WorldWideScience

Sample records for bus drivers

  1. Redesign of Transjakarta Bus Driver's Cabin

    Science.gov (United States)

    Mardi Safitri, Dian; Azmi, Nora; Singh, Gurbinder; Astuti, Pudji

    2016-02-01

    Ergonomic risk at work stations with type Seated Work Control was one of the problems faced by Transjakarta bus driver. Currently “Trisakti” type bus, one type of bus that is used by Transjakarta in corridor 9, serving route Pinang Ranti - Pluit, gained many complaints from drivers. From the results of Nordic Body Map questionnaires given to 30 drivers, it was known that drivers feel pain in the neck, arms, hips, and buttocks. Allegedly this was due to the seat position and the button/panel bus has a considerable distance range (1 meter) to be achieved by drivers. In addition, preliminary results of the questionnaire using Workstation Checklist identified their complaints about uncomfortable cushion, driver's seat backrest, and the exact position of the AC is above the driver head. To reduce the risk level of ergonomics, then did research to design the cabin by using a generic approach to designing products. The risk analysis driver posture before the design was done by using Rapid Upper Limb Assessment (RULA), Rapid Entire Body Assessment (REBA), and Quick Exposure Checklist (QEC), while the calculation of the moment the body is done by using software Mannequin Pro V10.2. Furthermore, the design of generic products was done through the stages: need metric-matrix, house of quality, anthropometric data collection, classification tree concept, concept screening, scoring concept, design and manufacture of products in the form of two-dimensional. While the design after design risk analysis driver posture was done by using RULA, REBA, and calculation of moments body as well as the design visualized using software 3DMax. From the results of analysis before the draft design improvements cabin RULA obtained scores of 6, REBA 9, and the result amounted to 57.38% QEC and moment forces on the back is 247.3 LbF.inch and on the right hip is 72.9 LbF.in. While the results of the proposed improvements cabin design RULA obtained scores of 3, REBA 4, and the moment of force on

  2. 45 CFR 1310.17 - Driver and bus monitor training.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Driver and bus monitor training. 1310.17 Section... START PROGRAM HEAD START TRANSPORTATION Transportation Requirements § 1310.17 Driver and bus monitor... performance; and (2) before bus monitors assigned to vehicles used to provide such services begin their duties...

  3. Stress prevention in bus drivers: Evaluation of 13 natural experiments

    NARCIS (Netherlands)

    Kompier, M.A.J.; Aust, B.; Berg, A.M. van den; Siegrist, J.

    2000-01-01

    The research aim was to select, compare, and analyze interventions and preventive actions from international bus companies to decrease bus drivers' occupational stress and sickness absenteeism. Through networking, international surveys, and literature study, 13 "natural experiments" were identified

  4. Peptic ulcer among urban bus drivers in Denmark

    DEFF Research Database (Denmark)

    Netterstrøm, Bo; Juel, K

    1990-01-01

    As part of a survey on the work environment of bus drivers, 2045 (83%) of 2465 male bus drivers in the three major cities in Denmark in 1978 answered a postal questionnaire on health and working conditions. In order to evaluate the relative occurrence of peptic ulcer among the bus drivers, a follow......-up study was also conducted. All hospital discharges with a peptic ulcer diagnosis among the bus drivers were registered from the Danish National Patient Register. All Danish men were used as reference group. On the basis of the 1978-questionnaire association between occupational and psychosocial factors...... and subsequent hospital discharge with a peptic ulcer diagnosis was studied. The prevalence of abdominal pain alleviated by food intake was 12% among bus drivers and 6% in the reference group. The incidence of hospital discharge with duodenal ulcer among younger bus drivers was twice the incidence among Danish...

  5. Work fatigue in urban bus drivers

    Directory of Open Access Journals (Sweden)

    Teresa Makowiec-Dąbrowska

    2015-10-01

    Full Text Available Background: Bus drivers are a special group of professional drivers who are at a very high risk of fatigue. The aim of the study was to examine whether the driver’s subjective assessment of fatigue allows for the determination of its level and identification of its causes. Material and Methods: The study group comprised 45 randomly selected bus drivers (mean age – 43.7±7.9 years, period of employment as drivers – 14.7±8.6 years. Examinations were performed in all subjects four times – before and after work on the “easy” route (outside the city center, small traffic intensity and before and after work on the “difficult” route (city center, heavy traffic. The fatigue test questionnaire, based on the list of symptoms of fatigue prepared by the Japan Research Committee of Fatigue, was used in the study. Results: The rating of fatigue after the work was significantly higher than that before the work. The profile of fatigue after work was not influenced by the type of route, but the assessment of most symptoms of fatigue reached a higher level after the “difficult” routes and the differences were statistically significant for 7 symptoms. Only the ratings of leg fatigue, feeling of heaviness, and the necessity to squint eyes and gaze with effort reached the higher levels after driving the “easy” routes. It has been found that the level of fatigue was significantly correlated with the job characteristics (driving time, the length of the route, number of stops, etc. and with the abundance of food ingested and type of beverage (coffee vs. others drunk prior to driving. Conclusions: The questionnaire used in our study to assess the subjective feeling of fatigue has proved to be a sensitive and useful tool for indicating the level and causes of fatigue. The relationship between the symptoms of fatigue and the characteristics of job and lifestyle shows that actions must be taken by both the employers and employees to prevent fatigue

  6. Bullying and Aggression on the School Bus: School Bus Drivers' Observations and Suggestions

    Science.gov (United States)

    deLara, Ellen

    2008-01-01

    Every school day bus drivers are responsible for transporting children safely over many miles, yet they are rarely polled for their opinions or contributions to school safety. School bus drivers are in a unique position to inform the discussion on aggressive behavior during the school day. This exploratory study collected information from school…

  7. Shift work and arteriosclerosis risk in professional bus drivers.

    Science.gov (United States)

    Chen, Chun-Chieh; Shiu, Li-Jie; Li, Yu-Ling; Tung, Kuan-Yeng; Chan, Kwan-Yu; Yeh, Chih-Jung; Chen, Shiuan-Chih; Wong, Ruey-Hong

    2010-01-01

    Professional bus drivers are at increased risk for cardiovascular disease, but the underlying causes are unclear. Professional bus drivers often follow shift schedules. Especially, an association between shift work and early manifestations of cardiovascular disease has not been elucidated. Thus we investigated the links between shift work and arteriosclerosis risk in professional bus drivers. Questionnaires were administered to 184 bus drivers on demographic characteristics, lifestyle, and occupational history from 5 transportation companies in Taiwan. Brachial-ankle pulse wave velocity (baPWV) was measured using a volume-plethysmographic apparatus. Body mass index, waist circumference, biochemical variables, and blood pressure were also measured. Arteriosclerotic risk factors (age, weekly driving hours, systolic blood pressure, diastolic blood pressure, and insulin level) differed in part among different groups of drivers. Long-term shift drivers had higher baPWV compared to regular drivers and short-term shift drivers (1594 cm/s vs. 1497 and 1432, pshift driving. Long-term shift work could increase the risk of arteriosclerosis in professional bus drivers. Larger studies would be necessary to provide further evidence regarding this finding.

  8. A research framework for studying transit bus driver distraction.

    Science.gov (United States)

    2013-09-01

    The increase in transit bus ridership nationally during the past ten years, along with the : proliferation of personal electronic control and communication gadgets is causing more : distractions for the drivers. Earlier research studies have found dr...

  9. THE PREVALENCE OF MUSCULOSKELETAL DISORDERS AMONG BUS DRIVERS IN TRICITY

    Directory of Open Access Journals (Sweden)

    Lalit

    2015-10-01

    Full Text Available Background: Musculoskeletal disorders are widespread in many countries around the world. It has been reported that about 58 percent of the world's population over the age of 10 years spent one third of their life span at work. The population at a high risk include nursing facilities, transportation, mining, food processing, leather tanning, heavy and light manufacturing. Transport workers have been found to be at high risk of developing work related musculoskeletal disorders (WRMSDs. There has been literature evidence regarding the prevalence of musculoskeletal disorders in bus drivers of various cities of different countries. But no study has been done so far in Tricity (Chandigarh, Panchkula and Mohali for the same. The purpose of this study is to investigate the prevalence and characteristics of work related musculoskeletal disorders (WRMSDs among bus drivers of Tricity. Methods: 300 bus drivers were included in the study according to the inclusion and exclusion criteria. The standardized Nordic questionnaire for musculoskeletal disorder and a self administered questionnaire were filled by therapist after the personal interview of each driver. Results: Unpaired t test was used to measure the difference in variable of two groups and Karl Pearson’s correlation coefficient was used to determine the correlation between two entities. In the present study, the subjects were in the age group of 25 to 50 years. Out of the total sample of 300 male bus drivers in Tricity, 159 reported that they had WRMSDs. The prevalence of WRMSDs among bus drivers in Tricity was 53%. In present study, the prevalence of low back pain was highest among the bus drivers that are 30.3%, then neck pain 17.3%, knee pain 14.7%, shoulder 6.3%, ankle and feet 5.7%, upper back 4%, hip and thigh 4%, elbow 1.3% and wrist and hand 1.3%. Thus low back pain, neck pain and knee pain are the most prevalent WRMSDs amongst bus drivers. Conclusions: Work-related biomechanical

  10. Trajectories of Cigarette Smoking among Commercial Bus Drivers ...

    African Journals Online (AJOL)

    Trajectories of Cigarette Smoking among Commercial Bus Drivers and University Students in Nigeria. ... Thus, this article gathered comprehensive primary qualitative, quantitative and secondary data on smoking behaviors of two distinct groups in Nigeria for reliable comprehension of smoking trajectories in Nigeria with ...

  11. Measuring Bus Drivers' Occupational Stress Under Changing Working Conditions

    NARCIS (Netherlands)

    Hlotova, Y.; Cats, O.; Meijer, S.A.

    2014-01-01

    Stress is an immense problem in modern society; approximately half of all occupational illnesses are directly or indirectly related to stress. The work of a bus driver is typically associated with high stress levels that negatively influence individual well-being as well as workforce management. The

  12. Low back trouble among urban bus drivers in Denmark

    DEFF Research Database (Denmark)

    Netterstrøm, Bo; Juel, K

    1989-01-01

    herniation was 137 compared to all Danish men. These differences were statistically significant. Of psychosocial factors only "the feeling of being mentally unbalanced" was found to be statistically significantly related to subsequent hospital discharge with a LBT-diagnosis. Long seniority as bus driver...

  13. [Bus drivers' biomechanical risk assessment in two different contexts].

    Science.gov (United States)

    Baracco, A; Coggiola, M; Perrelli, F; Banchio, M; Martignone, S; Gullino, A; Romano, C

    2012-01-01

    The application of standardize methods for the biomechanical risk assessment in non-industrial cycled activity is not always possible. A typical case is the public transport sector, where workers complain of suffering for shoulder more than elbow and wrist pains. The Authors present the results of two studies involving two public transport companies and the risk of biomechanical overload of upper limbs for bus and tram drivers. The analysis has been made using three different approaches: focus groups; static analysis by using anthropometric manikins; work sampling technique by monitoring worker's activity and posture at each minute, for two hours and for each binomial vehicle-route, considering P5F e P95M drivers and assessing the perceived efforts thorough the Borg's CR10 Scale. The conclusive results show that the ergonomic analysis managed by multiple non-standardized techniques may reach consistent and repeatable results according to the epidemiological evidences.

  14. Occupational safety conditions of bus drivers in Metro Manila, the Philippines.

    Science.gov (United States)

    Santos, Jewelle Ann; Lu, Jinky Leilanie

    2016-12-01

    The study looks into the occupational safety and working conditions among bus drivers in Metro Manila, the Philippines. Quantitative data were collected through survey interviews of 95 bus drivers using the stratified sampling technique. Results showed that bus drivers worked an average of 16 h/day and were engaged in risky driving behaviors such as over-speeding and road racing in order to reach their quota for the day. Fifty-nine percent experienced work-related accidents, with a mean of three accidents. The most common accident was hitting another vehicle followed by side swipe. The accidents were blamed on other drivers, followed by vehicle defect, inattentiveness and tiredness/micro-sleep or sudden involuntary sleep while driving. The most common health symptoms experienced by the bus drivers were fatigue, back pain, and cough and colds. This study underlines the need for an occupational health and safety program for bus drivers in the Philippines.

  15. Common Traffic Violations of Bus Drivers in Urban China: An Observational Study.

    Directory of Open Access Journals (Sweden)

    Qiqi Wang

    Full Text Available To report common traffic violations in bus drivers and the factors that influence those violations in urban China.We conducted an observational study to record three types of traffic violations among bus drivers in Changsha City, China: illegal stopping at bus stations, violating traffic light signals, and distracted driving. The behaviors of bus drivers on 32 routes (20% of bus routes in the city were observed. A two-level Poisson regression examined factors that predicted bus driver violations.The incidence of illegal stopping at bus stations was 20.2%. Illegal stopping was less frequent on weekends, sunny days, and at stations with cameras, with adjusted incidence rate ratios (IRRs of 0.81, 0.65 and 0.89, respectively. The incidence of violating traffic light signals was 2.2%, and was lower on cloudy than sunny days (adjusted IRR: 0.60. The incidence of distracted driving was 3.3%. The incidence of distracted driving was less common on cloudy days, rainy or snowy days, and foggy/windy/dusty days compared to sunny days, with adjusted IRRs of 0.54, 0.55 and 0.07, respectively.Traffic violations are common in bus drivers in urban China and they are associated with the date, weather, and presence of traffic cameras at bus station. Further studies are recommended to understand the behavioral mechanisms that may explain bus driver violations and to develop feasible prevention measures.

  16. The effect of an active steering system on city bus drivers muscle activity.

    Science.gov (United States)

    Ahlström, Christer; Gink Lövgren, Maria; Nilsson, Mats; Willstrand, Tania; Anund, Anna

    2018-02-26

    City bus drivers spend hours driving under time pressure, in congested traffic and in a monotonous sitting position. This leads to unhealthy working conditions, especially in terms of physical and psychological stress. The aim of this study is to investigate if an active steering system can alleviate the musculoskeletal stress involved in manoeuvring a bus. Twenty bus drivers drove a city bus equipped with the Volvo dynamic steering (VDS) support system in real traffic. Steering effort was evaluated with fyography and with a questionnaire. Compared to baseline, VDS significantly reduced the required muscle activity by on average 15 - 25 % while turning, and with up to 68 % in the part of the manoeuvre requiring maximum effort. The bus drivers believed that VDS will help reduce neck and shoulder problems, and they expressed a desire to have VDS installed in their own bus.

  17. Effects of Self Stretching on Pain and Musculoskeletal Symptom of Bus Drivers

    OpenAIRE

    Lee, Jung-Ho; Gak, Hwang Bo

    2014-01-01

    [Purpose] The aim of this study was to evaluate the musculoskeletal symptoms, pain and risk of postures as well as the effects of stretching exercise on the work-related symptoms and pain of bus drivers. [Subjects and Methods] Eighty-one drivers were randomly recruited from a bus corporation for this study. Information about pain levels, painful regions, and general characteristics of subjects was obtained using the symptom research form (KOSHA Code H-30-2003). The level of pain was assessed ...

  18. Low back pain among professional bus drivers: ergonomic and occupational-psychosocial risk factors.

    Science.gov (United States)

    Alperovitch-Najenson, Deborah; Santo, Yoav; Masharawi, Youssef; Katz-Leurer, Michal; Ushvaev, Diana; Kalichman, Leonid

    2010-01-01

    Professional drivers have been found to be at high risk for developing low back pain. However, the exact reasons are poorly understood. To assess the prevalence of LBP among Israeli professional urban bus drivers, and evaluate the association between LBP in drivers and work-related psychosocial and ergonomic risk factors. A total of 384 male full-time urban bus drivers were consecutively enrolled to this cross-sectional study. Information on regular physical activity and work-related ergonomic and psychosocial stressing factors was collected during face-to-face interviews. The prevalence of LBP was assessed using the Standardized Nordic Questionnaire. From the total cohort, 164 bus drivers (45.4%) reported experiencing LBP in the previous 12 months. Ergonomic factors associated with LBP were uncomfortable seat (odds ratio 2.6, 95% confidence interval 1.4-5.0) and an uncomfortable back support (OR 2.5, 95% CI 1.4-4.5). In the group of drivers with LBP, 48.5% reported participation in regular physical activities vs. 67.3% in the group without LBP (Prelated ergonomic and psychosocial factors showed a significant association with LBP in Israeli professional urban bus drivers. Prevention of work-related stress, organizational changes targeted to reduce stressful situations, improvement in seat comfort, and encouraging regular sports activity need to be evaluated as prevention strategies for LBP in professional bus drivers.

  19. The impact of bus drivers ’ lifestyle on the occurrence of health problems and absenteeism

    Directory of Open Access Journals (Sweden)

    Andrej Jerman

    2016-06-01

    Full Text Available Research Question: Do bus drivers’ lifestyles affect the occurrence of health problems and absenteeism? Purpose: The purpose of the study was to determine whether the lifestyle of professional bus drivers affects the occurrence of health problems and the phenomenon of absenteeism. Method: A quantitative research method was used in the research. Data were collected using a structured questionnaire, on a sample of 230 professional bus drivers from different bus transport companies in Slovenia. Selected data were analyzed with chi-square test and multiple regression analysis. Results: We determined that there is a relationship between the state of health of professional bus drivers and participation in sport activity and that there is a statistically significant impact of lifestyle on the absenteeism of professional bus drivers. Organization: The study points to the necessity of management’s awareness to improve the conditions for the health status of employees and, consequently, absenteeism. Managers need to be more vigilant in ensuring conditions and social security that will allow employees a higher quality lifestyle. Society: The poor quality lifestyle of professional bus drivers, which includes different addictions, inadequate physical activity, and poor working conditions, is a significant factor causing absenteeism. All these factors influence the onset of negative consequences, such as the direct cost of compensation payments, costs of replacing the absent person, a reduction in productivity, which in turn affect economic growth and the high cost of health care. Originality: This is the first focus group study of professional bus drivers that targets lifestyle and its connection to absenteeism. Limitations/Future Research: The main limitation of the study is the number of respondents. The reason for this is that professional drivers are less responsive in the survey and that the study was conducted only in Slovenia, country of two

  20. Annoyance evaluation and the effect of noise on the health of bus drivers.

    Science.gov (United States)

    Bruno, Portela S; Marcos, Queiroga R; Amanda, Constantini; Paulo, Zannin H T

    2013-01-01

    In the present study, we evaluated annoyance and the effects of noise on the health of bus drivers. For that, 200 bus drivers from a public transport company participated in a cross-sectional study. Annoyance and effects on health was measured with analog scale: Sleep quality, occurrence of tinnitus, headache, irritation, and annoyance from bus engine, traffic, and passengers. Data of age and working time of bus drivers also were obtained. For noise exposure, LA eq was evaluated in 80 buses. Statistical analysis consisted of mean, standard deviation, minimum, and maximum, Kruskal-Wallis test with post-hoc Dunn, one-way ANOVA with post-hoc Tukey and Spearman's correlation coefficient. Results indicate three groups of bus drivers (not annoyed: (N.A.), a little annoyed (L.A.) and highly annoyed (H.A.)). The group H.A. was younger and with less working time in relation to others, with a significant difference only for age. Regarding sleep quality, there was no significant difference. For results on the occurrence of tinnitus, headache and irritation after work, group H.A. had significantly higher means. Result of annoyance to the bus engine was significantly higher in H.A. than in L.A. and N.A. Annoyance to traffic and passengers, no significant differences were found, but the highest results were found for L.A., followed by H.A. and N.A. Equivalent sound pressure level in buses was above of the limit for occupational comfort. It was concluded that bus drivers has considerable level of noise annoyance and some health effects are perceived. The noise is a factor discomfort ergonomic that may cause effects on health of bus drivers. This study aims to evaluate annoyance and the effects of noise on the health of bus drivers. Cross-sectional study with buses and bus drivers. For that, 200 bus drivers from a public transport company participated in a cross-sectional study. Annoyance and effects on health was measured with analog scale: Sleep quality, occurrence of tinnitus

  1. Annoyance evaluation and the effect of noise on the health of bus drivers

    Directory of Open Access Journals (Sweden)

    Portela S Bruno

    2013-01-01

    Full Text Available In the present study, we evaluated annoyance and the effects of noise on the health of bus drivers. For that, 200 bus drivers from a public transport company participated in a cross-sectional study. Annoyance and effects on health was measured with analog scale: Sleep quality, occurrence of tinnitus, headache, irritation, and annoyance from bus engine, traffic, and passengers. Data of age and working time of bus drivers also were obtained. For noise exposure, LA eq was evaluated in 80 buses. Statistical analysis consisted of mean, standard deviation, minimum, and maximum, Kruskal-Wallis test with post-hoc Dunn, one-way ANOVA with post-hoc Tukey and Spearman′s correlation coefficient. Results indicate three groups of bus drivers (not annoyed: (N.A., a little annoyed (L.A. and highly annoyed (H.A.. The group H.A. was younger and with less working time in relation to others, with a significant difference only for age. Regarding sleep quality, there was no significant difference. For results on the occurrence of tinnitus, headache and irritation after work, group H.A. had significantly higher means. Result of annoyance to the bus engine was significantly higher in H.A. than in L.A. and N.A. Annoyance to traffic and passengers, no significant differences were found, but the highest results were found for L.A., followed by H.A. and N.A. Equivalent sound pressure level in buses was above of the limit for occupational comfort. It was concluded that bus drivers has considerable level of noise annoyance and some health effects are perceived. The noise is a factor discomfort ergonomic that may cause effects on health of bus drivers. This study aims to evaluate annoyance and the effects of noise on the health of bus drivers. Cross-sectional study with buses and bus drivers. For that, 200 bus drivers from a public transport company participated in a cross-sectional study. Annoyance and effects on health was measured with analog scale: Sleep quality

  2. Signs of musculoskeletal disorders in bus drivers and fare collectors

    Directory of Open Access Journals (Sweden)

    Malú de Oliveira Freire

    2007-09-01

    Full Text Available To describe the signs of musculoskeletal disorders (SMD in drivers and fare ollectors and to investigate their association with hours worked per day, nutritional status and level of physical activity (PA. A cross-sectional study undertaken with 40 bus drivers and 39 fare collectors working intercity routes. The “Nordic Musculoskeletal Questionnaire” was used to identify SMD. The working day was defi ned according to median values ( ABSTRACT O objetivo deste estudo foi descrever os sintomas de distúrbios osteomusculares (SDO em motoristas e cobradores de ônibus e investigar sua associação com jornada de trabalho, estado nutricional e nível de atividade física. Estudo transversal realizado com 40 motoristas e 39 cobradores de ônibus de viagens intermunicipais. Os SDO foram verificados, utilizando-se o Questionário Nórdico de Sintomas Osteomusculares. A jornada de trabalho foi categorizada a partir dos valores da mediana (< 8 horas e ≥ 8 horas. O índice de massa corporal (IMC foi usado para verificar o estado nutricional. O nível de atividade física foi avaliado, usando-se o Questionário Internacional de Atividade Física (versão curta. As associações foram verifi cadas por teste qui-quadrado. A freqüência de dor em alguma região do corpo (últimos 12 meses foi de 70,0% e 76,9% para motoristas e cobradores respectivamente; 30,0% dos motoristas e 33,3% dos cobradores referiram dor nos últimos 7 dias; 26,6% e 33,3% dos motoristas e cobradores, respectivamente, tiveram que evitar o trabalho devido às dores. As maiores prevalências (últimos 12 meses foram observadas nas seguintes regiões anatômicas: ombros (32,5%, para motoristas e; lombar (48,7%, para cobradores. Houve diferença significativa (p = 0,029 entre motoristas e cobradores quanto ao relato de dor na região “lombar”. A prevalência de sobrepeso foi maior nos motoristas (72,0% do que nos cobradores (33,3%, as diferenças foram signifi cativas (p = 0

  3. An on-road study of sleepiness in split shifts among city bus drivers.

    Science.gov (United States)

    Anund, Anna; Fors, Carina; Ihlström, Jonas; Kecklund, Göran

    2017-05-12

    Bus drivers often work irregular hours or split shifts and their work involves high levels of stress. These factors can lead to severe sleepiness and dangerous driving. This study examined how split shift working affects sleepiness and performance during afternoon driving. An experiment was conducted on a real road with a specially equipped regular bus driven by professional bus drivers. The study had a within-subject design and involved 18 professional bus drivers (9 males and 9 females) who drove on two afternoons; one on a day in which they had driven early in the morning (split shift situation) and one on a day when they had been off duty until the test (afternoon shift situation). The hypothesis tested was that split shifts contribute to sleepiness during afternoon, which can increase the safety risks. The overall results supported this hypothesis. In total, five of the 18 drivers reached levels of severe sleepiness (Karolinska Sleepiness Scale ≥8) with an average increase in KSS of 1.94 when driving in the afternoon after working a morning shift compared with being off duty in the morning. This increase corresponded to differences observed between shift workers starting and ending a night shift. The Psychomotor Vigilance Task showed significantly increased response time with split shift working (afternoon: 0.337s; split shift 0.347s), as did the EEG-based Karolinska Drowsiness Score mean/max. Blink duration also increased, although the difference was not significant. One driver fell asleep during the drive. In addition, 12 of the 18 bus drivers reported that in their daily work they have to fight to stay awake while driving at least 2-4 times per month. While there were strong individual differences, the study clearly showed that shift-working bus drivers struggle to stay awake and thus countermeasures are needed in order to guarantee safe driving with split shift schedules. Copyright © 2017. Published by Elsevier Ltd.

  4. Research and implementation of intelligent gateway driver layer based on Linux bus

    Directory of Open Access Journals (Sweden)

    ZHANG Jian

    2016-10-01

    Full Text Available Currently,in the field of smart home,there is no relevant organization that yet has proposed an unified protocol standard.It increases the complexity and limitations of heterogeneous gateway software framework design that different vendor′s devices have different communication mode and protocol standards.In this paper,a serial of interfaces are provided by Linux kernel,and a virtual bus is registered under Linux.The physical device drivers are able to connect to the virtual bus.The detailed designs of the communication protocol are placed in the underlying adapters,making the integration of heterogeneous networks more natural.At the same time,designing the intelligent gateway system driver layer based on Linux bus can let the application layer be more unified and clear logical.And it also let the hardware access network become more convenient and distinct.

  5. Shift sequences, duration of rest periods, and accident risk of bus drivers

    NARCIS (Netherlands)

    Pokorny, M.L.I.; Blom, D.H.J.; Leeuwen, P. van; Nooten, W.N. van

    1987-01-01

    This paper presents a portion of the results of a comprehensive analysis of the etiology of bus driver accidents. This portion of the analysis concentrates on two questions. First, does the sequences of various shifts influence accident risk on a given day? Various analyses led us to conclude that

  6. Effects of self stretching on pain and musculoskeletal symptom of bus drivers.

    Science.gov (United States)

    Lee, Jung-Ho; Gak, Hwang Bo

    2014-12-01

    [Purpose] The aim of this study was to evaluate the musculoskeletal symptoms, pain and risk of postures as well as the effects of stretching exercise on the work-related symptoms and pain of bus drivers. [Subjects and Methods] Eighty-one drivers were randomly recruited from a bus corporation for this study. Information about pain levels, painful regions, and general characteristics of subjects was obtained using the symptom research form (KOSHA Code H-30-2003). The level of pain was assessed on a scale of numeric rating scale (NRS) which is divided by 10. Ergonomic posture assessment was conducted using the rapid upper limb assessment (RULA). Self-stretching exercise was performed for 4 weeks by the bus drivers who suffered from neck and shoulder pain. [Results] Musculoskeletal symptoms were present in the order of shoulder, neck, lower back and lower extremities. Compared with other jobs, the final score, and the action level of bus drivers were very high, showing 57.6% of action levels 3 and 4. A statistically significant decrease of pain was shown after the self-stretching intervention. There was also a significant decrease of musculoskeletal symptoms in the neck and shoulders after the self-stretching exercise. [Conclusion] Performing stretching for musculoskeletal symptoms had a positive influence on the symptoms and reduced pain.

  7. The Effect of Working Conditions to the Health Status in Taxi and Bus Drivers in Canakkale, Turkey; Community Based Study

    Directory of Open Access Journals (Sweden)

    Aysegul Uludag

    2016-04-01

    Full Text Available Aim: The growing taxi and bus driver workforce is at risk for poor health status, obesity, hypertension, metabolic syndrome and with increased risk for cardiovascular disease. We aimed to determine the relationship between working conditions and health status in taxi and bus drivers. Material and Method: This study is a descriptive study. The population of the study was taxi and bus drivers in central of Canakkale. There were total 250 taxi and bus drivers who registered in The Chamber of Canakkale Drivers and Vehicle. We reached the 70 taxi drivers and 93 bus drivers. The participants were visited at their workplace. We performed the questionnaire that include the socio-demografic features, habits, the working conditions. We evaluated the blood pressure, waist-hip measurements and capillary blood glucose at any time. Results: Total of the 163 men drivers were enrolled the study. Nine (12.9% taxi drivers and 6 (6.5% bus drivers were hipertensive, and 1 taxi driver and 2 bus drivers with random capillary blood glucose levels higher than 200 mg. The prevalence of hypertension was 9.2%, diabetes mellitus was 1.8, obesity was 49.4%. Discussion: Drivers have many risk factors for CVD like stress and immobility. In our study, the socio-demografic and working conditions are limited for explaining the risk for hipertension, diabetes mellitus and obesity in drivers in Canakkale. These study have to be done in metropolitan cities. In this aspect, the drivers can be evaluated in their own living spaces and working conditions.

  8. Effects of altruism and burnout on driving behavior of bus drivers.

    Science.gov (United States)

    Shi, Xia; Zhang, Liang

    2017-05-01

    Personality traits predict driving behaviors. However, the mechanism underlying this relationship has not been adequately investigated in professional drivers. The current study investigated the relationship between altruistic personality and aberrant driving behaviors, and the potential role of burnout. A total of 194 bus drivers completed questionnaires including measures of altruism, burnout and aberrant driving behaviors (aggressive violations, ordinary violations, errors, and lapses). The results showed that altruism was negatively correlated with burnout, and with all the four subcategories of aberrant driving behavior. Burnout fully mediated the relationship between altruism and aggressive violations, and partially mediated the relationship between altruism and lapses. These findings can be applied in the bus drivers' selection and interventions for burnout in order to improve the safety of public transport. Copyright © 2017 Elsevier Ltd. All rights reserved.

  9. Psychomotor conditions of bus drivers subjected to noise and vibration in the working environment

    Directory of Open Access Journals (Sweden)

    Romańska-Zapała Anna

    2017-01-01

    Full Text Available The influence of vibration on human body is an issue that from several decades is a subject of many research and experiments. But most of these research concern on negative influences on human body. The paper presents methodology and results of research conducted on bus drivers of National Urban Transport in Tychy. The study involved fourteen drivers. First stage of the experiment included biomechanical and medical tests. After that psychological tests were made determining such factors like personality characteristics and stress resistance. Second stage included monitoring of psychomotor condition of drivers during night and day shifts, before and after work.

  10. Mental workload and its relation with fatigue among urban bus drivers

    Directory of Open Access Journals (Sweden)

    Narmin Hassanzadeh-Rangi

    2017-06-01

    Full Text Available Introduction: Driving crash is one of major concerns in all countries. Mental workload reflects the level of attention resources required to meet both objec­tive and subjective performance criteria, which may be affected by task demand, external support, and past experience. Mental workload has been commonly cited as a major cause of workplace and transportation accidents. The objective of this study was assessment of mental workload and its relation with fatigue among urban bus drivers in Tehran, Iran. Methods: In this descriptive and analytical study, the NASA-TLX workload scale and the Samn-Perelli fatigue scale were completed by 194 professional bus drivers. Descriptive statistics as well as correlation and regression analysis were performed for data processing. Results: The total mental workload had highest correlation with the physical demand(r=0.73, p<0.001, the mental demand (r=0.68, p<0.001 and the time pressure (r=0.58, p<0.001. The total fatigue perceived by bus driver had highest correlation with the frustration level (r=0.42, p<0.001, the time pressure (r=0.24, p<0.001 and the mental workload (r=0.21, p<0.001. Conclusion: Mental workload, physical workload and time pressure are important determinants of the total mental workload and fatigue perceived by urban bus drivers. A comprehensive intervention program, include work turnover, trip and work-rest scheduling as well as smoking cessation, was recommended to improve mental workload and fatigue. 

  11. Work-related stress and role of personality in a sample of Italian bus drivers.

    Science.gov (United States)

    Bergomi, Margherita; Modenese, Alberto; Ferretti, Enrica; Ferrari, Angela; Licitra, Giuseppe; Vivoli, Roberto; Gobba, Fabriziomaria; Aggazzotti, Gabriella

    2017-01-01

    Several studies have shown that professional drivers are at risk of developing work-related stress. Stress may be responsible for a variety of adverse effects and may also be associated with an increased number of accidents. Perform an integrated, objective and subjective evaluation of work-related stress in bus drivers, that also considered the role of personality traits. Salivary α-amylase and cortisol were measured in 42 bus drivers. Subjective stress evaluation was performed with the Perceived Stress Scale (PSS-10) and Driver Stress Inventory (DSI). To evaluate personality traits, we administered the Eysenck Personality Questionnaire-Revised (EPQ-R) and the Impulsivity Inventory (IVE). Salivary biomarkers showed no associations with PSS-10 and personality traits. Cortisol levels were positively correlated with fatigue (r = 0.44) at the middle of the work-shift and with aggression (r = 0.51) at the end of a day off. At the end of the work-shift, cortisol levels were negatively correlated with hazard monitoring (r = -0.37) and salivary α-amylase was positively correlated with thrill-seeking (r = 0.36). Neuroticism (β= 0.44) and impulsiveness (β= 0.38) were predictors of perceived stress by multiple regression. An integrated method, considering both objective and subjective indicators, seems adequate to evaluate work-related stress in professional drivers. Personality traits are relevant in determining perception of stress.

  12. Split-shift work in relation to stress, health and psychosocial work factors among bus drivers.

    Science.gov (United States)

    Ihlström, Jonas; Kecklund, Göran; Anund, Anna

    2017-01-01

    Shift work has been associated with poor health, sleep and fatigue problems and low satisfaction with working hours. However, one type of shift working, namely split shifts, have received little attention. This study examined stress, health and psychosocial aspects of split-shift schedules among bus drivers in urban transport. A questionnaire was distributed to drivers working more than 70% of full time which 235 drivers in total answered. In general, drivers working split-shift schedules (n = 146) did not differ from drivers not working such shifts (n = 83) as regards any of the outcome variables that were studied. However, when individual perceptions towards split-shift schedules were taken into account, a different picture appeared. Bus drivers who reported problems working split shifts (36%) reported poorer health, higher perceived stress, working hours interfering with social life, lower sleep quality, more persistent fatigue and lower general work satisfaction than those who did not view split shifts as a problem. Moreover, drivers who reported problems with split shifts also perceived lower possibilities to influence working hours, indicating lower work time control. This study indicates that split shifts were not associated with increased stress, poorer health and adverse psychosocial work factors for the entire study sample. However, the results showed that individual differences were important and approximately one third of the drivers reported problems with split shifts, which in turn was associated with stress, poor health and negative psychosocial work conditions. More research is needed to understand the individual and organizational determinants of tolerance to split shifts.

  13. Obstructive sleep apnea among express bus drivers in Malaysia: important indicators for screening.

    Science.gov (United States)

    Yusoff, M Fadhli Mohd; Baki, Marina Mat; Mohamed, Norlen; Mohamed, A Sani; Yunus, M Razif Mohamad; Ami, Mazita; Othman, Ilhamah; Ishak, Azlan I

    2010-12-01

    Obstructive sleep apnea (OSA) has been identified as one of the significant risk factors for motor vehicle crashes (MVCs). In the interest of public safety, this study was conducted to determine the prevalence of OSA and its associated factors among express bus drivers in Malaysia. Identifying factors or conditions related with OSA is very important because they can be used as indicators to subject a person to a confirmatory diagnosis using polysomnography testing. Two hundred eighty-nine randomly selected express bus drivers from 5 express bus companies participated in the study. Information on demography, medical history, clinical symptoms, and signs of OSA were collected by a designated medical officer and the diagnosis of OSA was done based on the Apnea Hypopnoea Index (AHI) from polysomnography testing. Based on AHI, 128 (44.3%) subjects were diagnosed as having OSA with 83 (28.7%), 26 (9.0%), and 26 (6.6%) classified as mild, moderate, and severe OSA, respectively. Multiple logistic regression analysis results showed that age (odds ratio [OR] = 1.05, 95% confidence interval [CI] 1.01-1.09), snoring (OR = 3.54, 95% CI 1.91-6.57), body mass index (BMI; OR = 1.17, 95% CI 1.09-1.25), hypertension (OR = 1.87, 95% CI 1.02-3.40), and neck circumference (OR = 1.31, 95% CI 1.18-1.46) were significantly associated with OSA status. The results supported the need for identifying the risk group for OSA among express bus drivers and the need to diagnose them early for an early intervention.

  14. Crash risk and aberrant driving behaviors among bus drivers: the role of personality and attitudes towards traffic safety.

    Science.gov (United States)

    Mallia, Luca; Lazuras, Lambros; Violani, Cristiano; Lucidi, Fabio

    2015-06-01

    Several studies have shown that personality traits and attitudes toward traffic safety predict aberrant driving behaviors and crash involvement. However, this process has not been adequately investigated in professional drivers, such as bus drivers. The present study used a personality-attitudes model to assess whether personality traits predicted aberrant self-reported driving behaviors (driving violations, lapses, and errors) both directly and indirectly, through the effects of attitudes towards traffic safety in a large sample of bus drivers. Additionally, the relationship between aberrant self-reported driving behaviors and crash risk was also assessed. Three hundred and one bus drivers (mean age=39.1, SD=10.7 years) completed a structured and anonymous questionnaire measuring personality traits, attitudes toward traffic safety, self-reported aberrant driving behaviors (i.e., errors, lapses, and traffic violations), and accident risk in the last 12 months. Structural equation modeling analysis revealed that personality traits were associated to aberrant driving behaviors both directly and indirectly. In particular altruism, excitement seeking, and normlessness directly predicted bus drivers' attitudes toward traffic safety which, in turn, were negatively associated with the three types of self-reported aberrant driving behaviors. Personality traits relevant to emotionality directly predicted bus drivers' aberrant driving behaviors, without any mediation of attitudes. Finally, only self-reported violations were related to bus drivers' accident risk. The present findings suggest that the hypothesized personality-attitudes model accounts for aberrant driving behaviors in bus drivers, and provide the empirical basis for evidence-based road safety interventions in the context of public transport. Copyright © 2015 Elsevier Ltd. All rights reserved.

  15. Sleep patterns and sleep-related complaints of Brazilian interstate bus drivers.

    Science.gov (United States)

    Mello, M T; Santana, M G; Souza, L M; Oliveira, P C; Ventura, M L; Stampi, C; Tufik, S

    2000-01-01

    Sleep-related complaints have become a highlight for physicians as well as public health administrators. Studies of sleep patterns and sleep-related complaints of shift workers have been useful in minimizing reduction in the quality of life due to the warping of the sleep-wake cycle. The objective of the present study was to assess patterns of sleep, sleep-related complaints as well as physical activity and scoring rates for depression and anxiety in interstate bus drivers. Data were obtained with a sleep questionnaire, with the Beck inventory for depression, and the State-Trait Anxiety Inventory (STAI). A total of 400 interstate bus drivers from the northern, southern, central-western and south-eastern regions of Brazil were interviewed. Sixty percent of the subjects interviewed presented at least one sleep-related complaint, 16% admitted to have dozed at the wheel while on duty, and 41% stated that they exercised on a regular basis. Other sleep disturbance complaints reported were: sleep latency 29'17"; physical fatigue, 59.8%; mental fatigue, 45.4%; sleepiness, 25.8%; irritability, 20.6%; insomnia, 37.5%, respiratory disturbances, 19. 25% and snoring, 20.75%. Scores for anxiety and depression were not in the pathological range. The present data reinforce the view that bus drivers are generally discontent with shift work and its effects on sleep. Consequently, it is very important to establish an appropriate work schedule for drivers, besides implementing photo-therapy and physical activities in order to minimize sleepiness when driving.

  16. Sleep patterns and sleep-related complaints of Brazilian interstate bus drivers

    Directory of Open Access Journals (Sweden)

    M.T. Mello

    2000-01-01

    Full Text Available Sleep-related complaints have become a highlight for physicians as well as public health administrators. Studies of sleep patterns and sleep-related complaints of shift workers have been useful in minimizing reduction in the quality of life due to the warping of the sleep-wake cycle. The objective of the present study was to assess patterns of sleep, sleep-related complaints as well as physical activity and scoring rates for depression and anxiety in interstate bus drivers. Data were obtained with a sleep questionnaire, with the Beck inventory for depression, and the State-Trait Anxiety Inventory (STAI. A total of 400 interstate bus drivers from the northern, southern, central-western and south-eastern regions of Brazil were interviewed. Sixty percent of the subjects interviewed presented at least one sleep-related complaint, 16% admitted to have dozed at the wheel while on duty, and 41% stated that they exercised on a regular basis. Other sleep disturbance complaints reported were: sleep latency 29'17"; physical fatigue, 59.8%; mental fatigue, 45.4%; sleepiness, 25.8%; irritability, 20.6%; insomnia, 37.5%, respiratory disturbances, 19.25% and snoring, 20.75%. Scores for anxiety and depression were not in the pathological range. The present data reinforce the view that bus drivers are generally discontent with shift work and its effects on sleep. Consequently, it is very important to establish an appropriate work schedule for drivers, besides implementing photo-therapy and physical activities in order to minimize sleepiness when driving.

  17. Exposure of bus and taxi drivers to urban air pollutants as measured by DNA and protein adducts

    DEFF Research Database (Denmark)

    Hemminki, K.; Zhang, L.F.; Krüger, J.

    1994-01-01

    Urinary 1-hydroxypyrene, lymphocyte DNA adducts, serum protein-bound PAH and hemoglobin-bound alkene adducts were analysed from 4 groups of non-smoking men: urban and suburban bus drivers, taxi drivers and suburban controls. The only differences between the groups were in DNA adducts between...

  18. Driver Performance Problems of Intercity Bus Public Transportation Safety in Indonesia

    Science.gov (United States)

    Suraji, A.; Harnen, S.; Wicaksono, A.; Djakfar, L.

    2017-11-01

    The risk of an inter-city bus public accident can be influenced by various factors such as the driver’s performance. Therefore, knowing the various influential factors related to driver’s performance is very necessary as an effort to realize road traffic safety. This study aims to determine the factors that fall on the accident associated with the driver’s performance and make mathematical modeling factors that affect the accident. Methods of data retrieval were obtained from NTSC secondary data. The data was processed by identifying factors that cause the accident. Furthermore data processing and analysis used the PCA method to obtain mathematical modeling of factors influencing the inter-city bus accidents. The results showed that the main factors that cause accidents are health, discipline, and driver competence.

  19. Beyond a man's world: contributions from considering gender in the study of bus drivers' work activity.

    Science.gov (United States)

    Cunha, Liliana; Nogueira, Sónia; Lacomblez, Marianne

    2014-01-01

    Bus driving is a typically male occupation undergoing a process of feminization. Although men remain a majority, women's integration has raised some questions, namely, related to work organization or its impact on health. This paper focuses on the contributions of assuming a gender perspective in the analysis of the bus driving occupation and the conditions under which it is performed. Twenty female and 158 male bus drivers. Qualitative and quantitative approaches were combined. Ergonomic work analysis and individual interviews were used, as well as INSAT (Work and Health Questionnaire). Difficulties inherent to the work activity were highlighted, in terms of working hours and management of "peripheral tasks", with implications for the balance between professional and personal life. These difficulties were reported differently by men and women, although both made themselves clear about the impact on their career and health. Taking gender into consideration has enabled an enrichment of the questions that guide the analysis of this work activity, and contributed to a new perspective on the work performed by this occupational group as well as a new approach to study the history of the transport industry by proposing as focus of analysis issues related to "gender mobility".

  20. Overweight as hypertension risk prediction in bus drivers - doi: 10.4025/actascihealthsci.v35i2.9084

    Directory of Open Access Journals (Sweden)

    André de Camargo Smolarek

    2013-06-01

    Full Text Available Blood pressure (BP has been currently associated with several risk markers in cardiovascular diseases and excess body weight although there is only slight evidence on the association of Body Mass Index (BMI with BP in bus drivers. Current analysis verified the association of BMI with BP in bus drivers and the risk of individuals with excess weight within the context of high blood pressure. The sample consisted of 75 bus drivers who had their BMI and BP evaluated. Statistical analysis was descriptive and Pearson correlation and odds-ratio were p < 0.05. A significant relationship between BMI and blood pressure, namely, r = 0.438 (p < 0.05 was evident. Individuals with weight excess weight were 4.04 times more likely to have high blood pressure (p < 0.05. Results showed individuals with excess weight were more likely to develop high blood pressure conditions.

  1. Role of drowsy driving in traffic accidents: a questionnaire survey of Thai commercial bus/truck drivers.

    Science.gov (United States)

    Leechawengwongs, Manoon; Leechawengwongs, Evelyn; Sukying, Chakrit; Udomsubpayakul, Umaporn

    2006-11-01

    The authors assessed the relationship between traffic accidents and drowsiness. A self-answered questionnaire survey of 4331 commercial bus/truck drivers was done. Sixty-nine percent of the drivers reported accidents and one third of these accidents was attributable to drowsiness. Drowsy driving and microsleeps were experienced by 75% and 28% of drivers respectively. Forty-five percent of drivers had excessive daytime sleepiness based on the Epworth Sleepiness Scale (ESS score > or =11). This excessive daytime sleepiness was strongly associated with feeling drowsy, microsleeps, and accidents. The major causes of drowsiness were sleep deprivation (90%), medications that caused sleepiness (78%), drinking alcohol the previous night (23%), and chronic loud snoring with or without obesity (17%). 61% of drivers worked longer than 12 hours with no days off The feeling of drowsiness at the wheel was also closely related to long hours of driving (>4 hours). Countermeasures that drivers used to keep them awake were talking to someone, drinking coffee or caffeinated-energy drinks, chewing snacks or gum and pulling over to have a nap. There is a strong relationship between accidents and drowsiness in commercial bus/truck drivers. The main cause of drowsiness was sleep deprivation. The authors hope that this information will help the public authority develop a policy to reduce the traffic accidents attributable to drowsy driving in commercial bus/truck drivers.

  2. Metabolic syndrome among professional bus and truck drivers in Kashan, 2008

    Directory of Open Access Journals (Sweden)

    Hamidreza Saberi

    2009-12-01

    Full Text Available Background: The literature data and our own studies show that in drivers of transport vehicles, work-related risk factors for arterial hypertension, ischemic heart disease, and metabolic syndrome are largely intensified. These involve occupational risk factors as well as classic ones, such as obesity, limited physical activity, shift work, or tobacco smoking. However, studies published over the past two decades on the health of bus and truck drivers have received relatively less attention in developing countries. Methods: In a cross-sectional study 429 Kashan City male bus and truck drivers that enter the occupational health service for health examination were enrolled. The study focused on the presence of the metabolic syndrome, as defined by the National Cholesterol Education Program Expert Panel on Detection, Evaluation and Treatment of High Blood Cholesterol in Adults (NCEP ATP III and statistical tests such as t-test, chi-square test and Pearson’s correlation coefficient were used to analyze the data. Results: The prevalence of metabolic syndrome according to ATP-III was 35.9% mostly at age range 30-39 years. The prevalence of overweight was 41% Obesity, 23.1% hypertension, 42.9% Diabetes, 7% hypertriglyceridemia, 53.4% and low HDL cholesterol, 48.7%. In addition, between diabetes and hypertension and between hypertension and smoking meaningful relation was seen (p=0.006. Conclusion: We observed a high prevalence of metabolic syndrome in these groups to be significantly higher than other groups in Iran. So, Occupation must be considered as a risk factor for impaired health status, leading to temporary or permanent disability to work.

  3. Blood pressure and blood lead concentration in San Francisco MUNI bus drivers

    Energy Technology Data Exchange (ETDEWEB)

    Sharp, D.S.

    1987-01-01

    San Francisco MUNI bus drivers have an increased prevalence of hypertension. This study examined relationships between blood lead concentration (Pb-B) and blood pressure (BP) in 342 drivers. Two groups of subjects were identified. These subjects treated for hypertension (n = 54) and untreated subjects (n = 288). Systolic and diastolic BPs varied from 102-173 mmHg and from 61-105 mm Hg respectively in untreated subjects. They varied from 110-206 mmHg and from 73-127 mmHg respectively in treated subjects. The Pb-B varied from 2-15 {mu}g/dl in untreated subjects, and 2-25 {mu}g/dl in treated drivers. The relationship between BP and the logarithm of Pb-B was examined in each group separately using multiple regression techniques. Covariates included age, body mass index, sex, race, and caffeine intake. The regression coefficient relating systolic BP and In(Pb-B) was 1-2 mmHg/ln({mu}g/Dl) (90% C.I.: {minus}2,5) in untreated subjects. The relationship in treated subjects was too unstable to be accurately determined. The coefficients for diastolic BP were 2.0-2.5 mmHg/ln({mu}g/dl) (90% C.I.: 0.1,4.5) and 6 mmHg/ln({mu}g/dl) (90% C.I.: 2,11) in untreated and treated subjects respectively.

  4. EFFECTS OF NIGHTTIME NAP AND DAYTIME SLEEP ON HEART RATE AND DROWSINESS IN LONG-DISTANCE HIGHWAY BUS DRIVERS

    Directory of Open Access Journals (Sweden)

    Hiroshi IKEDA

    2006-01-01

    Full Text Available The aim of this study was to examine the effects of a nighttime nap and daytime sleep on the heart rates of professional long-distance bus drivers and also a subjective rating of drowsiness through the use of a questionnaire survey on 58 drivers and a heart rate study on 9 drivers during both work and sleep. Of 2 bus drivers, one continued to drive for approximately 2-3 hours while another was alternately able to take a nap during nighttime in the bus cabin for a maximum of around 2 hours during their rest time. In a questionnaire survey, around 80% of 58 drivers reported that they could sleep well for at least one-half of the duration of the nap time reported. The nighttime nap showed a beneficial effect on their sleep debt which results from both night driving as well as from insufficient daytime sleep in local lodgings after duty. Concerning both the nighttime nap and daytime sleep, according to the heart rate measurements of 9 drivers during their duty time, it was found that the average heart rate had higher levels during daytime sleep than during a nighttime nap, presumably due to circadian rhythm. It was disclosed that the duration of a nap in the cabin was very short but the recovery from drowsiness could be effective.

  5. Job strain and prevalence of hypertension in a biracial population of urban bus drivers.

    Science.gov (United States)

    Albright, C L; Winkleby, M A; Ragland, D R; Fisher, J; Syme, S L

    1992-07-01

    In this study we tested the association between occupational stress--as measured by job demands, decision latitude, and job strain--and hypertension in a population of 1396 Black and White bus drivers. Height, weight, blood pressure, and medical history were assessed by physical exam. Drivers completed a questionnaire assessing their work schedules, personal habits, and self-perceptions about job demands and decision latitude. Univariate analyses revealed significant inverse associations; lower levels of job demands and job strain were associated with a higher prevalence of hypertension for Blacks and Whites. After 12 confounding variables were controlled for, the association between these two measures of occupational stress and hypertension became nonsignificant. Decision latitude was also not significantly associated with hypertension. Our findings are inconsistent with previous studies' findings of a positive association between job strain and chronic diseases. The difference in results may be explained by our incorporation of individuals' perceptions in the measurement of occupational stressors and our use of individuals from a single occupation with comparable job responsibilities and income, thus controlling for potential confounding by social class.

  6. Comparative cross-sectional study for understanding the burden of low back pain among public bus transport drivers.

    Science.gov (United States)

    Jadhav, Abhijeet V

    2016-01-01

    Even though low back pain (LBP) is common, some occupations pose a higher risk. Identifying these occupations and specific factors will help to reduce the suffering and burden. This study aims to compare the prevalence of chronic LBP among bus drivers and to find its association with some occupational factors. It is a cross-sectional study to compare prevalence of LBP and factors associated with it, in two groups of drivers (n = 178) and nondrivers (n = 184). The 10 years' percentage prevalence of LBP was found to be 70.8 and 51.6 among drivers and nondrivers respectively, whereas point prevalence in the same was 64.0 and 44.6. Drivers are at a higher risk for LBP with Odds ratio-2.270 (1.471-3.502). Risk factors such as prolonged sitting in one posture, night shifts, job dissatisfaction, tobacco use, and lack of exercise were significantly higher among drivers. Though the prevalence and intensity of LBP was higher among drivers, their number of leaves and hospital admitted days were less among drivers. This is a potential group for intervention as prevalence of LBP, neck pain, and most of the suspected risk factors were higher among the drivers. Drivers got less recovery time and had higher sequelae.

  7. Fertility rates among lead workers and professional bus drivers: a comparative study.

    Science.gov (United States)

    Lin, S; Hwang, S A; Marshall, E G; Stone, R; Chen, J

    1996-05-01

    We examined the relationship between lead exposure and fertility among men in a retrospective cohort study. Fertility (1981-1992) of lead-exposed workers was determined from birth certificate information and was compared with that of nonexposed workers. The exposed group consisted of 4256 reproductive-age male workers reported to the New York State Heavy Metals Registry. The comparison group consisted of a random sample of male bus drivers licensed in the state of New York; these men were frequency-matched by age and residence to the men who were exposed to lead. The actual number of births among lead workers was lower than the expected number of births for that group (standardized fertility ratio [SFR] = 0.88; 95% confidence interval [CI] = 0.81-0.95), especially among those who had elevated blood lead levels for longer than 5 years (SFR = 0.43; 95% confidence interval [CI]: = 0.31, 0.59). Even after adjusting for age, race, education, and residence, workers with > 5 years of exposure had reduced likelihood of fathering a child than those with a shorter period of exposure (relative risk, 0.38; 95% CI: 0.23, 0.61). Our study indicates that men with a long duration of lead exposure might have reduced fertility.

  8. Urinary 1-hydroxypyrene and mutagenicity in bus drivers and mail carriers exposed to urban air pollution in Denmark

    DEFF Research Database (Denmark)

    Hansen, Åse Marie; Wallin, Håkan; Binderup, Mona Lise

    2004-01-01

    concentrations and mutagenic activity in urine as biomarkers of exposure in non-smoking bus drivers in city and rural areas on a work day and a day off and in non-smoking mail carriers working outdoors (in the streets) and indoors (in the office). METHODS: Twenty-four hour urine samples were collected...... on a working day and a day off from 60 non-smoking bus drivers in city and rural areas and from 88 non-smoking mail carriers working outdoors (in the streets) and indoors (in the office). The concentration of 1-hydroxypyrene was measured by means of HPLC and the mutagenic activity was assessed by the Ames...... NAT2 phenotype, cooking at home, exposure to vehicle exhaust, and performing physical exercise after work were included. The NAT2 slow acetylators had 29% (1.29 [CI: 1.15-1.98]) higher 1-hydroxypyrene concentrations in urine than the fast acetylators. Male bus drivers had 0.92 revertants...

  9. The effect of biological rhythms and personality traits on the incidence of unsafe behaviors among bus drivers in Shiraz, Iran.

    Science.gov (United States)

    Kamari Ghanavati, Fatemeh; Jahangiri, Mehdi; Khalifeh, Maryam; Keshavarzi, Sareh; Shakerian, Mahnaz

    2017-11-01

    Unsafe behaviors are main causes of accidents mostly influenced by personal characteristics, social environment and also individual biorhythm cycles. This study was carried out to find out whether personality traits and biorhythm could affect the incidence of unsafe behaviors among city bus drivers. This cross-sectional study was conducted on 224 bus drivers in Shiraz, Iran, 2014. The data were collected using NEO personality traits questionnaire. Also, a self-constructed checklist was used to investigate the drivers' unsafe behaviors. Information on drivers' biorhythm was analyzed by Natural Biorhythm software version 3.2. The relationship between demographic characteristics, personality traits and biorhythm were examined by T-Test, One-way ANOVA, correlation coefficient and Chi square tests. Multiple linear regression analysis was used to investigate the factors influencing the incidence of unsafe behaviors. 28.6% of participants have experienced critical days in their biorhythm cycles. Also the mean percentage of unsafe behavior was 54.08 ± 11.91 among the subjects of the study.Significantly negative correlations were observed between each personality factor and the percentage of unsafe behaviors. Also, there was a significant relationship between percentage of derivers' unsafe behaviors and the general cycle of biorhythm (having at least one critical day in each of the cycles). Taking the measures including selection of low-risk traffic routes in the critical days and considering the personality traits at the time of employment could be effective in reducing the unsafe behaviors and accidents.

  10. Correlation of Occupational Stress Index with 24-hour Urine Cortisol and Serum DHEA Sulfate among City Bus Drivers: A Cross-sectional Study

    Directory of Open Access Journals (Sweden)

    Chung-Li Du

    2011-06-01

    Conclusion: Measurements of biomarkers may offer additional stress evaluations with OSI questionnaires for bus drivers. Increased DHEA-S and cortisol levels may result from stressors like income security. Prevention efforts towards occupational stress and life events and health promotional efforts for aged driver were important anti-stress remedies.

  11. Testing the effects of safety climate and disruptive children behavior on school bus drivers performance: A multilevel model.

    Science.gov (United States)

    Zohar, Dov; Lee, Jin

    2016-10-01

    The study was designed to test a multilevel path model whose variables exert opposing effects on school bus drivers' performance. Whereas departmental safety climate was expected to improve driving safety, the opposite was true for in-vehicle disruptive children behavior. The driving safety path in this model consists of increasing risk-taking practices starting with safety shortcuts leading to rule violations and to near-miss events. The study used a sample of 474 school bus drivers in rural areas, driving children to school and school-related activities. Newly developed scales for measuring predictor, mediator and outcome variables were validated with video data taken from inner and outer cameras, which were installed in 29 buses. Results partially supported the model by indicating that group-level safety climate and individual-level children distraction exerted opposite effects on the driving safety path. Furthermore, as hypothesized, children disruption moderated the strength of the safety rule violation-near miss relationship, resulting in greater strength under high disruptiveness. At the same time, the hypothesized interaction between the two predictor variables was not supported. Theoretical and practical implications for studying safety climate in general and distracted driving in particular for professional drivers are discussed. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. Increased urinary excretion of 8-oxo-2'-deoxyguanosine, a biomarker of oxidative DNA damage, in urban bus drivers

    DEFF Research Database (Denmark)

    Loft, S; Poulsen, H E; Vistisen, K

    1999-01-01

    pollution. Similarly, DNA repair may be influenced by occupational and other exposures as well as modify the effect of DNA damaging agents. As part of a large investigation of the genotoxic burden to diesel exposed workers in transport sectors we studied oxidative DNA damage in 57 non-smoking bus drivers......'-deoxyguanosine (8-oxodG), a repair product of the highly mutagenic oxidation of guanine in DNA or the cellular pool of GTP. CYP1A2 activity was estimated from the urinary excretion of metabolites of dietary caffeine. The DNA repair was estimated by unscheduled DNA synthesis (UDS) in mononuclear cells isolated...

  13. Le temps des conductrices de bus The time of female bus drivers. For some thinking space between professional and personal activities

    Directory of Open Access Journals (Sweden)

    Livia Scheller

    2009-11-01

    Full Text Available Nous présentons une réflexion sur les liens entre temps de travail et temps de l’espace privé, issue d’une étude faite avec des conductrices de bus.  Pour elles, comme pour la plupart des femmes, le temps de travail et le temps dit « hors travail » sont difficilement dissociables. Si la séparation entre sphères d’activité est, pour les hommes et pour les femmes, une dimension psychiquement recherchée, chez les femmes elle n’implique pas des clivages constitutifs. Elles savent bien que l’activité de travail offre des occasions de développement d’une autre origine que celles déployées dans d’autres espaces de vie. Mais à la différence des hommes, elles n’ont pas fait de cette séparation un repère identitaire. Nous avançons que la capacité de différencier, d’une part, ces genres d’activité, et, d’autre part, la possibilité de les investir « normativement », peut être une source de santé. Comment ? En créant les modes de séparation nécessaires à cette différenciation, sans pour autant perdre la perméabilité entre les deux espaces. Il s’agit de penser une position qui, bien qu’apparemment contradictoire, ne l’est pas. On pourra en trouver une illustration dans l’expérience des conductrices de bus.Taking off from a study we carried out with woman bus drivers, we analyze how working time and private time relate to each other. For them, as for most women, time at work and time off work cannot be completely separated. While psychologically the separation between different spheres of activity is something to which both men and women aspire, women do not actually demand it. They seem to know that the possibilities afforded by work are of a different nature than those of other sorts of activity. However, unlike men, women have not made that distinction a point of reference in their self-identity. We argue that the ability to distinguish the types of activity on the one hand, and on the

  14. Stress-related psychosocial factors at work, fatigue, and risky driving behavior in bus rapid transport (BRT) drivers.

    Science.gov (United States)

    Useche, Sergio A; Ortiz, Viviola Gómez; Cendales, Boris E

    2017-07-01

    There is consistent scientific evidence that professional drivers constitute an occupational group that is highly exposed to work related stressors. Furthermore, several recent studies associate work stress and fatigue with unsafe and counterproductive work behaviors. This study examines the association between stress-related work conditions of Bus Rapid Transport (BRT) drivers and risky driving behaviors; and examines whether fatigue is a mechanism that mediates the association between the two. A sample of 524 male Bus Rapid Transit (BRT) operators were drawn from four transport companies in Bogotá, Colombia. The participants answered a survey which included an adapted version of the Driver Behavior Questionnaire (DBQ) for BRT operators, as well as the Effort-Reward Imbalance and Job Content Questionnaires, the Subjective Fatigue subscale of the Checklist Individual Strength (CIS) and the Need for Recovery after Work Scale (NFR). Utilizing Structural Equation Models (SEM) it was found that risky driving behaviors in BRT operators could be predicted through job strain, effort-reward imbalance and social support at work. It was also found that fatigue and need for recovery fully mediate the associations between job strain and risky driving, and between social support and risky driving, but not the association between effort/reward imbalance (ERI) and risky driving. The results of this study suggest that a) stress related working conditions (Job Strain, Social Support and ERI) are relevant predictors of risky driving in BRT operators, and b) that fatigue is the mechanism which links another kind of stress related to working conditions (job strain and low social support) with risky driving. The mechanism by which ERI increases risky driving in BRT operators remains unexplained. This research suggests that in addition to the individual centered stress-reduction occupational programs, fatigue management interventions aimed to changing some working conditions may reduce

  15. Whole-body Vibration Exposure Intervention among Professional Bus and Truck Drivers: A Laboratory Evaluation of Seat-suspension Designs.

    Science.gov (United States)

    Blood, Ryan P; Yost, Michael G; Camp, Janice E; Ching, Randal P

    2015-01-01

    Long-term exposure to seated whole-body vibration (WBV) is one of the leading risk factors for the development of low back disorders. Professional bus and truck drivers are regularly exposed to continuous WBV, since they spend the majority of their working hours driving heavy vehicles. This study measured WBV exposures among professional bus and truck drivers and evaluated the effects of seat-suspension designs using simulated field-collected data on a vibration table. WBV exposures were measured and compared across three different seat designs: an air-ride bus seat, an air-ride truck seat, and an electromagnetically active (EM-active) seat. Air-ride seats use a compressed-air bladder to attenuate vibrations, and they have been in operation throughout the transportation industry for many years. The EM-active seat is a relatively new design that incorporates a microprocessor-controlled actuator to dampen vibration. The vibration table simulated seven WBV exposure scenarios: four segments of vertical vibration and three scenarios that used field-collected driving data on different road surfaces-a city street, a freeway, and a section of rough roadway. The field scenarios used tri-axial WBV data that had been collected at the seat pan and at the driver's sternum, in accordance with ISO 2631-1 and 2631-5. This study found that WBV was significantly greater in the vertical direction (z-axis) than in the lateral directions (x-and y-axes) for each of the three road types and each of the three types of seats. Quantitative comparisons of the results showed that the floor-to-seat-pan transmissibility was significantly lower for the EM-active seat than for either the air-ride bus seat or the air-ride truck seat, across all three road types. This study also demonstrated that seat-suspension designs have a significant effect on the vibrations transmitted to vehicle operators, and the study's results may prove useful in designing future seat suspensions.

  16. A STUDY ON HYPERTENSION AND IT’S DETERMINANTS AMONG MALE BUS DRIVERS IN STATE ROAD TRANSPORT CORPORATION, VISAKHAPATNAM, ANDHRA PRADESH

    Directory of Open Access Journals (Sweden)

    Bhaskara Rao

    2015-10-01

    Full Text Available INTRODUCTION: Hypertension is an iceberg disease and it remains silent, being generally asymptomatic most of its course. It is one of the major risk factors for cardiovascular mortality, which accounts for 20 - 50% of all deaths. The nature of profession puts bus drivers at higher risk of developing hypertension. Due to lack of information regarding the prevalence of hypertension and its determinants among the RTC bus drivers in Visakhapatnam, the present study is carried out. OBJECTIVE : To measure occurrence of certain ri sk factors for hypertension among bus drivers and to study the proportion of bus drivers having hypertension METHODOLOGY: A cross sectional descriptive study was conducted among bus drivers working in APSRTC Visakhapatnam city during months of Dec . 2014 – Jan . 2 015. One of the six bus depots was randomly selected, a prior permission from the depot manager was taken and convenient sample of 100 bus drivers considered for study. Data was collected using a pre tested semi structured questionnaire to the study subject s after obtaining informed consent. All the individuals who are willing to participate were included and those not willing to participate and who were60years of age were excluded from the study. Data was analyzed by using Microsoft excel, sta tistical tests were applied where ever necessary and p value of <0.05 was considered as statistical significant. Study materials include mercury sphygmomanometer, stethoscope, measuring tape, weighing machine. RESULTS: The mean age of study population was 42.9years, majority (90% of them belongs to class II and III according to modified B. G. Prasad’s classification, prevalence of hypertension among study population was (36%, of whom 44.4% of participants were not aware of their hypertensive status. Famil y history of hypertension observed in 46% of the study population. About 59% of the study population were overweight & obese, of them 45.7% had hypertension

  17. Self-assessed job satisfaction and ischaemic heart disease mortality: a 10-year follow-up of urban bus drivers

    DEFF Research Database (Denmark)

    Netterstrøm, B; Suadicani, P

    1993-01-01

    reported job strain and job dissatisfaction would have an excess risk of subsequent death due to IHD. Of 2465 bus drivers, 2045 (83%) responded to a questionnaire distributed in 1978 on psychosocial well-being and work conditions. The men had their mortality recorded during the years 1978-1988. Information...... working in a high traffic intensity area, RR = 1.6. In contrast to what was expected, men who reported a high degree of job satisfaction had increased risk of IHD. Those who did not look for another job had a highly significant sixfold increased risk of future death from IHD. Also those who reported never...... experiencing mental exhaustion after work, that their job was very varied, that their job was something special, and those who reported that they would choose the same job again, had an excess risk. Death due to other causes was positively associated with marital status only. We suggest that inconsistencies...

  18. [Fatigue and sleepiness in interprovincial road bus drivers: comparative study between formality and informality].

    Science.gov (United States)

    Liendo, Gustavo R; Castro, Carla L; Rey de Castro, Jorge

    2010-06-01

    To compare the levels of fatigue, sleepiness and their consequences between formal and informal drivers of interprovincial buses. To evaluate labor conditions between both study groups. A comparative cross-sectional study was performed with non-probabilistic sampling. 100 companies of land transport were included, out of which 17 were formal according to the official registries of the Ministry of Transport and Communications (MTC), the drivers were also classified as formal or informal. The survey included one questionnaire and a Peruvian validated version of the Epworth sleepiness scale. 71 formal drivers and 274 informal drivers participated, all were males. Out of the 134 drivers that worked for the formal companies according to the MTC, only 43 (32%) belong to the formal group based on the proposed criteria. 48% (34) of the formal drivers and 43% (118) of the informal sleep less than 7 hours a day. 48% (34) of the formal and 49% (135) of the informal admitted having had an accident or "almost" having had it, the most frequent time of the day was between 01.00 and 04.00 in the morning. The dawn is the period in which both groups feel most tired. 44% (30) of the formal drivers and 54% (144) of the informal ones perform 5 or more night shifts per week. Out of the total of interviewed, 16% (56) had sleepiness. The association with road traffic accidents was similar. The fatigue and sleepiness levels were similar between formal and informal drivers. Companies classified as formal, have a high percentage of informality amongst their drivers.

  19. Role of tobacco warning labels in informing smokers about risks of smoking among bus drivers in Mangalore, India.

    Science.gov (United States)

    Mallikarjun, Sajjanshetty; Rao, Ashwini; Rajesh, Gururaghavendran; Shenoy, Ramya; Bh, Mithun Pai

    2014-01-01

    Smoking tobacco is considered as a leading cause of preventable death, mostly in developing countries like India. One of the primary goals of international tobacco control is to educate smokers about the risks associated with tobacco consumption. Tobacco warning labels (TWLs) on cigarette packages are one of the most common statutory means to communicate health risks of smoking to smokers, with the hope that once educated, they will be more likely to quit the habit. The present survey was conducted to assess the effectiveness of TWLs in communicating health risks of tobacco usage among 263 adult smokers working as bus drivers in Karnataka State Road Transport Corporation (KSRTC), Mangalore, India. Information was collected on demographic details, exposure and response to health warnings on tobacco products, intention to quit and nicotine dependency. The majority (79.5%) of the respondents revealed negative intentions towards quitting smoking. Nearly half of the participants had a 'low' nicotine dependency (47.5%) and 98.1% of the respondents had often noticed warning labels on tobacco packages. These health warnings made 71.5% of the respondents think about quitting smoking. Respondents who noticed advertisement or pictures about dangers of smoking had better knowledge, with respect to lung cancer and impotence as a consequence of tobacco. A higher exposure to warning labels was significantly associated with lower nicotine dependency levels of smokers among the present study population. A significantly higher number of respondents who noticed advertisement or pictures about the dangers of smoking thought about the risks of smoking and were more inclined to think about quitting smoking. As exposure increased, an increase in the knowledge and response of participants was also observed. Exposure to tobacco warning labels helps to educate smokers about health risks of tobacco smoking. It may be possible to promote oral health among bus drivers by developing strategies

  20. Study of unsafe behaviors among city bus drivers in Hamadan, 2011

    Directory of Open Access Journals (Sweden)

    2012-01-01

    Conclusion: Because of high percent of unsafe acts and considering importance of its consequences in drivers, reducing unsafe acts trough investment and utilization of behavioral safety principles is required. In this regard, holding educational careers are suggested to increasing driver’s awareness.

  1. Impact of work-related and psychosocial factors on the development of ischemic heart disease among urban bus drivers in Denmark

    DEFF Research Database (Denmark)

    Netterstrøm, Bo; Juel, K

    1988-01-01

    regression model for independent variables regarding psychosocial well-being and work conditions. High work load (driving in heavy traffic) was significantly associated with the occurrence of MI. Of the psychosocial factors "no social contact with colleagues" and "increased work pace" were also significantly......From 1978 to 1985, 2,465 male bus drivers in the three major cities in Denmark were followed with regard to hospital admission due to myocardial infarction (MI) and death due to ischemic heart disease (IHD). In all 2,045 (83%) of these men responded in 1978 to a questionnaire on psychosocial well-being...... and work conditions. The respondents did not differ from the nonrespondents regarding hospital admissions and death in the follow-up period (1978-1984). Sixty-two cases of MI were registered among the 2,045 bus drivers in 1978-1984. On this basis relative risk for MI was calculated with a multiple...

  2. Bus crash severity in the United-States: The role of driver behavior, service type, road factors and environmental conditions

    DEFF Research Database (Denmark)

    Kaplan, Sigal; Prato, Carlo Giacomo

    Recent years have witnessed a growing interest in improving bus safety operations worldwide. While in the United States buses are considered relatively safe, the number of bus accidents is far from being negligible, triggering the introduction of the Motor-coach Enhanced Safety Act of 2011.The...

  3. distance bus drivers

    African Journals Online (AJOL)

    Kathryn van Boom

    Work-related musculoskeletal disorders. (WRMSDs) is defined as poor optimisation and functioning of multiple joints, muscles, tendons, nerves and bones due to the work environment.[1] WRMSDs are induced by postural defects, repetitive tasks, environmental factors, and prolonged stresses and strains experienced in ...

  4. Thinking about gender, thinking about a common space of observation and discussion of the work activity of the other: the case of bus drivers.

    Science.gov (United States)

    Cunha, Liliana; Nogueira, Sónia; Lacomblez, Marianne

    2012-01-01

    The work activity of urban bus drivers is held in the public space and characterized by a constant vigilance, but the moments of observation the colleagues' work are scarce. This fact results in a paradox--it is a work activity that is more visible to "outsiders" than to "insiders"--which has an important impact on the debate of the work activity from a perspective of gender and the women's work in a predominantly male context. Ergonomic analysis of work and semi-structured interviews were conducted with 32 urban public transport drivers, 16 women and 16 men. The results reveal the lack of conditions for the drivers' knowledge of the activity of another, especially when that other is a woman--while men attribute characteristics to women based on gender stereotypes and an extension of their role in the private sphere, women relate them with the need to prove their competence and be recognized. It is proposed the development, in the context of training, of a space for debate and knowledge of the activity of the other and for the creation of conditions for another integration of women in the profession and for another visibility of their work.

  5. Adult Competency Education Kit. Basic Skills in Speaking, Math, and Reading for Employment. Part R. ACE Competency Based Job Descriptions: #95--Bus Driver; #98--General Loader; #99--Forklift Operator; #100--Material Handler.

    Science.gov (United States)

    San Mateo County Office of Education, Redwood City, CA. Career Preparation Centers.

    This fifteenth of fifteen sets of Adult Competency Education (ACE) Competency Based Job Descriptions in the ACE kit contains job descriptions for Bus Driver, General Loader, Forklift Operator, and Material Handler. Each begins with a fact sheet that includes this information: occupational title, D.O.T. code, ACE number, career ladder, D.O.T.…

  6. Cansancio y somnolencia en conductores de ómnibus y accidentes de carretera en el Perú: estudio cuantitativo Tiredness and sleepiness in bus drivers and road accidents in Peru: a quantitative study

    Directory of Open Access Journals (Sweden)

    Jorge Rey de Castro

    2004-07-01

    Full Text Available OBJETIVO: Evaluar la relación del cansancio y la somnolencia en los conductores de ómnibus con los accidentes de carretera. La información obtenida de diversos países atribuye a la somnolencia del conductor una parte importante en la génesis de los accidentes de carretera. No obstante, la información al respecto es escasa en el caso del Perú. MÉTODOS: Se realizó un estudio transversal, de índole observacional y comparativa, basado en una encuesta prevalidada y de aplicación supervisada, entre 238 conductores de ómnibus que circulan por la carretera Panamericana Norte del Perú. Para determinar la relación entre variables se emplearon la prueba de ji al cuadrado y el índice de Pearson, con un valor de significación de P OBJECTIVE: To evaluate the relationship that tiredness and sleepiness in bus drivers have to road accidents in Peru. Information from various countries indicates that driver sleepiness plays an important role in road accidents. However, there is only limited information on this subject in Peru. METHODS: Using a supervised, pretested survey, a cross-sectional observational and comparative study was carried out with 238 bus drivers who drive on the Northern Pan American Highway of Peru. To determine the relationship between variables the chi-square test was used, along with the Pearson correlation coefficient. The level of significance was set at P < 0.05. The variables analyzed were: tiredness, sleepiness, hours of driving per day, daily hours of sleep, body mass index, snoring, sleep apnea, and either having had or almost having had an accident while driving. RESULTS: Of the 238 drivers, all of them were men, 45% said they had had or nearly had had an accident while driving, 55% slept less than 6 hours per day, 31% had slept less than 6 hours in the 24 hours before answering the survey, and 80% were in the habit of driving more than 5 hours without stopping. Of the drivers, 56% of them reported being tired at least

  7. Description of a MIL-STD-1553B Data Bus Ada Driver for the LeRC EPS Testbed

    Science.gov (United States)

    Mackin, Michael A.

    1995-01-01

    This document describes the software designed to provide communication between control computers in the NASA Lewis Research Center Electrical Power System Testbed using MIL-STD-1553B. The software drivers are coded in the Ada programming language and were developed on a MSDOS-based computer workstation. The Electrical Power System (EPS) Testbed is a reduced-scale prototype space station electrical power system. The power system manages and distributes electrical power from the sources (batteries or photovoltaic arrays) to the end-user loads. The electrical system primary operates at 120 volts DC, and the secondary system operates at 28 volts DC. The devices which direct the flow of electrical power are controlled by a network of six control computers. Data and control messages are passed between the computers using the MIL-STD-1553B network. One of the computers, the Power Management Controller (PMC), controls the primary power distribution and another, the Load Management Controller (LMC), controls the secondary power distribution. Each of these computers communicates with two other computers which act as subsidiary controllers. These subsidiary controllers are, in turn, connected to the devices which directly control the flow of electrical power.

  8. Lifestyle counseling to reduce body weight and cardiometabolic risk factors among truck and bus drivers--a randomized controlled trial.

    Science.gov (United States)

    Puhkala, Jatta; Kukkonen-Harjula, Katriina; Mansikkamäki, Kirsi; Aittasalo, Minna; Hublin, Christer; Kärmeniemi, Paula; Olkkonen, Seppo; Partinen, Markku; Sallinen, Mikael; Tokola, Kari; Fogelholm, Mikael

    2015-01-01

    We conducted a randomized trial among overweight long-distance drivers to study the effects of structured lifestyle counseling on body weight and cardiometabolic risk factors. Men with waist circumference >100 cm were randomized into a lifestyle counseling (LIFE, N=55) and a reference (REF, N=58) group. The LIFE group participated in monthly counseling on nutrition, physical activity, and sleep for 12 months aiming at 10% weight loss. After 12 months, the REF group participated in 3-month counseling. Assessments took place at 0, 12, and 24 months. Between-group differences in changes were analyzed by generalized linear modeling. Metabolic risk (Z score) was calculated from components of metabolic syndrome. The mean body weight change after 12 months was -3.4 kg in LIFE (N=47) and 0.7 kg in REF (N=48) [net difference -4.0 kg, 95% confidence interval (95% CI) -1.9- -6.2]. Six men in LIFE reduced body weight by ≥10%. Changes in waist circumference were -4.7 cm in LIFE and -0.1 cm in REF (net -4.7 cm, 95% CI -6.6- -2.7). Metabolic risk decreased more in the LIFE than REF group (net -1.2 points, 95% CI -0.6- -2.0). After 24 months follow-up, there were no between-group differences in changes in body weight (net -0.5 kg, 95% CI -3.8-2.9) or metabolic risk score (net 0.1 points; 95% CI -0.8-1.0) compared to baseline. Weight reduction and decreases in cardiometabolic risk factors were clinically meaningful after 12 months of counseling.

  9. Bus accident severity and passenger injury: evidence from Denmark

    DEFF Research Database (Denmark)

    Prato, Carlo Giacomo; Kaplan, Sigal

    2014-01-01

    examining occurrence of injury to bus passengers. Results Bus accident severity is positively related to (i) the involvement of vulnerable road users, (ii) high speed limits, (iii) night hours, (iv) elderly drivers of the third party involved, and (v) bus drivers and other drivers crossing in yellow or red...... light. Occurrence of injury to bus passengers is positively related to (i) the involvement of heavy vehicles, (ii) crossing intersections in yellow or red light, (iii) open areas, (iv) high speed limits, and (v) slippery road surface. Conclusions The findings of the current study provide a comprehensive......Purpose Bus safety is a concern not only in developing countries, but also in the U.S. and Europe. In Denmark, disentangling risk factors that are positively or negatively related to bus accident severity and injury occurrence to bus passengers can contribute to promote safety as an essential...

  10. Road safety issues for bus transport management.

    Science.gov (United States)

    Cafiso, Salvatore; Di Graziano, Alessandro; Pappalardo, Giuseppina

    2013-11-01

    Because of the low percentage of crashes involving buses and the assumption that public transport improves road safety by reducing vehicular traffic, public interest in bus safety is not as great as that in the safety of other types of vehicles. It is possible that less attention is paid to the significance of crashes involving buses because the safety level of bus systems is considered to be adequate. The purpose of this study was to evaluate the knowledge and perceptions of bus managers with respect to safety issues and the potential effectiveness of various technologies in achieving higher safety standards. Bus managers were asked to give their opinions on safety issues related to drivers (training, skills, performance evaluation and behaviour), vehicles (maintenance and advanced devices) and roads (road and traffic safety issues) in response to a research survey. Kendall's algorithm was used to evaluate the level of concordance. The results showed that the majority of the proposed items were considered to have great potential for improving bus safety. The data indicated that in the experience of the participants, passenger unloading and pedestrians crossing near bus stops are the most dangerous actions with respect to vulnerable users. The final results of the investigation showed that start inhibition, automatic door opening, and the materials and internal architecture of buses were considered the items most strongly related to bus passenger safety. Brake assistance and vehicle monitoring systems were also considered to be very effective. With the exception of driver assistance systems for passenger and pedestrian safety, the perceptions of the importance of other driver assistance systems for vehicle monitoring and bus safety were not unanimous among the bus company managers who participated in this survey. The study results showed that the introduction of new technologies is perceived as an important factor in improving bus safety, but a better understanding

  11. Brainstem evoked response in bus drivers with noise-induced hearing loss Audiometria de tronco encefálico em motoristas de ônibus com perda auditiva induzida pelo ruído

    Directory of Open Access Journals (Sweden)

    Adriana Silveira Santos

    2009-10-01

    Full Text Available Studies carried out by Brainstem Evoked Auditory Potentials (BEAP in Noise-Induced Hearing Loss (NIHL workers show different results in relation to neuronal involvement, not involving bus drivers as study object. AIM: to use BEAP in a prospective case/control clinical study to check whether or not there is neural auditory pathway involvement in bus drivers with NIHL. MATERIALS AND METHODS: we selected 50 bus drivers between 27 and 40 years with mild to moderate NIHL, and 20 individuals between 29 and 40 years with normal hearing and without prior history of noise exposure. BEAP tests were carried out and the traces were analyzed. RESULTS: in the NIHL group, the auditory thresholds in 3, 4 and 6 kHz were significantly higher in the left ear. In the NIHL group, potentials PI, PIII and/or PV were not present in a small number of the individuals; we observed a statistically significant increase in PI, PIII and PV absolute latencies, (LIP LIP I-III interpeak latencies, bilaterally and LIP I-V in the left ear. CONCLUSION: in the NIHL group, besides sensorial injury, changes in BEAP latencies suggest an early functional injury of the first auditory pathway afferent neuron.Estudos realizados com os Potenciais Auditivos Evocados de Tronco Encefálico (PEATE em trabalhadores com Perda Auditiva Induzida pelo Ruído (PAIR apresentam resultados díspares em relação ao comprometimento neuronal, além de não contemplar motoristas de ônibus como objeto de estudo. OBJETIVO: Avaliar pelo PEATE, em estudo clínico de série caso/controle, prospectivo, se há comprometimento das vias auditivas neurais em motoristas de ônibus com PAIR. MATERIAL E MÉTODO: Foram selecionados 50 motoristas de ônibus entre 27 e 40 anos portadores de PAIR leve a moderada; e 20 sujeitos entre 29 e 40 anos com audibilidade normal e sem antecedentes de exposição a ruído. Os PEATEs foram realizados e os traçados analisados. RESULTADOS: No grupo PAIR, os limiares auditivos em 3, 4

  12. Perda auditiva induzida por ruído e hipertensão em condutores de ônibus Noise-induced hearing loss and high blood pressure among city bus drivers

    Directory of Open Access Journals (Sweden)

    Heleno Rodrigues Corrêa Filho

    2002-12-01

    Full Text Available OBJETIVO: Estimar as prevalências de perda auditiva induzida por ruído e hipertensão arterial em condutores de ônibus urbanos. MÉTODOS: Executou-se estudo transversal em amostra probabilística de 108 motoristas da cidade de Campinas, SP. Aplicou-se questionário sobre história profissional, jornadas de trabalho e repouso, e realizou-se exame físico e laboratorial incluindo medida da pressão arterial, audiometria tonal limiar, logoaudiometria e dados antropométricos, após a obtenção de consentimento. RESULTADOS: A prevalência de perda auditiva induzida por ruído foi de 32,7% do total examinado. Segundo a classificação de Merluzzi, nos 31 casos classificados em primeiro e segundo graus, observou-se que a freqüência audiométrica com perda auditiva mais acentuada foi a de 6 kHz (61,3%, seguida pela de 4 kHz (38,7%, sem diferenças significantes quanto à lateralidade. A prevalência de hipertensão arterial diastólica (PAD³90 mmHG; PAS³140 mmHG foi de 13,2% dos examinados. CONCLUSÕES: O risco de disacusia induzida por ruído foi maior para os motoristas com mais de seis anos de trabalho, após ajuste para a perda relacionada com a idade, com um odds ratio de 19,25 (1,59OBJECTIVE: To estimate the prevalence of occupational noise-induced hearing loss and arterial hypertension among city bus drivers. METHODS: A cross-sectional study was carried out on a probability random sample of 108 city bus drivers taken out of a total of 1,529 estimated professionals in the city of Campinas, Brazil, in 1991. Drivers were interviewed using questionnaires on job history, shift work and vacation schedules and underwent clinical and laboratory examinations including measures of blood pressure, pure-tone audiometry, speech audiometry, and anthropometric data analysis after an informed consent was obtained. RESULTS: The prevalence of noise-induced hearing loss was 32.7%. According to Merluzzi's classification, 91.2% (31 cases were classified as

  13. Recommendations for yield-to-bus traffic control devices and bus pullout bays design characteristics : [research summary].

    Science.gov (United States)

    2013-04-01

    Bus pullout bays are being installed increasingly : on Floridas roads as a safety factor and so that : stopped buses do not impede traffic. In Florida, : state law requires car drivers to yield to buses : when a bus needs to reenter the roadway af...

  14. Cansancio y somnolencia durante el desempeño laboral de los conductores interprovinciales: experiencia peruana y planteamiento de propuestas Tiredness and sleepiness in rural bus drivers during their job performance: Peruvian experience and proposals

    Directory of Open Access Journals (Sweden)

    Jorge Rey de Castro

    2010-06-01

    Full Text Available La información indica que los accidentes de tránsito causados por somnolencia o cansancio de los conductores de ómnibus son frecuentes en nuestro país. Un conductor que se duerme durante la conducción no puede realizar maniobras evasivas para evitar colisiones o despistes, siendo el resultado de este tipo de accidentes, gran número de víctimas y la destrucción de infraestructura. En este artículo se discute la información original publicada en Perú hasta la actualidad y plantea propuestas generales para enfrentar el problema.The information indicates that the traffic accidents caused by bus drivers’ sleepiness or tiredness are frequent in our country. A driver that falls asleep while driving cannot perform evasive maneuvers in order to avoid crashes or getting off the track, being the result of this kind of accidents a great number of victims and infrastructure destruction. In this article we discuss the original data published in Peru up to date and make general proposals to face the problem.

  15. Bus Operations for Pupil Transportation. "Chrome-Yellow and Red Lights."

    Science.gov (United States)

    Rannels, Morris W.

    This paper is based on a committee report of the last National School Bus Conference on "Minimum Standards for School Buses." Standards for school bus operations are included for (1) administrators, (2) supervisors, (3) school bus drivers, (4) student passengers, and (5) maintenance and service personnel. The report deals also with procedures for…

  16. School Bus Safety: What Can Our Schools Do to Protect Our Children?

    Science.gov (United States)

    Dargan, Thomas J.; Silverstone, Adam H.

    2014-01-01

    School districts and school bus contractors are entrusted with the most important of all road users--our nation's children. In the wake of recent newsworthy accidents and attention grabbing headlines regarding unfit bus drivers, claims premised upon school bus accidents have become increasingly tangential and, in turn, personal injury attorneys…

  17. GO Bus impact analysis.

    Science.gov (United States)

    2013-08-01

    NJ TRANSIT launched two relatively new enhanced bus services: GO 25 serving the : Springfield Avenue corridor in 2008 and GO 28 serving the Bloomfield Avenue corridor in 2009. : As an enhanced but not full Bus Rapid Transit (BRT) service, GO Bus feat...

  18. Kajian Keamanan Pengoperasian Public Transport Tinjauan Terhadap Kekuatan Rangka Body Bus

    OpenAIRE

    Sudiro, B. M

    2010-01-01

    In order to meet the safety and security of the public transportation, design specification of construction body bus or bus frame structures should have an appropriate structural strength and comply with standard design including the safety factor and selection of material besides static and dynamic testing of the part of body bus. It is also realized that a bus carrying passengers have to give secure to the passengers also driver.The fact that a technology concerning with metal works indus...

  19. Natural gas powered bus; Erdgasbusprojekt

    Energy Technology Data Exchange (ETDEWEB)

    Ambuehl, D.; Fernandez, J.

    2003-07-01

    This report for the Swiss Federal Office of Energy presents the results of a project carried out by the Swiss Federal Institute of Technology in Zurich to evaluate the performance of a natural-gas-powered bus in comparison with two diesel buses. The report provides details on the vehicles, their routes and the results of interviews made with both passengers and drivers. Details of measurements made on fuel consumption and pollutant emissions are presented in tabular and graphical form, as are those made on noise emissions inside and outside the vehicles. The conclusions of the project are presented including economic aspects of using gas as a motor fuel. Also, the views of passengers, who were more concerned with comfort aspects, and drivers, who were more interested in technical aspects, are quoted.

  20. Locomotor diseases among male long-haul truck drivers and other professional drivers

    DEFF Research Database (Denmark)

    Jensen, Anker; Kaerlev, Linda; Tüchsen, Finn

    2007-01-01

    OBJECTIVE: High risks for locomotor diseases have been reported for bus and truck drivers in general; however, little is known about the specific risks of long-haul truck drivers. METHODS: Standardised hospitalisation ratios (SHR) for different locomotor diseases of bus drivers, long-haul truck...... drivers and other truck drivers were compared with each other and with the general Danish working population. RESULTS: Intervertebral disc disorders were more common among professional drivers (SHR: 119, 95% CI: 114-125) and of similar magnitude for cervical and non-cervical disorders. Both long......-haul truck drivers and bus drivers had higher SHR for intervertebral disc disorders (SHR: 133, 95% CI: 114-155/SHR: 141, 95% CI: 129-154, respectively) than other truck drivers (SHR: 109, 95% CI: 102-116). The SHR for carpal tunnel syndrome was high among long-haul drivers (SHR: 163, 95% CI: 101...

  1. PCI bus demystified

    CERN Document Server

    Abbott, Doug

    2004-01-01

    The peripheral component interconnect (PCI) bus is the dominant bus system used to connect the different elements making up today''s high-performance computer systems. Different PCI implementations have also been developed for such applications as telecommunications and embedded computing. If an application calls for high speed, high reliability, flexible configuration, and bus mastering, then PCI is the only logical bus choice. This book is an applications-oriented introduction to the PCI bus, with an emphasis on implementing PCI in a variety of computer architectures. Special attention is given to industrial and mission-critical applications of PCI bus.·Fully describes PCI electrical specifications, mechanical requirements, and signal types·Covers advanced topics through numerous design examples to increase the readers understanding of the subject ·Includes updated coverage of PCI-X 2.0

  2. Intelligent Bus Stops in the Flexible Bus Systems

    Directory of Open Access Journals (Sweden)

    Razi Iqbal

    2014-09-01

    Full Text Available The purpose of this paper is to discuss Intelligent Bus Stops in a special Demand Responsive Transit (DRT, the Flexible Bus System. These Intelligent Bus Stops are more efficient and information rich than Traditional Bus Stops. The real time synchronization of the Flexible Bus System makes it unique as compared to Traditional Bus Systems. The Main concern is to make Bus Stops intelligent and information rich. Buses are informed about the no. of passengers waiting at the upcoming Bus Stops. If there are no passengers to ride or get off on upcoming Bus Stop, the Bus can skip that Bus Stop and head towards the next Bus Stop where passenger is waiting, which will decrease the ride time of the passengers on the Bus and also the wait time of the passengers waiting on the upcoming Bus Stops. Providing more information at Bus Stops about the Destination (Time to Destination, Distance to Destination etc. and Buses (Bus Location, Arrival Time of Bus etc. makes it easier for the passengers to decide whether to ride a particular Bus or not.

  3. Driver rostering for bus transit companies

    NARCIS (Netherlands)

    Nurmi, K.; Kyngäs, J.; Post, Gerhard F.

    2011-01-01

    Staff scheduling has become increasingly important for both the public sector and private companies. Good rosters have many benefits for an organization, such as lower costs, more effective utilization of resources and fairer workloads and distribution of shifts. The process of constructing

  4. Locomotor diseases among male long-haul truck drivers and other professional drivers

    DEFF Research Database (Denmark)

    Jensen, Anker; Kaerlev, Linda; Tüchsen, Finn

    2007-01-01

    -haul truck drivers and bus drivers had higher SHR for intervertebral disc disorders (SHR: 133, 95% CI: 114-155/SHR: 141, 95% CI: 129-154, respectively) than other truck drivers (SHR: 109, 95% CI: 102-116). The SHR for carpal tunnel syndrome was high among long-haul drivers (SHR: 163, 95% CI: 101...

  5. TPG bus passes

    CERN Multimedia

    Staff Association

    2013-01-01

    The CERN Staff Association will stop selling TPG bus passes. All active and retired members of the CERN personnel will be able to purchase Unireso bus passes from the CERN Hostel - Building 39 (Meyrin site) from 1st February 2013. For more information: https://cds.cern.ch/journal/CERNBulletin/2013/04/Announcements/1505279?ln=en

  6. Electric bus systems.

    Science.gov (United States)

    2017-04-01

    Pure electric buses (EBs) offer an alternative fuel for the nations transit bus systems. To : evaluate EBs in a transit setting, this project investigated the five electric bus fleet of the : StarMetro transit system of the city of Tallahassee, FL...

  7. Bus driving assistance system for town area by using ATmega328P microcontroller

    Science.gov (United States)

    Zakaria, Mohamad Fauzi; Soon, Tan Jiah; Rohani, Munzilah Md

    2017-09-01

    Recently, several bus accidents happened because of bus driver's behavior. In fact, there is no dedicated tool for assisting them to drive safely. This project gives solutions to this by assisting the driver, according to the speed and acceleration of the bus. These data are collected by using a motion processing unit (MPU-6050) and a global positioning system (GPS) and then indicate the driving mode status on the LEDs. All data and status are recorded in a secure digital (SD) card for the authority or the bus company to analyze the driving behavior of a bus driver. This system has been successfully developed and tested in two different areas which includes the UTHM main campus and the road from Parit Raja to Batu Pahat.

  8. Savannah River bus project

    Energy Technology Data Exchange (ETDEWEB)

    Summers, W.A. [Westinghouse Savannah River Co., Aiken, SC (United States)

    1998-08-01

    The H2Fuel Bus is the world`s first hybrid hydrogen electric transit bus. It was developed through a public/private partnership involving several leading technology and industrial organizations in the Southeast, with primary funding and program management provided by the Department of Energy. The primary goals of the project are to gain valuable information on the technical readiness and economic viability of hydrogen buses and to enhance the public awareness and acceptance of emerging hydrogen technologies. The bus has been operated by the transit agency in Augusta, Georgia since April, 1997. It employs a hybrid IC engine/battery/electric drive system, with onboard hydrogen fuel storage based on the use of metal hydrides. Initial operating results have demonstrated an overall energy efficiency (miles per Btu) of twice that of a similar diesel-fueled bus and an operating range twice that of an all-battery powered electric bus. Tailpipe emissions are negligible, with NOx less than 0.2 ppm. Permitting, liability and insurance issues were addressed on the basis of extensive risk assessment and safety analyses, with the inherent safety characteristic of metal hydride storage playing a major role in minimizing these concerns. Future plans for the bus include continued transit operation and use as a national testbed, with potential modifications to demonstrate other hydrogen technologies, including fuel cells.

  9. LHC on the bus

    CERN Multimedia

    Laëtitia Pedroso

    2010-01-01

    On 15 December, an airport bus will be transformed in the image of CERN. The bus will be seen by the thousands of travellers arriving in Geneva, informing them of the possibility to visit CERN.   Sketch of the bus. The good relationship between Geneva International Airport and CERN started several years ago. In 2004 the airport put advertising space in the arrivals area at CERN's disposal free of charge. Now, starting on 15 December, a 40-foot long bus will display a giant sticker advertisement depicting CERN as it takes passengers over the airport tarmac to their planes. This is no ordinary sticker, and it was no mean task to attach it to the bus. The task of producing and attaching it was entrusted to Geneva-based specialists Mathys SA. With the ski season opening on 15 December, there will be many travellers arriving at the airport, and the bus will be ready to receive them. When one thinks of CERN, the subjects that naturally come to mind are the LHC, the mysteries of the Universe...

  10. Professional, ethical, and legal duties in the case of the diabetic bus ...

    African Journals Online (AJOL)

    , or one year of imprisonment, or both.[1]. The situation at hand, in which the bus driver's practitioner diagnoses the patient's condition outside a fitness-to-drive examination, is more problematic and forms the subject matter of this article.

  11. Risk factors associated with bus accident severity in the United States: a generalized ordered logit model.

    Science.gov (United States)

    Kaplan, Sigal; Prato, Carlo Giacomo

    2012-07-01

    Recent years have witnessed a growing interest in improving bus safety operations worldwide. While in the United States buses are considered relatively safe, the number of bus accidents is far from being negligible, triggering the introduction of the Motor-coach Enhanced Safety Act of 2011. The current study investigates the underlying risk factors of bus accident severity in the United States by estimating a generalized ordered logit model. Data for the analysis are retrieved from the General Estimates System (GES) database for the years 2005-2009. Results show that accident severity increases: (i) for young bus drivers under the age of 25; (ii) for drivers beyond the age of 55, and most prominently for drivers over 65 years old; (iii) for female drivers; (iv) for very high (over 65 mph) and very low (under 20 mph) speed limits; (v) at intersections; (vi) because of inattentive and risky driving. Copyright © 2012 National Safety Council and Elsevier Ltd. All rights reserved.

  12. Risk factors associated with bus accident severity in the United States: A generalized ordered logit model

    DEFF Research Database (Denmark)

    Kaplan, Sigal; Prato, Carlo Giacomo

    2012-01-01

    Introduction: Recent years have witnessed a growing interest in improving bus safety operations worldwide. While in the United States buses are considered relatively safe, the number of bus accidents is far from being negligible, triggering the introduction of the Motor-coach Enhanced Safety Act...... of 2011. Method: The current study investigates the underlying risk factors of bus accident severity in the United States by estimating a generalized ordered logit model. Data for the analysis are retrieved from the General Estimates System (GES) database for the years 2005–2009. Results: Results show...... that accident severity increases: (i) for young bus drivers under the age of 25; (ii) for drivers beyond the age of 55, and most prominently for drivers over 65 years old; (iii) for female drivers; (iv) for very high (over 65 mph) and very low (under 20 mph) speed limits; (v) at intersections; (vi) because...

  13. Uma proposta de solução para o problema da construção de escalas de motoristas e cobradores de ônibus por meio do algoritmo do matching de peso máximo A proposed solution for bus driver and fare collector scheduling problems using the maximum weight matching algorithm

    Directory of Open Access Journals (Sweden)

    Paulo Henrique Siqueira

    2004-08-01

    Full Text Available O objetivo deste trabalho é mostrar a aplicação do Algoritmo do Matching de peso máximo, na elaboração de jornadas de trabalho para motoristas e cobradores de ônibus. Este problema deve ser resolvido levando-se em consideração o maior aproveitamento possível das tabelas de horários, com o objetivo de minimizar o número de funcionários, de horas extras e de horas ociosas. Desta forma, os custos das companhias de transporte público são minimizados. Na primeira fase do trabalho, supondo-se que as tabelas de horários já estejam divididas em escalas de curta e de longa duração, as escalas de curta duração são combinadas para a formação da jornada diária de trabalho de um funcionário. Esta combinação é feita com o Algoritmo do Matching de peso máximo, no qual as escalas são representadas por vértices de um grafo, e o peso máximo é atribuído às combinações de escalas que não formam horas extras e horas ociosas. Na segunda fase, uma jornada de final de semana é designada para cada jornada semanal de dias úteis. Por meio destas duas fases, as jornadas semanais de trabalho para motoristas e cobradores de ônibus podem ser construídas com custo mínimo. A terceira e última fase deste trabalho consiste na designação das jornadas semanais de trabalho para cada motorista e cobrador de ônibus, considerando-se suas preferências. O Algoritmo do Matching de peso máximo é utilizado para esta fase também. Este trabalho foi aplicado em três empresas de transporte público da cidade de Curitiba - PR, nas quais os algoritmos utilizados anteriormente eram heurísticos, baseados apenas na experiência do encarregado por esta tarefa.The purpose of this paper is to discuss how the maximum weight Matching Algorithm can be applied to schedule the workdays of bus drivers and bus fare collectors. This scheduling should be based on the best possible use of timetables in order to minimize the number of employees, overtime and

  14. Learning NServiceBus

    CERN Document Server

    Boike, David

    2013-01-01

    This is a practical tutorial containing hands-on examples for creating a messaging and SOA based service bus.This book is for .NET developers who are looking for ways to overcome problems related to buggy third party web service integrations, codebases that have grown into a big ball of mud, and batch jobs failure.

  15. School bus crash rates on routine and nonroutine routes.

    Science.gov (United States)

    O'Neal, Elizabeth; Ramirez, Marizen; Hamann, Cara; Young, Tracy; Stahlhut, Mary; Peek-Asa, Corinne

    2014-09-01

    Although prior research has established that school buses are a safe form of transportation, crashes can produce catastrophic consequences. School buses have 2 types of routes: predictable, routine routes that take children to and from school and less predictable, nonroutine routes for school events. No studies have examined school bus crash incidence and characteristics by these route types. School bus crashes were identified from the Iowa Department of Transportation Crash Database from mid-2005 through mid-2010. Crash reports did not identify whether the bus was on a routine or nonroutine route, so a protocol to assign these based on day and time was developed. Bus mileage was provided by the Iowa Department of Education. The school bus crash rate was 2.1 times higher on nonroutine routes than on routine routes (95% CI = 1.8-2.3). Most crashes involved an improper action by the driver of another vehicle. In crashes attributed to improper actions of school buses, failure to yield the right-of-way and disregarding traffic signs were more common on routine routes, while losing control, speeding, reckless, or aggressive driving were more common on nonroutine routes. School bus crashes are more likely to occur on nonroutine routes. © 2014, American School Health Association.

  16. Schoolbus driver performance can be improved with driver training ...

    African Journals Online (AJOL)

    for the largest passenger loads, i.e. bus drivers.[6]. To address these challenges, practical interventions are required, especially to promote the child's safe travel to and from school in SA and further afield. These include the protection of vehicle occupants by means of functioning seat belts and use thereof, airbag use and.

  17. Cedar Avenue driver assist system evaluation report.

    Science.gov (United States)

    2011-12-01

    This paper summarizes an evaluation of the Driver Assist System (DAS) used by the Minnesota Valley Transit Authority (MTVA) for bus shoulder operations. The DAS is a GPS-based technology suite that provides lane-position feedback to the driver via a ...

  18. Prevalência de fatores de risco para a síndrome da apnéia obstrutiva do sono em motoristas de ônibus interestadual Prevalence of risk factors for obstructive sleep apnea syndrome in interstate bus drivers

    Directory of Open Access Journals (Sweden)

    Carlos Alberto de Assis Viegas

    2006-04-01

    Full Text Available OBJETIVO: Verificar a prevalência de fatores de risco para a síndrome da apnéia obstrutiva do sono em motoristas de ônibus interestadual. MÉTODOS: Foram avaliados 262 motoristas profissionais de ônibus interestadual, de empresa brasileira baseada no Distrito Federal, por questionário para avaliar distúrbios respiratórios do Sono, Escala de Sonolência de Epworth, testes de atenção concentrada e difusa, e medidas antropométricas. RESULTADOS: Encontravam-se com o peso acima do ideal 68% da amostra estudada, dos quais 34% apresentaram circunferência do pescoço = 42 cm. Durante o trabalho os motoristas referiram uso de tabaco (27%, refrigerantes à base de cola (55%, álcool (65% e café (88%, e 28% dos motoristas apresentaram mais de dez pontos na Escala de Sonolência de Epworth. Houve ainda 36% de roncadores, 5% referiram paradas respiratórias durante o sono, 12% apresentaram sensação de sufocamento, 29% sono agitado e 48% referiram sentir sono ao dirigir. Já se envolveram em acidentes de trânsito 42% dos motoristas e em 7,6% dos casos o acidente foi devido a sonolência excessiva. Aqueles com mais de dez pontos na Escala de Sonolência de Epworth apresentaram nível de atenção concentrada comprometido e quanto maior a circunferência do pescoço e a hipersonolência, menor a atenção difusa. CONCLUSÃO: No grupo de motoristas estudados, há uso alarmante de substâncias estimulantes e alta prevalência de hipersonolência diurna, que leva a diminuição da atenção.OBJECTIVE: To determine the prevalence of risk factors for obstructive sleep apnea syndrome in interstate bus drivers. METHODS: This study involved 262 professional interstate bus drivers employed by a Brazilian company headquartered in the Federal District. The drivers were evaluated using a questionnaire designed to assess respiratory sleep disorders, the Epworth Sleepiness Scale, test of sustained attention, test of divided attention and anthropometric

  19. Modeling the Coordinated Operation between Bus Rapid Transit and Bus

    Directory of Open Access Journals (Sweden)

    Jiaqing Wu

    2015-01-01

    Full Text Available The coordination between bus rapid transit (BRT and feeder bus service is helpful in improving the operational efficiency and service level of urban public transport system. Therefore, a coordinated operation model of BRT and bus is intended to develop in this paper. The total costs are formulated and optimized by genetic algorithm. Moreover, the skip-stop BRT operation is considered when building the coordinated operation model. A case of the existing bus network in Beijing is studied, the proposed coordinated operation model of BRT and bus is applied, and the optimized headway and costs are obtained. The results show that the coordinated operation model could effectively decrease the total costs of the transit system and the transfer time of passengers. The results also suggest that the coordination between the skip-stop BRT and bus during peak hour is more effective than non-coordination operation.

  20. Cansancio y somnolencia en conductores de ómnibus interprovinciales: estudio comparativo entre formalidad e informalidad Fatigue and sleepiness in interprovincial road bus drivers: comparative study between formality and informality

    Directory of Open Access Journals (Sweden)

    Gustavo R. Liendo

    2010-06-01

    Full Text Available Objetivos. Comparar los niveles de cansancio, somnolencia y sus repercusiones entre conductores formales e informales de ómnibus interprovinciales. Evaluar las condiciones laborales en ambos grupos de estudio. Materiales y métodos. Se realizó un estudio transversal comparativo con muestreo no probabilístico. Se incluyó 100 empresas de transporte terrestre, de las cuales 17 fueron formales según registros oficiales del Ministerio de Transportes y Comunicaciones (MTC, asimismo, los conductores se catalogaron como formales o informales. La encuesta incluía un cuestionario y la versión peruana validada de la escala de somnolencia de Epworth. Resultados. Participaron 71 conductores formales y 274 informales, todos fueron varones. De 134 conductores que pertenecían a las empresas formales de acuerdo al MTC, sólo 43 (32% pertenecen al grupo formal en base a los criterios propuestos. El 48% (34 de los conductores formales y el 43% (118 de los informales duermen menos de siete horas al día. Admitieron haberse accidentado o "casi accidentado" el 48% (34 de los formales y 135 (49% informales; el horario más frecuente fue entre la 01.00 y 04.00 horas. La madrugada es el período en que ambos grupos sienten más cansancio. El 44% (30 de los conductores formales y el 54% (144 de informales realizan cinco o más turnos nocturnos por semana. Del total de los entrevistados, el 16% (56 presentaron somnolencia. La asociación con accidentes de tránsito fue similar. Conclusiones. Los niveles de cansancio y somnolencia fueron similares entre conductores formales e informales. Aquellas empresas catalogadas como formales, presentan alto porcentaje de informalidad entre sus conductores.Objectives. To compare the levels of fatigue, sleepiness and their consequences between formal and informal drivers of interprovincial buses. To evaluate labor conditions between both study groups. Materials and methods. A comparative cross-sectional study was performed with

  1. BBIS: Beacon Bus Information System

    Science.gov (United States)

    Kasim, Shahreen; Hafit, Hanayanti; Pei Juin, Kong; Afizah Afif, Zehan; Hashim, Rathiah; Ruslai, Husni; Jahidin, Kamaruzzaman; Syafwan Arshad, Mohammad

    2016-11-01

    Lack of bus information for example bus timetable, status of the bus and messy advertisement on bulletin board at the bus stop will give negative impact to tourist. Therefore, a real-time update bus information bulletin board provides all information needed so that passengers can save their bus information searching time. Supported with Android or iOS, Beacon Bus Information System (BBIS) provides bus information between Batu Pahat and Kluang area. BBIS is a system that implements physical web technology and interaction on demand. It built on Backend-as-a-Service, a cloud solution and Firebase non relational database as data persistence backend and syncs between user client in the real-time. People walk through bus stop with smart device and do not require any application. Bluetooth Beacon is used to achieve smart device's best performance of data sharing. Intellij IDEA 15 is one of the tools that that used to develop the BBIS system. Multi-language included front end and backend supported Integration development environment (IDE) helped to speed up integration process.

  2. An Interactive Wireless Communication System for Visually Impaired People Using City Bus Transport

    Directory of Open Access Journals (Sweden)

    Hsiao-Lan Wang

    2014-04-01

    Full Text Available Visually impaired people have difficulty accessing information about public transportation systems. Several systems have been developed for assisting visually impaired and blind people to use the city bus. Most systems provide only one-way communication and require high-cost and complex equipment. The purpose of this study is to reduce the difficulties faced by visually impaired people when taking city buses, using an interactive wireless communication system. The system comprised a user module and a bus module to establish a direct one-to-one connection. When the user inputs 4-digit numbers, the user module immediately sends out the information. If the bus module receives the matched bus number, it buzzes and the warning LED flashes to notify the bus driver that someone is waiting to board on the bus. User tests were conducted by two visually impaired people in a simulated vehicle and a city bus. The success rate of interactive wireless communication, recognizing the arrival of the bus and boarding the correct bus reached 100% in all of the tests. The interactive wireless communication aid system is a valid and low-cost device for assisting visually impaired people to use city buses.

  3. An interactive wireless communication system for visually impaired people using city bus transport.

    Science.gov (United States)

    Wang, Hsiao-Lan; Chen, Ya-Ping; Rau, Chi-Lun; Yu, Chung-Huang

    2014-04-25

    Visually impaired people have difficulty accessing information about public transportation systems. Several systems have been developed for assisting visually impaired and blind people to use the city bus. Most systems provide only one-way communication and require high-cost and complex equipment. The purpose of this study is to reduce the difficulties faced by visually impaired people when taking city buses, using an interactive wireless communication system. The system comprised a user module and a bus module to establish a direct one-to-one connection. When the user inputs 4-digit numbers, the user module immediately sends out the information. If the bus module receives the matched bus number, it buzzes and the warning LED flashes to notify the bus driver that someone is waiting to board on the bus. User tests were conducted by two visually impaired people in a simulated vehicle and a city bus. The success rate of interactive wireless communication, recognizing the arrival of the bus and boarding the correct bus reached 100% in all of the tests. The interactive wireless communication aid system is a valid and low-cost device for assisting visually impaired people to use city buses.

  4. Bus lane efficiency analysis

    OpenAIRE

    Tovornik, Peter

    2006-01-01

    The upper Celovška road has been dealing with traffic jams for quite some time now. Traffic jams are concentrated in time of morning (in direction towards towns center) and afternoon (in direction towards Gorenjska) peak hour , whereas jams in between times are not excluded. There are many solutions to solve the problem and are variable. In this assigment I am focusing on one of potencial solutions, with special bus lanes. It is a measure that can be, if used in right way, very effective and ...

  5. Learning NServiceBus Sagas

    CERN Document Server

    Helton, Rich

    2015-01-01

    If you are an Enterprise C# developer who wishes to extend your knowledge of NServiceBus and Enterprise Service Bus in C#, this is the book for you. This book is designed to enhance the education of ESBs and their messaging, whether you are a beginner or a seasoned expert in Enterprise C#, Apex, and Visualforce pages.

  6. Operating Time Division for a Bus Route Based on the Recovery of GPS Data

    Directory of Open Access Journals (Sweden)

    Jian Wang

    2017-01-01

    Full Text Available Bus travel time is an important source of data for time of day partition of the bus route. However, in practice, a bus driver may deliberately speed up or slow down on route so as to follow the predetermined timetable. The raw GPS data collected by the GPS device equipped on the bus, as a result, cannot reflect its real operating conditions. To address this concern, this study first develops a method to identify whether there is deliberate speed-up or slow-down movement of a bus. Building upon the relationships between the intersection delay, link travel time, and traffic flow, a recovery method is established for calculating the real bus travel time. Using the dwell time at each stop and the recovered travel time between each of them as the division indexes, a sequential clustering-based time of day partition method is proposed. The effectiveness of the developed method is demonstrated using the data of bus route 63 in Harbin, China. Results show that the partition method can help bus enterprises to design reasonable time of day intervals and significantly improve their level of service.

  7. Survey on the implementation and reliability of CubeSat electrical bus interfaces

    Science.gov (United States)

    Bouwmeester, Jasper; Langer, Martin; Gill, Eberhard

    2017-06-01

    This paper provides results and conclusions on a survey on the implementation and reliability aspects of CubeSat bus interfaces, with an emphasis on the data bus and power distribution. It provides recommendations for a future CubeSat bus standard. The survey is based on a literature study and a questionnaire representing 60 launched CubeSats and 44 to be launched CubeSats. It is found that the bus interfaces are not the main driver for mission failures. However, it is concluded that the Inter Integrated Circuit (I2C) data bus, as implemented in a great majority of the CubeSats, caused some catastrophic satellite failures and a vast amount of bus lockups. The power distribution may lead to catastrophic failures if the power lines are not protected against overcurrent. A connector and wiring standard widely implemented in CubeSats is based on the PC/104 standard. Most participants find the 104 pin connector of this standard too large. For a future CubeSat bus interface standard, it is recommended to implement a reliable data bus, a power distribution with overcurrent protection and a wiring harness with smaller connectors compared with PC/104.

  8. Fairness in optimizing bus-crew scheduling process.

    Science.gov (United States)

    Ma, Jihui; Song, Cuiying; Ceder, Avishai Avi; Liu, Tao; Guan, Wei

    2017-01-01

    This work proposes a model considering fairness in the problem of crew scheduling for bus drivers (CSP-BD) using a hybrid ant-colony optimization (HACO) algorithm to solve it. The main contributions of this work are the following: (a) a valid approach for cases with a special cost structure and constraints considering the fairness of working time and idle time; (b) an improved algorithm incorporating Gamma heuristic function and selecting rules. The relationships of each cost are examined with ten bus lines collected from the Beijing Public Transport Holdings (Group) Co., Ltd., one of the largest bus transit companies in the world. It shows that unfair cost is indirectly related to common cost, fixed cost and extra cost and also the unfair cost approaches to common and fixed cost when its coefficient is twice of common cost coefficient. Furthermore, the longest time for the tested bus line with 1108 pieces, 74 blocks is less than 30 minutes. The results indicate that the HACO-based algorithm can be a feasible and efficient optimization technique for CSP-BD, especially with large scale problems.

  9. Taxi 'sugar daddies' and taxi queens: Male taxi driver attitudes ...

    African Journals Online (AJOL)

    Cheryl Potgieter, Anna Strebel, Tamara Shefer, and Claire Wagner

    2012-12-14

    Dec 14, 2012 ... Abstract. Media reports are emerging on the phenomenon of young girls who travel with older mini-bus taxi drivers, and who are thought to have sex with the drivers in exchange for gifts and money. The extent to which such relationships might facilitate unsafe sexual practices and increased risks for both ...

  10. 75 FR 52054 - Bus and Bus Facilities Discretionary Program Funds

    Science.gov (United States)

    2010-08-24

    ... 8, 2009. The Livability Bus program makes funds available to public transit providers to finance... 2-New York, Administrator, Region 7-Kansas One Bowling Green, Room 429, New City, MO, 901 Locust... Metropolitan Office, Region 2-New York, One Bowling Green, Room 428, New York, NY 10004-1415, Tel. 212-668-2202...

  11. 75 FR 23843 - Discretionary Bus and Bus Facilities Program

    Science.gov (United States)

    2010-05-04

    ... assistance to subrecipients that are public agencies, private companies engaged in public transportation, or... bus-related projects for assistance to subrecipients that are public agencies, private companies... projects for assistance to subrecipients that are public agencies, private companies engaged in public...

  12. HERMES travels by CAN bus

    Science.gov (United States)

    Waller, Lewis G.; Shortridge, Keith; Farrell, Tony J.; Vuong, Minh; Muller, Rolf; Sheinis, Andrew I.

    2014-07-01

    The new HERMES spectrograph represents the first foray by AAO into the use of commercial off-the-shelf industrial field bus technology for instrument control, and we regard the final system, with its relatively simple wiring requirements, as a great success. However, both software and hardware teams had to work together to solve a number of problems integrating the chosen CANopen/CAN bus system into our normal observing systems. A Linux system running in an industrial PC chassis ran the HERMES control software, using a PCI CAN bus interface connected to a number of distributed CANopen/CAN bus I/O devices and servo amplifiers. In the main, the servo amplifiers performed impressively, although some experimentation with homing algorithms was required, and we hit a significant hurdle when we discovered that we needed to disable some of the encoders used during observations; we learned a lot about how servo amplifiers respond when their encoders are turned off, and about how encoders react to losing power. The software was based around a commercial CANopen library from Copley Controls. Early worries about how this heavily multithreaded library would work with our standard data acquisition system led to the development of a very low-level CANopen software simulator to verify the design. This also enabled the software group to develop and test almost all the control software well in advance of the construction of the hardware. In the end, the instrument went from initial installation at the telescope to successful commissioning remarkably smoothly.

  13. Implementation of PMSM speed control software based on CAN bus

    Science.gov (United States)

    Cao, Wenlun; Chen, Bei; He, Yuyao

    2013-03-01

    In this paper, the driver's hardware structure based on TMS320F28335 is introduced, the control software flow of host computer based on CAN bus is designed, the rule of CAN communication protocol is fulfilled and accordingly the hybrid programming is realized in the background of low speed and large sinusoid operation. This system can realize the CAN communication setting, download the PID parameters to DSP, operate at constant rotate speed and at given large sinusoid rotate speed. Meanwhile the dynamical monitoring and alarm are implemented. Finally the real-time display and storage of measured current, voltage and rotate speed are completed well.

  14. THE PREVALENCE OF MUSCULOSKELETAL DISORDERS AMONG BUS DRIVERS IN TRICITY

    OpenAIRE

    Lalit; Retasha Soni; Sudhir Garg

    2015-01-01

    Background: Musculoskeletal disorders are widespread in many countries around the world. It has been reported that about 58 percent of the world's population over the age of 10 years spent one third of their life span at work. The population at a high risk include nursing facilities, transportation, mining, food processing, leather tanning, heavy and light manufacturing. Transport workers have been found to be at high risk of developing work related musculoskeletal disorders (WRMSDs). There h...

  15. Electrical system architecture having high voltage bus

    Science.gov (United States)

    Hoff, Brian Douglas [East Peoria, IL; Akasam, Sivaprasad [Peoria, IL

    2011-03-22

    An electrical system architecture is disclosed. The architecture has a power source configured to generate a first power, and a first bus configured to receive the first power from the power source. The architecture also has a converter configured to receive the first power from the first bus and convert the first power to a second power, wherein a voltage of the second power is greater than a voltage of the first power, and a second bus configured to receive the second power from the converter. The architecture further has a power storage device configured to receive the second power from the second bus and deliver the second power to the second bus, a propulsion motor configured to receive the second power from the second bus, and an accessory motor configured to receive the second power from the second bus.

  16. Indicadores psicossociais relacionados a acidentes de trânsito envolvendo motoristas de ônibus Indicadores psicosociales relacionados a accidentes de tráfico envolviendo conductores de ómnibus Psychological and social indicators associated to traffic accidents involving bus drivers

    Directory of Open Access Journals (Sweden)

    Andréa Carla Ferreira de Oliveira

    2007-04-01

    retraso y problemas familiares. La perspectiva temporal de presente no mostró relación con envolvimiento en accidentes. Se concluyó que la incidencia del envolvimiento de conductores de ómnibus en accidentes de tráfico puede ser evitada, o al menos disminuida, por medio de mejorías de aquellas condiciones de trabajo y de políticas públicas de salud y seguridad pública.Psychological and social conditions potentially related to traffic accidents involving bus drivers are identified. Participants were 457 drivers, males and employees of local public transportation companies of Natal, RN, Brazil. Questionnaire contained items on professional performance comprising potentially stressing situations, effects of organizational policies and socio-demographic characteristics, in addition to Zimbardo Time Perspective Inventory and Epworth Sleepiness Scale. Variables highly associated to accident occurrences included extra work hours, work during vacations, medical leave, passengers' complaints, excessive daytime sleepiness, and concern about sleep, arriving late and family problems. Present time perspective was not related to involvement in accidents. Results suggest that involvement in traffic accidents may be avoided, or at least diminished, by an improvement in work conditions and through public policies of health and safety.

  17. PinBus Interface Design

    Energy Technology Data Exchange (ETDEWEB)

    Hammerstrom, Donald J.; Adgerson, Jewel D.; Sastry, Chellury; Pratt, Richard M.; Pratt, Robert G.

    2009-12-30

    On behalf of the U.S. Department of Energy, PNNL has explored and expanded upon a simple control interface that might have merit for the inexpensive communication of smart grid operational objectives (demand response, for example) to small electric end-use devices and appliances. The approach relies on bi-directional communication via the electrical voltage states of from one to eight shared interconnection pins. The name PinBus has been suggested and adopted for the proposed interface protocol. The protocol is defined through the presentation of state diagrams and the pins’ functional definitions. Both simulations and laboratory demonstrations are being conducted to demonstrate the elegance and power of the suggested approach. PinBus supports a very high degree of interoperability across its interfaces, allowing innumerable pairings of devices and communication protocols and supporting the practice of practically any smart grid use case.

  18. A Rule-Based Energy Management Strategy for a Plug-in Hybrid School Bus Based on a Controller Area Network Bus

    Directory of Open Access Journals (Sweden)

    Jiankun Peng

    2015-06-01

    Full Text Available This paper presents a rule-based energy management strategy for a plug-in hybrid school bus (PHSB. In order to verify the effectiveness and rationality of the proposed energy management strategy, the powertrain and control models were built with MATLAB/Simulink. The PHSB powertrain model includes an engine model, ISG (integrated started and generator model, drive motor model, power battery packs model, driver model, and vehicle longitudinal dynamics model. To evaluate the controller area network (CAN bus performance features such as the bus load, signal hysteresis, and to verify the reliability and real-time performance of the CAN bus multi-node control method, a co-simulation platform was built with CANoe and MATLAB/Simulink. The co-simulation results show that the control strategy can meet the requirements of the PHSB’s dynamic performance. Meanwhile, the charge-depleting mode (CD and charge-sustaining mode (CS can switch between each other and maintain a state-of-charge (SoC of around 30%, indicating that the energy management strategy effectively extends the working period of the CD mode and improves the fuel economy further. The energy consumption per 100 km includes 13.7 L diesel and 10.5 kW·h electricity with an initial SoC of 75%. The CANoe simulation results show that the bus communication performs well without error frames.

  19. Avionic Data Bus Integration Technology

    Science.gov (United States)

    1991-12-01

    address the hardware-software interaction between a digital data bus and an avionic system. Very Large Scale Integration (VLSI) ICs and multiversion ...the SCP. In 1984, the Sperry Corporation developed a fault tolerant system which employed multiversion programming, voting, and monitoring for error... MULTIVERSION PROGRAMMING. N-version programming. 226 N-VERSION PROGRAMMING. The independent coding of a number, N, of redundant computer programs that

  20. New TPG bus route 28

    CERN Multimedia

    2003-01-01

    Geneva's Public Transport services (TPG) have recently inaugurated a new bus line 28, connecting the La Tour Hospital in Meyrin to the international organisations in Geneva, via the airport. All signs associated with this route will be yellow in colour. Timetables and route details can be found at http://www.tpg.ch. Relations with the Host States Service http://www.cern.ch/relations/ Tel. 72848

  1. DRIVER INATTENTION

    Directory of Open Access Journals (Sweden)

    Richard TAY

    2004-01-01

    Full Text Available Driver inattention, especially driver distraction, is an extremely influential but generally neglected contributing factor of road crashes. This paper explores some of the common behaviours associated with several common forms of driver inattention, with respect to their perceived crash risks, rates of self-reported behaviours and whether drivers regulate such behaviours depending on the road and traffic environment, and provides some policy recommendations to address issues raised.

  2. Impact of Efficient Driving in Professional Bus Fleets

    Directory of Open Access Journals (Sweden)

    Roberto Garcia

    2017-12-01

    Full Text Available Diesel engines of the vehicles in the transport sector are responsible for most of the CO2 emissions into the environment. An alternative to reduce fuel consumption is to promote efficient driving techniques. The aim of this paper is to assess the impact of efficient driving on fuel consumption in professional fleets. Data captured from the engine control unit (ECU of the vehicles are complemented with external information from weather stations and context data from the transport companies. The paper proposes linear and quadratic models in order to quantify the impact of all the terms influencing energy consumption. The analysis was made from the traces captured from a passenger transport company in Spain with more than 50 bus routes. 20 vehicles of five different models were monitored and 58 drivers participated in the study. The results indicate that efficient driving has significant influence on fuel consumption, which confirms efficient driving as a valid and economical option for reducing consumption and therefore emissions of harmful particles into the atmosphere. According to the proposed model, in average external conditions, a driver that increases efficiency from 25% to 75% can reach savings in fuel consumption of up to 16 L/100 km in the analysed bus fleet, which is a significant improvement considering the long distances covered by professionals of the transport sector.

  3. 76 FR 78732 - FY 2011 Discretionary Funding Opportunity; Section 5309 Bus and Bus Facilities Veterans...

    Science.gov (United States)

    2011-12-19

    ... Administration's priority of supporting America's veterans and military families, as well as the objectives of... Federal Transit Administration FY 2011 Discretionary Funding Opportunity; Section 5309 Bus and Bus Facilities Veterans Transportation and Community Living Initiative AGENCY: Federal Transit Administration...

  4. National fuel cell bus program : proterra fuel cell hybrid bus report, Columbia demonstration.

    Science.gov (United States)

    2011-10-01

    This report summarizes the experience and early results from a fuel cell bus demonstration funded by the Federal Transit Administration (FTA) under the National Fuel Cell Bus Program. A team led by the Center for Transportation and the Environment an...

  5. Work stress related lipid disorders and arterial hypertension in professional drivers: A cross-sectional study

    OpenAIRE

    Đinđić, Nataša; Jovanović, Jovica; Đinđić, Boris; Jovanović, Milan; Pešić, Milica; Jovanović, Jovana J.

    2013-01-01

    Background/Aim. Occupational stress is a term used to define ongoing stress that is related to the workplace. The study was conducted to determine association of occupational stress index (OSI) and its aspects with arterial hypertension and lipid disorders using data from a cross-sectional survey of male professional drivers. Methods. The cross-sectional study was performed in 439 professional drivers divided into groups (city- and intercity bus drivers, truck and taxi drivers). The OSI...

  6. Design of a control system for glass greenhouses based on the CAN-bus

    Science.gov (United States)

    Wu, Fei-qing; Zhang, Li-bin; Xu, Fang; Chen, Jiao-liao

    2008-12-01

    Greenhouses can by their control systems provide a good environment for growing crops, raising crop yield and improving crop quality. According to the trait of glass greenhouse control and development trend, the paper introduces a five-level control system based on an embedded CAN-Bus. The field monitoring level using the ARM processor, is communicating with the device level via the CAN-Bus. The central monitoring level communicates with field monitoring level via TCP/IP. The paper introduced some key technologies about the software such as the CAN-Bus driver, an intelligent control strategy, a database technology and a remote control technology. The system had the characteristic of an amicable interface and a modular and open structure. It has been in use for two years in the greenhouse of the Zhejiang university of technology, which showed that the system was reliable and effective.

  7. Bus transport in Greater Manchester

    DEFF Research Database (Denmark)

    Sørensen, Claus Hedegaard; Gudmundsson, Henrik

    is that ‘organisation matters’ and that the reforms may have changed significantly the institutional conditions for the implementation of sustainable transport policies and easures. We have focused the research on public transport in larger cities and how their organisation has changed due to the reforms. At the NECTAR......, and will be elaborated by the time of the NECTAR workshop in May: • Deregulation and privatisation have not changed negative trends in modal split in Greater Manchester, but likely made it worse at least compared to London. • Deregulation and privatisation have worsened conditions for a greening of the bus fleets...

  8. American fuel cell bus project : first analysis report.

    Science.gov (United States)

    2013-06-01

    This report summarizes the experience and early results from the American Fuel Cell Bus Project, a fuel cell electric bus demonstration : funded by the Federal Transit Administration (FTA) under the National Fuel Cell Bus Program. A team led by CALST...

  9. Data fusion for driver behaviour analysis.

    Science.gov (United States)

    Carmona, Juan; García, Fernando; Martín, David; Escalera, Arturo de la; Armingol, José María

    2015-10-14

    A driver behaviour analysis tool is presented. The proposal offers a novel contribution based on low-cost hardware and advanced software capabilities based on data fusion. The device takes advantage of the information provided by the in-vehicle sensors using Controller Area Network Bus (CAN-BUS), an Inertial Measurement Unit (IMU) and a GPS. By fusing this information, the system can infer the behaviour of the driver, providing aggressive behaviour detection. By means of accurate GPS-based localization, the system is able to add context information, such as digital map information, speed limits, etc. Several parameters and signals are taken into account, both in the temporal and frequency domains, to provide real time behaviour detection. The system was tested in urban, interurban and highways scenarios.

  10. Data Fusion for Driver Behaviour Analysis

    Directory of Open Access Journals (Sweden)

    Juan Carmona

    2015-10-01

    Full Text Available A driver behaviour analysis tool is presented. The proposal offers a novel contribution based on low-cost hardware and advanced software capabilities based on data fusion. The device takes advantage of the information provided by the in-vehicle sensors using Controller Area Network Bus (CAN-BUS, an Inertial Measurement Unit (IMU and a GPS. By fusing this information, the system can infer the behaviour of the driver, providing aggressive behaviour detection. By means of accurate GPS-based localization, the system is able to add context information, such as digital map information, speed limits, etc. Several parameters and signals are taken into account, both in the temporal and frequency domains, to provide real time behaviour detection. The system was tested in urban, interurban and highways scenarios.

  11. Effects of the window openings on the micro-environmental condition in a school bus

    Science.gov (United States)

    Li, Fei; Lee, Eon S.; Zhou, Bin; Liu, Junjie; Zhu, Yifang

    2017-10-01

    School bus is an important micro-environment for children's health because the level of in-cabin air pollution can increase due to its own exhaust in addition to on-road traffic emissions. However, it has been challenging to understand the in-cabin air quality that is associated with complex airflow patterns inside and outside a school bus. This study conducted Computational Fluid Dynamics (CFD) modeling analyses to determine the effects of window openings on the self-pollution for a school bus. Infiltration through the window gaps is modeled by applying variable numbers of active computational cells as a function of the effective area ratio of the opening. The experimental data on ventilation rates from the literature was used to validate the model. Ultrafine particles (UFPs) and black carbon (BC) concentrations were monitored in ;real world; field campaigns using school buses. This modeling study examined the airflow pattern inside the school bus under four different types of side-window openings at 20, 40, and 60 mph (i.e., a total of 12 cases). We found that opening the driver's window could allow the infiltration of exhaust through window/door gaps in the back of school bus; whereas, opening windows in the middle of the school bus could mitigate this phenomenon. We also found that an increased driving speed (from 20 mph to 60 mph) could result in a higher ventilation rate (up to 3.4 times) and lower mean age of air (down to 0.29 time) inside the bus.

  12. Concentrations and risk assessment of selected monoaromatic hydrocarbons in buses and bus stations of Hangzhou, China.

    Science.gov (United States)

    Li, Shuang; Chen, Shuguang; Zhu, Lizhong; Chen, Xiasheng; Yao, Chaoying; Shen, Xueyou

    2009-03-01

    Air pollution surveys of ten selected monoaromatic hydrocarbons (MAHCs) were conducted in buses and bus stations in Hangzhou, China. The mean concentrations of MAHCs in the air of buses and bus stations were 95.9 and 36.5 microg/m(3), respectively, of which toluene was the highest in all the sampling sites. Mean concentrations of all MAHCs in buses were statistically higher than those nearby bus stations (pvehicle conditions (including vehicle type, fuel type, interior decoration, etc.) and traffic conditions (mainly traffic density). Among the investigated buses, microbuses had the highest MAHCs level, while electric buses had the lowest. Buses driven in downtown had the highest MAHCs level, followed by those in suburban areas and tourist areas. The mean concentration ratio of toluene to benzene was 2.1+/-0.9, indicating that vehicle emission was the dominant source of MAHCs. Interior decorations, such as painting and surface coating, could also contribute to the MAHCs in the buses. The mean lifetime carcinogenic risks for passengers and bus drivers were 1.11x10(-5) and 4.00x10(-5), respectively, which were way above the limit set by USEPA. The health risk caused by MAHCs in bus microenvironment should be cautioned.

  13. Mastering NServiceBus and persistence

    CERN Document Server

    Helton, Rich

    2014-01-01

    This book is intended for developers, designers, and architects alike who wish to build C# NServiceBus enterprise architectures and learn how ESB persists data and messages to help them attain their goals. No prior knowledge of persistence in NServiceBus is required.

  14. Noise exposure inside transit buses in Kerman: measurements, drivers and passengers attitudes

    Directory of Open Access Journals (Sweden)

    Ghorbanali Mohammadi

    2015-01-01

    Full Text Available A comprehensive study was conducted with the objectives of evaluation of noise exposure in the workplace of bus drivers, and to find attitudes of passengers and drivers. This study consisted of two phases. In the first phase, Noise levels were measured in fifty buses. The evaluation of noise levels in the workplace of bus drivers was performed according to the Iranian legislation`s. Twenty four buses with noise levels above 85 dB (A consider as an "unsafe" workplace. In the second phase, the attitude of 50 male drivers and 500 passengers concerning the annoyance and impact of noise on health were also surveyed. Second phase showed that 70% of drivers and 86.4% of passengers was nervousness from high level noise inside the buses. Eighty four percent drivers and 80% passengers felt noise had affected on their hearing. This study also affirmed that out of every seven drivers, six reported headache.

  15. 49 CFR 571.131 - Standard No. 131; School bus pedestrian safety devices.

    Science.gov (United States)

    2010-10-01

    ... signal arm means a device that can be extended outward from the side of a school bus to provide a signal... tangent to the lower edge of the frame of the passenger window immediately behind the driver's window; and... 200 28 0.5 +30 65 10 S6.2 Lighting Tests. S6.2.1 Color. The procedure shall be done in accordance with...

  16. Case Study of a Healthy Eating Intervention for Swedish Lorry Drivers

    Science.gov (United States)

    Gill, Peter E.; Wijk, Katarina

    2004-01-01

    Professional drivers, i.e. lorry, truck, bus and taxi drivers, have been identified as a particular health risk group. An intervention to study the efficacy of a series of educational programmes, involving improved nutritional balance in meals served, food preparation routines and carrying out personal health profiles on staff, was implemented at…

  17. 78 FR 41187 - Driver Qualifications: Skill Performance Evaluation; Virginia Department of Motor Vehicles...

    Science.gov (United States)

    2013-07-09

    ... Federal Motor Carrier Safety Administration Driver Qualifications: Skill Performance Evaluation; Virginia...), on behalf of truck and bus drivers who are licensed in the Commonwealth of Virginia and need a Skill... identical to that of FMCSA personnel currently administering the Federal SPE program would conduct the skill...

  18. Violence Against Drivers and Conductors in the Road Passenger ...

    African Journals Online (AJOL)

    This cross-sectional study examined the extent, nature and risk factors of workplace violence in the road passenger transport sector in Maputo, the capital city of Mozambique. A random sample of 504 participants was selected from a population of 2 618 registered bus, minibus, and taxi drivers/conductors. The results ...

  19. Comparison of whole-body vibration exposures in buses: effects and interactions of bus and seat design.

    Science.gov (United States)

    Jonsson, Per M G; Rynell, Patrik W; Hagberg, Mats; Johnson, Peter W

    2015-01-01

    Bus and seat design may be important for the drivers' whole-body vibration (WBV). WBV exposures in buses during actual operation were assessed. WBV attenuation performance between an air-suspension seat and a static pedestal seat in low-floor buses was compared; there were no differences in WBV attenuation between the seats. Air-suspension seat performance in a high-floor and low-floor bus was compared. Relative to the pedestal seat with its relatively static, limited travel seat suspension, the air-suspension seat with its dynamic, longer travel suspension provided little additional benefit. Relative to the measurement collected at the bus floor, the air-suspension seat amplified the WBV exposures in the high-floor bus. All WBV exposures were below European Union (EU) daily exposure action values. The EU Vibration Directive only allows the predominant axis of vibration exposure to be evaluated but a tri-axial vector sum exposure may be more representative of the actual health risks. Low back pain is common in bus drivers and studies have shown a relationship with whole body vibration. Relative to a pedestal seat with its limited travel seat suspension, the air-suspension seat with its longer travel suspension provided little additional benefit. Exposures were below European Union daily exposure action values.

  20. Bus and Tag Terminators for IBM system/360

    CERN Multimedia

    Control units were connected to the channels with "Bus and Tag" cable pairs. The bus cables carried the address and data information and the tag cables identified what data was on the bus. There were three general types of bus-and-tag cables produced by IBM.

  1. Driver circuit

    Science.gov (United States)

    Matsumoto, Raymond T. (Inventor); Higashi, Stanley T. (Inventor)

    1976-01-01

    A driver circuit which has low power requirements, a relatively small number of components and provides flexibility in output voltage setting. The driver circuit comprises, essentially, two portions which are selectively activated by the application of input signals. The output signal is determined by which of the two circuit portions is activated. While each of the two circuit portions operates in a manner similar to silicon controlled rectifiers (SCR), the circuit portions are on only when an input signal is supplied thereto.

  2. Bus operator perceptions of safety risks.

    Science.gov (United States)

    2013-07-01

    This paper presents the results of a survey of TriMet bus operators addressing safety risks in their assigned work. Surveyed risk factors : were organized into five categories: vehicle design and condition; route layout; operating conditions; fatigue...

  3. MPBUS: Modular Power bus for Space Vehicles

    OpenAIRE

    Martin Ricardo; Remírez Eduardo; Alonso Javier; Priel Eran; Carapelle Alain; Actis Daniel

    2017-01-01

    Cost reduction in the access to space is leading the space race in the launchers market. Launcher’s companies are looking for a more efficient and economical way to place satellites in orbit. MPBUS project proposes a decentralized power bus distribution with jettisonable smart batteries combined with the use of PLC technology, data over DC, achieving overall weight reduction and harness simplification, both goals in line with Next Generation Launchers (NGL) targets. Two different bus in...

  4. ISET ORS Bus Standards and Prototype

    OpenAIRE

    Sandhoo, Gurpartap; Johnson, Mark; Raynor, William; Hurley, Michael; Stadter, Patrick; Marley, Michael; Apland, Clint; Lee, Robert; Bruzzi, Jonathan; Williams, Bruce; SCHAEFER, EDWARD, JAY; Vernon, Steven; Schwartz, Paul; Moretti, George; Doyne, Thomas

    2007-01-01

    Advancing sound and accepted spacecraft bus standards is the objective of the Office of the Secretary of Defense’s (OSD) Operationally Responsive Space (ORS) Bus Standards Initiative. This effort involves multiple government, industry, and academia participants assembled into an Integrated System Engineering Team (ISET). The core ISET industry team members include AeroAstro, Boeing, Design Net Engineering, General Dynamics Spectrum Astro, Loral, Microcosm, MicroSat, Orbital, Raytheon, and Swa...

  5. Security awareness for public bus transportation : case studies of attacks against the Israeli public bus system.

    Science.gov (United States)

    2012-03-01

    This report presents 16 case studies of attacks planned or carried out against Israeli bus targets, along with statistical data on the number, frequency, and lethality of attacks against bus targets that have taken place in Israel since 1970 and duri...

  6. Dynamic Bus Travel Time Prediction Models on Road with Multiple Bus Routes.

    Science.gov (United States)

    Bai, Cong; Peng, Zhong-Ren; Lu, Qing-Chang; Sun, Jian

    2015-01-01

    Accurate and real-time travel time information for buses can help passengers better plan their trips and minimize waiting times. A dynamic travel time prediction model for buses addressing the cases on road with multiple bus routes is proposed in this paper, based on support vector machines (SVMs) and Kalman filtering-based algorithm. In the proposed model, the well-trained SVM model predicts the baseline bus travel times from the historical bus trip data; the Kalman filtering-based dynamic algorithm can adjust bus travel times with the latest bus operation information and the estimated baseline travel times. The performance of the proposed dynamic model is validated with the real-world data on road with multiple bus routes in Shenzhen, China. The results show that the proposed dynamic model is feasible and applicable for bus travel time prediction and has the best prediction performance among all the five models proposed in the study in terms of prediction accuracy on road with multiple bus routes.

  7. Smart sensors development based on a distributed bus for microsystems applications

    Science.gov (United States)

    Ferrer, Carles; Lorente, Bibiana

    2003-04-01

    Our main objective in this work has been to develop a comunication system applicable between sensors and actuators and the data processing circuitry inside the microsystem in order to develop a flexible and modular architecture. This communication system is based on the use of a dedicated sensor bus composed by only two wires (a bidirectional data line and a clock line for sincronization). The basic philosophy of this development has been to create an IP model with VHDL for the bus driver that can be added to the sensor or the actuator to create an smart device that could be easily plugged with the other componets of the microsystem architecture. This methodology can be applied to a high integrated microsystem based on an extensively use of microelectronics technologies (ASICs, SoCs & MCMs). The reduced number of wires is an extraordinary advatage because produce a minimal interconnection between all the components and as a consequence the size of the microinstrument becomes smaller. The second aspect that we have considered in this development has been to reach a communication protocol that permits to built-up a very simple but robust bus driver interface that minimize the circuit overhead. This interconnection system has been applied to biomedical and aerospatial microsystems applications.

  8. Statistical Analysis of Bus Networks in India.

    Science.gov (United States)

    Chatterjee, Atanu; Manohar, Manju; Ramadurai, Gitakrishnan

    2016-01-01

    In this paper, we model the bus networks of six major Indian cities as graphs in L-space, and evaluate their various statistical properties. While airline and railway networks have been extensively studied, a comprehensive study on the structure and growth of bus networks is lacking. In India, where bus transport plays an important role in day-to-day commutation, it is of significant interest to analyze its topological structure and answer basic questions on its evolution, growth, robustness and resiliency. Although the common feature of small-world property is observed, our analysis reveals a wide spectrum of network topologies arising due to significant variation in the degree-distribution patterns in the networks. We also observe that these networks although, robust and resilient to random attacks are particularly degree-sensitive. Unlike real-world networks, such as Internet, WWW and airline, that are virtual, bus networks are physically constrained. Our findings therefore, throw light on the evolution of such geographically and constrained networks that will help us in designing more efficient bus networks in the future.

  9. Development of an ultra-safe, ultra-low-emissions natural gas-fueled school bus: Phase 2, prototype hardware development

    Energy Technology Data Exchange (ETDEWEB)

    Kubesh, J. [Southwest Research Inst., San Antonio, TX (United States)

    1996-04-01

    This report summarizes work done on Phase 2, ``Prototype Hardware Development`` of Southwest Research Institute (SwRI) Project No. 03-6871, ``Development of an Ultra-Safe, Ultra-Low-Emissions Alternative-Fueled School Bus``. A prototype school bus was designed and constructed. This bus incorporated many new technologies to increase the safety of the bus passengers as well as pedestrians boarding and leaving the bus. These technologies emphasized increased visibility between the bus driver and pedestrians or vehicles, and included the use of high intensity discharge lighting, pedestrian and vehicle detection systems, and remote-mounted cameras. Passenger safety was also stressed, with the application of seat belts and improved emergency exits and lighting. A natural gas-fueled engine was developed for powering the bus. The development process focused primarily on improvements to the lean operation of the engine and control system advancements. The control system development included investigations into alternative control algorithms for steady-state and transient operation, various fuel metering devices, as well as new methods for wastegate control, knock and misfire detection, and catalyst monitoring. Both the vehicle and engine systems represent state-of-the-art technologies. Integration of the vehicle and engine is planned for the next phase of the project, followed by a demonstration test of the overall vehicle system.

  10. Statistical Analysis of Bus Networks in India

    CERN Document Server

    Chatterjee, Atanu; Ramadurai, Gitakrishnan

    2015-01-01

    Through the past decade the field of network science has established itself as a common ground for the cross-fertilization of exciting inter-disciplinary studies which has motivated researchers to model almost every physical system as an interacting network consisting of nodes and links. Although public transport networks such as airline and railway networks have been extensively studied, the status of bus networks still remains in obscurity. In developing countries like India, where bus networks play an important role in day-to-day commutation, it is of significant interest to analyze its topological structure and answer some of the basic questions on its evolution, growth, robustness and resiliency. In this paper, we model the bus networks of major Indian cities as graphs in \\textit{L}-space, and evaluate their various statistical properties using concepts from network science. Our analysis reveals a wide spectrum of network topology with the common underlying feature of small-world property. We observe tha...

  11. The Bus Station Spacing Optimization Based on Game Theory

    Directory of Open Access Journals (Sweden)

    Changjiang Zheng

    2015-01-01

    Full Text Available With the development of city, the problem of traffic is becoming more and more serious. Developing public transportation has become the key to solving this problem in all countries. Based on the existing public transit network, how to improve the bus operation efficiency, and reduce the residents transit trip cost has become a simple and effective way to develop the public transportation. Bus stop spacing is an important factor affecting passengers’ travel time. How to set up bus stop spacing has become the key to reducing passengers’ travel time. According to comprehensive traffic survey, theoretical analysis, and summary of urban public transport characteristics, this paper analyzes the impact of bus stop spacing on passenger in-bus time cost and out-bus time cost and establishes in-bus time and out-bus time model. Finally, the paper gets the balance best station spacing by introducing the game theory.

  12. Request-Centric Wireless Bus Information Management System

    Directory of Open Access Journals (Sweden)

    Ying-Chih Chen

    2016-11-01

    Full Text Available This invention relates to a wireless bus information management system, which includes bus stop and vehicle management subsystems. The management signals are transmittable between bus stops and the vehicle. Based on vehicle management signals, the bus stop management subsystem can obtain information about the bus route identification, the number of unoccupied seats, the intention to stop or not, etc. Similarly, with the bus stop management signals, the vehicle management subsystem can make the decision of stopping. Accordingly, when a passenger wants to get off the vehicle or there are unoccupied seats, the vehicle management subsystem will inform the bus stop management subsystem such that the passengers waiting at the bus stop may flexibly schedule their travel plan. The proposed distributed wireless system is detailed by a prototype implementation and a simulation analysis, which is shown to be feasible and scalable.

  13. Analysis of a diesel-electric hybrid urban bus system

    Science.gov (United States)

    Marr, W. W.; Sekar, R. R.; Ahlheim, M. C.

    A hybrid bus powered by a diesel engine and a battery pack was analyzed over an idealized bus-driving cycle in Chicago. Three hybrid configurations, two parallel and one series, were evaluated. The results indicate that the fuel economy of a hybrid bus, taking into account the regenerative braking, is comparable with that of a conventional diesel bus. Life-cycle costs are slightly higher because of the added weight and cost of the battery.

  14. Speed limiter integrated fatigue analyzer (SLIFA) for speed and fatigue control on diesel engine truck and bus

    Science.gov (United States)

    Wahyudi, Haris; Pranoto, Hadi; Leman, A. M.; Sebayang, Darwin; Baba, I.

    2017-09-01

    Every second, the number of road traffic deaths is increased globally with millions more sustaining severe injuries and living with long-term adverse health consequences. Jakarta alone in year 2015 had recorded 556 people died due to road accidents, approximately reached 6.231 road accident cases. The identified major contributory factors of such unfortunate events are both driver fatigue and over speeding habit especially related to the driving of truck and bus. This paper presents the idea on how to control the electronic system from input fuel system of injection pump and the combustion chamber engine will control the valve solenoid in injection pump which can lock and fuel will stop for moment, and speed limit can be success, by using sensor heart rate we can input reduce speed limit when fatigue detection driver. Integration process this tool can be relevant when Speed Limiter Integrated Fatigue Analyser (SLIFA) trial in the diesel engine for truck and bus, the result of this research Speed Limiter Integrated Fatigue Analyser (SLIFA) able to control speed of diesel engine for truck and bus almost 30km/h, 60km/h, and until 70 km/h. The installation of the sensor heart rate as the input speed limit SLIFA would work when the driver is detected to be in the fatigue condition. We make Speed Limiter Integrated Fatigue Analyser (SLIFA) for control and monitoring system for diesel engine in truck and bus. Speed Limiter Integrated Fatigue Analyser (SLIFA) system can save the historical of the speed record, fatigue, rpm, and body temperature of the driver.

  15. 77 FR 43646 - FY 2012 Discretionary Funding Opportunity; Section 5309 Bus and Bus Facilities and Section 5312...

    Science.gov (United States)

    2012-07-25

    ... Administration's priority of supporting America's veterans and military families, as well as the objectives of... Federal Transit Administration FY 2012 Discretionary Funding Opportunity; Section 5309 Bus and Bus... AGENCY: Federal Transit Administration (FTA), DOT. ACTION: FTA Veterans Transportation and Community...

  16. Security awareness for public bus transportation : case studies of attacks against the Israeli public bus system [research brief].

    Science.gov (United States)

    2012-03-01

    Government regulators and transportation operators of public bus systems are concerned about terrorist attacks. Bus attacks in Israel between late September 2000 and the end of 2006, a period known as the Second Intifada, are particularly well known....

  17. Improvement on Transportation Safety on Bus by Installing A Speed Limiter in Conventional Engine to Reduce Speed Rate

    Directory of Open Access Journals (Sweden)

    Pranoto Hadi

    2016-01-01

    Full Text Available Driving is one of the conditions when the driver should be given special attention to make the motor vehicle in driving way and the driver should be in a good condition. However, the problem is in a certain condition the driver lost their control speed due to their target and minimize the driving time and it led the high potential to accident. Therefore, speed limiter which applied in the bus is urgently needed to reduce the accident and improve their awareness of road safety. Developed speed limiter is completed by fuel cut-off system to prevent the engine and maintain the speed. Limitation of speed be adapted by government regulation. From the results show that the highest and average speed of 136 km/h and 123.5 km/h is observed by bus speed prior to use speed limiter. After speed limiter applied in the bus, the approved maximum speed is 90 km/h. Those data approve that the speed limiter can reduce 83% from the top speed before speed limiter applied.

  18. Technology Validation: Fuel Cell Bus Evaluations

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, Leslie [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2018-01-02

    This presentation describing the FY 2016 accomplishments for the National Renewable Energy Laboratory's Fuel Cell Bus Evaluations project was presented at the U.S. Department of Energy Hydrogen and Fuel Cells Program Annual Merit Review and Peer Evaluation Meeting, June 7, 2016.

  19. FUEL CELL BUS DEMONSTRATION IN MEXICO CITY

    Science.gov (United States)

    The report discusses the performance of a cull-size, zero-emission, Proton Exchange Membrane (PEM) fuel-cell-powered transit bus in the atmospheric environment of Mexico City. To address the air quality problems caused by vehicle emissions in Mexico City, a seminar on clean vehic...

  20. An Experimental Platform for Autonomous Bus Development

    Directory of Open Access Journals (Sweden)

    Héctor Montes

    2017-11-01

    Full Text Available Nowadays, with highly developed instrumentation, sensing and actuation technologies, it is possible to foresee an important advance in the field of autonomous and/or semi-autonomous transportation systems. Intelligent Transport Systems (ITS have been subjected to very active research for many years, and Bus Rapid Transit (BRT is one area of major interest. Among the most promising transport infrastructures, the articulated bus is an interesting, low cost, high occupancy capacity and friendly option. In this paper, an experimental platform for research on the automatic control of an articulated bus is presented. The aim of the platform is to allow full experimentation in real conditions for testing technological developments and control algorithms. The experimental platform consists of a mobile component (a commercial articulated bus fully instrumented and a ground test area composed of asphalt roads inside the Consejo Superior de Investigaciones Científicas (CSIC premises. This paper focuses also on the development of a human machine interface to ease progress in control system evaluation. Some experimental results are presented in order to show the potential of the proposed platform.

  1. Rolling horizon predictions of bus trajectories

    NARCIS (Netherlands)

    Oshyani, M.F.; Cats, O.

    2014-01-01

    Bus travel times are subject to inherent and recurrent uncertainties. A real-time prediction scheme regarding how the transit system evolves will potentially facilitate more adaptive operations as well as more adaptive passengers’ decisions. This scheme should be tractable, sufficiently fast and

  2. Stochastic Bus Dispatching Model untuk Optimalisasi Jumlah Bus Transjakarta Koridor 3

    Directory of Open Access Journals (Sweden)

    Zahedi Zahedi

    2011-12-01

    Full Text Available The increasing number of road user causing traffic jam finds out a way, busway. However, in its implementation, the number of fleet available does not enough to take the passengers. It results in the an amassed of passengers at several bus stops. This leads to passenger dissatisfaction satisfaction which eventually causes Transjakarta users to reuse private cars. Definitely this situation may builds up traffic jams. Stochastic Bus Dispatching Model is used to simulate public transportation that operates regularly. 

  3. Bus 54 -- Where are you? A school bus intelligent information system

    Energy Technology Data Exchange (ETDEWEB)

    Truett, L.F.; Moore, S.; Tonn, B. [Oak Ridge National Lab., TN (United States); Conley, T. [GTE Wireless, Nashville, TN (United States)

    1998-07-01

    Although major accidents involving school buses are rare (only about 0.3% of all fatal crashes since 1986 are classified as school-bus-related), even minor accidents and breakdowns cause a great deal of parental anxiety. The objective of this research is to design an efficient, cost-effective, accurate, and secure system that will track individual school buses and communicate appropriate information to the school system`s central administration unit, to the school transportation administrator, and to parents of children on the bus. The greatest benefit of the proposed information system is that parents and officials can always know the location and condition (these conditions would vary depending on the needs of a particular school system) of the school buses. In case of an accident or mechanical problem, when emergency crews are needed, they can be dispatched almost immediately with a good understanding of the problem and the exact location of the bus. In addition to being able to track the bus while the child is on board, parents will be able to determine the location of their child`s bus prior to its arrival in the morning in order to prevent the child from needing to wait outside in inclement weather. The information available to parents can also be expanded to include maps of limited routes (e.g., snow routes). Basically, the Bus 54 concept consists of a bus component and a central data processing unit. Each bus will be outfitted with a global positioning satellite (GPS) device, a wireless communication device, and wireless data communication service. The central data processing unit will receive and process information from the buses and provide information access to parents and officials via an Internet link.

  4. Desarrollo del control por CAN bus de un carril para la silla de ruedas Asibot

    OpenAIRE

    Gámez Pérez, Roberto

    2012-01-01

    El Trabajo de Fin de Grado trata sobre el diseño e implementación de un paquete de funciones basadas en CAN bus. Dichas funciones se encargan de controlar el motor que va montado en el interior de la base que sustenta al robot ASIBOT. Este robot es desarrollado por el grupo de Robotics Lab del Departamento de Ingeniería de Sistemas y Automática de la Universidad Carlos III de Madrid. La arquitectura de control está implementada en C/C++. Para poder comunicarnos con el driver ISCM8005 debemos ...

  5. Advanced eGovernment Information Service Bus (eGov-Bus

    Directory of Open Access Journals (Sweden)

    2007-01-01

    Full Text Available The eGov-Bus project provides citizens and businesses with improved access to virtual public services, which are based on existing national eGovernment Web services and which support cross-border life events. Requirements and specific rules of these life events are considered, and personalization of user preferences is supported. eGov-Bus is based on adaptable process management technologies, allowing for virtual services which are dynamically combined from existing national eGovernment services. In this way, a comprehensive workflow process is set up, allowing for service-level agreements, an audit trail and explanation of the process to the end user. The eGov-Bus process engine operates on top of a virtual repository, providing a high-level semantic view of information retrieved from heterogeneous information sources, such as eGovernment Web services. Further, eGov-Bus relies on a security framework to ensure all high-level security requirements are met. The eGov-Bus architecture is business oriented, it focuses on Service Oriented Architecture (SOA concepts, asynchronously combining Web services and providing a Service Bus.

  6. Shuttle bus services quality assessment Tangerang Selatan toward smart city

    Science.gov (United States)

    Fassa, Ferdinand; Sitorus, Fredy Jhon Philip; Adikesuma, Tri Nugraha

    2017-11-01

    Around the world, shuttle bus operation played the significant role to accommodate transportation for commuting bus passengers. Shuttle Bus services in cities are provided by various bus agencies with kinds of own specific purposes. For instance, at Tangerang Selatan, Indonesia, it was said that shuttle bus In Trans Bintaro is run and operated by private bus companies hire by Bintaro developer. The aim of this research is to identify factors of satisfaction of shuttle bus service in Kota Tangerang Selatan, Indonesia. Several factors are used to analyze sums of 20 parameters performance indicators of Shuttle Bus. A face to face interview using a questionnaire (N=200) was used to collect data on October and March 2017. Likert and diagram Cartesian were used to model the all the parameters. This research succeeded in finding some categories of Shuttle bus service attributes such as accessibility, comfort, and safety. Users agreed that eight indicators in shuttle bus have the excellent achievement, while three indicators on performance remain low and should receive more attention especially punctuality of the bus.

  7. Energy efficiency of different bus subsystems in Belgrade public transport

    Directory of Open Access Journals (Sweden)

    Mišanović Slobodan M.

    2015-01-01

    Full Text Available Research in this paper comprised experimental determination of energy efficiency of different bus subsystems (diesel bus, trolleybus and fully electric bus on chosen public transport route in Belgrade. Experimental measuring of energy efficiency of each bus type has been done based on the analysis of parameters of vehicle driving cycles between stops. Results of this analysis were basis for development of theoretical simulation model of energy efficiency. The model was latter compared with the results of simulation done by "Solaris bus & Coach" company for the chosen electric bus route. Based on demonstrated simulation, characteristics of electric bus batteries were defined, the method and dynamic of their recharge was suggested, as well as choice for other aggregates for drive system and technical characteristics for the electric buses were suggested.

  8. Integer programming model for optimizing bus timetable using genetic algorithm

    Science.gov (United States)

    Wihartiko, F. D.; Buono, A.; Silalahi, B. P.

    2017-01-01

    Bus timetable gave an information for passengers to ensure the availability of bus services. Timetable optimal condition happened when bus trips frequency could adapt and suit with passenger demand. In the peak time, the number of bus trips would be larger than the off-peak time. If the number of bus trips were more frequent than the optimal condition, it would make a high operating cost for bus operator. Conversely, if the number of trip was less than optimal condition, it would make a bad quality service for passengers. In this paper, the bus timetabling problem would be solved by integer programming model with modified genetic algorithm. Modification was placed in the chromosomes design, initial population recovery technique, chromosomes reconstruction and chromosomes extermination on specific generation. The result of this model gave the optimal solution with accuracy 99.1%.

  9. Partial least square method for modelling ergonomic risks factors on express bus accidents in the east coast of peninsular west Malaysia

    Science.gov (United States)

    Hashim, Yusof bin; Taha, Zahari bin

    2015-02-01

    Public, stake holders and authorities in Malaysian government show great concern towards high numbers of passenger's injuries and passengers fatalities in express bus accident. This paper studies the underlying factors involved in determining ergonomics risk factors towards human error as the reasons in express bus accidents in order to develop an integrated analytical framework. Reliable information about drivers towards bus accident should lead to the design of strategies intended to make the public feel safe in public transport services. In addition there is an analysis of ergonomics risk factors to determine highly ergonomic risk factors which led to accidents. The research was performed in east coast of peninsular Malaysia using variance-based structural equation modeling namely the Partial Least Squares (PLS) regression techniques. A questionnaire survey was carried out at random among 65 express bus drivers operating from the city of Kuantan in Pahang and among 49 express bus drivers operating from the city of Kuala Terengganu in Terengganu to all towns in the east coast of peninsular west Malaysia. The ergonomic risks factors questionnaire is based on demographic information, occupational information, organizational safety climate, ergonomic workplace, physiological factors, stress at workplace, physical fatigue and near miss accidents. The correlation and significant values between latent constructs (near miss accident) were analyzed using SEM SmartPLS, 3M. The finding shows that the correlated ergonomic risks factors (occupational information, t=2.04, stress at workplace, t = 2.81, physiological factor, t=2.08) are significant to physical fatigue and as the mediator to near miss accident at t = 2.14 at p1.96. The results shows that the effects of physical fatigue due to ergonomic risks factors influence the human error as the reasons in express bus accidents.

  10. Partial least square method for modelling ergonomic risks factors on express bus accidents in the east coast of peninsular west Malaysia

    Energy Technology Data Exchange (ETDEWEB)

    Hashim, Yusof bin [Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang, Gambang 26300 Kuantan, Pahang (Malaysia); Taha, Zahari bin [Faculty of Manufacturing Engineering, Malaysia Pahang, 26600 Pekan, Pahang (Malaysia)

    2015-02-03

    Public, stake holders and authorities in Malaysian government show great concern towards high numbers of passenger’s injuries and passengers fatalities in express bus accident. This paper studies the underlying factors involved in determining ergonomics risk factors towards human error as the reasons in express bus accidents in order to develop an integrated analytical framework. Reliable information about drivers towards bus accident should lead to the design of strategies intended to make the public feel safe in public transport services. In addition there is an analysis of ergonomics risk factors to determine highly ergonomic risk factors which led to accidents. The research was performed in east coast of peninsular Malaysia using variance-based structural equation modeling namely the Partial Least Squares (PLS) regression techniques. A questionnaire survey was carried out at random among 65 express bus drivers operating from the city of Kuantan in Pahang and among 49 express bus drivers operating from the city of Kuala Terengganu in Terengganu to all towns in the east coast of peninsular west Malaysia. The ergonomic risks factors questionnaire is based on demographic information, occupational information, organizational safety climate, ergonomic workplace, physiological factors, stress at workplace, physical fatigue and near miss accidents. The correlation and significant values between latent constructs (near miss accident) were analyzed using SEM SmartPLS, 3M. The finding shows that the correlated ergonomic risks factors (occupational information, t=2.04, stress at workplace, t = 2.81, physiological factor, t=2.08) are significant to physical fatigue and as the mediator to near miss accident at t = 2.14 at p<0.05and T-statistics, t>1.96. The results shows that the effects of physical fatigue due to ergonomic risks factors influence the human error as the reasons in express bus accidents.

  11. Neurological symptoms and syndromes in municipal transport drivers

    Directory of Open Access Journals (Sweden)

    Halina Sińczuk-Walczak

    2015-07-01

    Full Text Available Background: The way the municipal transport drivers perform their job contributes to varied burdens linked with the body posture at work, stress, shift work, vibration, noise and exposure to chemical agents. The aim of the study was to assess the condition of the nervous system (NS in municipal transport drivers. Material and Methods: The study covered 42 men, aged 43.4 years (standard deviation (SD: 8.3, employed as bus drivers in the municipal transport enterprise. The duration of employment was 11.8 years on average (SD: 8.6. The condition of the nervous system was assessed on the basis of clinical neurological examinations. Results: Chronic lumbosacral syndrome was found in 54.8% of the subjects. A significant relationship between the incidence of lumbosacral syndrome and the duration of employment (p = 0.032 was observed; significantly higher in drivers employed for 11–15 years (90.9% in comparison to the remaining groups. Nervous system functional disorders were niejedcharacterized by the increased emotional irritability (47.6%, sleep disorders manifested by excessive sleepiness (33.3% or insomnia (28.6% and headaches (3%, mostly tension headaches. Excessive daytime sleepiness was significantly age-dependent (p = 0.038. Conclusions: The evidenced NS disorders indicate the need to undertake preventive measures tailored for the occupational group of bus drivers. Med Pr 2015;66(3:333–341

  12. Driver Cognitive Distraction Detection Using Driving Performance Measures

    Directory of Open Access Journals (Sweden)

    Lisheng Jin

    2012-01-01

    Full Text Available Driver cognitive distraction is a hazard state, which can easily lead to traffic accidents. This study focuses on detecting the driver cognitive distraction state based on driving performance measures. Characteristic parameters could be directly extracted from Controller Area Network-(CAN-Bus data, without depending on other sensors, which improves real-time and robustness performance. Three cognitive distraction states (no cognitive distraction, low cognitive distraction, and high cognitive distraction were defined using different secondary tasks. NLModel, NHModel, LHModel, and NLHModel were developed using SVMs according to different states. The developed system shows promising results, which can correctly classify the driver’s states in approximately 74%. Although the sensitivity for these models is low, it is acceptable because in this situation the driver could control the car sufficiently. Thus, driving performance measures could be used alone to detect driver cognitive state.

  13. Exposure Assessment of Diesel Bus Emissions

    Directory of Open Access Journals (Sweden)

    Werner Hofmann

    2006-12-01

    Full Text Available The goal of this study was to measure ultrafine particle concentrations with diameters less than 1 μm emitted by diesel buses and to assess resulting human exposure levels. The study was conducted at the Woolloongabba Busway station in Brisbane, Australia in the winter months of 2002 during which temperature inversions frequently occurred. Most buses that utilize the station are fuelled by diesel, the exhaust of which contains a significant quantity of particle matter. Passengers waiting at the station are exposed to these particles emitted from the buses. During the course of this study, passenger census was conducted, based on video surveillance, yielding person-by-person waiting time data. Furthermore, a bus census revealed accurate information about the total number of diesel versus Compressed Natural Gas (CNG powered buses. Background (outside of the bus station and platform measurements of ultrafine particulate number size distributions were made to determine ambient aerosol concentrations. Particle number exposure concentration ranges from 10 and 40 to 60% of bus related exhaust fumes. This changes dramatically when considering the particle mass exposure concentration, where most passengers are exposed to about 50 to 80% of exhaust fumes. The obtained data can be very significant for comparison with similar work of this type because it is shown in previous studies that exhaust emissions causes cancer in laboratory animals. It was assumed that significant differences between platform and background distributions were due to bus emissions which, combined with passenger waiting times, yielded an estimate of passenger exposure to ultrafine particles from diesel buses. From an exposure point of view, the Busway station analyzed resembles a street canyon. Although the detected exhaust particle concentration at the outbound platform is found to be in the picogram range, exposure increases with the time passengers spend on the platform

  14. Terminals for Suburb Bus Transport in Bratislava

    Science.gov (United States)

    Schlosser, Tibor; Schlosser, Peter; Cápayová, Silvia; Hodáková, Dominika

    2017-10-01

    The main objective of this article is to describe the strategy for development of the public transport terminals in the city of Bratislava, Capital of Slovak Republic. The reason goes from the private operator Slovak Lines, who operates the suburb bus transport in the agglomeration of the city. For this operator was created a transport model, while placing emphasis on optimizing the compliance of suburban public transport with urban public transport in the city of Bratislava and evaluating the significance of the new Bus Station to be constructed at Mlynské Nivy – in a new down town centre of the city. The main issue is to ensure the best available offer of public transport (PT) to passengers in the Bratislava agglomeration. The subject of the study was oriented to specify and propose changes in the transport infrastructure and integrated public transport organisation on the area of the city in terms of the significant position of the new Mlynské Nivy Bus Station (MN BS), which is under preparation with realization in the year 2017.

  15. Brazilian hybrid electric fuel cell bus

    Energy Technology Data Exchange (ETDEWEB)

    Miranda, P.E.V.; Carreira, E.S. [Coppe-Federal Univ. of Rio de Janeiro (Brazil). Hydrogen Lab.

    2010-07-01

    The first prototype of a hybrid electric fuel cell bus developed with Brazilian technology is unveiled. It is a 12 m urban-type, low-floor, air-conditioned bus that possesses three doors, air suspension, 29 seats and reversible wheelchair site. The bus body was built based on a double-deck type monoblock vehicle that is able to sustain important load on its roof. This allowed positioning of the type 3 hydrogen tanks and the low weight traction batteries on the roof of the vehicles without dynamic stabilization problems. A novel hybrid energy configuration was designed in such a way that the low-power (77 kWe) fuel cell works on steady-state operation mode, not responding directly to the traction motor load demand. The rate of kinetic energy regeneration upon breaking was optimized by the use of an electric hybrid system with predominance of batteries and also by utilizing supercapacitors. The electric-electronic devices and the security control softwares for the auxiliary and traction systems were developed in-house. The innovative hybrid-electric traction system configuration led to the possibility to decrease the fuel cell power, with positive impact on weight and system volume reduction, as well as to significantly decrease the hydrogen consumption. (orig.)

  16. Research of intelligent bus coin box

    Science.gov (United States)

    Xin, Shihao

    2017-03-01

    In the energy-saving emission reduction of the social context, in response to low-carbon travel, buses become the majority of people choose. We have designed this sorting machine for the present situation that the bus company has received a large amount of mixed zero coins and employed a large amount of manpower to sort out and lower the efficiency. Its function is to separate the coins and notes mixed, and the coins sort storage, the display shows the value of the received coins, so that the whole mechanized inventory classification, reduce the cost of clearing up and improve the efficiency of zero cash recycling, use Simple mechanical principles for classification, to be efficient, accurate and practical. Really meet the current city bus companies, commerce and banking and other industries in order to zero notes, zero coins in the actual demand. The size and specification of this machine are designed according to the size of the bus coin box. It is suitable for almost all buses. It can be installed in the coin box directly, real-time sorting and real-time counting. The difficulty of clearing change.

  17. 77 FR 31422 - Commercial Driver's License (CDL) Standards; Daimler Trucks North America (Daimler) Exemption...

    Science.gov (United States)

    2012-05-25

    ... Federal Motor Carrier Safety Administration Commercial Driver's License (CDL) Standards; Daimler Trucks... announces its decision to grant Daimler Trucks North America's (Daimler) application for an exemption for... of Bus and Truck Standards and Operations, MC-PSD, Federal Motor Carrier Safety Administration, 1200...

  18. 77 FR 13684 - Commercial Driver's License Standards: Application for Exemption; Daimler Trucks North America...

    Science.gov (United States)

    2012-03-07

    ... Exemption; Daimler Trucks North America (Daimler) AGENCY: Federal Motor Carrier Safety Administration (FMCSA... Daimler Trucks North America (Daimler) has applied for two drivers of commercial motor vehicles (CMVs) to... Operations Division; Office of Bus and Truck Standards and Operations; Telephone: 202-366-4325. Email: MCPSD...

  19. [Investigation of Legionella pneumophila seropositivity in the professional long distance drivers as a risky occupation].

    Science.gov (United States)

    Polat, Yusuf; Ergin, Cağri; Kaleli, Ilknur; Pinar, Ahmet

    2007-04-01

    Contaminated water sources, reservoirs and systems such as evaporative condensers of air-conditioners are known to be the main transmission routes of Legionella spp. which are ubiquitous aquatic bacteria. By virtue of this point the aim of this study was to investigate the rate of Legionella pneumophila seropositivity in a profession considered as risky due to the direct and prolonged exposure to air-conditioning and air-circulating systems. For this purpose, in the period of February-August 2004 a total of 79 male subjects (63 were bus drivers and 16 were driver assistants) who were continously travelling to two different route (South part as hot climate and Middle/North parts as cold climate of Turkey) from Denizli province coach station (a province located in internal Aegian where accepted as crossroads), were included to the study. The mean age and mean working duration of bus drivers were 43.0 +/- 1.1 years and 20.0 +/- 1.1 years, respectively, while these values were 22.5 +/- 0.9 years and 4.0 +/- 0.6 years, respectively, for the drivers' assistants. The serum samples collected from the subjects were screened by a commercial indirect immunofluorescence method (Euroimmun, Germany) using L. pneumophila serogrup 1-14 antigens for the presence of specific antibodies. Additionally, air-conditioners' moisture exhaust samples of the busses in which seropositive subjects travelling with have been examined by culture and 5S rRNA gene targeted polymerase chain reaction (PCR) methods, for the presence of Legionella spp. The overall L. pneumophila seropositivity rate was detected as 15.2% (12/79). This rate was 19% (12/63) for bus drivers while all of the drivers' assistants were found seronegative. The seropositivity rate was found statistically higher in the personnel who were travelling to the hot climates (10/36, 27.8%) than those who travel to cold climates (2/43, 4.6%), (p distance bus drivers were chronically exposed to this pathogen and this may be considered as

  20. Design of Mine Locomotive System Based on CAN Bus

    OpenAIRE

    Li Yuanhong; Zhang Quanzhu; Zhang Wenshan

    2017-01-01

    Based on CAN bus, this paper studies the system control and management system of locomotive in mine, analyzes the working principle of locomotive system, gives the CAN bus scheme, hardware circuit design and CAN communication protocol, and implements long-distance, high-reliability communication function and remote monitoring function. Experiments show that the auxiliary system based on CAN bus control easier, operation more secure, as well as improving the control performance and service lif...

  1. Design of Mine Locomotive System Based on CAN Bus

    Directory of Open Access Journals (Sweden)

    Li Yuanhong

    2017-01-01

    Full Text Available Based on CAN bus, this paper studies the system control and management system of locomotive in mine, analyzes the working principle of locomotive system, gives the CAN bus scheme, hardware circuit design and CAN communication protocol, and implements long-distance, high-reliability communication function and remote monitoring function. Experiments show that the auxiliary system based on CAN bus control easier, operation more secure, as well as improving the control performance and service life of the electric locomotive.

  2. MODELLING AND ANALYSIS OF THE BUS PRIORITY IMPLEMENTATION

    Directory of Open Access Journals (Sweden)

    Lydia Hidayati

    2013-05-01

    Full Text Available Bus is expected to play an important role in providing a reliable travel in congested conditions. Therefore, it has been widely studied to minimize the travel time and the delay of the bus by proposing bus priority scheme to increase the attractiveness of public transport against private vehicles. Signal timing optimization combined with the bus priority scheme are discussed in this research as the alternatives to improve the intersection performances. Further, identifying the effects of these alternatives towards the general vehicles and public transport system performances were the aims of this research as well. As the result of this research, bus advance area with pre-signal method is able to reduce the travel time and delay of the bus for routes 2A and 3A by 11%, 23% and 14% , 0% respectively and able to reduce travel time, delay, and queue of vehicles by 25%, 26%, 7% consecutively. Thus bus advance area with pre-signal method is proposed as the best alternative due to its impact to reduce the bus travel times and delay without degrading the other vehicles performance. Keywords: bus priority, optimizing signal timing, Aimsun simulation, travel time-delay-queue.

  3. Model Passengers’ Travel Time for Conventional Bus Stop

    Directory of Open Access Journals (Sweden)

    Guangzhao Xin

    2014-01-01

    Full Text Available Limited number of berths can result in a subsequent bus stopping at the upstream of a bus stop when all berths are occupied. When this traffic phenomenon occurs, passengers waiting on the platform usually prefer walking to the stopped bus, which leads to additional walking time before boarding the bus. Therefore, passengers’ travel time consumed at a bus stop is divided into waiting time, additional walking time, and boarding time. This paper proposed a mathematical model for analyzing passengers’ travel time at conventional bus stop based on theory of stochastic service system. Field-measured and simulated data were designated to demonstrate the effectiveness of the proposed model. By analyzing the results, conclusion was conducted that short headway can reduce passengers’ waiting time at bus stop. Meanwhile, the theoretical analysis explained the inefficiency of bus stops with more than three berths from the perspective of passengers’ additional walking time. Additional walking time will increase in a large scale when the number of berths at a bus stop exceedsthe threshold of three.

  4. Driver Education Saves Gas.

    Science.gov (United States)

    American Automobile Association, Falls Church, VA. Traffic Engineering and Safety Dept.

    The argument that driver education should be dropped because driver education cars use gas is shortsighted. High school driver education is an excellent vehicle for teaching concepts of energy conservation. A small investment in fuel now can result in major savings of gasoline over a student's lifetime. In addition good driver education courses…

  5. 77 FR 6178 - FY 2012 Discretionary Funding Opportunities: Bus and Bus Facilities Programs (State of Good...

    Science.gov (United States)

    2012-02-07

    ... transportation, environmental protection, and housing investments. Bus Livability will invest in projects that... characteristics of all communities by investing in healthy, safe and walkable neighborhoods--rural, urban or... guidelines. The project improves energy efficiency or reduces energy consumption/green house gas emissions...

  6. 76 FR 68819 - State of Good Repair Bus and Bus Facilities Discretionary Program Funds

    Science.gov (United States)

    2011-11-07

    ...--New York, Administrator, Region 7--Kansas One Bowling Green, Room 429, New City, MO, 901 Locust Street... transportation bus fleet, infrastructure, and equipment in a state of good repair. Project Implementation..., Region 6--Ft. Kendall Square, 55 Broadway, Suite Worth, 819 Taylor Street, Room 920, Cambridge, MA 02142...

  7. Extracting potential bus lines of Customized City Bus Service based on public transport big data

    Science.gov (United States)

    Ren, Yibin; Chen, Ge; Han, Yong; Zheng, Huangcheng

    2016-11-01

    Customized City Bus Service (CCBS) can reduce the traffic congestion and environmental pollution that caused by the increasing in private cars, effectively. This study aims to extract the potential bus lines and each line's passenger density of CCBS by mining the public transport big data. The datasets used in this study are mainly Smart Card Data (SCD) and bus GPS data of Qingdao, China, from October 11th and November 7th 2015. Firstly, we compute the temporal-origin-destination (TOD) of passengers by mining SCD and bus GPS data. Compared with the traditional OD, TOD not only has the spatial location, but also contains the trip's boarding time. Secondly, based on the traditional DBSCAN algorithm, we put forwards an algorithm, named TOD-DBSCAN, combined with the spatial-temporal features of TOD.TOD-DBSCAN is used to cluster the TOD trajectories in peak hours of all working days. Then, we define two variables P and N to describe the possibility and passenger destiny of a potential CCBS line. P is the probability of the CCBS line. And N represents the potential passenger destiny of the line. Lastly, we visualize the potential CCBS lines extracted by our procedure on the map and analyse relationship between potential CCBS lines and the urban spatial structure.

  8. Managing Student Behavior on the School Bus: A Key to Bus Safety

    Science.gov (United States)

    American Federation of Teachers (NJ), 2007

    2007-01-01

    School buses are the safest form of mass transit in America. Every day, school buses travel through congested city traffic and on isolated country roads in all types of weather, safely transporting millions of children to and from school and school-related activities. Federal and state standards for school bus construction and maintenance and…

  9. Monitoreo del sueño en conductores de ómnibus y camiones: factor relevante a considerar para la renovación de la licencia de conducir Sleep monitoring in bus and truck drivers: relevant factor to consider for the renewal of the driving license

    Directory of Open Access Journals (Sweden)

    Jorge Rey de Castro

    2010-06-01

    Full Text Available La información publicada indica que hasta un tercio de los accidentes de tránsito son producidos por la somnolencia del conductor. El síndrome de apnea-hipopnea del sueño (SAHS es una enfermedad orgánica que causa somnolencia. Puede diagnosticarse por medio de un registro del sueño y controlarse con modalidades terapéuticas distintas y de diferente complejidad según su gravedad, lo que determina el costo final del manejo del SAHS. En los pacientes que emplean disciplinadamente la terapia, los resultados son muy buenos y logran controlar la somnolencia, mejoran la calidad de vida del afectado, protegen su salud y disminuyen ostensiblemente el riesgo de accidentes durante la conducción debido a somnolencia. Ponemos en consideración de las autoridades responsables la aplicación de estas pruebas en choferes con sospecha de SAHS que renuevan licencias de conducir de tipo A-II y A-III.The available information indicates that up to one third of the road traffic accidents are produced by the driver’s sleepiness. Sleep apnea-hypopnea syndrome (SAHS is an organic disease that causes sleepiness. It can be diagnosed by a sleep register and can be controlled by different therapeutic means, varying their complexity according to its severity, which determines the final cost of the management of SAHS. In patients using the therapy thoroughly, the results are very good and achieve to control the sleepiness, improve the quality of life of the affected subject, protect his health and markedly decrease the risk of accidents due to sleepiness during driving. We put into consideration of the respective authorities the application of these tests in drivers suspected of having SAHS who renew their driving licenses type A-II and A-III.

  10. Simulation Model of Bus Rapid Transit

    Directory of Open Access Journals (Sweden)

    Gunawan Fergyanto E.

    2014-03-01

    Full Text Available Bus rapid transit system is modern solution for mass transportation system. The system, in comparison to the rail-based transportation system, is significantly cheaper and requires shorter development time, but lower performance. The BRT system performance strongly depends on variables related to station design and infrastructure. A numerical model offers an effective and efficient means to evaluate the system performance. This article offers a detailed numerical model on the basis of the discrete-event approach and demonstrates its application.

  11. Oracle Service Bus 11g Development Cookbook

    CERN Document Server

    Schmutz, Guido; van Zoggel, Jan

    2012-01-01

    This cookbook is full of immediately useable recipes showing you how to develop service and message-oriented (integration) applications on the Oracle Service Bus. In addition to its cookbook style, which ensures the solutions are presented in a clear step-by-step manner, the explanations go into great detail, which makes it good learning material for everyone who has experience in OSB and wants to improve. Most of the recipes are designed in such a way that each recipe is presented as a separate, standalone entity and reading of prior recipes is not required. The finished solution of each reci

  12. Effect of stoppage time on motion of a bus through a sequence of signals

    Science.gov (United States)

    Nagatani, Takashi

    2017-01-01

    We study the dynamic motion of a bus moving through the series of traffic signals where the bus stops at bus stops during a time. The dynamic state of the bus depends highly on both stoppage time at the bus stop and cycle time of the signal. It is found that the bus motion has two kinds of dynamic states: the one is the normal state and the other is the offset state. In the normal state, the bus stops normally at both bus stops and signals. In the offset state, the bus passes timely through the signal sometimes and the stoppage time at the bus stop is offset against the stopping time at the signal. If the bus speed has the same value as the car speed, the travel time of the bus is consistent with that of the car in the offset state. The region map (phase diagram) is shown for two kinds of dynamic states: the normal and offset states.

  13. A Conceptual Approach for Optimising Bus Stop Spacing

    Science.gov (United States)

    Johar, Amita; Jain, S. S.; Garg, P. k.

    2017-06-01

    An efficient public transportation system is essential of any country. The growth, development and shape of the urban areas are mainly due to availability of good transportation (Shah et al. in Inst Town Plan India J 5(3):50-59, 1). In developing countries, like India, travel by local bus in a city is very common. The accidents, congestion, pollution and appropriate location of bus stops are the major problems arising in metropolitan cities. Among all the metropolitan cities in India, Delhi has highest percentage of growth of population and vehicles. Therefore, it is important to adopt efficient and effective ways to improve mobility in different metropolitan cities in order to overcome the problem and to reduce the number of private vehicles on the road. The primary objective of this paper is to present a methodology for developing a model for optimum bus stop spacing (OBSS). It describes the evaluation of existing urban bus route, data collection, development of model for optimizing urban bus route and application of model. In this work, the bus passenger generalized cost method is used to optimize the spacing between bus stops. For the development of model, a computer program is required to be written. The applicability of the model has been evaluated by taking the data of urban bus route of Delhi Transport Corporation (DTC) in Excel sheet in first phase. Later on, it is proposed to develop a programming in C++ language. The developed model is expected to be useful to transport planner for rational design of the spacing of bus stops to save travel time and to generalize operating cost. After analysis it is found that spacing between the bus stop comes out to be between 250 and 500 m. The Proposed Spacing of bus stops is done considering the points that they don't come nearer to metro/rail station, entry or exit of flyover and near traffic signal.

  14. Modeling school bus seat belt usage: Nested and mixed logit approaches.

    Science.gov (United States)

    Mehta, Gaurav; Lou, Yingyan

    2013-03-01

    School bus seat belt usage has been of great interest to the school transportation community. Understanding factors that influence students' decisions about wearing seat belts or not is important in determining the most cost-effective ways to improve belt usage rate, and thus the seat belt safety benefits. This paper presents a rigorous empirical analysis on data from Alabama School Bus Pilot Project using discrete choice modeling framework. In order to collect relevant information on individual student-trips, a new data collection protocol is adopted. Three choice alternatives are considered in the study: wearing, not wearing, and improperly wearing seat belts. A student's choice probabilities of these alternatives are modeled as functions of the student's characteristics and trip attributes. The coefficients of the variables in the functions are estimated first using standard multinomial logit model. Moreover, to account for potential correlations among the three choice alternatives and individual-level preference and response heterogeneity among users, nested and mixed logit models are employed in the investigation. Eight significant influence factors are identified by the final models. Their relative impacts are also quantified. The factors include age, gender and the home county of a student, a student's trip length, time of day, seat location, presence and active involvement of bus aide, and two levels of bus driver involvement. The impact of the seat location on students' seat belt usage is revealed for the first time by this study. Both hypotheses that some of the choice alternatives are correlated and that individual-level heterogeneity exists are tested statistically significant. In view of this, the nested and the mixed logit model are recommended over the standard multinomial logit model to describe and predict students' seat belt usage behaviors. The final nested logit model uncovers a correlation between improper wearing and not wearing, indicating

  15. Djungle power. A more remote AC bus

    Energy Technology Data Exchange (ETDEWEB)

    Boehnke, Heinz W. [Technosol, Jork (Germany)

    2010-07-01

    The Dzanga-Sangha Reserve in the Central African Republic is probably one of the world's most remote protected rainforest areas, much to the benefit of the rare species of lowland gorilla, forest elephant and local pygmy population Ba'Aka. The park is co-managed by the ''WWF-World Wide Fund for Nature'' with sponsoring from the German Regenwald-Stiftung. In 2008 wwf decided to switch from the old, failing generator supply to a solar hybrid mini-grid, along with stringent measures of energy conservation and management. After a careful energy audit Technosol designed an AC-bus system with a 22 kWp PV generator which should overcome the dependency on the old generators and their fuel demands. For 15 buildings, an entirely new distribution network was installed, state of the art energy saving devices introduced and an energy metering system deviced. The installation is operating since August 2009. In such remote locations, the reliability of the AC-bus over other generator-based solutions will be demonstrated and with the support of international organisations like the wwf the practical application of solar hybrid supply becomes a landmark of sustainable energy concepts. (orig.)

  16. Towards formal verification of ToolBus scripts

    NARCIS (Netherlands)

    Fokkink, W.; Klint, P.; Lisser, B.; Usenko, Y.S.

    2008-01-01

    ToolBus allows one to connect tools via a software bus. Programming is done using the scripting language Tscript, which is based on the process algebra ACP. Tscript was originally designed to enable formal verification, but this option has so far not been explored in any detail. We present a method

  17. Connecticut Transit (CTTRANSIT) Fuel Cell Transit Bus: Preliminary Evaluation Results

    Energy Technology Data Exchange (ETDEWEB)

    Chandler, K.; Eudy, L.

    2008-10-01

    This report provides preliminary results from a National Renewable Energy Laboratory evaluation of a protoptye fuel cell transit bus operating at Connecticut Transit in Hartford. Included are descriptions of the planned fuel cell bus demonstration and equipment; early results and agency experience are also provided.

  18. Solar Telescope Control with the CAN-Bus

    Science.gov (United States)

    Pettauer, T. V.

    The real time behavior, error handling and its simplicity makes CAN a preferable bus protocol to interconnect the various modules of a tower telescope. A schematic description of the control bus for the Kanzelhöhe Vakuum Telescope is given.

  19. Application of CAN-bus Network in Intelligent parking

    Science.gov (United States)

    Jianjun, WU; Juan, Hu

    Convenient life makes intelligent parking every- where. This paper describes how to connect the various separate modern terminal of intelligent parking with CAN-bus network, and the competitive advantage of the system by using the CAN-bus network. From a technical point of view, this paper describes the development trend of intelligent parking in next few years.

  20. Connecticut nutmeg fuel cell bus project : first analysis report.

    Science.gov (United States)

    2012-07-01

    This report summarizes the experience and early results from a fuel cell bus demonstration funded by the Federal Transit Administra-tion (FTA) under the National Fuel Cell Bus Program (NFCBP). A team led by the Northeast Advanced Vehicle Consortium a...

  1. Bus-based best-practice and urban transport emissions

    Science.gov (United States)

    Enoch, Marcus Paul

    In Britain over recent years, transport has risen to the very top of the political agenda, partly because it is the fastest growing source of urban emissions. One politically attractive solution to this rapidly worsening problem, is 'improving public transport'. This thesis examines how the bus-the most widespread form of public transport-could be improved, and at how much these improvements would contribute to solving the emissions problem. The project was studied in two inter-related parts. The first part aimed to determine the factors necessary in forming the 'best possible' bus-based transport system by identifying and analysing a number of 'best-practice' bus systems in Europe and North America, using a case study approach. The second part then sought to quantify the effect on travel patterns and emissions that implementing this best possible bus-based transport system would have. This was done by modelling a series of possible scenarios with the START strategic transport model, and a modified version of the JET emissions inventory model. The City of Leicester was used as a modelling base. The study found that bus systems contributed most to reducing urban emissions where the needs of the bus passenger were made paramount, and where bus operators worked together with local government, local businesses etc. Even where these factors existed however, the effect of bus-based transport policies on levels of pollutants was found to be significant only when applied together with strong car restraint measures.

  2. Bus Lifecycle Cost Model for Federal Land Management Agencies.

    Science.gov (United States)

    2011-09-30

    The Bus Lifecycle Cost Model is a spreadsheet-based planning tool that estimates capital, operating, and maintenance costs for various bus types over the full lifecycle of the vehicle. The model is based on a number of operating characteristics, incl...

  3. 32 CFR 935.138 - Motor bus operation.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false Motor bus operation. 935.138 Section 935.138 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE TERRITORIAL AND INSULAR REGULATIONS WAKE ISLAND CODE Motor Vehicle Code § 935.138 Motor bus operation. Each person operating a motor...

  4. Network Analysis of Urban Traffic with Big Bus Data

    CERN Document Server

    Zhao, Kai

    2016-01-01

    Urban traffic analysis is crucial for traffic forecasting systems, urban planning and, more recently, various mobile and network applications. In this paper, we analyse urban traffic with network and statistical methods. Our analysis is based on one big bus dataset containing 45 million bus arrival samples in Helsinki. We mainly address following questions: 1. How can we identify the areas that cause most of the traffic in the city? 2. Why there is a urban traffic? Is bus traffic a key cause of the urban traffic? 3. How can we improve the urban traffic systems? To answer these questions, first, the betweenness is used to identify the most import areas that cause most traffics. Second, we find that bus traffic is not an important cause of urban traffic using statistical methods. We differentiate the urban traffic and the bus traffic in a city. We use bus delay as an identification of the urban traffic, and the number of bus as an identification of the bus traffic. Third, we give our solutions on how to improve...

  5. A series of small scientific satellite with flexible standard bus

    Science.gov (United States)

    Saito, Hirobumi; Sawai, Syujiro; Sakai, Shin-ichiro; Fukuda, Seisuke; Kitade, Kenji

    2009-11-01

    Japan Aerospace Exploration Agency has a plan to develop the small satellite standard bus for various scientific missions and disaster monitoring missions. The satellite bus is a class of 250-400 kg mass with three-axis control capability of 0.02∘ accuracy. The science missions include X-ray astronomy missions, planetary telescope missions, and magnetosphere atmosphere missions. In order to adapt the wide range of mission requirements, the satellite bus has to be provided with flexibility. The concepts of modularization, reusability, and product line are applied to the standard bus system. This paper describes the characteristics of the small satellite standard bus which will be firstly launched in 2011.

  6. Research on the Coordinated Design of Bus and Taxi Station

    Directory of Open Access Journals (Sweden)

    Jiangfeng Xi

    2015-01-01

    Full Text Available Rises in the number of transit buses, bus routes, and overall traffic volume in China’s cities, coupled with interference from other transport modes, such as taxis loading and unloading passengers nearby, have led to increasing traffic delays at bus stops, which is considered one of the factors degrading service levels and traffic operations on urban roadways. This paper studies traffic characteristics at bus stops, investigates variations in delay from different types or designs of bus stops, and analyzes the impact of it on traffic capacity, the purpose of which is to propose a solution to predicting the feasibility of an integrated design of bus stops and taxi stands with the help of mathematical models and based on the objectives of optimal traffic operations and passenger transfer.

  7. Genetic Algorithm for Multiple Bus Line Coordination on Urban Arterial

    Directory of Open Access Journals (Sweden)

    Zhen Yang

    2015-01-01

    Full Text Available Bus travel time on road section is defined and analyzed with the effect of multiple bus lines. An analytical model is formulated to calculate the total red time a bus encounters when travelling along the arterial. Genetic algorithm is used to optimize the offset scheme of traffic signals to minimize the total red time that all bus lines encounter in two directions of the arterial. The model and algorithm are applied to the major part of Zhongshan North Street in the city of Nanjing. The results show that the methods in this paper can reduce total red time of all the bus lines by 31.9% on the object arterial and thus improve the traffic efficiency of the whole arterial and promote public transport priority.

  8. Work stress related lipid disorders and arterial hypertension in professional drivers - a cross-sectional study.

    Science.gov (United States)

    Djindjić, Natasa; Jovanović, Jovica; Djindjić, Boris; Jovanović, Milan; Pesić, Milica; Jovanović, Jovana J

    2013-06-01

    Occupational stress is a term used to define ongoing stress that is related to the workplace. The study was conducted to determine association of occupational stress index (OSI) and its aspects with arterial hypertension and lipid disorders using data from a cross-sectional survey of male professional drivers. The cross-sectional study was performed in 439 professional drivers divided into groups (city- and intercity bus drivers, truck and taxi drivers). The OSI and OSI aspects (high demands, strictness, underload, extrinsic time pressure, noxious exposure, avoidance and conflict) were calculated using the standardized questionnaire. Determination of serum lipids, blood pressure (BP) and cardiovascular risk factors were done. A significant difference in prevalence of diagnosed hypertension and dyslipidemia was found along with a difference in total OSI and OSI aspects among examined subgroups of drivers. A total OSI was highest in city, high in intercity bus drivers, and the lowest one in truck and taxi drivers (82.79 +/- 3.5, 81.28 +/- 3.7, 73.75 +/- 3.5, 71.61 +/- 4.4, respectively; p stress and coronary heart disease. Regular periodical examinations and workplace interventions aimed to decrease total OSI and underload are important aspects in primary prevention and additional reduction of cardiovascular risk.

  9. How to Find a Comfortable Bus Route - Towards Personalized Information Recommendation Services

    Directory of Open Access Journals (Sweden)

    Danhuai Guo

    2015-05-01

    Full Text Available With the generation of massive data from bus IC cards, how to effectively and efficiently recommend comfortable bus routes to bus passengers is a challenging and complex task. In this paper, waiting time, crowded time, and driving time between different bus stations on different bus routes at different times of the day are calculated from bus IC cards data history. Then, a multi-objective program with various constraints is suggested to recommend comfortable bus routes for bus passengers, and a genetic algorithm is developed to search for expected solutions. The proposed method is implemented using bus IC cards data from Chongqing, China and will be a promising tool for bus passengers when choosing comfortable bus routes.

  10. A Self-Adjusting Method to Resist Bus Bunching Based on Boarding Limits

    Directory of Open Access Journals (Sweden)

    Shuzhi Zhao

    2016-01-01

    Full Text Available Bus bunching is one of the most serious problems of urban bus systems. Bus bunching increases waiting and travel time of passengers. Many bus systems use schedules to reach equal headways. Compared to the idea of schedules and the target headway introduced later, we propose a new method to improve the efficiency of a bus system and avoid bus bunching by boarding limits. Our solution can be effectively implemented when buses cannot travel as planned because of bad road conditions and dynamic demands at bus stops. Besides, using our method, bus headways reach the state with equal headways dynamically and spontaneously without drivers’ explicit intervention. Moreover, the method can improve the level of the bus service and reduce total travel time of passengers. We verify our method using an ideal bus route and a real bus route, both showing the success of the proposed method.

  11. Bus industry market study. Report -- Task 3.2: Fuel cell/battery powered bus system

    Energy Technology Data Exchange (ETDEWEB)

    Zalbowitz, M.

    1992-06-02

    In support of the commercialization of fuel cells for transportation, Georgetown University, as a part of the DOE/DOT Fuel Cell Transit Bus Program, conducted a market study to determine the inventory of passenger buses in service as of December, 1991, the number of buses delivered in 1991 and an estimate of the number of buses to be delivered in 1992. Short term and long term market projections of deliveries were also made. Data was collected according to type of bus and the field was divided into the following categories which are defined in the report: transit buses, school buses, commercial non-transit buses, and intercity buses. The findings of this study presented with various tables of data collected from identified sources as well as narrative analysis based upon interviews conducted during the survey.

  12. Organizing a bus depot – selected aspects

    Directory of Open Access Journals (Sweden)

    Jerzy PAWLICKI

    2012-01-01

    Full Text Available Urban transportation problems are particularly noticeable within cities of over 100 thousand inhabitants. In these cities buses are a primary means of transport, but lack of low-floor and poor interior design does not encourage passengers to use them. However, the qualities that give the most negative feedback on the public transpiration are the technical condition of buses, excessive noise and exhaust emission. Technical backsides of the bus depots that constantly maintain the technical readiness of the required number of vehicles play an important role to ensure high quality standards. New European Union legislation is very helpful in such. New laws and regulations deal with the safety issues and environmental protection matters, to which the urban transportation depots must be strictly adjusted. This article refers to these documents and presents depot technical stations, which equipment needs to be upgraded in the first place.

  13. Bus bar electrical feedthrough for electrorefiner system

    Science.gov (United States)

    Williamson, Mark; Wiedmeyer, Stanley G; Willit, James L; Barnes, Laurel A; Blaskovitz, Robert J

    2013-12-03

    A bus bar electrical feedthrough for an electrorefiner system may include a retaining plate, electrical isolator, and/or contact block. The retaining plate may include a central opening. The electrical isolator may include a top portion, a base portion, and a slot extending through the top and base portions. The top portion of the electrical isolator may be configured to extend through the central opening of the retaining plate. The contact block may include an upper section, a lower section, and a ridge separating the upper and lower sections. The upper section of the contact block may be configured to extend through the slot of the electrical isolator and the central opening of the retaining plate. Accordingly, relatively high electrical currents may be transferred into a glovebox or hot-cell facility at a relatively low cost and higher amperage capacity without sacrificing atmosphere integrity.

  14. 76 FR 16852 - Hours of Service (HOS) of Drivers; Assessing the Safety Impact of the Exemption From the 14-Hour...

    Science.gov (United States)

    2011-03-25

    ... Pyrotechnics Association (APA) an exemption from the current HOS prohibition against driving a commercial motor...: Thomas Yager, FMCSA Driver and Carrier Operations Division; Office of Bus and Truck Standards and... 381.300(b)). APA's Independence Day Operations and the Exemption from 49 CFR 395.3(a)(2) APA is a...

  15. Research of WLAN CAN Bus Data Test System

    Science.gov (United States)

    Wu, Weibin; Zhu, Yuqing; Hong, Tiansheng; Ye, Cheng; Ye, Zhijie; He, Guangbin; Li, Haobiao

    Both controller area network (CAN) and wireless local area network (WLAN) bus technologies are developing rapidly nowadays. But the study on WLAN technology with CAN bus data is relative to be less researched. So a WLAN CAN bus data test system was present in this paper. The system hardware consists of two control modules, each of which consistently allows link test to the CAN bus network. Each hardware of the module is composed by a microcontroller STC12C5410AD, a CAN bus control unit MCP2515, a CAN bus transceiver MCP2551 and a RF wireless module RF903. During the test process, the CAN bus analyzer, Kvaser USBCAN II, receives and dispatches the CAN messages. Test results showed that the system's error score was approximately zero when messages are transmitted and the system can message transmission from one side of CAN panel point to the other side. The communication of the system is suitable for the CAN treaty standard and it can allow wireless message transmission to other suitable networks meeting the CAN treaty standard as well. Finally the system has been applied to the project for hill citrus leaf area index (LAI) acquisition.

  16. In-vehicle stereo vision system for identification of traffic conflicts between bus and pedestrian

    Directory of Open Access Journals (Sweden)

    Salvatore Cafiso

    2017-02-01

    Full Text Available The traffic conflict technique (TCT was developed as “surrogate measure of road safety” to identify near-crash events by using measures of the spatial and temporal proximity of road users. Traditionally applications of TCT focus on a specific site by the way of manually or automated supervision. Nowadays the development of in-vehicle (IV technologies provides new opportunities for monitoring driver behavior and interaction with other road users directly into the traffic stream. In the paper a stereo vision and GPS system for traffic conflict investigation is presented for detecting conflicts between vehicle and pedestrian. The system is able to acquire geo-referenced sequences of stereo frames that are used to provide real time information related to conflict occurrence and severity. As case study, an urban bus was equipped with a prototype of the system and a trial in the city of Catania (Italy was carried out analyzing conflicts with pedestrian crossing in front of the bus. Experimental results pointed out the potentialities of the system for collection of data that can be used to get suitable traffic conflict measures. Specifically, a risk index of the conflict between pedestrians and vehicles is proposed to classify collision probability and severity using data collected by the system. This information may be used to develop in-vehicle warning systems and urban network risk assessment.

  17. Using microcomputers for lighting appliance control using a DALI bus

    Directory of Open Access Journals (Sweden)

    Sysala Tomas

    2016-01-01

    Full Text Available Article concerns the DALI bus theoretical and practical aspects. The DALI bus is a modern technology developed especially for illumination systems control. Authors are outlining communication basic principles related to the physical layer and going up to more complex data transactions among particular devices. The article main topic is aimed at two device models development based on microcontroller and exploiting that technology. The first of those two devices is a DALI slave unit enabling the light source or multi switch with light indication components control via DALI bus. The second device measures the ambient illumination intensity and it also detects errors in the load.

  18. Design and Research on Automotive Controller Area Network Bus Analyzer

    Directory of Open Access Journals (Sweden)

    Hongwei CUI

    2014-03-01

    Full Text Available The detection method of automotive controller area network bus is researched in this paper. Failure identifying of CAN bus under different working conditions has been realized. In order to realizing intelligent failure diagnosis, data fusion means has been put forward in this paper. The composition of analysis and detection system is introduced. By analyzing and processing the data of CAN bus and sensors, work condition of automotive is achieved. Multi-pattern data fusion model and algorithm for failure diagnosis are researched. The analyzer and detection system designed in this paper can be applied to automotive fault analysis, troubleshooting and maintenance.

  19. Solving of school bus routing problem by ant colony optimization

    OpenAIRE

    Arias-Rojas, Juan S.; Jiménez-Gordillo, J. F. (José Fernando); Montoya-Torres, J. R. (Jairo Rafael)

    2011-01-01

    The school bus routing problem (SBRP) seeks to plan an efficient schedule of a fleet of school buses that must pick up students from various bus stops and deliver them by satisfying various constraints: maximum capacity of the bus, maximum riding time of students, time window to arrive to school. In this paper, we consider a case study of SBRP for a school in Bogotá, Colombia. The problem is solved using ant colony optimization (ACO). Computational experiments are performed using real data. R...

  20. A new MV bus transfer scheme for nuclear power plants

    Directory of Open Access Journals (Sweden)

    Chang Choong-Koo

    2015-01-01

    Full Text Available Fast bus transfer method is the most popular and residual voltage transfer method that is used as a backup in medium voltage buses in general. The use of the advanced technology like open circuit voltage prediction and digital signal processing algorithms can improve the reliability of fast transfer scheme. However, according to the survey results of the recent operation records in nuclear power plants, there were many instances where the fast transfer scheme has failed. To assure bus transfer in any conditions and circumstances, uninterruptible bus transfer scheme utilizing the state of the art medium voltage UPS is discussed and elaborated.

  1. Swisstrolley 3 - An articulated trolley bus; SWISSTROLLEY 3. Gelenktrolleybus

    Energy Technology Data Exchange (ETDEWEB)

    Gisler, H.-J.

    2006-07-01

    This illustrated final report for the Swiss Federal Office of Energy (SFOE) takes a look at the Swisstrolley 3 low-floor, articulated trolley bus developed in Switzerland by the Hess AG company. Various features of the variants of the trolley bus, including single vehicle, single and double-articulated buses and bus trailers, are discussed. The reductions achieved in energy consumption, weight and noise are discussed. Typical values for power consumption are presented in graphical form. Economic viability and passenger-friendliness are examined, as are possibilities for further improvement.

  2. Research on Optimization for Motion Control Bus Based on Ethernet

    Directory of Open Access Journals (Sweden)

    Kai Sun

    2013-01-01

    Full Text Available Field bus system has been successfully introduced into industrial automation. Nowadays, most of the motion control bus is based on the Ethernet physical layer, and all of the new standards are based on the Ethernet physical layer. This paper introduces a new optimized technology based on motion control bus of the Ethernet physical layer, which includes the prediction mechanism in the arrival of the frames, the retransmission mechanism in advance, and a new mechanism of independent verification of data segment. Tests show that using the mechanisms in this paper can enhance efficiency and reliability in communication process.

  3. Mobilitätserfahrungen und Grenz-Infrastruktur - Bus-Stop Nickelsdorf 2015, eine Bestandsaufnahme

    Directory of Open Access Journals (Sweden)

    Michael Hieslmayer

    2016-12-01

    Full Text Available A video animation serves to characterise the mobilities and processes around the arrival of refugees at a border checkpoint. The municipality of Nickelsdorf (province of „Burgenland“ and the refugee arrivals in fall 2015 serve as field. The authors consider borders neither as simple thresholds nor as ramparts, but as socio-political places that de-mobilize or accelerate transit and sustained movement. The refugees’/migrants’ routes in the Balkans coincide with the biographical mobilities of the bus drivers who transport the arriving people, traffickers are in connivance with customs officers, and infrastructures in proximity of borders boost or collapse in accordance with the changing border regimes. Transnational networks continue to operate in spite of routes and borders that are politically declared as being “closed”.

  4. Common Airborne Instrumentation System: CAIS Bus Interface Standard, A00.00-C001. Revision A

    National Research Council Canada - National Science Library

    Jones, Sidney

    1997-01-01

    .... This interface control document (ICD) was written to provide a single document that designers of CAIS bus controllers and data acquisition units could reference to ensure interoperability on the CAIS bus. This ICD establishes the requirements for digital command/response, time division multiplexing techniques for a single CAIS bus. It encompasses the physical, electrical, and protocol aspects of the CAIS bus.

  5. Common mental disorders in public transportation drivers in Lima, Peru.

    Science.gov (United States)

    Ruiz-Grosso, Paulo; Ramos, Mariana; Samalvides, Frine; Vega-Dienstmaier, Johann; Kruger, Hever

    2014-01-01

    Traffic related injuries are leading contributors to burden of disease worldwide. In developing countries a high proportion of them can be attributed to public transportation vehicles. Several mental disorders including alcohol and drug abuse, psychotic disorders, mental stress, productivity pressure, and low monetary income were found predictors of high rates of traffic related injuries in public transportation drivers. The goal of this study was to estimate the prevalence of common mental disorders in the population of public transportation drivers of buses and rickshaws in Lima, Peru. Cross sectional study. A sample of bus and rickshaw drivers was systematically selected from formal public transportation companies using a snowball approach. Participants completed self-administered questionnaires for assessing major depressive episode, anxiety symptoms, alcohol abuse, and burnout syndrome. Socio demographic information was also collected. The analyses consisted of descriptive measurement of outcomes taking into account both between and within cluster standard deviation (BCSD and WCSD). A total of 278 bus and 227 rickshaw drivers out of 25 companies agreed to participate in the study. BCSD for major depressive episode, anxiety symptoms and burnout syndrome was not found significant (p>0.05). The estimated prevalence of each variable was 13.7% (IC95%: 10.7-16.6%), 24.1% (IC95%: 19.4-28.8%) and 14.1% (IC95%: 10.8-17.4%) respectively. The estimated prevalence of alcohol abuse was 75.4% (IC95%: 69-81.7%, BCSD = 12.2%, WCSD = 41.9%, intra class correlation (ICC): 7.8%). Common mental disorders such as alcohol abuse, major depressive episode, anxiety symptoms and burnout syndrome presented higher rates in public transportation drivers than general population.

  6. Optimization Model for Headway of a Suburban Bus Route

    Directory of Open Access Journals (Sweden)

    Xiaohong Jiang

    2014-01-01

    Full Text Available Due to relatively low passenger demand, headways of suburban bus route are usually longer than those of urban bus route. Actually it is also difficult to balance the benefits between passengers and operators, subject to the service standards from the government. Hence the headway of a suburban bus route is usually determined on the empirical experience of transport planners. To cope with this problem, this paper proposes an optimization model for designing the headways of suburban bus routes by minimizing the operating and user costs. The user costs take into account both the waiting time cost and the crowding cost. The feasibility and validity of the proposed model are shown by applying it to the Route 206 in Jiangning district, Nanjing city of China. Weightages of passengers’ cost and operating cost are further discussed, considering different passenger flows. It is found that the headway and objective function are affected by the weightages largely.

  7. Fixed Route Accessible Bus Service in Connecticut : A Case Study

    Science.gov (United States)

    1981-07-01

    U.S. Department of Transportation regulations implementing Section 504 of the Rehabilitation Act of 1973, require transit agencies to provide wheelchair accessibility on fixed-route bus service. The study is part of the series which included studies ...

  8. Analysis of movable bus stop boarding and alighting areas.

    Science.gov (United States)

    2013-05-01

    This study explored the feasibility of using movable and reusable boarding and alighting (B&A) pads at bus stops. : Potential design alternatives in terms of materials and structural support for these pads were evaluated. The review : focused on the ...

  9. Multi-Gigabit Rate Radiation Hard Bus Project

    Data.gov (United States)

    National Aeronautics and Space Administration — High speed robust very low power radiation hardened bus interconnects are required to accelerate on-board computations, further improve reconfigurability and upgrade...

  10. FTA fuel cell bus program : research accomplishments through 2011.

    Science.gov (United States)

    2012-03-01

    Prepared by the Federal Transit Administration (FTA) Office of Research, Demonstration, and Innovation (TRI), this report summarizes the accomplishments of fuel-cell-transit-bus-related research and demonstrations projects supported by FTA through 20...

  11. Black silicon solar cells with black bus-bar strings

    DEFF Research Database (Denmark)

    Davidsen, Rasmus Schmidt; Tang, Peter Torben; Mizushima, Io

    2016-01-01

    We present the combination of black silicon texturing and blackened bus-bar strings as a potential method for obtaining all-black solar panels, while using conventional, front-contacted solar cells. Black silicon was realized by maskless reactive ion etching resulting in total, average reflectance...... below 0.5% across a 156x156 mm2 silicon wafer. Four different methods to obtain blackened bus-bar strings were compared with respect to reflectance, and two of these methods (i.e., oxidized copper and etched solder) were used to fabricate functional allblack solar 9-cell panels. The black bus-bars (e.......g., by oxidized copper) have a reflectance below 3% in the entire visible wavelength range. The combination of black silicon cells and blackened bus-bars results in aesthetic, all-black panels based on conventional, front-contacted solar cells without compromising efficiency....

  12. Analysis of feeder bus network design and scheduling problems.

    Science.gov (United States)

    Almasi, Mohammad Hadi; Mirzapour Mounes, Sina; Koting, Suhana; Karim, Mohamed Rehan

    2014-01-01

    A growing concern for public transit is its inability to shift passenger's mode from private to public transport. In order to overcome this problem, a more developed feeder bus network and matched schedules will play important roles. The present paper aims to review some of the studies performed on Feeder Bus Network Design and Scheduling Problem (FNDSP) based on three distinctive parts of the FNDSP setup, namely, problem description, problem characteristics, and solution approaches. The problems consist of different subproblems including data preparation, feeder bus network design, route generation, and feeder bus scheduling. Subsequently, descriptive analysis and classification of previous works are presented to highlight the main characteristics and solution methods. Finally, some of the issues and trends for future research are identified. This paper is targeted at dealing with the FNDSP to exhibit strategic and tactical goals and also contributes to the unification of the field which might be a useful complement to the few existing reviews.

  13. Public transit: Bus, paratransit, and ridesharing. Transportation research record

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    Contents: part 1--bus operations--service reliability program of the southern california rapid transit district: a test of the short-term impacts on line 26-51; bus route o-d matrix generation: relationship between biproportional and recursive methods; transportation systems management options to improve urban bus route performance using computer simulation; development and application of performance measures for rural public transportation operators; rural public transportation in alaska: present and future options; particulate trap installation in a man articulated transit bus; part 2--paratransit--methodology for conducting a transportation survey of persons with disabilities; marketing rural transit among senior populations; evolution of functional eligibility and certification for paratransit service: the chicago experience; part 3--ridesharing--the state of the commute in southern california; hispanic market research in the southern california market; evaluation of second-year effectiveness of guaranteed ride home service at warner center transportation management organization; effectiveness of a statewide ridesharing promotion: california rideshare week.

  14. Application Layer Definition and Analyses of Controller Area Network Bus for Wire Harness Assembly Machine

    OpenAIRE

    Guo, Hui; Jiang, Ying

    2006-01-01

    With the feature of multi-master bus access, nondestructive contention-based arbitration and flexible configuration, Controller Area Network (CAN) bus is applied into the control system of Wire Harness Assembly Machine (WHAM). To accomplish desired goal, the specific features of the CAN bus is analyzed by compared with other field buses and the functional performances in the CAN bus system of WHAM is discussed. Then the application layer planning of CAN bus for dynamic priority is presented. ...

  15. Accessibility analysis to public services by bus transportation

    OpenAIRE

    Košir, Uroš

    2009-01-01

    Graduation thesis focuses on ESRI GIS tools, Model Builder and Network analyst. It is shown how automated process with geoprocesing models simplify procedures, with prepared data, for further analyses. Data, established with analyses, were used for accessability analysis to public services by bus transportation. Analyses were made for territory of Slovenia and their statistical regions. For better understanding of choice between a car and a bus accessibility to public services, thesis was sup...

  16. VHDL resolved function based inner communication bus for FPGA

    Science.gov (United States)

    Pozniak, Krzysztof T.

    2017-08-01

    This article discusses a method of building an internal, universal and parametric bus. The solution was designed for a variety of FPGA families and popular VHDL compilers. The algorithm of automatic configuration of address space and methods of receiving and sending addressed data are discussed. The basic solution realized in VHDL language in a behavioral form and chosen examples of practical use of the internal bus are presented in detail.

  17. Unhealthy and healthy weight control behaviours among bus operators.

    Science.gov (United States)

    Escoto, K H; French, S A

    2012-03-01

    Urban bus operators are an occupational group with high rates of overweight and obesity. Understanding methods bus operators use for weight control may be important; there may be increased risk for these workers to engage in less healthy weight management behaviours due to stressful working conditions. To examine the prevalence of unhealthy and healthy weight control behaviours used by bus operators and examine associations between use of unhealthy weight control behaviours and work-related and sociodemographic variables. Bus operators from four different transit garages were invited to complete a self-administered survey; height and weight were measured by research staff. Unhealthy and healthy weight control behaviours, work hours, work schedule and social support were measured with self-report items on the employee survey. Logistic regression analysis was conducted to estimate associations. Nearly 60% of bus operators endorsed at least one unhealthy method; over 50% reported skipping meals, 30% fasted and 10% reported taking diet pills in the past year. Bus operator gender, race, body mass index status and hours worked per week showed significant associations with using at least one unhealthy weight control behaviour. Worksite interventions should emphasize the benefit of healthy eating and physical activity but should also address the use of less healthy methods for weight control for individuals employed in transportation occupations.

  18. CROSS-FRONTIER PUBLIC TRANSPORT: Y BUS

    CERN Multimedia

    CERN Housing Service

    2002-01-01

    'Y' buses cover the journey between Val Thoiry in France (shopping centre including'Migros' and other stores) and Blandonnet in Switzerland, where they stop outside the 'Jumbo' shop, now renamed 'Carrefour'. In France, the buses connect up Thoiry, Sergy and St. Genis, then cross the border to stop outside CERN, Meyrin, before continuing towards Geneva along the 'Route de Meyrin', stopping outside the 'La Tour' hospital, then at the terminus Blandonnet. The normal fare on French territory with a slight incursion into Switzerland for this purpose as far as CERN, Meyrin, is 1.20 Euros per single journey (ticket valid for one hour). The same amount is charged for any single journey in Switzerland. For example, the cost of a single journey between St. Genis and the 'La Tour' hospital would be 2.40 Euros. The season ticket ('Abonnement de Travail') opens the right to purchase a ticket valid over any period of seven days which entitles the holder to as many journeys as required between the bus stop nearest to the pl...

  19. DIMETHYL ETHER (DME)-FUELED SHUTTLE BUS DEMONSTRATION PROJECT

    Energy Technology Data Exchange (ETDEWEB)

    Elana M. Chapman; Shirish Bhide; Jennifer Stefanik; Howard Glunt; Andre L. Boehman; Allen Homan; David Klinikowski

    2003-04-01

    The objectives of this research and demonstration program are to convert a campus shuttle bus to operation on dimethyl ether, a potential ultra-clean alternative diesel fuel. To accomplish this objective, this project includes laboratory evaluation of a fuel conversion strategy, as well as, field demonstration of the DME-fueled shuttle bus. Since DME is a fuel with no lubricity (i.e., it does not possess the lubricating quality of diesel fuel), conventional fuel delivery and fuel injection systems are not compatible with dimethyl ether. Therefore, to operate a diesel engine on DME one must develop a fuel-tolerant injection system, or find a way to provide the necessary lubricity to the DME. In this project, they have chosen the latter strategy in order to achieve the objective with minimal need to modify the engine. Their strategy is to blend DME with diesel fuel, to obtain the necessary lubricity to protect the fuel injection system and to achieve low emissions. The bulk of the efforts over the past year were focused on the conversion of the campus shuttle bus. This process, started in August 2001, took until April 2002 to complete. The process culminated in an event to celebrate the launching of the shuttle bus on DME-diesel operation on April 19, 2002. The design of the system on the shuttle bus was patterned after the system developed in the engine laboratory, but also was subjected to a rigorous failure modes effects analysis (FMEA, referred to by Air Products as a ''HAZOP'' analysis) with help from Dr. James Hansel of Air Products. The result of this FMEA was the addition of layers of redundancy and over-pressure protection to the system on the shuttle bus. The system became operational in February 2002. Preliminary emissions tests and basic operation of the shuttle bus took place at the Pennsylvania Transportation Institute's test track facility near the University Park airport. After modification and optimization of the system on

  20. A Rule-Based Energy Management Strategy for a Plug-in Hybrid School Bus Based on a Controller Area Network Bus

    National Research Council Canada - National Science Library

    Peng, Jiankun; Fan, Hao; He, Hongwen; Pan, Deng

    2015-01-01

    .... To evaluate the controller area network (CAN) bus performance features such as the bus load, signal hysteresis, and to verify the reliability and real-time performance of the CAN bus multi-node control method, a co-simulation platform was built...

  1. An Improved Model for Headway-Based Bus Service Unreliability Prevention with Vehicle Load Capacity Constraint at Bus Stops

    Directory of Open Access Journals (Sweden)

    Weiya Chen

    2012-01-01

    Full Text Available This paper presents an improved model for improving headway-based bus route service reliability at bus stops using real-time preventive operation control, taking into account dynamic interaction among random passenger demand, stochastic driving conditions of route segments, and vehicle load capacity constraint. In this model, the real-time information of passenger demand and vehicle operation is involved to predict the imminent unacceptable headway deviation, in the case of which some in-time preventive control strategies are deployed according to the given control rules. As a case study, a single fixed bus route with high-frequency services was simulated and different scenarios of real-time preventive operation control were performed. Headway adherence and average passenger wait time were used to measure bus service reliability. The results show that the improved model is closer to the real bus route service, and using real-time information to predict potential service unreliability and trigger in-time preventive control can reduce bus bunching and avoid big gap.

  2. ANALISIS SARANA ANGKUTAN UMUM BUS DAMRI DI KOTA SEMARANG

    Directory of Open Access Journals (Sweden)

    Subhan Rizal Amin

    2015-12-01

    Full Text Available This study aims to analyze the availability and use of public transportation by taking a case study of the Damri bus which has Ngaliyan-Pucanggading route. The availability of public transport is not comparable to the demand for public transportation services so that the problems of transportation emerge. Additionally, the use of public transport becomes an important factor to develop the transportation. The study is conducted by surveying the Damri passengers of B.04 lane and logistic regression is used for the analysis. The method of determining the needs of transportation is issued by Departemen Perhubungan. It is used to calculate and determine whether the public transportation should be added or reduced. Then, the factors used as the independent variables in the analysis are the Damri’s safety, effectiveness, efficiency, service and reliability. The results show that Perum Damri does not need to add more Damri bus for B.04 because the results’ calculation is 0.6. and the factors that significantly influence the use Damri bus is the variable of safety, effectiveness and efficiency. However, the variables of service and reliability do not significantly influence the use of B.04 Damri bus.Penelitian ini bertujuan untuk menganalisis ketersediaan dan penggunaan angkutan sarana angkutan umum penumpang dengan mengambil studi kasus pada bus Damri jalur dengan trayek Ngaliyan-Pucanggading. Ketersediaan sarana angkutan umum yang tersedia tidak sebanding dengan besarnya permintaan akan jasa angkutan umum oleh masyarakat umum sehingga muncul permasalahan transportasi. Di samping itu, penggunaan angkutan umum yang beroperasi menjadi faktor penting dalam upaya pengembangan sarana transportasi. Penelitian ini dilakukan dengan menggunakan metode survey terhadap para penumpang bus Damri jalur B.04 dan dianalisis dengan Regresi Logistik. Metode penentuan kebutuhan armada dikeluarkan oleh Departemen Perhubungan yang digunakan untuk menghitung apakah suatu

  3. Iterated Local Search Algorithm with Strategic Oscillation for School Bus Routing Problem with Bus Stop Selection

    Directory of Open Access Journals (Sweden)

    Mohammad Saied Fallah Niasar

    2017-02-01

    Full Text Available he school bus routing problem (SBRP represents a variant of the well-known vehicle routing problem. The main goal of this study is to pick up students allocated to some bus stops and generate routes, including the selected stops, in order to carry students to school. In this paper, we have proposed a simple but effective metaheuristic approach that employs two features: first, it utilizes large neighborhood structures for a deeper exploration of the search space; second, the proposed heuristic executes an efficient transition between the feasible and infeasible portions of the search space. Exploration of the infeasible area is controlled by a dynamic penalty function to convert the unfeasible solution into a feasible one. Two metaheuristics, called N-ILS (a variant of the Nearest Neighbourhood with Iterated Local Search algorithm and I-ILS (a variant of Insertion with Iterated Local Search algorithm are proposed to solve SBRP. Our experimental procedure is based on the two data sets. The results show that N-ILS is able to obtain better solutions in shorter computing times. Additionally, N-ILS appears to be very competitive in comparison with the best existing metaheuristics suggested for SBRP

  4. National Driver Register (NDR) -

    Data.gov (United States)

    Department of Transportation — Information regarding individuals who have had their driver licenses revoked, suspended or otherwise denied for cause, or who have been convicted of certain traffic...

  5. Criteria for driver impairment

    NARCIS (Netherlands)

    Brookhuis, K.A.; De Waard, D.; Fairclough, S.H

    2003-01-01

    Most traffic accidents can be attributed to driver impairment, e.g. inattention, fatigue, intoxication, etc. It is now technically feasible to monitor and diagnose driver behaviour with respect to impairment with the aid of a limited number of in-vehicle sensors. However, a valid framework for the

  6. Graz, city bus fleet running on 100% biodiesel

    Energy Technology Data Exchange (ETDEWEB)

    Ablasser, G. [City of Graz (Austria)

    2008-07-01

    Graz collects used cooking oil on a large scale. This used cooking oil is converted into biodiesel and along with biodiesel produced from rape seed provides the whole bus fleet (135 buses) with fuel. The bus fleet also got an optimized high quality interior design (information screens, air conditioning, a better acoustic and visual information and ramps for mobility-impaired persons). Attractiveness of the city will increase due to lower pollution levels by the biodiesel driven buses. Public transport became more user-friendly, especially for the disabled and other specific groups. The local public transport company, GBV, carries out a series of technical, ecological and economic trials of 100% biodiesel operation in the meantime also during wintertime. Within the framework of CIVITAS trendsetter, the whole bus fleet was either converted to biodiesel operation or new buses were bought already equipped for biodiesel operations. The 100% switch to alternative fuel for the entire bus fleet of the City of Graz is new; Graz is the only city in the world operating the whole bus fleet on 100% biodiesel.

  7. Bus transport network of Shenyang considering competitive and cooperative relationship

    Science.gov (United States)

    Hu, Baoyu; Feng, Shumin; Nie, Cen

    2017-01-01

    Competition and cooperation is a universal phenomenon in bus transport networks (BTNs) because of the shared stations between bus routes. A measuring method is proposed for competitive and cooperative relationship between bus routes. Based on this measurement, we develop a new representation model for BTNs, namely competitive-cooperative space R. This model is applied to investigate empirically bus transport network of Shenyang (BTN-S) from China. We present the histograms of competitive-cooperative coefficients, competitive coefficients and cooperative coefficients to illustrate that competitive and cooperative relationship plays an important role in transporting passengers. The competitive-cooperative situation shows that cooperative relationship holds an absolutely dominant position in BTN-S. To explore the networked characteristics, we present some empirical distributions, for the number of bus stations on a route, the number of shared stations between two routes, degree and weighted degree, competitive strength, and cooperative strength. We also examine the correlations between degree and competitive strength, and between degree and cooperative strength. Besides, we investigate the diversities of competitive strength and cooperative strength in BTN-S. This study can help us to understand the BTN from a deeper level.

  8. Bus network redesign for inner southeast suburbs of Melbourne, Australia

    Science.gov (United States)

    Pandangwati, S. T.; Milyanab, N. A.

    2017-06-01

    Public transport is the most effective mode of transport in the era of climate change and oil depletion. It can address climate change issues by reducing urban greenhouse gas emission and oil consumption while at the same time improving mobility. However, many public transport networks are not effective and instead create high operating costs with low frequencies and occupancy. Melbourne is one example of a metropolitan area that faces this problem. Even though the city has well-integrated train and tram networks, Melbourne’s bus network still needs to be improved. This study used network planning approach to redesign the bus network in the City of Glen Eira, a Local Government Area (LGA) in the southeastern part of Metropolitan Melbourne. The study area is the area between Gardenvale North and Oakleigh Station, as well as between Caulfield and Patterson Stations. This area needs network improvement mainly because of the meandering bus routes that run within it. This study aims to provide recommendations for improving the performance of bus services by reducing meandering routes, improving transfer point design and implementing coordinated timetables. The recommendations were formulated based on a ‘ready-made’ concept to increase bus occupancy. This approach can be implemented in other cities with similar problems and characteristics including those in Indonesia.

  9. Car Delay Model near Bus Stops with Mixed Traffic Flow

    Directory of Open Access Journals (Sweden)

    Yang Xiaobao

    2013-01-01

    Full Text Available This paper proposes a model for estimating car delays at bus stops under mixed traffic using probability theory and queuing theory. The roadway is divided to serve motorized and nonmotorized traffic streams. Bus stops are located on the nonmotorized lanes. When buses dwell at the stop, they block the bicycles. Thus, two conflict points between car stream and other traffic stream are identified. The first conflict point occurs as bicycles merge to the motorized lane to avoid waiting behind the stopping buses. The second occurs as buses merge back to the motorized lane. The average car delay is estimated as the sum of the average delay at these two conflict points and the delay resulting from following the slower bicycles that merged into the motorized lane. Data are collected to calibrate and validate the developed model from one site in Beijing. The sensitivity of car delay to various operation conditions is examined. The results show that both bus stream and bicycle stream have significant effects on car delay. At bus volumes above 200 vehicles per hour, the curbside stop design is not appropriate because of the long car delays. It can be replaced by the bus bay design.

  10. Optical Pipelined Multi-bus Interconnection Network Intrinsic Topologies

    Directory of Open Access Journals (Sweden)

    Brian Joseph d'Auriol

    2017-10-01

    Full Text Available Digital all-optical parallel computing is an important research direction and spans conventional devices and convergent nano-optics deployments. Optical bus-based interconnects provide interesting aspects such as relative information communication speed-up or slow-down between optical signals. This aspect is harnessed in the newly proposed All-Optical Linear Array with a Reconfigurable Pipelined Bus System (OLARPBS model. However, the physical realization of such communication interconnects needs to be considered. This paper considers spatial layouts of processing elements along with the optical bus light paths that are necessary to realize the corresponding interconnection requirements. A metric in terms of the degree of required physical constraint is developed to characterize the variety of possible solutions. Simple algorithms that determine spatial layouts are given. It is shown that certain communication interconnection structures have associated intrinsic topologies.

  11. Optimal Locations of Bus Stops Connecting Subways near Urban Intersections

    Directory of Open Access Journals (Sweden)

    Yuan Cui

    2015-01-01

    Full Text Available Unsuitable locations of bus stops which provide feeder transportation connecting subways near urban intersections usually lead to the low efficiency of public transport and level of passenger service. A multiobjective optimization model to distribute such stop locations is proposed to attain the shortest total walk distance of passengers and minimum delay time of cars through intersections and travel time of buses. The Pareto frontier and optimal solutions for the proposed model are given by the distance-based and enumerative methods. The Xizhimen bus stop is selected to implement case studies for verifying the validity of the proposed model. The analysis of sensitivity on possible solutions is also carried out in the case studies. The results show that the proposed model is capable of optimizing the locations of bus stops connecting subways near intersections and helpful to improve the level of passengers service and operational efficiency of public transportation.

  12. American Fuel Cell Bus Project Evaluation. Second Report

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, Leslie [National Renewable Energy Lab. (NREL), Golden, CO (United States); Post, Matthew [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-09-01

    This report presents results of the American Fuel Cell Bus (AFCB) Project, a demonstration of fuel cell electric buses operating in the Coachella Valley area of California. The prototype AFCB was developed as part of the Federal Transit Administration's (FTA's) National Fuel Cell Bus Program. Through the non-profit consortia CALSTART, a team led by SunLine Transit Agency and BAE Systems developed a new fuel cell electric bus for demonstration. SunLine added two more AFCBs to its fleet in 2014 and another in 2015. FTA and the AFCB project team are collaborating with the U.S. Department of Energy (DOE) and DOE's National Renewable Energy Laboratory to evaluate the buses in revenue service. This report summarizes the performance results for the buses through June 2015.

  13. Contagion processes on urban bus networks in Indian cities

    CERN Document Server

    Chatterjee, Atanu; Jagannathan, Krishna

    2015-01-01

    Bus transportation is considered as one of the most convenient and cheapest modes of public transportation in Indian cities. Due to their cost-effectiveness and wide reachability, they help a significant portion of the human population in cities to reach their destinations every day. Although from a transportation point of view they have numerous advantages over other modes of public transportation, they also pose a serious threat of contagious diseases spreading throughout the city. The presence of numerous local spatial constraints makes the process and extent of epidemic spreading extremely difficult to predict. Also, majority of the studies have focused on the contagion processes on scale-free network topologies whereas, spatially-constrained real-world networks such as, bus networks exhibit a wide-spectrum of network topology. Therefore, we aim in this study to understand this complex dynamical process of epidemic outbreak and information diffusion on the bus networks for six different Indian cities usin...

  14. A hierarchical process for optimizing bus stop distribution

    Directory of Open Access Journals (Sweden)

    Zhengdong Huang

    2014-01-01

    Full Text Available Transit stop spacing is an important indicator in deploying public transit services. This paper presents a hierarchical process for optimizing distribution of bus stops in the context of multi-modal transit development in large cities. Firstly, connection stops are generated manually to connect with other transit facilities. Secondly, key stops are identified based on a coverage model that minimizing total distance, using node centrality value as weight. Thirdly, ordinary bus stops are optimized with coverage model that maximizing potential transit demand. The analytical process is based on a combination of raster and vector data models in Geographical information system, which allows for flexible computing and effective evaluation.

  15. Overview of Multi-DC-Bus Solutions for DC Microgrids

    DEFF Research Database (Denmark)

    Ricchiuto, D.; Mastromauro, R.A.; Liserre, Marco

    2013-01-01

    DC Microgrids have recently received a lot of attention in the last years due to high penetration of renewable energy sources as well as distributed energy storage systems. In the future DC microgrids could be preferable respect to AC microgrids in terms of redundancy since multi-DC-Bus solutions...... could provide a continuative power supply to the loads. An overview of Multi-DC-Bus solutions is presented in this paper. The performances are compared on the basis of possible DC microgrid configurations, redundancy, different DC voltage levels....

  16. Design of temperature monitoring system based on CAN bus

    Science.gov (United States)

    Zhang, Li

    2017-10-01

    The remote temperature monitoring system based on the Controller Area Network (CAN) bus is designed to collect the multi-node remote temperature. By using the STM32F103 as main controller and multiple DS18B20s as temperature sensors, the system achieves a master-slave node data acquisition and transmission based on the CAN bus protocol. And making use of the serial port communication technology to communicate with the host computer, the system achieves the function of remote temperature storage, historical data show and the temperature waveform display.

  17. Black silicon with black bus-bar strings

    DEFF Research Database (Denmark)

    Davidsen, Rasmus Schmidt; Tang, Peter Torben; Mizushima, Io

    2016-01-01

    We present the combination of black silicon texturing and blackened bus-bar strings as a potential method for obtaining all-black solar panels, while using conventional, front-contacted solar cells. Black silicon was realized by mask-less reactive ion etching resulting in total, average reflectance...... below 0.5% across a 156x156 mm2 silicon wafer. Black bus-bars were realized by oxidized copper resulting in reflectance below 3% in the entire visible wavelength range. The combination of these two technologies may result in aesthetic, all-black panels based on conventional, front-contacted solar cells...

  18. Internet driver education study.

    Science.gov (United States)

    2010-05-01

    Incorporating technology through online courses, including drivers education (DE), is the wave of the future for : learning. While many states allow online DE as an accepted method of learning, Wisconsin currently only allows it on a : limited bas...

  19. NEW SYSTEM, NEW DRIVERS?

    Directory of Open Access Journals (Sweden)

    GABRIEL ELJAIEK

    2005-01-01

    Full Text Available This study seated out as objective to locate the discourses that the users of Transmilenio use to contribute to theconstruction of the identity of the system´s driver, considering that such discourses give account of the work identitiesconstructed from the practice of the driver. The work was made with written texts and oral stories (telephoneinterviews of users of the Transmilenio system, which used the Call Center of the organization in the lapse of oneweek, in order to inform about the drivers´ performance. The technique of Discourse Analysis was used to identify thediscourses of the users, which were then used to analyze the political implications that they have in the construction ofa part of the identity of the drivers.

  20. Driver behavior in traffic.

    Science.gov (United States)

    2012-02-01

    Existing traffic analysis and management tools do not model the ability of drivers to recognize their environment and respond to it with behaviors that vary according to the encountered driving situation. The small body of literature on characterizin...

  1. 49 CFR 571.220 - Standard No. 220; School bus rollover protection.

    Science.gov (United States)

    2010-10-01

    ... result from failure of the school bus body structure to withstand forces encountered in rollover crashes... 49 Transportation 6 2010-10-01 2010-10-01 false Standard No. 220; School bus rollover protection... STANDARDS Federal Motor Vehicle Safety Standards § 571.220 Standard No. 220; School bus rollover protection...

  2. DETERMINATION OF THE DELAY DEPARTURE TIME OF THE BUS FROM STOPPING POINT INTO THE CAR FLOW

    Directory of Open Access Journals (Sweden)

    P. Gorbachov

    2014-10-01

    Full Text Available An analytical model for estimation of the bus departure delax from the bus stopping point after passenger loading is presented. The model allows to take into account the traffic density on a particular road section of the transport network, as well as the bus parameters.

  3. Air flow through a non-airconditioned bus with open windows

    Indian Academy of Sciences (India)

    Smoke and tuft visualizations were also performed on an urban bus at 40 km/h. Numerical simulations were performed at the actual Reynolds number. Even though there were Reynolds number differences, the broad features were similar. Air enters the bus from the rear windows, moves to the front (relative to the bus) and ...

  4. Survey on the implementation and reliability of CubeSat electrical bus interfaces

    NARCIS (Netherlands)

    Bouwmeester, J.; Langer, M; Gill, E.K.A.

    2016-01-01

    This paper provides results and conclusions on a survey on the implementation and reliability aspects of CubeSat bus interfaces, with an emphasis on the data bus and power distribution. It provides recommendations for a future CubeSat bus standard. The survey is based on a literature study and a

  5. Computer-Based Video Instruction to Teach Students with Intellectual Disabilities to Use Public Bus Transportation

    Science.gov (United States)

    Mechling, Linda; O'Brien, Eileen

    2010-01-01

    This study investigated the effectiveness of computer-based video instruction (CBVI) to teach three young adults with moderate intellectual disabilities to push a "request to stop bus signal" and exit a city bus in response to target landmarks. A multiple probe design across three students and one bus route was used to evaluate effectiveness of…

  6. An epidemiological study of low back pain in professional drivers

    Science.gov (United States)

    Bovenzi, Massimo; Rui, Francesca; Negro, Corrado; D'Agostin, Flavia; Angotzi, Giuliano; Bianchi, Sandra; Bramanti, Lucia; Festa, GianLuca; Gatti, Silvana; Pinto, Iole; Rondina, Livia; Stacchini, Nicola

    2006-12-01

    The prevalence of low back pain (LBP) was investigated in 598 Italian professional drivers exposed to whole-body vibration (WBV) and ergonomic risk factors (drivers of earth moving machines, fork-lift truck drivers, truck drivers, bus drivers). The control group consisted of a small sample of 30 fire inspectors not exposed to WBV. Personal, occupational and health histories were collected by means of a structured questionnaire. Vibration measurements were performed on representative samples of the machines and vehicles used by the driver groups. From the vibration magnitudes and exposure durations, alternative measures of vibration dose were estimated for each subject. Daily vibration exposure, expressed in terms of 8-h energy-equivalent frequency-weighted acceleration, A(8), averaged 0.28-0.61 (range 0.10-1.18) m s -2 rms in the driver groups. Duration of exposure to WBV ranged between 1 and 41 years. The 7-day and 12-month prevalence of LBP was greater in the driver groups than in the controls. In the professional drivers, the occurrence of 12-month LBP, high intensity of LBP (Von Korff pain scale score ⩾5), and LBP disability (Roland & Morris disability scale score ⩾12) significantly increased with increasing cumulative vibration exposure. Even though several alternative measures of vibration exposure were associated with LBP outcomes, nevertheless a more regular trend of association with LBP was found for vibration dose expressed as ∑ a vit i (m s -2 h), in which the frequency-weighted acceleration, a v, and lifetime exposure duration, t, were given equal weight. In multivariate data analysis, individual characteristics (e.g. age, body mass index) and a physical load index (derived from combining manual materials handling and awkward postures) were significantly associated with LBP outcomes, while psychosocial work factors (e.g. job decision, job support) showed a marginal relation to LBP. This study tends to confirm that professional driving in industry

  7. Evaluating driver drowsiness countermeasures.

    Science.gov (United States)

    Gaspar, John G; Brown, Timothy L; Schwarz, Chris W; Lee, John D; Kang, Julie; Higgins, James S

    2017-05-29

    Driver drowsiness contributes to a substantial number of fatal and nonfatal crashes, with recent estimates attributing up to 21% of fatal crashes to drowsiness. This article describes recent NHTSA research on in-vehicle drowsiness countermeasures. Recent advances in technology and state detection algorithms have shown success in detecting drowsiness using a variety of data sources, including camera-based eye tracking, steering wheel position, yaw rate, and vehicle lane position. However, detection is just the first step in reducing drowsy driving crashes. Countermeasures are also needed to provide feedback to the driver, modify driver behavior, and prevent crashes. The goal of this study was to evaluate the effectiveness of in-vehicle drowsiness countermeasures in reducing drowsy lane departures. The tested countermeasures included different warning modalities in either a discrete or staged interface. Data were collected from 72 young adult drivers (age 21-32) in the high-fidelity full-motion National Advanced Driving Simulator. Drivers completed a 45-min simulated nighttime drive at 2 time points, late night and early morning, where drowsiness was manipulated by continuous hours awake. Forty-eight drivers were exposed to one of 6 countermeasures that varied along 2 dimensions, type and modality. The countermeasures relied on a steering-based drowsiness detection algorithm developed in prior NHTSA research. Twenty-four drivers received no countermeasure and were used as a baseline comparison. System effectiveness was measured by lane departures and standard deviation in lateral position (SDLP). There was a reduction in drowsy lane departure frequency and lane position variability for drivers with countermeasures compared to the baseline no-countermeasure group. Importantly, the data suggest that multistage alerts, which provide an indication of increasing urgency, were more effective in reducing drowsy lane departures than single-stage discrete alerts, particularly

  8. Graduated Driver Licensing

    Science.gov (United States)

    Bates, Lyndel J.; Allen, Siobhan; Armstrong, Kerry; Watson, Barry; King, Mark J.; Davey, Jeremy

    2014-01-01

    Graduated driver licensing (GDL) aims to gradually increase the exposure of new drivers to more complex driving situations and typically consists of learner, provisional and open licence phases. The first phase, the learner licence, is designed to allow novice drivers to obtain practical driving experience in lower risk situations. The learner licence can delay licensure, encourage novice drivers to learn under supervision, mandate the number of hours of practice required to progress to the next phase and encourage parental involvement. The second phase, the provisional licence, establishes various driving restrictions and thereby reduces exposure to situations of higher risk, such as driving at night, with passengers or after drinking alcohol. Parental involvement with a GDL system appears essential in helping novices obtain sufficient practice and in enforcing compliance with restrictions once the new driver obtains a provisional licence. Given the significant number of young drivers involved in crashes within Oman, GDL is one countermeasure that may be beneficial in reducing crash risk and involvement for this group. PMID:25364543

  9. A Quantitative Economics Of Seasonality In Bus Patronage In Nigeria

    African Journals Online (AJOL)

    The study thus set out to empirically investigate the myth or reality of the thesis that trip generation and trip attraction can be significantly season- determined. Collecting time series data over a ... Apposite recommendations were then made, sequel to highlighting of policy implications of findings. Key words: seasonality, bus ...

  10. Eliminating the empty bus syndrome by understanding dynamic travel behaviour

    CSIR Research Space (South Africa)

    Mokonyama, Mathetha T

    2012-11-01

    Full Text Available This chapter interrogates some empirical data to examine some of the contributory causes of EBS in South Africa, and uses the City of Johannesburg as a case study. The daily travel patterns of car users are analysed within the context of how bus...

  11. A Novel Time Synchronization Method for Dynamic Reconfigurable Bus

    Directory of Open Access Journals (Sweden)

    Zhang Weigong

    2016-01-01

    Full Text Available UM-BUS is a novel dynamically reconfigurable high-speed serial bus for embedded systems. It can achieve fault tolerance by detecting the channel status in real time and reconfigure dynamically at run-time. The bus supports direct interconnections between up to eight master nodes and multiple slave nodes. In order to solve the time synchronization problem among master nodes, this paper proposes a novel time synchronization method, which can meet the requirement of time precision in UM-BUS. In this proposed method, time is firstly broadcasted through time broadcast packets. Then, the transmission delay and time deviations via three handshakes during link self-checking and channel detection can be worked out referring to the IEEE 1588 protocol. Thereby, each node calibrates its own time according to the broadcasted time. The proposed method has been proved to meet the requirement of real-time time synchronization. The experimental results show that the synchronous precision can achieve a bias less than 20 ns.

  12. Heavy Duty Diesel Truck and Bus Hybrid Powertrain Study

    Science.gov (United States)

    2012-03-01

    4.1.4 Kenworth Truck Company (PACCAR Inc.) ................................................................... 72 4.1.5 Mack Trucks Inc. ( Volvo ...76 4.1.7 Nova Bus ( Volvo Group...74 4.1.5 Mack Trucks Inc. ( Volvo Group) Mack Trucks does not yet have any diesel-electric hybrid truck models in series production, although its

  13. Cascaded Amplifying Quantum Optical Taps: A Robust Noiseless Optical Bus

    Science.gov (United States)

    Bencheikh, K.; Simonneau, C.; Levenson, J. A.

    1997-01-01

    Two identical amplifying quantum optical taps, based on noiseless optical parametric amplification and twin beam quantum correlation, have been implemented in a series configuration and experimentally investigated. The result is an optical bus which we have shown to be robust with respect to downstream losses.

  14. Distributed cooperative synchronization strategy for multi-bus microgrids

    DEFF Research Database (Denmark)

    Sun, Yao; Zhong, Chaolu; Hou, Xiaochao

    2017-01-01

    synchronization methods based on centralized communication are very costly and not suitable for multi-bus microgrids that have a large number of distributed generators (DGs). To address this concern, this study presents an active synchronization control strategy based on distributed cooperation technology...

  15. Implementation of a Walking School Bus: Lessons Learned

    Science.gov (United States)

    Kong, Alberta S.; Sussman, Andrew L.; Negrete, Sylvia; Patterson, Nissa; Mittleman, Rachel; Hough, Richard

    2009-01-01

    Background: Obesity is rapidly becoming the most common chronic medical condition affecting children. To address this crisis, an Albuquerque, New Mexico, elementary school partnered with University of New Mexico researchers and conducted a Walking School Bus (WSB). The purpose of this article is to examine the feasibility of implementing a WSB.…

  16. Bussikontsern Go Bus ihaldab Harjumaa turgu / Signe Kalberg

    Index Scriptorium Estoniae

    Kalberg, Signe, 1959-

    2005-01-01

    AS-i Tarbus ja kaheksa bussiettevõtte ühinemisel moodustati AS Go Bus, ettevõte plaanib veel mitme bussifirma liitmist. Atko Grupi juhatuse esimehe Margo Tomingase, AS Sebe nõukogu esimehe Hugo Osula arvamus. Lisa: Konkurentsiamet hoiab silma peal

  17. High-Tech School Bus Teaches Students on the Road

    Science.gov (United States)

    Katims, Lauren

    2011-01-01

    Last year, kindergarten through high school students in the rural Hector, Arkansas, School District barely had the technology resources that keep kids interested in math and science. This year, they potentially have the most advanced resources in the country--before they even step into the classroom. One school bus in Arkansas' Pope County has…

  18. Aerodynamic study of state transport bus using computational fluid dynamics

    Science.gov (United States)

    Kanekar, Siddhesh; Thakre, Prashant; Rajkumar, E.

    2017-11-01

    The main purpose of this study was to develop the aerodynamic study of a Maharashtra state road transport bus. The rising fuel price and strict government regulations makes the road transport uneconomical now days. With the objective of increasing fuel efficiency and reducing the emission of harmful exhaust gases. It has been proven experimentally that vehicle consumes almost 40% of the available useful engine power to overcome the drag resistance. This provides us a huge scope to study the influence of aerodynamic drag. The initial of the project was to identify the drag coefficient of the existing ordinary type model called “Parivartan” from ANSYS fluent. After preliminary analysis of the existing model corresponding changes are made in such a way that their implementation should be possible at workshop level. The simulation of the air flow over the bus was performed in two steps: design on SolidWorks CAD and ANSYS (FLUENT) is used as a virtual analysis tool to estimate the drag coefficient of the bus. We have used the turbulence models k-ε Realizable having a better approximation of the actual result. Around 28% improvement in the drag coefficient is achieved by CFD driven changes in the bus design. Coefficient of drag is improved by 28% and fuel efficiency increased by 20% by CFD driven changes.

  19. Scheduling with Bus Access Optimization for Distributed Embedded Systems

    DEFF Research Database (Denmark)

    Eles, Petru; Doboli, Alex; Pop, Paul

    2000-01-01

    In this paper, we concentrate on aspects related to the synthesis of distributed embedded systems consisting of programmable processors and application-specific hardware components. The approach is based on an abstract graph representation that captures, at process level, both dataflow and the flow......, generates an efficient bus access scheme as well as the schedule tables for activation of processes and communications....

  20. Training Needs Analysis for Bus Depot Managers at GSRTC

    Science.gov (United States)

    Shah, Hardik; Gopal, Raj

    2012-01-01

    Purpose: With rapid industrialization and population growth in the urban and rural areas in India, the demand for public transport has risen sharply. In the fast changing scenario in the public transit sector, the role of a bus depot manager (DM) has also undergone substantial transformation. This paper aims to identify and gauge the…

  1. The Taking Ways of an Old School Bus

    Science.gov (United States)

    Kelley, Joan Thompson; Watkins, J. Foster

    1969-01-01

    The conversion of an "old school bus" in the late 1960s into a mobile library is discussed. The conversion was an element of educational service developed cooperatively between a regional educational laboratory and a rural school system. The project endeavored to improve the early experiences of future students, many of whom would have…

  2. ADlll:S ABABA BUS TERMINAL DESIGN COMPETITION.

    African Journals Online (AJOL)

    Ethiopian Association of Engineers and Architects. Today at the opening of the First National. Conference of the ... of the Architectural Competition for the New Bus. Terminal of Addis Ababa. Unfortunately, due to another ... A competition enables the client, the future owner of the project, to choose from various solutions.

  3. Real life testing of a Hybrid PEM Fuel Cell Bus

    Science.gov (United States)

    Folkesson, Anders; Andersson, Christian; Alvfors, Per; Alaküla, Mats; Overgaard, Lars

    Fuel cells produce low quantities of local emissions, if any, and are therefore one of the most promising alternatives to internal combustion engines as the main power source in future vehicles. It is likely that urban buses will be among the first commercial applications for fuel cells in vehicles. This is due to the fact that urban buses are highly visible for the public, they contribute significantly to air pollution in urban areas, they have small limitations in weight and volume and fuelling is handled via a centralised infrastructure. Results and experiences from real life measurements of energy flows in a Scania Hybrid PEM Fuel Cell Concept Bus are presented in this paper. The tests consist of measurements during several standard duty cycles. The efficiency of the fuel cell system and of the complete vehicle are presented and discussed. The net efficiency of the fuel cell system was approximately 40% and the fuel consumption of the concept bus is between 42 and 48% lower compared to a standard Scania bus. Energy recovery by regenerative braking saves up 28% energy. Bus subsystems such as the pneumatic system for door opening, suspension and brakes, the hydraulic power steering, the 24 V grid, the water pump and the cooling fans consume approximately 7% of the energy in the fuel input or 17% of the net power output from the fuel cell system. The bus was built by a number of companies in a project partly financed by the European Commission's Joule programme. The comprehensive testing is partly financed by the Swedish programme "Den Gröna Bilen" (The Green Car). A 50 kW el fuel cell system is the power source and a high voltage battery pack works as an energy buffer and power booster. The fuel, compressed hydrogen, is stored in two high-pressure stainless steel vessels mounted on the roof of the bus. The bus has a series hybrid electric driveline with wheel hub motors with a maximum power of 100 kW. Hybrid Fuel Cell Buses have a big potential, but there are

  4. GeoBus: sharing science research with schools

    Science.gov (United States)

    Roper, Kathryn; Robinson, Ruth; Moorhouse, Ben

    2016-04-01

    GeoBus (www.geobus.org.uk) is an educational outreach project that was developed in 2012 by the Department of Earth and Environmental Sciences at the University of St Andrews, and it is currently sponsored by industry, NERC, The Crown Estate, and the Scottish Government. The aims of GeoBus are to support the teaching of Earth Science in secondary (middle and high) schools by providing teaching support to schools that have little or no experience in teaching this subject. This is, in part, done through the sharing of new science research outcomes and the experiences of young researchers with school pupils to provide a bridge between industry, higher education institutions, research councils and schools. Since its launch, over 40,000 pupils will have been involved in experiential Earth science learning activities in 190 different schools (over 400 separate visits) across the length and breadth of Scotland: many of these schools are in remote and disadvantaged regions. A new GeoBus project is under development within the Department of Earth Sciences at UCL in London. A key aim of GeoBus is to incorporate new research into our workshops with the main challenge being the development of appropriate resources that incorporate the key learning aims and requirements of the science and geography curricula. GeoBus works closely with researchers, teachers and educational practitioners to tailor the research outcomes to the curricula as much as possible. Over the past four years, GeoBus has developed 17 workshops, 5 challenge events and extensive field trips and each of these activities are trialled and evaluated within the university, and adjustments are made before the activities are delivered in schools. Activities are continually reviewed and further developments are made in response to both teacher and pupil feedback. This critical reflection of the project's success and impact is important to insure a positive and significant contribution to the science learning in

  5. Factors influencing students' usage of school bus seat belts: an empirical analysis of the Alabama pilot project.

    Science.gov (United States)

    Lou, Yingyan; Mehta, Gaurav; Turner, Daniel S

    2011-09-01

    The Alabama State Department of Education and the Governor's Study Group on School Bus Seat Belts authorized and funded a research project to investigate the effects of lap-shoulder seat belts on Alabama school buses. This article performs an empirical analysis to address an important component of the study - factors that impact students' decisions about wearing seat belts or not on school buses. Discrete choice modeling framework is applied to quantify relative influences of various factors. To obtain the disaggregate level information on individual student's characteristics and trip properties, a new data collection protocol is developed. Eleven variables are investigated and eight of them are found to have significant impacts. They are age, gender, the home county of a student, a student's trip length, time of day, presence and active involvement of bus aide, and two levels of bus driver involvement. The resulting model fits the data well and reveals several trends that have been overlooked or underestimated in the literature. The model can also be used to predict the change of seat belt usage rate caused by the change of impact factors. This is helpful in identifying the most cost-effective ways to improve compliance rate, which is critical to bring the added safety benefit of seat belts into effect. This article is the first to quantify relative impacts of a range of variables using rigorous statistical modeling techniques. This study will contribute to the literature and provide valuable insights to the practice of school transportation management. Copyright © 2011 Elsevier Ltd. All rights reserved.

  6. Bus Stops Location and Bus Route Planning Using Mean Shift Clustering and Ant Colony in West Jakarta

    Science.gov (United States)

    Supangat, Kenny; Eko Soelistio, Yustinus

    2017-03-01

    Traffic Jam has been a daily problem for people in Jakarta which is one of the busiest city in Indonesia up until now. Even though the official government has tried to reduce the impact of traffic issues by developing a new public transportation which takes up a lot of resources and time, it failed to diminish the problem. The actual concern to this problem actually lies in how people move between places in Jakarta where they always using their own vehicle like cars, and motorcycles that fill most of the street in Jakarta. Among much other public transportations that roams the street of Jakarta, Buses is believed to be an efficient transportation that can move many people at once. However, the location of the bus stop is now have moved to the middle of the main road, and its too far for the nearby residence to access to it. This paper proposes an optimal location of optimal bus stops in West Jakarta that is experimentally proven to have a maximal distance of 350 m. The optimal location is estimated by means of mean shift clustering method while the optimal routes are calculated using Ant Colony algorithm. The bus stops locations rate of error is 0.07% with overall route area of 32 km. Based on our experiments, we believe our proposed bus stop plan can be an interesting alternative to reduce traffic congestion in West Jakarta.

  7. SunLine Transit Agency Advanced Technology Fuel Cell Bus Evaluation: First Results Report

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, L.; Chandler, K.

    2011-03-01

    This report describes operations at SunLine Transit Agency for their newest prototype fuel cell bus and five compressed natural gas (CNG) buses. In May 2010, SunLine began operating its sixth-generation hydrogen fueled bus, an Advanced Technology (AT) fuel cell bus that incorporates the latest design improvements to reduce weight and increase reliability and performance. The agency is collaborating with the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) to evaluate the bus in revenue service. This report provides the early data results and implementation experience of the AT fuel cell bus since it was placed in service.

  8. Stress from an administrative perspective in public transport drivers in Mexico City: Minibus and metrobus

    Directory of Open Access Journals (Sweden)

    Fernando Lámbarry

    2016-04-01

    Full Text Available Stress is one of the occupational diseases that affect workers worldwide, affecting their own productivity and performance (as well as that of the organizations where they work, and even their physical and mental health. According to the International Labour Organization, Mexican workers suffer from stress the most all over the world, since theirs is one of the most stressful professions. With this in mind, the aim of this research is to study the work stress in bus rapid transit drivers and minibus in Mexico City. The method used is based on an exploratory statistical factorial analysis. It is concluded that the factors which a higher influence in the onset of stress are organizational, environmental (physical/individual, inherent to the position, extra organizational and individual. Although divergent among drivers, minibus drivers are the workers who suffer the most from stress.

  9. Economic Impact of the Use of Inertia in an Urban Bus Company

    Directory of Open Access Journals (Sweden)

    Alejandro G. Tuero

    2017-07-01

    Full Text Available Public transport companies face great expenses. In order to be profitable companies, they need to reduce costs in all aspects. In addition, many countries have increased taxes to force transport companies to reduce their fuel consumption and, thus, greenhouse effect emissions. Efficient driving is the cheapest way to achieve this goal. In this paper, we analyze the economic impact of one of the most influential efficient driving techniques in an urban bus company. We calculate the difference of consumption between a well-performed deceleration using the inertia of the vehicle and a loss of speed obtained by using the brakes. For this purpose, we compare a real track performed by any driver in a precise vehicle with a simulated ideal track. To obtain the deceleration of the simulation, we develop a linear regression model on over 170,000 samples captured from the same vehicle over a period of one month. The results show that the costs of the vehicle under test in one month may be reduced by more than 2500 €

  10. Health effect of a bus ride in an urban environment

    Energy Technology Data Exchange (ETDEWEB)

    Takano, T.

    1983-07-01

    Health effects on subjects during a bus drive on an urban road were investigated in a real situation. Leukocyte count, adrenalin level in blood and urine, noradrenalin and dopamine in urine, diastolic blood pressure, and index of vascular resistance increased significantly on the drive day compared with the control day. A bus drive on an urban road induced enhanced sympathetic-adreno-medullary activity in real life as a result of the comprehensive effect of various factors. The concentrations of air pollutants were excessively high on the road, and correlated with traffic volume. It was concluded that the interactions between psychogenic, physical nonspecific and physical specific effects should be taken into consideration when evaluating human health effects of air pollution in the urban environment.

  11. American Fuel Cell Bus Project Evaluation: Third Report

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, Leslie [National Renewable Energy Lab. (NREL), Golden, CO (United States); Post, Matthew [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jeffers, Matthew [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2017-05-01

    This report presents results of the American Fuel Cell Bus (AFCB) Project, a demonstration of fuel cell electric buses operating in the Coachella Valley area of California. The prototype AFCB, which was developed as part of the Federal Transit Administration's (FTA) National Fuel Cell Bus Program, was delivered to SunLine in November 2011 and was put in revenue service in mid-December 2011. Two new AFCBs with an upgraded design were delivered in June/July of 2014 and a third new AFCB was delivered in February 2015. FTA and the AFCB project team are collaborating with the U.S. Department of Energy (DOE) and DOE's National Renewable Energy Laboratory to evaluate the buses in revenue service. This report covers the performance of the AFCBs from July 2015 through December 2016.

  12. Discharging a DC bus capacitor of an electrical converter system

    Science.gov (United States)

    Kajouke, Lateef A; Perisic, Milun; Ransom, Ray M

    2014-10-14

    A system and method of discharging a bus capacitor of a bidirectional matrix converter of a vehicle are presented here. The method begins by electrically shorting the AC interface of the converter after an AC energy source is disconnected from the AC interface. The method continues by arranging a plurality of switching elements of a second energy conversion module into a discharge configuration to establish an electrical current path from a first terminal of an isolation module, through an inductive element, and to a second terminal of the isolation module. The method also modulates a plurality of switching elements of a first energy conversion module, while maintaining the discharge configuration of the second energy conversion module, to at least partially discharge a DC bus capacitor.

  13. Heat storage for a bus petrol internal-combustion engine

    Science.gov (United States)

    Vasiliev, Leonard L.; Burak, Victor S.; Kulakov, Andry G.; Mishkinis, Donatas A.; Bohan, Pavel V.

    The heat storage (HS) system for pre-heating a bus petrol internal combustion engine to starting was mathematically modelled and experimentally investigated. The development of such devices is an extremely urgent problem especially for regions with a cold climate. We discuss how HS works on the effect of absorption and rejection of heat energy at a solid-liquid phase change of a HS substance. In the first part of the paper a numerical method to calculate the HS mass-dimensional parameters and their characteristics are described. In the experimental part of the paper results are given of experiments on the pre-heating device aiding to start a carburettor engine under operational conditions and analysis of data received. Practical confirmation of the theoretical development of HS devices for a bus engine for starting by pre-heating is given.

  14. Sustainable transport and the organisation of bus services in Manchester

    DEFF Research Database (Denmark)

    Gudmundsson, Henrik; Sørensen, Claus Hedegaard

    2008-01-01

    “Sustainable transport” has become a headline for transport planning and policy making around the world. While there are many different definitions of what Sustainable Transport means, it commonly includes efforts to improve the environmental performance of transport systems, and to promote...... depends on how the bus sector is organised. By organisation we adopt an institutional point of view and consider basic modes of governance. Basic modes of governance include the forms “market”, “hierarchy” and “network” (Powell 1990). So-called New Public Management (NPM) reforms have changed the modes......: Public bus transport in England, exemplified by Greater Manchester. England represents a situation where - compared to continental Europe including Denmark - the NPM reforms have been particularly radical. In no other European country the market forces has achieved a role as dominant as in England...

  15. Design Report for Isolated RS-485 Bus Node

    Science.gov (United States)

    2016-07-01

    1.2 Master Control Node The master control node was implemented with a USB to universal asynchronous receiver/transmitter (UART) bridge chip produced...indicate fragment manipulation via calls to public methods. The black arrows in the main activity indicate the fragments requesting action from the...Unplug the universal serial bus (USB) cable from the tablet. 2. Go to Android back stack via button on bottom right and swipe off STSLEDCntrl. 3

  16. BC Transit Fuel Cell Bus Project: Evaluation Results Report

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, L. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Post, M. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2014-02-01

    This report evaluates a fuel cell electric bus demonstration led by British Columbia Transit (BC Transit) in Whistler, Canada. BC Transit is collaborating with the California Air Resources Board and the U.S. Department of Energy's National Renewable Energy Laboratory to evaluate the buses in revenue service. This evaluation report covers two years of revenue service data on the buses from April 2011 through March 2013.

  17. Evaluasi Tingkat Kelelahan Pada Pengemudi Bus Di Kota Bandung

    OpenAIRE

    Febrianti, Asterina; Yassierli, Yassierli; Mahachandra, Manik

    2016-01-01

    Kota Bandung saat ini mengalami pertumbuhan penduduk mencapai 3% setiap tahunnya, sehingga kebutuhan akan transportasi umum sangat tinggi serta tingkat kemacetan yang timbul semakin tinggi pula. Kemacetan yang panjang berdampak pada penurunan kewaspadaan dan timbulnya risiko kecelakaan karena waktu berkendara yang relatif lebih beragam. Menyadari akan risiko kecelakaan yang diakibatkan oleh kelelahan maka diperlukan pengukuran kelelahan pada pengemudi bus di kota Bandung yang belum pernah dik...

  18. City of Chula Vista hydrogen fuel cell bus demonstration project

    Energy Technology Data Exchange (ETDEWEB)

    Gustafson, B.; Bamberger, B.

    1996-10-01

    Hydrogen as an energy carrier and fuel has potential for various uses including electricity, commercial, residential, transportation, and industrial. It is an energy carrier that can be produced from a variety of primary sources and potentially can accomplish these various uses while significantly reducing pollution by substituting for or reducing the use of fossil fuels. One of the most immediate and potentially viable roles for hydrogen as an energy carrier will be its use as a transportation fuel, especially in densely populated urban areas where automotive emissions contribute significantly to air pollution. The Department of Energy`s commitment to research and development of hydrogen as an alternative fuel, and California`s Zero Emission Vehicle (ZEV) requirements, both provide the impetus and favorable circumstance for demonstrating hydrogen as a transportation fuel on an urban bus system. The purpose of this project is to demonstrate the feasibility of using solid polymer fuel cells in a hydrogen-powered electric drive system for an urban transit bus application. Fuel cell buses use hydrogen fuel and oxygen from the air to produce electrical power with the only byproduct being pure water. Proton Exchange Membrane (PEM) fuel cells are proposed for this project. Current evidence suggests that fuel cells, which rely on hydrogen and a process known as proton exchange to generate their power, appear to have an infinite life span. All exhaust pollution is completely eliminated, resulting in a Zero Emission Vehicle (ZEV). An urban bus system offers the potential for developing a market for the production of hydrogen propulsion technology due to extensive vehicular use in densely populated areas experiencing pollution from numerous sources, and because the central garaging facilities or the bus system facilitates fueling and maintenance functions.

  19. Bi-Directional Multi-Station Command/Information Bus

    Science.gov (United States)

    1976-11-01

    signals are presented. The model of the signal flow requirements is presented both schematically and in tabular form From this model, a possible...is presented both in schematic and tabular forms. Finally, a conceptual data bus configura- tion meeting the signal flow requirements has been...A Converter LRI Central Air Dato Computer ’LLI Demultiplexer D/A Converter 0>AI OfA2 Type R Modem Type T Modem A/D Cowerfcr

  20. Optimalisasi Kelembagaan Dan Manajemen Dalam Bus Rapid Transit Semarang

    OpenAIRE

    Ghoni, Ahmad; Yuniar, Haptiwi Tri; Riyanto, Bambang; Supriyono, Supriyono

    2013-01-01

    Bus Rapid Transit Trans Semarang is a means of mass transportation to the transit system that began operating since 2009 as a solution to reduce congestion in the city of Semarang. This research focuses on the optimization and management of institutional BRT Trans Semarang to improve it's performance. The purpose of this study is to optimize the performance of the organization and management of BRT Trans Semarang with variable types of institutional cooperation BRT operations, and leadership...

  1. Effects of biodiesel on emissions of a bus diesel engine

    OpenAIRE

    Kegl, Breda

    2012-01-01

    This paper discusses the influence of biodiesel on the injection, spray, and engine characteristics with the aim to reduce harmful emissions. The considered engine is a bus diesel engine with injection M system. The injection, fuel spray, and engine characteristics, obtained with biodiesel, are compared to those obtained with mineral diesel (D2) under various operating regimes. The considered fuel is neat biodiesel from rapeseed oil. Its density, viscosity, surface tension, and sound velocity...

  2. Experimental investigation review of biodiesel usage in bus diesel engine

    OpenAIRE

    Kegl, Breda; Kegl, Marko

    2017-01-01

    This paper assembles and analyses extensive experimental research work conducted for several years in relation to biodiesel usage in a MAN bus Diesel engine with M injection system. At first the most important properties of the actually used neat rapeseed biodiesel fuel and its blends with mineral diesel are discussed and compared to that of mineral diesel. Then the injection, fuel spray, and engine characteristics for various considered fuel blends are compared at various ambient conditions,...

  3. Should bus commuting be subsidized for providing quality transport ...

    Indian Academy of Sciences (India)

    e-mail: geetamt@gmail.com. Abstract. Urban transport has ... (ii) Should bus prices be subsidized in order to provide a quality public transport system? (iii) How large is the modal shift in favour ..... been derived through a speed-flow relationship function, with a car free flow speed of 45 km/h, peak traffic speed of 24 km/h and ...

  4. Seven Performance Drivers.

    Science.gov (United States)

    Ross, Linda

    2003-01-01

    Recent work with automotive e-commerce clients led to the development of a performance analysis methodology called the Seven Performance Drivers, including: standards, incentives, capacity, knowledge and skill, measurement, feedback, and analysis. This methodology has been highly effective in introducing and implementing performance improvement.…

  5. Beginning teenage drivers

    Science.gov (United States)

    2010-01-01

    Teen drivers have the highest crash risk of any age group. Per mile traveled, they have the highest involvement rates in all types of crashes, from those involving only property damage to those that are fatal. The problem is worst among 16 year-olds,...

  6. Evaluation of fatal school bus related crashes and near-term crash mitigation strategies

    Directory of Open Access Journals (Sweden)

    Kelly Donoughe

    2015-03-01

    Full Text Available School bus crashes are rare in comparison to other crash types, but considering all crashes that occur in and around school buses, they begin to become a noticeable problem and one that tends to attract national attention. As defined by the Fatality Analysis Reporting System (FARS, a school bus related crash is a crash that either involves a school bus or a crash where the presence of a school bus is considered as a major contributing factor. Ten years of data indicate that the number of fatal school bus related crashes has remained nearly stagnant despite an increase in the number vehicle safety systems available on the market. The findings also highlight the importance of protecting the non-bus occupants since they are the most likely to incur a serious or fatal injury in the event of a crash. As the most vulnerable user group, pedestrians (typically school-aged children are especially at risk when crossing the road while boarding or exiting a school bus. Until new technologies for reducing school bus related crashes are designed and implemented, school transportation safety can be improved by increasing awareness of school bus stop laws and by implementing existing transportation safety initiatives at school bus stop locations.

  7. Cellular Automata Based Modeling for Evaluating Different Bus Stop Designs in China

    Directory of Open Access Journals (Sweden)

    Haoyang Ding

    2015-01-01

    Full Text Available A cellular automaton model is proposed to simulate mixed traffic flow composed of motor vehicles and bicycles near bus stops. Three typical types of bus stops which are common in China are considered in the model, including two types of curbside bus stops and one type of bus bay stops. Passenger transport capacity of three types of bus stops, which is applied to evaluate the bus stop design, is calculated based on the corresponding traffic flow rate. According to the simulation results, the flow rates of both motor vehicles and bicycles exhibit phase transition from free flow to the saturation one at the critical point. The results also show that the larger the interaction between motor vehicle and bicycle flow is near curbside bus stops, the more the value of saturated flows drops. Curbside bus stops are more suitable when the conflicts between two flows are small and the inflow rate of motor vehicles is low. On the contrary, bus bay stops should be applied due to their ability to reduce traffic conflicts. Findings of this study can provide useful suggestions on bus stop selection considering different inflow rate of motor vehicles and bicycles simultaneously.

  8. HEV Test Bench Based on CAN Bus Sensor Communication

    Directory of Open Access Journals (Sweden)

    Shupeng ZHAO

    2014-02-01

    Full Text Available The HEV test bench based on Controller Area Network bus was studied and developed. Control system of HEV power test bench used the CAN bus technology. The application of CAN bus technology on control system development has opened up a new research direction for domestic automobile experimental platform. The HEV power control system development work was completed, including power master controller, electric throttle controller, driving simulation platform, CAN2.0 B communication protocol procedures for formulation, CAN communication monitoring system, the simulation model based on MATLAB code automatic generation technology research, etc. Maximum absorption power of the test bench is 90 kW, the test bench top speed is 6000 r/min, the CAN communication data baud rate is 10~500 k, the conventional electric measurement parameter part precision satisfies the requirement of development of HEV. On the HEV test bench the result of regenerative braking experiment shows that the result got by the test bench was closer to the results got by outdoor road test. And the fuel consumption experiment test results show that the HEV fuel consumption and the charge-discharge character are in linear relationship. The establishment of the test platform for the evaluation of the development of hybrid electric vehicle and power provides physical simulation and test platform.

  9. Evaluation of Bus Vibration Comfort Based on Passenger Crowdsourcing Mode

    Directory of Open Access Journals (Sweden)

    Hong Zhao

    2016-01-01

    Full Text Available Vibration comfort is an important factor affecting the quality of service (QoS of bus. In order to make people involved in supervising bus’s vibration comfort and improve passengers’ riding experience, a novel mode of passenger crowdsourcing is introduced. In this paper, comfort degree of bus vibration is calculated from bus’s vibration signals collected by passengers’ smartphones and sent through WiFi to the Boa web server which shows the vibration comfort on the LCD deployed in bus and maybe trigger alarm lamp when the vibration is beyond the threshold. Three challenges here have been overcome: firstly, space coordinate transformation algorithm is used to solve the constant drift of signals collected; secondly, a low-pass filter is designed to isolate gravity from signals real-timely via limited computing resources; thirdly, an embedded evaluation system is developed according to the calculation procedure specified by criterion ISO 2631-1997. Meanwhile, the model proposed is tested in a practical running environment, the vibration data in whole travel are recorded and analyzed offline. The results show that comfort degree of vibration obtained from the experimental system is identical with the truth, and this mode is proved to be effective.

  10. Replacement model of city bus: A dynamic programming approach

    Science.gov (United States)

    Arifin, Dadang; Yusuf, Edhi

    2017-06-01

    This paper aims to develop a replacement model of city bus vehicles operated in Bandung City. This study is driven from real cases encountered by the Damri Company in the efforts to improve services to the public. The replacement model propounds two policy alternatives: First, to maintain or keep the vehicles, and second is to replace them with new ones taking into account operating costs, revenue, salvage value, and acquisition cost of a new vehicle. A deterministic dynamic programming approach is used to solve the model. The optimization process was heuristically executed using empirical data of Perum Damri. The output of the model is to determine the replacement schedule and the best policy if the vehicle has passed the economic life. Based on the results, the technical life of the bus is approximately 20 years old, while the economic life is an average of 9 (nine) years. It means that after the bus is operated for 9 (nine) years, managers should consider the policy of rejuvenation.

  11. An Electric Bus with a Battery Exchange System

    Directory of Open Access Journals (Sweden)

    Jeongyong Kim

    2015-07-01

    Full Text Available As part of the ongoing effort to be independent of petroleum resources and to be free from pollutant emission issues, various electric vehicles have been developed and tested through their integration with real world systems. In the current paper, yet another application specific EV for public transportation, an electric bus, is introduced and explained with results from the pilot test program which was carried out under real traffic conditions. The main feature of the current system is a battery exchanging mechanism mounted on the roof of the bus. The current configuration certainly requires an externally fabricated battery exchanging robot system that would complement the electric bus for a fully automated battery exchanging process. The major advantage of the current system is the quick re-charging of the electric energy through the physical battery exchange and the possible utilization of the battery exchange station as a mini scale energy storage system for grid system peak power shaving. With the total system solution approach for the public transportation system, it is fully expected to create outstanding business opportunities in number of areas such as battery suppliers, battery exchanging station management, battery leasing and many more.

  12. A Dimensional Bus model for integrating clinical and research data.

    Science.gov (United States)

    Wade, Ted D; Hum, Richard C; Murphy, James R

    2011-12-01

    Many clinical research data integration platforms rely on the Entity-Attribute-Value model because of its flexibility, even though it presents problems in query formulation and execution time. The authors sought more balance in these traits. Borrowing concepts from Entity-Attribute-Value and from enterprise data warehousing, the authors designed an alternative called the Dimensional Bus model and used it to integrate electronic medical record, sponsored study, and biorepository data. Each type of observational collection has its own table, and the structure of these tables varies to suit the source data. The observational tables are linked to the Bus, which holds provenance information and links to various classificatory dimensions that amplify the meaning of the data or facilitate its query and exposure management. The authors implemented a Bus-based clinical research data repository with a query system that flexibly manages data access and confidentiality, facilitates catalog search, and readily formulates and compiles complex queries. The design provides a workable way to manage and query mixed schemas in a data warehouse.

  13. Safety evaluation of a hydrogen fueled transit bus

    Energy Technology Data Exchange (ETDEWEB)

    Coutts, D.A.; Thomas, J.K.; Hovis, G.L.; Wu, T.T. [Westinghouse Savannah River Co., Aiken, SC (United States)

    1997-12-31

    Hydrogen fueled vehicle demonstration projects must satisfy management and regulator safety expectations. This is often accomplished using hazard and safety analyses. Such an analysis has been completed to evaluate the safety of the H2Fuel bus to be operated in Augusta, Georgia. The evaluation methods and criteria used reflect the Department of Energy`s graded approach for qualifying and documenting nuclear and chemical facility safety. The work focused on the storage and distribution of hydrogen as the bus motor fuel with emphases on the technical and operational aspects of using metal hydride beds to store hydrogen. The safety evaluation demonstrated that the operation of the H2Fuel bus represents a moderate risk. This is the same risk level determined for operation of conventionally powered transit buses in the United States. By the same criteria, private passenger automobile travel in the United States is considered a high risk. The evaluation also identified several design and operational modifications that resulted in improved safety, operability, and reliability. The hazard assessment methodology used in this project has widespread applicability to other innovative operations and systems, and the techniques can serve as a template for other similar projects.

  14. Perspective Application of Passive Optical Network with Optimized Bus Topology

    Directory of Open Access Journals (Sweden)

    P. Lafata

    2012-06-01

    Full Text Available Passive optical networks (PONs represent a promising solution for modern access telecommunication networks.These networks are able to meet the increasing demands on transmission rate for demanding multimedia services,while they can offer typical shared transmission speed of 1.25 or 2.5 Gbps. The major role in deploying opticaldistribution networks ODNs plays the maximum attenuable loss, which is caused mainly by passive optical splitters.This paper proposes an innovative application of passive optical networks with optimized bus topology especially forlocal backbone data networks. Due to using only passive components, it is necessary to optimize certain parameters,especially an overall attenuation balance. Considering the possibility of such optimization, the passive optical networkwith optimized bus topology provides several interesting opportunities for specific applications. This paper will presentselected aspects of passive optical networks and splitters with asymmetric splitting ratio. The essential part is focusedon the practical demonstration of their use to optimize the passive optical network with bus topology, which acts as alocal backbone network for structured cabling systems, and for local data networks in large buildings.

  15. Identification of voltage stability condition of a power system using measurements of bus variables

    Directory of Open Access Journals (Sweden)

    Durlav Hazarika

    2014-12-01

    Full Text Available Several online methods were proposed for investigating the voltage stability condition of an interconnected power system using the measurements of voltage and current phasors at a bus. For this purpose, phasor measurement units (PMUs are used. A PMU is a device which measures the electrical waves on an electrical network, using a common time source (reference bus for synchronisation. This study proposes a method for online monitoring of voltage stability condition of a power system using measurements of bus variables namely – (i real power, (ii reactive power and (iii bus voltage magnitude at a bus. The measurements of real power, reactive power and bus voltage magnitude could be extracted/captured from a smart energy meter. The financial involvement for implementation of the proposed method would significantly lower compared with the PMU-based method.

  16. Bitmap-Wise Wireless M-Bus Coordination for Sustainable Real Time Energy Management

    Directory of Open Access Journals (Sweden)

    Kwang-il Hwang

    2014-07-01

    Full Text Available Even though WM-Bus is being considered to be the most promising network protocol for smart metering, it is not suitable for a sustainable real-time home energy management system (HEMS, which requires higher reliability and longer lifetime despite real time bi-directional communications. Therefore, in this paper we propose a Bitmap-wise WM-Bus (BWM-Bus, coping well with sustainable real-time HEMS. In particular, the proposed scheme addresses the several problems in WM-Bus for HEMS by introducing novel functions: asynchronous meter trigger, adaptive slot scheduling, and bitmap-wise retransmission request. Through experiments, we demonstrate that BWM-Bus guarantees higher data success ratio with lower data aggregation time, as well as longer lifetime than WM-Bus standard.

  17. Bunching transition in a time-headway model of a bus route.

    Science.gov (United States)

    Nagatani, T

    2001-03-01

    A time-headway model is presented to mimic bus behavior on the bus route. The motion of a bus is described in terms of the time headway between its bus and the bus in front. We study the bunching behavior of buses induced by interacting with other buses and passengers. It is shown that the dynamical phase transitions among the inhomogeneous bunching phase, the homogeneous free phase, the coexisting phase, and the homogeneous congested phase occur with varying the initial time headway. We study the effect of not stopping at bus stops on the time-headway profile. It is found that the bunching transition lines are consistent with the neutral stability curves obtained by the linear stability analysis.

  18. SunLine Transit Agency Advanced Technology Fuel Cell Bus Evaluation: Third Results Reports

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, L.; Chandler, K.

    2012-05-01

    This report describes operations at SunLine Transit Agency for their newest prototype fuel cell bus and five compressed natural gas (CNG) buses. In May 2010, SunLine began operating its sixth-generation hydrogen fueled bus, an Advanced Technology (AT) fuel cell bus that incorporates the latest design improvements to reduce weight and increase reliability and performance. The agency is collaborating with the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) to evaluate the bus in revenue service. NREL has previously published two reports documenting the operation of the fuel cell bus in service. This report provides a summary of the results with a focus on the bus operation from July 2011 through January 2012.

  19. The Association between risk factors and low back pain among commercial vehicle drivers in peninsular Malaysia: a preliminary result.

    Science.gov (United States)

    Tamrin, Shamsul Bahri Mohd; Yokoyama, Kazuhito; Jalaludin, Juliana; Aziz, Nasaruddin Abdul; Jemoin, Nizam; Nordin, Rusli; Li Naing, Ayub; Abdullah, Yunus; Abdullah, Mazlan

    2007-04-01

    To determine the risk factors associated with complain of low back pain. A cross sectional study was done from June 2004 until August 2005. Seven hundred and sixty commercial vehicle drivers from 11 bus companies in central, northern and eastern regions in Malaysia participated in this study. Modified Nordic questionnaire was used to determine the prevalence of low back pain; Maestro human vibration meter was used to measure the personal R.M.S values of lateral, anterior-posterior and vertical axes. Modified Owas was used to assess the awkward posture of the driver torso namely, bending forward movement, leaning, sitting straight and twisting. Profile of Mood States (POMS) was used to evaluate the mood states of bus drivers with complain of low back pain. A high prevalence of low back pain (60.4%) among Malaysian commercial vehicle drivers was found. Logistic regression analysis controlling for age, income, education level and non occupational activities revealed that the following factors were related to low back pain: Tension-anxiety [1.080, 95% CI 1.041-1.121], depression dejection [1.047, 95% CI 1.023-1.072], anger-hostility [1.053, 95% CI 1.027-1.081], fatigue [1.132, 95% CI 1.089-1.177] and confusion [1.114, 95% CI 1.061-1.169] of POMS, length of employment [1.001, 95% CI 1.0-1.003], steering wheel adjustment [1.521, 95% CI 1.101-2.101], perception of exposing to vibration [1.943, 95% CI 1.389-2.719]. In conclusion, combinations of risks lead to high increase of low back pain complain among Malaysian bus drivers.

  20. Optimizing Bus Frequencies under Uncertain Demand: Case Study of the Transit Network in a Developing City

    OpenAIRE

    Huang, Zhengfeng; Ren, Gang; Liu, Haixu

    2013-01-01

    Various factors can make predicting bus passenger demand uncertain. In this study, a bilevel programming model for optimizing bus frequencies based on uncertain bus passenger demand is formulated. There are two terms constituting the upper-level objective. The first is transit network cost, consisting of the passengers’ expected travel time and operating costs, and the second is transit network robustness performance, indicated by the variance in passenger travel time. The second term reflect...

  1. Evaluation of Urban Bus Transport Failure in Gujranwala City of Pakistan

    Directory of Open Access Journals (Sweden)

    MUHAMMAD WAQAR ASLAM

    2017-07-01

    Full Text Available This research work has evaluated the performance of urban public bus transport service operating in Gujranwala city of Pakistan. The assessment has been made in terms of financial viability, bus condition, operational performance and user perception. Based on the data requirements, various traffic/transport surveys were conducted including Passenger Boarding and Alighting Survey, Bus Count Survey, Bus Inspection Survey, Illegal Operations Survey and Public Transport User Interview Survey in consultation with concerned department/agencies. Field surveys were also conducted to get input from passengers and local people. Initial investigation informed that out of four operational bus routes, only two routes are profitable. The overall bus operation is running in loss (only 0.3% net profit. It has barely any profit for the bus operator against its investment thereby making the urban bus operation financially non-viable. The whole revenue flow is dependent on passenger ticketing revenue only. Around 35% of the buses are in poor condition with major issues of quality of tyres, no speedometer, worse condition of seats, floor and ceiling, and display of route. Illegal operation of Qingqis/Rickshaws (as para-transit mode along the bus routes is also decreasing the revenue by capturing the passenger volume. According to passenger opinion analysis, around 55% of the passenger are not satisfied with the service quality and prefer other modes of transport. Their major concerns are absence of facilities for disables and bus stops, bus seating and standing capacity, poor bus condition and pick pocketing. Collectively, these factors are contributing

  2. Automobile Driver Fingerprinting

    Directory of Open Access Journals (Sweden)

    Enev Miro

    2016-01-01

    Full Text Available Today’s automobiles leverage powerful sensors and embedded computers to optimize efficiency, safety, and driver engagement. However the complexity of possible inferences using in-car sensor data is not well understood. While we do not know of attempts by automotive manufacturers or makers of after-market components (like insurance dongles to violate privacy, a key question we ask is: could they (or their collection and later accidental leaks of data violate a driver’s privacy? In the present study, we experimentally investigate the potential to identify individuals using sensor data snippets of their natural driving behavior. More specifically we record the in-vehicle sensor data on the controllerarea- network (CAN of a typical modern vehicle (popular 2009 sedan as each of 15 participants (a performed a series of maneuvers in an isolated parking lot, and (b drove the vehicle in traffic along a defined ~ 50 mile loop through the Seattle metropolitan area. We then split the data into training and testing sets, train an ensemble of classifiers, and evaluate identification accuracy of test data queries by looking at the highest voted candidate when considering all possible one-vs-one comparisons. Our results indicate that, at least among small sets, drivers are indeed distinguishable using only incar sensors. In particular, we find that it is possible to differentiate our 15 drivers with 100% accuracy when training with all of the available sensors using 90% of driving data from each person. Furthermore, it is possible to reach high identification rates using less than 8 minutes of training data. When more training data is available it is possible to reach very high identification using only a single sensor (e.g., the brake pedal. As an extension, we also demonstrate the feasibility of performing driver identification across multiple days of data collection

  3. Drivers, Trends and Mitigation

    Energy Technology Data Exchange (ETDEWEB)

    Blanco, Arthur S.; Gerlagh, Reyer; Suh, Sangwon; Barrett, John A.; de Coninck, Heleen; Diaz Morejon, Cristobal Felix; Mathur, Ritu; Nakicenovic, Nebojsa; Ahenkorah, Alfred Ofosu; Pan, Jiahua; Pathak, Himanshu; Rice, Jake; Richels, Richard G.; Smith, Steven J.; Stern, David; Toth, Ferenc L.; Zhou, Peter

    2014-12-01

    Chapter 5 analyzes the anthropogenic greenhouse gas (GHG) emission trends until the present and the main drivers that explain those trends. The chapter uses different perspectives to analyze past GHG-emissions trends, including aggregate emissions flows and per capita emissions, cumulative emissions, sectoral emissions, and territory-based vs. consumption-based emissions. In all cases, global and regional trends are analyzed. Where appropriate, the emission trends are contextualized with long-term historic developments in GHG emissions extending back to 1750.

  4. Driver feedback mobile APP

    Energy Technology Data Exchange (ETDEWEB)

    Soriguera Marti, F.; Miralles Miquel, E.

    2016-07-01

    This paper faces the human factor in driving and its consequences for road safety. It presents the concepts behind the development of a smartphone app capable of evaluating drivers’ performance. The app provides feedback to the driver in terms of a grade (between 0 and 10) depending on the aggressiveness and risks taken while driving. These are computed from the cumulative probability distribution function of the jerks (i.e. the time derivative of acceleration), which are measured using the smartphones’ accelerometer. Different driving contexts (e.g. urban, freeway, congestion, etc.) are identified applying cluster analysis to the measurements, and treated independently. Using regression analysis, the aggressiveness indicator is related to the drivers' safety records and to the probability of having an accident, through the standard DBQ - Driving Behavior Questionnaire. Results from a very limited pilot test show a strong correlation between the 99th percentile of the jerk measurements and the DBQ results. A linear model is fitted. This allows quantifying the safe driving behavior only from smartphone measurements. Finally, this indicator is translated into a normalized grade and feedback to the driver. This feedback will challenge the driver to train and to improve his performance. The phone will be blocked while driving and will incorporate mechanisms to prevent bad practices, like competition in aggressive driving. The app is intended to contribute to the improvement of road safety, one of the major public health problems, by tackling the human factor which is the trigger of the vast majority of traffic accidents. Making explicit and quantifying risky behaviors is the first step towards a safer driving. (Author)

  5. Drivers of Collaborative Advantage

    DEFF Research Database (Denmark)

    Weihe, Gudrid

    processes and behavioural dimensions is practically non-existent. This article tries to remedy the current gap in the literature by reviewing research findings on interfirm collaboration (alliances). On that basis a conceptual framework for analyzing partnership processes is developed. Finally......, the antecedents of collaborative advantage are theoretically examined, and the organizational competences contributing to collaborative success are identified. The conclusion is that operational processes and social dynamics are vital drivers of collaborative advantage. Another significant conclusion...

  6. Education and driver-training

    Directory of Open Access Journals (Sweden)

    Andrej Justinek

    1999-12-01

    Full Text Available The characteristics of the driver are manifested in his/her behaviour. For safe driving one must have a driver's knowledge. The contents of educational material are determined by law, and are both theoretical and practical, yet frequently they do not suffice to meet the requirements of safe driving. In this paper, the author suggests that, in the training of drivers, more educational elements should be included, such a would have  an effective influence on the driver's moti ves and attitudes. The driver's motives - which may result in incorrect driving­ are diverse: most often, the default is overspeeding, even though the drivers always over-estimate the potential time gain. In fact, over-fast driving is a way of satisfying other, different needs; and, above all, it is a form of compensation for unsettled life problems, and at the same time an indication of the driver's personal inability to cope with stress.

  7. Sleepiness of occupational drivers.

    Science.gov (United States)

    Philip, Pierre

    2005-01-01

    Drowsiness and sleeping at the wheel are now identified as the reasons behind fatal crashes and highway accidents caused by occupational drivers. For many years, fatigue has been associated to risk of accidents but the causes of this symptom were unclear. Extensive or nocturnal driving was associated to accidents but few reports differentiated fatigue from sleepiness. In the early nineties, epidemiological data started investigating sleepiness and sleep deprivation as cause of accidents. Sleepiness at the wheel, sleep restriction and nocturnal driving have been incriminated in 20% of traffic accidents. Drugs affecting the central nervous system (i.e., narcotic analgesics, antihistamine drugs), nocturnal breathing disorders and narcolepsy have been also associated with an increasing risk of accidents. Treatments improving daytime vigilance (i.e., nasal Continuous Positive Airway Pressure) reduce significantly the risk of traffic accidents for a reasonable economical cost. Sleep disorders among occupational drivers need to be systematically investigated. Chronic daytime sleepiness is still under diagnosed and sleep disorders (i.e. obstructive sleep apnea syndrome) are not enough explored and treated in this exposed population of sedentary males. Drivers education and work schedules integrating notions of sleep hygiene as well as promotion of sleep medicine could significantly improve road safety.

  8. A Prediction System Using a P2P Overlay Network for a Bus Arrival System

    Directory of Open Access Journals (Sweden)

    Ssu-Hsuan Lu

    2014-01-01

    Full Text Available Along with the evolution of times and the surge of metropolitan populations, government agencies often promote the construction of public transport. Unlike rail transportation or rapid transit systems, it is often difficult to estimate the vehicle arrival times at each station in a bus transportation system due to metropolitan transportation congestion. Traffic status is often monitored using wireless sensor networks (WSNs. However, WSNs are always separated from one another spatially. Recent studies have considered the connection of multiple sensor networks. This study considers a combination view of peer-to-peer (P2P overlay networks and WSN architecture to predict bus arrival times. Each bus station, which is also a P2P overlay peer, is connected in a P2P overlay network. A sensor installed in each bus can receive data via peers to obtain the moving speed of a bus. Then, each peer can exchange its data to predict bus arrival times at bus stations. This method can considerably increase the accuracy with which bus arrival times can be predicted and can provide traffic status with high precision. Furthermore, these data can also be used to plan new bus routes according to the information gathered.

  9. Development and Evaluation of Bus Operation Control System Based on Cooperative Speed Guidance

    Directory of Open Access Journals (Sweden)

    Jing Teng

    2015-01-01

    Full Text Available Buses often have strong bunching or large interval tendency when traveling further along the route. To restrain this further deterioration of operation service, this paper developed a bus operation control system to dynamically adjust bus speed, bus dwell time, and traffic signal timings along the running path. In addition, a simulation platform was developed to evaluate the proposed control system with the actual data collected from bus route number 210 in Shanghai. The simulation results show that the proposed control system can mitigate the amplification trend of the headway deviation along the route to produce headways within a given tolerance.

  10. Massachusetts Fuel Cell Bus Project: Demonstrating a Total Transit Solution for Fuel Cell Electric Buses in Boston

    Energy Technology Data Exchange (ETDEWEB)

    2017-05-22

    The Federal Transit Administration's National Fuel Cell Bus Program focuses on developing commercially viable fuel cell bus technologies. Nuvera is leading the Massachusetts Fuel Cell Bus project to demonstrate a complete transit solution for fuel cell electric buses that includes one bus and an on-site hydrogen generation station for the Massachusetts Bay Transportation Authority (MBTA). A team consisting of ElDorado National, BAE Systems, and Ballard Power Systems built the fuel cell electric bus, and Nuvera is providing its PowerTap on-site hydrogen generator to provide fuel for the bus.

  11. Physics Bus: An Innovative Model for Public Engagement

    Science.gov (United States)

    Fox, Claire

    The Physics Bus is about doing science for fun. It is an innovative model for science outreach whose mission is to awaken joy and excitement in physics for all ages and walks of life - especially those underserved by science enrichment. It is a mobile exhibition of upcycled appliances-reimagined by kids-that showcase captivating physics phenomena. Inside our spaceship-themed school bus, visitors will find: a microwave ionized-gas disco-party, fog rings that shoot from a wheelbarrow tire, a tv whose electron beam is controlled by a toy keyboard, and over 20 other themed exhibits. The Physics Bus serves a wide range of public in diverse locations from local neighborhoods, urban parks and rural schools, to cross-country destinations. Its approachable, friendly and relaxed environment allows for self-paced and self-directed interactions, providing a positive and engaging experience with science. We believe that this environment enriches lives and inspires people. In this presentation we will talk about the nuts and bolts that make this model work, how the project got started, and the resources that keep it going. We will talk about the advantages of being a grassroots and community-based organization, and how programs like this can best interface with universities. We will explain the benefits of focusing on direct interactions and why our model avoids ``teaching'' physics content with words. Situating our approach within a body of research on the value of informal science we will discuss our success in capturing and engaging our audience. By the end of this presentation we hope to broaden your perception of what makes a successful outreach program and encourage you to value and support alternative outreach models such as this one. In Collaboration with: Eva Luna, Cornell University; Erik Herman, Cornell University; Christopher Bell, Ithaca City School District.

  12. BC Transit Fuel Cell Bus Project Evaluation Results: Second Report

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, L.; Post, M.

    2014-09-01

    Second report evaluating a fuel cell electric bus (FCEB) demonstration led by British Columbia Transit (BC Transit) in Whistler, Canada. BC Transit is collaborating with the California Air Resources Board and the U.S. Department of Energy's National Renewable Energy Laboratory to evaluate the buses in revenue service. NREL published its first report on the demonstration in February 2014. This report is an update to the previous report; it covers 3 full years of revenue service data on the buses from April 2011 through March 2014 and focuses on the final experiences and lessons learned.

  13. King County Metro Battery Electric Bus Demonstration: Preliminary Project Results

    Energy Technology Data Exchange (ETDEWEB)

    2017-05-22

    The U.S. Federal Transit Administration (FTA) funds a variety of research projects that support the commercialization of zero-emission bus technology. To evaluate projects funded through these programs, FTA has enlisted the help of the National Renewable Energy Laboratory (NREL) to conduct third-party evaluations of the technologies deployed under the FTA programs. NREL works with the selected agencies to evaluate the performance of the zero-emission buses compared to baseline conventional buses in similar service. The evaluation effort will advance the knowledge base of zero-emission technologies in transit bus applications and provide 'lessons learned' to aid other fleets in incrementally introducing next generation zero-emission buses into their operations. This report provides preliminary performance evaluation results from a demonstration of three zero-emission battery electric buses at King County Metro in King County, Washington. NREL developed this preliminary results report to quickly disseminate evaluation results to stakeholders. Detailed evaluation results will be published in future reports.

  14. Operational efficiency of the lighting system of bus salons

    Directory of Open Access Journals (Sweden)

    Brytkovskyi V.M.

    2016-08-01

    Full Text Available In recent years the problem of safety of people is studied primarily in aspects of natural and man-made disasters, fire, health and safety in the workplace. A problem connected with the way of life of the people, in particular with the use of bus transport remains almost out of sight. In addition to the foregoing, there is another side to the issue: modern development of industry and transport is characterized by large-scale introduction of technical measures aimed at saving energy In the specified aspect theoretical dependences for evaluation of technological economic efficiency of light sources in indoor lighting system buses are grounded. This theoretical dependency will make analytical framework justification applying the respective sources of light, taking into account the hygiene requirements to illumination. The methodology of calculation of economic efficiency of lighting of bus salons is offered. Estimating parameter is justified relative objective function value costs per unit of time or distance. The greatest costs are typical for lamps with incandescent bulbs. The least is common to lamps with fluorescent lamps. Led bulbs have no significant advantage even over incandescent lamps. The reason for this is the relatively high color temperature radiation of LED lamps that requires more light levels and, consequently, the high cost of energy, as well as relatively large initial cost of these lamps.

  15. The school bus routing and scheduling problem with transfers.

    Science.gov (United States)

    Bögl, Michael; Doerner, Karl F; Parragh, Sophie N

    2015-03-01

    In this article, we study the school bus routing and scheduling problem with transfers arising in the field of nonperiodic public transportation systems. It deals with the transportation of pupils from home to their school in the morning taking the possibility that pupils may change buses into account. Allowing transfers has several consequences. On the one hand, it allows more flexibility in the bus network structure and can, therefore, help to reduce operating costs. On the other hand, transfers have an impact on the service level: the perceived service quality is lower due to the existence of transfers; however, at the same time, user ride times may be reduced and, thus, transfers may also have a positive impact on service quality. The main objective is the minimization of the total operating costs. We develop a heuristic solution framework to solve this problem and compare it with two solution concepts that do not consider transfers. The impact of transfers on the service level in terms of time loss (or user ride time) and the number of transfers is analyzed. Our results show that allowing transfers reduces total operating costs significantly while average and maximum user ride times are comparable to solutions without transfers. © 2015 Wiley Periodicals, Inc. NETWORKS, Vol. 65(2), 180-203 2015.

  16. CERPEN FARUK “BUS KOTA” DALAM SEMIOTIK ROLAND BARTHES

    Directory of Open Access Journals (Sweden)

    Ken Widyatwati

    2016-04-01

    Full Text Available Literature called beautiful if it contains the mandate, message, ideas and meanings that are useful for the readers. Short story “Bus Kota” (City Bus containing the mandate, message, ideas and meanings that are useful to the reader. The mandate will be revealed by Roland Barthes' semiotic theory in the book S/Z. Literature has its own allure and text have accrued but not due to independence because of the difference in quality. Texts merge into a unity, or restore any text not as an individual but as a form of plurality. Literature as part of a social system is an expression of the author's sense of the outpouring of public life. Literary works can express themselves in the author's view the social and cultural changes in society because of the development of information technology and rapid. Technological developments and socio-cultural information can change in society so as to affect the psychology of the people. Society must have a thickness of faith not only for themselves, but to be able to maintain equanimity in the life of a pluralistic society

  17. Bus Implementation Using New Low Power PFSCL Tristate Buffers

    Directory of Open Access Journals (Sweden)

    Neeta Pandey

    2016-01-01

    Full Text Available This paper proposes new positive feedback source coupled logic (PFSCL tristate buffers suited to bus applications. The proposed buffers use switch to attain high impedance state and modify the load or the current source section. An interesting consequence of this is overall reduction in the power consumption. The proposed tristate buffers consume half the power compared to the available switch based counterpart. The issues with available PFSCL tristate buffers based bus implementation are identified and benefits of employing the proposed tristate buffer topologies are put forward. SPICE simulation results using TSMC 180 nm CMOS technology parameters are included to support the theoretical formulations. The performance of proposed tristate buffer topologies is examined on the basis of propagation delay, output enable time, and power consumption. It is found that one of the proposed tristate buffer topology outperforms the others in terms of all the performance parameters. An examination of behavior of available and the proposed PFSCL tristate buffer topologies under parameter variations and mismatch shows a maximum variation of 14%.

  18. Studying customer loyalty at Daewoo express bus service, Pakistan

    Directory of Open Access Journals (Sweden)

    Usman Yousaf

    2013-09-01

    Full Text Available Background: Meeting service quality standards and striving for loyalty are two critical areas which have until now been overlooked by both the passenger transport industry and academia in Pakistan therefore the study sheds useful light on an issue hitherto untouched. Therefore increased sample size will help in increasing generalizability of study. Methods: This paper is designed to study the level of loyalty at Daewoo Express Bus Service in Sargodha by measuring customer satisfaction. Researchers used a small sample of only 96 respondents (passengers and only studies customer's behavior in the service quality of Daewoo Express Bus Service however it may differ in other passenger transport services. Results and conclusions: This paper reveals that there is a positive and significant relationship between loyalty (dependant variable and price perceptions, reliability, retrieving and smoothing (independent variables. However, the study found that reliability of services is the most important dimension among other independent variables (price perceptions, smoothing, reliability, retrieving effecting customers loyalty at Daewoo Express. Paper under consideration would surely assist Daewoo`s management team to take care of the loopholes existing in the current service level and likely threats which Daewoo might face.

  19. Efficiency and robustness of different bus network designs

    Science.gov (United States)

    Pang, John Zhen Fu; Bin Othman, Nasri; Ng, Keng Meng; Monterola, Christopher

    2015-07-01

    We compare the efficiencies and robustness of four transport networks that can be possibly formed as a result of deliberate city planning. The networks are constructed based on their spatial resemblance to the cities of Manhattan (lattice), Sudan (random), Beijing (single-blob) and Greater Cairo (dual-blob). For a given type, a genetic algorithm is employed to obtain an optimized set of the bus routes. We then simulate how commuter travels using Yen's algorithms for k shortest paths on an adjacency matrix. The cost of traveling such as walking between stations is captured by varying the weighted sums of matrices. We also consider the number of transfers a posteriori by looking at the computed shortest paths. With consideration to distances via radius of gyration, redundancies of travel and number of bus transfers, our simulations indicate that random and dual-blob are more efficient than single-blob and lattice networks. Moreover, dual-blob type is least robust when node removals are targeted but is most resilient when node failures are random. The work hopes to guide and provide technical perspectives on how geospatial distribution of a city limits the optimality of transport designs.

  20. MANAJEMEN RISIKO DAN KINERJA LABA : STUDI KASUS PADA BANK UMUM SYARIAH (BUS)

    OpenAIRE

    -, RAHMAT NURUL PRIMA. N

    2016-01-01

    2016 Manajemen Risiko dan Kinerja Laba : Studi Kasus Pada Bank Umum Syariah (BUS) Rahmat Nurul Prima Muhammad Sobarsyah Nur Alamsyah Penelitian ini bertujuan untuk menguji pengaruh implementasi manajemen risiko terhadap kinerja laba pada bank umum syariah (BUS) yang diproksikan dengan ROE. Spektrum implementasi manajemen risiko yang dijadikan objek penelitian adalah risiko kredit yang diproksikan dengan NPF, risiko likuiditas yang diproksikan dengan F...

  1. Evoking Emotions and Unpacking Layered Histories through Young Children's Illustrations of Racial Bus Segregation

    Science.gov (United States)

    Kuby, Candace R.

    2013-01-01

    Drawing on theories of multi-modality and critical visual literacy, this article focuses on images that five-and six year-olds painted in a class-made book, Voice on the Bus, about racial segregation. The article discusses how children used illustrations to convey their understandings of Rosa Parks' bus arrest in Alabama. A post-structural view…

  2. Split, Send, Reassemble: A Formal Specification of a CAN Bus Protocol Stack

    OpenAIRE

    van Glabbeek, Rob; Höfner, Peter

    2017-01-01

    We present a formal model for a fragmentation and a reassembly protocol running on top of the standardised CAN bus, which is widely used in automotive and aerospace applications. Although the CAN bus comes with an in-built mechanism for prioritisation, we argue that this is not sufficient and provide another protocol to overcome this shortcoming.

  3. Desain Dan Implementasi Sistem Komunikasi Prosesor Parallel Pada Aplikasi Robotik Berbasis Bus Serial I2C

    OpenAIRE

    Mubarak, Tito; Sumaryo, Sony; Abdurohman, Maman

    2008-01-01

    Dewasa ini desain sistem embedded tidak cukup lagi hanya dengan menerapkan satu buahmicroprocessor atau microcontroller saja. Karena sistem yang dikontrol mempunyai peralatan dan tugas yangsemakin banyak. Sehingga perlu menerapkan desentralisasi dan paralelisme pada sistem berbasismicroprocessor.Pada Penelitian ini, dirancang suatu sistem komunikasi antar microcontroller sebagai implementasi darimicroprocessor. Yaitu berupa suatu sistem bus yang berbasis pada I2C serial bus yang dikeluarkan o...

  4. Successfulness of bus rapid transit systems in Asia. Ex-post evaluation

    NARCIS (Netherlands)

    Kogdenko, Nadja

    2010-01-01

    SUMMARY Bus Rapid Transit (BRT) can be defined as “a bus-based mass transit system that delivers fast, comfortable, and cost-effective urban mobility”. It offers the opportunity to create a high-quality mass transit system at affordable costs, which is p

  5. Telemetry Standards, RCC Standard 106-17. Chapter 8. Digital Data Bus Acquisition Formatting Standard

    Science.gov (United States)

    2017-07-01

    generated for the resulting formatted word or an additional bit appended to the bus/group identification label as described in Paragraph 8.2.3. 8.2.3...shall be identical to that described in Paragraph 8.2. (5) The frame length shall be fixed and shall be the same for each track used for a given bus

  6. 75 FR 71792 - National Express Corporation-Control Exemption-Vogel Bus Company, Inc.

    Science.gov (United States)

    2010-11-24

    ... passenger carrier (MC-274520). NEC indirectly owns and controls one interstate motor passenger carrier... Surface Transportation Board National Express Corporation--Control Exemption--Vogel Bus Company, Inc... approval requirements of 49 U.S.C. 14303(a)(5) and 49 CFR 1182 to acquire control of Vogel Bus Company, Inc...

  7. Bus Operation Monitoring Oriented Public Transit Travel Index System and Calculation Models

    Directory of Open Access Journals (Sweden)

    Jiancheng Weng

    2013-01-01

    Full Text Available This study proposed a two-dimensional index system which is concerned essentially with urban travel based on travel modes and user satisfaction. First, the public transit was taken as an example to describe the index system establishing process. In consideration of convenience, rapid, reliability, comfort, and safety, a bus service evaluation index system was established. The indicators include the N-minute coverage of bus stops, average travel speed, and fluctuation of travel time between stops and bus load factor which could intuitively describe the characteristics of public transport selected to calculate bus travel indexes. Then, combined with the basic indicators, the calculation models of Convenience Index (CI, Rapid Index (RI, Reliability Index (RBI, and Comfort Index (CTI were established based on the multisource data of public transit including the real-time bus GPS data and passenger IC card data. Finally, a case study of Beijing bus operation evaluation and analysis was conducted by taking real bus operation data including GPS data and passenger transaction recorder (IC card data. The results showed that the operation condition of the public transit was well reflected and scientifically classified by the bus travel index models.

  8. Drive Cycle Analysis, Measurement of Emissions and Fuel Consumption of a PHEV School Bus: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Barnitt, R.; Gonder, J.

    2011-04-01

    The National Renewable Energy Laboratory (NREL) collected and analyzed real-world school bus drive cycle data and selected similar standard drive cycles for testing on a chassis dynamometer. NREL tested a first-generation plug-in hybrid electric vehicle (PHEV) school bus equipped with a 6.4L engine and an Enova PHEV drive system comprising a 25-kW/80 kW (continuous/peak) motor and a 370-volt lithium ion battery pack. A Bluebird 7.2L conventional school bus was also tested. Both vehicles were tested over three different drive cycles to capture a range of driving activity. PHEV fuel savings in charge-depleting (CD) mode ranged from slightly more than 30% to a little over 50%. However, the larger fuel savings lasted over a shorter driving distance, as the fully charged PHEV school bus would initially operate in CD mode for some distance, then in a transitional mode, and finally in a charge-sustaining (CS) mode for continued driving. The test results indicate that a PHEV school bus can achieve significant fuel savings during CD operation relative to a conventional bus. In CS mode, the tested bus showed small fuel savings and somewhat higher nitrogen oxide (NOx) emissions than the baseline comparison bus.

  9. Work stress related lipid disorders and arterial hypertension in professional drivers: A cross-sectional study

    Directory of Open Access Journals (Sweden)

    Đinđić Nataša

    2013-01-01

    Full Text Available Background/Aim. Occupational stress is a term used to define ongoing stress that is related to the workplace. The study was conducted to determine association of occupational stress index (OSI and its aspects with arterial hypertension and lipid disorders using data from a cross-sectional survey of male professional drivers. Methods. The cross-sectional study was performed in 439 professional drivers divided into groups (city- and intercity bus drivers, truck and taxi drivers. The OSI and OSI aspects (high demands, strictness, underload, extrinsic time pressure, noxious exposure, avoidance and conflict were calculated using the standardized questionnaire. Determination of serum lipids, blood pressure (BP and cardiovascular risk factors were done. Results. A significant difference in prevalence of diagnosed hypertension and dyslipidemia was found along with a difference in total OSI and OSI aspects among examined subgroups of drivers. A total OSI was highest in city, high in intercity bus drivers, and the lowest one in truck and taxi drivers (82.79 ± 3.5, 81.28 ± 3.7, 73.75 ± 3.5, 71.61 ± 4.4, respectively; p < 0.01. Similar pattern showed triglycerides (TG, total cholesterol (TC and LDL cholesterol and BP, while HDL-cholesterol showed reverse order (p < 0.01. Logistic regression analyses with multiple OSI aspects adjusted for age and years of exposure showed associations of total OSI with arterial hypertension [OR 5.5; 95% CI (2.24-7.95] and dyslipidemia [OR 1.43 95% CI (1.09-2.80]. Underload was the most important OSI aspect associated with the arterial hypertension [OR 1.18; 95% CI (1.04-2.58] and elevated LDL cholesterol [1.26; 95 CI (1.19-2.1]. A total OSI had a significant association with elevated LDL cholesterol [2.64; 95% CI (1.19- 7.7], triglycerides [OR 3.27; 95% CI (1.20-5.1] and low HDL cholesterol [OR 3.29; 95% CI (1.8-5.8] (p < 0.01. Conclusion. The study provides the evidence for the significant association of total OSI and

  10. Development of bus-stop time models in dense urban areas : a case study in Washington DC.

    Science.gov (United States)

    2015-08-01

    Bus transit reliability depends on several factors including the route of travel, traffic conditions, time of day, and conditions at : the bus stops along the route. The number of passengers alighting or boarding, fare payment method, dwell time (DT)...

  11. A Study of BUS Architecture Design for Controller of Nuclear Power Plant Using FPGA

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Dongil; Yun, Donghwa; Hwang, Sungjae; Kim, Myeongyun; Lee, Dongyun [PONUTech Co. Ltd., Seoul (Korea, Republic of)

    2014-05-15

    CPU (Central Processing Unit) operating speed and communication rate have been more technically improved than before. However, whole system is been a degradation of performance by electronic and structural limitation of parallel bus. Transmission quantity and speed have a limit and need arbiter in order to do arbitration because several boards shared parallel bus. Arbiter is a high complexity in implementing so it increases component per chip. If a parallel bus uses, it will occurs some problems what are reflection noise, power/ground noise (or ground bounce) as SSN (Simultaneous Switching Noise) and crosstalk noise like magnetic coupling. In this paper, in order to solve a problem of parallel bus in controller of NPP (Nuclear Power Plant), proposes the bus architecture design using FPGA (Field Programmable Gate Array) based on LVDS (Low Voltage Differential Signaling)

  12. Computation on Bus Delay at Stops in Beijing through Statistical Analysis

    Directory of Open Access Journals (Sweden)

    Shaokuan Chen

    2013-01-01

    Full Text Available Delays at bus stops have seriously affected the efficiency of bus operation and the improvement of level of services of public transportation and greatly influenced the preferences of passengers to choose bus services. In this paper, the analysis on arriving, dwell and leaving process of buses and the method to calculate bus delays at stops are proposed according to survey data from three bus routes in Beijing. Statistical analysis is then adopted respectively to evaluate average times that buses are docking at curbside and bay-style stops. Moreover, it is noted that different load factors of passengers in buses have significantly influenced the average boarding and alighting time per person. The effectiveness and accuracy of the proposed methods is illustrated through case studies. This study is crucial and helpful for the planners and operators to evaluate the efficiency and level of service of urban public transportation.

  13. SunLine Transit Agency Advanced Technology Fuel Cell Bus Evaluation: Second Results Report and Appendices

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, L.; Chandler, K.

    2011-10-01

    This report describes operations at SunLine Transit Agency for their newest prototype fuel cell bus and five compressed natural gas (CNG) buses. In May 2010, SunLine began operating its sixth-generation hydrogen fueled bus, an Advanced Technology (AT) fuel cell bus that incorporates the latest design improvements to reduce weight and increase reliability and performance. The agency is collaborating with the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) to evaluate the bus in revenue service. This is the second results report for the AT fuel cell bus since it was placed in service, and it focuses on the newest data analysis and lessons learned since the previous report. The appendices, referenced in the main report, provide the full background for the evaluation. They will be updated as new information is collected but will contain the original background material from the first report.

  14. Motorcoach Driver Fatigue Study, 2011

    Science.gov (United States)

    2012-12-01

    Eighty-four commercial motorcoach drivers participated in a month-long study of duty start time, total duty time, total sleep time per 24 hours, with sleepiness, fatigue, and performance measured as they were going on and off duty. Drivers worked the...

  15. Novel low cost standardized Nano-Satellite structure bus for LEO missions

    Science.gov (United States)

    Anubhav, T.; Sarwesh, P.; Narayan, V.; Varma, P. A.; Prasad, R. A.; Loganathan, M.; Rao, D. N.; Sriram, S.; Venkatesh, M.

    This paper focuses on SRMSAT STRUCTURE BUS which is a standardized Nano-Satellite structure bus. It provides a standard platform for a wide variety of missions in LEO and can be realized in a very short developmental period. The bus was designed and developed for SRMSAT, the SRM University (Sri Ramaswamy Memorial University) student Nano-Satellite, by the undergraduate students and faculty of SRM University in collaboration with Indian Space Research Organization (ISRO). The bus can support payloads up to a mass of 20kg. SRMSAT STRUCTURE BUS has a mass of around 6 kg and dimensions 280mm × 280mm × 280mm with an available volume of 11000 cc. Vibration Testing of the bus has been performed upto 6.7 gRMS. This makes the satellite capable of being launched by any launch vehicle in the world. An innovative PCB mounting design has been introduced in this structure bus which facilitates mounting of a maximum 7 PCB trays independently, each tray capable of holding a 250 mm2 PCB. Structural analysis of SRMSAT STRUCTURE BUS was done using NX Nastran. The boundary conditions for each analysis were defined based on the loading conditions as specified by the launcher, PSLV (Polar Satellite Launch Vehicle). Optimization of each individual component was performed by maintaining a minimum threshold between the local frequencies of the component and global frequencies of the entire satellite. Static, Modal, Harmonic and Random Vibration analysis of the structure bus was performed. This paper also describes the methodology followed in the static and dynamic analysis of the structure bus to finalize the design. The results have been tested and validated at ISRO Satellite Centre, Bangalore with around 90% accuracy and the structure has been certified as a standard structure bus for Nano-satellite missions. In terms of expandability, this structure bus is capable of accommodating deployable solar panels. Also, the payload mounting is not only restricted to th- bottom deck but can

  16. FAKTOR PENYEBAB KERUSAKAN SISTEM MESIN PADA BUS APTB PPD

    Directory of Open Access Journals (Sweden)

    Laela Chairani

    2015-06-01

    Full Text Available Comfort and safety of public transportation, particularly APTB PPD buses, becomes high expectations for its customers. Those expectations must be supported by the application of a good engine maintenance system. By using the method of Reliability Centered Maintenance may be determined appropriate actions to mitigate damage. From the analysis known the failures of the APTB PPD bus are malfunctions of the fuel engine, power transfer systems, difficulty to move the gear lever, and lubricating system for the rough engine noise. The cause of engine malfunction is dirty diesel filter, vehicle acceleration malfunction is due to the clutch plate wear out. Difficulty to move the gear lever indicates that the clutch slips. Rough engine noise caused by the flow of oil to the engine stalled as the result of dirty oil filter. The results of the logic tree analysis show that for each failure requires scheduling of time directed task.

  17. Foothill Transit Battery Electric Bus Demonstration Results: Second Report

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, Leslie [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jeffers, Matthew [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2017-06-28

    This report summarizes results of a battery electric bus (BEB) evaluation at Foothill Transit, located in the San Gabriel and Pomona Valley region of Los Angeles County, California. Foothill Transit is collaborating with the California Air Resources Board and the U.S. Department of Energy's (DOE's) National Renewable Energy Laboratory to evaluate its fleet of Proterra BEBs in revenue service. The focus of this evaluation is to compare performance of the BEBs to that of conventional technology and to track progress over time toward meeting performance targets. This project has also provided an opportunity for DOE to conduct a detailed evaluation of the BEBs and charging infrastructure. This is the second report summarizing the results of the BEB demonstration at Foothill Transit and it provides data on the buses from August 2015 through December 2016. Data are provided on a selection of compressed natural gas buses as a baseline comparison.

  18. Application of gravity model on the Korean urban bus network

    Science.gov (United States)

    Hong, Inho; Jung, Woo-Sung

    2016-11-01

    Mobility models have been studied to describe the underlying mechanism of human mobility. The mobility patterns in various transportation systems were understood with the gravity model by estimating the traffic as a simple function of population and distance. Compared to most studies on large-scale systems, we focused on the validity and characteristics of gravity model for intraurban mobility. Several variations of gravity model are applied on the urban bus systems of five medium-sized cities in Korea. The gravity model successfully estimates the intraurban traffic without universal exponents for cities. From the change of exponents by predictor types, we figure out the effect by a non-trivial relation between traffic and population in the urban areas.

  19. Using a Control System Ethernet Network as a Field Bus

    CERN Document Server

    De Van, William R; Lawson, Gregory S; Wagner, William H; Wantland, David M; Williams, Ernest

    2005-01-01

    A major component of a typical accelerator distributed control system (DCS) is a dedicated, large-scale local area communications network (LAN). The SNS EPICS-based control system uses a LAN based on the popular IEEE-802.3 set of standards (Ethernet). Since the control system network infrastructure is available throughout the facility, and since Ethernet-based controllers are readily available, it is tempting to use the control system LAN for "fieldbus" communications to low-level control devices (e.g. vacuum controllers; remote I/O). These devices may or may not be compatible with the high-level DCS protocols. This paper presents some of the benefits and risks of combining high-level DCS communications with low-level "field bus" communications on the same network, and describes measures taken at SNS to promote compatibility between devices connected to the control system network.

  20. A holistic perspective on corporate sustainability drivers

    NARCIS (Netherlands)

    Lozano, Rodrigo

    2015-01-01

    Since company boards are increasingly discussing 'sustainability', it becomes necessary to examine the nature of sustainability drivers. Most approaches to corporate sustainability drivers have focused either on internal or external drivers. This paper is aimed at providing a more holistic

  1. A holistic perspective on corporate sustainability drivers

    NARCIS (Netherlands)

    Lozano, R.

    2013-01-01

    Since company boards are increasingly discussing 'sustainability', it becomes necessary to examine the nature of sustainability drivers. Most approaches to corporate sustainability drivers have focused either on internal or external drivers. This paper is aimed at providing a more holistic

  2. Autonomous Navigation and Obstacle Avoidance of a Micro-Bus

    Directory of Open Access Journals (Sweden)

    Carlos Fernández

    2013-04-01

    Full Text Available At present, the topic of automated vehicles is one of the most promising research areas in the field of Intelligent Transportation Systems (ITS. The use of automated vehicles for public transportation also contributes to reductions in congestion levels and to improvements in traffic flow. Moreover, electrical public autonomous vehicles are environmentally friendly, provide better air quality and contribute to energy conservation. The driverless public transportation systems, which are at present operating in some airports and train stations, are restricted to dedicated roads and exhibit serious trouble dynamically avoiding obstacles in the trajectory. In this paper, an electric autonomous mini-bus is presented. All datasets used in this article were collected during the experiments carried out in the demonstration event of the 2012 IEEE Intelligent Vehicles Symposium that took place in Alcalá de Henares (Spain. The demonstration consisted of a route 725 metres long containing a list of latitude-longitude points (waypoints. The mini-bus was capable of driving autonomously from one waypoint to another using a GPS sensor. Furthermore, the vehicle is provided with a multi-beam Laser Imaging Detection and Ranging (LIDAR sensor for surrounding reconstruction and obstacle detection. When an obstacle is detected in the planned path, the planned route is modified in order to avoid the obstacle and continue its way to the end of the mission. On the demonstration day, a total of 196 attendees had the opportunity to get a ride on the vehicles. A total of 28 laps were successfully completed in full autonomous mode in a private circuit located in the National Institute for Aerospace Research (INTA, Spain. In other words, the system completed 20.3 km of driverless navigation and obstacle avoidance.

  3. Indonesian commercial bus drum brake system temperature model

    Energy Technology Data Exchange (ETDEWEB)

    Wibowo, D. B., E-mail: rmt.bowo@gmail.com; Haryanto, I., E-mail: ismoyo2001@yahoo.de; Laksono, N. P., E-mail: priyolaksono89@gmail.com [Mechanical Engineering Dept., Faculty of Engineering, Diponegoro University (Indonesia)

    2016-03-29

    Brake system is the most significant aspect of an automobile safety. It must be able to slow the vehicle, quickly intervening and reliable under varying conditions. Commercial bus in Indonesia, which often stops suddenly and has a high initial velocity, will raise the temperature of braking significantly. From the thermal analysis it is observed that for the bus with the vehicle laden mass of 15 tons and initial velocity of 80 km/h the temperature is increasing with time and reaches the highest temperature of 270.1 °C when stops on a flat road and reaches 311.2 °C on a declination road angle, ø, 20°. These temperatures exceeded evaporation temperature of brake oil DOT 3 and DOT 4. Besides that, the magnitude of the braking temperature also potentially lowers the friction coefficient of more than 30%. The brakes are pressed repeatedly and high-g decelerations also causes brake lining wear out quickly and must be replaced every 1 month as well as the emergence of a large thermal stress which can lead to thermal cracking or thermal fatigue crack. Brake fade phenomenon that could be the cause of many buses accident in Indonesia because of the failure of the braking function. The chances of accidents will be even greater when the brake is worn and not immediately replaced which could cause hot spots as rivets attached to the brake drum and brake oil is not changed for more than 2 years that could potentially lower the evaporation temperature because of the effect hygroscopic.

  4. Real-time bus location monitoring using Arduino

    Science.gov (United States)

    Ibrahim, Mohammad Y. M.; Audah, Lukman

    2017-09-01

    The Internet of Things (IoT) is the network of objects, such as a vehicles, mobile devices, and buildings that have electronic components, software, and network connectivity that enable them to collect data, run commands, and be controlled through the Internet. Controlling physical items from the Internet will increase efficiency and save time. The growing number of devices used by people increases the practicality of having IoT devices on the market. The IoT is also an opportunity to develop products that can save money and time and increase work efficiency. Initially, they need more efficiency for real-time bus location systems, especially in university campuses. This system can easily find the accurate locations of and distances between each bus stop and the estimated time to reach a new location. This system has been separated into two parts, which are the hardware and the software. The hardware parts are the Arduino Uno and the Global Positioning System (GPS), while Google Earth and GpsGate are the software parts. The GPS continuously takes input data from the satellite and stores the latitude and longitude values in the Arduino Uno. If we want to track the vehicle, we need to send the longitude and latitude as a message to the Google Earth software to convert these into maps for navigation. Once the Arduino Uno is activated, it takes the last received latitude and longitude positions' values from GpsGate and sends a message to Google Earth. Once the message has been sent to Google Earth, the current location will be shown, and navigation will be activated automatically. Then it will be broadcast using ManyCam, Google+ Hangouts, and YouTube, as well as Facebook, and appear to users. The additional features use Google Forms for determining problems faced by students, who can also take immediate action against the responsible department. Then after several successful simulations, the results will be shown in real time on a map.

  5. Implementation of a Cooking Bus intervention to support cooking in schools in Wales, UK.

    Science.gov (United States)

    Segrott, Jeremy; Holliday, Jo; Murphy, Simon; Macdonald, Sarah; Roberts, Joan; Moore, Laurence; Phillips, Ceri

    2017-01-01

    The teaching of cooking is an important aspect of school-based efforts to promote healthy diets among children, and is frequently done by external agencies. Within a limited evidence base relating to cooking interventions in schools, there are important questions about how interventions are integrated within school settings. The purpose of this paper is to examine how a mobile classroom (Cooking Bus) sought to strengthen connections between schools and cooking, and drawing on the concept of the sociotechnical network, theorise the interactions between the Bus and school contexts. Methods comprised a postal questionnaire to 76 schools which had received a Bus visit, and case studies of the Bus' work in five schools, including a range of school sizes and urban/rural locations. Case studies comprised observation of Cooking Bus sessions, and interviews with school staff. The Cooking Bus forged connections with schools through aligning intervention and schools' goals, focussing on pupils' cooking skills, training teachers and contributing to schools' existing cooking-related activities. The Bus expanded its sociotechnical network through post-visit integration of cooking activities within schools, particularly teachers' use of intervention cooking kits. The paper highlights the need for research on the long-term impacts of school cooking interventions, and better understanding of the interaction between interventions and school contexts. This paper adds to the limited evidence base on school-based cooking interventions by theorising how cooking interventions relate to school settings, and how they may achieve integration.

  6. Self-assessed job satisfaction and ischaemic heart disease mortality: a 10-year follow-up of urban bus drivers

    DEFF Research Database (Denmark)

    Netterstrøm, B; Suadicani, P

    1993-01-01

    working in a high traffic intensity area, RR = 1.6. In contrast to what was expected, men who reported a high degree of job satisfaction had increased risk of IHD. Those who did not look for another job had a highly significant sixfold increased risk of future death from IHD. Also those who reported never...... experiencing mental exhaustion after work, that their job was very varied, that their job was something special, and those who reported that they would choose the same job again, had an excess risk. Death due to other causes was positively associated with marital status only. We suggest that inconsistencies...

  7. The effects of in-vehicle tasks and time-gap selection while reclaiming control from adaptive cruise control (ACC) with bus simulator.

    Science.gov (United States)

    Lin, Tsang-Wei; Hwang, Sheue-Ling; Su, Jau-Ming; Chen, Wan-Hui

    2008-05-01

    This research aimed to find out the effects of in-vehicle distractions and time-gap settings with a fix-based bus driving simulator in a following scenario. Professional bus drivers were recruited to perform in-vehicle tasks while driving with adaptive cruise control (ACC) of changeable time-gap settings in freeway traffic. Thirty subjects were divided equally into three groups for different in-vehicle task modes (between subjects), including no task distraction, hands-free, and manual modes. Further, time-gap settings for the experimental ACC were: shorter than 1.0 s, 1.0-1.5 s, 1.5-2.0 s, and longer than 2.0 s (within subjects). Longitudinal (mean headway, forward collision rate, and response time) and lateral control (mean lateral lane position and its standard deviation) performance was assessed. In the results, longitudinal control performance was worsened by both shorter time-gaps and heavier in-vehicle tasks. But the interaction indicated that the harm by heavier in-vehicle distraction could be improved by longer time-gaps. As for the lateral control, it would only be negatively affected by shorter time-gap settings. This research indicates the effects of time-gaps and in-vehicle distraction, as well as the interaction. Proper time-gap selection under different in-vehicle distractions can help avoid accidents and keep safe.

  8. Connecticut Transit (CTTRANSIT) Fuel Cell Transit Bus: Third Evaluation Report and Appendices

    Energy Technology Data Exchange (ETDEWEB)

    Chandler, K.; Eudy, L.

    2010-01-01

    This report describes operations at Connecticut Transit (CTTRANSIT) in Hartford for one prototype fuel cell bus and three new diesel buses operating from the same location. The prototype fuel cell bus was manufactured by Van Hool and ISE Corp. and features an electric hybrid drive system with a UTC Power PureMotion 120 Fuel Cell Power System and ZEBRA batteries for energy storage. The fuel cell bus started operation in April 2007, and evaluation results through October 2009 are provided in this report.

  9. Single Axis Attitude Control and DC Bus Regulation with Two Flywheels

    Science.gov (United States)

    Kascak, Peter E.; Jansen, Ralph H.; Kenny, Barbara; Dever, Timothy P.

    2002-01-01

    A computer simulation of a flywheel energy storage single axis attitude control system is described. The simulation models hardware which will be experimentally tested in the future. This hardware consists of two counter rotating flywheels mounted to an air table. The air table allows one axis of rotational motion. An inertia DC bus coordinator is set forth that allows the two control problems, bus regulation and attitude control, to be separated. Simulation results are presented with a previously derived flywheel bus regulator and a simple PID attitude controller.

  10. Rosalind Driver studentships

    Science.gov (United States)

    1999-11-01

    The School of Education at King's College London can now offer funded studentships to those wishing to undertake research in science education. These studentships, which are funded through the generous benefaction of the late Rosalind Driver, can be for a full-time student (over a maximum of three years) or several part-time students (a maximum of six years). Applications from anyone working in science education are welcome but preference will be given to those originating from practising science teachers. Applicants will be expected to register for the award of a MPhil/PhD or EdD and are normally expected to have a first degree. Preliminary ideas about a topic for investigation would also be helpful. Further details and application forms are obtainable from Chiz Dube, School of Education, King's College London, Franklin - Wilkins Building, Waterloo Road, London SE1 8WA (tel: 020-7848-3089, e-mail: chiz.dube@kcl.ac.uk). The deadline for the first round of applications was the middle of October, but preliminary informal enquiries may be made to Dr Jonathan Osborne at the School of Education (tel: 020-7848-3094, e-mail: jonathan.osborne@kcl.ac.uk).

  11. Alcohol and older drivers' crashes.

    Science.gov (United States)

    2014-09-01

    Researchers have examined the effects of alcohol consumption : on older adults functioning, and some have : addressed alcohols effects on older drivers crash risk. : Generally, the findings have shown that alcohol is less : likely to be a fa...

  12. Roundabout design and elderly drivers.

    Science.gov (United States)

    2011-10-01

    Many drivers are apprehensive to accept a roundabout as a viable form of intersection, but their : safety and mobility benefits are increasing their popularity among designers. This thesis is an indepth study of a specific approach at a roundabout in...

  13. Older-driver foot movements.

    Science.gov (United States)

    2017-07-01

    This study explored how drivers 60 and older control the accelerator and brake while driving and parking. It built upon : the findings of a study documenting the prevalence and characteristics associated with pedal misapplication crashes : (Lococo, S...

  14. State and Federal project development procedures for bus rapid transit : managing differences and reducing implementation delays

    Science.gov (United States)

    2011-08-01

    This report documents an investigation into the transportation project development process in the : context of the implementation of bus rapid transit systems on the State Highway System as well as such : systems being part of the Federal New Starts ...

  15. Toward Real-time Multi-criteria Decision Making for Bus Service Reliability Optimisation

    DEFF Research Database (Denmark)

    Tran, Vu The; Eklund, Peter; Cook, Chris

    2015-01-01

    -objective evolutionary algorithm using a dynamic Bayesian network, applies preventive strategies to forestall bus unreliability and, where unreliability is evident, restore reliability using corrective strategies. 'Holding', 'expressing', 'short-turning' and 'deadheading' are the corrective strategies considered...

  16. Exploring public bus service quality in South Africa: A structural equation modelling approach

    Directory of Open Access Journals (Sweden)

    Ayanda M. Vilakazi

    2014-03-01

    Full Text Available This study, which is a deviation from the usual practice of using SERVQUAL or an adaptedversion thereof, uses McKnight, Pagano and Paaswell’s (1986 service quality dimensions,namely reliability; extent of service; comfort; safety; and affordability (RECSA and structuralequation modelling to determine commuters’ perception of public bus service quality in amajor city in South Africa. The RECSA model was adapted and fitted to the data collectedfrom a convenience sample of bus commuters in Johannesburg, using structural equationmodelling. It was ascertained that reliability, service, comfort and safety influenced thepublic bus commuters’ perception of the overall service quality. The implications of theaforementioned findings for providers of public bus services are explained.

  17. Railroad and Bus Passenger Stations of the United States - Direct Download

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This map layer shows Amtrak intercity railroad and bus passenger terminals in the United States. There are no Amtrak stations in Alaska or Hawaii. The data are a...

  18. Optimizing a desirable fare structure for a bus-subway corridor

    National Research Council Canada - National Science Library

    Bing-Zheng Liu; Ying-En Ge; Kai Cao; Xi Jiang; Lingyun Meng; Ding Liu; Yunfeng Gao

    This paper aims to optimize a desirable fare structure for the public transit service along a bus-subway corridor with the consideration of those factors related to equity in trip, including travel...

  19. A Hierarchical Approach to Optimizing Bus Stop Distribution in Large and Fast Developing Cities

    Directory of Open Access Journals (Sweden)

    Zhengdong Huang

    2014-04-01

    Full Text Available Public transit plays a key role in shaping the transportation structure of large and fast growing cities. To cope with high population and employment density, such cities usually resort to multi-modal transit services, such as rail, BRT and bus. These modes are strategically connected to form an effective transit network. Among the transit modes, bus stops need to be properly deployed to maintain an acceptable walking accessibility. This paper presents a hierarchical process for optimizing bus stop locations in the context of fast growing multi-modal transit services. Three types of bus stops are identified hierarchically, which includes connection stops, key stops and ordinary stops. Connection stops are generated manually to connect with other transit facilities. Key stops and ordinary stops are optimized with coverage models that are respectively weighted by network centrality measure and potential demand. A case study in a Chinese city suggests the hierarchical approach may generate more effective stop distribution.

  20. Performance analysis of time triggered communication bus based on network calculus

    Science.gov (United States)

    Sun, Jiandong; Ma, Lianchuan; Cao, Yuan; Mu, Jiancheng

    2017-03-01

    The time triggered mechanism is the activity of incentive system in the scheduled time. Each node of the time-triggered communication bus knows when the data information can be transmitted, so the behavior of communication nodes is determined and predictable. This feature is very suitable for appling in the industry field of high safety requirement. According to EN50159 standard for railway signal system security related communication, this paper analyzes the reliability of the physical layer of communication bus, and uses the network calculus method to establish the arrival curve model and service curve model which quantitatively calculate the time delay characteristic of time trigger bus to determine the number of retransmissions of data communications. The time-triggered communication bus is proved that it can meet the security requirements of the railway signal transmission system.

  1. Implementation of Bus Rapid Transit in Copenhagen: A Mesoscopic Model Approach

    DEFF Research Database (Denmark)

    Ingvardson, Jesper Bláfoss; Kornerup Jensen, Jonas

    2012-01-01

    upgrades (busways and enhanced stations) ensure a reduction to traveltime whereas no improvements to reliability occur. Upgrades to technology and serviceplanning (pre-paid fare collection, boarding and alighting from all doors, special BRT vehicles, ITS, and active bus control) ensure an increase...... for large scale corridors due to the vast amount of data and resources required.Hence, it is relevant to investigate how to model and evaluate BRT efficiently.In this paper the effects of implementing BRT in Copenhagen is discussed including how to evaluate and model bus operations.For this purpose......-simulation models.The developed model is capable of modelling bus operations in terms of travel time and reliability including important mode-specific issues such as bus bunching.The model is applied to a BRT project proposal with different combinations of BRTelements. The model results show that infrastructure...

  2. Glacier Going to the Sun Road Rehabilitation Mitigation Shuttle Bus Evaluation.

    Science.gov (United States)

    2008-03-31

    As a mitigation measure during reconstruction of the Going to the Sun Road, Glacier National Park operated a shuttle bus system along three routes during the 2007 season. This report presents a multi-dimensional evaluation of the transportation servi...

  3. Optimizing Frequency of Bus Services in Mixed-Traffic Urban Streets

    National Research Council Canada - National Science Library

    KOV, Monyrath; FUKUDA, Daisuke; YAI, Tetsuo

    2011-01-01

    In this paper, a new analytical model is proposed to determine optimal frequency for urban bus transit under variable demand by explicitly considering the interaction between different vehicles in urban mixed traffic...

  4. Long term application of bus monitoring system to short and medium span bridges and damage detection

    Science.gov (United States)

    Miyamoto, Ayaho; Lúcio, Válter J. G.; Emoto, Hisao; Tanaka, Hideaki

    2015-07-01

    In this study, as one solution to the problem for condition assessment of existing short and medium span reinforced/prestressed concrete bridges, a new monitoring method using a public bus as part of a public transit system (bus monitoring system) is proposed, along with safety indices, namely, characteristic deflection, which is relatively free from the influence of dynamic disturbances due to such factors as the roughness of the road surface, and a structural anomaly parameter. A basic study was conducted by using the results of technical verification experiments and numerical analysis simulation. This paper describes the details of not only how to assess the bridge condition by public bus vibration measured in operating on Ube City bus network as a specific example for verify the system but also what kind of consideration we need to apply the system to existing bridges in overseas country.

  5. Psychosocial Work Factors, Blood Pressure and Psychological Strain in Male Bus Operators

    Science.gov (United States)

    CENDALES, Boris; USECHE, Sergio; GÓMEZ, Viviola

    2014-01-01

    The research aim was to predict the bus operators’ blood pressure (BP) and psychological strain using a combination of the Job-Demand Control (JDC) and Effort-Reward Imbalance (ERI) models. The study was conducted with a sample of 139 bus operators in the city of Bogotá (Colombia), who answered a questionnaire that included the Job Content Questionnaire (JCQ), the ERI Questionnaire, and the General Health Questionnaire (GHQ). Four consecutive BP readings taken in the workplace were averaged to calculate an estimation of the bus operators’ BP. By conducting multiple linear regressions it was found that, taken together, JDC and ERI models explain 10% (F(11,139)=2,502; p=0.00) of systolic BP variance, and 34% (F(6,139)=8,638; p=0.00) of psychological strain variance. These results suggest that the JDC and ERI predictors provide complementary information which increases the probability of accurately model the bus operators’ health. PMID:24869893

  6. Analysis of Journey to Work Travel Behavior by Car and Bus in the Sydney Metropolitan Region

    Directory of Open Access Journals (Sweden)

    Suthanaya P.A.

    2011-01-01

    Full Text Available Car dependence is a fundamental problem in the sustainability of cities with low-density suburban sprawl. Increasing the use of public transport is one of the policy objectives commonly adopted to overcome this problem. It is essential to study journey to work travel behavior by car and bus. This paper applied preference function to analyze travel behavior and Moran’s I spatial statistic to evaluate the spatial association. The results indicated that the commuting preferences of residents have moved towards distance maximization. In general, bus was preferred for shorter distance trips whilst car was preferred for longer distance trips. Unlike car, by increasing distances from the Central Business District, residents tended to use bus for shorter distance trip. A significant positive spatial association was identified for both the slope preferences by car and bus where zones with a preference towards longer or shorter trips tended to travel to zones with similar preferences.

  7. Measuring technology in the Autarkic Hybrid of the TUM based on the CAN-BUS; Messtechnik im Autarken Hybrid der TUM auf Basis des CAN-BUS

    Energy Technology Data Exchange (ETDEWEB)

    Freimann, R.; Rhenius, K.T. [VDI, Garching (Germany)

    1999-07-01

    In the frame of the partial project B8, equipment of the test vehicle in terms of measuring technology, the SFB 365 (Environmentally friendly drive technology for vehicles) tests have been carried out to show the suitability of serial digital data transfer for the acquisition of measuring data and the Controller Area Network (CAN) was selected as appropriate transfer medium in order to realise communication in a decentral control and to realise the control of all drive system functions based upon distributed control devices. All measuring and control data necessary for the control are transferred to the ''Control-BUS'' (BUS = Binary Unit System). Parallel to the control process the necessary high frequency measuring data are transferred on a second CAN and are recorded together with the data on the Control-BUS. The necessary sensors for the data acquisition were designed and tested within the partial project B8 as far as they were not a direct component of the control system of a partial component in the drive system. (orig.) [German] Im Rahmen des Teilprojektes B8, messtechnische Ausruestung des Versuchsfahrzeuges, des SFB 365 (Umweltfreundliche Antriebstechnik fuer Fahrzeuge) wurden Untersuchungen zur Eignung einer seriell digitalen Datenuebertragung fuer die Messdatenerfassung durchgefuehrt und das Controller Area Network (CAN) als geeignetes Uebertragungsmedium zur Realisierung der Kommunikation in einer dezentralen Steuerung / Regelung aller Antriebsstrangfunktionen auf Basis verteilter Steuergeraete ausgewaehlt. Alle zur Regelung benoetigten Mess- und Statusdaten werden auf dem 'Regel-BUS' (BUS = Binary Unit System) uebertragen. Parallel zur Regelung werden die erforderlichen hochfrequenten Messdaten auf einem zweiten CAN Uebertragen und gemeinsam mit den Daten auf dem Regel-BUS aufgezeichnet. Die erforderliche Sensorik der Datenerfassung wurde, soweit sie nicht direkter Bestandteil der Regelung einer Teilkomponente im

  8. Two-Stage Vibration Isolation for Flexible Satellite Bus and Optic Payload Structures

    Science.gov (United States)

    2015-11-27

    and damper model and with neglectable mass . Subscripts denote degree of freedoms corresponding to actuators ( R ), actuator isolators’ locations on... damper inserted inside the elastic element. Comparing with liquid damper and viscoelastic material damper , this damper has such merits as simple...satellite bus and the optic payload are rigid body. This study indicates that a large mass ratio between the satellite bus and the optical payload can

  9. Bavarian liquid hydrogen bus demonstration project - safety, licensing and acceptability aspects

    Energy Technology Data Exchange (ETDEWEB)

    Wurster, R.; Knorr, H.; Pruemm, W.

    1999-07-01

    A regular 12 m city bus of the MAN SL 202 type with an internal combustion engine adapted to hydrogen operation and auxiliary gasoline operation was demonstrated in the Bavarian cities of Erlangen and Munich between April 1996 and August 1998. Three bus operators, Erlanger Stadtwerke, Stadtwerke Muenchen and Autobus Oberbayern were testing the bus in three different operating schemes. In order to be able to perform this worldwide first public demonstration of a liquid hydrogen (LH{sub 2}) city bus in regular service, several requirements with respect to safety, licensing, training and acceptability had to be fulfilled. These activities were focusing mainly on the hydrogen specific issues such as (a) integration of onboard LH{sub 2} storage vessels, piping and instrumentation, (b) implementation of storage and refueling infrastructure in the operators' yards, (c) adaptation of the maintenance garages, (d) training of operating and maintenance personnel. During phase II of the demonstration activity a poll was performed on passengers traveling onboard the hydrogen-powered city bus in order to determined the level of acceptance among the users of the bus. The bus was designed and manufactured by MAN Nutzfahrzeuge Aktiengesellschaft. The cryogenic fuel storage and the refueling equipment were designed and manufactured by Linde AG. The realization of the hardware was financially supported by the European Commission (EC) within the Euro-Quebec Hydro-Hydrogen Pilot Project. The demonstration phase was financially supported by EC and the Bavarian State Government. Ludwig-Boelkow-Systemtechnik performed project monitoring for both funding organizations. The presentation will summarize the most important results of this demonstration phase and will address the measures undertaken in order to get the bus, the refueling infrastructure and the maintenance and operating procedures approved by the relevant authorities.

  10. Mechanical analysis of the main bus bars in the DFBA shuffling modules

    CERN Document Server

    Ramos, D

    2012-01-01

    The main bus bars (13 kA) inside the shuffling modules of the distribution feed boxes powering the LHC arcs (DFBA) are subjected to high Lorentz forces. The structural behaviour of the bus bars under such forces is here analysed. The results are discussed with respect to a risk of structural failure due to excessive deformation or degradation of the electrical insulation by repeated contact with other surfaces.

  11. Design of Bus Protocol Intelligent Initiation System Based On RS485

    Directory of Open Access Journals (Sweden)

    Li Liming

    2017-01-01

    Full Text Available In order to design an effective and reliable RS485 bus protocol based on RS485 bus, this paper introduces the structure and transmission mode of the command frame and the response frame, and also introduce four control measures and the communication in order to process quality of this system. The communication protocol is open, tolerant, reliable and fast, and can realize ignition more reliable and accurate in the intelligent initiation system.

  12. Stochastic Bus Traffic Modelling and Validation Using Smart Card Fare Collection Data

    OpenAIRE

    Ivanchev, Jordan;Aydt, Heiko;Knoll, Alois

    2017-01-01

    This paper examines some of the most important contributions regarding bus transit control and optimisation from a modelling perspective. It provides guidelines for designing simulations of this type and points to the need of a qualitatively and quantitatively correct model that is validated and can serve as a benchmark testing platform for the numerous optimisation strategies that researchers present. It examines a case study about a bus line in Singapore and uses smart card data to extract ...

  13. 49 CFR 380.109 - Driver testing.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 5 2010-10-01 2010-10-01 false Driver testing. 380.109 Section 380.109....109 Driver testing. (a) Testing methods. The driver-student must pass knowledge and skills tests in... LCV driver-instructor. (d) Guidance for testing methods and proficiency determinations. Motor carriers...

  14. Exact and Metaheuristic Approaches for a Bi-Objective School Bus Scheduling Problem.

    Science.gov (United States)

    Chen, Xiaopan; Kong, Yunfeng; Dang, Lanxue; Hou, Yane; Ye, Xinyue

    2015-01-01

    As a class of hard combinatorial optimization problems, the school bus routing problem has received considerable attention in the last decades. For a multi-school system, given the bus trips for each school, the school bus scheduling problem aims at optimizing bus schedules to serve all the trips within the school time windows. In this paper, we propose two approaches for solving the bi-objective school bus scheduling problem: an exact method of mixed integer programming (MIP) and a metaheuristic method which combines simulated annealing with local search. We develop MIP formulations for homogenous and heterogeneous fleet problems respectively and solve the models by MIP solver CPLEX. The bus type-based formulation for heterogeneous fleet problem reduces the model complexity in terms of the number of decision variables and constraints. The metaheuristic method is a two-stage framework for minimizing the number of buses to be used as well as the total travel distance of buses. We evaluate the proposed MIP and the metaheuristic method on two benchmark datasets, showing that on both instances, our metaheuristic method significantly outperforms the respective state-of-the-art methods.

  15. An analytical algorithm to determine allowable ampacities of horizontally installed rectangular bus bars

    Directory of Open Access Journals (Sweden)

    Klimenta Dardan O.

    2016-01-01

    Full Text Available The main objective of this paper is to propose an algorithm for the determination of the allowable ampacities of single rectangular-section bus bars without the occurrence of correction factors. Without correction factors, the ampacity computation of the copper and aluminium bus bars is fully automatized. The analytical algorithm has been implemented in a computer program code that along with the allowable ampacity can compute the bus bar temperature and the individual heat transfer coefficient for each side of the bus bar, as well as their corresponding power losses. Natural and forced convection correlations for rectangular bus bars are applied. Effects of the solar radiation and radiation heat losses from the bus bar surface are taken into consideration as well. The finite element method (FEM has been used for the linear/non-linear steady-state thermal analysis, i.e. for validation of the analytical algorithm. All FEM-based numerical computations were carried out using the COMSOL Heat Transfer Module. [Projekat Ministarstva nauke Republike Srbije, br. TR33046

  16. Optimal Design of the Feeder-Bus Network Based on the Transfer System

    Directory of Open Access Journals (Sweden)

    Lianbo Deng

    2013-01-01

    Full Text Available This paper studied the classic feeder-bus network design problem (FBNDP, which can be described as follows: for the passenger travel demand between rail stations and bus stops on a given urban transit network, it designs the optimal feeder bus routes and frequencies so as to minimize the passengers’ travel expense and the operator’s cost. We extended the demand pattern of M-to-1 in most existing researches to M-to-M. We comprehensively considered the passenger travel cost, which includes the waiting and riding cost on the bus, riding cost on rail, and transfer cost between these two transportation modes, and presented a new genetic algorithm that determines the optimal feeder-bus operating frequencies under strict constraint conditions. The numerical examples under different demand patterns have been experienced and analysed, which showed the robustness and efficiency of the presented algorithm. We also found that the distribution pattern of the travel demand has a significant influence on the feeder-bus network construction.

  17. Exact and Metaheuristic Approaches for a Bi-Objective School Bus Scheduling Problem.

    Directory of Open Access Journals (Sweden)

    Xiaopan Chen

    Full Text Available As a class of hard combinatorial optimization problems, the school bus routing problem has received considerable attention in the last decades. For a multi-school system, given the bus trips for each school, the school bus scheduling problem aims at optimizing bus schedules to serve all the trips within the school time windows. In this paper, we propose two approaches for solving the bi-objective school bus scheduling problem: an exact method of mixed integer programming (MIP and a metaheuristic method which combines simulated annealing with local search. We develop MIP formulations for homogenous and heterogeneous fleet problems respectively and solve the models by MIP solver CPLEX. The bus type-based formulation for heterogeneous fleet problem reduces the model complexity in terms of the number of decision variables and constraints. The metaheuristic method is a two-stage framework for minimizing the number of buses to be used as well as the total travel distance of buses. We evaluate the proposed MIP and the metaheuristic method on two benchmark datasets, showing that on both instances, our metaheuristic method significantly outperforms the respective state-of-the-art methods.

  18. Evaluation of Effective Factors on Travel Time in Optimization of Bus Stops Placement Using Genetic Algorithm

    Science.gov (United States)

    Bargegol, Iraj; Ghorbanzadeh, Mahyar; Ghasedi, Meisam; Rastbod, Mohammad

    2017-10-01

    In congested cities, locating and proper designing of bus stops according to the unequal distribution of passengers is crucial issue economically and functionally, since this subject plays an important role in the use of bus system by passengers. Location of bus stops is a complicated subject; by reducing distances between stops, walking time decreases, but the total travel time may increase. In this paper, a specified corridor in the city of Rasht in north of Iran is studied. Firstly, a new formula is presented to calculate the travel time, by which the number of stops and consequently, the travel time can be optimized. An intended corridor with specified number of stops and distances between them is addressed, the related formulas to travel time are created, and its travel time is calculated. Then the corridor is modelled using a meta-heuristic method in order that the placement and the optimal distances of bus stops for that are determined. It was found that alighting and boarding time along with bus capacity are the most effective factors affecting travel time. Consequently, it is better to have more concentration on indicated factors for improving the efficiency of bus system.

  19. Biobjective Optimization and Evaluation for Transit Signal Priority Strategies at Bus Stop-to-Stop Segment

    Directory of Open Access Journals (Sweden)

    Rui Li

    2016-01-01

    Full Text Available This paper proposes a new optimization framework for the transit signal priority strategies in terms of green extension, red truncation, and phase insertion at the stop-to-stop segment of bus lines. The optimization objective is to minimize both passenger delay and the deviation from bus schedule simultaneously. The objective functions are defined with respect to the segment between bus stops, which can include the adjacent signalized intersections and downstream bus stops. The transit priority signal timing is optimized by using a biobjective optimization framework considering both the total delay at a segment and the delay deviation from the arrival schedules at bus stops. The proposed framework is evaluated using a VISSIM model calibrated with field traffic volume and traffic signal data of Caochangmen Boulevard in Nanjing, China. The optimized TSP-based phasing plans result in the reduced delay and improved reliability, compared with the non-TSP scenario under the different traffic flow conditions in the morning peak hour. The evaluation results indicate the promising performance of the proposed optimization framework in reducing the passenger delay and improving the bus schedule adherence for the urban transit system.

  20. Research development and demonstration of a fuel cell/battery powered bus system

    Science.gov (United States)

    Romano, S.; Wimmer, R.

    1993-02-01

    During 1992, the design of the three test bed buses evolved. Georgetown participated in all the working meetings and the preliminary design review of the Test Bed Bus (TBB). Throughout the Year, Georgetown provided input on system design and integration issues, transit industry requirements, and bus performance. GU also attended technical seminars, presenting papers at two. The computer simulation 'HYBRID', developed by Georgetown, was used to assess performance of different bus designs and system control algorithms. GU also modified the simulation to be more flexible and allow easier evaluation of designs. Georgetown had Exhibitgroup design and construct, to our specifications, a fuel cell bus display with a 1/10 scale model of the TBB for use at trade shows and exhibits. Energy Partners of West Palm Beach, Florida completed their subcontract for the engineering design study of a hydrogen fueled, fuel-cell-powered multi-passenger vehicle. Georgetown performed a study to determine the size of the US bus fleet and expected new bus deliveries over the next 10 years. Trojan Battery Company of Santa Fe Springs, California conducted a study to determine the specific design characteristics required of a lead acid battery to meet the special requirements posed by hybrid vehicle operation. Finally, GU assisted the prime contractor with the design of the system controller and its control algorithms.

  1. Bus Based Synchronization Method for CHIPPER Based NoC

    Directory of Open Access Journals (Sweden)

    D. Muralidharan

    2016-01-01

    Full Text Available Network on Chip (NoC reduces the communication delay of System on Chip (SoC. The main limitation of NoC is power consumption and area overhead. Bufferless NoC reduces the area complexity and power consumption by eliminating buffers in the traditional routers. The bufferless NoC design should include live lock freeness since they use hot potato routing. This increases the complexity of bufferless NoC design. Among the available propositions to reduce this complexity, CHIPPER based bufferless NoC is considered as one of the best options. Live lock freeness is provided in CHIPPER through golden epoch and golden packet. All routers follow some synchronization method to identify a golden packet. Clock based method is intuitively followed for synchronization in CHIPPER based NoCs. It is shown in this work that the worst-case latency of packets is unbearably high when the above synchronization is followed. To alleviate this problem, broadcast bus NoC (BBus NoC approach is proposed in this work. The proposed method decreases the worst-case latency of packets by increasing the golden epoch rate of CHIPPER.

  2. Experimental investigation review of biodiesel usage in bus diesel engine

    Directory of Open Access Journals (Sweden)

    Kegl Breda

    2017-01-01

    Full Text Available This paper assembles and analyses extensive experimental research work conducted for several years in relation to biodiesel usage in a MAN bus Diesel engine with M injection system. At first the most important properties of the actually used neat rapeseed biodiesel fuel and its blends with mineral diesel are discussed and compared to that of mineral diesel. Then the injection, fuel spray, and engine characteristics for various considered fuel blends are compared at various ambient conditions, with special emphasis on the influence of low temperature on fueling. Furthermore, for each tested fuel the optimal injection pump timing is determined. The obtained optimal injection pump timings for individual fuels are then used to determine and discuss the most important injection and combustion characteristics, engine performance, as well as the emission, economy, and tribology characteristics of the engine at all modes of emission test cycles test. The results show that for each tested fuel it is possible to find the optimized injection pump timing, which enables acceptable engine characteristics at all modes of the emission test cycles test.

  3. Oxygen Generation System Laptop Bus Controller Flight Software

    Science.gov (United States)

    Rowe, Chad; Panter, Donna

    2009-01-01

    The Oxygen Generation System Laptop Bus Controller Flight Software was developed to allow the International Space Station (ISS) program to activate specific components of the Oxygen Generation System (OGS) to perform a checkout of key hardware operation in a microgravity environment, as well as to perform preventative maintenance operations of system valves during a long period of what would otherwise be hardware dormancy. The software provides direct connectivity to the OGS Firmware Controller with pre-programmed tasks operated by on-orbit astronauts to exercise OGS valves and motors. The software is used to manipulate the pump, separator, and valves to alleviate the concerns of hardware problems due to long-term inactivity and to allow for operational verification of microgravity-sensitive components early enough so that, if problems are found, they can be addressed before the hardware is required for operation on-orbit. The decision was made to use existing on-orbit IBM ThinkPad A31p laptops and MIL-STD-1553B interface cards as the hardware configuration. The software at the time of this reporting was developed and tested for use under the Windows 2000 Professional operating system to ensure compatibility with the existing on-orbit computer systems.

  4. Evolution of weighted complex bus transit networks with flow

    Science.gov (United States)

    Huang, Ailing; Xiong, Jie; Shen, Jinsheng; Guan, Wei

    2016-02-01

    Study on the intrinsic properties and evolutional mechanism of urban public transit networks (PTNs) has great significance for transit planning and control, particularly considering passengers’ dynamic behaviors. This paper presents an empirical analysis for exploring the complex properties of Beijing’s weighted bus transit network (BTN) based on passenger flow in L-space, and proposes a bi-level evolution model to simulate the development of transit routes from the view of complex network. The model is an iterative process that is driven by passengers’ travel demands and dual-controlled interest mechanism, which is composed of passengers’ spatio-temporal requirements and cost constraint of transit agencies. Also, the flow’s dynamic behaviors, including the evolutions of travel demand, sectional flow attracted by a new link and flow perturbation triggered in nearby routes, are taken into consideration in the evolutional process. We present the numerical experiment to validate the model, where the main parameters are estimated by using distribution functions that are deduced from real-world data. The results obtained have proven that our model can generate a BTN with complex properties, such as the scale-free behavior or small-world phenomenon, which shows an agreement with our empirical results. Our study’s results can be exploited to optimize the real BTN’s structure and improve the network’s robustness.

  5. Modified network simulation model with token method of bus access

    Directory of Open Access Journals (Sweden)

    L.V. Stribulevich

    2013-08-01

    Full Text Available Purpose. To study the characteristics of the local network with the marker method of access to the bus its modified simulation model was developed. Methodology. Defining characteristics of the network is carried out on the developed simulation model, which is based on the state diagram-layer network station with the mechanism of processing priorities, both in steady state and in the performance of control procedures: the initiation of a logical ring, the entrance and exit of the station network with a logical ring. Findings. A simulation model, on the basis of which can be obtained the dependencies of the application the maximum waiting time in the queue for different classes of access, and the reaction time usable bandwidth on the data rate, the number of network stations, the generation rate applications, the number of frames transmitted per token holding time, frame length was developed. Originality. The technique of network simulation reflecting its work in the steady condition and during the control procedures, the mechanism of priority ranking and handling was proposed. Practical value. Defining network characteristics in the real-time systems on railway transport based on the developed simulation model.

  6. Composite Bus Structure for the SMEX/WIRE Satellite

    Science.gov (United States)

    Rosanova, Giulio G.

    1998-01-01

    In an effort to reduce the weight and optimize the structural design of the Small Explorer (SMEX) Wide-Field Infrared Explorer (WIRE) spacecraft, it has become desirable to change the material and construction from mechanically fastened aluminum structure to a fully bonded fiber-reinforced composite (FRC) structure. GSFC has developed the WIRE spacecraft structural bus design concept, including the instrument and launch vehicle requirements. The WIRE Satellite is the fifth of a series of SMEX satellites to be launched once per year. GSFC has chosen Composite Optics Inc. (COI) as the prime contractor for the development and procurement of the WIRE composite structure. The detailed design of the fully bonded FRC structure is based on COI's Short Notice Accelerated Production SATellite ("SNAPSAT") approach. SNAPSAT is a state of the art design and manufacturing technology for advanced composite materials which utilizes flat-stock detail parts bonded together to produce a final structural assembly. The structural design approach adopted for the WIRE structure provides a very viable alternative to both traditional aluminum construction as well as high tech. molded type composite structures. This approach to composite structure design is much less costly than molded or honeycomb sandwich type composite construction, but may cost slightly more than conventional aluminum construction on the subsystem level. However on the overall program level the weight saving achieved is very cost effective, since the primary objective is to allocate more mass for science payloads.

  7. Research on a Novel Hydraulic/Electric Synergy Bus

    Directory of Open Access Journals (Sweden)

    Kegang Zhao

    2017-12-01

    Full Text Available In recent years, increasing concerns regarding environmental pollution and requirements for lower fossil fuel consumption have increased interest in alternative hybrid powertrains. As a result, this paper presents a novel hydraulic/electric synergy powertrain with multiple working modes. The three energy sources (i.e., engine, battery, and hydraulic accumulator in this configuration are regulated by a dual planetary gear set to achieve optimal performances. This paper selects the component sizes of a hybrid electric vehicle (HEV, a hydraulic hybrid vehicle (HHV, and a hydraulic/electric synergy vehicle (HESV, based on the dynamic performance of a target vehicle (TV. In addition, this paper develops the forward simulation models of the four aforementioned vehicles in the MATLAB/Simulink/Driveline platform, in which the fuel economy simulations are carried out in relation to the Chinese urban bus cycle. The simulation results show that the fuel consumption of the three hybrid vehicles is similar, but much better than, that of the TV. Finally, based on the operating cost calculations over a five-year working period, the lowest cost ranges of the three hybrid vehicles are determined, which provides a method for choosing the optimal hybrid scheme.

  8. A synchronous serial bus for multidimensional array acoustic logging tool

    Science.gov (United States)

    Men, Baiyong; Ju, Xiaodong; Lu, Junqiang; Qiao, Wenxiao

    2016-12-01

    In high-temperature and spatial borehole applications, a distributed structure is employed in a multidimensional array acoustic logging tool (MDALT) based on a phased array technique for electronic systems. However, new challenges, such as synchronous multichannel data acquisition, multinode real-time control and bulk data transmission in a limited interval, have emerged. To address these challenges, we developed a synchronous serial bus (SSB) in this study. SSB works in a half-duplex mode via a master-slave architecture. It also consists of a single master, several slaves, a differential clock line and a differential data line. The clock line is simplex, whereas the data line is half-duplex and synchronous to the clock line. A reliable communication between the master and the slaves with real-time adjustment of synchronisation is achieved by rationally designing the frame format and protocol of communication and by introducing a scramble code and a Hamming error-correcting code. The control logic of the master and the slaves is realized in field programmable gate array (FPGA) or complex programmable logic device (CPLD). The clock speed of SSB is 10 MHz, the effective data rate of the bulk data transmission is over 99%, and the synchronous errors amongst the slaves are less than 10 ns. Room-temperature test, high-temperature test (175 °C) and field test demonstrate that the proposed SSB is qualified for MDALT.

  9. KARAKTERISTIK, MOTIVASI, DAN PERSEPSI WISATAWAN MANCANEGARA TERHADAP JASA PELAYANAN SHUTTLE BUS DI DAERAH UBUD, GIANYAR

    Directory of Open Access Journals (Sweden)

    I Putu Putrawan

    2015-12-01

    Full Text Available Saat ini sektor pariwisata di Ubud mengalami perkembangan dengan meningkatnya jumlah wisatawan (384.835 orang yang menggunakan jasa pelayanan shuttle bus dari tahun 2011 sampai tahun 2015 pada perusahaan transportasi di Ubud. Shuttle bus merupakan transportasi publik yang melayani wisatawan dengan sistem sharing pick up dalam melakukan perjalanan ke tempat tujuan. Kemacetan di daerah pariwisata Ubud membuat wisatawan lebih cenderung memilih menggunakan pelayanan shuttle bus ke tempat tujuan wisata, maka ingin diketahui bagaimana karakteristik, motivasi dan persepsi wisatawan mancanegara terhadap jasa pelayanan shuttle bus di Ubud yang hasilnya diharapkan dapat menjadi masukan bagi perusahaan transportasi di Ubud khususnya dalam hal pelayanan kepada wisatawan mancanegara. Metode yang digunakan yaitu deskriptif dengan data kualitatif dan data kuantitaif, menggunakan data primer dan data sekunder, penentuan informan digunakan teknik purposive sampling untuk teknik pengambilan sampel secara accidental sampling melalui penyebaran 100 kuesioner kepada wisatawan mancanegara yang menggunakan pelayanan shuttle bus dan teknik analisis data yang digunakan adalah deskriptif kualitatif dan skala likert. Berdasarkan hasil penyebaran kuesioner diketahui bahwa karakteristik wisatawan mancanegara terhadap jasa pelayanan shuttle bus pada perusahaan shuttle bus di Ubud : bertujuan rekreasi berjumlah 87 orang (87%, jenis kelamin perempuan berjumlah 55 orang (55%, berusia 16 - - 30 tahun berjumlah 68 orang (68%, belum menikah berjumlah 63 orang (63%, pendidikan Universitas berjumlah 58 orang (58%, berprofesi pegawai swasta berjumlah 43 orang (43%, berasal dari negara Jerman berjumlah 28 orang (28%, pendapatan rata-rata ? $500 berjumlah 64 orang (64% dan sumber informasi agen berjumlah 55 orang (55%. Mempunyai motivasi terhadap harga murah daripull factor motivasi berjumlah 55 orang (55% dan persepsi wisatawan mancanegara terhadap jasa pelayanan shuttle bus adalah

  10. Sexual behavior among truck drivers.

    Science.gov (United States)

    Singh, Rajiv Kumar; Joshi, Hari Shankar

    2012-01-01

    A cross-sectional study was conducted on Lucknow highway in Bareilly district of Uttar Pradesh to study the knowledge of truck drivers about HIV transmission and prevention and to study the sexual behaviour of these drivers with reference to HIV/AIDS. Age, marital status, education, income, drinking alcohol, length of stay away from home, knowledge about transmission and prevention of HIV, and HIV-prone behavior of truck drivers were studied. Chi-square, mean, and SD were calculated. In all, 289 (97.6%) drivers had heard about HIV/AIDS. Only 242 (81.8%) were aware of HIV transmission by heterosexual route. Misconceptions such as HIV transmission by mosquito bites, living in same room, shaking hands, and sharing food were found. Out of 174 (58.8%) who visited Commercial Sex Workers (CSW), 146 (83.9%) used a condom. 38 (12.8%) visited more than 5 CSW in the last 3 months. Time away from home on the road, marital status, alcohol use, and income class were associated with visiting CSW. High-risk behavior was established in the study population. Safe sex and use of condoms need to be promoted among the truck drivers and better condom availability needs to be assured on highways.

  11. Single and double distributed optical amplifier fiber bus networks with wavelength-division multiplexing for photonic sensors

    OpenAIRE

    Abad Valtierra, Silvia; López Amo, Manuel; López Higuera, José Miguel; Benito Pertusa, David; Unanua, Amaya; Achaerandio, Elisa

    1999-01-01

    Two different optical fiber bus networks are compared and demonstrated experimentally as means of gathering information from four wavelength-division-multiplexed photonic sensors. Both topologies include distributed amplification, which allows one to overcome the limitation in the maximum number of sensors that can be multiplexed in a single structure. Results obtained with a dual-bus topology are compared with those achieved with a single-bus network.

  12. Bus stops and pedestrian-motor vehicle collisions in Lima, Peru: a matched case-control study.

    Science.gov (United States)

    Quistberg, D Alex; Koepsell, Thomas D; Johnston, Brian D; Boyle, Linda Ng; Miranda, J Jaime; Ebel, Beth E

    2015-04-01

    To evaluate the relationship between bus stop characteristics and pedestrian-motor vehicle collisions. This was a matched case-control study where the units of study were pedestrian crossings in Lima, Peru. We performed a random sample of 11 police commissaries in Lima, Peru. Data collection occurred from February 2011 to September 2011. A total of 97 intersection cases representing 1134 collisions and 40 mid-block cases representing 469 collisions that occurred between October 2010 and January 2011, and their matched controls, were included. The main exposures assessed were presence of a bus stop and specific bus stop characteristics. The main outcome measure was occurrence of a pedestrian-motor vehicle collision. Intersections with bus stops were three times more likely to have a pedestrian-vehicle collision (OR 3.28, 95% CI 1.53 to 7.03), relative to intersections without bus stops. Formal and informal bus stops were associated with higher odds of a collision at intersections (OR 6.23, 95% CI 1.76 to 22.0 and OR 2.98, 1.37 to 6.49). At mid-block sites, bus stops on a bus-dedicated transit lane were also associated with collision risk (OR 2.36, 95% CI 1.02 to 5.42). All bus stops were located prior to the intersection, contrary to practices in most high-income countries. In urban Lima, the presence of a bus stop was associated with a threefold increase in risk of a pedestrian collision. The highly competitive environment among bus companies may provide an economic incentive for risky practices, such as dropping off passengers in the middle of traffic and jockeying for position with other buses. Bus stop placement should be considered to improve pedestrian safety. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  13. Magnitude and correlates of bird collisions at glass bus shelters in an urban landscape.

    Science.gov (United States)

    Barton, Christine M; Riding, Corey S; Loss, Scott R

    2017-01-01

    Wildlife residing in urban landscapes face many human-related threats to their survival. For birds, collision with glass on manmade structures has been identified as a major hazard, causing hundreds of millions of avian fatalities in North America every year. Although research has investigated factors associated with bird-glass collision mortality at buildings, no prior studies have focused on bird fatalities at glass-walled bus shelters. Our objectives in this study were to describe the magnitude of bird-bus shelter collisions in the city of Stillwater, Oklahoma and assess potential predictors of collision risk, including characteristics of shelters (glass area) and surrounding land cover (e.g., vegetative features). We surveyed for bird carcasses and indirect collision evidence at 18 bus shelters over a five-month period. Linear regression and model selection results revealed that the amount of glass on shelters and the area of lawn within 50 m of shelters were both positively related to fatal bird collisions; glass area was also positively associated with observations of collision evidence on glass surfaces. After accounting for scavenger removal of carcasses, we estimate that a minimum of 34 birds are killed each year between May and September by collision with the 36 bus shelters in the city of Stillwater. While our study provides an initial look at bird fatalities at bus shelters, additional research is needed to generate a large-scale estimate of collision mortality and to assess species composition of fatalities at a national scale. Designing new bus shelters to include less glass and retrofitting existing shelters to increase visibility of glass to birds will likely reduce fatal bird collisions at bus shelters and thus reduce the cumulative magnitude of anthropogenic impacts to birds in cities.

  14. Key drivers of airline loyalty.

    Science.gov (United States)

    Dolnicar, Sara; Grabler, Klaus; Grün, Bettina; Kulnig, Anna

    2011-10-01

    This study investigates drivers of airline loyalty. It contributes to the body of knowledge in the area by investigating loyalty for a number of a priori market segments identified by airline management and by using a method which accounts for the multi-step nature of the airline choice process. The study is based on responses from 687 passengers. Results indicate that, at aggregate level, frequent flyer membership, price, the status of being a national carrier and the reputation of the airline as perceived by friends are the variables which best discriminate between travellers loyal to the airline and those who are not. Differences in drivers of airline loyalty for a number of segments were identified. For example, loyalty programs play a key role for business travellers whereas airline loyalty of leisure travellers is difficult to trace back to single factors. For none of the calculated models satisfaction emerged as a key driver of airline loyalty.

  15. Company closure and mortality in a Greek bus company.

    Science.gov (United States)

    Drivas, S; Rachiotis, G; Stamatopoulos, G; Hadjichristodoulou, C; Chatzis, C

    2013-04-01

    Previous studies strongly support an association between unemployment and an increased risk of morbidity and mortality. To assess the impact of company closure on the mortality of redundant employees. The mortality of a cohort of male ex-employees of the Athens Bus Transportation Company Epixirisi Astikon Siginonion (EAS) was followed from September 1992 to October 1993. Information on causes of death was obtained from death certificates and classified according to the ninth revision of the International Classification of Diseases. The expected number of deaths was calculated based on 5 year age groups. Cause-specific mortality rates for the Greek population were obtained from the Greek National Statistics Service, and standardized mortality rates (SMRs) were calculated using population census data for 1991. The cohort consisted of 4400 subjects. Thirty deaths were recorded. Crude mortality was significantly elevated (SMR = 1.75; 95% confidence interval (CI) 1.18-2.5; Table 1). A statistically significant excess in mortality from ischaemic heart disease was shown (18 deaths observed; SMR = 4.83; 95% CI 2.86-7.64). One year before the privatization and closure of EAS (1991), nine deaths were recorded among its 7400 employees (SMR = 0.34). Our study found a significant increase in all-cause mortality and death from ischaemic heart disease in male workers who were made redundant and suggested a significant negative impact of unemployment resulting from company closure on mortality. These results may signal future mortality patterns in Greece if the current climate of austerity and recession continues.

  16. Designing Sustainable Public Transportation: Integrated Optimization of Bus Speed and Holding Time in a Connected Vehicle Environment

    Directory of Open Access Journals (Sweden)

    Wei Wu

    2016-11-01

    Full Text Available Developing public transportation and giving priority to buses is a feasible solution for improving the level of public transportation service, which facilitates congestion alleviation and prevention, and contributes to urban development and city sustainability. This paper presents a novel bus operation control strategy including both holding control and speed control to improve the level of service of transit systems within a connected vehicle environment. Most previous work focuses on optimization of signal timing to decrease the bus signal delay by assuming that holding control is not applied; the speed of buses is given as a constant input and the acceleration and deceleration processes of buses can be neglected. This paper explores the benefits of a bus operation control strategy to minimize the total cost, which includes bus signal delay, bus holding delay, bus travel delay, acceleration cost due to frequent stops and intense driving. A set of formulations are developed to explicitly capture the interaction between bus holding control and speed control. Experimental analysisand simulation tests have shown that the proposed integrated operational model outperforms the traditional control, speed control only, or holding control only strategies in terms of reducing the total cost of buses. The sensitivity analysis has further demonstrated the potential effectiveness of the proposed approach to be applied in a real-time bus operation control system under different levels of traffic demand, bus stop locations, and speed limits.

  17. ANALYSIS OF ENERGY EFFICIENCY OF BUTT END CONNECTIONS CONSTRUCTION OF SIDE BUS PACKAGES AND CURRENT FEEDERS OF GRAPHITIZATION FURNACE

    Directory of Open Access Journals (Sweden)

    D. S. Yarymbash

    2013-12-01

    Full Text Available The methods of the electrical parameter identification of the butt end bus connections of graphitization furnace current feeders with side bus packets basing on the conjugate three-dimensional mathematical models of electromagnetic and electro-thermal processes are presented. The finite element methods of solving partial derivatives vector equations systems in three-dimensional domain are used. The temperature dependences of the electro-physical properties and thermo-physical properties of the active materials and the external bus surface conditions of natural convection and radiation heat transfer are taken into account. The high accuracy and computational efficiency numerical calculations by using variations of the finite elements densities in the computational domain are produced. The finite elements densities in the domains of the magnetic field concentration are increased. The basic and new designs of butt end bus systems of AC graphitization furnace are considered. The calculations of geometric parameters of the bus conductors by using the equality criterion of active loss densities are presented. The currents, voltage drops, current density, electrical losses densities, active and inductive resistance of bus of side bus packages, butt end bus connections and graphite feeders are identified. The energy efficiency of butt end graphitization furnace electrical connections of different numbers of parallel buses is analyzed. The technical decisions to reduce weight, active and reactive power losses of bus butt end connections are substantiated.

  18. Biological drivers of zooplankton patchiness.

    Science.gov (United States)

    Folt; Burns

    1999-08-01

    Until recently, biological drivers of plankton aggregation were under-appreciated, because most studies concentrated on physical processes. New technological advances, novel experiments and theory have shifted focus to the pivotal role of behaviour in plankton patch dynamics. Our review highlights four biological drivers of zooplankton spatial patchiness and brings together recent research on well studied marine and freshwater taxa, primarily copepods and cladocerans. Diverse and powerful behavioural responses by zooplankton to physical and chemical signals are shown to contribute to the formation and breakdown of zooplankton patches over several different spatial scales.

  19. Schoolbus driver performance can be improved with driver training ...

    African Journals Online (AJOL)

    In South Africa (SA), the school transport industry provides millions of children with a means of travelling to and from school. The industry has, however, been reported to be plagued by widespread safety concerns. The consequent road traffic incidents have often been attributed to driver factors, including driving in excess of ...

  20. Timetable optimization for single bus line based on hybrid vehicle size model

    Directory of Open Access Journals (Sweden)

    Daniel(Jian Sun

    2015-06-01

    Full Text Available This study proposes a flexible timetable optimization method based on hybrid vehicle size model to tackle the bus demand fluctuations in transit operation. Three different models for hybrid vehicle, large vehicle and small vehicle are built in this study, respectively. With the operation data of Shanghai Transit Route 55 at peak and off-peak hours, a heuristic algorithm was proposed to solve the problem. The results indicate that the hybrid vehicle size model excels the other two modes both in the total time and total cost. The study verifies the rationality of the strategy of hybrid vehicle size model and highlights the importance of the adaptive vehicle size in dealing with the bus demand fluctuation. The main innovation of the study is that unlike traditional timetables, the arrangement of the scheduling interval and the corresponding bus type or size are both involved in the timetable of hybrid vehicle size bus mode, which will be more effective to solve the problem of passenger demand fluctuation. Findings from this research would provide a new perspective to improve the level of regular bus service.

  1. Degenerative hairlets on the vestibular sensory cells in mutant bustling (BUS/Idr) mice.

    Science.gov (United States)

    Moriyama, K; Hashimoto, R; Hanai, A; Yoshizaki, N; Yonezawa, S; Otani, H

    1997-01-01

    The bustling mouse (BUS/Idr: bus) is a mutant mouse strain which exhibits deafness, bustling/hyperkinetic behaviour and functional disorders seemingly related to the vestibular system. This phenotype develops in homozygous (bus/bus) mice and has been shown from cross experiments to be genetically induced by a single autosomal recessive gene. We previously detected, with light and electron microscopy, post-natal degeneration of the inner ear sensory cells in homozygotes. In the present study, we examined, by electron microscopy, the development of pathological changes in the sensory epithelia of the macula acustica and crista ampullaris of homozygous mice of various ages, paying special attention to the detailed morphology of the sensory hairlets. The homozygous mice exhibited specific pathological changes: a decrease in the number of hairs; disarrangement of the kinocilium-stereocilia pattern; and, fused and/or very large stereocilia. Homozygotes also frequently exhibited apical cytoplasmic herniation, or bleb of hair cells, as well as a degenerated kinocilium in the sensory epithelium. Heterozygotes showed similar changes, but to a lesser degree and frequency. As for the vestibular organs, similar pathological changes had developed at day, 17 of gestation. These pathological findings and onset suggest that the BUS mouse may be a mutant mouse strain distinct from other reported strains which display similar behaviour, and may be a useful animal model for the study of human degenerative vestibular disorders.

  2. Design of bus-on-chip core for micro-satellite avionics

    Science.gov (United States)

    Liu, Youjun; You, Zheng; Li, Bin; Zhang, Xiangqi; Meng, Ziyang

    2007-11-01

    This paper discusses a layout of bus-on-chip core referring to SoC thinking which is composed of six sections based on a physical chip of FPGA: multi-Processor cache coherence unit, external bus control module, TT&C module, Ethernet Mac interface, EDAC/DMA module, and AMBA bridges. Multi-processor cache coherence unit, as a key part of the bus core, is used to serve the rapid parallel computing by means of the breakthrough of write/read speed of EMS memory and enhances the reliability of OBC with the service of supporting the hot standby of redundancy and the reconfiguration of fault-tolerance. External bus control module is made to support the PnP of external components applying varieties of buses, which is designed by means of soft-core in order to adapt the variation of macro-design and improve the flexibility of external application. TT&C module is the interface of subsystems of telemetry, telecommand and communication, which involves the protocols of HDLC. Ethernet Mac interface based on TCP/IP acts as the access of ISL for formation flying, constellation, etc. EDAC/DMA module mainly manages the data exchange between AMBA bus and RAM, and assigns DMA for the payloads.

  3. Optimizing Bus Frequencies under Uncertain Demand: Case Study of the Transit Network in a Developing City

    Directory of Open Access Journals (Sweden)

    Zhengfeng Huang

    2013-01-01

    Full Text Available Various factors can make predicting bus passenger demand uncertain. In this study, a bilevel programming model for optimizing bus frequencies based on uncertain bus passenger demand is formulated. There are two terms constituting the upper-level objective. The first is transit network cost, consisting of the passengers’ expected travel time and operating costs, and the second is transit network robustness performance, indicated by the variance in passenger travel time. The second term reflects the risk aversion of decision maker, and it can make the most uncertain demand be met by the bus operation with the optimal transit frequency. With transit link’s proportional flow eigenvalues (mean and covariance obtained from the lower-level model, the upper-level objective is formulated by the analytical method. In the lower-level model, the above two eigenvalues are calculated by analyzing the propagation of mean transit trips and their variation in the optimal strategy transit assignment process. The genetic algorithm (GA used to solve the model is tested in an example network. Finally, the model is applied to determining optimal bus frequencies in the city of Liupanshui, China. The total cost of the transit system in Liupanshui can be reduced by about 6% via this method.

  4. A preliminary survey analysis of school shuttle bus system towards smart mobility solutions

    Science.gov (United States)

    Yue, Wong Seng; Hoy, Cheong Wan; Chye, Koh Keng

    2017-10-01

    Mobility and accessibility are crucial indicators of urban development. Public transport in the urban areas came into existence to fulfil transportation needs as well as mobility and accessibility demands. Ridership can be affected by the quality and quantity of transit service. However, technical improvements are needed for such as real-time bus information, controlling run time and headway delay. Thus, this paper is aimed to carry out a preliminary survey to determine the problems of school shuttle bus that faced by the students in a selected educational institution, their perceptions of using shuttle bus tracking and information mobile application and impacts of real-time information of public transits on bus ridership and towards smart mobility solutions. Efficient public transportation system needs further investigation about the role of mobile application for the bus tracking system in supporting smart mobility actions and real-time information. The proposed application also provides a smart solution for the management of public infrastructures and urban facilities in Malaysia in future. Eventually, this study opens an opportunity to improve Malaysian quality of life on the public value that created for the city as a whole.

  5. Road rage and road traffic accidents among commercial vehicle drivers in Lahore, Pakistan.

    Science.gov (United States)

    Shaikh, M A; Shaikh, I A; Siddiqui, Z

    2012-04-01

    Road rage and road traffic accidents increase the burden of morbidity and mortality in a population. A cross-sectional survey with convenience sampling was conducted among commercial vehicle drivers in Lahore, Pakistan (n = 901) to record their behaviours/experiences regarding road rage and road traffic accidents. Respondents were asked about incidents of shouting/cursing/rude gestures or threats to physically hurt the person/vehicle, by others or themselves, in the previous 24 hours or 3 months, and their involvement in road traffic accidents in the previous 12 months. Auto-rickshaw drivers were significantly more likely to report various road rage experiences/behaviours and involvement in accidents compared with bus and wagon drivers. A total of 112 respondents (12.4%) reported being involved in a road traffic accident in the previous 12 months but traffic police did not record the accident in 52.7% of cases. The results of this study underline the need to improve road safety in Pakistan.

  6. Driver style and driver skills – clustering drivers differing in their potential danger in traffic

    DEFF Research Database (Denmark)

    Martinussen, Laila Marianne; Møller, Mette; Prato, Carlo Giacomo

    The Driver Behavior Questionnaire (DBQ) and the Driver Skill Inventory (DSI) are two of the most frequently used measures of driving style and driving skill. The motivation behind the present study was to test drivers’ insight into their own driving ability based on a combined use of the DBQ and ...... problematic groups of the population in the attempt to improve road safety nationwide....... others, as well as heterogeneity across the population was observed. The present findings highlight the need to look into driver’s attitudes towards safety, in order to improve the motivation to drive safely. Information from this study is useful for interventions to be able to target specific...

  7. Drivers and Limits for Transport

    DEFF Research Database (Denmark)

    Kristensen, Niels Buus; Nielsen, Thomas A. Sick; Gudmundsson, Henrik

    This report summarizes key outcomes of the study ’Drivers and Limits’ that was supported for the period 2009-2013 by a research grant from the Danish Strategic Research Council. The project investigated - for the empirical context of Denmark - key driving forces behind transport growth, as well...

  8. Alcohol and marijuana use while driving--an unexpected crash risk in Pakistani commercial drivers: a cross-sectional survey

    Directory of Open Access Journals (Sweden)

    Mir Mohammed

    2012-02-01

    Full Text Available Abstract Background A significant proportion of road traffic crashes are attributable to alcohol and marijuana use while driving globally. Sale and use of both substances is illegal in Pakistan and is not considered a threat for road traffic injuries. However literature hints that this may not be the case. We did this study to assess usage of alcohol and marijuana in Pakistani commercial drivers. Methods A sample of 857 commercial bus and truck drivers was interviewed in October 2008 at the largest commercial vehicle station in Rawalpindi and Islamabad, Pakistan. Time location cluster sampling was used to select the subjects and a structured questionnaire was used to assess the basic demographic profile, substance abuse habits of the drivers while on the road, and reasons for usage of illicit substances while driving were recorded. Self reported information was collected after obtaining informed consent. Chi square and fisher exact tests were used to assess differences between groups and logistic regression was used to identify significant associations between driver characteristics and alcohol and marijuana use. Results Almost 10% of truck drivers use alcohol while driving on Pakistani roads. Marijuana use is almost 30% in some groups. Statistically different patterns of usage are seen between population subgroups based on age, ethnicity, education, and marital status. Regression analysis shows association of alcohol and marijuana use with road rage and error behaviours, and also with an increased risk of being involved in road crashes. The reported reasons for using alcohol or marijuana show a general lack of awareness of the hazardous nature of this practice among the commercial driver population. Conclusion Alcohol and marijuana use is highly prevalent in Pakistani commercial drivers. The issue needs to be recognized by concerned authorities and methods such as random breath tests and sobriety check points need to be employed for proper law

  9. Anthropogenic Drivers of Ecosystem Change: an Overview

    Directory of Open Access Journals (Sweden)

    Gerald C. Nelson

    2006-12-01

    Full Text Available This paper provides an overview of what the Millennium Ecosystem Assessment (MA calls "indirect and direct drivers" of change in ecosystem services at a global level. The MA definition of a driver is any natural or human-induced factor that directly or indirectly causes a change in an ecosystem. A direct driver unequivocally influences ecosystem processes. An indirect driver operates more diffusely by altering one or more direct drivers. Global driving forces are categorized as demographic, economic, sociopolitical, cultural and religious, scientific and technological, and physical and biological. Drivers in all categories other than physical and biological are considered indirect. Important direct drivers include changes in climate, plant nutrient use, land conversion, and diseases and invasive species. This paper does not discuss natural drivers such as climate variability, extreme weather events, or volcanic eruptions.

  10. Driver ASICs for Advanced Deformable Mirrors Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The overall goal of the SBIR program is to develop a new Application Specified Integrated Circuit (ASIC) driver to be used in driver electronics of a deformable...

  11. Managing drivers of innovation in construction networks

    NARCIS (Netherlands)

    Bossink, B.A.G.

    2004-01-01

    Various drivers of construction innovation are distinguished and classified in four distinctive categories: environmental pressure, technological capability, knowledge exchange, and boundary spanning. Innovation drivers in these categories are active at the transfirm, intrafirm, and interfirm level

  12. Older drivers' foot movements : traffic tech.

    Science.gov (United States)

    2017-07-01

    This study explored how older drivers use their accelerator and : brake pedals, to identify characteristics that could pose an increased : risk of a pedal application error. The study also explored whether : driver-vehicle fit was related to these ch...

  13. Security Threat Assessments for Hazmat Drivers

    National Research Council Canada - National Science Library

    Rothberg, Paul F

    2005-01-01

    ...). This provision seeks to reduce some of the security risks associated with hazardous materials (hazmat) transportation by requiring a security threat assessment of drivers with a hazmat endorsement on their commercial drivers license...

  14. A nonparametric efficiency analysis of bus subsystem in Belgrade city, using DEA methods

    Directory of Open Access Journals (Sweden)

    Ćiraković Lazar S.

    2014-01-01

    Full Text Available One of the most important principles in the company is the principle of efficiency which consists in achieving the highest possible economic effects with minimum economic investment. In this paper, we present a nonparametric efficiency analysis, bus subsystems of public transport passengers Belgrade City, a sample of five small, three medium and two large companies. It was shown that the overall bus transport system has a low level of overall efficiency, only 0.66%. It was found that the economies of scale has no significant impact on the level of efficiency when it comes to classification that was generated for this study. Small and medium companies are in a worse situation than large companies when it comes to economies of scale. These results should indicate the necessity of the transport system and bus companies organizational and technological redesign.

  15. An Extended IEEE 118-Bus Test System With High Renewable Penetration

    Energy Technology Data Exchange (ETDEWEB)

    Pena, Ivonne; Martinez-Anido, Carlo Brancucci; Hodge, Bri-Mathias

    2018-01-01

    This article describes a new publicly available version of the IEEE 118-bus test system, named NREL-118. The database is based on the transmission representation (buses and lines) of the IEEE 118-bus test system, with a reconfigured generation representation using three regions of the US Western Interconnection from the latest Western Electricity Coordination Council (WECC) 2024 Common Case [1]. Time-synchronous hourly load, wind, and solar time series are provided for over one year (8784 hours). The public database presented and described in this manuscript will allow researchers to model a test power system using detailed transmission, generation, load, wind, and solar data. This database includes key additional features that add to the current IEEE 118-bus test model, such as: the inclusion of 10 generation technologies with different heat rate functions, minimum stable levels and ramping rates, GHG emissions rates, regulation and contingency reserves, and hourly time series data for one full year for load, wind and solar generation.

  16. Analysis of bus width and delay on a fully digital signum nonlinearity chaotic oscillator

    KAUST Repository

    Mansingka, Abhinav S.

    2012-07-29

    This paper introduces the first fully digital implementation of a 3rd order ODE-based chaotic oscillator with signum nonlinearity. A threshold bus width of 12-bits for reliable chaotic behavior is observed, below which the system output becomes periodic. Beyond this threshold, the maximum Lyapunov exponent (MLE) is shown to improve up to a peak value at 16-bits and subsequently decrease with increasing bus width. The MLE is also shown to gradually increase with number of introduced internal delay cycles until a peak value at 14 cycles, after which the system loses chaotic properties. Introduced external delay cycles are shown to rotate the attractors in 3-D phase space. Bus width and delay elements can be independently modulated to optimize the system to suit specifications. The experimental results of the system show low area and high performance on a Xilinx Virtex 4 FPGA with throughput of 13.35 Gbits/s for a 32-bit implementation.

  17. The high current bus-bars of the LHC from conception to manufacture

    CERN Document Server

    Belova, L; Perinet-Marquet, J-L; Urpin, C

    2006-01-01

    The main magnets of the LHC are series-connected electrically in different excitation circuits by means of superconducting bus-bars, carrying a maximum current of 13 kA. These superconducting bus-bars consist of a superconducting cable thermally and electrically coupled to a copper section all along length. The function of the copper section is essentially to provide an alternative path for the magnet current in case the superconducting cable loses its superconductivity and returns to normal state because of a transient system disturbance or normal zone propagation coming from the neighboring magnets. When a superconducting bus-bar quenches to normal state its temperature must always stay below a safe values of about 100 ° C while the copper is conducting. With regard to that, a quench signal is initiated, which in turn triggers the ramping down of the current from 13000 A to 0....

  18. Bus Access Optimization for Distributed Embedded Systems Based on Schedulability Analysis

    DEFF Research Database (Denmark)

    Pop, Paul; Eles, Petru; Peng, Zebo

    2000-01-01

    We present an approach to bus access optimization and schedulability analysis for the synthesis of hard real-time distribution embedded systems. The communication model is based on a time-triggered protocol. We have developed an analysis for the communication delays proposing four different messa...... scheduling policies over a time-triggered communication channel. Optimization strategies for the bus access scheme are developed, and the four approaches to message scheduling are compared using extensive experiments.......We present an approach to bus access optimization and schedulability analysis for the synthesis of hard real-time distribution embedded systems. The communication model is based on a time-triggered protocol. We have developed an analysis for the communication delays proposing four different message...

  19. Increasing throughput of multiplexed electrical bus in pipe-lined architecture

    Science.gov (United States)

    Asaad, Sameh; Brezzo, Bernard V; Kapur, Mohit

    2014-05-27

    Techniques are disclosed for increasing the throughput of a multiplexed electrical bus by exploiting available pipeline stages of a computer or other system. For example, a method for increasing a throughput of an electrical bus that connects at least two devices in a system comprises introducing at least one signal hold stage in a signal-receiving one of the two devices, such that a maximum frequency at which the two devices are operated is not limited by a number of cycles of an operating frequency of the electrical bus needed for a signal to propagate from a signal-transmitting one of the two devices to the signal-receiving one of the two devices. Preferably, the signal hold stage introduced in the signal-receiving one of the two devices is a pipeline stage re-allocated from the signal-transmitting one of the two devices.

  20. Model of Bus and Urban Rail Transfer Behavior Based on General Cost Function

    Directory of Open Access Journals (Sweden)

    Jielin Zhang

    2015-02-01

    Full Text Available To design an efficient feeder bus route network and develop a better integrated intermodal system, it is necessary to study travelers' mode choice behavior. This paper focuses on the transfer behavior model between bus transit and urban rail. Based on the theory of Binary logit (BL model, a new generalized travel cost model (GTC which considers the influencing factors including travel distance, travel cost, and transfer time is established, and the choice model of bus and urban rail with the influence of transfer behavior is built. Then, a deeper analyzing process is conducted to get the significance of the model. In addition, the accuracy and feasibility of the model are verified through using the real survey data. Finally, according to the model results, some countermeasures consisting of improving the transfer condition and optimizing price charging pattern are given to promote a better public transportation system.

  1. Uncertainty in Bus Arrival Time Predictions: Treating Heteroscedasticity With a Metamodel Approach

    DEFF Research Database (Denmark)

    O'Sullivan, Aidan; Pereira, Francisco Camara; Zhao, Jinhua

    2016-01-01

    Arrival time predictions for the next available bus or train are a key component of modern traveler information systems (TISs). A great deal of research has been conducted within the intelligent transportation system community in developing an assortment of different algorithms that seek...... to increase the accuracy of these predictions. However, the inherent stochastic and nonlinear nature of these systems, particularly in the case of bus transport, means that these predictions suffer from variable sources of error, stemming from variations in weather conditions, bus bunching, and numerous other...... of heteroscedasticity in the predictions is demonstrated and then a metamodel approach is deployed, which augments existing predictive systems using quantile regression to place bounds on the associated error. As a case study, this approach is applied to data from a real-world TIS in Boston. This method allows bounds...

  2. Research and design of intelligent distributed traffic signal light control system based on CAN bus

    Science.gov (United States)

    Chen, Yu

    2007-12-01

    Intelligent distributed traffic signal light control system was designed based on technologies of infrared, CAN bus, single chip microprocessor (SCM), etc. The traffic flow signal is processed with the core of SCM AT89C51. At the same time, the SCM controls the CAN bus controller SJA1000/transceiver PCA82C250 to build a CAN bus communication system to transmit data. Moreover, up PC realizes to connect and communicate with SCM through USBCAN chip PDIUSBD12. The distributed traffic signal light control system with three control styles of Vehicle flux, remote and PC is designed. This paper introduces the system composition method and parts of hardware/software design in detail.

  3. IEEE 1394/firewire a low cost, high speed, digital serial bus

    Energy Technology Data Exchange (ETDEWEB)

    Gaunt, R.

    1997-05-01

    Does the world need yet another 1/0 bus standard? If you need fast and cheap serial video communication, then the answer is yes. As technology advances, so too must data transport mechanisms advance. You can`t expect RS-232 to support real-time digital video, and if you can`t afford expensive professional serial video interfaces, (such as Sony`s Serial Digital Interface), Firewire may be a good solution. IEEE 1394, or commonly known as Firewire, is a general purpose serial bus that meets many of the 1/0 needs of today`s video and multimedia developers. For those of you who only read the first paragraph, here`s Firewire in a nutshell: It provides a guaranteed transfer rate of 10OMbps or 20OMbps of digital data (such as video direct from camera to computer), over an inexpensive, non-proprietary serial bus. Here is a list of its features.

  4. BUS TRIPS—A Self-Management Program for People with Cognitive Impairments after Stroke

    Directory of Open Access Journals (Sweden)

    Emma Carlstedt

    2017-11-01

    Full Text Available Stroke is a major cause of disability worldwide and different types of impairments can affect the individual’s ability to manage everyday activities such as travel that is essential for participation in society. The purpose of this study was to investigate the feasibility of a new self-management intervention (BUS TRIPS focusing on travelling by bus, and potential contributions to an improved ability to travel by bus for people with cognitive impairments after stroke. This is a pilot study of five individuals, utilizing a multiple case study design with a mixed methods approach. Assessments (Stroke Impact Scale, General Self-Efficacy Scale and Life Satisfaction Scale-11, Item 1 were performed before, two weeks after, and three months after the program. The data collection also comprised reflection notes from the group leaders (an occupational therapist and a physiotherapist, a semi-structured group interview and an individual phone survey. The feasibility of the intervention was presented in four sub-categories: (1 appreciated group format despite too short sessions; (2 the importance of skilled leaders and motivated participants; (3 session material adequate but needs minor revision to fit the target group; and (4 homework is valuable but reflective group discussions must be supported. The narratives of each case showed that all participants made some progress related to travelling by bus, but the overall positive results could not be verified by all of the quantitative assessments. We conclude that the BUS TRIPS intervention is feasible and can potentially contribute to an improved ability to travel by bus for the target group. Future studies is called for, and should focus on recruitment challenges, to clarify assessments that would be suitable to use in larger scale clinical trials and during subsequent implementation in clinical practice.

  5. Particulates and noise exposure during bicycle, bus and car commuting: A study in three European cities.

    Science.gov (United States)

    Okokon, Enembe O; Yli-Tuomi, Tarja; Turunen, Anu W; Taimisto, Pekka; Pennanen, Arto; Vouitsis, Ilias; Samaras, Zissis; Voogt, Marita; Keuken, Menno; Lanki, Timo

    2017-04-01

    In order to curb traffic-related air pollution and its impact on the physical environment, contemporary city commuters are encouraged to shift from private car use to active or public transport modes. However, personal exposures to particulate matter (PM), black carbon and noise during commuting may be substantial. Therefore, studies comparing exposures during recommended modes of transport versus car trips are needed. We measured personal exposure to various-sized particulates, soot, and noise during commuting by bicycle, bus and car in three European cities: Helsinki in Finland, Rotterdam in the Netherlands and Thessaloniki in Greece using portable monitoring devices. We monitored commonly travelled routes in these cities. The total number of one-way trips yielding data on any of the measured parameters were 84, 72, 94 and 69 for bicycle, bus, closed-window car and open-window car modes, respectively. The highest mean PM 2.5 (85µg/m 3 ), PM 10 (131µg/m 3 ), black carbon (10.9µg/m 3 ) and noise (75dBA) levels were recorded on the bus, bus (again), open-window car and bicycle modes, respectively, all in Thessaloniki, PM and soot concentrations were generally higher during biking and taking a bus than during a drive in a a car with closed windows. Ratios of bike:car PM 10 ranged from 1.1 in Thessaloniki to 2.6 in Helsinki, while bus:car ratios ranged from in 1.0 in Rotterdam to 5.6 in Thessaloniki. Higher noise levels were mostly recorded during bicycle rides. Based on our study, active- and public-transport commuters are often at risk of higher air pollution and noise exposure than private car users. This should be taken into account in urban transportation planning. Copyright © 2017 Elsevier Inc. All rights reserved.

  6. Implementation of a Cooking Bus intervention to support cooking in schools in Wales, UK

    Science.gov (United States)

    Segrott, Jeremy; Holliday, Jo; Murphy, Simon; Macdonald, Sarah; Roberts, Joan; Moore, Laurence; Phillips, Ceri

    2017-01-01

    Purpose The teaching of cooking is an important aspect of school-based efforts to promote healthy diets among children, and is frequently done by external agencies. Within a limited evidence base relating to cooking interventions in schools, there are important questions about how interventions are integrated within school settings. The purpose of this paper is to examine how a mobile classroom (Cooking Bus) sought to strengthen connections between schools and cooking, and drawing on the concept of the sociotechnical network, theorise the interactions between the Bus and school contexts. Design/methodology/approach Methods comprised a postal questionnaire to 76 schools which had received a Bus visit, and case studies of the Bus’ work in five schools, including a range of school sizes and urban/rural locations. Case studies comprised observation of Cooking Bus sessions, and interviews with school staff. Findings The Cooking Bus forged connections with schools through aligning intervention and schools’ goals, focussing on pupils’ cooking skills, training teachers and contributing to schools’ existing cooking-related activities. The Bus expanded its sociotechnical network through post-visit integration of cooking activities within schools, particularly teachers’ use of intervention cooking kits. Research limitations/implications The paper highlights the need for research on the long-term impacts of school cooking interventions, and better understanding of the interaction between interventions and school contexts. Originality/value This paper adds to the limited evidence base on school-based cooking interventions by theorising how cooking interventions relate to school settings, and how they may achieve integration. PMID:28725120

  7. A Feeder-Bus Dispatch Planning Model for Emergency Evacuation in Urban Rail Transit Corridors.

    Science.gov (United States)

    Wang, Yun; Yan, Xuedong; Zhou, Yu; Zhang, Wenyi

    The mobility of modern metropolises strongly relies on urban rail transit (URT) systems, and such a heavy dependence causes that even minor service interruptions would make the URT systems unsustainable. This study aims at optimally dispatching the ground feeder-bus to coordinate with the urban rails' operation for eliminating the effect of unexpected service interruptions in URT corridors. A feeder-bus dispatch planning model was proposed for the collaborative optimization of URT and feeder-bus cooperation under emergency situations and minimizing the total evacuation cost of the feeder-buses. To solve the model, a concept of dummy feeder-bus system is proposed to transform the non-linear model into traditional linear programming (ILP) model, i.e., traditional transportation problem. The case study of Line #2 of Nanjing URT in China was adopted to illustrate the model application and sensitivity analyses of the key variables. The modeling results show that as the evacuation time window increases, the total evacuation cost as well as the number of dispatched feeder-buses decrease, and the dispatched feeder-buses need operate for more times along the feeder-bus line. The number of dispatched feeder-buses does not show an obvious change with the increase of parking spot capacity and time window, indicating that simply increasing the parking spot capacity would cause huge waste for the emergent bus utilization. When the unbalanced evacuation demand exists between stations, the more feeder-buses are needed. The method of this study will contribute to improving transportation emergency management and resource allocation for URT systems.

  8. CMS Tracker Readout Prototype Front-End Driver PCI Mezzanine Card (Mk1) (connector side)

    CERN Multimedia

    J.Coughlan

    1998-01-01

    The tracking system of the CMS detector at the LHC employs Front End Driver (FED) cards to digitise, buffer and sparsify analogue data arriving via optical links from on detector pipeline chips. This paper describes a prototype version of the FED based upon the popular commercial PCI bus Mezzanine Card (PMC) form factor. The FED-PMC consists of an 8 channel, 9 bit ADC, card, providing a 1 MByte data buffer and operating at the LHC design frequency of 40 MHz. The core of the card is a re-programmable FPGA which allows the functionality of the card to be conveniently modified. The card is supplied with a comprehensive library of C routines.The PMC form factor allows the card to be plugged onto a wide variety of processor carrier boards and even directly into PCI based PCs. The flexibility of the FPGA based design permits the card to be used in a variety of ADC based applications.

  9. OPTO-22 DRIVER. OPTO-22 Driver for LabView

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, G.W. [Lawrence Livermore National Lab., CA (United States)

    1991-01-28

    OPTO-22 DRIVER consists of a set of LabVIEW (National Instruments, Austin, TX) virtual instruments (VIs) that handle low-level communications with signal conditioning equipment by Opto-22 (Huntington Beach, CA). The OPTOMUX protocol is support, which requires the use of a serial port and supports multidrop communications. With this package, users can connect hundreds of Opto-22 modules to their LabVIEW system and access all features of the hardware, including analog and digital input and outputs.

  10. PERFORMANCE OF A NEW BUS ASSIGNMENT ALGORITHM FOR AN ATM SWITCH FABRIC

    Directory of Open Access Journals (Sweden)

    J. Sánchez

    2004-08-01

    Full Text Available This paper presents the results of the performance evaluation, through analytical and simulation models, of a HighSpeed Packet Switch with a New Bus Assignment Algorithm, designed and developed at the Research andAdvanced Studies Center of National Polytechnic Institute in Guadalajara, México (CINVESTAV-GDL. The analyticalmodel is tested under two different arrival processes: Binomial and Poisson distributions. The simulation model istested with two bus assignment algorithms: Fixed Start and Rotated Start . The performance parameters consideredare: Cell Loss Rate, Delay and Throughput.

  11. Experimental Measures of Bus Comfort Levels Using Kinematic Parameters Recorded by Smartphone

    Energy Technology Data Exchange (ETDEWEB)

    Aquila, S. dell' ; Eboli, L.; Futia, G.; Mazzulla, G.; Pungillo, G.

    2016-07-01

    Comfort on board plays an essential role in the levels of satisfaction of a bus service perceived by passengers. The aim of this paper is to propose a measure of comfort based on two kinds of data: perceptions of passengers (subjective data) and accelerations of bus (objective data). For the collection of subjective data a questionnaire was addressed to a sample of university students, while a smartphone, equipped with GPS device and 3-axis accelerometer, was used to record the accelerations. Based on the recorded parameters, we determined the thresholds of the acceleration values beyond which the level of comfort cannot be considered as good.. (Author)

  12. Codes for a priority queue on a parallel data bus. [Deep Space Network

    Science.gov (United States)

    Wallis, D. E.; Taylor, H.

    1979-01-01

    Some codes for arbitration of priorities among subsystem computers or peripheral device controllers connected to a parallel data bus are described. At arbitration time, several subsystems present wire-OR, parallel code words to the bus, and the central computer can identify the subsystem of highest priority and determine which of two or more transmission services the subsystem requires. A mathematical discussion of the optimality of the codes with regard to the number of subsystems that may participate in the scheme for a given number of wires is presented along with the number of services that each subsystem may request.

  13. Converter Power Density Increase using Low Inductive Integrated DC-link Capacitor/Bus

    DEFF Research Database (Denmark)

    Trintis, Ionut; Franke, Toke; Rannested, Bjørn

    2015-01-01

    The power losses in switching devices have a direct effect on the maximum converter power. For a voltage source converter, the DC-link bus has a major influence on the power loss and safe operating area of the power devices. The Power Ring Film CapacitorTM integrated with an optimized bus structu...... has a measured inductance of around 5 nH. That allows the converter to switch with low turn-off losses, and allows the safe operation at higher dc-link voltages. This paper investigates the power transfer limits of a ShowerPower® cooled power stack....

  14. Experiences with Formal Engineering: Model-Based Specification, Implementation and Testing of a Software Bus at Neopost

    NARCIS (Netherlands)

    Sijtema, Marten; Stoelinga, Mariëlle Ida Antoinette; Belinfante, Axel; Marinelli, Lawrence; Salaün, Gwen; Schätz, Bernhard

    We report on the actual industrial use of formal methods during the development of a software bus. At Neopost Inc., we developed the server component of a software bus, called the XBus, using formal methods during the design, validation and testing phase: We modeled our design of the XBus in the

  15. Evaluating a GPS-Based Transportation Device to Support Independent Bus Travel by People with Intellectual Disability

    Science.gov (United States)

    Davies, Daniel K.; Stock, Steven E.; Holloway, Shane; Wehmeyer, Michael L.

    2010-01-01

    We examined the utility of a PDA-based software system with integrated GPS technology for providing location-aware visual and auditory prompts to enable people with intellectual disability to successfully navigate a downtown bus route. Participants using the system were significantly more successful at completing a bus route than were people in a…

  16. Experiences with formal engineering: model-based specification, implementation and testing of a software bus at Neopost

    NARCIS (Netherlands)

    Sijtema, M.; Salaün, G.; Schätz, B.; Belinfante, Axel; Stoelinga, Mariëlle Ida Antoinette; Marinelli, L.

    2014-01-01

    We report on the actual industrial use of formal methods during the development of a software bus. During an internship at Neopost Inc., of 14 weeks, we developed the server component of a software bus, called the XBus, using formal methods during the design, validation and testing phase: we modeled

  17. Impedance of bus bars: influence of the design characteristics and results of measurements; Impedancia de barramentos blindados: influencia das caracteristicas construtivas e resultados praticos de medicoes

    Energy Technology Data Exchange (ETDEWEB)

    Bomeisel, Eduardo [Institute of Electrical and Electronics Engineers (IEEE), Orlando, FL (United States); D' Avila, Ricardo Santos [Universidade de Sao Paulo (LAC/IEE/USP), SP (Brazil). Inst. de Eletrotecnica e Energia. Lab. de Altas Correntes

    2008-12-15

    This article focuses on bus bars, used in industrial and building installations, and is based on bus bars for the following application: power distribution, sheltered environments, low voltage (<1000 V) phase 60Hz.

  18. Factors Contributing to Crashes among Young Drivers

    Directory of Open Access Journals (Sweden)

    Lyndel J. Bates

    2014-08-01

    Full Text Available Young drivers are the group of drivers most likely to crash. There are a number of factors that contribute to the high crash risk experienced by these drivers. While some of these factors are intrinsic to the young driver, such as their age, gender or driving skill, others relate to social factors and when and how often they drive. This article reviews the factors that affect the risk of young drivers crashing to enable a fuller understanding of why this risk is so high in order to assist in developing effective countermeasures.

  19. Age affects drivers' response times.

    Science.gov (United States)

    Bilban, Marjan; Vojvoda, Alenka; Jerman, Janez

    2009-06-01

    In Slovenia the number of drivers over 65 is increasing every year. With age comes a decrease in psychophysical abilities, which include sensory and motoric functions and the ability of processing visual information. These changes increase the response time and decrease the driving capacity. The aim of this study was to establish a correlation between age and response time and to determine the difference in response times between men and women. In the research participated 573 randomly chosen drivers aged 19-80 with a valid driving license. We measured their response times, when stimulated by a red traffic light, on a simulator The results clearly demonstrate that a correlation between age and the response time exists. The results show that a significant increase in response times occurs after the age of 65. In all age groups, except the oldest, women achieved longer response times than men.

  20. Work engagement: drivers and effects

    OpenAIRE

    Bakhuys Roozeboom, M.M.C.; Schelvis, R.

    2014-01-01

    The concept of work engagement fits into the tradition of positive psychology, a recent paradigm shift in psychology which focuses on mental health rather than mental illness. This article gives an introduction to the concept of work engagement. Different definitions and viewpoints of the work engagement concept are discussed. This article will discuss the drivers of work engagement, as well as the associated effects that work engagement has on the health and wellbeing of workers and organisa...

  1. Analysis, operation and maintenance of a fuel cell/battery series-hybrid bus for urban transit applications

    Science.gov (United States)

    Bubna, Piyush; Brunner, Doug; Gangloff, John J.; Advani, Suresh G.; Prasad, Ajay K.

    The fuel cell hybrid bus (FCHB) program was initiated at the University of Delaware in 2005 to demonstrate the viability of fuel cell vehicles for transit applications and to conduct research and development to facilitate the path towards their eventual commercialization. Unlike other fuel cell bus programs, the University of Delaware's FCHB design features a battery-heavy hybrid which offers multiple advantages in terms of cost, performance and durability. The current fuel cell hybrid bus is driven on a regular transit route at the University of Delaware. The paper describes the baseline specifications of the bus with a focus on the fuel cell and the balance of plant. The fuel cell/battery series-hybrid design is well suited for urban transit routes and provides key operational advantages such as hydrogen fuel economy, efficient use of the fuel cell for battery recharging, and regenerative braking. The bus is equipped with a variety of sensors including a custom-designed cell voltage monitoring system which provide a good understanding of bus performance under normal operation. Real-time data collection and analysis have yielded key insights for fuel cell bus design optimization. Results presented here illustrate the complex flow of energy within the various subsystems of the fuel cell hybrid bus. A description of maintenance events has been included to highlight the issues that arise during general operation. The paper also describes several modifications that will facilitate design improvements in future versions of the bus. Overall, the fuel cell hybrid bus demonstrates the viability of fuel cells for urban transit applications in real world conditions.

  2. Driver competence performance indicators using OTMR

    Energy Technology Data Exchange (ETDEWEB)

    Hassan EL Rashidy, R.A.

    2016-07-01

    The current practice for assessing driver competence performance is in-cab riding by driver managers. However, this paper investigates whether real-world driving data extracted from on-train monitoring recorders data (OTMR) can be used to assess the driver performance. A number of indicators were used to evaluate the drivers’ performance. These include: their use of the emergency bypass switch, the driver's reminder appliance as well as the driver’s reaction time. A study case illustrated the applicability of OTMR data to estimate the proposed indicators, which suggests that the indicators can be useful in the driver management system in addition to the current indicators. Furthermore, the proposed indicators could be used to tailor the driver training schemes up to their individual needs and evaluate their effectiveness. They could even be used for improving driver competence performance and reducing crash involvement by revealing potentially detrimental driving performance. (Author)

  3. Driving fatigue in professional drivers: a survey of truck and taxi drivers.

    Science.gov (United States)

    Meng, Fanxing; Li, Shuling; Cao, Lingzhi; Li, Musen; Peng, Qijia; Wang, Chunhui; Zhang, Wei

    2015-01-01

    Fatigue among truck drivers has been studied extensively; however, less is known regarding the fatigue experience of taxi drivers in heavily populated metropolitan areas. This study aimed to compare the differences and similarities between truck and taxi driver fatigue to provide implications for the fatigue management and education of professional drivers. A sample of 274 truck drivers and 286 taxi drivers in Beijing was surveyed via a questionnaire, which included items regarding work characteristics, fatigue experience, accident information, attitude toward fatigue, and methods of counteracting fatigue. Driver fatigue was prevalent among professional drivers, and it was even more serious for taxi drivers. Taxi drivers reported more frequent fatigue experiences and were involved in more accidents. Among the contributing factors to fatigue, prolonged driving time was the most important factor identified by both driver groups. Importantly, the reason for the engagement in prolonged driving was neither due to the lack of awareness concerning the serious outcome of fatigue driving nor because of their poor detection of fatigue. The most probable reason was the optimism bias, as a result of which these professional drivers thought that fatigue was more serious for other drivers than for themselves, and they thought that they were effective in counteracting the effect of fatigue on their driving performance. Moreover, truck drivers tended to employ methods that require stopping to counteract fatigue, whereas taxi drivers preferred methods that were simultaneous with driving. Although both driver groups considered taking a nap as one of the most effective means to address fatigue, this method was not commonly used. Interestingly, these drivers were aware that the methods they frequently used were not the most effective means to counteract fatigue. This study provides knowledge on truck and taxi drivers' characteristics in fatigue experience, fatigue attitude, and

  4. Experimental Research in Boost Driver with EDLCs

    Science.gov (United States)

    Matsumoto, Hirokazu

    The supply used in servo systems tends to have a high voltage in order to reduce loss and improve the response of motor drives. We propose a new boost motor driver that comprises EDLCs. The proposed driver has a simple structure, wherein the EDLCs are connected in series to the supply, and comprises a charge circuit to charge the EDLCs. The proposed driver has three advantages over conventional boost drivers. The first advantage is that the driver can easily attain the stable boost voltage. The second advantage is that the driver can reduce input power peaks. In a servo system, the input power peaks become greater than the rated power in order to accelerate the motor rapidly. This implies that the equipments that supply power to servo systems must have sufficient power capacity to satisfy the power peaks. The proposed driver can suppress the increase of the power capacity of supply facilities. The third advantage is that the driver can store almost all of the regenerative energy. Conventional drivers have a braking resistor to suppress the increase in the DC link voltage. This causes a considerable reduction in the efficiency. The proposed driver is more efficient than conventional drivers. In this study, the experimental results confirmed the effectiveness of the proposed driver and showed that the drive performance of the proposed driver is the same as that of a conventional driver. Furthermore, it was confirmed that the results of the simulation of a model of the EDLC module, whose capacitance is dependent on the frequency, correspond well with the experimental results.

  5. Electric bus fleet size and mix problem with optimization of charging infrastructure

    DEFF Research Database (Denmark)

    Rogge, Matthias; van der Hurk, Evelien; Larsen, Allan

    2018-01-01

    addresses these constraints and provides a methodology for the cost-optimized planning of depot charging battery bus fleets and their corresponding charging infrastructure. The defined problem covers the scheduling of battery buses, the fleet composition, and the optimization of charging infrastructure...

  6. Topology identification for multiple-bus DC MicroGrids via primary control perturbations

    DEFF Research Database (Denmark)

    Angjelichinoski, Marko; Stefanovic, Cedomir; Popovski, Petar

    2017-01-01

    We propose a Least Squares Estimation procedure for estimating the admittance matrix of multi-bus DC MicroGrids (MGs). In the proposed solution, the generators simultaneously inject training signals in the form of small deterministic perturbations of the primary droop control parameters and measure...

  7. Connecticut Transit (CTTRANSIT) Fuel Cell Transit Bus: Second Evaluation Report and Appendices

    Energy Technology Data Exchange (ETDEWEB)

    Chandler, K.; Eudy, L.

    2009-05-01

    This report describes operations at Connecticut Transit (CTTRANSIT) in Hartford for one prototype fuel cell bus and three new diesel buses operating from the same location. The evaluation period in this report (January 2008 through February 2009) has been chosen to coincide with a UTC Power propulsion system changeout that occurred on January 15, 2008.

  8. 75 FR 20034 - Over-the-Road Bus Accessibility Program Grants: Corrections

    Science.gov (United States)

    2010-04-16

    ... Office (Appendix A) or Blenda Younger, Office of Program Management, (202) 366-2053. Corrections On page... the Special Warranty for the Over-the-Road Bus Accessibility Program that is most current as of the... thereto. Any U.S. DOL Special Warranty that may be provided and any documents cited therein are...

  9. Re?bus disainivõistlus ehk noored innovaatorid bussirevolutsiooni otsinguil

    Index Scriptorium Estoniae

    2005-01-01

    2005. a. algul agentuuri APCI (Agence pour la Promotion de la Creation Industrielle) poolt korraldatud disainivõistlusest Re?bus. Eestist valiti 30 finalisti hulka büroo ZiZi & YoYo töö. Edukamad võistlustööd olid juuni algul väljas rahvusvahelise ühistranspordi assotsiatsiooni (UITP) 56. kongressil Roomas

  10. An Optimal Control Strategy for DC Bus Voltage Regulation in Photovoltaic System with Battery Energy Storage

    Science.gov (United States)

    Daud, Muhamad Zalani; Mohamed, Azah; Hannan, M. A.

    2014-01-01

    This paper presents an evaluation of an optimal DC bus voltage regulation strategy for grid-connected photovoltaic (PV) system with battery energy storage (BES). The BES is connected to the PV system DC bus using a DC/DC buck-boost converter. The converter facilitates the BES power charge/discharge to compensate for the DC bus voltage deviation during severe disturbance conditions. In this way, the regulation of DC bus voltage of the PV/BES system can be enhanced as compared to the conventional regulation that is solely based on the voltage-sourced converter (VSC). For the grid side VSC (G-VSC), two control methods, namely, the voltage-mode and current-mode controls, are applied. For control parameter optimization, the simplex optimization technique is applied for the G-VSC voltage- and current-mode controls, including the BES DC/DC buck-boost converter controllers. A new set of optimized parameters are obtained for each of the power converters for comparison purposes. The PSCAD/EMTDC-based simulation case studies are presented to evaluate the performance of the proposed optimized control scheme in comparison to the conventional methods. PMID:24883374

  11. Study on the calculation models of bus delay at bays using queueing theory and Markov chain.

    Science.gov (United States)

    Sun, Feng; Sun, Li; Sun, Shao-Wei; Wang, Dian-Hai

    2015-01-01

    Traffic congestion at bus bays has decreased the service efficiency of public transit seriously in China, so it is crucial to systematically study its theory and methods. However, the existing studies lack theoretical model on computing efficiency. Therefore, the calculation models of bus delay at bays are studied. Firstly, the process that buses are delayed at bays is analyzed, and it was found that the delay can be divided into entering delay and exiting delay. Secondly, the queueing models of bus bays are formed, and the equilibrium distribution functions are proposed by applying the embedded Markov chain to the traditional model of queuing theory in the steady state; then the calculation models of entering delay are derived at bays. Thirdly, the exiting delay is studied by using the queueing theory and the gap acceptance theory. Finally, the proposed models are validated using field-measured data, and then the influencing factors are discussed. With these models the delay is easily assessed knowing the characteristics of the dwell time distribution and traffic volume at the curb lane in different locations and different periods. It can provide basis for the efficiency evaluation of bus bays.

  12. The use of a CAN-bus in a flexible manufacturing cell

    NARCIS (Netherlands)

    Ing P.N. Klijn; Ir. Dick van Schenk Brill

    2000-01-01

    One of the goals of this research is to arrive at an implementation of a CAN-bus that can be used for lab exercises in regular student courses. In this paper, an overview is given of our basic ideas concerning the CAN concept and its application to the control of a manufacturing system. This system

  13. Study on the Calculation Models of Bus Delay at Bays Using Queueing Theory and Markov Chain

    Directory of Open Access Journals (Sweden)

    Feng Sun

    2015-01-01

    Full Text Available Traffic congestion at bus bays has decreased the service efficiency of public transit seriously in China, so it is crucial to systematically study its theory and methods. However, the existing studies lack theoretical model on computing efficiency. Therefore, the calculation models of bus delay at bays are studied. Firstly, the process that buses are delayed at bays is analyzed, and it was found that the delay can be divided into entering delay and exiting delay. Secondly, the queueing models of bus bays are formed, and the equilibrium distribution functions are proposed by applying the embedded Markov chain to the traditional model of queuing theory in the steady state; then the calculation models of entering delay are derived at bays. Thirdly, the exiting delay is studied by using the queueing theory and the gap acceptance theory. Finally, the proposed models are validated using field-measured data, and then the influencing factors are discussed. With these models the delay is easily assessed knowing the characteristics of the dwell time distribution and traffic volume at the curb lane in different locations and different periods. It can provide basis for the efficiency evaluation of bus bays.

  14. Designing Universitas Indonesia Molina EV Bus Dashboard Using ECQFD and TRIZ

    Science.gov (United States)

    Faiq Pradhila, Muhammad; Suzianti, Amalia; Putri Adinda, Prilly

    2018-01-01

    Universitas Indonesia is involved in the national electric car development program. One of the focus by the research team is to develop the Molina EV Bus which is planned to replace the current operational bus at UI so that it can be more environmental friendly. With UI developing facilities for the disabled, the Molina research team planned to make a new prototype of the Molina EV Bus to contribute to the facilities developed for the disabled. The new prototype is expected to increase the quality of the previous features of the EV Bus, including the dashboard that had been ignored. To support the development of the new prototype, this research was conducted to design a suitable dashboard for the new prototype. Design of the prototype are made using Autodesk Inventor. This research used the integration of ECQFD (Environmentally Conscious Quality Function Deployment) and TRIZ (Theory of Inventive Problem Solving) method. ECQFD was used to translate user needs into quality characteristics based on environmental aspects. TRIZ was used to translate the quality characteristics into technical specifications. This research has generated 3 sustainable, innovative, and user-preferred dashboard design recommendation for the new prototype.

  15. Josephson Junction Qubits with Symmetrized Couplings to a Resonant LC Bus

    National Research Council Canada - National Science Library

    Yukon, Stanford P

    2005-01-01

    The system for quantum computation(QC) we are proposing is modeled on the ion trap system for QC1 where ion qubits are coupled among themselves through collective oscillations in the ion trap, which plays the role of a resonant bus...

  16. Uncertainty in Bus Arrival Time Predictions: Treating Heteroscedasticity With a Metamodel Approach

    DEFF Research Database (Denmark)

    O'Sullivan, Aidan; Pereira, Francisco Camara; Zhao, Jinhua

    2016-01-01

    on the predicted arrival time to be estimated, which give a measure of the uncertainty associated with the individual predictions. This represents to the best of our knowledge the first application of methods to handle the uncertainty in bus arrival times that explicitly takes into account the inherent...

  17. 76 FR 17738 - Over-the-Road Bus Accessibility Program Announcement of Project Selections

    Science.gov (United States)

    2011-03-30

    ... help finance the incremental capital and training costs of complying with DOT's over-the-road bus...--New York, One Administrator, Region 7-- Bowling Green, Room 429, New York, NY Kansas City, MO, 901... Metropolitan Office, Region 2-- New York, One Bowling Green, Room 428, New York, NY 10004-1415, Tel. 212-668...

  18. Impacts of bus rapid transit (BRT) on surrounding residential property values : final report.

    Science.gov (United States)

    2017-07-01

    As bus rapid transit (BRT) grows in popularity in the United States, a better understanding of the modes impacts on land uses and property values is needed. Economic theory suggests, and literature has shown, that people are willing to pay higher ...

  19. 76 FR 13580 - Bus Testing; Calculation of Average Passenger Weight and Test Vehicle Weight

    Science.gov (United States)

    2011-03-14

    ..., developing preventive maintenance schedules, and budgeting for unscheduled maintenance. In addition... components, ensuring the availability of such vehicles for passenger service. This NPRM is based on modern... modern scientific data, and provides flexibility and freedom of choice for the affected entities. The bus...

  20. Evaluating Operational Effects of Bus Lane with Intermittent Priority under Connected Vehicle Environments

    Directory of Open Access Journals (Sweden)

    Dingxin Wu

    2017-01-01

    Full Text Available Bus lane with intermittent priority (BLIP is an innovative method to improve the reliability of bus services while promoting efficient usage of road resources. Vehicle-to-vehicle (V2V communication is an advanced technology that can greatly enhance the vehicle mobility, improve traffic safety, and alleviate traffic jams. To explore the benefits of BLIP operation under a connected environment, this study proposed a three-lane cellular automata (CA model under opening boundary condition. In particular, a mandatory BLIP lane-changing rule is developed to analyze special asymmetric lane-changing behaviors. To improve the simulation accuracy, a smaller cell size is used in the CA model. Through massive numerical simulations, the benefits and influences of BLIP are explored in this paper. They include impacts on neighborhood lanes such as traffic density increasing and average speed decreasing, lane-changing behaviors, lane usage, and the impacts of bus departure interval and clear distance on the road capacity of BLIP. Analysis of traffic flow characteristics of BLIP reveals that there is a strong relationship among bus departure interval, clear distance, and road capacity. Furthermore, setting conditions for deployment of BLIP under the V2V environment such as reasonable departure interval, clear distance, and traffic density are obtained.

  1. Characteristic of Modal Choice Preference between Bus and Train from Medan to Kuala Namu Airport

    Science.gov (United States)

    Surbakti, M.; Bombongan, C.

    2017-03-01

    Kuala Namu International Airport started operating on July 25, 2013 to replace Polonia International Airport followed by the operation of airport train and bus as a public transport service mode. The purpose of the study was to define the characteristic of airport train and bus users how they choose both of the transportation modes and to test the sensitivity, if one of the transportation attribute are changes. The data obtained through stated preference method was modelled by using binary logit and probit models. From these two models, the probability of using airport train and bus transportation can be known. The result of analysis showed the equations of the function of utility difference of airport train and bus: UKAB-BB = 2,606 - 0,028X1 - 0,007X2 - 0,014X3 - 0,016X4 + 0,044X5, where X1, (cost attribute), X2 (time attribute), X3 (headway attribute), X4 (access attribute) and X5 (service attribute)..

  2. 49 CFR Appendix A to Part 665 - Tests To Be Performed at the Bus Testing Facility

    Science.gov (United States)

    2010-10-01

    ... should be reported in the reliability test. 6. Fuel Economy The fuel economy test should be conducted using duty cycles that simulate transit service. This test should measure the fuel economy of the bus in miles per gallon or other energy-equivalent units. The fuel economy test should be designed only to...

  3. High voltage bus and auxiliary heater control system for an electric or hybrid vehicle

    Science.gov (United States)

    Murty, Balarama Vempaty

    2000-01-01

    A control system for an electric or hybrid electric vehicle includes a vehicle system controller and a control circuit having an electric immersion heater. The heater is electrically connected to the vehicle's high voltage bus and is thermally coupled to a coolant loop containing a heater core for the vehicle's climate control system. The system controller responds to cabin heat requests from the climate control system by generating a pulse width modulated signal that is used by the control circuit to operate the heater at a duty cycle appropriate for the amount of cabin heating requested. The control system also uses the heater to dissipate excess energy produced by an auxiliary power unit and to provide electric braking when regenerative braking is not desirable and manual braking is not necessary. The control system further utilizes the heater to provide a safe discharge of a bank of energy storage capacitors following disconnection of the battery or one of the high voltage connectors used to transmit high voltage operating power to the various vehicle systems. The control circuit includes a high voltage clamping circuit that monitors the voltage on the bus and operates the heater to clamp down the bus voltage when it exceeds a pre-selected maximum voltage. The control system can also be used to phase in operation of the heater when the bus voltage exceeds a lower threshold voltage and can be used to phase out the auxiliary power unit charging and regenerative braking when the battery becomes fully charged.

  4. Orbital disc insulator for SF.sub.6 gas-insulated bus

    Science.gov (United States)

    Bacvarov, Dosio C.; Gomarac, Nicholas G.

    1977-01-01

    An insulator for supporting a high voltage conductor within a gas-filled grounded housing consists of radially spaced insulation rings fitted to the exterior of the bus and the interior of the grounded housing respectively, and the spaced rings are connected by trefoil type rings which are integrally formed with the spaced insulation rings.

  5. Simulating Study on Drive System Performance for Hybrid Electric Bus Based on ADVISOR

    Directory of Open Access Journals (Sweden)

    Wang Xingxing

    2017-01-01

    Full Text Available Hybrid electric bus has a number of advantages when compared with ordinary passenger cars, but in the dynamic matching and the vehicle performance are difficult to detect, thus limits its development process. In this paper, combined with the actual models, the hybrid electric bus module parameters were modified in the software of ADVISOR (Advanced Vehicle Simulator, main including: module of the vehicle, the wheel module, motor module, a battery module and engine module, three kinds of bus models for A, B and C were established, and the related performance that need to be analyzed was set up, such as acceleration, gradability, emissions and energy utilization and so on, in order to ensure the vehicle running in the same environment and convenient for comparison, a fixed vehicle driving cycles was chose, then the simulation results was analyzed, and the various performance was compared with the dynamic indicators and economic indicators which determined by referencing of traditional city bus standard and each other, and finally, the performance optimal model of B was chose out which can meet the demand, its related performance parameters of the simulation results are as follows: the best gradability is 26%, maximum speed is 72.7km/h, maximum acceleration is 1.7m/s2, 0~50km/h acceleration time is 9.5s and fuel consumption is 25L/km.

  6. Mobile Encounters: Bus 5A as a cross-cultural meeting place

    DEFF Research Database (Denmark)

    Koefoed, Lasse Martin; Simonsen, Kirsten; Christensen, Mathilde Dissing

    2016-01-01

    The paper explores modes of encounters in the everyday practice of bus travel. Particularly, it addresses cross-cultural encounters located in the tension between familiarity and difference, between inclusion and exclusion. The paper is located in contemporary thoughts, approaching public transport...

  7. 77 FR 25529 - Over-the-Road Bus Accessibility Program Grants

    Science.gov (United States)

    2012-04-30

    ... Transit Administration (FTA), DOT. ACTION: Notice of Availability of Fiscal Year 2012 Funds: Solicitation... availability of funds in Fiscal Year (FY) 2012 for the Over-the-Road Bus Accessibility (OTRB) Program... OTRB program makes funds available to private operators of over-the-road buses to finance the...

  8. 75 FR 2583 - Over-the-Road Bus Accessibility Program Grants

    Science.gov (United States)

    2010-01-15

    ... Administration (FTA), DOT. ACTION: Notice of Availability of Fiscal Year 2009 Funds: Solicitation of Grant...) announces the availability of funds in Fiscal Year (FY) 2009 for the Over-the-Road Bus (OTRB) Accessibility... OTRB Accessibility Program makes funds available to private operators of over-the-road buses to finance...

  9. An optimal control strategy for DC bus voltage regulation in photovoltaic system with battery energy storage.

    Science.gov (United States)

    Daud, Muhamad Zalani; Mohamed, Azah; Hannan, M A

    2014-01-01

    This paper presents an evaluation of an optimal DC bus voltage regulation strategy for grid-connected photovoltaic (PV) system with battery energy storage (BES). The BES is connected to the PV system DC bus using a DC/DC buck-boost converter. The converter facilitates the BES power charge/discharge to compensate for the DC bus voltage deviation during severe disturbance conditions. In this way, the regulation of DC bus voltage of the PV/BES system can be enhanced as compared to the conventional regulation that is solely based on the voltage-sourced converter (VSC). For the grid side VSC (G-VSC), two control methods, namely, the voltage-mode and current-mode controls, are applied. For control parameter optimization, the simplex optimization technique is applied for the G-VSC voltage- and current-mode controls, including the BES DC/DC buck-boost converter controllers. A new set of optimized parameters are obtained for each of the power converters for comparison purposes. The PSCAD/EMTDC-based simulation case studies are presented to evaluate the performance of the proposed optimized control scheme in comparison to the conventional methods.

  10. An Optimal Control Strategy for DC Bus Voltage Regulation in Photovoltaic System with Battery Energy Storage

    Directory of Open Access Journals (Sweden)

    Muhamad Zalani Daud

    2014-01-01

    Full Text Available This paper presents an evaluation of an optimal DC bus voltage regulation strategy for grid-connected photovoltaic (PV system with battery energy storage (BES. The BES is connected to the PV system DC bus using a DC/DC buck-boost converter. The converter facilitates the BES power charge/discharge to compensate for the DC bus voltage deviation during severe disturbance conditions. In this way, the regulation of DC bus voltage of the PV/BES system can be enhanced as compared to the conventional regulation that is solely based on the voltage-sourced converter (VSC. For the grid side VSC (G-VSC, two control methods, namely, the voltage-mode and current-mode controls, are applied. For control parameter optimization, the simplex optimization technique is applied for the G-VSC voltage- and current-mode controls, including the BES DC/DC buck-boost converter controllers. A new set of optimized parameters are obtained for each of the power converters for comparison purposes. The PSCAD/EMTDC-based simulation case studies are presented to evaluate the performance of the proposed optimized control scheme in comparison to the conventional methods.

  11. A summary of design, policies and operational characteristics for shared bicycle/bus lanes.

    Science.gov (United States)

    2012-07-01

    This report contains the results of an investigation of the design and operation of shared bicycle/bus lanes in municipalities in the United States and other countries. These lanes are designated for use by public transit buses, bicycles, and usually...

  12. Measurements on and simulations of a biogas-fuelled bus; Maetningar paa och simulering av biogasbuss

    Energy Technology Data Exchange (ETDEWEB)

    Olsson, L.O.; Nilsson, Johan

    1995-03-01

    Mathematical models for torque/fuel consumption and emissions have been studied for a biogas-fuelled bus used in urban traffic in Linkoeping, Sweden. It is noted that the cycle ECE R-49 is not representative for city buses, but that the Braunschweig cycle gives rather good agreement. 2 refs, 37 figs

  13. Modeling commuter preferences for the proposed bus rapid transit in Dar-es-Salaam

    NARCIS (Netherlands)

    Nkurunziza, A.; Zuidgeest, M.H.P.; Brussel, M.J.G.; van Maarseveen, M.F.A.M.

    2012-01-01

    The paper analyzes individual commuter preferences towards the proposed bus rapid transit (BRT) system in Dar-es-Salaam, Tanzania. The objective of the survey was to identify how commuters perceive and value the proposed BRT service quality attributes. A stated preference survey of potential users

  14. General purpose interface bus for personal computers used in wind tunnel data acquisition

    Science.gov (United States)

    Puram, Chith K.

    1993-01-01

    The use of the general purpose interface bus IEEE-488 to met the special requirements of wind tunnel testing involving PCs is discussed. The gearing of instrumentation to minimize test time, the choice of software to meet computer memory constraints, the use of graphics for improved use of tunnel run time, and the choice of data acquisition equipment to remove bottlenecks are addressed.

  15. Bus Lane Within The Area Of Intersection” Method For Buses Priority On The Intersections

    Directory of Open Access Journals (Sweden)

    Vikovych Ihor

    2015-12-01

    Full Text Available The primary objective of this article is to formalize the “special bus lanes within the area of intersection” method that allows providing buses with space-time priority at signalized intersections (mostly of the isolated type, including those with no more than two traffic lanes in each direction at the approaches to the intersection. The article establishes the limits for efficient application of this method, and describes the results of a simulation experiment conducted in the VISSIM environment to investigate the functioning of the method on an actual intersection. The most critical phase of implementation of this method is to determine the optimum length of the special bus lane at the approach to the intersection. The optimum length of special bus lanes at the approaches to isolated or coordinated intersections is determined based on the maximum length of queued vehicles which is computed using the simulation models developed in the Objective-C language. The article covers the basic characteristics of those models, their structure and building principles, and also provides the model validation results. Simulation models can be used both for determination of the optimum length of special bus lanes at the approaches to signalized intersections and for analysis of intersection performance based on the maximum length of queued vehicles.

  16. Deadhead Trip Minimization in City Bus Transportation: A Real Life Application

    Directory of Open Access Journals (Sweden)

    Efendi Nasibov

    2013-04-01

    Full Text Available The quality of public transportation services is one of the most important performance indicators of modern urban policies for both planning and implementation aspects. Therefore, along with the size of the city, the significance of appropriate cost evaluation and optimization of all related transportation activities increases as well. One of the most important cost factors for the public transport agencies is naturally the fuel consumption of the vehicles. In this study, the attention is focused on the metropolitan bus transport service. The specific aim is to minimize a significant portion of total fuel utilization that occurs due to the so called deadhead trip or dead mileage, which is defined as the idle distance covered by the vehicle between the garage and the route terminal stops without carrying any passengers. In this study, the results of four mathematical models for minimizing the total deadhead trip distance covered in city bus services of Izmir are presented. The models vary due to the inclusion of garage capacity restrictions or operator distinction for supporting both operational and strategical decisions. All models are applied to the recent bus schedule data, which consist of 293 routes, 1,424 buses and 10 garages, for obtaining the optimal route bus-garage allocations and garage capacities. The results of the Decentralized-Capacitated model, which is appropriate for quick implementation, promise a 7.8% reduction in total dead mileage. While on the other hand, if all garage capacities can be expanded and the bus service is maintained only by one operator as modelled in the Centralized-Uncapacitated case, even a 31.4% improvement is possible in the long term. The environmental gains as well as the financial benefits to be achieved when the solutions are actually implemented, justify the practical contribution of the study.

  17. Health impacts of free bus travel for young people: evaluation of a natural experiment in London.

    Science.gov (United States)

    Edwards, Phil; Steinbach, Rebecca; Green, Judith; Petticrew, Mark; Goodman, Anna; Jones, Alasdair; Roberts, Helen; Kelly, Charlotte; Nellthorp, John; Wilkinson, Paul

    2013-08-01

    We used the introduction of free bus travel for young people in London in 2005 as a natural experiment with which to assess its effects on active travel, car use, road traffic injuries, assaults, and on one measure of social inclusion, total number of trips made. A controlled before-after analysis was conducted. We estimated trips by mode and distances travelled in the preintroduction and postintroduction periods using data from London Travel Demand Surveys. We estimated rates of road traffic injury and assault in each period using STATS19 data and Hospital Episode Statistics, respectively. We estimated the ratio of change in the target age group (12-17 years) to the change in adults (ages 25-59 years), with 95% CIs. The proportion of short trips travelled by bus by young people increased postintroduction. There was no evidence for an increase in the total number of bus trips or distance travelled by bus by young people attributable to the intervention. The proportion of short trips by walking decreased, but there was no evidence for any change to total distance walked. Car trips declined in both age groups, although distance travelled by car decreased more in young people. Road casualty rates declined, but the pre-post ratio of change was greater in young people than adults (ratio of ratios 0.84; 95% CI 0.82 to 0.87). Assaults increased and the ratio of change was greater in young people (1.20; 1.13 to 1.27). The frequency of all trips by young people was unchanged, both in absolute terms and relative to adults. The introduction of free bus travel for young people had little impact on active travel overall and shifted some travel from car to buses that could help broader environmental objectives.

  18. Design and Control of a Buck–Boost Charger-Discharger for DC-Bus Regulation in Microgrids

    Directory of Open Access Journals (Sweden)

    Carlos Andrés Ramos-Paja

    2017-11-01

    Full Text Available In DC and hybrid microgrids (MG, the DC-bus regulation using Energy Storage Devices (ESD is important for the stable operation of both the generators and loads. There are multiple commercial voltage levels for both ESD and DC-bus; therefore, the ESD voltage may be higher, equal or lower than the DC-bus voltage depending on the application. Moreover, most of the ESD converter controllers are linear-based, hence they ensure stability in a limited operation range. This paper proposes a system to regulate the DC-bus voltage of an MG accounting for any voltage relation between the ESD and the DC-bus voltage. The proposed system is formed by an ESD connected to a DC-bus through a bidirectional Buck–Boost converter, which is regulated by a Sliding-Mode Controller (SMC to ensure the system stability in the entire operation range. The SMC drives the Buck–Boost charger–discharger to regulate the DC-bus voltage, at the desired reference value, by charging or discharging the ESD. This paper also provides detailed procedures to design the parameters of both the SMC and the charger–dischager. Finally, simulation and experimental results validate the proposed solution and illustrate its performance.

  19. Theoretical analysis of the cumulative costs of different diesel bus alternatives for a public transport in the city of Belgrade

    Directory of Open Access Journals (Sweden)

    Jovanović Stevan S.

    2017-01-01

    Full Text Available This paper includes comparative analysis of the environmental, energetic, and financial costs of different bus propulsion, possibly applied on the public transport in the city of Belgrade. It considers the modern diesel bus, the trolleybus, the natural gas bus with the spark ignition engine, the electric bus using LiFePO4 battery, and the electric bus with ultra-capacitor. The results are presented according to the real data and the real electro-energetic situation in Serbia, with the dominantly used lignite coal as primary fuel. This model gives the exact exhaust emission of electric vehicles at the thermal power plant, enables its comparison to the internal combustion engine vehicles. The result in analysis shows that the natural gas bus is the most cost efficient in economical way with overall exploitation price of $87 per 100 km. The trolleybus is more economical then the natural gas powered bus only at high departures rate, higher than 230 per workday.

  20. Analysis of On-Board Photovoltaics for a Battery Electric Bus and Their Impact on Battery Lifespan

    Directory of Open Access Journals (Sweden)

    Kevin R. Mallon

    2017-07-01

    Full Text Available Heavy-duty electric powertrains provide a potential solution to the high emissions and low fuel economy of trucks, buses, and other heavy-duty vehicles. However, the cost, weight, and lifespan of electric vehicle batteries limit the implementation of such vehicles. This paper proposes supplementing the battery with on-board photovoltaic modules. In this paper, a bus model is created to analyze the impact of on-board photovoltaics on electric bus range and battery lifespan. Photovoltaic systems that cover the bus roof and bus sides are considered. The bus model is simulated on a suburban bus drive cycle on a bus route in Davis, CA, USA for a representative sample of yearly weather conditions. Roof-mounted panels increased vehicle driving range by 4.7% on average annually, while roof and side modules together increased driving range by 8.9%. However, variations in weather conditions meant that this additional range was not reliably available. For constant vehicle range, rooftop photovoltaic modules extended battery cycle life by up to 10% while modules on both the roof and sides extended battery cycle life by up to 19%. Although side-mounted photovoltaics increased cycle life and range, they were less weight- and cost-effective compared to the roof-mounted panels.