased, the copper level in Brassica Campestris L. leaf would be increased, and the chlorophyll level in Brassica Campestris L. leaf would be decreased. As a result, the visual spectral reflectance (A1) of Brassica Campestris L. leaf is increased, and the blue-shift (moving towards the shorter waveband) degree (S) of the red edge (the ascending region of the reflectivity at 680-740 nm) gets increased. However, the near-infrared spectral reflectance (A2) decreases. With the correlation coefficient R2 more than 0.95, these parameters of A1,A2 and S can be perfectly used to simulate and predict the copper level in Brassica Campestris L. leaf.

  15. Study on the spectral response of Brassica Campestris L. leaf to the copper pollution

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Brassica Campestis L. was cultivated in the soil at the laboratory. The red edge,the visual spectrum and the near-infrared spectrum of Brassica Campestis L. leaf were used to explore the spectral response of Brassica Campestis L. leaf to the copper stress. As the Cu content in the soil gets increased,the copper level in Brassica Campestris L. leaf would be increased,and the chlorophyll level in Brassica Campestris L. leaf would be decreased. As a result,the visual spectral reflectance (A1) of Brassica Campestris L. leaf is increased,and the blue-shift (moving towards the shorter waveband) degree (S) of the red edge (the ascending region of the re-flectivity at 680―740 nm) gets increased. However,the near-infrared spectral re-flectance (A2) decreases. With the correlation coefficient R2 more than 0.95,these parameters of A1,A2 and S can be perfectly used to simulate and predict the copper level in Brassica Campestris L. leaf.

  16. Growth and xanthan production of Xanthomonas campestris depending on the N-source concentration

    Energy Technology Data Exchange (ETDEWEB)

    Prell, A. [Academy of Sciences of the Czech Republic, Prague (Czech Republic). Inst. of Microbiology; Lasik, J. [Academy of Sciences of the Czech Republic, Prague (Czech Republic). Inst. of Microbiology; Konicek, J. [Academy of Sciences of the Czech Republic, Prague (Czech Republic). Inst. of Microbiology; Sobotka, M. [Academy of Sciences of the Czech Republic, Prague (Czech Republic). Inst. of Microbiology; Sys, J. [Academy of Sciences of the Czech Republic, Prague (Czech Republic). Inst. of Microbiology

    1995-11-01

    Growth of X. campestris and production of xanthan were studied in several batch fermentations with different starting concentrations of N-source. The dependencies of growth, productivity and yields on initial N-source concentration were observed. The maximum yields in the course of cultivations were identified. (orig.)

  17. Genome Sequence of Xanthomonas campestris JX, an Industrially Productive Strain for Xanthan Gum

    OpenAIRE

    Tao, Fei; Wang, Xia; Ma, Cuiqing; Yang, Chunyu; Tang, Hongzhi; Gai, Zhonghui; Xu, Ping

    2012-01-01

    Xanthomonas campestris JX, a soil bacterium, is an industrially productive strain for xanthan gum. Here we present a 5.0-Mb assembly of its genome sequence. We have annotated 12 coding sequences (CDSs) responsible for xanthan gum biosynthesis, 346 CDSs encoding carbohydrate metabolism, and 69 CDSs related to virulence, defense, and plant disease.

  18. Speedometers for PV generators; Drehzahlmesser fuer PV-Generatoren

    Energy Technology Data Exchange (ETDEWEB)

    Fritze, Peter; Weinreich, Bernhard [Solarschmiede GmbH, Muenchen (Germany). Engineering-Abt.

    2011-05-31

    To measure the generator power of an installed PV system, it is not enough to look into the specifications of hte module producers. Fast and independent data can be provided by characteristic curve meters.

  19. INFLUENCE OF EPIDEMIOLOGICAL FACTORS ON THE BIOHERBICIDAL EFFICACY OF A Xanthomonas campestris ISOLATE ON COMMON COCKLEBUR ( Xanthium strumarium )

    OpenAIRE

    C. Douglas Boyette; Robert E. Hoagland

    2013-01-01

    Greenhouse and controlled-environment studies were conducted to determine the effects of incubation temperature, dew period temperature, dew period duration, plant growth stage, and cell concentration on the bioherbicidal efficacy of a highly virulent isolate (LVA987) of the bacterial pathogen,Xanthomonas campestris, against Xanthium strumarium (common cocklebur). X. campestris infected cocklebur at 20, 25, 30, and 35ºC but the disease achieved at 20ºC was not sufficient to cause high plant m...

  20. Genetic and Physical Analyses of a Cluster of Genes Essential for Xanthan Gum Biosynthesis in Xanthomonas campestris

    OpenAIRE

    Harding, N E; Cleary, J M; Cabañas, D K; Rosen, I G; K.S. Kang

    1987-01-01

    Xanthomonas campestris produces copious amounts of a complex exopolysaccharide, xanthan gum. Nonmucoid mutants, defective in synthesis of xanthan polysaccharide, were isolated after nitrosoguanidine mutagenesis. To isolate genes essential for xanthan polysaccharide synthesis (xps), a genomic library of X. campestris DNA, partially digested with SalI and ligated into the broad-host-range cloning vector pRK293, was constructed in Escherichia coli. The pooled clone bank was conjugated en masse f...

  1. PSCAD Modules Representing PV Generator

    Energy Technology Data Exchange (ETDEWEB)

    Muljadi, E.; Singh, M.; Gevorgian, V.

    2013-08-01

    Photovoltaic power plants (PVPs) have been growing in size, and the installation time is very short. With the cost of photovoltaic (PV) panels dropping in recent years, it can be predicted that in the next 10 years the contribution of PVPs to the total number of renewable energy power plants will grow significantly. In this project, the National Renewable Energy Laboratory (NREL) developed a dynamic modeling of the modules to be used as building blocks to develop simulation models of single PV arrays, expanded to include Maximum Power Point Tracker (MPPT), expanded to include PV inverter, or expanded to cover an entire PVP. The focus of the investigation and complexity of the simulation determines the components that must be included in the simulation. The development of the PV inverter was covered in detail, including the control diagrams. Both the current-regulated voltage source inverter and the current-regulated current source inverter were developed in PSCAD. Various operations of the PV inverters were simulated under normal and abnormal conditions. Symmetrical and unsymmetrical faults were simulated, presented, and discussed. Both the three-phase analysis and the symmetrical component analysis were included to clarify the understanding of unsymmetrical faults. The dynamic model validation was based on the testing data provided by SCE. Testing was conducted at SCE with the focus on the grid interface behavior of the PV inverter under different faults and disturbances. The dynamic model validation covers both the symmetrical and unsymmetrical faults.

  2. Flavonóides O-glicosilados de Croton campestris St. Hill. (Euphorbiaceae Glycosyl flavonoids from Croton campestris St. Hill. (Euphorbiaceae

    Directory of Open Access Journals (Sweden)

    Paula M.L. dos Santos

    2005-12-01

    Full Text Available Do extrato butanólico de Croton campestris St. Hill. (Euphorbiaceae foram isolados quatro flavonóides, todos O-glicosídeos da quercetina. Estas substâncias foram identificadas como 3-O-b-D-apiofuranosil-(1®2-galactopiranosil quercetina (1, 3-O-b-D-galactopiranosil quercetina (hiperina (2, 3-O-a-L-arabinopiranosil quercetina (guaijaverina (3 e 3-O-a-L-ramnopiranosil quercetina (quercitrina (4.O presente trabalho relata a presença destas substâncias pela primeira vez para esta espécie de Croton, cuja elucidação estrutural deu-se por espectroscopia em UV, EM e RMN, incluindo as técnicas bidimensionais: ¹H-¹H (2D NOESY, 2D COSY, ¹H-13C (2D HETCOR e 13C (APT, além de comparações com os dados da literatura.Four flavonoids were isolated from the butanolic extract of the aerial parts of Croton campestris St. Hill. (Euphorbiaceae. These compounds were identified as 3-O-b-D-apiofuranosyl-(1®2-galactopyranoside quercetin (1, 3-O-b-D-galactopyranoside quercetin (hyperin (2, 3-O-a-L-arabinopyranoside quercetin (guaijaverin (3 and 3-O-a-L-ramnopyranoside quercetin (quercitrin (4. They have been isolated for the first time from Croton campestris. Their structures were elucidated by UV, MS and NMR experiments including ¹H-¹H (2D NOESY, 2D COSY, ¹H-13C (2D HETCOR, 13C (APT and by comparison of the spectral data with those reported in the literature.

  3. Locational Sensitivity Investigation on PV Hosting Capacity and Fast Track PV Screening

    Energy Technology Data Exchange (ETDEWEB)

    Ding, Fei; Mather, Barry; Ainsworth, Nathan; Gotseff, Peter; Baker, Kyri

    2016-05-05

    A 15% PV penetration threshold is commonly used by utilities to define photovoltaic (PV) screening methods where PV penetration is defined as the ratio of total solar PV capacity on a line section to peak load. However, this method doesn't take into account PV locational impact or feeder characteristics that could strongly change the feeder's capability to host PVs. This paper investigates the impact of PV location and phase connection type on PV hosting capacity, and then proposes a fast-track PV screening approach that leverages various PV hosting capacity metric responding to different PV locations and types. The proposed study could help utilities to evaluate PV interconnection requests and also help increase the PV hosting capacity of distribution feeders without adverse impacts on system voltages.

  4. Flavonóides O-glicosilados de Croton campestris St. Hill. (Euphorbiaceae) Glycosyl flavonoids from Croton campestris St. Hill. (Euphorbiaceae)

    OpenAIRE

    Paula M.L. dos Santos; Jan Schripsema; Ricardo M. Kuster

    2005-01-01

    Do extrato butanólico de Croton campestris St. Hill. (Euphorbiaceae) foram isolados quatro flavonóides, todos O-glicosídeos da quercetina. Estas substâncias foram identificadas como 3-O-b-D-apiofuranosil-(1®2)-galactopiranosil quercetina (1), 3-O-b-D-galactopiranosil quercetina (hiperina) (2), 3-O-a-L-arabinopiranosil quercetina (guaijaverina) (3) e 3-O-a-L-ramnopiranosil quercetina (quercitrina) (4).O presente trabalho relata a presença destas substâncias pela primeira vez para esta espécie ...

  5. Effect of virulence and serial transfers of Xanthomonas campestris on xanthan gum production

    Directory of Open Access Journals (Sweden)

    Nitschke Marcia

    2000-01-01

    Full Text Available The virulence of six Xanthomonas campestris isolates was evaluated using the percentage of lesion area of leaves in Brassica oleraceae host plant, compared to diameter of colonies, xanthan production and gum viscosity. In terms of virulence, the isolates belonged to two statistically different groups: isolates B, UPF and C7 showed values between 52 and 69%, while isolates CF, C and strain B-1459 gave 0-30% of lesion area. Final xanthan concentration, gum viscosity and colony diameter did not correlate with virulence calculated by percentage of lesion area, showing that this parameter is not a good criterium for selection of potential xanthan producer isolates. Serial transfers of X. campestris isolates in host plant did not show a significant effect on "in vitro" production of xanthan or on viscosity levels, suggesting that the increasing interaction between plant and bacteria did not stimulate the increase in xanthan production and viscosity.

  6. Growth of Agaricus campestris NRRL 2334 in the Form of Pellets

    OpenAIRE

    Martin, Antonio M.; Bailey, Valerie I.

    1985-01-01

    The production of pellets of the fungus Agaricus campestris NRRL 2334 was studied in submerged fermentation with peat extract as the main substrate source. Pellets up to 6 mm in diameter were obtained when the peat extract was diluted to reduce the concentration of growth inhibitors. Yeast extract and yeast extract plus glucose were the most effective nutrient supplements in the diluted peat extract media and stimulated the formation of large pellets which contained 44.4% crude protein, 2.8% ...

  7. Effect of virulence and serial transfers of Xanthomonas campestris on xanthan gum production

    OpenAIRE

    Nitschke Marcia; Rodrigues Vanessa

    2000-01-01

    The virulence of six Xanthomonas campestris isolates was evaluated using the percentage of lesion area of leaves in Brassica oleraceae host plant, compared to diameter of colonies, xanthan production and gum viscosity. In terms of virulence, the isolates belonged to two statistically different groups: isolates B, UPF and C7 showed values between 52 and 69%, while isolates CF, C and strain B-1459 gave 0-30% of lesion area. Final xanthan concentration, gum viscosity and colony diameter did not ...

  8. Small scale production and characterization of xanthan gum synthesized by local isolates of Xanthomonas campestris.

    Science.gov (United States)

    Barua, Rajesh; Alam, Md Jahangir; Salim, Mohammad; Ashrafee, Tamzida Shamim

    2016-02-01

    Xanthan gum is a commercially important microbial exopolysaccharide (EPS) produced by Xanthomonas campestris. X. campestris is a plant pathogen causing various plant diseases such as black rot of crucifers, bacterial leaf blight and citrus canker disease resulting in crop damage. In this study, we isolated efficient local bacterial isolates which are capable to produce xanthan gum utilizing different sources of carbon (maltose, sucrose and glucose). Bacterial isolates from different plant leaves and fruits were identified as Xanthomonas campestris based on their morphological and biochemical characteristics. Among the 23 isolates, 70% were capable of producing gum. Taro plant, considered as new bacterial host, also have the capability to produce xanthan gum. Production conditions of xanthan gum and their relative viscosity by these bacterial isolates were optimized using basal medium containing commercial carbon and nitrogen sources and various temperature and rotation. Highest level of xanthan gum (18.286 g/l) with relative viscosity (7.2) was produced (Host, Citrus macroptera) at 28 degrees C, pH 7.0, 150 rpm using sucrose as a carbon source at orbital shaker. Whereas, in lab fermenter, same conditions gave best result (19.587 g/l gum) with 7.8 relative viscosity. Chilled alcohol (96%) was used to recover the xanthan gum. FTIR studies also carried out for further confirmation of compatibility by detecting the chemical groups. PMID:26934783

  9. Comparison of Pyranometers vs. PV Reference Cells for Evaluation of PV Array Performance

    Energy Technology Data Exchange (ETDEWEB)

    Dunn, L.; Gostein, M.; Emery, K.

    2012-09-01

    As the photovoltaics (PV) industry has grown, the need for accurately monitoring the solar resource of PV power plants has increased. Historically, the PV industry has relied on thermopile pyranometers for irradiance measurements, and a large body of historical irradiance data taken with pyranometers exists. However, interest in PV reference devices is increasing. In this paper, we discuss why PV reference devices are better suited for PV applications, and estimate the typical uncertainties in irradiance measurements made with both pyranometers and PV reference devices. We assert that the quantity of interest in monitoring a PV power plant is the equivalent irradiance under the IEC 60904-3 reference solar spectrum that would produce the same electrical response in the PV array as the incident solar radiation. For PV-plant monitoring applications, we find the uncertainties in irradiance measurements of this type to be on the order of +/-5% for thermopile pyranometers and +/-2.4% for PV reference devices.

  10. Solar PV. Innovators talking; Zon PV. Innovators aan het woord

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-02-15

    Qualitative studies have been conducted of the results of completed projects focused on energy innovation, spread over the seven themes of the top sector Energy: Energy saving in industry, Energy conservation in the built environment, Gas, Bio-energy, Smart grids, Offshore Wind, Solar PV. This provides insight into the follow-up activities and lessons of some EOS (Energy Research Subsidy) completed projects with the aim to inspire, connect and strengthen the TKIs (Topconsortia for Knowledge and Innovation) and individual companies and researchers working on energy innovation. This report concerns the research on solar PV [Dutch] Er is een kwalitatief onderzoek uitgevoerd naar de resultaten van afgeronde projecten gericht op energie-innovatie, verdeeld over de zeven thema's van de topsector Energie: Energiebesparing in de industrie; Energiebesparing in de gebouwde omgeving; Gas; Bio-energie; Smart grids; Wind op zee; Zon-pv. Daarmee wordt inzicht gegeven in de vervolgactiviteiten en lessen van een aantal afgesloten EOS-projecten (Energie Onderzoek Subsidie) met het oog op het inspireren, verbinden en versterken van de TKI's (Topconsortia voor Kennis en Innovatie) en individuele bedrijven en onderzoekers die werken aan energie-innovatie. Dit rapport betreft het onderzoek naar zon PV.

  11. Xanthomonas oryzae pv oryzae the Causal Agent of Bacterial Leaf Blight of rice: Isolation, Characterization, and Study of Transposon Mutagenesis

    Directory of Open Access Journals (Sweden)

    Abdjad Asih Nawangsih

    2011-04-01

    Full Text Available Xanthomonas oryzae pv oryzae the Causal Agent of Bacterial Leaf Blight of rice: Isolation, Characterization, and Study of Transposon Mutagenesis. X. oryzae pv. oryzae (Xoo causes bacterial leaf blight (BLB of rice (Oryza sativa L., a major disease that constrains production of the staple crop in many countries of the world. Identification of X. oryzae pv. oryzae (Xoo was conducted based on the disease symptoms, pathogenicity, morphological, physiological, and genetic characteristics of bacterial cultures isolated from the infected plants. Fifty bacterial isolates predicted as Xoo have been successfully isolated. They are aerobic, rod shaped, and Gram negative bacteria. The isolates were evaluated for their hypersensitivity in tobacco and pathogenicity in rice plant. Fifty isolates induced hypersensitive reaction in tobacco and showed pathogenicity symptom in rice in different length. Based on physiological test, hypersensitivity and pathogenicity reactions, three bacterial isolates strongly predicted as Xoo, i.e. STG21, STG42, and STG46, were non indole formation, non pigment fluorescent, hydrolyzed casein, catalase activity positive, but negative oxidase. Partial sequencing of 16S rRNA genes of STG21 and STG42 showed 80% and 82% homology with X. oryzae, respectively, while STG46 showed 84% homology with X. campestris. Mini-Tn5 transposon mutagenesis of STG21 generated one of the mutants (M5 lossed it’s ability to induce hypersensitive reaction in tobacco plant and deficient in pathogenicity on rice. The lesion length of rice leaf caused by the mutant M5 decreased up to 80%.

  12. Photovoltaics for Buildings Cutting-Edge PV

    International Nuclear Information System (INIS)

    Photovoltaic (PV) technology development for building-integrated applications (commonly called PV for Buildings) is one of the fastest growing areas in the PV industry. Buildings represent a huge potential market for photovoltaics because they consume approximately two-thirds of the electricity consumed in the US. The PV and buildings industries are beginning to work together to address issues including building codes and standards, integration, after-market servicing, education, and building energy efficiency. One of the most notable programs to encourage development of new PV-for-buildings products is the PV:BONUS program, supported by the US Department of Energy. Demand for these products from building designers has escalated since the program was initiated in 1993. This paper presents a range of PV-for-buildings issues and products that are currently influencing today's PV and buildings markets

  13. PV supply chain growing pains

    International Nuclear Information System (INIS)

    This article discussed issues involving the supply chain for photovoltaic (PV) equipment that is emerging in Ontario as a result of the Feed-in-Tariff (FIT) program that was launched in late 2009. The rapidly developing PV supply chain may not be taking a sustainable path. The domestic-content requirement is making manufacturers outlay capital to set up manufacturing in Ontario without reliable market data. Only a small number of dealer/installers have any meaningful experience designing and installing grid-tie PV. Until recently, wholesale distributors designed and supplied most grid-tie PV systems in Canada, and solar dealers/installers or electricians or electrical contractors did the installation. Instead of selling directly to dealer/installers, solar manufacturers should develop strong relationships with wholesalers, who have system design experience and product training. This would allow manufacturers to focus on their core strength, reach more customers, and keep lower inventory levels. Wholesale distributors in turn provide dealer/installers with expertise in product and system design, training from a range of manufacturers, marketing and logistics support, and immediate access to inventory. Manufacturers generally lack appropriate accounting, engineering, marketing, and logistics services to deal with a multitude of active accounts, and they are not structured to work with architects and engineers to do complete system design. Partnering with wholesale distributors allows manufacturers to take on the residential and small-scale commercial sectors by building brand awareness and increasing market share and sales across Canada. 2 figs.

  14. Progress & Frontiers in PV Performance

    Energy Technology Data Exchange (ETDEWEB)

    Deline, Chris; DiOrio, Nick; Jordan, Dirk; Toor, Fatima

    2016-09-12

    PowerPoint slides for a presentation given at Solar Power International 2016. Presentation includes System Advisor Model (SAM) introduction and battery modeling, bifacial PV modules and modeling, shade modeling and module level power electronics (MLPE), degradation rates, and PVWatts updates and validation.

  15. The case for better PV forecasting

    DEFF Research Database (Denmark)

    Alet, Pierre-Jean; Efthymiou, Venizelos; Graditi, Giorgio;

    2016-01-01

    Rising levels of PV penetration mean increasingly sophisticated forecasting technologies are needed to maintain grid stability and maximise the economic value of PV systems. The Grid Integration working group of the European Technology and Innovation Platform – Photovoltaics (ETIP PV) shares...... the results of its ongoing research into the advantages and limitations of current forecasting technologies....

  16. Grid Integrated Distributed PV (GridPV) Version 2.

    Energy Technology Data Exchange (ETDEWEB)

    Reno, Matthew J.; Coogan, Kyle

    2014-12-01

    This manual provides the documentation of the MATLAB toolbox of functions for using OpenDSS to simulate the impact of solar energy on the distribution system. The majority of the functio ns are useful for interfacing OpenDSS and MATLAB, and they are of generic use for commanding OpenDSS from MATLAB and retrieving information from simulations. A set of functions is also included for modeling PV plant output and setting up the PV plant in th e OpenDSS simulation. The toolbox contains functions for modeling the OpenDSS distribution feeder on satellite images with GPS coordinates. Finally, example simulations functions are included to show potential uses of the toolbox functions. Each function i n the toolbox is documented with the function use syntax, full description, function input list, function output list, example use, and example output.

  17. Lightweight IMM PV Flexible Blanket Assembly

    Science.gov (United States)

    Spence, Brian

    2015-01-01

    Deployable Space Systems (DSS) has developed an inverted metamorphic multijunction (IMM) photovoltaic (PV) integrated modular blanket assembly (IMBA) that can be rolled or z-folded. This IMM PV IMBA technology enables a revolutionary flexible PV blanket assembly that provides high specific power, exceptional stowed packaging efficiency, and high-voltage operation capability. DSS's technology also accommodates standard third-generation triple junction (ZTJ) PV device technologies to provide significantly improved performance over the current state of the art. This SBIR project demonstrated prototype, flight-like IMM PV IMBA panel assemblies specifically developed, designed, and optimized for NASA's high-voltage solar array missions.

  18. IDENTIFICATION OF ANTAGONISTS OF Xanthomonas campestris ISOLATED FROM RHIZOSPHERE ZONE OF BROCCOLI FARM AT KEMBANG MERTA VILLAGE, TABANAN, BALI

    Directory of Open Access Journals (Sweden)

    Nadya Treesna Wulansari

    2015-03-01

    Full Text Available The main objectives of this research were to isolate and identify antagonists of Xanthomonas campestris from rhizosphere zone of broccoli plants. Soil samples were collected from broccoli farm located at Kembang Merta village, Tabanan, Bali. Isolation and identification of the antagonists were conducted at the Laboratory of Microbiology, Udayana University. Two fungal (Trichoderma harzianum and Trichoderma viride and two bacterial (Bacillus sp. and Pseudomonas sp. antagonists potentially to be developed as biocontrol agents of Xanthomonas campestris were successfully identified in this research

  19. Distribution and harmfulness of field dodder (Cuscuta campestris Yuncker at sugar beet fields in Slovakia

    Directory of Open Access Journals (Sweden)

    Tóth Peter

    2006-01-01

    Full Text Available During 2002-2004, field surveys of field dodder (Cuscuta campestris Yunck e r in croplands were done in southwestern Slovakia. From among 150 localities surveyed, 80 were found infested by the field dodder. Within crop plants, C. campestris infested sugar beet (Beta vulgaris, alfalfa (Medicago sativa tobacco (Nicotiana tabacum, potato (Solanum tuberosum, lentil (Lens esculenta, parsley (Pastinaca sativa and onion (Allium cepa. Besides the crops, 18 weed species were also recorded. The species from the genus Polygonum (Polygonaceae were the most important and acted as a significant reservoir of field dodder in cropland. C. campestris was not found in cold climatic regions with altitude higher than 240 m. The impact of field dodder infestation on sugar beet yield was studied during the year of 2004 in two localities (Šalov and Žitavce in southwestern Slovakia. The presence of field dodder markedly reduced both, quantity and quality of sugar beet yield. Weight of heavily infested beets was reduced from 21.6 to 37.4% and sugar content from 12.0 to 15.2%. Such decline of both parameters was also recorded when field dodder was removed together with leaves of sugar beet during growing season at the end of July. The aim of the infested leaves removal was to decrease mass of field dodder seeds. Although the leaf area of sugar beet regenerates, the decrease of quality and quantity was observed. The decline was the same at both localities, no matter whether the fields were irrigated (Šalov or not (Žitavce.

  20. Interspecific Hybridization of Brassica campestris x B.Oleracea Through Ovary Culture

    Institute of Scientific and Technical Information of China (English)

    ZHANG Guo-qing; SONG Wen-jian; TANG Gui-xiang; ZHOU Wei-jun

    2004-01-01

    Using three varieties of Brassica campestris, Hauarad (708), Maoshan-3 (714) and Youbai (715),as the maternal plants and one variety of Brassica oleracea Jingfeng-1 (6012) as paternal plants, crosses were made to produce interspecific hybrids through ovary culture techniques.The ovaries from the cross between B. campestris × B.oleracea (708 × 6012 and 714 × 6012) were cultured and ovary culture was more effective in terms of obtained seeds when ovaries were cultured in vitro at 9 d after pollination (DAP). While for the cross of 715 × 6012, it was better when ovaries in vitro cultured at 12 DAP. Among three cross combinations, the cross of 714 × 6012 showed the best response and 43 seeds per ovary were obtained. Among the media studied, the ovaries from the cross of 708 × 6012 cultured on MS media supplemented with 3.0 mg L-1 BA × 0.1 mg L-1 NAA showed better response, and its rate of seeds per ovary reached 44.0%.While the ovaries from the other two crosses (714 × 6012 and 715 × 6012) showed the best response when cultured on B5 media supplemented with 3.0 mg L-1 BA + 0.2 mg L-1 NAA, and the rates of seeds per ovary reached 72.0 and 60.0%, respectively. All seeds obtained from the three cross combinations were cultured on the MS media supplemented with 1.0 mg L-1 BA + 0.05 mg L-1 NAA,and the seeds from the cross of 715 × 6012 showed the best germination response and the percentage of germinations reached 66.7%. The regenerated plantlets were obtained from these seedlings after cultured on the MS media supplemented with 0.05 mg L-1 NAA. Cytological study showed that these regenerated plants were all true hybrids of B.campestris × B.oleracea.

  1. Searching for a trace of Artemisia campestris pollen in the air

    Directory of Open Access Journals (Sweden)

    Łukasz Grewling

    2015-12-01

    Full Text Available The aim of the study was to determinate whether Artemisia campestris was present in the vicinity of 8 pollen monitoring stations in Poland by examining temporal variations in daily average airborne Artemisia pollen data recorded by Hirst type volumetric traps. Three day moving averages of airborne Artemisia pollen were examined by Spearman’s rank correlation test. Results show that Artemisia pollen seasons in Poland generally display similar unimodal patterns (correlation coefficients r > 0.900; P < 0.05. The only exception was the Artemisia pollen concentration noted in the outskirts of Poznań (Morasko, where the bimodal pattern was revealed. Correlations between Artemisia pollen data recorded at Poznań-Morasko and the other Polish sites were the lowest in the investigated dataset; this was particularly noticeable in the second part of pollen season (r ~0.730. We show that the typical bimodal pattern in Artemisia pollen seasons, which is characteristic of the presence of both A. vulgaris (first peak and A. campestris (second peak, does not occur at the majority of sites in Poland and is restricted to the outskirts of Poznań. In fact, it was noted that the pollen monitoring site in Poznań-Centre, just 8 km from Morasko, only exhibited one peak (attributed to A. vulgaris. This shows that the influence of A. campestris on airborne pollen season curves is limited and can be largely disregarded. In addition, this study supports previous records showing that the spatial distribution of airborne Artemisia pollen within a city (urban-rural gradient can vary markedly, depending on the species composition.

  2. Irradiation of mushrooms (Agaricus campestris L) to extend their shelf-life

    International Nuclear Information System (INIS)

    Mushrooms (Agaricus campestris L) were irradiated with 1.0; 2.0 and 3.0 kGy, being then stored either at 10 deg C ± 1 deg C or at room temperature (20 deg C ± 2 deg C), with the purpose of determining the most convenient condition to extend their shelf-life. It is concluded that 3.0 kGy and 10 deg C are the most suitable for that, leading to the inhibition of cap opening and stem elongation, less darkening and no evidence of fungal development until 17th day. Subsequentely almost a duplication of their shelf-life was obtained. (Author)

  3. Genetic diversity analysis for agro-morphological and seed quality traits in rapeseed (brassica campestris l.)

    International Nuclear Information System (INIS)

    One hundred fourteen accessions of rapeseed (Brassica campestris L.) were evaluated at National Agricultural Research Centre, Islamabad, Pakistan using cluster and principal component analyses during 2005 and 2006. Cluster analysis based on fifteen agro-morphological and six seed quality traits, divided 114 accessions into six and five clusters during 2005 and 2006, respectively. The first seven and five PCs with eigenvalues > 1 contributed 74.09% and 66.08% of the variability amongst accessions during 2005 and 2006, respectively. Nine important characters contributed positively to first two PCs during both the years 2005 and 2006. (author)

  4. Development of high yielding mutants of Brassica campestris L. cv. Toria selection through gamma rays irradiation

    International Nuclear Information System (INIS)

    Homogeneous seeds of Brassica campestris L. cv. Toria selection were treated with different doses of gamma rays (750, 1000 and 1250 Gy) to induce genetic variability for the selection of new genotypes with improved agronomic traits. After passing through different stages of selection, two promising mutants were selected for further studies. Two selected mutants along with 5 other entries including parent variety were evaluated for yield and yield components in yield trials for two consecutive years. The mutant TS96-752 was significantly (P less than or equal to 0.05) superior to all other entries in grain yield but at par with FSD 86028-3

  5. Production of High-Viscosity Whey Broths by a Lactose-Utilizing Xanthomonas campestris Strain

    OpenAIRE

    Schwartz, Robert D.; Bodie, Elizabeth A.

    1985-01-01

    Xanthomonas campestris BB-1L was isolated by enrichment and selection by serial passage in a lactose-minimal medium. When BB-1L was subsequently grown in medium containing only 4% whey and 0.05% yeast extract, the lactose was consumed and broth viscosities greater than 500 cps at a 12 s−1 shear rate were produced. Prolonged maintenance in whey resulted in the loss of the ability of BB-1L to produce viscous broths in whey, indicating a reversion to preferential growth on whey protein, like the...

  6. Inheritance of oilseed rape (Brassica napus) RAPD markers in a backcross progeny with Brassica campestris

    DEFF Research Database (Denmark)

    Mikkelsen, T.R.; Jensen, J.; Bagger Jørgensen, Rikke

    1996-01-01

    Different cultivars/transgenic lines of oilseed rape (Brassica napus) were crossed (as females) with different cultivars/populations of Brassica campestris. All cross combinations produced seed, with an average seed set per pollination of 9.8. Backcrossing of selected interspecific hybrids (as...... markers could be assigned to six linkage groups, most probably reflecting six B. napus C-chromosomes. The presence of backcross plants with recombinant genotypes suggests that complex genetic processes can take place during the interspecific hybridisation and backcrossing in these Brassica species. The...

  7. Kinetic models for xanthan gum production using Xanthomonas campestris from molasses

    OpenAIRE

    S.L. GILANI; Najafpour, G.D.; H.D. HEYDARZADEH; H Zare

    2011-01-01

    The effects of media temperature, agitation rate and molasses concentration on the yield of fermentation in xanthan gum production process were investigated. Xanthan gum was produced in batch fermentation by Xanthomonas campestris PTCC 1473 from molasses. At 32 C, 500 rpm and media with 30 g/l of total sugar, maximum production of xanthan gum (17.1 g/l) was achieved. For the purity of the xanthan FTIR spectrum was obtained. The identified spectrum was compared with the commercial product. In...

  8. Location and cloning of the ketal pyruvate transferase gene of Xanthomonas campestris.

    OpenAIRE

    Marzocca, M P; Harding, N E; Petroni, E A; Cleary, J M; Ielpi, L

    1991-01-01

    Genes required for xanthan polysaccharide synthesis (xps) are clustered in a DNA region of 13.5 kb in the chromosome of Xanthomonas campestris. Plasmid pCHC3 containing a 12.4-kb insert of xps genes has been suggested to include a gene involved in the pyruvylation of xanthan gum (N.E. Harding, J.M. Cleary, D.K. Cabañas, I. G. Rosen, and K. S. Kang, J. Bacteriol. 169:2854-2861, 1987). An essential step toward understanding the biosynthesis of xanthan gum and to enable genetic manipulation of x...

  9. NCBI nr-aa BLAST: CBRC-DNOV-01-0760 [SEVENS

    Lifescience Database Archive (English)

    Full Text Available CBRC-DNOV-01-0760 ref|NP_636242.1| extracellular protease [Xanthomonas campestris pv. campest...ris str. ATCC 33913] ref|YP_244443.1| extracellular protease [Xanthomonas campestris pv. campestri...s str. 8004] sp|P23314|EXPR_XANCP Extracellular protease precursor emb|CAA35962.1| protease [Xanthomonas campest...ris] gb|AAM40166.1| extracellular protease [Xanthomonas campestris pv. campest...ris str. ATCC 33913] gb|AAY50423.1| extracellular protease [Xanthomonas campestris pv. campestris str. 8004] NP_636242.1 5.2 27% ...

  10. NCBI nr-aa BLAST: CBRC-DNOV-01-2319 [SEVENS

    Lifescience Database Archive (English)

    Full Text Available CBRC-DNOV-01-2319 ref|NP_636242.1| extracellular protease [Xanthomonas campestris pv. campest...ris str. ATCC 33913] ref|YP_244443.1| extracellular protease [Xanthomonas campestris pv. campestri...s str. 8004] sp|P23314|EXPR_XANCP Extracellular protease precursor emb|CAA35962.1| protease [Xanthomonas campest...ris] gb|AAM40166.1| extracellular protease [Xanthomonas campestris pv. campest...ris str. ATCC 33913] gb|AAY50423.1| extracellular protease [Xanthomonas campestris pv. campestris str. 8004] NP_636242.1 1.4 30% ...

  11. NCBI nr-aa BLAST: CBRC-DNOV-01-3199 [SEVENS

    Lifescience Database Archive (English)

    Full Text Available CBRC-DNOV-01-3199 ref|NP_636242.1| extracellular protease [Xanthomonas campestris pv. campest...ris str. ATCC 33913] ref|YP_244443.1| extracellular protease [Xanthomonas campestris pv. campestri...s str. 8004] sp|P23314|EXPR_XANCP Extracellular protease precursor emb|CAA35962.1| protease [Xanthomonas campest...ris] gb|AAM40166.1| extracellular protease [Xanthomonas campestris pv. campest...ris str. ATCC 33913] gb|AAY50423.1| extracellular protease [Xanthomonas campestris pv. campestris str. 8004] NP_636242.1 0.27 27% ...

  12. NCBI nr-aa BLAST: CBRC-DNOV-01-1204 [SEVENS

    Lifescience Database Archive (English)

    Full Text Available CBRC-DNOV-01-1204 ref|NP_636242.1| extracellular protease [Xanthomonas campestris pv. campest...ris str. ATCC 33913] ref|YP_244443.1| extracellular protease [Xanthomonas campestris pv. campestri...s str. 8004] sp|P23314|EXPR_XANCP Extracellular protease precursor emb|CAA35962.1| protease [Xanthomonas campest...ris] gb|AAM40166.1| extracellular protease [Xanthomonas campestris pv. campest...ris str. ATCC 33913] gb|AAY50423.1| extracellular protease [Xanthomonas campestris pv. campestris str. 8004] NP_636242.1 8.9 27% ...

  13. NCBI nr-aa BLAST: CBRC-DNOV-01-2628 [SEVENS

    Lifescience Database Archive (English)

    Full Text Available CBRC-DNOV-01-2628 ref|NP_636242.1| extracellular protease [Xanthomonas campestris pv. campest...ris str. ATCC 33913] ref|YP_244443.1| extracellular protease [Xanthomonas campestris pv. campestri...s str. 8004] sp|P23314|EXPR_XANCP Extracellular protease precursor emb|CAA35962.1| protease [Xanthomonas campest...ris] gb|AAM40166.1| extracellular protease [Xanthomonas campestris pv. campest...ris str. ATCC 33913] gb|AAY50423.1| extracellular protease [Xanthomonas campestris pv. campestris str. 8004] NP_636242.1 4.0 28% ...

  14. NCBI nr-aa BLAST: CBRC-DNOV-01-0949 [SEVENS

    Lifescience Database Archive (English)

    Full Text Available CBRC-DNOV-01-0949 ref|NP_636242.1| extracellular protease [Xanthomonas campestris pv. campest...ris str. ATCC 33913] ref|YP_244443.1| extracellular protease [Xanthomonas campestris pv. campestri...s str. 8004] sp|P23314|EXPR_XANCP Extracellular protease precursor emb|CAA35962.1| protease [Xanthomonas campest...ris] gb|AAM40166.1| extracellular protease [Xanthomonas campestris pv. campest...ris str. ATCC 33913] gb|AAY50423.1| extracellular protease [Xanthomonas campestris pv. campestris str. 8004] NP_636242.1 3.1 29% ...

  15. NCBI nr-aa BLAST: CBRC-DNOV-01-0571 [SEVENS

    Lifescience Database Archive (English)

    Full Text Available CBRC-DNOV-01-0571 ref|NP_636242.1| extracellular protease [Xanthomonas campestris pv. campest...ris str. ATCC 33913] ref|YP_244443.1| extracellular protease [Xanthomonas campestris pv. campestri...s str. 8004] sp|P23314|EXPR_XANCP Extracellular protease precursor emb|CAA35962.1| protease [Xanthomonas campest...ris] gb|AAM40166.1| extracellular protease [Xanthomonas campestris pv. campest...ris str. ATCC 33913] gb|AAY50423.1| extracellular protease [Xanthomonas campestris pv. campestris str. 8004] NP_636242.1 6.8 27% ...

  16. The Xanthomonas campestris type III effector XopJ targets the host cell proteasome to suppress salicylic-acid mediated plant defence.

    Directory of Open Access Journals (Sweden)

    Suayib Üstün

    Full Text Available The phytopathogenic bacterium Xanthomonas campestris pv. vesicatoria (Xcv requires type III effector proteins (T3Es for virulence. After translocation into the host cell, T3Es are thought to interact with components of host immunity to suppress defence responses. XopJ is a T3E protein from Xcv that interferes with plant immune responses; however, its host cellular target is unknown. Here we show that XopJ interacts with the proteasomal subunit RPT6 in yeast and in planta to inhibit proteasome activity. A C235A mutation within the catalytic triad of XopJ as well as a G2A exchange within the N-terminal myristoylation motif abolishes the ability of XopJ to inhibit the proteasome. Xcv ΔxopJ mutants are impaired in growth and display accelerated symptom development including tissue necrosis on susceptible pepper leaves. Application of the proteasome inhibitor MG132 restored the ability of the Xcv ΔxopJ to attenuate the development of leaf necrosis. The XopJ dependent delay of tissue degeneration correlates with reduced levels of salicylic acid (SA and changes in defence- and senescence-associated gene expression. Necrosis upon infection with Xcv ΔxopJ was greatly reduced in pepper plants with reduced expression of NPR1, a central regulator of SA responses, demonstrating the involvement of SA-signalling in the development of XopJ dependent phenotypes. Our results suggest that XopJ-mediated inhibition of the proteasome interferes with SA-dependent defence response to attenuate onset of necrosis and to alter host transcription. A central role of the proteasome in plant defence is discussed.

  17. Pyranose Dehydrogenase from Agaricus campestris and Agaricus xanthoderma: Characterization and Applications in Carbohydrate Conversions

    Directory of Open Access Journals (Sweden)

    Clemens K. Peterbauer

    2013-08-01

    Full Text Available Pyranose dehydrogenase (PDH is a flavin-dependent sugar oxidoreductase that is limited to a rather small group of litter-degrading basidiomycetes. The enzyme is unable to utilize oxygen as an electron acceptor, using substituted benzoquinones and (organo metal ions instead. PDH displays a broad substrate specificity and intriguing variations in regioselectivity, depending on substrate, enzyme source and reaction conditions. In contrast to the related enzyme pyranose 2-oxidase (POx, PDHs from several sources are capable of oxidizing α- or β-1→4-linked di- and oligosaccharides, including lactose. PDH from A. xanthoderma is able to perform C-1 and C-2 oxidation, producing, in addition to lactobionic acid, 2-dehydrolactose, an intermediate for the production of lactulose, whereas PDH from A. campestris oxidizes lactose nearly exclusively at the C-1 position. In this work, we present the isolation of PDH-encoding genes from A. campestris (Ac and A. xanthoderma (Ax and a comparison of other so far isolated PDH-sequences. Secretory overexpression of both enzymes in Pichia pastoris was successful when using their native signal sequences with yields of 371 U·L−1 for AxPDH and 35 U·L−1 for AcPDH. The pure enzymes were characterized biochemically and tested for applications in carbohydrate conversion reactions of industrial relevance.

  18. PECTATE LYASE-LIKE10 is associated with pollen wall development in Brassica campestris

    Institute of Scientific and Technical Information of China (English)

    Jingjing Jiang; Lina Yao; Youjian Yu; Meiling Lv; Ying Miao; Jiashu Cao

    2014-01-01

    PECTATE LYASE‐LIKE10 (PLL10) was previously identified as one of the differentially expressed genes both in microspores during the late pollen developmental stages and in pistils during the fertilization process in Chinese cabbage (Brassica campestris ssp. chinensis). Here, antisense‐RNA was used to study the functions of BcPLL10 in Chinese cabbage. Abnormal pollen was identified in the transgenic lines (bcpll10‐4,‐5, and‐6). In fertilization experiments, fewer seeds were harvested when the antisense‐RNA lines were used as pollen donor. In vivo and in vitro pollen germination assays less germinated pollen tubes were observed in bcpll10 lines. Scanning electron microscopy observation verified that the tryphine materials were over accumulated around the pollen surface and sticked them together in bcpll10. Moreover, transmission electron microscopy observation revealed that the internal endintine was overdeveloped and predominantly occupied the intine, and disturbed the normal proportional distribution of the two layers in the non‐germinal furrow region; and no obvious demarcation existed between them in the germinal furrow region in the bcpll10 pollen. Collectively, this study presented a novel PLL gene that played an important role during the pollen wall development in B. campestris, which may also possess potential importance for male sterility usage in agriculture.

  19. Production of xanthan gum by free and immobilized cells of Xanthomonas campestris and Xanthomonas pelargonii.

    Science.gov (United States)

    Niknezhad, Seyyed Vahid; Asadollahi, Mohammad Ali; Zamani, Akram; Biria, Davoud

    2016-01-01

    Production of xanthan gum using immobilized cells of Xanthomonas campestris and Xanthomonas pelargonii grown on glucose or hydrolyzed starch as carbon sources was investigated. Calcium alginate (CA) and calcium alginate-polyvinyl alcohol-boric acid (CA-PVA) beads were used for the immobilization of cells. Xanthan titers of 8.2 and 9.2g/L were obtained for X. campestris cells immobilized in CA-PVA beads using glucose and hydrolyzed starch, respectively, whereas those for X. pelargonii were 8 and 7.9 g/L, respectively. Immobilized cells in CA-PVA beads were successfully employed in three consecutive cycles for xanthan production without any noticeable degradation of the beads whereas the CA beads were broken after the first cycle. The results of this study suggested that immobilized cells are advantageous over the free cells for xanthan production. Also it was shown that the cells immobilized in CA-PVA beads are more efficient than cells immobilized in CA beads for xanthan production. PMID:26526173

  20. PV output smoothing with energy storage.

    Energy Technology Data Exchange (ETDEWEB)

    Ellis, Abraham; Schoenwald, David Alan

    2012-03-01

    This report describes an algorithm, implemented in Matlab/Simulink, designed to reduce the variability of photovoltaic (PV) power output by using a battery. The purpose of the battery is to add power to the PV output (or subtract) to smooth out the high frequency components of the PV power that that occur during periods with transient cloud shadows on the PV array. The control system is challenged with the task of reducing short-term PV output variability while avoiding overworking the battery both in terms of capacity and ramp capability. The algorithm proposed by Sandia is purposely very simple to facilitate implementation in a real-time controller. The control structure has two additional inputs to which the battery can respond. For example, the battery could respond to PV variability, load variability or area control error (ACE) or a combination of the three.

  1. Acute and sub-acute toxicity studies of aqueous and methanol extracts of Nelsonia campestris in rats

    Institute of Scientific and Technical Information of China (English)

    Janet Mobolaji Olaniyan; Hadiza Lami Muhammad; Hussaini Anthony Makun; Musa Bola Busari; Abubakar Siddique Abdullah

    2016-01-01

    Objective: To evaluate the acute and sub-acute toxicity of aqueous and methanol ex-tracts of Nelsonia campestris (N. campestris) in rats. Methods: Acute oral toxicity study of aqueous and methanol extracts was carried out by administration of 10, 100, 1 000, 1 600, 2 900 and 5 000 mg/kg body weight of N. campestris extracts to rats in the respective groups. Sub-acute toxicity study was conducted by oral administration of the extracts at daily doses of 100, 300 and 600 mg/kg body weight to another group of rats for 28 days, while rats in the control group received 0.5 mL of normal saline. Results: The LD50 of the N. campestris extracts in rats was determined to be greater than 5 000 mg/kg body weight. There was no significant difference (P>0.05) between the test groups administered with aqueous and methanol extracts in relation to the control group for serum electrolytes (Na+, K+, Cl−, HCO3−), serum albumin, total and conjugated bili-rubin. Similarly, mean organ-to-body weight ratio and all haematological parameters (white blood cell, red blood cell, mean cell volume, mean corpuscular haemoglobin, mean corpuscular haemoglobin concentration, packed cell volume) evaluated were not significantly different (P > 0.05) from the control. There was a significant increase (P Conclusions: Intake of high doses of this plant extracts may exhibit mild organ toxicity.

  2. Variation suggestive of horizontal gene transfer at a lipopolysaccharide (lps biosynthetic locus in Xanthomonas oryzae pv. oryzae, the bacterial leaf blight pathogen of rice

    Directory of Open Access Journals (Sweden)

    Sonti Ramesh V

    2004-10-01

    Full Text Available Abstract Background In animal pathogenic bacteria, horizontal gene transfer events (HGT have been frequently observed in genomic regions that encode functions involved in biosynthesis of the outer membrane located lipopolysaccharide (LPS. As a result, different strains of the same pathogen can have substantially different lps biosynthetic gene clusters. Since LPS is highly antigenic, the variation at lps loci is attributed to be of advantage in evading the host immune system. Although LPS has been suggested as a potentiator of plant defense responses, interstrain variation at lps biosynthetic gene clusters has not been reported for any plant pathogenic bacterium. Results We report here the complete sequence of a 12.2 kb virulence locus of Xanthomonas oryzae pv. oryzae (Xoo encoding six genes whose products are homologous to functions involved in LPS biosynthesis and transport. All six open reading frames (ORFs have atypical G+C content and altered codon usage, which are the hallmarks of genomic islands that are acquired by horizontal gene transfer. The lps locus is flanked by highly conserved genes, metB and etfA, respectively encoding cystathionine gamma lyase and electron transport flavoprotein. Interestingly, two different sets of lps genes are present at this locus in the plant pathogens, Xanthomonas campestris pv. campestris (Xcc and Xanthomonas axonopodis pv. citri (Xac. The genomic island is present in a number of Xoo strains from India and other Asian countries but is not present in two strains, one from India (BXO8 and another from Nepal (Nepal624 as well as the closely related rice pathogen, Xanthomonas oryzae pv. oryzicola (Xoor. TAIL-PCR analysis indicates that sequences related to Xac are present at the lps locus in both BXO8 and Nepal624. The Xoor strain has a hybrid lps gene cluster, with sequences at the metB and etfA ends, being most closely related to sequences from Xac and the tomato pathogen, Pseudomonas syringae pv. tomato

  3. Adiabatic Rearrangement of Hollow PV Towers

    Directory of Open Access Journals (Sweden)

    Eric A Hendricks

    2010-10-01

    Full Text Available Diabatic heating from deep moist convection in the hurricane eyewall produces a towering annular structure of elevated potential vorticity (PV. This structure has been referred to as a hollow PV tower. The sign reversal of the radial gradient of PV satisfies the Charney-Stern necessary condition for combined barotropic-baroclinic instability. For thin enough annular structures, small perturbations grow exponentially, extract energy from the mean flow, and lead to hollow tower breakdown, with significant vortex structural and intensity change. The three-dimensional adiabatic rearrangements of two prototypical hurricane-like hollow PV towers (one thick and one thin are examined in an idealized framework. For both hollow towers, dynamic instability causes air parcels with high PV to be mixed into the eye preferentially at lower levels, where unstable PV wave growth rates are the largest. Little or no mixing is found to occur at upper levels. The mixing at lower and middle levels is most rapid for the breakdown of the thin hollow tower, consistent with previous barotropic results. For both hollow towers, this advective rearrangement of PV affects the tropical cyclone structure and intensity in a number of ways. First, the minimum central pressure and maximum azimuthal mean velocity simultaneously decrease, consistent with previous barotropic results. Secondly, isosurfaces of absolute angular momentum preferentially shift inward at low levels, implying an adiabatic mechanism by which hurricane eyewall tilt can form. Thirdly, a PV bridge, similar to that previously found in full-physics hurricane simulations, develops as a result of mixing at the isentropic levels where unstable PV waves grow most rapidly. Finally, the balanced mass field resulting from the PV rearrangement is warmer in the eye between 900 and 700 hPa. The location of this warming is consistent with observed warm anomalies in the eye, indicating that in certain instances the hurricane

  4. Multifunctionality of PV shells; Multifunktionalitaet von PV-Fassaden

    Energy Technology Data Exchange (ETDEWEB)

    Erban, C. [Saint-Gobain Glass Solar, Aachen (Germany)

    2000-08-01

    Integrated PV systems have come a long way since the construciton of the first solar building shell eight years ago. All technical problems have be solved, and a multitude of solar wall elements are now available that enable architects and planners to design their own customised solar building. [German] Der Einsatz von gebaeudeintegrierter Photovoltaik hat in den nunmehr acht Jahren seit dem Bau der ersten Solarfassade erhebliche Fortschritte gemacht. In technischer Hinsicht ist heute nahezu alles moeglich. Der Umsetzung der einstigen Vision 'Jedem Gebaeude seine Solaranlage' steht heute nichts mehr entgegen, zumal zahlreiche Foerdermoeglichkeiten existieren. Die Vielzahl der Einsatz- und Kombinationsmoeglichkeiten von Solar-Fassadenelementen versetzen Planer und Architekten in die Lage, ihrer individuellen Idee einer gebaeudeintegrierten Solaranlage Gestalt zu geben. (orig.)

  5. PV panel model based on datasheet values

    DEFF Research Database (Denmark)

    Sera, Dezso; Teodorescu, Remus; Rodriguez, Pedro

    2007-01-01

    This work presents the construction of a model for a PV panel using the single-diode five-parameters model, based exclusively on data-sheet parameters. The model takes into account the series and parallel (shunt) resistance of the panel. The equivalent circuit and the basic equations of the PV cell...

  6. Distributed PV Adoption - Sensitivity to Market Factors

    Energy Technology Data Exchange (ETDEWEB)

    Gagnon, Pieter; Sigrin, Ben

    2016-02-01

    NREL staff used the dSolar (distributed solar) model to forecast the adoption of distributed, behind-the-meter PV through the year 2050 for 9 different scenarios. The scenarios varied in their assumptions about a carbon tax, the cost of PV systems in the future, and what credit would be given for excess generation once current net metering policies expire.

  7. Global PV markets and perspectives

    Energy Technology Data Exchange (ETDEWEB)

    Wolfsegger, Cristoph [European Photolvoltaic Industry Association (EPIA), Brussels, Belgium (Belgium)

    2007-06-15

    This presentation mainly talks about the global importance of the PV industry, not only in the environmental sphere but also in the economic sphere. It is firstly given the major information of the European Photovoltaic Industry Association (EPIA), where there can be found the lists of those full member countries that work as: components manufacturers, consulting, and associate members. Then, it is given a briefly explanation about the Alliance for Rural Electrification (ARE), and the reasons why the -PV systems- are almost the panacea to both the energy and the environmental issue. In addition, it is given the most relevant information about how to implement this system in those regions that have not yet implemented it. Besides, there are explained some of the benefits that this system has. It is shortly explained how this system is working in German and it is also shown a comparison chart about the photovoltaic feed-in tariffs. There are shown some graphics and charts having information related to the global markets and the global installations of PV systems and other issues related to them. [Spanish] Esta presentacion habla principalmente acerca de la importancia que hoy en dia tiene la industria fotovoltaica alrededor del mundo, esto no solo ocurre en el ambito ambiental sino tambien en el economico. En la primer parte se muestra la informacion mas importante acerca de la Asociacion Europea de la Industria Fotovoltaica (EPIA por sus siglas en ingles), en donde se encuentran las listas de los paises que son miembros permanentes trabajando como: fabricantes de componentes, asesores y miembros asociados. Enseguida, se da, de manera escueta, una explicacion acerca de la ARE, asi como las razones por las que los sistemas fotovoltaicos son casi la panacea tanto para los problemas ambientales como para los energeticos. Ademas, se explica la informacion mas relevante acerca de como implementar este sistema en aquellas partes del mundo que todavia no lo han realizado

  8. Optimal design of PV and HP system

    DEFF Research Database (Denmark)

    Nepper-Rasmussen, Bjarke Christian; Rasmussen, Theis Bo

    2015-01-01

    Methods of utilizing residential produced photovoltaic (PV) power by converting to thermal energy through heat pumps (HP) are present in literature, where thermal energy is dispersed as either heat or hot water at the instant moment of PV production. In this paper an alternative solution is descr......Methods of utilizing residential produced photovoltaic (PV) power by converting to thermal energy through heat pumps (HP) are present in literature, where thermal energy is dispersed as either heat or hot water at the instant moment of PV production. In this paper an alternative solution...... that the thermal storage with a BT is a better investment than a PV system without HP or no investment. Furthermore, it showed that the optimization model developed in this project is capable of finding the optimal combination of component sizes based on our data....

  9. Genetic linkage map of Brassica campestris L.using AFLP and RAPD markers

    Institute of Scientific and Technical Information of China (English)

    卢钢; 陈杭; 等

    2002-01-01

    A genetic linkage map comprised of 131 loci was constructed with an F2 population derived from an inter-subspecific cross between Brassica campestris L.ssp.chinensis cv.aijiaohang” and ssp.rapifera cv.,”'isihai”.The genetic map included 93 RAPD loci,36 AFLP loci and 2 morphological loci organized into 10 main linkage groups(LGs) and 2 small groups,covering 1810.9cM with average distance between adjacent markers being approximately 13.8cM.The map is suitable for identification of molecular markers linked to important agronomic traits.QTL analysis,and even for marker-assisted selection in breeding programs of Chinese cabbage and turnip.

  10. Soxhlet-assisted matrix solid phase dispersion to extract flavonoids from rape (Brassica campestris) bee pollen.

    Science.gov (United States)

    Ma, Shuangqin; Tu, Xijuan; Dong, Jiangtao; Long, Peng; Yang, Wenchao; Miao, Xiaoqing; Chen, Wenbin; Wu, Zhenhong

    2015-11-15

    Soxhlet-assisted matrix solid phase dispersion (SA-MSPD) method was developed to extract flavonoids from rape (Brassica campestris) bee pollen. Extraction parameters including the extraction solvent, the extraction time, and the solid support conditions were investigated and optimized. The best extraction yields were obtained using ethanol as the extraction solvent, silica gel as the solid support with 1:2 samples to solid support ratio, and the extraction time of one hour. Comparing with the conventional solvent extraction and Soxhlet method, our results show that SA-MSPD method is a more effective technique with clean-up ability. In the test of six different samples of rape bee pollen, the extracted content of flavonoids was close to 10mg/g. The present work provided a simple and effective method for extracting flavonoids from rape bee pollen, and it could be applied in the studies of other kinds of bee pollen. PMID:26454344

  11. Soxhlet-assisted matrix solid phase dispersion to extract flavonoids from rape (Brassica campestris) bee pollen.

    Science.gov (United States)

    Ma, Shuangqin; Tu, Xijuan; Dong, Jiangtao; Long, Peng; Yang, Wenchao; Miao, Xiaoqing; Chen, Wenbin; Wu, Zhenhong

    2015-11-15

    Soxhlet-assisted matrix solid phase dispersion (SA-MSPD) method was developed to extract flavonoids from rape (Brassica campestris) bee pollen. Extraction parameters including the extraction solvent, the extraction time, and the solid support conditions were investigated and optimized. The best extraction yields were obtained using ethanol as the extraction solvent, silica gel as the solid support with 1:2 samples to solid support ratio, and the extraction time of one hour. Comparing with the conventional solvent extraction and Soxhlet method, our results show that SA-MSPD method is a more effective technique with clean-up ability. In the test of six different samples of rape bee pollen, the extracted content of flavonoids was close to 10mg/g. The present work provided a simple and effective method for extracting flavonoids from rape bee pollen, and it could be applied in the studies of other kinds of bee pollen.

  12. Morphological characterization of local landraces of rapeseed (Brassica campestris L. var toria of Nepal

    Directory of Open Access Journals (Sweden)

    Salik Ram Gupta

    2015-12-01

    Full Text Available Rapeseed (Brassica campestris L. var toria is the main source of edible oil for Nepalese people. 54 rapeseed lines were collected from different hilly district of Nepal ranging from 987 m to 2550 m altitude. These lines were planted in augmented design for its traits characterization in Khumaltar 2013. Different traits of local rapeseed were characterized, and evaluated. NGRC 02778 performed better followed by SR-02 than local checks Morang-2, Chitwan Local and Unnati in terms of yield, days to maturity and pest infestation. Similarly, genotype SR-18 was late and SR-16 was earlier in terms of days to maturity. In conclusion, SR-02 was found better genotype based on different characteristics measured among all local rapeseeds planted in Khumaltar 2013. Thus SR-2 can be used as parents in crossing material for further breeding purposes and it can also be tested in further trial.

  13. Optimization of medium composition for the production of compounds effective against Xanthomonas campestris by bacillus subtilis

    Directory of Open Access Journals (Sweden)

    Rončević Zorana Z.

    2014-01-01

    Full Text Available The biocontrol agents are a very promising alternative to synthetic pesticides that are presently used to control plant diseases caused by phytopathogenic microorganisms. Members of the Bacillus genera are soil bacteria that produce significant quantities of agriculturally important bioactive compounds. Production of these compounds can be improved by changing the nutritional and environmental conditions. The aim of this study was the optimization of medium composition, using response surface methodology, for the production of compounds effective against Xanthomonas campestris ATCC 13951 by Bacillus subtilis ATCC 6633. To study the production of antimicrobial compounds by selected Bacillus strain, the producing microorganisms were cultivated on nutrient broth. The inhibition zone diameter of 18.0 mm obtained by the diffusion-disc method indicated that the used Bacillus subtilis strain produces compounds with antimicrobial activity against Xanthomonas campestris ATCC 13951. To optimize the composition of the cultivation medium in terms of glycerol, sodium nitrite and phosphates content, experiments were carried out in accordance with Box-Behnken design, and optimization of multiple responses was performed using the concept of desirability function. The developed model predicted that the maximum inhibition zone diameter (26.23 mm against tested phytopathogen is achieved when the initial content of glycerol, sodium nitrite and phosphate were 50.00 g/L, 2.85 g/L and 11.00 g/L, respectively. To minimize the consumption of medium components and costs of effluents processing, additional optimization set was made. The techno-economic analysis of the obtained results has to be done to select optimal medium composition for industrial production of antimicrobial compounds.

  14. Multifunctional a-Si PV systems

    Energy Technology Data Exchange (ETDEWEB)

    Peippo, K.; Lund, P.; Vartiainen, E. [Helsinki Univ. of Technology, Otaniemi (Finland). Advanced Energy Systems

    1998-10-01

    The optimal use of the various forms of solar energy (passive, active, daylighting, photovoltaics) in buildings calls for an optimal integration of the technologies. As energy conservation potential in space heating may soon be exhausted, electricity efficiency and on-site generation will play an increasing role in energy-conscious building design. There, dispersed PV systems integrated into buildings show a significant market potential, due to a number of benefits: no extra land area is required, PV-array may replace conventional cladding materials and become a building element. Moreover, the produced PV-electricity is more valuable for the building owner than for an electric utility

  15. The Effect of Field Dodder (Cuscuta campestris Yunck. on Morphological and Fluorescence Parameters of Giant Ragweed (Ambrosia trifida L.

    Directory of Open Access Journals (Sweden)

    Sava Vrbničanin

    2013-01-01

    Full Text Available The effect of the parasitic flowering plant known as field dodder (Cuscuta campestrisYunck. on morphological and fluorescence parameters of infested giant ragweed(Ambrosia trifida L. plants was examined under controlled conditions. The parameters ofchlorophyll fluorescence (Fo, Fv/Fm, ΦPSII, Fv, Fm, ETR and IF were measured on infested (Iand non-infested (N A. trifida plants over a period of seven days, beginning with the day ofinfestation. Morphological parameters (plant height, dry and fresh weight were measuredon the last day of fluorescence measurements. C. campestris was found to affect the height,fresh and dry weight of the infested A. trifida plants, causing significant reduction in plantheight and dry weight. Field dodder also affected several parameters of chlorophyll fluorescence(Fo, Fv/Fm, ΦPSII and Fv in infested A. trifida plants.

  16. Overcoming interspecific incompatibility in the cross Brassica campestris ssp. japonica x Brassica oleracea var. botrytis using irradiated mentor pollen page

    International Nuclear Information System (INIS)

    The cross B. campestris ssp. japonica x B. oleracea var. botrytis fails due to incompatibility barrier at the stigma. To realize this cross, irradiated compatible pollen (mentor pollen) was used before the incompatible pollination. The presence of mentor pollen stimulated the incompatible pollen to germinate and effect fertilization and seed set. One hybrid was thus obtained. Most of the seeds were inviable. Of the 5 plants raised one was a hybrid and 4 resembled the female parent. 1 tab., 7 refs

  17. Evaluation of In Vitro Anticancer Activity of Ocimum Basilicum, Alhagi Maurorum, Calendula Officinalis and Their Parasite Cuscuta Campestris

    OpenAIRE

    Mandana Behbahani

    2014-01-01

    The present investigation was carried out to study the relationship between presence of cytotoxic compounds in Ocimum basilicum, Alhagi maurorum, Calendula officinalis and their parasite Cuscuta campestris. The cytotoxic activity of the pure compounds was performed by MTT assay against breast cancer cell lines (MCF-7 and MDA-MB-231) and normal breast cell line (MCF 10A). The induction of apoptosis was measured by the expression levels of p53, bcl-2, bax and caspase-3 genes using quantitative ...

  18. Enhancing effect of 4-hydroxy-3-nitrophenylacetic acid on transcription of the ice nucleation-active gene of Xanthomonas campestris.

    Science.gov (United States)

    Watanabe, M; Watanabe, J; Michigami, Y

    1994-12-01

    Cultivation of an ice nucleation-active strain of Xanthomonas campestris in the presence (1 ppm) of 4-hydroxy-3-nitrophenylacetic acid resulted in enhancement of its ice-nucleation activity. Both the ice-nucleation-active protein, InaX, and its mRNA were effectively expressed in the bacterial cells cultured in the presence of this compound. This indicates that this compound stimulated the biosynthesis of the ice-nucleation-active protein. PMID:7765721

  19. Decreased Pollen Viability and Thicken Pollen Intine in Antisense Silenced Brassica campestris Mutant of BcMF19

    Institute of Scientific and Technical Information of China (English)

    LIU Jin-long; GAO Ming-hui; LIU Ying; CAO Jia-shu

    2014-01-01

    Brassica campestris male fertility 19 (BcMF19;GenBank accession number GQ902048.1), a gene that is specially expressed in tapetum cells and microspores during anther development in B. campestris ssp. chinensis, which is learned from the previous in situ hybridization study. In the present study, we constructed antisense-silenced plants of BcMF19 using B. campestris ssp. chinensis to validate this prediction. The morphology of the pistils, long anthers, and short anthers was signiifcantly affected in 35sbcmf19 compared with the control samples. 4´-6-Diamidino-2-phenylindole staining revealed that two generative nuclei and one large vegetative nucleus were not affected in the mutant compared with control. Statistical analysis of Alexander’s staining results showed that 96% of the control pollen grains had vitality, whereas only 86% of the mutant pollen grains did. Under scanning electron microscopy, the mutant demonstrated numerous abnormal pollen grains and resembled dried persimmon. The frequency of normal pollen grains was approximately 18%. Under transmission electron microscopy, the pollen intine during the binucleate and mature pollen stages in 35sbcmf19 exhibited abnormal thickening, especially at the germinal furrows, compared with control. In vitro pollen germination test showed that the tips of the mutant pollen tubes transformed into globular alveoli and stopped growing compared with control. On the other hand, in vivo pollen germination test suggested that BcMF19 affected the pollen tube extension in the pistil. These ifndings indicate that BcMF19 is essential to the pollen development and pollen tube extension of B. campestris ssp. chinensis.

  20. PV-hybrid and mini-grid

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    Within the 5th European PV-hybrid and mini-grid conference 29th and 30th April, 2010 in Tarragona (Spain) the following lectures were held: (1) Overview of IEA PVPS Task 11 PV-hybrid systems within mini grids; (2) Photovoltaic revolution for deployment in developing countries; (3) Legal and financial conditions for the sustainable operation of mini-grids; (4) EU instruments to promote renewable energies in developing countries; (5) PV hybridization of diesel electricity generators: Conditions of profitability and examples in differential power and storage size ranges; (6) Education suit of designing PV hybrid systems; (7) Sustainable renewable energy projects for intelligent rural electrification in Laos, Cambodia and Vietnam; (8) Techno-economic feasibility of energy supply of remote villages in Palestine by PV systems, diesel generators and electric grid (Case studies: Emnazeil and Atouf villages); (9) Technical, economical and sustainability considerations of a solar PV mini grid as a tool for rural electrification in Uganda; (10) Can we rate inverters for rural electrification on the basis of energy efficiency?; (11) Test procedures for MPPT charge controllers characterization; (12) Energy storage for mini-grid stabilization; (13) Redox flow batteries - Already an alternative storage solution for hybrid PV mini-grids?; (14) Control methods for PV hybrid mini-grids; (15) Partial AC-coupling in mini-grids; (15) Normative issues of small wind turbines in PV hybrid systems; (16) Communication solutions for PV hybrid systems; (17) Towards flexible control and communication of mini-grids; (18) PV/methanol fuel cell hybrid system for powering a highway security variable message board; (19) Polygeneration smartgrids: A solution for the supply of electricity, potable water and hydrogen as fuel for transportation in remote Areas; (20) Implementation of the Bronsbergen micro grid using FACDS; (21) A revisited approach for the design of PV wind hybrid systems; (22

  1. PV: Bonus--Developing a U.S. market of PV in buildings

    International Nuclear Information System (INIS)

    The use of photovoltaic (PV) systems in and on buildings is seen as a key market for the PV industry. The buildings market is challenging, but it provides a large potential for increased US production of ''high-value'' PV technology that will benefit electric utilities and building owners. To assist the PV industry in developing products for this market, the US Department of Energy began a new initiative called ''Building Opportunities in the US for Photovoltaics'' (PV:BONUS). The responses cover nearly all of the PV-buildings product options envisioned, with multiple responses on topics such as architectural glazings and roofing systems. The paper describes the types of products that will be pursued by the teams selected. Additional supporting activities are described that will further encourage the development of a sustainable infrastructure

  2. Cadmium-Induced Hydrogen Accumulation Is Involved in Cadmium Tolerance in Brassica campestris by Reestablishment of Reduced Glutathione Homeostasis.

    Directory of Open Access Journals (Sweden)

    Qi Wu

    Full Text Available Hydrogen gas (H2 was recently proposed as a therapeutic antioxidant and signaling molecule in clinical trials. However, the underlying physiological roles of H2 in plants remain unclear. In the present study, hydrogen-rich water (HRW was used to characterize the physiological roles of H2 in enhancing the tolerance of Brassica campestris against cadmium (Cd. The results showed that both 50 μM CdCl2 and 50%-saturated HRW induced an increase of endogenous H2 in Brassica campestris seedlings, and HRW alleviated Cd toxicity related to growth inhibition and oxidative damage. Seedlings supplied with HRW exhibited increased root length and reduced lipid peroxidation, similar to plants receiving GSH post-treatment. Additionally, seedlings post-treated with HRW accumulated higher levels of reduced glutathione (GSH and ascorbic acid (AsA and showed increased GST and GPX activities in roots. Molecular evidence illustrated that the expression of genes such as GS, GR1 and GR2, which were down-regulated following the addition of Cd, GSH or BSO, could be reversed to varying degrees by the addition of HRW. Based on these results, it could be proposed that H2 might be an important regulator for enhancing the tolerance of Brassica campestris seedlings against Cd, mainly by governing reduced glutathione homeostasis.

  3. INFLUENCE OF EPIDEMIOLOGICAL FACTORS ON THE BIOHERBICIDAL EFFICACY OF A Xanthomonas campestris ISOLATE ON COMMON COCKLEBUR ( Xanthium strumarium

    Directory of Open Access Journals (Sweden)

    C. Douglas Boyette

    2013-07-01

    Full Text Available Greenhouse and controlled-environment studies were conducted to determine the effects of incubation temperature, dew period temperature, dew period duration, plant growth stage, and cell concentration on the bioherbicidal efficacy of a highly virulent isolate (LVA987 of the bacterial pathogen,Xanthomonas campestris, against Xanthium strumarium (common cocklebur. X. campestris infected cocklebur at 20, 25, 30, and 35ºC but the disease achieved at 20ºC was not sufficient to cause high plant mortality. Plant mortality was also significantly lower in plants that were exposed to < 12 h of dew, or at dew temperatures of 15 or 35 ºC. Plants at the 0-4 leaf stage were controlled more efficaciously than older plants and increasing cell concentration from 10^5 to 10^9 cells ml^-1 resulted in higher mortality and biomass reduction levels. Results indicate that X. campestris can infect and kill cocklebur over a wide range of temperature, dew period, and inoculum levels and, therefore has potential as a bioherbicidal agent against common cocklebur.

  4. Transformerless PV inverters. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Borup, U.

    2009-12-15

    Since the start of the project the market for grid connected PV inverters have developed further. When the project started three - phase inverter were only available in high power systems. The technology developed within this project will enable three phase technology also to be implemented in string inverters for system down to 10 kW. We expect this to be very attractive due to the increased demand for symmetrical feed-in to the grid. The project relevance is therefore high and the sector continues to develop very much driven by technology. Especially the inverter technology is getting a lot of focus. The inverter systems are expected to take a much larger role in supporting the electrical grid in the future. The technology platform developed within the project is prepared to be extended with these utility functionalities. The main results of the project were: 1) A new technology concept for transformer-less inverters has been demonstrated with a number of prototypes. 2) Efficiency above 97,7% has been proven. 3) Efficiency and Maximum power point tracking has been optimized to ensure that almost all energy produced of the panels is transferred to the grid. 4) The platform is developed with a very fast control board, which enables extended functionality as demanding grid supporting functions in the future. Details about cost price and details about the control loop implementation is excluded from the report due to the competitive situation for Danfoss Solar Inverters A/S. (LN)

  5. PV Module Reliability Research (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2013-06-01

    This National Center for Photovoltaics sheet describes the capabilities of its PV module reliability research. The scope and core competencies and capabilities are discussed and recent publications are listed.

  6. Distributed PV Adoption in Maine Through 2021

    Energy Technology Data Exchange (ETDEWEB)

    Gagnon, Pieter; Sigrin, Ben

    2015-11-06

    NREL has used its dSolar (distributed solar) model to generate low-medium-high estimates of distributed PV adoption in Maine through 2021. This presentation gives a high-level overview of the model and modeling results.

  7. Leakage current measurement in transformerless PV inverters

    DEFF Research Database (Denmark)

    Kerekes, Tamas; Sera, Dezso; Mathe, Laszlo

    2012-01-01

    Photovoltaic (PV) installations have seen a huge increase during the last couple of years. Transformerless PV inverters are gaining more share of the total inverter market, due to their high conversion efficiency, small weight and size. Nevertheless safety should have an important role in case...... of these tranformerless systems, due to the missing galvanic isolation. Leakage and fault current measurement is a key issue for these inverter topologies to be able to comply with the required safety standards. This article presents the test results of two different current measurement sensors that were suggested...... to be used in commercial PV inverters for the measurement of leakage and fault ground currents. The German VDE0126–1–1 standard gives the limit for fault and leakage ground currents and all grid connected PV inverters have to comply with these limits and disconnect from the grid in case of a fault....

  8. Determination of methodology to obtain resistance to citrus canker (Xanthomonas campestris pv. citri) through nuclear techniques combined with in vitro culture

    International Nuclear Information System (INIS)

    One of the serious problems of sweet orange cultivation in Brazil is the occurrence of citrus canker. As a result, it is most important to obtain cultivars that are tolerant or resistant to this bacterial disease. Many citrus cultivars are potentially polyembryonic: a nucellar tissue can produce several embryos genetically identical to the mother plant. Considering that these embryos are of unicellular origin, the application of mutagenic agents to nucellar tissues is an interesting method for obtaining non-chimeric mutants. On the other hand, in vitro techniques have become an important tool in mutation breeding, since the nucellus can be totipotent even after mutagen treatment, and these techniques permit the screening of mutants for disease tolerance or resistance at earlier, even in vitro, stages of growth. Nucellar tissues of young fruits of the cultivar Valencia (Citrus sinensis Osb.) were extracted from ovules 12 weeks after pollination and put on basic medium, consisting of macro- and micronutrients of Murashige and Skoog medium combined with (in mg/L) meso-inositol (100); pyridoxine HCl (1); nicotinic acid (1); thiamine (0.2); saccharose (50 g/L); malt extract (500); bacto-agar (8 g/L). The nucellar tissues were gamma irradiated at various doses to determine their radiosensitivity on inoculation one week, two weeks and three weeks after inoculation. The percentage of nucellar cultures producing embryoids was inversely proportional to the radiation dose. There was no significant difference between the control (60%) and 0.5 kR (55%). The dose of 12 kR was practically lethal. The average number of embryoids per nucellar culture, at doses of 0.5, 1.0 and 2.0 kR, was significantly reduced, as compared with the control (6.4), yielding the almost similar values of 3.4, 3.0 and 4.5, respectively. (author)

  9. The potential of solar PV in Ontario

    International Nuclear Information System (INIS)

    Canada has lagged behind other industrialized nations in the growth of solar energy markets. Currently, over 78 per cent of the global market for solar energy is for grid-connected applications where power is fed into the electrical distribution network. Less than 3.5 per cent of the Canadian solar market is grid-connected. This report investigated the potential size of the photovoltaic (PV) market in Ontario given adequate support from both governments and utilities. The forecast was based on sustainable growth levels that the solar industry as a whole might maintain over an extended period of time. It was suggested that it is technically feasible to install over 3000 MW of PV in single, detached homes in the province, which could generate over 3200 GWh each year. If the right policy conditions were put in place, the technical potential for PV on all buildings in Ontario is over 14,000 MW by 2025, which would generate over 13,000 GWh annually. Support mechanisms such as the Advanced Renewable Tariff (ART) or Standard Offer Contracts (SOC) will enable the PV industry to build capacity. Future markets for PV include new homes, commercial buildings and the existing housing stock. With a properly designed system, it is forecasted that the deployment of PV by 2025 could result in the involvement of 400,000 homes with over 1200 MW of installed capacity and over 290 MW installed annually by 2025. Recommendations to Ontario Power Authority's (OPA) report supply mix report focused on the use of SOCs as the appropriate support mechanism to start building solar capacity in Ontario, as projections using SOCs would see Ontario following the growth patterns of other nations. It was concluded that the OPA report does not acknowledge the current growth rates of PV globally, nor does it fully consider the potential of PV in Ontario. 9 refs., 8 figs

  10. PV array simulator development and validation

    International Nuclear Information System (INIS)

    The ability to harvest all available energy from a photovoltaic (PV) array is essential if new system developments are to meet levelized cost of energy targets and achieve grid parity with conventional centralized utility power. Therefore, exercising maximum power point tracking (MPPT) algorithms, dynamic irradiance condition operation and startup and shutdown routines and evaluating inverter performance with various PV module fill-factor characteristics must be performed with a repeatable, reliable PV source. Sandia National Laboratories is collaborating with Ametek Programmable Power to develop and demonstrate a multi-port TerraSAS PV array simulator. The simulator will replicate challenging PV module profiles, enabling the evaluation of inverter performance through analyses of the parameters listed above. Energy harvest algorithms have traditionally implemented methods that successfully utilize available energy. However, the quantification of energy capture has always been difficult to conduct, specifically when characterizing the inverter performance under non-reproducible dynamic irradiance conditions. Theoretical models of the MPPT algorithms can simulate capture effectiveness, but full validation requires a DC source with representative field effects. The DC source being developed by Ametek and validated by Sandia is a fully integrated system that can simulate an IV curve from the Solar Advisor Model (SAM) module data base. The PV simulator allows the user to change the fill factor by programming the maximum power point voltage and current parameters and the open circuit voltage and short circuit current. The integrated PV simulator can incorporate captured irradiance and module temperature data files for playback, and scripted profiles can be generated to validate new emerging hardware embedded with existing and evolving MPPT algorithms. Since the simulator has multiple independent outputs, it also has the flexibility to evaluate an inverter with multiple

  11. Optimization of PV-based energy production by dynamic PV-panel/inverter configuration

    DEFF Research Database (Denmark)

    Paasch, Kasper; Nymand, Morten; Haase, Frerk

    This paper investigates the possible increase in annual energy production of a PV system with more than one MPPT (maximum power point tracker) input channels under Nordic illumination conditions, in case a concept of dynamic switching of the PV panels is used at the inputs of the inverters....

  12. PV/T slates - Laboratory measurements; PV/T-Schiefer. Labormessungen

    Energy Technology Data Exchange (ETDEWEB)

    Kropf, S.

    2003-07-01

    This comprehensive, illustrated report for the Swiss Federal Office of Energy (SFOE) is one a series of five reports dealing with increasing the overall efficiency of photovoltaic (PV) installations by also using the heat collected by the dark-coloured PV panels. The work reported on addresses open questions on the use of the heat and its optimal use. This report deals with an experimental outdoor set-up and reviews in-situ measurements made on a prototype of a ventilated PV-tile system (PV/T-Slates). The report describes the configuration and construction of the experimental PV-tiled roof and the measurement system used to measure its electrical and thermal performance. The results of the measurements made are presented in detail in graphical form. The influence of various factors such as air-slit width and mounting angle are discussed.

  13. Photosynthetic carbon fixation characteristics of fruiting structures of Brassica campestris L

    International Nuclear Information System (INIS)

    Activities of key enzymes of the Calvin cycle and C4 metabolism, rates of CO2 fixation, and the initial products of photosynthetic 14CO2 fixation were determined in the podwall, seed coat (fruiting structures), and the subtending leaf (leaf below a receme) of Brassica campestris L. cv Toria. Compared to activities of ribulose-1,5-bisphosphate carboxylase and other Calvin cycle enzymes, e.g. NADP-glyceraldehyde-3-phosphate-dehydrogenase and ribulose-5-phosphate kinase, the activities of phosphoenol pyruvate carboxylase and other enzymes of C4 metabolism, viz. NADP-malate dehydrogenase, NADP-malic enzyme, glutamate pyruvate transaminase, and glutamate oxaloacetate transaminase, were generally much higher in seed than in podwall and leaf. Podwall and leaf were comparable to each other. Pulse-chase experiments showed that in seed the major product of 14CO2 assimilation was malate (in short time), whereas in podwall and leaf, the label initially appeared in 3-PGA. With time, the label moved to sucrose. In contrast to legumes, Brassica pods were able to fix net CO2 during light. However, respiratory losses were very high during the dark period

  14. Bioconversion from crude glycerin by Xanthomonas campestris 2103: xanthan production and characterization

    Directory of Open Access Journals (Sweden)

    L. V. Brandão

    2013-12-01

    Full Text Available The production and rheological properties of xanthan gum from crude glycerin fermentation, a primary by-product of the biodiesel industry with environmental and health risks, were evaluated. Batch fermentations (28 °C/250 rpm /120 h were carried out using crude glycerin, 0.01% urea and 0.1% KH2PO4, (% w/v, and compared to a sucrose control under the same operational conditions, using Xanthomonas campestris strain 2103 isolate from Brazil. Its maximal production by crude glycerin fermentation was 7.23±0.1 g·L-1 at 120 h, with an apparent viscosity of 642.57 mPa·s, (2 % w/v, 25 °C, 25 s-1, 70% and 30% higher than from sucrose fermentation, respectively. Its molecular weight varied from 28.2 to 36.2×10(6 Da. The Ostwald-de-Waele model parameters (K and n indicated a pseudoplastic behavior at all concentrations (0.5 to 2.0 %, w/v and temperatures (25-85 °C, while its consistency index indicated promising rheological properties for drilling fluid applications. Therefore, crude glycerin has potential as a cost-effective and alternative substrate for non-food grade xanthan production.

  15. Changes in Protein, Nonnutritional Factors, and Antioxidant Capacity during Germination of L. campestris Seeds

    Directory of Open Access Journals (Sweden)

    C. Jiménez Martínez

    2012-01-01

    Full Text Available The changes in SDS-PAGE proteins patterns, oligosaccharides and phenolic compounds of L. campestris seeds, were evaluated during nine germination days. SDS-PAGE pattern showed 12 bands in the original protein seeds, while in the samples after 1–9 germination days, the proteins located in the range of 28–49 and 49–80 kDa indicated an important reduction, and there was an increase in bands about 27 kDa. On the other hand, oligosaccharides showed more than 50% of decrease in its total concentration after 4 germination days; nevertheless after the fifth day, the oligosaccharides concentration increases and rises more than 30% of the original concentration. Phenolic compounds increased their concentration since the first germination day reaching until 450% more than the original seed level. The obtained results are related with liberation or increase of phenolic compounds with antioxidant properties, allowing us to suggest that the germination would be used to produce legume foods for human consumption with better nutraceutical properties.

  16. PV performance modeling workshop summary report.

    Energy Technology Data Exchange (ETDEWEB)

    Stein, Joshua S.; Tasca, Coryne Adelle (SRA International, Inc., Fairfax, VA); Cameron, Christopher P.

    2011-05-01

    During the development of a solar photovoltaic (PV) energy project, predicting expected energy production from a system is a key part of understanding system value. System energy production is a function of the system design and location, the mounting configuration, the power conversion system, and the module technology, as well as the solar resource. Even if all other variables are held constant, annual energy yield (kWh/kWp) will vary among module technologies because of differences in response to low-light levels and temperature. A number of PV system performance models have been developed and are in use, but little has been published on validation of these models or the accuracy and uncertainty of their output. With support from the U.S. Department of Energy's Solar Energy Technologies Program, Sandia National Laboratories organized a PV Performance Modeling Workshop in Albuquerque, New Mexico, September 22-23, 2010. The workshop was intended to address the current state of PV system models, develop a path forward for establishing best practices on PV system performance modeling, and set the stage for standardization of testing and validation procedures for models and input parameters. This report summarizes discussions and presentations from the workshop, as well as examines opportunities for collaborative efforts to develop objective comparisons between models and across sites and applications.

  17. POWERED LED LIGHTING SUPPLIED FROM PV CELLS

    Directory of Open Access Journals (Sweden)

    Tirshu M.

    2011-12-01

    Full Text Available The paper deals with practical realization of efficient lighting system based on LED’s of 80W total power mounted on corridor ceiling total length of which is 120m and substitutes existing traditional lighting system consisting of 29 lighting blocks with 4 fluorescent lamps each of them and summary power 2088W. Realized lighting system is supplied from two photovoltaic panels of power 170W. Generated energy by PV cells is accumulated in two accumulators of 75Ah capacity and from battery by means of specialized convertor is applied to lighting system. Additionally, paper present data measured by digital weather station (solar radiation and UV index, which is mounted near of PV cells and comparative analyze of solar energy with real energy generated by PV cells is done. Measured parameters by digital weather station are stored by computer in on-line mode.

  18. Terawatt Challenge for Thin-Film PV

    Energy Technology Data Exchange (ETDEWEB)

    Zweibel, K.

    2005-08-01

    The evolution of PV into one of the world's largest industries is not going to happen without major unforeseen problems. However, this study attempts to address the obvious ones, so that we can put aside the mythology of PV (for example, that it is only ''boutique power'' or that one must pave the world with it to be useful) and get on with changing the world's energy infrastructure. With the years of rapid market growth now under way in PV, the author is sure this will not be the last effort to understand the real potential and pitfalls of meeting the Challenge.

  19. Real time PV manufacturing diagnostic system

    Energy Technology Data Exchange (ETDEWEB)

    Kochergin, Vladimir [MicroXact Inc., Blacksburg, VA (United States); Crawford, Michael A. [MicroXact Inc., Blacksburg, VA (United States)

    2015-09-01

    The main obstacle Photovoltaic (PV) industry is facing at present is the higher cost of PV energy compared to that of fossil energy. While solar cell efficiencies continue to make incremental gains these improvements are so far insufficient to drive PV costs down to match that of fossil energy. Improved in-line diagnostics however, has the potential to significantly increase the productivity and reduce cost by improving the yield of the process. On this Phase I/Phase II SBIR project MicroXact developed and demonstrated at CIGS pilot manufacturing line a high-throughput in-line PV manufacturing diagnostic system, which was verified to provide fast and accurate data on the spatial uniformity of thickness, an composition of the thin films comprising the solar cell as the solar cell is processed reel-to-reel. In Phase II project MicroXact developed a stand-alone system prototype and demonstrated the following technical characteristics: 1) ability of real time defect/composition inconsistency detection over 60cm wide web at web speeds up to 3m/minute; 2) Better than 1mm spatial resolution on 60cm wide web; 3) an average better than 20nm spectral resolution resulting in more than sufficient sensitivity to composition imperfections (copper-rich and copper-poor regions were detected). The system was verified to be high vacuum compatible. Phase II results completely validated both technical and economic feasibility of the proposed concept. MicroXact’s solution is an enabling technique for in-line PV manufacturing diagnostics to increase the productivity of PV manufacturing lines and reduce the cost of solar energy, thus reducing the US dependency on foreign oil while simultaneously reducing emission of greenhouse gasses.

  20. Seasonal energy storage - PV-hydrogen systems

    Energy Technology Data Exchange (ETDEWEB)

    Leppaenen, J. [Neste Oy/NAPS (Finland)

    1998-10-01

    PV systems are widely used in remote areas e.g. in telecommunication systems. Typically lead acid batteries are used as energy storage. In northern locations seasonal storage is needed, which however is too expensive and difficult to realise with batteries. Therefore, a PV- battery system with a diesel backup is sometimes used. The disadvantages of this kind of system for very remote applications are the need of maintenance and the need to supply the fuel. To overcome these problems, it has been suggested to use hydrogen technologies to make a closed loop autonomous energy storage system

  1. Large-Scale PV Integration Study

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Shuai; Etingov, Pavel V.; Diao, Ruisheng; Ma, Jian; Samaan, Nader A.; Makarov, Yuri V.; Guo, Xinxin; Hafen, Ryan P.; Jin, Chunlian; Kirkham, Harold; Shlatz, Eugene; Frantzis, Lisa; McClive, Timothy; Karlson, Gregory; Acharya, Dhruv; Ellis, Abraham; Stein, Joshua; Hansen, Clifford; Chadliev, Vladimir; Smart, Michael; Salgo, Richard; Sorensen, Rahn; Allen, Barbara; Idelchik, Boris

    2011-07-29

    This research effort evaluates the impact of large-scale photovoltaic (PV) and distributed generation (DG) output on NV Energy’s electric grid system in southern Nevada. It analyzes the ability of NV Energy’s generation to accommodate increasing amounts of utility-scale PV and DG, and the resulting cost of integrating variable renewable resources. The study was jointly funded by the United States Department of Energy and NV Energy, and conducted by a project team comprised of industry experts and research scientists from Navigant Consulting Inc., Sandia National Laboratories, Pacific Northwest National Laboratory and NV Energy.

  2. International PV QA Task Force's Proposed Comparative Rating System for PV Modules: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Wohlgemuth, J.; Kurtz, S.

    2014-10-01

    The International PV Quality Assurance Task Force is developing a rating system that provides comparative information about the relative durability of PV modules. Development of accelerated stress tests that can provide such comparative information is seen as a major step toward being able to predict PV module service life. This paper will provide details of the ongoing effort to determine the format of such an overall module rating system. The latest proposal is based on using three distinct climate zones as defined in IEC 60721-2-1 for two different mounting systems. Specific stresses beyond those used in the qualification tests are being developed for each of the selected climate zones.

  3. International PV QA Task Force's proposed comparative rating system for PV modules

    Science.gov (United States)

    Wohlgemuth, John; Kurtz, Sarah

    2014-10-01

    The International PV Quality Assurance Task Force is developing a rating system that provides comparative information about the relative durability of PV modules. Development of accelerated stress tests that can provide such comparative information is seen as a major step toward being able to predict PV module service life. This paper will provide details of the ongoing effort to determine the format of such an overall module rating system. The latest proposal is based on using three distinct climate zones as defined in IEC 60721-2-1 for two different mounting systems. Specific stresses beyond those used in the qualification tests are being developed for each of the selected climate zones.

  4. Salacia campestris root bark extract: peroxidase inhibition, antioxidant and antiradical profile

    Directory of Open Access Journals (Sweden)

    José Carlos Rebuglio Vellosa

    2009-03-01

    Full Text Available Reactive oxygen species (ROS and free radical species have been implicated in initiating or accompanying many diseases in living organisms; there is thus, a continual need for antioxidants molecules to inactivate ROS/free radicals. Many studies of plants crude extracts have demonstrated free-radical scavenging and antioxidant action. Salacia species have long been used, in several countries, as traditional medicines against certain diseases and for their anti-inflammatory properties. In this study, Salacia campestris Walp (Hippocrateaceae root bark ethanol extract (ScEtOH was assessed for its ability to scavenge free radicals and reactive oxygen species; the results were expressed as percentage inhibition of the active species. ScEtOH was efficient against studied species: DPPH radical (obtained inhibition = 30%, ABTS•+ (IC50 = 1.8±0.8 μg/mL, HOCl (IC50 = 1.7 ± 0.1 μg/mL, O2•- (obtained inhibition = 32%, and NO• (obtained inhibition = 18 %. Peroxidase activity inhibition was evaluated through the guaiacol oxidation reaction catalyzed by hemin, HRP and myeloperoxidase (MPO; data showed that ScEtOH at 10 μg/mL led to 54 and 51% of inhibition, respectively, for the hemin and HRP systems. In the MPO system, ScEtOH promoted a 50% inhibition at 8.9 μg/mL, whereas quercetin, a powerful MPO inhibitor, inhibited this system at 1.35 μg/mL.Espécies reativas do oxigênio (ERO e radicais livres estão relacionados ao início ou à exacerbação de muitas doenças em organismos vivos; existindo portanto uma necessidade contínua por moléculas antioxidantes que inativem as ERO e radicais livres. Muitos estudos com extratos brutos de plantas têm demonstrado propriedades antioxidantes e seqüestradoras de radicais livres. Espécies de Salacia são utilizadas, em muitos países, como remédio tradicional contra certas doenças e por suas propriedades antiinflamatórias. Neste estudo, o extrato bruto etanólico da casca da raiz da Salacia

  5. NREL PV System Performance and Standards Technical Progress

    Energy Technology Data Exchange (ETDEWEB)

    Osterwald, C. R.

    2005-01-01

    This paper presents a brief overview of the status and accomplishments during Fiscal Year (FY)2004 of the Photovoltaic (PV) System Performance & Standards Subtask, which is part of PV Systems Engineering Project (a joint NREL-Sandia project).

  6. Impact of Rooftop Solar PV on Residential Distribution Network

    DEFF Research Database (Denmark)

    Bhattarai, Bishnu Prasad; Bak-Jensen, Birgitte; Pillai, Jayakrishnan Radhakrishna;

    Increased environmental awareness in recent years has encouraged rapid growth of renewable energy sources especially solar PV and wind. Among them, small scale solar PV has been gaining more momentum especially at residential level. Even today moderate penetration of grid tied rooftop solar PV has...... to foresee the potential issues of high PV penetration and to facilitate effective solutions for grid reinforcement and grid management. Unlike many research focusing on impact analysis with PV at utility or commercial scale, this research make comprehensive analysis with a detailed modeling of a residential...... LV feeder provided with small scale rooftop PV. Voltage deviation index (VDI) and power loss index (PLI) has been used to quantify the impacts of PV. Furthermore, overvoltage has been taken as an operational constraint to determine maximum penetration level of PV. The analysis has been performed...

  7. Invisible photovoltaics - PV basics + 25 design examples

    NARCIS (Netherlands)

    Meekma, L.T.; Valdes Cano, N.A.; Zhindon Andrade, P.

    2015-01-01

    This "designers' manual" is made during the TIDO-course AR0531 Innovation and Sustainability This manual is intended for architects and designers. Its main objective is to address PV technology as a building material alternative for the architect to incorporate in his design repertoire.

  8. MPPT algorithm for voltage controlled PV inverters

    DEFF Research Database (Denmark)

    Kerekes, Tamas; Teodorescu, Remus; Liserre, Marco;

    2008-01-01

    This paper presents a novel concept for an MPPT that can be used in case of a voltage controlled grid connected PV inverters. In case of single-phase systems, the 100 Hz ripple in the AC power is also present on the DC side. Depending on the DC link capacitor, this power fluctuation can be used...

  9. TRNSYS HYBRID wind diesel PV simulator

    Energy Technology Data Exchange (ETDEWEB)

    Quinlan, P.J.A.; Mitchell, J.W.; Klein, S.A.; Beckman, W.A.; Blair, N.J. [Univ. of Wisconsin, Madison, WI (United States)

    1996-12-31

    The Solar Energy Laboratory (SEL) has developed a wind diesel PV hybrid systems simulator, UW-HYBRID 1.0, an application of the TRNSYS 14.2 time-series simulation environment. An AC/DC bus links up to five diesels and wind turbine models, along with PV modules, a battery bank, and an AC/DC converter. Multiple units can be selected. PV system simulations include solar angle and peak power tracking options. Weather data are Typical Meteorological Year data, parametrically generated synthesized data, or external data files. PV performance simulations rely on long-standing SEL-developed algorithms. Loads data are read as scalable time series. Diesel simulations include estimated fuel-use and waste heat output, and are dispatched using a least-cost of fuel strategy. Wind system simulations include varying air density, wind shear and wake effects. Time step duration is user-selectable. UW-HYBRID 1.0 runs in Windows{reg_sign}, with TRNSED providing a customizable user interface. 12 refs., 6 figs.

  10. PV-mooduli toodang suurfarmis / Teolan Tomson

    Index Scriptorium Estoniae

    Tomson, Teolan, 1932-

    2015-01-01

    Artiklis uuritakse PV-paneelide tootlikkuse langust nende vastastikuse varjutamise tõttu. Näidatakse, et Eesti oludes on soovitav kasutada paneelide madalaid kaldenurki ja suhtelist reavahet, mis ületab paneeli kõrguse pooleteistkordset väärtust

  11. Characterization of Xanthomonas axonopodis pv. phaseoli isolates

    NARCIS (Netherlands)

    Nunes, W.M.C.; Corazza, M.J.; De Souza, S.A.C.D.; Tsai, S.M.; Kuramae, E.E.

    2008-01-01

    A simple, quick and easy protocol was standardized for extraction of total DNA of the bacteria Xanthomonas axonopodis pv. phaseoli. The DNA obtained by this method had high quality and the quantity was enough for the Random Amplified Polymorphic DNA (RAPD) reactions with random primers, and Polymera

  12. Final Technical Report: PV Fault Detection Tool.

    Energy Technology Data Exchange (ETDEWEB)

    King, Bruce Hardison [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jones, Christian Birk [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-12-01

    The PV Fault Detection Tool project plans to demonstrate that the FDT can (a) detect catastrophic and degradation faults and (b) identify the type of fault. This will be accomplished by collecting fault signatures using different instruments and integrating this information to establish a logical controller for detecting, diagnosing and classifying each fault.

  13. A Practical Optimization Method for Designing Large PV Plants

    DEFF Research Database (Denmark)

    Kerekes, Tamas; Koutroulis, E.; Eyigun, S.;

    2011-01-01

    Nowadays Photovoltaic (PV) plants have multi MW sizes, the biggest plants reaching tens of MW of capacity. Such large-scale PV plants are made up of several thousands of PV panels, each panel being in the range of 150-350W. This means that the design of a Large PV power plant is a big challenge a......, that optimizes the structure of the plant based on predefined targets, such as the minimum Levelized Cost Of Energy....

  14. Análisis comparativo de los caracteres epidérmicos en Flourensia campestris y F. oolepis (Asteraceae Comparative analysis of the epidermal characters in Flourensia campestris and F. oolepis (Asteraceae

    Directory of Open Access Journals (Sweden)

    Natalia Delbón

    Full Text Available En el presente estudio se examinaron y compararon cuantitativamente las epidermis foliares de Flourensia campestris Griseb. y F. oolepis S. F. Blake, especies endémicas que crecen en las sierras de Córdoba, Argentina. Para ello, se seleccionaron cinco variables: número de células epidérmicas propiamente dichas, estomas, tricomas glandulares y eglandulares e índice estomático. Los resultados obtenidos se evaluaron por métodos estadísticos; ellos indican que hay diferencias significativas entre ambas especies en las variables frecuencia de estomas, de células propiamente dichas, de tricomas glandulares e índice estomático. Estos datos podrían ser de interés para su reconocimiento cuando se dispone de muestras pequeñas o fragmentos.This study provides comparative analyses of foliar epidermis in Flourensia campestris Griseb. and F. oolepis S. F. Blake, endemic species that grow in Córdoba, Argentina. Five variables were selected: number of epidermal cells, stomata, glandular and eglandular trichomes and stomatal index. Results were evaluated by statistical methods; they show that there are significant differences between the variables of both species; these data could be of interest for their identification, when only are available small samples and fragments.

  15. Commercialization of PV-powered pumping systems for use in utility PV service programs. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The project described in this report was a commercialization effort focused on cost-effective remote water pumping systems for use in utility-based photovoltaic (PV) service programs. The project combined a commercialization strategy tailored specifically for electric utilities with the development of a PV-powered pumping system that operates conventional ac pumps rather than relying on the more expensive and less reliable PV pumps on the market. By combining these two attributes, a project goal was established of creating sustained utility purchases of 250 PV-powered water pumping systems per year. The results of each of these tasks are presented in two parts contained in this Final Summary Report. The first part summarizes the results of the Photovoltaic Services Network (PSN) as a new business venture, while the second part summarizes the results of the Golden Photon system installations. Specifically, results and photographs from each of the system installations are presented in this latter part.

  16. Impedance characterization of PV modules in outdoor conditions

    DEFF Research Database (Denmark)

    Oprea, Matei-lon; Thorsteinsson, Sune; Spataru, Sergiu;

    2016-01-01

    Impedance spectroscopy (IS) has been used for laboratory characterizations of photovoltaic (PV) technologies under well controlled conditions. This work applies IS for outdoor characterization of PV panels, in order to observe the effect of irradiance (G) and temperature (T) on the PV module...

  17. Determination of Parameters of PV Concentrating System With Heliostat

    Science.gov (United States)

    Vardanyan, R.; Norsoyan, A.; Dallakyan, V.

    2010-10-01

    The structure of PV concentrating system with heliostat is analyzed. The mathematical model of system consisting of PV concentrating module and heliostat is developed. With the use of developed mathematical model the optimal parameters of the system are determined. The results of this work can be used during the design of PV concentrating systems with heliostats.

  18. High Resolution PV Power Modeling for Distribution Circuit Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Norris, B. L.; Dise, J. H.

    2013-09-01

    NREL has contracted with Clean Power Research to provide 1-minute simulation datasets of PV systems located at three high penetration distribution feeders in the service territory of Southern California Edison (SCE): Porterville, Palmdale, and Fontana, California. The resulting PV simulations will be used to separately model the electrical circuits to determine the impacts of PV on circuit operations.

  19. Beacons In Brief. P/PV In Brief. Issue 2

    Science.gov (United States)

    Blank, Susan; Farley, Chelsea

    2004-01-01

    This second issue in P/PV's "In Brief" series focuses on the San Francisco Beacon Initiative and P/PV's recently released evaluation results. The Beacon Initiative established after-school programs in eight public schools in low-income San Francisco neighborhoods. P/PV's 36-month evaluation examined key developmental and academic outcomes.…

  20. PV Obelisk - Information system with photovoltaics; PV-Obelisk Orientierungssystem mit Photovoltaik

    Energy Technology Data Exchange (ETDEWEB)

    Ruoss, D.; Rasmussen, J.

    2004-07-01

    This final report for the Swiss Federal Office of Energy (SFOE) describes the development of an information system powered by a photovoltaic (PV) array. As an innovative approach, the 'PV-Obelisk' project is the combination of PV with a multi-functional pillar made of natural stone in an aesthetic way. The PV modules serve both as a power supply and as a design element. Two initial prototypes led the way to a third, optimised consumer configuration that was planned to guarantee maximum user frequency. Test operation in front of the 'Heidiland' motor way restaurant confirmed the market analyses made and delivered the expected results. The product, whose three LCD displays are updated via a mobile telephony-based text-message system, proved its technical reliability and showed a high user frequency. Because of the high overall energy consumption, PV power can only partially contribute to the energy supply needed. Various compromises in the technical and aesthetic areas are discussed that were made for the sake of product acceptance in the market. The range of application areas for such a 'PV Obelisk' are discussed and the need for early co-ordination with urban planners is stressed.

  1. Evaluation of in vitro anticancer activity of Ocimum basilicum, Alhagi maurorum, Calendula officinalis and their parasite Cuscuta campestris.

    Science.gov (United States)

    Behbahani, Mandana

    2014-01-01

    The present investigation was carried out to study the relationship between presence of cytotoxic compounds in Ocimum basilicum, Alhagi maurorum, Calendula officinalis and their parasite Cuscuta campestris. The cytotoxic activity of the pure compounds was performed by MTT assay against breast cancer cell lines (MCF-7 and MDA-MB-231) and normal breast cell line (MCF 10A). The induction of apoptosis was measured by the expression levels of p53, bcl-2, bax and caspase-3 genes using quantitative Real Time PCR. Three active fractions were detected by nuclear magnetic resonance as lutein, lupeol and eugenol, respectively, in C. officinalis, A. maurorum and O. basilicum. These compounds and their epoxidized forms were also detected in their parasite C. campestris. The cytotoxic activity of lutein epoxide, lupeol epoxide and eugenol epoxide was significantly more than lutein, lupeol and eugenol. The mRNA expression level of p53, caspase-3 and bax genes were increased in both cancer cells treated with all pure compounds. However, bcl-2 gene expression decreased in treated breast cancer cells. In conclusion, all the data indicated that the epoxide forms of lupeol, lutein and eugenol are potential drug candidates for inducing apoptosis in human breast cancer cells. PMID:25548920

  2. Evaluation of in vitro anticancer activity of Ocimum basilicum, Alhagi maurorum, Calendula officinalis and their parasite Cuscuta campestris.

    Directory of Open Access Journals (Sweden)

    Mandana Behbahani

    Full Text Available The present investigation was carried out to study the relationship between presence of cytotoxic compounds in Ocimum basilicum, Alhagi maurorum, Calendula officinalis and their parasite Cuscuta campestris. The cytotoxic activity of the pure compounds was performed by MTT assay against breast cancer cell lines (MCF-7 and MDA-MB-231 and normal breast cell line (MCF 10A. The induction of apoptosis was measured by the expression levels of p53, bcl-2, bax and caspase-3 genes using quantitative Real Time PCR. Three active fractions were detected by nuclear magnetic resonance as lutein, lupeol and eugenol, respectively, in C. officinalis, A. maurorum and O. basilicum. These compounds and their epoxidized forms were also detected in their parasite C. campestris. The cytotoxic activity of lutein epoxide, lupeol epoxide and eugenol epoxide was significantly more than lutein, lupeol and eugenol. The mRNA expression level of p53, caspase-3 and bax genes were increased in both cancer cells treated with all pure compounds. However, bcl-2 gene expression decreased in treated breast cancer cells. In conclusion, all the data indicated that the epoxide forms of lupeol, lutein and eugenol are potential drug candidates for inducing apoptosis in human breast cancer cells.

  3. Cloning, crystallization and preliminary X-ray study of XC1258, a CN-hydrolase superfamily protein from Xanthomonas campestris

    International Nuclear Information System (INIS)

    A CN-hydrolase superfamily protein from the plant pathogen X. campestris has been overexpressed in E. coli, purified and crystallized. CN-hydrolase superfamily proteins are involved in a wide variety of non-peptide carbon–nitrogen hydrolysis reactions, producing some important natural products such as auxin, biotin, precursors of antibiotics etc. These reactions all involve attack on a cyano or carbonyl carbon by a conserved novel catalytic triad Glu-Lys-Cys through a thiol acylenzyme intermediate. However, classification into the CN-hydrolase superfamily based on sequence similarity alone is not straightforward and further structural data are necessary to improve this categorization. Here, the cloning, expression, crystallization and preliminary X-ray analysis of XC1258, a CN-hydrolase superfamily protein from the plant pathogen Xanthomonas campestris (Xcc), are reported. The SeMet-substituted XC1258 crystals diffracted to a resolution of 1.73 Å. They are orthorhombic and belong to space group P21212, with unit-cell parameters a = 143.8, b = 154.63, c = 51.3 Å, respectively

  4. Copper chloride induces antioxidant gene expression but reduces ability to mediate H2O2 toxicity in Xanthomonas campestris.

    Science.gov (United States)

    Sornchuer, Phornphan; Namchaiw, Poommaree; Kerdwong, Jarunee; Charoenlap, Nisanart; Mongkolsuk, Skorn; Vattanaviboon, Paiboon

    2014-02-01

    Copper (Cu)-based biocides are currently used as control measures for both fungal and bacterial diseases in agricultural fields. In this communication, we show that exposure of the bacterial plant pathogen Xanthomonas campestris to nonlethal concentrations of Cu(2+) ions (75 µM) enhanced expression of genes in OxyR, OhrR and IscR regulons. High levels of catalase, Ohr peroxidase and superoxide dismutase diminished Cu(2+)-induced gene expression, suggesting that the production of hydrogen peroxide (H2O2) and organic hydroperoxides is responsible for Cu(2+)-induced gene expression. Despite high expression of antioxidant genes, the CuCl2-treated cells were more susceptible to H2O2 killing treatment than the uninduced cells. This phenotype arose from lowered catalase activity in the CuCl2-pretreated cells. Thus, exposure to a nonlethal dose of Cu(2+) renders X. campestris vulnerable to H2O2, even when various genes for peroxide-metabolizing enzymes are highly expressed. Moreover, CuCl2-pretreated cells are sensitive to treatment with the redox cycling drug, menadione. No physiological cross-protection response was observed in CuCl2-treated cells in a subsequent challenge with killing concentrations of an organic hydroperoxide. As H2O2 production is an important initial plant immune response, defects in H2O2 protection are likely to reduce bacterial survival in plant hosts and enhance the usefulness of copper biocides in controlling bacterial pathogens. PMID:24385479

  5. Voltage rise mitigation for solar PV integration at LV grids

    DEFF Research Database (Denmark)

    Yang, Guangya; Marra, Francesco; Juamperez Goñi, Miguel Angel;

    2015-01-01

    Solar energy from photovoltaic (PV) is among the fastest developing renewable energy systems worldwide. Driven by governmental subsidies and technological development, Europe has seen a fast expansion of solar PV in the last few years. Among the installed PV plants, most of them are situated...... at the distribution systems and bring various operational challenges such as power quality and power flow management. The paper discusses the modelling requirements for PV system integration studies, as well as the possible techniques for voltage rise mitigation at low voltage (LV) grids for increasing PV penetration...

  6. Comparison of photovoltaic (PV) panel usage in different climates

    OpenAIRE

    Kayalar, Rasiha

    2013-01-01

    ABSTRACT: In this thesis, PV panel usages will be analyzed in variable climates. By the way, during the research several case studies selected from both hot and cold climates will be observed, researched and calculated in order to find the best design principles for PV panel designs. So, comparative design method is selected to compare cold climate PV panel designs with hot climate PV panel designs. According to the findings, before designing the PV panel to the roof or facade or to the site,...

  7. Technologies to Increase PV Hosting Capacity in Distribution Feeders: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Ding, Fei; Mather, Barry; Gotseff, Peter

    2016-08-01

    This paper studies the distributed photovoltaic (PV) hosting capacity in distribution feeders by using the stochastic analysis approach. Multiple scenario simulations are conducted to analyze several factors that affect PV hosting capacity, including the existence of voltage regulator, PV location, the power factor of PV inverter and Volt/VAR control. Based on the conclusions obtained from simulation results, three approaches are then proposed to increase distributed PV hosting capacity, which can be formulated as the optimization problem to obtain the optimal solution. All technologies investigated in this paper utilize only existing assets in the feeder and therefore are implementable for a low cost. Additionally, the tool developed for these studies is described.

  8. PV_LIB Toolbox v. 1.3

    Energy Technology Data Exchange (ETDEWEB)

    2015-12-09

    PV_LIB comprises a library of Matlab? code for modeling photovoltaic (PV) systems. Included are functions to compute solar position and to estimate irradiance in the PV system’s plane of array, cell temperature, PV module electrical output, and conversion from DC to AC power. Also included are functions that aid in determining parameters for module performance models from module characterization testing. PV_LIB is open source code primarily intended for research and academic purposes. All algorithms are documented in openly available literature with the appropriate references included in comments within the code.

  9. Optimal Design of Modern Transformerless PV Inverter Topologies

    DEFF Research Database (Denmark)

    Saridakis, Stefanos; Koutroulis, Eftichios; Blaabjerg, Frede

    2013-01-01

    The design optimization of H5, H6, neutral point clamped, active-neutral point clamped, and conergy-NPC transformerless photovoltaic (PV) inverters is presented in this paper. The components reliability in terms of the corresponding malfunctions, affecting the PV inverter maintenance cost during...... clamped, active-neutral point clamped and conergy-NPC PV inverters designed using the proposed optimization process feature lower levelized cost of generated electricity and lifetime cost, longer mean time between failures and inject more PV-generated energy into the electric grid than their nonoptimized...... counterparts, thus maximizing the total economic benefit obtained during the operational time of the PV system....

  10. Prospects for PV generation and market in China

    International Nuclear Information System (INIS)

    Installation of PV power station in remote areas have benefited the local people solving a difficulty of no electricity. But the rural PV demonstration project is for assisting some poor residents without payback and completed for a society benefit. During the design of urban domestic architecture of the residential PV system integration with building, then the cost of PV will be acceptable comparing the cost of land and building. Especially while AC power is put into the market, the residential PV generation should be the more accessible

  11. Battery Energy Storage System for PV Output Power Leveling

    OpenAIRE

    Rajkiran Singh; Seyedfoad Taghizadeh; Nadia Mei Lin Tan; Jagadeesh Pasupuleti

    2014-01-01

    Fluctuating photovoltaic (PV) output power reduces the reliability in power system when there is a massive penetration of PV generators. Energy storage systems that are connected to the PV generators using bidirectional isolated dc-dc converter can be utilized for compensating the fluctuating PV power. This paper presents a grid connected energy storage system based on a 2 kW full-bridge bidirectional isolated dc-dc converter and a PWM converter for PV output power leveling. This paper propos...

  12. Accelerating residential PV expansion: demand analysis for competitive electricity markets

    International Nuclear Information System (INIS)

    This article quantifies the potential market for grid-connected, residential photovoltaic (PV) electricity integrated into new homes built in the US. It complements an earlier supply-side analysis by the authors that demonstrates the potential to reduce PV module prices below $1.5/Wp by scaling up existing thin-film technology in 100 MWp/yr manufacturing facilities. The present article demonstrates that, at that price, PV modules may be cost effective in 125,000 new home installations per year (0.5 GWp/yr). While this market is large enough to support multiple scaled up thin-film PV factories, inefficient energy pricing and demand-side market failures will inhibit prospective PV consumers without strong public policy support. Net metering rules, already implemented in many states to encourage PV market launch, represent a crude but reasonable surrogate for efficient electricity pricing mechanisms that may ultimately emerge to internalize the externality benefits of PV. These public benefits include reduced air pollution damages (estimated costs of damage to human health from fossil fuel power plants are presented in Appendix A), deferral of transmission and distribution capital expenditures, reduced exposure to fossil fuel price risks, and increased electricity system reliability for end users. Thus, net metering for PV ought to be implemented as broadly as possible and sustained until efficient pricing is in place. Complementary PV 'buydowns' (e.g., a renewable portfolio standard with a specific PV requirement) are needed to jumpstart regional PV markets

  13. Genetic diversity analysis of brassica napus/brassica campestris progenies using microsatellite markers

    International Nuclear Information System (INIS)

    Genetic diversity and relationship of F2 segregating progenies of interspecific crosses between B. napus N-501/B. campestris C-118 were studied. A set of 90 genotypes (2 parental lines and their 88 F2 progenies) was characterized separately using 24 microsatellite or SSR markers to cover the diversity as broadly as possibly present in them. In initial screening only 12 out of 24 SSR primers combination amplified DNA fragments, while the remaining 12 SSR primers did not amplify DNA fragment therefore those 12 SSR molecular markers were not used for further analysis. The 12 SSR primer combinations generated a total of 33 alleles, of that 32 were polymorphic loci, whereas only one was monomorphic locus. Primers BRMS-19 and BRMS-40 were highly polymorphic producing 4 bands each. Primer Ra2-D04 was less polymorphic and it produced only one band. The proportion of polymorphic loci was 95.83% which indicates high genetic diversity among the progenies. The average number of polymorphic alleles per locus was 2.66. The PIC values ranged from 0.395 for primer Ra2-E03 to 0.726 for primer BRMS-019 with an average genetic diversity (PIC value) of 0.584 per locus. Seven primers showed PIC values above 0.5 (50%) indicating high genetic diversity in the studied plant materials. Pair-wise similarity indices among 90 genotypes ranged from 0.3 to 0.95. Dendrogram obtained through UPGMA clustering of F2 progenies depicted eight main groups using similarity coefficient of 0.70. The progenies could be similar to their parents if they have the same banding patterns as that of the parents and could be distinguished from each other by the combination of fragments which are repeatedly present in one progeny and absent in the other. Considerable genetic diversity has been found among the F2 segregating progenies and their parents using SSR markers thus, SSR analysis proved to be a useful tool. (author)

  14. Fertilization in Brassica campestris ssp.pekinensis and its duration of each stage

    Institute of Scientific and Technical Information of China (English)

    PENG Jie; SHEN Jiaheng

    2007-01-01

    This paper reports the process of fertilization in Brassica campestris ssp.pekinensis and the duration of each stage.The results are as follows:(1)Pollen germinates on stigma 2-3 h after pollination.(2)4-8 h after pollination,pollen tube grows in the style.(3)8-14 h after pollination,pollen tube grows in the ovary and gets into the ovule via the micropyle.(4)16 h after pollination,one sperm nucleus moves to the egg and enters it.(5)The sperm nucleus adheres to the nuclear membrane of the egg 18 h after pollination.(6)20 h after pollination,it enters the egg nucleus and male chromatin gradually disperses and 24 h after pollination,a male nucleolus appears.A large female nucleolus and a small male nucleolus occur in the nucleus of the fertilized egg,and zygote formed.The dispersing of sperm chromatin in the egg nucleus takes about 4 h.(7)32--34 h after pollination,the division of zygote begins.The dormancy stage of the zygote lasts for about 8-10 h.(8)The pair polar nuclei lie in the chalazal end of the egg betbre fertilization,which may fuse into a secondary nucleus or not.(9)16-18 h after pollination,the sperm nucleus moves to the polar nuclei or the secondary nucleus.18 h after pollination,the sperm nucleus adheres to the nuclear membrane of the polar nuclei or that of the secondary nucleus.(10)20 h after pollination,the sperm nucleus enters one of the polar nuclei or the secondary nucleus and a triple fusion takes place.The process of fusion is similar to the karyogamy but faster.The dispersing of the sperm chromatin in the polar nucleus or secondary nucleus takes about 2 h.(11)22 h after pollination,the primary endosperm nucleus formed.The female and male nucleoli cannot fuse with each other betbre mitotic division of the primary endosperm nucleus.(12)24 h after pollination,the division of the primary endosperm nucleus actually takes place.

  15. Colonización radical por endófitos fúngicos en Trithrinax campestris (Arecaceae de ecosistemas semiáridos del centro de Argentina Root colonization by fungal endophytes in Trithrinax campestris (Arecaceae from semiarid ecosystems from Central Argentine

    Directory of Open Access Journals (Sweden)

    Mónica A Lugo

    2011-12-01

    Full Text Available En ecosistemas áridos y semiáridos las raíces de las plantas suelen formar simbiosis con hongos, los que les proporcionan nutrientes y agua. Poco se conoce sobre los hongos asociados a palmeras nativas y cómo éstos podrían estar relacionados entre ellos. Se describe y cuantifica la colonización radical de los simbiontes de Trithrinax campestris en poblaciones leve y fuertemente afectadas por el fuego. T. campestris fue colonizada por hongos micorrícico-arbusculares (HMA y endófitos septados oscuros (ESO. La colonización por HMA fue del tipo intermedio entre los tipos Arum y Paris. La colonización por HMA y ESO y la producción de pelos radicales, presentó diferencias entre las poblaciones estudiadas. Los resultados sugieren que en T. campestris la relación entre hongos simbiontes/producción de pelos radicales podrían estar relacionada con su alta tolerancia al fuego y la aridez.In arid and semiarid ecosystems, roots frequently form symbiosis with fungi that provides access to nutrients and water. Knowledge regarding the study of fungal symbionts colonizing native palms roots is still scarce. We described, quantified and compared fungal colonization in roots of Trithrinax campestris from two environmental situations: population with weak-burning-signs and population with strong-burning-signs. T. campestris was colonized by arbuscular-mycorrhizal-fungi (AMF and dark-septate-endophytes (DSE. AMF colonization was an intermediate type between Arum and Paris. The AMF and DSE colonization and root hair production differed between populations. Our results suggest that in T. campestris the relation between fungal-symbionts and root-hair-production might be related to tolerance to burning and aridity.

  16. Financial sustainability of PV implementation in Swaziland

    International Nuclear Information System (INIS)

    During the past 10 years, more than 700 Solar Home Systems have been implemented by this project in Swaziland, southern Africa. The implementation process started with household energy surveys, the results of which showing significant energy needs for cooking, lighting and basic communication applications (i.e. radio/TV), particularly in rural areas. An implementation project of Solar Home Systems was set up to start rural electrification with solar PV and focused on lighting and small electrical demands. The national government, whose own resources were limited, supported the project as an important step towards addressing the country's range of energy needs. Together with a local company, Swazitronix, a joint venture was established to facilitate the implementation project. With a project loan from the Dutch social bank, the Triodosbank, standard Solar Home Systems were sold, assembled, installed and serviced. Customers paid the full cost of their PV systems and services. Awareness and education issues also formed key aspects of the project. During a later project phase, credit financing instruments were introduced providing a final element of experience crucial to future project implementation. The project's relative success and experiences (i.e. 82% loan repayment rate, detailed review of the causes behind loan defaults, and monitoring survey results) are detailed herein, providing valuable lessons regarding financial sustainability, the linchpin of successful PV implementation. 8 refs

  17. Energy balance of the global photovoltaic (PV) industry--is the PV industry a net electricity producer?

    Science.gov (United States)

    Dale, Michael; Benson, Sally M

    2013-04-01

    A combination of declining costs and policy measures motivated by greenhouse gas (GHG) emissions reduction and energy security have driven rapid growth in the global installed capacity of solar photovoltaics (PV). This paper develops a number of unique data sets, namely the following: calculation of distribution of global capacity factor for PV deployment; meta-analysis of energy consumption in PV system manufacture and deployment; and documentation of reduction in energetic costs of PV system production. These data are used as input into a new net energy analysis of the global PV industry, as opposed to device level analysis. In addition, the paper introduces a new concept: a model tracking energetic costs of manufacturing and installing PV systems, including balance of system (BOS) components. The model is used to forecast electrical energy requirements to scale up the PV industry and determine the electricity balance of the global PV industry to 2020. Results suggest that the industry was a net consumer of electricity as recently as 2010. However, there is a >50% that in 2012 the PV industry is a net electricity provider and will "pay back" the electrical energy required for its early growth before 2020. Further reducing energetic costs of PV deployment will enable more rapid growth of the PV industry. There is also great potential to increase the capacity factor of PV deployment. These conclusions have a number of implications for R&D and deployment, including the following: monitoring of the energy embodied within PV systems; designing more efficient and durable systems; and deploying PV systems in locations that will achieve high capacity factors.

  18. An Analysis of Open World PvP in LOTRO's PvMP as a Case Study for PvP Games

    Directory of Open Access Journals (Sweden)

    Toh Weimin

    2014-11-01

    Full Text Available This article focuses on the analysis of emergent gameplay, based on a case study of the author's subjective gameplay experience of Player versus Monster Player (PvMP in The Lord of the Rings Online (LOTRO. The argument presented here is that although there is a core system of Player versus Player (PvP which LOTRO shares with other online games, each type of online game has a specific kind of PvP system which attracts players to engage in the gameplay. For instance, the open world sandbox type of PvP attracts certain players to play in LOTRO's PvMP. One of the main aims of this study is thus to investigate some of the core systems of PvP gameplay in open world sandbox PvP. In this article, LOTRO is shown to offer unique opportunities for studying emergent gameplay in open world games, with particular relevance to PvP studies. Two of the core systems of PvP discussed include the design of the simple gameplay rules to support emergent gameplay, and the community's attitudes towards player's behaviours. The types of emergent gameplay discussed include free play versus negotiated fair play, the players' utilisation of strategies in open world PvP to support collaborative and competitive gameplay, and the changing dynamics of open ended gameplay. It is hoped that the analysis provided in this article would form the­ basis of future work on a more general framework for understanding PvP in other online games.

  19. 海藻酸钙固定化对Xanthomonas campestris 206冰核活性的影响%Effect of Calcium Alginate Immobilization on Ice Nucleation Activity of Xanthomonas campestris 206

    Institute of Scientific and Technical Information of China (English)

    刘健; 陈庆森

    2002-01-01

    应用正交法研究了海藻酸钙固定化对Xanthomonas campestris 206冰核活性的影响.结果表明,对固定化小球冰核活性影响程度大小的顺序依次为:菌悬液用量>海藻酸钠用量>CaCl2浓度>固化时间,而对渗漏量影响程度大小的顺序依次为:菌悬液用量>固化时间>CaCl2浓度>海藻酸钠用量.研究中还发现,将冰核活性细菌固定化在热稳定性方面实际意义不大.

  20. Numerical study of PV/T-SAHP system

    Institute of Scientific and Technical Information of China (English)

    Gang PEI; Jie JI; Ke-liang LIU; Han-feng HE; Ai-guo JIANG

    2008-01-01

    In order to utilize solar energy effectively and to achieve a higher electrical efficiency by limiting the operating temperature of the photovoltaic (PV) panel, a novel photovoltaic/thermal solar-assisted heat pump (PV/T-SAHP) system was proposed and constructed. The hybrid solar system generates electricity and thermal energy simultaneously. A distributed parameters model of the PV/T-SAHP system was developed and applied to analyze the system dynamic performance in terms of PV action, photothermal action and Rankine cycle processes. The simulation results indicated that the coefficient of performance (COP) of the proposed PV/T-SAHP can be much better than that of the conventional heat pump. Both PV-efficiency and photothermic efficiency have been improved considerably. The results also showed that the performance of this PV/T-SAHP system was strongly influenced by the evaporator area, tube pitch and tilt angle of the PV/T evaporator, which are the key factors in PV/T-SAHP system optimization and PV/T evaporator design.

  1. PV solar electricity: status and future

    Science.gov (United States)

    Hoffmann, Winfried

    2006-04-01

    Within the four main market segments of PV solar electricity there are already three areas competitive today. These are off-grid industrial and rural as well as consumer applications. The overall growth within the past 8 years was almost 40 % p.a. with a "normal" growth of about 18 % p.a. for the first three market segments whereas the grid connected market increased with an astonishing 63 % p.a. The different growth rates catapulted the contribution of grid connected systems in relation to the total market from about one quarter 6 years ago towards more than three quarters today. The reason for this development is basically due to industry-politically induced market support programs in the aforementioned countries. It is quite important to outline under which boundary conditions grid connected systems will be competitive without support programs like the feed in tariff system in Germany, Spain and some more to come in Europe as well as investment subsidies in Japan, US and some other countries. It will be shown that in a more and more liberalized utility market worldwide electricity produced by PV solar electricity systems will be able to compete with their generating cost against peak power prices from utilities. The point of time for this competitiveness is mainly determined by the following facts: 1. Price decrease for PV solar electricity systems leading to an equivalent decrease in the generated cost for PV produced kWh. 2. Development of a truly liberalized electricity market. 3. Degree of irradiation between times of peak power demand and delivery of PV electricity. The first topic is discussed using price experience curves. Some explanations will be given to correlate the qualitative number of 20 % price decrease for doubling cumulative worldwide sales derived from the historic price experience curve with a more quantitative analysis based on our EPIA-Roadmap (productivity increase and ongoing improvements for existing technologies as well as development

  2. Produção de goma xantana por cepas nativas de Xanthomonas campestris a partir de casca de cacau ou soro de leite Production of xanthan gum by Xanthomonas campestris strains native from bark cocoa or whey

    Directory of Open Access Journals (Sweden)

    Denis de M. Diniz

    2012-01-01

    Full Text Available Foi estudada a otimização do processo de produção de goma xantana a partir de casca de cacau ou soro de leite como fonte de carbono, e determinou-se o rendimento da goma obtida pela bioconversão de casca de cacau e soro de leite com a Xanthomonas campestris 1182. A goma foi produzida em meios com potássio e nitrogênio a 25 °C, 250 rpm por 120 horas. Os rendimentos foram: 2,335 g.L-1 para a sacarose; 4,995 g.L-1 para a casca de cacau seca e 12,01 g.L-1 utilizando soro de leite. Portanto, é viável a produção de goma xantana utilizando fontes de carbono como a casca de cacau e o soro de leite.The optimization of the production process of xanthan gum from cocoa husks or milk whey as carbon source was studied, and the production rate of gum obtained by the bioconversion of cocoa pods and whey was determined, using Xanthomonas campestris 1182. The gum was produced in a medium with potassium and nitrogen at 25 °C, 250 rpm for 120 hours. The results were: 2.335 g.L-1 for sucrose; 4.995 g.L-1 for cocoa dry pods and 12.01 g.L-1 using whey. Therefore, the production of xanthan gum is feasible upon using carbon sources such as cocoa hulls and whey.

  3. NCBI nr-aa BLAST: CBRC-PABE-24-0066 [SEVENS

    Lifescience Database Archive (English)

    Full Text Available CBRC-PABE-24-0066 ref|NP_638404.1| cobalamin synthase [Xanthomonas campestris pv. campest...ris str. ATCC 33913] gb|AAM42328.1| cobalamin synthase [Xanthomonas campestris pv. campestris str. ATCC 33913] NP_638404.1 0.21 30% ...

  4. NCBI nr-aa BLAST: CBRC-CBRE-01-0086 [SEVENS

    Lifescience Database Archive (English)

    Full Text Available CBRC-CBRE-01-0086 gb|AAM42931.1| Na+:H+ antiporter [Xanthomonas campestris pv. campest...ris str. ATCC 33913] gb|AAY50772.1| Na+:H+ antiporter [Xanthomonas campestris pv. campestris str. 8004] AAM42931.1 0.42 31% ...

  5. NCBI nr-aa BLAST: CBRC-LAFR-01-1825 [SEVENS

    Lifescience Database Archive (English)

    Full Text Available CBRC-LAFR-01-1825 ref|YP_242368.1| MFS transporter [Xanthomonas campestris pv. campest...ris str. 8004] gb|AAY48348.1| MFS transporter [Xanthomonas campestris pv. campestris str. 8004] YP_242368.1 0.036 28% ...

  6. NCBI nr-aa BLAST: CBRC-LAFR-01-0106 [SEVENS

    Lifescience Database Archive (English)

    Full Text Available CBRC-LAFR-01-0106 ref|YP_242368.1| MFS transporter [Xanthomonas campestris pv. campest...ris str. 8004] gb|AAY48348.1| MFS transporter [Xanthomonas campestris pv. campestris str. 8004] YP_242368.1 1.2 24% ...

  7. PV technology and success of solar electricity in Vietnam

    Energy Technology Data Exchange (ETDEWEB)

    Dung, T.Q. [Vietnam National Center for Science and Technology, Ho Chi Minh City (Viet Nam). Solarlab

    1997-12-31

    Since 1990 the PV Technology and the Solar electricity have been strongly developed in Vietnam. The PV experts of Solarlab have studied and set up an appropriate PV Technology responding to local Market needs. It has not only stood well but has been also transferred to Mali Republic and Lao P.D.R. The PV off grid systems of Solarlab demonstrate good efficiency and low prices. Over 60 solar stations and villages have been built to provide solar lighting for about 3000 families along the country in remote, mountainous areas and islands. 400 families are using stand-alone Solar Home Systems. The Solar electricity has been chosen for Rural Electrification and National Telecommunication Network in remote and mountainous regions. Many International projects in cooperation with FONDEM-France, SELF USA and Governmental PV projects have been realized by Solarlab. The experiences of maintenance, management and finance about PV development in Vietnam are also mentioned.

  8. Design of a Solar Tracker System for PV Power Plants

    OpenAIRE

    Tiberiu Tudorache; Liviu Kreindler

    2010-01-01

    This paper deals with the design and execution of a solar tracker systemdedicated to the PV conversion panels. The proposed single axis solar tracker deviceensures the optimization of the conversion of solar energy into electricity by properlyorienting the PV panel in accordance with the real position of the sun. The operation of theexperimental model of the device is based on a DC motor intelligently controlled by adedicated drive unit that moves a mini PV panel according to the signals rece...

  9. Self-control system in storage unit of PV plants

    Energy Technology Data Exchange (ETDEWEB)

    Al-Shaban, Saad; Mohmoud, Ali [Hadhramout Univ. of Science and Technology, Faculty of Engineering, Mukalla (Yemen)

    2000-04-01

    A new system for self-controlling of storage batteries being charged by PV plants has been developed. This provides enhanced system reliability, lower system cost, and simpler operation for the user. In this system, the only requirement is to design and select PV panels so that their voltage-sensitive region (on the I-V curve) coincides with that required for a simpler remote PV plant and for long periods. (Author)

  10. Robustness analysis of the efficiency in PV inverters

    DEFF Research Database (Denmark)

    Pigazo, Alberto; Liserre, Marco; Blaabjerg, Frede;

    2013-01-01

    During last years an increasing attention has been paid to the efficiency of grid-connected PV inverters. They are manufactured from a number of discrete components and by using a certain topology and control strategy. Hence, the performance of a certain PV inverter not only depends on the selected...... provides a better understanding of the PV inverter performance and, in this sense, the definition of the European Efficiency must be reviewed in order to show the quality of the manufactured product....

  11. Interrogating Protective Space: Shielding, Nurturing and Empowering Dutch Solar PV

    OpenAIRE

    Bram Verhees; Rob Raven; Frank Veraart; Adrian Smith; Florian Kern

    2012-01-01

    This paper reviews the developments of solar photovoltaic technology in the Netherlands. Despite the recent boom in PV industries and deployment around the globe, the Dutch have until now not experienced major growth in the diffusion of PV electricity generation. But this is only part of the story. This paper focuses on the question why PV is still around in the Netherlands despite, at times, harsh policy and socio-economic contexts. It builds upon a recently developed framework from the fiel...

  12. PV window - Development and demonstrations. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Haugaard, P.

    2011-05-15

    Using the results from the EU project RenewTransnet, which focused on the development of a pane with integrated solar cells, the goal of this project is to develop these principles into a window solution. This window solution is targeted to Danish building tradition and architecture. It is expected that an elegant PV-window solution for both new and retrofit buildings is developed during this project, and which appearance can be customized to each building. Based on results from a related projects carried out by Gaia Solar, the window solution will have the potential of being approximately 30% cheaper than similar products on the market. In this project this price reduction is the objective of the development of a window solution. The project team has succeeded in developing a 2-layer PV-window with glass / glass lamination with EVA as foil, which is 35% cheaper than similar products on the market. Since the price for the frame-profile does not differ significantly at market level, the price comparison is made on the basis of the developed PV-pane. The objective of 30 % price reduction in relation to similar products on the market is met. A special production process to the making glass/glass lamination with EVA as foil has been developed, in which a frame is put around the module which intends both to remove the unwanted tension along the edges, and to prevent the significant spillage of EVA from the module under pressure and prevent the invasive bubbles along the edge of module. Since the developed production method for making glass/glass modules with EVA is simple, a further cost reduction will primarily be in a reduction of the price of the cell. The project process has resulted in the development of a product, which due to continuous restrictions in the building regulations, will be very attractive in future buildings. (LN)

  13. Characteristics of laboratory PV/T module

    International Nuclear Information System (INIS)

    The environmental temperature considerably influences the operation mode of silicon photovoltaic elements during the process of electricity generation. Part of solar radiation whose spectrum lies out of the spectral sensitivity of the these elements is usually transformed and dissipated in the space in the form of thermal energy. The purpose of this work is to demonstrate the way of operation and to study experimentally the working parameters of laboratory PV/T module (system), designed to transform and accumulate into useful energy the whole spectrum of the solar radiation

  14. Integrating Solar PV in Utility System Operations

    Energy Technology Data Exchange (ETDEWEB)

    Mills, A.; Botterud, A.; Wu, J.; Zhou, Z.; Hodge, B-M.; Heany, M.

    2013-10-31

    This study develops a systematic framework for estimating the increase in operating costs due to uncertainty and variability in renewable resources, uses the framework to quantify the integration costs associated with sub-hourly solar power variability and uncertainty, and shows how changes in system operations may affect these costs. Toward this end, we present a statistical method for estimating the required balancing reserves to maintain system reliability along with a model for commitment and dispatch of the portfolio of thermal and renewable resources at different stages of system operations. We estimate the costs of sub-hourly solar variability, short-term forecast errors, and day-ahead (DA) forecast errors as the difference in production costs between a case with “realistic” PV (i.e., subhourly solar variability and uncertainty are fully included in the modeling) and a case with “well behaved” PV (i.e., PV is assumed to have no sub-hourly variability and can be perfectly forecasted). In addition, we highlight current practices that allow utilities to compensate for the issues encountered at the sub-hourly time frame with increased levels of PV penetration. In this analysis we use the analytical framework to simulate utility operations with increasing deployment of PV in a case study of Arizona Public Service Company (APS), a utility in the southwestern United States. In our analysis, we focus on three processes that are important in understanding the management of PV variability and uncertainty in power system operations. First, we represent the decisions made the day before the operating day through a DA commitment model that relies on imperfect DA forecasts of load and wind as well as PV generation. Second, we represent the decisions made by schedulers in the operating day through hour-ahead (HA) scheduling. Peaking units can be committed or decommitted in the HA schedules and online units can be redispatched using forecasts that are improved

  15. Evaluation of a solar PV tracking prototype on tropic regions

    Directory of Open Access Journals (Sweden)

    Cristian Manuel Agudelo Restrepo

    2016-06-01

    Full Text Available Nowadays climate change is a big concern for human society, due to our high dependence on fossil fuels. A great amount of research effort is focused in solar photovoltaic (PV systems, particularly on the improvement of the conversion efficiency. One technique commonly used is the tracking systems, where the solar PV moves with the sun in order to capture the maximum direct solar radiation. This paper presents a solar PV single-axis tracking system prototype, and a comparison regarding its energy conversion efficiency with a fixed solar PV installation. The system was tested in Fusagasugá, Colombia, which is located in the tropics region.

  16. Solar Energy: Incentives to Promote PV in EU27

    Directory of Open Access Journals (Sweden)

    María del P. Pablo-Romero

    2013-11-01

    Full Text Available The growth in the use of renewable energies in the EU has been remarkable. Among these energies is PV. The average annual growth rate for the EU-27 countries in installed PV capacity in the period 2005-2012 was 41.2%. While the installed capacity of PV has reached almost 82 % of National Renewable Energy Action Plan (NREAP targets for the EU-27 countries for 2020, it is still far from being used at its full potential. Over recent years, several measures have been adopted in the EU to enhance and promote PV. This paper undertakes a complete review of the state of PV power in Europe and the measures taken to date to promote it in EU-27. 25 countries have adopted measures to promote PV. The most widespread measure to promote PV use is Feed- in Tariffs. Tariffs are normally adjusted, in a decreasing manner, annually. Nevertheless, currently, seven countries have decided to accelerate this decrease rate in view of cost reduction of the installations and of higher efficiencies. The second instrument used to promote PV in the EU-27 countries is the concession of subsidies. Nevertheless, subsidies have the disadvantage of being closely linked to budgetary resources and therefore to budgetary constraints. In most EU countries, subsidies for renewable energy for PV are being lowered. Twelve EU-27 countries adopted tax measures. Low-interest loans and green certificate systems were only sparingly used.

  17. Development of a Dispatchable PV Peak Shainv System. PV: Bonus Program - Phase 1 Report. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    None

    1995-10-01

    This report summarizes the work performed by Delmarva Power and Light and its subcontractors in Phase 1 of the US Department of Energy's PV:BONUS Program. The purpose of the program is to develop products and systems for buildings which utilize photovoltaic (N) technology. Beginning with a cooperative research effort with the University of Delaware's Center for Energy and Environmental Policy Research Delmarva Power developed and demonstrated the concept of Dispatchable PV Peak Shaving. This concept and the system which resulted horn the development work are unique from other grid-connected PV systems because it combines a PV, battery energy storage, power conversion and control technologies into an integrated package. Phase 1 began in July 1993 with the installation of a test and demonstration system at Delmarva's Northern Division General Office building near Newark, Delaware. Following initial testing throughout the summer and fall of 1993, significant modifications were made under an amendment to the DOE contract. Work on Phase 1 concluded in the early spring of 1995. Significant progress towards the goal of commercializing the system was made during Phase 1, and is summarized. Based on progress in Phase 1, a proposal to continue the work in Phase 2 was submitted to the US DOE in May 1995. A contract amendment and providing funds for the Phase 2 work is expected in July 1995.

  18. Projecting of PV facades in consideration of PV-specific operating conditions; Besonderheiten bei der Projektierung von Photovoltaik-Fassadenanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Decker, B.; Grimmig, B.; Mencke, D. [Institut fuer Solarenergieforschung GmbH Hameln/Emmerthal (ISFH), Emmerthal (Germany). Gruppe Photovoltaik-Systeme; Stellbogen, D. [Zentrum fuer Sonnenenergie- und Wasserstoff-Forschung Baden-Wuerttemberg (ZSW), Stuttgart (Germany). Fachgebiet Photovoltaische Anlagentechnik

    1998-02-01

    PV facades can provide several additional functions such as weather protection, thermal insulation, daylighting or sun protection. On the other hand, specific operating conditions for PV facades must be taken into account when selecting components and designing the system. Depending on ventilation conditions, there is a large range of maximum module temperatures. South-oriented PV facades receive about 30% less yearly irradiation than an optimally inclined PV generator, hence reflection losses are approximately 4% higher. The maximum of yearly irradiation lies only in the 400-600 W/m{sup 2} range. Surrounding buildings and/or vegetation can impair performance of the PV-facades. For a south-oriented PV facade an annual yield in the range of 470-560 kwh/kW{sub p}.a has been prodicted which was verified by operating results of eight PV facades. (orig.) [Deutsch] Photovoltaik (PV) Fassaden ermoeglichen neben der Stromerzeugung zusaetzliche Funktionen wie Wetterschutz bzw. Waermedaemmung des Gebaeudes oder Tageslichtnutzung bzw. Sonnenschutz der Innenraeume. Allerdings muessen fassadenspezifische Betriebsbedingungen, bei der Komponentenauswahl und Systemauslegung beruecksichtigt werden. Unterschiedliche Hinterlueftungsbedingungen fuehren zu einer grossen Bandbreite der maximalen Modultemperatur. PV-Suedfassaden empfangen etwa 30% weniger Jahreseinstrahlung als ein optimal geneigter PV-Generator. Die Haelfte der jaehrlichen Einstrahlung trifft mit Einfallswinkeln groesser 50 auf die vertikal angeordneten Module wodurch die Reflexionsverluste um ca. 4% hoeher sind. Das Maximum der Jahreseinstrahlung liegt nur um 400-600 W/m{sup 2} und erreicht selten Werte ueber 800 W/m{sup 2}. Umliegende Gebaeude oder Vegetation koennen zu Teilabschattungen des Generators fuehren. Fuer eine vertikale PV-Suedfassade wird ein Jahresenergieertrag in Hoehe von 470-560 kWh/kW{sub p}.a prognostiziert, der anhand der Betriebsergebnisse von acht PV-Fassadenanlagen verifiziert werden konnte

  19. Crystallization and preliminary crystallographic characterization of GumK, a membrane-associated glucuronosyltransferase from Xanthomonas campestris required for xanthan polysaccharide synthesis

    Energy Technology Data Exchange (ETDEWEB)

    Barreras, Máximo [Fundación Instituto Leloir, CONICET, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, C1405BWE Buenos Aires (Argentina); Bianchet, Mario A. [Department of Biophysics and Biophysical Chemistry, Johns Hopkins University, Baltimore, Maryland 21205 (United States); Ielpi, Luis, E-mail: lielpi@leloir.org.ar [Fundación Instituto Leloir, CONICET, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, C1405BWE Buenos Aires (Argentina)

    2006-09-01

    Crystallization of a membrane-associated glucuronosyltransferase. GumK is a membrane-associated inverting glucuronosyltransferase that is part of the biosynthetic route of xanthan, an industrially important exopolysaccharide produced by Xanthomonas campestris. The enzyme catalyzes the fourth glycosylation step in the pentasaccharide-P-P-polyisoprenyl assembly, an oligosaccharide diphosphate lipid intermediate in xanthan biosynthesis. GumK has marginal homology to other glycosyltransferases (GTs). It belongs to the CAZy family GT 70, for which no structure is currently available, and indirect biochemical evidence suggests that it also belongs to the GT-B structural superfamily. Crystals of recombinant GumK from X. campestris have been grown that diffract to 1.9 Å resolution. Knowledge of the crystal structure of GumK will help in understanding xanthan biosynthesis and its regulation and will also allow a subsequent rational approach to enzyme design and engineering. The multiwavelength anomalous diffraction approach will be used to solve the phase problem.

  20. Crystallization and preliminary crystallographic characterization of GumK, a membrane-associated glucuronosyltransferase from Xanthomonas campestris required for xanthan polysaccharide synthesis

    International Nuclear Information System (INIS)

    Crystallization of a membrane-associated glucuronosyltransferase. GumK is a membrane-associated inverting glucuronosyltransferase that is part of the biosynthetic route of xanthan, an industrially important exopolysaccharide produced by Xanthomonas campestris. The enzyme catalyzes the fourth glycosylation step in the pentasaccharide-P-P-polyisoprenyl assembly, an oligosaccharide diphosphate lipid intermediate in xanthan biosynthesis. GumK has marginal homology to other glycosyltransferases (GTs). It belongs to the CAZy family GT 70, for which no structure is currently available, and indirect biochemical evidence suggests that it also belongs to the GT-B structural superfamily. Crystals of recombinant GumK from X. campestris have been grown that diffract to 1.9 Å resolution. Knowledge of the crystal structure of GumK will help in understanding xanthan biosynthesis and its regulation and will also allow a subsequent rational approach to enzyme design and engineering. The multiwavelength anomalous diffraction approach will be used to solve the phase problem

  1. Modeling and simulation of a grid connected PV system based on the evaluation of main PV module parameters

    OpenAIRE

    Chouder, Aissa; Silvestre Bergés, Santiago; Sadaoui, Nawel; Rahmani, Lazhar

    2012-01-01

    In this work we present a new method for the modeling and simulation study of a photovoltaic grid connected system and its experimental validation. This method has been applied in the simulation of a grid connected PV system with a rated power of 3.2 Kwp, composed by a photovoltaic generator and a single phase grid connected inverter. First, a PV module, forming part of the whole PV array is modeled by a single diode lumped circuit and main parameters of the PV module are evaluated. Results o...

  2. The potential market for PV building products

    International Nuclear Information System (INIS)

    This study was carried out by ECOTEC Research and Consulting Limited (ECOTEC) in collaboration with the Newcastle Photovoltaic Application Centre (NPAC) and ECD Energy and Environment (ECD) under the Department of Trade and Industry's (DTI) New and Renewable Energy Programme (contract reference S/P2/00277/00/00). The aim was to assess the future market potential for building-integrated photovoltaic (BIPV) products in terms of current product availability, product development needs, the nature and size of the potential market, and the opportunities for government and the PV supply industry to work together to develop the market. The study itself comprised a review of existing BIPV products, an analysis of the development of the world market for BIPV, a market research survey of building professionals, and meetings of two 'focus groups' drawn from the PV 'supply side' and from buildings professionals. In principle, BIPV products can be used in virtually any type of building, but the main applications are considered to be housing and offices. (author)

  3. Impact of residential PV adoption on Retail Electricity Rates

    International Nuclear Information System (INIS)

    The price of electricity supplied from home rooftop photo voltaic (PV) solar cells has fallen below the retail price of grid electricity in some areas. A number of residential households have an economic incentive to install rooftop PV systems and reduce their purchases of electricity from the grid. A significant portion of the costs incurred by utility companies are fixed costs which must be recovered even as consumption falls. Electricity rates must increase in order for utility companies to recover fixed costs from shrinking sales bases. Increasing rates will, in turn, result in even more economic incentives for customers to adopt rooftop PV. In this paper, we model this feedback between PV adoption and electricity rates and study its impact on future PV penetration and net-metering costs. We find that the most important parameter that determines whether this feedback has an effect is the fraction of customers who adopt PV in any year based solely on the money saved by doing so in that year, independent of the uncertainties of future years. These uncertainties include possible changes in rate structures such as the introduction of connection charges, the possibility of PV prices dropping significantly in the future, possible changes in tax incentives, and confidence in the reliability and maintainability of PV. -- Highlights: •Households who install PV reduce their electricity consumption from the grid. •Electricity rates must increase for utility companies to recover its fixed costs. •However, higher electricity rates give households more incentives to adopt PV. •We find that this feedback has significant impact on PV uptake only in later years. •Utility companies could lose a significant fraction of high consumption customers

  4. Origins and Evolution of Brassica campestris L.in China%白菜型油菜在中国的起源与进化

    Institute of Scientific and Technical Information of China (English)

    何余堂; 陈宝元; 傅廷栋; 李殿荣; 涂金星

    2003-01-01

    以云南长角(甘蓝型油菜,B.napus)、青海牛尾梢(芥菜型油菜,B.juncea)、汕头芥蓝(B.alboglabra)和黑芥(B.nigra cy giebra)为参照品种,对不同地理来源的82份白菜型油菜(B.campestris L.)资源进行了形态学鉴定和RAPD分子标记分析.利用分子进化遗传分析软件(MEGA)构建白菜型油菜的系统发育树,以揭示白菜型油菜在我国的起源与进化.分析表明:北方小油菜(B.campestris var.oleifera)的起源早于南方油白菜(B.chinensis var.oleifera);冬油菜(Winter type B.campestris var.oleifera)的起源早于春油菜(Spring type B.campestris var.oleifera);关中蔓菁是起源较早的北方小油菜.陕西可能是北方小油菜的起源地,后来逐渐分化出广泛种植于甘肃、青海等地的春油菜;南方油白菜可能起源于云南、贵州、四川、湖北等地.形态性状与分子标记相结合,可用于研究白菜型油菜的起源与进化.

  5. Step-Stress Accelerated Degradation Testing (SSADT) for Photovoltaic (PV) Devices and Cells (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Lee, J.; Elmore, R.; Suh, C.; Jones, W.

    2010-10-01

    Presentation on step-stress accelerated degradation testing (SSADT) for photovoltaics (PV). Developed are a step-stress degradation test (SSADT) for PV reliability tests and a lifetime prediction model for PV products.

  6. Energy requirements and CO2 mitigation potential of PV systems

    NARCIS (Netherlands)

    Alsema, E.A.

    2006-01-01

    In this paper we investigate the energy requirements of PV modules and systems and calculate the Energy Pay-Back Time for two major PV applications. Based on a review of past energy analysis studies we explain the main sources of differences and establish a "best estimate" for key system components.

  7. Development of PV powered consumer products using future scenarios

    NARCIS (Netherlands)

    Reinders, A.H.M.E.; Meulen, van der B.J.R.; Eger, A.O.

    2006-01-01

    Given the high potential of PV technology to reduce the environmental impact of electricity use of consumer products, it would be worthwhile to advance the application of PV systems in mass produced products. To date this field of application has been explored only to a limited extent. For this reas

  8. MONITOR THE PHOTOVOLTAIC (PV) SYSTEM ON THE NCC ROOFTOP

    Science.gov (United States)

    This study will investigate the pollution emission reduction and demand-side management potential of a100 kW PV system located on the roof of the National Computer Center (NCC). Standardized instrumentation to measure meteorological and PV system performance variables will b...

  9. Solar PV O&M standards and best practices :

    Energy Technology Data Exchange (ETDEWEB)

    Klise, Geoffrey Taylor; Balfour, John R.; Keating, T. J.

    2014-11-01

    As greater numbers of photovoltaic (PV) systems are being installed, operations & maintenance (O&M) activities will need to be performed to ensure the PV system is operating as designed over its useful lifetime. To mitigate risks to PV system availability and performance, standardized procedures for O&M activities are needed to ensure high reliability and long-term system bankability. Efforts are just getting underway to address the need for standard O&M procedures as PV gains a larger share of U.S. generation capacity. Due to the existing landscape of how and where PV is installed, including distributed generation from small and medium PV systems, as well as large, centralized utility-scale PV, O&M activities will require different levels of expertise and reporting, making standards even more important. This report summarizes recent efforts made by solar industry stakeholders to identify the existing standards and best practices applied to solar PV O&M activities, and determine the gaps that have yet to be, or are currently being addressed by industry.

  10. Applications of ``PV Optics`` for solar cell and module design

    Energy Technology Data Exchange (ETDEWEB)

    Sopori, B.L.; Madjdpour, J.; Chen, W. [National Renewable Energy Lab., Golden, CO (United States)

    1998-09-01

    This paper describes some applications of a new optics software package, PV Optics, developed for the optical design of solar cells and modules. PV Optics is suitable for the analysis and design of both thick and thin solar cells. It also includes a feature for calculation of metallic losses related to contacts and back reflectors.

  11. National survey report on PV power applications in Switzerland 2006

    Energy Technology Data Exchange (ETDEWEB)

    Huesser, P. [Nova Energie GmbH, Aarau (Switzerland); Hostettler, T. [Ingenieurbuero Hostettler, Berne (Switzerland)

    2007-07-01

    This annual report was published by the Swiss Federal Office of Energy (SFOE) as part of the International Energy Agency's work on the exchange and dissemination of information on photovoltaic power systems (PVPS). The political situation in Switzerland with regard to the promotion of photovoltaics (PV) and new legislation in the energy area is discussed. The report provides information on installed PV power, costs and prices and the Swiss PV industry. Examples of PV applications are presented and data on the cumulative installed PV power in various application sectors is presented and discussed. Highlights, major projects and various demonstration and field-test programmes are dealt with, as are public budgets for market stimulation. Figures on the development, production and prices of PV cells and modules are presented. Swiss balance-of-system products are reviewed, as are PV-related services and the value of the Swiss PV business. A review of non-technical factors and new initiatives completes the report.

  12. Product integrated PV: the future is design and styling

    NARCIS (Netherlands)

    Eggink, Wouter; Reinders, Angèle

    2016-01-01

    In this paper we explore how PV powered products have been designed in the past. For this purpose we have drawn a historical time line of the design features of PV powered products in the context of main stream design and styling. Our time frame is 1970 till 2016, focusing in first instance on consu

  13. Costs of Residential Solar PV Plants in Distribution Grid Networks

    DEFF Research Database (Denmark)

    Kjær, Søren Bækhøj; Yang, Guangya; Ipsen, Hans Henrik;

    2015-01-01

    In this article we investigate the impact of residential solar PV plants on energy losses in distribution networks and their impact on distribution transformers lifetime. Current guidelines in Denmark states that distribution transformers should not be loaded with more than 67% solar PV power...... to avoid accelerated loss of life. If a solar PV plant causes this limit to be exceeded, the particular owner has to pay for upgrading the transformer. Distribution Network Operators also charge an annual tariff from the solar PV plants to cover the expenses to keep the grid capacity available, the so...... called “Availability Tariff”. According to the Danish Energy Regulatory Authority, the Availability Tariff must cover the exact expenses, with energy savings etc. from the solar PV plants taken into consideration. Our conclusion is that a distribution network, which represents a typical residential...

  14. Codes, standards, and PV power systems. A 1996 status report

    Energy Technology Data Exchange (ETDEWEB)

    Wiles, J

    1996-06-01

    As photovoltaic (PV) electrical power systems gain increasing acceptance for both off-grid and utility-interactive applications, the safety, durability, and performance of these systems gains in importance. Local and state jurisdictions in many areas of the country require that all electrical power systems be installed in compliance with the requirements of the National Electrical Code{reg_sign} (NEC{reg_sign}). Utilities and governmental agencies are now requiring that PV installations and components also meet a number of Institute of Electrical and Electronic Engineers (IEEE) standards. PV installers are working more closely with licensed electricians and electrical contractors who are familiar with existing local codes and installation practices. PV manufacturers, utilities, balance of systems manufacturers, and standards representatives have come together to address safety and code related issues for future PV installations. This paper addresses why compliance with the accepted codes and standards is needed and how it is being achieved.

  15. Country specific added value analysis of PV systems

    Energy Technology Data Exchange (ETDEWEB)

    Suna, Demet; Haas, Reinhard; Lopez-Polo, Assumpcio [Vienna Univ. of Technology (Austria). Energy Economics Group

    2008-07-01

    International Energy Agency's research programme IEA-PVPS-Task 10 and the European research project PV-UP-SCALE emphasize ''PV in urban areas''. Oneactivity of some collective works of these projects is dedicated to Value Analysis, whose major purpose is to identify, quantify and evaluate the values and benefits of building integrated grid connected PV systems. The identification of values will provide at least some sort of justification with regard the PV supporting strategies to remove financial barriers, which are heavily discussed elsewhere, and present the benefits to diverse stakeholders which are necessary for a wider market penetration of PV technology. The analysis of each value includes the derivation of a general methodological approach which is suitable for all countries/regions analysed, whilst the quantifiable examples aim to demonstrate country specific differences and perceptions. (orig.)

  16. Physical Effects of Distributed PV Generation on California's Distribution System

    CERN Document Server

    Cohen, Michael A

    2015-01-01

    Deployment of high-penetration photovoltaic (PV) power is expected to have a range of effects -- both positive and negative -- on the distribution grid. The magnitude of these effects may vary greatly depending upon feeder topology, climate, PV penetration level, and other factors. In this paper we present a simulation study of eight representative distribution feeders in three California climates at PV penetration levels up to 100\\%, supported by a unique database of distributed PV generation data that enables us to capture the impact of PV variability on feeder voltage and voltage regulating equipment. When comparing the influence of feeder location (i.e. climate) versus feeder type on outcomes, we find that location more strongly influences the incidence of reverse power flow, reductions in peak loading and the presence of voltage excursions. On the other hand, we find that feeder characteristics more strongly influence the magnitude of loss reduction and changes in voltage regulator operations. We find th...

  17. Optimum Design Of On Grid Pv System Using Tracking System

    Directory of Open Access Journals (Sweden)

    Saeed Mansour

    2015-05-01

    Full Text Available Abstract The fossil fuel is a main issue in the world due to the increase of fossil fuel cost and the depletion of the fossil fuel with continuous increasing demand on electricity. With continuous decrease of PV panels cost it is interesting to consider generation of electricity from PV system. To provide electric energy to a load in a remote area where electric grid utility is not available or connection with grid utility is available there are two approaches of photovoltaic system PV without tracking system Fixed System and PV with tracking systems. The result shows that the energy production by using PV with tracking system generates more energy in comparison with fixed panels system. However the cost per produced KWH is less in case of using fixed panels. This is the backbone in choice between two approaches of photovoltaic system. In this work a system design and cost analysis for two approaches of photovoltaic system are considered.

  18. 一个新的体外快速鉴定十字花科黑腐病菌Ⅲ型效应物的报告质粒的构建%Construction of A New Reporter Plasmid to Identify the Type Ⅲ Effectors in Xanthomonas campestris in vitro

    Institute of Scientific and Technical Information of China (English)

    唐菲菲; 韩恩兴; 梁业瀛; 刘三; 姜伯乐

    2011-01-01

    植物病原菌侵染寄主的过程就是病原菌和寄主植物相互作用的过程.在这个相互作用过程中,Ⅲ型分泌系统和Ⅲ效应物与病原菌致病密切相关.大部分革兰氏阴性植物病原菌通过Ⅲ型分泌系统定向的把效应物蛋白传递到宿主细胞,效应物蛋白进入植物体引起致病或过敏反应.本研究将百日咳杆菌的腺苷酸环化酶基因连接至含启动子的pLAFRJ载体上,从而构建出一个新的体外快速鉴定Ⅲ型效应物的报告质粒pJJA,并用已鉴定为Ⅲ型效应物基因的十字花科黑腐病菌XC1553的启动子和信号区验证该报告质粒,证明这个系统是可以工作的.该报告质粒为进一步精确筛选鉴定十字花科黑腐病菌Ⅲ型效应物提供了材料.%The infection process of plant pathogen is a interaction between phytopathogens and host plants. Type Ⅲ secretion system and type Ⅲ effectors are closely related and pathogen virulence. Most gram-negative phytopathogens deliver the effector protein directly into the host cell through type Ⅲ secretion system, causing disease or hypersensitive reaction. In this research the adenylate cyclase gene of Bordetella pertussis was cloned into pLAFRJ which contains a promoter, yielding a new reporter plasmid pJJA which can be used to identify the type Ⅲ effectors efficiently in vitro. The promoter and signal region of XC1553 which has been identified as type Ⅲ effectors in Xanthomonas campestris pv. Campestris (Xcc) was used to verify the report plasmid. The results of cAMP concentration detection assay in Brassica oleracea leaves demonstrated that the new report plasmid pJJA works well. The report plasmid provides material for further precise screening type Ⅲ effectors in Xcc.

  19. Do feed-in tariffs drive PV cost or viceversa?

    International Nuclear Information System (INIS)

    Highlights: • The distribution of PV installations on the territory is not a function of the solar radiation. • Cost of PV plants were adapted to the FIT framework. • The FIT for PV in Italy was considered an incentive to financial investment. • The FIT for PV in Italy did not stimulate the development of national PV industry. - Abstract: A survey of the PV market in Italy was done studying a number of installations of different sizes whose economic data were known and assessed. The Italian market has experienced a boom in the PV market after the first mechanism of feed-in tariffs was promoted in 2005. The variations of the tariff structure in the following years have caused significant changes in the market structure in terms of average size and technical characteristics of installed plants. However, an Italian PV industry was not stimulated by the incentives and only companies involved in installation and maintenance were created. At the same time, the cost of the PV plants components, design and commissioning have followed quite a particular trend, which is more determined by the tariffs than by the market development and structure. It is quite clear that the costs of PV plants component are not driven by the amount of installations but by the tariffs, with a trend that follows the decreases in the incentives and not the global installed power. It is therefore very important to study the right tariff mechanisms and benefits to avoid financial disturbances on the market and to promote a real competitive market instead of a simple financial operation under a fake façade of green economy

  20. Molecular detection of Xanthomonas oryzae pv. oryzae, Xanthomonas oryzae pv. oryzicola, and Burkholderia glumae in infected rice seeds and leaves

    Science.gov (United States)

    Polymerase chain reaction (PCR) is particularly useful for plant pathogen detection. In the present study, multiplex PCR and SYBR green real-time PCR were developed to facilitate simultaneous detection of three important rice pathogens, Xanthomonas oryzae pv. oryzae, X. oryzae pv. oryzicola, and Bur...

  1. Fidelity Susceptibility as Holographic PV criticality

    CERN Document Server

    Momeni, Davood; Myrzakulov, Ratbay

    2016-01-01

    Motivated by the fact that the quantum entanglement entropy is dual to an area in AdS, quantities dual to a volume in the AdS have also been recently proposed. These include the holographic complexity and fidelity susceptibility of a quantum system. Even though both of them are dual to an volume in the bulk, there are some interesting difference between them. In this letter, we will explicitly compare them for an $ AdS _4$ solution, and clarify the main differences between them from thermodynamic point of the view. We will also obtain the correct and appropriate holographic dual of the thermodynamic volume of AdS blackhole, and demonstrate that to explain therodynamic in extended phase PV picture, from the AdS/CFT point of view,fidelity susceptibility is the preferred quantity in comparison to holographic complexity.

  2. Innovations in Wind and Solar PV Financing

    Energy Technology Data Exchange (ETDEWEB)

    Cory, K.; Coughlin, J.; Jenkin, T.; Pater, J.; Swezey, B.

    2008-02-01

    There is growing national interest in renewable energy development based on the economic, environmental, and security benefits that these resources provide. Historically, greater development of our domestic renewable energy resources has faced a number of hurdles, primarily related to cost, regulation, and financing. With the recent sustained increase in the costs and associated volatility of fossil fuels, the economics of renewable energy technologies have become increasingly attractive to investors, both large and small. As a result, new entrants are investing in renewable energy and new business models are emerging. This study surveys some of the current issues related to wind and solar photovoltaic (PV) energy project financing in the electric power industry, and identifies both barriers to and opportunities for increased investment.

  3. Electrochemical Approaches to PV Busbar Application

    Energy Technology Data Exchange (ETDEWEB)

    Pankow, J. W.

    2005-01-01

    Busbars are an integral component of any thin-film photovoltaic module and must be easy and quick to apply by PV manufacturers, as well as provide long-term reliability in deployed modules. Potential reliability issues include loss of adhesion and delamination, chemical instability under current collection conditions (electromigration or corrosion), compatibility of material and application method with subsequent encapsulation steps. Several new and novel busbar materials and application methods have been explored, including adhering metal busbars with various one- and two-part conductive epoxies or conductive adhesive films, ultrasonic bonding of metal busbar strips, and bonding of busbar strips using low-temperature solders. The most promising approach to date has been the direct application of metal busbars via various electrochemical techniques, which offers a variety of distinct advantages.

  4. Valley of Death analysis for polymer PV technology; Valley of Death analyse voor polymere PV technologie

    Energy Technology Data Exchange (ETDEWEB)

    Schoots, K. [ECN Beleidsstudies, Petten (Netherlands)

    2013-12-15

    This report describes the results of a qualitative study of the barriers that actors involved in the development and commercialization of polymer solar cells, may encounter. The purpose of this socio-economic research is to identify these barriers for the (market) development of thin film polymeric PV technology and to develop strategies for them in order to overcome the constraints. The necessary data are collected from interviews with actors who are active in the development and deployment of conventional solar cells. Based on the results from this study, it is conclude that it is important for the Organic PV industry to carry out many market experiments beyond the built environment. The report provides recommendations with regard to the markets in which these experiments are most likely to succeed and which drivers should be taken into account [Dutch] Dit rapport beschrijft de resultaten van een kwalitatief onderzoek naar de barrieres die actoren, betrokken bij de ontwikkeling en marktintroductie van polymere zonnecellen, kunnen tegenkomen. Het doel van dit sociaal-economische onderzoek is deze barrieres voor de (markt)ontwikkeling van dunne film polymere PV technologie te identificeren en strategieen te ontwikkelen om ze voor te zijn of ze te overbruggen. De benodigde gegevens worden verzameld uit interviews met actoren die actief zijn in de ontwikkeling en uitrol van conventionele zonnecellen. Op basis van de resultaten uit dit onderzoek komen we tot de conclusie dat het voor de Organische PV sector belangrijk is veel marktexperimenten aan te gaan buiten de gebouwde omgeving. Het rapport geeft aanbevelingen in welke soort markten deze experimenten de meeste kans van slagen hebben en met welke drivers van marktpartijen rekening moet worden gehouden.

  5. Kauai Island Utility Co-op (KIUC) PV integration study.

    Energy Technology Data Exchange (ETDEWEB)

    Ellis, Abraham; Mousseau, Tom (Knoxville, TN)

    2011-08-01

    This report investigates the effects that increased distributed photovoltaic (PV) generation would have on the Kauai Island Utility Co-op (KIUC) system operating requirements. The study focused on determining reserve requirements needed to mitigate the impact of PV variability on system frequency, and the impact on operating costs. Scenarios of 5-MW, 10-MW, and 15-MW nameplate capacity of PV generation plants distributed across the Kauai Island were considered in this study. The analysis required synthesis of the PV solar resource data and modeling of the KIUC system inertia. Based on the results, some findings and conclusions could be drawn, including that the selection of units identified as marginal resources that are used for load following will change; PV penetration will displace energy generated by existing conventional units, thus reducing overall fuel consumption; PV penetration at any deployment level is not likely to reduce system peak load; and increasing PV penetration has little effect on load-following reserves. The study was performed by EnerNex under contract from Sandia National Laboratories with cooperation from KIUC.

  6. Analysis of Hydroxy Fatty Acids from the Pollen of Brassica campestris L. var. oleifera DC. by UPLC-MS/MS

    Directory of Open Access Journals (Sweden)

    Nian-Yun Yang

    2013-01-01

    Full Text Available Ultraperformance liquid chromatography coupled with negative electrospray tandem mass spectrometry (UPLC-ESI-MS/MS was used to determine 7 hydroxy fatty acids in the pollen of Brassica campestris L. var. oleifera DC. All the investigated hydroxy fatty acids showed strong deprotonated molecular ions [M–H]−, which underwent two major fragment pathways of the allyl scission and the β-fission of the alcoholic hydroxyl group. By comparison of their molecular ions and abundant fragment ions with those of reference compounds, they were tentatively assigned as 15,16-dihydroxy-9Z,12Z-octadecadienoic acid (1, 10,11,12-trihydroxy-(7Z,14Z-heptadecadienoic acid (2, 7,15,16-trihydroxy-9Z,12Z-octadecadienoic acid (3, 15,16-dihydroxy-9Z,12Z-octadecadienoic acid (4, 15-hydroxy-6Z,9Z,12Z-octadecatrienoic acid (5, 15-hydroxy-9Z,12Z- octadecadienoic acid (6, and 15-hydroxy-12Z-octadecaenoic acid (7, respectively. Compounds 3, 5, and 7 are reported for the first time.

  7. Relative degree of susceptibility and resistance of different brassica campestris l. genotypes against aphid myzus persicae- a field investigation

    International Nuclear Information System (INIS)

    Field evaluation of twenty three Brassica campestris L. genotypes was conducted for aphid (Homoptera: Aphididae) resistance during 2008 crop season. The parameters used to assess tolerance of germplasm lines included pest population during growth season and grain yield at crop maturity. Aphids showed obvious preferences for all of the germplasm investigated; however, the evaluation for resistance to pest identified several genotypes with variable potential for tolerance and sensitivity. Estimated grain yield also varied significantly due to variable pest intensity noted, and seemed to be more appropriately dependent on the pest population conditions at the experimental site. Among the germplasm, the estimation obtained regarding both the parameters sorted out MM-II/02-3 and MM-I285 genotypes as most tolerant due to less pest infestation and damage. Peak infestations by aphid caused severe crop fatalities on S-9-S-97-0.75+75/55 and S-9-1006/95 genotypes, affecting the seed weight and resulting an immense reduction in grain Brassica genotypes appeared to be governed by means of varietals characteristics of diverse germplasms. The result of resistance test conducted under field environment is an effective and consistent approach in the practical selection of crop lines resistant or partially resistant to pests for use in future breeding programs. (author)

  8. Effects of low temperature on the sugar and ascorbic acid contents of komatsuna (Brassica campestris L.) under limited solar radiation

    International Nuclear Information System (INIS)

    The effects of low temperature on the sugar and ascorbic acid contents of Komatsuna (Brassica campestris L.) plants grown under limited solar radiation in the greenhouse were evaluated. Komatsuna plants were grown in a greenhouse in which the mean air temperature was maintained between 13 degree C and 15 degree C (defined as the 'cool temperature' condition). The solar radiation in the greenhouse fluctuated between 2 and 4 MJ/m2. day-l during the experiment. When Komatsuna plants grew to about 20 cm height, they were transferred to a greenhouse in which the mean air temperature fluctuated between 2 degree C and 3 degree C (defined as the 'cold temperature' or 'cold treatment'). The total sugar contents in leaf blades and in petioles of Komatsuna plants increased rapidly as a function of the cold treatment. The total ascorbic acid content in the leaf blades increased rapidly after the initiation of cold treatment, whereas that content in the petioles increased gradually. On the other hand, the composition of the leaf blades and petioles in the Komatsuna plants did not change when grown continuously in the cool plot. The data show that cold treatment promoted the per unit area production of the total sugar and total ascorbic acid. These results indicate that cold treatment could improve the nutritional qualities of Komatsuna plants, even under limited solar radiation in winter,

  9. Genetic damage induced by a food coloring dye (sunset yellow) on meristematic cells of Brassica campestris L.

    Science.gov (United States)

    Dwivedi, Kshama; Kumar, Girjesh

    2015-01-01

    We have performed the present piece of work to evaluate the effect of synthetic food coloring azo dye (sunset yellow) on actively dividing root tip cells of Brassica campestris L. Three doses of azo dye were administered for the treatment of actively dividing root tip cells, namely, 1%, 3%, and 5%, for 6-hour duration along with control. Mitotic analysis clearly revealed the azo dye induced endpoint deviation like reduction in the frequency of normal divisions in a dose dependent manner. Mitotic divisions in the control sets were found to be perfectly normal while dose based reduction in MI was registered in the treated sets. Azo dye has induced several chromosomal aberrations (genotoxic effect) at various stages of cell cycle such as stickiness of chromosomes, micronuclei formation, precocious migration of chromosome, unorientation, forward movement of chromosome, laggards, and chromatin bridge. Among all, stickiness of chromosomes was present in the highest frequency followed by partial genome elimination as micronuclei. The present study suggests that extensive use of synthetic dye should be forbidden due to genotoxic and cytotoxic impacts on living cells. Thus, there is an urgent need to assess potential hazardous effects of these dyes on other test systems like human and nonhuman biota for better scrutiny.

  10. Genetic Damage Induced by a Food Coloring Dye (Sunset Yellow on Meristematic Cells of Brassica campestris L.

    Directory of Open Access Journals (Sweden)

    Kshama Dwivedi

    2015-01-01

    Full Text Available We have performed the present piece of work to evaluate the effect of synthetic food coloring azo dye (sunset yellow on actively dividing root tip cells of Brassica campestris L. Three doses of azo dye were administered for the treatment of actively dividing root tip cells, namely, 1%, 3%, and 5%, for 6-hour duration along with control. Mitotic analysis clearly revealed the azo dye induced endpoint deviation like reduction in the frequency of normal divisions in a dose dependent manner. Mitotic divisions in the control sets were found to be perfectly normal while dose based reduction in MI was registered in the treated sets. Azo dye has induced several chromosomal aberrations (genotoxic effect at various stages of cell cycle such as stickiness of chromosomes, micronuclei formation, precocious migration of chromosome, unorientation, forward movement of chromosome, laggards, and chromatin bridge. Among all, stickiness of chromosomes was present in the highest frequency followed by partial genome elimination as micronuclei. The present study suggests that extensive use of synthetic dye should be forbidden due to genotoxic and cytotoxic impacts on living cells. Thus, there is an urgent need to assess potential hazardous effects of these dyes on other test systems like human and nonhuman biota for better scrutiny.

  11. The Dynamic Growth Exhibition and Accumulation of Cadmium of Pak Choi (Brassica campestris L. ssp. chinensis Grown in Contaminated Soils

    Directory of Open Access Journals (Sweden)

    Hung-Yu Lai

    2013-10-01

    Full Text Available The accumulation of heavy metals, especially cadmium (Cd, in leafy vegetables was compared with other vegetables. Pak choi (Brassica campestris L. ssp. chinensis is a leafy vegetable consumed in Taiwan and its safety for consumption after growing in contaminated soils is a public concern. A pot experiment (50 days was conducted to understand the dynamic accumulation of Cd by pak choi grown in artificially contaminated soils. The edible parts of pak choi were sampled and analyzed every 2–3 days. The dry weight (DW of pak choi was an exponential function of leaf length, leaf width, and chlorophyll content. The accumulation of Cd increased when the soil Cd concentration was raised, but was kept at a constant level during different growth stages. Pak choi had a high bioconcentration factor (BCF = ratio of the concentration in the edible parts to that in the soils, at values of 3.5–4.0. The consumption of pak choi grown in soils contaminated at levels used in this study would result in the ingestion of impermissible amounts of Cd and could possibly have harmful effects on health.

  12. Impedance characterization of PV modules in outdoor conditions

    DEFF Research Database (Denmark)

    Oprea, Matei-lon; Spataru, Sergiu; Sera, Dezso;

    2016-01-01

    Impedance spectroscopy (IS) has been used for laboratory characterizations of photovoltaic (PV) technologies under well controlled conditions. This work applies IS for outdoor characterization of PV panels, in order to observe the effect of irradiance (G) and temperature (T) on the PV module’s...... impedance spectrum, and further construct an impedance model that can link environmental changes to the model’s parameters. To achieve this, an optimized setup has been developed for long-term impedance spectra monitoring synchronised with accurate irradiance and temperature data. Preliminary results show...

  13. Design of a Solar Tracker System for PV Power Plants

    Directory of Open Access Journals (Sweden)

    Tiberiu Tudorache

    2010-04-01

    Full Text Available This paper deals with the design and execution of a solar tracker systemdedicated to the PV conversion panels. The proposed single axis solar tracker deviceensures the optimization of the conversion of solar energy into electricity by properlyorienting the PV panel in accordance with the real position of the sun. The operation of theexperimental model of the device is based on a DC motor intelligently controlled by adedicated drive unit that moves a mini PV panel according to the signals received from twosimple but efficient light sensors. The performance and characteristics of the solar trackerare experimentally analyzed.

  14. PV Project Finance in the United States, 2016

    Energy Technology Data Exchange (ETDEWEB)

    Feldman, David; Lowder, Travis; Schwabe, Paul

    2016-09-01

    This brief is a compilation of data points and market insights that reflect the state of the project finance market for solar photovoltaic (PV) assets in the United States as of the third quarter of 2016. This information can generally be used as a simplified benchmark of the costs associated with securing financing for solar PV as well as the cost of the financing itself (i.e., the cost of capital). Three sources of capital are considered -- tax equity, sponsor equity, and debt -- across three segments of the PV marketplace.

  15. Recent developments in ASSERT-PV code for subchannel thermalhydraulics

    International Nuclear Information System (INIS)

    This paper summarises recent development of ASSERT-PV, and provides examples of applications to CANDU fuel bundles in predicting flow, heat transfer and sheath temperatures. The development work is intended to improve computational and phenomenological modelling capabilities of ASSERT-PV in simulating various flow scenarios in CANDU fuel bundles. The latest version of ASSERT-PV can be used for simulations of steady state or transient, subchannel thermalhydraulics in CANDU bundles under conditions up to and including post-dryout heat transfer. (author)

  16. What's stopping a huge expansion of the PV market?

    International Nuclear Information System (INIS)

    Over the past 25 years the terrestrial PV industry has turned into a billion-dollar global business. The necessary technology is available and substantial market growth is continuing. It has often been said that the cost of PV must come down further before the technology really takes off. However the author argues here that the dominant segments of the market are not price-sensitive and that the future explosive expansion of PV markets will need financing on a global basis, assured quality in the products, and the institution of an extensive public-awareness programme of advertising, promotion and education. (author)

  17. PV Validation and Bankability Workshop: San Jose, California

    Energy Technology Data Exchange (ETDEWEB)

    Granata, J.; Howard, J.

    2011-12-01

    This report is a collaboration between Sandia National Laboratories, the National Renewable Energy Laboratory, and the Florida Solar Energy Center (FSEC). The report provides feedback from the U.S. Department of Energy's (DOE) Solar Program PV Validation and Bankability Workshop in San Jose, California on August 31, 2011. It focuses on the current state of PV in the United States, private funding to fund U.S. PV industry growth, roles and functions of the regional test center program, and ways to improve the current validation and bankability practices.

  18. Molecular characterization of Pseudomonas syringae pv. tomato isolates from Tanzania

    DEFF Research Database (Denmark)

    Shenge, K.C.; Stephan, D.; Mabagala, R. B.;

    2008-01-01

    Bacterial speck caused by Pseudomonas syringae pv. tomato is an emerging disease of tomato in Tanzania. Following reports of outbreaks of the disease in many locations in Tanzania, 56 isolates of P. syringae pv. tomato were collected from four tomato- producing areas and characterized using....... syringae pv. tomato isolates in Tanzania that differ significantly from those used to create the Biolog database. RFLP analysis showed that the isolates were highly conserved in their hrpZ gene. The low level of genomic diversity within the pathogen in Tanzania shows that there is a possibility to use...

  19. Control of Single-Stage Single-Phase PV inverter

    DEFF Research Database (Denmark)

    Ciobotaru, Mihai; Teodorescu, Remus; Blaabjerg, Frede

    2005-01-01

    . The main elements of the PV control structure are: - a maximum power point tracker (MPPT) algorithm using the incremental conductance method; - a synchronization method using the phase-locked-loop (PLL), based on delay; - the input power control using the dc voltage controller and power feed......In this paper the issue of control strategies for single-stage photovoltaic (PV) inverter is addressed. Two different current controllers have been implemented and an experimental comparison between them has been made. A complete control structure for the single-phase PV system is also presented...

  20. The sol-ion system. A stationary PV battery system

    Energy Technology Data Exchange (ETDEWEB)

    Schmiegel, A.U.; Knaup, P.; Meissner, A. [voltwerk electronics GmbH, Hamburg (Germany); Jehoulet, C.; Schuh, H. [Saft Batteries, Bordeaux (France); Landau, M.; Braun, M. [Fraunhofer Institut fuer Windenergie und Energiesystemtechnik (IWES), Kassel (Germany); Sauer, D.U.; Magnor, D. [RWTH Aachen (Germany). ISEA; Mohring, H.D. [ZSW, Stuttgart (Germany)

    2010-07-01

    Stationary PV battery systems will play a more important role in future PV applications. They are able to support the grid by providing active and reactive power that can be stored and they can be used to increase the self-consumption of solar energy. The Sol-ion system is a PV battery system that utilises two different approaches for self-consumption - either disconnected from or connected to the grid. Instead of traditional lead-acid batteries, this system uses lithium-ion batteries to store solar power more efficiently. (orig.)

  1. Typical types and capacities of storages for PV applications; Typische Speichergroessen und -typen fuer PV-Anwendungen

    Energy Technology Data Exchange (ETDEWEB)

    Moehrstedt, U. [IBC Solartechnik, Staffelstein (Germany)

    1997-02-01

    Lead batteries used in PV plants can be classified into three groups: group A) are for standard PV plants in the range from 100 - 600 Wp 12V/24V/36V/48V for (a) leisure, hobby, technical applications; (b) pure PV plants or (c) PV and small-scale aerogenerators. Battery type Moll Solar 12 V 60 Ah - 200 Ah 6 V 240 Ah. Batteries of this type are largely maintenance-free due to their special cover design; also available with flashback protection. Group B) larger PV plants in the range from 500 Wp up to several kW as (d) pure PV plants; (e) hybrid plants (PV/diesel or PV plus small-scale aerogenerator. Battery type IBC OPzS Solar. Batteries of this category are based on the well-known OPzS series and are intended for stationary operation and have tubes at the positive plate and a pasted negative plate. Group C) the same as b), except that these batteries are maintenance-free; example: Sonnenschein A600 Solar. Maintenance is an important point in groups A) and B), and more so in the latter. These are high-grade batteries. They pose absolutely no problems, neither in terms of the different operating modes occuring in PV applications nor with regard to the charging method - provided they are treated properly. Future development work should be dedicated to further improving Group A) batteries in terms of universal, trouble-free use, including applications in the Third World. [German] Bei den in PV-Anlagen eingesetzten Bleibatterien kann man 3 Gruppen unterscheiden: GRUPPE (A) Standard-PV-Anlagen im Bereich 100-600 Wp 12V/24V/36V/48V fuer (a) Freizeit, Hobby, Technik (b) reine PV-Anlagen oder (c) PV- und Kleinwindanlagen. Batterie: Moll Solar 12 V 60 Ah-200 Ah 6 V 240 Ah. Batterien dieser Baureihe sind weitgehend wartungsfrei durch besondere Deckelkonstruktion, auch mit Rueckzuendschutz. GRUPPE (B) groessere PV-Anlagen im Bereich von 500 Wp bis zu mehreren kW (d) als reine PV-Anlage oder (e) als Hybrid-Anlage (PV-Diesel oder PV+kleiner Windgenerator). Batterie: IBC OPz

  2. A system for optimization working parameters of PV-modules and PV-generators at high environmental temperature

    International Nuclear Information System (INIS)

    Installing PV-modules and PV generators in some cases suffers from the lack of possibilities for choosing suitable platforms for situating them due to various architectural and constructive limitations. Therefore these modules and generators are often mounted on dark surfaces. As a consequence, their working temperature rises, which leads to lowing their coefficient of efficiency. This paper suggests a system for automatic temperature control and regulation for PV-modules and generators, which aims at optimization of their operation and efficiency. There are some experimental results shown in the paper, illustrating the efficiency of the system. (author)

  3. Evaluation of PV Module Field Performance

    Energy Technology Data Exchange (ETDEWEB)

    Wohlgemuth, John; Silverman, Timothy; Miller, David C.; McNutt, Peter; Kempe, Michael; Deceglie, Michael

    2015-06-14

    This paper describes an effort to inspect and evaluate PV modules in order to determine what failure or degradation modes are occurring in field installations. This paper will report on the results of six site visits, including the Sacramento Municipal Utility District (SMUD) Hedge Array, Tucson Electric Power (TEP) Springerville, Central Florida Utility, Florida Solar Energy Center (FSEC), the TEP Solar Test Yard, and University of Toledo installations. The effort here makes use of a recently developed field inspection data collection protocol, and the results were input into a corresponding database. The results of this work have also been used to develop a draft of the IEC standard for climate and application specific accelerated stress testing beyond module qualification. TEP Solar Test Yard, and University of Toledo installations. The effort here makes use of a recently developed field inspection data collection protocol, and the results were input into a corresponding database. The results of this work have also been used to develop a draft of the IEC standard for climate and application specific accelerated stress testing beyond module qualification. TEP Solar Test Yard, and University of Toledo installations. The effort here makes use of a recently developed field inspection data collection protocol, and the results were input into a corresponding database. The results of this work have also been used to develop a draft of the IEC standard for climate and application specific accelerated stress testing beyond module qualification.

  4. Promotional drivers for grid-connected PV

    Energy Technology Data Exchange (ETDEWEB)

    Lopez Polo, A.; Hass, R.; Suna, D.

    2009-03-15

    This report for the International Energy Agency (IEA) made by Task 10 of the Photovoltaic Power Systems (PVPS) programme takes a look at promotional measures for grid-connected photovoltaic systems. The mission of the Photovoltaic Power Systems Programme is to enhance the international collaboration efforts which accelerate the development and deployment of photovoltaic solar energy. The objective of Task 10 is stated as being to enhance the opportunities for wide-scale, solution-oriented application of photovoltaics in the urban environment. The paper discusses the core objective of this study which was to analyse the success of various governmental regulatory programs and governmental and non-governmental marketing programs for grid-connected PV systems. To meet this objective, a review of the most important past and current programs around the world was conducted. The theoretical bases of supply and demand are explained and the types of existing strategies are documented in a second Section. In Chapter 3, various programs around the world are described. Chapter 4 focuses on defining success criteria which will be used for the analysis of the programs. Finally, the major conclusions drawn complete this analysis.

  5. The Ramakrishna Mission economic PV development initiative

    Energy Technology Data Exchange (ETDEWEB)

    Stone, J.L.; Ullal, H.S. [National Renewable Energy Lab., Golden, CO (United States); Sherring, C. [Sherring Energy Associates, Princeton, NJ (United States)

    1998-09-01

    India is the world`s second most populous country, quickly approaching one billion persons. Although it has a well-developed electricity grid, many of the people have little or no access to electricity and all of the benefits associated with it. There are areas that are isolated from the grid and will not be connected for many years, if ever. One such area is the Sundarbans located in the delta region of the two great rivers, the Ganges and Brahmaputra, partially in India and partially in Bangladesh. It is estimated that 1.5 million people live in this area, crisscrossed by many islands and rivers, who have only marginal supplies of electricity generated primarily from diesel generators and batteries. Working with the regional non-governmental organization (NGO), the Ramakrishna Mission, and the West Bengal Renewable Energy Development Agency, the governments of India and the US initiated a rural electrification initiative to demonstrate the economic and technical feasibility of photovoltaics to provide limited supplies of electricity for such applications as solar home lighting systems (SHS), water pumping, vaccine refrigeration, communications, and economic development activities. This paper details initial results from approximately 30 kilowatts of PV systems installed in the area, including socio-economic impacts and technical performance.

  6. Races and hosts of Pseudomonas syringae pv. tomato in Serbia

    Directory of Open Access Journals (Sweden)

    Milijašević Svetlana

    2009-01-01

    Full Text Available During the past few years, frequent appearance of bacterial speck of tomatoes was recorded in several tomato-growing regions in Serbia. A three-year survey of tomato fields in Serbia (2002-2004 resulted in the isolation of numerous bacterial strains, with 30 representative strains selected for further analyses. Based on the results of pathogenicity, biochemical, and physiological tests, all strains isolated from diseased tomato plants were identified as P. syringae pv. tomato. The identity of strains was confirmed by the polymerase chain reaction (PCR, since PCR products of expected size (650 bp specific for coronatine-producing strains of P. syringae pv. tomato were amplified from all tested strains. Study of the host range of P. syringae pv. tomato strains originating from Serbia confirmed tomato as the sole host. The reaction of tomato differential cultivar Ontario 7710 showed that the Serbian strains belonged to races 0 and 1 of P. syringae pv. tomato.

  7. New test and characterization methods for PV modules and cells

    Energy Technology Data Exchange (ETDEWEB)

    Van Aken, B.; Sommeling, P. [ECN Solar Energy, Petten (Netherlands); Scholten, H. [Solland, Heerlen (Netherlands); Muller, J. [Moser-Baer, Eindhoven (Netherlands); Grossiord, N. [Holst Centre, Eindhoven (Netherlands); Smits, C.; Blanco Mantecon, M. [Holland Innovative, Eindhoven (Netherlands); Verheijen, M.; Van Berkum, J. [Philips Innovation Services, Eindhoven (Netherlands)

    2012-08-15

    The results of the project geZONd (shared facility for solar module analysis and reliability testing) are described. The project was set up by Philips, ECN, Holst, Solland, OM and T and Holland Innovative. The partners have shared most of their testing and analysis equipment for PV modules and cells, and together developed new or improved methods (including the necessary application know-how). This enables faster and more efficient innovation projects for each partner, and via commercial exploitation for other interested parties. The project has concentrated on five failure modes: corrosion, delamination, moisture ingress, UV irradiation, and mechanical bending. Test samples represented all main PV technologies: wafer based PV and rigid and flexible thin-film PV. Breakthroughs are in very early detection of corrosion, in quantitative characterization of adhesion, in-situ detection of humidity and oxygen inside modules, and ultra-fast screening of materials on UV stability.

  8. PV GRID Advisory Paper. Consultation version: key recommendations

    Energy Technology Data Exchange (ETDEWEB)

    Barth, Bianca; Concas, Giorgia; Cossent, Rafael; Franz, Oliver; Frias, Pablo; Hermes, Roland; Lama, Riccardo; Loew, Holger; Mateo, Carlos; Rekinger, Manoel; Sonvilla, Paolo Michele; Vandenbergh, Michel

    2014-01-15

    PV GRID is a transnational collaborative effort under the umbrella of the Intelligent Energy Europe programme. The main project goal is to enhance photovoltaic (PV) hosting capacity in distribution grids while overcoming regulatory and normative barriers hampering the application of available technical solutions. The European PV GRID advisory paper aims at providing an overview of the issues and barriers that need to be addressed in order to enhance the distribution grid hosting capacity for PV and other distributed generation (DG).To this purpose, barriers are classified as either cross-cutting challenges or specific barriers, depending on whether they have an overarching, system-wide character or rather focus on one single issue such as curtailment, self-consumption or storage. Finally, a set of preliminary recommendations on how to overcome these issues is presented, allowing for the implementation of the identified technical solutions.

  9. Power Electronic System for Multi-MW PV sites

    DEFF Research Database (Denmark)

    Paasch, Kasper

    2016-01-01

    The work presented in this thesis addresses the optimization potential of large PV power plants with respect to energy production during periods of moving clouds. Presently the number and size of utility scale Photo Voltaic (PV) power plants in the megawatt range is increasing and the market...... for solar inverters is under a severe pressure regarding cost reduction. The main topic of this thesis is the investigation of the potential advantage of applying string inverters with multiple Maximum-Power-Point-trackers (MPPT) in large PV plants compared to the use of one large central inverter with one...... a distance of 160 m. In parallel a string based inverter configuration was established with solar panels at the same locations. An analysis of irradiation data recorded during the test period showed that non-uniform irradiance due to moving clouds is expected to influence the PV plants for less than 4...

  10. Towards a PV-θ view of the general circulation

    Science.gov (United States)

    Hoskins, Brian J.

    1991-09-01

    In recent years, there has been a resurgence of interest in using isentropic coordinates and Rossby-Ertel potential vorticity (PV) for diagnosing the behaviour of middle latitude synoptic systems. Such a PV-θ analysis may also prove important in providing insight into the global circulation of the atmosphere. Apart from the isentropic diagnostic of D. Johnson and collaborators, some quasi-geostrophic studies and recent studies of stratospheric behaviour, there has been little work in this area and our present understanding is very limited. The object of the present paper is to stimulate such studies by presenting some initial results from continuing research. A three-fold division of the atmosphere is discussed. The "Overworld" is the region encompassed by isentropic surfaces that are everywhere above the tropopause. In the "Middleworld", the region with isentropes crossing the tropopause but not striking the Earth's surface, the isentropic zonal and time mean of PV exhibits interesting regions of enhanced and diminished gradients. The isentropic transient eddy advection of PV exhibits a dipolar distribution about the tropopause, suggestive of PV mixing. The marked PV signature of the Asian summer monsoon on one particular Middleworld isentrope is shown and the mean isentropic advection of PV shows interesting features. For the "Underworld", in which isentropic surfaces intercept the surface of the Earth, a PV-θ analysis yields a novel constraint linking low-level drag and diabatic heating. This constraint links "westerlies" and "cooling", and "easterlies" and "heating" in some average sense. The result is discussed in terms of the Southern Hemisphere strong surface westerlies and the circulation associated with the Asian summer and winter monsoons.

  11. Microgrid-Ready Solar PV; NREL (National Renewable Energy Laboratory)

    Energy Technology Data Exchange (ETDEWEB)

    None

    2015-07-01

    Designing new solar projects to be 'microgrid-ready' enables the U.S. DoD, other federal agencies, and the private sector to plan future microgrid initiatives to utilize solar PV as a generating resource. This fact sheet provides background information with suggested language for several up-front considerations that can be added to a solar project procurement or request for proposal (RFP) that will help ensure that PV systems are built for future microgrid connection.

  12. Economic and policy analysis for solar PV systems in Indiana

    International Nuclear Information System (INIS)

    In recent years, the energy market in the US and globally is expanding the production of renewable energy. Solar energy for electricity is also expanding in the US. Indiana is one of the states expanding solar energy with solar photovoltaic (PV) systems. Therefore, we conduct benefit cost analysis with several uncertain input variables to determine the economics of adopting solar PV systems in Indiana based on policy instruments that could increase adoption of solar PV systems. The specific objectives are analyses of the cost distribution of solar PV systems compared with grid electricity in homes and estimating the probability that solar can be cheaper than electricity from grids under different policy combinations. We first do the analysis under current policy and then the analysis under potential policy options for a variety of scenarios. Also, the results inform government policy makers on how effective the alternative policies for encouraging solar PV systems are. The results show that current policies are important in reducing the cost of solar PV systems. However, with current policies, there is only 50–50 chance of solar being cheaper than electricity from grids. If potential policies are implemented, solar PV systems can be more economical than grid electricity. - Highlights: • We investigate the economics of solar PV systems based on policy instruments. • We do scenario analyses under different combinations of policies. • We examine the probability of solar being cheaper than grid electricity for each scenario. • With current policies, there is 50–50 chance of solar being cheaper than the grid. • With depreciation and carbon tax, solar is much more economical than the grid

  13. Control and operation of SMES and SMES/PV systems

    OpenAIRE

    Foreman, Mark McKinney

    1992-01-01

    Applications, converter topologies, and control schemes are examined for superconductive magnetic energy storage (SMES) systems. Diurnal load leveling for electric utilities and compensation for fluctuations in photovoltaic (PV) power generation are the primary applications discussed. It is demonstrated that a SMES system implemented with standard AC/DC converters offers energy storage capacity large enough, and dynamic response fast enough, to compensate for PV fluctuat...

  14. PV Derived Data for Predicting Performance; NREL (National Renewable Energy Laboratory)

    Energy Technology Data Exchange (ETDEWEB)

    Marion, Bill

    2015-09-14

    A method is described for providing solar irradiance data for modeling PV performance by using measured PV performance data and back-solving for the unknown direct normal irradiance (DNI) and diffuse horizontal irradiance (DHI), which can then be used to model the performance of PV systems of any size, PV array tilt, or PV array azimuth orientation. Ideally situated for using the performance data from PV modules with micro-inverters, the PV module operating current is used to determine the global tilted irradiance (GTI), and a separation model is then used to determine the DNI and DHI from the GTI.

  15. Residential Solar PV Systems in the Carolinas: Opportunities and Outcomes.

    Science.gov (United States)

    Alqahtani, Bandar Jubran; Holt, Kyra Moore; Patiño-Echeverri, Dalia; Pratson, Lincoln

    2016-02-16

    This paper presents a first-order analysis of the feasibility and technical, environmental, and economic effects of large levels of solar photovoltaic (PV) penetration within the services areas of the Duke Energy Carolinas (DEC) and Duke Energy Progress (DEP). A PV production model based on household density and a gridded hourly global horizontal irradiance data set simulates hourly PV power output from roof-top installations, while a unit commitment and real-time economic dispatch (UC-ED) model simulates hourly system operations. We find that the large generating capacity of base-load nuclear power plants (NPPs) without ramping capability in the region limits PV integration levels to 5.3% (6510 MW) of 2015 generation. Enabling ramping capability for NPPs would raise the limit of PV penetration to near 9% of electricity generated. If the planned retirement of coal-fired power plants together with new installations and upgrades of natural gas and nuclear plants materialize in 2025, and if NPPs operate flexibly, then the share of coal-fired electricity will be reduced from 37% to 22%. A 9% penetration of electricity from PV would further reduce the share of coal-fired electricity by 4-6% resulting in a system-wide CO2 emissions rate of 0.33 to 0.40 tons/MWh and associated abatement costs of 225-415 (2015$ per ton). PMID:26745347

  16. Review of PV Inverter Technology Cost and Performance Projections

    Energy Technology Data Exchange (ETDEWEB)

    Navigant Consulting Inc.

    2006-01-01

    The National Renewable Energy Laboratory (NREL) has a major responsibility in the implementation of the U.S. Department of Energy's (DOE's) Solar Energy Technologies Program. Sandia National Laboratories (SNL) has a major role in supporting inverter development, characterization, standards, certifications, and verifications. The Solar Energy Technologies Program recently published a Multiyear Technical Plan, which establishes a goal of reducing the Levelized Energy Cost (LEC) for photovoltaic (PV) systems to $0.06/kWh by 2020. The Multiyear Technical Plan estimates that, in order to meet the PV system goal, PV inverter prices will need to decline to $0.25-0.30 Wp by 2020. DOE determined the need to conduct a rigorous review of the PV Program's technical and economic targets, including the target set for PV inverters. NREL requested that Navigant Consulting Inc.(NCI) conduct a review of historical and projected cost and performance improvements for PV inverters, including identification of critical barriers identified and the approaches government might use to address them.

  17. Performance evaluation of stand alone hybrid PV-wind generator

    Energy Technology Data Exchange (ETDEWEB)

    Nasir, M. N. M.; Saharuddin, N. Z.; Sulaima, M. F.; Jali, Mohd Hafiz; Bukhari, W. M.; Bohari, Z. H. [Faculty of Electrical Engineering, Universiti Teknikal Malaysia Melaka (UTeM), Hang Tuah Jaya, 76100 Melaka (Malaysia); Yahaya, M. S. [Faculty of Engineering Technology, Universiti Teknikal Malaysia Melaka (UTeM), Hang Tuah Jaya, 76100 Melaka (Malaysia)

    2015-05-15

    This paper presents the performance evaluation of standalone hybrid system on Photovoltaic (PV)-Wind generator at Faculty of Electrical Engineering (FKE), UTeM. The hybrid PV-Wind in UTeM system is combining wind turbine system with the solar system and the energy capacity of this hybrid system can generate up to charge the battery and supply the LED street lighting load. The purpose of this project is to evaluate the performance of PV-Wind hybrid generator. Solar radiation meter has been used to measure the solar radiation and anemometer has been used to measure the wind speed. The effectiveness of the PV-Wind system is based on the various data that has been collected and compared between them. The result shows that hybrid system has greater reliability. Based on the solar result, the correlation coefficient shows strong relationship between the two variables of radiation and current. The reading output current followed by fluctuate of solar radiation. However, the correlation coefficient is shows moderate relationship between the two variables of wind speed and voltage. Hence, the wind turbine system in FKE show does not operate consistently to produce energy source for this hybrid system compare to PV system. When the wind system does not fully operate due to inconsistent energy source, the other system which is PV will operate and supply the load for equilibrate the extra load demand.

  18. Continuing Developments in PV Risk Management: Strategies, Solutions, and Implications

    Energy Technology Data Exchange (ETDEWEB)

    Lowder, T.; Mendelsohn, M.; Speer, B.; Hill, R.

    2013-02-01

    As the PV industry matures, successful risk management practices will become more imperative to ensure investor confidence, control costs, and facilitate further growth. This report discusses several key aspects of risk management during the commercial- and utility-scale project life cycle, from identification of risks, to the process of mitigating and allocating those risks among project parties, to transferring those risks through insurance. The report also explores novel techniques in PV risk management, options to offload risks onto the capital markets, and innovative insurance policies (namely warranty policies) that address risks unique to the PV sector. One of the major justifications for robust risk management in the PV industry is the cost-reduction opportunities it affords. If the PV industry can demonstrate the capability to successfully manage its risks, thereby inspiring confidence in financiers, it may be able to obtain a lower cost of capital in future transactions. A lower cost of capital translates to a lower cost of energy, which will in turn enhance PV?s competitiveness at a time when it will have to rely less on subsidies to support its market penetration.

  19. Control Strategies for the DAB Based PV Interface System.

    Science.gov (United States)

    El-Helw, Hadi M; Al-Hasheem, Mohamed; Marei, Mostafa I

    2016-01-01

    This paper presents an interface system based on the Dual Active Bridge (DAB) converter for Photovoltaic (PV) arrays. Two control strategies are proposed for the DAB converter to harvest the maximum power from the PV array. The first strategy is based on a simple PI controller to regulate the terminal PV voltage through the phase shift angle of the DAB converter. The Perturb and Observe (P&O) Maximum Power Point Tracking (MPPT) technique is utilized to set the reference of the PV terminal voltage. The second strategy presented in this paper employs the Artificial Neural Network (ANN) to directly set the phase shift angle of the DAB converter that results in harvesting maximum power. This feed-forward strategy overcomes the stability issues of the feedback strategy. The proposed PV interface systems are modeled and simulated using MATLAB/SIMULINK and the EMTDC/PSCAD software packages. The simulation results reveal accurate and fast response of the proposed systems. The dynamic performance of the proposed feed-forward strategy outdoes that of the feedback strategy in terms of accuracy and response time. Moreover, an experimental prototype is built to test and validate the proposed PV interface system. PMID:27560138

  20. Battery Energy Storage System for PV Output Power Leveling

    Directory of Open Access Journals (Sweden)

    Rajkiran Singh

    2014-01-01

    Full Text Available Fluctuating photovoltaic (PV output power reduces the reliability in power system when there is a massive penetration of PV generators. Energy storage systems that are connected to the PV generators using bidirectional isolated dc-dc converter can be utilized for compensating the fluctuating PV power. This paper presents a grid connected energy storage system based on a 2 kW full-bridge bidirectional isolated dc-dc converter and a PWM converter for PV output power leveling. This paper proposes two controllers: a current controller using the d-q synchronous reference and a phase-shift controller. The main function of the current controller is to regulate the voltage at the high-side dc, so that the voltage ratio of the high-voltage side (HVS with low-voltage side (LVS is equal to the transformer turns ratio. The phase-shift controller is employed to manage the charging and discharging modes of the battery based on PV output power and battery voltage. With the proposed system, unity power factor and efficient active power injection are achieved. The feasibility of the proposed control system is investigated using PSCAD simulation.

  1. Training and certification of PV installers in Europe

    International Nuclear Information System (INIS)

    The European strategy for the coming decades sets specific targets for a sustainable growth, including reaching a 20% share of renewables in final energy consumption till 2020. To achieve this target, a number of initiatives and measures have been in force. Europe, is currently the largest market for PV systems with more than 75% of the annual worldwide installations in 2011. The favourable European policies as well as the Member States’ supporting legislations have resulted in high market growth for photovoltaics. Applying PV technologies however, requires high qualified technicians to install, repair and maintain them. Until today, national markets have been growing faster than the skilled PV installers force can satisfy. The PVTRIN, an Intelligent Energy Europe action, addresses these issues by developing a training and certification scheme for technicians active in the installation and maintenance of small scale PV systems. During the implementation of the action, a market research was conducted in the six participating countries in order to record the stakeholders’ attitudes, perceptions and considerations and to adapt the training methods, tools and materials to the national PV industry requirements and markets’ needs. Indicative results of this analysis as well as the current situation regarding relevant training and certification schemes are presented in this paper. - Highlights: ► Market research in six EU countries on PV professional Training and Certification needs. ► PVTRIN scheme integrates the national legislations and the market's needs. ► The different aspects (technical, institutional, financial) are presented

  2. Residential Solar PV Systems in the Carolinas: Opportunities and Outcomes.

    Science.gov (United States)

    Alqahtani, Bandar Jubran; Holt, Kyra Moore; Patiño-Echeverri, Dalia; Pratson, Lincoln

    2016-02-16

    This paper presents a first-order analysis of the feasibility and technical, environmental, and economic effects of large levels of solar photovoltaic (PV) penetration within the services areas of the Duke Energy Carolinas (DEC) and Duke Energy Progress (DEP). A PV production model based on household density and a gridded hourly global horizontal irradiance data set simulates hourly PV power output from roof-top installations, while a unit commitment and real-time economic dispatch (UC-ED) model simulates hourly system operations. We find that the large generating capacity of base-load nuclear power plants (NPPs) without ramping capability in the region limits PV integration levels to 5.3% (6510 MW) of 2015 generation. Enabling ramping capability for NPPs would raise the limit of PV penetration to near 9% of electricity generated. If the planned retirement of coal-fired power plants together with new installations and upgrades of natural gas and nuclear plants materialize in 2025, and if NPPs operate flexibly, then the share of coal-fired electricity will be reduced from 37% to 22%. A 9% penetration of electricity from PV would further reduce the share of coal-fired electricity by 4-6% resulting in a system-wide CO2 emissions rate of 0.33 to 0.40 tons/MWh and associated abatement costs of 225-415 (2015$ per ton).

  3. Control Strategies for the DAB Based PV Interface System

    Science.gov (United States)

    El-Helw, Hadi M.; Al-Hasheem, Mohamed; Marei, Mostafa I.

    2016-01-01

    This paper presents an interface system based on the Dual Active Bridge (DAB) converter for Photovoltaic (PV) arrays. Two control strategies are proposed for the DAB converter to harvest the maximum power from the PV array. The first strategy is based on a simple PI controller to regulate the terminal PV voltage through the phase shift angle of the DAB converter. The Perturb and Observe (P&O) Maximum Power Point Tracking (MPPT) technique is utilized to set the reference of the PV terminal voltage. The second strategy presented in this paper employs the Artificial Neural Network (ANN) to directly set the phase shift angle of the DAB converter that results in harvesting maximum power. This feed-forward strategy overcomes the stability issues of the feedback strategy. The proposed PV interface systems are modeled and simulated using MATLAB/SIMULINK and the EMTDC/PSCAD software packages. The simulation results reveal accurate and fast response of the proposed systems. The dynamic performance of the proposed feed-forward strategy outdoes that of the feedback strategy in terms of accuracy and response time. Moreover, an experimental prototype is built to test and validate the proposed PV interface system. PMID:27560138

  4. Examples of successful architectural integration of PV: Germany

    International Nuclear Information System (INIS)

    In Germany building-integrated photovoltaics (BIPV) are developing rapidly, and much progress has been achieved in the past five years. BIPV can be used today in different ways on both existing and new buildings. Architects and designers are discovering BIPV. With the help of custom-made products available on the German market they are beginning to explore the technical limits of an aesthetic and structural integration of PV in buildings. As a result some exciting high-profile building projects with PV have been built, for example, the small service pavilion Meereslauschen in Steinhude or the new headquarters building of the Wood Trade Association in Munich. These projects show that the use of PV is very varied and offers opportunities for creative architects. However non-technical problems still need to be solved to allow a meaningful and widespread application of PV in the built environment. To decrease costs it is essential to develop further standard BIPV components. The aim of such developments should be to replace standard PV modules by products in which PV and structural building elements are melded into one design and structural unit. (author)

  5. Integrating High Penetrations of PV into Southern California

    Energy Technology Data Exchange (ETDEWEB)

    Kroposki, B.; Mather, B.; Hasper-Tuttle, J.; Neal, R.; Katiraei, F.; Yazdani, A.; Aguero, J. R.; Hoff, T. E.; Norris, B. L.; Parkins, A.; Seguin, R.; Schauder, C.

    2011-01-01

    California regulators recently approved a plan proposed by Southern California Edison (SCE) to install 500 MW of distributed photovoltaic (PV) energy in its utility service territory over the next 5 years. The installations will include 250 MW of utility-owned solar and 250 MW of independently owned solar. SCE expects that the majority of these systems will be commercial-scale rooftop PV systems connected at various points in the distribution system. Each of the SCE rooftop PV systems will typically have a rating of 1-3 MW. To understand the impact of high-penetration PV on the distribution grid, the National Renewable Energy Laboratory (NREL) and SCE brought together a team of experts in resource assessment, distribution modeling, and planning to help analyze the impacts of adding high penetration of PV into the distribution system. Through modeling and simulation, laboratory testing, and field demonstrations, the team will address the issues identified in the analysis by fully examining the challenges, developing solutions, and transitioning those solutions to the field for large-scale deployment. This paper gives an update on the project and discusses technical results of integrating a large number of distributed PV systems into the grid.

  6. Review of Artificial Abrasion Test Methods for PV Module Technology

    Energy Technology Data Exchange (ETDEWEB)

    Miller, David C. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Muller, Matt T. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Simpson, Lin J. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-08-01

    This review is intended to identify the method or methods--and the basic details of those methods--that might be used to develop an artificial abrasion test. Methods used in the PV literature were compared with their closest implementation in existing standards. Also, meetings of the International PV Quality Assurance Task Force Task Group 12-3 (TG12-3, which is concerned with coated glass) were used to identify established test methods. Feedback from the group, which included many of the authors from the PV literature, included insights not explored within the literature itself. The combined experience and examples from the literature are intended to provide an assessment of the present industry practices and an informed path forward. Recommendations toward artificial abrasion test methods are then identified based on the experiences in the literature and feedback from the PV community. The review here is strictly focused on abrasion. Assessment methods, including optical performance (e.g., transmittance or reflectance), surface energy, and verification of chemical composition were not examined. Methods of artificially soiling PV modules or other specimens were not examined. The weathering of artificial or naturally soiled specimens (which may ultimately include combined temperature and humidity, thermal cycling and ultraviolet light) were also not examined. A sense of the purpose or application of an abrasion test method within the PV industry should, however, be evident from the literature.

  7. 双孢蘑菇和蘑菇的ITS-RFLP分析%Studies on Agaricus bisporus and Agaricus campestris Using ITS-RFLP

    Institute of Scientific and Technical Information of China (English)

    王波; 刘勇; 赵小青; 王一; 王泽生

    2012-01-01

    对采自四川和西藏的双孢蘑菇(Agaricus bisporus)和蘑菇(A.campestris)9个野生菌株,以及双孢蘑菇5个栽培菌株为材抖,进行了ITS-RFLP分析.结果表明,ITS-PCR条带约为750 bp,5种限制性内切酶(MspⅠ、HinfⅠ、HaeⅡ、AulⅠ、TaqⅠ)的ITS-RFLP分析结果为,只有4种限制性内切酶(HinfⅠ、HaeⅡ、AulⅠ、TaqⅠ)产生多态性条带,但完全能将双孢蘑菇和蘑菇区分的限制性内切酶为TaqⅠ;对5种限制性内切酶的ITS-RFLP分析数据进行聚类结果为,在相似系数为0.615水平以下分为2个类群,并将双孢蘑菇和蘑菇区分开;在相似系数为0.915水平上,供试的11个野生和栽培双孢蘑菇菌株分为3个亚类群.%14 Agaricus strains, including 9 wild strains of Agaricus bisporus or Agaricus campestris and 4 cultivation strains of Agaricus bisporus , were studied by using ITS-RFLP. The results showed that a band with 750 bp from the strains was respectively amplified by the primer combination of ITS4 and ITS5 , and polymorphic bands were obtained after digestive treatments with restriction enzymes of Hinf Ⅰ , Hae Ⅱ , Aul Ⅰ , Taq Ⅰ , but no polymorphic bands produced with Msp Ⅰ, and Agaricus bisporus strains could be distinguished from Agaricus campestris strains only using Taq Ⅰ . The cluster results indicated that strains of Agaricus bisporus and Agaricus campestris could be distinguished and divided into two groups at similarity coefficient of O.615, and the strains of Agaricus bisporus were divided into three subgroups at similarity coefficient of 0.915.

  8. Effects of Different Cadmium Levels on Active Oxygen Metabolism and H2O2-Scavenging System in Brassica campestris L.ssp.chinensis

    Institute of Scientific and Technical Information of China (English)

    SUN Guang-wen; ZHU Zhu-jun; FANG Xue-zhi

    2004-01-01

    The effects of different Cd (Cadmium) levels on generation of active oxygen speceies(AOS) and H2O2-scavenging system in the leaves of Brassica campestris L. ssp. chinensiswere studied. The results showed that O2 generation rate, and H2O2 content were enhancedand malondialdehyde (MDA) content increased with the increase of Cd concentrations inthe growth medium. The activities of ascorbate peroxidase (APX), dehydroascorbatereductase (DR) and glutathione reductase (GR) were promoted by the addition of Cd.Exposed to Cd also increased the contents of ascorbate (ASA) and glutathione (GSH) in theleaves.

  9. Role of nitrification inhibitor DMPP( 3,4-dimethylpyrazole phosphate) in NO3--N accumulation in greengrocery( Brassica campestris L. Ssp. Chinensis )and vegetable soil

    Institute of Scientific and Technical Information of China (English)

    XU Chao; WU Liang-huan; JU Xiao-tang; ZHANG Fu-suo

    2005-01-01

    The influence of nitrification inhibitor(NI) 3,4-dimethylpyrazole phosphate (DMPP) on nitrate accumulation in greengrocery( Brassica campestris L. ssp. chinensis) and vegetable soil at surface layer were investigated in field experiments in 2002 and 2003.Results showed that NI DMPP took no significant effect on yields of edible parts of greengrocery, but it could significantly decrease NO3- -N concentration in greengrccery and in vegetable soil at surface layer. In addition, NI DMPP could reduce the NO3--N concentration during the prophase stage of storage.

  10. Quantification des contraintes nutritionnelles et métaboliques associées à la production de gomme xanthane par Xanthomonas campestris

    OpenAIRE

    Létisse, Fabien

    2000-01-01

    La production industrielle de gomme xanthane, polysaccharide présentant des caractéristiques rhéologiques exceptionnelles, est réalisée en cultures discontinues aérobies de Xanthomonas campestris, Le travail présenté dans cette thèse évalue l'influence des paramètres environnementaux et physiologiques sur la biosynthèse de la gomme dans le cadre d'un procédé industriel. L'analyse macro-cinétique de la production de xanthane sur saccharose montre une phase de croissance rapide s...

  11. Proposal of Xanthomonas translucens pv. pistaciae pv. nov., pathogenic to pistachio (Pistacia vera).

    Science.gov (United States)

    Giblot-Ducray, Danièle; Marefat, Alireza; Gillings, Michael R; Parkinson, Neil M; Bowman, John P; Ophel-Keller, Kathy; Taylor, Cathy; Facelli, Evelina; Scott, Eileen S

    2009-12-01

    Strains of Xanthomonas translucens have caused dieback in the Australian pistachio industry for the last 15 years. Such pathogenicity to a dicotyledonous woody host contrasts with that of other pathovars of X. translucens, which are characterized by their pathogenicity to monocotyledonous plant families. Further investigations, using DNA-DNA hybridization, gyrB gene sequencing and integron screening, were conducted to confirm the taxonomic status of the X. translucens pathogenic to pistachio. DNA-DNA hybridization provided a clear classification, at the species level, of the pistachio pathogen as a X. translucens. In the gyrB-based phylogeny, strains of the pistachio pathogen clustered among the X. translucens pathovars as two distinct lineages. Integron screening revealed that the cassette arrays of strains of the pistachio pathogen were different from those of other Xanthomonas species, and again distinguished two groups. Together with previously reported pathogenicity data, these results confirm that the pistachio pathogen is a new pathovar of X. translucens and allow hypotheses about its origin. The proposed name is Xanthomonas translucens pv. pistaciae pv. nov.

  12. Proposal of Xanthomonas translucens pv. pistaciae pv. nov., pathogenic to pistachio (Pistacia vera).

    Science.gov (United States)

    Giblot-Ducray, Danièle; Marefat, Alireza; Gillings, Michael R; Parkinson, Neil M; Bowman, John P; Ophel-Keller, Kathy; Taylor, Cathy; Facelli, Evelina; Scott, Eileen S

    2009-12-01

    Strains of Xanthomonas translucens have caused dieback in the Australian pistachio industry for the last 15 years. Such pathogenicity to a dicotyledonous woody host contrasts with that of other pathovars of X. translucens, which are characterized by their pathogenicity to monocotyledonous plant families. Further investigations, using DNA-DNA hybridization, gyrB gene sequencing and integron screening, were conducted to confirm the taxonomic status of the X. translucens pathogenic to pistachio. DNA-DNA hybridization provided a clear classification, at the species level, of the pistachio pathogen as a X. translucens. In the gyrB-based phylogeny, strains of the pistachio pathogen clustered among the X. translucens pathovars as two distinct lineages. Integron screening revealed that the cassette arrays of strains of the pistachio pathogen were different from those of other Xanthomonas species, and again distinguished two groups. Together with previously reported pathogenicity data, these results confirm that the pistachio pathogen is a new pathovar of X. translucens and allow hypotheses about its origin. The proposed name is Xanthomonas translucens pv. pistaciae pv. nov. PMID:19748753

  13. Effect of the Fluctuations of PV Production and Electricity Demand on the PV Electricity Self-Consumption

    OpenAIRE

    Wyrsch, Nicolas; Riesen, Yannick; Ballif, Christophe

    2013-01-01

    The electricity self-consumption level of a family household is determined both experimentally and by modelling. The effect of rapid fluctuation in PV production and electricity demand, and especially the effect of the temporal resolution of their measurements, are studied. For accurate determination of the self-consumption level, temporal resolution of at least 30 s for the load profile and at least 10 min for the PV production measurements are suggested. The effect of temporal resolution be...

  14. Large scale PV plants - also in Denmark. Project report

    Energy Technology Data Exchange (ETDEWEB)

    Ahm, P. (PA Energy, Malling (Denmark)); Vedde, J. (SiCon. Silicon and PV consulting, Birkeroed (Denmark))

    2011-04-15

    Large scale PV (LPV) plants, plants with a capacity of more than 200 kW, has since 2007 constituted an increasing share of the global PV installations. In 2009 large scale PV plants with cumulative power more that 1,3 GWp were connected to the grid. The necessary design data for LPV plants in Denmark are available or can be found, although irradiance data could be improved. There seems to be very few institutional barriers for LPV projects, but as so far no real LPV projects have been processed, these findings have to be regarded as preliminary. The fast growing number of very large scale solar thermal plants for district heating applications supports these findings. It has further been investigated, how to optimize the lay-out of LPV plants. Under the Danish irradiance conditions with several winter months with very low solar height PV installations on flat surfaces will have to balance the requirements of physical space - and cost, and the loss of electricity production due to shadowing effects. The potential for LPV plants in Denmark are found in three main categories: PV installations on flat roof of large commercial buildings, PV installations on other large scale infrastructure such as noise barriers and ground mounted PV installations. The technical potential for all three categories is found to be significant and in the range of 50 - 250 km2. In terms of energy harvest PV plants will under Danish conditions exhibit an overall efficiency of about 10 % in conversion of the energy content of the light compared to about 0,3 % for biomass. The theoretical ground area needed to produce the present annual electricity consumption of Denmark at 33-35 TWh is about 300 km2 The Danish grid codes and the electricity safety regulations mention very little about PV and nothing about LPV plants. It is expected that LPV plants will be treated similarly to big wind turbines. A number of LPV plant scenarios have been investigated in detail based on real commercial offers and

  15. PV-HYBRID and MINI-GRID. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    Within the 3rd European Conference at the Centre de Congres in Aix en Provence (France) between 11th and 12th May, 2006, the following lessons were held: (1) Small electric networks: European drivers and projects for the integration of RES and DG into the electricity grids of the future (Manuel Sanchez-Jimenez); (2) PV hybrid system within mini grids - IEA PVPS programme (Meuch Konraf); (3) Renewables for the developing world (Alvaro Ponce Plaza); (4) Rural electicity supply using photovoltaic / - Diesel hybrid systems: Attractive for investors in the renewable energy sector? (Andreas Hahn); (5) Economic analysis of stand-alone and grid-connected photovoltaic systems under current tariff structure of Taiwan (Yaw-Juen Wang); (6) Using wind-PV-diesel hybrid system for electrification of remote village in Western Libya (N.M. Kreama); (7) Venezuela's renewable energy program for small towns and rural areas ''Sembrando Luz'' (Jorge Torres); (8) AeroSmart5, the professional, sysem-compatible small-scale wind energy converter will be tested in field tests (Fabian Jochem); (9) Lifetime, test procedures and recommendations for optimal operating strategies for lead-acid-batteries in renewable energy systems - A survey on results from European projects from the 5th framework programme (Rudi Kaiser); (10) Prototype of a reversible fuel cell system for autonomous power supplies (Tom Smolinska); (11) Interconnection management in microgrids (Michel Vandenbergh); (12) Control strategy for a small-scale stand-alone power system based on renewable energy and hydrogen (Harald Miland); (13) Standard renewable electricity supply for people in rural areas - mini-grids in western provinces of China (Michael Wollny); (14) The Brava island a ''100% renewable energy'' project (Jean-Christian Marcel); (15) Breakthrough to a new era of PV-hybrid systems with the help of standardised components communication? (Michael Mueller); (16) Standardized

  16. Investigation of bias radiation effect on PV cell measurement

    Science.gov (United States)

    Huang, Xuebo; Quan, Chenggen; Chan, Joanne; Ng, Patrick

    2013-06-01

    Photovoltaic (PV) cells are photo-electrical devices that convert light energy directly into electricity through the photovoltaic effect. PV cell assemblies are used to make solar modules employed in a variety of ways ranging from space applications to domestic energy consumption. Characterisation and performance testing of PV cells are critical to the development of PV technologies and growth of the solar industry. As new solar products are being developed, its energy conversion efficiency and other critical parameters must be accurately measured and tested against globally recognised metrological standards. The differential spectral responsivity (DSR) measurement is one of the primary methods for calibrating reference PV cells. This is done by calculating its spectral responsivities through measuring the AC short-circuit current produced by a PV cell under a modulated monochromatic radiation and different levels of steady-state broadband bias light radiation. It is observed that different types of bias light source will produce different signal-to-noise levels and significantly influence measurement accuracy. This paper aims to investigate the noise sources caused by different types of bias light sources (e.g. xenon arc and tungsten-halogen lamps) and the relevant measurement uncertainties so as to propose a guideline for selection of bias light source which can improve the signal-to-noise level and measurement uncertainty. The DSRs of the PV cells are measured using a commercial DSR measurement system under different levels of bias radiation from 0 to 1 kWm-2. The data analysis and uncertainty evaluation are presented in this paper using experimental data and mathematical tools.

  17. PV-BUK: Operating and maintenance costs of photovoltaic installations; PV-BUK - Betriebs- und Unterhaltskosten von PV-Anlagen - Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Stettler, S.; Toggweiler, P. [Enecolo AG, Moenchaltorf (Switzerland); Ruoss, D.; Schudel, P. [Envision, Lucerne (Switzerland); Kottmann, A.; Steinle, F. [BE Netz AG, Lucerne (Switzerland)

    2008-03-15

    This final report elaborated for the Swiss Federal Office of Energy (SFOE) takes a look at the results of a project carried out to determine the costs for facility management, to estimate future cost development and to propose activities for the further reduction of the operation and maintenance costs of photovoltaic systems. Information on the cost situation was collected by literature study, as well as in interviews and surveys with photovoltaic (PV) experts and the owners of PV installations. The discussion of the results at a workshop with about 20 Swiss PV experts is noted. The results are presented and discussed. These show that operating costs per kWh decrease with the size of the PV system. Figures are quoted. The major part of the costs are quoted as being those for spare parts, especially for the inverter. The authors are of the opinion that, in future, costs for facility management will further decrease, as they are partly linked to capital and insurance costs. Potential for optimisation is said to exist in several areas of facility management such as, for example, in system monitoring and fast reaction in the case of malfunctions.

  18. Performance of a PV module augmented by a plane reflector

    Energy Technology Data Exchange (ETDEWEB)

    Ahmad, G. E; Hussein, H. M. S; Mohamad, M. A [Dokki, Giza (Egypt)

    2000-07-01

    This paper presents a comparative experimental study on the performance of a PV module augmented by a south facing titled plane reflector and another identical one without reflector. The tilt angles of the two PV modules and reflector overhang are selected to be according to a previous theoretical study by the authors. The reflector tilt angle has been changed once a month so that the reflected beams from the plane reflector cover the total surface area of the PV module all days of every month during the high solar radiation period (i.e. three hours before and after solar noon). The study has been carried out on the two PV modules for a complete year under the actual atmospheric conditions of Cairo, Egypt. The measuring system used in the study comprises a data acquisition system, a computer, an electronic load and weather station. The experimental results indicate that the plane reflector enhances the yearly output energy of the PV module y about 22%. [Spanish] Este articulo presenta un estudio comparativo experimental sobre el rendimiento de un modulo de PV aumentado por un reflector plano inclinado mirando hacia el sur y otro identico sin reflector. Los angulos de inclinacion de los dos modulos y el reflector sobresaliente se seleccionan para que esten de acuerdo con un estudio teorico previo hecho por los autores. El angulo de inclinacion del reflector se cambio una vez al mes de manera que los rayos reflejados por el reflector plano cubrieran el area total de la superficie del modulo de PV todos los dias de cada mes durante el periodo de radiacion alto (o sea tres horas antes y despues del medio dia solar). El estudio ha sido llevado a cabo en dos modulos de PV durante un ano completo bajo condiciones atmosfericas reales de El Cairo, Egipto. El sistema de medicion usado en el estudio comprende un sistema de adquisicion de datos, una computadora, una memoria electronica y una estacion climatologica. Los resultados experimentales indican que el reflector plano

  19. Policies and opportunities for grid parity of PV in the Netherlands

    Energy Technology Data Exchange (ETDEWEB)

    Lako, P.; Beurskens, L.W.M. [ECN Policy Studies, Petten (Netherlands)

    2012-01-15

    In 2010, ECN Policy Studies has provided information on the development of solar PV in the Netherlands to GlobalData, India. Based on this information request, the present note on policies and opportunities for grid parity of PV has been drafted. Recently, subsidies for solar PV in the Netherlands have shown a pattern of a roller-coaster that is typical for PV financing in a number of EU countries. Stop-and-go policies for solar PV may have multiple causes. It may be difficult to determine the right feed-in tariffs for PV; or governments may be reluctant to provide sufficient funding for a relatively expensive renewable electricity source like PV. This note sheds light on the current state of affairs and policies for PV in the Netherlands, and on several private initiatives aimed at reaching grid parity for PV which is installed by households.

  20. Durability Quality Research of Concrete Containing Solar PV Cells

    Directory of Open Access Journals (Sweden)

    Chao Sao-Jeng

    2015-01-01

    Full Text Available In this article we demonstrated the study results of durability quality of concrete containing waste solar PV cells. The study used alkali activator to improve the activity of alkali-activated materials in solar PV cells so as to replace Portland cement as binder in concrete. By using sodium hydroxide as an alkali-activator, a high-pH environment is generated to excite the binding characteristics of alkali-activated materials in solar PV cells, and thus develops better durability of the mixes. The conclusions were made on effect of this cement replacement. As a result, we identified the durability for those of 16 concrete specimens predefined and made to consider various possible control factors. The conclusions also depicted that all experiments but the drying shrinkage may be helpful with the suitable use of control factors as far as concerning the recycled solar PV cells for mixing in concrete. In other words, the durability quality of concrete may be partially unacceptable of containing solar PV cells.

  1. Solar cell junction temperature measurement of PV module

    KAUST Repository

    Huang, B.J.

    2011-02-01

    The present study develops a simple non-destructive method to measure the solar cell junction temperature of PV module. The PV module was put in the environmental chamber with precise temperature control to keep the solar PV module as well as the cell junction in thermal equilibrium with the chamber. The open-circuit voltage of PV module Voc is then measured using a short pulse of solar irradiation provided by a solar simulator. Repeating the measurements at different environment temperature (40-80°C) and solar irradiation S (200-1000W/m2), the correlation between the open-circuit voltage Voc, the junction temperature Tj, and solar irradiation S is derived.The fundamental correlation of the PV module is utilized for on-site monitoring of solar cell junction temperature using the measured Voc and S at a short time instant with open circuit. The junction temperature Tj is then determined using the measured S and Voc through the fundamental correlation. The outdoor test results show that the junction temperature measured using the present method, Tjo, is more accurate. The maximum error using the average surface temperature Tave as the junction temperature is 4.8 °C underestimation; while the maximum error using the present method is 1.3 °C underestimation. © 2010 Elsevier Ltd.

  2. Remote and Centralized Monitoring of PV Power Plants

    DEFF Research Database (Denmark)

    Kopacz, Csaba; Spataru, Sergiu; Sera, Dezso;

    2014-01-01

    This paper presents the concept and operating principles of a low-cost and flexible monitoring system for PV plants. Compared to classical solutions which can require dedicated hardware and/or specialized data logging systems, the monitoring system we propose allows parallel monitoring of PV plan...... the diagnostic and condition monitoring capabilities of the PV system can be greatly enhanced. The practical implementation and operation of the monitoring system is demonstrated with a study case system deployed at Aalborg University.......This paper presents the concept and operating principles of a low-cost and flexible monitoring system for PV plants. Compared to classical solutions which can require dedicated hardware and/or specialized data logging systems, the monitoring system we propose allows parallel monitoring of PV plants...... with different architectures and locations by taking advantage of the intrinsic monitoring capabilities of the inverters and their internet connectivity. The backbone of the system is a software system capable of collecting production measurements and current-voltage (I-V) characteristic curve measurements from...

  3. Recent Advances in PV Research and Future Directions

    Science.gov (United States)

    Deb, Satyen K.

    1998-04-01

    The photovoltaic technology is making a major thrust in the commercial arena with 1997 worldwide production of PV modules reaching over 125 MW and growing at the rate of 20-25semiconductor materials and devices are emerging as strong contenders for PV applications even though silicon is still the 'work-horse' of the industry. Ultra-high efficiency solar cells fabricated from gallium arsenide (GaAs) and its ternary alloys like gallium indium phosphide (GaInP2) are finding applications in space technology. Enormous progress has also been made on various thin-film solar cell technologies, which offer the promise for substantially reducing the cost of PV systems. Some of the leading contenders are amorphous and polycrystalline silicon, compound semiconductor thin films such as copper indium diselenide (CuInSe2) based alloys, and cadmium telluride (CdTe) thin films. Exciting new developments are happening in the use of nano-particle semiconductor materials like titanium dioxide (TiO2) for low-cost PV devices. Intense research on these and other materials and devices is making a strong impact on the technology. In this presentation, a brief overview of recent advances in PV research will b e made and the trends and opportunities for future research directions will be identified.

  4. Estimation of PV energy production based on satellite data

    Science.gov (United States)

    Mazurek, G.

    2015-09-01

    Photovoltaic (PV) technology is an attractive source of power for systems without connection to power grid. Because of seasonal variations of solar radiation, design of such a power system requires careful analysis in order to provide required reliability. In this paper we present results of three-year measurements of experimental PV system located in Poland and based on polycrystalline silicon module. Irradiation values calculated from results of ground measurements have been compared with data from solar radiation databases employ calculations from of satellite observations. Good convergence level of both data sources has been shown, especially during summer. When satellite data from the same time period is available, yearly and monthly production of PV energy can be calculated with 2% and 5% accuracy, respectively. However, monthly production during winter seems to be overestimated, especially in January. Results of this work may be helpful in forecasting performance of similar PV systems in Central Europe and allow to make more precise forecasts of PV system performance than based only on tables with long time averaged values.

  5. Modelling of flow and heat transfer in PV cooling channels

    Energy Technology Data Exchange (ETDEWEB)

    Diarra, D.C.; Harrison, S.J. [Queen' s Univ., Kingston, ON (Canada). Dept. of Mechanical and Materials Engineering Solar Calorimetry Lab; Akuffo, F.O. [Kwame Nkrumah Univ. of Science and Technology, Kumasi (Ghana). Dept. of Mechanical Engineering

    2005-07-01

    Under sunny conditions, the temperature of photovoltaic (PV) modules can be 20 to 30 degrees C above the ambient air temperature. This affects the performance of PV modules, particularly in regions with hot climates. For silicon solar cells, the maximum power decreases between 0.4 and 0.5 per cent for every degree C of temperature increase above a reference value. In an effort to address this issue, this experimental and numerical study examined an active PV panel evaporative cooling scheme that is typically used in hot arid climates. The cooling system circulated cool air behind the PV modules, extracting heat and lowering solar cell temperature. A fluid dynamic and thermal model of the combined system was developed using the EES program in order to study the configuration of the cooling channel and the characteristics of the cooling flow. Heat transfer and flow characteristics in the cooling channel were then calculated along with pressure drop and fan power associated with the air-circulation. The net power output was also calculated. The objective was to design a cost efficient cooling system and to optimize its flow and pressure drop in order to maximize power output. The study demonstrated how the performance of the PV panel is influenced by the geometry of the cooling channel, the inlet air temperature and the air flow rate. 2 refs.

  6. Modelling PV modules' performance in Sahelian climates

    Energy Technology Data Exchange (ETDEWEB)

    Diarra, D.C.; Akuffo, F.O. [Kwame Nkrumah Univ. of Science and Technology, Kumasi (Ghana). Dept. of Mechanical Engineering

    2003-08-01

    This paper describes the development of a thermo-optical model designed to evaluate the temperature of a photovoltaic (PV) module in an effort to design a cost-effective cooling system for PV modules operating under high ambient temperatures. The power output of a PV module is greatly reduced when its temperature rises. This loss in efficiency is particularly significant in Sahelian regions where PV modules are subjected to high solar radiation intensities and high ambient temperatures. The newly developed thermo-optical model confirms that most of the heat in a PV module is generated in the solar cell. The results of the analysis include: the optical absorption, reflection and transmission of the solar radiation incident on the module; the temperature distribution in the module; and, the heat transfer through the top and bottom of the module. At incidence angles of 60 degrees, approximately three-quarters of the heat is generated in the solar cell. The optical efficiency is 88.44 per cent at normal incidence angle and 82.48 per cent when the incidence angle is 60 degrees. It was determined that the cooling system should be located as close as possible to the solar cell in order to increase the thermal heat flow from the cell. 4 refs., 3 tabs., 4 figs.

  7. Thermal modelling of PV module performance under high ambient temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Diarra, D.C.; Harrison, S.J. [Queen' s Univ., Kingston, ON (Canada). Dept. of Mechanical and Materials Engineering Solar Calorimetry Lab; Akuffo, F.O. [Kwame Nkrumah Univ. of Science and Technology, Kumasi (Ghana). Dept. of Mechanical Engineering

    2005-07-01

    When predicting the performance of photovoltaic (PV) generators, the actual performance is typically lower than test results conducted under standard test conditions because the radiant energy absorbed in the module under normal operation raises the temperature of the cell and other multilayer components. The increase in temperature translates to a lower conversion efficiency of the solar cells. In order to address these discrepancies, a thermal model of a characteristic PV module was developed to assess and predict its performance under real field-conditions. The PV module consisted of monocrystalline silicon cells in EVA between a glass cover and a tedlar backing sheet. The EES program was used to compute the equilibrium temperature profile in the PV module. It was shown that heat is dissipated towards the bottom and the top of the module, and that its temperature can be much higher than the ambient temperature. Modelling results indicate that 70-75 per cent of the absorbed solar radiation is dissipated from the solar cells as heat, while 4.7 per cent of the solar energy is absorbed in the glass cover and the EVA. It was also shown that the operating temperature of the PV module decreases with increased wind speed. 2 refs.

  8. Design of direct solar PV driven air conditioner

    KAUST Repository

    Huang, Bin-Juine

    2015-12-05

    © 2015 Elsevier Ltd. Solar air conditioning system directly driven by stand-alone solar PV is studied. The air conditioning system will suffer from loss of power if the solar PV power generation is not high enough. It requires a proper system design to match the power consumption of air conditioning system with a proper PV size. Six solar air conditioners with different sizes of PV panel and air conditioners were built and tested outdoors to experimentally investigate the running probabilities of air conditioning at various solar irradiations. It is shown that the instantaneous operation probability (OPB) and the runtime fraction (RF) of the air conditioner are mainly affected by the design parameter rpL (ratio of maximum PV power to load power). The measured OPB is found to be greater than 0.98 at instantaneous solar irradiation IT > 600 W m-2 if rpL > 1.71 RF approaches 1.0 (the air conditioner is run in 100% with solar power) at daily-total solar radiation higher than 13 MJ m-2 day-1, if rpL > 3.

  9. Photovoltaic Module Simulink Model for a Stand-alone PV System

    Science.gov (United States)

    Qi, Chen; Ming, Zhu

    Photovoltaic(PV) Module is indispensable of a stand-alone PV system. In this paper, a one-diode equivalent circuit-based versatile simulation model in the form of masked block PV module is proposed. By the model, it is allowed to estimate behavior of PV module with respect changes on irradiance intensity, ambient temperature and parameters of the PV module. In addition, the model is capable of function of Maximum Power Point Tracking (MPPT) which can be used in the dynamic simulation of stand-alone PV systems.

  10. Budgeting for Solar PV Plant Operations & Maintenance: Practices and Pricing.

    Energy Technology Data Exchange (ETDEWEB)

    Enbar, Nadav [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Weng, Dean [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Klise, Geoffrey Taylor [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-01-01

    With rising grid interconnections of solar photovoltaic (PV) systems, greater attention is being trained on lifecycle performance, reliability, and project economics. Expected to meet production thresholds over a 20-30 year timeframe, PV plants require a steady diet of operations and maintenance (O&M) oversight to meet contractual terms. However, industry best practices are only just beginning to emerge, and O&M budgets—given the arrangement of the solar project value chain—appear to vary widely. Based on insights from in-depth interviews and survey research, this paper presents an overview of the utility-scale PV O&M budgeting process along with guiding rationales, before detailing perspectives on current plant upkeep activities and price points largely in the U.S. It concludes by pondering potential opportunities for improving upon existing O&M budgeting approaches in ways that can benefit the industry at-large.

  11. Budgeting for Solar PV Plant Operations & Maintenance: Practices and Pricing.

    Energy Technology Data Exchange (ETDEWEB)

    Enbar, Nadav [Electric Power Research Inst. (EPRI), Palo Alto, CA (United States); Weng, Dean [Electric Power Research Inst. (EPRI), Palo Alto, CA (United States); Klise, Geoffrey Taylor [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-12-01

    With rising grid interconnections of solar photovoltaic (PV) systems, greater attention is being trained on lifecycle performance, reliability, and project economics. Expected to meet production thresholds over a 20-30 year timeframe, PV plants require a steady diet of operations and maintenance (O&M) oversight to meet contractual terms. However, industry best practices are only just beginning to emerge, and O&M budgets—given the arrangement of the solar project value chain—appear to vary widely. Based on insights from in-depth interviews and survey research, this paper presents an overview of the utility-scale PV O&M budgeting process along with guiding rationales, before detailing perspectives on current plant upkeep activities and price points largely in the U.S. It concludes by pondering potential opportunities for improving upon existing O&M budgeting approaches in ways that can benefi t the industry at-large.

  12. Sizing aspects of a small scale grid connected PV system

    Energy Technology Data Exchange (ETDEWEB)

    Bartha, S.; Teodoreanu, D.I.; Teodoreanu, M.; Negreanu, C. [I.C.P.E.-New Energy Sources Laboratory (NESL), Bucharest (Romania); Farkas, I.; Seres, I. [Szent Istvan University, Goedoelloe (Hungary). Department of Physics and Process Control

    2008-07-01

    Photovoltaics can be used in grid connected mode in two ways: as array installed at the end use site, such as on rooftops, or as utility-scale generating stations. The present paper describes a small-scale grid connected Photovoltaic system. The paper starts with the structure and characterization of the system. The principal technical parameter data are also presented. The used monitoring parameters indicate the principal meteorological data, air temperature and solar radiation data for the location sited at Agigea, at the Black Sea and the produced energy by the PV modules. The present application is made by 1 subsystem with 1200 Wp power and with the panel inclination possibility, using different type of PV modules. The paper presents a simulation model for this system realized with commercial software packages and with a one self made Matlab model that evaluates the energy balance of the PV system. All the simulation and measurements data are presented. (orig.)

  13. Z - Source Multi Level Inverter Based PV Generation System

    Directory of Open Access Journals (Sweden)

    T. Lakhmi kanth

    2014-09-01

    Full Text Available In this paper a novel technique of Z-Source multilevel Inverter based PV Generation system is implemented and simulated using MATLAB-Simulink simulation software. The Photovoltaic cells are healthier option for converting solar energy into electricity. Due to high capital cost and low efficiency PV cells have not yet been a fully smart choice for electricity users. To enhance the performance of the system, Z-Source multi level inverter can be used in place of conventional Voltage Source Inverter (VSI in Solar Power Generation System. The PV cell model is developed using circuit mathematical equations. The Z-Source multilevel inverter is modeled to realize boosted DC to AC conversion (inversion with low THD. Outcome shows that the energy conversion efficiency of ZSMLI is a lot improved as compared to conventional voltage Source Inverter (VSI. By doing FFT analysis we can know the total THD.

  14. Models for a stand-alone PV system

    DEFF Research Database (Denmark)

    Hansen, A.D.; Sørensen, Poul Ejnar; Hansen, L.H.;

    2001-01-01

    This report presents a number of models for modelling and simulation of a stand-alone photovoltaic (PV) system with a battery bank verified against a system installed at Risø National Laboratory. The work has been supported by the Danish Ministry ofEnergy, as a part of the activities in the Solar...... Energy Centre Denmark. The study is carried out at Risø National Laboratory with the main purpose to establish a library of simple mathematical models for each individual element of a stand-alone PVsystem, namely solar cells, battery, controller, inverter and load. The models for PV module and battery...... are based on the model descriptions found in the literature. The battery model is developed at UMASS and is known as the Kinetic Battery Model(KiBaM). The other component models in the PV system are based on simple electrical knowledge. The implementation is done using Matlab/Simulink, a simulation program...

  15. Lessons Learned from the Photovoltaic Manufacturing Technology/PV Manufacturing R&D and Thin Film PV Partnership Projects

    Energy Technology Data Exchange (ETDEWEB)

    Margolis, R.; Mitchell, R.; Zweibel, K.

    2006-09-01

    As the U.S. Department of Energy's (DOE's) Solar Energy Technologies Program initiates new cost-shared solar energy R&D under the Solar America Initiative (SAI), it is useful to analyze the experience gained from cost-shared R&D projects that have been funded through the program to date. This report summarizes lessons learned from two DOE-sponsored photovoltaic (PV) projects: the Photovoltaic Manufacturing Technology/PV Manufacturing R&D (PVMaT/PVMR&D) project and the Thin-Film PV Partnership project. During the past 10-15 years, these two projects have invested roughly $330 million of government resources in cost-shared R&D and leveraged another $190 million in private-sector PV R&D investments. Following a description of key findings and brief descriptions of the PVMaT/PVMR&D and Thin-Film PV Partnership projects, this report presents lessons learned from the projects.

  16. Pseudomonas cannabina pv. cannabina pv. nov., and Pseudomonas cannabina pv. alisalensis (Cintas Koike and Bull, 2000) comb. nov., are members of the emended species Pseudomonas cannabina (ex Sutic & Dowson 1959) Gardan, Shafik, Belouin, Brosch, Grimont & Grimont 1999.

    Science.gov (United States)

    Bull, Carolee T; Manceau, Charles; Lydon, John; Kong, Hyesuk; Vinatzer, Boris A; Fischer-Le Saux, Marion

    2010-04-01

    Sequence similarity in the 16S rDNA gene confirmed that crucifer pathogen Pseudomonas syringae pv. alisalensis belongs to P. syringae sensu lato. In reciprocal DNA/DNA hybridization experiments, DNA relatedness was high (69-100%) between P. syringae pv. alisalensis strains and the type strain of P. cannabina (genomospecies 9). In contrast, DNA relatedness was low (below 48%) between P. syringae pv. alisalensis and reference strains from the remaining genomospecies of P. syringae including the type strain of P. syringae and reference strain of genomospecies 3 (P. syringae pv. tomato) although the well-known crucifer pathogen, P. syringae pv. maculicola, also belongs to genomospecies 3. Additional evidence that P. syringae pv. alisalensis belongs to P. cannabina was sequence similarity in five gene fragments used in multilocus sequence typing, as well as similar rep-PCR patterns when using the BOX-A1R primers. The description of P. cannabina has been emended to include P. syringae pv. alisalensis. Host range testing demonstrated that P. syringae pv. alisalensis strains, originally isolated from broccoli, broccoli raab or arugula, were not pathogenic on Cannabis sativa (family Cannabinaceae). Additionally, P. cannabina strains, originally isolated from the C. sativa were not pathogenic on broccoli raab or oat while P. syringae pv. alisalensis strains were pathogenic on these hosts. Distinct host ranges for these two groups indicate that P. cannabina emend. consists of at least two distinct pathovars, P. cannabina pv. cannabina pv. nov., and P. cannabina pv. alisalensis comb. nov. Pseudomonas syringae pv. maculicola strain CFBP 1637 is a member of P. cannabina.

  17. Energy investments and production costs of amorphous silicon PV modules

    Energy Technology Data Exchange (ETDEWEB)

    Srinivas, K.S. (Neuchatel Univ., Inst. de Microtechnique, Neuchatel (Switzerland))

    1991-10-01

    Viability of large scale applications of photovoltaic technology will ultimately depend upon the economics of energy payback and production costs associated with it. For the potential options among the various PV technologies this aspect has been analysed to a considerable extent for crystalline silicon (mono- and poly-) modules. No systematic study, based on practical aspects of A-Si PV module production has yet been reported. In this study the energy investments and production costs of A-Si PV module production have been analysed based on factual data from two manufacturing units. Each process step involved in the manufacture of A-Si modules is analysed for the process electrical energy and the hidden energy content in the various materials associated with that step. Energy payback period and the production costs have been calculated on the basis of prevailing levels of conversion efficiency (5%) and production yield ([approx equal]80%). The report also covers salient features of A-Si technology, the current status of PV industry in respect of production, R+D and cost status of competing PV technologies. A review of earlier studies on energy investments and production costs of A-Si modules and a comparison of their findings with that of the present study are also discussed. Certain details which could not be included in the main text to maintain the continuity of thoughts, are presented as annexes. A short note on 'criteria for choice of technology for large scale PV production' and a brief description of the status of other thin-film technologies (CIS,CdTe) are included as Appendices at the end. figs., tabs., 18 refs.

  18. Design, Fabrication and Certification of Advanced Modular PV Power Systems

    Science.gov (United States)

    Minyard, Glen E.; Lambarski, Timothy J.

    1997-02-01

    The Design, Fabrication and Certification of Advanced Modular PV Power Systems contract is a Photovoltaic Manufacturing Technology (PVMaT) cost-shared contract under Phase 4A1 for Product Driven Systems and Component Technologies. Phase 4A1 has the goals to improve the cost-effectiveness and manufacturing efficiency of PV end-products, optimize manufacturing and packaging methods, and generally improve balance-of-system performance, integration and manufacturing. This contract has the specific goal to reduce the installed PV system life cycle costs to the customer with the ultimate goal of increasing PV system marketability and customer acceptance. The specific objectives of the project are to develop certified, standardized, modular, pre-engineered products lines of our main stand-alone systems, the Modular Autonomous PV Power Supply (MAPPS) and PV-Generator Hybrid System (Photogenset). To date, we have designed a 200 W MAPPS and a 1 kW Photogenset and are in the process of having the MAPPS certified by Underwriters Laboratories (UL Listed) and approved for hazardous locations by Factory Mutual (FM). We have also developed a manufacturing plan for product line expansion for the MAPPS. The Photogenset will be fabricated in February 1997 and will also be UL Listed. Functionality testing will be performed at NREL and Sandia with the intentions of providing verification of performance and reliability and of developing test-based performance specifications. In addition to an expansion on the goals, objectives and status of the project, specific accomplishments and benefits are also presented in this paper.

  19. Time series power flow analysis for distribution connected PV generation.

    Energy Technology Data Exchange (ETDEWEB)

    Broderick, Robert Joseph; Quiroz, Jimmy Edward; Ellis, Abraham; Reno, Matthew J.; Smith, Jeff; Dugan, Roger

    2013-01-01

    Distributed photovoltaic (PV) projects must go through an interconnection study process before connecting to the distribution grid. These studies are intended to identify the likely impacts and mitigation alternatives. In the majority of the cases, system impacts can be ruled out or mitigation can be identified without an involved study, through a screening process or a simple supplemental review study. For some proposed projects, expensive and time-consuming interconnection studies are required. The challenges to performing the studies are twofold. First, every study scenario is potentially unique, as the studies are often highly specific to the amount of PV generation capacity that varies greatly from feeder to feeder and is often unevenly distributed along the same feeder. This can cause location-specific impacts and mitigations. The second challenge is the inherent variability in PV power output which can interact with feeder operation in complex ways, by affecting the operation of voltage regulation and protection devices. The typical simulation tools and methods in use today for distribution system planning are often not adequate to accurately assess these potential impacts. This report demonstrates how quasi-static time series (QSTS) simulation and high time-resolution data can be used to assess the potential impacts in a more comprehensive manner. The QSTS simulations are applied to a set of sample feeders with high PV deployment to illustrate the usefulness of the approach. The report describes methods that can help determine how PV affects distribution system operations. The simulation results are focused on enhancing the understanding of the underlying technical issues. The examples also highlight the steps needed to perform QSTS simulation and describe the data needed to drive the simulations. The goal of this report is to make the methodology of time series power flow analysis readily accessible to utilities and others responsible for evaluating

  20. Influence of Applying Pig Manure on Arsenic Content of Soil and Brassica campestris%施用猪粪对土壤和菜心砷含量的影响

    Institute of Scientific and Technical Information of China (English)

    彭来真; 刘琳琳; 吕清瑶; 李延

    2011-01-01

    采用盆栽试验的方法,研究施用猪粪对土壤和菜心砷含量的影响.结果表明,随猪粪施用量的增加,土壤全砷、有效态砷和菜心砷含量均提高,且均与猪粪施用量呈极显著的正相关.施用猪粪的同一处理相比较,第2茬土壤全砷、有效态砷和菜心砷含量均高于第1茬.相关分析表明,施用猪粪导致土壤有效态砷含量提高是菜心砷含量增加的主要原因,土壤有效态砷含量可以作为衡量猪粪安全施用的指标.%Pot experiment was conducted to study the influence of applying pig manure on arsenic content of soil and Brassica campestris. The results showed that the content of total, available arsenic in soil and in Brassica campestris increased with pig manure dose raised from 5 g/kg to 60 g/kg. There existed positively significant correlation between the content of total, available arsenic in soil, arsenic in Brassica campestris and pig manure dose. The content of total, available arsenic in soil and in Brassica campestris of second harvest were higher than those of the previous harvest. Statistics analysis showed the uptake coefficient of extractable arsenic content in soil was higher than that of soil total arsenic content, indicating that the increasing of extractable arsenic content in soil coursed by application of pig dung made the increasing of the arsenic content in Brassica campestris. Soil extractable arsenic content could be used as safety index of pig manure application.

  1. Modular Power Converters for PV Applications

    Energy Technology Data Exchange (ETDEWEB)

    Ozpineci, Burak [ORNL; Tolbert, Leon M [ORNL

    2012-05-01

    This report describes technical opportunities to serve as parts of a technological roadmap for Shoals Technologies Group in power electronics for PV applications. There are many different power converter circuits that can be used for solar inverter applications. The present applications do not take advantage of the potential for using common modules. We envision that the development of a power electronics module could enable higher reliability by being durable and flexible. Modules would have fault current limiting features and detection circuits such that they can limit the current through the module from external faults and can identify and isolate internal faults such that the remaining modules can continue to operate with only minimal disturbance to the utility or customer. Development of a reliable, efficient, low-cost, power electronics module will be a key enabling technology for harnessing more power from solar panels and enable plug and play operation. Power electronics for computer power supplies, communication equipment, and transportation have all targeted reliability and modularity as key requirements and have begun concerted efforts to replace monolithic components with collections of common smart modules. This is happening on several levels including (1) device level with intelligent control, (2) functional module level, and (3) system module. This same effort is needed in power electronics for solar applications. Development of modular units will result in standard power electronic converters that will have a lower installed and operating cost for the overall system. These units will lead to increased adaptability and flexibility of solar inverters. Incorporating autonomous fault current limiting and reconfiguration capabilities into the modules and having redundant modules will lead to a durable converter that can withstand the rigors of solar power generation for more than 30 years. Our vision for the technology roadmap is that there is no need

  2. Outdoor PV Module Degradation of Current-Voltage Parameters: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Smith, R. M.; Jordan, D. C.; Kurtz, S. R.

    2012-04-01

    Photovoltaic (PV) module degradation rate analysis quantifies the loss of PV power output over time and is useful for estimating the impact of degradation on the cost of energy. An understanding of the degradation of all current-voltage (I-V) parameters helps to determine the cause of the degradation and also gives useful information for the design of the system. This study reports on data collected from 12 distinct mono- and poly-crystalline modules deployed at the National Renewable Energy Laboratory (NREL) in Golden, Colorado. Most modules investigated showed < 0.5%/year decrease in maximum power due to short-circuit current decline.

  3. PV domestic field trial. Third annual technical report

    Energy Technology Data Exchange (ETDEWEB)

    Crick, F.; Davies, N.; Munzinger, M.; Pearsall, N.; Martin, C.

    2004-07-01

    This report summaries the results of a field trials investigating the design, construction and operation of photovoltaic (PV) systems installed during 2003 to provide information for utilities, building developers and those involved in PV installations and operations. Topics examined include the appearance of the systems, their architectural integration, the different fixing methods, the cost effectiveness of the systems, problems encountered, and monitoring activities. Key issues discussed include communication and co-ordination between interested bodies, siting and location, and good practice. Details are given of monitoring inspection visits, and performance analysis.

  4. High Efficient Bidirectional Battery Converter for residential PV Systems

    DEFF Research Database (Denmark)

    Pham, Cam; Kerekes, Tamas; Teodorescu, Remus

    2012-01-01

    Photovoltaic (PV) installation is suited for the residential environment and the generation pattern follows the distribution of residential power consumption in daylight hours. In the cases of unbalance between generation and demand, the Smart PV with its battery storage can absorb or inject...... the power to balance it. High efficient bidirectional converter for the battery storage is required due high system cost and because the power is processed twice. A 1.5kW prototype is designed and built with CoolMOS and SiC diodes, >;95% efficiency has been obtained with 200 kHz hard switching....

  5. Design and Implementation of A PV Powered Tri-Cycle

    Directory of Open Access Journals (Sweden)

    Soumya Das

    2016-04-01

    Full Text Available Solar PV technology is one of the first among the various renewable energy technologies that have been adopted and accepted universally in order to meet the basic needs of generation of electricity. The objective of this paper is to propose a tri-cycle that utilises the application of stand-alone photovoltaic (PV system. A preliminary design and construction of a solar tri-cycle has been performed by evaluating and estimating the required panel size, battery capacity and motor power. Calculation in this paper exhibit that the solar power alone will be sufficient to operate a tri-cycle from one place to another.

  6. Quantifying PV module microclimates and translation into accelerated weathering protocols

    Science.gov (United States)

    Phillips, Nancy H.; Scott, Kurt P.

    2014-10-01

    Long term reliability is not well addressed by current standards for PV modules or components, and developing accelerated weathering stress protocols to test the resistance of key components to wear-out is an active area of research. A first step is to understand and quantify the range of actual stresses modules will encounter in the various mounting configurations and in-service environments. In this paper, we use real-world data to benchmark PV module service environments in hot/dry, hot/wet, and temperate environments, with subsequent analysis to translate the microclimate data into a portfolio of practical weathering instrument settings.

  7. Task 9. PV deployment in developing countries. Institutional framework and financial instruments for PV deployment in developing countries

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-09-15

    This report for the International Energy Agency (IEA) made by Task 9 of the Photovoltaic Power Systems (PVPS) programme takes a look at the institutional framework and financial instruments necessary for PV deployment in developing countries. This guide describes the institutional and financial aspects that need to be addressed to ensure that a long term sustainable (and profitable) PV market is established in developing countries. The guide details main fundamental functions that need to be performed such as the agents needed to perform the functions and their differing roles within the framework, the relationships between these agents and the financial instruments available. It is stated that the majority of the aspects recommended in this guide can be adopted to two main PV deployment models: direct sales and rural electrification and development programmes. It is noted that both approaches will have to be tailored and adapted to local conditions.

  8. Berkeley Program Offers New Option for Financing Residential PV Systems

    Energy Technology Data Exchange (ETDEWEB)

    Bolinger, Mark A

    2008-07-06

    Readily accessible credit has often been cited as a necessary ingredient to open up the market for residential photovoltaic (PV) systems. Though financing does not reduce the high up-front cost of PV, by spreading that cost over some portion of the system's life, financing can certainly make PV systems more affordable. As a result, a number of states have, in the past, set up special residential loan programs targeting the installation of renewable energy systems and/or energy-efficiency improvements and often featuring low interest rates, longer terms and no-hassle application requirements. Historically, these loan programs have had mixed success (particularly for PV), for a variety of reasons, including a historical lack of homeowner interest in PV, a lack of program awareness, a reduced appeal in a low-interest-rate environment, and a tendency for early PV adopters to be wealthy and not in need of financing. Some of these barriers have begun to fade. Most notably, homeowner interest in PV has grown in some states, particularly those that offer solar rebates. The passage of the Energy Policy Act of 2005 (EPAct 2005), however, introduced one additional roadblock to the success of low-interest PV loan programs: a residential solar investment tax credit (ITC), subject to the Federal government's 'anti-double-dipping' rules. Specifically, the residential solar ITC--equal to 30% of the system's tax basis, capped at $2000--will be reduced or offset if the system also benefits from what is known as 'subsidized energy financing', which is likely to include most government-sponsored low-interest loan programs. Within this context, it has been interesting to note the recent flurry of announcements from a number of U.S cities concerning a new type of PV financing program. Led by the city of Berkeley, Calif., these cities propose to offer their residents the ability to finance the installation of a PV system using increased property tax

  9. Rhizosphere competent Mesorhizobiumloti MP6 induces root hair curling, inhibits Sclerotinia sclerotiorum and enhances growth of Indian mustard (Brassica campestris Mesorhizobium loti MP6 rizosférico competente induz encurvamento do pelo daraiz, inibe Sclerotinia sclerotiorum e estimula o crescimento de mostarda indiana (Brassica campestris

    Directory of Open Access Journals (Sweden)

    Shikha Chandra

    2007-03-01

    Full Text Available The bacterial strain Mesorhizobium loti MP6, isolated from root nodules of Mimosa pudica induced growth and yield of Brassica campestris. The isolate MP6 secreted hydroxamate type siderophore in Chrom-Azurol Siderophore (CAS agar medium. Production of hydrocyanic acid (HCN, indole acetic acid (IAA and phosphate solubilizing ability was also recorded under normal growth conditions. Root hair curling was observed through simple glass-slide technique. In vitro study showed a significant increase in population of M. loti MP6 in rhizosphere due to root exudates of B. campestris. In dual culture technique the strain showed a strong antagonistic effect against Sclerotinia sclerotiorum, a white rot pathogen of Brassica campestris. The growth of S. sclerotiorum was inhibited by 75% after prolonged incubation. Efficient root colonization of mustard seedlings was confirmed by using a streptomycin-resistant marker M. loti MP6strep+. The M. loti MP6 coated seeds proved enhanced seed germination, early vegetative growth and grain yield as compared to control. Also, a drastic decline (99% in the incidence of white rot was observed due to application of M. loti MP6.A cepa bacteriana Mesorhizobium loti MP6 isolada de nódulos de raiz de Mimosa pudica induziu o crescimento e o rendimento de Brassica campestris. A cepa MP6 secretou sideróforo do tipo hidroxamato em meio sólido Chrom-Azurol Siderophore (CAS. Em condições normais de crescimento, a cepa foi também capaz de produzir de ácido cianídrico (HCN e acido indolacético (AIA e solubilizar fosfato. O encurvamento do pelo da raiz foi observado usando a simples técnica de lâmina e lamínula. Estudos in vitro mostraram um aumento significativo na população de M. loti MP6 na rizosfera devido aos exsudatos de B. campestris. Empregando-se técnica de co-cultura, a cepa mostrou um grande efeito antagônico contra o fungo Sclerotinia sclerotiorum, o patógeno da podridão branca de Brassica campestris. Ap

  10. NCBI nr-aa BLAST: CBRC-GGAL-15-0007 [SEVENS

    Lifescience Database Archive (English)

    Full Text Available CBRC-GGAL-15-0007 ref|YP_362914.1| putative secreted protein [Xanthomonas campestri...s pv. vesicatoria str. 85-10] emb|CAJ22814.1| putative secreted protein [Xanthomonas campestris pv. vesicatoria str. 85-10] YP_362914.1 1.1 37% ...

  11. Comparison of three different methods of perturbing the potential vorticity field in mesoscale forecasts of Mediterranean heavy precipitation events: PV-gradient, PV-adjoint and PV-satellite

    Science.gov (United States)

    Vich, M.; Romero, R.; Richard, E.; Arbogast, P.; Maynard, K.

    2010-09-01

    Heavy precipitation events occur regularly in the western Mediterranean region. These events often have a high impact on the society due to economic and personal losses. The improvement of the mesoscale numerical forecasts of these events can be used to prevent or minimize their impact on the society. In previous studies, two ensemble prediction systems (EPSs) based on perturbing the model initial and boundary conditions were developed and tested for a collection of high-impact MEDEX cyclonic episodes. These EPSs perturb the initial and boundary potential vorticity (PV) field through a PV inversion algorithm. This technique ensures modifications of all the meteorological fields without compromising the mass-wind balance. One EPS introduces the perturbations along the zones of the three-dimensional PV structure presenting the local most intense values and gradients of the field (a semi-objective choice, PV-gradient), while the other perturbs the PV field over the MM5 adjoint model calculated sensitivity zones (an objective method, PV-adjoint). The PV perturbations are set from a PV error climatology (PVEC) that characterizes typical PV errors in the ECMWF forecasts, both in intensity and displacement. This intensity and displacement perturbation of the PV field is chosen randomly, while its location is given by the perturbation zones defined in each ensemble generation method. Encouraged by the good results obtained by these two EPSs that perturb the PV field, a new approach based on a manual perturbation of the PV field has been tested and compared with the previous results. This technique uses the satellite water vapor (WV) observations to guide the correction of initial PV structures. The correction of the PV field intents to improve the match between the PV distribution and the WV image, taking advantage of the relation between dark and bright features of WV images and PV anomalies, under some assumptions. Afterwards, the PV inversion algorithm is applied to run

  12. Quantification, challenges and outlook of PV integration in the power system: a review by the European PV Technology Platform

    DEFF Research Database (Denmark)

    Alet, Pierre-Jean; Baccaro, Federica; De Felice, Matteo;

    2015-01-01

    networks. Forecasting, storage, and combination with other renewable sources are interdependent solutions to solve the intermittency issue. Finally, we found that PV is also an opportunity to reduce some investment required to upgrade existing power networks. Through integration with micro-grids and hybrid...... rather than energy better reflect the impact on networks. Barriers to wider deployment of PV into power grids can be split between local technical issues (voltage levels, harmonics distortion, reverse power flows and transformer loading) and system-wide issues (intermittency, reduction of system...

  13. Draft genome sequences of five Pseudomonas syringae pv. actinidifoliorum strains isolated in France.

    Science.gov (United States)

    Cunty, Amandine; Cesbron, Sophie; Briand, Martial; Carrère, Sébastien; Poliakoff, Françoise; Jacques, Marie-Agnès; Manceau, Charles

    2016-01-01

    Pseudomonas syringae pv. actinidifoliorum causes necrotic spots on the leaves of Actinidia deliciosa and Actinidia chinensis. P. syringae pv. actinidifoliorum has been detected in New Zealand, Australia, France and Spain. Four lineages were previously identified within the P. syringae pv. actinidifoliorum species group. Here, we report the draft genome sequences of five strains of P. syringae pv. actinidifoliorum representative of lineages 1, 2 and 4, isolated in France. The whole genomes of strains isolated in New Zealand, representative of P. syringae pv. actinidifoliorum lineages 1 and 3, were previously sequenced. The availability of supplementary P. syringae pv. actinidifoliorum genome sequences will be useful for developing molecular tools for pathogen detection and for performing comparative genomic analyses to study the relationship between P. syringae pv. actinidifoliorum and other kiwifruit pathogens, such as P. syringae pv. actinidiae. PMID:27237113

  14. Dynamic Model Validation of PV Inverters Under Short-Circuit Conditions: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Muljadi, E.; Singh, M.; Bravo, R.; Gevorgian, V.

    2013-03-01

    Photovoltaic (PV) modules have dramatically decreased in price in the past few years, spurring the expansion of photovoltaic deployment. Residential and commercial rooftop installations are connected to the distribution network; large-scale installation PV power plants (PVPs) have benefited from tax incentives and the low cost of PV modules. As the level penetration of PV generation increases, the impact on power system reliability will also be greater. Utility power system planners must consider the role of PV generation in power systems more realistically by representing PV generation in dynamic stability analyses. Dynamic models of PV inverters have been developed in the positive sequence representation. NREL has developed a PV inverter dynamic model in PSCAD/EMTDC. This paper validates the dynamic model with an actual hardware bench test conducted by Southern California Edison's Distributed Energy Resources laboratory. All the fault combinations -- symmetrical and unsymmetrical -- were performed in the laboratory. We compare the simulation results with the bench test results.

  15. Climatically Diverse Data Set for Flat-Plate PV Module Model Validations (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Marion, B.

    2013-05-01

    Photovoltaic (PV) module I-V curves were measured at Florida, Colorado, and Oregon locations to provide data for the validation and development of models used for predicting the performance of PV modules.

  16. Best practices for mitigating soiling risk on PV power plants

    KAUST Repository

    AlDowsari, A.

    2015-09-24

    Solar power generates proven, predictable and economical energy and new innovations have made solar PV power plants easy to deploy, integrate and maintain. Areas with large solar energy potential are among the dustiest in the world. At first glance, solar would be a natural fit in many of these environments but humidity, airborne dust, and wind of these regions often bring high soiling rates that can accumulate to reduce performance by up to 10% per month on average, where soiling can be a major loss factor that affects the energy yield for PV plants especially in humid and dusty climates. Therefore, to achieve the desired performance ratio and obtain stable generation, mitigation solutions are proposed to overcome dust issues that affect the performance of PV plants. This makes PV module cleaning a key component for long-term plant performance and sustainable profitability. In this paper, a review of the mechanisms and mitigation solutions to overcome soiling on solar installations using real-world testing and verification is investigated with emphasis on dry type cleaning methods. © 2014 IEEE.

  17. Comparison of Predictive Models for PV Module Performance (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Marion, B.

    2008-05-01

    This paper examines three models used to estimate the maximum power (P{sub m}) of PV modules when the irradiance and PV cell temperature are known: (1) the power temperature coefficient model, (2) the PVFORM model, and (3) the bilinear interpolation model. A variation of the power temperature coefficient model is also presented that improved model accuracy. For modeling values of P{sub m}, an 'effective' plane-of-array (POA) irradiance (E{sub e}) and the PV cell temperature (T) are used as model inputs. Using E{sub e} essentially removes the effects of variations in solar spectrum and reflectance losses, and permits the influence of irradiance and temperature on model performance for P{sub m} to be more easily studied. Eq. 1 is used to determine E{sub e} from T and the PV module's measured short-circuit current (I{sub sc}). Zero subscripts denote performance at Standard Reporting Conditions (SRC).

  18. Performance enhancement of PV cells through micro-channel cooling

    Directory of Open Access Journals (Sweden)

    Muzaffar Ali

    2015-11-01

    Full Text Available Efficiency of a PV cell is strongly dependent on its surface temperature. The current study is focused to achieve maximum efficiency of PV cells even in scorching temperatures in hot climates like Pakistan where the cell surface temperatures can even rise up to around 80 ℃. The study includes both the CFD and real time experimental investigations of a solar panel using micro channel cooling. Initially, CFD analysis is performed by developing a 3D model of a Mono-Crystalline cell with micro-channels to analyze cell surface temperature distribution at different irradiance and water flow rates. Afterwards, an experimental setup is developed for performance investigations under the real conditions of an open climate of a Pakistan's city, Taxila. Two 35W panels are manufactured for the experiments; one is based on the standard manufacturing procedure while other cell is developed with 4mm thick aluminum sheet having micro-channels of cross-section of 1mm by 1mm. The whole setup also includes different sensors for the measurement of solar irradiance, cell power, surface temperature and water flow rates. The experimental results show that PV cell surface temperature drop of around 15 ℃ is achieved with power increment of around 14% at maximum applied water flow rate of 3 LPM. Additionally, a good agreement is also found between CFD and experimental results. Therefore, that study clearly shows that a significant performance improvement of PV cells can be achieved through the proposed cell cooling technique.

  19. PV Systems Reliability Final Technical Report: Ground Fault Detection

    Energy Technology Data Exchange (ETDEWEB)

    Lavrova, Olga [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Flicker, Jack David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Johnson, Jay [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-01-01

    We have examined ground faults in PhotoVoltaic (PV) arrays and the efficacy of fuse, current detection (RCD), current sense monitoring/relays (CSM), isolation/insulation (Riso) monitoring, and Ground Fault Detection and Isolation (GFID) using simulations based on a Simulation Program with Integrated Circuit Emphasis SPICE ground fault circuit model, experimental ground faults installed on real arrays, and theoretical equations.

  20. PV power system using hybrid converter for LED indictor applications

    International Nuclear Information System (INIS)

    Highlights: • This paper presents a LED indictor driving circuit with a PV arrays as its power source. • The perturb-and-observe method is adopted to extract the maximum power of PV arrays. • The proposed circuit structure has a less component counts and higher conversion efficiency. • A prototype of LED indictor driving circuit has been implemented to verify its feasibility. • The proposed hybrid converter is suitable for LED inductor applications. - Abstract: This paper presents a LED indictor driving circuit with a PV arrays as its power source. The LED indictor driving circuit includes battery charger and discharger (LED driving circuit). In this research, buck converter is used as a charger, and forward converter with active clamp circuit is adopted as a discharger to drive the LED indictor. Their circuit structures use switch integration technique to simplify them and to form the proposed hybrid converter, which has a less component counts, lighter weight, smaller size, and higher conversion efficiency. Moreover, the proposed hybrid converter uses a perturb-and-observe method to extract the maximum power from PV arrays. Finally, a prototype of an LED indictor driving circuit with output voltage of 10 V and output power of 20 W has been implemented to verify its feasibility. It is suitable for the LED inductor applications

  1. Development of white LED based PV lighting systems

    Energy Technology Data Exchange (ETDEWEB)

    Sastry, O.S.; Pant, P.C.; Prasad, G.; Kumar, Rajesh; Bandyopadhyay, Bibek [Solar Energy Centre, Ministry of New and Renewable Energy, Block 14, CGO Complex, Lodhi Road, New Delhi 110003 (India); Kamala Devi, V. [Agency for Non-Conventional Energy and Rural Technology, P.B. No. 1094, Pattom, P.O. Kasavadasapuram, Trivandrum, Kerala 695 004 (India)

    2010-09-15

    A high performance white light emitting diode (WLED) based PV lighting system has been developed under a joint project of SEC and ANERT. The system has been analyzed using the test set-ups developed as a part of advanced lighting laboratory (ALL). The results show that the performance is one of the best among the systems developed in the capacity range. (author)

  2. Selecting Solar. Insights into Residential Photovoltaic (PV) Quote Variation

    Energy Technology Data Exchange (ETDEWEB)

    Davidson, Carolyn [National Renewable Energy Lab. (NREL), Golden, CO (United States); Margolis, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-10-01

    This analysis leverages available data from EnergySage, an online solar marketplace, to offer the first data-driven characterization of quote variation faced by prospective PV customers, lending early insight into the decisions customers face once they have initial buy-in.

  3. PV industry growth and module reliability in Thailand

    Science.gov (United States)

    Chenvidhya, Dhirayut; Seapan, Manit; Sangpongsanont, Yaowanee; Chenvidhya, Tanokkorn; Limsakul, Chamnan; Songprakorp, Roongrojana

    2015-09-01

    The PV applications in Thailand are now installed more than 1.2 GWp cumulatively. It is due to the National Renewable Energy Program and its targets. In the latest Alternative Energy Development Plan (AEDP), the PV electricity production target has increased from 2 GWp to 3 GWp. With this rapid growth, customers and manufacturers seek for module standard testing. So far over one thousands of PV modules per annum have been tested since 2012. The normal tests include type approval test according to TIS standard, acceptance test and testing for local standard development. For type test, the most module failure was found during damp heat test. For annual evaluation test, the power degradation and delamination of power was found between 0 to 6 percent from its nameplate after deployment of 0 to 5 years in the field. For thin-film module, the degradation and delamination was found in range of 0 to 13 percent (about 5 percent on average) from its nameplate for the modules in operation with less than 5 years. However, for the PV modules at the reference site on campus operated for 12 years, the power degradation was ranging from 10 to 15 percent. Therefore, a long term performance assessment needs to be considered to ensure the system reliability.

  4. Detection of Pseudomonas savastanoi pv. glycinea in soybean seeds

    Science.gov (United States)

    This chapter is one of 52 that will compose the second edition of the Laboratory Manual for the Detection of Plant Pathogenic Bacteria from Seeds and other Planting Material, to be published by the American Phytopathological Society. The chapter presents a description of Pseudomonas savastanoi pv. ...

  5. 5bv.3.21 PV led engine

    DEFF Research Database (Denmark)

    Thorsteinsson, Sune; Poulsen, Peter Behrensdorff; Dam-Hansen, Carsten;

    PV-powered lighting systems, light to light systems (L2L), offer outdoor lighting where it is elsewhere cumbersome to enable lighting. Application of these systems at high latitudes, where the difference in day length between summer and winter is large and the solar energy is less requires smart ...

  6. ECO-TOURISM SUSTAINABILITY THROUGH PV TECHNOLOGY: A COMPREHENSIVE REVIEW

    Directory of Open Access Journals (Sweden)

    ARAVIND C. V

    2013-12-01

    Full Text Available Through the Economic Transformation program the Malaysian Government aims to consider tourism as one of the major contributors to the country’s economy and as an industry that imbibe on the principles of environmental responsibility and sustainable development. The growing challenges in the prevention of expansion in agriculture, forestry and aquaculture, and over-exploitation of the natural resources, have made ecotourism extremely popular as a solution for developing tourism sites. Ecotourism attracts many people who wish not only to explore natural wonders but also to protect them for future generations. Most of the ecotourism sites are presumably situated far from the conventional energy resources and thus transporting electricity to those areas are discussed as inefficient and unsustainable. However, solar Photo-voltaic (PV system is clean and alternative energy to suffice the energy demands of eco-tourist sites. This paper puts statements of the energy demand in global and its impact on the traditional fossil fuels and proposes PV as an alternative renewable technology pertaining to the eco-tourism application. The paper especially focuses on solar PV systems which not only could supply the energy demand of tourist sites but can also maintain the image of the ecotourism. A case of a model lodge is used for the study, through the energy demand analysis. A comprehensive review on the PV architecture is presented that derive interest in the implementation of such structure for the case presented.

  7. Recent advances in PV systems technology development in Europe

    Energy Technology Data Exchange (ETDEWEB)

    Imamura, M.; Grottke, M.; Weiss, I. [WIP Renewable Energies Division, Munich (Germany)

    1995-11-01

    The objectives of the photovoltaics (PV) systems technology development were to study several aspects of plant design, monitoring, control, operation, and management of different types of photovoltaic plants. Unsolved problems were to be identified and analysed, and guidelines to improve the monitoring system were to be developed. Principal studies are summarized.

  8. Development of solar energy for efficient PV application systems

    International Nuclear Information System (INIS)

    It is essential to increase research, development, awareness for the application of solar energy as an important source of life. The cost of PV systems has decreased due to the improvement in techniques of manufacturing and performance. In reality, photovoltaic is one technology that allows the production of electricity with only two components: technological, which is the PV module and environmental, which is the sun. The knowledge of the components market represents a critical parameters in establishing sustainable industrial applications on different activity sectors. This paper illustrates the advantages of using photovoltaic in rural area and their economic and environmental impact. In regions where petroleum or other fossil fuels are not available, and where these remote area are not connected to the electrical grid, there is a strong and increasing demand for the technologies related to photovoltaic application systems. Water extracting and pumping, telecommunication and lighting, irrigation systems, electrical driven cars and trucks represent some of these important applications. The paper also develops critical skills for the most useful PV application in Egypt and provide to the industry a development forecast for the new technology. Then an initiation contacts and cooperation on PV application between industries specially in North Africa Middle East in order to improve the reliability and to get cheaper systems.(Author)

  9. Voltage rise mitigation for solar PV integration at LV grids:Studies from PVNET. dk

    OpenAIRE

    Yang, Guangya; Marra, Francesco; Juamperez Goñi, Miguel Angel; Kjaer, Søren Bækhøj; Hashemi Toghroljerdi, Seyedmostafa; Østergaard, Jacob; Hans Henrik, Ipsen; Kenn H. B., Frederiksen

    2015-01-01

    Solar energy from photovoltaic (PV) is among the fastest developing renewable energy systems worldwide. Driven by governmental subsidies and technological development, Europe has seen a fast expansion of solar PV in the last few years. Among the installed PV plants, most of them are situated at the distribution systems and bring various operational challenges such as power quality and power flow management. The paper discusses the modelling requirements for PV system integration studies, as w...

  10. Power Output Improvement of PV Module for Agricultural Use by Using Inexpensive Sunlight Concentrator

    Institute of Scientific and Technical Information of China (English)

    NISHIMURA Ryo

    2010-01-01

    PV modules are used as stand alone power sources for agricultural equipments such as lifting pumps in farms,where the power infrastructure is not yet improved.In order to expand the agricultural use of PV module,the cost of PV generation should be reduced.In this paper,the power output performance of a commercial PV module was improved by using a sunlight concentrator that could be assembled inexpensively and a simple sun-tracking method.

  11. PV-θ view of the zonal mean state of the atmosphere

    Directory of Open Access Journals (Sweden)

    Aarnout J. Van Delden

    2012-08-01

    Full Text Available The relation between zonal mean potential vorticity (PV in potential temperature (θ coordinates and the zonal mean zonal wind in January and in July is studied. PV-anomalies are defined with respect to a reference state that is at rest with respect to the rotating earth. Two important PV-anomalies are identified. One PV-anomaly, the ‘Ex-UTLS PV-anomaly’, coincides approximately with the extratropical tropopause (310–360 K. It is a permanent feature of the zonal mean state. The other PV-anomaly is located higher in the stratosphere. It exhibits a strong seasonal cycle, i.e. in winter, it is strongly positive, while in summer, it is weakly negative. In the Northern Hemisphere winter, the Ex-UTLS PV-anomaly and the stratospheric PV-anomaly are separated by a ‘surf-zone’, which is characterised by a negative PV-anomaly pole-wards of a positive PV-anomaly. Piecewise PV-inversion reveals that (1 the Ex-UTLS PV-anomaly induces the westerly winds in the troposphere and the lower stratosphere, including the subtropical jet, that (2 the positive stratospheric PV-anomaly induces the stratospheric polar night jet and that (3 the negative polar cap stratospheric PV-anomaly in summer reduces the westerly wind speeds in the troposphere and induces easterly winds in the stratosphere. The Ex-UTLS PV-anomaly is manifest mainly as an isentropic density- (or mass- anomaly. Piecewise PV-inversion of these anomalies in isolation should account for this by an appropriate adjustment of the lower boundary condition.

  12. An Improved Matlab-Simulink Model of PV Module considering Ambient Conditions

    OpenAIRE

    2014-01-01

    A photovoltaic (PV) model is proposed on Matlab/Simulink environment considering the real atmospheric conditions and this PV model is tested with different PV panels technologies (monocrystalline silicon, polycrystalline silicon, and thin film). The meteorological data of Istanbul—the location of the study—such as irradiance, cell temperature, and wind speed are taken into account in the proposed model for each technology. Eventually, the power outputs of the PV module under real atmospheric ...

  13. Rooftop PV system. PV:BONUS Phase 3B, final technical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-11-01

    Under the PV:BONUS Program, ECD and United Solar developed, demonstrated and commercialized two new lightweight, flexible BIPV modules specifically designed as replacements for conventional asphalt shingles and standing seam metal roofing. These modules can be economically and aesthetically integrated into new residential and commercial buildings, and can be used to address the even larger roofing-replacement market. An important design feature of these modules, which minimizes the installation and balance-of-system costs, is their ability to be installed by conventional roofing contractors without special training. The modules are fabricated from high-efficiency, triple-junction spectrum-splitting a-Si alloy solar cells developed by ECD and United Solar. These cells are produced on thin, flexible stainless steel substrates and encapsulated with polymer materials. The Phase 3 program began in August 1995. The principal tasks and goals of this program, which have all been successfully completed by ECD and United Solar, are described in the body and appendices of this report.

  14. PV value analysis: Progress report on PV-Compact Coordinating Council's consensus research agenda

    International Nuclear Information System (INIS)

    A survey of published and ongoing valuation research indicates that grid-connected photovoltaic (PV) technology is at or close to cost-effectiveness, from the utility or end-user point of view, in an increasing but carefully selected array of distributed utility applications. This conclusion is based on conventional analyses of utility avoided costs (energy, effective load carrying capability, and transmission and distribution costs including line losses) and customer benefits (energy and demand bill savings, tax benefits). It may provide the basis for regulatory review of utility transmission or distribution investments to test prudence or usefulness. The conclusion would be stronger with consideration of the values of risk mitigation, power quality, strategic value to utilities, and satisfaction of customer preference. Further work would therefore be useful in quantifying these factors. The economic conclusions prevail irrespective of the structure of the utility industry. However, the analysis is site-specific so its broad application depends on development of easily operated models and other analytical tools for use in the field and by the regulatory process

  15. Solar PV Manufacturing Cost Model Group: Installed Solar PV System Prices (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Goodrich, A. C.; Woodhouse, M.; James, T.

    2011-02-01

    EERE's Solar Energy Technologies Program is charged with leading the Secretary's SunShot Initiative to reduce the cost of electricity from solar by 75% to be cost competitive with conventional energy sources without subsidy by the end of the decade. As part of this Initiative, the program has funded the National Renewable Energy Laboratory (NREL) to develop module manufacturing and solar PV system installation cost models to ensure that the program's cost reduction targets are carefully aligned with current and near term industry costs. The NREL cost analysis team has leveraged the laboratories' extensive experience in the areas of project finance and deployment, as well as industry partnerships, to develop cost models that mirror the project cost analysis tools used by project managers at leading U.S. installers. The cost models are constructed through a "bottoms-up" assessment of each major cost element, beginning with the system's bill of materials, labor requirements (type and hours) by component, site-specific charges, and soft costs. In addition to the relevant engineering, procurement, and construction costs, the models also consider all relevant costs to an installer, including labor burdens and overhead rates, supply chain costs, and overhead and materials inventory costs, and assume market-specific profits.

  16. Insights into xanthomonas axonopodis pv. Citri biofilm through proteomics

    KAUST Repository

    Zimaro, Tamara

    2013-08-07

    Background: Xanthomonas axonopodis pv. Citri (X. a. pv. Citri) causes citrus canker that can result in defoliation and premature fruit drop with significant production losses worldwide. Biofilm formation is an important process in bacterial pathogens and several lines of evidence suggest that in X. a. pv. Citri this process is a requirement to achieve maximal virulence since it has a major role in host interactions. In this study, proteomics was used to gain further insights into the functions of biofilms. Results: In order to identify differentially expressed proteins, a comparative proteomic study using 2D difference gel electrophoresis was carried out on X. a. pv. Citri mature biofilm and planktonic cells. The biofilm proteome showed major variations in the composition of outer membrane proteins and receptor or transport proteins. Among them, several porins and TonB-dependent receptor were differentially regulated in the biofilm compared to the planktonic cells, indicating that these proteins may serve in maintaining specific membrane-associated functions including signaling and cellular homeostasis. In biofilms, UDP-glucose dehydrogenase with a major role in exopolysaccharide production and the non-fimbrial adhesin YapH involved in adherence were over-expressed, while a polynucleotide phosphorylase that was demonstrated to negatively control biofilm formation in E. coli was down-regulated. In addition, several proteins involved in protein synthesis, folding and stabilization were up-regulated in biofilms. Interestingly, some proteins related to energy production, such as ATP-synthase were down-regulated in biofilms. Moreover, a number of enzymes of the tricarboxylic acid cycle were differentially expressed. In addition, X. a. pv. Citri biofilms also showed down-regulation of several antioxidant enzymes. The respective gene expression patterns of several identified proteins in both X. a. pv. Citri mature biofilm and planktonic cells were evaluated by

  17. DOE Request for Information (RFI) DE-FOA-0000153 PV Manufacturing Initiative

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2010-02-01

    This draft report summarizes the results of the U.S. Department of Energy PV Manufacturing Request for Information (RFI), DE-FOA-0000153, that was released in September 2009. The PV Manufacturing Initiative is intended to help facilitate the development of a strong PV manufacturing industry in the United States.

  18. Household photovoltaic market in Xining, Qingha province, China: the role of local PV business

    International Nuclear Information System (INIS)

    This paper assesses the present and future market for household photovoltaic (PV) systems in rural Northwest China, especially from the PV commerce at Xining, Qinghai Province. This unsubsidised free market is now met by the emerging PV industry in China, which includes cell and module manufacturers, and PV system distributors and assemblers. For widespread deployment of such a renewable energy technology, the development of a local free market seems more successful than donor- or 'government subsidy'-driven programmes. Presently, there is a thriving infant PV industry in Northwest China, mostly centred in Xining. Xining-based PV sales companies have extensive networks for selling, marketing and servicing household PV systems for rural farmers and nomads. Small systems are now ordinary items on sale in local shops. Based on interviews and fieldwork observations with seven major PV sales companies in Xining, the household PV market is assessed from the present business operations of these companies. Detail of primary sources is given with the aim of archiving seminal progress in the history of photovoltaic power. The results suggest that although the household PV market will continue to grow, current government and international sponsored PV programmes can create both opportunities and barriers for the infant PV market an industry in China. (author)

  19. Importance of policy for energy system transformation: Diffusion of PV technology in Japan and Germany

    International Nuclear Information System (INIS)

    Photovoltaic (PV) has the highest cost reduction potential among all renewable energy sources (RES). To overcome institutional barriers, developing the technology, and creating an initial market, policies are needed. Comparative case studies of Japan and German PV sector from 1990 to 2011 were developed. Japan dominated the PV industry during 1994–2004, PV market increased to 290 MW in 2005. After 2005 Japan's PV market decreased. German PV market increased from 44 MW in 2000 to 7.5 GW in 2011. The reason behind Japanese PV market decline was the unaligned energy policy and termination of incentives. This paper discusses about successful policy implementation and the impact of policy for the diffusion of PV technology. The analysis section of this paper shows how much the PV technology has been diffused during the period of 1990–2011 and finally what will make the transformation process successful. - Highlights: • We studied PV diffusion of Japan and German considering public energy policy, environmental policy and cost reduction. • This study determined that policy and incentives are responsible for cost reduction. • Japans concentration on nuclear energy more than renewables, made the PV diffusion slow. • Successful implementation of FIT helped Germany reduce PV electricity price more than grid electricity

  20. Grid Integration of PV Power based on PHIL testing using different Interface Algorithms

    DEFF Research Database (Denmark)

    Craciun, Bogdan-Ionut; Kerekes, Tamas; Sera, Dezso;

    2013-01-01

    be more active in grid support. Therefore, a better understanding and detailed analysis of the PV systems interaction with the grid is needed; hence power hardware in the loop (PHIL) testing involving PV power became an interesting subject to look into. To test PV systems for grid code (GC...

  1. Analytical expression for electrical efficiency of PV/T hybrid air collector

    Energy Technology Data Exchange (ETDEWEB)

    Dubey, Swapnil; Sandhu, G.S.; Tiwari, G.N. [Centre for Energy Studies, Indian Institute of Technology Delhi, Hauz Khas, New Delhi 110 016 (India)

    2009-05-15

    The overall electrical efficiency of the photovoltaic (PV) module can be increased by reducing the temperature of the PV module by withdrawing the thermal energy associated with the PV module. In this communication an attempt has been made to develop analytical expression for electrical efficiency of PV module with and without flow as a function of climatic and design parameters. The four different configurations of PV modules are considered for the present study which are defined as; case A (Glass to glass PV module with duct), case B (Glass to glass PV module without duct), case C (Glass to tedlar PV module with duct), case D (Glass to tedlar PV module without duct). Further, experiments were carried out for all configurations under composite climate of New Delhi. It is found that the glass to glass PV modules with duct gives higher electrical efficiency as well as the higher outlet air temperature amongst the all four cases. The annual effect on electrical efficiency of glass to glass type PV module with and without duct is also evaluated. The annual average efficiency of glass to glass type PV module with and without duct is 10.41% and 9.75%, respectively. (author)

  2. PV-θ view of the zonal mean state of the atmosphere

    NARCIS (Netherlands)

    van Delden, A.J.; Hinssen, Y.B.L.

    2012-01-01

    The relation between zonal mean potential vorticity (PV) in potential temperature (u) coordinates and the zonal mean zonal wind in January and in July is studied. PV-anomalies are defined with respect to a reference state that is at rest with respect to the rotating earth. Two important PV-anomalies

  3. Real Time Photovoltaic Array Simulator for Testing Grid-Connected PV Inverters

    DEFF Research Database (Denmark)

    Sera, Dezso; Valentini, Massimo; Raducu, Alin

    2008-01-01

    In this paper a real time flexible PV array simulator is presented. It is a system that can simulate different PV panel arrays in specific environmental conditions. To evaluate performance of the Maximum Power Point Tracking (MPPT) of grid-connected Photovoltaic (PV) inverters only measurements...

  4. Large Scale Solar Power Integration in Distribution Grids: PV Modelling, Voltage Support and Aggregation Studies

    NARCIS (Netherlands)

    Samadi, A.

    2014-01-01

    Long term supporting schemes for photovoltaic (PV) system installation have led to accommodating large numbers of PV systems within load pockets in distribution grids. High penetrations of PV systems can cause new technical challenges, such as voltage rise due to reverse power flow during light load

  5. PV inverter test setup for European efficiency, static and dynamic MPPT efficiency evaluation

    DEFF Research Database (Denmark)

    Sera, Dezso; Teodorescu, Remus; Valentini, Massimo;

    2008-01-01

    (Denmark) on a commercial transformerless PV inverter. Thanks to the available experimental test setups, that provide the required high measuring accuracy, and the developed PV simulator, which is required for MPPT performance evaluation, PV Inverters can be pretested before being tested by accredited...

  6. Methodology for the optimal design of tansformerless grid-connected PV interters

    DEFF Research Database (Denmark)

    Koutroulis, E.; Blaabjerg, Frede

    2012-01-01

    inverter, such that the PV inverter levelised cost of the generated electricity is minimised. The proposed method constitutes a systematic design process, which is capable to explore the impact of the PV inverter configuration on the trade-off between the PV inverter manufacturing cost and the power losses...

  7. Household photovoltaic market in Xining, Qingha province, China: the role of local PV business

    Energy Technology Data Exchange (ETDEWEB)

    Ling, S.; Boardman, B. [University of Oxford (United Kingdom). Environmental Change Institute; Twidell, J. [University of Reading (United Kingdom). Dept. of Engineering; AMSET Centre, Horninghold (United Kingdom)

    2002-10-01

    This paper assesses the present and future market for household photovoltaic (PV) systems in rural Northwest China, especially from the PV commerce at Xining, Qinghai Province. This unsubsidised free market is now met by the emerging PV industry in China, which includes cell and module manufacturers, and PV system distributors and assemblers. For widespread deployment of such a renewable energy technology, the development of a local free market seems more successful than donor- or 'government subsidy'-driven programmes. Presently, there is a thriving infant PV industry in Northwest China, mostly centred in Xining. Xining-based PV sales companies have extensive networks for selling, marketing and servicing household PV systems for rural farmers and nomads. Small systems are now ordinary items on sale in local shops. Based on interviews and fieldwork observations with seven major PV sales companies in Xining, the household PV market is assessed from the present business operations of these companies. Detail of primary sources is given with the aim of archiving seminal progress in the history of photovoltaic power. The results suggest that although the household PV market will continue to grow, current government and international sponsored PV programmes can create both opportunities and barriers for the infant PV market an industry in China. (author)

  8. Models for a stand-alone PV system[Photovoltaic

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, A.D.; Soerensen, P.; Hansen, L.H.; Bindner, H.

    2000-12-01

    This report presents a number of models for modelling and simulation of a stand-alone photovoltaic (PV) system with a battery bank verified against a system installed at Risoe National Laboratory. The work has been supported by the Danish Ministry of Energy, as a part of the activities in the Solar Energy Centre Denmark. The study is carried out at Risoe National Laboratory with the main purpose to establish a library of simple mathematical models for each individual element of a stand-alone PV system, namely solar cells, battery, controller, inverter and load. The models for PV module and battery are based on the model descriptions found in the literature. The battery model is developed at UMASS and is known as the Kinetic Battery Model (KiBaM). The other component models in the PV system are based on simple electrical knowledge. The implementation is done using Matlab/Simulink, a simulation program that provides a graphical interface for building models as modular block diagrams. The non-linear behaviour of the battery, observed in the measurements, is investigated and compared to the KiBaM model's performance. A set of linear Black box models are estimated based on the battery measurements. The performance of the best linear Black box model is compared to the KiBaM model. A validation of each of the implemented mathematical model is performed by an interactive analysis and comparison between simulation results and measurements, acquired from the stand-alone PV system at Risoe. (au)

  9. Experimental comparison of PV-smoothing controllers using distributed generators

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Jay Dean; Ellis, Abraham; Denda, Atsushi; Morino, Kimio; Hawkins, John N.; Arellano, Brian; Shinji, Takao; Ogata, Takao; Tadokoro, Masayuki

    2014-02-01

    The power output variability of photovoltaic systems can affect local electrical grids in locations with high renewable energy penetrations or weak distribution or transmission systems. In those rare cases, quick controllable generators (e.g., energy storage systems) or loads can counteract the destabilizing effects by compensating for the power fluctuations. Previously, control algorithms for coordinated and uncoordinated operation of a small natural gas engine-generator (genset) and a battery for smoothing PV plant output were optimized using MATLAB/Simulink simulations. The simulations demonstrated that a traditional generation resource such as a natural gas genset in combination with a battery would smooth the photovoltaic output while using a smaller battery state of charge (SOC) range and extending the life of the battery. This paper reports on the experimental implementation of the coordinated and uncoordinated controllers to verify the simulations and determine the differences in the controllers. The experiments were performed with the PNM PV and energy storage Prosperity site and a gas engine-generator located at the Aperture Center at Mesa Del Sol in Albuquerque, New Mexico. Two field demonstrations were performed to compare the different PV smoothing control algorithms: (1) implementing the coordinated and uncoordinated controls while switching off a subsection of the PV array at precise times on successive clear days, and (2) comparing the results of the battery and genset outputs for the coordinated control on a high variability day with simulations of the coordinated and uncoordinated controls. It was found that for certain PV power profiles the SOC range of the battery may be larger with the coordinated control, but the total amp-hours through the battery-which approximates battery wear-will always be smaller with the coordinated control.

  10. The comparison of Virtual Machine Migration Performance between XEN-HVM, XEN-PV, Open-VZ, KVM-FV, KVM-PV

    Directory of Open Access Journals (Sweden)

    Igli Tafa

    2011-08-01

    Full Text Available Based on our previous experience we want to compare theperformance between five hypervisors: XEN-PV, XENHVM,Open-VZ,KVM-FV,KVM-PV We have simulated themigration of a virtual machine by using a warning failureapproach. Based on some experiments we have compared CPUConsumption, Memory Utilization, Total Migration Time andDowntime. We have also tested the hypervisor’s performance bychanging the packet’s size from 1500 byte to 32 byte. From thesetests we have concluded that Open-VZ has a bigger CPUConsumption than XEN-PV, but the Total Migration time issmaller than in XEN-PV. XEN-HVM has a worse performancethan XEN-PV, especially regarding to Downtimeparameter.KVM-FV has the worse performance but it canimprove by modifying it, so in this way we use KVM-PV whichhas approximately the same performance with Xen-HVM

  11. PV-Optitag 2 - 1. phase: Development of CO{sub 2} neutral buildings; PV-Optitag 2 - 1. etape: Udvikling af CO{sub 2} neutrale boliger

    Energy Technology Data Exchange (ETDEWEB)

    Vejsig Pedersen, P.

    2008-04-15

    An integrated PV cell-solar heating roof solution called PV Optitag was developed in close cooperation between architects and engineers to make new CO{sub 2} neutral solutions for urban development projects. A CO{sub 2} neutral rooftop apartment with PV cells in a solar-energy roof exploits an air-based PVT PV-cell solution in combination with a heat pump as well as PV cells integrated into windows. The idea behind the apartment is a zero-energy solution in new buildings or an urban development component, and the apartment has been exhibited in Orestaden, see www.soltag.net. The project gained practical experience in fluid-covered PV cells in combination with heat pumps in housing. (author)

  12. Consequences of Reducing the Cost of PV Modules on a PV Wind Diesel Hybrid System with Limited Sizing Components

    Directory of Open Access Journals (Sweden)

    Jones S. Silva

    2012-01-01

    Full Text Available The use of renewable resources for power supply in family homes has passed the stage of utopia to became a reality, with limits set by technical and economic parameters. This paper presents the results of a project originated from the initiative of a middle-class family to achieve energy independence at home. The starting point was the concept of home with “zero energy” in which the total energy available is equal to the energy consumed. The solution devised to meet the energy demand of the residence in question is a PV wind diesel hybrid system connected to the grid, with the possibility of energy storage in batteries and in the form of heating water and the environment of the house. As a restriction, the family requested that the system would represent little impact to the lifestyle and landscape. This paper aims to assess the consequences of reductions in the cost of the PV modules on the optimization space, as conceived by the software Homer. The results show that for this system, a 50% reduction in the cost of PV modules allows all viable solutions including PV modules.

  13. Monosomic Addition Lines of Flowering Chinese Cabbage (B. campestris L. ssp. chinensis var. parachinensis L. H. Bailey)-Chinese Kale (B. oleracea L. var. alboglabra L. H. Bailey)

    Institute of Scientific and Technical Information of China (English)

    WANG Xi-ne; ZHANG Cheng-he; XUAN Shu-xin; MAN Hong; LIU Hai-he; SHEN Shu-xing

    2008-01-01

    Interspecific alien addition lines have played significant roles in gene mapping, intergenomic gene transfer and chromosomal homoeological identification between closely related species. Selection of alien addition lines was conducted by karyotype analysis and morphological observation with the reference of parents. Triploid interspecies hybrid (AAC, 2n=3x=29) was obtained from Brassica campestris ssp. chinensis var. parachinensis Qinglu 9601 (tetraploid, AAAA, 2n=4x=40)×B. oleracea vat. alboglabra Baihua 9705 (diploid, CC, 2n=2x=18) by immature hybrid embryo culture in vitro. Five different alien monosomic addition lines (AA+C2, AA+C3, AA+C4, AA+C6, AA+C7) were obtained from the backcross progenies of AAC×AA. Each alien monosomic addition line has some specific morphological characters. It is feasible to obtain alien addition lines from the progenies of AAC×AA by karyotype analysis and morphological observation based on the reference of parents.

  14. Effect of 60Co γ irradiation with seed and shoot-tip of Brassica campestris L. var on its culture in vitro

    International Nuclear Information System (INIS)

    The survival rate in vitro of shoot-tips of Brassica campestris L. var from seeds irradiated by 60Co γ-rays decreased with the increase of dose. Irradiation inhibited proliferation of shoot-tip, induction of callus from cotyledons and differentiation of the callus. The age of explant contributed to the effect of irradiation in the culture. Irradiation stimulated the proliferation of shoot-tip with dose less than 50 Gy. Based on the effect of irradiation in the tissue culture, the effective dose recommended was about 200 Gy for seeds, 50-100 Gy for pre-soaked germinating seeds and 40-70 Gy for shoot-tips in vitro, respectively

  15. Nitrogen Dioxide-Induced Responses in Brassica campestris Seedlings: The Role of Hydrogen Peroxide in the Modulation of Antioxidative Level and Induced Resistance

    Institute of Scientific and Technical Information of China (English)

    MA Chun-yan; XU Xin; HAO Lin; CAO Jun

    2007-01-01

    This article investigates the responses of Brassica campestris seedlings to an acute level of nitrogen dioxide (NO2) exposure in a plant growth chamber, and examines whether pretreating plants with hydrogen peroxide (H2O2) will alleviate NO2-caused injury. Twenty-eight-day-old B. campestris plants sprayed with 10 mmol L-1 H2O2 aqueous solution (corresponding to approximate 1.0 mg H2O2 per single plant) were exposed to different concentrations of NO2 (0.25, 0.5, 1.0, and 2.0 μL L-1, respectively) for 24 h under controlled environment. To measure the plant biomass, the plants were fumigated with the same NO2 concentrations as mentioned above for 7 h per day (8.00-15.00) for 7 days. As a control, charcoal filtered air alone was applied. Data were collected on plant biomass, total chlorophyll, photosynthetic rate, stomatal conductance, nitrate and nitrate reductase (NR), antioxidative enzymes, ascorbate (ASA), and malondialdehyde (MDA),immediately after exposure. The results showed that exposure to a moderate dose of NO2 (e.g., 0.25 μL L-1) had a favorable effect on plants, and the dry weight of the above-ground part increased, whereas the exposure to high NO2 concentrations (e.g., 0.5 μL L-1 or higher) caused a reduction in the plant biomass and the total chlorophyll, when compared with the control. In addition, at 0.5 μL L-1 or higher NO2 concentrations, prominent increases in the MDA level and superoxide dismutase (SOD) and NR activities were observed. Exposure to 1 μL L-1 and higher NO2 resulted in necroses appearing on older leaves, and an increase in catalase (CAT) activity, decrease in ASA content, increased accumulation of NO3-, and reduction in photosynthesis, when compared with the controls. No changes were detected in stomatal conductance under NO2 fumigation. The pretreatment with 10 mmol L-1 H2O2 alleviated significantly NO2- caused biomass decrease and photosynthetic inhibition when compared with H2O2-untreated plants. Under NO2 fumigation, further

  16. Integrating High Penetrations of PV into Southern California: Year 2 Project Update; Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Mather, B.; Neal, R.

    2012-08-01

    Southern California Edison (SCE) is well into a five-year project to install a total of 500 MW of distributed photovoltaic (PV) energy within its utility service territory. Typical installations to date are 1-3 MW peak rooftop PV systems that interconnect to medium-voltage urban distribution circuits or larger (5 MW peak) ground-mounted systems that connect to medium-voltage rural distribution circuits. Some of the PV system interconnections have resulted in distribution circuits that have a significant amount of PV generation compared to customer load, resulting in high-penetration PV integration scenarios. The National Renewable Energy Laboratory (NREL) and SCE have assembled a team of distribution modeling, resource assessment, and PV inverter technology experts in order to investigate a few of the high-penetration PV distribution circuits. Currently, the distribution circuits being studied include an urban circuit with a PV penetration of approximately 46% and a rural circuit with a PV penetration of approximately 60%. In both cases, power flow on the circuit reverses direction, compared to traditional circuit operation, during periods of high PV power production and low circuit loading. Research efforts during year two of the five-year project were focused on modeling the distribution system level impacts of high-penetration PV integrations, the development and installation of distribution circuit data acquisition equipment appropriate for quantifying the impacts of high-penetration PV integrations, and investigating high-penetration PV impact mitigation strategies. This paper outlines these research efforts and discusses the following activities in more detail: the development of a quasi-static time-series test feeder for evaluating high-penetration PV integration modeling tools; the advanced inverter functions being investigated for deployment in the project's field demonstration and a power hardware-in-loop test of a 500-kW PV inverter implementing a

  17. Residential Solar PV Planning in Santiago, Chile: Incorporating the PM10 Parameter

    Directory of Open Access Journals (Sweden)

    Gustavo Cáceres

    2014-12-01

    Full Text Available This paper addresses an economic study of the installation of photovoltaic (PV solar panels for residential power generation in Santiago, Chile, based on the different parameters of a PV system, such as efficiency. As a performance indicator, the Levelized Cost of Energy (LCOE was used, which indicates the benefit of the facility vs. the current cost of electrical energy. In addition, due to a high level of airborne dusts typically associated with PM10, the effect of the dust deposition on PV panels’ surfaces and the effect on panel performance are examined. Two different scenarios are analyzed: on-grid PV plants and off-grid PV plants.

  18. Solar Photovoltaic Economic Development: Building and Growing a Local PV Industry, August 2011 (Book)

    Energy Technology Data Exchange (ETDEWEB)

    2011-08-01

    The U.S. photovoltaic (PV) industry is forecast to grow, and it represents an opportunity for economic development and job creation in communities throughout the United States. This report helps U.S. cities evaluate economic opportunities in the PV industry. It serves as a guide for local economic development offices in evaluating their community?s competitiveness in the solar PV industry, assessing the viability of solar PV development goals, and developing strategies for recruiting and retaining PV companies to their areas.

  19. NEW-FANGLED ASSIMILATION OF A PV-WIND ENERGY SYSTEM WITH ENHANCED EFFICIENCY

    OpenAIRE

    Y Heman*; Dr.M.SUSHAMA

    2016-01-01

    A novel integration scheme of solar photovoltaic (PV) with a large capacity doubly excited induction generator-based wind energy system is described. The proposed scheme uses both the grid- and rotor-side power converters of doubly fed induction generator to inject PV power into the grid. Thus, it renders a cost-effective solution to PV-grid integration by obviating the need for a dedicated converter for PV power processing. The system is able to feed significantly large PV power into the...

  20. Sensitivity of Rooftop PV Projections in the SunShot Vision Study to Market Assumptions

    Energy Technology Data Exchange (ETDEWEB)

    Drury, E.; Denholm, P.; Margolis, R.

    2013-01-01

    The SunShot Vision Study explored the potential growth of solar markets if solar prices decreased by about 75% from 2010 to 2020. The SolarDS model was used to simulate rooftop PV demand for this study, based on several PV market assumptions--future electricity rates, customer access to financing, and others--in addition to the SunShot PV price projections. This paper finds that modeled PV demand is highly sensitive to several non-price market assumptions, particularly PV financing parameters.

  1. Very Thin Flexible Coupled Inductors for PV Module Integrated GaN Converter

    DEFF Research Database (Denmark)

    Acanski, Milos; Ouyang, Ziwei; Popovic-Gerber, Jelena;

    2012-01-01

    proposed with more granular power processing by means of distributed maximum power point tracking (DMPPT). This is achieved by adjoining a MPPT unit to each PV module in the PV array. This paper presents a step further in the distributed power tracking approach, with a concept of very low profile power......As the PV energy penetrates into the urban area, shortcomings of the conventional centralized PV system architectures become more pronounced under the influence of urban environment with shading, soiling and orientation mismatch issues. To overcome these limitations new PV system architectures were...

  2. Overview of PV activities in Japan: current status and future prospects

    International Nuclear Information System (INIS)

    In Japan, activities for dissemination of PV systems have expanded among the national and local governments, industries, academic circles, nonprofit organizations (NPOs), and consumers ever since the Japanese Government laid out the Basic Guidelines for New Energy Introduction in 1994. Particularly, the continuous dissemination programs by the Ministry of Economy, Trade, and Industry (METI) based on the size of PV market has greatly contributed Japan PV industries and the successful creation of the initial market of PV systems. Cumulative installed PV capacity increased from 31.2 MW in 1994 to 859.6 MW in 2003, and 1 GW level is already in sight for 2004. As a result, solar cell/ module manufactures, housing industry, utilities, METI and other ministries and agencies, local governments, NPOs, end-users, etc. are actively promoting deployment of PV systems and the PV market is activated toward achieving 4,820 MW of the target capacity for 2010. The purpose of this paper is to provide an overview of the dissemination process of PV systems by sector and current status of Japan PV market and to forecast the future development to establish the self-sustainable PV market from the perspective of measures and policies, systems, the industrial structure and the PV market. (authors)

  3. A Software Tool for Optimal Sizing of PV Systems in Malaysia

    Directory of Open Access Journals (Sweden)

    Tamer Khatib

    2012-01-01

    Full Text Available This paper presents a MATLAB based user friendly software tool called as PV.MY for optimal sizing of photovoltaic (PV systems. The software has the capabilities of predicting the metrological variables such as solar energy, ambient temperature and wind speed using artificial neural network (ANN, optimizes the PV module/ array tilt angle, optimizes the inverter size and calculate optimal capacities of PV array, battery, wind turbine and diesel generator in hybrid PV systems. The ANN based model for metrological prediction uses four meteorological variables, namely, sun shine ratio, day number and location coordinates. As for PV system sizing, iterative methods are used for determining the optimal sizing of three types of PV systems, which are standalone PV system, hybrid PV/wind system and hybrid PV/diesel generator system. The loss of load probability (LLP technique is used for optimization in which the energy sources capacities are the variables to be optimized considering very low LLP. As for determining the optimal PV panels tilt angle and inverter size, the Liu and Jordan model for solar energy incident on a tilt surface is used in optimizing the monthly tilt angle, while a model for inverter efficiency curve is used in the optimization of inverter size.

  4. How PV system ownership can impact the market value of residential homes.

    Energy Technology Data Exchange (ETDEWEB)

    Klise, Geoffrey Taylor; Johnson, Jamie L.

    2014-01-01

    There are multiple ways for a homeowner to obtain the electricity generating and savings benefits offered by a photovoltaic (PV) system. These include purchasing a PV system through various financing mechanisms, or by leasing the PV system from a third party with multiple options that may include purchase, lease renewal or PV system removal. The different ownership options available to homeowners presents a challenge to appraisal and real estate professionals during a home sale or refinance in terms of how to develop a value that is reflective of the PV systems operational characteristics, local market conditions, and lender and underwriter requirements. This paper presents these many PV system ownership options with a discussion of what considerations an appraiser must make when developing the contributory value of a PV system to a residential property.

  5. Delta Power Control Strategy for Multi-String Grid-Connected PV Inverters

    DEFF Research Database (Denmark)

    Sangwongwanich, Ariya; Yang, Yongheng; Blaabjerg, Frede;

    2016-01-01

    With a still increasing penetration level of grid-connected PV systems, more advanced active power control functionalities have been introduced in certain grid regulations. A delta power constraint, where a portion of the active power from the PV panels is reserved during operation, is required...... for grid support (e.g., during frequency deviation). In this paper, a cost-effective solution to realize delta power control for grid-connected PV systems is presented, where the residential/commercial multi-string PV inverter configuration is adopted. This control strategy is a combination of Maximum...... Power Point Tracking (MPPT) and Constant Power Generation (CPG) modes. In this control scheme, one PV string operating in the MPPT mode estimates the available power, while the other PV strings regulate the total PV power by the CPG control strategy in such a way that the delta power constraint...

  6. How PV system ownership can impact the market value of residential homes

    Energy Technology Data Exchange (ETDEWEB)

    Klise, Geoffrey Taylor [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Johnson, Jamie L. [Energy Sense Finance, LLC, Punta Gorda, FL (United States)

    2014-01-01

    There are multiple ways for a homeowner to obtain the electricity generating and savings benefits offered by a photovoltaic (PV) system. These include purchasing a PV system through various financing mechanisms, or by leasing the PV system from a third party with multiple options that may include purchase, lease renewal or PV system removal. The different ownership options available to homeowners presents a challenge to appraisal and real estate professionals during a home sale or refinance in terms of how to develop a value that is reflective of the PV systems operational characteristics, local market conditions, and lender and underwriter requirements. This paper presents these many PV system ownership options with a discussion of what considerations an appraiser must make when developing the contributory value of a PV system to a residential property.

  7. Experimental comparison of two PV direct-coupled solar water heating systems with the traditional system

    International Nuclear Information System (INIS)

    Highlights: • A design approach of PV-coupled solar water heating system (SWHS) is presented. • Two different designs of PV modules are proposed and investigated. • A comparative test rig of PV-coupled SWHS and traditional SWHS is set up. • A flow rate increasing with solar irradiation is recommended. - Abstract: Simple and reliable, PV direct-coupled DC pumps are promising in solar water heating systems (SWHS). However, there is limited experimental data on the performance comparison of PV-coupled SWHS with traditional SWHS. Hence in this study, a comparative test rig is set up to measure and analyze the performance of the PV-coupled SWHS and the traditional system under the same conditions. The experimental results show that on sunny days the PV-coupled SWHS has similar daily thermal efficiency as the traditional SWHS, and slightly higher efficiency after improving the design of the PV module. Under low irradiation, the PV-coupled SWHS gains much more heat than the traditional SWHS, which indicates the potential of the PV-coupled SWHS having much higher efficiency than the traditional SWHS on cloudy days. In order to improve the performance of the PV-coupled SWHS, two different designs of PV module are proposed, and their influence on the pump startup characteristics, the flow rate profile, and the thermal efficiency of the system is investigated. It is found that the modified design of the PV module can reduce the requirement of PV cells and increase the efficiency of the system

  8. Review of Solar PV Market Development in East Africa

    DEFF Research Database (Denmark)

    Hansen, Ulrich Elmer; Pedersen, Mathilde Brix; Nygaard, Ivan

    While the diffusion of solar home systems in Kenya has been market-based for some years, the diffusion of PV in most other Sub-Saharan African countries has been driven by government and donor-supported projects aimed at serving specific needs for electricity while at the same time creating...... to varying degrees by conducive enabling frameworks comprising innovative financing schemes, exemptions from VAT and import taxes, standardised power-purchasing agreements and feed-in tariffs. Few analyses have so far been conducted on the effects of such measures. This paper aims to contribute...... to understanding these effects by reviewing the development of markets for solar PV in Kenya, Tanzania and Uganda, focusing on how the differences in market development have been explained in the literature. The paper finds that, although Tanzania and Uganda are rapidly catching up, Kenya is still leading...

  9. Reliability Assessment of Transformerless PV Inverters considering Mission Profiles

    Directory of Open Access Journals (Sweden)

    Yongheng Yang

    2015-01-01

    Full Text Available Due to the small volume and high efficiency, transformerless inverters have gained much popularity in grid-connected PV applications, where minimizing leakage current injection is mandatory. This can be achieved by either modifying the modulation schemes or adding extra power switching devices, resulting in an uneven distribution of the power losses on the switching devices. Consequently, the device thermal loading is redistributed and thus may alter the entire inverter reliability performance, especially under a long-term operation. In this consideration, this paper assesses the device reliability of three transformerless inverters under a yearly mission profile (i.e., solar irradiance and ambient temperature. The mission profile is translated to device thermal loading, which is used for lifetime prediction. Comparison results reveal the lifetime mismatches among the power switching devices operating under the same condition, which offers new thoughts for a robust design and a reliable operation of grid-connected transformerless PV inverters with high efficiency.

  10. High-Penetration PV Integration Handbook for Distribution Engineers

    Energy Technology Data Exchange (ETDEWEB)

    Seguin, Rich [Electrical Distribution Design, Blacksburg, VA (United States); Woyak, Jeremy [Electrical Distribution Design, Blacksburg, VA (United States); Costyk, David [Electrical Distribution Design, Blacksburg, VA (United States); Hambrick, Josh [Electrical Distribution Design, Blacksburg, VA (United States); Mather, Barry [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-01-01

    This handbook has been developed as part of a five-year research project which began in 2010. The National Renewable Energy Laboratory (NREL), Southern California Edison (SCE), Quanta Technology, Satcon Technology Corporation, Electrical Distribution Design (EDD), and Clean Power Research (CPR) teamed together to analyze the impacts of high-penetration levels of photovoltaic (PV) systems interconnected onto the SCE distribution system. This project was designed specifically to leverage the experience that SCE and the project team would gain during the significant installation of 500 MW of commercial scale PV systems (1-5 MW typically) starting in 2010 and completing in 2015 within SCE’s service territory through a program approved by the California Public Utility Commission (CPUC).

  11. Exploiting PV technology for basic need provision in Nigeria

    International Nuclear Information System (INIS)

    Transitional economies are confronted with ever declining standard of living and low per capita income. Development institutions around the world have come to realize the strategic importance of Sustainable Energy as a Basic Need in the development process. Despite the efforts made by emerging democracies to eradicate poverty, there are still millions of people without access to electricity. Unreliable energy supply currently presents a constant obstacle to many poverty alleviation programmes. Against this background, some states government in Nigeria are exploiting the unique advantage offered by PV technology in the provision of Basic Needs. This study appraises some of the scheme in which the authors have been heavily involved with. This paper identifies some of the strategic policies that might accelerate the successful implementation of PV technology as a poverty alleviation tool in terms of electricity provision in transitional economies. (authors)

  12. Selecting Solar: Insights into Residential Photovoltaic (PV) Quote Variation

    Energy Technology Data Exchange (ETDEWEB)

    Davidson, Carolyn [National Renewable Energy Lab. (NREL), Golden, CO (United States); Margolis, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-10-01

    Before investing in a system, a prospective PV customer must not only have initial concept 'buy in,' but also be able to evaluate the tradeoffs associated with different system parameters. Prospective customers might need to evaluate disparate costs for each system attribute by comparing multiple bids. The difficulty of making such an evaluation with limited information can create a cognitive barrier to proceeding with the investment. This analysis leverages recently available data from EnergySage, an online solar marketplace, to offer the first data-driven characterization of quote variation faced by prospective PV customers, lending early insight into the decisions customers face once they have initial buy-in.

  13. Scalable Optimization Methods for Distribution Networks with High PV Integration

    Energy Technology Data Exchange (ETDEWEB)

    Guggilam, Swaroop S.; Dall' Anese, Emiliano; Chen, Yu Christine; Dhople, Sairaj V.; Giannakis, Georgios B.

    2016-07-01

    This paper proposes a suite of algorithms to determine the active- and reactive-power setpoints for photovoltaic (PV) inverters in distribution networks. The objective is to optimize the operation of the distribution feeder according to a variety of performance objectives and ensure voltage regulation. In general, these algorithms take a form of the widely studied ac optimal power flow (OPF) problem. For the envisioned application domain, nonlinear power-flow constraints render pertinent OPF problems nonconvex and computationally intensive for large systems. To address these concerns, we formulate a quadratic constrained quadratic program (QCQP) by leveraging a linear approximation of the algebraic power-flow equations. Furthermore, simplification from QCQP to a linearly constrained quadratic program is provided under certain conditions. The merits of the proposed approach are demonstrated with simulation results that utilize realistic PV-generation and load-profile data for illustrative distribution-system test feeders.

  14. LonWorks as Fieldbus for PV-Installations; LonWorks als Feldbus fuer PV-Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Bergen, Ch. von

    2003-07-01

    The growing market for photovoltaics increasingly requires suitable quality controls covering plant operators, planners and installers, as well as the electric utilities. Additionally, the interest of the general public in the behaviour of photovoltaic (PV) plants is growing. This includes information from everyday practice. Alongside data retrieval, other themes such as the operative management of the unit and energy management become increasingly important for grid-connected PV systems. Todays measuring systems are not compatible with each other. Data communication between different PV plants with computer-aided analysis- and visualisation programmes is very complicated. LonWorks was introduced by Motorola and Toshiba in 1991. Today it leads the world market for field bus systems. With plug and play, components by several manufacturers can easily be incorporated into a LonWorks network. Today more than 3,500 companies use LonWorks technology. The goal of this project is to introduce the very popular LonWorks technology as a new standard for PV applications. The first objective was to develop a LonWorks interface for our Convert inverters and to connect them into a small network. In a second step we installed a LonWorks system at the 260 kW{sub p} PV plant 'Felsenau' in Berne, Switzerland. All 68 inverters are controlled over power line with LonWorks. The on-site PC acts as LonWorks DataServer and making remote information monitoring and data gathering possible. As soon as a functional error occurs, an alarm will be transmitted via modem to the SMSC (Short Message Service Centre). After two years of operation we can say that all expectations were fulfilled by our new system. Knowledge gained from this project has shown that LonWorks has lived up its considerable promise and can be regarded as a high-quality piece of technology. Integration into an overall system is technically very easy. To do this, however, relatively expensive software solutions have

  15. Pseudomonas syringae pv. tabaci in papaya seedlings Pseudomonas syringae pv. tabaci em plântulas de mamoeiro

    Directory of Open Access Journals (Sweden)

    Luís Otávio S. Beriam

    2006-03-01

    Full Text Available The natural occurrence of Pseudomonas syringae pv. tabaci causing leaf spot symptoms in papaya seedlings is reported. The pathogen was identified through biochemical, physiological, serological, and molecular assays and artificial inoculations in papaya plants. It was also shown that the strains were pathogenic to bean and tobacco plants. The restriction patterns obtained with Afa I, Alu I, Dde I, Hae III, Hpa II, Hinf I, Sau 3A I and Taq I of the PCR-RFLP of 16S-23S DNAr were identical to the P. s. pv. tabaci patterns. Primers corresponding to hrpL gene of P. syringae were also tested and the results grouped the papaya strains with P s. pv. tabaci. Bacterial strains were deposited at Coleção de Culturas IBSBF, Instituto Biológico, Campinas, Brazil, under access numbers 1687 and 1822.É relatada a ocorrência natural de Pseudomonas syringae pv. tabaci causando sintomas de lesões foliares em plântulas de mamoeiro. O patógeno foi identificado por meio de testes bioquímicos, fisiológicos, serológicos e moleculares, além de ensaios de patogenicidade em plantas de mamoeiro, feijoeiro e fumo. Os padrões de restrição obtidos com as enzimas Afa I, Alu I, Dde I, Hae III, Hpa II, Hinf I, Sal 3A I e Taq I, utilizando-se a técnica de PCR-RLFP da região espaçadora 16S-23S do DNA ribossômico, foram idênticos àqueles apresentados para P. s. pv. tabaci. Primers correspondentes ao gene hrpL de P. syringae foram também testados e os resultados obtidos permitiram agrupar as linhagens isoladas de mamão com P. s. pv. tabaci. Linhagens bacterianas estão depositadas na coleção de culturas IBSBF, Instituto Biológico, Campinas, sob n. 1687 e 1822.

  16. Solar PV based rural electrification in Rema rural village

    OpenAIRE

    Admasu, Alemshet Ayele

    2011-01-01

    Energy is a basic need for the overall growth and improvements of people’s living standard.But around 2 to 3 billion people in the world have no access to electric lighting. Like otherdeveloping countries the rural electrification in Ethiopia is very low and government takessome actions to promote the investment in these areas but due to economic constraints andlow level of technological advancement the growth is very low.This study focuses on solar PV based rural electrification, its impact ...

  17. Measures for diffusion of solar PV in selected African countries

    DEFF Research Database (Denmark)

    Nygaard, Ivan; Hansen, Ulrich Elmer; Mackenzie, Gordon A.;

    2015-01-01

    This paper investigates how African governments are considering supporting and promoting the diffusion of solar PV. This issue is explored by examining so-called ‘technology action plans (TAPs)’, which were main outputs of the Technology Needs Assessment project implemented in 10 African countrie...... support to: local production; financing schemes; tax exemptions; establishment and reinforcement of standards; technical training; and research and development....

  18. Pv rural electrification programme at the Bolivian high plateau

    Energy Technology Data Exchange (ETDEWEB)

    Lorenzo, E.; Aguilera, J. [Instituto de Energia Solar, ETSI Telecomunicacion, (Spain)

    1995-12-31

    Since 1988 the Institute of Solar Energy of the Universidad Politecnica de Madrid is carrying out a pv rural electrification programme at the Bolivian high plateau. This programme has been focused in three aspects: the domestic electrification, users participation and transfer technology. At present, there are about 1,500 electrified dwellings distributed in the Bolivian high plateau. We have got deep knowledge about life style and organization of the aymara Indians who are the inhabitants of the working zone. We think that this knowledge can be very useful for a large scale introduction of PV solar energy in this region. Finally, we present a new way to transfer PV technology to developing countries. Thanks to this programme a group of aymara Indians is able to manufacture charge regulators and electronic ballast to use in the PV installations of the programme. [Espanol] Desde 1988 el Instituto de Energia Solar de la Universidad Politecnica de Madrid esta llevando a cabo un programa fotovoltaico de electrificacion rural en la altiplanicie Boliviana. Este programa ha sido enfocado a tres aspectos: la electrificacion domestica, la participacion de los usuarios y la transferencia de la tecnologia. Actualmente, hay alrededor de 1500 conjuntos habitacionales electrificados distribuidos en la altiplanicie Boliviana. Hemos obtenido un profundo conocimiento del estilo de vida y de la organizacion de los indios aymara que son los habitantes de la zona de trabajo. Pensamos que este conocimiento puede ser muy util para una introduccion en gran escala de la energia solar fotovoltaica en esta region. Finalmente, presentamos una nueva forma de transferir la tecnologia fotovoltaica a paises en desarrollo. Gracias a este programa un grupo de indios aymara pueden fabricar reguladores de carga y balastros electronicos para ser usados en instalaciones fotovoltaicas del programa.

  19. Assessment of genetic diversity of Xanthomonas oryzae pv. oryzae

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    @@Bacterial blight of rice, caused by Xanthomonas oryzae pv. Oryzae(Xoo. ), is one of the major rice diseases in China. Making clear the shift of genetic diversity of the pathogen will provide important information for rice breeding. Strains collected from 11 provinces located in Southern region of the Changjiang River in China were assessed by using inoculation method and IS-PCR(Insertion Sequence-Based Polymerase Chain Reaction) analysis.

  20. Diagnostic impact of bone marrow histopathology in polycythemia vera (PV)

    OpenAIRE

    Thiele, J; Kvasnicka, H M

    2005-01-01

    The criteria of the Polycythemia Vera Study Group (PVSG), although acknowledged as the gold standard to establish the diagnosis of polycythemia vera (PV), do not regard bone marrow (BM) histopathology. Arguments include the existence of sufficient objective markers of disease and the lack of independently performed morphological studies or standardized criteria. The aim of this review is to evaluate morphological characteristics of erythrocytosis and to det...

  1. High Penetration PV: How High Can We Go?

    Energy Technology Data Exchange (ETDEWEB)

    2016-01-01

    Brochure highlighting NREL's partnership with SolarCity and Hawaiian Electric (HECO) to increase the penetration of solar photovoltaics on the electricity grid. To better understand the potential impact of transient overvoltages due to load rejection, NREL collaborated with SolarCity and HECO to run a series of tests measuring the magnitude and duration of load rejection overvoltage events and demonstrating the ability of advanced PV inverters to mitigate their impacts.

  2. Storage system requirements for grid supporting PV-power plants

    OpenAIRE

    Gavriluta, Catalin; Candela García, José Ignacio; Rocabert Delgado, Joan; Etxeberria Otadui, Ion; Rodríguez Cortés, Pedro

    2014-01-01

    Large penetration of renewable energy is currently attenuated by concerns regarding their impact on the controllability and reliability of the electrical system. As the inclusion of energy storage is to a great extent the solution to these issues, this paper proposes a methodology for approaching the calculation of the size of the energy storage to be connected to a PV power plant for providing inertia emulation, primary control, and the reduction of power fluctuation. A complete control stra...

  3. Predicatbility of windstorm Klaus; sensitivity to PV perturbations

    Science.gov (United States)

    Arbogast, P.; Maynard, K.

    2010-09-01

    It appears that some short-range weather forecast failures may be attributed to initial conditions errors. In some cases it is possible to anticipate the behavior of the model by comparison between observations and model analyses. In the case of extratropical cyclone development one may qualify the representation of the upper-level precursors described in terms of PV in the initial conditions by comparison with either satellite ozone or water-vapor. A step forward has been made in developing a tool based upon manual modifications of dynamical tropopause (i.e. height of 1.5 PV units) and PV inversion. After five years of experimentations it turns out that the forecasters eventually succeed in improving the forecast of some strong cyclone development. However the present approach is subjective per se. To measure the subjectivity of the procedure a set of 15 experiments has been performed provided by 7 different people (senior forecasters and scientists involved in dynamical meteorology) in order to improve an initial state of the global model ARPEGE leading to a poor forecast of the wind storm Klaus (24 January 2009). This experiment reveals that the manually defined corrections present common features but also a large spread.

  4. A Variable PV Broad Absorption Line and Quasar Outflow Energetics

    CERN Document Server

    Capellupo, Daniel M; Barlow, Tom A

    2014-01-01

    Broad absorption lines (BALs) in quasar spectra identify high velocity outflows that might exist in all quasars and could play a major role in feedback to galaxy evolution. The viability of BAL outflows as a feedback mechanism depends on their kinetic energies, as derived from the outflow velocities, column densities, and distances from the central quasar. We estimate these quantities for the quasar, Q1413+1143 (redshift $z_e = 2.56$), aided by the first detection of PV $\\lambda\\lambda$1118,1128 BAL variability in a quasar. In particular, PV absorption at velocities where the CIV trough does not reach zero intensity implies that the CIV BAL is saturated and the absorber only partially covers the background continuum source (with characteristic size 22.3 (cm^-2). Variability in the PV and saturated CIV BALs strongly disfavors changes in the ionization as the cause of the BAL variability, but supports models with high-column density BAL clouds moving across our lines of sight. The observed variability time of ...

  5. Pv rural electrification in Kiribati: A case study

    Energy Technology Data Exchange (ETDEWEB)

    Hurry, Suresh [Energy and Atmosphere Programme, SEED/BPPS UNDP, New York (United States)

    1995-12-31

    In collaboration with the Japan International Cooperation Agency (JICA), United Nations Development Programme (UNDP) participated in the implementation of a photovoltaic (PV) rural electrification project in Kiribati. Under this project, assistance was provided to the Kiribati Solar Energy Company (SEC) in order to enable it to provide electricity service as a micro utility in a effective manner. The assistance provided included installation of 55 PV-based solar home systems and one community system. In addition, the assistance focussed on technical training of SEC personnel on PV systems and management training on accounting, billing, spare parts inventory, etcetera. [Espanol] En colaboracion con la Japan International Cooperation Agency (JICA), el Programa de las Naciones Unidas para el Desarrollo (PNUD) participo en la puesta en practica de un proyecto de electrificacion rural fotovoltaico en Kiribati. Dentro de este proyecto, se proporciono ayuda a la Kiribati Solar Energy Company (SEC) para ponerla en condicion de suministrar el servicio electrico, en una forma efectiva, como una micro empresa electrica. La ayuda proporcionada incluyo la instalacion de 55 sistemas domesticos solares fotovoltaicos y un sistema comunitario. Adicionalmente, la ayuda se enfoco al entrenamiento tecnico del personal de SEC en sistemas fotovoltaicos y en el entrenamiento administrativo en contabilidad, facturacion, inventariado de partes de repuesto, etc.

  6. Overcoming PV grid issues in the urban areas

    Energy Technology Data Exchange (ETDEWEB)

    Ehara, T.

    2009-10-15

    This report for the International Energy Agency (IEA) made by Task 10 of the Photovoltaic Power Systems (PVPS) programme takes a look at grid issues in urban photovoltaic electricity and how to overcome them. The mission of the Photovoltaic Power Systems Programme is to enhance the international collaboration efforts which accelerate the development and deployment of photovoltaic solar energy as a significant and sustainable renewable energy option. The objective of Task 10 is stated as being to enhance the opportunities for wide-scale, solution-oriented application of photovoltaics in the urban environment. The paper discusses the goal of mainstreaming PV systems in the urban environment. In this report, PV grid interconnection issues and countermeasures based on the latest studies are identified and summarised. Appropriate and understandable information is provided for all possible stakeholders. Possible impacts and benefits of PV grid interconnection are identified, technical measures designed to eliminate negative impacts and enhance possible benefits are presented. The status of research and demonstration projects is introduced and the latest outcomes are summarised. Recommendations and conclusions based on the review process are summarised and presented.

  7. Sizing PV-wind hybrid energy system for lighting

    Directory of Open Access Journals (Sweden)

    Mustafa Engin

    2012-09-01

    Full Text Available Sizing of wind and photovoltaic generators ensures lower operational costs and therefore, is considered as an important issue. An approach for sizing along with a best management technique for a PV-wind hybrid system with batteries is proposed in this paper, in which the best size for every component of the system could be optimized according to the weather conditions and the load profile. The average hourly values for wind speed and solar radiation for Izmir, Turkey has been used in the design of the systems, along with expected load profile. A hybrid power model is also developed for battery operation according to the power balance between generators and loads used in the software, to anticipate performances for the different systems according to the different weather conditions. The output of the program will display the performance of the system during the year, the total cost of the system, and the best size for the PV-generator, wind generator, and battery capacity. Using proposed procedure, a 1.2 kWp PV-wind hybrid system was designed for Izmir, and simulated and measured results are presented.

  8. Rooftop PV system. Final technical progress report, Phase II

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    Under this four-year PV:BONUS Program, ECD and United Solar are developing and demonstrating two new lightweight flexible building integrated Photovoltaic (BIPV) modules specifically designed as exact replacements for conventional asphalt shingles and standing seam metal roofing. These modules can be economically and aesthetically integrated into new residential and commercial buildings, and address the even larger roofing replacement market. The modules are designed to be installed by roofing contractors without special training which minimizes the installation and balance of system costs. The modules will be fabricated from high-efficiency, multiple-junction a-Si alloy solar cells developed by ECD and United Solar. Under the Phase I Program, which ended in March 1994, we developed two different concept designs for rooftop PV modules: (1) the United Solar overlapping (asphalt shingle replacement) shingle-type modules and (2) the ECD metal roof-type modules. We also developed a plan for fabricating, testing and demonstrating these modules. Candidate demonstration sites for our rooftop PV modules were identified and preliminary engineering designs for these demonstrations were developed; a marketing study plan was also developed. The major objectives of the Phase II Program, which started in June 1994 was (1) to develop, test, and qualify these new rooftop modules; (2) to develop mechanical and electrical engineering specifications for the demonstration projects; and (3) to develop a marketing/commercialization plan.

  9. Modeling and Simulation for Hybrid of PV-Wind system

    Directory of Open Access Journals (Sweden)

    Maged N. F. Nashed

    2015-04-01

    Full Text Available The rising consumption rate of fossil fuels causes a significant pollution impact on the atmosphere, unwanted greenhouse gases has drawn worldwide attention towards renewable energy sources. Moreover, in recent year’s generation of electricity using the different types of renewable sources are specifically evaluated in the economical performance of the overall equipment. This paper focuses on the modeling and analysis of a Standalone Photovoltaic (PV- wind energy hybrid generation system under different conditions using MATLAB. The proposed system consists of two renewable sources i.e. wind and solar energy. Modeling of PV array and wind turbine is explained. The wind subsystem is equipped of an induction generator. In photovoltaic system, the variable DC output voltage is controlled using buck-boost converter for the MPPT. These two systems are combined to operate in parallel and the common bus collects the total energy from the wind and PV systems are uses it to the load and with change the load

  10. Role of Edible Fungi Bio-Processor in Increasing the Output of the Cultivated Agaricus Campestris%食用菌生物激活处理器在四孢蘑菇栽培中的增产效应

    Institute of Scientific and Technical Information of China (English)

    杨淑全; 刘宇鹏; 马云侠; 毛贵阳; 郜白银

    2002-01-01

    将四孢蘑菇(Agaricus campestris)用食用菌生物激活处理器制得的"双磁水"浇、喷后产量增加了40%以上,菇体硬实、菌盖厚、菌柄短粗且推迟开伞时间,鲜菇氨基酸和维生素C含量明显增多.

  11. Molecular detection of Xanthomonas oryzae pv.oryzae, Xanthomonas oryzae pv. oryzicola, and Burkholderia glumae in infected rice seeds and leaves

    Institute of Scientific and Technical Information of China (English)

    Wen; Lu; Luqi; Pan; Haijun; Zhao; Yulin; Jia; Yanli; Wang; Xiaoping; Yu; Xueyan; Wang

    2014-01-01

    The polymerase chain reaction(PCR) is particularly useful for plant pathogen detection. In the present study, multiplex PCR and SYBR Green real-time PCR were developed to facilitate the simultaneous detection of three important rice pathogens, Xanthomonas oryzae pv.oryzae, X. oryzae pv. oryzicola, and Burkholderia glumae. The unique PCR primer sets were designed from portions of a putative glycosyltransferase gene of X. oryzae pv. oryzae, an Avr Rxo gene of X. oryzae pv. oryzicola, and an internal transcribed spacer(ITS) sequence of B. glumae. Using a multiplex PCR assay, X. oryzae pv. oryzae, X. oryzae pv. oryzicola, and B. glumae were detected in one PCR reaction that contained the newly developed primer set mix. Using SYBR Green real-time PCR assays, X. oryzae pv. oryzae, X. oryzae pv. oryzicola, and B. glumae were detected at 1, 1, and 10 fg μL-1, respectively. These newly designed molecular assays are sensitive and could be reliable tools for pathogen detection and disease forecasting.

  12. Effect of clove oil on plant pathogenic bacteria and bacterial wilt of tomato and geranium

    Science.gov (United States)

    We determined the antibacterial activity of clove oil against seven different genera of plant pathogenic bacteria including Gram-negative Agrobacterium tumefaciens, Erwinia carotovora pv. carotovora, Pseudomonas syringae pv. syringae, Ralstonia solanacearum, and Xanthomonas campestris pv. pelargonii...

  13. PV-Developer. A Concept Paper. Version 4.0

    International Nuclear Information System (INIS)

    The market for Photovoltaic Energy systems is developing very rapidly with annual growth rates in the range of 20-40%. The growth creates new business opportunities for project development. The markets are immature and the competitiveness of PV is increasing, whereby it is important to develop the business concept within the next few years if the long-term aim is to become a major player in the field of PV-project development. Like in the field of wind energy, which has grown to a large-scale business area within the last decade, the long-term perspectives of photovoltaic energy will depend upon the market development, interest groups and stake holders. The solar power developers might be catalysts for high growth rates like in the wind energy field. The concern for global warming leads the international energy policies in favour of renewable energy incentives followed by the technological development of PV-equipment, which constantly improves the cost level of PV-produced electricity. The markets for PV-systems are geographically widespread and the way to implement systems goes to a large extent via financing from international governmental as well as non-governmental lateral and bilateral aid organisations. Lead times to develop projects are counted in years, and the time from the first project idea to the final commissioning of the installed plants might take 3-5 years. More specific studies of market segments and business opportunities, development of market penetration and design of strategy must be carried out. Organisation seems to be a major issue as the complexity of the projects and the project location in 3rd world countries as well as in the industrialised countries combined with high proportion of donor funding will require a high level of organisation and coordination. In general a detailed study should be made in order to create a business plan. The business plan must contain budgets, volume estimates, sensitivity analyses, organisational proposals

  14. An aquaporin PvTIP4;1 from Pteris vittata may mediate arsenite uptake.

    Science.gov (United States)

    He, Zhenyan; Yan, Huili; Chen, Yanshan; Shen, Hongling; Xu, Wenxiu; Zhang, Haiyan; Shi, Lei; Zhu, Yong-Guan; Ma, Mi

    2016-01-01

    The fern Pteris vittata is an arsenic hyperaccumulator. The genes involved in arsenite (As(III)) transport are not yet clear. Here, we describe the isolation and characterization of a new P. vittata aquaporin gene, PvTIP4;1, which may mediate As(III) uptake. PvTIP4;1 was identified from yeast functional complement cDNA library of P. vittata. Arsenic toxicity and accumulating activities of PvTIP4;1 were analyzed in Saccharomyces cerevisiae and Arabidopsis. Subcellular localization of PvTIP4;1-GFP fusion protein in P. vittata protoplast and callus was conducted. The tissue expression of PvTIP4;1 was investigated by quantitative real-time PCR. Site-directed mutagenesis of the PvTIP4;1 aromatic/arginine (Ar/R) domain was studied. Heterologous expression in yeast demonstrates that PvTIP4;1 was able to facilitate As(III) diffusion. Transgenic Arabidopsis showed that PvTIP4;1 increases arsenic accumulation and induces arsenic sensitivity. Images and FM4-64 staining suggest that PvTIP4;1 localizes to the plasma membrane in P. vittata cells. A tissue location study shows that PvTIP4;1 transcripts are mainly expressed in roots. Site-directed mutation in yeast further proved that the cysteine at the LE1 position of PvTIP4;1 Ar/R domain is a functional site. PvTIP4;1 is a new represented tonoplast intrinsic protein (TIP) aquaporin from P. vittata and the function and location results imply that PvTIP4;1 may be involved in As(III) uptake.

  15. An aquaporin PvTIP4;1 from Pteris vittata may mediate arsenite uptake.

    Science.gov (United States)

    He, Zhenyan; Yan, Huili; Chen, Yanshan; Shen, Hongling; Xu, Wenxiu; Zhang, Haiyan; Shi, Lei; Zhu, Yong-Guan; Ma, Mi

    2016-01-01

    The fern Pteris vittata is an arsenic hyperaccumulator. The genes involved in arsenite (As(III)) transport are not yet clear. Here, we describe the isolation and characterization of a new P. vittata aquaporin gene, PvTIP4;1, which may mediate As(III) uptake. PvTIP4;1 was identified from yeast functional complement cDNA library of P. vittata. Arsenic toxicity and accumulating activities of PvTIP4;1 were analyzed in Saccharomyces cerevisiae and Arabidopsis. Subcellular localization of PvTIP4;1-GFP fusion protein in P. vittata protoplast and callus was conducted. The tissue expression of PvTIP4;1 was investigated by quantitative real-time PCR. Site-directed mutagenesis of the PvTIP4;1 aromatic/arginine (Ar/R) domain was studied. Heterologous expression in yeast demonstrates that PvTIP4;1 was able to facilitate As(III) diffusion. Transgenic Arabidopsis showed that PvTIP4;1 increases arsenic accumulation and induces arsenic sensitivity. Images and FM4-64 staining suggest that PvTIP4;1 localizes to the plasma membrane in P. vittata cells. A tissue location study shows that PvTIP4;1 transcripts are mainly expressed in roots. Site-directed mutation in yeast further proved that the cysteine at the LE1 position of PvTIP4;1 Ar/R domain is a functional site. PvTIP4;1 is a new represented tonoplast intrinsic protein (TIP) aquaporin from P. vittata and the function and location results imply that PvTIP4;1 may be involved in As(III) uptake. PMID:26372374

  16. EcPV2 DNA in equine genital squamous cell carcinomas and normal genital mucosa.

    Science.gov (United States)

    Bogaert, Lies; Willemsen, Anouk; Vanderstraeten, Eva; Bracho, Maria A; De Baere, Cindy; Bravo, Ignacio G; Martens, Ann

    2012-07-01

    Squamous cell carcinoma (SCC) represents the most common genital malignant tumor in horses. Similar to humans, papillomaviruses (PVs) have been proposed as etiological agents and recently Equine papillomavirus type 2 (EcPV2) has been identified in a subset of genital SCCs. The goals of this study were (1) to determine the prevalence of EcPV2 DNA in tissue samples from equine genital SCCs, penile intraepithelial neoplasia (PIN) and penile papillomas, using EcPV2-specific PCR, (2) to examine the prevalence of latent EcPV2 infection in healthy genital mucosa and (3) to determine genetic variability within EcPV2 and to disentangle phylogenetic relationships of EcPV2 among PVs. EcPV2 DNA was detected in all but one penile SCC (15/16), in all PIN lesions (8/8) and penile papillomas (4/4). Additionally, EcPV2 DNA was demonstrated in one of two metastasized lymph nodes, one contact metastasis in the mouth, two vaginal and one anal lesion. In healthy horses, EcPV2 DNA was detected in 10% (4/39) of penile swabs but in none of vulvovaginal swabs (0/20). This study confirms the presence of EcPV2 DNA in equine genital SCCs and shows its involvement in anal lesions, a lymph node and contact metastases. Latent EcPV2 presence was also shown in normal male genital mucosa. We found that different EcPV2 variants cocirculate among horses and that EcPV2 is related to the Delta+Zeta PVs and is only a very distant relative of high-risk human PVs causing genital cancer. Thus, similar viral tropism and similar malignant outcome of the infection do not imply close evolutionary relationship.

  17. 一个新的体外快速鉴定十字花科黑腐病菌Ⅲ型效应物的报告质粒的构建%Construction of A New Reporter Plasmid to Identify the Type Ⅲ Effectors in Xanthomonas campestris in vitro

    Institute of Scientific and Technical Information of China (English)

    唐菲菲; 韩恩兴; 梁业瀛; 刘三; 姜伯乐

    2011-01-01

    The infection process of plant pathogen is a interaction between phytopathogens and host plants.Type Ⅲ secretion system and type Ⅲ effectors are closely related and pathogen virulence.Most gram-negative phytopathogens deliver the effector protein directly into the host cell through type Ⅲ secretion system,causing disease or hypersensitive reaction.In this research the adenylate cyclase gene of Bordetella pertussis was cloned into pLAFRJ which contains a promoter,yielding a new reporter plasmid pJJA which can be used to identify the type Ⅲ effectors efficiently in vitro.The promoter and signal region of XC1553 which has been identified as type Ⅲ effectors in Xanthomonas campestris pv.campestris(Xcc) was used to verify the report plasmid.The results of cAMP concentration detection assay in Brassica oleracea leaves demonstrated that the new report plasmid pJJA works well.The report plasmid provides material for further precise screening type Ⅲ effectors in Xcc.%植物病原菌侵染寄主的过程就是病原菌和寄主植物相互作用的过程。在这个相互作用过程中,Ⅲ型分泌系统和Ⅲ效应物与病原菌致病密切相关。大部分革兰氏阴性植物病原菌通过Ⅲ型分泌系统定向的把效应物蛋白传递到宿主细胞,效应物蛋白进入植物体引起致病或过敏反应。本研究将百日咳杆菌的腺苷酸环化酶基因连接至含启动子的pLAFRJ载体上,从而构建出一个新的体外快速鉴定Ⅲ型效应物的报告质粒pJ-JA,并用已鉴定为Ⅲ型效应物基因的十字花科黑腐病菌XC1553的启动子和信号区验证该报告质粒,证明这个系统是可以工作的。该报告质粒为进一步精确筛选鉴定十字花科黑腐病菌Ⅲ型效应物提供了材料。

  18. A Novel Frequency Restoring Strategy of Hydro-PV Hybrid Microgrid

    DEFF Research Database (Denmark)

    Wei, Feng; Kai, Sun; Guan, Yajuan;

    2014-01-01

    The conventional PV systems based on the voltage inverters only inject dispatched power to the utility grid when they work at a grid-connected mode in the hydro-PV hybrid microgrid. Due to the droop method employed for load sharing between generators, as well as the enormous inertia of system....... The existence of frequency steady-state error and the slow active power/frequency dynamic response are inevitable. Therefore, a novel frequency restoring strategy for the hydro-PV hybrid microgrid based on the improved hierarchical control of PV systems is proposed in this paper. The output active power of PV...... systems is controlled by an extra frequency restoring controller resided in the tertiary control level. The frequency steady-state error is eliminated through regulating and rebalancing the power flow between the hydropower and the PV system. The proposed strategy has verified through simulations...

  19. Effect of Reactive Power Management of PV Inverters on Need for Energy Storage

    DEFF Research Database (Denmark)

    Hashemi Toghroljerdi, Seyedmostafa; Østergaard, Jacob; Yang, Guangya

    2013-01-01

    Grid connected Photovoltaic (PV) systems are among the increasingly growing electric power generation units worldwide. The majority of new installations are expected to be residential PVs that are connected into distribution systems. However, the PV hosting capacity of low voltage (LV) grids...... is limited due to the voltage rise at the point of connection associated with the PV feed-in current. Reactive power management using PV inverters and using the electrical energy storage systems (EESS) are amongst the main solutions for increasing the PV hosting capacity in LV grids. In this paper, a method...... is developed in order to examine the effect of reactive power absorption by PV inverters on EESS capacity required for overvoltage prevention in LV grids. Simulations show that reactive power absorption can effectively decrease the EESS capacity....

  20. Optimal Planning Strategy for Large PV/Battery System Based on Long-Term Insolation Forecasting

    Science.gov (United States)

    Yona, Atsushi; Uchida, Kosuke; Senjyu, Tomonobu; Funabashi, Toshihisa

    Photovoltaic (PV) systems are rapidly gaining acceptance as some of the best alternative energy sources. Usually the power output of PV system fluctuates depending on weather conditions. In order to control the fluctuating power output for PV system, it requires control method of energy storage system. This paper proposes an optimization approach to determine the operational planning of power output for PV system with battery energy storage system (BESS). This approach aims to obtain more benefit for electrical power selling and to smooth the fluctuating power output for PV system. The optimization method applies genetic algorithm (GA) considering PV power output forecast error. The forecast error is based on our previous works with the insolation forecasting at one day ahead by using weather reported data, fuzzy theory and neural network(NN). The validity of the proposed method is confirmed by the computer simulations.

  1. Determining the maximum feasible amount of photovoltaics in the European transmission grid under optimal PV utilization

    Energy Technology Data Exchange (ETDEWEB)

    Cherevatskiy, Stanislav; Troester, Eckehard [Energynautics GmbH, Langen (Germany)

    2012-07-01

    In the past few years a significant growth of the number of photovoltaic (PV) systems has been observed worldwide and particularly in Europe. Increasing maturity of this technology and growing manufacturing capacities have led to a considerable decline in prices. Looking at a future possible development of installed PV capacities in Europe, the paper at hand investigates how well the available PV energy is made use of when the installed capacity of PV reaches nearly 2000 gigawatt-peak (GWp). A methodology is presented that aims at optimal placement of PV plants taking into consideration region-specific irradiation conditions in Europe and restrictions imposed by the transmission network. Additionally, a mehtod for optimized placement and dimensioning of storage systems along with their best possible operation strategy is applied for assessment of the effect on PV utilization. (orig.)

  2. A Simple and Efficient MPPT Method for Low-Power PV Cells

    Directory of Open Access Journals (Sweden)

    Maria Teresa Penella

    2014-01-01

    Full Text Available Small-size PV cells have been used to power sensor nodes. These devices present limited computing resources and so low complexity methods have been used in order to extract the maximum power from the PV cells. Among them, the fractional open circuit voltage (FOCV method has been widely proposed, where the maximum power point of the PV cell is estimated from a fraction of its open circuit voltage. Here, we show a generalization of the FOCV method that keeps its inherent simplicity and improves the tracking efficiency. First, a single-diode model for PV cells was used to compute the tracking efficiency versus irradiance. Computations were carried out for different values of the parameters involved in the PV cell model. The proposed approach clearly outperformed the FOCV method, specially at low irradiance, which is significant for powering sensor nodes. Experimental tests performed with a 500 mW PV panel agreed with these results.

  3. Designing PV Incentive Programs to Promote Performance: A Reviewof Current Practice

    Energy Technology Data Exchange (ETDEWEB)

    Barbose, Galen; Wiser, Ryan; Bolinger, Mark

    2007-06-01

    Increasing levels of financial support for customer-sited photovoltaic (PV) systems, provided through publicly-funded incentive programs, has heightened concerns about the long-term performance of these systems. Given the barriers that customers face to ensuring that their PV systems perform well, and the responsibility that PV incentive programs bear to ensure that public funds are prudently spent, these programs should, and often do, play a critical role in ensuring that PV systems receiving incentives perform well. To provide a point of reference for assessing the current state of the art, and to inform program design efforts going forward, we examine the approaches to encouraging PV system performance used by 32 prominent PV incentive programs in the U.S. We identify eight general strategies or groups of related strategies that these programs have used to address performance issues, and highlight important differences in the implementation of these strategies among programs.

  4. Fire risk related to the use of PV systems in building facades

    OpenAIRE

    Mazziotti Lamberto; Cancelliere Piergiacomo; Paduano Giuseppe; Setti Paolo; Sassi Samuele

    2016-01-01

    Nowadays the use of photovoltaic (PV) systems in buildings is not only related to the solar energy conversion into electrical one, but these PV modules or panels could also be used with aesthetic features or, even more, as thermal protection systems in building facades. Thanks to the technical development of the photovoltaic industry, PV system can easily be architectonically integrated into building construction elements such as roofs, vertical façade components, both with opaque or transpar...

  5. Optimal design of NPC and Active-NPC transformerless PV inverters

    DEFF Research Database (Denmark)

    Saridakis, Stefanos; Koutroulis, Eftichios; Blaabjerg, Frede

    2012-01-01

    Targeting at a cost-effective deployment of grid-connected PhotoVoltaic (PV) systems, this paper presents a new methodology for the optimal design of transformerless PV inverters, which are based on the Neutral Point Clamped (NPC) and the Active-Neutral Point Clamped (ANPC) topologies. The design...... optimal design methodology enables to maximize the economic benefit obtained during the lifetime period of the installed PV system....

  6. Final Technical Report: Advanced Measurement and Analysis of PV Derate Factors.

    Energy Technology Data Exchange (ETDEWEB)

    King, Bruce Hardison [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Burton, Patrick D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hansen, Clifford [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jones, Christian Birk [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-12-01

    The Advanced Measurement and Analysis of PV Derate Factors project focuses on improving the accuracy and reducing the uncertainty of PV performance model predictions by addressing a common element of all PV performance models referred to as “derates”. Widespread use of “rules of thumb”, combined with significant uncertainty regarding appropriate values for these factors contribute to uncertainty in projected energy production.

  7. Grid Support in Large Scale PV Power Plants using Active Power Reserves

    OpenAIRE

    Craciun, Bogdan-Ionut

    2014-01-01

    Photovoltaic (PV) systems are in the 3rd place in the renewable energy market, after hydro and wind power. The increased penetration of PV within the electrical power system has led to stability issues of the entire grid in terms of its reliability, availability and security of the supply. As a consequence, Large scale PV Power Plants (LPVPPs) operating in Maximum Power Point (MPP) are not supporting the electrical network, since several grid triggering events or the increased number of downw...

  8. Method for Load Sharing and Power Management in a Hybrid PV/Battery Source Islanded Microgrid

    DEFF Research Database (Denmark)

    Karimi, Yaser; Oraee, Hashem; Guerrero, Josep M.;

    2016-01-01

    This paper presents a decentralized load sharing and power management method for an islanded microgrid composed of PV units, battery units and hybrid PV/battery units. The proposed method performs all the necessary tasks such as load sharing among the units, battery charging and discharging and PV...... power curtailment with no need to any communication among the units. The proposed method is validated experimentally....

  9. Large Scale Deployment of PV Units in Existing Distribution Networks: Optimization of the Installation Layout

    OpenAIRE

    Sossan, Fabrizio; Darulová, Jana; Paolone, Mario; Kahl, Annelen; Bartlett, Stuart John; Lehning, Michael

    2016-01-01

    In fixed PV installations, the azimuth and tilt of the panels are normally chosen with the objective of maximizing the plant capacity factor. In this paper, we show that when considering distribution networks with densely clustered PV plants, there exist installation criteria other than the conventional that achieve higher net PV production without violating distribution network constraints. In particular, we formulate an optimization problem to determine the siting, sizing, azimuth and tilt ...

  10. Distributed Solar PV for Electricity System Resiliency: Policy and Regulatory Considerations (Brochure)

    Energy Technology Data Exchange (ETDEWEB)

    2014-11-01

    Distributed Solar PV systems have the potential of increasing the grid's resiliency to unforeseen events, such as extreme weather events and attacks. This paper presents the role that distributed PV can play in electric grid resiliency, introduces basic system design requirements and options, and discusses the regulatory and policy options for supporting the use of distributed PV for the purpose of increased electricity resiliency.

  11. A Hybrid Power Control Concept for PV Inverters with Reduced Thermal Loading

    OpenAIRE

    Yang, Yongheng; Wang, Huai; Blaabjerg, Frede; Kerekes, Tamas

    2014-01-01

    This letter proposes a hybrid power control concept for grid-connected Photovoltaic (PV) inverters. The control strategy is based on either a Maximum Power Point Tracking (MPPT) control or a Constant Power Generation (CPG) control depending on the instantaneous available power from the PV panels. The essence of the proposed concept lies in the selection of an appropriate power limit for the CPG control to achieve an improved thermal performance and an increased utilization factor of PV invert...

  12. Study on Fault and Isolated Condition in Two Circuit Configurations of PV-ESS Hybrid System

    OpenAIRE

    Myo Htaik; Ryoichi Hara; Hiroyuki Kita

    2012-01-01

    Most photovoltaic (PV) generation systems are connected with a utility grid and recognized as supplemental generation resources; but in some applications such as microgrid concept, a PV system works as a main resource. To improve the availability of PV systems, technological development for higher less output fluctuation in normal condition, higher fault tolerance in fault occurrence, and power demand and supply balancing in isolated condition are required. For these reasons, hybridization of...

  13. Design and Control of Charge-Pumped Reboost Converter for PV Applications

    OpenAIRE

    Hutchens, Christopher L

    2010-01-01

    Photovoltaic (PV) systems are renewable, DC sources which provide non-linear output power with respect to PV panel operating voltage or current. The majority of PV sources yield poor conversion efficiencies between available solar radiation and electrical output. Additionally, they are expensive compared to other conventional power sources. Power electronic converters are capable of harvesting the most energy from these resources due to their configurability and high-efficiency. These convert...

  14. Optimal design of orientation of PV/T collector with reflectors

    Energy Technology Data Exchange (ETDEWEB)

    Kostic, Lj.T.; Pavlovic, T.M.; Pavlovic, Z.T. [Faculty of Science and Mathematics, Department of Physics, PO Box 224, 18 000 Nis (RS)

    2010-10-15

    Hybrid conversion of solar radiation implies simultaneous solar radiation conversion into thermal and electrical energy in the PV/Thermal collector. In order to get more thermal and electrical energy, flat solar radiation reflectors have been mounted on PV/T collector. To obtain higher solar radiation intensity on PV/T collector, position of reflectors has been changed and optimal position of reflectors has been determined by both experimental measurements and numerical calculation so as to obtain maximal concentration of solar radiation intensity. The calculated values have been found to be in good agreement with the measured ones, both yielding the optimal position of the flat reflector to be the lowest (5 ) in December and the highest (38 ) in June. In this paper, the thermal and electrical efficiency of PV/T collector without reflectors and with reflectors in optimal position have been calculated. Using these results, the total efficiency and energy-saving efficiency of PV/T collector have been determined. Energy-saving efficiency for PV/T collector without reflectors is 60.1%, which is above the conventional solar thermal collector, whereas the energy-saving efficiency for PV/T collector with reflectors in optimal position is 46.7%, which is almost equal to the values for conventional solar thermal collector. Though the energy-saving efficiency of PV/T collector decreases slightly with the solar radiation intensity concentration factor, i.e. the thermal and electrical efficiency of PV/T collector with reflectors are lower than those of PV/T collector without reflectors, the total thermal and electrical energy generated by PV/T collector with reflectors in optimal position are significantly higher than total thermal and electrical energy generated by PV/T collector without reflectors. (author)

  15. Optimal Capacity Allocation of Large-Scale Wind-PV-Battery Units

    OpenAIRE

    2014-01-01

    An optimal capacity allocation of large-scale wind-photovoltaic- (PV-) battery units was proposed. First, an output power model was established according to meteorological conditions. Then, a wind-PV-battery unit was connected to the power grid as a power-generation unit with a rated capacity under a fixed coordinated operation strategy. Second, the utilization rate of renewable energy sources and maximum wind-PV complementation was considered and the objective function of full life cycle-net...

  16. Life cycle assessment study of solar PV systems: An example of a 2.7kW{sub p} distributed solar PV system in Singapore

    Energy Technology Data Exchange (ETDEWEB)

    Kannan, R.; Leong, K.C.; Osman, R.; Ho, H.K. [School of Mechanical and Aerospace Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798 (Singapore); Tso, C.P. [Faculty of Engineering and Technology, Multimedia University, Jalan Ayer Keroh Lama, 75450 Melaka (Malaysia)

    2006-05-15

    In life cycle assessment (LCA) of solar PV systems, energy pay back time (EPBT) is the commonly used indicator to justify its primary energy use. However, EPBT is a function of competing energy sources with which electricity from solar PV is compared, and amount of electricity generated from the solar PV system which varies with local irradiation and ambient conditions. Therefore, it is more appropriate to use site-specific EPBT for major decision-making in power generation planning. LCA and life cycle cost analysis are performed for a distributed 2.7kW{sub p} grid-connected mono-crystalline solar PV system operating in Singapore. This paper presents various EPBT analyses of the solar PV system with reference to a fuel oil-fired steam turbine and their greenhouse gas (GHG) emissions and costs are also compared. The study reveals that GHG emission from electricity generation from the solar PV system is less than one-fourth that from an oil-fired steam turbine plant and one-half that from a gas-fired combined cycle plant. However, the cost of electricity is about five to seven times higher than that from the oil or gas fired power plant. The environmental uncertainties of the solar PV system are also critically reviewed and presented. (author)

  17. Spectrally-Selective Photonic Structures for PV Applications

    Directory of Open Access Journals (Sweden)

    Benedikt Bläsi

    2010-01-01

    Full Text Available We review several examples of how spectrally-selective photonic structures may be used to improve solar cell systems. Firstly, we introduce different spectrally-selective structures that are based on interference effects. Examples shown include Rugate filter, edge filter and 3D photonic crystals such as artificial opals. In the second part, we discuss several examples of photovoltaic (PV concepts that utilize spectral selectivity such as fluorescence collectors, upconversion systems, spectrum splitting concepts and the intermediate reflector concept. The potential of spectrally selective filters in the context of solar cells is discussed.

  18. Silicon shortage: supply constraints limit PV growth until 2008

    Energy Technology Data Exchange (ETDEWEB)

    Flynn, H.; Bradford, T. [Prometheus Inst. (United States)

    2006-10-01

    It is argued that a shortage of refined (polycystalline) silicon will curtail the expansion of the solar photovoltaics industry until about 2008. At present, 94% of PV cells produced worldwide use refined silicon. The problem has arisen because the traditional source, scrap silicon from the electronics industry, is no longer available in sufficient quantities - demand has outstripped supply. Although plans are in place to double the present supply of silicon over the next four years, doubts are expressed over the likelihood of this happening. Currently, there are only seven big companies producing the silicon - production figures for these companies are given. (author)

  19. Design of Cuk Converter Powered by PV Array

    Directory of Open Access Journals (Sweden)

    S. Jayalalitha

    2013-06-01

    Full Text Available This study presents PV power based cuk converter for dc load application. The maximum power from the sun radiation is obtained by sun tracking and Maximum Power Point Tracking (MPPT. The sun tracking is implemented by the stepper motor control and MPPT is implemented by the Cuk converter and the load voltage is maintained constant irrespective of the variation in solar power. This technique improves the dynamic and steady state characteristics of the system. The simulation was done in MATLAB simulink and the experiments are carried out and the results are presented.

  20. INFLUENCE OF PV PENETRATION IN SAUDI DISTRIBUTION GRID

    Directory of Open Access Journals (Sweden)

    ESSAM A. AL-AMMAR

    2012-08-01

    Full Text Available Ever increasing power demand around the global urged countries to find out other techniques of generation and power grids with higher efficiency and lower cost comparing with the existing ones. Solarenergy is an effective alternative source of electricity which can be used instead of coal and other traditional resources. The photovoltaic distributed generation is a very useful choice since it combines the advantages of smart grid and those of solar energy. It is recommended that the optimized algorithm for optimal size andlocation of PV distributed generators in Grid and its implementation on specific substation network of Riyadh area.

  1. The effect of sandstorms on PV arrays and components

    Energy Technology Data Exchange (ETDEWEB)

    Thornton, J P

    1992-03-01

    Photovoltaic (PV) systems deployed in desert areas are exposed to wind-blown particles during most of their lifetimes. Here I describe the characteristics of wind-blown particles and with their effect on exposed surfaces. I provide insights for use in array design to minimize the effects of exposure and keep system costs as low as possible. Finally, I present some data describing the exposure of polymer-encapsulated arrays to both field and laboratory wind-blown sand environments, and I present evidence that an encapsulated or soft'' array has a higher abrasion resistance and, therefore, a much higher probability of surviving a severe sand environment.

  2. Weather modeling and forecasting of PV systems operation

    CERN Document Server

    Paulescu, Marius; Gravila, Paul; Badescu, Viorel

    2012-01-01

    In the past decade, there has been a substantial increase of grid-feeding photovoltaic applications, thus raising the importance of solar electricity in the energy mix. This trend is expected to continue and may even increase. Apart from the high initial investment cost, the fluctuating nature of the solar resource raises particular insertion problems in electrical networks. Proper grid managing demands short- and long-time forecasting of solar power plant output. Weather modeling and forecasting of PV systems operation is focused on this issue. Models for predicting the state of the sky, nowc

  3. Intelligent control of PV system on the basis of the fuzzy recurrent neuronet*

    Science.gov (United States)

    Engel, E. A.; Kovalev, I. V.; Engel, N. E.

    2016-04-01

    This paper presents the fuzzy recurrent neuronet for PV system’s control. Based on the PV system’s state, the fuzzy recurrent neural net tracks the maximum power point under random perturbations. The validity and advantages of the proposed intelligent control of PV system are demonstrated by numerical simulations. The simulation results show that the proposed intelligent control of PV system achieves real-time control speed and competitive performance, as compared to a classical control scheme on the basis of the perturbation & observation algorithm.

  4. Estimation of Maximum Allowable PV Connection to LV Residential Power Networks

    DEFF Research Database (Denmark)

    Demirok, Erhan; Sera, Dezso; Teodorescu, Remus

    2011-01-01

    Maximum photovoltaic (PV) hosting capacity of low voltage (LV) power networks is mainly restricted by either thermal limits of network components or grid voltage quality resulted from high penetration of distributed PV systems. This maximum hosting capacity may be lower than the available solar...... potential of geographic area due to power network limitations even though all rooftops are fully occupied with PV modules. Therefore, it becomes more of an issue to know what exactly limits higher PV penetration level and which solutions should be engaged efficiently such as over sizing distribution...

  5. Precursor Report of Data Needs and Recommended Practices for PV Plant Availability Operations and Maintenance Reporting.

    Energy Technology Data Exchange (ETDEWEB)

    Hill, Roger R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Photovoltaic and Distributed Systems Integration; Klise, Geoffrey Taylor [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Photovoltaic and Distributed Systems Integration; Balfour, John R. [High Performance PV, Phoenix, AZ (United States)

    2015-01-01

    Characterizing the factors that affect reliability of a photovoltaic (PV) power plant is an important aspect of optimal asset management. This document describes the many factors that affect operation and maintenance (O&M) of a PV plant, identifies the data necessary to quantify those factors, and describes how data might be used by O&M service providers and others in the PV industry. This document lays out data needs from perspectives of reliability, availability, and key performance indicators and is intended to be a precursor for standardizing terminology and data reporting, which will improve data sharing, analysis, and ultimately PV plant performance.

  6. In-depth analysis on R and D investment and strategy on PV in South Korea

    International Nuclear Information System (INIS)

    Photovoltaics (PV) is an eco-friendly and green technology, as a renewable energy source, with the aim of minimizing carbon dioxide emission into the atmosphere. The Korean government has financed various domestic installations as well as research and development (R and D) programs to enter and develop a lead in the worldwide PV market. In this study, R and D investments in the area of PV are analyzed in terms of the respective ministry, performer, research characteristics, PV materials and output levels in detail. The Korean government in the Fiscal year (FY) 2010 provided $178 million dollars from R and D funds for PV development. 74% of the R and D funds in the context of PV has been invested by the Ministry of Knowledge Economy (MKE). Expenditures for R and D programs in terms of PV are mainly funded by small-medium companies (40%), and the portion of the R and D investment in crystalline silicon solar cells is the highest in terms of materials. In spite of the high levels of R and D investment in PV, the output for commercialization was relatively lower compared to the R and D input in FY 2009–2010. With these results, we suggested to develop various solutions to improve the R and D investment efficiency for PV technology in Korea

  7. The performance of a combined solar photovoltaic (PV) and thermoelectric generator (TEG) system

    DEFF Research Database (Denmark)

    Bjørk, Rasmus; Nielsen, Kaspar Kirstein

    2015-01-01

    The performance of a combined solar photovoltaic (PV) and thermoelectric generator (TEG) system is examined using an analytical model for four different types of commercial PVs and a commercial bismuth telluride TEG. The TEG is applied directly on the back of the PV, so that the two devices have...... efficiency of the TEG. For c-Si, CIGS and CdTe PV cells the combined system produces a lower power and has a lower efficiency than the PV alone, whereas for an a-Si cell the total system performance may be slightly increased by the TEG....

  8. Pyranometers and Reference Cells: Part 2: What Makes the Most Sense for PV Power Plants?; Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Meydbray, J.; Riley, E.; Dunn, L.; Emery, K.; Kurtz, S.

    2012-10-01

    As described in Part 1 of this two-part series, thermopile pyranometers and photovoltaic (PV) reference cells can both be used to measure irradiance; however, there are subtle differences between the data that are obtained. This two-part article explores some implications of uncertainty and subtleties of accurately measuring PV efficiency in the field. Part 2 of the series shows how reference cells can be used to more confidently predict PV performance, but how this could best be accomplished if historic irradiance data could be available in PV-technology-specific formats.

  9. Calculation Method and Analysis for the Annual Power Generation of PV Façades in China

    Institute of Scientific and Technical Information of China (English)

    Shen Xu; ZhongMing Hu; Jian Kang; Wei Liao; Jing Huang

    2014-01-01

    The application of PV façades emerges greatly in recent years and however its calculation methods and analysis remains insufficient under the weather conditions of China. In such demand, this paper investigates PV façade in terms of PV electricity generation in different arrangements and weather conditions of four major cities in China. The calculation models for PV façade are developed and validated by comparing the results with the measured data from the field experiments. A parametric study is carried out to provide a reference for the optimal design of the PV façades. The results show that with various cities, building orientations, building forms, materials and arrangements of PV modules, there is a distinct difference in the electrical output energy of PV façades. Weather conditions play a very important role in terms of PV generation performance of PV façades.

  10. Effect of the Antisense BcMF12 Driven by the BcA9 Promoter on Gene Silencing in Brassica campestris L. ssp. chinensis

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The study analyzed the silencing of BcMF12 gene regulated by BcA9 promoter in the transgenic pakchoi and confirmed the effect of antisense BcMF12 gene on the pollen development. A conserved BcMF12 gene fragment was amplified from the cDNA of flower buds in pakchoi (Brassica campestris L. ssp. chinensis, syn. B. rapa L. ssp. chinensis) and was fused to the anther specific BcA9 promoter. The plant antisense expression vector was constructed and then introduced into pakchoi via Agrobacterium-mediated transformation. The transgenic plants were screened by antibiotics and molecular analysis. PCR and Southern blot revealed that the antisense BcMF12-GUS fusion gene regulated by BcA9 promoter was integrated into transgenic plants. Northern blot suggested that the expression of BcMF12 gene was down-regulated significantly. The pollen germination rate of transgenic plants with antisense BcMF12 gene decreased as compared with that of the control plants. The expression of the gene BcMF12 related to the pollen development was inhibited by the antisense BcMF12 driven by BcA9 promoter, which consequently affected the pollen development in pakchoi.

  11. Effect of Mentha spicata L. and Artemisia campestris extracts on the shelf life and quality of vacuum-packed refrigerated sardine (Sardina pilchardus) fillets.

    Science.gov (United States)

    Houicher, Abderrahmane; Kuley, Esmeray; Bendeddouche, Badis; Ozogul, Fatih

    2013-10-01

    The present study investigated the effects of ethanolic extracts obtained from Mentha spicata and Artemisia campestris on the shelf life and the quality of vacuum-packed sardine fillets stored at 3 ± 1°C for a period of 21 days. The three groups were tested were VC, control group; VM, group treated with 1 % mint extract; and VA, group treated with 1 % artemisia extract. The observed shelf life of sardine fillets was 10 days for control samples, whereas the combination of vacuum packaging with mint and artemisia extracts extended the product's shelf life to 17 days. Among the chemical indices determined, the thiobarbituric acid-reactive substances values were significantly lower in VM samples. Total volatile base nitrogen was maintained at low levels in VA samples until 17 days of chilled storage. Results of aerobic plate counts and coliform counts showed the existence of a reduced growth in VA group, whereas lactic acid bacteria did not show a significant difference among groups. Natural extract treatments combined with vacuum packaging showed lower microbiological and chemical indices, indicating that the presence of phenolic compounds in mint and artemisia extracts and the removal of oxygen in the pack retarded lipid oxidation and reduced the growth of microorganisms, which resulted in preventing spoilage and extending the product's shelf life. PMID:24112571

  12. Evaluation of physiological, growth and yield responses of a tropical oil crop (Brassica campestris L. var. Kranti) under ambient ozone pollution at varying NPK levels

    International Nuclear Information System (INIS)

    A field study was conducted to evaluate the impact of ambient ozone on mustard (Brassica campestris L. var. Kranti) plants grown under recommended and 1.5 times recommended NPK doses at a rural site of India using filtered (FCs) and non-filtered open top chambers (NFCs). Ambient mean O3 concentration varied from 41.65 to 54.2 ppb during the experiment. Plants growing in FCs showed higher photosynthetic rate at both NPK levels, but higher stomatal conductance only at recommended NPK. There were improvements in growth parameters and biomass of plants in FCs as compared to NFCs at both NPK levels with higher increments at 1.5 times recommended. Seed yield and harvest index decreased significantly only at recommended NPK in NFCs. Seed quality in terms of nutrients, protein and oil contents reduced in NFCs at recommended NPK. The application of 1.5 times recommended NPK provided protection against yield loss due to ambient O3. - NPK level above recommended alleviates the adverse effects of ambient ozone on a tropical mustard cultivar

  13. Molecular cloning and characterization of a novel pollen predominantly membrane protein gene BcMF12 from Brassica campestris ssp. chinensis.

    Science.gov (United States)

    Song, Jianghua; Zhang, Lixin; Cao, Jiashu

    2009-11-01

    A novel membrane protein gene, BcMF12, was isolated from Chinese cabbage (Brassica campestris L. ssp. chinensis Makino) using rapid amplification of the cDNA ends based on a pollen-specific cDNA fragment (DN237936). The cDNA was 1,155 bp in length with an open reading frame of 894 bp capable of encoding a putative polypeptide of 297 amino acids with an estimated molecular mass of 34.6 kDa and a predicted isoelectric point of 9.6. Comparative and bioinformatics analyses revealed that BcMF12 showed high similarities with some membrane protein sequences previously published in the public database and contained six highly conserved transmembrane domains corresponding to six highly hydrophobic regions. This indicates that BcMF12 may be a putative membrane protein. RNA gel blot analysis indicated that the transcripts of BcMF12 were abundant in the flower bud, flower and anther, but not detected in the root, stem, leaf and pistil. Moreover, the BcMF12 transcripts were detectable at the late stages of pollen development. Morphological investigations of pollen from the BcMF12 antisense transgenic plants showed that most of pollen grains of transgenic plants were abnormal. These results strongly suggest that BcMF12 is a novel pollen-preferentially membrane protein which play an important role during the pollen development in Chinese cabbage.

  14. Production of intergeneric allotetraploid between autotetraploid non-heading Chinese cabbage (Brassica campestris ssp. chinensis Makino and autotetraploid radish (Raphanus sativus L.

    Directory of Open Access Journals (Sweden)

    Sun Cheng-Zhen

    2014-03-01

    Full Text Available Intergeneric hybrids between non-heading Chinese cabbage (Brassica campestris ssp. chinensis Makino; 2n = 4x = 40 and radish (Raphanus sativus L.; 2n = 4x = 36 were obtained through ovary culture and embryo rescue. Some hybrid embryos (0.11 per ovary were produced, but only 4 of them germinated. As most hybrid embryos failed to develop into plantlets directly, plants were regenerated by inducing shoots on the cultured cotyledon and inducing roots on the root induction medium. All hybrid plants were morphologically uniform. They resembled the non-heading Chinese cabbage in the long-lived habit, the plant status, the vernalization requirement and the petiole color, while the petiole shape, leaf venation pattern and flowers were more similar to those of radish. Upon examination of the flowers, these were found to have normal pistil, but rudimentary anthers with non-functional pollen grains. The somatic chromosome number of F1 plants was 38. Analysis of SSR banding patterns provided additional confirmation of hybridity.

  15. Activation of glycerol metabolism in Xanthomonas campestris by adaptive evolution to produce a high-transparency and low-viscosity xanthan gum from glycerol.

    Science.gov (United States)

    Wang, Zichao; Wu, Jianrong; Zhu, Li; Zhan, Xiaobei

    2016-07-01

    Many studies have focused on using crude glycerol from biodiesel to obtain valuable products, but few of these studies have focused on obtaining polysaccharides. A mutant strain of Xanthomonas campestris CCTCC M2015714 that could use glycerol to produce high-transparency and low-viscosity xanthan gum was obtained by adaptive evolution, and the yield of xanthan gum reached 11.0g/L. We found that transcriptional levels of genes related to glycerol metabolism (glpF, glpK, glpD, and fbp) in the mutant strain were all higher than those from the parent strain. Using 5g/L sucrose or glucose as starter substrate, cell growth time decreased from 36h to 24h and xanthan gum yield increased. Moreover, the mutant strain can tolerate high titer glycerol, and its activity was not affected by the impurities in crude glycerol. All these results proved that crude glycerol from biodiesel industries can be used for xanthan gum production. PMID:27030959

  16. Differential Expression Analysis of Genic Male Sterility A/B Lines in Chinese Cabbage-Pak-Choi(Brassica Campestris ssp. chinensis Makino)

    Institute of Scientific and Technical Information of China (English)

    WANG Yong-qin; CAO Jia-shu; FU Qing-gong; YU Xiao-lin; YE Wan-zhi; XIANG Xun

    2003-01-01

    To determine differential expression of genic male sterility A/B lines in Chinese cabbage-pakchoi (Brassica campestris ssp. chinensis Makino var. communis Teen et Lee), we used the RNA fingerprinting technique, cDNA-AFLP analysis, in different developmental stages and different tissues. While no obvious differential expressions were observed in rosette leaves, florescence leaves, and scapes, some differential expressions were found in alabstrums of A/B lines and among leaves, scapes and alabstrums. We analyzed the alabstrums collected in different developmental stages with 10 primer combinations. We got a unique band between middle size alabstrums and large alabstrums in B line in one of the ten pair primers, and in another one pair, one band reflecting a higher gene-expression level in A line than that in B line was obtained. No unique bands were found with the other primer combinations. The bands reflecting different gene-expression level were confirmed by Northern hybridization. The results indicated that cDNA-AFLP was a suitable tool for studying differential expression of genic male sterility in plants. SDS-polyacrylamide gel electrophoresis patterns of soluble proteins further verified the difference in A/B lines.

  17. Bioaccumulation and translocation of cadmium in cole (Brassica campestris L.) and celery (Apium graveolens) grown in the polluted oasis soil,Northwest of China

    Institute of Scientific and Technical Information of China (English)

    Yiming Yang; Zhongren Nan; Zhuanjun Zhao; Zhaowei Wang; Shengli Wang; Xia Wang; Wangqiang Jin; Cuicui Zhao

    2011-01-01

    A pot experiment was conducted to study the bioaccumulation and translocation of cadmium (Cd) in cole (Brassica campestris L.) and celery (Apium graveolens) grown in the Cd-polluted oasis soil,Northwest of China.The results showed that Cd in the unpolluted oasis soil was mainly bound to carbonate fraction (F2) and Fe-Mn oxide fraction (F3).However,marked change of Cd fractions was observed with increasing soil Cd concentrations,in which the concentration of Cd in F1 (exchangeable fraction),F2 and F3 increased significantly (p < 0.001 for F1,F2 and F3).The growth of cole and celery could be facilitated by low concentrations of Cd,but inhibited by high concentrations.The correlation analysis between the fraction distribution coefficient of Cd in the soil and Cd concentration accumulated in the two vegetables showed that Cd in FI in the soil made the greatest contribution on the accumulation of Cd in the two vegetables.The high bio-concentration factor and the translocation factor of Cd in both cole and celery were observed,and Cd had higher accumulation in the edible parts of the two vegetables.Therefore,both cole and celery grown in Cd-polluted oasis soil have higher risk to human health.And the two vegetables are not suitable to be cultivated as vegetables consumed by human in the Cd-polluted oasis soil.

  18. Promotion by 5-Aminolevulinic Acid of Germination of Pakchoi (Brassica campestris ssp. chinensis var. communis Tsen et Lee) Seeds Under Salt Stress

    Institute of Scientific and Technical Information of China (English)

    Liang-Ju WANG; Wei-Bing JIANG; Hui LIU; Wei-Qin LIU; Lang KANG; Xi-Lin HOU

    2005-01-01

    The seed germination and seedling growth of pakchoi (Brassica campestris ssp. chinensis var.communis Tsen et Lee cv. Hanxiao) were not significantly inhibited until the concentration of NaCl was increased to150 mmol/L. Treatment of pakchoi seeds with exogenous 5-aminolevulinic acid (ALA), at concentrations ranging from 0.01 to 10.00 mg/L, promoted seed germination when seeds were stressed by salinity, whereas levulinic acid (LA), an inhibitor of ALA dehydrase, significantly inhibited seed germination and seedling growth, suggesting that metabolism of ALA into porphyrin compounds was necessary for seed germination and seedling growth. Determination of respiratory rate during seed germination showed that ALA increased seed respiration under both normal conditions and salt stress. Furthermore, salt stress decreased levels of endogenous ALA, as well as heme, in etiolated seedlings. More salt-tolerant cultivars of pakchoi contained higher relative levels of endogenous ALA and heme under conditions of salt stress.These results indicate that salt stress may inhibit the biosynthesis of endogenous ALA and then heme,which is necessary for seed germination, and treatment of seeds with exogenous ALA prior to germination may be associated with the biosynthesis of heme.

  19. Analysis of Brassica campestris L.ssp.chinensis (L.) Makino var.tai-tsai Hort Karyotype%薹菜的核型分析

    Institute of Scientific and Technical Information of China (English)

    宋廷宇; 韩文妍; 吴春燕; 宋述尧; 何启伟

    2012-01-01

    The chromosome number and kapyotype analysis of Tai-tsai [ Brassica campestris L. ssp. chinensis ( L.) Makino var. tai-tsai Hort ] were studied by using root-tip squashing method in order to obtain accurate cytogenetic information. The results showed that the chromosome number of Tai-tsai diploids is 2n=20, and its karyotype formula is K (In ) =2X=20=7M+2T+St, the composition of relative length of chromosome is 2n=20=2L+4M2+4S, and the chromosome karyotype was 2A.%采用根尖压片法对薹菜进行染色体数目和核型分析.结果表明:薹菜为二倍体,染色体数2n=20,核型公式为K(2n)=2X=20=7M+2T+St,染色体相对长度组成为2n=20=2L+4M2+4S,染色体组型为2A型.

  20. Sizing and Simulation of PV-Wind Hybrid Power System

    Directory of Open Access Journals (Sweden)

    Mustafa Engin

    2013-01-01

    Full Text Available A sizing procedure is developed for hybrid system with the aid of mathematical models for photovoltaic cell, wind turbine, and battery that are readily present in the literature. This sizing procedure can simulate the annual performance of different kinds of photovoltaic-wind hybrid power system structures for an identified set of renewable resources, which fulfills technical limitations with the lowest energy cost. The output of the program will display the performance of the system during the year, the total cost of the system, and the best size for the PV-generator, wind generator, and battery capacity. Security lightning application is selected, whereas system performance data and environmental operating conditions are measured and stored. This hybrid system, which includes a PV, wind turbine, inverter, and a battery, was installed to supply energy to 24 W lamps, considering that the renewable energy resources of this site where the system was installed were 1700 Wh/m2/day solar radiation and 3.43 m/s yearly average wind speed. Using the measured variables, the inverter and charge regulator efficiencies were calculated as 90% and 98%, respectively, and the overall system’s electrical efficiency is calculated as 72%. Life cycle costs per kWh are found to be $0.89 and LLP = 0.0428.