WorldWideScience

Sample records for camada limite noturna

  1. Camada limite noturna sobre área de pastagem na Amazônia Nocturnal boundary layer over an Amazonian pasture area

    Directory of Open Access Journals (Sweden)

    Theomar Trindade de Araújo Tiburtino Neves

    2011-12-01

    Full Text Available Neste trabalho foram discutidas as características da Camada Limite Noturna (CLN e o regime turbulento predominante, durante a campanha DRY-to-WET, período de transição seco para chuvoso (setembro a novembro do experimento RaCCI/LBA 2002. Foi utilizado um sítio de pastagem (Faz. Nossa Senhora Aparecida - 10°45'S, 62°21'W, 290 m na região de Ouro Preto D'Oeste - RO, com medidas de radiossonda (RS, balão cativo (BC, estação meteorológica automática (EMA e de equipamento de sensoriamento remoto (SODAR. A determinação do regime turbulento ocorreu através do parâmetro de Monin-Obukhov. As alturas da CLN obtidas por várias técnicas (RS, BC e SODAR, que variaram de 156,3 ± 57,9 m ao pôr-do-sol a 301,0 ± 124,5 m no início da manhã do dia seguinte, apresentaram semelhança com resultados já obtidos na estação seca da mesma região. Entretanto a característica da estabilidade atmosférica foi similar a situações obtidas na estação úmida. Ou seja, durante o período de transição entre as estações seca e chuvosa, a atmosfera não fica totalmente estabelecida apresentando características tanto da estação seca (por exemplo os valores da altura da CLN como da úmida (características da estabilidade.This paper discuss the characteristics of the nocturnal boundary layer (NBL and the prevailing turbulent regime during the campaign DRY-to-WET, dry to wet season transition period (September-November of RaCCI/LBA 2002. Measurements of radiosonde (RS, tethered balloon (TB, automatic weather station (AWS and SODAR (remote sensing device were made over the pasture site (Faz. Nossa Senhora Aparecida - 10 ° 45'S, 62 ° 21'W, 290 m in the region of Ouro Preto D'Oeste - RO. The turbulent flow regime was determined using the Monin-Obukhov parameter. The NBL heights (RS, BC and SODAR, ranging from 156.3 ± 57.9 m at sunset up to 301.0 ± 124.5 m on the early morning of the next day, showed similarity with data already obtained during

  2. Termografia Aplicada à Visualização de Transição de Camada Limite em Aerofólios

    Directory of Open Access Journals (Sweden)

    Jorge Henrique Bidinotto

    2016-03-01

    Full Text Available A indústria aeronáutica tem grande interesse no estudo dos fluxos aerodinâmicos laminares, uma vez que produzem força de arrasto reduzida, resultando em economia de combustível nas aeronaves. Esse tipo escoamento em torno de superfícies aerodinâmicas e sua transição a turbulento torna-se, portanto, importante para o projeto aeronáutico e validação de modelos de Dinâmica dos Fluidos Computacional (CFD. No entanto, tal determinação apresenta dificuldades experimentais, muitas vezes relacionadas com métodos invasivos, que podem influenciar a camada limite do escoamento na superfície, tornando os dados não-representativos. Este artigo apresenta uma metodologia para determinar a transição da camada limite de laminar a turbulento usando câmeras de imageamento infravermelho de alta sensibilidade. Este método baseia-se no fato de que uma diferença de temperatura na superfície do perfil aerodinâmico sob escoamento laminar e turbulento é induzida por uma diferença na troca de calor entre os dois regimes: a troca de calor é maior em escoamentos turbulentos e pode ser detectada por estas câmeras. A principal vantagem deste método está no fato de que é não-invasivo e, portanto, fornece dados experimentais mais consistentes a fim de validar modelos teóricos com melhor precisão. O trabalho baseia-se em uma apresentação teórica dos conceitos aplicados e ensaios em túnel de vento conduzidos no Laboratório de Aerodinâmica da Escola de Engenharia de São Carlos - USP, por membros desta instituição, em conjunto com pesquisadores da Bombardier Aviation e Universidade Federal de São Carlos - UFSCar.

  3. Um Estudo Comparativo Entre Coeficientes de Difusão Verticais na Simulação da Dispersão de Poluentes em uma Camada Limite Convectiva

    Directory of Open Access Journals (Sweden)

    Maria de Fatima Silva Leite

    Full Text Available Resumo Este trabalho apresenta um estudo comparativo entre diferentes coeficientes de difusão verticais aplicados em um modelo de dispersão para determinação da concentração de poluentes atmosféricos em uma camada limite convectiva. O modelo de dispersão é uma solução semi-analítica da equação de difusão-advecção tridimensional e estacionária, sendo que os resultados das simulações foram confrontados com dados experimentais da literatura. As melhores performances foram obtidas com o coeficiente de difusão proveniente da teoria estatística de Taylor e propriedades espectrais. Entretanto, resultados menos satisfatórios foram obtidos com a parametrização Asymmetric Convective Model version 2 (ACM2, muito usada como uma das opções para camada limite atmosférica no modelo de mesoescala Weather Research and Forecasting (WRF.

  4. Enurese noturna monossintomática Monosymptomatic nocturnal enuresis

    Directory of Open Access Journals (Sweden)

    Rejane de P. Meneses

    2001-06-01

    Full Text Available OBJETIVO: a enurese noturna monossintomática (ENM ocupa papel de destaque na prática pediátrica, pela alta freqüência, pelo impacto psicossocial e por ser assunto controverso em relação à etiologia e ao tratamento. O principal interesse deste trabalho é mostrar que a ENM é uma entidade clínica bem individualizada. A enurese noturna pode ser sintoma de distúrbio miccional cuja abordagem terapêutica é completamente diferente. MÉTODOS: Encontramos na literatura uma enorme quantidade de publicações, mas procuramos selecionar, para esta revisão, as publicações clássicas e as mais recentes, de autores internacionalmente reconhecidos como estudiosos neste tema; além disso, trazemos a experiência acumulada ao longo de 13 anos no Centro de Nefrologia Pediátrica do Paraná - Unidade de Distúrbios Miccionais. RESULTADOS: A falta de consenso internacional bem definido quanto a conceituação, terminologia e classificação dificulta a avaliação dos inúmeros estudos publicados na literatura. A individualização da entidade clínica ENM é o ponto de partida fundamental para uma orientação adequada do paciente. A enurese não é um mal da civilização moderna e encontra-se presente na maioria das sociedades, dando oportunidade às mais diversas interpretações e propostas de tratamento (1. Há consenso em relação ao prejuízo da auto-estima em crianças enuréticas e, portanto, em relação ao benefício de seu tratamento. CONCLUSÕES: A enurese noturna continua sendo um grande segredo de família, e muitas crianças permanecem sem orientação e tratamento, sofrendo por falta de compreensão e tendo sua auto-estima atingida. A ENM deve ser ativamente pesquisada na ocasião da consulta pediátrica. Um interrogatório detalhado sobre hábitos e qualidade da micção, antecedentes de infecção urinária e exame físico minucioso, permite descartar outros diagnósticos. A ENM é um problema médico, merecedor de atenção dos

  5. Ví­deo entre: camadas

    Directory of Open Access Journals (Sweden)

    André Brasil

    2008-11-01

    Full Text Available Haveria mudanças de linguagem e representação que se tornaram possí­veis devido ao uso de câmeras e estruturas de produção digital, particularmente no campo videoarte? Provocado por essa questão inicial, um grupo de realizadores e pesquisadores em artemí­dia realizou uma discussão via internet, buscando identificar tendências da produção videográfica contemporânea. O debate resultou no (hipertexto que se segue, coletivo e aberto, articulado em camadas. Palavras-chave ví­deo, tecnologias digitais, novas poéticas Abstract Does the use of cameras and of digital production structures make it possible changes in language and visual representation? On being challenged by this question, a group of promoters and researchers in artmidia started a debate via an internet chat, aiming at identifying tendencies in contemporary videographic production. This article is the outcome of such a debate, in the shape of a collective and open hipertext, articulated in many discursive layers. Key words: video, digital technologies, new poetics

  6. Hemoglobinúria paroxística noturna: relato de dois casos Paroxysmal nocturnal hemoglobinuria: two case reports

    Directory of Open Access Journals (Sweden)

    Carlos J. Araújo

    2002-12-01

    Full Text Available A Hemoglobina Paroxística Noturna (HPN é uma doença adquirida da stem cell hematopoética caracterizada por anemia hemolítica crônica, episódios trombóticos, e com freqüência pancitopenia. É uma desordem clonal, causada por mutação somática do gene PIG-A ligado ao cromossomo X, o qual é requisitado para a formação da estrutura da âncora glicosil-fosfatidil-inositol (GPI. A deficiência da GPI ancorada á proteína CD59 explica a hemólise intravascular na PNH, resultando da inabilidade dos eritrócitos inativar a superfície do complemento. Uma imensa relação clínica existe entre HPN e a anemia aplástica (AA. A ausência de GPI ancorada às proteínas é facilmente detectada pelos métodos de citometria de fluxo aplicados aos eritrócitos e leucócitos; os testes de Ham a da sucrose são absolutos. Em algumas vezes o tratamento com corticóides e/ou androgênio é útil. O transplante de medula óssea alogênico é curativo. O objetivo deste artigo é relatar dois casos de HPN com revisão, enfatizando os aspectos fisiopatológicos, clínicos, diagnósticos e tratamento da HPN.Paroxysmal nocturnal hemoglobinuria (PNH is an acquired hematopoietic stem cell disease characterized by chronic hemolytic anemia, thrombotic episodes and often pancytopenia. It is a chronic disorder caused by a somatic mutation of the X-linked gene PIG-A, which is required for formation of the glycosylphosphatidylinositols (GPI - anchor structure. Deficiency of the GPI-anchored protein CD59 explains intravascular hemolysis in PNH, which results from the inability of erythrocytes to inactivate the surface complement. A very strong clinical relationship exists between aplastic anemia (AA and PNH. Absence of GPI-anchored proteins is easily detected by flow cytometric methods applied to both erythrocytes and leukocytes; the Ham and sucrose tests are now obsolete. Treatment with glucocorticoids and / or androgen is sometimes helpful. Allogeneic

  7. Hemoglobinúria paroxística noturna: da fisiopatologia ao tratamento Paroxysmal nocturnal hemoglobinuria: from physiopathology to treatment

    Directory of Open Access Journals (Sweden)

    Martha Mariana de Almeida Santos Arruda

    2010-01-01

    Full Text Available Hemoglobinúria paroxística noturna (HPN é uma anemia hemolítica crônica adquirida rara, de curso clínico extremamente variável. Apresenta-se frequentemente com infecções recorrentes, neutropenia e trombocitopenia, e surge em associação com outras doenças hematológicas, especialmente com síndromes de falência medular, como anemia aplásica e síndrome mielodisplásica. É considerada ainda um tipo de trombofilia adquirida, apresentando-se com tromboses venosas variadas, com especial predileção por trombose de veias hepáticas e intra-abdominais, sua maior causa de mortalidade. A tríade anemia hemolítica, pancitopenia e trombose faz da HPN uma síndrome clínica única, que deixou de ser encarada como simples anemia hemolítica adquirida para ser considerada um defeito mutacional clonal da célula-tronco hematopoética (CTH. A mutação ocorre no gene da fosfaditilinositolglicana classe-A, e resulta no bloqueio precoce da síntese de âncoras de glicosilfosfaditilinositol (GPI, responsáveis por manter aderidas à membrana plasmática dezenas de proteínas com funções específicas. A falência em sintetizar GPI madura gera redução de todas as proteínas de superfície normalmente ancoradas por ela. Dentre elas estão o CD55 e o CD59, que controlam a ativação da cascata do complemento. Assim, na HPN há aumento da susceptibilidade de eritrócitos ao complemento, gerando hemólise. Revisa-se aqui sua fisiopatologia, curso clínico, os tratamentos disponíveis com ênfase para o transplante de células-tronco hematopoéticas alogênicas e para o eculizumab, um anticorpo monoclonal humanizado que bloqueia a ativação do complemento terminal no nível C5 e previne a formação do complexo de ataque à membrana, a primeira droga a demonstrar eficácia no tratamento da HPN.Paroxysmal nocturnal hemoglobinuria (PNH is a rare disorder, an acquired chronic hemolytic anemia, often associated with recurrent nocturnal exacerbations

  8. Baixa temperatura noturna e deficiência hídrica na fotossíntese de cana‑de‑açúcar

    Directory of Open Access Journals (Sweden)

    Daniela Favero São Pedro Machado

    2013-05-01

    Full Text Available O objetivo deste trabalho foi avaliar as respostas fotossintéticas da cana‑de‑açúcar aos efeitos simultâneos e isolados de baixa temperatura noturna (TN e deficiência hídrica (DH. Após 128 dias do plantio, as plantas da cultivar IACSP94-2094 foram submetidas aos tratamentos: controle, sem DH e com TN de 20°C (TN20; com DH e TN de 20°C (DH/TN20; sem DH e com TN de 12°C (TN12; e com DH e TN de 12°C (DH/TN12 por cinco dias. Após o período de tratamento, as plantas foram irrigadas e submetidas à TN de 20°C por mais quatro dias, para recuperação. Houve decréscimos na assimilação de CO2 em todos os tratamentos. A recuperação total da assimilação de CO2 foi observada apenas nas plantas do tratamento TN12. A ocorrência simultânea da baixa temperatura noturna e da deficiência hídrica causou dano acentuado e persistente na condutância estomática, na capacidade máxima da ribulose‑1,5‑bisfosfato carboxilase, no transporte aparente de elétrons, no fator de eficiência e na eficiência operacional do fotossistema II, o que resultou em limitações difusivas, bioquímicas e fotoquímicas da fotossíntese das plantas de cana‑de‑açúcar.

  9. Modelagem matemática da secagem dos frutos de amendoim em camada delgada

    Directory of Open Access Journals (Sweden)

    Willian Dias Araujo

    Full Text Available RESUMO Este trabalho teve por objetivo ajustar modelos matemáticos aos dados experimentais da secagem dos frutos de amendoim em camada delgada, submetidos a diferentes temperaturas do ar de secagem. Foram utilizados frutos de amendoim da cultivar IAC 505. Os frutos de amendoim foram submetidos à secagem em estufa de ventilação forçada com diferentes níveis de temperatura (40; 50; 60 e 70 ºC. Aos dados experimentais foram ajustados dez modelos matemáticos tradicionalmente utilizados para representação da cinética de secagem em camada delgada. Baseado nos resultados encontrados, conclui-se que dentre os modelos ajustados aos dados experimentais, o modelo de Page foi o escolhido para representar o fenômeno de secagem em camada delgada dos frutos de amendoim. O coeficiente de difusão efetivo aumenta com a elevação da temperatura, e a sua relação com a temperatura de secagem pode ser descrita pela equação de Arrhenius. As propriedades termodinâmicas entalpia e entropia tiveram seus valores reduzidos com aumento da temperatura do ar de secagem, enquanto que os valores da energia livre de Gibbs aumentam com o aumento da temperatura.

  10. Controle estatístico aplicado ao processo de colheita mecanizada diurna e noturna de cana-de-açúcar

    Directory of Open Access Journals (Sweden)

    Rafael Henrique de Freitas Noronha

    2011-01-01

    Full Text Available O sistema de colheita mecanizada pode buscar melhorias no processo utilizando ferramentas de qualidade e auxiliar na redução de perdas, aos danos à soqueira e aumentar a longevidade do canavial. O objetivo deste trabalho foi detectar o controle efetivo da variabilidade das perdas e danos à soqueira, bem como identificar se estas estão dentro dos padrões aceitáveis. Para tanto, foram amostrados 40 pontos em dois períodos de colheita, diurna e noturna, em malhas retangulares (55 x 45 m para determinação das perdas visíveis (rebolos repicados e estilhaçados, pedaço fixo e solto, toco e estilhaço, utilizando-se armações de 10 m². Foram mensurados a altura de corte e os danos na soqueira (sem danos, danos parciais e fragmentados. A estatística utilizada foi descritiva para as variáveis perdas de cana-de-açúcar no período diurno (D e noturno (N, além da análise de variância, utilizando-se o teste F a 5% de probabilidade e o teste de Tukey para comparação de médias e a utilização de controle estatístico de processo por meio de cartas de controle de processo. Não houve diferença quanto a danos na soqueira. No processo de colheita, as perdas por rebolo repicado e estilhaçado foram consideradas estáveis (sob controle, assim como as perdas por toco, enquanto as perdas por pedaço fixo e solto, estilhaço e cana-inteira ficaram fora de controle. A altura de corte e as perdas totais foram maiores durante a colheita noturna. As cartas foram eficientes para a avaliação de controle do processo de colheita diurno e noturno.

  11. Trajetórias escolares prolongadas nas camadas populares Extended academic life for lower class people

    Directory of Open Access Journals (Sweden)

    Débora Cristina Piotto

    2008-12-01

    Full Text Available O objetivo deste estudo é discutir a contribuição de estudos recentes para a compreensão das condições que possibilitam trajetórias escolares prolongadas nas camadas populares. A análise detida de seus resultados e uma entrevista com um aluno de curso superior de alta seletividade proveniente dessas camadas permite problematizar alguns pontos. A revisão de alguns trabalhos sobre o tema, evidenciando a centralidade da família em percursos escolares alongados, possibilita também questionar alguns significados comumente atribuídos à longevidade escolar nas camadas populares como conformismo, sofrimento e ruptura cultural. Evidenciou a necessidade de mais investigação sobre o papel da escola bem como sobre a existência de outros sentidos no acesso e na experiência de estudantes pobres no ensino superior.The purpose of this study is to discuss the contribution of recent studies for understanding the conditions that make extended learning paths possible in low-income segments. The meticulous analysis of its results and an interview with a student of a highly selective higher education course from this background enables us to raise some issues. The review of some studies on the subject evidencing the central role of the family in extended learning paths also enables us to question some of the meanings commonly assigned to extended learning in low-income segments, such as conformism, suffering, and cultural disruption. The need for further investigation on the role of school, as well as on the existence of other meanings related to school access and the experience of poor students in higher education courses has been made evident.

  12. História noturna de Nossa Senhora do Risca-Faca Dark history of our Lady of the Slash-Knife

    Directory of Open Access Journals (Sweden)

    John C. Dawsey

    2009-04-01

    Full Text Available No Jardim das Flores, sobre as cinzas do antigo bairro do Risca-Faca, vivem as filhas - ou netas e bisnetas - de escravas e "índias laçadas no mato". Muitas delas também se consideram filhas de Nossa Senhora. A justaposição das linhagens maternas pode suscitar um efeito de montagem. Nas inervações corporais de Nossas Senhoras não lampejam, também, os gestos de índias e escravas? Nos subterrâneos dos símbolos se encontram indícios de "histórias noturnas" de Nossa Senhora. Sobre esse terreno, o estudo de processos de povoamento em Piracicaba, no interior paulista, requer uma espécie de arqueologia: um duplo deslocamento, de um bandeirante povoador a Nossa Senhora, e de Nossa Senhora às índias e escravas "laçadas no mato". Nesses fundos, o gesto de uma mulher "boia-fria" que "fez picadinho de um homem" agita as sombras de uma nação.In the Garden of Flowers, over the ashes of the old Slash-Knife District, live the daughters - or granddaughters and great-granddaughters - of slaves and native South-American women "lassoed in the woods". Many consider themselves also to be the daughters of Our Lady. The juxtaposition of maternal lineages may produce a montage-like effect. Do gestures of Indians and slaves flash in the bodily innervations of Our Lady? Signs of "dark histories" of Our Lady are found in subterranean regions of symbols. On this terrain, the study of historical patterns of settlement in Piracicaba, a city of the interior of São Paulo, may require a certain type of archaeology, involving a double dislocation, from bandeirante explorers to Our Lady, and from Our Lady to Indian and slave women "lassoed in the woods". In these substrata the gesture of a boia-fria woman who "cut a man into pieces" stirs up the shadows of a nation.

  13. Fatores associados à tosse seca, tosse produtiva e tosse noturna em adultos jovens na Nigéria Factors associated with nocturnal, productive and dry cough in the young adult population of Nigeria

    Directory of Open Access Journals (Sweden)

    Olufemi Olumuyiwa Desalu

    2010-06-01

    Full Text Available OBJETIVO: Determinar os fatores associados à tosse seca, tosse produtiva e tosse noturna entre jovens adultos na Nigéria. MÉTODOS: Foram avaliados 498 indivíduos com 20-44 anos de idade em Ilorin, Nigéria, utilizando-se o questionário European Community Respiratory Health Survey (ECRHS, administrado por entrevistadores treinados. RESULTADOS: A tosse noturna apresentou associações com asma (OR = 10,87; p 0,05. CONCLUSÕES: A prevenção precoce e o tratamento de condições associadas à tosse, assim como a modificação de fatores sociais comumente associados à tosse, são necessários a fim de reduzir a morbidade respiratória.OBJECTIVE: The aim of this study was to determine the factors associated with nocturnal, productive and dry cough among young adults in Nigeria. METHODS: We evaluated 498 subjects, 20-44 years of age, in Ilorin, Nigeria, using the European Community Respiratory Health Survey (ECRHS questionnaire, administered by trained interviewers. RESULTS: Nocturnal cough was associated with asthma (OR = 10.87; p 0.05. CONCLUSIONS: Early prevention and treatment of conditions associated with cough, as well as the modification of social factors commonly associated with cough, are needed in order to reduce respiratory morbidity.

  14. Uma Metodologia para a avaliação dos gradientes de tenacidade à fratura ao longo da camada cementada do aço SAE 5115

    OpenAIRE

    Sandor,Leonardo Taborda; Ferreira,Itamar

    2006-01-01

    Este trabalho propõe um modelo para avaliar pontualmente as variações de tenacidade à fratura ao longo da camada cementada de um aço SAE 5115. A pequena espessura dessas camadas impede a retirada de corpos de prova nas dimensões especificadas pelas normas de ensaios de tenacidade à fratura. Assim, para simular uma camada cementada retirou-se corpos-de-prova de tração e de tenacidade à fratura de amostras de aços SAE 5115, 5140, 5160 e 52100 assumindo a influência local apenas da variação do t...

  15. Impacto da geometria do cânion urbano na intensidade de ilha de calor noturna: análise através de um modelo simplificado adaptado a um SIG

    Directory of Open Access Journals (Sweden)

    Camila Mayumi Nakata-Osaki

    Full Text Available Resumo A geometria urbana é um dos fatores de maior influência na intensidade da ilha de calor urbana. Seu estudo requer a caracterização de cânions urbanos, geralmente medidos pela relação entre a altura dos edifícios e a largura da rua (H/W, conceito aplicado no modelo numérico de Oke em 1981. O objetivo deste artigo é verificar o impacto da geometria do cânion urbano na intensidade de ilhas de calor noturna. Para isso, foram realizados levantamento de dados climáticos e de geometria urbana em duas cidades brasileiras. Os valores de intensidade de ilha de calor foram confrontados com os simulados pelo modelo original de Oke (1981, o qual foi calibrado e adaptado à plataforma SIG, de forma a possibilitar a incorporação de outro parâmetro de geometria, além da relação H/W: o comprimento de rugosidade. Esse processo gerou uma nova ferramenta de cálculo, que é denominda THIS (Tool for Heat Island Simulation. Aplicou-se o novo modelo para simular alguns cenários urbanos hipotéticos, que representam vários tipos de cânions urbanos. Os resultados demonstraram que cânions urbanos de maior rugosidade amenizam as intensidades de ilha de calor noturna em relação a um cânion de mesmo valor de relação H/W e menor rugosidade.

  16. Inovação incremental: tecnologia da quarta camada da Fujifilm

    Directory of Open Access Journals (Sweden)

    Milton de Abreu Campanario

    2007-12-01

    Full Text Available Com  a  globalização,  as  empresas  tiveram  de  adaptar-se a uma nova realidade, gerando, assim,  uma  necessidade  contínua  de  aperfeiçoamento para sua permanência  no  mercado.  Diante  disso,  torna-se  indispensável analisar  a real importância  das inovações tanto  radicais quanto incrementais  nas  organizações.  Nesse  sentido,  este  artigo  aborda os conceitos-chave em relação à inovação  e  suas  conseqüências  na  competitividade  das  empresas. O método foi  o  de estudo  de  caso  na  empresa Fujfilm, avaliando a inovação tecnológica  e as  efetivas mudanças que essa inovação trouxe  para  a  empresa.  Este  estudo  está  embasado  no  referencial  teórico e em  entrevistas com questionário  semi-estruturado.  As  principais  conclusões  indicam que a Fujifilm, para manter-se competitiva, teve de investir em pesquisa e desenvolvimento (P&D,  processo  de melhoramento  contínuo e  inovação  incremental  da  tecnologia  da  quarta camada  de  cor,  que  utiliza  o  conceito  de  reprodução da luz semelhante à forma de percepção da imagem pela visão humana.

  17. Explorando a elasticidade de nuvens IaaS para reconfigurar dinamicamente aplicações n-camadas

    Directory of Open Access Journals (Sweden)

    Devair Dener Darolt

    2016-09-01

    Full Text Available Com o surgimento das nuvens computacionais dinâmicas, aspectos de gerenciamento relacionados com provisionamento sob demanda, escalável e elástico, tornaram-se realidade para provedores e usuários. Nesse cenário, infraestruturas virtuais são provisionadas para hospedar serviços com elevado número de acessos, explorando a elasticidade oferecida pelos provedores para adaptar os recursos computacionais e de comunicação à carga de trabalho submetida, mantendo a qualidade do serviço hospedado. Usualmente, serviços hospedados na nuvem são decompostos em diversas camadas, sendo cada camada individualmente configurável. Uma reconfiguração pode ser iniciada a partir de um pico de processamento, latência elevada na resposta ao usuário final, entre outros indicadores, variando de acordo com as necessidades da aplicação hospedada. Nesse cenário, o presente trabalho propõe um mecanismo para reconfigurar infraestruturas virtuais elásticas, melhorando a relação entre tempo de resposta de uma aplicação n-camadas e o custo de provisionamento do serviço. O algoritmo utiliza o tempo de processamento das requisições submetidas à aplicação como limiar de elasticidade, aumentando o diminuindo o número de máquinas virtuais alocadas. A implementação e análise da solução foi realizada com o simulador de nuvens computacionais CloudSim. A análise experimental indicou uma diminuição no custo de provisionamento combinado com um menor tempo de resposta quando a aplicação é hospedada em uma infraestrutura elástica.

  18. Estudantes das camadas populares no ensino superior público: qual a contribuição da escola?

    Directory of Open Access Journals (Sweden)

    Débora Cristina Piotto

    Full Text Available Os estudos sobre o fracasso escolar que partem de uma concepção crítica da relação entre escola e sociedade e discutem a participação da escola em sua produção são mais numerosos do que pesquisas sobre o sucesso escolar que partem de tal perspectiva. Alguns estudos brasileiros se dedicaram a pesquisar trajetórias escolares bem-sucedidas, porém seus focos de investigação foram as práticas educativas familiares. Assim, o objetivo do presente trabalho é discutir algumas questões relativas à participação da escola na construção de trajetórias escolares prolongadas nas camadas populares. Para isso, analisamos aspectos de entrevistas em profundidade realizadas com duas estudantes de Pedagogia de uma universidade pública provenientes das camadas populares. Com base nas contribuições de estudos sobre o tema, bem como em alguns conceitos da teoria histórico-cultural, discutimos como a escola esteve presente na construção das trajetórias analisadas.

  19. A investigação da cegueira noturna no grupo materno-infantil: uma revisão histórica The investigation of night blindness in the mother-child group: a historical review

    Directory of Open Access Journals (Sweden)

    Cláudia Saunders

    2007-02-01

    Full Text Available Objetivou-se neste estudo apresentar uma revisão histórica sobre a cegueira noturna, um indicador funcional da deficiência de vitamina A. Realizou-se uma revisão da literatura científica publicada no período de 1929 a 2005, nas bases de dados Medline, Lilacs, SciELO e dos comitês nacionais e internacionais de saúde e de micronutrientes, utilizando-se os termos night blindness, xerophthalmia, pregnancy, post partum women, newborn, children, vitamin A deficiency, micronutrient, deficiência de vitamina A, micronutriente, cegueira noturna, gestação, xeroftalmia. O reconhecimento da importância do indicador funcional da deficiência de vitamina A foi consagrado em 1996 pela Organização Mundial de Saúde, a partir da recomendação de uma entrevista padronizada para investigação da cegueira noturna. O método se caracteriza por apresentar facilidades operacionais, ser de baixo custo, além de permitir a sua aplicação tanto para o monitoramento do estado nutricional de pessoas e comunidades, quanto para a avaliação da eficácia de programas de intervenção. Entre gestantes e nutrizes, estudos recentes sugerem a utilidade deste indicador no diagnóstico dos casos de deficiência de vitamina A ainda no estágio subclínico da deficiência, sendo grande a sua concordância com indicadores bioquímicos. Ao longo dos anos, verifica-se também o reconhecimento deste indicador como um instrumento importante para a predição do risco de morbimortalidade no grupo materno-infantil.The aim of this study was to provide a historical review of night blindness, a functional indicator of vitamin A deficiency. The scientific literature published in the period from 1929 to 2005 was reviewed, using Medline, Lilacs, SciELO, National and International Health and Micronutrients Comities databases. The key words used were: night blindness, xerophthalmia, pregnancy, postpartum women, newborn, children, vitamin A deficiency, micronutrient. The importance

  20. Filhos, pais, padrastos: relações domésticas em famílias recompostas das camadas populares

    OpenAIRE

    Felipe Watarai

    2010-01-01

    Esta pesquisa teve como objetivo analisar as formas de relacionamento de adolescentes e jovens de famílias recompostas de camadas populares, filhos de união anterior da mãe, com quem moravam e que se encontrava em nova união, consensual ou formalizada. Procurou-se descrever e analisar as relações vividas pelos sujeitos com a mãe, com seu parceiro, com parentes de ambos, com o pai biológico, com parentes paternos, com irmãos consangüíneos, uterinos e agnáticos, e também com filhos de uniões da...

  1. Comportamento de agregação noturna dos machos de Actinote surima surima (Schaus (Lepidoptera, Heliconiinae, Acraeini Male sleeping aggregation behavior of Actinote surima surima (Schaus (Lepidoptera, Heliconiinae, Acraeini

    Directory of Open Access Journals (Sweden)

    Márlon Paluch

    2005-06-01

    Full Text Available Este artigo registra o comportamento de agregação noturna de machos de Actinote surima surima (Schaus, 1902, estudado na cidade de Curitiba, Paraná, Brasil. A etologia e ecologia dos adultos de Actinote Hübner, [1819] são pouco conhecidas perante o grande número de espécies registradas, aproximadamente 28 espécies e 36 subespécies descritas para a região Neotropical. Poleiros gregários, defesa territorial e o processo de cópula são discutidos comparativamente com o gênero Heliconius Kluk, 1780.This article registers nocturnal aggregation behaviour of the males of Actinote surima surima (Schaus, 1902 studied at the city of Curitiba, Paraná, Brazil. There is little knowledge on the ethology and ecology of the adults of Actinote Hübner, [1819], considering the great number of species registered, approximately 26 species and 36 subspecies nominated for the Neotropical region. Territorial roosting and mating system are comparatively discussed with the genus Heliconius Kluk, 1780.

  2. Avaliação da retenção de gases em camadas de cobertura de aterros de resíduos sólidos

    OpenAIRE

    Odete Holanda Mariano, Maria

    2008-01-01

    As camadas de cobertura das células dos aterros para RSU funcionam como um isolante entre a massa de resíduos e o ambiente externo. Esta camada também é responsável por evitar a entrada de água na massa de resíduos, bem como, a saída de gases para a atmosfera. Esses fatos por si só, revelam a importância do correto dimensionamento e da adequada execução destes elementos dos aterros. A presente pesquisa aborda o comportamento do solo em relação à retenção dos gases pela camad...

  3. Efeito da baixa temperatura noturna e do porta-enxerto na variação diurna das trocas gasosas e na atividade fotoquímica de laranjeira 'Val��ncia' Effects of low night temperature and rootstocks on diurnal variation of leaf gas exchange rates and photochemical activity of 'Valência' sweet orange plants

    Directory of Open Access Journals (Sweden)

    Daniela Favero São Pedro Machado

    2010-06-01

    Full Text Available A redução da fotossíntese durante o inverno pode ser induzida por noites frias, mesmo quando as condições durante o dia não são limitantes. Laranjais são formados com plantas enxertadas, sendo o porta-enxerto citrumeleiro 'Swingle' recomendado em áreas onde há ocorrência de baixas temperaturas. Todavia, os mecanismos fisiológicos pelos quais as plantas apresentam melhor crescimento e produção são pouco conhecidos. O objetivo deste estudo foi testar a hipótese de que o efeito da baixa temperatura noturna na fotossíntese de laranjeiras é dependente do porta-enxerto utilizado, com o citrumeleiro 'Swingle' (Citrus paradisi x Poncirus trifoliata induzindo maior tolerância ao frio noturno se comparado ao limoeiro 'Cravo' (Citrus limonia. Laranjeiras 'Valência' (Citrus sinensis com seis meses, cultivadas em sacolas plásticas (5 L, foram expostas por 12 h à temperatura noturna de 20 e 8 ºC. O tratamento térmico foi realizado em câmara de crescimento, sendo apenas a parte aérea das plantas expostas às distintas temperaturas. Medidas do curso diurno das trocas gasosas e da atividade fotoquímica foram realizadas em condições ambientais naturais. O resfriamento noturno causou maior redução da assimilação de CO², da condutância estomática e da transpiração em laranjeira 'Valência' sobre limoeiro 'Cravo' quando comparado às plantas sobre 'Swingle'. Após o tratamento de frio, as eficiências máxima (Fv/Fm e operacional (Fq'/Fm' do fotossistema II diminuíram nas plantas sobre 'Cravo' e mantiveram-se praticamente inalteradas nas plantas enxertadas em 'Swingle'. Portanto, o porta-enxerto 'Swingle' induziu maior eficiência fotossintética em condições de frio noturno às plantas de laranjeira 'Valência' quando comparado ao porta-enxerto 'Cravo'. A queda da assimilação de CO² em plantas resfriadas foi devida à menor condutância estomática e menor eficiência aparente de carboxilação, ou seja, resultante de

  4. Dessaturação noturna: preditores e influência no padrão do sono de pacientes portadores de doença pulmonar obstrutiva crônica com hipoxemia leve em vigília Nocturnal desaturation: predictors and the effect on sleep patterns in patients with chronic obstructive pulmonary disease and concomitant mild daytime hypoxemia

    Directory of Open Access Journals (Sweden)

    Renata Claudia Zanchet

    2006-06-01

    Full Text Available OBJETIVO: Verificar o padrão da oximetria noturna em portadores de doença pulmonar obstrutiva crônica sem apnéia do sono e com hipoxemia leve em vigília, identificar prováveis parâmetros diurnos capazes de predizer a dessaturação noturna e verificar sua influência no padrão de sono. MÉTODOS: Avaliaram-se 25 pacientes, divididos em dois grupos: com e sem dessaturação noturna. RESULTADOS: Comparando-se o primeiro grupo (52% com o segundo observou-se: idade, 63 ± 5 versus 63 ± 6 anos; volume expiratório forçado no primeiro segundo, 53 ± 31% versus 56 ± 19% do previsto; relação entre volume expiratório forçado no primeiro segundo e capacidade vital forçada, 49 ± 14% versus 52 ± 10%; pressão parcial de oxigênio no sangue arterial, 68 ± 8mmHg versus 72 ± 68mmHg; saturação arterial de oxigênio, 93 ± 2% versus 94 ± 1%. O grupo com dessaturação noturna apresentou menores valores de saturação arterial de oxigênio diurna e saturação periférica de oxigênio noturna. Não houve diferença no padrão de sono entre os grupos. Houve correlação da relação entre o volume expiratório forçado no primeiro segundo e a capacidade vital forçada, pressão parcial de oxigênio no sangue arterial e saturação arterial de oxigênio diurnas, e saturação periférica de oxigênio no exercício com os níveis de saturação periférica de oxigênio noturna, porém somente a saturação arterial de oxigênio diurna foi preditora da dessaturação noturna. CONCLUSÃO: A única variável capaz de predizer dessaturação noturna foi a saturação arterial de oxigênio diurna. A dessaturação noturna não influencia o padrão de sono de portadores de doença pulmonar obstrutiva crônica com hipoxemia diurna leve.OBJECTIVE: To determine the nocturnal oximetry pattern in chronic obstructive pulmonary disease patients having no sleep apnea and presenting mild daytime hypoxemia, to identify probable daytime parameters capable of

  5. Hemoglobinúria paroxística noturna: revisão bibliográfica e relatos de casos de pacientes em tratamento com eculizumabe no ambulatório de hematologia do Conjunto Hospitalar de Sorocaba

    Directory of Open Access Journals (Sweden)

    Antonianna Furtado Cavalcante Vecina

    2015-10-01

    Full Text Available A Hemoglobinúria Paroxística Noturna (HPN é uma desordem hematológica rara causada por mutações somáticas adquiridas no gene PIG-A e que levam à deficiência na síntese de âncoras de GPI, responsáveis por manter aderidas à membrana plasmática proteínas como a CD55 e a CD59, expressas em todas as células hematopoiéticas. Por provocar, caracteristicamente, anemia hemolítica, pancitopenia e trombose venosa, a expressão “tríade da HPN” é utilizada a fim de se fazer referência a essas condições apresentadas com frequência no curso clínico da doença. O Eculizumabe, um anticorpo monoclonal, é a mais recente forma de tratamento para HPN. O objetivo dessa pesquisa é caracterizar a população portadora de HPN atendida no ambulatório de Hematologia do Conjunto Hospitalar de Sorocaba (CHS, realizar revisão bibliográfica sobre o tema e avaliar a resposta ao tratamento com Eculizumabe. Trata-se de estudo retrospectivo observacional dos pacientes portadores de HPN, diagnosticada através de Imunofenotipagem, atendidos no ambulatório de Hematologia do CHS, entre 2006 e 2015. Sete pacientes foram identificados como portadores de HPN. A mediana de idade foi de 49 anos, com discreto predomínio do sexo masculino. Os sintomas apresentados com maior frequência foram os relacionados à anemia. Todos os pacientes, além de anemia severa, também evidenciavam leucopenia e plaquetopenia. A maioria apresentava DHL elevado. Os pacientes em tratamento com Eculizumabe (n=4 apresentaram melhora dos sintomas, normalização da hemoglobina (p= 0,0092 e diminuição dos níveis de DHL (p=0,2378. Assim, todos pacientes com HPN apresentavam anemia severa e DHL como principal marcador de hemólise. O uso do Eculizumabe se provou eficaz na melhora do nível de hemoglobina dos pacientes, deixando-os livres de anemia e de transfusões.

  6. COMPACTAÇÃO DE SOLOS EM LABORATÓRIO: EFEITO DO DIÂMETRO E DO NÚMERO DE CAMADAS DO CORPO DE PROVA

    Directory of Open Access Journals (Sweden)

    Flavio Alessandro Crispim

    2015-06-01

    Full Text Available RESUMONeste trabalho, estudou-se a influência do diâmetro e do número de camadas do corpo de prova nas curvas de compactação de laboratório e na resistência mecânica de dois solos residuais de gnaisse da Zona da Mata Norte de Minas Gerais, respectivamente, de texturas argilo-areno-siltosa (Solo 1 e areno-silto-argilosa (Solo 2, com vistas à construção de estradas florestais. Além dos resultados dos ensaios de compactação, determinou-se a resistência à compressão não confinada dos solos empregando corpos de prova compactados na umidade ótima (wot e nos teores de umidade 3% abaixo e 2% acima, considerando como referência a energia de compactação do ensaio Proctor normal e empregando corpos de prova compactados em uma, duas e três camadas, bem como nos diâmetros de 35 mm, 73 mm e 100 mm, com nove repetições. Para fins práticos de engenharia e com base em análise estatística aplicada aos parâmetros massa específica aparente seca e resistência à compressão não confinada, pode-se concluir que: (i há diferenças significativas entre as compactações realizadas em uma e em três camadas, não ocorrendo o mesmo nas compactações realizadas em duas e em três camadas, para ambos os solos; e (ii há diferenças significativas entre a compactação de corpos de prova de diâmetro 100 mm e os demais de 73 mm e 35 mm, para o solo 1 (argiloso, bem como há também diferenças apenas no ramo seco da curva de compactação, para o solo 2 (arenoso.

  7. Análise quantitativa da camada de fibras nervosas da retina de cães normais e glaucomatosos através da polarimetria a laser

    Directory of Open Access Journals (Sweden)

    Ana Lucia Braga Martins

    2003-01-01

    Full Text Available As lesões glaucomatosas são progressivas e irreversíveis. Estudos sobre o aparecimento e comportamento desta enfermidade vêm sendo discutidos na oftalmologia em geral. O diagnóstico precoce é de extrema importância para o tratamento e estabilização da mesma. A análise da espessura da camada de fibras nervosas retinianas ''in vivo'' foi proposta na oftalmologia humana, para estabelecer as alterações produzidas pelo glaucoma, e tem demonstrado que tais alterações podem ser detectadas até seis anos antes de alterações de campo visual e aumento de pressão intraocular. Entretanto, na Medicina Veterinária, estes dados carecem de estudo e discussão. Neste experimento foram utilizados dois grupos de cães, com olhos normais e olhos glaucomatosos, que foram submetidos à análise das fibras nervosas retinianas através do Analisador de Fibras Nervosas GDx. Os resultados estatísticos demonstraram que a camada de fibras nervosas dos olhos dos cães glaucomatosos estava mais delgada (p < 0,05 quando comparados aos olhos de cães normais, confirmando a perda de axônios das células ganglionares em olhos de cães com glaucoma.

  8. Estudo da cinética de secagem em camada delgada da bráctea da macambira

    Directory of Open Access Journals (Sweden)

    T. R. B. Pessoa

    2015-12-01

    Full Text Available A macambira é uma bromélia do sertão brasileiro e a sua principal utilização para consumo de suas brácteas é na forma de produtos secos, tais como a farinha. O objetivo deste trabalho foi estudar o processo de secagem em camada delgada da bráctea da macambira (Bromelia laciniosa, Mart. in natura a diferentes temperaturas. A secagem convectiva foi realizada a 43, 49 e 56 °C em condições constantes de velocidade e umidade absoluta do ar. Foi utilizado um secador de leito fixo com escoamento de ar perpendicular as partículas, cujos ensaios de secagem foram conduzidos até que as amostras alcançassem massa constante. A cinética de secagem foi avaliada através das curvas experimentais de secagem. A difusividade efetiva média de umidade foi determinada através de correlações empíricas e da solução do modelo de Fick para a difusão de água líquida. O aumento da temperatura do ar de secagem provocou o aumento da taxa de secagem e a diminuição do conteúdo de umidade das amostras ao longo de toda operação. As correlações empíricas (análoga a lei de resfriamento de Newton e de Page apresentaram melhores ajustes aos resultados experimentais em relação ao modelo de Fick. Os valores da difusividade média de umidade encontradas para a bráctea de macambira a 43, 49 e 56°C foi na ordem de 10-10 m/s². Os melhores resultados para a secagem de bráctea de macambira foi a 56°C.Mathematical modeling and effective diffusivity of drying process of bract of macambiraAbstract: The macambira is a bromeliad in the Brazilian arid regions and its main use for consumption of its bract is in the form of dry products such as flour. The objective of this work was to study the drying process thin layer bract macambira (Bromeliad laciniosa Mart. at different temperatures. The convective drying was performed at 43, 49 and 56 °C under constant air conditions of speed and absolute humidity. Experimental tests were conducted in a fixed

  9. Crescimento de juvenis de pacu em tanques com aeração noturna - DOI: 10.4025/actascianimsci.v25i1.2122 Growth of pacu juveniles in nightly aerated system - DOI: 10.4025/actascianimsci.v25i1.2122

    Directory of Open Access Journals (Sweden)

    Evoy Zaniboni Filho

    2003-04-01

    Full Text Available O presente estudo avalia o efeito de duas densidades de estocagem (20 e 40 peixes/m2 e da aeração noturna da água dos tanques de cultivo do pacu Piaractus mesopotamicus (Holmberg, 1887. Um total de 12 tanques com fundo de terra e paredes de alvenaria foram utilizados em 4 tratamentos com 3 repetições cada. Foram utilizados alevinos com 30 dias de idade, pesando em média 1,93 ± 1,70g, e o experimento foi conduzido durante 60 dias. A aeração noturna possibilitou a obtenção de valores médios de oxigênio de 5,6 ± 0,5 e 5,8 ± 0,5mg O2/l para as densidades de 20 e 40 peixes/m2, enquanto nos tanques sem a aeração os valores de oxigênio foram de 4,3 ± 0,7 e 3,4 ± 0,7mg O2/l, respectivamente. A biomassa foi o único parâmetro que aumentou com a aeração noturna, enquanto que a sobrevivência e o crescimento apresentaram efeitos discretos.The present study evaluated the effects of two stocking densities (20 and 40 fish/m2 and nightly aeration on water quality and growth of pacu, Piaractus mesopotamicus (Holmberg, 1887. Twelve ponds with concrete walls and earthen bottom were used to set 4 treatments with 3 repetitions each. 30-day old fish with average weight (mean standard ± deviation of 1.93 ± 1.70g in the beginning of the experiment were observed for 60 days. Nightly aeration promoted 5.6 ± 0.5 and 5.8 ± 0.5mg O2/l at dawn in the population densities of 20 and 40 fish/m2, while the unaerated ponds allowed 4.3 ± 0.7 and 3.4 ± 0.7mg O2/l for these densities, respectively. Fish biomass was the only biological parameter increased by nightly aeration, while discrete effects were observed in growth and survival.

  10. Um refinamento da estrutura da camada de aplicação do RM-OSI/ISO e aspectos de sua implementação em um sistema didatico de comunicação

    OpenAIRE

    Flavio Morais de Assis Silva

    1993-01-01

    Resumo: Esta dissertação consiste de Uma definição mais precisa de funcionalidades para os componentes da camada de Aplicação do RM-OSI/ISO (Reference Model - Open Systems Interconection / International Organization for Standardization). Esta definição de funcionalidades tem a finalidade de esclarecer os relacionamentos que há entre os componentes desta camada e de servir de uma base conceitual, a partir da qual estruturas para implementações possam ser derivadas. As funcionalidades apresenta...

  11. Planetary boundary layer model for estimating the radionuclides concentration in accidental liberations; Modelo de camada limite planetaria para estimar a concentracao de radionuclideos em liberacoes acidentais

    Energy Technology Data Exchange (ETDEWEB)

    Molnary, Leslie de [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil)]. E-mail: molnaryy@net.ipen.br

    2002-07-01

    A two layer bulk model is used to simulate numerically the time and spatial evolution of concentration of radionuclides in the Planetary Boundary Layer (PBL) for convective and stable conditions. In this model, the closure hypothesis are based on the integrated version of the Turbulent Kinetics Energy equation. This type of model was adopted here because it is numerically simple to be applied operationally in routine and emergency support systems of atmospheric releases at nuclear power plants, and the hypothesis of the efficiency of the vertical mixing seems to be physically reasonable to simulate PBL evolution for high wind conditions and stable conditions in subtropical latitudes regions. In order to validate the model, numerical simulations were carried out with initial and boundary conditions based on vertical profiles of temperatures and horizontal wind speed and direction obtained from tethered balloon soundings, synoptic charts at 850 hPa and surface observations. Comparisons between a 24 hour long numerical simulation and observations indicate that the model is capable of reproduce the diurnal evolution of temperature and horizontal wind during the convective regime. During stable conditions, the slab model was able to simulate the intensity of the surface inversion as a difference between the mixed layer and the surface temperature. The simulated mixed layer height matches with observations during the convective and stable regime. (author)

  12. COMPACTAÇÃO DE SOLOS EM LABORATÓRIO: EFEITO DO DIÂMETRO E DO NÚMERO DE CAMADAS DO CORPO DE PROVA

    OpenAIRE

    Crispim,Flavio Alessandro; Lima,Dario Cardoso de; Silva,Claudio Henrique de Carvalho; Schaefer,Carlos Ernesto Gonçalves Reynaud; Carvalho,Carlos Alexandre Braz de; Brandão,Elisson Hage

    2015-01-01

    RESUMONeste trabalho, estudou-se a influência do diâmetro e do número de camadas do corpo de prova nas curvas de compactação de laboratório e na resistência mecânica de dois solos residuais de gnaisse da Zona da Mata Norte de Minas Gerais, respectivamente, de texturas argilo-areno-siltosa (Solo 1) e areno-silto-argilosa (Solo 2), com vistas à construção de estradas florestais. Além dos resultados dos ensaios de compactação, determinou-se a resistência à compressão não confinada dos solos empr...

  13. Quando os dados contrariam as previsões estatísticas: os casos de êxito escolar nas camadas socialmente desfavorecidas

    Directory of Open Access Journals (Sweden)

    Nadir Zago

    2000-07-01

    Full Text Available Como explicar as situações que apresentam claras evidências de êxito escolar quando a realidade social e cultural do aluno é desfavorável a sua escolarização? Sem pretender dar conta desta questão apresentamos, neste trabalho, alguns dados de pesquisas com famílias de meios populares que vivenciaram situações que demonstram adaptação escolar e maior tempo de permanência de seus filhos no sistema de ensino, se comparadas às estatísticas sobre a realidade educacional brasileira. Contrariando a visão genérica e patologizante de famílias dos meios populares, o trabalho mostra o erro em que incorremos quando nos apoiamos nos padrões das camadas médias para avaliar as práticas observadas nos meios socialmente desfavorecidos.

  14. Análise da camada de fibras nervosas da retina em portadores de enxaqueca com aura Retinal nerve fiber layer measurements in patients with migraine with aura

    Directory of Open Access Journals (Sweden)

    Felipe Andrade Medeiros

    2001-10-01

    Full Text Available Objetivo: Avaliar as possíveis alterações na camada de fibras nervosas da retina (CFNR em pacientes com enxaqueca com aura, detectada por meio da polarimetria de varredura a laser. Métodos: Vinte pacientes com enxaqueca com aura e vinte indivíduos normais foram estudados. Os critérios de inclusão para os dois grupos compreenderam: idade de pelo menos 18 anos; ausência de história de doenças oculares, exceto erro refracional ou estrabismo; e ausência de história familiar de hipertensão ocular ou glaucoma. Foram excluídos pacientes com erro refracional maior que 5 DE e/ou 2 DC; acuidade visual corrigida menor que 20/40; pressão intra-ocular maior que 21 mmHg; discos ópticos anômalos ou com escavação maior que 0,5 ou assimetria de escavação maior que 0,2; ou com presença de doenças retinianas concomitantes. Os pacientes foram submetidos a exame de campo visual (Humphrey 30-2 e análise da CFNR com a polarimetria a laser (GDx - Nerve Fiber Analyzer. Um olho de cada paciente foi randomizado para análise estatística. Resultados: Nenhum dos pacientes do grupo controle apresentou defeitos de campo visual. Nove olhos (45% dos pacientes com enxaqueca tiveram anormalidades de campo visual além de 95% do intervalo de confiança do normal, como indicado pelos índices MD, CPSD ou GHT. Os valores de retardo no setor superior da CFNR dos pacientes com enxaqueca foram significativamente menor que no grupo controle (p=0,005. Não houve diferença significativa entre os valores de retardo dos dois grupos nas medidas globais e nos setores inferior, nasal e temporal. Conclusão: As medidas de retardo obtidas com a polarimetria a laser foram significativamente menores na porção superior da CFNR dos pacientes com enxaqueca com aura, sugerindo possível dano isquêmico às fibras nervosas, relacionadas à enxaqueca.Purpose: To evaluate the possible alterations of the retinal nerve fiber layer (RNFL, as detected by scanning laser polarimetry

  15. Tratamentos térmicos do calxisto para uso como camada de cobertura no cultivo de Agaricus brasiliensis Thermal treatments on lime schist casing layer for Agaricus brasiliensis cultivation

    Directory of Open Access Journals (Sweden)

    Nelson Barros Colauto

    2010-07-01

    Full Text Available A escolha da camada de cobertura é uma das mais importantes etapas do cultivo de Agaricus brasiliensis. Apesar dessa importância, poucos estudos relatam o uso de diferentes tratamentos térmicos para o controle da microbiota em camadas de cobertura alternativas. Assim, o objetivo deste trabalho foi avaliar o efeito da pasteurização e da autoclavagem do material alternativo calxisto para utilização como camada de cobertura no cultivo de A. brasiliensis. O fungo foi inicialmente crescido em grãos de trigo e transferido para meio de cultivo previamente compostado. Após a completa colonização, a camada de cobertura (calxisto pasteurizada ou autoclavada foi adicionada. Avaliaram-se a eficiência biológica, o número e a biomassa de cogumelos produzidos e o fluxo de produção. Concluiu-se que a camada de cobertura com calxisto autoclavado reduzem o tempo de produção, a eficiência biológica e o número e a biomassa de cogumelos cultivados. Entretanto, a camada de cobertura com o calxisto pasteurizado é a mais eficiente para o cultivo de A. brasiliensis.Casing layer choice is one of the most important phases on Agaricus brasiliensis cultivation. Besides the importance of it few studies report the use of different heat treatments to control the microbiota in alternative casing layers. Thus, the objective of this work was to evaluate the effect of pasteurized or autoclaved lime schist as an alternative casing layer on A. brasiliensis cultivation. The fungus was previously grown on wheat grains and transferred to a substratum previously composted. After substratum mycelium colonization a pasteurized or autoclaved lime schist casing layer was added on. It was evaluated the biological efficiency, the number and mass of produced mushroom and the production flush along cultivation. It was concluded that autoclaved lime schist casing layer decreases period of production, biological efficiency, number and mass of cultivated mushrooms. However

  16. Modas de mulher, modos de comércio: camadas médias, cultura e economia na história do consumo moderno

    Directory of Open Access Journals (Sweden)

    Everardo Rocha

    2016-06-01

    Full Text Available Resumo O objetivo deste trabalho é investigar a recorrência de relações entre distintos movimentos do consumo na modernidade, a formação das “classes médias” e a construção do ideal da “mulher moderna”. Vamos analisar as formas pelas quais um determinado modelo de negócios, inaugurado pelos grandes magazines em meados do século XIX, estrutura um sistema para o comércio de bens e serviços que contribui para inserir contingentes das populações urbanas de camadas médias no universo do consumo e a mulher em atividades de compra. Este estudo analisará três contextos de expansão do consumo nos quais se evidencia a complexa relação entre economia e cultura: a emergência dos grandes magazines nas cidades europeias em meados do século XIX; o surgimento dos shoppings nos Estados Unidos após a Segunda Guerra Mundial; a chegada de marcas internacionais no Brasil a partir dos anos 2000, especificamente o caso da rede de lojas Forever 21.

  17. Avaliação da reprodutibilidade das medidas da camada de fibras nervosas retiniana e da cabeça do nervo óptico pela tomografia de coerência óptica

    Directory of Open Access Journals (Sweden)

    Ricardo Rau

    2012-10-01

    Full Text Available OBJETIVO: Determinar a reprodutibilidade da espessura da camada de fibras nervosas da retina peripapilar e dos parâmetros da cabeça do nervo óptico em olhos normais, utilizando a tomografia de coerência óptica de domínio espectral (SD-OCT. MÉTODOS: Trinta e quatro olhos de 34 indivíduos saudáveis foram incluídos no estudo. O protocolo do cubo do disco óptico 200x200 do OCT Cirrus foi utilizado para gerar 3 imagens de cada olho para avaliar a reprodutibilidade. O coeficiente de correlação intraclasse (ICC foi calculado para as medidas da espessura da camada de fibras nervosas da retina e da cabeça do nervo óptico. RESULTADOS: A correlação foi excelente para todas as medidas da espessura da camada de fibras nervosas da retina (ICC entre 0,87 e 0,98. O mesmo ocorreu com os parâmetros da cabeça do nervo óptico que, com exceção da razão E/D vertical (ICC 0,56, apresentou ICC entre 0,83 e 0,99. CONCLUSÃO: As medidas de espessura da camada de fibras nervosas da retina peripapilar e os parâmetros da cabeça no nervo óptico demonstraram uma excelente reprodutibilidade com o OCT Cirrus, indicando que este aparelho poderá ser uma ferramenta útil no estudo do glaucoma. Este estudo apresenta algumas limitações, como o pequeno número de casos avaliados, sendo necessários maiores estudos para corroborar nossos achados.

  18. Risco e saúde reprodutiva: a percepção dos homens de camadas populares Reproductive health and risk as perceived by low-income Brazilian men

    Directory of Open Access Journals (Sweden)

    Carla Cristina Lima de Almeida

    2002-06-01

    Full Text Available Os estudos desenvolvidos na saúde reprodutiva discutem, entre outras coisas, as lacunas existentes nos modelos tradicionais de pesquisa, os quais negligenciam aspectos sócio-culturais e também ético-filosóficos. Estes aspectos atravessam a definição de temas essenciais à pesquisa em saúde reprodutiva, tais como: sexualidade, reprodução e gênero. A busca da articulação entre as duas disciplinas (Ciências Sociais e Saúde Pública ajuda a pensar como as pessoas e os grupos sociais delimitam e percebem os riscos que enfrentam. Neste estudo, analisamos a percepção de risco em saúde reprodutiva de um grupo de homens de camadas populares do Rio de Janeiro, entrevistados no âmbito de uma pesquisa sobre contracepção. Visamos identificar as situações e os contextos em que o problema emerge e o conteúdo atribuído ao mesmo. A partir desses depoimentos, é possível concluir que existe uma hierarquia de riscos entre os entrevistados, a qual é modificada dependendo de valores culturais, contextos relacionais, institucionais e sociais.Studies in the field of reproductive health discuss existing gaps in traditional research models, which neglect not only social and cultural aspects but also ethical and philosophical ones. Such aspects cut cross over the definition of essential themes for reproductive health research, like sexuality, reproduction, and gender. The search for connections between the two disciplines (Social Science and Public Health relates to how people and social groups limit and deal with the risks they face. In this study, we analyze the perception of risk in reproductive health among a group of low-income men from Rio de Janeiro. The group was interviewed during a study on male contraception. The objective was to identify the situations and contexts from which the problem (and the contents ascribed to it emerge. One can conclude from the interviews that there is a risk hierarchy which is modified according to

  19. Transferência de calor aplicada à prototipagem rápida por deposição de metal em camadas sucessivas utilizando soldagem 3D

    Directory of Open Access Journals (Sweden)

    Felipe Ferreira Fraga

    2013-12-01

    Full Text Available Este trabalho apresenta um estudo dos fenômenos de transferência de calor no processo de prototipagem rápida por deposição de metal em camadas sucessivas utilizando soldagem a arco, também chamada de soldagem 3D (3D Welding. O objetivo é desenvolver um modelo simplificado e compreender o processo de transferência de calor e suas relações com os parâmetros de soldagem, de modo a se possibilitar um controle dos ciclos térmicos a que estará sujeito o material depositado. Desenvolveu-se um modelo físico-matemático para a transferência de calor durante o processo de soldagem, o qual é resolvido numericamente pelo método das diferenças finitas, permitindo a simulação de situações típicas desse tipo de processo de fabricação. O modelo numérico desenvolvido foi validado por meio da simulação de casos específicos para os quais se conhecem soluções analíticas. A partir das equações do modelo, definiram-se parâmetros adimensionais, dentre os quais pode-se citar o grupo adimensional π1, relacionado principalmente à velocidade de soldagem. Realizaram-se alguns experimentos numéricos observando a influência desse grupo nas temperaturas máximas, médias e nas amplitudes dos ciclos térmicos que a peça está sujeita.

  20. O significado da experiência escolar para segmentos das camadas médias The meaning of school experience for middle class segments

    Directory of Open Access Journals (Sweden)

    Isabel Lelis

    2005-05-01

    Full Text Available Este texto tem como objetivo revelar o sentido da experiência escolar para jovens de camadas médias, alunos de uma instituição privada confessional, da zona sul da cidade do Rio de Janeiro. Algumas questões serviram de ponto de partida para a pesquisa realizada de 2001 a 2003: como alunos com esse perfil socioeconômico e educacional constroem o seu ofício de estudante? Como articulam as relações com professores e colegas? Que relações estabelecem com as práticas de avaliação e os processos de ensinar e aprender? Relações instrumentais? Relações as quais permitem que os significados de seus grupos de referência aflorem? Que modelos de socialização são veiculados por essas escolas? O foco de análise apoiou-se em algumas das condições de produção e expressão do ofício do aluno como a caracterização socioeconômica das famílias, a trajetória escolar dos estudantes ao longo do ensino fundamental, o papel do estudo em suas vidas e práticas culturais e o lazer dos jovens.The objective of this text is to disclose the meaning of school education for middle class youngsters who are students of a private confessional institution in the South zone of Rio de Janeiro city. Some questions have served as the starting point for the research carried out from 2001 to 2003: How do students with this social, economic, and educational profile frame their role as students? How do they articulate their relationships with teachers and colleagues? What relationships do they establish with evaluation practices and teaching and learning processes? Instrumental relationships? Relationships that allow the meanings of their reference groups to emerge? What socialization models are transmitted by these schools? The focus of the analysis was based on some of the conditions of production and expression of the role of the student as a social and economic characterization of his/her family, the learning path of students along primary school, the

  1. Cromatografia em camada delgada acoplada a voltametrias cíclica e de pulso diferencial na análise de ácido rosmarínico de Rosmarinus officinalis Linné (Alecrim)

    OpenAIRE

    GONÇALVES, Darlene

    2010-01-01

    Esse estudo apresenta um método eletroanalítico em estado sólido para identificação e quantificação do ácido rosmarínico (AR), um fitoantioxidante de grande interesse pelas vantagens terapêuticas e aplicabilidade nas áreas alimentícia, cosmética e farmacêutica; após isolamento do mesmo de amostras de Rosmarinus officinalis Linné (alecrim), através de cromatografia em camada delgada (CCD), onde utilizou-se a sílica contendo o analito isolado (mancha da cromatografia) raspada da cromatoplaca, p...

  2. Detecção de capsaicina em extratos dos frutos verdes e maduros de Capsicum baccatum L. pelas metodologias de cromatografia em camada delgada e histoquímica

    Directory of Open Access Journals (Sweden)

    Tamires de Souza RODRIGUES

    2015-01-01

    Full Text Available A pimenta dedo-de-moça (Capsicum baccatum L. é uma espécie utilizada no mundo inteiro pelo seu sabor picante e por possuir inúmeras atividades medicinais. Essas atividades farmacológicas são proporcionadas por um grupo de substâncias presentes, os capsaicinoides, além de taninos, flavonoides, vitamina C, entre outros. Dos capsaicinoides presentes, a capsaicina possui especial importância. O objetivo do presente trabalho foi avaliar a presença da capsaicina nos extratos dos frutos verdes e maduros de Capsicum baccatum L. pelas metodologias de cromatografia em camada delgada e histoquímica. Os extratos foram preparados com acetona. A cromatografia foi realizada com placas de sílica gel G4, eluída com hexano:acetato de etila (60:40 e reveladas com reagente de Dragendorff. A capsaicina pode ser detectada somente no estágio imaturo (verde dos frutos de Capsicum baccatum L. pela metodologia de cromatografia em camada delgada e pelo teste histoquímico.

  3. A thin layer electrochemical cell for disinfection of water contaminated with Staphylococcus aureus Uma célula eletroquímica de camada delgada para desinfecção de água contaminada com Staphylococcus aureus

    Directory of Open Access Journals (Sweden)

    Isabel C. P. Gusmão

    2009-09-01

    Full Text Available A thin layer electrochemical cell was tested and developed for disinfection treatment of water artificially contaminated with Staphylococcus aureus. Electrolysis was performed with a low-voltage DC power source applying current densities of 75 mA cm-2(3 A or 25 mA cm-2 (1 A. A dimensionally stable anode (DSA of titanium coated with an oxide layer of 70%TiO2 plus 30%RuO2 (w/w and a 3 mm from a stainless-steel 304 cathode was used in the thin layer cell. The experiments were carried out using a bacteria suspension containing 0.08 M sodium sulphate with chloridefree to determine the bacterial inactivation efficacy of the thin layer cell without the generation of chlorine. The chlorine can promote the formation of trihalomethanes (THM that are carcinogenic. S. aureus inactivation increased with electrolysis time and lower flow rate. The flow rates used were 200 or 500 L h-1. At 500 L h-1 and 75 mA cm -2 the inactivation after 60 min was about three logs of decreasing for colony forming units by mL. However, 100% inactivation for S. aureus was observed at 5.6 V and 75 mA cm-2 after 30 min. Thus, significant disinfection levels can be achieved without adding oxidant substances or generation of chlorine in the water.Uma célula eletroquímica de camada delgada foi utilizada e desenvolvida para a desinfecção de água contaminada artificialmente com Staphylococcus aureus. A eletrólise foi executada com uma fonte de corrente direta utilizando 75 mA cm-2 (3 A ou 25 mA cm-2 (1 A. Um anodo dimensionalmente estável (DSA de titânio revestido com uma camada do óxido de 70%TiO2 e 30%RuO2 (w/w e distanciado por 3 milímetros de um catodo de aço inoxidável 304 foi utilizado para gerar uma camada delgada de suspensão bacteriana passando pela célula de camada delgada. As suspensões utilizadas eram feitas apenas com Na2SO4 0,08 M e livre de íons cloretos de forma a inativar as células bacterianas no tratamento eletroquímico sem a geração de cloro

  4. Filtração de aerossóis em altas temperaturas utilizando filtros cerâmicos de dupla camada: influência do diâmetro de partícula na eficiência de coleta

    OpenAIRE

    Freitas,N. L de; Maniero,M. G.; Coury,J. R.

    2004-01-01

    Neste trabalho foram utilizados filtros cerâmicos para filtração de aerossóis, constituídos por dupla camada, onde a primeira camada é formada por um suporte celular de elevada porosidade com diâmetro de poro controlado e a segunda formada por uma película filtrante. A camada suporte foi obtida pela técnica de replicação cerâmica de espuma poliuretânica, por meio da impregnação de uma suspensão aquosa de Al2O3. Foram utilizados suportes de 45 e 75 poros/polegada. A membrana filtrante (Al2O3 e...

  5. Avaliação da Resistência à Oxidação de Camadas de Ligação de Revestimentos Utilizados em Barreiras Térmicas

    Directory of Open Access Journals (Sweden)

    Maria Júlia Xavier Belém

    2015-12-01

    Full Text Available Resumo Revestimentos são crescentemente utilizados como alternativa de engenharia em projetos avançados. Diversas técnicas e processos estão disponíveis para a aplicação de revestimentos, dependendo da condição específica a que se destinam. Revestimentos para barreira térmica, conhecidos como TBC, fazem parte de uma série especial de revestimentos metal-cerâmicos com tradicional utilização na indústria aeronáutica e crescente aplicação nas indústrias automotiva e de turbinas industriais. Um dos maiores problemas dos TBCs é sua degradação devido à oxidação em alta temperatura da camada de ligação, levando à falha do revestimento por desplacamento. O presente estudo investiga e compara o comportamento de oxidação da camada de ligação de revestimentos para barreira térmica (TBC, tendo como material a liga NiAl, que é uma liga bastante utilizada devido a suas características em altas temperaturas e por ter uma boa adesão em vários substratos. A camada de ligação foi aplicada em um substrato de Aço ABNT 1020 pelo processo Flame Spray (Aspersão a chama. Para a realização dos testes de oxidação isotérmica, o forno utilizado foi regulado a uma temperatura de 1000°C em atmosfera de ar estático, com exposição das amostras por 24, 48, 96 horas e o resfriamento feito em ar atmosférico à temperatura ambiente. A análise do óxido crescido termicamente (TGO – Thermally Grown Oxide em cada amostra foi feita relacionando os tempos de exposição, avaliando a taxa de óxidos por meio de medições de ganho de massa das amostras com revestimentos oxidados e análises por Microscopia Eletrônica de Varredura e Microscopia Ótica.

  6. Impact of the number of Spodoptera frugiperda egg layers on parasitism by Trichogramma atopovirilia Impacto do número de camadas de ovos de Spodoptera frugiperda no parasitismo por Trichogramma atopovirilia

    Directory of Open Access Journals (Sweden)

    Eduardo Barbosa Beserra

    2005-04-01

    Full Text Available Egg parasitoids of the genus Trichogramma (Hymenoptera: Trichogrammatidae can be found in several crops attacking Spodoptera frugiperda (J. E. Smith, 1797 (Lepidoptera: Noctuidae eggs. It is therefore necessary to demonstrate the capacity of these natural enemies in suppressing populations of the pest to allow them to be used in biological control programs against that species. This work had the objective of evaluating the impact of egg layer distribution in S. frugiperda egg masses on the parasitism capacity of Trichogramma atopovirilia Oatman & Platner, 1983. Masses containing one, two, and three layers were used as treatments, and 1.6 parasitoid per egg of the pest were released. Parasitism percentage differences were observed among the three types of masses under study, on average 66.24 ± 8.56%, 45.20 ± 6.20%, and 40.10± 3.46% for egg masses with one, two, and three layers, respectively, demonstrating the potential of use of the parasitoid for the control of fall armyworm.Parasitóides de ovos do gênero Trichogramma (Hymenoptera: Trichogrammatidae ocorrem em diversas culturas atacando ovos de Spodoptera frugiperda (J. E. Smith, 1797 (Lepidoptera: Noctuidae sendo necessário que se demonstre a capacidade desses inimigos naturais em suprimir a população da praga para que eles possam ser utilizados em programas de controle biológico daquela espécie. O trabalho teve como objetivo avaliar o impacto da distribuição dos ovos em camadas nas posturas de S. frugiperda sobre a capacidade de parasitismo de Trichogramma atopovirilia Oatman & Platner, 1983. Foram utilizadas como tratamentos posturas com uma, duas e três camadas e liberado 1.6 parasitóide por ovo da praga. Observaram-se diferenças quanto à porcentagem de parasitismo entre os três tipos de posturas estudados, sendo em média de 66,24 ± 8,56%, 45,20 ± 6,20% e 40,10 ± 3,46% para posturas com uma, duas e três camadas respectivamente, mostrando o potencial de utilização do

  7. Carotid intima-media thickness in spondyloarthritis patients Espessamento da camada média-íntima da carótida em pacientes com espondiloartrite

    Directory of Open Access Journals (Sweden)

    Thelma Larocca Skare

    2013-04-01

    Full Text Available CONTEXT AND OBJECTIVE Accelerated atherosclerosis has become a major problem in rheumatic inflammatory disease. The aim here was to analyze carotid intima-media thickness (IMT in spondyloarthritis (SpA patients and correlate this with clinical parameters and inflammatory markers. DESIGN AND SETTING Cross-sectional analytical study at Rheumatology Outpatient Clinic, Evangelical University Hospital, Curitiba. METHODS IMTs (measured using Doppler ultrasonography of 36 SpA patients were compared with controls. The IMT in SpA patients was associated with inflammatory markers, like erythrocyte sedimentation rate (ESR, C-reactive protein (CRP and Bath Ankylosing Spondylitis Disease Activity Index (BASDAI; and with clinical parameters, like axial or peripheral involvement, dactylitis, HLA B27, uveitis occurrence, Bath Ankylosing Spondylitis Functional Index (BASFI and lipid profile. RESULTS The mean IMT in SpA patients was 0.72 ± 0.21 mm; in controls, 0.57 ± 0.13 mm (P = 0.0007. There were no associations with ESR, CRP, BASDAI or clinical data. In univariate analysis, greater IMT was seen in patients with longer disease duration (P = 0.014; Pearson R = 0.40; 95% confidence interval, CI = 0.06 to 0.65; higher triglycerides (P = 0.02; Spearman R = 0.37; 95% CI = 0.03 to 0.64; and older age (P = 0.0014; Pearson R 0.51; 95% CI = 0.21 to 0.72. CONCLUSION SpA patients have a higher degree of subclinical atherosclerosis than in controls, thus supporting clinical evidence of increased cardiovascular risk in rheumatic patients. CONTEXTO E OBJETIVO A aterogênese acelerada tem se tornado um grande problema nas doenças reumáticas inflamatórias. O objetivo foi analisar a espessura da camada íntima-média (ECIM da carótida em pacientes com espondiloartrite (ES e relacioná-la com parâmetros clínicos e marcadores inflamatórios. TIPO DE ESTUDO E LOCAL Estudo transversal analítico no Ambulatório de Reumatologia do Hospital Universitário Evangélico de

  8. Breast cancer, poverty and mental health: emotional response to the disease in women from popular classes Cáncer de mama, pobreza y salud mental: respuesta emocional a la enfermedad en mujeres de camadas populares Câncer de mama, pobreza e saúde mental: resposta emocional à doença em mulheres de camadas populares

    Directory of Open Access Journals (Sweden)

    Rodrigo Sanches Peres

    2007-10-01

    Full Text Available This study aimed to analyze the emotional response of a low-income group of women to the breast cancer. The sample was composed by 15 patients from a mastectomized women's support entity. Data were collected through individual face-to-face semi-structured interview. The results were appraised according to a classification system that postulates the existence of four categories mutually excluding: denial, stoicism, affliction and confrontation. The results obtained indicate that stoicism was the more frequent emotional response in the evaluated group. The scientific literature shows that stoicism can contribute to the temporary reduction of stress, but it gradually leads to a uselessness feeling which tends to make difficult the psychosocial adjustment to the disease and its treatment.El presente trabajo tiene como objetivo analizar las reacciones emocionales al cáncer de mama en un grupo de mujeres de clases populares. La muestra fue compuesta por 15 pacientes de una entidad de apoyo a las mujeres mastectomizadas. Datos obtenidos con una entrevista semi-estructurada se apreciaron de acuerdo con un sistema de clasificación que postula la existencia de cuatro categorías que se excluyen mutuamente: rechazo, estoicismo, aflicción y confrontación. Los resultados indican que el estoicismo fue la reacción emocional más frecuente en el grupo evaluado. La literatura científica muestra que el estoicismo puede contribuir a la reducción temporal del stress, pero que lleva gradualmente a un sentimiento de inutilidad qué tiende a crear dificultades para el ajustamiento psico-social a la enfermedad y el tratamiento.O objetivo do estudo foi analisar as reações emocionais ao câncer de mama em um grupo de mulheres de camadas populares. A amostra foi composta por 15 pacientes vinculadas a uma entidade assistencial de apoio a mastectomizadas. Os dados foram coletados mediante o emprego de roteiro semi-estruturado de entrevista individual e apreciados

  9. Aspectos de especificação e implementação da camada de apresentação do padrão map utilizando o ambiente epos

    OpenAIRE

    Paulo Cesar Minoru Inazumi

    1990-01-01

    Resumo: Este trabalho apresenta a implementacão do prolocolo de apresentacão do modelo OSI/ISO para o projelo SISDI-MAP (Sislema Didático MAP). Utilizou-se o ambiente EPOS ("Engineering Project Oriented System") como suporte de desenvolvimento principalmente para a especificação formal da implementação e geração automática de código. Apresentam-se os conceitos referentes à camada de apresentação, o modelo de implementação, alguns aspectos da implementação e da geração automática de código e, ...

  10. Cultivation of Agaricus blazei ss. Heinemann using different soils as source of casing materials Cultivo de Agaricus blazei ss. Heinemann usando diferentes solos como fonte de material para a camada de cobertura

    Directory of Open Access Journals (Sweden)

    Félix Gonçalves de Siqueira

    2009-12-01

    Full Text Available Commercial productivity of the Agaricus blazei mushroom is closely related to both the quality of the compost and the choice of soil to be used as a casing material. This study aims to evaluate Agaricus blazei's productivity using two compost formulations and three soils. The two compost formulations were (i crushed sugarcane bagasse (Saccharum officinarum (L. and Coastcross hay (Cynidon dactylon (L. Pers., and (ii crushed sugarcane bagasse (Saccharum officinarum (L. and corn husk (Zea mays L.; they were amended with wheat bran, lime, gypsum, superphosphate and urea. The casing materials were extracted from three soils classed as Rhodic Hapludox, Xanthic Hapludox, and Humic Haplaquox. The Rhodic Hapludox soil material was mixed with fragments of Eucalyptus charcoal in the proportion of 4:1. The compost was prepared during six weeks and thereafter heat treated during 48 h at the end of the composting period. The sugarcane bagasse:coast-hay compost was superior to the sugarcane bagasse: corn husk compost. The Rhodic Hapludox plus charcoal casing material showed to be a better casing material than either the Xanthic Hapludox and Humic Haplaquox soil materials. The choice of the soils where the casing material is taken is an important factor to the success of the Agaricus blazei mushroom cultivation.A produtividade do cogumelo Agaricus blazei depende da qualidade do composto e da terra de cobertura. Avaliou-se a produtividade deste cogumelo utilizando-se duas formulações de composto e materiais retirados de três tipos de solo usados como camada de cobertura. As duas formulações de composto consistiram em (i bagaço de cana-de-açúcar (Saccharum officinarum (L. e capim Coastcross (Cynidon dactylon (L. Pers., e (ii bagaço de cana-de-açúcar (Saccharum officinarum (L. e palha de milho (Zea mays L.. As duas formulações foram suplementadas com farelo de trigo, calcário, gesso, superfosfato simples e uréia. Como camadas de cobertura foram

  11. CARACTERIZACIÓN DE LA PRODUCCIÓN DE LECHE DE LA CONEJA CON ENFASIS EN LA SUPERVIVENCIA Y CRECIMIENTO DE LA CAMADA EN RAZAS NUEVA ZELANDA BLANCO Y CALIFORNIA

    Directory of Open Access Journals (Sweden)

    Benjamin Gómez-Ramos

    2010-10-01

    Full Text Available El objetivo fue integrar los conocimientos sobre factores genéticos y ambientales que inciden en la producción de leche (PL de la coneja y su efecto en la supervivencia y crecimiento de la camada. Las investigaciones sugieren que la PL se relaciona con el crecimiento y supervivencia del gazapo durante las primeras tres semanas de vida. En cuanto a los aspectos genéticos, se ha estimado que existen diferencias en PL entre razas puras y sus cruzas, además de que el índice de herencia (h2 para PL en Nueva Zelanda Blanco, California y sus cruzas reciprocas es de 0.12%, lo cual establece un mayor efecto ambiental sobre PL. Al parecer la PL alcanza su máxima producción (219.6 g con 12 gazapos/camada y su pico de producción se alcanza al tercer parto y disminuye a partir del quinto parto. Sin embargo, la PL es determinada por: la condición fisiológica de la coneja -lactante-gestante (130 g/día o lactante-no gestante (141 g/día-; el número de pezones, conejas con 10 pezones produjeron 10% más leche que aquellas con 8; la temperatura ambiente, por cada grado centígrado por arriba de 20°C la PL disminuye 7.7 g/día. Los principales factores que influyen sobre la PL de la coneja no son atribuibles a esta. Por lo tanto, es importante controlar la naturaleza aleatoria de la mayoría de los factores no-genéticos que afectan a PL.

  12. Análise da camada de fibras nervosas da retina em usuários crônicos do tabaco e álcool Analysis of retinal nerve fiber layer in chronic tobacco and alcohol users

    Directory of Open Access Journals (Sweden)

    Rita de Cássia Ramos de Lima

    2006-06-01

    Full Text Available OBJETIVOS: Avaliar a camada de fibras nervosas (CFN da retina, através da polarimetria a laser (GDx, em usuários crônicos do tabaco e álcool. MÉTODOS: Foram estudados 46 olhos de 23 indivíduos alcoólatras e tabagistas crônicos triados do Ambulatório de Oftalmologia da Fundação Altino Ventura (grupo estudo. Como grupo controle foram incluídos 32 olhos de 16 voluntários não-usuários do álcool e tabaco, com idade, gênero e raça similares, também triados da Fundação Altino Ventura. Ambos os olhos de todos os indivíduos foram submetidos à análise da camada de fibras nervosas da retina, com aparelho "GDx nerve fiber analyses" pelo mesmo examinador. RESULTADOS: No gráfico Deviation from normal, no grupo estudo ocorreu perda de fibras nervosas da retina em 43,4%, enquanto que no grupo controle houve perda apenas em 18,7%. Quanto aos parâmetros que analisam o GDx, quando comparados o grupo estudo com o grupo controle, observou-se diferença estatisticamente significante nos parâmetros: Ellipse modulation, Inferior ratio e Max modulation. CONCLUSÕES: Os dados comprovam a associação entre o uso crônico do tabaco e álcool e a alteração na camada de fibras nervosas da retina, podendo contribuir para o diagnóstico precoce desta neuropatia.PURPOSES: To evaluate the retinal nerve fiber layer using GDx in chronic alcohol and tobacco users. METHODS: Twenty-three chronic alcohol and tobacco users were studied (study group. As a control group, sixteen volunteers without use of alcohol and tobacco with similar characteristics (age, gender and race were included. Both eyes were tested for analysis of the retinal nerve fiber layer with GDx. RESULTS: There was alteration in the Deviation from normal graph with a loss of nerve fibers in 43.4% of patients in the study group. In the control group this alteration was observed in 14 eyes (18.7%. As regards the parameters that allow comparison between the study and control groups there was

  13. Análise da camada de fibras nervosas pelo GDx em pacientes pseudofácicos com opacidades da cápsula posterior Analysis of the nerve fiber layer using GDx in pseudophakic patients with posterior capsular opacification

    Directory of Open Access Journals (Sweden)

    Tatiana Azevedo Arraes

    2008-02-01

    Full Text Available OBJETIVO: Avaliar se a opacificação de cápsula posterior (OCP influenciaria na análise da camada de fibras nervosas pela polarimetria "scanning laser" (GDx. MÉTODOS: Trinta e sete pacientes pseudofácicos não glaucomatosos foram submetidos a análise da camada de fibras nervosas pelo GDx antes e após a realização de capsulotomia com Nd:YAG laser. RESULTADOS: Em cinco olhos, o GDx não conseguiu imagens aceitáveis pelos parâmetros de aquisição do aparelho. Em todos os outros, não foi observada diferença significante entre os valores médios das variáveis antes e após a realização da capsulotomia posterior. CONCLUSÃO: A presença de OCP em graus moderados e/ou quando há imagens aceitáveis em pacientes pseudofácicos não influencia o resultado da análise das imagens das fibras do nervo óptico pelo GDx. Apenas intensos graus de OCP que impeçam a obtenção de imagem analisável pelo aparelho inviabilizam o exame.PURPOSE: To evaluate if posterior capsule opacification (PCO would alter the analysis of nerve fiber layer using the scanning laser polarimetry (GDx. METHODS: Pseudophakic non-glaucomatosous eyes (37 patients underwent nerve fiber layer analysis using GDx before and after posterior capsulotomy with Nd:YAG Laser. RESULTS: In five eyes, GDx did not obtain acceptable images using the device's parameters of acquisition. In the others, mean variable values did not reach significant difference before and after posterior capsulotomy. CONCLUSION: Moderate degrees of PCO and/or acceptable images in pseudophakic patients do not alter the analysis of nerve fiber layer by GDx. Only intense degrees of PCO that hinder analyzable images make the examination impracticable.

  14. New formulations on the finite element method for boundary value problems with internal/external boundary layers; Novas formulacoes de elementos finitos para problemas de valor de contorno com camadas limite interna/externa

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, Luis Carlos Martins

    1998-06-15

    New Petrov-Galerkin formulations on the finite element methods for convection-diffusion problems with boundary layers are presented. Such formulations are based on a consistent new theory on discontinuous finite element methods. Existence and uniqueness of solutions for these problems in the new finite element spaces are demonstrated. Some numerical experiments shows how the new formulation operate and also their efficacy. (author)

  15. Characterization of a Planetary Boundary Layer model to evaluate radionuclides releases in nuclear installations; Caracterizacao de um modelo de camada limite planetaria para avaliar liberacoes de radionuclideos em instalacoes nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Molnary, Leslie de

    1993-07-01

    A two layer bulk model is used to simulate numerically the time and spatial evolution of concentration of radionuclides in the Planetary Boundary Layer (PBL) for convective and stable conditions. In this model, the closure hypothesis are based on the integrated version of the Turbulent Kinetics Energy (TKE) equation (Smeda,1979). This type of model was adopted here because it is numerically simple to be applied operationally in routine and emergency support systems of atmospheric releases at nuclear power plants, and the hypothesis of the efficiency of the vertical mixing seems to be physically reasonable to simulated PBL evolution for high wind conditions and stable conditions in Subtropical latitudes regions. In order to validate the model to the nuclear power plants of the Centro Experimental Aramar (CEA), located in Ipero, State of Sao Paulo, Brazil, numerical simulations were carried out with initial and boundary conditions based on vertical profiles of temperature and horizontal wind speed and direction obtained from tethered balloon soundings, synoptic charts at 850 hPa and surface observations. Comparisons between a 24 hour long numerical simulation and observations indicate that the model is capable of reproduce the diurnal evolution of temperature and horizontal wind during the convective regime. During stable conditions, the slab model was able to simulate the intensity of the surface inversion as a difference between the mixed layer and surface temperatures. The simulated mixed layer height matches with observations during the convective and stable regime. A daytime release of radionuclides was simulated for CEA region and the results indicated that the maximum relative concentration reaches a distance about 15 Km in 1 hour, varing from 100 times background at the moment of the release to 15 times the background. For night releases, the maximum concentration reaches the same distance in 45 minutes, varing from 100 to 30 times the background values. (author)

  16. Cromatografia em camada delgada para o diagnóstico da intoxicação por aldicarb ("chumbinho" em cães e gatos Thin-layer chromatography for aldicarb poisoning diagnosis in dogs and cats

    Directory of Open Access Journals (Sweden)

    F.G. Xavier

    2007-10-01

    Full Text Available Avaliou-se a cromatografia em camada delgada (CCD como método de diagnóstico toxicológico para os casos de intoxicação por aldicarb em cães e gatos, utilizando-se 50 amostras de conteúdo gástrico obtidas durante a necropsia e 50 amostras de alimentos utilizados como iscas para intoxicar criminalmente os animais. Todas as amostras resultaram positivas para o aldicarb, mostrando ser a CCD uma técnica qualitativa eficiente, rápida e de baixo custo, com uso potencial na toxicologia veterinária forense.The present study concerns about the identification of aldicarb residues using thin-layer chromatography (TLC in 50 samples of gastric content obtained from the necropsy of dogs and cats and 50 samples of foods suspected of being used as baits. All samples resulted positive for aldicarb showing that the TLC is an efficient, fast and not expensive qualitative method for the detection of aldicarb, being useful for this purpose in the forensic veterinary toxicology.

  17. Para uma sistematização genealógica das camadas de significado da ‘cebola de significância’: a perspectiva do falante - doi: 10.4025/actascilangcult.v35i4.15483

    Directory of Open Access Journals (Sweden)

    Selmo Ribeiro Figueiredo Junior

    2013-09-01

    Full Text Available Considerando a perspectiva do ouvinte na comunicação, Dascal (2006 apresenta seu modelo da ‘cebola de significância’ (CS como visão acerca do significado de uma elocução, concebendo-o como um conjunto de diferentes camadas. Neste trabalho, proporemos abordar a CS pela perspectiva do ‘falante’ (CSF e adicionalmente sistematizá-la. A sistematização consistirá em identificar os elementos da elocução sob um ordenamento hierárquico, cuja sequência proposta é (entre parênteses, os elementos contingentes da CSF: pressuposições pragmáticas; razão da elocução; conteúdo proposicional da sentença; (informação conscientemente não intencional; (componente emotivo de significado; interferência do registro conversacional; condições de felicidade do ato de fala; força perlocucionária; (implicatura conversacional; modalidade; força ilocucionária; caráter nêustico da elocução. A discussão que faremos, dedutivamente orientada, procura justificar as razões dessa elaboração.

  18. Produção de chapas de partículas orientadas “OSB” de Eucalyptus grandis com diferentes teores de resina, parafina e composição em camadas.

    Directory of Open Access Journals (Sweden)

    Setsuo Ivakiri

    2010-08-01

    Full Text Available Este trabalho foi desenvolvido com o objetivo de avaliar a influência dos seguintes parâmetros de processo de produção sobre as propriedades das chapas "OSB": composição das chapas em camadas cruzadas com proporções face-miolo-face de 30-40-30 e 20-60-20 em relação à composição homogênea; e, quantidades de 3, 4,5 e 6,0% de resina fenol-formaldeído, com incorporação de 0,5 e 1,0% de emulsão de parafina. Os resultados demonstraram que a composição das chapas, com a relação 20-60-20, apresentou melhor balanço das propriedades de flexão estática entre os sentidos de ensaios paralelo e perpendicular ao plano da chapa. A quantidade de 6,0% de resina foi a que resultou em melhores propriedades físico-mecânicas das chapas "OSB". A produção de chapas "OSB" de Eucalyptus grandis, com 4,5 e 6,0% de resina fenol-formaldeído, superou as exigências mínimas de propriedades mecânicas das chapas "OSB" referendadas pela norma canadense CSA 0437-0 (1993.

  19. Interações analógico e digital móvel na mídia impressa: camadas informacionais na narrativa com QR Code, Aurasma e Realidade Aumentada

    Directory of Open Access Journals (Sweden)

    Fernando Firmino da Silva

    2013-08-01

    Full Text Available Este artigo discute a adoção de inovações no jornalismo impresso como QR Code, Aurasma, Realidade Aumentada, 3D como processos de complexificação das narrativas e das estratégias construídas como modelo de negócios nas organizações jornalísticas a partir das apropriações das tecnologias móveis digitais. As camadas informacionais (interativas, multimídia, metadados oriundas desses recursos compartilham da noção defendida por McLuhan (2005 de que os meios se refletem um no outro, reinventam-se. A abordagem se centra na análise dessas interações analógico-digital e de natureza móvel partindo da observação de que o jornalismo impresso procura introduzir nos seus projetos gráficos essa perspectiva visando se modernizar para "fisgar" ou manter os leitores através da conexão entre plataformas com o incremento às narrativas de recursos dinâmicos que vão além do próprio suporte, como nos casos em debate.

  20. Ensaios de campo para determinação de emissões de biogás em camadas de cobertura de aterros de resíduos sólidos Field tests for biogas emissions determination in cover layers of municipal solid waste landfills

    Directory of Open Access Journals (Sweden)

    Maria Odete Holanda Mariano

    2010-09-01

    Full Text Available Este trabalho apresenta uma metodologia de campo utilizada para determinar as emissões de biogás através das camadas de cobertura de aterros de resíduos sólidos urbanos, por meio de ensaios simples, diretos e de baixo custo. Os resultados obtidos nesses estudos indicaram que o fluxo de metano (CH4 pode atingir valores de até 150 kg/m². ano, o que representa 630 mil toneladas do CO2eq por ano em um simples aterro de 20 hectares. A espessura da camada de cobertura, que variou entre 0,2 e 0,7 m, não foi um fator relevante nas emissões medidas, enquanto que as pressões de biogás no contato camada-lixo, com valores acima de 500 Pa, favorecem a formação de microfissuras no solo da camada de cobertura, o que eleva as emissões de gases nesses pontos.This paper presents a field methodology used to determine emissions of biogas through the cover layers of municipal solid waste landfills, by means of simple, straightforward and inexpensive tests. The results from these studies indicated that the flow of methane (CH4 can reach values up to 150 kg/m². year, representing 630,000 tons of CO2eq per year in a mere 20 hectares of landfill. The thickness of the cover layer, which ranged between 0.2 and 0.7 m, was not a relevant factor in the measured emissions, while the pressure of biogas in the contact layer-waste, with values above 500 Pa, favors the formation of microcracks on the soil of the cover layer, which increases the emissions of gases in these points.

  1. Validation of the FDG (18F) radiochemical purity assay by thin layer chromatography; Validacao do ensaio de pureza radioquimica do FDG (18F) por cromatografia em camada delgada

    Energy Technology Data Exchange (ETDEWEB)

    Leao, R.L.C.; Oliveira, M.L.; Nascimento, J.E.; Nascimento, N.C.E.S., E-mail: renata.lleao@hotmail.com [Centro Regional de Ciencias Nucleares do Nordeste (CRCN-NE/CNEN-PE), Recife, PE (Brazil). Div. de Producao de Radiofarmacos

    2013-08-15

    All methodologies utilized in radiopharmaceutical industry should be validated in order to prove that they meet the requirements of analytical applications, ensuring the reliability of the results. At a radiopharmaceutical industry there is one challenge aspect: sometimes it is not possible use a stable standard to perform the validation analysis. In order to overcome this difficulty, the objective of this study was to suggest a validation protocol for these methodologies, based on the recommendations of RE n° 899/Agencia Nacional de Vigilancia Sanitaria (ANVISA), and prove its efficiency, performing the radiochemical purity validation test of FDG (18F), by TLC. To obtain the calibration curve, we suggested that the theoretical activity values should be determined using a dose calibrator, simultaneously of each analysis performed by TLC, for 5 hours. The method was linear (R{sup 2} of 0.996), precise (CV% <5%) and accurate (96.85% < accuracy < 102.56%). In relation to the robustness test, our experiments evaluated the influence of the distance travelled by mobile phase, variations at mobile phase concentration and type of chromatographic plate (silica gel on glass or aluminium plates). The detection and quantification limits were determined (321.9 and 1065.6 kBq, respectively). As expected, this methodology was nonspecific, showing a slight spot corresponding to the FDM. The proposed protocol was efficient and the methodology tested was effective to determine the radiochemical purity of FDG (18F), in accordance to the limits recommended by ANVISA. (author)

  2. Influence of the inter-layer adhesion on the structural strength of sandwich pipes; Influencia da adesao entre camadas na resistencia estrutural de dutos sanduiche

    Energy Technology Data Exchange (ETDEWEB)

    Castello, Xavier; Estefen, Segen [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia. Programa de Engenharia Oceanica

    2005-07-01

    Sandwich pipes composed of two steel layers separated by a polypropylene annulus can be used for the transport of oil and gas in deep waters, combining high structural resistance with thermal insulation in order to prevent blockage by paraffin and hydrates. In this work, sandwich pipes with typical inner diameters of those employed in the offshore production are analyzed numerically regarding to the influence of the inter-layer adhesion of steel pipes and polymer on the limit strength under external pressure and longitudinal bending as well as the bending and straightening process representative of the reeling installation method. The numerical model incorporates geometric and material non-linearity, which had been based on previous works of the authors. Tests of specimens under tension and segments of sandwich pipes are carried through to evaluate the maximum shear stresses of the interfaces metal-polymer. The adhesion is modeled by contact adopting a maximum shear stress value to allow the relative displacement between the layers. It was observed that the structural resistance of the sandwich pipe is strongly dependent on the shear stress acting at the interface, occurring the collapse of the pipe when the maximum shear stress is reached. The results obtained are analyzed to determine the minimum shear strength at the union which provides adequate structural resistance for the sandwich pipe under representative conditions of the installation and operation loading phases. (author)

  3. O potencial de geração CBM (Coalbed Methane na jazida Sul Catarinense: 1. Características petrográficas e químicas das camadas de carvão da Formação Rio Bonito, Permiano da Bacia do Paraná

    Directory of Open Access Journals (Sweden)

    Priscila dos Santos Lourenzi

    Full Text Available Atualmente, o CBM representa uma importante fonte de energia alternativa. A mais importante sucessão sedimentar portadora de carvão no Brasil ocorre na Bacia do Paraná, com as maiores reservas localizadas nas jazidas do RS e de SC. Este trabalho tem por objetivo analisar as características químicas e petrográficas das camadas de carvão de três poços, realizados recentemente na jazida Sul Catarinense (SC nos municípios de Treviso e Araranguá, com o intuito de avaliar a capacidade de geração de gás metano associado. Foram coletadas amostras de sete camadas de carvão (Barro Branco, Irapuá, A, Bonito Superior, Bonito Inferior, Pré-Bonito Superior e Pré-Bonito Inferior da Formação Rio Bonito que foram submetidas à análise petrográfica e química. O litotipo carvão fosco bandado (BD predominou no CBM-SC-2012, e carvão fosco (D, no CBM-SC-2013. Os resultados petrográficos indicaram valores de 0,60 a 1,26 Rrandom (%, classificando o carvão segundo o rank desde betuminoso alto volátil C até betuminoso médio volátil. A análise de macerais mostra variação na composição das camadas, com predomínio de vitrinita e inertinita. Quanto à análise imediata, as amostras variaram de 34,93 a 65,70% em peso de cinza. O poder calorífico varia de 1858,0 a 5074,8 cal/g. O conteúdo de carbono varia de 4,15 a 65,81%, e o enxofre, de 0,22 a 12,43%. De acordo com os parâmetros analisados, as camadas Barro Branco e Irapuá apresentam as condições necessárias para geração e armazenagem de gás natural, enquanto a camada Bonito apresenta baixo potencial devido ao alto conteúdo de matéria mineral.

  4. Alteração da camada de fibras nervosas da retina em usuários crônicos de cloroquina Retinal nerve fiber layer alteration in chronic users of chloroquine

    Directory of Open Access Journals (Sweden)

    Daniela de Almeida Lyra Antunes

    2005-04-01

    Full Text Available OBJETIVOS: Avaliar a camada de fibras nervosas da retina (CFN por meio da polarimetria a laser, em pacientes em uso crônico de cloroquina. MÉTODOS: Foram estudados 44 olhos de 22 pacientes em uso de cloroquina por doenças reumatológicas, por pelo menos um ano. Como controle, foram incluídos vinte indivíduos sem uso de cloroquina com idade, gênero e raça similares. Foram excluídos os pacientes que apresentavam história familiar de hipertensão ocular ou glaucoma. Ambos os olhos foram submetidos à análise da camada de fibras nervosas da retina, com o aparelho GDx® Nerve Fiber Analyser, pelo mesmo examinador. RESULTADOS: Nos usuários crônicos de cloroquina, verificou-se alteração em mais de dois parâmetros do GDx em 28 olhos (63,6%. Ocorreu também alteração no gráfico "Deviation from normal" com perda de fibras nervosas em 11 olhos (25%. Quando comparado com o grupo controle, os parâmetros que demonstraram diferença estatisticamente significante foram: Superior Ratio, Inferior Ratio, Superior Nasal, Elipse Modulation, The Number, Superior Average e Superior Integral. Houve também associação estatisticamente significante entre o tempo de uso de cloroquina e perda da CFN. CONCLUSÕES: Comprovou-se a associação entre o uso crônico da cloroquina e a alteração da CFN detectada pelo GDx. Desta forma, esses resultados podem contribuir para o diagnóstico precoce da perda de fibras nervosas na retinopatia por cloroquina.PURPOSES: To evaluate the retina nerve fiber layer by laser polarimetry in patients in chronic use of chloroquine. METHODS: Forty-four eyes of twenty-two patients were studied. These were in use of chloroquine due to rheumatic diseases during at least one year. As a control group, twenty patients without use of chloroquine with similar characteristics (age, gender and race were included. Patients who had a family history of ocular hypertension or glaucoma were not included in this group. Both eyes were

  5. Metodologia para observação da camada de cera em maçãs, utilizando microscopia eletrônica de varredura Methodology for observation of the wax layer in apples, using scanning electron microscopy

    Directory of Open Access Journals (Sweden)

    Luis Antônio Suita de Castro

    2002-12-01

    Full Text Available A estrutura mais superficial da epiderme dos frutos é constituída por fina camada de cera, responsável por mecanismos de proteção, principalmente relacionados à evapotranspiração e ao ataque de patógenos. A visualização de cera por microscopia eletrônica de varredura apresenta dificuldades no processamento da amostra, pois os métodos rotineiramente utilizados ocasionam sérios danos a esta camada ou, simplesmente, provocam sua eliminação devido ao processo de solubilização causado pelos reagentes utilizados. Alguns autores têm utilizado temperaturas baixas (-90ºC para o processamento de amostras. No Brasil, tentativas de observação de cera em maçãs, utilizando a microscopia eletrônica de varredura, têm sido realizadas; entretanto, os resultados não foram satisfatórios. No Laboratório de Microscopia Eletrônica da Embrapa Clima Temperado, foi adaptado um método simples e que tem apresentado bons resultados. Para este experimento, foram retiradas pequenas porções da casca de maçãs da região equatorial dos frutos. As amostras foram fixadas em lâminas histológicas, utilizando fita adesiva nas extremidades. Posteriormente, foram colocadas em dessecador contendo sílica gel, para que ocorresse a desidratação. Após 72 horas, foram retirados fragmentos para fixação em stubs e metalização com ouro. Foi usado um microscópio eletrônico ZEISS (DSM-940A, regulado à distância de trabalho de 15mm, voltagem de aceleração de 10 kV e ampliação de 3.000 X. As imagens obtidas permitiram avaliar a interferência dos fatores ambientais utilizados no processo de frigoconservação de maçãs.The fruit epidermis is covered by a thin layer of wax which gives protection to the fruit, mainly against water loss and pathogenic organisms. Several studies using scanning electron microscope have been developed to study that wax. The wax layer visualization through the scanning microscope is difficult due to some problems of

  6. Família, Gênero e Juventude: Sobre o Processo de Individuação de Jovens de Camadas Médias e Relações de Reciprocidade entre as Gerações

    Directory of Open Access Journals (Sweden)

    Flávia Maria Silva Rieth

    2012-09-01

    Full Text Available Atenta-se para o modo como a vida é periodizada entre jovens de camadas médias do interior, considerando, o prolongamento da juventude e as relações de reciprocidade entre as gerações na família. A juventude é aqui percebida como um  processo  que se delineia a partir das carreiras: escolar  -  profissional e familiar  –  conjugal que configuram as experiências de aquisição dos valores da maturidade, ou seja, de individuação dos sujeitos de camadas médias. Retomou-se o contato com os jovens investigados na pesquisa Sexo, Amor e Moralidade (RIETH, 2001, sendo entrevistados vinte jovens, 10 homens e 10 mulheres entre 19 e 32 anos. A emancipação do sujeito frente à família de origem e, consequentemente a manutenção de relacionamentos conjugais assume diferenças de gênero. Observa-se o quanto a passagem do tempo impõe a reciprocidade entre as gerações no interior da família, em que as jovens se orientam mais pela relação com a família de origem e os rapazes pela ética do provedor.Palavras-chave: Família, Gênero, Juventude. ABSTRACT:  It is called the attention to the way life is prioritized between youngsters of countryside medium social strata, considering, youth prolongation and the relations of reciprocity between the generations in the family. Youth is perceived here as a process which it is outlined from the careers: school-  professional and family related  –  marital which configure the experiences of acquisition of maturity values, that is, of individualization of subjects of medium social strata. It has been resumed contact with youngsters investigated in the research  Sex, Love and Morality  (RIETH, 2001, 20 youngsters were interviewed, 10 men and 10 women aged between 19 and 32. The emancipation of the subject before the family of origin and, consequently the maintenance of marital relationships assumes differences of genders. It is observed how much the passage of

  7. PRODUÇÃO DE CHAPAS DE PARTÍCULAS ORIENTADAS “OSB” DE Eucalyptus grandis COM DIFERENTES TEORES DE RESINA, PARAFINA E COMPOSIÇÃO EM CAMADAS

    Directory of Open Access Journals (Sweden)

    Setsuo Iwakiri

    2002-10-01

    Full Text Available Este trabalho foi desenvolvido com o objetivo de avaliar a influência dos seguintes parâmetros de processo de produção sobre as propriedades das chapas “OSB”: composição das chapas em camadas cruzadas com proporções face-miolo-face de 30-40-30 e 20-60-20 em relação à composição homogênea; e, quantidades de 3, 4,5 e 6,0% de resina fenol-formaldeído, com incorporação de 0,5 e 1,0% de emulsão de parafina. Os resultados demonstraram que a composição das chapas, com a relação 20-60-20, apresentou melhor balanço das propriedades de flexão estática entre os sentidos de ensaios paralelo e perpendicular ao plano da chapa. A quantidade de 6,0% de resina foi a que resultou em melhores propriedades físico-mecânicas das chapas “OSB”. A produção de chapas “OSB” de Eucalyptus grandis, com 4,5 e 6,0% de resina fenol-formaldeído, superou as exigências mínimas de propriedades mecânicas das chapas “OSB” referendadas pela norma canadense CSA 0437-0 (1993.

  8. Modelos de dupla camada difusa de Gouy-Chapman e Stern aplicados a latossolos ácricos paulistas Gouy-chapman and Stern diffuse double layer models applied to acric oxisols from the state São Paulo - Brazil

    Directory of Open Access Journals (Sweden)

    L.R.F. Alleoni

    1994-08-01

    Full Text Available Modelos teóricos da dupla camada difusa de Gouy-Chapman e de Stern foram aplicados a um latossolo variação Una ácrico, de Guaira e a dois latossolos roxos ácricos, localizados em Ribeirão Preto e Guaíra, cidades ao norte do Estado de São Paulo, onde solos com caráter ácrico ocupam vasta área nas quais são cultivadas várias culturas de interesse econômico. Na concentração mais elevada do eletrólito suporte (KCl 0,1N, os dados obtidos em laboratório adaptaram-se melhor ao modelo de Stern. Entretanto, nas menores concentrações (KCl 0,01 e 0,001N, correspondentes a valores mais comuns encontrados em solos altamente intemperizados, o modelo de Gouy-Chapman representou melhor a variação da densidade superficial de carga com o potencial elétrico das amostras estudadas.Theoretical models of Gouy-Chapman and Stern, referred to diffuse double layer, were applied to three acric Oxisols, two named dusky red latosol and one Una variant latosol, from the São Paulo State - Brazil. Samples were collected in Ribeirão Preto and Guaira, regions of large occurrence of these soils, supporting many economic crops. In the highest concentration of the electrolyte (KC1 0.1N, the obtained values were better related to the Stern model. On the other hand, in more dilluted solutions (KC1 0.01 and 0.001N, corresponding to more usual ionic strenght of highly weathered soils, the variation of surface charge density of the samples with electric potential was in better agreement with the Gouy-Chapman theory.

  9. Reprodutibilidade do exame de medida da camada de fibras nervosas da retina por meio da polarimetria de varredura a laser Reproducibility of retinal nerve fiber layer measurement by scanning laser polarimetry

    Directory of Open Access Journals (Sweden)

    Fernanda Bon Duarte

    1999-10-01

    Full Text Available Objetivo: Analisar a reprodutibilidade das medidas da espessura da camada de fibras nervosas da retina intra e inter-observador. Material e Métodos: As medidas da camada de fibras nervosas foram realizadas em 26 olhos normais por três examinadores diferentes, os quais tomaram três imagens de cada olho. Com base nestas imagens foi executada a média das imagens pelo programa do aparelho. A cada examinador foi solicitado que escolhesse a melhor imagem para cada exame. Foram analisados os resultados obtidos com a melhor imagem, bem como os da média das imagens. Foi calculada a média da espessura da camada de fibras nervosas nas regiões superior, nasal, temporal e inferior e suas relações. Determinou-se a reprodutibilidade nestas circunstâncias tanto inter como intra-observador por meio de teste de análise de variância por postos de Friedman. Resultados: Na análise intra-observador houve ótima reprodutibilidade do exame. Para o examinador G (glaucomatólogo os valores de p foram os seguintes: região superior = 0,48; inferior = 0,89; temporal = 0,30 e nasal = 0,89. Para o examinador R (residente os valores de p foram os seguintes: região superior = 0,89; inferior = 0,24; temporal = 0,89 e nasal = 0,30 e para o examinador T (tecnóloga os valores de p foram os seguintes: região superior = 0,76; inferior = 0,70; temporal = 0,22 e nasal = 0,63. Na análise inter-observador, não foi observada diferença estatisticamente significante das variáveis isoladas considerando-se a média das imagens (p superior = 0,52; inferior = 0,37; temporal = 0,43 e nasal = 0,52. Considerando-se as relações entre as regiões temos que apenas a relação S/I mostrou diferença estatisticamente significante. As demais relações: S/T, S/N, I/T, I/N e T/N não mostraram diferença estatisticamente significante. Para a melhor imagem observou-se diferença estatisticamente significante entre os três examinadores para as variáveis superior/temporal (p = 0

  10. Current limiters

    Energy Technology Data Exchange (ETDEWEB)

    Loescher, D.H. [Sandia National Labs., Albuquerque, NM (United States). Systems Surety Assessment Dept.; Noren, K. [Univ. of Idaho, Moscow, ID (United States). Dept. of Electrical Engineering

    1996-09-01

    The current that flows between the electrical test equipment and the nuclear explosive must be limited to safe levels during electrical tests conducted on nuclear explosives at the DOE Pantex facility. The safest way to limit the current is to use batteries that can provide only acceptably low current into a short circuit; unfortunately this is not always possible. When it is not possible, current limiters, along with other design features, are used to limit the current. Three types of current limiters, the fuse blower, the resistor limiter, and the MOSFET-pass-transistor limiters, are used extensively in Pantex test equipment. Detailed failure mode and effects analyses were conducted on these limiters. Two other types of limiters were also analyzed. It was found that there is no best type of limiter that should be used in all applications. The fuse blower has advantages when many circuits must be monitored, a low insertion voltage drop is important, and size and weight must be kept low. However, this limiter has many failure modes that can lead to the loss of over current protection. The resistor limiter is simple and inexpensive, but is normally usable only on circuits for which the nominal current is less than a few tens of milliamperes. The MOSFET limiter can be used on high current circuits, but it has a number of single point failure modes that can lead to a loss of protective action. Because bad component placement or poor wire routing can defeat any limiter, placement and routing must be designed carefully and documented thoroughly.

  11. Quench limits

    International Nuclear Information System (INIS)

    Sapinski, M.

    2012-01-01

    With thirteen beam induced quenches and numerous Machine Development tests, the current knowledge of LHC magnets quench limits still contains a lot of unknowns. Various approaches to determine the quench limits are reviewed and results of the tests are presented. Attempt to reconstruct a coherent picture emerging from these results is taken. The available methods of computation of the quench levels are presented together with dedicated particle shower simulations which are necessary to understand the tests. The future experiments, needed to reach better understanding of quench limits as well as limits for the machine operation are investigated. The possible strategies to set BLM (Beam Loss Monitor) thresholds are discussed. (author)

  12. Dose limits

    International Nuclear Information System (INIS)

    Fitoussi, L.

    1987-12-01

    The dose limit is defined to be the level of harmfulness which must not be exceeded, so that an activity can be exercised in a regular manner without running a risk unacceptable to man and the society. The paper examines the effects of radiation categorised into stochastic and non-stochastic. Dose limits for workers and the public are discussed

  13. Inverse Limits

    CERN Document Server

    Ingram, WT

    2012-01-01

    Inverse limits provide a powerful tool for constructing complicated spaces from simple ones. They also turn the study of a dynamical system consisting of a space and a self-map into a study of a (likely more complicated) space and a self-homeomorphism. In four chapters along with an appendix containing background material the authors develop the theory of inverse limits. The book begins with an introduction through inverse limits on [0,1] before moving to a general treatment of the subject. Special topics in continuum theory complete the book. Although it is not a book on dynamics, the influen

  14. Dysfunction of the temporalis muscle after pterional craniotomy for intracranial aneurysms: comparative, prospective and randomized study of one flap versus two flaps dieresis Disfunção do músculo temporal após craniotomia pterional para tratamento de aneurismas intracranianos: estudo comparativo, prospectivo e aleatório da diérese em camada única versus camada dupla

    Directory of Open Access Journals (Sweden)

    FRANCISCO CARLOS DE ANDRADE JR.

    1998-06-01

    Full Text Available Patients with intracranial aneurysm(s of the carotid artery territory, treated with pterional craniotomy, were prospectively and randomly addressed to one layer flap (n=36 or myocutaneous (MC versus two layers' dieresis (n=32 or interfascial (IF. The study protocol included the patient's sex, age, area of craniotomy, time of flap dieresis and synthesis, time of bone dieresis and synthesis, the intracranial time, including dura mater dieresis and synthesis and time of flap retraction. Before and after surgery, the patients were evaluated with examination specially oriented to V and VII cranial nerves, bi-temporal diameter measurement, the symmetry of the temporal region, tempora-mandibularis joint (TMJ movements and cranial CT scan. The evaluations of the TMJ dysfunctions were postoperative pain, movement limitations at mastication, occlusion, mouth aperture and lateral movements of the jaw. The statistical analysis showed that the incidence of pain at TMJ and moderate and severe temporalis muscle atrophy was observed, comparing MC and IF, and there were significant differences among these ones, being greater in IF group. We concluded that both techniques permit equivalent access to the studied intracranial aneurysm(s, and the atrophy of temporalis muscle, pain and movement limitations of the temporomandibularis joint were prevalent, worse and more long-lasting in two-layers flap dieresis than in one-layer flap dieresis.Pacientes com aneurisma(s intracraniano(s foram tratados pela via pterional e de modo prospectivo e aleatório submetidos às variantes técnicas, miocutânea (MC(n=36 ou em retalho único e interfascial (IF (n=32 ou em retalho duplo. No protocolo foram anotados o sexo, idade, área da craniotomia, período de diérese e síntese do retalho, período de diérese e síntese óssea, o período do procedimento intracraniano, incluindo o tempo de diérese e síntese da dura-máter e o período de retração do retalho. Os pacientes

  15. A escola de qualidade para todos: abrindo as camadas da cebola La escuela de calidad para todos: abriendo las cáscaras de la cebolla Qualified school for all: opening the peels of the onion

    Directory of Open Access Journals (Sweden)

    Candido Alberto Gomes

    2005-09-01

    Full Text Available A pesquisa educacional apresenta hoje abundantes constatações sobre como construir uma escola de qualidade para todos. Este trabalho se concentra em aspectos selecionados das diferenças entre escolas e dentro das escolas, com base na literatura nacional e internacional, embora mencionando a importância das origens sociais dos alunos, gestão educacional, avaliação e trajetórias curriculares. A estrutura peculiar dos sistemas educacionais se assemelha a uma cebola, com sucessivas camadas que influenciam a aprendizagem. Assim, se destacam despesas, instalações, tempo letivo, professores, clima e gestão escolares, efeitos dos colegas, alocação da matrícula e do espaço, ações que contribuem para a efetividade na sala de aula e a formação de turmas. Portanto, é possível atuar sobre os fatores intra-escolares, no seu âmbito de influência, que têm papel mais amplo nos países em desenvolvimento.La investigación educativa presenta hoy una gran cantidad de resultados capaces de orientar la construcción de una escuela de calidad para todos. Este trabajo hace la reseña de factores seleccionados de las diferencias entre las escuelas y en el interior de ellas, según la literatura nacional y internacional. Aunque reconozca la importancia de los orígenes sociales de los estudiantes, de la gestión de los sistemas educativos, de la evaluación y de las diferentes trayectorias curriculares, este trabajo considera la estructura particular de los sistemas, semejante a una cebolla, con sus successivas cáscaras y sus relaciones con el aprendizaje. De este modo, destaca los gastos, instalaciones y recursos, tiempo, magistério, clima y gestión de las escuelas, efectos de los compañeros, administración de la matrícula y de las relaciones espaciales y agrupamiento de secciones. Así, es posible actuar sobre los factores internos de la escuela, que tiene un rol más influyente en los países en desarrollo.Educational research presents

  16. Estudo das propriedades físicas e de transporte na secagem de cebola (Allium cepa L. em camada delgada Study of the physical and transport properties in the onion (Allium cepa L. drying in thin layer

    Directory of Open Access Journals (Sweden)

    Pierre Corrêa Martins

    2004-09-01

    Full Text Available Neste trabalho estudou-se a cinética de secagem da cebola em camada delgada, comparando os valores da difusividade efetiva média baseados nas espessuras inicial e média das amostras. Estes resultados foram utilizados para a estimativa da temperatura das amostras através de um modelo térmico simplificado. Foram analisadas também as propriedades físicas e de transporte das amostras em função da umidade ao longo da operação. Os ensaios de secagem foram realizados em um secador com escoamento de ar perpendicular à área de seção transversal do leito de amostras de cebola, operando com Tar=60ºC e v ar=1,5m/s. A determinação da umidade de equilíbrio foi obtida através das isotermas de dessorção e a temperatura das amostras foi determinada por meio de um termopar inserido no centro da partícula. As massas específicas das amostras aparente e absoluta foram determinadas através dos métodos indireto e destrutivo, respectivamente. Os valores da difusividade efetiva variável de umidade foram obtidos através do método das tangentes. O modelo térmico simplificado apresentou melhor ajuste com os valores da difusividade efetiva média de secagem, baseados na espessura média. Os valores das massas específicas das amostras de cebola aparente e absoluta foram ajustados em função da umidade através da equação de LOZANO, ROTSTEIN & URBICAIN [10], apresentando coeficientes de correlação maiores que 96%. A redução de espessura do material foi de 80% em relação a da amostra inicial. Os resultados da difusividade efetiva média de umidade, baseados na espessura média das amostras, foram semelhantes aos valores médios da difusividade efetiva variável de umidade para a primeira etapa de secagem.In this work it was studied the onion drying kinetics in thin layer comparing the values of the drying difusivity effective average based on the initial and average thickness of the samples. These results were fitted to a simplified

  17. Avaliação da espessura da camada de fibras nervosas da retina e mácula em pacientes com ambliopia Thickness of the retinal nerve fiber layer, macular thickness, in patients with amblyopia

    Directory of Open Access Journals (Sweden)

    Juliana Mitre

    2010-02-01

    Full Text Available OBJETIVO: Avaliar a espessura da camada de fibras nervosas da retina em olhos amblíopes e comparar com olhos normais e certificar se há correlação com a redução da acuidade visual. Além disso, este estudo se propõe avaliar a eficácia e eficiência em uma série de casos do protótipo de um equipamento nacional de magnificação para leitura. MÉTODOS: Participaram deste estudo 30 pacientes na faixa etária entre 9 e 80 anos (17 do sexo masculino. Foi desenvolvido um aparelho portátil, patenteado pela Unifesp (PI#020050145260, com um sistema de captura de imagens acoplado a um monitor de 5,6 polegadas proporcionando um aumento de 15 x. Foram analisadas a eficácia da acuidade visual e a eficiência de leitura após a utilização do protótipo proposto. RESULTADOS: Seis pacientes (20% apresentaram AV 8M, 12 pacientes (40% apresentaram AV 6M, 7 pacientes (23,3% apresentaram 5 M, 5 pacientes (16,7% apresentaram 4M. A média de acuidade visual antes da utilização do SLP medida pela tabela LHNV-1 logMAR foi de 5,75M e após a utilização 100% dos pacientes atingiram a eficácia de AV J1. CONCLUSÃO: O protótipo do SLP mostrou-se um recurso alternativo no processo de inclusão social das pessoas com baixa visão com diferentes níveis de resíduo visual. Também pode proporcionar incentivo psicológico, permitir conforto, mobilidade e independência àqueles que necessitam de uma leitura mais prolongada e maior distância de trabalho.OBJECTIVE: To compare the thickness of the retinal nerve fiber layer (RNFLand the macular thickness of the amblyopic eye with those of the non-amblyopic eye in patients with unilateral amblyopia using optical coherence tomography (OCT. METHODS: OCT was performed for13 patients with unilateral amblyopia who had no neurologic disease. Nine male andfour female patients, whose ages ranged from 23 to 63 years, were enrolled in the study. The RNFL thickness average analysis program was used to evaluate mean

  18. Sexualidade e gravidez na adolescência entre jovens de camadas médias do Rio de Janeiro, Brasil Middle-class teenage sexuality and pregnancy in Rio de Janeiro, Brazil

    Directory of Open Access Journals (Sweden)

    Elaine Reis Brandão

    2006-07-01

    Full Text Available Aborda-se a gravidez na adolescência entre jovens de camadas médias, prisma pouco estudado no Brasil. Realizou-se um estudo qualitativo sócio-antropológico com 14 famílias do Rio de Janeiro, Brasil, cujos filhos permaneciam solteiros e residindo com os pais, após o nascimento da criança. Foram realizadas 25 entrevistas em profundidade com 6 rapazes e 7 moças entre 18 e 24 anos e seus pais (11 mães e 1 pai, para avaliação retrospectiva da gravidez e de seus impactos na trajetória juvenil e familiar. Três aspectos são analisados: as dificuldades de internalização da norma contraceptiva; a descoberta tardia da gravidez e a tomada de decisão ­ aborto ou reprodução ­ pelos jovens e seus pais. O estudo permitiu configurar a gravidez na adolescência como um evento contingente ao processo de construção da autonomia pessoal em curso nessa fase da vida, no qual a sexualidade tem grande relevância. Conclui-se que o fenômeno precisa ser compreendido em um contexto histórico e cultural específico, distinto de sua ocorrência décadas atrás, pois está marcado pelas regras que organizam o processo de individualização juvenil na contemporaneidade.The subject of this paper is teenage pregnancy among middle-class youth, a topic not sufficiently studied in Brazil. The paper is based on a qualitative, socio-anthropological study of 14 middle-class families in Rio de Janeiro, Brazil, whose children have remained single, living with their parents after the child's birth. A total of 25 in-depth interviews were conducted with 6 young men and 7 young women, ages 18 to 24, and their parents (11 mothers, one father, to examine the event in retrospect and its impact on these young people and their families. Three aspects are analyzed: difficulties young people face in internalizing contraception as a norm; late discovery of pregnancy; and how the decision to either have an abortion or give birth is made by young people and their parents

  19. Filtração de aerossóis em altas temperaturas utilizando filtros cerâmicos de dupla camada: influência do diâmetro de partícula na eficiência de coleta Filtration of aerosols at high temperatures using a double layer ceramic filter: influence of the particle diameter in the collection efficiency

    Directory of Open Access Journals (Sweden)

    N. L de Freitas

    2004-12-01

    Full Text Available Neste trabalho foram utilizados filtros cerâmicos para filtração de aerossóis, constituídos por dupla camada, onde a primeira camada é formada por um suporte celular de elevada porosidade com diâmetro de poro controlado e a segunda formada por uma película filtrante. A camada suporte foi obtida pela técnica de replicação cerâmica de espuma poliuretânica, por meio da impregnação de uma suspensão aquosa de Al2O3. Foram utilizados suportes de 45 e 75 poros/polegada. A membrana filtrante (Al2O3 e argila foi a mesma para ambos os suportes, sendo composta por uma massa granular cerâmica de baixa porosidade. Os experimentos de filtração foram realizados em temperaturas de 25 a 700 ºC onde mediu-se a capacidade dos filtros de limpar um aerossol de partículas finas polidispersas (diâmetro mediano de 4,6 µm e calculou-se a eficiência de coleta para diâmetros de partícula entre 0,4 e 8,5 µm. Os resultados mostraram que a eficiência diminuiu com o aumento da temperatura e aumentou com o diâmetro da partícula.In this work, ceramic filters were used for aerosol filtration. The filters were constituted by two layers, where the first layer was formed by of a highly porous ceramic support with controlled pore size and the second layer constituted by a fine membrane. The ceramic support was obtained from polymeric foams utilizing a technique of alumina impregnation. The supports had 45 and 75 pores per inch (ppi. The membrane (a mixture of alumina and clay was the same for the two supports, with much smaller pore sizes. The filtration experiments were accomplished at temperatures varying from 25 to 700 ºC, where the ability of the filters for cleaning an aerosol constituted by fine particles (median diameter of 4.6 µm was measured. The collection efficiency was calculated for particle diameters between 0.4 and 8.5 µm. The results showed that the collection efficiency decreased with the increase of the temperature and increased

  20. Avaliação qualitativa do efeito de agentes de limpeza na camada de lama dentinária: estudo ultra-estrutural em microscopia eletrônica de varredura Smear layer removal: a qualitative scanning electron microscopy study

    Directory of Open Access Journals (Sweden)

    Maria Auxiliadora Junho de ARAÚJO

    1998-04-01

    Full Text Available Quando qualquer instrumento abrasiona ou corta a dentina, produz na superfície uma camada de lama dentinária ou "smear layer". Dependendo do agente de união indicado em Odontologia adesiva, há a necessidade ou não da remoção da camada de lama da superfície dentinária. Com a finalidade de verificar a ação de diferentes substâncias para a limpeza dentinária, utilizamos 20 dentes pré-molares superiores íntegros, mantidos em soro fisiológico, nos quais as coroas foram seccionadas ao meio no sentido mésio-distal. Com instrumento diamantado, removeu-se o esmalte da porção vestibular e da porção lingual da coroa e, com uma broca carbide cilíndrica lisa nº 56, cortou-se aproximadamente 1 mm de dentina com alta rotação sob abundante refrigeração ar/água, para produzir a camada de lama dentinária. Em seguida, essa superfície foi tratada com diferentes substâncias e lavada por 30 segundos com "spray" ar/água. No controle, foi simplesmente utilizado o "spray" ar/água. Os espécimes foram montados em suportes metálicos, preparados e visualizados no MEV-DSM 950 da Zeiss, em aumentos que variaram de 100 a 5.000 vezes. Os materiais que mais removeram a camada de lama foram, em ordem crescente: 1. "spray" ar/água; 2. fluoreto de sódio 2%; 3. associação alternada de Dakin/Tergensol; 4. água oxigenada 3%; 5. jateamento com óxido de alumínio 50 mm; 6. flúor acidulado 1,27%; 7. ácido poliacrílico 25%; 8. ácido fosfórico 10%.A smear layer is produced on the dentin surface after abrasion or cutting by instruments. Its removal is indicated or not according to the kind of bonding agent used in adhesive dentistry. The purpose of this study was to evaluate the possible effects of some substances on the smear layer. Twenty upper non-carious premolars, stored in isotonic saline solution, were mesiodistally hemi-sectioned and the buccal and lingual enamel was removed with high speed diamond bur. One millimeter of the dentinal

  1. Avaliação da camada de fibras nervosas na retinopatia diabética tratada por panfotocoagulação com laser de argônio Examination of the retinal nerve fiber layer in diabetic retinopathy treated by argon laser panphotocoagulation

    Directory of Open Access Journals (Sweden)

    Otacílio de Oliveira Maia Júnior

    2008-04-01

    Full Text Available OBJETIVO: Avaliar alterações na camada de fibras nervosas da retina na retinopatia diabética tratada por panfotocoagulação com laser de argônio. MÉTODOS: Estudo prospectivo de portadores de retinopatia diabética submetidos a panfotocoagulação retiniana. Inicialmente, foram realizados exame oftalmológico completo e tomografia de coerência óptica. Todos pacientes foram submetidos a panfotocoagulação em um dos olhos. A camada de fibras nervosas foi avaliada por meio da tomografia de coerência óptica na 1ª semana, no primeiro, terceiro e sexto meses do tratamento. RESULTADOS: A amostra foi composta por 27 pacientes (27 olhos portadores de diabetes mellitus tipo 2. A idade variou entre 41 e 64 anos (média de 53,7 ± 6,2 anos, sendo 10 (37% pacientes do sexo masculino e 17 (63% do feminino. Quanto ao tipo de retinopatia, 22,2% apresentavam RD proliferativa e 77,8%, RD não proliferativa muito grave. Houve aumento significante nas medidas da espessura da camada de fibras nervosas, permanecendo nos setores temporal, 3 e 4 horas após seis meses de seguimento. Não foi observada qualquer redução na espessura em todos parâmetros analisados. CONCLUSÃO: Não foi evidenciada, a curto e médio prazo, redução na espessura da camada de fibras nervosas em portadores de retinopatia diabética tratada por panfotocoagulação que possa ser identificável por meio da tomografia de coerência óptica. Por outro lado, alguns setores mostraram aumento na espessura durante o seguimento.PURPOSE: To evaluate the alterations in the retinal nerve fiber layer in diabetic retinopathy treated by argon laser panphotocoagulation. METHODS: Prospective study of patients with diabetic retinopathy submitted to retinal panphotocoagulation. Initially, complete ophthalmologic examination and optical coherence tomography were performed. All patients were submitted to panphotocoagulation with argon laser in one of the eyes. The retinal fiber layer was evaluated

  2. TECNIFICACIÓN, CARACTERIZACIÓN FISICOQUÍMICA Y MICROBIOLÓGICA DEL QUESO DE CAPA DE MOMPOX COLOMBIA TECNIFICAÇÃO, FÍSICO-QUÍMICAS E MICROBIOLÓGICAS CAMADA DE QUEIJO DA COLÔMBIA MOMPOX MANUFACTURING, PHYSICOCHEMICAL AND MICROBIOLOGICAL CHARACTERIZATION OF ARTISANAL LAYER CHEESE FROM MOMPOX COLOMBIA

    Directory of Open Access Journals (Sweden)

    CLEMENTE GRANADOS C

    2010-12-01

    Full Text Available El queso de capa es un queso de pasta filata producido artesanalmente en Colombia. Se describió el proceso de producción artesanal y de tecnificación, así como también se realizaron análisis fisicoquímicos y microbiológicos. Los resultados microbiológicos mostraron que la carga de hongos del queso artesanal está por encima de los valores recomendados por las normas colombianas. El queso de capa tecnificado presentó un mayores porcentaje de sólidos totales y rendimiento que el artesanal, además presenta mejor calidad y propiedades organolépticas.A camada de queijo é um queijo produzido por mão na filata Colômbia. Ele descreveu o processo da produção artesanal de produtos químicos e tecnológicos, bem como condução e análisis microbiológica. Os resultados microbiológicos mostraram que a carga fúngica de queijo artesanal está ácima dos valores recomendados pelas normas da Colômbia. A camada de queijo-tecnificado apresentaram maior percentual de sólidos totais e retorno da nave também tem melhor qualidade e propriedades organolépticas.Layer Cheese is an artisanal-made typical Colombian "pasta filata" variety of cheese. This article describes the process of craft production and manufacturing. It was performed physicochemical and microbiological analysis. Results shown that the fungal load ofartisanal cheese is above the valúes recommended by Colombian standards. Manufacturated Layer cheese presented a higher percentage of total solids and the yield of artisanal cheese has better quality and organoleptic properties.

  3. Correlação e correspondência topográfica entre espessura da camada de fibras nervosas da retina e campo visual no glaucoma primário de ângulo aberto Correlation and topographic match between nerve fiber layer thickness and visual field in primary open angle glaucoma

    Directory of Open Access Journals (Sweden)

    Paula Boturão de Almeida

    2001-04-01

    Full Text Available Objetivo: Verificar a correlação e a correspondência topográfica entre a espessura da camada de fibras nervosas da retina, medidas pelo polarímetro de varredura a laser GDxTM Scanning Laser System® e o campo visual, medido pelo perímetro automatizado Humphrey® ("white-white" em portadores de glaucoma primário de ângulo aberto. Métodos: Foram investigadas as seguintes correlações: 1- Correlação entre a média da sensibilidade dos quadrantes e do ponto de fixação do campo visual, em decibéis, e a média da espessura da camada de fibras nervosas da retina correspondente, em micra, sem classificação dos olhos dos pacientes quanto ao estadio do comprometimento perimétrico. 2- A mesma correlação anterior, porém, com os olhos dos pacientes distribuídos em classes quanto à alteração perimétrica. 3- Correlação entre os índices globais do campo visual e os índices numéricos do analisador de espessura da camada de fibras nervosas da retina. 4- Correlação entre a média dos valores do gráfico "total deviation" do campo visual e o desvio da normalidade da camada de fibras nervosas da região correspondente. 5- Investigou-se a freqüência de correspondência topográfica entre os defeitos perimétricos e as alterações da camada de fibras nervosas da retina. Utilizou-se o coeficiente de correlação de Spearman, sendo o nível de rejeição para a hipótese de nulidade fixado num valor menor ou igual a 0,05 (5%. Resultados: Observou-se as seguintes correlações estatisticamentes significantes, mas de forma muito pouco intensa: 1- GDX total e Campo visual total; GDX superior e Campo visual nasal inferior; GDX inferior e Campo visual nasal superior; GDX nasal e Campo visual temporal; GDX superior e Campo visual inferior; GDX inferior e Campo visual superior. 2- GDX inferior e Campo visual nasal (medial superior dos pacientes classificados como graves. 3- Nos olhos classificados como normais: PSD e EM; CPSD e SI.Nos olhos

  4. Relationship of black layer and milk line development on maize seed maturity Relação entre o desenvolvimento da camada negra e da linha de transformação em amido e a maturidade de sementes de milho

    Directory of Open Access Journals (Sweden)

    R.D. Vieira

    1995-04-01

    Full Text Available The relationship of black layer and milk line development on maize seed maturity was evaluated under tropical conditions. Seed moisture (g.kg-1, standard germination - SG (7 days, 25°C, and vigor, using accelerated aging-AA (96 hours, 42°C and 100% of RH, cold test-CT only in 1991/92 (7 days at 10°C and 7 days at 25°C and electrical conductivity-EC (four 50-seed samples, 24 hours imbibition at 25°C and milk line and black layer formation (using a five-stage rating system were determined at 3 to 4 days intervals, using two genotypes (hybrid CX 133 and variety IAC 100 during the crop seasons of 1990/91 and 1991/92. The results showed that physiological maturity was reached before stage 4, based on seed germination and vigor (AA and CT values, which occurred before that stage and presented the lowest values of EC. On the other hand, moisture content levels of 300 to 350 g.kg-1 were reached only at stage 4. The milk line ratings proved useful in predicting physiological maturity as well as the harvest maturity.A relação entre o desenvolvimento da camada negra e da linha de transformação em amido e a maturidade fisiológica de sementes de milho foi estudada durante dois anos agrícolas (1990/91 e 1991/92. Para atingir os objetivos do trabalho, avaliou-se o grau de umidade, a germinação, o vigor (envelhecimento acelerado, teste frio e condutividade elétrica e o desenvolvimento da camada negra e da linha de transformação em amido para dois genótipos (CX 133 e IAC 100. Com base nos resultados de germinação e vigor das sementes verificou-se que a maturidade fisiológica foi alcançada antes do estádio 4. Por outro lado, graus de umidade de 30 a 35% foram alcançados somente no estádio de desenvolvimento 4. A linha de transformação em amido provou ser um instrumento útil para predizer a maturidade fisiológica e de colheita para sementes de milho.

  5. Dureza e resistência ao desgaste da camada de ZrN formada por nitretação a plasma sobre zircônia parcialmente estabilizada com ítria Hardness and wear resistance of the ZrN layer made by plasma nitriding of yttria partially-stabilized zirconia

    Directory of Open Access Journals (Sweden)

    R. Milani

    2010-07-01

    Full Text Available Corpos-de-prova de zircônia parcialmente estabilizada com ítria foram moldados por prensagem uniaxial, sinterizados e nitretados em plasma de micro-ondas à pressão atmosférica. A camada de ZrN sobre zircônia formou-se a uma taxa de 4 µm.min-1, podendo atingir uma espessura de 500 µm. As amostras foram caracterizadas por meio de medidas de dureza e resistência ao desgaste. A superfície nitretada apresentou dureza superior e resistência ao desgaste similar ao substrato de zircônia.Samples of yttria partially-stabilized zirconia were molded by uniaxial pressing, sintered and nitrided in an atmospheric pressure microwave plasma. This procedure leads to the formation of a ZrN layer whose growth rate and thickness reached 4 µm.min-1 and 500 µm, respectively. The samples were characterized by means of hardness and wear resistance tests. The nitrided surface exhibits superior hardness and wear resistance similar to that of the zirconia substrate.

  6. Dos imaginários sobre a iniciação sexual: intersecções de gênero, raça/cor e sexualidade entre jovens de camadas populares em Belém, Pará

    Directory of Open Access Journals (Sweden)

    Ramon Reis

    Full Text Available Resumo Este texto propõe uma exposição sobre o “roteiro sexual” de mulheres e homens jovens (heterossexuais e homossexuais residentes em regiões “centrais” e “periféricas” da capital paraense, tendo como base material oriundo do projeto “‘Para entrar no mundo que não é meu’: a iniciação sexual a partir de entrevistas com as(os jovens pobres e de camadas médias de Belém do Pará”. Neste sentido, concentramos nossas incursões na Casa do Estudante Universitário do Pará (CEUP, localizada no bairro de classe média/média alta Batista Campos, e no bairro Guamá - “periferia” de Belém. Enfatizamos, assim, o importante papel das famílias de origem na reprodução de práticas de conduta social e sexual, além das distintas maneiras de as(os entrevistadas(os agenciarem suas iniciações sexuais a partir de convenções e imaginários acionados na interseção com gênero, sexualidade e raça/cor.

  7. Digestibilidade pré-cecal diurna e noturna em equinos fistulados alimentados com diferentes concentrados

    Directory of Open Access Journals (Sweden)

    Alexandre Augusto de Oliveira Gobesso

    2009-12-01

    Full Text Available O objetivo deste trabalho foi determinar as possíveis diferenças entre períodos diurno e noturno dos coeficientes de digestibilidade parcial pré-cecal da matéria seca, matéria orgânica, amido, proteína bruta, fibra em detergente ácido e fibra em detergente neutro de diferentes dietas formuladas com concentrados energéticos à base de milho, aveia, sorgo e milho/aveia 50/50%. Foram utilizados quatro cavalos íleo-fistulados com 36±4 meses de idade, mestiços, machos, castrados, com peso médio de 308±32kg. O delineamento experimental foi um quadrado latino 4X4 (quatro tratamentos, quatro períodos. Houve diferenças entre os períodos diurno e noturno nas frações da matéria seca, matéria orgânica, amido, fibra em detergente ácido e fibra em detergente neutro no tratamento a base de milho, nas frações fibra em detergente acido e fibra em detergente neutro no tratamento com aveia, e na fibra em detergente ácido dos tratamentos com sorgo e milho/aveia 50/50%.

  8. Análise de Fourier para detecção de defeitos localizados na camada de fibras nervosas da retina com a polarimetria a laser Fourier analysis for the detection of localized nerve fiber layer defects using scanning laser polarimetry

    Directory of Open Access Journals (Sweden)

    Felipe Andrade Medeiros

    2003-12-01

    Full Text Available OBJETIVO: Avaliar a utilidade da análise de Fourier como método para detecção de defeitos localizados na camada de fibras nervosas da retina (CFN, utilizando as medidas obtidas com a polarimetria de varredura a laser. MÉTODOS: O estudo incluiu 40 olhos de 40 pacientes com glaucoma apresentando defeitos localizados na CFN detectados à oftalmoscopia e/ou em fotografias da camada de fibras nervosas. O grupo controle foi constituído por 43 olhos de 43 pacientes normais, sem antecedente de pressão intra-ocular elevada ou glaucoma, e com exame normal da CFN e disco óptico. Todos os pacientes foram submetidos a exame da CFN utilizando o aparelho GDx® - Nerve Fiber Analyzer. Para comparação entre os grupos, foram utilizados os parâmetros fornecidos pelo software do aparelho e medidas provenientes dos coeficientes obtidos pela análise de Fourier da curva de distribuição dos valores de espessura da CFN. As várias medidas dos coeficientes de Fourier foram combinadas numa função linear discriminante de maneira a encontrar a combinação que resultasse na melhor separação entre pacientes glaucomatosos com defeitos localizados e os sujeitos normais. Curvas ROC foram construídas para cada medida e valores de sensibilidade para especificidades fixas foram calculados. RESULTADOS: Os parâmetros fornecidos pelo software do GDx mostraram baixo poder de diferenciação entre os pacientes normais e com defeitos localizados na CFN, com sensibilidades variando de 15 a 48% (com especificidade a 91%. Para a mesma especificidade de 91%, a combinação dos coeficientes de Fourier teve sensibilidade de 80%. A área sob a curva ROC para a combinação dos coeficientes de Fourier (0,90 foi significativamente superior à obtida para o parâmetro The Number (0,76. CONCLUSÃO: A análise de Fourier resultou em melhora na capacidade do GDx de detectar defeitos localizados na CFN em relação aos parâmetros fornecidos pelo software do aparelho.PURPOSE: In

  9. Partnerships – Limited partnerships and limited liability limited partnerships

    OpenAIRE

    Henning, Johan J.

    2000-01-01

    Consideration of the Limited Liability Partnership Act 2000 which introduced a new corporate entity, carrying the designations “partnership” and “limited” which allow members to limit their liability whilst organising themselves internally as a partnership. Article by Professor Johan Henning (Director of the Centre for Corporate Law and Practice, IALS and Dean of the Faculty of Law, University of the Free State, South Africa). Published in Amicus Curiae - Journal of the Institute of Advanced ...

  10. HOME Income Limits

    Data.gov (United States)

    Department of Housing and Urban Development — HOME Income Limits are calculated using the same methodology that HUD uses for calculating the income limits for the Section 8 program. These limits are based on HUD...

  11. Limits on fundamental limits to computation.

    Science.gov (United States)

    Markov, Igor L

    2014-08-14

    An indispensable part of our personal and working lives, computing has also become essential to industries and governments. Steady improvements in computer hardware have been supported by periodic doubling of transistor densities in integrated circuits over the past fifty years. Such Moore scaling now requires ever-increasing efforts, stimulating research in alternative hardware and stirring controversy. To help evaluate emerging technologies and increase our understanding of integrated-circuit scaling, here I review fundamental limits to computation in the areas of manufacturing, energy, physical space, design and verification effort, and algorithms. To outline what is achievable in principle and in practice, I recapitulate how some limits were circumvented, and compare loose and tight limits. Engineering difficulties encountered by emerging technologies may indicate yet unknown limits.

  12. PAIS DE CAMADA MÉDIA E POPULAR

    Directory of Open Access Journals (Sweden)

    Vanessa Delfino

    2005-01-01

    Full Text Available Los objetivos de esta pesquisa consistió en analizar las concepciones de padres, de diferentes estatus sociales, sobre la violencia domestica contra los ninõs, los tipos de agresiones que relatan, la definición que dan para estos comportamientos y el nivel de detección de la violencia en su medio. Para cumplir tales objetivos fue elaborado un itinerário através de uma entrevista estruturada que tomo por base un trabajo de investigación sobre las prácticas de la educación de los hijos, siendo esta compuesta de 15 preguntas. Participaran 48 padres de família, 24 del clase media y 24 del estrato social popular. Los resultados indican que tanto los padres del nível social medio cuanto del popular tienen conocimiento de la violência domestica contra los ninõs, pero al mismo tiempo, existe una diferencia en la forma de uno y de outro de percibir la violencia. Estos datos indican la necesidad de más investigaciones sobre el tema.

  13. Arranjos familiares de crianças das camadas populares

    Directory of Open Access Journals (Sweden)

    Amazonas Maria Cristina Lopes de Almeida

    2003-01-01

    Full Text Available Esta pesquisa estudou o funcionamento e os arranjos familiares de crianças de uma escola pública da cidade do Recife. A amostra se constituiu de 100 pessoas, sendo 50 adultos (pais ou responsáveis pelas crianças e 50 crianças de 06 a 11 anos. Foram utilizados como instrumento a Entrevista do Genograma e o Desenho da Família com Estória. Os resultados mostram vários tipos de arranjos familiares entre estas crianças, predominando a família nuclear. Quanto ao funcionamento, a maioria dessas famílias se organiza em torno de mulheres, sendo as figuras masculinas fragilizadas pelo desemprego, uso de álcool ou outras drogas.

  14. Intervalo hídrico ótimo em um latossolo vermelho distroférrico sob diferentes sistemas de produção Least limiting water range in a distroferric red latossol under different growing systems

    Directory of Open Access Journals (Sweden)

    Milson E. Serafim

    2008-12-01

    Full Text Available Este trabalho teve o objetivo de caracterizar sistemas de cultivo quanto à qualidade estrutural do solo para o desenvolvimento de plantas por meio da determinação do Intervalo Hídrico Ótimo (IHO. O estudo foi realizado com amostras indeformadas de um Latossolo Vermelho distroférrico, sob os sistemas de cultivo convencional, direto e integração lavoura-pecuária, no município de Dourados - MS. Em cada sistema de cultivo, foram amostrados 28 pontos, nas camadas de 0-0,05 m, 0,05-0,10 m, e 0,10-0,20 m, totalizando 84 amostras por sistema, que foram utilizadas para a determinação da curva de retenção de água no solo, da curva de resistência do solo à penetração e da porosidade. No sistema de cultivo convencional e no direto, a menor limitação ao desenvolvimento radicular foi na camada de 0-0,05 m, e na integração, a limitação foi menor na camada de 0,10-0,20 m. Na camada de 0-0,05 m do convencional, o IHO foi igual à capacidade de água disponível. Nos sistemas direto e integração, a resistência à penetração foi limitante. A resistência à penetração foi o principal fator limitante do IHO na maioria das situações estudadas.The objective of this work was to characterize the growing systems related to the structural soil quality for plants development by the Least Limiting Water Range (LLWR. The study was developed using soil samples with preserved structure of a Distroferric Red Latossol under the conventional, no tillage and integrated growing systems in de county of Dourados-MS, Brazil. In each system 28 points were sampled, in 0-0.05, 0.05-0.10 and 0.10-0.20 m deep layers, ending up with 84 samples by system which was used to adjust the water retention curve in the soil, soil resistance to penetration curve and porosity determination, all of them necessary to the LLWR determination. In the conventional and no-tillage systems the smallest restriction to de roots development was in the 0-0.05 m layer, while in

  15. O desencontro entre desejo e realidade: a "indústria" da cesariana entre mulheres de camadas médias no Rio de Janeiro, Brasil Disagreement between desire and reality: cesarean "industry" among middle class women in Rio de Janeiro, Brazil

    Directory of Open Access Journals (Sweden)

    Junia Espinha Cardoso

    2012-01-01

    Full Text Available O artigo apresenta resultados de uma pesquisa qualitativa que buscou apreender e compreender, através da percepção e experiência de mulheres de camadas médias, o desencontro entre o desejo pelo parto vaginal e o desfecho em cesariana. Quinze usuárias de planos privados de saúde foram entrevistadas sobre suas experiências e percepções relativas ao pré-natal e parto. Os resultados evidenciaram uma (sutil ou explícita interferência do obstetra sobre a escolha das mulheres, influenciando o desfecho em cesariana e sugerindo que, para muitas mulheres, não está sendo possível escapar das "armadilhas" de um modelo biomédico mercantilizado, interventor e iatrogênico, institucionalizado e legitimado pela sociedade. A pesquisa pretende contribuir para ações que estimulem o exercício da cidadania feminina nos processos decisórios que envolvem as questões da saúde reprodutiva, preservando e garantindo a experiência do parto como um direito inalienável das mulheres, seus companheiros e familiares.This paper presents results of a qualitative research that aimed to apprehend and understand, among middle class women´s perception and experience, the disagreement / distance / gap between primary vaginal labor option and a cesarean outcome. Fifteen women who had a private health insurance plan were interviewed about their experiences and perceptions related to their prenatal care and parturition process. Results showed a pervasive or explicit intervention of the obstetrician on women's choice, influencing on the cesarean outcome and suggesting that, for many women, it is still difficult to escape from the "trap" of the mercantilist, intervening and "iatrogenic" biomedical model, which is still firmly institutionalized and legitimated in our society. These results intend to collaborate with actions aimed to promote women's citizenship related to the right to make decisions on their reproductive choices, preserving and undertaking the

  16. Participação paterna no cuidado de crianças pequenas: um estudo etnográfico com famílias de camadas populares Paternal involvement in the care of small children: an ethnographic study of low-income families

    Directory of Open Access Journals (Sweden)

    Vânia Bustamante

    2005-12-01

    Full Text Available O presente estudo focaliza a participação paterna no cuidado da saúde de crianças menores de seis anos em famílias de camadas populares. Trata-se de um estudo de cunho etnográfico desenvolvido mediante observação participante e entrevistas. Visitamos famílias de um bairro de periferia de uma capital nordestina, durante um período de nove meses, e encontramos que ter filhos constitui uma dimensão fundamental na vida de homens e mulheres, constituindo causa comum da formação de novos núcleos familiares. A participação paterna é sintetizada em três dimensões: a educação, em que o pai é fundamental; os cuidados corporais, entendidos como atribuição feminina; e a preservação da integridade, considerada dever de todos os membros da família. Embora persista a identificação com papéis de gênero tradicionais, ao contrastarmos discursos com práticas, percebemos que em todas as famílias, e mais intensamente nas nucleares, existem dimensões nas que os homens participam ativamente, evidenciando proximidade física e emocional com os filhos.The present study focused on father's involvement in the health care of small children (under six years in low-income families. An ethnographic study was performed with interviews and participatory observation. We visited families in an outlying low-income urban neighborhood in Northeast Brazil, for nine months. Children appeared as a fundamental dimension in the lives of men and women, constituting a common reason for forming a family nucleus. The paternal role involved three key dimensions: education, in which the father was essential; body care, usually considered a female attribution; and preservation of integrity, considered an obligation for all family members. Despite the fact that traditional identification of gender roles still persists, based on contrasting discourses and practices, in all families (and especially in nuclear ones there were dimensions in which men participated

  17. Desenvolvimento e aplicação de metodologia por cromatografia em camada delgada para determinação do perfil de alcalóides oxindólicos pentacíclicos nas espécies sul-americanas do gênero Uncaria

    Directory of Open Access Journals (Sweden)

    Ligia M.M. Valente

    Full Text Available O gênero Uncaria (Rubiaceae é representado na América do Sul e Central por duas espécies: U. tomentosa (Willd. DC. e U. guianensis (Aubl. Gmel., conhecidas popularmente como unha-de-gato. Ambas são trepadeiras perenes, sendo empregadas na prevenção e cura de várias doenças. Nessas plantas são encontrados alcalóides oxindólicos e indólicos, triterpenos glicosilados, taninos e flavonóides. Seis alcalóides oxindólicos pentacíclicos, considerados seus marcadores: especiofilina, mitrafilina, uncarina F, isomitrafilina, pteropodina e isopteropodina, são usados na padronização do material vegetal e fitoterápicos derivados. O presente trabalho descreve o desenvolvimento de metodologia analítica qualitativa utilizando cromatografia em camada delgada (CCD para determinação do perfil dos seis alcalóides oxindólicos pentacíclicos marcadores das espécies. O desenvolvimento do método incluiu a comparação entre o uso do extrato metanólico bruto, e de frações enriquecidas obtidas por partição ácido-base clássica ou pelo uso de resina básica Poliamida 6. Utilizou-se gel de sílica como fase estacionária, e variaram-se alguns parâmetros como: eluentes, concentração da amostra, espaço de eluição e tipos de reveladores. O método desenvolvido em CCD mostrou-se confiável, reprodutível e seletivo para os alcalóides alvos, sendo aplicado na análise de amostras de folhas e caule das duas espécies e também de fitoterápicos comerciais à base de U. tomentosa.

  18. Robust test limits

    NARCIS (Netherlands)

    Albers, Willem/Wim; Kallenberg, W.C.M.; Otten, G.D.

    1997-01-01

    Because of inaccuracies of the measurement process inspection of manufactured parts requires test limits which are more strict than the given specification limits. Test limits derived under the assumption of normality for product characteristics turn out to violate the prescribed bound on the

  19. LANSCE beam current limiter

    International Nuclear Information System (INIS)

    Gallegos, F.R.

    1996-01-01

    The Radiation Security System (RSS) at the Los Alamos Neutron Science Center (LANSCE) provides personnel protection from prompt radiation due to accelerated beam. Active instrumentation, such as the Beam Current Limiter, is a component of the RSS. The current limiter is designed to limit the average current in a beam line below a specific level, thus minimizing the maximum current available for a beam spill accident. The beam current limiter is a self-contained, electrically isolated toroidal beam transformer which continuously monitors beam current. It is designed as fail-safe instrumentation. The design philosophy, hardware design, operation, and limitations of the device are described

  20. 7 CFR 1400.204 - Limited partnerships, limited liability partnerships, limited liability companies, corporations...

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Limited partnerships, limited liability partnerships..., limited liability partnerships, limited liability companies, corporations, and other similar legal entities. (a) A limited partnership, limited liability partnership, limited liability company, corporation...

  1. JET pump limiter

    International Nuclear Information System (INIS)

    Sonnenberg, K.; Deksnis, E.; Shaw, R.; Reiter, D.

    1988-01-01

    JET plans to install two pump limiter modules which can be used for belt-limiter, inner-wall and X-point discharges and, also, for 1-2s as the main limiter. A design is presented which is compatible with two diagnostic systems, and which allows partial removal of the pump limiter to provide access for remote-handling operations. The high heat-flux components are initially cooled during a pulse. Heat is removed between discharges by radiation and pressure contacts to a water-cooled support structure. The pumping edge will be made of annealed pyrolytic graphite. Exhaust efficiency has been estimated, for a 1-d edge model, using a Monte-Carlo calculation of neutral gas transport. When the pump limiter is operated together with other wall components we expect an efficiency of ≅ 5% (2.5 x 10 21 part/s). As a main limiter the efficiency increases to about 10%. (author)

  2. Reactor limit control system

    International Nuclear Information System (INIS)

    Rubbel, F.E.

    1982-01-01

    The very extensive use of limitations in the operational field between protection system and closed-loop controls is an important feature of German understanding of operational safety. The design of limitations is based on very large activities in the computational field but mostly on the high level of the plant-wide own commissioning experience of a turnkey contractor. Limitations combine intelligence features of closed-loop controls with the high availability of protection systems. (orig.)

  3. Detector limitations, STAR

    Energy Technology Data Exchange (ETDEWEB)

    Underwood, D. G.

    1998-07-13

    Every detector has limitations in terms of solid angle, particular technologies chosen, cracks due to mechanical structure, etc. If all of the presently planned parts of STAR [Solenoidal Tracker At RHIC] were in place, these factors would not seriously limit our ability to exploit the spin physics possible in RHIC. What is of greater concern at the moment is the construction schedule for components such as the Electromagnetic Calorimeters, and the limited funding for various levels of triggers.

  4. Performance limitations at ISABELLE

    International Nuclear Information System (INIS)

    Keil, E.

    1975-01-01

    The transverse stability of coasting beams in the planned ISABELLE storage rings was studied. The beam--beam tune shift limitation at 0.005 can be avoided, and a computer simulation seems to show 0.005 is a pessimistic limit. For beams of reasonable smoothness on the edge, the actual limit should be somewhat higher. Some coupling effects due to the beam--beam interaction are also examined

  5. Limit loads in nozzles

    International Nuclear Information System (INIS)

    Zouain, N.

    1983-01-01

    The static method for the evaluation of the limit loads of a perfectly elasto-plastic structure is presented. Using the static theorem of Limit Analysis and the Finite Element Method, a lower bound for the colapso load can be obtained through a linear programming problem. This formulation if then applied to symmetrically loaded shells of revolution and some numerical results of limit loads in nozzles are also presented. (Author) [pt

  6. Limit analysis via creep

    International Nuclear Information System (INIS)

    Taroco, E.; Feijoo, R.A.

    1981-07-01

    In this paper it is presented a variational method for the limit analysis of an ideal plastic solid. This method has been denominated as Modified Secundary Creep and enables to find the collapse loads through a minimization of a functional and a limit process. Given an ideal plastic material it is shown how to determinate the associated secundary creep constitutive equation. Finally, as an application, it is found the limit load in an pressurized von Mises rigid plastic sphere. (Author) [pt

  7. Influência da redução medicamentosa da pressão intra-ocular na medida da espessura da camada de fibras nervosas da retina de olhos hipertensos e glaucomatosos pela polarimetria de varredura a laser The influence of intraocular pressure reduction with medication on retinal nerve fiber layer thickness measurements obtained with scanning laser polarimetry in glaucomatous and hypertensive eyes

    Directory of Open Access Journals (Sweden)

    Rodrigo Rezende Gomes Avelino

    2006-10-01

    Full Text Available OBJETIVO: Avaliar o efeito da redução da pressão intra-ocular (PIO obtido com o uso de terapia medicamentosa na espessura da camada de fibras nervosas da retina medida pela polarimetria de varredura a laser (PVL em pacientes glaucomatosos ou hipertensos oculares. MÉTODOS: Trinta e sete olhos de 37 pacientes foram prospectivamente incluídos no estudo e avaliados com a PVL sem uso de medicação ocular hipotensora e num período entre 15 e 30 dias após a instituição de medicação ocular hipotensora, que resultou em redução da PIO de pelo menos 25%. Os parâmetros medidos pela PVL antes e após a redução da PIO foram comparados com o teste t de Student pareado. RESULTADOS: A PIO média dos 37 pacientes diminuiu significativamente de 26,57±4,23 mmHg para 16,54±2,92 mmHg (p0,05. CONCLUSÃO: A redução da PIO com o uso de medicação ocular hipotensora não altera a medida da espessura da camada de fibras nervosas da retina pela PVL em pacientes com glaucoma ou hipertensão ocular.PURPOSE: To evaluate changes in retinal nerve fiber layer thickness as measured by scanning laser polarimetry (SLP after the use of medication to reduce intraocular pressure (IOP in glaucomatous or ocular hypertensive patients. METHODS: The authors prospectively enrolled 37 eyes of 37 patients in whom IOP was reduced by more than 25% after the use of medication. The images were obtained before and 15 to 30 days after the introduction of medication. The SLP parameters measured before and after the use of medication were compared using paired Student's t Test. RESULTS: The mean IOP was significantly reduced from 26.57±4.23 mmHg to 16.54 ±2.92 mmHg after the use of medication (p0.05. CONCLUSION: The retinal nerve fiber layer thickness, as measured by SLP, is not affected by the reduction of IOP with medication in patients with glaucoma or ocular hypertension.

  8. Numerical Limit Analysis:

    DEFF Research Database (Denmark)

    Damkilde, Lars

    2007-01-01

    Limit State analysis has a long history and many prominent researchers have contributed. The theoretical foundation is based on the upper- and lower-bound theorems which give a very comprehensive and elegant formulation on complicated physical problems. In the pre-computer age Limit State analysis...... also enabled engineers to solve practical problems within reinforced concrete, steel structures and geotechnics....

  9. Advanced limiters for ISX

    International Nuclear Information System (INIS)

    Mioduszewski, P.K.; Edmonds, P.H.; Sheffield, J.

    1982-01-01

    Continuous removal of heat and particles becomes a vital necessity in future steady-state fusion devices. The pump limiter seems to be an attractive concept to combine these two tasks. On ISX, various schemes of pump limiters are being explored with the final goal to furnish the ISX--C device with a pump limiter to handle heat removal and particle control in steady state. The emphasis of the present paper is on pump limiters based on ballistic particle collection. If this concept turns out to be successful in supplying sufficient pumping efficiency, it may be possible to design pump limiters without a leading edge. Analytical calculations of the particle collection efficiency are given for various limiter configurations. Pumping efficiencies of approximately 4--10%, depending on the specific configuration, seem to be feasible and should be sufficient for steady-state operation. Initial experimental results on pump limiter studies in ISX--B confirm the calculated collection efficiencies. By measuring the ion saturation current to the limiter blade and the pressure buildup simultaneously, we found a correlation between the incident particle flux and the pressure rise that agrees well with a simple model

  10. Limits to Inclusion

    Science.gov (United States)

    Hansen, Janne Hedegaard

    2012-01-01

    In this article, I will argue that a theoretical identification of the limit to inclusion is needed in the conceptual identification of inclusion. On the one hand, inclusion is formulated as a vision that is, in principle, limitless. On the other hand, there seems to be an agreement that inclusion has a limit in the pedagogical practice. However,…

  11. Mitigating greenhouse: Limited time, limited options

    International Nuclear Information System (INIS)

    Moriarty, Patrick; Honnery, Damon

    2008-01-01

    Most human-caused climate change comes from fossil fuel combustion emissions. To avoid the risk of serious climate change, very recent research suggests that emission reductions will need to be both large and rapidly implemented. We argue that technical solutions-improving energy efficiency, use of renewable and nuclear energy, and carbon capture and sequestration-can only be of minor importance, mainly given the limited time available to take effective climate action. Only curbing energy use, perhaps through 'social efficiency' gains, particularly in the high-energy consumption countries, can provide the rapid emissions reductions needed. The social efficiency approach requires a basic rethinking in how we can satisfy our human needs with low environmental impacts. Large cuts in emissions could then occur rapidly, but only if resistance to such changes can be overcome. Particularly in transport, there are also serious potential conflicts between the technical and the social efficiency approaches, requiring a choice to be made

  12. Modeling Complex Time Limits

    Directory of Open Access Journals (Sweden)

    Oleg Svatos

    2013-01-01

    Full Text Available In this paper we analyze complexity of time limits we can find especially in regulated processes of public administration. First we review the most popular process modeling languages. There is defined an example scenario based on the current Czech legislature which is then captured in discussed process modeling languages. Analysis shows that the contemporary process modeling languages support capturing of the time limit only partially. This causes troubles to analysts and unnecessary complexity of the models. Upon unsatisfying results of the contemporary process modeling languages we analyze the complexity of the time limits in greater detail and outline lifecycles of a time limit using the multiple dynamic generalizations pattern. As an alternative to the popular process modeling languages there is presented PSD process modeling language, which supports the defined lifecycles of a time limit natively and therefore allows keeping the models simple and easy to understand.

  13. Moving toroidal limiter

    International Nuclear Information System (INIS)

    Ikuta, Kazunari; Miyahara, Akira.

    1983-06-01

    The concept of the limiter-divertor proposed by Mirnov is extended to a toroidal limiter-divertor (which we call moving toroidal limiter) using the stream of ferromagnetic balls coated with a low Z materials such as plastics, graphite and ceramics. An important advantage of the use of the ferromagnetic materials would be possible soft landing of the balls on a catcher, provided that the temperature of the balls is below Curie point. Moreover, moving toroidal limiter would work as a protector of the first wall not only against the vertical movement of plasma ring but also against the violent inward motion driven by major disruption because the orbit of the ball in the case of moving toroidal limiter distributes over the small major radius side of the toroidal plasma. (author)

  14. Estudo do método da extração da camada leucoplaquetária na produção de hemocomponentes: avaliação laboratorial A study of the Buffy-coat extraction method for blood component processing: laboratorial analysis

    Directory of Open Access Journals (Sweden)

    Mario I. Serinolli

    2004-01-01

    Full Text Available Dentre os métodos para a obtenção de hemocomponentes destaca-se o método do plasma rico em plaquetas (PRP e o método da extração da camada leucoplaquetária (ECLP. Este estudo tem por objetivo comparar os métodos do PRP e da ECLP na produção de hemocomponentes. Foram processadas 88 bolsas de sangue total (ST pelo método do PRP, 130 bolsas triplas pelo método da ECLP (ECLPT e 215 bolsas coletadas em bolsas quádruplas pelo método da ECLP (ECLPQ com o uso de extrator automático. Encontramos diferença estatisticamente significante na quantidade de Hb total /unidade entre ECLPT e ECLPQ (p=0,005 e entre ECLPT e PRP (p=0,007 no ST. Houve diferença estatisticamente entre ECLPT e ECLPQ (pThe most commonly used methods for blood component processing are the "plasma rich in platelets method" (PRP, and the Buffy-coat extraction method (BC.The purpose of this study was to compare these two methods in the processing of blood components. Eighty-eight whole blood units (WB were processed by the PRP method, 130 blood units were processed by the BC triple blood bag method (BCT and 215 blood units were collected in quadruple blood bags by the BC method (BCQ using an automatic extractor. A statistically significant difference was observed in the number in the total Hb per unit of WB between the BCT and BCQ methods (p=0.005 and between the BCT and PRP methods (p=0.007. There were also statistically significant differences between the BCT and BCQ methods (p<0.001 and between BCQ and PRP methods (p<0.001 in relation to leukocytes/mL. In the RBC concentrates, we found statistically significant differences between the PRP method and both the BCT and BCQ methods in respect to hematocrit levels, Hb recovery, total Hb, leukocytes, leukocyte depletion, platelets and platelet depletion (p<0.001 in all cases. We also found statistically significant differences between the PRP, BCT and BCQ methods for the volume, platelet recovery, and leukocyte depletion (p<0

  15. Efeito de cascas de café e de arroz dispostas nas camadas do solo sobre a germinação e o crescimento inicial do caruru-de-mancha Allelopathic effect of coffee and rice husks arranged in soil layers on the germination and initial growth of Amaranthus viridis

    Directory of Open Access Journals (Sweden)

    J.C.F. Santos

    2001-08-01

    Full Text Available Estudos dos efeitos dos resíduos de plantas pela utilização de coberturas mortas no controle das plantas daninhas têm apresentado dificuldade de determinar a diferenciação entre alelopatia e competição. Atualmente, muitas pesquisas têm se referido a critérios que propõem evidência à alelopatia. Este trabalho em casa de vegetação visou determinar os efeitos alelopáticos proporcionados pelas cascas de café e de arroz sobre o caruru-de-mancha, por meio das disposições desses resíduos nas camadas do solo. O delineamento experimental foi o de blocos casualizados, com os tratamentos em quatro repetições e organizados num esquema fatorial (3x3, sendo cascas de café e de arroz e vermiculita expandida como um fator e suas disposições, com resíduos depositados no topo, incorporados na superfície e incorporados no fundo, como segundo fator. Como testemunha foi usado um tratamento adicional sem cobertura. De modo geral, resíduos de cascas proporcionaram inibição da germinação e estímulo ao crescimento do caruru-de-mancha. A casca de arroz proporcionou menor índice de velocidade de emergência e germinação de sementes do que a casca de café. A casca de café depositada no topo proporcionou maior crescimento e maior peso da matéria seca do caruru-de-mancha, seguido pela mesma casca incorporada na superfície do solo.Studies of plant residue effects involving mulches to control weeds in perennial crops are difficult to carry out due to the need to differentiate between allelopathy and competition. Many researches, nowadays, refer to criteria proving allelopathy. This work was established under greenhouse conditions to determine the allelopathic effects of coffee and rice husks on Amaranthus viridis through their arrangements in soil layers. The experimental design was a randomized block with four replications, arranged in a 3 x 3 factorial scheme, with coffee and rice husks and expanded vermiculite being one factor and

  16. EVALUACIÓN DEL COEFICIENTE DE UNIFORMIDAD EN CUATRO EMISORES DE RIEGO USANDO FILTRACIÓN GRUESA DE FLUJO ASCENDENTE EN CAPAS AVALIAÇÃO DO COEFICIENTE DE UNIFORMIDADE EM QUATRO EMISSORES DE IRRIGAÇÃO USANDO FILTRAÇÃO GROSSA DE FLUXO ASCENDENTE EM CAMADAS EVALUATION OF THE UNIFORMITY COEFFICIENT IN FOUR IRRIGATION EMITTERS USING UPFLOW COARSE FILTRATION IN LAYERS

    Directory of Open Access Journals (Sweden)

    Julián Loboa

    2011-12-01

    Full Text Available Se emplearon tecnologías de filtración no convencionales basadas en el flujo ascendente del agua a través de filtros con capas de materiales de diferente granulometría para evaluar los coeficientes de uniformidad en cuatro módulos de riego de alta frecuencia, en la planta piloto de tratamiento de agua del instituto de investigación Cinara (Cali. Cada módulo utilizó emisores de riego diferente: microjet, autocompensados incorporados (Aqua-Traxx, Lyn y cinta de riego (Queen Gil. Los resultados mostraron que con este sistema de filtración los emisores de riego que alcanzaron los mejores coeficientes de uniformidad fueron: microjet (94,3% y Lyn (93,73%, en un periodo de 120 y 165 horas respectivamente. El sistema de riego que presentó un coeficiente de uniformidad más homogéneo durante la mayor duración de riego continuo (72 horas fue el correspondiente al módulo con los goteros Lyn que alcanzó valores de 91,5% (calificación buena, y el desempeño menos eficiente lo presentó la cinta de riego.Empregaram-se tecnologias de filtração não convencionais baseadas no fluxo ascendente da água através de filtros com camadas de materiais de diferente granulometria para avaliar os coeficientes de uniformidade em quatro módulos de irrigação de alta frequência, na planta piloto de tratamento de água do instituto de pesquisas Cinara (Cali. Cada módulo utilizou emissores de irrigação diferente: microjet, autocompensados incorporados (Aqua-Traxx, Lyn e fita de irrigação (Queen Gil. Os resultados mostraram que com este sistema de filtração os emissores de irrigação que atingiram os melhores coeficientes de uniformidade foram: microjet (94,3% e Lyn (93,73% em um periodo de 120 e 165 horas respetivamente. O sistema de irrigação que apresentou um coeficiente de uniformidade mais homogêneo durante a maior duração de irrigação continua (72 horas foi o correspondente ao modulo com os conta-gotas Lyn que atingiu valores de 91

  17. Social representations of low-income diabetic women according to the health-disease process Representaciones sociales de las mujeres diabéticas de clases populares en lo referente al proceso salud y enfermedad Representações sociais de mulheres diabéticas, de camadas populares, em relação ao processo saúde-doença

    Directory of Open Access Journals (Sweden)

    Denise Siqueira Péres

    2008-06-01

    . Comprender las representaciones de mujeres con diabetes contribuye a la prestación de servicios del cuidado al diabético.Este trabalho tem como objetivo identificar as representações sociais de mulheres diabéticas das camadas populares em relação ao processo saúde-doença. Trata-se de estudo descritivo e exploratório. Foram entrevistadas oito participantes, atendidas numa unidade básica de saúde do município de Ribeirão Preto, SP, em 2003. Os dados foram organizados mediante análise temática de conteúdo e analisados segundo a teoria das representações sociais. O diabetes está relacionado a sentimentos negativos como choque, revolta e tristeza, o plano alimentar aparece vinculado à perda do prazer e prejuízos à saúde. As mulheres diabéticas mostraram relação ambivalente com o uso da medicação, percebido como cansativo e como recurso que promove o bem-estar e melhoria da qualidade de vida. A representação negativa dos serviços de saúde parece interferir no comportamento de adesão ao tratamento medicamentoso. Compreender as representações de mulheres com diabetes contribui para a integralidade do cuidado ao diabético.

  18. Tokamak pump limiters

    International Nuclear Information System (INIS)

    Conn, R.W.

    1984-05-01

    Recent experiments with a scoop limiter without active internal pumping have been carried out in the PDX tokamak with up to 6MW of auxiliary neutral beam heating. Experiments have also been done with a rotating head pump limiter in the PLT tokamak in conjunction with RF plasma heating. Extensive experiments have been done in the ISX-B tokamak and first experiments have been completed with the ALT-I limiter in TEXTOR. The pump limiter modules in these latter two machines have internal getter pumping. Experiments in ISX-B are with ohmic and auxiliary neutral beam heating. The results in ISX-B and TEXTOR show that active density control and particle removal is achieved with pump limiters. In ISX-B, the boundary layer (or scape-off layer) plasma partially screens the core plasma from gas injection. In both ISX-B and TEXTOR, the pressure internal to the module scales linearly with plasma density but in ISX-B, with neutral beam injection, a nonlinear increase is observed at the highest densities studied. Plasma plugging is the suspected cause. Results from PDX suggest that a region may exist in which core plasma energy confinement improves using a pump limiter during neutral beam injection. Asymmetric radial profiles and an increased edge electron temperature are observed in discharges with improved confinement. The injection of small amounts of neon into ISX-B has more clearly shown an improved electron core energy confinement during neutral beam injection. While carried out with a regular limiter, this Z-mode of operation is ideal for use with pump limiters and should be a way to achieve energy confinement times similar to values for H-mode tokamak plasmas. The implication of all these results for the design of a reactor pump limiter is described

  19. Tokamak pump limiters

    International Nuclear Information System (INIS)

    Conn, R.W.; California Univ., Los Angeles

    1984-01-01

    Recent experiments with a scoop limiter without active internal pumping have been carried out in the PDX tokamak with up to 6 MW of auxiliary neutral beam heating. Experiments have also been performed with a rotating head pump limiter in the PLT tokamak in conjunction with RF plasma heating. Extensive experiments have been done in the ISX-B tokamak and first experiments have been completed with the ALT-I limiter in TEXTOR. The pump limiter modules in these latter two machines have internal getter pumping. Experiments in ISX-B are with ohmic and auxiliary neutral beam heating. The results in ISX-B and TEXTOR show that active density control and particle removal is achieved with pump limiters. In ISX-B, the boundary layer (or scrape-off layer) plasma partially screens the core plasma from gas injection. In both ISX-B and TEXTOR, the pressure internal to the module scales linearly with plasma density but in ISX-B, with neutral beam injection, a nonlinear increase is observed at the highest densities studied. Plasma plugging is the suspected cause. Results from PDX suggest that a regime may exist in which core plasma energy confinement improves using a pump limiter during neutral beam injection. Asymmetric radial profiles and an increased edge electron temperature are observed in discharges with improved confinement. The injection of small amounts of neon into ISX-B has more clearly shown an improved electron core energy confinement during neutral beam injection. While carried out with a regular limiter, this 'Z-mode' of operation is ideal for use with pump limiters and should be a way to achieve energy confinement times similar to values for H-mode tokamak plasmas. The implication of all these results for the design of a reactor pump limiter is described. (orig.)

  20. Novel limiter pump topologies

    International Nuclear Information System (INIS)

    Schultz, J.H.

    1981-01-01

    The use of limiter pumps as the principle plasma exhaust system of a magnetic confinement fusion device promises significant simplification, when compared to previously investigating divertor based systems. Further simplifications, such as the integration of the exhaust system with a radio frequency heating system and with the main reactor shield and structure are investigated below. The integrity of limiters in a reactor environment is threatened by many mechanisms, the most severe of which may be erosion by sputtering. Two novel topolgies are suggested which allow high erosion without limiter failure

  1. Novel limiter pump topologies

    International Nuclear Information System (INIS)

    Schultz, J.H.

    1981-01-01

    The use of limiter pumps as the principle plasma exhaust system of a magnetic confinement fusion device promises significant simplification, when compared to previously investigating divertor based systems. Further simplifications, such as the integration of the exhaust system with a radio frequency heating system and with the main reactor shield and structure are investigated below. The integrity of limiters in a reactor environment is threatened by many mechanisms, the most severe of which may be erosion by sputtering. Two novel topologies are suggested which allow high erosion without limiter failure

  2. HUD Program Income Limits

    Data.gov (United States)

    Department of Housing and Urban Development — Income limits used to determine the income eligibility of applicants for assistance under three programs authorized by the National Housing Act. These programs are...

  3. Limited Income and Resources

    Data.gov (United States)

    U.S. Department of Health & Human Services — Information for those with limited income and resources (those who may qualify for or already have the Low Income Subsidy to lower their prescription drug coverage...

  4. SIS - Annual Catch Limit

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Annual Catch Limit (ACL) dataset within the Species Information System (SIS) contains information and data related to management reference points and catch data.

  5. Limited Denial of Participation

    Data.gov (United States)

    Department of Housing and Urban Development — A Limited Denial of Participation (LDP) is an action taken by a HUD Field Office or the Deputy Assistant Secretary for Single Family (DASSF) or Multifamily (DASMF)...

  6. Towards Improved Optical Limiters

    National Research Council Canada - National Science Library

    Huffman, Peter

    2002-01-01

    .... The first approach was to synthesize and study soluble thallium phthalocyanines. Thallium, due to its proximity to lead and indium on the periodic table, should exhibit favorable optical limiting properties...

  7. ACA Federal Upper Limits

    Data.gov (United States)

    U.S. Department of Health & Human Services — Affordable Care Act Federal Upper Limits (FUL) based on the weighted average of the most recently reported monthly average manufacturer price (AMP) for...

  8. HOME Rent Limits

    Data.gov (United States)

    Department of Housing and Urban Development — In accordance with 24 CFR Part 92.252, HUD provides maximum HOME rent limits. The maximum HOME rents are the lesser of: The fair market rent for existing housing for...

  9. Limit lines for risk

    International Nuclear Information System (INIS)

    Cox, D.C.; Baybutt, P.

    1982-01-01

    Approaches to the regulation of risk from technological systems, such as nuclear power plants or chemical process plants, in which potential accidents may result in a broad range of adverse consequences must take into account several different aspects of risk. These include overall or average risk, accidents posing high relative risks, the rate at which accident probability decreases with increasing accident consequences, and the impact of high frequency, low consequence accidents. A hypothetical complementary cumulative distribution function (CCDF), with appropriately chosen parametric form, meets all these requirements. The Farmer limit line, by contrast, places limits on the risks due to individual accident sequences, and cannot adequately account for overall risk. This reduces its usefulness as a regulatory tool. In practice, the CCDF is used in the Canadian nuclear licensing process, while the Farmer limit line approach, supplemented by separate qualitative limits on overall risk, is employed in the United Kingdom

  10. Adjusting estimative prediction limits

    OpenAIRE

    Masao Ueki; Kaoru Fueda

    2007-01-01

    This note presents a direct adjustment of the estimative prediction limit to reduce the coverage error from a target value to third-order accuracy. The adjustment is asymptotically equivalent to those of Barndorff-Nielsen & Cox (1994, 1996) and Vidoni (1998). It has a simpler form with a plug-in estimator of the coverage probability of the estimative limit at the target value. Copyright 2007, Oxford University Press.

  11. Smoothness of limit functors

    Indian Academy of Sciences (India)

    Abstract. Let S be a scheme. Assume that we are given an action of the one dimen- sional split torus Gm,S on a smooth affine S-scheme X. We consider the limit (also called attractor) subfunctor Xλ consisting of points whose orbit under the given action. 'admits a limit at 0'. We show that Xλ is representable by a smooth ...

  12. Safety and design limits

    International Nuclear Information System (INIS)

    Shishkov, L. K.; Gorbaev, V. A.; Tsyganov, S. V.

    2007-01-01

    The paper touches upon the issues of NPP safety ensuring at the stage of fuel load design and operation by applying special limitations for a series of parameters, that is, design limits. Two following approaches are compared: the one used by west specialists for the PWR reactor and the Russian approach employed for the WWER reactor. The closeness of approaches is established, differences that are mainly peculiarities of terms are noted (Authors)

  13. Altruism and Reproductive Limitations

    Directory of Open Access Journals (Sweden)

    Carey J. Fitzgerald

    2009-04-01

    Full Text Available We examined how different types of reproductive limitations — functional (schizoid personality disorder and schizophrenia, physical (malnutrition, and sexual (bisexuality and homosexuality — influenced altruistic intentions toward hypothetical target individuals of differing degrees of relatedness (r = 0, .25, and .50. Participants were 312 undergraduate students who completed a questionnaire on altruism toward hypothetical friends, half-siblings, and siblings with these different types of reproductive limitations. Genetic relatedness and reproductive limitations did not influence altruistic decision-making when the cost of altruism was low but did as the cost of altruism increased, with participants being more likely to help a sibling over a half-sibling and a half-sibling over a friend. Participants also indicated they were more likely to help a healthy (control person over people with a reproductive limitation. Of the three types of reproductive limitations, functional limitations had the strongest effect on altruistic decision-making, indicating that people were less likely to help those who exhibit abnormal social behavior.

  14. Force Limit System

    Science.gov (United States)

    Pawlik, Ralph; Krause, David; Bremenour, Frank

    2011-01-01

    The Force Limit System (FLS) was developed to protect test specimens from inadvertent overload. The load limit value is fully adjustable by the operator and works independently of the test system control as a mechanical (non-electrical) device. When a test specimen is loaded via an electromechanical or hydraulic test system, a chance of an overload condition exists. An overload applied to a specimen could result in irreparable damage to the specimen and/or fixturing. The FLS restricts the maximum load that an actuator can apply to a test specimen. When testing limited-run test articles or using very expensive fixtures, the use of such a device is highly recommended. Test setups typically use electronic peak protection, which can be the source of overload due to malfunctioning components or the inability to react quickly enough to load spikes. The FLS works independently of the electronic overload protection.

  15. Theory of limit cycles

    CERN Document Server

    Ye, Yan-Qian; Lo, Chi Y

    1986-01-01

    Over the past two decades the theory of limit cycles, especially for quadratic differential systems, has progressed dramatically in China as well as in other countries. This monograph, updating the 1964 first edition, includes these recent developments, as revised by eight of the author's colleagues in their own areas of expertise. The first part of the book deals with limit cycles of general plane stationary systems, including their existence, nonexistence, stability, and uniqueness. The second section discusses the global topological structure of limit cycles and phase-portraits of quadratic systems. Finally, the last section collects important results that could not be included under the subject matter of the previous two sections or that have appeared in the literature very recently. The book as a whole serves as a reference for college seniors, graduate students, and researchers in mathematics and physics.

  16. Hadron collider luminosity limitations

    CERN Document Server

    Evans, Lyndon R

    1992-01-01

    The three colliders operated to date have taught us a great deal about the behaviour of both bunched and debunched beams in storage rings. The main luminosity limitations are now well enough understood that most of them can be stronglu attenuated or eliminated by approriate design precautions. Experience with the beam-beam interaction in both the SPS and the Tevatron allow us to predict the performance of the new generation of colliders with some degree of confidence. One of the main challenges that the accelerator physicist faces is the problem of the dynamic aperture limitations due to the lower field quality expected, imposed by economic and other constraints.

  17. SLC kicker magnet limitations

    International Nuclear Information System (INIS)

    Cassel, R.; Donaldson, A.; Mattison, T.; Bowden, G.; Weaver, J.; Bulos, F.; Fiander, D.

    1991-01-01

    The SLC Damping Ring kicker magnets requires a fast magnetic field rise time of 58 nsec, a peak field of 800 gauss, a pulse amplitude stability of 0.01%, and a reasonable operational lifetime. The original kicker magnets designed by SLAC and at Fermi were not able to fulfill the SLC kicker requirements. Extensive studies were conducted to determine the limitation in the magnets, response of the ferrite in kicker magnet, and the modifications needed to improve the kicker magnet performance. The paper details the SLAC and Fermi kicker magnets limitation of performance

  18. Activation analysis. Detection limits

    International Nuclear Information System (INIS)

    Revel, G.

    1999-01-01

    Numerical data and limits of detection related to the four irradiation modes, often used in activation analysis (reactor neutrons, 14 MeV neutrons, photon gamma and charged particles) are presented here. The technical presentation of the activation analysis is detailed in the paper P 2565 of Techniques de l'Ingenieur. (A.L.B.)

  19. Thermal background noise limitations

    Science.gov (United States)

    Gulkis, S.

    1982-01-01

    Modern detection systems are increasingly limited in sensitivity by the background thermal photons which enter the receiving system. Expressions for the fluctuations of detected thermal radiation are derived. Incoherent and heterodyne detection processes are considered. References to the subject of photon detection statistics are given.

  20. The Copyright Agency Limited.

    Science.gov (United States)

    Morgan, Caroline

    1993-01-01

    The evolution and functions of Australia's Copyright Agency Limited are described. The agency is a copyright collecting organization which collectively administers the rights of authors and publishers whose works are copied in education, and enters into blanket agreements with educational authorities outside the existing statutory license. Some…

  1. Occupational dose equivalent limits

    International Nuclear Information System (INIS)

    Goldfinch, E.P.

    1980-01-01

    This paper considers methods of limiting individual radiation risks by recognizing the variation of risk with age at exposure, taking into account both somatic and genetic risks and proposes a simple formula for controlling individual cumulative exposure and hence risk. (Author)

  2. The Limits of Accountability.

    Science.gov (United States)

    Bailey, Stephen K.

    This discussion, presented at the Regent's Trustees' Conference, February 1973, reviews the limits of accountability in higher education. Managerial efficiency is suggested to assist in eliminating educational and financial waste. This, however, is the secondary concept emphasized. The primary emphasis indicates the legitimacy of the claims that a…

  3. Limitations on blanket performance

    International Nuclear Information System (INIS)

    Malang, S.

    1999-01-01

    The limitations on the performance of breeding blankets in a fusion power plant are evaluated. The breeding blankets will be key components of a plant and their limitations with regard to power density, thermal efficiency and lifetime could determine to a large degree the attractiveness of a power plant. The performance of two rather well known blanket concepts under development in the frame of the European Blanket Programme is assessed and their limitations are compared with more advanced (and more speculative) concepts. An important issue is the question of which material (structure, breeder, multiplier, coatings) will limit the performance and what improvement would be possible with a 'better' structural material. This evaluation is based on the premise that the performance of the power plant will be limited by the blankets (including first wall) and not by other components, e.g. divertors, or the plasma itself. However, the justness of this premise remains to be seen. It is shown that the different blanket concepts cover a large range of allowable power densities and achievable thermal efficiencies, and it is concluded that there is a high incentive to go for better performance in spite of possibly higher blanket cost. However, such high performance blankets are usually based on materials and technologies not yet developed and there is a rather high risk that the development could fail. Therefore, it is explained that a part of the development effort should be devoted to concepts where the materials and technologies are more or less in hand in order to ensure that blankets for a DEMO reactor can be developed and tested in a given time frame. (orig.)

  4. Age Limit of Pediatrics.

    Science.gov (United States)

    Hardin, Amy Peykoff; Hackell, Jesse M

    2017-09-01

    Pediatrics is a multifaceted specialty that encompasses children's physical, psychosocial, developmental, and mental health. Pediatric care may begin periconceptionally and continues through gestation, infancy, childhood, adolescence, and young adulthood. Although adolescence and young adulthood are recognizable phases of life, an upper age limit is not easily demarcated and varies depending on the individual patient. The establishment of arbitrary age limits on pediatric care by health care providers should be discouraged. The decision to continue care with a pediatrician or pediatric medical or surgical subspecialist should be made solely by the patient (and family, when appropriate) and the physician and must take into account the physical and psychosocial needs of the patient and the abilities of the pediatric provider to meet these needs. Copyright © 2017 by the American Academy of Pediatrics.

  5. FTU pump limiter

    International Nuclear Information System (INIS)

    Alessandrini, C.; Ciotti, M.; Mattei, A. De; Maddaluno, G.; Mazzitelli, G.

    1989-01-01

    The control of the refuelling and recycling of the plasma is crucial in providing enhanced performances in tokamaks and steady-state operation in future reactors. In this paper, we report details of the design and analysis for the pump limiter to be incorporated into the FTU tokamak. The FTU, presently under commissioning, is a compact high field (B=8T), medium high density, circular cross section machine with small accesses. The dimensions of the equatorial port (width 8 cm) would reduce the length of the entrance throat to a few centimeters, which is unacceptable for efficient particle trapping. We have, therefore, designed a rotating blade of the pump limiter head that, in the working position, extends in the toroidal direction inside the vacuum chamber. (author) 8 refs., 4 figs

  6. Current limiter circuit system

    Science.gov (United States)

    Witcher, Joseph Brandon; Bredemann, Michael V.

    2017-09-05

    An apparatus comprising a steady state sensing circuit, a switching circuit, and a detection circuit. The steady state sensing circuit is connected to a first, a second and a third node. The first node is connected to a first device, the second node is connected to a second device, and the steady state sensing circuit causes a scaled current to flow at the third node. The scaled current is proportional to a voltage difference between the first and second node. The switching circuit limits an amount of current that flows between the first and second device. The detection circuit is connected to the third node and the switching circuit. The detection circuit monitors the scaled current at the third node and controls the switching circuit to limit the amount of the current that flows between the first and second device when the scaled current is greater than a desired level.

  7. Limits of Nuclear Stability

    CERN Document Server

    Nerlo-Pomorska, B; Kleban, M

    2003-01-01

    The modern version of the liquid-drop model (LSD) is compared with the macroscopic part of the binding energy evaluated within the Hartree-Fock- Bogoliubov procedure with the Gogny force and the relativistic mean field theory. The parameters of a liquid-drop like mass formula which approximate on the average the self-consistent results are compared with other models. The limits of nuclear stability predicted by these models are discussed.

  8. Are Limit Orders Rational?

    Czech Academy of Sciences Publication Activity Database

    Šmíd, Martin

    2007-01-01

    Roč. 14, č. 4 (2007), s. 32-38 ISSN 0572-3043 R&D Projects: GA ČR(CZ) GA402/06/1417; GA ČR GA402/04/1294; GA ČR GD402/03/H057 Institutional research plan: CEZ:AV0Z10750506 Keywords : market microstructure * limit order market * portfolio selection Subject RIV: AH - Economics

  9. INAA - application and limitation

    International Nuclear Information System (INIS)

    Heydorn, K.

    1990-01-01

    The uncertainties associated with performing Instrumental Neutron Activation Analysis (INAA) are discussed in relation to their category. The Comite International de Poids et Mesure (CIPM) distinguishes between uncertainties according to how their contribution to the overall uncertainty is evaluated. INAA is a potentially definitive method, if all sources of uncertainty can be accounted for. The limitation of the method is reached when uncertainties, which cannot be accounted for, assume significance, and the method cannot be brought in statistical control. (orig.)

  10. Density limits in Tokamaks

    International Nuclear Information System (INIS)

    Tendler, M.

    1984-06-01

    The energy loss from a tokamak plasma due to neutral hydrogen radiation and recycling is of great importance for the energy balance at the periphery. It is shown that the requirement for thermal equilibrium implies a constraint on the maximum attainable edge density. The relation to other density limits is discussed. The average plasma density is shown to be a strong function of the refuelling deposition profile. (author)

  11. Photovoltaic energy cost limit

    International Nuclear Information System (INIS)

    Coiante, D.

    1992-01-01

    Referring to a photovoltaic system for grid connected applications, a parametric expression of kWh cost is derived. The limit of kWh cost is carried out extrapolating the values of cost components to their lowest figure. The reliability of the forecast is checked by disaggregating kWh cost in direct and indirect costs and by discussing the possible cost reduction of each component

  12. Heat flux limiting sleeves

    Science.gov (United States)

    Harris, William G.

    1985-01-01

    A heat limiting tubular sleeve extending over only a portion of a tube having a generally uniform outside diameter, the sleeve being open on both ends, having one end thereof larger in diameter than the other end thereof and having a wall thickness which decreases in the same direction as the diameter of the sleeve decreases so that the heat transfer through the sleeve and tube is less adjacent the large diameter end of the sleeve than adjacent the other end thereof.

  13. Superconductive AC current limiter

    International Nuclear Information System (INIS)

    Bekhaled, M.

    1987-01-01

    This patent describes an AC current limiter for a power transport line including a power supply circuit and feeding a load circuit via an overload circuit-breaker member. The limiter comprises a transformer having a primary winding connected in series between the power supply circuit and the load circuit and at least one secondary winding of superconductor material contained in a cryogenic enclosure and short-circuited on itself. The leakage reactance of the transformer as seen from the primary winding is low, and the resistance of the at least one secondary winding when in the non-superconducting state and as seen from the primary is much greater than the nominal impedance of the transformer. The improvement whereby the at least one secondary winding of the transformer comprises an active winding in association with a set of auxiliary windings. The set of auxiliary windings is constituted by an even number of series-connected auxiliary windings wound in opposite directions, with the total number of turns in one direction being equal to the total number of turns in the opposite direction, and with the thermal capacity of the secondary winding as a whole being sufficiently high to limit the expansion thereof to a value which remains small during the time it takes the circuit-breaking member to operate

  14. Strategic arms limitation

    Science.gov (United States)

    Allen Greb, G.; Johnson, Gerald W.

    1983-10-01

    Following World War II, American scientists and politicians proposed in the Baruch plan a radical solution to the problem of nuclear weapons: to eliminate them forever under the auspices of an international nuclear development authority. The Soviets, who as yet did not possess the bomb, rejected this plan. Another approach suggested by Secretary of War Henry Stimson to negotiate directly with the Soviet Union was not accepted by the American leadership. These initial arms limitation failures both reflected and exacerbated the hostile political relationship of the superpowers in the 1950s and 1960s. Since 1969, the more modest focus of the Soviet-American arms control process has been on limiting the numbers and sizes of both defensive and offensive strategic systems. The format for this effort has been the Strategic Arms Limitatins Talks (Salt) and more recently the Strategic Arms Reduction Talks (START). Both sides came to these negotiations convinced that nuclear arsenals had grown so large that some for of mutual restraint was needed. Although the SALT/START process has been slow and ponderous, it has produced several concrete the agreements and collateral benefits. The 1972 ABM Treaty restricts the deployment of ballistic missile defense systems, the 1972 Interim Agreement places a quantitative freeze on each side's land based and sea based strategic launchers, and the as yet unratified 1979 SALT II Treaty sets numerical limits on all offensive strategic systems and sublimits on MIRVed systems. Collateral benefits include improved verification procedures, working definitions and counting rules, and permanent bureaucratic apparatus which enhance stability and increase the chances for achieving additional agreements.

  15. Beta limits for ETF

    International Nuclear Information System (INIS)

    Helton, F.J.; Miller, R.L.

    1982-01-01

    ETF (Engineering Test Facility) one-dimensional transport simulations indicate that a volume-average beta of 4% is required for ignition. It is therefore important that theoretical beta limits, determined by requiring equilibria to be stable to all ideal modes, exceed 4%. This paper documents an ideal MHD analysis wherein it is shown that, with appropriate plasma cross-sectional shape and current profile optimization, operation near 5% is possible. The critical beta value, however, depends on the functional form used for ff', which suggests that higher critical betas could be achieved by directly optimizing the safety factor profile. (author)

  16. Limitations of Boltzmann's principle

    International Nuclear Information System (INIS)

    Lavenda, B.H.

    1995-01-01

    The usual form of Boltzmann's principle assures that maximum entropy, or entropy reduction, occurs with maximum probability, implying a unimodal distribution. Boltzmann's principle cannot be applied to nonunimodal distributions, like the arcsine law, because the entropy may be concave only over a limited portion of the interval. The method of subordination shows that the arcsine distribution corresponds to a process with a single degree of freedom, thereby confirming the invalidation of Boltzmann's principle. The fractalization of time leads to a new distribution in which arcsine and Cauchy distributions can coexist simultaneously for nonintegral degrees of freedom between √2 and 2

  17. Fault current limiter

    Science.gov (United States)

    Darmann, Francis Anthony

    2013-10-08

    A fault current limiter (FCL) includes a series of high permeability posts for collectively define a core for the FCL. A DC coil, for the purposes of saturating a portion of the high permeability posts, surrounds the complete structure outside of an enclosure in the form of a vessel. The vessel contains a dielectric insulation medium. AC coils, for transporting AC current, are wound on insulating formers and electrically interconnected to each other in a manner such that the senses of the magnetic field produced by each AC coil in the corresponding high permeability core are opposing. There are insulation barriers between phases to improve dielectric withstand properties of the dielectric medium.

  18. Dose. Detriment. Limit assessment

    International Nuclear Information System (INIS)

    Breckow, J.

    2015-01-01

    One goal of radiation protection is the limitation of stochastic effects due to radiation exposure. The probability of occurrence of a radiation induced stochastic effect, however, is only one of several other parameters which determine the radiation detriment. Though the ICRP-concept of detriment is a quantitative definition, the kind of detriment weighting includes somewhat subjective elements. In this sense, the detriment-concept of ICRP represents already at the stage of effective dose a kind of assessment. Thus, by comparing radiation protection standards and concepts interconvertible or with those of environment or occupational protection one should be aware of the possibly different principles of detriment assessment.

  19. Marketing with limited budget

    OpenAIRE

    Smirnova, Daria

    2017-01-01

    The purpose of this research-based thesis was to get an idea how managers of two small resembling hotels of a specific region deal with marketing process with a limited budget. In addition, the aim of the thesis was to examine if hotel managers who were interviewed perceive marketing only in the way of ‘promotion’ rather than marketing research, marketing mix and marketing environment theories. It was also found out if hotel managers of those hotels consider marketing as a key to successful h...

  20. Limitation of Auditors' Liability

    DEFF Research Database (Denmark)

    Werlauff, Erik; Foged-Ladefoged, Lise Kolding

    2014-01-01

    The article examines the question of whether rules on the limitation of auditors’ liability within the perspective of EU law are needed, and if so, which rules can provide an appropriate balance between the potential injured party’s interests and those of the auditing sector, including with respect...... to the fact that the insurance premiums associated with an unlimited liability must of course make the auditor’s tasks more expensive. Relevant EU recommendations and a comparative glance at other EU countries’ proposed solutions to the problem are included....

  1. Limits to biofuels

    Directory of Open Access Journals (Sweden)

    Johansson S.

    2013-06-01

    Full Text Available Biofuel production is dependent upon agriculture and forestry systems, and the expectations of future biofuel potential are high. A study of the global food production and biofuel production from edible crops implies that biofuel produced from edible parts of crops lead to a global deficit of food. This is rather well known, which is why there is a strong urge to develop biofuel systems that make use of residues or products from forest to eliminate competition with food production. However, biofuel from agro-residues still depend upon the crop production system, and there are many parameters to deal with in order to investigate the sustainability of biofuel production. There is a theoretical limit to how much biofuel can be achieved globally from agro-residues and this amounts to approximately one third of todays’ use of fossil fuels in the transport sector. In reality this theoretical potential may be eliminated by the energy use in the biomass-conversion technologies and production systems, depending on what type of assessment method is used. By surveying existing studies on biofuel conversion the theoretical limit of biofuels from 2010 years’ agricultural production was found to be either non-existent due to energy consumption in the conversion process, or up to 2–6000TWh (biogas from residues and waste and ethanol from woody biomass in the more optimistic cases.

  2. Limits to biofuels

    Science.gov (United States)

    Johansson, S.

    2013-06-01

    Biofuel production is dependent upon agriculture and forestry systems, and the expectations of future biofuel potential are high. A study of the global food production and biofuel production from edible crops implies that biofuel produced from edible parts of crops lead to a global deficit of food. This is rather well known, which is why there is a strong urge to develop biofuel systems that make use of residues or products from forest to eliminate competition with food production. However, biofuel from agro-residues still depend upon the crop production system, and there are many parameters to deal with in order to investigate the sustainability of biofuel production. There is a theoretical limit to how much biofuel can be achieved globally from agro-residues and this amounts to approximately one third of todays' use of fossil fuels in the transport sector. In reality this theoretical potential may be eliminated by the energy use in the biomass-conversion technologies and production systems, depending on what type of assessment method is used. By surveying existing studies on biofuel conversion the theoretical limit of biofuels from 2010 years' agricultural production was found to be either non-existent due to energy consumption in the conversion process, or up to 2-6000TWh (biogas from residues and waste and ethanol from woody biomass) in the more optimistic cases.

  3. (Limiting the greenhouse effect)

    Energy Technology Data Exchange (ETDEWEB)

    Rayner, S.

    1991-01-07

    Traveler attended the Dahlem Research Conference organized by the Freien Universitat, Berlin. The subject of the conference was Limiting the Greenhouse Effect: Options for Controlling Atmospheric CO{sub 2} Accumulation. Like all Dahlem workshops, this was a meeting of scientific experts, although the disciplines represented were broader than usual, ranging across anthropology, economics, international relations, forestry, engineering, and atmospheric chemistry. Participation by scientists from developing countries was limited. The conference was divided into four multidisciplinary working groups. Traveler acted as moderator for Group 3 which examined the question What knowledge is required to tackle the principal social and institutional barriers to reducing CO{sub 2} emissions'' The working rapporteur was Jesse Ausubel of Rockefeller University. Other working groups examined the economic costs, benefits, and technical feasibility of options to reduce emissions per unit of energy service; the options for reducing energy use per unit of GNP; and the significant of linkage between strategies to reduce CO{sub 2} emissions and other goals. Draft reports of the working groups are appended. Overall, the conference identified a number of important research needs in all four areas. It may prove particularly important in bringing the social and institutional research needs relevant to climate change closer to the forefront of the scientific and policy communities than hitherto.

  4. Limitations of inclusive fitness.

    Science.gov (United States)

    Allen, Benjamin; Nowak, Martin A; Wilson, Edward O

    2013-12-10

    Until recently, inclusive fitness has been widely accepted as a general method to explain the evolution of social behavior. Affirming and expanding earlier criticism, we demonstrate that inclusive fitness is instead a limited concept, which exists only for a small subset of evolutionary processes. Inclusive fitness assumes that personal fitness is the sum of additive components caused by individual actions. This assumption does not hold for the majority of evolutionary processes or scenarios. To sidestep this limitation, inclusive fitness theorists have proposed a method using linear regression. On the basis of this method, it is claimed that inclusive fitness theory (i) predicts the direction of allele frequency changes, (ii) reveals the reasons for these changes, (iii) is as general as natural selection, and (iv) provides a universal design principle for evolution. In this paper we evaluate these claims, and show that all of them are unfounded. If the objective is to analyze whether mutations that modify social behavior are favored or opposed by natural selection, then no aspect of inclusive fitness theory is needed.

  5. The limitation and modification of flux-limited diffusion theory

    International Nuclear Information System (INIS)

    Liu Chengan; Huang Wenkai

    1986-01-01

    The limitation of various typical flux-limited diffusion theory and advantages of asymptotic diffusion theory with time absorption constant are analyzed and compared. The conclusions are as following: Though the flux-limited problem in neutron diffusion theory are theoretically solved by derived flux-limited diffusion equation, it's going too far to limit flux due to the inappropriate assumption in deriving flux-limited diffusion equation. The asymptotic diffusion theory with time absorption constant has eliminated the above-mentioned limitation, and it is more accurate than flux-limited diffusion theory in describing neutron transport problem

  6. Limits of Lubrication in

    DEFF Research Database (Denmark)

    Olsson, David Dam

    as delivered stainless steel surfaces implying microstructure changes in terms of larger ratio of closed lubricant pockets due to selective grain boundary etching. Strategic surfaces have also been created by macroscopic texturing using spherical indentations having a very small edge slope in order to promote...... by strategic surfaces in comparison to normal stainless steel surfaces implying a larger extent of bi-axial stretching. Numerical simulations have been applied in order to evaluate limits of lubrication in the simulative strip reduction based on predictions of critical parameters appearing in terms......-models corresponds well to experimental results in terms of lubricant film breakdown and subsequently pick-up development. Punching and blanking have been investigated regarding tribological conditions in case of using stainless steel workpiece materials. However, this has called for development of a new test method...

  7. Personal Freedom beyond Limits

    Directory of Open Access Journals (Sweden)

    Juan Fernando Sellés

    2013-07-01

    Full Text Available In this work we distinguish between freedom in the human manifestations (intelligence, will,actions and personal freedom in the personal intimacy. This second is beyond the freedom reached bythe classic and modern thought, since it takes root in the personnel act of being. Because of it, it is not possible to characterize this freedom like the classic description as ‘domain over the own acts’, becauseit is a description of ‘categorial’ order; neither like present day ‘autonomy’ or ‘independence’, becausethe existence of one person alone is impossible, since ‘person’ means relation, personal free openingto other persons, description of the ‘transcendental’ order and, therefore, to the margin of limits.

  8. [Does medicine limit enlightenment?].

    Science.gov (United States)

    Schipperges, H

    1977-01-01

    In the first, historical part the most important programs of "Medical Enlightenment", are pointed out, beginning with Leibniz, followed by the public health movement of the 18th century, up to the time of Immanuel Kant. Based on this historical background several concepts of a "Medical Culture" are analysed in detail, for instance the "Theorie einer Medizinal-Ordnung" by Johann Benjamin Ehrhard (1800), the "Medicinische Reform" by Rudolf Virchow (1848) and the programs of the "Gesellschaft Deutscher Naturforscher und Arzte" (about 1850-1890), the latter bearing both scientific and political character. Following the historical part, the question is raised whether "Enlightenment" is limited by medicine and whether medicine is able to provide a program for individual health education resulting in a more cultivated style of private life, and lastly how this might be realized.

  9. The Limits to Relevance

    Science.gov (United States)

    Averill, M.; Briggle, A.

    2006-12-01

    Science policy and knowledge production lately have taken a pragmatic turn. Funding agencies increasingly are requiring scientists to explain the relevance of their work to society. This stems in part from mounting critiques of the "linear model" of knowledge production in which scientists operating according to their own interests or disciplinary standards are presumed to automatically produce knowledge that is of relevance outside of their narrow communities. Many contend that funded scientific research should be linked more directly to societal goals, which implies a shift in the kind of research that will be funded. While both authors support the concept of useful science, we question the exact meaning of "relevance" and the wisdom of allowing it to control research agendas. We hope to contribute to the conversation by thinking more critically about the meaning and limits of the term "relevance" and the trade-offs implicit in a narrow utilitarian approach. The paper will consider which interests tend to be privileged by an emphasis on relevance and address issues such as whose goals ought to be pursued and why, and who gets to decide. We will consider how relevance, narrowly construed, may actually limit the ultimate utility of scientific research. The paper also will reflect on the worthiness of research goals themselves and their relationship to a broader view of what it means to be human and to live in society. Just as there is more to being human than the pragmatic demands of daily life, there is more at issue with knowledge production than finding the most efficient ways to satisfy consumer preferences or fix near-term policy problems. We will conclude by calling for a balanced approach to funding research that addresses society's most pressing needs but also supports innovative research with less immediately apparent application.

  10. Limit, breakthrough and prosperity

    International Nuclear Information System (INIS)

    Takahashi, Minoru

    1973-01-01

    It is pointed out that the flow toward serious crises is in progress with regard to energy and industrial problems. Technical and industrial preparation and countermeasure to the flow are proposed, and the existence of a certain new world attainable on the assumption that the countermeasure is successful is described. The relation between oil output and the increasing demand for energy is pointed out as a subject matter of the crisis. The contribution of oil energy to total energy, after the output turns to decreasing process, decreases by 177.87x10 6 tons (converted to coal at the rate 6848 kcal/kg) per year at maximum. Converted to the GNP of the world, this becomes (425 dollar/ton x 177.87 x 10 6 ton=75.6 x 10 9 dollar). This fluctuation width in a year must be compensated by the change of industrial structure and energy supplying means. The countermeasure and preparation are proposed from the viewpoints of the energy and the industrial structure in which nuclear power generation plays important role. The largest production on the earth limited by energy consumption and the temperature balance on the earth is investigated, and the perspective in the future is given. (Yamamoto, Y.)

  11. What value, detection limits

    International Nuclear Information System (INIS)

    Currie, L.A.

    1986-01-01

    Specific approaches and applications of LLD's to nuclear and ''nuclear-related'' measurements are presented in connection with work undertaken for the U.S. Nuclear Regulatory Commission and the International Atomic Energy Agency. In this work, special attention was given to assumptions and potential error sources, as well as to different types of analysis. For the former, the authors considered random and systematic error associated with the blank and the calibration and sample preparation processes, as well as issues relating to the nature of the random error distributions. Analysis types considered included continuous monitoring, ''simple counting'' involving scalar quantities, and spectrum fitting involving data vectors. The investigation of data matrices and multivariate analysis is also described. The most important conclusions derived from this study are: that there is a significant lack of communication and compatibility resulting from diverse terminology and conceptual bases - including no-basis ''ad hoc'' definitions; that the distinction between detection decisions and detection limits is frequently lost sight of; and that quite erroneous LOD estimates follow from inadequate consideration of the actual variability of the blank, and systematic error associated with the blank, the calibration-recovery factor, matrix effects, and ''black box'' data reduction models

  12. The limits of deterrence

    International Nuclear Information System (INIS)

    Tertrais, Bruno

    2009-01-01

    The objective of this contribution is to propose a better insight of the validity of the theory of deterrence, and of related doctrines in more complex and more various situations than in the past: emergence of powers like China and India, of new nuclear States like North Korea and Pakistan, of countries planning to acquire nuclear weapons like Iran, and possibility of a new wave of nuclear proliferation in Middle-East and north-eastern Asia. It also aims at providing arguments in the debates on the struggle against nuclear proliferation and on the future of deterrence. The author first presents and comments the principles of deterrence, and illustrates them by more or less recent historical situations (Iran during the war with Iraq, USA after Pearl Harbour, Arab-Israeli wars, Iraq, and so on). He notably outlines that the notion of deterrence is present in Islamic culture, and that Iran has well integrated it in its defence strategy. Examples of statements and behaviours of other Arab leaders are discussed. The author also briefly indicates how the deterrence strategy is present in the official doctrines of Russia, India, Pakistan, and North Korea. In a second part, based on various examples, the author analyses the practical limitations of deterrence by distinguishing the psychological dimension (bounded rationality, political leaders suffering from various psychological problems, importance of the ideological and spiritual dimension, values prevailing on interests, the case of Iran), and the strategic dimension (good understanding of the enemy, sensitivity of the threat of massive damages, existence of a single decision centre and of an efficient communication). The author finally proposes seven recommendations for better deterrence efficiency

  13. Over the limit.

    Science.gov (United States)

    Qu, G

    1989-01-01

    With over 1 billion population, China is adding some 15 million to that total each year. And in the 18 years from 1982 to 2000, the net increase of Chinese population is expected to exceed 200 million. Because of the gigantic pressure from population and some mistakes in policies, the levels of ecological destruction and environment pollution are both serious. This includes deforestation, grassland degradation, desert encroachment, water resources shortage, and waste of mineral resources. Natural disasters including floods and droughts caused by those problems happen more and more frequently. If development damages the resource base, it can only result in a false prosperity, the so-called hollow economy. A large number of environmental problems result directly or indirectly from the pressure of population growth. Studies show that the appropriate number of people that can be supported by China's 9.6 million sq. km is about 700 million. However, this limit is now exceeded by over 300 million people, and will be exceeded by 500 million by the end of this century. Therefore, the task is to implement a birth control policy. At present, in urban areas, the goal of family planning has been reached, but in rural areas hard work is needed. Population control in urban areas, especially in big and medium-sized cities, includes dealing with the inflow of migrants from the countryside. There are 13 cities with a population above 2 million, 37 cities above 1-2 million, and 75 cities above 0.5-1 million. A lot of cities are very crowded, exerting great pressure on the environment. The booming of rural enterprises could provide a good solution to control the flow of rural people into big and medium-sized cities. The relationship between population, resources, environment, and development should be managed properly.

  14. FED pumped limiter configuration issues

    International Nuclear Information System (INIS)

    Haines, J.R.; Fuller, G.M.

    1983-01-01

    Impurity control in the Fusion Engineering Device (FED) is provided by a toroidal belt pumped limiter. Limiter design issues addressed in this paper are (1) poloidal location of the limiter belt, (2) shape of the limiter surface facing the plasma, and (3) whether the belt is pumped from one or both sides. The criteria used for evaluation of limiter configuration features were sensitivity to plasma-edge conditions and ease of maintenance and fabrication. The evaluation resulted in the selection of a baseline FED limiter that is located at the bottom of the device and has a flat surface with a single leading edge

  15. FED pumped limiter configuration issues

    International Nuclear Information System (INIS)

    Haines, J.R.; Fuller, G.M.

    1983-01-01

    Impurity control in the Fusion Engineering Device (FED) is provided by a toroidal belt pumped limiter. Limiter design issues addressed in this paper are (1) poloidal location of the limiter belt, (2) shape of the limiter surface facing the plasma, and (3) whether the belt is pumped from one or both sides. The criteria used for evaluation of limiter configuration features were sensitivity to plasma edge conditions and ease of maintenance and fabrication. The evaluation resulted in the selection of a baseline FED limiter that is located at the bottom of the device and has a flat surface with a single leading edge

  16. Charter Halibut Limited Access Program

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This limited access system limits the number of charter vessels that may participate in the guided sport fishery for halibut in area 2C and 3A. NMFS issues a charter...

  17. On the Sen limit squared

    OpenAIRE

    Fullwood, James; Wang, Dongxu

    2018-01-01

    We introduce a class of F-theory vacua whose smooth elliptic fibers admit a vanishing $j$-invariant, and construct a weak coupling limit associated with such vacua which we view as the `square' of the Sen limit. We find that while Sen's limit is naturally viewed as an orientifold theory, the universal tadpole relation which equates the D3 charge between the associated F-theory compactification and the limit we construct suggests that perhaps the limiting theory is in fact an oriented theory c...

  18. Interference and memory capacity limitations.

    Science.gov (United States)

    Endress, Ansgar D; Szabó, Szilárd

    2017-10-01

    Working memory (WM) is thought to have a fixed and limited capacity. However, the origins of these capacity limitations are debated, and generally attributed to active, attentional processes. Here, we show that the existence of interference among items in memory mathematically guarantees fixed and limited capacity limits under very general conditions, irrespective of any processing assumptions. Assuming that interference (a) increases with the number of interfering items and (b) brings memory performance to chance levels for large numbers of interfering items, capacity limits are a simple function of the relative influence of memorization and interference. In contrast, we show that time-based memory limitations do not lead to fixed memory capacity limitations that are independent of the timing properties of an experiment. We show that interference can mimic both slot-like and continuous resource-like memory limitations, suggesting that these types of memory performance might not be as different as commonly believed. We speculate that slot-like WM limitations might arise from crowding-like phenomena in memory when participants have to retrieve items. Further, based on earlier research on parallel attention and enumeration, we suggest that crowding-like phenomena might be a common reason for the 3 major cognitive capacity limitations. As suggested by Miller (1956) and Cowan (2001), these capacity limitations might arise because of a common reason, even though they likely rely on distinct processes. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  19. Material limitations on the detection limit in refractometry.

    Science.gov (United States)

    Skafte-Pedersen, Peder; Nunes, Pedro S; Xiao, Sanshui; Mortensen, Niels Asger

    2009-01-01

    We discuss the detection limit for refractometric sensors relying on high-Q optical cavities and show that the ultimate classical detection limit is given by min {Δn} ≳ η, with n + iη being the complex refractive index of the material under refractometric investigation. Taking finite Q factors and filling fractions into account, the detection limit declines. As an example we discuss the fundamental limits of silicon-based high-Q resonators, such as photonic crystal resonators, for sensing in a bio-liquid environment, such as a water buffer. In the transparency window (λ ≳ 1100 nm) of silicon the detection limit becomes almost independent on the filling fraction, while in the visible, the detection limit depends strongly on the filling fraction because the silicon absorbs strongly.

  20. Material Limitations on the Detection Limit in Refractometry

    Directory of Open Access Journals (Sweden)

    Niels Asger Mortensen

    2009-10-01

    Full Text Available We discuss the detection limit for refractometric sensors relying on high-Q optical cavities and show that the ultimate classical detection limit is given by min {Δn} ≳ η with n + iη being the complex refractive index of the material under refractometric investigation. Taking finite Q factors and filling fractions into account, the detection limit declines. As an example we discuss the fundamental limits of silicon-based high-Q resonators, such as photonic crystal resonators, for sensing in a bio-liquid environment, such as a water buffer. In the transparency window (λ ≳ 1100 nm of silicon the detection limit becomes almost independent on the filling fraction, while in the visible, the detection limit depends strongly on the filling fraction because the silicon absorbs strongly.

  1. Material Limitations on the Detection Limit in Refractometry

    OpenAIRE

    Skafte-Pedersen, Peder; Nunes, Pedro S.; Xiao, Sanshui; Mortensen, Niels Asger

    2009-01-01

    We discuss the detection limit for refractometric sensors relying on high-Q optical cavities and show that the ultimate classical detection limit is given by min {Δn} ≳ η with n + iη being the complex refractive index of the material under refractometric investigation. Taking finite Q factors and filling fractions into account, the detection limit declines. As an example we discuss the fundamental limits of silicon-based high-Q resonators, such as photonic crystal resonators, for sensing in a...

  2. Thermodynamic limit for coherence-limited solar power conversion

    Science.gov (United States)

    Mashaal, Heylal; Gordon, Jeffrey M.

    2014-09-01

    The spatial coherence of solar beam radiation is a key constraint in solar rectenna conversion. Here, we present a derivation of the thermodynamic limit for coherence-limited solar power conversion - an expansion of Landsberg's elegant basic bound, originally limited to incoherent converters at maximum flux concentration. First, we generalize Landsberg's work to arbitrary concentration and angular confinement. Then we derive how the values are further lowered for coherence-limited converters. The results do not depend on a particular conversion strategy. As such, they pertain to systems that span geometric to physical optics, as well as classical to quantum physics. Our findings indicate promising potential for solar rectenna conversion.

  3. Material limitations on the detection limit in refractometry

    DEFF Research Database (Denmark)

    Skafte-Pedersen, Peder; Nunes, Pedro; Xiao, Sanshui

    2009-01-01

    We discuss the detection limit for refractometric sensors relying on high-Q optical cavities and show that the ultimate classical detection limit is given by min {Δn} ≳ η with n + iη being the complex refractive index of the material under refractometric investigation. Taking finite Q factors and...

  4. Further limitations on nuclear testing

    International Nuclear Information System (INIS)

    Brown, P.S.

    1991-11-01

    This document addresses a number of subjects related to further constraints on nuclear testing, briefly discussing each of the following topics: the current political situation, the kinds of steps that might next be taken in test limitations and the impacts of further testing limits, the need for a test ban readiness program, some issues related to verification, and the possibility of confidence building measures as alternative, or near-term, steps to further test limitations

  5. ICRF power limitation relation to density limit in ASDEX

    International Nuclear Information System (INIS)

    Ryter, F.

    1992-01-01

    Launching high ICRF power into ASDEX plasmas required good antenna-plasma coupling. This could be achieved by sufficient electron density in front of the antennas i.e. small antenna-plasma distance (1-2 cm) and moderate to high line-averaged electron density compared to the density window in ASDEX. These are conditions eventually close to the density limit. ICRF heated discharges terminated by plasma disruptions caused by the RF pulse limited the maximum RF power which can be injected into the plasma. The disruptions occurring in these cases have clear phenomenological similarities with those observed in density limit discharges. We show in this paper that the ICRF-power limitation by plasma disruptions in ASDEX was due to reaching the density limit. (orig.)

  6. ICRF power limitation relation to density limit in ASDEX

    International Nuclear Information System (INIS)

    Ryter, F.

    1992-01-01

    Launching high ICRF power into ASDEX plasmas required good antenna-plasma coupling. This could be achieved by sufficient electron density in front of the antennas i.e. small antenna-plasma distance (1-2 cm) and moderate to high line-averaged electron density compared to the density window in ASDEX. These are conditions eventually close to the density limit. ICRF heated discharges terminated by plasma disruptions caused by the RF pulse limited the maximum RF power which can be injected into the plasma. The disruptions occurring in these cases have clear phenomenological similarities with those observed in density limit discharges. We show in this paper that the ICRF-power limitation by plasma disruptions in ASDEX was due to reaching the density limit. (author) 3 refs., 3 figs

  7. Limit cycles in quantum systems

    Energy Technology Data Exchange (ETDEWEB)

    Niemann, Patrick

    2015-04-27

    In this thesis we investigate Limit Cycles in Quantum Systems. Limit cycles are a renormalization group (RG) topology. When degrees of freedom are integrated out, the coupling constants flow periodically in a closed curve. The presence of limit cycles is restricted by the necessary condition of discrete scale invariance. A signature of discrete scale invariance and limit cycles is log-periodic behavior. The first part of this thesis is concerned with the study of limit cycles with the similarity renormalization group (SRG). Limit cycles are mainly investigated within conventional renormalization group frameworks, where degrees of freedom, which are larger than a given cutoff, are integrated out. In contrast, in the SRG potentials are unitarily transformed and thereby obtain a band-diagonal structure. The width of the band structure can be regarded as an effective cutoff. We investigate the appearance of limit cycles in the SRG evolution. Our aim is to extract signatures as well as the scaling factor of the limit cycle. We consider the 1/R{sup 2}-potential in a two-body system and a three-body system with large scattering lengths. Both systems display a limit cycle. Besides the frequently used kinetic energy generator we apply the exponential and the inverse generator. In the second part of this thesis, Limit Cycles at Finite Density, we examine the pole structure of the scattering amplitude for distinguishable fermions at zero temperature in the medium. Unequal masses and a filled Fermi sphere for each fermion species are considered. We focus on negative scattering lengths and the unitary limit. The properties of the three-body spectrum in the medium and implications for the phase structure of ultracold Fermi gases are discussed.

  8. Magnetic shielding of a limiter

    International Nuclear Information System (INIS)

    Brevnov, N.N.; Stepanov, S.B.; Khimchenko, L.N.; Matthews, G.F.; Goodal, D.H.J.

    1991-01-01

    Localization of plasma interaction with material surfaces in a separate chamber, from where the escape of impurities is hardly realized, i.e. application of magnetic divertors or pump limiters, is the main technique for reduction of the impurity content in a plasma. In this case, the production of a divertor configuration requires a considerable power consumption and results in a less effective utilization of the magnetic field volume. Utilization of a pump limiter, for example the ICL-type, under tokamak-reactor conditions would result in the extremely high and forbidden local heat loadings onto the limiter surface. Moreover, the magnetically-shielded pump limiter (MSL) was proposed to combine positive properties of the divertor and the pump limiter. The idea of magnetic shielding is to locate the winding with current inside the limiter head so that the field lines of the resultant magnetic field do not intercept the limiter surface. In this case the plasma flows around the limiter leading edges and penetrates into the space under the limiter. The shielding magnetic field can be directed either counter the toroidal field or counter the poloidal one of a tokamak, dependent on the concrete diagram of the device. Such a limiter has a number of advantages: -opportunity to control over the particle and impurity recycling without practical influence upon the plasma column geometry, - perturbation of a plasma column magnetic configuration from the side of such a limiter is less than that from the side of the divertor coils. The main deficiency is the necessity to locate active windings inside the discharge chamber. (author) 5 refs., 3 figs

  9. Tachyons in the Galilean limit

    Energy Technology Data Exchange (ETDEWEB)

    Batlle, Carles [Departament de Matemàtiques and IOC, Universitat Politècnica de Catalunya, EPSEVG,Av. V. Balaguer 1, Vilanova i la Geltrú, E-08808 (Spain); Gomis, Joaquim [Departament de Física Quàntica i Astrofísica and Institut de Ciències del Cosmos (ICCUB),Universitat de Barcelona, Martí i Franquès 1, Barcelona, E-08028 (Spain); Mezincescu, Luca [Department of Physics, University of Miami,P.O. Box 248046, Coral Gables, FL, 33124 (United States); Townsend, Paul K. [Department of Applied Mathematics and Theoretical Physics, Centre for Mathematical Sciences,University of Cambridge, Wilberforce Road, Cambridge, CB3 0WA (United Kingdom)

    2017-04-20

    The Souriau massless Galilean particle of “colour” k and spin s is shown to be the Galilean limit of the Souriau tachyon of mass m=ik and spin s. We compare and contrast this result with the Galilean limit of the Nambu-Goto string and Green-Schwarz superstring.

  10. Solubility limits on radionuclide dissolution

    Energy Technology Data Exchange (ETDEWEB)

    Kerrisk, J.F.

    1984-12-31

    This paper examines the effects of solubility in limiting dissolution rates of a number of important radionuclides from spent fuel and high-level waste. Two simple dissolution models were used for calculations that would be characteristics of a Yucca Mountain repository. A saturation-limited dissolution model, in which the water flowing through the repository is assumed to be saturated with each waste element, is very conservative in that it overestimates dissolution rates. A diffusion-limited dissolution model, in which element-dissolution rates are limited by diffusion of waste elements into water flowing past the waste, is more realistic, but it is subject to some uncertainty at this time. Dissolution rates of some elements (Pu, Am, Sn, Th, Zr, Sm) are always limited by solubility. Dissolution rates of other elements (Cs, Tc, Np, Sr, C, I) are never solubility limited; their release would be limited by dissolution of the bulk waste form. Still other elements (U, Cm, Ni, Ra) show solubility-limited dissolution under some conditions. 9 references, 3 tables.

  11. Dose limits for ionising radiation

    International Nuclear Information System (INIS)

    Gifford, D.

    1989-01-01

    Dose limits for exposure to ionising radiation are assessed to see if they give sufficient protection both for the occupationally exposed and for the general public. It is concluded that current limits give a level of safety that satisfies the necessary criteria in the light of present knowledge and further reductions would be unlikely to improve standards of safety. (author)

  12. FUEL CASK IMPACT LIMITER VULNERABILITIES

    International Nuclear Information System (INIS)

    Leduc, D.; England, J.; Rothermel, R.

    2009-01-01

    Cylindrical fuel casks often have impact limiters surrounding just the ends of the cask shaft in a typical 'dumbbell' arrangement. The primary purpose of these impact limiters is to absorb energy to reduce loads on the cask structure during impacts associated with a severe accident. Impact limiters are also credited in many packages with protecting closure seals and maintaining lower peak temperatures during fire events. For this credit to be taken in safety analyses, the impact limiter attachment system must be shown to retain the impact limiter following Normal Conditions of Transport (NCT) and Hypothetical Accident Conditions (HAC) impacts. Large casks are often certified by analysis only because of the costs associated with testing. Therefore, some cask impact limiter attachment systems have not been tested in real impacts. A recent structural analysis of the T-3 Spent Fuel Containment Cask found problems with the design of the impact limiter attachment system. Assumptions in the original Safety Analysis for Packaging (SARP) concerning the loading in the attachment bolts were found to be inaccurate in certain drop orientations. This paper documents the lessons learned and their applicability to impact limiter attachment system designs

  13. Beam-limiting and radiation-limiting interlocks

    International Nuclear Information System (INIS)

    Macek, R.J.

    1996-01-01

    This paper reviews several aspects of beam-limiting and radiation- limiting interlocks used for personnel protection at high-intensity accelerators. It is based heavily on the experience at the Los Alamos Neutron Science Center (LANSCE) where instrumentation-based protection is used extensively. Topics include the need for ''active'' protection systems, system requirements, design criteria, and means of achieving and assessing acceptable reliability. The experience with several specific devices (ion chamber-based beam loss interlock, beam current limiter interlock, and neutron radiation interlock) designed and/or deployed to these requirements and criteria is evaluated

  14. Limits to magnetic resonance microscopy

    International Nuclear Information System (INIS)

    Glover, Paul; Mansfield, Peter

    2002-01-01

    The last quarter of the twentieth century saw the development of magnetic resonance imaging (MRI) grow from a laboratory demonstration to a multi-billion dollar worldwide industry. There is a clinical body scanner in almost every hospital of the developed nations. The field of magnetic resonance microscopy (MRM), after mostly being abandoned by researchers in the first decade of MRI, has become an established branch of the science. This paper reviews the development of MRM over the last decade with an emphasis on the current state of the art. The fundamental principles of imaging and signal detection are examined to determine the physical principles which limit the available resolution. The limits are discussed with reference to liquid, solid and gas phase microscopy. In each area, the novel approaches employed by researchers to push back the limits of resolution are discussed. Although the limits to resolution are well known, the developments and applications of MRM have not reached their limit. (author)

  15. LANSCE Beam Current Limiter (XL)

    International Nuclear Information System (INIS)

    Gallegos, F.R.; Hall, M.J.

    1997-01-01

    The Radiation Security System (RSS) at the Los Alamos Neutron Science Center (LANSCE) is an engineered safety system that provides personnel protection from prompt radiation due to accelerated proton beams. The Beam Current Limiter (XL), as an active component of the RSS, limits the maximum average current in a beamline, thus the current available for a beam spill accident. Exceeding the pre-set limit initiates action by the RSS to mitigate the hazard (insertion of beam stoppers in the low energy beam transport). The beam limiter is an electrically isolated, toroidal transformer and associated electronics. The device was designed to continuously monitor beamline currents independent of any external timing. Fail-safe operation was a prime consideration in its development. Fail-safe operation is defined as functioning as intended (due to redundant circuitry), functioning with a more sensitive fault threshold, or generating a fault condition. This report describes the design philosophy, hardware, implementation, operation, and limitations of the device

  16. Tokamak plasma interaction with limiters

    International Nuclear Information System (INIS)

    Pitcher, C.S.

    1987-11-01

    The importance of plasma purity is first discussed in terms of the general requirements of controlled thermonuclear fusion. The tokamak approach to fusion and its inherent problem of plasma contamination are introduced. A main source of impurities is due to the bombardment of the limiter by energetic particles and thus the three main aspects of the plasma-limiter interaction are reviewed, boundary plasma conditions, fuelling/recycling and impurity production. The experiments, carried out on the DITE tokamak at Culham Laboratory, UK, investigated these three topics and the results are compared with predicted behaviour; new physical phenomena are presented in all three areas. Simple one-dimensional fluid equations are found to adequately describe the SOL plasma, except in regard to the pre-sheath electric field and ambipolarity; that is, the electric field adjacent to the limiter surface appears to be weak and the associated plasma flow can be non-ambipolar. Recycling of fuel particles from the limiter is observed to be near unity at all times. The break-up behaviour of recycled and gas puffed D 2 molecules is dependent on the electron temperature, as expected. Impurity production at the limiter is chemical erosion of graphite being negligible. Deposition of limiter and wall-produced impurities is found on the limiter. The spatial distributions of impurities released from the limiter are observed and are in good agreement with a sputtered atom transport code. Finally, preliminary experiments on the transport of impurity ions along field lines away from the limiter have been performed and compared with simple analytic theory. The results suggest that the pre-sheath electric field in the SOL is much weaker than the simple fluid model would predict

  17. The Limits of Exercise Physiology

    DEFF Research Database (Denmark)

    Gabriel, Brendan M; Zierath, Juleen R

    2017-01-01

    Many of the established positive health benefits of exercise have been documented by historical discoveries in the field of exercise physiology. These investigations often assess limits: the limits of performance, or the limits of exercise-induced health benefits. Indeed, several key findings have...... been informed by studying highly trained athletes, in addition to healthy or unhealthy people. Recent progress has been made in regard to skeletal muscle metabolism and personalized exercise regimes. In this perspective, we review some of the historical milestones of exercise physiology, discuss how...

  18. Information Processing and Limited Liability

    OpenAIRE

    Bartosz Mackowiak; Mirko Wiederholt

    2012-01-01

    Decision-makers often face limited liability and thus know that their loss will be bounded. We study how limited liability affects the behavior of an agent who chooses how much information to acquire and process in order to take a good decision. We find that an agent facing limited liability processes less information than an agent with unlimited liability. The informational gap between the two agents is larger in bad times than in good times and when information is more costly to process.

  19. Limited Releases of Krsko NPP

    International Nuclear Information System (INIS)

    Breznik, B.; Kovac, A.

    2001-01-01

    Full text: Krsko Nuclear Power Plant is about 700 MW Pressurised Water Reactor plant located in Slovenia close to the border with Croatia. The authorised limit for the radioactive releases is basically set to 50 μSv effective dose per year to the members of the public. There is also additional limitation of total activities released in a year and concentration. The poster presents the effluents of the year 2000 and evaluated dose referring to the limits and to the natural and other sources of radiation around the plant. (author)

  20. Nuclear Structure at the Limits

    International Nuclear Information System (INIS)

    Nazarewicz, W.

    1998-01-01

    One of the frontiers of todays nuclear science is the journey to the limits of atomic charge and nuclear mass, of neutron-to-proton ratio, and of angular momentum. The tour to the limits is not only a quest for new, exciting phenomena, but the new data are expected, as well, to bring qualitatively new information about the fundamental properties of the nucleonic many-body system, the nature of the nuclear interaction, and nucleonic correlations at various energy-distance scales. In this series of lectures, current developments in nuclear structure at the limits are discussed from a theoretical perspective, mainly concentrating on medium-mass and heavy nuclei

  1. Biased limiter experiments on text

    International Nuclear Information System (INIS)

    Phillips, P.E.; Wootton, A.J.; Rowan, W.L.; Ritz, C.P.; Rhodes, T.L.; Bengtson, R.D.; Hodge, W.L.; Durst, R.D.; McCool, S.C.; Richards, B.; Gentle, K.W.; Schoch, P.; Forster, J.C.; Hickok, R.L.; Evans, T.E.

    1987-01-01

    Experiments using an electrically biased limiter have been performed on the Texas Experimental Tokamak (TEXT). A small movable limiter is inserted past the main poloidal ring limiter (which is electrically connected to the vacuum vessel) and biased at V Lim with respect to it. The floating potential, plasma potential and shear layer position can be controlled. With vertical strokeV Lim vertical stroke ≥ 50 V the plasma density increases. For V Lim Lim > 0 the results obtained are inconclusive. Variation of V Lim changes the electrostatic turbulence which may explain the observed total flux changes. (orig.)

  2. Superconducting dc fault current limiter

    International Nuclear Information System (INIS)

    Cointe, Y.

    2007-12-01

    Within the framework of the electric power market liberalization, DC networks have many interests compared to alternative ones, but their protections need to use new systems. Superconducting fault current limiters enable by an overstepping of the critical current to limit the fault current to a preset value, lower than the theoretical short-circuit current. For these applications, coated conductors offer excellent opportunities. We worked on the implementation of these materials and built a test bench. We carried out limiting experiments to estimate the quench homogeneity at various short-circuit parameters. An important point is the temperature measurement by deposited sensors on the ribbon, results are in good correlation with the theoretical models. Improved quench behaviours for temperatures close to the critical temperature have been confirmed. Our results enable to better understand the limitation mechanisms of coated conductors. (author)

  3. Guidelines for setting speed limits

    CSIR Research Space (South Africa)

    Wium, DJW

    1986-02-01

    Full Text Available , parking and loading manoeuvres, access to bounding properties, intersections, width of road without central median and clear roadside area. The method should result in greater uniformity in speed limits for similar circumstances as set by different...

  4. The Limits to Giving Back

    Directory of Open Access Journals (Sweden)

    Jade S. Sasser

    2014-07-01

    Full Text Available In this thematic section, authors consider the limitations on giving back that they faced in field research, or saw others face. For some authors, their attempts at giving back were severely limited by the scope of their projects, or their understandings of local cultures or histories. For others, very specific circumstances and historical interventions of foreigners in certain places can limit how and to what extent a researcher is able to have a reciprocal relationship with the participating community. Some authors, by virtue of their lesser positions of power relative to those that they were studying, simply decided not to give back to those communities. In each article it becomes apparent that how and in what ways people give back is unique (and limited both to their personal values and the contexts in which they do research.

  5. Multifamily Tax Subsidy Income Limits

    Data.gov (United States)

    Department of Housing and Urban Development — Multifamily Tax Subsidy Projects (MTSP) Income Limits were developed to meet the requirements established by the Housing and Economic Recovery Act of 2008 (Public...

  6. US ITER limiter module design

    International Nuclear Information System (INIS)

    Mattas, R.F.; Billone, M.; Hassanein, A.

    1996-08-01

    The recent U.S. effort on the ITER (International Thermonuclear Experimental Reactor) shield has been focused on the limiter module design. This is a multi-disciplinary effort that covers design layout, fabrication, thermal hydraulics, materials evaluation, thermo- mechanical response, and predicted response during off-normal events. The results of design analyses are presented. Conclusions and recommendations are also presented concerning, the capability of the limiter modules to meet performance goals and to be fabricated within design specifications using existing technology

  7. Time Limits : Effects on Recall

    OpenAIRE

    Hirano, Kinue

    2000-01-01

    This study investigates the effects of differing time limits and the level of language proficiency on the written recalls of 66 Japanese EFL undergraduates. Results showed that different time limits affected total recall, but not main ideas recalled. Regardless of proficiency level, the 20-minute group (Group 2) recalled a greater number of idea units than the 8-minute group (Group 1). However, no significant difference was found between Groups 1 and 2 regarding the recall of main ideas, alth...

  8. Limits on the photon mass

    International Nuclear Information System (INIS)

    Vasseur, G.

    1996-03-01

    Is the photon mass strictly null as it is told in quantum electrodynamics. In fact, a coherent theory can be build with a massive photon. Experiences have been regularly led to try to make obvious an eventual non null photon mass. Superior limits more and more strict have been found. Here is given a general survey of the consequences of a non null photon mass, different methods to measure it and the achieved limits. (author). 30 refs., 1 fig

  9. Limited Memory, Categorization, and Competition

    OpenAIRE

    Yuxin Chen; Ganesh Iyer; Amit Pazgal

    2010-01-01

    This paper investigates the effects of a limited consumer memory on the price competition between firms. It studies a specific aspect of memory--namely, the categorization of available price information that the consumers may need to recall for decision making. This paper analyzes competition between firms in a market with uninformed consumers who do not compare prices, informed consumers who compare prices but with limited memory, and informed consumers who have perfect memory. Consumers, aw...

  10. Major Limitations of Satellite images

    OpenAIRE

    Al-Wassai, Firouz A.; Kalyankar, N. V.

    2013-01-01

    Remote sensing has proven to be a powerful tool for the monitoring of the Earth surface to improve our perception of our surroundings has led to unprecedented developments in sensor and information technologies. However, technologies for effective use of the data and for extracting useful information from the data of Remote sensing are still very limited since no single sensor combines the optimal spectral, spatial and temporal resolution. This paper briefly reviews the limitations of satelli...

  11. The JET belt limiter tiles

    International Nuclear Information System (INIS)

    Deksnis, E.

    1988-09-01

    The belt limiter system, comprising two full toroidal rings of limiter tiles, was installed in JET in 1987. In consists of water-cooled fins with the limiter material in form of tile inbetween. The tiles are designed to absorb heat fluxes during irradiation without the surface temperature exceeding 2000 0 C and to radiate this heat between pulses to the water cooled sink whose temperature is lower than that of the vacuum vessel. An important feature of the design is to maximise the area of the radiating surface facing the water cooled fin. This leads to a tile depth much greater than the width of the tile facing the heat flux. Limiter tiles intercept particles flowing out of the plasma through the area between the two belt limiter rings and through remaining surface area of the plasma column. Power deposition to a limiter tile depends strongly on the shape of the plasma, the edge plasma properties as well as on the surface profile of the tiles. This paper will discuss the methodology that was followed in producing an optimized surface profile of the tiles. This shaped profile has the feature that the resulting power deposition profile is roughly similar for a wide range of plasma parameters. (author)

  12. Passive fault current limiting device

    Science.gov (United States)

    Evans, Daniel J.; Cha, Yung S.

    1999-01-01

    A passive current limiting device and isolator is particularly adapted for use at high power levels for limiting excessive currents in a circuit in a fault condition such as an electrical short. The current limiting device comprises a magnetic core wound with two magnetically opposed, parallel connected coils of copper, a high temperature superconductor or other electrically conducting material, and a fault element connected in series with one of the coils. Under normal operating conditions, the magnetic flux density produced by the two coils cancel each other. Under a fault condition, the fault element is triggered to cause an imbalance in the magnetic flux density between the two coils which results in an increase in the impedance in the coils. While the fault element may be a separate current limiter, switch, fuse, bimetal strip or the like, it preferably is a superconductor current limiter conducting one-half of the current load compared to the same limiter wired to carry the total current of the circuit. The major voltage during a fault condition is in the coils wound on the common core in a preferred embodiment.

  13. Preliminary disposal limits, plume interaction factors, and final disposal limits

    Energy Technology Data Exchange (ETDEWEB)

    Flach, G. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2018-01-11

    In the 2008 E-Area Performance Assessment (PA), each final disposal limit was constructed as the product of a preliminary disposal limit and a plume interaction factor. The following mathematical development demonstrates that performance objectives are generally expected to be satisfied with high confidence under practical PA scenarios using this method. However, radionuclides that experience significant decay between a disposal unit and the 100-meter boundary, such as H-3 and Sr-90, can challenge performance objectives, depending on the disposed-of waste composition, facility geometry, and the significance of the plume interaction factor. Pros and cons of analyzing single disposal units or multiple disposal units as a group in the preliminary disposal limits analysis are also identified.

  14. Power limit and quality limit of natural circulation reactor

    International Nuclear Information System (INIS)

    Zhao Guochang; Ma Changwen

    1997-01-01

    The circulation characteristics of natural circulation reactor in boiling regime are researched. It is found that, the circulation mass flow rate and the power have a peak value at a mass quality respectively. Therefore, the natural circulation reactor has a power limit under certain technological condition. It can not be increased steadily by continually increasing the mass quality. Corresponding to this, the mass quality of natural circulation reactor has a reasonable limit. The relations between the maximum power and the reactor parameters, such as the resistance coefficient, the working pressure and so on, are analyzed. It is pointed out that the power limit of natural circulation reactor is about 1000 MW at present technological condition. Taking the above result and low quality stability experimental result into account, the authors recommend that the reasonable mass quality of natural circulation reactor working in boiling regime is from 2% to 3% under the researched working pressure

  15. Time-limited optimal dynamics beyond the Quantum Speed Limit

    DEFF Research Database (Denmark)

    Gajdacz, Miroslav; Das, Kunal K.; Arlt, Jan

    2015-01-01

    The quantum speed limit sets the minimum time required to transfer a quantum system completely into a given target state. At shorter times the higher operation speed has to be paid with a loss of fidelity. Here we quantify the trade-off between the fidelity and the duration in a system driven......-off expressed in terms of the direct Hilbert velocity provides a robust prediction of the quantum speed limit and allows to adapt the control optimization such that it yields a predefined fidelity. The results are verified numerically in a multilevel system with a constrained Hamiltonian, and a classification...

  16. Hydrodynamic Limit of Multiple SLE

    Science.gov (United States)

    Hotta, Ikkei; Katori, Makoto

    2018-04-01

    Recently del Monaco and Schleißinger addressed an interesting problem whether one can take the limit of multiple Schramm-Loewner evolution (SLE) as the number of slits N goes to infinity. When the N slits grow from points on the real line R in a simultaneous way and go to infinity within the upper half plane H, an ordinary differential equation describing time evolution of the conformal map g_t(z) was derived in the N → ∞ limit, which is coupled with a complex Burgers equation in the inviscid limit. It is well known that the complex Burgers equation governs the hydrodynamic limit of the Dyson model defined on R studied in random matrix theory, and when all particles start from the origin, the solution of this Burgers equation is given by the Stieltjes transformation of the measure which follows a time-dependent version of Wigner's semicircle law. In the present paper, first we study the hydrodynamic limit of the multiple SLE in the case that all slits start from the origin. We show that the time-dependent version of Wigner's semicircle law determines the time evolution of the SLE hull, K_t \\subset H\\cup R, in this hydrodynamic limit. Next we consider the situation such that a half number of the slits start from a>0 and another half of slits start from -a exact solutions, we will discuss the universal long-term behavior of the multiple SLE and its hull K_t in the hydrodynamic limit.

  17. Generalized Geometric Quantum Speed Limits

    Directory of Open Access Journals (Sweden)

    Diego Paiva Pires

    2016-06-01

    Full Text Available The attempt to gain a theoretical understanding of the concept of time in quantum mechanics has triggered significant progress towards the search for faster and more efficient quantum technologies. One of such advances consists in the interpretation of the time-energy uncertainty relations as lower bounds for the minimal evolution time between two distinguishable states of a quantum system, also known as quantum speed limits. We investigate how the nonuniqueness of a bona fide measure of distinguishability defined on the quantum-state space affects the quantum speed limits and can be exploited in order to derive improved bounds. Specifically, we establish an infinite family of quantum speed limits valid for unitary and nonunitary evolutions, based on an elegant information geometric formalism. Our work unifies and generalizes existing results on quantum speed limits and provides instances of novel bounds that are tighter than any established one based on the conventional quantum Fisher information. We illustrate our findings with relevant examples, demonstrating the importance of choosing different information metrics for open system dynamics, as well as clarifying the roles of classical populations versus quantum coherences, in the determination and saturation of the speed limits. Our results can find applications in the optimization and control of quantum technologies such as quantum computation and metrology, and might provide new insights in fundamental investigations of quantum thermodynamics.

  18. The estimation of derived limits

    International Nuclear Information System (INIS)

    Harrison, N.T.; Bryant, P.M.; Clarke, R.H.; Morley, F.

    1979-08-01

    In practical radiation protection, it is often necessary to calculate limits of intake of radionuclides associated with various quantities; such limits are needed, for example, to assess the adequacy of the control of environmental contamination. In publication 26 of the International Commission on Radiological Protection (ICRP), these limits, when related to the basic limits of dose-equivalent by a defined model, are referred to as Derived Limits (DLs). In the present report the principles to be adopted by the Board in calculating DLs to be recommended for general application within the United Kingdom are outlined. DLs will be recommended for a wide range of radionuclides and for circumstances relevant to the workplace, and, more frequently, the general environment. The latter will include DLs in foodstuffs and associated environmental materials, such as soil and grass, and DLs for discharges from stacks. DLs will be related to dose equivalents for workers or members of the public for stochastic or non-stochastic effects as appropriate. Consideration will be given to relevant data on radiosensitivity, metabolism and dosimetry for children and to the physicochemical forms of radionuclides. (author)

  19. Penrose limits and RG flows

    International Nuclear Information System (INIS)

    Gimon, Eric G.; Sonnenschein, Jacob; Pando Zayas, Leopoldo A.

    2002-01-01

    The Penrose-Gueven limit simplifies a given supergravity solution into a pp-wave background. Aiming at clarifying its relation to renormalization group flow we study the Penrose-Guven limit of supergravity backgrounds that are dual to non-conformal gauge theories. The resulting backgrounds fall in a class simple enough that the quantum particle is exactly solvable. We propose a map between the effective time-dependent quantum mechanical problem and the RG flow in the gauge theory. As a testing ground we consider explicitly two Penrose limits of the infrared fixed point of the Pilch-Warner solution. We analyze the corresponding gauge theory picture and write down the operators which are the duals of the low lying string states. We also address RG flows of a different nature by considering the Penrose-Gueven limit of a stack of N D p branes. We note that in the far IR (for p<3)the limit generically has negative mass-squared. This phenomenon signals, in the world sheet picture, the necessity to transform to another description. In this regard, we consider explicitly the cases of M2 from D2 and F1 from D1. (author)

  20. Derived limits for surface contamination

    CERN Document Server

    Wrixon, A D; Linsley, G S; White, D F

    1979-01-01

    Derived limits (DLs) for surface contamination were first established for use in the nuclear energy industry where a wide variety of radionuclides is encountered. They were later used in factories, hospitals, and universities, where the radionuclides used are normally fewer in number, either known or readily identifiable, and often of low toxicity. In these situations the current limits are frequently over-restrictive. This report describes a reassessment of the values in the light of more recent information on the possible pathways of exposure and the dose equivalent limits given in ICRP Publication 26. The reassessment is prompted also by the introduction of SI units. The results of the reassessment are used to produce a classification of DLs for all radionuclides for active and inactive area surfaces and for skin.

  1. Magnetic limiter for thermonuclear device

    International Nuclear Information System (INIS)

    Shimizu, Masatsugu; Nakamura, Hiroo; Takatsu, Hideyuki; Minato, Akihiko; Fukushima, Yutaka.

    1979-01-01

    Purpose: To decrease X-ray irradiation to coils by constituting magnetic limiters as a laminated structure of a carbon outer layer contacting to plasma and an inner molybdenum layer to thereby reduce braking radiation and secondary X-ray generation. Constitution: Magnetic limiters having a molybdenum substrate laminated with a carbon coating on the front surface is provided to a plasma-confining vacuum container. Fast electrons generated from plasma collide against the magnetic limiter and they are stopped by the carbon layer for suppressing the braking radiation, whereby the braking radiation is ended and the X-rays are decayed by the molybdenum layer. This can decrease the amount of X-rays irradiated on the coil. (Kawakami, Y.)

  2. Density limit in JT-60

    International Nuclear Information System (INIS)

    Kamada, Yutaka; Hosogane, Nobuyuki; Hirayama, Toshio; Tsunematsu, Toshihide

    1990-05-01

    This report studies mainly the density limit for a series of gas- and pellet-fuelled limiter discharges in JT-60. With the pellet injection into high-current/low-q (q(a)=2.3∼2.5) discharges, the Murakami factor reaches up to 10∼13 x 10 19 m -2 T -1 . The values are about factors of 1.5∼2.0 higher than those for usual gas-fuelled discharges. The pellet injected discharges have high central density, whereas the electron density in the outer region (a/2 abs and n e 2 (r=50 cm) x Z eff (r=50 cm). (author)

  3. Density limit experiments on FTU

    International Nuclear Information System (INIS)

    Pucella, G.; Tudisco, O.; Apicella, M.L.; Apruzzese, G.; Artaserse, G.; Belli, F.; Boncagni, L.; Botrugno, A.; Buratti, P.; Calabrò, G.; Castaldo, C.; Cianfarani, C.; Cocilovo, V.; Dimatteo, L.; Esposito, B.; Frigione, D.; Gabellieri, L.; Giovannozzi, E.; Bin, W.; Granucci, G.

    2013-01-01

    One of the main problems in tokamak fusion devices concerns the capability to operate at a high plasma density, which is observed to be limited by the appearance of catastrophic events causing loss of plasma confinement. The commonly used empirical scaling law for the density limit is the Greenwald limit, predicting that the maximum achievable line-averaged density along a central chord depends only on the average plasma current density. However, the Greenwald density limit has been exceeded in tokamak experiments in the case of peaked density profiles, indicating that the edge density is the real parameter responsible for the density limit. Recently, it has been shown on the Frascati Tokamak Upgrade (FTU) that the Greenwald density limit is exceeded in gas-fuelled discharges with a high value of the edge safety factor. In order to understand this behaviour, dedicated density limit experiments were performed on FTU, in which the high density domain was explored in a wide range of values of plasma current (I p = 500–900 kA) and toroidal magnetic field (B T = 4–8 T). These experiments confirm the edge nature of the density limit, as a Greenwald-like scaling holds for the maximum achievable line-averaged density along a peripheral chord passing at r/a ≃ 4/5. On the other hand, the maximum achievable line-averaged density along a central chord does not depend on the average plasma current density and essentially depends on the toroidal magnetic field only. This behaviour is explained in terms of density profile peaking in the high density domain, with a peaking factor at the disruption depending on the edge safety factor. The possibility that the MARFE (multifaced asymmetric radiation from the edge) phenomenon is the cause of the peaking has been considered, with the MARFE believed to form a channel for the penetration of the neutral particles into deeper layers of the plasma. Finally, the magnetohydrodynamic (MHD) analysis has shown that also the central line

  4. Penser aux/les limites de nos limites

    Directory of Open Access Journals (Sweden)

    Jacques Lévy

    2010-12-01

    Full Text Available Le mot « frontière » a beaucoup de succès, dans son sens propre mais plus encore comme métaphore d’une multitude de réalités qui ont à voir avec les limites, c’est-à-dire avec notre propension à découper le monde en objets séparables. Mais on constate une grande indétermination entre concept et métaphore et un usage trop facile de mélanges entre ceux-ci. Il faut donc d’abord admettre que la matérialité n’est qu’une des composantes de notre monde, mais que l’immatériel n’est pas l’irréel, le simulé ou le métaphorique. Après un détour par une théorie des limites et ses limites et une distinction entre le topographique (continu et le topologique (discontinu appliquée à l’intérieur et aux limites d’une aire, deux exemples sont développés qui visent à montrer que, si l’on trouve des frontières, ce n’est pas forcément là où on les attend et que l’appréciation juste de la place des frontières suppose la prise en compte de bien d’autres considérations que la seule limitation volontaire et brutale du franchissement d’une ligne imaginaire tracée au sol.Think about limits and the limits of our limitsThe word “boundary” has been very successful in its literal sense but even more so as a metaphor of a multitude of realities involving limits, that is, with regards to our tendency to divide the world into separable objects. However, one can observe a considerable uncertainty between the concept and the metaphor and an utilisation too easy of various mixtures of them. It becomes necessary therefore to first admit that materiality is only one of the components of our world whilst the immaterial is not unreal, simulated or metaphoric. After a detour consisting of examining a theory of limits and its limits and making the distinction between the topographic (continuous and the topologic (discontinuous applied to the interior and the limits of an area, two examples are developed which aim to

  5. Globalization and limit to growth

    International Nuclear Information System (INIS)

    Gros, D.

    2009-01-01

    A global financial crisis is not the only concern the world should have. From oil and other commodities new challenges arise, that could be difficult to face properly and could provide another limit to growth. This Malthusian feature of the 21. century emerges clearly if one focuses on climate change. [it

  6. ITER operating limit definition criteria

    International Nuclear Information System (INIS)

    Ciattaglia, S.; Barabaschi, P.; Carretero, J.A.; Chiocchio, S.; Hureau, D.; Girard, J.Ph.; Gordon, C.; Portone, A.; Rodrigo, L. Rodriguez; Roldan, C.; Saibene, G.; Uzan-Elbez, J.

    2009-01-01

    The operating limits and conditions (OLCs) are operating parameters and conditions, chosen among all system/components, which, together, define the domain of the safe operation of ITER in all foreseen ITER states (operation, maintenance, commissioning). At the same time they are selected to guarantee the required operation flexibility which is a critical factor for the success of an experimental machine such as ITER. System and components that are important for personnel or public safety (safety important class, SIC) are identified considering their functional importance in the overall plant safety analysis. SIC classification has to be presented already in the preliminary safety analysis report and approved by the licensing authority before manufacturing and construction. OLCs comprise the safety limits that, if exceeded, could result in a potential safety hazard, the relevant settings that determine the intervention of SIC systems, and the operational limits on equipment which warn against or stop a functional deviation from a planned operational status that could challenge equipment and functions. Some operational conditions, e.g. in-Vacuum Vessel (VV) radioactive inventories, will be controlled through procedures. Operating experience from present tokamaks, in particular JET, and from nuclear plants, is considered to the maximum possible extent. This paper presents the guidelines for the development of the ITER OLCs with particular reference to safety limits.

  7. Functional Limitations in Severe Haemophilia

    NARCIS (Netherlands)

    Genderen, F.R. van

    2006-01-01

    This thesis aims to describe the Disablement Process (DP) in Dutch adult patients with severe haemophilia, with specific focus on the domain of “Functional Limitations”. Four main questions underlie this thesis: How can Functional Limitations in severe haemophilia be investigated? Can the

  8. Limitations of existing web services

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. Limitations of existing web services. Uploading or downloading large data. Serving too many user from single source. Difficult to provide computer intensive job. Depend on internet and its bandwidth. Security of data in transition. Maintain confidentiality of data ...

  9. Historical Drawbacks of Limited Liability

    Directory of Open Access Journals (Sweden)

    Denis Boyle

    2016-07-01

    Full Text Available Limited liability is a human invention which has facilitated enormous economic growth around the world, particularly since the time of its general application in advanced countries during the nineteenth century. The individual legal identity of companies, coupled with the limited liability of their owners, has provided protection for investors from the risks associated with their investments. It has thus contributed to increase the sources of capital available to finance projects which might otherwise have been considered unviable. However, the legal protection offered to investors has negative consequences for other participants in economies. Speculation in stock markets often damages society. It is very important to study the drawbacks of limited liability and to suggest modifications to achieve a more stable, less volatile, economic growth in the world. Although this article goes to some lengths to recognise the work of authors who emphasise the positive historical economic contribution of limited lability, its main objective is to provoke a reflection around texts which point out the drawbacks and propose solutions.

  10. Environmental risk limits for zinc

    NARCIS (Netherlands)

    Bodar CWM; SEC

    2007-01-01

    Environmental Riks Limits (ERLs) were derived for zinc. ERLs serve as advisory values to set environmental quality standards in the Netherlands. The ERLs for zinc closely follow the outcomes of earlier discussions on zinc within the Water Framework Directive and EC Regulation 793/93. The ERLs

  11. Environmental risk limits for zinc

    NARCIS (Netherlands)

    Bodar CWM; SEC

    2007-01-01

    Environmental Riks Limits (ERLs) were derived for zinc. ERLs serve as advisory values to set environmental quality standards in the Netherlands. The ERLs for zinc closely follow the outcomes of earlier discussions on zinc within the Water Framework Directive and EC Regulation 793/93. The ERLs refer

  12. Landscape genetics and limiting factors

    Science.gov (United States)

    Samuel A. Cushman; Andrew J. Shirk; Erin L. Landguth

    2013-01-01

    Population connectivity is mediated by the movement of organisms or propagules through landscapes. However, little is known about how variation in the pattern of landscape mosaics affects the detectability of landscape genetic relationships. The goal of this paper is to explore the impacts of limiting factors on landscape genetic processes using simulation...

  13. Limits on light Higgs bosons

    International Nuclear Information System (INIS)

    Dawson, S.

    1988-01-01

    Experimental limits on light Higgs bosons (M/sub H/ < 5 GeV) are examined. Particular attention is paid to the process K → πH. It is shown that there may be an allowed window for light Higgs bosons between about 100 and 210 MeV. 13 refs., 2 figs

  14. The density limit in Tokamaks

    International Nuclear Information System (INIS)

    Alladio, F.

    1985-01-01

    A short summary of the present status of experimental observations, theoretical ideas and understanding of the density limit in tokamaks is presented. It is the result of the discussion that was held on this topic at the 4th European Tokamak Workshop in Copenhagen (December 4th to 6th, 1985). 610 refs

  15. Income trusts and limited partnerships

    International Nuclear Information System (INIS)

    Toews, E.L.

    1999-01-01

    This author provided a conceptual overview of income trusts and limited partnerships that are designed to pass operating cash flow directly to investors without the imposition of corporate taxes, discussed the evolution of the market, the mechanism used to price income funds, past and present performance of the sector, and made some predictions concerning the sector's future performance. 13 figs

  16. LIMITS OF THE EARTH BIOSPHERE

    Directory of Open Access Journals (Sweden)

    Karel KUDRNA

    2011-01-01

    Full Text Available Evaluation of the state of CO2 accumulation in the atmosphere demands knowledge on possibilities of the biosphere – its photosynthetizing apparatus, conditions and limits of absorption. A decisive precondition is to determine relation of CO2 accumulation by photosynthesis in dependence on the water balance, especially on its control quantity – transpiration, which is stabilized by supporting of underground waters.

  17. Thermal-hydraulic limitations on water-cooled limiters

    International Nuclear Information System (INIS)

    Cha, Y.S.; Misra, B.

    1984-08-01

    An assessment of the cooling requirements for fusion reactor components, such as the first wall and limiter/divertor, was carried out using pressurized water as the coolant. In order to establish the coolant operating conditions, a survey of the literature on departure from nucleate boiling, critical heat flux, asymmetrical heating and heat transfer augmentation techniques was carried out. The experimental data and the empirical correlations indicate that thermal protection for the fusion reactor components based on current design concepts can be provided with an adequate margin of safety without resorting to either high coolant velocities, excessive coolant pressures, or heat transfer augmentation techniques. If, however, the future designs require heat transfer enhancement techniques, experimental verification would be necessary since no data on heat transfer augmentation techniques exist for complex geometries, especially under asymmetrically heated conditions. Since the data presented herein concern primarily thermal protection, the final design should consider other factors such as thermal stresses, temperature limits, and fatigue

  18. Pushing the limits of NAA. Accuracy, uncertainty and detection limits

    International Nuclear Information System (INIS)

    Greenberg, R.R.

    2008-01-01

    This paper describes some highlights from the author's efforts to improve neutron activation analysis (NAA) detection limits through development and optimization of radiochemical separations, as well as to improve the overall accuracy of NAA measurements by identifying, quantifying and reducing measurement biases and uncertainties. Efforts to demonstrate the metrological basis of NAA, and to establish it as a 'Primary Method of Measurement' will be discussed. (author)

  19. Intoxicação em cães e gatos: diagnóstico toxicológico empregando cromatografia em camada delgada e cromatografia líquida de alta pressão com detecção ultravioleta em amostras estomacais Intoxication in dogs and cats: toxicological diagnosis using thin layer chromatography and high pressure liquid chromatography with ultraviolet detection in stomach samples

    Directory of Open Access Journals (Sweden)

    Rachel Picada Bulcão

    2010-05-01

    Full Text Available Agrotóxicos e raticidas são responsáveis por inúmeras intoxicações humanas e animais. Dados preliminares sugerem que o uso ilegal desses compostos com a finalidade de intoxicação fatal em pequenos animais é uma prática comum na região central do Estado do Rio Grande do Sul. O Laboratório de Toxicologia (LATOX recebe amostras de casos em que a principal suspeita é a intoxicação por agrotóxicos ou raticidas (lícitos e ilícitos. O presente estudo teve como objetivo apresentar um levantamento das intoxicações de pequenos animais, analisadas pelo LATOX no período de 2004 a 2008, sendo identificados os xenobióticos por meio de métodos analíticos otimizados pelo laboratório, incluindo screening por cromatografia em camada delgada (CCD e possível confirmação por cromatografia líquida de alta eficiência (CLAE-UV. No período, foram analisadas 68 amostras oriundas de intoxicações em cães e gatos. As amostras biológicas analisadas foram o estômago e o conteúdo estomacal, das quais a CCD permitiu a identificação de carbamatos, warfarina e estricnina. Esta mostrou ser uma técnica qualitativa eficiente e adequada para esse propósito, além de ser relativamente rápida, de baixo custo e de sofrer pouca interferência de componentes da matriz. Também foi realizado um screening toxicológico por CLAE-UV para os carbamatos n-metilados: aldicarb, carbaril, carbofuran e propoxur. O resultado das análises indicou que o principal agente tóxico encontrado foi o aldicarb (chumbinho, responsável por 39,7% das intoxicações (27 casos, seguido por estricnina (seis casos, warfarina (três casos e monofluoracetato de sódio (um caso. Sendo assim, o "chumbinho" foi o principal agente envolvido em intoxicações de cães e gatos na região central do Estado no período avaliado, e os métodos analíticos CCD e CLAE-UV podem ser utilizados de forma eficiente na rotina laboratorial para identificação e confirmação dos xenobi

  20. ITER Operating Limits and Conditions

    International Nuclear Information System (INIS)

    Ciattaglia, S.; Barabaschi, P.; Carretero, J.A.

    2006-01-01

    The Operating Limits and Conditions (OLCs) are operating parameters and conditions, chosen among all system/components, which together define the domain of the safe operation of ITER in all foreseen ITER status (operation, maintenance, commissioning). At the same time they are selected to guarantee the required operation flexibility which is a critical factor for the success of an experimental machine such as ITER. System and components important for personnel or public safety (Safety Important Class, SIC) are identified from the overall plant safety analysis on functional importance to safety of the components. SIC classification has to be presented already inside the preliminary safety analysis report and approved by the licensing safety authority before the relevant construction. OLCs comprise the safety limits, i.e. that if exceeded could result in a potential safety hazard, the relevant settings that determine the intervention of SIC systems and the operational limits on equipment which warn from or stop a functional departure from a planned operational status that could challenge equipment and functions. The safety limits have to indicate clearly states that leave the nominal safety state of ITER; they are derived from the safety analysis of ITER. OLCs can represent in some cases few parameters grouping together. Some operational conditions, e.g. inventories, will be controlled through no real time measurements and procedures. Operating experience from present tokamaks, in particular JET, and from nuclear plants is considered at the maximum possible extent. This paper presents the guidelines to develop the ITER OLCs with particular reference to safety limits. A few examples are reported as well as open issues on some OLCs control and measurement and the relevant R-and-D planned to solve the issues. (author)

  1. Classical Limit and Quantum Logic

    Science.gov (United States)

    Losada, Marcelo; Fortin, Sebastian; Holik, Federico

    2018-02-01

    The analysis of the classical limit of quantum mechanics usually focuses on the state of the system. The general idea is to explain the disappearance of the interference terms of quantum states appealing to the decoherence process induced by the environment. However, in these approaches it is not explained how the structure of quantum properties becomes classical. In this paper, we consider the classical limit from a different perspective. We consider the set of properties of a quantum system and we study the quantum-to-classical transition of its logical structure. The aim is to open the door to a new study based on dynamical logics, that is, logics that change over time. In particular, we appeal to the notion of hybrid logics to describe semiclassical systems. Moreover, we consider systems with many characteristic decoherence times, whose sublattices of properties become distributive at different times.

  2. Binary optics: Trends and limitations

    Science.gov (United States)

    Farn, Michael W.; Veldkamp, Wilfrid B.

    1993-01-01

    We describe the current state of binary optics, addressing both the technology and the industry (i.e., marketplace). With respect to the technology, the two dominant aspects are optical design methods and fabrication capabilities, with the optical design problem being limited by human innovation in the search for new applications and the fabrication issue being limited by the availability of resources required to improve fabrication capabilities. With respect to the industry, the current marketplace does not favor binary optics as a separate product line and so we expect that companies whose primary purpose is the production of binary optics will not represent the bulk of binary optics production. Rather, binary optics' more natural role is as an enabling technology - a technology which will directly result in a competitive advantage in a company's other business areas - and so we expect that the majority of binary optics will be produced for internal use.

  3. A Randomized Central Limit Theorem

    International Nuclear Information System (INIS)

    Eliazar, Iddo; Klafter, Joseph

    2010-01-01

    The Central Limit Theorem (CLT), one of the most elemental pillars of Probability Theory and Statistical Physics, asserts that: the universal probability law of large aggregates of independent and identically distributed random summands with zero mean and finite variance, scaled by the square root of the aggregate-size (√(n)), is Gaussian. The scaling scheme of the CLT is deterministic and uniform - scaling all aggregate-summands by the common and deterministic factor √(n). This Letter considers scaling schemes which are stochastic and non-uniform, and presents a 'Randomized Central Limit Theorem' (RCLT): we establish a class of random scaling schemes which yields universal probability laws of large aggregates of independent and identically distributed random summands. The RCLT universal probability laws, in turn, are the one-sided and the symmetric Levy laws.

  4. The quasi-abelian limit

    International Nuclear Information System (INIS)

    Fried, H.M.; Avan, J.

    2000-01-01

    A new, non-perturbative, eikonal method called the ''quasi abelian limit'' (QAL) is suggested for high energy quark (nucleon) scattering involving the exchange of all possible, non-interacting, non-abelian gluons (mesons). With this method, those functional integrals defining, e.g., the exchange of color coordinates in quark-quark scattering, are replaced by a finite number of quadratures over a subset of their coordinates. Mathematically, this procedure is not rigourous, because an unjustified interchange of limits has been performed; physically, it corresponds to the observation that the non-perturbative sum over all color-moment fluctuations can vanish at arbitrarily high energies. The QAL generates a result in agreement with a corrected, ''contiguity'' calculation, when the latter is summed over all perturbative orders. (orig.)

  5. Limitation and life in space

    Science.gov (United States)

    Israel, Marvin; Smith, T. Scott

    1986-08-01

    ``The Earth is the very quintescence of the human condition...,'' says Hannah Arendt. Georg Simmel writes: ``The stranger is by nature no `owner of soil'—soil not only in the physical, but also in the figurative sense of a life-substance which is fixed, if not in a point in space, at least in an ideal point of social environment.'' How will no longer being Earthbound affect persons' experience of themselves and of others? Space colonization offers an opportunity for new self-definition by the alteration of existing limits. Thus ``limitation'' is a useful concept for exploring the physical, social and psychological significance of the colonization of space. Will people seek the security of routine, of convention, of hierarchy as in the military model governing our present-day astronauts? or will they seek to maximize the freedom inherent in extraordinary living conditions—as bohemians, deviants, travelers?

  6. Limited taste discrimination in Drosophila.

    Science.gov (United States)

    Masek, Pavel; Scott, Kristin

    2010-08-17

    In the gustatory systems of mammals and flies, different populations of sensory cells recognize different taste modalities, such that there are cells that respond selectively to sugars and others to bitter compounds. This organization readily allows animals to distinguish compounds of different modalities but may limit the ability to distinguish compounds within one taste modality. Here, we developed a behavioral paradigm in Drosophila melanogaster to evaluate directly the tastes that a fly distinguishes. These studies reveal that flies do not discriminate among different sugars, or among different bitter compounds, based on chemical identity. Instead, flies show a limited ability to distinguish compounds within a modality based on intensity or palatability. Taste associative learning, similar to olfactory learning, requires the mushroom bodies, suggesting fundamental similarities in brain mechanisms underlying behavioral plasticity. Overall, these studies provide insight into the discriminative capacity of the Drosophila gustatory system and the modulation of taste behavior.

  7. Upper limit of peak area

    International Nuclear Information System (INIS)

    Helene, O.A.M.

    1982-08-01

    The determination of the upper limit of peak area in a multi-channel spectra, with a known significance level is discussed. This problem is specially important when the peak area is masked by the background statistical fluctuations. The problem is exactly solved and, thus, the results are valid in experiments with small number of events. The results are submitted to a Monte Carlo test and applied to the 92 Nb beta decay. (Author) [pt

  8. FAIR VALUE: UTILITY AND LIMITS

    OpenAIRE

    Valentin Gabriel Cristea

    2015-01-01

    This paper presents the utility and the limits of the fair value. We believe that any new product must be tried and tested before being imposed on the market and must be accepted by all potential users and those who will be affected, directly or indirectly and its advantages, disadvantages, risks, its cost must be predetermined and analyzed in a comprehensive and objective.We ask: Do financial statements at fair value meet users' expectations? The requirement to use fair value pricing mode...

  9. Limit laws for exponential families

    OpenAIRE

    Balkema, August A.; Klüppelberg, Claudia; Resnick, Sidney I.

    1999-01-01

    For a real random variable [math] with distribution function [math] , define ¶ [math] ¶ The distribution [math] generates a natural exponential family of distribution functions [math] , where ¶ [math] ¶ We study the asymptotic behaviour of the distribution functions [math] as [math] increases to [math] . If [math] then [math] pointwise on [math] . It may still be possible to obtain a non-degenerate weak limit law [math] by choosing suitable scaling and centring constants [math] an...

  10. On Uselessness of Limit Orders

    Czech Academy of Sciences Publication Activity Database

    Šmíd, Martin

    2007-01-01

    Roč. 2007, č. 24 (2007), s. 45-57 ISSN 1212-074X R&D Projects: GA ČR GD402/03/H057; GA ČR GA402/07/1113; GA ČR(CZ) GA402/06/1417 Institutional research plan: CEZ:AV0Z10750506 Keywords : market microstructure * limit order market * portfolio selection Subject RIV: AH - Economics

  11. Summary of Dissolved Concentration Limits

    International Nuclear Information System (INIS)

    Yueting Chen

    2001-01-01

    According to the Technical Work Plan titled Technical Work Plan for Waste Form Degradation Process Model Report for SR (CRWMS M and O 2000a), the purpose of this study is to perform abstractions on solubility limits of radioactive elements based on the process-level information and thermodynamic databases provided by Natural Environment Program Operations (NEPO) and Waste Package Operations (WPO). The scope of this analysis is to produce solubility limits as functions, distributions, or constants for all transported radioactive elements identified by the Performance Assessment Operations (PAO) radioisotope screening. Results from an expert elicitation for solubility limits of most radioactive elements were used in the previous Total System Performance Assessments (TSPAs). However, the elicitation conducted in 1993 does not meet the criteria set forth by the U.S. Nuclear Regulatory Commission (NRC) due to lack of documentation and traceability (Kotra et al. 1996, Section 3). Therefore, at the Waste Form Abstraction Workshop held on February 2-4, 1999, at Albuquerque, New Mexico, the Yucca Mountain Site Characterization Project (YMP) decided to develop geochemical models to study solubility for the proposed Monitored Geologic Repository. WPO/NEPO is to develop process-level solubility models, including review and compilation of relevant thermodynamic data. PAO's responsibility is to perform abstractions based on the process models and chemical conditions and to produce solubility distributions or response surfaces applicable to the proposed repository. The results of this analysis and conceptual model will feed the performance assessment for Total System Performance Assessment--Site Recommendation (TSPA-SR) and Total System Performance Assessment--License Application (TSPA-LA), and to the Waste Form Degradation Process Model Report section on concentration limits

  12. Problems of anthropogenic tritium limitation

    Directory of Open Access Journals (Sweden)

    Kochetkov О.A.

    2013-12-01

    Full Text Available This article contains the current situation in respect to the environmental concentrations of anthropogenic and natural tritium. There are presented and analyzed domestic standards for НТО of all Radiation Safety Standards (NRB, as well as the regulations analyzed for tritium in drinking water taken in other countries today. This article deals with the experience of limitation of tritium and focuses on the main problem of rationing of tritium — rationing of organically bound tritium.

  13. Summary of Dissolved Concentration Limits

    Energy Technology Data Exchange (ETDEWEB)

    Yueting Chen

    2001-06-11

    According to the Technical Work Plan titled Technical Work Plan for Waste Form Degradation Process Model Report for SR (CRWMS M&O 2000a), the purpose of this study is to perform abstractions on solubility limits of radioactive elements based on the process-level information and thermodynamic databases provided by Natural Environment Program Operations (NEPO) and Waste Package Operations (WPO). The scope of this analysis is to produce solubility limits as functions, distributions, or constants for all transported radioactive elements identified by the Performance Assessment Operations (PAO) radioisotope screening. Results from an expert elicitation for solubility limits of most radioactive elements were used in the previous Total System Performance Assessments (TSPAs). However, the elicitation conducted in 1993 does not meet the criteria set forth by the U.S. Nuclear Regulatory Commission (NRC) due to lack of documentation and traceability (Kotra et al. 1996, Section 3). Therefore, at the Waste Form Abstraction Workshop held on February 2-4, 1999, at Albuquerque, New Mexico, the Yucca Mountain Site Characterization Project (YMP) decided to develop geochemical models to study solubility for the proposed Monitored Geologic Repository. WPO/NEPO is to develop process-level solubility models, including review and compilation of relevant thermodynamic data. PAO's responsibility is to perform abstractions based on the process models and chemical conditions and to produce solubility distributions or response surfaces applicable to the proposed repository. The results of this analysis and conceptual model will feed the performance assessment for Total System Performance Assessment--Site Recommendation (TSPA-SR) and Total System Performance Assessment--License Application (TSPA-LA), and to the Waste Form Degradation Process Model Report section on concentration limits.

  14. Photon and graviton mass limits

    International Nuclear Information System (INIS)

    Goldhaber, Alfred Scharff; Nieto, Michael Martin

    2010-01-01

    Efforts to place limits on deviations from canonical formulations of electromagnetism and gravity have probed length scales increasing dramatically over time. Historically, these studies have passed through three stages: (1) testing the power in the inverse-square laws of Newton and Coulomb, (2) seeking a nonzero value for the rest mass of photon or graviton, and (3) considering more degrees of freedom, allowing mass while preserving explicit gauge or general-coordinate invariance. Since the previous review the lower limit on the photon Compton wavelength has improved by four orders of magnitude, to about one astronomical unit, and rapid current progress in astronomy makes further advance likely. For gravity there have been vigorous debates about even the concept of graviton rest mass. Meanwhile there are striking observations of astronomical motions that do not fit Einstein gravity with visible sources. ''Cold dark matter'' (slow, invisible classical particles) fits well at large scales. ''Modified Newtonian dynamics'' provides the best phenomenology at galactic scales. Satisfying this phenomenology is a requirement if dark matter, perhaps as invisible classical fields, could be correct here too. ''Dark energy''might be explained by a graviton-mass-like effect, with associated Compton wavelength comparable to the radius of the visible universe. Significant mass limits are summarized in a table.

  15. Application of fault current limiters

    Energy Technology Data Exchange (ETDEWEB)

    Neumann, A.

    2007-11-30

    This report presents the results of a study commissioned by the Department for Business, Enterprise and Industry (BERR; formerly the Department of Trade and Industry) into the application of fault current limiters in the UK. The study reviewed the current state of fault current limiter (FCL) technology and regulatory position in relation to all types of current limiters. It identified significant research and development work with respect to medium voltage FCLs and a move to high voltage. Appropriate FCL technologies being developed include: solid state breakers; superconducting FCLs (including superconducting transformers); magnetic FCLs; and active network controllers. Commercialisation of these products depends on successful field tests and experience, plus material development in the case of high temperature superconducting FCL technologies. The report describes FCL techniques, the current state of FCL technologies, practical applications and future outlook for FCL technologies, distribution fault level analysis and an outline methodology for assessing the materiality of the fault level problem. A roadmap is presented that provides an 'action agenda' to advance the fault level issues associated with low carbon networks.

  16. Impact-limiting materials characterization

    International Nuclear Information System (INIS)

    Glass, R.E.; Duffey, T.A.; McConnell, P.

    1993-01-01

    Three types of impact-limiting materials have been characterized which have applications in packages for the transport of radioactive materials. These materials are aluminum honeycombs, polyurethane foams, and aluminum foams. The results of the materials characterization have indicated strengths and weaknesses for each type of material. The polyurethane foams provide good impact limiting ability and excellent thermal insulation. However, they burn when subjected to the regulatory thermal event in the presence of air. The aluminum honeycombs provide excellent impact resistance in specific impact orientations. However, they provide relatively poor resistance to thermal assault. Finally, the aluminum foams exhibit relatively poor impact energy absorption capacities, significant variability in energy absorption, and limited thermal insulation. The development of the figures of merit examined the response of the materials to the impact event with the intent of maximizing the energy absorption of the materials with respect to either the volume or mass of the materials. Three figures of merit will be presented for the structural response. The figure of merit for the thermal event is based on minimizing the heat flux to the containment boundary. The paper presents a discussion of the test methods, a summary of the data and the figures of merit for each material. (J.P.N.)

  17. Limiting currents in superconducting composites

    International Nuclear Information System (INIS)

    Keilin, V.E.; Romanovskii, V.R.

    1992-01-01

    In this paper the results of numerical and analytical calculations of the process of current charging into a round superconducting composite with properties homogenized over cross-section are presented. In the numerical solution taken was into account a common proceeding of the thermal and electromagnetic processes. A wire with real volt-ampere characteristics approximated by exponential dependence was considered. The calculations carried out at various rates of current charging, voltampere characteristics, matrix materials, heat transfer coefficients and other parameters showed: the existence of characteristic limiting value of current below which the wire remains in a superconducting state if the current charging ceases and above which changes into a normal state; this current is somewhat less than a quench current; the existence of finite value for limiting current at any low heat transfer from a surface. The analytical solution of the problem is given. It permitted to write the stability criterion from which the dependence of limiting currents on initial parameters follows. The wire nonisothermality, its heat capacity, thermal and electric conductivities are taken into account additionally, as compared to results published earlier

  18. Photon and graviton mass limits

    Science.gov (United States)

    Goldhaber, Alfred Scharff; Nieto, Michael Martin

    2010-01-01

    Efforts to place limits on deviations from canonical formulations of electromagnetism and gravity have probed length scales increasing dramatically over time. Historically, these studies have passed through three stages: (1) testing the power in the inverse-square laws of Newton and Coulomb, (2) seeking a nonzero value for the rest mass of photon or graviton, and (3) considering more degrees of freedom, allowing mass while preserving explicit gauge or general-coordinate invariance. Since the previous review the lower limit on the photon Compton wavelength has improved by four orders of magnitude, to about one astronomical unit, and rapid current progress in astronomy makes further advance likely. For gravity there have been vigorous debates about even the concept of graviton rest mass. Meanwhile there are striking observations of astronomical motions that do not fit Einstein gravity with visible sources. “Cold dark matter” (slow, invisible classical particles) fits well at large scales. “Modified Newtonian dynamics” provides the best phenomenology at galactic scales. Satisfying this phenomenology is a requirement if dark matter, perhaps as invisible classical fields, could be correct here too. “Dark energy” might be explained by a graviton-mass-like effect, with associated Compton wavelength comparable to the radius of the visible universe. Significant mass limits are summarized in a table.

  19. Workshop on confidence limits. Proceedings

    International Nuclear Information System (INIS)

    James, F.; Lyons, L.; Perrin, Y.

    2000-01-01

    The First Workshop on Confidence Limits was held at CERN on 17-18 January 2000. It was devoted to the problem of setting confidence limits in difficult cases: number of observed events is small or zero, background is larger than signal, background not well known, and measurements near a physical boundary. Among the many examples in high-energy physics are searches for the Higgs, searches for neutrino oscillations, B s mixing, SUSY, compositeness, neutrino masses, and dark matter. Several different methods are on the market: the CL s methods used by the LEP Higgs searches; Bayesian methods; Feldman-Cousins and modifications thereof; empirical and combined methods. The Workshop generated considerable interest, and attendance was finally limited by the seating capacity of the CERN Council Chamber where all the sessions took place. These proceedings contain all the papers presented, as well as the full text of the discussions after each paper and of course the last session which was a discussion session. The list of participants and the 'required reading', which was expected to be part of the prior knowledge of all participants, are also included. (orig.)

  20. Waste tank characterization sampling limits

    International Nuclear Information System (INIS)

    Tusler, L.A.

    1994-01-01

    This document is a result of the Plant Implementation Team Investigation into delayed reporting of the exotherm in Tank 241-T-111 waste samples. The corrective actions identified are to have immediate notification of appropriate Tank Farm Operations Shift Management if analyses with potential safety impact exceed established levels. A procedure, WHC-IP-0842 Section 12.18, ''TWRS Approved Sampling and Data Analysis by Designated Laboratories'' (WHC 1994), has been established to require all tank waste sampling (including core, auger and supernate) and tank vapor samples be performed using this document. This document establishes levels for specified analysis that require notification of the appropriate shift manager. The following categories provide numerical values for analysis that may indicate that a tank is either outside the operating specification or should be evaluated for inclusion on a Watch List. The information given is intended to translate an operating limit such as heat load, expressed in Btu/hour, to an analysis related limit, in this case cesium-137 and strontium-90 concentrations. By using the values provided as safety flags, the analytical laboratory personnel can notify a shift manager that a tank is in potential violation of an operating limit or that a tank should be considered for inclusion on a Watch List. The shift manager can then take appropriate interim measures until a final determination is made by engineering personnel

  1. Limits to the growth debate

    Energy Technology Data Exchange (ETDEWEB)

    Gordon, L.

    The first two major studies sponsored by the club of Rome were the report of the Meadows team at MIT, The Limits to Growth, published in 1972, and the Mesarovic and Pestel report, Mankind at the Turning Point, published in 1974. When the Club of Rome met in Philadelphia in April of 1976, its pronouncements reflected a frame of mind quite different from that of 1972. Recently, Herman Kahn and his colleagues at the Hudson Institute have published The Next 200 Years, a book evidently inspired as much by antagonism to the limits-to-growth school of thought as by affirmative faith in its own vision of technological optimism. The author discusses the content of the studies and summarizes his own position in four areas. (1) While no trend of growth of anything can continue indefinitely in the real world, there are not global physical limits to economic growth within a time frame susceptible to plausible foresight or relevant to policy making. (2) In some world regions, notably South Asia and tropical Africa, population growth rates do indeed threaten to create a kind of Malthusian trap, and the rapid reduction of fertility is critically important to their development prospects and urgent in time. (3) For other parts of the world, both rates and directions of growth will be more influenced by changes in preferences for consumption and in attitudes toward production than by physical constraints, although higher energy costs and environmental pressures will also be important influences in generating such changes in growth patterns. (4) Probable changes in directions of growth will generate new and important issues in international economic and political relations, with both dangers and opportunities for the evolving world order. (MCW)

  2. Casimir effect: The classical limit

    International Nuclear Information System (INIS)

    Feinberg, J.; Mann, A.; Revzen, M.

    2001-01-01

    We analyze the high temperature (or classical) limit of the Casimir effect. A useful quantity which arises naturally in our discussion is the 'relative Casimir energy', which we define for a configuration of disjoint conducting boundaries of arbitrary shapes, as the difference of Casimir energies between the given configuration and a configuration with the same boundaries infinitely far apart. Using path integration techniques, we show that the relative Casimir energy vanishes exponentially fast in temperature. This is consistent with a simple physical argument based on Kirchhoff's law. As a result the 'relative Casimir entropy', which we define in an obviously analogous manner, tends, in the classical limit, to a finite asymptotic value which depends only on the geometry of the boundaries. Thus the Casimir force between disjoint pieces of the boundary, in the classical limit, is entropy driven and is governed by a dimensionless number characterizing the geometry of the cavity. Contributions to the Casimir thermodynamical quantities due to each individual connected component of the boundary exhibit logarithmic deviations in temperature from the behavior just described. These logarithmic deviations seem to arise due to our difficulty to separate the Casimir energy (and the other thermodynamical quantities) from the 'electromagnetic' self-energy of each of the connected components of the boundary in a well defined manner. Our approach to the Casimir effect is not to impose sharp boundary conditions on the fluctuating field, but rather take into consideration its interaction with the plasma of 'charge carriers' in the boundary, with the plasma frequency playing the role of a physical UV cutoff. This also allows us to analyze deviations from a perfect conductor behavior

  3. (Plant growth with limited water)

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-01

    The work supported by DOE in the last year built on our earlier findings that stem growth in soybean subjected to limited water is inhibited first by a physical limitation followed in a few hours by metabolic changes that reduce the extensibility of the cell walls. With time, there is modest recovery in extensibility and a 28kD protein accumulates in the walls of the growth-affected cells. A 31kD protein that was 80% similar in amino acid sequence also was present but did not accumulate in the walls of the stem cells. Explorations of the mRNA for these proteins showed that the mRNA for the 28kD protein increased in the shoot in response to water deprivation but the mRNA for the 31kD protein did not accumulate. In contrast, the roots continued to grow and the mRNA for the 31kD protein accumulated but the mRNA for the 28kD protein was undetectable. We also explored how growth occurs in the absence of an external water supply. We found that, under these conditions, internal water is mobilized from surrounding nongrowing or slowly growing tissues and is used by rapidly growing cells. We showed that a low water potential is normally present in the enlarging tissues and is the likely force that extracts water from the surrounding tissues. We found that it involved a gradient in water potential that extended from the xylem to the outlying cells in the enlarging region and was not observed in the slowly growing basal tissue of the stems of the same plant. The gradient was measured directly with single cell determinations of turgor and osmotic potential in intact plants. The gradient may explain instances of growth inhibition with limited water when there is no change in the turgor of the enlarging cells. 17 refs.

  4. Moral Limits of the Market

    DEFF Research Database (Denmark)

    Ooi, Can-Seng

    2017-01-01

    that the current pragmatic solutions to sustainable tourism development could not resolve issues of authenticity, equity, rights and fairness. There are three in-built moral limits in the tourism market, and namely: the market assumes it can price everything including culture and nature; the market distributes......Scholars and the practice community unanimously advocate sustainable balanced and sensitive tourism development. Engaging with locals and setting up public-private partnerships are frequently championed. This working paper introduces a set of lenses in the moral philosophy tradition and argues...

  5. FAIR VALUE: UTILITY AND LIMITS

    Directory of Open Access Journals (Sweden)

    Valentin Gabriel Cristea

    2015-05-01

    Full Text Available This paper presents the utility and the limits of the fair value. We believe that any new product must be tried and tested before being imposed on the market and must be accepted by all potential users and those who will be affected, directly or indirectly and its advantages, disadvantages, risks, its cost must be predetermined and analyzed in a comprehensive and objective.We ask: Do financial statements at fair value meet users' expectations? The requirement to use fair value pricing model that was carrying was not accompanied by a parallel examination of its impact on the presentation of accounts.

  6. CSS3 pushing the limits

    CERN Document Server

    Greig, Stephen

    2013-01-01

    Push CSS3 and your design skills to the limit-and beyond! Representing an evolutionary leap forward for CSS, CSS3 is chock-full of new capabilities that dramatically expand the boundaries of what a styling language can do. But many of those new features remain undocumented, making it difficult to learn what they are and how to use them to create the sophisticated sites and web apps clients demand and users have grown to expect. Until now. This book introduces you to all of CSS3's new and advanced features, and, with the help of dozens of real-world examples and live

  7. Nanofabrication principles, capabilities and limits

    CERN Document Server

    Cui, Zheng

    2017-01-01

    This second edition of Nanofabrication is one of the most comprehensive introductions on nanofabrication technologies and processes. A practical guide and reference, this book introduces readers to all of the developed technologies that are capable of making structures below 100nm. The principle of each technology is introduced and illustrated with minimum mathematics involved. Also analyzed are the capabilities of each technology in making sub-100nm structures, and the limits of preventing a technology from going further down the dimensional scale. This book provides readers with a toolkit that will help with any of their nanofabrication challenges.

  8. challenges, limitations and technical innovations

    OpenAIRE

    Fallenberg, Eva Maria

    2015-01-01

    The oldest technique dedicated to breast-cancer diagnosis, x-ray mammography, has considerable limitations in patients with dense breast tissue. Therefore it is a central focus of current research on breast cancer to increase the contrast between tissue and tumor, primarily with the use of contrast-agents. The main goal of this body of work was to compare modern ionic and non-ionic macrocyclic gadolinium-containing contrast-agents when used for breast MRI and to research the applicabili...

  9. Interstellar scattering and resolution limitations

    International Nuclear Information System (INIS)

    Dennison, B.

    1987-01-01

    Density irregularities in both the interplanetary medium and the ionized component of the interstellar medium scatter radio waves, resulting in limitations on the achievable resolution. Interplanetary scattering (IPS) is weak for most observational situations, and in principle the resulting phase corruption can be corrected for when observing with sufficiently many array elements. Interstellar scattering (ISS), on the other hand, is usually strong at frequencies below about 8 GHz, in which case intrinsic structure information over a range of angular scales is irretrievably lost. With the earth-space baselines now planned, it will be possible to search directly for interstellar refraction, which is suspected of modulating the fluxes of background sources. 14 references

  10. The philosophy of dose limitation

    International Nuclear Information System (INIS)

    Recht, P.

    1981-01-01

    The evolution of concepts and terms appearing in the European Rules of 15 July 1980 is briefly described. After a period where ''tolerance doses'' represent definite limits which should be respected, appears the concept of a ''as low as possible'' and ''as low as practicable'' level. The hypothesis that any exposure represents a risk which should be avoided is taken into account in the later evolution. As a consequence one has to examine the advantages and disadvantages in other words to make a cost-benefit analysis. This evolution leads to the concepts of justification and optimization used at the present time. (author)

  11. Dose limits cause unacceptable risk

    International Nuclear Information System (INIS)

    Collier, Sylvia.

    1985-01-01

    This paper on radiation dose limits for workers and the public discusses the following: Medical Research Council report; safety standards; risk assessment; deaths from cancers; biological radiation effects; UK legislation; low-level radiation; public concern; UKAEA staff survey; Ionising Radiations Regulations; United Nations Scientific Committee on Effects of Atomic Radiation; US studies on work force in nuclear establishments; problems of extrapolation; Japanese data from Hiroshima and Nagasaki; International Commission on Radiological Protection recommendations; studies on uranium miners; UK Health and Safety Executive; UK National Radiological Protection Board. (U.K.)

  12. LIMITED RESTAURANT SERVICE: EASTER WEEKEND

    CERN Multimedia

    2003-01-01

    As Friday, April 18 and Monday, April 21, 2003 are CERN holidays, restaurants no. 1 (COOP : Bldg. 501- Meyrin) and no. 3 (AVENANCE : Bldg. 866 - Prévessin) will be closed and will remain so on Saturday and Sunday, April 19 - 20. They will reopen on Tuesday, April 22 at 7h00. During these four days, a limited service will be provided by restaurant no. 2 (DSR : Bldg. 504 - Meyrin) from 8h00 to 21h00 with hot meals served from 11h30 to 14h00 and from 18h00 to 19h30.

  13. Food irradiation, profits and limitations

    International Nuclear Information System (INIS)

    Luna C, P.C.

    1992-05-01

    The utility of the irradiation to overcome diverse problems of lost nutritious, it has been demonstrated in multiple investigation works, that its have confirmed the value and the inoculation of the irradiated foods. The quantity of energy applied to each food, is in function of the wanted effect. In this document a guide with respect to the practical application and the utility of the irradiation process in different foods, as well as the suggested dose average is shown. Among the limitations of the use of this technology, its are the costs and not being able to apply it to some fresh foods. (Author)

  14. Limitations of shallow nets approximation.

    Science.gov (United States)

    Lin, Shao-Bo

    2017-10-01

    In this paper, we aim at analyzing the approximation abilities of shallow networks in reproducing kernel Hilbert spaces (RKHSs). We prove that there is a probability measure such that the achievable lower bound for approximating by shallow nets can be realized for all functions in balls of reproducing kernel Hilbert space with high probability, which is different with the classical minimax approximation error estimates. This result together with the existing approximation results for deep nets shows the limitations for shallow nets and provides a theoretical explanation on why deep nets perform better than shallow nets. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Oiticica: limites de uma experiência limite

    OpenAIRE

    Sara Cristiane Jara Grubert

    2006-01-01

    Este trabalho trata da trajetória artística de Hélio Oiticica, que se empenhou em entender e reformular o perfil do artista, seu lugar e papel na sociedade. Foi esse processo metódico e constante de experimentação e reflexão que o levou a expandir os limites dos suportes artísticos tradicionais, especialmente a partir de meados da década de 60. É realçada a importância da formação de Hélio Oiticica no Museu de Arte Moderna do Rio de Janeiro para sua atuação posterior, aberta ao diálogo com um...

  16. The Limited Test Ban Treaty

    International Nuclear Information System (INIS)

    Loeb, B.S.

    1991-01-01

    This paper discusses the Limited Test Ban Treaty which came at the end of nearly five years of frustrated efforts to obtain a comprehensive test ban. Negotiations toward that end had begun in October 1958. At the same time a voluntary, informal moratorium on tests was initiated. The negotiations soon stalled over the Soviet Union's resistance to internationally supervised inspections on its soil. In April 1959 a phased ban that was to be limited at first to atmospheric tests conducted below an altitude of 50 kilometers. Such tests were thought to be easily verifiable. The Soviets rejected this idea and continued to insist that a complete test ban need not require numerous inspections. The two sides nevertheless appeared to be nearing agreement on a treaty to ban all but relatively small underground tests when, in May 1960, an U.S. U-2 reconnaissance plane was shot down over Soviet territory. After a thorough review of the U.S. position, the Kennedy administration proposed in April 1961 a draft treaty that made several concessions toward the Soviet position. Nevertheless, the Soviets, still disagreeing with the provisions for verification and with the makeup of the control organization, rejected it

  17. Hamiltonian mechanics limits microscopic engines

    Science.gov (United States)

    Anglin, James; Gilz, Lukas; Thesing, Eike

    2015-05-01

    We propose a definition of fully microscopic engines (micro-engines) in terms of pure mechanics, without reference to thermodynamics, equilibrium, or cycles imposed by external control, and without invoking ergodic theory. This definition is pragmatically based on the observation that what makes engines useful is energy transport across a large ratio of dynamical time scales. We then prove that classical and quantum mechanics set non-trivial limits-of different kinds-on how much of the energy that a micro-engine extracts from its fuel can be converted into work. Our results are not merely formal; they imply manageable design constraints on micro-engines. They also suggest the novel possibility that thermodynamics does not emerge from mechanics in macroscopic regimes, but rather represents the macroscopic limit of a generalized theory, valid on all scales, which governs the important phenomenon of energy transport across large time scale ratios. We propose experimental realizations of the dynamical mechanisms we identify, with trapped ions and in Bose-Einstein condensates (``motorized bright solitons'').

  18. Compliance with public dose limits

    International Nuclear Information System (INIS)

    Mason, G.C.

    1991-01-01

    Radiation, in various forms, is ubiquitous in the environment. Natural background radiation leads to an average radiation exposure for the general population of about 2 mSv per year. The mining and milling of radioactive ores - uranium and mineral sands - may cause a small increase in radiation exposure for some members of the public. Because any such increment in exposure is small compared with a natural exposure that is variable and difficult to quantify accurately, it is not easy to determine what proportion of the total dose received by a member of the public can be attributed to mining and milling activities. Consequently, because public dose limits apply and to those doses caused by human activity, such as mining and milling, the task of demonstrating compliance can be hampered by uncertainty. Some strategies for handling this situation are discussed. While the discussion concentrates on public dose limits, much of it may also be applicable, or adaptable, to occupational exposure. 4 refs., 2 figs

  19. [Limitation of the therapeutic effort].

    Science.gov (United States)

    Herreros, B; Palacios, G; Pacho, E

    2012-03-01

    The limitation of the therapeutic effort (LTE) consists in not applying extraordinary or disproportionate measures for therapeutic purposes that are proposed for a patient with poor life prognosis and/or poor quality of life. There are two types. The first is to not initiate certain measures or to withdraw them when they are established. A decision of the LTE should be based on some rigorous criteria, so that we make the following proposal. First, it is necessary to know the most relevant details of the case to make a decision: the preferences of the patient, the preferences of the family when pertinent, the prognosis (severity), the quality of life and distribution of the limited resources. After, the decision should be made. In this phase, participatory deliberation should be established to clarify the end of the intervention. Finally, if it is decided to perform an LTE, it should be decided how to do it. Special procedures, disproportionate measures, that are useless and vain should not be initiated for the therapeutic objective designed (withdraw them if they have been established). When it has been decided to treat a condition (interim measures), the treatment should be maintained. This complex phase may need stratification of he measures. Finally, the necessary palliative measures should be established. Copyright © 2011 Elsevier España, S.L. All rights reserved.

  20. Peptidomics for Studying Limited Proteolysis.

    Science.gov (United States)

    Tsuchiya, Takashi; Osaki, Tsukasa; Minamino, Naoto; Sasaki, Kazuki

    2015-11-06

    Limited proteolysis is a pivotal mechanism regulating protein functions. Identifying physiologically or pathophysiologically relevant cleavage sites helps to develop molecular tools that can be used for diagnostics or therapeutics. During proteolysis of secretory and membrane proteins, part of the cleaved protein is liberated and destined to undergo degradation but should retain original cleavage sites created by proteolytic enzymes. We profiled endogenous peptides accumulated for 4 h in media conditioned by primary cultured rat cardiac fibroblasts. A total of 3916 redundant peptide sequences from 94 secretory proteins and membrane proteins served to identify limited cleavage sites, both annotated and unannotated, for signal peptide or propeptide removal, peptide hormone processing, ectodomain shedding, and regulated intramembrane proteolysis. Incorrectly predicted signal cleavage sites are found in typical proteins such as extracellular matrix proteins and the peptide hormone precursor adrenomedullin ADM. The revealed signal peptide cleavage site for ADM was experimentally verified by identifying the major molecular form of flanking proadrenomedullin N-terminal peptide. We suggest that profiling of endogenous peptides, like transcriptome sequence reads, makes sense in regular cells such as fibroblasts and that peptidomics provides insight into proteolysis-regulated protein functions.

  1. Be-limiter experiment on ISX

    International Nuclear Information System (INIS)

    Mioduszewski, P.K.

    1984-01-01

    The relevance of this experiment to the JET experiment is described. Data on the following issues are given: (1) thermo-mechanical properties of the Be-limiter; (2) particle flow to limiter; (3) heat flow to the limiter; (4) limiter-plasma-wall interaction; (5) plasma properties/operation; (6) active control of plasma-limiter operation; and (7) fault conditions

  2. Controlling percolation with limited resources

    Science.gov (United States)

    Schröder, Malte; Araújo, Nuno A. M.; Sornette, Didier; Nagler, Jan

    2017-12-01

    Connectivity, or the lack thereof, is crucial for the function of many man-made systems, from financial and economic networks over epidemic spreading in social networks to technical infrastructure. Often, connections are deliberately established or removed to induce, maintain, or destroy global connectivity. Thus, there has been a great interest in understanding how to control percolation, the transition to large-scale connectivity. Previous work, however, studied control strategies assuming unlimited resources. Here, we depart from this unrealistic assumption and consider the effect of limited resources on the effectiveness of control. We show that, even for scarce resources, percolation can be controlled with an efficient intervention strategy. We derive such an efficient strategy and study its implications, revealing a discontinuous transition as an unintended side effect of optimal control.

  3. Pericytes limit tumor cell metastasis

    DEFF Research Database (Denmark)

    Xian, Xiaojie; Håkansson, Joakim; Ståhlberg, Anders

    2006-01-01

    Previously we observed that neural cell adhesion molecule (NCAM) deficiency in beta tumor cells facilitates metastasis into distant organs and local lymph nodes. Here, we show that NCAM-deficient beta cell tumors grew leaky blood vessels with perturbed pericyte-endothelial cell-cell interactions...... the microvessel wall. To directly address whether pericyte dysfunction increases the metastatic potential of solid tumors, we studied beta cell tumorigenesis in primary pericyte-deficient Pdgfb(ret/ret) mice. This resulted in beta tumor cell metastases in distant organs and local lymph nodes, demonstrating a role...... and deficient perivascular deposition of ECM components. Conversely, tumor cell expression of NCAM in a fibrosarcoma model (T241) improved pericyte recruitment and increased perivascular deposition of ECM molecules. Together, these findings suggest that NCAM may limit tumor cell metastasis by stabilizing...

  4. Sodium nitrate combustion limit tests

    International Nuclear Information System (INIS)

    Beitel, G.A.

    1976-04-01

    Sodium nitrate is a powerful solid oxidant. Energetically, it is capable of exothermically oxidizing almost any organic material. Rate-controlling variables such as temperature, concentration of oxidant, concentration of fuel, thermal conductivity, moisture content, size, and pressure severely limit the possibility of a self-supported exothermic reaction (combustion). The tests reported in this document were conducted on one-gram samples at atmospheric pressure. Below 380 0 C, NaNO 3 was stable and did not support combustion. At moisture concentrations above 22 wt percent, exothermic reactions did not propagate in even the most energetic and reactive compositions. Fresh resin and paraffin were too volatile to enable a NaNO 2 -supported combustion process to propagate. Concentrations of NaNO 3 above 95 wt percent or below 35 wt percent did not react with enough energy release to support combustion. The influence of sample size and confining pressure, both important factors, was not investigated in this study

  5. Mathematical methods for hydrodynamic limits

    CERN Document Server

    Masi, Anna

    1991-01-01

    Entropy inequalities, correlation functions, couplings between stochastic processes are powerful techniques which have been extensively used to give arigorous foundation to the theory of complex, many component systems and to its many applications in a variety of fields as physics, biology, population dynamics, economics, ... The purpose of the book is to make theseand other mathematical methods accessible to readers with a limited background in probability and physics by examining in detail a few models where the techniques emerge clearly, while extra difficulties arekept to a minimum. Lanford's method and its extension to the hierarchy of equations for the truncated correlation functions, the v-functions, are presented and applied to prove the validity of macroscopic equations forstochastic particle systems which are perturbations of the independent and of the symmetric simple exclusion processes. Entropy inequalities are discussed in the frame of the Guo-Papanicolaou-Varadhan technique and of theKipnis-Oll...

  6. Electroweak bubble wall speed limit

    Energy Technology Data Exchange (ETDEWEB)

    Bödeker, Dietrich [Fakultät für Physik, Universität Bielefeld, 33501 Bielefeld (Germany); Moore, Guy D., E-mail: bodeker@physik.uni-bielefeld.de, E-mail: guymoore@ikp.physik.tu-darmstadt.de [Institut für Kernphysik, Technische Universität Darmstadt, Schlossgartenstraße 2, 64289 Darmstadt (Germany)

    2017-05-01

    In extensions of the Standard Model with extra scalars, the electroweak phase transition can be very strong, and the bubble walls can be highly relativistic. We revisit our previous argument that electroweak bubble walls can 'run away,' that is, achieve extreme ultrarelativistic velocities γ ∼ 10{sup 14}. We show that, when particles cross the bubble wall, they can emit transition radiation. Wall-frame soft processes, though suppressed by a power of the coupling α, have a significance enhanced by the γ-factor of the wall, limiting wall velocities to γ ∼ 1/α. Though the bubble walls can move at almost the speed of light, they carry an infinitesimal share of the plasma's energy.

  7. LIMITED RESTAURANT SERVICE : EASTER WEEKEND

    CERN Multimedia

    Restaurant Supervisory Committee

    2002-01-01

    As Friday 29 March and Monday 1st April 2002 are CERN holidays, restaurants no. 1 (COOP, bldg. 501- Meyrin) and no. 3 (Avenance, bldg. 866 - Prévessin) will be closed and will remain so on Saturday and Sunday 30-31 March. They will reopen on Tuesday 2 April at 7h00. During these four days, a limited service will be provided by restaurant no. 2 (DSR, bldg. 504 - Meyrin) from 8h00 to 21h00 with hot meals served from 11h30 to 14h00 and from 18h00 to 19h30. On Thursday 28 March, all three restaurants will operate according to the usual times except for restaurant no. 1 which will close at 21h00 instead of 1 o'clock in the morning. Restaurant Supervisory Committee Tel. 77551

  8. LIMITED RESTAURANT SERVICE : EASTER WEEKEND

    CERN Multimedia

    2003-01-01

    As Friday, April 18 and Monday, April 21, 2003 are CERN holidays, restaurants no. 1 (COOP : Bldg. 501- Meyrin) and no. 3 (AVENANCE : Bldg. 866 - Prévessin) will be closed and will remain so on Saturday and Sunday, April 19 - 20. They will reopen on Tuesday, April 22 at 7h00. During these four days, a limited service will be provided by restaurant no. 2 (DSR : Bldg. 504 - Meyrin) from 8h00 to 21h00 with hot meals served from 11h30 to 14h00 and from 18h00 to 19h30. On Thursday, April 17, all three restaurants will operate according to the usual times except for restaurant no. 1 which will close at 21h00 instead of 1 o'clock in the morning.

  9. LIMITED RESTAURANT SERVICE: EASTER WEEKEND

    CERN Multimedia

    Restaurant Supervisory Committee

    2001-01-01

    As Friday 13 and Monday 16 April 2001 are CERN holidays, restaurants no. 1 (COOP, bldg. 501- Meyrin) and no. 3 (Générale de Restauration, bldg. 866 - Prévessin) will be closed and will remain so on Saturday 14 and Sunday 15 April. They will reopen on Tuesday 17 April at 7h00. During these four days, a limited service will be provided by restaurant no. 2 (DSR, bldg. 504 - Meyrin) from 8h00 to 21h00 with hot meals served from 11h30 to 14h00 and from 18h00 to 19h30. On Thursday 12 April, all three restaurants will operate according to the usual times except for restaurant no 1, which will close at 21h00 instead of 1 o'clock in the morning.

  10. LIMITED RESTAURANT SERVICE : EASTER WEEKEND

    CERN Multimedia

    Restaurant Supervisory Committee

    2002-01-01

    As Friday, March 29 and Monday, April 1st, 2002 are CERN holidays, restaurants no. 1 (COOP : Bldg. 501- Meyrin) and no. 3 (Avenance : Bldg. 866 - Prévessin) will be closed and will remain so on Saturday and Sunday, March 30 - 31. They will reopen on Tuesday, April 2 at 7h00. During these four days, a limited service will be provided by restaurant no. 2 (DSR : Bldg. 504 - Meyrin) from 8h00 to 21h00 with hot meals served from 11h30 to 14h00 and from 18h00 to 19h30. On Thursday, March 28, all three restaurants will operate according to the usual times except for restaurant no. 1 which will close at 21h00 instead of 1 o'clock in the morning.   Restaurant Supervisory Committee, tel. 77551

  11. Material selection for TFTR limiters

    International Nuclear Information System (INIS)

    Ulrickson, M.

    1980-10-01

    The requirements for the material to be used as the first surface of limiters in TFTR are that it: (1) withstand a heat flux of 1 kw/cm 2 for a pulse length of 1.5s and a duty cycle of 1/200 for 10 5 cycles, (2) withstand the thermal and electro-magnetic loads from 10 4 plasma current disruptions lasting about 200 μs, (3) generate impurities at a rate low enough to meet impurity control requirements (which depend on the atomic number of the material) for TFTR, and (4) have tritium retention characteristics consistent with tritium inventory requirements for TFTR. An extensive set of material tests using electron beams, neutral beams, and plasma bombardment have been carried out to identify materials which can meet the thermal requirements of the above

  12. Limits to power system growth

    International Nuclear Information System (INIS)

    Slater, S.M.; Klein, A.C.; Webb, B.J.; Pauley, K.A.

    1993-01-01

    In the design of space nuclear power systems a variety of conversion techniques may be used, each with its own advantages and disadvantages. A study was performed which analyzed over 120 proposed system designs. The designs were compared to identify the optimum conversion system as a function of power level and find limits to specific mass (kg/kWe) for each power cycle. Furthermore, the component masses were studied to determine which component of the overall design contributes the most to total system mass over a variety of power levels. The results can provide a focus for future research efforts by selecting the best conversion technology for the desired power range, and optimizing the system component which contributes most to the total mass

  13. Prostatic carcinoma: limited field irradiation

    International Nuclear Information System (INIS)

    Rounsaville, M.C.; Green, J.P.; Vaeth, J.M.; Purdon, R.P.; Heltzel, M.M.

    1987-01-01

    This is a retrospective study of 251 patients with histologically proven adenocarcinoma treated primarily with limited field radiotherapy techniques, under the principle direction of authors JMV and JPG, between 1968 and 1981 in San Francisco, California. All patients are followed for a minimum of 3 years; mean follow-up is 7.3 years. Routine clinical staging procedures included: HandP, digital prostate exam, cystoscopy, biopsy, blood studies including serum acid phosphatase, and imaging studies including chest X ray, IVP, bone survey or radionucleotide bone scan, and in recent years, pelvic CT scans. Twelve patients are Stage A1, 37-Stage A2, 50-Stage B, 140-Stage C1 and 12-Stage C2. Ninety percent of all cases and 85% of Stage C patients were treated with limited fields to the prostate and periprostatic volume only. Total doses were prescribed at midplane or isocenter and were generally 6500-7000 cGy, daily doses of 180-200 cGy, 5 days per week. Actuarial 5- and 10-year survival rates are: entire population-69% and 47%; Stage A1-74% and 50%; Stage A2-81% and 67%; Stage B-84% and 53%; Stage C1-63% and 42%; Stage C2-32% and 11%. The 5- and 10-year disease-free actuarial survivals are: entire population-71% and 50%; Stage A1-89% and 74%; Stage A2-82% and 69%; Stage B-71% and 52%; Stage C1-67% and 44%; Stage C2-0%. Sites of recurrence, alone or as a component of the failure pattern are: 37 (15%) local, 11 (4%) symptomatic regional recurrence (lower extremity edema, pelvic pain/sciatica, hydroureteronephrosis), and 87 (35%) distant metastasis. Seven (3%) had unknown sites of failure. Local-regional failure occurred in 42% of Stage C2 patients

  14. Do professional boundaries limit trust?

    Science.gov (United States)

    Smythe, Elizabeth; Hennessy, Julia; Abbott, Max; Hughes, Frances

    2018-02-01

    The present study uses stories of mental health support workers talking about their relationship with clients to wonder about how trust might be limited by the professional boundaries of nursing. The writing arose out of an appreciative inquiry study looking at the role of mental health support workers. Participants talked about how they worked with their clients. As researchers, we were struck by the depth of trust that was built between worker and client. We have brought a phenomenological lens to wonder about the nature of trust, as shown in the data. The original research sought to identify what was working well for mental health support workers. The present study brings a phenomenological interpretive approach to four stories from the discovery phase of the study, with our thinking informed by Heidegger and van Manen. Interviews were conducted with 26 mental health support workers and six stakeholders in 2012-2103. For this paper, we drew from those transcripts stories of three mental health support workers and one stakeholder. Through a process of talking together, writing, and rewriting, we wondered about the meaning within these stories, with a strong focus on how trust was enacted. We saw that mental health support workers in this study, by not carrying the boundaries of being 'professional', seemed free to grow a stronger relationship of trust which was therapeutic. We ask: Is it time to rethink how professional boundaries limit the level of trust achieved with clients to the detriment of impactful care? © 2017 Australian College of Mental Health Nurses Inc.

  15. Prospective Optimization with Limited Resources.

    Science.gov (United States)

    Snider, Joseph; Lee, Dongpyo; Poizner, Howard; Gepshtein, Sergei

    2015-09-01

    The future is uncertain because some forthcoming events are unpredictable and also because our ability to foresee the myriad consequences of our own actions is limited. Here we studied how humans select actions under such extrinsic and intrinsic uncertainty, in view of an exponentially expanding number of prospects on a branching multivalued visual stimulus. A triangular grid of disks of different sizes scrolled down a touchscreen at a variable speed. The larger disks represented larger rewards. The task was to maximize the cumulative reward by touching one disk at a time in a rapid sequence, forming an upward path across the grid, while every step along the path constrained the part of the grid accessible in the future. This task captured some of the complexity of natural behavior in the risky and dynamic world, where ongoing decisions alter the landscape of future rewards. By comparing human behavior with behavior of ideal actors, we identified the strategies used by humans in terms of how far into the future they looked (their "depth of computation") and how often they attempted to incorporate new information about the future rewards (their "recalculation period"). We found that, for a given task difficulty, humans traded off their depth of computation for the recalculation period. The form of this tradeoff was consistent with a complete, brute-force exploration of all possible paths up to a resource-limited finite depth. A step-by-step analysis of the human behavior revealed that participants took into account very fine distinctions between the future rewards and that they abstained from some simple heuristics in assessment of the alternative paths, such as seeking only the largest disks or avoiding the smaller disks. The participants preferred to reduce their depth of computation or increase the recalculation period rather than sacrifice the precision of computation.

  16. Prospective Optimization with Limited Resources.

    Directory of Open Access Journals (Sweden)

    Joseph Snider

    2015-09-01

    Full Text Available The future is uncertain because some forthcoming events are unpredictable and also because our ability to foresee the myriad consequences of our own actions is limited. Here we studied how humans select actions under such extrinsic and intrinsic uncertainty, in view of an exponentially expanding number of prospects on a branching multivalued visual stimulus. A triangular grid of disks of different sizes scrolled down a touchscreen at a variable speed. The larger disks represented larger rewards. The task was to maximize the cumulative reward by touching one disk at a time in a rapid sequence, forming an upward path across the grid, while every step along the path constrained the part of the grid accessible in the future. This task captured some of the complexity of natural behavior in the risky and dynamic world, where ongoing decisions alter the landscape of future rewards. By comparing human behavior with behavior of ideal actors, we identified the strategies used by humans in terms of how far into the future they looked (their "depth of computation" and how often they attempted to incorporate new information about the future rewards (their "recalculation period". We found that, for a given task difficulty, humans traded off their depth of computation for the recalculation period. The form of this tradeoff was consistent with a complete, brute-force exploration of all possible paths up to a resource-limited finite depth. A step-by-step analysis of the human behavior revealed that participants took into account very fine distinctions between the future rewards and that they abstained from some simple heuristics in assessment of the alternative paths, such as seeking only the largest disks or avoiding the smaller disks. The participants preferred to reduce their depth of computation or increase the recalculation period rather than sacrifice the precision of computation.

  17. Pure Phase Solubility Limits: LANL

    International Nuclear Information System (INIS)

    C. Stockman

    2001-01-01

    The natural and engineered system at Yucca Mountain (YM) defines the site-specific conditions under which one must determine to what extent the engineered and the natural geochemical barriers will prevent the release of radioactive material from the repository. Most important mechanisms for retention or enhancement of radionuclide transport include precipitation or co-precipitation of radionuclide-bearing solid phases (solubility limits), complexation in solution, sorption onto surfaces, colloid formation, and diffusion. There may be many scenarios that could affect the near-field environment, creating chemical conditions more aggressive than the conditions presented by the unperturbed system (such as pH changes beyond the range of 6 to 9 or significant changes in the ionic strength of infiltrated waters). For an extended period of time, the near-field water composition may be quite different and more extreme in pH, ionic strength, and CO 2 partial pressure (or carbonate concentration) than waters at some distance from the repository. Reducing conditions, high pH (up to 11), and low carbonate concentration may be present in the near-field after reaction of infiltrating groundwater with engineered barrier systems, such as cementitious materials. In the far-field, conditions are controlled by the rock-mass buffer providing a near-neutral, oxidizing, low-ionic-strength environment that controls radionuclide solubility limits and sorption capacities. There is the need for characterization of variable chemical conditions that affect solubility, speciation, and sorption reactions. Modeling of the groundwater chemistry is required and leads to an understanding of solubility and speciation of the important radionuclides. Because experimental studies cannot be performed under the numerous potential chemical conditions, solubility limitations must rely on geochemical modeling of the radionuclide's chemistry. Fundamental thermodynamic properties, such as solubility products

  18. Pure Phase Solubility Limits: LANL

    Energy Technology Data Exchange (ETDEWEB)

    C. Stockman

    2001-01-26

    The natural and engineered system at Yucca Mountain (YM) defines the site-specific conditions under which one must determine to what extent the engineered and the natural geochemical barriers will prevent the release of radioactive material from the repository. Most important mechanisms for retention or enhancement of radionuclide transport include precipitation or co-precipitation of radionuclide-bearing solid phases (solubility limits), complexation in solution, sorption onto surfaces, colloid formation, and diffusion. There may be many scenarios that could affect the near-field environment, creating chemical conditions more aggressive than the conditions presented by the unperturbed system (such as pH changes beyond the range of 6 to 9 or significant changes in the ionic strength of infiltrated waters). For an extended period of time, the near-field water composition may be quite different and more extreme in pH, ionic strength, and CO{sub 2} partial pressure (or carbonate concentration) than waters at some distance from the repository. Reducing conditions, high pH (up to 11), and low carbonate concentration may be present in the near-field after reaction of infiltrating groundwater with engineered barrier systems, such as cementitious materials. In the far-field, conditions are controlled by the rock-mass buffer providing a near-neutral, oxidizing, low-ionic-strength environment that controls radionuclide solubility limits and sorption capacities. There is the need for characterization of variable chemical conditions that affect solubility, speciation, and sorption reactions. Modeling of the groundwater chemistry is required and leads to an understanding of solubility and speciation of the important radionuclides. Because experimental studies cannot be performed under the numerous potential chemical conditions, solubility limitations must rely on geochemical modeling of the radionuclide's chemistry. Fundamental thermodynamic properties, such as solubility

  19. Comportamento de ensaios de arrancamento de placas embutidas em camadas de solo-cimento-fibra

    OpenAIRE

    Vinícius Girardello

    2014-01-01

    Fundações diretas submetidas a carregamentos de compressão vertical têm sido frequentemente ensaiadas e seus comportamentos já são bem conhecidos no ramo de projeto de fundações. Fundações submetidas à tração têm crescido em importância devido ao aumento de perspectivas de uso de fontes de energia renováveis tais como turbinas de energia eólica e não renováveis tais como plataformas petrolíferas, bem como torres de transmissão de energia, cujas cargas de tração podem ser de grande importância...

  20. Holography beyond the Penrose limit

    International Nuclear Information System (INIS)

    Callan, Curtis G.; McLoughlin, Tristan; Swanson, Ian

    2004-01-01

    The flat pp-wave background geometry has been realized as a particular Penrose limit of AdS 5 xS 5 . It describes a string that has been infinitely boosted along an equatorial null geodesic in the S 5 subspace. The string worldsheet Hamiltonian in this background is free. Finite boosts lead to curvature corrections that induce interacting perturbations of the string worldsheet Hamiltonian. We develop a systematic light-cone gauge quantization of the interacting worldsheet string theory and use it to obtain the interacting spectrum of the so-called 'two-impurity' states of the string. The quantization is technically rather intricate and we provide a detailed account of the methods we use to extract explicit results. We give a systematic treatment of the fermionic states and are able to show that the spectrum possesses the proper extended supermultiplet structure (a nontrivial fact since half the supersymmetry is nonlinearly realized). We test holography by comparing the string energy spectrum with the scaling dimensions of corresponding gauge theory operators. We confirm earlier results that agreement obtains in low orders of perturbation theory, but breaks down at third order. The methods presented here can be used to explore these issues in a wider context than is specifically dealt with in this paper

  1. IDENTIDADES MASCULINAS: LIMITES E POSSIBILIDADES

    Directory of Open Access Journals (Sweden)

    May-Lin Wang

    2006-06-01

    Full Text Available O presente trabalho toma por base uma abordagem psicossocial para discorrer sobre os limites impostos pelos estereótipos de gênero à construção de uma identidade masculina, em contraposição às possibilidades de subjetivação, num cenário cultural de pluralidade identitária. Ênfase é dada à socialização estereotipada dos meninos, num processo no qual se verifica uma espécie de superposição do contexto socio-histórico em que cresceram os pais àquele no qual o menino é socializado, acentuando determinadas crenças sobre gênero. O modelo tradicional de virilidade, que imperava inquestionável até bem pouco tempo, ignorando as necessidades afetivas e valorizando características como a competitividade, a preocupação com o desempenho, o autoritarismo, a dominação e a opressão, vem sendo questionado como pilar maior da identidade masculina tradicional.

  2. Shear wall ultimate drift limits

    International Nuclear Information System (INIS)

    Duffey, T.A.; Goldman, A.; Farrar, C.R.

    1994-04-01

    Drift limits for reinforced-concrete shear walls are investigated by reviewing the open literature for appropriate experimental data. Drift values at ultimate are determined for walls with aspect ratios ranging up to a maximum of 3.53 and undergoing different types of lateral loading (cyclic static, monotonic static, and dynamic). Based on the geometry of actual nuclear power plant structures exclusive of containments and concerns regarding their response during seismic (i.e.,cyclic) loading, data are obtained from pertinent references for which the wall aspect ratio is less than or equal to approximately 1, and for which testing is cyclic in nature (typically displacement controlled). In particular, lateral deflections at ultimate load, and at points in the softening region beyond ultimate for which the load has dropped to 90, 80, 70, 60, and 50 percent of its ultimate value, are obtained and converted to drift information. The statistical nature of the data is also investigated. These data are shown to be lognormally distributed, and an analysis of variance is performed. The use of statistics to estimate Probability of Failure for a shear wall structure is illustrated

  3. Image artifacts and technical limitations

    International Nuclear Information System (INIS)

    Kelly, W.M.

    1987-01-01

    The swift temporal progression of magnetic resonance imaging (MRI) from experimental prototype design to sophisticated instrument production can be sharply contrasted to the more protracted time course that characterized the development of X-ray computed tomography (CT). Most notably, the current generation of CT scanners represents the product of more than a decade of design innovation and technologic improvement, punctuated by the introduction of a whole new ''generation'' of CT scanners at periodic intervals. The more rapid evolutionary changes unique to MRI have been permitted by the greater abundance of sophisticated technologic expertise and necessitated by economic considerations, especially the desire to avoid premature obsolescence. Quite clearly, ''state-of-the-art'' MRI units available today are intended to remain state of the art for many years into the future. In clinical trials, MRI has proved particularly effacacious for evaluation of suspected neurologic disease, prompting neuroradiologists to welcome this new non-invasive diagnostic tool with unprecedented enthusiasm. In early reports, the lack of ionizing radiation, apparent absence of significant biological hazards, and ''elimination'' of artifacts were all acclaimed as major technical advantages. Now, as this diagnostic modality is undergoing widespread dissemination and a large body of clinical experience begins to accumulate, increasing attention is being focused on the limitations of MRI

  4. Microdosimetric basis for exposure limits

    International Nuclear Information System (INIS)

    Brackenbush, L.W.; Braby, L.A.

    1986-10-01

    The new organ-weighted effective dose equivalents should provide a much more accurate estimation of the degree of hazard for a worker's exposure to ionizing radiations. The method involves the microdosimetric concept of lineal energy to help establish exposure limits and will provide a unified system applicable to all types of ionizing radiation. Rather than being only calculated values, the effective dose equivalents and quality factors will be experimentally measured using tissue equivalent proportional counters. The measurement may be difficult to perform at various depths in an anthropomorphic phantom. Operational health physicists will be concerned about the lack of survey instruments and personnel dosimeters that measure lineal energy distributions. Their possible objections may be mitigated by the commercial introduction of instruments based upon tissue equivalent proportional counters or related devices containing inexpensive microprocessors. The many potential benefits include providing a uniform method for implementing the proposed increases in quality factors for neutrons and photons, providing a more unified approach for combining external and internal exposures, and potentially resolving questions about dosimeter placement and dose assessment for nonuniform exposures to mixed radiations. 16 refs., 3 figs

  5. Photon and graviton mass limits

    Energy Technology Data Exchange (ETDEWEB)

    Nieto, Michael [Los Alamos National Laboratory; Goldhaber Scharff, Alfred [SUNY

    2008-01-01

    We review past and current studies of possible long-distance, low-frequency deviations from Maxwell electrodynamics and Einstein gravity. Both have passed through three phases: (1) Testing the inverse-square laws of Newton and Coulomb, (2) Seeking a nonzero value for the rest mass of photon or graviton, and (3) Considering more degrees of freedom, allowing mass while preserving gauge or general-coordinate invariance. For electrodynamics there continues to be no sign of any deviation. Since our previous review the lower limit on the photon Compton wavelength (associated with weakening of electromagnetic fields in vacuum over large distance scale) has improved by four orders of magnitude, to about one astronomical unit. Rapid current progress in astronomical observations makes it likely that there will be further advances. These ultimately could yield a bound exceeding galactic dimensions, as has long been contemplated. Meanwhile, for gravity there have been strong arguments about even the concept of a graviton rest mass. At the same time there are striking observations, commonly labeled 'dark matter' and 'dark energy' that some argue imply modified gravity. This makes the questions for gravity much more interesting. For dark matter, which involves increased attraction at large distances, any explanation by modified gravity would be qualitatively different from graviton mass. Because dark energy is associated with reduced attraction at large distances, it might be explained by a graviton-mass-like effect.

  6. Low-visibility and night-time oil spill response operations; Operacoes noturnas e com baixa visibilidade em resposta a vazamentos com oleo

    Energy Technology Data Exchange (ETDEWEB)

    Lyra, Geraldo Marcelo Barroso; Margem, Henrique da Cunha; Skrepnek, Clarissa Cavalheiro; Lyra, Ana Paula Lopes Coelho de Castro; Silva, Ana Claudia Andriolli Vieira da; Antoun, Augusto Resende [Hidroclean Protecao Ambiental, Rio de Janeiro, RJ (Brazil)

    2008-07-01

    The expansion on E and P area and the raise on importation and exportation activities by sea, cause not only commercial benefits, but also expressive environmental risks. This fact is reaffirmed by the actions of Brazilian environmental agencies in order to control potential polluter activities. However, these agencies are against any activity related to oil spill incidents that operate at night-time or during low-visibility condition because of the elevated risk of accidents on this kind of operation. In the other hand, delays on start response operation can be expensive by reducing recovery rates and increasing environmental impacts. Thus, this paper objective is to analyze studies and reports of night-time and low-visibility oil spill response operations occurred in other countries, concluding that when the right equipment is used, it is possible to start or continue oil spill operation independent of weather. However, before choose to start an operation at night, an assessment should be make to know if the risks outweigh the benefits, remarking that safety is always the primary concern. (author)

  7. The limits of informed consent.

    Science.gov (United States)

    1975-09-01

    The patient, a 59-year-old man, was referred to a psychiatric hospital with what appeared initially to be the signs and symptoms of mental disorder. In hospital a lesion of the brain was diagnosed and surgery was proposed to relieve the condition. The patient, however, during this and subsequent admissions to hospital, refused operation. His refusal to consent was regarded as valid as he seemed to have good insight into his condition. Finally, under section 26 of the Mental Health Act, he was treated surgically. Unfortunately the patient died six weeks later of intracranial haemorrhage. Three comments are made on this case - two by psychiatrists, Dr K Davison and Dr Ashley Robin, the other by a professor of Christian ethics, Professor F C Blackie. Both psychiatrists argue that when a patient's mind is affected by mental or organic illness to the degree that 'he cannot bring a rational and conscious mind' to the question of his treatment then the doctor, in consultation with the relatives, making clear to them the likely course of events if an operation is not performed, must take whatever is the proper course of action, in this case surgery. In this view, such an operation performed immediately the diagnosis was confirmed might not have been so complicated. Professor Blackie, commending 'the attempt to regard the patient as a responsible human being' with a 'moral right to be consulted on all aspects of treatment', questions in this patient the limits to which the appeal to reason was carried. He concludes that 'in this situation the advice and consent of the family must weigh more heavily than the statements of the patient'.

  8. The limits of racial prejudice

    Science.gov (United States)

    Lewis, Kevin

    2013-01-01

    The racial segregation of romantic networks has been documented by social scientists for generations. However, because of limitations in available data, we still have a surprisingly basic idea of the extent to which this pattern is generated by actual interpersonal prejudice as opposed to structural constraints on meeting opportunities, how severe this prejudice is, and the circumstances under which it can be reduced. I analyzed a network of messages sent and received among 126,134 users of a popular online dating site over a 2.5-mo period. As in face-to-face interaction, online exchanges are structured heavily by race. Even when controlling for regional differences in meeting opportunities, site users—especially minority site users—disproportionately message other users from the same racial background. However, this high degree of self-segregation peaks at the first stage of contact. First, users from all racial backgrounds are equally likely or more likely to cross a racial boundary when reciprocating than when initiating romantic interest. Second, users who receive a cross-race message initiate more new interracial exchanges in the future than they would have otherwise. This effect varies by gender, racial background, and site experience; is specific to the racial background of the original sender; requires that the recipient replied to the original message; and diminishes after a week. In contrast to prior research on relationship outcomes, these findings shed light on the complex interactional dynamics that—under certain circumstances—may amplify the effects of racial boundary crossing and foster greater interracial mixing. PMID:24191008

  9. Opacity Limit for Supermassive Protostars

    Science.gov (United States)

    Becerra, Fernando; Marinacci, Federico; Inayoshi, Kohei; Bromm, Volker; Hernquist, Lars E.

    2018-04-01

    We present a model for the evolution of supermassive protostars from their formation at {M}\\star ≃ 0.1 {M}ȯ until their growth to {M}\\star ≃ {10}5 {M}ȯ . To calculate the initial properties of the object in the optically thick regime, we follow two approaches: one based on idealized thermodynamic considerations, and another based on a more detailed one-zone model. Both methods derive a similar value of {n}{{F}}≃ 2× {10}17 {cm}}-3 for the density of the object when opacity becomes important, i.e., the opacity limit. The subsequent evolution of the growing protostar is determined by the accretion of gas onto the object and can be described by a mass–radius relation of the form {R}\\star \\propto {M}\\star 1/3 during the early stages, and of the form {R}\\star \\propto {M}\\star 1/2 when internal luminosity becomes important. For the case of a supermassive protostar, this implies that the radius of the star grows from {R}\\star ≃ 0.65 {au} to {R}\\star ≃ 250 {au} during its evolution. Finally, we use this model to construct a subgrid recipe for accreting sink particles in numerical simulations. A prime ingredient thereof is a physically motivated prescription for the accretion radius and the effective temperature of the growing protostar embedded inside it. From the latter, we can conclude that photoionization feedback can be neglected until very late in the assembly process of the supermassive object.

  10. Food irradiation: advantages and limitations

    International Nuclear Information System (INIS)

    Hernandes, N.K.; Vital, H. de C.; Sabaa-Srur, A.U.O.

    2003-01-01

    Food irradiation is a physical method of processing food (e.g. freezing, canning). It has been thoroughly researched over the last four decades and is recognized as a safe and wholesome method. It has the potential both of disinfesting dried food to reduce storage losses and disinfesting fruits and vegetables to meet quarantine requirements for export trade. Low doses of irradiation inhibit spoilage losses due to sprouting of root and tuber crops. Food- borne diseases due to contamination by pathogenic microorganisms and parasites of meat, poultry, fish, fishery products and spices are on the increase. Irradiation of these solid foods can decontaminate them of pathogenic organisms and thus provide safe food to the consumer. Irradiation can successfully replace the fumigation treatment of cocoa beans and coffee beans and disinfest dried fish, dates, dried fruits, etc. One of the most important advantages of food irradiation processing is that it is a coldprocess which does not significantly alter physico-chemical characters of the treated product. It can be applied to food after its final packaging. Similar to other physical processes of food processing, (e.g. canning, freezing), irradiation is a capital intensive process. Thus, adequate product volume must be made available in order to maximize the use of the facility and minimize the unit cost of treatment. Lack of harmonization of regulations among the countries which have approved irradiated foods hampers the introduction of this technique for international trade. Action at the international level has to be taken in order to remedy this situation. One of the important limitations of food irradiation processing is its slow acceptance by consumers, due inter alia to a perceived association with radioactivity. The food industry tends to be reluctant to use the technology in view of uncertainties regarding consumer acceptance of treated foods. Several market testing and consumer acceptance studies have been carried

  11. Limitations of Human Visual Working Memory

    OpenAIRE

    Wesenick, Maria-Barbara

    2004-01-01

    The present empirical study investigates limitations of human visual working memory (VWM). The experiments of the present work involve the experimental paradigm of change detection using simple geometrical objects in the form of rectangles of different colour, length, and orientation. It can be shown, that a limited performance in the temporary storage of visual information has multiple sources. Limitations of VWM can be attributed to a limited capacity or a limited duration, but also to limi...

  12. Term limits and the tobacco industry.

    Science.gov (United States)

    Apollonio, Dorie E; Glantz, Stanton A; Bero, Lisa A

    2014-03-01

    In the 1990s several American states passed term limits on legislators with the stated intention of reducing the influence of wealthy industries on career legislators. Although term limits in the United States do not have a direct relationship to public health, the tobacco industry anticipated that term limits could have indirect effects by either limiting or expanding industry influence. We detail the strategy of the tobacco industry in the wake of term limits using internal tobacco company documents and a database of campaign contributions made to legislators in term limited states between 1988 and 2002. Despite some expectations that term limits would limit tobacco industry access to state legislators, term limits appear to have had the opposite effect. Copyright © 2013 Elsevier Ltd. All rights reserved.

  13. Pump limiter studies in Tore Supra

    International Nuclear Information System (INIS)

    Chatelier, M.; Bonnel, P.; Bruneau, J.L.; Gil, C.; Grisolia, C.; Loarer, T.; Martin, G.; Pegourie, B.; Rodriguez, L.

    1991-01-01

    The aim of the Tore Supra pump limiter program is to study particle exhaust with a pump limiter system in long-pulse discharges with continuous pellet fueling and strong auxiliary heating. The pump limiter system consists of six vertical modules, located at the bottom of the machine, and one horizontal module at the outer midplane. The instrumentation of the limiter included pressure gauges, a residual gas analyser Langmuir probes, a spectrometer and water calorimeters. Initial results in low-density discharges, with the outboard limiter only, showed a modest effect on the plasma density, while large exhaust fluxes were measured in the pump limiter, without any external fueling

  14. On thermodynamic limits of entropy densities

    NARCIS (Netherlands)

    Moriya, H; Van Enter, A

    We give some sufficient conditions which guarantee that the entropy density in the thermodynamic limit is equal to the thermodynamic limit of the entropy densities of finite-volume (local) Gibbs states.

  15. Setting limits on supersymmetry using simplified models

    CERN Document Server

    Gutschow, C.

    2012-01-01

    Experimental limits on supersymmetry and similar theories are difficult to set because of the enormous available parameter space and difficult to generalize because of the complexity of single points. Therefore, more phenomenological, simplified models are becoming popular for setting experimental limits, as they have clearer physical implications. The use of these simplified model limits to set a real limit on a concrete theory has not, however, been demonstrated. This paper recasts simplified model limits into limits on a specific and complete supersymmetry model, minimal supergravity. Limits obtained under various physical assumptions are comparable to those produced by directed searches. A prescription is provided for calculating conservative and aggressive limits on additional theories. Using acceptance and efficiency tables along with the expected and observed numbers of events in various signal regions, LHC experimental results can be re-cast in this manner into almost any theoretical framework, includ...

  16. Fractional Diffusion Limit for Collisional Kinetic Equations

    KAUST Repository

    Mellet, Antoine; Mischler, Sté phane; Mouhot, Clé ment

    2010-01-01

    This paper is devoted to diffusion limits of linear Boltzmann equations. When the equilibrium distribution function is a Maxwellian distribution, it is well known that for an appropriate time scale, the small mean free path limit gives rise to a

  17. Toward Modeling Limited Plasticity in Ceramic Materials

    National Research Council Canada - National Science Library

    Grinfeld, Michael; Schoenfeld, Scott E; Wright, Tim W

    2008-01-01

    The characteristic features of many armor-related ceramic materials are the anisotropy on the micro-scale level and the very limited, though non-vanishing, plasticity due to limited number of the planes for plastic slip...

  18. 48 CFR 1417.402 - Limitations.

    Science.gov (United States)

    2010-10-01

    ... CONTRACT TYPES SPECIAL CONTRACTING METHODS Leader Company Contracting 1417.402 Limitations. Use of leader company contracting for a product, subject to the limitations in FAR 17.402, shall require advance...

  19. The limiting current in a one-dimensional situation: Transition from a space charge limited to magnetically limited flow

    International Nuclear Information System (INIS)

    Kumar, Raghwendra; Biswas, Debabrata

    2008-01-01

    For a nonrelativistic electron beam propagating in a cylindrical drift tube, it is shown that the limiting current density does not saturate to the electrostatic one-dimensional (1D) estimate with increasing beam radius. Fully electromagnetic particle-in-cell (PIC) simulation studies show that beyond a critical aspect ratio, the limiting current density is lower than the 1D electrostatic prediction. The lowering in the limiting current density is found to be due to the transition from the space charge limited to magnetically limited flow. An adaptation of Alfven's single particle trajectory method is used to estimate the magnetically limited current as well as the critical radius beyond which the flow is magnetically limited in a drift tube. The predictions are found to be in close agreement with PIC simulations

  20. The density limit in JET diverted plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, D J; Clement, S; Gottardi, N; Gowers, C; Harbour, P; Loarte, A; Horton, L; Lingertat, J; Lowry, C G; Saibene, G; Stamp, M; Stork, D [Commission of the European Communities, Abingdon (United Kingdom). JET Joint Undertaking; Monk, R [Royal Holloway Coll., London (United Kingdom). Dept. of Physics

    1994-07-01

    In JET limiter plasmas the density limit is associated with radiated power fractions of 100% and, in plasmas with carbon limiters, it is invariably disruptive. However, in discharges with solid beryllium limiters the limit is identified with the formation of a MARFE and disruptions are less frequent. In addition, the improved conditioning of the vessel arising from the use of beryllium has significantly improved the density limit scaling, so that the maximum density rises with the square root of the input power. In diverted plasmas several confinement regimes exist, making the characterization of the density limit more complex. While the density limit in L-mode plasmas is generally disruptive, the limit in ELMy and ELM-free H-modes generally prompts a return to the L-mode and a disruption is not inevitable. The density limit does rise with the increasing power, but the L-to-H transition complicates the analysis. Nevertheless, at low plasma currents (<2 MA), densities significantly above the Greenwald limit can be achieved, while at higher currents power handling limitations have constrained the range of density which can be achieved. (authors). 7 refs., 4 figs.

  1. 12 CFR 24.4 - Investment limits.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Investment limits. 24.4 Section 24.4 Banks and... ENTITIES, COMMUNITY DEVELOPMENT PROJECTS, AND OTHER PUBLIC WELFARE INVESTMENTS § 24.4 Investment limits. (a) Limits on aggregate outstanding investments. A national bank's aggregate outstanding investments under...

  2. 7 CFR 52.3185 - Moisture limits.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Moisture limits. 52.3185 Section 52.3185 Agriculture... United States Standards for Grades of Dried Prunes Moisture, Uniformity of Size, Defects § 52.3185 Moisture limits. Dried prunes shall not exceed the moisture limits for the applicable grades and kind and...

  3. 47 CFR 73.1725 - Limited time.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Limited time. 73.1725 Section 73.1725... Rules Applicable to All Broadcast Stations § 73.1725 Limited time. (a) Operation is applicable only to... stations on the channel. (b) No authorization will be granted for: (1) A new limited time station; (2) A...

  4. Tube temperature rise limits: Boiling considerations

    Energy Technology Data Exchange (ETDEWEB)

    Vanderwater, R.G.

    1952-03-26

    A revision of tube power limits based on boiling considerations was presented earlier. The limits were given on a basis of tube power versus header pressure. However, for convenience of operation, the limits have been converted from tube power to permissible water temperature rise. The permissible {triangle}t`s water are given in this document.

  5. Effluent release limits, sources and control

    International Nuclear Information System (INIS)

    Swindell, G.E.

    1977-01-01

    Objectives of radiation protection in relation to releases. Environmental transfer models for radionuclides. Relationship between releases, environmental levels and doses to persons. Establishment of release limits: Limits based on critical population group concept critical pathway analysis and identification of critical group. Limits based on optimization of radiation protection individual dose limits, collective doses and dose commitments 1) differential cost benefit analysis 2) authorized and operational limits taking account of future exposures. Monitoring of releases to the environment: Objectives of effluent monitoring. Typical sources and composition of effluents; design and operation of monitoring programmes; recording and reporting of monitoring results; complementary environmental monitoring. (orig.) [de

  6. Plane wave limits and T-duality

    International Nuclear Information System (INIS)

    Guven, R.

    2000-04-01

    The Penrose limit is generalized to show that, any leading order solution of the low-energy field equations in any one of the five string theories has a plane wave solution as a limit. This limiting procedure takes into account all the massless fields that may arise and commutes with the T-duality so that any dual solution has again a plane wave limit. The scaling rules used in the limit are unique and stem from the scaling property of the D = 11 supergravity action. Although the leading order dual solutions need not be exact or supersymmetric, their plane wave limits always preserve some portion of the Poincare supersymmetry and solve the relevant field equations in all powers of the string tension parameter. Further properties of the limiting procedure are discussed. (author)

  7. Approach to DOE threshold guidance limits

    International Nuclear Information System (INIS)

    Shuman, R.D.; Wickham, L.E.

    1984-01-01

    The need for less restrictive criteria governing disposal of extremely low-level radioactive waste has long been recognized. The Low-Level Waste Management Program has been directed by the Department of Energy (DOE) to aid in the development of a threshold guidance limit for DOE low-level waste facilities. Project objectives are concernd with the definition of a threshold limit dose and pathway analysis of radionuclide transport within selected exposure scenarios at DOE sites. Results of the pathway analysis will be used to determine waste radionuclide concentration guidelines that meet the defined threshold limit dose. Methods of measurement and verification of concentration limits round out the project's goals. Work on defining a threshold limit dose is nearing completion. Pathway analysis of sanitary landfill operations at the Savannah River Plant and the Idaho National Engineering Laboratory is in progress using the DOSTOMAN computer code. Concentration limit calculations and determination of implementation procedures shall follow completion of the pathways work. 4 references

  8. Impact limiter retention using a tape joint

    International Nuclear Information System (INIS)

    Gonzales, A.; Eakes, R.G.

    1986-01-01

    The Beneficial Uses Shipping System (BUSS) Cask employs polyurethane foam impact limiters that fit onto the ends of the cask. A foam impact limiter takes energy out of a system during a hypothetical accident condition by allowing foam crush and large deformations to occur. This, in turn, precludes high stresses or deformations from occurring to the cask. Because of the need to transmit significant amounts of heat to the environment, the BUSS cask impact limiters were designed to shield a minimum amount of the cask surface area. With this design impact limiter retention after the initial impact resulting from the 9 meter regulatory drops becomes a concern. Retention is essential to ensure the cask does not experience higher stresses during any secondary or rebound effects without impact limiters than it does during the 9 meter regulatory drop with impact limiters in place

  9. On the Limitations of Biological Knowledge

    Science.gov (United States)

    Dougherty, Edward R; Shmulevich, Ilya

    2012-01-01

    Scientific knowledge is grounded in a particular epistemology and, owing to the requirements of that epistemology, possesses limitations. Some limitations are intrinsic, in the sense that they depend inherently on the nature of scientific knowledge; others are contingent, depending on the present state of knowledge, including technology. Understanding limitations facilitates scientific research because one can then recognize when one is confronted by a limitation, as opposed to simply being unable to solve a problem within the existing bounds of possibility. In the hope that the role of limiting factors can be brought more clearly into focus and discussed, we consider several sources of limitation as they apply to biological knowledge: mathematical complexity, experimental constraints, validation, knowledge discovery, and human intellectual capacity. PMID:23633917

  10. Limit of the radionuclides in granite

    International Nuclear Information System (INIS)

    Wang Shaling; Jiang Rangrong

    2003-01-01

    Granite is an important sort of building materials. Their radionuclide contents are limited by the national standard GB6566-2001 just as other building materials. This standard divides them into main materials and decorative materials, and relaxes the limit of the latter obviously. Owing to the consideration of public dose limit and environment protection, this method needs discussion. Otherwise, red granite contains high radionuclide contents relatively, especially the sort of Indian Red, and need be paid more attention

  11. Frontiers of particle beams: Intensity limitations

    International Nuclear Information System (INIS)

    Dienes, M.; Month, M.; Turner, S.

    1992-01-01

    The present volume is the proceedings of the latest of these joint schools, held on Hilton Head Island, South Carolina, in 1990. This course dealt with intensity limitations and was centered on a series of lectures which could be divided into the following main categories: Self and environmental fields, Coherent instabilities and their simulation, Beam-beam interaction, Other multiparticle effects, Beam source limitations, Engineering limitations. (orig.)

  12. Diffraction limit of refractive compound lens

    International Nuclear Information System (INIS)

    Kolchevsky, N.N.; Petrov, P.V.

    2015-01-01

    A compound X-ray and neutron lenses is an array of lenses with a common axis. The resolution limited by aberration and by diffraction. Diffraction limit comes from theory based on absorption aperture of the compound refractive lenses. Beam passing through transparent lenses form Airy pattern. Results of calculation of diffraction resolution limit for non-transparent X-ray and neutron lenses are discussed. (authors)

  13. The Limited Liability Company: An Analysis

    OpenAIRE

    Wayne Wells; Gary Yoshimoto

    1993-01-01

    In recent years, businesses in many states have been given the opportunity to select a new form in which to conduct business called the limited liability company. This form provides the advantage of the personal liability protection of a corporation, while being taxed as a partnership. If most states create the limited liability company and current issues of uncertainty are favorably resolved, the limited liability company should become the most advantageous business form for most small and m...

  14. Analysis of forming limit in tube hydroforming

    International Nuclear Information System (INIS)

    Kim, Chan Il; Yang, Seung Hang; Kim, Young Suk

    2013-01-01

    The automotive industry has shown increasing interest in tube hydroforming. Despite many automobile structural parts being produced from cylindrical tubes, failures frequently occur during tube hydroforming under improper forming conditions. These problems include wrinkling, buckling, folding back, and bursting. We perform analytical studies to determine forming limits in tube hydroforming and demonstrate how these forming limits are influenced by the loading path. Theoretical results for the forming limits of wrinkling and bursting are compared with experimental results for an aluminum tube.

  15. Fundamental gravitational limitations to quantum computing

    International Nuclear Information System (INIS)

    Gambini, R.; Porto, A.; Pullin, J.

    2006-01-01

    Lloyd has considered the ultimate limitations the fundamental laws of physics place on quantum computers. He concludes in particular that for an 'ultimate laptop' (a computer of one liter of volume and one kilogram of mass) the maximum number of operations per second is bounded by 10 51 . The limit is derived considering ordinary quantum mechanics. Here we consider additional limits that are placed by quantum gravity ideas, namely the use of a relational notion of time and fundamental gravitational limits that exist on time measurements. We then particularize for the case of an ultimate laptop and show that the maximum number of operations is further constrained to 10 47 per second. (authors)

  16. Classical limit for quantum mechanical energy eigenfunctions

    International Nuclear Information System (INIS)

    Sen, D.; Sengupta, S.

    2004-01-01

    The classical limit problem is discussed for the quantum mechanical energy eigenfunctions using the Wentzel-Kramers-Brillouin approximation, free from the problem at the classical turning points. A proper perspective of the whole issue is sought to appreciate the significance of the discussion. It is observed that for bound states in arbitrary potential, appropriate limiting condition is definable in terms of a dimensionless classical limit parameter leading smoothly to all observable classical results. Most important results are the emergence of classical phase space, keeping the observable distribution functions non-zero only within the so-called classical region at the limit point and resolution of some well-known paradoxes. (author)

  17. TFTR movable limiter instrumentation and controls

    International Nuclear Information System (INIS)

    Frankenberg, J.; Collins, D.; Kaufmann, D.; Mamoun, A.

    1983-01-01

    The TFTR movable limiter is a single poloidal limiter located within one 18 /SUP o/ segment of the vacuum vessel. It consists of three (3) interconnected inconel backing plates covered with titanium carbide coated graphite tiles. The backing plates are positioned by three independent screw drive actuators. Cooling water is fed through the horizontal port cover to tubes brazed onto the backs of the backing plates. Thermocouples monitor the limiter temperature. (1) and more fully described in refs. (1) and (2). The positioning actuators are driven by independently controlled DC servo motors, controlled either locally or from CICADA. Drive motor shaft position is monitored by chain driven encoders and potentiometers. Limiter blade position can be varied to suit any plasma within the operating range. CICADA is programmed to keep the limiter stroke within safe operating limits. A microprocessor duplicates the CICADA protective function allowing limiter operation without CICADA. The potentiometer signal is sent to an analog computer, which safeguards the limiter against failure of the encoders or the micro-processor. Cooling water flows through the limiter in 3 separate paths, one for each blade. The flow rate and temperature rise through each loop are measured accurately to allow CICADA to calculate the heat into each blade. The water system is also interlocked and alarmed to prevent dumping of water into the vacuum vessel

  18. Successional dynamics drive tropical forest nutrient limitation

    Science.gov (United States)

    Chou, C.; Hedin, L. O. O.

    2017-12-01

    It is increasingly recognized that nutrients such as N and P may significantly constrain the land carbon sink. However, we currently lack a complete understanding of these nutrient cycles in forest ecosystems and how to incorporate them into Earth System Models. We have developed a framework of dynamic forest nutrient limitation, focusing on the role of secondary forest succession and canopy gap disturbances as bottlenecks of high plant nutrient demand and limitation. We used succession biomass data to parameterize a simple ecosystem model and examined the dynamics of nutrient limitation throughout tropical secondary forest succession. Due to the patterns of biomass recovery in secondary tropical forests, we found high nutrient demand from rapid biomass accumulation in the earliest years of succession. Depending on previous land use scenarios, soil nutrient availability may also be low in this time period. Coupled together, this is evidence that there may be high biomass nutrient limitation early in succession, which is partially met by abundant symbiotic nitrogen fixation from certain tree species. We predict a switch from nitrogen limitation in early succession to one of three conditions: (i) phosphorus only, (ii) phosphorus plus nitrogen, or (iii) phosphorus, nitrogen, plus light co-limitation. We will discuss the mechanisms that govern the exact trajectory of limitation as forests build biomass. In addition, we used our model to explore scenarios of tropical secondary forest impermanence and the impacts of these dynamics on ecosystem nutrient limitation. We found that secondary forest impermanence exacerbates nutrient limitation and the need for nitrogen fixation early in succession. Together, these results indicate that biomass recovery dynamics early in succession as well as their connection to nutrient demand and limitation are fundamental for understanding and modeling nutrient limitation of the tropical forest carbon sink.

  19. Modelling of particles collection by vented limiters

    International Nuclear Information System (INIS)

    Tsitrone, E.; Pegourie, B.; Granata, G.

    1995-01-01

    This document deals with the use of vented limiters for the collection of neutral particles in Tore Supra. The model developed for experiments is presented together with its experimental validation. Some possible improvements to the present limiter are also proposed. (TEC). 5 refs., 3 figs

  20. 29 CFR 4050.11 - Limitations.

    Science.gov (United States)

    2010-07-01

    ... missing participants. (b) Limitation on benefit value. The total actuarial present value of all benefits... Relating to Labor (Continued) PENSION BENEFIT GUARANTY CORPORATION PLAN TERMINATIONS MISSING PARTICIPANTS § 4050.11 Limitations. (a) Exclusive benefit. The benefits provided for under this part will be the only...

  1. Variable Speed Limit (VSL) - Best Management Practice

    Science.gov (United States)

    2012-07-01

    The Variable Speed Limit (VSL) system on the I-4 corridor in Orlando was implemented by Florida Department of Transportation in 2008, and since its deployment, it was revealed that the majority of traffic exceeds the speed limit by more mph when the ...

  2. Estimating uncertainty of data limited stock assessments

    DEFF Research Database (Denmark)

    Kokkalis, Alexandros; Eikeset, Anne Maria; Thygesen, Uffe Høgsbro

    2017-01-01

    -limited. Particular emphasis is put on providing uncertainty estimates of the data-limited assessment. We assess four cod stocks in the North-East Atlantic and compare our estimates of stock status (F/Fmsy) with the official assessments. The estimated stock status of all four cod stocks followed the established stock...

  3. 50 CFR 20.61 - Importation limits.

    Science.gov (United States)

    2010-10-01

    ... PLANTS (CONTINUED) MIGRATORY BIRD HUNTING Importations § 20.61 Importation limits. No person shall import migratory game birds in excess of the following importation limits: (a) Doves and pigeons. (1) From any foreign country except Mexico, during any one calendar week beginning on Sunday, not to exceed 25 doves...

  4. 47 CFR 90.669 - Emission limits.

    Science.gov (United States)

    2010-10-01

    ... 896-901/935-940 Mhz Band § 90.669 Emission limits. (a) On any frequency in an MTA licensee's spectrum block that is adjacent to a non-MTA frequency, the power of any emission shall be attenuated below the... 47 Telecommunication 5 2010-10-01 2010-10-01 false Emission limits. 90.669 Section 90.669...

  5. 26 CFR 1.851-2 - Limitations.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 9 2010-04-01 2010-04-01 false Limitations. 1.851-2 Section 1.851-2 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Regulated Investment Companies and Real Estate Investment Trusts § 1.851-2 Limitations. (a...

  6. 47 CFR 78.115 - Modulation limits.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Modulation limits. 78.115 Section 78.115... SERVICE Technical Regulations § 78.115 Modulation limits. (a) If amplitude modulation is employed, negative modulation peaks shall not exceed 100 percent modulation. [37 FR 3292, Feb. 12, 1972, as amended...

  7. 47 CFR 74.663 - Modulation limits.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Modulation limits. 74.663 Section 74.663 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES EXPERIMENTAL RADIO... Stations § 74.663 Modulation limits. If amplitude modulation is employed, negative modulation peaks shall...

  8. Central Limit Theorem for Coloured Hard Dimers

    Directory of Open Access Journals (Sweden)

    Maria Simonetta Bernabei

    2010-01-01

    Full Text Available We study the central limit theorem for a class of coloured graphs. This means that we investigate the limit behavior of certain random variables whose values are combinatorial parameters associated to these graphs. The techniques used at arriving this result comprise combinatorics, generating functions, and conditional expectations.

  9. 40 CFR 1502.7 - Page limits.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Page limits. 1502.7 Section 1502.7 Protection of Environment COUNCIL ON ENVIRONMENTAL QUALITY ENVIRONMENTAL IMPACT STATEMENT § 1502.7 Page limits. The text of final environmental impact statements (e.g., paragraphs (d) through (g) of § 1502.10...

  10. Operational limits and disruptions in ITER

    Energy Technology Data Exchange (ETDEWEB)

    Tsunematsu, T; Mizoguchi, T; Yoshino, R [Japan Atomic Energy Research Inst., Tokyo (Japan); Borrass, K; Engelmann, F; Pacher, G; Pacher, H [Max-Planck-Institut fuer Plasmaphysik, Garching (Germany, F.R.). NET Design Team; Cohen, S; Post, D [Princeton Univ., NJ (USA). Plasma Physics Lab.; Hogan, J; Uckan, N A [Oak Ridge National Lab., TN (USA); Krasheninnikov, S; Mukhovatov, V; Parail, V

    1990-12-15

    Detailed knowledge of the operational limits for beta, q and the plasma density will be required for successful and flexible operation of ITER. In this paper, the present data base and guidelines on operational limits and disruptions in the ITER design are presented. 10 refs., 1 fig.

  11. Modular pump limiter systems for large tokamaks

    International Nuclear Information System (INIS)

    Uckan, T.; Klepper, C.C.; Mioduszewski, P.K.; McGrath, R.T.

    1987-09-01

    Long-pulse (>10-s) operation of large tokamaks with high-power (>10-MW) heating and extensive external fueling will require correspondingly efficient particle exhaust for density control. A pump limiter can provide the needed exhaust capability by removing a small percentage of the particles, which would otherwise be recycled. Single pump limiter modules have been operated successfully on ISX-B, PDX, TEXTOR, and PLT. An axisymmetric pump limiter is now being installed and will be studied in TEXTOR. A third type of pump limiter is a system that consists of several modules and exhibits performance different from that of a single module. To take advantage of the flexibility of a modular pump limiter system in a high-power, long-pulse device, the power load must be distributed among a number of modules. Because each added module changes the performance of all the others, a set of design criteria must be defined for the overall limiter system. The design parameters for the modules are then determined from the system requirements for particle and power removal. Design criteria and parameters are presented, and the impact on module design of the state of the art in engineering technology is discussed. The relationship between modules are considered from the standpoint of flux coverage and shadowing effects. The results are applied to the Tore Supra tokamak. A preliminary conceptual design for the Tore Supra pump limiter system is discussed, and the design parameters of the limiter modules are presented. 21 refs., 12 figs

  12. 50 CFR 640.21 - Harvest limitations.

    Science.gov (United States)

    2010-10-01

    ... § 640.21 Harvest limitations. (a) Berried lobsters. A berried (egg-bearing) spiny lobster or slipper...) Undersized attractants. A live spiny lobster under the minimum size limit specified in paragraph (b)(1) of... future use as an attractant in a trap provided it is held in a live well aboard the vessel. No more than...

  13. Analysis of a T-10 graphite limiter

    International Nuclear Information System (INIS)

    Hildebrandt, D.; Laux, M.; Lingertat, J.; Pech, P.; Reiner, H.D.; Strusny, H.; Wolff, H.

    1981-01-01

    Parts of a T-10 graphite limiter used during ohmic heated discharges have been investigated. Erosion and deposition phenomena have been studied by morphological and elemental surface analysis methods. From the results estimates of the plasma parameters near the limiter surface have been made. (orig.)

  14. Limit theorems for functionals of Gaussian vectors

    Institute of Scientific and Technical Information of China (English)

    Hongshuai DAI; Guangjun SHEN; Lingtao KONG

    2017-01-01

    Operator self-similar processes,as an extension of self-similar processes,have been studied extensively.In this work,we study limit theorems for functionals of Gaussian vectors.Under some conditions,we determine that the limit of partial sums of functionals of a stationary Gaussian sequence of random vectors is an operator self-similar process.

  15. Visualizing the Central Limit Theorem through Simulation

    Science.gov (United States)

    Ruggieri, Eric

    2016-01-01

    The Central Limit Theorem is one of the most important concepts taught in an introductory statistics course, however, it may be the least understood by students. Sure, students can plug numbers into a formula and solve problems, but conceptually, do they really understand what the Central Limit Theorem is saying? This paper describes a simulation…

  16. 6 CFR 13.47 - Limitations.

    Science.gov (United States)

    2010-01-01

    ... 6 Domestic Security 1 2010-01-01 2010-01-01 false Limitations. 13.47 Section 13.47 Domestic Security DEPARTMENT OF HOMELAND SECURITY, OFFICE OF THE SECRETARY PROGRAM FRAUD CIVIL REMEDIES § 13.47 Limitations. (a) The notice of hearing with respect to a Claim or Statement must be served in the manner...

  17. Gaussian limit of compact spin systems

    International Nuclear Information System (INIS)

    Bellissard, J.; Angelis, G.F. de

    1981-01-01

    It is shown that the Wilson and Wilson-Villain U(1) models reproduce, in the low coupling limit, the gaussian lattice approximation of the Euclidean electromagnetic field. By the same methods it is also possible to prove that the plane rotator and the Villain model share a common gaussian behaviour in the low temperature limit. (Auth.)

  18. 78 FR 57790 - Extension of Time Limits

    Science.gov (United States)

    2013-09-20

    .... Thus, this modification makes explicit that parties may request extensions for any time limit... Department's attention more quickly, thus increasing the chance that the Department will be able to...; only if the questionnaire is divided into separate sections is the time limit for individual sections...

  19. Back to Classics: Teaching Limits through Infinitesimals.

    Science.gov (United States)

    Todorov, Todor D.

    2001-01-01

    Criticizes the method of using calculators for the purpose of selecting candidates for L, for the limit value of a function. Suggests an alternative: a working formula for calculating the limit value L of a real function in terms of infinitesimals. (Author/ASK)

  20. 14 CFR 141.23 - Advertising limitations.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Advertising limitations. 141.23 Section 141...) SCHOOLS AND OTHER CERTIFICATED AGENCIES PILOT SCHOOLS General § 141.23 Advertising limitations. (a) The... certificate may not advertise that the school is certificated unless it clearly differentiates between courses...

  1. 14 CFR 142.31 - Advertising limitations.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Advertising limitations. 142.31 Section 142...) SCHOOLS AND OTHER CERTIFICATED AGENCIES TRAINING CENTERS General § 142.31 Advertising limitations. (a) A certificate holder may not conduct, and may not advertise to conduct, any training, testing, and checking that...

  2. Subcritical limits for special fissile actinides

    International Nuclear Information System (INIS)

    Clark, H.K.

    1980-01-01

    Critical masses and subcritical mass limits in oxide-water mixtures were calculated for actinide nuclides other than 233 U, 235 U, and 239 Pu that have an odd number of neutrons in the nucleus: S/sub n/ transport theory was used together with cross sections, drawn from the GLASS multigroup library, developed to provide accurate forecasts of actinide production at Savannah River. The subcritical limits are 201 g for 241 Pu, 13 g for 242 /sup m/Am, 90 g for 243 Cm, 30 g for 245 Cm, 900 g for 247 Cm, 10 g for 249 Cf, and 5 g for 251 Cf. Association of 241 Pu with an equal mass of 240 Pu increases the 241 Pu limit to a value greater than that for pure 239 Pu. Association of 242 /sup m/Am with 241 Am increases the limit for the mixture to that for dry, theoretical density AmO 2 at isotopic concentrations of 242 /sup m/Am less than approx. 6%. Association of 245 Cm with 244 Cm increases the limit according to the formula 30 + 0.3 244 Cm/ 245 Cm up to the limit for dry CmO 2 . A limiting mass of 8.15 kg for plutonium containing at least 67% 238 Pu as oxide was calculated that applies (provided 240 Pu exceeds 241 Pu) with no limit on moderation. 1 figure, 5 tables

  3. 7 CFR 770.5 - Loan limitations.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 7 2010-01-01 2010-01-01 false Loan limitations. 770.5 Section 770.5 Agriculture... SPECIAL PROGRAMS INDIAN TRIBAL LAND ACQUISITION LOANS § 770.5 Loan limitations. (a) Loan funds may not be... title. (b) The amount of loan funds used to acquire land may not exceed the market value of the land...

  4. 7 CFR 761.8 - Loan Limitations.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 7 2010-01-01 2010-01-01 false Loan Limitations. 761.8 Section 761.8 Agriculture... SPECIAL PROGRAMS GENERAL PROGRAM ADMINISTRATION General Provisions § 761.8 Loan Limitations. (a) Dollar... cannot exceed any of the following at the time of loan closing or assumption of indebtedness. If the...

  5. Tokamak advanced pump limiter experiments and analysis

    International Nuclear Information System (INIS)

    Conn, R.W.

    1983-06-01

    Experiments with pump limiter modules on several operating tokamaks establish such limiters as efficient collectors of particles and has demonstrated the importance of ballistic scattering as predicted theoretically. Plasma interaction with recycling neutral gas appears to become important as the plasma density increases and the effective ionization mean free path within the module decreases. In limiters with particle collection but without active internal pumping, the neutral gas pressure is found to vary nonlinearly with the edge plasma density at the highest densities studies. Both experiments and theory indicate that the energy spectrum of gas atoms in the pump ducting is non-thermal, consistent with the results of Monte Carlo neutral atom transport calculations. The distribution of plasma power over the front surface of such modules has been measured and appears to be consistent with the predictions of simple theory. Initial results from the latest experiment on the ISX-B tokamak with an actively pumped limiter module demonstrates that the core plasma density can be controlled with a pump limiter and that the scrape-off layer plasma can partially screen the core plasma from gas injection. The results from module pump limiter experiments and from the theory and design analysis of advanced pump limiters for reactors are used to suggest the major features of a definitive, axisymmetric, toroidal belt pump limiter experiment

  6. Limits of detection and decision. Part 4

    International Nuclear Information System (INIS)

    Voigtman, E.

    2008-01-01

    Probability density functions (PDFs) have been derived for a number of commonly used limit of detection definitions, including several variants of the Relative Standard Deviation of the Background-Background Equivalent Concentration (RSDB-BEC) method, for a simple linear chemical measurement system (CMS) having homoscedastic, Gaussian measurement noise and using ordinary least squares (OLS) processing. All of these detection limit definitions serve as both decision and detection limits, thereby implicitly resulting in 50% rates of Type 2 errors. It has been demonstrated that these are closely related to Currie decision limits, if the coverage factor, k, is properly defined, and that all of the PDFs are scaled reciprocals of noncentral t variates. All of the detection limits have well-defined upper and lower limits, thereby resulting in finite moments and confidence limits, and the problem of estimating the noncentrality parameter has been addressed. As in Parts 1-3, extensive Monte Carlo simulations were performed and all the simulation results were found to be in excellent agreement with the derived theoretical expressions. Specific recommendations for harmonization of detection limit methodology have also been made

  7. Heat deposition on the partial limiter

    International Nuclear Information System (INIS)

    Itoh, Kimitaka; Itoh, Sanae-I; Nagasaki, Kazunobu.

    1990-01-01

    The effect of the partial limiter in the outermost magnetic surface of toroidal plasmas is studied. The power deposition on the partial limiter and its effect on the temperature profile are analysed. Interpretation in terms of the perpendicular heat conductivity is also discussed. (author)

  8. 31 CFR 281.7 - Limitations.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Limitations. 281.7 Section 281.7 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL SERVICE, DEPARTMENT OF THE TREASURY FINANCIAL MANAGEMENT SERVICE FOREIGN EXCHANGE OPERATIONS § 281.7 Limitations. The...

  9. Beam limiter for thermonuclear fusion devices

    International Nuclear Information System (INIS)

    Kaminsky, M.S.

    1977-01-01

    The invention pertains to a beam limiter to prevent collisions between a plasma and the inner surface of a hollow body in which the plasma is confined. The patent claims pertain to suitable geometrical shapes of the beam limiter. (GG) [de

  10. Pushing the Limit: A Class Project

    Science.gov (United States)

    Odafe, Victor U.

    2012-01-01

    Instructors are constantly struggling to help students understand mathematical concepts as well as the relevance of mathematics to the real world. In calculus, students possess misconceptions of the limit concept. "Pushing the Limit" refers to a semester-long calculus class project that required students to read about, interview calculus…

  11. Should nuclear liability limits be removed. No

    International Nuclear Information System (INIS)

    Pape, E.C.

    1985-01-01

    The opposing view to the proposition that limits on nuclear liability under the Price-Anderson Act should be removed cites the historical recognition of the need to protect the public as it was defined in 1957. The limit on liability today is $630 million per nuclear incident, with total protection continuing to increase as new plants come on line and additional purchased insurance becomes available. The limit gives the industry an incentive to commit capital and technical resources to develop new technology. Removing the limit would increase costs, but not benefits, for electric consumers, and would require a new way to protect the public other than through purchased insurance or the utility's resources. The industry will support raising the limit, however

  12. Reverse engineering of inductive fault current limiters

    Energy Technology Data Exchange (ETDEWEB)

    Pina, J M; Neves, M Ventim; Rodrigues, A L [Centre of Technology and Systems Faculdade de Ciencias e Tecnologia, Nova University of Lisbon Monte de Caparica, 2829-516 Caparica (Portugal); Suarez, P; Alvarez, A, E-mail: jmmp@fct.unl.p [' Benito Mahedero' Group of Electrical Applications of Superconductors Escuela de IngenierIas Industrials, University of Extremadura Avenida de Elvas s/n, 06006 Badajoz (Spain)

    2010-06-01

    The inductive fault current limiter is less compact and harder to scale to high voltage networks than the resistive one. Nevertheless, its simple construction and mechanical robustness make it attractive in low voltage grids. Thus, it might be an enabling technology for the advent of microgrids, low voltage networks with dispersed generation, controllable loads and energy storage. A new methodology for reverse engineering of inductive fault current limiters based on the independent analysis of iron cores and HTS cylinders is presented in this paper. Their electromagnetic characteristics are used to predict the devices' hysteresis loops and consequently their dynamic behavior. Previous models based on the separate analysis of the limiters' components were already derived, e.g. in transformer like equivalent models. Nevertheless, the assumptions usually made may limit these models' application, as shown in the paper. The proposed methodology obviates these limitations. Results are validated through simulations.

  13. Determination of the Meteor Limiting Magnitude

    Science.gov (United States)

    Kingery, A.; Blaauw, R.; Cooke, W. J.

    2016-01-01

    The limiting meteor magnitude of a meteor camera system will depend on the camera hardware and software, sky conditions, and the location of the meteor radiant. Some of these factors are constants for a given meteor camera system, but many change between meteor shower or sporadic source and on both long and short timescales. Since the limiting meteor magnitude ultimately gets used to calculate the limiting meteor mass for a given data set, it is important to have an understanding of these factors and to monitor how they change throughout the night, as a 0.5 magnitude uncertainty in limiting magnitude translates to a uncertainty in limiting mass by a factor of two.

  14. Limiting law excess sum rule for polyelectrolytes.

    Science.gov (United States)

    Landy, Jonathan; Lee, YongJin; Jho, YongSeok

    2013-11-01

    We revisit the mean-field limiting law screening excess sum rule that holds for rodlike polyelectrolytes. We present an efficient derivation of this law that clarifies its region of applicability: The law holds in the limit of small polymer radius, measured relative to the Debye screening length. From the limiting law, we determine the individual ion excess values for single-salt electrolytes. We also consider the mean-field excess sum away from the limiting region, and we relate this quantity to the osmotic pressure of a dilute polyelectrolyte solution. Finally, we consider numerical simulations of many-body polymer-electrolyte solutions. We conclude that the limiting law often accurately describes the screening of physical charged polymers of interest, such as extended DNA.

  15. Reverse engineering of inductive fault current limiters

    International Nuclear Information System (INIS)

    Pina, J M; Neves, M Ventim; Rodrigues, A L; Suarez, P; Alvarez, A

    2010-01-01

    The inductive fault current limiter is less compact and harder to scale to high voltage networks than the resistive one. Nevertheless, its simple construction and mechanical robustness make it attractive in low voltage grids. Thus, it might be an enabling technology for the advent of microgrids, low voltage networks with dispersed generation, controllable loads and energy storage. A new methodology for reverse engineering of inductive fault current limiters based on the independent analysis of iron cores and HTS cylinders is presented in this paper. Their electromagnetic characteristics are used to predict the devices' hysteresis loops and consequently their dynamic behavior. Previous models based on the separate analysis of the limiters' components were already derived, e.g. in transformer like equivalent models. Nevertheless, the assumptions usually made may limit these models' application, as shown in the paper. The proposed methodology obviates these limitations. Results are validated through simulations.

  16. Self-triggering superconducting fault current limiter

    Science.gov (United States)

    Yuan, Xing [Albany, NY; Tekletsadik, Kasegn [Rexford, NY

    2008-10-21

    A modular and scaleable Matrix Fault Current Limiter (MFCL) that functions as a "variable impedance" device in an electric power network, using components made of superconducting and non-superconducting electrically conductive materials. The matrix fault current limiter comprises a fault current limiter module that includes a superconductor which is electrically coupled in parallel with a trigger coil, wherein the trigger coil is magnetically coupled to the superconductor. The current surge doing a fault within the electrical power network will cause the superconductor to transition to its resistive state and also generate a uniform magnetic field in the trigger coil and simultaneously limit the voltage developed across the superconductor. This results in fast and uniform quenching of the superconductors, significantly reduces the burnout risk associated with non-uniformity often existing within the volume of superconductor materials. The fault current limiter modules may be electrically coupled together to form various "n" (rows).times."m" (columns) matrix configurations.

  17. Anomalies and the Large N Limit

    International Nuclear Information System (INIS)

    Agarwal, A.; Akant, L.

    2003-01-01

    Operator algebra aspects of the Large N limit of Bosonic vector models are analyzed. It is shown that the Large N limit is a classical theory, and a general method, based on defromation quatization, for calculating the Poisson algebra of dynamical observables in the limiting classical theory is presented. The Poisson algebra of O(N) invariant observables of Bosonic vector models is constructed in this approach, and is shown to be a central extension of the Symplectic Lie algebra. The relation of the central term to anomalies is discussed. A comparision of the classical theories obtained in the Large N limit and that in the small (ℎ/2π) limit is also presented

  18. ITER Experts' meeting on density limits

    International Nuclear Information System (INIS)

    Borrass, K.; Igitkhanov, Y.L.; Uckan, N.A.

    1989-12-01

    The necessity of achieving a prescribed wall load or fusion power essentially determines the plasma pressure in a device like ITER. The range of operation densities and temperatures compatible with this condition is constrained by the problems of power exhaust and the disruptive density limit. The maximum allowable heat loads on the divertor plates and the maximum allowable sheath edge temperature practically impose a lower limit on the operating densities, whereas the disruptive density limit imposes an upper limit. For most of the density limit scalings proposed in the past an overlap of the two constraints or at best a very narrow accessible density range is predicted for ITER. Improved understanding of the underlying mechanisms is therefore a crucial issue in order to provide a more reliable basis for extrapolation to ITER and to identify possible ways of alleviating the problem

  19. ALT-I pump limiter experiments

    International Nuclear Information System (INIS)

    Goebel, D.M.; Conn, R.W.; Campbell, G.A.

    1987-09-01

    Results from the ALT-I pump limiter experiments in TEXTOR are presented. ALT-I has demonstrated control of the plasma density in a high recycling tokamak by pumping up to 15% of the core efflux. The closed pump limiter designs with restricted entrance geometries to reduce the backflow of neutral gas to the plasma remove over 50% of the ion flux incident on the collection slot. Up to 80% of the entrance ion flux is removed when the edge electron temperature is less than 10 eV and plasma-neutral gas interactions are minimized inside the limiter. Results from a 3-D Monte Carlo neutral gas transport code agree closely with these experimental results. The compound curvature of the head is found to distribute the heat over the surface as predicted in the original designs. Impurity removal experiments demonstrate that significant helium exhaust can be achieved with a pump limiter. During ohmic heating in TEXTOR, the energy and particle confinement times are proportional to the line averaged core density. With ICRH auxiliary heating, tau/sub E/ follow L-mode scaling independent of particle removal by the pump limiter. Pump limiter operation does not directly modify the SOL plasma density and electron temperature, but controls the core plasma density by changing the global recycling at the boundary. The global particle confinement, the particle flux to the limiter, and the edge electron temperature follow the changes in the core density and auxiliary heating power. 25 refs

  20. Physics considerations for the FED limiter

    International Nuclear Information System (INIS)

    Howe, H.C.

    1981-07-01

    The physics of the scrapeoff plasma and its interaction with a pumping limiter is reviewed. The governing equations for heat and particle transport in the scrapeoff are solved analytically with several simplifying assumptions. The assumed scrapeoff model is widely used and is presented here for completeness. From the solution, a shape for the limiter is derived which has a uniform heat loading on the front surface. The assumed crossfield transport coefficient is varied to examine the sensitivity of the heat loading to variations in plasma scrapeoff thickness. The heat flux to the limiter leading edge is an extremely sensitive function of variations in scrapeoff thickness, and we argue that uncertainties in the plasma crossfield transport preclude derivation of a believable limiter shape. We also discuss the problems involved with an edgeless, perforated limiter and with a global limiter. Finally, a solution is proposed using a flat-plate limiter with the heat flux to the leading edge controlled by major radius motion of the plasma

  1. Classical and sequential limit analysis revisited

    Science.gov (United States)

    Leblond, Jean-Baptiste; Kondo, Djimédo; Morin, Léo; Remmal, Almahdi

    2018-04-01

    Classical limit analysis applies to ideal plastic materials, and within a linearized geometrical framework implying small displacements and strains. Sequential limit analysis was proposed as a heuristic extension to materials exhibiting strain hardening, and within a fully general geometrical framework involving large displacements and strains. The purpose of this paper is to study and clearly state the precise conditions permitting such an extension. This is done by comparing the evolution equations of the full elastic-plastic problem, the equations of classical limit analysis, and those of sequential limit analysis. The main conclusion is that, whereas classical limit analysis applies to materials exhibiting elasticity - in the absence of hardening and within a linearized geometrical framework -, sequential limit analysis, to be applicable, strictly prohibits the presence of elasticity - although it tolerates strain hardening and large displacements and strains. For a given mechanical situation, the relevance of sequential limit analysis therefore essentially depends upon the importance of the elastic-plastic coupling in the specific case considered.

  2. Concentration and limit behaviors of stationary measures

    Science.gov (United States)

    Huang, Wen; Ji, Min; Liu, Zhenxin; Yi, Yingfei

    2018-04-01

    In this paper, we study limit behaviors of stationary measures of the Fokker-Planck equations associated with a system of ordinary differential equations perturbed by a class of multiplicative noise including additive white noise case. As the noises are vanishing, various results on the invariance and concentration of the limit measures are obtained. In particular, we show that if the noise perturbed systems admit a uniform Lyapunov function, then the stationary measures form a relatively sequentially compact set whose weak∗-limits are invariant measures of the unperturbed system concentrated on its global attractor. In the case that the global attractor contains a strong local attractor, we further show that there exists a family of admissible multiplicative noises with respect to which all limit measures are actually concentrated on the local attractor; and on the contrary, in the presence of a strong local repeller in the global attractor, there exists a family of admissible multiplicative noises with respect to which no limit measure can be concentrated on the local repeller. Moreover, we show that if there is a strongly repelling equilibrium in the global attractor, then limit measures with respect to typical families of multiplicative noises are always concentrated away from the equilibrium. As applications of these results, an example of stochastic Hopf bifurcation and an example with non-decomposable ω-limit sets are provided. Our study is closely related to the problem of noise stability of compact invariant sets and invariant measures of the unperturbed system.

  3. The limits on trypanosomatid morphological diversity.

    Directory of Open Access Journals (Sweden)

    Richard John Wheeler

    Full Text Available Cell shape is one, often overlooked, way in which protozoan parasites have adapted to a variety of host and vector environments and directional transmissions between these environments. Consequently, different parasite life cycle stages have characteristic morphologies. Trypanosomatid parasites are an excellent example of this in which large morphological variations between species and life cycle stage occur, despite sharing well-conserved cytoskeletal and membranous structures. Here, using previously published reports in the literature of the morphology of 248 isolates of trypanosomatid species from different hosts, we perform a meta-analysis of the occurrence and limits on morphological diversity of different classes of trypanosomatid morphology (trypomastigote, promastigote, etc. in the vertebrate bloodstream and invertebrate gut environments. We identified several limits on cell body length, cell body width and flagellum length diversity which can be interpreted as biomechanical limits on the capacity of the cell to attain particular dimensions. These limits differed for morphologies with and without a laterally attached flagellum which we suggest represent two morphological superclasses, the 'juxtaform' and 'liberform' superclasses. Further limits were identified consistent with a selective pressure from the mechanical properties of the vertebrate bloodstream environment; trypanosomatid size showed limits relative to host erythrocyte dimensions. This is the first comprehensive analysis of the limits of morphological diversity in any protozoan parasite, revealing the morphogenetic constraints and extrinsic selection pressures associated with the full diversity of trypanosomatid morphology.

  4. Alignment of the TFTR bumper limiter

    International Nuclear Information System (INIS)

    Barnes, G.W.; Owens, D.K.; Loesser, G.D.; Ulrickson, M.

    1989-01-01

    The TFTR Bumper Limiter (BL) is an axisymmetric toroidal limiter mounted on the inner wall of the vacuum vessel. It subtends 120 degree poloidally and has a surface area of 22 m 2 . The plasma facing surface consists of 1,000 kg of graphite tiles mounted on watercooled Inconel backing plates. During the initial installation in the Spring of 1985, the limiter surface was aligned to the toroidal magnetic field by mechanical and magnetic measurements to an estimated accuracy of ±2 mm. During subsequent operation, especially in the 1988 run period in which 30 MW of Neutral Beam Injection routinely occurred, several tiles at points on the limiter which protruded slightly into the plasma were severely damaged. The damage, cracked and spalled tiles, is believed to be initiated by high energy disruptions and aggravated by normal high power operation. The damage pattern and temperature rise during normal operation are consistent with this interpretation. A vacuum vessel opening to replace the damaged tiles and realign the limiter was required. The bumper limiter was reshaped to be circular to ±0.5 mm at the midplane by means of mechanical measurements in order to better distribute the heat loads and eliminate hot spots. The ±0.5 mm accuracy is determined by the variation in individual tile thickness which is ±0.5 mm. This paper describes the methods used to mechanically align the limiter and presents evidence based on machine operation with plasma that the limiter is reasonably well aligned with the toroidal field. Future work dealing with the alignment of the total limiter to the toroidal field using mechanical and magnetic measurements and the replacement of a subset of the carbon tiles with carbon-carbon composite material is also discussed. 7 refs., 4 figs

  5. Multidimensional flux-limited advection schemes

    International Nuclear Information System (INIS)

    Thuburn, J.

    1996-01-01

    A general method for building multidimensional shape preserving advection schemes using flux limiters is presented. The method works for advected passive scalars in either compressible or incompressible flow and on arbitrary grids. With a minor modification it can be applied to the equation for fluid density. Schemes using the simplest form of the flux limiter can cause distortion of the advected profile, particularly sideways spreading, depending on the orientation of the flow relative to the grid. This is partly because the simple limiter is too restrictive. However, some straightforward refinements lead to a shape-preserving scheme that gives satisfactory results, with negligible grid-flow angle-dependent distortion

  6. Establishment of limits of detection and decision

    International Nuclear Information System (INIS)

    Mende, O.; Michel, R.

    1995-01-01

    The purpose of this project was to develop and test procedures to establish limits of decision and detection for spectrometric nuclear radiation measurements. Beside the determination of the limits of application of DIN 25482 part 2 and 5 - both primarily suitable for high resoluted spectra areas -the statistical model was expanded in such a way that henceforth blanks and influences of sample treatment can also be taken into account; the corresponding procedures to calculate the limits of decision and detection have a high precision. Additional procedures of calculation were developed to take the special characteristics of the analysis of complex spectra areas into account. (orig.) [de

  7. Extreme Physics and Informational/Computational Limits

    Energy Technology Data Exchange (ETDEWEB)

    Di Sia, Paolo, E-mail: paolo.disia@univr.it, E-mail: 10alla33@virgilio.it [Department of Computer Science, Faculty of Science, Verona University, Strada Le Grazie 15, I-37134 Verona (Italy) and Faculty of Computer Science, Free University of Bozen, Piazza Domenicani 3, I-39100 Bozen-Bolzano (Italy)

    2011-07-08

    A sector of the current theoretical physics, even called 'extreme physics', deals with topics concerning superstring theories, multiverse, quantum teleportation, negative energy, and more, that only few years ago were considered scientific imaginations or purely speculative physics. Present experimental lines of evidence and implications of cosmological observations seem on the contrary support such theories. These new physical developments lead to informational limits, as the quantity of information, that a physical system can record, and computational limits, resulting from considerations regarding black holes and space-time fluctuations. In this paper I consider important limits for information and computation resulting in particular from string theories and its foundations.

  8. Extreme Physics and Informational/Computational Limits

    International Nuclear Information System (INIS)

    Di Sia, Paolo

    2011-01-01

    A sector of the current theoretical physics, even called 'extreme physics', deals with topics concerning superstring theories, multiverse, quantum teleportation, negative energy, and more, that only few years ago were considered scientific imaginations or purely speculative physics. Present experimental lines of evidence and implications of cosmological observations seem on the contrary support such theories. These new physical developments lead to informational limits, as the quantity of information, that a physical system can record, and computational limits, resulting from considerations regarding black holes and space-time fluctuations. In this paper I consider important limits for information and computation resulting in particular from string theories and its foundations.

  9. Smooth massless limit of field theories

    International Nuclear Information System (INIS)

    Fronsdal, C.

    1980-01-01

    The massless limit of Fierz-Pauli field theories, describing fields with fixed mass and spin interacting with external sources, is examined. Results are obtained for spins, 1, 3/2, 2 and 3 using conventional models, and then for all half-integral spins in a relatively model-independent manner. It is found that the massless limit is smooth provided that the sources satisfy certain conditions. In the massless limit these conditions reduce to the conservation laws required by internal consistency of massless field theory. Smoothness simply requires that quantities that vanish in the massless case approach zero in a certain well-defined manner. (orig.)

  10. Electrical characteristics of an ideal tokamak limiter

    International Nuclear Information System (INIS)

    Motley, R.W.

    1981-01-01

    The intrusion of an equipotential poloidal limiter into the edge plasma of a circular tokamak discharge distorts the axisymmetry in several ways: (1) it (partially) shorts out the top-to-bottom Pfirsch-Schlueter potentials, (2) it creates zones of reversed equilibrium current flow into the limiter, and (3) it generates an electrostatic field opposing the loop current. The resulting boundary mismatch between the outer layers and the inner axisymmetric Pfirsch-Schlueter layer increases the free energy available to drive the edge plasma unstable. A number of special limiters are proposed to symmetrize the edge plasma and thereby reduce the electrical and MHD activity in the boundary layer. (author)

  11. Fractional Diffusion Limit for Collisional Kinetic Equations

    KAUST Repository

    Mellet, Antoine

    2010-08-20

    This paper is devoted to diffusion limits of linear Boltzmann equations. When the equilibrium distribution function is a Maxwellian distribution, it is well known that for an appropriate time scale, the small mean free path limit gives rise to a diffusion equation. In this paper, we consider situations in which the equilibrium distribution function is a heavy-tailed distribution with infinite variance. We then show that for an appropriate time scale, the small mean free path limit gives rise to a fractional diffusion equation. © 2010 Springer-Verlag.

  12. 41 CFR 109-50.204 - Limitations.

    Science.gov (United States)

    2010-07-01

    ... DISPOSAL AUTHORITIES 50.2-Math and Science Equipment Gift Program § 109-50.204 Limitations. (a) Excess and... (or unlimited) level of authority. (d) Gifts shall be serviceable and in working order. Disposal...

  13. Bohmian measures and their classical limit

    KAUST Repository

    Markowich, Peter; Paul, Thierry; Sparber, Christof

    2010-01-01

    We consider a class of phase space measures, which naturally arise in the Bohmian interpretation of quantum mechanics. We study the classical limit of these so-called Bohmian measures, in dependence on the scale of oscillations and concentrations

  14. 14 CFR 183.55 - Limitations.

    Science.gov (United States)

    2010-01-01

    ... REGULATIONS REPRESENTATIVES OF THE ADMINISTRATOR Organization Designation Authorization § 183.55 Limitations... structure), no Unit member may perform that function until the Administrator is notified of the change, and...

  15. Space-charge limits in linear accelerators

    International Nuclear Information System (INIS)

    Wangler, T.P.

    1980-12-01

    This report presents equations that allow an approximate evaluation of the limiting beam current for a large class of radio-frequency linear accelerators, which use quadrupole strong focusing. Included are the Alvarez, the Wideroe, and the radio-frequency quadrupole linacs. The limiting-current formulas are presented for both the longitudinal and the transverse degrees of freedom by assuming that the average space-charge force in the beam bunch arises from a uniformly distributed charge within an azimuthally symmetric three-dimensional ellipsoid. The Mathieu equation is obtained as an approximate, but general, form for the transverse equation of motion. The smooth-approximation method is used to obtain a solution and an expression for the transverse current limit. The form of the current-limit formulas for different linac constraints is discussed

  16. The limitation of radioactive wastes from hospitals

    International Nuclear Information System (INIS)

    Schuurman, B.; IJtsma, D.; Zwigt, A.

    1987-01-01

    Interviews were made with radiation experts working at hospitals about the treatment and limiting of radioactive wastes. The authors conclude that with the aid of hospital personnel a decrease of the volume of radioactive waste is possible. 25 refs

  17. Matrix model calculations beyond the spherical limit

    International Nuclear Information System (INIS)

    Ambjoern, J.; Chekhov, L.; Kristjansen, C.F.; Makeenko, Yu.

    1993-01-01

    We propose an improved iterative scheme for calculating higher genus contributions to the multi-loop (or multi-point) correlators and the partition function of the hermitian one matrix model. We present explicit results up to genus two. We develop a version which gives directly the result in the double scaling limit and present explicit results up to genus four. Using the latter version we prove that the hermitian and the complex matrix model are equivalent in the double scaling limit and that in this limit they are both equivalent to the Kontsevich model. We discuss how our results away from the double scaling limit are related to the structure of moduli space. (orig.)

  18. 48 CFR 46.705 - Limitations.

    Science.gov (United States)

    2010-10-01

    ... QUALITY ASSURANCE Warranties 46.705 Limitations. (a) Except for the warranties in the clauses at 52.246-3, Inspection of Supplies—Cost-Reimbursement, and 52.246-8, Inspection of Research and Development—Cost...

  19. Rural variable speed limits : phase II.

    Science.gov (United States)

    2012-05-01

    The Wyoming Department of Transportation (WYDOT) installed its first variable speed limit (VSL) corridor along : Interstate 80 in the Elk Mountain Corridor in the Spring of 2009 in an effort to improve safety and reduce road closures, : particularly ...

  20. First pump limiter experiments in Tore Supra

    International Nuclear Information System (INIS)

    Chatelier, M.; Bruneau, J.L.; Chappuis, P.; Gil, C.; Guilhem, D.; Lipa, M.; Rodriguez, L.; Vallet, J.C.; Van Houtte, D.; Watkins, J.G.

    1989-01-01

    The thermal load and the particle pumping effects on the outboard pump limiters (OPL), in Tore Supra are analyzed. The investigations are performed for the plasma either in contact with the OPL/ONPL (outboard non pumped limiters) alone or with the OPL and the vertical limiters together. Calorimetric measurements provide estimates of the time-integrated balance of the energy flow at the plasma edge. Radiated and charge exchange energy losses are deduced from the inner vessel calorimetry (R=242cm, a=94cm). Conductive/convective losses on the OPL and vertical (top and bottom) limiters are independently measured, as well as the integrated energy flow on the ergodic divertors. The calorimetric results, the bolometric measurements of the radiated power and the Ohmic power estimates, are indicated. The central line density from interferometric measurement for the two successive shots, with the ONPL and with the OPL, are given

  1. Noncommuting limits of oscillator wave functions

    International Nuclear Information System (INIS)

    Daboul, J.; Pogosyan, G. S.; Wolf, K. B.

    2007-01-01

    Quantum harmonic oscillators with spring constants k > 0 plus constant forces f exhibit rescaled and displaced Hermite-Gaussian wave functions, and discrete, lower bound spectra. We examine their limits when (k, f) → (0, 0) along two different paths. When f → 0 and then k → 0, the contraction is standard: the system becomes free with a double continuous, positive spectrum, and the wave functions limit to plane waves of definite parity. On the other hand, when k → 0 first, the contraction path passes through the free-fall system, with a continuous, nondegenerate, unbounded spectrum and displaced Airy wave functions, while parity is lost. The subsequent f → 0 limit of the nonstandard path shows the dc hysteresis phenomenon of noncommuting contractions: the lost parity reappears as an infinitely oscillating superposition of the two limiting solutions that are related by the symmetry

  2. Classical limit for semirelativistic Hartree systems

    KAUST Repository

    Aki, Gonca L.; Markowich, Peter A.; Sparber, Christof

    2008-01-01

    Wigner transformation techniques that its classical limit yields the well known relativistic Vlasov-Poisson system. The result holds for the case of attractive and repulsive mean-field interactions, with an additional size constraint in the attractive

  3. Elastic stability and the limit of strength

    International Nuclear Information System (INIS)

    Morris Jr., J.W.; Krenn, C.R.; Roundy, D.; Cohen, Marvin L.

    2002-01-01

    The upper limit of strength (the ''theoretical strength'') has been an active subject of research and speculation for the better part of a century. The subject has recently become important, for two reasons. First, given recent advances in ab initio techniques and computing machines, the limits of strength can be calculated with considerable accuracy, making this one of the very few problems in mechanical behavior that can actually be solved. Second, given recent advances in materials engineering, the limits of strength are being approached in some systems, such as hardened or defect-free films, and their relevance is becoming recognized in others. The present paper discusses some interesting results from recent research on the limits of strength, with an intermixture of speculations based on those results. Topics include the inherent nature of {100} cleavage and ''pencil slip'' in bcc metals, the inherent ductility of fcc metals, the anomalous properties of Al, and the possibility of measuring ideal strength with nanoindentation

  4. Limitations of science and adaptive management

    OpenAIRE

    Narasimhan, T.N.

    2001-01-01

    Adaptive management consists in patterning human sustenance within the constraints of Earth and biological systems whose behavior is inherently uncertain and difficult to control. For successful adaptive management, a mind-set recognizing the limitations of science is needed.

  5. Analysis of performance limitations for superconducting cavities

    International Nuclear Information System (INIS)

    J. R. Delayen; L. R. Doolittle; C. E. Reece

    1998-01-01

    The performance of superconducting cavities in accelerators can be limited by several factors, such as: field emission, quenches, arcing, rf power; and the maximum gradient at which a cavity can operate will be determined by the lowest of these limitations for that particular cavity. The CEBAF accelerator operates with over 300 cavities and, for each of them, the authors have determined the maximum operating gradient and its limiting factor. They have developed a model that allows them to determine the distribution of gradients that could be achieved for each of these limitations independently of the others. The result of this analysis can guide an R and D program to achieve the best overall performance improvement. The same model can be used to relate the performance of single-cell and multi-cell cavities

  6. Beam limiter for thermonuclear fusion devices

    International Nuclear Information System (INIS)

    Kaminsky, M.S.

    1976-01-01

    A beam limiter circumscribes the interior surface of a vacuum vessel to inhibit collisions of contained plasma and the vessel walls. The cross section of the material making up the limiter has a flatsided or slightly concave portion of increased width towards the plasma and portions of decreased width towards the interior surface of the vessel. This configuration is designed to prevent a major fraction of the material sputtered, vaporized and blistered from the limiter from reaching the plasma. It also allows adequate heat transfer from the wider to the narrower portions. The preferred materials for the beam limiter are solids of sintered, particulate materials of low atomic number with low vapor pressure and low sputtering and blistering yields. 7 claims, 3 figures

  7. Foods to Avoid or Limit during Pregnancy

    Science.gov (United States)

    ... Global Map Premature Birth Report Cards Careers Archives Pregnancy Before or between pregnancies Nutrition, weight & fitness Prenatal ... during pregnancy Foods to avoid or limit during pregnancy E-mail to a friend Please fill in ...

  8. HELIOS: Application for criticality limits assessment

    International Nuclear Information System (INIS)

    Simeonov, T.

    2011-01-01

    In the early years, after the discovery of fission, the criticality safety assessment and the established safety limits, have been mainly based on direct experiments. Later, following the advances in the theory, computational methods and computer hardware, theoretical methods have been elaborated to the level to become reliable assessment tools. The computer codes started replacing the experiments, while the experimental data became a valuable validation source for their models. An application of the two-dimensional transport theory code HELIOS for assessment of criticality limits is presented in this paper. The effect of the enrichment, the system dimensions, H/U5 ration and different reflectors were studied in heterogeneous and homogenized systems. Comparisons with published experimental data and evaluated safety limits are made here to demonstrate the range of HELIOS applicability and limitations. (Author)

  9. On Prohorov's criterion for projective limits

    NARCIS (Netherlands)

    Thomas, Erik G. F.; Koelink, E; VanNeerven, J; DePagter, B; Sweers, G

    2006-01-01

    We propose a modification of Prohorov's theorem on projective limits of Radon measures which can be directly applied to the construction of Wiener measure on the space of continuous functions, and we give such a construction.(1)

  10. The classical limit of W-algebras

    International Nuclear Information System (INIS)

    Figueroa-O'Farrill, J.M.; Ramos, E.

    1992-01-01

    We define and compute explicitly the classical limit of the realizations of W n appearing as hamiltonian structures of generalized KdV hierarchies. The classical limit is obtained by taking the commutative limit of the ring of pseudodifferential operators. These algebras - denoted w n - have free field realizations in which the generators are given by the elementary symmetric polynomials in the free fields. We compute the algebras explicitly and we show that they are all reductions of a new algebra w KP , which is proposed as the universal classical W-algebra for the w n series. As a deformation of this algebra we also obtain w 1+∞ , the classical limit of W 1+∞ . (orig.)

  11. Southern Hemisphere Ice Limits, 1973-1978

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Weekly Southern Ocean ice limits, have been digitized from U.S. Navy Fleet Weather Facility ice charts, at the Max-Planck Institut fur Meteorologie, Hamburg....

  12. Stable convergence and stable limit theorems

    CERN Document Server

    Häusler, Erich

    2015-01-01

    The authors present a concise but complete exposition of the mathematical theory of stable convergence and give various applications in different areas of probability theory and mathematical statistics to illustrate the usefulness of this concept. Stable convergence holds in many limit theorems of probability theory and statistics – such as the classical central limit theorem – which are usually formulated in terms of convergence in distribution. Originated by Alfred Rényi, the notion of stable convergence is stronger than the classical weak convergence of probability measures. A variety of methods is described which can be used to establish this stronger stable convergence in many limit theorems which were originally formulated only in terms of weak convergence. Naturally, these stronger limit theorems have new and stronger consequences which should not be missed by neglecting the notion of stable convergence. The presentation will be accessible to researchers and advanced students at the master's level...

  13. Nutrient Limitation in Central Red Sea Mangroves

    KAUST Repository

    Almahasheer, Hanan; Duarte, Carlos M.; Irigoien, Xabier

    2016-01-01

    Red Sea have characteristic heights of ~2 m, suggesting nutrient limitation. We assessed the nutrient status of mangrove stands in the Central Red Sea and conducted a fertilization experiment (N, P and Fe and various combinations thereof) on 4-week

  14. Asymptotic limits of a statistical transport description

    International Nuclear Information System (INIS)

    Malvagi, F.; Levermore, C.D.; Pomraning, G.C.; Department of Mathematics, University of Arizona, Tucson, AZ 85721)

    1989-01-01

    We consider three different asymptotic limits of a model describing linear particle transport in a stochastic medium consisting of two randomly mixed immiscible fluids. These three limits are: (1) the fluid packets are small compared to the particle mean free path in the packet; (2) a small amount of large cross section fluid is admixed with a large amount of small cross section fluid; and (3) the angular dependence of the intensity (angular flux) is nearly isotropic. The first two limits reduce the underlying model, which consists of two coupled transport equations, to a single transport equation of the usual form. The third limit yields a two-equation diffusion approximation, and a boundary layer analysis gives boundary conditions for these two coupled diffusion equations

  15. Scallop License Limitation Program (SLLP) Permit Program

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A federal Scallop License Limitation Program (SLLP) license is required onboard any vessel deployed in scallop fisheries in Federal waters off Alaska (except for...

  16. Health Outcomes Survey - Limited Data Set

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Medicare Health Outcomes Survey (HOS) limited data sets (LDS) are comprised of the entire national sample for a given 2-year cohort (including both respondents...

  17. Limiting effects in double EEX beamline

    Science.gov (United States)

    Ha, G.; Power, J. G.; Conde, M.; Doran, D. S.; Gai, W.

    2017-07-01

    The double emittance exchange (EEX) beamline is suggested to overcome the large horizontal emittance and transverse jitter issues associated with the single EEX beamline while preserving its powerful phase-space manipulation capability. However, the double EEX beamline also has potential limitations due to coherent synchrotron radiation (CSR) and transverse jitter. The former limitation arises because double EEX uses twice as many bending magnets as single EEX which means stronger CSR effects degrading the beam quality. The latter limitation arises because a longitudinal jitter in front of the first EEX beamline is converted into a transverse jitter in the middle section (between the EEX beamlines) which can cause beam loss or beam degradation. In this paper, we numerically explore the effects of these two limitations on the emittance and beam transport.

  18. Limiting effects in double EEX beamline

    International Nuclear Information System (INIS)

    Ha, G; Power, J G; Conde, M; Doran, D S; Gai, W

    2017-01-01

    The double emittance exchange (EEX) beamline is suggested to overcome the large horizontal emittance and transverse jitter issues associated with the single EEX beamline while preserving its powerful phase-space manipulation capability. However, the double EEX beamline also has potential limitations due to coherent synchrotron radiation (CSR) and transverse jitter. The former limitation arises because double EEX uses twice as many bending magnets as single EEX which means stronger CSR effects degrading the beam quality. The latter limitation arises because a longitudinal jitter in front of the first EEX beamline is converted into a transverse jitter in the middle section (between the EEX beamlines) which can cause beam loss or beam degradation. In this paper, we numerically explore the effects of these two limitations on the emittance and beam transport. (paper)

  19. 48 CFR 817.402 - Limitations.

    Science.gov (United States)

    2010-10-01

    ... AND CONTRACT TYPES SPECIAL CONTRACTING METHODS Leader Company Contracting 817.402 Limitations. (a... company contracts. (b) The DSPE may designate a contracting officer to enter into a leader company...

  20. 7 CFR 3560.612 - Loan limits.

    Science.gov (United States)

    2010-01-01

    ... DIRECT MULTI-FAMILY HOUSING LOANS AND GRANTS On-Farm Labor Housing § 3560.612 Loan limits. The maximum loan amount will be 100 percent of the allowable total development costs of on-farm labor housing and...

  1. Recognizing limitations in eddy current testing

    International Nuclear Information System (INIS)

    Van Drunen, G.; Cecco, V.S.

    1981-11-01

    This paper addresses known limitations and constraints in eddy current nondestructive testing. Incomplete appreciation for eddy current limitations is believed to have contributed to both under-utilization and misapplication of the technique. Neither situation need arise if known limitations are recognized. Some, such as the skin depth effect, are inherent to electromagnetic test methods and define the role of eddy current testing. Others can be overcome with available technology such as surface probes to find circumferential cracks in tubes and magnetic saturation of ferromagnetic alloys to eliminate permeability effects. The variables responsible for limitations in eddy current testing are discussed and where alternative approaches exist, these are presented. Areas with potential for further research and development are also identified

  2. MHD stability, operational limits and disruptions

    International Nuclear Information System (INIS)

    1999-01-01

    The present physics understandings of magnetohydrodynamic (MHD) stability of tokamak plasmas, the threshold conditions for onset of MHD instability, and the resulting operational limits on attainable plasma pressure (beta limit) and density (density limit), and the consequences of plasma disruption and disruption related effects are reviewed and assessed in the context of their application to a future DT burning reactor prototype tokamak experiment such as ITER. The principal considerations covered within the MHD stability and beta limit assessments are (i) magnetostatic equilibrium, ideal MHD stability and the resulting ideal MHD beta limit; (ii) sawtooth oscillations and the coupling of sawtooth activity to other types of MHD instability; (iii) neoclassical island resistive tearing modes and the corresponding limits on beta and energy confinement; (iv) wall stabilization of ideal MHD instabilities and resistive wall instabilities; (v) mode locking effects of non-axisymmetric error fields; (vi) edge localized MHD instabilities (ELMs, etc.); and (vii) MHD instabilities and beta/pressure gradient limits in plasmas with actively modified current and magnetic shear profiles. The principal considerations covered within the density limit assessments are (i) empirical density limits; (ii) edge power balance/radiative density limits in ohmic and L-mode plasmas; and (iii) edge parameter related density limits in H-mode plasmas. The principal considerations covered in the disruption assessments are (i) disruption causes, frequency and MHD instability onset; (ii) disruption thermal and current quench characteristics; (iii) vertical instabilities (VDEs), both before and after disruption, and plasma and in-vessel halo currents; (iv) after disruption runaway electron formation, confinement and loss; (v) fast plasma shutdown (rapid externally initiated dissipation of plasma thermal and magnetic energies); (vi) means for disruption avoidance and disruption effect mitigation; and

  3. The separate universe approach to soft limits

    Energy Technology Data Exchange (ETDEWEB)

    Kenton, Zachary; Mulryne, David J., E-mail: z.a.kenton@qmul.ac.uk, E-mail: d.mulryne@qmul.ac.uk [School of Physics and Astronomy, Queen Mary University of London, Mile End Road, London, E1 4NS (United Kingdom)

    2016-10-01

    We develop a formalism for calculating soft limits of n -point inflationary correlation functions using separate universe techniques. Our method naturally allows for multiple fields and leads to an elegant diagrammatic approach. As an application we focus on the trispectrum produced by inflation with multiple light fields, giving explicit formulae for all possible single- and double-soft limits. We also investigate consistency relations and present an infinite tower of inequalities between soft correlation functions which generalise the Suyama-Yamaguchi inequality.

  4. Theoretical Prediction of the Forming Limit Band

    International Nuclear Information System (INIS)

    Banabic, D.; Paraianu, L.; Vos, M.; Jurco, P.

    2007-01-01

    Forming Limit Band (FLB) is a very useful tool to improve the sheet metal forming simulation robustness. Until now, the study of the FLB was only experimental. This paper presents the first attempt to model the FLB. The authors have established an original method for predicting the two margins of the limit band. The method was illustrated on the AA6111-T43 aluminum alloy. A good agreement with the experiments has been obtained

  5. Theoretical Prediction of the Forming Limit Band

    Science.gov (United States)

    Banabic, D.; Vos, M.; Paraianu, L.; Jurco, P.

    2007-04-01

    Forming Limit Band (FLB) is a very useful tool to improve the sheet metal forming simulation robustness. Until now, the study of the FLB was only experimental. This paper presents the first attempt to model the FLB. The authors have established an original method for predicting the two margins of the limit band. The method was illustrated on the AA6111-T43 aluminum alloy. A good agreement with the experiments has been obtained.

  6. Gulf of Mexico mud toxicity limitations

    Energy Technology Data Exchange (ETDEWEB)

    Dunn, H.E.; Beardmore, D.H. (Phillips Petroleum Co., Bartlesville, OK (USA)); Stewart, W.S. (Drilling Specialties Co. (US))

    1989-10-01

    Because of the Environmental Protection Agency's recent toxicity limits on drilling mud discharges for offshore Gulf of Mexico, Phillips Petroleum conducted a mud toxicity study based on both field and lab tests. The study, discussed in this article, found the polyanionic cellulose-sulfomethylated quebracho-chrome lignosulfonate mud Phillips had been using would comfortably pass the toxicity limitations. The study also found barite and thinners were of low toxicity, and hydrocarbons and surfactants were highly toxic.

  7. Semiclassical limit of the FZZT Liouville theory

    International Nuclear Information System (INIS)

    Hadasz, Leszek; Jaskolski, Zbigniew

    2006-01-01

    The semiclassical limit of the FZZT Liouville theory on the upper half plane with bulk operators of arbitrary type and with elliptic boundary operators is analyzed. We prove the Polyakov conjecture for an appropriate classical Liouville action. This action is calculated in a number of cases: One bulk operator of arbitrary type, one bulk and one boundary, and two boundary elliptic operators. The results are in agreement with the classical limits of the corresponding quantum correlators

  8. Semiclassical limit of the FZZT Liouville theory

    Science.gov (United States)

    Hadasz, Leszek; Jaskólski, Zbigniew

    2006-11-01

    The semiclassical limit of the FZZT Liouville theory on the upper half plane with bulk operators of arbitrary type and with elliptic boundary operators is analyzed. We prove the Polyakov conjecture for an appropriate classical Liouville action. This action is calculated in a number of cases: One bulk operator of arbitrary type, one bulk and one boundary, and two boundary elliptic operators. The results are in agreement with the classical limits of the corresponding quantum correlators.

  9. Semiclassical limit of the FZZT Liouville theory

    OpenAIRE

    Hadasz, Leszek; Jaskolski, Zbigniew

    2006-01-01

    The semiclassical limit of the FZZT Liouville theory on the upper half plane with bulk operators of arbitrary type and with elliptic boundary operators is analyzed. We prove the Polyakov conjecture for an appropriate classical Liouville action. This action is calculated in a number of cases: one bulk operator of arbitrary type, one bulk and one boundary, and two boundary elliptic operators. The results are in agreement with the classical limits of the corresponding quantum correlators.

  10. Semiclassical limit of the FZZT Liouville theory

    Energy Technology Data Exchange (ETDEWEB)

    Hadasz, Leszek [Physikalisches Institut, Rheinische Friedrich-Wilhelms-Universitaet, Nussallee 12, 53115 Bonn (Germany); M. Smoluchowski Institute of Physics, Jagiellonian University, W. Reymonta 4, 30-059 Cracow (Poland)]. E-mail: hadasz@th.if.uj.edu.pl; Jaskolski, Zbigniew [Institute of Theoretical Physics, University of Wroclaw, pl. M. Borna 9, 50-204 Wroclaw (Poland)]. E-mail: jask@ift.uni.wroc.pl

    2006-11-27

    The semiclassical limit of the FZZT Liouville theory on the upper half plane with bulk operators of arbitrary type and with elliptic boundary operators is analyzed. We prove the Polyakov conjecture for an appropriate classical Liouville action. This action is calculated in a number of cases: One bulk operator of arbitrary type, one bulk and one boundary, and two boundary elliptic operators. The results are in agreement with the classical limits of the corresponding quantum correlators.

  11. Mass limits for the muon neutrino

    International Nuclear Information System (INIS)

    Hoffman, C.M.; Sandberg, V.D.

    1982-01-01

    The possibility of improving the present limit on the mass of the muon neutrino is discussed. It is found that decays of muons and pions are not useful means to significantly improve this limit. On the other hand, the decays K 0 /sub L/ → π/sup +-/μ/sup -+/nu/sub μ/ and K + → π 0 μ + nu/sub μ/ appear to be quite promising. Possible experiments are discussed

  12. Loop quantization as a continuum limit

    International Nuclear Information System (INIS)

    Manrique, Elisa; Oeckl, Robert; Weber, Axel; Zapata, Jose A

    2006-01-01

    We present an implementation of Wilson's renormalization group and a continuum limit tailored for loop quantization. The dynamics of loop-quantized theories is constructed as a continuum limit of the dynamics of effective theories. After presenting the general formalism we show as a first explicit example the 2D Ising field theory, an interacting relativistic quantum field theory with local degrees of freedom quantized by loop quantization techniques

  13. Supply and demand law under limited information

    OpenAIRE

    Zhang, Yi-Cheng

    2005-01-01

    We present a model for the supply-demand law with quality and limited information capability. We postulate that imperfect information permeates in almost all economic transactions to varying degrees. Through a simple model we outline a research agenda that re-examines many standard issues in economics. Our analysis shows that whereas imperfect information can be improved, it leads to new uncertainties so that the perfect information limit can never be reached. As a corollary neoclassical perf...

  14. Computer modelling of superconductive fault current limiters

    Energy Technology Data Exchange (ETDEWEB)

    Weller, R.A.; Campbell, A.M.; Coombs, T.A.; Cardwell, D.A.; Storey, R.J. [Cambridge Univ. (United Kingdom). Interdisciplinary Research Centre in Superconductivity (IRC); Hancox, J. [Rolls Royce, Applied Science Division, Derby (United Kingdom)

    1998-05-01

    Investigations are being carried out on the use of superconductors for fault current limiting applications. A number of computer programs are being developed to predict the behavior of different `resistive` fault current limiter designs under a variety of fault conditions. The programs achieve solution by iterative methods based around real measured data rather than theoretical models in order to achieve accuracy at high current densities. (orig.) 5 refs.

  15. Inviscid incompressible limits on expanding domains

    Czech Academy of Sciences Publication Activity Database

    Feireisl, Eduard; Nečasová, Šárka; Sun, Y.

    2014-01-01

    Roč. 27, č. 10 (2014), s. 2465-2477 ISSN 0951-7715 R&D Projects: GA ČR GA13-00522S Institutional support: RVO:67985840 Keywords : compressible Navier-Stokes system * large domain * inviscid limit * incompressible limit Subject RIV: BA - General Mathematics Impact factor: 1.208, year: 2014 http://iopscience.iop.org/0951-7715/27/10/2465/

  16. Altitudinal distribution limits of aquatic macroinvertebrates

    DEFF Research Database (Denmark)

    Madsen, Philip B.; Morabowen, Andrés; Andino, Patricio

    2015-01-01

    1. Temperature and oxygen are recognised as the main drivers of altitudinal limits of species distributions. However, the two factors are linked, and both decrease with altitude, why their effects are difficult to disentangle. 2. This was experimentally addressed using aquatic macroinvertebrates...... relatively small differences in temperature and oxygen may produce effects explaining ecological patterns, and depending on the taxon, either water temperature or oxygen saturation, without clear interacting effects, are important drivers of altitudinal limits....

  17. Limits and signatures of relativistic spaceflight

    Science.gov (United States)

    Yurtsever, Ulvi; Wilkinson, Steven

    2018-01-01

    While special relativity imposes an absolute speed limit at the speed of light, our Universe is not empty Minkowski spacetime. The constituents that fill the interstellar/intergalactic vacuum, including the cosmic microwave background photons, impose a lower speed limit on any object travelling at relativistic velocities. Scattering of cosmic microwave photons from an ultra-relativistic object may create radiation with a characteristic signature allowing the detection of such objects at large distances.

  18. Hayflick, his limit, and cellular ageing.

    Science.gov (United States)

    Shay, J W; Wright, W E

    2000-10-01

    Almost 40 years ago, Leonard Hayflick discovered that cultured normal human cells have limited capacity to divide, after which they become senescent -- a phenomenon now known as the 'Hayflick limit'. Hayflick's findings were strongly challenged at the time, and continue to be questioned in a few circles, but his achievements have enabled others to make considerable progress towards understanding and manipulating the molecular mechanisms of ageing.

  19. Limiting currents of overcompensated electron beams

    International Nuclear Information System (INIS)

    Malafaev, V.A.

    1990-01-01

    A possibility of producing recompensated electron beam and increasing its limiting currents in the magnetic field is experimentally investigated. It is shown that such a possibility is realized when the beam is surrounded by a cylindrical net placed into the tube located under the positive potential relative to the net. In this case an increase of limiting current at the expense of increasing the ion life time, takes place. Current, exceeding the Pierce threshold 1.5 times, is obtained

  20. Window in the dark matter exclusion limits

    International Nuclear Information System (INIS)

    Zaharijas, Gabrijela; Farrar, Glennys R.

    2005-01-01

    We consider the cross section limits for light dark matter cadnidates (m=0.4 to 10 GeV). We calculate the interaction of dark matter in the crust above underground dark matter detectors and find that in the intermediate cross section range, the energy loss of dark matter is sufficient to fall below the energy threshold of current underground experiments. This implies the existence of a window in the dark matter exclusion limits in the micro-barn range

  1. Physical limits of silicon transistors and circuits

    International Nuclear Information System (INIS)

    Keyes, Robert W

    2005-01-01

    A discussion on transistors and electronic computing including some history introduces semiconductor devices and the motivation for miniaturization of transistors. The changing physics of field-effect transistors and ways to mitigate the deterioration in performance caused by the changes follows. The limits of transistors are tied to the requirements of the chips that carry them and the difficulties of fabricating very small structures. Some concluding remarks about transistors and limits are presented

  2. A lattice hierarchy and its continuous limits

    International Nuclear Information System (INIS)

    Fan Engui

    2008-01-01

    By introducing a discrete spectral problem, we derive a lattice hierarchy which is integrable in Liouville's sense and possesses a multi-Hamiltonian structure. It is show that the discrete spectral problem converges to the well-known AKNS spectral problem under a certain continuous limit. In particular, we construct a sequence of equations in the lattice hierarchy which approximates the AKNS hierarchy as a continuous limit

  3. Laser-limiting materials for medical use

    Science.gov (United States)

    Podgaetsky, Vitaly M.; Kopylova, Tat'yana N.; Tereshchenko, Sergey A.; Reznichenko, Alexander V.; Selishchev, Sergey V.

    2004-03-01

    The important problem of modern laser medicine is the decrease of an exposure of biological tissues outside of an operational field and can be solved by optical radiation limiting. Organic dyes with reversibly darkening can be placed onto surfaces of irradiated tissues or can be introduced in solder for laser welding of vessels. The limiting properties of a set of nontoxic organic compounds were investigated. Nonlinear optical properties of dyes having reverse saturable absorption (pyran styryl derivatives, cyanine and porphyrine compounds) were studied under XeCl and YAG:Nd (II harmonics) lasers excitation. The effect of attenuation of a visible laser radiation is obtained for ethanol solutions of cyanines: radiation attenuation coefficient ( AC) = 25-35 at N/S = 100-250 MW/cm2. In water solutions of such compounds in UV spectrum range AC ~ 10. The spectral characteristics of compounds appeared expedient enough to operational use in laser limiters (broad passband in visible range of a spectrum). Under the data of Z-scanning (the scheme F/10) value AC ~ 70 was reached. The limiting of power laser radiation in visible (λ = 532 nm) and UV- (λ = 308 nm) spectral region and nanosecond pulse duration (7 -13 ns) across porphyrine solutions and their complexes with some metals (13 compounds) was investigated too. The comparative study of optical limiting dependence on intensity of laser radiation, solvent type and concentration of solutions was carried out for selecte wavelength. There was shown a possible use of pyran styryl derivatives DCM as limiters of visual laser radiation. To understand a mechanism of laser radiation limitation the light induced processes were experimentally and theoretically studied in organic molecules. The quantum-chemical investigation of one cyanine compound was carried out. There were noted the perspectives of laser radiation limiting by application of inverted schemes of traditional laser shutters. Usage of phenomena of light -induced

  4. Optimal Taxation in a Limited Commitment Economy

    OpenAIRE

    Yena Park

    2012-01-01

    This article studies optimal Ramsey taxation when risk sharing in private insurance markets is imperfect due to limited enforcement. In a limited commitment economy, there are externalities associated with capital and labour because individuals do not take into account that their labour and saving decisions affect aggregate labour and capital supply and wages, and thus the value of autarky. Therefore, a Ramsey government has an additional goal, which is to internalize these externalities of l...

  5. Limiting values for radioactive materials in food

    International Nuclear Information System (INIS)

    Steiner, Martin

    2014-01-01

    The contribution describes the fundamentals of radiation protection: LNT (linear, no threshold) hypotheses, ALARA (a slow as reasonably achievable), limiting values. Using the example the nuclear accident in Chernobyl the differences in contamination development in different foodstuffs in Germany is demonstrated including recommended limiting values and the radiation exposures after 30 years due to consumption of contaminated food. The natural radioactivity is about 0.3 mSv/year.

  6. Environmental radiation standards and risk limitation

    International Nuclear Information System (INIS)

    Kocher, D.C.

    1987-01-01

    The Environmental Protection Agency and Nuclear Regulatory Commission have established environmental radiation standards for specific practices which correspond to limits on risk to the public that vary by several orders of magnitude and often are much less than radiation risks that are essentially unregulated, e.g., risks from radon in homes. This paper discusses a proposed framework for environmental radiation standards that would improve the correspondence with limitation of risk. This framework includes the use of limits on annual effective dose equivalent averaged over a lifetime, rather than limits on dose equivalent to whole body or any organ for each year of exposure, and consideration of exposures of younger age groups as well as adults; limits on annual effective dose equivalent averaged over a lifetime no lower than 0.25 mSv (25 mrem) per practice; maintenance of all exposures as low as reasonably achievable (ALARA); and establishment of a generally applicable de minimis dose for public exposures. Implications of the proposed regulatory framework for the current system of standards for limiting public exposures are discussed. 20 refs

  7. Survey of beam-beam limitations

    International Nuclear Information System (INIS)

    Courant, E.; Cornacchia, M.; Donald, M.M.R.; Evans, L.R.; Tazzari, S.; Wilson, E.J.N.

    1979-01-01

    The effect of beam-beam interaction is known to limit the luminosity of electron-positron storage rings and will, no doubt, limit the proton-antiproton collision scheme for the SPS. While theorists are struggling to explain this phenomenon it is more instructive to list their failures than their rather limited successes, in the hope that experiments may emerge which will direct their endeavors. The search for a description of a nonlinear system as it approaches the limit in which ordered motion breaks down, is the nub of the problem. It has engaged many fine mathematical intellects for decades and will no doubt continue to do so long after ISABELLE, the p antip and LEP are past achievements. Empirical scaling laws are emerging which relate electron machines to each other but their extrapolation to proton machines remain a very speculative exercise. Experimental data on proton limits is confined to one machine, the ISR, which does not normally suffer the beam-beam effect and where it must be artificially induced or simulated. This machine is also very different in important ways from the p antip collider. The gloomy picture which has emerged recently is that the fixed limits which were conventionally assumed for proton and electron machines can only be said to be valid for the machines which engendered them - the best guess that could be made at the time. They are very difficult to extrapolate to other sets of parameters

  8. Pump limiter experiment in the TFR tokamak

    International Nuclear Information System (INIS)

    Anon.

    1987-01-01

    Pump limiter experiments are carried out in the TFR Tokamak. The first TFR pump limiter is located in the outer part of the torus, its double-throat head is made of graphite tiles, the neutralizer plates are made of stainless steel, and it is pumped by a 3500 l s -1 titanium sublimation pump. The first attempts showed that the exhaust efficiency ε of this pump limiter was low (1.5% of the total plasma particle efflux). To improve on these results, a new limiter head with a single longer throat has been built. The particles were better trapped and the pumping achieved an important decrease of the recycling coefficient. Geometric features and also the highly non linear regime of pressure in the pump limiter as a function of the density at the entrance slot could explain the increase by a factor 3.5 of the exhaust efficiency (ε = 5%). Ion temperatures of the order of a few eV have been deduced from Doppler broadening measurements at the neutralizer plate of the pump limiter. (orig.)

  9. Photonic limiters with enhanced dynamic range

    Science.gov (United States)

    Kononchuk, Rodion; Limberopoulos, Nicholaos; Anisimov, Igor; Vitebskiy, Ilya; Chabanov, Andrey

    2018-02-01

    Optical limiters transmit low intensity input light while blocking input light with the intensity exceeding certain limiting threshold. Conventional passive limiters utilize nonlinear optical materials, which are transparent at low light intensity and turn absorptive at high intensity. Strong nonlinear absorption, though, can result in over- heating and destruction of the limiter. Another problem is that the limiting threshold provided by the available optical material with nonlinear absorption is too high for many applications. To address the above problems, the nonlinear material can be incorporated in a photonic structure with engineered dispersion. At low intensity, the photonic structure can display resonant transmission via localized mode(s), while at high intensity the resonant transmission can disappear, and the entire stack can become highly re ective (not absorptive) within a broad frequency range. In the proposed design, the transition from the resonant transmission at low intensity to nearly total re ectivity at high intensity does not rely on nonlinear absorption; instead, it requires only a modest change in the refractive index of the nonlinear material. The latter implies a dramatic increase in the dynamic range of the limiter. The main idea is to eliminate the high-intensity resonant transmission by decoupling the localized (resonant) modes from the input light, rather than suppressing those modes using nonlinear absorption. Similar approach can be used for light modulation and switching.

  10. Risk based limits for Operational Safety Requirements

    International Nuclear Information System (INIS)

    Cappucci, A.J. Jr.

    1993-01-01

    OSR limits are designed to protect the assumptions made in the facility safety analysis in order to preserve the safety envelope during facility operation. Normally, limits are set based on ''worst case conditions'' without regard to the likelihood (frequency) of a credible event occurring. In special cases where the accident analyses are based on ''time at risk'' arguments, it may be desirable to control the time at which the facility is at risk. A methodology has been developed to use OSR limits to control the source terms and the times these source terms would be available, thus controlling the acceptable risk to a nuclear process facility. The methodology defines a new term ''gram-days''. This term represents the area under a source term (inventory) vs time curve which represents the risk to the facility. Using the concept of gram-days (normalized to one year) allows the use of an accounting scheme to control the risk under the inventory vs time curve. The methodology results in at least three OSR limits: (1) control of the maximum inventory or source term, (2) control of the maximum gram-days for the period based on a source term weighted average, and (3) control of the maximum gram-days at the individual source term levels. Basing OSR limits on risk based safety analysis is feasible, and a basis for development of risk based limits is defensible. However, monitoring inventories and the frequencies required to maintain facility operation within the safety envelope may be complex and time consuming

  11. Determination and Interpretation of Characteristic Limits for Radioactivity Measurements: Decision Threshhold, Detection Limit and Limits of the Confidence Interval

    International Nuclear Information System (INIS)

    2017-01-01

    Since 2004, the environment programme of the IAEA has included activities aimed at developing a set of procedures for analytical measurements of radionuclides in food and the environment. Reliable, comparable and fit for purpose results are essential for any analytical measurement. Guidelines and national and international standards for laboratory practices to fulfil quality assurance requirements are extremely important when performing such measurements. The guidelines and standards should be comprehensive, clearly formulated and readily available to both the analyst and the customer. ISO 11929:2010 is the international standard on the determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measuring ionizing radiation. For nuclear analytical laboratories involved in the measurement of radioactivity in food and the environment, robust determination of the characteristic limits of radioanalytical techniques is essential with regard to national and international regulations on permitted levels of radioactivity. However, characteristic limits defined in ISO 11929:2010 are complex, and the correct application of the standard in laboratories requires a full understanding of various concepts. This publication provides additional information to Member States in the understanding of the terminology, definitions and concepts in ISO 11929:2010, thus facilitating its implementation in Member State laboratories.

  12. Avaliação de características dos regimes de umidade na flona de Caxiuanã-PA durante o experimento COBRA-PARÁ Evaluation of characteristics of the moisture regimes in Caxiuanã national forest during COBRA-PARÁ experiment

    Directory of Open Access Journals (Sweden)

    Ludmila Monteiro da Silva

    2010-03-01

    Full Text Available Procura-se investigar a validade de um método de classificação de regimes de umidade, baseado na caracterização de diferentes "estados" da Camada Limite Atmosférica Tropical (CLAT, acima de uma área de floresta, de acordo com a metodologia proposta por Mahrt (1991. Para essas análises foram utilizados dados de radiossondagens e de uma torre micrometeorológica, coletados durante o período menos chuvoso da região, obtidos durante o experimento "COBRA-PARÁ" (realizado no período de 30/10 a 15/11 de 2006. A análise dos regimes de umidade consiste na representação em espaço de fase dos dados disponíveis da razão de Bowen (β, em função do parâmetro -h/L (onde h é a altura da camada de mistura turbulenta e L é o comprimento de Obukhov. Dependendo da localização dos dados nesse espaço foi possível caracterizar as seguintes classes: classe I - ar seco e instável; classe II - vento seco predominante; classe III - vento úmido; classe IV - condição úmida e instável; classe V - condensação de vapor d'água na superfície; classe VI - condição estável dominante; e classe VII -formação de orvalho induzido por radiação noturna resfriando a superfície. Das classes mencionadas, aquelas mais freqüentemente observadas em Caxiuanã, foram as III, IV e VI.We investigate the validity of a method of humidity regimes classification, based on different "states" characterization of the Tropical Atmospheric Boundary Layer (TABL, above a forest area, according to the methodology proposed by Mahrt (1991. To perform this investigation we used radiosonde information and micrometeorological tower data collected during the drier season of the region, during the experiment "COBRA-PARÁ" (carried out from 30/10 to 15/11, 2006. The analysis of moisture regimes is based on the "phase space" data representation, where the Bowen ratio (β is plotted against the -h/L parameter (where h is the height of the turbulent mixing layer and L is

  13. Threshold limit values, permissible exposure limits, and feasibility: The bases for exposure limits in the United States

    International Nuclear Information System (INIS)

    Rappaport, S.M.

    1993-01-01

    The development of exposure limits in the United States has always relied heavily upon the threshold limit values (TLVs) developed by the American Conference of Governmental Industrial Hygienists (ACGIH). In fact, the TLVs were adopted as official exposure limits by the Occupational Safety and Health Administration (OSHA) in 1972 and 1989. Given the continuing importance of the ACGIH limits, this paper compares the basis of the TLVs with that employed by OSHA de novo in its 12 new permissible exposure limits (PELs). Using benzene as an example, it is shown that OSHA's new PELs have been established following a rigorous assessment of the inherent risks and the feasibility of instituting the limit. The TLVs, on the other hand, have been developed by ad hoc procedures and appear to have traditionally reflected levels thought to be achievable at the time. However, this might be changing. Analysis of the historical reductions of TLVs, for 27 substances on the 1991-1992 list of intended changes, indicates smaller reductions in the past (median reduction of 2.0-2.5-fold between 1946 and 1988) compared to those currently being observed (median reduction of 7.5-fold between 1989 and 1991). Further analysis suggests a more aggressive policy of the ACGIH regarding TLVs for carcinogens but not for substances that produce effects other than cancer. Regardless of whether the basis of the TLVs has changed recently, it would take a relatively long time for the impact of any change to be felt, since the median age of the 1991-1992 TLVs is 16.5 years, and 75% of these limits are more than 10 years old. The implications of OSHA's continued reliance on the TLVs as a means of updating its PELs are discussed, and four alternatives are presented to the ACGIH regarding the future of its activities related to exposure limits. It is concluded that new mechanisms are needed for OSHA to update its PELs in a timely fashion so that the TLVs will not be adopted by default in the future

  14. The thermal limits to life on Earth

    Science.gov (United States)

    Clarke, Andrew

    2014-04-01

    Living organisms on Earth are characterized by three necessary features: a set of internal instructions encoded in DNA (software), a suite of proteins and associated macromolecules providing a boundary and internal structure (hardware), and a flux of energy. In addition, they replicate themselves through reproduction, a process that renders evolutionary change inevitable in a resource-limited world. Temperature has a profound effect on all of these features, and yet life is sufficiently adaptable to be found almost everywhere water is liquid. The thermal limits to survival are well documented for many types of organisms, but the thermal limits to completion of the life cycle are much more difficult to establish, especially for organisms that inhabit thermally variable environments. Current data suggest that the thermal limits to completion of the life cycle differ between the three major domains of life, bacteria, archaea and eukaryotes. At the very highest temperatures only archaea are found with the current high-temperature limit for growth being 122 °C. Bacteria can grow up to 100 °C, but no eukaryote appears to be able to complete its life cycle above ~60 °C and most not above 40 °C. The lower thermal limit for growth in bacteria, archaea, unicellular eukaryotes where ice is present appears to be set by vitrification of the cell interior, and lies at ~-20 °C. Lichens appear to be able to grow down to ~-10 °C. Higher plants and invertebrates living at high latitudes can survive down to ~-70 °C, but the lower limit for completion of the life cycle in multicellular organisms appears to be ~-2 °C.

  15. The Cognitive Limits to Economic Cluster Formation

    Directory of Open Access Journals (Sweden)

    Michael C. Carrol

    2012-01-01

    Full Text Available There has been increasing interest in the social dimensions of economic clusters. The literature now includes select examples of social network analysis plus an extensive discussion of learning regions. Unfortunately, much of this work treats the network as the primary unit of analysis. It may be that network attributes such as density, centrality, and power are primarily dependent on human limitations and not instituted factors. In other words, a human’s limited ability to process information may be a better determinant of cluster success than economic or network theory. The purpose of this paper is to highlight human limits in cluster formation. To do this, we draw on recent developments in the cognitive psychology and communications literatures. We explain that many of the factors that lead to underperforming cluster policies are the result of a human’s inability to develop and sustain a large number of social interactions. Any cluster policy must be cognizant of such limitations and carefully address these limits in the formation of the initial strategy.

  16. Equilibrium 𝛽-limits in classical stellarators

    Science.gov (United States)

    Loizu, J.; Hudson, S. R.; Nührenberg, C.; Geiger, J.; Helander, P.

    2017-12-01

    A numerical investigation is carried out to understand the equilibrium -limit in a classical stellarator. The stepped-pressure equilibrium code (Hudson et al., Phys. Plasmas, vol. 19 (11), 2012) is used in order to assess whether or not magnetic islands and stochastic field-lines can emerge at high . Two modes of operation are considered: a zero-net-current stellarator and a fixed-iota stellarator. Despite the fact that relaxation is allowed (Taylor, Rev. Mod. Phys., vol. 58 (3), 1986, pp. 741-763), the former is shown to maintain good flux surfaces up to the equilibrium -limit predicted by ideal-magnetohydrodynamics (MHD), above which a separatrix forms. The latter, which has no ideal equilibrium -limit, is shown to develop regions of magnetic islands and chaos at sufficiently high , thereby providing a `non-ideal -limit'. Perhaps surprisingly, however, the value of at which the Shafranov shift of the axis reaches a fraction of the minor radius follows in all cases the scaling laws predicted by ideal-MHD. We compare our results to the High-Beta-Stellarator theory of Freidberg (Ideal MHD, 2014, Cambridge University Press) and derive a new prediction for the non-ideal equilibrium -limit above which chaos emerges.

  17. Limiting factors in caribou population ecology

    Directory of Open Access Journals (Sweden)

    David R. Klein

    1991-10-01

    Full Text Available Caribou and wild reindeer populations fluctuate over time. On this fact there is general agreement. Factors responsible for population limitation and subsequent declines have been examined within the framework of animal population theory. There is, however, little agreement when factors limiting specific populations are generalized to Rangifer populations over broad geographic regions. Comparative examinations of wild Rangifer populations worldwide discloses that factors that have regulated those populations are highly variable between populations, apparently as a reflection of the differences in environmental variables unique to each population. Examples exist of populations where major regulating factors have been climatic extremes, predation, hunting mortality, food limitation, insects, parasites, disease, interspecific competition, and human developmental impacts or combinations of these factors. This diversity of limiting factors affecting caribou and wild reindeer populations is a reflection of the ecologial complexity of the species, a concept that has often been ignored in past efforts to reach management decisions by extrapolation from the limited localized knowledge available on the species.

  18. Universality, marginal operators, and limit cycles

    International Nuclear Information System (INIS)

    Glazek, Stanislaw D.; Wilson, Kenneth G.

    2004-01-01

    The universality of renormalization-group limit-cycle behavior is illustrated with a simple discrete Hamiltonian model. A nonperturbative renormalization-group equation for the model is soluble analytically at criticality and exhibits one marginal operator (made necessary by the limit cycle) and an infinite set of irrelevant operators. Relevant operators are absent. The model exhibits an infinite series of bound-state energy eigenvalues. This infinite series approaches an exact geometric series as the eigenvalues approach zero--also a consequence of the limit cycle. Wegner's eigenvalues for irrelevant operators are calculated generically for all choices of parameters in the model. We show that Wegner's eigenvalues are independent of location on the limit cycle, in contrast with Wegner's operators themselves, which vary depending on their location on the limit cycle. An example is then used to illustrate numerically how one can tune the initial Hamiltonian to eliminate the first two irrelevant operators. After tuning, the Hamiltonian's bound-state eigenvalues converge much more quickly than otherwise to an exact geometric series

  19. First pump limiter experiments in TORE SUPRA

    International Nuclear Information System (INIS)

    Chatelier, M.; Klepper, C.C.; Bruneau, J.L.; Chappuis, P.; Gil, C.; Guilhem, D.; Lipa, M.; Rodriguez, L.; Vallet, J.C.; Van Houtte, D.; Watkins, J.G.

    1989-01-01

    The operation of TORE SUPRA at full power (25MW, 30s) has led to the design of a full set of actively pumped carbon limiters to remove at least 8MW and to partially control the particle balance. An interim version is now installed, composed of 5 vertical and one horizontal outboard (OPL) pump limiters, semi-inertially water cooled. The latter is a result of a collaboration between the US DOE and the Association EUR-CEA, it is fully instrumented and therefore can serve as a reference for the final design. Ohmic discharges (1.85T, 740kA, 8.5s) in helium have been used to test the thermal load on and the particle exhaust efficiency of the OPL. In these experiments the plasma is formed on the inner wall (R = 232 cm, a = 76 cm) and subsequently displaced (6 cm) outward, early on the current plateau, to lean on the OPL (R = 238 cm, a = 75 cm). In addition to the limiters above, a non-pumped outboard (ONLP) limiter of identical shape to the OPL served to produce similar discharges for better comparison and determination of particle control. A comparison is made hereafter of the thermal load and particle pumping effects on the OPL when the plasma is in contact either with the OPL/ONPL alone or with the OPL and the vertical limiters together. 3 refs., 1 fig., 2 tabs

  20. On the ultrarelativistic limit of general relativity

    International Nuclear Information System (INIS)

    Dautcourt, G.

    1998-01-01

    As is well-known, Newton's gravitational theory can be formulated as a four-dimensional space-time theory and follows as singular limit from Einstein's theory, if the velocity of light tends to the infinity. Here 'singular' stands for the fact, that the limiting geometrical structure differs from a regular Riemannian space-time. Geometrically, the transition Einstein → Newton can be viewed as an 'opening' of the light cones. This picture suggests that there might be other singular limits of Einstein's theory: Let all light cones shrink and ultimately become part of a congruence of singular world lines. The limiting structure may be considered as a null hypersurface embedded in a five-dimensional spacetime. While the velocity of light tends to zero here, all other velocities tend to the velocity of light. Thus one may speak of an ultrarelativistic limit of General Relativity. The resulting theory is as simple as Newton's gravitational theory, with the basic difference, that Newton's elliptic differential equation is replaced by essentially ordinary differential equations, with derivatives tangent to the generators of the singular congruence. The Galilei group is replaced by the Carroll group introduced by Levy-Leblond. We suggest to study near ultrarelativistic situations with a perturbational approach starting from the singular structure, similar to post-Newtonian expansions in the c → ∞ case. (author)

  1. Accuracy Limitations in Optical Linear Algebra Processors

    Science.gov (United States)

    Batsell, Stephen Gordon

    1990-01-01

    One of the limiting factors in applying optical linear algebra processors (OLAPs) to real-world problems has been the poor achievable accuracy of these processors. Little previous research has been done on determining noise sources from a systems perspective which would include noise generated in the multiplication and addition operations, noise from spatial variations across arrays, and from crosstalk. In this dissertation, we propose a second-order statistical model for an OLAP which incorporates all these system noise sources. We now apply this knowledge to determining upper and lower bounds on the achievable accuracy. This is accomplished by first translating the standard definition of accuracy used in electronic digital processors to analog optical processors. We then employ our second-order statistical model. Having determined a general accuracy equation, we consider limiting cases such as for ideal and noisy components. From the ideal case, we find the fundamental limitations on improving analog processor accuracy. From the noisy case, we determine the practical limitations based on both device and system noise sources. These bounds allow system trade-offs to be made both in the choice of architecture and in individual components in such a way as to maximize the accuracy of the processor. Finally, by determining the fundamental limitations, we show the system engineer when the accuracy desired can be achieved from hardware or architecture improvements and when it must come from signal pre-processing and/or post-processing techniques.

  2. Power balance limit in collective ion acceleration

    International Nuclear Information System (INIS)

    Olson, C.L.

    1978-01-01

    The power balance limit to the IREB beam front propagation velocity, as first applied to the problem of collective ion acceleration by Olson in 1973, is investigated in view of recent data of Ecker and Putnam. The beam front velocity β/sub f/c as a function of IREB impedance Z is given, showing the dependence on the power balance limit, the ionization front velocity, and the runaway cutoff. The Olson theory predictions, with no fitted parameters, are shown to be in agreement with the data. Further comparisons of β/sub f/ with respect to the IREB electron energy, the IREB current, and the neutral gas pressure are given. Various forms for the power balance limit are discussed; it is shown that inclusion of the secondary electron power loss term results in an essentially negligible correction to β/sub f/ for typical data parameters. The power balance limit used by Ecker and Putnam is shown to be simply a 3-parameter curve fit, wherein the fitted parameters must exceed their allowed physical values to obtain a reasonable fit for β/sub f/ vs Z. Further, it is shown that this curve fitting leads to serious disagreements with other aspects of the data. It is concluded that the original Olson theory adequately accounts for the data, and that the power balance limit for IREB/gas data is typically not significant except for very small values of Z

  3. Numerical Limit Analysis of Precast Concrete Structures

    DEFF Research Database (Denmark)

    Herfelt, Morten Andersen

    Precast concrete elements are widely used in the construction industry as they provide a number of advantages over the conventional in-situ cast concrete structures. Joints cast on the construction site are needed to connect the precast elements, which poses several challenges. Moreover, the curr...... problems are solved efficiently using state-of-the-art solvers. It is concluded that the framework and developed joint models have the potential to enable efficient design of precast concrete structures in the near future......., the current practice is to design the joints as the weakest part of the structure, which makes analysis of the ultimate limit state behaviour by general purpose software difficult and inaccurate. Manual methods of analysis based on limit analysis have been used for several decades. The methods provide...... of the ultimate limit state behaviour. This thesis introduces a framework based on finite element limit analysis, a numerical method based on the same extremum principles as the manual limit analysis. The framework allows for efficient analysis and design in a rigorous manner by use of mathematical optimisation...

  4. Scrape-off layer based modelling of the density limit in beryllated JET limiter discharges

    International Nuclear Information System (INIS)

    Borrass, K.; Campbell, D.J.; Clement, S.; Vlases, G.C.

    1993-01-01

    The paper gives a scrape-off layer based interpretation of the density limit in beryllated JET limiter discharges. In these discharges, JET edge parameters show a complicated time evolution as the density limit is approached and the limit is manifested as a non-disruptive density maximum which cannot be exceeded by enhanced gas puffing. The occurrence of Marfes, the manner of density control and details of recycling are essential elements of the interpretation. Scalings for the maximum density are given and compared with JET data. The relation to disruptive density limits, previously observed in JET carbon limiter discharges, and to density limits in divertor discharges is discussed. (author). 18 refs, 10 figs, 1 tab

  5. Force Limited Vibration Test of HESSI Imager

    Science.gov (United States)

    Amato, Deborah; Pankow, David; Thomsen, Knud

    2000-01-01

    The High Energy Solar Spectroscopic Imager (HESSI) is a solar x-ray and gamma-ray observatory scheduled for launch in November 2000. Vibration testing of the HESSI imager flight unit was performed in August 1999. The HESSI imager consists of a composite metering tube, two aluminum trays mounted to the tube on titanium flexure mounts, and nine modulation grids mounted on each tray. The vibration tests were acceleration controlled and force limited, in order to prevent overtesting. The force limited strategy reduced the shaker force and notched the acceleration at resonances. The test set-up, test levels, and results are presented. The development of the force limits is also discussed. The imager successfully survived the vibration testing.

  6. Limited aperture effects on ultrasonic image reconstruction

    International Nuclear Information System (INIS)

    Kogan, V.G.; Rose, J.H.

    1985-01-01

    In the inverse Born approximation the shape of a weak scatterer can be determined from a knowledge of the backscattered ultrasonic amplitude for all directions of incidence and all frequencies. Two questions are considered. First, what information on the scatterer shape is preserved and what is degraded if the scattering data are available only within a limited set of incident directions (limited aperture). This problem is addressed for a spherical weakly scattering uniform flaw. It is shown that the problem of a general uniform ellipsoidal flaw can be reduced to the spherical case by a scale transformation; however, the apertures in these two cases must be related by the same transformation. Second, limited aperture and finite bandwidth Born inversions were performed for strongly scattering flaws (voids and cracks) using numerically generated scattering amplitudes. These inversions were then compared with the weak scattering analytic results, which show many common features

  7. Occupational Exposures and Chronic Airflow Limitation

    Directory of Open Access Journals (Sweden)

    Helen Dimich-Ward

    1996-01-01

    Full Text Available The recent literature was reviewed to evaluate whether chronic airflow limitation is associated with occupational exposures to dusts. Only those studies that controlled for the effects of smoking were included. There is compelling evidence that exposure to inorganic dusts, such as from coal and hardrock mining or asbestos, are associated with the development of chronic airflow limitation, independently of pneumoconiosis. Nonsmoking gold miners are particularly at high risk of airflow obstruction and emphysema. Findings from studies of organic dusts, such as exposures to wood, cotton, grain or other agricultural dusts, or to mixed dust exposures, were less consistent but tended to show positive dose-response associations. In the majority of studies, no statistical interaction was shown between dust exposures and smoking; however, the effects of the dust exposures were often more pronounced. An occupational history should be considered, in addition to a smoking history, as an integral part of an investigation of chronic airflow limitation in a patient.

  8. Performance limitations of translationally symmetric nonimaging devices

    Science.gov (United States)

    Bortz, John C.; Shatz, Narkis E.; Winston, Roland

    2001-11-01

    The component of the optical direction vector along the symmetry axis is conserved for all rays propagated through a translationally symmetric optical device. This quality, referred to herein as the translational skew invariant, is analogous to the conventional skew invariant, which is conserved in rotationally symmetric optical systems. The invariance of both of these quantities is a consequence of Noether's theorem. We show how performance limits for translationally symmetric nonimaging optical devices can be derived from the distributions of the translational skew invariant for the optical source and for the target to which flux is to be transferred. Examples of computed performance limits are provided. In addition, we show that a numerically optimized non-tracking solar concentrator utilizing symmetry-breaking surface microstructure can overcome the performance limits associated with translational symmetry. The optimized design provides a 47.4% increase in efficiency and concentration relative to an ideal translationally symmetric concentrator.

  9. Multiple soft limits of cosmological correlation functions

    International Nuclear Information System (INIS)

    Joyce, Austin; Khoury, Justin; Simonović, Marko

    2015-01-01

    We derive novel identities satisfied by inflationary correlation functions in the limit where two external momenta are taken to be small. We derive these statements in two ways: using background-wave arguments and as Ward identities following from the fixed-time path integral. Interestingly, these identities allow us to constrain some of the O(q 2 ) components of the soft limit, in contrast to their single-soft analogues. We provide several nontrivial checks of our identities both in the context of resonant non-Gaussianities and in small sound speed models. Additionally, we extend the relation at lowest order in external momenta to arbitrarily many soft legs, and comment on the many-soft extension at higher orders in the soft momentum. Finally, we consider how higher soft limits lead to identities satisfied by correlation functions in large-scale structure

  10. β limit disruptions in the TFTR tokamak

    International Nuclear Information System (INIS)

    Fredrickson, E.D.; McGuire, K.; Janos, A.; Bell, M.; Budny, R.V.; Bush, C.E.; Manickam, J.; Mynick, H.; Nazikian, R.; Taylor, G.

    1994-11-01

    A disruptive β limit (β = plasma pressure/magnetic pressure) is observed in high performance plasmas in TFTR. The MHD character of these disruptions differs substantially from the disruptions in high density plasmas (density limit disruptions) on TFTR. The high β disruptions can occur with less than a milliseconds warning in the form of a fast growing precursor. The precursor appears to be an external kink or internal (m,n)=(1,1) kink strongly coupled through finite β effects and toroidal terms to higher m components. It does not have the open-quote cold bubble close-quote structure found in density limit disruptions. There is also no evidence for a change in the internal inductance, i.e., a major reconnection of the flux, at the time of the thermal quench

  11. Limit on the tau neutrino mass

    International Nuclear Information System (INIS)

    Cinabro, D.; Henderson, S.; Kinoshita, K.; Liu, T.; Saulnier, M.; Wilson, R.; Yamamoto, H.; Sadoff, A.J.; Ammar, R.; Ball, S.; Baringer, P.; Coppage, D.; Copty, N.; Davis, R.; Hancock, N.; Kelly, M.; Kwak, N.; Lam, H.; Kubota, Y.; Lattery, M.; Nelson, J.K.; Patton, S.; Perticone, D.; Poling, R.; Savinov, V.; Schrenk, S.; Wang, R.; Alam, M.S.; Kim, I.J.; Nemati, B.; O'Neill, J.J.; Romero, V.; Severini, H.; Sun, C.R.; Zoeller, M.M.; Crawford, G.; Fulton, R.; Fujino, D.; Gan, K.K.; Kagan, H.; Kass, R.; Lee, J.; Malchow, R.; Morrow, F.; Skovpen, Y.; Sung, M.; White, C.; Whitmore, J.; Wilson, P.; Butler, F.; Fu, X.; Kalbfleisch, G.; Lambrecht, M.; Ross, W.R.; Skubic, P.; Snow, J.; Wang, P.L.; Wood, M.; Bortoletto, D.; Brown, D.N.; Dominick, J.; McIlwain, R.L.; Miao, T.; Miller, D.H.; Modesitt, M.; Schaffner, S.F.; Shibata, E.I.; Shipsey, I.P.J.; Wang, P.N.; Battle, M.; Ernst, J.; Kroha, H.; Roberts, S.; Sparks, K.; Thorndike, E.H.; Wang, C.H.; Sanghera, S.; Skwarnicki, T.; Stroynowski, R.; Artuso, M.; He, D.; Goldberg, M.; Horwitz, N.; Kennett, R.; Moneti, G.C.; Muheim, F.; Mukhin, Y.; Playfer, S.; Rozen, Y.; Rubin, P.; Stone, S.; Thulasidas, M.; Vasseur, G.; Zhu, G.; Barnes, A.V.; Bartelt, J.; Csorna, S.E.; Egyed, Z.; Jain, V.; Sheldon, P.; Akerib, D.S.; Barish, B.; Chadha, M.; Chan, S.; Cowen, D.F.; Eigen, G.; Miller, J.S.; Urheim, J.; Weinstein, A.J.; Acosta, D.; Athanas, M.; Masek, G.; Ong, B.; Paar, H.; Sivertz, M.; Bean, A.; Gronberg, J.; Kutschke, R.; Menary, S.; Morrison, R.J.; Nakanishi, S.; Nelson, H.N.; Nelson, T.K.; Richman, J.D.; Tajima, H.; Schmidt, D.; Sperka, D.; Witherell, M.S.; Procario, M.; Yang, S.; Balest, R.; Cho, K.; Daoudi, M.; Ford, W.T.; Johnson, D.R.; Lingel, K.; Lohner, M.; Rankin, P.; Smith, J.G.; Alexander, J.P.; Bebek, C.; Berkelman, K.; Besson, D.; Browder, T.E.; Cassel, D.G.; Cho, H.A.; Coffman, D.M.; Drell, P.S.; Ehrlich, R.; Galik, R.S.; Garcia-Sciveres, M.; Geiser, B.; Gittelman, B.; Gray, S.W.; Hartill, D.L.; Heltsley, B.

    1993-01-01

    A limit on the tau neutrino mass M ντ is obtained from a study of tau decays in the reaction e + e-→τ + τ - at center-of-mass energies ∼10.6 GeV. The result is based on an end-point analysis of the invariant mass spectrum of the decay products in the decay modes τ - →3h - 2h + ν τ and τ - →2h - h+2π 0 ν τ . The data sample used in this analysis contains 1.77x10 6 tau pairs, corresponding to an integrated luminosity of 1.92 fb -1 , and is substantially larger than previous data samples used to place a limit on M ντ . The limit obtained for both five-hadron modes together is 32.6 MeV at 95% C.L

  12. Predicting incident size from limited information

    International Nuclear Information System (INIS)

    Englehardt, J.D.

    1995-01-01

    Predicting the size of low-probability, high-consequence natural disasters, industrial accidents, and pollutant releases is often difficult due to limitations in the availability of data on rare events and future circumstances. When incident data are available, they may be difficult to fit with a lognormal distribution. Two Bayesian probability distributions for inferring future incident-size probabilities from limited, indirect, and subjective information are proposed in this paper. The distributions are derived from Pareto distributions that are shown to fit data on different incident types and are justified theoretically. The derived distributions incorporate both inherent variability and uncertainty due to information limitations. Results were analyzed to determine the amount of data needed to predict incident-size probabilities in various situations. Information requirements for incident-size prediction using the methods were low, particularly when the population distribution had a thick tail. Use of the distributions to predict accumulated oil-spill consequences was demonstrated

  13. Dose limits to the eye lens

    International Nuclear Information System (INIS)

    Sion, N.

    2016-01-01

    Protecting the human body from the effects of ionizing radiation is essential to forestall stochastic effects and require placing limits on the effective dose. Dose limits on specific organs are also necessary to reduce the deterministic effects and tissue reactions. The standard for radiation protection was ISO 15382 (2002) which mainly dealt with beta radiation for nuclear power plant workers. Clearly an update is required to allow for new technology and the proliferative use of radiation in medical practices. There is a need for more explicit radiation monitoring to operators and staff. ICRP118 (International Commission on Radiological Protection), Ref. 1, evolved their recommendations to include eye lens doses as a follow on to their publication 103 and to focus on radiation exposures. It provides updated estimates of 'practical' threshold doses for tissue injury at the level of 1% incidence. This paper discusses the current status and the recommendation for a drastic reduction of the dose limit to the eye lens. (author)

  14. Numerical Limit Analysis of Reinforced Concrete Structures

    DEFF Research Database (Denmark)

    Larsen, Kasper Paaske

    For more than half a century, limit state analysis based on the extremum principles have been used to assess the load bearing capacity of reinforced concrete structures. Extensi- ve research within the field has lead to several techniques for performing such analysis manually. While these manual...... methods provide engineers with valuable tools for limit sta- te analysis, their application becomes difficult with increased structural complexity. The main challenge is to solve the optimization problem posed by the extremum principles. This thesis is a study of how numerical methods can be used to solve...... limit state analysis problems. The work focuses on determination of the load bearing capacity of reinforced concrete structures by employing the lower bound theorem and a finite element method using equilibrium elements is developed. The recent year’s development within the field of convex optimization...

  15. Limits to fuel/coolant mixing

    International Nuclear Information System (INIS)

    Corradini, M.L.; Moses, G.A.

    1985-01-01

    The vapor explosion process involves the mixing of fuel with coolant prior to the explosion. A number of analysts have identified limits to the amount of fuel/coolant mixing that could occur within the reactor vessel following a core melt accident. Past models are reviewed and a sim plified approach is suggested to estimate the upper limit on the amount of fuel/coolant mixing pos sible. The approach uses concepts first advanced by Fauske in a different way. The results indicat that water depth is an important parameter as well as the mixing length scale D /SUB mix/ , and for large values of D /SUB mix/ the fuel mass mixed is limited to <7% of the core mass

  16. Primary system temperature limits and transient mitigation

    Energy Technology Data Exchange (ETDEWEB)

    Drucker, G.S.; Bost, D.S.

    1978-10-03

    Results of a study to determine the limiting temperature conditions in a large reactor system are presented. The study considers a sodium-cooled breeder reactor system having a loop-type primary system configuration. A temperature range of 930 to 1050/sup 0/F in reactor outlet temperature is covered. Significant findings were that the use of the materials for the 930/sup 0/F reference design, i.e., a core material of 20% cold-worked 316 stainless steel, a primary piping material of 316SS, and a steam generator material of unstabilized 2-1/4 Cr - 1 Mo resulted in limiting conditions in component performance at the higher temperatures. Means to circumvent these limits through the use of alternate materials, mitigation of thermal transients, and/or design changes are presented. The economic incentive to make some materials changes is also presented.

  17. Limit analysis and design of containment vessels

    International Nuclear Information System (INIS)

    Save, M.

    1984-01-01

    In the introduction, the theory of plastic analysis of shells is briefly recalled. Minimum-volume design for assigned load factor at plastic collapse is then considered and optimality criteria are derived for plates and shells of continuously varying or piecewise-constant thickness. In the first part, containers made of metal are examined. Analytical and numerical limit analysis solutions and corresponding experimental results are considered for various types of vessels, including intersecting shells. Attention is given to experimental post-yield behavior. Some tests up to fracture are discussed. New theoretical and experimental results of limit analysis of stiffened cylindrical vessels are presented, in which reinforcing rings are treated as discrete structural element (no smearing out) and due account is taken of their strong curvature. Cases of collapse by instability under internal pressure are pointed out. Minimum-volume design of circular plates and cylindrical shells is then formulated and various examples are presented of sandwich and solid metal structures. Containers of piecewise-constant thickness are given particular attention. Available experimental evidence on minimum-volume design of plates and shells is reviewed and commented upon. The second part deals with reinforced concrete vessels. Cylindrical containers are studied, from both points of view of limit analysis and of limit design with minimum volume of reinforcement. The practical use of the latter solutions is discussed. A third part reviews other loading cases (including cyclic and impact loads) and gives indications on corresponding theories, formulations and solution methods. The last part is devoted to a discussion of the limitations of the methods presented, within the frame of the 'limit states' design philosophy, which is first briefly recalled. Considerations on further research in the field conclude the paper. (orig.)

  18. ON COMPUTING UPPER LIMITS TO SOURCE INTENSITIES

    International Nuclear Information System (INIS)

    Kashyap, Vinay L.; Siemiginowska, Aneta; Van Dyk, David A.; Xu Jin; Connors, Alanna; Freeman, Peter E.; Zezas, Andreas

    2010-01-01

    A common problem in astrophysics is determining how bright a source could be and still not be detected in an observation. Despite the simplicity with which the problem can be stated, the solution involves complicated statistical issues that require careful analysis. In contrast to the more familiar confidence bound, this concept has never been formally analyzed, leading to a great variety of often ad hoc solutions. Here we formulate and describe the problem in a self-consistent manner. Detection significance is usually defined by the acceptable proportion of false positives (background fluctuations that are claimed as detections, or Type I error), and we invoke the complementary concept of false negatives (real sources that go undetected, or Type II error), based on the statistical power of a test, to compute an upper limit to the detectable source intensity. To determine the minimum intensity that a source must have for it to be detected, we first define a detection threshold and then compute the probabilities of detecting sources of various intensities at the given threshold. The intensity that corresponds to the specified Type II error probability defines that minimum intensity and is identified as the upper limit. Thus, an upper limit is a characteristic of the detection procedure rather than the strength of any particular source. It should not be confused with confidence intervals or other estimates of source intensity. This is particularly important given the large number of catalogs that are being generated from increasingly sensitive surveys. We discuss, with examples, the differences between these upper limits and confidence bounds. Both measures are useful quantities that should be reported in order to extract the most science from catalogs, though they answer different statistical questions: an upper bound describes an inference range on the source intensity, while an upper limit calibrates the detection process. We provide a recipe for computing upper

  19. Coding of Information in Limit Cycle Oscillators

    Science.gov (United States)

    Schleimer, Jan-Hendrik; Stemmler, Martin

    2009-12-01

    Starting from a general description of noisy limit cycle oscillators, we derive from the Fokker-Planck equations the linear response of the instantaneous oscillator frequency to a time-varying external force. We consider the time series of zero crossings of the oscillator’s phase and compute the mutual information between it and the driving force. A direct link is established between the phase response curve summarizing the oscillator dynamics and the ability of a limit cycle oscillator, such as a heart cell or neuron, to encode information in the timing of peaks in the oscillation.

  20. Geometric derivation of the quantum speed limit

    International Nuclear Information System (INIS)

    Jones, Philip J.; Kok, Pieter

    2010-01-01

    The Mandelstam-Tamm and Margolus-Levitin inequalities play an important role in the study of quantum-mechanical processes in nature since they provide general limits on the speed of dynamical evolution. However, to date there has been only one derivation of the Margolus-Levitin inequality. In this paper, alternative geometric derivations for both inequalities are obtained from the statistical distance between quantum states. The inequalities are shown to hold for unitary evolution of pure and mixed states, and a counterexample to the inequalities is given for evolution described by completely positive trace-preserving maps. The counterexample shows that there is no quantum speed limit for nonunitary evolution.

  1. Superconducting fault current limiter for railway transport

    Energy Technology Data Exchange (ETDEWEB)

    Fisher, L. M., E-mail: LMFisher@niitfa.ru; Alferov, D. F.; Akhmetgareev, M. R.; Budovskii, A. I.; Evsin, D. V.; Voloshin, I. F.; Kalinov, A. V. [National Technical Physics and Automation Research Institute (Russian Federation)

    2015-12-15

    A resistive switching superconducting fault current limiter (SFCL) for DC networks with voltage of 3.5 kV and nominal current of 2 kA is developed. The SFCL consists of two series-connected units: block of superconducting modules and high-speed vacuum breaker with total disconnection time not more than 8 ms. The results of laboratory tests of superconducting SFCL modules in current limiting mode are presented. The recovery time of superconductivity is experimentally determined. The possibility of application of SFCL on traction substations of Russian Railways is considered.

  2. Critical point inequalities and scaling limits

    International Nuclear Information System (INIS)

    Newman, C.M.

    1979-01-01

    A refined and extended version of the Buckingham-Gunton inequality relating various pairs of critical exponents is shown to be valid for a large class of statistical mechanical models. If this inequality is an equality (in the refined sense) and one of the critical exponents has a non-Gaussian value, then any scaling limit must be non-Gaussian. This result clarifies the relationships between the nontriviality of triviality of the scaling limit for ordinary critical points in four dimensions (or tricritical points in three dimensions) and the existence of logarithmic factors in the asymptotics which define the two critical exponents. (orig.) [de

  3. Poisson-Hopf limit of quantum algebras

    International Nuclear Information System (INIS)

    Ballesteros, A; Celeghini, E; Olmo, M A del

    2009-01-01

    The Poisson-Hopf analogue of an arbitrary quantum algebra U z (g) is constructed by introducing a one-parameter family of quantizations U z,ℎ (g) depending explicitly on ℎ and by taking the appropriate ℎ → 0 limit. The q-Poisson analogues of the su(2) algebra are discussed and the novel su q P (3) case is introduced. The q-Serre relations are also extended to the Poisson limit. This approach opens the perspective for possible applications of higher rank q-deformed Hopf algebras in semiclassical contexts

  4. BCS gap equations in the quantum limit

    International Nuclear Information System (INIS)

    Norman, M.R.

    1991-01-01

    It was shown that in the quantum limit where only one Landau level is occupied,Tc diverges with increasing H.It was also indcated that Tc is unaffected impurities or by a nonzero g factor, in contrast to what was indicated in Ref. 2.The authors result is due to an assumption that the DOS about a Debye width of the chemical potential is constant. This approximation is questionable sice chemical potential decrease rapidly as H increases.Here Tc is calculated as a function of H in the quantum limit for an appropriate set of parameters to understand how impurities and nonzero g factor affect the result

  5. Limit values for exposure to physical agents

    International Nuclear Information System (INIS)

    Anon.

    1983-01-01

    The limit values for exposure to thermal environments adopted by the French AFNOR and by the ISO Working Group (AFNOR Standard X 35-201 and ISO Standard 7243, and AFNOR Standard X 35-204). The limit values for exposure to other physical agents established by the American ACGIH for 1982. The following agents are covered: - laser radiation (ocular and skin exposure); - ultraviolet radiation; - visible and near-infrared radiation (retinal thermal and photochemical injury); - airborne and upper sonic and ultrasonic acoustic radiation; - radiofrequency radiation [fr

  6. Radioecological activity limits for radioactive waste disposal

    International Nuclear Information System (INIS)

    Ahmet, E. Osmanlioglu

    2006-01-01

    Full text: Near surface disposal is an option used by many countries for the disposal of radioactive waste containing mainly short lived radionuclides. Near surface disposal term includes broad range of facilities from simple trenches to concrete vaults. Principally, disposal of radioactive waste requires the implementation of measures that will provide safety for human health and environment now and in the future. For this reason preliminary activity limits should be determined to avoid radioecological problems. Radioactive waste has to be safely disposed in a regulated manner, consistent with internationally agreed principles and standards and with national legislations to avoid serious radioecological problems. The purpose of this study, presents a safety assessment approach to derive operational and post-closure radioecological activity limits for the disposal of radioactive waste. Disposal system has three components; the waste, the facility (incl. engineered barriers) and the site (natural barriers). Form of the waste (unconditioned or conditioned) is effective at the beginning of the migration scenerio. Existence of the engineered barriers in the facility will provide long term isolation of the waste from environment. The site characteristics (geology, groundwater, seismicity, climate etc.) are important for the safety of the system. Occupational exposure of a worker shall be controlled so that the following dose limits are not exceeded: an effective dose of 20mSv/y averaged over 5 consecutive years; and an effective dose of 50mSv in any single year. The effective dose limit for members of the public recommended by ICRP and IAEA is 1 mSv/y for exposures from all man-made sources [1,2]. Dose constraints are typically a fraction of the dose limit and ICRP recommendations (0.3 mSv/y) could be applied [3,4]. Radioecological activity concentration limits of each radionuclide in the waste (Bq/kg) were calculated. As a result of this study radioecological activity

  7. Current limiting capability of diffused resistors

    International Nuclear Information System (INIS)

    Shedd, W.; Cappelli, J.

    1979-01-01

    An experimental evaluation of the current limiting capability of dielectrically isolated diffused resistors at transient ionizing dose rates up to 6*10 12 rads(Si)/sec is presented. Existing theoretical predictions of the transient response of diffused resistors are summarized and compared to the experimentally measured values. The test resistors used allow the effects of sheet resistance and geometry on the transient response to be determined. The experimental results show that typical dielectrically isolated diffused resistors maintain adequate current limiting capability for use in radiation hardened integrated circuits

  8. Embracing the quantum limit in silicon computing.

    Science.gov (United States)

    Morton, John J L; McCamey, Dane R; Eriksson, Mark A; Lyon, Stephen A

    2011-11-16

    Quantum computers hold the promise of massive performance enhancements across a range of applications, from cryptography and databases to revolutionary scientific simulation tools. Such computers would make use of the same quantum mechanical phenomena that pose limitations on the continued shrinking of conventional information processing devices. Many of the key requirements for quantum computing differ markedly from those of conventional computers. However, silicon, which plays a central part in conventional information processing, has many properties that make it a superb platform around which to build a quantum computer. © 2011 Macmillan Publishers Limited. All rights reserved

  9. Limitations, insights and improvements to gyrokinetics

    International Nuclear Information System (INIS)

    Catto, Peter J.; Parra, Felix I.; Kagan, Grigory; Simakov, Andrei N.

    2009-01-01

    We first consider gyrokinetic quasineutrality limitations when evaluating the axisymmetric radial electric field in a non-turbulent tokamak by an improved examination of intrinsic ambipolarity. We next prove that the background ions in a pedestal of poloidal ion gyroradius scale must be Maxwellian and nearly isothermal in Pfirsch-Schlueter and banana regime tokamak plasmas, and then consider zonal flow behaviour in a pedestal. Finally, we focus on a simplifying procedure for our transport time scale hybrid gyrokinetic-fluid treatment that removes the limitations of gyrokinetic quasineutrality and remains valid in the pedestal.

  10. Dynamical limitations to heavy ion fusion

    International Nuclear Information System (INIS)

    Back, B.B.

    1983-01-01

    Dynamical limitations to heavy ion fusion reaction are considered. The experimental signatures and the importance of a quasi-fission process are examined. The anaular distributions of fission fragments for the 32 S+ 208 Pb and 16 O+ 238 U systems are presented. It is shown that the observations of quasi-fission for even rather ''light'' heavy ions poeess severe limitations on the fusion process. This result may consequently be responsible for the lack of success of the search for super heavy elements in heavy ion fusion reactions

  11. Solubility limited radionuclide transport through geologic media

    International Nuclear Information System (INIS)

    Muraoka, Susumu; Iwamoto, Fumio; Pigford, T.H.

    1980-11-01

    Prior analyses for the migration of radionuclides neglect solubility limits of resolved radionuclide in geologic media. But actually some of the actinides may appear in chemical forms of very low solubility. In the present report we have proposed the migration model with no decay parents in which concentration of radionuclide is limited in concentration of solubility in ground water. In addition, the analytical solutions of the space-time-dependent concentration are presented in the case of step release, band release and exponential release. (author)

  12. Superconducting fault current limiter for railway transport

    International Nuclear Information System (INIS)

    Fisher, L. M.; Alferov, D. F.; Akhmetgareev, M. R.; Budovskii, A. I.; Evsin, D. V.; Voloshin, I. F.; Kalinov, A. V.

    2015-01-01

    A resistive switching superconducting fault current limiter (SFCL) for DC networks with voltage of 3.5 kV and nominal current of 2 kA is developed. The SFCL consists of two series-connected units: block of superconducting modules and high-speed vacuum breaker with total disconnection time not more than 8 ms. The results of laboratory tests of superconducting SFCL modules in current limiting mode are presented. The recovery time of superconductivity is experimentally determined. The possibility of application of SFCL on traction substations of Russian Railways is considered

  13. Pumped-limiter study for Alcator DCT

    International Nuclear Information System (INIS)

    Brooks, J.N.; Mattas, R.F.; Cha, Y.S.; Hassanein, A.M.; Majumdar, S.

    1983-06-01

    A study was performed for a pumped-limiter design for the proposed Alcator DCT device. The study focused on reactor-relevant issues. The main issues examined were configuration, surface erosion, thermal hydraulics, and the choice of structural and surface materials. A bottom, flat limiter, with a copper-alloy substrate, seems to be a reasonable design and should provide an opportunity to test high power and particle loadings. Carbon is recommended as a surface material if acceptable redeposition properties can be demonstrated

  14. Pumped-limiter study for Alcator DCT

    Energy Technology Data Exchange (ETDEWEB)

    Brooks, J.N.; Mattas, R.F.; Cha, Y.S.; Hassanein, A.M.; Majumdar, S.

    1983-06-01

    A study was performed for a pumped-limiter design for the proposed Alcator DCT device. The study focused on reactor-relevant issues. The main issues examined were configuration, surface erosion, thermal hydraulics, and the choice of structural and surface materials. A bottom, flat limiter, with a copper-alloy substrate, seems to be a reasonable design and should provide an opportunity to test high power and particle loadings. Carbon is recommended as a surface material if acceptable redeposition properties can be demonstrated.

  15. Beam-intensity limitations in linear accelerators

    International Nuclear Information System (INIS)

    Jameson, R.A.

    1981-01-01

    Recent demand for high-intensity beams of various particles has renewed interest in the investigation of beam current and beam quality limits in linear RF and induction accelerators and beam-transport channels. Previous theoretical work is reviewed, and new work on beam matching and stability is outlined. There is a real need for extending the theory to handle the time evolution of beam emittance; some present work toward this goal is described. The role of physical constraints in channel intensity limitation is emphasized. Work on optimizing channel performance, particularly at low particle velocities, has resulted in major technological advances. The opportunities for combining such channels into arrays are discussed. 50 references

  16. Relativistic classical limit of quantum theory

    International Nuclear Information System (INIS)

    Shin, G.R.; Rafelski, J.

    1993-01-01

    We study the classical limit of the equal-time relativistic quantum transport theory. We discuss in qualitative terms the need to fold first the Wigner function with a coarse-graining function. Only then does the singularity at ℎ→0 seem to be manageable. In the limit ℎ→0, we obtain the relativistic Vlasov equations for the particle and the antiparticle sector of the Fock space. Similarly, we address the evolution equations of the spin and the magnetic-moment density

  17. 78 FR 75679 - Position Limits for Derivatives

    Science.gov (United States)

    2013-12-12

    ... practices for compliance with Designated Contract Market (``DCM'') core principle 5 and Swap Execution Facility (``SEF'') core principle 6 in respect of exchange- set speculative position limits and position... To Become Guidance on and Acceptable Practices for Compliance with DCM Core Principle 5 3. The CFTC...

  18. 28 CFR 513.31 - Limitations.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Limitations. 513.31 Section 513.31 Judicial Administration BUREAU OF PRISONS, DEPARTMENT OF JUSTICE GENERAL MANAGEMENT AND ADMINISTRATION... published in 5 CFR part 297 and by Department of Justice regulations published in 28 CFR part 16. ...

  19. Hanford defined waste model limitations and improvements

    International Nuclear Information System (INIS)

    HARMSEN, R.W.

    1999-01-01

    Recommendation 93-5 Implementation Plan, Milestone 5,6.3.1.i requires issuance of this report which addresses ''updates to the tank contents model''. This report summarizes the review of the Hanford Defined Waste, Revision 4, model limitations and provides conclusions and recommendations for potential updates to the model

  20. The capacity limitations of orientation summary statistics

    Science.gov (United States)

    Attarha, Mouna; Moore, Cathleen M.

    2015-01-01

    The simultaneous–sequential method was used to test the processing capacity of establishing mean orientation summaries. Four clusters of oriented Gabor patches were presented in the peripheral visual field. One of the clusters had a mean orientation that was tilted either left or right while the mean orientations of the other three clusters were roughly vertical. All four clusters were presented at the same time in the simultaneous condition whereas the clusters appeared in temporal subsets of two in the sequential condition. Performance was lower when the means of all four clusters had to be processed concurrently than when only two had to be processed in the same amount of time. The advantage for establishing fewer summaries at a given time indicates that the processing of mean orientation engages limited-capacity processes (Experiment 1). This limitation cannot be attributed to crowding, low target-distractor discriminability, or a limited-capacity comparison process (Experiments 2 and 3). In contrast to the limitations of establishing multiple summary representations, establishing a single summary representation unfolds without interference (Experiment 4). When interpreted in the context of recent work on the capacity of summary statistics, these findings encourage reevaluation of the view that early visual perception consists of summary statistic representations that unfold independently across multiple areas of the visual field. PMID:25810160