WorldWideScience

Sample records for bus bays

  1. A new bus lane on urban expressway with no-bay bus stop

    Science.gov (United States)

    Tian, Zhao; Jia, Limin

    2016-01-01

    The sharp increase in residents and vehicles causes heavy traffic pressure in many cities. To ease traffic congestion, it has been the common sense that we should develop public transit system. The priority of the bus appears particularly necessary with the rapid development of the public transport system. The bus lane is an important embodiment of the bus priority. Focusing on the problem of the unreasonable dedicated bus lane (DBL) under the lower ratio of buses, this paper proposed a new bus lane with limited physical length. And this bus lane can reduce the lane-changing conflict caused by the buses and cars running on roads without bus lanes. Based on the cellular automata (CA) traffic flow model and the lane-changing behavior of the vehicle including the optional lane-changing and the mandatory lane-changing, a three-lane traffic model with an isolated no-bay bus stop is proposed. The ordinary three-lane traffic without a bus lane and the cases of traffic with a DBL or the proposed bus lane are simulated, and the comparisons in the form of the fundamental diagrams are made among them. It is shown that the no-bay bus stop can act as a bottleneck on the traffic flow because of the mandatory lane-changing behavior. Under a certain ratio of the bus number to the total vehicles number, (1) the traffic with the proposed bus lane has less lane-changing conflict and can provide higher traffic capacity than the ordinary traffic without a bus lane, (2) compared with the DBL, the proposed bus lane is advantageous in easing congestion on the ordinary lanes when the traffic flow is high and can avoid unreasonable allocation of the road resources.

  2. BUS BAY PERFORMANCE AND ITS INFLUENCE ON THE CAPACITY OF ROAD NETWORK IN DAR ES SALAAM

    Directory of Open Access Journals (Sweden)

    Nurdin K. Mushule

    2012-01-01

    Full Text Available One of major problems facing motorists in Dar es Salaam city today is congestion. Bus bays have a significant influence on the capacity of a roadway because they interfere with passing vehicles primarily when buses maneuver to pull into and out of bus bays. Bus bay stops will also interfere with vehicles movement if bus demand exceeds the bus bay capacity resulting in some buses waiting in the travel lane until the buses occupying the bay exit the bay. This paper presents the results of a study which was carried out to evaluate the bus bay performance and its influence on the capacity of the roadway network in the city of Dar es Salaam. The case study area covered 11 bus stops along Morogoro road from Ubungo to Magomeni Mapipa. Capacity of bus bays was studied using procedure outlined in the Transit Capacity and Quality of Service Manual of 2003. This enabled the researcher to determine parameters such as dwell times and clearance times which are major determinants of bus stop capacity. The results indicate that only 18% of the bus bay stops studied did not have adequate capacity to cater for the available demand. 9% did not have adequate capacity during peak hours but the capacity was adequate during off-peak hours. The remaining 73% of bus bay stops possess adequate capacity all the time. Although most bus bay stops studied possess adequate capacity, severe congestion was observed at these locations. This is due to erratic behavior of bus drivers who do not utilize the provided space for them to drop off and pick up passengers. Clearly, this is an area that requires more strict enforcement in order to ease the congestion problem in the city by operating the existing capacity more efficiently."

  3. Capacity models on expressway near a bus bay stop with an access

    Institute of Scientific and Technical Information of China (English)

    张洪宾; 孙小端; 贺玉龙; 宇仁德

    2015-01-01

    To determinate the expressway capacity near a bus bay stop with an access, capacity models on the expressway near a bus stop with an access were developed on the basis of gap acceptance theory and queuing theory. Depending on a bus stop position to an entrance or an exit ramp, the capacity models were developed for four cases. Bus bay stops with overflow and bus bay stops without overflow were considered. A comparison of simulation experiment and model calculation was carried out. Results show that the suggested models have high accuracy and reliability, at bus arrival rate below 60 vehicles per hour (veh/h) or vehicle volumes at the entrance and the exit below 200 passenger cars units per hour (pcu/h), and there are no significant difference in the capacities for four cases. When bus arrival rate is above 240 veh/h, the capacities of all four cases will decline rapidly. With berth number increasing, the increasing of the capacities is no obvious for four cases. As the bus arrival rate and vehicle volumes at the entrance and the exit increase, bus stops located downstream of an entrance and upstream of an exit have a remarkably effect on the capacities. The latter case is much heavier than the former. Those results can be used to traffic design and optimization on urban expressway near a bus stop with an access.

  4. Study on the Calculation Models of Bus Delay at Bays Using Queueing Theory and Markov Chain

    Directory of Open Access Journals (Sweden)

    Feng Sun

    2015-01-01

    Full Text Available Traffic congestion at bus bays has decreased the service efficiency of public transit seriously in China, so it is crucial to systematically study its theory and methods. However, the existing studies lack theoretical model on computing efficiency. Therefore, the calculation models of bus delay at bays are studied. Firstly, the process that buses are delayed at bays is analyzed, and it was found that the delay can be divided into entering delay and exiting delay. Secondly, the queueing models of bus bays are formed, and the equilibrium distribution functions are proposed by applying the embedded Markov chain to the traditional model of queuing theory in the steady state; then the calculation models of entering delay are derived at bays. Thirdly, the exiting delay is studied by using the queueing theory and the gap acceptance theory. Finally, the proposed models are validated using field-measured data, and then the influencing factors are discussed. With these models the delay is easily assessed knowing the characteristics of the dwell time distribution and traffic volume at the curb lane in different locations and different periods. It can provide basis for the efficiency evaluation of bus bays.

  5. Study on the Calculation Models of Bus Delay at Bays Using Queueing Theory and Markov Chain

    Science.gov (United States)

    Sun, Li; Sun, Shao-wei; Wang, Dian-hai

    2015-01-01

    Traffic congestion at bus bays has decreased the service efficiency of public transit seriously in China, so it is crucial to systematically study its theory and methods. However, the existing studies lack theoretical model on computing efficiency. Therefore, the calculation models of bus delay at bays are studied. Firstly, the process that buses are delayed at bays is analyzed, and it was found that the delay can be divided into entering delay and exiting delay. Secondly, the queueing models of bus bays are formed, and the equilibrium distribution functions are proposed by applying the embedded Markov chain to the traditional model of queuing theory in the steady state; then the calculation models of entering delay are derived at bays. Thirdly, the exiting delay is studied by using the queueing theory and the gap acceptance theory. Finally, the proposed models are validated using field-measured data, and then the influencing factors are discussed. With these models the delay is easily assessed knowing the characteristics of the dwell time distribution and traffic volume at the curb lane in different locations and different periods. It can provide basis for the efficiency evaluation of bus bays. PMID:25759720

  6. Zero Emission Bay Area (ZEBA) Fuel Cell Bus Demonstration Results. Fourth Report

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, Leslie [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Post, Matthew [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2015-07-02

    This report presents results of a demonstration of fuel cell electric buses (FCEB) operating in Oakland, California. Alameda-Contra Costa Transit District (AC Transit) leads the Zero Emission Bay Area (ZEBA) demonstration, which includes 12 advanced-design fuel cell buses and two hydrogen fueling stations. The FCEBs in service at AC Transit are 40-foot, low-floor buses built by Van Hool with a hybrid electric propulsion system that includes a US Hybrid fuel cell power system and EnerDel lithium-based energy storage system. The buses began revenue service in May 2010.

  7. Zero Emission Bay Area (ZEBA) Fuel Cell Bus Demonstration: First Results Report

    Energy Technology Data Exchange (ETDEWEB)

    Chandler, K.; Eudy, L.

    2011-08-01

    This report documents the early implementation experience for the Zero Emission Bay Area (ZEBA) Demonstration, the largest fleet of fuel cell buses in the United States. The ZEBA Demonstration group includes five participating transit agencies: AC Transit (lead transit agency), Santa Clara Valley Transportation Authority (VTA), Golden Gate Transit (GGT), San Mateo County Transit District (SamTrans), and San Francisco Municipal Railway (Muni). The ZEBA partners are collaborating with the U.S. Department of Energy (DOE) and DOE's National Renewable Energy Laboratory (NREL) to evaluate the buses in revenue service.

  8. Zero Emission Bay Area (ZEBA) Fuel Cell Bus Demonstration Results: Fifth Report

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, Leslie [National Renewable Energy Lab. (NREL), Golden, CO (United States); Post, Matthew [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jeffers, Matthew [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-06-01

    This report presents results of a demonstration of fuel cell electric buses (FCEB) operating in Oakland, California. Alameda-Contra Costa Transit District (AC Transit) leads the Zero Emission Bay Area (ZEBA) demonstration, which includes 13 advanced-design fuel cell buses and two hydrogen fueling stations. The ZEBA partners are collaborating with the U.S. Department of Energy (DOE) and DOE's National Renewable Energy Laboratory (NREL) to evaluate the buses in revenue service. NREL has published four previous reports describing operation of these buses. This report presents new and updated results covering data from January 2015 through December 2015.

  9. Zero Emission Bay Area (ZEBA) Fuel Cell Bus Demonstration: Second Results Report

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, L.; Chandler, K.

    2012-07-01

    This report presents results of a demonstration of 12 new fuel cell electric buses (FCEB) operating in Oakland, California. The 12 FCEBs operate as a part of the Zero Emission Bay Area (ZEBA) Demonstration, which also includes two new hydrogen fueling stations. This effort is the largest FCEB demonstration in the United States and involves five participating transit agencies. The ZEBA partners are collaborating with the U.S. Department of Energy (DOE) and DOE's National Renewable Energy Laboratory (NREL) to evaluate the buses in revenue service. The first results report was published in August 2011, describing operation of these new FCEBs from September 2010 through May 2011. New results in this report provide an update through April 2012.

  10. Zero Emission Bay Area (ZEBA) Fuel Cell Bus Demonstration Results: Third Report

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, L.; Post, M.

    2014-05-01

    This report presents results of a demonstration of 12 fuel cell electric buses (FCEB) operating in Oakland, California. The 12 FCEBs operate as a part of the Zero Emission Bay Area (ZEBA) Demonstration, which also includes two new hydrogen fueling stations. This effort is the largest FCEB demonstration in the United States and involves five participating transit agencies. The ZEBA partners are collaborating with the U.S. Department of Energy (DOE) and DOE's National Renewable Energy Laboratory (NREL) to evaluate the buses in revenue service. NREL has published two previous reports, in August 2011 and July 2012, describing operation of these buses. New results in this report provide an update covering eight months through October 2013.

  11. Assessment of occupational exposure to BTEX compounds at a bus diesel-refueling bay: A case study in Johannesburg, South Africa.

    Science.gov (United States)

    Moolla, Raeesa; Curtis, Christopher J; Knight, Jasper

    2015-12-15

    Of increasing concern is pollution by volatile organic compounds, with particular reference to five aromatic hydrocarbons (benzene, toluene, ethyl benzene and two isomeric xylenes; BTEX). These pollutants are classified as hazardous air pollutants. Due to the potential health risks associated with these pollutants, BTEX concentrations were monitored at a bus diesel-refueling bay, in Johannesburg, South Africa, using gas chromatography, coupled with a photo-ionization detector. Results indicate that o-xylene (29-50%) and benzene (13-33%) were found to be the most abundant species of total BTEX at the site. Benzene was within South African occupational limits, but above international occupational exposure limits. On the other hand, occupational concentrations of toluene, ethyl-benzene and xylenes were within national and international occupational limits throughout the monitoring period, based on 8-hour workday weighted averages. Ethyl-benzene and p-xylene concentrations, during winter, correspond to activity at the site, and thus idling of buses during refueling may elevate results. Overall, occupational air quality at the refueling bay is a matter of health concern, especially with regards to benzene exposure, and future reduction strategies are crucial. Discrepancies between national and international limit values merit further investigation to determine whether South African guidelines for benzene are sufficiently precautionary.

  12. BUS 650 UOP Material - bus650dotcom

    OpenAIRE

    lucky108

    2015-01-01

    For more course tutorials visit www.bus650.com BUS 650 Week 1 DQ 1 The Role of Financial Management in a Firm BUS 650 Week 1 DQ 2 Short Term or Long Term View BUS 650 Week 1 Financial Management Challenges BUS 650 Week 2 DQ 1 Initial Investment BUS 650 Week 2 DQ 2 Managing Earnings BUS 650 Week 2 Return on Investment Education Funding BUS 650 Week 3 DQ 1 GAAP vs. IFRS BUS 650 Week 3 DQ 2 Capital Rationing BUS 650 Week 3 Journal Capital Budgeting BUS 650 Week 3 Management of Working Capital Ca...

  13. BUS 372 ASH Material - bus372dotcom

    OpenAIRE

    lucky108

    2015-01-01

    For more course tutorials visit www.bus372.com       BUS 372 Week 1 DQ 1 The Role of Unionization (Ash Course) BUS 372 Week 1 DQ 2 Meeting Member Needs (Ash Course) BUS 372 Week 2 DQ 1 Profit Interest and Employee Interest (Ash Course) BUS 372 Week 2 DQ 2 Union Requirements (Ash Course) BUS 372 Week 2 Assignment Changing Landscape of Unions (Ash Course) BUS 372 Week 2 Quiz (Ash Course) BUS 372 Week 3 DQ 1 Strikes (Ash Course) BUS ...

  14. BUS 372 Tutorials / bus372dotcom

    OpenAIRE

    sunshine3811

    2015-01-01

    For more course tutorials visit www.bus372.com       BUS 372 Week 1 DQ 1 The Role of Unionization (Ash Course) BUS 372 Week 1 DQ 2 Meeting Member Needs (Ash Course) BUS 372 Week 2 DQ 1 Profit Interest and Employee Interest (Ash Course) BUS 372 Week 2 DQ 2 Union Requirements (Ash Course) BUS 372 Week 2 Assignment Changing Landscape of Unions (Ash Course) BUS 372 Week 2 Quiz (Ash Course) BUS 372 Week 3 DQ 1 Strikes (Ash Course) BUS ...

  15. BUS 401 Courses / bus401tutorialdotcom

    OpenAIRE

    uophelp

    2015-01-01

     FOR MORE CLASSES VISIT www.bus401tutorial.com BUS 401 Week 1 DQ 1 Corporate Income Tax and Real Interest Rates (Ash Course) BUS 401 Week 1 DQ 2 Cash Flow and Ratio Analysis (Ash Course)  BUS 401 Week 1 Assignment Ratio Analysis (Ash Course) BUS 401 Week 1 Quiz (Ash Course) BUS 401 Week 2 DQ 1 Annuity and Capital Asset Pricing (Ash Course) BUS 401 Week 2 DQ 2 Bonds and Common Stock (Ash Course) BUS 401 Week 2 Assignment Alternative Investments (Ash Co...

  16. BUS 401 COURSES / bus401tutordotcom

    OpenAIRE

    uophelp

    2015-01-01

    FOR MORE CLASSES VISIT www.bus401tutor.com   BUS 401 Week 1 DQ 1 Corporate Income Tax and Real Interest Rates (Ash Course) BUS 401 Week 1 DQ 2 Cash Flow and Ratio Analysis (Ash Course)  BUS 401 Week 1 Assignment Ratio Analysis (Ash Course) BUS 401 Week 1 Quiz (Ash Course) BUS 401 Week 2 DQ 1 Annuity and Capital Asset Pricing (Ash Course) BUS 401 Week 2 DQ 2 Bonds and Common Stock (Ash Course) BUS 401 Week 2 Assignment Alternative Investments (Ash ...

  17. BUS 660 ASH Course Tutorial / bus660dotcom

    OpenAIRE

    vasanthi moola

    2015-01-01

    BUS 660 Entire Course For more course tutorials visit www.bus660.com   BUS 660 Week 1 Assignment Developing Leaders at UPS BUS 660 Week 2 Assignment Leadership Style BUS 660 Week 3 Assignment Leadership Traits BUS 660 Week 4 Assignment Leadership Skills BUS 660 Week 5 Assignment Big Changes for a Small Hospital BUS 660 Week 6 Assignment Research Paper BUS 660 Week 1 DQ 1 Leadership Defined BUS 660 Week 1 DQ 2 Education and Experience BUS 66...

  18. BUS 210 Course tutorial/ indigohelp

    OpenAIRE

    WVFD

    2015-01-01

    For more classes visit www.indigohelp.com   BUS 210 Week 1 DQ1 and DQ2 BUS 210 Week 1 Checkpoint Business Models and Systems (2 Sets) BUS 210 Week 1 Knowledge Check BUS 210 Week 2 CheckPoint Business Organization  (2 Sets) BUS 210 Week 2 Knowledge Check BUS 210 Week 2 Assignment Evolution of Business Presentation (2 Sets) BUS 210 Week 3 DQ 1 and DQ 2 BUS 210 Week 3 CheckPoint Code of Ethics (2 Sets) BUS 210 Week 3 Knowledge Check BUS 2...

  19. BUS 475 UOP Course Tutorial/ Tutorialrank

    OpenAIRE

    john

    2015-01-01

    For more course tutorials visit www.tutorialrank.com Tutorial Purchased: 6 Times, Rating: A+   BUS 475 Capstone Final Examination Part 1   1.    In the managerial function of __________, managers encourage and motivate workers to work toward organizational goals.   2.    eBay.com is a vast auction site that is similar to a competitive market in some ways but differs from it in others. Which of the following describes...

  20. PCI bus demystified

    CERN Document Server

    Abbott, Doug

    2004-01-01

    The peripheral component interconnect (PCI) bus is the dominant bus system used to connect the different elements making up today''s high-performance computer systems. Different PCI implementations have also been developed for such applications as telecommunications and embedded computing. If an application calls for high speed, high reliability, flexible configuration, and bus mastering, then PCI is the only logical bus choice. This book is an applications-oriented introduction to the PCI bus, with an emphasis on implementing PCI in a variety of computer architectures. Special attention is given to industrial and mission-critical applications of PCI bus.·Fully describes PCI electrical specifications, mechanical requirements, and signal types·Covers advanced topics through numerous design examples to increase the readers understanding of the subject ·Includes updated coverage of PCI-X 2.0

  1. Intelligent Bus Stops in the Flexible Bus Systems

    Directory of Open Access Journals (Sweden)

    Razi Iqbal

    2014-09-01

    Full Text Available The purpose of this paper is to discuss Intelligent Bus Stops in a special Demand Responsive Transit (DRT, the Flexible Bus System. These Intelligent Bus Stops are more efficient and information rich than Traditional Bus Stops. The real time synchronization of the Flexible Bus System makes it unique as compared to Traditional Bus Systems. The Main concern is to make Bus Stops intelligent and information rich. Buses are informed about the no. of passengers waiting at the upcoming Bus Stops. If there are no passengers to ride or get off on upcoming Bus Stop, the Bus can skip that Bus Stop and head towards the next Bus Stop where passenger is waiting, which will decrease the ride time of the passengers on the Bus and also the wait time of the passengers waiting on the upcoming Bus Stops. Providing more information at Bus Stops about the Destination (Time to Destination, Distance to Destination etc. and Buses (Bus Location, Arrival Time of Bus etc. makes it easier for the passengers to decide whether to ride a particular Bus or not.

  2. TPG bus passes

    CERN Multimedia

    Staff Association

    2013-01-01

    The CERN Staff Association will stop selling TPG bus passes. All active and retired members of the CERN personnel will be able to purchase Unireso bus passes from the CERN Hostel - Building 39 (Meyrin site) from 1st February 2013. For more information: https://cds.cern.ch/journal/CERNBulletin/2013/04/Announcements/1505279?ln=en

  3. The erigone bus study

    International Nuclear Information System (INIS)

    A study has been made of some factors determining the performance and cost-effectiveness of microcomputer bus systems implemented in Europa crates. An experimental system has been specified and a number of modules constructed in accordance with the specification, in order to test the validity of some of the ideas proposed. It has been demonstrated that the bus interfacing logic can be simple and inexpensive, while maintaining a high degree of processor independence and also a high degree of transparency in operation. The number of pins required by the bus is minimized by multiplexing address and data. A series termination for the drive of the multiplexed lines permits cross-talk to be reduced to insignificant levels: this technique is recommended for wider application. The experimental bus is proposed as a basis for the construction of simple microcomputer-based instrumentation systems. (orig.)

  4. Bus.py

    Energy Technology Data Exchange (ETDEWEB)

    2014-07-21

    GridLAB-D is an agent? based distribution system simulation environment that allows fine-grained end-user models, including geospatial and network topology detail. GridLAB-D addresses the lack of runtime interaction by designing a flexible communication interface, Bus.py (pronounced bus-dot-pie), that uses Python to pass messages between one or more GridLAB-D instances and a Smart Grid simulator.

  5. Savannah River bus project

    Energy Technology Data Exchange (ETDEWEB)

    Summers, W.A. [Westinghouse Savannah River Co., Aiken, SC (United States)

    1998-08-01

    The H2Fuel Bus is the world`s first hybrid hydrogen electric transit bus. It was developed through a public/private partnership involving several leading technology and industrial organizations in the Southeast, with primary funding and program management provided by the Department of Energy. The primary goals of the project are to gain valuable information on the technical readiness and economic viability of hydrogen buses and to enhance the public awareness and acceptance of emerging hydrogen technologies. The bus has been operated by the transit agency in Augusta, Georgia since April, 1997. It employs a hybrid IC engine/battery/electric drive system, with onboard hydrogen fuel storage based on the use of metal hydrides. Initial operating results have demonstrated an overall energy efficiency (miles per Btu) of twice that of a similar diesel-fueled bus and an operating range twice that of an all-battery powered electric bus. Tailpipe emissions are negligible, with NOx less than 0.2 ppm. Permitting, liability and insurance issues were addressed on the basis of extensive risk assessment and safety analyses, with the inherent safety characteristic of metal hydride storage playing a major role in minimizing these concerns. Future plans for the bus include continued transit operation and use as a national testbed, with potential modifications to demonstrate other hydrogen technologies, including fuel cells.

  6. LHC on the bus

    CERN Document Server

    Laëtitia Pedroso

    2010-01-01

    On 15 December, an airport bus will be transformed in the image of CERN. The bus will be seen by the thousands of travellers arriving in Geneva, informing them of the possibility to visit CERN.   Sketch of the bus. The good relationship between Geneva International Airport and CERN started several years ago. In 2004 the airport put advertising space in the arrivals area at CERN's disposal free of charge. Now, starting on 15 December, a 40-foot long bus will display a giant sticker advertisement depicting CERN as it takes passengers over the airport tarmac to their planes. This is no ordinary sticker, and it was no mean task to attach it to the bus. The task of producing and attaching it was entrusted to Geneva-based specialists Mathys SA. With the ski season opening on 15 December, there will be many travellers arriving at the airport, and the bus will be ready to receive them. When one thinks of CERN, the subjects that naturally come to mind are the LHC, the mysteries of the Universe...

  7. BUS 660 Ash course tutorial / uophelp

    OpenAIRE

    uophelp

    2015-01-01

      www.uophelp.com         BUS 660 Week 1 Assignment Developing Leaders at UPS BUS 660 Week 2 Assignment Leadership Style BUS 660 Week 3 Assignment Leadership Traits BUS 660 Week 4 Assignment Leadership Skills BUS 660 Week 5 Assignment Big Changes for a Small Hospital BUS 660 Week 6 Assignment Research Paper BUS 660 Week 1 DQ 1 Leadership Defined BUS 660 Week 1 DQ 2 Education and Experience BUS 660 Week 2 DQ 1 Lea...

  8. BusTechn

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Introduced the characteristics of series communicat io n I 2C bus and basic communication protocol, and introduced the application of the bus I 2C according to the image sensor OV7610.The computer correspondence s tyle can be divided the parallel correspondence and the series correspondence. T he rate of series correspondence is rapid, and the property of real time is exce llent. Because the number of ports which it takes is great, it is not proper to miniaturize. Whereas the rate of series corresponden...

  9. Learning NServiceBus

    CERN Document Server

    Boike, David

    2013-01-01

    This is a practical tutorial containing hands-on examples for creating a messaging and SOA based service bus.This book is for .NET developers who are looking for ways to overcome problems related to buggy third party web service integrations, codebases that have grown into a big ball of mud, and batch jobs failure.

  10. BUS 401 Ash course tutorial / uophelp

    OpenAIRE

    uophelp

    2015-01-01

    For more course tutorials visit www.uophelp.com   BUS 401 Week 1 DQ 1 Corporate Income Tax and Real Interest Rates BUS 401 Week 1 DQ 2 Cash Flow and Ratio Analysis BUS 401 Week 1 Assignment Ratio Analysis BUS 401 Week 1 Quiz BUS 401 Week 2 DQ 1 Annuity and Capital Asset Pricing BUS 401 Week 2 DQ 2 Bonds and Common Stock BUS 401 Week 2 Assignment Alternative Investments BUS 401 Week 2 Quiz BUS 401 Week 3 DQ 1 NPV, PI, and IRR BUS 401 Week 3 ...

  11. BUS 437 UOP Course Tutorial/ Tutorialrank

    OpenAIRE

    john

    2015-01-01

    For more course tutorials visit www.tutorialrank.com Tutorial Purchased: 4 Times, Rating: A+   ASHFORD BUS 437 Week 1 Assignment Company Description ASHFORD BUS 437 Week 1 DQ 1 Writing the Business Plan ASHFORD BUS 437 Week 1 DQ 2 Using Outside Help to Write the Plan ASHFORD BUS 437 Week 2 Assignment Marketing Section ASHFORD BUS 437 Week 2 DQ 1 Customer Survey ASHFORD BUS 437 Week 2 DQ 2 Industry Analysis ASHFORD BUS 437 Week 3 Assignment Strategy...

  12. BUS 402 Ash course tutorial / uophelp

    OpenAIRE

    uophelp-

    2015-01-01

    For more course tutorials visit www.uophelp.com     BUS 402 Week 1 DQ 1 Environmental Changes BUS 402 Week 1 DQ 2 Vision and Mission BUS 402 Week 2 DQ 1 Components of External Environment  BUS 402 Week 2 DQ 2 Components of Internal Analysis BUS 402 Week 2 Assignment Starbucks S.W.O.T. Analysis BUS 402 Week 3 DQ 1 Market Positioning Strategies BUS 402 Week 3 DQ 2 Vertical Integration BUS 402 Week 4 DQ 1 International Markets BUS 40...

  13. BUS 642 Ash course tutorial / uophelp

    OpenAIRE

    uophelp

    2015-01-01

    www.uophelp.com     BUS 642 Week 1 DQ 1 Scientific Thinking (Ash Course) BUS 642 Week 1 DQ 2 Making Research Decisions (Ash Course) BUS 642 Week 1 Exercises (Ash Course) BUS 642 Week 2 DQ 1 Ethics in Business Research (Ash Course) BUS 642 Week 2 DQ 2 Design of Research (Ash Course) BUS 642 Week 2 Exercises (Ash Course) BUS 642 Week 3 DQ 1 Measurement Scales (Ash Course) BUS 642 Week 3 DQ 2 Clarifying the Research Questions (Ash Course) BUS...

  14. BUS 437 Ash course tutorial / uophelp

    OpenAIRE

    uophelp

    2015-01-01

    For more course tutorials visit www.uophelp.com   BUS 437 Week 1 Assignment Company Description BUS 437 Week 1 DQ 1 Writing the Business Plan BUS 437 Week 1 DQ 2 Using Outside Help to Write the Plan BUS 437 Week 2 Assignment Marketing Section BUS 437 Week 2 DQ 1 Customer Survey BUS 437 Week 2 DQ 2 Industry Analysis BUS 437 Week 3 Assignment Strategy, Implementation, & Management Sections BUS 437 Week 3 DQ 1 Implementation BUS 437 Week 3 DQ ...

  15. Car Delay Model near Bus Stops with Mixed Traffic Flow

    Directory of Open Access Journals (Sweden)

    Yang Xiaobao

    2013-01-01

    Full Text Available This paper proposes a model for estimating car delays at bus stops under mixed traffic using probability theory and queuing theory. The roadway is divided to serve motorized and nonmotorized traffic streams. Bus stops are located on the nonmotorized lanes. When buses dwell at the stop, they block the bicycles. Thus, two conflict points between car stream and other traffic stream are identified. The first conflict point occurs as bicycles merge to the motorized lane to avoid waiting behind the stopping buses. The second occurs as buses merge back to the motorized lane. The average car delay is estimated as the sum of the average delay at these two conflict points and the delay resulting from following the slower bicycles that merged into the motorized lane. Data are collected to calibrate and validate the developed model from one site in Beijing. The sensitivity of car delay to various operation conditions is examined. The results show that both bus stream and bicycle stream have significant effects on car delay. At bus volumes above 200 vehicles per hour, the curbside stop design is not appropriate because of the long car delays. It can be replaced by the bus bay design.

  16. 77 FR 48592 - Bus and Bus Facilities Discretionary Program Funds

    Science.gov (United States)

    2012-08-14

    ... authorized by 49 U.S.C. 5309(b), as amended by Section 3011 of the Safe, Affordable, Flexible, Efficient... Livability Initiatives (77 FR 6178). The NOFA explained the requirements and procedures for eligible... facilities, bus-related equipment, and transit asset management systems. The FY 2012 Bus...

  17. BUS 611 Ash course tutorial / uophelp

    OpenAIRE

    uophelp

    2015-01-01

    For more course tutorials visit www.uophelp.com   BUS 611 Week 1 Assignment Article Review (Ash Course) BUS 611 Week 2 Assignment Project Risk (Ash Course) BUS 611 Week 3 Assignment WBS (Ash Course) BUS 611 Week 4 Assignment Integrated Project Management Tools (Ash Course) BUS 611 Week 5 Assignment Monthly Status Reports (Ash Course) BUS 611 Week 6 Final Research Paper (Ash Course)  

  18. BUS 620 Ash course tutorial / uophelp

    OpenAIRE

    uophelp

    2015-01-01

    For more course tutorials visit www.uophelp.com   BUS 620 Week 1 DQ 1 What is Marketing (Ash Course) BUS 620 Week 1 DQ 2 Marketing Strategies (Ash Course) BUS 620 Week 1 The Future of the New York Times (Ash Course) BUS 620 Week 2 DQ 1 Buyer Behavior (Ash Course) BUS 620 Week 2 DQ 2 Customer Needs (Ash Course) BUS 620 Week 2 Industry Forecasting (Ash Course) BUS 620 Week 3 DQ 1 Braining Nordstrom (Ash Course) BUS 620 Week 3 DQ 2 Marketing Segmentat...

  19. Learning NServiceBus Sagas

    CERN Document Server

    Helton, Rich

    2015-01-01

    If you are an Enterprise C# developer who wishes to extend your knowledge of NServiceBus and Enterprise Service Bus in C#, this is the book for you. This book is designed to enhance the education of ESBs and their messaging, whether you are a beginner or a seasoned expert in Enterprise C#, Apex, and Visualforce pages.

  20. Standard satellite data bus initiative

    Science.gov (United States)

    Spinney, Timothy; Yousef, Hassan

    The USAF Space Technology Center manages programs to reduce satellite costs through the appropriate use of microelectronics standardization. Ongoing programs such as the Standard Spacecraft Memory Module and Generic VHSIC Spaceborne Computer have provided an insight into the value of standardization and led to an initiative to coordinate microelectronics development around a standard satellite data bus, which should reduce costs by eliminating program- and contractor-unique interfaces, increasing production runs, and developing generic test equipment. Current efforts focus on the satellite housekeeping functions, and it is expected that the mission payload would also use this data bus. Based on existing housekeeping data-traffic requirements, several candidates have been identified for the standard data bus. The two candidates selected for further work are the ANSI X3T9.5 data bus and the linear token-passing data bus being proposed as part of the Advanced Tactical Fighter effort.

  1. The Myth of the "Ideal Bus"

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ Does as an ideal bus technology exist? Many companies have and will promote a single technology as the ideal bus that will meet all application needs, but in actuality, each bus technology has its own strengths and weaknesses and thus is appropriate for different applications. History has shown the folly of claiming an ideal bus for every application.

  2. High-Speed Ring Bus

    Science.gov (United States)

    Wysocky, Terry; Kopf, Edward, Jr.; Katanyoutananti, Sunant; Steiner, Carl; Balian, Harry

    2010-01-01

    The high-speed ring bus at the Jet Propulsion Laboratory (JPL) allows for future growth trends in spacecraft seen with future scientific missions. This innovation constitutes an enhancement of the 1393 bus as documented in the Institute of Electrical and Electronics Engineers (IEEE) 1393-1999 standard for a spaceborne fiber-optic data bus. It allows for high-bandwidth and time synchronization of all nodes on the ring. The JPL ring bus allows for interconnection of active units with autonomous operation and increased fault handling at high bandwidths. It minimizes the flight software interface with an intelligent physical layer design that has few states to manage as well as simplified testability. The design will soon be documented in the AS-1393 standard (Serial Hi-Rel Ring Network for Aerospace Applications). The framework is designed for "Class A" spacecraft operation and provides redundant data paths. It is based on "fault containment regions" and "redundant functional regions (RFR)" and has a method for allocating cables that completely supports the redundancy in spacecraft design, allowing for a complete RFR to fail. This design reduces the mass of the bus by incorporating both the Control Unit and the Data Unit in the same hardware. The standard uses ATM (asynchronous transfer mode) packets, standardized by ITU-T, ANSI, ETSI, and the ATM Forum. The IEEE-1393 standard uses the UNI form of the packet and provides no protection for the data portion of the cell. The JPL design adds optional formatting to this data portion. This design extends fault protection beyond that of the interconnect. This includes adding protection to the data portion that is contained within the Bus Interface Units (BIUs) and by adding to the signal interface between the Data Host and the JPL 1393 Ring Bus. Data transfer on the ring bus does not involve a master or initiator. Following bus protocol, any BIU may transmit data on the ring whenever it has data received from its host. There

  3. Hybrid fuel cell bus demonstration: advanced technology moves bus forward

    International Nuclear Information System (INIS)

    The Province of Manitoba has been actively pursuing hydrogen since 2001 as one part of a portfolio of renewable energy alternatives. Six priority hydrogen actions have been underway covering a variety of opportunities, including two recently completed major transit bus and refueling demonstrations. A brief overview of Manitoba's activities on hydrogen will be provided, emphasizing the lessons learned from recent projects such as the hydrogen Hybrid Fuel Cell Bus demonstration, and in particular implications for the research community. (author)

  4. BUS 402 UOP Course Tutorial/ Tutorialrank

    OpenAIRE

    jonh

    2015-01-01

    For more course tutorials visit www.tutorialrank.com Tutorial Purchased: 4 Times, Rating: A+   ASHFORD BUS 402 Week 1 DQ 1 Environmental Changes ASHFORD BUS 402 Week 1 DQ 2 Vision and Mission ASHFORD BUS 402 Week 2 DQ 1 Components of External Environment ASHFORD BUS 402 Week 2 DQ 2 Components of Internal Analysis ASHFORD BUS 402 Week 2 Assignment Starbucks S.W.O.T. Analysis ASHFORD BUS 402 Week 3 DQ 1 Market Positioning Strategies ASHFORD BUS 402 W...

  5. BUS 501 Str course tutorial / uophelp

    OpenAIRE

    uophel

    2015-01-01

    For more course tutorials visit www.uophelp.com     BUS 501 Week 3 Assignment 1 The Independent Government Cost Estimate and the Statement of Work (Str Course) BUS 501 Week 4 Assignment 2 Types of Contracts and Performance-Based Acquisition (Str Course) BUS 501 Week 7 Assignment 3 Small Business Program and Source Selection Plans (Str Course) BUS 501 Assignment 4 Technical and Cost or Price Evaluations and Price Reasonableness (Str Course) BUS 501 Wee...

  6. BUS 599 Str course tutorial / uophelp

    OpenAIRE

    uophelp

    2015-01-01

    For more course tutorials visit www.uophelp.com   BUS 599 Week 1 Assignment Crafting and Executing Strategy Case JetBlue Airways BUS 599 Assignment #2 Competitive Forces and SWOT Analysis # Case Whole Foods Market BUS 599 Week 3 Assignment Foreign Market Entry and Diversification Case Corona Beer BUS 599 Week 4 Assignment HRM Issues Diversification Strategies Case Nucor Corporation BUS 599 Week 5 Assignment Corporate Culture Leadership Actions for Strategy Imp...

  7. SCHOOL BUS GARAGES, 1966 REVISION.

    Science.gov (United States)

    JOHNSON, HERBERT F.

    STANDARDS AND RECOMMENDATIONS ARE GIVEN FOR THE DESIGN AND CONSTRUCTION OF SCHOOL BUS GARAGES INCLUDING BRIEF DISCUSSIONS OF--(1) SITE DEVELOPMENT, (2) DESIGN AND CONSTRUCTION, AND (3) MECHANICAL (HEATING, PLUMBING, AND VENTILATION) AND ELECTRICAL FACTORS. (JT)

  8. Hydrogen Bus Technology Validation Program

    OpenAIRE

    Burke, Andy; McCaffrey, Zach; Miller, Marshall; Collier, Kirk; Mulligan, Neal

    2005-01-01

    Heavy duty engines are substantial contributors to NOX and PM emissions inventories in urban areas, and stringent emissions standards have been adopted as a consequence. CARB has passed very strict emissions standards for heavy duty engines beginning in 2007. Meeting these standards, especially for NOX emissions, may be difficult for conventional transit bus technologies. The purpose of the Hydrogen Bus Technology Evaluation Program was to develop and evaluate hydrogen enriched natural gas (H...

  9. Bus Stop - Environment Connection: Do Characteristics of the Built Environment Correlate with Bus Stop Crime?

    OpenAIRE

    Robin S Liggett; Loukaitou-Sideris, Anastasia; Iseki, Hiroyuki

    2003-01-01

    Can we understand why some bus stops are safe and others are crime-ridden? Can we predict which features of the bus stop environment are likely to encourage or discourage crime? Can we design safer bus stops? These questions are addressed by exploring the relationship between environmental variables and bus stop crime. An earlier study used crime data, along with environmental indicators, for a sample of 60 bus stops in downtown Los Angeles. Crime rates were higher for bus stops near alleys, ...

  10. Wishbone bus Architecture - A Survey and Comparison

    CERN Document Server

    Sharma, Mohandeep; 10.5121/vlsic.2012.3210

    2012-01-01

    The performance of an on-chip interconnection architecture used for communication between IP cores depends on the efficiency of its bus architecture. Any bus architecture having advantages of faster bus clock speed, extra data transfer cycle, improved bus width and throughput is highly desirable for a low cost, reduced time-to-market and efficient System-on-Chip (SoC). This paper presents a survey of WISHBONE bus architecture and its comparison with three other on-chip bus architectures viz. Advanced Micro controller Bus Architecture (AMBA) by ARM, CoreConnect by IBM and Avalon by Altera. The WISHBONE Bus Architecture by Silicore Corporation appears to be gaining an upper edge over the other three bus architecture types because of its special performance parameters like the use of flexible arbitration scheme and additional data transfer cycle (Read-Modify-Write cycle). Moreover, its IP Cores are available free for use requiring neither any registration nor any agreement or license.

  11. BUS 210 UOP Course Tutorial/ Tutorialrank

    OpenAIRE

    john

    2015-01-01

                      For more course tutorials visit www.tutorialrank.com Tutorial Purchased: 6 Times, Rating: A+   BUS 210 Week 1 DQ1 and DQ2 (UOP Course) BUS 210 Week 1 Checkpoint Business Models and Systems (UOP Course) BUS 210 Week 2 CheckPoint Business Organization (UOP Course) BUS 210 Week 2 Assignment Evolution of Business Presentation (UOP Course) BUS 210 Week 3 DQ 1 and DQ 2 (UOP Course) BUS 210 W...

  12. Aids to School Bus Design

    Science.gov (United States)

    1991-01-01

    Navistar International Transportation Corporation, Chicago, IL, used three separate NASA-developed technologies in the design and testing of their 3000 Series Bus Chassis which was developed expressly for school bus applications. For structural analysis, they used the MSC/NASTRAN program which mathematically analyzes a design and predicts how it will hold up under stress. They also used the SPATE 9000 system for non-contact measurement of stress, load transfer mechanisms, detection of hidden flaws, and monitoring structural changes during fatigue testing. SPATE 9000 was based on infrared stress measurement technology developed by Langley Research Center. They also employed the Wyle Ride Quality Meter, which was developed by Langley to aid in passenger aircraft design by providing an accurate measurement of ride vibration and sound level. These numbers translate into a subjective discomfort level index. These technologies contribute to the company's 45-48 percent share of the school bus chassis market.

  13. School bus and children's traffic safety

    Institute of Scientific and Technical Information of China (English)

    PAN Shu-ming; Stephen Hargarten; ZHU Shan-kuan

    2007-01-01

    There is no safer way to transport a child than a school bus. Fatal crashes involving occupants are extremely rare events in the US. In recent years, school bus transportation began to develop in China. We want to bring advanced experience on school bus safety in Western countries such as the US to developing countries.Methods: We searched the papers related to school bus safety from Medline, Chinese Scientific Journals Database and the Web of the National Highway Traffic Safety Administration (NHTSA).Results: There were only 9 papers related to school bus safety, which showed that higher levels of safety standards on school buses, school bus-related transportation and environmental laws and injury prevention were the primary reasons for the desired outcome. Few school bus is related to deaths and injuries in the developed countries.Conclusions: The developing countries should make strict environmental laws and standards on school bus safety to prevent children's injury and death.

  14. HERMES travels by CAN bus

    Science.gov (United States)

    Waller, Lewis G.; Shortridge, Keith; Farrell, Tony J.; Vuong, Minh; Muller, Rolf; Sheinis, Andrew I.

    2014-07-01

    The new HERMES spectrograph represents the first foray by AAO into the use of commercial off-the-shelf industrial field bus technology for instrument control, and we regard the final system, with its relatively simple wiring requirements, as a great success. However, both software and hardware teams had to work together to solve a number of problems integrating the chosen CANopen/CAN bus system into our normal observing systems. A Linux system running in an industrial PC chassis ran the HERMES control software, using a PCI CAN bus interface connected to a number of distributed CANopen/CAN bus I/O devices and servo amplifiers. In the main, the servo amplifiers performed impressively, although some experimentation with homing algorithms was required, and we hit a significant hurdle when we discovered that we needed to disable some of the encoders used during observations; we learned a lot about how servo amplifiers respond when their encoders are turned off, and about how encoders react to losing power. The software was based around a commercial CANopen library from Copley Controls. Early worries about how this heavily multithreaded library would work with our standard data acquisition system led to the development of a very low-level CANopen software simulator to verify the design. This also enabled the software group to develop and test almost all the control software well in advance of the construction of the hardware. In the end, the instrument went from initial installation at the telescope to successful commissioning remarkably smoothly.

  15. Low-inductance bus lines

    Science.gov (United States)

    Kernick, A.

    1977-01-01

    Laminated bus strips and bifilar litz cable connectors for high-power rectifiers, thrisistors, and transistors provide low inductance and eliminate electromagnetic interference in high-power circuits. These techniques offer significant cost advantages because of ease of assembly and consistent high quality of product. Effectiveness makes general usage in static power conversion likely.

  16. Pybus -- A Python Software Bus

    Energy Technology Data Exchange (ETDEWEB)

    Lavrijsen, Wim T.L.P.

    2004-10-14

    A software bus, just like its hardware equivalent, allows for the discovery, installation, configuration, loading, unloading, and run-time replacement of software components, as well as channeling of inter-component communication. Python, a popular open-source programming language, encourages a modular design on software written in it, but it offers little or no component functionality. However, the language and its interpreter provide sufficient hooks to implement a thin, integral layer of component support. This functionality can be presented to the developer in the form of a module, making it very easy to use. This paper describes a Pythonmodule, PyBus, with which the concept of a ''software bus'' can be realized in Python. It demonstrates, within the context of the ATLAS software framework Athena, how PyBus can be used for the installation and (run-time) configuration of software, not necessarily Python modules, from a Python application in a way that is transparent to the end-user.

  17. Pybus - A Python Software Bus

    International Nuclear Information System (INIS)

    A software bus, just like its hardware equivalent, allows for the discovery, installation, configuration, loading, unloading, and run-time replacement of software components, as well as channeling of inter-component communication. Python, a popular open-source programming language, encourages a modular design on software written in it, but it offers little or no component functionality. However, the language and its interpreter provide sufficient hooks to implement a thin, integral layer of component support. This functionality can be presented to the developer in the form of a module, making it very easy to use. This paper describes a Pythonmodule, PyBus, with which the concept of a ''software bus'' can be realized in Python. It demonstrates, within the context of the ATLAS software framework Athena, how PyBus can be used for the installation and (run-time) configuration of software, not necessarily Python modules, from a Python application in a way that is transparent to the end-user

  18. Analysis of robustness of urban bus network

    Science.gov (United States)

    Tao, Ren; Yi-Fan, Wang; Miao-Miao, Liu; Yan-Jie, Xu

    2016-02-01

    In this paper, the invulnerability and cascade failures are discussed for the urban bus network. Firstly, three static models(bus stop network, bus transfer network, and bus line network) are used to analyse the structure and invulnerability of urban bus network in order to understand the features of bus network comprehensively. Secondly, a new way is proposed to study the invulnerability of urban bus network by modelling two layered networks, i.e., the bus stop-line network and the bus line-transfer network and then the interactions between different models are analysed. Finally, by modelling a new layered network which can reflect the dynamic passenger flows, the cascade failures are discussed. Then a new load redistribution method is proposed to study the robustness of dynamic traffic. In this paper, the bus network of Shenyang City which is one of the biggest cities in China, is taken as a simulation example. In addition, some suggestions are given to improve the urban bus network and provide emergency strategies when traffic congestion occurs according to the numerical simulation results. Project supported by the National Natural Science Foundation of China (Grant Nos. 61473073, 61374178, 61104074, and 61203329), the Fundamental Research Funds for the Central Universities (Grant Nos. N130417006, L1517004), and the Program for Liaoning Excellent Talents in University (Grant No. LJQ2014028).

  19. Electrical system architecture having high voltage bus

    Science.gov (United States)

    Hoff, Brian Douglas; Akasam, Sivaprasad

    2011-03-22

    An electrical system architecture is disclosed. The architecture has a power source configured to generate a first power, and a first bus configured to receive the first power from the power source. The architecture also has a converter configured to receive the first power from the first bus and convert the first power to a second power, wherein a voltage of the second power is greater than a voltage of the first power, and a second bus configured to receive the second power from the converter. The architecture further has a power storage device configured to receive the second power from the second bus and deliver the second power to the second bus, a propulsion motor configured to receive the second power from the second bus, and an accessory motor configured to receive the second power from the second bus.

  20. BUS 620 ASHFORD Course Tutorial/TutorialRank

    OpenAIRE

    atwater

    2015-01-01

    For more course tutorials visit www.tutorialrank.com Tutorial Purchased: 4 Times, Rating: A   ASHFORD BUS 620 Week 1 DQ 1 What is Marketing   ASHFORD BUS 620 Week 1 DQ 2 Marketing Strategies   ASHFORD BUS 620 Week 1 Assignment Tesco Case   ASHFORD BUS 620 Week 2 DQ 1 Buyer Behavior   ASHFORD BUS 620 Week 2 DQ 2 Customer Needs   ASHFORD BUS 620 Week 2 Industry Forecasting   ASHFORD BUS 620 Week 3...

  1. BUS 660 ASHFORD Course Tutorial/TutorialRank

    OpenAIRE

    john

    2015-01-01

    For more course tutorials visit www.tutorialrank.com Tutorial Purchased: 4 Times, Rating: A+   BUS 660 Week 1 Assignment Developing Leaders at UPS  BUS 660 Week 2 Assignment Leadership Style  BUS 660 Week 3 Assignment Leadership Traits  BUS 660 Week 4 Assignment Leadership Skills  BUS 660 Week 5 Assignment Big Changes for a Small Hospital  BUS 660 Week 6 Assignment Research Paper BUS 660 Week 1 DQ 1Leadership Defined BU...

  2. PinBus Interface Design

    Energy Technology Data Exchange (ETDEWEB)

    Hammerstrom, Donald J.; Adgerson, Jewel D.; Sastry, Chellury; Pratt, Richard M.; Pratt, Robert G.

    2009-12-30

    On behalf of the U.S. Department of Energy, PNNL has explored and expanded upon a simple control interface that might have merit for the inexpensive communication of smart grid operational objectives (demand response, for example) to small electric end-use devices and appliances. The approach relies on bi-directional communication via the electrical voltage states of from one to eight shared interconnection pins. The name PinBus has been suggested and adopted for the proposed interface protocol. The protocol is defined through the presentation of state diagrams and the pins’ functional definitions. Both simulations and laboratory demonstrations are being conducted to demonstrate the elegance and power of the suggested approach. PinBus supports a very high degree of interoperability across its interfaces, allowing innumerable pairings of devices and communication protocols and supporting the practice of practically any smart grid use case.

  3. New TPG bus route 28

    CERN Multimedia

    2003-01-01

    Geneva's Public Transport services (TPG) have recently inaugurated a new bus line 28, connecting the La Tour Hospital in Meyrin to the international organisations in Geneva, via the airport. All signs associated with this route will be yellow in colour. Timetables and route details can be found at http://www.tpg.ch. Relations with the Host States Service http://www.cern.ch/relations/ Tel. 72848

  4. Bus Routes, Marta Bus Routes located in Transportation database, Published in unknown, City of Roswell, GA.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Bus Routes dataset as of unknown. It is described as 'Marta Bus Routes located in Transportation database'. Data by this publisher are often provided in State...

  5. YUTONG BUS: Grateful To The Financial Crisis

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Shenyin&Wanguo Securities issued an announcement on Jan 9 rating Yutong Bus(600066)as"buying",on the basis that the bus maker's gross profits went better in the last quarter of 2008 and to be further improved in the first quarter of 2009,with an increased market share. The report drew attention inside the in- dustry when the entire bus segment was suffering a tough time.

  6. Wishbone Bus Architecture - A Survey and Comparison

    Directory of Open Access Journals (Sweden)

    Mohandeep Sharma

    2012-05-01

    Full Text Available The performance of an on-chip interconnection architecture used for communication between IP cores depends on the efficiency of its bus architecture. Any bus architecture having advantages of faster bus clock speed, extra data transfer cycle, improved bus width and throughput is highly desirable for a low cost, reduced time-to-market and efficient System-on-Chip (SoC. This paper presents a survey of WISHBONE bus architecture and its comparison with three other on-chip bus architectures viz. Advanced Microcontroller Bus Architecture (AMBA by ARM, CoreConnect by IBM and Avalon by Altera. The WISHBONE Bus Architecture by Silicore Corporation appears to be gaining an upper edge over the other three bus architecture types because of its special performance parameters like the use of flexible arbitration scheme and additional data transfer cycle (Read-Modify-Write cycle. Moreover, its IP Cores are available free for use requiring neither any registration nor any agreement or license.

  7. Mastering NServiceBus and persistence

    CERN Document Server

    Helton, Rich

    2014-01-01

    This book is intended for developers, designers, and architects alike who wish to build C# NServiceBus enterprise architectures and learn how ESB persists data and messages to help them attain their goals. No prior knowledge of persistence in NServiceBus is required.

  8. High speed bus technology development

    Science.gov (United States)

    Modrow, Marlan B.; Hatfield, Donald W.

    1989-09-01

    The development and demonstration of the High Speed Data Bus system, a 50 Million bits per second (Mbps) local data network intended for avionics applications in advanced military aircraft is described. The Advanced System Avionics (ASA)/PAVE PILLAR program provided the avionics architecture concept and basic requirements. Designs for wire and fiber optic media were produced and hardware demonstrations were performed. An efficient, robust token-passing protocol was developed and partially demonstrated. The requirements specifications, the trade-offs made, and the resulting designs for both a coaxial wire media system and a fiber optics design are examined. Also, the development of a message-oriented media access protocol is described, from requirements definition through analysis, simulation and experimentation. Finally, the testing and demonstrations conducted on the breadboard and brassboard hardware is presented.

  9. Radiation-Tolerant Dual Data Bus

    Science.gov (United States)

    Kinstler, Gary A.

    2007-01-01

    An architecture, and a method of utilizing the architecture, have been proposed to enable error-free operation of a data bus that includes, and is connected to, commercial off-the-shelf (COTS) circuits and components that are inherently susceptible to singleevent upsets [SEUs (bit flips caused by impinging high-energy particles and photons)]. The architecture and method are applicable, more specifically, to data-bus circuitry based on the Institute for Electrical and Electronics Engineers (IEEE) 1394b standard for a high-speed serial bus.

  10. Drivetrain system of an ultracapacitor electric bus

    Institute of Scientific and Technical Information of China (English)

    Kong Zhigu; Zhu Chunbo; Yang Shiyan; Cheng Shukang

    2007-01-01

    This paper proposed a design of the drivetrain system of an electric bus with ultracapacitor (UC) as the only on-board power source. The system includes three main parts, namely, UC bank, motor and the converter, vehicle management unit (VMU). Analyses results in detail on the functional design and experiments on work bench of each part were also presented, which validated the reliability of the system. Furthermore, driving results in field of the bus verified the feasibility of the design of the drivetrain system. The bus has very good dynamic performances and shows a promising applications prospect in the short and medium route buses system.

  11. BUS 1000母线保护的应用%Application of BUS 1000 Bus-Bar Protection

    Institute of Scientific and Technical Information of China (English)

    马晓光; 张贵金; 冷雪玉

    2001-01-01

    发电厂的母线是电厂中的一个重要组成元件,当母线上发生故障时,将使连接在故障母线上的所有元件在修复故障母线期间,或转换到另一组母线上运行以前遭到停电。同时还可能破坏系统稳定,造成严重后果。因此,母线保护装置是正确迅速切除母线故障的重要装置,它的拒动或误动将给电力系统带来严重危害。详细介绍了华能丹东发电厂350 MW发电机组采用的BUS 1000型母线保护的原理,并对其正常运行及区内、外故障、断路器失灵保护、母联断路器过流保护等几个方面作了详细分析。%Bus bar is an important component in e lectric power plant.When bus bar fault occurs,all components connected on the fa ulty bus bar will be in outage until power restores by repairing the faulty bus bar or switching them over to another bus bar.Furthermore,it may cause the destr uction of system stability resulting in serious consequence.Bus bar protection d evice is the very device to quickly remove bus bar faults,and its malfunctioning will bring serious harm to power system. The principle of BUS 1000 bus bar prot ection used for 350 MW unit of dandong power plant is introduced.Its normal oper ation and several aspects,such as in-and out-area faults,out-of-order breake r protection,bus bar breaker over-current protection,are analyzed in detail.

  12. Incremental bus service design: combining limited-stop and local bus services

    OpenAIRE

    Chiraphadhanakul, Virot; Barnhart, Cynthia

    2013-01-01

    Long in-vehicle travel times resulting from frequent stops make bus service an unattractive choice for many commuters. Limited-stop bus services however have the advantage of shorter in-vehicle times experienced by passengers. In this work, we seek to modify a given bus service by optimally reassigning some number of bus trips, as opposed to providing additional trips, to operate a limited-stop service. We propose an optimization model to determine a limited-stop service route to be operated ...

  13. BUS 599 STRAYER Course Tutorial/TutorialRank

    OpenAIRE

    alfonos

    2015-01-01

    For more course tutorials visit www.tutorialrank.com Tutorial Purchased: 4 Times, Rating: A+ STRAYER BUS 599 Week 1 Assignment Crafting and Executing Strategy Case JetBlue Airways STRAYER BUS 599 Week 2 Assignment Competitive Forces and SWOT Analysis Case Whole Foods Market STRAYER BUS 599 Week 3 Assignment Foreign Market Entry and Diversification Case Corona Beer STRAYER BUS 599 Week 4 Assignment HRM Issues Diversification Strategies Case Nucor Corporation STRAYER BUS 5...

  14. The high speed bus technology development program

    Science.gov (United States)

    Ludvigson, M. T.; Modrow, M. B.; Goldman, P. C.

    The current development status of a high-speed data bus to link MIL-STD-1750A computers in avionics applications is reviewed and illustrated with diagrams and photographs. The bus requirements include data rate 50 Mb/s, a linear token-passing scheme permitting both electronic and fiber-optic implementation, up to 64-terminal capacity, maximum terminal separation 300 ft, latency control via token-rotation-timer priority, self-test and bus-loop test capability, and automatic clock synchronization. The design concept and performance of a breadboard wire bus tested in July 1986 are discussed in detail, with particular attention to the redundancy manager, the output controller, the input controller, the ringmaster topology manager, and typical initial-placement problems.

  15. DESIGN AND EXPERIMENT OF ELECTRIC BUS

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Performance and reliability experiments on BJD-6100EV electric buses, jointly developed by Beijing Institute of Technology and Beijing Public Transport Company, are introduced. Output power model of battery pack is established and maximum output power is analyzed. A permanent magnetic direct current (PMDC) motor with enhanced windings is developed for the bus. Torque-speed characteristics of the motor are modeled and performance of electric bus is analyzed. Computational method of the range of electric bus is proposed and discussed. Experiments show that electric bus can realize design requirements. Computational methods are verified with the help of field test. It is expected that design and computation method will provide helpful reference to development of electric vehicles.

  16. Systems evaluation of thermal bus concepts

    Science.gov (United States)

    Stalmach, D. D.

    1982-01-01

    Thermal bus concepts, to provide a centralized thermal utility for large, multihundred kilowatt space platforms, were studied and the results are summarized. Concepts were generated, defined, and screened for inclusion in system level thermal bus trades. Parametric trade studies were conducted in order to define the operational envelope, performance, and physical characteristics of each. Two concepts were selected as offering the most promise for thermal bus development. All of four concepts involved two phase flow in order to meet the required isothermal nature of the thermal bus. Two of the concepts employ a mechanical means to circulate the working fluid, a liquid pump in one case and a vapor compressor in another. Another concept utilizes direct osmosis as the driving force of the thermal bus. The fourth concept was a high capacity monogroove heat pipe. After preliminary sizing and screening, three of these concepts were selected to carry into the trade studies. The monogroove heat pipe concept was deemed unsuitable for further consideration because of its heat transport limitations. One additional concept utilizing capillary forces to drive the working fluid was added. Parametric system level trade studies were performed. Sizing and weight calculations were performed for thermal bus sizes ranging from 5 to 350 kW and operating temperatures in the range of 4 to 120 C. System level considerations such as heat rejection and electrical power penalties and interface temperature losses were included in the weight calculations.

  17. Dynamic Bus Travel Time Prediction Models on Road with Multiple Bus Routes.

    Science.gov (United States)

    Bai, Cong; Peng, Zhong-Ren; Lu, Qing-Chang; Sun, Jian

    2015-01-01

    Accurate and real-time travel time information for buses can help passengers better plan their trips and minimize waiting times. A dynamic travel time prediction model for buses addressing the cases on road with multiple bus routes is proposed in this paper, based on support vector machines (SVMs) and Kalman filtering-based algorithm. In the proposed model, the well-trained SVM model predicts the baseline bus travel times from the historical bus trip data; the Kalman filtering-based dynamic algorithm can adjust bus travel times with the latest bus operation information and the estimated baseline travel times. The performance of the proposed dynamic model is validated with the real-world data on road with multiple bus routes in Shenzhen, China. The results show that the proposed dynamic model is feasible and applicable for bus travel time prediction and has the best prediction performance among all the five models proposed in the study in terms of prediction accuracy on road with multiple bus routes.

  18. Sexual Harassment on the School Bus: Supporting and Preparing Bus Drivers to Respond Appropriately

    Science.gov (United States)

    Allen, Melissa; Young, Ellie L.; Ashbaker, Betty Y.; Heaton, Emily; Parkinson, Marisa

    2003-01-01

    Sexual harassment is commonplace in schools, particularly among adolescents. Although information on this topic is typically gathered from students and teachers, this study collected information from school bus drivers. Based on feedback from 58 school bus drivers, 39 (67%) reported observing students making sexual comments or jokes. Almost half…

  19. Bullying and Aggression on the School Bus: School Bus Drivers' Observations and Suggestions

    Science.gov (United States)

    deLara, Ellen

    2008-01-01

    Every school day bus drivers are responsible for transporting children safely over many miles, yet they are rarely polled for their opinions or contributions to school safety. School bus drivers are in a unique position to inform the discussion on aggressive behavior during the school day. This exploratory study collected information from school…

  20. Designing Bus Structure for Digital Controller of Nuclear Power Plant

    International Nuclear Information System (INIS)

    In this paper, the bus structure design for the digital controller of Nuclear Power Plant (NPP) is proposed. The most important portion is the bus in the digital controller. A bus is responsible for transmission data among the various Input/Output (I/O) board, Processor board and Communication board. An existing bus is a parallel bus structure such as the VERSA Module Euro (VME) bus and an extended Static Random Access Memory (SRAM) Controller. Central Processing Unit (CPU) processing speed and communication speed is faster than before, but the parallel bus has a speed limit. Because it is the physically lines shared and the weakness about reflected wave. That is, use of the parallel bus has been the cause of the performance degradation of system. To solve the parallel bus problem, the bus has been developed by serial. The configuration of transceiver logic was simplified by not share the bus that all boards and processor boards was connected to the point-to-point. Serial bus was configured using physically Low Voltage Differential Signaling (LVDS). The speed limit of bus was broken by the LVDS what is consisted of a strong against the reflected-wave of signal, noise and etc. Each channel of bus has a different speed mode and is able to set a required transmission way. Different transmission ways of each channel are able to transmit data to match the required response time of system. The LVDS speed has about basically 1Gbps but the bus was composed with less than 50Mbps considering the environmental characteristics of nuclear. It was shown that the configuration of the serial bus was the performance and the reliability more improving than parallel bus

  1. Statistical Analysis of Bus Networks in India

    CERN Document Server

    Chatterjee, Atanu; Ramadurai, Gitakrishnan

    2015-01-01

    Through the past decade the field of network science has established itself as a common ground for the cross-fertilization of exciting inter-disciplinary studies which has motivated researchers to model almost every physical system as an interacting network consisting of nodes and links. Although public transport networks such as airline and railway networks have been extensively studied, the status of bus networks still remains in obscurity. In developing countries like India, where bus networks play an important role in day-to-day commutation, it is of significant interest to analyze its topological structure and answer some of the basic questions on its evolution, growth, robustness and resiliency. In this paper, we model the bus networks of major Indian cities as graphs in \\textit{L}-space, and evaluate their various statistical properties using concepts from network science. Our analysis reveals a wide spectrum of network topology with the common underlying feature of small-world property. We observe tha...

  2. High speed data bus design validation

    Science.gov (United States)

    Stevens, Rick

    The SAE Linear Implementation Task Group has developed the SAE Linear Token Passing Multiplex Data Bus Standard (AS4074.1) and is currently working on a validation plan. This validation plan will define the test requirements for determining that an implementation of the standard meets the requirements of SAE AS4074.1. Once completed, the test requirements contained in this plan will be executed on bus interface units (BIUs) for validation purposes. In the present work, the author describes the use of a validation model that incorporates many of the capabilities of the validation test plan. This model can also be thought of as a VHDL (VHSIC Hardware Description Language) behavioral representation of the SAE Linear Token Passing Multiplex Data Bus Standard. It is tightly coupled to the standard and provides a model that can be used during the BIU development to validate the design.

  3. Risk factors affecting fatal bus accident severity: Their impact on different types of bus drivers.

    Science.gov (United States)

    Feng, Shumin; Li, Zhenning; Ci, Yusheng; Zhang, Guohui

    2016-01-01

    While the bus is generally considered to be a relatively safe means of transportation, the property losses and casualties caused by bus accidents, especially fatal ones, are far from negligible. The reasons for a driver to incur fatalities are different in each case, and it is essential to discover the underlying risk factors of bus fatality severity for different types of drivers in order to improve bus safety. The current study investigates the underlying risk factors of fatal bus accident severity to different types of drivers in the U.S. by estimating an ordered logistic model. Data for the analysis are retrieved from the Buses Involved in Fatal Accidents (BIFA) database from the USA for the years 2006-2010. Accidents are divided into three levels by counting their equivalent fatalities, and the drivers are classified into three clusters by the K-means cluster analysis. The analysis shows that some risk factors have the same impact on different types of drivers, they are: (a) season; (b) day of week; (c) time period; (d) number of vehicles involved; (e) land use; (f) manner of collision; (g) speed limit; (h) snow or ice surface condition; (i) school bus; (j) bus type and seating capacity; (k) driver's age; (l) driver's gender; (m) risky behaviors; and (n) restraint system. Results also show that some risk factors only have impact on the "young and elder drivers with history of traffic violations", they are: (a) section type; (b) number of lanes per direction; (c) roadway profile; (d) wet road surface; and (e) cyclist-bus accident. Notably, history of traffic violations has different impact on different types of bus drivers. PMID:26513334

  4. Design of E-City Bus Tracking System

    Directory of Open Access Journals (Sweden)

    Shekhar Shinde

    2014-04-01

    Full Text Available E-city bus tracking system will serve as a viable notification system that will effectively assist passengers in making the decision of whether to wait for the bus or not. This system is a standalone system designed to display the real-time location(s of the buses with the use of GSM module technology. The system will consist of an IR transmitter module installed on the buses, receiver boards installed on the bus stops and GSM receiver connected with PC monitoring the whole arrangement. It will also have passenger information system software installed at the bus stops and which will provide user the relevant information regarding all the bus numbers going for his source to destination along with the route details. It will also transmit its bus numbers and route names, with the help of LED transmitter, continuously as soon as the bus comes within the range of the receiver at the bus stop.

  5. The Bus Station Spacing Optimization Based on Game Theory

    Directory of Open Access Journals (Sweden)

    Changjiang Zheng

    2015-01-01

    Full Text Available With the development of city, the problem of traffic is becoming more and more serious. Developing public transportation has become the key to solving this problem in all countries. Based on the existing public transit network, how to improve the bus operation efficiency, and reduce the residents transit trip cost has become a simple and effective way to develop the public transportation. Bus stop spacing is an important factor affecting passengers’ travel time. How to set up bus stop spacing has become the key to reducing passengers’ travel time. According to comprehensive traffic survey, theoretical analysis, and summary of urban public transport characteristics, this paper analyzes the impact of bus stop spacing on passenger in-bus time cost and out-bus time cost and establishes in-bus time and out-bus time model. Finally, the paper gets the balance best station spacing by introducing the game theory.

  6. Secure Bus-Ticketing System using NFC

    Directory of Open Access Journals (Sweden)

    Monalisa Lopes

    2015-04-01

    Full Text Available For making the day to day life more convenient for the passengers travelling in bus some technologies can be used like Near Field Communication (NFC, Radio Frequency Identification (RFID. The proposed system is based on ticketing and identification of passengers in public transport. The system suggest a user friendly automated ticketing system which will automatically deduct the passengers fare according to the distance travelled as well as detect the passengers detail information. The system also helps to calculate the total revenue of a single bus in a day. Another important aspect is reusability, which helps use ticket multiple times as it is rechargeable.

  7. NOC AND BUS ARCHITECTURE: A COMPARISON

    Directory of Open Access Journals (Sweden)

    RAJEEV KAMAL

    2012-04-01

    Full Text Available Network-on-chip designs promise to offer considerable advantages over the traditional bus-based architecture. As continuing scaling of Moore’s law enables ever greater transistor densities, design complexity, power limitations and application convergence networks have started to replace busses in much smaller systems and the enhancement of NoC. This paper summarizes the advantages of the NoC and the limitations of traditional bus based architecture. In this paper we discuss a detailed comparison of area, power, scalability andperformance of traditional busses in comparison with NoC.

  8. An Efficient Segmental Bus-Invert Coding Method for Instruction Memory Data Bus Switching Reduction

    Directory of Open Access Journals (Sweden)

    Gu Ji

    2009-01-01

    Full Text Available Abstract This paper presents a bus coding methodology for the instruction memory data bus switching reduction. Compared to the existing state-of-the-art multiway partial bus-invert (MPBI coding which relies on data bit correlation, our approach is very effective in reducing the switching activity of the instruction data buses, since little bit correlation can be observed in the instruction data. Our experiments demonstrate that the proposed encoding can reduce up to 42% of switching activity, with an average of 30% reduction, while MPBI achieves just 17.6% reduction in switching activity.

  9. Air quality on bus routes in Umea, Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Sandberg, H.; Forsberg, B. [Dept. of Environmental Health and Dept. of Public Health and Clinical Medicine, Umea University SE, Umea (Sweden)

    2000-07-01

    Bus traffic in some local streets with up to 650 buses per day has resulted in complaints about air pollution and suggestions from residents that the bus routes should be changed to other streets. We have studied nitrogen dioxide and benzene concentrations at five exposed sites and at two representative control sites without bus traffic, and found no general differences in air quality. However, the site and temperature adjusted concentrations fell significantly during a strike among bus drivers. (authors)

  10. Framework for Bus Rapid Transit Development and Deployment Planning

    OpenAIRE

    Miller, Mark A.; Yin, Yafeng; Balvanyos, Tunde; Ceder, Avishai

    2004-01-01

    This report presents the results of its investigation into deployment planning for bus rapid transit systems. In this study, we conducted a macro-scale examination of bus rapid transit systems from technical, operational, institutional, and planning perspectives. We then developed the theoretical foundation for a deployment planning framework for bus rapid transit systems that specifically takes into account the unique features of bus rapid transit that differ from other transit alternatives....

  11. Bus Stops, This shapefile contains existing bus stops for Charlotte Area Transit System, Published in 2006, Charlotte Area Transit System.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Bus Stops dataset, was produced all or in part from Field Survey/GPS information as of 2006. It is described as 'This shapefile contains existing bus stops for...

  12. Peptic ulcer among urban bus drivers in Denmark

    DEFF Research Database (Denmark)

    Netterstrøm, Bo; Juel, K

    1990-01-01

    As part of a survey on the work environment of bus drivers, 2045 (83%) of 2465 male bus drivers in the three major cities in Denmark in 1978 answered a postal questionnaire on health and working conditions. In order to evaluate the relative occurrence of peptic ulcer among the bus drivers, a follow...

  13. An appraisal of QR code use to deliver bus arrival time information at bus stops in Southampton

    OpenAIRE

    Gammer, Nick

    2011-01-01

    The provision of at-stop bus arrival time information has numerous potential benefits to bus users. With real-time passenger information well established in the UK the challenge is relaying accurate bus arrival times to passengers in a cost effective manner. Display screens are costly to install and maintain, rendering placement at all bus stops economically undesirable. QR codes represent an inexpensive alternative to delivering this information, usually at zero marginal cost to users. Q...

  14. FUEL CELL BUS DEMONSTRATION IN MEXICO CITY

    Science.gov (United States)

    The report discusses the performance of a cull-size, zero-emission, Proton Exchange Membrane (PEM) fuel-cell-powered transit bus in the atmospheric environment of Mexico City. To address the air quality problems caused by vehicle emissions in Mexico City, a seminar on clean vehic...

  15. Inrush-Current Limiter And Bus Isolator

    Science.gov (United States)

    Dolland, Carlisle R.

    1994-01-01

    Electronic circuit protects electrical power bus and source of power against excessive current demands. Circuit intended for use with power-consuming electronic system drawing pulsed currents and including capacitor bank as low-impedance secondary source from which pulsed currents drawn.

  16. Repeater For A Digital-Communication Bus

    Science.gov (United States)

    Torres-Guzman, Esteban; Olson, Stephen; Heaps, Tim

    1993-01-01

    Digital repeater circuit designed to extend range of communication on MIL-STD-1553 bus beyond original maximum allowable length of 300 ft. Circuit provides two-way communication, one way at time, and conforms to specifications of MIL-STD-1553. Crosstalk and instability eliminated.

  17. Virginia School Bus Driver Training: Does Training Program Adequacy Affect school Bus Accident Rates?

    OpenAIRE

    Crews, James O

    1997-01-01

    Analysis of data provided by the Virginia Departments of Motor Vehicles, Transportation, and Education all show school buses as having a significantly higher number of accidents per hundred million miles of travel than other forms of transportation. Such statistics are alarming and formal study of school bus accident factors has been limited. The purposes of this study were to (a) establish the adequacy of the school bus driver training programs of Local Education Agencies(LEAs...

  18. Bus 54 -- Where are you? A school bus intelligent information system

    Energy Technology Data Exchange (ETDEWEB)

    Truett, L.F.; Moore, S.; Tonn, B. [Oak Ridge National Lab., TN (United States); Conley, T. [GTE Wireless, Nashville, TN (United States)

    1998-07-01

    Although major accidents involving school buses are rare (only about 0.3% of all fatal crashes since 1986 are classified as school-bus-related), even minor accidents and breakdowns cause a great deal of parental anxiety. The objective of this research is to design an efficient, cost-effective, accurate, and secure system that will track individual school buses and communicate appropriate information to the school system`s central administration unit, to the school transportation administrator, and to parents of children on the bus. The greatest benefit of the proposed information system is that parents and officials can always know the location and condition (these conditions would vary depending on the needs of a particular school system) of the school buses. In case of an accident or mechanical problem, when emergency crews are needed, they can be dispatched almost immediately with a good understanding of the problem and the exact location of the bus. In addition to being able to track the bus while the child is on board, parents will be able to determine the location of their child`s bus prior to its arrival in the morning in order to prevent the child from needing to wait outside in inclement weather. The information available to parents can also be expanded to include maps of limited routes (e.g., snow routes). Basically, the Bus 54 concept consists of a bus component and a central data processing unit. Each bus will be outfitted with a global positioning satellite (GPS) device, a wireless communication device, and wireless data communication service. The central data processing unit will receive and process information from the buses and provide information access to parents and officials via an Internet link.

  19. Advanced eGovernment Information Service Bus (eGov-Bus

    Directory of Open Access Journals (Sweden)

    2007-01-01

    Full Text Available The eGov-Bus project provides citizens and businesses with improved access to virtual public services, which are based on existing national eGovernment Web services and which support cross-border life events. Requirements and specific rules of these life events are considered, and personalization of user preferences is supported. eGov-Bus is based on adaptable process management technologies, allowing for virtual services which are dynamically combined from existing national eGovernment services. In this way, a comprehensive workflow process is set up, allowing for service-level agreements, an audit trail and explanation of the process to the end user. The eGov-Bus process engine operates on top of a virtual repository, providing a high-level semantic view of information retrieved from heterogeneous information sources, such as eGovernment Web services. Further, eGov-Bus relies on a security framework to ensure all high-level security requirements are met. The eGov-Bus architecture is business oriented, it focuses on Service Oriented Architecture (SOA concepts, asynchronously combining Web services and providing a Service Bus.

  20. Regenerative polymeric bus architecture for board-level optical interconnects.

    Science.gov (United States)

    Bamiedakis, N; Hashim, A; Penty, R V; White, I H

    2012-05-21

    A scalable multi-channel optical regenerative bus architecture based on the use of polymer waveguides is presented for the first time. The architecture offers high-speed interconnection between electrical cards allowing regenerative bus extension with multiple segments and therefore connection of an arbitrary number of cards onto the bus. In a proof-of-principle demonstration, a 4-channel 3-card polymeric bus module is designed and fabricated on standard FR4 substrates. Low insertion losses (≤ -15 dB) and low crosstalk values (bus modules using a prototype 3R regenerator.

  1. Heat Transfer in the LHC Main Superconducting Bus Bars

    CERN Document Server

    Granieri, P P; Richter, D

    2011-01-01

    CERN is performing a systematic analysis of the interconnecting bus bars of the Large Hadron Collider (LHC) main magnets. Their thermal, electrical, mechanical and hydraulic performances are addressed. In the frame of these studies, the heat transfer between the main superconducting (SC) bus bars and the surrounding He bath is investigated. It represents a key parameter in the comprehension of the bus bars stability and quench propagation mechanisms, thus crucial for the analysis of the 2008 incident which was triggered by a defective bus bars joint. This paper reports on the experimental tests and relative analysis aiming at describing the thermal behavior of the LHC main bus bars.

  2. Energy efficiency of different bus subsystems in Belgrade public transport

    Directory of Open Access Journals (Sweden)

    Mišanović Slobodan M.

    2015-01-01

    Full Text Available Research in this paper comprised experimental determination of energy efficiency of different bus subsystems (diesel bus, trolleybus and fully electric bus on chosen public transport route in Belgrade. Experimental measuring of energy efficiency of each bus type has been done based on the analysis of parameters of vehicle driving cycles between stops. Results of this analysis were basis for development of theoretical simulation model of energy efficiency. The model was latter compared with the results of simulation done by "Solaris bus & Coach" company for the chosen electric bus route. Based on demonstrated simulation, characteristics of electric bus batteries were defined, the method and dynamic of their recharge was suggested, as well as choice for other aggregates for drive system and technical characteristics for the electric buses were suggested.

  3. Exposure Assessment of Diesel Bus Emissions

    Directory of Open Access Journals (Sweden)

    Werner Hofmann

    2006-12-01

    Full Text Available The goal of this study was to measure ultrafine particle concentrations with diameters less than 1 μm emitted by diesel buses and to assess resulting human exposure levels. The study was conducted at the Woolloongabba Busway station in Brisbane, Australia in the winter months of 2002 during which temperature inversions frequently occurred. Most buses that utilize the station are fuelled by diesel, the exhaust of which contains a significant quantity of particle matter. Passengers waiting at the station are exposed to these particles emitted from the buses. During the course of this study, passenger census was conducted, based on video surveillance, yielding person-by-person waiting time data. Furthermore, a bus census revealed accurate information about the total number of diesel versus Compressed Natural Gas (CNG powered buses. Background (outside of the bus station and platform measurements of ultrafine particulate number size distributions were made to determine ambient aerosol concentrations. Particle number exposure concentration ranges from 10 and 40 to 60% of bus related exhaust fumes. This changes dramatically when considering the particle mass exposure concentration, where most passengers are exposed to about 50 to 80% of exhaust fumes. The obtained data can be very significant for comparison with similar work of this type because it is shown in previous studies that exhaust emissions causes cancer in laboratory animals. It was assumed that significant differences between platform and background distributions were due to bus emissions which, combined with passenger waiting times, yielded an estimate of passenger exposure to ultrafine particles from diesel buses. From an exposure point of view, the Busway station analyzed resembles a street canyon. Although the detected exhaust particle concentration at the outbound platform is found to be in the picogram range, exposure increases with the time passengers spend on the platform

  4. Brazilian hybrid electric fuel cell bus

    Energy Technology Data Exchange (ETDEWEB)

    Miranda, P.E.V.; Carreira, E.S. [Coppe-Federal Univ. of Rio de Janeiro (Brazil). Hydrogen Lab.

    2010-07-01

    The first prototype of a hybrid electric fuel cell bus developed with Brazilian technology is unveiled. It is a 12 m urban-type, low-floor, air-conditioned bus that possesses three doors, air suspension, 29 seats and reversible wheelchair site. The bus body was built based on a double-deck type monoblock vehicle that is able to sustain important load on its roof. This allowed positioning of the type 3 hydrogen tanks and the low weight traction batteries on the roof of the vehicles without dynamic stabilization problems. A novel hybrid energy configuration was designed in such a way that the low-power (77 kWe) fuel cell works on steady-state operation mode, not responding directly to the traction motor load demand. The rate of kinetic energy regeneration upon breaking was optimized by the use of an electric hybrid system with predominance of batteries and also by utilizing supercapacitors. The electric-electronic devices and the security control softwares for the auxiliary and traction systems were developed in-house. The innovative hybrid-electric traction system configuration led to the possibility to decrease the fuel cell power, with positive impact on weight and system volume reduction, as well as to significantly decrease the hydrogen consumption. (orig.)

  5. Bayes and empirical Bayes: do they merge?

    CERN Document Server

    Petrone, Sonia; Scricciolo, Catia

    2012-01-01

    Bayesian inference is attractive for its coherence and good frequentist properties. However, it is a common experience that eliciting a honest prior may be difficult and, in practice, people often take an {\\em empirical Bayes} approach, plugging empirical estimates of the prior hyperparameters into the posterior distribution. Even if not rigorously justified, the underlying idea is that, when the sample size is large, empirical Bayes leads to "similar" inferential answers. Yet, precise mathematical results seem to be missing. In this work, we give a more rigorous justification in terms of merging of Bayes and empirical Bayes posterior distributions. We consider two notions of merging: Bayesian weak merging and frequentist merging in total variation. Since weak merging is related to consistency, we provide sufficient conditions for consistency of empirical Bayes posteriors. Also, we show that, under regularity conditions, the empirical Bayes procedure asymptotically selects the value of the hyperparameter for ...

  6. Study of bus driving parameters on urban route

    OpenAIRE

    Fuad DASHDAMIROV

    2011-01-01

    The article deals with bus traffic time and speed on stage and route in the whole. The factors affecting bus driving parameters are divided into groups. The factors of significant impact are found in each group. The method of consideration of such factors impact on driving parameters in timetable making, is proposed. The extent of impact of selected factors on bus driving time and speed is studied.

  7. The SMART MIL-STD-1553 bus adapter hardware manual

    Science.gov (United States)

    Ton, T. T.

    1981-01-01

    The SMART Multiplexer Interface Adapter, (SMIA) a complete system interface for message structure of the MIL-STD-1553, is described. It provides buffering and storage for transmitted and received data and handles all the necessary handshaking to interface between parallel 8-bit data bus and a MIL-STD serial bit stream. The bus adapter is configured as either a bus controller of a remote terminal interface. It is coupled directly to the multiplex bus, or stub coupled through an additional isolation transformer located at the connection point. Fault isolation resistors provide short circuit protection.

  8. Examination of an Urban City Bus Operating Conditions and Emissions

    OpenAIRE

    Soylu, Seref (Coordinador); Bal, Ayda; Semercioglu, Hulya; Ay, Eyup Fatih

    2010-01-01

    It was observed that real world driving characteristics of the city bus don’t correlate well with that of the ETC, which is the certification cycle for the city bus engines. For this reason it is not realistic to expect emission levels lower than corresponding EURO standards from the city bus during real world driving. City bus NOx emissions in terms of grams per second are increasing with engine load and speed but the total NOx emissions for entire trip are the maximum at the locations whe...

  9. Multi-Gigabit Rate Radiation Hard Bus Project

    Data.gov (United States)

    National Aeronautics and Space Administration — High speed robust very low power radiation hardened bus interconnects are required to accelerate on-board computations, further improve reconfigurability and...

  10. Bus accident severity and passenger injury: evidence from Denmark

    DEFF Research Database (Denmark)

    Prato, Carlo Giacomo; Kaplan, Sigal

    2014-01-01

    light. Occurrence of injury to bus passengers is positively related to (i) the involvement of heavy vehicles, (ii) crossing intersections in yellow or red light, (iii) open areas, (iv) high speed limits, and (v) slippery road surface. Conclusions The findings of the current study provide a comprehensive...... examining occurrence of injury to bus passengers. Results Bus accident severity is positively related to (i) the involvement of vulnerable road users, (ii) high speed limits, (iii) night hours, (iv) elderly drivers of the third party involved, and (v) bus drivers and other drivers crossing in yellow or red...

  11. Status of the IEEE P896 Future Backplane Bus

    International Nuclear Information System (INIS)

    The IEEE P896 Future Backplane Bus project has been influenced by and has influenced FASTBUS and several other contemporary bus designs. This paper summarizes the current status of that project, which is directed toward the needs of modern 32-bit microprocessor systems with multiple processors. Some of the technology developed for P896 will be important for future non-ECL implementations of FASTBUS and other buses. In particular, new bus drivers and receivers should greatly improve the performance and reliability of backplane buses and cable buses. The current status of the P896 serial bus is also summarized

  12. San Diego Bay Bibliography

    OpenAIRE

    Brueggeman, Peter

    1994-01-01

    The San Diego Bay Bibliography references the scientific & gray literature on the Bay up through 1994 and it is NOT current. Compiled from numerous resources (including Hubbs-Sea World Research Institute, Regional Water Quality Control Board, & local library catalogs), it is not comprehensive since so the Bay literature is elusive. In addition, there can be duplicate references varying in completeness. The San Diego Bay Bibliography is the outcome of discussion and networking within ...

  13. Oracle Service Bus 11g Development Cookbook

    CERN Document Server

    Schmutz, Guido; van Zoggel, Jan

    2012-01-01

    This cookbook is full of immediately useable recipes showing you how to develop service and message-oriented (integration) applications on the Oracle Service Bus. In addition to its cookbook style, which ensures the solutions are presented in a clear step-by-step manner, the explanations go into great detail, which makes it good learning material for everyone who has experience in OSB and wants to improve. Most of the recipes are designed in such a way that each recipe is presented as a separate, standalone entity and reading of prior recipes is not required. The finished solution of each reci

  14. Bus bar joints stability and protection

    CERN Document Server

    Verweij, A

    2009-01-01

    A defective bus connection between two dipole magnets was the primary cause of the incident in sector 34 on September 19th. I will show how this could have happened, i.e. how a highly resistive joint has caused a thermal runaway and burned (or opened) before the QPS threshold was reached. In the second part of the talk I will present the new detection limits for the QPS upgrade of the RB and RQ circuits, required to avoid similar thermal runaways in the future.

  15. Redesign of Transjakarta Bus Driver's Cabin

    Science.gov (United States)

    Mardi Safitri, Dian; Azmi, Nora; Singh, Gurbinder; Astuti, Pudji

    2016-02-01

    Ergonomic risk at work stations with type Seated Work Control was one of the problems faced by Transjakarta bus driver. Currently “Trisakti” type bus, one type of bus that is used by Transjakarta in corridor 9, serving route Pinang Ranti - Pluit, gained many complaints from drivers. From the results of Nordic Body Map questionnaires given to 30 drivers, it was known that drivers feel pain in the neck, arms, hips, and buttocks. Allegedly this was due to the seat position and the button/panel bus has a considerable distance range (1 meter) to be achieved by drivers. In addition, preliminary results of the questionnaire using Workstation Checklist identified their complaints about uncomfortable cushion, driver's seat backrest, and the exact position of the AC is above the driver head. To reduce the risk level of ergonomics, then did research to design the cabin by using a generic approach to designing products. The risk analysis driver posture before the design was done by using Rapid Upper Limb Assessment (RULA), Rapid Entire Body Assessment (REBA), and Quick Exposure Checklist (QEC), while the calculation of the moment the body is done by using software Mannequin Pro V10.2. Furthermore, the design of generic products was done through the stages: need metric-matrix, house of quality, anthropometric data collection, classification tree concept, concept screening, scoring concept, design and manufacture of products in the form of two-dimensional. While the design after design risk analysis driver posture was done by using RULA, REBA, and calculation of moments body as well as the design visualized using software 3DMax. From the results of analysis before the draft design improvements cabin RULA obtained scores of 6, REBA 9, and the result amounted to 57.38% QEC and moment forces on the back is 247.3 LbF.inch and on the right hip is 72.9 LbF.in. While the results of the proposed improvements cabin design RULA obtained scores of 3, REBA 4, and the moment of force on

  16. Network Extender for MIL-STD-1553 Bus

    Science.gov (United States)

    Marcus, Julius; Hanson, T. David

    2003-01-01

    An extender system for MIL-STD-1553 buses transparently couples bus components at multiple developer sites. The bus network extender is a relatively inexpensive system that minimizes the time and cost of integration of avionic systems by providing a convenient mechanism for early testing without the need to transport the usual test equipment and personnel to an integration facility. This bus network extender can thus alleviate overloading of the test facility while enabling the detection of interface problems that can occur during the integration of avionic systems. With this bus extender in place, developers can correct and adjust their own hardware and software before products leave a development site. Currently resident at Johnson Space Center, the bus network extender is used to test the functionality of equipment that, although remotely located, is connected through a MILSTD- 1553 bus. Inasmuch as the standard bus protocol for avionic equipment is that of MIL-STD-1553, companies that supply MIL-STD-1553-compliant equipment to government or industry and that need long-distance communication support might benefit from this network bus extender

  17. A High Efficiency DC Bus Regulator / RPC for Spacecraft Applications

    Science.gov (United States)

    Birchenough, Arthur G.

    2004-02-01

    DC bus voltage regulation may be required in future high powered spacecraft due to the length of the busses or because they are not generated at precise voltage levels. In these cases the regulation range is often only a few percent increase or decrease, but conventional DC voltage regulators switch all the power passing through them, and this level of power switched determines the size and losses in the regulator. A recently developed concept uses a low power DC-DC converter in series with the bus to raise or lower the bus voltage over a small range. This partial power processing technique combines the small size and power losses of the low power converter with the ability to regulate, (over a small range) a high power bus. The Series Connected Buck Boost Regulator (SCBBR) described herein provides bus regulation with an efficiency of 98%. The circuit also provides bus switching and overcurrent limiting functions of a Remote Power Controller (RPC). This paper describes the circuit design and performance of a breadboard SCBBR configured as a bus voltage regulator providing +/- 40% voltage regulation range, bus switching, and overload limiting.

  18. Connecticut Transit (CTTRANSIT) Fuel Cell Transit Bus: Preliminary Evaluation Results

    Energy Technology Data Exchange (ETDEWEB)

    Chandler, K.; Eudy, L.

    2008-10-01

    This report provides preliminary results from a National Renewable Energy Laboratory evaluation of a protoptye fuel cell transit bus operating at Connecticut Transit in Hartford. Included are descriptions of the planned fuel cell bus demonstration and equipment; early results and agency experience are also provided.

  19. Network Analysis of Urban Traffic with Big Bus Data

    CERN Document Server

    Zhao, Kai

    2016-01-01

    Urban traffic analysis is crucial for traffic forecasting systems, urban planning and, more recently, various mobile and network applications. In this paper, we analyse urban traffic with network and statistical methods. Our analysis is based on one big bus dataset containing 45 million bus arrival samples in Helsinki. We mainly address following questions: 1. How can we identify the areas that cause most of the traffic in the city? 2. Why there is a urban traffic? Is bus traffic a key cause of the urban traffic? 3. How can we improve the urban traffic systems? To answer these questions, first, the betweenness is used to identify the most import areas that cause most traffics. Second, we find that bus traffic is not an important cause of urban traffic using statistical methods. We differentiate the urban traffic and the bus traffic in a city. We use bus delay as an identification of the urban traffic, and the number of bus as an identification of the bus traffic. Third, we give our solutions on how to improve...

  20. Review of bus drivers' occupational stress and stress prevention

    NARCIS (Netherlands)

    Kompier, M.A.J.; Di Martino, V.

    1995-01-01

    Although heterogeneous in methodology and content, 32 studies from 13 countries on bus drivers' work and health are similar in their conclusions. Bus-driving–characterized by high demands, low control and low support – can be regarded as a classic example of high-strain occupation, with high risks o

  1. Djungle power. A more remote AC bus

    Energy Technology Data Exchange (ETDEWEB)

    Boehnke, Heinz W. [Technosol, Jork (Germany)

    2010-07-01

    The Dzanga-Sangha Reserve in the Central African Republic is probably one of the world's most remote protected rainforest areas, much to the benefit of the rare species of lowland gorilla, forest elephant and local pygmy population Ba'Aka. The park is co-managed by the ''WWF-World Wide Fund for Nature'' with sponsoring from the German Regenwald-Stiftung. In 2008 wwf decided to switch from the old, failing generator supply to a solar hybrid mini-grid, along with stringent measures of energy conservation and management. After a careful energy audit Technosol designed an AC-bus system with a 22 kWp PV generator which should overcome the dependency on the old generators and their fuel demands. For 15 buildings, an entirely new distribution network was installed, state of the art energy saving devices introduced and an energy metering system deviced. The installation is operating since August 2009. In such remote locations, the reliability of the AC-bus over other generator-based solutions will be demonstrated and with the support of international organisations like the wwf the practical application of solar hybrid supply becomes a landmark of sustainable energy concepts. (orig.)

  2. An Overview of Staged-bus Operation in Cities

    Directory of Open Access Journals (Sweden)

    Mohammad Hesam Hafezi

    2014-02-01

    Full Text Available In developing countries, demand for passenger travel is higher, due to economic growth. Government policy encourages people to use public transportation instead of their private carsto reduce of traffic congestion and air pollution. In the city areas, bus networks are the major part of the public transportation system because they are easily accessible and cheaper compared to other types of public transportation. In this study revelation of details of bus operation included different agents is studied. Bus operations, during provision of their service, have interaction with three main agents: bus agent, passenger agent and traffic agent. Study of the influence of each agent in bus operation is presented in this study, using the macroscopic way.

  3. Research on the Coordinated Design of Bus and Taxi Station

    Directory of Open Access Journals (Sweden)

    Jiangfeng Xi

    2015-01-01

    Full Text Available Rises in the number of transit buses, bus routes, and overall traffic volume in China’s cities, coupled with interference from other transport modes, such as taxis loading and unloading passengers nearby, have led to increasing traffic delays at bus stops, which is considered one of the factors degrading service levels and traffic operations on urban roadways. This paper studies traffic characteristics at bus stops, investigates variations in delay from different types or designs of bus stops, and analyzes the impact of it on traffic capacity, the purpose of which is to propose a solution to predicting the feasibility of an integrated design of bus stops and taxi stands with the help of mathematical models and based on the objectives of optimal traffic operations and passenger transfer.

  4. Improved design of HIRFL-CSR EVME bus controller

    International Nuclear Information System (INIS)

    The EVME bus controller which is a key component of the HIRFL-CSR control system was improved. Besides reconfiguring the embedded Linux, a utility program was developed for data exchange between the controller and the database. The bus controller is based on ARM920T(ARM9) micro processor which is BGA packaged. The bus controller has the universal interface of VGA display, keyboard, and mouse. The backboard interface logic is programmed in an in-system configurable FPGA device. The bus can drive high current up to 64 mA, with the flexibility of the programmable signal definitions. All the improved performance helped the EVME bus controller play a crucial role in HIRFL-CSR control system. (authors)

  5. Low back trouble among urban bus drivers in Denmark

    DEFF Research Database (Denmark)

    Netterstrøm, Bo; Juel, K

    1989-01-01

    The occurrence of low back trouble and possible connection with psychosocial conditions among urban bus drivers were studied using a questionnaire and subsequent registration of hospital discharges. 2,045 (83%) full-time male bus drivers in the three largest cities in Denmark answered a questionn......The occurrence of low back trouble and possible connection with psychosocial conditions among urban bus drivers were studied using a questionnaire and subsequent registration of hospital discharges. 2,045 (83%) full-time male bus drivers in the three largest cities in Denmark answered...... a questionnaire in 1978 regarding psychosocial factors and health. The prevalence of frequent low back pain was 57%. In a control group of 195 motormen the prevalence was 40%. Standardized Morbidity Ratio for bus drivers discharged from hospital during the period 1978-1984 with the diagnosis lumbar disc...

  6. The wheels on the bus go "buy buy buy": school bus advertising laws.

    Science.gov (United States)

    Pomeranz, Jennifer L

    2012-09-01

    School buses, a practical necessity for millions of children, are at the center of new efforts to raise revenue. School bus advertising laws bring public health and commercialization concerns to the school setting. In doing so, they potentially expose school districts to First Amendment lawsuits. I examined various school bus advertising bills and laws. I reviewed First Amendment "forum analysis" as applied in the transit and school settings to clarify how this legal test may affect school districts subject to such laws. I have made recommendations for school districts to enact appropriate policies to ensure that such advertising does not undermine public health and to enable the districts to maintain control over their property.

  7. Bus bar electrical feedthrough for electrorefiner system

    Science.gov (United States)

    Williamson, Mark; Wiedmeyer, Stanley G; Willit, James L; Barnes, Laurel A; Blaskovitz, Robert J

    2013-12-03

    A bus bar electrical feedthrough for an electrorefiner system may include a retaining plate, electrical isolator, and/or contact block. The retaining plate may include a central opening. The electrical isolator may include a top portion, a base portion, and a slot extending through the top and base portions. The top portion of the electrical isolator may be configured to extend through the central opening of the retaining plate. The contact block may include an upper section, a lower section, and a ridge separating the upper and lower sections. The upper section of the contact block may be configured to extend through the slot of the electrical isolator and the central opening of the retaining plate. Accordingly, relatively high electrical currents may be transferred into a glovebox or hot-cell facility at a relatively low cost and higher amperage capacity without sacrificing atmosphere integrity.

  8. Swisstrolley 3 - An articulated trolley bus; SWISSTROLLEY 3. Gelenktrolleybus

    Energy Technology Data Exchange (ETDEWEB)

    Gisler, H.-J.

    2006-07-01

    This illustrated final report for the Swiss Federal Office of Energy (SFOE) takes a look at the Swisstrolley 3 low-floor, articulated trolley bus developed in Switzerland by the Hess AG company. Various features of the variants of the trolley bus, including single vehicle, single and double-articulated buses and bus trailers, are discussed. The reductions achieved in energy consumption, weight and noise are discussed. Typical values for power consumption are presented in graphical form. Economic viability and passenger-friendliness are examined, as are possibilities for further improvement.

  9. Statistical Analysis for the Driving Cycle of Beijing's Bus

    Institute of Scientific and Technical Information of China (English)

    王震坡; 孙逢春; 王军; 孙立清

    2004-01-01

    According to the test data of the driving model for Beijing's bus routes, 9 parameters and the actual values of Beijing bus are confirmed to evaluate the driving cycle, 2 ways of establishing driving cycle model are analyzed, the formula of calculating driving cycle is acquired, and the calculating driving cycle model and the statistical driving cycle model for the buses in Beijing urban areas are set up. This study provides scientific basis for selecting the bus type and confirming the design parameters and the running method in Beijing.

  10. Development in Conducting Bus of RE-Al Alloys

    Institute of Scientific and Technical Information of China (English)

    李德富; 胡捷; 章萍芝; 石瑛; 李彦利

    2001-01-01

    Four kinds of deformed aluminum alloys were tested. One kind of RE-A1-Mg-Si alloy, which possessed high conductivity and strength, was the first priority by contrast test, The large specification bus of conducting aluminum all oys was made by thermomechanical process during the industrial experiment. The properties of the bus are as follows:the tensile strength σb is 238 MPa, the conductivity (v.s. IACS) is 54.3%, and the current-carrying capacity is beyond 3.1kA during working process. This kind of RE-Al alloy bus has been applied to several electrical transmitting and transforming work.

  11. A new MV bus transfer scheme for nuclear power plants

    Directory of Open Access Journals (Sweden)

    Chang Choong-Koo

    2015-01-01

    Full Text Available Fast bus transfer method is the most popular and residual voltage transfer method that is used as a backup in medium voltage buses in general. The use of the advanced technology like open circuit voltage prediction and digital signal processing algorithms can improve the reliability of fast transfer scheme. However, according to the survey results of the recent operation records in nuclear power plants, there were many instances where the fast transfer scheme has failed. To assure bus transfer in any conditions and circumstances, uninterruptible bus transfer scheme utilizing the state of the art medium voltage UPS is discussed and elaborated.

  12. Tampa Bay: Chapter N

    Science.gov (United States)

    Handley, Larry; Spear, Kathryn; Cross, Lindsay; Baumstark, René; Moyer, Ryan; Thatcher, Cindy

    2013-01-01

    Tampa Bay is Florida’s largest open-water estuary and encompasses an area of approximately 1036 km2 (400 mi2) (Burgan and Engle, 2006; TBNEP, 2006). The Bay’s watershed drains 5,698 km2 (2,200 mi2) of land and includes freshwater from the Hillsborough River to the north east, the Alafia and Little Manatee rivers to the east, and the Manatee River to the south (Figure 1). Freshwater inflow also enters the bay from the Lake Tarpon Canal, from small tidal tributaries, and from watershed runoff. Outflow travels from the upper bay segments (Hillsborough Bay and Old Tampa Bay) into Middle and Lower Tampa Bay. Southwestern portions of the water shed flow through Boca Ciega Bay into the Intracoastal Waterway and through the Southwest Channel and Passage Key Inlet into the Gulf of Mexico. The average depth in most of Tampa Bay is only 3.4 m (11 ft); however, 129 km (80 mi) of shipping channels with a maximum depth of 13.1 m (43 ft) have been dredged over time and are regularly maintained. These channels help to support the three ports within the bay, as well as commercial and recreational boat traffic.

  13. Common Traffic Violations of Bus Drivers in Urban China: An Observational Study

    OpenAIRE

    Qiqi Wang; , Wei Zhang; Rendong Yang; Yuanxiu Huang; Lin Zhang; Peishan Ning; Xunjie Cheng; Schwebel, David C; Guoqing Hu; Hongyan Yao

    2015-01-01

    Objective To report common traffic violations in bus drivers and the factors that influence those violations in urban China. Methods We conducted an observational study to record three types of traffic violations among bus drivers in Changsha City, China: illegal stopping at bus stations, violating traffic light signals, and distracted driving. The behaviors of bus drivers on 32 routes (20% of bus routes in the city) were observed. A two-level Poisson regression examined factors that predicte...

  14. Rfid-Based Automatic Bus Ticketing: Features and Trends

    Science.gov (United States)

    Oudah, A.

    2016-02-01

    Recent advancements in various technologies have made remarkable developments in various fields for public welfare and public transport is one such area. In the near future public bus transport system with advanced technologies like Radio Frequency Identification Device (RFID), GSM, GPS, ZigBee and RF modules will gain spotlight due to their advantage of higher convenience and greater life standards as compared to the conventional bus systems. In this paper, a comprehensive review of all several proposed bus ticketing and bus information methods has been presented in detail. The study brings out improved solution in terms of cost, convenience, user satisfaction and future implementation. The choice of working modules and their efficient performance has been discussed along with the highlighted importance of the need of technology for welfare of common public and visually impaired.

  15. Constant of heat conduction and stabilization of bus bar conductor

    Science.gov (United States)

    López, G.

    Using the one-dimensional, time-independent conduction state, a constant of heat conduction is given bringing about the known stabilization theorem and a closed expression for the bus bar to be cryogenically stable in superconducting accelerators.

  16. Black silicon solar cells with black bus-bar strings

    DEFF Research Database (Denmark)

    Davidsen, Rasmus Schmidt; Tang, Peter Torben; Mizushima, Io;

    2016-01-01

    We present the combination of black silicon texturing and blackened bus-bar strings as a potential method for obtaining all-black solar panels, while using conventional, front-contacted solar cells. Black silicon was realized by maskless reactive ion etching resulting in total, average reflectance...... below 0.5% across a 156x156 mm2 silicon wafer. Four different methods to obtain blackened bus-bar strings were compared with respect to reflectance, and two of these methods (i.e., oxidized copper and etched solder) were used to fabricate functional allblack solar 9-cell panels. The black bus-bars (e.......g., by oxidized copper) have a reflectance below 3% in the entire visible wavelength range. The combination of black silicon cells and blackened bus-bars results in aesthetic, all-black panels based on conventional, front-contacted solar cells without compromising efficiency....

  17. Optimization Model for Headway of a Suburban Bus Route

    Directory of Open Access Journals (Sweden)

    Xiaohong Jiang

    2014-01-01

    Full Text Available Due to relatively low passenger demand, headways of suburban bus route are usually longer than those of urban bus route. Actually it is also difficult to balance the benefits between passengers and operators, subject to the service standards from the government. Hence the headway of a suburban bus route is usually determined on the empirical experience of transport planners. To cope with this problem, this paper proposes an optimization model for designing the headways of suburban bus routes by minimizing the operating and user costs. The user costs take into account both the waiting time cost and the crowding cost. The feasibility and validity of the proposed model are shown by applying it to the Route 206 in Jiangning district, Nanjing city of China. Weightages of passengers’ cost and operating cost are further discussed, considering different passenger flows. It is found that the headway and objective function are affected by the weightages largely.

  18. Optimal control system of the intermittent bus-only approach

    Institute of Scientific and Technical Information of China (English)

    Jie Jiang; Yulin Chang

    2014-01-01

    To guarantee bus priority with a minimum impact on car traffic at intersections, an optimal control system of the intermittent bus-only approach (IBA) was proposed. The problems of the existing system are first solved through optimization: the judgment time of the IBA system was advanced to allow a bus to jump car queues if the bus was detected to arrive at the intersection, and the instant that the IBA lane became available to cars was controlled dynamically to increase the capacity of the IBA lane. The total car delay in one cycle was then analyzed quantitatively when implementing the optimal control system. The results show that in comparison with the existing system of the IBA, the car delay is greatly reduced and the probability of a car stopping twice is low after optimizing the IBA system.

  19. Study on the Bus Real-time Dispatching Model

    Institute of Scientific and Technical Information of China (English)

    YingZou; JianguoLi; JianhuaHuang; ZhenminTang

    2004-01-01

    The real-time dispatching model on bus system is studied in this article. Realtime dispatching can resume the planned schedule quickly, and then to ensure the reliability of the public transport service and to well raise the service quality.

  20. Global Optimization for Bus Line Timetable Setting Problem

    Directory of Open Access Journals (Sweden)

    Qun Chen

    2014-01-01

    Full Text Available This paper defines bus timetables setting problem during each time period divided in terms of passenger flow intensity; it is supposed that passengers evenly arrive and bus runs are set evenly; the problem is to determine bus runs assignment in each time period to minimize the total waiting time of passengers on platforms if the number of the total runs is known. For such a multistage decision problem, this paper designed a dynamic programming algorithm to solve it. Global optimization procedures using dynamic programming are developed. A numerical example about bus runs assignment optimization of a single line is given to demonstrate the efficiency of the proposed methodology, showing that optimizing buses’ departure time using dynamic programming can save computational time and find the global optimal solution.

  1. Bus Passenger Recognition and Track of Video Sequence

    Directory of Open Access Journals (Sweden)

    Donghua Zhou

    2013-06-01

    Full Text Available Study on bus passenger recognition and track of video sequence is a research aiming at realizing making a statistics on passenger flow volume of bus, which not only helps traffic services center rationally schedule vehicles, but also can avoid overload. The system makes machine vision technology and digital image processing technique applied in customer counting of bus. The key questions in the study include effective collection of video image, effective extraction of moving object in sequence images, recognition of moving targets, trace and count of moving objects. The paper makes deep analysis on relevant technology from the perspective of the theory and practical application of the algorithm, and the study makes achievements. The theoretical algorithm for the study on bus passenger recognition and track of video sequence is distinctive. The practical experiments indicate that the system can satisfy the real-time requirements, and can accurately make statistics on the number of passengers, which has great application value.

  2. Examining the Optimal Fuel Type for Urban Bus Operations

    OpenAIRE

    CAULFIELD, BRIAN

    2010-01-01

    PUBLISHED Washington D.C. Public service fleets offer an attractive option for introducing renewable fuels and alternative technologies on a large scale, which allow for the reduction of both greenhouse gas emissions and exhaust air pollutants. This paper ex amines the use of biomethane (bio-CNG) and compressed natural gas (CNG) for part of the bus fleet in Dublin. Dublin is typical of many international urban centres with a large bus fleet; therefore the results...

  3. Compressed natural gas bus safety: a quantitative risk assessment.

    Science.gov (United States)

    Chamberlain, Samuel; Modarres, Mohammad

    2005-04-01

    This study assesses the fire safety risks associated with compressed natural gas (CNG) vehicle systems, comprising primarily a typical school bus and supporting fuel infrastructure. The study determines the sensitivity of the results to variations in component failure rates and consequences of fire events. The components and subsystems that contribute most to fire safety risk are determined. Finally, the results are compared to fire risks of the present generation of diesel-fueled school buses. Direct computation of the safety risks associated with diesel-powered vehicles is possible because these are mature technologies for which historical performance data are available. Because of limited experience, fatal accident data for CNG bus fleets are minimal. Therefore, this study uses the probabilistic risk assessment (PRA) approach to model and predict fire safety risk of CNG buses. Generic failure data, engineering judgments, and assumptions are used in this study. This study predicts the mean fire fatality risk for typical CNG buses as approximately 0.23 fatalities per 100-million miles for all people involved, including bus passengers. The study estimates mean values of 0.16 fatalities per 100-million miles for bus passengers only. Based on historical data, diesel school bus mean fire fatality risk is 0.091 and 0.0007 per 100-million miles for all people and bus passengers, respectively. One can therefore conclude that CNG buses are more prone to fire fatality risk by 2.5 times that of diesel buses, with the bus passengers being more at risk by over two orders of magnitude. The study estimates a mean fire risk frequency of 2.2 x 10(-5) fatalities/bus per year. The 5% and 95% uncertainty bounds are 9.1 x 10(-6) and 4.0 x 10(-5), respectively. The risk result was found to be affected most by failure rates of pressure relief valves, CNG cylinders, and fuel piping.

  4. Bus Implementation Using New Low Power PFSCL Tristate Buffers

    OpenAIRE

    Neeta Pandey; Bharat Choudhary; Kirti Gupta; Ankit Mittal

    2016-01-01

    This paper proposes new positive feedback source coupled logic (PFSCL) tristate buffers suited to bus applications. The proposed buffers use switch to attain high impedance state and modify the load or the current source section. An interesting consequence of this is overall reduction in the power consumption. The proposed tristate buffers consume half the power compared to the available switch based counterpart. The issues with available PFSCL tristate buffers based bus implementation are id...

  5. eBay.com

    DEFF Research Database (Denmark)

    Engholm, Ida

    2014-01-01

    Celebrated as one of the leading and most valuable brands in the world, eBay has acquired iconic status on par with century-old brands such as Coca-Cola and Disney. The eBay logo is now synonymous with the world’s leading online auction website, and its design is associated with the company’s...

  6. DIMETHYL ETHER (DME)-FUELED SHUTTLE BUS DEMONSTRATION PROJECT

    Energy Technology Data Exchange (ETDEWEB)

    Elana M. Chapman; Shirish Bhide; Jennifer Stefanik; Howard Glunt; Andre L. Boehman; Allen Homan; David Klinikowski

    2003-04-01

    The objectives of this research and demonstration program are to convert a campus shuttle bus to operation on dimethyl ether, a potential ultra-clean alternative diesel fuel. To accomplish this objective, this project includes laboratory evaluation of a fuel conversion strategy, as well as, field demonstration of the DME-fueled shuttle bus. Since DME is a fuel with no lubricity (i.e., it does not possess the lubricating quality of diesel fuel), conventional fuel delivery and fuel injection systems are not compatible with dimethyl ether. Therefore, to operate a diesel engine on DME one must develop a fuel-tolerant injection system, or find a way to provide the necessary lubricity to the DME. In this project, they have chosen the latter strategy in order to achieve the objective with minimal need to modify the engine. Their strategy is to blend DME with diesel fuel, to obtain the necessary lubricity to protect the fuel injection system and to achieve low emissions. The bulk of the efforts over the past year were focused on the conversion of the campus shuttle bus. This process, started in August 2001, took until April 2002 to complete. The process culminated in an event to celebrate the launching of the shuttle bus on DME-diesel operation on April 19, 2002. The design of the system on the shuttle bus was patterned after the system developed in the engine laboratory, but also was subjected to a rigorous failure modes effects analysis (FMEA, referred to by Air Products as a ''HAZOP'' analysis) with help from Dr. James Hansel of Air Products. The result of this FMEA was the addition of layers of redundancy and over-pressure protection to the system on the shuttle bus. The system became operational in February 2002. Preliminary emissions tests and basic operation of the shuttle bus took place at the Pennsylvania Transportation Institute's test track facility near the University Park airport. After modification and optimization of the system on

  7. CROSS-FRONTIER PUBLIC TRANSPORT: Y BUS

    CERN Document Server

    CERN Housing Service

    2002-01-01

    'Y' buses cover the journey between Val Thoiry in France (shopping centre including'Migros' and other stores) and Blandonnet in Switzerland, where they stop outside the 'Jumbo' shop, now renamed 'Carrefour'. In France, the buses connect up Thoiry, Sergy and St. Genis, then cross the border to stop outside CERN, Meyrin, before continuing towards Geneva along the 'Route de Meyrin', stopping outside the 'La Tour' hospital, then at the terminus Blandonnet. The normal fare on French territory with a slight incursion into Switzerland for this purpose as far as CERN, Meyrin, is 1.20 Euros per single journey (ticket valid for one hour). The same amount is charged for any single journey in Switzerland. For example, the cost of a single journey between St. Genis and the 'La Tour' hospital would be 2.40 Euros. The season ticket ('Abonnement de Travail') opens the right to purchase a ticket valid over any period of seven days which entitles the holder to as many journeys as required between the bus stop nearest to the pl...

  8. Application of CAN Bus Technology on Zhongtong Bus%CAN总线技术在中通客车上的应用

    Institute of Scientific and Technical Information of China (English)

    赵佳

    2012-01-01

    The application status of CAN bus technology on Zhongtong bus is introduced, the methods of bus data collection and analysis on Zhongtong traditional and new energy bus are discussed and the development direction of CAN bus technology is prospected.%介绍CAN总线技术在中通客车上的应用状况,探讨中通传统客车及新能源客车的总线数据采集和分析方法。

  9. Capacity Region of a New Bus Communication Model

    Directory of Open Access Journals (Sweden)

    Zhuojun Zhuang

    2013-02-01

    Full Text Available In this paper, we study a new bus communication model, where two transmitters wish to send their corresponding private messages and a common message to a destination, while they also wish to send the common message to another receiver connected to the same wire. From an information-theoretical point of view, we first study a general case of this new model (with discrete memoryless channels. The capacity region composed of all achievable (R0,R1,R2 triples is determined for this general model, where R1 and R2 are the transmission rates of the private messages and R0 is the transmission rate of the common message. Then, the result is further explained via the Gaussian example. Finally, we give the capacity region for the new bus communication model with additive Gaussian noises and attenuation factors. This new bus communication model captures various communication scenarios, such as the bus systems in vehicles, and the bus type of communication channel in power line communication (PLC networks.

  10. Hammond Bay Biological Station

    Data.gov (United States)

    Federal Laboratory Consortium — Hammond Bay Biological Station (HBBS), located near Millersburg, Michigan, is a field station of the USGS Great Lakes Science Center (GLSC). HBBS was established by...

  11. Humboldt Bay Orthoimages

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set consists of 0.5-meter pixel resolution, four band orthoimages covering the Humboldt Bay area. An orthoimage is remotely sensed image data in which...

  12. Bathymetry in Jobos Bay

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This image represents a 4x4 meter resolution bathymetric surface for Jobos Bay, Puerto Rico (in NAD83 UTM 19 North). The depth values are in meters referenced to...

  13. Logy Bay Fishing Settlement

    OpenAIRE

    S H Parsons and Sons

    2003-01-01

    202 x 151 mm. Showing the small inlet with moored rowing boats and rough wooden shacks built on the cliffside. Lying about seven miles from St. John's, Logy Bay was used as a summertime fishing station.

  14. Biscayne Bay Alongshore Epifauna

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Field studies to characterize the alongshore epifauna (shrimp, crabs, echinoderms, and small fishes) along the western shore of southern Biscayne Bay were started...

  15. Contagion processes on urban bus networks in Indian cities

    CERN Document Server

    Chatterjee, Atanu; Jagannathan, Krishna

    2015-01-01

    Bus transportation is considered as one of the most convenient and cheapest modes of public transportation in Indian cities. Due to their cost-effectiveness and wide reachability, they help a significant portion of the human population in cities to reach their destinations every day. Although from a transportation point of view they have numerous advantages over other modes of public transportation, they also pose a serious threat of contagious diseases spreading throughout the city. The presence of numerous local spatial constraints makes the process and extent of epidemic spreading extremely difficult to predict. Also, majority of the studies have focused on the contagion processes on scale-free network topologies whereas, spatially-constrained real-world networks such as, bus networks exhibit a wide-spectrum of network topology. Therefore, we aim in this study to understand this complex dynamical process of epidemic outbreak and information diffusion on the bus networks for six different Indian cities usin...

  16. Optimal Locations of Bus Stops Connecting Subways near Urban Intersections

    Directory of Open Access Journals (Sweden)

    Yuan Cui

    2015-01-01

    Full Text Available Unsuitable locations of bus stops which provide feeder transportation connecting subways near urban intersections usually lead to the low efficiency of public transport and level of passenger service. A multiobjective optimization model to distribute such stop locations is proposed to attain the shortest total walk distance of passengers and minimum delay time of cars through intersections and travel time of buses. The Pareto frontier and optimal solutions for the proposed model are given by the distance-based and enumerative methods. The Xizhimen bus stop is selected to implement case studies for verifying the validity of the proposed model. The analysis of sensitivity on possible solutions is also carried out in the case studies. The results show that the proposed model is capable of optimizing the locations of bus stops connecting subways near intersections and helpful to improve the level of passengers service and operational efficiency of public transportation.

  17. American Fuel Cell Bus Project Evaluation. Second Report

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, Leslie [National Renewable Energy Lab. (NREL), Golden, CO (United States); Post, Matthew [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-09-01

    This report presents results of the American Fuel Cell Bus (AFCB) Project, a demonstration of fuel cell electric buses operating in the Coachella Valley area of California. The prototype AFCB was developed as part of the Federal Transit Administration's (FTA's) National Fuel Cell Bus Program. Through the non-profit consortia CALSTART, a team led by SunLine Transit Agency and BAE Systems developed a new fuel cell electric bus for demonstration. SunLine added two more AFCBs to its fleet in 2014 and another in 2015. FTA and the AFCB project team are collaborating with the U.S. Department of Energy (DOE) and DOE's National Renewable Energy Laboratory to evaluate the buses in revenue service. This report summarizes the performance results for the buses through June 2015.

  18. High Performance BDR for the PCU of AlphaBus

    Science.gov (United States)

    Subrier, Laurent; Besdel, Patrick; Daubresse, Thierry; Trehet, Eric

    2008-09-01

    Very high-power satellites for Telecom missions require 100V bus. Some Telecom payloads may be used in TDMA mode with a power modulation up to 30% of the Payload power. Full performance of the PCU is required in this case even in eclipse mode. It is clear that this requirement is very demanding especially for the BDR design.100V bus system leads making this requirement more difficult as Bus and Battery short-circuit protections have to operate under a voltage of 100V. This paper describes first the overall BDR design with a special focus on the innovative battery short-circuit protection that is not achieved by a "classical" series SSPC on the battery line.The constraints brought by the TDMA mode are detailed, especially on the input filter of the BDR in presence of large battery inductance. The solution developed to cope with large TDMA current is then presented with the associated TDMA performance.

  19. Practical experience with IEEE 1588 high precision time synchronization in electrical substation based on IEC 61850 process bus

    Energy Technology Data Exchange (ETDEWEB)

    Moore, R.; Goraj, M.J.; McGhee, J. [RuggedCom Inc., Concord, ON (Canada)

    2010-07-01

    This paper discussed a time synchronization and dynamic multicast filtering procedure conducted on an IEC 61850 process bus. The Institute of Electrical and Electronic (IEEE) 1588 time synchronization and dynamic multicast filtering procedure was conducted at a substation equipped with non-conventional instrument transformers (NCIT) and intelligent circuit breakers. The process bus interconnected IEDs within a bay that included a real time sampled value (SV) measurement system. The system was designed to reduce the use of copper wiring and to eliminate high energy signal processes. Digitized sampled measured values were sent from the electronic instrument transformers to protect and control relays. A merging unit was used to enable the transmission of the digitized current and voltage measurements across an ethernet network. Two sampling rates were supplied for power system monitoring and protection applications. The merging units continuously sent sampling values of current and voltages acquired from primary equipment. Precision time protocol systems were discussed, and issues related to time synchronization were reviewed. A network topology was provided. 4 refs., 4 figs.

  20. Distributed cooperative synchronization strategy for multi-bus microgrids

    DEFF Research Database (Denmark)

    Sun, Yao; Zhong, Chaolu; Hou, Xiaochao;

    2017-01-01

    synchronization methods based on centralized communication are very costly and not suitable for multi-bus microgrids that have a large number of distributed generators (DGs). To address this concern, this study presents an active synchronization control strategy based on distributed cooperation technology...... for multi-bus microgrids. The proposed method can reconnect the microgrid in island to UG seamlessly with sparse communication channels. Synchronization correction signals are generated by a voltage controller, which are only transmitted to the leader DGs. Meanwhile, each DG exchanges information with its...

  1. Black silicon with black bus-bar strings

    DEFF Research Database (Denmark)

    Davidsen, Rasmus Schmidt; Tang, Peter Torben; Mizushima, Io;

    2016-01-01

    We present the combination of black silicon texturing and blackened bus-bar strings as a potential method for obtaining all-black solar panels, while using conventional, front-contacted solar cells. Black silicon was realized by mask-less reactive ion etching resulting in total, average reflectance...... below 0.5% across a 156x156 mm2 silicon wafer. Black bus-bars were realized by oxidized copper resulting in reflectance below 3% in the entire visible wavelength range. The combination of these two technologies may result in aesthetic, all-black panels based on conventional, front-contacted solar cells...

  2. Persecution as a Theme in Isaac Bashevis Singer's The Bus

    Institute of Scientific and Technical Information of China (English)

    Wu Minzhi

    2008-01-01

    Isaac Bashevis Singer is very much concerned about the fate of Jewish people,so he often presents Jews'sufferings in his literary works.The Bus,by means of describing the narrator's experiences during a bus tour through Spain,in different dimensions reinforces the destructive impact of persecution that Jews have gone through.Moreover,he implies such persecution is not merely confined between Jews and the Gentile,but also spreads among the whole human beings who hold differet beliefs.

  3. Module bay with directed flow

    Science.gov (United States)

    Torczynski, John R.

    2001-02-27

    A module bay requires less cleanroom airflow. A shaped gas inlet passage can allow cleanroom air into the module bay with flow velocity preferentially directed toward contaminant rich portions of a processing module in the module bay. Preferential gas flow direction can more efficiently purge contaminants from appropriate portions of the module bay, allowing a reduced cleanroom air flow rate for contaminant removal. A shelf extending from an air inlet slit in one wall of a module bay can direct air flowing therethrough toward contaminant-rich portions of the module bay, such as a junction between a lid and base of a processing module.

  4. Improving student bus-riding behavior through a whole-school intervention.

    OpenAIRE

    Putnam, Robert F; Handler, Marcie W; Ramirez-Platt, Christina M; Luiselli, James K

    2003-01-01

    We describe a multicomponent intervention to improve bus-riding behavior of students attending an urban public school. The intervention was developed with technical assistance consultation that emphasized collaboration among students, school personnel, and bus drivers. The primary intervention procedures were identifying appropriate behaviors during transportation ("bus rules"), training bus drivers to deliver positive reinforcement, and rewarding student performance through a weekly school-b...

  5. Bus Catcher: A Context Sensitive Prototype System for Public Transportation Users

    OpenAIRE

    Bertolotto, Michela; O'Hare, G.M.P.; Strahan, Robin; Brophy, Ailish; Martin, A.; McLoughlin, Eoin

    2002-01-01

    In this paper we describe the architectural and functional characteristics of Bus Catcher, a context sensitive prototype system for public transportation users. Bus Catcher assists mobile users in planning their bus rides by providing timely and accurate information about current bus locations and estimated arrival times. A complete report on the implementation together with a preliminary evaluation of the system is provided in this paper.

  6. Performance evaluation of UHF RFID technologies for real-time bus recognition in the Taipei Bus Station.

    Science.gov (United States)

    Own, Chung-Ming; Lee, Da-Sheng; Wang, Ti-Ho; Wang, De-Jun; Ting, Yu-Lun

    2013-06-18

    Transport stations such as airports, ports, and railways have adopted blocked-type pathway management to process and control travel systems in a one-directional manner. However, this excludes highway transportation where large buses have great variability and mobility; thus, an instant influx of numerous buses increases risks and complicates station management. Focusing on Taipei Bus Station, this study employed RFID technology to develop a system platform integrated with modern information technology that has numerous characteristics. This modern information technology comprised the following systems: ultra-high frequency (UHF) radio-frequency identification (RFID), ultrasound and license number identification, and backstage graphic controls. In conclusion, the system enabled management, bus companies, and passengers to experience the national bus station's new generation technology, which provides diverse information and synchronization functions. Furthermore, this technology reached a new milestone in the energy-saving and efficiency-increasing performance of Taiwan's buses.

  7. 33 CFR 100.124 - Maggie Fischer Memorial Great South Bay Cross Bay Swim, Great South Bay, New York.

    Science.gov (United States)

    2010-07-01

    ... South Bay Cross Bay Swim, Great South Bay, New York. 100.124 Section 100.124 Navigation and Navigable... NAVIGABLE WATERS § 100.124 Maggie Fischer Memorial Great South Bay Cross Bay Swim, Great South Bay, New York... swimmer or safety craft on the swim event race course bounded by the following points: Starting Point...

  8. MSCT findings in a controlled bus bombing using a pig model

    DEFF Research Database (Denmark)

    Hansen, Nikolaj Friis

    2009-01-01

    pig's position in the bus at the time of detonation. 1 of the pigs was rigged as a suicide bomber while the others were individually placed as passengers and bus driver inside the bus alongside dummies. Measurements of the blast force and fast speed video recordings were made during the detonation...

  9. 49 CFR 571.221 - Standard No. 221; School bus body joint strength.

    Science.gov (United States)

    2010-10-01

    ... means any part of the bus, of either a mechanical or electrical nature, which is explicitly identified... 49 Transportation 6 2010-10-01 2010-10-01 false Standard No. 221; School bus body joint strength... STANDARDS Federal Motor Vehicle Safety Standards § 571.221 Standard No. 221; School bus body joint...

  10. 46 CFR 112.05-3 - Main-emergency bus-tie.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Main-emergency bus-tie. 112.05-3 Section 112.05-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING EMERGENCY LIGHTING AND POWER SYSTEMS General § 112.05-3 Main-emergency bus-tie. Each bus-tie between a main...

  11. 基于排队论的并联双通道公交站台使用效率研究%Efficiency of Parallel Channels Bus Station Based on Queuing Theory

    Institute of Scientific and Technical Information of China (English)

    韩宝睿; 邬岚; 刘继平

    2011-01-01

    针对公交车在车站排队延误过长的问题,提出设置并联双站台的形式加以解决,从候车人的心理和实际观察角度进行了微观设计.为从理论上证明双站台的优点与通行能力,结合实例应用统计方法验证了具体路段公交车连续到站间隔服从泊松分布,应用WinQSB工具箱、根据排队论计算分析了并联双通道站台公交站点的各项排队指标.将该指标与实际站台排队数据比较,新型双站台形式能有效减少延误和排队长度.%For the delay of queuing on the bus station, a new solution as parallel channels bus bay is proposed.For proving the advantages and testing the capacity of this new kind of bus station, an example verifies that the bus arriving yields to random Poisson distribution.With the application of WinQSB tools, the index of the queuing is calculated based on queuing theory.Compared with specific bus station, the parallel channel bus station has less delay and queuing length.This kind of station can be widely applied.

  12. How to Cut Costs by Saving School Bus Fuel.

    Science.gov (United States)

    Seiff, Hank

    A program started in Washington County, Maryland in 1980 has been successful in saving school bus fuel and bringing down transportation costs incurred by its fleet of 200 buses. Driver training and motivation, as well as a partial transfer to diesel buses, are at the heart of the program. The drivers are taught five fuel saving techniques: cut…

  13. Bullying on the School Bus: A Video Analysis

    Science.gov (United States)

    Raskauskas, Juliana

    2005-01-01

    The purpose of this study was to assess the nature of bullying on the school bus. Videotapes were used to identify occurrences of bullying on buses of elementary school students. Incidents were reviewed for forms of bullying, fullness, presence of friends, and severity of acts. Results indicated that approximately two incidents occurred per bus…

  14. Bussikontsern Go Bus ihaldab Harjumaa turgu / Signe Kalberg

    Index Scriptorium Estoniae

    Kalberg, Signe, 1959-

    2005-01-01

    AS-i Tarbus ja kaheksa bussiettevõtte ühinemisel moodustati AS Go Bus, ettevõte plaanib veel mitme bussifirma liitmist. Atko Grupi juhatuse esimehe Margo Tomingase, AS Sebe nõukogu esimehe Hugo Osula arvamus. Lisa: Konkurentsiamet hoiab silma peal

  15. Overview of Multi-DC-Bus Solutions for DC Microgrids

    DEFF Research Database (Denmark)

    Ricchiuto, D.; Mastromauro, R.A.; Liserre, Marco;

    2013-01-01

    DC Microgrids have recently received a lot of attention in the last years due to high penetration of renewable energy sources as well as distributed energy storage systems. In the future DC microgrids could be preferable respect to AC microgrids in terms of redundancy since multi-DC-Bus solutions...

  16. What's Happening on the School Bus Performance Front?

    Science.gov (United States)

    Combs, Hanford L.

    The most urgent order of business in the national scene is to complete the development of a series of new performance tests for school bus bodies and chassis to establish a benchmark for safe construction that can be verified by independent testing agencies. Such performance tests should incorporate the new Federal Joint Strength Efficiency…

  17. High-Tech School Bus Teaches Students on the Road

    Science.gov (United States)

    Katims, Lauren

    2011-01-01

    Last year, kindergarten through high school students in the rural Hector, Arkansas, School District barely had the technology resources that keep kids interested in math and science. This year, they potentially have the most advanced resources in the country--before they even step into the classroom. One school bus in Arkansas' Pope County has…

  18. A Novel Time Synchronization Method for Dynamic Reconfigurable Bus

    Directory of Open Access Journals (Sweden)

    Zhang Weigong

    2016-01-01

    Full Text Available UM-BUS is a novel dynamically reconfigurable high-speed serial bus for embedded systems. It can achieve fault tolerance by detecting the channel status in real time and reconfigure dynamically at run-time. The bus supports direct interconnections between up to eight master nodes and multiple slave nodes. In order to solve the time synchronization problem among master nodes, this paper proposes a novel time synchronization method, which can meet the requirement of time precision in UM-BUS. In this proposed method, time is firstly broadcasted through time broadcast packets. Then, the transmission delay and time deviations via three handshakes during link self-checking and channel detection can be worked out referring to the IEEE 1588 protocol. Thereby, each node calibrates its own time according to the broadcasted time. The proposed method has been proved to meet the requirement of real-time time synchronization. The experimental results show that the synchronous precision can achieve a bias less than 20 ns.

  19. Platform Screen Doors Enhanced Bus Rapid Transit Intelligent Performance

    Directory of Open Access Journals (Sweden)

    Chonghua Zhou

    2011-06-01

    Full Text Available It is the last straw to clutch at to solve the urban traffic issue, to develop high-capacity rapid transit and promote transit priority. Characterized by low cost, short construction cycle and flexible development, Bus Rapid Transit (BRT has been favored by more and more cities in the world. The Platform Screen Doors (PSDs system is an important component at BRT stations, and it is original motive to be designed to satisfy the growing demand from BRT application to provide increased safety and comfort in the first. With the continual increased demand for BRT intelligent performance, the PSDs system is applied to get Bus Location Information with accurate position of arrival and departure at stop, to provide Real-Time Information (RTI for BRT passengers using PSDs/GPS compound location technology, to put into practice Bus Fleet Management (BFM. Considering the capability of accurate location, it can be applied to actualize Bus Sign Priority in the future. The authors are luck to take in part the practice of BRT system, especially in the BRT intelligent systems, the papers will introduce upwards application and conceive in detail.

  20. Measurements on and simulations of a biogas-fuelled bus

    International Nuclear Information System (INIS)

    Mathematical models for torque/fuel consumption and emissions have been studied for a biogas-fuelled bus used in urban traffic in Linkoeping, Sweden. It is noted that the cycle ECE R-49 is not representative for city buses, but that the Braunschweig cycle gives rather good agreement. 2 refs, 37 figs

  1. Measuring Bus Drivers' Occupational Stress Under Changing Working Conditions

    NARCIS (Netherlands)

    Hlotova, Y.; Cats, O.; Meijer, S.A.

    2014-01-01

    Stress is an immense problem in modern society; approximately half of all occupational illnesses are directly or indirectly related to stress. The work of a bus driver is typically associated with high stress levels that negatively influence individual well-being as well as workforce management. The

  2. GeoBus: sharing science research with schools

    Science.gov (United States)

    Roper, Kathryn; Robinson, Ruth; Moorhouse, Ben

    2016-04-01

    GeoBus (www.geobus.org.uk) is an educational outreach project that was developed in 2012 by the Department of Earth and Environmental Sciences at the University of St Andrews, and it is currently sponsored by industry, NERC, The Crown Estate, and the Scottish Government. The aims of GeoBus are to support the teaching of Earth Science in secondary (middle and high) schools by providing teaching support to schools that have little or no experience in teaching this subject. This is, in part, done through the sharing of new science research outcomes and the experiences of young researchers with school pupils to provide a bridge between industry, higher education institutions, research councils and schools. Since its launch, over 40,000 pupils will have been involved in experiential Earth science learning activities in 190 different schools (over 400 separate visits) across the length and breadth of Scotland: many of these schools are in remote and disadvantaged regions. A new GeoBus project is under development within the Department of Earth Sciences at UCL in London. A key aim of GeoBus is to incorporate new research into our workshops with the main challenge being the development of appropriate resources that incorporate the key learning aims and requirements of the science and geography curricula. GeoBus works closely with researchers, teachers and educational practitioners to tailor the research outcomes to the curricula as much as possible. Over the past four years, GeoBus has developed 17 workshops, 5 challenge events and extensive field trips and each of these activities are trialled and evaluated within the university, and adjustments are made before the activities are delivered in schools. Activities are continually reviewed and further developments are made in response to both teacher and pupil feedback. This critical reflection of the project's success and impact is important to insure a positive and significant contribution to the science learning in

  3. Real life testing of a Hybrid PEM Fuel Cell Bus

    Science.gov (United States)

    Folkesson, Anders; Andersson, Christian; Alvfors, Per; Alaküla, Mats; Overgaard, Lars

    Fuel cells produce low quantities of local emissions, if any, and are therefore one of the most promising alternatives to internal combustion engines as the main power source in future vehicles. It is likely that urban buses will be among the first commercial applications for fuel cells in vehicles. This is due to the fact that urban buses are highly visible for the public, they contribute significantly to air pollution in urban areas, they have small limitations in weight and volume and fuelling is handled via a centralised infrastructure. Results and experiences from real life measurements of energy flows in a Scania Hybrid PEM Fuel Cell Concept Bus are presented in this paper. The tests consist of measurements during several standard duty cycles. The efficiency of the fuel cell system and of the complete vehicle are presented and discussed. The net efficiency of the fuel cell system was approximately 40% and the fuel consumption of the concept bus is between 42 and 48% lower compared to a standard Scania bus. Energy recovery by regenerative braking saves up 28% energy. Bus subsystems such as the pneumatic system for door opening, suspension and brakes, the hydraulic power steering, the 24 V grid, the water pump and the cooling fans consume approximately 7% of the energy in the fuel input or 17% of the net power output from the fuel cell system. The bus was built by a number of companies in a project partly financed by the European Commission's Joule programme. The comprehensive testing is partly financed by the Swedish programme "Den Gröna Bilen" (The Green Car). A 50 kW el fuel cell system is the power source and a high voltage battery pack works as an energy buffer and power booster. The fuel, compressed hydrogen, is stored in two high-pressure stainless steel vessels mounted on the roof of the bus. The bus has a series hybrid electric driveline with wheel hub motors with a maximum power of 100 kW. Hybrid Fuel Cell Buses have a big potential, but there are

  4. Energy Performance Optimization of a Bus for Urban Public Transport

    Directory of Open Access Journals (Sweden)

    Paola Gori

    2013-08-01

    Full Text Available Nowadays many people use public transports in urban centres. Consequently, every day a lot of buses move within cities, trying to ensure the best service to citizens. During the year buses becomecrowded places and using an air conditioning system in constant operation, it tries to ensure a certain condition of comfort for the passengers on board. The aim of this study is to analyse and optimize the energy performance of a bus shell, identifying practical solutions that have not yet been adopted in order to reduce the impact of air conditioning on bus consumption and, therefore, on air pollution. For this reason it was decided to conduct a thermal analysis of a bus for public transport, in order to understandthe behaviour of the bus shell and to deduce possible optimization measures that have not yet been made until now. The analysis was carried out considering the hottest day of July and the coldest day ofJanuary, considering the conditions of operation based on the most common graphics TGM able to define the concentration of traffic city during the 24 hours per day. The study was done using the dynamicsimulation software TRNSYS. With this software it was possible to recreate faithfully the structure of the bus and the external environmental conditions, assessing the impact of different technical solutions for an improvement of internal conditions and a reduction of the cooling capacity required. Because the presence of passengers in public transport is considered like a “benefit” during the winter, the analysis started with the identification of a summer solution and the subsequent evaluation of this solution for the wintertime. The aim of this study was to optimize the bus shell and select the most appropriate solutions. Regarding the transparent surfaces it has been given importance to factors such as the thermal transmittance and the solar gain factor (g-value. Aware of the influence given by the solar radiation on the energy loads, we

  5. The Fermi's Bayes Theorem

    CERN Document Server

    D'Agostini, G

    2005-01-01

    It is curious to learn that Enrico Fermi knew how to base probabilistic inference on Bayes theorem, and that some influential notes on statistics for physicists stem from what the author calls elsewhere, but never in these notes, {\\it the Bayes Theorem of Fermi}. The fact is curious because the large majority of living physicists, educated in the second half of last century -- a kind of middle age in the statistical reasoning -- never heard of Bayes theorem during their studies, though they have been constantly using an intuitive reasoning quite Bayesian in spirit. This paper is based on recollections and notes by Jay Orear and on Gauss' ``Theoria motus corporum coelestium'', being the {\\it Princeps mathematicorum} remembered by Orear as source of Fermi's Bayesian reasoning.

  6. SunLine Transit Agency Advanced Technology Fuel Cell Bus Evaluation: First Results Report

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, L.; Chandler, K.

    2011-03-01

    This report describes operations at SunLine Transit Agency for their newest prototype fuel cell bus and five compressed natural gas (CNG) buses. In May 2010, SunLine began operating its sixth-generation hydrogen fueled bus, an Advanced Technology (AT) fuel cell bus that incorporates the latest design improvements to reduce weight and increase reliability and performance. The agency is collaborating with the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) to evaluate the bus in revenue service. This report provides the early data results and implementation experience of the AT fuel cell bus since it was placed in service.

  7. Implementation of an AMBA Advanced High Performance Bus protocol IP block

    OpenAIRE

    Mahendra Vucha Sandeep Magarde; Miss. Shruti Bhargava; Rishabh Singh Kurmi

    2011-01-01

    The design of an AMBA advanced high performance bus (AHB) protocol IP block is presented in this paper. The AHB (Advanced High-performance Bus) is a high-performance bus in AMBA (Advanced Microcontroller Bus Architecture) family. This AHB can be used in high clock frequency system modules. The AHB acts as the high-performance system backbone bus. AHB supports the efficient connection of processors, on-chip memories and off-chip external memory interfaces with low-power peripheral macro cell f...

  8. Two hot spots in China's bus market%中国客车市场呈现两大热点

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ According to an analysis on statistics of production and sales of China's 70 bus enterprises in 2005, bus sales are expected to continue to grow this year, posing a better performance than that in the previous year, and the urban public bus transport, rural bus transport and export together will be a major motive power for pulling up growth of the industry.

  9. Yaquina Bay Topobathy DEM

    Science.gov (United States)

    The U.S.EPA contracted with the U.S.ACE to obtain intertidal and subtidal bathymetric soundings of Yaquina Bay between Poole Slough and the South Beach Marina in 2002. These data were compiled with U.S.ACE subtidal soundings from 1999, 1998, 2000 and National Ocean Service soundi...

  10. StarBus+: Distributed Object Middleware Practice for Internet Computing

    Institute of Scientific and Technical Information of China (English)

    Huai-Min Wang; Yu-Feng Wang; Yang-Bin Tang

    2005-01-01

    In the past decade, the booming of Internet challenges the middleware in three aspects: quality of service,balance of changes and stabilization, and across-Internet integration. This paper presents our work on distributed object computing middleware technology for these challenges, as well as the research and development on StarBus+, which is a CORBA standard-compliant middleware suite with the features such as object request broker supporting multi-* quality of service, component model, and integration with Web Service. This paper comprehensively presents the design and characteristics of StarBns+, and demonstrates how StarBus+ is enhanced to address the challenges of Internet computing through three case studies: inter-enterprise integration over Internet, application evolution through dynamic reconfiguration,and great massive information system building. The paper also suggests some research directions which are important for Internet computing.

  11. Bus Encoder for Crosstalk Avoidance in RLC Modeled Interconnects

    Directory of Open Access Journals (Sweden)

    G. Nagendra Babu

    2012-02-01

    Full Text Available Most of the encoding methods proposed in recent years have dealt with only RC modeled VLSI interconnects. For deep sub micron technologies (DSM, on-chip inductive effects have increased due to faster clock speeds, smaller signal rise times and longer length of on-chip interconnects. All these issues raise the concern for cross talk, propagation delay and power dissipation of overall. Therefore, this research work introduces an efficient Bus Encoder using Bus Inverting (BI method. The proposed design dramatically reduces both cross talk and power dissipation in RLC modeled interconnects which makes it suitable for current high-speed low-power VLSI interconnects. The proposed model demonstrates an overall reduction of power dissipation and cross talk induced delay by 55.43% and 45.87%, respectively.

  12. Bus Vent Design Evolution for the Solar Dynamics Observatory

    Science.gov (United States)

    Woronowicz, Michael

    2010-01-01

    As a spacecraft undergoes ascent in a launch vehicle, its pressure environment transitions from one atmosphere to high vacuum in a matter of minutes. Venting of internal cavities is necessary to prevent the buildup of pressure differentials across cavity walls. Opposing the need to vent these volumes freely into space are thermal, optical, and electrostatic requirements for limiting or prohibiting the intrusion of unwanted energy into the same cavities. Bus vent design evolution is discussed for the Solar Dynamics Observatory. Design changes were influenced by a number of factors and concerns, such as contamination control, electrostatic discharge, changes in bus material, and driving fairing ascent pressure for a launch vehicle that was just entering service as this satellite project had gotten underway.

  13. Implementation of I 2C Master Bus Protocol on FPGA

    Directory of Open Access Journals (Sweden)

    Regu Archana

    2014-10-01

    Full Text Available The focus of this paper is on I 2C (Inter-Integrated Circuit protocol interface between Master Bus protocol and slave. Here we are interfacing between micro-controller and DS1307. I 2C bus protocol sends 8 bit data from micro-controller to DS1307. This module was designed in VHDL and simulated and synthesized using Xilinx ISE Design Suite 14.2. I 2C and optimized for area and power. This concept is widely applicable from any high speed device or low speed device to any low speed device or high speed device. This module acts as a slave for the DS1307 at the same time acts like a master for the micro-controller device which can be considered as a slave. . It can be used to interface low speed peripherals like motherboard, embedded system, mobile phones, set top boxes, DVD, PDA’s or other electronic devices.

  14. Hardware Engines for Bus Encryption: A Survey of Existing Techniques

    CERN Document Server

    Elbaz, R; Sassatelli, G; Guillemin, P; Anguille, C; Bardouillet, M; Buatois, C; Rigaud, J B

    2011-01-01

    The widening spectrum of applications and services provided by portable and embedded devices bring a new dimension of concerns in security. Most of those embedded systems (pay-TV, PDAs, mobile phones, etc...) make use of external memory. As a result, the main problem is that data and instructions are constantly exchanged between memory (RAM) and CPU in clear form on the bus. This memory may contain confidential data like commercial software or private contents, which either the end-user or the content provider is willing to protect. The goal of this paper is to clearly describe the problem of processor-memory bus communications in this regard and the existing techniques applied to secure the communication channel through encryption - Performance overheads implied by those solutions will be extensively discussed in this paper.

  15. Environmental assessment of 9 European public bus transportation systems

    DEFF Research Database (Denmark)

    Nanaki, Eva; Koroneos, Christophis; Roset, Jaume;

    2017-01-01

    that affect the production of carbon dioxide (CO2) as well as of air pollutants, in 9 major European cities, aiming to provide a comprehensive overview of the actual knowledge on the atmospheric pollution from public transportation systems. CO2 emissions as well as air pollutants, such as CO, HC, PM, NOx......The transportation sector is one of the largest sources of EU’s greenhouse gas emissions. In 2011, transportation represented approximately 25 percent of total EU’s greenhouse gas emissions. Urban mobility accounts for 40% of all CO2 emissions of road transport and up to 70% of other pollutants...... are calculated for the diesel and CNG bus fleets of the European cities under study. Finally the environmental benefits, in terms of CO2 and CO, HC, PM, NOx emissions reductions, from the penetration of different biodiesel blends (from B10 to B100) to the bus fleets are estimated....

  16. Health effect of a bus ride in an urban environment

    Energy Technology Data Exchange (ETDEWEB)

    Takano, T.

    1983-07-01

    Health effects on subjects during a bus drive on an urban road were investigated in a real situation. Leukocyte count, adrenalin level in blood and urine, noradrenalin and dopamine in urine, diastolic blood pressure, and index of vascular resistance increased significantly on the drive day compared with the control day. A bus drive on an urban road induced enhanced sympathetic-adreno-medullary activity in real life as a result of the comprehensive effect of various factors. The concentrations of air pollutants were excessively high on the road, and correlated with traffic volume. It was concluded that the interactions between psychogenic, physical nonspecific and physical specific effects should be taken into consideration when evaluating human health effects of air pollution in the urban environment.

  17. THE DESIGN OF VMEBUS BRIDGE CONTROLLER WITH SHARC BUS

    Institute of Scientific and Technical Information of China (English)

    Wang Min; Wu Shunjun; Su Tao

    2005-01-01

    Targeting at the high expense and inflexibility to realize VMEbus bridge controller by professional Integrated Circuit (IC), this paper presents a scheme of adopting CPLD/FPGA (Complicated Programmable Logic Device/Field Programmable Gate Array) to design bridge controller between VMEbus and local bus. SHARC DSP (Digital Signal Processor) bus is an example. It has functions of nearly entire master/slave interface of VMEbus, and can act as DMA (Direct Memory Access) controller and perform block transfer in DMA or master processor initiative way without length limit. External circuit of the design is very simple. In comparison with special ICs, it has high performance to price ratio and can be easily applied to local buses of other processors with quite a little modification.

  18. Technology Update of a Control System Trough Corba Bus

    CERN Document Server

    Bertocchi, A; Buceti, G; Centioli, C; Muzio, D D; Iannone, F; Mazza, G; Panella, M; Vitale, V

    2001-01-01

    After more than 10 years of activity, FTU (Frascati Tokamak Upgrade) has to face the problem of taking advantage of the new hardware and software technology saving all the investments yet done. So, for example, the 20 years old Westinghouse PLCs (communicating only through a serial line) have to be leaved in operation while a web-based tool has to be released for plan monitoring purpose. CORBA bus has been demonstrated to be the answer to set up the communication between old and new hardware and software blocks. On FTU the control system is based on Basestar, a Digital/Compaq software suite. We will describe how the real time database of Basestar is now accessed by Java graphic tools, LabView and, in principle, any package accepting external routines. An account will be also done in the data acquisition area where a Camac serial highway driver has been integrated in the new architecture still through the CORBA bus

  19. Heat storage for a bus petrol internal-combustion engine

    Science.gov (United States)

    Vasiliev, Leonard L.; Burak, Victor S.; Kulakov, Andry G.; Mishkinis, Donatas A.; Bohan, Pavel V.

    The heat storage (HS) system for pre-heating a bus petrol internal combustion engine to starting was mathematically modelled and experimentally investigated. The development of such devices is an extremely urgent problem especially for regions with a cold climate. We discuss how HS works on the effect of absorption and rejection of heat energy at a solid-liquid phase change of a HS substance. In the first part of the paper a numerical method to calculate the HS mass-dimensional parameters and their characteristics are described. In the experimental part of the paper results are given of experiments on the pre-heating device aiding to start a carburettor engine under operational conditions and analysis of data received. Practical confirmation of the theoretical development of HS devices for a bus engine for starting by pre-heating is given.

  20. Investigation on full distribution CNC system based on SERCOS bus

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    A full distribution CNC system based on SERCOS bus is studied in accordance with the limitations of traditional PC-based motion card.The conventional PC-based motion control card is dispersed into several autonomous intelligent servo-control units with the function of servo driver.The autonomous intelligent servocontrol units realize the loop control of position,velocity and current.Interpolation computation is completed in PC and the computational results are transferred to every autonomous intelligent servo-control unit by high speed SERCOS bus.Software or hardware synchronization technology is used to ensure all servomotors are successive and synchronously running.The communication and synchronization technology of SERCOS are also researched and the autonomous intelligent servo-control card is developed byself.Finally,the experiment of circle contour process on a prototype system proves the feasibility.

  1. An Optimization Model for the Selection of Bus-Only Lanes in a City.

    Directory of Open Access Journals (Sweden)

    Qun Chen

    Full Text Available The planning of urban bus-only lane networks is an important measure to improve bus service and bus priority. To determine the effective arrangement of bus-only lanes, a bi-level programming model for urban bus lane layout is developed in this study that considers accessibility and budget constraints. The goal of the upper-level model is to minimize the total travel time, and the lower-level model is a capacity-constrained traffic assignment model that describes the passenger flow assignment on bus lines, in which the priority sequence of the transfer times is reflected in the passengers' route-choice behaviors. Using the proposed bi-level programming model, optimal bus lines are selected from a set of candidate bus lines; thus, the corresponding bus lane network on which the selected bus lines run is determined. The solution method using a genetic algorithm in the bi-level programming model is developed, and two numerical examples are investigated to demonstrate the efficacy of the proposed model.

  2. Common Traffic Violations of Bus Drivers in Urban China: An Observational Study.

    Directory of Open Access Journals (Sweden)

    Qiqi Wang

    Full Text Available To report common traffic violations in bus drivers and the factors that influence those violations in urban China.We conducted an observational study to record three types of traffic violations among bus drivers in Changsha City, China: illegal stopping at bus stations, violating traffic light signals, and distracted driving. The behaviors of bus drivers on 32 routes (20% of bus routes in the city were observed. A two-level Poisson regression examined factors that predicted bus driver violations.The incidence of illegal stopping at bus stations was 20.2%. Illegal stopping was less frequent on weekends, sunny days, and at stations with cameras, with adjusted incidence rate ratios (IRRs of 0.81, 0.65 and 0.89, respectively. The incidence of violating traffic light signals was 2.2%, and was lower on cloudy than sunny days (adjusted IRR: 0.60. The incidence of distracted driving was 3.3%. The incidence of distracted driving was less common on cloudy days, rainy or snowy days, and foggy/windy/dusty days compared to sunny days, with adjusted IRRs of 0.54, 0.55 and 0.07, respectively.Traffic violations are common in bus drivers in urban China and they are associated with the date, weather, and presence of traffic cameras at bus station. Further studies are recommended to understand the behavioral mechanisms that may explain bus driver violations and to develop feasible prevention measures.

  3. City of Chula Vista hydrogen fuel cell bus demonstration project

    Energy Technology Data Exchange (ETDEWEB)

    Gustafson, B.; Bamberger, B.

    1996-10-01

    Hydrogen as an energy carrier and fuel has potential for various uses including electricity, commercial, residential, transportation, and industrial. It is an energy carrier that can be produced from a variety of primary sources and potentially can accomplish these various uses while significantly reducing pollution by substituting for or reducing the use of fossil fuels. One of the most immediate and potentially viable roles for hydrogen as an energy carrier will be its use as a transportation fuel, especially in densely populated urban areas where automotive emissions contribute significantly to air pollution. The Department of Energy`s commitment to research and development of hydrogen as an alternative fuel, and California`s Zero Emission Vehicle (ZEV) requirements, both provide the impetus and favorable circumstance for demonstrating hydrogen as a transportation fuel on an urban bus system. The purpose of this project is to demonstrate the feasibility of using solid polymer fuel cells in a hydrogen-powered electric drive system for an urban transit bus application. Fuel cell buses use hydrogen fuel and oxygen from the air to produce electrical power with the only byproduct being pure water. Proton Exchange Membrane (PEM) fuel cells are proposed for this project. Current evidence suggests that fuel cells, which rely on hydrogen and a process known as proton exchange to generate their power, appear to have an infinite life span. All exhaust pollution is completely eliminated, resulting in a Zero Emission Vehicle (ZEV). An urban bus system offers the potential for developing a market for the production of hydrogen propulsion technology due to extensive vehicular use in densely populated areas experiencing pollution from numerous sources, and because the central garaging facilities or the bus system facilitates fueling and maintenance functions.

  4. System investigation H2 bus fleet (technology, regulations, future development)

    International Nuclear Information System (INIS)

    In cooperation with Ansaldo Ricerche, ICIL have compiled a technical catalogue, providing the impartial descriptions, both of existing technology and regulations, and the likely future developments of these, as to remedy the first problem faced by a potential hydrogen bus fleet operator viz the absence of an impartial description of the available vehicle and fuels systems together with the absence of a description of regulatory and safety factors which need consideration. (orig.)

  5. Market brief : the alternative fuels bus market in India

    International Nuclear Information System (INIS)

    In 2003, alternative fuel bus technologies in India were valued at approximately $1.5 billion. There are an estimated 600,000 buses in India, of which 21 per cent are owned by public transit. Bus production is currently 33,000 per year and increasing at 4 per cent annually. The main alternative fuel bus technologies include fuel cells, compressed natural gas (CNG) and liquefied petroleum gas (LPG). Since urban centres in India are among the most polluted in the world, demand for these technologies is strong. India is ranked fifth in the world in terms of vehicles converted to natural gas. In 2003, New Delhi switched from diesel to CNG fuel for buses but has faced challenges because there is no well-developed underground distribution system and refilling times are long due to weak pressure at fueling stations. India's new $28 million fuel cell bus development project aims to place 8 fuel cell powered buses with the Delhi Transport Corporation. This market brief describes the potential for Canadian suppliers to enter into joint ventures to establish local production facilities and transfer technology expertise. It describes the key factors shaping market growth with particular reference to sector reform, and opportunities with actual and planned projects. The competitive environment was also discussed with reference to local capabilities, international competition, Canadian position, and a competitive advantage through Canadian government policies and initiatives. A section of the report on public-sector customers listed the companies that buy alternative fuel buses in India. Considerations for market-entry in India were also outlined

  6. Modelling urban bus transport emissions in Santiago de Cuba

    OpenAIRE

    Warren, James; Avila, Jordi Mirabent

    2010-01-01

    This study described and focuses on the public transport bus system in Santiago de Cuba. Specifically we explore the fuel consumption of the various diesel buses over a three year period from 2007 to 2009 and with a forecast for the forthcoming years. The study considers the potential for fuel savings through a variety of methods which are each described and then modelled. Pollution is also calculated for a variety of scenarios and some suggestions are made in order to lower the overall...

  7. Virtual Instrument Based on GPIB Interface Bus1

    Institute of Scientific and Technical Information of China (English)

    Xiao,Ying; Qi,Hanhong

    2004-01-01

    In this paper, we introduced the technique of GPIB businterface. Through the controlling of the GPIB interface board,the computer controlled the current source and the voltmeter, both of which have GPIB bus interface, and a virtual instrument testing system for I~V curve was composed. The virtual instrument front panel and the background graphical control program in Labview environment accomplish virtual instrument testing task along with the hardware system.

  8. Damping torque analysis for DC bus implemented damping control

    OpenAIRE

    W. Du; WANG, HAIFENG; Ju, P.; Dunn, R

    2010-01-01

    Damping torque analysis is a well-developed technique for understanding and studying power system oscillations. This paper presents the applications of damping torque analysis for DC bus implemented damping control in power transmission networks in two examples. The first example is the investigation of damping effect of shunt VSC (Voltage Source Converter) based FACTS voltage control, i.e., STATCOM (Static Synchronous Compensator) voltage control. It is shown in the paper that STATCOM voltag...

  9. An asynchronous controller for a daisychainable vme bus interrupter

    OpenAIRE

    Wollowski, Ralf; Beister, Jochen; Kuhn, Matthias

    1999-01-01

    An interrupter for use in a daisy-chained VME bus interrupt system has beendesigned and implemented as an asynchronous sequential circuit. The concur-rency of the processes posed a design problem that was solved by means of asystematic design procedure that uses Petri nets for specifying system and in-terrupter behaviour, and for deriving a primitive flow table. Classical designand additional measures to cope with non-fundamental mode operation yieldeda coded state-machine representation. Thi...

  10. An Electric Bus with a Battery Exchange System

    OpenAIRE

    Jeongyong Kim; Inho Song; Woongchul Choi

    2015-01-01

    As part of the ongoing effort to be independent of petroleum resources and to be free from pollutant emission issues, various electric vehicles have been developed and tested through their integration with real world systems. In the current paper, yet another application specific EV for public transportation, an electric bus, is introduced and explained with results from the pilot test program which was carried out under real traffic conditions. The main feature of the current system is a bat...

  11. FAKTOR PENYEBAB KERUSAKAN SISTEM MESIN PADA BUS APTB PPD

    OpenAIRE

    Laela Chairani; Yulita Veranda Usman; Nur Yulianti Hidayah

    2015-01-01

    Comfort and safety of public transportation, particularly APTB PPD buses, becomes high expectations for its customers. Those expectations must be supported by the application of a good engine maintenance system. By using the method of Reliability Centered Maintenance may be determined appropriate actions to mitigate damage. From the analysis known the failures of the APTB PPD bus are malfunctions of the fuel engine, power transfer systems, difficulty to move the gear lever, and lubricating sy...

  12. BC Transit Fuel Cell Bus Project: Evaluation Results Report

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, L.; Post, M.

    2014-02-01

    This report evaluates a fuel cell electric bus demonstration led by British Columbia Transit (BC Transit) in Whistler, Canada. BC Transit is collaborating with the California Air Resources Board and the U.S. Department of Energy's National Renewable Energy Laboratory to evaluate the buses in revenue service. This evaluation report covers two years of revenue service data on the buses from April 2011 through March 2013.

  13. Evaluation of Bus Vibration Comfort Based on Passenger Crowdsourcing Mode

    Directory of Open Access Journals (Sweden)

    Hong Zhao

    2016-01-01

    Full Text Available Vibration comfort is an important factor affecting the quality of service (QoS of bus. In order to make people involved in supervising bus’s vibration comfort and improve passengers’ riding experience, a novel mode of passenger crowdsourcing is introduced. In this paper, comfort degree of bus vibration is calculated from bus’s vibration signals collected by passengers’ smartphones and sent through WiFi to the Boa web server which shows the vibration comfort on the LCD deployed in bus and maybe trigger alarm lamp when the vibration is beyond the threshold. Three challenges here have been overcome: firstly, space coordinate transformation algorithm is used to solve the constant drift of signals collected; secondly, a low-pass filter is designed to isolate gravity from signals real-timely via limited computing resources; thirdly, an embedded evaluation system is developed according to the calculation procedure specified by criterion ISO 2631-1997. Meanwhile, the model proposed is tested in a practical running environment, the vibration data in whole travel are recorded and analyzed offline. The results show that comfort degree of vibration obtained from the experimental system is identical with the truth, and this mode is proved to be effective.

  14. The AI Bus architecture for distributed knowledge-based systems

    Science.gov (United States)

    Schultz, Roger D.; Stobie, Iain

    1991-01-01

    The AI Bus architecture is layered, distributed object oriented framework developed to support the requirements of advanced technology programs for an order of magnitude improvement in software costs. The consequent need for highly autonomous computer systems, adaptable to new technology advances over a long lifespan, led to the design of an open architecture and toolbox for building large scale, robust, production quality systems. The AI Bus accommodates a mix of knowledge based and conventional components, running on heterogeneous, distributed real world and testbed environment. The concepts and design is described of the AI Bus architecture and its current implementation status as a Unix C++ library or reusable objects. Each high level semiautonomous agent process consists of a number of knowledge sources together with interagent communication mechanisms based on shared blackboards and message passing acquaintances. Standard interfaces and protocols are followed for combining and validating subsystems. Dynamic probes or demons provide an event driven means for providing active objects with shared access to resources, and each other, while not violating their security.

  15. Safety evaluation of a hydrogen fueled transit bus

    Energy Technology Data Exchange (ETDEWEB)

    Coutts, D.A.; Thomas, J.K.; Hovis, G.L.; Wu, T.T. [Westinghouse Savannah River Co., Aiken, SC (United States)

    1997-12-31

    Hydrogen fueled vehicle demonstration projects must satisfy management and regulator safety expectations. This is often accomplished using hazard and safety analyses. Such an analysis has been completed to evaluate the safety of the H2Fuel bus to be operated in Augusta, Georgia. The evaluation methods and criteria used reflect the Department of Energy`s graded approach for qualifying and documenting nuclear and chemical facility safety. The work focused on the storage and distribution of hydrogen as the bus motor fuel with emphases on the technical and operational aspects of using metal hydride beds to store hydrogen. The safety evaluation demonstrated that the operation of the H2Fuel bus represents a moderate risk. This is the same risk level determined for operation of conventionally powered transit buses in the United States. By the same criteria, private passenger automobile travel in the United States is considered a high risk. The evaluation also identified several design and operational modifications that resulted in improved safety, operability, and reliability. The hazard assessment methodology used in this project has widespread applicability to other innovative operations and systems, and the techniques can serve as a template for other similar projects.

  16. Perspective Application of Passive Optical Network with Optimized Bus Topology

    Directory of Open Access Journals (Sweden)

    P. Lafata

    2012-06-01

    Full Text Available Passive optical networks (PONs represent a promising solution for modern access telecommunication networks.These networks are able to meet the increasing demands on transmission rate for demanding multimedia services,while they can offer typical shared transmission speed of 1.25 or 2.5 Gbps. The major role in deploying opticaldistribution networks ODNs plays the maximum attenuable loss, which is caused mainly by passive optical splitters.This paper proposes an innovative application of passive optical networks with optimized bus topology especially forlocal backbone data networks. Due to using only passive components, it is necessary to optimize certain parameters,especially an overall attenuation balance. Considering the possibility of such optimization, the passive optical networkwith optimized bus topology provides several interesting opportunities for specific applications. This paper will presentselected aspects of passive optical networks and splitters with asymmetric splitting ratio. The essential part is focusedon the practical demonstration of their use to optimize the passive optical network with bus topology, which acts as alocal backbone network for structured cabling systems, and for local data networks in large buildings.

  17. Designing Parallel Bus Using Universal Asynchronous Receiver Transmitter

    Directory of Open Access Journals (Sweden)

    Satyandra Sharad

    2013-04-01

    Full Text Available This paper entitled “DESIGNING PARALLEL BUSUSING UNIVERSAL ASYNCHRONOUS RECEIVER TRANSMITTER” is designed to the core of a UART interface module, which includes both receive and transmit modules, and the command parser. This paper will be a viable solution to design parallel buses with the help of UART. In the test bench , there is a RFM(register file model to which we write/read back data from just to check our design .The txt file issues serial inputs to the core and the core outputs parallel data and address in the form of bus. This bus is connected to our RFM (register file model instantiated in the test bench along with the design. This makes easy to retrieve parallel data from serial input. The base of the paper is to use microcontroller along with other components to interface with the physical world. In contrast, most serial communication must first be converted back into parallel form by a universal asynchronous receiver/transmitter (UART before they may be directly connected to a data bus. Both Transmissions (Parallel and Serial are used to connect peripheral devices and enable us to communicate with these devices. The UART core described here is designed using VHDL and implemented on Xilinx Vertex FPGA.

  18. An Electric Bus with a Battery Exchange System

    Directory of Open Access Journals (Sweden)

    Jeongyong Kim

    2015-07-01

    Full Text Available As part of the ongoing effort to be independent of petroleum resources and to be free from pollutant emission issues, various electric vehicles have been developed and tested through their integration with real world systems. In the current paper, yet another application specific EV for public transportation, an electric bus, is introduced and explained with results from the pilot test program which was carried out under real traffic conditions. The main feature of the current system is a battery exchanging mechanism mounted on the roof of the bus. The current configuration certainly requires an externally fabricated battery exchanging robot system that would complement the electric bus for a fully automated battery exchanging process. The major advantage of the current system is the quick re-charging of the electric energy through the physical battery exchange and the possible utilization of the battery exchange station as a mini scale energy storage system for grid system peak power shaving. With the total system solution approach for the public transportation system, it is fully expected to create outstanding business opportunities in number of areas such as battery suppliers, battery exchanging station management, battery leasing and many more.

  19. Ring Bus Architecture for a Solid-State Recorder

    Science.gov (United States)

    Walker, W. John; Kopf, Edward; Cox, Brian

    2008-01-01

    A document concisely describes a ring bus architecture for a proposed solid-state recorder (SSR) that would serve as buffer of data to be transmitted from a spacecraft to Earth. This architecture would afford fault tolerance needed for reliable operation in an anticipated high-radiation environment in which traditional SSRs cannot operate reliably. Features of the architecture include one or more controller boards and multiple memory boards interconnected in a ringlike topology. The interconnections would be high-speed serial links complying with the Institute of Electrical and Electronics Engineers (IEEE) standard 1393 (which pertains to a spaceborne fiber-optic data bus). Accordingly, each controller and memory board would be equipped with an IEEE-1393-compliant ring-bus-interface unit. The ringlike topology and the multiplicity of memory boards (and, optionally, of controller boards) would afford the redundancy needed for fault tolerance. Each board would be a fault-containment region. The IEEE 1393 links could be routed so that the SSR would continue to function even in the event of multiple failures. This architecture would also support scalability over a wide range. In a fully redundant configuration, it could accommodate between 1 and 125 memory boards.

  20. The Data Acquisition System Based on PMC Bus

    CERN Document Server

    Igarashi, Y; Higuchi, T; Ikeno, M; Inoue, E; Itoh, R; Kodama, H; Murakami, T; Nagasaka, Y; Nakao, M; Nakayoshi, K; Saitoh, M; Shimazaki, S; Suzuki, S Y; Tanaka, M; Tauchi, K; Varner, G; Yamauchi, M; Yasu, Y; Katayama, T; Watanabe, K; Ishizuka, M; Onozawa, S

    2003-01-01

    High energy physics experiments in KEK/Japan rush into over KHz trigger stage. Thus, we need a successor of the data acquisition(DAQ) system that replaces the CAMAC or FASTBUS systems. To meet these needs, we have developed a DAQ system which includes a crate, base-board modules, daughter cards for front-end A/D or T/D conversion, and back-end communication cards for data transfer and timing control. The size of the crate is for the 9U Euro-cards with the standard VME32 bus and extension connectors for power supply. The base-board comprises of a local bus with the sequencer connected to the front-end daughter cards via event buffering FIFOs, and the standard PMC (PCI mezzanine card) bus to be set a PMC processor unit to reduce data size from the front-end daughter cards. A data transfer module, which is connected to the event building system, and a trigger control unit, which communicates with the central timing controller are installed on the back-end communication card connected to the rear end of the base-...

  1. Bayes and the Law

    Science.gov (United States)

    Fenton, Norman; Neil, Martin; Berger, Daniel

    2016-01-01

    Although the last forty years has seen considerable growth in the use of statistics in legal proceedings, it is primarily classical statistical methods rather than Bayesian methods that have been used. Yet the Bayesian approach avoids many of the problems of classical statistics and is also well suited to a broader range of problems. This paper reviews the potential and actual use of Bayes in the law and explains the main reasons for its lack of impact on legal practice. These include misconceptions by the legal community about Bayes’ theorem, over-reliance on the use of the likelihood ratio and the lack of adoption of modern computational methods. We argue that Bayesian Networks (BNs), which automatically produce the necessary Bayesian calculations, provide an opportunity to address most concerns about using Bayes in the law. PMID:27398389

  2. Life cycle cost analysis of a car, a city bus and an intercity bus powertrain for year 2005 and 2020

    International Nuclear Information System (INIS)

    The international economy, in the beginning of the 20th century, is characterized by uncertainty about the supply and the price of oil. Together with the fast decrease of electrical propulsion component prices, it becomes more and more cost effective to develop vehicles with alternative powertrains. This paper focuses on two questions: Are alternative powertrains especially cost effective for specific applications?; How does an increased fossil fuel price influences the choose of powertrain? To assess these questions, a computer tool named THEPS, developed in a Ph.D. project, is used. Three applications and three scenarios are analysed. The applications, a car, a city bus and an intercity bus, are vehicles all assumed to operate in Sweden. One scenario represents year 2005, the other two year 2020. The two future scenarios are characterized by different fossil fuel prices. The study, presented in the paper, indicates that alternative powertrains can be competitive from a cost perspective, in some applications, already in year 2005. It is for example cost effective to equip a city bus, running in countries with a high fuel price, with a hybrid powertrain. The study also indicates that pure electric, hybrid and/or fuel cell cars will probably be a more cost effective choice than conventional cars in year 2020. Another indication is that it will not be clear which powertrain concept to choose. The reason is that many cost effective powertrain concepts will be offered. The best choice will depend on the application

  3. Bitmap-Wise Wireless M-Bus Coordination for Sustainable Real Time Energy Management

    Directory of Open Access Journals (Sweden)

    Kwang-il Hwang

    2014-07-01

    Full Text Available Even though WM-Bus is being considered to be the most promising network protocol for smart metering, it is not suitable for a sustainable real-time home energy management system (HEMS, which requires higher reliability and longer lifetime despite real time bi-directional communications. Therefore, in this paper we propose a Bitmap-wise WM-Bus (BWM-Bus, coping well with sustainable real-time HEMS. In particular, the proposed scheme addresses the several problems in WM-Bus for HEMS by introducing novel functions: asynchronous meter trigger, adaptive slot scheduling, and bitmap-wise retransmission request. Through experiments, we demonstrate that BWM-Bus guarantees higher data success ratio with lower data aggregation time, as well as longer lifetime than WM-Bus standard.

  4. Identification of voltage stability condition of a power system using measurements of bus variables

    Directory of Open Access Journals (Sweden)

    Durlav Hazarika

    2014-12-01

    Full Text Available Several online methods were proposed for investigating the voltage stability condition of an interconnected power system using the measurements of voltage and current phasors at a bus. For this purpose, phasor measurement units (PMUs are used. A PMU is a device which measures the electrical waves on an electrical network, using a common time source (reference bus for synchronisation. This study proposes a method for online monitoring of voltage stability condition of a power system using measurements of bus variables namely – (i real power, (ii reactive power and (iii bus voltage magnitude at a bus. The measurements of real power, reactive power and bus voltage magnitude could be extracted/captured from a smart energy meter. The financial involvement for implementation of the proposed method would significantly lower compared with the PMU-based method.

  5. Design and VHDL simulation of a special high speed spaceborne bus controller

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    The application of high speed data bus on the satellites having several remote sensors could not only satisfy the demand of high speed data transfer,but also could reuse the equipment at both the com-ponent and subsystem levels for other space missions,thus reducing the costs of on-board processing system integration.In this article,a special high speed data bus with simple interfaces is chosen for transferring the data produced by remote sensors and other instrumentations.First,the function and the structure of the data bus are discussed carefully.And then,the bus controller,which is a key mod-ule of the data bus,is designed.At last,the function and performance of the bus controller are verified by VHDL simulation.

  6. SunLine Transit Agency Advanced Technology Fuel Cell Bus Evaluation: Third Results Reports

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, L.; Chandler, K.

    2012-05-01

    This report describes operations at SunLine Transit Agency for their newest prototype fuel cell bus and five compressed natural gas (CNG) buses. In May 2010, SunLine began operating its sixth-generation hydrogen fueled bus, an Advanced Technology (AT) fuel cell bus that incorporates the latest design improvements to reduce weight and increase reliability and performance. The agency is collaborating with the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) to evaluate the bus in revenue service. NREL has previously published two reports documenting the operation of the fuel cell bus in service. This report provides a summary of the results with a focus on the bus operation from July 2011 through January 2012.

  7. SunLine Transit Agency Advanced Technology Fuel Cell Bus Evaluation: Fourth Results Report

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, L.; Chandler, K.

    2013-01-01

    SunLine Transit Agency, which provides public transit services to the Coachella Valley area of California, has demonstrated hydrogen and fuel cell bus technologies for more than 10 years. In May 2010, SunLine began demonstrating the advanced technology (AT) fuel cell bus with a hybrid electric propulsion system, fuel cell power system, and lithium-based hybrid batteries. This report describes operations at SunLine for the AT fuel cell bus and five compressed natural gas buses. The U.S. Department of Energy's National Renewable Energy Laboratory (NREL) is working with SunLine to evaluate the bus in real-world service to document the results and help determine the progress toward technology readiness. NREL has previously published three reports documenting the operation of the fuel cell bus in service. This report provides a summary of the results with a focus on the bus operation from February 2012 through November 2012.

  8. 75 FR 11837 - Chesapeake Bay Watershed Initiative

    Science.gov (United States)

    2010-03-12

    ... Commodity Credit Corporation Chesapeake Bay Watershed Initiative AGENCY: Commodity Credit Corporation and... program funds for the Chesapeake Bay Watershed Initiative. SUMMARY: The Commodity Credit Corporation (CCC... Watershed Initiative for agricultural producers in the Chesapeake Bay watershed in the States of...

  9. BCDC Bay Trail Alignment 2009

    Data.gov (United States)

    California Department of Resources — The Bay Trail provides easily accessible recreational opportunities for outdoor enthusiasts, including hikers, joggers, bicyclists and skaters. It also offers a...

  10. Best Operational and Maintenance Practices for City Bus Fleets to Maximize Fuel Economy

    OpenAIRE

    World Bank

    2011-01-01

    In most large cities in developing countries, buses continue to be the public transport option of choice, carrying a large share of urban travelers. However, transit bus companies in these countries are often cash-strapped. In many cases, the operating cost per bus kilometer exceeds revenues and bus fares are often kept low irrespective of the cost of providing service. Many cities are dom...

  11. Reducing carbon emissions by introducing electric vehicle enhanced dedicated bus lanes

    OpenAIRE

    Doolan, Ronan; Muntean, Gabriel-Miro

    2014-01-01

    Most cities have special lanes dedicated to buses, however these lanes are rarely used at full capacity. At the same time governments around the world are encouraging people to buy electric vehicles. This paper proposes the creation of electric vehicle enhanced dedicated bus lanes (E-DBL), by allowing electric vehicles access to bus lanes, in order to improve the use of road capacity. By opening bus lanes to electric vehicles, traffic congestion could be eased, the range ...

  12. The impact of bus drivers ’ lifestyle on the occurrence of health problems and absenteeism

    OpenAIRE

    Andrej Jerman; Maja Meško

    2016-01-01

    Research Question: Do bus drivers’ lifestyles affect the occurrence of health problems and absenteeism? Purpose: The purpose of the study was to determine whether the lifestyle of professional bus drivers affects the occurrence of health problems and the phenomenon of absenteeism. Method: A quantitative research method was used in the research. Data were collected using a structured questionnaire, on a sample of 230 professional bus drivers from differ...

  13. The Bus Extension Module Design and Verification of POSAFE-Q Using LVDS

    International Nuclear Information System (INIS)

    This paper described the Bus Extension Module using Low Voltage Differential Signal (LVDS). A Bus Extension Module use Safety-Related PLC (Programmable Logic Controller), called POSAFE-Q (made by POSCO ICT), for handling many data (I/O) extension rack. A processor module of POSAFE-Q can control I/O Module installed another rack. This paper explains Bus Extension Module and Data transfer technology using LVDS. (author)

  14. Introduction to corridor selection & assessment for Bus Rapid Transit System (BRTS) in Hyderabad

    OpenAIRE

    Bhanu Kireeti Chanda; Maddali Sai Satya Goutham

    2014-01-01

    Bus rapid transit system is an innovation and it is up gradation to the present transport system. BRT is affordable, adaptable and cost effective. The term of rapid transit system means a form of high speed urban passenger transportation. Here, the mode of transportation is bus hence it is called as bus rapid transit system (BRTS). Transportation facilities and the system will be different form different countries. Especially for the developing countries, transportation is a problem and BR...

  15. The influence of bus stop on traffic flow with velocity-difference-separation model

    Science.gov (United States)

    Zheng, Pengjun; Wang, Wei; Ge, Hongxia

    2016-06-01

    Based on velocity-difference-separation model, the mixed traffic flow on two-lane road is investigated. For a fixed road length, the influence of bus and bus stops on traffic flow is studied with the increasing traffic density. Compared with the result without bus stops given by Li et al., a new traffic state is found, which is valuable for studying the impacts of public transport on urban traffic flow.

  16. A Prediction System Using a P2P Overlay Network for a Bus Arrival System

    Directory of Open Access Journals (Sweden)

    Ssu-Hsuan Lu

    2014-01-01

    Full Text Available Along with the evolution of times and the surge of metropolitan populations, government agencies often promote the construction of public transport. Unlike rail transportation or rapid transit systems, it is often difficult to estimate the vehicle arrival times at each station in a bus transportation system due to metropolitan transportation congestion. Traffic status is often monitored using wireless sensor networks (WSNs. However, WSNs are always separated from one another spatially. Recent studies have considered the connection of multiple sensor networks. This study considers a combination view of peer-to-peer (P2P overlay networks and WSN architecture to predict bus arrival times. Each bus station, which is also a P2P overlay peer, is connected in a P2P overlay network. A sensor installed in each bus can receive data via peers to obtain the moving speed of a bus. Then, each peer can exchange its data to predict bus arrival times at bus stations. This method can considerably increase the accuracy with which bus arrival times can be predicted and can provide traffic status with high precision. Furthermore, these data can also be used to plan new bus routes according to the information gathered.

  17. Bitmap-Wise Wireless M-Bus Coordination for Sustainable Real Time Energy Management

    OpenAIRE

    Kwang-il Hwang; Sung-wook Nam

    2014-01-01

    Even though WM-Bus is being considered to be the most promising network protocol for smart metering, it is not suitable for a sustainable real-time home energy management system (HEMS), which requires higher reliability and longer lifetime despite real time bi-directional communications. Therefore, in this paper we propose a Bitmap-wise WM-Bus (BWM-Bus), coping well with sustainable real-time HEMS. In particular, the proposed scheme addresses the several problems in WM-Bus for HEMS by introdu...

  18. An interactive wireless communication system for visually impaired people using city bus transport.

    Science.gov (United States)

    Wang, Hsiao-Lan; Chen, Ya-Ping; Rau, Chi-Lun; Yu, Chung-Huang

    2014-05-01

    Visually impaired people have difficulty accessing information about public transportation systems. Several systems have been developed for assisting visually impaired and blind people to use the city bus. Most systems provide only one-way communication and require high-cost and complex equipment. The purpose of this study is to reduce the difficulties faced by visually impaired people when taking city buses, using an interactive wireless communication system. The system comprised a user module and a bus module to establish a direct one-to-one connection. When the user inputs 4-digit numbers, the user module immediately sends out the information. If the bus module receives the matched bus number, it buzzes and the warning LED flashes to notify the bus driver that someone is waiting to board on the bus. User tests were conducted by two visually impaired people in a simulated vehicle and a city bus. The success rate of interactive wireless communication, recognizing the arrival of the bus and boarding the correct bus reached 100% in all of the tests. The interactive wireless communication aid system is a valid and low-cost device for assisting visually impaired people to use city buses.

  19. BC Transit Fuel Cell Bus Project Evaluation Results: Second Report

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, L.; Post, M.

    2014-09-01

    Second report evaluating a fuel cell electric bus (FCEB) demonstration led by British Columbia Transit (BC Transit) in Whistler, Canada. BC Transit is collaborating with the California Air Resources Board and the U.S. Department of Energy's National Renewable Energy Laboratory to evaluate the buses in revenue service. NREL published its first report on the demonstration in February 2014. This report is an update to the previous report; it covers 3 full years of revenue service data on the buses from April 2011 through March 2014 and focuses on the final experiences and lessons learned.

  20. Fuel options for public bus fleets in Sweden

    OpenAIRE

    Xylia, Maria; Silveira, Semida

    2015-01-01

    The Swedish public transport sector has defined two major targets, i.e., to run 90% of the total vehicle kilometers of the fleet on non-fossil fuels and double the volume of travel via public transport by 2020, increasing the share of public transport in relation to the total personal transport in the country . The f3 report Fuel options for public bus fleets in Sweden highlights the challenges and solutions encountered, particularly when it comes to the adoption of renewable fuels in the reg...

  1. Communication Architecture Synthesis for Multi-bus SoC

    Directory of Open Access Journals (Sweden)

    Abdelkrim Zitouni

    2006-01-01

    Full Text Available In the systems on chip (SoC design, the synthesis of communication architecture constitutes the bottleneck which can affect the performances of the system. Various schemes and protocols can be necessary, just as various topologies of interconnection. To reduce the complexity of the communications refinement, we present in this study a model and a synthesis approach for multi-bus communication architecture containing centralized bridge. The automation of the arbiter synthesis step profited from a detailed attention. This stage generates a hierarchical arbiter integrating various priority arbitration modules. The proposed approach was integrated in a toolbox based environment

  2. Energy model of network-on-chip and a bus

    OpenAIRE

    Wolkotte, Pascal T.; Smit, Gerard J.M.; Kavaldjiev, Nikolay; Becker, Jens E.; Becker, Jurgen

    2005-01-01

    A Network-on-Chip (NoC) is an energy-efficient onchip communication architecture for Multi-Processor Systemon- Chip (MPSoC) architectures. In earlier papers we proposed two Network-on-Chip architectures based on packet-switching and circuit-switching. In this paper we derive an energy model for both NoC architectures to predict their energy consumption per transported bit. Both architectures are also compared with a traditional bus architecture. The energy model is primarily needed to find a ...

  3. Energy Model of Networks-on-Chip and a Bus

    OpenAIRE

    Wolkotte, Pascal T.; Smit, Gerard J.M.; Kavaldjiev, Nikolay; Becker, Jens E.; Becker, Jürgen

    2005-01-01

    A Network-on-Chip (NoC) is an energy-efficient onchip communication architecture for Multi-Processor Systemon-Chip (MPSoC) architectures. In earlier papers we proposed two Network-on-Chip architectures based on packet-switching and circuit-switching. In this paper we derive an energy model for both NoC architectures to predict their energy consumption per transported bit. Both architectures are also compared with a traditional bus architecture. The energy model is primarily needed to find a n...

  4. DC Bus Regulation with a Flywheel Energy Storage System

    Science.gov (United States)

    Kenny, Barbara H.; Kascak, Peter E.

    2003-01-01

    This paper describes the DC bus regulation control algorithm for the NASA flywheel energy storage system during charge, charge reduction and discharge modes of operation. The algorithm was experimentally verified with results given in a previous paper. This paper presents the necessary models for simulation with detailed block diagrams of the controller algorithm. It is shown that the flywheel system and the controller can be modeled in three levels of detail depending on the type of analysis required. The three models are explained and then compared using simulation results.

  5. Distributed Data Acquisition and Control by Software Bus

    Institute of Scientific and Technical Information of China (English)

    Cecil Bruce-Boye; Dmitry A. Kazakov

    2004-01-01

    Increasing global competition forces manufacturers of products from all technical fields to guarantee a high product quality for a long period of time. At the same time it is necessary to minimize production costs. In order to meet all these requirements, on-line data acquisition and processing are of increasing importance in distributed automation systems. A software bus operating on industrial Ethernet has an ability to minimize operating costs by offering easy installation, scalability,high degree of reliability and remote monitoring and control.

  6. Bus Stops, Bus stops created from hard copy CAT transit maps. Includes information on if there is a shelter present or not., Published in 2010, 1:4800 (1in=400ft) scale, City of Bismarck.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Bus Stops dataset, published at 1:4800 (1in=400ft) scale, was produced all or in part from Hardcopy Maps information as of 2010. It is described as 'Bus stops...

  7. 75 FR 29891 - Special Local Regulation; Maggie Fischer Memorial Great South Bay Cross Bay Swim, Great South Bay...

    Science.gov (United States)

    2010-05-28

    ... Swim, Great South Bay, NY, in the Federal Register (74 FR 32428). We did not receive any comments or... published at 74 FR 32428 on July 8, 2009, is adopted as a final rule with the following changes: PART 100... South Bay Cross Bay Swim, Great South Bay, NY AGENCY: Coast Guard, DHS. ACTION: Final rule. SUMMARY:...

  8. Relay protection and substation automation of modern EHV power systems, experience and impact of the new process bus (IEC61850-9-2)

    Energy Technology Data Exchange (ETDEWEB)

    Tholomier, D.; Hossenlopp, L. [Areva T and D Automation Canada Inc., Monteal, PQ (Canada)

    2007-07-01

    Montreal-based Areva T and D is currently running 3 pilot projects with major transmission utilities to confirm the use of the process busbar (IEC 61850-9-2) in Europe and North America to improve the global reliability and significantly reduce the costs of full IEC 61850 substation. The impact of the merging unit on non-conventional and conventional instrument transformers was discussed along with technical solutions and the processing of several busbar voltage references simultaneously. The performance of the new device was compared to previous ones in terms of response time, dependability and cost considerations. The overall substation architecture when using the process busbar was reviewed with reference to time synchronization; mix of bay technologies; implementation and robustness to change of distributed process bus functions; and, engineering impact.

  9. Bayes Multiple Decision Functions

    CERN Document Server

    Wu, Wensong

    2011-01-01

    This paper deals with the problem of simultaneously making many (M) binary decisions based on one realization of a random data matrix X. M is typically large and X will usually have M rows associated with each of the M decisions to make, but for each row the data may be low dimensional. A Bayesian decision-theoretic approach for this problem is implemented with the overall loss function being a cost-weighted linear combination of Type I and Type II loss functions. The class of loss functions considered allows for the use of the false discovery rate (FDR), false nondiscovery rate (FNR), and missed discovery rate (MDR) in assessing the decision. Through this Bayesian paradigm, the Bayes multiple decision function (BMDF) is derived and an efficient algorithm to obtain the optimal Bayes action is described. In contrast to many works in the literature where the rows of the matrix X are assumed to be stochastically independent, we allow in this paper a dependent data structure with the associations obtained through...

  10. Bus Stops, Maryland Transit Administration Local and Commuter Bus Stops, Published in 2013, 1:24000 (1in=2000ft) scale, Maryland Transit Administration.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Bus Stops dataset, published at 1:24000 (1in=2000ft) scale, was produced all or in part from Other information as of 2013. It is described as 'Maryland Transit...

  11. Bus Routes, This shapefile contains lines that follow the path of the existing bus routes, Published in 2006, Charlotte Area Transit System.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Bus Routes dataset, was produced all or in part from Other information as of 2006. It is described as 'This shapefile contains lines that follow the path of...

  12. UNIVERSALIZATION OF BUS BODY FACING DETAILS AND PRODUCTION TOOLING FOR THEIR MANUFACTURING

    Directory of Open Access Journals (Sweden)

    M. Taranenko

    2009-01-01

    Full Text Available The directions concerning bus body production costs reduction based on large-size facing details stamping on electric-hydraulic presses are considered. The engineering of unified large-size facing detail blanks, manufacturing processes and variants of unified technological tooling for bus body facing details production, including simple- or multi-type details are described.

  13. 49 CFR 571.131 - Standard No. 131; School bus pedestrian safety devices.

    Science.gov (United States)

    2010-10-01

    ... devices. S1. Scope. This standard establishes requirements for devices that can be installed on school... a stopped school bus and striking pedestrians in the vicinity of the bus. S3. Application. This standard applies to school buses other than multifunction school activity buses. S4. Definitions....

  14. Evoking Emotions and Unpacking Layered Histories through Young Children's Illustrations of Racial Bus Segregation

    Science.gov (United States)

    Kuby, Candace R.

    2013-01-01

    Drawing on theories of multi-modality and critical visual literacy, this article focuses on images that five-and six year-olds painted in a class-made book, Voice on the Bus, about racial segregation. The article discusses how children used illustrations to convey their understandings of Rosa Parks' bus arrest in Alabama. A post-structural view…

  15. Reducing transit bus emissions: Alternative fuels or traffic operations?

    Science.gov (United States)

    Alam, Ahsan; Hatzopoulou, Marianne

    2014-06-01

    In this study, we simulated the operations and greenhouse gas (GHG) emissions of transit buses along a busy corridor and quantified the effects of two different fuels (conventional diesel and compressed natural gas) as well as a set of driving conditions on emissions. Results indicate that compressed natural gas (CNG) reduces GHG emissions by 8-12% compared to conventional diesel, this reduction could increase to 16% with high levels of traffic congestion. However, the benefits of switching from conventional diesel to CNG are less apparent when the road network is uncongested. We also investigated the effects of bus operations on emissions by applying several strategies such as transit signal priority (TSP), queue jumper lanes, and relocation of bus stops. Results show that in congested conditions, TSP alone can reduce GHG emissions by 14% and when combined with improved technology; a reduction of 23% is achieved. The reduction benefits are even more apparent when other transit operational improvements are combined with TSP. Finally a sensitivity analysis was performed to investigate the effect of operational improvements on emissions under varying levels of network congestion. We observe that under “extreme congestion”, the benefits of TSP decrease.

  16. Genetic algorithm for optimization in adaptive bus signal priority control

    Directory of Open Access Journals (Sweden)

    Tran Vu TU

    2013-01-01

    Full Text Available This paper firstly proposes an improved genetic algorithm (GA for optimization in adaptive bus signal priority control at signalized intersections. Unlike conventional genetic algorithms with slow convergence speed, this algorithm can increase the convergence speed by utilizing the compensation rule between consecutive signal cycles to narrow new possible generated population spaces. Secondly, the paper would like to present a way to apply the algorithm to a simple adaptive bus signal priority control as well as compare how much the computation time is saved when applying the improved algorithm. Then the research thirdly investigates the efficiency of the proposed algorithm under various flow rate situations. The results show that the improved genetic algorithm can reduce the computation time considerably, by up to 48.39% for the studied case. With high saturation degrees on the cross street, the convergence rate performance of the improved genetic algorithm is significantly good. The figure can be up to 36.2% when compared with the convergence rate of the conventional GA.

  17. Bus Rapid Transit (BRT System Impacts to Environmental Quality

    Directory of Open Access Journals (Sweden)

    Mojtaba Shojaei Baghini

    2014-02-01

    Full Text Available The aim of this research is to examine the mechanism and performance of Bus Rapid Transit (BRT system and its impacts on environment quality. Environment quality is an indicator of regional quality of life, supporting the health and well-being of the public and sustainability of the urban and natural environment. Transit agencies are adopting vehicles with alternative fuels, propulsion systems and pollutant emissions controls. One of the ways to improve the transportation environment is through the reduction of BRT emissions to improve air quality. The primary advantage of Bus Rapid Transit (BRT system is that it can be adapted to a multitude of operating environments, with sufficient scalability to deliver increased carrying capacity to meet future ridership growth. Moreover, the system will also likely reduce overall the noise levels by determining suitable noise management systems. The paper finds that a BRT system offers the greatest potential for greenhouse gas reductions primarily because BRT vehicles generally offer lower CO2 emissions per passenger mile than other transportation system.

  18. CERPEN FARUK “BUS KOTA” DALAM SEMIOTIK ROLAND BARTHES

    Directory of Open Access Journals (Sweden)

    Ken Widyatwati

    2016-04-01

    Full Text Available Literature called beautiful if it contains the mandate, message, ideas and meanings that are useful for the readers. Short story “Bus Kota” (City Bus containing the mandate, message, ideas and meanings that are useful to the reader. The mandate will be revealed by Roland Barthes' semiotic theory in the book S/Z. Literature has its own allure and text have accrued but not due to independence because of the difference in quality. Texts merge into a unity, or restore any text not as an individual but as a form of plurality. Literature as part of a social system is an expression of the author's sense of the outpouring of public life. Literary works can express themselves in the author's view the social and cultural changes in society because of the development of information technology and rapid. Technological developments and socio-cultural information can change in society so as to affect the psychology of the people. Society must have a thickness of faith not only for themselves, but to be able to maintain equanimity in the life of a pluralistic society

  19. Development of an integrated cryogenic bus for spacecraft applications

    Science.gov (United States)

    Bugby, David C.; Brennan, Patrick J.; Davis, Thomas M.; Tomlinson, Joe; Stoyanof, Marko; Crawford, Larry; Glaister, David S.

    1997-01-01

    To improve the efficiency and reduce the overdesign penalties associated with integrating cryogenic systems into spacecraft, the Integrated Cryogenic Bus (ICB) program was initiated in April 1996. The technical objectives of the program were to develop an integrated, lightweight means of thermally linking a cryogenic cooling source to a cooled satellite component, to commonize the interfaces to the cooling source and cooled component, and to commonize the integration of these systems into spacecraft. The technical plan involves several steps beginning with the definition of requirements, the identification and characterization of potential bus components, the development of new concepts and optimization methods, breadboard testing, and prototype development. Six months into the program, over 25 cryocooler, focal plane, and cryogenic hardware organizations have been interviewed or surveyed to identify requirements, numerous components have been identified and characterized, several preliminary concepts have been developed, an optimization plan has been outlined, and critical breadboard tests have begun. This paper summarizes the progress to date during Phase I of this Phillips Laboratory program funded by the Ballistic Missile Defense Organization (BMDO).

  20. Bus Implementation Using New Low Power PFSCL Tristate Buffers

    Directory of Open Access Journals (Sweden)

    Neeta Pandey

    2016-01-01

    Full Text Available This paper proposes new positive feedback source coupled logic (PFSCL tristate buffers suited to bus applications. The proposed buffers use switch to attain high impedance state and modify the load or the current source section. An interesting consequence of this is overall reduction in the power consumption. The proposed tristate buffers consume half the power compared to the available switch based counterpart. The issues with available PFSCL tristate buffers based bus implementation are identified and benefits of employing the proposed tristate buffer topologies are put forward. SPICE simulation results using TSMC 180 nm CMOS technology parameters are included to support the theoretical formulations. The performance of proposed tristate buffer topologies is examined on the basis of propagation delay, output enable time, and power consumption. It is found that one of the proposed tristate buffer topology outperforms the others in terms of all the performance parameters. An examination of behavior of available and the proposed PFSCL tristate buffer topologies under parameter variations and mismatch shows a maximum variation of 14%.

  1. Studying customer loyalty at Daewoo express bus service, Pakistan

    Directory of Open Access Journals (Sweden)

    Usman Yousaf

    2013-09-01

    Full Text Available Background: Meeting service quality standards and striving for loyalty are two critical areas which have until now been overlooked by both the passenger transport industry and academia in Pakistan therefore the study sheds useful light on an issue hitherto untouched. Therefore increased sample size will help in increasing generalizability of study. Methods: This paper is designed to study the level of loyalty at Daewoo Express Bus Service in Sargodha by measuring customer satisfaction. Researchers used a small sample of only 96 respondents (passengers and only studies customer's behavior in the service quality of Daewoo Express Bus Service however it may differ in other passenger transport services. Results and conclusions: This paper reveals that there is a positive and significant relationship between loyalty (dependant variable and price perceptions, reliability, retrieving and smoothing (independent variables. However, the study found that reliability of services is the most important dimension among other independent variables (price perceptions, smoothing, reliability, retrieving effecting customers loyalty at Daewoo Express. Paper under consideration would surely assist Daewoo`s management team to take care of the loopholes existing in the current service level and likely threats which Daewoo might face.

  2. 76 FR 38020 - Safety Zone; Bay Point Fireworks, Bay Point Marina; Marblehead, OH

    Science.gov (United States)

    2011-06-29

    ... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone; Bay Point Fireworks, Bay Point Marina... transit or anchor in a portion of the Lake Erie, Bay Point Marina; Marblehead, OH between 10 p.m. and 10... Zone; Bay Point Fireworks, Bay Point Marina; Marblehead, OH. (a) Location. The following area is...

  3. Study on the optimum design of bus window pillar join40t; Bus window pillar ketsugo buzai no saiteki sekkei ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Tomioka, N. [Nihon University, Tokyo (Japan); Lim, S.; Kim, M.; Lee, H.; Kang, S.; Bae, D.

    1997-10-01

    Automobile body structure is generally assembled using various spot welded box sectional members. Especially, in the case of the bus, the shape of window pillar joint is assembled m T-type. This T-type member has some problem such as high stress concentration, low fatigue strength and structural rigidity. Therefore, in this report, performed a study on the optimum design of the bus window pillar joint for such problem by FEM analysis and experiments. 1 ref., 10 figs., 2 tabs.

  4. A Study of BUS Architecture Design for Controller of Nuclear Power Plant Using FPGA

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Dongil; Yun, Donghwa; Hwang, Sungjae; Kim, Myeongyun; Lee, Dongyun [PONUTech Co. Ltd., Seoul (Korea, Republic of)

    2014-05-15

    CPU (Central Processing Unit) operating speed and communication rate have been more technically improved than before. However, whole system is been a degradation of performance by electronic and structural limitation of parallel bus. Transmission quantity and speed have a limit and need arbiter in order to do arbitration because several boards shared parallel bus. Arbiter is a high complexity in implementing so it increases component per chip. If a parallel bus uses, it will occurs some problems what are reflection noise, power/ground noise (or ground bounce) as SSN (Simultaneous Switching Noise) and crosstalk noise like magnetic coupling. In this paper, in order to solve a problem of parallel bus in controller of NPP (Nuclear Power Plant), proposes the bus architecture design using FPGA (Field Programmable Gate Array) based on LVDS (Low Voltage Differential Signaling)

  5. SunLine Transit Agency Advanced Technology Fuel Cell Bus Evaluation: Second Results Report and Appendices

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, L.; Chandler, K.

    2011-10-01

    This report describes operations at SunLine Transit Agency for their newest prototype fuel cell bus and five compressed natural gas (CNG) buses. In May 2010, SunLine began operating its sixth-generation hydrogen fueled bus, an Advanced Technology (AT) fuel cell bus that incorporates the latest design improvements to reduce weight and increase reliability and performance. The agency is collaborating with the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) to evaluate the bus in revenue service. This is the second results report for the AT fuel cell bus since it was placed in service, and it focuses on the newest data analysis and lessons learned since the previous report. The appendices, referenced in the main report, provide the full background for the evaluation. They will be updated as new information is collected but will contain the original background material from the first report.

  6. Bayes multiple decision functions.

    Science.gov (United States)

    Wu, Wensong; Peña, Edsel A

    2013-01-01

    This paper deals with the problem of simultaneously making many (M) binary decisions based on one realization of a random data matrix X. M is typically large and X will usually have M rows associated with each of the M decisions to make, but for each row the data may be low dimensional. Such problems arise in many practical areas such as the biological and medical sciences, where the available dataset is from microarrays or other high-throughput technology and with the goal being to decide which among of many genes are relevant with respect to some phenotype of interest; in the engineering and reliability sciences; in astronomy; in education; and in business. A Bayesian decision-theoretic approach to this problem is implemented with the overall loss function being a cost-weighted linear combination of Type I and Type II loss functions. The class of loss functions considered allows for use of the false discovery rate (FDR), false nondiscovery rate (FNR), and missed discovery rate (MDR) in assessing the quality of decision. Through this Bayesian paradigm, the Bayes multiple decision function (BMDF) is derived and an efficient algorithm to obtain the optimal Bayes action is described. In contrast to many works in the literature where the rows of the matrix X are assumed to be stochastically independent, we allow a dependent data structure with the associations obtained through a class of frailty-induced Archimedean copulas. In particular, non-Gaussian dependent data structure, which is typical with failure-time data, can be entertained. The numerical implementation of the determination of the Bayes optimal action is facilitated through sequential Monte Carlo techniques. The theory developed could also be extended to the problem of multiple hypotheses testing, multiple classification and prediction, and high-dimensional variable selection. The proposed procedure is illustrated for the simple versus simple hypotheses setting and for the composite hypotheses setting

  7. USGS Tampa Bay Pilot Study

    Science.gov (United States)

    Yates, K.K.; Cronin, T. M.; Crane, M.; Hansen, M.; Nayeghandi, A.; Swarzenski, P.; Edgar, T.; Brooks, G.R.; Suthard, B.; Hine, A.; Locker, S.; Willard, D.A.; Hastings, D.; Flower, B.; Hollander, D.; Larson, R.A.; Smith, K.

    2007-01-01

    Many of the nation's estuaries have been environmentally stressed since the turn of the 20th century and will continue to be impacted in the future. Tampa Bay, one the Gulf of Mexico's largest estuaries, exemplifies the threats that our estuaries face (EPA Report 2001, Tampa Bay Estuary Program-Comprehensive Conservation and Management Plan (TBEP-CCMP)). More than 2 million people live in the Tampa Bay watershed, and the population constitutes to grow. Demand for freshwater resources, conversion of undeveloped areas to resident and industrial uses, increases in storm-water runoff, and increased air pollution from urban and industrial sources are some of the known human activities that impact Tampa Bay. Beginning on 2001, additional anthropogenic modifications began in Tampa Bat including construction of an underwater gas pipeline and a desalinization plant, expansion of existing ports, and increased freshwater withdrawal from three major tributaries to the bay. In January of 2001, the Tampa Bay Estuary Program (TBEP) and its partners identifies a critical need for participation from the U.S. Geological Survey (USGS) in providing multidisciplinary expertise and a regional-scale, integrated science approach to address complex scientific research issue and critical scientific information gaps that are necessary for continued restoration and preservation of Tampa Bay. Tampa Bay stakeholders identified several critical science gaps for which USGS expertise was needed (Yates et al. 2001). These critical science gaps fall under four topical categories (or system components): 1) water and sediment quality, 2) hydrodynamics, 3) geology and geomorphology, and 4) ecosystem structure and function. Scientists and resource managers participating in Tampa Bay studies recognize that it is no longer sufficient to simply examine each of these estuarine system components individually, Rather, the interrelation among system components must be understood to develop conceptual and

  8. Back Bay Wilderness area description

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document is a description of the lands located within the Back Bay National Wildlife Refuge. Within these lands, it designates which area is suitable for...

  9. Annual report, Bristol Bay, 1955

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Commercial fishery management activities for Bristol Bay for 1955, including lists of operators, extensive statistics, descriptions of enforcement activities, and...

  10. FL BAY SPECTROUT-DIET

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Juvenile spotted seatrout and other sportfish are being monitored annually over a 6-mo period in Florida Bay to assess their abundance over time relative to...

  11. Lavaca Bay 1985-1987

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Samples were collected from October 15, 1985 through June 12, 1987 in emergent marsh and non-vegetated habitats throughout the Lavaca Bay system to characterize...

  12. Wind farm protection using an IEC 61850 process bus architecture

    Energy Technology Data Exchange (ETDEWEB)

    McGinn, D. [GE Digital Energy, Toronto, ON (Canada)

    2009-07-01

    This presentation discussed wind farm protection using an IEC 61850 process bus architecture. Data is transmitted via IEC 61850 messages over a fiber optic communications network to a central relaying unit (CRU) that executes protection and control (P and C) functions for a whole wind farm. The presentation also discussed the need to further simplify P and C design. Challenges of wind farm protection include physical distance; relay location; and selectivity/isolation. P and C hardware evolution was illustrated and its advantages were presented. These included one relay to set, configure, test, and maintain; eliminate the need for transfer trips; free monitoring; free disturbance recording; and easy integration of data. The development of commercially available systems began around 1990 with the IPACS system developed by Hydro One, and the SIPSUR system developed in Spain. 7 figs.

  13. Design and Analysis of Bus Front Panel Usin G FRP

    Directory of Open Access Journals (Sweden)

    G. Adinarayana

    2014-10-01

    Full Text Available Recently, Advance composite materials have taken the significant share with other engineering materials due to its mechanical properties and high strength to weight ratio. Advance composite like E-glass, S-glass, Carbon fiber, Kevlar are not yet confined at the aerospace industry but gradually these are taking over the position of other industries as well. Because of its attaining high intricacy in designing factors and as well as cheaper mould design and also less cost in production of few numbers. The applications of FRPs are spirally increasing. The aim of this project is to develop a BUS FRONT PANEL with a help of FRPs in order to sustain all the mechanical properties which are equivalent to the metals with the help of advanced computer aided software designs like ANSYS. In computer aided engineering to make the product proven in the realistic market.

  14. FAKTOR PENYEBAB KERUSAKAN SISTEM MESIN PADA BUS APTB PPD

    Directory of Open Access Journals (Sweden)

    Laela Chairani

    2015-06-01

    Full Text Available Comfort and safety of public transportation, particularly APTB PPD buses, becomes high expectations for its customers. Those expectations must be supported by the application of a good engine maintenance system. By using the method of Reliability Centered Maintenance may be determined appropriate actions to mitigate damage. From the analysis known the failures of the APTB PPD bus are malfunctions of the fuel engine, power transfer systems, difficulty to move the gear lever, and lubricating system for the rough engine noise. The cause of engine malfunction is dirty diesel filter, vehicle acceleration malfunction is due to the clutch plate wear out. Difficulty to move the gear lever indicates that the clutch slips. Rough engine noise caused by the flow of oil to the engine stalled as the result of dirty oil filter. The results of the logic tree analysis show that for each failure requires scheduling of time directed task.

  15. Characterisation of vibration input to flywheel used on urban bus

    Science.gov (United States)

    Wang, L.; Kanarachos, S.; Christensen, J.

    2016-09-01

    Vibration induced from road surface has an impact on the durability and reliability of electrical and mechanical components attached on the vehicle. There is little research published relevant to the durability assessment of a flywheel energy recovery system installed on city and district buses. Relevant international standards and legislations were reviewed and large discrepancy was found among them, in addition, there are no standards exclusively developed for kinetic energy recovery systems on vehicles. This paper describes the experimentation of assessment of road surface vibration input to the flywheel on a bus as obtained at the MIRA Proving Ground. Power density spectra have been developed based on the raw data obtained during the experimentation. Validation of this model will be carried out using accelerated life time tests that will be carried out on a shaker rig using an accumulated profile based on the theory of fatigue damage equivalence in time and frequency domain aligned with the model predictions.

  16. DESIGN OF TRANSITION TIME ADJUSTMENT TECHNIQUE FOR REDUCING BUS DELAY EFFECTS ON NOC INTERCONNECTS

    Directory of Open Access Journals (Sweden)

    MEERA K S

    2013-04-01

    Full Text Available To meet the growing computation-intensive applications the number of computing resources in single-chip has enormously increased, because current VLSI technology can support such an extensive integration of transistors. By adding many computing resources such as CPU, DSP, specific IPs, etc to build a system in System-on-Chip, its interconnection between each other becomes another challenging issue. In most System-on-Chip applications, a shared bus interconnection which needs arbitration logic to serialize several bus access requests, is adopted to communicate with each integrated processing unit because of its low-cost and simple control characteristics. However, such shared bus interconnection has some limitation in its scalability because only one master at a time can utilize the bus which means all the bus accesses should be serialized by the arbitrator. Therefore, in such an environment where the number of bus requesters is large and their required bandwidth for interconnection is more than the current bus, some other interconnection methods should be considered. Such scalable bandwidth requirement can be satisfied by using on-chip packet-switched micro-network of interconnects, generally known as Network-on-Chip (NoC architecture. It suffers however from increasingly serious interconnect crosstalk effects, which constrain the overall performance of NOC systems. In this paper some delay tolerance methods are proposed.

  17. Implementation of an AMBA Advanced High Performance Bus protocol IP block

    Directory of Open Access Journals (Sweden)

    Mahendra Vucha Sandeep Magarde

    2011-08-01

    Full Text Available The design of an AMBA advanced high performance bus (AHB protocol IP block is presented in this paper. The AHB (Advanced High-performance Bus is a high-performance bus in AMBA (Advanced Microcontroller Bus Architecture family. This AHB can be used in high clock frequency system modules. The AHB acts as the high-performance system backbone bus. AHB supports the efficient connection of processors, on-chip memories and off-chip external memory interfaces with low-power peripheral macro cell functions. In this work, the design of the Advanced High-Performance Bus Protocol is developed which has the basic blocks such as Master and Slave. The arbitration mechanism is used to ensure that only one master has access to the bus at any one time and the AHB decoder is used to decode the address of each transfer and provide a select signal for the slave that is involved in the transfer. This AMBA-AHB protocol can be adopted in all the application provided the design should be an AHB compliant.

  18. COMPARISON OF PARALLEL AND SERIES HYBRID POWERTRAINS FOR TRANSIT BUS APPLICATION

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Zhiming [ORNL; Daw, C Stuart [ORNL; Smith, David E [ORNL; Jones, Perry T [ORNL; LaClair, Tim J [ORNL; Parks, II, James E [ORNL

    2016-01-01

    The fuel economy and emissions of both conventional and hybrid buses equipped with emissions aftertreatment were evaluated via computational simulation for six representative city bus drive cycles. Both series and parallel configurations for the hybrid case were studied. The simulation results indicate that series hybrid buses have the greatest overall advantage in fuel economy. The series and parallel hybrid buses were predicted to produce similar CO and HC tailpipe emissions but were also predicted to have reduced NOx tailpipe emissions compared to the conventional bus in higher speed cycles. For the New York bus cycle (NYBC), which has the lowest average speed among the cycles evaluated, the series bus tailpipe emissions were somewhat higher than they were for the conventional bus, while the parallel hybrid bus had significantly lower tailpipe emissions. All three bus powertrains were found to require periodic active DPF regeneration to maintain PM control. Plug-in operation of series hybrid buses appears to offer significant fuel economy benefits and is easily employed due to the relatively large battery capacity that is typical of the series hybrid configuration.

  19. Air flow through a non-airconditioned bus with open windows

    Indian Academy of Sciences (India)

    S R Kale; S V Veeravalli; H D Punekar; M M Yelmule

    2007-08-01

    Open window buses without air-conditioning are a major mode of urban and inter-city transport in most countries. High occupancy combined with hot and humid conditions makes travel in these buses quite uncomfortable. In this study air flow through a bus has been studied that could be the basis for low cost and ecofriendly methods of increasing passenger comfort and possibly reduce drag. The aerodynamics of such a road vehicle has not been studied as previous investigations have been confined to vehicles with closed windows that present a smooth exterior to air flow. Using a 1:25 scaled Perspex model of an urban bus in Delhi, flow visualization was performed in a water channel. The Reynolds numbers were onetenth of a real bus moving at $10 m/s$. Smoke and tuft visualizations were also performed on an urban bus at 40 km/h. Numerical simulations were performed at the actual Reynolds number. Even though there were Reynolds number differences, the broad features were similar. Air enters the bus from the rear windows, moves to the front (relative to the bus) and exits from the front windows. Inside air velocity relative to the bus is about one-tenth of the free-stream velocity. The flow is highly three-dimensional and unsteady.

  20. Autonomous Navigation and Obstacle Avoidance of a Micro-bus

    Directory of Open Access Journals (Sweden)

    Carlos Fernández

    2013-04-01

    Full Text Available At present, the topic of automated vehicles is one of the most promising research areas in the field of Intelligent Transportation Systems (ITS. The use of automated vehicles for public transportation also contributes to reductions in congestion levels and to improvements in traffic flow. Moreover, electrical public autonomous vehicles are environmentally friendly, provide better air quality and contribute to energy conservation. The driverless public transportation systems, which are at present operating in some airports and train stations, are restricted to dedicated roads and exhibit serious trouble dynamically avoiding obstacles in the trajectory. In this paper, an electric autonomous mini-bus is presented. All datasets used in this article were collected during the experiments carried out in the demonstration event of the 2012 IEEE Intelligent Vehicles Symposium that took place in Alcalá de Henares (Spain. The demonstration consisted of a route 725 metres long containing a list of latitude-longitude points (waypoints. The mini-bus was capable of driving autonomously from one waypoint to another using a GPS sensor. Furthermore, the vehicle is provided with a multi-beam Laser Imaging Detection and Ranging (LIDAR sensor for surrounding reconstruction and obstacle detection. When an obstacle is detected in the planned path, the planned route is modified in order to avoid the obstacle and continue its way to the end of the mission. On the demonstration day, a total of 196 attendees had the opportunity to get a ride on the vehicles. A total of 28 laps were successfully completed in full autonomous mode in a private circuit located in the National Institute for Aerospace Research (INTA, Spain. In other words, the system completed 20.3 km of driverless navigation and obstacle avoidance.

  1. Entangling a Series of Trapped Ions by Moving Cavity Bus

    Institute of Scientific and Technical Information of China (English)

    ZHANG Miao; JIA Huan-Yu; WEI Lian-Fu

    2011-01-01

    Entangling multiple qubits is one of the central tasks of quantum information processing. We propose an approach to entangle a number of cold ions (individually trapped in a string of microtraps) by a moved cavity. The cavity is pushed to include the ions one by one with a uniform velocity and thus the information stored in former ions could be transferred to the latter ones by such a moving cavity bus. Since the positions of the trapped ions are precisely located, the strengths and durations of the ion-cavity interactions can be exactly controlled. As a consequence, by properly setting the relevant parameters, typical multi-ion entangled states, e.g., W state for 10 ions, could be deterministically generated. The feasibility of the proposal is also discussed.%@@ Entangling multiple qubits is one of the central tasks of quantum information processing.We propose an approach to entangle a number of cold ions (individually trapped in a string of microtraps) by a moved cavity.The cavity is pushed to include the ions one by one with a uniform velocity and thus the information stored in former ions could be transferred to the latter ones by such a moving cavity bus.Since the positions of the trapped ions are precisely located, the strengths and durations of the ion-cavity interactions can be exactly controlled.As a consequence, by properly setting the relevant parameters, typical multi-ion entangled states, e.g., W state for 10 ions, could be deterministically generated.The feasibility of the proposal is also discussed.

  2. On the road : non-fossil fuel deployment for the public bus fleet of Sweden

    OpenAIRE

    Xylia, Maria; Silveira, Semida

    2015-01-01

    The public transport sector in Sweden has set a target to run 90% of its total vehicle-kilometers on renewable fuels by 2020, and double its market share in the long term. The focus of this paper is the adoption of renewable fuels in public bus fleets. Data for all 21 Swedish counties were gathered and analyzed, mapping the bus fleets’ condition in relation to renewable fuel deployment, CO2 emissions and energy efficiency. The main factors affecting fuel choices in the bus fleets were investi...

  3. Connecticut Transit (CTTRANSIT) Fuel Cell Transit Bus: Third Evaluation Report and Appendices

    Energy Technology Data Exchange (ETDEWEB)

    Chandler, K.; Eudy, L.

    2010-01-01

    This report describes operations at Connecticut Transit (CTTRANSIT) in Hartford for one prototype fuel cell bus and three new diesel buses operating from the same location. The prototype fuel cell bus was manufactured by Van Hool and ISE Corp. and features an electric hybrid drive system with a UTC Power PureMotion 120 Fuel Cell Power System and ZEBRA batteries for energy storage. The fuel cell bus started operation in April 2007, and evaluation results through October 2009 are provided in this report.

  4. Design of the HEAO main bus shunt regulator. [High Energy Astronomical Observatory solar array

    Science.gov (United States)

    Middlebrook, R. D.; Kimble, S. G.

    1976-01-01

    The High Energy Astronomy Observatory (HEAO) is being built for NASA by an American company. The general requirements concerning the HEAO main bus regulator are examined. The bus regulated voltage is 33 V, the maximum shunt current is 45 A, and the regulator output impedance is to be less than 0.5 Ohm from dc to 100 kHz. Loop gain design considerations for the main bus regulator are discussed and a description is given of the general device configuration. Attention is also given to regulator loop design and performance.

  5. A Communication-Less Distributed Voltage Control Strategy for a Multi-Bus AC Islanded Microgrid

    DEFF Research Database (Denmark)

    Wang, Yanbo; Tan, Yongdong; Chen, Zhe;

    2014-01-01

    This paper presents a communication-less distributed voltage control strategy for a multi-bus AC islanded microgrid. First, a Kalman Filter-based network voltage estimator is proposed to obtain voltage responses without communication links in the presence of load disturbances. Then, a voltage...... (Distributed Generator) unit rather than relying on any communication facilities; (2) In contrast to the conventional PI-based voltage control method, the proposed voltage control strategy can implement not only offset-free control for single-bus, but also optimal control for multi-bus. Thus the flexibility...

  6. A Rule-Based Energy Management Strategy for a Plug-in Hybrid School Bus Based on a Controller Area Network Bus

    Directory of Open Access Journals (Sweden)

    Jiankun Peng

    2015-06-01

    Full Text Available This paper presents a rule-based energy management strategy for a plug-in hybrid school bus (PHSB. In order to verify the effectiveness and rationality of the proposed energy management strategy, the powertrain and control models were built with MATLAB/Simulink. The PHSB powertrain model includes an engine model, ISG (integrated started and generator model, drive motor model, power battery packs model, driver model, and vehicle longitudinal dynamics model. To evaluate the controller area network (CAN bus performance features such as the bus load, signal hysteresis, and to verify the reliability and real-time performance of the CAN bus multi-node control method, a co-simulation platform was built with CANoe and MATLAB/Simulink. The co-simulation results show that the control strategy can meet the requirements of the PHSB’s dynamic performance. Meanwhile, the charge-depleting mode (CD and charge-sustaining mode (CS can switch between each other and maintain a state-of-charge (SoC of around 30%, indicating that the energy management strategy effectively extends the working period of the CD mode and improves the fuel economy further. The energy consumption per 100 km includes 13.7 L diesel and 10.5 kW·h electricity with an initial SoC of 75%. The CANoe simulation results show that the bus communication performs well without error frames.

  7. Tsunami Inundation modeling for Tolaga Bay, Tokomaru Bay, Hicks Bay and Te Araroa communities

    Science.gov (United States)

    Barberopoulou, A.; Wang, X.; Power, W. L.

    2012-12-01

    We assess the tsunami hazard to four communities in Raukumara Peninsula (Northeastern region of North Island of New Zealand): Tokomaru Bay, Tolaga Bay, Hicks Bay and Te Araroa. Representative severe but realistic scenarios that could affect the Raukumara peninsula are earthquakes that rupture the interface between the Australian and Pacific plates, earthquakes that rupture faults within the overlying Australian plate or the subducting Pacific plate (location is not always well constrained). Earthquakes that rupture both the plate interface and simultaneously faults within the crust of the Australian plate are also a possibility. Tsunamis may also be caused by submarine landslides that occur near the edge of the continental shelf, but these are not considered here. For this study four scenario events were constructed, including a distant event from South America (offshore Peru), outer rise events and a thrust event in the Hikurangi region off the east coast of New Zealand. The sources are not exhaustive but representative of the types of significant events that could occur in the region and were either improved from earlier sources or derived from recent studies. Available high resolution LiDAR and RTK data were combined with topographic and LINZ data for the development of bathymetric/topographic grids. Our modelling results show that Tolaga Bay appears most vulnerable to tsunami inundation although Hicks Bay and Te Araroa are also significantly inundated in several of the scenarios. Tokomaru Bay is naturally well protected because the rapid change in elevation limits the range of inundation. The worst scenario for Tokomaru Bay was an earthquake in the Hikurangi subduction zone resulting in large flow depths, whereas for Tolaga Bay inundation is severe from most scenarios. Hicks Bay and Te Araroa get the most severe flooding from earthquakes in South America and on the Hikurangi subduction zone. Inundation extent is similar for Tolaga Bay during the Outer Rise and

  8. Bus Stops, Published in 2008, 1:1200 (1in=100ft) scale, Brown County, WI.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Bus Stops dataset, published at 1:1200 (1in=100ft) scale, was produced all or in part from Field Survey/GPS information as of 2008. Data by this publisher are...

  9. Research on urban public traffic network with multi-weights based on single bus transfer junction

    Science.gov (United States)

    An, Xin-lei; Zhang, Li; Zhang, Jian-gang

    2015-10-01

    Regarding single bus transfer junction as a research object, this paper constructs the urban traffic network models with multi-weights taking different bus lines in bus transfer junction as the network nodes, that is, the urban traffic network with multi-weights is given different properties weights at every edge. According to the method of network split, the complex network with multi-weights is split into several different single weighted complex networks. Then, we study the global synchronization of the new network model by changing congestion degrees, transfers coefficient and passenger flow density between different bus lines. Finally, analytical and simulated results are given to show the impact of different properties weights to the public traffic network balance.

  10. Survival analysis of car travel time near a bus stop in developing countries

    Institute of Scientific and Technical Information of China (English)

    YANG XiaoBao; GAO ZiYou; GUO HongWei; HUAN Mei

    2012-01-01

    This paper presents an important investigation into car travel time affected by mixed traffic flow near a bus stop on the basis of survival analysis theory.Travel time data associated with mixed traffic characteristics near a bus stop were collected by video cameras.A hazard-based duration model was introduced to analyze the effects of mixed traffic flow on car travel time.The results indicate that mixed traffic flow impacts car travel time significantly.And the presence of bus berthing violation would delay car travel time.The proposed model can be used to forecast temporal shifts in car travel time due to changes in mixed traffic flow.The influential factors related to mixed traffic flow should be given full consideration in the planning and designing of bus stops in developing countries.

  11. Analysis of Journey to Work Travel Behavior by Car and Bus in the Sydney Metropolitan Region

    Directory of Open Access Journals (Sweden)

    Suthanaya P.A.

    2011-01-01

    Full Text Available Car dependence is a fundamental problem in the sustainability of cities with low-density suburban sprawl. Increasing the use of public transport is one of the policy objectives commonly adopted to overcome this problem. It is essential to study journey to work travel behavior by car and bus. This paper applied preference function to analyze travel behavior and Moran’s I spatial statistic to evaluate the spatial association. The results indicated that the commuting preferences of residents have moved towards distance maximization. In general, bus was preferred for shorter distance trips whilst car was preferred for longer distance trips. Unlike car, by increasing distances from the Central Business District, residents tended to use bus for shorter distance trip. A significant positive spatial association was identified for both the slope preferences by car and bus where zones with a preference towards longer or shorter trips tended to travel to zones with similar preferences.

  12. USGS Small-scale Dataset - Railroad and Bus Passenger Stations of the United States 201207 Shapefile

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This map layer shows Amtrak intercity railroad and bus passenger terminals in the United States. There are no Amtrak stations in Alaska or Hawaii. The data are a...

  13. A Comparative Analysis of Different Arbitration Protocols for Multiple—Bus Multiprocessors

    Institute of Scientific and Technical Information of China (English)

    庄旗铭; 杨庆; 等

    1996-01-01

    Earlier performance studies of multiple-bus multiprocessor systems assume a random selection of competing requests for bus assignment and ignore the effects of realistic bus arbitraion schemes on the performance of such systems.In this paper,we present performance analysis of the multiple-bus systems with different arbitration protocols.The priority protocols considered are random selection,fixed priority,rotating priority,round-robin and FIFO.Analytical models are developed for each of these five different priority protocols.Each of our analyses models exactly the behavior of the corresponding priority protocol with little computation cost.The analytical models are validated through extensive simulations and are them used to carry out performance analysis and comparison of different priority protocols.Numerical results obtained from our models show that the round-robin protocol performs the best amont the five protocols in the system with a few buses.

  14. Bus Routes, Published in 2006, 1:100000 (1in=8333ft) scale, Atlanta Regional Commission.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Bus Routes dataset, published at 1:100000 (1in=8333ft) scale, was produced all or in part from Other information as of 2006. Data by this publisher are often...

  15. Annoyance evaluation and the effect of noise on the health of bus drivers

    Directory of Open Access Journals (Sweden)

    Portela S Bruno

    2013-01-01

    Full Text Available In the present study, we evaluated annoyance and the effects of noise on the health of bus drivers. For that, 200 bus drivers from a public transport company participated in a cross-sectional study. Annoyance and effects on health was measured with analog scale: Sleep quality, occurrence of tinnitus, headache, irritation, and annoyance from bus engine, traffic, and passengers. Data of age and working time of bus drivers also were obtained. For noise exposure, LA eq was evaluated in 80 buses. Statistical analysis consisted of mean, standard deviation, minimum, and maximum, Kruskal-Wallis test with post-hoc Dunn, one-way ANOVA with post-hoc Tukey and Spearman′s correlation coefficient. Results indicate three groups of bus drivers (not annoyed: (N.A., a little annoyed (L.A. and highly annoyed (H.A.. The group H.A. was younger and with less working time in relation to others, with a significant difference only for age. Regarding sleep quality, there was no significant difference. For results on the occurrence of tinnitus, headache and irritation after work, group H.A. had significantly higher means. Result of annoyance to the bus engine was significantly higher in H.A. than in L.A. and N.A. Annoyance to traffic and passengers, no significant differences were found, but the highest results were found for L.A., followed by H.A. and N.A. Equivalent sound pressure level in buses was above of the limit for occupational comfort. It was concluded that bus drivers has considerable level of noise annoyance and some health effects are perceived. The noise is a factor discomfort ergonomic that may cause effects on health of bus drivers. This study aims to evaluate annoyance and the effects of noise on the health of bus drivers. Cross-sectional study with buses and bus drivers. For that, 200 bus drivers from a public transport company participated in a cross-sectional study. Annoyance and effects on health was measured with analog scale: Sleep quality

  16. Railroad and Bus Passenger Stations of the United States - Direct Download

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This map layer shows Amtrak intercity railroad and bus passenger terminals in the United States. There are no Amtrak stations in Alaska or Hawaii. The data are a...

  17. Microprocessor based dual bus structured data acquisition and processing system : DAPS-80

    International Nuclear Information System (INIS)

    The microprocessor based dual bus structured data acquisition and processing system has been designed around Intel 8080 microprocessor. The system is described and operational results are given. (M.G.B.)

  18. Exploring public bus service quality in South Africa: A structural equation modelling approach

    Directory of Open Access Journals (Sweden)

    Ayanda M. Vilakazi

    2014-03-01

    Full Text Available This study, which is a deviation from the usual practice of using SERVQUAL or an adaptedversion thereof, uses McKnight, Pagano and Paaswell’s (1986 service quality dimensions,namely reliability; extent of service; comfort; safety; and affordability (RECSA and structuralequation modelling to determine commuters’ perception of public bus service quality in amajor city in South Africa. The RECSA model was adapted and fitted to the data collectedfrom a convenience sample of bus commuters in Johannesburg, using structural equationmodelling. It was ascertained that reliability, service, comfort and safety influenced thepublic bus commuters’ perception of the overall service quality. The implications of theaforementioned findings for providers of public bus services are explained.

  19. 77 FR 18739 - Safety Zone; Bay Swim V, Presque Isle Bay, Erie, PA

    Science.gov (United States)

    2012-03-28

    ... the January 17, 2008, issue of the Federal Register (73 FR 3316). Public Meeting We do not now plan to... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone; Bay Swim V, Presque Isle Bay, Erie, PA... is intended to restrict vessels from a portion of the Presque Island Bay during the Bay Swim...

  20. 77 FR 35860 - Safety Zone; Bay Swim V, Presque Isle Bay, Erie, PA

    Science.gov (United States)

    2012-06-15

    ..., Erie, PA in the Federal Register (77 FR 18739). We received no letters commenting on the proposed rule... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone; Bay Swim V, Presque Isle Bay, Erie, PA... restrict vessels from a portion of the Presque Island Bay during the Bay Swim V swimming event. The...

  1. 78 FR 34575 - Safety Zone; Bay Swim VI, Presque Isle Bay, Erie, PA

    Science.gov (United States)

    2013-06-10

    ... FR Federal Register NPRM Notice of Proposed Rulemaking TFR Temporary Final Rule A. Regulatory History... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone; Bay Swim VI, Presque Isle Bay, Erie, PA... portion of Presque Isle bay during the Bay Swim VI swimming event. This temporary safety zone is...

  2. Humboldt Bay, California Benthic Habitats 2009 Geoform

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Humboldt Bay is the largest estuary in California north of San Francisco Bay and represents a significant resource for the north coast region. Beginning in 2007 the...

  3. Humboldt Bay, California Benthic Habitats 2009 Biotic

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Humboldt Bay is the largest estuary in California north of San Francisco Bay and represents a significant resource for the north coast region. Beginning in 2007 the...

  4. Humboldt Bay, California Benthic Habitats 2009 Substrate

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Humboldt Bay is the largest estuary in California north of San Francisco Bay and represents a significant resource for the north coast region. Beginning in 2007 the...

  5. Humboldt Bay, California Benthic Habitats 2009 Geodatabase

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Humboldt Bay is the largest estuary in California north of San Francisco Bay and represents a significant resource for the north coast region. Beginning in 2007 the...

  6. A perception system for accurate automatic control of an articulated bus

    OpenAIRE

    Salinas, Carlota; Montes, Héctor; Armada, Manuel

    2010-01-01

    This paper describes the perception system for an automatic articulated bus where an accurate tracking trajectory is desired. Among the most promising transport infrastructures of the autonomous or semi-autonomous transportation systems, the articulated bus is an interesting low cost and friendly option. This platform involves a mobile vehicle and a private circuit inside CSIC premises. The perception system, presented in this work, based on 2D laser scanner as a prime sensor generates local ...

  7. Using FTT-CAN to the Flexible Control of Bus Redundancy and Bandwidth Usage

    OpenAIRE

    Silva, Valter; Fonseca, José; Ferreira, Joaquim

    2006-01-01

    Controller Area Network (CAN) is a popular and very well-known bus system, both in academia and in industry, initially targeted to automotive applications as a single digital bus to replace the wiring that were growing complexity, weight and cost with the advent of new automotive appliances. However, requirements have evolved and CAN’s dependability and bandwidth limitations led to the emergence of alternative networks such as FlexRay and TTP/C. Nevertheless, we believe that it...

  8. The Ruggedized STD Bus Microcomputer - A low cost computer suitable for Space Shuttle experiments

    Science.gov (United States)

    Budney, T. J.; Stone, R. W.

    1982-01-01

    Previous space flight computers have been costly in terms of both hardware and software. The Ruggedized STD Bus Microcomputer is based on the commercial Mostek/Pro-Log STD Bus. Ruggedized PC cards can be based on commercial cards from more than 60 manufacturers, reducing hardware cost and design time. Software costs are minimized by using standard 8-bit microprocessors and by debugging code using commercial versions of the ruggedized flight boards while the flight hardware is being fabricated.

  9. Loss of power of a 220 VAC safety bus bar at Embalse NPP

    International Nuclear Information System (INIS)

    Embalse nuclear power plant is located at the Cordoba Province, 5 kilometres Southern the town of Embalse. It is equipped with one 600 MWe CANDU reactor. At the time of the event, which occurred on 11 October 2004, the plant was operating normally at full power. The Embalse nuclear power plant electrical power system buses are classified, in reliability decreasing order, into the following four different levels: 1) Class I: uninterrupted direct current supplies for safety related and other essential loads; 2) Class II: uninterrupted alternating current supplies for safety related and other essential loads; 3) Class III: alternating current supplies to essential auxiliaries which can tolerate the short interruption required until to start up and load the on-site standby generators and 4) Class IV: normal alternating current supplies to auxiliaries which can tolerate long duration interruptions without affecting personnel or equipment safety (Class IV is the normal source of power to Class III system). In particular, the Class II 220 VAC uninterrupted monophasic safety bus bars are composed by three 220 VAC subsystems powered by the following two sources of power: Class I uninterrupted safety bus bars (5551 BUA, BUB and BUC bars) and Class III secondary distribution 5433-MCC5 and MCC6. The Class II 220 VAC bus bars are normally powered from Class I bus bars through static monophasic inverters. Beside, in a static monophasic out of service case, Class II bus bar affected could be powered from Class III bus bars via a transformer stabilizer. Class II bus bars supplies power to both control computers and the AC instrumentation and control devices. When 220 VAC (Class II) 5542-BUC-monophasic-inverter failure was coincident with a subsequent independent failure to transfer to the Class III through static commuter 5542-SVR-C, a loss of the 220 VAC uninterrupted monophasic safety bus bar (Class II) event was caused. (author)

  10. Congestion Management by TCPST In IEEE 9 Bus System Using Matlab Simulink.

    OpenAIRE

    Amit Sharma; Ram Avtar Jaswal

    2013-01-01

    Increased electric power consumption causes transmission lines to be driven close to or even beyond their transfer capacities resulting in overloaded lines and congestions. Flexible AC Transmission Systems (FACTS) provide an opportunity to resolve congestions by controlling power flows and voltages. Main focus in this paper lies on the Thyristor Controlled Phase Shift Transformer (TCPST). IEEE 9 bus system is considered for congestion management. Parameters for bus system are predefined by IE...

  11. Central Thermal Bus for Micro and Small Satellites: Scalability and Adaptability

    OpenAIRE

    Wooldridge, John; Wrenn, Kim; Wolf, Dave; Bugby, Dave; Krein, Steve; Mark, Dan

    2005-01-01

    Swales Aerospace is engaged in the development of a Centralized Thermal Bus (CTB), which stands to significantly increase the capability, flexibility, and scalability of a small or micro-sat bus. The CTB is a multievaporator hybrid loop heat pipe (MEHLHP). It combines the best qualities of both capillary pumped loops and loop heat pipes while improving operational robustness, simplifying mission modes and system deployment/startup. Key benefits of the CTB are: multiple load heat transport, he...

  12. PERFORMANCE ASSESSMENT OF PRODUCT DEVELOPMENT PROCESS IN A BUS COMPANY: A CASE STUDY

    OpenAIRE

    Tiago Ribeiro de Araújo; Fernanda Cristina Pierre

    2014-01-01

    This article aims to examine the application of a method for assessing the performance of the product development process (PDP) through the assessment of managerial skills in a bus body industry. A case study was carried out and a PDP method was applied through a questionnaire addressing the PDP management skills according to Dechamps and Nayak (1997) model and validated by Silva (2001) in a bus body company which showed all the features available in the literature on industria...

  13. The impact of bus drivers ’ lifestyle on the occurrence of health problems and absenteeism

    Directory of Open Access Journals (Sweden)

    Andrej Jerman

    2016-06-01

    Full Text Available Research Question: Do bus drivers’ lifestyles affect the occurrence of health problems and absenteeism? Purpose: The purpose of the study was to determine whether the lifestyle of professional bus drivers affects the occurrence of health problems and the phenomenon of absenteeism. Method: A quantitative research method was used in the research. Data were collected using a structured questionnaire, on a sample of 230 professional bus drivers from different bus transport companies in Slovenia. Selected data were analyzed with chi-square test and multiple regression analysis. Results: We determined that there is a relationship between the state of health of professional bus drivers and participation in sport activity and that there is a statistically significant impact of lifestyle on the absenteeism of professional bus drivers. Organization: The study points to the necessity of management’s awareness to improve the conditions for the health status of employees and, consequently, absenteeism. Managers need to be more vigilant in ensuring conditions and social security that will allow employees a higher quality lifestyle. Society: The poor quality lifestyle of professional bus drivers, which includes different addictions, inadequate physical activity, and poor working conditions, is a significant factor causing absenteeism. All these factors influence the onset of negative consequences, such as the direct cost of compensation payments, costs of replacing the absent person, a reduction in productivity, which in turn affect economic growth and the high cost of health care. Originality: This is the first focus group study of professional bus drivers that targets lifestyle and its connection to absenteeism. Limitations/Future Research: The main limitation of the study is the number of respondents. The reason for this is that professional drivers are less responsive in the survey and that the study was conducted only in Slovenia, country of two

  14. Calculation of Flexible Bus-Bars Electrodynamic Stability with Application of Implicit Scheme

    OpenAIRE

    Y. G. Panamarenka

    2008-01-01

    A numerical method for calculation of open-air substations’ flexible bus-bars dynamic at short-circuit has been improved on equations of a flexible elastic string with application of an implicit scheme. On the basis of the numerical method a computer program FLEBUS for calculation of substations’ flexible bus-bars dynamic at short-circuit has been developed. An approbation and an estimation of calculation result reliability have been carried out in accordance with the program while using expe...

  15. The Metabolic Syndrome and its Association with Over Time Driving in Iranian Professional Bus Drivers

    OpenAIRE

    Afshin Blouri; Ali Saba; Amin Shirazi; Farnaz Nabizadeh; Maghsoud Matinkhah; Iraj Mohebbi

    2010-01-01

    The aim of the study was to determine the prevalence of metabolic syndrome (MeS) in professional bus drivers, and its association with overtime working hours among those drivers in Urmia, Iran. In this cross sectional study the studies population was 626 professional bus drivers, aged 20-69 yr. The MeS (according to the National Cholesterol Education Program Adult Treatment Panel III), Waist circumference, Systolic blood pressure, Diastolic blood pressure, Fasting plasma glucose, Triglyceride...

  16. Mechanical analysis of the main bus bars in the DFBA shuffling modules

    CERN Document Server

    Ramos, D

    2012-01-01

    The main bus bars (13 kA) inside the shuffling modules of the distribution feed boxes powering the LHC arcs (DFBA) are subjected to high Lorentz forces. The structural behaviour of the bus bars under such forces is here analysed. The results are discussed with respect to a risk of structural failure due to excessive deformation or degradation of the electrical insulation by repeated contact with other surfaces.

  17. External validation of psychological job demands in a bus driver sample

    OpenAIRE

    Gimeno, D; Benavides, F G; Mira, M.; Martinez, J. M.; Benach, J

    2004-01-01

    Psychosocial risk factors have been considered as characteristics of the work environment rather than an individual issue, but their presence in the workplace is usually measured by self-reported questionnaires, based on worker attitudes. The objective of the study was to compare a self-reported measure of psychological job demands in a bus driver sample with selected indicators of bus company activity, as external 'objective' indicators, in order to assess its external validity. The final sa...

  18. 基于CAN总线的电动客车空调控制方案%Air-conditioner Control Project for Electric Bus Based on CAN Bus

    Institute of Scientific and Technical Information of China (English)

    杨桥生

    2012-01-01

    The author simply introduces two kinds of present control modes for air-conditioner of electric bus in domestic market,puts forward a new kind of its control mode based on CAN bus,and design the CAN's messages reports.%简述国内电动客车空调的两种控制模式;提出一种基于CAN总线的电动客车空调控制模式,并设计CAN通讯报文。

  19. ETHERBONE - a network layer for the wishbone SoC bus

    International Nuclear Information System (INIS)

    Today, there are several System on a Chip (SoC) bus systems. Typically, these buses are confined on-chip and rely on higher level components to communicate with the outside world. Taking these systems a step further, we see the possibility of extending the reach of the SoC bus to remote FPGAs or processors. This leads to the idea of the EtherBone (EB) core, which connects a Wishbone (WB) Ver. 4 Bus via a Gigabit Ethernet based network link to remote peripheral devices. EB acts as a transparent interconnect module towards attached WB Bus devices. Address information and data from one or more WB bus cycles is preceded with a descriptive header and encapsulated in a UDP/IP packet. Because of this standard compliance, EB is able to traverse Wide Area Networks and is therefore not bound to a geographic location. Due to the low level nature of the WB bus, EB provides a sound basis for remote hardware tools like a JTAG debugger, In-System-Programmer (ISP), boundary scan interface or logic analyser module. EB was developed in the scope of the White-Rabbit Timing Project (WR) at CERN and GSI/FAIR, which employs GigaBit Ethernet technology to communicate with memory mapped slave devices. WR will make use of EB as means to issue commands to its timing nodes and control connected accelerator hardware. (authors)

  20. An analytical algorithm to determine allowable ampacities of horizontally installed rectangular bus bars

    Directory of Open Access Journals (Sweden)

    Klimenta Dardan O.

    2016-01-01

    Full Text Available The main objective of this paper is to propose an algorithm for the determination of the allowable ampacities of single rectangular-section bus bars without the occurrence of correction factors. Without correction factors, the ampacity computation of the copper and aluminium bus bars is fully automatized. The analytical algorithm has been implemented in a computer program code that along with the allowable ampacity can compute the bus bar temperature and the individual heat transfer coefficient for each side of the bus bar, as well as their corresponding power losses. Natural and forced convection correlations for rectangular bus bars are applied. Effects of the solar radiation and radiation heat losses from the bus bar surface are taken into consideration as well. The finite element method (FEM has been used for the linear/non-linear steady-state thermal analysis, i.e. for validation of the analytical algorithm. All FEM-based numerical computations were carried out using the COMSOL Heat Transfer Module. [Projekat Ministarstva nauke Republike Srbije, br. TR33046

  1. Exact and Metaheuristic Approaches for a Bi-Objective School Bus Scheduling Problem.

    Science.gov (United States)

    Chen, Xiaopan; Kong, Yunfeng; Dang, Lanxue; Hou, Yane; Ye, Xinyue

    2015-01-01

    As a class of hard combinatorial optimization problems, the school bus routing problem has received considerable attention in the last decades. For a multi-school system, given the bus trips for each school, the school bus scheduling problem aims at optimizing bus schedules to serve all the trips within the school time windows. In this paper, we propose two approaches for solving the bi-objective school bus scheduling problem: an exact method of mixed integer programming (MIP) and a metaheuristic method which combines simulated annealing with local search. We develop MIP formulations for homogenous and heterogeneous fleet problems respectively and solve the models by MIP solver CPLEX. The bus type-based formulation for heterogeneous fleet problem reduces the model complexity in terms of the number of decision variables and constraints. The metaheuristic method is a two-stage framework for minimizing the number of buses to be used as well as the total travel distance of buses. We evaluate the proposed MIP and the metaheuristic method on two benchmark datasets, showing that on both instances, our metaheuristic method significantly outperforms the respective state-of-the-art methods. PMID:26176764

  2. Exact and Metaheuristic Approaches for a Bi-Objective School Bus Scheduling Problem.

    Directory of Open Access Journals (Sweden)

    Xiaopan Chen

    Full Text Available As a class of hard combinatorial optimization problems, the school bus routing problem has received considerable attention in the last decades. For a multi-school system, given the bus trips for each school, the school bus scheduling problem aims at optimizing bus schedules to serve all the trips within the school time windows. In this paper, we propose two approaches for solving the bi-objective school bus scheduling problem: an exact method of mixed integer programming (MIP and a metaheuristic method which combines simulated annealing with local search. We develop MIP formulations for homogenous and heterogeneous fleet problems respectively and solve the models by MIP solver CPLEX. The bus type-based formulation for heterogeneous fleet problem reduces the model complexity in terms of the number of decision variables and constraints. The metaheuristic method is a two-stage framework for minimizing the number of buses to be used as well as the total travel distance of buses. We evaluate the proposed MIP and the metaheuristic method on two benchmark datasets, showing that on both instances, our metaheuristic method significantly outperforms the respective state-of-the-art methods.

  3. Factors associated with self-reported driver sleepiness and incidents in city bus drivers.

    Science.gov (United States)

    Anund, Anna; Ihlström, Jonas; Fors, Carina; Kecklund, Göran; Filtness, Ashleigh

    2016-08-01

    Driver fatigue has received increased attention during recent years and is now considered to be a major contributor to approximately 15-30% of all crashes. However, little is known about fatigue in city bus drivers. It is hypothesized that city bus drivers suffer from sleepiness, which is due to a combination of working conditions, lack of health and reduced sleep quantity and quality. The overall aim with the current study is to investigate if severe driver sleepiness, as indicated by subjective reports of having to fight sleep while driving, is a problem for city based bus drivers in Sweden and if so, to identify the determinants related to working conditions, health and sleep which contribute towards this. The results indicate that driver sleepiness is a problem for city bus drivers, with 19% having to fight to stay awake while driving the bus 2-3 times each week or more and nearly half experiencing this at least 2-4 times per month. In conclusion, severe sleepiness, as indicated by having to fight sleep during driving, was common among the city bus drivers. Severe sleepiness correlated with fatigue related safety risks, such as near crashes. PMID:27098307

  4. EtherBone - A Network Layer for the Wishbone SoC Bus

    CERN Document Server

    Kreider, M; Lewis, J; Włostowski, T; Serrano, J

    2011-01-01

    Today, there are several System on a Chip (SoC) bus systems. Typically, these buses are confined on-chip and rely on higher level components to communicate with the outside world. Taking these systems a step further, we see the possibility of extending the reach of the SoC bus to remote FPGAs or processors. This leads to the idea of the EtherBone (EB) core, which connects a Wishbone (WB) Ver. 4 Bus via a Gigabit Ethernet based network link to remote peripheral devices. EB acts as a transparent interconnect module towards attached WB Bus devices. Address information and data from one or more WB bus cycles is preceded with a descriptive header and encapsulated in a UDP/IP packet. Because of this standard compliance, EB is able to traverse Wide Area Networks and is therefore not bound to a geographic location. Due to the low level nature of the WB bus, EB provides a sound basis for remote hardware tools like a JTAG debugger, In-System-Programmer (ISP), boundary scan interface or logic analyser module. EB was de...

  5. Multi Resolution AHB Bus Tracer with Real Time Compression for SOC

    Directory of Open Access Journals (Sweden)

    J. Jagadish Reddy

    2013-01-01

    Full Text Available AMBA (Advanced Microcontroller based Bus Architecture consists of AHB, APB, ASB and AXI. In this project we are Tracing AHB (Advanced High performance Bus signals with Real time Compression and Multi-resolution Techniques. A simple transaction on the AHB consists of an address phase and a subsequent data phase. Access to the target device is controlled through a MUX , thereby admitting bus-access to one bus-master at a time. In AHB Tracer we have to Trace Address signals, Data signals and Control signals, we have to compress them depending on AHB protocols. A multi-resolution AHB on-chip bus tracer is named as SYS_HMRBT (AHB Multi-resolution Bus Tracer and is used for monitoring. The goal is to provide better compression quality and multiple resolution traces to meet the complex SoC debugging needs. Compressing all signals at cycle-accurate-level does not always meet the debugging needs. As SOCs become more complex, the transaction level debugging becomes increasingly important, since it helps designers focus on the functional behaviors, instead of interpreting complex signals. By using this SYS_HMRBT, we can achieve 79%-96% of compression depending on selected resolution mode. Tools Used for this Project are Modelsim for Simulation, and Xilinx ISE II for Synthesis

  6. Bayes linear statistics, theory & methods

    CERN Document Server

    Goldstein, Michael

    2007-01-01

    Bayesian methods combine information available from data with any prior information available from expert knowledge. The Bayes linear approach follows this path, offering a quantitative structure for expressing beliefs, and systematic methods for adjusting these beliefs, given observational data. The methodology differs from the full Bayesian methodology in that it establishes simpler approaches to belief specification and analysis based around expectation judgements. Bayes Linear Statistics presents an authoritative account of this approach, explaining the foundations, theory, methodology, and practicalities of this important field. The text provides a thorough coverage of Bayes linear analysis, from the development of the basic language to the collection of algebraic results needed for efficient implementation, with detailed practical examples. The book covers:The importance of partial prior specifications for complex problems where it is difficult to supply a meaningful full prior probability specification...

  7. Distribution and behavior of major and trace elements in Tokyo Bay, Mutsu Bay and Funka Bay marine sediments

    Energy Technology Data Exchange (ETDEWEB)

    Honda, Teruyuki [Musashi Inst. of Technology, Atomic Energy Research Laboratory, Kawasaki, Kanagawa (Japan); Kimura, Ken-ichiro [Musashi Inst. of Technology, Graduate School, Research Division in Engineering, Kawasaki, Kanagawa (Japan)

    2003-06-01

    Fourteen major and trace elements in marine sediment core samples collected from the coasts along eastern Japan, i.e. Tokyo Bay (II) (the recess), Tokyo Bay (IV) (the mouth), Mutsu Bay and Funka Bay and the Northwest Pacific basin as a comparative subject were determined by the instrumental neutron activation analysis (INAA). The sedimentation rates and sedimentary ages were calculated for the coastal sediment cores by the {sup 210}Pb method. The results obtained in this study are summarized as follows: (1) Lanthanoid abundance patterns suggested that the major origin of the sediments was terrigenous material. La*/Lu* and Ce*/La* ratios revealed that the sediments from Tokyo Bay (II) and Mutsu Bay more directly reflected the contribution from river than those of other regions. In addition, the Th/Sc ratio indicated that the coastal sediments mainly originated in the materials from the volcanic island-arcs, Japanese islands, whereas those from the Northwest Pacific mainly from the continent. (2) The correlation between the Ce/U and Th/U ratios with high correlation coefficients of 0.920 to 0.991 indicated that all the sediments from Tokyo Bay (II) and Funka Bay were in reducing conditions while at least the upper sediments from Tokyo Bay (IV) and Mutsu Bay were in oxidizing conditions. (3) It became quite obvious that the sedimentation mechanism and the sedimentation environment at Tokyo Bay (II) was different from those at Tokyo Bay (IV), since the sedimentation rate at Tokyo Bay (II) was approximately twice as large as that at Tokyo Bay (IV). The sedimentary age of the 5th layer (8{approx}10 cm in depth) from Funka Bay was calculated at approximately 1940{approx}50, which agreed with the time, 1943{approx}45 when Showa-shinzan was formed by the eruption of the Usu volcano. (author)

  8. 33 CFR 117.622 - West Bay

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false West Bay 117.622 Section 117.622 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Massachusetts § 117.622 West Bay The draw of the West Bay Bridge, mile...

  9. Bus Travel Willingness under the Condition of Bus Information%公交信息条件下的公交出行意愿研究

    Institute of Scientific and Technical Information of China (English)

    左毅刚; 李文权; 陈茜; 李洁; 郭士永

    2014-01-01

    In-depth analysis of influencing mechanism of bus information on the residents travel mode choice is the theoretical basis of rational planning of urban bus travel information environment ,which has important significance for ur-ban traffic management and congestion mitigation .Based on the theory of planned behavior ,at the basis of three basic variables of behavior attitude ,subjective norm ,perceived behavioral control in the theory of planned behavior ,variables of transit information ,personal attributes and travel experience are added to improve the theory of planned behavior .An improved theory of planned behavior is used to build a bus travel willingness model under the condition of bus Informa-tion .With the Nanjing residents as research object ,a structural equation model is used to verify the survey data in order to determine the interaction between various factors and their impact on the willingness of bus travel .The results show that the bus information has significant and positive impact on bus travel variables of attitude ,subjective norm and per-ceived behavioral control with the influencing coefficients of 0 .533 ,0 .451 and 0 .576 respectively ,and that the bus infor-mation has indirect influence on bus travel willingness and the total effect is 0 .92 ,which shows that high quality of the in-formation can improve the appeal of bus and enhance bus travel willingness of residents .%深入解析公交信息对居民公交出行意愿的影响机理,是合理规划城市公交出行信息环境的理论基础,对于城市交通管理以及交通拥堵的缓解有着重要的意义。基于计划行为理论在行为态度、主观规范、知觉行为控制3个基本变量的基础上加入公交信息、出行经验、个人属性等变量,对计划行为理论加以改进,利用改进的计划行为理论建立公交信息条件下的公交出行意愿模型。以南京市居民为调查研究对象,运用结构方程模型对调查数

  10. Effects of biodiesel on emissions of a bus diesel engine.

    Science.gov (United States)

    Kegl, Breda

    2008-03-01

    This paper discusses the influence of biodiesel on the injection, spray, and engine characteristics with the aim to reduce harmful emissions. The considered engine is a bus diesel engine with injection M system. The injection, fuel spray, and engine characteristics, obtained with biodiesel, are compared to those obtained with mineral diesel (D2) under various operating regimes. The considered fuel is neat biodiesel from rapeseed oil. Its density, viscosity, surface tension, and sound velocity are determined experimentally and compared to those of D2. The obtained results are used to analyze the most important injection, fuel spray, and engine characteristics. The injection characteristics are determined numerically under the operating regimes, corresponding to the 13 mode ESC test. The fuel spray is obtained experimentally under peak torque condition. Engine characteristics are determined experimentally under 13 mode ESC test conditions. The results indicate that, by using biodiesel, harmful emissions (NO(x), CO, smoke and HC) can be reduced to some extent by adjusting the injection pump timing properly. PMID:17350250

  11. Evolution of weighted complex bus transit networks with flow

    Science.gov (United States)

    Huang, Ailing; Xiong, Jie; Shen, Jinsheng; Guan, Wei

    2016-02-01

    Study on the intrinsic properties and evolutional mechanism of urban public transit networks (PTNs) has great significance for transit planning and control, particularly considering passengers’ dynamic behaviors. This paper presents an empirical analysis for exploring the complex properties of Beijing’s weighted bus transit network (BTN) based on passenger flow in L-space, and proposes a bi-level evolution model to simulate the development of transit routes from the view of complex network. The model is an iterative process that is driven by passengers’ travel demands and dual-controlled interest mechanism, which is composed of passengers’ spatio-temporal requirements and cost constraint of transit agencies. Also, the flow’s dynamic behaviors, including the evolutions of travel demand, sectional flow attracted by a new link and flow perturbation triggered in nearby routes, are taken into consideration in the evolutional process. We present the numerical experiment to validate the model, where the main parameters are estimated by using distribution functions that are deduced from real-world data. The results obtained have proven that our model can generate a BTN with complex properties, such as the scale-free behavior or small-world phenomenon, which shows an agreement with our empirical results. Our study’s results can be exploited to optimize the real BTN’s structure and improve the network’s robustness.

  12. MEASURING CUSTOMER’S SATISFACTION ON BUS TRANSPORTATION

    Directory of Open Access Journals (Sweden)

    Rabiul Islam

    2014-01-01

    Full Text Available The purpose of the study is to examine the factors measuring customers’ satisfaction, especially the impact of service quality on customers’ satisfaction in public transportation industry in the university town of Sintok located in Kedah province of Malaysia. In order to assess the relationships between service quality and customer satisfaction survey http://www.scientificjournals.org/journals2007/articles/1003.htmdata were collected from 300 Bus commuters. All hypotheses were tested using Pearson correlations, controlling for the background variables of gender, marital status, ethnicity and education. The results indicate that hypotheses 1 through 5 were supported. Using multiple regressions as a basis for causal paths, a model was developed that examined the influence of all five dimensions of service quality on customers’ satisfaction. The model explained 26.9% of the variance which indicates that 26.9% of the changes in the dependent variable are explained by the independent variables. Altogether, independent variables explained 26.9% of the variations.

  13. Bus Based Synchronization Method for CHIPPER Based NoC

    Directory of Open Access Journals (Sweden)

    D. Muralidharan

    2016-01-01

    Full Text Available Network on Chip (NoC reduces the communication delay of System on Chip (SoC. The main limitation of NoC is power consumption and area overhead. Bufferless NoC reduces the area complexity and power consumption by eliminating buffers in the traditional routers. The bufferless NoC design should include live lock freeness since they use hot potato routing. This increases the complexity of bufferless NoC design. Among the available propositions to reduce this complexity, CHIPPER based bufferless NoC is considered as one of the best options. Live lock freeness is provided in CHIPPER through golden epoch and golden packet. All routers follow some synchronization method to identify a golden packet. Clock based method is intuitively followed for synchronization in CHIPPER based NoCs. It is shown in this work that the worst-case latency of packets is unbearably high when the above synchronization is followed. To alleviate this problem, broadcast bus NoC (BBus NoC approach is proposed in this work. The proposed method decreases the worst-case latency of packets by increasing the golden epoch rate of CHIPPER.

  14. System Interconnect Bus (SIB) compatible multi crate CAMAC Controller (CC)

    International Nuclear Information System (INIS)

    This paper describes design of SIB compatible crate controller with PC interface. SIB is a general-purpose parallel 1/O interface bus used for connecting multi crate system with single PC-interface. The crate controller comprises of a dedicated PC-AT add-on SIB interface card and two width CAMAC module designed to work at station 24 and station 25 of CAMAC crate. PC Interface card (SIBINT) is used for communication between PC/AT host computer and CAMAC Crates. The controller module incorporates a set of registers, logic to generate CAMAC data way timing. Transmission protocol used is RS485 standard. This controller is used for multiple CAMAC crates system, interfaced to PC, using a 60 core twisted pair flat ribbon cable. The crate controller is developed for use in process control, general-purpose data acquisition and control system and laboratory automation. Sustained data transfer rate achieved by controller is 115 Kword/sec each word being 32 bits in length. (author)

  15. Classification using Hierarchical Naive Bayes models

    DEFF Research Database (Denmark)

    Langseth, Helge; Dyhre Nielsen, Thomas

    2006-01-01

    Classification problems have a long history in the machine learning literature. One of the simplest, and yet most consistently well-performing set of classifiers is the Naïve Bayes models. However, an inherent problem with these classifiers is the assumption that all attributes used to describe......, termed Hierarchical Naïve Bayes models. Hierarchical Naïve Bayes models extend the modeling flexibility of Naïve Bayes models by introducing latent variables to relax some of the independence statements in these models. We propose a simple algorithm for learning Hierarchical Naïve Bayes models...

  16. Backscatter imagery in Jobos Bay

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This image represents a 1x1 meter resolution backscatter mosaic of Jobos Bay, Puerto Rico (in NAD83 UTM 19 North). The backscatter values are in relative 8-bit (0 –...

  17. Effect of Educational Program to Decrease Substance Abuse among Suburban Bus Drivers Based on Theory of Planned Behavior

    OpenAIRE

    Moeini, B.; S. Bashirian; A. Moghimbeigi; V. Kafami; A.A. Mousali

    2015-01-01

    Introduction & Objective: Driving under the influence of drugs is considered a social pathology that has adverse effects on a society. This study aimed to investigate the effect of substance abuse educational program among the bus drivers on the basis of the theory of planned be-havior. Materials & Methods: This quasi-experimental study was conducted on 80 suburban bus drivers working at Hamadan transportation terminal. The bus drivers were randomly divided in two equal groups (intervention a...

  18. Research, development and demonstration of a fuel cell/battery powered bus system. Phase 1, Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-02-28

    Purpose of the Phase I effort was to demonstrate feasibility of the fuel cell/battery system for powering a small bus (under 30 ft or 9 m) on an urban bus route. A brassboard powerplant was specified, designed, fabricated, and tested to demonstrate feasibility in the laboratory. The proof-of-concept bus, with a powerplant scaled up from the brassboard, will be demonstrated under Phase II.

  19. Smoking close to others and butt littering at bus stops: pilot observational study

    Directory of Open Access Journals (Sweden)

    Nick Wilson

    2014-02-01

    Full Text Available Background. Transportation settings such as bus stops and train station platforms are increasingly the target for new smokefree legislation. Relevant issues include secondhand smoke exposure, nuisance, litter, fire risks and the normalization of smoking. We therefore aimed to pilot study aspects of smoking behavior and butt disposal at bus stops. Methods. Systematic observation of smoking and butt disposal by smokers at bus stops. The selection of 11 sites was a mix of convenience and purposeful (bus stops on main routes in two New Zealand cities. Results. During 27 h of observation, a total of 112 lit cigarettes were observed being smoked. Smoking occurred in the presence of: just adults (46%, both young people and adults (44%, just young people (6% and alone (5%. An average of 6.3 adults and 3.8 young people were present at the bus stops while smoking occurred, at average minimum distances of 1.7 and 2.2 m respectively. In bus stops that included an enclosed shelter, 33% of the cigarettes were smoked inside the shelter with others present. Littering was the major form of cigarette disposal with 84% of cigarettes smoked being littered (95% CI; 77%–90%. Also, 4% of disposals were into vegetation, which may pose a fire risk. Conclusions. This pilot study is limited by its small size and various methodological aspects but it appears to be a first attempt to provide observational evidence around smoking at bus stops. The issues described could be considered by policy makers who are investigating national smokefree laws or by-laws covering transportation settings.

  20. A new vehicle data bus architecture and IVIS evaluation platform for ITS modulus

    Energy Technology Data Exchange (ETDEWEB)

    Spelt, P.F. [Oak Ridge National Lab., TN (United States); Kirson, A.M. [Motorola, Inc., Northbrook, IL (United States); Scott, S. [Jet Propulsion Lab., Washington, DC (United States)

    1998-12-31

    An increasing number of ITS-related after-market systems present a set of in-vehicle installation and use problems relatively unique in the history of automobile use. Many automobile manufacturers would like to offer these new state of the art devices to customers, but are hampered by the current design cycle of new cars. While auto manufacturers are indeed using multiplex buses (the automotive equivalent of a computer local area network), problems remain because manufacturers are not converging on a single bus standard. This paper presents a new dual-bus architecture to address these problems, with an In-Vehicle Information System (IVIS) research platform on which the principles embodied in the ITS Data Bus architecture can be evaluated. The dual-bus architecture has been embodied in a proposed SAE standard, with a ratification vote in December, 1996. The architecture and a reference model for the interfaces and protocols of the new bus are presented and described. The goals of the ITS Data Bus are to be inexpensive and easy to install, and to provide for safe and secure functioning. These high-level goals are embodied in the proposed standard. The IVIS Development Platform comprises a number of personal computers linked via ethernet LAN, with a high-end PC serving as the IVIS computer. In this LAN, actual devices can be inserted in place of the original PC which emulated them. This platform will serve as the development and test bed for an ITS Data Bus Conformity Test, the SAE standard for which has also been developed.

  1. Conceptual Design of the TPF-O SC Bus

    Science.gov (United States)

    Purves, Lloyd R.

    2007-01-01

    One option under current study for the Terrestrial Planet Finder-Occulter (TPF-O) observatory shares some key features of the Hubble Space Telescope (HST). Both are space telescopes with a primary mirror aperture of around 2.4 meters and designed to observe in the visible to near infrared range of wavelengths, with the major difference in science capability being that TPF-O has an areal FOV on the order of 100 times larger than that of HST. This larger FOV, whose science camera is also expected to provide fine guidance, and other mission differences, mean that most TPF-O SC bus subsystems will have very different requirements than those of HST. Unlike HST in LEO, TPF-O is designed to operate in an orbit around the Sun-Earth lagrange 2 (SEL2) point. The longer communications range to SEL2 and the large FOV require much higher performance data processing and communications than HST. Maintaining a SEL2 orbit requires TPF-O, unlike HST, to have a propulsion system. TPF-O will have a specialized tracking system that allows the formation flying occulter to maintain its required position. However, despite these additional features, the velocity required for reaching SEL2 and the limited capabilities of affordable launch vehicles require TPF-O to have a compact and low-mass design relative to HST. Finally, TPF-O may utilize a modular design to reduce development cost and, if it required, allow servicing using approaches different from those of HST.

  2. Implementation of Ada protocols on Mil-STD-1553 B data bus

    Science.gov (United States)

    Ruhman, Smil; Rosemberg, Flavia

    1986-01-01

    Standardization activity of data communication in avionic systems started in 1968 for the purpose of total system integration and the elimination of heavy wire bundles carrying signals between various subassemblies. The growing complexity of avionic systems is straining the capabilities of MIL-STD-1553 B (first issued in 1973), but a much greater challenge to it is posed by Ada, the standard language adopted for real-time, computer embedded-systems. Hardware implementation of Ada communication protocols in a contention/token bus or token ring network is proposed. However, during the transition period when the current command/response multiplex data bus is still flourishing and the development environment for distributed multi-computer Ada systems is as yet lacking, a temporary accomodation of the standard language with the standard bus could be very useful and even highly desirable. By concentrating all status informtion and decisions at the bus controller, it was found to be possible to construct an elegant and efficient harware impelementation of the Ada protocols at the bus interface. This solution is discussed.

  3. Real-time and reliability analysis of time-triggered CAN-bus

    Institute of Scientific and Technical Information of China (English)

    Xia Jiqiang; Zhang Chuansen; Bai Ronggang; Xue Liqiang

    2013-01-01

    Real-time performance and reliability are two most important issues in applications of time-triggered controller area network (CAN) bus systems at present.A scheduling matrix of time-triggered CAN-bus system is established using average-loading algorithm.Periodic messages are guaranteed to transmit without delay by distributing independent transmission windows within the system matrix.Considering the traditional CAN-bus transmission mechanism and the time-triggered feature,an algorithm is improved to calculate the worst-case delay of event-triggered messages in time-triggered CAN-bus systems.The failure probability is calculated for event-triggered messages whose worst-case delay exceeds their deadlines.Different levels of redundant structures of CAN-bus circuits are analyzed and the maintenance management is proposed to improve the system reliability.Finally,the reliabilities of different structures are calculated and the influences of maintenance on the system reliability are analyzed.

  4. Design and Implementation of High Performance AHB Arbiter for on chip Bus Architecture

    Directory of Open Access Journals (Sweden)

    ASHUTOSH KUMAR SINGH,

    2011-03-01

    Full Text Available Resolution is a big issue in SOC( system On Chip while dealing with number of master trying to sense a single data bus . The ffectiveness of a system to resolve this priority resides in its ability to logical assignment of the chance to transmit data width of the data, response to the interrupts etc. The purpose of this paper is to propose the scheme to implement such a system using the specification of AMBA bus protocol .The scheme involves the typical AMBA features of ‘single clock edge transition ‘, Split transaction ‘,’several bus masters ‘, ‘burst transfer ’.The bus arbiter ensures that only one bus master at a time is allowed to initiate data ransfers. Even though the arbitration protocol is fixed, any arbitration algorithm, such as highest priority or fair access can be implemented depending on the application requirements .The design architecture is written using VHDL(Very High Speed Integrated CircuitsHardware Description Language code using Xilinx ISE Tools .The architecture is modeled and synthesized using RTL(Register Transfer Level abstraction and Implemented on Virtex2 series.

  5. Design and Analysis of Virtual Bus Transport Using Synchronous Digital Hierarchy/Synchronous Optical Networking

    Directory of Open Access Journals (Sweden)

    R. Hassan

    2008-01-01

    Full Text Available This study presented a new data link layer design for the virtual bus architecture. The virtual bus is a hierarchical access network offered a broadcast capability for data and signaling. The proposed of the study is to support Quality of Service (QoS in network. During study, the most promising technology capable of delivering full service access at high data rates is Synchronous Digital Hierarchy (SDH/Synchronous Optical Networking (SONET. For that reason, we develop SDH/SONET as a physical layer for the virtual bus network. The main goal of this investigation was to study the performance of transmission medium and the overall performance of the network. We exemplify a Multiple Access Protocol (MAP with Generic Frame Procedure (GFP for transmitting IP network protocol datagram over SDH/SONET. This is a novel method for transmitting MAP with GFP. The protocol adds multi-terminal access capability to an inherently point-to-point link. It enabled the design of seamless networking environments using SDH/SONET as the transmission medium for Metropolitan Area Network (MAN. The new frame mapping protocol is known as Virtual Bus Transport (VBT. The performance of multiple traffic generators in a virtual bus network is of major interest for mobile network provider. We used OMNeT simulation tool to evaluate the result. Through the simulation it proved that the VBT scheduling technique offers better treatment mainly to the higher Qos requirement traffic.

  6. Geometric-Process-Based Battery Management Optimizing Policy for the Electric Bus

    Directory of Open Access Journals (Sweden)

    Yan Li

    2015-01-01

    Full Text Available With the rapid development of the electric vehicle industry and promotive policies worldwide, the electric bus (E-bus has been adopted in many major cities around the world. One of the most important factors that restrain the widespread application of the E-bus is the high operating cost due to the deficient battery management. This paper proposes a geometric-process-based (GP-based battery management optimizing policy which aims to minimize the average cost of the operation on the premise of meeting the required sufficient battery availability. Considering the deterioration of the battery after repeated charging and discharging, this paper constructs the model of the operation of the E-bus battery as a geometric process, and the premaintenance time has been considered with the failure repairment time to enhance the GP-based battery operation model considering the battery cannot be as good as new after the two processes. The computer simulation is carried out by adopting the proposed optimizing policy, and the result verifies the effectiveness of the policy, denoting its significant performance on the application of the E-bus battery management.

  7. Ecodriving for Reduction of Bus Transit Emission with Vehicle’s Hybrid Dynamic Model

    Directory of Open Access Journals (Sweden)

    Xiuzheng Zheng

    2015-01-01

    Full Text Available This paper formulates a global ecodriving optimal control to advise the green driving speed for bus transit to minimize the exhaust emission using Vehicle-to-Infrastructure (V2I communication. Assuming communication between vehicles and infrastructure (V2I and knowledge of traffic signal timings and waiting passengers at stations are known, an optimal driving speed is proposed to minimize the total vehicle emissions of the bus route. The dwell time of the bus transit at each station which includes two parts is proposed. A traffic lights timing model is employed as constraints to control the formation of the green wave band. Vehicle specific power (VSP model is further applied to evaluate the exhaust emission level linked with the speed and acceleration of the bus transit. An approximate sixteen-kilometer traffic network including fourteen intersections and fifteen stations of Beijing bus transit line 1 in Chaoyang District, Beijing, is chosen to investigate the performance of the developed ecodriving approach.

  8. Introduction to corridor selection & assessment for Bus Rapid Transit System (BRTS in Hyderabad

    Directory of Open Access Journals (Sweden)

    Bhanu Kireeti Chanda

    2014-06-01

    Full Text Available Bus rapid transit system is an innovation and it is up gradation to the present transport system. BRT is affordable, adaptable and cost effective. The term of rapid transit system means a form of high speed urban passenger transportation. Here, the mode of transportation is bus hence it is called as bus rapid transit system (BRTS. Transportation facilities and the system will be different form different countries. Especially for the developing countries, transportation is a problem and BRT is the best way to overcome it. If a country gets richer the development will be seen in different aspects like education, industry, science and technology etc., except transport which will get worse. There are many ways to get rid of these traffic issues and transport problems. What attracted the countries to install BRT is the bus way concept as that it can cover whole city and is cheaper than the rail. BRT is a high speed rapid transit system using high capacity vehicles, physically separated bus ways, modern station with electronic fare collection, rapid boarding and high service frequency which result more passengers and less congestion. This paper presents an overview of BRTS and corridor selection & assessment for it in Hyderabad through surveys etc.

  9. Utility and Weight of Factors of Bus Transit’ s Service Quality Analysis in Nanjing

    Institute of Scientific and Technical Information of China (English)

    Jianrong Liu; Tangyi Guo

    2015-01-01

    Service quality is a major factor that affects how public transport users evaluate bus service. In order to evaluate how bus users make trade⁃offs across travel cost, time, reliability, etc., and to investigate the extent to which the components of service quality vary according to relevant trip characteristics, this paper analyzes service quality of bus transit with the conjoint analysis. Through data analysis, the levels ’ utility values of reliability, waiting time, walking time, etc.,on the commuter trip and the non⁃commuter trip are gotten, so it is the utility function of the transit system. Then the factors’ weights are obtained through the utility values. The results show that on the commuter trip, passengers value reliability the most, which is followed by waiting time and walking time, while in⁃bus environment, price and station environment’ s weights are small. While on the non⁃commuter trip, the weights in a higher order to lower order are the first for reliability, the second for in⁃bus environment, the third for walking time, the fourth for station environment and the last for ticket price.

  10. An interconnecting bus power optimization method combining interconnect wire spacing with wire ordering

    Institute of Scientific and Technical Information of China (English)

    Zhu Zhang-Ming; Hao Bao-Tian; En Yun-Fei; Yang Yin-Tang; Li Yue-Jin

    2011-01-01

    On-chip interconnect buses consume tens of percents of dynamic power in a nanometer scale integrated circuit and they will consume more power with the rapid scaling down of technology size and continuously rising clock frequency,therefore it is meaningful to lower the interconnecting bus power in design. In this paper, a simple yet accurate interconnect parasitic capacitance model is presented first and then, based on this model, a novel interconnecting bus optimization method is proposed. Wire spacing is a process for spacing wires for minimum dynamic power, while wire ordering is a process that searches for wire orders that maximally enhance it. The method, i.e., combining wire spacing with wire ordering, focuses on bus dynamic power optimization with a consideration of bus performance requirements.The optimization method is verified based on various nanometer technology parameters, showing that with 50% slack of routing space, 25.71% and 32.65% of power can be saved on average by the proposed optimization method for a globalbus and an intermediate bus, respectively, under a 65-nm technology node, compared with 21.78% and 27.68% of power saved on average by uniform spacing technology. The proposed method is especially suitable for computer-aided designof nanometer scale on-chip buses.

  11. Nelson River and Hudson Bay

    Science.gov (United States)

    2002-01-01

    Rivers that empty into large bodies of water can have a significant impact on the thawing of nearshore winter ice. This true-color Moderate Resolution Imaging Spectroradiometer (MODIS) image from May 18, 2001, shows the Nelson River emptying spring runoff from the Manitoba province to the south into the southwestern corner of Canada's Hudson Bay. The warmer waters from more southern latitudes hasten melting of ice near the shore, though some still remained, perhaps because in shallow coastal waters, the ice could have been anchored to the bottom. High volumes of sediment in the runoff turned the inflow brown, and the rim of the retreating ice has taken on a dirty appearance even far to the east of the river's entrance into the Bay. The sediment would have further hastened the melting of the ice because its darker color would have absorbed more solar radiation than cleaner, whiter ice. Image courtesy Jacques Descloitres, MODIS Land Rapid Response Team at NASA GSFC

  12. Increasing throughput of multiplexed electrical bus in pipe-lined architecture

    Science.gov (United States)

    Asaad, Sameh; Brezzo, Bernard V; Kapur, Mohit

    2014-05-27

    Techniques are disclosed for increasing the throughput of a multiplexed electrical bus by exploiting available pipeline stages of a computer or other system. For example, a method for increasing a throughput of an electrical bus that connects at least two devices in a system comprises introducing at least one signal hold stage in a signal-receiving one of the two devices, such that a maximum frequency at which the two devices are operated is not limited by a number of cycles of an operating frequency of the electrical bus needed for a signal to propagate from a signal-transmitting one of the two devices to the signal-receiving one of the two devices. Preferably, the signal hold stage introduced in the signal-receiving one of the two devices is a pipeline stage re-allocated from the signal-transmitting one of the two devices.

  13. Analysis of bus width and delay on a fully digital signum nonlinearity chaotic oscillator

    KAUST Repository

    Mansingka, Abhinav S.

    2012-07-29

    This paper introduces the first fully digital implementation of a 3rd order ODE-based chaotic oscillator with signum nonlinearity. A threshold bus width of 12-bits for reliable chaotic behavior is observed, below which the system output becomes periodic. Beyond this threshold, the maximum Lyapunov exponent (MLE) is shown to improve up to a peak value at 16-bits and subsequently decrease with increasing bus width. The MLE is also shown to gradually increase with number of introduced internal delay cycles until a peak value at 14 cycles, after which the system loses chaotic properties. Introduced external delay cycles are shown to rotate the attractors in 3-D phase space. Bus width and delay elements can be independently modulated to optimize the system to suit specifications. The experimental results of the system show low area and high performance on a Xilinx Virtex 4 FPGA with throughput of 13.35 Gbits/s for a 32-bit implementation.

  14. Calculation of Flexible Bus-Bars Electrodynamic Stability with Application of Implicit Scheme

    Directory of Open Access Journals (Sweden)

    Y. G. Panamarenka

    2008-01-01

    Full Text Available A numerical method for calculation of open-air substations’ flexible bus-bars dynamic at short-circuit has been improved on equations of a flexible elastic string with application of an implicit scheme. On the basis of the numerical method a computer program FLEBUS for calculation of substations’ flexible bus-bars dynamic at short-circuit has been developed. An approbation and an estimation of calculation result reliability have been carried out in accordance with the program while using experimental data. On the basis of the obtained information it is possible to assert that the developed program is an independent tool for calculation of electrodynamic stability of substations’ flexible bus-bars.

  15. Fiber optic data bus space experiment on board the microlectronics and photonics test bed (MPTB)

    Science.gov (United States)

    Dale, Cheryl J.; Marshall, Paul W.; de la Chapelle, Michael; Fritz, Martin E.; LaBel, Kenneth A.

    1995-05-01

    The Microelectronics and Photonics Test Bed (MPTB) is a space experiment which will evaluate the performance of components and sybsystems of important new technologies is advance of their deployment of future spacecraft. Devices aboard MPTB will monitor the environment, and the radiation effects data obtained on components will be compared to ground tests and predictions. We present a description of the proposed high performance fiber optic data bus (FODB) experiment for MPTB which will feature the newly available 200 Mbps Boeing STAR-FODB hardware which is designed for space applications. This bus uses a passive star architecture and implements a Linear Token Passing Bus (LTPB) standard. The existence of extensive ground radiation test results for the STAR-FODB will enable high confidence predicition of its on-orbit performance to be made prior to launch.

  16. Bus Access Optimization for Distributed Embedded Systems Based on Schedulability Analysis

    DEFF Research Database (Denmark)

    Pop, Paul; Eles, Petru; Peng, Zebo

    2000-01-01

    We present an approach to bus access optimization and schedulability analysis for the synthesis of hard real-time distribution embedded systems. The communication model is based on a time-triggered protocol. We have developed an analysis for the communication delays proposing four different messa...... scheduling policies over a time-triggered communication channel. Optimization strategies for the bus access scheme are developed, and the four approaches to message scheduling are compared using extensive experiments.......We present an approach to bus access optimization and schedulability analysis for the synthesis of hard real-time distribution embedded systems. The communication model is based on a time-triggered protocol. We have developed an analysis for the communication delays proposing four different message...

  17. Steering Stability of a Bus Powered by Natural Gas While Braking

    Directory of Open Access Journals (Sweden)

    Ivan Ivković

    2011-03-01

    Full Text Available The use of natural gas as bus propellant presupposes the application of a driving unit adjusted to the use of natural gas in addition to the application of a corresponding gas facility. The first part of the paper describes the distinguishing features related to the storage of compressed natural gas tanks as the main carriers of additional mass due to the use of this energy substance for the propulsion of buses, as well as their effect on the structural features of vehicles. The second part of the paper covers the formulation and analysis of differential equations in terms of the steering system’s stability, and the equations depict the motion of the natural gas bus with its structural features, according to the defined models for instances of bus braking with locked front, rear and all wheels.

  18. Implemented Wavelet Packet Tree based Denoising Algorithm in Bus Signals of a Wearable Sensorarray

    Science.gov (United States)

    Schimmack, M.; Nguyen, S.; Mercorelli, P.

    2015-11-01

    This paper introduces a thermosensing embedded system with a sensor bus that uses wavelets for the purposes of noise location and denoising. From the principle of the filter bank the measured signal is separated in two bands, low and high frequency. The proposed algorithm identifies the defined noise in these two bands. With the Wavelet Packet Transform as a method of Discrete Wavelet Transform, it is able to decompose and reconstruct bus input signals of a sensor network. Using a seminorm, the noise of a sequence can be detected and located, so that the wavelet basis can be rearranged. This particularly allows for elimination of any incoherent parts that make up unavoidable measuring noise of bus signals. The proposed method was built based on wavelet algorithms from the WaveLab 850 library of the Stanford University (USA). This work gives an insight to the workings of Wavelet Transformation.

  19. Evacuated FM08 Fuses Carry a Sustained Arc in a Bus over 75 VDC

    Science.gov (United States)

    Leidecker, Henning; Slonaker, J.

    1999-01-01

    The FM08 style fuse is specified to interrupt an overcurrent of up to 300 A in a bus of up to 125 VDC, but this applies only when its barrel is filled with air. When placed into a space-grade vacuum, the FM08 style fuse exhausts its air within a year. Then, the probability of an enduring arc is high for all ratings when the bus is above 75 VDC, and the overcurrent is large. The arc endures until something else interrupts the current. The fuse can violently eject metal vapor or other material during the sustained arcing. The evacuated FM08 does not develop a sustained arc when interrupted in a bus of 38 VDC or less, at least when there is little inductance in the circuit. This is consistent with its successful use in many spacecraft having buses in the range 24 to 36 volts.

  20. 微型计算机PCI总线浅析%On Microcomputer PCI Bus

    Institute of Scientific and Technical Information of China (English)

    张宝菊; 孙景瑞; 刘艳

    2001-01-01

    较系统地分析了PCI总线的定义、分类及特点,论述了PCI总线的读写时序及总线仲裁问题,并将PCI总线应用在图象处理等方面,解决了数据通量的瓶颈问题.%This article analyses the definition,classification andpeculiarity of PCI bus systematically. And it expounds the problem of reading and writing proc ession and arbiitration of PCI bus. Further more, the PCI bus has been used in the im age treatment and any other fields,solving the difficult problem of data flux.

  1. IEEE 1394/firewire a low cost, high speed, digital serial bus

    Energy Technology Data Exchange (ETDEWEB)

    Gaunt, R.

    1997-05-01

    Does the world need yet another 1/0 bus standard? If you need fast and cheap serial video communication, then the answer is yes. As technology advances, so too must data transport mechanisms advance. You can`t expect RS-232 to support real-time digital video, and if you can`t afford expensive professional serial video interfaces, (such as Sony`s Serial Digital Interface), Firewire may be a good solution. IEEE 1394, or commonly known as Firewire, is a general purpose serial bus that meets many of the 1/0 needs of today`s video and multimedia developers. For those of you who only read the first paragraph, here`s Firewire in a nutshell: It provides a guaranteed transfer rate of 10OMbps or 20OMbps of digital data (such as video direct from camera to computer), over an inexpensive, non-proprietary serial bus. Here is a list of its features.

  2. Research on Integration of Coal Mine Monitoring and Control System with Field Bus Control System

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    According to the construction of current coal mine monitoring and control systems in China, the paper proposes three kinds of applicable schemes of integrating PLC and DCS systems with field bus technology to digitize the system and to improve the flexibility and extent of the system. Essentially, the paper introduces the integration of FCS on I/O layers. Based on a real coal mine safety-monitoring and control system applied with a CAN field bus, the major technology of system relays and extensions is discussed. We believe that one of the most applicable methods is currently replacing the connection between function-stations and field-sensors with a CAN bus on I/O layers for system integration.

  3. Design of belt conveyor electric control device based on CC-link bus

    Science.gov (United States)

    Chen, Goufen; Zhan, Minhua; Li, Jiehua

    2016-01-01

    In view of problem of the existing coal mine belt conveyor is no field bus communication function, two levels belt conveyor electric control system design is proposed based on field bus. Two-stage belt conveyor electric control system consists of operation platform, PLC control unit, various sensors, alarm device and the water spraying device. The error protection is realized by PLC programming, made use of CC-Link bus technology, the data share and the cooperative control came true between host station and slave station. The real-time monitor was achieved by the touch screen program. Practical application shows that the system can ensure the coalmine production, and improve the automatic level of the coalmine transport equipment.

  4. Simulation of Pollutant Transport in Marmaris Bay

    Institute of Scientific and Technical Information of China (English)

    Lale BALAS

    2001-01-01

    The circulation pattern and the pollutant transport in the Marmaris Bay are simulated by the developed three-dimensional baroclinic model. The Marmaris Bay is located at the Mediterranean Sea coast of Turkey. Since the sp ring tidal range is typically 20~30 cm, the dominant forcing for the circulation and water exchange is due to the wind action. In the Marmaris Bay, there is sea outfall discharging directly into the bay, and that threats the bay water quality significantly. The current patterns in the vicinity of the outfall have been observed by tracking drogues which are moved by currents at different water depths. In the simulations of pollutant transport, the coliforms-counts is used as the tracer.The model provides realistic predictions for the circulation and pollutant transport in the Marmaris Bay. The transport model component predictions well agree with the results of a laboratory model study.

  5. Risk Factors for Near Miss Incident among Long Distance Bus Drivers in Malaysia

    Directory of Open Access Journals (Sweden)

    Nik Nor Ronaidi NIK MAHDI

    2015-10-01

    Full Text Available Background: Road traffic accident is a worldwide public health issue that has its highest impact on low and middle income countries including Malaysia. Many previous studies concerned on the causality of the actual accidents and little attention were given to near miss incidents. Hence, the current study was designed to determine the prevalence and associated factors for near miss incident among long distance bus drivers in Malaysia.Methods: A cross sectional study was conducted among 517 long distance bus drivers. Data were collected using interview-guided translated and validated Pittsburgh Sleep Quality Index and Manchester Driver Behaviour questionnaire. Multiple logistic regression analysis was performed to determine the significant factors for near miss incident among long distance bus drivers in Malaysia.Results: The prevalence of near miss incident among long distance bus drivers was 37.5% (95% CI: 33.5, 41.8. The significant associated factors for near miss incident were younger age group (ORadj : 1.99; 95% CI: 1.32, 3.01, longer distance travelled per day (ORadj : 2.34; 95% CI: 1.52, 3.60, sleep disturbances (ORadj : 1.74; 95% CI: 1.19, 2.54 and errors in driving behaviour (ORadj : 1.31; 95% CI: 1.23, 1.39.Conclusion: Self-reported near miss incidents were relatively high among long distance bus drivers in Malaysia. This issue should be taken seriously and preventive action should consider the significant human factors such as younger age group, errors in driving behaviours, sleep disturbances as well as occupational factors like distance travelled per day. Keywords: Road traffic accident, Near miss, Bus drivers, Malaysia 

  6. A Feeder-Bus Dispatch Planning Model for Emergency Evacuation in Urban Rail Transit Corridors

    Science.gov (United States)

    Wang, Yun; Yan, Xuedong; Zhou, Yu; Zhang, Wenyi

    2016-01-01

    The mobility of modern metropolises strongly relies on urban rail transit (URT) systems, and such a heavy dependence causes that even minor service interruptions would make the URT systems unsustainable. This study aims at optimally dispatching the ground feeder-bus to coordinate with the urban rails’ operation for eliminating the effect of unexpected service interruptions in URT corridors. A feeder-bus dispatch planning model was proposed for the collaborative optimization of URT and feeder-bus cooperation under emergency situations and minimizing the total evacuation cost of the feeder-buses. To solve the model, a concept of dummy feeder-bus system is proposed to transform the non-linear model into traditional linear programming (ILP) model, i.e., traditional transportation problem. The case study of Line #2 of Nanjing URT in China was adopted to illustrate the model application and sensitivity analyses of the key variables. The modeling results show that as the evacuation time window increases, the total evacuation cost as well as the number of dispatched feeder-buses decrease, and the dispatched feeder-buses need operate for more times along the feeder-bus line. The number of dispatched feeder-buses does not show an obvious change with the increase of parking spot capacity and time window, indicating that simply increasing the parking spot capacity would cause huge waste for the emergent bus utilization. When the unbalanced evacuation demand exists between stations, the more feeder-buses are needed. The method of this study will contribute to improving transportation emergency management and resource allocation for URT systems. PMID:27676179

  7. Lithospheric Architecture Beneath Hudson Bay

    Science.gov (United States)

    Porritt, R. W.; Miller, M. S.; Darbyshire, F. A.

    2015-12-01

    Hudson Bay overlies some of the thickest Precambrian lithosphere on Earth, whose internal structures contain important clues to the earliest workings of plate formation. The terminal collision, the Trans-Hudson Orogen, brought together the Western Churchill craton to the northwest and the Superior craton to the southeast. These two Archean cratons along with the Paleo-Proterozoic Trans-Hudson internides, form the core of the North American craton. We use S to P converted wave imaging and absolute shear velocity information from a joint inversion of P to S receiver functions, new ambient noise derived phase velocities, and teleseismic phase velocities to investigate this region and determine both the thickness of the lithosphere and the presence of internal discontinuities. The lithosphere under central Hudson Bay approaches 􏰂350 km thick but is thinner (􏰂200-250 km) around the periphery of the Bay. Furthermore, the amplitude of the lithosphere-asthenosphere boundary (LAB) conversion from the S receiver functions is unusually large for a craton, suggesting a large thermal contrast across the LAB, which we interpret as direct evidence of the thermal insulation effect of continents on the asthenosphere. Within the lithosphere, midlithospheric discontinuities, significantly shallower than the base of the lithosphere, are often imaged, suggesting the mechanisms that form these layers are common. Lacking time-history information, we infer that these discontinuities reflect reactivation of formation structures during deformation of the craton.

  8. 76 FR 28947 - Bus Testing: Calculation of Average Passenger Weight and Test Vehicle Weight, and Public Meeting...

    Science.gov (United States)

    2011-05-19

    ..., 2011 (76 FR 13580). Furthermore, due to the complexity of the issues proposed in the NPRM, FTA is..., FTA published an NPRM in the Federal Register (76 FR 13850) proposing to amend its bus testing... Federal Transit Administration 49 CFR Part 665 RIN 2132-AB01 Bus Testing: Calculation of Average...

  9. Bus crash severity in the United-States: The role of driver behavior, service type, road factors and environmental conditions

    DEFF Research Database (Denmark)

    Kaplan, Sigal; Prato, Carlo Giacomo

    Recent years have witnessed a growing interest in improving bus safety operations worldwide. While in the United States buses are considered relatively safe, the number of bus accidents is far from being negligible, triggering the introduction of the Motor-coach Enhanced Safety Act of 2011.The cu...

  10. ABB i-bus EIB智能酒店灯光控制系统设计方案

    Institute of Scientific and Technical Information of China (English)

    华卫智能设备

    2007-01-01

    @@ i-bus系统介绍 欧洲安装总线(EIB,European Instlallation Bus)在亚洲称为电气安装总线(Electrical Installation Bus),是电气布线领域使用范围最广的行业规范和产品标准.

  11. Evaluating a GPS-Based Transportation Device to Support Independent Bus Travel by People with Intellectual Disability

    Science.gov (United States)

    Davies, Daniel K.; Stock, Steven E.; Holloway, Shane; Wehmeyer, Michael L.

    2010-01-01

    We examined the utility of a PDA-based software system with integrated GPS technology for providing location-aware visual and auditory prompts to enable people with intellectual disability to successfully navigate a downtown bus route. Participants using the system were significantly more successful at completing a bus route than were people in a…

  12. Experiences with formal engineering: model-based specification, implementation and testing of a software bus at Neopost

    NARCIS (Netherlands)

    Sijtema, M.; Belinfante, A.; Stoelinga, M.I.A.; Marinelli, L.; Salaün, G.; Schätz, B.

    2014-01-01

    We report on the actual industrial use of formal methods during the development of a software bus. During an internship at Neopost Inc., of 14 weeks, we developed the server component of a software bus, called the XBus, using formal methods during the design, validation and testing phase: we modeled

  13. San Francisco and Bay Area, CA, USA

    Science.gov (United States)

    1991-01-01

    Although clouds obscure part of the city of San Francisco and the mouth of the Bay (37.5N, 122.0W), many cultural and natural features in the immediate vicinity are obvious. The Bay Bridge which was damaged in the 1989 earthquake, Candlestick Park, San Mateo and Dumbarton Bridges as well as the various colored settling ponds rimming the south end of the Bay, the San Andreas and Calaveras faults and many of the major highways can be seen.

  14. Risk factors associated with bus accident severity in the United States: A generalized ordered logit model

    DEFF Research Database (Denmark)

    Kaplan, Sigal; Prato, Carlo Giacomo

    2012-01-01

    that accident severity increases: (i) for young bus drivers under the age of 25; (ii) for drivers beyond the age of 55, and most prominently for drivers over 65 years old; (iii) for female drivers; (iv) for very high (over 65 mph) and very low (under 20 mph) speed limits; (v) at intersections; (vi) because...... of 2011. Method: The current study investigates the underlying risk factors of bus accident severity in the United States by estimating a generalized ordered logit model. Data for the analysis are retrieved from the General Estimates System (GES) database for the years 2005–2009. Results: Results show...

  15. Research and design on a kind of CASE environment architectural style based on ToolBus

    Institute of Scientific and Technical Information of China (English)

    Guo Bing; Shen Yan; Xie Jun; Wang Yong; Xiong Guangze

    2005-01-01

    Because CASE (computer aided software engineering) environment is a kind of complex system software, its software architecture is very important. From the viewpoint of software architecture, this paper first presents TBus architectural style, which is a kind of CASE environment architectural style based on ToolBus, then describes the architectural model and system's behavior in formal method, researches and analyzes the corresponding tool structural model. Last the paper implements a TBus architectural instance-LambdaBridge, which proves the validity of ToolBus and TBus architectural styles.

  16. Converter Power Density Increase using Low Inductive Integrated DC-link Capacitor/Bus

    DEFF Research Database (Denmark)

    Trintis, Ionut; Franke, Toke; Rannested, Bjørn;

    2015-01-01

    The power losses in switching devices have a direct effect on the maximum converter power. For a voltage source converter, the DC-link bus has a major influence on the power loss and safe operating area of the power devices. The Power Ring Film CapacitorTM integrated with an optimized bus structu...... has a measured inductance of around 5 nH. That allows the converter to switch with low turn-off losses, and allows the safe operation at higher dc-link voltages. This paper investigates the power transfer limits of a ShowerPower® cooled power stack....

  17. Simplified extension of the LSI-11 Q-Bus for a high energy laser control application

    International Nuclear Information System (INIS)

    Antares, a large, experimental laser fusion facility under construction at Los Alamos National Laboratory in New Mexico, is controlled by a network of PDP-11 minicomputers and microprocessors. The remote nodes of the Antares control network are based on an LSI-11/2 microcomputer interfaced to an STD Bus. This machine interface or MI forms the intelligent process controller located directly adjacent to the many diverse laser subsystem devices. The STD Bus, linked to the LSI-11/2 microcomputer, offers a standardized, cost effective means for the development of the specialized interface functions required for the high energy laser environment

  18. Mobile Encounters: Bus 5A as a cross-cultural meeting place

    DEFF Research Database (Denmark)

    Koefoed, Lasse Martin; Simonsen, Kirsten; Christensen, Mathilde Dissing

    2016-01-01

    The paper explores modes of encounters in the everyday practice of bus travel. Particularly, it addresses cross-cultural encounters located in the tension between familiarity and difference, between inclusion and exclusion. The paper is located in contemporary thoughts, approaching public transport...... not only as a moving device but also as a social arena. Furthermore, the bus is simultaneously perceived as a public space, at once composite, contradictory and heterogeneous, and as a meeting place involving ‘Throwntogetherness’. The encounters analysed are bodily, emotional charged and outspoken meetings...

  19. Study on Ultracapacitors Parameter Design and Control Strategy of Electric Bus

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Based on the analysis of ultracapacitors efficiency and vehicle driving character, three conditions restricting the ultracapacitors charge/discharge time are derived. The study focuses on ultracapacitors specific design rules decided by charge/discharge time and how to integrate with battery packs and converter through ultracapacitors' voltage and current double regulators. Through BFC6100-EV electric bus test, it is shown that the proposed method and control strategy are feasible and the system can effectively improve the bus dynamic performance and ability to receive braking energy effectively.

  20. Realization and optimization of bus bar current transducers based on Hall effect sensors

    Science.gov (United States)

    Blagojević, Marjan; Jovanović, Uglješa; Jovanović, Igor; Mančić, Dragan; Popović, Radivoje S.

    2016-06-01

    In this paper the realization and optimization of two coreless open-loop bus bar current transducers based on a Hall effect sensor are presented. Two types of bus bar are evaluated: flat rectangular and rectangular with a restrictive region in the middle. Both realized transducers are capable of measuring AC and DC currents up to 300 A and 10 kHz frequency with nonlinearity less than 0.3% in the entire range. Several methods for resolving issues with the skin effect and stray magnetic fields are presented along with the experimental test results. Some of the presented methods are novel and have never been evaluated.

  1. Application of DD6180S city bus field bus technology%DD6180S城市客车总线技术应用

    Institute of Scientific and Technical Information of China (English)

    董秀芳; 王日新

    2011-01-01

    Emphatically introduced the CAN network composition of Huanghai DD6180S articulated city bus, combine with vehicle electric sub-control system,introduce the design of CAN circuit,expound the function definition of CAN control module interface in bus electric control system and connection to vehicle device.%着重介绍了黄海DD6180S铰接城市客车CAN总线网络构成,结合整车电器分控系统,介绍了CAN总线电路设计,阐述了CAN总线在客车电器控制系统中控制模块接口功能定义及与车辆设备连接。

  2. Application of ABB i-bus(R)EIB/KNX in Commercial Plaza%ABB i-bus(R)EIB/KNX在商业广场中的应用

    Institute of Scientific and Technical Information of China (English)

    张全林; 杜乐

    2008-01-01

    简要介绍了ABB i-bus(R)EIB/KNX智能建筑控制系统的基本原理及特点,并通过ABB i-bus(R)系统在西安骡马市商业步行街的应用,阐述了该系统在智能照明控制方面的功能、设备特点及优势.并通过该智能照明控制系统在安装前后电费开支的理论计算值分析,比较了采用该系统的节能效果.

  3. 33 CFR 80.1114 - San Pedro Bay-Anaheim Bay, CA.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false San Pedro Bay-Anaheim Bay, CA. 80.1114 Section 80.1114 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY INTERNATIONAL NAVIGATION RULES COLREGS DEMARCATION LINES Pacific Coast § 80.1114 San Pedro Bay—Anaheim Bay, CA. (a) A line drawn across the...

  4. 77 FR 70891 - Safety Zone; Bay Bridge Construction, San Francisco Bay, San Francisco, CA

    Science.gov (United States)

    2012-11-28

    ... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone; Bay Bridge Construction, San Francisco Bay..., CA in support of the Bay Bridge Construction Safety Zone from November 1, 2012 through July 31, 2013...: Table of Acronyms DHS Department of Homeland Security FR Federal Register NPRM Notice of...

  5. Chesapeake Bay Program Water Quality Database

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Chesapeake Information Management System (CIMS), designed in 1996, is an integrated, accessible information management system for the Chesapeake Bay Region....

  6. Polychlorinated biphenyls (PCBs) in San Francisco Bay.

    Science.gov (United States)

    Davis, J A; Hetzel, F; Oram, J J; McKee, L J

    2007-09-01

    San Francisco Bay is facing a legacy of polychlorinated biphenyls (PCBs) spread widely across the land surface of the watershed, mixed deep into the sediment of the Bay, and contaminating the Bay food web to a degree that poses health risks to humans and wildlife. In response to this persistent problem, water quality managers are establishing a PCB total maximum daily load (TMDL) and implementation plan to accelerate the recovery of the Bay from decades of PCB contamination. This article provides a review of progress made over the past 15 years in managing PCBs and understanding their sources, pathways, fate, and effects in the Bay, and highlights remaining information needs that should be addressed in the next 10 years. The phaseout of PCBs during the 1970s and the 1979 federal ban on sale and production led to gradual declines from the 1970s to the present. However, 25 years after the ban, PCB concentrations in some Bay sport fish today are still more than ten times higher than the threshold of concern for human health. Without further management action it appears that the general recovery of the Bay from PCB contamination will take many more decades. PCB concentrations in sport fish were, along with mercury, a primary cause of a consumption advisory for the Bay and the consequent classification of the Bay as an impaired water body. Several sources of information indicate that PCB concentrations in the Bay may also be high enough to adversely affect wildlife, including rare and endangered species. The greater than 90% reduction in food web contamination needed to meet the targets for protection of human health would likely also generally eliminate risks to wildlife. PCB contamination in the Bay is primarily associated with industrial areas along the shoreline and in local watersheds. Strong spatial gradients in PCB concentrations persist decades after the release of these chemicals to Bay Area waterways. Through the TMDL process, attention is being more sharply

  7. Assessment on the occupational exposure of urban public bus drivers to bioaccessible trace metals through resuspended fraction of settled bus dust

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Peng [State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, No. 73 Huanghe Road, Nangang District, Harbin 150090 (China); Stockbridge School of Agriculture, University of Massachusetts, Amherst, MA 01003 (United States); Liu, Sa [Environmental Health Sciences Division, School of Public Health, University of California, Berkeley, CA, 94720-7360 (United States); Ye, Wenyuan [Department of Chemical Engineering, KU Leuven, Willem de Croylaan 46, B-3001 Heverlee (Belgium); Lin, Nan; Meng, Ping [State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, No. 73 Huanghe Road, Nangang District, Harbin 150090 (China); Feng, Yujie, E-mail: yujief@hit.edu.cn [State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, No. 73 Huanghe Road, Nangang District, Harbin 150090 (China); Zhang, Zhaohan; Cui, Fuyi; Lu, Binyu [State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, No. 73 Huanghe Road, Nangang District, Harbin 150090 (China); Xing, Baoshan [Stockbridge School of Agriculture, University of Massachusetts, Amherst, MA 01003 (United States)

    2015-03-01

    Limited information is available on the bioaccessible fraction of trace metals in the resuspended fraction of settled bus dust in order to estimate bus drivers ' occupational exposure. In this study, 45 resuspended fraction of settled dust samples were collected from gasoline and compressed natural gas (CNG) powered buses and analyzed for trace metals and their fraction concentrations using a three-step sequential extraction procedure. Experimental results showed that zinc (Zn) had the greatest bioaccessible fraction, recorded as an average of 608.53 mg/kg, followed in order of decreasing concentration by 129.80 mg/kg lead (Pb), 56.77 mg/kg copper (Cu), 34.03 mg/kg chromium (Cr), 22.05 mg/kg nickel (Ni), 13.17 mg/kg arsenic (As) and 2.77 mg/kg cadmium (Cd). Among the three settled bus dust exposure pathways, ingestion was the main route. Total exposure hazard index (HIt) for non-carcinogenic effect trace metals was lower than the safety level of 1. The incremental lifetime cancer risk (ILCR) for drivers was estimated for trace metal exposure. Pb and Ni presented relatively high potential risks in the non-carcinogenic and potentially carcinogenic health assessment for all drivers. ILCR was in the range of 1.84E − 05 to 7.37E − 05 and 1.74E − 05 to 6.95E − 05 for gasoline and CNG buses, respectively. - Highlights: • As, Cd and Ni had relatively higher bioaccessibility and mobility in the resuspended fraction of settled bus dust. • Bioaccessible metal concentrations were higher in gasoline-fueled buses than those in CNG-fueled buses. • The carcinogenic risk probabilities to drivers were around the acceptable level.

  8. Assessment on the occupational exposure of urban public bus drivers to bioaccessible trace metals through resuspended fraction of settled bus dust

    International Nuclear Information System (INIS)

    Limited information is available on the bioaccessible fraction of trace metals in the resuspended fraction of settled bus dust in order to estimate bus drivers ' occupational exposure. In this study, 45 resuspended fraction of settled dust samples were collected from gasoline and compressed natural gas (CNG) powered buses and analyzed for trace metals and their fraction concentrations using a three-step sequential extraction procedure. Experimental results showed that zinc (Zn) had the greatest bioaccessible fraction, recorded as an average of 608.53 mg/kg, followed in order of decreasing concentration by 129.80 mg/kg lead (Pb), 56.77 mg/kg copper (Cu), 34.03 mg/kg chromium (Cr), 22.05 mg/kg nickel (Ni), 13.17 mg/kg arsenic (As) and 2.77 mg/kg cadmium (Cd). Among the three settled bus dust exposure pathways, ingestion was the main route. Total exposure hazard index (HIt) for non-carcinogenic effect trace metals was lower than the safety level of 1. The incremental lifetime cancer risk (ILCR) for drivers was estimated for trace metal exposure. Pb and Ni presented relatively high potential risks in the non-carcinogenic and potentially carcinogenic health assessment for all drivers. ILCR was in the range of 1.84E − 05 to 7.37E − 05 and 1.74E − 05 to 6.95E − 05 for gasoline and CNG buses, respectively. - Highlights: • As, Cd and Ni had relatively higher bioaccessibility and mobility in the resuspended fraction of settled bus dust. • Bioaccessible metal concentrations were higher in gasoline-fueled buses than those in CNG-fueled buses. • The carcinogenic risk probabilities to drivers were around the acceptable level

  9. A Rule-Based Energy Management Strategy for a Plug-in Hybrid School Bus Based on a Controller Area Network Bus

    OpenAIRE

    Jiankun Peng; Hao Fan; Hongwen He; Deng Pan

    2015-01-01

    This paper presents a rule-based energy management strategy for a plug-in hybrid school bus (PHSB). In order to verify the effectiveness and rationality of the proposed energy management strategy, the powertrain and control models were built with MATLAB/Simulink. The PHSB powertrain model includes an engine model, ISG (integrated started and generator) model, drive motor model, power battery packs model, driver model, and vehicle longitudinal dynamics model. To evaluate the controller area ne...

  10. A comparison of core degradation phenomena in the CORA, QUENCH, Phébus SFD and Phébus FP experiments

    Energy Technology Data Exchange (ETDEWEB)

    Haste, T., E-mail: tim.haste@irsn.fr [Institut de Radioprotection et de Sûreté Nucléaire, IRSN, BP 3, F-13115 St. Paul-lez-Durance Cedex (France); Steinbrück, M., E-mail: martin.steinbrueck@kit.edu [Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen (Germany); Barrachin, M., E-mail: marc.barrachin@irsn.fr [Institut de Radioprotection et de Sûreté Nucléaire, IRSN, BP 3, F-13115 St. Paul-lez-Durance Cedex (France); Luze, O. de, E-mail: olivier.de-luze@irsn.fr [Institut de Radioprotection et de Sûreté Nucléaire, IRSN, BP 3, F-13115 St. Paul-lez-Durance Cedex (France); Grosse, M., E-mail: mirco.grosse@kit.edu [Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen (Germany); Stuckert, J., E-mail: juri.stuckert@kit.edu [Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen (Germany)

    2015-03-15

    Highlights: • The results of the experiments CORA, QUENCH and Phébus SFD/FP are summarised. • All phenomena expected up to melt movement to the lower head are shown consistently. • Separate-effect tests performed at KIT and IRSN aid improve their modelling. • Data from the integral tests help independent validation of new and improved models. • The improved codes will help reduce uncertainties in safety-critical areas for core degradation. - Abstract: Over the past 20 years, integral fuel bundle experiments performed at IRSN Cadarache, France (Phébus-SFD and Phébus FP – fission heated) and at Karlsruhe Institute of Technology, Germany (CORA and QUENCH – electrically heated), accompanied by separate-effect tests, have provided a wealth of detailed information on core degradation phenomena that occur under severe accident conditions, relevant to such safety issues as in-vessel retention of the core, recovery of the core by water reflood, hydrogen generation and fission product release. These data form an important basis for development and validation of severe accident analysis codes such as ASTEC (IRSN/GRS, EC) and MELCOR (USNRC/SNL, USA) that are used to assess the safety of current and future reactor designs, so helping to reduce the uncertainty associated with such code predictions. Following the recent end of the Phébus FP project, it is appropriate now to compare the core degradation phenomena observed in these four major experimental series, indicating the main conclusions that have been drawn. This covers subjects such as early phase degradation up to loss of rod-like geometry (all the series), late phase degradation and the link between fission product release and core degradation (Phébus FP), oxidation phenomena (all the series), reflood behaviour (CORA and QUENCH), as well as particular topics such as the effects of control rod material and fuel burn-up on core degradation. It also outlines the separate-effects experiments performed to

  11. 77 FR 5295 - Over-the-Road Bus Accessibility Program Announcement of Project Selections

    Science.gov (United States)

    2012-02-02

    ... by Section 3038 of the Transportation Equity Act for the 21st Century (TEA-21). The OTRB... FTA's Transportation Electronic Awards Management System (TEAM) for the projects identified in Tables... TRANSPORTATION Federal Transit Administration Over-the-Road Bus Accessibility Program Announcement of...

  12. High voltage bus and auxiliary heater control system for an electric or hybrid vehicle

    Science.gov (United States)

    Murty, Balarama Vempaty

    2000-01-01

    A control system for an electric or hybrid electric vehicle includes a vehicle system controller and a control circuit having an electric immersion heater. The heater is electrically connected to the vehicle's high voltage bus and is thermally coupled to a coolant loop containing a heater core for the vehicle's climate control system. The system controller responds to cabin heat requests from the climate control system by generating a pulse width modulated signal that is used by the control circuit to operate the heater at a duty cycle appropriate for the amount of cabin heating requested. The control system also uses the heater to dissipate excess energy produced by an auxiliary power unit and to provide electric braking when regenerative braking is not desirable and manual braking is not necessary. The control system further utilizes the heater to provide a safe discharge of a bank of energy storage capacitors following disconnection of the battery or one of the high voltage connectors used to transmit high voltage operating power to the various vehicle systems. The control circuit includes a high voltage clamping circuit that monitors the voltage on the bus and operates the heater to clamp down the bus voltage when it exceeds a pre-selected maximum voltage. The control system can also be used to phase in operation of the heater when the bus voltage exceeds a lower threshold voltage and can be used to phase out the auxiliary power unit charging and regenerative braking when the battery becomes fully charged.

  13. What is a clean bus? Object conflicts in the greening of urban transit

    Directory of Open Access Journals (Sweden)

    David Hess

    2007-03-01

    Full Text Available Object conflicts—struggles over the design, definition, and diffusion of technologies—are analyzed to understand the changing history of the greening of bus technologies in the United States from the late 1980s to 2006. Conflicts are examined over the controversy between compressed natural gas (CNG and emissions-controlled diesel (ECD buses in four fields: regulations, research on emissions differences, fleet-purchase decisions, and political mobilizations from bus users and environmental justice groups. Given rapidly changing scientific research on emissions and health effects and rapidly changing bus technology, controversies tend not to stabilize or close for long. In general, the trend has been for some of the largest city bus fleets to reverse pro-CNG decisions in favor of ECD. A framework for the analysis of “object conflicts” is developed to elucidate the factors behind the choices between ECD and CNG and to provide a general model for thinking about technology politics and sustainability.

  14. 49 CFR 571.220 - Standard No. 220; School bus rollover protection.

    Science.gov (United States)

    2010-10-01

    .... S3. Applicability. This standard applies to school buses. S4. Requirements. When a force in Newtons.... S1. Scope. This standard establishes performance requirements for school bus rollover protection. S2... procedures. Each vehicle shall be capable of meeting the requirements of S4. when tested in accordance...

  15. Bus.py: A GridLAB-D Communication Interface for Smart Distribution Grid Simulations

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, Timothy M.; Palmintier, Bryan; Suryanarayanan, Siddharth; Maciejewski, Anthony A.; Siegel, Howard Jay

    2015-07-03

    As more Smart Grid technologies (e.g., distributed photovoltaic, spatially distributed electric vehicle charging) are integrated into distribution grids, static distribution simulations are no longer sufficient for performing modeling and analysis. GridLAB-D is an agent-based distribution system simulation environment that allows fine-grained end-user models, including geospatial and network topology detail. A problem exists in that, without outside intervention, once the GridLAB-D simulation begins execution, it will run to completion without allowing the real-time interaction of Smart Grid controls, such as home energy management systems and aggregator control. We address this lack of runtime interaction by designing a flexible communication interface, Bus.py (pronounced bus-dot-pie), that uses Python to pass messages between one or more GridLAB-D instances and a Smart Grid simulator. This work describes the design and implementation of Bus.py, discusses its usefulness in terms of some Smart Grid scenarios, and provides an example of an aggregator-based residential demand response system interacting with GridLAB-D through Bus.py. The small scale example demonstrates the validity of the interface and shows that an aggregator using said interface is able to control residential loads in GridLAB-D during runtime to cause a reduction in the peak load on the distribution system in (a) peak reduction and (b) time-of-use pricing cases.

  16. Design of interference-imaging spectrum data transmission Card Based on PCI Bus

    Institute of Scientific and Technical Information of China (English)

    Ma,Dongmei; Gao,Wei; Wang,Xinfeng

    2005-01-01

    Take the interference-imaging spectrometer for example, the paper analyses the characters of the spectrum-forming signals and their timing sequence. Then inspects the key technology in the interference-imaging spectrum data transmission system, and indicates a design for the system-which is based on computer PCI bus with CPLD technique imbedded. The system's circuitry and function are also presented.

  17. The Effectiveness of External Bus Speaker Systems for Persons Who Are Visually Impaired.

    Science.gov (United States)

    Wiener, William R.; Ponchillia, Paul; Joffee, Elga; Rutberg-Kuskin, Judith; Brown, John

    2000-01-01

    Two studies examined the effectiveness of external-speaker announcements in identifying incoming buses to 21 adults with visual impairments, including the placement of external speakers, the ability to understand simultaneous bus announcements, and the speech enhancement of announcements. Announcements could be heard above ambient traffic sounds…

  18. 76 FR 13580 - Bus Testing; Calculation of Average Passenger Weight and Test Vehicle Weight

    Science.gov (United States)

    2011-03-14

    ... Federal Register (74 FR 51083) that incorporated brake performance and emissions tests into FTA's bus... Weight Per Person (See, ``Passenger Weight and Inspected Vessel Stability Requirements: Final Rule, 75 FR... Transportation (44 FR 11032). Executive Order 12866 requires agencies to regulate in the ``most...

  19. Evolution of a 100 Mpbps fiber optic serial data bus for aerospace applications

    Science.gov (United States)

    Uhlhorn, R. W.; Geeslin, A. E.; Otten, T. H.

    Future aircraft and spacecraft will incorporate high speed data buses connecting avionics subsystems immersed in an electromagnetically hostile environment. The benefits of using fiber optics as the data transfer medium of choice for such systems are well known. Anticipating the use of high speed fiber optic data buses in avionics systems of the future, a company-sponsored program was initiated to explore component-through-system aspects of the technology. This paper describes the evolutionary steps in the development of a 100 Mbps Serial Fiber Optic Data Bus for aerospace applications. Beginning with a discussion of several possible protocols and applications, the development of each major subsystem is discussed. A token passing protocol is used to maximize bus efficiency. Development hardware supporting a 32 terminal network including an LED transmitter, APD receiver and user interface equipment, as well as test results from evaluation of the bus receivers and transmitters in a bus signaling environment, are described. Testing methods are discussed and test results are presented.

  20. Life-cycle assessment of diesel, natural gas and hydrogen fuel cell bus transportation systems

    Science.gov (United States)

    Ally, Jamie; Pryor, Trevor

    The Sustainable Transport Energy Programme (STEP) is an initiative of the Government of Western Australia, to explore hydrogen fuel cell technology as an alternative to the existing diesel and natural gas public transit infrastructure in Perth. This project includes three buses manufactured by DaimlerChrysler with Ballard fuel cell power sources operating in regular service alongside the existing natural gas and diesel bus fleets. The life-cycle assessment (LCA) of the fuel cell bus trial in Perth determines the overall environmental footprint and energy demand by studying all phases of the complete transportation system, including the hydrogen infrastructure, bus manufacturing, operation, and end-of-life disposal. The LCAs of the existing diesel and natural gas transportation systems are developed in parallel. The findings show that the trial is competitive with the diesel and natural gas bus systems in terms of global warming potential and eutrophication. Emissions that contribute to acidification and photochemical ozone are greater for the fuel cell buses. Scenario analysis quantifies the improvements that can be expected in future generations of fuel cell vehicles and shows that a reduction of greater than 50% is achievable in the greenhouse gas, photochemical ozone creation and primary energy demand impact categories.

  1. 49 CFR Appendix A to Part 665 - Tests To Be Performed at the Bus Testing Facility

    Science.gov (United States)

    2010-10-01

    .... When appropriate, Society of Automotive Engineers (SAE) test procedures and other procedures accepted... and Distortion Tests (1) A shakedown of the bus structure should be conducted by loading and unloading... structure. This test should be repeated a second time, and should be repeated up to one more time if...

  2. Re?bus disainivõistlus ehk noored innovaatorid bussirevolutsiooni otsinguil

    Index Scriptorium Estoniae

    2005-01-01

    2005. a. algul agentuuri APCI (Agence pour la Promotion de la Creation Industrielle) poolt korraldatud disainivõistlusest Re?bus. Eestist valiti 30 finalisti hulka büroo ZiZi & YoYo töö. Edukamad võistlustööd olid juuni algul väljas rahvusvahelise ühistranspordi assotsiatsiooni (UITP) 56. kongressil Roomas

  3. Connecticut Transit (CTTRANSIT) Fuel Cell Transit Bus: Second Evaluation Report and Appendices

    Energy Technology Data Exchange (ETDEWEB)

    Chandler, K.; Eudy, L.

    2009-05-01

    This report describes operations at Connecticut Transit (CTTRANSIT) in Hartford for one prototype fuel cell bus and three new diesel buses operating from the same location. The evaluation period in this report (January 2008 through February 2009) has been chosen to coincide with a UTC Power propulsion system changeout that occurred on January 15, 2008.

  4. Public perception related to a hydrogen hybrid internal combustion engine transit bus demonstration and hydrogen fuel

    International Nuclear Information System (INIS)

    Hydrogen has been widely considered as a potentially viable alternative to fossil fuels for use in transportation. In addition to price competitiveness with fossil fuels, a key to its adoption will be public perceptions of hydrogen technologies and hydrogen fuel. This paper examines public perceptions of riders of a hydrogen hybrid internal combustion engine bus and hydrogen as a fuel source

  5. Voltage Sag Mitigation in Eight Bus System using D-Statcom For Power Quality Improvement

    Directory of Open Access Journals (Sweden)

    P. Venkata Kishore

    2010-04-01

    Full Text Available This work deals with modeling and simulation of multi bus system using D-STATCOM. Voltage sag is increased by connecting a heavy load. The sag is mitigated using D-STATCOM. The circuit models and simulation results are presented. The Simulation results are compared with the analytical results.

  6. More than Just Fun and Games: BSG and Glo-Bus as Strategic Education Instruments

    Science.gov (United States)

    Karriker, Joy H.; Aaron, Joshua R.

    2014-01-01

    Simulations like the BSG and Glo-Bus allow students the opportunity to practice their integrated, strategic management skills in a relatively risk-free environment or "live case." We review these games and address their strengths, along with the challenges associated with their classroom application. Because of their sound designs and…

  7. Bus application of oxygen-enrichment technology and diesel-electric hybrid systems

    Energy Technology Data Exchange (ETDEWEB)

    Sekar, R.R.; Marr, W.W.

    1993-10-01

    The amendments to the Clean Air Act (CAA) mandate very strict limits on particulate, smoke, and other emissions from city buses. The use of alternative fuels, such as compressed natural gas (CNG) or methanol, can help transit operators, such as the Chicago Transit Authority (CTA), meet the mandated limits. However, the capital investment needed to convert the fueling infrastructure and buses is large, as is the expense of training personnel. If a {open_quotes}clean diesel{close_quotes} bus can be implemented with the help of oxygen-enrichment technology or a diesel-electric hybrid system, this large investment could be postponed for many years. The Regional Transportation Authority (RTA) initiated this project to evaluate the possibility of applying these technologies to CTA buses. Argonne National Laboratory (ANL) conducted a limited number of engine tests and computer analyses and concluded that both concepts are practical and will help in a {open_quotes}clean diesel{close_quotes} bus that can meet the mandated limits of the CAA amendments. The oxygen enrichment of combustion air depends on the availability of a compact and economical membrane separator. Because the technology for this critical component is still under development, it is recommended that an actual bus demonstration be delayed until prototype membranes are available. The hybrid propulsion system is ready for the demonstration phase, and it is recommended that the CTA and RTA commence planning for a bus demonstration.

  8. Alternative fuel options for urban bus application in the Netherlands: a comparative study

    NARCIS (Netherlands)

    Bleuanus, W.A.J.; Hartikka, T.S.; Lange, R. de; Ligterink, N.E.; Breunesse, R.T.; Baert, R.S.G.

    2008-01-01

    Today, a large number of urban areas in the Netherlands face significant local air quality problems. One source of this local pollution is road traffic and, in urban areas, public transport by city bus. For this reason, there is a lot of interest in different opportunities to lower the harmful emiss

  9. Bus drivers' exposure to bullying at work: an occupation-specific approach.

    Science.gov (United States)

    Glasø, Lars; Bele, Edvard; Nielsen, Morten Birkeland; Einarsen, Ståle

    2011-10-01

    The present study employs an occupation-specific approach to examine bus drivers' exposure to bullying and their trait anger, job engagement, job satisfaction and turnover intentions. A total of 1,023 bus drivers from a large public transport organization participated in the study. The findings show that bus driving can be a high risk occupation with regard to bullying, since 70% of the bus drivers had experienced one or more acts typical of bullying during the last six months. As many as 11% defined themselves as victims of bullying, 33% of whom (i.e. 3.6% of the total sample) see themselves as victims of frequent bullying. Colleagues were most frequently reported as perpetrators. Exposure to bullying was negatively related to job engagement and job satisfaction and positively related to turnover intentions. Job engagement and job satisfaction mediated the relationship between bullying and intention to leave, respectively. Trait anger had an interaction effect on the relationship between bullying and turnover intentions. This study indicates that workplace bullying has context-specific aspects that require increased use of context-specific policies and intervention methods. PMID:21605122

  10. SunLine Transit Agency Fuel Cell Transit Bus: Fifth Evaluation Report (Report and Appendices)

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, L.; Chandler, K.

    2009-08-01

    This report describes operations at SunLine Transit Agency for a prototype fuel cell bus and five compressed natural gas (CNG) buses. This is the fifth evaluation report for this site, and it describes results and experiences from October 2008 through June 2009. These results are an addition to those provided in the previous four evaluation reports.

  11. SunLine Transit Agency Fuel Cell Transit Bus: Fourth Evaluation Report (Report and Appendices)

    Energy Technology Data Exchange (ETDEWEB)

    Chandler, K.; Eudy, L.

    2009-01-01

    This report describes operations at SunLine Transit Agency for a prototype fuel cell bus and five new compressed natural gas (CNG) buses. This is the fourth evaluation report for this site, and it describes results and experiences from April 2008 through October 2008. These results are an addition to those provided in the previous three evaluation reports.

  12. Impact of a walking school bus program on children's active commuting to school and physical activity

    Science.gov (United States)

    Walking School Buses (WSB) are groups of students, led to and from school by adults, in which students are picked up at designated "bus stops". The impact of WSB programs on students' active commuting to school (walking/cycling to school, ACS), and moderate-to vigorous-physical activity (MVPA) has n...

  13. General purpose interface bus for personal computers used in wind tunnel data acquisition

    Science.gov (United States)

    Puram, Chith K.

    1993-01-01

    The use of the general purpose interface bus IEEE-488 to met the special requirements of wind tunnel testing involving PCs is discussed. The gearing of instrumentation to minimize test time, the choice of software to meet computer memory constraints, the use of graphics for improved use of tunnel run time, and the choice of data acquisition equipment to remove bottlenecks are addressed.

  14. Delay-Insensitive Synchronization on a Message-Passing Architecture with an Open Collector Bus

    NARCIS (Netherlands)

    Bekker, H.; Dijkstra, E.J.

    1996-01-01

    The performance of some algorithms, running on a message passing computer; is limited by the high latency of global communications. To increase the performance, a simple open collector bus, operated by delay insensitive programs running on each processor can be used. We illustrate this by an example

  15. Traffic signal design and simulation for vulnerable road users safety and bus preemption

    Science.gov (United States)

    Lo, Shih-Ching; Huang, Hsieh-Chu

    2015-01-01

    Mostly, pedestrian car accidents occurred at a signalized interaction is because pedestrians cannot across the intersection safely within the green light. From the viewpoint of pedestrian, there might have two reasons. The first one is pedestrians cannot speed up to across the intersection, such as the elders. The other reason is pedestrians do not sense that the signal phase is going to change and their right-of-way is going to be lost. Developing signal logic to protect pedestrian, who is crossing an intersection is the first purpose of this study. In addition, to improve the reliability and reduce delay of public transportation service is the second purpose. Therefore, bus preemption is also considered in the designed signal logic. In this study, the traffic data of the intersection of Chong-Qing North Road and Min-Zu West Road, Taipei, Taiwan, is employed to calibrate and validate the signal logic by simulation. VISSIM 5.20, which is a microscopic traffic simulation software, is employed to simulate the signal logic. From the simulated results, the signal logic presented in this study can protect pedestrians crossing the intersection successfully. The design of bus preemption can reduce the average delay. However, the pedestrian safety and bus preemption signal will influence the average delay of cars largely. Thus, whether applying the pedestrian safety and bus preemption signal logic to an intersection or not should be evaluated carefully.

  16. Implementation of Transaction Level AMBA Bus Models Using SystemC

    Institute of Scientific and Technical Information of China (English)

    He Zhen; Cao Yang; Zhang Jun-xin; Ma Qin-sheng

    2004-01-01

    This paper deals with how to implement AMBA bus transaction level modeling in SystemC. There are two main techniques used in the whole modeling process, which consist of starting the platform modeling at the transaction level and using the uniformed modeling language--System C. According to the concepts of interface, port and hierarchical channel introduced in SystemC 2.0, the system of master-channel (AMBA bus) slave is created as the architecture of the AMBA bus transaction level model, which can make it more extendable. The port and interface classes of the model that are prone to program are defined in accordance with the SoC hierarchical design methodology. In addition, method calls, not signal communication, are used between different modules in the model, so the higher-level abstraction is achieved and the simulation performance is improved. The AMBA bus transaction level model is analyzed and certified by simulation experiment, and proved to be completely compliant to the AMBA specification 2.0.

  17. Vulnerability of bus and truck drivers affected from vehicle engine noise

    Directory of Open Access Journals (Sweden)

    Naba Kumar Mondal

    2014-12-01

    Full Text Available The purpose of this study was to find out the vulnerability of bus and truck drivers due to constant exposure of vehicle-engine noise inside the vehicle cabin. Comparative results revealed that noise levels inside the cabin of buses and trucks were in the range of 88.6–102.4 dB and 87.95–103.4 dB, respectively. The health status of bus and truck drivers was assessed by measuring their systolic and diastolic pressure, pulse rate, BMI, digestion problem, hearing loss, vision problem, back pain and irritation. Paired t-test of the results revealed non-significant (p < 0.05 relation between systolic and diastolic pressure of both bus and truck drivers. The pulse rate of truck driver was significantly (p < 0.01 related with noise level inside the cabin of truck. The humidity level inside the cabin showed a positive relation with vehicle age (p < 0.01 and driving period (p < 0.01. This study clearly suggests that vehicle engine noise adversely affects the cardiovascular health of both bus and truck drivers.

  18. Minute ventilation of cyclists, car and bus passengers: an experimental study.

    NARCIS (Netherlands)

    Zuurbier, M.; Hoek, G.; van den Hazel, P.J.; Brunekreef, B.

    2009-01-01

    ABSTRACT: BACKGROUND: Differences in minute ventilation between cyclists, pedestrians and other commuters influence inhaled doses of air pollution. This study estimates minute ventilation of cyclists, car and bus passengers, as part of a study on health effects of commuters' exposure to air pollutan

  19. 公交车专用变速箱设计%Dedicated Bus Gearbox Design

    Institute of Scientific and Technical Information of China (English)

    冀勇彪

    2013-01-01

    Introduces the bus gearbox market demand and development prospect of domestic bus transmission, analyzes research status, in the bus transmission noise, sealing, manipulation of the special characteristics, analysis of bus control mechanism of gearbox, transmission mechanism failure mode, combinative company is real, in the structural design measures, complete a five-speed gearbox design of buses.%  介绍了公交车变速箱的市场需求及发展前景,分析了国内公交车变速箱的研究状况,针对公交车变速箱对噪音、密封性、操纵性的特殊特性,结合公司实际,对变过相关体结构,助力器及其与缓速器的接口进行了设计,完成五档公交车变速箱的设计。

  20. Made of modules - the Setra versatile bus; Aus Modulen kombiniert - die Baureihe Setra-Kombibus

    Energy Technology Data Exchange (ETDEWEB)

    Hamsten, B.; Stangl, G. [EvoBus GmbH, Stuttgart (Germany)

    1997-07-01

    Setra is in the process of replacing its most successful bus 200 UL which, with its many versions, was for more than ten years leader in the market saegment of intercity public service buses. The development of the new bus family, the `Kombibus` Kombi means versatile, was started from scratch. The entirely new bus is made from modules, and the consistency with which this idea was carried through is the real innovation. Not only are driveline and running gear standardised modules - this has been common practice with buses for a long time - but also the body in white, the components and fittings of the body, the equipment, and the many extras. With only four different cross sections through the passenger compartment a wide spectrum of buses is covered, ranging from a plain low-floor bus to the luxurious travel coach. The `Kombibus` permits the operator of a bus fleet to combine modules to make exactly the bus he requires without the need for a new type. At the same time, the manufacturer has gained the advantage of being able to serve a larger market segment with fewer parts and components, at lower cost and with a shorter delivery time. (orig.) [Deutsch] Setra ist dabei, die erfolgreiche Baureihe 200, die seit mehr als zehn Jahren Markftuehrer in dem Segment Ueberlandlinienbus ist, durch die von Grund auf neu entwickelte Familie `Kombibus` abzuloesen. Innovativ am `Kombibus` ist die Konsequenz, mit der das Modulkonzept auf alle Komponenten angewendet wurde. Nicht nur Triebstrang und Fahrwerk wurden danach festgelegt, sondern auch die Karosserie, ihr Rohbau ebenso wie ihre Ausruestung und das gesamte Zubehoer. Mit nur vier verschiedenen Querschnittsformen durch den Fahrgastraum wird ein Spektrum abgedeckt, welches vom nuechternen Niederflur- bis hin zum komfortablen Reisebus reicht. Den Betreibern von Omnibussen bietet der `Kombibus` die Moeglichkeit, sich den genau auf ihre Anforderungen zugeschnittenen Bus zusammenzustellen. Fuer den Hersteller ergibt sich der

  1. Quantum Annealing for Variational Bayes Inference

    OpenAIRE

    Sato, Issei; Kurihara, Kenichi; Tanaka, Shu; Nakagawa, Hiroshi; Miyashita, Seiji

    2014-01-01

    This paper presents studies on a deterministic annealing algorithm based on quantum annealing for variational Bayes (QAVB) inference, which can be seen as an extension of the simulated annealing for variational Bayes (SAVB) inference. QAVB is as easy as SAVB to implement. Experiments revealed QAVB finds a better local optimum than SAVB in terms of the variational free energy in latent Dirichlet allocation (LDA).

  2. Safety culture development at Daya Bay NPP

    International Nuclear Information System (INIS)

    From view on Organization Behavior theory, the concept, development and affecting factors of safety culture are introduced. The focuses are on the establishment, development and management practice for safety culture at Daya Bay NPP. A strong safety culture, also demonstrated, has contributed greatly to improving performance at Daya Bay

  3. Anthropization in Montevideo Bay during the Holocene

    International Nuclear Information System (INIS)

    This work is about the anthropogenic historic impacts in subtidal environments in Montevideo Bay. The studies carried out in the sediments enable to conclude that the increase of the industrial discharges (nutrients, heavy metals) are the cause of the chemical changes in the sediment of the Montevideo Bay

  4. Bayesian Posteriors Without Bayes' Theorem

    CERN Document Server

    Hill, Theodore P

    2012-01-01

    The classical Bayesian posterior arises naturally as the unique solution of several different optimization problems, without the necessity of interpreting data as conditional probabilities and then using Bayes' Theorem. For example, the classical Bayesian posterior is the unique posterior that minimizes the loss of Shannon information in combining the prior and the likelihood distributions. These results, direct corollaries of recent results about conflations of probability distributions, reinforce the use of Bayesian posteriors, and may help partially reconcile some of the differences between classical and Bayesian statistics.

  5. 3.2Gbps multi-channel optical backplane bus demonstrator using photopolymer volume gratings

    Science.gov (United States)

    Bi, Hai; Choi, Jinho; Jiang, Wei; Han, Xuliang; Ellis, Jonathan; Chen, Ray T.

    2007-02-01

    A 3-slot optical backplane bus demonstrator based on glass substrate with photopolymer volume gratings array (PVGA) on top surface is built to allow 16 channels of data to be broadcast from central slot to two daughter slots or uploaded from any daughter slot to central slot. VCSELs and photodetectors packaged in the form of TO-46 can are assembled on top of each PVG and interleaved to reduce the crosstalk to below noise level. By carefully aligning the fabrication system, the incident angle deviation from Bragg condition is reduced to below 0.1° to maximize optical power delivery. The orientation and period of hologram fringes are uniform in the active area by collimating recording beams. Above 4.8Gbps aggregated data transmission is successfully demonstrated using the multi-channel system. Three computer mother boards using FPGA are made to verify the data transmission among the slots. Interface boards between the FPGA boards and optical transceivers are designed and fabricated to separate the implementation of digital layer and optical layer. Single channel transmissions with 3.2Gbps and even 10Gbps data rate are also tested with above 100uW input power, showing the potential to improve the total two-way bandwidth to above 102.4Gbps. Alignment tolerance of the optical interconnect system is investigated theoretically and experimentally. By analyzing the diffractive characteristics, the bandwidth limit of the optical layer is determined to be in the order of Terahertz. Design and fabrication issues are discussed for future optical backplane bus to make terahertz bandwidth into reality. Based on the experiments for Bit-interleaved Optical Backplane bus and Multi-channel optical backplane bus demonstrators, theoretical analysis of the bandwidth limit of the optical backplane bus using photopolymer volume gratings has been carried out.

  6. Radioactivity Levels in Kola Bay

    International Nuclear Information System (INIS)

    Sediment samples were collected in May 1995 from 16 locations in Kola Bay, North-west Russia, during an expedition starting from Murmansk and ending at Kildin Island in the Barents Sea. The purpose was to study the contamination level in an area with several potential sources of civilian and military radioactive pollution. 137Cs concentrations in the sediments, algae and benthic samples were low, but small particles containing 137Cs were separated from the sediment samples. All the sediments between the nuclear icebreaker base Atomflot and the open Barents Sea contained 60Co. Traces of 125Sb, 134Cs, 95Zr, 154Eu and 152Eu were also detected in some of the samples. Plutonium levels were low, but the increased 238Pu/239,240Pu ratio at Atomflot indicated a fresh release from the facility or from the waste storage vessels, Lepse and Imandra, lying in front of it. An increased 238Pu/239,240Pu ratio was also found in sediment collected in the outlet of Kola Bay in the Barents Sea. (author)

  7. Development of VME system in RPC electronics for reactor neutrino experiment at Daya Bay Nuclear Power Plant

    International Nuclear Information System (INIS)

    VME system of the Resistive Plate Chamber (RPC) electronics for the Daya Bay Reactor Neutrino Experiment is described in this paper. A 9U VME RPC trigger module (RTM) is designed to process coincidence signals coming from front end cards (FECs), to generate local triggers and send them to FECs to select the hit data from RPC detector, to report trigger information to a master trigger system and receive cross triggers from the master trigger system. Another 9U VME readout module is designed to collect data from all FECs, to send out configurations to FECs, and to transmit collected hit data to the data acquisition system via VME bus. Test results prove that the VME system is capable of treating a maximum data rate (2.2 MB·s-1), without data loss. (authors)

  8. Urinary 1-hydroxypyrene and mutagenicity in bus drivers and mail carriers exposed to urban air pollution in Denmark

    DEFF Research Database (Denmark)

    Hansen, A.M.; Wallin, H.; Binderup, Mona-Lise;

    2004-01-01

    Background: Previous studies in Denmark have shown that bus drivers and tramway employees were at an increased risk for developing several types of cancer and that bus drives from central Copenhagen have high levels of biomarkers of DNA damage. Aims: The present study evaluates 1-hydroxypyrene...... NAT2 phenotype, cooking at home, exposure to vehicle exhaust, and performing physical exercise after work were included. The NAT2 slow acetylators had 29% (1.29 [CI: 1.15-1.98]) higher 1-hydroxypyrene concentrations in urine than the fast acetylators. Male bus drivers had 0.92 revertants...

  9. Urinary 1-hydroxypyrene and mutagenicity in bus drivers and mail carriers exposed to urban air pollution in Denmark

    DEFF Research Database (Denmark)

    Hansen, Åse Marie; Wallin, Håkan; Binderup, Mona Lise;

    2004-01-01

    BACKGROUND: Previous studies in Denmark have shown that bus drivers and tramway employees were at an increased risk for developing several types of cancer and that bus drives from central Copenhagen have high levels of biomarkers of DNA damage.AIMS: The present study evaluates 1-hydroxypyrene...... NAT2 phenotype, cooking at home, exposure to vehicle exhaust, and performing physical exercise after work were included. The NAT2 slow acetylators had 29% (1.29 [CI: 1.15-1.98]) higher 1-hydroxypyrene concentrations in urine than the fast acetylators. Male bus drivers had 0.92 revertants...

  10. CAN and FPGA communication engineering implementation of a CAN bus based measurement system on an FPGA development kit

    CERN Document Server

    Zhu, Yu

    2010-01-01

    Hauptbeschreibung The Controller Area Network (CAN), invented by Bosch in 1983, is a serial field bus protocol which was originally used in road vehicles and now is widely applied in other industrial fields. Since its birth automotive electronic engineers have been use Microcontrollers (MCU) to control the CAN bus. Today, as the Field-programmable Gate Array (FPGA) has become very advance, this book introduces a new method which uses an FPGA and a MCU jointly instead of a single MCU is to design a CAN bus measurement system. Furthermore the designed system should be able to work at the fastest

  11. Bus Yards and Repair Facilities, Local Buildings - Bus shop is included in local buildings layer, Published in 2008, 1:2400 (1in=200ft) scale, Effingham County Board Of Commissioners.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Bus Yards and Repair Facilities dataset, published at 1:2400 (1in=200ft) scale, was produced all or in part from Orthoimagery information as of 2008. It is...

  12. Injury Severity Score based estimation of height of fall in bus rolling down the cliff.

    Science.gov (United States)

    Radojevic, Nemanja; Curovic, Ivana; Atanasijevic, Tatjana; Lazovic, Ranko

    2015-08-01

    A case of bus rollover into the canyon, 40 m down the road, with 47 occupants out of which 18 were fatally injured, was used to compute the Injury Severity Score (ISS) for each passengers as well as the equivalent free fall for this particular accident, to be compared to the height of fall as estimated by the Lau's model based on ISS, resulting the conclusion whether Lau's model and the computation of ISS can be considered reliable to estimate the height of fall in any other case. Dealing with this, we would be also able to assess a protective potential of the bus on occupants while it falls from the height. By using classic energy-related mechanical formulas the presented rollover down the cliff has been transferred into a corresponding free fall from the height (10 m). ISS for each passenger has been used to establish height bands of the corresponding free fall. The analysis of the presented case showed that only 30% of bus passengers sustained injuries similar to the injuries expected in the fall from height in the range of 10-20 m. The chances to be non-severely injured as a consequence of the fall in a bus is 43%, but still remains a very high chance (27%) to sustain injures more severe than expected for the equivalent free fall from height out of a vehicle. Moreover, eight passengers sustained pulmonary detraction which is characteristic of the fall above 40 m. The conclusion is that this mathematical computing for transferring one way of motion into another one may be useful for any other event similar to the fall from height and further usage of Lau's modules. Also, estimated severity of the injuries expressed through ISS can be merely an approximating indicator of the height of the fall of the bus, so ISS is not able to estimate the exact height. Finally, in majority of cases the protective potential of the bus may preserve from severe body damage, but the mortality rate still stands on a very high level.

  13. 46 CFR 7.20 - Nantucket Sound, Vineyard Sound, Buzzards Bay, Narragansett Bay, MA, Block Island Sound and...

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Nantucket Sound, Vineyard Sound, Buzzards Bay, Narragansett Bay, MA, Block Island Sound and easterly entrance to Long Island Sound, NY. 7.20 Section 7.20... Atlantic Coast § 7.20 Nantucket Sound, Vineyard Sound, Buzzards Bay, Narragansett Bay, MA, Block...

  14. Persistent whole-bay red tide of Noctiluca scintillans in Manila Bay, Philippines

    OpenAIRE

    Furuya, Ken; Saito, Haruna; Rujinard, Sriwoon; Anil K. Vijayan; Omura, Takuo; Elsa E. Furio; Valeriano M. Borja; Sopana, Boonyapiwat; Thaithaworn, Lirdwitayaprasit

    2006-01-01

    Noctiluca scintillans, which contains a photosynthetic endosymbiont, Pedinomonas noctilucae, formed perennial red tides in Manila Bay, Philippines, occasionally covering almost whole area since 2001. A whole-bay scale red tide of the green Noctiluca in Manila Bay is described as the first step to elucidate the formation mechanism of the large scale blooming of the organism. A field survey was conducted in March 2004, when greenish discoloration due to N. scintillans was observed in the whole ...

  15. Holy grail at Baglan Bay

    Energy Technology Data Exchange (ETDEWEB)

    Watson, Jim

    1999-09-01

    The UK government's consent for the construction of a gas-fired power plant at Baglan Bay in South Wales is reported, and the growing popularity of economic combined-cycle gas turbine (CCGT) power plants and the resulting environmental improvements are noted . The combining of gas and steam turbines, design developments, and the UK moratorium on planning consents for gas fired power plants are discussed. General Electric's H System technology which will lower the amount of energy lost in the conversion of natural gas to electricity is described, and details of the ten most problematic CCGTs in the UK are given. The domination of the CCGT global market by four manufacturers, and the pressure on manufacturers to develop their designs are considered. (UK)

  16. Bayes linear covariance matrix adjustment

    CERN Document Server

    Wilkinson, Darren J

    1995-01-01

    In this thesis, a Bayes linear methodology for the adjustment of covariance matrices is presented and discussed. A geometric framework for quantifying uncertainties about covariance matrices is set up, and an inner-product for spaces of random matrices is motivated and constructed. The inner-product on this space captures aspects of our beliefs about the relationship between covariance matrices of interest to us, providing a structure rich enough for us to adjust beliefs about unknown matrices in the light of data such as sample covariance matrices, exploiting second-order exchangeability and related specifications to obtain representations allowing analysis. Adjustment is associated with orthogonal projection, and illustrated with examples of adjustments for some common problems. The problem of adjusting the covariance matrices underlying exchangeable random vectors is tackled and discussed. Learning about the covariance matrices associated with multivariate time series dynamic linear models is shown to be a...

  17. The Liverpool Bay Coastal Observatory

    Science.gov (United States)

    Howarth, John; Palmer, Matthew

    2011-11-01

    A pilot Coastal Observatory has been established in Liverpool Bay which integrates (near) real-time measurements with coupled models and whose results are displayed on the web. The aim is to understand the functioning of coastal seas, their response to natural forcing and the consequences of human activity. The eastern Irish Sea is an apt test site, since it encompasses a comprehensive range of processes found in tidally dominated coastal seas, including near-shore physical and biogeochemical processes influenced by estuarine inflows, where both vertical and horizontal gradients are important. Applications include hypernutrification, since the region receives significantly elevated levels of nutrient inputs, shoreline management (coastal flooding and beach erosion/accretion), and understanding present conditions to predict the impact of climate change (for instance if the number and severity of storms, or of high or low river flows, change). The integrated measurement suite which started in August 2002 covers a range of space and time scales. It includes in situ time series, four to six weekly regional water column surveys, an instrumented ferry, a shore-based HF radar system measuring surface currents and waves, coastal tide gauges and visible and infra-red satellite data. The time series enable definition of the seasonal cycle, its inter-annual variability and provide a baseline from which the relative importance of events can be quantified. A suite of nested 3D hydrodynamic, wave and ecosystem models is run daily, focusing on the observatory area by covering the ocean/shelf of northwest Europe (at 12-km resolution) and the Irish Sea (at 1.8 km), and Liverpool Bay at the highest resolution of 200 m. The measurements test the models against events as they happen in a truly 3D context. All measurements and model outputs are displayed freely on the Coastal Observatory website (http://cobs.pol.ac.uk) for an audience of researchers, education, coastal managers and the

  18. Preliminary Flight Results of the Microelectronics and Photonics Test Bed: NASA DR1773 Fiber Optic Data Bus Experiment

    Science.gov (United States)

    Jackson, George L.; LaBel, Kenneth A.; Marshall, Cheryl; Barth, Janet; Seidleck, Christina; Marshall, Paul

    1998-01-01

    NASA Goddard Spare Flight Center's (GSFC) Dual Rate 1773 (DR1773) Experiment on the Microelectronic and Photonic Test Bed (MPTB) has provided valuable information on the performance of the AS 1773 fiber optic data bus in the space radiation environment. Correlation of preliminary experiment data to ground based radiation test results show the AS 1773 bus is employable in future spacecraft applications requiring radiation tolerant communication links.

  19. National Fuel Cell Bus Program: Accelerated Testing Evaluation Report and Appendices, Alameda-Contra Costa Transit District (AC Transit)

    Energy Technology Data Exchange (ETDEWEB)

    Chandler, K.; Eudy, L.

    2009-01-01

    This is an evaluation of hydrogen fuel cell transit buses operating at AC Transit in revenue service since March 20, 2006 compared to similar diesel buses operating from the same depot. This evaluation report includes results from November 2007 through October 2008. Evaluation results include implementation experience, fueling station operation, fuel cell bus operations at Golden Gate Transit, and evaluation results at AC Transit (bus usage, availability, fuel economy, maintenance costs, and roadcalls).

  20. Connectivity correlations in three topological spaces of urban bus-transport networks in China

    Institute of Scientific and Technical Information of China (English)

    Chen Yong-Zhou; Fu Chun-Hua; Chang Hui; Li Nan; He Da-Ren

    2008-01-01

    In this paper,an empirical investigation is presented,which focuses on unveiling the universality of connectivity correlations in three spaces(the route space,the stop geographical space and bus-transferring space)of urban bus-transport networks(BTNs)in four major cities of China.The underlying features of the connectivity correlations are shown in two statistical ways.One is the correlation between the(weighted)average degree of all the nearest neighbouring vertices with degree k,(Kw nn(k))Knn(k),and k,and the other is the correlations between the aesortativity coefficient r and,respectively,the network size N,the network diameter D,the averaged clustering coefficient C,and the averaged distance .The obtained results show qualitatively the same connectivity correlations of all the considered cities under all the three spaces.

  1. A CAN bus based control system for a joint modular robot

    Science.gov (United States)

    Han, Qingkai; Wang, Li; Ren, Yunpeng; Zhang, Tianxia; Wen, Bangchun

    2007-12-01

    This paper is mainly about a new robot control system, which has open structures, and whose architecture is based on CAN bus for a joint modular robot. The hardware system of the joint control module is designed for signal sampling and processing, data storage and communication. ATmega64 SCM is selected as the core processor. A CAN card is used for communication. FM256 RAM is used for data storage and condensation. The monitoring software and lower level control processing software are developed with ZLGVCI interface functions of CAN bus, and in the ICC AVR IDE and AVR Studio online debug tool with C language. Some experiments are carried out to validate the basic functions of the control system.

  2. PERFORMANCE ASSESSMENT OF PRODUCT DEVELOPMENT PROCESS IN A BUS COMPANY: A CASE STUDY

    Directory of Open Access Journals (Sweden)

    Tiago Ribeiro de Araújo

    2014-12-01

    Full Text Available This article aims to examine the application of a method for assessing the performance of the product development process (PDP through the assessment of managerial skills in a bus body industry. A case study was carried out and a PDP method was applied through a questionnaire addressing the PDP management skills according to Dechamps and Nayak (1997 model and validated by Silva (2001 in a bus body company which showed all the features available in the literature on industrial segment. The proposed method provided a way to assess strengths and opportunities for improvement in the company´s PDP allowing the company to focus on its efforts in actions to solve deficiencies on critical points and having continuous improvement for consolidation of the identified strengths.

  3. A Model for Bus Crew Scheduling Problem with Multiple Duty Types

    Directory of Open Access Journals (Sweden)

    Mingming Chen

    2012-01-01

    Full Text Available This paper presents an approach for solving the bus crew scheduling problem which considers early, day, and late duty modes with time shift and work intensity constraints. Furthermore, the constraint with the least crew number of a certain duty (e.g., day duty has also been considered. An optimization model is formulated as a 0-1 integer programming problem to improve the efficiency of crew scheduling at the minimum expense of total idle time of crew for a circle bus line. Correspondingly, a heuristic algorithm utilizing the tabu search algorithm has been proposed to solve the model. Finally, the proposed model and algorithm are successfully tested by a case study.

  4. Advanced interface heat exchangers for the Space Station main thermal bus

    Science.gov (United States)

    Valenzuela, Javier A.

    1990-01-01

    Future evolution and growth of the Space Station will place increasing demands on the thermal management system by the addition of new payloads and from increased activity in the habitat modules. To meet this need, Creare is developing advanced evaporators, condensors, and single-phase heat exchangers for operation in microgravity. The objective is to achieve a several-fold increase in the heat flux capability of these components, while operating at the same temperature difference as specified for the present interface heat exchangers. Two prototype interface heat exchangers are presently being developed: one to interface the main thermal bus to a payload two-phase ammonia bus, and the other, to interface with the crew module single-phase water loop. The results achieved to date in the development of these heat exchangers are reviewed.

  5. Modular, thermal bus-to-radiator integral heat exchanger design for Space Station Freedom

    Science.gov (United States)

    Chambliss, Joe; Ewert, Michael

    1990-01-01

    The baseline concept is introduced for the 'integral heat exchanger' (IHX) which is the interface of the two-phase thermal bus with the heat-rejecting radiator panels. A direct bus-to-radiator heat-pipe integral connection replaces the present interface hardware to reduce the weight and complexity of the heat-exchange mechanism. The IHX is presented in detail and compared to the baseline system assuming certain values for heat rejection, mass per unit width, condenser capacity, contact conductance, and assembly mass. The spreadsheet comparison can be used to examine a variety of parameters such as radiator length and configuration. The IHX is shown to permit the reduction of panel size and system mass in response to better conductance and packaging efficiency. The IHX is found to be a suitable heat-rejection system for the Space Station Freedom because it uses present technology and eliminates the interface mechanisms.

  6. Transient Stability Improvement of IEEE 9 Bus System Using Power World Simulator

    Directory of Open Access Journals (Sweden)

    Kaur Ramandeep

    2016-01-01

    Full Text Available The improvement of transient stability of power system was one of the most challenging research areas in power engineer.The main aim of this paper was transient stability analysis and improvement of IEEE 9 bus system. These studies were computed using POWER WORLD SIMULATOR. The IEEE 9 bus system was modelled in power world simulator and load flow studies were performed to determine pre-fault conditions in the system using Newton-Raphson method. The transient stability analysis was carried out using Runga method during three-phase balanced fault. For the improvement transient stability, the general methods adopted were fast acting exciters, FACT devices and addition of parallel transmission line. These techniques play an important role in improving the transient stability, increasing transmission capacity and damping low frequency oscillations.

  7. Torque Distribution Strategy for Integrated Starter/ Generator Hybrid Bus Implemented by Fuzzy Algorithm

    Institute of Scientific and Technical Information of China (English)

    ZHONG Hu; AO Guo-qiang; WANG Feng; MA Zi-lin; MAO Xiao-jian; ZHUO Bin

    2008-01-01

    A torque distribution strategy was designed by using fuzzy logic to realize the optimal control. Thevehicle load zones were dynamically divided into several zones by several torque lines to indicate the driversdemand and the high or low efficient operating areas of the diesel engine. The fuzzy logic controller withtrapezoid membership function and Mamdani rule reference mechanism was utilized. There are over 100 rulesused in this fuzzy-based torque distribution strategy which are sorted into four rule-bases. The fuel economyand acceleration tests were designed to test and validate the integrated starter/generator (ISG) bus perfor-mance using fuzzy-based torque distribution strategy. The fuel economy is improved 7.7% compared with therule-based strategy. Finally the road test results reveal that there is about 157% improvement of fuel economy.And the 0-50 km/h acceleration time is 9.5% shorter than the original bus.

  8. Economical launching and accelerating control strategy for a single-shaft parallel hybrid electric bus

    Science.gov (United States)

    Yang, Chao; Song, Jian; Li, Liang; Li, Shengbo; Cao, Dongpu

    2016-08-01

    This paper presents an economical launching and accelerating mode, including four ordered phases: pure electrical driving, clutch engagement and engine start-up, engine active charging, and engine driving, which can be fit for the alternating conditions and improve the fuel economy of hybrid electric bus (HEB) during typical city-bus driving scenarios. By utilizing the fast response feature of electric motor (EM), an adaptive controller for EM is designed to realize the power demand during the pure electrical driving mode, the engine starting mode and the engine active charging mode. Concurrently, the smoothness issue induced by the sequential mode transitions is solved with a coordinated control logic for engine, EM and clutch. Simulation and experimental results show that the proposed launching and accelerating mode and its control methods are effective in improving the fuel economy and ensure the drivability during the fast transition between the operation modes of HEB.

  9. Characteristics of LIN Bus Maintenance Technology%LIN总线维修技术特性

    Institute of Scientific and Technical Information of China (English)

    李倩

    2014-01-01

    Local interconnect network (LIN) is a kind of serial data communication network telecommunication line. The application of LIN greatly reduces the use number of vehicle electrical circuit, and decreases the electrical circuit fault rate. This paper mainly introduces the LIN bus and LIN bus diagnostic characteristics from the aspects of transmission mode, signal characteristics and so on.%局域互联网络(LIN)是一类串行数据通信的网络通信线,LIN的应用大大减少了车辆电气线路的使用数量,降低了电气线路的故障发生率。本文主要从传输方式、信号特性方面介绍LIN总线特性及LIN总线诊断特性。

  10. Bandwidth Enhancement between Graphics Processing Units on the Peripheral Component Interconnect Bus

    Directory of Open Access Journals (Sweden)

    ANTON Alin

    2015-10-01

    Full Text Available General purpose computing on graphics processing units is a new trend in high performance computing. Present day applications require office and personal supercomputers which are mostly based on many core hardware accelerators communicating with the host system through the Peripheral Component Interconnect (PCI bus. Parallel data compression is a difficult topic but compression has been used successfully to improve the communication between parallel message passing interface (MPI processes on high performance computing clusters. In this paper we show that special pur pose compression algorithms designed for scientific floating point data can be used to enhance the bandwidth between 2 graphics processing unit (GPU devices on the PCI Express (PCIe 3.0 x16 bus in a homebuilt personal supercomputer (PSC.

  11. An interface of ethernet and radiation monitoring network based on CAN bus

    International Nuclear Information System (INIS)

    It introduces an interface between radiation monitoring network based on CAN bus and Ethernet. The system used GM pipe to detect γ ray, employed LPC2294 as the core processor. As the main control chip, Ethernet controller DM9000 constructs hardware circuit between Ethernet and multi-CAN gateway. It transmitted the data detected by CAN but to the main control center through Ethernet for the total display of data and diagrams. (authors)

  12. Interface For Dual-Channel MIL-STD-1553 Data Bus

    Science.gov (United States)

    Davies, Bryan L.; Heaps, Timothy L.

    1992-01-01

    Digital electronic subsystem made of commercially available programmable logic arrays and discrete logic devices serves as interface between microprocessor and dual-channel MIL-STD-1553 data bus. Subsystem consumes only 800 mW of power. Provides flexibility in that it is controllable via firmware. Includes only two reading-and-writing ports: one for status and control signals, other for transmission and reception of data.

  13. Learning through policy tourism: circulating bus rapid transit from South America to South Africa

    OpenAIRE

    Astrid Wood

    2014-01-01

    Study tours, a form of ‘policy tourism’ in which local actors travel elsewhere to see best practice and meet with those in the exporting locality who implemented it, have become a basic tenet for policy exchange. In the pursuit of these lessons, hundreds of South African public transport enthusiasts visited South America, particularly Bogota, to learn of its thriving bus rapid transit (BRT) network. This paper evaluates the influence of these exchanges on BRT circulation and adoption—what tak...

  14. Estimating welfare changes from efficient pricing in public bus transit in India

    OpenAIRE

    Deb, Kaushik; Filippini, Massimo

    2011-01-01

    Three different and feasible pricing strategies for public bus transport in India are developed in a partial equilibrium framework with the objective of improving economic efficiency and ensuring revenue adequacy, namely average cost pricing, marginal cost pricing, and two-part tariffs. These are assessed not only in terms of gains in economic efficiency, but also in changes in travel demand and consumer surplus. The estimated partial equilibrium price is higher in all three pricing reg...

  15. Particles exposure while sitting at bus stops of hot and humid Singapore

    Science.gov (United States)

    Velasco, Erik; Tan, Sok Huang

    2016-10-01

    Transport microenvironments represent hotspots of personal exposure to airborne toxics, particularly of ultrafine particles. Thus, a large exposure may be experienced during daily commuting trips. Amongst these microenvironments, bus stops are critical because of the commuters' close proximity to fresh fumes rich in particles emitted by passing, idling and accelerating buses and motor vehicles, in general. Standing at a bus stop may represent a period of disproportionately high exposure and it is, therefore, essential to know the number, chemical composition and physical characteristics of such particles for a proper public health assessment and design of mobility strategies. On this account, a set of portable and battery operated sensors were used to evaluate a number of properties of the traffic particles to which thousands of citizens are daily exposed at bus stops of Singapore. In terms of fine particles, the exposure concentration was on average 1.5-3 times higher than the mean concentration at ambient level reported by the local authorities. On average 60% of those particles corresponded to black carbon. An important presence of particle-bound polycyclic aromatics was observed. The particle number concentration and active surface area were effective metrics to quantify ultrafine particles, as expected both showed strong correlations. The number of particles at bus stops was on average 3.5 times higher than at ambient level. The most alarming issue was probably the size of the particles. Assuming spherical particles, a median of 27 nm was estimated based on the active surface area and particle number data. Particles of this size form the nucleation mode, which is related to harmful health effects.

  16. “Prezewody” program for capacitance and inductance determination of can-bus transmission lines

    OpenAIRE

    Kalita, W.; Kamuda, K.; Sabat, W,; Wisz, B.

    2004-01-01

    The describing of the computer program which allows to determine residual parameters of the cable system with cylindrical section has been included in the paper. The wire capacitance and inductance, whice are used in data transmission systems (i.e. CAN-bus). have a big influence on parameters of the transmission line. The knowing of these parameters allows to select the optimal conditions of the such systems from the point view of transmission quality and electromagnetic compatibility.

  17. REACTIVE POWER LOSS OPTIMIZATION FOR AN IEEE 14-BUS POWER SYSTEM USING VARIOUS ALGORITHMS

    OpenAIRE

    NACHIMUTHU, Deepa Subramanıam; BASHA, Rızwana John

    2014-01-01

    Abstract: Optimization techniques play vital role in many problems. Many optimization algorithms have been proposed in past decades. In this paper various optimization techniques like Particle Swarm Optimization, Modified Particle Swarm Optimization, Artificial Bee Colony Algorithm, Fish School Search Algorithm and Gravitational Search Algorithm are compared and tested in an IEEE-14 Bus power system. By using these five optimization techniques, the power losses like active power and reactive ...

  18. Taking Physics and Now the Stars on the Road With the Magic Physics Bus

    Science.gov (United States)

    Bennum, David

    2009-05-01

    In February 2003 the ``Physics on the Road'' workshop, held at Colorado State University- Fort Collins, Colorado, brought together physics faculty who were experienced in designing and providing year --round mobile physics displays and those who were interested in initiating similar outreach programs. The impetus for the workshop was the upcoming ``World Year of Physics'', but the workshop had much broader impact for many of us who attended. The University of Nevada had a long history of demonstration shows for campus visitors from K-12 students/faculty but the cost of field trips began to limit this for many schools, especially for schools in poorer neighborhoods without large scale parental fundraising. The timing of the workshop was perfect for my developing program to utilize a donated ``electric bus'' as a traveling physics demo showcase. The program has grown to near our current limitations (70 mile range of the bus and time considerations), however we are expanding the ``scope'' of the project to include evening astronomy ``star parties'' as we enter the ``Year of Astronomy''. In addition to the bus transport of portable astronomy equipment to school sites we are adding, through donation, a 22 inch telescope in a domed observatory at a secondary campus location at the edge of Reno where large scale ``star parties'' can be conducted as outreach to K-12 and the community. The ``Physics on the Road'' bus reaches several thousand elementary and middle school students every year now and the potential for similar outreach with ``Stars on the Road'' has excited several of our faculty and physics students into increased participation in these endeavors to introduce our young people to science. It has become one of our most active ``recruitment'' plans and growing numbers of local students entering physics and other science majors is anecdotal evidence of success.

  19. Multi-Mission Suitability of the NASA Ames Modular Common Bus

    OpenAIRE

    Tietz, Sascha; Bell, James; Hine, Butler

    2009-01-01

    The obvious advantages of small spacecraft - their lower cost structure and the rapid development schedule - have enabled a large number of missions in the past. However, most of these missions have been focused on Earth observation from low Earth orbits. In 2006, the Small Spacecraft Division at the NASA Ames Research Center began the development of the Modular Common Bus, a spacecraft capable of delivering scientifically and technically useful payloads to a variety of destinations within 0....

  20. On the road to fossil-free public transport : The case of Swedish bus fleets

    OpenAIRE

    Xylia, Maria; Silveira, Semida

    2016-01-01

    Public transport is important for Sweden to acquire a fossil-fuel independent vehicle fleet by 2030. The aim of this paper is to assess the status of Swedish public bus fleets towards decarbonization, and explore factors affecting regional performance variations and fuel choices. Environmental performance indicators such as renewable fuel shares, CO2 emissions, and energy efficiency are analyzed nationally and regionally. Fuel preferences and best practices are investigated through a survey a...

  1. Pollution Characteristics and Health Risk Assessment of Airborne Heavy Metals Collected from Beijing Bus Stations

    OpenAIRE

    Xiaoxia Zheng; Wenji Zhao; Xing Yan; Tongtong Shu; Qiulin Xiong; Fantao Chen

    2015-01-01

    Airborne dust, which contains high levels of toxic metals, is recognized as one of the most harmful environment component. The purpose of this study was to evaluate heavy metals pollution in dustfall from bus stations in Beijing, and to perform a risk assessment analysis for adult passengers. The concentrations of Cd, Co, Cr, Cu, Mo, Ni, Pb, V and Zn were determined by inductively coupled plasma mass spectroscopy (ICP-MS). The spatial distribution, pollution level and potential health risk of...

  2. Foundation field bus in the Spanish nuclear sector; Foundation fieldbus en el sector nuclear espanol

    Energy Technology Data Exchange (ETDEWEB)

    Saez de Montagut Revenga, G.

    2013-07-01

    This paper deals with the modification made in power plants nuclear ASCO 1 and 2 in which scans is the level Control system of Heaters to implementing an Ovation system, as well as the standard Foundation Field bus for field communications. This digitalisation has required a detailed study of the implications on security that could have the centralization of control loops in main feedwater system.

  3. International Space Station Bus Regulation With NASA Glenn Research Center Flywheel Energy Storage System Development Unit

    Science.gov (United States)

    Kascak, Peter E.; Kenny, Barbara H.; Dever, Timothy P.; Santiago, Walter; Jansen, Ralph H.

    2001-01-01

    An experimental flywheel energy storage system is described. This system is being used to develop a flywheel based replacement for the batteries on the International Space Station (ISS). Motor control algorithms which allow the flywheel to interface with a simplified model of the ISS power bus, and function similarly to the existing ISS battery system, are described. Results of controller experimental verification on a 300 W-hr flywheel are presented.

  4. An Analysis of Transit Bus Driver Distraction Using Multinomial Logistic Regression Models

    OpenAIRE

    D'Souza, Kelwyn

    2012-01-01

    This paper explores the problem of distracted driving at a regional bus transit agency to identify the sources of distraction and provide an understanding of factors responsible for driver distraction. A risk range system was developed to classify the distracting activities into four risk zones. The high risk zone distracting activities were analyzed using multinomial logistic regression models to determine the impact of various factors on the multiple categorical levels of driver distraction...

  5. Health impacts of free bus travel for young people: evaluation of a natural experiment in London

    OpenAIRE

    Edwards, P.; Steinbach, R; Green, J.; Petticrew, M.; Goodman, A.; Jones, A; Roberts, H; Kelly, C.; Nellthorp, J.; Wilkinson, P.

    2013-01-01

    Background We used the introduction of free bus travel for young people in London in 2005 as a natural experiment with which to assess its effects on active travel, car use, road traffic injuries, assaults, and on one measure of social inclusion, total number of trips made. Methods A controlled before–after analysis was conducted. We estimated trips by mode and distances travelled in the preintroduction and postintroduction periods using data from London Travel Demand Surveys. We estimat...

  6. AN AUTOMATED TESTING NETWORK SYSTEM FOR PAPER LABORATORY BASED ON CAN BUS

    Institute of Scientific and Technical Information of China (English)

    Xianhui Yi; Dongbo Yan; Huanbin Liu; Jigeng Li

    2004-01-01

    This paper presents an automated testing network system for paper laboratory based on CAN bus. The overall architecture, hardware interface and software function are discussed in detail. It is indicated through experiment that the system can collect,analyze and store the test results from the various measuring instruments in the paper lab automatically.The simple, reliable, low-cost measuring automation system will have a prosperous application in the future paper industry.

  7. St. Louis Metro Biodiesel (B20) Transit Bus Evaluation: 12-Month Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Barnitt, R.; McCormick, R. L.; Lammert, M.

    2008-07-01

    The St. Louis Metro Bodiesel Transit Bus Evaluation project is being conducted under a Cooperative Research and Development Agreement between NREL and the National Biodiesel Board to evaluate the extended in-use performance of buses operating on B20 fuel. The objective of this research project is to compare B20 and ultra-low sulfur diesel buses in terms of fuel economy, veicles maintenance, engine performance, component wear, and lube oil performance.

  8. Transient Stability Analysis of IEEE 9 Bus System in Power World Simulator x

    OpenAIRE

    Transient Stability Analysis of IEEE 9 Bus System in Power World Simulator Ramandeep Kaur,; Er. Divesh Kumar

    2016-01-01

    It is widely accepted that transient stability is an important aspect in designing and upgrading electric power system. The objective of this paper was to investigate and understand the stability of power system In this paper, modelling and transient stability analysis of IEEE 9 bus system was performed using POWER WORLD SIMULATOR. The load flow studies were performed to determine pre-fault conditions in the system using Newton-Raphson method. With the help of three-phase balan...

  9. GoBus maksis riigihanke võitmiseks Valga maavanemale altkäemaksu? / Kadri Paas

    Index Scriptorium Estoniae

    Paas, Kadri, 1982-

    2007-01-01

    Kaitsepolitsei süüdistab bussifirma GoBus juhte Aivo Pärna, Kalle Muru ja Valter Keisi korduvalt altkäemaksu maksmises Valga maavanemale Georg Trashanovile. Oletuste kohaselt maksti pistist selleks, et bussifirma võidaks 2008. aastal Valgamaa bussiliinide hanked. Lisa: Aivo Pärn: mootorkelguga kõrtsi ja BMWga 211 km/h; Kapo juba aastaid Trashanovist huvitatud?

  10. Emergence of criticality in the transportation passenger flow: scaling and renormalization in the Seoul bus system.

    Directory of Open Access Journals (Sweden)

    Segun Goh

    Full Text Available Social systems have recently attracted much attention, with attempts to understand social behavior with the aid of statistical mechanics applied to complex systems. Collective properties of such systems emerge from couplings between components, for example, individual persons, transportation nodes such as airports or subway stations, and administrative districts. Among various collective properties, criticality is known as a characteristic property of a complex system, which helps the systems to respond flexibly to external perturbations. This work considers the criticality of the urban transportation system entailed in the massive smart card data on the Seoul transportation network. Analyzing the passenger flow on the Seoul bus system during one week, we find explicit power-law correlations in the system, that is, power-law behavior of the strength correlation function of bus stops and verify scale invariance of the strength fluctuations. Such criticality is probed by means of the scaling and renormalization analysis of the modified gravity model applied to the system. Here a group of nearby (bare bus stops are transformed into a (renormalized "block stop" and the scaling relations of the network density turn out to be closely related to the fractal dimensions of the system, revealing the underlying structure. Specifically, the resulting renormalized values of the gravity exponent and of the Hill coefficient give a good description of the Seoul bus system: The former measures the characteristic dimensionality of the network whereas the latter reflects the coupling between distinct transportation modes. It is thus demonstrated that such ideas of physics as scaling and renormalization can be applied successfully to social phenomena exemplified by the passenger flow.

  11. Historical methyl mercury in San Francisco Bay

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — San Francisco Bay, California is considered a mercury-impaired watershed. Elevated concentrations of mercury are found in water and sediment as well as fish and...

  12. FL BAY SPECTROUT-POPULATION STATUS

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Juvenile spotted seatrout and other sportfish are being monitored annually over a 6-mo period in Florida Bay to assess their abundance over time relative to...

  13. South Bay Salt Ponds : Initial stewardship plan

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The California Department of Fish and Game and the U.S. Fish and Wildlife Service will operate and maintain the South Bay Salt Ponds under this Initial Stewardship...

  14. 2004 Saginaw Bay, Lake Huron, Michigan Lidar

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This metadata document describes the collection and processing of Light Detection and Ranging (LIDAR) data over an area along the coast of Saginaw Bay, Lake Huron,...

  15. Delaware River and Upper Bay Sediment Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The area of coverage consists of 192 square miles of benthic habitat mapped from 2005 to 2007 in the Delaware River and Upper Delaware Bay. The bottom sediment map...

  16. On Bayes' theorem for improper mixtures

    CERN Document Server

    McCullagh, Peter; 10.1214/11-AOS892

    2011-01-01

    Although Bayes's theorem demands a prior that is a probability distribution on the parameter space, the calculus associated with Bayes's theorem sometimes generates sensible procedures from improper priors, Pitman's estimator being a good example. However, improper priors may also lead to Bayes procedures that are paradoxical or otherwise unsatisfactory, prompting some authors to insist that all priors be proper. This paper begins with the observation that an improper measure on Theta satisfying Kingman's countability condition is in fact a probability distribution on the power set. We show how to extend a model in such a way that the extended parameter space is the power set. Under an additional finiteness condition, which is needed for the existence of a sampling region, the conditions for Bayes's theorem are satisfied by the extension. Lack of interference ensures that the posterior distribution in the extended space is compatible with the original parameter space. Provided that the key finiteness conditio...

  17. BENTHIC MACROFAUNAL ALIENS IN WILLAPA BAY

    Science.gov (United States)

    Benthic macrofaunal samples were collected at random stations in Willapa Bay, WA, in four habitats [eelgrass (Zostera marina), Atlantic cordgrass (Spartina alterniflora), mud shrimp (Upogebia pugettensis), ghost shrimp (Neotrypaea californiensis)] in 1996 and in seven habitats (Z...

  18. Underwater Video Transects in Jobos Bay

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Shallow-water (<30m) benthic habitat maps of the nearshore marine environment of Jobos Bay, Puerto Rico were mapped and characterized using visual interpretation...

  19. Underwater Video Sites in Jobos Bay

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Shallow-water (<30m) benthic habitat maps of the nearshore marine environment of Jobos Bay, Puerto Rico were mapped and characterized using visual interpretation...

  20. Hydrogeomorphic Regions in the Chesapeake Bay Watershed.

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Generalized lithology (rock type) and physiography based on geologic formations were used to characterize hydrgeomorphic regions (HGMR) within the Chesapeake Bay...

  1. Sediments of Buzzards Bay, MA (HOUGH40)

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The modern sediments of Buzzards Bay are described principally by the use of quantitative data from mechanical analyses. The environment of the sediment and its...

  2. A Bayes but Not Classically Sufficient Statistic

    OpenAIRE

    Blackwell, D.; Ramamoorthi, R. V.

    1982-01-01

    In a Borel setting, every classically sufficient statistic is Bayes sufficient, but not vice versa. The example is a hypothesis testing problem in which Bayesians, but not classicists, can achieve zero error probabilities.

  3. Back Bay National Wildlife Refuge: Master Plan

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The Back Bay National Wildlife Refuge, located in the city of Virginia Beach, Virginia, comprises 4,608 acres of barrier beach, fresh and brackish marsh, small...

  4. Biscayne Bay Florida Bottlenose Dolphin Studies

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These data sets include a compilation of small vessel based studies of bottlenose dolphins that reside within Biscayne Bay, Florida, adjacent estuaries and...

  5. Pb distribution and translocation in Jiaozhou Bay

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The trends of distribution, translocation and seasonal change of heavy metal Pb were studied based on the surface and bottom water sampling in Jiaozhou Bay in 1979, and compared with those in 1990's. The results showed that the source of Pb in the bay was from wastewater and sewage in the east of Jiaozhou Bay from ocean vessels. Pb concentration was higher in spring and lower in summer and autumn, and remained stable through sedimentation in the bottom layer. The overall water quality was good in 1970's. Compared with the environmental monitoring data of 1995-1999, Pb pollution had become serious. Therefore, more efforts should be made to protect the bay from Pb pollution.

  6. Back Bay Wilderness study : Public hearing analysis

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document is an analysis of the public hearing that took place on May 15th, 1974 which discussed the Back Bay Wilderness. The analysis shows that there is...

  7. Back Bay Stormwater Monitoring Project Final Report

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The objective of this project was to assess the influx of nutrients and solid material into Back Bay and its tributaries during and immediately following such storm...

  8. Back Bay National Wildlife Refuge regulations

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document is a collection of regulations pertaining to the Back Bay National Wildlife Refuge. Most of the regulations concern motor vehicle use on the refuge.

  9. Back Bay Wilderness study : Proposed recommendations

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document is a list of recommendations for the proposed wilderness area on the Back Bay National Wildlife Refuge. The recommendations come as a result of the...

  10. Corpus ChristiEast Matagorda Bay 1986

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Patterns of habitat utilization were compared among transplanted and natural Spartina alterniflora marshes in the Halls Lake area of Chocolate Bay in the Galveston...

  11. How to Keep Bug Bites At Bay

    Science.gov (United States)

    ... gov/news/fullstory_160047.html How to Keep Bug Bites at Bay CDC offers advice on thwarting ... 23, 2016 SATURDAY, July 23, 2016 (HealthDay News) -- Bug bites can make you more than itchy. Ticks, ...

  12. Mercury distribution in the Jiaozhou Bay

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The Jiaozhou Bay is a semi-enclosed bay, Qingdao, China. More than 10 rivers enter the bay, of which most take wastes from industrial and household discharges. According to historical seasonal investigations in May, August, November 1979, the content,distribution, and development of heavy metal mercury are analyzed as a historical reference. Water samples were taken from the surface and bottom. The results revealed clear seasonal and regional changes in both horizontal and vertical directions, and close relation with major discharging rivers and plankton production. The seawater was polluted more seriously in spring than in any other seasons.However, it was the cleanest in winter during which least waste was input with low plankton production. According to historical data,the state of mercury pollution in seawater was worsening in the period, and has been improving in recent years. Terrestrial contamination was the main reason for mercury pollution in the bay.

  13. Habitat--Drakes Bay and Vicinity, California

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This part of DS 781 presents data for the habitat map of the seafloor of the Drakes Bay and Vicinity map area, California. The vector data file is included in...

  14. Willapa Bay, Washington Benthic Habitats 1995 Substrate

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — In June 1995, the Columbia River Estuary Study Taskforce (CREST) acquired 295 true color aerial photographs (1:12,000) of Willapa Bay, Washington, from the State of...

  15. Willapa Bay, Washington Benthic Habitats 1995 Geodatabase

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — In June 1995, the Columbia River Estuary Study Taskforce (CREST) acquired 295 true color aerial photographs (1:12,000) of Willapa Bay, Washington, from the State of...

  16. Willapa Bay, Washington Benthic Habitats 1995 Geoform

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — In June 1995, the Columbia River Estuary Study Taskforce (CREST) acquired 295 true color aerial photographs (1:12,000) of Willapa Bay, Washington, from the State of...

  17. Willapa Bay, Washington Benthic Habitats 1995 Biotic

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — In June 1995, the Columbia River Estuary Study Taskforce (CREST) acquired 295 true color aerial photographs (1:12,000) of Willapa Bay, Washington, from the State of...

  18. San Antonio Bay 1986-1989

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The effect of salinity on utilization of shallow-water nursery habitats by aquatic fauna was assessed in San Antonio Bay, Texas. Overall, 272 samples were collected...

  19. Bayes Factors via Savage-Dickey Supermodels

    CERN Document Server

    Mootoovaloo, A; Kunz, M

    2016-01-01

    We outline a new method to compute the Bayes Factor for model selection which bypasses the Bayesian Evidence. Our method combines multiple models into a single, nested, Supermodel using one or more hyperparameters. Since the models are now nested the Bayes Factors between the models can be efficiently computed using the Savage-Dickey Density Ratio (SDDR). In this way model selection becomes a problem of parameter estimation. We consider two ways of constructing the supermodel in detail: one based on combined models, and a second based on combined likelihoods. We report on these two approaches for a Gaussian linear model for which the Bayesian evidence can be calculated analytically and a toy nonlinear problem. Unlike the combined model approach, where a standard Monte Carlo Markov Chain (MCMC) struggles, the combined-likelihood approach fares much better in providing a reliable estimate of the log-Bayes Factor. This scheme potentially opens the way to computationally efficient ways to compute Bayes Factors in...

  20. Measurement of Parasitic Inductances in the Bus-Bar Assembly of a High Power Voltage Source Converter

    Science.gov (United States)

    Datta, Aniket; Narayanan, G.

    2016-05-01

    Insulated gate bipolar transistor (IGBT) based voltage source converters use copper plates with insulating sheets in between them (sandwich bus-bar arrangement) for connecting the different device terminals in the power circuit. In such converters, the parasitic inductances in the power circuit are crucial as they cause overvoltage spikes across the device. Also, the parasitics affect the current sharing between IGBTs when they are connected in parallel in high power converters. The conduction path through plates and fasteners in the bus-bar assembly is three-dimensional and quite complex, making analytical evaluation of the stray inductance quite challenging. The first objective here is to present a simple experimental setup and experimental procedure, which are convenient for power electronic engineers, to measure the bus-bar inductance. The next objective is to carry out experimental studies on the inductances offered by different components and sub-assemblies in a bus-bar assembly. This includes evaluation of inductances of the different conduction paths in typical bus-bar plates. The third objective is to experimentally evaluate the parasitic inductances in the bus-bar assembly of a commercial 250 kVA high power converter. Each leg of this converter consists of two 300 A/1200 V IGBTs connected in parallel. The effective inductance seen by the individual device modules are determined experimentally.