WorldWideScience

Sample records for bus driving

  1. Study of bus driving parameters on urban route

    OpenAIRE

    Fuad DASHDAMIROV

    2011-01-01

    The article deals with bus traffic time and speed on stage and route in the whole. The factors affecting bus driving parameters are divided into groups. The factors of significant impact are found in each group. The method of consideration of such factors impact on driving parameters in timetable making, is proposed. The extent of impact of selected factors on bus driving time and speed is studied.

  2. Statistical Analysis for the Driving Cycle of Beijing's Bus

    Institute of Scientific and Technical Information of China (English)

    王震坡; 孙逢春; 王军; 孙立清

    2004-01-01

    According to the test data of the driving model for Beijing's bus routes, 9 parameters and the actual values of Beijing bus are confirmed to evaluate the driving cycle, 2 ways of establishing driving cycle model are analyzed, the formula of calculating driving cycle is acquired, and the calculating driving cycle model and the statistical driving cycle model for the buses in Beijing urban areas are set up. This study provides scientific basis for selecting the bus type and confirming the design parameters and the running method in Beijing.

  3. Analysis of Control Characteristic for the Drive System of Electric Transit Bus

    Institute of Scientific and Technical Information of China (English)

    张承宁; 李红林; 孙逢春; 张旺

    2003-01-01

    The drive control system of the permanent magnetic direct current motor with the enhanced magnetism windings used in the electric transit bus is developed. The mathematics model of the drive control system for this motor is established. The new mode that the added-exiting magnetism field could be weakened and the speed of the motor could be controlled automatically is proposed and realized. The method of root locus design is applied to analyze the acceleration control characteristic. The results of simulation show that the new drive motor control system has extraordinary response characteristic and adjustable performance. Experiments of vehicle running show that the drive control system's antijamming ability is strong and the adjustable performance is fast and smooth, it can meet the demand of power characteristic very well.

  4. The Metabolic Syndrome and its Association with Over Time Driving in Iranian Professional Bus Drivers

    Directory of Open Access Journals (Sweden)

    Afshin Blouri

    2010-01-01

    Full Text Available The aim of the study was to determine the prevalence of metabolic syndrome (MeS in professional bus drivers, and its association with overtime working hours among those drivers in Urmia, Iran. In this cross sectional study the studies population was 626 professional bus drivers, aged 20-69 yr. The MeS (according to the National Cholesterol Education Program Adult Treatment Panel III, Waist circumference, Systolic blood pressure, Diastolic blood pressure, Fasting plasma glucose, Triglyceride, HDL-cholesterol, age, and working time per week. The overall prevalence of the metabolic syndrome was 32.4%. The prevalence of the MeS was higher than the general Iranian population. There was a statistically significant positive relationship between over time driving and MeS (P: 0.028. This represents an odds ratio of 1.46 (95%CI: 1.04 – 2.05. The metabolic syndrome is becoming a noteworthy health problem in bus drivers; therefore, early detection and appropriate intervention need to be established.

  5. Extracting DC bus current information for optimal phase correction and current ripple in sensorless brushless DC motor drive

    Institute of Scientific and Technical Information of China (English)

    Zu-sheng HO; Chii-maw UANG; Ping-chieh WANG

    2014-01-01

    Brushless DC motor (BLDCM) sensorless driving technology is becoming increasingly established. However, op-timal phase correction still relies on complex calculations or algorithms. In finding the correct commutation point, the problem of phase lag is introduced. In this paper, we extract DC bus current information for auto-calibrating the phase shift to obtain the correct commutation point and optimize the control of BLDC sensorless driving. As we capture only DC bus current information, the original shunt resistor is used in the BLDCM driver and there is no need to add further current sensor components. Software processing using only simple arithmetic operations successfully accomplishes the phase correction. Experimental results show that the proposed method can operate accurately and stably at low or high speed, with light or heavy load, and is suitable for practical applications. This approach will not increase cost but will achieve the best performance/cost ratio and meet market expectations.

  6. The Metabolic Syndrome and its Association with Over Time Driving in Iranian Professional Bus Drivers

    OpenAIRE

    Afshin Blouri; Ali Saba; Amin Shirazi; Farnaz Nabizadeh; Maghsoud Matinkhah; Iraj Mohebbi

    2010-01-01

    The aim of the study was to determine the prevalence of metabolic syndrome (MeS) in professional bus drivers, and its association with overtime working hours among those drivers in Urmia, Iran. In this cross sectional study the studies population was 626 professional bus drivers, aged 20-69 yr. The MeS (according to the National Cholesterol Education Program Adult Treatment Panel III), Waist circumference, Systolic blood pressure, Diastolic blood pressure, Fasting plasma glucose, Triglyceride...

  7. 深圳市公交车行驶工况研究%Study on Shenzhen Bus Route Driving Cycle

    Institute of Scientific and Technical Information of China (English)

    张超; 徐鹏; 李程宇; 吴正斌

    2015-01-01

    The performance of automotive under speciifc drive cycles can provide a reference for the development and improvement of vehicle systems. At present, there is no representative typical driving cycle in Shenzhen. In this paper, the development of M347 bus route driving cycle in Shenzhen was reported, combining principal component analysis and clustering analysis methods, and the rationality and the validity of the driving cycle were tested and veriifed. The original micro-trips are divided into two series by the clustering analysis method, which may explain trafifc jam and smooth trafifc driving conditions of M347 bus route. The M347 route multiple driving cycle constructed at last can relfect the real-world road conditions.%车辆在特定道路工况条件下的性能能够为汽车系统的设计和改进提供参考。目前,深圳市还没有建立起典型的城市道路工况。文章基于深圳市 M347路公交车的行驶数据,利用主成分分析法和聚类分析法来构建公交车线路行驶工况。由聚类分析将原始短行程数据分为两类,可以体现公交线路中拥挤和畅通两种不同行驶状况。文章所构建的综合工况能较好地反映该线路的道路工况,对于研究分析具有深圳特点的行驶工况和优化车辆性能具有一定参考意义。

  8. Statistical Characterization of School Bus Drive Cycles Collected via Onboard Logging Systems

    Energy Technology Data Exchange (ETDEWEB)

    Duran, A.; Walkowicz, K.

    2013-10-01

    In an effort to characterize the dynamics typical of school bus operation, National Renewable Energy Laboratory (NREL) researchers set out to gather in-use duty cycle data from school bus fleets operating across the country. Employing a combination of Isaac Instruments GPS/CAN data loggers in conjunction with existing onboard telemetric systems resulted in the capture of operating information for more than 200 individual vehicles in three geographically unique domestic locations. In total, over 1,500 individual operational route shifts from Washington, New York, and Colorado were collected. Upon completing the collection of in-use field data using either NREL-installed data acquisition devices or existing onboard telemetry systems, large-scale duty-cycle statistical analyses were performed to examine underlying vehicle dynamics trends within the data and to explore vehicle operation variations between fleet locations. Based on the results of these analyses, high, low, and average vehicle dynamics requirements were determined, resulting in the selection of representative standard chassis dynamometer test cycles for each condition. In this paper, the methodology and accompanying results of the large-scale duty-cycle statistical analysis are presented, including graphical and tabular representations of a number of relationships between key duty-cycle metrics observed within the larger data set. In addition to presenting the results of this analysis, conclusions are drawn and presented regarding potential applications of advanced vehicle technology as it relates specifically to school buses.

  9. Effect of B20 and Low Aromatic Diesel on Transit Bus NOx Emissions Over Driving Cycles with a Range of Kinetic Intensity

    Energy Technology Data Exchange (ETDEWEB)

    Lammert, M. P.; McCormick, R. L.; Sindler, P.; Williams, A.

    2012-10-01

    Oxides of nitrogen (NOx) emissions for transit buses for up to five different fuels and three standard transit duty cycles were compared to establish whether there is a real-world biodiesel NOx increase for transit bus duty cycles and engine calibrations. Six buses representing the majority of the current national transit fleet and including hybrid and selective catalyst reduction systems were tested on a heavy-duty chassis dynamometer with certification diesel, certification B20 blend, low aromatic (California Air Resources Board) diesel, low aromatic B20 blend, and B100 fuels over the Manhattan, Orange County and UDDS test cycles. Engine emissions certification level had the dominant effect on NOx; kinetic intensity was the secondary driving factor. The biodiesel effect on NOx emissions was not statistically significant for most buses and duty cycles for blends with certification diesel, except for a 2008 model year bus. CARB fuel had many more instances of a statistically significant effect of reducing NOx. SCR systems proved effective at reducing NOx to near the detection limit on all duty cycles and fuels, including B100. While offering a fuel economy benefit, a hybrid system significantly increased NOx emissions over a same year bus with a conventional drivetrain and the same engine.

  10. A Liquid Crystal Displayed Method of I/O Bus Driving Based on CPLD%一种基于CPLD的I/O总线驱动液晶显示的方法

    Institute of Scientific and Technical Information of China (English)

    程晓东; 郑为民; 唐志敏

    2003-01-01

    The paper discusses a new kind of driving the LCD via I/O bus using CPLD and realizing the precise I/Ocontrol timing sequence by establishing the corresponding Verilog-HDL model. The results of application show thatthis solution can not only solve the matching of low-speed device with high-speed bus but also provide the display in-terface during the motherboard debugging process, and also prove that the whole system is reliable and stable.

  11. The erigone bus study

    International Nuclear Information System (INIS)

    A study has been made of some factors determining the performance and cost-effectiveness of microcomputer bus systems implemented in Europa crates. An experimental system has been specified and a number of modules constructed in accordance with the specification, in order to test the validity of some of the ideas proposed. It has been demonstrated that the bus interfacing logic can be simple and inexpensive, while maintaining a high degree of processor independence and also a high degree of transparency in operation. The number of pins required by the bus is minimized by multiplexing address and data. A series termination for the drive of the multiplexed lines permits cross-talk to be reduced to insignificant levels: this technique is recommended for wider application. The experimental bus is proposed as a basis for the construction of simple microcomputer-based instrumentation systems. (orig.)

  12. Savannah River bus project

    Energy Technology Data Exchange (ETDEWEB)

    Summers, W.A. [Westinghouse Savannah River Co., Aiken, SC (United States)

    1998-08-01

    The H2Fuel Bus is the world`s first hybrid hydrogen electric transit bus. It was developed through a public/private partnership involving several leading technology and industrial organizations in the Southeast, with primary funding and program management provided by the Department of Energy. The primary goals of the project are to gain valuable information on the technical readiness and economic viability of hydrogen buses and to enhance the public awareness and acceptance of emerging hydrogen technologies. The bus has been operated by the transit agency in Augusta, Georgia since April, 1997. It employs a hybrid IC engine/battery/electric drive system, with onboard hydrogen fuel storage based on the use of metal hydrides. Initial operating results have demonstrated an overall energy efficiency (miles per Btu) of twice that of a similar diesel-fueled bus and an operating range twice that of an all-battery powered electric bus. Tailpipe emissions are negligible, with NOx less than 0.2 ppm. Permitting, liability and insurance issues were addressed on the basis of extensive risk assessment and safety analyses, with the inherent safety characteristic of metal hydride storage playing a major role in minimizing these concerns. Future plans for the bus include continued transit operation and use as a national testbed, with potential modifications to demonstrate other hydrogen technologies, including fuel cells.

  13. BUS 650 UOP Material - bus650dotcom

    OpenAIRE

    lucky108

    2015-01-01

    For more course tutorials visit www.bus650.com BUS 650 Week 1 DQ 1 The Role of Financial Management in a Firm BUS 650 Week 1 DQ 2 Short Term or Long Term View BUS 650 Week 1 Financial Management Challenges BUS 650 Week 2 DQ 1 Initial Investment BUS 650 Week 2 DQ 2 Managing Earnings BUS 650 Week 2 Return on Investment Education Funding BUS 650 Week 3 DQ 1 GAAP vs. IFRS BUS 650 Week 3 DQ 2 Capital Rationing BUS 650 Week 3 Journal Capital Budgeting BUS 650 Week 3 Management of Working Capital Ca...

  14. Common-mode DC-bus filter design for variable-speed drive system via transfer ratio measurements

    NARCIS (Netherlands)

    Zhao, D.; Ferreira, J.A.; Roc'h, A.; Leferink, F.

    2009-01-01

    Filters used in electromagnetic interference suppression are often described in literature on drive systems and have become a standard solution in industry. The effect of the commercial off-the-shelf filter depends significantly on how it is installed. A model that includes the installation paramete

  15. 基于公交循环工况的LCK6105HGN动力系统匹配研究%Research on Matching of LCK6105HGN Powertrain System Based on Bus Driving Cycle

    Institute of Scientific and Technical Information of China (English)

    张红; 郑泽亮

    2016-01-01

    动力系统匹配好坏直接关系到整车的动力性、经济性,并且与行驶路况密切相关。本文根据实测的公交路谱,运用相关理论和统计分析软件建立城市客车行驶循环工况,并基于该循环工况,利用Cruise软件进行动力系统匹配计算。%The matching of powertrain system is directly related to the vehicle's power and economy, and also closely related to the driving road conditions. According to the measured bus road spectrum, the authors establish the bus driving cycle by using the relevant theory and statistical analysis software, and match and calculate the powertrain system with Cruise software based on this cycle condition.

  16. BUS 372 ASH Material - bus372dotcom

    OpenAIRE

    lucky108

    2015-01-01

    For more course tutorials visit www.bus372.com       BUS 372 Week 1 DQ 1 The Role of Unionization (Ash Course) BUS 372 Week 1 DQ 2 Meeting Member Needs (Ash Course) BUS 372 Week 2 DQ 1 Profit Interest and Employee Interest (Ash Course) BUS 372 Week 2 DQ 2 Union Requirements (Ash Course) BUS 372 Week 2 Assignment Changing Landscape of Unions (Ash Course) BUS 372 Week 2 Quiz (Ash Course) BUS 372 Week 3 DQ 1 Strikes (Ash Course) BUS ...

  17. BUS 372 Tutorials / bus372dotcom

    OpenAIRE

    sunshine3811

    2015-01-01

    For more course tutorials visit www.bus372.com       BUS 372 Week 1 DQ 1 The Role of Unionization (Ash Course) BUS 372 Week 1 DQ 2 Meeting Member Needs (Ash Course) BUS 372 Week 2 DQ 1 Profit Interest and Employee Interest (Ash Course) BUS 372 Week 2 DQ 2 Union Requirements (Ash Course) BUS 372 Week 2 Assignment Changing Landscape of Unions (Ash Course) BUS 372 Week 2 Quiz (Ash Course) BUS 372 Week 3 DQ 1 Strikes (Ash Course) BUS ...

  18. BUS 401 Courses / bus401tutorialdotcom

    OpenAIRE

    uophelp

    2015-01-01

     FOR MORE CLASSES VISIT www.bus401tutorial.com BUS 401 Week 1 DQ 1 Corporate Income Tax and Real Interest Rates (Ash Course) BUS 401 Week 1 DQ 2 Cash Flow and Ratio Analysis (Ash Course)  BUS 401 Week 1 Assignment Ratio Analysis (Ash Course) BUS 401 Week 1 Quiz (Ash Course) BUS 401 Week 2 DQ 1 Annuity and Capital Asset Pricing (Ash Course) BUS 401 Week 2 DQ 2 Bonds and Common Stock (Ash Course) BUS 401 Week 2 Assignment Alternative Investments (Ash Co...

  19. BUS 401 COURSES / bus401tutordotcom

    OpenAIRE

    uophelp

    2015-01-01

    FOR MORE CLASSES VISIT www.bus401tutor.com   BUS 401 Week 1 DQ 1 Corporate Income Tax and Real Interest Rates (Ash Course) BUS 401 Week 1 DQ 2 Cash Flow and Ratio Analysis (Ash Course)  BUS 401 Week 1 Assignment Ratio Analysis (Ash Course) BUS 401 Week 1 Quiz (Ash Course) BUS 401 Week 2 DQ 1 Annuity and Capital Asset Pricing (Ash Course) BUS 401 Week 2 DQ 2 Bonds and Common Stock (Ash Course) BUS 401 Week 2 Assignment Alternative Investments (Ash ...

  20. 可调式风扇传动安装座在客车上的应用%Application of an Adjustable Fan Drive Installed Stand to Bus/Coach

    Institute of Scientific and Technical Information of China (English)

    叶成友

    2015-01-01

    Aiming at the abnormal wear and fracture problems of the belts with traditional fan drive equipment on a bus/coach, the author introduces a type of a solution of adjustable fan drive installation stand. This can completely solve the problem of fan drive belts abnormal wear and fracture, prolong the service life and reduce the maintenance cost.%针对目前客车上采用传统风扇传动装置存在皮带异常磨损和断裂的问题,介绍一种可调式风扇传动安装座的解决方案,彻底解决风扇传动皮带异常磨损和断裂的问题,延长使用寿命和降低维护保养成本。

  1. BUS 660 ASH Course Tutorial / bus660dotcom

    OpenAIRE

    vasanthi moola

    2015-01-01

    BUS 660 Entire Course For more course tutorials visit www.bus660.com   BUS 660 Week 1 Assignment Developing Leaders at UPS BUS 660 Week 2 Assignment Leadership Style BUS 660 Week 3 Assignment Leadership Traits BUS 660 Week 4 Assignment Leadership Skills BUS 660 Week 5 Assignment Big Changes for a Small Hospital BUS 660 Week 6 Assignment Research Paper BUS 660 Week 1 DQ 1 Leadership Defined BUS 660 Week 1 DQ 2 Education and Experience BUS 66...

  2. Energy efficiency of different bus subsystems in Belgrade public transport

    Directory of Open Access Journals (Sweden)

    Mišanović Slobodan M.

    2015-01-01

    Full Text Available Research in this paper comprised experimental determination of energy efficiency of different bus subsystems (diesel bus, trolleybus and fully electric bus on chosen public transport route in Belgrade. Experimental measuring of energy efficiency of each bus type has been done based on the analysis of parameters of vehicle driving cycles between stops. Results of this analysis were basis for development of theoretical simulation model of energy efficiency. The model was latter compared with the results of simulation done by "Solaris bus & Coach" company for the chosen electric bus route. Based on demonstrated simulation, characteristics of electric bus batteries were defined, the method and dynamic of their recharge was suggested, as well as choice for other aggregates for drive system and technical characteristics for the electric buses were suggested.

  3. The Strength Analysis of a driving axle housing for a low-floor bus%某低地板客车用驱动桥壳强度分析

    Institute of Scientific and Technical Information of China (English)

    郭克刚; 王锋刚; 肖云娜

    2012-01-01

    This article describes the form of installation and main technical parameters of a driving axle for a low-floor bus, and provides an analytical method for driving axle housing, then does the strength analysis for the driving axle housing in the following typical working conditions: vertical bending, braking, comering and maximum traction conditions based on finite element analysis software HyperWorks. The above analysis results of the text provide some reference for finite element analysis of the follow-up to the driving axle housing.%本文介绍了某低地板客车用驱动桥的安装形式及主要技术参数,基于有限元分析软件HyperWorks提供了一种驱动桥壳的分析方法,并对该驱动桥壳进行了以下典型工况的强度分析:垂直弯曲、制动、转弯和最大牵引力工况。本文对后续驱动桥壳的有限元分析具有一定的参考作用。

  4. Common Traffic Violations of Bus Drivers in Urban China: An Observational Study

    OpenAIRE

    Qiqi Wang; , Wei Zhang; Rendong Yang; Yuanxiu Huang; Lin Zhang; Peishan Ning; Xunjie Cheng; Schwebel, David C; Guoqing Hu; Hongyan Yao

    2015-01-01

    Objective To report common traffic violations in bus drivers and the factors that influence those violations in urban China. Methods We conducted an observational study to record three types of traffic violations among bus drivers in Changsha City, China: illegal stopping at bus stations, violating traffic light signals, and distracted driving. The behaviors of bus drivers on 32 routes (20% of bus routes in the city) were observed. A two-level Poisson regression examined factors that predicte...

  5. Drivetrain system of an ultracapacitor electric bus

    Institute of Scientific and Technical Information of China (English)

    Kong Zhigu; Zhu Chunbo; Yang Shiyan; Cheng Shukang

    2007-01-01

    This paper proposed a design of the drivetrain system of an electric bus with ultracapacitor (UC) as the only on-board power source. The system includes three main parts, namely, UC bank, motor and the converter, vehicle management unit (VMU). Analyses results in detail on the functional design and experiments on work bench of each part were also presented, which validated the reliability of the system. Furthermore, driving results in field of the bus verified the feasibility of the design of the drivetrain system. The bus has very good dynamic performances and shows a promising applications prospect in the short and medium route buses system.

  6. Examination of an Urban City Bus Operating Conditions and Emissions

    OpenAIRE

    Soylu, Seref (Coordinador); Bal, Ayda; Semercioglu, Hulya; Ay, Eyup Fatih

    2010-01-01

    It was observed that real world driving characteristics of the city bus don’t correlate well with that of the ETC, which is the certification cycle for the city bus engines. For this reason it is not realistic to expect emission levels lower than corresponding EURO standards from the city bus during real world driving. City bus NOx emissions in terms of grams per second are increasing with engine load and speed but the total NOx emissions for entire trip are the maximum at the locations whe...

  7. Systems evaluation of thermal bus concepts

    Science.gov (United States)

    Stalmach, D. D.

    1982-01-01

    Thermal bus concepts, to provide a centralized thermal utility for large, multihundred kilowatt space platforms, were studied and the results are summarized. Concepts were generated, defined, and screened for inclusion in system level thermal bus trades. Parametric trade studies were conducted in order to define the operational envelope, performance, and physical characteristics of each. Two concepts were selected as offering the most promise for thermal bus development. All of four concepts involved two phase flow in order to meet the required isothermal nature of the thermal bus. Two of the concepts employ a mechanical means to circulate the working fluid, a liquid pump in one case and a vapor compressor in another. Another concept utilizes direct osmosis as the driving force of the thermal bus. The fourth concept was a high capacity monogroove heat pipe. After preliminary sizing and screening, three of these concepts were selected to carry into the trade studies. The monogroove heat pipe concept was deemed unsuitable for further consideration because of its heat transport limitations. One additional concept utilizing capillary forces to drive the working fluid was added. Parametric system level trade studies were performed. Sizing and weight calculations were performed for thermal bus sizes ranging from 5 to 350 kW and operating temperatures in the range of 4 to 120 C. System level considerations such as heat rejection and electrical power penalties and interface temperature losses were included in the weight calculations.

  8. BUS 210 Course tutorial/ indigohelp

    OpenAIRE

    WVFD

    2015-01-01

    For more classes visit www.indigohelp.com   BUS 210 Week 1 DQ1 and DQ2 BUS 210 Week 1 Checkpoint Business Models and Systems (2 Sets) BUS 210 Week 1 Knowledge Check BUS 210 Week 2 CheckPoint Business Organization  (2 Sets) BUS 210 Week 2 Knowledge Check BUS 210 Week 2 Assignment Evolution of Business Presentation (2 Sets) BUS 210 Week 3 DQ 1 and DQ 2 BUS 210 Week 3 CheckPoint Code of Ethics (2 Sets) BUS 210 Week 3 Knowledge Check BUS 2...

  9. PCI bus demystified

    CERN Document Server

    Abbott, Doug

    2004-01-01

    The peripheral component interconnect (PCI) bus is the dominant bus system used to connect the different elements making up today''s high-performance computer systems. Different PCI implementations have also been developed for such applications as telecommunications and embedded computing. If an application calls for high speed, high reliability, flexible configuration, and bus mastering, then PCI is the only logical bus choice. This book is an applications-oriented introduction to the PCI bus, with an emphasis on implementing PCI in a variety of computer architectures. Special attention is given to industrial and mission-critical applications of PCI bus.·Fully describes PCI electrical specifications, mechanical requirements, and signal types·Covers advanced topics through numerous design examples to increase the readers understanding of the subject ·Includes updated coverage of PCI-X 2.0

  10. Intelligent Bus Stops in the Flexible Bus Systems

    Directory of Open Access Journals (Sweden)

    Razi Iqbal

    2014-09-01

    Full Text Available The purpose of this paper is to discuss Intelligent Bus Stops in a special Demand Responsive Transit (DRT, the Flexible Bus System. These Intelligent Bus Stops are more efficient and information rich than Traditional Bus Stops. The real time synchronization of the Flexible Bus System makes it unique as compared to Traditional Bus Systems. The Main concern is to make Bus Stops intelligent and information rich. Buses are informed about the no. of passengers waiting at the upcoming Bus Stops. If there are no passengers to ride or get off on upcoming Bus Stop, the Bus can skip that Bus Stop and head towards the next Bus Stop where passenger is waiting, which will decrease the ride time of the passengers on the Bus and also the wait time of the passengers waiting on the upcoming Bus Stops. Providing more information at Bus Stops about the Destination (Time to Destination, Distance to Destination etc. and Buses (Bus Location, Arrival Time of Bus etc. makes it easier for the passengers to decide whether to ride a particular Bus or not.

  11. TPG bus passes

    CERN Multimedia

    Staff Association

    2013-01-01

    The CERN Staff Association will stop selling TPG bus passes. All active and retired members of the CERN personnel will be able to purchase Unireso bus passes from the CERN Hostel - Building 39 (Meyrin site) from 1st February 2013. For more information: https://cds.cern.ch/journal/CERNBulletin/2013/04/Announcements/1505279?ln=en

  12. Control Strategy of SOC Open-Loop of Hybrid Electric Bus Based on Driving Cycle Prediction%基于道路工况预测混合动力公交车SOC开环控制策略

    Institute of Scientific and Technical Information of China (English)

    朱道伟; 谢辉; 严英

    2012-01-01

    混合动力车辆一般采用基于荷电状态(SOC)闭环的控制策略,对蓄电池组进行频繁充电,使SOC维持在较高水平,影响制动能量的回收,从而导致燃油经济性不理想.为此,利用BP神经网络并结合城市公交运行特点,提出SOC开环控制策略,对公交车未来站点间的运行工况进行预测,减少蓄电池组的充电次数,降低蓄电池组的荷电状态.试验表明,采用该控制策略可以显著降低电池组充电时间和次数,有利于制动能量的回收,百公里油耗降低了3%.%The conventional strategy of hybrid electric vehicle was based on the state of charge (SOC) closed-loop which charged the battery frequently to sustain a high-level SOC and decreased the fuel efficiency because the energy from the regenerative braking couldn't be stored any more. SOC open-loop control strategy was proposed using the BP neural network and considering the trait of city bus to predict the next driving cycles between two stops in short future. Experiment result shows that the control strategy is useful to decrease charging times and time-period, which improve fuel efficiency by 3% higher than the vehicle on the route with the control strategy of SOC closed-loop because of enhanced regenerative braking energy.

  13. An Experimental Study on the PM and NOx Emission Characteristics of Public Bus in Real Driving Condition in Beijing%北京道路工况下公交车PM和NOx排放特性试验研究

    Institute of Scientific and Technical Information of China (English)

    高继东; 秦孔建; 梁荣亮; 李孟良

    2011-01-01

    利用综合性车载排放测试系统完成北京典型柴油公交车在道路工况下排放特性的试验研究.结果表明,匀速行驶工况下的NOx排放率与车速呈正线性相关;平均车速为13.3km/h的低速拥堵工况的NOx排放因子是平均车速为41.1km/h的高速畅通工况的近两倍;研究表明,在低速加速的起步过程和低负荷工况下出现较严重的PM排放,须针对这两种工况优化发动机的燃烧品质.%An experimental study is conducted on the emission characteristics of typical public diesel bus in real driving condition in Beijing by using integrated portable emission measurement system. The results show that the emission rates of NOX exhibit a linear relationship with vehicle speed in cruising condition; while the emission factor of NO, in low-speed traffic jam condition with an average speed of 13. 3 km/h is nearly twice higher than that in high speed clear road condition with an average speed of 41. 1 km/h. The study also indicates that relatively severe PM emission appears in low-speed starting acceleration period and low load condition so the combustion quality of engine in these both conditions must be optimized.

  14. Improved design of HIRFL-CSR EVME bus controller

    International Nuclear Information System (INIS)

    The EVME bus controller which is a key component of the HIRFL-CSR control system was improved. Besides reconfiguring the embedded Linux, a utility program was developed for data exchange between the controller and the database. The bus controller is based on ARM920T(ARM9) micro processor which is BGA packaged. The bus controller has the universal interface of VGA display, keyboard, and mouse. The backboard interface logic is programmed in an in-system configurable FPGA device. The bus can drive high current up to 64 mA, with the flexibility of the programmable signal definitions. All the improved performance helped the EVME bus controller play a crucial role in HIRFL-CSR control system. (authors)

  15. 昆联式昆合动力城市客车动力系统的匹配及控制策略研究%Research on Drive Train Matching for a Series-parallel Hybrid Electric City Bus and Its Control Strategy

    Institute of Scientific and Technical Information of China (English)

    雷良育; 张培培; 赵大旭; 刘建军

    2011-01-01

    Based on the drive train for series-parallel hybrid electric vehicle that can make more combination between engines, generators, motors and so on,and the system can be ensured to work under the better conditions from the structure. By matching and analyzing on the drive train for series-parallel hybrid electric city bus,it is advanced that matching scheme and control strategy were proposed on drive train for series-parallel hybrid electric city bus,also,a sample bus was developed successfully. By the demonstration, it is indicated that the vehicle performance of drive and economy meets the design demands. The sample vehicle has better result in saving oil and can provide the reference for the scale demonstration.%混联式混合动力系统能够使发动机、发电机、电动机等部件间有更多的组合,并在结构上保证系统能在复杂的工况下工作在最优状态.通过对混联式混合动力城市客车动力系统的匹配和分析,提出了一种混联式动力系统的匹配方案和控制策略并成功开发出样车.示范运行结果表明,整车动力性及经济性满足设计要求,节油效果良好,可为规模化示范运行提供依据.

  16. Bus.py

    Energy Technology Data Exchange (ETDEWEB)

    2014-07-21

    GridLAB-D is an agent? based distribution system simulation environment that allows fine-grained end-user models, including geospatial and network topology detail. GridLAB-D addresses the lack of runtime interaction by designing a flexible communication interface, Bus.py (pronounced bus-dot-pie), that uses Python to pass messages between one or more GridLAB-D instances and a Smart Grid simulator.

  17. LHC on the bus

    CERN Document Server

    Laëtitia Pedroso

    2010-01-01

    On 15 December, an airport bus will be transformed in the image of CERN. The bus will be seen by the thousands of travellers arriving in Geneva, informing them of the possibility to visit CERN.   Sketch of the bus. The good relationship between Geneva International Airport and CERN started several years ago. In 2004 the airport put advertising space in the arrivals area at CERN's disposal free of charge. Now, starting on 15 December, a 40-foot long bus will display a giant sticker advertisement depicting CERN as it takes passengers over the airport tarmac to their planes. This is no ordinary sticker, and it was no mean task to attach it to the bus. The task of producing and attaching it was entrusted to Geneva-based specialists Mathys SA. With the ski season opening on 15 December, there will be many travellers arriving at the airport, and the bus will be ready to receive them. When one thinks of CERN, the subjects that naturally come to mind are the LHC, the mysteries of the Universe...

  18. BUS 660 Ash course tutorial / uophelp

    OpenAIRE

    uophelp

    2015-01-01

      www.uophelp.com         BUS 660 Week 1 Assignment Developing Leaders at UPS BUS 660 Week 2 Assignment Leadership Style BUS 660 Week 3 Assignment Leadership Traits BUS 660 Week 4 Assignment Leadership Skills BUS 660 Week 5 Assignment Big Changes for a Small Hospital BUS 660 Week 6 Assignment Research Paper BUS 660 Week 1 DQ 1 Leadership Defined BUS 660 Week 1 DQ 2 Education and Experience BUS 660 Week 2 DQ 1 Lea...

  19. Composite braking control strategy of pure electric bus based on brake driving intention recognition%基于制动驾驶意图辨识的纯电动客车复合制动控制策略

    Institute of Scientific and Technical Information of China (English)

    赵轩; 马建; 汪贵平

    2014-01-01

    To research braking force distribution ratio of composite braking system for pure electric bus,a composite braking control strategy based on brake driving intention recognition was presented.A double-layer brake driving intention recognition model based on hidden Markov theory was set up and identified by using road experiment data.Based on recognized driving intention and vehicle speed,the distribution ratios of braking forces for front and rear wheels, ECE regulation, motor characteristics, slip ratios, battery characteristics, super capacitor characteristics and transmission system characteristics were taken as constraint conditions,the braking force distribution strategy of composite braking system was proposed,and the control strategy of composite braking system was simulated by Simulink software under 9 operating conditions.Simulation result shows that friction braking system and motor regenerative braking system can work coordinately and steadily under various operating conditions when the braking control strategy is applied,and braking energy can be recovered as much as possible under the premise of ensuring braking safety.Energy recovery efficiency is highest under slight brake when vehicle speed was low,and the efficiency can reach to 43 .84%.Energy recovery efficiency is lowest under emergency brake when vehicle speed is high,and the efficiency is only 0. 89%. 2 tabs,21 figs,23 refs.%为了研究纯电动客车复合制动系统制动力分配比例,提出了基于制动驾驶意图辨识的复合制动控制策略。基于隐形马尔科夫理论建立了双层制动驾驶意图辨识模型,运用道路试验数据对模型进行辨识验证。基于辨识出的驾驶意图和车速,以前后轮制动力分配比例、ECE 法规、电机特性、滑移率、蓄电池特性、超级电容特性与传动系统特性为约束条件,制定了复合制动系统制动力分配策略,在9种工况下,应用Simulink对复合制动系统进行建

  20. Common Traffic Violations of Bus Drivers in Urban China: An Observational Study.

    Directory of Open Access Journals (Sweden)

    Qiqi Wang

    Full Text Available To report common traffic violations in bus drivers and the factors that influence those violations in urban China.We conducted an observational study to record three types of traffic violations among bus drivers in Changsha City, China: illegal stopping at bus stations, violating traffic light signals, and distracted driving. The behaviors of bus drivers on 32 routes (20% of bus routes in the city were observed. A two-level Poisson regression examined factors that predicted bus driver violations.The incidence of illegal stopping at bus stations was 20.2%. Illegal stopping was less frequent on weekends, sunny days, and at stations with cameras, with adjusted incidence rate ratios (IRRs of 0.81, 0.65 and 0.89, respectively. The incidence of violating traffic light signals was 2.2%, and was lower on cloudy than sunny days (adjusted IRR: 0.60. The incidence of distracted driving was 3.3%. The incidence of distracted driving was less common on cloudy days, rainy or snowy days, and foggy/windy/dusty days compared to sunny days, with adjusted IRRs of 0.54, 0.55 and 0.07, respectively.Traffic violations are common in bus drivers in urban China and they are associated with the date, weather, and presence of traffic cameras at bus station. Further studies are recommended to understand the behavioral mechanisms that may explain bus driver violations and to develop feasible prevention measures.

  1. BusTechn

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Introduced the characteristics of series communicat io n I 2C bus and basic communication protocol, and introduced the application of the bus I 2C according to the image sensor OV7610.The computer correspondence s tyle can be divided the parallel correspondence and the series correspondence. T he rate of series correspondence is rapid, and the property of real time is exce llent. Because the number of ports which it takes is great, it is not proper to miniaturize. Whereas the rate of series corresponden...

  2. Learning NServiceBus

    CERN Document Server

    Boike, David

    2013-01-01

    This is a practical tutorial containing hands-on examples for creating a messaging and SOA based service bus.This book is for .NET developers who are looking for ways to overcome problems related to buggy third party web service integrations, codebases that have grown into a big ball of mud, and batch jobs failure.

  3. BUS 401 Ash course tutorial / uophelp

    OpenAIRE

    uophelp

    2015-01-01

    For more course tutorials visit www.uophelp.com   BUS 401 Week 1 DQ 1 Corporate Income Tax and Real Interest Rates BUS 401 Week 1 DQ 2 Cash Flow and Ratio Analysis BUS 401 Week 1 Assignment Ratio Analysis BUS 401 Week 1 Quiz BUS 401 Week 2 DQ 1 Annuity and Capital Asset Pricing BUS 401 Week 2 DQ 2 Bonds and Common Stock BUS 401 Week 2 Assignment Alternative Investments BUS 401 Week 2 Quiz BUS 401 Week 3 DQ 1 NPV, PI, and IRR BUS 401 Week 3 ...

  4. BUS 437 UOP Course Tutorial/ Tutorialrank

    OpenAIRE

    john

    2015-01-01

    For more course tutorials visit www.tutorialrank.com Tutorial Purchased: 4 Times, Rating: A+   ASHFORD BUS 437 Week 1 Assignment Company Description ASHFORD BUS 437 Week 1 DQ 1 Writing the Business Plan ASHFORD BUS 437 Week 1 DQ 2 Using Outside Help to Write the Plan ASHFORD BUS 437 Week 2 Assignment Marketing Section ASHFORD BUS 437 Week 2 DQ 1 Customer Survey ASHFORD BUS 437 Week 2 DQ 2 Industry Analysis ASHFORD BUS 437 Week 3 Assignment Strategy...

  5. BUS 402 Ash course tutorial / uophelp

    OpenAIRE

    uophelp-

    2015-01-01

    For more course tutorials visit www.uophelp.com     BUS 402 Week 1 DQ 1 Environmental Changes BUS 402 Week 1 DQ 2 Vision and Mission BUS 402 Week 2 DQ 1 Components of External Environment  BUS 402 Week 2 DQ 2 Components of Internal Analysis BUS 402 Week 2 Assignment Starbucks S.W.O.T. Analysis BUS 402 Week 3 DQ 1 Market Positioning Strategies BUS 402 Week 3 DQ 2 Vertical Integration BUS 402 Week 4 DQ 1 International Markets BUS 40...

  6. BUS 642 Ash course tutorial / uophelp

    OpenAIRE

    uophelp

    2015-01-01

    www.uophelp.com     BUS 642 Week 1 DQ 1 Scientific Thinking (Ash Course) BUS 642 Week 1 DQ 2 Making Research Decisions (Ash Course) BUS 642 Week 1 Exercises (Ash Course) BUS 642 Week 2 DQ 1 Ethics in Business Research (Ash Course) BUS 642 Week 2 DQ 2 Design of Research (Ash Course) BUS 642 Week 2 Exercises (Ash Course) BUS 642 Week 3 DQ 1 Measurement Scales (Ash Course) BUS 642 Week 3 DQ 2 Clarifying the Research Questions (Ash Course) BUS...

  7. BUS 437 Ash course tutorial / uophelp

    OpenAIRE

    uophelp

    2015-01-01

    For more course tutorials visit www.uophelp.com   BUS 437 Week 1 Assignment Company Description BUS 437 Week 1 DQ 1 Writing the Business Plan BUS 437 Week 1 DQ 2 Using Outside Help to Write the Plan BUS 437 Week 2 Assignment Marketing Section BUS 437 Week 2 DQ 1 Customer Survey BUS 437 Week 2 DQ 2 Industry Analysis BUS 437 Week 3 Assignment Strategy, Implementation, & Management Sections BUS 437 Week 3 DQ 1 Implementation BUS 437 Week 3 DQ ...

  8. 77 FR 48592 - Bus and Bus Facilities Discretionary Program Funds

    Science.gov (United States)

    2012-08-14

    ... authorized by 49 U.S.C. 5309(b), as amended by Section 3011 of the Safe, Affordable, Flexible, Efficient... Livability Initiatives (77 FR 6178). The NOFA explained the requirements and procedures for eligible... facilities, bus-related equipment, and transit asset management systems. The FY 2012 Bus...

  9. BUS 611 Ash course tutorial / uophelp

    OpenAIRE

    uophelp

    2015-01-01

    For more course tutorials visit www.uophelp.com   BUS 611 Week 1 Assignment Article Review (Ash Course) BUS 611 Week 2 Assignment Project Risk (Ash Course) BUS 611 Week 3 Assignment WBS (Ash Course) BUS 611 Week 4 Assignment Integrated Project Management Tools (Ash Course) BUS 611 Week 5 Assignment Monthly Status Reports (Ash Course) BUS 611 Week 6 Final Research Paper (Ash Course)  

  10. BUS 620 Ash course tutorial / uophelp

    OpenAIRE

    uophelp

    2015-01-01

    For more course tutorials visit www.uophelp.com   BUS 620 Week 1 DQ 1 What is Marketing (Ash Course) BUS 620 Week 1 DQ 2 Marketing Strategies (Ash Course) BUS 620 Week 1 The Future of the New York Times (Ash Course) BUS 620 Week 2 DQ 1 Buyer Behavior (Ash Course) BUS 620 Week 2 DQ 2 Customer Needs (Ash Course) BUS 620 Week 2 Industry Forecasting (Ash Course) BUS 620 Week 3 DQ 1 Braining Nordstrom (Ash Course) BUS 620 Week 3 DQ 2 Marketing Segmentat...

  11. Learning NServiceBus Sagas

    CERN Document Server

    Helton, Rich

    2015-01-01

    If you are an Enterprise C# developer who wishes to extend your knowledge of NServiceBus and Enterprise Service Bus in C#, this is the book for you. This book is designed to enhance the education of ESBs and their messaging, whether you are a beginner or a seasoned expert in Enterprise C#, Apex, and Visualforce pages.

  12. Standard satellite data bus initiative

    Science.gov (United States)

    Spinney, Timothy; Yousef, Hassan

    The USAF Space Technology Center manages programs to reduce satellite costs through the appropriate use of microelectronics standardization. Ongoing programs such as the Standard Spacecraft Memory Module and Generic VHSIC Spaceborne Computer have provided an insight into the value of standardization and led to an initiative to coordinate microelectronics development around a standard satellite data bus, which should reduce costs by eliminating program- and contractor-unique interfaces, increasing production runs, and developing generic test equipment. Current efforts focus on the satellite housekeeping functions, and it is expected that the mission payload would also use this data bus. Based on existing housekeeping data-traffic requirements, several candidates have been identified for the standard data bus. The two candidates selected for further work are the ANSI X3T9.5 data bus and the linear token-passing data bus being proposed as part of the Advanced Tactical Fighter effort.

  13. Effect of Educational Program to Decrease Substance Abuse among Suburban Bus Drivers Based on Theory of Planned Behavior

    OpenAIRE

    Moeini, B.; S. Bashirian; A. Moghimbeigi; V. Kafami; A.A. Mousali

    2015-01-01

    Introduction & Objective: Driving under the influence of drugs is considered a social pathology that has adverse effects on a society. This study aimed to investigate the effect of substance abuse educational program among the bus drivers on the basis of the theory of planned be-havior. Materials & Methods: This quasi-experimental study was conducted on 80 suburban bus drivers working at Hamadan transportation terminal. The bus drivers were randomly divided in two equal groups (intervention a...

  14. Health effect of a bus ride in an urban environment

    Energy Technology Data Exchange (ETDEWEB)

    Takano, T.

    1983-07-01

    Health effects on subjects during a bus drive on an urban road were investigated in a real situation. Leukocyte count, adrenalin level in blood and urine, noradrenalin and dopamine in urine, diastolic blood pressure, and index of vascular resistance increased significantly on the drive day compared with the control day. A bus drive on an urban road induced enhanced sympathetic-adreno-medullary activity in real life as a result of the comprehensive effect of various factors. The concentrations of air pollutants were excessively high on the road, and correlated with traffic volume. It was concluded that the interactions between psychogenic, physical nonspecific and physical specific effects should be taken into consideration when evaluating human health effects of air pollution in the urban environment.

  15. DIMETHYL ETHER (DME)-FUELED SHUTTLE BUS DEMONSTRATION PROJECT

    Energy Technology Data Exchange (ETDEWEB)

    Elana M. Chapman; Shirish Bhide; Jennifer Stefanik; Howard Glunt; Andre L. Boehman; Allen Homan; David Klinikowski

    2003-04-01

    the bus, operation on the campus shuttle route began in early June 2002. However, the work and challenges continued as it has been difficult to maintain operability of the shuttle bus due to fuel and component difficulties. In late June 2002, the pump head itself developed operational problems (loss of smooth function) leading to excessive stress on the magnetic coupling and excessive current draw to operate. A new pump head was installed on the system to alleviate this problem and the shuttle bus operated successfully on DME blends from 10-25 vol% on the shuttle bus loop until September 30, 2002. During the period of operation on the campus loop, the bus was pulled from service, operated at the PTI test track and real-time emissions measurements were obtained using an on-board emissions analyzer from Clean Air Technologies International, Inc. Particulate emissions reductions of 60% and 80% were observed at DME blend ratios of 12 vol.% and 25 vol.%, respectively, as the bus was operated over the Orange County driving cycle. Increases in NOx, CO and HC emissions were observed, however. In summary, the conversion of the shuttle bus was successfully accomplished, particulate emissions reductions were observed, but there were operational challenges in the field. Nonetheless, they were able to demonstrate reliable operation of the shuttle bus on DME-diesel blends.

  16. The Myth of the "Ideal Bus"

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ Does as an ideal bus technology exist? Many companies have and will promote a single technology as the ideal bus that will meet all application needs, but in actuality, each bus technology has its own strengths and weaknesses and thus is appropriate for different applications. History has shown the folly of claiming an ideal bus for every application.

  17. High-Speed Ring Bus

    Science.gov (United States)

    Wysocky, Terry; Kopf, Edward, Jr.; Katanyoutananti, Sunant; Steiner, Carl; Balian, Harry

    2010-01-01

    The high-speed ring bus at the Jet Propulsion Laboratory (JPL) allows for future growth trends in spacecraft seen with future scientific missions. This innovation constitutes an enhancement of the 1393 bus as documented in the Institute of Electrical and Electronics Engineers (IEEE) 1393-1999 standard for a spaceborne fiber-optic data bus. It allows for high-bandwidth and time synchronization of all nodes on the ring. The JPL ring bus allows for interconnection of active units with autonomous operation and increased fault handling at high bandwidths. It minimizes the flight software interface with an intelligent physical layer design that has few states to manage as well as simplified testability. The design will soon be documented in the AS-1393 standard (Serial Hi-Rel Ring Network for Aerospace Applications). The framework is designed for "Class A" spacecraft operation and provides redundant data paths. It is based on "fault containment regions" and "redundant functional regions (RFR)" and has a method for allocating cables that completely supports the redundancy in spacecraft design, allowing for a complete RFR to fail. This design reduces the mass of the bus by incorporating both the Control Unit and the Data Unit in the same hardware. The standard uses ATM (asynchronous transfer mode) packets, standardized by ITU-T, ANSI, ETSI, and the ATM Forum. The IEEE-1393 standard uses the UNI form of the packet and provides no protection for the data portion of the cell. The JPL design adds optional formatting to this data portion. This design extends fault protection beyond that of the interconnect. This includes adding protection to the data portion that is contained within the Bus Interface Units (BIUs) and by adding to the signal interface between the Data Host and the JPL 1393 Ring Bus. Data transfer on the ring bus does not involve a master or initiator. Following bus protocol, any BIU may transmit data on the ring whenever it has data received from its host. There

  18. 基于混杂Petri网的共直流母线交流传动系统建模与节能控制%Modeling and energy saving control for common DC bus AC drive system based on hybrid Petri nets

    Institute of Scientific and Technical Information of China (English)

    李继方; 汤天浩; 姚刚

    2011-01-01

    通过引入混杂系统理论,在分析系统运行过程的基础上,建立了共直流母线交流传动系统混杂Petri网模型和电机功率模型.在此基础上提出了一种基于配对理论的节能控制算法,即在电机状态可调控时段,通过改变随机运行状态,使耗能状态激发与回馈状态激发模糊配对的电机状态调控算法.采用该方法的直流母线功率仿真结果表明,该方法能有效地调整控制电机状态,使处在耗能状态电机最大限度地吸收制动状态电机再生的电能,减小了直流母线功率波动,提高了系统性能.%This paper introduces the hybrid system theory and establishes a common DC bus AC drive system hybrid Petri nets model and a motor power model based on the analysis of the system operation process. On this basis an energy saving control algorithm based on matching theory is proposed, namely the motor state adjusting algorithm which gets fuzzy pair of energy consumption state excitation and feedback state excitation through changing the random operation state in the controllable period of motor state. The results of simulation on DC bus power adopting this method show that it can effectively adjust and control the motor state, make the motor in energy consumption state absorb the electrical energy regenerated by motor in braking mode to a large extent,thus can reduce the DC bus power fluctuation and improve the system performance.This work is supported by National Natural Science Foundation of China (No. 51007056).

  19. Hybrid fuel cell bus demonstration: advanced technology moves bus forward

    International Nuclear Information System (INIS)

    The Province of Manitoba has been actively pursuing hydrogen since 2001 as one part of a portfolio of renewable energy alternatives. Six priority hydrogen actions have been underway covering a variety of opportunities, including two recently completed major transit bus and refueling demonstrations. A brief overview of Manitoba's activities on hydrogen will be provided, emphasizing the lessons learned from recent projects such as the hydrogen Hybrid Fuel Cell Bus demonstration, and in particular implications for the research community. (author)

  20. BUS 402 UOP Course Tutorial/ Tutorialrank

    OpenAIRE

    jonh

    2015-01-01

    For more course tutorials visit www.tutorialrank.com Tutorial Purchased: 4 Times, Rating: A+   ASHFORD BUS 402 Week 1 DQ 1 Environmental Changes ASHFORD BUS 402 Week 1 DQ 2 Vision and Mission ASHFORD BUS 402 Week 2 DQ 1 Components of External Environment ASHFORD BUS 402 Week 2 DQ 2 Components of Internal Analysis ASHFORD BUS 402 Week 2 Assignment Starbucks S.W.O.T. Analysis ASHFORD BUS 402 Week 3 DQ 1 Market Positioning Strategies ASHFORD BUS 402 W...

  1. BUS 501 Str course tutorial / uophelp

    OpenAIRE

    uophel

    2015-01-01

    For more course tutorials visit www.uophelp.com     BUS 501 Week 3 Assignment 1 The Independent Government Cost Estimate and the Statement of Work (Str Course) BUS 501 Week 4 Assignment 2 Types of Contracts and Performance-Based Acquisition (Str Course) BUS 501 Week 7 Assignment 3 Small Business Program and Source Selection Plans (Str Course) BUS 501 Assignment 4 Technical and Cost or Price Evaluations and Price Reasonableness (Str Course) BUS 501 Wee...

  2. BUS 599 Str course tutorial / uophelp

    OpenAIRE

    uophelp

    2015-01-01

    For more course tutorials visit www.uophelp.com   BUS 599 Week 1 Assignment Crafting and Executing Strategy Case JetBlue Airways BUS 599 Assignment #2 Competitive Forces and SWOT Analysis # Case Whole Foods Market BUS 599 Week 3 Assignment Foreign Market Entry and Diversification Case Corona Beer BUS 599 Week 4 Assignment HRM Issues Diversification Strategies Case Nucor Corporation BUS 599 Week 5 Assignment Corporate Culture Leadership Actions for Strategy Imp...

  3. SCHOOL BUS GARAGES, 1966 REVISION.

    Science.gov (United States)

    JOHNSON, HERBERT F.

    STANDARDS AND RECOMMENDATIONS ARE GIVEN FOR THE DESIGN AND CONSTRUCTION OF SCHOOL BUS GARAGES INCLUDING BRIEF DISCUSSIONS OF--(1) SITE DEVELOPMENT, (2) DESIGN AND CONSTRUCTION, AND (3) MECHANICAL (HEATING, PLUMBING, AND VENTILATION) AND ELECTRICAL FACTORS. (JT)

  4. Hydrogen Bus Technology Validation Program

    OpenAIRE

    Burke, Andy; McCaffrey, Zach; Miller, Marshall; Collier, Kirk; Mulligan, Neal

    2005-01-01

    Heavy duty engines are substantial contributors to NOX and PM emissions inventories in urban areas, and stringent emissions standards have been adopted as a consequence. CARB has passed very strict emissions standards for heavy duty engines beginning in 2007. Meeting these standards, especially for NOX emissions, may be difficult for conventional transit bus technologies. The purpose of the Hydrogen Bus Technology Evaluation Program was to develop and evaluate hydrogen enriched natural gas (H...

  5. Bus Stop - Environment Connection: Do Characteristics of the Built Environment Correlate with Bus Stop Crime?

    OpenAIRE

    Robin S Liggett; Loukaitou-Sideris, Anastasia; Iseki, Hiroyuki

    2003-01-01

    Can we understand why some bus stops are safe and others are crime-ridden? Can we predict which features of the bus stop environment are likely to encourage or discourage crime? Can we design safer bus stops? These questions are addressed by exploring the relationship between environmental variables and bus stop crime. An earlier study used crime data, along with environmental indicators, for a sample of 60 bus stops in downtown Los Angeles. Crime rates were higher for bus stops near alleys, ...

  6. Connecticut Transit (CTTRANSIT) Fuel Cell Transit Bus: Third Evaluation Report and Appendices

    Energy Technology Data Exchange (ETDEWEB)

    Chandler, K.; Eudy, L.

    2010-01-01

    This report describes operations at Connecticut Transit (CTTRANSIT) in Hartford for one prototype fuel cell bus and three new diesel buses operating from the same location. The prototype fuel cell bus was manufactured by Van Hool and ISE Corp. and features an electric hybrid drive system with a UTC Power PureMotion 120 Fuel Cell Power System and ZEBRA batteries for energy storage. The fuel cell bus started operation in April 2007, and evaluation results through October 2009 are provided in this report.

  7. Wishbone bus Architecture - A Survey and Comparison

    CERN Document Server

    Sharma, Mohandeep; 10.5121/vlsic.2012.3210

    2012-01-01

    The performance of an on-chip interconnection architecture used for communication between IP cores depends on the efficiency of its bus architecture. Any bus architecture having advantages of faster bus clock speed, extra data transfer cycle, improved bus width and throughput is highly desirable for a low cost, reduced time-to-market and efficient System-on-Chip (SoC). This paper presents a survey of WISHBONE bus architecture and its comparison with three other on-chip bus architectures viz. Advanced Micro controller Bus Architecture (AMBA) by ARM, CoreConnect by IBM and Avalon by Altera. The WISHBONE Bus Architecture by Silicore Corporation appears to be gaining an upper edge over the other three bus architecture types because of its special performance parameters like the use of flexible arbitration scheme and additional data transfer cycle (Read-Modify-Write cycle). Moreover, its IP Cores are available free for use requiring neither any registration nor any agreement or license.

  8. Factors associated with self-reported driver sleepiness and incidents in city bus drivers.

    Science.gov (United States)

    Anund, Anna; Ihlström, Jonas; Fors, Carina; Kecklund, Göran; Filtness, Ashleigh

    2016-08-01

    Driver fatigue has received increased attention during recent years and is now considered to be a major contributor to approximately 15-30% of all crashes. However, little is known about fatigue in city bus drivers. It is hypothesized that city bus drivers suffer from sleepiness, which is due to a combination of working conditions, lack of health and reduced sleep quantity and quality. The overall aim with the current study is to investigate if severe driver sleepiness, as indicated by subjective reports of having to fight sleep while driving, is a problem for city based bus drivers in Sweden and if so, to identify the determinants related to working conditions, health and sleep which contribute towards this. The results indicate that driver sleepiness is a problem for city bus drivers, with 19% having to fight to stay awake while driving the bus 2-3 times each week or more and nearly half experiencing this at least 2-4 times per month. In conclusion, severe sleepiness, as indicated by having to fight sleep during driving, was common among the city bus drivers. Severe sleepiness correlated with fatigue related safety risks, such as near crashes. PMID:27098307

  9. BUS 210 UOP Course Tutorial/ Tutorialrank

    OpenAIRE

    john

    2015-01-01

                      For more course tutorials visit www.tutorialrank.com Tutorial Purchased: 6 Times, Rating: A+   BUS 210 Week 1 DQ1 and DQ2 (UOP Course) BUS 210 Week 1 Checkpoint Business Models and Systems (UOP Course) BUS 210 Week 2 CheckPoint Business Organization (UOP Course) BUS 210 Week 2 Assignment Evolution of Business Presentation (UOP Course) BUS 210 Week 3 DQ 1 and DQ 2 (UOP Course) BUS 210 W...

  10. Aids to School Bus Design

    Science.gov (United States)

    1991-01-01

    Navistar International Transportation Corporation, Chicago, IL, used three separate NASA-developed technologies in the design and testing of their 3000 Series Bus Chassis which was developed expressly for school bus applications. For structural analysis, they used the MSC/NASTRAN program which mathematically analyzes a design and predicts how it will hold up under stress. They also used the SPATE 9000 system for non-contact measurement of stress, load transfer mechanisms, detection of hidden flaws, and monitoring structural changes during fatigue testing. SPATE 9000 was based on infrared stress measurement technology developed by Langley Research Center. They also employed the Wyle Ride Quality Meter, which was developed by Langley to aid in passenger aircraft design by providing an accurate measurement of ride vibration and sound level. These numbers translate into a subjective discomfort level index. These technologies contribute to the company's 45-48 percent share of the school bus chassis market.

  11. Power management, modern power electronics, sensorless propulsion, intelligent bus systems. 2. rev. ed.; Power Management. Moderne Leistungselektronik, Sensorlose Antriebstechnik, Intelligente Bussysteme

    Energy Technology Data Exchange (ETDEWEB)

    Hofer, Klaus

    2012-07-01

    The author of the book under consideration reports on modern power electronics, intelligent sensorless drive technology and bus systems. In the individual chapter, the author deals with the following aspects: Electrical power management, power semiconductors and power converter circuits; power converter circuits without commutation; line-commutated power converter circuits; self-commutated converter circuits; electro-mechanical drive systems; position-speed-torque control; sensorless and redundant drives with observers; intelligent bus systems.

  12. School bus and children's traffic safety

    Institute of Scientific and Technical Information of China (English)

    PAN Shu-ming; Stephen Hargarten; ZHU Shan-kuan

    2007-01-01

    There is no safer way to transport a child than a school bus. Fatal crashes involving occupants are extremely rare events in the US. In recent years, school bus transportation began to develop in China. We want to bring advanced experience on school bus safety in Western countries such as the US to developing countries.Methods: We searched the papers related to school bus safety from Medline, Chinese Scientific Journals Database and the Web of the National Highway Traffic Safety Administration (NHTSA).Results: There were only 9 papers related to school bus safety, which showed that higher levels of safety standards on school buses, school bus-related transportation and environmental laws and injury prevention were the primary reasons for the desired outcome. Few school bus is related to deaths and injuries in the developed countries.Conclusions: The developing countries should make strict environmental laws and standards on school bus safety to prevent children's injury and death.

  13. COMPARISON OF PARALLEL AND SERIES HYBRID POWERTRAINS FOR TRANSIT BUS APPLICATION

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Zhiming [ORNL; Daw, C Stuart [ORNL; Smith, David E [ORNL; Jones, Perry T [ORNL; LaClair, Tim J [ORNL; Parks, II, James E [ORNL

    2016-01-01

    The fuel economy and emissions of both conventional and hybrid buses equipped with emissions aftertreatment were evaluated via computational simulation for six representative city bus drive cycles. Both series and parallel configurations for the hybrid case were studied. The simulation results indicate that series hybrid buses have the greatest overall advantage in fuel economy. The series and parallel hybrid buses were predicted to produce similar CO and HC tailpipe emissions but were also predicted to have reduced NOx tailpipe emissions compared to the conventional bus in higher speed cycles. For the New York bus cycle (NYBC), which has the lowest average speed among the cycles evaluated, the series bus tailpipe emissions were somewhat higher than they were for the conventional bus, while the parallel hybrid bus had significantly lower tailpipe emissions. All three bus powertrains were found to require periodic active DPF regeneration to maintain PM control. Plug-in operation of series hybrid buses appears to offer significant fuel economy benefits and is easily employed due to the relatively large battery capacity that is typical of the series hybrid configuration.

  14. HERMES travels by CAN bus

    Science.gov (United States)

    Waller, Lewis G.; Shortridge, Keith; Farrell, Tony J.; Vuong, Minh; Muller, Rolf; Sheinis, Andrew I.

    2014-07-01

    The new HERMES spectrograph represents the first foray by AAO into the use of commercial off-the-shelf industrial field bus technology for instrument control, and we regard the final system, with its relatively simple wiring requirements, as a great success. However, both software and hardware teams had to work together to solve a number of problems integrating the chosen CANopen/CAN bus system into our normal observing systems. A Linux system running in an industrial PC chassis ran the HERMES control software, using a PCI CAN bus interface connected to a number of distributed CANopen/CAN bus I/O devices and servo amplifiers. In the main, the servo amplifiers performed impressively, although some experimentation with homing algorithms was required, and we hit a significant hurdle when we discovered that we needed to disable some of the encoders used during observations; we learned a lot about how servo amplifiers respond when their encoders are turned off, and about how encoders react to losing power. The software was based around a commercial CANopen library from Copley Controls. Early worries about how this heavily multithreaded library would work with our standard data acquisition system led to the development of a very low-level CANopen software simulator to verify the design. This also enabled the software group to develop and test almost all the control software well in advance of the construction of the hardware. In the end, the instrument went from initial installation at the telescope to successful commissioning remarkably smoothly.

  15. Low-inductance bus lines

    Science.gov (United States)

    Kernick, A.

    1977-01-01

    Laminated bus strips and bifilar litz cable connectors for high-power rectifiers, thrisistors, and transistors provide low inductance and eliminate electromagnetic interference in high-power circuits. These techniques offer significant cost advantages because of ease of assembly and consistent high quality of product. Effectiveness makes general usage in static power conversion likely.

  16. Pybus -- A Python Software Bus

    Energy Technology Data Exchange (ETDEWEB)

    Lavrijsen, Wim T.L.P.

    2004-10-14

    A software bus, just like its hardware equivalent, allows for the discovery, installation, configuration, loading, unloading, and run-time replacement of software components, as well as channeling of inter-component communication. Python, a popular open-source programming language, encourages a modular design on software written in it, but it offers little or no component functionality. However, the language and its interpreter provide sufficient hooks to implement a thin, integral layer of component support. This functionality can be presented to the developer in the form of a module, making it very easy to use. This paper describes a Pythonmodule, PyBus, with which the concept of a ''software bus'' can be realized in Python. It demonstrates, within the context of the ATLAS software framework Athena, how PyBus can be used for the installation and (run-time) configuration of software, not necessarily Python modules, from a Python application in a way that is transparent to the end-user.

  17. Pybus - A Python Software Bus

    International Nuclear Information System (INIS)

    A software bus, just like its hardware equivalent, allows for the discovery, installation, configuration, loading, unloading, and run-time replacement of software components, as well as channeling of inter-component communication. Python, a popular open-source programming language, encourages a modular design on software written in it, but it offers little or no component functionality. However, the language and its interpreter provide sufficient hooks to implement a thin, integral layer of component support. This functionality can be presented to the developer in the form of a module, making it very easy to use. This paper describes a Pythonmodule, PyBus, with which the concept of a ''software bus'' can be realized in Python. It demonstrates, within the context of the ATLAS software framework Athena, how PyBus can be used for the installation and (run-time) configuration of software, not necessarily Python modules, from a Python application in a way that is transparent to the end-user

  18. Analysis of robustness of urban bus network

    Science.gov (United States)

    Tao, Ren; Yi-Fan, Wang; Miao-Miao, Liu; Yan-Jie, Xu

    2016-02-01

    In this paper, the invulnerability and cascade failures are discussed for the urban bus network. Firstly, three static models(bus stop network, bus transfer network, and bus line network) are used to analyse the structure and invulnerability of urban bus network in order to understand the features of bus network comprehensively. Secondly, a new way is proposed to study the invulnerability of urban bus network by modelling two layered networks, i.e., the bus stop-line network and the bus line-transfer network and then the interactions between different models are analysed. Finally, by modelling a new layered network which can reflect the dynamic passenger flows, the cascade failures are discussed. Then a new load redistribution method is proposed to study the robustness of dynamic traffic. In this paper, the bus network of Shenyang City which is one of the biggest cities in China, is taken as a simulation example. In addition, some suggestions are given to improve the urban bus network and provide emergency strategies when traffic congestion occurs according to the numerical simulation results. Project supported by the National Natural Science Foundation of China (Grant Nos. 61473073, 61374178, 61104074, and 61203329), the Fundamental Research Funds for the Central Universities (Grant Nos. N130417006, L1517004), and the Program for Liaoning Excellent Talents in University (Grant No. LJQ2014028).

  19. Electrical system architecture having high voltage bus

    Science.gov (United States)

    Hoff, Brian Douglas; Akasam, Sivaprasad

    2011-03-22

    An electrical system architecture is disclosed. The architecture has a power source configured to generate a first power, and a first bus configured to receive the first power from the power source. The architecture also has a converter configured to receive the first power from the first bus and convert the first power to a second power, wherein a voltage of the second power is greater than a voltage of the first power, and a second bus configured to receive the second power from the converter. The architecture further has a power storage device configured to receive the second power from the second bus and deliver the second power to the second bus, a propulsion motor configured to receive the second power from the second bus, and an accessory motor configured to receive the second power from the second bus.

  20. Bus Vent Design Evolution for the Solar Dynamics Observatory

    Science.gov (United States)

    Woronowicz, Michael

    2010-01-01

    As a spacecraft undergoes ascent in a launch vehicle, its pressure environment transitions from one atmosphere to high vacuum in a matter of minutes. Venting of internal cavities is necessary to prevent the buildup of pressure differentials across cavity walls. Opposing the need to vent these volumes freely into space are thermal, optical, and electrostatic requirements for limiting or prohibiting the intrusion of unwanted energy into the same cavities. Bus vent design evolution is discussed for the Solar Dynamics Observatory. Design changes were influenced by a number of factors and concerns, such as contamination control, electrostatic discharge, changes in bus material, and driving fairing ascent pressure for a launch vehicle that was just entering service as this satellite project had gotten underway.

  1. BUS 620 ASHFORD Course Tutorial/TutorialRank

    OpenAIRE

    atwater

    2015-01-01

    For more course tutorials visit www.tutorialrank.com Tutorial Purchased: 4 Times, Rating: A   ASHFORD BUS 620 Week 1 DQ 1 What is Marketing   ASHFORD BUS 620 Week 1 DQ 2 Marketing Strategies   ASHFORD BUS 620 Week 1 Assignment Tesco Case   ASHFORD BUS 620 Week 2 DQ 1 Buyer Behavior   ASHFORD BUS 620 Week 2 DQ 2 Customer Needs   ASHFORD BUS 620 Week 2 Industry Forecasting   ASHFORD BUS 620 Week 3...

  2. BUS 660 ASHFORD Course Tutorial/TutorialRank

    OpenAIRE

    john

    2015-01-01

    For more course tutorials visit www.tutorialrank.com Tutorial Purchased: 4 Times, Rating: A+   BUS 660 Week 1 Assignment Developing Leaders at UPS  BUS 660 Week 2 Assignment Leadership Style  BUS 660 Week 3 Assignment Leadership Traits  BUS 660 Week 4 Assignment Leadership Skills  BUS 660 Week 5 Assignment Big Changes for a Small Hospital  BUS 660 Week 6 Assignment Research Paper BUS 660 Week 1 DQ 1Leadership Defined BU...

  3. PinBus Interface Design

    Energy Technology Data Exchange (ETDEWEB)

    Hammerstrom, Donald J.; Adgerson, Jewel D.; Sastry, Chellury; Pratt, Richard M.; Pratt, Robert G.

    2009-12-30

    On behalf of the U.S. Department of Energy, PNNL has explored and expanded upon a simple control interface that might have merit for the inexpensive communication of smart grid operational objectives (demand response, for example) to small electric end-use devices and appliances. The approach relies on bi-directional communication via the electrical voltage states of from one to eight shared interconnection pins. The name PinBus has been suggested and adopted for the proposed interface protocol. The protocol is defined through the presentation of state diagrams and the pins’ functional definitions. Both simulations and laboratory demonstrations are being conducted to demonstrate the elegance and power of the suggested approach. PinBus supports a very high degree of interoperability across its interfaces, allowing innumerable pairings of devices and communication protocols and supporting the practice of practically any smart grid use case.

  4. New TPG bus route 28

    CERN Multimedia

    2003-01-01

    Geneva's Public Transport services (TPG) have recently inaugurated a new bus line 28, connecting the La Tour Hospital in Meyrin to the international organisations in Geneva, via the airport. All signs associated with this route will be yellow in colour. Timetables and route details can be found at http://www.tpg.ch. Relations with the Host States Service http://www.cern.ch/relations/ Tel. 72848

  5. Urinary 1-hydroxypyrene and mutagenicity in bus drivers and mail carriers exposed to urban air pollution in Denmark

    DEFF Research Database (Denmark)

    Hansen, A.M.; Wallin, H.; Binderup, Mona-Lise;

    2004-01-01

    Background: Previous studies in Denmark have shown that bus drivers and tramway employees were at an increased risk for developing several types of cancer and that bus drives from central Copenhagen have high levels of biomarkers of DNA damage. Aims: The present study evaluates 1-hydroxypyrene...... NAT2 phenotype, cooking at home, exposure to vehicle exhaust, and performing physical exercise after work were included. The NAT2 slow acetylators had 29% (1.29 [CI: 1.15-1.98]) higher 1-hydroxypyrene concentrations in urine than the fast acetylators. Male bus drivers had 0.92 revertants...

  6. Urinary 1-hydroxypyrene and mutagenicity in bus drivers and mail carriers exposed to urban air pollution in Denmark

    DEFF Research Database (Denmark)

    Hansen, Åse Marie; Wallin, Håkan; Binderup, Mona Lise;

    2004-01-01

    BACKGROUND: Previous studies in Denmark have shown that bus drivers and tramway employees were at an increased risk for developing several types of cancer and that bus drives from central Copenhagen have high levels of biomarkers of DNA damage.AIMS: The present study evaluates 1-hydroxypyrene...... NAT2 phenotype, cooking at home, exposure to vehicle exhaust, and performing physical exercise after work were included. The NAT2 slow acetylators had 29% (1.29 [CI: 1.15-1.98]) higher 1-hydroxypyrene concentrations in urine than the fast acetylators. Male bus drivers had 0.92 revertants...

  7. Bus Routes, Marta Bus Routes located in Transportation database, Published in unknown, City of Roswell, GA.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Bus Routes dataset as of unknown. It is described as 'Marta Bus Routes located in Transportation database'. Data by this publisher are often provided in State...

  8. Economical launching and accelerating control strategy for a single-shaft parallel hybrid electric bus

    Science.gov (United States)

    Yang, Chao; Song, Jian; Li, Liang; Li, Shengbo; Cao, Dongpu

    2016-08-01

    This paper presents an economical launching and accelerating mode, including four ordered phases: pure electrical driving, clutch engagement and engine start-up, engine active charging, and engine driving, which can be fit for the alternating conditions and improve the fuel economy of hybrid electric bus (HEB) during typical city-bus driving scenarios. By utilizing the fast response feature of electric motor (EM), an adaptive controller for EM is designed to realize the power demand during the pure electrical driving mode, the engine starting mode and the engine active charging mode. Concurrently, the smoothness issue induced by the sequential mode transitions is solved with a coordinated control logic for engine, EM and clutch. Simulation and experimental results show that the proposed launching and accelerating mode and its control methods are effective in improving the fuel economy and ensure the drivability during the fast transition between the operation modes of HEB.

  9. YUTONG BUS: Grateful To The Financial Crisis

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Shenyin&Wanguo Securities issued an announcement on Jan 9 rating Yutong Bus(600066)as"buying",on the basis that the bus maker's gross profits went better in the last quarter of 2008 and to be further improved in the first quarter of 2009,with an increased market share. The report drew attention inside the in- dustry when the entire bus segment was suffering a tough time.

  10. Wishbone Bus Architecture - A Survey and Comparison

    Directory of Open Access Journals (Sweden)

    Mohandeep Sharma

    2012-05-01

    Full Text Available The performance of an on-chip interconnection architecture used for communication between IP cores depends on the efficiency of its bus architecture. Any bus architecture having advantages of faster bus clock speed, extra data transfer cycle, improved bus width and throughput is highly desirable for a low cost, reduced time-to-market and efficient System-on-Chip (SoC. This paper presents a survey of WISHBONE bus architecture and its comparison with three other on-chip bus architectures viz. Advanced Microcontroller Bus Architecture (AMBA by ARM, CoreConnect by IBM and Avalon by Altera. The WISHBONE Bus Architecture by Silicore Corporation appears to be gaining an upper edge over the other three bus architecture types because of its special performance parameters like the use of flexible arbitration scheme and additional data transfer cycle (Read-Modify-Write cycle. Moreover, its IP Cores are available free for use requiring neither any registration nor any agreement or license.

  11. Ecodriving for Reduction of Bus Transit Emission with Vehicle’s Hybrid Dynamic Model

    Directory of Open Access Journals (Sweden)

    Xiuzheng Zheng

    2015-01-01

    Full Text Available This paper formulates a global ecodriving optimal control to advise the green driving speed for bus transit to minimize the exhaust emission using Vehicle-to-Infrastructure (V2I communication. Assuming communication between vehicles and infrastructure (V2I and knowledge of traffic signal timings and waiting passengers at stations are known, an optimal driving speed is proposed to minimize the total vehicle emissions of the bus route. The dwell time of the bus transit at each station which includes two parts is proposed. A traffic lights timing model is employed as constraints to control the formation of the green wave band. Vehicle specific power (VSP model is further applied to evaluate the exhaust emission level linked with the speed and acceleration of the bus transit. An approximate sixteen-kilometer traffic network including fourteen intersections and fifteen stations of Beijing bus transit line 1 in Chaoyang District, Beijing, is chosen to investigate the performance of the developed ecodriving approach.

  12. Single bus star connected reluctance drive and method

    Energy Technology Data Exchange (ETDEWEB)

    Fahimi, Babak; Shamsi, Pourya

    2016-05-10

    A system and methods for operating a switched reluctance machine includes a controller, an inverter connected to the controller and to the switched reluctance machine, a hysteresis control connected to the controller and to the inverter, a set of sensors connected to the switched reluctance machine and to the controller, the switched reluctance machine further including a set of phases the controller further comprising a processor and a memory connected to the processor, wherein the processor programmed to execute a control process and a generation process.

  13. A Rule-Based Energy Management Strategy for a Plug-in Hybrid School Bus Based on a Controller Area Network Bus

    Directory of Open Access Journals (Sweden)

    Jiankun Peng

    2015-06-01

    Full Text Available This paper presents a rule-based energy management strategy for a plug-in hybrid school bus (PHSB. In order to verify the effectiveness and rationality of the proposed energy management strategy, the powertrain and control models were built with MATLAB/Simulink. The PHSB powertrain model includes an engine model, ISG (integrated started and generator model, drive motor model, power battery packs model, driver model, and vehicle longitudinal dynamics model. To evaluate the controller area network (CAN bus performance features such as the bus load, signal hysteresis, and to verify the reliability and real-time performance of the CAN bus multi-node control method, a co-simulation platform was built with CANoe and MATLAB/Simulink. The co-simulation results show that the control strategy can meet the requirements of the PHSB’s dynamic performance. Meanwhile, the charge-depleting mode (CD and charge-sustaining mode (CS can switch between each other and maintain a state-of-charge (SoC of around 30%, indicating that the energy management strategy effectively extends the working period of the CD mode and improves the fuel economy further. The energy consumption per 100 km includes 13.7 L diesel and 10.5 kW·h electricity with an initial SoC of 75%. The CANoe simulation results show that the bus communication performs well without error frames.

  14. City of Chula Vista hydrogen fuel cell bus demonstration project

    Energy Technology Data Exchange (ETDEWEB)

    Gustafson, B.; Bamberger, B.

    1996-10-01

    Hydrogen as an energy carrier and fuel has potential for various uses including electricity, commercial, residential, transportation, and industrial. It is an energy carrier that can be produced from a variety of primary sources and potentially can accomplish these various uses while significantly reducing pollution by substituting for or reducing the use of fossil fuels. One of the most immediate and potentially viable roles for hydrogen as an energy carrier will be its use as a transportation fuel, especially in densely populated urban areas where automotive emissions contribute significantly to air pollution. The Department of Energy`s commitment to research and development of hydrogen as an alternative fuel, and California`s Zero Emission Vehicle (ZEV) requirements, both provide the impetus and favorable circumstance for demonstrating hydrogen as a transportation fuel on an urban bus system. The purpose of this project is to demonstrate the feasibility of using solid polymer fuel cells in a hydrogen-powered electric drive system for an urban transit bus application. Fuel cell buses use hydrogen fuel and oxygen from the air to produce electrical power with the only byproduct being pure water. Proton Exchange Membrane (PEM) fuel cells are proposed for this project. Current evidence suggests that fuel cells, which rely on hydrogen and a process known as proton exchange to generate their power, appear to have an infinite life span. All exhaust pollution is completely eliminated, resulting in a Zero Emission Vehicle (ZEV). An urban bus system offers the potential for developing a market for the production of hydrogen propulsion technology due to extensive vehicular use in densely populated areas experiencing pollution from numerous sources, and because the central garaging facilities or the bus system facilitates fueling and maintenance functions.

  15. A new bus lane on urban expressway with no-bay bus stop

    Science.gov (United States)

    Tian, Zhao; Jia, Limin

    2016-01-01

    The sharp increase in residents and vehicles causes heavy traffic pressure in many cities. To ease traffic congestion, it has been the common sense that we should develop public transit system. The priority of the bus appears particularly necessary with the rapid development of the public transport system. The bus lane is an important embodiment of the bus priority. Focusing on the problem of the unreasonable dedicated bus lane (DBL) under the lower ratio of buses, this paper proposed a new bus lane with limited physical length. And this bus lane can reduce the lane-changing conflict caused by the buses and cars running on roads without bus lanes. Based on the cellular automata (CA) traffic flow model and the lane-changing behavior of the vehicle including the optional lane-changing and the mandatory lane-changing, a three-lane traffic model with an isolated no-bay bus stop is proposed. The ordinary three-lane traffic without a bus lane and the cases of traffic with a DBL or the proposed bus lane are simulated, and the comparisons in the form of the fundamental diagrams are made among them. It is shown that the no-bay bus stop can act as a bottleneck on the traffic flow because of the mandatory lane-changing behavior. Under a certain ratio of the bus number to the total vehicles number, (1) the traffic with the proposed bus lane has less lane-changing conflict and can provide higher traffic capacity than the ordinary traffic without a bus lane, (2) compared with the DBL, the proposed bus lane is advantageous in easing congestion on the ordinary lanes when the traffic flow is high and can avoid unreasonable allocation of the road resources.

  16. Mastering NServiceBus and persistence

    CERN Document Server

    Helton, Rich

    2014-01-01

    This book is intended for developers, designers, and architects alike who wish to build C# NServiceBus enterprise architectures and learn how ESB persists data and messages to help them attain their goals. No prior knowledge of persistence in NServiceBus is required.

  17. Study on Ultracapacitors Parameter Design and Control Strategy of Electric Bus

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Based on the analysis of ultracapacitors efficiency and vehicle driving character, three conditions restricting the ultracapacitors charge/discharge time are derived. The study focuses on ultracapacitors specific design rules decided by charge/discharge time and how to integrate with battery packs and converter through ultracapacitors' voltage and current double regulators. Through BFC6100-EV electric bus test, it is shown that the proposed method and control strategy are feasible and the system can effectively improve the bus dynamic performance and ability to receive braking energy effectively.

  18. Steering Stability of a Bus Powered by Natural Gas While Braking

    Directory of Open Access Journals (Sweden)

    Ivan Ivković

    2011-03-01

    Full Text Available The use of natural gas as bus propellant presupposes the application of a driving unit adjusted to the use of natural gas in addition to the application of a corresponding gas facility. The first part of the paper describes the distinguishing features related to the storage of compressed natural gas tanks as the main carriers of additional mass due to the use of this energy substance for the propulsion of buses, as well as their effect on the structural features of vehicles. The second part of the paper covers the formulation and analysis of differential equations in terms of the steering system’s stability, and the equations depict the motion of the natural gas bus with its structural features, according to the defined models for instances of bus braking with locked front, rear and all wheels.

  19. A Rule-Based Energy Management Strategy for a Plug-in Hybrid School Bus Based on a Controller Area Network Bus

    OpenAIRE

    Jiankun Peng; Hao Fan; Hongwen He; Deng Pan

    2015-01-01

    This paper presents a rule-based energy management strategy for a plug-in hybrid school bus (PHSB). In order to verify the effectiveness and rationality of the proposed energy management strategy, the powertrain and control models were built with MATLAB/Simulink. The PHSB powertrain model includes an engine model, ISG (integrated started and generator) model, drive motor model, power battery packs model, driver model, and vehicle longitudinal dynamics model. To evaluate the controller area ne...

  20. High speed bus technology development

    Science.gov (United States)

    Modrow, Marlan B.; Hatfield, Donald W.

    1989-09-01

    The development and demonstration of the High Speed Data Bus system, a 50 Million bits per second (Mbps) local data network intended for avionics applications in advanced military aircraft is described. The Advanced System Avionics (ASA)/PAVE PILLAR program provided the avionics architecture concept and basic requirements. Designs for wire and fiber optic media were produced and hardware demonstrations were performed. An efficient, robust token-passing protocol was developed and partially demonstrated. The requirements specifications, the trade-offs made, and the resulting designs for both a coaxial wire media system and a fiber optics design are examined. Also, the development of a message-oriented media access protocol is described, from requirements definition through analysis, simulation and experimentation. Finally, the testing and demonstrations conducted on the breadboard and brassboard hardware is presented.

  1. Risk Factors for Near Miss Incident among Long Distance Bus Drivers in Malaysia

    Directory of Open Access Journals (Sweden)

    Nik Nor Ronaidi NIK MAHDI

    2015-10-01

    Full Text Available Background: Road traffic accident is a worldwide public health issue that has its highest impact on low and middle income countries including Malaysia. Many previous studies concerned on the causality of the actual accidents and little attention were given to near miss incidents. Hence, the current study was designed to determine the prevalence and associated factors for near miss incident among long distance bus drivers in Malaysia.Methods: A cross sectional study was conducted among 517 long distance bus drivers. Data were collected using interview-guided translated and validated Pittsburgh Sleep Quality Index and Manchester Driver Behaviour questionnaire. Multiple logistic regression analysis was performed to determine the significant factors for near miss incident among long distance bus drivers in Malaysia.Results: The prevalence of near miss incident among long distance bus drivers was 37.5% (95% CI: 33.5, 41.8. The significant associated factors for near miss incident were younger age group (ORadj : 1.99; 95% CI: 1.32, 3.01, longer distance travelled per day (ORadj : 2.34; 95% CI: 1.52, 3.60, sleep disturbances (ORadj : 1.74; 95% CI: 1.19, 2.54 and errors in driving behaviour (ORadj : 1.31; 95% CI: 1.23, 1.39.Conclusion: Self-reported near miss incidents were relatively high among long distance bus drivers in Malaysia. This issue should be taken seriously and preventive action should consider the significant human factors such as younger age group, errors in driving behaviours, sleep disturbances as well as occupational factors like distance travelled per day. Keywords: Road traffic accident, Near miss, Bus drivers, Malaysia 

  2. Radiation-Tolerant Dual Data Bus

    Science.gov (United States)

    Kinstler, Gary A.

    2007-01-01

    An architecture, and a method of utilizing the architecture, have been proposed to enable error-free operation of a data bus that includes, and is connected to, commercial off-the-shelf (COTS) circuits and components that are inherently susceptible to singleevent upsets [SEUs (bit flips caused by impinging high-energy particles and photons)]. The architecture and method are applicable, more specifically, to data-bus circuitry based on the Institute for Electrical and Electronics Engineers (IEEE) 1394b standard for a high-speed serial bus.

  3. BUS 1000母线保护的应用%Application of BUS 1000 Bus-Bar Protection

    Institute of Scientific and Technical Information of China (English)

    马晓光; 张贵金; 冷雪玉

    2001-01-01

    发电厂的母线是电厂中的一个重要组成元件,当母线上发生故障时,将使连接在故障母线上的所有元件在修复故障母线期间,或转换到另一组母线上运行以前遭到停电。同时还可能破坏系统稳定,造成严重后果。因此,母线保护装置是正确迅速切除母线故障的重要装置,它的拒动或误动将给电力系统带来严重危害。详细介绍了华能丹东发电厂350 MW发电机组采用的BUS 1000型母线保护的原理,并对其正常运行及区内、外故障、断路器失灵保护、母联断路器过流保护等几个方面作了详细分析。%Bus bar is an important component in e lectric power plant.When bus bar fault occurs,all components connected on the fa ulty bus bar will be in outage until power restores by repairing the faulty bus bar or switching them over to another bus bar.Furthermore,it may cause the destr uction of system stability resulting in serious consequence.Bus bar protection d evice is the very device to quickly remove bus bar faults,and its malfunctioning will bring serious harm to power system. The principle of BUS 1000 bus bar prot ection used for 350 MW unit of dandong power plant is introduced.Its normal oper ation and several aspects,such as in-and out-area faults,out-of-order breake r protection,bus bar breaker over-current protection,are analyzed in detail.

  4. Driving the Phileas, a new automated public transport vehicle

    NARCIS (Netherlands)

    de Waard, Dick; Brookhuis, Karel; Fabriek, Eva; Van Wolffelaar, Peter C.

    2004-01-01

    Phileas is a high quality public transport vehicle combining characteristics of bus, tram, and the underground. Phileas is equipped with pneumatic tyres and complies with the statutory regulations for buses. Accordingly Phileas may drive everywhere on public roads where buses are allowed to drive. O

  5. Incremental bus service design: combining limited-stop and local bus services

    OpenAIRE

    Chiraphadhanakul, Virot; Barnhart, Cynthia

    2013-01-01

    Long in-vehicle travel times resulting from frequent stops make bus service an unattractive choice for many commuters. Limited-stop bus services however have the advantage of shorter in-vehicle times experienced by passengers. In this work, we seek to modify a given bus service by optimally reassigning some number of bus trips, as opposed to providing additional trips, to operate a limited-stop service. We propose an optimization model to determine a limited-stop service route to be operated ...

  6. BUS 599 STRAYER Course Tutorial/TutorialRank

    OpenAIRE

    alfonos

    2015-01-01

    For more course tutorials visit www.tutorialrank.com Tutorial Purchased: 4 Times, Rating: A+ STRAYER BUS 599 Week 1 Assignment Crafting and Executing Strategy Case JetBlue Airways STRAYER BUS 599 Week 2 Assignment Competitive Forces and SWOT Analysis Case Whole Foods Market STRAYER BUS 599 Week 3 Assignment Foreign Market Entry and Diversification Case Corona Beer STRAYER BUS 599 Week 4 Assignment HRM Issues Diversification Strategies Case Nucor Corporation STRAYER BUS 5...

  7. The high speed bus technology development program

    Science.gov (United States)

    Ludvigson, M. T.; Modrow, M. B.; Goldman, P. C.

    The current development status of a high-speed data bus to link MIL-STD-1750A computers in avionics applications is reviewed and illustrated with diagrams and photographs. The bus requirements include data rate 50 Mb/s, a linear token-passing scheme permitting both electronic and fiber-optic implementation, up to 64-terminal capacity, maximum terminal separation 300 ft, latency control via token-rotation-timer priority, self-test and bus-loop test capability, and automatic clock synchronization. The design concept and performance of a breadboard wire bus tested in July 1986 are discussed in detail, with particular attention to the redundancy manager, the output controller, the input controller, the ringmaster topology manager, and typical initial-placement problems.

  8. DESIGN AND EXPERIMENT OF ELECTRIC BUS

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Performance and reliability experiments on BJD-6100EV electric buses, jointly developed by Beijing Institute of Technology and Beijing Public Transport Company, are introduced. Output power model of battery pack is established and maximum output power is analyzed. A permanent magnetic direct current (PMDC) motor with enhanced windings is developed for the bus. Torque-speed characteristics of the motor are modeled and performance of electric bus is analyzed. Computational method of the range of electric bus is proposed and discussed. Experiments show that electric bus can realize design requirements. Computational methods are verified with the help of field test. It is expected that design and computation method will provide helpful reference to development of electric vehicles.

  9. Reducing transit bus emissions: Alternative fuels or traffic operations?

    Science.gov (United States)

    Alam, Ahsan; Hatzopoulou, Marianne

    2014-06-01

    In this study, we simulated the operations and greenhouse gas (GHG) emissions of transit buses along a busy corridor and quantified the effects of two different fuels (conventional diesel and compressed natural gas) as well as a set of driving conditions on emissions. Results indicate that compressed natural gas (CNG) reduces GHG emissions by 8-12% compared to conventional diesel, this reduction could increase to 16% with high levels of traffic congestion. However, the benefits of switching from conventional diesel to CNG are less apparent when the road network is uncongested. We also investigated the effects of bus operations on emissions by applying several strategies such as transit signal priority (TSP), queue jumper lanes, and relocation of bus stops. Results show that in congested conditions, TSP alone can reduce GHG emissions by 14% and when combined with improved technology; a reduction of 23% is achieved. The reduction benefits are even more apparent when other transit operational improvements are combined with TSP. Finally a sensitivity analysis was performed to investigate the effect of operational improvements on emissions under varying levels of network congestion. We observe that under “extreme congestion”, the benefits of TSP decrease.

  10. Dynamic Bus Travel Time Prediction Models on Road with Multiple Bus Routes.

    Science.gov (United States)

    Bai, Cong; Peng, Zhong-Ren; Lu, Qing-Chang; Sun, Jian

    2015-01-01

    Accurate and real-time travel time information for buses can help passengers better plan their trips and minimize waiting times. A dynamic travel time prediction model for buses addressing the cases on road with multiple bus routes is proposed in this paper, based on support vector machines (SVMs) and Kalman filtering-based algorithm. In the proposed model, the well-trained SVM model predicts the baseline bus travel times from the historical bus trip data; the Kalman filtering-based dynamic algorithm can adjust bus travel times with the latest bus operation information and the estimated baseline travel times. The performance of the proposed dynamic model is validated with the real-world data on road with multiple bus routes in Shenzhen, China. The results show that the proposed dynamic model is feasible and applicable for bus travel time prediction and has the best prediction performance among all the five models proposed in the study in terms of prediction accuracy on road with multiple bus routes.

  11. Sexual Harassment on the School Bus: Supporting and Preparing Bus Drivers to Respond Appropriately

    Science.gov (United States)

    Allen, Melissa; Young, Ellie L.; Ashbaker, Betty Y.; Heaton, Emily; Parkinson, Marisa

    2003-01-01

    Sexual harassment is commonplace in schools, particularly among adolescents. Although information on this topic is typically gathered from students and teachers, this study collected information from school bus drivers. Based on feedback from 58 school bus drivers, 39 (67%) reported observing students making sexual comments or jokes. Almost half…

  12. Bullying and Aggression on the School Bus: School Bus Drivers' Observations and Suggestions

    Science.gov (United States)

    deLara, Ellen

    2008-01-01

    Every school day bus drivers are responsible for transporting children safely over many miles, yet they are rarely polled for their opinions or contributions to school safety. School bus drivers are in a unique position to inform the discussion on aggressive behavior during the school day. This exploratory study collected information from school…

  13. An Analysis of Transit Bus Driver Distraction Using Multinomial Logistic Regression Models

    OpenAIRE

    D'Souza, Kelwyn

    2012-01-01

    This paper explores the problem of distracted driving at a regional bus transit agency to identify the sources of distraction and provide an understanding of factors responsible for driver distraction. A risk range system was developed to classify the distracting activities into four risk zones. The high risk zone distracting activities were analyzed using multinomial logistic regression models to determine the impact of various factors on the multiple categorical levels of driver distraction...

  14. Designing Bus Structure for Digital Controller of Nuclear Power Plant

    International Nuclear Information System (INIS)

    In this paper, the bus structure design for the digital controller of Nuclear Power Plant (NPP) is proposed. The most important portion is the bus in the digital controller. A bus is responsible for transmission data among the various Input/Output (I/O) board, Processor board and Communication board. An existing bus is a parallel bus structure such as the VERSA Module Euro (VME) bus and an extended Static Random Access Memory (SRAM) Controller. Central Processing Unit (CPU) processing speed and communication speed is faster than before, but the parallel bus has a speed limit. Because it is the physically lines shared and the weakness about reflected wave. That is, use of the parallel bus has been the cause of the performance degradation of system. To solve the parallel bus problem, the bus has been developed by serial. The configuration of transceiver logic was simplified by not share the bus that all boards and processor boards was connected to the point-to-point. Serial bus was configured using physically Low Voltage Differential Signaling (LVDS). The speed limit of bus was broken by the LVDS what is consisted of a strong against the reflected-wave of signal, noise and etc. Each channel of bus has a different speed mode and is able to set a required transmission way. Different transmission ways of each channel are able to transmit data to match the required response time of system. The LVDS speed has about basically 1Gbps but the bus was composed with less than 50Mbps considering the environmental characteristics of nuclear. It was shown that the configuration of the serial bus was the performance and the reliability more improving than parallel bus

  15. Statistical Analysis of Bus Networks in India

    CERN Document Server

    Chatterjee, Atanu; Ramadurai, Gitakrishnan

    2015-01-01

    Through the past decade the field of network science has established itself as a common ground for the cross-fertilization of exciting inter-disciplinary studies which has motivated researchers to model almost every physical system as an interacting network consisting of nodes and links. Although public transport networks such as airline and railway networks have been extensively studied, the status of bus networks still remains in obscurity. In developing countries like India, where bus networks play an important role in day-to-day commutation, it is of significant interest to analyze its topological structure and answer some of the basic questions on its evolution, growth, robustness and resiliency. In this paper, we model the bus networks of major Indian cities as graphs in \\textit{L}-space, and evaluate their various statistical properties using concepts from network science. Our analysis reveals a wide spectrum of network topology with the common underlying feature of small-world property. We observe tha...

  16. High speed data bus design validation

    Science.gov (United States)

    Stevens, Rick

    The SAE Linear Implementation Task Group has developed the SAE Linear Token Passing Multiplex Data Bus Standard (AS4074.1) and is currently working on a validation plan. This validation plan will define the test requirements for determining that an implementation of the standard meets the requirements of SAE AS4074.1. Once completed, the test requirements contained in this plan will be executed on bus interface units (BIUs) for validation purposes. In the present work, the author describes the use of a validation model that incorporates many of the capabilities of the validation test plan. This model can also be thought of as a VHDL (VHSIC Hardware Description Language) behavioral representation of the SAE Linear Token Passing Multiplex Data Bus Standard. It is tightly coupled to the standard and provides a model that can be used during the BIU development to validate the design.

  17. Risk factors affecting fatal bus accident severity: Their impact on different types of bus drivers.

    Science.gov (United States)

    Feng, Shumin; Li, Zhenning; Ci, Yusheng; Zhang, Guohui

    2016-01-01

    While the bus is generally considered to be a relatively safe means of transportation, the property losses and casualties caused by bus accidents, especially fatal ones, are far from negligible. The reasons for a driver to incur fatalities are different in each case, and it is essential to discover the underlying risk factors of bus fatality severity for different types of drivers in order to improve bus safety. The current study investigates the underlying risk factors of fatal bus accident severity to different types of drivers in the U.S. by estimating an ordered logistic model. Data for the analysis are retrieved from the Buses Involved in Fatal Accidents (BIFA) database from the USA for the years 2006-2010. Accidents are divided into three levels by counting their equivalent fatalities, and the drivers are classified into three clusters by the K-means cluster analysis. The analysis shows that some risk factors have the same impact on different types of drivers, they are: (a) season; (b) day of week; (c) time period; (d) number of vehicles involved; (e) land use; (f) manner of collision; (g) speed limit; (h) snow or ice surface condition; (i) school bus; (j) bus type and seating capacity; (k) driver's age; (l) driver's gender; (m) risky behaviors; and (n) restraint system. Results also show that some risk factors only have impact on the "young and elder drivers with history of traffic violations", they are: (a) section type; (b) number of lanes per direction; (c) roadway profile; (d) wet road surface; and (e) cyclist-bus accident. Notably, history of traffic violations has different impact on different types of bus drivers. PMID:26513334

  18. Design of E-City Bus Tracking System

    Directory of Open Access Journals (Sweden)

    Shekhar Shinde

    2014-04-01

    Full Text Available E-city bus tracking system will serve as a viable notification system that will effectively assist passengers in making the decision of whether to wait for the bus or not. This system is a standalone system designed to display the real-time location(s of the buses with the use of GSM module technology. The system will consist of an IR transmitter module installed on the buses, receiver boards installed on the bus stops and GSM receiver connected with PC monitoring the whole arrangement. It will also have passenger information system software installed at the bus stops and which will provide user the relevant information regarding all the bus numbers going for his source to destination along with the route details. It will also transmit its bus numbers and route names, with the help of LED transmitter, continuously as soon as the bus comes within the range of the receiver at the bus stop.

  19. The Bus Station Spacing Optimization Based on Game Theory

    Directory of Open Access Journals (Sweden)

    Changjiang Zheng

    2015-01-01

    Full Text Available With the development of city, the problem of traffic is becoming more and more serious. Developing public transportation has become the key to solving this problem in all countries. Based on the existing public transit network, how to improve the bus operation efficiency, and reduce the residents transit trip cost has become a simple and effective way to develop the public transportation. Bus stop spacing is an important factor affecting passengers’ travel time. How to set up bus stop spacing has become the key to reducing passengers’ travel time. According to comprehensive traffic survey, theoretical analysis, and summary of urban public transport characteristics, this paper analyzes the impact of bus stop spacing on passenger in-bus time cost and out-bus time cost and establishes in-bus time and out-bus time model. Finally, the paper gets the balance best station spacing by introducing the game theory.

  20. Secure Bus-Ticketing System using NFC

    Directory of Open Access Journals (Sweden)

    Monalisa Lopes

    2015-04-01

    Full Text Available For making the day to day life more convenient for the passengers travelling in bus some technologies can be used like Near Field Communication (NFC, Radio Frequency Identification (RFID. The proposed system is based on ticketing and identification of passengers in public transport. The system suggest a user friendly automated ticketing system which will automatically deduct the passengers fare according to the distance travelled as well as detect the passengers detail information. The system also helps to calculate the total revenue of a single bus in a day. Another important aspect is reusability, which helps use ticket multiple times as it is rechargeable.

  1. NOC AND BUS ARCHITECTURE: A COMPARISON

    Directory of Open Access Journals (Sweden)

    RAJEEV KAMAL

    2012-04-01

    Full Text Available Network-on-chip designs promise to offer considerable advantages over the traditional bus-based architecture. As continuing scaling of Moore’s law enables ever greater transistor densities, design complexity, power limitations and application convergence networks have started to replace busses in much smaller systems and the enhancement of NoC. This paper summarizes the advantages of the NoC and the limitations of traditional bus based architecture. In this paper we discuss a detailed comparison of area, power, scalability andperformance of traditional busses in comparison with NoC.

  2. Bus drivers' exposure to bullying at work: an occupation-specific approach.

    Science.gov (United States)

    Glasø, Lars; Bele, Edvard; Nielsen, Morten Birkeland; Einarsen, Ståle

    2011-10-01

    The present study employs an occupation-specific approach to examine bus drivers' exposure to bullying and their trait anger, job engagement, job satisfaction and turnover intentions. A total of 1,023 bus drivers from a large public transport organization participated in the study. The findings show that bus driving can be a high risk occupation with regard to bullying, since 70% of the bus drivers had experienced one or more acts typical of bullying during the last six months. As many as 11% defined themselves as victims of bullying, 33% of whom (i.e. 3.6% of the total sample) see themselves as victims of frequent bullying. Colleagues were most frequently reported as perpetrators. Exposure to bullying was negatively related to job engagement and job satisfaction and positively related to turnover intentions. Job engagement and job satisfaction mediated the relationship between bullying and intention to leave, respectively. Trait anger had an interaction effect on the relationship between bullying and turnover intentions. This study indicates that workplace bullying has context-specific aspects that require increased use of context-specific policies and intervention methods. PMID:21605122

  3. Vulnerability of bus and truck drivers affected from vehicle engine noise

    Directory of Open Access Journals (Sweden)

    Naba Kumar Mondal

    2014-12-01

    Full Text Available The purpose of this study was to find out the vulnerability of bus and truck drivers due to constant exposure of vehicle-engine noise inside the vehicle cabin. Comparative results revealed that noise levels inside the cabin of buses and trucks were in the range of 88.6–102.4 dB and 87.95–103.4 dB, respectively. The health status of bus and truck drivers was assessed by measuring their systolic and diastolic pressure, pulse rate, BMI, digestion problem, hearing loss, vision problem, back pain and irritation. Paired t-test of the results revealed non-significant (p < 0.05 relation between systolic and diastolic pressure of both bus and truck drivers. The pulse rate of truck driver was significantly (p < 0.01 related with noise level inside the cabin of truck. The humidity level inside the cabin showed a positive relation with vehicle age (p < 0.01 and driving period (p < 0.01. This study clearly suggests that vehicle engine noise adversely affects the cardiovascular health of both bus and truck drivers.

  4. An Efficient Segmental Bus-Invert Coding Method for Instruction Memory Data Bus Switching Reduction

    Directory of Open Access Journals (Sweden)

    Gu Ji

    2009-01-01

    Full Text Available Abstract This paper presents a bus coding methodology for the instruction memory data bus switching reduction. Compared to the existing state-of-the-art multiway partial bus-invert (MPBI coding which relies on data bit correlation, our approach is very effective in reducing the switching activity of the instruction data buses, since little bit correlation can be observed in the instruction data. Our experiments demonstrate that the proposed encoding can reduce up to 42% of switching activity, with an average of 30% reduction, while MPBI achieves just 17.6% reduction in switching activity.

  5. Air quality on bus routes in Umea, Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Sandberg, H.; Forsberg, B. [Dept. of Environmental Health and Dept. of Public Health and Clinical Medicine, Umea University SE, Umea (Sweden)

    2000-07-01

    Bus traffic in some local streets with up to 650 buses per day has resulted in complaints about air pollution and suggestions from residents that the bus routes should be changed to other streets. We have studied nitrogen dioxide and benzene concentrations at five exposed sites and at two representative control sites without bus traffic, and found no general differences in air quality. However, the site and temperature adjusted concentrations fell significantly during a strike among bus drivers. (authors)

  6. Framework for Bus Rapid Transit Development and Deployment Planning

    OpenAIRE

    Miller, Mark A.; Yin, Yafeng; Balvanyos, Tunde; Ceder, Avishai

    2004-01-01

    This report presents the results of its investigation into deployment planning for bus rapid transit systems. In this study, we conducted a macro-scale examination of bus rapid transit systems from technical, operational, institutional, and planning perspectives. We then developed the theoretical foundation for a deployment planning framework for bus rapid transit systems that specifically takes into account the unique features of bus rapid transit that differ from other transit alternatives....

  7. Bus Stops, This shapefile contains existing bus stops for Charlotte Area Transit System, Published in 2006, Charlotte Area Transit System.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Bus Stops dataset, was produced all or in part from Field Survey/GPS information as of 2006. It is described as 'This shapefile contains existing bus stops for...

  8. Peptic ulcer among urban bus drivers in Denmark

    DEFF Research Database (Denmark)

    Netterstrøm, Bo; Juel, K

    1990-01-01

    As part of a survey on the work environment of bus drivers, 2045 (83%) of 2465 male bus drivers in the three major cities in Denmark in 1978 answered a postal questionnaire on health and working conditions. In order to evaluate the relative occurrence of peptic ulcer among the bus drivers, a follow...

  9. An appraisal of QR code use to deliver bus arrival time information at bus stops in Southampton

    OpenAIRE

    Gammer, Nick

    2011-01-01

    The provision of at-stop bus arrival time information has numerous potential benefits to bus users. With real-time passenger information well established in the UK the challenge is relaying accurate bus arrival times to passengers in a cost effective manner. Display screens are costly to install and maintain, rendering placement at all bus stops economically undesirable. QR codes represent an inexpensive alternative to delivering this information, usually at zero marginal cost to users. Q...

  10. FUEL CELL BUS DEMONSTRATION IN MEXICO CITY

    Science.gov (United States)

    The report discusses the performance of a cull-size, zero-emission, Proton Exchange Membrane (PEM) fuel-cell-powered transit bus in the atmospheric environment of Mexico City. To address the air quality problems caused by vehicle emissions in Mexico City, a seminar on clean vehic...

  11. Inrush-Current Limiter And Bus Isolator

    Science.gov (United States)

    Dolland, Carlisle R.

    1994-01-01

    Electronic circuit protects electrical power bus and source of power against excessive current demands. Circuit intended for use with power-consuming electronic system drawing pulsed currents and including capacitor bank as low-impedance secondary source from which pulsed currents drawn.

  12. Repeater For A Digital-Communication Bus

    Science.gov (United States)

    Torres-Guzman, Esteban; Olson, Stephen; Heaps, Tim

    1993-01-01

    Digital repeater circuit designed to extend range of communication on MIL-STD-1553 bus beyond original maximum allowable length of 300 ft. Circuit provides two-way communication, one way at time, and conforms to specifications of MIL-STD-1553. Crosstalk and instability eliminated.

  13. Virginia School Bus Driver Training: Does Training Program Adequacy Affect school Bus Accident Rates?

    OpenAIRE

    Crews, James O

    1997-01-01

    Analysis of data provided by the Virginia Departments of Motor Vehicles, Transportation, and Education all show school buses as having a significantly higher number of accidents per hundred million miles of travel than other forms of transportation. Such statistics are alarming and formal study of school bus accident factors has been limited. The purposes of this study were to (a) establish the adequacy of the school bus driver training programs of Local Education Agencies(LEAs...

  14. Bus 54 -- Where are you? A school bus intelligent information system

    Energy Technology Data Exchange (ETDEWEB)

    Truett, L.F.; Moore, S.; Tonn, B. [Oak Ridge National Lab., TN (United States); Conley, T. [GTE Wireless, Nashville, TN (United States)

    1998-07-01

    Although major accidents involving school buses are rare (only about 0.3% of all fatal crashes since 1986 are classified as school-bus-related), even minor accidents and breakdowns cause a great deal of parental anxiety. The objective of this research is to design an efficient, cost-effective, accurate, and secure system that will track individual school buses and communicate appropriate information to the school system`s central administration unit, to the school transportation administrator, and to parents of children on the bus. The greatest benefit of the proposed information system is that parents and officials can always know the location and condition (these conditions would vary depending on the needs of a particular school system) of the school buses. In case of an accident or mechanical problem, when emergency crews are needed, they can be dispatched almost immediately with a good understanding of the problem and the exact location of the bus. In addition to being able to track the bus while the child is on board, parents will be able to determine the location of their child`s bus prior to its arrival in the morning in order to prevent the child from needing to wait outside in inclement weather. The information available to parents can also be expanded to include maps of limited routes (e.g., snow routes). Basically, the Bus 54 concept consists of a bus component and a central data processing unit. Each bus will be outfitted with a global positioning satellite (GPS) device, a wireless communication device, and wireless data communication service. The central data processing unit will receive and process information from the buses and provide information access to parents and officials via an Internet link.

  15. Design and Development of Bus/Coach Dashboard%客车仪表台的设计与开发

    Institute of Scientific and Technical Information of China (English)

    周维毅

    2015-01-01

    客车仪表台集成了车辆的一些操作件和运行工况中的主要信息,对客车行驶安全、驾驶舒适性和整车品质都起着重要的作用。本文从客车仪表台的分类出发,阐述客车仪表台的开发流程以及工程设计方法,为相关人员提供参考。%Bus/coach dashboard integrates some operation parts and main running informations, it plays an impor-tant role in driving safety, comfort and quality of the vehicle. From the classification of bus/coach dashboards,this article describes the bus dashboard development process and engineering design methods in order to provide refer-ences for relevant technicians.

  16. 客车仪表台的设计与开发%Design and Development of Bus/Coach Dashboard

    Institute of Scientific and Technical Information of China (English)

    周维毅

    2015-01-01

    客车仪表台集成了车辆的一些操作件和运行工况中的主要信息,对客车行驶安全、驾驶舒适性和整车品质都起着重要的作用。本文从客车仪表台的分类出发,阐述客车仪表台的开发流程以及工程设计方法,为相关人员提供参考。%Bus/coach dashboard integrates some operation parts and main running informations, it plays an impor-tant role in driving safety, comfort and quality of the vehicle. From the classification of bus/coach dashboards,this article describes the bus dashboard development process and engineering design methods in order to provide refer-ences for relevant technicians.

  17. Advanced eGovernment Information Service Bus (eGov-Bus

    Directory of Open Access Journals (Sweden)

    2007-01-01

    Full Text Available The eGov-Bus project provides citizens and businesses with improved access to virtual public services, which are based on existing national eGovernment Web services and which support cross-border life events. Requirements and specific rules of these life events are considered, and personalization of user preferences is supported. eGov-Bus is based on adaptable process management technologies, allowing for virtual services which are dynamically combined from existing national eGovernment services. In this way, a comprehensive workflow process is set up, allowing for service-level agreements, an audit trail and explanation of the process to the end user. The eGov-Bus process engine operates on top of a virtual repository, providing a high-level semantic view of information retrieved from heterogeneous information sources, such as eGovernment Web services. Further, eGov-Bus relies on a security framework to ensure all high-level security requirements are met. The eGov-Bus architecture is business oriented, it focuses on Service Oriented Architecture (SOA concepts, asynchronously combining Web services and providing a Service Bus.

  18. Fuel cell propulsion for urban duty vehicles: Bavarian fuel cell bus project

    International Nuclear Information System (INIS)

    Following a feasibility study and a detailed specification phase, the realization of a fuel cell city bus prototype was started in autumn 1996. The project is a joint development effort of Siemens, MAN and Linde, which receives a 50 % funding by the Bavarian State Ministry for Economic Affairs, Transport and Technology (BStMWVT) in the context of the Hydrogen Initiative Bavaria. An MAN low-floor bus will be equipped with the components for a fuel cell drive system. The PEM fuel cell is developed by the power generation division of Siemens. Four fuel cell modules deliver a total electrical output of 120 kW to the two electric motors, which are linked by a summation gearbox by the Siemens Transportation Systems Division. MAN Technologie AG is responsible for the compressed hydrogen storage system allowing for a driving range of more than 250 km, while Linde AG takes care of the hydrogen periphery and delivers the hydrogen for the test operation scheduled for the beginning of the year 2000. Project coordination is done by Ludwig-Boelkow System-technik GmbH. The project is divided into four phases. The conceptual design phase is scheduled to last until the end of 1997. The partly overlapping system integration phase will end in the first quarter of 1999. The subsequent test and commissioning phase will prepare the test operation at the beginning of 2000 with a bus operator yet to be defined. (author)

  19. Regenerative polymeric bus architecture for board-level optical interconnects.

    Science.gov (United States)

    Bamiedakis, N; Hashim, A; Penty, R V; White, I H

    2012-05-21

    A scalable multi-channel optical regenerative bus architecture based on the use of polymer waveguides is presented for the first time. The architecture offers high-speed interconnection between electrical cards allowing regenerative bus extension with multiple segments and therefore connection of an arbitrary number of cards onto the bus. In a proof-of-principle demonstration, a 4-channel 3-card polymeric bus module is designed and fabricated on standard FR4 substrates. Low insertion losses (≤ -15 dB) and low crosstalk values (bus modules using a prototype 3R regenerator.

  20. Heat Transfer in the LHC Main Superconducting Bus Bars

    CERN Document Server

    Granieri, P P; Richter, D

    2011-01-01

    CERN is performing a systematic analysis of the interconnecting bus bars of the Large Hadron Collider (LHC) main magnets. Their thermal, electrical, mechanical and hydraulic performances are addressed. In the frame of these studies, the heat transfer between the main superconducting (SC) bus bars and the surrounding He bath is investigated. It represents a key parameter in the comprehension of the bus bars stability and quench propagation mechanisms, thus crucial for the analysis of the 2008 incident which was triggered by a defective bus bars joint. This paper reports on the experimental tests and relative analysis aiming at describing the thermal behavior of the LHC main bus bars.

  1. Autonomous Navigation and Obstacle Avoidance of a Micro-bus

    Directory of Open Access Journals (Sweden)

    Carlos Fernández

    2013-04-01

    Full Text Available At present, the topic of automated vehicles is one of the most promising research areas in the field of Intelligent Transportation Systems (ITS. The use of automated vehicles for public transportation also contributes to reductions in congestion levels and to improvements in traffic flow. Moreover, electrical public autonomous vehicles are environmentally friendly, provide better air quality and contribute to energy conservation. The driverless public transportation systems, which are at present operating in some airports and train stations, are restricted to dedicated roads and exhibit serious trouble dynamically avoiding obstacles in the trajectory. In this paper, an electric autonomous mini-bus is presented. All datasets used in this article were collected during the experiments carried out in the demonstration event of the 2012 IEEE Intelligent Vehicles Symposium that took place in Alcalá de Henares (Spain. The demonstration consisted of a route 725 metres long containing a list of latitude-longitude points (waypoints. The mini-bus was capable of driving autonomously from one waypoint to another using a GPS sensor. Furthermore, the vehicle is provided with a multi-beam Laser Imaging Detection and Ranging (LIDAR sensor for surrounding reconstruction and obstacle detection. When an obstacle is detected in the planned path, the planned route is modified in order to avoid the obstacle and continue its way to the end of the mission. On the demonstration day, a total of 196 attendees had the opportunity to get a ride on the vehicles. A total of 28 laps were successfully completed in full autonomous mode in a private circuit located in the National Institute for Aerospace Research (INTA, Spain. In other words, the system completed 20.3 km of driverless navigation and obstacle avoidance.

  2. Electric drives

    CERN Document Server

    Boldea, Ion

    2005-01-01

    ENERGY CONVERSION IN ELECTRIC DRIVESElectric Drives: A DefinitionApplication Range of Electric DrivesEnergy Savings Pay Off RapidlyGlobal Energy Savings Through PEC DrivesMotor/Mechanical Load MatchMotion/Time Profile MatchLoad Dynamics and StabilityMultiquadrant OperationPerformance IndexesProblemsELECTRIC MOTORS FOR DRIVESElectric Drives: A Typical ConfigurationElectric Motors for DrivesDC Brush MotorsConventional AC MotorsPower Electronic Converter Dependent MotorsEnergy Conversion in Electric Motors/GeneratorsPOWER ELECTRONIC CONVERTERS (PECs) FOR DRIVESPower Electronic Switches (PESs)The

  3. BUS 475 UOP Course Tutorial/ Tutorialrank

    OpenAIRE

    john

    2015-01-01

    For more course tutorials visit www.tutorialrank.com Tutorial Purchased: 6 Times, Rating: A+   BUS 475 Capstone Final Examination Part 1   1.    In the managerial function of __________, managers encourage and motivate workers to work toward organizational goals.   2.    eBay.com is a vast auction site that is similar to a competitive market in some ways but differs from it in others. Which of the following describes...

  4. Exposure Assessment of Diesel Bus Emissions

    Directory of Open Access Journals (Sweden)

    Werner Hofmann

    2006-12-01

    Full Text Available The goal of this study was to measure ultrafine particle concentrations with diameters less than 1 μm emitted by diesel buses and to assess resulting human exposure levels. The study was conducted at the Woolloongabba Busway station in Brisbane, Australia in the winter months of 2002 during which temperature inversions frequently occurred. Most buses that utilize the station are fuelled by diesel, the exhaust of which contains a significant quantity of particle matter. Passengers waiting at the station are exposed to these particles emitted from the buses. During the course of this study, passenger census was conducted, based on video surveillance, yielding person-by-person waiting time data. Furthermore, a bus census revealed accurate information about the total number of diesel versus Compressed Natural Gas (CNG powered buses. Background (outside of the bus station and platform measurements of ultrafine particulate number size distributions were made to determine ambient aerosol concentrations. Particle number exposure concentration ranges from 10 and 40 to 60% of bus related exhaust fumes. This changes dramatically when considering the particle mass exposure concentration, where most passengers are exposed to about 50 to 80% of exhaust fumes. The obtained data can be very significant for comparison with similar work of this type because it is shown in previous studies that exhaust emissions causes cancer in laboratory animals. It was assumed that significant differences between platform and background distributions were due to bus emissions which, combined with passenger waiting times, yielded an estimate of passenger exposure to ultrafine particles from diesel buses. From an exposure point of view, the Busway station analyzed resembles a street canyon. Although the detected exhaust particle concentration at the outbound platform is found to be in the picogram range, exposure increases with the time passengers spend on the platform

  5. The effects of driver training on simulated driving performance

    OpenAIRE

    Dorn, Lisa; Barker, D.

    2005-01-01

    Given that the beneficial effects of driver training on accident risk may not be an appropriate criterion measure, this study investigates whether professionally trained and experienced drivers exhibit safer driving behaviour in a simulated driving task compared with drivers without professional driver training. A sample of 54 police trained drivers and a sample of 56 non-police trained drivers were required to complete two tasks. Firstly to overtake a slow-moving bus on a hazardous stretch o...

  6. Brazilian hybrid electric fuel cell bus

    Energy Technology Data Exchange (ETDEWEB)

    Miranda, P.E.V.; Carreira, E.S. [Coppe-Federal Univ. of Rio de Janeiro (Brazil). Hydrogen Lab.

    2010-07-01

    The first prototype of a hybrid electric fuel cell bus developed with Brazilian technology is unveiled. It is a 12 m urban-type, low-floor, air-conditioned bus that possesses three doors, air suspension, 29 seats and reversible wheelchair site. The bus body was built based on a double-deck type monoblock vehicle that is able to sustain important load on its roof. This allowed positioning of the type 3 hydrogen tanks and the low weight traction batteries on the roof of the vehicles without dynamic stabilization problems. A novel hybrid energy configuration was designed in such a way that the low-power (77 kWe) fuel cell works on steady-state operation mode, not responding directly to the traction motor load demand. The rate of kinetic energy regeneration upon breaking was optimized by the use of an electric hybrid system with predominance of batteries and also by utilizing supercapacitors. The electric-electronic devices and the security control softwares for the auxiliary and traction systems were developed in-house. The innovative hybrid-electric traction system configuration led to the possibility to decrease the fuel cell power, with positive impact on weight and system volume reduction, as well as to significantly decrease the hydrogen consumption. (orig.)

  7. Electrical motor/generator drive apparatus and method

    Energy Technology Data Exchange (ETDEWEB)

    Su, Gui Jia

    2013-02-12

    The present disclosure includes electrical motor/generator drive systems and methods that significantly reduce inverter direct-current (DC) bus ripple currents and thus the volume and cost of a capacitor. The drive methodology is based on a segmented drive system that does not add switches or passive components but involves reconfiguring inverter switches and motor stator winding connections in a way that allows the formation of multiple, independent drive units and the use of simple alternated switching and optimized Pulse Width Modulation (PWM) schemes to eliminate or significantly reduce the capacitor ripple current.

  8. Impaired Driving

    Science.gov (United States)

    ... help prevent injuries and deaths from alcohol-impaired driving. The Problem Risk Factors BAC Effects Prevention Additional Resources How big is the problem? In 2014, 9,967 people were killed in alcohol-impaired driving crashes, accounting for nearly one-third (31%) of ...

  9. Distracted Driving

    Science.gov (United States)

    ... 18%) in which someone was injured involved distracted driving. 1 What are the risk factors? Activities Some activities—such as texting—take the driver’s attention away from driving more frequently and for longer periods than other ...

  10. The SMART MIL-STD-1553 bus adapter hardware manual

    Science.gov (United States)

    Ton, T. T.

    1981-01-01

    The SMART Multiplexer Interface Adapter, (SMIA) a complete system interface for message structure of the MIL-STD-1553, is described. It provides buffering and storage for transmitted and received data and handles all the necessary handshaking to interface between parallel 8-bit data bus and a MIL-STD serial bit stream. The bus adapter is configured as either a bus controller of a remote terminal interface. It is coupled directly to the multiplex bus, or stub coupled through an additional isolation transformer located at the connection point. Fault isolation resistors provide short circuit protection.

  11. Multi-Gigabit Rate Radiation Hard Bus Project

    Data.gov (United States)

    National Aeronautics and Space Administration — High speed robust very low power radiation hardened bus interconnects are required to accelerate on-board computations, further improve reconfigurability and...

  12. Bus accident severity and passenger injury: evidence from Denmark

    DEFF Research Database (Denmark)

    Prato, Carlo Giacomo; Kaplan, Sigal

    2014-01-01

    light. Occurrence of injury to bus passengers is positively related to (i) the involvement of heavy vehicles, (ii) crossing intersections in yellow or red light, (iii) open areas, (iv) high speed limits, and (v) slippery road surface. Conclusions The findings of the current study provide a comprehensive...... examining occurrence of injury to bus passengers. Results Bus accident severity is positively related to (i) the involvement of vulnerable road users, (ii) high speed limits, (iii) night hours, (iv) elderly drivers of the third party involved, and (v) bus drivers and other drivers crossing in yellow or red...

  13. Status of the IEEE P896 Future Backplane Bus

    International Nuclear Information System (INIS)

    The IEEE P896 Future Backplane Bus project has been influenced by and has influenced FASTBUS and several other contemporary bus designs. This paper summarizes the current status of that project, which is directed toward the needs of modern 32-bit microprocessor systems with multiple processors. Some of the technology developed for P896 will be important for future non-ECL implementations of FASTBUS and other buses. In particular, new bus drivers and receivers should greatly improve the performance and reliability of backplane buses and cable buses. The current status of the P896 serial bus is also summarized

  14. Oracle Service Bus 11g Development Cookbook

    CERN Document Server

    Schmutz, Guido; van Zoggel, Jan

    2012-01-01

    This cookbook is full of immediately useable recipes showing you how to develop service and message-oriented (integration) applications on the Oracle Service Bus. In addition to its cookbook style, which ensures the solutions are presented in a clear step-by-step manner, the explanations go into great detail, which makes it good learning material for everyone who has experience in OSB and wants to improve. Most of the recipes are designed in such a way that each recipe is presented as a separate, standalone entity and reading of prior recipes is not required. The finished solution of each reci

  15. Bus bar joints stability and protection

    CERN Document Server

    Verweij, A

    2009-01-01

    A defective bus connection between two dipole magnets was the primary cause of the incident in sector 34 on September 19th. I will show how this could have happened, i.e. how a highly resistive joint has caused a thermal runaway and burned (or opened) before the QPS threshold was reached. In the second part of the talk I will present the new detection limits for the QPS upgrade of the RB and RQ circuits, required to avoid similar thermal runaways in the future.

  16. Redesign of Transjakarta Bus Driver's Cabin

    Science.gov (United States)

    Mardi Safitri, Dian; Azmi, Nora; Singh, Gurbinder; Astuti, Pudji

    2016-02-01

    Ergonomic risk at work stations with type Seated Work Control was one of the problems faced by Transjakarta bus driver. Currently “Trisakti” type bus, one type of bus that is used by Transjakarta in corridor 9, serving route Pinang Ranti - Pluit, gained many complaints from drivers. From the results of Nordic Body Map questionnaires given to 30 drivers, it was known that drivers feel pain in the neck, arms, hips, and buttocks. Allegedly this was due to the seat position and the button/panel bus has a considerable distance range (1 meter) to be achieved by drivers. In addition, preliminary results of the questionnaire using Workstation Checklist identified their complaints about uncomfortable cushion, driver's seat backrest, and the exact position of the AC is above the driver head. To reduce the risk level of ergonomics, then did research to design the cabin by using a generic approach to designing products. The risk analysis driver posture before the design was done by using Rapid Upper Limb Assessment (RULA), Rapid Entire Body Assessment (REBA), and Quick Exposure Checklist (QEC), while the calculation of the moment the body is done by using software Mannequin Pro V10.2. Furthermore, the design of generic products was done through the stages: need metric-matrix, house of quality, anthropometric data collection, classification tree concept, concept screening, scoring concept, design and manufacture of products in the form of two-dimensional. While the design after design risk analysis driver posture was done by using RULA, REBA, and calculation of moments body as well as the design visualized using software 3DMax. From the results of analysis before the draft design improvements cabin RULA obtained scores of 6, REBA 9, and the result amounted to 57.38% QEC and moment forces on the back is 247.3 LbF.inch and on the right hip is 72.9 LbF.in. While the results of the proposed improvements cabin design RULA obtained scores of 3, REBA 4, and the moment of force on

  17. Evolutionary algorithm for vehicle driving cycle generation.

    Science.gov (United States)

    Perhinschi, Mario G; Marlowe, Christopher; Tamayo, Sergio; Tu, Jun; Wayne, W Scott

    2011-09-01

    Modeling transit bus emissions and fuel economy requires a large amount of experimental data over wide ranges of operational conditions. Chassis dynamometer tests are typically performed using representative driving cycles defined based on vehicle instantaneous speed as sequences of "microtrips", which are intervals between consecutive vehicle stops. Overall significant parameters of the driving cycle, such as average speed, stops per mile, kinetic intensity, and others, are used as independent variables in the modeling process. Performing tests at all the necessary combinations of parameters is expensive and time consuming. In this paper, a methodology is proposed for building driving cycles at prescribed independent variable values using experimental data through the concatenation of "microtrips" isolated from a limited number of standard chassis dynamometer test cycles. The selection of the adequate "microtrips" is achieved through a customized evolutionary algorithm. The genetic representation uses microtrip definitions as genes. Specific mutation, crossover, and karyotype alteration operators have been defined. The Roulette-Wheel selection technique with elitist strategy drives the optimization process, which consists of minimizing the errors to desired overall cycle parameters. This utility is part of the Integrated Bus Information System developed at West Virginia University. PMID:22010377

  18. Driving offences

    OpenAIRE

    Corbett, C

    2010-01-01

    Copyright @ 2010, Taylor & Francis Group. This material is posted on this site with the permission of the publishers. This chapter on driving offences will largely follow the template of earlier chapters except that owing to their vast number, a limited selection only will be examined based on their high volume, seriousness and public concern. The first section will define what driving offences are, how they developed alongside the emerging car culture, and it will consider the contempora...

  19. Network Extender for MIL-STD-1553 Bus

    Science.gov (United States)

    Marcus, Julius; Hanson, T. David

    2003-01-01

    An extender system for MIL-STD-1553 buses transparently couples bus components at multiple developer sites. The bus network extender is a relatively inexpensive system that minimizes the time and cost of integration of avionic systems by providing a convenient mechanism for early testing without the need to transport the usual test equipment and personnel to an integration facility. This bus network extender can thus alleviate overloading of the test facility while enabling the detection of interface problems that can occur during the integration of avionic systems. With this bus extender in place, developers can correct and adjust their own hardware and software before products leave a development site. Currently resident at Johnson Space Center, the bus network extender is used to test the functionality of equipment that, although remotely located, is connected through a MILSTD- 1553 bus. Inasmuch as the standard bus protocol for avionic equipment is that of MIL-STD-1553, companies that supply MIL-STD-1553-compliant equipment to government or industry and that need long-distance communication support might benefit from this network bus extender

  20. A High Efficiency DC Bus Regulator / RPC for Spacecraft Applications

    Science.gov (United States)

    Birchenough, Arthur G.

    2004-02-01

    DC bus voltage regulation may be required in future high powered spacecraft due to the length of the busses or because they are not generated at precise voltage levels. In these cases the regulation range is often only a few percent increase or decrease, but conventional DC voltage regulators switch all the power passing through them, and this level of power switched determines the size and losses in the regulator. A recently developed concept uses a low power DC-DC converter in series with the bus to raise or lower the bus voltage over a small range. This partial power processing technique combines the small size and power losses of the low power converter with the ability to regulate, (over a small range) a high power bus. The Series Connected Buck Boost Regulator (SCBBR) described herein provides bus regulation with an efficiency of 98%. The circuit also provides bus switching and overcurrent limiting functions of a Remote Power Controller (RPC). This paper describes the circuit design and performance of a breadboard SCBBR configured as a bus voltage regulator providing +/- 40% voltage regulation range, bus switching, and overload limiting.

  1. Connecticut Transit (CTTRANSIT) Fuel Cell Transit Bus: Preliminary Evaluation Results

    Energy Technology Data Exchange (ETDEWEB)

    Chandler, K.; Eudy, L.

    2008-10-01

    This report provides preliminary results from a National Renewable Energy Laboratory evaluation of a protoptye fuel cell transit bus operating at Connecticut Transit in Hartford. Included are descriptions of the planned fuel cell bus demonstration and equipment; early results and agency experience are also provided.

  2. Network Analysis of Urban Traffic with Big Bus Data

    CERN Document Server

    Zhao, Kai

    2016-01-01

    Urban traffic analysis is crucial for traffic forecasting systems, urban planning and, more recently, various mobile and network applications. In this paper, we analyse urban traffic with network and statistical methods. Our analysis is based on one big bus dataset containing 45 million bus arrival samples in Helsinki. We mainly address following questions: 1. How can we identify the areas that cause most of the traffic in the city? 2. Why there is a urban traffic? Is bus traffic a key cause of the urban traffic? 3. How can we improve the urban traffic systems? To answer these questions, first, the betweenness is used to identify the most import areas that cause most traffics. Second, we find that bus traffic is not an important cause of urban traffic using statistical methods. We differentiate the urban traffic and the bus traffic in a city. We use bus delay as an identification of the urban traffic, and the number of bus as an identification of the bus traffic. Third, we give our solutions on how to improve...

  3. Review of bus drivers' occupational stress and stress prevention

    NARCIS (Netherlands)

    Kompier, M.A.J.; Di Martino, V.

    1995-01-01

    Although heterogeneous in methodology and content, 32 studies from 13 countries on bus drivers' work and health are similar in their conclusions. Bus-driving–characterized by high demands, low control and low support – can be regarded as a classic example of high-strain occupation, with high risks o

  4. Djungle power. A more remote AC bus

    Energy Technology Data Exchange (ETDEWEB)

    Boehnke, Heinz W. [Technosol, Jork (Germany)

    2010-07-01

    The Dzanga-Sangha Reserve in the Central African Republic is probably one of the world's most remote protected rainforest areas, much to the benefit of the rare species of lowland gorilla, forest elephant and local pygmy population Ba'Aka. The park is co-managed by the ''WWF-World Wide Fund for Nature'' with sponsoring from the German Regenwald-Stiftung. In 2008 wwf decided to switch from the old, failing generator supply to a solar hybrid mini-grid, along with stringent measures of energy conservation and management. After a careful energy audit Technosol designed an AC-bus system with a 22 kWp PV generator which should overcome the dependency on the old generators and their fuel demands. For 15 buildings, an entirely new distribution network was installed, state of the art energy saving devices introduced and an energy metering system deviced. The installation is operating since August 2009. In such remote locations, the reliability of the AC-bus over other generator-based solutions will be demonstrated and with the support of international organisations like the wwf the practical application of solar hybrid supply becomes a landmark of sustainable energy concepts. (orig.)

  5. Testing the effects of safety climate and disruptive children behavior on school bus drivers performance: A multilevel model.

    Science.gov (United States)

    Zohar, Dov; Lee, Jin

    2016-10-01

    The study was designed to test a multilevel path model whose variables exert opposing effects on school bus drivers' performance. Whereas departmental safety climate was expected to improve driving safety, the opposite was true for in-vehicle disruptive children behavior. The driving safety path in this model consists of increasing risk-taking practices starting with safety shortcuts leading to rule violations and to near-miss events. The study used a sample of 474 school bus drivers in rural areas, driving children to school and school-related activities. Newly developed scales for measuring predictor, mediator and outcome variables were validated with video data taken from inner and outer cameras, which were installed in 29 buses. Results partially supported the model by indicating that group-level safety climate and individual-level children distraction exerted opposite effects on the driving safety path. Furthermore, as hypothesized, children disruption moderated the strength of the safety rule violation-near miss relationship, resulting in greater strength under high disruptiveness. At the same time, the hypothesized interaction between the two predictor variables was not supported. Theoretical and practical implications for studying safety climate in general and distracted driving in particular for professional drivers are discussed. PMID:27423431

  6. An Overview of Staged-bus Operation in Cities

    Directory of Open Access Journals (Sweden)

    Mohammad Hesam Hafezi

    2014-02-01

    Full Text Available In developing countries, demand for passenger travel is higher, due to economic growth. Government policy encourages people to use public transportation instead of their private carsto reduce of traffic congestion and air pollution. In the city areas, bus networks are the major part of the public transportation system because they are easily accessible and cheaper compared to other types of public transportation. In this study revelation of details of bus operation included different agents is studied. Bus operations, during provision of their service, have interaction with three main agents: bus agent, passenger agent and traffic agent. Study of the influence of each agent in bus operation is presented in this study, using the macroscopic way.

  7. Research on the Coordinated Design of Bus and Taxi Station

    Directory of Open Access Journals (Sweden)

    Jiangfeng Xi

    2015-01-01

    Full Text Available Rises in the number of transit buses, bus routes, and overall traffic volume in China’s cities, coupled with interference from other transport modes, such as taxis loading and unloading passengers nearby, have led to increasing traffic delays at bus stops, which is considered one of the factors degrading service levels and traffic operations on urban roadways. This paper studies traffic characteristics at bus stops, investigates variations in delay from different types or designs of bus stops, and analyzes the impact of it on traffic capacity, the purpose of which is to propose a solution to predicting the feasibility of an integrated design of bus stops and taxi stands with the help of mathematical models and based on the objectives of optimal traffic operations and passenger transfer.

  8. Low back trouble among urban bus drivers in Denmark

    DEFF Research Database (Denmark)

    Netterstrøm, Bo; Juel, K

    1989-01-01

    The occurrence of low back trouble and possible connection with psychosocial conditions among urban bus drivers were studied using a questionnaire and subsequent registration of hospital discharges. 2,045 (83%) full-time male bus drivers in the three largest cities in Denmark answered a questionn......The occurrence of low back trouble and possible connection with psychosocial conditions among urban bus drivers were studied using a questionnaire and subsequent registration of hospital discharges. 2,045 (83%) full-time male bus drivers in the three largest cities in Denmark answered...... a questionnaire in 1978 regarding psychosocial factors and health. The prevalence of frequent low back pain was 57%. In a control group of 195 motormen the prevalence was 40%. Standardized Morbidity Ratio for bus drivers discharged from hospital during the period 1978-1984 with the diagnosis lumbar disc...

  9. [Stress of driving: general overview].

    Science.gov (United States)

    Costa, G

    2012-01-01

    Driving is a stressful task that requires high levels of attention and vigilance to cope properly with job demands, mainly related to working hours and timetables, weather and traffic conditions, passengers and goods safety, responsibility in case of error and/or accident. Scientific literature shows a higher prevalence of cardiovascular, gastrointestinal, neuropsychic and musculoskeletal disorders, and consequent sick leaves, in professional bus/lorry and train drivers. Several studies have emphasized that stress, fatigue and excessive sleepiness give a significant contribution to occupational road and rail accidents. There are noteworthy, interindividual differences concerning alertness/sleepiness and tolerance to fatigue, related to psychophysiological and behavioural characteristics and health status, in particular: age, ability to overcome drowsiness, morningness/eveningness, diet and intake of psychotropic substances (alcohol, drugs, medicaments), primary and secondary sleep disorders (insomnia, ipersomnias, parasomnias). PMID:23213814

  10. Design of GPS-based speed-limiting and bus station announcement system for bus%基于GPS公交车限速报站系统设计

    Institute of Scientific and Technical Information of China (English)

    袁卫

    2012-01-01

    A vehicle-mounted system with C8051F040 MCU as the control core is designed based on GPS and used to realize automatic bus station announcement. Firstly, voice information of each station is recorded by a sound recording interface. The system automatically indentifies next station and reports the station name,while the bus is driving. At the same time, maximum of driving speed is set. Once the bus exceeds the set speed, the system completes the function of voice warning. In addition, the system has the function of accurate positioning and can operate day and night.%为实现公交车的自动报站功能,提出一种以C8051F040单片机和GPS卫星定位系统的设计方案.首先设置通过录音接口预存各站点具体位置的语音信息,当公交车在行驶时,能自动识别站点并完成语音报站功能,同时可设置公交车行驶的上限速度,当超过该速度值时,系统将完成语音报警提示.该系统定位准确,并可实现全天侯工作.

  11. The wheels on the bus go "buy buy buy": school bus advertising laws.

    Science.gov (United States)

    Pomeranz, Jennifer L

    2012-09-01

    School buses, a practical necessity for millions of children, are at the center of new efforts to raise revenue. School bus advertising laws bring public health and commercialization concerns to the school setting. In doing so, they potentially expose school districts to First Amendment lawsuits. I examined various school bus advertising bills and laws. I reviewed First Amendment "forum analysis" as applied in the transit and school settings to clarify how this legal test may affect school districts subject to such laws. I have made recommendations for school districts to enact appropriate policies to ensure that such advertising does not undermine public health and to enable the districts to maintain control over their property.

  12. Bus bar electrical feedthrough for electrorefiner system

    Science.gov (United States)

    Williamson, Mark; Wiedmeyer, Stanley G; Willit, James L; Barnes, Laurel A; Blaskovitz, Robert J

    2013-12-03

    A bus bar electrical feedthrough for an electrorefiner system may include a retaining plate, electrical isolator, and/or contact block. The retaining plate may include a central opening. The electrical isolator may include a top portion, a base portion, and a slot extending through the top and base portions. The top portion of the electrical isolator may be configured to extend through the central opening of the retaining plate. The contact block may include an upper section, a lower section, and a ridge separating the upper and lower sections. The upper section of the contact block may be configured to extend through the slot of the electrical isolator and the central opening of the retaining plate. Accordingly, relatively high electrical currents may be transferred into a glovebox or hot-cell facility at a relatively low cost and higher amperage capacity without sacrificing atmosphere integrity.

  13. Swisstrolley 3 - An articulated trolley bus; SWISSTROLLEY 3. Gelenktrolleybus

    Energy Technology Data Exchange (ETDEWEB)

    Gisler, H.-J.

    2006-07-01

    This illustrated final report for the Swiss Federal Office of Energy (SFOE) takes a look at the Swisstrolley 3 low-floor, articulated trolley bus developed in Switzerland by the Hess AG company. Various features of the variants of the trolley bus, including single vehicle, single and double-articulated buses and bus trailers, are discussed. The reductions achieved in energy consumption, weight and noise are discussed. Typical values for power consumption are presented in graphical form. Economic viability and passenger-friendliness are examined, as are possibilities for further improvement.

  14. Development in Conducting Bus of RE-Al Alloys

    Institute of Scientific and Technical Information of China (English)

    李德富; 胡捷; 章萍芝; 石瑛; 李彦利

    2001-01-01

    Four kinds of deformed aluminum alloys were tested. One kind of RE-A1-Mg-Si alloy, which possessed high conductivity and strength, was the first priority by contrast test, The large specification bus of conducting aluminum all oys was made by thermomechanical process during the industrial experiment. The properties of the bus are as follows:the tensile strength σb is 238 MPa, the conductivity (v.s. IACS) is 54.3%, and the current-carrying capacity is beyond 3.1kA during working process. This kind of RE-Al alloy bus has been applied to several electrical transmitting and transforming work.

  15. A new MV bus transfer scheme for nuclear power plants

    Directory of Open Access Journals (Sweden)

    Chang Choong-Koo

    2015-01-01

    Full Text Available Fast bus transfer method is the most popular and residual voltage transfer method that is used as a backup in medium voltage buses in general. The use of the advanced technology like open circuit voltage prediction and digital signal processing algorithms can improve the reliability of fast transfer scheme. However, according to the survey results of the recent operation records in nuclear power plants, there were many instances where the fast transfer scheme has failed. To assure bus transfer in any conditions and circumstances, uninterruptible bus transfer scheme utilizing the state of the art medium voltage UPS is discussed and elaborated.

  16. Integrated Smart Feeder / Shuttle Bus Service

    OpenAIRE

    Ceder, Avishai; Yim, Youngbin

    2003-01-01

    This paper presents the design of an integrated smart feeder/shuttle system. The design of such a system was motivated by the need to provide easy access to main haul transit services. Park and ride lots in many train stations can no longer accommodate automobiles brought to the stations. Some train riders have switched their mode of transportation from public transit to solo driving. Shortage of parking spaces at rail stations encourages passengers to drive alone, hence more cars on freeways...

  17. Rfid-Based Automatic Bus Ticketing: Features and Trends

    Science.gov (United States)

    Oudah, A.

    2016-02-01

    Recent advancements in various technologies have made remarkable developments in various fields for public welfare and public transport is one such area. In the near future public bus transport system with advanced technologies like Radio Frequency Identification Device (RFID), GSM, GPS, ZigBee and RF modules will gain spotlight due to their advantage of higher convenience and greater life standards as compared to the conventional bus systems. In this paper, a comprehensive review of all several proposed bus ticketing and bus information methods has been presented in detail. The study brings out improved solution in terms of cost, convenience, user satisfaction and future implementation. The choice of working modules and their efficient performance has been discussed along with the highlighted importance of the need of technology for welfare of common public and visually impaired.

  18. Constant of heat conduction and stabilization of bus bar conductor

    Science.gov (United States)

    López, G.

    Using the one-dimensional, time-independent conduction state, a constant of heat conduction is given bringing about the known stabilization theorem and a closed expression for the bus bar to be cryogenically stable in superconducting accelerators.

  19. Black silicon solar cells with black bus-bar strings

    DEFF Research Database (Denmark)

    Davidsen, Rasmus Schmidt; Tang, Peter Torben; Mizushima, Io;

    2016-01-01

    We present the combination of black silicon texturing and blackened bus-bar strings as a potential method for obtaining all-black solar panels, while using conventional, front-contacted solar cells. Black silicon was realized by maskless reactive ion etching resulting in total, average reflectance...... below 0.5% across a 156x156 mm2 silicon wafer. Four different methods to obtain blackened bus-bar strings were compared with respect to reflectance, and two of these methods (i.e., oxidized copper and etched solder) were used to fabricate functional allblack solar 9-cell panels. The black bus-bars (e.......g., by oxidized copper) have a reflectance below 3% in the entire visible wavelength range. The combination of black silicon cells and blackened bus-bars results in aesthetic, all-black panels based on conventional, front-contacted solar cells without compromising efficiency....

  20. Optimization Model for Headway of a Suburban Bus Route

    Directory of Open Access Journals (Sweden)

    Xiaohong Jiang

    2014-01-01

    Full Text Available Due to relatively low passenger demand, headways of suburban bus route are usually longer than those of urban bus route. Actually it is also difficult to balance the benefits between passengers and operators, subject to the service standards from the government. Hence the headway of a suburban bus route is usually determined on the empirical experience of transport planners. To cope with this problem, this paper proposes an optimization model for designing the headways of suburban bus routes by minimizing the operating and user costs. The user costs take into account both the waiting time cost and the crowding cost. The feasibility and validity of the proposed model are shown by applying it to the Route 206 in Jiangning district, Nanjing city of China. Weightages of passengers’ cost and operating cost are further discussed, considering different passenger flows. It is found that the headway and objective function are affected by the weightages largely.

  1. Optimal control system of the intermittent bus-only approach

    Institute of Scientific and Technical Information of China (English)

    Jie Jiang; Yulin Chang

    2014-01-01

    To guarantee bus priority with a minimum impact on car traffic at intersections, an optimal control system of the intermittent bus-only approach (IBA) was proposed. The problems of the existing system are first solved through optimization: the judgment time of the IBA system was advanced to allow a bus to jump car queues if the bus was detected to arrive at the intersection, and the instant that the IBA lane became available to cars was controlled dynamically to increase the capacity of the IBA lane. The total car delay in one cycle was then analyzed quantitatively when implementing the optimal control system. The results show that in comparison with the existing system of the IBA, the car delay is greatly reduced and the probability of a car stopping twice is low after optimizing the IBA system.

  2. Study on the Bus Real-time Dispatching Model

    Institute of Scientific and Technical Information of China (English)

    YingZou; JianguoLi; JianhuaHuang; ZhenminTang

    2004-01-01

    The real-time dispatching model on bus system is studied in this article. Realtime dispatching can resume the planned schedule quickly, and then to ensure the reliability of the public transport service and to well raise the service quality.

  3. Global Optimization for Bus Line Timetable Setting Problem

    Directory of Open Access Journals (Sweden)

    Qun Chen

    2014-01-01

    Full Text Available This paper defines bus timetables setting problem during each time period divided in terms of passenger flow intensity; it is supposed that passengers evenly arrive and bus runs are set evenly; the problem is to determine bus runs assignment in each time period to minimize the total waiting time of passengers on platforms if the number of the total runs is known. For such a multistage decision problem, this paper designed a dynamic programming algorithm to solve it. Global optimization procedures using dynamic programming are developed. A numerical example about bus runs assignment optimization of a single line is given to demonstrate the efficiency of the proposed methodology, showing that optimizing buses’ departure time using dynamic programming can save computational time and find the global optimal solution.

  4. Bus Passenger Recognition and Track of Video Sequence

    Directory of Open Access Journals (Sweden)

    Donghua Zhou

    2013-06-01

    Full Text Available Study on bus passenger recognition and track of video sequence is a research aiming at realizing making a statistics on passenger flow volume of bus, which not only helps traffic services center rationally schedule vehicles, but also can avoid overload. The system makes machine vision technology and digital image processing technique applied in customer counting of bus. The key questions in the study include effective collection of video image, effective extraction of moving object in sequence images, recognition of moving targets, trace and count of moving objects. The paper makes deep analysis on relevant technology from the perspective of the theory and practical application of the algorithm, and the study makes achievements. The theoretical algorithm for the study on bus passenger recognition and track of video sequence is distinctive. The practical experiments indicate that the system can satisfy the real-time requirements, and can accurately make statistics on the number of passengers, which has great application value.

  5. Examining the Optimal Fuel Type for Urban Bus Operations

    OpenAIRE

    CAULFIELD, BRIAN

    2010-01-01

    PUBLISHED Washington D.C. Public service fleets offer an attractive option for introducing renewable fuels and alternative technologies on a large scale, which allow for the reduction of both greenhouse gas emissions and exhaust air pollutants. This paper ex amines the use of biomethane (bio-CNG) and compressed natural gas (CNG) for part of the bus fleet in Dublin. Dublin is typical of many international urban centres with a large bus fleet; therefore the results...

  6. Compressed natural gas bus safety: a quantitative risk assessment.

    Science.gov (United States)

    Chamberlain, Samuel; Modarres, Mohammad

    2005-04-01

    This study assesses the fire safety risks associated with compressed natural gas (CNG) vehicle systems, comprising primarily a typical school bus and supporting fuel infrastructure. The study determines the sensitivity of the results to variations in component failure rates and consequences of fire events. The components and subsystems that contribute most to fire safety risk are determined. Finally, the results are compared to fire risks of the present generation of diesel-fueled school buses. Direct computation of the safety risks associated with diesel-powered vehicles is possible because these are mature technologies for which historical performance data are available. Because of limited experience, fatal accident data for CNG bus fleets are minimal. Therefore, this study uses the probabilistic risk assessment (PRA) approach to model and predict fire safety risk of CNG buses. Generic failure data, engineering judgments, and assumptions are used in this study. This study predicts the mean fire fatality risk for typical CNG buses as approximately 0.23 fatalities per 100-million miles for all people involved, including bus passengers. The study estimates mean values of 0.16 fatalities per 100-million miles for bus passengers only. Based on historical data, diesel school bus mean fire fatality risk is 0.091 and 0.0007 per 100-million miles for all people and bus passengers, respectively. One can therefore conclude that CNG buses are more prone to fire fatality risk by 2.5 times that of diesel buses, with the bus passengers being more at risk by over two orders of magnitude. The study estimates a mean fire risk frequency of 2.2 x 10(-5) fatalities/bus per year. The 5% and 95% uncertainty bounds are 9.1 x 10(-6) and 4.0 x 10(-5), respectively. The risk result was found to be affected most by failure rates of pressure relief valves, CNG cylinders, and fuel piping.

  7. Bus Implementation Using New Low Power PFSCL Tristate Buffers

    OpenAIRE

    Neeta Pandey; Bharat Choudhary; Kirti Gupta; Ankit Mittal

    2016-01-01

    This paper proposes new positive feedback source coupled logic (PFSCL) tristate buffers suited to bus applications. The proposed buffers use switch to attain high impedance state and modify the load or the current source section. An interesting consequence of this is overall reduction in the power consumption. The proposed tristate buffers consume half the power compared to the available switch based counterpart. The issues with available PFSCL tristate buffers based bus implementation are id...

  8. Sleep patterns and sleep-related complaints of Brazilian interstate bus drivers

    Directory of Open Access Journals (Sweden)

    M.T. Mello

    2000-01-01

    Full Text Available Sleep-related complaints have become a highlight for physicians as well as public health administrators. Studies of sleep patterns and sleep-related complaints of shift workers have been useful in minimizing reduction in the quality of life due to the warping of the sleep-wake cycle. The objective of the present study was to assess patterns of sleep, sleep-related complaints as well as physical activity and scoring rates for depression and anxiety in interstate bus drivers. Data were obtained with a sleep questionnaire, with the Beck inventory for depression, and the State-Trait Anxiety Inventory (STAI. A total of 400 interstate bus drivers from the northern, southern, central-western and south-eastern regions of Brazil were interviewed. Sixty percent of the subjects interviewed presented at least one sleep-related complaint, 16% admitted to have dozed at the wheel while on duty, and 41% stated that they exercised on a regular basis. Other sleep disturbance complaints reported were: sleep latency 29'17"; physical fatigue, 59.8%; mental fatigue, 45.4%; sleepiness, 25.8%; irritability, 20.6%; insomnia, 37.5%, respiratory disturbances, 19.25% and snoring, 20.75%. Scores for anxiety and depression were not in the pathological range. The present data reinforce the view that bus drivers are generally discontent with shift work and its effects on sleep. Consequently, it is very important to establish an appropriate work schedule for drivers, besides implementing photo-therapy and physical activities in order to minimize sleepiness when driving.

  9. Driving things

    DEFF Research Database (Denmark)

    Nevile, Maurice Richard

    2015-01-01

    I explore how participants organise involvement with objects brought into the car, relative to the demands of driving and social activity. Objects in cars commonly include phones or other technologies, food, body care products, texts, clothing, bags and carry items, toys, and even animals......) Automobilities. London: Sage. Haddington, P., Keisanen, T. & Nevile, M. (Eds.) (2012) Meaning in motion: Interaction in cars. Special Issue for Semiotica, 191, 1/4. Haddington, P., Keisanen, T., Mondada, L., & Nevile, M. (Eds.) (2014) Multiactivity in social interaction: Beyond multitasking. Amsterdam...

  10. CROSS-FRONTIER PUBLIC TRANSPORT: Y BUS

    CERN Document Server

    CERN Housing Service

    2002-01-01

    'Y' buses cover the journey between Val Thoiry in France (shopping centre including'Migros' and other stores) and Blandonnet in Switzerland, where they stop outside the 'Jumbo' shop, now renamed 'Carrefour'. In France, the buses connect up Thoiry, Sergy and St. Genis, then cross the border to stop outside CERN, Meyrin, before continuing towards Geneva along the 'Route de Meyrin', stopping outside the 'La Tour' hospital, then at the terminus Blandonnet. The normal fare on French territory with a slight incursion into Switzerland for this purpose as far as CERN, Meyrin, is 1.20 Euros per single journey (ticket valid for one hour). The same amount is charged for any single journey in Switzerland. For example, the cost of a single journey between St. Genis and the 'La Tour' hospital would be 2.40 Euros. The season ticket ('Abonnement de Travail') opens the right to purchase a ticket valid over any period of seven days which entitles the holder to as many journeys as required between the bus stop nearest to the pl...

  11. The Development and Verification of a Novel ECMS of Hybrid Electric Bus

    Directory of Open Access Journals (Sweden)

    Jun Wang

    2014-01-01

    Full Text Available This paper presents the system modeling, control strategy design, and hardware-in-the-loop test for a series-parallel hybrid electric bus. First, the powertrain mathematical models and the system architecture were proposed. Then an adaptive ECMS is developed for the real-time control of a hybrid electric bus, which is investigated and verified in a hardware-in-the-loop simulation system. The ECMS through driving cycle recognition results in updating the equivalent charge and discharge coefficients and extracting optimized rules for real-time control. This method not only solves the problems of mode transition frequently and improves the fuel economy, but also simplifies the complexity of control strategy design and provides new design ideas for the energy management strategy and gear-shifting rules designed. Finally, the simulation results show that the proposed real-time A-ECMS can coordinate the overall hybrid electric powertrain to optimize fuel economy and sustain the battery SOC level.

  12. 49 CFR 393.24 - Requirements for head lamps, auxiliary driving lamps and front fog lamps.

    Science.gov (United States)

    2010-10-01

    ... Devices, and Electrical Wiring § 393.24 Requirements for head lamps, auxiliary driving lamps and front fog lamps. (a) Headlamps. Every bus, truck and truck tractor shall be equipped with headlamps as required by... specifications in FMVSS No. 108 (49 CFR 571.108), SAE J581, and SAE J583, respectively....

  13. Application of CAN Bus Technology on Zhongtong Bus%CAN总线技术在中通客车上的应用

    Institute of Scientific and Technical Information of China (English)

    赵佳

    2012-01-01

    The application status of CAN bus technology on Zhongtong bus is introduced, the methods of bus data collection and analysis on Zhongtong traditional and new energy bus are discussed and the development direction of CAN bus technology is prospected.%介绍CAN总线技术在中通客车上的应用状况,探讨中通传统客车及新能源客车的总线数据采集和分析方法。

  14. Method for in-use measurement and evaluation of the activity, fuel use, electricity use, and emissions of a plug-in hybrid diesel-electric school bus.

    Science.gov (United States)

    Choi, Hyung-Wook; Frey, H Christopher

    2010-05-01

    The purpose of this study is to demonstrate a methodology for characterizing at high resolution the energy use and emissions of a plug-in parallel-hybrid diesel-electric school bus (PHSB) to support assessments of sensitivity to driving cycles and comparisons to a conventional diesel school bus (CDSB). Data were collected using onboard instruments for a first-of-a-kind prototype PHSB and a CDSB of the same chassis and engine, operated on actual school bus routes. The engine load was estimated on the basis of vehicle specific power (VSP) and an empirically derived relationship between VSP and engine manifold absolute pressure (MAP). VSP depends on speed, acceleration, and road grade. For the PHSB, the observed electrical discharge or recharge to the traction motor battery was characterized on the basis of VSP. The energy use and emission rates of the PHSB from tailpipe and electricity use were estimated for five real-world driving cycles and compared to the engine fuel use and emissions of the CDSB. The PHSB had the greatest advantage on arterial routes and less advantage on highway or local routes. The coupled VSP-MAP modeling approach enables assessment of a wide variety of driving conditions and comparisons of vehicles with different propulsion technologies.

  15. Method for in-use measurement and evaluation of the activity, fuel use, electricity use, and emissions of a plug-in hybrid diesel-electric school bus.

    Science.gov (United States)

    Choi, Hyung-Wook; Frey, H Christopher

    2010-05-01

    The purpose of this study is to demonstrate a methodology for characterizing at high resolution the energy use and emissions of a plug-in parallel-hybrid diesel-electric school bus (PHSB) to support assessments of sensitivity to driving cycles and comparisons to a conventional diesel school bus (CDSB). Data were collected using onboard instruments for a first-of-a-kind prototype PHSB and a CDSB of the same chassis and engine, operated on actual school bus routes. The engine load was estimated on the basis of vehicle specific power (VSP) and an empirically derived relationship between VSP and engine manifold absolute pressure (MAP). VSP depends on speed, acceleration, and road grade. For the PHSB, the observed electrical discharge or recharge to the traction motor battery was characterized on the basis of VSP. The energy use and emission rates of the PHSB from tailpipe and electricity use were estimated for five real-world driving cycles and compared to the engine fuel use and emissions of the CDSB. The PHSB had the greatest advantage on arterial routes and less advantage on highway or local routes. The coupled VSP-MAP modeling approach enables assessment of a wide variety of driving conditions and comparisons of vehicles with different propulsion technologies. PMID:20380435

  16. Car Delay Model near Bus Stops with Mixed Traffic Flow

    Directory of Open Access Journals (Sweden)

    Yang Xiaobao

    2013-01-01

    Full Text Available This paper proposes a model for estimating car delays at bus stops under mixed traffic using probability theory and queuing theory. The roadway is divided to serve motorized and nonmotorized traffic streams. Bus stops are located on the nonmotorized lanes. When buses dwell at the stop, they block the bicycles. Thus, two conflict points between car stream and other traffic stream are identified. The first conflict point occurs as bicycles merge to the motorized lane to avoid waiting behind the stopping buses. The second occurs as buses merge back to the motorized lane. The average car delay is estimated as the sum of the average delay at these two conflict points and the delay resulting from following the slower bicycles that merged into the motorized lane. Data are collected to calibrate and validate the developed model from one site in Beijing. The sensitivity of car delay to various operation conditions is examined. The results show that both bus stream and bicycle stream have significant effects on car delay. At bus volumes above 200 vehicles per hour, the curbside stop design is not appropriate because of the long car delays. It can be replaced by the bus bay design.

  17. Capacity Region of a New Bus Communication Model

    Directory of Open Access Journals (Sweden)

    Zhuojun Zhuang

    2013-02-01

    Full Text Available In this paper, we study a new bus communication model, where two transmitters wish to send their corresponding private messages and a common message to a destination, while they also wish to send the common message to another receiver connected to the same wire. From an information-theoretical point of view, we first study a general case of this new model (with discrete memoryless channels. The capacity region composed of all achievable (R0,R1,R2 triples is determined for this general model, where R1 and R2 are the transmission rates of the private messages and R0 is the transmission rate of the common message. Then, the result is further explained via the Gaussian example. Finally, we give the capacity region for the new bus communication model with additive Gaussian noises and attenuation factors. This new bus communication model captures various communication scenarios, such as the bus systems in vehicles, and the bus type of communication channel in power line communication (PLC networks.

  18. Contagion processes on urban bus networks in Indian cities

    CERN Document Server

    Chatterjee, Atanu; Jagannathan, Krishna

    2015-01-01

    Bus transportation is considered as one of the most convenient and cheapest modes of public transportation in Indian cities. Due to their cost-effectiveness and wide reachability, they help a significant portion of the human population in cities to reach their destinations every day. Although from a transportation point of view they have numerous advantages over other modes of public transportation, they also pose a serious threat of contagious diseases spreading throughout the city. The presence of numerous local spatial constraints makes the process and extent of epidemic spreading extremely difficult to predict. Also, majority of the studies have focused on the contagion processes on scale-free network topologies whereas, spatially-constrained real-world networks such as, bus networks exhibit a wide-spectrum of network topology. Therefore, we aim in this study to understand this complex dynamical process of epidemic outbreak and information diffusion on the bus networks for six different Indian cities usin...

  19. Optimal Locations of Bus Stops Connecting Subways near Urban Intersections

    Directory of Open Access Journals (Sweden)

    Yuan Cui

    2015-01-01

    Full Text Available Unsuitable locations of bus stops which provide feeder transportation connecting subways near urban intersections usually lead to the low efficiency of public transport and level of passenger service. A multiobjective optimization model to distribute such stop locations is proposed to attain the shortest total walk distance of passengers and minimum delay time of cars through intersections and travel time of buses. The Pareto frontier and optimal solutions for the proposed model are given by the distance-based and enumerative methods. The Xizhimen bus stop is selected to implement case studies for verifying the validity of the proposed model. The analysis of sensitivity on possible solutions is also carried out in the case studies. The results show that the proposed model is capable of optimizing the locations of bus stops connecting subways near intersections and helpful to improve the level of passengers service and operational efficiency of public transportation.

  20. American Fuel Cell Bus Project Evaluation. Second Report

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, Leslie [National Renewable Energy Lab. (NREL), Golden, CO (United States); Post, Matthew [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-09-01

    This report presents results of the American Fuel Cell Bus (AFCB) Project, a demonstration of fuel cell electric buses operating in the Coachella Valley area of California. The prototype AFCB was developed as part of the Federal Transit Administration's (FTA's) National Fuel Cell Bus Program. Through the non-profit consortia CALSTART, a team led by SunLine Transit Agency and BAE Systems developed a new fuel cell electric bus for demonstration. SunLine added two more AFCBs to its fleet in 2014 and another in 2015. FTA and the AFCB project team are collaborating with the U.S. Department of Energy (DOE) and DOE's National Renewable Energy Laboratory to evaluate the buses in revenue service. This report summarizes the performance results for the buses through June 2015.

  1. High Performance BDR for the PCU of AlphaBus

    Science.gov (United States)

    Subrier, Laurent; Besdel, Patrick; Daubresse, Thierry; Trehet, Eric

    2008-09-01

    Very high-power satellites for Telecom missions require 100V bus. Some Telecom payloads may be used in TDMA mode with a power modulation up to 30% of the Payload power. Full performance of the PCU is required in this case even in eclipse mode. It is clear that this requirement is very demanding especially for the BDR design.100V bus system leads making this requirement more difficult as Bus and Battery short-circuit protections have to operate under a voltage of 100V. This paper describes first the overall BDR design with a special focus on the innovative battery short-circuit protection that is not achieved by a "classical" series SSPC on the battery line.The constraints brought by the TDMA mode are detailed, especially on the input filter of the BDR in presence of large battery inductance. The solution developed to cope with large TDMA current is then presented with the associated TDMA performance.

  2. Parameters Matching and Performance Analysis of Power System on Pure Electric Bus%纯电动客车动力系统参数匹配及性能分析

    Institute of Scientific and Technical Information of China (English)

    王燕燕

    2011-01-01

    以纯电动客车为研究对象,对动力传动系统,主要对驱动电动机、变速器以及动力电池参数进行合理地计算和设计。为纯电动客车动力传动系统的初步选型提供依据。%Taking the pure electric bus as the study object, the parameters of driving motor, transmission and power battery are calculated and designed so as to provide the basis for lectotype of power transmission system on pure electric bus.

  3. Distributed cooperative synchronization strategy for multi-bus microgrids

    DEFF Research Database (Denmark)

    Sun, Yao; Zhong, Chaolu; Hou, Xiaochao;

    2017-01-01

    synchronization methods based on centralized communication are very costly and not suitable for multi-bus microgrids that have a large number of distributed generators (DGs). To address this concern, this study presents an active synchronization control strategy based on distributed cooperation technology...... for multi-bus microgrids. The proposed method can reconnect the microgrid in island to UG seamlessly with sparse communication channels. Synchronization correction signals are generated by a voltage controller, which are only transmitted to the leader DGs. Meanwhile, each DG exchanges information with its...

  4. Black silicon with black bus-bar strings

    DEFF Research Database (Denmark)

    Davidsen, Rasmus Schmidt; Tang, Peter Torben; Mizushima, Io;

    2016-01-01

    We present the combination of black silicon texturing and blackened bus-bar strings as a potential method for obtaining all-black solar panels, while using conventional, front-contacted solar cells. Black silicon was realized by mask-less reactive ion etching resulting in total, average reflectance...... below 0.5% across a 156x156 mm2 silicon wafer. Black bus-bars were realized by oxidized copper resulting in reflectance below 3% in the entire visible wavelength range. The combination of these two technologies may result in aesthetic, all-black panels based on conventional, front-contacted solar cells...

  5. Persecution as a Theme in Isaac Bashevis Singer's The Bus

    Institute of Scientific and Technical Information of China (English)

    Wu Minzhi

    2008-01-01

    Isaac Bashevis Singer is very much concerned about the fate of Jewish people,so he often presents Jews'sufferings in his literary works.The Bus,by means of describing the narrator's experiences during a bus tour through Spain,in different dimensions reinforces the destructive impact of persecution that Jews have gone through.Moreover,he implies such persecution is not merely confined between Jews and the Gentile,but also spreads among the whole human beings who hold differet beliefs.

  6. Improving student bus-riding behavior through a whole-school intervention.

    OpenAIRE

    Putnam, Robert F; Handler, Marcie W; Ramirez-Platt, Christina M; Luiselli, James K

    2003-01-01

    We describe a multicomponent intervention to improve bus-riding behavior of students attending an urban public school. The intervention was developed with technical assistance consultation that emphasized collaboration among students, school personnel, and bus drivers. The primary intervention procedures were identifying appropriate behaviors during transportation ("bus rules"), training bus drivers to deliver positive reinforcement, and rewarding student performance through a weekly school-b...

  7. Bus Catcher: A Context Sensitive Prototype System for Public Transportation Users

    OpenAIRE

    Bertolotto, Michela; O'Hare, G.M.P.; Strahan, Robin; Brophy, Ailish; Martin, A.; McLoughlin, Eoin

    2002-01-01

    In this paper we describe the architectural and functional characteristics of Bus Catcher, a context sensitive prototype system for public transportation users. Bus Catcher assists mobile users in planning their bus rides by providing timely and accurate information about current bus locations and estimated arrival times. A complete report on the implementation together with a preliminary evaluation of the system is provided in this paper.

  8. Performance evaluation of UHF RFID technologies for real-time bus recognition in the Taipei Bus Station.

    Science.gov (United States)

    Own, Chung-Ming; Lee, Da-Sheng; Wang, Ti-Ho; Wang, De-Jun; Ting, Yu-Lun

    2013-06-18

    Transport stations such as airports, ports, and railways have adopted blocked-type pathway management to process and control travel systems in a one-directional manner. However, this excludes highway transportation where large buses have great variability and mobility; thus, an instant influx of numerous buses increases risks and complicates station management. Focusing on Taipei Bus Station, this study employed RFID technology to develop a system platform integrated with modern information technology that has numerous characteristics. This modern information technology comprised the following systems: ultra-high frequency (UHF) radio-frequency identification (RFID), ultrasound and license number identification, and backstage graphic controls. In conclusion, the system enabled management, bus companies, and passengers to experience the national bus station's new generation technology, which provides diverse information and synchronization functions. Furthermore, this technology reached a new milestone in the energy-saving and efficiency-increasing performance of Taiwan's buses.

  9. MSCT findings in a controlled bus bombing using a pig model

    DEFF Research Database (Denmark)

    Hansen, Nikolaj Friis

    2009-01-01

    pig's position in the bus at the time of detonation. 1 of the pigs was rigged as a suicide bomber while the others were individually placed as passengers and bus driver inside the bus alongside dummies. Measurements of the blast force and fast speed video recordings were made during the detonation...

  10. 49 CFR 571.221 - Standard No. 221; School bus body joint strength.

    Science.gov (United States)

    2010-10-01

    ... means any part of the bus, of either a mechanical or electrical nature, which is explicitly identified... 49 Transportation 6 2010-10-01 2010-10-01 false Standard No. 221; School bus body joint strength... STANDARDS Federal Motor Vehicle Safety Standards § 571.221 Standard No. 221; School bus body joint...

  11. 46 CFR 112.05-3 - Main-emergency bus-tie.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Main-emergency bus-tie. 112.05-3 Section 112.05-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING EMERGENCY LIGHTING AND POWER SYSTEMS General § 112.05-3 Main-emergency bus-tie. Each bus-tie between a main...

  12. The Fuel Economy of Hybrid Buses: The Role of Ancillaries in Real Urban Driving

    Directory of Open Access Journals (Sweden)

    Francesco Bottiglione

    2014-07-01

    Full Text Available In the present context of the global economic crisis and environmental emergency, transport science is asked to find innovative solutions to turn traditional vehicles into fuel-saving and eco-friendly devices. In the last few years, hybrid vehicles have been shown to have potential benefits in this sense. In this paper, the fuel economy of series hybrid-electric and hybrid-mechanical buses is simulated in two real driving situations: cold and hot weather driving in the city of Taranto, in Southern Italy. The numerical analysis is carried out by an inverse dynamic approach, where the bus speed is given as a velocity pattern measured in the field tests performed on one of the city bus routes. The city of Taranto drive schedule is simulated in a typical tempered climate condition and with a hot temperature, when the air conditioning system must be switched on for passenger comfort. The fuel consumptions of hybrid-electric and hybrid-mechanical buses are compared to each other and with a traditional bus powered by a diesel engine. It is shown that the series hybrid-electric vehicle outperforms both the traditional and the mechanical hybrid vehicles in the cold weather driving simulation, reducing the fuel consumption by about 35% with respect to the traditional diesel bus. However, it is also shown that the performance of the hybrid-electric bus gets dramatically worse when the air-cooling system is continuously turned on. In this situation, the fuel consumption of the three different technologies for city buses under investigation is comparable.

  13. How to Cut Costs by Saving School Bus Fuel.

    Science.gov (United States)

    Seiff, Hank

    A program started in Washington County, Maryland in 1980 has been successful in saving school bus fuel and bringing down transportation costs incurred by its fleet of 200 buses. Driver training and motivation, as well as a partial transfer to diesel buses, are at the heart of the program. The drivers are taught five fuel saving techniques: cut…

  14. Bullying on the School Bus: A Video Analysis

    Science.gov (United States)

    Raskauskas, Juliana

    2005-01-01

    The purpose of this study was to assess the nature of bullying on the school bus. Videotapes were used to identify occurrences of bullying on buses of elementary school students. Incidents were reviewed for forms of bullying, fullness, presence of friends, and severity of acts. Results indicated that approximately two incidents occurred per bus…

  15. Bussikontsern Go Bus ihaldab Harjumaa turgu / Signe Kalberg

    Index Scriptorium Estoniae

    Kalberg, Signe, 1959-

    2005-01-01

    AS-i Tarbus ja kaheksa bussiettevõtte ühinemisel moodustati AS Go Bus, ettevõte plaanib veel mitme bussifirma liitmist. Atko Grupi juhatuse esimehe Margo Tomingase, AS Sebe nõukogu esimehe Hugo Osula arvamus. Lisa: Konkurentsiamet hoiab silma peal

  16. Overview of Multi-DC-Bus Solutions for DC Microgrids

    DEFF Research Database (Denmark)

    Ricchiuto, D.; Mastromauro, R.A.; Liserre, Marco;

    2013-01-01

    DC Microgrids have recently received a lot of attention in the last years due to high penetration of renewable energy sources as well as distributed energy storage systems. In the future DC microgrids could be preferable respect to AC microgrids in terms of redundancy since multi-DC-Bus solutions...

  17. What's Happening on the School Bus Performance Front?

    Science.gov (United States)

    Combs, Hanford L.

    The most urgent order of business in the national scene is to complete the development of a series of new performance tests for school bus bodies and chassis to establish a benchmark for safe construction that can be verified by independent testing agencies. Such performance tests should incorporate the new Federal Joint Strength Efficiency…

  18. High-Tech School Bus Teaches Students on the Road

    Science.gov (United States)

    Katims, Lauren

    2011-01-01

    Last year, kindergarten through high school students in the rural Hector, Arkansas, School District barely had the technology resources that keep kids interested in math and science. This year, they potentially have the most advanced resources in the country--before they even step into the classroom. One school bus in Arkansas' Pope County has…

  19. A Novel Time Synchronization Method for Dynamic Reconfigurable Bus

    Directory of Open Access Journals (Sweden)

    Zhang Weigong

    2016-01-01

    Full Text Available UM-BUS is a novel dynamically reconfigurable high-speed serial bus for embedded systems. It can achieve fault tolerance by detecting the channel status in real time and reconfigure dynamically at run-time. The bus supports direct interconnections between up to eight master nodes and multiple slave nodes. In order to solve the time synchronization problem among master nodes, this paper proposes a novel time synchronization method, which can meet the requirement of time precision in UM-BUS. In this proposed method, time is firstly broadcasted through time broadcast packets. Then, the transmission delay and time deviations via three handshakes during link self-checking and channel detection can be worked out referring to the IEEE 1588 protocol. Thereby, each node calibrates its own time according to the broadcasted time. The proposed method has been proved to meet the requirement of real-time time synchronization. The experimental results show that the synchronous precision can achieve a bias less than 20 ns.

  20. Platform Screen Doors Enhanced Bus Rapid Transit Intelligent Performance

    Directory of Open Access Journals (Sweden)

    Chonghua Zhou

    2011-06-01

    Full Text Available It is the last straw to clutch at to solve the urban traffic issue, to develop high-capacity rapid transit and promote transit priority. Characterized by low cost, short construction cycle and flexible development, Bus Rapid Transit (BRT has been favored by more and more cities in the world. The Platform Screen Doors (PSDs system is an important component at BRT stations, and it is original motive to be designed to satisfy the growing demand from BRT application to provide increased safety and comfort in the first. With the continual increased demand for BRT intelligent performance, the PSDs system is applied to get Bus Location Information with accurate position of arrival and departure at stop, to provide Real-Time Information (RTI for BRT passengers using PSDs/GPS compound location technology, to put into practice Bus Fleet Management (BFM. Considering the capability of accurate location, it can be applied to actualize Bus Sign Priority in the future. The authors are luck to take in part the practice of BRT system, especially in the BRT intelligent systems, the papers will introduce upwards application and conceive in detail.

  1. Measurements on and simulations of a biogas-fuelled bus

    International Nuclear Information System (INIS)

    Mathematical models for torque/fuel consumption and emissions have been studied for a biogas-fuelled bus used in urban traffic in Linkoeping, Sweden. It is noted that the cycle ECE R-49 is not representative for city buses, but that the Braunschweig cycle gives rather good agreement. 2 refs, 37 figs

  2. Measuring Bus Drivers' Occupational Stress Under Changing Working Conditions

    NARCIS (Netherlands)

    Hlotova, Y.; Cats, O.; Meijer, S.A.

    2014-01-01

    Stress is an immense problem in modern society; approximately half of all occupational illnesses are directly or indirectly related to stress. The work of a bus driver is typically associated with high stress levels that negatively influence individual well-being as well as workforce management. The

  3. GeoBus: sharing science research with schools

    Science.gov (United States)

    Roper, Kathryn; Robinson, Ruth; Moorhouse, Ben

    2016-04-01

    GeoBus (www.geobus.org.uk) is an educational outreach project that was developed in 2012 by the Department of Earth and Environmental Sciences at the University of St Andrews, and it is currently sponsored by industry, NERC, The Crown Estate, and the Scottish Government. The aims of GeoBus are to support the teaching of Earth Science in secondary (middle and high) schools by providing teaching support to schools that have little or no experience in teaching this subject. This is, in part, done through the sharing of new science research outcomes and the experiences of young researchers with school pupils to provide a bridge between industry, higher education institutions, research councils and schools. Since its launch, over 40,000 pupils will have been involved in experiential Earth science learning activities in 190 different schools (over 400 separate visits) across the length and breadth of Scotland: many of these schools are in remote and disadvantaged regions. A new GeoBus project is under development within the Department of Earth Sciences at UCL in London. A key aim of GeoBus is to incorporate new research into our workshops with the main challenge being the development of appropriate resources that incorporate the key learning aims and requirements of the science and geography curricula. GeoBus works closely with researchers, teachers and educational practitioners to tailor the research outcomes to the curricula as much as possible. Over the past four years, GeoBus has developed 17 workshops, 5 challenge events and extensive field trips and each of these activities are trialled and evaluated within the university, and adjustments are made before the activities are delivered in schools. Activities are continually reviewed and further developments are made in response to both teacher and pupil feedback. This critical reflection of the project's success and impact is important to insure a positive and significant contribution to the science learning in

  4. Real life testing of a Hybrid PEM Fuel Cell Bus

    Science.gov (United States)

    Folkesson, Anders; Andersson, Christian; Alvfors, Per; Alaküla, Mats; Overgaard, Lars

    Fuel cells produce low quantities of local emissions, if any, and are therefore one of the most promising alternatives to internal combustion engines as the main power source in future vehicles. It is likely that urban buses will be among the first commercial applications for fuel cells in vehicles. This is due to the fact that urban buses are highly visible for the public, they contribute significantly to air pollution in urban areas, they have small limitations in weight and volume and fuelling is handled via a centralised infrastructure. Results and experiences from real life measurements of energy flows in a Scania Hybrid PEM Fuel Cell Concept Bus are presented in this paper. The tests consist of measurements during several standard duty cycles. The efficiency of the fuel cell system and of the complete vehicle are presented and discussed. The net efficiency of the fuel cell system was approximately 40% and the fuel consumption of the concept bus is between 42 and 48% lower compared to a standard Scania bus. Energy recovery by regenerative braking saves up 28% energy. Bus subsystems such as the pneumatic system for door opening, suspension and brakes, the hydraulic power steering, the 24 V grid, the water pump and the cooling fans consume approximately 7% of the energy in the fuel input or 17% of the net power output from the fuel cell system. The bus was built by a number of companies in a project partly financed by the European Commission's Joule programme. The comprehensive testing is partly financed by the Swedish programme "Den Gröna Bilen" (The Green Car). A 50 kW el fuel cell system is the power source and a high voltage battery pack works as an energy buffer and power booster. The fuel, compressed hydrogen, is stored in two high-pressure stainless steel vessels mounted on the roof of the bus. The bus has a series hybrid electric driveline with wheel hub motors with a maximum power of 100 kW. Hybrid Fuel Cell Buses have a big potential, but there are

  5. Energy Performance Optimization of a Bus for Urban Public Transport

    Directory of Open Access Journals (Sweden)

    Paola Gori

    2013-08-01

    Full Text Available Nowadays many people use public transports in urban centres. Consequently, every day a lot of buses move within cities, trying to ensure the best service to citizens. During the year buses becomecrowded places and using an air conditioning system in constant operation, it tries to ensure a certain condition of comfort for the passengers on board. The aim of this study is to analyse and optimize the energy performance of a bus shell, identifying practical solutions that have not yet been adopted in order to reduce the impact of air conditioning on bus consumption and, therefore, on air pollution. For this reason it was decided to conduct a thermal analysis of a bus for public transport, in order to understandthe behaviour of the bus shell and to deduce possible optimization measures that have not yet been made until now. The analysis was carried out considering the hottest day of July and the coldest day ofJanuary, considering the conditions of operation based on the most common graphics TGM able to define the concentration of traffic city during the 24 hours per day. The study was done using the dynamicsimulation software TRNSYS. With this software it was possible to recreate faithfully the structure of the bus and the external environmental conditions, assessing the impact of different technical solutions for an improvement of internal conditions and a reduction of the cooling capacity required. Because the presence of passengers in public transport is considered like a “benefit” during the winter, the analysis started with the identification of a summer solution and the subsequent evaluation of this solution for the wintertime. The aim of this study was to optimize the bus shell and select the most appropriate solutions. Regarding the transparent surfaces it has been given importance to factors such as the thermal transmittance and the solar gain factor (g-value. Aware of the influence given by the solar radiation on the energy loads, we

  6. Distractions in Everyday Driving

    Science.gov (United States)

    ... while driving, which is one of the reasons distracted driving is such a big problem. Driver inattention is ... you’re doing any of these things while driving, you become distracted in ways that increase your risk of crashing. ...

  7. Bosch automotive electrics and automotive electronics systems and components, networking and hybrid drive

    CERN Document Server

    2014-01-01

    The significance of electrical and electronic systems has increased considerably in the last few years and this trend is set to continue. The characteristics feature of innovative systems is the fact that they can work together in a network. This requires powerful bus systems that the electronic control units can use to exchange information. Networking and the various bus systems used in motor vehicles are the prominent new topic in the 5th edition of the "Automotive Electric, Automotive Electronics" technical manual. The existing chapters have also been updated, so that this new edition brings the reader up to date on the subjects of electrical and electronic systems in the motor vehicle. Content Electrical and electronical systems – Basic principles of networking - Examples of networked vehicles – Bus systems – Architecture of electronic systems – Mechatronics – Elektronics – Electronic control Units – Software – Sensors – Actuators – Hybrid drives – Vehicle electrical system – Start...

  8. SunLine Transit Agency Advanced Technology Fuel Cell Bus Evaluation: First Results Report

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, L.; Chandler, K.

    2011-03-01

    This report describes operations at SunLine Transit Agency for their newest prototype fuel cell bus and five compressed natural gas (CNG) buses. In May 2010, SunLine began operating its sixth-generation hydrogen fueled bus, an Advanced Technology (AT) fuel cell bus that incorporates the latest design improvements to reduce weight and increase reliability and performance. The agency is collaborating with the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) to evaluate the bus in revenue service. This report provides the early data results and implementation experience of the AT fuel cell bus since it was placed in service.

  9. Implementation of an AMBA Advanced High Performance Bus protocol IP block

    OpenAIRE

    Mahendra Vucha Sandeep Magarde; Miss. Shruti Bhargava; Rishabh Singh Kurmi

    2011-01-01

    The design of an AMBA advanced high performance bus (AHB) protocol IP block is presented in this paper. The AHB (Advanced High-performance Bus) is a high-performance bus in AMBA (Advanced Microcontroller Bus Architecture) family. This AHB can be used in high clock frequency system modules. The AHB acts as the high-performance system backbone bus. AHB supports the efficient connection of processors, on-chip memories and off-chip external memory interfaces with low-power peripheral macro cell f...

  10. Two hot spots in China's bus market%中国客车市场呈现两大热点

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ According to an analysis on statistics of production and sales of China's 70 bus enterprises in 2005, bus sales are expected to continue to grow this year, posing a better performance than that in the previous year, and the urban public bus transport, rural bus transport and export together will be a major motive power for pulling up growth of the industry.

  11. Impact of work-related and psychosocial factors on the development of ischemic heart disease among urban bus drivers in Denmark

    DEFF Research Database (Denmark)

    Netterstrøm, Bo; Juel, K

    1988-01-01

    regression model for independent variables regarding psychosocial well-being and work conditions. High work load (driving in heavy traffic) was significantly associated with the occurrence of MI. Of the psychosocial factors "no social contact with colleagues" and "increased work pace" were also significantly......From 1978 to 1985, 2,465 male bus drivers in the three major cities in Denmark were followed with regard to hospital admission due to myocardial infarction (MI) and death due to ischemic heart disease (IHD). In all 2,045 (83%) of these men responded in 1978 to a questionnaire on psychosocial well-being...... and work conditions. The respondents did not differ from the nonrespondents regarding hospital admissions and death in the follow-up period (1978-1984). Sixty-two cases of MI were registered among the 2,045 bus drivers in 1978-1984. On this basis relative risk for MI was calculated with a multiple...

  12. Inertia Matching During Dynic Simulation of Vehicle Drive System on Test Bench

    Institute of Scientific and Technical Information of China (English)

    宋强; 孙逢春; 郑慕侨; 顾进超

    2004-01-01

    Frework and basic pareters of a test bench for motor drive system of electric vehicle (EV) are illuminated. Two kinds of electric drive models, one was for the electric vehicle drived on real road, the other was for that on test bench, are put forward. Then, dynic analysis of these models is made in detail. Inertia matching method of the test bench is researched and some useful formulas and graphs are brought forward. The experiment of an electric bus is introduced in order to explain the usage of this inertia matching method.

  13. Intelligent bus terminal design based on GPS and 3G%基于GPS和3G的智能公交终端设计

    Institute of Scientific and Technical Information of China (English)

    沙金竹; 李欣; 李殿君

    2012-01-01

    针对城市公交普遍存在行车安全和乘客乘车难问题,提出了一种基于GPS/3G技术的公交车远程监控系统设计方案。本方案采用ARM微处理器和嵌入式Linux操作系统,利用数字图像处理和GPS定位技术,实现了对公交车车内视频监控、行车状态统计管理、定位信息采集等功能,同时以3G无线通信为传输手段,实现监控终端与控制中心通信,提高公交运行安全及服务质量,使市民能更好地乘坐公交,享受生活。%In view of the widespread city bus driving safety and passenger bus trouble,a bus remote monitor and control system design based on 3 G/GPS technology is proposed. The scheme adopts ARM micro processor and embedded Linux operating system, using digital image processing and GPS technology, thus realizes function including the car video monitoring, driving statistical management, positioning information collection and so on. While using 3G wireless communication as transmission method, it realizes communication between monitoring terminal and the control center, and improves public transport safety and service quality, so that citizens can have a better time on bus, and enjoy their life.

  14. Extended Driving Impairs Nocturnal Driving Performances

    OpenAIRE

    Patricia Sagaspe; Jacques Taillard; Torbjorn Akerstedt; Virginie Bayon; Stéphane Espié; Guillaume Chaumet; Bernard Bioulac; Pierre Philip

    2008-01-01

    Though fatigue and sleepiness at the wheel are well-known risk factors for traffic accidents, many drivers combine extended driving and sleep deprivation. Fatigue-related accidents occur mainly at night but there is no experimental data available to determine if the duration of prior driving affects driving performance at night. Participants drove in 3 nocturnal driving sessions (3-5 am, 1-5 am and 9 pm-5 am) on open highway. Fourteen young healthy men (mean age [+/-SD] = 23.4 [+/-1.7] years)...

  15. HARMONIC DRIVE SELECTION

    Directory of Open Access Journals (Sweden)

    Piotr FOLĘGA

    2014-03-01

    Full Text Available The variety of types and sizes currently in production harmonic drive is a problem in their rational choice. Properly selected harmonic drive must meet certain requirements during operation, and achieve the anticipated service life. The paper discusses the problems associated with the selection of the harmonic drive. It also presents the algorithm correct choice of harmonic drive. The main objective of this study was to develop a computer program that allows the correct choice of harmonic drive by developed algorithm.

  16. Reading Text While Driving

    OpenAIRE

    Liang, Yulan; Horrey, William J.; Hoffman, Joshua D.

    2015-01-01

    Objective In this study, we investigated how drivers adapt secondary-task initiation and time-sharing behavior when faced with fluctuating driving demands. Background Reading text while driving is particularly detrimental; however, in real-world driving, drivers actively decide when to perform the task. Method In a test track experiment, participants were free to decide when to read messages while driving along a straight road consisting of an area with increased driving demands (demand zone)...

  17. StarBus+: Distributed Object Middleware Practice for Internet Computing

    Institute of Scientific and Technical Information of China (English)

    Huai-Min Wang; Yu-Feng Wang; Yang-Bin Tang

    2005-01-01

    In the past decade, the booming of Internet challenges the middleware in three aspects: quality of service,balance of changes and stabilization, and across-Internet integration. This paper presents our work on distributed object computing middleware technology for these challenges, as well as the research and development on StarBus+, which is a CORBA standard-compliant middleware suite with the features such as object request broker supporting multi-* quality of service, component model, and integration with Web Service. This paper comprehensively presents the design and characteristics of StarBns+, and demonstrates how StarBus+ is enhanced to address the challenges of Internet computing through three case studies: inter-enterprise integration over Internet, application evolution through dynamic reconfiguration,and great massive information system building. The paper also suggests some research directions which are important for Internet computing.

  18. Bus Encoder for Crosstalk Avoidance in RLC Modeled Interconnects

    Directory of Open Access Journals (Sweden)

    G. Nagendra Babu

    2012-02-01

    Full Text Available Most of the encoding methods proposed in recent years have dealt with only RC modeled VLSI interconnects. For deep sub micron technologies (DSM, on-chip inductive effects have increased due to faster clock speeds, smaller signal rise times and longer length of on-chip interconnects. All these issues raise the concern for cross talk, propagation delay and power dissipation of overall. Therefore, this research work introduces an efficient Bus Encoder using Bus Inverting (BI method. The proposed design dramatically reduces both cross talk and power dissipation in RLC modeled interconnects which makes it suitable for current high-speed low-power VLSI interconnects. The proposed model demonstrates an overall reduction of power dissipation and cross talk induced delay by 55.43% and 45.87%, respectively.

  19. Implementation of I 2C Master Bus Protocol on FPGA

    Directory of Open Access Journals (Sweden)

    Regu Archana

    2014-10-01

    Full Text Available The focus of this paper is on I 2C (Inter-Integrated Circuit protocol interface between Master Bus protocol and slave. Here we are interfacing between micro-controller and DS1307. I 2C bus protocol sends 8 bit data from micro-controller to DS1307. This module was designed in VHDL and simulated and synthesized using Xilinx ISE Design Suite 14.2. I 2C and optimized for area and power. This concept is widely applicable from any high speed device or low speed device to any low speed device or high speed device. This module acts as a slave for the DS1307 at the same time acts like a master for the micro-controller device which can be considered as a slave. . It can be used to interface low speed peripherals like motherboard, embedded system, mobile phones, set top boxes, DVD, PDA’s or other electronic devices.

  20. Hardware Engines for Bus Encryption: A Survey of Existing Techniques

    CERN Document Server

    Elbaz, R; Sassatelli, G; Guillemin, P; Anguille, C; Bardouillet, M; Buatois, C; Rigaud, J B

    2011-01-01

    The widening spectrum of applications and services provided by portable and embedded devices bring a new dimension of concerns in security. Most of those embedded systems (pay-TV, PDAs, mobile phones, etc...) make use of external memory. As a result, the main problem is that data and instructions are constantly exchanged between memory (RAM) and CPU in clear form on the bus. This memory may contain confidential data like commercial software or private contents, which either the end-user or the content provider is willing to protect. The goal of this paper is to clearly describe the problem of processor-memory bus communications in this regard and the existing techniques applied to secure the communication channel through encryption - Performance overheads implied by those solutions will be extensively discussed in this paper.

  1. Environmental assessment of 9 European public bus transportation systems

    DEFF Research Database (Denmark)

    Nanaki, Eva; Koroneos, Christophis; Roset, Jaume;

    2017-01-01

    that affect the production of carbon dioxide (CO2) as well as of air pollutants, in 9 major European cities, aiming to provide a comprehensive overview of the actual knowledge on the atmospheric pollution from public transportation systems. CO2 emissions as well as air pollutants, such as CO, HC, PM, NOx......The transportation sector is one of the largest sources of EU’s greenhouse gas emissions. In 2011, transportation represented approximately 25 percent of total EU’s greenhouse gas emissions. Urban mobility accounts for 40% of all CO2 emissions of road transport and up to 70% of other pollutants...... are calculated for the diesel and CNG bus fleets of the European cities under study. Finally the environmental benefits, in terms of CO2 and CO, HC, PM, NOx emissions reductions, from the penetration of different biodiesel blends (from B10 to B100) to the bus fleets are estimated....

  2. THE DESIGN OF VMEBUS BRIDGE CONTROLLER WITH SHARC BUS

    Institute of Scientific and Technical Information of China (English)

    Wang Min; Wu Shunjun; Su Tao

    2005-01-01

    Targeting at the high expense and inflexibility to realize VMEbus bridge controller by professional Integrated Circuit (IC), this paper presents a scheme of adopting CPLD/FPGA (Complicated Programmable Logic Device/Field Programmable Gate Array) to design bridge controller between VMEbus and local bus. SHARC DSP (Digital Signal Processor) bus is an example. It has functions of nearly entire master/slave interface of VMEbus, and can act as DMA (Direct Memory Access) controller and perform block transfer in DMA or master processor initiative way without length limit. External circuit of the design is very simple. In comparison with special ICs, it has high performance to price ratio and can be easily applied to local buses of other processors with quite a little modification.

  3. Technology Update of a Control System Trough Corba Bus

    CERN Document Server

    Bertocchi, A; Buceti, G; Centioli, C; Muzio, D D; Iannone, F; Mazza, G; Panella, M; Vitale, V

    2001-01-01

    After more than 10 years of activity, FTU (Frascati Tokamak Upgrade) has to face the problem of taking advantage of the new hardware and software technology saving all the investments yet done. So, for example, the 20 years old Westinghouse PLCs (communicating only through a serial line) have to be leaved in operation while a web-based tool has to be released for plan monitoring purpose. CORBA bus has been demonstrated to be the answer to set up the communication between old and new hardware and software blocks. On FTU the control system is based on Basestar, a Digital/Compaq software suite. We will describe how the real time database of Basestar is now accessed by Java graphic tools, LabView and, in principle, any package accepting external routines. An account will be also done in the data acquisition area where a Camac serial highway driver has been integrated in the new architecture still through the CORBA bus

  4. Heat storage for a bus petrol internal-combustion engine

    Science.gov (United States)

    Vasiliev, Leonard L.; Burak, Victor S.; Kulakov, Andry G.; Mishkinis, Donatas A.; Bohan, Pavel V.

    The heat storage (HS) system for pre-heating a bus petrol internal combustion engine to starting was mathematically modelled and experimentally investigated. The development of such devices is an extremely urgent problem especially for regions with a cold climate. We discuss how HS works on the effect of absorption and rejection of heat energy at a solid-liquid phase change of a HS substance. In the first part of the paper a numerical method to calculate the HS mass-dimensional parameters and their characteristics are described. In the experimental part of the paper results are given of experiments on the pre-heating device aiding to start a carburettor engine under operational conditions and analysis of data received. Practical confirmation of the theoretical development of HS devices for a bus engine for starting by pre-heating is given.

  5. Investigation on full distribution CNC system based on SERCOS bus

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    A full distribution CNC system based on SERCOS bus is studied in accordance with the limitations of traditional PC-based motion card.The conventional PC-based motion control card is dispersed into several autonomous intelligent servo-control units with the function of servo driver.The autonomous intelligent servocontrol units realize the loop control of position,velocity and current.Interpolation computation is completed in PC and the computational results are transferred to every autonomous intelligent servo-control unit by high speed SERCOS bus.Software or hardware synchronization technology is used to ensure all servomotors are successive and synchronously running.The communication and synchronization technology of SERCOS are also researched and the autonomous intelligent servo-control card is developed byself.Finally,the experiment of circle contour process on a prototype system proves the feasibility.

  6. An Optimization Model for the Selection of Bus-Only Lanes in a City.

    Directory of Open Access Journals (Sweden)

    Qun Chen

    Full Text Available The planning of urban bus-only lane networks is an important measure to improve bus service and bus priority. To determine the effective arrangement of bus-only lanes, a bi-level programming model for urban bus lane layout is developed in this study that considers accessibility and budget constraints. The goal of the upper-level model is to minimize the total travel time, and the lower-level model is a capacity-constrained traffic assignment model that describes the passenger flow assignment on bus lines, in which the priority sequence of the transfer times is reflected in the passengers' route-choice behaviors. Using the proposed bi-level programming model, optimal bus lines are selected from a set of candidate bus lines; thus, the corresponding bus lane network on which the selected bus lines run is determined. The solution method using a genetic algorithm in the bi-level programming model is developed, and two numerical examples are investigated to demonstrate the efficacy of the proposed model.

  7. Capacity models on expressway near a bus bay stop with an access

    Institute of Scientific and Technical Information of China (English)

    张洪宾; 孙小端; 贺玉龙; 宇仁德

    2015-01-01

    To determinate the expressway capacity near a bus bay stop with an access, capacity models on the expressway near a bus stop with an access were developed on the basis of gap acceptance theory and queuing theory. Depending on a bus stop position to an entrance or an exit ramp, the capacity models were developed for four cases. Bus bay stops with overflow and bus bay stops without overflow were considered. A comparison of simulation experiment and model calculation was carried out. Results show that the suggested models have high accuracy and reliability, at bus arrival rate below 60 vehicles per hour (veh/h) or vehicle volumes at the entrance and the exit below 200 passenger cars units per hour (pcu/h), and there are no significant difference in the capacities for four cases. When bus arrival rate is above 240 veh/h, the capacities of all four cases will decline rapidly. With berth number increasing, the increasing of the capacities is no obvious for four cases. As the bus arrival rate and vehicle volumes at the entrance and the exit increase, bus stops located downstream of an entrance and upstream of an exit have a remarkably effect on the capacities. The latter case is much heavier than the former. Those results can be used to traffic design and optimization on urban expressway near a bus stop with an access.

  8. BUS BAY PERFORMANCE AND ITS INFLUENCE ON THE CAPACITY OF ROAD NETWORK IN DAR ES SALAAM

    Directory of Open Access Journals (Sweden)

    Nurdin K. Mushule

    2012-01-01

    Full Text Available One of major problems facing motorists in Dar es Salaam city today is congestion. Bus bays have a significant influence on the capacity of a roadway because they interfere with passing vehicles primarily when buses maneuver to pull into and out of bus bays. Bus bay stops will also interfere with vehicles movement if bus demand exceeds the bus bay capacity resulting in some buses waiting in the travel lane until the buses occupying the bay exit the bay. This paper presents the results of a study which was carried out to evaluate the bus bay performance and its influence on the capacity of the roadway network in the city of Dar es Salaam. The case study area covered 11 bus stops along Morogoro road from Ubungo to Magomeni Mapipa. Capacity of bus bays was studied using procedure outlined in the Transit Capacity and Quality of Service Manual of 2003. This enabled the researcher to determine parameters such as dwell times and clearance times which are major determinants of bus stop capacity. The results indicate that only 18% of the bus bay stops studied did not have adequate capacity to cater for the available demand. 9% did not have adequate capacity during peak hours but the capacity was adequate during off-peak hours. The remaining 73% of bus bay stops possess adequate capacity all the time. Although most bus bay stops studied possess adequate capacity, severe congestion was observed at these locations. This is due to erratic behavior of bus drivers who do not utilize the provided space for them to drop off and pick up passengers. Clearly, this is an area that requires more strict enforcement in order to ease the congestion problem in the city by operating the existing capacity more efficiently."

  9. System investigation H2 bus fleet (technology, regulations, future development)

    International Nuclear Information System (INIS)

    In cooperation with Ansaldo Ricerche, ICIL have compiled a technical catalogue, providing the impartial descriptions, both of existing technology and regulations, and the likely future developments of these, as to remedy the first problem faced by a potential hydrogen bus fleet operator viz the absence of an impartial description of the available vehicle and fuels systems together with the absence of a description of regulatory and safety factors which need consideration. (orig.)

  10. Market brief : the alternative fuels bus market in India

    International Nuclear Information System (INIS)

    In 2003, alternative fuel bus technologies in India were valued at approximately $1.5 billion. There are an estimated 600,000 buses in India, of which 21 per cent are owned by public transit. Bus production is currently 33,000 per year and increasing at 4 per cent annually. The main alternative fuel bus technologies include fuel cells, compressed natural gas (CNG) and liquefied petroleum gas (LPG). Since urban centres in India are among the most polluted in the world, demand for these technologies is strong. India is ranked fifth in the world in terms of vehicles converted to natural gas. In 2003, New Delhi switched from diesel to CNG fuel for buses but has faced challenges because there is no well-developed underground distribution system and refilling times are long due to weak pressure at fueling stations. India's new $28 million fuel cell bus development project aims to place 8 fuel cell powered buses with the Delhi Transport Corporation. This market brief describes the potential for Canadian suppliers to enter into joint ventures to establish local production facilities and transfer technology expertise. It describes the key factors shaping market growth with particular reference to sector reform, and opportunities with actual and planned projects. The competitive environment was also discussed with reference to local capabilities, international competition, Canadian position, and a competitive advantage through Canadian government policies and initiatives. A section of the report on public-sector customers listed the companies that buy alternative fuel buses in India. Considerations for market-entry in India were also outlined

  11. Modelling urban bus transport emissions in Santiago de Cuba

    OpenAIRE

    Warren, James; Avila, Jordi Mirabent

    2010-01-01

    This study described and focuses on the public transport bus system in Santiago de Cuba. Specifically we explore the fuel consumption of the various diesel buses over a three year period from 2007 to 2009 and with a forecast for the forthcoming years. The study considers the potential for fuel savings through a variety of methods which are each described and then modelled. Pollution is also calculated for a variety of scenarios and some suggestions are made in order to lower the overall...

  12. Virtual Instrument Based on GPIB Interface Bus1

    Institute of Scientific and Technical Information of China (English)

    Xiao,Ying; Qi,Hanhong

    2004-01-01

    In this paper, we introduced the technique of GPIB businterface. Through the controlling of the GPIB interface board,the computer controlled the current source and the voltmeter, both of which have GPIB bus interface, and a virtual instrument testing system for I~V curve was composed. The virtual instrument front panel and the background graphical control program in Labview environment accomplish virtual instrument testing task along with the hardware system.

  13. Damping torque analysis for DC bus implemented damping control

    OpenAIRE

    W. Du; WANG, HAIFENG; Ju, P.; Dunn, R

    2010-01-01

    Damping torque analysis is a well-developed technique for understanding and studying power system oscillations. This paper presents the applications of damping torque analysis for DC bus implemented damping control in power transmission networks in two examples. The first example is the investigation of damping effect of shunt VSC (Voltage Source Converter) based FACTS voltage control, i.e., STATCOM (Static Synchronous Compensator) voltage control. It is shown in the paper that STATCOM voltag...

  14. An asynchronous controller for a daisychainable vme bus interrupter

    OpenAIRE

    Wollowski, Ralf; Beister, Jochen; Kuhn, Matthias

    1999-01-01

    An interrupter for use in a daisy-chained VME bus interrupt system has beendesigned and implemented as an asynchronous sequential circuit. The concur-rency of the processes posed a design problem that was solved by means of asystematic design procedure that uses Petri nets for specifying system and in-terrupter behaviour, and for deriving a primitive flow table. Classical designand additional measures to cope with non-fundamental mode operation yieldeda coded state-machine representation. Thi...

  15. An Electric Bus with a Battery Exchange System

    OpenAIRE

    Jeongyong Kim; Inho Song; Woongchul Choi

    2015-01-01

    As part of the ongoing effort to be independent of petroleum resources and to be free from pollutant emission issues, various electric vehicles have been developed and tested through their integration with real world systems. In the current paper, yet another application specific EV for public transportation, an electric bus, is introduced and explained with results from the pilot test program which was carried out under real traffic conditions. The main feature of the current system is a bat...

  16. FAKTOR PENYEBAB KERUSAKAN SISTEM MESIN PADA BUS APTB PPD

    OpenAIRE

    Laela Chairani; Yulita Veranda Usman; Nur Yulianti Hidayah

    2015-01-01

    Comfort and safety of public transportation, particularly APTB PPD buses, becomes high expectations for its customers. Those expectations must be supported by the application of a good engine maintenance system. By using the method of Reliability Centered Maintenance may be determined appropriate actions to mitigate damage. From the analysis known the failures of the APTB PPD bus are malfunctions of the fuel engine, power transfer systems, difficulty to move the gear lever, and lubricating sy...

  17. BC Transit Fuel Cell Bus Project: Evaluation Results Report

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, L.; Post, M.

    2014-02-01

    This report evaluates a fuel cell electric bus demonstration led by British Columbia Transit (BC Transit) in Whistler, Canada. BC Transit is collaborating with the California Air Resources Board and the U.S. Department of Energy's National Renewable Energy Laboratory to evaluate the buses in revenue service. This evaluation report covers two years of revenue service data on the buses from April 2011 through March 2013.

  18. Effect of Educational Program to Decrease Substance Abuse among Suburban Bus Drivers Based on Theory of Planned Behavior

    Directory of Open Access Journals (Sweden)

    B. Moeini

    2015-01-01

    Full Text Available Introduction & Objective: Driving under the influence of drugs is considered a social pathology that has adverse effects on a society. This study aimed to investigate the effect of substance abuse educational program among the bus drivers on the basis of the theory of planned be-havior. Materials & Methods: This quasi-experimental study was conducted on 80 suburban bus drivers working at Hamadan transportation terminal. The bus drivers were randomly divided in two equal groups (intervention and control. Intervention program design was implemented after diagnostic evaluation. The effect of educational intervention on behavior was assessed two months after the last training session. SPSS -16 was employed for data analysis. Results: After the educational intervention, the average rates of the constructs of the theory of planned behavior in the intervention group significantly increased but these changes were not significant in the control group: attitude (t=9.53, P=0.000, subjective Norms (t=9.59, P=0.000, perceived behavioral control (t=-4.14, P =0.000. Also, behavioral intention to substance abuse avoidance and current behavior for substance abuse significantly decreased in the intervention group as compared to the control group (P<0.05. Behavioral intention and current behavior in the intervention group subsided from 15 and 12 people before the educational intervention to 3 and 0 people at the end of the educational program, respec-tively. Conclusion: The results showed that using the theory of planned behavior along with the train-ing skills strategies to resist drug abuse has a significant impact to create a psychiatric immu-nization and substance refusal in drivers. (Sci J Hamadan Univ Med Sci 2015; 21 (4:330-340

  19. Evaluation of Bus Vibration Comfort Based on Passenger Crowdsourcing Mode

    Directory of Open Access Journals (Sweden)

    Hong Zhao

    2016-01-01

    Full Text Available Vibration comfort is an important factor affecting the quality of service (QoS of bus. In order to make people involved in supervising bus’s vibration comfort and improve passengers’ riding experience, a novel mode of passenger crowdsourcing is introduced. In this paper, comfort degree of bus vibration is calculated from bus’s vibration signals collected by passengers’ smartphones and sent through WiFi to the Boa web server which shows the vibration comfort on the LCD deployed in bus and maybe trigger alarm lamp when the vibration is beyond the threshold. Three challenges here have been overcome: firstly, space coordinate transformation algorithm is used to solve the constant drift of signals collected; secondly, a low-pass filter is designed to isolate gravity from signals real-timely via limited computing resources; thirdly, an embedded evaluation system is developed according to the calculation procedure specified by criterion ISO 2631-1997. Meanwhile, the model proposed is tested in a practical running environment, the vibration data in whole travel are recorded and analyzed offline. The results show that comfort degree of vibration obtained from the experimental system is identical with the truth, and this mode is proved to be effective.

  20. The AI Bus architecture for distributed knowledge-based systems

    Science.gov (United States)

    Schultz, Roger D.; Stobie, Iain

    1991-01-01

    The AI Bus architecture is layered, distributed object oriented framework developed to support the requirements of advanced technology programs for an order of magnitude improvement in software costs. The consequent need for highly autonomous computer systems, adaptable to new technology advances over a long lifespan, led to the design of an open architecture and toolbox for building large scale, robust, production quality systems. The AI Bus accommodates a mix of knowledge based and conventional components, running on heterogeneous, distributed real world and testbed environment. The concepts and design is described of the AI Bus architecture and its current implementation status as a Unix C++ library or reusable objects. Each high level semiautonomous agent process consists of a number of knowledge sources together with interagent communication mechanisms based on shared blackboards and message passing acquaintances. Standard interfaces and protocols are followed for combining and validating subsystems. Dynamic probes or demons provide an event driven means for providing active objects with shared access to resources, and each other, while not violating their security.

  1. Safety evaluation of a hydrogen fueled transit bus

    Energy Technology Data Exchange (ETDEWEB)

    Coutts, D.A.; Thomas, J.K.; Hovis, G.L.; Wu, T.T. [Westinghouse Savannah River Co., Aiken, SC (United States)

    1997-12-31

    Hydrogen fueled vehicle demonstration projects must satisfy management and regulator safety expectations. This is often accomplished using hazard and safety analyses. Such an analysis has been completed to evaluate the safety of the H2Fuel bus to be operated in Augusta, Georgia. The evaluation methods and criteria used reflect the Department of Energy`s graded approach for qualifying and documenting nuclear and chemical facility safety. The work focused on the storage and distribution of hydrogen as the bus motor fuel with emphases on the technical and operational aspects of using metal hydride beds to store hydrogen. The safety evaluation demonstrated that the operation of the H2Fuel bus represents a moderate risk. This is the same risk level determined for operation of conventionally powered transit buses in the United States. By the same criteria, private passenger automobile travel in the United States is considered a high risk. The evaluation also identified several design and operational modifications that resulted in improved safety, operability, and reliability. The hazard assessment methodology used in this project has widespread applicability to other innovative operations and systems, and the techniques can serve as a template for other similar projects.

  2. Perspective Application of Passive Optical Network with Optimized Bus Topology

    Directory of Open Access Journals (Sweden)

    P. Lafata

    2012-06-01

    Full Text Available Passive optical networks (PONs represent a promising solution for modern access telecommunication networks.These networks are able to meet the increasing demands on transmission rate for demanding multimedia services,while they can offer typical shared transmission speed of 1.25 or 2.5 Gbps. The major role in deploying opticaldistribution networks ODNs plays the maximum attenuable loss, which is caused mainly by passive optical splitters.This paper proposes an innovative application of passive optical networks with optimized bus topology especially forlocal backbone data networks. Due to using only passive components, it is necessary to optimize certain parameters,especially an overall attenuation balance. Considering the possibility of such optimization, the passive optical networkwith optimized bus topology provides several interesting opportunities for specific applications. This paper will presentselected aspects of passive optical networks and splitters with asymmetric splitting ratio. The essential part is focusedon the practical demonstration of their use to optimize the passive optical network with bus topology, which acts as alocal backbone network for structured cabling systems, and for local data networks in large buildings.

  3. Designing Parallel Bus Using Universal Asynchronous Receiver Transmitter

    Directory of Open Access Journals (Sweden)

    Satyandra Sharad

    2013-04-01

    Full Text Available This paper entitled “DESIGNING PARALLEL BUSUSING UNIVERSAL ASYNCHRONOUS RECEIVER TRANSMITTER” is designed to the core of a UART interface module, which includes both receive and transmit modules, and the command parser. This paper will be a viable solution to design parallel buses with the help of UART. In the test bench , there is a RFM(register file model to which we write/read back data from just to check our design .The txt file issues serial inputs to the core and the core outputs parallel data and address in the form of bus. This bus is connected to our RFM (register file model instantiated in the test bench along with the design. This makes easy to retrieve parallel data from serial input. The base of the paper is to use microcontroller along with other components to interface with the physical world. In contrast, most serial communication must first be converted back into parallel form by a universal asynchronous receiver/transmitter (UART before they may be directly connected to a data bus. Both Transmissions (Parallel and Serial are used to connect peripheral devices and enable us to communicate with these devices. The UART core described here is designed using VHDL and implemented on Xilinx Vertex FPGA.

  4. An Electric Bus with a Battery Exchange System

    Directory of Open Access Journals (Sweden)

    Jeongyong Kim

    2015-07-01

    Full Text Available As part of the ongoing effort to be independent of petroleum resources and to be free from pollutant emission issues, various electric vehicles have been developed and tested through their integration with real world systems. In the current paper, yet another application specific EV for public transportation, an electric bus, is introduced and explained with results from the pilot test program which was carried out under real traffic conditions. The main feature of the current system is a battery exchanging mechanism mounted on the roof of the bus. The current configuration certainly requires an externally fabricated battery exchanging robot system that would complement the electric bus for a fully automated battery exchanging process. The major advantage of the current system is the quick re-charging of the electric energy through the physical battery exchange and the possible utilization of the battery exchange station as a mini scale energy storage system for grid system peak power shaving. With the total system solution approach for the public transportation system, it is fully expected to create outstanding business opportunities in number of areas such as battery suppliers, battery exchanging station management, battery leasing and many more.

  5. Ring Bus Architecture for a Solid-State Recorder

    Science.gov (United States)

    Walker, W. John; Kopf, Edward; Cox, Brian

    2008-01-01

    A document concisely describes a ring bus architecture for a proposed solid-state recorder (SSR) that would serve as buffer of data to be transmitted from a spacecraft to Earth. This architecture would afford fault tolerance needed for reliable operation in an anticipated high-radiation environment in which traditional SSRs cannot operate reliably. Features of the architecture include one or more controller boards and multiple memory boards interconnected in a ringlike topology. The interconnections would be high-speed serial links complying with the Institute of Electrical and Electronics Engineers (IEEE) standard 1393 (which pertains to a spaceborne fiber-optic data bus). Accordingly, each controller and memory board would be equipped with an IEEE-1393-compliant ring-bus-interface unit. The ringlike topology and the multiplicity of memory boards (and, optionally, of controller boards) would afford the redundancy needed for fault tolerance. Each board would be a fault-containment region. The IEEE 1393 links could be routed so that the SSR would continue to function even in the event of multiple failures. This architecture would also support scalability over a wide range. In a fully redundant configuration, it could accommodate between 1 and 125 memory boards.

  6. The Data Acquisition System Based on PMC Bus

    CERN Document Server

    Igarashi, Y; Higuchi, T; Ikeno, M; Inoue, E; Itoh, R; Kodama, H; Murakami, T; Nagasaka, Y; Nakao, M; Nakayoshi, K; Saitoh, M; Shimazaki, S; Suzuki, S Y; Tanaka, M; Tauchi, K; Varner, G; Yamauchi, M; Yasu, Y; Katayama, T; Watanabe, K; Ishizuka, M; Onozawa, S

    2003-01-01

    High energy physics experiments in KEK/Japan rush into over KHz trigger stage. Thus, we need a successor of the data acquisition(DAQ) system that replaces the CAMAC or FASTBUS systems. To meet these needs, we have developed a DAQ system which includes a crate, base-board modules, daughter cards for front-end A/D or T/D conversion, and back-end communication cards for data transfer and timing control. The size of the crate is for the 9U Euro-cards with the standard VME32 bus and extension connectors for power supply. The base-board comprises of a local bus with the sequencer connected to the front-end daughter cards via event buffering FIFOs, and the standard PMC (PCI mezzanine card) bus to be set a PMC processor unit to reduce data size from the front-end daughter cards. A data transfer module, which is connected to the event building system, and a trigger control unit, which communicates with the central timing controller are installed on the back-end communication card connected to the rear end of the base-...

  7. Life cycle cost analysis of a car, a city bus and an intercity bus powertrain for year 2005 and 2020

    International Nuclear Information System (INIS)

    The international economy, in the beginning of the 20th century, is characterized by uncertainty about the supply and the price of oil. Together with the fast decrease of electrical propulsion component prices, it becomes more and more cost effective to develop vehicles with alternative powertrains. This paper focuses on two questions: Are alternative powertrains especially cost effective for specific applications?; How does an increased fossil fuel price influences the choose of powertrain? To assess these questions, a computer tool named THEPS, developed in a Ph.D. project, is used. Three applications and three scenarios are analysed. The applications, a car, a city bus and an intercity bus, are vehicles all assumed to operate in Sweden. One scenario represents year 2005, the other two year 2020. The two future scenarios are characterized by different fossil fuel prices. The study, presented in the paper, indicates that alternative powertrains can be competitive from a cost perspective, in some applications, already in year 2005. It is for example cost effective to equip a city bus, running in countries with a high fuel price, with a hybrid powertrain. The study also indicates that pure electric, hybrid and/or fuel cell cars will probably be a more cost effective choice than conventional cars in year 2020. Another indication is that it will not be clear which powertrain concept to choose. The reason is that many cost effective powertrain concepts will be offered. The best choice will depend on the application

  8. Bitmap-Wise Wireless M-Bus Coordination for Sustainable Real Time Energy Management

    Directory of Open Access Journals (Sweden)

    Kwang-il Hwang

    2014-07-01

    Full Text Available Even though WM-Bus is being considered to be the most promising network protocol for smart metering, it is not suitable for a sustainable real-time home energy management system (HEMS, which requires higher reliability and longer lifetime despite real time bi-directional communications. Therefore, in this paper we propose a Bitmap-wise WM-Bus (BWM-Bus, coping well with sustainable real-time HEMS. In particular, the proposed scheme addresses the several problems in WM-Bus for HEMS by introducing novel functions: asynchronous meter trigger, adaptive slot scheduling, and bitmap-wise retransmission request. Through experiments, we demonstrate that BWM-Bus guarantees higher data success ratio with lower data aggregation time, as well as longer lifetime than WM-Bus standard.

  9. Identification of voltage stability condition of a power system using measurements of bus variables

    Directory of Open Access Journals (Sweden)

    Durlav Hazarika

    2014-12-01

    Full Text Available Several online methods were proposed for investigating the voltage stability condition of an interconnected power system using the measurements of voltage and current phasors at a bus. For this purpose, phasor measurement units (PMUs are used. A PMU is a device which measures the electrical waves on an electrical network, using a common time source (reference bus for synchronisation. This study proposes a method for online monitoring of voltage stability condition of a power system using measurements of bus variables namely – (i real power, (ii reactive power and (iii bus voltage magnitude at a bus. The measurements of real power, reactive power and bus voltage magnitude could be extracted/captured from a smart energy meter. The financial involvement for implementation of the proposed method would significantly lower compared with the PMU-based method.

  10. Design and VHDL simulation of a special high speed spaceborne bus controller

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    The application of high speed data bus on the satellites having several remote sensors could not only satisfy the demand of high speed data transfer,but also could reuse the equipment at both the com-ponent and subsystem levels for other space missions,thus reducing the costs of on-board processing system integration.In this article,a special high speed data bus with simple interfaces is chosen for transferring the data produced by remote sensors and other instrumentations.First,the function and the structure of the data bus are discussed carefully.And then,the bus controller,which is a key mod-ule of the data bus,is designed.At last,the function and performance of the bus controller are verified by VHDL simulation.

  11. SunLine Transit Agency Advanced Technology Fuel Cell Bus Evaluation: Third Results Reports

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, L.; Chandler, K.

    2012-05-01

    This report describes operations at SunLine Transit Agency for their newest prototype fuel cell bus and five compressed natural gas (CNG) buses. In May 2010, SunLine began operating its sixth-generation hydrogen fueled bus, an Advanced Technology (AT) fuel cell bus that incorporates the latest design improvements to reduce weight and increase reliability and performance. The agency is collaborating with the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) to evaluate the bus in revenue service. NREL has previously published two reports documenting the operation of the fuel cell bus in service. This report provides a summary of the results with a focus on the bus operation from July 2011 through January 2012.

  12. SunLine Transit Agency Advanced Technology Fuel Cell Bus Evaluation: Fourth Results Report

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, L.; Chandler, K.

    2013-01-01

    SunLine Transit Agency, which provides public transit services to the Coachella Valley area of California, has demonstrated hydrogen and fuel cell bus technologies for more than 10 years. In May 2010, SunLine began demonstrating the advanced technology (AT) fuel cell bus with a hybrid electric propulsion system, fuel cell power system, and lithium-based hybrid batteries. This report describes operations at SunLine for the AT fuel cell bus and five compressed natural gas buses. The U.S. Department of Energy's National Renewable Energy Laboratory (NREL) is working with SunLine to evaluate the bus in real-world service to document the results and help determine the progress toward technology readiness. NREL has previously published three reports documenting the operation of the fuel cell bus in service. This report provides a summary of the results with a focus on the bus operation from February 2012 through November 2012.

  13. Measurement and Evaluation of Heating Performance of Heat Pump Systems Using Wasted Heat from Electric Devices for an Electric Bus

    Directory of Open Access Journals (Sweden)

    Moo-Yeon Lee

    2012-03-01

    Full Text Available The objective of this study is to investigate heating performance characteristics of a coolant source heat pump using the wasted heat from electric devices for an electric bus. The heat pump, using R-134a, is designed for heating a passengers’ compartment by using discharged energy from the coolant of electric devices, such as motors and inverters of the electric bus. The heating performance of the heat pump was tested by varying the operating parameters, such as outdoor temperature and volume flow rate of the coolant water of the electrical devices. Heating capacity, compressor work, and heating COP were measured; their behaviors with regard to the parameters were observed. Experimental results showed that heating COP increased with decrease of outdoor temperature, from 20.0 °C to 0 °C, and it observed to be 3.0 in the case of 0 °C outdoor temperature. The observed characteristics of the heating COP suggest that the heat pump is applicable as the cabin heater of an electric vehicle, which is limited by short driving range.

  14. Best Operational and Maintenance Practices for City Bus Fleets to Maximize Fuel Economy

    OpenAIRE

    World Bank

    2011-01-01

    In most large cities in developing countries, buses continue to be the public transport option of choice, carrying a large share of urban travelers. However, transit bus companies in these countries are often cash-strapped. In many cases, the operating cost per bus kilometer exceeds revenues and bus fares are often kept low irrespective of the cost of providing service. Many cities are dom...

  15. Reducing carbon emissions by introducing electric vehicle enhanced dedicated bus lanes

    OpenAIRE

    Doolan, Ronan; Muntean, Gabriel-Miro

    2014-01-01

    Most cities have special lanes dedicated to buses, however these lanes are rarely used at full capacity. At the same time governments around the world are encouraging people to buy electric vehicles. This paper proposes the creation of electric vehicle enhanced dedicated bus lanes (E-DBL), by allowing electric vehicles access to bus lanes, in order to improve the use of road capacity. By opening bus lanes to electric vehicles, traffic congestion could be eased, the range ...

  16. The impact of bus drivers ’ lifestyle on the occurrence of health problems and absenteeism

    OpenAIRE

    Andrej Jerman; Maja Meško

    2016-01-01

    Research Question: Do bus drivers’ lifestyles affect the occurrence of health problems and absenteeism? Purpose: The purpose of the study was to determine whether the lifestyle of professional bus drivers affects the occurrence of health problems and the phenomenon of absenteeism. Method: A quantitative research method was used in the research. Data were collected using a structured questionnaire, on a sample of 230 professional bus drivers from differ...

  17. The Bus Extension Module Design and Verification of POSAFE-Q Using LVDS

    International Nuclear Information System (INIS)

    This paper described the Bus Extension Module using Low Voltage Differential Signal (LVDS). A Bus Extension Module use Safety-Related PLC (Programmable Logic Controller), called POSAFE-Q (made by POSCO ICT), for handling many data (I/O) extension rack. A processor module of POSAFE-Q can control I/O Module installed another rack. This paper explains Bus Extension Module and Data transfer technology using LVDS. (author)

  18. Introduction to corridor selection & assessment for Bus Rapid Transit System (BRTS) in Hyderabad

    OpenAIRE

    Bhanu Kireeti Chanda; Maddali Sai Satya Goutham

    2014-01-01

    Bus rapid transit system is an innovation and it is up gradation to the present transport system. BRT is affordable, adaptable and cost effective. The term of rapid transit system means a form of high speed urban passenger transportation. Here, the mode of transportation is bus hence it is called as bus rapid transit system (BRTS). Transportation facilities and the system will be different form different countries. Especially for the developing countries, transportation is a problem and BR...

  19. The influence of bus stop on traffic flow with velocity-difference-separation model

    Science.gov (United States)

    Zheng, Pengjun; Wang, Wei; Ge, Hongxia

    2016-06-01

    Based on velocity-difference-separation model, the mixed traffic flow on two-lane road is investigated. For a fixed road length, the influence of bus and bus stops on traffic flow is studied with the increasing traffic density. Compared with the result without bus stops given by Li et al., a new traffic state is found, which is valuable for studying the impacts of public transport on urban traffic flow.

  20. Global Optimal Energy Management Strategy Research for a Plug-In Series-Parallel Hybrid Electric Bus by Using Dynamic Programming

    Directory of Open Access Journals (Sweden)

    Hongwen He

    2013-01-01

    Full Text Available Energy management strategy influences the power performance and fuel economy of plug-in hybrid electric vehicles greatly. To explore the fuel-saving potential of a plug-in hybrid electric bus (PHEB, this paper searched the global optimal energy management strategy using dynamic programming (DP algorithm. Firstly, the simplified backward model of the PHEB was built which is necessary for DP algorithm. Then the torque and speed of engine and the torque of motor were selected as the control variables, and the battery state of charge (SOC was selected as the state variables. The DP solution procedure was listed, and the way was presented to find all possible control variables at every state of each stage in detail. Finally, the appropriate SOC increment is determined after quantizing the state variables, and then the optimal control of long driving distance of a specific driving cycle is replaced with the optimal control of one driving cycle, which reduces the computational time significantly and keeps the precision at the same time. The simulation results show that the fuel economy of the PEHB with the optimal energy management strategy is improved by 53.7% compared with that of the conventional bus, which can be a benchmark for the assessment of other control strategies.

  1. Development of HFF6120G03SHEV Plug-in Hybrid Electric Bus%HFF6120G03SHEV插电式混合动力客车开发

    Institute of Scientific and Technical Information of China (English)

    王少凯

    2015-01-01

    简要介绍HFF6120G03SHEV插电式混合动力客车整车的开发和驱动控制系统的设计,以及整车动力电池组布置技术方案.%The author briefly introduces the whole vehicle development, drive control system design and the vehicle power battery layout scheme of HFF6120G03SHEV plug-in hybrid electric bus.

  2. Electric Vehicle - Economical driving

    DEFF Research Database (Denmark)

    Jensen, VCE, Steen V.; Schøn, Henriette

    1999-01-01

    Instruct the reader in getting most satisfaction out of an EV, especially concerning driving and loading.......Instruct the reader in getting most satisfaction out of an EV, especially concerning driving and loading....

  3. Dementia and driving

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/patientinstructions/000028.htm Dementia and driving To use the sharing features on ... please enable JavaScript. If your loved one has dementia, deciding when they can no longer drive may ...

  4. A Prediction System Using a P2P Overlay Network for a Bus Arrival System

    Directory of Open Access Journals (Sweden)

    Ssu-Hsuan Lu

    2014-01-01

    Full Text Available Along with the evolution of times and the surge of metropolitan populations, government agencies often promote the construction of public transport. Unlike rail transportation or rapid transit systems, it is often difficult to estimate the vehicle arrival times at each station in a bus transportation system due to metropolitan transportation congestion. Traffic status is often monitored using wireless sensor networks (WSNs. However, WSNs are always separated from one another spatially. Recent studies have considered the connection of multiple sensor networks. This study considers a combination view of peer-to-peer (P2P overlay networks and WSN architecture to predict bus arrival times. Each bus station, which is also a P2P overlay peer, is connected in a P2P overlay network. A sensor installed in each bus can receive data via peers to obtain the moving speed of a bus. Then, each peer can exchange its data to predict bus arrival times at bus stations. This method can considerably increase the accuracy with which bus arrival times can be predicted and can provide traffic status with high precision. Furthermore, these data can also be used to plan new bus routes according to the information gathered.

  5. Bitmap-Wise Wireless M-Bus Coordination for Sustainable Real Time Energy Management

    OpenAIRE

    Kwang-il Hwang; Sung-wook Nam

    2014-01-01

    Even though WM-Bus is being considered to be the most promising network protocol for smart metering, it is not suitable for a sustainable real-time home energy management system (HEMS), which requires higher reliability and longer lifetime despite real time bi-directional communications. Therefore, in this paper we propose a Bitmap-wise WM-Bus (BWM-Bus), coping well with sustainable real-time HEMS. In particular, the proposed scheme addresses the several problems in WM-Bus for HEMS by introdu...

  6. An interactive wireless communication system for visually impaired people using city bus transport.

    Science.gov (United States)

    Wang, Hsiao-Lan; Chen, Ya-Ping; Rau, Chi-Lun; Yu, Chung-Huang

    2014-05-01

    Visually impaired people have difficulty accessing information about public transportation systems. Several systems have been developed for assisting visually impaired and blind people to use the city bus. Most systems provide only one-way communication and require high-cost and complex equipment. The purpose of this study is to reduce the difficulties faced by visually impaired people when taking city buses, using an interactive wireless communication system. The system comprised a user module and a bus module to establish a direct one-to-one connection. When the user inputs 4-digit numbers, the user module immediately sends out the information. If the bus module receives the matched bus number, it buzzes and the warning LED flashes to notify the bus driver that someone is waiting to board on the bus. User tests were conducted by two visually impaired people in a simulated vehicle and a city bus. The success rate of interactive wireless communication, recognizing the arrival of the bus and boarding the correct bus reached 100% in all of the tests. The interactive wireless communication aid system is a valid and low-cost device for assisting visually impaired people to use city buses.

  7. Gear bearing drive

    Science.gov (United States)

    Weinberg, Brian (Inventor); Mavroidis, Constantinos (Inventor); Vranish, John M. (Inventor)

    2011-01-01

    A gear bearing drive provides a compact mechanism that operates as an actuator providing torque and as a joint providing support. The drive includes a gear arrangement integrating an external rotor DC motor within a sun gear. Locking surfaces maintain the components of the drive in alignment and provide support for axial loads and moments. The gear bearing drive has a variety of applications, including as a joint in robotic arms and prosthetic limbs.

  8. Ultra-Capacitor Energy Storage in a Large Hybrid Electric Bus

    Science.gov (United States)

    Viterna, L. A.

    1997-01-01

    The power requirements for inner city transit buses are characterized by power peaks about an order of magnitude larger than the average power usage of the vehicle. For these vehicles, hybrid power trains can offer significantly improved fuel economy and exhaust emissions. A critical design challenge, however, has been developing the energy storage and power management system to respond to these rapid power variations. Most hybrid vehicles today use chemical energy storage batteries to supplement the power from the fuel burning generator unit. Chemical storage batteries however, present several difficulties in power management and control. These difficulties include (1) inadequate life, (2) limited current delivery as well as absorption during regenerative braking, (3) inaccurate measurement of state of charge, and (4) stored energy safety issues. Recent advances in ultra-capacitor technology create an opportunity to address these concerns. The NASA Lewis Research Center, in cooperation with industry and academia, has developed an advanced hybrid electric transit bus using ultra-capacitors as the primary energy storage system. At over 15,000-kg gross weight, this is the largest vehicle of its kind ever built using this advanced energy storage technology. Results of analyses show that the vehicle will match the performance of an equivalent conventionally powered vehicle over typical inner city drive cycles. This paper describes the overall power system architecture, the evolution of the control strategy, and analysis of power flow and vehicle performance.

  9. High performance AC drives

    CERN Document Server

    Ahmad, Mukhtar

    2010-01-01

    This book presents a comprehensive view of high performance ac drives. It may be considered as both a text book for graduate students and as an up-to-date monograph. It may also be used by R & D professionals involved in the improvement of performance of drives in the industries. The book will also be beneficial to the researchers pursuing work on multiphase drives as well as sensorless and direct torque control of electric drives since up-to date references in these topics are provided. It will also provide few examples of modeling, analysis and control of electric drives using MATLAB/SIMULIN

  10. Simple Driving Techniques

    DEFF Research Database (Denmark)

    Rosendahl, Mads

    2002-01-01

    Driving was introduced as a program transformation technique by Valentin Turchin in some papers around 1980. It was intended for the programming language REFAL and used in metasystem transitions based on super compilation. In this paper we present one version of driving for a more conventional lisp......-like language. Our aim is to extract a simple notion of driving and show that even in this tamed form it has much of the power of more general notions of driving. Our driving technique may be used to simplify functional programs which use function composition and will often be able to remove intermediate data...

  11. BC Transit Fuel Cell Bus Project Evaluation Results: Second Report

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, L.; Post, M.

    2014-09-01

    Second report evaluating a fuel cell electric bus (FCEB) demonstration led by British Columbia Transit (BC Transit) in Whistler, Canada. BC Transit is collaborating with the California Air Resources Board and the U.S. Department of Energy's National Renewable Energy Laboratory to evaluate the buses in revenue service. NREL published its first report on the demonstration in February 2014. This report is an update to the previous report; it covers 3 full years of revenue service data on the buses from April 2011 through March 2014 and focuses on the final experiences and lessons learned.

  12. Fuel options for public bus fleets in Sweden

    OpenAIRE

    Xylia, Maria; Silveira, Semida

    2015-01-01

    The Swedish public transport sector has defined two major targets, i.e., to run 90% of the total vehicle kilometers of the fleet on non-fossil fuels and double the volume of travel via public transport by 2020, increasing the share of public transport in relation to the total personal transport in the country . The f3 report Fuel options for public bus fleets in Sweden highlights the challenges and solutions encountered, particularly when it comes to the adoption of renewable fuels in the reg...

  13. Communication Architecture Synthesis for Multi-bus SoC

    Directory of Open Access Journals (Sweden)

    Abdelkrim Zitouni

    2006-01-01

    Full Text Available In the systems on chip (SoC design, the synthesis of communication architecture constitutes the bottleneck which can affect the performances of the system. Various schemes and protocols can be necessary, just as various topologies of interconnection. To reduce the complexity of the communications refinement, we present in this study a model and a synthesis approach for multi-bus communication architecture containing centralized bridge. The automation of the arbiter synthesis step profited from a detailed attention. This stage generates a hierarchical arbiter integrating various priority arbitration modules. The proposed approach was integrated in a toolbox based environment

  14. Energy model of network-on-chip and a bus

    OpenAIRE

    Wolkotte, Pascal T.; Smit, Gerard J.M.; Kavaldjiev, Nikolay; Becker, Jens E.; Becker, Jurgen

    2005-01-01

    A Network-on-Chip (NoC) is an energy-efficient onchip communication architecture for Multi-Processor Systemon- Chip (MPSoC) architectures. In earlier papers we proposed two Network-on-Chip architectures based on packet-switching and circuit-switching. In this paper we derive an energy model for both NoC architectures to predict their energy consumption per transported bit. Both architectures are also compared with a traditional bus architecture. The energy model is primarily needed to find a ...

  15. Energy Model of Networks-on-Chip and a Bus

    OpenAIRE

    Wolkotte, Pascal T.; Smit, Gerard J.M.; Kavaldjiev, Nikolay; Becker, Jens E.; Becker, Jürgen

    2005-01-01

    A Network-on-Chip (NoC) is an energy-efficient onchip communication architecture for Multi-Processor Systemon-Chip (MPSoC) architectures. In earlier papers we proposed two Network-on-Chip architectures based on packet-switching and circuit-switching. In this paper we derive an energy model for both NoC architectures to predict their energy consumption per transported bit. Both architectures are also compared with a traditional bus architecture. The energy model is primarily needed to find a n...

  16. DC Bus Regulation with a Flywheel Energy Storage System

    Science.gov (United States)

    Kenny, Barbara H.; Kascak, Peter E.

    2003-01-01

    This paper describes the DC bus regulation control algorithm for the NASA flywheel energy storage system during charge, charge reduction and discharge modes of operation. The algorithm was experimentally verified with results given in a previous paper. This paper presents the necessary models for simulation with detailed block diagrams of the controller algorithm. It is shown that the flywheel system and the controller can be modeled in three levels of detail depending on the type of analysis required. The three models are explained and then compared using simulation results.

  17. Distributed Data Acquisition and Control by Software Bus

    Institute of Scientific and Technical Information of China (English)

    Cecil Bruce-Boye; Dmitry A. Kazakov

    2004-01-01

    Increasing global competition forces manufacturers of products from all technical fields to guarantee a high product quality for a long period of time. At the same time it is necessary to minimize production costs. In order to meet all these requirements, on-line data acquisition and processing are of increasing importance in distributed automation systems. A software bus operating on industrial Ethernet has an ability to minimize operating costs by offering easy installation, scalability,high degree of reliability and remote monitoring and control.

  18. Landscape heritage objects' effect on driving: a combined driving simulator and questionnaire study.

    Science.gov (United States)

    Antonson, Hans; Ahlström, Christer; Mårdh, Selina; Blomqvist, Göran; Wiklund, Mats

    2014-01-01

    According to the literature, landscape (panoramas, heritage objects e.g. landmarks) affects people in various ways. Data are primarily developed by asking people (interviews, photo sessions, focus groups) about their preferences, but to a lesser degree by measuring how the body reacts to such objects. Personal experience while driving a car through a landscape is even more rare. In this paper we study how different types of objects in the landscape affect drivers during their drive. A high-fidelity moving-base driving simulator was used to measure choice of speed and lateral position in combination with stress (heart rate measure) and eye tracking. The data were supplemented with questionnaires. Eighteen test drivers (8 men and 10 women) with a mean age of 37 were recruited. The test drivers were exposed to different new and old types of landscape objects such as 19th century church, wind turbine, 17th century milestone and bus stop, placed at different distances from the road driven. The findings are in some respect contradictory, but it was concluded that that 33% of the test drivers felt stressed during the drive. All test drivers said that they had felt calm at times during the drive but the reason for this was only to a minor degree connected with old and modern objects. The open landscape was experienced as conducive to acceleration. Most objects were, to a small degree, experienced (subjective data) as having a speed-reducing effect, much in line with the simulator data (objective data). Objects close to the road affected the drivers' choice of' lateral position. No significant differences could be observed concerning the test drivers' gaze between old or modern objects, but a significant difference was observed between the test drivers' gaze between road stretches with faraway objects and stretches without objects. No meaningful, significant differences were found for the drivers' stress levels as measured by heart rate. PMID:24172083

  19. Bus Stops, Bus stops created from hard copy CAT transit maps. Includes information on if there is a shelter present or not., Published in 2010, 1:4800 (1in=400ft) scale, City of Bismarck.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Bus Stops dataset, published at 1:4800 (1in=400ft) scale, was produced all or in part from Hardcopy Maps information as of 2010. It is described as 'Bus stops...

  20. 混合动力客车控制策略设计%Control Strategy Design of the Hybrid Bus

    Institute of Scientific and Technical Information of China (English)

    孙丽; 邓永瑞

    2013-01-01

    Control strategy design is one of the key technologies of the hybrid bus, which has a greater impact on the performances of the vehicle. In order to make a modified hybrid bus have better power and economy, it puts forward a set of logic threshold strategies based on engineering experience. By setting the speed, the battery state of charge (SOC)and the upper and lower engine torque and other parameters of a set threshold, according to pre-bus real-time parameters and dynamic system of rules to adjust the working status of components, the corresponding control strategies of pure electric mode, pure electric ready mode, engine individual drive mode, parking power generation mode and united drive mode design model are designed. The strategy is relatively simple and intuitive, with a strong practical value.%控制策略设计是混合动力汽车的关键技术之一,对车辆的性能有着较大影响.为了使某款改装的混合动力客车有较好的动力性和经济性,依据工程经验,提出一套逻辑门限值策略.通过设置车速、电池荷电状态(SOC)上下限及发动机工作转矩等一组门限参数,根据客车的实时参数及预定的规则调整动力系统各部件的工作状态,分别为纯电动模式、纯电动准备模式、发动机单独驱动模式、停车发电模式和联合驱动模式设计了相应的控制策略.该策略比较简单、直观,具有较强的实用价值.

  1. A Multi-Pulse Front-End Rectifier System with Electronic Phase-Shifting for Harmonic Mitigation in Motor Drive Applications

    DEFF Research Database (Denmark)

    Zare, Firuz; Davari, Pooya; Blaabjerg, Frede

    2016-01-01

    In this paper, an electronic phase-shifting strategy has been optimized for a multi-parallel configuration of line-commutated rectifiers with a common dc-bus voltage used in motor drive application. This feature makes the performance of the system independent of the load profile and maximizes its...

  2. Bus Stops, Maryland Transit Administration Local and Commuter Bus Stops, Published in 2013, 1:24000 (1in=2000ft) scale, Maryland Transit Administration.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Bus Stops dataset, published at 1:24000 (1in=2000ft) scale, was produced all or in part from Other information as of 2013. It is described as 'Maryland Transit...

  3. Bus Routes, This shapefile contains lines that follow the path of the existing bus routes, Published in 2006, Charlotte Area Transit System.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Bus Routes dataset, was produced all or in part from Other information as of 2006. It is described as 'This shapefile contains lines that follow the path of...

  4. Variability of particle number emissions from diesel and hybrid diesel-electric buses in real driving conditions.

    Science.gov (United States)

    Sonntag, Darrell B; Gao, H Oliver; Holmén, Britt A

    2008-08-01

    A linear mixed model was developed to quantify the variability of particle number emissions from transit buses tested in real-world driving conditions. Two conventional diesel buses and two hybrid diesel-electric buses were tested throughout 2004 under different aftertreatments, fuels, drivers, and bus routes. The mixed model controlled the confounding influence of factors inherent to on-board testing. Statistical tests showed that particle number emissions varied significantly according to the after treatment, bus route, driver, bus type, and daily temperature, with only minor variability attributable to differences between fuel types. The daily setup and operation of the sampling equipment (electrical low pressure impactor) and mini-dilution system contributed to 30-84% of the total random variability of particle measurements among tests with diesel oxidation catalysts. By controlling for the sampling day variability, the model better defined the differences in particle emissions among bus routes. In contrast, the low particle number emissions measured with diesel particle filters (decreased by over 99%) did not vary according to operating conditions or bus type but did vary substantially with ambient temperature.

  5. UNIVERSALIZATION OF BUS BODY FACING DETAILS AND PRODUCTION TOOLING FOR THEIR MANUFACTURING

    Directory of Open Access Journals (Sweden)

    M. Taranenko

    2009-01-01

    Full Text Available The directions concerning bus body production costs reduction based on large-size facing details stamping on electric-hydraulic presses are considered. The engineering of unified large-size facing detail blanks, manufacturing processes and variants of unified technological tooling for bus body facing details production, including simple- or multi-type details are described.

  6. 49 CFR 571.131 - Standard No. 131; School bus pedestrian safety devices.

    Science.gov (United States)

    2010-10-01

    ... devices. S1. Scope. This standard establishes requirements for devices that can be installed on school... a stopped school bus and striking pedestrians in the vicinity of the bus. S3. Application. This standard applies to school buses other than multifunction school activity buses. S4. Definitions....

  7. Evoking Emotions and Unpacking Layered Histories through Young Children's Illustrations of Racial Bus Segregation

    Science.gov (United States)

    Kuby, Candace R.

    2013-01-01

    Drawing on theories of multi-modality and critical visual literacy, this article focuses on images that five-and six year-olds painted in a class-made book, Voice on the Bus, about racial segregation. The article discusses how children used illustrations to convey their understandings of Rosa Parks' bus arrest in Alabama. A post-structural view…

  8. Genetic algorithm for optimization in adaptive bus signal priority control

    Directory of Open Access Journals (Sweden)

    Tran Vu TU

    2013-01-01

    Full Text Available This paper firstly proposes an improved genetic algorithm (GA for optimization in adaptive bus signal priority control at signalized intersections. Unlike conventional genetic algorithms with slow convergence speed, this algorithm can increase the convergence speed by utilizing the compensation rule between consecutive signal cycles to narrow new possible generated population spaces. Secondly, the paper would like to present a way to apply the algorithm to a simple adaptive bus signal priority control as well as compare how much the computation time is saved when applying the improved algorithm. Then the research thirdly investigates the efficiency of the proposed algorithm under various flow rate situations. The results show that the improved genetic algorithm can reduce the computation time considerably, by up to 48.39% for the studied case. With high saturation degrees on the cross street, the convergence rate performance of the improved genetic algorithm is significantly good. The figure can be up to 36.2% when compared with the convergence rate of the conventional GA.

  9. Bus Rapid Transit (BRT System Impacts to Environmental Quality

    Directory of Open Access Journals (Sweden)

    Mojtaba Shojaei Baghini

    2014-02-01

    Full Text Available The aim of this research is to examine the mechanism and performance of Bus Rapid Transit (BRT system and its impacts on environment quality. Environment quality is an indicator of regional quality of life, supporting the health and well-being of the public and sustainability of the urban and natural environment. Transit agencies are adopting vehicles with alternative fuels, propulsion systems and pollutant emissions controls. One of the ways to improve the transportation environment is through the reduction of BRT emissions to improve air quality. The primary advantage of Bus Rapid Transit (BRT system is that it can be adapted to a multitude of operating environments, with sufficient scalability to deliver increased carrying capacity to meet future ridership growth. Moreover, the system will also likely reduce overall the noise levels by determining suitable noise management systems. The paper finds that a BRT system offers the greatest potential for greenhouse gas reductions primarily because BRT vehicles generally offer lower CO2 emissions per passenger mile than other transportation system.

  10. CERPEN FARUK “BUS KOTA” DALAM SEMIOTIK ROLAND BARTHES

    Directory of Open Access Journals (Sweden)

    Ken Widyatwati

    2016-04-01

    Full Text Available Literature called beautiful if it contains the mandate, message, ideas and meanings that are useful for the readers. Short story “Bus Kota” (City Bus containing the mandate, message, ideas and meanings that are useful to the reader. The mandate will be revealed by Roland Barthes' semiotic theory in the book S/Z. Literature has its own allure and text have accrued but not due to independence because of the difference in quality. Texts merge into a unity, or restore any text not as an individual but as a form of plurality. Literature as part of a social system is an expression of the author's sense of the outpouring of public life. Literary works can express themselves in the author's view the social and cultural changes in society because of the development of information technology and rapid. Technological developments and socio-cultural information can change in society so as to affect the psychology of the people. Society must have a thickness of faith not only for themselves, but to be able to maintain equanimity in the life of a pluralistic society

  11. Development of an integrated cryogenic bus for spacecraft applications

    Science.gov (United States)

    Bugby, David C.; Brennan, Patrick J.; Davis, Thomas M.; Tomlinson, Joe; Stoyanof, Marko; Crawford, Larry; Glaister, David S.

    1997-01-01

    To improve the efficiency and reduce the overdesign penalties associated with integrating cryogenic systems into spacecraft, the Integrated Cryogenic Bus (ICB) program was initiated in April 1996. The technical objectives of the program were to develop an integrated, lightweight means of thermally linking a cryogenic cooling source to a cooled satellite component, to commonize the interfaces to the cooling source and cooled component, and to commonize the integration of these systems into spacecraft. The technical plan involves several steps beginning with the definition of requirements, the identification and characterization of potential bus components, the development of new concepts and optimization methods, breadboard testing, and prototype development. Six months into the program, over 25 cryocooler, focal plane, and cryogenic hardware organizations have been interviewed or surveyed to identify requirements, numerous components have been identified and characterized, several preliminary concepts have been developed, an optimization plan has been outlined, and critical breadboard tests have begun. This paper summarizes the progress to date during Phase I of this Phillips Laboratory program funded by the Ballistic Missile Defense Organization (BMDO).

  12. Bus Implementation Using New Low Power PFSCL Tristate Buffers

    Directory of Open Access Journals (Sweden)

    Neeta Pandey

    2016-01-01

    Full Text Available This paper proposes new positive feedback source coupled logic (PFSCL tristate buffers suited to bus applications. The proposed buffers use switch to attain high impedance state and modify the load or the current source section. An interesting consequence of this is overall reduction in the power consumption. The proposed tristate buffers consume half the power compared to the available switch based counterpart. The issues with available PFSCL tristate buffers based bus implementation are identified and benefits of employing the proposed tristate buffer topologies are put forward. SPICE simulation results using TSMC 180 nm CMOS technology parameters are included to support the theoretical formulations. The performance of proposed tristate buffer topologies is examined on the basis of propagation delay, output enable time, and power consumption. It is found that one of the proposed tristate buffer topology outperforms the others in terms of all the performance parameters. An examination of behavior of available and the proposed PFSCL tristate buffer topologies under parameter variations and mismatch shows a maximum variation of 14%.

  13. Studying customer loyalty at Daewoo express bus service, Pakistan

    Directory of Open Access Journals (Sweden)

    Usman Yousaf

    2013-09-01

    Full Text Available Background: Meeting service quality standards and striving for loyalty are two critical areas which have until now been overlooked by both the passenger transport industry and academia in Pakistan therefore the study sheds useful light on an issue hitherto untouched. Therefore increased sample size will help in increasing generalizability of study. Methods: This paper is designed to study the level of loyalty at Daewoo Express Bus Service in Sargodha by measuring customer satisfaction. Researchers used a small sample of only 96 respondents (passengers and only studies customer's behavior in the service quality of Daewoo Express Bus Service however it may differ in other passenger transport services. Results and conclusions: This paper reveals that there is a positive and significant relationship between loyalty (dependant variable and price perceptions, reliability, retrieving and smoothing (independent variables. However, the study found that reliability of services is the most important dimension among other independent variables (price perceptions, smoothing, reliability, retrieving effecting customers loyalty at Daewoo Express. Paper under consideration would surely assist Daewoo`s management team to take care of the loopholes existing in the current service level and likely threats which Daewoo might face.

  14. Study on the optimum design of bus window pillar join40t; Bus window pillar ketsugo buzai no saiteki sekkei ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Tomioka, N. [Nihon University, Tokyo (Japan); Lim, S.; Kim, M.; Lee, H.; Kang, S.; Bae, D.

    1997-10-01

    Automobile body structure is generally assembled using various spot welded box sectional members. Especially, in the case of the bus, the shape of window pillar joint is assembled m T-type. This T-type member has some problem such as high stress concentration, low fatigue strength and structural rigidity. Therefore, in this report, performed a study on the optimum design of the bus window pillar joint for such problem by FEM analysis and experiments. 1 ref., 10 figs., 2 tabs.

  15. A Study of BUS Architecture Design for Controller of Nuclear Power Plant Using FPGA

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Dongil; Yun, Donghwa; Hwang, Sungjae; Kim, Myeongyun; Lee, Dongyun [PONUTech Co. Ltd., Seoul (Korea, Republic of)

    2014-05-15

    CPU (Central Processing Unit) operating speed and communication rate have been more technically improved than before. However, whole system is been a degradation of performance by electronic and structural limitation of parallel bus. Transmission quantity and speed have a limit and need arbiter in order to do arbitration because several boards shared parallel bus. Arbiter is a high complexity in implementing so it increases component per chip. If a parallel bus uses, it will occurs some problems what are reflection noise, power/ground noise (or ground bounce) as SSN (Simultaneous Switching Noise) and crosstalk noise like magnetic coupling. In this paper, in order to solve a problem of parallel bus in controller of NPP (Nuclear Power Plant), proposes the bus architecture design using FPGA (Field Programmable Gate Array) based on LVDS (Low Voltage Differential Signaling)

  16. SunLine Transit Agency Advanced Technology Fuel Cell Bus Evaluation: Second Results Report and Appendices

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, L.; Chandler, K.

    2011-10-01

    This report describes operations at SunLine Transit Agency for their newest prototype fuel cell bus and five compressed natural gas (CNG) buses. In May 2010, SunLine began operating its sixth-generation hydrogen fueled bus, an Advanced Technology (AT) fuel cell bus that incorporates the latest design improvements to reduce weight and increase reliability and performance. The agency is collaborating with the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) to evaluate the bus in revenue service. This is the second results report for the AT fuel cell bus since it was placed in service, and it focuses on the newest data analysis and lessons learned since the previous report. The appendices, referenced in the main report, provide the full background for the evaluation. They will be updated as new information is collected but will contain the original background material from the first report.

  17. Superluminal warp drive

    International Nuclear Information System (INIS)

    In this Letter we consider a warp drive spacetime resulting from that suggested by Alcubierre when the spaceship can only travel faster than light. Restricting to the two dimensions that retains most of the physics, we derive the thermodynamic properties of the warp drive and show that the temperature of the spaceship rises up as its apparent velocity increases. We also find that the warp drive spacetime can be exhibited in a manifestly cosmological form

  18. Development of a New Hybrid Electric City Bus%一种新型混合动力城市客车的开发

    Institute of Scientific and Technical Information of China (English)

    陈红涛; 史广奎; 王仁广; 张林涛; 于潮

    2012-01-01

    It introduces a new kind of hybrid power train which can be used in parallel/series HEV city bus to meet the requirements of saving energy and reducing pollution. The power train has low and high speed operation modes. The HEV city bus adopting this new type hybrid power train has four operation modes including pure electric driving, parallel /series driving, generating with bus stop, and charging from grid. The new technology makes the engine, generator and motor work match smoothly to reach the target of reducing pollution and using fuel more efficiently.%针对城市公交客车的实际运行工况需要,开发出一种新型混合动力总成装置,用于混合动力城市公交客车.混合动力总成具有高低速双电机模式,能充分发挥串联式和并联式优点.混合动力客车具有纯电、混联、驻车发电和电网充电4种工作模式,使发动机、发电机、电机等部件更优化地匹配工作,在结构上保证了在复杂的工况下系统工作在最优状态,达到更高的节能和减排目标.

  19. Universal Drive Train Facility

    Data.gov (United States)

    Federal Laboratory Consortium — This vehicle drive train research facility is capable of evaluating helicopter and ground vehicle power transmission technologies in a system level environment. The...

  20. Energy Management Strategy Based on the Driving Cycle Model for Plugin Hybrid Electric Vehicles

    Directory of Open Access Journals (Sweden)

    Xiaoling Fu

    2014-01-01

    Full Text Available The energy management strategy (EMS for a plugin hybrid electric vehicle (PHEV is proposed based on the driving cycle model and dynamic programming (DP algorithm. A driving cycle model is constructed by collecting and processing the driving data of a certain school bus. The state of charge (SOC profile can be obtained by the DP algorithm for the whole driving cycle. In order to optimize the energy management strategy in the hybrid power system, the optimal motor torque control sequence can be calculated using the DP algorithm for the segments between the traffic intersections. Compared with the traditional charge depleting-charge sustaining (CDCS strategy, the test results on the ADVISOR platform show a significant improvement in fuel consumption using the EMS proposed in this paper.

  1. Electric Vehicle - Economical driving

    DEFF Research Database (Denmark)

    Jensen, VCE, Steen V.; Schøn, Henriette

    1999-01-01

    How do you reduce the energy-wast when driving and loading EV's - or rather: How do I get more km/l out of an EV......How do you reduce the energy-wast when driving and loading EV's - or rather: How do I get more km/l out of an EV...

  2. Piezoelectric drive circuit

    Science.gov (United States)

    Treu, Jr., Charles A.

    1999-08-31

    A piezoelectric motor drive circuit is provided which utilizes the piezoelectric elements as oscillators and a Meacham half-bridge approach to develop feedback from the motor ground circuit to produce a signal to drive amplifiers to power the motor. The circuit automatically compensates for shifts in harmonic frequency of the piezoelectric elements due to pressure and temperature changes.

  3. Recognizing driving in haste

    NARCIS (Netherlands)

    Rendón-Vélez, E.

    2014-01-01

    One can often hear people discussing the reasons why a road accident has happened: “She had to pick up her kids in the school before four o’clock and she was driving in haste and careless”, “He was stressed, he wanted to reach the beginning of the football match, tried to drive faster and didn't app

  4. Electric vehicles: Driving range

    Science.gov (United States)

    Kempton, Willett

    2016-09-01

    For uptake of electric vehicles to increase, consumers' driving-range needs must be fulfilled. Analysis of the driving patterns of personal vehicles in the US now shows that today's electric vehicles can meet all travel needs on almost 90% of days from a single overnight charge.

  5. Fundamentals of electrical drives

    CERN Document Server

    Veltman, André; De Doncker, Rik W

    2007-01-01

    Provides a comprehensive introduction to various aspects of electrical drive systems. This volume provides a presentation of dynamic generic models that cover all major electrical machine types and modulation/control components of a drive as well as dynamic and steady state analysis of transformers and electrical machines.

  6. Drive Around the World

    Institute of Scientific and Technical Information of China (English)

    Yang Wei

    2008-01-01

    @@ "It's so cool that I can drive on my own,and my own car,"Cao Gang,WOrking for a private company in Changsha,capital city of Hunan Province,mid-south China,said in excitement when he newly bought Ben Ben,a Chinese local auto brand of Chang'an,with his freshly-passed driving license.

  7. Wind farm protection using an IEC 61850 process bus architecture

    Energy Technology Data Exchange (ETDEWEB)

    McGinn, D. [GE Digital Energy, Toronto, ON (Canada)

    2009-07-01

    This presentation discussed wind farm protection using an IEC 61850 process bus architecture. Data is transmitted via IEC 61850 messages over a fiber optic communications network to a central relaying unit (CRU) that executes protection and control (P and C) functions for a whole wind farm. The presentation also discussed the need to further simplify P and C design. Challenges of wind farm protection include physical distance; relay location; and selectivity/isolation. P and C hardware evolution was illustrated and its advantages were presented. These included one relay to set, configure, test, and maintain; eliminate the need for transfer trips; free monitoring; free disturbance recording; and easy integration of data. The development of commercially available systems began around 1990 with the IPACS system developed by Hydro One, and the SIPSUR system developed in Spain. 7 figs.

  8. Design and Analysis of Bus Front Panel Usin G FRP

    Directory of Open Access Journals (Sweden)

    G. Adinarayana

    2014-10-01

    Full Text Available Recently, Advance composite materials have taken the significant share with other engineering materials due to its mechanical properties and high strength to weight ratio. Advance composite like E-glass, S-glass, Carbon fiber, Kevlar are not yet confined at the aerospace industry but gradually these are taking over the position of other industries as well. Because of its attaining high intricacy in designing factors and as well as cheaper mould design and also less cost in production of few numbers. The applications of FRPs are spirally increasing. The aim of this project is to develop a BUS FRONT PANEL with a help of FRPs in order to sustain all the mechanical properties which are equivalent to the metals with the help of advanced computer aided software designs like ANSYS. In computer aided engineering to make the product proven in the realistic market.

  9. FAKTOR PENYEBAB KERUSAKAN SISTEM MESIN PADA BUS APTB PPD

    Directory of Open Access Journals (Sweden)

    Laela Chairani

    2015-06-01

    Full Text Available Comfort and safety of public transportation, particularly APTB PPD buses, becomes high expectations for its customers. Those expectations must be supported by the application of a good engine maintenance system. By using the method of Reliability Centered Maintenance may be determined appropriate actions to mitigate damage. From the analysis known the failures of the APTB PPD bus are malfunctions of the fuel engine, power transfer systems, difficulty to move the gear lever, and lubricating system for the rough engine noise. The cause of engine malfunction is dirty diesel filter, vehicle acceleration malfunction is due to the clutch plate wear out. Difficulty to move the gear lever indicates that the clutch slips. Rough engine noise caused by the flow of oil to the engine stalled as the result of dirty oil filter. The results of the logic tree analysis show that for each failure requires scheduling of time directed task.

  10. Characterisation of vibration input to flywheel used on urban bus

    Science.gov (United States)

    Wang, L.; Kanarachos, S.; Christensen, J.

    2016-09-01

    Vibration induced from road surface has an impact on the durability and reliability of electrical and mechanical components attached on the vehicle. There is little research published relevant to the durability assessment of a flywheel energy recovery system installed on city and district buses. Relevant international standards and legislations were reviewed and large discrepancy was found among them, in addition, there are no standards exclusively developed for kinetic energy recovery systems on vehicles. This paper describes the experimentation of assessment of road surface vibration input to the flywheel on a bus as obtained at the MIRA Proving Ground. Power density spectra have been developed based on the raw data obtained during the experimentation. Validation of this model will be carried out using accelerated life time tests that will be carried out on a shaker rig using an accumulated profile based on the theory of fatigue damage equivalence in time and frequency domain aligned with the model predictions.

  11. DESIGN OF TRANSITION TIME ADJUSTMENT TECHNIQUE FOR REDUCING BUS DELAY EFFECTS ON NOC INTERCONNECTS

    Directory of Open Access Journals (Sweden)

    MEERA K S

    2013-04-01

    Full Text Available To meet the growing computation-intensive applications the number of computing resources in single-chip has enormously increased, because current VLSI technology can support such an extensive integration of transistors. By adding many computing resources such as CPU, DSP, specific IPs, etc to build a system in System-on-Chip, its interconnection between each other becomes another challenging issue. In most System-on-Chip applications, a shared bus interconnection which needs arbitration logic to serialize several bus access requests, is adopted to communicate with each integrated processing unit because of its low-cost and simple control characteristics. However, such shared bus interconnection has some limitation in its scalability because only one master at a time can utilize the bus which means all the bus accesses should be serialized by the arbitrator. Therefore, in such an environment where the number of bus requesters is large and their required bandwidth for interconnection is more than the current bus, some other interconnection methods should be considered. Such scalable bandwidth requirement can be satisfied by using on-chip packet-switched micro-network of interconnects, generally known as Network-on-Chip (NoC architecture. It suffers however from increasingly serious interconnect crosstalk effects, which constrain the overall performance of NOC systems. In this paper some delay tolerance methods are proposed.

  12. Implementation of an AMBA Advanced High Performance Bus protocol IP block

    Directory of Open Access Journals (Sweden)

    Mahendra Vucha Sandeep Magarde

    2011-08-01

    Full Text Available The design of an AMBA advanced high performance bus (AHB protocol IP block is presented in this paper. The AHB (Advanced High-performance Bus is a high-performance bus in AMBA (Advanced Microcontroller Bus Architecture family. This AHB can be used in high clock frequency system modules. The AHB acts as the high-performance system backbone bus. AHB supports the efficient connection of processors, on-chip memories and off-chip external memory interfaces with low-power peripheral macro cell functions. In this work, the design of the Advanced High-Performance Bus Protocol is developed which has the basic blocks such as Master and Slave. The arbitration mechanism is used to ensure that only one master has access to the bus at any one time and the AHB decoder is used to decode the address of each transfer and provide a select signal for the slave that is involved in the transfer. This AMBA-AHB protocol can be adopted in all the application provided the design should be an AHB compliant.

  13. Air flow through a non-airconditioned bus with open windows

    Indian Academy of Sciences (India)

    S R Kale; S V Veeravalli; H D Punekar; M M Yelmule

    2007-08-01

    Open window buses without air-conditioning are a major mode of urban and inter-city transport in most countries. High occupancy combined with hot and humid conditions makes travel in these buses quite uncomfortable. In this study air flow through a bus has been studied that could be the basis for low cost and ecofriendly methods of increasing passenger comfort and possibly reduce drag. The aerodynamics of such a road vehicle has not been studied as previous investigations have been confined to vehicles with closed windows that present a smooth exterior to air flow. Using a 1:25 scaled Perspex model of an urban bus in Delhi, flow visualization was performed in a water channel. The Reynolds numbers were onetenth of a real bus moving at $10 m/s$. Smoke and tuft visualizations were also performed on an urban bus at 40 km/h. Numerical simulations were performed at the actual Reynolds number. Even though there were Reynolds number differences, the broad features were similar. Air enters the bus from the rear windows, moves to the front (relative to the bus) and exits from the front windows. Inside air velocity relative to the bus is about one-tenth of the free-stream velocity. The flow is highly three-dimensional and unsteady.

  14. The Intelligent Bus stop Based on Mobile Communication Location%基于移动通讯定位的智能公交站牌

    Institute of Scientific and Technical Information of China (English)

    毕学卓; 王媛媛; 陈洁

    2015-01-01

    At present,the structure of the domestic bus stop is simple and the content is single. It can only show the bus number and driving direction. You can not get the correct vehicle information at any time,as a result of which they can only passively waiting for the bus. To solve this problem,we design an intelligent electronic bus stop sign which can solve the above problems effectively. It has the the whole function and the large scalable space. People can know the real-time dynamic information by this electronic buses stop sign. It realized information communication between passengers and the bus driver through the wireless transceiver device,so that people travel more convenient. The 12C5A60S2 microcon-troller is the core of the system. Through its powerful micro-controlled processing capabilities,LED displaying technolo-gy and the networking technology,Intelligent transportation can be realized.%目前国内公交系统的站牌结构简单,内容单一,仅显示公交车次和行车路线,无法了解车辆的实时信息,乘客只能被动地等车。针对这一问题,本文设计了智能公交电子站牌,可以有效解决上述问题,且功能比较全面,可扩展的空间大。人们可以通过电子站牌知道途经该站点的公交车辆的实时动态信息,并且利用无线收发装置实现乘客与公交司机的信息沟通,使人们的出行更加方便。该系统以12C5A60S2单片机为核心,通过其强大的微控处理功能与LED显示技术、物联网技术,实现智慧公交。

  15. Entangling a Series of Trapped Ions by Moving Cavity Bus

    Institute of Scientific and Technical Information of China (English)

    ZHANG Miao; JIA Huan-Yu; WEI Lian-Fu

    2011-01-01

    Entangling multiple qubits is one of the central tasks of quantum information processing. We propose an approach to entangle a number of cold ions (individually trapped in a string of microtraps) by a moved cavity. The cavity is pushed to include the ions one by one with a uniform velocity and thus the information stored in former ions could be transferred to the latter ones by such a moving cavity bus. Since the positions of the trapped ions are precisely located, the strengths and durations of the ion-cavity interactions can be exactly controlled. As a consequence, by properly setting the relevant parameters, typical multi-ion entangled states, e.g., W state for 10 ions, could be deterministically generated. The feasibility of the proposal is also discussed.%@@ Entangling multiple qubits is one of the central tasks of quantum information processing.We propose an approach to entangle a number of cold ions (individually trapped in a string of microtraps) by a moved cavity.The cavity is pushed to include the ions one by one with a uniform velocity and thus the information stored in former ions could be transferred to the latter ones by such a moving cavity bus.Since the positions of the trapped ions are precisely located, the strengths and durations of the ion-cavity interactions can be exactly controlled.As a consequence, by properly setting the relevant parameters, typical multi-ion entangled states, e.g., W state for 10 ions, could be deterministically generated.The feasibility of the proposal is also discussed.

  16. On the road : non-fossil fuel deployment for the public bus fleet of Sweden

    OpenAIRE

    Xylia, Maria; Silveira, Semida

    2015-01-01

    The public transport sector in Sweden has set a target to run 90% of its total vehicle-kilometers on renewable fuels by 2020, and double its market share in the long term. The focus of this paper is the adoption of renewable fuels in public bus fleets. Data for all 21 Swedish counties were gathered and analyzed, mapping the bus fleets’ condition in relation to renewable fuel deployment, CO2 emissions and energy efficiency. The main factors affecting fuel choices in the bus fleets were investi...

  17. Design of the HEAO main bus shunt regulator. [High Energy Astronomical Observatory solar array

    Science.gov (United States)

    Middlebrook, R. D.; Kimble, S. G.

    1976-01-01

    The High Energy Astronomy Observatory (HEAO) is being built for NASA by an American company. The general requirements concerning the HEAO main bus regulator are examined. The bus regulated voltage is 33 V, the maximum shunt current is 45 A, and the regulator output impedance is to be less than 0.5 Ohm from dc to 100 kHz. Loop gain design considerations for the main bus regulator are discussed and a description is given of the general device configuration. Attention is also given to regulator loop design and performance.

  18. A Communication-Less Distributed Voltage Control Strategy for a Multi-Bus AC Islanded Microgrid

    DEFF Research Database (Denmark)

    Wang, Yanbo; Tan, Yongdong; Chen, Zhe;

    2014-01-01

    This paper presents a communication-less distributed voltage control strategy for a multi-bus AC islanded microgrid. First, a Kalman Filter-based network voltage estimator is proposed to obtain voltage responses without communication links in the presence of load disturbances. Then, a voltage...... (Distributed Generator) unit rather than relying on any communication facilities; (2) In contrast to the conventional PI-based voltage control method, the proposed voltage control strategy can implement not only offset-free control for single-bus, but also optimal control for multi-bus. Thus the flexibility...

  19. Fast wave current drive

    Energy Technology Data Exchange (ETDEWEB)

    Goree, J.; Ono, M.; Colestock, P.; Horton, R.; McNeill, D.; Park, H.

    1985-07-01

    Fast wave current drive is demonstrated in the Princeton ACT-I toroidal device. The fast Alfven wave, in the range of high ion-cyclotron harmonics, produced 40 A of current from 1 kW of rf power coupled into the plasma by fast wave loop antenna. This wave excites a steady current by damping on the energetic tail of the electron distribution function in the same way as lower-hybrid current drive, except that fast wave current drive is appropriate for higher plasma densities.

  20. Bench Marking of Alternate Soft-charging Circuits for Variable-frequency Drives

    Directory of Open Access Journals (Sweden)

    S. Anandh

    2015-07-01

    Full Text Available This study presents about various soft charging techniques used in variable frequency drives to limit the in-rush current into the dc-bus capacitors during pre-charging condition. The main objective of a pre-charging circuit is to charge the capacitor within possible allowed time and maximum converter current without any voltage overshoot. A capacitor pre-charging circuit needs to be robust and simple in control by limiting the dc link inductor and input ac current to any desired magnitude. In this study we will discuss about various soft charging topologies, techniques and their performance during different operating conditions such as partially pre-charged capacitors, input line voltage variation, ground faults and bus faults. In the final this study discusses also about a novel pre-charging circuit, technique and provides a comparison of proposed technique with the existing techniques.

  1. Driving in a womb

    NARCIS (Netherlands)

    Anonymous

    Drive thousands of kilometres on just a litre of fuel? During the annual Shell eco-marathon at the end of May, schoolchildren and students – including a team from TU Delft – demonstrated that it can indeed be done.

  2. Drinking and driving

    OpenAIRE

    2003-01-01

    Alcohol misuse generates many health and social problems at a cost that society is increasingly unwilling to sustain. One of the most tragic consequences of alcohol misuse is the result of drinking and driving. Each week, impaired drivers kill 40 Canadian men, women and children and injure 1250 others. The Canadian Medical Association (CMA), in its campaign against drinking and driving, has recommended that a condition of obtaining or renewing a driver's licence include the individual's writt...

  3. Instant Google Drive starter

    CERN Document Server

    Procopio, Mike

    2013-01-01

    This book is a Starter which teaches you how to use Google Drive practically. This book is perfect for people of all skill levels who want to enjoy the benefits of using Google Drive to safely store their files online and in the cloud. It's also great for anyone looking to learn more about cloud computing in general. Readers are expected to have an Internet connection and basic knowledge of using the internet.

  4. Direct drive wind turbine

    Science.gov (United States)

    Bywaters, Garrett; Danforth, William; Bevington, Christopher; Jesse, Stowell; Costin, Daniel

    2007-02-27

    A wind turbine is provided that minimizes the size of the drive train and nacelle while maintaining the power electronics and transformer at the top of the tower. The turbine includes a direct drive generator having an integrated disk brake positioned radially inside the stator while minimizing the potential for contamination. The turbine further includes a means for mounting a transformer below the nacelle within the tower.

  5. Self-driving carsickness.

    Science.gov (United States)

    Diels, Cyriel; Bos, Jelte E

    2016-03-01

    This paper discusses the predicted increase in the occurrence and severity of motion sickness in self-driving cars. Self-driving cars have the potential to lead to significant benefits. From the driver's perspective, the direct benefits of this technology are considered increased comfort and productivity. However, we here show that the envisaged scenarios all lead to an increased risk of motion sickness. As such, the benefits this technology is assumed to bring may not be capitalised on, in particular by those already susceptible to motion sickness. This can negatively affect user acceptance and uptake and, in turn, limit the potential socioeconomic benefits that this emerging technology may provide. Following a discussion on the causes of motion sickness in the context of self-driving cars, we present guidelines to steer the design and development of automated vehicle technologies. The aim is to limit or avoid the impact of motion sickness and ultimately promote the uptake of self-driving cars. Attention is also given to less well known consequences of motion sickness, in particular negative aftereffects such as postural instability, and detrimental effects on task performance and how this may impact the use and design of self-driving cars. We conclude that basic perceptual mechanisms need to be considered in the design process whereby self-driving cars cannot simply be thought of as living rooms, offices, or entertainment venues on wheels. PMID:26446454

  6. Epilepsy and driving

    Directory of Open Access Journals (Sweden)

    Moetamedi M

    2000-09-01

    Full Text Available Epilepsy is a disease with high prevalence, which interferes driving and may lead to car accident; This case-control study has been done on 100 epileptic patients and 100 persons as control group, who had history of driving. We gathered our patients with face to face interview and registering their information in special forms which were prepared for this study. There were three times more accidents among epileptic cases comparing with control group and this difference was more considerable in men and in patients under 35 years old. The cause of accident were not seizure attack in more than 60% of the patients and these ordinary accidents were also more in case group. Epileptic patients with history of car accidents during driving had poor drug compliance comparing with the epileptics without history of an accident so drug compliance may be valuable in predicting accident in these patients. We have also found poor drug compliance in whom seizure attacks caused accident for them. 58% of the epileptics had not consulted their physician about driving. 43.3% of seizures during driving were of generalized type and none of the patients had inform police about their disease during getting driving license.

  7. Dementia and driving.

    Science.gov (United States)

    O'Neill, D; Neubauer, K; Boyle, M; Gerrard, J; Surmon, D; Wilcock, G K

    1992-04-01

    Many European countries test cars, but not their drivers, as they age. There is evidence to suggest that human factors are more important than vehicular factors as causes of motor crashes. The elderly also are involved in more accidents per distance travelled than middle-aged drivers. As the UK relies on self-certification of health by drivers over the age of 70 years, we examined the driving practices of patients with dementia attending a Memory Clinic. Nearly one-fifth of 329 patients with documented dementia continued to drive after the onset of dementia, and impaired driving ability was noted in two-thirds of these. Their families experienced great difficulty in persuading patients to stop driving, and had to invoke outside help in many cases. Neuropsychological tests did not help to identify those who drove badly while activity of daily living scores were related to driving ability. These findings suggest that many patients with dementia drive in an unsafe fashion after the onset of the illness. The present system of self-certification of health by the elderly for driver-licensing purposes needs to be reassessed.

  8. Self-driving carsickness.

    Science.gov (United States)

    Diels, Cyriel; Bos, Jelte E

    2016-03-01

    This paper discusses the predicted increase in the occurrence and severity of motion sickness in self-driving cars. Self-driving cars have the potential to lead to significant benefits. From the driver's perspective, the direct benefits of this technology are considered increased comfort and productivity. However, we here show that the envisaged scenarios all lead to an increased risk of motion sickness. As such, the benefits this technology is assumed to bring may not be capitalised on, in particular by those already susceptible to motion sickness. This can negatively affect user acceptance and uptake and, in turn, limit the potential socioeconomic benefits that this emerging technology may provide. Following a discussion on the causes of motion sickness in the context of self-driving cars, we present guidelines to steer the design and development of automated vehicle technologies. The aim is to limit or avoid the impact of motion sickness and ultimately promote the uptake of self-driving cars. Attention is also given to less well known consequences of motion sickness, in particular negative aftereffects such as postural instability, and detrimental effects on task performance and how this may impact the use and design of self-driving cars. We conclude that basic perceptual mechanisms need to be considered in the design process whereby self-driving cars cannot simply be thought of as living rooms, offices, or entertainment venues on wheels.

  9. Dangers of Texting While Driving

    Science.gov (United States)

    ... and share information, we created a dedicated website . Distracted Driving Information Clearinghouse In addition, to collect and share ... technology that could potentially reduce the problem of distracted driving, the Commission’s staff created the FCC Distracted Driving ...

  10. Bus Stops, Published in 2008, 1:1200 (1in=100ft) scale, Brown County, WI.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Bus Stops dataset, published at 1:1200 (1in=100ft) scale, was produced all or in part from Field Survey/GPS information as of 2008. Data by this publisher are...

  11. Research on urban public traffic network with multi-weights based on single bus transfer junction

    Science.gov (United States)

    An, Xin-lei; Zhang, Li; Zhang, Jian-gang

    2015-10-01

    Regarding single bus transfer junction as a research object, this paper constructs the urban traffic network models with multi-weights taking different bus lines in bus transfer junction as the network nodes, that is, the urban traffic network with multi-weights is given different properties weights at every edge. According to the method of network split, the complex network with multi-weights is split into several different single weighted complex networks. Then, we study the global synchronization of the new network model by changing congestion degrees, transfers coefficient and passenger flow density between different bus lines. Finally, analytical and simulated results are given to show the impact of different properties weights to the public traffic network balance.

  12. Survival analysis of car travel time near a bus stop in developing countries

    Institute of Scientific and Technical Information of China (English)

    YANG XiaoBao; GAO ZiYou; GUO HongWei; HUAN Mei

    2012-01-01

    This paper presents an important investigation into car travel time affected by mixed traffic flow near a bus stop on the basis of survival analysis theory.Travel time data associated with mixed traffic characteristics near a bus stop were collected by video cameras.A hazard-based duration model was introduced to analyze the effects of mixed traffic flow on car travel time.The results indicate that mixed traffic flow impacts car travel time significantly.And the presence of bus berthing violation would delay car travel time.The proposed model can be used to forecast temporal shifts in car travel time due to changes in mixed traffic flow.The influential factors related to mixed traffic flow should be given full consideration in the planning and designing of bus stops in developing countries.

  13. Analysis of Journey to Work Travel Behavior by Car and Bus in the Sydney Metropolitan Region

    Directory of Open Access Journals (Sweden)

    Suthanaya P.A.

    2011-01-01

    Full Text Available Car dependence is a fundamental problem in the sustainability of cities with low-density suburban sprawl. Increasing the use of public transport is one of the policy objectives commonly adopted to overcome this problem. It is essential to study journey to work travel behavior by car and bus. This paper applied preference function to analyze travel behavior and Moran’s I spatial statistic to evaluate the spatial association. The results indicated that the commuting preferences of residents have moved towards distance maximization. In general, bus was preferred for shorter distance trips whilst car was preferred for longer distance trips. Unlike car, by increasing distances from the Central Business District, residents tended to use bus for shorter distance trip. A significant positive spatial association was identified for both the slope preferences by car and bus where zones with a preference towards longer or shorter trips tended to travel to zones with similar preferences.

  14. USGS Small-scale Dataset - Railroad and Bus Passenger Stations of the United States 201207 Shapefile

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This map layer shows Amtrak intercity railroad and bus passenger terminals in the United States. There are no Amtrak stations in Alaska or Hawaii. The data are a...

  15. A Comparative Analysis of Different Arbitration Protocols for Multiple—Bus Multiprocessors

    Institute of Scientific and Technical Information of China (English)

    庄旗铭; 杨庆; 等

    1996-01-01

    Earlier performance studies of multiple-bus multiprocessor systems assume a random selection of competing requests for bus assignment and ignore the effects of realistic bus arbitraion schemes on the performance of such systems.In this paper,we present performance analysis of the multiple-bus systems with different arbitration protocols.The priority protocols considered are random selection,fixed priority,rotating priority,round-robin and FIFO.Analytical models are developed for each of these five different priority protocols.Each of our analyses models exactly the behavior of the corresponding priority protocol with little computation cost.The analytical models are validated through extensive simulations and are them used to carry out performance analysis and comparison of different priority protocols.Numerical results obtained from our models show that the round-robin protocol performs the best amont the five protocols in the system with a few buses.

  16. Bus Routes, Published in 2006, 1:100000 (1in=8333ft) scale, Atlanta Regional Commission.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Bus Routes dataset, published at 1:100000 (1in=8333ft) scale, was produced all or in part from Other information as of 2006. Data by this publisher are often...

  17. Annoyance evaluation and the effect of noise on the health of bus drivers

    Directory of Open Access Journals (Sweden)

    Portela S Bruno

    2013-01-01

    Full Text Available In the present study, we evaluated annoyance and the effects of noise on the health of bus drivers. For that, 200 bus drivers from a public transport company participated in a cross-sectional study. Annoyance and effects on health was measured with analog scale: Sleep quality, occurrence of tinnitus, headache, irritation, and annoyance from bus engine, traffic, and passengers. Data of age and working time of bus drivers also were obtained. For noise exposure, LA eq was evaluated in 80 buses. Statistical analysis consisted of mean, standard deviation, minimum, and maximum, Kruskal-Wallis test with post-hoc Dunn, one-way ANOVA with post-hoc Tukey and Spearman′s correlation coefficient. Results indicate three groups of bus drivers (not annoyed: (N.A., a little annoyed (L.A. and highly annoyed (H.A.. The group H.A. was younger and with less working time in relation to others, with a significant difference only for age. Regarding sleep quality, there was no significant difference. For results on the occurrence of tinnitus, headache and irritation after work, group H.A. had significantly higher means. Result of annoyance to the bus engine was significantly higher in H.A. than in L.A. and N.A. Annoyance to traffic and passengers, no significant differences were found, but the highest results were found for L.A., followed by H.A. and N.A. Equivalent sound pressure level in buses was above of the limit for occupational comfort. It was concluded that bus drivers has considerable level of noise annoyance and some health effects are perceived. The noise is a factor discomfort ergonomic that may cause effects on health of bus drivers. This study aims to evaluate annoyance and the effects of noise on the health of bus drivers. Cross-sectional study with buses and bus drivers. For that, 200 bus drivers from a public transport company participated in a cross-sectional study. Annoyance and effects on health was measured with analog scale: Sleep quality

  18. Railroad and Bus Passenger Stations of the United States - Direct Download

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This map layer shows Amtrak intercity railroad and bus passenger terminals in the United States. There are no Amtrak stations in Alaska or Hawaii. The data are a...

  19. Microprocessor based dual bus structured data acquisition and processing system : DAPS-80

    International Nuclear Information System (INIS)

    The microprocessor based dual bus structured data acquisition and processing system has been designed around Intel 8080 microprocessor. The system is described and operational results are given. (M.G.B.)

  20. Exploring public bus service quality in South Africa: A structural equation modelling approach

    Directory of Open Access Journals (Sweden)

    Ayanda M. Vilakazi

    2014-03-01

    Full Text Available This study, which is a deviation from the usual practice of using SERVQUAL or an adaptedversion thereof, uses McKnight, Pagano and Paaswell’s (1986 service quality dimensions,namely reliability; extent of service; comfort; safety; and affordability (RECSA and structuralequation modelling to determine commuters’ perception of public bus service quality in amajor city in South Africa. The RECSA model was adapted and fitted to the data collectedfrom a convenience sample of bus commuters in Johannesburg, using structural equationmodelling. It was ascertained that reliability, service, comfort and safety influenced thepublic bus commuters’ perception of the overall service quality. The implications of theaforementioned findings for providers of public bus services are explained.

  1. A perception system for accurate automatic control of an articulated bus

    OpenAIRE

    Salinas, Carlota; Montes, Héctor; Armada, Manuel

    2010-01-01

    This paper describes the perception system for an automatic articulated bus where an accurate tracking trajectory is desired. Among the most promising transport infrastructures of the autonomous or semi-autonomous transportation systems, the articulated bus is an interesting low cost and friendly option. This platform involves a mobile vehicle and a private circuit inside CSIC premises. The perception system, presented in this work, based on 2D laser scanner as a prime sensor generates local ...

  2. Using FTT-CAN to the Flexible Control of Bus Redundancy and Bandwidth Usage

    OpenAIRE

    Silva, Valter; Fonseca, José; Ferreira, Joaquim

    2006-01-01

    Controller Area Network (CAN) is a popular and very well-known bus system, both in academia and in industry, initially targeted to automotive applications as a single digital bus to replace the wiring that were growing complexity, weight and cost with the advent of new automotive appliances. However, requirements have evolved and CAN’s dependability and bandwidth limitations led to the emergence of alternative networks such as FlexRay and TTP/C. Nevertheless, we believe that it...

  3. The Ruggedized STD Bus Microcomputer - A low cost computer suitable for Space Shuttle experiments

    Science.gov (United States)

    Budney, T. J.; Stone, R. W.

    1982-01-01

    Previous space flight computers have been costly in terms of both hardware and software. The Ruggedized STD Bus Microcomputer is based on the commercial Mostek/Pro-Log STD Bus. Ruggedized PC cards can be based on commercial cards from more than 60 manufacturers, reducing hardware cost and design time. Software costs are minimized by using standard 8-bit microprocessors and by debugging code using commercial versions of the ruggedized flight boards while the flight hardware is being fabricated.

  4. Loss of power of a 220 VAC safety bus bar at Embalse NPP

    International Nuclear Information System (INIS)

    Embalse nuclear power plant is located at the Cordoba Province, 5 kilometres Southern the town of Embalse. It is equipped with one 600 MWe CANDU reactor. At the time of the event, which occurred on 11 October 2004, the plant was operating normally at full power. The Embalse nuclear power plant electrical power system buses are classified, in reliability decreasing order, into the following four different levels: 1) Class I: uninterrupted direct current supplies for safety related and other essential loads; 2) Class II: uninterrupted alternating current supplies for safety related and other essential loads; 3) Class III: alternating current supplies to essential auxiliaries which can tolerate the short interruption required until to start up and load the on-site standby generators and 4) Class IV: normal alternating current supplies to auxiliaries which can tolerate long duration interruptions without affecting personnel or equipment safety (Class IV is the normal source of power to Class III system). In particular, the Class II 220 VAC uninterrupted monophasic safety bus bars are composed by three 220 VAC subsystems powered by the following two sources of power: Class I uninterrupted safety bus bars (5551 BUA, BUB and BUC bars) and Class III secondary distribution 5433-MCC5 and MCC6. The Class II 220 VAC bus bars are normally powered from Class I bus bars through static monophasic inverters. Beside, in a static monophasic out of service case, Class II bus bar affected could be powered from Class III bus bars via a transformer stabilizer. Class II bus bars supplies power to both control computers and the AC instrumentation and control devices. When 220 VAC (Class II) 5542-BUC-monophasic-inverter failure was coincident with a subsequent independent failure to transfer to the Class III through static commuter 5542-SVR-C, a loss of the 220 VAC uninterrupted monophasic safety bus bar (Class II) event was caused. (author)

  5. Congestion Management by TCPST In IEEE 9 Bus System Using Matlab Simulink.

    OpenAIRE

    Amit Sharma; Ram Avtar Jaswal

    2013-01-01

    Increased electric power consumption causes transmission lines to be driven close to or even beyond their transfer capacities resulting in overloaded lines and congestions. Flexible AC Transmission Systems (FACTS) provide an opportunity to resolve congestions by controlling power flows and voltages. Main focus in this paper lies on the Thyristor Controlled Phase Shift Transformer (TCPST). IEEE 9 bus system is considered for congestion management. Parameters for bus system are predefined by IE...

  6. Central Thermal Bus for Micro and Small Satellites: Scalability and Adaptability

    OpenAIRE

    Wooldridge, John; Wrenn, Kim; Wolf, Dave; Bugby, Dave; Krein, Steve; Mark, Dan

    2005-01-01

    Swales Aerospace is engaged in the development of a Centralized Thermal Bus (CTB), which stands to significantly increase the capability, flexibility, and scalability of a small or micro-sat bus. The CTB is a multievaporator hybrid loop heat pipe (MEHLHP). It combines the best qualities of both capillary pumped loops and loop heat pipes while improving operational robustness, simplifying mission modes and system deployment/startup. Key benefits of the CTB are: multiple load heat transport, he...

  7. PERFORMANCE ASSESSMENT OF PRODUCT DEVELOPMENT PROCESS IN A BUS COMPANY: A CASE STUDY

    OpenAIRE

    Tiago Ribeiro de Araújo; Fernanda Cristina Pierre

    2014-01-01

    This article aims to examine the application of a method for assessing the performance of the product development process (PDP) through the assessment of managerial skills in a bus body industry. A case study was carried out and a PDP method was applied through a questionnaire addressing the PDP management skills according to Dechamps and Nayak (1997) model and validated by Silva (2001) in a bus body company which showed all the features available in the literature on industria...

  8. The impact of bus drivers ’ lifestyle on the occurrence of health problems and absenteeism

    Directory of Open Access Journals (Sweden)

    Andrej Jerman

    2016-06-01

    Full Text Available Research Question: Do bus drivers’ lifestyles affect the occurrence of health problems and absenteeism? Purpose: The purpose of the study was to determine whether the lifestyle of professional bus drivers affects the occurrence of health problems and the phenomenon of absenteeism. Method: A quantitative research method was used in the research. Data were collected using a structured questionnaire, on a sample of 230 professional bus drivers from different bus transport companies in Slovenia. Selected data were analyzed with chi-square test and multiple regression analysis. Results: We determined that there is a relationship between the state of health of professional bus drivers and participation in sport activity and that there is a statistically significant impact of lifestyle on the absenteeism of professional bus drivers. Organization: The study points to the necessity of management’s awareness to improve the conditions for the health status of employees and, consequently, absenteeism. Managers need to be more vigilant in ensuring conditions and social security that will allow employees a higher quality lifestyle. Society: The poor quality lifestyle of professional bus drivers, which includes different addictions, inadequate physical activity, and poor working conditions, is a significant factor causing absenteeism. All these factors influence the onset of negative consequences, such as the direct cost of compensation payments, costs of replacing the absent person, a reduction in productivity, which in turn affect economic growth and the high cost of health care. Originality: This is the first focus group study of professional bus drivers that targets lifestyle and its connection to absenteeism. Limitations/Future Research: The main limitation of the study is the number of respondents. The reason for this is that professional drivers are less responsive in the survey and that the study was conducted only in Slovenia, country of two

  9. Calculation of Flexible Bus-Bars Electrodynamic Stability with Application of Implicit Scheme

    OpenAIRE

    Y. G. Panamarenka

    2008-01-01

    A numerical method for calculation of open-air substations’ flexible bus-bars dynamic at short-circuit has been improved on equations of a flexible elastic string with application of an implicit scheme. On the basis of the numerical method a computer program FLEBUS for calculation of substations’ flexible bus-bars dynamic at short-circuit has been developed. An approbation and an estimation of calculation result reliability have been carried out in accordance with the program while using expe...

  10. Mechanical analysis of the main bus bars in the DFBA shuffling modules

    CERN Document Server

    Ramos, D

    2012-01-01

    The main bus bars (13 kA) inside the shuffling modules of the distribution feed boxes powering the LHC arcs (DFBA) are subjected to high Lorentz forces. The structural behaviour of the bus bars under such forces is here analysed. The results are discussed with respect to a risk of structural failure due to excessive deformation or degradation of the electrical insulation by repeated contact with other surfaces.

  11. External validation of psychological job demands in a bus driver sample

    OpenAIRE

    Gimeno, D; Benavides, F G; Mira, M.; Martinez, J. M.; Benach, J

    2004-01-01

    Psychosocial risk factors have been considered as characteristics of the work environment rather than an individual issue, but their presence in the workplace is usually measured by self-reported questionnaires, based on worker attitudes. The objective of the study was to compare a self-reported measure of psychological job demands in a bus driver sample with selected indicators of bus company activity, as external 'objective' indicators, in order to assess its external validity. The final sa...

  12. 基于CAN总线的电动客车空调控制方案%Air-conditioner Control Project for Electric Bus Based on CAN Bus

    Institute of Scientific and Technical Information of China (English)

    杨桥生

    2012-01-01

    The author simply introduces two kinds of present control modes for air-conditioner of electric bus in domestic market,puts forward a new kind of its control mode based on CAN bus,and design the CAN's messages reports.%简述国内电动客车空调的两种控制模式;提出一种基于CAN总线的电动客车空调控制模式,并设计CAN通讯报文。

  13. ETHERBONE - a network layer for the wishbone SoC bus

    International Nuclear Information System (INIS)

    Today, there are several System on a Chip (SoC) bus systems. Typically, these buses are confined on-chip and rely on higher level components to communicate with the outside world. Taking these systems a step further, we see the possibility of extending the reach of the SoC bus to remote FPGAs or processors. This leads to the idea of the EtherBone (EB) core, which connects a Wishbone (WB) Ver. 4 Bus via a Gigabit Ethernet based network link to remote peripheral devices. EB acts as a transparent interconnect module towards attached WB Bus devices. Address information and data from one or more WB bus cycles is preceded with a descriptive header and encapsulated in a UDP/IP packet. Because of this standard compliance, EB is able to traverse Wide Area Networks and is therefore not bound to a geographic location. Due to the low level nature of the WB bus, EB provides a sound basis for remote hardware tools like a JTAG debugger, In-System-Programmer (ISP), boundary scan interface or logic analyser module. EB was developed in the scope of the White-Rabbit Timing Project (WR) at CERN and GSI/FAIR, which employs GigaBit Ethernet technology to communicate with memory mapped slave devices. WR will make use of EB as means to issue commands to its timing nodes and control connected accelerator hardware. (authors)

  14. An analytical algorithm to determine allowable ampacities of horizontally installed rectangular bus bars

    Directory of Open Access Journals (Sweden)

    Klimenta Dardan O.

    2016-01-01

    Full Text Available The main objective of this paper is to propose an algorithm for the determination of the allowable ampacities of single rectangular-section bus bars without the occurrence of correction factors. Without correction factors, the ampacity computation of the copper and aluminium bus bars is fully automatized. The analytical algorithm has been implemented in a computer program code that along with the allowable ampacity can compute the bus bar temperature and the individual heat transfer coefficient for each side of the bus bar, as well as their corresponding power losses. Natural and forced convection correlations for rectangular bus bars are applied. Effects of the solar radiation and radiation heat losses from the bus bar surface are taken into consideration as well. The finite element method (FEM has been used for the linear/non-linear steady-state thermal analysis, i.e. for validation of the analytical algorithm. All FEM-based numerical computations were carried out using the COMSOL Heat Transfer Module. [Projekat Ministarstva nauke Republike Srbije, br. TR33046

  15. Exact and Metaheuristic Approaches for a Bi-Objective School Bus Scheduling Problem.

    Science.gov (United States)

    Chen, Xiaopan; Kong, Yunfeng; Dang, Lanxue; Hou, Yane; Ye, Xinyue

    2015-01-01

    As a class of hard combinatorial optimization problems, the school bus routing problem has received considerable attention in the last decades. For a multi-school system, given the bus trips for each school, the school bus scheduling problem aims at optimizing bus schedules to serve all the trips within the school time windows. In this paper, we propose two approaches for solving the bi-objective school bus scheduling problem: an exact method of mixed integer programming (MIP) and a metaheuristic method which combines simulated annealing with local search. We develop MIP formulations for homogenous and heterogeneous fleet problems respectively and solve the models by MIP solver CPLEX. The bus type-based formulation for heterogeneous fleet problem reduces the model complexity in terms of the number of decision variables and constraints. The metaheuristic method is a two-stage framework for minimizing the number of buses to be used as well as the total travel distance of buses. We evaluate the proposed MIP and the metaheuristic method on two benchmark datasets, showing that on both instances, our metaheuristic method significantly outperforms the respective state-of-the-art methods. PMID:26176764

  16. Exact and Metaheuristic Approaches for a Bi-Objective School Bus Scheduling Problem.

    Directory of Open Access Journals (Sweden)

    Xiaopan Chen

    Full Text Available As a class of hard combinatorial optimization problems, the school bus routing problem has received considerable attention in the last decades. For a multi-school system, given the bus trips for each school, the school bus scheduling problem aims at optimizing bus schedules to serve all the trips within the school time windows. In this paper, we propose two approaches for solving the bi-objective school bus scheduling problem: an exact method of mixed integer programming (MIP and a metaheuristic method which combines simulated annealing with local search. We develop MIP formulations for homogenous and heterogeneous fleet problems respectively and solve the models by MIP solver CPLEX. The bus type-based formulation for heterogeneous fleet problem reduces the model complexity in terms of the number of decision variables and constraints. The metaheuristic method is a two-stage framework for minimizing the number of buses to be used as well as the total travel distance of buses. We evaluate the proposed MIP and the metaheuristic method on two benchmark datasets, showing that on both instances, our metaheuristic method significantly outperforms the respective state-of-the-art methods.

  17. EtherBone - A Network Layer for the Wishbone SoC Bus

    CERN Document Server

    Kreider, M; Lewis, J; Włostowski, T; Serrano, J

    2011-01-01

    Today, there are several System on a Chip (SoC) bus systems. Typically, these buses are confined on-chip and rely on higher level components to communicate with the outside world. Taking these systems a step further, we see the possibility of extending the reach of the SoC bus to remote FPGAs or processors. This leads to the idea of the EtherBone (EB) core, which connects a Wishbone (WB) Ver. 4 Bus via a Gigabit Ethernet based network link to remote peripheral devices. EB acts as a transparent interconnect module towards attached WB Bus devices. Address information and data from one or more WB bus cycles is preceded with a descriptive header and encapsulated in a UDP/IP packet. Because of this standard compliance, EB is able to traverse Wide Area Networks and is therefore not bound to a geographic location. Due to the low level nature of the WB bus, EB provides a sound basis for remote hardware tools like a JTAG debugger, In-System-Programmer (ISP), boundary scan interface or logic analyser module. EB was de...

  18. Multi Resolution AHB Bus Tracer with Real Time Compression for SOC

    Directory of Open Access Journals (Sweden)

    J. Jagadish Reddy

    2013-01-01

    Full Text Available AMBA (Advanced Microcontroller based Bus Architecture consists of AHB, APB, ASB and AXI. In this project we are Tracing AHB (Advanced High performance Bus signals with Real time Compression and Multi-resolution Techniques. A simple transaction on the AHB consists of an address phase and a subsequent data phase. Access to the target device is controlled through a MUX , thereby admitting bus-access to one bus-master at a time. In AHB Tracer we have to Trace Address signals, Data signals and Control signals, we have to compress them depending on AHB protocols. A multi-resolution AHB on-chip bus tracer is named as SYS_HMRBT (AHB Multi-resolution Bus Tracer and is used for monitoring. The goal is to provide better compression quality and multiple resolution traces to meet the complex SoC debugging needs. Compressing all signals at cycle-accurate-level does not always meet the debugging needs. As SOCs become more complex, the transaction level debugging becomes increasingly important, since it helps designers focus on the functional behaviors, instead of interpreting complex signals. By using this SYS_HMRBT, we can achieve 79%-96% of compression depending on selected resolution mode. Tools Used for this Project are Modelsim for Simulation, and Xilinx ISE II for Synthesis

  19. Bus Travel Willingness under the Condition of Bus Information%公交信息条件下的公交出行意愿研究

    Institute of Scientific and Technical Information of China (English)

    左毅刚; 李文权; 陈茜; 李洁; 郭士永

    2014-01-01

    In-depth analysis of influencing mechanism of bus information on the residents travel mode choice is the theoretical basis of rational planning of urban bus travel information environment ,which has important significance for ur-ban traffic management and congestion mitigation .Based on the theory of planned behavior ,at the basis of three basic variables of behavior attitude ,subjective norm ,perceived behavioral control in the theory of planned behavior ,variables of transit information ,personal attributes and travel experience are added to improve the theory of planned behavior .An improved theory of planned behavior is used to build a bus travel willingness model under the condition of bus Informa-tion .With the Nanjing residents as research object ,a structural equation model is used to verify the survey data in order to determine the interaction between various factors and their impact on the willingness of bus travel .The results show that the bus information has significant and positive impact on bus travel variables of attitude ,subjective norm and per-ceived behavioral control with the influencing coefficients of 0 .533 ,0 .451 and 0 .576 respectively ,and that the bus infor-mation has indirect influence on bus travel willingness and the total effect is 0 .92 ,which shows that high quality of the in-formation can improve the appeal of bus and enhance bus travel willingness of residents .%深入解析公交信息对居民公交出行意愿的影响机理,是合理规划城市公交出行信息环境的理论基础,对于城市交通管理以及交通拥堵的缓解有着重要的意义。基于计划行为理论在行为态度、主观规范、知觉行为控制3个基本变量的基础上加入公交信息、出行经验、个人属性等变量,对计划行为理论加以改进,利用改进的计划行为理论建立公交信息条件下的公交出行意愿模型。以南京市居民为调查研究对象,运用结构方程模型对调查数

  20. Driving anger in Malaysia.

    Science.gov (United States)

    Sullman, Mark J M; Stephens, Amanda N; Yong, Michelle

    2014-10-01

    The present study examined the types of situations that cause Malaysian drivers to become angry. The 33-item version of the driver anger scale (Deffenbacher et al., 1994) was used to investigate driver anger amongst a sample of 339 drivers. Confirmatory factor analysis showed that the fit of the original six-factor model (discourtesy, traffic obstructions, hostile gestures, slow driving, illegal driving and police presence), after removing one item and allowing three error pairs to covary, was satisfactory. Female drivers reported more anger, than males, caused by traffic obstruction and hostile gestures. Age was also negatively related to five (discourtesy, traffic obstructions, hostile gestures, slow driving and police presence) of the six factors and also to the total DAS score. Furthermore, although they were not directly related to crash involvement, several of the six forms of driving anger were significantly related to the crash-related conditions of: near misses, loss of concentration, having lost control of a vehicle and being ticketed. Overall the pattern of findings made in the present research were broadly similar to those from Western countries, indicating that the DAS is a valid measure of driving anger even among non-European based cultures.

  1. [Drug use and driving].

    Science.gov (United States)

    Lemaire-Hurtel, Anne-Sophie; Goullé, Jean-Pierre; Alvarez, Jean-Claude; Mura, Patrick; Verstraete, Alain G

    2015-10-01

    Some drugs are known to impair driving because they can change the vision or hearing, and/or disrupt the intellectual or motor abilities: impaired vigilance, sedation, disinhibition effect, the coordination of movement disorders and the balance. The doctor during prescribing and the pharmacist during deliverance of drug treatment should inform their patients of the potential risks of drugs on driving or operating machinery. The driver has direct responsibility, who hired him and him alone, to follow the medical advice received. The pictograms on the outer packaging of medicinal products intended to classify substances according to their risk driving: The driver can whether to observe simple precautions (level one "be prudent"), or follow the advice of a health professional (level two "be very careful"), or if it is totally not drive (level three "danger caution: do not drive"). This classification only evaluates the intrinsic danger of drugs but not the individual variability. Medicines should be taken into account also the conditions for which the medication is prescribed. It is important to inform the patient on several points. PMID:25956300

  2. Effects of biodiesel on emissions of a bus diesel engine.

    Science.gov (United States)

    Kegl, Breda

    2008-03-01

    This paper discusses the influence of biodiesel on the injection, spray, and engine characteristics with the aim to reduce harmful emissions. The considered engine is a bus diesel engine with injection M system. The injection, fuel spray, and engine characteristics, obtained with biodiesel, are compared to those obtained with mineral diesel (D2) under various operating regimes. The considered fuel is neat biodiesel from rapeseed oil. Its density, viscosity, surface tension, and sound velocity are determined experimentally and compared to those of D2. The obtained results are used to analyze the most important injection, fuel spray, and engine characteristics. The injection characteristics are determined numerically under the operating regimes, corresponding to the 13 mode ESC test. The fuel spray is obtained experimentally under peak torque condition. Engine characteristics are determined experimentally under 13 mode ESC test conditions. The results indicate that, by using biodiesel, harmful emissions (NO(x), CO, smoke and HC) can be reduced to some extent by adjusting the injection pump timing properly. PMID:17350250

  3. Evolution of weighted complex bus transit networks with flow

    Science.gov (United States)

    Huang, Ailing; Xiong, Jie; Shen, Jinsheng; Guan, Wei

    2016-02-01

    Study on the intrinsic properties and evolutional mechanism of urban public transit networks (PTNs) has great significance for transit planning and control, particularly considering passengers’ dynamic behaviors. This paper presents an empirical analysis for exploring the complex properties of Beijing’s weighted bus transit network (BTN) based on passenger flow in L-space, and proposes a bi-level evolution model to simulate the development of transit routes from the view of complex network. The model is an iterative process that is driven by passengers’ travel demands and dual-controlled interest mechanism, which is composed of passengers’ spatio-temporal requirements and cost constraint of transit agencies. Also, the flow’s dynamic behaviors, including the evolutions of travel demand, sectional flow attracted by a new link and flow perturbation triggered in nearby routes, are taken into consideration in the evolutional process. We present the numerical experiment to validate the model, where the main parameters are estimated by using distribution functions that are deduced from real-world data. The results obtained have proven that our model can generate a BTN with complex properties, such as the scale-free behavior or small-world phenomenon, which shows an agreement with our empirical results. Our study’s results can be exploited to optimize the real BTN’s structure and improve the network’s robustness.

  4. MEASURING CUSTOMER’S SATISFACTION ON BUS TRANSPORTATION

    Directory of Open Access Journals (Sweden)

    Rabiul Islam

    2014-01-01

    Full Text Available The purpose of the study is to examine the factors measuring customers’ satisfaction, especially the impact of service quality on customers’ satisfaction in public transportation industry in the university town of Sintok located in Kedah province of Malaysia. In order to assess the relationships between service quality and customer satisfaction survey http://www.scientificjournals.org/journals2007/articles/1003.htmdata were collected from 300 Bus commuters. All hypotheses were tested using Pearson correlations, controlling for the background variables of gender, marital status, ethnicity and education. The results indicate that hypotheses 1 through 5 were supported. Using multiple regressions as a basis for causal paths, a model was developed that examined the influence of all five dimensions of service quality on customers’ satisfaction. The model explained 26.9% of the variance which indicates that 26.9% of the changes in the dependent variable are explained by the independent variables. Altogether, independent variables explained 26.9% of the variations.

  5. Bus Based Synchronization Method for CHIPPER Based NoC

    Directory of Open Access Journals (Sweden)

    D. Muralidharan

    2016-01-01

    Full Text Available Network on Chip (NoC reduces the communication delay of System on Chip (SoC. The main limitation of NoC is power consumption and area overhead. Bufferless NoC reduces the area complexity and power consumption by eliminating buffers in the traditional routers. The bufferless NoC design should include live lock freeness since they use hot potato routing. This increases the complexity of bufferless NoC design. Among the available propositions to reduce this complexity, CHIPPER based bufferless NoC is considered as one of the best options. Live lock freeness is provided in CHIPPER through golden epoch and golden packet. All routers follow some synchronization method to identify a golden packet. Clock based method is intuitively followed for synchronization in CHIPPER based NoCs. It is shown in this work that the worst-case latency of packets is unbearably high when the above synchronization is followed. To alleviate this problem, broadcast bus NoC (BBus NoC approach is proposed in this work. The proposed method decreases the worst-case latency of packets by increasing the golden epoch rate of CHIPPER.

  6. System Interconnect Bus (SIB) compatible multi crate CAMAC Controller (CC)

    International Nuclear Information System (INIS)

    This paper describes design of SIB compatible crate controller with PC interface. SIB is a general-purpose parallel 1/O interface bus used for connecting multi crate system with single PC-interface. The crate controller comprises of a dedicated PC-AT add-on SIB interface card and two width CAMAC module designed to work at station 24 and station 25 of CAMAC crate. PC Interface card (SIBINT) is used for communication between PC/AT host computer and CAMAC Crates. The controller module incorporates a set of registers, logic to generate CAMAC data way timing. Transmission protocol used is RS485 standard. This controller is used for multiple CAMAC crates system, interfaced to PC, using a 60 core twisted pair flat ribbon cable. The crate controller is developed for use in process control, general-purpose data acquisition and control system and laboratory automation. Sustained data transfer rate achieved by controller is 115 Kword/sec each word being 32 bits in length. (author)

  7. Ceramic vane drive joint

    Science.gov (United States)

    Smale, Charles H. (Inventor)

    1981-01-01

    A variable geometry gas turbine has an array of ceramic composition vanes positioned by an actuating ring coupled through a plurality of circumferentially spaced turbine vane levers to the outer end of a metallic vane drive shaft at each of the ceramic vanes. Each of the ceramic vanes has an end slot of bow tie configuration including flared end segments and a center slot therebetween. Each of the vane drive shafts has a cross head with ends thereof spaced with respect to the sides of the end slot to define clearance for free expansion of the cross head with respect to the vane and the cross head being configured to uniformly distribute drive loads across bearing surfaces of the vane slot.

  8. The effects of driver training on simulated driving performance.

    Science.gov (United States)

    Dorn, Lisa; Barker, David

    2005-01-01

    Given that the beneficial effects of driver training on accident risk may not be an appropriate criterion measure, this study investigates whether professionally trained and experienced drivers exhibit safer driving behaviour in a simulated driving task compared with drivers without professional driver training. A sample of 54 police trained drivers and a sample of 56 non-police trained drivers were required to complete two tasks. Firstly to overtake a slow-moving bus on a hazardous stretch of single-lane road with bends and hills and secondly to follow a lead vehicle travelling at 55mph in a built-up section with a speed limit of 30mph. Results showed that in comparison with non-police trained drivers, police drivers were significantly less likely to cross the central division of the road at unsafe locations during the overtaking task and reduced their speed on approach to pedestrians at the roadside in the following task to a greater extent. Police drivers also adopted a more central lane position compared with non-police trained drivers on urban roads and at traffic lights during the following task. Driver group differences in simulated driving performance are discussed with reference to the implications for driver training assessment and skill development. PMID:15607276

  9. Gears and gear drives

    CERN Document Server

    Jelaska, Damir T

    2012-01-01

    Understanding how gears are formed and how they interact or 'mesh' with each other is essential when designing equipment that uses gears or gear trains. The way in which gear teeth are formed and how they mesh is determined by their geometry and kinematics, which is the topic of this book.  Gears and Gear Drives provides the reader with comprehensive coverage of gears and gear drives. Spur, helical, bevel, worm and planetary gears are all covered, with consideration given to their classification, geometry, kinematics, accuracy control, load capacity and manufacturing. Cylindric

  10. Pulsation driving and convection

    Science.gov (United States)

    Antoci, Victoria

    2015-08-01

    Convection in stellar envelopes affects not only the stellar structure, but has a strong impact on different astrophysical processes, such as dynamo-generated magnetic fields, stellar activity and transport of angular momentum. Solar and stellar observations from ground and space have shown that the turbulent convective motion can also drive global oscillations in many type of stars, allowing to study stellar interiors at different evolutionary stages. In this talk I will concentrate on the influence of convection on the driving of stochastic and coherent pulsations across the Hertzsprung-Russell diagram and give an overview of recent studies.

  11. Toyota hybrid synergy drive

    Energy Technology Data Exchange (ETDEWEB)

    Gautschi, H.

    2008-07-01

    This presentation made at the Swiss 2008 research conference on traffic by Hannes Gautschi, director of service and training at the Toyota company in Switzerland, takes a look at Toyota's hybrid drive vehicles. The construction of the vehicles and their combined combustion engines and electric generators and drives is presented and the combined operation of these components is described. Braking and energy recovery are discussed. Figures on the performance, fuel consumption and CO{sub 2} output of the hybrid vehicles are compared with those of conventional vehicles.

  12. 77 FR 35718 - Certain Universal Serial Bus (“USB”) Portable Storage Devices, Including USB Flash Drives and...

    Science.gov (United States)

    2012-06-14

    ... Loyang Industrial Estate, Singapore; Trek Technology (Singapore) Pte. Ltd. of Genting Centre, Singapore; and S-Corn System (S) Pte. Ltd. of Genting Centre, Singapore (collectively, ``Trek''), alleging a...,161. 76 FR 42730 (July 19, 2011). The notice of investigation named as respondents Imation...

  13. CAN总线技术在汽车数字仪表中的应用研究%The Application Research of Digital Automotive Dashboard Based CAN BUS

    Institute of Scientific and Technical Information of China (English)

    赵保华

    2013-01-01

    根据计算机网络技术在汽车应用方面的发展趋势,以汽车数字仪表为对象,引入CAN总线网络技术作为仪表系统的数据传输框架进行设计研究.通过建立CAN总线智能节点,设置仪表系统的显示终端,设计驱动电路与软件并以实时操作系统平台进行多任务安排,最终设计建立了独具特色的数字仪表显示系统,实现了应有的功能.%Based on the application trend of computer network technology in the automotive, the paper takes the car digital instrument as the object, introduces the CAN bus network technology as an instrument system data transmission frame design study. Through the establishment of CAN bus intelligent node, the setting of instrument system design terminal display, driving circuit and software and real-time operating system platform for multi task arrangement, the final unique digital instrument display system is established and its function also realized. The paper content can provide reference for the application of these areas.

  14. Research, development and demonstration of a fuel cell/battery powered bus system. Phase 1, Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-02-28

    Purpose of the Phase I effort was to demonstrate feasibility of the fuel cell/battery system for powering a small bus (under 30 ft or 9 m) on an urban bus route. A brassboard powerplant was specified, designed, fabricated, and tested to demonstrate feasibility in the laboratory. The proof-of-concept bus, with a powerplant scaled up from the brassboard, will be demonstrated under Phase II.

  15. Smoking close to others and butt littering at bus stops: pilot observational study

    Directory of Open Access Journals (Sweden)

    Nick Wilson

    2014-02-01

    Full Text Available Background. Transportation settings such as bus stops and train station platforms are increasingly the target for new smokefree legislation. Relevant issues include secondhand smoke exposure, nuisance, litter, fire risks and the normalization of smoking. We therefore aimed to pilot study aspects of smoking behavior and butt disposal at bus stops. Methods. Systematic observation of smoking and butt disposal by smokers at bus stops. The selection of 11 sites was a mix of convenience and purposeful (bus stops on main routes in two New Zealand cities. Results. During 27 h of observation, a total of 112 lit cigarettes were observed being smoked. Smoking occurred in the presence of: just adults (46%, both young people and adults (44%, just young people (6% and alone (5%. An average of 6.3 adults and 3.8 young people were present at the bus stops while smoking occurred, at average minimum distances of 1.7 and 2.2 m respectively. In bus stops that included an enclosed shelter, 33% of the cigarettes were smoked inside the shelter with others present. Littering was the major form of cigarette disposal with 84% of cigarettes smoked being littered (95% CI; 77%–90%. Also, 4% of disposals were into vegetation, which may pose a fire risk. Conclusions. This pilot study is limited by its small size and various methodological aspects but it appears to be a first attempt to provide observational evidence around smoking at bus stops. The issues described could be considered by policy makers who are investigating national smokefree laws or by-laws covering transportation settings.

  16. A new vehicle data bus architecture and IVIS evaluation platform for ITS modulus

    Energy Technology Data Exchange (ETDEWEB)

    Spelt, P.F. [Oak Ridge National Lab., TN (United States); Kirson, A.M. [Motorola, Inc., Northbrook, IL (United States); Scott, S. [Jet Propulsion Lab., Washington, DC (United States)

    1998-12-31

    An increasing number of ITS-related after-market systems present a set of in-vehicle installation and use problems relatively unique in the history of automobile use. Many automobile manufacturers would like to offer these new state of the art devices to customers, but are hampered by the current design cycle of new cars. While auto manufacturers are indeed using multiplex buses (the automotive equivalent of a computer local area network), problems remain because manufacturers are not converging on a single bus standard. This paper presents a new dual-bus architecture to address these problems, with an In-Vehicle Information System (IVIS) research platform on which the principles embodied in the ITS Data Bus architecture can be evaluated. The dual-bus architecture has been embodied in a proposed SAE standard, with a ratification vote in December, 1996. The architecture and a reference model for the interfaces and protocols of the new bus are presented and described. The goals of the ITS Data Bus are to be inexpensive and easy to install, and to provide for safe and secure functioning. These high-level goals are embodied in the proposed standard. The IVIS Development Platform comprises a number of personal computers linked via ethernet LAN, with a high-end PC serving as the IVIS computer. In this LAN, actual devices can be inserted in place of the original PC which emulated them. This platform will serve as the development and test bed for an ITS Data Bus Conformity Test, the SAE standard for which has also been developed.

  17. 面向公交客车应用的插电式混合动力实时优化策略研究%Research on City-bus Application-oriented Real-time Optimal Energy Management Strategy for Plug-in Hybrid Electric Bus

    Institute of Scientific and Technical Information of China (English)

    杨超; 焦晓红; 李亮; 游思雄; 颜丙杰; 马兹林

    2015-01-01

    插电式混合动力汽车随着电功率比的逐渐提升实现了机电耦合系统的能量深度混合.然而在应对复杂瞬变的城市公交工况时,如何通过设计实时高效的能量管理策略实现插电式混合动力客车全工况能量消耗最优已成为学术界的研究热点.考虑城市公交工况路况信息对能量分配的影响以及同轴并联式系统构型的自身特点,提出等效坡道在线估计及相应的电池荷电状态(State of charge, SOC)轨线修正方法,在此基础上利用等效油耗最小策略(Equivalent consumption minimization strategy, ECMS)设计一种实时优化能量管理策略,将整条公交线路的能量需求进行合理分配,另外对发动机起停的约束条件保证了发动机的合理高效运行.仿真结果表明所提出的实时优化能量管理策略与实际中应用的规则策略相比,对整车燃油经济性的提升更为显著,且可以更好地匹配公交工况与动力系统构型.实车试验结果也验证了所提出方法的有效性.因此所提出方法为基于优化理论的实车控制策略应用提供了理论依据.%With the gradual increase of the electric power ratio, the energy hybridization might be implemented in the electromechanical coupling system of plug-in hybrid electric vehicle. But for the complicated and transient driving conditions of city bus, how to minimize the energy consumption within the driving cycle through designing the real-time energy management strategy for plug-in hybrid electric bus(PHEB) might be the research focus in theacademia. Considering the characteristics of the driving condition of city bus and the single-shaft parallel hybrid powertrain, an equivalent grade estimation method and the relevant battery state of charge(SOC) correction approach are proposed, and then based on the above two approaches, the energy in one city bus route might be optimally distributed by the employed equivalent consumption minimization

  18. Chaos in drive systems

    Directory of Open Access Journals (Sweden)

    Kratochvíl C.

    2007-10-01

    Full Text Available The purpose of this article is to provide an elementary introduction to the subject of chaos in the electromechanical drive systems. In this article, we explore chaotic solutions of maps and continuous time systems. These solutions are also bounded like equilibrium, periodic and quasiperiodic solutions.

  19. Driving with a Goat

    Institute of Scientific and Technical Information of China (English)

    高素菊

    2006-01-01

    <正>A highway patrol officer was sitting in his car beside the road one day when he noticed a man driving with a goat in the back seat of his car.Turning on the lights,he pulled out,sped up, and pulled the man over.

  20. Magnetized drive fluids

    Energy Technology Data Exchange (ETDEWEB)

    Rosensweig, R.E.; Zahn, M.

    1986-04-01

    A process is described for recovering a first fluid from a porous subterranean formation which comprises injecting a displacement fluid in an effective amount to displace the first fluid, injecting a ferrofluid, applying a magnetic field containing a gradient of field intensity within the formation, driving the displacement fluid through the formation with the ferrofluid and recovering first fluid.

  1. Fresh Drive Against Corruption

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    China’s government is making efforts to prevent corruption by taking harsh measures against the illegal selection and appointment of cadres on the 10th anniversary of China’s anti-corruption drive,President Hu Jintao called fogreater efforts to carry it out.

  2. Efficient driving; Effizientes Fahren

    Energy Technology Data Exchange (ETDEWEB)

    Dillmann, Gerhard; Prys, Gerhard; Klinkert, Carsten; Sauer, Juergen; Otasevic, Aleksandar; Steinbock, Robert [BMW Group, Muenchen (Germany)

    2008-11-15

    With the BMW Efficient Dynamics development strategy, the new BMW 7 Series is proving that a superior, dynamic driving experience with simultaneous reduction of fuel consumption and emissions can be combined with the premium standards of the luxury automobile class. (orig.)

  3. Gaze-controlled Driving

    DEFF Research Database (Denmark)

    Tall, Martin; Alapetite, Alexandre; San Agustin, Javier;

    2009-01-01

    We investigate if the gaze (point of regard) can control a remote vehicle driving on a racing track. Five different input devices (on-screen buttons, mouse-pointing low-cost webcam eye tracker and two commercial eye tracking systems) provide heading and speed control on the scene view transmitted...

  4. Drugs and driving

    NARCIS (Netherlands)

    Walsh, J. Michael; De Gier, Johan J.; Christopherson, Asbjørg S.; Verstraete, Alain G.

    2004-01-01

    The authors present a global overview on the issue of drugs and driving covering four major areas: (1) Epidemiology and Prevalence-which reviews epidemiological research, summarizes available information, discusses the methodological shortcomings of extant studies, and makes recommendations for futu

  5. Conceptual Design of the TPF-O SC Bus

    Science.gov (United States)

    Purves, Lloyd R.

    2007-01-01

    One option under current study for the Terrestrial Planet Finder-Occulter (TPF-O) observatory shares some key features of the Hubble Space Telescope (HST). Both are space telescopes with a primary mirror aperture of around 2.4 meters and designed to observe in the visible to near infrared range of wavelengths, with the major difference in science capability being that TPF-O has an areal FOV on the order of 100 times larger than that of HST. This larger FOV, whose science camera is also expected to provide fine guidance, and other mission differences, mean that most TPF-O SC bus subsystems will have very different requirements than those of HST. Unlike HST in LEO, TPF-O is designed to operate in an orbit around the Sun-Earth lagrange 2 (SEL2) point. The longer communications range to SEL2 and the large FOV require much higher performance data processing and communications than HST. Maintaining a SEL2 orbit requires TPF-O, unlike HST, to have a propulsion system. TPF-O will have a specialized tracking system that allows the formation flying occulter to maintain its required position. However, despite these additional features, the velocity required for reaching SEL2 and the limited capabilities of affordable launch vehicles require TPF-O to have a compact and low-mass design relative to HST. Finally, TPF-O may utilize a modular design to reduce development cost and, if it required, allow servicing using approaches different from those of HST.

  6. Implementation of Ada protocols on Mil-STD-1553 B data bus

    Science.gov (United States)

    Ruhman, Smil; Rosemberg, Flavia

    1986-01-01

    Standardization activity of data communication in avionic systems started in 1968 for the purpose of total system integration and the elimination of heavy wire bundles carrying signals between various subassemblies. The growing complexity of avionic systems is straining the capabilities of MIL-STD-1553 B (first issued in 1973), but a much greater challenge to it is posed by Ada, the standard language adopted for real-time, computer embedded-systems. Hardware implementation of Ada communication protocols in a contention/token bus or token ring network is proposed. However, during the transition period when the current command/response multiplex data bus is still flourishing and the development environment for distributed multi-computer Ada systems is as yet lacking, a temporary accomodation of the standard language with the standard bus could be very useful and even highly desirable. By concentrating all status informtion and decisions at the bus controller, it was found to be possible to construct an elegant and efficient harware impelementation of the Ada protocols at the bus interface. This solution is discussed.

  7. Real-time and reliability analysis of time-triggered CAN-bus

    Institute of Scientific and Technical Information of China (English)

    Xia Jiqiang; Zhang Chuansen; Bai Ronggang; Xue Liqiang

    2013-01-01

    Real-time performance and reliability are two most important issues in applications of time-triggered controller area network (CAN) bus systems at present.A scheduling matrix of time-triggered CAN-bus system is established using average-loading algorithm.Periodic messages are guaranteed to transmit without delay by distributing independent transmission windows within the system matrix.Considering the traditional CAN-bus transmission mechanism and the time-triggered feature,an algorithm is improved to calculate the worst-case delay of event-triggered messages in time-triggered CAN-bus systems.The failure probability is calculated for event-triggered messages whose worst-case delay exceeds their deadlines.Different levels of redundant structures of CAN-bus circuits are analyzed and the maintenance management is proposed to improve the system reliability.Finally,the reliabilities of different structures are calculated and the influences of maintenance on the system reliability are analyzed.

  8. Design and Implementation of High Performance AHB Arbiter for on chip Bus Architecture

    Directory of Open Access Journals (Sweden)

    ASHUTOSH KUMAR SINGH,

    2011-03-01

    Full Text Available Resolution is a big issue in SOC( system On Chip while dealing with number of master trying to sense a single data bus . The ffectiveness of a system to resolve this priority resides in its ability to logical assignment of the chance to transmit data width of the data, response to the interrupts etc. The purpose of this paper is to propose the scheme to implement such a system using the specification of AMBA bus protocol .The scheme involves the typical AMBA features of ‘single clock edge transition ‘, Split transaction ‘,’several bus masters ‘, ‘burst transfer ’.The bus arbiter ensures that only one bus master at a time is allowed to initiate data ransfers. Even though the arbitration protocol is fixed, any arbitration algorithm, such as highest priority or fair access can be implemented depending on the application requirements .The design architecture is written using VHDL(Very High Speed Integrated CircuitsHardware Description Language code using Xilinx ISE Tools .The architecture is modeled and synthesized using RTL(Register Transfer Level abstraction and Implemented on Virtex2 series.

  9. Design and Analysis of Virtual Bus Transport Using Synchronous Digital Hierarchy/Synchronous Optical Networking

    Directory of Open Access Journals (Sweden)

    R. Hassan

    2008-01-01

    Full Text Available This study presented a new data link layer design for the virtual bus architecture. The virtual bus is a hierarchical access network offered a broadcast capability for data and signaling. The proposed of the study is to support Quality of Service (QoS in network. During study, the most promising technology capable of delivering full service access at high data rates is Synchronous Digital Hierarchy (SDH/Synchronous Optical Networking (SONET. For that reason, we develop SDH/SONET as a physical layer for the virtual bus network. The main goal of this investigation was to study the performance of transmission medium and the overall performance of the network. We exemplify a Multiple Access Protocol (MAP with Generic Frame Procedure (GFP for transmitting IP network protocol datagram over SDH/SONET. This is a novel method for transmitting MAP with GFP. The protocol adds multi-terminal access capability to an inherently point-to-point link. It enabled the design of seamless networking environments using SDH/SONET as the transmission medium for Metropolitan Area Network (MAN. The new frame mapping protocol is known as Virtual Bus Transport (VBT. The performance of multiple traffic generators in a virtual bus network is of major interest for mobile network provider. We used OMNeT simulation tool to evaluate the result. Through the simulation it proved that the VBT scheduling technique offers better treatment mainly to the higher Qos requirement traffic.

  10. Geometric-Process-Based Battery Management Optimizing Policy for the Electric Bus

    Directory of Open Access Journals (Sweden)

    Yan Li

    2015-01-01

    Full Text Available With the rapid development of the electric vehicle industry and promotive policies worldwide, the electric bus (E-bus has been adopted in many major cities around the world. One of the most important factors that restrain the widespread application of the E-bus is the high operating cost due to the deficient battery management. This paper proposes a geometric-process-based (GP-based battery management optimizing policy which aims to minimize the average cost of the operation on the premise of meeting the required sufficient battery availability. Considering the deterioration of the battery after repeated charging and discharging, this paper constructs the model of the operation of the E-bus battery as a geometric process, and the premaintenance time has been considered with the failure repairment time to enhance the GP-based battery operation model considering the battery cannot be as good as new after the two processes. The computer simulation is carried out by adopting the proposed optimizing policy, and the result verifies the effectiveness of the policy, denoting its significant performance on the application of the E-bus battery management.

  11. Introduction to corridor selection & assessment for Bus Rapid Transit System (BRTS in Hyderabad

    Directory of Open Access Journals (Sweden)

    Bhanu Kireeti Chanda

    2014-06-01

    Full Text Available Bus rapid transit system is an innovation and it is up gradation to the present transport system. BRT is affordable, adaptable and cost effective. The term of rapid transit system means a form of high speed urban passenger transportation. Here, the mode of transportation is bus hence it is called as bus rapid transit system (BRTS. Transportation facilities and the system will be different form different countries. Especially for the developing countries, transportation is a problem and BRT is the best way to overcome it. If a country gets richer the development will be seen in different aspects like education, industry, science and technology etc., except transport which will get worse. There are many ways to get rid of these traffic issues and transport problems. What attracted the countries to install BRT is the bus way concept as that it can cover whole city and is cheaper than the rail. BRT is a high speed rapid transit system using high capacity vehicles, physically separated bus ways, modern station with electronic fare collection, rapid boarding and high service frequency which result more passengers and less congestion. This paper presents an overview of BRTS and corridor selection & assessment for it in Hyderabad through surveys etc.

  12. Utility and Weight of Factors of Bus Transit’ s Service Quality Analysis in Nanjing

    Institute of Scientific and Technical Information of China (English)

    Jianrong Liu; Tangyi Guo

    2015-01-01

    Service quality is a major factor that affects how public transport users evaluate bus service. In order to evaluate how bus users make trade⁃offs across travel cost, time, reliability, etc., and to investigate the extent to which the components of service quality vary according to relevant trip characteristics, this paper analyzes service quality of bus transit with the conjoint analysis. Through data analysis, the levels ’ utility values of reliability, waiting time, walking time, etc.,on the commuter trip and the non⁃commuter trip are gotten, so it is the utility function of the transit system. Then the factors’ weights are obtained through the utility values. The results show that on the commuter trip, passengers value reliability the most, which is followed by waiting time and walking time, while in⁃bus environment, price and station environment’ s weights are small. While on the non⁃commuter trip, the weights in a higher order to lower order are the first for reliability, the second for in⁃bus environment, the third for walking time, the fourth for station environment and the last for ticket price.

  13. An interconnecting bus power optimization method combining interconnect wire spacing with wire ordering

    Institute of Scientific and Technical Information of China (English)

    Zhu Zhang-Ming; Hao Bao-Tian; En Yun-Fei; Yang Yin-Tang; Li Yue-Jin

    2011-01-01

    On-chip interconnect buses consume tens of percents of dynamic power in a nanometer scale integrated circuit and they will consume more power with the rapid scaling down of technology size and continuously rising clock frequency,therefore it is meaningful to lower the interconnecting bus power in design. In this paper, a simple yet accurate interconnect parasitic capacitance model is presented first and then, based on this model, a novel interconnecting bus optimization method is proposed. Wire spacing is a process for spacing wires for minimum dynamic power, while wire ordering is a process that searches for wire orders that maximally enhance it. The method, i.e., combining wire spacing with wire ordering, focuses on bus dynamic power optimization with a consideration of bus performance requirements.The optimization method is verified based on various nanometer technology parameters, showing that with 50% slack of routing space, 25.71% and 32.65% of power can be saved on average by the proposed optimization method for a globalbus and an intermediate bus, respectively, under a 65-nm technology node, compared with 21.78% and 27.68% of power saved on average by uniform spacing technology. The proposed method is especially suitable for computer-aided designof nanometer scale on-chip buses.

  14. Multi-Purpose Low Voltage Dual Output DC-DC Converter For 100V Power Bus Telecom Platform

    Science.gov (United States)

    Galiana, D.; Mollard, J. M.

    2011-10-01

    The decreasing supply voltages of digital electronic and high speed ADC (Analog to Digital Converter) and DAC (Digital to Analog Converter) require flexible and high current secondary power distribution system. In the frame of the Inmarsat I-XL program, a 12 kW geomobile SatCom satellite, with 100 V regulated power bus, a multi purpose dual output converter was developed for the payload processor as a building block. After a short introduction on the main performance requirements, the baseline architecture is presented. The main drivers of the architecture are reliability, adjustability, radiation tolerant and single event free, volume and mass. The combination of all these constraints highlights the need of significant breakthrough in various domains. Many research results related to packaging and power electronic topics are brought up. These results directly drive the adopted solution presented in the next step followed by a description of the integration of the defined building block in the Inmarsat I-XL payload IP (Integrated Processor). Finally, the main electrical performances such as output ripple and spikes, load step transient and stability are summarized.

  15. What Drives Commodity Prices?

    OpenAIRE

    Chen, Shu-Ling; Jackson, John D; Kim, Hyeongwoo; Resiandini, Pramesti

    2012-01-01

    This paper examines common forces driving the prices of 51 highly tradable commodities. We demonstrate that highly persistent movements of these prices are mostly due to the first common component, which is closely related to the US nominal exchange rate. In particular, our simple factor-based model outperforms the random walk model in out-of-sample forecast for the US exchange rate. The second common factor and de-factored idiosyncratic components are consistent with stationarity, implyin...

  16. Driving in America

    Institute of Scientific and Technical Information of China (English)

    刘世一

    2005-01-01

    Mitsuaki recently arrived in the United States to enter university. He wants to do well in his studies and adjust to the new culture. But Mitsuaki has a problem. It's not his roommates. It's not his school fees. It's not even his English ability. Mitsuaki's problem is that he doesn't have a car. And in America, that really makes him a foreigner. Mitsuaki has already discovered a basic fact of American culture : Driving is a way of life.

  17. Driving and Neurodegenerative Diseases

    OpenAIRE

    Uc, Ergun Y.; Rizzo, Matthew

    2008-01-01

    The proportion of elderly in the general population is rising, resulting in greater numbers of drivers with neurodegenerative disorders such as Alzheimer’s disease (AD) and Parkinson’s disease (PD). These neurodegenerative disorders impair cognition, visual perception, and motor function, leading to reduced driver fitness and greater crash risk. Yet medical diagnosis or age alone is not reliable enough to predict driver safety or crashes, or revoke the driving privileges of these drivers. Dri...

  18. Mitigating Distracted Driving

    OpenAIRE

    Cox, Tim; Kolberg, Kenny

    2014-01-01

    The scourge of distracted driving is not limited to any one demographic group or nation. It is global and affects every victim and victims’ families. This dire situation, caused largely by technology such as texting, requires technological solutions, including new traffic safety countermeasures. The transverse rumble strip, a countermeasure reinvented in 2009 as the temporary portable rumble strip, is already proving a significant, innovative addition to work zone safety processes and procedu...

  19. Control rod drive

    International Nuclear Information System (INIS)

    Object: To provide a simple and compact construction of an apparatus for driving a drive shaft inside with a magnetic force from the outside of the primary system water side. Structure: The weight of a plunger provided with an attraction plate is supported by a plunger lift spring means so as to provide a buffer action at the time of momentary movement while also permitting the load on lift coil to be constituted solely by the load on the drive shaft. In addition, by arranging the attraction plate and lift coil so that they face each other with a small gap there-between, it is made possible to reduce the size and permit efficient utilization of the attracting force. Because of the small size, cooling can be simply carried out. Further, since there is no mechanical penetration portion, there is no possibility of leakage of the primary system water. Furthermore, concentration of load on a latch pin is prevented by arranging so that with a structure the load of the control rod to be directly beared through the scrum latch. (Kamimura, M.)

  20. Control rod drive system

    International Nuclear Information System (INIS)

    The present invention concerns an electromotive driving-type control rod driving system of a BWR type reactor, for which sliding resistance (friction) test can be performed of a movable portion of the control rod driving mechanisms. Namely, a hydraulic pressure control unit has following constitutions in addition to a conventional constitution as a sliding resistance test performing function. (1) A restricting valve is disposed downstream of the scram valve of scram pipelines to control flow rate and pressure of pressurized water flown in the pipelines. (2) A pressure gauge detects a pressure between the scram valve and the restricting valve. (3) A flow meter detects the flow rate of pipelines controlled by the restricting valve. (4) A recording pressure detector detects the pressure at the downstream of the restricting valve. (5) The recording device is attached when the sliding resistant test is performed for tracing the pressure measured by the pressure detection device. Further, the scram valve sends electric signals to a central operation chamber when it is fully closed. The central operation chamber has a function of fully opening the restricting valve by way of the electric signals. (I.S.)

  1. Increasing throughput of multiplexed electrical bus in pipe-lined architecture

    Science.gov (United States)

    Asaad, Sameh; Brezzo, Bernard V; Kapur, Mohit

    2014-05-27

    Techniques are disclosed for increasing the throughput of a multiplexed electrical bus by exploiting available pipeline stages of a computer or other system. For example, a method for increasing a throughput of an electrical bus that connects at least two devices in a system comprises introducing at least one signal hold stage in a signal-receiving one of the two devices, such that a maximum frequency at which the two devices are operated is not limited by a number of cycles of an operating frequency of the electrical bus needed for a signal to propagate from a signal-transmitting one of the two devices to the signal-receiving one of the two devices. Preferably, the signal hold stage introduced in the signal-receiving one of the two devices is a pipeline stage re-allocated from the signal-transmitting one of the two devices.

  2. Analysis of bus width and delay on a fully digital signum nonlinearity chaotic oscillator

    KAUST Repository

    Mansingka, Abhinav S.

    2012-07-29

    This paper introduces the first fully digital implementation of a 3rd order ODE-based chaotic oscillator with signum nonlinearity. A threshold bus width of 12-bits for reliable chaotic behavior is observed, below which the system output becomes periodic. Beyond this threshold, the maximum Lyapunov exponent (MLE) is shown to improve up to a peak value at 16-bits and subsequently decrease with increasing bus width. The MLE is also shown to gradually increase with number of introduced internal delay cycles until a peak value at 14 cycles, after which the system loses chaotic properties. Introduced external delay cycles are shown to rotate the attractors in 3-D phase space. Bus width and delay elements can be independently modulated to optimize the system to suit specifications. The experimental results of the system show low area and high performance on a Xilinx Virtex 4 FPGA with throughput of 13.35 Gbits/s for a 32-bit implementation.

  3. Calculation of Flexible Bus-Bars Electrodynamic Stability with Application of Implicit Scheme

    Directory of Open Access Journals (Sweden)

    Y. G. Panamarenka

    2008-01-01

    Full Text Available A numerical method for calculation of open-air substations’ flexible bus-bars dynamic at short-circuit has been improved on equations of a flexible elastic string with application of an implicit scheme. On the basis of the numerical method a computer program FLEBUS for calculation of substations’ flexible bus-bars dynamic at short-circuit has been developed. An approbation and an estimation of calculation result reliability have been carried out in accordance with the program while using experimental data. On the basis of the obtained information it is possible to assert that the developed program is an independent tool for calculation of electrodynamic stability of substations’ flexible bus-bars.

  4. Fiber optic data bus space experiment on board the microlectronics and photonics test bed (MPTB)

    Science.gov (United States)

    Dale, Cheryl J.; Marshall, Paul W.; de la Chapelle, Michael; Fritz, Martin E.; LaBel, Kenneth A.

    1995-05-01

    The Microelectronics and Photonics Test Bed (MPTB) is a space experiment which will evaluate the performance of components and sybsystems of important new technologies is advance of their deployment of future spacecraft. Devices aboard MPTB will monitor the environment, and the radiation effects data obtained on components will be compared to ground tests and predictions. We present a description of the proposed high performance fiber optic data bus (FODB) experiment for MPTB which will feature the newly available 200 Mbps Boeing STAR-FODB hardware which is designed for space applications. This bus uses a passive star architecture and implements a Linear Token Passing Bus (LTPB) standard. The existence of extensive ground radiation test results for the STAR-FODB will enable high confidence predicition of its on-orbit performance to be made prior to launch.

  5. Bus Access Optimization for Distributed Embedded Systems Based on Schedulability Analysis

    DEFF Research Database (Denmark)

    Pop, Paul; Eles, Petru; Peng, Zebo

    2000-01-01

    We present an approach to bus access optimization and schedulability analysis for the synthesis of hard real-time distribution embedded systems. The communication model is based on a time-triggered protocol. We have developed an analysis for the communication delays proposing four different messa...... scheduling policies over a time-triggered communication channel. Optimization strategies for the bus access scheme are developed, and the four approaches to message scheduling are compared using extensive experiments.......We present an approach to bus access optimization and schedulability analysis for the synthesis of hard real-time distribution embedded systems. The communication model is based on a time-triggered protocol. We have developed an analysis for the communication delays proposing four different message...

  6. Implemented Wavelet Packet Tree based Denoising Algorithm in Bus Signals of a Wearable Sensorarray

    Science.gov (United States)

    Schimmack, M.; Nguyen, S.; Mercorelli, P.

    2015-11-01

    This paper introduces a thermosensing embedded system with a sensor bus that uses wavelets for the purposes of noise location and denoising. From the principle of the filter bank the measured signal is separated in two bands, low and high frequency. The proposed algorithm identifies the defined noise in these two bands. With the Wavelet Packet Transform as a method of Discrete Wavelet Transform, it is able to decompose and reconstruct bus input signals of a sensor network. Using a seminorm, the noise of a sequence can be detected and located, so that the wavelet basis can be rearranged. This particularly allows for elimination of any incoherent parts that make up unavoidable measuring noise of bus signals. The proposed method was built based on wavelet algorithms from the WaveLab 850 library of the Stanford University (USA). This work gives an insight to the workings of Wavelet Transformation.

  7. Evacuated FM08 Fuses Carry a Sustained Arc in a Bus over 75 VDC

    Science.gov (United States)

    Leidecker, Henning; Slonaker, J.

    1999-01-01

    The FM08 style fuse is specified to interrupt an overcurrent of up to 300 A in a bus of up to 125 VDC, but this applies only when its barrel is filled with air. When placed into a space-grade vacuum, the FM08 style fuse exhausts its air within a year. Then, the probability of an enduring arc is high for all ratings when the bus is above 75 VDC, and the overcurrent is large. The arc endures until something else interrupts the current. The fuse can violently eject metal vapor or other material during the sustained arcing. The evacuated FM08 does not develop a sustained arc when interrupted in a bus of 38 VDC or less, at least when there is little inductance in the circuit. This is consistent with its successful use in many spacecraft having buses in the range 24 to 36 volts.

  8. 微型计算机PCI总线浅析%On Microcomputer PCI Bus

    Institute of Scientific and Technical Information of China (English)

    张宝菊; 孙景瑞; 刘艳

    2001-01-01

    较系统地分析了PCI总线的定义、分类及特点,论述了PCI总线的读写时序及总线仲裁问题,并将PCI总线应用在图象处理等方面,解决了数据通量的瓶颈问题.%This article analyses the definition,classification andpeculiarity of PCI bus systematically. And it expounds the problem of reading and writing proc ession and arbiitration of PCI bus. Further more, the PCI bus has been used in the im age treatment and any other fields,solving the difficult problem of data flux.

  9. IEEE 1394/firewire a low cost, high speed, digital serial bus

    Energy Technology Data Exchange (ETDEWEB)

    Gaunt, R.

    1997-05-01

    Does the world need yet another 1/0 bus standard? If you need fast and cheap serial video communication, then the answer is yes. As technology advances, so too must data transport mechanisms advance. You can`t expect RS-232 to support real-time digital video, and if you can`t afford expensive professional serial video interfaces, (such as Sony`s Serial Digital Interface), Firewire may be a good solution. IEEE 1394, or commonly known as Firewire, is a general purpose serial bus that meets many of the 1/0 needs of today`s video and multimedia developers. For those of you who only read the first paragraph, here`s Firewire in a nutshell: It provides a guaranteed transfer rate of 10OMbps or 20OMbps of digital data (such as video direct from camera to computer), over an inexpensive, non-proprietary serial bus. Here is a list of its features.

  10. Research on Integration of Coal Mine Monitoring and Control System with Field Bus Control System

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    According to the construction of current coal mine monitoring and control systems in China, the paper proposes three kinds of applicable schemes of integrating PLC and DCS systems with field bus technology to digitize the system and to improve the flexibility and extent of the system. Essentially, the paper introduces the integration of FCS on I/O layers. Based on a real coal mine safety-monitoring and control system applied with a CAN field bus, the major technology of system relays and extensions is discussed. We believe that one of the most applicable methods is currently replacing the connection between function-stations and field-sensors with a CAN bus on I/O layers for system integration.

  11. Design of belt conveyor electric control device based on CC-link bus

    Science.gov (United States)

    Chen, Goufen; Zhan, Minhua; Li, Jiehua

    2016-01-01

    In view of problem of the existing coal mine belt conveyor is no field bus communication function, two levels belt conveyor electric control system design is proposed based on field bus. Two-stage belt conveyor electric control system consists of operation platform, PLC control unit, various sensors, alarm device and the water spraying device. The error protection is realized by PLC programming, made use of CC-Link bus technology, the data share and the cooperative control came true between host station and slave station. The real-time monitor was achieved by the touch screen program. Practical application shows that the system can ensure the coalmine production, and improve the automatic level of the coalmine transport equipment.

  12. A Feeder-Bus Dispatch Planning Model for Emergency Evacuation in Urban Rail Transit Corridors

    Science.gov (United States)

    Wang, Yun; Yan, Xuedong; Zhou, Yu; Zhang, Wenyi

    2016-01-01

    The mobility of modern metropolises strongly relies on urban rail transit (URT) systems, and such a heavy dependence causes that even minor service interruptions would make the URT systems unsustainable. This study aims at optimally dispatching the ground feeder-bus to coordinate with the urban rails’ operation for eliminating the effect of unexpected service interruptions in URT corridors. A feeder-bus dispatch planning model was proposed for the collaborative optimization of URT and feeder-bus cooperation under emergency situations and minimizing the total evacuation cost of the feeder-buses. To solve the model, a concept of dummy feeder-bus system is proposed to transform the non-linear model into traditional linear programming (ILP) model, i.e., traditional transportation problem. The case study of Line #2 of Nanjing URT in China was adopted to illustrate the model application and sensitivity analyses of the key variables. The modeling results show that as the evacuation time window increases, the total evacuation cost as well as the number of dispatched feeder-buses decrease, and the dispatched feeder-buses need operate for more times along the feeder-bus line. The number of dispatched feeder-buses does not show an obvious change with the increase of parking spot capacity and time window, indicating that simply increasing the parking spot capacity would cause huge waste for the emergent bus utilization. When the unbalanced evacuation demand exists between stations, the more feeder-buses are needed. The method of this study will contribute to improving transportation emergency management and resource allocation for URT systems. PMID:27676179

  13. 76 FR 28947 - Bus Testing: Calculation of Average Passenger Weight and Test Vehicle Weight, and Public Meeting...

    Science.gov (United States)

    2011-05-19

    ..., 2011 (76 FR 13580). Furthermore, due to the complexity of the issues proposed in the NPRM, FTA is..., FTA published an NPRM in the Federal Register (76 FR 13850) proposing to amend its bus testing... Federal Transit Administration 49 CFR Part 665 RIN 2132-AB01 Bus Testing: Calculation of Average...

  14. Bus crash severity in the United-States: The role of driver behavior, service type, road factors and environmental conditions

    DEFF Research Database (Denmark)

    Kaplan, Sigal; Prato, Carlo Giacomo

    Recent years have witnessed a growing interest in improving bus safety operations worldwide. While in the United States buses are considered relatively safe, the number of bus accidents is far from being negligible, triggering the introduction of the Motor-coach Enhanced Safety Act of 2011.The cu...

  15. ABB i-bus EIB智能酒店灯光控制系统设计方案

    Institute of Scientific and Technical Information of China (English)

    华卫智能设备

    2007-01-01

    @@ i-bus系统介绍 欧洲安装总线(EIB,European Instlallation Bus)在亚洲称为电气安装总线(Electrical Installation Bus),是电气布线领域使用范围最广的行业规范和产品标准.

  16. Evaluating a GPS-Based Transportation Device to Support Independent Bus Travel by People with Intellectual Disability

    Science.gov (United States)

    Davies, Daniel K.; Stock, Steven E.; Holloway, Shane; Wehmeyer, Michael L.

    2010-01-01

    We examined the utility of a PDA-based software system with integrated GPS technology for providing location-aware visual and auditory prompts to enable people with intellectual disability to successfully navigate a downtown bus route. Participants using the system were significantly more successful at completing a bus route than were people in a…

  17. Experiences with formal engineering: model-based specification, implementation and testing of a software bus at Neopost

    NARCIS (Netherlands)

    Sijtema, M.; Belinfante, A.; Stoelinga, M.I.A.; Marinelli, L.; Salaün, G.; Schätz, B.

    2014-01-01

    We report on the actual industrial use of formal methods during the development of a software bus. During an internship at Neopost Inc., of 14 weeks, we developed the server component of a software bus, called the XBus, using formal methods during the design, validation and testing phase: we modeled

  18. Constructing a Distracted Driving Dataset

    OpenAIRE

    Foley, James; Ebe, Kazu; Owens, Justin M.; Angell, Linda; Hankey, Jonathan M.

    2014-01-01

    Distracted driving has become a topic of critical importance to driving safety research over the past several decades. Naturalistic driving data offer a unique opportunity to study how drivers engage with secondary tasks in real-world driving; however, the complexities involved with identifying and coding relevant epochs of naturalistic data have limited its accessibility to the general research community. Method This project was developed to help address this problem by creating an accessibl...

  19. Risk factors associated with bus accident severity in the United States: A generalized ordered logit model

    DEFF Research Database (Denmark)

    Kaplan, Sigal; Prato, Carlo Giacomo

    2012-01-01

    that accident severity increases: (i) for young bus drivers under the age of 25; (ii) for drivers beyond the age of 55, and most prominently for drivers over 65 years old; (iii) for female drivers; (iv) for very high (over 65 mph) and very low (under 20 mph) speed limits; (v) at intersections; (vi) because...... of 2011. Method: The current study investigates the underlying risk factors of bus accident severity in the United States by estimating a generalized ordered logit model. Data for the analysis are retrieved from the General Estimates System (GES) database for the years 2005–2009. Results: Results show...

  20. Research and design on a kind of CASE environment architectural style based on ToolBus

    Institute of Scientific and Technical Information of China (English)

    Guo Bing; Shen Yan; Xie Jun; Wang Yong; Xiong Guangze

    2005-01-01

    Because CASE (computer aided software engineering) environment is a kind of complex system software, its software architecture is very important. From the viewpoint of software architecture, this paper first presents TBus architectural style, which is a kind of CASE environment architectural style based on ToolBus, then describes the architectural model and system's behavior in formal method, researches and analyzes the corresponding tool structural model. Last the paper implements a TBus architectural instance-LambdaBridge, which proves the validity of ToolBus and TBus architectural styles.

  1. Converter Power Density Increase using Low Inductive Integrated DC-link Capacitor/Bus

    DEFF Research Database (Denmark)

    Trintis, Ionut; Franke, Toke; Rannested, Bjørn;

    2015-01-01

    The power losses in switching devices have a direct effect on the maximum converter power. For a voltage source converter, the DC-link bus has a major influence on the power loss and safe operating area of the power devices. The Power Ring Film CapacitorTM integrated with an optimized bus structu...... has a measured inductance of around 5 nH. That allows the converter to switch with low turn-off losses, and allows the safe operation at higher dc-link voltages. This paper investigates the power transfer limits of a ShowerPower® cooled power stack....

  2. Simplified extension of the LSI-11 Q-Bus for a high energy laser control application

    International Nuclear Information System (INIS)

    Antares, a large, experimental laser fusion facility under construction at Los Alamos National Laboratory in New Mexico, is controlled by a network of PDP-11 minicomputers and microprocessors. The remote nodes of the Antares control network are based on an LSI-11/2 microcomputer interfaced to an STD Bus. This machine interface or MI forms the intelligent process controller located directly adjacent to the many diverse laser subsystem devices. The STD Bus, linked to the LSI-11/2 microcomputer, offers a standardized, cost effective means for the development of the specialized interface functions required for the high energy laser environment

  3. Mobile Encounters: Bus 5A as a cross-cultural meeting place

    DEFF Research Database (Denmark)

    Koefoed, Lasse Martin; Simonsen, Kirsten; Christensen, Mathilde Dissing

    2016-01-01

    The paper explores modes of encounters in the everyday practice of bus travel. Particularly, it addresses cross-cultural encounters located in the tension between familiarity and difference, between inclusion and exclusion. The paper is located in contemporary thoughts, approaching public transport...... not only as a moving device but also as a social arena. Furthermore, the bus is simultaneously perceived as a public space, at once composite, contradictory and heterogeneous, and as a meeting place involving ‘Throwntogetherness’. The encounters analysed are bodily, emotional charged and outspoken meetings...

  4. Realization and optimization of bus bar current transducers based on Hall effect sensors

    Science.gov (United States)

    Blagojević, Marjan; Jovanović, Uglješa; Jovanović, Igor; Mančić, Dragan; Popović, Radivoje S.

    2016-06-01

    In this paper the realization and optimization of two coreless open-loop bus bar current transducers based on a Hall effect sensor are presented. Two types of bus bar are evaluated: flat rectangular and rectangular with a restrictive region in the middle. Both realized transducers are capable of measuring AC and DC currents up to 300 A and 10 kHz frequency with nonlinearity less than 0.3% in the entire range. Several methods for resolving issues with the skin effect and stray magnetic fields are presented along with the experimental test results. Some of the presented methods are novel and have never been evaluated.

  5. Application of DD6180S city bus field bus technology%DD6180S城市客车总线技术应用

    Institute of Scientific and Technical Information of China (English)

    董秀芳; 王日新

    2011-01-01

    Emphatically introduced the CAN network composition of Huanghai DD6180S articulated city bus, combine with vehicle electric sub-control system,introduce the design of CAN circuit,expound the function definition of CAN control module interface in bus electric control system and connection to vehicle device.%着重介绍了黄海DD6180S铰接城市客车CAN总线网络构成,结合整车电器分控系统,介绍了CAN总线电路设计,阐述了CAN总线在客车电器控制系统中控制模块接口功能定义及与车辆设备连接。

  6. Application of ABB i-bus(R)EIB/KNX in Commercial Plaza%ABB i-bus(R)EIB/KNX在商业广场中的应用

    Institute of Scientific and Technical Information of China (English)

    张全林; 杜乐

    2008-01-01

    简要介绍了ABB i-bus(R)EIB/KNX智能建筑控制系统的基本原理及特点,并通过ABB i-bus(R)系统在西安骡马市商业步行街的应用,阐述了该系统在智能照明控制方面的功能、设备特点及优势.并通过该智能照明控制系统在安装前后电费开支的理论计算值分析,比较了采用该系统的节能效果.

  7. Analysis of Bus Tracking System Using GPS on Smartphones

    OpenAIRE

    Mane, Mr. Pradip Suresh; Vaishali D. Khairnar

    2014-01-01

    Public transport networks(PTNs)are difficult to use when the user is unfamiliar with the area they are traveling to.This is true for both infrequent users(including visitors)and regular users who need to travel to areas with which they are not acquainted.In these situations,adequate on-trip navigation information can substantially ease the use of public transportation and be the driving factor in motivating travelers to prefer it over other modes of transportation.However,estimating the local...

  8. Design and development of propulsion system for CNG-electric hybrid city-bus%天然气混合动力城市客车动力系统的设计与开发

    Institute of Scientific and Technical Information of China (English)

    舒红宇; 王锟; 陈齐平; 田野; 代幼文

    2012-01-01

    The design of propulsion system for CNG-electric hybrid city-bus is introduced based on the selection of driving cycle and the establishment of control strategy. Making program of powertrain' s configuration is included as well as parameters' selection and matching of components such as engine, motor, battery and transmission. The simulation results show that the design meets the requirements. The components of the propulsion system are integrated together, and then they are installed into the sample city-bus. The roadway test has been done under the target driving cycle. Compared with the peer CNG city-bus, there are 28% increasing in the largest climb degree and the acceleration time of 0-50 km is reduced more than 1.8 s, and the fuel saving rate achieves to 22 % under the typical city-bus driving cycle of China.%在选取循环工况和制定整车基本控制策略的基础上,对天然气混合动力城市客车的动力系统进行了设计与开发,包括其系统结构布置方案的确定,发动机、电机、电池和传动系统等的参数设计和匹配。动力系统的仿真结果表明设计达到了要求。样车试制完成以后,进行目标循环工况下的实际道路试验,结果表明:与同级天然气城市客车相比,最大爬坡度增加了28%,0~50km加速时间减少1.8S以上,中国典型城市公交循环工况下的节气率达到22%。

  9. Assessment on the occupational exposure of urban public bus drivers to bioaccessible trace metals through resuspended fraction of settled bus dust

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Peng [State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, No. 73 Huanghe Road, Nangang District, Harbin 150090 (China); Stockbridge School of Agriculture, University of Massachusetts, Amherst, MA 01003 (United States); Liu, Sa [Environmental Health Sciences Division, School of Public Health, University of California, Berkeley, CA, 94720-7360 (United States); Ye, Wenyuan [Department of Chemical Engineering, KU Leuven, Willem de Croylaan 46, B-3001 Heverlee (Belgium); Lin, Nan; Meng, Ping [State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, No. 73 Huanghe Road, Nangang District, Harbin 150090 (China); Feng, Yujie, E-mail: yujief@hit.edu.cn [State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, No. 73 Huanghe Road, Nangang District, Harbin 150090 (China); Zhang, Zhaohan; Cui, Fuyi; Lu, Binyu [State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, No. 73 Huanghe Road, Nangang District, Harbin 150090 (China); Xing, Baoshan [Stockbridge School of Agriculture, University of Massachusetts, Amherst, MA 01003 (United States)

    2015-03-01

    Limited information is available on the bioaccessible fraction of trace metals in the resuspended fraction of settled bus dust in order to estimate bus drivers ' occupational exposure. In this study, 45 resuspended fraction of settled dust samples were collected from gasoline and compressed natural gas (CNG) powered buses and analyzed for trace metals and their fraction concentrations using a three-step sequential extraction procedure. Experimental results showed that zinc (Zn) had the greatest bioaccessible fraction, recorded as an average of 608.53 mg/kg, followed in order of decreasing concentration by 129.80 mg/kg lead (Pb), 56.77 mg/kg copper (Cu), 34.03 mg/kg chromium (Cr), 22.05 mg/kg nickel (Ni), 13.17 mg/kg arsenic (As) and 2.77 mg/kg cadmium (Cd). Among the three settled bus dust exposure pathways, ingestion was the main route. Total exposure hazard index (HIt) for non-carcinogenic effect trace metals was lower than the safety level of 1. The incremental lifetime cancer risk (ILCR) for drivers was estimated for trace metal exposure. Pb and Ni presented relatively high potential risks in the non-carcinogenic and potentially carcinogenic health assessment for all drivers. ILCR was in the range of 1.84E − 05 to 7.37E − 05 and 1.74E − 05 to 6.95E − 05 for gasoline and CNG buses, respectively. - Highlights: • As, Cd and Ni had relatively higher bioaccessibility and mobility in the resuspended fraction of settled bus dust. • Bioaccessible metal concentrations were higher in gasoline-fueled buses than those in CNG-fueled buses. • The carcinogenic risk probabilities to drivers were around the acceptable level.

  10. Assessment on the occupational exposure of urban public bus drivers to bioaccessible trace metals through resuspended fraction of settled bus dust

    International Nuclear Information System (INIS)

    Limited information is available on the bioaccessible fraction of trace metals in the resuspended fraction of settled bus dust in order to estimate bus drivers ' occupational exposure. In this study, 45 resuspended fraction of settled dust samples were collected from gasoline and compressed natural gas (CNG) powered buses and analyzed for trace metals and their fraction concentrations using a three-step sequential extraction procedure. Experimental results showed that zinc (Zn) had the greatest bioaccessible fraction, recorded as an average of 608.53 mg/kg, followed in order of decreasing concentration by 129.80 mg/kg lead (Pb), 56.77 mg/kg copper (Cu), 34.03 mg/kg chromium (Cr), 22.05 mg/kg nickel (Ni), 13.17 mg/kg arsenic (As) and 2.77 mg/kg cadmium (Cd). Among the three settled bus dust exposure pathways, ingestion was the main route. Total exposure hazard index (HIt) for non-carcinogenic effect trace metals was lower than the safety level of 1. The incremental lifetime cancer risk (ILCR) for drivers was estimated for trace metal exposure. Pb and Ni presented relatively high potential risks in the non-carcinogenic and potentially carcinogenic health assessment for all drivers. ILCR was in the range of 1.84E − 05 to 7.37E − 05 and 1.74E − 05 to 6.95E − 05 for gasoline and CNG buses, respectively. - Highlights: • As, Cd and Ni had relatively higher bioaccessibility and mobility in the resuspended fraction of settled bus dust. • Bioaccessible metal concentrations were higher in gasoline-fueled buses than those in CNG-fueled buses. • The carcinogenic risk probabilities to drivers were around the acceptable level

  11. PURE DRIVE GT

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    在2004年奥林匹克赛事中,中国的李婷,孙甜甜取得了中国网球第一个金牌一女子双打冠军。忘记不了当时李婷挥动着她的BABOLAT(百保力)网拍Pure Drive Zylon 360°激动地拥抱着孙甜甜吵闹着,幸福地哭着的情景。

  12. Electrical machines & drives

    CERN Document Server

    Hammond, P

    1985-01-01

    Containing approximately 200 problems (100 worked), the text covers a wide range of topics concerning electrical machines, placing particular emphasis upon electrical-machine drive applications. The theory is concisely reviewed and focuses on features common to all machine types. The problems are arranged in order of increasing levels of complexity and discussions of the solutions are included where appropriate to illustrate the engineering implications. This second edition includes an important new chapter on mathematical and computer simulation of machine systems and revised discussions o

  13. Electric drive design methodology

    CERN Document Server

    Jufer, Marcel

    2013-01-01

    An electric drive that is designed or adapted to a specific application must take into account all the elements of the chain of constituent elements in its use and deployment. In addition to the motor, the transmission, power electronics, control, sensors, and electrical protection systems must be taken into account. The motor and the transmission can be optimized and designed to obtain the best energy efficiency assessment, in particular for dynamic nodes. An inventory and a characterization of these various components is proposed as part of this book's examination and explanation

  14. Electrical machines and drives

    CERN Document Server

    Hindmarsh, John

    2002-01-01

    Recent years have brought substantial developments in electrical drive technology, with the appearance of highly rated, very-high-speed power-electronic switches, combined with microcomputer control systems.This popular textbook has been thoroughly revised and updated in the light of these changes. It retains its successful formula of teaching through worked examples, which are put in context with concise explanations of theory, revision of equations and discussion of the engineering implications. Numerous problems are also provided, with answers supplied.The third edition in

  15. SmartDriver for school bus : participant's handbook

    International Nuclear Information System (INIS)

    SmartDriver is a key component of Natural Resources Canada's ecoENERGY for fleets program. The aim of the ecoENERGY initiative is to introduce fleets to energy-efficient practices for reducing fuel consumption and emissions and to help drivers adopt the driving practices outlined in the SmartDriver training materials. The handbook was designed as part of a comprehensive media package that included a CD-ROM with audio-visual components. The package was developed as a training strategy for fuel-efficient driving skills. The first module contained information on air pollution and techniques that drivers can adopt to reduce particulate matter, smog, greenhouse gas (GHG) emissions. An outline of new engine technologies developed to reduce emissions was also provided. The second module discussed various vehicle factors that influence fuel efficiency. Alternative fuels were reviewed, and vehicle components were discussed in relation to improving fuel economy. The module also included preventive maintenance tips as well as engine starting techniques and methods for reducing time spent idling. Various activities and games related to improving fuel efficiency were also included. 17 figs

  16. Ecological footprint analysis on the behavior of bus consumption%公交出行消费行为生态足迹分析

    Institute of Scientific and Technical Information of China (English)

    陈虹; 洪伟; 吴承祯; 陈灿

    2011-01-01

    -person/time share was up to 4.69 m2. As to electric bikes, although there was no exhaust emission in the driving process,they also consume lots of electricity in the charging process because of the huge numbers. Therefore, synthetically speaking, bus remains most popular public transportation means among all the alternatives.Thus, all the influential factors considered, the communal bus transportation should be developed with priority. From what is said in our quantitative and qualitative analysis, bus should be the best favorable traffic mode, if we really take the ideal of building-up a harmonious society with low-carbon consumption as the primary outlook upon our future.%计算了福州市公交的生态足迹,并进行了定量对比分析.结果表明,福州市1989-2009年公交总生态足迹呈直线上升的趋势,从1989年的233.22 hm2增加至2009年的19 160.07 hm2,增加了81倍,其中,化石能源生态足迹所占比重相当大,从1989年的68%增加至2009年的89%.伴随着城市化的进程,公交出行率不断增加,每人次公交出行的生态足迹呈现抛物线的关系.1989-2004年呈上升趋势,2004-2009年呈下降趋势,2009年每人次生态足迹为0.24 m2.同时,对比福州市的几种主要出行工具,综合出行时间和环境压力,公交是最值得推荐的一种出行方式.

  17. Advances in traction drive technology

    Science.gov (United States)

    Loewenthal, S. H.; Anderson, N. E.; Rohn, D. A.

    1983-01-01

    Traction drives are traced from early uses as main transmissions in automobiles at the turn of the century to modern, high-powered traction drives capable of transmitting hundreds of horsepower. Recent advances in technology are described which enable today's traction drive to be a serious candidate for off-highway vehicles and helicopter applications. Improvements in materials, traction fluids, design techniques, power loss and life prediction methods will be highlighted. Performance characteristics of the Nasvytis fixed-ratio drive are given. Promising future drive applications, such as helicopter main transmissions and servo-control positioning mechanisms are also addressed.

  18. Cycloconverter drive systems. Cycloconverter gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Chiashi, M.; Osawa, H.; Endo, K. (Fuji Electric Co. Ltd., Tokyo (Japan))

    1991-10-10

    Fuji Electric has completed preparation for the production of various cycloconverter variable-speed AC drive systems used for low-speed large-capacity drives, and is ready to supply the optimum system to meet purposes. Among cycloconverter drive systems of Fuji Electric, circulating current-free cycloconverter fed synchronous motor drive is superior in respect of input power factor and equipment capacity, induction motor drive is superior in respect of maintenance, and circulating current cycloconverter fed motor drive is superior in respect of controllability. This report describes outlines, system components, comparison of performances, control systems and their characteristics, and technology for advanced performance of these various cycloconverter drive systems. Furthermore, was introduced a development of hybrid cycloconverter using a GTO thyristor which can regulate input power factor at 1. 2 refs., 14 figs., 1 tab.

  19. Polar drive on OMEGA

    International Nuclear Information System (INIS)

    High-convergence polar-drive experiments are being conducted on OMEGA [T. R. Boehly et al., Opt. Commun. 133, 495 (1997)] using triple-picket laser pulses. The goal of OMEGA experiments is to validate modeling of oblique laser deposition, heat conduction in the presence of nonradial thermal gradients in the corona, and implosion energetics in the presence of laser-plasma interactions such as crossed-beam energy transfer. Simulated shock velocities near the equator, where the beams are obliquely incident, are within 5% of experimentally inferred values in warm plastic shells, well within the required accuracy for ignition. High, near-one-dimensional areal density is obtained in warm-plastic-shell implosions. Simulated back-lit images of the compressing core are in good agreement with measured images. Outstanding questions that will be addressed in the future relate to the role of cross-beam transfer in polar drive irradiation and increasing the energy coupled into the target by decreasing beam obliquity. (authors)

  20. Fast wave current drive

    International Nuclear Information System (INIS)

    Experiments on the fast wave in the range of high ion cyclotron harmonics in the ACT-1 device show that current drive is possible with the fast wave just as it is for the lower hybrid wave, except that it is suitable for higher plasma densities. A 1400 loop antenna launched the high ion cyclotron harmonic fast wave [ω/Ω = O(10)] into a He+ plasma with n/sub e/approx. =4 x 1012 cm-3 and B = 4.5 kG. Probe and magnetic loop diagnostics and FIR laser scattering confirmed the presence of the fast wave, and the Rogowski loop indicated that the circulating plasma current increased by up to 40A with 1 kW of coupled power, which is comparable to lower hybrid current drive in the same device with the same unidirectional fast electron beam used as the target for the RF. A phased antenna array would be used for FWCD in a tokamak without the E-beam

  1. Control rod drives

    International Nuclear Information System (INIS)

    Purpose: To rapidly detect the position to which a control rod has been rapidly inserted into the reactor core upon scram in the control rod drives for use in LMFBR type reactors. Constitution: In control rod drives comprising an acceleration spring disposed to the outside of an extension pipe and an acceleration pipe for conducting the spring force to a control rod for rapidly dropping the rod into the reactor core, a magnet having a repulsive force is disposed to each acceleration pipe and guide pipe as decelerating and buffering means for the acceleration pipe. The position of the control rod is detected by the interaction between the magnet and the coils attached to the inside of the guide pipe or reactor lead switch. According to this invention, 85 % scram signal which has hitherto been difficult to be processed electrically can be obtained with a sufficient intensity and with no delay to thereby improve the entire safety of the reactor system. Then, the inserted position and the insertion time can accurately and rapidly be detected. (Horiuchi, T.)

  2. A comparison of core degradation phenomena in the CORA, QUENCH, Phébus SFD and Phébus FP experiments

    Energy Technology Data Exchange (ETDEWEB)

    Haste, T., E-mail: tim.haste@irsn.fr [Institut de Radioprotection et de Sûreté Nucléaire, IRSN, BP 3, F-13115 St. Paul-lez-Durance Cedex (France); Steinbrück, M., E-mail: martin.steinbrueck@kit.edu [Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen (Germany); Barrachin, M., E-mail: marc.barrachin@irsn.fr [Institut de Radioprotection et de Sûreté Nucléaire, IRSN, BP 3, F-13115 St. Paul-lez-Durance Cedex (France); Luze, O. de, E-mail: olivier.de-luze@irsn.fr [Institut de Radioprotection et de Sûreté Nucléaire, IRSN, BP 3, F-13115 St. Paul-lez-Durance Cedex (France); Grosse, M., E-mail: mirco.grosse@kit.edu [Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen (Germany); Stuckert, J., E-mail: juri.stuckert@kit.edu [Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen (Germany)

    2015-03-15

    Highlights: • The results of the experiments CORA, QUENCH and Phébus SFD/FP are summarised. • All phenomena expected up to melt movement to the lower head are shown consistently. • Separate-effect tests performed at KIT and IRSN aid improve their modelling. • Data from the integral tests help independent validation of new and improved models. • The improved codes will help reduce uncertainties in safety-critical areas for core degradation. - Abstract: Over the past 20 years, integral fuel bundle experiments performed at IRSN Cadarache, France (Phébus-SFD and Phébus FP – fission heated) and at Karlsruhe Institute of Technology, Germany (CORA and QUENCH – electrically heated), accompanied by separate-effect tests, have provided a wealth of detailed information on core degradation phenomena that occur under severe accident conditions, relevant to such safety issues as in-vessel retention of the core, recovery of the core by water reflood, hydrogen generation and fission product release. These data form an important basis for development and validation of severe accident analysis codes such as ASTEC (IRSN/GRS, EC) and MELCOR (USNRC/SNL, USA) that are used to assess the safety of current and future reactor designs, so helping to reduce the uncertainty associated with such code predictions. Following the recent end of the Phébus FP project, it is appropriate now to compare the core degradation phenomena observed in these four major experimental series, indicating the main conclusions that have been drawn. This covers subjects such as early phase degradation up to loss of rod-like geometry (all the series), late phase degradation and the link between fission product release and core degradation (Phébus FP), oxidation phenomena (all the series), reflood behaviour (CORA and QUENCH), as well as particular topics such as the effects of control rod material and fuel burn-up on core degradation. It also outlines the separate-effects experiments performed to

  3. 77 FR 5295 - Over-the-Road Bus Accessibility Program Announcement of Project Selections

    Science.gov (United States)

    2012-02-02

    ... by Section 3038 of the Transportation Equity Act for the 21st Century (TEA-21). The OTRB... FTA's Transportation Electronic Awards Management System (TEAM) for the projects identified in Tables... TRANSPORTATION Federal Transit Administration Over-the-Road Bus Accessibility Program Announcement of...

  4. High voltage bus and auxiliary heater control system for an electric or hybrid vehicle

    Science.gov (United States)

    Murty, Balarama Vempaty

    2000-01-01

    A control system for an electric or hybrid electric vehicle includes a vehicle system controller and a control circuit having an electric immersion heater. The heater is electrically connected to the vehicle's high voltage bus and is thermally coupled to a coolant loop containing a heater core for the vehicle's climate control system. The system controller responds to cabin heat requests from the climate control system by generating a pulse width modulated signal that is used by the control circuit to operate the heater at a duty cycle appropriate for the amount of cabin heating requested. The control system also uses the heater to dissipate excess energy produced by an auxiliary power unit and to provide electric braking when regenerative braking is not desirable and manual braking is not necessary. The control system further utilizes the heater to provide a safe discharge of a bank of energy storage capacitors following disconnection of the battery or one of the high voltage connectors used to transmit high voltage operating power to the various vehicle systems. The control circuit includes a high voltage clamping circuit that monitors the voltage on the bus and operates the heater to clamp down the bus voltage when it exceeds a pre-selected maximum voltage. The control system can also be used to phase in operation of the heater when the bus voltage exceeds a lower threshold voltage and can be used to phase out the auxiliary power unit charging and regenerative braking when the battery becomes fully charged.

  5. What is a clean bus? Object conflicts in the greening of urban transit

    Directory of Open Access Journals (Sweden)

    David Hess

    2007-03-01

    Full Text Available Object conflicts—struggles over the design, definition, and diffusion of technologies—are analyzed to understand the changing history of the greening of bus technologies in the United States from the late 1980s to 2006. Conflicts are examined over the controversy between compressed natural gas (CNG and emissions-controlled diesel (ECD buses in four fields: regulations, research on emissions differences, fleet-purchase decisions, and political mobilizations from bus users and environmental justice groups. Given rapidly changing scientific research on emissions and health effects and rapidly changing bus technology, controversies tend not to stabilize or close for long. In general, the trend has been for some of the largest city bus fleets to reverse pro-CNG decisions in favor of ECD. A framework for the analysis of “object conflicts” is developed to elucidate the factors behind the choices between ECD and CNG and to provide a general model for thinking about technology politics and sustainability.

  6. 49 CFR 571.220 - Standard No. 220; School bus rollover protection.

    Science.gov (United States)

    2010-10-01

    .... S3. Applicability. This standard applies to school buses. S4. Requirements. When a force in Newtons.... S1. Scope. This standard establishes performance requirements for school bus rollover protection. S2... procedures. Each vehicle shall be capable of meeting the requirements of S4. when tested in accordance...

  7. Bus.py: A GridLAB-D Communication Interface for Smart Distribution Grid Simulations

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, Timothy M.; Palmintier, Bryan; Suryanarayanan, Siddharth; Maciejewski, Anthony A.; Siegel, Howard Jay

    2015-07-03

    As more Smart Grid technologies (e.g., distributed photovoltaic, spatially distributed electric vehicle charging) are integrated into distribution grids, static distribution simulations are no longer sufficient for performing modeling and analysis. GridLAB-D is an agent-based distribution system simulation environment that allows fine-grained end-user models, including geospatial and network topology detail. A problem exists in that, without outside intervention, once the GridLAB-D simulation begins execution, it will run to completion without allowing the real-time interaction of Smart Grid controls, such as home energy management systems and aggregator control. We address this lack of runtime interaction by designing a flexible communication interface, Bus.py (pronounced bus-dot-pie), that uses Python to pass messages between one or more GridLAB-D instances and a Smart Grid simulator. This work describes the design and implementation of Bus.py, discusses its usefulness in terms of some Smart Grid scenarios, and provides an example of an aggregator-based residential demand response system interacting with GridLAB-D through Bus.py. The small scale example demonstrates the validity of the interface and shows that an aggregator using said interface is able to control residential loads in GridLAB-D during runtime to cause a reduction in the peak load on the distribution system in (a) peak reduction and (b) time-of-use pricing cases.

  8. Design of interference-imaging spectrum data transmission Card Based on PCI Bus

    Institute of Scientific and Technical Information of China (English)

    Ma,Dongmei; Gao,Wei; Wang,Xinfeng

    2005-01-01

    Take the interference-imaging spectrometer for example, the paper analyses the characters of the spectrum-forming signals and their timing sequence. Then inspects the key technology in the interference-imaging spectrum data transmission system, and indicates a design for the system-which is based on computer PCI bus with CPLD technique imbedded. The system's circuitry and function are also presented.

  9. The Effectiveness of External Bus Speaker Systems for Persons Who Are Visually Impaired.

    Science.gov (United States)

    Wiener, William R.; Ponchillia, Paul; Joffee, Elga; Rutberg-Kuskin, Judith; Brown, John

    2000-01-01

    Two studies examined the effectiveness of external-speaker announcements in identifying incoming buses to 21 adults with visual impairments, including the placement of external speakers, the ability to understand simultaneous bus announcements, and the speech enhancement of announcements. Announcements could be heard above ambient traffic sounds…

  10. 76 FR 13580 - Bus Testing; Calculation of Average Passenger Weight and Test Vehicle Weight

    Science.gov (United States)

    2011-03-14

    ... Federal Register (74 FR 51083) that incorporated brake performance and emissions tests into FTA's bus... Weight Per Person (See, ``Passenger Weight and Inspected Vessel Stability Requirements: Final Rule, 75 FR... Transportation (44 FR 11032). Executive Order 12866 requires agencies to regulate in the ``most...

  11. Evolution of a 100 Mpbps fiber optic serial data bus for aerospace applications

    Science.gov (United States)

    Uhlhorn, R. W.; Geeslin, A. E.; Otten, T. H.

    Future aircraft and spacecraft will incorporate high speed data buses connecting avionics subsystems immersed in an electromagnetically hostile environment. The benefits of using fiber optics as the data transfer medium of choice for such systems are well known. Anticipating the use of high speed fiber optic data buses in avionics systems of the future, a company-sponsored program was initiated to explore component-through-system aspects of the technology. This paper describes the evolutionary steps in the development of a 100 Mbps Serial Fiber Optic Data Bus for aerospace applications. Beginning with a discussion of several possible protocols and applications, the development of each major subsystem is discussed. A token passing protocol is used to maximize bus efficiency. Development hardware supporting a 32 terminal network including an LED transmitter, APD receiver and user interface equipment, as well as test results from evaluation of the bus receivers and transmitters in a bus signaling environment, are described. Testing methods are discussed and test results are presented.

  12. Life-cycle assessment of diesel, natural gas and hydrogen fuel cell bus transportation systems

    Science.gov (United States)

    Ally, Jamie; Pryor, Trevor

    The Sustainable Transport Energy Programme (STEP) is an initiative of the Government of Western Australia, to explore hydrogen fuel cell technology as an alternative to the existing diesel and natural gas public transit infrastructure in Perth. This project includes three buses manufactured by DaimlerChrysler with Ballard fuel cell power sources operating in regular service alongside the existing natural gas and diesel bus fleets. The life-cycle assessment (LCA) of the fuel cell bus trial in Perth determines the overall environmental footprint and energy demand by studying all phases of the complete transportation system, including the hydrogen infrastructure, bus manufacturing, operation, and end-of-life disposal. The LCAs of the existing diesel and natural gas transportation systems are developed in parallel. The findings show that the trial is competitive with the diesel and natural gas bus systems in terms of global warming potential and eutrophication. Emissions that contribute to acidification and photochemical ozone are greater for the fuel cell buses. Scenario analysis quantifies the improvements that can be expected in future generations of fuel cell vehicles and shows that a reduction of greater than 50% is achievable in the greenhouse gas, photochemical ozone creation and primary energy demand impact categories.

  13. 49 CFR Appendix A to Part 665 - Tests To Be Performed at the Bus Testing Facility

    Science.gov (United States)

    2010-10-01

    .... When appropriate, Society of Automotive Engineers (SAE) test procedures and other procedures accepted... and Distortion Tests (1) A shakedown of the bus structure should be conducted by loading and unloading... structure. This test should be repeated a second time, and should be repeated up to one more time if...

  14. Re?bus disainivõistlus ehk noored innovaatorid bussirevolutsiooni otsinguil

    Index Scriptorium Estoniae

    2005-01-01

    2005. a. algul agentuuri APCI (Agence pour la Promotion de la Creation Industrielle) poolt korraldatud disainivõistlusest Re?bus. Eestist valiti 30 finalisti hulka büroo ZiZi & YoYo töö. Edukamad võistlustööd olid juuni algul väljas rahvusvahelise ühistranspordi assotsiatsiooni (UITP) 56. kongressil Roomas

  15. Connecticut Transit (CTTRANSIT) Fuel Cell Transit Bus: Second Evaluation Report and Appendices

    Energy Technology Data Exchange (ETDEWEB)

    Chandler, K.; Eudy, L.

    2009-05-01

    This report describes operations at Connecticut Transit (CTTRANSIT) in Hartford for one prototype fuel cell bus and three new diesel buses operating from the same location. The evaluation period in this report (January 2008 through February 2009) has been chosen to coincide with a UTC Power propulsion system changeout that occurred on January 15, 2008.

  16. Public perception related to a hydrogen hybrid internal combustion engine transit bus demonstration and hydrogen fuel

    International Nuclear Information System (INIS)

    Hydrogen has been widely considered as a potentially viable alternative to fossil fuels for use in transportation. In addition to price competitiveness with fossil fuels, a key to its adoption will be public perceptions of hydrogen technologies and hydrogen fuel. This paper examines public perceptions of riders of a hydrogen hybrid internal combustion engine bus and hydrogen as a fuel source

  17. Voltage Sag Mitigation in Eight Bus System using D-Statcom For Power Quality Improvement

    Directory of Open Access Journals (Sweden)

    P. Venkata Kishore

    2010-04-01

    Full Text Available This work deals with modeling and simulation of multi bus system using D-STATCOM. Voltage sag is increased by connecting a heavy load. The sag is mitigated using D-STATCOM. The circuit models and simulation results are presented. The Simulation results are compared with the analytical results.

  18. More than Just Fun and Games: BSG and Glo-Bus as Strategic Education Instruments

    Science.gov (United States)

    Karriker, Joy H.; Aaron, Joshua R.

    2014-01-01

    Simulations like the BSG and Glo-Bus allow students the opportunity to practice their integrated, strategic management skills in a relatively risk-free environment or "live case." We review these games and address their strengths, along with the challenges associated with their classroom application. Because of their sound designs and…

  19. Study on the Calculation Models of Bus Delay at Bays Using Queueing Theory and Markov Chain

    Directory of Open Access Journals (Sweden)

    Feng Sun

    2015-01-01

    Full Text Available Traffic congestion at bus bays has decreased the service efficiency of public transit seriously in China, so it is crucial to systematically study its theory and methods. However, the existing studies lack theoretical model on computing efficiency. Therefore, the calculation models of bus delay at bays are studied. Firstly, the process that buses are delayed at bays is analyzed, and it was found that the delay can be divided into entering delay and exiting delay. Secondly, the queueing models of bus bays are formed, and the equilibrium distribution functions are proposed by applying the embedded Markov chain to the traditional model of queuing theory in the steady state; then the calculation models of entering delay are derived at bays. Thirdly, the exiting delay is studied by using the queueing theory and the gap acceptance theory. Finally, the proposed models are validated using field-measured data, and then the influencing factors are discussed. With these models the delay is easily assessed knowing the characteristics of the dwell time distribution and traffic volume at the curb lane in different locations and different periods. It can provide basis for the efficiency evaluation of bus bays.

  20. Bus application of oxygen-enrichment technology and diesel-electric hybrid systems

    Energy Technology Data Exchange (ETDEWEB)

    Sekar, R.R.; Marr, W.W.

    1993-10-01

    The amendments to the Clean Air Act (CAA) mandate very strict limits on particulate, smoke, and other emissions from city buses. The use of alternative fuels, such as compressed natural gas (CNG) or methanol, can help transit operators, such as the Chicago Transit Authority (CTA), meet the mandated limits. However, the capital investment needed to convert the fueling infrastructure and buses is large, as is the expense of training personnel. If a {open_quotes}clean diesel{close_quotes} bus can be implemented with the help of oxygen-enrichment technology or a diesel-electric hybrid system, this large investment could be postponed for many years. The Regional Transportation Authority (RTA) initiated this project to evaluate the possibility of applying these technologies to CTA buses. Argonne National Laboratory (ANL) conducted a limited number of engine tests and computer analyses and concluded that both concepts are practical and will help in a {open_quotes}clean diesel{close_quotes} bus that can meet the mandated limits of the CAA amendments. The oxygen enrichment of combustion air depends on the availability of a compact and economical membrane separator. Because the technology for this critical component is still under development, it is recommended that an actual bus demonstration be delayed until prototype membranes are available. The hybrid propulsion system is ready for the demonstration phase, and it is recommended that the CTA and RTA commence planning for a bus demonstration.

  1. Alternative fuel options for urban bus application in the Netherlands: a comparative study

    NARCIS (Netherlands)

    Bleuanus, W.A.J.; Hartikka, T.S.; Lange, R. de; Ligterink, N.E.; Breunesse, R.T.; Baert, R.S.G.

    2008-01-01

    Today, a large number of urban areas in the Netherlands face significant local air quality problems. One source of this local pollution is road traffic and, in urban areas, public transport by city bus. For this reason, there is a lot of interest in different opportunities to lower the harmful emiss

  2. Study on the Calculation Models of Bus Delay at Bays Using Queueing Theory and Markov Chain

    Science.gov (United States)

    Sun, Li; Sun, Shao-wei; Wang, Dian-hai

    2015-01-01

    Traffic congestion at bus bays has decreased the service efficiency of public transit seriously in China, so it is crucial to systematically study its theory and methods. However, the existing studies lack theoretical model on computing efficiency. Therefore, the calculation models of bus delay at bays are studied. Firstly, the process that buses are delayed at bays is analyzed, and it was found that the delay can be divided into entering delay and exiting delay. Secondly, the queueing models of bus bays are formed, and the equilibrium distribution functions are proposed by applying the embedded Markov chain to the traditional model of queuing theory in the steady state; then the calculation models of entering delay are derived at bays. Thirdly, the exiting delay is studied by using the queueing theory and the gap acceptance theory. Finally, the proposed models are validated using field-measured data, and then the influencing factors are discussed. With these models the delay is easily assessed knowing the characteristics of the dwell time distribution and traffic volume at the curb lane in different locations and different periods. It can provide basis for the efficiency evaluation of bus bays. PMID:25759720

  3. SunLine Transit Agency Fuel Cell Transit Bus: Fifth Evaluation Report (Report and Appendices)

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, L.; Chandler, K.

    2009-08-01

    This report describes operations at SunLine Transit Agency for a prototype fuel cell bus and five compressed natural gas (CNG) buses. This is the fifth evaluation report for this site, and it describes results and experiences from October 2008 through June 2009. These results are an addition to those provided in the previous four evaluation reports.

  4. SunLine Transit Agency Fuel Cell Transit Bus: Fourth Evaluation Report (Report and Appendices)

    Energy Technology Data Exchange (ETDEWEB)

    Chandler, K.; Eudy, L.

    2009-01-01

    This report describes operations at SunLine Transit Agency for a prototype fuel cell bus and five new compressed natural gas (CNG) buses. This is the fourth evaluation report for this site, and it describes results and experiences from April 2008 through October 2008. These results are an addition to those provided in the previous three evaluation reports.

  5. Impact of a walking school bus program on children's active commuting to school and physical activity

    Science.gov (United States)

    Walking School Buses (WSB) are groups of students, led to and from school by adults, in which students are picked up at designated "bus stops". The impact of WSB programs on students' active commuting to school (walking/cycling to school, ACS), and moderate-to vigorous-physical activity (MVPA) has n...

  6. General purpose interface bus for personal computers used in wind tunnel data acquisition

    Science.gov (United States)

    Puram, Chith K.

    1993-01-01

    The use of the general purpose interface bus IEEE-488 to met the special requirements of wind tunnel testing involving PCs is discussed. The gearing of instrumentation to minimize test time, the choice of software to meet computer memory constraints, the use of graphics for improved use of tunnel run time, and the choice of data acquisition equipment to remove bottlenecks are addressed.

  7. Delay-Insensitive Synchronization on a Message-Passing Architecture with an Open Collector Bus

    NARCIS (Netherlands)

    Bekker, H.; Dijkstra, E.J.

    1996-01-01

    The performance of some algorithms, running on a message passing computer; is limited by the high latency of global communications. To increase the performance, a simple open collector bus, operated by delay insensitive programs running on each processor can be used. We illustrate this by an example

  8. Traffic signal design and simulation for vulnerable road users safety and bus preemption

    Science.gov (United States)

    Lo, Shih-Ching; Huang, Hsieh-Chu

    2015-01-01

    Mostly, pedestrian car accidents occurred at a signalized interaction is because pedestrians cannot across the intersection safely within the green light. From the viewpoint of pedestrian, there might have two reasons. The first one is pedestrians cannot speed up to across the intersection, such as the elders. The other reason is pedestrians do not sense that the signal phase is going to change and their right-of-way is going to be lost. Developing signal logic to protect pedestrian, who is crossing an intersection is the first purpose of this study. In addition, to improve the reliability and reduce delay of public transportation service is the second purpose. Therefore, bus preemption is also considered in the designed signal logic. In this study, the traffic data of the intersection of Chong-Qing North Road and Min-Zu West Road, Taipei, Taiwan, is employed to calibrate and validate the signal logic by simulation. VISSIM 5.20, which is a microscopic traffic simulation software, is employed to simulate the signal logic. From the simulated results, the signal logic presented in this study can protect pedestrians crossing the intersection successfully. The design of bus preemption can reduce the average delay. However, the pedestrian safety and bus preemption signal will influence the average delay of cars largely. Thus, whether applying the pedestrian safety and bus preemption signal logic to an intersection or not should be evaluated carefully.

  9. Implementation of Transaction Level AMBA Bus Models Using SystemC

    Institute of Scientific and Technical Information of China (English)

    He Zhen; Cao Yang; Zhang Jun-xin; Ma Qin-sheng

    2004-01-01

    This paper deals with how to implement AMBA bus transaction level modeling in SystemC. There are two main techniques used in the whole modeling process, which consist of starting the platform modeling at the transaction level and using the uniformed modeling language--System C. According to the concepts of interface, port and hierarchical channel introduced in SystemC 2.0, the system of master-channel (AMBA bus) slave is created as the architecture of the AMBA bus transaction level model, which can make it more extendable. The port and interface classes of the model that are prone to program are defined in accordance with the SoC hierarchical design methodology. In addition, method calls, not signal communication, are used between different modules in the model, so the higher-level abstraction is achieved and the simulation performance is improved. The AMBA bus transaction level model is analyzed and certified by simulation experiment, and proved to be completely compliant to the AMBA specification 2.0.

  10. Minute ventilation of cyclists, car and bus passengers: an experimental study.

    NARCIS (Netherlands)

    Zuurbier, M.; Hoek, G.; van den Hazel, P.J.; Brunekreef, B.

    2009-01-01

    ABSTRACT: BACKGROUND: Differences in minute ventilation between cyclists, pedestrians and other commuters influence inhaled doses of air pollution. This study estimates minute ventilation of cyclists, car and bus passengers, as part of a study on health effects of commuters' exposure to air pollutan

  11. 公交车专用变速箱设计%Dedicated Bus Gearbox Design

    Institute of Scientific and Technical Information of China (English)

    冀勇彪

    2013-01-01

    Introduces the bus gearbox market demand and development prospect of domestic bus transmission, analyzes research status, in the bus transmission noise, sealing, manipulation of the special characteristics, analysis of bus control mechanism of gearbox, transmission mechanism failure mode, combinative company is real, in the structural design measures, complete a five-speed gearbox design of buses.%  介绍了公交车变速箱的市场需求及发展前景,分析了国内公交车变速箱的研究状况,针对公交车变速箱对噪音、密封性、操纵性的特殊特性,结合公司实际,对变过相关体结构,助力器及其与缓速器的接口进行了设计,完成五档公交车变速箱的设计。

  12. Made of modules - the Setra versatile bus; Aus Modulen kombiniert - die Baureihe Setra-Kombibus

    Energy Technology Data Exchange (ETDEWEB)

    Hamsten, B.; Stangl, G. [EvoBus GmbH, Stuttgart (Germany)

    1997-07-01

    Setra is in the process of replacing its most successful bus 200 UL which, with its many versions, was for more than ten years leader in the market saegment of intercity public service buses. The development of the new bus family, the `Kombibus` Kombi means versatile, was started from scratch. The entirely new bus is made from modules, and the consistency with which this idea was carried through is the real innovation. Not only are driveline and running gear standardised modules - this has been common practice with buses for a long time - but also the body in white, the components and fittings of the body, the equipment, and the many extras. With only four different cross sections through the passenger compartment a wide spectrum of buses is covered, ranging from a plain low-floor bus to the luxurious travel coach. The `Kombibus` permits the operator of a bus fleet to combine modules to make exactly the bus he requires without the need for a new type. At the same time, the manufacturer has gained the advantage of being able to serve a larger market segment with fewer parts and components, at lower cost and with a shorter delivery time. (orig.) [Deutsch] Setra ist dabei, die erfolgreiche Baureihe 200, die seit mehr als zehn Jahren Markftuehrer in dem Segment Ueberlandlinienbus ist, durch die von Grund auf neu entwickelte Familie `Kombibus` abzuloesen. Innovativ am `Kombibus` ist die Konsequenz, mit der das Modulkonzept auf alle Komponenten angewendet wurde. Nicht nur Triebstrang und Fahrwerk wurden danach festgelegt, sondern auch die Karosserie, ihr Rohbau ebenso wie ihre Ausruestung und das gesamte Zubehoer. Mit nur vier verschiedenen Querschnittsformen durch den Fahrgastraum wird ein Spektrum abgedeckt, welches vom nuechternen Niederflur- bis hin zum komfortablen Reisebus reicht. Den Betreibern von Omnibussen bietet der `Kombibus` die Moeglichkeit, sich den genau auf ihre Anforderungen zugeschnittenen Bus zusammenzustellen. Fuer den Hersteller ergibt sich der

  13. What is strenuous? Driving itself or the driving situation?

    OpenAIRE

    Schießl, Caroline; Vollrath, Mark; Altmüller, Tobias; Dambier, Michael; Kornblum, Christian

    2006-01-01

    To avoid driver overload, assistance systems can be adapted regarding the driver’s current strain. Physiological and performance workload measures require special sensors and are problematic concerning sensitivity and specificity. Within the presented study the driver’s stress level was estimated in real-driving based on an analysis of different driving manoeuvres and environmental factors. The analyses show that different driving manoeuvres result in significantly different subjective strain...

  14. 3.2Gbps multi-channel optical backplane bus demonstrator using photopolymer volume gratings

    Science.gov (United States)

    Bi, Hai; Choi, Jinho; Jiang, Wei; Han, Xuliang; Ellis, Jonathan; Chen, Ray T.

    2007-02-01

    A 3-slot optical backplane bus demonstrator based on glass substrate with photopolymer volume gratings array (PVGA) on top surface is built to allow 16 channels of data to be broadcast from central slot to two daughter slots or uploaded from any daughter slot to central slot. VCSELs and photodetectors packaged in the form of TO-46 can are assembled on top of each PVG and interleaved to reduce the crosstalk to below noise level. By carefully aligning the fabrication system, the incident angle deviation from Bragg condition is reduced to below 0.1° to maximize optical power delivery. The orientation and period of hologram fringes are uniform in the active area by collimating recording beams. Above 4.8Gbps aggregated data transmission is successfully demonstrated using the multi-channel system. Three computer mother boards using FPGA are made to verify the data transmission among the slots. Interface boards between the FPGA boards and optical transceivers are designed and fabricated to separate the implementation of digital layer and optical layer. Single channel transmissions with 3.2Gbps and even 10Gbps data rate are also tested with above 100uW input power, showing the potential to improve the total two-way bandwidth to above 102.4Gbps. Alignment tolerance of the optical interconnect system is investigated theoretically and experimentally. By analyzing the diffractive characteristics, the bandwidth limit of the optical layer is determined to be in the order of Terahertz. Design and fabrication issues are discussed for future optical backplane bus to make terahertz bandwidth into reality. Based on the experiments for Bit-interleaved Optical Backplane bus and Multi-channel optical backplane bus demonstrators, theoretical analysis of the bandwidth limit of the optical backplane bus using photopolymer volume gratings has been carried out.

  15. Dimensions of driving anger and their relationships with aberrant driving.

    Science.gov (United States)

    Zhang, Tingru; Chan, Alan H S; Zhang, Wei

    2015-08-01

    The purpose of this study was to investigate the relationship between driving anger and aberrant driving behaviours. An internet-based questionnaire survey was administered to a sample of Chinese drivers, with driving anger measured by a 14-item short Driving Anger Scale (DAS) and the aberrant driving behaviours measured by a 23-item Driver Behaviour Questionnaire (DBQ). The results of Confirmatory Factor Analysis demonstrated that the three-factor model (hostile gesture, arrival-blocking and safety-blocking) of the DAS fitted the driving anger data well. The Exploratory Factor Analysis on DBQ data differentiated four types of aberrant driving, viz. emotional violation, error, deliberate violation and maintaining progress violation. For the anger-aberration relation, it was found that only "arrival-blocking" anger was a significant positive predictor for all four types of aberrant driving behaviours. The "safety-blocking" anger revealed a negative impact on deliberate violations, a finding different from previously established positive anger-aberration relation. These results suggest that drivers with different patterns of driving anger would show different behavioural tendencies and as a result intervention strategies may be differentially effective for drivers of different profiles.

  16. THE IMPACT OF TEXT DRIVING ON DRIVING SAFETY

    Directory of Open Access Journals (Sweden)

    Sanaz Motamedi

    2016-09-01

    Full Text Available In an increasingly mobile era, the wide availability of technology for texting and the prevalence of hands-free form have introduced a new safety concern for drivers. To assess this concern, a questionnaire was first deployed online to gain an understanding of drivers’ text driving experiences as well as their demographic information. The results from 232 people revealed that the majority of drivers are aware of the associated risks with texting while driving. However, more than one-fourth of them still frequently send or read text messages while driving. In addition to the questionnaire, through the use of a virtual-reality driving simulator, this study examined drivers’ driving performance while they were engaged in some forms of text driving under different challenging traffic conditions. Through a blocked factorial experiment, drivers would either read a text message or respond to it with two levels of text complexity while using either hand-held or hands-free texting method. Their driving performance was assessed based on the number of driving violations observed in each scenario. Conclusions regarding the impacts of different forms of texting, text complexity, and response mode on drivers driving performance were drawn.

  17. Control rod drives

    International Nuclear Information System (INIS)

    Purpose: To improve the reliability of a device for driving an LMFBR type reactor control rod by providing a buffer unit having a stationary electromagnetic coil and a movable electromagnetic coil in the device to thereby avord impact stress at scram time and to simplify the structure of the buffer unit. Constitution: A non-contact type buffer unit is constructed with a stationary electromagnetic coil, a cable for the stationary coil, a movable electromagnetic coil, a spring cable for the movable coil, and a backup coil spring or the like. Force produced at scram time is delivered without impact by the attracting or repelling force between the stationary coil and the movable coil of the buffer unit. Accordingly, since the buffer unit is of a non-contact type, there is no mechanical impact and thus no large impact stress, and as it has simple configuration, the reliability is improved and the maintenance can be conducted more easily. (Yoshihara, H.)

  18. Do emotions drive psychosis?

    Directory of Open Access Journals (Sweden)

    João Guilherme Ribeiro

    2013-11-01

    Full Text Available Introduction: How important is the emotional life of persons who manifest psychotic symptoms? Aims: The aim of this paper is to review evidence on a causal role for emotions in psychotic processes. Methods: Selective review of literature on affective symptoms in psychoses, on emotions in the production of psychotic symptoms and on dopaminergic models of psychosis. Results: Affective symptoms are relevant across psychoses. Persons with schizophrenia have high levels of emotional reactivity and the intensification of negative affects not only is associated with but also precedes the intensification of psychotic symptoms, which is evidence that negative emotions drive the course of psychotic symptoms. Negative self‑representations are central in psychotic processes and can be the link between negative emotions and psychosis. Evidence favours the notion that persecutory delusions are consistent with negative affects and self‑representations, while grandiose delusions are consistent with a defensive amplification of positive affects and self‑representations. Shame has been proposed as the core emotional experience of psychosis, one in which the self becomes vulnerable to the external world, which is consistent with persecutory experiences. Assaults on the self, under the form of hostility in the family environment and society, are strong predictors of relapse and development of schizophrenia. Assaults on the self which induce social defeat are also strong stimulants of mesolimbic dopaminergic pathways, whose hyperactivity is associated with acute psychotic episodes and the experience of “aberrant salience”, put forward as a dopaminergic model of psychosis. Conclusions: The “defeat of the self” emerges as a central link that binds the experience of negative emotions to the expression of psychotic symptoms and its psychological and neurobiological correlates. The hypothesis gains support that the emotions related to that defeat control

  19. Do emotions drive psychosis?

    Directory of Open Access Journals (Sweden)

    João G. Ribeiro

    2012-12-01

    Full Text Available Introduction: How important is the emotional life of persons who manifest psychotic symptoms? Aims: The aim of this paper is to review evidence on a causal role for emotions in psychotic processes. Methods: Selective review of literature on affective symptoms in psychoses, on emotions in the production of psychotic symptoms and on dopaminergic models of psychosis. Results: Affective symptoms are relevant across psychoses. Persons with schizophrenia have high levels of emotional reactivity and the intensification of negative affects not only is associated with but also precedes the intensification of psychotic symptoms, which is evidence that negative emotions drive the course of psychotic symptoms. Negative self‑representations are central in psychotic processes and can be the link between negative emotions and psychosis. Evidence favours the notion that persecutory delusions are consistent with negative affects and self‑representations, while grandiose delusions are consistent with a defensive amplification of positive affects and self‑representations. Shame has been proposed as the core emotional experience of psychosis, one in which the self becomes vulnerable to the external world, which is consistent with persecutory experiences. Assaults on the self, under the form of hostility in the family environment and society, are strong predictors of relapse and development of schizophrenia. Assaults on the self which induce social defeat are also strong stimulants of mesolimbic dopaminergic pathways, whose hyperactivity is associated with acute psychotic episodes and the experience of “aberrant salience”, put forward as a dopaminergic model of psychosis. Conclusions: The “defeat of the self” emerges as a central link that binds the experience of negative emotions to the expression of psychotic symptoms and its psychological and neurobiological correlates. The hypothesis gains support that the emotions related to that defeat control

  20. Aggressive Driving Behavior: Undergraduate Students Study

    OpenAIRE

    Rungson Chomeya

    2010-01-01

    Problem statement: The main purposes of this research were (1) to study the aggressive driving behavior of graduate students, (2) to develop aggressive driving behavior standard test, (3) to compare the aggressive driving behavior between gender, years of study, academic achievement, driving confidence and driving experience and (4) to study the relationship among aggressive driving behavior, driving confidence, driving experience and accident experience. Approach: The subjects consisted of 4...