WorldWideScience

Sample records for burnable poison placement

  1. Burnable poison rod

    International Nuclear Information System (INIS)

    Natsume, Tomohiro.

    1988-01-01

    Purpose: To decrease the effect of water elimination and the effect of burn-up residue boron, thereby reduce the effect of burnable poison rods as the neutron poisons at the final stage of reactor core lifetime. Constitution: In a burnable poison rod according to the present invention, a hollow burnable poison material is filled in an external fuel can, an inner fuel can mounted with a carbon rod is inserted to the hollow portion of the burnable poison material and helium gases are charged in the outer fuel can. In such a burnable poison rod, the reactivity worths after the burning are reduced to one-half as compared with the conventional case. Accordingly, since the effect of the burnable poison as the neutron poisons is reduced at the final stage of the reactor core of lifetime, the excess reactivity of the reactor core is increased. (Horiuchi, T.)

  2. Burnable poison rod

    International Nuclear Information System (INIS)

    Natsume, Tomohiro.

    1988-01-01

    Purpose: To increase the reactor core lifetime by decreasing the effect of neutron absorption of burnable poison rods by using material with less neutron absorbing effect. Constitution: Stainless steels used so far as the coating material for burnable poison rods have relatively great absorption in the thermal neutral region and are not preferred in view of the neutron economy. Burnable poison rods having fuel can made of zirconium alloy shows absorption the thermal neutron region lower by one digit than that of stainless steels but they shows absorption in the resonance region and the cost is higher. In view of the above, the fuel can of the burnable poison material is made of aluminum or aluminu alloy. This can reduce the neutron absorbing effect by stainless steel fuel can and effectively utilize neutrons that have been wastefully absorbed and consumed in stainless steels. (Takahashi, M.)

  3. Heterogeneous burnable poisons:

    International Nuclear Information System (INIS)

    Leiva, Sergio; Agueda, Horacio; Russo, Diego

    1989-01-01

    The use of materials possessing high neutron absorption cross-section commonly known as 'burnable poisons' have its origin in BWR reactors with the purpose of improving the efficiency of the first fuel load. Later on, it was extended to PWR to compensate of initial reactivity without infringing the requirement of maintaining a negative moderator coefficient. The present tendency is to increase the use of solid burnable poisons to extend the fuel cycle life and discharge burnup. There are two concepts for the burnable poisons utilization: 1) heterogeneously distributions in the form of rods, plates, etc. and 2) homogeneous dispersions of burnable poisons in the fuel. The purpose of this work is to present the results of sinterability studies, performed on Al 2 O 3 -B 4 C and Al 2 O 3 -Gd 2 O 3 systems. Experiments were carried on pressing at room temperature mixtures of powders containing up to 5 wt % of B 4 C or Gd 2 O 3 in Al 2 O 3 and subsequently sintering at 1750 deg C in reducing atmosphere. Evaluation of density, porosity and microstructures were done and a comparison with previous experiences is shown. (Author) [es

  4. Usage of burnable poison on research reactors

    International Nuclear Information System (INIS)

    Villarino, Eduardo Anibal

    2002-01-01

    The fuel assemblies with burnable poison are widely used on power reactors, but there are not commonly used on research reactors. This paper shows a neutronic analysis of the advantages and disadvantages of the burnable poison usage on research reactors. This paper analyses both burnable poison design used on research reactors: Boron on the lateral wall and Cadmium wires. Both designs include a parametric study on the design parameters like the amount and geometry of the burnable poison. This paper presents the design flexibility using burnable poisons, it does not find an optimal or final design, which it will strongly depend on the core characteristics and fuel management strategy. (author)

  5. Fuel assembly and burnable poison rod

    International Nuclear Information System (INIS)

    Hirukawa, Koji.

    1993-01-01

    In a fuel assembly having burnable poison rods arranged therein, the burnable poison comprises an elongate small outer tube and an inner tube coaxially disposed within the outer tube. Upper and lower end tubes each sealed at one end are connected to both of the upper and lower ends in the inner and the outer tubes respectively. A coolant inlet hole is disposed to the lower end tube, while a coolant leakage hole is disposed to the upper end tube. Burnable poison members are filled in an annular space. Further, the burnable poison-filling region is disposed excepting portions for 1/20 - 1/12 of the effective fuel length at each of the upper and the lower ends of the fuel rod. Then, the concentration of the burnable poisons in a region above a boundary defined at a position 1/3 - 1/2, from beneath, of the effective fuel length is made smaller than that in the lower region. This enables to suppress excess reactions of fuels to reduce the mass of the burnable neutron. Excellent reactivity control performance at the initial stage of the burning can be attained. (T.M.)

  6. Burnable poison fuel element and its fabrication

    International Nuclear Information System (INIS)

    Zukeran, Atsushi; Inoue, Kotaro; Aizawa, Hiroko.

    1985-01-01

    Purpose: To enable to optionally vary the excess reactivity and fuel reactivity. Method: Burnable poisons with a large neutron absorption cross section are contained in fuel material, by which the excess reactivity at the initial stage in the reactor is suppressed by the burnable poisons and the excess reactivity is released due to the reduction in the atomic number density of the burnable poisons accompanying the burning. The burnable poison comprises spherical or rod-like body made of a single material or spherical or rod-like member made of a plurality kind of materials laminated in a layer. These spheres or rods are dispersed in the fuel material. By adequately selecting the shape, combination and the arrangement of the burnable poisons, the axial power distribution of the fuel rods are flattened. (Moriyama, K.)

  7. Cutting system for burnable poison rod

    International Nuclear Information System (INIS)

    Shiina, Atsushi; Toyama, Norihide; Koshino, Yasuo; Fujii, Toshio

    1989-01-01

    Burnable poison rods attached to spent fuels are contained in a containing box and transported to a receiving pool. The burnable poison rod-containing box is provisionally situated by the operation to a handling device to a provisional setting rack in a cutting pool and attached to a cutting guide of a cutting device upon cutting. The burnable poison rod is cut only in a cutting pool water and tritium generated upon cutting is dissolved into the cutting pool water. Diffusion of tritium is thus restricted. Further, the cutting pool is isolated by a partition device from the receiving pool during cutting of the burnable poison rod. Accordingly, water in which tritium is dissolved is inhibited from moving to the receiving pool and prevail of tritium contamination can be avoided. (T.M.)

  8. Implementation of strength pareto evolutionary algorithm II in the multiobjective burnable poison placement optimization of KWU pressurized water reactor

    International Nuclear Information System (INIS)

    Gharari, Rahman; Poursalehi, Navid; Abbasi, Mohmmadreza; Aghale, Mahdi

    2016-01-01

    In this research, for the first time, a new optimization method, i.e., strength Pareto evolutionary algorithm II (SPEA-II), is developed for the burnable poison placement (BPP) optimization of a nuclear reactor core. In the BPP problem, an optimized placement map of fuel assemblies with burnable poison is searched for a given core loading pattern according to defined objectives. In this work, SPEA-II coupled with a nodal expansion code is used for solving the BPP problem of Kraftwerk Union AG (KWU) pressurized water reactor. Our optimization goal for the BPP is to achieve a greater multiplication factor (K-e-f-f) for gaining possible longer operation cycles along with more flattening of fuel assembly relative power distribution, considering a safety constraint on the radial power peaking factor. For appraising the proposed methodology, the basic approach, i.e., SPEA, is also developed in order to compare obtained results. In general, results reveal the acceptance performance and high strength of SPEA, particularly its new version, i.e., SPEA-II, in achieving a semioptimized loading pattern for the BPP optimization of KWU pressurized water reactor

  9. Implementation of strength pareto evolutionary algorithm II in the multiobjective burnable poison placement optimization of KWU pressurized water reactor

    Energy Technology Data Exchange (ETDEWEB)

    Gharari, Rahman [Nuclear Science and Technology Research Institute (NSTRI), Tehran (Iran, Islamic Republic of); Poursalehi, Navid; Abbasi, Mohmmadreza; Aghale, Mahdi [Nuclear Engineering Dept, Shahid Beheshti University, Tehran (Iran, Islamic Republic of)

    2016-10-15

    In this research, for the first time, a new optimization method, i.e., strength Pareto evolutionary algorithm II (SPEA-II), is developed for the burnable poison placement (BPP) optimization of a nuclear reactor core. In the BPP problem, an optimized placement map of fuel assemblies with burnable poison is searched for a given core loading pattern according to defined objectives. In this work, SPEA-II coupled with a nodal expansion code is used for solving the BPP problem of Kraftwerk Union AG (KWU) pressurized water reactor. Our optimization goal for the BPP is to achieve a greater multiplication factor (K-e-f-f) for gaining possible longer operation cycles along with more flattening of fuel assembly relative power distribution, considering a safety constraint on the radial power peaking factor. For appraising the proposed methodology, the basic approach, i.e., SPEA, is also developed in order to compare obtained results. In general, results reveal the acceptance performance and high strength of SPEA, particularly its new version, i.e., SPEA-II, in achieving a semioptimized loading pattern for the BPP optimization of KWU pressurized water reactor.

  10. Burnable poison management in a HTR

    Energy Technology Data Exchange (ETDEWEB)

    Pedersen, J

    1971-09-21

    It is the purpose with this paper to describe the state-of-the-art of burnable poison investigations made within the Dragon Project and to give the results of a number of calculations, which show that it is possible to control the large initial surplus reactivity of the first core and the radial power distribution with two types of burnable poison sticks with Gadolinium (one type of stick to be used in the inner core region, the other in the outer core region), where the poison will burn away so that keff always stays around the desired value 1.03, and with the radial form-factor not exceeding 1.20. The calculations made for this paper are not too accurate, especially the chosen timestep for calculating the burn-up of the burnable poison stick proved to be too large. Nevertheless, the calculations are good enough to draw the above mentioned conclusions, although they have not given the concentration of Gadolinium to be used in the burnable poison sticks very accurately.

  11. A consolidation process for spent burnable poison rod assemblies

    International Nuclear Information System (INIS)

    Yamamoto, Y.; Harada, M.; Komatsu, Y.

    1985-01-01

    A new consolidation system for the spent burnable poison assembly utilizing a sequence control robot operated under water was proposed. A credible accident in the system was analyzed mainly from the viewpoint of tritium release, based on the diffusion analysis of tritium in borosilicate glass. It was found that the amount of tritium released would be small even after the rupture of burnable poison rods. An experiment on a new consolidation system was performed using spent burnable poison assemblies. The volume of burnable poison assemblies was reduced safely and securely by a factor of 7 to 14 for burnable poison rods and by 22 for hold-down portions. It was proved that the consolidation system is collectively feasible

  12. Nodal Diffusion Burnable Poison Treatment for Prismatic Reactor Cores

    International Nuclear Information System (INIS)

    Ougouag, A.M.; Ferrer, R.M.

    2010-01-01

    The prismatic block version of the High Temperature Reactor (HTR) considered as a candidate Very High Temperature Reactor (VHTR)design may use burnable poison pins in locations at some corners of the fuel blocks (i.e., assembly equivalent structures). The presence of any highly absorbing materials, such as these burnable poisons, within fuel blocks for hexagonal geometry, graphite-moderated High Temperature Reactors (HTRs) causes a local inter-block flux depression that most nodal diffusion-based method have failed to properly model or otherwise represent. The location of these burnable poisons near vertices results in an asymmetry in the morphology of the assemblies (or blocks). Hence the resulting inadequacy of traditional homogenization methods, as these 'spread' the actually local effect of the burnable poisons throughout the assembly. Furthermore, the actual effect of the burnable poison is primarily local with influence in its immediate vicinity, which happens to include a small region within the same assembly as well as similar regions in the adjacent assemblies. Traditional homogenization methods miss this artifact entirely. This paper presents a novel method for treating the local effect of the burnable poison explicitly in the context of a modern nodal method.

  13. Low reactivity penalty burnable poison rods

    International Nuclear Information System (INIS)

    1978-01-01

    A nuclear reactor burnable poison rod is described which consists of an elongated tubular sheath enclosing a neutron absorbing material which, at least during reactor operation, also encloses a neutron moderating material. The excess reactivity existing at the beginning of core life is compensated for by the depletion of the burnable poison throughout the life of the core, so that the life of the core is extended. (UK)

  14. Research on application of burnable poison in pebble bed HTR

    International Nuclear Information System (INIS)

    Wei Chunlin; Zhang Jian; Shan Wenzhi; Jing Xingqing

    2013-01-01

    Burnable poison in fuel ball was used in pebble bed high-temperature gas-cooled reactor (HTR) to optimize the shape and the peak factor of power distribution in certain conditions. Two options are available and evaluated, that is the homogeneous burnable poison in graphite matrix and burnable poison particles (BPPs) in fuel balls. Due to the absorption cross section of "1"0B, the depletion speed for homogeneous burnable poison is very fast, and difficult to control, on the other side, the depletion speed of BPPs can be optimized respecting to its size, and better shape and peak value of power distribution can be achieved. (authors)

  15. Depletion optimization of lumped burnable poisons in pressurized water reactors

    International Nuclear Information System (INIS)

    Kodah, Z.H.

    1982-01-01

    Techniques were developed to construct a set of basic poison depletion curves which deplete in a monotonical manner. These curves were combined to match a required optimized depletion profile by utilizing either linear or non-linear programming methods. Three computer codes, LEOPARD, XSDRN, and EXTERMINATOR-2 were used in the analyses. A depletion routine was developed and incorporated into the XSDRN code to allow the depletion of fuel, fission products, and burnable poisons. The Three Mile Island Unit-1 reactor core was used in this work as a typical PWR core. Two fundamental burnable poison rod designs were studied. They are a solid cylindrical poison rod and an annular cylindrical poison rod with water filling the central region.These two designs have either a uniform mixture of burnable poisons or lumped spheroids of burnable poisons in the poison region. Boron and gadolinium are the two burnable poisons which were investigated in this project. Thermal self-shielding factor calculations for solid and annular poison rods were conducted. Also expressions for overall thermal self-shielding factors for one or more than one size group of poison spheroids inside solid and annular poison rods were derived and studied. Poison spheroids deplete at a slower rate than the poison mixture because each spheroid exhibits some self-shielding effects of its own. The larger the spheroid, the higher the self-shielding effects due to the increase in poison concentration

  16. The research on burnup characteristic of doping burnable poison in PWR

    International Nuclear Information System (INIS)

    Qiang Shenglong; Qin Dong; Chai Xiaoming; Yao Dong

    2014-01-01

    In PWR core design, burnable poisons are usually used for reactive compensation and power flatten. The choice of burnable poisons and how to match burnup would be the key-points for a long-life core design. We study the burnup character of doping burnable poisons (such as natural element, manual nuclide and soluble boron) in the PWR by the core burnup code MOI based on Monte Carlo method. The results show that Hf, Er and Eu doping burnable poison would be applicable for the nuclear design research on the long-life PWR core. (authors)

  17. Initial study on burnable poisons in the Dragon HTR design

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, U; Pedersen, J

    1971-06-15

    A first study on the effects of burnable poisons in a High Temperature Reactor is given in this paper, and some of the problems concerning the layout and distribution of burnable poison sticks in the core are explained. Time has not allowed us to obtain satisfactory solutions to these problems, but we hope, that this study could form the basis of valuable discussions on ways and means to overcome the difficulties of burnable poison management in HTRs.

  18. Development of Improved Burnable Poisons for Commercial Nuclear Power Reactors

    International Nuclear Information System (INIS)

    Grossbeck, M. L.; Renier, J-P.A.; Bigelow, Tim

    2003-01-01

    Burnable poisons are used in nuclear reactors to produce a more level distribution of power in the reactor core and to reduce to necessity for a large control system. An ideal burnable poison would burn at the same rate as the fuel. In this study, separation of neutron-absorbing isotopes was investigated in order to eliminate isotopes that remain as absorbers at the end of fuel life, thus reducing useful fuel life. The isotopes Gd-157, Dy-164, and Er-167 were found to have desirable properties. These isotopes were separated from naturally occurring elements by means of plasma separation to evaluate feasibility and cost. It was found that pure Gd-157 could save approximately $6 million at the end of four years. However, the cost of separation, using the existing facility, made separation cost- ineffective. Using a magnet with three times the field strength is expected to reduce the cost by a factor of ten, making isotopically separated burnable poisons a favorable method of increasing fuel life in commercial reactors, in particular Generation-IV reactors. The project also investigated various burnable poison configurations, and studied incorporation of metallic burnable poisons into fuel cladding

  19. Minor actinide transmutation on PWR burnable poison rods

    International Nuclear Information System (INIS)

    Hu, Wenchao; Liu, Bin; Ouyang, Xiaoping; Tu, Jing; Liu, Fang; Huang, Liming; Fu, Juan; Meng, Haiyan

    2015-01-01

    Highlights: • Key issues associated with MA transmutation are the appropriate loading pattern. • Commercial PWRs are the only choice to transmute MAs in large scale currently. • Considerable amount of MA can be loaded to PWR without disturbing k eff markedly. • Loading MA to PWR burnable poison rods for transmutation is an optimal loading pattern. - Abstract: Minor actinides are the primary contributors to long term radiotoxicity in spent fuel. The majority of commercial reactors in operation in the world are PWRs, so to study the minor actinide transmutation characteristics in the PWRs and ultimately realize the successful minor actinide transmutation in PWRs are crucial problem in the area of the nuclear waste disposal. The key issues associated with the minor actinide transmutation are the appropriate loading patterns when introducing minor actinides to the PWR core. We study two different minor actinide transmutation materials loading patterns on the PWR burnable poison rods, one is to coat a thin layer of minor actinide in the water gap between the zircaloy cladding and the stainless steel which is filled with water, another one is that minor actinides substitute for burnable poison directly within burnable poison rods. Simulation calculation indicates that the two loading patterns can load approximately equivalent to 5–6 PWR annual minor actinide yields without disturbing the PWR k eff markedly. The PWR k eff can return criticality again by slightly reducing the boric acid concentration in the coolant of PWR or removing some burnable poison rods without coating the minor actinide transmutation materials from PWR core. In other words, loading minor actinide transmutation material to PWR does not consume extra neutron, minor actinide just consumes the neutrons which absorbed by the removed control poisons. Both minor actinide loading patterns are technically feasible; most importantly do not need to modify the configuration of the PWR core and

  20. Irradiation test of borosilicate glass burnable poison

    International Nuclear Information System (INIS)

    Feng Mingquan; Liao Zumin; Yang Mingjin; Lu Changlong; Huang Deyang; Zeng Wangchun; Zhao Xihou

    1991-08-01

    The irradiation test and post-irradiation examinations for borosilicate glass burnable poison are introduced. Examinations include visual examination, measurement of dimensions and density, and determination of He gas releasing and 10 B burnup. The corrosion and phenomenon of irradiation densification are also discussed. Two type glass samples have been irradiated with different levels of neutron flux. It proved that the GG-17 borosilicate glass can be used as burnable poison to replace the 10 B stainless steel in the Qinshan Nuclear Power Plant, and it is safe, economical and reasonable

  1. Burnable poison management in light water reactor lattices

    Energy Technology Data Exchange (ETDEWEB)

    Buenemann, D; Mueller, A

    1970-07-01

    For a better reactivity control and power flattening as well as for an increase in dynamic stability the use of burnable poisons in light water reactors has been considered. The main goals for a burnable poison management and its technological realisation are discussed. The poison is assumed to be in the form of separate poison rods or homogeneous or inhomogeneous poisoning in the fuel rods. A new concept with a central poison rod within the fuel rod is discussed. The balance-equation for the needed concentration of burnable poisons for reactivity central as well as the problems of optimization of lumped poisons are treated in connection with the fuel lattice burnup. A first approximation for the design is found. For the calculation of the microburnup of lumped poison and fuel the special code NEUTRA has been developed. The burnup-equation can be chosen either in a simplified burnup-version with 2 pseudo fission products for each fissionable isotope or with an extended system of burnup equations to be used at sophisticated calculations. These burnup equations are coupled to S{sub N}-routines optionally for cylindrical or x-y-geometry for the proper calculation of the microscopic isotope density-, flux-, and power distributions. The theoretical predictions have been checked by means of special experiments so as to determine the accuracy of the computations. Even for a relatively long burnup of the fuel the predicted values are found to be within the experimental error in the case of lumped rods containing a cadmium-alloy or boron carbide. (auth)

  2. Optimal burnable poison utilization in PWR core reload design

    International Nuclear Information System (INIS)

    Downar, T.J.

    1986-01-01

    A method was developed for determining the optimal distribution and depletion of burnable poisons in a Pressurized Water Reactor core. The well-known Haling depletion technique is used to achieve the end-of-cycle core state where the fuel assembly arrangement is configured in the absence of all control poison. The soluble and burnable poison required to control the core reactivity and power distribution are solved for as unknown variables while step depleting the cycle in reverse with a target power distribution. The method was implemented in the NRC approved licensing code SIMULATE

  3. Application of a hybrid method based on the combination of genetic algorithm and Hopfield neural network for burnable poison placement

    International Nuclear Information System (INIS)

    Khoshahval, F.; Fadaei, A.

    2012-01-01

    Highlights: ► The performance of GA, HNN and combination of them in BPP optimization in PWR core are adequate. ► It seems HNN + GA arrives to better final parameter value in comparison with the two other methods. ► The computation time for HNN + GA is higher than GA and HNN. Thus a trade-off is necessary. - Abstract: In the last decades genetic algorithm (GA) and Hopfield Neural Network (HNN) have attracted considerable attention for the solution of optimization problems. In this paper, a hybrid optimization method based on the combination of the GA and HNN is introduced and applied to the burnable poison placement (BPP) problem to increase the quality of the results. BPP in a nuclear reactor core is a combinatorial and complicated problem. Arrangement and the worth of the burnable poisons (BPs) has an impressive effect on the main control parameters of a nuclear reactor. Improper design and arrangement of the BPs can be dangerous with respect to the nuclear reactor safety. In this paper, increasing BP worth along with minimizing the radial power peaking are considered as objective functions. Three optimization algorithms, genetic algorithm, Hopfield neural network optimization and a hybrid optimization method, are applied to the BPP problem and their efficiencies are compared. The hybrid optimization method gives better result in finding a better BP arrangement.

  4. Burnable poison option for DUPIC fuel

    International Nuclear Information System (INIS)

    Choi, Hang Bok; Cupta, H. P.

    1996-08-01

    The mechanisms of positive coolant void reactivity of CANDU natural uranium and DUPIC fuel have been studied. The design study of DUPIC fuel was performed using the burnable poison material in the center pin to reduce the coolant void reactivity. The amount of burnable poison was determined such that the prompt inverse period of DUPIC fuel upon full coolant voiding is the same as that of natural uranium fuel at equilibrium burnup. A parametric study on various burnable poisons has shown that natural dysprosium has more merit over other materials because it uniformly controls the void reactivity throughout the burnup with reasonable amount of poison. Additional studies on the option of using scattering or absorber material in the center pin position and the option using variable fuel density were performed. In any case of option using variable fuel density were performed. In any case of options to reduce the void reactivity, it was found that either the discharge burnup and/or the relative linear pin power are sacrificed. A preliminary study was performed for the evaluation of reference DUPIC fuel performance especially represented by Stress Corrosion Cracking(SCC) parameters which is mainly influenced by the refueling operations. For the reference 2-bundle shift refueling scheme, the predicted ramped power and power increment of the reference DUPIC fuel are below the SCC thresholds of CANDU natural uranium fuel. For a 4-bundle shift refueling scheme, the envelopes of element ramped power and power increment upon refueling are 8% and 44% higher than those of a 2-bundle shift refueling scheme on the average, respectively, but still have margins to the failure thresholds of natural uranium fuel. 23 tabs., 25 figs., 20 refs. (Author)

  5. Production method of burnable poison incorporated fuel pellet by coating

    International Nuclear Information System (INIS)

    Naito, Naoyoshi.

    1993-01-01

    A cylindrical member is formed with an organic material which is melted, decomposed or evaporated by heating. Such organic materials include polyethylene and polyvinyl alcohol, for example. A predetermined amount of burnable poisons are homogeneously incorporated in the cylindrical member by a means, such as melting before fabricating it into a cylindrical shape. UO 2 fuel pellets are inserted to the cylindrical member and heated, to scatter only the organic materials, so that non-volatile burnable poisons are homogeneously left on the surface of the pellets. It is preferred that the cylindrical member having pellets inserted therein is inserted to a cladding tube and applied with a heat treatment. With such procedures, a UO 2 pellet is coated with burnable poisons by a convenient and compact device. In addition, grinding step after the coating is unnecessary. (I.N.)

  6. Effects of the burnable poison heterogeneity on the long term control of excess of reactivity

    International Nuclear Information System (INIS)

    Talamo, Alberto

    2006-01-01

    According to the different geometry shape, the theory of black burnable particles predicts that the evolution of the poison macroscopic absorption cross section is exponentially, quadratic or linear when the burnable poison is displaced in homogeneous distribution, microspheres or needlecylinders heterogeneous distributions, respectively. In the present studies, we took advantage of the Monte Carlo Continuous Energy Burnup Code MCB to verify the black burnable particles theory on the Gas Turbine - Modular Helium Reactor fuelled by military plutonium at the year the fuel reaches the equilibrium composition; we investigated 8 different burnable poisons, B, Cd, Er, Eu, Gd, Dy, Hf and Sm, in three different geometry configurations and we have found that the numerical results qualitatively match the theory predictions when burnable poisons are disposed in small particles

  7. Effects of the burnable poison heterogeneity on the long term control of excess of reactivity

    Energy Technology Data Exchange (ETDEWEB)

    Talamo, Alberto [Department of Nuclear and Reactor Physics, Royal Institute of Technology - KTH, Roslagstullsbacken 21, S-10691, Stockholm (Sweden)]. E-mail: alby@neutron.kth.se

    2006-06-15

    According to the different geometry shape, the theory of black burnable particles predicts that the evolution of the poison macroscopic absorption cross section is exponentially, quadratic or linear when the burnable poison is displaced in homogeneous distribution, microspheres or needlecylinders heterogeneous distributions, respectively. In the present studies, we took advantage of the Monte Carlo Continuous Energy Burnup Code MCB to verify the black burnable particles theory on the Gas Turbine - Modular Helium Reactor fuelled by military plutonium at the year the fuel reaches the equilibrium composition; we investigated 8 different burnable poisons, B, Cd, Er, Eu, Gd, Dy, Hf and Sm, in three different geometry configurations and we have found that the numerical results qualitatively match the theory predictions when burnable poisons are disposed in small particles.

  8. Spider and burnable poison rod combinations

    International Nuclear Information System (INIS)

    Walton, L.A.

    1980-01-01

    A description is given of an improved design of burnable poison rods and their associated spiders used in the fuel assemblies of pressurized water power reactor cores which allows the rods to be installed and removed more quickly, simply and gently than in previously described systems. (U.K.)

  9. Development of Improved Burnable Poisons for Commercial Nuclear Power Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Renier, J.A.

    2002-04-17

    Burnable poisons are used in all modern nuclear reactors to permit higher loading of fuel without the necessity of an overly large control rod system. This not only permits a longer core life but can also be used to level the power distribution. Commercial nuclear reactors commonly use B{sub 4}C in separate non-fueled rods and more recently, zirconium boride coatings on the fuel pellets or gadolinium oxide mixed with the fuel. Although the advantages are great, there are problems with using these materials. Boron, which is an effective neutron absorber, transmutes to lithium and helium upon absorption of a neutron. Helium is insoluble and is eventually released to the interior of the fuel rod, where it produces an internal pressure. When sufficiently high, this pressure stress could cause separation of the cladding from the fuel, causing overly high centerline temperatures. Gadolinium has several very strongly absorbing isotopes, but not all have large cross sections and result in residual burnable poison reactivity worth at the end of the fuel life. Even if the amount of this residual absorber is small and the penalty in operation small, the cost of this penalty, even if only several days, can be very high. The objective of this investigation was to study the performance of single isotopes in order to reduce the residual negative reactivity left over at the end of the fuel cycle. Since the behavior of burnable poisons can be strongly influenced by their configuration, four forms for the absorbers were studied: homogeneously mixed with the fuel, mixed with only the outer one-third of the fuel pellet, coated on the perimeter of the fuel pellets, and alloyed with the cladding. In addition, the numbers of fuel rods containing burnable poison were chosen as 8, 16, 64, and 104. Other configurations were chosen for a few special cases. An enrichment of 4.5 wt% {sup 235}U was chosen for most cases for study in order to achieve a 4-year fuel cycle. A standard pressurized

  10. Reactivity and neutron flux measurements in IPEN/MB-01 reactor with B4C burnable poison

    International Nuclear Information System (INIS)

    Fer, Nelson Custodio; Moreira, Joao Manoel Losada

    2000-01-01

    Burnable poison rods, made of B 4 C- Al 2 O 3 pellets with 5.01 mg/cm 3 10 B concentration, have been manufactured for a set of experiments in the IPEN/MB-01 zero-power reactor. Several core parameters which are affected by the burnable poisons rods have been measured. The principal results, for the situation in which the burnable poison rods are located near the absorber rods of a control rod, are they cause a 29% rod worth shadowing, a reduction of 39% in the local void coefficient of reactivity, a reduction of 4.8% in the isothermal temperature coefficient of reactivity, and a reduction of 9% in the thermal neutron flux in the region where the burnable poison rods are located. These experimental results will be used for the validation of burnable poison calculation methods in the CTMSP. (author)

  11. Absorber management using burnable poisons

    International Nuclear Information System (INIS)

    Mortensen, L.

    1977-06-01

    An investigation of the problem of optimal control carried out by means of a two-dimensional model of a PWR reactor. A solution is found to the problem, and the possibility of achieving optimal control with burnable poisons such as boron, cadmium and gadolinium is discussed. Further, an attempt is made to solve the control problem of BWR, but no final solution is found. (author)

  12. Optimization of burnable poison disposition for in-core fuel assemblies

    International Nuclear Information System (INIS)

    Zhong Wenfa; Luo Rong; Zhou Quan

    1997-09-01

    The optimization of the burnable poison disposition in the initial core loading of the 200 MW nuclear heating reactor (NHR-200), is studied. The mass fraction of the burnable poison is used as the control variable with the objective to minimize the power peaking factor. The flexible tolerance method is used to solve the nonlinear programming optimal problem. The optimization method can be used in reactor physics design, and get a new pattern of initial core which is of reference value. (2 refs., 8 figs., 1 tab.)

  13. Spider and burnable poison rod combinations

    International Nuclear Information System (INIS)

    Edwards, G.T.; Schluderberg, D.C.

    1980-01-01

    An improved design of burnable poison rods and associated spiders used in fuel assemblies of pressurized water power reactor cores, is described. The rods are joined to the spider arms in a manner which is proof against the reactor core environment and yet allows the removal of the rods from the spider simply, swiftly and delicately. (U.K.)

  14. Neutron evaluation of burnable poison insertion in pressurized water reactor

    International Nuclear Information System (INIS)

    Faria, Rochkhudson Batista de

    2013-01-01

    The development of this work was to match the 'Burn-up Credit Criticality Benchmark - Phase II-D - PWR-UO 2 Assembly Study of Control Rod Effects on Spent Fuel Composition' (case 15), which was modeled using the code MCNP5 and SCALE 6.0. The results of the infinite multiplication factor (k inf ) were compared with those obtained by international institutions. Later we performed in this same benchmark, a sensitivity analysis using SCALE 6.0. Thus, we tested several changes in case 15 of Benchmark, such as insertion of different percentages of burnable poison, changing the number and positions of the rods. In all cases were analyzed, comparisons and discussions about the results. The same methodology was applied to the reactor core of the Nuclear Plant in Brazil, Angra II, initially to evaluate its behavior when subjected to a variation in the percentage of burnable poison and then, introduce changes also in the enrichment of nuclear fuel, doing the appropriate comparisons of results. Considering results and experience gained, the Department of Nuclear Engineering, is prepared to control analysis of reactivity with the use of different types of burnable poisons under the code SCALE 6.0 through its various modules. (author)

  15. Calculation qualification of gadolinium burnable poisons in water reactors

    International Nuclear Information System (INIS)

    Chaucheprat, P.

    1988-01-01

    The work presented in this thesis constitutes the qualification on the one end of Appolo-Neptune scheme for the gadolinium burnable poison in a pressurized water reactor, and on the other end of basis nuclear data on natural gadolinium. This study has permitted to reduce by a factor 3 the actual incertitude on the gadolinium poison comparatively at precisions cited in international benchmarks calculations [fr

  16. Neutronic analysis of Gd2O3 as burnable poison

    International Nuclear Information System (INIS)

    Lecot, C.A.

    1990-01-01

    For the reactors core design, the use of burnable poisons is one of the options for the control of in excess reactivity and the power form factor. As alternative procedures, the absorbing material may be included in pellets of an inert material or in fuel pellets. Besides, a cladding material and the locations of the fuel elements must be chosen for the first case. The CAREM reactor core design foresees the use of gadolinium oxide (Gd 2 O 3 ) as burnable poison. In this work, a comparative study was made, from the neutronic point of view, among the following alternatives for the poisons location: a) Gd 2 O 3 bars supports in alumina (Al 2 O 3 ), sheathed in steel; b) Gd 2 O 3 bars supports in alumina sheathed in Zry-4; c) Gd 2 O 3 in uranium dioxide (UO 2 ) fuel pellets. (Author) [es

  17. Optimization of PWR fuel assembly radial enrichment and burnable poison location based on adaptive simulated annealing

    International Nuclear Information System (INIS)

    Rogers, Timothy; Ragusa, Jean; Schultz, Stephen; St Clair, Robert

    2009-01-01

    The focus of this paper is to present a concurrent optimization scheme for the radial pin enrichment and burnable poison location in PWR fuel assemblies. The methodology is based on the Adaptive Simulated Annealing (ASA) technique, coupled with a neutron lattice physics code to update the cost function values. In this work, the variations in the pin U-235 enrichment are variables to be optimized radially, i.e., pin by pin. We consider the optimization of two categories of fuel assemblies, with and without Gadolinium burnable poison pins. When burnable poisons are present, both the radial distribution of enrichment and the poison locations are variables in the optimization process. Results for 15 x 15 PWR fuel assembly designs are provided.

  18. Design and test of the borosilicate glass burnable poison rod for Qinshan nuclear power plant core

    International Nuclear Information System (INIS)

    Huang Jinhua; Sun Hanhong

    1988-08-01

    Material for the burnable poison of Qinshan Nuclear Power Plant core is GG-17 borosilicate glass. The chemical composition and physico-chemical properties of GG-17 is very close to Pyrex-7740 glass used by Westinghouse. It is expected from the results of the experiments that the borosilicate glass burnable poison rod can be successfully used in Qinshan Nuclear Power Plant due to good physical, mechanical, corrosion-resistant and irradiaton properties for both GG-17 glass and cold-worked stainless steel cladding. Change of material for burnable poison from boron-bearing stainless steel to borosilicate glass will bring about much more economic benefit to Qinshan Naclear Power Plant

  19. Burnable poison rod for a nuclear reactor fuel assembly

    International Nuclear Information System (INIS)

    Funk, C.E.; Oneufer, A.S.

    1984-01-01

    A burnable poison rod for use in a nuclear reactor fuel assembly which includes concentrically disposed rods having an annular space therebetween which extends the full length of the rods. The inner rod is hollow to permit circulation of coolant therethrough. Annular burnable poison pellets are positioned in the annular space which is closed at both ends by plugs. A spring clip is located in the plenum space above the pellet stack in the rods. The spring clip is of cylindrical configuration having a gap in the material which provides two ends adapted to be squeezed toward each other. A cross section of the clip shows that its ends contain alternating flat and round edges, the round edges conforming to the outer rod inner surface to provide a retentive force which is releasably applied to the pellet stack as it grows during operation in a reactor

  20. Optimization of gadolinium burnable poison loading by the conjugate gradients method

    International Nuclear Information System (INIS)

    Drumm, C.R.

    1984-01-01

    Improved use of burnable poison is suggested for pressurized water reactors (PWR's) to insure a sufficiently negative moderator temperature coefficient of reactivity for extended burnup cycles and low leakage refueling patterns. The use of gadolinium as a burnable poison can lead to large axial fluctuations in the power distribution through the cycle. The goal of this work is to determine the optimal axial distribution of gadolinium burnable poison in a PWR to overcome the axial fluctuations, yielding an improved power distribution. The conjugate gradients optimization method is used in this work because of the high degree of nonlinearity of the problem. The neutron diffusion and depletion equations are solved for a one-dimensional one-group core model. The state variables are the flux, the critical soluble boron concentration, and the burnup. The control variables are the number of gadolinium pins per assembly and the beginning-of-cycle gadolinium concentration, which determine the gadolinium cross section. Two separate objectives are considered: 1) to minimize the power peaking factor, which will minimize the capital cost of the plant; and 2) to maximize the cycle length, which will minimize the fuel cost for the plant. It is shown in this work that optimizing the gadolinium distribution can yield an improved power distribution

  1. MCNP apply in calculating reactor critical coefficient Keff under the changing of the burnable poison rod

    International Nuclear Information System (INIS)

    Wang Xinghua; Zhou Sichun; Zhang Qingxian; Zhao Feng; Liu Jun; Zhu Jian

    2013-01-01

    Taking Qinshan nuclear power plant as an example, in this paper, Monte Carlo method was used in the MCNP procedures for the establishment of nuclear power station simulation model, construct the reactor pressure vessel and vessel core component composition and arrangement, KCODE card was used to calculate the effect of the number and the location of burnable poison control rod factor K eff by the boron acid. The calculation results show that, with the increasing in the number of burnable poison control rod value-added factor K eff shown a downward trend, and with the burnable poison control rod from the dense to sparse, which K eff will be decreasing slowly. This condition is consistent with the theoretical. (authors)

  2. The treatment of burnable poison pins in LWRWIMS

    International Nuclear Information System (INIS)

    Halsall, M.J.

    1982-12-01

    This report describes an investigation into the modelling approximations normally made when the LWR lattice code LWRWIMS is used for design calculations on assemblies containing burnable poison pins. Parameters investigated include energy group structure, intervals between calculations in MWd/te and spatial subdivision of the poison pins. An estimate is made of the effect of using pin-cell smearing with diffusion theory for the assembly geometry, instead of a more exact heterogeneous transport theory calculation. The influence on reactivity of the minor gadolinium isotopes 152, 154, 156, 158 and 160 in a poison pin dominated by the isotopes 155 and 157 is presented, and finally, recommendations on the use of LWRWIMS for this type of calculation are made. (author)

  3. Methods of assembling and disassembling spider and burnable poison rod structures for nuclear reactors

    International Nuclear Information System (INIS)

    Edwards, G.T.; Schluderberg, D.C.

    1981-01-01

    A technique is provided for engaging and disengaging burnable poison rods from a spider in a nuclear reactor fuel assembly. A cap on the end of each of the burnable poison rods is provided with a shank or stem that is received in a respective bore formed in the spider. A frangible flange secures the shank and rod to the spider. Pressing the shank in the direction of the bore axis by means, e.g., of a plate ruptures the frangible flange to release the rod from the spider. (author)

  4. Experimental and theoretical burnup investigations on model arrangements with solid burnable poisons

    International Nuclear Information System (INIS)

    Ahlf, J.; Anders, D.; Greim, L.; Knoth, J.; Kolb, M.; Mittelstaedt, B.; Mueller, A.; Schwenke, H.

    1975-01-01

    It is the scope of the two experiments here to improve the methods for computation and measurement as well as the experimental technique appropriate to predict the burnable poison rod burn-up with sufficient accuracy. In the first experiment two nine-rod bundles in a 3 x 3 arrangement are irradiated during several irradiation periods in the research reactor Geesthacht. Each bundle consists of eight outer rods containing fuel and one inner rod containing poison (B 10 or Cd 113). The burn-up of the fuel and the burnable poison is measured by non-destructive methods after each irradiation period and then compared with results of a burn-up calculation. In the second experiment two poison rods with different cadmium concentrations and one rod containing boron are irradiated during several irradiation periods in the research reactor Geesthacht. The burn-up is determined after each irradiation period by reactivity measurements and its result compared to computed effective absorption cross-sections of the rods by aid of a calibration curve. For both experiments the experimental and theoretical results for the poison burn-up are found to be within the error limits of the measurements. (orig.) [de

  5. Experimental and theoretical investigations on solid burnable poison burnup of model arrangements

    International Nuclear Information System (INIS)

    Ahlf, J.; Anders, D.; Greim, L.; Knoth, J.; Kolb, M.; Mittelstaedt, B.; Mueller, A.; Schwenke, H.

    1975-01-01

    It is the scope of the two experiments reported here to improve the methods for computation and measurement as well as the experimental technique appropriate to predict the burnable poison rod burn-up with sufficient accuracy. In the first experiment two nine-rod bundles in a 3 x 3 arrangement are irradiated during several irradiation periods in the research reactor Geesthacht. Each bundle consists of eight outer rods containing fuel and one inner rod containing poison (B 10 or Cd 113). The burn-up of the fuel and the burnable poison is measured by non-destructive methods after each irradiation period and then compared with results of a burn-up calculation. In the second experiment two poison rods with different cadmium concentrations and one rod containing boron are irradiated during several irradiation periods in the research reactor Geesthacht. The burn-up is determined after each irradiation period by reactivity measurements and its result compared to computed effective absorption cross-sections of the rods by aid of a calibration curve. For both experiments the experimental and theoretical results for the poison burn-up are found to be within the error limits of the measurements. (orig.) [de

  6. The manufacture process and properties of (U, Gd)O2 burnable poisonous fuel pellets

    International Nuclear Information System (INIS)

    Yi Wei; Tang Yueming; Dai Shengping; Yang Youqing; Zuo Guoping; Wu Shihong; Gu Xiaofei; Gu Mingfei

    2006-03-01

    The main properties of important raw powder materials used in the (U, Gd)O 2 burnable poisonous fuel pellets production line of NPIC are presented. The powders included UO 2 , Gd 2 O 3 , (U, Gd) 3 O 8 and necessary additives, such as ammonium oxalate and zinc stearate. And the main properties of (U, Gd)O 2 burnable poisonous fuel pellets and the manufacture processes, such as ball-milling blending, granulation, pressing, sintering and grinding are also described. Moreover, the main effect of the process parameters controlled in the manufacture process have been discussed. (authors)

  7. Burnable poison calculations for Mk.III gas-cooled reactor systems

    Energy Technology Data Exchange (ETDEWEB)

    Gubbins, M E

    1971-02-15

    A method of calculating the reactivity and burn-up hisotry of a Mk.III GCR system containing burnable poisons has been described. The method allows for poison-fuel interaction. Using the method it has been shown that burn-up of the poison under a constant incident flux can give errors of the order of 1-2 niles. A calculation using the method described will take about 50% longer than a straightforward fuel burn-up calculation in the same number of groups. The multi-cell approach has a potential for handling greater geometrical complexity. It is intended to compare the method against experiment as soon as suitable experimental results become available.

  8. Safety aspects of the using Gd as burnable poison in PWR's

    International Nuclear Information System (INIS)

    Vandenberg, C.; Bonet, H.; Charlier, A.

    1978-01-01

    The experience of BELGONUCLEAIRE in using Gd in LWR's has indicated the safety related advantages of this burnable poison. The successfully operation of the BR3 PWR power plant with 5% of Gd rods is presented and extrapolated to large PWR's. (authro)

  9. Reactivity determination of the Al2O3-B4C burnable poison as a function of its concentration in the IPEN/MB-01 reactor

    International Nuclear Information System (INIS)

    Giada, Marino Reis

    2005-01-01

    Burnable poison rods made of Al 2 O 3 -B 4 C pellets with different concentrations of 10 B have been manufactured for a set of experiments in the IPEN/MB-01 zero-power reactor. The experiments evaluated the reactivity of the burnable poison rods as a function of the 10 B concentration, and the shadowing effect on the control rod reactivity worth as a function of the distance between the burnable position rods and the control rod. The results showed that the burnable poison rods have a non-linear behavior as function of the 10 B concentration, starting to reach an asymptotic value for concentrations higher than 7 g/cm 3 of 10 B. The shadowing effect on the control rods was substantial. When the burnable poison rods were beside the control rod, its reactivity worth decreased as much as 30 %, and when they were 10,5 cm distant, the control rod worth decreased by 7 %. The MCNP results for the burnable poison reactivity effects agreed within experimental errors with the measured values. (author)

  10. Heterogeneous burnable poisons. Sinterability study in oxidizing atmosphere of alumina-gadolinia and alumina-boron carbide compounds

    International Nuclear Information System (INIS)

    Agueda, H.C.; Leiva, S.F.; Russo, D.O.

    1990-01-01

    Solid burnable poisons are used in reactors cooled by pressure light water (PLWR) with the purpose of controlling initial reactivity in the first reactor's core. The burnable poisons may be uniformly mixed with the fuel -known as 'homogeneous' poisons-; or constituting separate elements -known as heterogeneous poisons-. The purpose of this work is to present the results of two sinterability studies, performed on Al 2 O 3 -Gd 2 O 3 and Al 2 O 3 -B 4 C, where alumina acts as inert matrix, storing the absorbing elements as Gd 2 O 3 or B 4 C. The elements were sintered at an air atmosphere and additives permitting the obtention of a greater density alumina were tested at lower temperatures than the characteristic for this material, in order to determine its compatibility with the materials dealt with herein. (Author) [es

  11. Neutronic analysis of a fuel element with variations in fuel enrichment and burnable poison

    Energy Technology Data Exchange (ETDEWEB)

    Faria, Rochkhudson B. de; Martins, Felipe; Velasquez, Carlos E.; Cardoso, Fabiano; Fortini, Angela; Pereira, Claubia, E-mail: rochkdefaria@yahoo.com.br, E-mail: claubia@nuclear.ufmg.br [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Departamento de Engenharia Nuclear

    2017-07-01

    In this work, the goal was to evaluate the neutronic behavior during the fuel burnup changing the amount of burnable poison and fuel enrichment. For these analyses, it was used a 17 x 17 PWR fuel element, simulated using the 238 groups library cross-section collapsed from ENDF/BVII.0 and TRITON module of SCALE 6.0 code system. The results confirmed the effective action of the burnable poison in the criticality control, especially at Beginning Of Cycle (BOC) and in the burnup kinetics, because at the end of the fuel cycle there was a minimal residual amount of neutron absorbers ({sup 155}Gd and {sup 157}Gd), as expected. At the end of the cycle, the fuel element was still critical in all simulated situations, indicating the possibility of extending the fuel burn. (author)

  12. Neutronic analysis of the JMTR with LEU fuel and burnable poison

    Energy Technology Data Exchange (ETDEWEB)

    Nagaoka, Yoshiharu; Oyamada, Rokuro [Japan Atomic Energy Research Institute, Oarai-machi Ibaraki-ken (Japan); Matos, J E; Woodruff, W L [Argonne National Laboratory, Argonne, IL (United States)

    1985-07-01

    The results of neutronics calculations are presented for the JMTR equilibrium core with LEU silicide fuel, boron and cadmium burnable poisons in the sideplates, and a cycle length of 24 days instead of 11 days with the current HEU fuel. The data indicate that several options are feasible provided that silicide fuels with high uranium densities are successfully demonstrated and licensed (author)

  13. Neutronic analysis of the JMTR with LEU fuel and burnable poison

    International Nuclear Information System (INIS)

    Nagaoka, Yoshiharu; Oyamada, Rokuro; Matos, J.E.; Woodruff, W.L.

    1985-01-01

    The results of neutronics calculations are presented for the JMTR equilibrium core with LEU silicide fuel, boron and cadmium burnable poisons in the sideplates, and a cycle length of 24 days instead of 11 days with the current HEU fuel. The data indicate that several options are feasible provided that silicide fuels with high uranium densities are successfully demonstrated and licensed (author)

  14. Neutronic analysis of the JMTR with LEU fuel and burnable poison

    International Nuclear Information System (INIS)

    Nagaoka, Yoshiharu; Oyamada, Rokuro; Matos, J.E.; Woodruff, W.L.

    1984-01-01

    The results of neutronics calculations are presented for the JMTR equilibrium core with LEU silicide fuel, boron and cadmium burnable poisons in the sideplates, and a cycle length of 24 days instead of 11 days with the current HEU fuel. The data indicate that several options are feasible provided that silicide fuels with high uranium densities are successfully demonstrated and licensed. 2 refs., 10 figs., 5 tabs

  15. Review of the status of reactor physics predictive methods for burnable poisons in CAGRs

    International Nuclear Information System (INIS)

    Edens, D.J.; McEllin, M.

    1983-01-01

    An essential component of the design of Commercial Advanced Gas Cooled Reactor fuel necessary to achieve higher discharge irradiations is the incorporation of burnable poisons. The poisons enable the more highly enriched fuel required to reach higher irradiation to be loaded without increasing the peak channel power. The optimum choice of fuel enrichment and poison loading will be made using reactor physics predictive methods developed by Berkeley Nuclear Laboratories. These methods and the evidence available to support them from theoretical comparisons, zero energy experiments, WAGR irradiations, and measurements on operating CAGRs are described. (author)

  16. Review of the status of reactor physics predictive methods for burnable poisons in CAGRs

    International Nuclear Information System (INIS)

    Edens, D.J.; McEllin, M.

    1983-01-01

    An essential component of the design of Commercial Advanced Gas Cooled Reactor fuel necessary to achieve higher discharge irradiations is the incorporation of burnable poisons. The poisons enable the more highly enriched fuel required to reach higher irradiation to be loaded without increasing the peak channel power. The optimum choice of fuel enrichment and poison loading will be made using reactor physics predictive methods developed by Berkeley Nuclear Laboratories. The paper describes these methods and the evidence available to support them from theoretical comparisons, zero energy experiments, WAGR irradiations, and measurements on operating CAGR's. (author)

  17. Methods of assembling and disassembling spider and burnable poison rod structures for nuclear reactors

    International Nuclear Information System (INIS)

    Walton, L.A.

    1981-01-01

    A method is described of joining burnable poison rods to the spider arms of a pressurised water power reactor fuel assembly which is proof against the reactor core environment but permits these rods to be removed from the spider simply, swiftly and delicately. (U.K.)

  18. New long-cycle small modular PWR cores using particle type burnable poisons for low boron operation

    Energy Technology Data Exchange (ETDEWEB)

    Yoo, Hoseong; Hwang, Dae Hee [Department of Nuclear Engineering, Kyung Hee University, Deogyeong-daero, GiHeung-gu, Yongin, Gyeonggi-do 446-701 (Korea, Republic of); Hong, Ser Gi, E-mail: sergihong@khu.ac.kr [Department of Nuclear Engineering, Kyung Hee University, Deogyeong-daero, GiHeung-gu, Yongin, Gyeonggi-do 446-701 (Korea, Republic of); Shin, Ho Choel [Core and Fuel Analysis Group, Korea Hydro & Nuclear Power Central Research Institute (KHNP-CRI), Daejon 305-343 (Korea, Republic of)

    2017-04-01

    Highlights: • New advanced burnable poison rods (BPR) are suggested for low boron operation in PWR. • The new SMR cores have long cycle length of ∼4.5 EFPYs with low boron concentration. • The SMR core satisfies all the design targets and constraints. - Abstract: In this paper, new small long-cycle PWR (Pressurized Water Reactor) cores for low boron concentration operation are designed by employing advanced burnable poison rods (BPRs) in which the BISO (Bi-Isotropic) particles of burnable poison are distributed in a SiC matrix. The BPRs are designed by adjusting the kernel diameter, the kernel material and the packing fraction to effectively reduce the excess reactivity in order to reduce the boron concentration in the coolant and achieve a flat change in excess reactivity over a long operational cycle. In addition, axial zoning of the BPRs was suggested to improve the core performances, and it was shown that the suggested axial zoning of BPRs considerably extends the cycle length compared to a core with no BPR axial zoning. The results of the core physics analyses showed that the cores using BPRs with a B{sub 4}C kernel have long cycle lengths of ∼4.5 EFPYs (Effective Full Power Years), small maximum CBCs (Critical Boron Concentration) lower than 370 ppm, low power peaking factors, and large shutdown margins of control element assemblies.

  19. Burnable absorber coated nuclear fuel

    International Nuclear Information System (INIS)

    Chubb, W.; Radford, K.C.; Parks, B.H.

    1984-01-01

    A nuclear fuel body which is at least partially covered by a burnable neutron absorber layer is provided with a hydrophobic overcoat generally covering the burnable absorber layer and bonded directly to it. In a method for providing a UO 2 fuel pellet with a zirconium diboride burnable poison layer, the fuel body is provided with an intermediate niobium layer. (author)

  20. Neutron physical investigations on the use of burnable poisons and gray absorber rods in large pressurized water reactors

    International Nuclear Information System (INIS)

    Brosche, C.; Katinger, T.; Kollmar, W.; Thieme, K.; Wagner, M.R.

    1977-11-01

    Methods and results of neutron physics calculations are described using burnable poisons and gray absorber rods in large PWR's. Calculated and measured values are compared, the effort for programming has been guessed. (orig.) [de

  1. Measurement of reactivity worths of burnable poison rods in enriched uranium graphite-moderated core simulated to high temperature gas cooled reactor

    International Nuclear Information System (INIS)

    Akino, Fujiyoshi; Takeuchi, Motoyoshi; Kitadate, Kenji; Yoshifuji, Hisashi; Kaneko, Yoshihiko

    1980-11-01

    As the core design for the Experimental Very High Temperature Gas Cooled Reactor progresses, evaluation of design precision has become increasingly important. For a high precision design, it is required to have adequate group constants based on accurate nuclear data, as well as calculation methods properly describing the physical behavior of neutrons. We, therefore, assembled a simulation core for VHTR, SHE-14, using a graphite-moderated 20%-enriched uranium Semi-Homogeneous Experimental Critical Facility (SHE), and obtained useful experimental data in evaluating the design precision. The VHTR is designed to accommodate burnable poison and control rods for reactivity compensation. Accordingly, the experimental burnable poison rods which are similar to those to be used in the experimental reactor were prepared, and their reactivity values were measured in the SHE-14 core. One to three rods of the above experimental burnable poison rods were inserted into the central column of the SHE-14 core, and the reactivity values were measured by the period and fuel rod substitution method. The results of the measurements have clearly shown that due to the self-shielding effect of B 4 C particles the reactivity value decreases with increasing particle diameter. For the particle diameter, the reactivity value is found to increase linearly with the logarithm of boron content. The measured values and those calculated are found to agree with each other within 5%. These results indicate that the reactivity of the burnable poison rod can be estimated fairly accurately by taking into account the self-shielding effect of B 4 C particles and the heterogeneity of the lattice cell. (author)

  2. Study of the Effect of Burnable Poison Particles Applying in a Pebble Bed HTR

    International Nuclear Information System (INIS)

    Wei Chunlin; Zhao Jing; Zhang Jian; Xia Bing

    2014-01-01

    In pebble bed high temperature gas cooled reactors (HTR), spherical fuel elements pass through the core several times to balance the burnup process in the fuel region, resulting in an acceptable shape and peak factor of power density in the simulation analysis. In contrast, when fuel elements pass through the core only once, the peak of power density occurs at the top of the core and its value is too high to be safe. These indicators/parameters can be improved by incorporating burnable poison in the fuel elements under certain conditions. In the current study, burnable poison particles (BPPs) in fuel elements are evaluated. In spite of the strong absorption capability of "1"0B, BPPs can decrease the depletion speed and increase the duration of "1"0B because of the self-shielding effect, resulting in improved shape and peak factor of power distribution. Several BPPs with different radius are discussed in power distribution, following the calculation for a full-scale reactor core with modified VSOP code. According the result, applying BPPs on fuel pebbles is an effective means to improve the distribution of the power density under one-through fuel load in HTR. (author)

  3. Managing the reactivity excess of the gas turbine-modular helium reactor by burnable poison and control rods

    International Nuclear Information System (INIS)

    Talamo, Alberto

    2006-01-01

    The gas turbine-modular helium reactor coupled to the deep burn in-core fuel management strategy offers the extraordinary capability to incinerate over 50% of the initial inventory of fissile material. This extraordinary feature, coming from an advanced and well tested fuel element design, which takes advantage of the TRISO particles technology, is maintained while the reactor is loaded with the most different types of fuels. In the present work, we assumed the reactor operating at the equilibrium of the fuel composition, obtained by a 6 years irradiation of light water reactor waste, and we investigated the effects of the introduction of the burnable poison and the control rods; we equipped the core with all the three types of control rods: operational, startup and shutdown ones. We employed as burnable poison natural erbium, due to the 167 Er increasing neutron capture microscopic cross-section in the energy range where the neutron spectrum exhibits the thermal peak; in addition, we utilized boron carbide, with 90% enrichment in 1 B, as the absorption material of the control rods. Concerning the burnable poison studies, we focused on the k eff value, the 167 Er mass during burnup, the influence of modifying the radius of the BISO particles kernel and the fuel and moderator coefficients of temperature. Concerning the control rods studies, we investigated the reactivity worth, the changes in the neutron flux profile due to a partial insertion, the influence of modifying the radius of the BISO particles kernel and the β eff , at the beginning of the operation

  4. Managing the reactivity excess of the gas turbine-modular helium reactor by burnable poison and control rods

    Energy Technology Data Exchange (ETDEWEB)

    Talamo, Alberto [Department of Nuclear and Reactor Physics, Royal Institute of Technology, Roslagstullsbacken 21, S-10691, Stockholm (Sweden)]. E-mail: alby@neutron.kth.se

    2006-01-15

    The gas turbine-modular helium reactor coupled to the deep burn in-core fuel management strategy offers the extraordinary capability to incinerate over 50% of the initial inventory of fissile material. This extraordinary feature, coming from an advanced and well tested fuel element design, which takes advantage of the TRISO particles technology, is maintained while the reactor is loaded with the most different types of fuels. In the present work, we assumed the reactor operating at the equilibrium of the fuel composition, obtained by a 6 years irradiation of light water reactor waste, and we investigated the effects of the introduction of the burnable poison and the control rods; we equipped the core with all the three types of control rods: operational, startup and shutdown ones. We employed as burnable poison natural erbium, due to the {sup 167}Er increasing neutron capture microscopic cross-section in the energy range where the neutron spectrum exhibits the thermal peak; in addition, we utilized boron carbide, with 90% enrichment in {sup 1}B, as the absorption material of the control rods. Concerning the burnable poison studies, we focused on the k {sub eff} value, the {sup 167}Er mass during burnup, the influence of modifying the radius of the BISO particles kernel and the fuel and moderator coefficients of temperature. Concerning the control rods studies, we investigated the reactivity worth, the changes in the neutron flux profile due to a partial insertion, the influence of modifying the radius of the BISO particles kernel and the {beta} {sub eff}, at the beginning of the operation.

  5. The burnable poisons utilization for fissile enriched CANDU fuel bundle

    Energy Technology Data Exchange (ETDEWEB)

    Serghiuta, D; Nainer, O [Team 3 Solutions, Don Mills, ON (Canada)

    1996-12-31

    Utilization of burnable poison for the fissile enriched fueled CANDU 6 Mk1 core is investigated. The main incentives for this analysis are the reduction of void reactivity effects, the maximization of the fissile content of fresh fuel bundles, and the achievement of better power shape control, in order to preserve the power envelope of the standard 37 rod fuel bundle. The latter allows also the preservation of construction parameters of the standard core (for example: number and location of reactivity devices). It also permits the use of regular shift fueling schemes. The paper makes analyses of MOX weapons-grade plutonium and 1.2% SEU fueled CANDU 6 Mk 1 cores. (author). 6 refs., 4 tabs., 10 figs.

  6. Analysis of a possible experimental assessment of a prototype fuel element containing burnable poison in the RA-3 reactor

    International Nuclear Information System (INIS)

    Lerner, Ana Maria; Madariaga, Marcelo

    2002-01-01

    The Argentine RA-3 research reactor (5 MW) is presently operated with LEU fuel by the National Atomic Energy Commission (CNEA). It belongs to the group of nuclear installations controlled, from the radiological and nuclear safety point of view, by the Nuclear Regulatory Authority (ARN). A new type of fuel elements containing burnable absorbers, with similar enrichment as the standard fuel elements but greater fissile contents, has recently been proposed for a new Argentine reactor design (RRR). In this framework the ARN considers interesting, if technically possible, the performance of an experiment in the RA-3 reactor. The experiment might enable, for such fuel element containing burnable poison, the verification of its neutronic behaviour under irradiation as well as a validation of the calculation line by comparison to measured values. It should be desirable that such experiment could reproduce as much as possible those conditions estimated for the RRR reactor, still under design in Argentina, having Silicide fuel elements with burnable poison, in the shape of cadmium wires in their structure. We here analyse a possible experiment consisting in the loading of a prototype fuel element with burnable poison in a normally loaded RA-3 core configuration. It would essentially be a standard RA-3 fuel element, having cadmium wires in its frame. This experiment would enable the verification of the prototype behaviour under irradiation, its operation limits and conditions, and particularly, the reactivity safety margins established in Argentine Standards, both calculated and measured. The main part of the experiment would imply some 200 full power days of operation at 5 MW, which would be drastically reduced if the reactor power is increased to 10 MW, as foreseen. We also show that under the proposed conditions, the experiment would not represent a significant penalty to the reactor normal operation. (author)

  7. Irradiation and corrosion behaviour of cadmium aluminate, a burnable poison for light water reactors

    International Nuclear Information System (INIS)

    Hattenbach, K.; Ahlf, J.; Hilgendorff, W.; Zimmermann, H.U.

    1979-01-01

    In quest of a cadmium containing material for use as burnable poison cadmium aluminate seemed promising. Therefore irradiation and corrosion experiments on specimens of cadmium aluminate in a matrix of aluminia were performed. Irradiation at 575 K and fast fluences up to 10 25 m -2 showed the material to have good radiation resistance and low swelling rates. Cadmium pluminate was resistant to corrosion attack in demineralized water of 575K. (orig.) [de

  8. Applying burnable poison particles to reduce the reactivity swing in high temperature reactors with batch-wise fuel loading

    International Nuclear Information System (INIS)

    Kloosterman, J.L.; Dam, H. van; Hagen, T.H.J.J. van der

    2003-01-01

    Burnup calculations have been performed on a standard HTR fuel pebble with a radius of 3 cm containing 9 g of 8% enriched uranium and burnable poison particles (BPP) made of B 4 C highly enriched in 10 B. The radius of the BPP and the number of particles per fuel pebble have been varied to find the flattest reactivity-to-time curve. It was found that for a k∞ of 1.1, a reactivity swing as low as 2% can be obtained when each fuel pebble contains about 1070 BPP with a radius of 75 μm. For coated BPP that consist of a graphite kernel with a radius of 300 μm covered with a B 4 C burnable poison layer, a similar value for the reactivity swing can be obtained. Cylindrical particles seem to perform worse. In general, the modification of the geometry of BPP is an effective means to tailor the reactivity curve of HTRs

  9. Rare earths as burnable poison for extended cycles control in electricity generation reactors

    International Nuclear Information System (INIS)

    Asou, M.

    1995-01-01

    The search of an optimization of the French electronuclear network operations leads to a necessary optimization of the core performances. All the economic studies performed by the utilities had shown that there is a real gain to minimize shut down periods for refueling. So, increasing the cycle length from 12 to 18 months will present a gain of shut down for a three years operation period. The theoretical burnable absorber will be a fuel admixed material bringing the required initial negative reactivity with a burn-up kinetic well suited to the fuel and allowing the lowest residual penalty as possible. The residual penalty us defined in this case by the non complete burn up of the poison, by the low of fissile material and by the accumulate of residual isotopes or nuclides. Because of the well known use of gadolinium as burnable absorber for BWR's and PWR's operations, the search for the best compromise to optimize all the above stress is pointed towards the rare earths. In the nuclides family, considering criteria such as cross sections, natural abundance and availability only five nuclides can play the role as burnable absorbers, namely: gadolinium, samarium, dysprosium, europium and erbium. The study presented here will show that only gadolinium and erbium will be considered to control the reactivity of the PWR's. (author). 58 refs., 65 figs., 47 tabs

  10. Burnable poisons in the light water reactor design, microburnup experiments and calculations. Part of a coordinated programme on burnup calculations and experiments for thermal reactors

    International Nuclear Information System (INIS)

    Penndorf, K.

    1976-04-01

    Investigations on Research Agreement N 1519/CF (1.8.1974 - 31.7.1975) entitled ''Burnable poisons in light water reactor design, microburnup experiments and calculations'' were carried out in the frame of the IAEA's coordinated research programme on ''Burn-up calculation and experiments for thermal reactors''. The theoretical and experimental work on application of solid burnable poison used for reduction of the amount of boric acid necessary to control of PWR or to lower the number of control rods needed in a BWR. Solid burnable poisons are needed in present PWR designs for the reduction of the boron acid concentration in order to prevent positive coefficients of reactivity. The special operational conditions of a ship reactor lead to the application of this kind of poison for compensation of almost all burnup reactivity. This strengthens the necessity of a very accurate and many dimensional calculations because an appropriate binding of reactivity has to be kept over the whole cycle time. Several burnup experiments had been run in the 15 MW material test reactor FRG-II. The following devices have been irradiated: poison pins within and without PWR fuel pin lattice segments and fuel pins containing pellets with a poison core. Measurements of reactivity, fluence, fission product concentration have been performed. Methods applied were γ-scanning and neutron pulse, radiography and transmission measurement techniques. Evaluation of the experiments was done by one and two dimensional Ssub(N) transport burnup calculations. In parallel a collision probability transport burnup code for current PWR design work is being developed, the main feature of which is economy in manpower and computer time

  11. An evaluation of nuclear design characteristics of duplex burnable poison rods for extended cycle core

    International Nuclear Information System (INIS)

    Lee, D. J.; Kim, M. H.; Song, K. W.

    2003-01-01

    Nuclear design characteristics of duplex burnable poison rod were evaluated for three integral type burnable absorbers; Gadolinia, Erbia and IFBA. Inter-comparison was done for both 12 and 24 month cycle for Korean Standard Nuclear Plant. Fuel assemblies with duplex BP was designed to the equivalent assembly with 8 and 16 gadolinia BP 2 . Duplex BP is composed of inner region of natural U-Gd 2 O 3 , and outer shell of, UO 2 -Er2O 3 . In order to evaluate the duplex BP, assemblies with erbia and IFBA were compared with alternative options. A sensitivity studies were performed to the size of region, compositions and location of duplex BPs. It was shown that duplex BP gave favorable k-infinite curve to burnup, but IFBA provided the least residual reactivity penalty as EOC. Erbia was good for more negative MTCs. IFBA and erbia had better neutronic performance than gadolinia od duplex BP in the aspect of pin power peaking

  12. Burnable neutron absorbers

    International Nuclear Information System (INIS)

    Radford, K.C.; Carlson, W.G.

    1985-01-01

    This patent deals with the fabrication of pellets for neutron absorber rods. Such a pellet includes a matrix of a refractory material which may be aluminum or zirconium oxide, and a burnable poison distributed throughout the matrix. The neutron absorber material may consist of one or more elements or compounds of the metals boron, gadolinium, samarium, cadmium, europium, hafnium, dysprosium and indium. The method of fabricating pellets of these materials outlined in this patent is designed to produce pores or voids in the pellets that can be used to take up the expansion of the burnable poison and to absorb the helium gas generated. In the practice of this invention a slurry of Al 2 O 3 is produced. A hard binder is added and the slurry and binder are spray dried. This powder is mixed with dry B 4 C powder, forming a homogeneous mixture. This mixture is pressed into green tubes which are then sintered. During sintering the binder volatilizes leaving a ceramic with nearly spherical high-density regions of

  13. A new fast neutron collar for safeguards inspection measurements of fresh low enriched uranium fuel assemblies containing burnable poison rods

    Energy Technology Data Exchange (ETDEWEB)

    Evans, Louise G., E-mail: evanslg@ornl.gov [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Swinhoe, Martyn T.; Menlove, Howard O. [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Schwalbach, Peter; Baere, Paul De [European Commission, Euratom Safeguards Office (Luxembourg); Browne, Michael C. [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)

    2013-11-21

    Safeguards inspection measurements must be performed in a timely manner in order to detect the diversion of significant quantities of nuclear material. A shorter measurement time can increase the number of items that a nuclear safeguards inspector can reliably measure during a period of access to a nuclear facility. In turn, this improves the reliability of the acquired statistical sample, which is used to inform decisions regarding compliance. Safeguards inspection measurements should also maintain independence from facility operator declarations. Existing neutron collars employ thermal neutron interrogation for safeguards inspection measurements of fresh fuel assemblies. A new fast neutron collar has been developed for safeguards inspection measurements of fresh low-enriched uranium (LEU) fuel assemblies containing gadolinia (Gd{sub 2}O{sub 3}) burnable poison rods. The Euratom Fast Collar (EFC) was designed with high neutron detection efficiency to make a fast (Cd) mode measurement viable whilst meeting the high counting precision and short assay time requirements of the Euratom safeguards inspectorate. A fast mode measurement reduces the instrument sensitivity to burnable poison rod content and therefore reduces the applied poison correction, consequently reducing the dependence on the operator declaration of the poison content within an assembly. The EFC non-destructive assay (NDA) of typical modern European pressurized water reactor (PWR) fresh fuel assembly designs have been simulated using Monte Carlo N-particle extended transport code (MCNPX) simulations. Simulations predict that the EFC can achieve 2% relative statistical uncertainty on the doubles neutron counting rate for a fast mode measurement in an assay time of 600 s (10 min) with the available {sup 241}AmLi (α,n) interrogation source strength of 5.7×10{sup 4} s{sup −1}. Furthermore, the calibration range of the new collar has been extended to verify {sup 235}U content in variable PWR fuel

  14. A new fast neutron collar for safeguards inspection measurements of fresh low enriched uranium fuel assemblies containing burnable poison rods

    International Nuclear Information System (INIS)

    Evans, Louise G.; Swinhoe, Martyn T.; Menlove, Howard O.; Schwalbach, Peter; Baere, Paul De; Browne, Michael C.

    2013-01-01

    Safeguards inspection measurements must be performed in a timely manner in order to detect the diversion of significant quantities of nuclear material. A shorter measurement time can increase the number of items that a nuclear safeguards inspector can reliably measure during a period of access to a nuclear facility. In turn, this improves the reliability of the acquired statistical sample, which is used to inform decisions regarding compliance. Safeguards inspection measurements should also maintain independence from facility operator declarations. Existing neutron collars employ thermal neutron interrogation for safeguards inspection measurements of fresh fuel assemblies. A new fast neutron collar has been developed for safeguards inspection measurements of fresh low-enriched uranium (LEU) fuel assemblies containing gadolinia (Gd 2 O 3 ) burnable poison rods. The Euratom Fast Collar (EFC) was designed with high neutron detection efficiency to make a fast (Cd) mode measurement viable whilst meeting the high counting precision and short assay time requirements of the Euratom safeguards inspectorate. A fast mode measurement reduces the instrument sensitivity to burnable poison rod content and therefore reduces the applied poison correction, consequently reducing the dependence on the operator declaration of the poison content within an assembly. The EFC non-destructive assay (NDA) of typical modern European pressurized water reactor (PWR) fresh fuel assembly designs have been simulated using Monte Carlo N-particle extended transport code (MCNPX) simulations. Simulations predict that the EFC can achieve 2% relative statistical uncertainty on the doubles neutron counting rate for a fast mode measurement in an assay time of 600 s (10 min) with the available 241 AmLi (α,n) interrogation source strength of 5.7×10 4 s −1 . Furthermore, the calibration range of the new collar has been extended to verify 235 U content in variable PWR fuel designs in the presence of up to

  15. Evaluation of accuracy of Monte Carlo code MVP with VHTRC experiments. Multiplication factor at criticality, burnable poison worth and void worth

    International Nuclear Information System (INIS)

    Nojiri, Naoki; Yamashita, Kiyonobu; Fiujimoto, Nozomu; Nakano, Masaaki , Yamane, Tsuyoshi; Akino, Fujiyoshi.

    1997-11-01

    Experimental data of VHTRC (Very High Temperature Reactor Critical Assembly) were analyzed using Monte Carlo code MVP (general purpose Monte Carlo code of neutron and photon transport calculations based on the continuous energy method). The calculation accuracy of the code was evaluated by the analysis for nuclear characteristics of a HTGR (high temperature gas-cooled reactor). The MVP code can analyze with a detailed three-dimensional core model with a few approximations. The HTGRs have following characteristics from view point of nuclear design : they have burnable poisons, many void holes, namely, the control insertion holes and so on. Taking account of these characteristics, multiplication factor at criticality, burnable poison worth, and void worth were evaluated. The maximum calculation errors were 0.8%Δk, 7%, and 25% respectively, From these results, it can be concluded that the MVP code is able to be applied to the nuclear characteristics analysis of the HTGR like the High Temperature Engineering Test Reactor (HTTR). (author)

  16. Multi level optimization of burnable poison utilization for advanced PWR fuel management

    Science.gov (United States)

    Yilmaz, Serkan

    The objective of this study was to develop an unique methodology and a practical tool for designing burnable poison (BP) pattern for a given PWR core. Two techniques were studied in developing this tool. First, the deterministic technique called Modified Power Shape Forced Diffusion (MPSFD) method followed by a fine tuning algorithm, based on some heuristic rules, was developed to achieve this goal. Second, an efficient and a practical genetic algorithm (GA) tool was developed and applied successfully to Burnable Poisons (BPs) placement optimization problem for a reference Three Mile Island-1 (TMI-1) core. This thesis presents the step by step progress in developing such a tool. The developed deterministic method appeared to perform as expected. The GA technique produced excellent BP designs. It was discovered that the Beginning of Cycle (BOC) Kinf of a BP fuel assembly (FA) design is a good filter to eliminate invalid BP designs created during the optimization process. By eliminating all BP designs having BOC Kinf above a set limit, the computational time was greatly reduced since the evaluation process with reactor physics calculations for an invalid solution is canceled. Moreover, the GA was applied to develop the BP loading pattern to minimize the total Gadolinium (Gd) amount in the core together with the residual binding at End-of-Cycle (EOC) and to keep the maximum peak pin power during core depletion and Soluble boron concentration at BOC both less than their limit values. The number of UO2/Gd2O3 pins and Gd 2O3 concentrations for each fresh fuel location in the core are the decision variables and the total amount of the Gd in the core and maximum peak pin power during core depletion are in the fitness functions. The use of different fitness function definition and forcing the solution movement towards to desired region in the solution space accelerated the GA runs. Special emphasize is given to minimizing the residual binding to increase core lifetime as

  17. Study of burnable poison in the dupic cycle

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Clarysson A.M. da; Almeida, Michel C.B. de; Faria, Rochkhudson B. de; Moreira, Arthur P.C.; Pereira, Claubia, E-mail: clarysson@nuclear.ufmg.br, E-mail: claubia@nuclear.ufmg.br [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Departamento de Engenharia Nuclear

    2017-07-01

    Recent studies confirm the potential of using reprocessed PWR (Pressurized Water Reactor) fuels in the CANDU (Canada Deuterium Uranium) reactor fuel cycle. An important proposal is the 'Direct Use of spent PWR fuel In CANDU' (DUPIC) cycle, where spent fuels from a PWR are packaged into a CANDU fuel bundle with only mechanical reprocessing (cut into pieces) but no chemical reprocessing. The fissile contents of the spent fuel from Pressurized Water Reactor (PWR) are about 1.5 wt%, which is higher than that of the fuel of CANDU. When this reactor is reload with reprocessed fuel, the reactivity of system will increase and this behavior may affect the safety parameters of reactor. To reduce the initial reactivity, Burnable Poison (BP) can be inserted in the fuel bundle of CANDU. In this way, the present paper evaluates the insertion of the different types of BP considering the DUPIC cycle. The following BPs were evaluated: Boron, Cadmium, Dysprosium, Erbium, Europium, Gadolinium, Hafnium and Samarium. The goal is to verify the neutronic behavior of the fuel bundle at steady state and during the reactor burnup. The SCALE 6.0 (Standardized Computer Analyses for Licensing Evaluation) code was employed to model a standard CANDU-6 fuel element. (author)

  18. Application of boron and gadolinium burnable poison particles in UO2 and PUO2 fuels in HTRs

    International Nuclear Information System (INIS)

    Kloosterman, J.L.

    2003-01-01

    Burnup calculations have been performed on a standard HTR fuel pebble (fuel zone with radius of 2.5 cm surrounded with a 0.5 cm thick graphite layer) and burnable poison particles (BPPs) containing B 4 C made of pure 10 B or containing Gd 2 O 3 made of natural Gd. Two types of fuel were considered: UO 2 fuel made of 8% enriched uranium and PuO 2 fuel made of plutonium from LWR spent fuel. The radius of the BPP and the number of particles per fuel pebble were varied to find the flattest reactivity-to-time curve. For the UO 2 fuel, the reactivity swing is lowest (around 2%) for BPPs made of B 4 C with radius of 75 μm. In this case around 1070 BPPs per fuel pebble are needed. For the PuO 2 fuel to get a reactivity swing below 4%, the optimal radius of the BPP is the same, but the number of particles per fuel pebble should be around 1600. The optimal radius of the Gd 2 O 3 particles in the UO 2 fuel is about 10 times that of the B 4 C particles. The reactivity swing is around 3% when each fuel pebble contains only 9 BPPs with radius of 840 μm. The results of the Gd particles illustrate nicely the usage of black burnable poison particles introduced by Van Dam [Ann. Nuclear Energy 27 (2000) 733

  19. Feasibility of using gadolinium as a burnable poison in PWR cores. Final report

    International Nuclear Information System (INIS)

    Rothleder, B.M.

    1981-02-01

    As an alternative to the use of lumped burnable absorbers in PWR cores, distributed burnable absorbers are being considered for generic application. These burnable absorbers take the form of Gd 2 O 3 mixed with UO 2 in selected fuel rods (as is currently done in BWR cores). The work discussed herein concerns a three-dimensional feasibility study of the use of such distributed burnable absorbers in PWR cores. This study of distributed burnable absorbers was performed for the first cycle of a typical current design PWR using the following steps: analysis of a generic reference core design; determination of gadolinium assembly designs; determination of a generic gadolinium core design; evaluation of feasibility by examining selected parameters; and redesign of the generic gadolinium core, using axial zoning

  20. Optimization method of rod-type burnable poisons for nuclear designs of HTGRs

    International Nuclear Information System (INIS)

    Yamashita, Kiyonobu

    1994-01-01

    In block-type HTGRs, control rod insertion depths into cores had to be maintained as small as possible at full power operations, to avoid a fuel temperature rise. Thus, specifications (poison atom density (N BP ) and radius (r)) of rod-type burnable poisons (BPs) had to be optimized so that the effective multiplication factor (k eff ) would be constant at a minimum value throughout a planned burnup period. However, the optimization had been a time-consuming work until now since survey calculations had to be done for most possible combinations of N BP and r. To solve this problem, I have found a optimization method consisting of two steps. In the first step, approximation formulas describing a time-dependent relation among effective absorption cross sections (Σ aBP ), N BP and r are used to select promising combinations of N BP and r beforehand. In the second step, the best combination of N BP and r is determined by a comparison between Σ aBP of each promising combination and expected one. The number of survey calculations was reduced to about 1/10 by the optimization method. The change in k eff for 600 burnup days was reduced to 2%Δk by the method. Hence, it was made possible to operate reactors practically without inserting the control rods into cores. (author)

  1. Hot channel calculation methodologies in case of Gd burnable poison

    International Nuclear Information System (INIS)

    Panka, I.; Kereszturi, A.

    2008-01-01

    The final step in the safety analysis is the investigation of the fulfilment of the acceptance criteria using hot channel calculations. Recently, there has been under way at Paks NPP to introduce a new, higher enriched (4.2 %) fuel type containing Gd burnable poison. To do that, for some transients the DBA analyses must be repeated and last year, as one of the first steps in this process, it was needed to review the hot channel calculation methodologies used in the analyses. The goal of the paper is to summarize some aspects of the hot channel calculation methodologies using different lattice pitches and different fuel types (Gd or non Gd and different enrichments). Mainly, three topics are discussed. First, the influence of the radial power distribution (and other burnup dependent parameters) inside the fuel pin are investigated, and then we discuss the problem of the selection of the appropriate 'frame parameter' in connection with the initial power level at the initial stationary state of DBA transients. Finally, we are trying to answer the question: is it possible to build up a conservative single closed sub-channel approach against multi channel approach?(Authors)

  2. Study of burnable poisons and gadolinium qualification in light water reactors

    International Nuclear Information System (INIS)

    Nasr, Mohamed.

    1981-09-01

    The aim of this work is to develop a calculation procedure for analyzing light water moderated reactors utilizing gadolinium as a burnable poison. The main points of this work can be summarized as follows: the available cross section data of gadolinium were analysed and corrected whenever it was necessary. The processes which include required precautions for obtaining multigroup cross sections were defined; an exhaustive study of the assumptions used in multicell calculation methods allowed the definition of option to be used for obtaining good results without excessive calculation cost. This study was followed by the interpretation of experimental results; when gadolinium is used in grain structure, a problem of double heterogeneity is encountered. A new calculation method was developed for such situations. Its validity was confirmed by a comparison with the Monte Carlo method; the problems encountered in performing a study of burn up of fuel elements containing gadolinium were analysed and the necessary precautions were established. The effect of the initial charge and geometrical form of the gadolinium and the behavior of lattices during the burn up were examined [fr

  3. Safe core management with burnable absorbers in WWERs

    International Nuclear Information System (INIS)

    1996-01-01

    The objective of this TECDOC is to present state of the art information on burnable poisoned fuel during the CRP. It is based on experimental evidence and on the utilization of theoretical models and will help achieve improvements in safety and economy of LWR cores with hexagonal geometries. 149 refs, figs and tabs

  4. Rare earths as burnable poison for extended cycles control in electricity generation reactors; Etude des terres rares en tant que poison consommable pour le controle des cycles allonges pour les reacteurs electrogenes

    Energy Technology Data Exchange (ETDEWEB)

    Asou, M

    1995-05-12

    The search of an optimization of the French electronuclear network operations leads to a necessary optimization of the core performances. All the economic studies performed by the utilities had shown that there is a real gain to minimize shut down periods for refueling. So, increasing the cycle length from 12 to 18 months will present a gain of shut down for a three years operation period. The theoretical burnable absorber will be a fuel admixed material bringing the required initial negative reactivity with a burn-up kinetic well suited to the fuel and allowing the lowest residual penalty as possible. The residual penalty us defined in this case by the non complete burn up of the poison, by the low of fissile material and by the accumulate of residual isotopes or nuclides. Because of the well known use of gadolinium as burnable absorber for BWR`s and PWR`s operations, the search for the best compromise to optimize all the above stress is pointed towards the rare earths. In the nuclides family, considering criteria such as cross sections, natural abundance and availability only five nuclides can play the role as burnable absorbers, namely: gadolinium, samarium, dysprosium, europium and erbium. The study presented here will show that only gadolinium and erbium will be considered to control the reactivity of the PWR`s. (author). 58 refs., 65 figs., 47 tabs.

  5. Depletion of gadolinium burnable poison in a PWR assembly with high burnup fuel

    Energy Technology Data Exchange (ETDEWEB)

    Refeat, Riham Mahmoud [Nuclear and Radiological Regulatory Authority (NRRA), Cairo (Egypt). Safety Engineering Dept.

    2015-12-15

    A tendency to increase the discharge burnup of nuclear fuel for Advanced Pressurized Water Reactors (PWR) has been a characteristic of its operation for many years. It will be able to burn at very high burnup of about 70 GWd/t with UO{sub 2} fuels. The U-235 enrichment must be higher than 5 %, which leads to the necessity of using an extremely efficient burnable poison like Gadolinium oxide. Using gadolinium isotope is significant due to its particular depletion behavior (''Onion-Skin'' effect). In this paper, the MCNPX2.7 code is used to calculate the important neutronic parameters of the next generation fuels of PWR. K-infinity, local peaking factor and fission rate distributions are calculated for a PWR assembly which burn at very high burnup reaching 70 GWd/t. The calculations are performed using the recently released evaluated Gadolinium cross section data. The results obtained are close to those of a LWR next generation fuel benchmark problem. This demonstrates that the calculation scheme used is able to accurately model a PWR assembly that operates at high burnup values.

  6. Substitution of the soluble boron reactivity control system of a pressurized water reactor by gadolinium burnable poisons

    International Nuclear Information System (INIS)

    Galperin, A.; Segev, M.; Radkowsky, A.

    1986-01-01

    The results are presented of a research project that is aimed at designing a gadolinium burnable poison (BP) system for complete reactivity control of a pressurized water reactor (PWR) core during the ''equilibrium'' cycle, resulting in the elimination of the soluble boron system, which represents a considerable saving in both capital and operating costs. A flat and strong negative moderator temperature coefficient is assured for a poison-free moderator. The design analysis of a core, heavily loaded with gadolinium BP rods, was based on a BGUCORE neutronic package and cluster model of a fuel assembly. The project objective was achieved by a novel lumped BP rod, designed as an annulus of gadolinium, clad by zirconium, and inserted into vacant guide thimbles of fresh-fuel assemblies. Specific combinations were found for the inner/outer radii of the poison ring, gadolinium densities, and number of rods per assembly, resulting in an almost flat criticality curve during the cycle. A reactivity swing of ≅1% ΔK can be easily controlled by an existing system of control rods. Comparison of the fuel cycle length of a gadolinium-controlled core with that of the reference, soluble, boron-controlled core indicated that there is no penalty due to residual poison at end of life. Unique guidelines for the fuel loading strategy were applied to find a practical fuel-shuffling scheme by which the design and operational constraints of a typical PWR core of current design were satisfied. Several problems should be solved for a practical implementation of the presented design relative to operational and safety requirements of the existing control rod system. Adequate movement of the regulating rods should be determined and shutdown margins of the safety rods should be ascertained. Final judgment of the feasibility of the concept may be made following the solution of these and other regulatory-related issues

  7. Gadolinium burnable absorber optimization by the method of conjugate gradients

    International Nuclear Information System (INIS)

    Drumm, C.R.; Lee, J.C.

    1987-01-01

    The optimal axial distribution of gadolinium burnable poison in a pressurized water reactor is determined to yield an improved power distribution. The optimization scheme is based on Pontryagin's maximum principle, with the objective function accounting for a target power distribution. The conjugate gradients optimization method is used to solve the resulting Euler-Lagrange equations iteratively, efficiently handling the high degree of nonlinearity of the problem

  8. Optimizing the use of gadolinium as burnable poison in nuclear fuel: towards a boron free PWR

    International Nuclear Information System (INIS)

    Pieck, D.

    2013-01-01

    Reactivity excess in Nuclear Power Plants is controlled by reactor's active systems: boric acid dilution and control rods. Alternatively, negative reactivity insertion can be made in a passive way using burnable poisons, i.e. neutron absorbers, this is the case of gadolinium (Gd). In the industrial framework of U 235 enrichment increase and boric acid restraint, the goal of this thesis is to optimize the distribution of gadolinium in UO 2 ceramics to obtain a high-performance provision of negative reactivity in Pressurized Water Reactors. In this sense, the work is focus on new gadolinium-rich materials. Thus, U-Gd-O phase diagram was explored in the field of high Gd contents. Two cubic phases were found and characterized: the C1 and C2 phases. With the aim of an industrial application, C1 phase was selected as candidate for Gd addition into UO 2 pellets. The optimal distribution of C1 phase within a nuclear fuel assembly was studied using APOLLO 2.8 neutron transport code. Parametric calculations were performed. These neutronic studies have ends in a successful 'concept of poisoned pellet'. Finally, some prototype pellets following this concept were made in laboratory to proof it feasibility. All the obtained results shows that the proposed concept of a neutro-phage C1-phase coating on UO 2 pellets is a convenient way to reduce reactivity excess within the framework of long irradiation cycles. This concept could be potentially applied in industrial scale. Consequently a patent application process was initiated.(author) [fr

  9. Burnable neutron absorbers

    International Nuclear Information System (INIS)

    Radford, K.C.; Carlson, W.G.

    1985-01-01

    This invention provides ceramic processing including sintering schedules which produce annular pellets containing burnable poisons for use in reactor control rods. Typically the powder includes Al 2 O 3 and from 1 to 50 weight percent B 4 C. The Al 2 O 3 and B 4 C, appropriately sized, are milled in a ball mill with liquid to produce a slurry. The slurry is spray dried to produce small spheres of the mixed powder, which is mixed with adequate organic binder and plasticizer and formed into a hollow green body having the shape of a tube. The green body is sintered to produce a ceramic tube from which the pellets are cut. The tube is sintered to size so that the pellets have the required dimensions. It is an important feature of this invention that the powder is formed into the green body by applying isostatic pressure to the powder

  10. Study and optimization of the composite nuclear fuel with burnable poison UO2/Gd2O3

    International Nuclear Information System (INIS)

    Balestrieri, D.

    1995-09-01

    The studied composite ceramics is a nuclear fuel constituted of a uranium dioxide matrix UO 2 in which big grains (or 'macro-masses') of gadolinium oxide (Gd 2 O 3 ) of 300 ± 100 μm of diameter (mass fraction of 12%) are dispersed. Used as burnable poison (neutron absorbent whose action disappears progressively during the irradiation), gadolinium oxide is the object of a particular attention because some of its properties as the crystal structure, the aptitude to sintering and the thermomechanical behavior have been studied. The aim of this work is to perfect and optimize the process of manufacture of the composite in order to answer to accurate specifications for the density, the shape and the mass fraction of macro-masses. In this framework, it has been necessary to strengthen the Gd 2 O 3 macro-masses by a thermal treatment in order to avoid their deformation during the uniaxial pressing. The influence of this pre-consolidation on the ended microstructure, the aptitude to sintering and the thermal conductivity of the composite have been studied. (O.M.)

  11. Burnable absorber for the PIK reactor

    International Nuclear Information System (INIS)

    Gostev, V.V.; Smolskii, S.L.; Tchmshkyan, D.V.; Zakharov, A.S.; Zvezdkin, V.S.; Konoplev, K.A.

    1998-01-01

    In the reactor PIK design a burnable absorber is not used and the cycle duration is limited by the rods weight. Designed cycle time is two weeks and seams to be not enough for the 100 MW power research reactor equipped by many neutron beams and experimental facilities. Relatively frequent reloading reduces the reactor time on full power and in this way increases the maintenance expenses. In the reactor core fuel elements well mastered by practice are used and its modification was not approved. We try to find the possibilities of installation in the core separate burnable elements to avoid poison of the fuel. It is possible to replace a part of the fuel elements by absorbers, since the fuel elements are relatively small (diameter 5.15mm, uranium 235 content 7.14g) and there are more then 3800 elements in the core. Nevertheless, replacing decreases the fuel burnup and its consumption. In the PIK fuel assembles a little part of the volume is occupied by the dumb elements to create a complete package of the assembles shroud, that is necessary in the hydraulic reasons. In the presented report the assessment of such a replacement is done. As a burnable material Gadolinium was selected. The measurements or the beginning of cycle were performed on the critical facility PIK. The burning calculation was confirmed by measurements on the 18MW reactor WWR-M. The results give the opportunity to twice the cycle duration. The proposed modification of the fuel assembles does not lead to alteration in the other reactor systems, but it touch the burned fuel reprocessing technology. (author)

  12. Burnable neutron absorbers

    International Nuclear Information System (INIS)

    Radford, K.C.; Carlson, W.G.

    1983-01-01

    A neutron-absorber body for use in burnable poison rods in a nuclear reactor. The body is composed of a matrix of Al 2 O 3 containing B 4 C, the neutron absorber. Areas of high density polycrystalline Al 2 O 3 particles are predominantly encircled by pores in some of which there are B 4 C particles. This body is produced by initially spray drying a slurry of A1 2 O 3 powder to which a binder has been added. The powder of agglomerated spheres of the A1 2 O 3 with the binder are dry mixed with B 4 C powder. The mixed powder is formed into a green body by isostatic pressure and the green body is sintered. The sintered body is processed to form the neutron-absorber body. In this case the B 4 C particles are separate from the spheres resulting from the spray drying instead of being embedded in the sphere

  13. Reloading optimization of pressurized water reactor core with burnable absorber fuel

    International Nuclear Information System (INIS)

    Shi Xiuan; Liu Zhihong; Hu Yongming

    2008-01-01

    The reloading optimization problem of PWR with burnable absorber fuel is very difficult, and common optimization algorithms are inefficient and have bad global performance for it. Characteristic statistic algorithm (CSA) is very fit for the problem. In the past, the reloading optimization using CSA has shortcomings of separating the fuel assemblies' loading pattern (LP) optimization from burnable absorber's placement (BP) optimization. In this study, LP and BP were optimized simultaneously using CSA coupled with CYCLE2D, which is a core analysis code. The corresponding reloading coupling optimization software, CSALPBP, was developed. The 10th cycle reloading design of Daya Bay Nuclear Power Plant was optimized using CSALPBP. The results show that CSALPBP has high efficiency and excellent global performance. (authors)

  14. New Small LWR Core Designs using Particle Burnable Poisons for Low Boron Concentration

    International Nuclear Information System (INIS)

    Yoo, Ho Seong; Hwang, Dae Hee; Hong, Ser Gi

    2015-01-01

    The soluble boron has two major important roles in commercial PWR operations : 1) the control of the long-term reactivity to maintain criticality under normal operation, and 2) the shutdown of the reactor under accidents. However, the removal of the soluble boron gives several advantages in SMRs (Small Modular Reactor). These advantages resulted from the elimination of soluble boron include the significant simplification of nuclear power plant through the removal of pipes, pumps, and purification systems. Also, the use of soluble boron mitigates corrosion problems on the primary coolant loop. Furthermore, the soluble boron-free operation can remove an inadvertent boron dilution accident (BDA) which can lead to a significant insertion of positive reactivity. From the viewpoint of core physics, the removal of soluble boron or reduction of soluble boron concentration makes the moderator temperature coefficient (MTC) more negative. From the core design studies using new fuel assemblies, it is shown that the cores have very low critical soluble boron concentrations less than 500ppm, low peaking factors within the design targets, strong negative MTCs over cycles, and large enough shutdown margins both at BOC and EOC. However, the present cores have relatively low average discharge burnups of ∼ 30MWD/kg leading to low fuel economy because the cores use lots of non-fuel burnable poison rods to achieve very low critical boron concentrations. So, in the future, we will perform the trade-off study between the fuel discharge burnup and the boron concentrations by changing fuel assembly design and the core loading pattern

  15. New Small LWR Core Designs using Particle Burnable Poisons for Low Boron Concentration

    Energy Technology Data Exchange (ETDEWEB)

    Yoo, Ho Seong; Hwang, Dae Hee; Hong, Ser Gi [Kyung Hee University, Yongin (Korea, Republic of)

    2015-05-15

    The soluble boron has two major important roles in commercial PWR operations : 1) the control of the long-term reactivity to maintain criticality under normal operation, and 2) the shutdown of the reactor under accidents. However, the removal of the soluble boron gives several advantages in SMRs (Small Modular Reactor). These advantages resulted from the elimination of soluble boron include the significant simplification of nuclear power plant through the removal of pipes, pumps, and purification systems. Also, the use of soluble boron mitigates corrosion problems on the primary coolant loop. Furthermore, the soluble boron-free operation can remove an inadvertent boron dilution accident (BDA) which can lead to a significant insertion of positive reactivity. From the viewpoint of core physics, the removal of soluble boron or reduction of soluble boron concentration makes the moderator temperature coefficient (MTC) more negative. From the core design studies using new fuel assemblies, it is shown that the cores have very low critical soluble boron concentrations less than 500ppm, low peaking factors within the design targets, strong negative MTCs over cycles, and large enough shutdown margins both at BOC and EOC. However, the present cores have relatively low average discharge burnups of ∼ 30MWD/kg leading to low fuel economy because the cores use lots of non-fuel burnable poison rods to achieve very low critical boron concentrations. So, in the future, we will perform the trade-off study between the fuel discharge burnup and the boron concentrations by changing fuel assembly design and the core loading pattern.

  16. PWR burnable absorber evaluation

    International Nuclear Information System (INIS)

    Cacciapouti, R.J.; Weader, R.J.; Malone, J.P.

    1995-01-01

    The purpose of the study was to evaluate the relative neurotic efficiency and fuel cycle cost benefits of PWR burnable absorbers. Establishment of reference low-leakage equilibrium in-core fuel management plans for 12-, 18- and 24-month cycles. Review of the fuel management impact of the integral fuel burnable absorber (IFBA), erbium and gadolinium. Calculation of the U 3 O 8 , UF 6 , SWU, fuel fabrication, and burnable absorber requirements for the defined fuel management plans. Estimation of fuel cycle costs of each fuel management plan at spot market and long-term market fuel prices. Estimation of the comparative savings of the different burnable absorbers in dollar equivalent per kgU of fabricated fuel. (author)

  17. Processing of poison rods with a view to disposal

    International Nuclear Information System (INIS)

    Bichet, R.; Charamathieu, A.; Lasseur, C.; Golicheff, I.; Pouteaux, M.

    1979-01-01

    In the core of the French 900 and 1300 MW reactors, a certain number of rods have to be processed as wastes, particularly the burnable poison rods used during reactor start-up (900 MW: 68 rods; 1300 MW: 96 rods). Several solutions are possible: cutting and conditionning in reactor pool; transfer of the poison rods to a cutting and conditionning facility; transfer of the poison rods and fuel assemblies to a storage area where they are cutted and stored. Each of these solutions are studied, the advantages and disadvantages being presented

  18. Fuel assembly and reactor core

    International Nuclear Information System (INIS)

    Ishibashi, Yoko; Aoyama, Motoo; Oyama, Jun-ichi; Masumi, Ryoji; Soneda, Hideo.

    1994-01-01

    A fuel assembly comprises a plurality of fuel rods filled with nuclear fuels, a plurality of burnable poison rods incorporated with burnable poisons, and water rods which can vary the height in the tube depending on the coolant flow rate flown into the assembly. The amount of entire burnable poisons of the burnable poison-containing rods in adjacent with the water rods is smaller than the amount of entire burnable poisons in the burnable poison containing rods not in adjacent with the water rods. Then the average concentration of burnable poisons in the axial upper half region is made smaller than the average concentration of the burnable poisons at the axial lower half region. Further, a burnable poison concentration at the upper half region of at least one of burnable poison-containing rods in adjacent with the water rods is made lower than the burnable poison concentration in the lower half region. Since this can fasten the combustion of the burnable poisons, a fuel assembly having good fuel economy can be attained. (I.N.)

  19. Investigation of the burn-up behavior of boron poison rods, placed in a fuel assembly of a pressurized water reactor

    International Nuclear Information System (INIS)

    Arnold, C.; Lutz, D.C.

    1979-09-01

    The excess reactivity of a pressurized water reactor is compensated by boron, disolved in the moderator. In addition during the first cycle boron poison rods are placed in fuel assemblies without control rods. The burn-up behavior of a poison rod in a Biblis B fuel assembly is analysed in the present paper. Multigroup spectrum calculations were performed. The influence of critical boron concentration depending from burn-up, the changes of fuel concentration and the concentration of burnable poison were taken into consideration. Furthermore the built-up of rapidly saturating fisson products 135 Xe and 149 Sm was considered. The interaction of these effects are discussed. Spatial influences are emphasized most. Finally two group cross sections were calculated. The results are compared with calculations for a fuel assembly of the same type without burnable poison rods. (orig.) [de

  20. Modification of Japanese first nuclear ship reactor for a regional energy supply system using gadolinia as a burnable poison

    International Nuclear Information System (INIS)

    Sato, Kotaro; Shimazu, Yoichiro; Narabayashi, Tadashi; Tsuji, Masashi

    2009-01-01

    In our laboratory, a small regional energy supply system which uses a small nuclear reactor has been studied for a long time. This system could supply not only heat but also electricity. Heat could be used for hot-water supply, a heating system of a house, melting snow and so on. In this point, this system seems to be useful for the places like northern part of Japan where it snows in winter. This reactor is based on Nuclear Ship Mutsu which was developed as the first nuclear ship of Japan about 40 years ago. It has several advantages for a small reactor. For example, its moderator temperature coefficient is always to be deeply negative because boric acid solution is not used in moderator and coolant. This can lead to a self-controlled operation without control rod maneuvering for load change. But some modifications have been performed in order to satisfy requirements such as (1) longer core life without refueling and reshuffling, (2) reactivity adjustment for load change without control rods or soluble boron, (3) simpler operations for load changes and (4) ultimate safety with sufficient passive capability. In our previous study, we confirmed the core based on Mutsu core had longer core life (about 10 years) using high uranium enrichment fuel (more than 5wt%) and current 17x17 fuel assemblies. We also confirmed excess reactivity during the cycle could be suppressed using combination of erbium oxide (Er 2 O 3 ) and gadolinium oxide (Gd 2 O 3 ) as burnable poisons. Er 2 O 3 has advantages such that criticality safety can be kept even if uranium enrichment is more than 5wt% and burnup characteristics of the core can be gradual. But at this time there are 2 problems to apply for the core using Er 2 O 3 in Japan. First problem is that more than 5wt% enrichment fuel is not yet accepted in Japan. Second problem is that there are no experiences of using Er 2 O 3 in commercial reactors in Japan. Considering these problems, we have to modify the design of the core, using

  1. Implementation of a Gadolinium Burnable Absorber in the Carbide LEU-NTR

    International Nuclear Information System (INIS)

    Venneria, Paolo; Kim, Yonghee

    2015-01-01

    Among the most crucial are the rapid reactivity depletion during full-power operation and the positive reactivity insertion during the full-submersion criticality accident. In previous work, it has been suggested that both challenges can be mitigated through the successful implementation of a burnable absorber in the active core. Of the poisons previously surveyed, one of the most promising is Gadolinium in the form of Gadolina (Gd2O4). This paper explores the possibility of different methods by which the Gadolinia can be implemented in the core and makes a preliminary study of its effect on the full submersion criticality accident and the reactivity depletion during operation. The application of a Gadolinium neutron absorber in the active core region of the LEU-NTR has been shown to be neutronically feasible. It can be introduced into the core in various locations without resulting in core performance loss. The utility of the poison in terms of mitigating the full-submersion reactivity accident and the rapid change in reactivity during full-power operation have been preliminarily shown and the first steps towards eventual implementation made. Future work will consist of determining the maximum poison content in the core and tailoring the self-shielding effect in order to determine a specific Gd depletion rate

  2. Analysis of burnable poison in Ford Nuclear Reactor fuel to extend fuel lifetime. Final report, August 1, 1994--September 29, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Burn, R.R.; Lee, J.C.

    1996-12-01

    The objective of the project was to establish the feasibility of extending the lifetime of fuel elements for the Ford Nuclear Reactor (FNR) by replacing current aluminide fuel with silicide fuel comprising a heavier uranium loading but with the same fissile enrichment of 19.5 wt% {sup 235}U. The project has focused on fuel designs where burnable absorbers, in the form of B{sub 4}C, are admixed with uranium silicide in fuel plates so that increases in the control reactivity requirements and peak power density, due to the heavier fuel loading, may be minimized. The authors have developed equilibrium cycle models simulating current full-size aluminide core configurations with 43 {approximately} 45 fuel elements. Adequacy of the overall equilibrium cycle approach has been verified through comparison with recent FNR experience in spent fuel discharge rates and simulation of reactor physics characteristics for two representative cycles. Fuel cycle studies have been performed to compare equilibrium cycle characteristics of silicide fuel designs, including burnable absorbers, with current aluminide fuel. These equilibrium cycle studies have established the feasibility of doubling the fuel element lifetime, with minimal perturbations to the control reactivity requirements and peak power density, by judicious additions of burnable absorbers to silicide fuel. Further study will be required to investigate a more practical silicide fuel design, which incorporates burnable absorbers in side plates of each fuel element rather than uniformly mixes them in fuel plates.

  3. Fuel assembly and reactor core

    International Nuclear Information System (INIS)

    Moriwaki, Masanao; Aoyama, Motoo; Masumi, Ryoji; Ishibashi, Yoko.

    1995-01-01

    A fuel assembly comprises a plurality of fuel rods filled with nuclear fuels, a plurality of burnable poison-incorporated fuel rods and a spectral shift-type water rod. As the burnable poison for the burnable poison-incorporated fuel rod, a plurality of burnable poison elements each having a different neutron absorption cross section are used. A burnable poison element such as boron having a relatively small neutron absorbing cross section is disposed more in the upper half region than the lower half region of the burnable poison-incorporated fuel rods. In addition, a burnable poison element such as gadolinium having a relatively large neutron absorbing cross section is disposed more in the lower half-region than the upper half region thereof. This can flatten the power distribution in the vertical direction of the fuel assembly and the power distribution in the horizontal direction at the final stage of the operation cycle. (I.N.)

  4. Fuel assembly

    International Nuclear Information System (INIS)

    Ishibashi, Yoko; Aoyama, Motoo; Oyama, Jun-ichi.

    1995-01-01

    Burnable poison-incorporating fuel rods of a first group are disposed in a region in adjacent with a water rod having a large diameter (neutron moderator rod) disposed to the central portion of a fuel assembly. Burnable poison-incorporating fuel rods of a second group are disposed to a region other than peripheral zone in adjacent with a channel box and corners positioned at an inner zone, in adjacent with the channel box. The average concentration of burnable poisons of the burnable poison-incorporating fuel rods of the first group is made greater than that of the second group. With such a constitution, when the burnable poisons of the first group are burnt out, the burnable poisons of the second group are also burnt out at the same time. Accordingly, an amount of burnable poisons left unburnt at the final stage of the operation cycle is reduced, to improve the reactivity. This can improve the economical property. (I.N.)

  5. Generalized pin factor methodology for LWR reload cores with discrete burnable absorbers

    International Nuclear Information System (INIS)

    Hah, C.J.; Hideki Matsumoto; Toshikazu Ida; Lee, C.; Chao, Y.A.

    2005-01-01

    Discrete burnable absorbers are used to suppress excess reactivity as well as peak pin power in an assembly. After the burn-out of absorption material, discrete burnable absorbers are usually removed from assembly guide tubes for the next cycle. For that case, the pin factors with discrete burnable absorbers cannot be used since the assembly configuration is physically changed. The pin factors without discrete burnable absorbers also have noticeable deviation from the actual case because they do not take into account the history effect due to the residence of discrete burnable absorbers for the previous cycle. In this paper, the generalized pin factor (GPF) method is developed to accurately predict pin powers by considering the history effect. The method uses a second-order polynomial function to approximate the history effect which builds up during the residence of burnable absorber material and employs a linear approximation to simulate the decay of the history effect after discrete burnable absorbers are removed. The verification results from Westinghouse Vantage- 5H assemblies with WABAs showed that pin power errors were significantly reduced by using the GPF. (authors)

  6. Fuel assembly for use in BWR type reactor

    International Nuclear Information System (INIS)

    Inaba, Yuzo.

    1988-01-01

    Purpose: To attain the reduction of neutron irradiation amount to control rods by the improvement in the reactor shutdown margin and the improvement of the control rod worth, by enhancing the arrangement of burnable poisons. Constitution: The number of burnable poison-incorporated fuel rods present in the outer two rows along the sides in adjacent with a control rod among the square lattice arrangement in a fuel assembly is decreased to less than 1/4 for that of total burnable poison-incorporated fuel rods, while the remaining burnable posion-incorporated fuel rods are arranged in the region other than above (that is, those regions not nearer to the control rod). Thus, even if a sufficient number of burnable poison to prolong the controlling effect for the reactivity with the burnable contents as the fuel assembly are disposed, only the burnable poison -incorporated fuel rods by the number less than 1/4 for that of the total burnable poison-incorporated fuel rods are present near the control rod of the fuel assembly. Accordingly, the control rod worth at the initial stage of the burning is increased at both high and normal temperatures. (Kawakami, Y.)

  7. Fuel assemblies

    International Nuclear Information System (INIS)

    Yoshioka, Ritsuo.

    1983-01-01

    Purpose: To improve the operation performance of a BWR type reactor by improving the distribution of the uranium enrichment and the incorporation amount of burnable poisons in fuel assemblies. Constitution: The average enrichment of uranium 235 is increased in the upper portion as compared with that in the lower portion, while the incorporation amount of burnable poisons is increased in an upper portion as compared with that in the lower portion. The difference in the incorporation amount of the burnable poisons between the upper and lower portions is attained by charging two kinds of fuel rods; the ones incorporated with the burnable poisons over the entire length and the others incorporated with the burnable poisons only in the upper portions. (Seki, T.)

  8. Fuel assembly

    International Nuclear Information System (INIS)

    Wataumi, Kazutoshi; Tajiri, Hiroshi.

    1992-01-01

    In a fuel assembly of a BWR type reactor, a pellet to be loaded comprises an external layer of fissile materials containing burnable poisons and an internal layer of fissile materials not containing burnable poison. For example, there is provided a dual type pellet comprising an external layer made of UO 2 incorporated with Gd 2 O 3 at a predetermined concentration as the burnable poisons and an internal layer made of UO 2 not containing Gd 2 O 3 . The amount of the burnable poisons required for predetermined places is controlled by the thickness of the ring of the external layer. This can dissipate an unnecessary poisoning effect at the final stage of the combustion cycle. Further, since only one or a few kinds of powder mixture of the burnable poisons and the fissile materials is necessary, production and product control can be facilitated. (I.N.)

  9. Effects of Burnable Absorbers on PWR Spent Nuclear Fuel

    International Nuclear Information System (INIS)

    O'Leary, P.M.; Pitts, M.L.

    2000-01-01

    Burnup credit is an ongoing issue in designing and licensing transportation and storage casks for spent nuclear fuel (SNF). To address this issue, in July 1999, the U.S. Nuclear Regulatory Commission (NRC), Spent Fuel Project Office, issued Interim Staff Guidance-8 (ISG-8), Revision 1 allowing limited burnup credit for pressurized water reactor (PWR) spent nuclear fuel (SNF) to be used in transport and storage casks. However, one of the key limitations for a licensing basis analysis as stipulated in ISG-8, Revision 1 is that ''burnup credit is restricted to intact fuel assemblies that have not used burnable absorbers''. Because many PWR fuel designs have incorporated burnable-absorber rods for more than twenty years, this restriction places an unnecessary burden on the commercial nuclear power industry. This paper summarizes the effects of in-reactor irradiation on the isotopic inventory of PWR fuels containing different types of integral burnable absorbers (BAs). The work presented is illustrative and intended to represent typical magnitudes of the reactivity effects from depleting PWR fuel with different types of burnable absorbers

  10. Fuel assembly

    International Nuclear Information System (INIS)

    Watanabe, Shoichi; Hirano, Yasushi.

    1998-01-01

    A one-half or more of entire fuel rods in a fuel assembly comprises MOX fuel rods containing less than 1wt% of burnable poisons, and at least a portion of the burnable poisons comprises gadolinium. Then, surplus reactivity at an initial stage of operation cycle is controlled to eliminate burnable poisons remained unburnt at a final stage, as well as increase thermal reactivity. In addition, the content of fission plutonium is determined to greater than the content of uranium 235, and fuel rods at corner portions are made not to incorporate burnable poisons. Fuel rods not containing burnable poisons are disposed at positions in adjacent with fuel rods facing to a water rod at one or two directions. Local power at radial center of the fuel assembly is increased to flatten the distortion of radial power distribution. (N.H.)

  11. A feasibility study for the application of enriched gadolinia burnable absorber rods in nuclear core design

    International Nuclear Information System (INIS)

    Lee, Chung Chan; Zee, Sung Quun; Kim, Kang Seog; Song, Jae Seung

    2000-12-01

    An analysis model using MICBURN-3/CASMO-3 is established for the enriched gadolinia burnable absorber rods. A homogenized cross section editing code, PROLOG, is modified so that it can handle such a fuel assembly that includes two different types of gadolinia rods. Study shows that Gd-155 and Gd-157 are almost same in suppressing the excess reactivity and it is recommended to enrich both odd number isotopes, Gd-155 and Gd-157. It is estimated that the cycle length increases by 2 days if enriched gadolinia rods are used in the commercial nuclear power plant such as YGN-3 of which the cycle length is assumed 2 years. For the advanced integral reactor SMART in which ultra long cycle length and soluble boron-free operation concept is applied, natural gadolinia burnable absorber rods fail to control the excess reactivity. On the other hand, enriched gadolinia rods are successful in controling the excess reactivity. To minimize power peakings, various placements of gadolinia rods are tested. Also initial reactivity holddown and gadolinia burnout time are parametrized with respect to the number of gadolinia rods and gadolinia weight fractions

  12. Fuel assembly

    International Nuclear Information System (INIS)

    Sano, Hiroki; Fushimi, Atsushi; Tominaga, Kenji; Aoyama, Motoo; Ishii, Kazuya.

    1997-01-01

    In burnable poison-incorporated uranium fuels of a BWR type reactor, the compositional ratio of isotopes of the burnable poisons is changed so as to increase the amount of those having a large neutron absorbing cross sectional area. For example, if the ratio of Gd-157 at the same burnable poison enrichment degree is made greater than the natural ratio, this gives the same effect as the increase of the enrichment degree per one fuel rod, thereby providing an effect of reducing a surplus reactivity. Gadolinium, hafnium and europium as burnable poisons have an absorbing cross sectional area being greater in odd numbered nuclei than in even numbered nuclei, on the contrary, boron has a cross section being greater in even numbered nucleus than odd numbered nuclei. Accordingly, if the ratio of isotopes having greater cross section at the same burnable poison enrichment degree is made greater than the natural ratio, surplus reactivity at the initial stage of the burning can be reduced without greatly increasing the amount of burnable poison-incorporated uranium fuels, fuel loading amount is not reduced and the fuel economy is not worsened. (N.H.)

  13. Fuel assembly for nuclear reactor

    International Nuclear Information System (INIS)

    Yamanaka, Akihiro; Haikawa, Katsumasa; Haraguchi, Yuko; Nakamura, Mitsuya; Aoyama, Motoo; Koyama, Jun-ichi.

    1996-01-01

    In a BWR type fuel assembly comprising first fuel rods filled with nuclear fission products and second fuel rods filled with burnable poisons and nuclear fission products, the concentration of the burnable poisons mixed to a portion of the second fuel rods is controlled so that it is reduced at the upper portion and increased at the lower portion in the axial direction. In addition, a product of the difference of an average concentration of burnable poisons between the upper portion and the lower portion and the number of fuel rods is determined to higher than a first set value determined corresponding to the limit value of a maximum linear power density. The sum of the difference of the average concentration of the burnable poisons between the upper portion and the lower portion of the second fuel rod and the number of the second fuel rods is determined to lower than a second set value determined corresponding to a required value of a surplus reactivity. If the number of the fuel rods mixed with the burnable poisons is increased, the infinite multiplication factor at an initial stage of the burning is lowered and, if the concentration of the mixed burnable poisons is increased, the time of exhaustion of the burnable poisons is delayed. As a result, the maximum value of the infinite multiplication factor is suppressed thereby enabling to control surplus reactivity. (N.H.)

  14. A study on the nuclear characteristics of enriched gadolinia burnable absorber rods; the first year (2000) report

    International Nuclear Information System (INIS)

    Zee, Sung Quun; Lee, C.C.; Song, J. S.; Cho, B. O.; Joo, H. G.; Park, S. Y.; Kim, H. Y.; Cho, J. Y.; Kim, K. S.

    2001-04-01

    An analysis model using MICBURN-3/CASMO-3 is established for the enriched gadolinia burnable absorber rods. A homogenized cross section editing code, PROLOG, is modified so that it can handle such a fuel assembly that includes two different types of gadolinia rods. Study shows that Gd-155 and Gd-157 are almost same in suppressing the excess reactivity and it is recommended to enrich both odd number isotopes, Gd-155 and Gd-157. It is estimated that the cycle length increases by 2 days if enriched gadolinia rods are used in the commercial nuclear power plant such as YGN-3 of which the cycle length is assumed 2 years. For the advanced integral reactor SMART in which ultra long cycle length and soluble boron-free operation concept is applied, natural gadolinia burnable absorber rods fail to control the excess reactivity. On the other hand, enriched gadolinia rods are successful in controling the excess reactivity. To minimize power peakings, various placements of gadolinia rods are tested. Also initial reactivity holddown and gadolinia burnout time are parametrized with respect to the number of gadolinia rods and gadolinia weight fractions

  15. BWR type nuclear reactors

    International Nuclear Information System (INIS)

    Yamamoto, Toru.

    1987-01-01

    Purpose: To obtain reactor core characteristics with less changes in the excess reactivity due to fuel burnup even when the operation period varies. Constitution: In a BWR type reactor where fuel assemblies containing fuel rods incorporated with burnable poisons are arranged, the fuel assemblies are grouped into first fuel assemblies and second fuel assemblies. Then, the number of fuel rods incorporated with burnable poisons within the first fuel assemblies is made greater than that of the second fuel rods, while the concentration of the burnable poisons in the fuel rods incorporated with the burnable poisons in the first fuel assemblies is made lower than that of the fuel rods incorporated with the burnable poisons in the second fuel assemblies. In the BWR type reactor constituted in this way, the reactor core characteristics can be improved by changing the ratio between the first fuel assemblies and the second fuel assemblies charged to the reactor core, thereby decreasing the changes in the burnup of the excess reactivity. (Kamimura, M.)

  16. Preliminary Nuclear Analysis for the HANARO Fuel Element with Burnable Absorber

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Chul Gyo; Kim, So Young; In, Won Ho [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-10-15

    Burnable absorber is used for reducing reactivity swing and power peaking in high performance research reactors. Development of the HANARO fuel element with burnable absorber was started in the U-Mo fuel development program at HANARO, but detailed full core analysis was not performed because the current HANARO fuel management system is uncertain to analysis the HANARO core with burnable absorber. A sophisticated reactor physics system is required to analysis the core. The McCARD code was selected and the detailed McCARD core models, in which the basic HANARO core model was developed by one of the McCARD developers, are used in this study. The development of nuclear fuel requires a long time and correct developing direction especially by the nuclear analysis. This paper presents a preliminary nuclear analysis to promote the fuel development. Based on the developed fuel, the further nuclear analysis will improve reactor performance and safety. Basic nuclear analysis for the HANARO and the AHR were performed for getting the proper fuel elements with burnable absorber. Addition of 0.3 - 0.4% Cd to the fuel meat is promising for the current HANARO fuel element. Small addition of burnable absorber may not change any fuel characteristics of the HANARO fuel element, but various basic tests and irradiation tests at the HANARO core are required.

  17. Heat capacity of Dy6UO12(s)

    International Nuclear Information System (INIS)

    Sahu, M.; Nagara, B.K.; Saxena, M.K.; Dash, S.

    2010-01-01

    There is a need to improve the reactor performance through longer cycle length, which is being carried out by initial fuel enrichment. This additional fuel enrichment is being compensated by introduction of additional neutron absorber material called as burnable poison. Burnable poisons are materials having one or more isotopes which have high neutron absorption cross section and gets converted into other isotopes of relatively low absorption cross section. The use of burnable poison provides the necessary negative moderator reactivity coefficient at the beginning of core life and helps shape core power distribution. Usually rare-earth elements such as gadolinium, dysprosium and samarium have been applied for this purpose. Presently gadolinia doped urania is being used as burnable poison in boiling water reactor (BWR)

  18. Fuel assembly and reactor core

    International Nuclear Information System (INIS)

    Aoyama, Motoo; Koyama, Jun-ichi; Uchikawa, Sadao; Bessho, Yasunori; Nakajima, Akiyoshi; Maruyama, Hiromi; Ozawa, Michihiro; Nakamura, Mitsuya.

    1990-01-01

    The present invention concerns fuel assemblies charged in a BWR type reactor and the reactor core. The fuel assembly comprises fuel rods containing burnable poisons and fuel rods not containing burnable poisons. Both of the highest and the lowest gadolinia concentrations of the fuel rods containing gadolinia as burnable poisons are present in the lower region of the fuel assembly. This can increase the spectral shift effect without increasing the maximum linear power density. (I.N.)

  19. A novel concept of QUADRISO particles. Part II: Utilization for excess reactivity control

    Energy Technology Data Exchange (ETDEWEB)

    Talamo, Alberto, E-mail: alby@anl.go [Nuclear Engineering Division, Argonne National Laboratory, 9700 South Cass Avenue, Argonne, IL 60439 (United States)

    2010-07-15

    In high temperature reactors, burnable absorbers are utilized to manage the excess reactivity at the early stage of the fuel cycle. In this paper QUADRISO particles are proposed to manage the initial excess reactivity of high temperature reactors. The QUADRISO concept synergistically couples the decrease of the burnable poison with the decrease of the fissile materials at the fuel particle level. This mechanism is set up by introducing a burnable poison layer around the fuel kernel in ordinary TRISO particles or by mixing the burnable poison with any of the TRISO coated layers. At the beginning of life, the initial excess reactivity is small because some neutrons are absorbed in the burnable poison and they are prevented from entering the fuel kernel. At the end of life, when the absorber is almost depleted, more neutrons stream into the fuel kernel of QUADRISO particles causing fission reactions. The mechanism has been applied to a prismatic high temperature reactor with europium or erbium burnable absorbers, showing a significant reduction in the initial excess reactivity of the core.

  20. A novel concept of QUADRISO particles. Part II: Utilization for excess reactivity control

    International Nuclear Information System (INIS)

    Talamo, Alberto

    2010-01-01

    In high temperature reactors, burnable absorbers are utilized to manage the excess reactivity at the early stage of the fuel cycle. In this paper QUADRISO particles are proposed to manage the initial excess reactivity of high temperature reactors. The QUADRISO concept synergistically couples the decrease of the burnable poison with the decrease of the fissile materials at the fuel particle level. This mechanism is set up by introducing a burnable poison layer around the fuel kernel in ordinary TRISO particles or by mixing the burnable poison with any of the TRISO coated layers. At the beginning of life, the initial excess reactivity is small because some neutrons are absorbed in the burnable poison and they are prevented from entering the fuel kernel. At the end of life, when the absorber is almost depleted, more neutrons stream into the fuel kernel of QUADRISO particles causing fission reactions. The mechanism has been applied to a prismatic high temperature reactor with europium or erbium burnable absorbers, showing a significant reduction in the initial excess reactivity of the core.

  1. Reactor fuel element and fuel assembly

    International Nuclear Information System (INIS)

    Okada, Seiji; Ishida, Tsuyoshi; Ikeda, Atsuko.

    1997-01-01

    A mixture of fission products and burnable poisons is disposed at least to a portion between MOX pellets to form a burnable poison-incorporated fuel element without mixing burnable poisons to the MOX pellets. Alternatively, a mixture of materials other than the fission products and burnable poisons is formed into disks, a fuel lamination portion is divided into at least to two regions, and the ratio of number of the disks of the mixture relative to the volume of the region is increased toward the lower portion of the fuel lamination portion. With such a constitution, the axial power distribution of fuels can be made flat easily. Alternatively, the thickness of the disk of the mixture is increased toward the lower region of the fuel lamination portion to flatten the axial power distribution of the fuels in the same manner easily. The time and the cost required for the manufacture are reduced, and MOX fuels filled with burnable poisons with easy maintenance and control can be realized. (N.H.)

  2. Fuel assembly and reactor core

    International Nuclear Information System (INIS)

    Yuchi, Yoko; Aoyama, Motoo; Haikawa, Katsumasa; Yamanaka, Akihiro; Koyama, Jun-ichi.

    1996-01-01

    In a fuel assembly of a BWR type reactor, a region substantially containing burnable poison is divided into an upper region and a lower region having different average concentrations of burnable poison along a transverse cross section perpendicular to the axial direction. The ratio of burnable poison contents of both regions is determined to not more than 80%, and the average concentration of the burnable poison in the lower region is determined to not less than 9% by weight. An infinite multiplication factor at an initial stage of the burning of the fuel assembly is controlled effectively by the burnable poisons. Namely, the ratio of the axial power can be controlled by the distribution of the enrichment degree of uranium fuels and the distribution of the burnable poison concentration in the axial direction. Since the average enrichment degree of the reactor core has to be increased in order to provide an initially loaded reactor core at high burnup degree. Distortion of the power distribution in the axial direction of the reactor core to which fuel assemblies at high enrichment degree are loaded is flattened to improve thermal margin, to extend continuous operation period and increase a burnup degree upon take-out thereby improving fuel economy without worsening the reactor core characteristics of the initially loaded reactor core. (N.H.)

  3. Paired replacement fuel assemblies for BWR-type reactor

    International Nuclear Information System (INIS)

    Oguchi, Kazushige.

    1997-01-01

    There are disposed a large-diameter water rod constituting a non-boiling region at a central portion and paired replacement fuel assemblies for two streams having the same average enrichment degree and different amount of burnable poisons. The paired replacement fuel assemblies comprise a first fuel assembly having a less amount of burnable poisons and a second fuel assembly having a larger amount of burnable poisons. A number of burnable poison-containing fuel rods in adjacent with the large diameter water rod is increased in the second fuel assembly than the first fuel assembly. Then, the poison of the paired replacement fuel assemblies for the BWR type reactor can be annihilated simultaneously at the final stage of the cycle. Accordingly, fuels for a BWR type reactor excellent in economical property and safety and facilitating the design of the replacement reactor core can be obtained. (N.H.)

  4. A model for fuel shuffling and burnable absorbers optimization in low leakage PWRs

    International Nuclear Information System (INIS)

    Zavaljevski, N.

    1990-01-01

    A nonlinear model for the simultaneous optimization of fuel shuffling and burnable absorbers in PWRs is formulated using the depletion perturbation theory. The sensitivity coefficients are defined in a new way, using a macroscopic burnup model coupled with the explicit burnable absorbers depletion equation. Since first-order perturbation theory is limited to small changes in burnable absorber concentration, the associated control variable is continuous, with a constraint on maximal increment. Fuel shuffling is described by Boolean variables. Thus a special case of a mixed-integer quadratic programming problem is obtained, since the interaction of fuel and absorber optimization is considered. (author)

  5. Calculation of burnable cells-Hammer versus Leopard

    International Nuclear Information System (INIS)

    Dias, A.M.; Almeida, C.U.C. de; Pina, C.M. de; Prestes, L.F.; Lederman, L.; Nunes, N.P.; Branco, W.H.

    1977-02-01

    The nuclear parameters for the Angra-1 reactor core are obtained from the cross sections of soluble boron and burnable boron, calculated by the code CITHAM. The results are compared with those developed by the code LEOCIT [pt

  6. Fuel assemblies for use in BWR type reactors

    International Nuclear Information System (INIS)

    Hirukawa, Koji.

    1987-01-01

    Purpose: To moderate the peak configuration of the burnup degree change curve for the infinite multiplication factor by applying an improvement to the arrangement of fuel rods. Constitution: In a fuel assembly for a BWR type reactor comprising a plurality of fuel rods and water rods arranged in a square lattice, fuel rods containing burnable poisons are arranged at four corners at the second and the third layers from the outside of the square lattice arrangement. Among them, the Cd poison effect in the burnable poison incorporated fuel rods disposed at the second layer is somewhat greater at the initial burning stage and then rapidly decreased along with burning. While on the other hand, the poison effect of the burnable poison-incorporated fuel rods at the third layer is smaller than that at the second layer at the initial burning stage and the reduction in the poison effect due to burning is somewhat more moderate. Since these fuel rods are in adjacent with each other, they interfere to each other and also provide an effect of moderating the burning of the burnable poisons. (Takahashi, M.)

  7. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Domoto, Noboru; Masuda, Hiroyuki

    1989-01-01

    In a nuclear fuel assembly loaded with a plurality of fuel rods, the inside of a fuel rod disposed at a high neutron flux region is divided into an inner region and an outer region, and more burnable poisons are mixed in the inner region than in the outer region. Alternatively, the central portion of a pellet disposed in a high neutron flux region is made hollow, in which burnable poisons are charged. This can prevent neutron infinite multiplication factor from decreasing extremely at the initial burning stage. Further, the burnable poisons are not rapidly burnt completely and local peaking coefficient can be controlled. Accordingly, in a case of suppressing a predetermined excess reactivity by using a fuel rod incorporated with the burnable poison, the fuel economy can be improved more and the reactor core controllability can also be improved as compared with the usual case. (T.M.)

  8. Control component structure and its removal from fuel assembly

    International Nuclear Information System (INIS)

    Edwards, G.T.; Schluderberg, D.C.

    1982-01-01

    This invention provides methods and apparatus for securing and removing burnable poison rods to the spider in a fuel assembly. A pin is secured to one of the transverse ends of a burnable poison rod. The pin is seated in a bore that is formed in the spider arm appropriate to the rod under consideration. The burnable poison rod is separated from the spider arm by applying a force in a direction that is coincident with the longitudinal axis of the rod and its associated pin. The force is of sufficient magnitude to press the pin out of the spider arm

  9. Monte Carlo simulation in UWB1 depletion code

    International Nuclear Information System (INIS)

    Lovecky, M.; Prehradny, J.; Jirickova, J.; Skoda, R.

    2015-01-01

    U W B 1 depletion code is being developed as a fast computational tool for the study of burnable absorbers in the University of West Bohemia in Pilsen, Czech Republic. In order to achieve higher precision, the newly developed code was extended by adding a Monte Carlo solver. Research of fuel depletion aims at development and introduction of advanced types of burnable absorbers in nuclear fuel. Burnable absorbers (BA) allow the compensation of the initial reactivity excess of nuclear fuel and result in an increase of fuel cycles lengths with higher enriched fuels. The paper describes the depletion calculations of VVER nuclear fuel doped with rare earth oxides as burnable absorber based on performed depletion calculations, rare earth oxides are divided into two equally numerous groups, suitable burnable absorbers and poisoning absorbers. According to residual poisoning and BA reactivity worth, rare earth oxides marked as suitable burnable absorbers are Nd, Sm, Eu, Gd, Dy, Ho and Er, while poisoning absorbers include Sc, La, Lu, Y, Ce, Pr and Tb. The presentation slides have been added to the article

  10. Report on the evaluation of the tritium producing burnable absorber rod lead test assembly. Revision 1

    International Nuclear Information System (INIS)

    1997-03-01

    This report describes the design and fabrication requirements for a tritium-producing burnable absorber rod lead test assembly and evaluates the safety issues associated with tritium-producing burnable absorber rod irradiation on the operation of a commercial light water reactor. The report provides an evaluation of the tritium-producing burnable absorber rod design and concludes that irradiation can be performed within U.S. Nuclear Regulatory Commission regulations applicable to a commercial pressurized light water reactor

  11. Impact of burnable absorber Gd on nuclide composition for VVER-440 fuel (Gd-2)

    International Nuclear Information System (INIS)

    Zajac, R.; Chrapciak, V.

    2010-01-01

    The latest version of Russian fuel VVER-440 includes burnable absorber in 6 pins. In this article is impact of burnable absorber on nuclide composition and criticality analyzed. In part 1 was analyzed whole burnup interval 0-50 MWd/kgU. In present part 2 are detailed analysis only for first cycle (burnup 0-10 MWd/kgU). (Authors)

  12. Nuclear reactor core having nuclear fuel and composite burnable absorber arranged for power peaking and moderator temperature coefficient control

    International Nuclear Information System (INIS)

    Kapil, S.K.

    1991-01-01

    This patent describes a nuclear reactor core. It comprises a first group of fuel rods containing fissionable material and being free of burnable absorber material; and a second group of fuel rods containing fissionable material and first and second burnable absorber material; the first burnable absorber material being a boron-bearing material which does not contain erbium and the second burnable absorber material being an erbium material; the first and second burnable absorber materials being in the form of an outer coating on the fissionable material, the outer coating being composed of an inner layer of one of the boron-bearing material which does not contain erbium and the erbium material and an outer layer of the other of the boron-bearing material which does not contain erbium and the erbium material

  13. Effects of limestone petrography and calcite microstructure on OPC clinker raw meals burnability

    Science.gov (United States)

    Galimberti, Matteo; Marinoni, Nicoletta; Della Porta, Giovanna; Marchi, Maurizio; Dapiaggi, Monica

    2017-10-01

    Limestone represents the main raw material for ordinary Portland cement clinker production. In this study eight natural limestones from different geological environments were chosen to prepare raw meals for clinker manufacturing, aiming to define a parameter controlling the burnability. First, limestones were characterized by X-Ray Fluorescence, X-Ray Powder Diffraction and Optical Microscopy to assess their suitability for clinker production and their petrographic features. The average domains size and the microstrain of calcite were also determined by X-Ray Powder Diffraction line profile analysis. Then, each limestone was admixed with clay minerals to achieve the adequate chemical composition for clinker production. Raw meals were thermally threated at seven different temperatures, from 1000 to 1450 °C, to evaluate their behaviour on heating by ex situ X-Ray Powder Diffraction and to observe the final clinker morphology by Scanning Electron Microscopy. Results indicate the calcite microstrain is a reliable parameter to predict the burnability of the raw meals, in terms of calcium silicates growth and lime consumption. In particular, mixtures prepared starting from high-strained calcite exhibit a better burnability. Later, when the melt appears this correlation vanishes; however differences in the early burnability still reflect on the final clinker composition and texture.

  14. Nuclear reactor

    International Nuclear Information System (INIS)

    Aleite, W.; Bock, H.W.; Struensee, S.

    1976-01-01

    The invention concerns the use of burnable poisons in a nuclear reactor, especially in PWRs, in order to improve the controllability of the reactor. An unsymmetrical arrangement in the lattice is provided, if necessary also by insertion of special rods for these additions. It is proposed to arrange the burnable poisons in fuel elements taken over from a previous burn-up cycle and to distribute them, going out from the side facing the control rods, over not more than 20% of the lenth of the fuel elements. It seems sufficient, for the burnable poisons to bind an initial reactivity of only 0.1% and to become ineffective after normal operation of 3 to 4 months. (ORU) [de

  15. Benchmark solution of contemporary PWR integral fuel burnable absorbers

    International Nuclear Information System (INIS)

    Stucker, D.L.; Hone, M.J.; Holland, R.A.

    1993-01-01

    This paper presents a closely controlled benchmark solution of the two major contemporary pressurized water reactor integral burnable absorber designs: zirconium diboride (ZrB 2 ) and gadolinia (Gd 2 O 3 ). The comparison is accomplished using self-generating equilibrium cycles with equal energy, equal discharge burnup, and equal safety constraints. The reference plant for this evaluation is a 3411-MW(thermal) Westinghouse four-loop nuclear steam supply system operating with an inlet temperature of 285.9 degrees C, a core coolant mass now rate of 16877.3 kg/s, and coolant pressure of 15.5 MPa. The reactor consists of 193 VANTAGE 5H fuel assemblies that are discharged at a region average burnup of 48.4 GWd/tonne U. Each fuel assembly contains a natural uranium axial blanket 15.24 cm long at the top and the bottom of the fuel rod. The burnable absorber rods are symmetrically radially dispersed within the fuel assembly such that intrabundle power peaking is minimized. The burnable absorber material for both ZrB 2 and Gd 2 O 3 is axially zoned to the central 304.8 cm of the absorber-bearing fuel rods. The fuel management was constrained such that the thermal and safety limitations of F δH q -5 /degrees C were simultaneously achieved. The maximum long-term operating soluble boron concentration was also limited to 446 effective full-power days (EFPDs) including 14 EFPDs of power coastdown were assumed

  16. Comparison of RSYST and WIMSD-4 performance for gadolinium poisoned lattices

    Energy Technology Data Exchange (ETDEWEB)

    Kulikowska, T; Szczesna, B; Sadowska, B

    1992-06-01

    The participation in the Co-ordinated Research Programme on `Safe Core Management with Burnable Absorbers in VVERs` has created a possibility of validation of our basic calculational tools for advanced lattice calculations. A systematic analysis of the performance of WIMSD-4 and the recently adapted RSYST modular systems has been carried out on the basis of two benchmarks with gadolinium bearing pins. The report consists of a detailed comparison of methods and models available in RSYST and WIMSD-4 followed by calculational results and their discussion. Finally, the conclusions are drawn concerning the applicability of the two codes for clean fuel and gadolinium poisoned reactor lattices. (author). 26 refs, 19 figs, 19 tabs.

  17. A reverse depletion method for pressurized water reactor core reload design

    International Nuclear Information System (INIS)

    Downar, T.J.; Kin, Y.J.

    1986-01-01

    Low-leakage fuel management is currently practiced in over half of all pressurized water reactor (PWR) cores. The large numbers of burnable poison pins used to control the power peaking at the in-board fresh fuel positions have introduced an additional complexity to the core reload design problem. In addition to determining the best location of each assembly in the core, the designer must concurrently determine the distribution of burnable poison pins in the fresh fuel. A new method for performing core design more suitable for low-leakage fuel management is reported. A procedure was developed that uses the wellknown ''Haling depletion'' to achieve an end-of-cycle (EOC) core state where the assembly pattern is configured in the absence of all control poison. This effectively separates the assembly assignment and burnable poison distribution problems. Once an acceptable pattern at EOC is configured, the burnable and soluble poison required to control the power and core excess reactivity are solved for as unknown variables while depleting the cycle in reverse from the EOC exposure distribution to the beginning of cycle. The methods developed were implemented in an approved light water reactor licensing code to ensure the validity of the results obtained and provided for the maximum utility to PWR core reload design

  18. Evaluation of the presence of a burnable absorber in an assembly 3x3 type PWR

    International Nuclear Information System (INIS)

    Martinez F, M. A.; Del Valle G, E.; Alonso V, G.

    2008-01-01

    In the present work the effect is evaluated that causes the presence of a burnable absorber in an adjustment of rods of 3x3 of a fuel assembly type PWR using CASMO-4 code, when comparing the infinite multiplication factor and some average cross sections by means of codes MCNP-4A, CASMO-3 and HELIOS. For this evaluation two cases are evaluated: first consists of an adjustment of rods of 3x3 full completely of fuel and the second consists of a central rod full with a burnable absorber type wet annular burnable absorber (WABA) and the remaining full fuel rods. In both cases the enrichment of the fissile isotopes is varied, for two types of fuel, MOX degree armament and UO 2 . (Author)

  19. Group constants calculation for fuel assemblies containing burnable absorbers; Prorachun grupnih konstanti gorivnih elemenata koji sadrzhe sagorive apsorbere

    Energy Technology Data Exchange (ETDEWEB)

    Petrovic, B [Institut Rudjer Boskovic, Zagreb (Yugoslavia); Pevec, D [Elektrotehnicki Fakultet, Zagreb Univ. (Yugoslavia); Urli, N; Shmuc, T [Institut Rudjer Boskovic, Zagreb (Yugoslavia)

    1988-07-01

    The upgrading of the computer code package PSU-LEOPARD/MCRAC is described. The upgraded package enables modelling of fuel assemblies containing burnable absorbers in the form of borosilicate glass rodlets, or, integral fuel burnable absorbers. The package is tested using the NPP Krsko core data. (author)

  20. Method of assembling and disassembling a control component structure

    International Nuclear Information System (INIS)

    Edwards, G.T.; Schluderberg, D.C.

    1982-01-01

    A technique is provided for engaging and disengaging burnable poison rods from the spider in a fuel assembly. The cap on the end of each of the burnable poison rods is provided with a shank that is received in the respective bore formed in the spider. A frangible flange secures the shank and rod to the spider. Pressing the shank in the direction of the bore axis ruptures the frangible flange to release the rod from the spider

  1. New burnable absorber for long-cycle low boron operation of PWRs

    International Nuclear Information System (INIS)

    Choe, Jiwon; Shin, Ho Cheol; Lee, Deokjung

    2016-01-01

    Highlights: • A burnable absorber design for advanced PWRs with a low soluble boron concentration. • The burnable absorber consists of a UO 2 – 157 Gd 2 O 3 rod with a thin layer of Zr 167 Er 2 . • Three verification cases: two kinds of fuel assemblies and an OPR-1000 core. - Abstract: This paper presents a new high performance burnable absorber (BA) design for advanced Pressurized Water Reactors (PWRs) aiming for a long-cycle operation with a low soluble boron concentration. The new BA consists of a UO 2 – 157 Gd 2 O 3 rod covered with a thin layer of Zr 167 Er 2 . A key feature of this new BA is that enriched isotopes, 157 Gd and 167 Er, are used as absorber materials. Since the high absorption cross section of 157 Gd can reduce the mass fraction of Gd 2 O 3 in UO 2 –Gd 2 O 3 , the thermal margin of fuel rods will increase with higher heat conductivity. Also, the 157 Gd transmutes into 158 Gd by neutron absorption and therefore the residual penalty at the end of cycle (EOC) will decrease. Since 167 Er has a resonance near the thermal neutron energy region, the moderator temperature coefficient (MTC) will become more negative and the control rod worth will increase. These advantages of the new BA are demonstrated with three verification cases: a 17 × 17 Westinghouse (WH) type fuel assembly, a 16 × 16 Combustion Engineering (CE) type fuel assembly, and an OPR-1000 equilibrium core.

  2. Nuclear fuel management optimization for LWRs

    International Nuclear Information System (INIS)

    Turinsky, Paul J.

    1997-01-01

    LWR in core nuclear fuel management involves the placement of fuel and control materials so that a specified objective is achieved within constraints. Specifically, one is interested in determining the core loading pattern (LP of fuel assemblies and burnable poisons and for BWR, also control rod insertion versus cycle exposure. Possible objectives include minimization of feed enrichment and maximization of cycle energy production, discharge burnup or thermal margin. Constraints imposed relate to physical constraints, e.g. no discrete burnable poisons in control rod locations, and operational and safety constraints, e.g. maximum power peaking limit. The LP optimization problem is a large scale, nonlinear, mixed-integer decision variables problem with active constraints. Even with quarter core symmetry imposed, there are above 10 100 possible LPs. The implication is that deterministic optimization methods are not suitable, so in this work we have pursued using the stochastic Simulated Annealing optimization method. Adaptive penalty functions are used to impose certain constraints, allowing unfeasible regions of the search space to be transverse. Since ten of thousands of LPs must be examined to achieve high computational efficiency, higher-order Generalized Perturbation Theory is utilized to solve the Nodal Expansion Method for of the two-group neutron diffusion. These methods have been incorporated into the FORMOSA series of codes and used to optimize PWR and BWR reload cores. (author). 9 refs., 3 tabs

  3. the effect of advanced fuel designs on fuel utilization

    International Nuclear Information System (INIS)

    Sarikaya, B.; Colak, U.; Tombakoglu, M.; Yilmazbayhan, A.

    1997-01-01

    Fuel management is one of the key topic in nuclear engineering. It is possible to increase fuel burnup and reactor lifetime by using advanced fuel management strategies. In order to increase the cycle lifetime, required amount of excess reactivity must be added to system. Burnable poisons can be used to compensate this excess reactivity. Usually gadolinium (Gd) is used as burnable poison. But the use of Gd presents some difficulties that have not been encountered with the use of boron

  4. Nuclear reactor core having nuclear fuel and composite burnable absorber arranged for power peaking and moderator temperature coefficient control

    International Nuclear Information System (INIS)

    Kapil, S.K.

    1992-01-01

    This patent describes a burnable absorber coated nuclear fuel. It comprises a nuclear fuel substrate containing a fissionable material; and an outer burnable absorber coating applied on an outer surface of the substrate; the outer absorber coating being composed of an inner layer of a boron-bearing material except for erbium boride and an outer layer of an erbium material

  5. Storm-Related Carbon Monoxide Poisoning: An Investigation of Target Audience Knowledge and Risk Behaviors.

    Science.gov (United States)

    Damon, Scott A; Poehlman, Jon A; Rupert, Douglas J; Williams, Peyton N

    Carbon monoxide (CO) poisonings in the United States consistently occur when residents improperly use portable gasoline-powered generators and other tools following severe storms and power outages. However, protective behaviors-such as installing CO alarms and placing generators more than 20 feet away from indoor structures-can prevent these poisonings. This study identified knowledge, attitudes, and beliefs that lead consumers to adopt risk and protective behaviors for storm-related CO poisoning and post-storm generator use. Four focus groups (32 participants in total) were conducted with generator owners in winter and summer storm-prone areas to explore home safety, portable generator use, CO poisoning knowledge, and generator safety messages. Discussions were transcribed, and findings analyzed using an ordered meta-matrix approach. Although most generator owners were aware of CO poisoning, many were unsure what constitutes a safe location for generator operation and incorrectly stated that enclosed areas outside the home-such as attached garages, sheds, and covered porches-were safe. Convenience and access to appliances often dictated generator placement. Participants were receptive to installing CO alarms in their homes but were unsure where to place them. These findings suggest a deficit in understanding how to operate portable generators safely and a need to correct misconceptions around safe placement. In terms of behavioral price, the simple installation and maintenance of inexpensive CO alarms may be the most important strategy for ultimately protecting homes from both storm-related and other CO exposures.

  6. Improvements in nuclear fuel assembly sleeves

    International Nuclear Information System (INIS)

    Eaton, C.W.; Seeley, T.A.; Ince, G.; Speakman, W.T.

    1986-01-01

    The graphite sleeve of a nuclear fuel assembly or reflector element for a stringer mounts a number of grids via mounting assemblies installed in grooves formed in the interior wall surface of the sleeve. The bore of the sleeve is of reduced cross-section between two successive grooves such that the internal diameter of the sleeve is substantially the same as the inner diameter of the radially innermost extremity of the mounting assemblies whereby the coolant pressure loss at each transition between the reduced diameter bore section and the mounting assemblies is reduced. Each mounting assembly may be of radially contractable split ring construction to permit its placement in the groove and may carry burnable poison material. (author)

  7. Improvements in nuclear fuel assembly sleeves

    Energy Technology Data Exchange (ETDEWEB)

    Eaton, C.W.; Seeley, T.A.; Ince, G.; Speakman, W.T.

    1986-02-26

    The graphite sleeve of a nuclear fuel assembly or reflector element for a stringer mounts a number of grids via mounting assemblies installed in grooves formed in the interior wall surface of the sleeve. The bore of the sleeve is of reduced cross-section between two successive grooves such that the internal diameter of the sleeve is substantially the same as the inner diameter of the radially innermost extremity of the mounting assemblies whereby the coolant pressure loss at each transition between the reduced diameter bore section and the mounting assemblies is reduced. Each mounting assembly may be of radially contractable split ring construction to permit its placement in the groove and may carry burnable poison material.

  8. UO2-7%Gd2O3 fuel process development by mechanical blending with reprocessing of waste products and usage of densification additive

    International Nuclear Information System (INIS)

    Santos, Lauro Roberto dos

    2009-01-01

    In the nuclear fuel cycle, reprocessing and storage of 'burned' fuels, either temporary or permanent, demand high investments and, in addition, can potentially generate environmental problems. A strategy to decrease these problems is to adopt measures to reduce the amount of waste generated. The usage of integrated burnable poison based on gadolinium is a measure that contributes to achieve this goal. The reason to use burnable poison is to control the neutron population in the reactor during the early life of the fresh reactor core or the beginning of each recharging fuel cycle, extending its cycle duration. Another advantage of using burnable poison is to be able to operate the reactor with higher burning rate, optimizing the usage of the fuel. The process of manufacturing UO 2 -Gd 2 O 3 integrated burnable fuel poison generates waste that, as much as possible, needs to be recycled. Blending of Gd 2 O 3 in UO 2 powder requires the usage of a special additive to achieve the final fuel pellet specified density. The objective of this work is to develop the process of obtaining UO 2 - 7% Gd 2 O 3 integrated burnable poison using densification additives, aluminum hydroxide (Al(OH)3), and reprocessing manufacturing waste products by mechanical blending. The content of 7%- Gd 2 O 3 is based on commercial PWR reactor fuels - Type Angra 2. The results show that the usage of Al(OH) 3 as an additive is a very effective choice that promotes the densification of fuel pellets with recycle up to 10%. Concentrations of 0,20 % of Al(OH) 3 were found to be the indicated amount on an 7 industrial scale, specially when the recycled products come from U 3 O 8 obtained by calcination of sintered pellets. This is particularly interesting because it is following the steps of sintering and rectifying of the pellets, which is generating the largest amounts of recycled material. (author)

  9. UO2-7%Gd2O3 fuel process development by mechanical blending with reprocessing of waste products and usage of densification additive

    International Nuclear Information System (INIS)

    Santos, Lauro Roberto dos

    2009-01-01

    In the nuclear fuel cycle, reprocessing and storage of 'burned' fuels, either temporary or permanent, demand high investments and, in addition, can potentially generate environmental problems. A strategy to decrease these problems is to adopt measures to reduce the amount of waste generated. The usage of integrated burnable poison based on gadolinium is a measure that contributes to achieve this goal. The reason to use burnable poison is to control the neutron population in the reactor during the early life of the fresh reactor core or the beginning of each recharging fuel cycle, extending its cycle duration. Another advantage of using burnable poison is to be able to operate the reactor with higher burning rate, optimizing the usage of the fuel. The process of manufacturing UO 2 -Gd 2 O 3 integrated burnable fuel poison generates waste that, as much as possible, needs to be recycled. Blending of Gd 2 O 3 in UO 2 powder requires the usage of a special additive to achieve the final fuel pellet specified density. The objective of this work is to develop the process of obtaining UO 2 - 7% Gd 2 O 3 integrated burnable poison using densification additives, aluminum hydroxide (Al(OH) 3 ), and reprocessing manufacturing waste products by mechanical blending. The content of 7%- Gd 2 O 3 is based on commercial PWR reactor fuels - Type Angra 2. The results show that the usage of Al(OH) 3 as an additive is a very effective choice that promotes the densification of fuel pellets with recycle up to 10%. Concentrations of 0,20 % of Al(OH) 3 were found to be the indicated amount on an industrial scale, specially when the recycled products come from U 3 O 8 obtained by calcination of sintered pellets. This is particularly interesting because it is following the steps of sintering and rectifying of the pellets, which is generating the largest amounts of recycled material. (author)

  10. Heterogeneous neutron absorbers development

    International Nuclear Information System (INIS)

    Boccaccini, Aldo; Agueda, Horacio; Russo, Diego; Perez, Edmundo

    1987-01-01

    The use of solid burnable absorber materials in power light water reactors has increased in the last years, specially due to improvements attained in costs of generated electricity. The present work summarizes the basic studies made on an alumina-gadolinia system, where alumina is the inert matrix and gadolinia acts as burnable poison, and describes the fabrication method of pellets with that material. High density compacts were obtained in the range of concentrations used by cold pressing and sintering at 1600 deg C in inert (Ar) atmosphere. Finally, the results of the irradiation experiences made at RA-6 reactor, located at the Bariloche Atomic Center, are given where variations on negative reactivity caused by introduction of burnable poison rods were measured. The results obtained from these experiences are in good agreement with those coming from calculation codes. (Author)

  11. Review of international solutions to NEACRP benchmark BWR lattice cell problems

    International Nuclear Information System (INIS)

    Halsall, M.J.

    1977-12-01

    This paper summarises international solutions to a set of BWR benchmark problems. The problems, posed as an activity sponsored by the Nuclear Energy Agency Committee on Reactor Physics, were as follows: 9-pin supercell with central burnable poison pin, mini-BWR with 4 pin-cells and water gaps and control rod cruciform, full 7 x 7 pin BWR lattice cell with differential U 235 enrichment, and full 8 x 8 pin BWR lattice cell with water-hole, Pu-loading, burnable poison, and homogenised cruciform control rod. Solutions have been contributed by Denmark, Japan, Sweden, Switzerland and the UK. (author)

  12. DELIGHT-B/REDEL, point reactivity burnup code for high-temperature gas-cooled reactor cells

    International Nuclear Information System (INIS)

    Shindo, Ryuiti; Watanabe, Takashi.

    1977-03-01

    Code DELIGHT-2 was previously developed to analyze cell burnup characteristics and to produce few-group constants for core burnup calculation in high-temperature gas-cooled reactors. In the code, burnup dependency of the burnable poison, boron-10, is considered with the homogeneous model of space. In actuality, however, the burnable poison is used as homogeneous rods or uniform rods of small granular poison and graphite, to control the reactivity and power distribution. Precise analysis of the burnup characteristics is thus difficult because of the heterogeneity due to the configuration of poison rods. In cell burnup calculation, the DELIGHT-B, which is a modification of DELIGHT-2, takes into consideration this heterogeneous effect. The auxiliary code REDEL, a reduction of DELIGHT-B, used in combination with 3 dimensional diffusion code CITATION, is for core burnup calculation with the macro-scopic cross section model. (auth.)

  13. CLUPH: a Fortran program of collision probabilities for hexagonal lattice and its application to VHTR

    International Nuclear Information System (INIS)

    Tsuchihashi, Keichiro; Gotoh, Yorio

    1981-02-01

    A new collision probability routine CLUPH was added to the computer program set LAMP-B to analyse the hexagonal VHTR fuel and control blocks where in addition to the annular array of fuel pin rods the asymmetric insertions of burnable poison rods and control rods are characteristic. The perfect reflective boundary condition is no more realistic to consider the arrangement of asymmetric hexagonal blocks. The periodic and the rotational arrangement of blocks are surveyed to consider the interference effect between the burnable poison rods. In addition the effects of coated particle fuel in fuel rod, and of B 4 C grain in burnable poison rod, are investigated. The average cross sections of control rod block were derived from the calculation of a super cell which consists of the control rod block and of the surrounding six fuel blocks. The care was taken to the control rod block located at the core-reflector boundary by replacing a sector of surrounding material in supper cell by reflector material. The two dimensional diffusion calculations of simplified cores of Mk-III were performed to obtain the reactivity worths of control rods, for illustration. (author)

  14. Concept of the core for a small-to-medium-sized BWR that does not use control rods during normal operation

    Energy Technology Data Exchange (ETDEWEB)

    Nakadozono, N.; Ikegawa, T., E-mail: naoyuki.nakadozono.st@hitachi.com [Hitachi Ltd., Hitachi Research Lab., Ibaraki (Japan); Nishida, K. [Hitachi Works, Hitachi-GE Nuclear Energy Ltd., Hitachi-shi, Ibaraki (Japan)

    2013-07-01

    A small-to-medium-sized boiling water reactor (BWR) with a natural circulation system is being developed for countries where initial investment funds for construction are limited and electricity transmission networks have not been fully constructed. To lighten operators' work load, a core that does not use control rods during normal operation (control rod-free core) was developed by using a neutronics calculation system coupled with core flow evaluation. The control rod-free core had large core power fluctuation with conventional burnable poison design. The target of core power fluctuation was set to less than 10% and was achieved by optimization of burnable poison arrangement. (author)

  15. Special topics of inner fuel management

    International Nuclear Information System (INIS)

    Wuenschmann, A.

    1977-01-01

    Burnable Poison Rod Assemblies (BPRA) are currently used as lumped burnable poison only in the first cycles of many power reactors to insure a negative moderator coefficient at beginning of life and to help shape core power distribution (out-in shuffle scheme). BPRA's are also a valuable tool in later cycles where they can be used as an additional design parameter to improve fuel performance and fuel cycle economics, to shape fuel assembly power, and to increase fuel management flexibility (in-out shuffle scheme). This paper describes the two fuel shuffle schemes and compares the two shuffle strategies concerning economic and flexibility aspects. (orig.) [de

  16. Concept of the core for a small-to-medium-sized BWR that does not use control rods during normal operation

    International Nuclear Information System (INIS)

    Nakadozono, N.; Ikegawa, T.; Nishida, K.

    2013-01-01

    A small-to-medium-sized boiling water reactor (BWR) with a natural circulation system is being developed for countries where initial investment funds for construction are limited and electricity transmission networks have not been fully constructed. To lighten operators' work load, a core that does not use control rods during normal operation (control rod-free core) was developed by using a neutronics calculation system coupled with core flow evaluation. The control rod-free core had large core power fluctuation with conventional burnable poison design. The target of core power fluctuation was set to less than 10% and was achieved by optimization of burnable poison arrangement. (author)

  17. Assessment of erbium as candidate burnable absorber for future PWR operaning cycles: A neutronic and fabrication study

    International Nuclear Information System (INIS)

    Asou, M.; Dehaudt, P.; Porta, J.

    1995-01-01

    Erbium begins to play a role in the control of PWR core reactivity. Generally speaking, burnable absorbers were only used to establish fresh core equilibrium. In France, since the possibility of extending irradiation cycles by 12 to 18 months, then up to 24 and 30 months, has been envisaged, there is renewed interest in burnable absorbers. The fabrication of PWR pellets has been investigated, providing high density and a good erbium homogeneity. The pellets characteristics were consistent with the specifications of PWR fuel. However, with the present process, the grain size remains small. Studies in progress now shows that erbium is not only a valuable alternative to gadolinium, for long fuel cycles (≥18 months) but also a new fuel concept. (orig.)

  18. Development of an Electroplating Method Using the Emulsion Under Supercritical C0{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Jeongmin; Park, Kwangheon; Ha, Sungwoo [Kyunghee University, Yongin (Korea, Republic of)

    2015-10-15

    The development of an internal cladding metal coating technology is required as a measure for manufacturing homogeneous burnable poison and preventing PCI. This study applied nickel plating obtaining a film on the metal surface by making the emulsion of supercritical CO2 and plating solution. It is an eco-friendly process that reduced an electrolyte used in the electroplating process to 40% and a method that can inhibit the effect of bubbles generated during plating. According to the experimental results, it was found that emulsion can be formed through agitation by using ultrasonic horn. And the nickel plating film in the relatively uniform and dense from was formed in Zry-4 and Cu specimens with the formed emulsion. Additionally, the side effects of pinhole in existing electroplating were diminished through the emulsion electroplating. Process development research is underway in order to secure a plating layer with the smoother and generally even specimen surface and find optimized plating conditions and this study can be used as the basic data for new plating process development. Recently, pressurized-water reactor nuclear fuel has been developed as high burn up nuclear fuel that can be operated for a long time. To this end, the nuclear fuel aggregate adding neutron absorber (Burnable absorber-BA) is required. To this end, a new technology to replace burnable poison in the form of pellet is required. If BA coating is made inside the nuclear fuel cladding, it is possible to produce burnable poison that improved performance more than that of burnable poison in the form of existing pellet. Generally, coating using plating can be simply manufactured at a low temperature compared to the complex process of making pellet and can also distribute burnable poison overall evenly. The problem in the behavior of high burn up nuclear fuel is pellet-cladding interaction (PCI) shown while burning. Several methods to reduce it have been devised and recently, research on nuclear

  19. Development of an Electroplating Method Using the Emulsion Under Supercritical C02

    International Nuclear Information System (INIS)

    Choi, Jeongmin; Park, Kwangheon; Ha, Sungwoo

    2015-01-01

    The development of an internal cladding metal coating technology is required as a measure for manufacturing homogeneous burnable poison and preventing PCI. This study applied nickel plating obtaining a film on the metal surface by making the emulsion of supercritical CO2 and plating solution. It is an eco-friendly process that reduced an electrolyte used in the electroplating process to 40% and a method that can inhibit the effect of bubbles generated during plating. According to the experimental results, it was found that emulsion can be formed through agitation by using ultrasonic horn. And the nickel plating film in the relatively uniform and dense from was formed in Zry-4 and Cu specimens with the formed emulsion. Additionally, the side effects of pinhole in existing electroplating were diminished through the emulsion electroplating. Process development research is underway in order to secure a plating layer with the smoother and generally even specimen surface and find optimized plating conditions and this study can be used as the basic data for new plating process development. Recently, pressurized-water reactor nuclear fuel has been developed as high burn up nuclear fuel that can be operated for a long time. To this end, the nuclear fuel aggregate adding neutron absorber (Burnable absorber-BA) is required. To this end, a new technology to replace burnable poison in the form of pellet is required. If BA coating is made inside the nuclear fuel cladding, it is possible to produce burnable poison that improved performance more than that of burnable poison in the form of existing pellet. Generally, coating using plating can be simply manufactured at a low temperature compared to the complex process of making pellet and can also distribute burnable poison overall evenly. The problem in the behavior of high burn up nuclear fuel is pellet-cladding interaction (PCI) shown while burning. Several methods to reduce it have been devised and recently, research on nuclear

  20. Fuel assembly

    International Nuclear Information System (INIS)

    Ueda, Sei; Ando, Ryohei; Mitsutake, Toru.

    1995-01-01

    The present invention concerns a fuel assembly suitable to a BWR-type reactor and improved especially with the nuclear characteristic, heat performance, hydraulic performance, dismantling or assembling performance and economical property. A part of poison rods are formed as a large-diameter/multi-region poison rods having a larger diameter than a fuel rod. A large number of fuel rods are disposed surrounding a large diameter water rod and a group of the large-diameter/multi-region poison rods in adjacent with the water rod. The large-diameter water rod has a burnable poison at the tube wall portion. At least a portion of the large-diameter poison rods has a coolant circulation portion allowing coolants to circulate therethrough. Since the large-diameter poison rods are disposed at a position of high neutron fluxes, a large neutron multiplication factor suppression effect can be provided, thereby enabling to reduce the number of burnable poison rods relative to fuels. As a result, power peaking in the fuel assembly is moderated and a greater amount of plutonium can be loaded. In addition the flow of cooling water which tends to gather around the large diameter water rod can be controlled to improve cooling performance of fuels. (N.H.)

  1. The use of graphite for the reduction of void reactivity in CANDU reactors

    International Nuclear Information System (INIS)

    Min, B.J.; Kim, B.G.; Sim, K-S.

    1995-01-01

    Coolant void reactivity can be reduced by using burnable poison in CANDU reactors. The use of graphite in the fuel bundle is introduced to reduce coolant void reactivity by adding an appropriate amount of burnable poison in the central rod. This study shows that sufficiently low void reactivity which in controllable by Reactor Regulating System (RRS) can be achieved by using graphite used fuel with slightly enriched uranium. Zero void reactivity can be also obtained by using graphite used fuel with a large central rod. A new fuel bundle with graphite rods can substantially reduce the void reactivity with less burnup penalty compared to previously proposed low void reactivity fuel with depleted uranium. (author)

  2. Advanced PWR fuel design concepts

    International Nuclear Information System (INIS)

    Andersor, C.K.; Harris, R.P.; Crump, M.W.; Fuhrman, N.

    1987-01-01

    For nearly 15 years, Combustion Engineering has provided pressurized water reactor fuel with the features most suppliers are now introducing in their advanced fuel designs. Zircaloy grids, removable upper end fittings, large fission gas plenum, high burnup, integral burnable poisons and sophisticated analytical methods are all features of C-E standard fuel which have been well proven by reactor performance. C-E's next generation fuel for pressurized water reactors features 24-month operating cycles, optimal lattice burnable poisons, increased resistance to common industry fuel rod failure mechanisms, and hardware and methodology for operating margin improvements. Application of these various improvements offer continued improvement in fuel cycle economics, plant operation and maintenance. (author)

  3. performance calculations of gadolinium oxide and boron nitride coated fuel

    International Nuclear Information System (INIS)

    Tanker, E.; Uslu, I.; Disbudak, H.; Guenduez, G.

    1997-01-01

    A comparative study was performed on the behaviour of natural uranium dioxide-gadolinium oxide mixture fuel and boron nitride coated low enriched fuel in a pressurized water reactor. A fuel element containing one burnable poison fuel pins was modeled with the computer code WIMS, and burn-up dependent critically, fissile isotope inventory and two dimensional power distribution were obtained. Calculations were performed for burnable poison fuels containing 5% and 10% gadolinium oxide and for those coated with 1μ,5μ and 10μ of boron nitride. Boron nitride coating was found superior to gadolinium oxide on account of its smoother criticality curve, lower power peaks and insignificant change in fissile isotope content

  4. Incineration of dry burnable waste from reprocessing plants with the Juelich incineration process

    International Nuclear Information System (INIS)

    Dietrich, H.; Gomoll, H.; Lins, H.

    1987-01-01

    The Juelich incineration process is a two stage controlled air incineration process which has been developed for efficient volume reduction of dry burnable waste of various kinds arising at nuclear facilities. It has also been applied to non nuclear industrial and hospital waste incineration and has recently been selected for the new German Fuel Reprocessing Plant under construction in Wackersdorf, Bavaria, in a modified design

  5. A novel concept of QUADRISO particles Part III: applications to the plutonium-thorium fuel cycle

    International Nuclear Information System (INIS)

    Talamo, A.

    2009-01-01

    In the present study, a plutonium-thorium fuel cycle is investigated including the 233 U production and utilization. A prismatic thermal High Temperature Gas Reactor (HTGR) and the novel concept of quadruple isotropic (QUADRISO) coated particles, designed at the Argonne National Laboratory, have been used for the study. In absorbing QUADRISO particles, a burnable poison layer surrounds the central fuel kernel to flatten the reactivity curve as a function of time. At the beginning of life, the fuel in the QUADRISO particles is hidden from neutrons, since they get absorbed in the burnable poison before they reach the fuel kernel. Only when the burnable poison depletes, neutrons start streaming into the fuel kernel inducing fission reactions and compensating the fuel depletion of ordinary TRISO particles. In fertile QUADRISO particles, the absorber layer is replaced by natural thorium with the purpose of flattening the excess of reactivity by the thorium resonances and producing 233 U. The above configuration has been compared with a configuration where fissile (neptunium-plutonium oxide from Light Water Reactors irradiated fuel) and fertile (natural thorium oxide) fuels are homogeneously mixed in the kernel of ordinary TRISO particles. For the 233 U utilization, the core has been equipped with europium oxide absorbing QUADRISO particles.

  6. Nuclear reactor fuel assembly

    International Nuclear Information System (INIS)

    Sakurai, Shungo; Ogiya, Shunsuke.

    1990-01-01

    In a fuel assembly, if the entire fuels comprise mixed oxide fuels, reactivity change in cold temperature-power operation is increased to worsen the reactor shutdown margin. The reactor shutdown margin has been improved by increasing the burnable poison concentration thereby reducing the reactivity of the fuel assembly. However, since unburnt poisons are present at the completion of the reactor operation, the reactivity can not be utilized effectively to bring about economical disadvantage. In view of the above, the reactivity change between lower temperature-power operations is reduced by providing a non-boiling range with more than 9.1% of cross sectional area at the inside of a channel at the central portion of the fuel assembly. As a result, the amount of the unburnt burnable poisons is decreased, the economy of fuel assembly is improved and the reactor shutdown margin can be increase. (N.H.)

  7. Application of an enhanced cross-section interpolation model for highly poisoned LWR core calculations

    International Nuclear Information System (INIS)

    Palau, J.M.; Cathalau, S.; Hudelot, J.P.; Barran, F.; Bellanger, V.; Magnaud, C.; Moreau, F.

    2011-01-01

    Burnable poisons are extensively used by Light Water Reactor designers in order to preserve the fuel reactivity potential and increase the cycle length (without increasing the uranium enrichment). In the industrial two-steps (assembly 2D transport-core 3D diffusion) calculation schemes these heterogeneities yield to strong flux and cross-sections perturbations that have to be taken into account in the final 3D burn-up calculations. This paper presents the application of an enhanced cross-section interpolation model (implemented in the French CRONOS2 code) to LWR (highly poisoned) depleted core calculations. The principle is to use the absorbers (or actinide) concentrations as the new interpolation parameters instead of the standard local burnup/fluence parameters. It is shown by comparing the standard (burnup/fluence) and new (concentration) interpolation models and using the lattice transport code APOLLO2 as a numerical reference that reactivity and local reaction rate prediction of a 2x2 LWR assembly configuration (slab geometry) is significantly improved with the concentration interpolation model. Gains on reactivity and local power predictions (resp. more than 1000 pcm and 20 % discrepancy reduction compared to the reference APOLLO2 scheme) are obtained by using this model. In particular, when epithermal absorbers are inserted close to thermal poison the 'shadowing' ('screening') spectral effects occurring during control operations are much more correctly modeled by concentration parameters. Through this outstanding example it is highlighted that attention has to be paid to the choice of cross-section interpolation parameters (burnup 'indicator') in core calculations with few energy groups and variable geometries all along the irradiation cycle. Actually, this new model could be advantageously applied to steady-state and transient LWR heterogeneous core computational analysis dealing with strong spectral-history variations under

  8. First results on study of gadolinium as burnable absorber

    International Nuclear Information System (INIS)

    Abbate, Maximo J.; Sbaffoni, Maria M.

    2000-01-01

    Following on with the work included in the 'Burnable absorbers research plan' several experiments were carried out oriented to determine Ga 2 O 3 burn up. Cold tests were performed and samples were irradiated in the RA-3 reactor. In this paper, some calculated values are presented together with their comparisons with experimental ones. The parameters foreseen for performing the experiments were verified and also the predictions on burn up of uranium and gadolinium isotopes concentrations. These results imply that the nuclear data of these isotopes included in the library are satisfactory. Next steps will be to measure other isotopes concentrations, gamma spectrum, and the irradiation of one pellet to determine self shielding effects in order to obtain effective cross sections i.e. for CAREM geometry. (author)

  9. House of Poison: Poisons in the Home.

    Science.gov (United States)

    Keller, Rosanne

    One of a series of instructional materials produced by the Literacy Council of Alaska, this booklet provides information about common household poisons. Using a simplified vocabulary and shorter sentences, it provides statistics concerning accidental poisonings; a list of the places poisons are usually found in the home; steps to make the home…

  10. Poison Ivy Rash

    Science.gov (United States)

    Poison ivy rash Overview Poison ivy rash is caused by an allergic reaction to an oily resin called urushiol (u-ROO-she-ol). This oil is in the leaves, stems and roots of poison ivy, poison oak and poison sumac. Wash your ...

  11. Dieffenbachia poisoning

    Science.gov (United States)

    Dumbcane poisoning; Leopard lily poisoning; Tuft root poisoning ... Get the following information: Person's age, weight, and condition Parts of the plant that were eaten, if known Time swallowed Amount swallowed

  12. Optimization of core reload design for low leakage fuel management in pressurized water reactors

    International Nuclear Information System (INIS)

    Kim, Y.J.

    1986-01-01

    A new method was developed to optimize pressurized water reactor core reload design for low leakage fuel management, a strategy recently adopted by most utilities to extend cycle length and mitigate pressurized thermal shock concerns. The method consists of a two-stage optimization process which provides the maximum cycle length for a given fresh fuel loading subject to power peaking constraints. In the first stage, a best fuel arrangement is determined at the end of cycle in the absence of burnable poisons. A direct search method is employed in conjunction with a constant power, Haling depletion. In the second stage, the core control poison requirements are determined using a linear programming technique. The solution provides the fresh fuel burnable poison loading required to meet core power peaking constraints. An accurate method of explicitly modeling burnable absorbers was developed for this purpose. The design method developed here was implemented in a currently recognized fuel licensing code, SIMULATE, that was adapted to the CYBER-205 computer. This methodology was applied to core reload design of cycles 9 and 10 for the Commonwealth Edison Zion, Unit-1 Reactor. The results showed that the optimum loading pattern for cycle 9 yielded almost a 9% increase in the cycle length while reducing core vessel fluence by 30% compared with the reference design used by Commonwealth Edison

  13. Reference core design Mark-I and -II of the experimental, multi-purpose, high-temperature, gas-cooled reactor

    International Nuclear Information System (INIS)

    Shindo, Ryuiti; Hirano, Mitsumasa; Aruga, Takeo; Yasukawa, Sigeru

    1977-10-01

    Reactivity worth of the control rods and power distribution in the initial hot-clean core of reference core design Mark-I and -II have been studied. The need for burnable poison was confirmed, because of the limitations in number, diameter and reactivity worth of the control rods due to structures of pressure vessel and fuel element and to safety of the core. While the initial excess reactivity is reduced by use of the burnable poison, the recovery of core reactivity with burnup of the burnable poison requires a complicated withdrawal sequence of the control rods. The radial power gradient in the core is not large, due to orifice control of the coolant helium flow, effectiveness of the reflector in the small core and continuous distribution of burnup in the core by one-batch refuelling scheme. The local peaking factor in unit orifice regions, therefore, is the most important core design. Control of the axial power distribution is necessary to reduce the maximum fuel temperature and the exponential power distribution peaked toward the inlet of the core is most suitable. However, insertion of the control rods from top of the core disturbs the axial power distribution, so this effect must be considered in design of the withdrawal sequence of control rods. Nuclear properties of the core were revealed from results of the study for the initial hot-clean core. (auth.)

  14. Mistletoe poisoning

    Science.gov (United States)

    ... if known Time it was swallowed Amount swallowed Poison Control Your local poison center can be reached directly by calling the national toll-free Poison Help hotline (1-800-222-1222) from anywhere ...

  15. Detergent poisoning

    Science.gov (United States)

    ... if known) Time it was swallowed Amount swallowed Poison Control Your local poison center can be reached directly by calling the national toll-free Poison Help hotline (1-800-222-1222) from anywhere ...

  16. Kerosene poisoning

    Science.gov (United States)

    ... if known) Time it was swallowed Amount swallowed Poison Control Your local poison center can be reached directly by calling the national toll-free Poison Help hotline (1-800-222-1222) from anywhere ...

  17. Zinc poisoning

    Science.gov (United States)

    ... help if this information is not immediately available. Poison Control Your local poison center can be reached directly by calling the national toll-free Poison Help hotline (1-800-222-1222) from anywhere ...

  18. Foxglove poisoning

    Science.gov (United States)

    ... if known Time it was swallowed Amount swallowed Poison Control Your local poison center can be reached directly by calling the national toll-free Poison Help hotline (1-800-222-1222) from anywhere ...

  19. Cologne poisoning

    Science.gov (United States)

    ... the product Time it was swallowed Amount swallowed Poison Control Your local poison center can be reached directly by calling the national toll-free Poison Help hotline (1-800-222-1222) from anywhere ...

  20. Oleander poisoning

    Science.gov (United States)

    ... if known Time it was swallowed Amount swallowed Poison Control Your local poison center can be reached directly by calling the national toll-free Poison Help hotline (1-800-222-1222) from anywhere ...

  1. Ammonia poisoning

    Science.gov (United States)

    ... if known) Time it was swallowed Amount swallowed Poison Control Your local poison center can be reached directly by calling the national toll-free Poison Help hotline (1-800-222-1222) from anywhere ...

  2. Yew poisoning

    Science.gov (United States)

    ... if known Time it was swallowed Amount swallowed Poison Control Your local poison center can be reached directly by calling the national toll-free Poison Help hotline (1-800-222-1222) from anywhere ...

  3. Philodendron poisoning

    Science.gov (United States)

    ... if known Time it was swallowed Amount swallowed Poison Control Your local poison center can be reached directly by calling the national toll-free Poison Help hotline (1-800-222-1222) from anywhere ...

  4. Bee poison

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/article/002847.htm Bee poison To use the sharing features on this page, ... Time of the sting Location of the sting Poison Control Your local poison center can be reached ...

  5. Insecticide poisoning

    Science.gov (United States)

    ... if known) Time it was swallowed Amount swallowed Poison Control Your local poison control center can be reached directly by calling the national toll-free Poison Help hotline (1-800-222-1222) from anywhere ...

  6. Scombroid fish poisoning: an overlooked marine food poisoning.

    Science.gov (United States)

    Wu, M L; Yang, C C; Yang, G Y; Ger, J; Deng, J F

    1997-08-01

    Scombroid fish poisoning is a food-borne chemical intoxication caused by certain spoiled fish that contain a large amount of histamine and some biogenic diamines. It has gradually become a world-wide medical problem and probably is the most common cause of fish poisoning. As the data on the incidents of scombroid fish poisoning in Taiwan remains scarce, we report 2 incidents of scombroid fish poisoning in Northern Taiwan. We collected data of the 2 outbreaks of suspected fish poisoning which were reported to us in 1996. An epidemiological investigation was undertaken. Questionnaire interviews were given to persons who ate lunch in the same cafeteria in outbreak 2. The leftover fish were sent for species identification and toxin analysis. The first incident involving 4 women occurred in March 1996. All cases experienced flush, dizziness, blurred vision and skin rashes after eating lunch. A non-scombroid fish of Makaira with histamine levels as high as 84.13 mg/100 g flesh was implicated in this incident. In August 1996, another incident involving some cases who ate lunch at the same cafeteria were investigated. A total of 146 questionnaires were distributed with a return of 132 questionnaires (90.4%). Fifty-five employees reported positive signs or symptoms; 48 persons who ate fish and 7 women who did not eat fish were ill. Fish was the only food associated with the illness with an attack rate of 73.8% (p < 0.001). The incriminated fish was later identified as a scombroid fish of Euthynnus with a histamine content of 271.9 mg/100 g flesh in 1 leftover piece and 118.5 mg/100 g flesh in another piece. Most cases in these 2 outbreaks received treatment with antihistamines and had rapid and complete recovery. The diagnosis of scombroid fish poisoning could be misdiagnosed as food allergy or bacterial food poisoning if physicians are not aware of such poisoning. The nonspecific but characteristic symptomatology of histamine food poisoning and previous consumption of fish

  7. Poisoning

    Science.gov (United States)

    ... your home. Regularly test and replace the batteries. Poisoning treatment Treatment depends on the person and the type ... Injury Prevention, Prevention and Wellness, Staying HealthyTags: chemical ... poison treatments, snakebite, syrup of ipecac July 12, 2017 Featured ...

  8. The power of poison: pesticide poisoning of Africa's wildlife.

    Science.gov (United States)

    Ogada, Darcy L

    2014-08-01

    Poisons have long been used to kill wildlife throughout the world. An evolution has occurred from the use of plant- and animal-based toxins to synthetic pesticides to kill wildlife, a method that is silent, cheap, easy, and effective. The use of pesticides to poison wildlife began in southern Africa, and predator populations were widely targeted and eliminated. A steep increase has recently been observed in the intensity of wildlife poisonings, with corresponding population declines. However, the majority of poisonings go unreported. Under national laws, it is illegal to hunt wildlife using poisons in 83% of African countries. Pesticide regulations are inadequate, and enforcement of existing legislation is poor. Few countries have forensic field protocols, and most lack storage and testing facilities. Methods used to poison wildlife include baiting carcasses, soaking grains in pesticide solution, mixing pesticides to form salt licks, and tainting waterholes. Carbofuran is the most widely abused pesticide in Africa. Common reasons for poisoning are control of damage-causing animals, harvesting fish and bushmeat, harvesting animals for traditional medicine, poaching for wildlife products, and killing wildlife sentinels (e.g., vultures because their aerial circling alerts authorities to poachers' activities). Populations of scavengers, particularly vultures, have been decimated by poisoning. Recommendations include banning pesticides, improving pesticide regulations and controlling distribution, better enforcement and stiffer penalties for offenders, increasing international support and awareness, and developing regional pesticide centers. © 2014 New York Academy of Sciences.

  9. Feasibility study of the design of homogeneously mixed thorium-uranium oxide and all-uranium fueled reactor cores for civil nuclear marine propulsion - 15082

    International Nuclear Information System (INIS)

    Alam, S.B.; Lindley, B.A.; Parks, G.T.

    2015-01-01

    In this reactor physics study, we attempt to design a civil marine reactor core that can operate over a 10 effective-full-power-years life at 333 MWth using ThUO 2 and all-UO 2 fuel. We use WIMS to develop subassembly designs and PANTHER to examine whole-core arrangements, optimizing: subassembly and core geometry; fuel enrichment; burnable and moveable poison design; and whole-core loading patterns. We compare designs with a 14% fissile loading for ThUO 2 and all-UO 2 fuel in 13*13 assemblies with ZrB 2 integral fuel burnable absorber pins for reactivity control. Taking advantage of self-shielding effects, the ThUO 2 option shows greater promise in the final burnable poison design while maintaining low, stable reactivity with minimal burnup penalty. For the final poisoning design with ZrB 2 , ThUO 2 contributes 2.5% more initial reactivity suppression, although the all-UO 2 design exhibits lower reactivity swing. All the candidate materials show greater rod worth for the ThUO 2 design. For both fuels, B 4 C has the highest reactivity worth, providing 10% higher control rod worth for ThUO 2 fuel than all-UO 2 . Finally, optimized assemblies were loaded into a 3D reactor model in PANTHER. The PANTHER results show that after 10 years, the core is on the border of criticality, confirming the fissile loading is well-designed. (authors)

  10. Design of 50 MWe HTR-PBMR reactor core and nuclear power plant fuel using SRAC2006 programme

    International Nuclear Information System (INIS)

    Bima Caraka Putra; Yosaphat Sumardi; Yohannes Sardjono

    2014-01-01

    This research aims to assess the design of core and fuel of nuclear power plant type High Temperature Reactor-Pebble Bed Modular Reactor 50 MWe from the Beginning of Life (BOL) to Ending of life (EOL) with eight years operating life. The parameters that need to be analyzed in this research are the temperature distribution inside the core, quantity enrichment of U 235 , fuel composition, criticality, and temperature reactivity coefficient of the core. The research was conducted with a data set of core design parameters such as nuclides density, core and fuel dimensions, and the axial temperature distribution inside the core. Using SRAC2006 program package, the effective multiplication factor (k eff ) values obtained from the input data that has been prepared. The results show the value of the criticality of core is proportional to the addition of U 235 enrichment. The optimum enrichment obtained at 10.125% without the use of burnable poison with an excess reactivity of 3.1 2% at BOL. The addition Gd 2O3 obtained an optimum value of 12 ppm burnable poison with an excess reactivity 0.38 %. The use of Er 2O3 with an optimum value 290 ppm has an excess reactivity 1.24 % at BOL. The core temperature reactivity coefficient with and without the use of burnable poison has a negative values that indicates the nature of its inherent safety. (author)

  11. Poisoning - fish and shellfish

    Science.gov (United States)

    Fish poisoning; Dinoflagellate poisoning; Seafood contamination; Paralytic shellfish poisoning; Ciguatera poisoning ... algae and algae-like organisms called dinoflagellates. Small fish that eat the algae become contaminated. If larger ...

  12. Nuclear fuel assemblies

    International Nuclear Information System (INIS)

    Natori, Hisahide; Kurihara, Kunitoshi.

    1982-01-01

    Purpose: To increase the fuel safety by decreasing the gap conductance between fuels and cladding tubes, as well as improve the reactor core controllability by rendering the void coefficient negative. Constitution: Fuel assemblies in a pressure tube comprise a tie-rod, fuel rods in a central region, and fuel rods with burnable poison in the outer circumference region. Here, B 4 C is used as the burnable poison by 1.17 % by weight ratio. The degrees of enrichment for the fissile plutonium as PuO 2 -UO 2 fuel used in the assemblies are 2.7 %, 2.7 % and 1.5 % respectively in the innermost layer, the intermediate layer and the outermost layer. This increases the burn-up degree to improve the plant utilizability, whereby the void coefficient is rendered negative to improve the reactor core controllability. (Horiuchi, T.)

  13. Bug spray poisoning

    Science.gov (United States)

    ... was swallowed or inhaled Amount swallowed or inhaled Poison Control Your local poison center can be reached directly by calling the national toll-free Poison Help hotline (1-800-222-1222) from anywhere ...

  14. Poison Control Centers

    Science.gov (United States)

    ... 1222 immediately. Name State American Association of Poison Control Centers Address AAPCC Central Office NOT A POISON ... not for emergency use. Arkansas ASPCA Animal Poison Control Center Address 1717 S. Philo Road, Suite 36 Urbana, ...

  15. Computed phase equilibria for burnable neutron absorbing materials for advanced pressurized heavy water reactors

    Energy Technology Data Exchange (ETDEWEB)

    Corcoran, E.C. [Department of Chemistry and Chemical Engineering, Royal Military College of Canada, P.O. Box 17000, St. Forces, Kingston, Ont., K7K 7B4 (Canada)], E-mail: emily.corcoran@rmc.ca; Lewis, B.J.; Thompson, W.T. [Department of Chemistry and Chemical Engineering, Royal Military College of Canada, P.O. Box 17000, St. Forces, Kingston, Ont., K7K 7B4 (Canada); Hood, J. [Atomic Energy of Canada Ltd., Sheridan Park, 2251 Speakman Drive, Mississauga, Ont., L5K 1B2 (Canada); Akbari, F.; He, Z. [Atomic Energy of Canada Ltd., Chalk River Laboratories, Chalk River, Ont., K0J 1J0 (Canada); Reid, P. [Atomic Energy of Canada Ltd., Sheridan Park, 2251 Speakman Drive, Mississauga, Ont., L5K 1B2 (Canada)

    2009-03-31

    Burnable neutron absorbing materials are expected to be an integral part of the new fuel design for the Advanced CANDU [CANDU is as a registered trademark of Atomic Energy of Canada Limited.] Reactor. The neutron absorbing material is composed of gadolinia and dysprosia dissolved in an inert cubic-fluorite yttria-stabilized zirconia matrix. A thermodynamic model based on Gibbs energy minimization has been created to provide estimated phase equilibria as a function of composition and temperature. This work includes some supporting experimental studies involving X-ray diffraction.

  16. Analysis of intentional drug poisonings using Ohio Poison Control Center Data, 2002-2014.

    Science.gov (United States)

    Pringle, Kelsey; Caupp, Sarah; Shi, Junxin; Wheeler, Krista K; Spiller, Henry A; Casavant, Marcel J; Xiang, Henry

    2017-08-01

    Pharmaceutical drug poisonings, especially those that are intentional, are a serious problem for adolescents and young adults. Poison control center data is a viable tool to track intentional drug poisonings in near real-time. To determine intentional drug poisoning rates among adolescents and young adults in Ohio using poison control center data. We analyzed data from 2002 to 2014 obtained by Ohio's three poison control centers. Inclusion variables were calls made to the centers that had appropriate subject age (10-29 years old), subject sex, involved substance (all drug classes), and medical outcome (no effect, minor effect, moderate effect, major effect, and death). Intentional drug poisoning reports were also separated into subgroups to compare suspected suicide reports to misuse and abuse reports. Finally, resident population estimates were used to generate 2014 intentional drug poisoning rates for each county in Ohio. The most common age group for intentional drug poisonings was 18-24. Females reported more suspected suicide drug poisonings while males reported more misuse/abuse drug poisonings. The most reported drug class across all ages was analgesics. Of the 88 counties in Ohio, Hamilton, Williams, Washington, and Guernsey counties had the highest rates of intentional drug poisonings. The high report rate of suspected suicides and analgesic class drugs demonstrates the need for preventative measures for adolescents and young adults in Ohio. Any interventions, along with legislative changes, will need to take place in our local communities.

  17. Benzene poisoning

    Science.gov (United States)

    ... may be admitted to the hospital if the poisoning is severe. ... benzene they swallowed and how quickly they receive treatment. The ... Poisoning can cause rapid death. However, deaths have occurred ...

  18. Malathion poisoning

    Science.gov (United States)

    ... Prolonged treatment often is needed to reverse the poisoning. This may include staying in the hospital intensive care unit and getting long-term therapy. Some effects of the poison may last for ...

  19. Diazinon poisoning

    Science.gov (United States)

    ... Prolonged treatment often is needed to reverse the poisoning. This may include staying in the hospital intensive care unit and getting long-term therapy. Some effects of the poison may last for ...

  20. Using poison center exposure calls to predict methadone poisoning deaths.

    Directory of Open Access Journals (Sweden)

    Nabarun Dasgupta

    Full Text Available PURPOSE: There are more drug overdose deaths in the Untied States than motor vehicle fatalities. Yet the US vital statistics reporting system is of limited value because the data are delayed by four years. Poison centers report data within an hour of the event, but previous studies suggested a small proportion of poisoning deaths are reported to poison centers (PC. In an era of improved electronic surveillance capabilities, exposure calls to PCs may be an alternate indicator of trends in overdose mortality. METHODS: We used PC call counts for methadone that were reported to the Researched Abuse, Diversion and Addiction-Related Surveillance (RADARS® System in 2006 and 2007. US death certificate data were used to identify deaths due to methadone. Linear regression was used to quantify the relationship of deaths and poison center calls. RESULTS: Compared to decedents, poison center callers tended to be younger, more often female, at home and less likely to require medical attention. A strong association was found with PC calls and methadone mortality (b=0.88, se=0.42, t=9.5, df=1, p<0.0001, R(2 =0.77. These findings were robust to large changes in a sensitivity analysis assessing the impact of underreporting of methadone overdose deaths. CONCLUSIONS: Our results suggest that calls to poison centers for methadone are correlated with poisoning mortality as identified on death certificates. Calls received by poison centers may be used for timely surveillance of mortality due to methadone. In the midst of the prescription opioid overdose epidemic, electronic surveillance tools that report in real-time are powerful public health tools.

  1. Application of B{sub 4}C/Al{sub 2}O{sub 3} Burnable Absorber Rod to Control Excess Reactivity of SMR

    Energy Technology Data Exchange (ETDEWEB)

    Muth, Boravy; Hah, C. J. [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2016-10-15

    Soluble boron in a nuclear reactor coolant is one of the methods to control excess reactivity of the reactor. However, the use of soluble boron also causes some negative effects such as corrosion, more-positive tendency of Moderator Temperature Coefficient (MTC) and the requirement of Chemical Volume Control System (CVCS). One of the conceptual design features of SMR having been developed in Korea is soluble boron- free reactor to eliminate those drawbacks. Control rods and Burnable Absorber (BA) rods can be other methods than soluble to control excess reactivity. WABA (Wet Annular Burnable Absorber) and PYREX are such type. The other type is IFBA (Integral Fuel Burnable Absorber) in which fuel pellet surface is coated with BA. This paper compares nuclear characteristics of three types of BA as well as SLOBA in terms of k-infinite vs. burnup and explain design basis of SLOBA. This paper also presents the application of SLOBA rods to control long-term excess reactivity of SMR. The SMR loaded with SLOBA rods has been developed for the past few years in Korean. It is named as Bandi-50 with design features of 180 MWth, 37 FAs, fuel assembly height of 200 cm. Soluble-boron-free is one of nuclear design requirements of Bandi-50 and is achieved by controlling excess reactivity of the SMR using BAs and control rods only. To achieve this design requirement, LP is carefully determined in such way that CBC should be as low as possible. Fuel assembly cross-sections are generated by CASMO-3, and core depletion calculations are performed by MASTER.

  2. Poisoning in Israel: annual report of the Israel Poison Information Center, 2012.

    Science.gov (United States)

    Bentur, Yedidia; Lurie, Yael; Cahana, Alfred; Kovler, Nona; Bloom-Krasik, Anna; Gurevych, Bella; Klein-Schwartz, Wendy

    2014-11-01

    The Israel National Poison Information Center (IPIC), Rambam Health Care Campus, provides 24 hour telephone consultations in clinical toxicology as well as drug and teratogen information. It participates in research, teaching and regulatory activities, and also provides laboratory services. To report data on the epidemiology of poisonings and poison exposures in Israel. We made computerized queries and descriptive analyses of the medical records database of the IPIC during 2012. A total of 31,519 poison exposure cases were recorded, a 157.6% increase compared with 1995. Children snake venom. Four fatalities were recorded; all were intentional exposures in adults (corrosive, medications, energy drink). Poison exposures and poisonings have increased significantly and have contributed substantially to morbidity and mortality in Israel. The IPIC database is a valuable national resource for the collection and monitoring of poisoning exposure cases. It can be used as a real-time surveillance system for the benefit of public health. It is recommended that reporting to the IPIC become mandatory and its activities be adequately supported by national resources.

  3. Merthiolate poisoning

    Science.gov (United States)

    Merthiolate poisoning is difficult to treat. How well a person does depends on the amount of poison swallowed and how quickly treatment was received. The faster a person gets medical help, the better the chance for recovery. Kidney dialysis ( ...

  4. Diagnosis of acute poisoning | Tygerberg Poison Information Centre ...

    African Journals Online (AJOL)

    Continuing Medical Education. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 21, No 8 (2003) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. Diagnosis of acute poisoning. - Tygerberg Poison ...

  5. Beryllium poisonings

    International Nuclear Information System (INIS)

    Alibert, S.

    1959-03-01

    This note reports a bibliographical study of beryllium toxicity. Thus, this bibliographical review addresses and outlines aspects and issues like aetiology, cases of acute poisoning (cutaneous manifestations, pulmonary manifestations), chronic poisoning (cutaneous, pulmonary and bone manifestations), excretion and localisation, and prognosis

  6. Evaluation of poison information services provided by a new poison information center.

    Science.gov (United States)

    Churi, Shobha; Abraham, Lovin; Ramesh, M; Narahari, M G

    2013-01-01

    The aim of this study is to assess the nature and quality of services provided by poison information center established at a tertiary-care teaching hospital, Mysore. This was a prospective observational study. The poison information center was officially established in September 2010 and began its functioning thereafter. The center is equipped with required resources and facility (e.g., text books, Poisindex, Drugdex, toll free telephone service, internet and online services) to provide poison information services. The poison information services provided by the center were recorded in documentation forms. The documentation form consists of numerous sections to collect information on: (a) Type of population (children, adult, elderly or pregnant) (b) poisoning agents (c) route of exposure (d) type of poisoning (intentional, accidental or environmental) (e) demographic details of patient (age, gender and bodyweight) (f) enquirer details (background, place of call and mode of request) (g) category and purpose of query and (h) details of provided service (information provided, mode of provision, time taken to provide information and references consulted). The nature and quality of poison information services provided was assessed using a quality assessment checklist developed in accordance with DSE/World Health Organization guidelines. Chi-Square test (χ(2)). A total of 419 queries were received by the center. A majority (n = 333; 79.5%) of the queries were asked by the doctors to provide optimal care (n = 400; 95.5%). Most of the queries were received during ward rounds (n = 201; 48.0%), followed by direct access (n = 147; 35.1%). The poison information services were predominantly provided through verbal communication (n = 352; 84.0%). Upon receipt of queries, the required service was provided immediately (n = 103; 24.6%) or within 10-20 min (n = 296; 70.6%). The queries were mainly related to intentional poisoning (n = 258; 64.5%), followed by accidental poisoning

  7. Fuel assemblies for nuclear reactor

    International Nuclear Information System (INIS)

    Nishi, Akihito.

    1987-01-01

    Purpose: To control power-up rate at the initial burning stage of new fuel assemblies due to fuel exchange in a pressure tube type power reactor. Constitution: Burnable poisons are disposed to a most portion of fuel pellets in a fuel assembly to such a low concentration as the burn-up rate changes with time at the initial stage of the burning. The most portion means substantially more than one-half part of the pellets and gadolinia is used as burn-up poisons to be dispersed and the concentration is set to less than about 0.2 %. Upon elapse of about 15 days after the charging, the burnable poisons are eliminated and the infinite multiplication factors are about at 1.2 to attain a predetermined power state. Since the power-up rate of the nuclear reactor fuel assembly is about 0.1 % power/hour and the power-up rate of the fuel assembly around the exchanged channel is lower than that, it can be lowered sufficiently than the limit for the power-up rate practiced upon reactor start-up thereby enabling to replace fuels during power operation. (Horiuchi, T.)

  8. Standard specification for nuclear-grade aluminum oxide pellets

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2008-01-01

    1.1 This specification applies to pellets of aluminum oxide that may be ultimately used in a reactor core, for example, as filler or spacers within fuel, burnable poison, or control rods. In order to distinguish between the subject pellets and “burnable poison” pellets, it is established that the subject pellets are not intended to be used as neutron-absorbing material. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

  9. Evaluation of the in pile performance of boron containing fuel pellets

    International Nuclear Information System (INIS)

    Jeong, Gwanyoon; Sohn, Dongseong

    2012-01-01

    The world rare earth resource are heavily concentrated in certain area and if these natural resources are weaponized by a country, we may confront serious difficulty because rare earth element gadolinium(Gd) is used as burnable poison material in some nuclear power plants (NPP) in Korea. Gd is used as a neutron absorbing material in Gd 2 O 3 form and mixed with UO 2 When boron is used as burnable poison in nuclear fuel, in fuel pellets. The burnable poison mixed in the fuel pellets is called integral burnable absorber (BA) design which differentiates it from the old separate BA design. In the old separate BA design, boron(B) was used in borosilicate glass (PYREX) form and placed in guide tubes. With the development of the concern over the availability of rare earth material Gd, B is considered as a candidate material replacing Gd for the case when the rare earth material is weaponized. However the idea for new boron BA design is integral type because the integral type BA design has several benefits over the separate BA design, such as reduction of radioactive waste, more positions for BA location, etc. 10 B absorbs a neutron and produces helium by the following reaction: 10 B + n → 7 Li + 4 He The helium produced by the nuclear reaction may cause the increase of rod internal pressure and change the gap conductivity if the significant amount of helium gas is released to the gap between the pellet and the cladding. Thus, it is necessary to investigate the in-pile behaviors of B containing pellet. However, few experiment have been carried out so far on the behavior of in-pile produced helium in UO 2 fuel pellets, especially for the cases boron compound is mixed with UO 2 In this paper, we will evaluate the production and the release of helium depending on fuel. 10 B concentration in the fuel

  10. Study of low leakage reload schedulle without burnable posion for Angra-1

    International Nuclear Information System (INIS)

    Sakai, M.; Dias, A.

    1989-01-01

    At the moment, there is a world trend to design larger cycles for PWR. Then the reload batches are increased, the enrichment in 235 U is increased and/or advanced fuel management strategies with radial low neutron leakage are applied. For the low leakage reloads of Angra-1 calculations were performed for different number of fuel assemblies for reaload batch, 32,36,40,44 and 48, from the 4th cycle up to equilibrium cycle for two different enrichments 3,4 W/O and 3,9 W/O in 235 U. The results showed that for the enrichments used without burnable posion it is possible to reach an increase in cycle lenghts between 3% and 8% for the same conditions. (author) [pt

  11. Corrosion of gadolinium aluminate-aluminium oxide samples in fully desalinated water at 575 K

    International Nuclear Information System (INIS)

    Hattenbach, K.; Zimmermann, H.U.

    1978-07-01

    Corrosion tests have been carried out for 1 1/2 years on gadolinium aluminate/aluminium oxide samples (burnable poison for ship propulsion reactors) with and without cans at 575 K in fully desalinated water. It was found that this substance is highly corrosion-resistant. (orig./HP) [de

  12. Lead Poisoning (For Parents)

    Science.gov (United States)

    ... Staying Safe Videos for Educators Search English Español Lead Poisoning KidsHealth / For Parents / Lead Poisoning What's in ... Print en español La intoxicación por plomo About Lead Poisoning If you have young kids, it's important ...

  13. Technical verification of advanced nuclear fuel for KSNPs

    International Nuclear Information System (INIS)

    Lee, C. B.; Bang, J. G.; Kim, D. H. and others

    2002-03-01

    KNFC has developed the advanced 16x16 fuel assembly for the Korean Standard Nuclear Plants through the three-year R and D project (from April 1999 to March 2002) under the Nuclear R and D program by MOST. The purpose of this project is to verify the advanced 16x16 fuel assembly for the Korean Standard Nuclear Plants being developed by KNFC during the same period. Verification tests for the advanced fuel assembly and its components such as characteristic test on the spacer grid spring and dimple, static buckling and dynamic impact test on the 5x5 partial spacer grid, the fuel rod vibration test supported by the PLUS7 mid-spacer grid, fretting wear test, turbulent flow structure test in wind tunnel and corrosion test were performed by using the KAERI facilities. Design reports and test results produced by KNFC were technically reviewed. For the domestic production of burnable poison rod, manufacturing technology of burnable poison pellets was developed

  14. Tropical fish poisoning in temperate climates: food poisoning from ciguatera toxin presenting in Avonmouth.

    Science.gov (United States)

    Kipping, Ruth; Eastcott, Howard; Sarangi, Joyshri

    2006-12-01

    Ciguatera toxin causes a range of gastrointestinal, cardiovascular and neurological symptoms that occur within 1-6 h of ingesting fish with the toxin and can last for days, months or years. It is a well-recognized problem in the tropics. Avon Health Protection Team investigated food poisoning on a ship at Avonmouth, which was thought by the crew to be related to a white snapper fish from the Caribbean. The symptoms were initially thought to be scombroid fish poisoning but were consistent with ciguatera fish poisoning. Cases of fish poisoning from fish imported from the Caribbean and Pacific or travellers returning from tropical countries may be ciguatera fish poisoning, but mistakenly diagnosed as scombroid fish poisoning.

  15. Extracorporeal Treatment for Lithium Poisoning

    DEFF Research Database (Denmark)

    Decker, Brian S; Goldfarb, David S; Dargan, Paul I

    2015-01-01

    The Extracorporeal Treatments in Poisoning Workgroup was created to provide evidence-based recommendations on the use of extracorporeal treatments in poisoning. Here, the EXTRIP workgroup presents its recommendations for lithium poisoning. After a systematic literature search, clinical and toxico......The Extracorporeal Treatments in Poisoning Workgroup was created to provide evidence-based recommendations on the use of extracorporeal treatments in poisoning. Here, the EXTRIP workgroup presents its recommendations for lithium poisoning. After a systematic literature search, clinical...... extraction of patient-level data. The workgroup concluded that lithium is dialyzable (Level of evidence=A) and made the following recommendations: Extracorporeal treatment is recommended in severe lithium poisoning (1D). Extracorporeal treatment is recommended if kidney function is impaired and the [Li...... treatment (1D), but continuous RRT is an acceptable alternative (1D). The workgroup supported the use of extracorporeal treatment in severe lithium poisoning. Clinical decisions on when to use extracorporeal treatment should take into account the [Li(+)], kidney function, pattern of lithium toxicity...

  16. Pick your poison: what's new in poison control for the preschooler.

    Science.gov (United States)

    Glenn, Lauren

    2015-01-01

    Accidental childhood poisonings are a major public health concern despite many efforts to alleviate this problem. While the rate of pediatric fatalities due to poisonings have decreased over the last two decades, poison control centers around the US have collectively fielded over one million calls with regard to toxic exposures in the preschool age group. According to the American Association of Poison Control Centers nearly half of all human exposures reported last year involved children under six. By focusing poison prevention efforts on the preschooler, we can attempt to decrease morbidity and mortality in the most vulnerable age group affected. Although the subject is still prevalent, current discussion on this topic is limited. Newer literature discusses past initiatives such as child resistant packaging and sticker deterrent programs and addresses their efficacy. This article revisits older mechanisms of prevention as well as the science behind the human motivation to change one's own practice and behavior. Copyright © 2015 Elsevier Inc. All rights reserved.

  17. Comparison of poisonings managed at military and Veterans Administration hospitals reported to Texas poison centers.

    Science.gov (United States)

    Forrester, M B

    2017-01-01

    There is little information on poisonings managed at military and Veterans Administration (VA) hospitals. This investigation described and compared poisonings reported to Texas poison centers that were managed at military and VA hospitals. Retrospective analysis of poison centre data. Cases were poisonings among patients aged 18 years or more reported to Texas poison centers during 2000-2015 where management occurred at a military or VA hospital. The distribution of exposures for various demographic and clinical factors was determined for military and veterans hospitals and comparisons were made between the two groups. There were 4353 and 1676 poisonings managed at military and VA hospitals, resepctively. Males accounted for 50.5% of the military hospital patients and 84.9% of the VA hospital patients. The mean age for military hospital patients was 31 years and for VA hospital patients was 50 years. The proportion of poisonings managed at military hospitals and VA hospitals, respectively, were intentional (70.0% vs 64.1%), particularly suspected attempted suicide (57.3% vs 47.7%), and unintentional (25.0% vs 30.5%). More than one substance was reported in 37.7% of military and 33.2% of VA hospital poisonings. The most commonly reported substance categories for poisonings managed at military and VA hospitals, respectively, were analgesics (28.4% vs 19.7%), sedatives/hypnotics/antipsychotics (24.7% vs 23.4%), antidepressants (18.7% vs 19.7%) and alcohol (11.3% vs 10.6%). A number of differences were observed between poisonings managed at military and VA hospitals. These differing patterns of poisonings may need to be taken into account in the education, prevention and treatment of poisonings at these hospitals and among the populations they serve. Copyright © 2016 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

  18. Poison control services in China

    International Nuclear Information System (INIS)

    Wu Yiqun; Sun Chengye

    2004-01-01

    The following aspects are discussed: the public health problems of acute poisoning in China in recent years; the characteristics of acute poisoning; the negative effects of poison cases on the society and economy. The four stages of development of a poison control system in China are: (1) clinical hospital as the only facility used for detoxification; (2) institutes and hospitals of occupational medicine got involved in the program; (3) the traditional model of poison control changed to the modern National Poison Control Center (NPCC), and its network got established and it began to play a key role; (4) establishment of a multi-disciplinary network for dealing with emergencies in which chemical poison control is an important component. Introduction of the operations of the NPCC: the functions of the center are a 24 h hotline service, clinical consultants service, poison identification and diagnosis, laboratory analysis, education for public, training for physicians, coordination of anti-dotes, and the development of a network of poison control centers for dealing with chemical emergencies. The work practice and achievement of NPCC and its network in the field of poison control during the last 3 years is discussed. Lessons from SARS infection: to extend the network, to strengthen multi-disciplinary cooperation, enhance communication between centers, to pay attention to capacity building, to improve reporting systems, and to share resources

  19. [Plant poisoning cases in Turkey].

    Science.gov (United States)

    Oztekin-Mat, A

    1994-01-01

    In Turkey, the majority of the population live in rural areas where they use wild plants as food and medicine. The confusion of an edible plant with a poisonous one give rise to serious poisoning which may even result in death. The incidence of plant poisoning in Turkey is about 6% and especially high among children between ages of 2 and 11 living in rural areas. The number of species that cause poisoning is around twenty and Hyoscyamus niger (Solanaceae), Colchicum species (Liliaceae), Conium maculatum (Umbelliferae) and Prunus species (Rosaceae) are the most important. Mushroom poisoning is more frequent in spring and fall. The main reasons are their widespread usage as food and the inexperience of the gatherers in distinguishing the edibles from the poisonous. Amanita phalloides, A. verna, A. muscaria, A. pantherina are responsible for severe cases of poisoning.

  20. Mercuric chloride poisoning

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/article/002474.htm Mercuric chloride poisoning To use the sharing features on this page, please enable JavaScript. Mercuric chloride is a very poisonous form of mercury. It ...

  1. Hair straightener poisoning

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/002706.htm Hair straightener poisoning To use the sharing features on this page, please enable JavaScript. Hair straightener poisoning occurs when someone swallows products that ...

  2. Hair spray poisoning

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/002705.htm Hair spray poisoning To use the sharing features on this page, please enable JavaScript. Hair spray poisoning occurs when someone breathes in (inhales) ...

  3. Determinants of U.S. poison center utilization.

    Science.gov (United States)

    Litovitz, Toby; Benson, Blaine E; Youniss, Jessica; Metz, Edward

    2010-06-01

    High poison center utilization has been associated with decreased emergency department usage and hospitalization rates. However, utilization requires awareness of the poison center. Penetrance, defined as the number of human poison exposures reported to a poison center per 1,000 population, has been used as a marker of poison center awareness. To identify factors that influence poison center penetrance to optimize the life- and cost-saving benefits of poison control centers. Human poison exposures that were reported to the National Poison Data System in 2001 were analyzed to identify and rank factors affecting poison center penetrance. Overall penetrance correlated with pediatric penetrance (R(2) = 0.75, p poison center that were already in or en route to a healthcare facility at the time of the call to the poison center (R(2) = 0.41, p poison center service populations were associated with lower penetrance (R(2) = 0.23, p poison center (multiple regression). Positive predictors included the percentage of the population younger than 5 years, the percentage of the adult population with a bachelor's degree, poison center certification, poison center educator FTEs (full time equivalents), Asian population percentage, and population density. The inverse correlation between pediatric penetrance and healthcare facility utilization supports prior observations of excessive healthcare utilization when a poison center is not called. Since race, language and distance are barriers to poison center utilization, and since healthcare utilization increases when poison center penetrance declines, low penetrance suggests a lack of awareness of the poison center rather than a low incidence of poisonings. Strategies to raise penetrance should be informed by an understanding of the barriers to utilization - language, Black/African American race, distance from the poison center, poverty, and lower education levels.

  4. Black-spot poison ivy.

    Science.gov (United States)

    Schram, Sarah E; Willey, Andrea; Lee, Peter K; Bohjanen, Kimberly A; Warshaw, Erin M

    2008-01-01

    In black-spot poison ivy dermatitis, a black lacquerlike substance forms on the skin when poison ivy resin is exposed to air. Although the Toxicodendron group of plants is estimated to be the most common cause of allergic contact dermatitis in the United States, black-spot poison ivy dermatitis is relatively rare.

  5. Poisoning first aid

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/article/007579.htm Poisoning first aid To use the sharing features on this page, ... burns Stupor Unconsciousness (coma) Unusual breath odor Weakness First Aid Seek immediate medical help. For poisoning by swallowing ...

  6. Isopropanol alcohol poisoning

    Science.gov (United States)

    Rubbing alcohol poisoning; Isopropyl alcohol poisoning ... Isopropyl alcohol can be harmful if it is swallowed or gets in the eyes. ... These products contain isopropanol: Alcohol swabs Cleaning supplies ... Rubbing alcohol Other products may also contain isopropanol.

  7. Hydrochloric acid poisoning

    Science.gov (United States)

    Hydrochloric acid is a clear, poisonous liquid. It is highly corrosive, which means it immediately causes severe damage, such ... poisoning due to swallowing or breathing in hydrochloric acid. This article is for information only. Do NOT ...

  8. Mercurial poisoning

    Energy Technology Data Exchange (ETDEWEB)

    Gorton, B

    1924-01-01

    Cats which had been kept in a thermometer factory to catch rats were afflicted with mercury poisoning. So were the rats they were supposed to eat. The symptoms of mercury poisoning were the same in both species. The source of mercury for these animals is a fine film of the metal which coats floors, a result of accidental spills during the manufacturing process.

  9. Gaseous poison injection device

    International Nuclear Information System (INIS)

    Kubota, Ryuji; Sugisaki, Toshihiko; Inada, Ikuo.

    1983-01-01

    Purpose: To rapidly control the chain reaction due to thermal neutrons in a reactor core by using gaseous poisons as back-up means for control rod drives. Constitution: Gaseous poisons having a large neutron absorption cross section are used as back-up means for control rod drives. Upon failure of control rod insertion, the gaseous poisons are injected into the lower portion of the reactor core to control the reactor power. As the gaseous poisons, vapors at a high temperature and a higher pressure than that of the coolants in the reactor core are injected to control the reactor power due to the void effects. Since the gaseous poisons thus employed rapidly reach the reactor core and form gas bubbles therein, the deccelerating effect of the thermal neutrons is decreased to reduce the chain reaction. (Moriyama, K.)

  10. Chelation Therapy for Mercury Poisoning

    Directory of Open Access Journals (Sweden)

    Rong Guan

    2009-01-01

    Full Text Available Chelation therapy has been the major treatment for heavy metal poisoning. Various chelating agents have been developed and tested for treatment of heavy metal intoxications, including mercury poisoning. It has been clearly shown that chelating agents could rescue the toxicity caused by heavy metal intoxication, but the potential preventive role of chelating agents against heavy metal poisoning has not been explored much. Recent paper by Siddiqi and colleagues has suggested a protective role of chelating agents against mercury poisoning, which provides a promising research direction for broader application of chelation therapy in prevention and treatment of mercury poisoning.

  11. Genetic algorithm for the optimization of the loading pattern for reactor core fuel management

    International Nuclear Information System (INIS)

    Zhou Sheng; Hu Yongming; zheng Wenxiang

    2000-01-01

    The paper discusses the application of a genetic algorithm to the optimization of the loading pattern for in-core fuel management with the NP characteristics. The algorithm develops a matrix model for the fuel assembly loading pattern. The burnable poisons matrix was assigned randomly considering the distributed nature of the poisons. A method based on the traveling salesman problem was used to solve the problem. A integrated code for in-core fuel management was formed by combining this code with a reactor physics code

  12. Extracorporeal treatment for thallium poisoning

    DEFF Research Database (Denmark)

    Ghannoum, Marc; Nolin, Thomas D; Goldfarb, David S

    2012-01-01

    The EXtracorporeal TReatments In Poisoning (EXTRIP) workgroup was formed to provide recommendations on the use of extracorporeal treatment (ECTR) in poisoning. To test and validate its methods, the workgroup reviewed data for thallium (Tl).......The EXtracorporeal TReatments In Poisoning (EXTRIP) workgroup was formed to provide recommendations on the use of extracorporeal treatment (ECTR) in poisoning. To test and validate its methods, the workgroup reviewed data for thallium (Tl)....

  13. [Electronic poison information management system].

    Science.gov (United States)

    Kabata, Piotr; Waldman, Wojciech; Kaletha, Krystian; Sein Anand, Jacek

    2013-01-01

    We describe deployment of electronic toxicological information database in poison control center of Pomeranian Center of Toxicology. System was based on Google Apps technology, by Google Inc., using electronic, web-based forms and data tables. During first 6 months from system deployment, we used it to archive 1471 poisoning cases, prepare monthly poisoning reports and facilitate statistical analysis of data. Electronic database usage made Poison Center work much easier.

  14. Carbon Monoxide Poisoning

    Directory of Open Access Journals (Sweden)

    Kamal Mishra

    2016-01-01

    Full Text Available Introduction: Carbon monoxide is known as the silent killer, being colorless, odourless, and tasteless. Initially non-irritating, it is very difficult for people to detect Carbon monoxide is a product of incomplete combustion of organic matter due to insufficient oxygen supply that prevents complete oxidation of carbon to C02. During World War II, Nazis used gas vans to kill an estimated over 700,000 prisoners by carbon monoxide poisoning. This method was also used in the gas chambers ofseveral death camps. The true number of incidents of carbon monoxide poisoning is unknown, since many non-lethal exposures go undetected From the available data, carbon monoxide poisoning is the most common cause of injury and death due to poisoning worldwide. Clinical features and management: The signs of carbon monoxide poisoning vary with concentration and length of exposure. Subtle cardiovascular or neurobehavioural effects occur at low concentration. The onset of chronic poisoning is usually insidious and easily mistaken for viral prodrome, depression, or gastroenteritis in children. The classic sign of carbon monoxide poisoning which is actually more often seen in the dead than the living is appearing red-cheeked and healthy. Cherry pink colour develops in nails, skin and mucosa. In acute poisoning, common abnormalities of posture and tone are cogwheel rigidity, opisthotonus, spasticity or flaccidity and seizures. Retinal haemorrhages and the classic cherry red skin colour are seldom seen. Different people andpopulations may have different carbon monoxide tolerance levels. On average, exposures at 100ppm or greater is dangerous to human health. Treatment and prevention: The mainstay of treatment is 100% oxygen administration until the COHb level is normal When the patient is stable enough to be transported, hyperbaric oxygen (HBOT should be considered This treatment is safe and well tolerated Public education about the danger of carbon monoxide, with

  15. Amnesic Shellfish Poisoning

    Science.gov (United States)

    ... Since then, the death or stranding of other marine animals, including whales, has been suspected or confirmed to ... sickened or die due to domoic acid poisoning. Animals poisoned by domoic acid include seabirds and marine mammals, including sea lions, sea otters, whales. Domoic- ...

  16. Lithium Poisoning

    DEFF Research Database (Denmark)

    Baird-Gunning, Jonathan; Lea-Henry, Tom; Hoegberg, Lotte C G

    2017-01-01

    Lithium is a commonly prescribed treatment for bipolar affective disorder. However, treatment is complicated by lithium's narrow therapeutic index and the influence of kidney function, both of which increase the risk of toxicity. Therefore, careful attention to dosing, monitoring, and titration...... is required. The cause of lithium poisoning influences treatment and 3 patterns are described: acute, acute-on-chronic, and chronic. Chronic poisoning is the most common etiology, is usually unintentional, and results from lithium intake exceeding elimination. This is most commonly due to impaired kidney...... function caused by volume depletion from lithium-induced nephrogenic diabetes insipidus or intercurrent illnesses and is also drug-induced. Lithium poisoning can affect multiple organs; however, the primary site of toxicity is the central nervous system and clinical manifestations vary from asymptomatic...

  17. Phosphorus poisoning in waterfowl

    Science.gov (United States)

    Coburn, D.R.; DeWitt, J.B.; Derby, J.V.; Ediger, E.

    1950-01-01

    Black ducks and mallards were found to be highly susceptible to phosphorus poisoning. 3 mg. of white phosphorus per kg. of body weight given in a single dose resulted in death of a black duck in 6 hours. Pathologic changes in both acute and chronic poisoning were studied. Data are presented showing that diagnosis can be made accurately by chemical analysis of stored tissues in cases of phosphorus poisoning.

  18. Carbon Monoxide (CO) Poisoning Prevention

    Science.gov (United States)

    ... family by acting wisely in case of a power outage and learning the symptoms of CO poisoning. How to Recognize CO Poisoning The most common symptoms of CO poisoning are headache, dizziness, weakness, nausea, vomiting, chest pain, and confusion. People who are sleeping or who ...

  19. Copper sulphate poisoning in horses

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, M

    1975-01-01

    In the archives of the Clinic for Internal Diseases of Domestic Animals at the Veterinary Faculty of Zagreb University some thirty cases of horse disease diagnosed as copper sulphate poisoning were noted. The data correspond in many respects to the clinical findings of copper sulphate poisoning in other domestic animals. A series of experimental horse poisonings were undertaken in order to determine the toxicity of copper sulphate. The research results are as follows: Horses are sensitive to copper sulphate. Even a single application of 0.125 g/kg body weight in 1% concentration by means of incubation into the stomach causes stomach and gut disturbances and other poisoning symptoms. Poisoning occurs in two types: acute and chronic. The former appears after one to three applications of copper sulphate solution and is characterized by gastroenteritis, haemolysis, jaundice and haemoglobinuria with signs of consecutive damage of kidney, liver and other organs. The disease, from the first application to death lasts for two weeks. Chronic poisoning is caused by ingestion of dry copper sulphate in food (1% solution dried on hay or clover) for two or more months. There are chronic disturbances of stomach and gut and loss of weight, and consecutive (three to four) haemolytic crises similar to those of acute poisoning. From the beginning of poisoning to death six or more months can elapse.

  20. What is the definition of a poisoning?

    Science.gov (United States)

    Uges, D R

    2001-03-01

    New insights in medicine and acceptable treatments necessitates an adjustment of the existing definition of clinical or forensic poisoning to: 'An individual's medical or social unacceptable condition as a consequence of being under influence of an exogenous substance in a dose too high for the person concerned'. For medical and legal purposes it is important to know how the victim became poisoned. In general, there are three ways of causing medical poisoning: accidental poisoning, including iatrogenic poisoning, experimental and intentional poisoning. Nowadays iatrogenic intoxication, poisoning caused by the Münchhausen's syndrome (by proxy) and experimental poisoning (designer drugs) have a major place in contemporary toxicology. Although some toxicologists use the word 'intoxication' only overdoses with central effects, in this article 'intoxication' and 'poisoning' are considered to be synonymous.

  1. Interaction between aluminium oxide pellets and Zircaloy tubes in steam atmospheres at temperatures above 12000C

    International Nuclear Information System (INIS)

    Hagen, S.; Hofmann, P.; Schanz, G.; Sepold, L.

    1988-09-01

    The burnable poison rods in light water reactors (LWR) consist of Al 2 O 3 /B 4 C pellets surrounded by Zircaloy-4 cladding tubes. In the Al 2 O 3 /B 4 C pellets of a LWR rod alumina is the main constituent (98.6 wt.-%) whereas boron carbide acts as neutron absorber. Failure of the Al 2 O 3 /Zircaloy test rods started at 1350 0 C when first droplets of molten material were observed running down the test bundle forming bundle blockages upon solidification. Post test examinations revealed that the process of liquefaction was initiated by a reduction of alumina by Zircaloy resulting in a (Zr, Al, O) melt which decomposed on cooldown into two metallic phases, a (Zr, Al) alloy and oxygen-stabilized a-Zr(O). The components of an extremely porous ceramic melt were also Zr, Al, and oxygen but with a higher oxygen content compared to the metallic melt. The ceramic melt decomposes on cooldown into an Al 2 O 3 /ZrO 2 eutectic with various amounts of primary constituents. Other types of relocated material were due to melting of essentially unreacted Zircaloy cladding and to debris formation by fracturing of oxidized cladding and Al 2 O 3 pellets stack residues. The interactions between Al 2 O 3 and Zircaloy occurring in a burnable poison rod are furthermore important for the behavior of the entire LWR core because the generated metals are able to attack the UO 2 chemically and dissolve or liquefy the fuel even below the melting point of Zircaloy (1760 0 C). As a result, fuel elements which contain burnable poison rods are expected to fail under severe accident conditions at about 1500 0 C. (orig./HP) [de

  2. A new method to measure the U-235 content in fresh LWR fuel assemblies via fast-neutron passive self-interrogation

    Science.gov (United States)

    Menlove, Howard; Belian, Anthony; Geist, William; Rael, Carlos

    2018-01-01

    The purpose of this paper is to provide a solution to a decades old safeguards problem in the verification of the fissile concentration in fresh light water reactor (LWR) fuel assemblies. The problem is that the burnable poison (e.g. Gd2O3) addition to the fuel rods decreases the active neutron assay for the fuel assemblies. This paper presents a new innovative method for the verification of the 235U linear mass density in fresh LEU fuel assemblies that is insensitive to the burnable poison content. The technique makes use of the 238U atoms in the fuel rods to self-interrogate the 235U mass. The innovation for the new approach is that the 238U spontaneous fission (SF) neutrons from the rods induces fission reactions (IF) in the 235U that are time correlated with the SF source neutrons. Thus, the coincidence gate counting rate benefits from both the nu-bar of the 238U SF (2.07) and the 235U IF (2.44) for a fraction of the IF reactions. Whereas, the 238U SF background has no time-correlation boost. The higher the detection efficiency, the higher the correlated boost because background neutron counts from the SF are being converted to signal doubles. This time-correlation in the IF signal increases signal/background ratio that provides a good precision for the net signal from the 235U mass. The hard neutron energy spectrum makes the technique insensitive to the burnable poison loading where a Cd or Gd liner on the detector walls is used to prevent thermal-neutron reflection back into the fuel assembly from the detector. We have named the system the fast-neutron passive collar (FNPC).

  3. A Rare but Potentially Fatal Poisoning; Aluminum Phosphide Poisoning

    Directory of Open Access Journals (Sweden)

    Orkun Tolunay

    2017-04-01

    Full Text Available Phosphide, a very toxic gas, is used in our country as aluminium phosphide tablets impregnated in clay. It is widely used since it has a very high diffusion capacity, whereby it can eradicate all living creatures in any form of their life cycle and does not leave any remnants in agricultural products. Aluminum phosphide poisoning is among intoxications for which there are still no true antidotes. Mortality rate varies between 30% and 100%. This paper presents a case of aluminum phosphide poisoning caused by the uncompleted suicide attempt. A 14-year-old girl, who swallowed aluminum phosphate tablets, was brought to the emergency department with the complaints of nausea and vomiting. The patient was treated with gastric lavage and activated charcoal. Since the patient ingested a lethal amount of aluminum phosphide, she was referred to the pediatric intensive care unit. The patient was discharged in stable condition after supportive care and monitoring. Specific antidotes are life-saving in poisonings. However, this case was presented to show how general treatment principles and quick access to health services affect the result of treatment. Also, we aimed to highlight the uncontrolled selling of aluminum phosphate, which results in high mortality rates in case of poisoning.

  4. Poisoning - Multiple Languages

    Science.gov (United States)

    ... Well-Being 6 - Poison Safety - Amarɨñña / አማርኛ (Amharic) MP3 Siloam Family Health Center Arabic (العربية) Expand Section ... Well-Being 6 - Poison Safety - myanma bhasa (Burmese) MP3 Siloam Family Health Center Dari (دری) Expand Section ...

  5. 49 CFR 172.430 - POISON label.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false POISON label. 172.430 Section 172.430... SECURITY PLANS Labeling § 172.430 POISON label. (a) Except for size and color, the POISON label must be as follows: EC02MR91.029 (b) In addition to complying with § 172.407, the background on the POISON label must...

  6. 49 CFR 172.554 - POISON placard.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false POISON placard. 172.554 Section 172.554... SECURITY PLANS Placarding § 172.554 POISON placard. (a) Except for size and color, the POISON placard must be as follows: EC02MR91.057 (b) In addition to complying with § 172.519, the background on the POISON...

  7. Numerical study of optimal equilibrium cycles for pressurized water reactors

    International Nuclear Information System (INIS)

    Mahlers, Y.P.

    2003-01-01

    An algorithm based on simulated annealing and successive linear programming is applied to solve equilibrium cycle optimization problems for pressurized water reactors. In these problems, the core reload scheme is represented by discrete variables, while the cycle length as well as uranium enrichment and loading of burnable poison in each feed fuel assembly are treated as continuous variables. The enrichments are considered to be distinct in all feed fuel assemblies. The number of batches and their sizes are not fixed and also determined by the algorithm. An important feature of the algorithm is that all the parameters are determined by the solution of one optimization problem including both discrete and continuous variables. To search for the best reload scheme, simulated annealing is used. The optimum cycle length as well as uranium enrichment and loading of burnable poison in each feed fuel assembly are determined for each reload pattern examined using successive linear programming. Numerical results of equilibrium cycle optimization for various values of the effective price of electricity and fuel reprocessing cost are studied

  8. Extracorporeal treatment for barbiturate poisoning

    DEFF Research Database (Denmark)

    Mactier, Robert; Laliberté, Martin; Mardini, Joelle

    2014-01-01

    The EXTRIP (Extracorporeal Treatments in Poisoning) Workgroup conducted a systematic review of barbiturate poisoning using a standardized evidence-based process to provide recommendations on the use of extracorporeal treatment (ECTR) in patients with barbiturate poisoning. The authors reviewed all...... treatment should be continued during ECTR. (4) Cessation of ECTR is indicated when clinical improvement is apparent. This report provides detailed descriptions of the rationale for all recommendations. In summary, patients with long-acting barbiturate poisoning should be treated with ECTR provided at least......-acting barbiturates are dialyzable and short-acting barbiturates are moderately dialyzable. Four key recommendations were made. (1) The use of ECTR should be restricted to cases of severe long-acting barbiturate poisoning. (2) The indications for ECTR in this setting are the presence of prolonged coma, respiratory...

  9. Bubble bath soap poisoning

    Science.gov (United States)

    ... medlineplus.gov/ency/article/002762.htm Bubble bath soap poisoning To use the sharing features on this page, please enable JavaScript. Bubble bath soap poisoning occurs when someone swallows bubble bath soap. ...

  10. CIGUATERA POISONING: PACIFIC DISEASE, FOODBORNE POISONING FROM FISH IN WARM SEAS AND OCEANS. Review

    Directory of Open Access Journals (Sweden)

    Snezha Zlateva

    2017-02-01

    Full Text Available Purpose: The review is provoked because of lack of awareness of the medical practitioners in Bulgaria concerning of the ethnology, pathogenesis, clinical symptoms and treatment of the ciguatera fish poisoning (CFP. This can be a source of prolonged diagnostic delays, as some cases reporting in another country in Europe, for example Germany, Spain and UK. Varna is the sea town with many sailor crews returning from tropical and subtropical regions, or CFP can affect people who travel to the Pacific and Caribbean or ate exotic fish from supermarket. The information of this fish food-borne poisoning is part of student’s education in discipline “Marine medicine” in Medical University, Varna. Materials and methods: To present better information from different authors and last scientific data, we made review of published materials of 58 issues to construct definition, history, etiology, pathogenesis (toxins and mechanisms of action, clinical symptoms, treatment and prevention of the Ciguatera or ichtyosarcotoxicosis, a wide spread food-born poisoning. Results: Ciguatera poisoning is ichtyosarcotoxicosis, a wide-spread foodborne poisoning in people after consumption of flesh of different kinds of fishes in which toxins produced by poisonous microorganisms (Dinoflagellates have accumulated. The poisoning develops by accumulating toxins higher up the food chain starting with toxin producing dinoflagellates (species: Gambierdiscus toxicus, Prorocentrum concavum, Pr. lima, Ostreoposis lenticularis, Ostr. Siamensis and others, continuing with the poisoned algae (species: Portieria, Halymenia, Turbinaria, Sargassum, and after that involving small crustacea and small fishes to greater fishes (vector fishes, genus Herbivores and Carnivores, in which the toxins have been stored in amount, great enough to cause foodborne poisoning in humans. This poisoning is widespread in tropical and subtropical regions, but because of its delayed toxic effects, lasting

  11. Keyword: Placement

    Science.gov (United States)

    Cassuto, Leonard

    2012-01-01

    The practical goal of graduate education is placement of graduates. But what does "placement" mean? Academics use the word without thinking much about it. "Placement" is a great keyword for the graduate-school enterprise. For one thing, its meaning certainly gives a purpose to graduate education. Furthermore, the word is a portal into the way of…

  12. [Suicidal poisoning with benzodiazepines].

    Science.gov (United States)

    Chodorowski, Z; Sein Anand, J

    1997-01-01

    In the period from 1987 to 1996, 103 patients with suicidal benzodiazepines poisoning were treated, including 62 women and 41 men from 16 to 79 (mean 34) years old. 23 persons were poisoned only by benzodiazepines, in 80 remaining cases intoxications were mixed eg. including benzodiazepines and alcohol, tricyclic antidepressants, barbiturates, opioids, phenothiazines. The main causes of suicides were mainly depression, drug addiction and alcoholism. Nobody died in the benzodiazepines group, while mortality rate in the group of mixed poisoning was 4%. Prescribing benzodiazepines by physicians was quite often not justified and facilitated, among others, accumulation of the dose sufficient for suicide attempt. Flumazenil was efficient for leading out from coma in 86% of cases with poisoning only by benzodiazepines and 13% of cases with mixed intoxications mainly containing benzodiazepines and alcohol or carbamazepine.

  13. Poison 1 - a programme for calculation of reactivity transients due to fission product poisoning and its application in continuous determination of xenon and samarium poisoning in reactor KS-150

    International Nuclear Information System (INIS)

    Rana, S.B.

    1973-12-01

    The report contains a user's description of the 3-dimensional programme POISON 1 for calculating reactivity transients due to fission-product poisoning during changes of reactor power. The chapter dealing with Xe poisoning contains a description of Xe tables, the method of operational determination of Xe poisoning, use of Xe transients for calibrating control rods and means of shutting down the reactor without being overriden by Xe poisoning. Sm poisoning is determined continuously on the basis of the power diagram of reactor operation. In conclusion a possibility of using the programme in a process computer in combination with self-powered detectors as local power sensors is indicated. (author)

  14. Oil-based paint poisoning

    Science.gov (United States)

    Paint - oil-based - poisoning ... Hydrocarbons are the primary poisonous ingredient in oil paints. Some oil paints have heavy metals such as lead, mercury, cobalt, and barium added as pigment. These heavy metals can cause additional ...

  15. Poison exposures in young Israeli military personnel: a National Poison Center Data analysis.

    Science.gov (United States)

    Lavon, Ophir; Bentur, Yedidia

    2017-06-01

    To characterize poison exposures in young Israeli military personnel as reported to the national poison center. Retrospective poison center chart review over a 14-year period. Cases included were Israeli soldiers aged 18-21 years, the compulsory military service age required by the Israeli law. 1770 records of poison exposures in young military personnel were identified. Most exposed individuals involved males (n = 1268, 71.6%). Main routes of exposure were ingestion (n = 854, 48.3%), inhalation (n = 328, 18.6%) and ocular (n = 211, 11.9%). Accidents or misuse (n = 712, 40.2%) were the most frequently reported circumstances, followed by suicide attempts (370, 20.9%), and bites and stings (161, 9.1%). More than half of the cases involved chemicals (n = 939, 53.1%); hydrocarbons, gases and corrosives were the main causative agents. Pharmaceuticals (mainly analgesics) were involved in 519 (29.3%) cases, venomous animals (mainly scorpions, centipedes, and snakes) in 79 (4.5%). Clinical manifestations were reported in 666 (37.6%) cases, mostly gastrointestinal, neurologic, and respiratory. The vast majority of cases (1634, 92.3%) were asymptomatic or mildly affected; no fatalities were recorded. In 831 (46.9%) cases the clinical toxicologist recommended referral to an emergency department; ambulatory observation was recommended in 563 (31.8%) cases, and hospitalization in 86 (4.9%). Our data show that poison exposures among young soldiers involve mainly males, accidents, misuse and suicides, oral route and chemicals; most exposures were asymptomatic or with mild severity. Repeated evaluations of poison center data pertaining to military personnel is advised for identifying trends in poison exposure and characteristics in this particular population.

  16. High Flux Materials Testing Reactor (HFR), Petten

    International Nuclear Information System (INIS)

    1975-09-01

    After conversion to burnable poison fuel elements, the High Flux Materials Testing Reactor (HFR) Petten (Netherlands), operated through 1974 for 280 days at 45 MW. Equipment for irradiation experiments has been replaced and extended. The average annual occupation by experiments was 55% as compared to 38% in 1973. Work continued on thirty irradiation projects and ten development activities

  17. Boron concentration evolution in the temporary curtains of a BWR reactor. Burcur code

    International Nuclear Information System (INIS)

    Cano Aguado, M.; Perlado Martin, J.M.; Minguez Torres, E.

    1977-01-01

    The theoretical model and the user's guide of the code Burcur is included. This code analyzes the burnable poison concentration of the temporary curtains as a function of time, for BWR reactors of the 7 x 7 design. The computing time being reasonably short, the number of burnup steps is as high as necessary.(author) [es

  18. Lead poisoning in dogs

    Energy Technology Data Exchange (ETDEWEB)

    Wilson, M R; Lewis, G

    1963-08-03

    Within a short period, 14 cases of lead poisoning in the dogs have been encountered. A detailed record appears justified as no published reference can be found to this condition occurring in Britain and because reports from other countries stress the similarity of the clinical manifestations of lead poisoning to those of the common infections of the dog. Five of the 14 clinical cases of lead poisoning are described. The available literature is reviewed and the diagnosis and significance of the condition discussed. 19 references, 2 tables.

  19. Diagnosis of acute poisoning

    African Journals Online (AJOL)

    Chantel

    functional tissue damage in ... cury or alcohol) .... †The degree of poisoning, together with drug or poison levels, usually determines the .... monoxide, caffeine and the sym- .... the brain. It usually occurs when two or more drugs, which increase.

  20. Cardiological aspects of carbon monoxide poisoning.

    Science.gov (United States)

    Marchewka, Jakub; Gawlik, Iwona; Dębski, Grzegorz; Popiołek, Lech; Marchewka, Wojciech; Hydzik, Piotr

    2017-01-01

    The aim of this study was to assess cardiological manifestations of carbon monoxide (CO) poisoning. Background/introduction: Carbon monoxide intoxication is one of the most important toxicological causes of morbidity and mortality worldwide. Early clinical manifestation of CO poisoning is cardiotoxicity. We enrolled 75 patients (34 males and 41 females, mean age 37.6 ± 17.7 y/o) hospitalized due to CO poisoning. Laboratory tests including troponin I, blood pressure measurements, HR and electrocardiograms (ECG) were collected. Pach's scale scoring and grading system was used to establish severity of poisoning. Grade of poisoning is positively correlated with troponin I levels and systolic blood pressure. Moreover, troponin levels are significantly correlated with exposition time, lactates and are higher in tachycardiac, hypertensive and positive ECG subpopulations. COHb levels are indicative of exposure but do not correlate with grade of poisoning. The main cause of CO poisoning were bathroom heaters - 83%, only 11% of examined intoxicated population were equipped with CO detectors. Complex cardiological screening covering troponin levels, ECG, blood pressure and heart rate measurements as well as complete blood count with particular attention to platelet parameters should be performed in each case where CO intoxication is suspected. More emphasis on education on CO poisoning is needed.

  1. Plant Poisoning among Children in Rural Sri Lanka

    Directory of Open Access Journals (Sweden)

    M. B. Kavinda Chandimal Dayasiri

    2017-01-01

    Full Text Available Plant poisoning is a common presentation in paediatric practice and an important cause of preventable mortality and morbidity in Sri Lanka. The burden of plant poisoning is largely underexplored. The current multicenter study based in rural Sri Lanka assessed clinical profiles, poison related factors, clinical management, complications, outcomes, and risk factors associated with plant poisoning in the paediatric age group. Among 325 children, 57% were male with 64% being below five years of age. 99.4% had ingested the poison. Transfer rate was 66.4%. Most had unintentional poisoning. Commonest poison plant was Jatropha circus and poisoning event happened mostly in home garden. 29% of parents practiced harmful first-aid practices. 32% of children had delayed presentations to which the commonest reason was lack of parental concern regarding urgency of seeking medical care. Presence of poisonous plants in home garden was the strongest risk factor for plant poisoning. Mortality rate was 1.2% and all cases had Oleander poisoning. The study revealed the value of community awareness regarding risk factors and awareness among healthcare workers regarding the mostly benign nature of plant poisoning in children in view of limiting incidence of plant poisoning and reducing expenditure on patient management.

  2. Carbon Monoxide Poisoning

    Directory of Open Access Journals (Sweden)

    Alisa Wray

    2016-07-01

    Full Text Available Audience: This oral boards case is appropriate for all emergency medicine learners (residents, interns, and medical students. Introduction: Carbon monoxide (CO is a colorless and odorless gas that typically results from combustion. It binds hemoglobin, dissociating oxygen, causing headache, weakness, confusion and possible seizure or coma. Pulse oxygen levels may be falsely elevated. Practitioners should maintain a high index of suspicion for carbon monoxide poisoning. If caught early CO poisoning is reversible with oxygen or hyperbaric oxygen therapy. Objectives: The learner will assess a patient with altered mental status and weakness, ultimately identifying that the patient has carbon monoxide poisoning. The learner will treat the patient with oxygen and admit/transfer the patient for hyperbaric oxygenation. Method: Oral boards case

  3. Fission product poisoning in KS-150 reactor operation

    International Nuclear Information System (INIS)

    Rana, S.B.

    1978-01-01

    A three-dimensional model of the KS-150 reactor was used to study reactivity changes induced by reactor poisoning with fission products Xe 135 and Sm 149 . A comparison of transients caused by the poisoning showed the following differences: (1) the duration of the transient Xe poisoning (2 days) is shorter by one order of magnitude than the duration of Sm poisoning (20 days); however, the level of Xe poisoning is greater approximately by one order than the level of the Sm poisoning; (2) the level of steady-state Xe poisoning depends on the output level of the reactor; steady-state Sm poisoning does not depend on this level; (3) following reactor shutdown Xe poisoning may increase to the maximum value of up to Δrhosub(Xe)=20% and will then gradually decrease; Sm poisoning may reach maximum values of up to Δrhosub(Sm)=2% and does not decrease. (J.B.)

  4. Arsenical poisoning of racehorses

    Energy Technology Data Exchange (ETDEWEB)

    Sutherland, G.N.; Fawell, E.V.; Brown, J.K.

    1964-03-07

    A case of arsenic poisoning in a training stable of Thoroughbred racehorses is described. This was due to the accidental spilling of an arsenical rat poison into the corn bin. Nine horses were affected. The mortality rate was 100 per cent. 1 table.

  5. Potassium permanganate poisoning--a rare cause of fatal self poisoning.

    OpenAIRE

    Ong, K L; Tan, T H; Cheung, W L

    1997-01-01

    Attempted suicide by self poisoning is common because of the ready availability of drugs, whether prescribed or bought over the counter. In some cases, the ingestion of seemingly innocuous household products or chemicals can result in death. Potassium permanganate is an example. Poisoning with potassium permanganate can be fatal when a significant amount is ingested, as shown by a patient who suffered both the corrosive and systemic toxic effects of this chemical.

  6. Reverse depletion method for PWR core reload design

    International Nuclear Information System (INIS)

    Downar, T.J.; Kim, Y.J.

    1985-01-01

    Low-leakage fuel management is currently practiced in over half of all pressurized water reactor (PWR) cores. Prospects for even greater use of in-board fresh fuel loading are good as utilities seek to reduce core vessel fluence, mitigate pressurized thermal shock concerns, and extend vessel lifetime. Consequently, large numbers of burnable poison (BP) pins are being used to control the power peaking at the in-board fresh fuel positions. This has presented an additional complexity to the core reload design problem. In addition to determining the best location of each assembly in the core, the designer must concurrently determine the distribution of BP pins in the fresh fuel. A procedure was developed that utilizes the well-known Haling depletion to achieve an end-of-cycle (EOC) core state where the assembly pattern is configured in the absence of all control poison. This effectively separates the assembly assignment and BP distribution problems. Once an acceptable pattern at EOC is configured, the burnable and soluble poison required to control the power and core excess reactivity are solved for as unknown variables while depleting the cycle in reverse from the EOC exposure distribution to the beginning of cycle. The methods developed were implemented in an approved light water reactor licensing code to ensure the validity of the results obtained and provide for the maximum utility to PWR core reload design

  7. Cartap Hydrochloride Poisoning.

    Science.gov (United States)

    Kalyaniwala, Kimmin; Abhilash, Kpp; Victor, Peter John

    2016-08-01

    Cartap hydrochloride is a moderately hazardous nereistoxin insecticide that is increasingly used for deliberate self-harm in India. It can cause neuromuscular weakness resulting in respiratory failure. We report a patient with 4% Cartap hydrochloride poisoning who required mechanical ventilation for 36-hours. He recovered without any neurological deficits. We also review literature on Cartap hydrochloride poisoning. © Journal of the Association of Physicians of India 2011.

  8. American Association of Poison Control Centers

    Science.gov (United States)

    ... add poison control as a contact in your smartphone. Take the pledge! National Poison Prevention Week is March 19-25! Be a part of the conversation by following #PreventPoison and #NPPW2017 on social media, and check out AAPCC's NPPW webpage and press ...

  9. RPV housed ATWS poison tank

    International Nuclear Information System (INIS)

    Oosterkamp, W.J.

    1992-01-01

    This patent describes a boiling water reactor (BWR) wherein housed within a reactor pressure vessel (RPV) is a nuclear core and an upper steam dome connected to a steam outlet in the RPV. The improvement comprises: a pressurized vessel disposed in the steam dome containing a neutron poison effective for inactivating the core and a first line for assaying the poison which first line runs to the outside of the RPV, the vessel being vented to the steam dome to pressurize the poison contained therein, the vessel being connected by a second line terminating beneath the core, the second line containing a valve which is actuable to release the poison through the line upon its actuation

  10. The influence of petrography, mineralogy and chemistry on burnability and reactivity of quicklime produced in Twin Shaft Regenerative (TSR) kilns from Neoarchean limestone (Transvaal Supergroup, South Africa)

    Science.gov (United States)

    Vola, Gabriele; Sarandrea, Luca; Della Porta, Giovanna; Cavallo, Alessandro; Jadoul, Flavio; Cruciani, Giuseppe

    2017-12-01

    This study evaluates the influence of chemical, mineralogical and petrographic features of the Neoarchean limestone from the Ouplaas Mine (Griqualand West, South Africa) on its burnability and quicklime reactivity, considering the main use as raw material for high-grade lime production in twin shaft regenerative (TSR) kilns. This limestone consists of laminated clotted peloidal micrite and fenestrate microbial boundstone with herringbone calcite and organic carbon (kerogen) within stylolites. Diagenetic modifications include hypidiotopic dolomite, micrite to microsparite recrystallization, stylolites, poikilotopic calcite, chert and saddle dolomite replacements. Burning and technical tests widely attest that the Neoarchean limestone is sensitive to high temperature, showing an unusual and drastically pronounced sintering or overburning tendency. The slaking reactivity, according to EN 459-2 is high for lime burnt at 1050 °C, but rapidly decreases for lime burnt at 1150 °C. The predominant micritic microbial textures, coupled with the organic carbon, are key-factors influencing the low burnability and the high sintering tendency. The presence of burial cementation, especially poikilotopic calcite, seems to promote higher burnability, either in terms of starting calcination temperature, or in terms of higher carbonate dissociation rate. In fact, the highest calcination velocity determined by thermal analysis is consistent with the highest slaking reactivity of the lower stratum of the quarry, enriched in poikilotopic calcite. Secondly, locally concentered dolomitic marly limestones, and sporadic back shales negatively affects the quicklime reactivity, as well. This study confirms that a multidisciplinary analytical approach is essential for selecting the best raw mix for achieving the highest lime reactivity in TSR kilns.

  11. 49 CFR 172.540 - POISON GAS placard.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false POISON GAS placard. 172.540 Section 172.540... SECURITY PLANS Placarding § 172.540 POISON GAS placard. (a) Except for size and color, the POISON GAS... the POISON GAS placard and the symbol must be white. The background of the upper diamond must be black...

  12. Common causes of poisoning: etiology, diagnosis and treatment.

    Science.gov (United States)

    Müller, Dieter; Desel, Herbert

    2013-10-01

    In 2011, German hospitals treated approximately 205 000 patients suffering from acute poisoning. Change is seen over time both in the types of poisoning that occur and in the indications for specific treatment. This article is based on a selective review of the literature, with special attention to the health reports of the German federal government, the annual reports of the GIZ-Nord Poisons Center (the poison information center for the four northwestern states of Germany, i.e. Bremen, Hamburg, Lower Saxony and Schleswig-Holstein), and the recommendations of international medical associations. From 1996 to 2011, the GIZ-Nord Poisons Center answered more than 450 000 inquiries, most of which involved exposures to medical drugs, chemicals, plants, foods, or cosmetics. Poisoning was clinically manifest in only a fraction of these cases. Ethanol intoxication is the commonest type of acute poisoning and suicide by medical drug overdose is the commonest type of suicide by poisoning. Death from acute poisoning is most commonly the result of either smoke inhalation or illegal drug use. Severe poisoning is only rarely due to the ingestion of chemicals (particularly detergents and cleaning products), cosmetics, or plant matter. Medical procedures that are intended to reduce the absorption of a poison or enhance its elimination are now only rarely indicated. Antidotes (e.g., atropine, 4-dimethylaminophenol, naloxone, toluidine blue) are available for only a few kinds of poisoning. Randomized clinical trials of treatment have been carried out for only a few substances. Most exposures to poisons can be treated with general emergency care and, if necessary, with symptomatic intensive-care measures. Poison information centers help ensure that cases of poisoning are dealt with efficiently. The data they collect are a useful aid to toxicological assessment and can serve as a point of departure for research projects.

  13. 49 CFR 172.416 - POISON GAS label.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false POISON GAS label. 172.416 Section 172.416... SECURITY PLANS Labeling § 172.416 POISON GAS label. (a) Except for size and color, the POISON GAS label... POISON GAS label and the symbol must be white. The background of the upper diamond must be black and the...

  14. Modified poisoning severity score for early prognostic evaluation in acute paraquat poisoning

    Directory of Open Access Journals (Sweden)

    Feng-lin SONG

    2018-04-01

    Full Text Available Objective To study the applied value of modified poisoning severity score (PSS for early prognostic evaluation in acute paraquat poisoning. Methods Thirty-seven patients with acute paraquat poisoning from June 2013 to June 2016 were enrolled. The PSS score, the modified PSS score, the acute physiology and the chronic health status Ⅱ score (APACHE Ⅱ of the patients were calculated. The relationship between modified PSS and APACHE Ⅱ was analyzed. Also the factors that affect outcome were analyzed by logistic regression analysis. The work characteristic curve (ROC curve of the PSS, the modified PSS and the APECH Ⅱ were drawn and compared. Results There was a positive correlation between the risk of death and admission time, poisonous dose, the concentration of urine paraquat, and white blood cell count (P<0.05. There was a significant correlation between the modified PSS and the APACHE Ⅱ(P<0.0001. The immediate PSS score, the modified PSS score, and the APACHE Ⅱ score were significant for the prognosis of patients with acute paraquat poisoning. The area under the curve (AUC was in turn 0.774, 0.788, 0.799. Among them, the best bound of the modified PSS score was 6.5 (when the score is greater than 6.5, the risk of death is higher. Further comparison of the area under the three curves showed that there was no significant difference in the area under the ROC curve between the three scores in predicting the prognosis of death [P=0.7633(PSS-DPSS, P=0.7791(PSS-APACHE Ⅱ, P=0.8918(DPSS-APACHE Ⅱ]. Conclusion Modified PSS is helpful in early predicting the prognosis of acute paraquat poisoning. DOI: 10.11855/j.issn.0577-7402.2018.04.13

  15. Chelation Therapy for Mercury Poisoning

    OpenAIRE

    Rong Guan; Han Dai

    2009-01-01

    Chelation therapy has been the major treatment for heavy metal poisoning. Various chelating agents have been developed and tested for treatment of heavy metal intoxications, including mercury poisoning. It has been clearly shown that chelating agents could rescue the toxicity caused by heavy metal intoxication, but the potential preventive role of chelating agents against heavy metal poisoning has not been explored much. Recent paper by Siddiqi and colleagues has suggested a protective role o...

  16. Determining fissile content of nuclear fuel elements

    International Nuclear Information System (INIS)

    Arya, S.P.; Grossman, L.N.; Schoenig, F.C.

    1980-01-01

    This invention relates to the determination of the fissile fuel content of fuel for nuclear reactors. A nondestructive method is described for determining rapidly, accurately and simultaneously the fissile content, enrichment and location of fuel material which may also contain amounts of burnable poison, by detecting the γ-rays emitted from the fuel material due to natural radioactive decay. (U.K.)

  17. Shaping of the axial power density distribution in the core to minimize the vapor volume fraction at the outlet of the VVER-1200 fuel assemblies

    Energy Technology Data Exchange (ETDEWEB)

    Savander, V. I.; Shumskiy, B. E., E-mail: borisshumskij@yandex.ru [National Research Nuclear University MEPhI (Russian Federation); Pinegin, A. A. [National Research Center Kurchatov Institute (Russian Federation)

    2016-12-15

    The possibility of decreasing the vapor fraction at the VVER-1200 fuel assembly outlet by shaping the axial power density field is considered. The power density field was shaped by axial redistribution of the concentration of the burnable gadolinium poison in the Gd-containing fuel rods. The mathematical modeling of the VVER-1200 core was performed using the NOSTRA computer code.

  18. National Poison Prevention Week Promotional Materials.

    Science.gov (United States)

    Poison Prevention Week Council, Washington, DC.

    This collection of materials for parents, early childhood workers, the elderly, and anyone in situations requiring safeguards against poisoning, spans the years 1993 and 1994 and is intended to promote National Poison Prevention Week. The materials included are: (1) the 31-page, illustrated report on National Poison Prevention Week for 1993,…

  19. Paraquat poisoning in the dog

    International Nuclear Information System (INIS)

    O'Sullivan, S.P.

    1989-01-01

    Recovery from paraquat poisoning in the dog is rare. This is a report of a case of recovery from confirmed paraquat poisoning in a clinical setting. The dog exhibited the usual signs of paraquat poisoning. The diagnosis was confirmed on toxicological analysis of urine using an ion exchange technique. The dog was treated with frusemide, nicotinamide, corticosteroids, α-tocopherol, vitamin A, etamiphylline camsylate and ampicillin. He recovered after seven weeks of intensive therapy. Alternative treatments are discussed

  20. Burnable absorber-integrated Guide Thimble (BigT) - 1. Design concepts and neutronic characterization on the fuel assembly benchmarks

    International Nuclear Information System (INIS)

    Yahya, Mohd-Syukri; Yu, Hwanyeal; Kim, Yonghee

    2016-01-01

    This paper presents the conceptual designs of a new burnable absorber (BA) for the pressurized water reactor (PWR), which is named 'Burnable absorber-integrated Guide Thimble' (BigT). The BigT integrates BA materials into standard guide thimble in a PWR fuel assembly. Neutronic sensitivities and practical design considerations of the BigT concept are points of highlight in the first half of the paper. Specifically, the BigT concepts are characterized in view of its BA material and spatial self-shielding variations. In addition, the BigT replaceability requirement, bottom-end design specifications and thermal-hydraulic considerations are also deliberated. Meanwhile, much of the second half of the paper is devoted to demonstrate practical viability of the BigT absorbers via comparative evaluations against the conventional BA technologies in representative 17x17 and 16x16 fuel assembly lattices. For the 17x17 lattice evaluations, all three BigT variants are benchmarked against Westinghouse's existing BA technologies, while in the 16x16 assembly analyses, the BigT designs are compared against traditional integral gadolinia-urania rod design. All analyses clearly show that the BigT absorbers perform as well as the commercial BA technologies in terms of reactivity and power peaking management. In addition, it has been shown that sufficiently high control rod worth can be obtained with the BigT absorbers in place. All neutronic simulations were completed using the Monte Carlo Serpent code with ENDF/B-VII.0 library. (author)

  1. Levothyroxine Poisoning - Symptoms and Clinical Outcome

    DEFF Research Database (Denmark)

    Nygaard, Birgitte; Saedder, Eva A; Dalhoff, Kim

    2015-01-01

    Levothyroxine (LT), T4, poisoning is rarely associated with a severe outcome. However, cases with significant complications have been reported. The aim of this study was to identify factors associated with symptoms of poisoning including late-onset symptoms. All enquiries to the Danish Poison...... Information Centre (DPIC) concerning LT poisoning between March 2007 and September 2012 were reviewed and the following parameters were recorded: age, dose, time from ingestion, multiple drug intake and symptoms. To evaluate the frequency of late-onset symptoms, a subgroup of patients without initial symptoms...... patients, neither in children nor in adults (age 16-92 years) (p poisoning at the time of enquiry; however, in 9 of 21 (43%) patients, we were able to contact, late-onset symptoms existed. In none of the cases...

  2. Characteristics of poisoning cases in Adiyaman city

    Directory of Open Access Journals (Sweden)

    Öznur Uludağ

    2015-09-01

    Full Text Available Objective: Aim of this study was to retrospectively evaluate poisoning cases in an intensive care unit (ICU in order to determine the profile of poisoning cases, update epidemiological data in Adiyaman, and contribute to data about poisoning in our country. Methods: Between 01-01-2012 and 31-12-2013 174 patients (116 males, 58 females with a mean age of 23.7 years were treated. Demographic characteristics, reasons and ways of poisoning, types of toxic substances, length of their ICU stay and prognosis were evaluated. Results: 2733 patients admitted to the intensive care unit were 174 poisoning cases. Poisoning ways were suicide by drug overdose (n=162, 93.1%, and accidental poisoning (n=12,6.9%.119 patients (66.5% had single drug intake, thirty-three patients (18.4% with multiple drug intake, and 16 (8.9% were poisoned by organic phosphates. The most common drug used for suicide was antidepressants (n=87.5%. 32 patients (18.4% took analgesics and anti-inflammatory drugs. A total of 152 patients taking the drug, 22 patients were poisoned by other means. The median length of patient stay was 2 days (range 1-20 days. Ninety-nine patients (56.9% recovered and were discharged.72 patients (41.4% were admitted to inpatient after intensive care unit. Patients were followed up by asking poisoning suicidal psychiatric consultation.1 patient was followed up for 20 days in intensive care due to alcohol poisoning but was died.2 patients (1.1% were referred to a center forward. Conclusion: Majority of the patients were females, who took drugs with suicidal intention. Frequent use of antidepressants, which are not subject to control by authorities, to commit suicide was remarkable.

  3. Chronic arsenic poisoning following ayurvedic medication.

    Science.gov (United States)

    Pinto, Benzeeta; Goyal, Palvi; Flora, S J S; Gill, K D; Singh, Surjit

    2014-12-01

    Ayurveda, Indian traditional system of medicine, is practiced commonly in South East Asia and in many parts of the world. Many ayurvedic drugs contain heavy metals and may lead to metal toxicity. Of these, chronic lead poisoning is the most common. Chronic arsenic poisoning following the use of ayurvedic medication, though reported, is rare. We describe three patients who presented with features of chronic arsenic poisoning following prolonged ayurvedic medication use. The diagnosis of chronic arsenic poisoning was confirmed by high arsenic levels in the blood, urine, hair, and nails in all the three patients and in ayurvedic drug in two patients. The ayurvedic medication was discontinued and treatment with D-penicillamine started. At 6 months after treatment, blood arsenic levels returned to normal with clinical recovery in all of them. Arsenic poisoning following ayurvedic medication is much less common than lead poisoning, though mineral ayurvedic medicines may lead to it. We used D-penicillamine as chelator and all of them recovered. Whether withdrawal of medication alone or D-penicillamine also played a role in recovery is unclear and needs to be assessed.

  4. Pulmonary edema in acute carbon monoxide poisoning

    International Nuclear Information System (INIS)

    Kim, Kun Sang; Chang, Kee Hyun; Lee, Myung Uk

    1974-01-01

    Acute carbon monoxide poisoning has frequently occurred in Korean, because of the coal briquette being widely used as fuel in Korean residences. Carbon monoxide poisoning has been extensively studied, but it has been sparsely reported that pulmonary edema may develop in acute CO poisoning. We have noticed nine cases of pulmonary edema in acute CO poisoning last year. Other possible causes of pulmonary edema could be exclude in all cases but one. The purpose of this paper is to describe nine cases of pulmonary edema complicated in acute CO poisoning and discuss the pathogenesis and the prognosis

  5. Article Commentary: Chelation Therapy for Mercury Poisoning

    Directory of Open Access Journals (Sweden)

    Rong Guan

    2009-01-01

    Full Text Available Chelation therapy has been the major treatment for heavy metal poisoning. Various chelating agents have been developed and tested for treatment of heavy metal intoxications, including mercury poisoning. It has been clearly shown that chelating agents could rescue the toxicity caused by heavy metal intoxication, but the potential preventive role of chelating agents against heavy metal poisoning has not been explored much. Recent paper by Siddiqi and colleagues has suggested a protective role of chelating agents against mercury poisoning, which provides a promising research direction for broader application of chelation therapy in prevention and treatment of mercury poisoning.

  6. Pulmonary edema in acute carbon monoxide poisoning

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Kun Sang; Chang, Kee Hyun; Lee, Myung Uk [Seoul National University College of Medicine, Seoul (Korea, Republic of)

    1974-10-15

    Acute carbon monoxide poisoning has frequently occurred in Korean, because of the coal briquette being widely used as fuel in Korean residences. Carbon monoxide poisoning has been extensively studied, but it has been sparsely reported that pulmonary edema may develop in acute CO poisoning. We have noticed nine cases of pulmonary edema in acute CO poisoning last year. Other possible causes of pulmonary edema could be exclude in all cases but one. The purpose of this paper is to describe nine cases of pulmonary edema complicated in acute CO poisoning and discuss the pathogenesis and the prognosis.

  7. [A relational database to store Poison Centers calls].

    Science.gov (United States)

    Barelli, Alessandro; Biondi, Immacolata; Tafani, Chiara; Pellegrini, Aristide; Soave, Maurizio; Gaspari, Rita; Annetta, Maria Giuseppina

    2006-01-01

    Italian Poison Centers answer to approximately 100,000 calls per year. Potentially, this activity is a huge source of data for toxicovigilance and for syndromic surveillance. During the last decade, surveillance systems for early detection of outbreaks have drawn the attention of public health institutions due to the threat of terrorism and high-profile disease outbreaks. Poisoning surveillance needs the ongoing, systematic collection, analysis, interpretation, and dissemination of harmonised data about poisonings from all Poison Centers for use in public health action to reduce morbidity and mortality and to improve health. The entity-relationship model for a Poison Center relational database is extremely complex and not studied in detail. For this reason, not harmonised data collection happens among Italian Poison Centers. Entities are recognizable concepts, either concrete or abstract, such as patients and poisons, or events which have relevance to the database, such as calls. Connectivity and cardinality of relationships are complex as well. A one-to-many relationship exist between calls and patients: for one instance of entity calls, there are zero, one, or many instances of entity patients. At the same time, a one-to-many relationship exist between patients and poisons: for one instance of entity patients, there are zero, one, or many instances of entity poisons. This paper shows a relational model for a poison center database which allows the harmonised data collection of poison centers calls.

  8. Calculational modeling of fuel assemblies of WWER-1000 type with the use of burnable absorber Gadolinum; comparative analysis

    International Nuclear Information System (INIS)

    Yeremenko, M.L.; Kovbasenko, Yu.P.; Loetsch, T.

    2001-01-01

    In connection with the beginning of the use of fuel assemblies with burnable absorbers by integration of Gadolinum into the nuclear fuel at Ukrainian NPP the task of testing the code systems and the pertinent neutron cross section libraries for the new fuel arose. Taking into account the long term experience of German experts with calculations and evaluation of nuclear fuel containing Gadolinum it was decided to carry out a series of test calculations for fuel assembly lattices of PWR, WWER-440 and WWER-1000 types using the NESSEL/PYTHIA and CASMO/SIMULATE code systems (Authors)

  9. Outsmarting Poison Ivy and Other Poisonous Plants

    Science.gov (United States)

    ... poison sumac. Protectants such as baking soda or colloidal oatmeal relieve minor irritation and itching. Aluminum acetate ... Food and Drug Administration 10903 New Hampshire Avenue Silver Spring, MD 20993 1-888-INFO-FDA (1- ...

  10. 16 CFR 1700.15 - Poison prevention packaging standards.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Poison prevention packaging standards. 1700.15 Section 1700.15 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS POISON PREVENTION PACKAGING § 1700.15 Poison prevention packaging...

  11. Poison ivy - oak - sumac rash

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/000027.htm Poison ivy - oak - sumac rash To use the sharing features on this page, please enable JavaScript. Poison ivy, oak, and sumac are plants that commonly ...

  12. Extracorporeal Treatment in Phenytoin Poisoning

    DEFF Research Database (Denmark)

    Anseeuw, Kurt; Mowry, James B; Burdmann, Emmanuel A

    2016-01-01

    The Extracorporeal Treatments in Poisoning (EXTRIP) Workgroup conducted a systematic literature review using a standardized process to develop evidence-based recommendations on the use of extracorporeal treatment (ECTR) in patients with phenytoin poisoning. The authors reviewed all articles......) despite its high protein binding and made the following recommendations. ECTR would be reasonable in select cases of severe phenytoin poisoning (neutral recommendation, 3D). ECTR is suggested if prolonged coma is present or expected (graded 2D) and it would be reasonable if prolonged incapacitating ataxia...... is present or expected (graded 3D). If ECTR is used, it should be discontinued when clinical improvement is apparent (graded 1D). The preferred ECTR modality in phenytoin poisoning is intermittent hemodialysis (graded 1D), but hemoperfusion is an acceptable alternative if hemodialysis is not available...

  13. Is Your Child Safe from Lead Poisoning?

    Centers for Disease Control (CDC) Podcasts

    In this podcast, Dr. Mary Jean Brown, chief of CDC's Lead Poisoning and Prevention Program, discusses the importance of testing children for lead poisoning, who should be tested, and what parents can do to prevent lead poisoning.

  14. PWR fuel of high enrichment with erbia and enriched gadolinia

    International Nuclear Information System (INIS)

    Bejmer, Klaes-Håkan; Malm, Christian

    2011-01-01

    Today standard PWR fuel is licensed for operation up to 65-70 MWd/kgU, which in most cases corresponds to an enrichment of more than 5 w/o "2"3"5U. Due to criticality safety reason of storage and transportation, only fuel up to 5 w/o "2"3"5U enrichment is so far used. New fuel storage installations and transportation casks are necessary investments before the reactivity level of the fresh fuel can be significantly increased. These investments and corresponding licensing work takes time, and in the meantime a solution that requires burnable poisons in all pellets of the fresh high-enriched fuel might be used. By using very small amounts of burnable absorber in every pellet the initial reactivity can be reduced to today's levels. This study presents core calculations with fuel assemblies enriched to almost 6 w/o "2"3"5U mixed with a small amount of erbia. Some of the assemblies also contain gadolinia. The results are compared to a reference case containing assemblies with 4.95 w/o "2"3"5U without erbia, utilizing only gadolinia as burnable poison. The comparison shows that the number of fresh fuel assemblies can be reduced by 21% (which increases the batch burnup by 24%) by utilizing the erbia fuel concept. However, increased cost of uranium due to higher enrichment is not fully compensated for by the cost gain due to the reduction of the number assemblies. Hence, the fuel cycle cost becomes slightly higher for the high enrichment erbia case than for the reference case. (author)

  15. Amnesic Shellfish Poisoning (ASP)

    DEFF Research Database (Denmark)

    Ravn, H.

    HAB Publ. Ser. vol 1 is a supplement to Chapter 7 Mehtods for Domoic Acid, the Amnesic Shellfish Poisons in the IOC Manual of Harmful Marine Microalgae......HAB Publ. Ser. vol 1 is a supplement to Chapter 7 Mehtods for Domoic Acid, the Amnesic Shellfish Poisons in the IOC Manual of Harmful Marine Microalgae...

  16. Reactor scram device using fluid poison tubes

    International Nuclear Information System (INIS)

    Iwasaki, Toshio; Hasegawa, Koji.

    1979-01-01

    Purpose: To improve the response function in the reactor scram with no wide space by injecting poisons in soluble poison guide tubes to such a liquid level as giving no effect on usual reactor operation. Constitution: Soluble poison guide tubes in a reactor are connected at their upper ends to a buffer tank and at their lower ends to a pressurizer by way of a header and an injection valve. The header is connected by way of a valve with a level meter, one end of which is connected to the buffer tank. During reactor operation, the injection valve is closed and the soluble poisons in the pressurizer vessel is maintained at a pressurized state and, while on the other hand, soluble poisons are injected by way of the header to the lower end of the soluble poison guide tubes by the opening of a valve, which is thereafter closed. Upon scram, a valve is closed to protect the level meter and pressurized poisons are rapidly filled in the guide tubes by the release of the injection valve. (Kawakami, Y.)

  17. Carbon monoxide poisoning at motels, hotels, and resorts.

    Science.gov (United States)

    Weaver, Lindell K; Deru, Kayla

    2007-07-01

    Each year, more than 200 people in the United States die from carbon monoxide (CO) poisoning. Poisoning has occurred at motels, hotels, and resorts. Congressional mandate requires smoke alarms in all guest rooms; however, smoke alarms do not detect CO. Data on patients poisoned at hotels, motels, and resorts were evaluated at a hyperbaric medicine service. In 2005, legal databases and online news databanks were searched to discover additional incidents. Only victims evaluated in hospitals or declared dead at the scene were included. Cases of intentional poisoning and poisoning from fires were excluded. Between 1989 and 2004, 68 incidents of CO poisoning occurring at hotels, motels, and resorts were identified, resulting in 772 accidentally poisoned: 711 guests, 41 employees or owners, and 20 rescue personnel. Of those poisoned, 27 died, 66 had confirmed sequelae, and 6 had sequelae resulting in a jury verdict. Lodging-operated, faulty room heating caused 45 incidents, pool/spa boilers 16, CO entrained from outdoors 5, and unreported sources caused 2 incidents. Public verdicts have averaged $4.8 million per incident (range, $1 million to $17.5 million). Poisoning occurred at hotels of all classes. Despite these incidents, most properties did not install CO alarms, and requirements for CO alarms at hotels, motels, and resorts are rare. Guests of motels, hotels, and resorts remain at risk for injury or death from CO poisoning. Measures to prevent CO poisoning of guests and employees of the lodging industry should be evaluated.

  18. Evaluation of the need for stochastic optimization of out-of-core nuclear fuel management decisions

    International Nuclear Information System (INIS)

    Thomas, R.L. Jr.

    1989-01-01

    Work has been completed on utilizing mathematical optimization techniques to optimize out-of-core nuclear fuel management decisions. The objective of such optimization is to minimize the levelized fuel cycle cost over some planning horizon. Typical decision variables include feed enrichments and number of assemblies, burnable poison requirements, and burned fuel to reinsert for every cycle in the planning horizon. Engineering constraints imposed consist of such items as discharge burnup limits, maximum enrichment limit, and target cycle energy productions. Earlier the authors reported on the development of the OCEON code, which employs the integer Monte Carlo Programming method as the mathematical optimization method. The discharge burnpups, and feed enrichment and burnable poison requirements are evaluated, initially employing a linear reactivity core physics model and refined using a coarse mesh nodal model. The economic evaluation is completed using a modification of the CINCAS methodology. Interest now is to assess the need for stochastic optimization, which will account for cost components and cycle energy production uncertainties. The implication of the present studies is that stochastic optimization in regard to cost component uncertainties need not be completed since deterministic optimization will identify nearly the same family of near-optimum cycling schemes

  19. Plutonium fuel lattice neutron behavior in inert matrix

    International Nuclear Information System (INIS)

    Hernandez L, H.; Lucatero, M. A.

    2010-10-01

    In several countries is had been researching the possibility of using plutonium, as weapon degree as reactor degree, as fuel material in commercial reactors to generate electricity. In special a great development has been in Pressure Water Reactors. However, in Mexico the reactors are Boiling Water Reactors type, reason for which the necessity to considers feasibility to use this fuel type in the reactors of nuclear power plant of Laguna Verde. For this propose a comparison of fuel lattice that compose a fuel assembly is made. The fuel assembly will propose to be used whit in the reactor present different inert matrix, as well as burnable poison. The material that compose the inert matrices used are cerium and zirconia (CeO 2 and ZrO 2 ) and as burnable poisons have gadolinium and erbium (Gd 2 O 4 and ErO 2 ). As far as the hydraulic design used is a cell 10 X 10 with two water channels. The lattice calculations are made with the Helios code a library with 35 energy groups, having determined the pin power factors, the infinite multiplication factor and the neutron flux profiles. (Author)

  20. A proposed heuristic methodology for searching reloading pattern

    International Nuclear Information System (INIS)

    Choi, K. Y.; Yoon, Y. K.

    1993-01-01

    A new heuristic method for loading pattern search has been developed to overcome shortcomings of the algorithmic approach. To reduce the size of vast solution space, general shuffling rules, a regionwise shuffling method, and a pattern grouping method were introduced. The entropy theory was applied to classify possible loading patterns into groups with similarity between them. The pattern search program was implemented with use of the PROLOG language. A two-group nodal code MEDIUM-2D was used for analysis of power distribution in the core. The above mentioned methodology has been tested to show effectiveness in reducing of solution space down to a few hundred pattern groups. Burnable poison rods were then arranged in each pattern group in accordance with burnable poison distribution rules, which led to further reduction of the solution space to several scores of acceptable pattern groups. The method of maximizing cycle length (MCL) and minimizing power-peaking factor (MPF) were applied to search for specific useful loading patterns from the acceptable pattern groups. Thus, several specific loading patterns that have low power-peaking factor and large cycle length were successfully searched from the selected pattern groups. (Author)

  1. Poison control center - emergency number

    Science.gov (United States)

    For a POISON EMERGENCY call: 1-800-222-1222 ANYWHERE IN THE UNITED STATES This national hotline number will let you ... is a free and confidential service. All local poison control centers in the United States use this ...

  2. Benzodiazepine poisoning in elderly.

    Science.gov (United States)

    Vukcević, Natasa Perković; Ercegović, Gordana Vuković; Segrt, Zoran; Djordjević, Snezana; Stosić, Jasmina Jović

    2016-03-01

    Benzodiazepines are among the most frequently ingested drugs in self-poisonings. Elderly may be at greater risk compared with younger individuals due to impaired metabolism and increased sensitivity to benzodiazepines. The aim of this study was to assess toxicity of benzodiazepines in elderly attempted suicide. A retrospective study of consecutive presentations to hospital after self-poisoning with benzodiazepines was done. Collected data consisted of patient's characteristics (age, gender), benzodiazepine ingested with its blood concentrations at admission, clinical findings including vital signs and Glasgow coma score, routine blood chemistry, complications of poisoning, details of management, length of hospital stay and outcome. According the age, patients are classified as young (15-40-year old), middle aged (41-65-year old) and elderly (older than 65). During a 2-year observational period 387 patients were admitted because of pure benzodiazepine poisoning. The most frequently ingested drug was bromazepam, the second was diazepam. The incidence of coma was significantly higher, and the length of hospital stay significantly longer in elderly. Respiratory failure and aspiration pneumonia occurred more frequently in old age. Also, flumazenil was more frequently required in the group of elderly patients. Massive benzodiazepines overdose in elderly may be associated with a significant morbidity, including deep coma with aspiration pneumonia, respiratory failure, and even death. Flumazenil is indicated more often to reduce CNS depression and prevent complications of prolonged unconsciousness, but supportive treatment and proper airway management of comatose patients is the mainstay of the treatment of acute benzodiazepine poisoning.

  3. Poisoning of animals by industrial fumes

    Energy Technology Data Exchange (ETDEWEB)

    Hofmann, P

    1937-01-01

    Autopsy findings of game that died presumably due to poisoning by arsenic are presented. Corrosive gastroenteritis with edema and ecchymosis of the mucosa, and partly ulceration of the stomach, and fatty degeneration of the kidneys and liver were found in hares and stags. Arsenic was detected in the gastric content, liver, and other organs. These cases were diagnosed as acute to subacute poisoning by arsenic. Catarrhal gastrointestinal mucosa, pseudomembranes, in the esophagus, inflammatory edema of the nasal septum and laryngeai mucosa, and sometimes liver cirrhosis and edema of the spleen were found in red deer, roes, and hares. In these cases, poisoning by arsenic could not be identified as the primary cause of death. The symptoms of the poisoning were similar to cause of death. The symptoms of the poisoning were similar to those observed in game around a smelter prior to the installation of an efficient arsenic trap.

  4. Experimental lead poisoning in chickens

    Energy Technology Data Exchange (ETDEWEB)

    Silven, L.

    1967-01-01

    Poisoning of water fowl due to the intake of lead shot is not rare in the USA. In order to study this kind of poisoning more closely domestic fowl were given varying amounts of lead shot and lead powder. This treatment did not provoke any symptoms of poisoning. Chemical analyses of different organs, muscles, skeleton and eggs yielded low lead values. It is concluded that the low toxicity of lead administered as lead shot to the domestic fowl is due to a low absorption rate from the gastro-intestinal tract.

  5. Vital Signs-Alcohol Poisoning Deaths

    Centers for Disease Control (CDC) Podcasts

    This podcast is based on the January 2015 CDC Vital Signs report. In the United States, an average of six people die every day from alcohol poisoning. Learn what you can do to prevent binge drinking and alcohol poisoning.

  6. Unearthing poison use and consequent anecdotal vulture mortalities ...

    African Journals Online (AJOL)

    Aldicarb or carbofuran were the most commonly used poisons, but strychnine is still used by about one farmer out of 10. Poison is typically used by means of distributing poisoned baits in the landscape. Furthermore, willingness to use poison in the future was highest for farmers who own large properties with high livestock ...

  7. Study on the treatment of acute thallium poisoning.

    Science.gov (United States)

    Zhang, Hong-Tao; Qiao, Bao-Ping; Liu, Bao-Ping; Zhao, Xian-Guo

    2014-05-01

    Acute thallium poisoning rarely occurs but is a serious and even fatal medical condition. Currently, patients with acute thallium poisoning are usually treated with Prussian blue and blood purification therapy. However, there are few studies about these treatments for acute thallium poisoning. Nine patients with acute thallium poisoning from 1 family were treated successfully with Prussian blue and different types of blood purification therapies and analyzed. Prussian blue combined with sequential hemodialysis, hemoperfusion and/or continuous veno-venous hemofiltration were effective for the treatment of patients with acute thallium poisoning, even after delayed diagnosis. Blood purification therapies help in the clearance of thallium in those with acute thallium poisoning. Prussian blue treatment may do the benefit during this process.

  8. Alcohol Poisoning Deaths PSA (:60)

    Centers for Disease Control (CDC) Podcasts

    This 60 second Public Service Announcement is based on the January 2015 CDC Vital Signs report. In the United States, an average of six people die every day from alcohol poisoning. Learn what you can do to prevent binge drinking and alcohol poisoning.

  9. Presentations of patients of poisoning and predictors of poisoning-related fatality: Findings from a hospital-based prospective study

    Directory of Open Access Journals (Sweden)

    Lin Hung-Jung

    2008-01-01

    Full Text Available Abstract Background Poisoning is a significant public health problem worldwide and is one of the most common reasons for visiting emergency departments (EDs, but factors that help to predict overall poisoning-related fatality have rarely been elucidated. Using 1512 subjects from a hospital-based study, we sought to describe the demographic and clinical characteristics of poisoning patients and to identify predictors for poisoning-related fatality. Methods Between January 2001 and December 2002 we prospectively recruited poisoning patients through the EDs of two medical centers in southwest Taiwan. Interviews were conducted with patients within 24 hours after admission to collect relevant information. We made comparisons between survival and fatality cases, and used logistic regressions to identify predictors of fatality. Results A total of 1512 poisoning cases were recorded at the EDs during the study period, corresponding to an average of 4.2 poisonings per 1000 ED visits. These cases involved 828 women and 684 men with a mean age of 38.8 years, although most patients were between 19 and 50 years old (66.8%, and 29.4% were 19 to 30 years. Drugs were the dominant poisoning agents involved (49.9%, followed by pesticides (14.5%. Of the 1512 patients, 63 fatalities (4.2% occurred. Paraquat exposure was associated with an extremely high fatality rate (72.1%. The significant predictors for fatality included age over 61 years, insufficient respiration, shock status, abnormal heart rate, abnormal body temperature, suicidal intent and paraquat exposure. Conclusion In addition to well-recognized risk factors for fatality in clinical settings, such as old age and abnormal vital signs, we found that suicidal intent and ingestion of paraquat were significant predictors of poisoning-related fatality. Identification of these predictors may help risk stratification and the development of preventive interventions.

  10. 14 CFR 137.39 - Economic poison dispensing.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Economic poison dispensing. 137.39 Section... AIRCRAFT OPERATIONS Operating Rules § 137.39 Economic poison dispensing. (a) Except as provided in... economic poison that is registered with the U.S. Department of Agriculture under the Federal Insecticide...

  11. Transdermal carbamate poisoning – a case of misuse

    Directory of Open Access Journals (Sweden)

    Lalit Kumar Rajbanshi

    2017-01-01

    Full Text Available Acute pesticide poisoning is a common mode of intentional self harm. Oral ingestion is the usual mode of poisoning. However, inhalation, accidental or occupational transdermal exposure leading to acute or chronic poisoning can be the other route of poisoning. It has been seen that the purpose of poising is suicidal intensity in most of the cases. We report an unusual case where the victim had acute pesticide poisoning through transdermal route that was intended for non suicidal purpose. The patient was managed successfully with immediate decontamination and adequate antidote.

  12. Benzodiazepine poisoning in elderly

    Directory of Open Access Journals (Sweden)

    Perković-Vukčević Nataša

    2016-01-01

    Full Text Available Background/Aim. Benzodiazepines are among the most frequently ingested drugs in self-poisonings. Elderly may be at greater risk compared with younger individuals due to impaired metabolism and increased sensitivity to benzodiazepines. The aim of this study was to assess toxicity of benzodiazepines in elderly attempted suicide. Methods. A retrospective study of consecutive presentations to hospital after self-poisoning with benzodiazepines was done. Collected data consisted of patient's characteristics (age, gender, benzodiazepine ingested with its blood concentrations at admission, clinical findings including vital signs and Glasgow coma score, routine blood chemistry, complications of poisoning, details of management, length of hospital stay and outcome. According the age, patients are classified as young (15-40-year old, middle aged (41-65-year old and elderly (older than 65. Results. During a 2-year observational period 387 patients were admitted because of pure benzodiazepine poisoning. The most frequently ingested drug was bromazepam, the second was diazepam. The incidence of coma was significantly higher, and the length of hospital stay significantly longer in elderly. Respiratory failure and aspiration pneumonia occurred more frequently in old age. Also, flumazenil was more frequently required in the group of elderly patients. Conclusion. Massive benzodiazepines overdose in elderly may be associated with a significant morbidity, including deep coma with aspiration pneumonia, respiratory failure, and even death. Flumazenil is indicated more often to reduce CNS depression and prevent complications of prolonged unconsciousness, but supportive treatment and proper airway management of comatose patients is the mainstay of the treatment of acute benzodiazepine poisoning.

  13. DESCRIPTION OF THE TRITIUM-PRODUCING BURNABLE ABSORBER ROD FOR THE COMMERCIAL LIGHT WATER REACTOR TTQP-1-015 Rev 19

    Energy Technology Data Exchange (ETDEWEB)

    Burns, Kimberly A.; Love, Edward F.; Thornhill, Cheryl K.

    2012-02-01

    Tritium-producing burnable absorber rods (TPBARs) used in the U.S. Department of Energy’s Tritium Readiness Program are designed to produce tritium when placed in a Westinghouse or Framatome 17x17 fuel assembly and irradiated in a pressurized water reactor (PWR). This document provides an unclassified description of the current design baseline for the TPBARs. This design baseline is currently valid only for Watts Bar reactor production cores. A description of the Lead Use TPBARs will not be covered in the text of the document, but the applicable drawings, specifications and test plan will be included in the appropriate appendices.

  14. Benzodiazepine poisoning in elderly

    OpenAIRE

    Perković-Vukčević Nataša; Vuković-Ercegović Gordana; Šegrt Zoran; Đorđević Snežana; Jović-Stošić Jasmina

    2016-01-01

    Background/Aim. Benzodiazepines are among the most frequently ingested drugs in self-poisonings. Elderly may be at greater risk compared with younger individuals due to impaired metabolism and increased sensitivity to benzodiazepines. The aim of this study was to assess toxicity of benzodiazepines in elderly attempted suicide. Methods. A retrospective study of consecutive presentations to hospital after self-poisoning with benzodiazepines was done. Collecte...

  15. VENENO-PONZOÑA, ENVENENAMIENTO-EMPONZOÑAMIENTO, ANIMALES VENENOSOS-ANIMALES PONZOÑOSOS: ¿CUÁLES SON LAS DIFERENCIAS? | VENOM-POISON, ENVENOMATION-POISONING, VENOMOUS ANIMALS-POISONOUS ANIMALS: WHAT ARE THE DIFFERENCES?

    Directory of Open Access Journals (Sweden)

    Dalmiro Cazorla-Perfetti

    2016-08-01

    Full Text Available In the specialized scientific literature of Latin America, the terms venom and poison, envenomation and poisoning, venomous animals and poisonous animals are frequently implemented improperly as synonyms. Thus, in the present communication the differences of these terms are discussed in the context of the Clinical Toxinology lexic and the need for homogenizing such a nomenclature is highlighted.

  16. Ciguatera and scombroid fish poisoning in the United States.

    Science.gov (United States)

    Pennotti, Radha; Scallan, Elaine; Backer, Lorraine; Thomas, Jerry; Angulo, Frederick J

    2013-12-01

    Ciguatera and scombroid fish poisonings are common causes of fish-related foodborne illness in the United States; however, existing surveillance systems underestimate the overall human health impact. This study aimed to describe existing data on ciguatera and scombroid fish poisonings from outbreak and poison control center reports and to estimate the overall number of ciguatera and scombroid fish-poisoning illnesses, hospitalizations, and deaths in the United States. We analyzed outbreak data from the Foodborne Disease Outbreak Surveillance Systems (FDOSS) from 2000 to 2007 and poison control center call data from the National Poison Data System (NPDS) from 2005 to 2009 for reports of ciguatera and scombroid fish poisonings. Using a statistical model with many inputs, we adjusted the outbreak data for undercounting due to underreporting and underdiagnosis to generate estimates. Underreporting and underdiagnosis multipliers were derived from the poison control call data and the published literature. Annually, an average of 15 ciguatera and 28 scombroid fish-poisoning outbreaks, involving a total of 60 and 108 ill persons, respectively, were reported to FDOSS (2000-2007). NPDS reported an average of 173 exposure calls for ciguatoxin and 200 exposure calls for scombroid fish poisoning annually (2005-2009). After adjusting for undercounting, we estimated 15,910 (90% credible interval [CrI] 4140-37,408) ciguatera fish-poisoning illnesses annually, resulting in 343 (90% CrI 69-851) hospitalizations and three deaths (90% CrI 1-7). We estimated 35,142 (90% CrI: 10,496-78,128) scombroid fish-poisoning illnesses, resulting in 162 (90% CrI 0-558) hospitalizations and 0 deaths. Ciguatera and scombroid fish poisonings affect more Americans than reported in surveillance systems. Although additional data can improve these assessments, the estimated number of illnesses caused by seafood intoxication illuminates this public health problem. Efforts, including education, can reduce

  17. Self-harm and self-poisoning in southern India

    DEFF Research Database (Denmark)

    Bose, Anuradha; Sandal Sejbaek, Camilla; Suganthy, Pearline

    2009-01-01

    over a period of 2 years. RESULTS AND CONCLUSION: The overall suicide rate was 71.4 per 100 000 population; the highest burden was among men. Most people died through hanging (81, 54%) and self-poisoning (46, 31%). Of the 46 who died from self-poisoning, 78.3% had taken pesticides and 19.7% had eaten...... poisonous plants. Eighty per cent of the self-poisoning cases obtained the poisonous substance in or in close proximity to the home, highlighting the importance of safe storage in the domestic environment. Of the 110 fatal and non-fatal self-poisoning cases, 87 (57.5%) were taken for treatment; 50 (57.......4%) went to government hospitals and 37 (42.5%) to private facilities. This indicates the importance of including the private sector in the efforts to improve case management. Furthermore, the fact that 31 (67%) of the self-poisoning patients, who eventually died, were alive after 4 h provides an incentive...

  18. Cardiac Glycoside Plants Self-Poisoning

    Directory of Open Access Journals (Sweden)

    Radenkova-Saeva J.

    2014-06-01

    Full Text Available Cardiac glycosides are found in a diverse group of plants including Digitalis purpurea and Digitalis lanata (foxgloves, Nerium oleander, Convallaria majalis (lily of the valley, Strophanthus gratus, etc. Nerium Oleander is an indoor and ornamental plant of an evergreen shrub. It’s widespread in countries with a Mediterranean climate. Oleander is one of the most poisonous plants known to humans. All parts of the nerium oleander are poisonous, primarily due to the contained cardiac glycosides - oleandrin, nerin, digitoxigenin, and olinerin of which oleandrin is the principal toxin. The bark contains the toxic substances of rosagenin which causes strychnine-like effects. Signs of poisoning appear a few hours after the adoption of the parts of the plant. Two cases of Nerium Oleander poisoning were presented. Clinical picture included gastrointestinal, cardiovascular and central nervous system effects. The clinical symptoms were characterized by nausea, vomiting, salivation, colic, diarrhoea, ventricular tachycardia, dysrhythmia, heart block, ataxia, drowsiness, muscular tremor. Treatment included administration of activated charcoal, symptomatic and supportive care.

  19. Pre-hospital treatment of acute poisonings in Oslo

    Science.gov (United States)

    Heyerdahl, Fridtjof; Hovda, Knut E; Bjornaas, Mari A; Nore, Anne K; Figueiredo, Jose CP; Ekeberg, Oivind; Jacobsen, Dag

    2008-01-01

    Background Poisoned patients are often treated in and discharged from pre-hospital health care settings. Studies of poisonings should therefore not only include hospitalized patients. Aims: To describe the acutely poisoned patients treated by ambulance personnel and in an outpatient clinic; compare patients transferred to a higher treatment level with those discharged without transfer; and study the one-week mortality after pre-hospital discharge. Methods A one-year multi-centre study with prospective inclusion of all acutely poisoned patients ≥ 16 years of age treated in ambulances, an outpatient clinic, and hospitals in Oslo. Results A total of 3757 health service contacts from 2997 poisoning episodes were recorded: 1860 were treated in ambulances, of which 15 died and 750 (40%) were discharged without transfer; 956 were treated in outpatient clinic, of which 801 (84%) were discharged without transfer; and 941 episodes were treated in hospitals. Patients discharged alive after ambulance treatment were mainly poisoned by opiates (70%), were frequently comatose (35%), had respiratory depression (37%), and many received naloxone (49%). The majority of the patients discharged from the outpatient clinic were poisoned by ethanol (55%), fewer were comatose (10%), and they rarely had respiratory depression (4%). Among the hospitalized, pharmaceutical poisonings were most common (58%), 23% were comatose, and 7% had respiratory depression. Male patients comprised 69% of the pre-hospital discharges, but only 46% of the hospitalized patients. Except for one patient, who died of a new heroin overdose two days following discharge from an ambulance, there were no deaths during the first week after the poisonings in the 90% of the pre-hospital discharged patients with known identity. Conclusion More than half of the poisoned patients treated in pre-hospital treatment settings were discharged without transfer to higher levels. These poisonings were more often caused by drug and

  20. Pre-hospital treatment of acute poisonings in Oslo

    Directory of Open Access Journals (Sweden)

    Nore Anne K

    2008-11-01

    Full Text Available Abstract Background Poisoned patients are often treated in and discharged from pre-hospital health care settings. Studies of poisonings should therefore not only include hospitalized patients. Aims: To describe the acutely poisoned patients treated by ambulance personnel and in an outpatient clinic; compare patients transferred to a higher treatment level with those discharged without transfer; and study the one-week mortality after pre-hospital discharge. Methods A one-year multi-centre study with prospective inclusion of all acutely poisoned patients ≥ 16 years of age treated in ambulances, an outpatient clinic, and hospitals in Oslo. Results A total of 3757 health service contacts from 2997 poisoning episodes were recorded: 1860 were treated in ambulances, of which 15 died and 750 (40% were discharged without transfer; 956 were treated in outpatient clinic, of which 801 (84% were discharged without transfer; and 941 episodes were treated in hospitals. Patients discharged alive after ambulance treatment were mainly poisoned by opiates (70%, were frequently comatose (35%, had respiratory depression (37%, and many received naloxone (49%. The majority of the patients discharged from the outpatient clinic were poisoned by ethanol (55%, fewer were comatose (10%, and they rarely had respiratory depression (4%. Among the hospitalized, pharmaceutical poisonings were most common (58%, 23% were comatose, and 7% had respiratory depression. Male patients comprised 69% of the pre-hospital discharges, but only 46% of the hospitalized patients. Except for one patient, who died of a new heroin overdose two days following discharge from an ambulance, there were no deaths during the first week after the poisonings in the 90% of the pre-hospital discharged patients with known identity. Conclusion More than half of the poisoned patients treated in pre-hospital treatment settings were discharged without transfer to higher levels. These poisonings were more often

  1. Extracorporeal treatment for tricyclic antidepressant poisoning

    DEFF Research Database (Denmark)

    Yates, Christopher; Galvao, Tais; Sowinski, Kevin M

    2014-01-01

    The Extracorporeal Treatments In Poisoning (EXTRIP) workgroup was formed to provide recommendations on the use of extracorporeal treatments (ECTR) in poisoning. Here, the workgroup presents its results for tricyclic antidepressants (TCAs). After an extensive literature search, using a predefined...... methodology, the subgroup responsible for this poison reviewed the articles, extracted the data, summarized findings, and proposed structured voting statements following a predetermined format. A two-round modified Delphi method was chosen to reach a consensus on voting statements and RAND...... yielding a very low quality of evidence for all recommendations. Data on 108 patients, including 12 fatalities, were abstracted. The workgroup concluded that TCAs are not dialyzable and made the following recommendation: ECTR is not recommended in severe TCA poisoning (1D). The workgroup considers...

  2. Extracorporeal treatment for acetaminophen poisoning

    DEFF Research Database (Denmark)

    Gosselin, S; Juurlink, D N; Kielstein, J T

    2014-01-01

    BACKGROUND: The Extracorporeal Treatments in Poisoning (EXTRIP) workgroup was created to provide evidence-based recommendations on the use of extracorporeal treatments (ECTR) in poisoning and the results are presented here for acetaminophen (APAP). METHODS: After a systematic review of the litera...... of NAC has not been definitively demonstrated....

  3. Poisonous plants in New Zealand: a review of those that are most commonly enquired about to the National Poisons Centre.

    Science.gov (United States)

    Slaughter, Robin J; Beasley, D Michael G; Lambie, Bruce S; Wilkins, Gerard T; Schep, Leo J

    2012-12-14

    New Zealand has a number of plants, both native and introduced, contact with which can lead to poisoning. The New Zealand National Poisons Centre (NZNPC) frequently receives enquiries regarding exposures to poisonous plants. Poisonous plants can cause harm following inadvertent ingestion, via skin contact, eye exposures or inhalation of sawdust or smoked plant matter. The purpose of this article is to determine the 15 most common poisonous plant enquiries to the NZNPC and provide a review of current literature, discussing the symptoms that might arise upon exposure to these poisonous plants and the recommended medical management of such poisonings. Call data from the NZNPC telephone collection databases regarding human plant exposures between 2003 and 2010 were analysed retrospectively. The most common plants causing human poisoning were selected as the basis for this review. An extensive literature review was also performed by systematically searching OVID MEDLINE, ISI Web of Science, Scopus and Google Scholar. Further information was obtained from book chapters, relevant news reports and web material. For the years 2003-2010 inclusive, a total of 256,969 enquiries were received by the NZNPC. Of these enquiries, 11,049 involved exposures to plants and fungi. The most common poisonous plant enquiries, in decreasing order of frequency, were: black nightshade (Solanum nigrum), arum lily (Zantedeschia aethiopica), kowhai (Sophora spp.), euphorbia (Euphorbia spp.), peace lily (Spathiphyllum spp.), agapanthus (Agapanthus spp.), stinking iris (Iris foetidissima), rhubarb (Rheum rhabarbarum), taro (Colocasia esculentum), oleander (Nerium oleander), daffodil (Narcissus spp.), hemlock (Conium maculatum), karaka (Corynocarpus laevigatus), foxglove (Digitalis purpurea) and ongaonga/New Zealand tree nettle (Urtica ferox). The combined total of enquiries for these 15 species was 2754 calls (representing approximately 25% of all enquiries regarding plant exposures). The signs

  4. Toad poisoning in three dogs: case reports

    Directory of Open Access Journals (Sweden)

    CM Barbosa

    2009-01-01

    Full Text Available Toad poisoning is frequent in dogs, but has been infrequently addressed in published case reports and review articles. Dogs can be poisoned when they bite a toad or otherwise ingest the venom. The venom effects manifest soon after the accident, since the toxin is rapidly absorbed by the mucous membrane of the digestive system. Hospital records of three dogs, diagnosed with toad poisoning, were retrospectively reviewed from January 2005 to July 2007. Poisoned dogs may present only local irritation or systemic signs in the gastrointestinal, cardiac and neurological systems. All three cases presented herein had clinical signs of gastrointestinal alterations including vomiting, sialorrhea and diarrhea. Two dogs developed abnormal cardiac rhythm and two exhibited neurological signs. A poisoned animal requires emergency care and symptomatic therapy with intense monitoring of its clinical parameters. Although there have been reports on the low mortality of dogs poisoned by toads, one animal died even after appropriate therapy. The severity of clinical signs and the risk of death must be considered by the veterinarian.

  5. An Outbreak of Foxglove Leaf Poisoning

    Directory of Open Access Journals (Sweden)

    Chun-Chi Lin

    2010-02-01

    Full Text Available Comfrey (Symphytum officinale leaves resemble those of foxglove (Digitalis purpurea when the plant is not in bloom and, therefore, cardiac glycoside poisoning may occur when people confuse foxglove with comfrey. We report an outbreak of foxglove leaf poisoning following the use of alleged “comfrey” herbal tea. Nine patients were involved and initially presented with nausea, vomiting, diarrhea and dizziness. Significant cardiotoxicity developed later among the 3 patients who also had mild hyperkalemia. Peak serum digoxin concentration measured by immunoassay was elevated in all patients and ranged from 4.4 ng/mL to 139.5 ng/mL. Patients with severe cardiotoxicity were treated with temporary cardiac pacing. Moreover, 40–80 mg of digoxin-specific antibody therapy was given without any effect. All patients recovered uneventfully. Our report highlights the potential risk of misidentification of herbs; in this case, D. purpurea was mistaken for S. officinale. Physicians should be aware that cardiac glycoside poisoning could arise from such misidentification. Public education about the toxicity of D. purpurea poisoning may reduce the risk of misidentification and subsequent poisoning.

  6. Radiologic placement of Hickman catheters

    International Nuclear Information System (INIS)

    Robertson, L.J.; Mauro, M.A.; Jaques, P.F.

    1988-01-01

    Hickman catheter inserter has previously been predominantly accomplished surgically by means of venous cutdown or percutaneous placement in the operating room. The authors describe their method and results for 55 consecutive percutaneous placements of Hickman catheters in the interventional radiology suite. Complication rates were comparable to those for surgical techniques. Radiologic placement resulted in increased convenience, decreased time and cost of insertion, and super fluoroscopic control of catheter placement and any special manipulations. Modern angiographic materials provide safer access to the subclavian vein than traditional methods. The authors conclude that radiologic placement of Hickman catheters offers significant advantages over traditional surgical placement

  7. Is Your Child Safe from Lead Poisoning?

    Centers for Disease Control (CDC) Podcasts

    2008-10-02

    In this podcast, Dr. Mary Jean Brown, chief of CDC's Lead Poisoning and Prevention Program, discusses the importance of testing children for lead poisoning, who should be tested, and what parents can do to prevent lead poisoning.  Created: 10/2/2008 by National Center for Environmental Health (NCEH).   Date Released: 10/2/2008.

  8. Is poisoning a problem in South Sudan?

    African Journals Online (AJOL)

    2011-11-04

    Nov 4, 2011 ... (e.g. mesothelioma caused by contact with asbestos). Criminal act of poisoning: e.g. “spiking” of a drink at a party. Poisoning in uganda. When I was working in Uganda I saw several cases of poisoning with organophosphates and was horrified by the mortality. Almost ten years ago, we carried out a simple.

  9. Alcohol Withdrawal Mimicking Organophosphate Poisoning

    Directory of Open Access Journals (Sweden)

    Nezihat Rana Disel

    2014-02-01

    Full Text Available Organophosphates, which can cause occupational poisoning due to inappropriate personal protective measures, are widely used insecticides in agricultural regions of southern Turkey. Therefore, the classical clinical findings of this cholinergic poisoning are myosis, excessive secretions, bradicardia and fasciculations are easy to be recognized by local medical stuff. Diseases and conditions related to alcoholism such as mental and social impairments, coma, toxicity, withdrawal, and delirium are frequent causes of emergency visits of chronic alcoholic patients. Here we present a case diagnosed and treated as organophosphate poisoning although it was an alcohol withdrawal in the beginning and became delirium tremens, due to similar symptoms.

  10. Acetone poisoning

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/002480.htm Acetone poisoning To use the sharing features on this page, please enable JavaScript. Acetone is a chemical used in many household products. ...

  11. Carbon Monoxide Poisoning in Children

    Directory of Open Access Journals (Sweden)

    Chi-Hsiun Cho

    2008-08-01

    Conclusion: Children with CO poisoning had good outcomes in this series. Although improperly vented exhaust from water heaters and house fires were the most common causes, intentional poisoning by parents through charcoal burning was also an important factor. Early identification of DNS risk factors might help to provide better care.

  12. Transient performance and design aspects of low boron PWR cores with increased utilization of burnable absorbers

    International Nuclear Information System (INIS)

    Papukchiev, Angel; Schaefer, Anselm

    2008-01-01

    In conventional pressurized water reactor (PWR) designs, soluble boron is used for reactivity control over core fuel cycle. As high boron concentrations have significant impact on reactivity feedback properties and core transient behaviour, design changes to reduce boron concentration in the reactor coolant are of general interest in view of improving PWR inherent safety. In order to assess the potential advantages of such strategies in current PWRs, two low boron core configurations based on fuel with increased utilization of gadolinium and erbium burnable absorbers have been developed. The new PWR designs permit to reduce the natural boron concentration in reactor coolant at begin of cycle to 518 (Gd) and 805 (Er) ppm. An innovative low boron core design methodology was implemented combining a simplified reactivity balance search procedure with a core design approach based on detailed 3D diffusion calculations. Fuel cross sections needed for nuclear libraries were generated using the 2D lattice code HELIOS [2] and full core configurations were modelled with the 3D diffusion code QUABOX/CUBBOX [3]. For dynamic 3D calculations, the coupled code system ATHLET - QUABOX/CUBBOX was used [4]. The new cores meet German acceptance criteria regarding stuck rod, departure from nucleate boiling ratio (DNBR), shutdown margin, and maximal linear power. For the assessment of potential safety advantages of the new cores, comparative analyses were performed for three PWR core designs: the already mentioned two low boron designs and a standard design. The improved safety performance of the low boron cores in anticipated transients without scram (ATWS), boron dilution scenarios and beyond design basis accidents (BDBA) has already been reported in [1, 2 and 3]. This paper gives a short reminder on the results obtained. Moreover, it deals not only with the potential advantages, but also addresses the drawbacks of the new PWR configurations - complex core design, increased power

  13. Comparison of different methods of calculating pinwise power

    International Nuclear Information System (INIS)

    Powers, M.A.

    1987-01-01

    One objective of a nuclear utility is the capability to predict the peak rod power in reload core design accurately and efficiently. This capability can be utilized in the verification of vendor results and the development of utility reload methodology. The MBS code solves the diffusion equation in x-y geometry by the finite different technique. The MBS code utilizes coarser meshes but reaches the same level of accuracy as a pin-by-pin model. The CASMO code utilizes pin profiles at specified core conditions, which are superimposed on the MBS diffusion theory results for pin power predictions. Placement of the burnable poison rods in the loading pattern are crucial to minimizing peak pin power. Westinghouse utilizes a code called TURTLE, licensed by the US Nuclear Regulatory Commission and proprietary to Westinghouse. The MBS code, with macroscopic cross sections from CASMO, can be run with coarser meshes and macroscopic depletion and still reach the same level of accuracy as a pin-by-pin code such as PDQ-7 or TURTLE. The MBS input preparation is simpler than PDQ-7 or TURTLE-type input preparation

  14. Amitraz poisoning: case report

    Directory of Open Access Journals (Sweden)

    Jaime Alexander Molina-Bolaños

    2017-10-01

    Full Text Available Amitraz is an insecticide compound used worldwide for controlling pests, especially in agricultural and livestock areas. However, amitraz poisoning in Colombia is rare. This article reports the case of an 18-year-old female patient who was admitted in the emergency service 3 hours after the intake of an unknown amount of Triatox® (amitraz. The patient presented with a depressed level of consciousness, respiratory distress, hypotension, bradycardia, myosis and metabolic acidosis compensated with respiratory alkalosis. Initial treatment was provided using life support measures in the emergency ward, and subsequent transfer and support in the intensive care unit. She was discharged 24 hours after admission. This case considers the clinical similarity between amitraz poisoning and poisoning caused by other more frequent toxic compounds such as carbamates, organophosphates and opioids, which require different management.

  15. Snakebite poisoning in Spain.

    Science.gov (United States)

    Martín-Sierra, Cristina; Nogué-Xarau, Santiago; Pinillos Echeverría, Miguel Ángel; Rey Pecharromán, José Miguel

    2018-01-01

    Emergencies due to snakebites, although unusual in Spain, are potentially serious. Of the 13 species native to the Iberian peninsula, only 5 are poisonous: 2 belong to the Colubridae family and 3 to the Viperidae family. Bites from these venemous snakes can be life-threatening, but the venomous species can be easily identified by attending to certain physical traits. Signs denoting poisoning from vipers, and the appropriate treatment to follow, have changed in recent years.

  16. PROFILE OF POISONING CASES IN A TERTIARY CARE HOSPITAL , TELANGANA , INDIA

    Directory of Open Access Journals (Sweden)

    Naresh

    2015-05-01

    Full Text Available BACKGROUND : Poisoning with various substances is an important cause of death and disability worldwide . The types of poisons that are encountered in the emergency medicine departments encompass a wide range of substances . Apparently , geographic location , socio - demographic factors , ease of availability of poisons and many other cryptic factors contribute to the wide spectrum of substances that cause poisoning . Pesticides , drugs and chemicals are reported to be the most commo nly used poisons in India . Management of poisoning is quite challenging for the health care professionals globally . Factors such as the uncertainty in the identification of allegedly consumed poison , varied clinical features and the need for timely access to specific information for treatment , complicates poisoning management . This study was therefore conducted to explore the clinical features , management and outcomes of poisoning cases reporting to a tertiary care centre in south India . OBJECTIVE : To ident ify the spectrum of poisons and evaluate their clinical manifestations , medical management and clinical outcomes . METHODOLOGY : All cases of poisoning that were reported at a tertiary care hospital in South India for a period of 18 months from January 1 , 20 13 to June 30 , 2014 were included in this study . A data abstraction sheet was designed to document demographic details ( age and gender , poison consumed , duration of stay in the hospital , clinical features , treatment administered , need for life support and patient outcomes . RESULTS : A total of 145 poisoning cases were reported during the study period . Among them , 58 . 5% were males and 41 . 3% were females . Majority of victims were in the age group of 21 - 30 years . Intentional poisoning was observed in 86 . 2% , whereas the rest were accidental poisonings . Organophosphorus ( OP poisoning was the most common poisoning encountered in this study . It accounted for 25 . 5% of the total

  17. Lead poisoning

    Energy Technology Data Exchange (ETDEWEB)

    Beijers, J A

    1952-01-01

    Three cases of acute lead poisoning of cattle herds via ingestion are reported, and reference is made to several other incidents of lead in both humans and animals. The quantity of lead which was found in the livers of the dead cows varied from 6.5 to 19 mg/kg, while 1160 mg/kg of lead in the liver was found for a young cow which was poisoned experimentally with 5 gms of lead acetate per day; hence, there appears to be great variability in the amounts deposited that can lead to intoxication and death. No evidence was found for a lead seam around the teeth, prophyrinuria, or basophil granules in the erythrocytes during acute or chronic lead poisoning of cattle or horses examined. Reference is made to attempts of finding the boundary line between increased lead absorption and lead intoxication in humans, and an examination of 60 laborers in an offset-printing office containing a great deal of inhalable lead (0.16 to 1.9 mg/cu m air) is reviewed. Physical deviation, basophylic granulation of erythrocytes, increased lead content of the urine, and porphyrinuria only indicate an increased absorption of lead; the use of the term intoxication is justified if, in addition, there are complaints of lack of appetite, constipation, fatigue, abdominal pain, and emaciation.

  18. Epidemiology of acute poisoning in children presenting to the poisoning treatment center at Ain Shams University in Cairo, Egypt, 2009-2013.

    Science.gov (United States)

    Azab, Sonya M S; Hirshon, Jon Mark; Hirshon, John Mark; Hayes, Bryan D; El-Setouhy, Maged; Smith, Gordon S; Sakr, Mahmoud Lotfy; Tawfik, Hany; Klein-Schwartz, Wendy

    2016-01-01

    Pediatric poisonings represent a major and preventable cause of morbidity and mortality throughout the world. Epidemiologic information about poisoning among children in many lower- and middle-income countries is scarce. This study describes the epidemiology of acute poisonings in children presenting to Ain Shams University's Poisoning Treatment Center (ASU-PTC) in Cairo and determines the causative agents and characteristics of acute poisoning in several pediatric age groups. This retrospective study involved acutely poisoned patients, 0-18 years of age, who presented to the ASU-PTC between 1 January 2009 and 31 December 2013. Data were extracted from electronic records maintained by the ASU-PTC. Collected data included demographics, substance of exposure, circumstances of the poisoning, patient disposition, and outcome. During the 5-year study period, 38 470 patients meeting our criteria were treated by the ASU-PTC; 19 987 (52%) were younger than 6 years of age; 4196 (11%) were 6-12 years; and 14 287 (37%) were >12 years. Unintentional poisoning accounted for 68.5% of the ingestions, though among adolescents 84.1% of ingestions were with self-harm intent. In all age groups, the most frequent causative drugs were non-opioid analgesics, antipyretics, and antirheumatics. The most common nonpharmaceutical agents were corrosives in preschool children and pesticides in adolescents. Most patients had no/minor effects (29 174 [75.8%]); hospitalization rates were highest among adolescents. There were 119 deaths (case fatality rate of 0.3), primarily from pesticide ingestion. Poisoning in preschool children is mainly unintentional and commonly due to nonpharmaceutical agents whereas poisoning in adolescents is mainly intentional (self-harm). Pesticides, mainly organophosphorous compounds and carbamates, were the most frequent agents leading to morbidity and mortality.

  19. The good and the bad of poisonous plants: an introduction to the USDA-ARS Poisonous Plant Research Laboratory.

    Science.gov (United States)

    Welch, Kevin D; Panter, Kip E; Gardner, Dale R; Stegelmeier, Bryan L

    2012-06-01

    This article provides an overview of the Poisonous Plant Research Laboratory (PPRL), about the unique services and activities of the PPRL and the potential assistance that they can provide to plant poisoning incidences. The PPRL is a federal research laboratory. It is part of the Agricultural Research Service, the in-house research arm of the U.S. Department of Agriculture. The mission of the PPRL is to identify toxic plants and their toxic compounds, determine how the plants poison animals, and develop diagnostic and prognostic procedures for poisoned animals. Furthermore, the PPRL's mission is to identify the conditions under which poisoning occurs and develop management strategies and treatments to reduce losses. Information obtained through research efforts at the PPRL is mostly used by the livestock industry, natural resource managers, veterinarians, chemists, plant and animal scientists, extension personnel, and other state and federal agencies. PPRL currently has 9 scientists and 17 support staff, representing various disciplines consisting of toxicology, reproductive toxicology, veterinary medicine, chemistry, animal science, range science, and plant physiology. This team of scientists provides an interdisciplinary approach to applied and basic research to develop solutions to plant intoxications. While the mission of the PPRL primarily impacts the livestock industry, spinoff benefits such as development of animal models, isolation and characterization of novel compounds, elucidation of biological and molecular mechanisms of action, national and international collaborations, and outreach efforts are significant to biomedical researchers. The staff at the PPRL has extensive knowledge regarding a number of poisonous plants. Although the focus of their knowledge is on plants that affect livestock, oftentimes, these plants are also poisonous to humans, and thus, similar principles could apply for cases of human poisonings. Consequently, the information provided

  20. The analytic method for calculating the control rod worth

    International Nuclear Information System (INIS)

    Kim, Han Gon; Lee, Byeong Ho; Chang, Soon Heung

    1989-01-01

    We calculated the control rod worth in this paper. To avoid complexity, we did not consider burnable poisons and soluble boron. The system was localized within one assembly. The control rod was treated as not an absorber but an another boundary. Thus all of the group constants were unchanged before and after control rod insertion. And we discussed the method for calculation of the reactivity of the whole core

  1. Assessment of the linear power level in fuel rods irradiated in the CALLISTO loop in the high flux materials testing reactor BR2

    International Nuclear Information System (INIS)

    Malambu, E.; Raedt, Ch. de; Weber, M.

    1999-01-01

    The pressurized light-water-cooled testing facility CALLISTO was designed to test the behaviour of advanced fuel rods (UO 2 or MOX, possibly with burnable poisons) under conditions representative of actual LWRs up to high burn-up rates. The accurate determination of the fission powers in each of the nine rods, and hence of the burn-up values, is carried out according to a rather elaborate procedure. (author)

  2. Nuclear fuel clad clothed with burnable poison and obtainment process

    International Nuclear Information System (INIS)

    Diez, P.; Netter, P.

    1994-01-01

    This clad has preferentially on its inner surface a boron compound such boron carbide or boron nitrogen deposited by Chemical Vapor Deposition or by Physical Vapor Deposition without any temperature elevation injurious to its mechanical properties. 3 figs

  3. Lead poisoning: The invisible disease

    Science.gov (United States)

    Friend, Milton

    1989-01-01

    Lead poisoning is an intoxication resulting from absorption of hazardous levels of lead into body tissues. Lead pellets from shot shells, when ingested, are the most common source of lead poisoning in migratory birds. Other far less common sources include lead fishing sinkers, mine wastes, paint pigments, bullets, and other lead objects that are swallowed.

  4. webPOISONCONTROL: can poison control be automated?

    Science.gov (United States)

    Litovitz, Toby; Benson, Blaine E; Smolinske, Susan

    2016-08-01

    A free webPOISONCONTROL app allows the public to determine the appropriate triage of poison ingestions without calling poison control. If accepted and safe, this alternative expands access to reliable poison control services to those who prefer the Internet over the telephone. This study assesses feasibility, safety, and user-acceptance of automated online triage of asymptomatic, nonsuicidal poison ingestion cases. The user provides substance name, amount, age, and weight in an automated online tool or downloadable app, and is given a specific triage recommendation to stay home, go to the emergency department, or call poison control for further guidance. Safety was determined by assessing outcomes of consecutive home-triaged cases with follow-up and by confirming the correct application of algorithms. Case completion times and user perceptions of speed and ease of use were measures of user-acceptance. Of 9256 cases, 73.3% were triaged to home, 2.1% to an emergency department, and 24.5% directed to call poison control. Children younger than 6 years were involved in 75.2% of cases. Automated follow-up was done in 31.2% of home-triaged cases; 82.3% of these had no effect. No major or fatal outcomes were reported. More than 91% of survey respondents found the tool quick and easy to use. Median case completion time was 4.1 minutes. webPOISONCONTROL augments traditional poison control services by providing automated, accurate online access to case-specific triage and first aid guidance for poison ingestions. It is safe, quick, and easy to use. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

  5. Gasoline poisoning

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/002806.htm Gasoline poisoning To use the sharing features on this ... This article discusses the harmful effects from swallowing gasoline or breathing in its fumes. This article is ...

  6. Sachet poisoning

    Science.gov (United States)

    ... of perfumed powder or a mix of dried flowers, herbs, spices, and aromatic wood shavings (potpourri). Some ... further instructions. This is a free and confidential service. All local poison control centers in the United ...

  7. Organophosphorus pesticide poisoning : cases and developments

    NARCIS (Netherlands)

    Aardema, H.; Ligtenberg, J. J. M.; Peters-Polman, O. M.; Tulleken, J. E.; Zijlstra, J. G.; Meertens, John H. J. M.

    Self-poisoning with organophosphate pesticides is a major health problem world-wide. Through the inhibition of acetylcholinesterase, organophosphorus poisoning is characterised by the clinical picture of acute cholinergic crisis. Other manifestations are the intermediate neurotoxic syndrome and

  8. Nitric Acid Poisoning: Case Report

    International Nuclear Information System (INIS)

    Quintero Giraldo, Maria Paulina; Quiceno Calderon, William de Jesus; Melo Arango Catalina

    2011-01-01

    Nitric acid (HNO 3 ) is a corrosive fluid that, when in contact with reducing agents, generates nitrogen oxides that are responsible for inhalation poisoning. We present two cases of poisoning from nitric acid gas inhalation resulting from occupational exposure. Imaging findings were similar in both cases, consistent with adult respiratory distress syndrome (ARDS): bilaterally diffuse alveolar opacities on the chest X-ray and a cobblestone pattern on computed tomography (CT).one of the patients died while the other evolved satisfactorily after treatment with n-acetyl cysteine and mechanical ventilation. The diagnosis of nitric acid poisoning was made on the basis of the history of exposure and the way in which the radiological findings evolved.

  9. Comparison of poison exposure data: NHIS and TESS data.

    Science.gov (United States)

    Polivka, Barbara J; Elliott, Michael B; Wolowich, William R

    2002-01-01

    To identify age-adjusted poisoning episode rates, and poison control center contacts due to poisonings in children under 6 years old based on 1997-1999 National Health Interview Survey data; and compare findings with 1997-1999 Toxic Exposure Surveillance System data. Secondary analysis of National Health Interview Survey poisoning episode data for children 5 years and younger. Respondents were asked about poison exposures during the previous 3 months. Based on National Health Interview Survey population weighted data there were 196/10,000 poisonings to young children < 6 years. These exposures resulted primarily from harmful solid or liquid substances. A poison control center was called in 86% of exposures to children < 4 years, but only in 70% of the 4-5 year old exposures. The odds of a poison control center not being called were 3.2 times greater for 4-5 year olds (compared to < or = 3 years) and 4.5 times greater for African-American (compared with White-Americans). Comparison of National Health Interview Survey data with data in the 1997-1999 Annual Reports of the Toxic Exposure Surveillance System revealed the number of estimated exposures in the National Health Interview Survey data were approximately half those reported in the Toxic Exposure Surveillance System data. In both datasets, children 1-2 years of age had the highest percent of poisoning exposures. Using multiple datasets to explore poisoning rates in young children provides a broader perspective. Differences in findings reflect divergent data collection methods and biases inherent in each database. Although the majority of National Health Interview Survey respondents reporting contacting a poison control center for a poisoning exposure, rates are lower in specific subgroups indicating a need for targeted educational efforts.

  10. Differences in Poisoning Mortality in the United States, 2003–2007: Epidemiology of Poisoning Deaths Classified as Unintentional, Suicide or Homicide

    Science.gov (United States)

    Muazzam, Sana; Swahn, Monica H.; Alamgir, Hasanat; Nasrullah, Muazzam

    2012-01-01

    Introduction Poisoning, specifically unintentional poisoning, is a major public health problem in the United States (U.S.). Published literature that presents epidemiology of all forms of poisoning mortalities (i.e., unintentional, suicide, homicide) together is limited. This report presents data and summarizes the evidence on poisoning mortality by demographic and geographic characteristics to describe the burden of poisoning mortality and the differences among sub-populations in the U.S. for a 5-year period. Methods Using mortality data from the Center for Disease Control and Prevention's Web-based Injury Statistics Query and Reporting System, we presented the age-specific and age-adjusted unintentional and intentional (suicide, homicide) poisoning mortality rates by sex, age, race, and state of residence for the most recent years (2003–2007) of available data. Annual percentage changes in deaths and rates were calculated, and linear regression using natural log were used for time-trend analysis. Results There were 121,367 (rate=8.18 per 100,000) unintentional poisoning deaths. Overall, the unintentional poisoning mortality rate increased by 46.9%, from 6.7 per 100,000 in 2003 to 9.8 per100.000 in 2007, with the highest mortality rate among those aged 40–59 (rate=15.36), males (rate=11.02) and whites (rate=8.68). New Mexico (rate=18.2) had the highest rate. Unintentional poisoning mortality rate increased significantly among both sexes, and all racial groups except blacks (p<0.05 time-related trend for rate). Among a total of 29,469 (rate=1.97) suicidal poisoning deaths, the rate increased by 9.9%, from 1.9 per 100,000 in 2003 to 2.1 per 100,000 in 2007, with the highest rate among those aged 40–59 (rate=3.92), males (rate=2.20) and whites (rate=2.24). Nevada (rate=3.9) had the highest rate. Mortality rate increased significantly among females and whites only (p<0.05 time-related trend for rate). There were 463 (rate=0.03) homicidal poisoning deaths and the

  11. An outbreak of foxglove leaf poisoning.

    Science.gov (United States)

    Lin, Chun-Chi; Yang, Chen-Chang; Phua, Dong-Haur; Deng, Jou-Fang; Lu, Li-Hua

    2010-02-01

    Comfrey (Symphytum officinale) leaves resemble those of foxglove (Digitalis purpurea) when the plant is not in bloom and, therefore, cardiac glycoside poisoning may occur when people confuse foxglove with comfrey. We report an outbreak of foxglove leaf poisoning following the use of alleged "comfrey" herbal tea. Nine patients were involved and initially presented with nausea, vomiting, diarrhea and dizziness. Significant cardiotoxicity developed later among the 3 patients who also had mild hyperkalemia. Peak serum digoxin concentration measured by immunoassay was elevated in all patients and ranged from 4.4 ng/mL to 139.5 ng/mL. Patients with severe cardiotoxicity were treated with temporary cardiac pacing. Moreover, 40-80 mg of digoxin-specific antibody therapy was given without any effect. All patients recovered uneventfully. Our report highlights the potential risk of misidentification of herbs; in this case, D. purpurea was mistaken for S. officinale. Physicians should be aware that cardiac glycoside poisoning could arise from such misidentification. Public education about the toxicity of D. purpurea poisoning may reduce the risk of misidentification and subsequent poisoning. Copyright 2010 Elsevier. Published by Elsevier B.V. All rights reserved.

  12. Gastrolobium spp. poisoning in sheep: A case report

    Science.gov (United States)

    This report describes the history and investigation of a suspected plant poisoning event in Western Australia where fifteen sheep died. One of the poisoned sheep was necropsied and gross and microscopic pathology of the poisoned sheep is described. Monofluoroacetate was detected in rumen contents ...

  13. Iodine-adsorbent poisoning: FY-82 summary report

    International Nuclear Information System (INIS)

    Jolley, J.G.; Casper, L.A.

    1982-10-01

    Along with its positive attributes as an adsorbent of radioiodine in nuclear plant air cleaning systems, silver zeolite has the disadvantage of being susceptible to poisoning. (Poisoning is defined as the reduction of efficiency in radioiodine removal.) In view of the gravimetric and infrared spectroscopy data presented, π-bonded hydrocarbons, oxygenated organics, and halocarbons appear to be probable poisons of a silver zeolite filtration system

  14. A Narrative Review of Acute Adult Poisoning in Iran

    Directory of Open Access Journals (Sweden)

    Samira Alinejad

    2017-07-01

    Full Text Available Poisoning is a frequent cause of referral to medical emergencies and a major health problem around the world, especially in developing countries. We aimed to review the epidemiology and pattern of adult poisoning in Iran in order to facilitate the early diagnosis and management of poisoning. The pattern of poisoning is different in various parts of Iran. Pharmaceutical compounds were the most common cause of poisoning in most parts of Iran. Pesticide-related toxicities were more common in northern agricultural regions, whereas bites and stings were seen more commonly in southern Iran. Carbon monoxide poisoning was common in cities with many motor vehicles such as Tehran and in colder climates such as in northern and western regions due to inadequately vented gas appliances such as stoves and heaters. Majoon Birjandi (containing cannabis is a unique substance used in eastern Iran. Poisoning by opioids, tramadol, and pesticides (organophosphate and aluminum phosphide has remained a common hazard in Iran. Poisoning-associated morbidity and mortality rates vary by region and have changed over time due to the introduction of new drugs and chemicals. Early diagnosis and proper treatment may be lifesaving; thus, understanding the general pattern of poisoning in different regions is important.

  15. Poison control center - Emergency number (image)

    Science.gov (United States)

    For a poison emergency call 1-800-222-1222 anywhere in the United States. This national hotline number will let you ... is a free and confidential service. All local poison control centers in the U.S. use this national ...

  16. Poison Prevention

    Science.gov (United States)

    ... Safely , for more information . If you use an e-cigarette, keep the liquid nicotine refills locked up out ... to a child. See Liquid Nicotine Used in E-Cigarettes Can Kill Children . Never place poisonous products in ...

  17. Deodorant poisoning

    Science.gov (United States)

    ... Poisoning and Drug Overdose . 4th ed. Philadelphia, PA: Elsevier Saunders; 2007:chap 100. Farmer B, Seger DL. ... Textbook of Critical Care . 7th ed. Philadelphia, PA: Elsevier; 2017:chap 153. Meehan TJ. Approach to the ...

  18. [Acute lithium poisoning: epidemiology, clinical characteristics, and treatment].

    Science.gov (United States)

    Burguera Vion, Víctor; Montes, José Manuel; Del Rey, José Manuel; Rivera-Gorrín, Maite; Rodao, José María; Tenorio, Maite; Saiz-Ruiz, Jerónimo; Liaño, Fernando

    2017-02-01

    Lithium continues to be the treatment of choice for bipolar disorder. Acute lithium poisoning is a potentially serious event. We present a retrospective observational significative study of episodes of acute lithium poisoning during a 52- month period. Poisoning was defined by a blood lithium concentration of 1.5 mEq/L or higher. We analyzed treatment and epidemiologic and clinical characteristics of 70 episodes were identified (incidence density among treated patients, 1.76 per 100 patient-years). The most frequent cause of lithium poisoning was a concurrent medical condition (46%). Most poisonings were mild (74.2%), but neurologic involvement was identified in 40.3%. Electrocardiographic abnormalities were found in 8 cases. Acute renal failure, found in 23 patients (37.1%), was mild in most cases, although 11 patients required hemodialysis. We concluded that acute lithium poisoning is an uncommon complication, but risk needs to be lowered. Patients should be warned to avoid dosage errors and to take special care during concurrent illnesses and while taking other medications.

  19. Prospects of poisoning – a multi facet study

    Directory of Open Access Journals (Sweden)

    Pradeep K. Mishra

    2017-06-01

    Full Text Available Aim of the study is to find out demographic profile, clinical characteristics and analysis of poison in clinical set up. The study carried out in Sri Aurobindo Medical College and PG Institute Indore, Madhya Pradesh. Total 75 cases of poisoning were studied for demographic profile, vitals (BP, pulse, heart rate, pupils, etc., clinical features (such as vomiting, salivation, consciousness, etc., type of poison and its analysis. Results : Poisoning was more common in cases between 15 and 25 years of age, in males than in females and in Hindu religion. Poisoning cases were predominantly from rural areas and in married people. Majority of cases were discharged after proper treatment and counseling. Altered vitals and clinical features were found in most of the cases. Organophosphate and aluminum phosphide compound were evaluated in most of the cases. Conclusions : Preventive measures should be applied through educating people, proper counseling, promoting poison information centers, and introducing separate toxicological units in hospitals.

  20. Personality traits in persons with manganese poisoning

    Energy Technology Data Exchange (ETDEWEB)

    Platonov, A A

    1976-10-01

    Results of studies with the Minnesota Multiphasic Personality Inventory (MMPI) in 3 groups of arc welders with various degrees of manganese poisoning (22 symptom-free, 23 with functional disturbances, 55 with organic symptoms) and 50 controls were discussed. There was a close relation between the severity of the poisoning and quantitative and qualitative personality changes. Personality tests are considered a useful addition to the clinical diagnosis of chronic manganese poisoning.

  1. Placement of acid spoil materials

    Energy Technology Data Exchange (ETDEWEB)

    Pionke, H B; Rogowski, A S

    1982-06-01

    Potentially there are several chemical and hydrologic problems associated with placement of acid spoil materials. The rationale for a deep placement well below the soil surface, and preferably below a water table, is to prevent or minimize oxidation of pyrite to sulfuric acid and associated salts by reducing the supply of oxygen. If, however, substantial sulfuric acid or associated salts are already contained within the spoil because of present or previous mining, handling and reclamation operations (or if large supplies of indigenous salts exist, placement below a water table) may actually increase the rate of acid and salt leaching. Specific placement of acid- and salt-containing spoil should be aimed at preventing contact with percolating water or rising water tables. We recommend placement based on chemical and physical spoil properties that may affect water percolation O/sub 2/ diffusion rates in the profile. Both the deeper placement of acid spoil and coarser particle size can substantially reduce the amount of acid drainage. Placement above the water table with emphasis on percolate control may be better for high sulfate spoils, while placement below the non-fluctuating water table may be better for pyritic spoils.

  2. Hemlock (Conium Maculatum) Poisoning In A Child.

    Science.gov (United States)

    Konca, Capan; Kahramaner, Zelal; Bosnak, Mehmet; Kocamaz, Halil

    2014-03-01

    Poison hemlock (Conium maculatum) is a plant that is poisonous for humans and animals. Accidental ingestion of the plant may result in central nervous system depression, respiratory failure, acute rhabdomyolysis, acute renal failure and even death. The main treatment of hemlock poisoning is supportive care. The case of a 6-year-old girl who was admitted to the emergency department with complaints of burning sensation in mouth, hypersalivation, tremor in hands and ataxia after ingestion of poison hemlock is presented here with clinical and laboratory features. In this case, we aim to report that accidental ingestion of plants resembling vegetables that are consumed daily can lead to serious complications and even death.

  3. Hemlock (Conium Maculatum Poisoning In A Child

    Directory of Open Access Journals (Sweden)

    Capan KONCA

    2014-03-01

    Full Text Available Poison hemlock (Conium maculatum is a plant that is poisonous for humans and animals. Accidental ingestion of the plant may result in central nervous system depression, respiratory failure, acute rhabdomyolysis, acute renal failure and even death. The main treatment of hemlock poisoning is supportive care. The case of a 6-year-old girl who was admitted to the emergency department with complaints of burning sensation in mouth, hypersalivation, tremor in hands and ataxia after ingestion of poison hemlock is presented here with clinical and laboratory features. In this case, we aim to report that accidental ingestion of plants resembling vegetables that are consumed daily can lead to serious complications and even death.

  4. Diagnosis & Treatment of Poisoning by Pesticides.

    Science.gov (United States)

    Environmental Protection Agency, Washington, DC. Office of Pesticide Programs.

    This report succinctly discusses the steps necessary to diagnose and treat poisoning from pesticides, especially organophosphates, carbamates and chlorinated hydrocarbons. Immediate and continuing steps in the care of poisoning victims are outlined with supportive information on where to locate emergency assistance. (CS)

  5. Vital Signs-Alcohol Poisoning Deaths

    Centers for Disease Control (CDC) Podcasts

    2015-01-06

    This podcast is based on the January 2015 CDC Vital Signs report. In the United States, an average of six people die every day from alcohol poisoning. Learn what you can do to prevent binge drinking and alcohol poisoning.  Created: 1/6/2015 by National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP).   Date Released: 1/6/2015.

  6. Do poison center triage guidelines affect healthcare facility referrals?

    Science.gov (United States)

    Benson, B E; Smith, C A; McKinney, P E; Litovitz, T L; Tandberg, W D

    2001-01-01

    The purpose of this study was to determine the extent to which poison center triage guidelines influence healthcare facility referral rates for acute, unintentional acetaminophen-only poisoning and acute, unintentional adult formulation iron poisoning. Managers of US poison centers were interviewed by telephone to determine their center's triage threshold value (mg/kg) for acute iron and acute acetaminophen poisoning in 1997. Triage threshold values and healthcare facility referral rates were fit to a univariate logistic regression model for acetaminophen and iron using maximum likelihood estimation. Triage threshold values ranged from 120-201 mg/kg (acetaminophen) and 16-61 mg/kg (iron). Referral rates ranged from 3.1% to 24% (acetaminophen) and 3.7% to 46.7% (iron). There was a statistically significant inverse relationship between the triage value and the referral rate for acetaminophen (p variability in poison center triage values and referral rates for iron and acetaminophen poisoning. Guidelines can account for a meaningful proportion of referral variation. Their influence appears to be substance dependent. These data suggest that efforts to determine and utilize the highest, safe, triage threshold value could substantially decrease healthcare costs for poisonings as long as patient medical outcomes are not compromised.

  7. Interpersonal Problem-Solving Deficits in Self-Poisoning Patients.

    Science.gov (United States)

    McLeavey, Breda C.; And Others

    1987-01-01

    Compared self-poisoning patients with psychiatric patients and nonpatient controls on problem-solving skills and locus of control. The psychiatric and self-poisoning groups showed deficits on interpersonal problem solving compared with nonpatient controls. The self-poisoning group performed below or at the level of the psychiatric group. Locus of…

  8. Differences in Poisoning Mortality in the United States, 2003–2007: Epidemiology of Poisoning Deaths Classified as Unintentional, Suicide or Homicide

    Directory of Open Access Journals (Sweden)

    Sana Muazzam

    2012-08-01

    Full Text Available Introduction: Poisoning, specifically unintentional poisoning, is a major public health problem in the United States (U.S.. Published literature that presents epidemiology of all forms of poisoning mortalities (i.e., unintentional, suicide, homicide together is limited. This report presents data and summarizes the evidence on poisoning mortality by demographic and geographic characteristics to describe the burden of poisoning mortality and the differences among sub-populations in the U.S. for a 5-year period.Methods: Using mortality data from the Center for Disease Control and Prevention’s Web-based Injury Statistics Query and Reporting System, we presented the age-specific and age-adjusted unintentional and intentional (suicide, homicide poisoning mortality rates by sex, age, race, and state of residence for the most recent years (2003–2007 of available data. Annual percentage changes in deaths and rates were calculated, and linear regression using natural log were used for time-trend analysis.Results: There were 121,367 (rate¼8.18 per 100,000 unintentional poisoning deaths. Overall, the unintentional poisoning mortality rate increased by 46.9%, from 6.7 per 100,000 in 2003 to 9.8 per100.000 in 2007, with the highest mortality rate among those aged 40–59 (rate¼15.36, males(rate¼11.02 and whites (rate¼8.68. New Mexico (rate¼18.2 had the highest rate. Unintentional poisoning mortality rate increased significantly among both sexes, and all racial groups except blacks (p,0.05 time-related trend for rate. Among a total of 29,469 (rate¼1.97 suicidal poisoning deaths, the rate increased by 9.9%, from 1.9 per 100,000 in 2003 to 2.1 per 100,000 in 2007, with the highest rate among those aged 40–59 (rate¼3.92, males (rate¼2.20 and whites (rate¼2.24. Nevada(rate¼3.9 had the highest rate. Mortality rate increased significantly among females and whites only (p,0.05 time-related trend for rate. There were 463 (rate¼0.03 homicidal poisoning

  9. Full Core Burn-up Calculation at JRR-3 with MVP-BURN

    International Nuclear Information System (INIS)

    Komeda, Masao; Yamamoto, Kazuyoshi; Kusunoki, Tsuyoshi

    2008-01-01

    Research reactors use a burnable poison to suppress an excess reactivity in the beginning of reactor lifetime. The JRR-3 (Japan Research Reactor No.3) has used cadmium wires of radius 0.02 cm as a burnable poison. This report describes burn-up calculations of plate fuel models and full core models with MVP-BURN, which is a burn-up calculation code using Monte Carlo method and has been developed in JAEA (Japan Atomic Energy Agency). As the results of calculations of plate models, between a model composed of one burn-up region along the radius direction and a model composed of a few burn-up regions along the radius direction, the effective absorption cross section of 113 Cd has had different tendency on reaching approximate 40. day (10000 MWd/t). And as results of calculations of full core model, it has been indicated that k eff is almost same till approximate 80. day (22000 MWd/t) between a model composed of one burn-up region along the vertical direction and a model composed of a few burn-up regions along the vertical direction. However difference of 113 Cd burn-up becomes pronounced and each k eff makes a difference after 80. day. (authors)

  10. Research on reactor physics using the Very High Temperature Reactor Critical Assembly (VHTRC)

    International Nuclear Information System (INIS)

    Akino, Fujiyoshi

    1988-01-01

    The High Temperature Engineering Test Reactor (HTTR), of which the research and development are advanced by Japan Atomic Energy Research Institute, is planned to apply for the permission of installation in fiscal year 1988, and to start the construction in the latter half of fisical year 1989. As the duty of reactor physics research, the accuracy of the nuclear data is to be confirmed, the validity of the nuclear design techniques is to be inspected, and the nuclear safety of the HTTR core design is to be verified. Therefore, by using the VHTRC, the experimental data of the reactor physics quantities are acquired, such as critical mass, the reactivity worth of simulated control rods and burnable poison rods, the temperature factor of reactivity, power distribution and so on, and the experiment and analysis are advanced. The cores built up in the VHTRC so far were three kinds having different lattice forms and degrees of uranium enrichment. The calculated critical mass was smaller by 1-5 % than the measured values. As to the power distribution and the reactivity worth of burnable poison rods, the prospect of satisfying the required accuracy for the design of the HTTR core was obtained. The experiment using a new core having axially different enrichment degree is planned. (K.I.)

  11. Mixed PWR core loadings with inert matrix Pu-fuel assemblies

    International Nuclear Information System (INIS)

    Stanculescu, A.; Kasemeyer, U.; Paratte, J.-M.; Chawla, R.

    1999-01-01

    The most efficient way to enhance plutonium consumption in light water reactors is to eliminate the production of plutonium all together. This requirement leads to fuel concepts in which the uranium is replaced by an inert matrix. At PSI, studies have focused on employing ZrO 2 as inert matrix. Adding a burnable poison to such a fuel proves to be necessary. As a result of scoping studies, Er 2 O 3 was identified as the most suitable burnable poison material. The results of whole-core three-dimensional neutronics analyses indicated, for a present-day 1000 MW e pressurised water reactor, the feasibility of an asymptotic equilibrium four-batch cycle fuelled solely with the proposed PuO 2 -Er 2 O 3 -ZrO 2 inert matrix fuel (IMF). The present paper presents the results of more recent investigations related to 'real-life' situations, which call for transition configurations in which mixed IMF and UO 2 assembly loadings must be considered. To determine the influence of the introduction of IMF assemblies on the characteristics of a UO 2 -fuelled core, three-dimensional full-core calculations have been performed for a present-day 1000 MW e PWR containing up to 12 optimised IMF assemblies. (author)

  12. Hospitalized poisonings after renal transplantation in the United States

    Directory of Open Access Journals (Sweden)

    Viola Rebecca A

    2002-11-01

    Full Text Available Abstract Background The national incidence of and risk factors for hospitalized poisonings in renal transplant recipients has not been reported. Methods Historical cohort study of 39,628 renal transplant recipients in the United States Renal Data System between 1 July 1994 and 30 June 1998. Associations with time to hospitalizations for a primary diagnosis of poisonings (ICD-9 codes 960.x-989.x within three years after renal transplant were assessed by Cox Regression. Results The incidence of hospitalized poisonings was 2.3 patients per 1000 person years. The most frequent causes of poisonings were immunosuppressive agents (25.3%, analgesics/antipyretics (14.1%, psychotropic agents (10.0%, and insulin/antidiabetic agents (7.1%. In Cox Regression analysis, low body mass index (BMI, 28.3 kg/m2, adjusted hazard ratio (AHR, 3.02, 95% CI, 1.45–6.28, and allograft rejection, AHR 1.83, 95% CI, 1.15–2.89, were the only factors independently associated with hospitalized poisonings. Hospitalized poisonings were independently associated with increased mortality (AHR, 1.54, 95% CI 1.22–1.92, p = 0.002. Conclusions Hospitalized poisonings were associated with increased mortality after renal transplantation. However, almost all reported poisonings in renal transplant recipients were due to the use of prescribed medications. Allograft rejection and low BMI were the only independent risk factors for poisonings identified in this population.

  13. Alkaloid-Containing Plants Poisonous to Cattle and Horses in Europe.

    Science.gov (United States)

    Cortinovis, Cristina; Caloni, Francesca

    2015-12-08

    Alkaloids, nitrogen-containing secondary plant metabolites, are of major interest to veterinary toxicology because of their occurrence in plant species commonly involved in animal poisoning. Based on epidemiological data, the poisoning of cattle and horses by alkaloid-containing plants is a relatively common occurrence in Europe. Poisoning may occur when the plants contaminate hay or silage or when forage alternatives are unavailable. Cattle and horses are particularly at risk of poisoning by Colchicum autumnale (meadow saffron), Conium maculatum (poison hemlock), Datura stramonium (jimson weed), Equisetum palustre (marsh horsetail), Senecio spp. (ragwort and groundsel) and Taxus baccata (European yew). This review of poisonous alkaloid-containing plants describes the distribution of these plants, conditions under which poisoning occurs, active toxic principles involved and subsequent clinical signs observed.

  14. Finding of CT and clinical in paraquat poisoning pulmonary injury

    International Nuclear Information System (INIS)

    He Zaifang; Li Hongbing; Cheng Shoulin; Li Qixiang; Huang Zhen; Zeng Jianguo

    2012-01-01

    Objective: To investigate the CT features of pulmonary injury in paraquat poisoning. Methods: The chest CT image of lung injury in 6 cases of paraquat poisoning were analyzed retrospectively. According to different period of poisoning, the 6 cases were divided into 3 types:the early stage of poisoning (within 2 d), the middle stage of poisoning (3-14 d), the late stage of poisoning (>14 d). A comparison between CT signs and the pathological features of patients was made. Results: Among this 6 cases, 3 cases died, 2 cases pulmonary fibrosis was noted, 1 cases recovered. According to different period of poisoning, the 6 cases were divided into 3 stages: in the early stage of poisoning (within 2 d), 3 cases of all patients showed nothing remarkable, 2 cases showed ground-glass opacity, 1 case showed fuzzy lung-marking.In the middle stage of poisoning (3-14 d), all 6 cases showed ground-glass opacity, mosaic attenuation; 6 cases showed pulmonary consolidation; 4 cases showed subpleural lines; 4 cases showed bronchiectasis; 2 cases showed mid-lower pleural effusion. In the late stage of poisoning (>14 d), 4 cases showed pulmonary consolidation and pulmonary fibrosis, 3 cases showed ground-glass opacity and mosaic attenuation, 1 case showed mid-lower pleural effusion; 1 case showed mediastinal emphysema. Conclusion: The clinical pathology process of paraquat poisoning was in line with CT finding which was related with clinical stage and was helpful for clinical assessment of paraquat poisoning promptly and to guide the clinical treatment. (authors)

  15. 49 CFR 172.555 - POISON INHALATION HAZARD placard.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false POISON INHALATION HAZARD placard. 172.555 Section... REQUIREMENTS, AND SECURITY PLANS Placarding § 172.555 POISON INHALATION HAZARD placard. (a) Except for size and color, the POISON INHALATION HAZARD placard must be as follows: ER22JY97.025 (b) In addition to...

  16. Risk factors for acute pesticide poisoning in Sri Lanka

    DEFF Research Database (Denmark)

    van der Hoek, Wim; Konradsen, Flemming

    2005-01-01

    This report describes the characteristics of patients with acute pesticide poisoning in a rural area of Sri Lanka and, for intentional self-poisoning cases, explores the relative importance of the different determinants. Data were collected for 239 acute pesticide-poisoning cases, which were...... admitted to two rural hospitals in Sri Lanka. Sociodemographic characteristics, negative life events and agricultural practices of the intentional self-poisoning cases were compared with a control group. Most cases occurred among young adults and the large majority (84%) was because of intentional self-poisoning....... Case fatality was 18% with extremely high case fatality for poisoning with the insecticide endosulfan and the herbicide paraquat. Cases were generally younger than controls, of lower educational status and were more often unemployed. No agricultural risk factors were found but a family history...

  17. 49 CFR 172.429 - POISON INHALATION HAZARD label.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false POISON INHALATION HAZARD label. 172.429 Section... REQUIREMENTS, AND SECURITY PLANS Labeling § 172.429 POISON INHALATION HAZARD label. (a) Except for size and color, the POISON INHALATION HAZARD label must be as follows: ER22JY97.023 (b) In addition to complying...

  18. Epidemiology of acute poisoning in children presenting to the poisoning treatment center at Ain Shams University in Cairo, Egypt, 2009–2013

    Science.gov (United States)

    Azab, Sonya M. S.; Hirshon, Jon Mark; Hayes, Bryan D.; El-Setouhy, Maged; Smith, Gordon S.; Sakr, Mahmoud Lotfy; Tawfik, Hany; Klein-Schwartz, Wendy

    2016-01-01

    Introduction Pediatric poisonings represent a major and preventable cause of morbidity and mortality throughout the world. Epidemiologic information about poisoning among children in many lower- and middle-income countries is scarce. This study describes the epidemiology of acute poisonings in children presenting to Ain Shams University's Poisoning Treatment Center (ASU-PTC) in Cairo and determines the causative agents and characteristics of acute poisoning in several pediatric age groups. Methods This retrospective study involved acutely poisoned patients, 0 to 18 years of age, who presented to the ASU-PTC between 1/1/2009 and 12/31/2013. Data were extracted from electronic records maintained by the ASU-PTC. Collected data included demographics, substance of exposure, circumstances of the poisoning, patient disposition, and outcome. Results During the 5-year study period, 38,470 patients meeting our criteria were treated by the ASU-PTC; 19,987 (52%) were younger than 6 years of age; 4,196 (11%) were 6 to 12 years; and 14,287 (37%) were >12 years. Unintentional poisoning accounted for 68.5% of the ingestions, though among adolescents 84.1% of ingestions were with self-harm intent. In all age groups, the most frequent causative drugs were non-opioid analgesics, antipyretics, and antirheumatics. The most common nonpharmaceutical agents were corrosives in preschool children and pesticides in adolescents. Most patients had no/minor effects (29,174 [75.8%]); hospitalization rates were highest among adolescents. There were 119 deaths (case fatality rate of 0.3), primarily from pesticide ingestion. Conclusion Poisoning in preschool children is mainly unintentional and commonly due to nonpharmaceutical agents while poisoning in adolescents is mainly intentional (self-harm). Pesticides, mainly organophosphorous compounds and carbamates, were the most frequent agent leading to morbidity and mortality. PMID:26653953

  19. Alcohol Poisoning Deaths PSA (:60)

    Centers for Disease Control (CDC) Podcasts

    2015-01-06

    This 60 second Public Service Announcement is based on the January 2015 CDC Vital Signs report. In the United States, an average of six people die every day from alcohol poisoning. Learn what you can do to prevent binge drinking and alcohol poisoning.  Created: 1/6/2015 by National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP).   Date Released: 1/6/2015.

  20. Acute selenium poisoning in lambs

    Energy Technology Data Exchange (ETDEWEB)

    Gabbedy, B J; Dickson, J

    1969-10-01

    An outbreak of sodium selenite poisoning is reported in which 180 of 190 six-weeks-old lambs died. The estimated dose rate of the selenium was 6.4 mg/kg body weight. Liver concentrations of selenium at the time of poisoning averaged 64 ppM and 15 days later liver and kidney concentrations of selenium averaged 26 ppM and 7.4 ppM respectively.

  1. Tropane alkaloids in food: poisoning incidents

    NARCIS (Netherlands)

    Adamse, P.; Egmond, van H.P.; Noordam, M.Y.; Mulder, P.P.J.; Nijs, de W.C.M.

    2014-01-01

    A large number of wild and cultured plants produce secondary metabolites that can be toxic to humans and animals. The present study aims to provide insight into the routes of (un)intentional poisonings of humans by tropane alkaloids. Poisonings of humans by tropane alkaloids occur as unintended

  2. Erbium: alternative poison? stabilisation additive? what future?

    International Nuclear Information System (INIS)

    Porta, J.; Asou, M.

    2001-01-01

    Erbium was proposed as alternative poison to gadolinium at a very early stage. The potential interest of this poison compared to gadolinium is that it presents a relatively low ( 167 Er) absorption cross section in the thermal range and a non-negligible resonance integral that lead to a relatively slow consumption kinetic rather adapted to long or even very long cycles. The poisoning mode adapted to this poison, homogeneous in low concentration (< 3 %), does not downgrade the power distribution, on the one hand, as the absorption is low and spatially homogeneous, and the thermal conductivity, on the other hand, as the addition in the fuel oxide is in low quantity. A review of knowledge acquired as regards Er, from the 1960's to now, is presented. (authors)

  3. Acute Poisoning with Methadone (Dolphin (Review

    Directory of Open Access Journals (Sweden)

    Georgy A. Livanov

    2017-01-01

    Full Text Available Most publications report on the use of methadone as a medication, however an increase of the illegal use of methadone has been demonstrated worldwide over the recent years, thus increasing the number of hospitalizations due to acute poisoning with this synthetic opioid. The aim of the present review was to summarize current data on the mechanisms of toxicity, selective toxicity, toxicokinetics and toxicodynamics of methadone (Dolphin. The involvement of CNS, respiratory, cardiovascular and urinary systems in acute poisoning with methadone was dis- cussed. The practice of use of methadone in many countries as a medicine for the replacement therapy for opiate addicts was analyzed. In addition, it was suggested that the results of the use of naloxone antidote therapy in acute opioid poisoning do not always clearly demonstrate its sufficient efficacy. Ways to improve of the intensive therapy of severe acute poisoning by methadone were substantiated; in addition to general critical care methods, treatment with a complex metabolic antihypoxant cytoflavin should be considered. 

  4. Hemlock (Conium Maculatum) Poisoning In A Child

    OpenAIRE

    KONCA, Capan; KAHRAMANER, Zelal; BOSNAK, Mehmet; KOCAMAZ, Halil

    2016-01-01

    SUMMARY Poison hemlock (Conium maculatum) is a plant that is poisonous for humans and animals. Accidental ingestion of the plant may result in central nervous system depression, respiratory failure, acute rhabdomyolysis, acute renal failure and even death. The main treatment of hemlock poisoning is supportive care. The case of a 6-year-old girl who was admitted to the emergency department with complaints of burning sensation in mouth, hypersalivation, tremor in hands and ataxia after ingestio...

  5. Metal Poisons for Criticality in Waste Streams

    International Nuclear Information System (INIS)

    Williamson, T.G.; Goslen, A.Q.

    1996-01-01

    Many of the wastes from processing fissile materials contain metals which may serve as nuclear criticality poisons. It would be advantageous to the criticality evaluation of these wastes to demonstrate that the poisons remain with the fissile materials and to demonstrate an always safe poison-to-fissile ratio. The first task, demonstrating that the materials stay together, is the job of the chemist, the second, calculating an always safe ratio, is an object of this paper

  6. Organophosphate acetylcholine esterase inhibitor poisoning from a home-made shampoo.

    Science.gov (United States)

    Sadaka, Yair; Broides, Arnon; Tzion, Raffi Lev; Lifshitz, Matitiahu

    2011-07-01

    Organophosphate acetylcholine esterase inhibitor poisoning is a major health problem in children. We report an unusual cause of organophosphate acetylcholine esterase inhibitor poisoning. Two children were admitted to the pediatric intensive care unit due to organophosphate acetylcholine esterase inhibitor poisoning after exposure from a home-made shampoo that was used for the treatment of head lice. Owing to no obvious source of poisoning, the diagnosis of organophosphate acetylcholine esterase inhibitor poisoning in one of these patients was delayed. Both patients had an uneventful recovery. Organophosphate acetylcholine esterase inhibitor poisoning from home-made shampoo is possible. In cases where the mode of poisoning is unclear, direct questioning about the use of home-made shampoo is warranted, in these cases the skin and particularly the scalp should be rinsed thoroughly as soon as possible.

  7. Alkaloid-Containing Plants Poisonous to Cattle and Horses in Europe

    Directory of Open Access Journals (Sweden)

    Cristina Cortinovis

    2015-12-01

    Full Text Available Alkaloids, nitrogen-containing secondary plant metabolites, are of major interest to veterinary toxicology because of their occurrence in plant species commonly involved in animal poisoning. Based on epidemiological data, the poisoning of cattle and horses by alkaloid-containing plants is a relatively common occurrence in Europe. Poisoning may occur when the plants contaminate hay or silage or when forage alternatives are unavailable. Cattle and horses are particularly at risk of poisoning by Colchicum autumnale (meadow saffron, Conium maculatum (poison hemlock, Datura stramonium (jimson weed, Equisetum palustre (marsh horsetail, Senecio spp. (ragwort and groundsel and Taxus baccata (European yew. This review of poisonous alkaloid-containing plants describes the distribution of these plants, conditions under which poisoning occurs, active toxic principles involved and subsequent clinical signs observed.

  8. Hair dye poisoning

    Science.gov (United States)

    Hair tint poisoning ... Different types of hair dye contain different harmful ingredients. The harmful ingredients in permanent dyes are: Naphthylamine Other aromatic amino compounds Phenylenediamines Toluene ...

  9. Recent Advances in the Treatment of Organophosphorous Poisonings

    Directory of Open Access Journals (Sweden)

    Mahdi Balali-Mood

    2012-06-01

    Full Text Available Organophosphorous compounds have been employed as pesticides and chemical warfare nerve agents. Toxicity of organophosphorous compounds is a result of excessive cholinergic stimulation through inhibition of acetyl cholinesterase. Clinical manifestations include cholinergic syndromes, central nervous system and cardiovascular disorders. Organophosphorous pesticide poisonings are common in developing worlds including Iran and Sri Lanka. Nerve agents were used during the Iraq-Iran war in 1983-1988 and in a terrorist attack in Japan in 1994-1995. Following decontamination, depending on the severity of intoxication the administration of atropine to counteract muscarinic over-stimulation, and an oxime to reactivate acetyl cholinesterase are indicated. Supportive and intensive care therapy including diazepam to control convulsions and mechanical respiration may be required. Recent investigations have revealed that intravenous infusion of sodium bicarbonate to produce mild to moderate alkalinization is effective. Gacyclidine; an antiglutamatergic compound, was also proved to be beneficial in conjunction with atropine, pralidoxime, and diazepam in nerve agent poisoning. Intravenous magnesium sulfate decreased hospitalization duration and improved outcomes in patients with organophosphorous poisoning. Bio-scavengers including fresh frozen plasma or albumin have recently been suggested as a useful therapy through clearing of free organophosphates. Hemofiltration and antioxidants are also suggested for organophosphorous poisoning. Recombinant bacterial phosphotriesterases and hydrolases that are able to transfer organophosphorous-degrading enzymes are very promising in delayed treatment of organophosphorous poisoning. Recently, encapsulation of drugs or enzymes in nanocarriers has also been proposed. Given the signs and symptoms of organophosphorous poisoning, health professionals should remain updated about the recent advances in treatment of

  10. Recent Advances in the Treatment of Organophosphorous Poisonings

    Science.gov (United States)

    Balali-Mood, Mahdi; Saber, Hamidreza

    2012-01-01

    Organophosphorous compounds have been employed as pesticides and chemical warfare nerve agents. Toxicity of organophosphorous compounds is a result of excessive cholinergic stimulation through inhibition of acetyl cholinesterase. Clinical manifestations include cholinergic syndromes, central nervous system and cardiovascular disorders. Organophosphorous pesticide poisonings are common in developing worlds including Iran and Sri Lanka. Nerve agents were used during the Iraq-Iran war in 1983-1988 and in a terrorist attack in Japan in 1994-1995. Following decontamination, depending on the severity of intoxication the administration of atropine to counteract muscarinic over-stimulation, and an oxime to reactivate acetyl cholinesterase are indicated. Supportive and intensive care therapy including diazepam to control convulsions and mechanical respiration may be required. Recent investigations have revealed that intravenous infusion of sodium bicarbonate to produce mild to moderate alkalinization is effective. Gacyclidine; an antiglutamatergic compound, was also proved to be beneficial in conjunction with atropine, pralidoxime, and diazepam in nerve agent poisoning. Intravenous magnesium sulfate decreased hospitalization duration and improved outcomes in patients with organophosphorous poisoning. Bio-scavengers including fresh frozen plasma or albumin have recently been suggested as a useful therapy through clearing of free organophosphates. Hemofiltration and antioxidants are also suggested for organophosphorous poisoning. Recombinant bacterial phosphotriesterases and hydrolases that are able to transfer organophosphorous-degrading enzymes are very promising in delayed treatment of organophosphorous poisoning. Recently, encapsulation of drugs or enzymes in nanocarriers has also been proposed. Given the signs and symptoms of organophosphorous poisoning, health professionals should remain updated about the recent advances in treatment of organophosphorous poisoning

  11. Why good placements matter: Pre-placement and placement risk factors associated with mental health disorders in pre-school children in foster care.

    Science.gov (United States)

    Hillen, Thomas; Gafson, Leonie

    2015-07-01

    Pre-school children placed in local authority care show elevated rates of mental health disorders when compared to the general population. This study investigated risk factors for mental health disorders relating to the period prior to entering care and while in care. A representative sample of 43 children in care aged 0-72 months in an inner London borough underwent comprehensive multidimensional assessments. Presence of emotional, behavioural, attachment and adaptive disorders was ascertained. Exposure to two pre-placement risk factors and six placement risk factors was compared between children with and without a disorder. A total of 26 children (60.5%) had at least one mental health disorder. The two pre-placement risk factors, multiple types of maltreatment and entry into care after the age of 6 months, were both significantly associated with mental health disorders. The three placement risk factors of sudden placement moves, multiple placement moves and child-carer alienation showed a significant association with mental health disorders. There was a strong correlation between the number of risk factors and the number of co-morbid mental health disorders per child (r = .67, p school mental health. © The Author(s) 2014.

  12. Initial Management of Poisoned Patients in Emergency Medical Services and Non-poisoning Hospitals in Tehran: The Comparison between Expected and Performed Managements

    Directory of Open Access Journals (Sweden)

    Hossein Hassanian-Moghadam

    2014-06-01

    Full Text Available Background: There is no clear data on the adherence of emergency medical services (EMS paramedics and hospital staff rather than those working in poisoning centers to the guidelines for managing acutely poisoned patients in developing countries. Methods: During a 6-month period, all EMS-managed poisoned patients along with those initially managed in a non-poisoning center before being referred to a poisoning hospital in Tehran, Iran, were instructed. Then the indications for administrating the activated charcoal (AC as well as performing gastric lavage (GL and tracheal intubation were studied and compared to the recommended guidelines. Results: A total of 3347 cases, including 1859 males (55.6%, were evaluated. There were significant differences between expected and performed endotracheal intubations in both EMS and other medical centers (P-value = 0.002 and 0.001, respectively as well as the administration of GL and AC in other medical centers (P-values= 0.003 and 0.03, respectively. Conclusion: More extensive educational programs should be established to improve the preliminary management of poisoned patients performed by EMS paramedics and staff of hospitals other than poisoning centers.

  13. Detection of Poisonous Herbs by Terahertz Time-Domain Spectroscopy

    Science.gov (United States)

    Zhang, H.; Li, Z.; Chen, T.; Liu, J.-J.

    2018-03-01

    The aim of this paper is the application of terahertz (THz) spectroscopy combined with chemometrics techniques to distinguish poisonous and non-poisonous herbs which both have a similar appearance. Spectra of one poisonous and two non-poisonous herbs (Gelsemium elegans, Lonicera japonica Thunb, and Ficus Hirta Vahl) were obtained in the range 0.2-1.4 THz by using a THz time-domain spectroscopy system. Principal component analysis (PCA) was used for feature extraction. The prediction accuracy of classification is between 97.78 to 100%. The results demonstrate an efficient and applicative method to distinguish poisonous herbs, and it may be implemented by using THz spectroscopy combined with chemometric algorithms.

  14. Russula subnigricans Poisoning: From Gastrointestinal Symptoms to Rhabdomyolysis.

    Science.gov (United States)

    Lin, Shide; Mu, Maoyuan; Yang, Fangwan; Yang, Chunfei

    2015-09-01

    Wild mushroom poisoning is often reported to cause acute liver or renal failure. However, acute rhabdomyolysis caused by wild mushroom poisoning has rarely been reported. We describe 7 patients of 1 family with Russula subnigricans Hongo poisoning. Their clinical manifestations varied from gastrointestinal symptoms to rhabdomyolysis, with 1 fatality. Our report provides supporting evidence that rhabdomyolysis may result from ingestion of R subnigricans mushrooms. A key to survival for patients with rhabdomyolysis caused by R subnigricans poisoning may be early recognition and intensive supportive care. Copyright © 2015 Wilderness Medical Society. Published by Elsevier Inc. All rights reserved.

  15. Residential carbon monoxide poisoning from motor vehicles.

    Science.gov (United States)

    Hampson, Neil B

    2011-01-01

    Although morbidity and mortality from accidental carbon monoxide (CO) poisoning are high in the United States, identification of common but poorly recognized sources should help prevention efforts. The study aimed to describe CO poisoning of home occupants due to a vehicle left running in an attached garage. News stories reporting incidents of US CO poisoning were collected daily from March 2007 to September 2009 via a news.Google.com search and data extracted. Patients were individuals reported in the media to have been poisoned with CO in their home by a vehicle running in the attached garage. Main outcome measures were frequency of occurrence, geographic distribution, patient demographics, and mortality. Of 837 CO poisoning incidents reported in US news media over 2 and a half years, 59 (8%) were the result of a vehicle left running in the garage. The elderly were disproportionately affected, with incidents most common in states with larger elderly populations and 29% of cases with age specified occurring in individuals older than 80 years. Among those older than 80 years, 15 of 17 were found dead at the scene. Residential CO poisoning from a vehicle running in the garage is common, disproportionately affects the elderly, has a high mortality rate, and should be preventable with a residential CO alarm. Copyright © 2011 Elsevier Inc. All rights reserved.

  16. Management of acute organophosphorus pesticide poisoning.

    Science.gov (United States)

    Eddleston, Michael; Buckley, Nick A; Eyer, Peter; Dawson, Andrew H

    2008-02-16

    Organophosphorus pesticide self-poisoning is an important clinical problem in rural regions of the developing world, and kills an estimated 200,000 people every year. Unintentional poisoning kills far fewer people but is a problem in places where highly toxic organophosphorus pesticides are available. Medical management is difficult, with case fatality generally more than 15%. We describe the limited evidence that can guide therapy and the factors that should be considered when designing further clinical studies. 50 years after first use, we still do not know how the core treatments--atropine, oximes, and diazepam--should best be given. Important constraints in the collection of useful data have included the late recognition of great variability in activity and action of the individual pesticides, and the care needed cholinesterase assays for results to be comparable between studies. However, consensus suggests that early resuscitation with atropine, oxygen, respiratory support, and fluids is needed to improve oxygen delivery to tissues. The role of oximes is not completely clear; they might benefit only patients poisoned by specific pesticides or patients with moderate poisoning. Small studies suggest benefit from new treatments such as magnesium sulphate, but much larger trials are needed. Gastric lavage could have a role but should only be undertaken once the patient is stable. Randomised controlled trials are underway in rural Asia to assess the effectiveness of these therapies. However, some organophosphorus pesticides might prove very difficult to treat with current therapies, such that bans on particular pesticides could be the only method to substantially reduce the case fatality after poisoning. Improved medical management of organophosphorus poisoning should result in a reduction in worldwide deaths from suicide.

  17. [Poison cases and types of poisons based on data obtained of patients hospitalized from 1995-2009 with acute poisoning in the second internal ward in a multi-profile provincial hospital in Tarnow].

    Science.gov (United States)

    Lata, Stanisław; Janiszewski, Jacek

    2010-01-01

    The thesis presents a short history and organization of an acute poisoning centre in the1995 functioning within the internal diseases department in a multi-profile provincial hospital. The data show the number of patients treated beetween 1995-2009 an the types of toxic substances that caused poisoning. The conclusions presented refer to the role of the centre to help people suffering from acute poisoning within the city of Tarnow.

  18. Sediment Placement Areas 2012

    Data.gov (United States)

    California Natural Resource Agency — Dredge material placement sites (DMPS), including active, inactive, proposed and historical placement sites. Dataset covers US Army Corps of Engineers San Francisco...

  19. Sediment Placement Areas 2012

    Data.gov (United States)

    California Department of Resources — Dredge material placement sites (DMPS), including active, inactive, proposed and historical placement sites. Dataset covers US Army Corps of Engineers San Francisco...

  20. [Poisoning with Jatropha curcas: 24 cases reported to Paris and Marseille Poisons Centers].

    Science.gov (United States)

    Langrand, J; Médernach, C; Schmitt, C; Blanc-Brisset, I; Villa, A F; de Haro, L; Garnier, R

    2015-03-01

    Jatropha curcas L. is an inedible plant belonging to the Euphorbiaceae family that is growing in subtropical zones of all continents. We report a series of 24 cases of poisoning with J. curcas seeds or fruits reported to poison centers in Paris and Marseille between December 2000 and June 2014. Fifteen adults and 9 children ingested J. curcas seeds or fruits. All patients experienced gastrointestinal disorders, within the first hours following ingestion: nausea, vomiting, diarrhea and abdominal pain. Laboratory investigations performed in 10 patients revealed minor abnormalities: CK elevation (8 cases), dehydration (5 cases) with moderate elevation of serum creatinine levels (3 cases), and mildly increased serum bilirubin (8 cases). Complete remission of all clinical signs was observed within 48 hours in the 20 cases for which the outcome was known. Previously published cases of J. curcas poisoning were very similar to ours: As in our series, gastrointestinal disorders were always present. They were sometimes associated with neurological or cardiovascular signs, and hepatic or renal disorders; these were generally interpreted as complications of severe gastroenteritis, although direct toxic effects could not be formally excluded. In most cases, simple supportive measures were sufficient to ensure complete recovery within 24-48 hours. J Curcas poisoning incidence is certainly increasing because the plant is cultivated to produce biodiesel and is now largely present in most subtropical countries. As a consequence, local health professionals should be informed of the toxic properties of this plant.

  1. 76 FR 9585 - Poison Control Program

    Science.gov (United States)

    2011-02-18

    ... delay or gap in poison center services. The State of New York has determined that the Research... Noncompetitive Replacement Awards to the Research Foundation of SUNY and the New York City Health & Hospitals... the Research Foundation of SUNY d.b.a. the Upstate New York Poison Control Center. HRSA will also...

  2. Validation of a Poison Prevention Program.

    Science.gov (United States)

    Gill, Noel C.; Braden, Barbara T.

    Two way analyses of variance and cross-group descriptive comparisons assessed the effectiveness of the Siop Poison Prevention Program, which included an educational program and the use of warning labels, on improving verbal and visual discrimination of poisonous and nonpoisonous products for preschool children. The study sample consisted of 156…

  3. VIGILANCE POISON: Illegal poisoning and lead intoxication are the main factors affecting avian scavenger survival in the Pyrenees (France).

    Science.gov (United States)

    Berny, Philippe; Vilagines, Lydia; Cugnasse, Jean-Marc; Mastain, Olivier; Chollet, Jean-Yves; Joncour, Guy; Razin, Martine

    2015-08-01

    A specific surveillance program has been set up to monitor avian scavenger populations in the French Pyrenean Mountains, hosting a high proportion of the French populations. The two main purposes of the study were to identify all causes of death and to investigate poisoning cases. All 170 birds found dead during the 7-year program were submitted to full necropsy, X-Ray, parasitological investigations and consistent analytical toxicology screenings (Cholinesterase inhibitors, anticoagulant rodenticides, organochlorine insecticides, Pb, Cd). Over the study period, 8 Bearded Vultures, 120 Griffon Vultures, 8 Egyptian Vultures and 34 Red kites were eventually collected. Mortality events were often multifactorial, but poisoning was by far the most common cause of death (24.1%), followed by trauma/fall (12%), bacterial diseases and starvation (8%) and electrocution (6%). Illicit use of banned pesticides was identified as a common cause of poisoning (53% of all poisoning cases) and lead poisoning was also identified as a significant toxicant issue (17% of all poisoning cases). Lead isotopic signature could be associated primarily with ammunition. Last, a positive association between trauma and lead contamination was detected, indicating that lead could be a significant contributor to different causes of death. These results urge for severe restrictions on the use of lead ammunition to prevent scavengers from detrimental exposure. Copyright © 2015 Elsevier Inc. All rights reserved.

  4. Pharmacological treatment of cardiac glycoside poisoning.

    Science.gov (United States)

    Roberts, Darren M; Gallapatthy, Gamini; Dunuwille, Asunga; Chan, Betty S

    2016-03-01

    Cardiac glycosides are an important cause of poisoning, reflecting their widespread clinical usage and presence in natural sources. Poisoning can manifest as varying degrees of toxicity. Predominant clinical features include gastrointestinal signs, bradycardia and heart block. Death occurs from ventricular fibrillation or tachycardia. A wide range of treatments have been used, the more common including activated charcoal, atropine, β-adrenoceptor agonists, temporary pacing, anti-digoxin Fab and magnesium, and more novel agents include fructose-1,6-diphosphate (clinical trial in progress) and anticalin. However, even in the case of those treatments that have been in use for decades, there is debate regarding their efficacy, the indications and dosage that optimizes outcomes. This contributes to variability in use across the world. Another factor influencing usage is access. Barriers to access include the requirement for transfer to a specialized centre (for example, to receive temporary pacing) or financial resources (for example, anti-digoxin Fab in resource poor countries). Recent data suggest that existing methods for calculating the dose of anti-digoxin Fab in digoxin poisoning overstate the dose required, and that its efficacy may be minimal in patients with chronic digoxin poisoning. Cheaper and effective medicines are required, in particular for the treatment of yellow oleander poisoning which is problematic in resource poor countries. © 2015 The British Pharmacological Society.

  5. Methadone Related Poisoning on the Rise in Tehran, Iran

    Directory of Open Access Journals (Sweden)

    Kambiz Soltaninejad

    2014-09-01

    Full Text Available Background: In Iran, methadone has been used for methadone maintenance treatment (MMT as well as analgesic treatment in pain clinics. Recently, there are some reports regarding accidental and intentional methadone poisonings and deaths. The aim of this study was to evaluate the trend of methadone poisonings and deaths during a 10-year period in Tehran, Iran. Methods: This was a retrospective cross-sectional study over 2000 to 2010. Patients with a documented methadone poisoning who were admitted in Loghman Hakim Hospital Poison Center in Tehran, Iran were identified and included in the study. The data including patients’ age, gender, ingested dose, co-ingestants, intention of ingestion and outcome were extracted from the patients’ medical records. Results: During the study period, 1426 cases of methadone poisoning were recorded, of which, 1041 cases (73% were men. Thirty-six cases (2.5% died. Mean age of the patients was 29.9 ± 17 years. In 476 cases, the intention of poisoning could not be determined, and in the remaining, the intention was misuse (n = 273, 28.7%, suicide (n = 254, 26.7%, accidental (n = 245, 25.8% and abuse (n = 178, 18.8%. Mean of the ingested dose of methadone was 120.6 ± 306.8 mg. The incidence of acute methadone poisoning per one million population of Tehran was 0.43 in 2000 that rose to 37.62 in 2010. Conclusion: The results indicate that methadone poisoning and deaths have increased in Tehran. MMT clinics should be strictly run according to the national guideline to prevent methadone poisoning. With regard to high frequency of poly-drug use in methadone poisoning, it seems important to warn health care providers against prescription of other drugs with methadone. 

  6. Accidental Carbon Monoxide Poisonings in Adana, Turkey: A 14-year Study

    Directory of Open Access Journals (Sweden)

    Murat Darçın

    2017-03-01

    Full Text Available Aim: Carbon monoxide (CO is often referred to as the “silent killer” because its victims cannot see it, smell it or taste it. CO is responsible for a large percentage of the accidental poisonings and deaths reported throughout the world. CO poisoning therefore is considered a serious global health threat. The aim of the present study was to describe the cases of CO poisoning in a rural areas of Adana, Turkey between 2002 and 2015 based on data collected from incident reports. Methods: The cases of accidental CO poisoning were statistically analyzed. During that period, 74 incidents occurred and 154 people were poisoned by accidental CO poisoning. Results: The results of this analysis indicate that men and adults aged ≥65 years were more likely to die from CO poisoning than others. The number of CO poisoning cases was highest during the heating season. The majority (72% of poisoning resulting in hospitalization with a life-threatening condition or death occurred within the home. Conclusion: CO poisoning is a serious danger. People must be informed about this hazard. By educating risk groups about the dangers of CO poisoning, it is possible to save many lives as well as reduce the health risks.

  7. Hemodialysis in the Poisoned Patient

    Directory of Open Access Journals (Sweden)

    Megan Boysen-Osborn

    2017-09-01

    Full Text Available Audience: This classic team based learning (cTBL didactic is aimed for emergency medicine residents and fourth year medical students entering emergency medicine. Introduction: Over one million visits per year to United States (US emergency departments (ED are related to poisonings.1 Extracorporeal treatment (ECTR, specifically hemodialysis (HD, is one potential method to enhance elimination of certain drugs and their toxic metabolites.2-12 While HD may be life-saving in certain poisonings, it may have no effect on others and it carries associated risks and costs. It is essential that emergency physicians know the indications for HD in the poisoned patient. This cTBL reviews many poisonings which may be managed by HD. Objectives: By the end of this cTBL, the learner will: 1 recognize laboratory abnormalities related to toxic alcohol ingestion; 2 calculate an anion gap and osmolal gap; 3 know the characteristics of drugs that are good candidates for HD; 4 discuss the management of patients with toxic alcohol ingestions; 5 discuss the management of patients with salicylate overdose; 6 know the indications for HD in patients with overdoses of antiepileptic drugs; 7 discuss the management of patients with lithium toxicity. Method: This didactic session is a cTBL (classic team based learning.

  8. Food poisoning. Pt. 2

    Energy Technology Data Exchange (ETDEWEB)

    Askar, A.; Treptow, H.

    1982-01-15

    In the present study information about food poisoning is compared and reviewed. From the viewpoint of a food technologist the toxic substances are represented in four sections: 1. Residues of substances used by plants and animals: pesticides, antibiotics, sexual hormones and psychopharmaces. 2. Environmental contaminants: heavy metals, radionuclides and polycyclic hydrocarbons. 3. Substances developing during the manufacture: food additives, asbest, parts of packing materials, and residual solvents. 4. Substances arising from processing: smoked and roasted food, non enzymatic reaction, oxidized and heated fats and irradiated foods. The mere presence of toxic substances does not make food unsafe or poisonous. Dangerous, because of their toxic or carcinogenic effects are: Pesticides (especially chlorinated organic pesticides), heavy metals (especially lead, mercury and cadmium), polycyclic hydrocarbons (3,4-benzpyren), nitrosamines and vinyl chloride. The other components are only dangerous if they are present in large ammounts. A good and responsible practise of agriculture and food manufacture processes, a watchful and competent official food control and well informed consumers can limit the danger of food poisoning and human health.

  9. [Ciguatera poisoning in Spanish travellers].

    Science.gov (United States)

    Gascón, Joaquim; Macià, Maria; Oliveira, Inés; Corachán, Manuel

    2003-05-31

    Ciguatera poisoning appears after ingestion of contaminated fish from tropical coral reefs. Due to the diversity of clinical symptoms and the absence of a specific test in humans, the diagnosis is often difficult. A retrospective study of 10 patients consulting for a clinical and epidemiological picture compatible with ciguatera poisoning after a trip to tropical countries between 1993 and 2000. Most infections but one were acquired in the Caribbean area and there were 8 females. Clinical manifestations started within the first 24 hours after fish ingestion. Chief symptoms were diarrhea and nausea, followed by neurological symptoms, mainly limbs paresthesias that persisted for several weeks. The severity of clinical symptoms was variable and not related to age or initial symptoms. Ciguatera poisoning has to be considered in the diagnosis of acute gastroenteritis affecting travellers to tropical areas.

  10. Phonon-Mediated Quasiparticle Poisoning of Superconducting Microwave Resonators

    OpenAIRE

    Patel, U.; Pechenezhskiy, Ivan V.; Plourde, B. L. T.; Vavilov, M. G.; McDermott, R.

    2016-01-01

    Nonequilibrium quasiparticles represent a significant source of decoherence in superconducting quantum circuits. Here we investigate the mechanism of quasiparticle poisoning in devices subjected to local quasiparticle injection. We find that quasiparticle poisoning is dominated by the propagation of pair-breaking phonons across the chip. We characterize the energy dependence of the timescale for quasiparticle poisoning. Finally, we observe that incorporation of extensive normal metal quasipar...

  11. [A case of Veratrum poisoning].

    Science.gov (United States)

    Festa, M; Andreetto, B; Ballaris, M A; Panio, A; Piervittori, R

    1996-05-01

    A poisoning from a Veratrum album infusion mistaken for Gentiana lutea is described. Confusion between these two plants can easily occur because they are very similar, although flowers and disposition of leaves allow their botanic determinat: V. album leaves are alternate and flowers are white, while G. lutea leaves are opposite and flowers yellow. The poisoning involves gastrointestinal (pyrosis, vomiting) and cardiocirculatory systems (bradyarrhy-thmias, A-V dissociation, vasodilatation) Atropine is the drug of choice.

  12. Product Placement in Cartoons

    Directory of Open Access Journals (Sweden)

    Irena Oroz Štancl

    2014-06-01

    Full Text Available Product placement is a marketing approach for integrating products or services into selected media content. Studies have shown that the impact of advertising on children and youth are large, and that it can affect their preferences and attitudes. The aim of this article is to determine the existing level of product placement in cartoons that are broadcast on Croatian television stations. Content analysis of cartoons in a period of one month gave the following results: in 30% of cartoons product placement was found; most product placement were visual ads, in 89%, however, auditory product placement and plot connection was also found. Most ads were related to toys and it is significant that even 65% of cartoons are accompanied by a large amount of products available on the Croatian market. This is the result of two sales strategies: brand licensing (selling popular cartoon characters to toys, food or clothing companies and cartoon production based on existing line of toys with the sole aim of making their sales more effective.

  13. Neurotoxic Syndromes in Marine Poisonings a Review

    Directory of Open Access Journals (Sweden)

    Gholam Hossein Mohebbi

    2014-08-01

    Full Text Available Background: Marine neurotoxins as of Marine biotoxins are natural toxins that produced mainly by dinoflagellates, diatoms and several species of invertebrates and fish. Marine poisoning results from the ingestion of marine animals contain these toxins and causes considerable adverse effects. Materials and methods: This review provides some facts about the structures of marine neurotoxins, their molecular target and pharmacology, analytical methods for their detection and quantitation, diagnosis and laboratory testing, clinical manifestations, as well as prevention and treatment, if were obtainable. Furthermore, we focus on marine poisoning and various associated neurological syndromes like ciguatera, tetrodotoxin poisoning, and paralytic shellfish poisoning, after ingestion of the common marine toxins. Results: A number of neurotoxins that prescribed according to their potency (LD50 are: Maitotoxin, Ciguatoxins and Palytoxin, Tetrodotoxin and Saxitoxin, Brevetoxins, Azaspiracid, Yessotoxin, Cooliatoxin, Domoic acid and Conotoxins, Respectively. The primary target of most marine neurotoxins is voltage gated sodium channels and the resulting block of ion conductance through these channels. Moreover, these compounds interact with voltage-gated potassium and calcium channels and modulate the flux of stated ions into many cell types. As well, the target recognized for palytoxin is the Na+- K+ /ATPase. Conclusion: Results of reviewed studies revealed that, the Ciguatera is the commonest syndrome of marine poisoning, but is rarely lethal. Puffer fish poisoning results from the ingestion of fish containing tetrodotoxin and paralytic shellfish poisoning are less common, but have a higher fatality rate than ciguatera. Despite their high toxicity, no much research has been done on some of the toxins, like maitotoxin. In addition, there have remained unknown the pharmacological effects, mechanism of action and molecular target of some toxins such as

  14. Pattern of Acute Poisoning Attending a Tertiary Care Hospital of Western Nepal

    Directory of Open Access Journals (Sweden)

    Raju Prasad Shakya

    2016-12-01

    Full Text Available Introduction: Poisoning with various substances is a major public health problem and a reason for significant morbidity and mortality throughout the globe. It is one of the most common presentation in an emergency department. This study was conducted to determine the sociodemographic, poisoning types, and mode of poisoning in cases attending a tertiary hospital of Western Nepal. Methods: A retrospective observational study of two years was conducted from July 2014 to June 2016. Demography details, name of poisonous substance, and reasons for poisoning were reviewed and analyzed using descriptive statistics. Results: A total of 65 cases of poisoning were recorded. The occurrence was more common in female (n=44, 67.7% than in male (n=21, 32.3% with a F:M ratio of 2.1:1.  Poisoning  was most  common in the age group of 11-20 years (32.3%. Most of the cases were students (37% followed by farmers (26%. The most commonly abused poisoning substance were organophosphorous compounds, zinc-phosphate,  and  kerosene in adults, adolescents, and children respectively. Oral route was the most common (99% route of administration. Suicidal attempt, as a mode of poisoning, accounted for 70.8% of total poisoning cases. Conclusion: Female and young people are at greater risk of acute poisoning. Insecticide was the most common agent and self administer poisoning was the most common mode of poisoning. The occurrence of poisoning and its morbidity and mortality can be reduced by developing and implementation of effective prevention strategies like restricting easy poison sales, establishing drug and poison information centers,  and community awareness programs.

  15. The Poison Control Center--Its Role

    Science.gov (United States)

    Manoguerra, Anthony S.

    1976-01-01

    Poison Control Centers are being utilized by more schools of pharmacy each year as training sites for students. This paper discusses what such a center is, its services, changes anticipated in the poison center system in the next several years and how they may influence pharmacy education, specifically as it relates to clinical toxicology.…

  16. Blumea lacera Plant Poisoning in Cattle; Epidemiology and Management

    Directory of Open Access Journals (Sweden)

    Mst. Nusrat Zahan

    2015-07-01

    Full Text Available Plant poisoning in grazing animals is more common in Bangladesh, especially during the scarcity period. The present study was undertaken to find out the epidemiology of Blumea lacera fresh plant poisoning and its management in cattle. A total of 765 suspected clinical cases were examined, of these 48 were diagnosed as Blumea lacera plant poisoning. The poisoning was found more in local cattle (92% than that of crossbred (8% cattle. Most of the cases were found in autumn (71%, in compare to summer (23% and winter (6%. The highest occurrence of poisoning was observed in cattle of 6 months to 2 years of age (57% in comparison to other age category. Therapeutic response (16% was found if treatments were given within 4 hours of ingestion of the plant and the effective treatment was a combination of laxative, normal saline, vitamin B1. Veterinarian can apply this treatment during Blumea lacera poisoning in animals.

  17. [Forensic Analysis for 54 Cases of Suxamethonium Chloride Poisoning].

    Science.gov (United States)

    Zhao, Y F; Zhao, B Q; Ma, K J; Zhang, J; Chen, F Y

    2017-08-01

    To observe and analyze the performance of forensic science in the cases of suxa- methonium chloride poisoning, and to improve the identification of suxamethonium chloride poisoning. Fifty-four cases of suxamethonium chloride poisoning were collected. The rules of determination of suxamethonium chloride poisoning were observed by the retrospective analysis of pathological and toxicological changes as well as case features. The pathological features of suxamethonium chloride poisoning were similar to the general changes of sudden death, which mainly included acute pulmonary congestion and edema, and partly showed myocardial disarray and fracture. Suxamethonium chloride could be detected in the heart blood of all cases and in skin tissue of part cases. Suxa-methonium chloride poisoning has the characteristics with fast death and covert means, which are difficult to rescue and easily miss inspection. For the cases of sudden death or suspicious death, determination of suxamethonium chloride should be taken as a routine detection index to prevent missing inspection. Copyright© by the Editorial Department of Journal of Forensic Medicine

  18. Histamine (Scombroid) Fish Poisoning: a Comprehensive Review.

    Science.gov (United States)

    Feng, Charles; Teuber, Suzanne; Gershwin, M Eric

    2016-02-01

    Histamine fish poisoning, also known as scombroid poisoning, is the most common cause of ichythyotoxicosis worldwide and results from the ingestion of histamine-contaminated fish in the Scombroidae and Scomberesocidae families, including mackerel, bonito, albacore, and skipjack. This disease was first described in 1799 in Britain and re-emerged in the medical literature in the 1950s when outbreaks were reported in Japan. The symptoms associated with histamine fish poisoning are similar to that of an allergic reaction. In fact, such histamine-induced reactions are often misdiagnosed as IgE-mediated fish allergy. Indeed, histamine fish poisoning is still an underrecognized disease. In this review, we discuss the epidemiology, pathophysiology, evaluation, and treatment of scombroid disease. Because more than 80% of fish consumed in the USA is now imported from other countries, the disease is intimately linked with the global fish trade (National Marine Fisheries Service, 2012). Preventing future scombroid outbreaks will require that fishermen, public health officials, restaurant workers, and medical professionals work together to devise international safety standards and increase awareness of the disease. The implications of scombroid poisoning go far beyond that of fish and have broader implications for the important issues of food safety.

  19. Epidemiological analysis of poisoning cases in Van, Turkey

    International Nuclear Information System (INIS)

    Aydin, I.; Karadas, S.; Gonullu, H.; Dulger, A. C.

    2014-01-01

    Objective: To investigate the etiological and demographical characteristics of acute adult poisoning cases in eastern Turkey. Methods: The retrospective study was conducted at the Emergency Department of Yuzuncu Yil University, School of Medicine, and comprised data related to the period between 2007 and 2009. The data obtained included age, gender, referrals, manner of poisoning, manner of application, the department which followed up on the patients, duration of hospital stay. All data was noted on proforma. SPSS 15 was used for statistical analysis. Results: Of the total cases visiting the Emergency Department, 1207 (1.1%) related to poisoning. Of them, 880 (72.9%) had attempted suicide; 858 (71.1%) were female; 349 (29%) were male. The average age of the females was 25.4+-8.5 years, and that of the males 28.3+-14.3 years. Single-medicine was noted in poisoning 544 (45.1%) patients. Other poisoning types were multidrugs 373 (30.9%); rat poisoning, insecticide and pesticides, 145 (12%); corrosives 38 (3.1%); and weed, mushroomang; food 47 (3.8%). Oral poisoning was noted in 1141 (94.5%) cases. A total of 1019 (84.4%) patients received treatment and were followed up in the Emergency Department. Six (0.6%) patients died. Conclusion: There is a need to generate more awareness about the hazards of domestic cleaning products and to keep it away at some distinct place to minimised chances of confusion. (author)

  20. Poison pills and CEOs: The résumé matters

    Directory of Open Access Journals (Sweden)

    Douglas Sanford Jr.

    2012-07-01

    Full Text Available Previous research has linked poison pill to corporate governance characteristics such as ownership structure and board composition while overlooking the attributes of top managers involved in poison pill decision. Based on upper echelons perspective, we changed the focus by investigating the effect of CEO characteristics on poison pills, as measured by age, business education, and outside directorships. Using a sample of Fortune 500 manufacturing firms, we found that CEO business education is positively associated with poison pills, while CEOs’ outside directorships are negatively associated with poison pills. Furthermore, we found that CEO duality moderates the relationship between CEO business education and poison pills. We make implications for both corporate governance research and managerial practices regarding firms’ anti-takeover provisions.

  1. Amitraz, an underrecognized poison: A systematic review

    Directory of Open Access Journals (Sweden)

    Sahajal Dhooria

    2016-01-01

    Results: The original search yielded 239 articles, of which 52 articles described human cases. After following the inclusion and exclusion criteria, 32 studies describing 310 cases (151 females, 175 children of human poisoning with amitraz were included in this systematic review. The most commonly reported clinical features of amitraz poisoning were altered sensorium, miosis, hyperglycaemia, bradycardia, vomiting, respiratory failure, hypotension and hypothermia. Amitraz poisoning carried a good prognosis with only six reported deaths (case fatality rate, 1.9%. Nearly 20 and 11.9 per cent of the patients required mechanical ventilation and inotropic support, respectively. The role of decontamination methods, namely, gastric lavage and activated charcoal was unclear. Interpretation & conclusions: Our review shows that amitraz is an important agent for accidental or suicidal poisoning in both adults and children. It has a good prognosis with supportive management.

  2. Boat boarding ladder placement

    Science.gov (United States)

    1998-04-01

    Presented in three volumes; 'Boat Boarding Ladder Placement,' which explores safety considerations including potential for human contact with a rotating propeller; 'Boat Handhold Placement,' which explores essential principles and methods of fall con...

  3. Intentional and accidental paracetamol poisoning in childhood – a retrospective analysis

    Directory of Open Access Journals (Sweden)

    Katarzyna Kominek

    2015-04-01

    Full Text Available Paracetamol is one of the most commonly used analgesics and antipyretics available without limits as preparations of the OTC group (over the counter drugs. Overdose and poisoning with this drug always brings about the risk of acute hepatic failure. The objective of the study was a retrospective evaluation of patients hospitalized in the Paediatric Clinic during the period 2004–2012 due to poisoning with paracetamol.The analysis covered 44 patients hospitalized in the Paediatric Clinic during 2004–2012 due to poisoning with paracetamol. Patients were divided into three groups: intentional poisonings, accidental poisonings, and drug overdose.During the period of the study, 44 patients aged 2.1–17.1, poisoned with paracetamol, were hospitalized. Among these patients there were 30 (68.2% cases of intentional poisonings, 10 (22.7% of accidental poisonings, and only 4 patients (9.1% were children hospitalized after a paracetamol overdose. The majority of patients in all groups were females (93.3%.Paracetamol intoxication may occur after exceeding a single allowable dose, in the case of intentional poisoning, more rarely after exceeding the daily dose, in the case of intense pain complaints, or in the treatment of persistent fever.Based on the analysis performed, an increase was observed in the frequency of poisoning with paracetamol, especially intentional poisoning. Unlimited access to paracetamol as an OTC drug should be reconsidered.

  4. Intractable Seizures and Rehabilitation in Ciguatera Poisoning.

    Science.gov (United States)

    Derian, Armen; Khurana, Seema; Rothenberg, Joshua; Plumlee, Charles

    2017-05-01

    Ciguatera fish poisoning is the most frequently reported seafood toxin illness associated with the ingestion of contaminated tropical fish. Diagnosis relies on a history of recent tropical fish ingestion and subsequent development of gastrointestinal, cardiovascular, and neurological symptoms. Ciguatera poisoning usually has a self-limited time course, and its management involves symptomatic control and supportive care. This case report presents an uncommon case of ciguatera poisoning with prolonged intractable seizures refractory to standard antiseizure medications. The patient also had significant functional decline that responded to rigorous inpatient rehabilitation not previously described in literature.

  5. Paraphenylenediamine Poisoning in Tunisia: A Case Report

    Directory of Open Access Journals (Sweden)

    Dorra Amira

    2015-05-01

    Full Text Available Paraphenylenediamine (PPD represents the main active substance in the color of hair dyes. In Tunisia, PPD poisoning is very common, especially in rural areas where the consequences linked to this toxic substance are still unknown. In this paper, we report a case of PPD poisoning and confirm the diagnosis by a qualitative method of analysis. We discuss the clinical manifestations and study the kinetics of biological parameters during the monitoring of the poisoning. The main complication was renal failure and the treatment was basically symptomatic.

  6. [Poisonings with paracetamol, salicylates and dextromethorphan – problem evaluation based on data from Toxicological Laboratory and Poison Information Center in Krakow in 2010-2015].

    Science.gov (United States)

    Gomółka, Ewa; Hydzik, Piotr; Szkolnicka, Beata

    The aim of the paper was to study frequency of laboratory determinations and toxicological information related to over-the-counter drugs (OTC): paracetamol (acetaminophen), salicylates and dextromethorphan. The research was based on data from Toxicological Laboratory and Poison Information Center UJ CM in Krakow in years 2010-2015. Paracetamol was determined averagely 102 times a year, more than 50% (57 cases) were positive with confirmation of poisoning. The least number of paracetamol poisoning was noted in 2011 (35 cases), the most were in 2015 (98 cases). In the time span there were averagely 40 salicylates check measurements a year, less than 50% (15 cases) were positive. Dextromethorphane was confirmed averagely in 31 patients a year, decrease of the drug intoxications was noted in 2013-2015. Paracetamol and dextromethorphan were the most often the cause of poisoning in group of patients 13-18 years old, salicylates – more than 30 years. In the group of small children there were only a few poisonings with paracetamol. Toxicological information data related to paracetamol, salicylates and dextromethorphan were similar to data from toxicological laboratory. Mean year numbers of drug poisoning information were: 90 (paracetamol), 14 (salicylates), 30 (dextromethorphan). The differences were in patients age distribution. Acute poisonings with OTC were related mainly to paracetamol, young patients (13- 18 years) and young adults (19-29 years). Salicylates poisoning information were related mainly to the group of adult patients (> 30 years), dextromethorphan was abused mainly by oung patients (13-18 years). There were no observed poisonings with salicylates and dextromethorphan in children, but there were toxicological information about paracetamol and salicylates poisoning and overdose in group of children (1-6 years).

  7. Extracorporeal Treatment in Phenytoin Poisoning: Systematic Review and Recommendations from the EXTRIP (Extracorporeal Treatments in Poisoning) Workgroup.

    Science.gov (United States)

    Anseeuw, Kurt; Mowry, James B; Burdmann, Emmanuel A; Ghannoum, Marc; Hoffman, Robert S; Gosselin, Sophie; Lavergne, Valery; Nolin, Thomas D

    2016-02-01

    The Extracorporeal Treatments in Poisoning (EXTRIP) Workgroup conducted a systematic literature review using a standardized process to develop evidence-based recommendations on the use of extracorporeal treatment (ECTR) in patients with phenytoin poisoning. The authors reviewed all articles, extracted data, summarized findings, and proposed structured voting statements following a predetermined format. A 2-round modified Delphi method was used to reach a consensus on voting statements, and the RAND/UCLA Appropriateness Method was used to quantify disagreement. 51 articles met the inclusion criteria. Only case reports, case series, and pharmacokinetic studies were identified, yielding a very low quality of evidence. Clinical data from 31 patients and toxicokinetic grading from 46 patients were abstracted. The workgroup concluded that phenytoin is moderately dialyzable (level of evidence = C) despite its high protein binding and made the following recommendations. ECTR would be reasonable in select cases of severe phenytoin poisoning (neutral recommendation, 3D). ECTR is suggested if prolonged coma is present or expected (graded 2D) and it would be reasonable if prolonged incapacitating ataxia is present or expected (graded 3D). If ECTR is used, it should be discontinued when clinical improvement is apparent (graded 1D). The preferred ECTR modality in phenytoin poisoning is intermittent hemodialysis (graded 1D), but hemoperfusion is an acceptable alternative if hemodialysis is not available (graded 1D). In summary, phenytoin appears to be amenable to extracorporeal removal. However, because of the low incidence of irreversible tissue injury or death related to phenytoin poisoning and the relatively limited effect of ECTR on phenytoin removal, the workgroup proposed the use of ECTR only in very select patients with severe phenytoin poisoning. Copyright © 2016 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

  8. Hallmarks of opium poisoning in infants and toddlers.

    Science.gov (United States)

    Zamani, Nasim; Sanaei-Zadeh, Hossein; Mostafazadeh, Babak

    2010-10-01

    Accidental opium intoxication in children is an extremely dangerous poisoning if it remains undiagnosed and untreated. The classic triad of miosis, decreased level of consciousness and bradypnea, which are the hallmarks of opiate intoxication, are used for the diagnosis of opium poisoning in adults and children. Little attention has been paid to the signs of opium intoxication in children and no published study has explored the frequency of hallmarks of this type of poisoning in the paediatric population. We conducted a study in order to evaluate the prevalence of major signs of opium poisoning in infants and toddlers. In this study, a total of 228 infants and 82 toddlers who had been admitted to Loghman Hakim Hospital as a result of opium poisoning between 2001 and 2009 were evaluated, retrospectively. The most usual sign of opium poisoning was miosis (90%) followed by a decreased level of consciousness (88.4%), bradypnea (28.4%) and seizure (10.3%). The prevalence of the triad of miosis, bradypnea and a decreased level of consciousness was 25.2%. Miosis in association with decreased level of consciousness was detected in 82.6% of our patients. Bradypnea was present in 74 infants and 14 toddlers, which shows a statistically significant difference (P = 0.01). The mean age and weight of the patients with bradypnea were significantly less than those without bradypnea (P = 0.008 and P = 0.0001, respectively). Bradypnea and seizure were significantly more common in females (36.7% versus 26%; P = 0.05 and 15.2% versus 6.5%; P = 0.01, respectively). Miosis in association with a decreased level of consciousness is the most useful indicator of opium poisoning in infants and toddlers. Furthermore, seizure is a more common feature of this type of poisoning in infants, especially in those who are less than 1 month old.

  9. Beryllium poisonings; Les intoxications par le beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Alibert, S.

    1959-03-15

    This note reports a bibliographical study of beryllium toxicity. Thus, this bibliographical review addresses and outlines aspects and issues like aetiology, cases of acute poisoning (cutaneous manifestations, pulmonary manifestations), chronic poisoning (cutaneous, pulmonary and bone manifestations), excretion and localisation, and prognosis.

  10. Accidental childhood poisoning in Benin City: Still a problem ...

    African Journals Online (AJOL)

    Accidental poisoning (AP) is a leading cause of ill – health and deaths among. Nigerian children. Reports on AP are infrequent in Nigeria. This retrospective descriptive study examined the prevailing pattern of accidental childhood poisoning in Benin City. Accidental poisonings were identified in 226 (3.3%) of the cases ...

  11. Fatal poisonings in Oslo: a one-year observational study.

    Science.gov (United States)

    Bjornaas, Mari A; Teige, Brita; Hovda, Knut E; Ekeberg, Oivind; Heyerdahl, Fridtjof; Jacobsen, Dag

    2010-06-06

    Acute poisonings are common and are treated at different levels of the health care system. Since most fatal poisonings occur outside hospital, these must be included when studying characteristics of such deaths. The pattern of toxic agents differs between fatal and non-fatal poisonings. By including all poisoning episodes, cause-fatality rates can be calculated. Fatal and non-fatal acute poisonings in subjects aged > or =16 years in Oslo (428 198 inhabitants) were included consecutively in an observational multi-centre study including the ambulance services, the Oslo Emergency Ward (outpatient clinic), and hospitals, as well as medico-legal autopsies from 1st April 2003 to 31st March 2004. Characteristics of fatal poisonings were examined, and a comparison of toxic agents was made between fatal and non-fatal acute poisoning. In Oslo, during the one-year period studied, 103 subjects aged > or =16 years died of acute poisoning. The annual mortality rate was 24 per 100 000. The male-female ratio was 2:1, and the mean age was 44 years (range 19-86 years). In 92 cases (89%), death occurred outside hospital. The main toxic agents were opiates or opioids (65% of cases), followed by ethanol (9%), tricyclic anti-depressants (TCAs) (4%), benzodiazepines (4%), and zopiclone (4%). Seventy-one (69%) were evaluated as accidental deaths and 32 (31%) as suicides. In 70% of all cases, and in 34% of suicides, the deceased was classified as drug or alcohol dependent. When compared with the 2981 non-fatal acute poisonings registered during the study period, the case fatality rate was 3% (95% C.I., 0.03-0.04). Methanol, TCAs, and antihistamines had the highest case fatality rates; 33% (95% C.I., 0.008-0.91), 14% (95% C.I., 0.04-0.33), and 10% (95% C.I., 0.02-0.27), respectively. Three per cent of all acute poisonings were fatal, and nine out of ten deaths by acute poisonings occurred outside hospital. Two-thirds were evaluated as accidental deaths. Although case fatality rates were

  12. EPIDEMIOLOGY OF CARBON MONOXIDE POISONING IN LJUBLJANA FROM 1990 TO 1999

    Directory of Open Access Journals (Sweden)

    Miran Brvar

    2002-02-01

    Full Text Available Background. Carbon monoxide (CO is the most common lethal poisoning. The incidence of sublethal CO poisoning in Slovenia is not known. The aim of the study was to investigate the epidemiology of sublethal acute CO poisoning in Ljubljana region (Slovenia.Methods. A retrospective study involved CO poisoned patients admited to Poison Control Centre and Centre of Intensive Care Medicine of the University Medical Centre Ljubljana, between January 1, 1990 and December 31, 1999.Results. There were annualy approximately 2.4 cases of sublethal CO poisonings per 100.000 population in Ljubljana region. Of these, 25% were suicide attempts and 75% were unintentional poisonings (28% happened in domestic environment as a result of heating, cooking or bathing, 22% were associated with fire, 11% happened in the working site, 10% happened in the workroom at home and only 3% occurred in the moving vehicle. Among the patients there were 72% male and 28% female. The domestic source of CO was a gas water heater or residential heating device in the 63% of the cases, a coal stove in the 32% and an oil heater in the 6%. In the 18% of the suicide attempts we found also acute drug or alcohol intoxication, and 18% of patients poisoned in the fire were intoxicated with alcohol. Collective poisoning happened in the 25% of cases affecting from 2 to 6 persons.Conclusions. The incidence of sublethal CO poisoning in Ljubljana region appers to be seven times lower than in other countries. The main reason is misdiagnosing of CO poisoning. In the future we should consider CO poisoning more often, particularly in all patients with flu-like symptoms, unexplained headache and worsening of pre-existing diseases. We should always exclude the collective poisoning and the presence of alcohol or other drugs.

  13. Jerusalem cherry poisoning

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/002871.htm Jerusalem cherry poisoning To use the sharing features on this page, please enable JavaScript. The Jerusalem cherry is a plant that belongs to the ...

  14. A Danish Survey of Antihistamine Use and Poisoning Patterns

    DEFF Research Database (Denmark)

    Jensen, Louise; Rømsing, Janne; Dalhoff, Kim

    2017-01-01

    with equally distributed coingestants. Hospitalization was recommended in 78% of DPIC exposures. Admissions required only 1-day of treatment in 91% of the SSI exposures. One of the 14 identified deaths in the SSI study population was directly related to antihistamine poisoning. Results support the limited...... of the antihistamine use and poisoning pattern from 2007 to 2013 in Denmark based on two independent databases. There were 1049 antihistamine exposures in the national, advisory telephone service specialized in poisonings, the Danish Poison and Information Centre (DPIC), and 456 exposures in the three registers used...

  15. Pathogenesis of Granozan (ethylmercury chloride) poisoning in pigs

    Energy Technology Data Exchange (ETDEWEB)

    Ardatova, A N; Yakusheva, O V

    1971-01-01

    This paper deals with the pathology of mercury poisoning in pigs aged 3-4 months, given daily 2 g Granozan (40 mg ethylmercury chloride) in compounded feed for up to 19 days, and also in pigs of various ages that developed mercury poisoning after consuming grain treated with Granozan. The pigs were killed and examined before the appearance of symptoms and also after acute and chronic mercury poisoning. The onset of mercury poisoning was characterized by anorexia, loss of weight, diarrhea, weakness and paralysis. The organs and tissues of animals killed 1-2 days before the appearance of symptoms (usually on day 14), or dying from mercury poisoning, contained the following amounts of accumulated Hg (mg per 100 g): kidneys 10.35, liver 4.3, muscles 1.36, spleen 1.38, pancreas 0.43, medulla oblongata 0.65, cerebellum 0.79, heart 0.75, mesenteric lymph nodes 0.71, submandibular salivary glands 0.59, stomach wall 0.69, and cecal wall 0.76. In subclinical cases the symptoms and lesions were absent, but the mercury content of organs and tissue was similar to that in animals dying from poisoning, i.e. (mg per 100g): kidneys 10.35, liver 4.3, muscles 1.36, and brain 0.8.

  16. Product placement and its aplication in foreign film

    OpenAIRE

    Vaněk, Tomáš

    2010-01-01

    Marketing and commertial communication and position of product placement within it, legislature governing product placement and its aplication, history of product placement, forms of product placement, use of product placement within marketing campaign, aplication of product placement in movie Casino Royale.

  17. Mushroom poisoning in Ireland: the collaboration between the National Poisons Information Centre and expert mycologists.

    LENUS (Irish Health Repository)

    Cassidy, Nicola

    2012-02-01

    BACKGROUND: Occasionally, mycologist assistance is requested to reliably identify mushroom species in symptomatic cases where there is a concern that a toxic species is involved. The aim of this study was to describe the epidemiology of mushroom poisoning in Ireland, to describe the working arrangement between the National Poisons Information Centre (NPIC) and professional mycologists and to present a case series detailing the circumstances when mycologists were consulted. METHODS: Computerised records from 1 January 2004 to 31 December 2009 were retrospectively reviewed and data on patient demographics, circumstances, and mushroom species collated. In 1999, the NPIC established a national registry of volunteer professional mycologists who are available 24 h\\/day for mushroom identification. The NPIC staff liaises directly with the mycologist and arranges transport of mushroom material. Digital photographic images are requested if there is likely to be a delay in arranging transportation of mushroom material, and the images are subsequently emailed to a mycologist. Five cases of suspected mushroom poisoning were chosen to demonstrate the inter-professional collaboration between the NPIC and mycologists. RESULTS: From 2004 to 2009, the NPIC was consulted about 70 cases of suspected mushroom exposures. Forty-five children ingested unknown mushrooms, 12 adults and 2 children ingested hallucinogenic mushrooms and 11 adults ingested wild toxic mushrooms that were incorrectly identified or confused with edible species. The mycologists were consulted 10 times since 1999. In this series, Amanita species were identified in two cases. In three cases, the species identified were Clitocybe nebularis, Coprinus comatus and Panaeolina foenisecii, respectively, and serious poisoning was excluded. Incorrect mushroom identification by a health care professional using the Internet occurred in two cases. The mycologists assisted Poisons Information Centres in Northern Ireland and the

  18. Mushroom poisoning in Ireland: The collaboration between the National Poisons Information Centre and expert mycologists.

    LENUS (Irish Health Repository)

    Cassidy, Nicola

    2011-03-01

    Background. Occasionally, mycologist assistance is requested to reliably identify mushroom species in symptomatic cases where there is a concern that a toxic species is involved. The aim of this study was to describe the epidemiology of mushroom poisoning in Ireland, to describe the working arrangement between the National Poisons Information Centre (NPIC) and professional mycologists and to present a case series detailing the circumstances when mycologists were consulted. Methods. Computerised records from 1 January 2004 to 31 December 2009 were retrospectively reviewed and data on patient demographics, circumstances, and mushroom species collated. In 1999, the NPIC established a national registry of volunteer professional mycologists who are available 24 h\\/day for mushroom identification. The NPIC staff liaises directly with the mycologist and arranges transport of mushroom material. Digital photographic images are requested if there is likely to be a delay in arranging transportation of mushroom material, and the images are subsequently emailed to a mycologist. Five cases of suspected mushroom poisoning were chosen to demonstrate the inter-professional collaboration between the NPIC and mycologists. Results. From 2004 to 2009, the NPIC was consulted about 70 cases of suspected mushroom exposures. Forty-five children ingested unknown mushrooms, 12 adults and 2 children ingested hallucinogenic mushrooms and 11 adults ingested wild toxic mushrooms that were incorrectly identified or confused with edible species. The mycologists were consulted 10 times since 1999. In this series, Amanita species were identified in two cases. In three cases, the species identified were Clitocybe nebularis, Coprinus comatus and Panaeolina foenisecii, respectively, and serious poisoning was excluded. Incorrect mushroom identification by a health care professional using the Internet occurred in two cases. The mycologists assisted Poisons Information Centres in Northern Ireland

  19. Storage, handling and movement of fuel and related components at nuclear power plants

    International Nuclear Information System (INIS)

    1979-01-01

    The report describes in general terms the various operations involved in the handling of fresh fuel, irradiated fuel, and core components such as control rods, neutron sources, burnable poisons and removable instruments. It outlines the principal safety problems in these operations and provides the broad safety criteria which must be observed in the design, operation and maintenance of equipment and facilities for handling, transferring, and storing nuclear fuel and core components at nuclear power reactor sites

  20. Effect of fuel burnup on the mechanical safety coefficients

    International Nuclear Information System (INIS)

    Plyashkevich, V.Ju.; Sidorenko, V.D.; Shishkov, L.K.

    2001-01-01

    )In the paper the results of studies of changes in the process of campaign 'disturbances' of local heat flux and local fuel burnup, resulting from the 'mechanical' deviations in the composition and geometrical characteristics of fuel rods from the nominal are given. As example, the WWER-440 fuel assembly with burnable poisons used in the five-year fuel cycle is considered. The effect of deviations in fuel enrichment, fuel content, gadolinium content and geometrical size was studied (Authors)

  1. Asphalt cement poisoning

    Science.gov (United States)

    ... petroleum material that hardens when it cools. Asphalt cement poisoning occurs when someone swallows asphalt. If hot ... found in: Road paving materials Roofing materials Tile cements Asphalt may also be used for other purposes.

  2. Sodium hydroxide poisoning

    Science.gov (United States)

    Sodium hydroxide is a very strong chemical. It is also known as lye and caustic soda. This ... poisoning from touching, breathing in (inhaling), or swallowing sodium hydroxide. This article is for information only. Do ...

  3. Poison Ivy Dermatitis

    Science.gov (United States)

    ... Category: Share: Yes No, Keep Private Poison Ivy Dermatitis Share | "Leaves of three - let it be!" aptly ... is caused by an allergic reaction ( allergic contact dermatitis ) to the oily coating that covers of these ...

  4. Carbon Monoxide Poisoning

    Science.gov (United States)

    ... found in fumes produced any time you burn fuel in cars or trucks, small engines, stoves, lanterns, ... prevent CO poisoning in my home? Install a battery-operated or battery back-up CO detector in ...

  5. Poison Ivy Dermatitis

    Science.gov (United States)

    ... than the other two. Poison ivy clings to tree trunks and other vertical surfaces with hair-like ... urushiol". These are called Rhus plants after the old scientific name (it was changed to toxidendron). A ...

  6. Sodium hypochlorite poisoning

    Science.gov (United States)

    ... that can cause choking and serious breathing problems. Symptoms of sodium hypochlorite poisoning may include: Burning, red eyes Chest pain Coma Coughing (from the fumes) Delirium Gagging sensation Low blood pressure Pain in the ...

  7. Extending reactor time-to-poison and reducing poison shutdown time by pre-shutdown power alterations

    Energy Technology Data Exchange (ETDEWEB)

    Kerr, Edward

    1963-10-15

    Manipulation of reactor power prior to shutdown and increasing the time- to-poison a sufficient amount to enable the required maintenance work to be completed and the reactor immediately restarted are discussed. The method employed in the NRU Reactor to gain the maximum timeto-poison with the least production loss is outlined. The method is based on intuition and is described by means of an analog of the iodine--xenon equations rather than the equations themselves. (C.E.S.)

  8. 22 CFR 96.50 - Placement and post-placement monitoring until final adoption in incoming cases.

    Science.gov (United States)

    2010-04-01

    ... qualified escorts, if used, and, if possible, in the company of the prospective adoptive parent(s). (b) In... greater. (c) When a placement for adoption is in crisis in the post-placement phase, the agency or person... resolving the crisis and the placement is disrupted, the agency or person assuming custody of the child...

  9. A format for phylogenetic placements.

    Directory of Open Access Journals (Sweden)

    Frederick A Matsen

    Full Text Available We have developed a unified format for phylogenetic placements, that is, mappings of environmental sequence data (e.g., short reads into a phylogenetic tree. We are motivated to do so by the growing number of tools for computing and post-processing phylogenetic placements, and the lack of an established standard for storing them. The format is lightweight, versatile, extensible, and is based on the JSON format, which can be parsed by most modern programming languages. Our format is already implemented in several tools for computing and post-processing parsimony- and likelihood-based phylogenetic placements and has worked well in practice. We believe that establishing a standard format for analyzing read placements at this early stage will lead to a more efficient development of powerful and portable post-analysis tools for the growing applications of phylogenetic placement.

  10. A retrospective analysis of acute organophosphorus poisoning ...

    African Journals Online (AJOL)

    organophosphorus (OP) poisoning cases in a tertiary care hospital. Materials and ... In a pre-structured proforma, data regarding age, sex, time elapsed after intake, circumstances of poisoning, duration of hospitalization ... responsible for majority of self-attempted deaths ... cleansed with water at the time of admission.

  11. ANALYSIS OF ORGANOPHOSPHORUS POISONING, AT TERTIARY CARE HOSPITAL: A REPORT

    Directory of Open Access Journals (Sweden)

    Shakuntala

    2015-01-01

    Full Text Available BACKGROUND: Organophosphorus (OP compounds are the most common suicidal poison in developing countries and mortality continues to be high. The present study was aimed to know the pattern and outcome of the OP poisoning. METHODOLOGY: A record based retrospective study from January 2013 - December 2013 was Conducted in a tertiary care hospital and data regarding age, gender, domicile, type of poison, manner of poisoning, seasonal trends, marital status, motive behind poisoning , socio - economic status and outcome was collected in a pre - structured Performa. All data were documented, analyzed and interpreted as per the laid down protocol. RESULTS : out of total 1575 cases of OP compound poisoning, 71.73% (1130 were male, 28.27% (445 were female, 34.6% were in the age group 21 - 30 years, 70.95% were of low socio - economic status, Occupation wise agricultural workers were on top of the list (70.07%, The commonest (93.78% motive behind poisoning was suicidal in both males and females, Financial problem was one of the commonest (51.22% reasons of poisoning. The mortality rate in our study was 13.47%. CONCLUSION : Y oung and adult males of Low socio - economic class, rural, both literate and illiterate agriculturists commonly abuse this substance to commit suicide

  12. AN ANALYTICAL STUDY OF DEATHS DUE TO POISONING IN VISAKHAPATNAM

    Directory of Open Access Journals (Sweden)

    V. Chandrasekhar

    2017-11-01

    Full Text Available BACKGROUND The aim of this study was to determine and classify the various types of poisoning deaths as seen at Andhra Medical College Mortuary, Visakhapatnam city. MATERIALS AND METHODS This is a retrospective study of all the deaths due to poisoning seen in the Department of Forensic Medicine & Toxicology, Andhra Medical College, Visakhapatnam City over a 15 year period (January 2001‐December 2015 as recorded in the autopsy registers and postmortem reports of the department. RESULTS Poisoning is one of the commonest methods of committing suicide especially in developing countries like India. A total of 22475 autopsies were done during the period. Two thousand seventy four cases representing 9.23% of all bodies received by the mortuary were deaths due to poisoning. Organophosphate compounds were the most commonly 78.98% abused substance. The common motive of poisoning was suicidal 93.43%with male to female ratio 6.69:1.Peak incidence was observed in the age group 21-40 years. Type of poison consumed, socioeconomic status and place of household are also ascertained. CONCLUSION This study shows the pattern of poisoning deaths in Visakhapatnam and this preliminary data will provide a baseline for future research and help in formulating policies to prevent deaths due to poisoning.

  13. The pattern of acute poisoning in a teaching hospital, north-west Ethiopia.

    Science.gov (United States)

    Abula, Teferra; Wondmikun, Yared

    2006-04-01

    Poisoning by means of hazardous chemicals through ignorance, mishap or intentionally is becoming a serious health problem worldwide. Epidemiological data on this important health issue are, however, scarce in Ethiopia. The purpose of this study is to assess the pattern of acute poisonings and determine the approaches employed for the management of poisoning. The medical records of patients with acute poisonings presented to the Gondar University hospital between July 2001 and June 2004 were reviewed retrospectively. One hundred and two patients presenting to the emergency department of the hospital were due to acute poisoning; accounting for about 0.45% of emergency room admissions. Organophosphates, rat poison and alcohol were the commonly encountered poisoning agents (in about 70% of cases) mainly in adults possibly with suicidal or para-suicidal intention. The approaches employed in the management of poisoning mainly involved gastrointestinal decontamination procedures. Specific antidotes were used in a substantial number of patients. The fatality rate was 2.4%. Poisoning with suicidal intention is becoming a serious health problem particularly in adults. Pesticides are commonly used toxicants. The approaches in the management of poisoning are justifiable in some cases. However, much is to be done to improve the recording of patient-related information and record-keeping processes. Further large scale studies are required to investigate national trends of poisoning and factors associated with poisoning.

  14. AN OBSERVATIONAL CLINICAL STUDY OF ASSESSING THE UTILITY OF PSS (POISON SEVERITY SCORE AND GCS (GLASGOW COMA SCALE SCORING SYSTEMS IN PREDICTING SEVERITY AND CLINICAL OUTCOMES IN OP POISONING

    Directory of Open Access Journals (Sweden)

    S. Chandrasekhar

    2017-05-01

    Full Text Available BACKGROUND Organophosphorus compound poisoning is the most common poisonings in India because of easy availability often requiring ICU care and ventilator support. Clinical research has indicated that respiratory failure is the most important cause of death due to organophosphorus poisoning. It results in respiratory muscle weakness, pulmonary oedema, respiratory depression, increased secretions and bronchospasm. These complications and death can be prevented with timely institution of ventilator support. MATERIALS AND METHODS Hundred consecutive patients admitted with a history of organophosphorus poisoning at Kurnool Medical College, Kurnool, were taken for study after considering the inclusion and exclusion criteria. Detailed history, confirmation of poisoning, examination and other than routine investigations, serum pseudocholinesterase and arterial blood gas analysis was done. The severity and clinical outcomes in OP poisoning is graded by PSS (poison severity score and GCS (Glasgow coma scale scoring systems. RESULTS This study was conducted in 100 patients with male preponderance. Majority of poisoning occurred in 21-30 age group (n=5. Most common compound consumed in our study was methyl parathion and least common was phosphoran. Slightly more than half of the patients consumed less than 50 mL of poison. 21 patients consumed between 50 to 100 mL. Distribution of poison severity score of patients studied showed 45 cases of grade 1 poisoning. 26 cases of grade 2 poisoning, 23 cases of grade 3 poisoning and 6 cases of grade 4 poisoning (death within first 24 hours. Distribution of GCS score of patients studied GCS scores were <10 in 25 patients at admission and 24 patients after 24 hours. GCS scores were ≥10 in 75 patients at admission and 76 patients after 24 hours. Poison severity score is not prognostic, but merely defines severity of OP poisoning at a given time. CONCLUSION Both Glasgow coma scale and poison severity scoring systems

  15. NCHS - Drug Poisoning Mortality by County: United States

    Data.gov (United States)

    U.S. Department of Health & Human Services — This dataset describes drug poisoning deaths at the county level by selected demographic characteristics and includes age-adjusted death rates for drug poisoning...

  16. Sodium carbonate poisoning

    Science.gov (United States)

    Sodium carbonate (known as washing soda or soda ash) is a chemical found in many household and industrial products. This article focuses on poisoning due to sodium carbonate. This article is for information only. Do NOT ...

  17. Lip moisturizer poisoning

    Science.gov (United States)

    ... Science of Poisons . 8th ed. New York, NY: McGraw-Hill Education/Medical; 2013:chap 6. Review Date ... urac.org). URAC's accreditation program is an independent audit to verify that A.D.A.M. follows ...

  18. Nail polish poisoning

    Science.gov (United States)

    ... Science of Poisons . 8th ed. New York, NY: McGraw-Hill Medical; 2013:chap 24. Kulig K. General ... urac.org). URAC's accreditation program is an independent audit to verify that A.D.A.M. follows ...

  19. Poisons Implicated in Homicidal, Suicidal and Accidental Cases in North-West Pakistan

    International Nuclear Information System (INIS)

    Jan, A.; Khan, M. T. H.; Khan, M. J.; Fatima, S.; Khan, T. M.

    2016-01-01

    Background: Pakistan has one of the highest prevalence of poisoning in the world. However, limited data exist on the frequency of poisons implicated in homicidal, suicidal, and accidental cases in North-West Pakistan (Khyber Pakhtunkhwa). Methods: This retrospective study of 353 cases and biological specimens of poisoning received at the department of Forensic medicine and toxicology, Khyber Medical College Peshawar from 13 districts of Khyber Pakhtunkhwa. Frequency of poisoning was assessed by testing each specimen for 17 different poisons. Results: Of all the specimens, 250 (70.8 percent) specimens tested positive and the rest did not show any indication of poisoning (n=103, 29.2 percent). The most frequent poisons detected were benzodiazepines (total n=75), organophosphates (total n=58), phencyclidine (total n=30) and morphine (total n=23). Gender had a significant association with benzodiazepines (p=0.011), tricyclic antidepressants (p=0.001), and organophosphates (p<0.001). Organophosphates were the most common cause of poisoning in females while benzodiazepines were the most common cause of poisoning in males. Conclusion: Poisoning by benzodiazepines, organophosphates and phencyclidine are the most common causes of intoxication in population of Khyber Pakhtunkhwa. Source of poisoning varies with gender for organophosphates, benzodiazepines and tricyclic antidepressants. (author)

  20. Lead poisoning in a Mississippi sandhill crane

    Science.gov (United States)

    Franson, J. Christian; Hereford, Scott G.

    1994-01-01

    Lead poisoning from the ingestion of spent lead shot is well documented in waterfowl (Sanderson and Bellrose 1986) and has been reported in other wetland (Locke et al. 1991, Windingstad et al. 1984) and upland (Hunter and Rosen 1965, Locke and Bagley 1967) avian species. Ingested fishing weights have been implicated in lead poisoning of Trumpeter Swans (Cygnus buccinator) (Blus et al. 1989), Common Loons (Gavia immer) (Locke et al. 1982, Franson and Cliplef 1992, Pokras and Chafe1 1992), Mute Swans (Cygnus olor) (Birkhead 1982), and Sandhill Cranes (Grus canadensis) (Windingstad et al. 1984). The significance of lead poisoning as a mortality factor in avian species other than waterfowl is probably underestimated (Locke and Friend 1992), and any cause of mortality becomes particularly important in species with small population sizes. We report here the first known case of lead poisoning in a Mississippi Sandhill Crane (Grus canadensis pulla), a critically endangered subspecies.

  1. Status and trends in poisonings in Denmark 2007-2009

    DEFF Research Database (Denmark)

    Dalhoff, Kim Peder; Bøgevig, Søren; Høgberg, Lotte Christine Groth

    2011-01-01

    INTRODUCTION: The Danish Poison Information Centre (DPIC) provides information to the public and health care professionals on acute poisonings. The DPIC received 41,000 enquiries during the first three years of its existence as an open 24h telephone service. The aim of this data register study...... was to classify all substance exposures, to gain knowledge of the status and trends in poisonings (toxico-surveillance) and to evaluate the development in the number of contacts. MATERIAL AND METHODS: Information and inquiries were continuously entered into a poison-centre database. A new classification system...... in the Danish population were registered in 2009. For all groups, except drugs of abuse, the data showed an increase in the actual number of exposures from 2008 to 2009. Pharmaceuticals represent one third of substance exposures, and analgesics constitute a third of these poisonings. A relative increase...

  2. Acute poisoning in the community and its associated mortality at the ...

    African Journals Online (AJOL)

    Background: Acute poisoning is a common event in the community. Despite the high prevalence of acute poisoning in the community, there are very few studies done on the subject in Zambia. Lack of research on acute poisoning has resulted in lack of information on the pattern of poisoning, morbidity, mortality and pitfalls in ...

  3. [Analysis of acute pesticide poisoning in Ningbo city from 2011 to 2016].

    Science.gov (United States)

    Li, X H; Leng, P B; Mao, G C; Wang, A H

    2018-01-20

    Objective: To analyze the characteristics of acute pesticide poisoning in Ningbo, and to provide scientific basis for the prevention and control strategy. Methods: In February 2017, the pesticide poisoning report card of Ningbo from 2011 to 2016 was drawn from the China Disease Control and prevention information system. The data of the report card was organized by Excel and analyzed by SPSS19.0 software. Results: 2593 cases of acute pesticide poisoning were reported in Ningbo from 2011 to 2016, 125 deaths, and the case fatality rate was 4.82%. The productive pesticide poisoning and unproductive pesticide poisoning were 299 and 2294, respectively, the ratio was 1: 7.67. The case fatality rate were 0.33% and 5.41%, respectively. The difference was statistically significant (χ(2)=14.83, PPesticide poisoning mainly occurred from July to September (55.85%) , the unproductive pesticides mainly occurred from April to June (30.64%) and July to September (30.34%). The seasonal distribution of the pesticide poisoning in the two groups was statistically significant (χ2=82.21, Ppesticide poisoning in male (80.27%) was significantly higher than the proportion of unproductive pesticide poisoning (52.09%) , the differences in gender composition between the two types of pesticide poisoning was significant (χ2=84.97, Ppesticide poisoning from 55 to 65 years old group was in the largest number (35.45%) , and the distribution of unproductive pesticide poisoning was uniform in each age group including 25 years old and above, the difference in age composition between two types of pesticide poisoning was statistically significant (χ2=177.84, Ppesticide poisoning. The counties with more reports were Ninghai county (18.28%) , Fenghua district (14.69%) and Yuyao (12.42%). The acute pesticide poisoning was mainly caused by pesticides and herbicides, mainly in organophosphorus (45.74%) and paraquat (16.81%) . Conclusions: At present, the pesticide poisoning in Ningbo is given priority to

  4. ESL Placement and Schools

    Science.gov (United States)

    Callahan, Rebecca; Wilkinson, Lindsey; Muller, Chandra; Frisco, Michelle

    2010-01-01

    In this study, the authors explore English as a Second Language (ESL) placement as a measure of how schools label and process immigrant students. Using propensity score matching and data from the Adolescent Health and Academic Achievement Study and the National Longitudinal Study of Adolescent Health, the authors estimate the effect of ESL placement on immigrant achievement. In schools with more immigrant students, the authors find that ESL placement results in higher levels of academic performance; in schools with few immigrant students, the effect reverses. This is not to suggest a one-size-fits-all policy; many immigrant students, regardless of school composition, generational status, or ESL placement, struggle to achieve at levels sufficient for acceptance to a 4-year university. This study offers several factors to be taken into consideration as schools develop policies and practices to provide immigrant students opportunities to learn. PMID:20617111

  5. Pharmacological treatment of cardiac glycoside poisoning

    OpenAIRE

    Roberts, Darren M.; Gallapatthy, Gamini; Dunuwille, Asunga; Chan, Betty S.

    2015-01-01

    Cardiac glycosides are an important cause of poisoning, reflecting their widespread clinical usage and presence in natural sources. Poisoning can manifest as varying degrees of toxicity. Predominant clinical features include gastrointestinal signs, bradycardia and heart block. Death occurs from ventricular fibrillation or tachycardia. A wide range of treatments have been used, the more common including activated charcoal, atropine, ??adrenoceptor agonists, temporary pacing, anti?digoxin Fab a...

  6. Accidental poisoning with detomidine and butorphanol.

    Science.gov (United States)

    Hannah, N

    2010-09-01

    This is a case report concerning a veterinarian who spilled detomidine and butorphanol on dermatitic hands while sedating a horse. This resulted in acute poisoning from which the patient spontaneously recovered with supportive management. Veterinarians often suffer from occupational dermatitis and handle strong sedatives with no gloves while working around unpredictable animals. Thus, this group is at risk of accidental self-poisoning from this method.

  7. Rabbitfish ("aras"): an unusual source of ciguatera poisoning.

    Science.gov (United States)

    Raikhlin-Eisenkraft, Bianca; Bentur, Yedidia

    2002-01-01

    Ciguatera poisoning is the commonest fish-borne seafood intoxication. It is endemic to warm water tropical areas and is caused by consumption of bottom-dwelling shore reef fish, mostly during spring and summer. The causative agent, ciguatoxin, is a heat-stable ester complex that becomes concentrated in fish feeding on toxic dinoflagellates. The common clinical manifestations are a combination of gastrointestinal and neurologic symptoms. Severe poisoning may be associated with seizures and respiratory paralysis. To describe a series of patients who sustained ciguatera poisoning in an uncommon region and from an unexpected source. Two families complained of a sensation of "electrical currents," tremors, muscle cramps, nightmares, hallucinations, agitation, anxiety and nausea of varying severity several hours after consuming rabbitfish ("aras"). These symptoms lasted between 12 and 30 hours and resolved completely. The temporal relationship to a summer fish meal, the typical clinical manifestations along with the known feeding pattern of the rabbitfish suggested ciguatera poisoning. The Eastern Mediterranean basin is an unusual region and the rabbitfish an unusual source for ciguatera poisoning. There are no readily available and reliable means for detecting ciguatoxin in humans. A high index of suspicion is needed for diagnosis and a thorough differential diagnosis is essential to eliminate other poisonings, decompression sickness and encephalitis. Supportive therapy is the mainstay of treatment.

  8. Prevalence of Organophosphate Poisoning In Batticaloa, Sri Lanka

    Directory of Open Access Journals (Sweden)

    maheswaran umakanth

    2017-12-01

    Full Text Available Background: Deliberate self-harm (DSH is a global problem which has steadily increased over the past few years in developing countries and has become as one of the major causes of morbidity and mortality in these countries. The aim of this prospective study was to analyze the prevalence of organophosphate poisoning among other acute DSH cases admitted to the medical ward at Batticaloa Teaching Hospital, Sri Lanka. We report the socio-demographic, and outcome of organophosphate poisoning. Method: The prospective study comprises of 121 cases of acute poisoning admitted at Batticaloa Teaching Hospital (BTH, Sri Lanka. This study was conducted for a period of three months from April 12 through July 12, 2017. Results: Among the subjects, 119 (98.34% cases had intentional poisoning and only two cases (1.65% accidental poisoning. Poisoning with organophosphate compounds (OP 23 (19% was the second leading type. There were 13 (56.5% males and 10 (43.5% females. Most of the patients were under the age group of 20-29 years old. 21 cases lived in rural areas and 2 in urban areas. Out of 23 patients, there were 2 (8.7% deaths, 18 (78.3% were discharged without any complications. Conclusion: DSH in Sri Lanka is reported to be associated with interpersonal conflict, short premeditation, as well as alcohol misuse among males.

  9. A Tale of two Systems: Poisoning Management in Iran and the United States

    Directory of Open Access Journals (Sweden)

    Omid Mehrpour

    2013-05-01

    Full Text Available Poisoning morbidity and mortality is high in the developing world. Systems for care of poisoned patients differ markedly between countries. In this paper a comparison of two very different systems for the care of poisoned patients, is presented. Specifically, the role of poison centers and poison treatment centers in the US and Iran are contrasted. A systematic literature search was undertaken utilizing the PubMed, Scopus, and Google Scholar and the keywords “poison centers”, “treatment” “Iran” “United States of America” and 100 publications were identified. From these, relevant data were found in 23 publications. The information was double-checked and data were summarized herein.We find that the system of the care of poisoned patients relies heavily on certified poison centers in the US and that only a few hospitals have well developed medical toxicology services. In contrast, in Iran, the poison center system is somehow less developed and the care of poisoned patients is provided in centralized high volume hospital poison units.Although both the US and Iran have highly developed systems for the care of poisoned patients they are distinctly different. Comparative studies based on these systems could provide important data for developing countries with more rudimentary poison control and treatment facilities.

  10. A rare case report of Strychnos nux-vomica poisoning with bradycardia

    Directory of Open Access Journals (Sweden)

    Lesley Ponraj

    2017-01-01

    Full Text Available Strychnine poisoning is a rare method of deliberate self-harm in adults. Poisoning with strychnine leaves is a rare form of strychnine poisoning, as the usual plant parts used are nuts, bark, and seeds. Although the common cardiac manifestations of strychnine positioning include tachycardia and hypertension, we report a patient with mild strychnine poisoning with bradycardia.

  11. Accidental Poisoning with Otapiapia: a Local Organophasphate ...

    African Journals Online (AJOL)

    Children are prone to accidental poisoning. We report this fatal organophosphate poisoning of a 3-year-old Nigerian boy following accidental ingestion of a homemade cocktail of kerosene and 'Otapiapia': a local rodenticide to highlight the dangers inherent in un-regulated production, home use and storage of this ...

  12. Mercury poisoning | Shamley | South African Medical Journal

    African Journals Online (AJOL)

    The diagnosis of mercury poisoning requires a high index of suspicion. Mercury poisoning in a patient involved in illicit gold extraction is reported and 6 other cases considered. Some of the clinical features and treatment of this condition are discussed. S Afr Med J 1989; 76: 114-116 ...

  13. Poisons Implicated In Homicidal, Suicidal And Accidental Cases In North-West Pakistan.

    Science.gov (United States)

    Jan, Adil; Khan, Muhammad Jaffar; Humayun Khan, Muhammad Tariq; Masood Khan, Muhammad Tariq; Fatima, Sadia

    2016-01-01

    Pakistan has one of the highest prevalence of poisoning in the world. However, limited data exist on the frequency of poisons implicated in homicidal, suicidal, and accidental cases in North-West Pakistan (Khyber Pakhtunkhwa). This retrospective study of 353 cases and biological specimens of poisoning received at the department of Forensic medicine and toxicology, Khyber Medical College Peshawar from 13 districts of Khyber Pakhtunkhwa. Frequency of poisoning was assessed by testing each specimen for 17 different poisons. Of all the specimens, 250 (70.8%) specimens tested positive and the rest didn't show any indication of poisoning (n=103, 29.2%). The most frequent poisons detected were benzodiazepines (total n=75), organophosphates (total n=58), phencyclidine (total n=30) and morphine (total n=23). Gender had a significant association with benzodiazepines (p=0.011), tricyclic antidepressants (p=0.001), and organophosphates (ppoisoning in females while benzodiazepines were the most common cause of poisoning in males. Poisoning by benzodiazepines, organophosphates and phencyclidine are the most common causes of intoxication in population of Khyber Pakhtunkhwa. Source of poisoning varies with gender for organophosphates, benzodiazepines and tricyclic antidepressants.

  14. Preoperative short hookwire placement for small pulmonary lesions: evaluation of technical success and risk factors for initial placement failure.

    Science.gov (United States)

    Iguchi, Toshihiro; Hiraki, Takao; Matsui, Yusuke; Fujiwara, Hiroyasu; Masaoka, Yoshihisa; Tanaka, Takashi; Sato, Takuya; Gobara, Hideo; Toyooka, Shinichi; Kanazawa, Susumu

    2018-05-01

    To retrospectively evaluate the technical success of computed tomography fluoroscopy-guided short hookwire placement before video-assisted thoracoscopic surgery and to identify the risk factors for initial placement failure. In total, 401 short hookwire placements for 401 lesions (mean diameter 9.3 mm) were reviewed. Technical success was defined as correct positioning of the hookwire. Possible risk factors for initial placement failure (i.e., requirement for placement of an additional hookwire or to abort the attempt) were evaluated using logistic regression analysis for all procedures, and for procedures performed via the conventional route separately. Of the 401 initial placements, 383 were successful and 18 failed. Short hookwires were finally placed for 399 of 401 lesions (99.5%). Univariate logistic regression analyses revealed that in all 401 procedures only the transfissural approach was a significant independent predictor of initial placement failure (odds ratio, OR, 15.326; 95% confidence interval, CI, 5.429-43.267; p < 0.001) and for the 374 procedures performed via the conventional route only lesion size was a significant independent predictor of failure (OR 0.793, 95% CI 0.631-0.996; p = 0.046). The technical success of preoperative short hookwire placement was extremely high. The transfissural approach was a predictor initial placement failure for all procedures and small lesion size was a predictor of initial placement failure for procedures performed via the conventional route. • Technical success of preoperative short hookwire placement was extremely high. • The transfissural approach was a significant independent predictor of initial placement failure for all procedures. • Small lesion size was a significant independent predictor of initial placement failure for procedures performed via the conventional route.

  15. Epidemiological Study of Poisoning in Teaching Hospitals in Shiraz in 1387

    Directory of Open Access Journals (Sweden)

    M. Aryaie

    2012-04-01

    Full Text Available Background/Objective: Poisoning is One common cause of referred cases , especially in the adolescent and young group to hospital emergency department. This study was designed to determine Epidemiologic of poisoning in teaching hospitals, shiraz in 1387 Methods: This is a cross-sectional study that 266 sample via random sampling with 95% confidence interval and α 0.05 were considered. Results: There were 47% female and 53% male. 67.2 percent of poisoned patient were single and 32.8% were married. This study showed, highest rate of poisoning was between the age of 20-35 years. Most common season of poisoning was in spring. Overall mortality of our study was 1.6 percent. Conclusions: Regional epidemiological information, make rational use of resources in order to prevention and control of poisoning and with using analysis of effective factors will be reduced poisoning by policymakers and planners.

  16. Drain cleaner poisoning

    Science.gov (United States)

    ... Activated charcoal, which is used to treat other types of poisoning does not effectively treat (adsorb) sodium hydroxide. For skin exposure, treatment may include: Surgical removal of burned skin (debridement) Transfer to a hospital that specializes in burn ...

  17. Clinical and electrocardiographic evaluation during experimental toad poisoning in dogs

    Directory of Open Access Journals (Sweden)

    AC Camplesi

    2010-01-01

    Full Text Available Accidents involving toad poisoning are frequent and dogs are the most common victims; they become poisoned by biting or ingesting a toad. When released in the organism, the venom is absorbed by both the oral mucosa and the digestive tract, initiating its toxic action. The aim of this work was to evaluate the clinical and electrocardiographic aspects of dogs subjected to experimental toad poisoning, as well as their response to treatment with propranolol. Twenty dogs were divided into two groups, a control group (n = 5 and a poisoned group (n = 15. After general anesthesia, the control group received a placebo, while the poisoned group received a venom aliquot through an orogastric tube. Results were tested through multivariate analysis (p < 0.05. The animals in the poisoned group had gastrointestinal symptoms including emesis, intense salivation, hyperemic or congested oral mucosa and pasty diarrhea. Non-responsive mydriasis, nystagmus, depression, stupor, tachypnea, opisthotonus and ataxia were also manifested by 100% of the poisoned animals. Affected dogs had an increase in blood pressure, statistically significant throughout study. Five poisoned animals developed ventricular tachycardia and were treated with propranolol (0.5 mg/kg IV. All propranolol-treated animals returned to normal sinus rhythm, which evidences the efficacy of this drug to treat ventricular arrhythmias caused by toad venom.

  18. Neutronic and thermal-hydraulic calculations for the AP-1000 NPP with the MCNP6 and SERPENT codes

    International Nuclear Information System (INIS)

    Stefani, Giovanni Laranjo; Maiorino, Jose R.; Santos, Thiago A.

    2015-01-01

    The AP-1000 is an evolutionary PWR reactor designed as an evolution of the AP-600 project. The reactor is already pre-licensed by NRC, and is considered to have achieved high standards of safety, possible short construction time and good economic competitiveness. The core is a 17x17 typical assembly using Zirlo as cladding, 3 different enrichment regions, and is controlled by boron, control banks, and burnable poison. The expected fuel final burnup is 62 MWD/ton U and a cycle of 18 months. In this paper we present results for neutronic and thermal-hydraulic calculations for the AP-1000. We use the MCNP6 and SERPENT codes to calculate the first cycle of operation. The calculated parameters are K eff at BOL and EOL and its variation with burnup and neutron flux, and reactivity coefficients. The production of transuranic elements such as Pu-239 and Pu-241, and burning fuel are calculated over time. In the work a complete reactor was burned for 450 days with no control elements, boron or burnable poison were considered, these results were compared with data provided by the Westinghouse. The results are compared with those reported in the literature. A simple thermal hydraulic analysis allows verification of thermal limits such as fuel and cladding temperatures, and MDNB. (author)

  19. Neutronic and thermal-hydraulic calculations for the AP-1000 NPP with the MCNP6 and SERPENT codes

    Energy Technology Data Exchange (ETDEWEB)

    Stefani, Giovanni Laranjo; Maiorino, Jose R.; Santos, Thiago A., E-mail: giovanni.laranjo@ufabc.edu.br, E-mail: joserubens.maiorino@ufabc.edu.br, E-mail: thiago.santos@ufabc.edu.br [Universidade Federal do ABC (CECS/UFABC), Santo Andre, SP (Brazil). Centro de Engenharia, Modelagem e Ciencias Sociais; Rossi, Pedro R., E-mail: pedro.russorossi@gmail.com [FERMIUM - Tecnologia Nuclear, Sao Paulo, SP (Brazil)

    2015-07-01

    The AP-1000 is an evolutionary PWR reactor designed as an evolution of the AP-600 project. The reactor is already pre-licensed by NRC, and is considered to have achieved high standards of safety, possible short construction time and good economic competitiveness. The core is a 17x17 typical assembly using Zirlo as cladding, 3 different enrichment regions, and is controlled by boron, control banks, and burnable poison. The expected fuel final burnup is 62 MWD/ton U and a cycle of 18 months. In this paper we present results for neutronic and thermal-hydraulic calculations for the AP-1000. We use the MCNP6 and SERPENT codes to calculate the first cycle of operation. The calculated parameters are K{sub eff} at BOL and EOL and its variation with burnup and neutron flux, and reactivity coefficients. The production of transuranic elements such as Pu-239 and Pu-241, and burning fuel are calculated over time. In the work a complete reactor was burned for 450 days with no control elements, boron or burnable poison were considered, these results were compared with data provided by the Westinghouse. The results are compared with those reported in the literature. A simple thermal hydraulic analysis allows verification of thermal limits such as fuel and cladding temperatures, and MDNB. (author)

  20. Delayed encephalopathy after acute carbon monoxide poisoning

    Directory of Open Access Journals (Sweden)

    Mehmet İbrahim Turan

    2014-03-01

    Full Text Available Carbon monoxide poisoning is a major cause of death following attempted suicide and accidental exposures. Although clinical presentation depends on the duration and the intensity of exposure, the assessment of the severity of intoxication is difficult. A small percentage of patients who show complete initial recovery may develop delayed neurological deficits. Delayed encephalopathy after acute carbon monoxide poisoning is a rare and poor prognosis neurologic disorders and there is no specific treatment. We present a case with early onset of delayed encephalopathy after acute carbon monoxide poisoning with typical cranial imaging findings in a child with atypical history and clinical presentation.

  1. Fatal poisoning among patients with drug addiction

    DEFF Research Database (Denmark)

    Simonsen, Kirsten Wiese; Christoffersen, Dorte J; Banner, Jytte

    2015-01-01

    INTRODUCTION: Fatal poisonings among drug addicts in Denmark in 2012 were examined. Cause of death, abuse pattern and geographic differences are discussed and data are compared with previous studies. METHODS: All fatal poisonings examined at the three institutes of forensic medicine in Denmark...... on Funen and in South Jutland. Cocaine was most frequently detected in East Denmark, while amphetamine was more frequent in West Denmark. CONCLUSIONS: The number of fatal poisonings among drug addicts has stabilised around 200. The increase in methadone deaths continued and, as in 2007, methadone...... with 2007, indicating that a considerable number of drug addicts also have psychiatric illness. FUNDING: none. TRIAL REGISTRATION: not relevant....

  2. Fatal poisoning among patients with drug addiction

    DEFF Research Database (Denmark)

    Simonsen, K. W.; Christoffersen, D. J.; Banner, J.

    2015-01-01

    Introduction: Fatal poisonings among drug addicts in Denmark in 2012 were examined. Cause of death, abuse pattern and geographic differences are discussed and data are compared with previous studies. Methods: All fatal poisonings examined at the three institutes of forensic medicine in Denmark...... on Funen and in South Jutland. Cocaine was most frequently detected in East Denmark, while amphetamine was more frequent in West Denmark. ConclusionS: The number of fatal poisonings among drug addicts has stabilised around 200. The increase in methadone deaths continued and, as in 2007, methadone...... with 2007, indicating that a considerable number of drug addicts also have psychiatric illness....

  3. Self-poisoning with baclofen in alcohol-dependent patients: national reports to French Poison Control Centers, 2008-2013.

    Science.gov (United States)

    Pelissier, Fanny; de Haro, Luc; Cardona, Florence; Picot, Cyndie; Puskarczyk, Emmanuel; Sapori, Jean-Marc; Tournoud, Christine; Franchitto, Nicolas

    2017-04-01

    Alcohol use disorders are frequently associated with self-intoxication in attempted suicide. In France since 2008, the off-label use of baclofen for treatment of alcohol dependence has greatly increased, leading to temporary regulation of use of the drug. At the request of the national authorities, the French Poison Control Centers carried out a retrospective survey to give an overview of baclofen exposure in this population. A retrospective study was carried out from January 2008 to December 2013, focusing on baclofen exposures in alcohol-dependent patients managed by the nine national French Poison Control Centers. 294 observations of baclofen exposures in alcohol-dependent patients were identified in our database. Of these, 220 were suicide attempts by self-poisoning and 74 were unintentional. The mean age of patients was 41.7 years, with a sex-ratio of 1.6. Patients attempting suicide with baclofen were younger than those with unintentional exposures, and 43.6% of them were women (vs 22.9%, p < 0.01). The mean supposed ingested dose was higher (480.7 mg) in patients who attempted suicide (vs 192.5 mg, p < 0.0001). 21.8% of intentional exposures involved baclofen alone. Psychiatric comorbidity (50.4%) was more frequent in the group of self-poisoning (p < 0.001). 132 patients were coded as severely exposed (60.0%). Nine victims died, but the causal link between self-poisoning with baclofen and fatal outcome should be interpreted with particular caution. Baclofen self-poisoning by alcohol-dependent patients is a serious concern for the French health authorities. Our results are similar to those previously published, suggesting that most patients with baclofen overdose should be admitted to an intermediate or intensive care unit as the clinical course requires close monitoring. Because suicidal ideation and suicide attempts are more prevalent in people with substance use disorders than in the general population, and because of the lack of

  4. AUTOLOAD, an automatic optimal pressurized water reactor reload design system with an expert module

    International Nuclear Information System (INIS)

    Li, Z.; Levine, S.H.

    1994-01-01

    An automatic optimal pressurized water reactor (PWR) reload design expert system AUTOLOAD has been developed. It employs two important new techniques. The first is a new loading priority scheme that defines the optimal placement of the fuel in the core that has the maximum end-of-cycle state k eff . The second is a new power-shape-driven progressive iteration method for automatically determining the burnable poison (BP) loading in the fresh fuel assemblies. The Haling power distribution is used in converting the theoretically optimal solution into the practical design, which meets the design constraints for the given fuel assemblies. AUTOLOAD is a combination of C and FORTRAN languages. It requires only the required cycle length, the maximum peak normalized power, the BP type, the number of fresh fuel assemblies, the assembly burnup, and BP histories of the available fuel assemblies as its input. Knowledge-based modules have been built into the expert system computer code to perform all of the tasks involved in reloading a PWR. AUTOLOAD takes only ∼ 30 CPU min on an IBM 3090 600s mainframe to accomplish a practical reload design. A maximum of 12.5% fresh fuel enrichment saving is observed compared with the core used by the utility

  5. Cartap poisoning: A rare case report.

    Science.gov (United States)

    Kumar, A S Praveen; Amalnath, Deepak; Dutta, T K

    2011-10-01

    Cartap is a pesticide commonly used to control weevil and caterpillars. It is an analogue of nereistoxin, a neurotoxic substance isolated from the marine annelid Lumbriconereis heteropoda. It causes neuromuscular blockade. Poisoning with cartap is very rare and not yet reported from India. We report a 35-year-old lady with cartap poisoning who presented with nausea, vomiting, and dyspnea. She improved with N-acetyl cysteine and symptomatic management.

  6. Cartap poisoning: A rare case report

    OpenAIRE

    Kumar, A. S. Praveen; Amalnath, Deepak; Dutta, T. K.

    2011-01-01

    Cartap is a pesticide commonly used to control weevil and caterpillars. It is an analogue of nereistoxin, a neurotoxic substance isolated from the marine annelid Lumbriconereis heteropoda. It causes neuromuscular blockade. Poisoning with cartap is very rare and not yet reported from India. We report a 35-year-old lady with cartap poisoning who presented with nausea, vomiting, and dyspnea. She improved with N-acetyl cysteine and symptomatic management.

  7. Lipid resuscitation in acute poisoning

    DEFF Research Database (Denmark)

    Hoegberg, Lotte C G; Gosselin, Sophie

    2017-01-01

    PURPOSE OF REVIEW: The decision to provide intravenous lipid emulsion (ILE) therapy as a treatment modality for the reversal of various drug toxicity was discovered in the last decade. Numerous publications, in both humans and animals attest to its clinical use, but current supporting evidence...... is inconsistent. RECENT FINDINGS: A recent systematic review reported evidence for benefit of ILE in bupivacaine toxicity. Human randomized trials, large observational studies as well as animal models of orogastric poisoning failed to report a clear benefit of ILE for nonlocal anesthetics poisoning. SUMMARY: ILE...

  8. [Living conditions and pattern of acute poisonings in Oslo].

    Science.gov (United States)

    Kolvik, Hallgeir Mæsel; Heyerdahl, Fridtjof; Bjørnaas, Mari Asphjell; Hovda, Knut Erik; Jacobsen, Dag; Ekeberg, Øivind

    2011-08-09

    Hospitalized patients with acute poisoning come from all classes of society. The relationship between living conditions and pattern of poisoning is, however, unclear. The aim of this study was to examine the connection between living conditions in Oslo and the pattern of acute poisonings, measured by incidence, main toxic agents and intention. A one-year multi-centre study with prospective inclusion of all patients ≥ 18 years of age with a registered address in Oslo admitted to an Oslo hospital with acute poisoning from 1 April 2003 through 31 March 2004. The 15 city districts were grouped into three, according to the official living conditions index in Oslo: city district group 1 (best living conditions), city district group 2 (average living conditions) and city district group 3 (most difficult living conditions). Of a total of 947 patients admitted with acute poisoning as their main diagnosis in the study period, 691 were included in the study, 660 of whom had self-inflicted poisoning. In city district group 3, the annual incidence of acute poisonings was 2.14 per 1000 inhabitants, significantly higher than city district group 2, with 1.50 (p < 0.001), and city district group 1, with 1.36 (p < 0.001). Measured as intention assessed by the treating physician, suicidal and drug related poisonings and those induced by a "cry for help" were more common in city district group 3 (0.74, 0.59 and 0.74 per 1000 inhabitants, respectively) than in city district group 2 (0.62, 0.40 and 0.41, respectively) and city district group 1 (0.52, 0.32 and 0.45, respectively). The main toxic agents were predominantly benzodiazepines (20 %), ethanol (18 %) and paracetamol (12 %). There were no statistically significant differences in the distribution of main toxic agents between the city district groups. The findings show a social gradient, with the highest incidence of poisonings in the city district group with the most difficult living conditions.

  9. Carbon monoxide poisoning

    Science.gov (United States)

    ... Animals can also be poisoned by carbon monoxide. People who have pets at home may notice that their animals become ... or unresponsive from carbon monoxide exposure. Often the pets will ... these conditions. This can lead to a delay in getting help.

  10. Argument Strategies: Antidote to Tylenol's Poisoned Image.

    Science.gov (United States)

    Benoit, William L.; Lindsey, James J.

    1987-01-01

    Analyzes how the manufacturer dealt with the Tylenol poisonings: the link between Tylenol and the poisoning was denied, its image as a safe product was bolstered, capsules were differentiated from other products, and as a result, sales recovered. Extends the applicability of apologia as a way to analyze other media campaigns. (SKC)

  11. Poisonings in the Nordic countries in 2007

    DEFF Research Database (Denmark)

    Andrew, Erik; Tellerup, Markus; Termälä, Anna-Mariia

    2012-01-01

    To map mortality and morbidity of poisonings in Denmark, Finland, Iceland, Norway and Sweden in 2007 and undertake a comparison with a corresponding study in 2002.......To map mortality and morbidity of poisonings in Denmark, Finland, Iceland, Norway and Sweden in 2007 and undertake a comparison with a corresponding study in 2002....

  12. Profile of hospital Admissions of childhood poisoning at a North ...

    African Journals Online (AJOL)

    Background: Childhood poisoning is an important but preventable cause of morbidity and mortality in the paediatric subpopulation. There is the continuous need to describe the pattern of childhood poisoning and to create public awareness on the common agents of poison in this environment. Objectives: To determine the ...

  13. International Variability in Gastrointestinal Decontamination With Acute Poisonings.

    Science.gov (United States)

    Mintegi, Santiago; Dalziel, Stuart R; Azkunaga, Beatriz; Prego, Javier; Arana-Arri, Eunate; Acedo, Yordana; Martinez-Indart, Lorea; Benito, Javier; Kuppermann, Nathan

    2017-08-01

    Identifying international differences in the management of acute pediatric poisonings may help improve the quality of care. The objective of this study was to assess the international variation and appropriateness of gastrointestinal decontamination (GID) procedures performed in children and adolescents who present with acute poisonings to emergency departments. This was an international, multicenter, cross-sectional prospective study including children poisoning exposures presenting to 105 emergency departments in 20 countries from 8 global regions belonging to the Pediatric Emergency Research Networks. Data collection started between January and September 2013 and continued for 1 year. The appropriateness of GID procedures performed was analyzed using the American Academy of Clinical Toxicology and the European Association of Poisons Centres and Clinical Toxicologists' recommendations. Multivariate logistic regression was performed to identify independent risk factors for performing GID procedures. We included 1688 patients, 338 of whom (20.0%, 95% confidence interval 18.1%-22.0%) underwent the following GID procedures: activated charcoal (166, 49.1%), activated charcoal and gastric lavage (122, 36.1%), gastric lavage (47, 13.9%), and ipecac (3, 0.9%). In 155 (45.8%, 40.5%-51.2%), the GID procedure was considered appropriate, with significant differences between regions. Independent risk factors for GID procedures included age, toxin category, mechanism of poisoning, absence of symptoms, and the region where the intoxication occurred ( P management of pediatric poisonings. International best practices need to be better implemented. Copyright © 2017 by the American Academy of Pediatrics.

  14. CFD analysis of poison injection in AHWR calandria

    International Nuclear Information System (INIS)

    Kansal, A.K.; Kamble, M.T.; Maheshwari, N.K.; Vijayan, P.K.

    2014-01-01

    The present work intends to give details of design and performance validation of SDS-2. The performance is evaluated on the basis of dispersion of poison in calandria in a given period of time. Location of injection tube and injection holes, size of jet hole and number of holes are some of the design parameters which greatly affect dispersion of poison in calandria. A Computational Fluid Dynamic (CFD) study for axial and radial injection of poison was carried out using open source CFD code OpenFOAM. CFD benchmarking was done using experiments performed by Johari (Johari et al. 1997) to identify suitable turbulence model for this problem. An experimental facility simulating poison injection in moderator in presence of calandria tubes was used to further validate the CFD model is shown in the paper. CFD analysis was carried out for axial as well as radial injection for AHWR geometry. CFD analysis using OpenFOAM has been carried out to study high pressure poison injection for single jet of Shut Down System - 2 (SDS- 2) of Advanced Heavy Water Reactor (AHWR) for various design options. CFD model used in analysis have been validated with experimental data available in literature as well as experiments performed for AHWR specific geometry. Various turbulence models are tested and their adequacy for such flow problems has been established. The CFD model is then used to simulate poison injection for two design options for AHWR and their performance is compared. (author)

  15. [Acute poisoning in patients over 65 years of age].

    Science.gov (United States)

    Miranda Arto, P; Ferrer Dufol, A; Ruiz Ruiz, F J; Menao Guillén, S; Civeira Murillo, E

    2014-01-01

    There are few Spanish studies on acute poisoning in the elderly despite the associated risk factors of this group of patients. Retrospective descriptive study of acute poisonings treated in the Emergency Service of the University Hospital of Zaragoza from 1995 to 2009 on patients 65 years old or older. A total of 762 patients were selected in the study (4.74% of all acute poisonings) with a mean age of 74.16 (SD ± 6) years. Ingestion was the major route of exposure (85%) and alcohol overdose (28,7%) was the most frequent type of poisoning. A trend was also observed showing a lower emetic treatment and gastric lavage and an increase in activated charcoal. Benzodiazepines (14.3%) and toxic household products (11%) with caustic properties were also the main toxics found in the study. Acute poisonings in the elderly required more hospitalizations, have a higher mortality and more autolytic attempts which result in death.

  16. [Characteristics of emergency poisoning cases in elderly versus younger patients].

    Science.gov (United States)

    Supervía Caparrós, August; Pallàs Villaronga, Oriol; Clemente Rodríguez, Carlos; Aranda Cárdenas, María Dolores; Pi-Figueras Valls, María; Cirera Lorenzo, Isabel

    2017-10-01

    To compare cases of poisoning according to age to detect differences in frequency of visits to the emergency department, patient characteristics, case management, and immediate outcome in terms of related mortality. Descriptive study of a retrospective series of patients who visited a university hospital emergency department for treatment of poisoning between 2009 and 2014. We collected patient characteristics and data related to the event, case management, and poisoning-related death. Patients were grouped according to age (cut-off 65 y). Of a total of 3847 poisoning episodes, 341 (8.9%) were in patients aged 65 years or older. The percentage of women among these older patients (61.3%) was greater than among younger patients (36.3%; P<.001). Poisoning was accidental in older patients more often than younger ones (64.4% vs 9.5%, respectively; P<.001), occurred more often in the home (82.1% vs 37%, P<.001), and more often required active treatment (73.3% vs 57.4%; P<.001) and admission to hospital (21.4% vs 7.3%, P<.001). The related mortality rate was also higher in the older patients (2.1% vs 0.1% in younger patients, P<.001). The percentage of poisonings in patients aged 65 years or older is not negligible. Poisoning in patients of advanced age tends to be accidental and take place in the home. Older patients more often require active treatment and hospital admission; poisoning-related death is more common in older patients than younger ones.

  17. Four-Year Study on Acute Poisoning Cases Admitted to a Tertiary Hospital in Bangladesh: Emerging Trend of Poisoning in Commuters

    Directory of Open Access Journals (Sweden)

    Mohammad Shafiqul Bari

    2014-12-01

    Conclusion:Commuter or travel-related poisoning is an emerging public health threat in this part of Bangladesh. Public awareness should be raised and school-based educational programs should be emphasized regarding the commuter poisoning and the consequence of accepting and eating food from strangers.

  18. BP volume reduction equipment

    International Nuclear Information System (INIS)

    Kitamura, Yoshinori; Muroo, Yoji; Hamanaka, Isao

    2003-01-01

    A new type of burnable poison (BP) volume reduction system is currently being developed. Many BP rods, a subcomponent of spent fuel assemblies are discharged from nuclear power reactors. This new system reduces the overall volume of BP rods. The main system consists of BP rod cutting equipment, equipment for the recovery of BP cut pieces, and special transport equipment for the cut rods. The equipment is all operated by hydraulic press cylinders in water to reduce operator exposure to radioactivity. (author)

  19. POLX-1

    International Nuclear Information System (INIS)

    Ras, H.

    1991-03-01

    The capabilities of the POLX-1 code which was developed for the purpose of generating polynomial fits to neutron few-group cross sections as functions of soluble boron concentration, fuel temperature, moderator density and exposure in the reactor core are described. The effects of extracting removable burnable poison rods and the insertion of control rods are also parameterized as functions of the core conditions. Input data requirements and the format of the output file generated by POLX-1 are also described. 14 refs

  20. Nicotinic plant poisoning.

    Science.gov (United States)

    Schep, Leo J; Slaughter, Robin J; Beasley, D Michael G

    2009-09-01

    A wide range of plants contain nicotinic and nicotinic-like alkaloids. Of this diverse group, those that have been reported to cause human poisoning appear to have similar mechanisms of toxicity and presenting patients therefore have comparable toxidromes. This review describes the taxonomy and principal alkaloids of plants that contain nicotinic and nicotinic-like alkaloids, with particular focus on those that are toxic to humans. The toxicokinetics and mechanisms of toxicity of these alkaloids are reviewed and the clinical features and management of poisoning due to these plants are described. This review was compiled by systematically searching OVID MEDLINE and ISI Web of Science. This identified 9,456 papers, excluding duplicates, all of which were screened. Reviewed plants and their principal alkaloids. Plants containing nicotine and nicotine-like alkaloids that have been reported to be poisonous to humans include Conium maculatum, Nicotiana glauca and Nicotiana tabacum, Laburnum anagyroides, and Caulophyllum thalictroides. They contain the toxic alkaloids nicotine, anabasine, cytisine, n-methylcytisine, coniine, n-methylconiine, and gamma-coniceine. These alkaloids act agonistically at nicotinic-type acetylcholine (cholinergic) receptors (nAChRs). The nicotinic-type acetylcholine receptor can vary both in its subunit composition and in its distribution within the body (the central and autonomic nervous systems, the neuromuscular junctions, and the adrenal medulla). Agonistic interaction at these variable sites may explain why the alkaloids have diverse effects depending on the administered dose and duration of exposure. Nicotine and nicotine-like alkaloids are absorbed readily across all routes of exposure and are rapidly and widely distributed, readily traversing the blood-brain barrier and the placenta, and are freely distributed in breast milk. Metabolism occurs predominantly in the liver followed by rapid renal elimination. Following acute exposure